WorldWideScience

Sample records for maxillary alveolar ridges

  1. Alveolar ridge and maxillary sinus augmentation using rhBMP-2: a systematic review.

    Science.gov (United States)

    Freitas, Rubens Moreno de; Spin-Neto, Rubens; Marcantonio Junior, Elcio; Pereira, Luís Antônio Violin Dias; Wikesjö, Ulf M E; Susin, Cristiano

    2015-01-01

    The aim of this systematic review was to evaluate clinical and safety data for recombinant human bone morphogenetic protein-2 (rhBMP-2) in an absorbable collagen sponge (ACS) carrier when used for alveolar ridge/maxillary sinus augmentation in humans. Clinical studies/case series published 1980 through June 2012 using rhBMP-2/ACS were searched. Studies meeting the following criteria were considered eligible for inclusion: >10 subjects at baseline and maxillary sinus or alveolar ridge augmentation not concomitant with implant placement. Seven of 69 publications were eligible for review. rhBMP-2/ACS yielded clinically meaningful bone formation for maxillary sinus augmentation that would allow placement of regular dental implants without consistent differences between rhBMP-2 concentrations. Nevertheless, the statistical analysis showed that sinus augmentation following autogenous bone graft was significantly greater (mean bone height: 1.6 mm, 95% CI: 0.5-2.7 mm) than for rhBMP-2/ACS (rhBMP-2 at 1.5 mg/mL). In extraction sockets, rhBMP-2/ACS maintained alveolar ridge height while enhancing alveolar ridge width. Safety reports did not represent concerns for the proposed indications. rhBMP-2/ACS appears a promising alternative to autogenous bone grafts for alveolar ridge/maxillary sinus augmentation; dose and carrier optimization may expand its efficacy, use, and clinical application. © 2013 Wiley Periodicals, Inc.

  2. Role of Cone Beam Computed Tomography in Rehabilitation of a Traumatised Deficient Maxillary Alveolar Ridge Using Symphyseal Block Graft Placement

    Directory of Open Access Journals (Sweden)

    Shipra Arora

    2013-01-01

    Full Text Available Deficiencies in the alveolar ridges cause multiple problems in achieving aesthetic and functional outcome of implant therapy and are commonly restored by using onlay graft from intraoral source. Careful assessment of the recipient as well as the donor site using cone beam computed tomography (CBCT is a prerequisite to ideal treatment planning. This paper highlights the critical role of CBCT in planning a successful rehabilitation of traumatised deficient anterior maxillary alveolar ridge using autogenous block graft from mandibular symphysis, followed by implant placement. A 21-year-old male reported with missing right maxillary lateral incisor due to traumatic avulsion 6 months back. A concavity was found on the labial aspect of edentulous area. Serial transplanar images on CBCT revealed gross irregular radiolucency in place of labial cortical plate. Using CBCT, size of the required block was estimated, and mandibular symphyseal area was evaluated for the feasibility of harvesting a graft of suitable dimension. Onlay block graft was harvested from mandibular symphysis and placed at the edentulous site to augment the alveolar ridge. Implants were placed 5 months later and loaded successfully after osseointegration. After 1 year of followup, implant-based prosthesis is working well, without any complications.

  3. Systematic Review and Meta-Analysis of Recombinant Human Bone Morphogenetic Protein-2 in Localized Alveolar Ridge and Maxillary Sinus Augmentation.

    Science.gov (United States)

    Kelly, Mick P; Vaughn, Olushola L Akinshemoyin; Anderson, Paul A

    2016-05-01

    Recombinant human bone morphogenetic protein-2 (rhBMP-2) is approved by the Food and Drug Administration as a viable alternative to bone graft in spinal fusion and maxillary sinus lift. The research questions for meta-analysis were: Is rhBMP-2 an effective bone graft substitute in localized alveolar ridge augmentation and maxillary sinus floor augmentation? What are the potential adverse events? A search of MEDLINE from January 1980 to January 2014 using PubMed, the Cochrane Database of Systematic Reviews and Controlled Trials, CINAHL, and EMBASE was performed. Searches were performed from Medical Subject Headings. The quality of each study included was graded by Review Manager software. The primary outcome variable was bone formation measured as change in bone height on computed tomogram. A systematic review of adverse events also was performed. A random-effects model was chosen. Continuous variables were calculated using the standardized mean difference and 95% confidence intervals (CIs) comparing improvement from baseline of the experimental group with that of the control group. Change in bone height was calculated using logarithmic odds ratio. Test of significance used the Z statistic with a P value of .05. Ten studies met the criteria for systematic review; 8 studies were included in the meta-analysis. Five studies assessed localized alveolar ridge augmentation and resulted in an overall standardized mean difference of 0.56 (CI, 0.20-0.92) in favor of BMP; this result was statistically important. Three studies assessed maxillary sinus floor augmentation and resulted in an overall standardized mean difference of -0.50 (CI, -0.93 to -0.09), which was meaningfully different in favor of the control group. Adverse events were inconsistently reported, ranging from no complications to widespread adverse events. For localized alveolar ridge augmentation, this meta-analysis showed that rhBMP-2 substantially increases bone height. However, rhBMP-2 does not perform as

  4. Histomorhological and clinical evaluation of maxillary alveolar ridge reconstruction after craniofacial trauma by applying combination of allogeneic and autogenous bone graft

    Directory of Open Access Journals (Sweden)

    Francesco Saverio De Ponte

    2017-02-01

    Full Text Available A variety of techniques and materials for the rehabilitation and reconstruction of traumatized maxillary ridges prior to dental implants placement have been described in literature. Autogenous bone grafting is considered ideal by many researchers and it still remains the most predictable and documented method. The aim of this report is to underline the effectiveness of using allogeneic bone graft for managing maxillofacial trauma. A case of a 30-year-old male with severely atrophic maxillary ridge as a consequence of complex craniofacial injury is presented here. Augmentation procedure in two stages was performed using allogeneic and autogenous bone grafts in different areas of the osseous defect. Four months after grafting, during the implants placement surgery, samples of both sectors were withdrawn and submitted to histological evaluation. On the examination of the specimens, treated by hematoxylin and eosin staining, the morphology of integrated allogeneic bone grafts was revealed to be similar to the autologous bone. Our clinical experience shows how the allogeneic bone graft presented normal bone tissue architecture and is highly vascularized, and it can be used for reconstruction of severe trauma of the maxilla.

  5. Histomorhological and clinical evaluation of maxillary alveolar ridge reconstruction after craniofacial trauma by applying combination of allogeneic and autogenous bone graft.

    Science.gov (United States)

    De Ponte, Francesco Saverio; Falzea, Roberto; Runci, Michele; Siniscalchi, Enrico Nastro; Lauritano, Floriana; Bramanti, Ennio; Cervino, Gabriele; Cicciu, Marco

    2017-02-01

    A variety of techniques and materials for the rehabilitation and reconstruction of traumatized maxillary ridges prior to dental implants placement have been described in literature. Autogenous bone grafting is considered ideal by many researchers and it still remains the most predictable and documented method. The aim of this report is to underline the effectiveness of using allogeneic bone graft for managing maxillofacial trauma. A case of a 30-year-old male with severely atrophic maxillary ridge as a consequence of complex craniofacial injury is presented here. Augmentation procedure in two stages was performed using allogeneic and autogenous bone grafts in different areas of the osseous defect. Four months after grafting, during the implants placement surgery, samples of both sectors were withdrawn and submitted to histological evaluation. On the examination of the specimens, treated by hematoxylin and eosin staining, the morphology of integrated allogeneic bone grafts was revealed to be similar to the autologous bone. Our clinical experience shows how the allogeneic bone graft presented normal bone tissue architecture and is highly vascularized, and it can be used for reconstruction of severe trauma of the maxilla. Copyright © 2017 Daping Hospital and the Research Institute of Surgery of the Third Military Medical University. Production and hosting by Elsevier B.V. All rights reserved.

  6. PERFORATION OF INFERIOR ALVEOLAR NERVE BY MAXILLARY ARTERY. Perforation of inferior alveolar nerve by maxillary artery

    Directory of Open Access Journals (Sweden)

    Prakash B Billakanti

    2016-03-01

    Full Text Available La fosa infratemporal es un área anatómica clínicamente importante para la administración de agentes anestésicos locales en odontología y cirugía maxilofacial. Fueron estudiadas variaciones en la anatomía del nervio alveolar inferior y la arteria maxilar en la disección infratemporal. Durante la disección rutinaria de la cabeza en el cadáver de un varón adulto, fue observada una variación excepcional en el origen del nervio alveolar inferior y su relación con las estructuras circundantes. El nervio alveolar inferior se originaba en el nervio mandibular por dos raíces y la primera parte de la arteria maxilar estaba incorporada entre ambas. El origen embriológico de esta variación y sus implicaciones clínicas es debatido. Dado que la arteria maxilar transcurría entre las dos raíces del nervio alveolar inferior, y el nervio estaba fijado entre el foramen oval y el foramen mandibular, el atrapamiento vásculo-nervioso pudo causar entume-cimiento o dolor de cabeza e interferir con la inyección de anestésicos locales en la fosa infratemporal.  Variaciones anatómicas en esta región deben ser tenidas en cuenta, especialmente en casos de tratamiento fallido de neuralgia del trigémino. Infratemporal fossa is clinically important anatomical area for the delivery of local anesthetic agents in dentistry and maxillofacial surgery. Variations in the anatomy of the inferior alveolar nerve and maxillary artery were studied in infratemporal dissection. During routine dissection of the head in an adult male cadaver an unusual variation in the origin of the inferior alveolar nerve and its relationship with the surrounding structures was observed. The inferior alveolar nerve originated from the mandibular nerve by two roots and the first part of the maxillary artery was incorporated between them. An embryologic origin of this variation and its clinical implications is discussed. Because the maxillary artery runs between the two roots of

  7. Alveolar Ridge Carcinoma. Two Cases Report

    International Nuclear Information System (INIS)

    Pupo Triguero, Raul J; Vivar Bauza, Miriam; Alvarez Infante, Elisa

    2008-01-01

    Two cases with alveolar ridge carcinoma due to prosthetist traumatism are discussed in this paper, after 9 and 10 years of using dental prosthesis. Both patients began with disturbance in the alveolar ridge. The clinical examination and biopsy showed a well differenced carcinoma. The treatment was radical surgery and radiotherapy in the first patient, and conservative surgery with radiotherapy in the second case .The patients had xerostomia after radiotherapy and the woman had difficulties with mastication. The advantages and disadvantages of the treatment were discussed, focused on the prevention and treatment for oral

  8. Alveolar ridge augmentation by osteoinduction in rats

    DEFF Research Database (Denmark)

    Pinholt, E M; Bang, G; Haanaes, H R

    1990-01-01

    The purpose of this study was to evaluate bone substitutes for alveolar ridge augmentation by osteoinduction. Allogenic, demineralized, and lyophilized dentin and bone was tested for osteoinductive properties in order to establish an experimental model for further studies. Implantations were perf...

  9. Classification of alveolar bone destruction patterns on maxillary ...

    African Journals Online (AJOL)

    Objective: The defective diagnosis of alveolar structures is one of most serious handicaps when assessing available periodontal treatment options for the prevention of tooth loss. The aim of this research was to classify alveolar bone defects in the maxillary molar region which is a challenging area for dental implant ...

  10. Alveolar ridge keratosis - a retrospective clinicopathological study

    Science.gov (United States)

    2013-01-01

    Background Alveolar ridge keratosis (ARK) is a distinct, benign clinicopathological entity, characterized by a hyperkeratotic plaque or patch that occurs on the alveolar edentulous ridge or on the retromolar trigone, considered to be caused by chronic frictional trauma. The aim of this retrospective study is to present the clinicopathological features of 23 consecutive cases of ARK. Material and methods The 23 biopsy samples of ARK were selected and pathological features were revised (keratosis, acanthosis, surface architecture, and inflammation). Factors such as the patient’s gender, age, anatomical location, tobacco and alcohol use were analyzed. Results Sixteen out of the 23 cases studied were men and 7 women with a mean age of 55.05 (age ranged from 17 to 88 years). Thirteen cases had a history of tobacco habit, amongst whom, 4 also presented alcohol consumption. All the cases presented only unilateral lesions. Nineteen cases involved the retromolar trigone while 4 cases involved edentulous alveolar ridges. When observed microscopically, the lesions were mainly characterized by moderate to important hyperorthokeratosis. Inflammation was scanty or absent. In four of the cases, the presence of melanin pigment in the superficial corium or in the cytoplasm of macrophages was detected. None of the cases showed any features of dysplasia. Conclusion Our results reveal that ARK is a benign lesion. However, the high prevalence of smokers amongst the patients might suggest that some potentially malignant disorders such as tobacco associated leukoplakia may clinically mimic ARK. PMID:23587097

  11. Comparison of Bone Resorption Rates after Intraoral Block Bone and Guided Bone Regeneration Augmentation for the Reconstruction of Horizontally Deficient Maxillary Alveolar Ridges

    Directory of Open Access Journals (Sweden)

    B. Alper Gultekin

    2016-01-01

    Full Text Available Purpose. Bone atrophy after tooth loss may leave insufficient bone for implant placement. We compared volumetric changes after autogenous ramus block bone grafting (RBG or guided bone regeneration (GBR in horizontally deficient maxilla before implant placement. Materials and Methods. In this retrospective study, volumetric changes at RBG or GBR graft sites were evaluated using cone-beam computed tomography. The primary outcome variable was the volumetric resorption rate. Secondary outcomes were bone gain, graft success, and implant insertion torque. Results. Twenty-four patients (28 grafted sites were included (GBR, 15; RBG, 13. One patient (RBG suffered mucosal dehiscence at the recipient site 6 weeks after surgery, which healed spontaneously. Mean volume reduction in the GBR and RBG groups was 12.48 ± 2.67% and 7.20 ± 1.40%, respectively. GBR resulted in significantly more bone resorption than RBG (P0.05. Conclusions. Both RBG and GBR hard-tissue augmentation techniques provide adequate bone graft volume and stability for implant insertion. However, GBR causes greater resorption at maxillary augmented sites than RBG, which clinicians should consider during treatment planning.

  12. Pre prosthetic reconstruction of alveolar ridge

    Directory of Open Access Journals (Sweden)

    Prabhuji Munivenkatappa Lakshmaiahenkatesh

    2011-01-01

    Full Text Available Dento-alveolar bony defects are common and occur due to a variety of causes, such as, pulpal pathology, traumatic tooth extraction, advanced periodontal disease, implant failure, tumor or congenital anomalies. These defects often cause a significant problem in dental treatment and rehabilitation. Many techniques exist for effective soft and hard tissue augmentation. The approach is largely based on the extent of the defect and specific procedures to be performed for the implant or prosthetic rehabilitation. This article presents case reports of soft and hard tissue ridge augmentation.

  13. Alveolar ridge rehabilitation to increase full denture retention and stability

    Directory of Open Access Journals (Sweden)

    Mefina Kuntjoro

    2010-12-01

    Full Text Available Background: Atrophic mandibular alveolar ridge generally complicates prostetic restoration expecially full denture. Low residual alveolar ridge and basal seat can cause unstable denture, permanent ulcer, pain, neuralgia, and mastication difficulty. Pre-proshetic surgery is needed to improve denture retention and stability. Augmentation is a major surgery to increase vertical height of the atrophic mandible while vestibuloplasty is aimed to increase the denture bearing area. Purpose: The augmentation and vestibuloplasty was aimed to provide stability and retentive denture atrophic mandibular alveolar ridge. Case: A 65 years old woman patient complained about uncomfortable denture. Clinical evaluate showed flat ridge in the anterior mandible, flabby tissue and candidiasis, while residual ridge height was classified into class IV. Case management: Augmentation using autograph was conducted as the mandible vertical height is less than 15 mm. Autograph was used to achieve better bone quantity and quality. Separated alveolar ridge was conducted from left to right canine region and was elevated 0.5 mm from the previous position to get new ridge in the anterior region. The separated alveolar ridge was fixated by using T-plate and ligature wire. Three months after augmentation fixation appliances was removed vestibuloplasty was performed to increase denture bearing area that can make a stable and retentive denture. Conclusion: Augmentation and vestibuloplasty can improve flat ridge to become prominent.Latar belakang: Ridge mandibula yang atrofi pada umumnya mempersulit pembuatan restorasi prostetik terutama gigi tiruan lengkap (GTL. Residual alveolar ridge dan basal seat yang rendah menyebabkan gigi tiruan menjadi tidak stabil, menimbulkan ulser permanen, nyeri, neuralgia, dan kesulitan mengunyah. Tujuan: Augmentasi dan vestibuloplasti pada ridge mandibula yang atrofi dilakukan untuk menciptakan gigi tiruan yang stabil dan retentive. Kasus: Pasien wanita

  14. Alveolar ridge rehabilitation to increase full denture retention and stability

    OpenAIRE

    Mefina Kuntjoro; Rostiny Rostiny; Wahjuni Widajati

    2010-01-01

    Background: Atrophic mandibular alveolar ridge generally complicates prostetic restoration expecially full denture. Low residual alveolar ridge and basal seat can cause unstable denture, permanent ulcer, pain, neuralgia, and mastication difficulty. Pre-proshetic surgery is needed to improve denture retention and stability. Augmentation is a major surgery to increase vertical height of the atrophic mandible while vestibuloplasty is aimed to increase the denture bearing area. Purpose: The augme...

  15. Alveolar Ridge Split Technique Using Piezosurgery with Specially Designed Tips

    Directory of Open Access Journals (Sweden)

    Alessandro Moro

    2017-01-01

    Full Text Available The treatment of patients with atrophic ridge who need prosthetic rehabilitation is a common problem in oral and maxillofacial surgery. Among the various techniques introduced for the expansion of alveolar ridges with a horizontal bone deficit is the alveolar ridge split technique. The aim of this article is to give a description of some new tips that have been specifically designed for the treatment of atrophic ridges with transversal bone deficit. A two-step piezosurgical split technique is also described, based on specific osteotomies of the vestibular cortex and the use of a mandibular ramus graft as interpositional graft. A total of 15 patients were treated with the proposed new tips by our department. All the expanded areas were successful in providing an adequate width and height to insert implants according to the prosthetic plan and the proposed tips allowed obtaining the most from the alveolar ridge split technique and piezosurgery. These tips have made alveolar ridge split technique simple, safe, and effective for the treatment of horizontal and vertical bone defects. Furthermore the proposed piezosurgical split technique allows obtaining horizontal and vertical bone augmentation.

  16. Alveolar Ridge Split Technique Using Piezosurgery with Specially Designed Tips.

    Science.gov (United States)

    Moro, Alessandro; Gasparini, Giulio; Foresta, Enrico; Saponaro, Gianmarco; Falchi, Marco; Cardarelli, Lorenzo; De Angelis, Paolo; Forcione, Mario; Garagiola, Umberto; D'Amato, Giuseppe; Pelo, Sandro

    2017-01-01

    The treatment of patients with atrophic ridge who need prosthetic rehabilitation is a common problem in oral and maxillofacial surgery. Among the various techniques introduced for the expansion of alveolar ridges with a horizontal bone deficit is the alveolar ridge split technique. The aim of this article is to give a description of some new tips that have been specifically designed for the treatment of atrophic ridges with transversal bone deficit. A two-step piezosurgical split technique is also described, based on specific osteotomies of the vestibular cortex and the use of a mandibular ramus graft as interpositional graft. A total of 15 patients were treated with the proposed new tips by our department. All the expanded areas were successful in providing an adequate width and height to insert implants according to the prosthetic plan and the proposed tips allowed obtaining the most from the alveolar ridge split technique and piezosurgery. These tips have made alveolar ridge split technique simple, safe, and effective for the treatment of horizontal and vertical bone defects. Furthermore the proposed piezosurgical split technique allows obtaining horizontal and vertical bone augmentation.

  17. Alveolar ridge augmentation by osteoinductive materials in goats

    DEFF Research Database (Denmark)

    Pinholt, E M; Haanaes, H R; Roervik, M

    1992-01-01

    The purpose of the present study was to determine whether alveolar ridge augmentation could be induced in goats. In 12 male goats allogenic, demineralized, and lyophilized dentin or bone was implanted subperiosteally on the buccal sides of the natural edentulous regions of the alveolar process...... of the mandible. Light microscopic evaluation revealed fibrous encapsulation, a few multinuclear giant cells, little inflammatory reaction, and no osteoinduction. It was concluded that no osteoinduction took place in goats....

  18. Alveolar bone changes after asymmetric rapid maxillary expansion.

    Science.gov (United States)

    Akin, Mehmet; Baka, Zeliha Muge; Ileri, Zehra; Basciftci, Faruk Ayhan

    2015-09-01

    To quantitatively evaluate the effects of asymmetric rapid maxillary expansion (ARME) on cortical bone thickness and buccal alveolar bone height (BABH), and to determine the formation of dehiscence and fenestration in the alveolar bone surrounding the posterior teeth, using cone-beam computed tomography (CBCT). The CBCT records of 23 patients with true unilateral posterior skeletal crossbite (10 boys, 14.06 ± 1.08 years old, and 13 girls, 13.64 ± 1.32 years old) who had undergone ARME were selected from our clinic archives. The bonded acrylic ARME appliance, including an occlusal stopper, was used on all patients. CBCT records had been taken before ARME (T1) and after the 3-month retention period (T2). Axial slices of the CBCT images at 3 vertical levels were used to evaluate the buccal and palatal aspects of the canines, first and second premolars, and first molars. Paired samples and independent sample t-tests were used for statistical comparison. The results suggest that buccal cortical bone thickness of the affected side was significantly more affected by the expansion than was the unaffected side (P ARME significantly reduced the BABH of the canines (P ARME also increased the incidence of dehiscence and fenestration on the affected side. ARME may quantitatively decrease buccal cortical bone thickness and height on the affected side.

  19. Alveolar ridge atrophy related to facial morphology in edentulous patients

    Directory of Open Access Journals (Sweden)

    Kuć J

    2017-09-01

    Full Text Available Joanna Kuć,1 Teresa Sierpińska,2 Maria Gołębiewska1 1Department of Prosthodontics, 2Department of Dental Technology, Medical University of Bialystok, Bialystok, Poland Objectives: The morphology of the alveolar process determines the retention and stability of prosthetic restorations, thereby determining the result of the therapy. Considering that the edentulous jaws may be affected by the atrophy process, it was hypothesized that the morphology of the alveolar process of the maxilla may be dependent on the anterior facial height and anatomy of the mandible. Subjects and methods: Twenty-five healthy edentulous Caucasian individuals were randomly chosen. Each subject underwent a lateral cephalogram before and after prosthetic rehabilitation. During exposition, newly made prostheses were placed in the patient’s mouth. Teeth remained in maximal intercuspidation. Morphological parameters were evaluated according to the Ricketts, McNamara, and Tallgren’s method. Results: An inversely proportional association was observed between patient age and the distal part of the maxilla. A statistically significant connection was noted between the vertical dimension of alveolar ridge and anterior total and lower facial height conditioned by prosthetic rehabilitation. Conclusion: The height of the lateral part of the alveolar ridge of the maxilla remains in connection with the anterior total and lower facial height obtained in the course of prosthetic rehabilitation. The vertical dimension of the alveolar ridge of the maxilla seems to be in close relationship with the morphology of the lower jaw. Keywords: anterior facial height, cephalometric analysis, complete dentures, vertical occlusal dimension

  20. Segmental maxillary distraction with a novel device for closure of a wide alveolar cleft.

    Science.gov (United States)

    Bousdras, Vasilios A; Liyanage, Chandra; Mars, Michael; Ayliffe, Peter R

    2014-01-01

    Treatment of a wide alveolar cleft with initial application of segmental distraction osteogenesis is reported, in order to minimise cleft size prior to secondary alveolar bone grafting. The lesser maxillary segment was mobilised with osteotomy at Le Fort I level and, a novel distractor, facilitated horizontal movement of the dental/alveolar segment along the curvature of the maxillary dental arch. Following a latency period of 4 days distraction was applied for 7 days at a rate of 0.5 mm twice daily. Radiographic, ultrasonographic and clinical assessment revealed new bone and soft tissue formation 8 weeks after completion of the distraction phase. Overall the maxillary segment did move minimising the width of the cleft, which allowed successful closure with a secondary alveolar bone graft.

  1. Alveolar ridge keratosis--a retrospective clinicopathological study.

    Science.gov (United States)

    Bellato, Lorenzo; Martinelli-Kläy, Carla P; Martinelli, Celso R; Lombardi, Tommaso

    2013-04-16

    Alveolar ridge keratosis (ARK) is a distinct, benign clinicopathological entity, characterized by a hyperkeratotic plaque or patch that occurs on the alveolar edentulous ridge or on the retromolar trigone, considered to be caused by chronic frictional trauma. The aim of this retrospective study is to present the clinicopathological features of 23 consecutive cases of ARK. The 23 biopsy samples of ARK were selected and pathological features were revised (keratosis, acanthosis, surface architecture, and inflammation). Factors such as the patient's gender, age, anatomical location, tobacco and alcohol use were analyzed. Sixteen out of the 23 cases studied were men and 7 women with a mean age of 55.05 (age ranged from 17 to 88 years). Thirteen cases had a history of tobacco habit, amongst whom, 4 also presented alcohol consumption. All the cases presented only unilateral lesions. Nineteen cases involved the retromolar trigone while 4 cases involved edentulous alveolar ridges. When observed microscopically, the lesions were mainly characterized by moderate to important hyperorthokeratosis. Inflammation was scanty or absent. In four of the cases, the presence of melanin pigment in the superficial corium or in the cytoplasm of macrophages was detected. None of the cases showed any features of dysplasia. Our results reveal that ARK is a benign lesion. However, the high prevalence of smokers amongst the patients might suggest that some potentially malignant disorders such as tobacco associated leukoplakia may clinically mimic ARK.

  2. Alveolar ridge augmentation by connective tissue grafting using a pouch method and modified connective tissue technique: A prospective study.

    Science.gov (United States)

    Agarwal, Ashish; Gupta, Narinder Dev

    2015-01-01

    Localized alveolar ridge defect may create physiological and pathological problems. Developments in surgical techniques have made it simpler to change the configuration of a ridge to create a more aesthetic and more easily cleansable shape. The purpose of this study was to compare the efficacy of alveolar ridge augmentation using a subepithelial connective tissue graft in pouch and modified connective tissue graft technique. In this randomized, double blind, parallel and prospective study, 40 non-smoker individuals with 40 class III alveolar ridge defects in maxillary anterior were randomly divided in two groups. Group I received modified connective tissue graft, while group II were treated with subepithelial connective tissue graft in pouch technique. The defect size was measured in its horizontal and vertical dimension by utilizing a periodontal probe in a stone cast at base line, after 3 months, and 6 months post surgically. Analysis of variance and Bonferroni post-hoc test were used for statistical analysis. A two-tailed P connective tissue graft proposed significantly more improvement as compare to connective tissue graft in pouch.

  3. The influence of resilient liner and clip attachments for bar-implant-retained mandibular overdentures on opposing maxillary ridge. A 5-year randomised clinical trial.

    Science.gov (United States)

    Elsyad, M A; Ashmawy, T M; Faramawy, A G

    2014-01-01

    This study aimed to compare the influence of resilient liner and clip attachments for bar-implant-retained mandibular overdentures on opposing maxillary ridge after 5 years of denture wearing. Thirty edentulous male patients (mean age 62·5 years) received two implants in the anterior mandible after being allocated into two equal groups using balanced randomisation. After 3 months, implants were connected with resilient bars. New maxillary complete dentures were then constructed, and mandibular overdentures were retained to the bars with either clips (group I, GI) or silicone resilient liners (group II, GII). The prosthetic and soft tissue complications of the maxillary dentures were recorded 6 months (T6 m ), 1 year (T1), 3 years (T3) and 5 years (T5) after overdenture insertion. Traced rotational tomograms were used for measurements of maxillary alveolar bone loss. The proportional value between bone areas and areas of reference not subject to resorption was expressed as a ratio (R). Change in R immediately before (T0) and after 5 years (T5) of overdenture insertion was calculated. Maxillary denture relining times and frequency of flabby anterior maxillary ridge occurred significantly more often in GI compared with GII. The change of R in anterior part of maxilla was significantly higher than change of R in posterior part in both groups. GI showed significant resorption of anterior residual ridge compared with GII. Relining times and frequencies of flabby ridge were significantly correlated with change in R. Within the limitations of this study, resilient liner attachments for bar-implant-retained mandibular overdentures are associated with decreased resorption and flabbiness of maxillary anterior residual ridge and fewer maxillary denture relining times when compared with clip attachments. © 2013 John Wiley & Sons Ltd.

  4. Three-Dimensional Volumetric Changes in Severely Resorbed Alveolar Sockets After Ridge Augmentation with Bovine-Derived Xenograft and Resorbable Barrier: A Preliminary Study on CBCT Imaging.

    Science.gov (United States)

    Manavella, Valeria; Romano, Federica; Corano, Lisa; Bignardi, Cristina; Aimetti, Mario

    The primary aim of the study was to describe a novel technique to evaluate volumetric hard tissue dimensional changes after ridge augmentation procedures. The secondary aim was to apply this newly developed measuring method to compromised alveolar sockets grafted with a slowly resorbing biomaterial covered with a collagen membrane. Eleven patients (6 men and 5 women, mean age 52.7 ± 8.3 years) requiring extraction of one hopeless tooth for severe periodontitis in the maxillary anterior area were consecutively treated with a ridge augmentation procedure. All experimental sockets showed advanced buccal bone plate deficiency and were grafted with deproteinized bovine bone mineral with 10% collagen covered with a collagen membrane. Sockets healed by secondary intention. Three-dimensional volumetric alveolar bone changes were calculated by superimposing cone beam computed tomography scans obtained before and 12 months after the augmentation procedure. After 12 months, the alveolar mineralized tissue filled 91.20% ± 7.96% of the maximum volume for regeneration. The augmentation procedure appeared not only to compensate for bone remodeling in most alveolar regions but also to repair a significant portion of the buccal wall. The most significant ridge width changes occurred 1 mm apical to the bone crest (2.33 ± 1.46 mm, P socket volume. A ridge preservation technique performed with collagenated bovine bone and a collagen membrane was able to improve ridge shape and dimensions in compromised alveolar sockets.

  5. Assessment of vascularity in irradiated and nonirradiated maxillary and mandibular minipig alveolar bone using laser doppler flowmetry.

    NARCIS (Netherlands)

    Verdonck, H.W.; Meijer, G.J.; Laurin, T.; Nieman, F.H.; Stoll, C.; Riediger, D.; Stoelinga, P.J.W.; Baat, C. de

    2007-01-01

    PURPOSE: The purpose of this animal study was to confirm that laser Doppler flowmetry (LDF) is a reproducible method for the assessment of maxillary and mandibular alveolar bone vascularity and that there is less vascularity in irradiated mandibular and maxillary bone compared to nonirradiated bone.

  6. Alveolar ridge augmentation by connective tissue grafting using a pouch method and modified connective tissue technique: A prospective study

    Directory of Open Access Journals (Sweden)

    Ashish Agarwal

    2015-01-01

    Full Text Available Background: Localized alveolar ridge defect may create physiological and pathological problems. Developments in surgical techniques have made it simpler to change the configuration of a ridge to create a more aesthetic and more easily cleansable shape. The purpose of this study was to compare the efficacy of alveolar ridge augmentation using a subepithelial connective tissue graft in pouch and modified connective tissue graft technique. Materials and Methods: In this randomized, double blind, parallel and prospective study, 40 non-smoker individuals with 40 class III alveolar ridge defects in maxillary anterior were randomly divided in two groups. Group I received modified connective tissue graft, while group II were treated with subepithelial connective tissue graft in pouch technique. The defect size was measured in its horizontal and vertical dimension by utilizing a periodontal probe in a stone cast at base line, after 3 months, and 6 months post surgically. Analysis of variance and Bonferroni post-hoc test were used for statistical analysis. A two-tailed P < 0.05 was considered to be statistically significant. Results: Mean values in horizontal width after 6 months were 4.70 ± 0.87 mm, and 4.05 ± 0.89 mm for group I and II, respectively. Regarding vertical heights, obtained mean values were 4.75 ± 0.97 mm and 3.70 ± 0.92 mm for group I and group II, respectively. Conclusion: Within the limitations of this study, connective tissue graft proposed significantly more improvement as compare to connective tissue graft in pouch.

  7. Maxillary anterior ridge augmentation with recombinant human bone morphogenetic protein 2.

    Science.gov (United States)

    Edmunds, Ryan K; Mealey, Brian L; Mills, Michael P; Thoma, Daniel S; Schoolfield, John; Cochran, David L; Mellonig, Jim

    2014-01-01

    No human studies exist on the use of recombinant human bone morphogenetic protein 2 (rhBMP-2) on an absorbable collagen sponge (ACS) as a sole graft material for lateral ridge augmentation in large ridge defect sites. This series evaluates the treatment outcome of maxillary anterior lateral ridge augmentation with rhBMP-2/ACS. Twenty patients were treated with rhBMP-2/ACS and fixation screws for space maintenance. Cone beam volumetric tomography measurements were used to determine gain in ridge width, and a bone core biopsy was obtained. The mean horizontal ridge gain was 1.2 mm across sites, and every site gained width.

  8. Analysis of the root position of the maxillary incisors in the alveolar bone using cone-beam computed tomography

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Yun Hoa; Cho, Bong Hee [Dept. of Oral and Maxillofacial Radiology, School of Dentistry, Pusan National University, Yangsan (Korea, Republic of); Hwang, Jae Jun [Dept. of Oral and Maxillofacial Radiology, Yonsei University College of Dentistry, Seoul (Korea, Republic of)

    2017-09-15

    The purpose of this study was to measure the buccal bone thickness and angulation of the maxillary incisors and to analyze the correlation between these parameters and the root position in the alveolar bone using cone-beam computed tomography (CBCT). CBCT images of 398 maxillary central and lateral incisors from 199 patients were retrospectively reviewed. The root position in the alveolar bone was classified as buccal, middle, or palatal, and the buccal type was further classified into subtypes I, II, and III. In addition, the buccolingual inclination of the tooth and buccal bone thickness were evaluated. A majority of the maxillary incisors were positioned more buccally within the alveolar bone, and only 2 lateral incisors (0.5%) were positioned more palatally. The angulation of buccal subtype III was the greatest and that of the middle type was the lowest. Most of the maxillary incisors exhibited a thin facial bone wall, and the lateral incisors had a significantly thinner buccal bone than the central incisors. The buccal bone of buccal subtypes II and III was significantly thinner than that of buccal subtype I. A majority of the maxillary incisor roots were positioned close to the buccal cortical plate and had a thin buccal bone wall. Significant relationships were observed between the root position in the alveolar bone, the angulation of the tooth in the alveolar bone, and buccal bone thickness. CBCT analyses of the buccal bone and sagittal root position are recommended for the selection of the appropriate treatment approach.

  9. Cone-beam computed tomography evaluation of dental, skeletal, and alveolar bone changes associated with bonded rapid maxillary expansion

    Directory of Open Access Journals (Sweden)

    Namrata Dogra

    2016-01-01

    Full Text Available Aims and Objectives: To evaluate skeletal changes in maxilla and its surrounding structures, changes in the maxillary dentition and maxillary alveolar bone changes produced by bonded rapid maxillary expansion (RME using cone-beam computed tomography (CBCT. Materials and Methods: The sample consisted of 10 patients (6 males and 4 females with age range 12 to 15 years treated with bonded RME. CBCT scans were performed at T1 (pretreatment and at T2 (immediately after expansion to evaluate the dental, skeletal, and alveolar bone changes. Results: RME treatment increased the overall skeletal parameters such as interorbital, zygomatic, nasal, and maxillary widths. Significant increases in buccal maxillary width was observed at first premolar, second premolar, and first molar level. There was a significant increase in arch width both on the palatal side and on the buccal side. Significant tipping of right and left maxillary first molars was seen. There were significant reductions in buccal bone plate thickness and increase in palatal bone plate thickness. Conclusions: Total expansion achieved with RME was a combination of dental, skeletal and alveolar bone changes. At the first molar level, 28.45% orthopedic, 16.03% alveolar bone bending, and 55.5% orthodontic changes were observed.

  10. The effect of therapeutic radiation on canine alveolar ridges augmented with hydroxylapatite

    DEFF Research Database (Denmark)

    Pinholt, E M; Kwon, P H

    1992-01-01

    The purpose of this investigation was to evaluate the effect of radiation on hydroxylapatite (HA) implanted subperiosteally for alveolar ridge augmentation in dogs. All bicuspids and molars were extracted from 16 dogs. After 6 weeks, nonporous HA granules were implanted subperiosteally...... on the alveolar ridge. Following 4 months of healing, 12 dogs (experimental group) underwent therapeutic radiation therapy (Co60, 4,000 rad [40 Gy]) to the head and neck region. Four dogs were not irradiated and served as controls. Four animals (three experimental and one control) were killed at 5,6,7, and 8...

  11. Clinical and Histomorphometric Assessment of Lateral Alveolar Ridge Augmentation Using a Corticocancellous Freeze-Dried Allograft Bone Block.

    Science.gov (United States)

    Ahmadi, Roya Shariatmadar; Sayar, Ferena; Rakhshan, Vahid; Iranpour, Babak; Jahanbani, Jahanfar; Toumaj, Ahmad; Akhoondi, Nasrin

    2017-06-01

    Horizontal ridge augmentation with allografts has attracted notable attention because of its proper success rate and the lack of disadvantages of autografts. Corticocancellous block allografts have not been adequately studied in humans. Therefore, this study clinically and histomorphometrically evaluated the increase in ridge width after horizontal ridge augmentation using corticocancellous block allografts as well as implant success after 12 to 18 months after implantation. In 10 patients receiving implants (3 women, 7 men; mean age = 45 years), defective maxillary alveolar ridges were horizontally augmented using freeze-dried bone allograft blocks. Ridge widths were measured before augmentation, immediately after augmentation, and ∼6 months later in the reentry surgery for implantation. This was done at points 2 mm (A) and 5 mm (B) apically to the crest. Biopsy cores were acquired from the implantation site. Implant success was assessed 15.1 ± 2.7 months after implantation (range = 12-18 months). Data were analyzed using Friedman and Dunn tests (α = 0.05). At point A, ridge widths were 2.77 ± 0.37, 8.02 ± 0.87, and 6.40 ± 0.66 mm, respectively, before surgery, immediately after surgery, and before implantation. At point B, ridge widths were 3.40 ± 0.39, 9.35 ± 1.16, and 7.40 ± 1.10 mm, respectively, before surgery, immediately after surgery, and before implantation. The Friedman test showed significant increases in ridge widths, both at point A and point B (both P = .0000). Postaugmentation resorption was about 1.5-2 mm and was statistically significant at points A and B (P < .05, Dunn). The percentage of newly formed bone, residual graft material, and soft tissue were 33.0% ± 11.35% (95% confidence interval [CI] = 24.88%-41.12%), 37.50% ± 19.04% (95% CI = 23.88%-51.12%), and 29.5%, respectively. The inflammation was limited to grades 1 or zero. Twelve to 18 months after implantation, no implants caused pain or showed exudates or pockets. Radiographic

  12. Lost salt technique for severely resorbed alveolar ridges: An innovative approach

    Directory of Open Access Journals (Sweden)

    Himanshi Aggarwal

    2012-01-01

    Full Text Available The success of a complete denture relies on the principles of retention, stability and support. The prosthodontist skill lies in applying these principles efficiently in critical situations. Severely resorbed maxillary edentulous ridges that are narrow and constricted with increased inter ridge space provide decreased support, retention and stability. The consequent weight of the processed denture only compromises them further. This article describes a case report of an edentulous patient with resorbed ridges where a simplified technique of fabricating a hollow maxillary complete denture using lost salt technique was used for preservation of denture bearing areas. The hollowing of the denture reduces the weight of the denture, thereby enhancing stability and retention, reducing the further resorption of the jaws.

  13. Chemical, physical, and histologic studies on four commercial apatites used for alveolar ridge augmentation

    DEFF Research Database (Denmark)

    Pinholt, E M; Ruyter, I E; Haanaes, H R

    1992-01-01

    The purpose of this study was to evaluate four commercial apatite products. Subperiosteal alveolar ridge augmentation was performed on the maxilla of rats by implantation of granules of two dense products and of two porous products, and the tissue response was compared with the material character...

  14. Titanium implant insertion into dog alveolar ridges augmented by allogenic material

    DEFF Research Database (Denmark)

    Pinholt, E M; Haanaes, H R; Donath, K

    1994-01-01

    The purpose of this investigation was to evaluate whether titanium endosseous implants would osseointegrate in dog alveolar ridges augmented by allogenic material. In 8 dogs en bloc resection, including 2 pre-molars, was performed bilaterally in the maxilla and the mandible. After a healing period...

  15. Effects of Hydroxyapatite on Bone Graft Resorption in an Experimental Model of Maxillary Alveolar Arch Defects

    Directory of Open Access Journals (Sweden)

    Ozgur Pilanci

    2013-06-01

    Full Text Available Most commonly used treatments use autologous bone grafts to address bony defects in patients with cleft palate. Major disadvantages of autogenous bone grafts include donor site morbidity and resorption. Suggestions to overcome such problems include biomaterials that can be used alone or in combination with bone. We examined the effect of hydroxyapatite cement on bone graft resorption in a rabbit maxillary alveolar defect model. We divided 16 young adult albino New Zealand rabbits into two groups. A defect 1 cm wide was created in each rabbit's maxillary arch. In Group 1, the removed bone was disrupted, and the pieces were replaced in the defect. In the other group, the pieces were replaced after mixing (1:1 with hydroxyapatite cement. Quantitative computed tomographic evaluation of these grafts was performed in axial and coronal planes for each rabbit at 2 and 12 weeks. In axial images at 12 weeks, the group without cement showed mean bone resorption of 15%. In the cement group, a mean volumetric increase of 68% was seen. No resorption occurred when bone grafts were mixed with hydroxyapatite cement. [Arch Clin Exp Surg 2013; 2(3.000: 170-175

  16. Regenerative Needs Following Alveolar Ridge Preservation Procedures in Compromised and Noncompromised Extraction Sockets: A Cone Beam Computed Tomography Study.

    Science.gov (United States)

    Koutouzis, Theofilos; Lipton, David

    2016-01-01

    The aim of this study was to evaluate the necessity for additional regenerative procedures following healing of compromised and noncompromised extraction sockets with alveolar ridge preservation procedures through the use of virtual implant imaging software. The cohort was comprised of 87 consecutive patients subjected to a single maxillary tooth extraction with an alveolar ridge preservation procedure for subsequent implant placement. Patients were divided into two main groups based on the integrity of the buccal bone plate following teeth extraction. Patients in the compromised socket (CS) group (n = 52) had partial or complete buccal bone plate loss, and patients in the noncompromised socket (NCS) group (n = 35) exhibited no bone loss of their socket walls following tooth extraction. Following 4 to 6 months of healing, all patients had a cone beam computed tomography (CBCT) study. Root-formed implants were placed virtually in an ideal prosthetic position. The number of implants per group and location (anterior, premolar, molar) exhibiting exposed buccal implant surface was calculated. In the CS group, 5 out of 19 anterior implants (26.3%), 4 out of 14 premolar implants (28.5%), and 7 out of 19 molar implants (36.8%) had exposed buccal surfaces. In the NCS group, 4 out of 9 anterior implants (44.4%), 2 out of 9 premolar implants (22.2%), and 4 out of 17 molar implants (23.5%) had exposed buccal surfaces. There were no statistically significant differences for intragroup and intergroup comparisons (χ² test, P > .05). This study failed to find statistically significant differences in the frequency of implants with exposed buccal surfaces placed virtually, following treatment of compromised and noncompromised sockets. A high proportion (22% to 44%) of sites had implants that potentially needed additional regenerative procedures.

  17. A Semi-automatic Algorithm for Preliminary Assessment of Labial Gingiva and Alveolar Bone Thickness of Maxillary Anterior Teeth.

    Science.gov (United States)

    Chen, Sheng-Hong; Chan, Hsun-Liang; Lu, Yongning; Ong, Sim-Heng; Wang, Hom-Lay; Ko, Eng Hong; Chang, Po-Chun

    Soft and hard tissue volumes are critical for implant placement and long-term stability. Although the literature has adequately addressed tissue biotypes of Western populations, pertinent information about Asian populations is limited. This study aimed to evaluate the soft and hard tissue profiles of the maxillary anterior teeth of the Taiwanese population using a semi-automatic algorithm. Cone beam computed tomography images of 11 adults with well-aligned maxillary anterior teeth were overlaid with those of cast models, based on the tooth crowns manually outlined by two independent observers. Each tooth was digitally trisected mesiodistally and apicocoronally. The thicknesses of the labial gingiva and alveolar bone were measured using a customized software program. No obvious difference between the observers was noted regarding the dimension of tooth crowns. The average thicknesses of the labial gingiva, the labial alveolar bone, and the palatal alveolar bone were 1.76 ± 0.11 mm, 1.02 ± 0.12 mm, and 1.80 ± 0.31 mm, respectively, with no significant differences between teeth. All parameters were thicker in the apical region than in the cervical region, and the alveolar bone was thinner in the midlabial region of incisors than in the interproximal regions. The thinnest areas were the midcervical compartment of the right central incisor (0.53 ± 0.33 mm) for the labial gingiva, the midcervical compartment of the right lateral incisor (0.23 ± 0.10 mm) for the labial alveolar bone, and the mesiocervical compartment of the left central incisor (0.33 ± 0.09 mm) for the palatal alveolar bone. This study presents an objective and comprehensive methodology for evaluating the soft and hard tissue profiles of maxillary anterior teeth and may be of value for presurgical planning for immediate implant placement. The results suggest that profiles of the Taiwanese subjects are similar to profiles of Western populations.

  18. Horizontal alveolar ridge expansion followed by immediate placement of implants and rehabilitation with zirconia prosthesis

    Directory of Open Access Journals (Sweden)

    Tatiana Miranda Deliberador

    2017-01-01

    Full Text Available In recent years, there have been a growing number of procedures involving dental implants. Most cases, though, are characterized by bone atrophy, especially horizontal atrophy. This clinical case aims to report a technique for the expansion of the horizontal alveolar ridge. A longitudinal fracture was created in the alveolar ridge to expand the bone, followed by immediate insertion of dental implants along with a particulate allogeneic bone graft. Eight implants were placed in the maxilla, and after 12 months, a surgical reopening was performed, along with rehabilitation with a protocol-type prosthesis, for which a zirconia infrastructure was made. The patient was observed during a 10-month follow-up period in which an effective osseointegration of all implants was achieved as a result of such a technique. The split-crest technique followed by the immediate placement of implants and a particulate allogeneic bone graft proved to be effective, with a predictable osseointegration.

  19. Alveolar ridge expansion-assisted orthodontic space closure in the mandibular posterior region.

    Science.gov (United States)

    Ozer, Mete; Akdeniz, Berat Serdar; Sumer, Mahmut

    2013-12-01

    Orthodontic closure of old, edentulous spaces in the mandibular posterior region is a major challenge. In this report, we describe a method of orthodontic closure of edentulous spaces in the mandibular posterior region accelerated by piezoelectric decortication and alveolar ridge expansion. Combined piezosurgical and orthodontic treatments were used to close 14- and 15-mm-wide spaces in the mandibular left and right posterior areas, respectively, of a female patient, aged 18 years and 9 months, diagnosed with skeletal Class III malocclusion, hypodontia, and polydiastemas. After the piezoelectric decortication, segmental and full-arch mechanics were applied in the orthodontic phase. Despite some extent of root resorption and anchorage loss, the edentulous spaces were closed, and adequate function and esthetics were regained without further restorative treatment. Alveolar ridge expansion-assisted orthodontic space closure seems to be an effective and relatively less-invasive treatment alternative for edentulous spaces in the mandibular posterior region.

  20. Alveolar ridge augmentation in rats by combined hydroxylapatite and osteoinductive material

    DEFF Research Database (Denmark)

    Pinholt, E M; Bang, G; Haanaes, H R

    1991-01-01

    , lyophilized dentin or bone and implanted subperiosteally for alveolar ridge augmentation purposes and heterotopically in the abdominal muscles in rats. Light microscopic evaluation revealed that HA was surrounded by fibrous connective tissue containing foreign body giant cells and it had neither...... an osteoinductive nor an osteoconductive effect. The newly formed bone induced from the implanted allogenic, demineralized, lyophilized dentin or bone was never found in close contact with the HA and did not incorporate the implant....

  1. Anterior and middle superior alveolar nerve block for anesthesia of maxillary teeth using conventional syringe

    Directory of Open Access Journals (Sweden)

    Ignacio Velasco

    2012-01-01

    Full Text Available Background: Dental procedures in the maxilla typically require multiple injections and may inadvertently anesthetize facial structures and affect the smile line. To minimize these inconveniences and reduce the number of total injections, a relatively new injection technique has been proposed for maxillary procedures, the anterior and middle superior alveolar (AMSA nerve block, which achieves pulpal anesthesia from the central incisor to second premolar through palatal approach with a single injection. The purpose of this article is to provide background information on the anterior and middle superior alveolar nerve block and demonstrate its success rates of pulpal anesthesia using the conventional syringe. Materials and Methods: Thirty Caucasian patients (16 men and 14 women with an average age of 22 years-old, belonging to the School of Dentistry of Los Andes University, were selected. All the patients received an AMSA nerve block on one side of the maxilla using the conventional syringe, 1 ml of lidocaine 2% with epinephrine 1:100.000 was injected to all the patients. Results: The AMSA nerve block obtained a 66% anesthetic success in the second premolar, 40% in the first premolar, 60% in the canine, 23.3% in the lateral incisor, and 16.7% in the central incisor. Conclusions: Because of the unpredictable anesthetic success of the experimental teeth and variable anesthesia duration, the technique is disadvantageous for clinical application as the first choice, counting with other techniques that have greater efficacy in the maxilla. Although, anesthetizing the teeth without numbing the facial muscles may be useful in restorative dentistry.

  2. Segmental Maxillary Distraction Osteogenesis With a Hybrid-Type Distractor in the Management of Wide Alveolar Cleft.

    Science.gov (United States)

    Zhang, Jianfei; Zhang, Wenbin; Shen, Steve Guofang

    2018-01-01

    To investigate segmental maxillary distraction osteogenesis (DO) with hybrid-type distractor in the management of wide alveolar cleft. Six patients underwent segmental DO with a hybrid-type distractor. After the success of DO and 3-month consolidation period, removal of the distractor was accompanied by alveolar bone graft with iliac bone. Panoramic radiograph and computed tomography scanning were taken preoperatively (T0) and the day after distractor removal (T1). The crest distance between the long axis of cleft nearby teeth was measured. All patients completed the DO period, and the succeeding alveolar bone graft healing was uneventful. The mean cleft distance decrease was 12.05 mm (range: 10.1-13.5 mm). As for the mobility degree record of abutment tooth in the transport segment recorded, 6 patients were grading I° at T0, while 5 patients were grading I° and 1 patient was grading II° at T1. Segmental maxillary DO with the hybrid-type distractor is successful to reduce the cleft width in these cases, and it is promising in the treatment of wide dental alveolar cleft, especially for the adult patient.

  3. PDGF-metronidazole-encapsulated nanofibrous functional layers on collagen membrane promote alveolar ridge regeneration

    Directory of Open Access Journals (Sweden)

    Ho MH

    2017-08-01

    Full Text Available Ming-Hua Ho,1 Hao-Chieh Chang,2,3 Yu-Chia Chang,3 Jeiannete Claudia,1 Tzu-Chiao Lin,2 Po-Chun Chang2,3 1Department of Chemical Engineering, College of Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan; 2Graduate Institute of Clinical Dentistry, School of Dentistry, National Taiwan University, Taipei, Taiwan; 3Department of Dentistry, National Taiwan University Hospital, Taipei, Taiwan Abstract: This study aimed to develop a functionally graded membrane (FGM to prevent infection and promote tissue regeneration. Poly(L-lactide-co-D,L-lactide encapsulating platelet-derived growth factor (PDLLA-PDGF or metronidazole (PDLLA-MTZ was electrospun to form a nanofibrous layer on the inner or outer surface of a clinically available collagen membrane, respectively. The membrane was characterized for the morphology, molecule release profile, in vitro and in vivo biocompatibility, and preclinical efficiency for alveolar ridge regeneration. The PDLLA-MTZ and PDLLA-PDGF nanofibers were 800–900 nm in diameter, and the thicknesses of the functional layers were 20–30 µm, with sustained molecule release over 28 days. All of the membranes tested were compatible with cell survival in vitro and showed good tissue integration with minimal fibrous capsule formation or inflammation. Cell proliferation was especially prominent on the PDLLA-PDGF layer in vivo. On the alveolar ridge, all FGMs reduced wound dehiscence compared with the control collagen membrane, and the FGM with PDLLA-PDGF promoted osteogenesis significantly. In conclusion, the FGMs with PDLLA-PDGF and PDLLA-MTZ showed high biocompatibility and facilitated wound healing compared with conventional membrane, and the FGM with PDLLA-PDGF enhanced alveolar ridge regeneration in vivo. The design represents a beneficial modification, which may be easily adapted for future clinical use. Keywords: tissue engineering, platelet-derived growth factor, metronidazole, alveolar process

  4. Brief communication: Population variation in human maxillary premolar accessory ridges (MxPAR).

    Science.gov (United States)

    Burnett, Scott E; Hawkey, Diane E; Turner, Christy G

    2010-02-01

    The purpose of this brief communication is to report the results of an analysis of maxillary premolar accessory ridges (MxPAR), a common but understudied accessory ridge that may occur both mesial and distal to the central ridge of the buccal cusp of upper premolars. We developed a new five-grade scoring plaque to better categorize MxPAR variation. Subsequently, we conducted a population analysis of MxPAR frequency in 749 dental casts of South African Indian, American Chinese, Alaskan Eskimo, Tohono O'odham (Papago), Akimel O'odham (Pima), Solomon Islander, South African Bantu, and both American and South African Whites. Northeast Asian and Asian-derived populations exhibited the highest MxPAR frequencies while Indo-European samples (South African Indians, American and South African Whites) exhibited relatively low frequencies. The Solomon Islanders and South African Bantu samples exhibited intermediate frequencies. Our analysis indicates that statistically significant differences in MxPAR frequency exist between major geographic populations. As a result, the MxPAR plaque has now been added to the Arizona State University Dental Anthropology System, an important contribution as maxillary premolar traits are underrepresented in analyses of dental morphology. 2009 Wiley-Liss, Inc.

  5. Titanium and polyether ether ketone (PEEK) patient-specific sub-periosteal implants: two novel approaches for rehabilitation of the severely atrophic anterior maxillary ridge.

    Science.gov (United States)

    Mounir, M; Atef, M; Abou-Elfetouh, A; Hakam, M M

    2018-05-01

    The aim of this study was to assess two new protocols for single-stage rehabilitation of the severely atrophic maxillary ridge using customized porous titanium or polyether ether ketone (PEEK) sub-periosteal implants. Ten patients with a severely atrophic anterior maxillary alveolar ridge were divided randomly into two groups (five patients in each) to receive customized sub-periosteal implants fabricated via CAD/CAM technology: group 1, porous titanium implants; group 2, PEEK implants. Prosthetic loading with fixed acrylic bridges was performed 1 month postoperative. The implants were followed-up for 12 months and evaluated for the presence of any sign of radiographic bone resorption, mobility, infection, prosthetic fracture, or implant exposure. The immediate postoperative period was uneventful except for one case complicated by wound dehiscence in group 1. At 12 months, all implants were functionally stable and the patients were comfortable with the prostheses. No signs of radiographic bone resorption, mobility, infection, or prosthetic fracture were observed. Within the limitations of this study, the application of customized porous titanium and PEEK sub-periosteal implants produced through CAD/CAM technology appears to be an acceptable method for single-stage prosthetic rehabilitation of the severely atrophic edentulous anterior maxilla. This study was awarded the best case study at the academy of osseintegration annual meeting 2017, Orlando, Florida. Copyright © 2017 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  6. Orthodontic tooth movement after extraction of previously autotransplanted maxillary canines and ridge augmentation.

    Science.gov (United States)

    Collett, A R; Fletcher, B

    2000-12-01

    A case report is detailed in which autotransplanted maxillary canines were removed and the spaces closed. Substantial surrounding bone loss was associated with the upper right canine, and a bone graft was needed to reestablish normal dentoalveolar ridge morphology. Bone was taken from the maxillary tuberosity and placed in the canine extraction site, fixed with a bone screw, and covered with GoreTex. Seven months after placement of the bone graft, the GoreTex and stabilizing screw were removed to allow for consolidation of the bone. The upper left canine and lower second premolars were extracted, and fixed appliances were placed in both arches to align the teeth and close the spaces. Protraction of the upper right first premolar and retraction of the lateral incisor into the graft site were kept slow and constant with continued periodontal assessment. During the space closure, there was some concern that the bone in the graft site might resorb, leaving the teeth with compromised periodontal support. However, no significant periodontal attachment loss occurred despite ongoing concern about the amount of keratinized tissue. Perhaps the relatively slow rate of tooth movement provided for bone to be maintained and recreated ahead of the tooth. Almost complete closure of the upper canine extraction spaces was achieved. The upper premolars were substituted for the maxillary canines, and unfavorable prosthetic options were thus avoided. The lower arch was aligned, and the extraction spaces completely closed.

  7. Alveolar Ridge Augmentation with Three-Dimensional Printed Hydroxyapatite Devices: A Preclinical Study.

    Science.gov (United States)

    Fiorellini, Joseph P; Norton, Michael R; Luan, Kevin WanXin; Kim, David Minjoon; Wada, Kei; Sarmiento, Hector L

    2018-02-14

    The objective of this study was to evaluate the effectiveness of precise three-dimensional hydroxyapatite printed micro- and macrochannel devices for alveolar ridge augmentation in a canine model. All grafts induced minimal inflammatory and fibrotic reactions. Examination of undecalcified sections revealed that both types of grafts demonstrated bone ingrowth. The majority of the bone growth into the block graft was into the channels, though a portion grew directly into the construct in the form of small bony spicules. In conclusion, bone ingrowth was readily demonstrated in the middle of the implanted printed devices.

  8. Aumento del reborde alveolar residual mediante técnica de rollo Increase of residual alveolar ridge using roll technique

    Directory of Open Access Journals (Sweden)

    Miguel Ángel Simancas Pallares

    2011-03-01

    Full Text Available La pérdida dentaria, asociada a factores sistémicos, patológicos y traumáticos, promueve el proceso de reabsorción ósea de los rebordes residuales y genera problemas funcionales, como la falta de estabilidad y retención de las prótesis dentarias removibles, y disturbios estéticos y psicológicos. Estos defectos varían en dependencia de la cantidad de pérdida ósea y de tejidos blandos que hayan alcanzado. En la actualidad son descritas diversas técnicas que permiten corregir estos defectos. Una de ellas es la técnica del rollo, la cual demuestra muy buenos resultados al aumentar el tamaño del reborde alveolar y disminuir los defectos estéticos que causa sobre todo en el sector anterior. El objetivo del presente artículo es describir el caso clínico de un paciente con pérdida ósea en el sector anterior, tipo III según Seibert, rehabilitado con prótesis parcial fija y sometido a un procedimiento quirúrgico con la técnica del rollo. Se alcanzaron los objetivos planteados y proporciona una mejoría estética así como una mejora en su calidad de vida. Se demostró que con esta técnica se obtienen resultados predecibles que devuelven la estética en zonas de alta exigencia por parte de los pacientes.Tooth loss associated with systemic factors, pathological and traumatic conditions, promotes the bone resorption of residual ridges, this, creates functional problems such as lack of stability and retention of removable dentures as well as aesthetic and psychological disturbances. These defects vary depending on the amount of bone loss and soft tissue they reach. At present there are described various techniques that can correct these defects. One of these is the roll technique which shows very good results by increasing the size of the alveolar ridge and decrease aesthetic defects in the anterior area of the maxilla. The aim of this article is to describe a case of a patient with Seibert bone loss type III, rehabilitated with

  9. Distracción osteogénica alveolar como método de aumento del reborde alveolar Alveolar osteogenic distraction as method to increase the alveolar ridge

    Directory of Open Access Journals (Sweden)

    Denia Morales Navarro

    2011-03-01

    , disadvantages and complications. A bibliographic review was made by database search of reference systems as MEDLINE and PubliMed using the descriptors "alveolar distraction" o "osteogenic distraction". The published bibliographic sources mainly over 5 years concluding that this technique is an excellent alternative for the bone and soft tissues formation in zones of alveolar atrophy including three stages: latency, distraction and consolidation; being a foreseeable method and with low rates of bone reabsorption compared to other techniques of increase of alveolar ridge. It has its main indication in implant therapy to provide bone volume. We must to individualize each case and to use the more appropriate method according the clinical and personal features of patient. A proper case selection and a better understand of technique are essential to achieve successful results by alveolar osteogenic distraction. In Cuba the alveolar distraction has been not much applied being necessary to expand the studies on this subject matter.

  10. A radiographic study on the prevalence of knife-edge residual alveolar ridge at proposed dental implant sites

    International Nuclear Information System (INIS)

    AlFaleh, Wafaa

    2009-01-01

    Dental implants are widely used in restoration of completely or partially edentulous dental arches. Before placement of endosseous implants in the jaws, both the quantity and quality of the residual ridge must be assessed radiographically. Remodeling activity after tooth extraction is localized primarily at the crestal area of the residual ridges, resulting in reduction of the height of bone and creation of various three-dimensional shapes of the residual ridges. When bone resorption at the lingual and buccal aspects is greater than that at the crestal area, a knife-edge type of residual ridge develops. The aim of this study was to evaluate the prevalence of the knife-edge morphology of the residual alveolar bone at proposed implant sites in partially or completely edentulous patients. Computed tomography (CT) cross-sectional images of the upper and lower jaws were assessed at the proposed sites before implant placement. Images of 258 proposed implant sites belonging to 30 patients were assessed radiographically. In 120 proposed implant sites out of 258 (46.5%), the residual alveolar ridge had a knife-edge configuration, the majority belonging to completely edentulous patients who lost their teeth more than ten years previously. High prevalence of knife-edge ridge was found, therefore, replacement of missing teeth by immediate implant is recommended to prevent atrophy or knife-edge morphology of the residual ridge. (author)

  11. Simultaneous maxillary distraction osteogenesis using a twin-track distraction device combined with alveolar bone grafting in cleft patients: preliminary report of a technique.

    Science.gov (United States)

    Suzuki, Eduardo Yugo; Watanabe, Masayo; Buranastidporn, Boonsiva; Baba, Yoshiyuki; Ohyama, Kimie; Ishii, Masatoshi

    2006-01-01

    The simultaneous use of cleft reduction and maxillary advancement by distraction osteogenesis has not been applied routinely because of the difficulty in three-dimensional control and stabilization of the transported segments. This report describes a new approach of simultaneous bilateral alveolar cleft reduction and maxillary advancement by distraction osteogenesis combined with autogenous bone grafting. A custom-made Twin-Track device was used to allow bilateral alveolar cleft closure combined with simultaneous maxillary advancement, using distraction osteogenesis and a rigid external distraction system in a bilateral cleft lip and palate patient. After a maxillary Le Fort I osteotomy, autogenous iliac bone graft was placed in the cleft spaces before suturing. A latency period of six days was observed before activation. The rate of activation was one mm/d for the maxillary advancement and 0.5 mm/d for the segmental transport. Accordingly, the concave facial appearance was improved with acceptable occlusion, and complete bilateral cleft closure was attained. No adjustments were necessary to the vector of the transported segments during the activation and no complications were observed. The proposed Twin-Track device, based on the concept of track-guided bone transport, permitted three-dimensional control over the distraction processes allowing simultaneous cleft closure, maxillary distraction, and autogenous bone grafting. The combined simultaneous approach is extremely advantageous in correcting severe deformities, reducing the number of surgical interventions and, consequently, the total treatment time.

  12. Alveolar ridge preservation using autogenous tooth graft versus beta-tricalcium phosphate alloplast: A randomized, controlled, prospective, clinical pilot study

    Directory of Open Access Journals (Sweden)

    Chaitanya Pradeep Joshi

    2016-01-01

    Full Text Available Background: A randomized, prospective clinical, radiographical, and histological study was conducted to evaluate healing after alveolar ridge preservation technique using two different graft materials, namely, a novel autogenous graft material i. e., autogenous tooth graft (ATG and beta-tricalcium phosphate (β-TCP alloplast. Materials and Methods: Fifteen patients undergoing extraction of at least three teeth were selected. Atraumatic extractions were performed. Of the three extraction sockets, one was grafted with ATG, other with β-TCP, and the third was left ungrafted. Cone-beam computed tomography scans were taken immediately after grafting and 4 months postoperatively to check the changes in alveolar crest height and width at all the sites. Three patients in whom implant placement was done after complete healing; bone samples were harvested using a 3 mm diameter trephine during osteotomy preparation from both the ridge preserved sites and studied histologically. Results: There was a statistically significant difference when the changes in width and height of alveolar crest were compared within all the three groups (P < 0.05. Among three sites, ATG-grafted sites showed the most superior results with a minimal reduction in alveolar crest height and width. Histological analysis also showed the same trend with more new bone formation at ATG-grafted sites as compared to β-TCP-grafted sites. Conclusion: Postextraction, ridge preservation leads to more predictable maintenance of alveolar ridge height and width. ATG as compared to β-TCP provided superior results. Based on this, we conclude that ATG material can serve as a better alternative to conventional bone graft materials.

  13. Hard and soft tissue changes following alveolar ridge preservation: a systematic review.

    Science.gov (United States)

    MacBeth, Neil; Trullenque-Eriksson, Anna; Donos, Nikolaos; Mardas, Nikos

    2017-08-01

    Two focused questions were addressed within this systematic review. Q1) What is the effect of alveolar ridge preservation on linear and volumetric alveolar site dimensions, keratinised measurements, histological characteristics and patient-based outcomes when compared to unassisted socket healing. Q2) What is the size effect of these outcomes in three different types of intervention (guided bone regeneration, socket grafting and socket seal). An electronic search (MEDLINE, EMBASE, Cochrane Central Register LILACS, Web of Science) and hand-search was conducted up to June 2015. Randomised controlled trials (RCT) and controlled clinical trials (CCT); with unassisted socket healing as controls: were eligible in the analysis for Q1. RCTs, CCTs and large prospective case series with or without an unassisted socket healing as control group were eligible in the analysis for Q2. Nine papers (8 RCTs and 1 CCTs) were included in the analysis for Q1 and 37 papers (29 RCTs, 7 CCTs and 1 case series) for Q2. The risk for bias was unclear or high in most of the studies. Q1: the standardised mean difference (SMD) in vertical mid-buccal bone height between ARP and a non-treated site was 0.739 mm (95% CI: 0.332 to 1.147). The SMD when proximal vertical bone height and horizontal bone width was compared was 0.796mm (95% CI: -1.228 to 0.364) and 1.198 mm (95% CI: -0.0374 to 2.433). Examination of ARP sites revealed significant variation in vital and trabecular bone percentages and keratinised tissue width and thickness. Adverse events were routinely reported, with three papers reporting a high level of complications in the test and control groups and two papers reporting greater risks associated with ARP. No studies reported on variables associated with the patient experience in either the test or the control group. Q2: A pooled effect reduction (PER) in mid-buccal alveolar ridge height of -0.467 mm (95% CI: -0.866 to -0.069) was recorded for GBR procedures and -0.157 mm (95% CI

  14. Comparison of the changes of alveolar bone thickness in maxillary incisor area in extraction and non-extraction cases: computerized tomography evaluation

    Directory of Open Access Journals (Sweden)

    Paulo Roberto Barroso Picanço

    2013-10-01

    Full Text Available OBJECTIVE: To compare, through computed tomography, alveolar bone thickness changes at the maxillary incisors area during orthodontic treatment with and without tooth extraction. METHODS: Twelve patients were evaluated. They were divided into 2 groups: G1 - 6 patients treated with extraction of right and left maxillary first premolars, with mean initial age of 15.83 years and mean treatment length of 2.53 years; G2 - 6 patients treated without extraction, with mean initial age of 18.26 years and mean treatment length of 2.39 years. Computed tomographies, lateral cephalograms and periapical radiographs were used at the beginning of the treatment (T1 and 18 months after the treatment had started (T2. Extraction space closure occurred in the extraction cases. Intragroup and intergroup comparisons were performed by dependent and independent t test, respectively. RESULTS: In G1, the central incisor was retracted and uprighted, while in G2 this tooth showed vestibularization. Additionally, G1 presented a higher increase of labial alveolar bone thickness at the cervical third in comparison with G2. The incidence of root resorption did not present significant differences between groups. CONCLUSION: There were no changes in alveolar bone thickness when extraction and nonextraction cases were compared, except for the labial alveolar bone thickness at the cervical third of maxillary incisors.

  15. Hard and Soft Tissue Management of a Localized Alveolar Ridge Atrophy with Autogenous Sources and Biomaterials: A Challenging Clinical Case

    OpenAIRE

    C. Maiorana; D. Andreoni; P. P. Poli

    2016-01-01

    Particularly in the premaxillary area, the stability of hard and soft tissues plays a pivotal role in the success of the rehabilitation from both a functional and aesthetic aspect. The present case report describes the clinical management of a localized alveolar ridge atrophy in the area of the upper right canine associated with a thin gingival biotype with a lack of keratinized tissue. An autogenous bone block harvested from the chin associated with heterologous bone particles was used to re...

  16. Alveolar Ridge Contouring with Free Connective Tissue Graft at Implant Placement: A 5-Year Consecutive Clinical Study.

    Science.gov (United States)

    Hanser, Thomas; Khoury, Fouad

    2016-01-01

    This study evaluated volume stability after alveolar ridge contouring with free connective tissue grafts at implant placement in single-tooth gaps. A total of 52 single-tooth gaps with labial volume deficiencies in the maxilla (incisors, canines, and premolars) were consecutively treated with implants and concomitant free palatal connective tissue grafts in 46 patients between 2006 and 2009. Implants had to be covered with at least 2 mm peri-implant local bone after insertion. At implant placement, a free connective tissue graft from the palate was fixed inside a labial split-thickness flap to form an existing concave buccal alveolar ridge contour due to tissue volume deficiency into a convex shape. Standardized volumetric measurements of the labial alveolar contour using a template were evaluated before connective tissue grafting and at 2 weeks, 1 year, and 5 years after implantprosthetic incorporation. Tissue volume had increased significantly (P tissue contour of the implant before connective tissue grafting to baseline (2 weeks after implant-prosthetic incorporation). Statistically, 50% of the reference points (P > .05) kept their volume from baseline to 1 year after prosthetic incorporation and from baseline to 5 years after prosthetic incorporation, respectively, whereas reference points located within the area of the implant sulcus showed a significant (P connective tissue grafting appears to be an appropriate long-term means to contour preexisting buccal alveolar volume deficiencies in single implants.

  17. Human Studies of Vertical and Horizontal Alveolar Ridge Augmentation Comparing Different Types of Bone Graft Materials: A Systematic Review.

    Science.gov (United States)

    Chavda, Suraj; Levin, Liran

    2018-02-01

    Alveolar ridge augmentation can be completed with various types of bone augmentation materials (autogenous, allograft, xenograft, and alloplast). Currently, autogenous bone is labeled as the "gold standard" because of faster healing times and integration between native and foreign bone. No systematic review has currently determined whether there is a difference in implant success between various bone augmentation materials. The purpose of this article was to systematically review comparative human studies of vertical and horizontal alveolar ridge augmentation comparing different types of bone graft materials (autogenous, allograft, xenograft, and alloplast). A MEDLINE search was conducted under the 3 search concepts of bone augmentation, dental implants, and alveolar ridge augmentation. Studies pertaining to socket grafts or sinus lifts were excluded. Case reports, small case series, and review papers were excluded. A bias assessment tool was applied to the final articles. Overall, 219 articles resulted from the initial search, and 9 articles were included for final analysis. There were no discernible differences in implant success between bone augmentation materials. Generally, patients preferred nonautogenous bone sources as there were fewer hospital days, less pain, and better recovery time. Two articles had industrial support; however, conclusions of whether that support influenced the outcomes could not be determined. Future comparative studies should compare nonautogenous bone sources and have longer follow-up times.

  18. Polyhedral microcrystals encapsulating bone morphogenetic protein 2 improve healing in the alveolar ridge.

    Science.gov (United States)

    Matsumoto, Goichi; Ueda, Takayo; Sugita, Yoshihiko; Kubo, Katsutoshi; Mizoguchi, Megumi; Kotani, Eiji; Oda, Naoki; Kawamata, Shin; Segami, Natsuki; Mori, Hajime

    2015-08-01

    Atelocollagen sponges incorporating polyhedra encapsulating bone morphogenetic protein 2 (BMP-2) were implanted into lateral bone defects in the mandible. Half of the bone defects on the left side were treated with atelocollagen sponges containing 1.8 × 10(7) BMP-2 polyhedra, and half were treated with sponges containing 3.6 × 10(6) BMP-2 polyhedra. As controls, we treated the right-side bone defects in each animal with an atelocollagen sponge containing 5 µg of recombinant human BMP-2 (rhBMP-2) or 1.8 × 10(7) empty polyhedral. After a healing period of six months, whole mandibles were removed for micro-computed tomography (CT) and histological analyses. Micro-CT images showed that more bone had formed at all experimental sites than at control sites. However, the density of the new bone was not significantly higher at sites with an atelocollagen sponge containing BMP-2 polyhedra than at sites with an atelocollagen sponge containing rhBMP-2 or empty polyhedra. Histological examination confirmed that the BMP-2 polyhedra almost entirely replaced the atelocollagen sponges and connected the original bone with the regenerated bone. These results show that the BMP-2 delivery system facilitates the regeneration of new bone in the mandibular alveolar bone ridge and has an advance in the technology of bone regeneration for implant site development. © The Author(s) 2015.

  19. Photoelastic Stress Analysis Surrounding Implant-Supported Prosthesis and Alveolar Ridge on Mandibular Overdentures

    Directory of Open Access Journals (Sweden)

    Dorival Pedroso da Silva

    2010-01-01

    Full Text Available The purpose of this research was to evaluate the maximum stress around osseointegrated implants and alveolar ridge, in a mandible with left partial resection through a photoelastic mandibular model. The first group consisted of two implants: traditional model (T, implants placed in the position of both canines; fulcrum model (F, implants placed in the position of left canine CL and right lateral incisor LiR. Both models linked through a bar and clips. The second group was consisted of three implants, with implants placed in the position of both canines (CR and CL and the right lateral incisor (LiR, which composed four groups: (1 model with 3 “O” rings, (2 model 2 ERAs, bar with clips, (3 model 2 ERAs bar without clips; (4 model “O” ring bar and ERA. An axial and an oblique load of 6.8 kgf was applied on a overdenture at the 1st Pm, 2nd Pm, and 1st M. Results showed that the area around the left canine (CL was practically free of stress; the left lateral incisor (LiL developed only small tensions, and low stress in all the other cases; the right canine tooth suffered the largest concentrations of stress, mainly with the ERA retention mechanism.

  20. Immediate provisionalization of dental implants placed in healed alveolar ridges and extraction sockets: a 5-year prospective evaluation.

    Science.gov (United States)

    Cooper, Lyndon F; Reside, Glenn J; Raes, Filiep; Garriga, Joan Soliva; Tarrida, Luis Giner; Wiltfang, Jörg; Kern, Matthias; De Bruyn, Hugo

    2014-01-01

    This 5-year prospective multicenter study compared implant survival and success, peri-implant health and soft tissue responses, crestal bone level stability, and complication rates following immediate loading of single OsseoSpeed implants placed in anterior maxillary healed ridges or extraction sockets. Individuals requiring anterior tooth replacement with single implants were treated and immediately provisionalized. Definitive all-ceramic crowns were placed at 12 weeks. Implant survival, bone levels, soft tissue levels, and peri-implant health were monitored for 5 years. One hundred thirteen patients received implants in fresh sockets (55) and healed ridges (58). After 5 years, 45 and 49 patients remained for evaluation, respectively. During the first year, three implants failed in the extraction socket group (94.6% survival) and one implant failed in the healed ridge group (98.3% survival); this difference was not significant. No further implant failures were recorded. After 5 years, the interproximal crestal bone levels were located a mean of 0.43 ± 0.63 mm and 0.38 ± 0.62 mm from the reference points of implants in sockets and healed ridges (not a significant difference). In both groups, papillae increased over time and peri-implant mucosal zenith positions were stable from the time of definitive crown placement in sockets and healed ridges. Compared to flap surgery for implants in healed ridges, flapless surgery resulted in increased peri-implant mucosal tissue dimension (average, 0.78 ± 1.34 mm vs 0.19 ± 0.79 mm). After 5 years, the bone and soft tissue parameters that characterize implant success and contribute to dental implant esthetics were similar following the immediate provisionalization of implants in sockets and healed ridges. The overall tissue responses and reported implant survival support the immediate provisionalization of dental implants in situations involving healed ridges and, under ideal circumstances, extraction sockets.

  1. A preliminary study of local administration of dexamethasone after tooth extraction: Better preservation of residual alveolar ridge?

    Directory of Open Access Journals (Sweden)

    Poštić Srđan D.

    2014-01-01

    Full Text Available Background/Aim. It is important that the height of the edentulous alveolar ridge after tooth extraction remains at a reasonable acceptable level for as long as possible. The aim of this study was to report preliminary results of the clinical effect of local oral submucous administration of dexamethasone after tooth extractions in order to prepare alveolar supporting tissues for acceptance of removable dentures. Methods. In a total of 15 patients (11 partially and 4 completely edentulous the quantity of 0.25 mL to 0.5 mL of dexamethasone was injected bucally and orally in the region of the tooth socket after complicated extractions. Results. Healing of extraction wounds was uneventful in all the patients, without pain or local inflammation. Conclusion. Dexamethasone can be locally applied to oral tissues to prevent post-extraction inflammation and extensive resorption of the residual alveolar ridge. The obtained results are promising for patients undergoing classic prosthodontic rehabilitation soon after tooth extraction, demonstrating that there are no adverse effects after local oral corticosteroids administration. [Projekat Ministarstva nauke Republike Srbije, br. 175021

  2. Alveolar bone changes after rapid maxillary expansion with tooth-born appliances: a systematic review.

    Science.gov (United States)

    Lo Giudice, Antonino; Barbato, Ersilia; Cosentino, Leandro; Ferraro, Claudia Maria; Leonardi, Rosalia

    2017-08-10

    During rapid maxillary expansion (RME), heavy forces are transmitted to the maxilla by the anchored teeth causing buccal inclination and buccal bone loss of posterior teeth. To systematically review the literature in order to investigate whether RME causes periodontal sequelae, assessed by cone-beam computed tomography (CBCT). Fifteen electronic databases and reference lists of studies were searched up to March 2017. To be included in the systematic review, articles must be human studies on growing subjects, with transversal maxillary deficiency treated with RME and with assessment of buccal bone loss by CBCT images. Only randomized and non-randomized trials were included. Two authors independently performed study selection, data extraction, and risk of bias assessment. Study characteristics (study design, sample size, age, sex, skeletal maturity, type of appliance, daily activation, evaluated linear measurements, observation period, CBCT settings), and study outcomes (loss of buccal bone thickness and marginal bone) were reported according to the PRISMA statement. On the basis of the applied inclusion criteria, only six articles, three randomized clinical trials and three controlled clinical trials were included. An individual analysis of the selected articles was undertaken. The risks of bias of the six trials were scored as medium to low. The results of the present systematic review are based on a limited number of studies and only one study included a control group. In all considered studies, significant loss of buccal bone thickness and marginal bone level were observed in anchored teeth, following RME. Further prospective studies correlating the radiological data of bone loss to the periodontal soft tissues reaction after RME are required. A preliminary evaluation of the patient-related risk factors for RR may be advisable when considering to administering RME. This systematic review was registered in the National Institute of Health Research database with an

  3. Healing at implants placed in an alveolar ridge with a sloped configuration: an experimental study in dogs.

    Science.gov (United States)

    Abrahamsson, Ingemar; Welander, Maria; Linder, Elena; Berglundh, Tord

    2014-02-01

    To study healing around implants placed in an alveolar ridge with a sloped lingual-buccal configuration. Six Labrador dogs were used. Buccal bone defects were prepared in the mandible after extraction of premolars. Three months later, two test implants with a sloped marginal design and two control implants were placed in the chronic defect area with a sloped lingual-buccal configuration of each premolar region. The test implants were placed in such a way that the buccal margin of the implant coincided with the buccal bone crest. The lingual margin of the control implants was placed to a similar depth as the lingual margin of the test implants. Abutments were connected to the implants in the right mandibular premolar region and flaps were sutured around the neck of the abutments. In the left side of the mandible, cover screws were placed and the flaps were sutured to cover the implants. Biopsies were obtained 4 months later and prepared for histological examination. It was demonstrated that healing around implants placed in an alveolar ridge with a sloped lingual-buccal configuration resulted in the preservation of a vertical discrepancy between the lingual and buccal marginal bone levels around implants with either a regular cylindrical outline or a modified marginal portion that matched the slope of the alveolar ridge. As the marginal buccal portion of the control implants with a regular design had no bone support, it is suggested that implants with a modified marginal portion may be considered in recipient sites with a sloped lingual-buccal configuration. © 2012 Wiley Periodicals, Inc.

  4. Age-related new bone formation following the use of cancellous bone-block allografts for reconstruction of atrophic alveolar ridges.

    Science.gov (United States)

    Nissan, Joseph; Kolerman, Roni; Chaushu, Liat; Vered, Marilena; Naishlos, Sarit; Chaushu, Gavriel

    2018-02-01

    An age-related decrease in the number of osteogenic progenitor cells may compromise bone augmentation. Histomorphometrical assessment of age-related new bone formation, following atrophic alveolar ridge reconstruction, using cancellous bone-block allografts. Ninety-three consecutive patients (58 females and 35 males) were referred for implant-supported restoration of 122 severe atrophic alveolar ridges. Alveolar ridge deficiency locations were classified as anterior maxilla (n = 58), posterior maxilla (n= 32), and posterior mandible (n = 32). A bony deficiency of at least 3 mm horizontally and up to 3 mm vertically according to computerized tomography (CT) in the posterior mandible and anterior maxilla, served as inclusion criteria. In the posterior maxilla, a residual alveolar ridge up to 4 mm vertically according to CT served as inclusion criteria. Augmentation was performed by the use of cancellous bone-block allografts. Bone biopsies (9-month posterior maxilla, 4 months anterior maxilla and posterior mandible) of young (≤40 years) versus older (>40 years) patients were histomorphometrically evaluated. In the posterior maxilla, no statistically significant histomorphometric differences were noted. While at the anterior maxilla and posterior mandible, statistically significant more newly formed bone was found in young versus older individuals, respectively (38.6% vs 19.8%, P = 0.04 and 69% vs 31%, P = .05). New bone formation following residual alveolar ridge bone grafting is age-related. Longer bone consolidation and healing time may be recommended for older individuals. © 2017 Wiley Periodicals, Inc.

  5. Orthodontic treatment of severe anterior open bite and alveolar bone defect complicated by an ankylosed maxillary central incisor: a case report.

    Science.gov (United States)

    Lin, Feiou; Sun, Hao; Yao, Linjie; Chen, Qiushuo; Ni, Zhenyu

    2014-11-21

    Incisor trauma is common in children, and can cause severe complications during adolescent growth and development. This report describes the treatment of a 16-year-old patient with severe anterior open bite due to ankylosis of the maxillary left incisor after dental trauma as an 8-year-old. No examination or active treatment was undertaken until he was 16 years old. Clinical examination revealed that the maxillary left incisor was severely intruded accompanied by a vertical alveolar bone defect. Orthodontic treatment combined with surgical luxation took 3 years and 7 months. During treatment, the intruded incisor was moved to the occlusal level and the alveolar bone defect was restored, achieving normal occlusion. After two years of retention, the maxillary left incisor was retained in a stable normal position with a slightly reduced overbite. This case demonstrates that surgical luxation with orthodontic traction can be an effective approach, especially when the ankylosed tooth has a single root. Long-term monitoring of orthodontic stability and the maintenance of periodontal health are crucial in the post-treatment period.

  6. Bone graft healing in alveolar osteoplasty in patients with unilateral lip, alveolar process, and palate clefts.

    Science.gov (United States)

    Rychlik, Dariusz; Wójcicki, Piotr

    2012-01-01

    Secondary osteoplasty by means of autogenic spongy bone grafting is the most common procedure used in the reconstruction of the continuity of the maxillary alveolar process. The aim of the study was to analyze retrospectively the effect of certain factors on the course of the bone graft healing process in patients with unilateral complete clefts of the lip, alveolar process, and palate. The investigations involved 62 children aged 8 to 14 years (mean age, 11 years) with unilateral complete cleft of the lip, alveolar process, and palate operated on at the Clinic of Plastic Surgery in Polanica Zdrój from November 2007 to April 2009. All the procedures consisted in the reconstruction of the maxillary alveolar process by means of autogenic spongy bone grafting from the iliac bone. The analysis was performed on the basis of computed tomography scans presenting maxillary alveolar processes in the horizontal cross-sectional planes performed on the second or third postoperative day and after 6 months. They were used as the basis for the measurement of the volume and density (condensation) of the bone graft, the surface of its adhesion to the maxillary alveolar bone, and the volume and density of the healed bone. The following correlation coefficients were determined: between the adhesion surface of the bone to the alveolar bone and the volume of the healed bone, between the adhesion surface of the bone to the alveolar bone and the density of the healed bone, and between the density of the graft and the volume of the healed bone. Increasing the surface of the graft adhesion to the bone ridges of the alveolar cleft contributes to increased volume of the healed bone and slows down the increase in its density (on 6-month follow-up). Crushing of the bone graft increases its resorption and reduces volume of the healed bone.

  7. Lateral ridge split and immediate implant placement in moderately resorbed alveolar ridges: How much is the added width?

    Directory of Open Access Journals (Sweden)

    Amin Rahpeyma

    2013-01-01

    Full Text Available Background: Lateral ridge split technique is a way to solve the problem of the width in narrow ridges with adequate height. Simultaneous insertion of dental implants will considerably reduce the edentulism time. Materials and Methods: Twenty-five patients who were managed with ridge splitting technique were enrolled. Thirty-eight locations in both jaws with near equal distribution in quadrants received 82 dental fixtures. Beta Tricalcium phosphate (Cerasorb® was used as biomaterial to fill the intercortical space. Submerged implants were used and 3 months later healing caps were placed. Direct bone measurements before and after split were done with a Collis. Patients were clinically re-evaluated at least 6 months after implant loading. All the data were analyzed by Statistical Package for Social Sciences (SPSS software version 11.5 (SPSS Inc, Chicago Illinois, USA. Frequency of edentulous spaces and pre/post operative bone width was analyzed. Paired t-test was used for statistical analysis. Difference was considered significant if P value was less than 0.05. Results: Mean value for presplit width was 3.2 ± 0.34 mm while post-split mean width was 5.57 ± 0.49 mm. Mean gain in crest ridge after ridge splitting was 2 ± 0.3 mm. Statistical analysis showed significant differences in width before and after operation ((P < 0.05. All implants (n = 82 survived and were in full function at follow up (at least 6 months after implant loading. Conclusion: Ridge splitting technique in both jaws showed the predictable outcomes, if appropriate cases selected and special attention paid to details; then the waiting time between surgery and beginning of prosthodontic treatment can be reduced to 3 month.

  8. Alveolar Ridge Preservation with nc-HA and d-PTFE Membrane: A Clinical, Histologic, and Histomorphometric Study.

    Science.gov (United States)

    Laurito, Domenica; Lollobrigida, Marco; Gianno, Francesca; Bosco, Sandro; Lamazza, Luca; De Biase, Alberto

    Alveolar ridge preservation has become a very common procedure following tooth extraction. This study presents a clinical, histologic, and histomorphometric analysis of postextraction bone changes using nanocrystalline hydroxyapatite (nc-HA) and exposed high-density polytetrafluoroethylene (d-PTFE) membrane. A total of 10 extraction sockets were treated. Clinical measurements were taken after tooth extraction with a customized acrylic stent to ensure the same measurement points. At 6 months, clinical measurements were repeated and bone specimens taken. An overall bone reduction was observed. The histologic and histomorphometric analysis revealed newly formed bone (25.92% ± 18.78%), soft tissue (28.55% ± 9.73%), and residual graft particles (15.43% ± 11.08%). Further studies are necessary to evaluate the efficacy of this technique over the long term.

  9. Hard and Soft Tissue Management of a Localized Alveolar Ridge Atrophy with Autogenous Sources and Biomaterials: A Challenging Clinical Case

    Directory of Open Access Journals (Sweden)

    C. Maiorana

    2016-01-01

    Full Text Available Particularly in the premaxillary area, the stability of hard and soft tissues plays a pivotal role in the success of the rehabilitation from both a functional and aesthetic aspect. The present case report describes the clinical management of a localized alveolar ridge atrophy in the area of the upper right canine associated with a thin gingival biotype with a lack of keratinized tissue. An autogenous bone block harvested from the chin associated with heterologous bone particles was used to replace the missing bone, allowing for a prosthetic driven implant placement. Soft tissues deficiency was corrected by means of a combined epithelialized and subepithelial connective tissue graft. The 3-year clinical and radiological follow-up demonstrated symmetric gingival levels of the upper canines, with physiological peri-implant probing depths and bone loss. Thus, the use of autogenous tissues combined with biomaterials might be considered a reliable technique in case of highly aesthetic demanding cases.

  10. Biomaterial shell bending with 3D-printed templates in vertical and alveolar ridge augmentation: a technical note.

    Science.gov (United States)

    Draenert, Florian G; Gebhart, Florian; Mitov, Gergo; Neff, Andreas

    2017-06-01

    Alveolar ridge and vertical augmentations are challenging procedures in dental implantology. Even material blocks with an interconnecting porous system are never completely resorbed. Shell techniques combined with autologous bone chips are therefore the gold standard. Using biopolymers for these techniques is well documented. We applied three-dimensional (3-D) techniques to create an individualized bending model for the adjustment of a plane biopolymer membrane made of polylactide. Two cases with a vertical alveolar ridge defect in the maxilla were chosen. The cone beam computed tomography data were processed with a 3-D slicer and the Autodesk Meshmixer to generate data about the desired augmentation result. STL data were used to print a bending model. A 0.2-mm poly-D, L-lactic acid membrane (KLS Matin Inc., Tuttlingen, Germany) was bended accordingly and placed into the defect via a tunnel approach in both cases. A mesh graft of autologous bone chips and hydroxylapatite material was augmented beneath the shell, which was fixed with osteosynthesis screws. The operative procedure was fast and without peri- or postoperative complications or complaints. The panoramic x-ray showed correct fitting of the material in the location. Bone quality at the time of implant placement was type II, resulting in good primary stability. A custom-made 3-D model for bending confectioned biomaterial pieces is an appropriate method for individualized adjustment in shell techniques. The advantages over direct printing of the biomaterial shell and products on the market, such as the Xyoss shell (Reoss Inc., Germany), include cost-efficiency and avoidance of regulatory issues. Copyright © 2016 Elsevier Inc. All rights reserved.

  11. Alveolar Ridge Preservation Using a Novel Synthetic Grafting Material: A Case with Two-Year Follow-Up

    Directory of Open Access Journals (Sweden)

    Peter Fairbairn

    2018-01-01

    Full Text Available This case report highlights the use of a novel in situ hardening synthetic (alloplastic, resorbable, bone grafting material composed of beta tricalcium phosphate and calcium sulfate, for alveolar ridge preservation. A 35-year-old female patient was referred by her general dentist for extraction of the mandibular right first molar and rehabilitation of the site with a dental implant. The nonrestorable tooth was “atraumatically” extracted without raising a flap, and the socket was immediately grafted with the synthetic biomaterial and covered with a hemostatic fleece. No membrane was used, and the site was left uncovered without obtaining primary closure, in order to heal by secondary intention. After 12 weeks, the architecture of the ridge was preserved, and clinical observation revealed excellent soft tissue healing without loss of attached gingiva. At reentry for placement of the implant, a bone core biopsy was obtained, and primary implant stability was measured by final seating torque and resonance frequency analysis. Histological analysis revealed pronounced bone regeneration while high levels of primary implant stability were recorded. The implant was successfully loaded 12 weeks after placement. Clinical and radiological follow-up examination at two years revealed stable and successful results regarding biological, functional, and esthetic parameters.

  12. Distracción osteogénica alveolar: una alternativa en la reconstrucción de rebordes alveolares atróficos: Descripción de 10 casos Alveolar distraction osteogenesis: an alternative in the reconstruction of atrophic alveolar ridges: Report of 10 cases

    Directory of Open Access Journals (Sweden)

    P.E. Maurette O’Brien

    2004-02-01

    Full Text Available La distracción osteogénica alveolar (DOA es un método alternativo para la reconstrucción de rebordes alveolares atróficos que ofrece un resultado previsible y que disminuye los tiempo de espera entre la reconstrucción del reborde alveolar atrófico y la colocación de los implantes óseo-integrados, en comparación con los métodos tradicionalmente utilizados. Fueron atendidos 10 pacientes que presentaban deficiencia de reborde alveolar mandibular y/o maxilar por medio de distracción osteogénica, utilizando un dispositivo yuxtaoseo (Conexión Implant System® - SP-Brasil. Todos los pacientes fueron atendidos de forma ambulatoria, bajo anestesia local y sedación conciente, comenzando la activación del dispositivo a los 7 días posteriores a la instalación, con un patrón de activación de 1 mm diarios hasta alcanzar la altura ósea deseada. Posteriormente se aguardaron 10 semanas como parte del periodo de consolidación ósea y se realizo la colocación de los implantes oseointegrados y local y el retiro del dispositivo de distracción, pudiéndose comprobar clínica y radiográficamente la ganancia de la altura y volumen óseo necesario para la rehabilitación por medio de implantes.The alveolar distraction osteogenesis is an alternative method for the reconstruction of atrophic alveolar ridges with success, that decrease the time of wait between the reconstruction of the alveolar ridge and the placement of the osseointegrated implants in comparison with the traditionally used methods. 10 patients that presented deficiency of the alveolar ridge in the maxilla and/or mandible were assisted by means of distraction osteogenesis, using a juxtaosseous device (Conexion Implant System® - SP-Brazil. All the patients were assisted of form ambulatory, under local anesthesia and conscientious sedation, beginning the activation from the device 7 days later to the installation, with a pattern of activation 1 mm diary until reaching the wanted

  13. Special distraction osteogenesis before bone grafting for alveolar cleft defects to correct maxillary deformities in patients with bilateral cleft lips and palates: distraction osteogenesis performed separately for each bone segment.

    Science.gov (United States)

    Mitsukawa, Nobuyuki; Saiga, Atsuomi; Morishita, Tadashi; Satoh, Kaneshige

    2014-07-01

    Patients with bilateral cleft lips and palates have premaxillary protrusion and characteristic jaw deformities involving three-dimensional malposition of the premaxilla and bilateral maxillary bone segments. This study examined patients with bilateral cleft lips and palates who had deviation and hypoplasia of the premaxillas and bilateral maxillary segments. Before bone grafting, the patients were treated with special distraction performed separately for each bone segment using a halo-type external device. This report describes this novel treatment method which produced good results. The subjects were five patients with severe jaw deformities due to bilateral cleft lip and palate. They were treated with maxillary Le Fort I osteotomy and subsequent distraction performed separately for each bone segment using a halo device. In three of five patients, premaxillary osteotomy was not performed, and osteotomy and distraction were performed only for the right and left lateral segments with severe hypoplasia. All patients achieved distraction close to the desired amount. The widths of the alveolar clefts were narrowed, and satisfactory occlusion and maxillary arch form were achieved. After the surgery, three of five patients underwent bone grafting for bilateral alveolar cleft defects and the bone graft survival was satisfactory. This method had many benefits, including narrowing of alveolar clefts, improvement of maxillary hypoplasia, and achievement of a good maxillary arch form. In addition, subsequent bone grafting for alveolar cleft defects was beneficial, dental prostheses were unnecessary, and frequency of surgery and surgical invasiveness were reduced. This method is a good surgical procedure that should be considered for patients with bilateral cleft lips and palates who have premaxillary protrusion and hypoplasia of the right and left lateral segments. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights

  14. A methodological approach to assessing alveolar ridge preservation procedures in humans: soft tissue profile.

    Science.gov (United States)

    Vanhoutte, Vanessa; Rompen, Eric; Lecloux, Geoffrey; Rues, Stefan; Schmitter, Marc; Lambert, France

    2014-03-01

    The aesthetic results of implant restoration in the anterior maxilla are particularly related to the soft tissue profile. Although socket preservation techniques appear to reduce bone remodelling after tooth extraction, there is still few investigations assessing the external soft tissue profile after such procedures. The goal of this study was to describe an accurate technique to evaluate soft tissue contour changes after performing socket preservation procedures. The secondary objective was to apply the newly developed measuring method to a specific socket preservation using a "saddled" connective tissue graft combined with the insertion of slowly resorbable biomaterials into the socket. A total of 14 patients needing tooth replacement in the aesthetic region were included to receive a socket preservation procedure using a connective tissue graft. Impressions were taken before the tooth extraction (baseline) and at 2, 4, and 12 weeks after the procedure. The corresponding plaster casts were scanned, and the evolution of the soft tissue profile in relation to the baseline situation was assessed using imaging software. The measuring technique allowed assessing the soft tissue profiles accurately at different levels of the alveolar process. The insertion of a saddled connective tissue appeared to compensate for the horizontal and vertical bone remodelling after a socket preservation procedure in most regions of the alveolar crest. After 12 weeks, the only significant change was located in the more cervical and central region of the alveolar process and reached a median drop of 0.62 mm from baseline. Within the limitations of this study, we found that a saddled connective tissue graft combined with a socket preservation procedure could almost completely counteract the bone remodelling in terms of the external soft tissue profile. The minor changes found in the cervical region might disappear with the emergence profile of the prosthodontic components. The described

  15. [Anterior bridges with the IPS-Empress-2 System after alveolar ridge augmentation. A case report].

    Science.gov (United States)

    Zawta, C; Bernhard, M

    2000-01-01

    The success of a prosthesis is judged according to optimal function, good chewing comfort, adequate phonetics and white and pink esthetics. The aim of a treatment is to approach the perfection of nature. For anterior bridgework, the all-ceramic System IPS Empress 2 offers light transmission and reflection comparable to that of natural teeth, provided that the pink esthetics are optimised in the preprosthetic phase. The provision of an anterior bridge in the IPS Empress 2-system is presented here in the form of a case report. After extraction of the anterior teeth, a ridge augmentation including preparation of the pontic bed was carried out. The type of post and core, preparation and cementation are important parameters for the success of all-ceramic restorations.

  16. Crecimiento maxilar según severidad de hendidura labial, alveolar y palatina unilateral Maxillary growth according to the severity of unilateral cleft lip and palate

    Directory of Open Access Journals (Sweden)

    M.C. Navas-Aparicio

    2012-12-01

    ón de crecimiento anterior del maxilar. Como conclusión, la asimetría transversal del arco maxilar fue el hallazgo más importante en este estudio. Se debe realizar un nueva investigación con respecto a la dimensión transversal del maxilar en niños con labio y paladar hendido, ya que existe una alteración de la misma. La posición anterior del maxilar y la longitud del maxilar no estuvieron influenciadas por la severidad de la hendidura. Es importante considerar que el crecimiento maxilar puede estar afectado por factores individuales, tales como el patrón facial genético. De igual manera, deberá efectuarse también un nueva medición hasta que el crecimiento de la cara haya finalizado.The inhibition of the growth and development resulting of a surgical treatment in patients with cleft lip and palate is a widely discussed topic in the world. According to literature, tissue deficiency, probably due to the cleft width and position of the alveolar segments, is a considerable variable that affects the growth of the maxilla, which is also influenced by the surgical correction of the lip, the nose and the palate by scarring, types of surgical treatment, time of the surgery, surgeon skills and pre-surgical orthopedics. The purpose of this study was to determine the possible associations between the severity of cleft and maxillary growth in patients with non-syndromic unilateral cleft lip and palate, who were born in 2001 and treated at the Hospital Nacional de Niños "Dr. Carlos Sáenz Herrera", Caja Costarricense de Seguro Social, San José, Costa Rica. The study was retrospective and descriptive, based on data obtained from medical records, initial maxillary study casts of the newborn child, cephalometric radiograph and the present study casts of the child at the age of 5 years. The study sample comprised of 13 patients. The maxillary transverse arch of 12 cases was asymmetric, indicating an alteration of growth in this direction. There is a statistically

  17. Alveolar Ridge Reconstruction with Titanium Meshes and Simultaneous Implant Placement: A Retrospective, Multicenter Clinical Study

    Directory of Open Access Journals (Sweden)

    Raquel Zita Gomes

    2016-01-01

    Full Text Available Objective. To evaluate horizontal bone gain and implant survival and complication rates in patients treated with titanium meshes placed simultaneously with dental implants and fixed over them. Methods. Twenty-five patients treated with 40 implants and simultaneous guided bone regeneration with titanium meshes (i–Gen®, MegaGen, Gyeongbuk, Republic of Korea were selected for inclusion in the present retrospective multicenter study. Primary outcomes were horizontal bone gain and implant survival; secondary outcomes were biological and prosthetic complications. Results. After the removal of titanium meshes, the CBCT evaluation revealed a mean horizontal bone gain of 3.67 mm (±0.89. The most frequent complications were mild postoperative edema (12/25 patients: 48% and discomfort after surgery (10/25 patients: 40%; these complications were resolved within one week. Titanium mesh exposure occurred in 6 patients (6/25 : 24%: one of these suffered partial loss of the graft and another experienced complete graft loss and implant failure. An implant survival rate of 97.5% (implant-based and a peri-implant marginal bone loss of 0.43 mm (±0.15 were recorded after 1 year. Conclusions. The horizontal ridge reconstruction with titanium meshes placed simultaneously with dental implants achieved predictable satisfactory results. Prospective randomized controlled trials on a larger sample of patients are required to validate these positive outcomes.

  18. Assessment of Temperature Rise and Time of Alveolar Ridge Splitting by Means of Er:YAG Laser, Piezosurgery, and Surgical Saw: An Ex Vivo Study.

    Science.gov (United States)

    Matys, Jacek; Flieger, Rafał; Dominiak, Marzena

    2016-01-01

    The most common adverse effect after bone cutting is a thermal damage. The aim of our study was to evaluate the bone temperature rise during an alveolar ridge splitting, rating the time needed to perform this procedure and the time to raise the temperature of a bone by 10°C, as well as to evaluate the bone carbonization occurrence. The research included 60 mandibles ( n = 60) of adult pigs, divided into 4 groups ( n = 15). Two vertical and one horizontal cut have been done in an alveolar ridge using Er:YAG laser with set power of 200 mJ (G1), 400 mJ (G2), piezosurgery unit (G3), and a saw (G4). The temperature was measured by K-type thermocouple. The highest temperature gradient was noted for piezosurgery on the buccal and lingual side of mandible. The temperature rises on the bone surface along with the increase of laser power. The lower time needed to perform ridge splitting was measured for a saw, piezosurgery, and Er:YAG laser with power of 400 mJ and 200 mJ, respectively. The temperature rise measured on the bone over 10°C and bone carbonization occurrence was not reported in all study groups. Piezosurgery, Er:YAG laser (200 mJ and 400 mJ), and surgical saw are useful and safe tools in ridge splitting surgery.

  19. Assessment of Temperature Rise and Time of Alveolar Ridge Splitting by Means of Er:YAG Laser, Piezosurgery, and Surgical Saw: An Ex Vivo Study

    Directory of Open Access Journals (Sweden)

    Jacek Matys

    2016-01-01

    Full Text Available The most common adverse effect after bone cutting is a thermal damage. The aim of our study was to evaluate the bone temperature rise during an alveolar ridge splitting, rating the time needed to perform this procedure and the time to raise the temperature of a bone by 10°C, as well as to evaluate the bone carbonization occurrence. The research included 60 mandibles (n=60 of adult pigs, divided into 4 groups (n=15. Two vertical and one horizontal cut have been done in an alveolar ridge using Er:YAG laser with set power of 200 mJ (G1, 400 mJ (G2, piezosurgery unit (G3, and a saw (G4. The temperature was measured by K-type thermocouple. The highest temperature gradient was noted for piezosurgery on the buccal and lingual side of mandible. The temperature rises on the bone surface along with the increase of laser power. The lower time needed to perform ridge splitting was measured for a saw, piezosurgery, and Er:YAG laser with power of 400 mJ and 200 mJ, respectively. The temperature rise measured on the bone over 10°C and bone carbonization occurrence was not reported in all study groups. Piezosurgery, Er:YAG laser (200 mJ and 400 mJ, and surgical saw are useful and safe tools in ridge splitting surgery.

  20. Light weight hollow maxillary complete denture: A case series

    Directory of Open Access Journals (Sweden)

    Laxman Singh Kaira

    2012-01-01

    Full Text Available Retention, stability and support are the basic principles on which the success of a complete denture relies on. The skill lies in applying these principles efficiently in critical situations. Residual ridge resorption occurs at a three times faster rate in mandibular arch than in the maxillary arch. The severely resorbed maxillary and mandibular edentulous arches that are narrow and constricted with increased interarch space provide decreased support, retention and stability. The consequent weight of the processed complete denture only compromises them further. The severely resorbed jaw can have various treatment options. Extreme resorption of the maxillary denture-bearing area may lead to problems with prosthetic rehabilitation. The advantage of a hollow maxillary or mandibular denture is the reduction of excessive weight of acrylic resin, which normally replaces lost alveolar ridge in the interridge space of the denture wearer. This clinical report describes two case reports of edentulous patients with resorbed ridges where a simplified technique of fabricating a light weight hollow maxillary complete denture was used for the preservation of denture bearing areas.

  1. Acceleration of Alveolar Ridge Augmentation Using a Low Dose of Recombinant Human Bone Morphogenetic Protein-2 Loaded on a Resorbable Bioactive Ceramic.

    Science.gov (United States)

    Fahmy, Rania A; Mahmoud, Naguiba; Soliman, Samia; Nouh, Samir R; Cunningham, Larry; El-Ghannam, Ahmed

    2015-12-01

    The aim of the present study was to evaluate the effect of a porous silica-calcium phosphate composite (SCPC50) loaded with and without recombinant human bone morphogenetic protein-2 (rhBMP-2) on alveolar ridge augmentation in saddle-type defects. Micro-granules of SCPC50 resorbable bioactive ceramic were coated with rhBMP-2 10 mg and then implanted into a saddle-type defect (12 × 7 mm) in a dog mandible and covered with a collagen membrane. Control groups included defects grafted with SCPC50 granules without rhBMP-2 and un-grafted defects. Bone healing was evaluated at 8 and 16 weeks using histologic and histomorphometric techniques. The increase in bone height and total defect fill were assessed for each specimen using the ImageJ 1.46 program. The release kinetics of rhBMP-2 was determined in vitro. The height of the bone in the grafted defects and the total defect fill were statistically analyzed. SCPC50 enhanced alveolar ridge augmentation as indicated by the increased vertical bone height, bone surface area, and bone volume after 16 weeks. SCPC50-rhBMP-2 provided a sustained release profile of a low effective dose (BMP-2 4.6 ± 1.34 pg/mL per hour) during the 1- to 21-day period. The slow rate of release of rhBMP-2 from SCPC50 accelerated synchronized complete bone regeneration and graft material resorption in 8 weeks. Successful rapid reconstruction of the alveolar ridge by SCPC50 and SCPC50-rhBMP-2 occurred without any adverse excessive bone formation, inflammation, or fluid-filled voids. Results of this study suggest that SCPC50 is an effective graft material to preserve the alveolar ridge after tooth extraction. Coating SCPC50-rhBMP-2 further accelerated bone regeneration and a considerable increase in vertical bone height. These findings make SCPC50 the primary choice as a carrier for rhBMP-2. SCPC50-rhBMP-2 can serve as an alternative to autologous bone grafting. Published by Elsevier Inc.

  2. MICROECOLOGY OF THE MUCOUS MEMBRANE OF THE ALVEOLAR RIDGES IN THE PERIOD OF ADAPTATION TO COMPLETE DENTURES

    Directory of Open Access Journals (Sweden)

    Yanishen I. V.,

    2016-06-01

    quantitative composition of the biocenosis. It is established that the microflora of the alveolar ridge in patients with edentulous consisted of associations of yeasts from 2-5 representatives of the microbial world. It is established that in patients of the experimental group on the 7th day of withdrawal 3-component microbial associations has decreased in 1.3 times, whereas the 4-component associations were recorded in 1.4 times more often compared with the initial period of observation. For patients with adhesive frequency of detection of 2-component microbial associations 30-the day of the research was 1.3 times higher than prior to the setting of the prosthesis. Identify 5 component associations for 30-the day, has decreased in 2 times. In patients without adhesive (control group 4-component microbial associations in the mouth after a week of adaptation to the prosthesis were detected in 1.6 times, and 30 days – in 2 times more often than to prosthetics. The weight 5 component associations through the week remained at the initial level, while after 30 days has increased in 1,5 times. The structure microbiocenosis the mucous of the oral cavity patients with edentulism are represented 13 genera of bacteria and morilioid fungi of the genus Candida, allocated in secondary amounts by lg (2,5±0,19 to lg (5,4±0,17 CFU/g. When adhesive between denture base and mucosa of the alveolar ridge frequency of withdrawal and the density of microbial colonization in the adaptation period were not statistically different. But the density of the microbial population among the control group increased 1.5 times for Enterococcus spp, 1.4 for the Klebsiella spp and 1.6 times for yeast fungi Candida spp. Found a significant decrease in microbial density of the representatives of the resident microflora in 1.4 times for Neisseria spp, 1.6-fold for Lactobacillus spp (p<0.05. Conclusion. The results of these studies indicate significant changes of qualitative and quantitative structure of

  3. Effects of ionizing radiation on wound healing of alveolar bone socket after extraction of rat maxillary molars

    Energy Technology Data Exchange (ETDEWEB)

    Iwata, Hiroshi; Yosue, Takashi [Nippon Dental Univ., Tokyo (Japan). School of Dentistry; Nasu, Masanori

    2001-05-01

    The purpose of this study was to examine the effects of radiation on the healing process of tooth extraction wounds. X-ray doses of 10 Gy or 20 Gy were delivered, once, to the maxillofacial area of Wistar-strain rats. Then, 24 hours after irradiation, the maxillary first molars were extracted bilaterally. The animals were sacrificed 3, 7, 10, 14, 21, 42, and 84 days after tooth extraction, and the maxilla were sliced, to make thin sections. These specimens were then double stained with alkaline phosphatase (ALP) and tartrate resistant acid phosphatase (TRAP). The ratio of bone area to socket area (bone formation ratio), the ratio of bone length to ALP positive area length (ALP positive ratio), and the number of TRAP-positive cells, were evaluated. The results showed: The bone formation ratios at days 3 and 7 after tooth extraction were significantly low in both irradiation groups, compared with those for the non-irradiation group. The ALP positive reaction ratio peaked 7 days after in the non-irradiation group. In both irradiation groups, the ratios that were worked out at 3 days and 7 days after were significantly lower than those in the non-irradiation group. There was no significant difference in the number of TRAP-positive cells between the non-irradiation group and the 10 Gy irradiation group. In the 20 Gy irradiation group, the TRAP-positive cell count plummeted to a significantly low level at 3 days after tooth extraction, compared with that in the non-irradiation group. (author)

  4. Effects of ionizing radiation on wound healing of alveolar bone socket after extraction of rat maxillary molars

    International Nuclear Information System (INIS)

    Iwata, Hiroshi; Yosue, Takashi; Nasu, Masanori

    2001-01-01

    The purpose of this study was to examine the effects of radiation on the healing process of tooth extraction wounds. X-ray doses of 10 Gy or 20 Gy were delivered, once, to the maxillofacial area of Wistar-strain rats. Then, 24 hours after irradiation, the maxillary first molars were extracted bilaterally. The animals were sacrificed 3, 7, 10, 14, 21, 42, and 84 days after tooth extraction, and the maxilla were sliced, to make thin sections. These specimens were then double stained with alkaline phosphatase (ALP) and tartrate resistant acid phosphatase (TRAP). The ratio of bone area to socket area (bone formation ratio), the ratio of bone length to ALP positive area length (ALP positive ratio), and the number of TRAP-positive cells, were evaluated. The results showed: The bone formation ratios at days 3 and 7 after tooth extraction were significantly low in both irradiation groups, compared with those for the non-irradiation group. The ALP positive reaction ratio peaked 7 days after in the non-irradiation group. In both irradiation groups, the ratios that were worked out at 3 days and 7 days after were significantly lower than those in the non-irradiation group. There was no significant difference in the number of TRAP-positive cells between the non-irradiation group and the 10 Gy irradiation group. In the 20 Gy irradiation group, the TRAP-positive cell count plummeted to a significantly low level at 3 days after tooth extraction, compared with that in the non-irradiation group. (author)

  5. Reconstruction of a Severely Atrophied Alveolar Ridge by Computer-Aided Gingival Simulation and 3D-Printed Surgical Guide: A Case Report.

    Science.gov (United States)

    Song, In-Seok; Lee, Mi-Ran; Ryu, Jae-Jun; Lee, Ui-Lyong

    Dental implants positioned in severely atrophied anterior maxillae require esthetic or functional compromises. This case report describes the rehabilitation of a severely atrophied alveolar ridge with a three-dimensional (3D) computer-aided design/computer-aided manufacture (CAD/CAM) surgical guide. A 50-year-old woman had a severely atrophied anterior maxilla with unfavorably positioned dental implants. Functional and esthetic prosthodontic restoration was difficult to achieve. An anterior segmental osteotomy was planned to reposition the dental implants. A 3D surgical guide was designed for precise relocation of the segment. The surgical guide firmly grasped the impression copings of the dental implants, minimizing surgical errors. Three-dimensional gingival simulation was used preoperatively to estimate the appropriate position of the gingiva. Rigid fixation to the surrounding bone allowed immobilization of the implant-bone segment. Satisfactory esthetic and functional outcomes were attained 6 months after surgery. Finally, a severely atrophied alveolar ridge with unfavorably positioned dental implants was recovered with minimal esthetic and functional deterioration using gingival simulation and a 3D CAD/CAM surgical guide.

  6. Ridge expansion and immediate placement with piezosurgery and screw expanders in atrophic maxillary sites: two case reports.

    Science.gov (United States)

    Kelly, Andrew; Flanagan, Dennis

    2013-02-01

    Endosseous dental implants may require bone augmentation before implant placement. Herein is described an approach to edentulous ridge expansion with the use of piezosurgery and immediate placement of implants. This may allow for a shortened treatment time and the elimination of donor-site morbidity. Two cases are reported. This technique uses a piezoelectric device to cut the crestal and proximal facial cortices. Space is then created with motorized osteotomes to widen the split ridge. This technique allows for expansion of narrow, anatomically limiting, atrophic ridges, creating space for immediate implant placement. The facial and lingual cortices provide support with vital osteocytes for osteogenesis. The 2 patients presented had adequate bone height for implant placement but narrow edentulous ridges. In patient 1 at site #11, the ridge crest was 3.12 mm thick and was expanded to accept a 4.3 mm × 13 mm implant. The resulting ridge width was 8.88 mm, which was verified using cone beam computerized tomography (CBCT). In patient 2 at site #8 and site #9, the narrow ridge was expanded using the same technique to accept 2 adjacent 3.5 mm × 14 mm implants. The implants were restored to a functional and esthetic outcome.

  7. Alveolar bone loss and mineralization in the pig with experimental periodontal disease

    Directory of Open Access Journals (Sweden)

    Mandee Yang

    2018-03-01

    Full Text Available Objective: To address how experimental periodontal disease affects alveolar bone mass and mineral apposition in a young pig model. Materials and methods: Seven three-month-old pigs were periodically inoculated with 4 types of periodontal bacteria, along with a ligature around the last maxillary deciduous molar for 8 weeks to induce periodontal disease (PG. Eight same-aged pigs served as the control (CG. Segmentations of 3D cone-beam CT images were performed to quantify volumes of the total alveolar bone, alveolar ridge, and all roots of the target molar. Calcein and alizarin were administered for labeling mineral apposition before euthanasia. The harvested molar blocks were sectioned and examined under epifluorescence. The inter-label distance between the two vital markers at regional bone surfaces were measured and mineral apposition rate (MAR was calculated. Results: A significant reduction of total alveolar bone volume was seen in PG with the major loss at the alveolar ridge. MAR was significantly higher at the root furcation region than those at both buccal and palatal ridges in CG. Compared with CG, PG animals showed more interrupted labeled bands with significantly lower MAR at the furcation region. MARs were positively associated with both the volumes of total alveolar bone and ridge in CG, but only with the total alveolar bone in PG. Conclusions: In young growing pigs, mineral apposition is region specific. The experimental periodontal disease not only leads to alveolar bone loss, but also perturbs mineral apposition for new bone formation, thus impairing the homeostasis of alveolar bone remodeling. Keyword: Dentistry

  8. Bone augmentation procedures in localized defects in the alveolar ridge: clinical results with different bone grafts and bone-substitute materials

    DEFF Research Database (Denmark)

    Jensen, Simon Storgård; Terheyden, Hendrik

    2009-01-01

    PURPOSE: The objective of this review was to evaluate the efficacy of different grafting protocols for the augmentation of localized alveolar ridge defects. MATERIALS AND METHODS: A MEDLINE search and an additional hand search of selected journals were performed to identify all levels of clinical...... evidence except expert opinions. Any publication written in English and including 10 or more patients with at least 12 months of follow-up after loading of the implants was eligible for this review. The results were categorized according to the presenting defect type: (1) dehiscence and fenestration...... periods. The heterogeneity of the available data did not allow identifying one superior grafting protocol for any of the osseous defect types under investigation. However, a series of grafting materials can be considered well-documented for different indications based on this review. There is a high level...

  9. Management of the flabby ridge using a modified window technique and polyvinylsiloxane impression material

    Directory of Open Access Journals (Sweden)

    Nawaf Labban

    2018-01-01

    Full Text Available Flabby ridge is a common clinical finding affecting the alveolar ridges of the mandibular or maxillary arches. The anterior region of maxilla is the most affected area in edentulous patients. Dentures on flabby ridges have compromised stability, support, and retention unless adequate measures for its management are employed. Methods applied for flabby ridge management, include surgical removal and augmentation, special impression techniques, balanced distribution of occlusal loads and implant therapy. Special impressions often involve window technique for static impression of flabby area, which present multiple challenges. The purpose of this technique report is to present a modified window technique for the impression of anterior maxillary flabby tissues for improved and controlled application of polyvinylsiloxane impression material that are routinely available in dental practice.

  10. Rare occurrence of the left maxillary horizontal third molar impaction ...

    African Journals Online (AJOL)

    Rare occurrence of the left maxillary horizontal third molar impaction, the right maxillary third molar vertical impaction and the left mandibular third molar vertical impaction with inferior alveolar nerve proximity in a 30 year old female: a case report.

  11. 3D-CT evaluation of secondary alveolar bone grafts in alveolar clefts

    Energy Technology Data Exchange (ETDEWEB)

    Naitoh, Hiroshi; Nishimura, Yoshihiko [Kyoto Univ. (Japan). Graduate School of Medicine; Yamawaki, Yoshiroh [Kyoto Katsura Hospital (Japan); Morimoto, Naoki [Kobe City General Hospital (Japan)

    2002-07-01

    From 1994 to 2000, we treated 116 patients with cleft alveolus by secondary alveolar bone grafts, and 48 of them were evaluated morphologically with 3D-CT. The frequency of successful bony bridging was significantly higher in the group whose grafts were completely enveloped (including the anterior alveolar ridge) with a mucoperiosteal flap. The frequency was also significantly higher in the group who underwent bone grafts at the age of 13 or less, and canine eruptions did not influence the ratio. Some cases showed such an improved growth pattern of grafted bone that the shape of the affected maxilla resembled that of the normal side, after long-term follow-up observations. The growth increment was remarkable in anterior maxillary height. Orthodontic management guides the canine or incisor into the reconstructed area of the previous cleft. We surmise that the new occlusal position puts pressure on the grafted bone and promotes further osteogenesis. These findings show that it is important to produce sufficient bony bridge to guide the canine or incisor, not the volume of grafted bone, in secondary alveolar bone grafts. Long-term follow-up observation, after more than 2-3 years, is also necessary to evaluate secondary alveolar bone grafts. (author)

  12. Localized ridge augmentation in the anterior maxilla using titanium mesh, an alloplast, and a nano-bone graft: a case report.

    Science.gov (United States)

    Alagl, Adel S; Madi, Marwa

    2018-05-01

    Alveolar ridge deficiency is considered a major limitation for successful implant placement, as well as for the long-term success rate, especially in the anterior maxillary region. Various approaches have been developed to increase bone volume. Among those approaches, inlay and onlay grafts, alveolar ridge distraction, and guided bone regeneration have been suggested. The use of titanium mesh is a reliable method for ridge augmentation. We describe a patient who presented with a localized, combined, horizontal and vertical ridge defect in the anterior maxilla. The patient was treated using titanium mesh and alloplast material mixed with a nano-bone graft to treat the localized ridge deformity for future implant installation. The clinical and radiographic presentation, as well as relevant literature, are presented.

  13. Minimally Invasive Alveolar Ridge Preservation Utilizing an In Situ Hardening β-Tricalcium Phosphate Bone Substitute: A Multicenter Case Series

    Directory of Open Access Journals (Sweden)

    Minas D. Leventis

    2016-01-01

    Full Text Available Ridge preservation measures, which include the filling of extraction sockets with bone substitutes, have been shown to reduce ridge resorption, while methods that do not require primary soft tissue closure minimize patient morbidity and decrease surgical time and cost. In a case series of 10 patients requiring single extraction, in situ hardening beta-tricalcium phosphate (β-TCP granules coated with poly(lactic-co-glycolic acid (PLGA were utilized as a grafting material that does not necessitate primary wound closure. After 4 months, clinical observations revealed excellent soft tissue healing without loss of attached gingiva in all cases. At reentry for implant placement, bone core biopsies were obtained and primary implant stability was measured by final seating torque and resonance frequency analysis. Histological and histomorphometrical analysis revealed pronounced bone regeneration (24.4 ± 7.9% new bone in parallel to the resorption of the grafting material (12.9 ± 7.7% graft material while high levels of primary implant stability were recorded. Within the limits of this case series, the results suggest that β-TCP coated with polylactide can support new bone formation at postextraction sockets, while the properties of the material improve the handling and produce a stable and porous bone substitute scaffold in situ, facilitating the application of noninvasive surgical techniques.

  14. Effects of different numbers of mini-dental implants on alveolar ridge strain distribution under mandibular implant-retained overdentures.

    Science.gov (United States)

    Warin, Pongsakorn; Rungsiyakull, Pimduen; Rungsiyakull, Chaiy; Khongkhunthian, Pathawee

    2018-01-01

    To investigate the strains around mini-dental implants (MDIs) and retromolar edentulous areas when using different numbers of MDIs in order to retain mandibular overdentures. Four different prosthetic situations were fabricated on an edentulous mandibular model including a complete denture (CD), and three overdentures, retained by four, three or two MDIs in the interforaminal region with retentive attachments. A static load of 200N was applied on the posterior teeth of the dentures under bilateral or unilateral loading conditions. The strains at the mesial and distal of the MDIs and the retromolar edentulous ridges were measured using twelve strain gauges. Comparisons of the mean microstrains among all strain gauges in all situations were analyzed. The strain distribution determined during bilateral loading experienced a symmetrical distribution; while during unilateral loading, the recorded strains tended to change from compressive strains on the loaded side to tensile strains. Overall, the number of MDIs was found to be passively correlated to the generated compressive strain. The highest strains were recorded in the four MDIs followed by three, two MDIs retained overdenture and CD situations, respectively. The highest strain was found around the terminal MDI. The use of a low number of MDIs tends to produce low strain values in the retromolar denture-bearing area and around the terminal MDIs during posterior loadings. However, when using a high number of MDIs, the overdenture tends to have more stability during function. Copyright © 2017 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  15. Bone morphogenetic protein-2 loaded poly(D,L-lactide-co-glycolide microspheres enhance osteogenic potential of gelatin/hydroxyapatite/β-tricalcium phosphate cryogel composite for alveolar ridge augmentation

    Directory of Open Access Journals (Sweden)

    Hao-Chieh Chang

    2017-12-01

    Full Text Available Background/Purpose: Sufficient bony support is essential to ensure the success of dental implant osseointegration. However, the reconstruction of vertical ridge deficiencies is still a major challenge for dental implants. This study introduced a novel treatment strategy by infusing poly(D,L-lactide-co-glycolide (PLGA microspheres encapsulating bone morphogenetic protein-2 (BMP-2 within a gelatin/hydroxyapatite/β-tricalcium phosphate (gelatin/HA/β-TCP cryogel composite to facilitate supra-alveolar ridge augmentation. Methods: The gelatin scaffold was crosslinked using cryogel technique, and HA/β-TCP particles were mechanically entrapped to form the gelatin/HA/β-TCP composite. Co-axial electrohydrodynamic atomization technology was used to fabricate PLGA microspheres encapsulating BMP-2. The composites of gelatin/HA/β-TCP alone, with infusion of BMP-2 solution (BMPi or microspheres (BMPm, were fixed on rat mandibles using a titanium mini-implant for 4 weeks, and the therapeutic efficiency was evaluated by micro-computed tomography, bone fluorochrome, and histology. Results: The gelatin/HA/β-TCP composite was homogenously porous, and BMP-2 was sustained release from the microspheres without initial burst release. Ridge augmentation was noted in all specimens treated with the gelatin/HA/β-TCP composite, and greater bone deposition ratio were noted in Groups BMPi and BMPm. Compared with Group BMPi, specimens in Group BMPm showed significantly greater early osteogenesis and evident osseointegration in the supra-alveolar level. Conclusion: BMP-2 loaded PLGA microspheres effectively promoted osteogenic potential of the gelatin/HA/β-TCP composite and facilitated supra-alveolar ridge augmentation in vivo. Keywords: bone morphogenetic protein-2, bone regeneration, dental implant, tissue engineering, tissue scaffolds

  16. Three dimensional changes in maxillary complete dentures immersed in water for seven days after polymerization

    Directory of Open Access Journals (Sweden)

    Shinsuke Sadamori

    2008-03-01

    Full Text Available The purpose of this study was to investigate the three dimensional changes in the fitting surface and artificial teeth of maxillary complete dentures which were fabricated using two different polymerizing processes: heat polymerization (HP and microwave polymerization (MP, after immersion in water for seven days. The amount of distortion in the molar region of the alveolar ridge was significantly different between HP and MP. However, the overall distortion of the dentures polymerized using both methods was similar. The distortion due to immersion in water for seven days compensated for the polymerization distortion, but the amount of distortion was very slight.

  17. Management of compromised anterior maxillary edentulous arch with symphyseal bone graft

    Directory of Open Access Journals (Sweden)

    Sunil Kumar Mishra

    2018-01-01

    Full Text Available Achieving optimal aesthetics, function and phonetics with implant-supported restorations depends largely on the amount of bone present at the site where implant has to be placed. Sometimes, patient reports with compromised conditions which makes the implant placement difficult. Today, reconstruction procedures such as autogenous bone graft and guided bone regeneration make the implant placement possible in different ridge deficient cases. This case report describes step-by-step procedure of restoring the missing maxillary right central incisor with implant-supported prostheses. In missing left central incisor region, the alveolar bony defect was corrected by autogenous bone graft obtained from symphysis region, for restoration with implant prostheses.

  18. Radiodense concretions in maxillary sinus aspergillosis: pathogenesis and the role of CT densitometry

    International Nuclear Information System (INIS)

    Lenglinger, F.X.; Krennmair, G.; Mueller-Schelken, H.; Artmann, W.

    1996-01-01

    The purpose of this study was to investigate by CT the origin of radiodense maxillary sinus concretions and whether CT densitometry is effective in the prediction of maxillary sinus aspergillosis and in the differentiation of the origin of these concretions. In a prospective study in 21 patients with radiodense maxillary sinus concretions detected by radiography, a preoperative CT study of the paranasal sinuses and the concretions was undertaken. Additional scans of the upper alveolar ridge were also performed. Radiological findings were compared with clinical symptoms and with CT findings, especially CT densitometry of the sinus concretions and dental root-filling material. All patients underwent a functional Caldwell-Luc operation; histological and microbiological examinations were performed. Fifteen of the 21 patients (71.4%) with radiodense concretions had a histological and microbiological diagnosis of sinus aspergillosis. The sinus concretions had CT densities higher than 2000 HU (Housfield units) in 15 patients and lower than 2000 HU in 6. Fourteen of 15 patients (93.3%) with concretions ahving CT densities higher than 2000 HU had a postoperative diagnosis of maxillary sinus aspergillosis. The mean CT density of the sinus concretions in patients with maxillary sinus aspergillosis was 2868 HU (range 1870-3070 HU), and in patients without aspergiollosis was 778 HU (range 228-2644 HU). The mean CT density of the dental root-filling material was 2866 HU (range 2156-3070 HU). Paranasal sinus CT with CT densitometry of a sinus concretion has a higher accuracy than standard radiogrpahy and clinical findings in the prediction of maxillary sinus aspergillosis (93.3% vs 71.4%). CT densitometry helps to confirm the dental origin of maxillary sinus concretions and to explain a possible dental pathogenesis of maxillary sinus aspergillosis. (orig.)

  19. Randomised controlled clinical trial of augmentation of the alveolar ridge using recombinant human bone morphogenetic protein 2 with hydroxyapatite and bovine-derived xenografts: comparison of changes in volume.

    Science.gov (United States)

    Nam, J W; Khureltogtokh, S; Choi, H M; Lee, A R; Park, Y B; Kim, H J

    2017-10-01

    The aim of this randomised controlled clinical trial was to assess the early efficacy of bone morphogenetic protein-2 with hydroxyapatite granules (BMP-2/hydroxyapatite) on augmentation of the alveolar ridge, by comparing changes in volume with those associated with the use of an inorganic bovine-derived xenograft (BDX). We studied 20 patients who were divided into two groups using a table of random numbers, and BMP-2/hydroxyapatite and BDX were applied accordingly. Computed tomographic (CT) images and panoramic radiographs were obtained immediately after operation and four months later. CT images were reconstructed in three dimensions to measure volumetric changes, and linear measurements were made on panoramic images. The mean (SD) absorption rates for BMP-2/hydroxyapatite and BDX were 13.2 (8.8)% and 13.8 (20.5)%, respectively. While the mean value did not differ significantly between the two materials, the SD was higher in the BDX group than in the BMP-2/hydroxyapatite group. No clinically important complications occurred in either group. We conclude that both BMP-2/hydroxyapatite and BDX were effective in augmenting the alveolar ridge, but BMP-2/hydroxyapatite seemed to be more useful in complicated bone defects. Copyright © 2017 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  20. Stress Distribution Evaluation of the Periodontal Ligament in the Maxillary Canine for Retraction by Different Alveolar Corticotomy Techniques: A Three-dimensional Finite Element Analysis.

    Science.gov (United States)

    Pacheco, Ariel Adriano Reyes; Saga, Armando Yukio; de Lima, Key Fonseca; Paese, Victor Nissen; Tanaka, Orlando M

    2016-01-01

    By using the finite element method (FEM), this study aimed to evaluate the effect of different corticotomy formats on the distribution and magnitude of stress on the periodontal ligament (PDL) during retraction of the maxillary canine. A geometric model of the left hemi-jaw was created from computed tomography scan images of a dry human skull and loads were administered during distalization movement of the canine. Three trials were performed: (1) without corticotomy, (2) box-shaped corticotomy and perforations in the cortical bone of the canine (CVC) and (3) CVC and circular-shaped corticotomy in the cortical bone of the edentulous space of the first premolar. There was no difference in stress distribution among the different corticotomy formats. Different corticotomy formats used to accelerate orthodontic tooth movement did not affect stress distribution in the PDL during canine retraction. From a mechanical perspective, the present study showed that the stress distribution on the PDL during canine retraction was similar in all the corticotomy formats. When using the Andrews T2 bracket, the PDL presented the highest levels of stress in the middle third of the PDL, suggesting that the force was near the center of resistance. Also, as bone weakening by corticotomies did not influence stress distribution, the surgical procedure could be simplified to a less aggressive one, focusing more on inflammatory cellular stimulation than on bone resistance. A simpler surgical act could also be performed by most orthodontists in their practices, enhancing postoperative response and reducing patient costs.

  1. Predictive value of ridge dimensions on autologous bone graft resorption in staged maxillary sinus augmentation surgery using Cone-Beam CT.

    NARCIS (Netherlands)

    Klijn, R.J.; Beucken, J.J.J.P van den; Bronkhorst, E.M.; Berge, S.J.; Meijer, G.J.; Jansen, J.B.M.J.

    2012-01-01

    INTRODUCTION: No studies are available that provide predictive parameters regarding the expected amount of resorption after maxillary sinus augmentation surgery using autologous bone grafts. Therefore, the aim of this study was to determine parameters influencing the outcome of the bone graft

  2. Interdisciplinary approach to enhance the esthetics of maxillary anterior region using soft- and hard-tissue ridge augmentation in conjunction with a fixed partial prosthesis.

    Science.gov (United States)

    Khetarpal, Shaleen; Chouksey, Ajay; Bele, Anand; Vishnoi, Rahul

    2018-01-01

    Favorable esthetics is one of the most important treatment outcomes in dentistry, and to achieve this, interdisciplinary approaches are often required. Ridge deficiencies can be corrected for both, soft- and hard-tissue discrepancies. To overcome such defects, not only a variety of prosthetic options are at our disposal but also several periodontal plastic surgical techniques are available as well. Various techniques have been described and revised, over the year to correct ridge defects. For enhancing soft-tissue contours in the anterior region, the subepithelial connective tissue graft is the treatment of choice. A combination of alloplastic bone graft in adjunct to connective tissue graft optimizes ridge augmentation and minimizes defects. The present case report describes the use of vascular interpositional connective tissue graft in combination with alloplastic bone graft for correction of Seibert's Class III ridge deficiency followed by a fixed partial prosthesis to achieve a better esthetic outcome.

  3. Interdisciplinary approach to enhance the esthetics of maxillary anterior region using soft- and hard-tissue ridge augmentation in conjunction with a fixed partial prosthesis

    Directory of Open Access Journals (Sweden)

    Shaleen Khetarpal

    2018-01-01

    Full Text Available Favorable esthetics is one of the most important treatment outcomes in dentistry, and to achieve this, interdisciplinary approaches are often required. Ridge deficiencies can be corrected for both, soft- and hard-tissue discrepancies. To overcome such defects, not only a variety of prosthetic options are at our disposal but also several periodontal plastic surgical techniques are available as well. Various techniques have been described and revised, over the year to correct ridge defects. For enhancing soft-tissue contours in the anterior region, the subepithelial connective tissue graft is the treatment of choice. A combination of alloplastic bone graft in adjunct to connective tissue graft optimizes ridge augmentation and minimizes defects. The present case report describes the use of vascular interpositional connective tissue graft in combination with alloplastic bone graft for correction of Seibert's Class III ridge deficiency followed by a fixed partial prosthesis to achieve a better esthetic outcome.

  4. Periapical abscess of the maxillary teeth and its fistulizations: Multi ...

    African Journals Online (AJOL)

    Sherif A. Shama

    2012-12-14

    Dec 14, 2012 ... Two cases (10%) of fracture of the maxillary alveolar process complicating tri- als of previous ... Tooth decay is the most common chronic illness in the pediat- ... with resultant apical periodontitis, granuloma, abscess, and fi-.

  5. The potential of mangosteen (Garcinia mangostana peel extract, combined with demineralized freeze-dried bovine bone xenograft, to reduce ridge resorption and alveolar bone regeneration in preserving the tooth extraction socket

    Directory of Open Access Journals (Sweden)

    Utari Kresnoadi

    2017-01-01

    Conclusion: The induction of MPEs and DFBBX is effective in reducing inflammation, lowering osteoclasts, decreasing alveolar bone resorption, and also increasing BMP2 expression and alveolar bone regeneration.

  6. A 5-year comparison of marginal bone level following immediate loading of single-tooth implants placed in healed alveolar ridges and extraction sockets in the maxilla.

    Science.gov (United States)

    Berberi, Antoine N; Sabbagh, Joseph M; Aboushelib, Moustafa N; Noujeim, Ziad F; Salameh, Ziad A

    2014-01-01

    The aim of present investigation was to evaluate marginal bone level after 5-year follow-up of implants placed in healed ridges and fresh extraction sockets in maxilla with immediate loading protocol. Thirty-six patients in need of a single-tooth replacement in the anterior maxilla received 42 Astra Tech implants (Astra Tech Implant system™, Dentsply Implants, Mölndal, Sweden). Implants were placed either in healed ridges (group I) or immediately into fresh extraction sockets (group II). Implants were restored and placed into functional loading immediately by using a prefabricated abutment. Marginal bone level relative to the implant reference point was recorded at implant placement, crown cementation, 12, 36, and 60 months following loading using intra-oral radiographs. Measurements were made on the mesial and distal sides of each implant. Overall, two implants were lost from the group II, before final crown cementation: they were excluded from the study. The mean change in marginal bone loss (MBL) after implant placement was 0.26 ± 0.161 mm for 1 year, and 0.26 ± 0.171 mm for 3 years, and 0.21 ± 0.185 mm for 5 years in extraction sockets and was 0.26 ± 0.176 mm for 1 year and 0.21 ± 0.175 mm for 3 years, and 0.19 ± 0.172 mm for 5 years in healed ridges group. Significant reduction of marginal bone was more pronounced in implants inserted in healed ridges (P sockets (P sockets or healed ridges were similar. Functional loading technique by using prefabricated abutment placed during the surgery time seems to maintain marginal bone around implant in both healed and fresh extraction sites.

  7. A 5-year comparison of marginal bone level following immediate loading of single-tooth implants placed in healed alveolar ridges and extraction sockets in the maxilla

    Science.gov (United States)

    Berberi, Antoine N.; Sabbagh, Joseph M.; Aboushelib, Moustafa N.; Noujeim, Ziad F.; Salameh, Ziad A.

    2014-01-01

    Purpose: The aim of present investigation was to evaluate marginal bone level after 5-year follow-up of implants placed in healed ridges and fresh extraction sockets in maxilla with immediate loading protocol. Materials and Methods: Thirty-six patients in need of a single-tooth replacement in the anterior maxilla received 42 Astra Tech implants (Astra Tech Implant system™, Dentsply Implants, Mölndal, Sweden). Implants were placed either in healed ridges (group I) or immediately into fresh extraction sockets (group II). Implants were restored and placed into functional loading immediately by using a prefabricated abutment. Marginal bone level relative to the implant reference point was recorded at implant placement, crown cementation, 12, 36, and 60 months following loading using intra-oral radiographs. Measurements were made on the mesial and distal sides of each implant. Results: Overall, two implants were lost from the group II, before final crown cementation: they were excluded from the study. The mean change in marginal bone loss (MBL) after implant placement was 0.26 ± 0.161 mm for 1 year, and 0.26 ± 0.171 mm for 3 years, and 0.21 ± 0.185 mm for 5 years in extraction sockets and was 0.26 ± 0.176 mm for 1 year and 0.21 ± 0.175 mm for 3 years, and 0.19 ± 0.172 mm for 5 years in healed ridges group. Significant reduction of marginal bone was more pronounced in implants inserted in healed ridges (P prefabricated abutment placed during the surgery time seems to maintain marginal bone around implant in both healed and fresh extraction sites. PMID:24550840

  8. A 5- Year Comparison of Marginal Bone Level Following Immediate Loading of Single-Tooth Implants Placed in Healed Alveolar Ridges and Extraction Sockets in the Maxilla.

    Directory of Open Access Journals (Sweden)

    Antoine Nicolas Berberi

    2014-01-01

    Full Text Available AbstractPurpose: The aim of present investigation was to evaluate marginal bone level after 5-year follow-up of implants placed in healed ridges and fresh extraction sockets in maxilla with immediate loading protocol.Materials and Methods: Thirty-six patients in need of a single tooth replacement in the anterior maxilla received 42 Astra Tech implants (Astra Tech Implant system™, Dentsply Implants, Mölndal, Sweden. Implants were placed in healed ridges (group I or immediately into extraction sockets (group II. Implants were restored and placed into functional loading immediately by using a prefabricated abutment. Marginal bone level relative to the implant reference point was recorded at implant placement, crown cementation, 12, 36 and 60 months following loading using intra-oral radiographs. Measurements were made on the mesial and distal sides of each implantResults: Overall, two implants were lost from the group II, before final crown cementation: they were excluded from the study and all remaining implants osseointegrated successfully after 5 years of functional loading. The mean change in marginal bone loss after implant placement was 0.267±0.161 for one year, and 0.265±0.171 for three years and 0.213±0.185 for five years in extraction sockets and was 0.266±0.176 for one year and 0.219±0.175 for three years and 0.194±0.172 for five years in healed ridges group. Significant reduction of marginal bone loss was more pronounced in implants inserted in healed ridges (P

  9. A radiographic study of alveolar bone loss in Irish schoolchildren

    International Nuclear Information System (INIS)

    Buckley, L.A.

    1982-01-01

    Bitewing radiographs were used to assess evidence of alveolar bone loss in 1492 children in the age range 7-12 years. According to the method used in this study, alveolar bone loss was shown to occur in 1.7% of the children, and maxillary teeth were affected twice as frequently as mandibular teeth. (Author)

  10. Optimizing Maxillary Aesthetics of a Severe Compromised Tooth through Orthodontic Movement and Dental Implants

    Directory of Open Access Journals (Sweden)

    Rafael Scaf de Molon

    2014-01-01

    Full Text Available Treatment of severe compromised tooth in the maxillary anterior area still poses great challenge to the clinicians. Several treatment modalities have been proposed to restore the function and aesthetics in teeth with advanced periodontal disease. The present study aims to report a case of traumatic injury of a left-maxillary central incisor with ridge preservation, orthodontic movement, and implant therapy. A 45-year-old woman underwent the proposed treatment for her left central incisor: basic periodontal therapy, xenogenous bone graft, and guided bone regeneration (GBR. Six months after the graft procedure, orthodontic movement by means of alignment and leveling was made and a coronal displacement of the gingival margin and vertical bone apposition could be observed after 13 months of active movement. Afterwards, a dental implant was placed followed by a connective tissue graft and immediate provisionalization of the crown. In conclusion, orthodontic movement was effective to improve the gingival tissue and alveolar bone prior to implant placement favoring the aesthetic results. Six years postoperatively, the results revealed height and width alveolar bone gain indicating that the treatment proposed was able to restore all the functional and aesthetic parameters.

  11. Single-staged vs. two-staged implant placement using bone ring technique in vertically deficient alveolar ridges - Part 1: histomorphometric and micro-CT analysis.

    Science.gov (United States)

    Nakahara, Ken; Haga-Tsujimura, Maiko; Sawada, Kosaku; Kobayashi, Eizaburo; Mottini, Matthias; Schaller, Benoit; Saulacic, Nikola

    2016-11-01

    Simultaneous implant placement with bone grafting shortens the overall treatment period, but might lead to the peri-implant bone loss or even implant failure. The aim of this study was to compare the single-staged to two-staged implant placement using the bone ring technique. Four standardized alveolar bone defects were made in the mandibles of nine dogs. Dental implants (Straumann BL ® , Basel, Switzerland) were inserted simultaneously with bone ring technique in test group and after 6 months of healing period in control group. Animals of both groups were euthanized at 3 and 6 months of osseointegration period. The harvested samples were analyzed by means of histology and micro-CT. The amount of residual bone decreased while the amount of new bone increased up to 9 months of healing period. All morphometric parameters remained stable between 3 and 6 months of osseointegration period within groups. Per a given time point, median area of residual bone graft was higher in test group and area of new bone in control group. The volume of bone ring was greater in test than in control group, reaching the significance at 6 months of osseointegration period (P = 0.002). In the present type of bone defect, single-staged implant placement may be potentially useful to shorten an overall treatment period. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  12. Radiolabeled microsphere measurements of alveolar bone blood flow in dogs

    International Nuclear Information System (INIS)

    Kaplan, M.L.; Jeffcoat, M.K.; Goldhaber, P.

    1978-01-01

    Radiolabeled microspheres were injected into the left cardiac ventricle in healthy adult dogs to quantify blood in maxillary and mandibular alveolar bone. Heart rate, arterial blood pressure and pulse contour were monitored throughout each experiment. Blood flow in maxillary alveolar bone was more than 30 % greater (p<.001) than in mandibular alveolar bone. Alveolar bone blood flow (mean +- S.D.) measured as ml/min per gram was 0.12 +- .02 in the maxilla compared to 0.09 +- .02 in the mandible. The cardiovascular parameters monitored were constant immediately prior to the injection of microspheres and remained unchanged during and following injection. It is possible that radiolabeled microspheres can be used to quantify the circulatory changes in alveolar bone during the development of destructive periodontal disease in dogs. (author)

  13. Evaluation of the implantation position of mini-screws for orthodontic treatment in the maxillary molar area by a micro CT

    International Nuclear Information System (INIS)

    Ishii, Takenobu; Nojima, Kunihiko; Nishii, Yasushi; Takaki, Takashi; Yamaguchi, Hideharu

    2004-01-01

    The interalveolar septum between the upper first molar and the second premolar of the separated human maxillary bone was three-dimensionally observed by micro CT to evaluate the appropriate mini-screw type implant placement position by considering the relationship between the tooth roots and the maxillary sinus. After taking micro CTs of 5 human maxillary bones, horizontally sectioned images of the interalveolar septum area 2, 4, 6, 8, 10, and 12 mm deep from the crest of the alveolar ridge were reconstructed by three-dimensional reconstruction software. The bucco-lingual and mesio-distal lengths and area in each sectioned interalveolar septum were measured using digital image measurement software. Using the results, the interalveolar septum area between the upper first molar and the second premolar approximately 6-8 mm deep from the alveolar crest in the tooth root apical direction was determined to be the safest position for mini-screw implantation. Furthermore, lateral implantation from the palatal side was deduced to be the safest approach. (author)

  14. Maxillary hematocele

    International Nuclear Information System (INIS)

    Inaba, Tsuyoshi; Fujimura, Takeyuki; Udaka, Tsuyoshi; Siomori, Teruo; Kadokawa, Yohei; Suzuki, Hideaki

    2007-01-01

    Hematocele is a benign hemorrhagic pseudotumor that preferably arises in the sinonasal tract, particularly in the maxillary sinus. The occurrence of maxillary hematocele has sporadically been documented, but its nature is not dearly understood. We herein report four cases of maxillary hematocele. The patients were 3 men and one woman, 30-62 years of age with an average of 49.8 years. Major symptoms were nasal obstruction (2 cases), nasal bleeding (2 cases), and toothache (1 case). Computed tomography demonstrated well-defined expansive soft tissue shadows with bone erosion. The lesions showed intermingled high/intermediate/low intensity in both T1- and T2-weighted magnetic resonance imaging. Endoscopic sinus surgery was performed in 3 cases, and the other patient underwent Caldwell-Luc procedure. Surgical specimens microscopically exhibited inflammatory changes with hematoma and fibrin deposition. The postoperative clinical course was uneventful in all cases, and all the patients are currently free from disease 4-25 months after surgery. Clinical, histopathological and radiological characteristics of maxillary hematocele are reviewed. (author)

  15. Evaluación clínica y radiográfica de la técnica de distracción osteogénica en la reconstrucción de rebordes alveolares atróficos en la región anterior del maxilar superior A clinical and radiographic evaluation of the distraction osteogenesis technique for the reconstruction of atrophic alveolar ridges in the anterior region of the upper maxilla

    Directory of Open Access Journals (Sweden)

    M.E. Allais de Maurette

    2005-06-01

    Full Text Available Este estudio tiene como objetivo evaluar clínica y radiográficamente la técnica de distracción osteogénica alveolar en la región anterior del maxilar superior y las posibles complicaciones que pueden aparecer durante el tratamiento. Fueron evaluados 15 pacientes, sometidos a reconstrucción alveolar del maxilar superior en la región anterior con distracción osteogénica, usando un distractor yuxtaóseo. Del total de 15 pacientes encontramos que 13 pacientes (86,6% obtuvieron un éxito total de la técnica, obteniendo una ganancia ósea real media de 7,04 mm; en 1 paciente (6,66% fue parcial (2,62 mm y en 1 paciente (6,66% se evidenció un fracaso en la técnica, al alcanzar solo 0,76 mm debido a problemas en la activación del distractor. En cuanto a las complicaciones surgidas durante el tratamiento fueron divididas en complicaciones menores, toda aquella que no interfirió en el éxito del tratamiento, y que estuvieron presentes en 8 pacientes (53,33%, y complicaciones mayores aquellas que no permitieron la rehabilitación con implantes, y que fue encontrado solo en 1 paciente (6,66%. La técnica de distracción osteogénica alveolar, demostró ser eficaz en la reconstrucción de rebordes alveolares atróficos con un éxito de 93,33%, presentado pequeñas complicaciones que pueden ser solventadas por medio de un seguimiento por parte del profesional.This study evaluates clinically and radiographically the distraction osteogenesis technique for the reconstruction of atrophic alveolar ridges in the anterior maxilla region, and the possible complications that arise during treatment. Fifteen patients were evaluated, clinically and radiographically, that had been treated with alveolar distraction osteogenesis in the anterior region, using a juxta-osseous distractor. In 13 patients (86.6% the technique was completely successful, there being an effective bone gain of 7,04 mm. In 1 patient (6.66% this was partial (2.62 mm and in 1 patient (6

  16. Oral health-related quality of life changes after placement of immediately loaded single implants in healed alveolar ridges or extraction sockets: a 5-year prospective follow-up study.

    Science.gov (United States)

    Raes, Stefanie; Raes, Filiep; Cooper, Lyndon; Giner Tarrida, Luis; Vervaeke, Stijn; Cosyn, Jan; De Bruyn, Hugo

    2017-06-01

    The impact of single implants on oral health-related quality of life (OHRQoL) is scarcely investigated, especially when combined with immediate placement and loading in extraction sockets. The aim was to describe prospectively the changes of OHRQoL with single implants placed in the esthetic zone in healed ridges or in extraction sockets after 5 years. Ninety-six patients, enrolled at three clinical centers, received 102 single implants placed in a healed ridge (n = 54 implants/50 patients) or in extraction sockets (n = 48 implants/46 patients). Implants were immediately provisionalized, and permanent crowns were cemented after 12 weeks. Oral health impact profile questionnaires (OHIP-14) were completed before surgery, after 1 (provisional crown), 6 (permanent crown), 12 and 60 months, respectively. The overall OHIP-14 score pertains to seven domains with two items each and was assessed on a Likert scale of 0-4 (0 = never and 4 = very often). The evolution of the total OHIP-14 score and changes within all OHIP domains over time and between groups were assessed with a linear mixed-effect model analysis. After 5 years, overall implant survival was 98%. The total OHIP-14 score for both groups combined decreased from 0.50 at baseline to 0.17 at 6 months (P < 0.001), indicative of improvement. For both groups, this remained stable up to 5 years (P = 0.41). However, after 5 years, the total OHIP-14 score revealed a statistically significantly higher improvement in the healed group compared with the extraction group (P = 0.027). Missing a single tooth in the maxillary esthetic zone leads to limited OHRQoL problems as reflected by a low overall OHIP score. However, OHRQoL improves less in the extraction group, reflecting that replacing a missing tooth is perceived as more beneficial than replacing a present tooth. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  17. Prevalence and location of the posterior superior alveolar artery using cone-beam computed tomography

    Energy Technology Data Exchange (ETDEWEB)

    Tehranchi, Maryam; Taleghani, Ferial; Shahab, Shahriar [Faculty of Dentistry, Shahed University, Tehran (Iran, Islamic Republic of); Nouri, Arash [Nouri' s Dental Clinic, Tehran (Iran, Islamic Republic of)

    2017-03-15

    Insufficient knowledge of the anatomy of the maxillary sinuses prior to sinus graft surgery may lead to perioperative or postoperative complications. This study sought to characterize the position of the posterior superior alveolar artery (PSAA) within the maxillary sinuses using cone-beam computed tomography (CBCT). A total of 300 patients with edentulous posterior maxillae, including 138 females and 162 males with an age range of 33-86 years, who presented to a radiology clinic between 2013 and 2015 were enrolled in this retrospective cross-sectional study. The distance from the inferior border of the PSAA to the alveolar crest according to the residual ridge classification by Lekholm and Zarb, the distance from the PSAA to the nasal septum and zygomatic arch, and the diameter and position of the PSAA were all assessed on patients' CBCT scans. The data were analyzed using the Mann-Whitney test and the t-test. The PSAA was detected on the CBCT scans of 87% of the patients; it was located beneath the sinus membrane in 47% of cases and was intraosseous in 47% of cases. The diameter of the artery was between 1 and 2 mm in most patients (72%). The mean diameter of the artery was 1.29±0.39 mm, and the mean distances from the PSAA to the zygomatic arch, nasal septum, and alveolar crest were 22.59±4.89 mm, 26.51±3.52 mm, and 16.7±3.96 mm, respectively. The likelihood of detecting the PSAA on CBCT scans is high; its location is intraosseous or beneath the sinus membrane in most patients. Determining the exact location of the PSAA on CBCT scans preoperatively can help prevent it from being damaged during surgery.

  18. Space closure in the maxillary posterior area through the maxillary sinus.

    Science.gov (United States)

    Park, Jae Hyun; Tai, Kiyoshi; Kanao, Akira; Takagi, Masato

    2014-01-01

    A common dilemma in adult orthodontic treatment is deciding how best to treat missing posterior teeth. One treatment option is to orthodontically close the space. But closure can be difficult, especially if the open space is in the maxillary posterior area, because tooth movement through the maxillary sinus is limited. The increased difficulty of moving teeth in the maxillary sinus is similar to moving a tooth in the atrophic posterior mandibular ridge. If space closure is selected as a treatment method, proper mechanics and light forces should be applied. In this article, we report movement of teeth through the maxillary sinus and discuss various implications related to orthodontic treatment in the maxillary sinus. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  19. Treatment of sharp mandibular alveolar process with hybrid prosthesis

    OpenAIRE

    Sukaedi, Sukaedi; Djulaeha, Eha

    2010-01-01

    Background: Losing posterior teeth for a long time would occasionally lead to the sharpening of alveolar process. The removable partial denture usually have problems when used during mastication, because of the pressure on the mucosa under the alveolar ridge. Purpose: The purpose of this case report was to manage patients with sharp mandibular alveolar process by wearing hybrid prosthesis with extra coronal precision attachment retention and soft liner on the surface base beneath the removabl...

  20. Maxillary obturator

    Directory of Open Access Journals (Sweden)

    Aruna Jawahirlal Bhandari

    2017-01-01

    Full Text Available Defects in the maxillary jaw can be congenital, developmental, acquired, traumatic or surgical involving the oral cavity and related anatomic structure. Absence or loss of some or all of the soft palate and / or hard palate results in insufficient structure or altered function of the remaining tissues. Defects can cause disruption of articulation and airflow during speech production and also nasal reflux during deglutition. Patients after surgical resection have altered anatomy due to scaring, tissue contracture, lack of bony support and tissue edema. These patients have problem of regurgitation of water and food through nose and difficulty in speech. These changes require the fabrication of prosthesis and also sometimes repeated prosthesis adjustments to confirm to the soft tissue changes. To prevent this and to help the patient in deglutition and speech defects must be restored with prosthesis. In such situation an obturator is designed to close the opening between the residual hard and / or soft palate and the pharynx. The prosthesis provided for these patients are called as obturators. An obturator is a prosthesis which is fabricated for the patients with the palatal defects in the form of cleft lip and palate, oroantral fistula or surgical resection after removable of pathology like tumor or cancer. This review article will highlight on the Prosthetic Rehabilitation of the maxillary defects and the types of obturators.

  1. Temporary Blindness after Inferior Alveolar Nerve Block.

    Science.gov (United States)

    Barodiya, Animesh; Thukral, Rishi; Agrawal, Shaila Mahendra; Rai, Anshul; Singh, Siddharth

    2017-03-01

    Inferior Alveolar Nerve Block (IANB) anaesthesia is one of the common procedures in dental clinic. This procedure is safe, but complications may still occur. Ocular complications such as diplopia, loss of vision, or ophthalmoplegia are extremely rare. This case report explains an event where due to individual anatomic variation of the sympathetic vasoconstrictor nerve and maxillary and middle meningeal arteries, intravascular administration of anaesthetic agent caused unusual ocular signs and symptoms such as temporary blindness.

  2. Maxillary Tuberosity Reconstruction with Transport Distraction Osteogenesis

    Directory of Open Access Journals (Sweden)

    F. Ugurlu

    2012-01-01

    Full Text Available Severe bone loss due to pathology in the maxillary tuberosity region is a challenging problem both surgically and prosthetically. Large bone grafts have a poor survival rate due to the delicate bony architecture in this area and presence of the maxillary sinus. Our case presentation describes a new technique for reconstructing severe bony defect in the maxillary tuberosity with horizontal distraction osteogenesis in a 45-year-old man. A 4×6×3cm cyst was discovered in the left maxillary molar region and enucleated. Three months postoperatively, the area had a severe bone defect extending to the zygomatic buttress superiorly and hamular notch posteriorly. Three months later, a bone segment including the right upper second premolar was osteotomised and distracted horizontally. The bone segment was distracted 15 mm distally. After consolidation, implants were placed when the distractor was removed. A fixed denture was loaded over the implants after 3 months. Complete alveolar bone loss extending to the cranial base can be reconstructed with transport distraction osteogenesis. Distalisation of the alveolar bone segment adjacent to the bony defect is an easy method for reconstructing such severe defects.

  3. Contemporary Approaches in the Repair of Alveolar Clefts

    Directory of Open Access Journals (Sweden)

    Ufuk Tatli

    2014-08-01

    Full Text Available Cleft lip and palate is one of the most common craniofacial anomalies. The repair of the alveolar clefts is an important part of the treatment for patients with cleft lip and palate. The treatment concepts of alveolar bone grafting are still controversial. The corresponding controversial issues are; timing of alveolar bone grafting, graft materials, and timing of the orthodontic expansion. In the present article, aforementioned controversial issues and contemporary treatment modalities of the maxillary alveolar clefts were reviewed in the light of current literature. In conclusion, the most suitable time for alveolar bone grafting is mixed dentition period. Grafting procedure may be performed in the early or late phases of this period depending on some clinical features. Adjunct orthodontic expansion procedures should be performed before and/or after grafting depending on the patient's current features. [Archives Medical Review Journal 2014; 23(4.000: 563-574

  4. Influence of local tetracycline on the microbiota of alveolar osteitis in rats

    OpenAIRE

    Bosco, Joseane Maria Dias; Oliveira, Sérgio Ricardo de; Bosco, Álvaro Francisco; Schweitzer, Christiane Marie; Jardim Júnior, Elerson Gaetti

    2008-01-01

    The aim of the present study was to evaluate the effects of local tetracycline on the occurrence of alveolar osteitis in rats, and on the microbiota associated to this infection. Forty Wistar rats were randomly assigned to 4 groups (n=10): I - the rats had the maxillary right incisor extracted and the alveolar wound did not receive any treatment; II - adrenaline and Ringer-PRAS were introduced into the alveolar wound; III - the alveolar wound was irrigated with sterile saline; and IV - the al...

  5. Alveolar distraction osteogenesis: revive and restore the native bone.

    Science.gov (United States)

    Sant, Sumedha; Jagtap, Amit

    2009-12-01

    In prosthodontics, knife-edge bony alveolar ridges can cause a problem in their rehabilitation. The distraction osteogenesis process raises the medullary component of the alveolus, allowing the labial plate of the existing natural bone to be displaced. This process involves mobilization, transport, and fixation of a healthy segment of bone adjacent to the deficient site. It entails use of the gradual controlled displacement of surgically created fractures, which results in simultaneous expansion of soft tissue and bone volume. A mechanical device, the alveolar distraction device, is used for this purpose. This modality of treatment can be used in implant dentistry cases for rehabilitation of resorbed ridges. The objective of this overview is to explain this procedure wherein the alveolar housing, including the osseous and soft-tissue components, is enlarged in a single, simultaneous process, which makes creation of an appropriate alveolar morphology possible.

  6. Nostril Base Augmentation Effect of Alveolar Bone Graft

    Directory of Open Access Journals (Sweden)

    Woojin Lee

    2013-09-01

    Full Text Available Background The aims of alveolar bone grafting are closure of the fistula, stabilization ofthe maxillary arch, support for the roots of the teeth adjacent to the cleft on each side.We observed nostril base augmentation in patients with alveolar clefts after alveolar bonegrafting. The purpose of this study was to evaluate the nostril base augmentation effect ofsecondary alveolar bone grafting in patients with unilateral alveolar cleft.Methods Records of 15 children with alveolar clefts who underwent secondary alveolar bonegrafting with autogenous iliac cancellous bone between March of 2011 and May of 2012 werereviewed. Preoperative and postoperative worm’s-eye view photographs and reconstructedthree-dimensional computed tomography (CT scans were used for photogrammetry. Thedepression of the nostril base and thickness of the philtrum on the cleft side were measuredin comparison to the normal side. The depression of the cleft side pyriform aperture wasmeasured in comparison to the normal side on reconstructed three-dimensional CT.Results Significant changes were seen in the nostril base (P=0.005, the philtrum length(P=0.013, and the angle (P=0.006. The CT measurements showed significant changes in thepyriform aperture (P<0.001 and the angle (P<0.001.Conclusions An alveolar bone graft not only fills the gap in the alveolar process but alsoaugments the nostril base after surgery. In this study, only an alveolar bone graft was performedto prevent bias from other procedures. Nostril base augmentation can be achieved byperforming alveolar bone grafts in children, in whom invasive methods are not advised.

  7. DIRECT USAGE OF MINISCREW ANCHORAGE TO INTRUDE OVERERUPTED MAXILLARY POSTERIOR TEETH BEFORE PROSTHODONTIC PREPARATION:A CASE REPORT

    Directory of Open Access Journals (Sweden)

    Yasemin Bahar Acar

    2016-01-01

    Full Text Available Overeruption of maxillary molars due loss of opposing teeth creates occlusal and functional interferences. Before reconstruction can be initiated, intrusion of overerupted molars becomes essential. This report illustrates treatment of overerupted maxillary premolar and molar via direct use of miniscrew anchorage. A 24-year old female had lost first and second left mandibular molars due to pulpal necrotizing agents, resulting with a large alveolar bone defect and overerupted maxillary premolar and molar. She had a history of unsuccessful alveolar distraction of mandibular left premolars to increase the alveolar bone height prior to implant placement. Patient was satisfied with her smile and refused comprehensive orthodontic treatment. Maxillary premolar and molar were intruded segmentally for 4mm in 8 months, using a combination of a mini-implant and partialfixed edgewise appliances. Biological responses of teeth and surrounding bony structures to intrusion appeared normal and acceptable in radiographic and clinical examination.

  8. Alternatives to Autologous Bone Graft in Alveolar Cleft Reconstruction: The State of Alveolar Tissue Engineering.

    Science.gov (United States)

    Liang, Fan; Leland, Hyuma; Jedrzejewski, Breanna; Auslander, Allyn; Maniskas, Seija; Swanson, Jordan; Urata, Mark; Hammoudeh, Jeffrey; Magee, William

    2018-05-01

    Alveolar cleft reconstruction has historically relied on autologous iliac crest bone grafting (ICBG), but donor site morbidity, pain, and prolonged hospitalization have prompted the search for bone graft substitutes. The authors evaluated bone graft substitutes with the highest levels of evidence, and highlight the products that show promise in alveolar cleft repair and in maxillary augmentation. This comprehensive review guides the craniofacial surgeon toward safe and informed utilization of biomaterials in the alveolar cleft.A literature search was performed to identify in vitro human studies that fulfilled the following criteria: Level I or Level II of evidence, ≥30 subjects, and a direct comparison between a autologous bone graft and a bone graft substitute. A second literature search was performed that captured all studies, regardless of level of evidence, which evaluated bone graft substitutes for alveolar cleft repair or alveolar augmentation for dental implants. Adverse events for each of these products were tabulated as well.Sixteen studies featuring 6 bone graft substitutes: hydroxyapatite, demineralized bone matrix (DBM), β-tricalcium phosphate (TCP), calcium phosphate, recombinant human bone morphogenic protein-2 (rhBMP-2), and rhBMP7 fit the inclusion criteria for the first search. Through our second search, the authors found that DBM, TCP, rhBMP-2, and rhBMP7 have been studied most extensively in the alveolar cleft literature, though frequently in studies using less rigorous methodology (Level III evidence or below). rhBMP-2 was the best studied and showed comparable efficacy to ICBG in terms of volume of bone regeneration, bone density, and capacity to accommodate tooth eruption within the graft site. Pricing for products ranged from $290 to $3110 per 5 mL.The balance between innovation and safety is a complex process requiring constant vigilance and evaluation. Here, the authors profile several bone graft substitutes that demonstrate the most

  9. Clinical management of highly resorbed mandibular ridge without fibrous tissue

    Directory of Open Access Journals (Sweden)

    Veeramalai N Devaki

    2012-01-01

    Full Text Available Alveolar ridge atrophy poses a clinical challenge toward the fabrication of successful prosthesis. Resorption of mandibular denture bearing areas results in unstable non-retentive dentures associated with pain and discomfort. This article describes rehabilitation procedure of a patient with resorbed ridge with maximal areas of coverage to improve support and neutral zone arrangement of teeth to improve stability of denture.

  10. Maxillary Sinus Floor Augmentation

    DEFF Research Database (Denmark)

    Starch-Jensen, Thomas; Jensen, Janek Dalsgaard

    2017-01-01

    , radiological and histomorphometric outcome as well as complications are presented after maxillary sinus floor augmentation applying the lateral window technique with a graft material, maxillary sinus membrane elevation without a graft material and osteotome-mediated sinus floor elevation with or without...

  11. Odontogenic maxillary sinusitis diagnosed using conebeam x-ray CT

    International Nuclear Information System (INIS)

    Sato, Kiminori

    2007-01-01

    We evaluated the usefulness of conebeam x-ray CT in the diagnosis of odontogenic maxillary sinusitis in 21 patients. Among teeth causing odontogenic maxillary sinusitis, 95% had apical lesions after root canal treatment. Most root canals were filled with filling materials incompletely. Apical lesions in inappropriately treated teeth thus caused odontogenic maxillary sinusitis. Conebeam CT involves 3-dimensional isotropic voxel image date in up to 512 frames for transaxial, coronal, and sagittal planes, so resolution in imaging on the body axis was especially high. Multiplanar reconstruction and volume rendering images at any optional plane could be obtained without interpolation. The relationship between causative teeth and the maxillary sinus could be observed and measured, and odontogenic maxillary sinusitis accurately diagnosed. In addition to the accurate diagnosis of apical lesions, maxilla, and maxillary sinus, periodontal ligament space, lamina dura, pulp cavity, root canal, canal-treated root, apical periodontitis, alveolar ostitis, marginal periodontitis of causative teeth could be observed. Metal artifacts were minimized, making conebeam CT useful in the diagnosis of periodontal tissue and causative teeth, including root-canal-treated and crown-restored teeth. (author)

  12. Multidisciplinary Management of An Unusual Isolated Alveolar Bone Infection- A Rare Case Report

    OpenAIRE

    K, Pimpale Sandeep; B, Dixit Mala; S, Kulkarni Rahul; M, Ramugade Manoj

    2015-01-01

    Restoration of proximal defect of tooth is of paramount importance as its improper restoration usually results in fracture of the restoration or deteriorated periodontal health. The article reports a case with a discreet mass of alveolar bone necrosis closed to the overhanged amalgam restoration in the proximal box of the maxillary molar. As a result of this improper proximal restoration it led to deep periodontal pocket and subsequent alveolar bone necrosis which was managed successfully wit...

  13. Maxillary Chronic Osteomyelitis Caused by Domestic Violence: A Diagnostic Challenge

    Science.gov (United States)

    Oliveira, Tamyris Inácio; de Carli, Marina Lara; Ribeiro Junior, Noé Vital; Pereira, Alessandro Antônio Costa; Tatakis, Dimitris N.; Hanemann, João Adolfo Costa

    2014-01-01

    Maxillary osteomyelitis is a rare condition defined as inflammation of the bone primarily caused by odontogenic bacteria, with trauma being the second leading cause. The present report documents a rare case of maxillary osteomyelitis in a 38-year-old female who was the victim of domestic violence approximately a year prior to presentation. Intraoral examination revealed a lesion appearing as exposed bony sequestrum, with significant destruction of gingiva and alveolar mucosa in the maxillary right quadrant, accompanied by significant pain, local edema, and continued purulence. Teeth numbers 11, 12, 13, 14, and 15 were mobile, not responsive to percussion, and nonvital. Treatment included antibiotic therapy for seven days followed by total enucleation of the necrotic bone tissue and extraction of the involved teeth. Microscopic findings confirmed the clinical diagnosis of chronic suppurative osteomyelitis. Six months postoperatively, the treated area presented complete healing and there was no sign of recurrence of the lesion. PMID:25610667

  14. Maxillary Chronic Osteomyelitis Caused by Domestic Violence: A Diagnostic Challenge

    Directory of Open Access Journals (Sweden)

    Tamyris Inácio Oliveira

    2014-01-01

    Full Text Available Maxillary osteomyelitis is a rare condition defined as inflammation of the bone primarily caused by odontogenic bacteria, with trauma being the second leading cause. The present report documents a rare case of maxillary osteomyelitis in a 38-year-old female who was the victim of domestic violence approximately a year prior to presentation. Intraoral examination revealed a lesion appearing as exposed bony sequestrum, with significant destruction of gingiva and alveolar mucosa in the maxillary right quadrant, accompanied by significant pain, local edema, and continued purulence. Teeth numbers 11, 12, 13, 14, and 15 were mobile, not responsive to percussion, and nonvital. Treatment included antibiotic therapy for seven days followed by total enucleation of the necrotic bone tissue and extraction of the involved teeth. Microscopic findings confirmed the clinical diagnosis of chronic suppurative osteomyelitis. Six months postoperatively, the treated area presented complete healing and there was no sign of recurrence of the lesion.

  15. Classification of Alveolar Bone Destruction Patterns on Maxillary ...

    African Journals Online (AJOL)

    2017-09-14

    Sep 14, 2017 ... handicaps when assessing available periodontal treatment options for the prevention ...... without enamel matrix derivative in the treatment of periodontal intrabony ... in the compromised patient: Historical, current, and future.

  16. Alveolar process fractures in the permanent dentition. Part 1. Etiology and clinical characteristics. A retrospective analysis of 299 cases involving 815 teeth

    DEFF Research Database (Denmark)

    Andreasen, Jens Ove; Lauridsen, Eva

    2015-01-01

    were present in 73%. The most frequent location of the mandibular fracture line was along the periodontal ligament of the canine and in the sagittal suture between the two central maxillary incisors. This pattern appears to correlate with weak zones in the jaws. CONCLUSION: In conclusion, alveolar...... resistance gives in, namely the periodontal ligament and areas where the alveolar bone is thin....

  17. Maxillary reconstruction with a double-barrel osteocutaneous fibular flap and arteriovenous saphenous loop after a globe-sparing total maxillectomy-A Case Report.

    Science.gov (United States)

    Chen, Szu-Han; Hung, Kuo-Shu; Lee, Yao-Chou

    2017-05-01

    Maxillary reconstruction using titanium mesh or bone grafts can invite unwanted complications, such as graft resorption, infection, and mesh exposure, especially for patients who require postoperative radiotherapy. Here, we reported a 58-year-old male patient who was diagnosed with maxillary sinus squamous cell carcinoma. The patient received cancer ablation by a globe-sparing total maxillectomy and was immediately reconstructed with a double-barrel osteocutaneous fibular flap to simultaneously restore the alveolar ridge, orbital support, and oro-sinonasal separation. The short pedicle length inherent in the double-barrel design of the fibular flap and the depletion of healthy recipient vessels in the midface after cancer ablation were overcome by creating an arteriovenous saphenous loop in the neck region. Though there was venous congestion on postoperative day 2, the postoperative recovery was uneventful after the revision of the venous anastomoses. During the 6-months follow-up, the outcome was functionally and aesthetically satisfactory. We believe that the double-barrel fibular osteocutaneous flap, which avoids using titanium mesh and bone grafts, may be a viable reconstructive option in cancer patients with globe-sparing total maxillectomy defects, especially for those who require postoperative radiotherapy. © 2015 Wiley Periodicals, Inc. Microsurgery 37:334-338, 2017. © 2015 Wiley Periodicals, Inc.

  18. Total Maxillary Reconstruction With a Bi-Paddle Double-Barrel Osteocutaneous Fibular Flap and Arteriovenous Saphenous Loop After a Globe-Sparing Total Maxillectomy Due to Osteosarcoma.

    Science.gov (United States)

    Tseng, Wan-Ling; Chang, Tzu-Yen; Hung, Kuo-Shu; Chen, Szu-Han; Hsiao, Jenn-Ren; Lee, Yao-Chou

    2017-01-01

    The titanium mesh or bone graft is usually used for orbital support after a globe-sparing total maxillectomy. However, its use can invite complications, such as infection, exposure, and absorption, especially for patients who require adjuvant radiotherapy. Here, the authors present a patient who received total maxillary reconstruction with an osteocutaneous fibular flap. A 53-year-old man with the diagnosis of maxillary osteosarcoma received a globe-sparing total maxillectomy. A bi-paddle double-barrel osteocutaneous fibular flap was used for orbital support, alveolar ridge recreation, and oro-sino-nasal separation. The short pedicle length inherent in the double-barrel design of the fibular flap was overcome by creating an arteriovenous saphenous loop. The postoperative recovery was uneventful. During the 9 months follow-up, the patient was tumor-free and satisfied with his appearance, speech, and intake functions. Reconstruction with a bi-paddle double-barrel osteocutaneous fibular flap after a globe-sparing total maxillectomy can achieve satisfactory aesthetic and functional results.

  19. Proteinosis alveolar pulmonar Pulmonary alveolar proteinosis

    Directory of Open Access Journals (Sweden)

    Concepción Sánchez Infante

    2011-12-01

    Full Text Available La proteinosis alveolar pulmonar es una enfermedad respiratoria crónica, caracterizada por alteración en el metabolismo del surfactante, lo que determina su acumulación anormal en el espacio alveolar. Es una enfermedad extremadamente rara. Se han reportado solamente 500 casos en la literatura. Se describió por primera vez en 1958. Se presenta un caso de proteinosis alveolar pulmonar en un lactante de 2 meses, con desnutrición proteico energética, que ingresa por dificultad respiratoria e hipoxemia, y, con imágenes radiológicas de tipo retículo-nodulillar, en vidrio deslustrado, en el cual se plantea inicialmente el diagnóstico de bronconeumonía. Ante la evolución desfavorable y no respuesta al tratamiento, se realizó un estudio para descartar enfermedades pulmonares crónicas. El paciente fallece y se confirma el diagnóstico por anatomía patológica. Se realiza una revisión del tema.The pulmonary alveolar proteinosis is a chronic respiratory disease characterized by surfactant metabolism alteration determining its abnormal accumulation in the alveolar space. It is a disease very rare and in literature only 500 cases have been reported; it was described for the first time in 1958. This is a case presentation of pulmonary alveolar proteinosis in an infant aged 2 months with energetic protein malnutrition admitted due to respiratory difficulty and hypoxemia and with radiologic images of the reticulonodulillary, in frosting glass, where initially is made the diagnosis of bronchopneumonia. In the face of unfavorable evolution and no response to treatment, a study was conducted to rule out chronic pulmonary diseases. Patient died confirming the diagnosis according to the pathologic anatomy. A review on subject is carried out.

  20. Spiral Computed Tomography Based Maxillary Sinus Imaging in Relation to Tooth Loss, Implant Placement and Potential Grafting Procedure

    Directory of Open Access Journals (Sweden)

    Reinhilde Jacobs

    2010-01-01

    Full Text Available Objectives: The purpose of the present study was to explore the maxillary sinus anatomy, its variations and volume in patients with a need for maxillary implant placement.Materials and Methods: Maxillary sinus data of 101 consecutive patients who underwent spiral computed tomography (CT scans for preoperative implant planning in the maxilla at the Department of Periodontology, University Hospital, Catholic University of Leuven, Leuven, Belgium were retrospectively evaluated. The alveolar bone height was measured on serial cross-sectional images between alveolar crest and sinus floor, parallel to the tooth axis. In order to describe the size of the maxillary sinus anteroposterior (AP and mediolateral (ML diameters of the sinus were measured.Results: The results indicated that the alveolar bone height was significantly higher in the premolar regions in comparison to the molar region (n = 46, P 4 mm mucosal thickening mostly at the level of the sinus floor. The present sample did not allow revealing any significant difference (P > 0.05 in maxillary sinus dimensions for partially dentate and edentulous subjects.Conclusions: Cross-sectional imaging can be used in order to obtain more accurate information on the morphology, variation, and the amount of maxillary bone adjacent to the maxillary sinus.

  1. Occlusal plane change after intrusion of maxillary posterior teeth by microimplants to avoid maxillary surgery with skeletal Class III orthognathic surgery.

    Science.gov (United States)

    Park, Hyo-Sang; Kim, Ji-Yeun; Kwon, Tae-Geon

    2010-11-01

    To increase stability and mandibular setback movement, surgical maxillary impaction is normally performed with mandibular setback surgery in treating adult skeletal Class III patients. This article demonstrates the use of microimplants for anchorage to intrude molars and the resultant rotation of the maxillary occlusal plane clockwise to increase the surgical mandibular setback and reduce the posterior vertical dimension instead of maxillary surgical impaction. A 21-year-old man with mandibular prognathism was treated with mandibular setback surgery that included orthodontic treatment for decompensation. Microimplants placed into the palatal alveolar bone between the maxillary first and second molars were used to intrude the maxillary posterior teeth and change the occlusal plane clockwise. This produced 4 mm more of distal movement of the chin during mandibular setback surgery compared with the surgical prediction with no change in the occlusal plane. These results were similar to those of 2-jaw surgery with maxillary posterior impaction. The intrusion of the maxillary posterior teeth with microimplants might prevent the need for maxillary surgery in adult skeletal Class III patients. Copyright © 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  2. Mass in right maxillary

    International Nuclear Information System (INIS)

    Marins, J.L.C.

    1988-01-01

    A radiological study in a patient with increasing of the volume in the naso-maxillary region was done. The proposed diagnosis were carcinomas, lymphomas, sarcomas, teeth cyst, granulomas, mycoses and other. (L.M.J.)

  3. Use of reconstructed CT images for evaluation of the position of screw-type temporary anchorage devices implanted in the maxillary molar region

    International Nuclear Information System (INIS)

    Hashimoto, Kazuya

    2007-01-01

    Temporary anchorage devices (TAD) have recently been employed for orthodontic treatment. I attempted to find the safest position for placing the screw-type TAD in the maxillary molar region. Using reconstructed CT images, I investigated the buccolingual and mesiodistal lengths of the interalveolar septums between the maxillary first premolar, second premolar, first molar, and the second molar. For the first and second molars, I measured the distance from the alveolar crest to the maxillary sinus. The results indicated that the safest position for placing a screw-type TAD was the interalveolar septum between the maxillary first molar and the second premolar at about a depth of 4-6 mm from the alveolar crest on the buccal side, and at about a depth of 2-6 mm from the alveolar crest on the palatal side. (author)

  4. Facial blanching after inferior alveolar nerve block anesthesia: an unusual complication

    OpenAIRE

    Kang, Sang-Hoon; Won, Yu-Jin

    2017-01-01

    The present case report describes a complication involving facial blanching symptoms occurring during inferior alveolar nerve block anesthesia (IANBA). Facial blanching after IANBA can be caused by the injection of an anesthetic into the maxillary artery area, affecting the infraorbital artery.

  5. Facial blanching after inferior alveolar nerve block anesthesia: an unusual complication.

    Science.gov (United States)

    Kang, Sang-Hoon; Won, Yu-Jin

    2017-12-01

    The present case report describes a complication involving facial blanching symptoms occurring during inferior alveolar nerve block anesthesia (IANBA). Facial blanching after IANBA can be caused by the injection of an anesthetic into the maxillary artery area, affecting the infraorbital artery.

  6. The Efficacy of Buccal Infiltration of 4% Articaine and PSA Injection of 2% Lidocaine on Anesthesia of Maxillary Second Molars

    OpenAIRE

    Maljaei, Ensiyeh; Pourkazemi, Maryam; Ghanizadeh, Milad; Ranjbar, Rana

    2017-01-01

    Introduction: During the early mixed dentition period, the location of the deciduous maxillary second molar results in ineffectiveness of the infiltration technique in this area. In such cases, administration of posterior superior alveolar (PSA) nerve block is recommended; however, such a technique has some complications. The present study was undertaken to compare the effects of buccal infiltration of 4% Articaine and PSA technique with 2% Lidocaine on the success of anesthesia of maxillary ...

  7. Alveolar distraction osteogenesis applications in cleft lip and palate patients: a literature review

    Directory of Open Access Journals (Sweden)

    Öznur Mülayim

    2016-05-01

    Full Text Available Distraction osteogenesis technique has been successfully applied in the craniofacial area for long time, and it is being applied increasingly more in cleft lip and palate patients also. Especially in large cleft palate cases, bone grafting or surgical procedures such as distraction osteogenesis can be applied in order to ensure a smooth alveolar arc. In this literature review, alveolar (segmental distraction osteogenesis applications in patients with cleft lip and palate, indications of the technique, advantages and disadvantages, application methods and types of appliances used for this purpose have been evaluated. As conclusion, especially with the application of alveolar (segmental distraction osteogenesis, successful outcome can be achieved in cleft lip and palate patients with velopharyngeal insufficiency, maxillary hypoplasia and maxillary crowding, and this technique may be an alternative to conventional osteotomies and extraoral distractions.

  8. Radiodiagnostics of maxillary osteomyelitis

    International Nuclear Information System (INIS)

    Klemova, J.; Jenca, A.; Hanusinova, V.; Danko, J.; Ondrasovicova, J.

    2006-01-01

    Osteomyelitis is defined as an inflammation or infection in bone tissues - cancellous bone, bone marrow, bone compacta and periosteum due to invasion of infection from surrounding tissues. Maxillary osteomyelitis is less common disease than osteomyelitis of mandible. This can be explained by anatomical structure of maxilla which is mainly composed of sinuses and thin bone lamellae. Such a structure allows rapid propagation of the infection to the surface. There have been examined and treated 70 patients with osteomyelitis of facial bones within past 15 years at Department of stomatology and maxillo-facial surgery of P.J. Safarik University in Kosice. Only four cases were diagnosed as maxillary osteomyelitis. The aim of this study was to mention the differences in anatomy and symptoms of acute and chronic stage of maxillary osteomyelitis and to give a detailed radiographic picture of this affliction. (authors)

  9. Sinus lifting before Le Fort I maxillary osteotomy: a suitable method for oral rehabilitation of edentulous patients with skelettal class-III conditions: review of the literature and report of a case

    Directory of Open Access Journals (Sweden)

    Meyer Ulrich

    2007-01-01

    Full Text Available Abstract Background Functional rehabilitation of patients afflicted with severe mandibular and maxillary alveolar atrophy might be challenging especially in malformed patients. Methods Treatment planning using sinus lifting and implant placement before Le Fort I maxillary osteotomy in a patient with severe mandibular and posterior maxillary alveolar atrophy and skelettal class-III conditions due to cleft palate are described. Results A full functional and esthetic rehabilitation of the patient was achieved by a stepwise surgical approach performed through sinus lifting as the primary approach followed by implant placement and subsequent Le Fort I maxillary osteotomy to correct the maxillo-mandibular relation. Conclusion Stabilisation of the maxillary complex by a sinus lifting procedure in combination with computer aided implant placement as preorthodontic planning procedure before Le Fort I maxillary osteotomy seems to be suitable in order to allow ideal oral rehabilitation especially in malformed patients.

  10. Effects of pre-surgical nasoalveolar moulding on maxillary arch and nasal form in unilateral cleft lip and palate before lip surgery.

    Science.gov (United States)

    Fuchigami, T; Kimura, N; Kibe, T; Tezuka, M; Amir, M S; Suga, H; Takemoto, Y; Hashiguchi, M; Maeda-Iino, A; Nakamura, N

    2017-11-01

    To investigate the effects of pre-surgical nasoalveolar moulding (PNAM) on the maxillary arch and nasal form in patients with unilateral cleft lip and palate (UCLP). This is a retrospective case series study. The subjects were infants with complete UCLP who were treated with PNAM (n = 18) at Kagoshima University Medical and Dental Hospital (Japan) between 2006 and 2013. Maxillary dental casts and facial photographs were taken at the time of the first visit and immediately prior to lip surgery to evaluate the maxillary arch and nasal form changes. The dental casts were scanned with a laser scanner, and changes in the 3-Dimensional coordinates of anatomical landmarks and alveolar cleft width were analysed. Moreover, we investigated the correlation between the changes in the maxillary alveolar arch and nasal form. Regarding the maxillary alveolar arch form, the anterior points of the major segment had moved significantly to the cleft side just prior to the time of lip repair, and the alveolar cleft width was significantly decreased. For nasal form, the inclination and displacement of the columella were significantly improved. The improvement of columella inclination was moderately correlated with the posterior movement of the anterior points of the major segment. These findings indicate that PNAM for infants with UCLP enhanced symmetry in the maxillary alveolar arch and nasolabial form. In addition, the posterior movement of the anterior points of the maxillary alveolar arch was correlated with the improvement of columella deformation. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  11. Influence of reinforcement on strains within maxillary implant overdentures.

    Science.gov (United States)

    Takahashi, Toshihito; Gonda, Tomoya; Maeda, Yoshinobu

    2015-01-01

    The purpose of this study was to examine the influence of reinforcement of an embedded cast on the strains within maxillary implant overdentures. A maxillary edentulous model with implants placed bilaterally in the canine positions, dome-shaped copings, and experimental overdentures was fabricated. Rosette-type strain gauges were attached in the canine positions and at three points along the midline of the polished surface of the denture and connected to the sensor interface controlled by a personal computer. Experimental dentures with five different reinforcements were tested: without reinforcement; with a cast cobalt-chrome reinforcement over the residual ridge and the tops of the copings; with the same reinforcement from first molar to first molar, over the residual ridge and the tops of the copings; with the same reinforcement over the residual ridge and the sides of the copings; and with the same reinforcement from first molar to first molar, over the residual ridge and the sides of the copings. A vertical occlusal load of 49 N was applied to the first premolar and then to the first molar, and the strains were measured and compared by analysis of variance. In both loading situations, significantly less strain was recorded in dentures with reinforcement than in those without reinforcement. When the first premolar was loaded on dentures with and without palatal reinforcement at the first premolars, the strains on the denture with reinforcement over the tops of the copings were significantly lower than on the denture with reinforcement over the sides of the copings at the canine position. Cast reinforcement over the residual ridge and the top of copings embedded in an acrylic base reduced the strain from occlusal stress on maxillary implant overdentures.

  12. Maxillary Swelling as the First Evidence of Multiple Myeloma

    Directory of Open Access Journals (Sweden)

    Atsushi Kasamatsu

    2015-01-01

    Full Text Available Multiple myeloma is a malignant neoplasm of plasma cells characterized by proliferation of a single clone of abnormal immunoglobulin-secreting plasma cells. Since the amount of hemopoietic bone marrow is decreased in the maxilla, oral manifestations of multiple myeloma are less common in the maxilla than in the mandible. We report the case of 33-year-old Japanese man who presented with a mass in the right maxillary alveolar region. Computed tomography and magnetic resonance images showed a soft tissue mass in the right maxilla eroding the anterior and lateral walls of the maxillary sinus and extending into the buccal space. The biopsy results, imaging, and laboratory investigations led to the diagnosis of multiple myeloma. This case report suggests that oral surgeons and dentists should properly address oral manifestations as first indications of multiple myeloma.

  13. Maxillary Swelling as the First Evidence of Multiple Myeloma

    Science.gov (United States)

    Kasamatsu, Atsushi; Kimura, Yasushi; Tsujimura, Hideki; Kanazawa, Harusachi; Koide, Nao; Miyamoto, Isao; Endo-Sakamoto, Yosuke; Shiiba, Masashi; Tanzawa, Hideki; Uzawa, Katsuhiro

    2015-01-01

    Multiple myeloma is a malignant neoplasm of plasma cells characterized by proliferation of a single clone of abnormal immunoglobulin-secreting plasma cells. Since the amount of hemopoietic bone marrow is decreased in the maxilla, oral manifestations of multiple myeloma are less common in the maxilla than in the mandible. We report the case of 33-year-old Japanese man who presented with a mass in the right maxillary alveolar region. Computed tomography and magnetic resonance images showed a soft tissue mass in the right maxilla eroding the anterior and lateral walls of the maxillary sinus and extending into the buccal space. The biopsy results, imaging, and laboratory investigations led to the diagnosis of multiple myeloma. This case report suggests that oral surgeons and dentists should properly address oral manifestations as first indications of multiple myeloma. PMID:26640721

  14. Three dimensional analysis of CT image on naso-maxillary complex in cleft lip and palate patients

    International Nuclear Information System (INIS)

    Ma, Rong-Rong

    1994-01-01

    This study was designed to clarify the three dimensional features of naso-maxillary complex in cleft lip and palate (CLP) by using computed tomography (CT) and to examine its change following an upper dental arch expansion. Sequential CT images with 2mm-thickness were obtained for 11 unilateral CLP boys (UCLP), 6 bilateral CLP boys (BCLP) and 4 boys without cleft (non-cleft). Additionally, two serial sets of upper dental cast before and after dental arch expansion coupled with CT images in UCLP were used to evaluate the effect of dental arch expansion on the naso-maxillary complex. UCLP demonstrated a remarkable naso-maxillary deformity characterized by a decreased volume of maxillary sinus in comparison with the non-cleft patients. Both the volume and shape of nasal cavity were significantly different between the cleft and non cleft side. Naso-maxillary morphology of BCLP, however, was similar to that of the non cleft except for the decreased volume of alveolar arch. Comparative study of UCLP and BCLP showed a significant difference in naso-maxillary morphology. There were some significant correlations between the dental arch expansion and change of each naso-maxillary component, suggesting the effect of expansion stress on the naso-maxillary complex in UCLP. However, deformation caused by expansion stress varied, depending on each component of the naso-maxillary complex. (author) 61 refs

  15. Three dimensional analysis of CT image on naso-maxillary complex in cleft lip and palate patients

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Rong-Rong [Tokyo Medical and Dental Univ. (Japan). School of Dentistry

    1994-12-01

    This study was designed to clarify the three dimensional features of naso-maxillary complex in cleft lip and palate (CLP) by using computed tomography (CT) and to examine its change following an upper dental arch expansion. Sequential CT images with 2mm-thickness were obtained for 11 unilateral CLP boys (UCLP), 6 bilateral CLP boys (BCLP) and 4 boys without cleft (non-cleft). Additionally, two serial sets of upper dental cast before and after dental arch expansion coupled with CT images in UCLP were used to evaluate the effect of dental arch expansion on the naso-maxillary complex. UCLP demonstrated a remarkable naso-maxillary deformity characterized by a decreased volume of maxillary sinus in comparison with the non-cleft patients. Both the volume and shape of nasal cavity were significantly different between the cleft and non cleft side. Naso-maxillary morphology of BCLP, however, was similar to that of the non cleft except for the decreased volume of alveolar arch. Comparative study of UCLP and BCLP showed a significant difference in naso-maxillary morphology. There were some significant correlations between the dental arch expansion and change of each naso-maxillary component, suggesting the effect of expansion stress on the naso-maxillary complex in UCLP. However, deformation caused by expansion stress varied, depending on each component of the naso-maxillary complex. (author) 61 refs.

  16. A cone-beam computed tomography evaluation of buccal bone thickness following maxillary expansion

    Energy Technology Data Exchange (ETDEWEB)

    Akyalcin, Sercan; Englih, Jeryl D.; Stephens, Claude R.; Winkelmann, Sam [Dept. of Orthodontics, School of Dentistry, University of Texas Health Science Center at Houston, Houston (United States); Schaefer, Jeffrey S. [Todd Hughes Orthodontics, Houston (United States)

    2013-06-15

    This study was performed to determine the buccal alveolar bone thickness following rapid maxillary expansion (RME) using cone-beam computed tomography (CBCT). Twenty-four individuals (15 females, 9 males; 13.9 years) that underwent RME therapy were included. Each patient had CBCT images available before (T1), after (T2), and 2 to 3 years after (T3) maxillary expansion therapy. Coronal multiplanar reconstruction images were used to measure the linear transverse dimensions, inclinations of teeth, and thickness of the buccal alveolar bone. One-way ANOVA analysis was used to compare the changes between the three times of imaging. Pairwise comparisons were made with the Bonferroni method. The level of significance was established at p<0.05. The mean changes between the points in time yielded significant differences for both molar and premolar transverse measurements between T1 and T2 (p<0.05) and between T1 and T3 (p<0.05). When evaluating the effect of maxillary expansion on the amount of buccal alveolar bone, a decrease between T1 and T2 and an increase between T2 and T3 were found in the buccal bone thickness of both the maxillary first premolars and maxillary first molars. However, these changes were not significant. Similar changes were observed for the angular measurements. RME resulted in non-significant reduction of buccal bone between T1 and T2. These changes were reversible in the long-term with no evident deleterious effects on the alveolar buccal bone.

  17. Partial maxillary osteotomy following an unsuccessful forced eruption of an impacted maxillary canine: 10 year follow-up. Review and case report

    Directory of Open Access Journals (Sweden)

    Edela Puricelli

    2012-12-01

    Full Text Available The maxillary canines are amongst the most frequently impacted teeth, second only to the third molars. Several conservative orthodontic and surgical techniques are available to position the teeth properly in the dental arch, even in severe cases. However, when an extraction is necessary, it often leaves a critical alveolar defect of difficult management. The authors present the technique of Partial Maxillary Osteotomy, in which a dento-alveolar segment is moved mesially, hence closing the remaining space, allowing for the formation of healthy periodontium and resulting in an adequate functional and aesthetic outcome. A case report is presented with a 10 year follow-up, proving the technique's stability in the long term.

  18. Preoperative Cleft Lip Measurements and Maxillary Growth in Patients With Unilateral Cleft Lip and Palate.

    Science.gov (United States)

    Antonarakis, Gregory S; Tompson, Bryan D; Fisher, David M

    2016-11-01

    Maxillary growth in patients with cleft lip and palate is highly variable. The authors' aim was to investigate associations between preoperative cleft lip measurements and maxillary growth determined cephalometrically in patients with complete unilateral cleft lip and palate (cUCLP). Retrospective cross-sectional study. Children with cUCLP. Preoperative cleft lip measurements were made at the time of primary cheiloplasty and available for each patient. Maxillary growth was evaluated on lateral cephalometric radiographs taken prior to any orthodontic treatment and alveolar bone grafting (8.5 ± 0.7 years). The presence of associations between preoperative cleft lip measurements and cephalometric measures of maxillary growth was determined using regression analyses. In the 58 patients included in the study, the cleft lateral lip element was deficient in height in 90% and in transverse width in 81% of patients. There was an inverse correlation between cleft lateral lip height and transverse width with a β coefficient of -0.382 (P = .003). Patients with a more deficient cleft lateral lip height displayed a shorter maxillary length (β coefficient = 0.336; P = .010), a less protruded maxilla (β coefficient = .334; P = .008), and a shorter anterior maxillary height (β coefficient = 0.306; P = .020) than those with a less deficient cleft lateral lip height. Patients with cUCLP present with varying degrees of lateral lip hypoplasia. Preoperative measures of lateral lip deficiency are related to later observed deficiencies of maxillary length, protrusion, and height.

  19. 3D-Printed Scaffolds and Biomaterials: Review of Alveolar Bone Augmentation and Periodontal Regeneration Applications

    OpenAIRE

    Asa'ad, Farah; Pagni, Giorgio; Pilipchuk, Sophia P.; Giann?, Aldo Bruno; Giannobile, William V.; Rasperini, Giulio

    2016-01-01

    To ensure a successful dental implant therapy, the presence of adequate vertical and horizontal alveolar bone is fundamental. However, an insufficient amount of alveolar ridge in both dimensions is often encountered in dental practice due to the consequences of oral diseases and tooth loss. Although postextraction socket preservation has been adopted to lessen the need for such invasive approaches, it utilizes bone grafting materials, which have limitations that could negatively affect the qu...

  20. Radiographic Comparison of Bovine Bone Substitute Alone versus Bovine Bone Substitute and Simvastatin for Human Maxillary Sinus Augmentation

    Directory of Open Access Journals (Sweden)

    Amir Ali Reza Rasouli Ghahroudi

    2018-01-01

    Full Text Available Objectives: The aim of this study was to compare the efficacy of bovine bone substitute (Compact Bone B. ® alone versus bovine bone substitute and simvastatin for human maxillary sinus augmentation.Materials and Methods: This study was conducted on 16 sinuses in eight patients. Radiographic assessments were done preoperatively (T0, immediately (T1 and at nine months after sinus grafting (T2. Alveolar bone height and density were assessed on cone beam computed tomography (CBCT scans using Planmeca Romexis™ Imaging Software 2.2.Results: The change in alveolar bone height and density between T0, T1 and T2 was significant in both groups. Alveolar bone height (h0, h1, h2 and vertical height of the grafted bone (g1, g2 in three lines (anterior, middle and posterior were not significantly different between groups. The grafted bone height shrinkage (% in the anterior, middle and posterior limits of the augmented area were not significantly different between groups. The existing alveolar and grafted bone density increased significantly in both groups between T1 and T2, except for the existing alveolar bone density in the control group. There were no statistically significant differences between the alveolar bone density values obtained in TI and T2 between groups, except for the existing alveolar bone density at T1.Conclusions: This study did not show any significant positive effect for simvastatin in maxillary sinus augmentation based on radiographic examination.

  1. Maxillary anterior segmental distraction osteogenesis with 2 different types of distractors.

    Science.gov (United States)

    Choi, Hye-Young; Hwang, Chung-Ju; Kim, Hee-Jin; Yu, Hyung-Seog; Cha, Jung-Yul

    2012-05-01

    Maxillary anterior segmental distraction osteogenesis (DO) has been the alternative treatment option for patients with midfacial retrusion. To investigate a potentially more effective maxillary anterior segmental DO, a newly designed intraoral alveolar distractor was applied. The objectives of this study were to investigate the skeletal and dental effects of maxillary anterior segmental DO and the relapse pattern. The study was carried out for 8 patients with unilateral cleft lip and palate (mean age, 16 years 7 months). Four patients were treated with an intraoral appliance (IA), and the remaining with a rigid external distractor (RED). Dental and skeletal measurements were obtained for both groups. These measurements were compared for different time points including pre-DO (T1), post-DO (T2), postconsolidation (T3), and 1-year follow-up (T4). Horizontal change of A point was significantly larger after distraction period (T2) in the RED group (mean, 11.0 mm; median, 10.1 mm) than in the IA group (mean, 6.6 mm; median, 7.4 mm) (P distraction, showing a significant difference between groups (P Maxillary anterior segmental DO is effective for the treatment of patients with cleft lip and palate. The alveolar space is regained, and the facial profile is improved without velopharyngeal problems. Superior results are obtained using the RED appliance for maxillary anterior segmental DO relative to the use of the intraoral distractor appliance.

  2. MAXILLARY GROWTH PATTERNS IN ROMANIAN CHILDREN WITH CLEFT PALATE DURING THE FIRST 6 YEARS OF LIFE

    Directory of Open Access Journals (Sweden)

    Liliana-Gabriela Halitchi

    2012-12-01

    Full Text Available In order to visualize, evaluate and measure the maxillary growth in patients with cleft palate and to identify the reactive morphological pattern that could be identified from the dimensional changes produced along the first six years of life, maxillary impressions were made in two groups of study, by means of standard trays and silicone impression materials. The maxillary casts resulted had been 3D scanned at Multinr, in Sf. Gheorghe. The study was carried on a number of 34 patients with cleft palate, 16 boys and 18 girls, with ages between 2 months and 6 years, operated by the same surgical team in “St. Mary” University Children Hospital of Iaşi, as well as on 60 normal children. Bivariate Student’s t test established statistically significant negative differences between the mean values of the anterior and posterior width of the maxillary alveolar arch, positive non significant differences for the length and positive differences for the depth of the dehiscent palate in the experimental group, comparatively with normal children. Cleft palate patients have narrowed and shorter maxillary alveolar arch and flattened palate. At least therapeutically, the cleft palate group, operated at different ages, from 2 to 4 years, could not react like other groups of study from important European Cleft Centers and benefit from a good residual growth.

  3. Maxillary sinus augmentation

    Directory of Open Access Journals (Sweden)

    A B Tarun Kumar

    2015-01-01

    Full Text Available Placing dental implants in the maxillary posterior region can be both challenging and un-nerving for a regular implant dentist who is not well versed with advanced surgical procedures. It is vital for a general dentist to understand the fundamentals of bone grafting the maxillary sinus if he/she is really committed to providing the best health care for their patients. The dental practice is seeing an increasing group of patients who are living longer, and this group of older baby boomers often has an edentulous posterior maxilla either unilateral or bilateral. When edentulous, the posterior maxilla more likely has diminished bone height, which does not allow for the placement of dental implants without creating additional bone. Through grafting the maxillary sinus, bone of ideal quality can be created (allowing for placement of dental implants, which offer many advantages over other tooth replacement modalities. The sinus graft offers the dental patient a predictable procedure of regenerating lost osseous structure in the posterior maxilla. This offers the patient many advantages for long-term success. If dentists understand these concepts, they can better educate their patients and guide them to have the procedure performed. This article outlines bone grafting of the maxillary sinus for the purpose of placing dental implants. This review will help the readers to understand the intricacies of sinus augmentation. They can relate their patient's condition with the available literature and chalk out the best treatment plan for the patient, especially by using indirect sinus augmentation procedures which are less invasive and highly successful if done using prescribed technique.

  4. Transverse effects on the nasomaxillary complex one year after rapid maxillary expansion as the only intervention: A controlled study

    Directory of Open Access Journals (Sweden)

    Carolina da Luz Baratieri

    2014-10-01

    Full Text Available The aim of this study was to assess by means of cone-beam computed tomography (CBCT scans the transverse effects on the nasomaxillary complex in patients submitted to rapid maxillary expansion (RME using Haas expander in comparison to untreated individuals. This prospective controlled clinical study assessed 30 subjects (18 boys and 12 girls with mixed dentition and during pubertal growth. The treated group was submitted to RME with Haas expander, retention for six months and a six-month follow-up after removal. The control group matched the treated group in terms of age and sex distribution. CBCT scans were taken at treatment onset and one year after the expander was activated. Maxillary first molars (U6 width, right and left U6 angulation, maxillary alveolar width, maxillary basal width, palatal alveolar width, palatal base width, right and left alveolar angulation, palatal area, nasal base width, nasal cavity width and inferior nasal cavity area on the posterior, middle and anterior coronal slices were measured with Dolphin Imaging Software(r 11.5, except for the first two variables which were performed only on the posterior slice. All transverse dimensions increased significantly (P 0.05. Results suggest that increase of molar, maxillary, palatal and nasal transverse dimensions was stable in comparison to the control group one year after treatment with RME.

  5. Spectral Analysis of Word-Initial Alveolar and Velar Plosives Produced by Iranian Children with Cleft Lip and Palate

    Science.gov (United States)

    Eshghi, Marziye; Zajac, David J.; Bijankhan, Mahmood; Shirazi, Mohsen

    2013-01-01

    Spectral moment analysis (SMA) was used to describe voiceless alveolar and velar stop-plosive production in Persian-speaking children with repaired cleft lip and palate (CLP). Participants included 11 children with bilateral CLP who were undergoing maxillary expansion and 20 children without any type of orofacial clefts. Four of the children with…

  6. Root abnormalities, talon cusps, dentes invaginati with reduced alveolar bone levels: case report.

    LENUS (Irish Health Repository)

    McNamara, C M

    1998-03-01

    This is a case report of a Caucasian female who presented with an unusual combination of dental anomalies: short roots on the maxillary central incisors and premolars, talon cusps, dentes invaginati, low alveolar bone heights, tubercles of Carabelli on the maxillary first and second permanent molars, with pyramidal root morphology in three of the second permanent molars. None of the anomalies alone are particularly uncommon but they have not previously been reported together. The occurrence of the anomalies is probably incidental as the conditions are aetiologically unrelated.

  7. Multidisciplinary Management of An Unusual Isolated Alveolar Bone Infection- A Rare Case Report

    Science.gov (United States)

    B, Dixit Mala; S, Kulkarni Rahul; M, Ramugade Manoj

    2015-01-01

    Restoration of proximal defect of tooth is of paramount importance as its improper restoration usually results in fracture of the restoration or deteriorated periodontal health. The article reports a case with a discreet mass of alveolar bone necrosis closed to the overhanged amalgam restoration in the proximal box of the maxillary molar. As a result of this improper proximal restoration it led to deep periodontal pocket and subsequent alveolar bone necrosis which was managed successfully with combined Endodontic-Periodontic treatment. This article highlights the unfortunate sequelae of bone necrosis as a consequence of an incorrect or overlooked dental treatment and its comprehensive management. PMID:26155587

  8. Diplopia after inferior alveolar nerve block: case report and related physiology.

    Science.gov (United States)

    You, Tae Min

    2015-06-01

    Although inferior alveolar nerve block is one of the most common procedures performed at dental clinics, complications or adverse effects can still occur. On rare occasions, ocular disturbances, such as diplopia, blurred vision, amaurosis, mydriasis, abnormal pupillary light reflex, retrobulbar pain, miosis, and enophthalmos, have also been reported after maxillary and mandibular anesthesia. Generally, these symptoms are temporary but they can be rather distressing to both patients and dental practitioners. Herein, we describe a case of diplopia caused by routine inferior alveolar nerve anesthesia, its related physiology, and management.

  9. Pulmonary alveolar microlithiliasis

    International Nuclear Information System (INIS)

    Fasihuddin, S.; Alawi, Malak H.; Abdulshakoor, Bothania M.

    2004-01-01

    We report a patient with plmonary alveolar microlithiliasis who was admitted to King Abdul-Aziz Hospital, Makkah, Kingdom of Saudi Arabia with chest pain, shortness of breath dry cough and swelling of lower limbs.The patient underwent chest radiolgraphs and computerized tomography scan showing multiple diffuse, almost symmetrical bilateral micronodulor opacities of calicific density. The diagnosis was confirmed after percuraneous lung biopsy from the patient. Cardiokinetics, diuretics and oxygen were administerd with slight improvement. (author)

  10. Proteinosis alveolar pulmonar

    Directory of Open Access Journals (Sweden)

    Concepción Sánchez Infante

    2011-12-01

    Full Text Available La proteinosis alveolar pulmonar es una enfermedad respiratoria crónica, caracterizada por alteración en el metabolismo del surfactante, lo que determina su acumulación anormal en el espacio alveolar. Es una enfermedad extremadamente rara. Se han reportado solamente 500 casos en la literatura. Se describió por primera vez en 1958. Se presenta un caso de proteinosis alveolar pulmonar en un lactante de 2 meses, con desnutrición proteico energética, que ingresa por dificultad respiratoria e hipoxemia, y, con imágenes radiológicas de tipo retículo-nodulillar, en vidrio deslustrado, en el cual se plantea inicialmente el diagnóstico de bronconeumonía. Ante la evolución desfavorable y no respuesta al tratamiento, se realizó un estudio para descartar enfermedades pulmonares crónicas. El paciente fallece y se confirma el diagnóstico por anatomía patológica. Se realiza una revisión del tema.

  11. Pulmonary alveolar microlithiasis

    International Nuclear Information System (INIS)

    Vallejo, Franco Javier; Vallejo, Alejandro; Parra, Maximiliano

    2007-01-01

    Pulmonary alveolar microlithiasis (PAM) is a rare disease characterized by the diffuse and bilateral presence of calcium phosphate microlite in the alveolar spaces. The progression of this potentially lethal disease is show and most of the patients remain asymptomatic during years or decades, resulting in a show deterioration of the pulmonary function. The typical finding of the sand storm in the chest X-ray is characteristic of this entity. Mutations in the SLC34A2 gene that does the coding for the type II co-transporter of sodium phosphate were identified as responsible for this disease. Of the almost 600 cases, only 6 have been reported in Colombia. We are presenting a case of pulmonary alveolar microlite in a 27 year old man, with progressive respiratory distress whose diagnosis was made by the X-ray findings and confirmed by trans bronchial biopsy. In the 2 years follow-up, shows evolution towards deterioration of his respiratory function making him a candidate for lung transplantation.

  12. Congenital maxillary double lip

    Directory of Open Access Journals (Sweden)

    Dinesh Singh Chauhan

    2012-01-01

    Full Text Available Double lip, also referred to as "macrocheilia," is a rare anomaly which affects the upper lip more commonly than the lower lip. It consists of a fold of excess or redundant hypertrophic tissue on the mucosal side of the lip. The congenital double lip is believed to be present at birth and becomes more prominent after eruption of teeth. It affects esthetics and also interferes with speech and mastication. Simple surgical excision produces good functional and cosmetic results. We report a case of a non-syndromic congenital maxillary double lip in a 21-year-old male patient.

  13. Pediatric maxillary fractures.

    Science.gov (United States)

    Yu, Jack; Dinsmore, Robert; Mar, Philip; Bhatt, Kirit

    2011-07-01

    Pediatric craniofacial structures differ from those of adults in many ways. Because of these differences, management of pediatric craniofacial fractures is not the same as those in adults. The most important differences that have clinical relevance are the mechanical properties, craniofacial anatomy, healing capacity, and dental morphology. This article will review these key differences and the management of pediatric maxillary fractures. From the mechanical properties' perspective, pediatric bones are much more resilient than adult bones; as such, they undergo plastic deformation and ductile failure. From the gross anatomic perspective, the relative proportion of the cranial to facial structures is much larger for the pediatric patients and the sinuses are not yet developed. The differences related to dentition and dental development are more conical crowns, larger interdental spaces, and presence of permanent tooth buds in the pediatric population. The fracture pattern, as a result of all the above, does not follow the classic Le Fort types. The maxillomandibular fixation may require circum-mandibular wires, drop wires, or Ivy loops. Interfragmentary ligatures using absorbable sutures play a much greater role in these patients. The use of plates and screws should take into consideration the future development with respect to growth centers and the location of the permanent tooth buds. Pediatric maxillary fractures are not common, require different treatments, and enjoy better long-term outcomes.

  14. 上颌窦气化与上颌第一磨牙的相关性分析%The correlation between maxillary sinus aeration and maxillary molars: A CT image analysis

    Institute of Scientific and Technical Information of China (English)

    周泉生; 胡志; 孙大明; 刘成蛟; 李兴花

    2017-01-01

    AIM:To investigate the relationship between the aeration of maxillary sinus and maxillary molars.METHODS:The CT images of 50 patients with normal sinus(n =100) were analyzed retrospectively.The volume of maxillary sinus,the length of the first maxillary molar and its corresponding alveolar bone height and width were measured.The molars were divided into embedded and non-embedded types.The conelations between the molar length,the volume of maxillary sinus and the mass of alveolar bone were statistically analyzed.RESULTS:The average volume of maxillary sinus was (13.56 ± 5.63) mL,alveolar bone height and width were (11.35 ± 4.09) mm and (14.83 ± 1.56) mm respectively,the first molar length was (18.88 ± 2.69) mm.There was no correlation between the length of maxillary molars and the volume of maxillary sinus and alveolar bone mass (P > 0.05).No difference of the molar length was found between the embedded and non-embedded molars (P > 0.05).The volume of maxillary sinus in the embedded group was greater than that in the non-embedded group (P <0.05) and the alveolar bone mass in embedded group was less than that in the non-embedded group (P < 0.05).CONCLUSION:The maxillary molar has no significant correlation with the volume of maxillary sinus and the alveolar bone mass.But for maxillary sinus with obvious aeration,the probability of molar protrusion into the maxillary sinus increases.%目的:探讨上颌窦气化与上颌第一磨牙的关系.方法:回顾性分析50例(100个上颌第一磨牙)副鼻窦CT检查正常的患者影像资料,测量上颌窦容积、上颌第一磨牙长度以及对应牙槽骨的高度和宽度;并将第一磨牙分为嵌入型和非嵌入型,分析两组间差异以及上颌第一磨牙长度与上颌窦容积、牙槽骨骨量的相关性.结果:50例(100个)正常上颌窦平均容积(13.56 5.63) mL,牙槽骨高度(11.35±4.09) mm,牙槽骨宽度(14.83±1.56)mm,第一磨牙长度(18.88 ±2.69) mm.上颌第一磨牙长度

  15. Alveolar rhabdomyosarcoma: origin and prognostic implications of molecular findings.

    Science.gov (United States)

    Eguía-Aguilar, Pilar; López-Martínez, Briceida; Retana-Contreras, Carmen; Perezpeña-Diazconti, Mario

    We present the case of a 2-year-old male patient with a facial tumor partially treated with chemotherapy before his admission to our institution. The tumor involved from the frontal region to the maxillary floor, the orbit, and the maxillary and sphenoid sinuses. The histopathological diagnosis revealed a stage IV alveolar rhabdomyosarcoma with infiltration to bone marrow and cerebrospinal fluid. He was managed with four cycles of adriamycin, actinomycin, cyclophosphamide and vincristine; cisplatin and irinotecan were added to the last cycle. The tumor had a 50% size reduction, but the patient died after a neutropenia and fever episode. The aggressive behavior of alveolar rhabdomyosarcoma has been associated with the expression of oncogenic fusion proteins resulting from chromosomal translocations, particularly t(2;13) (q35;q14) PAX3/FOXO1, and t(1;13) (p36;q14) PAX7/FOXO1 which were present in this patient. Copyright © 2016 Hospital Infantil de México Federico Gómez. Publicado por Masson Doyma México S.A. All rights reserved.

  16. Maxillary Swing Approach for Removal of Palatal Carcinoma: A Modified Procedure

    Directory of Open Access Journals (Sweden)

    Tsutomu Nomura

    2018-01-01

    Full Text Available Introduction. We report a modification of the maxillary swing approach to remove a palatal tumor while preserving the anterior alveolar area. Methods. Case report using clinical records. Results. The patient was a 54-year-old male. TNM grade was T4bN0M0, and invasion to the base of the pterygoid process was seen. Two courses of induction chemotherapy were administered prior to the operation. Because there was no evidence of anterior maxillary invasion, the maxillary swing approach was chosen. The left anterior maxilla was cut and swung laterally, preserving the blood supply. After removal of the palatal tumor, the maxilla was repositioned and the defect was restored with an anterior lateral thigh flap. Postoperative course was typical, and facial appearance, speech, and masticatory function were satisfactory. Conclusions. This technique is particularly useful for preserving appearance as well as speech and mastication.

  17. Factors influencing the presence of interproximal dental papillae between maxillary anterior teeth.

    Science.gov (United States)

    Chen, Min-Chieh; Liao, Yu-Fang; Chan, Chiu-Po; Ku, Yen-Chen; Pan, Whei-Lin; Tu, Yu-Kang

    2010-02-01

    The presence of interdental papillae in the maxillary anterior region plays a key esthetic role. The aim of this study is to investigate the impact of demographic variables, such as gender and ages, and radiographic measurements of interdental area anatomy on the presence of interdental papillae. Periapical radiographs of 102 interdental papillae between maxillary anterior teeth were obtained in 30 adults who had fully erupted permanent dentition, healthy gingiva, and well-aligned maxillary anterior teeth. A radiopaque material was placed on the tip of the interdental papilla and the mucogingival junction. Radiographic measurements of tooth shape, alveolar bone level, and interdental space anatomy were undertaken using computer software. When each factor was evaluated individually, the shorter the distance between the contact bone and alveolar bone crest, the shorter the distance between two adjacent teeth, and the smaller the embrasure area, the more likely interdental papillae were present. Interdental papillae were more likely to be present between teeth with a rectangular tooth form. When all factors were evaluated together, the presence of interdental papillae was only significantly related to the distance from the contact point to the bone crest (P = 0.038). In the anterior maxillary region, the shorter the distance between the contact point to the bone crest, the more likely interdental papillae were present.

  18. Alveolar bone preservation subsequent to miniscrew implant placement in a canine model

    DEFF Research Database (Denmark)

    Melsen, Birte; Huja, Sarandeep; Chien, Hua-Hong

    2015-01-01

    Abstract OBJECTIVE: To assess the effects of transcortical screws on alveolar (bone) ridge preservation following extraction. DESIGN: Four adult beagle dogs had mandibular premolars extracted bilaterally. After 6 weeks, using a split-mouth design, two transcortical screws were inserted unilateral...

  19. Maxillary Hypoplasia With Congenital Oligodontia Treated by Maxillary Distraction Osteogenesis.

    Science.gov (United States)

    Mishima, Sayaka; Yamaguchi, Takako; Watanabe, Takuma; Komatani, Toru; Nakao, Kazumasa; Takahashi, Katsu; Bessho, Kazuhisa

    2018-02-27

    It is known that congenitally missing teeth can often cause differences in craniofacial morphology; however, there are few reported cases of orthognathic surgical treatment for these patients. Herein, the authors report a rare case of maxillary hypoplasia with congenital oligodontia treated by maxillary distraction osteogenesis with internal device. A 17-year-old male presenting with multiple tooth agenesis and maxillary recession was referred to our hospital for orthognathic surgical treatment. Preoperative simulation surgery was performed using Full-Color 3-dimensional salt model. After surgery, improvement in maxillary recession and occlusal stability was observed. This report demonstrates the advantages of the method used herein, which includes reduction in operating time with increase in the safety of the procedure.

  20. Maxillary canine impactions related to impacted central incisors: two case reports.

    Science.gov (United States)

    Bayram, Mehmet; Ozer, Mete; Sener, Ismail

    2007-09-01

    The purpose of this case report is to describe the combined surgical and orthodontic treatment of two cases with an impacted maxillary central incisor and canine in the same quadrant and to discuss the causal relationship between them. The most common causes of canine impactions are usually the result of one or more factors such as a long path of eruption, tooth size-arch length discrepancies, abnormal position of the tooth bud, prolonged retention or early loss of the deciduous canine, trauma, the presence of an alveolar cleft, ankylosis, cystic or neoplastic formation, dilaceration of the root, supernumerary teeth, and odontomas. Although impaction of the maxillary central incisor is almost as prevalent as impacted canines its etiology is different. The principal factors involved in causing the anomaly are supernumerary teeth, odontomas, and trauma. Case #1: A 10.5-year-old girl in the early mixed dentition stage presented with a chief complaint of the appearance of her anterior teeth. She had a Class I skeletal pattern and a history of trauma to the maxillary central incisors at age five with premature exfoliation. Radiographs revealed an impacted upper right central incisor in the region of the nasal floor, delayed eruption of the maxillary permanent central incisor, and the adjacent lateral incisor was inclined toward the edentulous space. Treatment was done in two stages consisting of surgical exposure and traction of the impacted central incisor and fixed orthodontic treatment. Case #2: An 11.5-year-old girl presented for orthodontic treatment with the chief complaint of an unerupted tooth and the appearance of her upper anterior teeth. She was in the late mixed dentition period with a Class III skeletal pattern along with an anterior cross-bite with some maxillary transverse deficiency. The maxillary right canine and central incisor were absent, but the maxillary right deciduous canine was still present. Treatment included arch expansion followed by

  1. The role of proper treatment of maxillary sinusitis in the healing of persistent oroantral fistula

    Directory of Open Access Journals (Sweden)

    David B. Kamadjaja

    2008-09-01

    Full Text Available Background: Oroantral communication (OAC is one of the possible complications after extraction of the upper teeth. If not identified and treated properly, a large OAC may develop into oroantral fistula (OAF which means that there is a permanent epithelium-lined communication between antrum and oral cavity. Such fistulas may cause ingress of microorganism from oral cavity into the antrum leading to maxillary sinusitis. Oroantral fistula usually persists if the infection in the maxillary antrum is not eliminated. Therefore, treatment of oroantral fistula should include management of maxillary sinusitis in which surgical closure of oroantral fistula should be done only when the sinusitis has been cured. Purpose: This case report emphasizes on the importance of proper management of maxillary sinusitis in the healing of oroantral fistula. Case: A case of an oroantral fistula following removal of upper left third molar is presented. As the maxillary sinusitis was not identified pre-operatively, two surgical procedures to close the fistula had ended up in dehiscence. Case management: The diagnosis of maxillary sinusitis was finally made and the sinusitis subsequently treated with combination of trans-alveolar sinus wash out, insertion of an acrylic splint, and two series of nasal and sinus physiotherapy procedures. The size of the defect decreased gradually during the treatment of the sinusitis and finally closed up without any further surgical intervention. Conclusion: This case report points out that it is important to detect intraoperatively an antral perforation after any surgery of the maxillary teeth and to close any oroantral communication as early as possible and that it is important to treat properly any pre-existing maxillary sinusitis before any surgical method is done to close the fistula.

  2. Comparison of panoramic radiograph with cone-beam computed tomography in assessment of maxillary sinus floor and nasal floor

    Directory of Open Access Journals (Sweden)

    Vijay Kumar Bokkasam

    2015-01-01

    Full Text Available Introduction: Panoramic radiograph is frequently prescribed by dentists for implant planning and, hence, accurate assessment of anatomical structures in panoramic radiograph is of utmost importance. Aims: The aim of the present study is to know the accuracy of panoramic radiograph in assessment of relationship between maxillary sinus floor and posterior teeth roots, and the distance from alveolar crest to nasal floor by comparing it with that of cone-beam computed tomographic (CBCT image. Materials and Methods: Panoramic and CBCT images of 30 patients were analyzed. The topographic relationship of each root of posterior teeth to the maxillary sinus floor was evaluated and classified into three classes. The distance from the peak point on maxillary alveolar crest to nasal floor was measured in panoramic radiograph as well as in CBCT image. All the measurements were made by built-in measurement tools. Results: Class 1 roots in panoramic radiograph showed high agreement (86% with CBCT image, followed by class 0 (76%. There was a significant difference in the measurements of alveolar bone height (ABH in the nasal floor region with a P value of 0.018. Conclusion: Panoramic radiograph is reliable in assessment of nasal floor and maxillary sinus, provided position of the patient, distortion, and the inherent magnification factor are taken into consideration.

  3. Alveolar Soft Part Sarcoma.

    Science.gov (United States)

    Jaber, Omar I; Kirby, Patricia A

    2015-11-01

    Alveolar soft part sarcoma is a rare neoplasm usually arising in the soft tissues of the lower limbs in adults and in the head and neck region in children. It presents primarily as a slowly growing mass or as metastatic disease. It is characterized by a specific chromosomal alteration, der(17)t(X:17)(p11:q25), resulting in fusion of the transcription factor E3 (TFE3) with alveolar soft part sarcoma critical region 1 (ASPSCR1) at 17q25. This translocation is diagnostically useful because the tumor nuclei are positive for TFE3 by immunohistochemistry. Real-time polymerase chain reaction to detect the ASPSCR1-TFE3 fusion transcript on paraffin-embedded tissue blocks has been shown to be more sensitive and specific than detection of TFE3 by immunohistochemical stain. Cathepsin K is a relatively recent immunohistochemical stain that can aid in the diagnosis. The recent discovery of the role of the ASPSCR1-TFE3 fusion protein in the MET proto-oncogene signaling pathway promoting angiogenesis and cell proliferation offers a promising targeted molecular therapy.

  4. Alveolar socket healing: what can we learn?

    Science.gov (United States)

    Araújo, Mauricio G; Silva, Cléverson O; Misawa, Mônica; Sukekava, Flavia

    2015-06-01

    Tooth extraction induces a series of complex and integrated local changes within the investing hard and soft tissues. These local alterations arise in order to close the socket wound and to restore tissue homeostasis, and are referred to as '"socket healing". The aims of the present report were twofold: first, to describe the socket-healing process; and, second, to discuss what can be learned from the temporal sequence of healing events, in order to improve treatment outcomes. The socket-healing process may be divided into three sequential, and frequently overlapping, phases: inflammatory; proliferative; and modeling/remodeling. Several clinical and experimental studies have demonstrated that the socket-healing process promotes up to 50% reduction of the original ridge width, greater bone resorption at the buccal aspect than at the lingual/palatal counterpart and a larger amount of alveolar bone reduction in the molar region. In conclusion, tooth extraction, once a simple and straightforward surgical procedure, should be performed in the knowledge that ridge reduction will follow and that further clinical steps should be considered to compensate for this, when considering future options for tooth replacement. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  5. Effects of maxillary sinus floor elevation surgery on maxillary sinus physiology

    NARCIS (Netherlands)

    Timmenga, NM; Raghoebar, GM; Liem, RSB; van Weissenbruch, R; Manson, WL; Vissink, A

    In a prospective study, the effects of elevation surgery of the maxillary sinus floor on maxillary sinus physiology were assessed. Seventeen consecutive patients without preoperative anamnestic, clinical and radiological signs of maxillary sinusitis underwent sinus floor elevation surgery with iliac

  6. Orthodontic Treatment Combined with Orthognathic Surgery and Simultaneous Alveolar Bone Graft of a Unilateral Complete Cleft Lip and Palate Patient: A Case Report.

    Science.gov (United States)

    Pisek, Poonsak; Manosudprasit, Montian; Wangsrimongkol, Tasanee; Jinaporntham, Suthin; Wiwatworakul, Opas

    2015-08-01

    This article aimed to present a case of 22 year-old Thai female with cleft lip and palate who had malocclusion developed from dental problems, skeletal disharmony and unrepaired alveolar cleft. The treatment was orthodontic combined with one-stage surgical correction which corrected skeletal discrepancy and alveolar cleft in single operation. After treatment, the patient had improved in facial esthetics, attaining good occlusal function and continuous maxillary dental arch. This procedure can reduce morbidity, preclude a second hospitalization and the cost of two-stage surgical correction. However this is only an alternative treatment for adult cleft patients who need late alveolar bone graft and orthognathic surgery.

  7. [Biomechanical study of internal midface distraction after different types of maxillary osteotomy in patients with cleft lip and palate].

    Science.gov (United States)

    Hou, Min; Shi, Guang-Yu; Pu, Li-Chen; Song, Da-Li; Zhang, Xi-Zhong; Liu, Chun-Ming

    2009-09-01

    To investigate the biomechanical changes of internal midface distraction after different types of maxillary osteotomy in patients with cleft lip and palate (CLP). 3-D finite element (FEM) analysis was used. 3-D models of Le Fort I, II, III osteotomy and soft tissue were established. Based on the new pattern of internal midface distractor, the distraction of maxillary complex was simulated to advance 10 mm anteriorly. The mechanical change was studied. The maxillary complex in CLP were advanced after distraction. Constriction of alveolar crest and palate occurred in Le Fort I osteotomy, but not in Le Fort II and III osteotomy. The maxillary complex was moved anteriorly en bloc after Le Fort III osteotomy, but some degree of rotation of maxillary complex was observed during the distraction after Le Fort I and II osteotomy. In vertical direction, the maxillary complex had more counterclockwise rotation after Le Fort II osteotomy. 3-D FEM analysis can be used for the study of internal distraction. It can reflect the maxillary movement and provide the theory basis for preoperative design.

  8. A simple approach to hollow maxillary complete denture fabrication: An innovative technique

    Directory of Open Access Journals (Sweden)

    Kathleen Manuela D'souza

    2017-01-01

    Full Text Available A severely atrophic maxillary arch exhibits reduced denture bearing area and increased inter-ridge distance, thus, affecting retention of the complete denture. Such clinical situations necessitate the fabrication of a hollow complete denture to reduce the weight of the prosthesis and increase retention. This article describes a simple technique to fabricate a hollow maxillary complete denture using salt and thermoplastic poly (methyl methacrylate sheet. The vacuum-formed thermoplastic matrix regulates the quantity of salt and determines its placement in the unpolymerized denture base material during the denture packing stage. The matrix lining the hollow cavity also aids to reinforce the hollow denture base.

  9. Bimaxillary protrusion with an atrophic alveolar defect: orthodontics, autogenous chin-block graft, soft tissue augmentation, and an implant.

    Science.gov (United States)

    Chiu, Grace S C; Chang, Chris H N; Roberts, W Eugene

    2015-01-01

    Bimaxillary protrusion in a 28-year-old woman was complicated by multiple missing, restoratively compromised, or hopeless teeth. The maxillary right central incisor had a history of avulsion and replantation that subsequently evolved into generalized external root resorption with Class III mobility and severe loss of the supporting periodontium. This complex malocclusion had a discrepancy index of 21, and 8 additional points were scored for the atrophic dental implant site (maxillary right central incisor). The comprehensive treatment plan included extraction of 4 teeth (both maxillary first premolars, the maxillary right central incisor, and the mandibular right first molar), orthodontic closure of all spaces except for the future implant site (maxillary right central incisor), augmentation of the alveolar defect with an autogenous chin-block graft, enhancement of the gingival biotype with a connective tissue graft, and an implant-supported prosthesis. Orthodontists must understand the limitations of bone grafts. Augmented alveolar defects are slow to completely turn over to living bone, so they are usually good sites for implants but respond poorly to orthodontic space closure. However, postsurgical orthodontic treatment is often indicated to optimally finish the esthetic zone before placing the final prosthesis. The latter was effectively performed for this patient, resulting in a total treatment time of about 36 months for comprehensive interdisciplinary care. An excellent functional and esthetic result was achieved. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  10. A Case Report of Ridge Augmentation using Onlay Interpositional Graft: An Approach to Improve Prosthetic Prognosis of a Deficit Ridge

    Directory of Open Access Journals (Sweden)

    Devanand Shetty

    2014-01-01

    Full Text Available Background: Periodontal therapy has developed beyond the scope of the treatment of periodontal pathoses. Periodontal plastic surgery consists of the reconstructive procedures designed to enhance the both function and esthetics. Deficient ridges pose a severe problem to the restorative dentist in restoring the natural form, function and esthetics of the prosthesis replacing the natural dentition. Depending upon the severity, location of these defects and the prosthetic option chosen, hard and soft tissue ridge augmentation or non-surgical approach or a combination may help to address them. The present clinical report describes a soft tissue ridge augmentation of a localized ridge defect in maxillary aesthetic region using onlay interpositional graft followed by fixed partial denture.

  11. Alveolar graft in the cleft lip and palate patient: Review of 104 cases

    Science.gov (United States)

    Tobella-Camps, María L.; Rivera-Baró, Alejandro

    2014-01-01

    Introduction: Alveolar bone grafting is a vital part of the rehabilitation of cleft patients. The factors that have been most frequently associated with the success of the graft are the age at grafting and the pre-grafting orthodontic treatment. Objectives: 1) Describe the cases of alveolar bone grafts performed at the Maxilofacial Unit of Hospital Sant Joan de Déu, Barcelona (HSJD); and 2) Analyze the success/failure of alveolar grafts and related variables. Material and Methods: Descriptive retrospective study using a sample of 104 patients who underwent a secondary alveolar graft at the Craniofacial Unit of HSJD between 1998 and 2012. The graft was done by the same surgeon in all patients using bone from the iliac crest. Results: 70% of the patients underwent the procedure before the age of 15 (median 14.45 years); 70% of the graft patients underwent pre-graft maxillary expansion. A total of 100 cases were recorded as successful (median age of 14.58 years, 68 underwent pre-graft expansion) and only 4 were recorded as failures (median age of 17.62 years, 3 underwent pre-graft expansion). We did not find statistically significant differences in age at the time of grafting or pre-surgical expansion when comparing the success and failure groups. We found the success rate of the graft to be 96.2%. Conclusions: The number of failures was too small to establish a statistically significant conclusion in our sample regarding the age at grafting and pre-grafting expansion. The use of alveolar bone grafting from the iliac crest has a very high success rate with a very low incidence of complications. Existing controversies regarding secondary bone grafting and the wide range of success rates found in the literature suggest that it is necessary to establish a specific treatment protocol that ensures the success of this procedure. Key words:Alveolar graft, cleft lip and palate, alveolar cleft, alveolar defect. PMID:24880440

  12. Reconstructive periodontal therapy with simultaneous ridge augmentation. A clinical and histological case series report.

    Science.gov (United States)

    Windisch, Péter; Szendroi-Kiss, Dóra; Horváth, Attila; Suba, Zsuzsanna; Gera, István; Sculean, Anton

    2008-09-01

    Treatment of intrabony periodontal defects with a combination of a natural bone mineral (NBM) and guided tissue regeneration (GTR) has been shown to promote periodontal regeneration in intrabony defects. In certain clinical situations, the teeth presenting intrabony defects are located at close vicinity of the resorbed alveolar ridge. In these particular cases, it is of clinical interest to simultaneously reconstruct both the intrabony periodontal defect and the resorbed alveolar ridge, thus allowing insertion of endosseous dental implants. The aim of the present study was to present the clinical and histological results obtained with a new surgical technique designed to simultaneously reconstruct the intrabony defect and the adjacently located resorbed alveolar ridge. Eight patients with chronic advanced periodontitis displaying intrabony defects located in the close vicinity of resorbed alveolar ridges were consecutively enrolled in the study. After local anesthesia, mucoperiosteal flaps were raised, the granulation tissue removed, and the roots meticulously scaled and planed. A subepithelial connective tissue graft was harvested from the palate and sutured to the oral flap. The intrabony defect and the adjacent alveolar ridge were filled with a NBM and subsequently covered with a bioresorbable collagen membrane (GTR). At 11-20 months (mean, 13.9+/-3.9 months) after surgery, implants were placed, core biopsies retrieved, and histologically evaluated. Mean pocket depth reduction measured 3.8+/-1.7 mm and mean clinical attachment level gain 4.3+/-2.2 mm, respectively. Reentry revealed in all cases a complete fill of the intrabony component and a mean additional vertical hard tissue gain of 1.8+/-1.8 mm. The histologic evaluation indicated that most NBM particles were surrounded by bone. Mean new bone and mean graft area measured 17.8+/-2.8% and 32.1+/-8.3%, respectively. Within their limits, the present findings indicate that the described surgical approach may be

  13. MRI of cerebral alveolar echinococcosis

    International Nuclear Information System (INIS)

    Tunaci, M.; Tunaci, A.; Engin, G.; Oezkorkmaz, B.; Ahishali, B.; Rozanes, I.

    1999-01-01

    Cerebral alveolar echinococcosis is rare. We report a case with multiple intracranial masses which show cauliflower-like contrast enhancement pattern on MRI. The lesions originated from hepatic involvement with invasion of the inferior vena cava. (orig.)

  14. Periapical abscess of the maxillary teeth and its fistulizations: Multi-detector CT study

    Directory of Open Access Journals (Sweden)

    Sherif A. Shama

    2013-09-01

    Full Text Available Aim: The aim of this study was to assess the role of MDCT and the dedicated dental software in assessment of the periapical abscesses of the maxillary teeth and in detection of abnormal fistula as well as post intervention complications. Materials and methods: This study was conducted on 20 patients with periapical abscess of the maxillary teeth. MDCT machines were used in examination of all patients. Workstation was used for manipulation of data. Dedicated dental software was used in the evaluation of all diseased teeth. Results: Fourteen patients had their abscesses involving the maxillary molar and premolar teeth, six of them showed associated oro-antral fistula (42.8%. Four patients had their abscesses surrounding the apices of the incisors, two of them showed associated oro-nasal fistula (50%. None of the patients with periapical abscesses surrounding the roots of the canine teeth (n = 2 showed abnormal fistulization. Nine cases (45% showed missing crowns and retained roots due to previous trials of extractions. Two cases (10% of fracture of the maxillary alveolar process complicating trials of previous extraction were also encountered. Conclusion: The MDCT with its outstanding image quality of the bony structures supported by its 3-D and VR capabilities can detect the periapical dental abscess in a 3-D fashion, accurately define its location, size and extent and is excellent in evaluation of possible fistula. As compared to panorama X-ray, MDCT was more accurate in diagnosis of abnormal fistula and associated fracture of the alveolar process of the maxillary bone. KEYWORDS: Periapical abscess, MDCT, Oro-antral fistula, Oro-nasal fistula

  15. Maxillary sinus carcinomas

    International Nuclear Information System (INIS)

    Jiang, G.L.; Ang, K.K.; Peters, L.J.; Wendt, C.D.; Oswald, M.J.; Goepfert, H.

    1991-01-01

    Between 1969 and 1985, 73 patients with maxillary sinus cancers underwent surgical excision and postoperative radiotherapy. The clinical stage distribution by the AJC system was 3T 1 , 16T 2 , 32T 3 and 22 T 4 . Six patients had palpable lymphadenopathy at diagnosis. Surgery for the primary tumor consisted of partial or radical maxillectomy, and if disease stage indicated it, ipsilateral orbital exenteration. This was followed by radiation treatment delivered through a wedge-pair or three-field technique. All but 3 patients received 50-60 Gy in 2 Gy fractions to an isodose line defining the target volume. Elective neck irradiation (ENI) was nor routinely given. Clinically involved nodes were treated with definitive radiotherapy (5 patients) or combined treatment (1 patient). Forty-five patients had no evidence of disease at the last follow-up. The 5-year relapse-free survival for the whole group was 51 percent. The overall local control rate was 78 percent, Patients with larger tumors, particularly if they also had histological signs of nerve invasion, had a higher recurrence rate than others. The overall nodal recurrence rate without ENI was 38 percent for squamous and undifferen-tiated carcinoma, and only 5 for adenoid cystic carcinomas. Therefore, the current recommendation is to deliver elective nodal irradiation routinely to patients with squamous or undifferentiated carcinoma, except for those who have T 1 lesions. Treatment complications were vision impairment, brain and bone necrosis, trismus, hearing loss, and pituitary insufficiency. The incidence of major side effects was determined by disease extent and treatment technique. Many technical refinements were introduced in order to limit the dose to normal tissues in an attempt to reduce the complication rate. To what extent such practice influences the outcome will be determined from subsequent analysis. (author). 23 refs.; 2 figs.; 5 tabs

  16. Ridge augmentation with soft tissue procedures in aesthetic dentistry: pre- and postoperative volume measurements with a new kind of moire technique

    Science.gov (United States)

    Studer, Stephan P.; Mueller, Ernst; Bucher, Alfred

    1993-09-01

    The aim of this paper was to measure the volume differences of operated alveolar ridge defects before and until 3 months post-surgically. Ten patients with ten localized alveolar ridge defects were operated on. Five alveolar ridge defects were corrected by using the full thickness onlay graft technique and the other five defects were operated by the subepithelial connective tissue graft technique. A strict standardized operation protocol was followed and all alveolar ridge defects were operated on by the same dental surgeon. Before as well as 1, 2, and 3 months after surgery the corrected defect was photographed and an impression was made by using an A-silicon material to produce a gypsum-cast model. The form of all these cast models was then measured using the moire technique. The three months result of ten cases shows that the form of the operated alveolar ridge defects, which were corrected by the subepithelial connective tissue graft technique are more stable compared to those which were operated on by the full thickness onlay graft technique. Localized alveolar ridge defects using the latter method does not show a form stability after 3 months post-surgically.

  17. Bilateral supernumerary primary maxillary canines

    Directory of Open Access Journals (Sweden)

    Santanu Mukhopadhyay

    2018-01-01

    Full Text Available Supernumerary teeth are more common in the permanent than in primary dentition. In the primary dentition, the anomaly is most frequently observed in the maxillary lateral incisor region, followed by the maxillary midline where they are termed as mesiodens. Supernumerary teeth in the primary canine region are rare. This paper describes a rare case of nonsyndromic supernumerary primary maxillary canine distributed bilaterally in a 4-year-old boy. Both the supernumeraries resembled size and shape of normal primary canine. The right supplemental canine is high labially placed, whereas the left one is seen normally aligned in the dental arch distal to lateral incisor. One of the most significant sequelae of primary supernumerary teeth is their duplication in the permanent series. Radiographic examination of supernumerary primary canine did not indicate any such anomaly in the permanent dentition. The patient was kept under observation.

  18. Vector alignment in maxillary distraction osteogenesis.

    Science.gov (United States)

    Uckan, Sina; Arman, Ayca; Bayram, Burak; Celik, Erkan

    2006-09-01

    Maxillary distraction osteogenesis is an alternative treatment of cleft patients with severe maxillary hypoplasia. The aim of this paper is to present the combined surgical/orthodontic treatment of a cleft lip and palate patient and to evaluate the maxillary distraction procedure and the distraction vector in high Le Fort I osteotomy.

  19. Maxillary Osteomyelitis: A Rare Entity

    Directory of Open Access Journals (Sweden)

    Ayaaz Habib

    2016-01-01

    Full Text Available Osteomyelitis of the maxilla is now a rare event with the advent of antibiotics. The two predominant causes are odontogenic infections and sinusitis. Immunocompromised states such as diabetes, HIV, and malnutrition increase the risk of osteomyelitis. It is important to recognize this early as it is a difficult entity to treat with potentially serious consequences. We report an unusual case of right sided maxillary osteomyelitis in a lady with poorly controlled diabetes in rural Lincolnshire. Biopsy of the right maxillary bone showed features of acute osteomyelitis. This responded well to a prolonged course of oral antibiotics.

  20. The Palatal Approach to Distraction Osteogenesis of the Anterior Maxillary Alveolus.

    Science.gov (United States)

    Bell, Robert E

    2015-07-01

    This report describes the palatal approach to gain access for osteodistraction of the anterior maxilla to improve the vector of force during distraction. This case report illustrates a novel approach to anterior maxillary osteodistraction. The palatal approach allows the maxillary segment to be moved anteriorly and inferiorly. This is in contrast to the buccal approach, in which the palatal tissue creates a vector of force toward the palate. The vascular pedicle for the transport segment is the labial mucosa and musculature. In the present case, the alveolar segment was advanced 3.6 mm anteriorly and 12.2 mm inferiorly as measured by pre- and postoperative computed tomograms. This patient with a large vertical alveolar defect and high smile line had successful restoration with dental implants. The result has been stable for 14 months. In this case, the palatal approach to the anterior maxillary osteotomy was shown to be an effective method of reconstructing a large vertical anterior defect. Copyright © 2015 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  1. Study of the relationship between the indication rod of stent on implant CT and the real path of implant fixture insertion considering residual ridge

    International Nuclear Information System (INIS)

    Kim, Do Hoon; Heo, Min Suk; Lee, Sam Sun; Oh, Sung Ook; Choi, Soon Chul; Choi, Hang Moon; Jeon, In Seong

    2003-01-01

    To assess the relationship between the direction of the indicating rod of the radiographic stent for ideal prosthetic design and the actual possible path of implant fixture placement when residual ridge resorption is considered. The study materials considered of 326 implant sites (male 214 cases and female 112 cases) from a total of 106 patients (male 65 patients and female 41 patients) who desired implant prostheses. Computed tomography of patients were taken and reformatted using ToothPix software. Bony defects, bony sclerosis, the change of the direction of indicating rod, and root proximity of the adjacent teeth were examined on the CT-derived images. The rate of the irregular crestal cortex was relatively high on premolar and molar area of maxilla. Mandibular molar area showed relatively high rate of focal sclerosis on the area of implant fixture insertion. The position of the including rods were relatively acceptable on the molar areas of both jaws. However, the position of the indicating rods should be shifted to buccal side with lingual rotation of the apical end on maxillary anterior teeth and premolar area. Clinically determined rod direction and position of the indicating rod for implant placement was not always acceptable for insertion according to the reformatted CT images. The pre-operative treatment plan for implant should be determined carefully, considering the state of the alveolar bone using the reformatted CT images.

  2. The width of the incisive canal and labial alveolar bone of the incisive canal: an assessment on CT images

    International Nuclear Information System (INIS)

    Roh, Yang Gyun; Jang, Hyun Seon; Kim, Byung Ock; Kim, Jin Soo

    2006-01-01

    To assess the width of the labial alveolar bone of the incisive canal and the width of the incisive canal on spiral computed tomographic images of the anterior portion of the maxilla. Study materials included 38 CT scans taken for preoperative planning of implant placement. Axial cross-sectioned image entirely showing the incisive canal at an orifice to the oral cavity, middle portion, and an orifice to the nasal cavity and the diameter of the incisive canal at the middle portion were determined by two specialist using Digora for Windows 2.1. The statistical analyses were carried out using SPSS 12.0.1. When the maxillary central incisors remained, the mean labial alveolar bone width were 6.81±1.41 mm, 6.46±1.33 mm, and 7.91±1.33 mm. When the maxillary central incisors were missed the mean width were 5.42±2.20 mm, 6.23±2.29 mm, and 7.89±2.13 mm. The labial alveolar bone width at middle portion and an orifice to the nasal cavity were of no statistical significant difference according to presence of the maxillary central incisors (P>0.05). The width between oral cavity and nasal cavity, middle portion and to masal cavity revealed statistically significant difference (P<0.05)

  3. Maxillary tridimensional changes after slow expansion with leaf expander in a sample of growing patients: a pilot study.

    Science.gov (United States)

    Lanteri, V; Gianolio, A; Gualandi, G; Beretta, M

    2018-03-01

    The aim of this study is to evaluate the dento-alveolar effects of slow maxillary expansion using the Leaf Expander in a sample of growing patients with maxillary transverse deficiency, unilateral cross bite and mandibular shift. The study included 10 patients, 3 male and 7 female (mean age 7.5 + 7 months), treated with Leaf Expander anchored on the upper deciduous teeth. Digital models were obtained by a lab scan of the pvs impressions at the beginning of the therapy (T1) and at the removal of the palatal expander (T2). Five parameters were measured: 1) the distance between the first upper permanent molars; 2) the distance between the upper second deciduous molars; 3) the distance between the upper canine cusps 4) the distance between the first lower permanent molars; 5) the distance of the lower canine cusps. In all patients complete correction of posterior crossbite was achieved on average in 4 months, with a spontaneous expansion of the upper first permanent molars. Significant increases in the dento-alveolar transversal diameters were obtained. Increases were also observed in the anterior mandibular arch diameter (+ 1 mm). These findings suggest that slow maxillary expansion using Leaf Expander appliance could be a reasonable alternative to conventional maxillary expansion therapy in the early mixed dentition.

  4. Treatment of sharp mandibular alveolar process with hybrid prosthesis

    Directory of Open Access Journals (Sweden)

    Sukaedi Sukaedi

    2010-09-01

    Full Text Available Background: Losing posterior teeth for a long time would occasionally lead to the sharpening of alveolar process. The removable partial denture usually have problems when used during mastication, because of the pressure on the mucosa under the alveolar ridge. Purpose: The purpose of this case report was to manage patients with sharp mandibular alveolar process by wearing hybrid prosthesis with extra coronal precision attachment retention and soft liner on the surface base beneath the removable partial denture. Case: A 76 years old woman visited the Prosthodontic Clinic Faculty of Dentistry Airlangga University. The patient had a long span bridge on the upper jaw and a free end acrylic removable partial denture on the lower jaw. She was having problems with mastication. The patient did not wear her lower denture because of the discomfort with it during mastication. Hence, she would like to replace it with a new removable partial denture. Case management: The patient was treated by wearing a hybrid prosthesis with extra coronal precision attachment on the lower jaw. Soft liner was applied on the surface of the removable partial denture. Hybrid prosthesis is a complex denture consisting of removable partial denture and fixed bridge. Conclusion: It concluded that after restoration, the patient had no problems with sharp alveolar process with her new denture, and she was able to masticate well.Latar belakang: Kehilangan geligi posterior dapat menimbulkan processus alveolaris tajam. Gigi tiruan sebagian lepasan mempunyai masalah selama pengunyahan karena adanya tekanan di mukosa di bawah alveolar ridge. Tujuan: Tujuan laporan kasus ini adalah untuk menjelaskan cara menangani pasien yang mempunyai prosesus alveolaris yang tajam di rahang bawah dengan dibuatkan protesis hybrid dengan daya tahan extra coronal precision attachment dan soft liner di permukaan bawah basis gigi tiruan sebagian lepasan. Kasus: Pasien wanita berumur 76 tahun datang di klinik

  5. Maxillary complete denture outcome with two-implant supported mandibular overdentures. A systematic review.

    Science.gov (United States)

    Rutkunas, Vygandas; Mizutani, Hiroshi; Peciuliene, Vytaute; Bendinskaite, Ruta; Linkevicius, Tomas

    2008-01-01

    Research data regarding maxillary complete denture outcome with two-implant supported mandibular overdentures are not consistent. Considering multiple publications on implant supported mandibular overdentures, it was decided to summarize currently present evidence on the maxillary complete dentures opposed by implant-supported mandibular overdentures, and analyze factors that could potentially influence the outcomes. The articles from 1985 to 2007 related to the topic were identified in the online MEDLINE/Pubmed and other databases and manually. Primary articles were scanned, and irrelevant studies were excluded from the further review process. Potentially relevant titles and abstracts were provisionally included for consideration on the basis of full text articles. Full text articles were obtained from on-line and printed sources. The data from the studies were extracted and reviewed. The study has failed to identify any prospective satisfying inclusion/exclusion criteria RCT reporting on maxillary bone resorption. The number of maxillary complete denture relining incidences per patient was constantly increasing during the 10-year period. Maxillary complete denture remake incidences comprised 16-33 % of the number of patients followed during the 10-year period. Comparing patient satisfaction with upper dentures at the baseline and after two years, no decrease in satisfaction was noticed. There is no evidence that maxillary ridge resorption is accelerated with certain types of two-implant supported mandibular overdenture attachments. Most common complication for the maxilla - prosthetic maintenance. There is a risk of decreased patient satisfaction with bar-supported mandibular overdenture. Further studies are needed to provide evidence for the maxillary complete denture outcome with two-implant supported mandibular overdentures.

  6. Reconstruction of a Post Traumatic Anterior Maxillary Defect by Transport Distraction Osteogenesis.

    Science.gov (United States)

    Rajkumar, K; Neelakandan, R S; Devadoss, Pradeep; Bandyopadhyay, T K

    2017-03-01

    Rehabilitation of segmental defects of maxilla presents a reconstructive challenge to obtain an ideal osseous form and height with adequate soft tissue investment. Though variety of prosthetic and surgical reconstructive options like the use of vascularized and non vascularized bone grafts are available they produce less than optimal results. Bone transport distraction is a reliable procedure in various maxillofacial bony defect reconstruction techniques. We describe herein a technique of maxillary bone transport distraction using an indigenously designed, custom made trifocal transport distractor performed in a post traumatic avulsive defect of the anterior maxilla. Transport distraction was successful for anterior maxillary alveolar bony regeneration, with excellent soft tissue cover and vestibular depth, which also helped close an oroantral/oronasal fistula.

  7. Multiple myeloma presenting with a maxillary lesion as the first sign

    Energy Technology Data Exchange (ETDEWEB)

    Ramaiah, Kiran Kumar Kotagudda; Joshi, Vajendra; Thayi, Shilpa Ravishankar; Sathyanarayana, Pathalapate; Patil, Prashant [Dept. of Oral Medicine and Radiology, Navodaya Dental College and Hospital, Raichur (Korea, Republic of); Ahmed, Zaheer [Dept. of Public Health Dentistry, Navodaya Dental College and Hospital, Raichur (Korea, Republic of)

    2015-03-15

    Multiple myeloma is a clonal neoplastic proliferation of terminally differentiated B-lymphocytes involving the skeletal system in a multifocal fashion. Its oral manifestations are less common in the maxilla than in the mandible due to the lower amount of hemopoietic bone marrow in the maxilla. We report the case of a 50-year-old man who presented with a mass in the left maxillary alveolar region with tooth mobility. The mass had become enlarged after the teeth were extracted 15 days previously. Radiographs demonstrated multiple punched-out radiolucent lesions in the skull and pelvic region. Computed tomography images showed a soft tissue density mass in the left maxilla, eroding the floor and walls of the maxillary sinus. Although several analytical techniques were used to characterize the lesion, it was finally confirmed as multiple myeloma through immunohistochemistry.

  8. Sensory action potentials of the maxillary nerve: a methodologic study with clinical implications

    DEFF Research Database (Denmark)

    Thygesen, Torben; Baad-Hansen, Lene; Svensson, Peter

    2009-01-01

    PURPOSE: Recently, recording of sensory nerve action potentials (SNAPs) of the inferior alveolar nerve (IAN) was described and is used as a diagnostic test of traumatic neuropathic trigeminal disorders. The technique is limited to IAN damage; therefore, we adapted the technique to the maxillary...... nerve, which is also frequently injured by either trauma or orthognathic surgery. PATIENTS AND METHODS: Fourteen healthy volunteers participated in this methodologic study in which the infraorbital nerve (ION) was stimulated with 2 needle electrodes. The SNAPs were recorded from the maxillary nerve...... difference. Repeated tests within a session test demonstrated no significant differences in the latency data (ANOVA: P= .225) or amplitude data (ANOVA: P= .44). Stimulus-response curves indicated that the SNAPs saturated at 5.1+/-4.4 mA stimulus intensity. In 1 subject, stimulation of the mental nerve...

  9. Treatment of Severe Maxillary Hypoplasia With Combined Orthodontics and Distraction Osteogenesis.

    Science.gov (United States)

    Lucchese, Alessandra; Albertini, Paolo; Asperio, Paolo; Manuelli, Maurizio; Gastaldi, Giorgio

    2018-01-05

    Distraction osteogenesis (DO) is a technique that allows the generation of new bone in a gap between 2 vascularized bone surfaces in response to the application of graduated tensile stress across the bone gap.Distraction osteogenesis has become a routine treatment of choice to correct skeletal deformities and severe bone defects in the craniofacial complex over the past decade. Distraction osteogenesis has been successfully chosen in lengthening the maxilla and the mandible; in the maxilla and recently in the mandible, the jawbones have been distracted and widened transversely to relieve severe anterior dental crowding and transverse discrepancies between the dental arches.Distraction osteogenesis for maxillary advancement started in 1993 and is now widely used, especially in patients with skeletal Class III malocclusion caused by maxillary hypoplasia.The aim of this study was to present the efficiency of combined orthodontic and DO in the severe maxillary hypoplasia.A 35-year-old Italian man presented to our clinical practice with the chief complaint of esthetic and functionally problems because of skeletal Class III malocclusion with anterior crossbite.Considering that the severity of the skeletal discrepancy is remarkable but compensated by the DO potential, the combined orthodontic and DO treatment was considered adequate, like less invasive and equally effective.It was obtained a good alignment with the upper and lower arch dental alveolar maxillary advancement that allowed to correct the sagittal relationships.The patient was satisfied for the treatment results and had considerable improvement in his self-esteem.

  10. Root length and alveolar bone level of impacted canines and adjacent teeth after orthodontic traction: a long-term evaluation

    Science.gov (United States)

    da SILVA, Aldir Cordeiro; CAPISTRANO, Anderson; de ALMEIDA-PEDRIN, Renata Rodrigues; CARDOSO, Maurício de Almeida; CONTI, Ana Cláudia de Castro Ferreira; CAPELOZZA, Leopoldino

    2017-01-01

    Abstract Objective The aim of this retrospective study was to evaluate the long-term effects of orthodontic traction on root length and alveolar bone level in impacted canines and adjacent teeth. Material and Methods Sample consisted of 16 patients (nine males and seven females), mean initial age 11 years and 8 months presenting with unilaterally maxillary impacted canines, palatally displaced, treated with the same surgical and orthodontic approach. Teeth from the impacted-canine side were assigned as Group I (GI), and contralateral teeth as control, Group II (GII). The mean age of patients at the end of orthodontic treatment was 14 years and 2 months and the mean post-treatment time was 5 years and 11 months. Both contralateral erupted maxillary canines and adjacent teeth served as control. Root length and alveolar bone level (buccal and palatal) were evaluated on cone-beam computed tomography (CBCT) images. The comparison of root length and alveolar bone level changes between groups were assessed by applying paired t-test, at a significance level of 5% (p<0.05). Results There were no statistically significant differences in root length and buccal and palatal bone levels of canines and adjacent teeth among groups. Conclusions Impacted canine treatment by closed-eruption technique associated with canine crown perforation, has a minimal effect on root length and buccal and palatal alveolar bone level in both canine and adjacent teeth, demonstrating that this treatment protocol has a good long-term prognosis. PMID:28198979

  11. [Finite element analysis of the maxillary central incisor with crown lengthening surgery and post-core restoration in management of crown-root fracture].

    Science.gov (United States)

    Zhen, Min; Hu, Wen-jie; Rong, Qi-guo

    2015-12-18

    To construct the finite element models of maxillary central incisor and the simulations with crown lengthening surgery and post-core restoration in management of different crown-root fracture types, to investigate the stress intensity and distributions of these models mentioned above, and to analyze the indications of crown lengthening from the point of view of mechanics. An extracted maxillary central incisor and alveolar bone plaster model were scanned by Micro-CT and dental impression scanner (3shape D700) respectively. Then the 3D finite element models of the maxillary central incisor and 9 simulations with crown lengthening surgery and post-core restoration were constructed by Mimics 10.0, Geomagic studio 9.0 and ANSYS 14.0 software. The oblique static force (100 N) was applied to the palatal surface (the junctional area of the incisal 1/3 and middle 1/3), at 45 degrees to the longitudinal axis, then the von Mises stress of dentin, periodontal ligament, alveolar bone, post and core, as well as the periodontal ligament area, were calculated. A total of 10 high-precision three-dimensional finite element models of maxillary central incisor were established. The von Mises stress of models: post>dentin>alveolar bone>core>periodontal ligament, and the von Mises stress increased linearly with the augmentation of fracture degree (besides the core). The periodontal ligament area of the crown lengthening was reduced by 12% to 33%. The von Mises stress of periodontal ligament of the B2L2c, B2L3c, B3L1c, B3L2c, B3L3c models exceeded their threshold limit value, respectively. The maxillary central incisors with the labial fracture greater than three-quarter crown length and the palatal fracture deeper than 1 mm below the alveolar crest are not the ideal indications of the crown lengthening surgery.

  12. Bone changes in ridge split with immediate implant placement: A systematic review

    Directory of Open Access Journals (Sweden)

    Mohamed M. Dohiem

    2015-12-01

    Conclusion: Alveolar ridge splitting might be considered a predictable approach that demonstrates a high implant survival rate, adequate horizontal bone gain and minimal postoperative complications. Weak evidence showed the effect of flap design and immediate implantation on marginal bone loss and survival rate.

  13. Quantitative analysis of the relationship between maxillary incisors and the incisive canal by cone-beam computed tomography in an adult Japanese population

    Directory of Open Access Journals (Sweden)

    Tomonari Matsumura

    2017-08-01

    Full Text Available Abstract Background In setting goals for orthodontic treatment, determining the morphologies of the alveolar bone and maxillary incisor root is important for avoiding root resorption, dehiscence, and fenestration. This study aimed to analyze the configurational relationships among maxillary incisors, the alveolar border, and the incisive canal by cone-beam computed tomography (CBCT. Methods Cone-beam CT images of 93 orthodontic patients were evaluated for length of the incisive canal (L; angles between the palatal plane and the maxillary alveolar border (θ1, the incisive canal (θ2, and maxillary incisor (θ3; distance from the left maxillary incisor to the incisive canal (D; and cross-sectional areas of the incisive canal (CSAs at three vertical levels. Comparison of variables between male and female patients was performed with the two-sample t test. Correlations between parameters were examined by Pearson’s correlation analysis and Bonferroni correction for multiple comparisons. Results Male patients exhibited significantly greater values of L than female patients. There were significant positive correlations between θ1 and θ2, θ2 and θ3, and θ3 and θ1. While the value of D was the lowest at the oral opening, that of the cross-sectional area of the incisive canal (CSA was the greatest at the incisal root apex. Conclusions This study demonstrated that the incisive canal had large inter-individual variability, and the proximity between the incisive canal and the incisal root could not be precisely predicted by the conventional cephalograms. Therefore, pre-treatment CBCT examination should be recommended when a large amount of maxillary anterior retraction and/or intrusion is planned in orthodontic diagnosis.

  14. True Fibroma of Alveolar Mucosa

    Directory of Open Access Journals (Sweden)

    Shankargouda Patil

    2014-01-01

    Full Text Available Benign fibrous overgrowths are often found in the oral cavity, almost always being reactive/irritational in nature. However, benign mesenchymal neoplasms of the fibroblasts are extremely uncommon. Here we report a case of “True Fibroma of Alveolar Mucosa” for its rarity.

  15. Intravascular bronchio-alveolar tumor

    International Nuclear Information System (INIS)

    Mata, J.M.; Caceres, J.; Prat, J.; Lopez, J.I.; Velilla, O.

    1991-01-01

    In 1975 Dail and Liebow described the clinical and pathological characteristics of a pulmonary tumor which they dominated intravascular bronchio-alveolar tumor (IVBAT). Our aim is to acquaint radiologists with the existence of this tumor by describing the radiologic findings in 2 patients with IVBAT, 1 with hepatic involvement ant the other with pulmonary osteoarthropathy. (author). 7 refs.; 2 figs

  16. Evaluation of the Effect of Platelet-Rich Plasma on Alveolar Wound Healing in Rats

    OpenAIRE

    Yamamoto, Marcos Kazuo; Novelli, Moacyr Domingos; Corrêa, Luciana; de Sousa, Suzana Cantanhede M; Luz, João Gualberto C

    2017-01-01

    Opinions about the clinical utility of platelet-rich plasma (PRP) vary, as a large number of experimental studies have questioned its efficacy. The purpose of this study was to evaluate the effects of PRP on experimental alveolar wound healing in rats. Fifty young adult male Wistar rats were divided in control and PRP groups and submitted to extraction of the right maxillary incisor. In the PRP group, blood was collected by cardiac puncture, and the socket was filled with a PRP gel. Animals w...

  17. Radiation-induced maxillary cancer

    International Nuclear Information System (INIS)

    Haguma, Naoyuki; Shirane, Makoto; Hirakawa, Katsuhiro; Suzuki, Mamoru; Yajin, Kouji; Harada, Yasuo

    1990-01-01

    A maxillary cancer (T 2 N 0 M 0 ) recurred twice, five years and 18 years after the initial therapy. The first therapy was continuous intra-arterial infusion of 5-FU (5700 mg) and irradiation (50 Gy). The second therapy was intravenous infusion of 5-FU (4500 mg) and irradiation (46 Gy). The third therapy was partial maxillectomy and LASER cauterization. In this particular case local inflammation due to remaining food and repeated irradiation might have been responsible for the recurrences. (author)

  18. Nasopharyngeal cancer through maxillary swing

    International Nuclear Information System (INIS)

    Pacheco Ojeda, Luis; Chicaiza Acosta, Jorge; Ulloa Miranda, Darwin

    2006-01-01

    Nasopharyngeal cancer is very rare in Ecuador. Radiotherapy associated to concurrent chemotherapy is currently the standard treatment. In case of tumor recurrence, these two treatment modalities are usually not effective. For this reason, several studies about the satisfactory results of salvage surgery in terms of locoregional control of the disease, have appeared recently in the literature. We report our first experience of surgical salvage resection of a recurrent tumor through an anterolateral approach (maxillary swing) with an initial satisfactory result. (The author)

  19. Skeletal response to maxillary protraction with and without maxillary expansion: a finite element study.

    Science.gov (United States)

    Gautam, Pawan; Valiathan, Ashima; Adhikari, Raviraj

    2009-06-01

    The purpose of this finite element study was to evaluate biomechanically 2 treatment modalities-maxillary protraction alone and in combination with maxillary expansion-by comparing the displacement of various craniofacial structures. Two 3-dimensional analytical models were developed from sequential computed tomography scan images taken at 2.5-mm intervals of a dry young skull. AutoCAD software (2004 version, Autodesk, San Rafael, Calif) and ANSYS software (version 10, Belcan Engineering Group, Cincinnati, Ohio) were used. The model consisted of 108,799 solid 10 node 92 elements, 193,633 nodes, and 580,899 degrees of freedom. In the first model, maxillary protraction forces were simulated by applying 1 kg of anterior force 30 degrees downward to the palatal plane. In the second model, a 4-mm midpalatal suture opening and maxillary protraction were simulated. Forward displacement of the nasomaxillary complex with upward and forward rotation was observed with maxillary protraction alone. No rotational tendency was noted when protraction was carried out with 4 mm of transverse expansion. A tendency for anterior maxillary constriction after maxillary protraction was evident. The amounts of displacement in the frontal, vertical, and lateral directions with midpalatal suture opening were greater compared with no opening of the midpalatal suture. The forward and downward displacements of the nasomaxillary complex with maxillary protraction and maxillary expansion more closely approximated the natural growth direction of the maxilla. Displacements of craniofacial structures were more favorable for the treatment of skeletal Class III maxillary retrognathia when maxillary protraction was used with maxillary expansion. Hence, biomechanically, maxillary protraction combined with maxillary expansion appears to be a superior treatment modality for the treatment of maxillary retrognathia than maxillary protraction alone.

  20. In vivo microcomputed tomography evaluation of rat alveolar bone and root resorption during orthodontic tooth movement.

    Science.gov (United States)

    Ru, Nan; Liu, Sean Shih-Yao; Zhuang, Li; Li, Song; Bai, Yuxing

    2013-05-01

    To observe the real-time microarchitecture changes of the alveolar bone and root resorption during orthodontic treatment. A 10 g force was delivered to move the maxillary left first molars mesially in twenty 10-week-old rats for 14 days. The first molar and adjacent alveolar bone were scanned using in vivo microcomputed tomography at the following time points: days 0, 3, 7, and 14. Microarchitecture parameters, including bone volume fraction, structure model index, trabecular thickness, trabecular number, and trabecular separation of alveolar bone, were measured on the compression and tension side. The total root volume was measured, and the resorption crater volume at each time point was calculated. Univariate repeated measures analysis of variance with Bonferroni corrections were performed to compare the differences in each parameter between time points with significance level at P Root resorption volume of the mesial root increased significantly on day 7 of orthodontic loading. Real-time root and bone resorption during orthodontic movement can be observed in 3 dimensions using in vivo micro-CT. Alveolar bone resorption and root resorption were observed mostly in the apical third on day 7 on the compression side; bone formation was observed on day 14 on the tension side during orthodontic tooth movement.

  1. [Presurgical alveolar molding using computer aided design in infants with unilateral complete cleft lip and palate].

    Science.gov (United States)

    Zgong, Xin; Yu, Quan; Yu, Zhe-yuan; Wang, Guo-min; Qian, Yu-fen

    2012-04-01

    To establish a new method of presurgical alveolar molding using computer aided design(CAD) in infants with complete unilateral cleft lip and palate (UCLP). Ten infants with complete UCLP were recruited. A maxillary impression was taken at the first examination after birth. The study model was scanned by a non-contact three-dimensional laser scanner and a digital model was constructed and analyzed to simulate the alveolar molding procedure with reverse engineering software (RapidForm 2006). The digital geometrical data were exported to produce a scale model using rapid prototyping technology. The whole set of appliances was fabricated based on these solid models. The digital model could be viewed and measured from any direction by the software. By the end of the NAM treatment before surgical lip repair, the cleft was narrowed and the malformation of alveolar segments was aligned normally, significantly improving nasal symmetry and nostril shape. Presurgical NAM using CAD could simplify the treatment procedure and estimate the treatment objective, which enabled precise control of the force and direction of the alveolar segments movement.

  2. Alveolar inflammation in cystic fibrosis

    DEFF Research Database (Denmark)

    Ulrich, Martina; Worlitzsch, Dieter; Viglio, Simona

    2010-01-01

    and ceramide accumulation. We sought to investigate CF lung inflammation in the alveoli. METHODS: Lung tissue from 14 CF patients and four healthy individuals was analyzed for numbers of effector cells, elastin and collagen concentrations, inflammatory markers and density of Pseudomonas aeruginosa....... Additionally, desmosine and isodesmosine concentrations were determined in 52 urine specimens from CF patients to estimate the burden of elastase activities in respiratory secretions. RESULTS: Elastin concentration was significantly decreased and collagen significantly increased in CF alveolar tissues...... as compared to age-matched, healthy individuals. Elastin split products were significantly increased in urine samples from patients with CF and correlated inversely with age, indicating local tissue remodelling due to elastin degradation by unopposed proteolytic enzymes. Alveolar inflammation was also...

  3. Maxillary sinus agenesis - report of two cases

    International Nuclear Information System (INIS)

    Pierre, Jorge Henrique Arraes de Alencar; Santana, Expedito Araujo

    2000-01-01

    Agenesis or aplasia of the maxillary sinuses is an extremely rare condition, and only eight cases have been reported in the world medical literature. These malformations may arise as a result of developmental defects. Two cases of unilateral agenesis of the maxillary sinus are presented and the radiological abnormalities and the embryology are discussed. The literature is also reviewed. (author)

  4. Assessment of Alveolar Bone Status in Middle Aged Chinese (40-59 Years) with Chronic Periodontitis--Using CBCT.

    Science.gov (United States)

    Zhao, Haijiao; Li, Chen; Lin, Li; Pan, Yaping; Wang, Hongyan; Zhao, Jian; Tan, Lisi; Pan, Chunling; Song, Jia; Zhang, Dongmei

    2015-01-01

    This study used con-beam computed tomography (CBCT) to investigate the prevalence and severity of alveolar bone loss in middle-aged (40-59 years) Chinese with chronic periodontitis. The study group comprised 145 dentate individuals aged 40 to 59 years residing in China who suffered from chronic periodontitis. CBCT and the application of NNT software were used to examine the level and location of alveolar bone loss. The study revealed that 40-59 year old patients with chronic periodontitis had severe bone loss. At 5,286 sites (34.7%), alveolar bone loss was mild; severe alveolar bone loss was found at 5,978 sites (39.2%). A comparison of bone loss in different jaws revealed that the area with the highest degree of bone loss was on the lingual side of the maxillary molar (56.3 ± 7.2%), and that the area with the lowest degree was primarily on the lingual side of the mandibular canine (27.5 ± 6.3%). There was a lower degree of alveolar bone loss in males than females. Differences were observed when comparing the incidence of bone loss between males and females (P chronic periodontitis, the highest degrees of bone loss in the incisors, premolars, and molars were on the lingual side, mesial side and lingual side, respectively. Menopause in females and smoking may affect the level of bone loss.

  5. Ridge Regression Signal Processing

    Science.gov (United States)

    Kuhl, Mark R.

    1990-01-01

    The introduction of the Global Positioning System (GPS) into the National Airspace System (NAS) necessitates the development of Receiver Autonomous Integrity Monitoring (RAIM) techniques. In order to guarantee a certain level of integrity, a thorough understanding of modern estimation techniques applied to navigational problems is required. The extended Kalman filter (EKF) is derived and analyzed under poor geometry conditions. It was found that the performance of the EKF is difficult to predict, since the EKF is designed for a Gaussian environment. A novel approach is implemented which incorporates ridge regression to explain the behavior of an EKF in the presence of dynamics under poor geometry conditions. The basic principles of ridge regression theory are presented, followed by the derivation of a linearized recursive ridge estimator. Computer simulations are performed to confirm the underlying theory and to provide a comparative analysis of the EKF and the recursive ridge estimator.

  6. Surgically assisted rapid maxillary expansion in adults.

    Science.gov (United States)

    Pogrel, M A; Kaban, L B; Vargervik, K; Baumrind, S

    1992-01-01

    Twelve adults with maxillary width discrepancy of greater than 5 mm were treated by surgically assisted rapid maxillary expansion. The procedure consisted of bilateral zygomatic buttress and midpalatal osteotomies combined with the use of a tooth-borne orthopedic device postoperatively. Mean palatal expansion of 7.5 mm (range of 6 to 13 mm), measured in the first molar region, was achieved within 3 weeks in all patients. Expansion remained stable during the 12-month study period, with a mean relapse for the entire group of 0.88 +/- 0.48 mm. Morbidity was limited to mild postoperative discomfort. The results of this preliminary study indicated that surgically assisted rapid maxillary expansion is a safe, simple, and reliable procedure for achieving a permanent increase in skeletal maxillary width in adults. Further study is necessary to document the three-dimensional movements of the maxillary segments and long-term stability of the skeletal and dental changes.

  7. Fetal and neo-natal maxillary ontogeny in extant humans and the utility of prenatal maxillary morphology in predicting ancestral affiliation

    Science.gov (United States)

    Nicholas, Christina L.

    2016-01-01

    Objectives The midface of extant H. sapiens is known to undergo shape changes through fetal and neo-natal ontogeny; however, little work has been done to quantify these shape changes. Further, while midfacial traits which vary in frequency between populations of extant humans are presumed to develop prenatally, patterns of population-specific variation maxillary shape across ontogeny are not well documented. Only one study of fetal ontogeny which included specific discussion of the midface has taken a 3D geometric morphometric approach, and that study was limited to one population (Japanese). The present research project seeks to augment our understanding of fetal maxillary growth patterns, most especially in terms of intraspecific variation. Materials and Methods Three-dimensional coordinate landmark data were collected on the right maxillae of 102 fetal and neo-natal individuals from three groups (Euro-American, African-American, “Mixed Ancestry”). Results Shape changes were seen mainly in the lateral wall of the piriform aperture, the anterior nasal spine, and the subnasal alveolar region. The greatest difference across age groups (2nd Trimester, 3rd Trimester, Neonates) was between the second and third trimester. Euro-Americans and African-Americans clustered by population and differences in midfacial morphology related to ancestry could be discerned as early as the second trimester (p=0.002), indicating that population variation in maxillary morphology appears very early in ontogeny. Discussion The midface is a critical region of the skull for assessing ancestry and these results indicate that maxillary morphology may be useful for estimating ancestry for prenatal individuals as young as the second trimester. PMID:27412693

  8. A novel pre-surgical maxillary orthodontic device using β-titanium wire for wide unilateral cleft lip and palate patients: preliminary study of its efficacy and impact for the maxillary formation.

    Science.gov (United States)

    Taniguchi, Maki; Oyama, Tomoki; Kiya, Koichiro; Sone, Yumiko; Ishii, Nobuyuki; Hosokawa, Ko

    2014-02-01

    For patients with a wide, complete, unilateral cleft lip and palate, pre-surgical maxillary orthodontic treatments have been used to reduce the alveolar gap before cheiloplasty. However, most of these treatments are complicated and laborious for patients and for medical professionals. Thus, we developed an original pre-surgical orthodontic device made with two separate acrylic resin plates connected with a spring-shaped β-titanium wire (β-TW). When the device was applied on the palate, each segment of the maxilla was automatically aligned for our target formation with the elastic force of β-titanium alloy. This study aimed to evaluate the efficacy of the new device and the size of the maxilla in comparison with the conventional Hotz procedures. A total of 47 patients with a wide unilateral cleft lip and palate were retrospectively evaluated; 33 patients were treated with our new device (β-TW plate group) and 14 were treated with a Hotz plate (HP group). We evaluated the alveolar gap reduction and the size of the maxilla between the two groups, obtaining intraoral maxillary impressions at birth, at 3 months and 1 year. The width of the alveolar gap in the β-TW plate group was significantly reduced compared with that in the HP group 1 month after the treatment (p pre-surgical orthodontic treatments. Copyright © 2013 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

  9. Soft tissue expansion before vertical ridge augmentation: Inflatable silicone balloons or self-filling osmotic tissue expanders?

    Directory of Open Access Journals (Sweden)

    Prasad Vijayrao Dhadse

    2014-01-01

    Full Text Available Recent advances in periodontal plastic surgical procedures allow the clinician to reconstruct deficient alveolar ridges in more predictable ways than previously possible. Placement of implant/s in resorbed ridges poses numerous challenges to the clinician for successful esthetic and functional rehabilitation. The reconstruction frequently utilizes one or combination of periodontal plastic surgical procedures in conjunction with autogenous bone grafting, allogenic bone block grafting, ridge split techniques, distraction osteogenesis, or guided bone regeneration (GBR for most predictable outcomes. Current surgical modalities used in reconstruction of alveolar ridge (horizontal and/or vertical component often involve the need of flap transfer. Moreover, there is compromise in tissue integrity and color match owing to different surgical site and the tissue utilized is insufficient in quantity leading to post surgical graft exposition and/or loss of grafted bone. Soft tissue expansion (STE by implantation of inflatable silicone balloon or self filling osmotic tissue expanders before reconstructive surgery can overcome these disadvantages and certainly holds a promise for effective method for generation of soft tissue thereby achieving predictable augmentation of deficient alveolar ridges for the implant success. This article focuses and compares these distinct tissue expanders for their clinical efficacy of achieving excess tissue that predominantly seems to be prerequisite for ridge augmentation which can be reasonably followed by successful placement of endosseous fixtures.

  10. Implant-retained maxillary overdentures.

    Science.gov (United States)

    Eckert, Steven E; Carr, Alan B

    2004-07-01

    Overdentures supported by osseointegrated implants overcome many of the complications observed with overdentures supported by natural teeth. Dental implants are free of biologic consequences associated with natural teeth, such as dental caries and periodontal disease. Bone undercuts adjacent to implants do not mimic those found adjacent to natural tooth roots. Implants are used to provide predictable retention, support, and stability for overdenture prostheses. When lip or facial support is required, the overdenture is the treatment of choice. Likewise the overdenture may improve phonetic deficiencies associated with alveolar bone loss.

  11. Dentoskeletal outcomes of a rapid maxillary expander with differential opening in patients with bilateral cleft lip and palate: A prospective clinical trial

    Science.gov (United States)

    Garib, Daniela; De Cássia Moura Carvalho Lauris, Rita; Calil, Louise Resti; De Medeiros Alves, Arthur César; Janson, Guilherme; De Almeida, Araci Malagodi; Cevidanes, Lúcia Helena Soares; Lauris, José Roberto Pereira

    2017-01-01

    Introduction The purpose of this 2-arm parallel study was to evaluate the dentoskeletal effects of rapid maxillary expansion with differential opening (EDO) compared with the hyrax expander in patients with complete bilateral cleft lip and palate. Methods A sample of patients with complete bilateral cleft lip and palate was prospectively and consecutively recruited. Eligibility criteria included participants in the mixed dentition with lip and palate repair performed during early childhood and maxillary arch constriction with a need for maxillary expansion before the alveolar bone graft procedure. The participants were consecutively divided into 2 study groups. The experimental and control groups comprised patients treated with rapid maxillary expansion using EDO and the hyrax expander, respectively. Cone-beam computed tomography examinations and digital dental models of the maxillary dental arches were obtained before expansion and 6 months postexpansion. Standardized cone-beam computed tomography coronal sections were used for measuring maxillary transverse dimensions and posterior tooth inclinations. Digital dental models were used for assessing maxillary dental arch widths, arch perimeters, arch lengths, palatal depths, and posterior tooth inclinations. Blinding was used only during outcome assessment. The chi-square test was used to compare the sex ratios between groups (P <0.05). Intergroup comparisons were performed using independent t tests with the Bonferroni correction for multiple tests. Results Fifty patients were recruited and analyzed in their respective groups. The experimental group comprised 25 patients (mean age, 8.8 years), and the control group comprised 25 patients (mean age, 8.6 years). No intergroup significant differences were found for age, sex ratio, and dentoskeletal variables before expansion. No significant differences were found between the EDO and the hyrax expander groups regarding skeletal changes. The EDO promoted significantly

  12. Implantation of the maxillary antrum for delivery of iridium brachytherapy and microwave induced hyperthermia

    International Nuclear Information System (INIS)

    Coughlin, C.T.; Wong, T.Z.; Geurkink, N.

    1985-01-01

    A 63 year-old male was referred tp Dartmouth in March 1984 for a locally advanced recurrent squamous cell carcinoma of the left maxillary antrum. This had been initially diagnosed in January 1983 by a Caldwell-Luc procedure and had failed partial resection, external radiation therapy, and multiagent chemotherapy. Our initial evaluation revealed disease replacing the left maxillary antrum, extending into the pterygomaxillary fossa, the lateral aspect of the superior alveloar ridge, and into the soft palate. He was taken to the operating room and under general anesthesia was implanted the 7 catheters through this tumor volume. Two days later a therapeutic (>42 0 C for 1 hour) hyperthermia treatment was administered followed by iridium placement. A second heating was performed upon removal of the iridium and was accomplished without major side effects. Thermometry data and follow-up are presented

  13. Rehabilitation of maxillary arch with attachment-retained mesh-reinforced single complete denture

    Science.gov (United States)

    Vamsi Krishna, C H; Rao, A Kaleshwar; Sekhar, N Chandra; Shastry, Y Mahadev

    2014-01-01

    Fabrication of conventional complete dentures was one of the most commonly advised treatment options to mange edentulous patients since many years. One of the commonly encountered challenging tasks in prosthodontics is a clinical situation in which patients have maxillary completely edentulous arches opposing mandibular natural dentition. This situation can be effectively managed by retaining some of the natural teeth as overdenture abutments. Tooth supported overdenture retained by attachments will improve retention, support and stability, and reduces rate of ridge resorption along with psychological benefits to the patients by providing tactile sensation. The present case report describes management of patients with edentulous maxillary arch opposing natural mandibular dentition-rehabilitated attachment-retained mesh-reinforced overdenture. PMID:24574522

  14. Rehabilitation of maxillary arch with attachment-retained mesh-reinforced single complete denture.

    Science.gov (United States)

    Vamsi Krishna, C H; Rao, A Kaleshwar; Sekhar, N Chandra; Shastry, Y Mahadev

    2014-02-26

    Fabrication of conventional complete dentures was one of the most commonly advised treatment options to mange edentulous patients since many years. One of the commonly encountered challenging tasks in prosthodontics is a clinical situation in which patients have maxillary completely edentulous arches opposing mandibular natural dentition. This situation can be effectively managed by retaining some of the natural teeth as overdenture abutments. Tooth supported overdenture retained by attachments will improve retention, support and stability, and reduces rate of ridge resorption along with psychological benefits to the patients by providing tactile sensation. The present case report describes management of patients with edentulous maxillary arch opposing natural mandibular dentition-rehabilitated attachment-retained mesh-reinforced overdenture.

  15. Orthodontically guided bone transport in the treatment of alveolar cleft: A case report

    Science.gov (United States)

    Gómez, Elena; Otero, Marta; Berraquero, Rosario; Wucherpfennig, Begona; Hernández-Godoy, Juan; Guiñales, Jorge; Vincent, Germán; Burgueño, Miguel

    2016-01-01

    Introduction Conventional treatments are sometimes not possible in certain alveolar cleft cases due to the severity of the gap which separates the fragments. Various management strategies have been proposed, including sequential surgical interventions or delaying treatment until adulthood to then carry out maxillary osteotomies. A further alternative approach has also been proposed, involving the application of bone transport techniques to mobilise the osseous fragments and thereby reduce the gap between lateral fragments and the premaxilla. Case Report We introduce the case of a 10-year-old patient who presented with a bilateral alveolar cleft and a severe gap. Stable occlusion between the premaxilla and the mandible was achieved following orthodontic treatment, making it inadvisable to perform a retrusive osteotomy of the premaxilla in order to close the alveolar clefts. Faced with this situation, it was decided we would employ a bone transport technique under orthodontic guidance using a dental splint. This would enable an osseous disc to be displaced towards the medial area and reduce the interfragmentary distance. During a second surgical intervention, closure of the soft tissues was performed and the gap was filled in using autogenous bone. Conclusions The use of bone transport techniques in selected cases allows closure of the osseous defect, whilst also preserving soft tissues and reducing the amount of bone autograft required. In our case, we were able to respect the position of the premaxilla and, at the same time, generate new tissues at both an alveolar bone and soft tissue level with results which have remained stable over the course of time. Key words:Alveolar cleft, bone transport, graft. PMID:26855699

  16. Bone grafting of alveolar socket and ovate seat pontic preparation for natural emergence profile for anterior bridge - A case report

    Directory of Open Access Journals (Sweden)

    Vijay Deshmukh

    2009-01-01

    Full Text Available Alveolar atrophy following tooth extraction remains a challenge for future prosthetic restorations. Immediate implant placement and postextraction alveolar bone grafting are two methods that are used to prevent significant postextraction bone loss. Grafting is one of the most common methods of socket preservation widely used to prevent the collapse of oral tissues following extraction so that an excellent esthetic prosthesis can be provided particularly in the anterior maxillary region. The present report describes the management of a maxillary tooth extraction socket using a socket preservation technique involving placement of an osteoconductive slowly resorbable grafting material & resorbable collagen membrane in the extraction socket also called as Bio-Col socket preservation technique followed by a provisional restoration to preserve the tissues & interdental papilla for the placement of future final ovate pontic anterior bridge to give the illusion of the tooth emerging from the gums. This technique resulted in a successful prevention of alveolar bone loss following tooth extraction & maintainence of tissue contour & density which provided a good tissue base for the fabrication of Ovate pontic giving excellent esthetic results.

  17. Altered anatomy in a case with a buccally impacted maxillary canine tooth.

    Science.gov (United States)

    Rusu, M C; Comes, C A; Stanciu, D; Ciuluvică, R C; Motoc, A; Niculescu, M C; Jianu, Adelina Maria

    2010-01-01

    Bilateral dissections of maxilla were performed in a human adult cadaver head, male, aged 53 years. After the en block removal of the soft tissues in the oral and infraorbital regions, the antero-lateral surface of maxilla was exposed and also the vestibular aspect of the upper alveolar process. An oblique labially impacted right upper canine was evidenced, completely submucosal: its apex was tangent to the maxillary sinus floor, while the superior side of the apical part of the root was in close relation with the floor of the laterally expanded inferior nasal meatus. Superior and adjacent to the neck of that impacted canine a follicular cyst was evidenced and the antral wall presented distally to the apex of the impacted canine a dehiscent area, where the antral mucosa was only covered by an incomplete thin bony lamella. The incisors on that side were present but no resorption was identified at their level. Within the anterior border of the wall separating the maxillary sinus, small, and the inferior nasal meatus, the nerve for that impacted canine was coursing; the nerves for the upper incisors were initially located within the antero-lateral wall of the inferior nasal meatus. Although small, the maxillary sinus presented a supero-medial recess above the enlarged inferior nasal meatus and lateral to the normally-sized middle nasal meatus.

  18. [Autotransplantation of a maxillary incisor and orthodontic care: a case study].

    Science.gov (United States)

    Charpentier, Valentine; Makaremi, Masrour; Brondeau, François de

    2017-12-01

    Severely impacted teeth with atypical root anatomy do not respond well to orthodontic traction after surgical exposure. Consequently, they are often removed, but replacing them with dental prostheses can prove difficult in patients who are still growing. Thus, autotransplantation seems to be the only way to preserve a natural tooth and the alveolar bone. An upper central incisor impacted in the region of the nasal cavities with an open apex was diagnosed in an 8.5-year-old female patient. The tooth displayed a curved root pressed against the maxillary cortical bone preventing orthodontic traction treatment. Through this clinical case involving autotransplantation of a maxillary incisor report and a review of the literature, this article explores the indications and exposes the different stages of this orthodontic-surgical protocol. In this case, autotransplantation enabled restoration of maxillary arch continuity. After two years of orthodontic treatment, the bone reconstruction of the extraction site was very satisfactory. The benefits of this technique and the precautions to be taken are discussed as well as the various protocols. The increasing success rate of this surgical procedure makes it possible to consider it as a protocol for the future. © EDP Sciences, SFODF, 2017.

  19. Health of periodontal tissues and resorption status after orthodontic treatment of impacted maxillary canines.

    Science.gov (United States)

    Oz, A Z; Ciger, S

    2018-03-01

    The aim of the present study was to evaluate the changes of incisor root resorption associated with impacted maxillary canines and health of periodontal tissues around maxillary canines erupted with orthodontic treatment. Twenty patients with a unilateral palatally impacted maxillary canine were included in the study. Cone-beam computed tomography images taken before and after orthodontic treatment were compared with the contralateral canines serving as control teeth. Root resorption was present in 10% of central and 40% of lateral incisors before treatment. After treatment, the incidence of resorption decreased. The thickness of the buccal bone surrounding the impacted canines was similar to that surrounding the contralateral canines, except in the apical area. Periodontal pocket depth and alveolar bone loss were greater for the impacted canine teeth than for the contralateral canines. Incisor root resorption associated with impacted canine teeth showed signs of repair after orthodontic treatment. Slight differences related to periodontal health were found between the previously impacted teeth and contralateral canine teeth.

  20. The effect of buccal corticotomy on accelerating orthodontic tooth movement of maxillary canine

    Science.gov (United States)

    Jahanbakhshi, Mohammad Reza; Motamedi, Ali Mohammad Kalantar; Feizbakhsh, Masoud; Mogharehabed, Ahmad

    2016-01-01

    Background: Selective alveolar corticotomy is defined as an intentional injury to cortical bone. This technique is an effective means of accelerating orthodontic tooth movement. The aim of this study is to evaluate the effect of buccal corticotomy in accelerating maxillary canine retraction. Materials and Methods: The sample in this clinical trial study consisted of 15 adult female patients with therapeutic need for extraction of maxillary first premolars and maximum canine retraction. By use of split-mouth design, at the time of premolars extraction, buccal corticotomy was performed around the maxillary first premolar, randomly on one side of maxilla, and the other side was reserved as the control side. Canine retraction was performed by use of friction – less mechanic with simple vertical loop. Every 2 weeks, distance between canines and second premolars was measured until complete space closure. The velocity of space closure was calculated to evaluate the effect of this technique in accelerating orthodontic tooth movement. The obtained data were statistically analyzed using independent t-test, and the significance was set at 0.05. Results: The rate of canine retraction was significantly higher on the corticotomy side than the control side by an average of 1.8 mm/month versus 1.1 mm/month in the corticotomy side and control side, respectively (P orthodontic tooth movement about two times faster than conventional orthodontics and it is significant in early stages after surgical porsedure. Therefore Buccal corticotomy is a useful adjunct technique for accelerating orthodontic tooth movement. PMID:27605986

  1. Maxillary segmental distraction in children with unilateral clefts of lip, palate, and alveolus.

    Science.gov (United States)

    Zemann, Wolfgang; Pichelmayer, Margit

    2011-06-01

    Alveolar clefts are commonly closed by a bone grafting procedure. In cases of wide clefts the deficiency of soft tissue in the cleft area may lead to wound dehiscence and loss of the bony graft. Segmental maxillary bony transfer has been mentioned to be useful in such cases. Standard distraction devices allow unidirectional movement of the transported segment. Ideally the distraction should strictly follow the dental arch. The aim of this study was to analyze distraction devices that were adapted to the individual clinical situation of the patients. The goal was to achieve a distraction strictly parallel to the dental arch. Six children with unilateral clefts of lip, palate, and alveolus between 12 and 13 years of age were included in the study. The width of the cleft was between 7 and 19 mm. Dental cast models were used to manufacture individual distraction devices that should allow a segmental bony transport strictly parallel to the dental arch. Segmental osteotomy was performed under general anesthesia. Distraction was started 5 days after surgery. All distracters were tooth fixed but supported by palatal inserted orthodontic miniscrews. In all patients, a closure of the alveolar cleft was achieved. Two patients required additional bone grafting after the distraction procedure. The distraction was strictly parallel to the dental arch in all cases. In 1 case a slight cranial displacement of the transported maxillary segment could be noticed, leading to minor modifications of the following distractors. Distraction osteogenesis is a proper method to close wide alveolar clefts. Linear segmental transport is required in the posterior part of the dental arch, whereas in the frontal part the bony transport should run strictly parallel to the dental arch. An exact guided segmental transport may reduce the postoperative orthodontic complexity. Copyright © 2011 Mosby, Inc. All rights reserved.

  2. Rapid maxillary anterior teeth retraction en masse by bone compression: a canine model.

    Directory of Open Access Journals (Sweden)

    Chufeng Liu

    Full Text Available The present study sought to establish an animal model to study the feasibility and safety of rapid retraction of maxillary anterior teeth en masse aided by alveolar surgery in order to reduce orthodontic treatment time.Extraction of the maxillary canine and alveolar surgery were performed on twelve adult beagle dogs. After that, the custom-made tooth-borne distraction devices were placed on beagles' teeth. Nine of the dogs were applied compression at 0.5 mm/d for 12 days continuously. The other three received no force as the control group. The animals were killed in 1, 14, and 28 days after the end of the application of compression.The tissue responses were assessed by craniometric measurement as well as histological examination. Gross alterations were evident in the experimental group, characterized by anterior teeth crossbite. The average total movements of incisors within 12 days were 4.63±0.10 mm and the average anchorage losses were 1.25±0.12 mm. Considerable root resorption extending into the dentine could be observed 1 and 14 days after the compression. But after consolidation of 28 days, there were regenerated cementum on the dentine. There was no apparent change in the control group. No obvious tooth loosening, gingival necrosis, pulp degeneration, or other adverse complications appeared in any of the dogs.This is the first experimental study for testing the technique of rapid anterior teeth retraction en masse aided by modified alveolar surgery. Despite a preliminary animal model study, the current findings pave the way for the potential clinical application that can accelerate orthodontic tooth movement without many adverse complications.It may become a novel method to shorten the clinical orthodontic treatment time in the future.

  3. Changes in speech following maxillary distraction osteogenesis.

    Science.gov (United States)

    Guyette, T W; Polley, J W; Figueroa, A; Smith, B E

    2001-05-01

    The purpose of this study was to describe changes in articulation and velopharyngeal function following maxillary distraction osteogenesis. This is a descriptive, post hoc clinical report comparing the performance of patients before and after maxillary distraction. The independent variable was maxillary distraction while the dependent variables were resonance, articulation errors, and velopharyngeal function. The data were collected at a tertiary health care center in Chicago. The data from pre- and postoperative evaluations of 18 maxillary distraction patients were used. The outcome measures were severity of hypernasality and hyponasality, velopharyngeal orifice size as estimated using the pressure-flow technique, and number and type of articulation errors. At the long-term follow-up, 16.7% exhibited a significant increase in hypernasality. Seventy-five percent of patients with preoperative hyponasality experienced improved nasal resonance. Articulation improved in 67% of patients by the 1-year follow-up. In a predominately cleft palate population, the risk for velopharyngeal insufficiency following maxillary distraction is similar to the risk observed in Le Fort I maxillary advancement. Patients being considered for maxillary distraction surgery should receive pre- and postoperative speech evaluations and be counseled about risks for changes in their speech.

  4. Orthopantomographic study of the maxillary sinus

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyun Joo; Yu, Dong Su [School of Dentistry, Seoul National University, Seoul (Korea, Republic of)

    1971-11-15

    The author has observed the orthopantomograms of the maxillary sinus which were taken by special exposure method to study mesiodistal dimension, shape, symmetrical relationship, bony septum of the maxillary sinus and relationship between upper lst molar and the maxillary sinus, that were selected 56 cases of 23 to 27 years old male, who have good systemic conditions and no missing teeth on upper posterior molar in normal occlusion, and obtained following conclusions: 1. Mesiodistal dimensions of the maxillary sinus are shown as follows; The mean of left dimension is 50.94 {+-} 8.34 mm and of right dimension is 49.50 {+-} 9.87 mm. 2. To the shape of the maxillary sinus, V or U shape are 33 cases(29.5%) and W shape are 77 cases (70.5%). 3. In the ralationship between upper lst molar and floor of the maxllary sinus, superimposition are 62 cases (55.36%) a nd approach are 50 cases (44.64%). 4. In the right and left symmetrical relationship of the maxillary sinus, symmetry are 37 cases (66.07%) and asymmetry are 19 cases (33.93%). 5. The bony septums in the maxillary sinuses revealed that presence of bony septums are 29 cases (25.8%) and absence ar e 83 cases (74.11%).

  5. Prenatal cleft lip and maxillary alveolar defect repair in a 2-step fetal lamb model.

    NARCIS (Netherlands)

    Wenghoefer, M.H.; Deprest, J.; Goetz, W.; Kuijpers-Jagtman, A.M.; Bergé, S.J.

    2007-01-01

    PURPOSE: As there is no satisfying animal model simulating the complex cleft lip and palate anatomy in a standardized defect on one hand, and comprising the possibilities for extensive surgical procedures on the other hand, an improved fetal lamb model for cleft surgery was developed. MATERIALS AND

  6. Alveolar nerve repositioning with rescue implants for management of previous treatment. A clinical report.

    Science.gov (United States)

    Amet, Edward M; Uehlein, Chris

    2013-12-01

    The goal of modern implant dentistry is to return patients to oral health in a rapid and predictable fashion, following a diagnostically driven treatment plan. If only a limited number of implants can be placed, or some fail and the prosthetic phase of implant dentistry is chosen to complete the patient's treatment, the final outcome may result in partial patient satisfaction and is commonly referred to as a "compromise." Previous All-on-4 implant treatment for the patient presented here resulted in a compromise, with an inadequate support system for the mandibular prosthesis and a maxillary complete denture with poor esthetics. The patient was unable to function adequately and also was disappointed with the resulting appearance. Correction of the compromised treatment consisted of bilateral inferior alveolar nerve elevation and repositioning without bone removal for lateral transposition, to gain room for rescue implants for a totally implant-supported and stabilized prosthesis. Treatment time to return the patient to satisfactory comfort, function, facial esthetics, and speech was approximately 2 weeks. The definitive mandibular prosthesis was designed for total implant support and stability with patient retrievability. Adequate space between the mandibular bar system and the soft tissue created a high water bridge effect for self-cleansing. Following a short interim mandibular healing period, the maxillary sinuses were bilaterally grafted to compensate for bone inadequacies and deficiencies for future maxillary implant reconstruction. © 2013 by the American College of Prosthodontists.

  7. Truncal anaesthesia of the maxillary nerve for outpatient surgically assisted rapid maxillary expansion.

    Science.gov (United States)

    Robiony, M; Demitri, V; Costa, F; Politi, M; Cugini, U

    1998-10-01

    We present our experience of transcutaneous truncal anaesthesia of the maxillary nerve in association with transmucosal anaesthesia of the sphenopalatine ganglion in surgically assisted rapid maxillary expansion. Twelve patients with a skeletal transverse discrepancy of the maxilla were treated in our department from 1994 to 1995. Maxillary transcutaneous nerve block was done with a Quincke 8 cm spinal needle together with transmucosal anaesthesia of the sphenopalatine ganglion. Mepivacaine without adrenaline and sodium bicarbonate 1/10 was used for truncal anaesthesia and lidocaine-prilocaine cream for transmucosal anaesthesia. A Le Fort I osteotomy, lateral nasal wall osteotomy, pterygomaxillary osteotomy, and a palatal osteotomy were done for all patients before the maxillary expansion. Total anaesthesia of the maxillary area facilitated the operations and appreciably reduced the amount of postoperative pain. The ease of achieving effective anaesthesia before and after operation and the absence of side-effects make this form of anaesthetic particularly useful in surgically assisted rapid maxillary expansion.

  8. Antibiotics for acute maxillary sinusitis

    DEFF Research Database (Denmark)

    Ahovuo-Saloranta, Anneli; Borisenko, Oleg V; Kovanen, Niina

    2008-01-01

    BACKGROUND: Expert opinions vary on the appropriate role of antibiotics for sinusitis, one of the most commonly diagnosed conditions among adults in ambulatory care. OBJECTIVES: We examined whether antibiotics are effective in treating acute sinusitis, and if so, which antibiotic classes...... are the most effective. SEARCH STRATEGY: We searched the Cochrane Central Register of Controlled Trials (CENTRAL) (The Cochrane Library, 2007, Issue 3); MEDLINE (1950 to May 2007) and EMBASE (1974 to June 2007). SELECTION CRITERIA: Randomized controlled trials (RCTs) comparing antibiotics with placebo...... or antibiotics from different classes for acute maxillary sinusitis in adults. We included trials with clinically diagnosed acute sinusitis, whether or not confirmed by radiography or bacterial culture. DATA COLLECTION AND ANALYSIS: At least two review authors independently screened search results, extracted...

  9. Intracranial alveolar echinococcosis: CT and MRI

    Energy Technology Data Exchange (ETDEWEB)

    Bensaid, A.H. (Dept. of Radiology B, Univ. Hospital, Strasbourg (France)); Dietemann, J.L. (Dept. of Radiology B, Univ. Hospital, Strasbourg (France)); Filippi de la Palavesa, M.M. (Dept. of Radiology B, Univ. Hospital, Strasbourg (France)); Klinkert, A. (Dept. of Radiology B, Univ. Hospital, Strasbourg (France)); Kastler, B. (Dept. of Radiology B, Univ. Hospital, Strasbourg (France)); Gangi, A. (Dept. of Radiology B, Univ. Hospital, Strasbourg (France)); Jacquet, G. (Dept. of Neurosurgery, Univ. Hospital, Besancon (France)); Cattin, F. (Dept. of Radiology, Univ. Hospital, Besancon (France))

    1994-05-01

    Intracranial alveolar echinococcosis is uncommon. We report a patient with right frontal lobe and palpebral lesions secondary to a primary hepatic focus with secondary lesion in the lung. The intracranial and palpebral cystic masses were totally removed and both proved to be alveolar hydatid cysts. An unusual feature in this case is CT and MRI demonstration of dural and bony extension. (orig.)

  10. Intracranial alveolar echinococcosis: CT and MRI

    International Nuclear Information System (INIS)

    Bensaid, A.H.; Dietemann, J.L.; Filippi de la Palavesa, M.M.; Klinkert, A.; Kastler, B.; Gangi, A.; Jacquet, G.; Cattin, F.

    1994-01-01

    Intracranial alveolar echinococcosis is uncommon. We report a patient with right frontal lobe and palpebral lesions secondary to a primary hepatic focus with secondary lesion in the lung. The intracranial and palpebral cystic masses were totally removed and both proved to be alveolar hydatid cysts. An unusual feature in this case is CT and MRI demonstration of dural and bony extension. (orig.)

  11. Pulmonary alveolar microlithiasis in children

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, H. [Center of Diagnostic Radiology, Frankfurt Univ. (Germany); Loercher, U. [Center of Diagnostic Radiology, Frankfurt Univ. (Germany); Kitz, R. [Center of Pediatrics, Frankfurt Univ. (Germany); Zielen, S. [Center of Pediatrics, Frankfurt Univ. (Germany); Ahrens, P. [Center of Pediatrics, Frankfurt Univ. (Germany); Koenig, R. [Inst. of Human Genetics, Frankfurt Univ. (Germany)

    1996-01-01

    Two asymptomatic Turkish sibs are presented, a 4-year-old boy and his 7-year-old sister, with pulmonary alveolar microlithiasis (PAM) confirmed by transbronchial lung biopsy and bronchoalveolar lavage. Chest radiographs and high resolution CT demonstrated wide-spread intra-alveolar calcifications in both lungs. The lesions were sharply defined and less than 1 mm in diameter. CT documented a high concentration of microliths along the bronchovascular bundles, the intralobular fissue and the (sub)pleural lung parenchyma. The combination of bronchoalveolar lavage and roentgenographic appearance in high resolution CT are characteristic and pathognomonic, and can confirm the diagnosis. The more severe changes in the elder sib and the radiographic controls suggest that the pulmonary disease may be progressive in our patients. The described family of consanguineous, unaffected parents with two affected and one healthy child confirmed the autosomal recessive inheritance of PAM (McKusick 265100). In addition, the affected girl had autosomal recessive Waardenburg-anophthalmia syndrome (McKusick 206920), raising the question of whether this is a chance occurrence or possibly a contiguous gene syndrome. (orig.)

  12. Clinical and radiographic evaluation of maxillary central incisors exposure in patients undergoing maxillary advancement

    Directory of Open Access Journals (Sweden)

    Guilherme dos Santos Trento

    2015-12-01

    Full Text Available Abstract Introduction: Patients with dentofacial deformities may undergo orthodontic or orthodontic-surgical treatment. Both modalities can affect esthetics. Objective: This study aims to evaluate clinical and radiographic changes in exposure of maxillary central incisors occurring after orthognathic surgery for maxillary advancement. Methods: A total of 17 patients who underwent orthognathic surgery for maxillary advancement between September, 2010 and July, 2011 were selected. Exposure of maxillary central incisors was evaluated clinically and by lateral cephalograms. Measurements were taken one week before and three months after surgery. Data were paired in terms of sex, age, nasolabial angle, height and thickness of the upper lip, the amount of maxillary advancement, clinical exposure and inclination of maxillary central incisor by statistical tests (CI 95%. Results: After maxillary advancement, incisor clinical exposure had increased even with relaxed lips and under forced smile. Moreover, there was a mean increase of 23.33% revealed by lateral cephalograms. There was an inverse correlation between upper lip thickness and incisors postsurgical exposure revealed by radiographic images (p = 0.002. Conclusions: Significant changes in the exposure of maxillary central incisors occur after maxillary advancement, under the influence of some factors, especially lip thickness.

  13. Managing the severely proclined maxillary anteriors by extracting traumatized right maxillary central incisor

    Directory of Open Access Journals (Sweden)

    Mahesh Jain

    2014-01-01

    Full Text Available A 14-year-old girl reported with severely proclined maxillary anterior teeth with fractured and discolored right maxillary central incisor with questionable prognosis. Autotransplantation of premolar to replace central incisor was considered a risky option as patient was 14-year-old with presence of advanced root development of premolar. The immediate placement of the prosthetic implant was also not possible because of patient′s age. Therefore, it was decided to use the space obtained by extracting questionable maxillary right central incisor for orthodontic purpose and also sacrificing the healthy premolar is invariably an excessive biological cost for a modest functional and aesthetic gain. Hence, the treatment plan for this case includes extraction of right maxillary central incisor and left maxillary first premolar, movement of right maxillary lateral incisor mesially, achieving normal axial inclination of maxillary anteriors with normal overjet and overbite. Mandibular arch was treated nonextraction due to congenitally missing central incisors with presence of normally inclined lower anteriors thereby maintaining Angles class I occlusion. Tipping, usually, seen in Begg mechanotherapy was used for our advantage to correct severely proclined maxillary anteriors with simultaneous bite opening mechanics. Case was completed in 19 months and posttreatment records including photographs, radiographs and study models were made. Begg wrap around the retainer was placed in the maxillary arch allowing natural settling of occlusion.

  14. Ridge and Furrow Fields

    DEFF Research Database (Denmark)

    Møller, Per Grau

    2016-01-01

    Ridge and furrow is a specific way of ploughing which makes fields of systematic ridges and furrows like a rubbing washboard. They are part of an overall openfield system, but the focus in this paper is on the functionality of the fields. There are many indications that agro-technological reasons...... systems and the establishment of basic structures like villages (with churches) and townships and states (in northern Europe). The fields can be considered as a resilient structure lasting for 800 years, along with the same basic physical structures in society....

  15. Oxytocin promotes bone formation during the alveolar healing process in old acyclic female rats.

    Science.gov (United States)

    Colli, Vilma Clemi; Okamoto, Roberta; Spritzer, Poli Mara; Dornelles, Rita Cássia Menegati

    2012-09-01

    OT was reported to be a direct regulator of bone mass in young rodents, and this anabolic effect on bone is a peripheral action of OT. The goal of this study was to investigate the peripheral action of oxytocin (OT) in the alveolar healing process in old female rats. Females Wistar rats (24-month-old) in permanent diestrus phase, received two ip (12h apart) injections of saline (NaCl 0.15M - control group) or OT (45μg/rat - treated group). Seven days later, the right maxillary incisor was extracted and analyses were performed up to 28 days of the alveolar healing process (35 days after saline or OT administration). Calcium and phosphorus plasma concentrations did not differ between the groups. The plasma biochemical bone formations markers, alkaline phosphatase (ALP) and osteocalcin were significantly higher in the treated group. Histomorphometric analyses confirmed bone formation as the treated group presented the highest mean value of post-extraction bone formation. Tartrate-resistant acid phosphatase (TRAP) was significantly reduced in the treated group indicating an anti-resorptive effect of OT. Immunohistochemistry reactions performed in order to identify the presence of osteocalcin and TRAP in the bone cells of the dental socket confirmed these outcomes. OT was found to promote bone formation and to inhibit bone resorption in old acyclic female rats during the alveolar healing process. Published by Elsevier Ltd.

  16. Mucous retention cyst of the maxillary sinus.

    Science.gov (United States)

    Ruprecht, A; Batniji, S; el-Neweihi, E

    1986-12-01

    The mucous retention cyst is not a rare phenomenon. The incidence of dental patients was determined. Of 1685 patient radiographs reviewed, 44 (2.6%) had one or more mucous retention cysts in the maxillary sinuses.

  17. Postoperative Maxillary Cyst: A Case Report

    Directory of Open Access Journals (Sweden)

    Asiye Şafak Bulut

    2010-01-01

    Full Text Available Postoperative maxillary cyst is a quite rare delayed complication of surgical intervention associated with maxillary sinuses. It occurs many years after surgery. This paper describes a 54-year-old woman presenting with swelling of left cheek for seven-years duration. The orthopantomograph revealed a unilocular cystic radiolucency with well-defined margins in left maxillary sinus. In the computerized tomography, the cyst had a sclerotic wall with bony condensations. Aspiration cytology revealed many neutrophil leukocytes. Cyst was drained and enucleated. Histopathologically, it had a fibrous wall with inflammation and focal reactive bone formation and lined by a respiratory-type epithelium. In the clinical history, it is learned that she had a maxillary sinus surgery 8 years ago and the diagnosis was made considering the clinical and histopathological findings.

  18. Positional relationship between the maxillary sinus floor and the apex of the maxillary first molar using cone beam computed tomograph

    International Nuclear Information System (INIS)

    Kim, Kyung Hwa; Koh, Kwang Joon

    2008-01-01

    To assess the positional relationship between the maxillary sinus floor and the apex of the maxillary first molar using cone beam computed tomograph (CBCT). CBCTs from 127 subjects were analysed. A total of 134 maxillary first molars were classified according to their vertical and horizontal positional relationship to the maxillary sinus floor and measured according to the distance between the maxillary sinus floor and the maxillary first molar. Type III (The root projected laterally on the sinus cavity but its apex is outside the sinus boundaries) was dominated between 10 and 19 years and type I (The root apex was not in contact with the cortical borders of the sinus) was dominated (P<0.05) between 20 and 72 years on the vertical relationship between the maxillary sinus floor and the apex of the maxillary first molar. The maxillary sinus floor was located more at the apex (78.2%) than at the furcation (21.3%) for the palatal root. The distance from the root apex to the maxillary sinus floor confined to type I was increased according to the ages (P<0.05). Type M (The maxillary sinus floor was located between the buccal and the palatal root) was most common (72.4%) on the horizontal relationship between the maxillary sinus floor and the apex of the maxillary first molar. CBCT can provide highly qualified images for the maxillary sinus floor and the root apex of the maxillary first molar.

  19. Maxillary fractures: a review of 56 cases in a university affiliated hospital

    Directory of Open Access Journals (Sweden)

    Farahvash MR

    2009-07-01

    Full Text Available "n Normal 0 false false false EN-US X-NONE AR-SA MicrosoftInternetExplorer4 st1":*{behavior:url(#ieooui } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi;} Background: The aim of this study was to describe the prevalence of different types of maxillary fractures, concurrent fractures and accompanying signs and symptoms. Trauma is the second cause of mortality in Iran, after cardiovascular diseases. In traumatic patients, head, neck and facial bones fractures are common. The maxillary fractures are seen much less commonly than the fractures of the mandible, zygoma, or nose. Maxillary fractures include: (Le fort I, II, III fractures- alveolar process fracture and Sagittal fracture. The most common cause of maxillary fracture is motor vehicle accidents. "n"n Methods: This descriptive cross sectional study designed on 56 patients with maxillary fractures in a referral educational trauma center of Tehran. Sample size was the patients who referred to this hospital with maxillary fracture during past seven years. "n"nResults: Forty eight (86% patients were male and 8(14% were female. Male to female ratio was 6/1. Mean age of patients was 30 years. The most common type of maxillary fracture was infra orbital rim and floor fracture. Among Le fort fracture; Le fort type II was the most common. Paresthesia of infra orbital nerve and malocclusion were

  20. 3D-Printed Scaffolds and Biomaterials: Review of Alveolar Bone Augmentation and Periodontal Regeneration Applications

    Science.gov (United States)

    Asa'ad, Farah; Giannì, Aldo Bruno; Giannobile, William V.; Rasperini, Giulio

    2016-01-01

    To ensure a successful dental implant therapy, the presence of adequate vertical and horizontal alveolar bone is fundamental. However, an insufficient amount of alveolar ridge in both dimensions is often encountered in dental practice due to the consequences of oral diseases and tooth loss. Although postextraction socket preservation has been adopted to lessen the need for such invasive approaches, it utilizes bone grafting materials, which have limitations that could negatively affect the quality of bone formation. To overcome the drawbacks of routinely employed grafting materials, bone graft substitutes such as 3D scaffolds have been recently investigated in the dental field. In this review, we highlight different biomaterials suitable for 3D scaffold fabrication, with a focus on “3D-printed” ones as bone graft substitutes that might be convenient for various applications related to implant therapy. We also briefly discuss their possible adoption for periodontal regeneration. PMID:27366149

  1. 3D-Printed Scaffolds and Biomaterials: Review of Alveolar Bone Augmentation and Periodontal Regeneration Applications

    Directory of Open Access Journals (Sweden)

    Farah Asa’ad

    2016-01-01

    Full Text Available To ensure a successful dental implant therapy, the presence of adequate vertical and horizontal alveolar bone is fundamental. However, an insufficient amount of alveolar ridge in both dimensions is often encountered in dental practice due to the consequences of oral diseases and tooth loss. Although postextraction socket preservation has been adopted to lessen the need for such invasive approaches, it utilizes bone grafting materials, which have limitations that could negatively affect the quality of bone formation. To overcome the drawbacks of routinely employed grafting materials, bone graft substitutes such as 3D scaffolds have been recently investigated in the dental field. In this review, we highlight different biomaterials suitable for 3D scaffold fabrication, with a focus on “3D-printed” ones as bone graft substitutes that might be convenient for various applications related to implant therapy. We also briefly discuss their possible adoption for periodontal regeneration.

  2. Localized ridge defect augmentation using human pericardium membrane and demineralized bone matrix.

    Science.gov (United States)

    Vidyadharan, Arun Kumar; Ravindran, Anjana

    2014-01-01

    Patient wanted to restore her lost teeth with implants in the lower left first molar and second premolar region. Cone beam computerized tomography (CBCT) revealed inadequate bone width and height around future implant sites. The extraction socket of second premolar area revealed inadequate socket healing with sparse bone fill after 4 months of extraction. To evaluate the clinical feasibility of using a collagen physical resorbable barrier made of human pericardium (HP) to augment localized alveolar ridge defects for the subsequent placement of dental implants. Ridge augmentation was done in the compromised area using Puros® demineralized bone matrix (DBM) Putty with chips and an HP allograft membrane. Horizontal (width) and vertical hard tissue measurements with CBCT were recorded on the day of ridge augmentation surgery, 4 month and 7 months follow-up. Intra oral periapical taken 1 year after implant installation showed minimal crestal bone loss. Bone volume achieved through guided bone regeneration was a gain of 4.8 mm horizontally (width) and 6.8 mm vertically in the deficient ridge within a period of 7 months following the procedure. The results suggested that HP Allograft membrane may be a suitable component for augmentation of localized alveolar ridge defects in conjunction with DBM with bone chips.

  3. [Stimulation and evaluation on maxillary distraction osteogenesis using CASSOS 2001].

    Science.gov (United States)

    Zhu, Min; Qiu, Wei-liu; Tang, You-sheng; Li, Qing-yun

    2002-09-01

    To simulate maxillary distraction osteogenesis and evaluate the change of soft and hard tissue before and after treatment, using Computer-Assisted Simulation System for Orthognathic Surgery( CASSOS 2001). A fourteen-year-old boy with severe maxillary hypoplasia, due to unilateral cleft lip and palate, was analysed by cephalometric analysis. The simulations of maxillary distraction osteogenesis (Le Fort I osteotomy and Le Fort II osteotomy) were re-analysed. After the treatment, cephalometric analysis was preformed again. The data were compared. The maxillary hypoplasia was well treated using maxillary distraction osteogenesis; Compared with Le fort I osteotomy, more satisfactory results can be obtained by Le fort I distraction osteogenesis. Maxillary distraction osteogenesis is a better way to treat severe maxillary hypoplasia with operated CLP than maxillary osteotomy. CASSOS 2001 can help surgeons and patients on simulation and evaluation of maxillary distraction osteogenesis, and on decision of treatment plan.

  4. Reconstrucción del maxilar superior mediante transporte del proceso alveolar: Presentación de un caso Reconstruction of the maxilla by means of transport of the alveolar process: A case report

    Directory of Open Access Journals (Sweden)

    A. Bilbao

    2006-02-01

    Full Text Available La osteogénesis mediante distracción aplicada a la reconstrucción del proceso alveolar es una técnica sobradamente contrastada en la literatura, al igual que la utilización del transporte óseo en la reconstrucción de defectos segmentarios mandibulares. Presentamos en este artículo un caso de reconstrucción de un defecto segmentario del maxilar superior mediante transporte de proceso alveolar y su posterior rehabilitación protésica implantosoportada. Mostramos tanto la técnica quirúrgica como el manejo de del vector de distracción utilizando elásticos de ortodoncia y tornillos de bloqueo intermaxilar.Osteogenesis by means of distraction applied to the reconstruction of the alveolar process is a well-documented technique in the literature, as is the use of bone transport in the reconstruction of mandibular segment defects. In the present article we report on a case of reconstruction of a segment defect in the maxilla using the alveolar transport process, and on the subsequent rehabilitation by means of an implant-supported prosthesis. Both the surgical technique and the handling of the distraction vector using orthodontic bands and inter-maxillary fixation screws are shown.

  5. Inferior alveolar nerve block: Alternative technique.

    Science.gov (United States)

    Thangavelu, K; Kannan, R; Kumar, N Senthil

    2012-01-01

    Inferior alveolar nerve block (IANB) is a technique of dental anesthesia, used to produce anesthesia of the mandibular teeth, gingivae of the mandible and lower lip. The conventional IANB is the most commonly used the nerve block technique for achieving local anesthesia for mandibular surgical procedures. In certain cases, however, this nerve block fails, even when performed by the most experienced clinician. Therefore, it would be advantageous to find an alternative simple technique. The objective of this study is to find an alternative inferior alveolar nerve block that has a higher success rate than other routine techniques. To this purpose, a simple painless inferior alveolar nerve block was designed to anesthetize the inferior alveolar nerve. This study was conducted in Oral surgery department of Vinayaka Mission's dental college Salem from May 2009 to May 2011. Five hundred patients between the age of 20 years and 65 years who required extraction of teeth in mandible were included in the study. Out of 500 patients 270 were males and 230 were females. The effectiveness of the IANB was evaluated by using a sharp dental explorer in the regions innervated by the inferior alveolar, lingual, and buccal nerves after 3, 5, and 7 min, respectively. This study concludes that inferior alveolar nerve block is an appropriate alternative nerve block to anesthetize inferior alveolar nerve due to its several advantages.

  6. Mate tea (Ilex paraguariensis) improves bone formation in the alveolar socket healing after tooth extraction in rats.

    Science.gov (United States)

    Brasilino, Matheus da Silva; Stringhetta-Garcia, Camila Tami; Pereira, Camila Scacco; Pereira, Ariana Aparecida Ferreira; Stringhetta, Karina; Leopoldino, Andréia Machado; Crivelini, Marcelo Macedo; Ervolino, Edilson; Dornelles, Rita Cássia Menegati; de Melo Stevanato Nakamune, Ana Cláudia; Chaves-Neto, Antonio Hernandes

    2018-04-01

    The objective of this study was to investigate the effects of mate tea (MT) [Ilex paraguariensis] on alveolar socket healing after tooth extraction. Sixteen male rats were divided into MT and control groups. MT was administered by intragastric gavage at a dose of 20 mg/kg/day for 28 days before and 28 days after right maxillary incisor extraction. The control group received an equal volume of water. Histopathological and histometric analysis of the neoformed bone area and osteocyte density were performed, as well as immunohistochemical analysis of osteocalcin (OCN), receptor activator of nuclear factor kappa-B ligand (RANKL), osteoprotegerin (OPG), tartrate-resistant acid phosphatase (TRAP), and manganese superoxide dismutase (MnSOD) in the alveolar socket. Calcium, phosphorus, alkaline phosphatase (ALP) activity, total antioxidant capacity (TAC), and malondialdehyde (MDA) were measured in plasma, whereas TRAP activity was determined in serum. Histometry evidenced an increase in bone area (P alveolar socket healing on day 28 after tooth extraction. Regular MT ingestion improves the antioxidant defenses and bone formation, which is beneficial for alveolar socket bone healing after tooth extraction.

  7. Maxillary advancement using distraction osteogenesis with intraoral device.

    Science.gov (United States)

    Takigawa, Yoko; Uematsu, Setsuko; Takada, Kenji

    2010-11-01

    This article describes the surgical orthodontic treatment of maxillary hypoplasia in a patient with cleft lip and palate using maxillary distraction osteogenesis with internal maxillary distractors. Maxillary advancement was performed to correct the retrusive maxillary facial profile and Class III malocclusion. Rotational movement of the distraction segment was made to correct the upper dental midline. Although maxillary advancement was insufficient because of unexpected breakage of the intraoral distractor after completion of the distraction, skeletal traction with a face mask compensated for the shortage. Successful esthetic improvement and posttreatment occlusal stability were achieved with no discernible relapse after 2 years of retention.

  8. A case report of mucoid retention cyst in maxillary sinus

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Han Pyoung [College of Dentistry, Seoul National University, Seoul (Korea, Republic of)

    1973-11-15

    The author have observed mucoid retention cyst in the right maxillary sinus of the patient, 41 year old woman, complained discharging of purulent exudate on the right maxillary molar area, and obtained the following conclusions; 1. The mucoid retention cyst in maxillary sinus casts a faint dome shaped shadow into the radiolucent image of maxillary sinus. 2. The mucoid retention cyst in maxillary sinus may occurred without the history of trauma. 3. Intraoral standard films are also valuable for the interpretation of the lesions in maxillary sinus but only extraoral roentgenograms.

  9. Rehabilitation of large maxillary defect with two-piece maxillary obturators

    Directory of Open Access Journals (Sweden)

    Kanchan P Dholam

    2015-01-01

    Full Text Available The insertion and removal of an obturator in large maxillary defects with or without trismus is difficult. Fabrication of a two-piece obturator in such cases overcomes this problem. This article describes rehabilitation of large maxillary defects with two piece maxillary obturator of three types. All these obturators have a maxillary plate and a bulb component, which are approximated together by various techniques namely, silicone cover, embedded magnets, and press studs. Prosthetic rehabilitation of large maxillary defects with two-piece obturators offers the possibility of adequate oral rehabilitation by fabricating light weight prosthesis, which is easy to use. The bulb covers the undercut areas of the defect enhancing the facial contour and retention. It facilitates easy examination of underlying tissues, recreation of the anatomic barrier between the oral and nasal cavities and restoration of the function and esthetics. Thus, it adds to the quality of life.

  10. Maxillary unicystic ameloblastoma: a case report.

    Science.gov (United States)

    Agani, Zana; Hamiti-Krasniqi, Vjosa; Recica, Jehona; Loxha, Mergime Prekazi; Kurshumliu, Fisnik; Rexhepi, Aida

    2016-10-18

    Ameloblastoma is a benign epithelial odontogenic tumor. It is often aggressive and destructive, with the capacity to attain great size, erode bone and invade adjacent structures. Unicystic ameloblastoma is a rare odontogenic lesion, with clinical, radiographic and gross features of jaw cysts. The lesion histologically shows typical ameloblastomatous epithelium lining part of the cyst cavity with or without and/or mural tumor growth. Unicystic ameloblastoma usually presents in posterior mandibular ramus region, while it is rare and atypical in posterior maxillary region. . We report a case of 16 year old Kosovar male, Albanian ethnicity, who presented with a swelling located in right maxillary region. Clinical examination revealed a painless swelling extending from the maxillary right central incisor to the maxillary right first molar tooth. Panoramic radiograph disclosed a well corticated unilocular radiolucent lesion approximately 5 × 5 cm in diameter which was in contact with the roots of the teeth present inferiorly and with the maxillary sinus superiorly. Maxillary right canine impaction was noted and unerupted lateral incisor tooth was present inside the radiolucency. Preoperative diagnosis of the lesion was made as dentigerous cyst based on the age of the patient, location of the swelling, clinical and radiographic findings, but the unicystic ameloblastoma was also taken into consideration. The patient was treated by surgical enucleation of the lesion and extraction of lateral incisor tooth which was present inside the lesion. The histopathological examination of the lesion revealed confirmed finding for unicystic ameloblastoma mural form. No recurrence was observed in 1 year follow-up. Maxillary region is considered a rare and atypical location for unicystic ameloblastoma. We emphasize the importance of differential diagnosis of an odontogenic lesion with common clinical and radiological features that will impact the treatment planning and follow up

  11. Injerto de tejido conectivo subpediculado con utilización de hidroxiapatita para aumento de reborde alveolar: reporte de un caso

    Directory of Open Access Journals (Sweden)

    Antonio José Díaz Caballero

    2013-10-01

    with marked bone loss in the anterior maxillary secondary to periodontal inflammatory processes with the subsequent loss of teeth premature organs, which leads to a loss of bone. It underwent surgery taking pieces of connective tissue donated by the same patient with the subsequent use of porous hydroxyapatite in the receiving area, thus increasing the roll which was atrophic. Furthermore, a successful response to biological materials and procedure, with an adequate clinical and radiographic response, it is recommended to use this material in the treatment of bone defects in vestibular aspects for its biocompatibility, because of its similarity to the bone. Whereas that open new horizons with the use of this material in this kind of condition.Keywords: Alveolar atrophy; connective tissue graft; Hydroxyapatite; alveolar ridge augmentation.

  12. [Radiologic picture of maxillary sinus aspergilloma].

    Science.gov (United States)

    Kaczmarek, I; Bilska, J; Osmola, K; Nowaczyk, M T

    2010-06-01

    Mycotic infection of paranasal sinus could be the etiological factor of chronic sinusitis. The increase in number of fungal sinusitis cases have been reported recently among nonimmunocompromised patient after endodontic treatment of maxillary teeth. Nonspecific clinical signs and incorrect radiologic pictures interpretation as well as loss of therapeutic standards seems to be the cause of false negative diagnosis and difficulties in treatment of fungal sinusitis. Clinical and radiological picture of maxillary sinus aspergillosis was described in this paper. In the period of 2006-2009 in the Department of Maxillo-Facial Surgery 19 patient with fungal maxillary sinusitis was treated. The endodontic treatment of maxillary teeth of the related side was performed previously in 80% examined cases. In 2 cases there were immunocompromised patients with immunosuppressive treatment. In 16 cases patients were referred to our Department due to metallic foreign body of the maxillary sinus. Routine diagnostic radiological imaging was performed in each case: paranasal sinus view--Water's view and panoramic radiograph (orthopantomograph). In 4 cases imaging was extended with computer tomography (CT) visualization. The surgical treatment was performed in each case. The final diagnosis was puted on histopathological examination and fungal culture. In 16 cases of analysed group histopathological examination and fungal culture revealed aspergilosis. In 2 cases fungal culture was negative, but histopathology slices confirm presence of hyphae of Aspergillus. In 1 case the root canal sealer was found in the maxillary sinus. In none case invasive form of aspergillosis was confirmed. In all cases Water's view of paranasal sinuses and ortopantomograph showed partially or totally clouded sinus with well-defined, single or multifocal radiopaque object similar to metallic foreign body. Characteristic finding in CT imaging was well-defined radiodence concretions that have been attributed to

  13. Deoxypyridinoline level in gingival crevicular fluid as alveolar bone loss biomarker in periodontal disease

    Directory of Open Access Journals (Sweden)

    Agustin Wulan Suci Dharmayanti

    2012-06-01

    Full Text Available Background: Periodontal diseases have high prevalence in Indonesia. They are caused by bacteria plaque that induced host response to release pro inflammatory mediator. Pro inflammatory mediators and bacteria product cause degradation of collagen fibers in periodontal tissue. Deoxypyridinoline is one of pyridinoline cross-link of collagen type I that can be used as biomarker in bone metabolic diseases, however, their contribution to detect alveolar bone loss in periodontal diseases remains unclear. Purpose: This study was to evaluate deoxypyridinoline level in gingival crevicular fluid as alveolar bone loss biomarker on periodontal disease. Methods: This study used 24 subjects with periodontal diseases and 6 healthy subjects. Dividing of periodontal disease was based on index periodontal. Gingival crevicular fluid was taken at mesial site of maxillary posterior tooth by paper point and deoxypyridinoline be measured by ELISA technique. Results: We found increasing of deoxypyridinoline level following of the severity of periodontal diseases. There was also significant difference between healthy subjects and periodontal diseases subjects (p<0.05. Conclusion: Deoxypyridinoline level in gingiva crevicular fluid can be used as alveolar bone loss biomarker in periodontal disease subjects.Latar belakang: Prevalensi penyakit periodontal di Indonesia cukup tinggi. Ini disebabkan oleh bakteri plak yang merangsang respon tubuh untuk mengeluarkan mediator keradangan. Mediator keradangan dan produk bakteri menyebabkan degradasi serat kolagen jaringan periodontal. Deoksipiridinolin merupakan salah satu ikatan piridinium dari kolagen tipe I yang dapat digunakan sebagai biomarker penyakit metabolisme tubuh. Akan tetapi, penggunaan deoksipiridinolin untuk mendeteksi kehilangan tulang alveolar pada penyakit periodontal masih belum jelas. Tujuan: Tujuan penelitian ini untuk mengetahui bahwa kadar deoksipiridinolin pada cairan krevikular gingival dapat digunakan

  14. Multibreath alveolar oxygen tension imaging.

    Science.gov (United States)

    Clapp, Justin; Hamedani, Hooman; Kadlecek, Stephen; Xin, Yi; Shaghaghi, Hoora; Siddiqui, Sarmad; Rossman, Milton D; Rizi, Rahim R

    2016-10-01

    This study tested the ability of a multibreath hyperpolarized HP (3) He MRI protocol to increase the accuracy of regional alveolar oxygen tension (PA O2 ) measurements by lessening the influence of gas-flow artifacts. Conventional single-breath PA O2 measurement has been susceptible to error induced by intervoxel gas flow, particularly when used to study subjects with moderate-to-severe chronic obstructive pulmonary disease (COPD). Both single-breath and multibreath PA O2 imaging schemes were implemented in seven human subjects (one healthy, three asymptomatic smokers, and three COPD). The number and location of voxels with nonphysiologic PA O2 values generated by intervoxel gas flow were compared between the two protocols. The multibreath scheme resulted in a significantly lower total percentage of nonphysiologic PA O2 values (6.0%) than the single-breath scheme (13.7%) (P = 0.006). PA O2 maps showed several patterns of gas-flow artifacts that were present in the single-breath protocol but mitigated by the multibreath approach. Multibreath imaging also allowed for the analysis of slow-filling areas that presented no signal after a single breath. A multibreath approach enhances the accuracy and completeness of noninvasive PA O2 measurement by significantly lessening the proportion of nonphysiologic values generated by intervoxel gas flow. Magn Reson Med 76:1092-1101, 2016. © 2015 Wiley Periodicals, Inc. © 2015 Wiley Periodicals, Inc.

  15. Volumetric Changes in Edentulous Alveolar Ridge Sites Utilizing Guided Bone Regeneration and a Custom Titanium Ridge Augmentation Matrix (CTRAM)

    Science.gov (United States)

    2016-06-01

    scan is standard pre-surgical clinical procedure used to assess jaw dimensions and plan implant placement. It is also recommended by the AAOMR to use...to complete a HCG urinalysis prior to the surgical procedure. If the results of the HCG test are positive, the surgery will be deferred until after...pregnancy and thus the subject will be exited from the study. Prior to surgical procedure, in line with standard procedure at the Periodontics

  16. Multidisciplinary management of subgingival crown-root fracture of an immature permanent maxillary central incisor

    Directory of Open Access Journals (Sweden)

    Samir Zahedpasha

    2012-01-01

    Full Text Available This case report describes the multidisciplinary management of subgingival horizontal crown-root fracture of an immature permanent maxillary central incisor in a 10-year-old boy. After removal of the fractured fragment, pulpotomy was performed within 48 h from the injury to promote apexogenesis. The tooth was orthodontically extruded until the fracture line was located above the alveolar bone level. Frenectomy, supracrestal fiberotomy, and crown lengthening were performed after adequate stabilization of the extruded tooth for 5 months. Finally, the tooth was restored with composite resin by using the acid etch technique. This report highlights that a multidisciplinary treatment approach with strict cooperation among specialists to manage a complicated crown-root fracture can save and restore a traumatized immature permanent tooth.

  17. Vascularization of the gray whale palate (Cetacea, Mysticeti, Eschrichtius robustus): soft tissue evidence for an alveolar source of blood to baleen.

    Science.gov (United States)

    Ekdale, Eric G; Deméré, Thomas A; Berta, Annalisa

    2015-04-01

    The origin of baleen in mysticetes heralded a major transition during cetacean evolution. Extant mysticetes are edentulous in adulthood, but rudimentary teeth develop in utero within open maxillary and mandibular alveolar grooves. The teeth are resorbed prenatally and the alveolar grooves close as baleen germ develops. Arteries supplying blood to highly vascularized epithelial tissue from which baleen develops pass through lateral nutrient foramina in the area of the embryonic alveolar grooves and rudimentary teeth. Those vessels are hypothesized to be branches of the superior alveolar artery, but branches of the greater palatine arteries may play a role in the baleen vascularization. Through a combination of latex injection, CT, and traditional dissection of the palate of a neonatal gray whale (Eschrichtius robustus), we confirm that the baleen receives blood from vessels within the superior alveolar canal via the lateral foramina. The greater palatine artery is restricted to its own passage with no connections to the baleen. This study has implications for the presence of baleen in extinct taxa by identifying the vessels and bony canals that supply blood to the epithelium from which baleen develops. The results indicate that the lateral foramina in edentulous mysticete fossils are bony correlates for the presence of baleen, and the results can be used to help identify bony canals and foramina that have been used to reconstruct baleen in extinct mysticetes that retained teeth in adulthood. Further comparisons are made with mammals that also possess oral keratin structures, including ruminants, ornithorhynchid monotremes, and sirenians. © 2015 Wiley Periodicals, Inc.

  18. Management of Cleft Maxillary Hypoplasia with Anterior Maxillary Distraction: Our Experience.

    Science.gov (United States)

    Chacko, Tojan; Vinod, Sankar; Mani, Varghese; George, Arun; Sivaprasad, K K

    2014-12-01

    Maxillary hypoplasia is a common developmental problem in cleft lip and palate deformities. Since 1970s these deformities have traditionally been corrected by means of orthognathic surgery. Management of skeletal deformities in the maxillofacial region has been an important challenge for maxillofacial surgeons and orthodontists. Distraction osteogenesis is a surgical technique that uses body's own repairing mechanisms for optimal reconstruction of the tissues. We present four cases of anterior maxillary distraction osteogenesis with tooth borne distraction device-Hyrax, which were analyzed retrospectively for the efficacy of the tooth borne device-Hyrax and skeletal stability of distracted anterior maxillary segment.

  19. endodontic treatment of unusually long discolored maxillary central ...

    African Journals Online (AJOL)

    a few cases of dual–rooted maxillary central incisor have been reported in literature1-5. Maxillary central incisors vary in root ... The following case report describes the endodontic management of a patient with an unusually long maxillary central incisor in our environment. CASE PROFILE. A 31 year-old male was referred ...

  20. Maxillary palp glomeruli and ipsilateral projections in the antennal ...

    Indian Academy of Sciences (India)

    Maxillary palp glomeruli and ipsilateral projections in the antennal lobe of Drosophila melanogaster. K P Rajashekhar V R ... The number of glomeruli receiving the maxillary palp sensory projections tallies with the number of Drosophila olfactory receptors (seven) reported to be expressed exclusively in the maxillary palp.

  1. Maxillary "All-On-Four" treatment using zygomatic implants. A mechanical analysis.

    Science.gov (United States)

    de Moraes, P H; Olate, S; Nóbilo, M de Arruda; Asprino, L; de Moraes, M; Barbosa, J de Albergaría

    2016-04-01

    Zygomatic implants may be used for dental rehabilitation in atrophic maxillae. The aim of this study was to establish experimentally the areas of stress distribution using 2 kinds of "All-On-Four" maxillary procedures. The best position to insert the implants was selected using polyurethane craniomaxillary models and surgical guides were made. Group 1 was designed with two posterior zygomatic implants and two conventional anterior implants, and group 2 with two posterior zygomatic implants and two anterior zygomatic implants. A titanium bar was built to link the 4 implants in both groups. Photoelastic replicas of these models were made and the implants were inserted using the surgical guides. An Instrom 4411 testing machine was used to perform a unilateral compressive loading at the level of the right first molar until 2mm of displacement was obtained. Group 1 showed a high strain concentration in the right lateral orbital region at the level of the apex of the zygomatic implant. Less strain was noticed at the apical levels of the conventional implants in the anterior sector and of the contralateral zygomatic implant. Group 2 showed high strains in the lateral inferior orbital area. The load was low in the alveolar bone sector. Zygomatic bone and paranasal structures are loaded at high levels when zygomatic implants are used to stabilize a full maxillary prosthodontic rehabilitation on 4 implants. The use of 4 zygomatic implants loads the alveolar bone to a lower extent and seems better suited from a mechanical point of view than the use of 2 zygomatic implants. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  2. Macrodontic maxillary incisor in alagille syndrome

    Directory of Open Access Journals (Sweden)

    Mauro Cozzani

    2012-01-01

    Full Text Available This case report describes the surgical-orthodontic guided-eruption of a deeply impacted macrodontic maxillary central incisor in a 10-year-old patient with Alagille syndrome (ALGS. In the first stage, orthodontic treatment with fixed appliance on deciduous teeth allowed to create enough space for the eruption of the maxillary right central incisor. The second stage included closed surgical exposure and vertical traction. After impacted tooth erupted in the proper position, accessory periodontal treatment and dental reshaping procedures may be indicated to camouflage macrodontic incisor with the adjacent teeth. This is the first report that presents a patient with ALGS undergoing orthodontic and surgical treatment.

  3. Le Fort I distraction using internal devices for maxillary hypoplasia in patients with cleft lip, palate, and alveolus: complications and their prevention and management.

    Science.gov (United States)

    Mitsukawa, Nobuyuki; Satoh, Kaneshige; Morishita, Tadashi

    2010-09-01

    In recent years, advancement has been made in distraction osteogenesis in the facial area. It has been applied actively to treat maxillary hypoplasia in patients with cleft lip, palate, and alveolus. Le Fort I distraction using internal devices does not lead to disability in daily living, including during the retention period, and has low surgical invasiveness, facile management, and superior aesthetics. Thus, there have been occasional reports on this procedure in recent years. Because an internal device is unidirectional, the greatest disadvantage is the inability to adjust the direction of distraction after its placement. However, past reports have emphasized its advantages, and its complications have rarely been discussed. We performed Le Fort I distraction using internal devices on 15 young patients. Our results showed notable complications in a few cases. When serial cephalometric analysis was performed after maxillary distraction, it demonstrated that the maxilla assumes various three-dimensional distraction morphologies. In particular, cases with insufficient bone grafting of alveolar clefts developed collapse mainly in the alveolar cleft region during postoperative distraction. Mobility and deviation of the maxillary bone fragment occurred. We implemented preventative measures against complications such as using modifications to place the devices parallel on the left and right sides and using a bite splint for distraction. These measures produced improved outcomes, and we describe here the details.

  4. [Cleft lip, alveolar and palate sequelae. Proposal of new alveolar score by the Alveolar Cleft Score (ACS) classification].

    Science.gov (United States)

    Molé, C; Simon, E

    2015-06-01

    The management of cleft lip, alveolar and palate sequelae remains problematic today. To optimize it, we tried to establish a new clinical index for diagnostic and prognostic purposes. Seven tissue indicators, that we consider to be important in the management of alveolar sequelae, are listed by assigning them individual scores. The final score, obtained by adding together the individual scores, can take a low, high or maximum value. We propose a new classification (ACS: Alveolar Cleft Score) that guides the therapeutic team to a prognosis approach, in terms of the recommended surgical and prosthetic reconstruction, the type of medical care required, and the preventive and supportive therapy to establish. Current studies are often only based on a standard radiological evaluation of the alveolar bone height at the cleft site. However, the gingival, the osseous and the cellular areas bordering the alveolar cleft sequelae induce many clinical parameters, which should be reflected in the morphological diagnosis, to better direct the surgical indications and the future prosthetic requirements, and to best maintain successful long term aesthetic and functional results. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  5. Effectiveness of platelet-rich fibrin in the management of pain and delayed wound healing associated with established alveolar osteitis (dry socket).

    Science.gov (United States)

    Sharma, Ashish; Aggarwal, Nimish; Rastogi, Sanjay; Choudhury, Rupshikha; Tripathi, Siddhi

    2017-01-01

    To assess the efficacy of platelet-rich fibrin (PRF) on the pain and healing of the extraction socket related with established alveolar osteitis (dry socket, AO) after the removal of maxillary and mandibular molars. One hundred consecutive adult patients with age group ranging from 18 to 40 years along with established dry socket after maxillary and mandibular molar extractions who have not received any treatment for the same were included in this single-arm clinical trial. PRF was placed in the maxillary and mandibular molar extraction sockets after adequate irrigation of the socket. All the patients evaluated for the various study variables which include pain, degree of inflammation, and healthy granulation tissue formation (wound healing) at the 1 st , 3 rd , 7 th , and 14 th post-PRF placement day in the alveolar socket. Data were analyzed using Shapiro-Wilk's test, Chi-square test and/or Student's t -test, Friedman's test, Wilcoxon signed-rank test, and Bonferroni test, with the significance level set at P healing by the end of the 2 nd week. The use of PRF in this clinical trial illustrates the promising results in terms of reduced pain and better healing in the patients with sustained AO.

  6. Orthopantomographic study of the alveolar bone level on periodontal disease

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ki Sik; You, Dong Soo [College of Dentistry, Seoul National University, Seoul (Korea, Republic of)

    1972-11-15

    The author had measured the alveolar bone level of periodontal disease on 50 cases of orthopantomogram to detect the degree of alveolar bone resorption of both sexes of Korean. The results were obtained as follows; 1. Alveolar bone resorption of mesial and distal portion was similar in same patient. 2. The order of alveolar bone resorption was mandibular anterior region, posterior region, canine and premolar region of both jaws. 3. The degree of alveolar bone destruction was severe in shorter root length than longer one. 4. The degree of alveolar bone resorption was severe in fourth decades.

  7. Orthopantomographic study of the alveolar bone level on periodontal disease

    International Nuclear Information System (INIS)

    Lee, Ki Sik; You, Dong Soo

    1972-01-01

    The author had measured the alveolar bone level of periodontal disease on 50 cases of orthopantomogram to detect the degree of alveolar bone resorption of both sexes of Korean. The results were obtained as follows; 1. Alveolar bone resorption of mesial and distal portion was similar in same patient. 2. The order of alveolar bone resorption was mandibular anterior region, posterior region, canine and premolar region of both jaws. 3. The degree of alveolar bone destruction was severe in shorter root length than longer one. 4. The degree of alveolar bone resorption was severe in fourth decades.

  8. Perawatan Ortodontik Gigi Anterior Berjejal dengan Tulang Alveolar yang Tipis

    Directory of Open Access Journals (Sweden)

    Miesje K. Purwanegara

    2015-09-01

    Full Text Available Anterior teeth movement in orthodontic treatment is limited to labiolingual direction by very thin alveolar bone. An uncontrolled anterior tooth movement to labiolingual direction can cause alveolar bone perforation at its root segment. This case report is to remind us that alveolar bone thickness limits orthodontc tooth movement. A case of crowded anterior teeth with thin alveolar bone in malocclusion I is reported. This case is treated using adgewise orthodontic appliance. Protraction of anterior teeth is anticipated due to thin alveolar bone on the anterior surface. The conclusion is although the alveolar bone surrounding the crowded anterior teeth is thin, by controlling the movement the teeth reposition is allowed.

  9. Modified custom made J-hook for maxillary protraction in a rapid maxillary expansion appliance

    Directory of Open Access Journals (Sweden)

    Jithesh Kumar Kodoth

    2014-01-01

    Full Text Available A simple yet innovative attaching the J-hook along with an rapid maxillary appliance for the protraction of maxilla is presented. The proposed method not only simplifies construction but also is equally effective.

  10. Root Length and Anatomy of Impacted Maxillary Canines in Patients with Unilateral Maxillary Canine Impaction

    OpenAIRE

    Mostfa Shahabi; Maryam Omidkhoda; Seyedeh Haniyeh Omidi; Seyed Hosein Hoseini Zarch

    2017-01-01

    Introduction: Canine impaction is a common occurrence. In this study, we sought to investigate the root anatomy and length of impacted canines and lateral incisor adjacent to impacted maxillary canine. Materials and Methods: In this retrospective study, three-dimensional tomographic imaging was performed on 26 patients with unilateral maxillary canine impaction. In this study, we evaluated root length and anatomy of impacted canines, in terms of resorption intensity and curvature, with Planme...

  11. Partial lateralization of the nasopalatine nerve at the incisive foramen for ridge augmentation in the anterior maxilla prior to placement of dental implants: a retrospective case series evaluating self-reported data and neurosensory testing.

    Science.gov (United States)

    Urban, Istvan; Jovanovic, Sascha A; Buser, Daniel; Bornstein, Michael M

    2015-01-01

    The objective of this study was to assess implant therapy after a staged guided bone regeneration procedure in the anterior maxilla by lateralization of the nasopalatine nerve and vessel bundle. Neurosensory function following augmentative procedures and implant placement, assessed using a standardized questionnaire and clinical examination, were the primary outcome variables measured. This retrospective study included patients with a bone defect in the anterior maxilla in need of horizontal and/or vertical ridge augmentation prior to dental implant placement. The surgical sites were allowed to heal for at least 6 months before placement of dental implants. All patients received fixed implant-supported restorations and entered into a tightly scheduled maintenance program. In addition to the maintenance program, patients were recalled for a clinical examination and to fill out a questionnaire to assess any changes in the neurosensory function of the nasopalatine nerve at least 6 months after function. Twenty patients were included in the study from February 2001 to December 2010. They received a total of 51 implants after augmentation of the alveolar crest and lateralization of the nasopalatine nerve. The follow-up examination for questionnaire and neurosensory assessment was scheduled after a mean period of 4.18 years of function. None of the patients examined reported any pain, they did not have less or an altered sensation, and they did not experience a "foreign body" feeling in the area of surgery. Overall, 6 patients out of 20 (30%) showed palatal sensibility alterations of the soft tissues in the region of the maxillary canines and incisors resulting in a risk for a neurosensory change of 0.45 mucosal teeth regions per patient after ridge augmentation with lateralization of the nasopalatine nerve. Regeneration of bone defects in the anterior maxilla by horizontal and/or vertical ridge augmentation and lateralization of the nasopalatine nerve prior to dental

  12. Palatal Surface Area of Maxillary Plaster Casts

    DEFF Research Database (Denmark)

    Darvann, Tron Andre; Hermann, Nuno V.; Ersbøll, Bjarne Kjær

    2007-01-01

    Objective: To investigate the relationship between corresponding two-dimensional and three-dimensional measurements on maxillary plaster casts taken from photographs and three-dimensional surface scans, respectively. Materials and Methods: Corresponding two-dimensional and three-dimensional measu...

  13. Neonatal maxillary orthopedics: past to present

    NARCIS (Netherlands)

    Kuijpers-Jagtman, A.M.; Prahl, C.; Berkowitz, S.

    2013-01-01

    Neonatal maxillary orthopedics was introduced in the treatment protocol for cleft lip and palate in the 1950s of the last century. A wide range of appliances has been designed with pin-retained active appliances at one end of the spectrum and passive appliances at the other. Although neonatal

  14. Rapid maxillary expansion in contemporary orthodontic literature

    Directory of Open Access Journals (Sweden)

    Sabrina Mutinelli

    2016-01-01

    Full Text Available We have reviewed our retrospective research about rapid maxillary expansion performed in the early mixed dentition to summarize the results of different studies regarding maxillary dental arch width variation and crowding improvement in light of contemporary literature. The aim is to define the effects of treatments followed until the end of dental arch growth. In all studies, a Haas expander anchored to the deciduous dentition was used. The samples consisted of treated patients with and without a lateral crossbite and homogeneous untreated individuals as controls. Two additional control groups of adolescents and adults in dental Class 1 were also compared. As a result of the analysis, rapid maxillary expansion with anchorage to the deciduous dentition was found to be effective in increasing transverse width in intermolar and intercanine areas, and the change was preserved until the full permanent dentition stage. When performed before maxillary lateral incisors have fully erupted, this procedure allows for a rapid increase in the arch length in the anterior area and consequently, in the space available for permanent incisors with a stable reduction in crowding over time.

  15. Maxillary brown tumour: unusual presentation of parathyroid ...

    African Journals Online (AJOL)

    This is a report of a maxillary brown tumour caused by primary hyperparathyroidism (HPT) secondary to parathyroid carcinoma. A 62-year-old man presented with a large swelling in the right maxilla, which caused right-sided nasal obstruction, intermittent bleeding and diplopia. A computed tomography scan demonstrated ...

  16. Maxillary distraction complications in cleft patients.

    Science.gov (United States)

    Jeblaoui, Y; Morand, B; Brix, M; Lebeau, J; Bettega, G

    2010-06-01

    Cleft lip and palate (CLP) patients often present with a class III malocclusion in connection with a three dimensional maxillary hypoplasia. Twenty-five to 60% of these patients need maxillary advancement. Two solutions are possible: orthognathic surgery and maxillary distraction. The purpose of this study was to evaluate the complications of maxillary distraction in CLP patients. Data was collected from the records of patients treated in our surgery unit between 2000 and 2007. Among the eight patients (four male and four female), five presented with a bilateral CLP, two with a unilateral CLP, and one with a unilateral cleft lip associated to a soft palate cleft. The average age at surgery was 17 years. All underwent a Le Fort I osteotomy with a pterygomaxillary disjunction. An external distractor was used for the first two patients and an internal distractor for the six following patients. After a seven-day latency, activation was implemented at a rate of 1mm twice a day. The average period of consolidation was four months. Maxillary advancement ranged between 7 and 19mm, with an average of 12.6mm. The average follow-up was four years. Complications were noted in seven patients: one intra-operative hemorrhage, one avulsion of a tooth anchored at the pterygoid process during osteotomy, three cases of device dysfunction, two cases of significant pain during activation, one loosening of the orthodontic arch in an external system, two cases of labial ulceration, and one maxillary sinusitis due to migration of a wisdom tooth. Complications of maxillary distraction in CLP patients were very frequent. Most were related to the device and did not interfere with the final result. This must be taken into account when indicating distraction and choosing the device. Two types of complications can occur during distraction: those related to the osteotomy and those related to the device. The complications related to the osteotomy are linked to the cicatricial ground of previous

  17. [Maxillary distraction complications in cleft patients].

    Science.gov (United States)

    Jeblaoui, Y; Morand, B; Brix, M; Lebeau, J; Bettega, G

    2008-09-01

    Cleft lip and palate (CLP) patients often present with a class III malocclusion in connection with a three dimensional maxillary hypoplasia. Twenty-five to 60% of these patients require a maxillary advancement. Two solutions are possible: orthognathic surgery and maxillary distraction. The purpose of this study was to evaluate the complications of the maxillary distraction in CLP patients. Data was collected from the records of patients treated at our Surgery Unit between 2000 and 2007. Among the eight patients (four male and four female), five presented a bilateral CLP, two a unilateral CLP and one a unilateral cleft lip associated to a soft palate cleft. The average age at surgery was 17 years old. All had a Le Fort I osteotomy with a pterygomaxillary disjunction. The first two patients had external distractors and the six following internal ones. After a seven-day latency, activation was led to the rate of 1mm per day twice. The period of consolidation was four months on average. The maxillary advancement varied between 7 and 19 mm with an average of 12.6mm. The average follow-up was four years. We encountered difficulties and/or complications in seven patients: one intraoperatively haemorrhage, one avulsion of a tooth fixed at the pterygoid process during the osteotomy, three device failures, two cases of significant pains during activation, one dissociation of the dental anchorage of an external system, two labial ulcerations and one maxillary sinusitis by migration of the 18. Difficulties of maxillary distraction in CLP patients are very frequent. The majority is related to the distractors and did not interfere with the final result. But this frequency must be taken into account in the indication and in the choice of the material. Two types of complications can occur during distraction: those related to the osteotomy and those related to the material. The complications related to the osteotomy are in connection with the cicatricial ground of the CLP. They are

  18. Maxillary sinus floor extension and posterior tooth inclination in adolescent patients with Class II Division 1 malocclusion treated with maxillary first molar extractions

    NARCIS (Netherlands)

    Livas, Christos; Halazonetis, Demetrios J.; Booij, Johan Willem; Pandis, Nikolaos; Tu, Yu-Kang; Katsaros, Christos

    Introduction: Our objective was to investigate potential associations between maxillary sinus floor extension and inclination of maxillary second premolars and second molars in patients with Class II Division 1 malocclusion whose orthodontic treatment included maxillary first molar extractions.

  19. Maxillary sinus floor extension and posterior tooth inclination in adolescent patients with Class II Division 1 malocclusion treated with maxillary first molar extractions

    NARCIS (Netherlands)

    Livas, C.; Halazonetis, D.J.; Booij, J.W.; Pandis, N.; Tu, Y.K.; Katsaros, C.

    2013-01-01

    INTRODUCTION: Our objective was to investigate potential associations between maxillary sinus floor extension and inclination of maxillary second premolars and second molars in patients with Class II Division 1 malocclusion whose orthodontic treatment included maxillary first molar extractions.

  20. Palatal approach of anterior superior alveolar injection technique may not be potentially useful in periodontal procedures.

    Science.gov (United States)

    Bhat, Pragathi Raghavendra; Acharya, Anirudh Balakrishna; Thakur, Srinath Lakshman

    2016-01-01

    The palatal approach of anterior superior alveolar (P-ASA) using WAND injection was reported to effectively provide a profound bilateral maxillary anesthesia of the soft tissue of anterior one-third of the palate and facial gingivae extending from canine to canine which lasted for more than an hour thus making it ideal for scaling root planing and minor periodontal procedures in the anterior maxilla. Our study suggests that the conventional P-ASA injection is of very short duration and the extent of anesthesia was not profound and consistent. This has not been reported earlier in the literature. Thirty-five cases (20 males and 15 females), who underwent scaling, root planing and minor periodontal surgical procedures such as abscess drainage, gingivectomy, and frenectomy in the maxillary anterior region in the age range of 19-45 years was assessed for the efficacy of the P-ASA injection. After the administration of the P-ASA injection, the subjective and the objective symptoms were used to evaluate the extent and duration of the anesthesia at 10, 15, and 20 min. This study suggests that the conventional P-ASA injection technique does not provide anesthesia for more than 20 min. Wilcoxon matched pairs test was used to compare the effect of anesthesia at the different time intervals and the results were found to be statistically significant ( P periodontal surgery of the anterior maxilla.

  1. BoneCeramic graft regenerates alveolar defects but slows orthodontic tooth movement with less root resorption.

    Science.gov (United States)

    Ru, Nan; Liu, Sean Shih-Yao; Bai, Yuxing; Li, Song; Liu, Yunfeng; Wei, Xiaoxia

    2016-04-01

    BoneCeramic (Straumann, Basel, Switzerland) can regenerate bone in alveolar defects after tooth extraction, but it is unknown whether it is feasible to move a tooth through BoneCeramic grafting sites. The objective of this study was to investigate 3-dimensional real-time root resorption and bone responses in grafted sites during orthodontic tooth movement. Sixty 5-week-old rats were randomly assigned to 3 groups to receive BoneCeramic, natural bovine cancellous bone particles (Bio-Oss; Geistlich Pharma, Wolhusen, Switzerland), or no graft, after the extraction of the maxillary left first molar. After 4 weeks, the maxillary left second molar was moved into the extraction site for 28 days. Dynamic bone microstructures and root resorption were evaluated using in-vivo microcomputed tomography. Stress distribution and corresponding tissue responses were examined by the finite element method and histology. Mixed model analysis of variance was performed to compare the differences among time points with Bonferroni post-hoc tests at the significance level of P root resorption volumes and craters, and the highest bone volume fraction, trabecular number, and mean trabecular thickness, followed by the Bio-Oss and the control groups. The highest stress accumulated in the cervical region of the mesial roots. BoneCeramic has better osteoconductive potential and induces less root resorption compared with Bio-Oss grafting and naturally recovered extraction sites. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  2. Reconstruction of supracrestal alveolar bone lost as a result of severe chronic periodontitis. Five-year outcome: case report.

    Science.gov (United States)

    Kotschy, Peter; Laky, Markus

    2006-10-01

    This patient presented with generalized severe chronic periodontitis. Conventional periodontal therapy would have left her compromised esthetically and anatomically, with growing interdental "black triangles." This prompted the authors to try to reconstruct the maxillary alveolar bone that had been lost in the previous three decades because of untreated periodontitis. To maintain the level and quality of the gingival margin, open flap surgery was performed in the maxilla soon after scaling and root planing. To gain access to the roots and bone surfaces, a flap was raised by intrasulcular incisions and the modified and simplified papilla preservation technique. After debridement, the root surfaces were conditioned and enamel matrix proteins were applied. Bovine bone mineral was placed in the infrabony defects and supracrestally (buccally, lingually, and interdentally) to help regenerate the lost alveolar bone. In addition, the defects around the maxillary anterior teeth were covered with a membrane. To prevent shrinkage of the gingiva, suspensory sutures were placed on the right central incisor and both left incisors so that the anterior flap would be positioned approximately 3 mm coronally. After surgery, the patient was advised to apply 1% chlorhexidine gel twice a day and to avoid brushing the surgical site for 4 weeks. Professional maintenance care was administered twice a week for 2 months and the patient was instructed to maintain a liquid diet for 4 weeks. The treatment outcome was evaluated clinically and radiographically at regular intervals for 5 years postsurgically. Periodontal conditions were stable and fulfilled the patient's desire to eliminate the pockets without compromising esthetics, particularly in the maxillary anterior.

  3. Is ridge preservation/augmentation at periodontally compromised extraction sockets safe? A retrospective study.

    Science.gov (United States)

    Kim, Jung-Ju; Ben Amara, Heithem; Schwarz, Frank; Kim, Hae-Young; Lee, Jung-Won; Wikesjö, Ulf M E; Koo, Ki-Tae

    2017-10-01

    This study aimed to evaluate the safety of ridge preservation/augmentation procedures when performed at compromised extraction sockets. Patients subject to ridge preservation/augmentation at periodontally compromised sockets at Seoul National University Dental Hospital (SNUDH) were evaluated in a chart review. Tooth extractions due to acute infection were not included in our study as chronically formed lesions are the only lesions that can be detected from radiographic images. If inflammatory symptoms persisted following ridge preservation/augmentation and antimicrobial and anti-inflammatory therapy, the patient was categorized as a re-infection case and implanted biomaterial removed. Of 10,060 patients subject to tooth extractions at SNUDH, 2011 through 2015, 297 cases meeting inclusion criteria were reviewed. The severity and type of lesions were not specific because extracting data was only done by radiographic images and chart records. The review identified eight patients exhibiting inflammatory symptoms that required additional antimicrobial and anti-inflammatory therapy. Within this group, re-infection occurred in two patients requiring biomaterials removal. The final safety rate for the ridge preservation/augmentation was 99.3%. None of the demographic factors, systemic conditions or choice of biomaterial affected the safety of ridge preservation/augmentation. Alveolar ridge preservation/augmentation at periodontally compromised sockets appears safe following thorough removal of infectious source. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  4. Gene expression profile altered by orthodontic tooth movement during healing of surgical alveolar defect.

    Science.gov (United States)

    Choi, Eun-Kyung; Lee, Jae-Hyung; Baek, Seung-Hak; Kim, Su-Jung

    2017-06-01

    We explored the gene expression profile altered by orthodontic tooth movement (OTM) during the healing of surgical alveolar defects in beagles. An OTM-related healing model was established where a maxillary second premolar was protracted into the critical-sized defect for 6 weeks (group DT6). As controls, natural healing models without OTM were set at 2 weeks (group D2) and at 6 weeks (group D6) after surgery. Total RNAs were extracted from dissected tissue blocks containing the regenerated defects and additionally from sound alveolar bone as a baseline (group C). mRNA profiling was performed using microarray analysis. Functional annotations of gene clusters based on differentially expressed genes among groups indicated that the gene expression profile of group DT6 had a stronger similarity to that of group D2 than to group D6. The genes participating in high woven-bone fraction in group DT6 could be identified as TNFSF11, MMP13, SPP1, and DMP1, which were verified by quantitative real-time polymerase chain reactions. We investigated at the gene level that OTM can affect the healing state of surgical defects serving as favorable matrices for OTM with defect regeneration. It would be a basis on selecting putative genes to be therapeutically applied for tissue-friendly accelerated orthodontics in the future. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  5. Cola beverage consumption delays alveolar bone healing: a histometric study in rats

    Directory of Open Access Journals (Sweden)

    Juliana Mazzonetto Teófilo

    2010-06-01

    Full Text Available Epidemiological studies have suggested that cola beverage consumption may affect bone metabolism and increase bone fracture risk. Experimental evidence linking cola beverage consumption to deleterious effects on bone is lacking. Herein, we investigated whether cola beverage consumption from weaning to early puberty delays the rate of reparative bone formation inside the socket of an extracted tooth in rats. Twenty male Wistar rats received cola beverage (cola group or tap water (control group ad libitum from the age of 23 days until tooth extraction at 42 days and euthanasia 2 and 3 weeks later. The neoformed bone volume inside the alveolar socket was estimated in semi-serial longitudinal sections using a quantitative differential point-counting method. Histological examination suggested a decrease in the osteogenic process within the tooth sockets of rats from both cola groups, which had thinner and sparser new bone trabeculae. Histometric data confirmed that alveolar bone healing was significantly delayed in cola-fed rats at three weeks after tooth extraction (ANOVA, p = 0.0006, followed by Tukey's test, p < 0.01. Although the results of studies in rats cannot be extrapolated directly to human clinical dentistry, the present study provides evidence that cola beverage consumption negatively affect maxillary bone formation.

  6. Three dimensional evaluation of alveolar bone changes in response to different rapid palatal expansion activation rates

    Directory of Open Access Journals (Sweden)

    Brian LaBlonde

    Full Text Available ABSTRACT Introduction: The aim of this multi-center retrospective study was to quantify the changes in alveolar bone height and thickness after using two different rapid palatal expansion (RPE activation protocols, and to determine whether a more rapid rate of expansion is likely to cause more adverse effects, such as alveolar tipping, dental tipping, fenestration and dehiscence of anchorage teeth. Methods: The sample consisted of pre- and post-expansion records from 40 subjects (age 8-15 years who underwent RPE using a 4-banded Hyrax appliance as part of their orthodontic treatment to correct posterior buccal crossbites. Subjects were divided into two groups according to their RPE activation rates (0.5 mm/day and 0.8 mm/day; n = 20 each group. Three-dimensional images for all included subjects were evaluated using Dolphin Imaging Software 11.7 Premium. Maxillary base width, buccal and palatal cortical bone thickness, alveolar bone height, and root angulation and length were measured. Significance of the changes in the measurements was evaluated using Wilcoxon signed-rank test and comparisons between groups were done using ANOVA. Significance was defined at p ≤ 0.05. Results: RPE activation rates of 0.5 mm per day (Group 1 and 0.8 mm per day (Group 2 caused significant increase in arch width following treatment; however, Group 2 showed greater increases compared to Group 1 (p < 0.01. Buccal alveolar height and width decreased significantly in both groups. Both treatment protocols resulted in significant increases in buccal-lingual angulation of teeth; however, Group 2 showed greater increases compared to Group 1 (p < 0.01. Conclusion: Both activation rates are associated with significant increase in intra-arch widths. However, 0.8 mm/day resulted in greater increases. The 0.8 mm/day activation rate also resulted in more increased dental tipping and decreased buccal alveolar bone thickness over 0.5 mm/day.

  7. Tissue engineering for lateral ridge augmentation with recombinant human bone morphogenetic protein 2 combination therapy: a case report.

    Science.gov (United States)

    Mandelaris, George A; Spagnoli, Daniel B; Rosenfeld, Alan L; McKee, James; Lu, Mei

    2015-01-01

    This case report describes a tissue-engineered reconstruction with recombinant human bone morphogenetic protein 2/acellular collagen sponge (rhBMP-2/ ACS) + cancellous allograft and space maintenance via Medpor Contain mesh in the treatment of a patient requiring maxillary and mandibular horizontal ridge augmentation to enable implant placement. The patient underwent a previously unsuccessful corticocancellous bone graft at these sites. Multiple and contiguous sites in the maxilla and in the mandibular anterior, demonstrating advanced lateral ridge deficiencies, were managed using a tissue engineering approach as an alternative to autogenous bone harvesting. Four maxillary and three mandibular implants were placed 9 and 10 months, respectively, after tissue engineering reconstruction, and all were functioning successfully after 24 months of follow-up. Histomorphometric analysis of a bone core obtained at the time of the maxillary implant placement demonstrated a mean of 76.1% new vital bone formation, 22.2% marrow/cells, and 1.7% residual graft tissue. Tissue engineering for lateral ridge augmentation with combination therapy requires further research to determine predictability and limitations.

  8. Analysis of the prevalence of different topographical characteristics of the residual ridge in mandibular free-end arches Análise da prevalência de diferentes características topográficas do rebordo residual em arcos mandibulares com extremidades livres

    Directory of Open Access Journals (Sweden)

    Carlos Gramani Guedes

    2004-03-01

    Full Text Available This study observed the prevalence of different types of residual ridge inclination in free-ends of mandibles and reported possible correlative factors that may affect resorption. For this purpose, periapical radiographs and individual data collected from a sample of 64 hemiarches were used. Two radiographs were taken of each free-end, and tracing was employed to determine the angles formed by the resorption configuration in the area of the 1st mandibular molar. The following conclusions were drawn: 1 the great majority of alveolar ridges were distally descending; 2 the average angle was wider for users of mandibular removable partial dentures; 3 the results obtained suggest that the type of opposing maxillary arch affects the inclination of mandibular ridges; 4 greater inclination was observed when the 2nd bicuspids of the mandible were the abutment teeth; 5 no significant correlation was established between age, sex and residual ridge resorption.Esta pesquisa constatou a prevalência dos tipos de rebordos residuais no sentido ântero-posterior em extremidades livres inferiores, além de correlacionar alguns fatores que possam influenciar as suas reabsorções. Para isso, utilizamos radiografias periapicais e dados individuais colhidos na amostra de 64 hemiarcos; foram obtidas 2 radiografias de cada área de extremidade livre e, a partir de traçados, determinamos os ângulos formados pela reabsorção na altura do 1º molar inferior. Podemos constatar que: 1º a grande maioria de inclinação encontrada foi de rebordos descendentes para distal; 2º a média de angulação foi maior para usuários de prótese parcial removível inferior; 3º os resultados sugeriram existir influência do tipo de arco antagônico superior na inclinação dos rebordos inferiores; 4º observou-se aumento de inclinação quando os segundos pré-molares inferiores eram os dentes adjacentes ao espaço protético; e 5º não foram encontradas correla

  9. Measuring mandibular ridge reduction

    International Nuclear Information System (INIS)

    Steen, W.H.A.

    1984-01-01

    This thesis investigates the mandibular reduction in height of complete denture wearers and overdenture wearers. To follow this reduction in the anterior region as well as in the lateral sections of the mandible, an accurate and reproducible measuring method is a prerequisite. A radiologic technique offers the best chance. A survey is given of the literature concerning the resorption process after the extraction of teeth. An oblique cephalometric radiographic technique is introduced as a promising method to measure mandibular ridge reduction. The reproducibility and the accuracy of the technique are determined. The reproducibility in the positioning of the mandible is improved by the introduction of a mandibular support which permits a precise repositioning of the edentulous jaw, even after long periods of investigation. (Auth.)

  10. Relationships between bitewing and periapical radiographs in assessing crestal alveolar bone level

    International Nuclear Information System (INIS)

    Cho, Yong Jin; Park, Tae Won

    1985-01-01

    Bitewing and periapical radiographic techniques are used in clinical and epidermiological studies to assess crest alveolar bone levels. The purpose of the present study investigated relationships between these techniques by assessing alveolar crest location at the same site. Bitewing and periapical radiographs were available from posterior quadrants of 120 subjects. The distance from cemento-enamel junction to the alveolar crest (CEJ-CR) was measured for each proximal surface from the distal of the cuspid to the distal of the second molar. Data were arranged according to the proximal surface examined, and bitewing and periapical measurements were compared using paired t tests. 1. In maxilla, a significant t ratio with a P value of 0.05 or less was reached for 78% and in mandible reached for 39% .2. Person correlations were calculated 32 surfaces (89%) had values below 0.70 and so, data obtained by these techniques can not be used interchangeably on an individual or group basis. 3. In situations where the periapical measure was greater than the bitewing, it ranged up to 20.7% greater with a mean 9.8%. Where the bitewing was greater than periapical, it ranged up to 51.9% greater, with a mean 18.2%. 4. The percentage difference was greater in maxillary posterior areas than in mandibular molar, premolar areas. A lower prevalence of significant differences was attributed to relatively more simple root and favorable radiographic conditions in mandibular molar and premolar areas.5. The anatomical limitations imposed on periapical radiographic technique, most often result in somewhat foreshortened radiographic images. This situation would tend to be accentated by the anatomical restrictions of the hard palate. 6. Consequently, since the significant differences frequently exist between measurements obtained from bitewing and periapical techniques, it is important to define which technique is used.

  11. Simultaneous Sinus Lifting and Alveolar Distraction of a Severely Atrophic Posterior Maxilla for Oral Rehabilitation with Dental Implants

    Science.gov (United States)

    Kanno, Takahiro; Mitsugi, Masaharu; Paeng, Jun-Young; Sukegawa, Shintaro; Furuki, Yoshihiko; Ohwada, Hiroyuki; Nariai, Yoshiki; Ishibashi, Hiroaki; Katsuyama, Hideaki; Sekine, Joji

    2012-01-01

    We retrospectively reviewed a new preimplantation regenerative augmentation technique for a severely atrophic posterior maxilla using sinus lifting with simultaneous alveolar distraction, together with long-term oral rehabilitation with implants. We also analyzed the regenerated bone histomorphologically. This study included 25 maxillary sinus sites in 17 patients. The technique consisted of alveolar osteotomy combined with simultaneous sinus lifting. After sufficient sinus lifting, a track-type vertical alveolar distractor was placed. Following a latent period, patient self-distraction was started. After the required augmentation was achieved, the distractor was left in place to allow consolidation. The distractor was then removed, and osseointegrated implants (average of 3.2 implants per sinus site, 80 implants) were placed. Bone for histomorphometric analysis was sampled from six patients and compared with samples collected after sinus lifting alone as controls (n = 4). A sufficient alveolus was regenerated, and all patients achieved stable oral rehabilitation. The implant survival rate was 96.3% (77/80) after an average postloading followup of 47.5 months. Good bone regeneration was observed in a morphological study, with no significant difference in the rate of bone formation compared with control samples. This new regenerative technique could be a useful option for a severely atrophic maxilla requiring implant rehabilitation. PMID:22792105

  12. Simultaneous Sinus Lifting and Alveolar Distraction of a Severely Atrophic Posterior Maxilla for Oral Rehabilitation with Dental Implants

    Directory of Open Access Journals (Sweden)

    Takahiro Kanno

    2012-01-01

    Full Text Available We retrospectively reviewed a new preimplantation regenerative augmentation technique for a severely atrophic posterior maxilla using sinus lifting with simultaneous alveolar distraction, together with long-term oral rehabilitation with implants. We also analyzed the regenerated bone histomorphologically. This study included 25 maxillary sinus sites in 17 patients. The technique consisted of alveolar osteotomy combined with simultaneous sinus lifting. After sufficient sinus lifting, a track-type vertical alveolar distractor was placed. Following a latent period, patient self-distraction was started. After the required augmentation was achieved, the distractor was left in place to allow consolidation. The distractor was then removed, and osseointegrated implants (average of 3.2 implants per sinus site, 80 implants were placed. Bone for histomorphometric analysis was sampled from six patients and compared with samples collected after sinus lifting alone as controls (n=4. A sufficient alveolus was regenerated, and all patients achieved stable oral rehabilitation. The implant survival rate was 96.3% (77/80 after an average postloading followup of 47.5 months. Good bone regeneration was observed in a morphological study, with no significant difference in the rate of bone formation compared with control samples. This new regenerative technique could be a useful option for a severely atrophic maxilla requiring implant rehabilitation.

  13. A histologic, histomorphometric, and radiographic comparison between two complexes of CenoBoen/CenoMembrane and Bio-Oss/Bio-Gide in lateral ridge augmentation: A clinical trial.

    Science.gov (United States)

    Amoian, Babak; Moudi, Ehsan; Majidi, Maryam Seyed; Ali Tabatabaei, S M

    2016-09-01

    Several grafting materials have been used for alveolar ridge augmentation. The literature lacks researches to compare CenoBone to other grafting materials. The aim of this study was to compare CenoBone/CenoMembrane complex to Bio-Oss/Bio-Gide complex in lateral alveolar bone augmentation in terms of radiographic, histologic, and histomorphometric parameters. In this randomized controlled trial, ten patients who needed lateral ridge augmentation were selected and augmentations were done using either of CenoBone/CenoMembrane or Bio-Oss/Bio-Gide complexes. In the re-entry surgery in 6 months following augmentation, core biopsies were taken and clinical, radiographic, histologic, and histomorphometric evaluations were performed. No statistically significant difference was seen between groups except for the number of blood vessels and percentage of residual graft materials. CenoBone seems to present a comparable lateral ridge augmentation to Bio-Oss in.

  14. Dimensional Ridge Preservation with a Novel Highly Porous TiO 2 Scaffold: An Experimental Study in Minipigs

    Directory of Open Access Journals (Sweden)

    Hanna Tiainen

    2012-01-01

    Full Text Available Despite being considered noncritical size defects, extraction sockets often require the use of bone grafts or bone graft substitutes in order to facilitate a stable implant site with an aesthetically pleasing mucosal architecture and prosthetic reconstruction. In the present study, the effect of novel TiO2 scaffolds on dimensional ridge preservation was evaluated following their placement into surgically modified extraction sockets in the premolar region of minipig mandibles. After six weeks of healing, the scaffolds were wellintegrated in the alveolar bone, and the convex shape of the alveolar crest was preserved. The scaffolds were found to partially preserve the dimensions of the native buccal and lingual bone walls adjacent to the defect site. A tendency towards more pronounced vertical ridge resorption, particularly in the buccal bone wall of the nongrafted alveoli, indicates that the TiO2 scaffold may be used for suppressing the loss of bone that normally follows tooth extraction.

  15. Computed tomographic features of apical infection of equine maxillary cheek teeth: a retrospective study of 49 horses.

    Science.gov (United States)

    Bühler, M; Fürst, A; Lewis, F I; Kummer, M; Ohlerth, S

    2014-07-01

    Computed tomographic (CT) studies evaluating the relevance of individual CT features of apical infection in maxillary cheek teeth are lacking. To study the prevalence and relationship of single CT features in horses with and without clinical evidence of apical infection in maxillary cheek teeth. Retrospective case-control study. Multislice CT scans of the head of 49 horses were evaluated retrospectively. Changes of the infundibulum, pulp, root, lamina dura, periodontal space and alveolar bone in maxillary cheek teeth were recorded. Single CT changes were much more prevalent in the 28 horses with clinical signs. However, infundibular changes and a nondetectable lamina dura were also common in the 21 horses without clinical evidence of apical infection. Computed tomographic abnormalities of the pulp, root, periapical bone and periodontal space and the presence of a tooth fracture were significantly related. Infundibular changes were not associated with other CT signs of apical infection. Although nondetectable lamina dura was the most frequent CT change in all teeth in both studied groups, it was most commonly a solitary feature in otherwise normal teeth. Apical infections, defined as ≥3 CT changes, occurred mainly in the 108/208, 109/209 and 110/210 (Triadan numbers) and were found only in horses with clinical evidence of apical infection, except in one horse without clinical signs that had one affected root. Combined CT changes of the pulp, root, lamina dura, periapical bone and periodontal space and the presence of a tooth fracture appear to be reliable features to diagnose apical infection in maxillary cheek teeth. As a solitary feature, a nondetectable lamina dura should be interpreted cautiously and may even be considered normal due to its minor thickness and/or too low resolution of the imaging modality. © 2013 EVJ Ltd.

  16. Comparison of rate of maxillary canine movement with or without modified corticotomy facilitated orthodontic treatment: A prospective clinical trial

    Directory of Open Access Journals (Sweden)

    Harshal N Suryavanshi

    2015-01-01

    Full Text Available Background and Objectives: The average orthodontic treatment time for extraction therapy is 31 months. One of the main disadvantages of orthodontic treatment is time. Alveolar corticotomies have been used in conjunction with orthodontics to reduce the treatment time by increasing the rate of tooth movement. Concerns about the possible risks of corticotomy procedure have led to the modification of this technique. Germeη et al. reported a case treated by their modified corticotomy technique and noted reduced treatment time without any adverse effects on the periodontium and the vitality of teeth with their new conservative corticotomy technique. This study was undertaken to clinically evaluate the efficacy of the aforesaid technique. Materials and Methods: A split-mouth study design was carried out to compare the rate of maxillary canine movement with and without modified corticotomy facilitated orthodontic treatment in 10 patients requiring maxillary first premolar extractions. The modified corticotomy procedure was performed on the maxillary arch unilaterally. The upper arch was immediately activated bilaterally after surgical procedure using equal orthodontic forces for retraction of the maxillary canines. The amount of tooth movement was recorded at an interval of every month till the completion of canine retraction. The rate of canine movement on experimental and control site was compared. The patients were followed for 6 months to check the occurrence of undesired effects such as root resorption, periodontal damage and loss of vitality of teeth on the experimental side. Results: Higher mean velocity was observed in canines with modified corticotomy facilitated retraction compared to conventionally retracted canines; with the difference in mean velocity between the two groups was found to be clinically significant as well as statistically significant (P < 0.001. Interpretation and Conclusion: The results suggested that modified corticotomy

  17. Iatrogenic injury to the inferior alveolar nerve

    DEFF Research Database (Denmark)

    Hillerup, Søren

    2008-01-01

    The purpose of this prospective, non-randomised, descriptive study is to characterise the neurosensory deficit and associated neurogenic discomfort in 52 patients with iatrogenic injury to the inferior alveolar nerve (IAN). All patients were examined and followed up according to a protocol...

  18. Alveolar Thin Layer Flows and Surfactant Dynamics

    Science.gov (United States)

    Roumie, Ahmad; Jbaily, Abdulrahman; Szeri, Andrew J.

    2017-11-01

    Pulmonary surfactants play a vital role in everyday respiration. They regulate surface tension in the lungs by diffusing through the hypophase, a liquid layer that lines the interior surface of the alveoli, and adsorbing to the existing air-fluid interface. This decreases the equilibrium surface tension value by as much as a factor of 3, minimizing breathing effort and preventing lung collapse at the end of exhalation. Given that the hypophase thickness h lies within the range 0.1 μm < h <0.5 μm , and that the average alveolar radius R is 100 μm , for some purposes the hypophase may usefully be modeled as a fluid layer on a flat sheet representing the alveolar wall. Moreover, because of the large aspect ratio, the lubrication approximation can be applied. The aim of the present work is to study the interaction between the straining of the alveolar wall and the fluid flow in the hypophase. The analysis is governed by the relative magnitudes of the time scales of surfactant diffusion, adsorption, desorption, viscous dissipation and sheet straining. Cases of particular interest include non-uniform surfactant concentration at the interface, leading to Marangoni flows and a non-uniform hypophase thickness profile. The analytical formulation and numerical simulations are presented. This work is motivated by a need to understand alveolar deformation during breathing, and to do so in a way that derives from improved understanding of the fluid mechanics of the problem.

  19. Alveolar proteinosis associated with aluminium dust inhalation.

    Science.gov (United States)

    Chew, R; Nigam, S; Sivakumaran, P

    2016-08-01

    Secondary alveolar proteinosis is a rare lung disease which may be triggered by a variety of inhaled particles. The diagnosis is made by detection of anti-granulocyte-macrophage colony-stimulating factor antibodies in bronchoalveolar lavage fluid, which appears milky white and contains lamellar bodies. Aluminium has been suggested as a possible cause, but there is little evidence in the literature to support this assertion. We report the case of a 46-year-old former boilermaker and boat builder who developed secondary alveolar proteinosis following sustained heavy aluminium exposure. The presence of aluminium was confirmed both by histological examination and metallurgical analysis of a mediastinal lymph node. Despite cessation of exposure to aluminium and treatment with whole-lung lavage which normally results in improvements in both symptoms and lung function, the outcome was poor and novel therapies are now being used for this patient. It may be that the natural history in aluminium-related alveolar proteinosis is different, with the metal playing a mediating role in the disease process. Our case further supports the link between aluminium and secondary alveolar proteinosis and highlights the need for measures to prevent excessive aluminium inhalation in relevant industries. © The Author 2016. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  20. Comparison of two protocols for maxillary protraction: bone anchors versus face mask with rapid maxillary expansion

    Science.gov (United States)

    Cevidanes, Lucia; Baccetti, Tiziano; Franchi, Lorenzo; McNamara, James A.; De Clerck, Hugo

    2010-01-01

    Objective To test the hypothesis that there is no difference in the active treatment effects for maxillary advancement induced by bone-anchored maxillary protraction (BAMP) and the active treatment effects for face mask in association with rapid maxillary expansion (RME/FM). Materials and Methods This is a study on consecutively treated patients. The changes in dentoskeletal cephalometric variables from start of treatment (T1) to end of active treatment (T2) with an average T1–T2 interval of about 1 year were contrasted in a BAMP sample of 21 subjects with a RME/FM sample of 34 patients. All subjects were prepubertal at T1. Statistical comparison was performed with t-tests for independent samples. Results The BAMP protocol produced significantly larger maxillary advancement than the RME/FM therapy (with a difference of 2 mm to 3 mm). Mandibular sagittal changes were similar, while vertical changes were better controlled with BAMP. The sagittal intermaxillary relationships improved 2.5 mm more in the BAMP patients. Additional favorable outcomes of BAMP treatment were the lack of clockwise rotation of the mandible as well as a lack of retroclination of the lower incisors. Conclusions The hypothesis is rejected. The BAMP protocol produced significantly larger maxillary advancement than the RME/FM therapy. PMID:20578848

  1. Basaloid Squamous Cell Carcinoma Involving the Alveolar Ridge, Buccal & Lingual Vestibule - A Case Report

    Directory of Open Access Journals (Sweden)

    Supriya Koshti

    2013-01-01

    Full Text Available Background: Basaloid squamous cell carcinoma of oral mucosa is a rare and aggressive variant of squamous cell carcinoma. They can be differentiated from squamous cell carcinomas by their distinct clinical and histopathological features. Methods: 45 year old female patient presented with extra oral exophytic mass and intra-oral ulcerative lesion on right buccal mucosa and vestibule. The patient was referred for routine blood examination and radiography followed by incisional biopsy. The biopsy specimen was fixed, processed and stained with Hematoxylin and Eosin for further microscopic examination. Results: On microscopic examination basaloid cells were seen proliferating along with dysplastic squamous cells in the connective tissue stroma. Conclusion: Based on the histopathological findings a diagnosis of ′Basaloid squamous cell carcinoma′ was made. The patient was referred to department of Oral and Maxillofacial Surgery for excision of the lesion followed by radiotherapy.

  2. Vertical Root Fracture: Preservation of the Alveolar Ridge Using Immediate Implants

    Directory of Open Access Journals (Sweden)

    Edmar de Oliveira Oya

    2014-01-01

    Full Text Available Teeth with vertical root fracture (VRF have complete or incomplete fractures that begin in the root and extend toward the occlusal surface. The most frequent causes of VRF originate from physical trauma, occlusal prematurity, inadequate endodontic treatment, and iatrogenic causes. Diagnose is difficult and delay can cause stomatognathic system problem. The purpose of this case report was to evaluate immediate implant placement after extraction of teeth with vertical root fracture. For the 1st case, the VRF in 1st left lower molar was confirmed during surgical flap and at the same time, the tooth was removed and immediate implant was placed. For the 2nd case, the VRF 1st left lower molar was confirmed during endodontic access and at the same appointment, the tooth was removed and the immediate implant is placed. Several studies have shown that immediate implants have similar success rates when compared with late implants. Consider that this approach is a safe procedure with favorable prognosis. In cases of VRF, the main factor to be considered is the presence of adequate bone support and immediate implants can preserve the vertical bone height, adding the fact that good patient compliance reduces the number of surgical interventions and promotes the functionality of stomatognathic system.

  3. Nonsurgical, nonextraction management of impacted maxillary canine

    Directory of Open Access Journals (Sweden)

    Jasneet Singh

    2018-01-01

    Full Text Available NS, a 12 year 2 months old female patient, presented with the chief complaint of irregular teeth. Diagnosis revealed skeletal Class II jaw base relation, with average (toward vertical growth pattern, dentoalveolar angles Class I molar relationship with severe crowding in upper and moderate crowding in the lower arch, normally positioned maxillary incisors but proclined lower incisors, “V” shape constricted maxillary arch with first premolar in crossbite, overretained deciduous molar and a high placed buccoversion canine in the first quadrant and an impacted canine in the second quadrant, constricted mandibular arch with first premolar blocked out in the third quadrant. Treatment with a nonsurgical, nonextraction treatment plan by expansion of the upper arch and taking advantage of natural eruptive forces of the tooth was planned. The final outcome solved the patient's complaints and achieved an esthetically pleasing and functionally adequate occlusal result.

  4. Ocean Ridges and Oxygen

    Science.gov (United States)

    Langmuir, C. H.

    2014-12-01

    The history of oxygen and the fluxes and feedbacks that lead to its evolution through time remain poorly constrained. It is not clear whether oxygen has had discrete steady state levels at different times in Earth's history, or whether oxygen evolution is more progressive, with trigger points that lead to discrete changes in markers such as mass independent sulfur isotopes. Whatever this history may have been, ocean ridges play an important and poorly recognized part in the overall mass balance of oxidants and reductants that contribute to electron mass balance and the oxygen budget. One example is the current steady state O2 in the atmosphere. The carbon isotope data suggest that the fraction of carbon has increased in the Phanerozoic, and CO2 outgassing followed by organic matter burial should continually supply more O2 to the surface reservoirs. Why is O2 not then increasing? A traditional answer to this question would relate to variations in the fraction of burial of organic matter, but this fraction appears to have been relatively high throughout the Phanerozoic. Furthermore, subduction of carbon in the 1/5 organic/carbonate proportions would contribute further to an increasingly oxidized surface. What is needed is a flux of oxidized material out of the system. One solution would be a modern oxidized flux to the mantle. The current outgassing flux of CO2 is ~3.4*1012 moles per year. If 20% of that becomes stored organic carbon, that is a flux of .68*1012 moles per year of reduced carbon. The current flux of oxidized iron in subducting ocean crust is ~2*1012 moles per year of O2 equivalents, based on the Fe3+/Fe2+ ratios in old ocean crust compared to fresh basalts at the ridge axis. This flux more than accounts for the incremental oxidizing power produced by modern life. It also suggests a possible feedback through oxygenation of the ocean. A reduced deep ocean would inhibit oxidation of ocean crust, in which case there would be no subduction flux of oxidized

  5. The Effect of Alendronate on Various Graft Materials Used in Maxillary Sinus Augmentation: A Rabbit Study.

    Science.gov (United States)

    Ayranci, Ferhat; Gungormus, Metin; Omezli, Mehmet Melih; Gundogdu, Betul

    2015-12-01

    Increasing sinus pneumatization and the accompanying alveolar bone resorption complicate dental implant placement. This problem can be overcome today by raising the maxillary sinus floor with graft materials. Bisphosphonates are commonly used to accelerate the recovery of the graft materials and to prevent resorption. The purpose of this study is to investigate whether systemic administration of a bisphosphonate (alendronate) would improve new bone formation and reduce fibrous tissue formation over a 6-week follow-up in rabbits treated with two different grafting materials for maxillary sinus floor augmentation. This experimental animal study was conducted at the Experimental Medical Application and Research Center at Erzurum/ Turkey. Twelve New Zealand rabbits, each weighing between 2.7 and 3.3 kg, were used. Twenty-four maxillary sinus floor elevation operations were performed, two on each animal (n = 24). Each elevation was repaired with either deproteinized bovine bone (xenograft) or autogenous bone graft obtained from the iliac crest. Both groups were divided into 2 subgroups: saline-treated and alendronate-treated. All groups underwent the same surgical procedures and evaluation, and were sacrificed at the 6th postoperative week. Sinuses augmented with deproteinized bovine bone (xenograft) and autogenous bone graft were examined histopathologically and histomorphometrically. At 6 weeks, the bone area was significantly larger in the Xenograft-Alendronate group (33.0% ± 5.0%) than in the Xenograft-Saline group (20.8% ± 4.9%) and the bone area was significantly larger in the Autogenous-Alendronate group (43.3% ± 3.8%) than in the Autogenous-Saline group (37.5% ± 6.6%) (P = 0.001). The histomorphometric and histopathological results consistently showed that alendronate stimulated bone formation and reduced fibrous tissue formation in maxillary sinus augmentation grafts, especially in the deproteinized bovine bone group (xenograft). Alendronate may be

  6. Maxillary reconstruction: Current concepts and controversies

    Directory of Open Access Journals (Sweden)

    Subramania Iyer

    2014-01-01

    Full Text Available Maxillary reconstruction is still an evolving art when compared to the reconstruction of the mandible. The defects of maxilla apart from affecting the functions of the speech, swallowing and mastication also cause cosmetic disfigurement. Rehabilitation of the form and function in patients with maxillary defects is either by using an obturator prosthesis or by a surgical reconstruction. Literature is abundant with a variety of reconstructive methods. The classification systems are also varied, with no universal acceptance of any one of them. The oncologic safety of these procedures is still debated, and conclusive evidence in this regard has not emerged yet. Management of the orbit is also not yet addressed properly. Tissue engineering, that has been hyped to be one of the possible solutions for this vexing reconstructive problem, has not come out with reliable and reproducible results so far. This review article discusses the rationale and oncological safety of the reconstructing the maxillary defects, critically analyzes the classification systems, offers the different reconstructive methods and touches upon the controversies in this subject. The management of the retained and exenterated orbit associated with maxillectomy is reviewed. The surgical morbidity, complications and the recent advances in this field are also looked into. An algorithm, based on our experience, is presented.

  7. Maxillary reconstruction: Current concepts and controversies

    Science.gov (United States)

    Iyer, Subramania; Thankappan, Krishnakumar

    2014-01-01

    Maxillary reconstruction is still an evolving art when compared to the reconstruction of the mandible. The defects of maxilla apart from affecting the functions of the speech, swallowing and mastication also cause cosmetic disfigurement. Rehabilitation of the form and function in patients with maxillary defects is either by using an obturator prosthesis or by a surgical reconstruction. Literature is abundant with a variety of reconstructive methods. The classification systems are also varied, with no universal acceptance of any one of them. The oncologic safety of these procedures is still debated, and conclusive evidence in this regard has not emerged yet. Management of the orbit is also not yet addressed properly. Tissue engineering, that has been hyped to be one of the possible solutions for this vexing reconstructive problem, has not come out with reliable and reproducible results so far. This review article discusses the rationale and oncological safety of the reconstructing the maxillary defects, critically analyzes the classification systems, offers the different reconstructive methods and touches upon the controversies in this subject. The management of the retained and exenterated orbit associated with maxillectomy is reviewed. The surgical morbidity, complications and the recent advances in this field are also looked into. An algorithm, based on our experience, is presented. PMID:24987199

  8. Increasing the amount of corticotomy does not affect orthodontic tooth movement or root resorption, but accelerates alveolar bone resorption in rats.

    Science.gov (United States)

    Kurohama, Takeshi; Hotokezaka, Hitoshi; Hashimoto, Megumi; Tajima, Takako; Arita, Kotaro; Kondo, Takanobu; Ino, Airi; Yoshida, Noriaki

    2017-06-01

    The purpose of this study was to evaluate the relationships among the volume of bone cut during corticotomy, amount of tooth movement, volume of root resorption, and volume of the resultant alveolar bone resorption after tooth movement. Ten-week-old female Wistar rats were distributed into the corticotomy groups and a control group that underwent sham corticotomy. Two experiments employing two different orthodontic forces (10 or 25g) and experimental periods (14 or 21 days) were performed. The volumes of the bone cut by corticotomy were 0.1, 1.0, and 1.7mm3 in the 25g groups, and 1.0 and 1.7mm3 in the 10g groups. Nickel-titanium closed-coil springs were set on the maxillary left first molars to induce mesial movement. After orthodontic tooth movement, the amount of tooth movement, volume of root resorption, and volume of alveolar bone resorption were measured. Despite differences in the volume of bone cut among the different corticotomy groups, there were not significant differences in the amount of tooth movement and volume of root resorption between the control group and any of the corticotomy groups. However, higher volume of bone cut during corticotomy was significantly related to the decreased alveolar bone volume-in particular, to the reduced height of the alveolar bone crest after tooth movement. The volume of the alveolar bone cut during corticotomy does not affect tooth movement or root resorption in 10-week-old female Wistar rats; however, it may increase alveolar bone loss after tooth movement. © The Author 2016. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com

  9. [Alveolar bone thickness and root length changes in the treatment of skeletal Class III patients facilitated by improved corticotomy: a cone-beam CT analysis].

    Science.gov (United States)

    Wu, Jiaqi; Jiang, Jiuhui; Xu, Li; Liang, Cheng; Li, Cuiying; Xu, Xiao

    2015-04-01

    To evaluate the alveolar bone thickness and root length changes of anterior teeth with cone-beam computed tomography (CBCT). CBCT scans were taken for 12 skeletal Class III patients who accepted the improved corticotomy (IC) procedures during pre-surgical orthodontics. The CBCT data in T1 (the maxillary dental arch was aligned and leveled) and T2 (extraction space closure) were superimposed and the alveolar bone thickness at root apex level and root length measurements were done. From T1 to T2, the buccal alveolar bone thickness for the upper lateral incisors increased from (1.89±0.83) to (2.47±1.02) mm (P<0.05), and for central incisors and for canines from (2.32±0.71) to (2.68±1.48) mm and from (2.28±1.08) to (2.41±1.40) mm, respectively. According to Sharpe Grading System, the root resorption grade for 69 teeth of 72 was located in Grade 1, two teeth in Grade 2, one tooth in Grade 3. The improved corticotomy had the potential to increase the buccal alveolar bone thickness and the root resorption in most teeth was in Grade 1 according to Sharpe grading system.

  10. Le Fort I Maxillary Advancement Using Distraction Osteogenesis

    OpenAIRE

    Combs, Patrick D.; Harshbarger, Raymond J.

    2014-01-01

    Treatment of maxillary hypoplasia has traditionally involved conventional Le Fort I osteotomies and advancement. Advancements of greater than 10 mm risk significant relapse. This risk is greater in the cleft lip and palate population, whose anatomy and soft tissue scarring from prior procedures contributes to instability of conventional maxillary advancement. Le Fort I advancement with distraction osteogenesis has emerged as viable, stable treatment modality correction of severe maxillary hyp...

  11. Volumetric measurement of the maxillary sinus by coronal CT scan

    International Nuclear Information System (INIS)

    Ikeda, Atsuko

    1996-01-01

    The volume of the maxillary sinus was estimated by coronal CT scan. The purpose of this study was to compare the estimated volume of the normal maxillary sinus with that of the inflamed maxillary sinus. Patients were classified following evaluation by CT scan of the paranasal sinuses into 3 categories. Group A (n=12): Patients suffered from headache, facial pain and epistaxis, but CT scans of their nasal cavity and paranasal sinus were within normal limits without inflammatory change. Group B (n=69): Patients with bilateral chronic maxillary sinusitis, CT scans of whom showed inflammatory changes in both maxillary sinuses. All of the patients in this group underwent sinus surgery after coronal CT scans. Group C (n=14): Patients with unilateral chronic maxillary sinusitis, CT scans of whom showed inflammatory change in unilateral maxillary sinuses. CT scans of these patients were measured by Plannimeter to take the area of each image of the maxillary sinus. Consecutively imaged areas were summated by integral calculus to obtain an estimate of the sinus volume. The mean maxillary sinus volume in the affected sinuses was significantly smaller than those in the contralateral normal sinuses (p<0.05, Wilcoxon-test). The various volumes of the maxillary sinuses and the developmental cause were discussed. Comparison of groups A with B suggested three distinct patterns; the maxillary sinus volume has decreased due to inflammatory changes in the bone. The small sinuses have a tendency to develop chronic inflammatory change. The aeration in the maxillary sinus may be decreased when anatomic variations that may obstruct the ethmoid infundibulum exist. (K.H.)

  12. Ecological and phylogenetic influences on maxillary dentition in snakes

    Directory of Open Access Journals (Sweden)

    Kate Jackson

    2010-12-01

    Full Text Available The maxillary dentition of snakes was used as a system with which to investigate the relative importance of the interacting forces of ecological selective pressures and phylogenetic constraints indetermining morphology. The maxillary morphology of three groups of snakes having different diets, with each group comprising two distinct lineages — boids and colubroids — was examined. Our results suggest that dietary selective pressures may be more significantthan phylogenetic history in shaping maxillary morphology.

  13. Volumetric measurement of the maxillary sinus by coronal CT scan

    Energy Technology Data Exchange (ETDEWEB)

    Ikeda, Atsuko [Tokyo Medical and Dental Univ. (Japan). School of Medicine

    1996-08-01

    The volume of the maxillary sinus was estimated by coronal CT scan. The purpose of this study was to compare the estimated volume of the normal maxillary sinus with that of the inflamed maxillary sinus. Patients were classified following evaluation by CT scan of the paranasal sinuses into 3 categories. Group A (n=12): Patients suffered from headache, facial pain and epistaxis, but CT scans of their nasal cavity and paranasal sinus were within normal limits without inflammatory change. Group B (n=69): Patients with bilateral chronic maxillary sinusitis, CT scans of whom showed inflammatory changes in both maxillary sinuses. All of the patients in this group underwent sinus surgery after coronal CT scans. Group C (n=14): Patients with unilateral chronic maxillary sinusitis, CT scans of whom showed inflammatory change in unilateral maxillary sinuses. CT scans of these patients were measured by Plannimeter to take the area of each image of the maxillary sinus. Consecutively imaged areas were summated by integral calculus to obtain an estimate of the sinus volume. The mean maxillary sinus volume in the affected sinuses was significantly smaller than those in the contralateral normal sinuses (p<0.05, Wilcoxon-test). The various volumes of the maxillary sinuses and the developmental cause were discussed. Comparison of groups A with B suggested three distinct patterns; the maxillary sinus volume has decreased due to inflammatory changes in the bone. The small sinuses have a tendency to develop chronic inflammatory change. The aeration in the maxillary sinus may be decreased when anatomic variations that may obstruct the ethmoid infundibulum exist. (K.H.)

  14. Orthodontic treatment of impacted maxillary canines: an appraisal of prognostic factors.

    Science.gov (United States)

    Baccetti, Tiziano; Crescini, Aldo; Nieri, Michele; Rotundo, Roberto; Pini Prato, Giovan Paolo

    2007-01-01

    The aim of the study was to evaluate the influence of pre-treatment radiographic features (alpha-angle, d-distance and s-sector) on the duration of active orthodontic traction of impacted maxillary canines treated by a combined surgical (flap approach) and orthodontic (direct traction to the center of the ridge) treatment. A study population of 168 patients (168 canines) was evaluated. Multiple regression analysis was used. Pre-treatment radiographic variables were associated significantly with the duration of orthodontic traction. Age, gender and site of impaction did not affect the duration of traction significantly. Alpha-angle, d-distance and s-sector are valid indicators for the duration of orthodontic traction.

  15. Feasibility of Shape-Memory Ni/Ti Alloy Wire Containing Tube Elevators for Transcrestal Detaching Maxillary Sinus Mucosa: Ex Vivo Study

    Directory of Open Access Journals (Sweden)

    Yanfeng Li

    2016-12-01

    Full Text Available Background: Osteotome sinus floor elevation is a less invasive approach to augment an insufficient alveolar bone at the posterior maxilla for dental implantation. However, this approach has some limitations due to the lack of sinus lift tools available for clinical use and the small transcrestal access to the maxillary sinus floor. We recently invented shape-memory Ni/Ti alloy wire containing tube elevators for transcrestal detaching maxillary sinus mucosa, and developed goat ex vivo models for direct visualizing the effectiveness of detaching sinus mucosa in real time during transcrestal maxillary sinus floor elevation. Methods: We evaluated our invented elevators, namely elevator 012 and elevator 014, for their effectiveness for transcrestal detaching maxillary sinus mucosa using the goat ex vivo models. We measured the length of sinus mucosa detached in mesial and distal directions or buccal and palatal directions, and the space volume created by detaching maxillary sinus mucosa in mesial, distal, buccal and palatal directions using the invented elevators. Results: Elevator 012 had a shape-memory Ni/Ti alloy wire with a diameter of 0.012 inch, while elevator 014 had its shape-memory Ni/Ti alloy wire with a diameter of 0.014 inch. Elevator 012 could detach the goat maxillary sinus mucosa in the mesial or distal direction for 12.1±4.3 mm, while in the buccal or palatal direction for 12.5±6.7 mm. The elevator 014 could detach the goat maxillary sinus mucosa for 23.0±4.9 mm in the mesial or distal direction, and for 19.0±8.1 mm in the buccal or palatal direction. An average space volume of 1.7936±0.2079 ml was created after detaching the goat maxillay sinus mucosa in both mesial/distal direction and buccal/palatal direction using elevator 012; while the average space volume created using elevator 014 was 1.8764±0.2366 ml. Conclusion: Both two newly invented tube elevators could effectively detach the maxillary sinus mucosa on the goat ex

  16. Feasibility of Shape-Memory Ni/Ti Alloy Wire Containing Tube Elevators for Transcrestal Detaching Maxillary Sinus Mucosa: Ex Vivo Study.

    Science.gov (United States)

    Li, Yanfeng; Wang, Fuli; Hu, Pin; Fan, Jiadong; Han, Yishi; Liu, Bin; Liu, Tao; Yang, Chunhao; Gu, Xiangmin

    2016-01-01

    Osteotome sinus floor elevation is a less invasive approach to augment an insufficient alveolar bone at the posterior maxilla for dental implantation. However, this approach has some limitations due to the lack of sinus lift tools available for clinical use and the small transcrestal access to the maxillary sinus floor. We recently invented shape-memory Ni/Ti alloy wire containing tube elevators for transcrestal detaching maxillary sinus mucosa, and developed goat ex vivo models for direct visualizing the effectiveness of detaching sinus mucosa in real time during transcrestal maxillary sinus floor elevation. We evaluated our invented elevators, namely elevator 012 and elevator 014, for their effectiveness for transcrestal detaching maxillary sinus mucosa using the goat ex vivo models. We measured the length of sinus mucosa detached in mesial and distal directions or buccal and palatal directions, and the space volume created by detaching maxillary sinus mucosa in mesial, distal, buccal and palatal directions using the invented elevators. Elevator 012 had a shape-memory Ni/Ti alloy wire with a diameter of 0.012 inch, while elevator 014 had its shape-memory Ni/Ti alloy wire with a diameter of 0.014 inch. Elevator 012 could detach the goat maxillary sinus mucosa in the mesial or distal direction for 12.1±4.3 mm, while in the buccal or palatal direction for 12.5±6.7 mm. The elevator 014 could detach the goat maxillary sinus mucosa for 23.0±4.9 mm in the mesial or distal direction, and for 19.0±8.1 mm in the buccal or palatal direction. An average space volume of 1.7936±0.2079 ml was created after detaching the goat maxillay sinus mucosa in both mesial/distal direction and buccal/palatal direction using elevator 012; while the average space volume created using elevator 014 was 1.8764±0.2366 ml. Both two newly invented tube elevators could effectively detach the maxillary sinus mucosa on the goat ex vivo sinus models. Moreover, elevator 014 has advantages over

  17. Influence of balanced occlusion in complete dentures on the decrease in reduction of an edentulous ridge

    Directory of Open Access Journals (Sweden)

    Poštić Srđan D.

    2012-01-01

    Full Text Available Background/Aim. Balanced occlusal arrangement of artificial teeth and balanced occlusion is a specific type of occlusion that preserves the stability of complete dentures. Balanced occlusion comprises realization of tooth contacts at the working side as well as at the balancing side, at the same time. The aim of this study was to assess the influence of balanced occlusal arrangement of artificial teeth on the decrease in reduction of edentulous alveolar ridge. Methods. A longitudinal study on 91 fully edentulous patients was conducted using their panoramic radiographs and parameters of vertical dimension of edentulous ridges. All the patients were clinically examined by the same and a qualified dental practitioner. Numerical values of parameters of vertical dimensions of edentulous ridges and lines were statistically processed and compared using the Student’s t-test. Results. Vertical dimensions and heights of edentulous ridges were different after comparison of parameters in complete denture wearers with balanced occlusion and complete denture wearers without bilaterally balanced occlusion, as well as between male and female edentulous patients. Statistically significant differences of heights were established in complete denture wearers’ with a set of artificial teeth without balanced occlusion, at the baseline and 12 months after wearing of complete dentures. Conclusion. Balanced occlusion is a favored occlusal design in setting of artificial teeth in conventional complete dentures, which preserves edentulous ridge and influence the stability of dentures.

  18. Maxillary Anterior Segmental Distraction Osteogenesis to Correct Maxillary Deficiencies in a Patient With Cleft Lip and Palate.

    Science.gov (United States)

    Kageyama-Iwata, Asuka; Haraguchi, Seiji; Iida, Seiji; Aikawa, Tomonao; Yamashiro, Takashi

    2017-07-01

    This report describes a case of successful orthodontic treatment using maxillary anterior segmental distraction osteogenesis with an internal maxillary distractor and bilateral sagittal split ramus osteotomy in a girl with cleft lip and palate. A 16-year-old girl with unilateral cleft lip and palate exhibited midface retrusion because of growth inhibition of the maxillary complex and mandibular excess. After the presurgical orthodontic treatment, 6.0-mm advancement of the maxillary anterior segment and 4.0-mm set back of the mandible were performed. After a retention period, the patient's midface convexity was greatly improved and the velopharyngeal competence was preserved without relapse.

  19. Keratocystic odontogenic tumor with impacted maxillary third molar involving the right maxillary antrum:An unusual case report

    Directory of Open Access Journals (Sweden)

    Abhishek Gupta

    2011-01-01

    Full Text Available The odontogenic keratocyst (OKC, first described by Phillipsen in 1956, has metamorphosized as a keratocystic odontogenic tumor (KCOT as reported in WHO classification of head and neck tumors in 2005. KCOT is a benign intraosseous neoplasm of the jaw and its occurrence in maxilla is unusual and its appearance in maxillary antrum along with maxillary impacted third molar is very uncommon. This article reports a case of KCOT associated with impacted maxillary third molar in right maxillary antrum and describes its rare site of occurrence.

  20. Platelet Rich Fibrin (P.R.F.) in Reconstructive Surgery of Atrophied Maxillary Bones: Clinical and Histological Evaluations

    Science.gov (United States)

    Tatullo, Marco; Marrelli, Massimo; Cassetta, Michele; Pacifici, Andrea; Stefanelli, Luigi Vito; Scacco, Salvatore; Dipalma, Gianna; Pacifici, Luciano; Inchingolo, Francesco

    2012-01-01

    Introduction. Maxillary bone losses often require additional regenerative procedures: as a supplement to the procedures of tissue regeneration, a platelet concentrate called PRF (Platelet Rich Fibrin) was tested for the first time in France by Dr. Choukroun. Aim of the present study is to investigate, clinically and histologically, the potential use of PRF, associated with deproteinized bovine bone (Bio-Oss), as grafting materials in pre-implantology sinus grafting of severe maxillary atrophy, in comparison with a control group, in which only deproteinized bovine bone (Bio-Oss) was used as reconstructive material. Materials and Methods. 60 patients were recruited using the cluster-sampling method; inclusion criteria were maxillary atrophy with residual ridge piezosurgery in order to reduce trauma and to optimize the design of the operculum on the cortical bone. The reopening of the surgical area was scheduled at 3 different times. Results. 72 sinus lifts were performed with subsequent implants insertions. We want to underline how the histological results proved that the samples collected after 106 days (Early protocol) with the adding of PRF were constituted by lamellar bone tissue with an interposed stroma that appeared relaxed and richly vascularized. Conclusions. The use of PRF and piezosurgery reduced the healing time, compared to the 150 days described in literature, favoring optimal bone regeneration. At 106 days, it is already possible to achieve good primary stability of endosseous implants, though lacking of functional loading. PMID:23155361

  1. Effects of Reinforcement on Denture Strain in Maxillary Implant Overdentures: An In Vitro Study Under Various Implant Configurations.

    Science.gov (United States)

    Takahashi, Toshihito; Gonda, Tomoya; Maeda, Yoshinobu

    Maxillary implant overdentures are often designed without palatal coverage to maximize wearer comfort. Although palateless dentures have been reported to be less rigid than conventional dentures, and require reinforcement to prevent complications, there is little documentation about the effects of such reinforcement. The purpose of this study was to examine the effects of reinforcement on the strain on maxillary implant overdentures supported by implants in a variety of configurations. A maxillary edentulous model with implants inserted in the anterior, premolar, and molar area was fabricated. Five types of experimental overdentures, with and without reinforcement, were fabricated, and two strain gauges were attached at the anterior midline of the labial and palatal sides. A vertical occlusal load of 98 N was applied through a mandibular complete denture, and the shear strain on the denture was measured. The measurements were compared using the Kruskal-Wallis test (P = .05). On both the labial and palatal sides, the strain on the palateless dentures with reinforcement was significantly lower than the strain on palateless dentures without reinforcement in all implant configurations (P overdenture with residual ridge reinforcement and a palatal bar could reduce the strain in the anterior midline to almost the same level as a denture with palatal coverage. This type of reinforcement may prevent prosthetic and implant complications.

  2. Endoscopic sensing of alveolar pH.

    Science.gov (United States)

    Choudhury, D; Tanner, M G; McAughtrie, S; Yu, F; Mills, B; Choudhary, T R; Seth, S; Craven, T H; Stone, J M; Mati, I K; Campbell, C J; Bradley, M; Williams, C K I; Dhaliwal, K; Birks, T A; Thomson, R R

    2017-01-01

    Previously unobtainable measurements of alveolar pH were obtained using an endoscope-deployable optrode. The pH sensing was achieved using functionalized gold nanoshell sensors and surface enhanced Raman spectroscopy (SERS). The optrode consisted of an asymmetric dual-core optical fiber designed for spatially separating the optical pump delivery and signal collection, in order to circumvent the unwanted Raman signal generated within the fiber. Using this approach, we demonstrate a ~100-fold increase in SERS signal-to-fiber background ratio, and demonstrate multiple site pH sensing with a measurement accuracy of ± 0.07 pH units in the respiratory acini of an ex vivo ovine lung model. We also demonstrate that alveolar pH changes in response to ventilation.

  3. Silver Nanoparticles in Alveolar Bone Surgery Devices

    Directory of Open Access Journals (Sweden)

    Stefano Sivolella

    2012-01-01

    Full Text Available Silver (Ag ions have well-known antimicrobial properties and have been applied as nanostrategies in many medical and surgical fields, including dentistry. The use of silver nanoparticles (Ag NPs may be an option for reducing bacterial adhesion to dental implant surfaces and preventing biofilm formation, containing the risk of peri-implant infections. Modifying the structure or surface of bone grafts and membranes with Ag NPs may also prevent the risk of contamination and infection that are common when alveolar bone augmentation techniques are used. On the other hand, Ag NPs have revealed some toxic effects on cells in vitro and in vivo in animal studies. In this setting, the aim of the present paper is to summarize the principle behind Ag NP-based devices and their clinical applications in alveolar bone and dental implant surgery.

  4. Inferior alveolar nerve block: Alternative technique

    OpenAIRE

    Thangavelu, K.; Kannan, R.; Kumar, N. Senthil

    2012-01-01

    Background: Inferior alveolar nerve block (IANB) is a technique of dental anesthesia, used to produce anesthesia of the mandibular teeth, gingivae of the mandible and lower lip. The conventional IANB is the most commonly used the nerve block technique for achieving local anesthesia for mandibular surgical procedures. In certain cases, however, this nerve block fails, even when performed by the most experienced clinician. Therefore, it would be advantageous to find an alternative simple techni...

  5. Compound odontoma associated with impacted maxillary incisors

    Directory of Open Access Journals (Sweden)

    S Sreedharan

    2012-01-01

    Full Text Available Odontomas are considered to be the most common odontogenic tumors of the oral cavity. Some authors consider it as malformations rather than true neoplasms. The exact etiology of odontomes is still not known. Most odontomes are asymptomatic and are discovered during routine radiographic investigations. Odontomes generally cause disturbances in the eruption of the teeth, most commonly delayed eruption or deflection. The present report describes the surgical management of a case of compound odontoma in a 10-year-old boy who presented with a complaint of swelling in the maxillary right anterior region and retained deciduous incisors. The related literature is also being reviewed in this article.

  6. Maxillary osteosarcoma in a beef suckler cow

    Directory of Open Access Journals (Sweden)

    Prins Diether G J

    2012-07-01

    Full Text Available Abstract A ten-year-old beef suckler cow was referred to the Scottish Centre for Production Animal Health & Food Safety of the University of Glasgow, because of facial swelling in the region of the right maxilla. The facial swelling was first noticed three months earlier and was caused by a slow growing oral mass which contained displaced, loosely embedded teeth. The radiographic, laboratory and clinicopathological findings are described. Necropsy, gross pathology and histological findings confirmed the mass as a maxillary osteosarcoma.

  7. Trans-sinusoidal maxillary distraction in three cleft patients.

    NARCIS (Netherlands)

    Wenghoefer, M.H.; Martini, M.; Nadjmi, N.; Schutyser, F.A.C.; Jagtman, A.K.; Bergé, S.J.

    2006-01-01

    The trans-sinusoidal maxillary distractor (TS-MD) was used to achieve maxillary advancement in three patients with repaired cleft lip and palate. After preoperative computer-aided planning of the distraction vectors, each TS-MD was bent on a stereolithographic model of the maxilla of the patient.

  8. Aspergillus in endodontic infection near the maxillary sinus

    Directory of Open Access Journals (Sweden)

    Cinthya Cristina Gomes

    2015-10-01

    Full Text Available ABSTRACT INTRODUCTION: Diseases of the maxillary sinus have been associated with dental roots near the maxillary sinus that have undergone endodontic treatment. OBJECTIVE: To investigate the presence of filamentous fungi in patients with dental roots near the maxillary sinus who had apical periodontitis treated endodontically, and to alert practitioners that this could be a possible avenue of contamination of the sinus in patients who develop maxillary sinus infection. METHODS: Cross-sectional study in 60 palatal roots of the first maxillary molars near the maxillary sinus, that underwent endodontic treatment for apical periodontitis. After removal of the filling material, dentin shavings were collected and placed in test tubes containing Sabouraud dextrose agar and chloramphenicol. The phenotype was determined by macroscopic and microscopic examination of the colonies. For polymerase chain reaction, the primers ITS-5 and ITS-4 were used. The sequences obtained were compared with those deposited at GenBank using the Basic Local Alignment Search Tool program. RESULTS: Filamentous fungi were isolated from 6 of 60 canals (10%:Aspergillus niger (6.7%, Aspergillus versicolor (1.6%, and Aspergillus fumigatus(1.6%. CONCLUSION: Root canals near the maxillary sinus with endodontic treatment and apical periodontitis may exhibit positive cultures for filamentous fungi. Interested professionals should be alert, because these microorganisms have pathogenic characteristics that can cause disease of odontogenic origin in the maxillary sinus.

  9. Management of an impacted and transposed maxillary canine

    Directory of Open Access Journals (Sweden)

    Deepti A

    2010-03-01

    Full Text Available Maxillary canine-lateral incisor transposition is a relatively rare anomaly, with both dental and facial esthetic implications. This is a case report of a maxillary canine-lateral incisor transposition that was successfully treated by surgical-orthodontic treatment followed by esthetic reshaping of the involved teeth.

  10. Antrolith in the Maxillary Sinus; Report of a Case

    Directory of Open Access Journals (Sweden)

    A. Haraji

    2006-06-01

    Full Text Available A case of maxillary antrolith in a 14-year-old girl is presented. A radiopaque mass,thought to be a supernumerary tooth, was incidentally found on a panoramic radiograph obtained for orthodontic purposes. During surgical exploration the maxillary sinus was penetrated and 6 calcified masses were discovered. Histopathologic analysis revealed a calcium deposition around a necrotic mass.

  11. Aspergillus in endodontic infection near the maxillary sinus.

    Science.gov (United States)

    Gomes, Cinthya Cristina; Pinto, Larissa Christina Costa; Victor, Fernanda Loretti; Silva, Erlange Andrade Borges da; Ribeiro, Apoena de Aguiar; Sarquis, Maria Inês de Moura; Camões, Isabel Coelho Gomes

    2015-01-01

    Diseases of the maxillary sinus have been associated with dental roots near the maxillary sinus that have undergone endodontic treatment. To investigate the presence of filamentous fungi in patients with dental roots near the maxillary sinus who had apical periodontitis treated endodontically, and to alert practitioners that this could be a possible avenue of contamination of the sinus in patients who develop maxillary sinus infection. Cross-sectional study in 60 palatal roots of the first maxillary molars near the maxillary sinus, that underwent endodontic treatment for apical periodontitis. After removal of the filling material, dentin shavings were collected and placed in test tubes containing Sabouraud dextrose agar and chloramphenicol. The phenotype was determined by macroscopic and microscopic examination of the colonies. For polymerase chain reaction, the primers ITS-5 and ITS-4 were used. The sequences obtained were compared with those deposited at GenBank using the Basic Local Alignment Search Tool program. Filamentous fungi were isolated from 6 of 60 canals (10%): Aspergillus niger (6.7%), Aspergillus versicolor (1.6%), and Aspergillus fumigatus (1.6%). Root canals near the maxillary sinus with endodontic treatment and apical periodontitis may exhibit positive cultures for filamentous fungi. Interested professionals should be alert, because these microorganisms have pathogenic characteristics that can cause disease of odontogenic origin in the maxillary sinus. Copyright © 2015 Associação Brasileira de Otorrinolaringologia e Cirurgia Cérvico-Facial. Published by Elsevier Editora Ltda. All rights reserved.

  12. CASE REPORT - Maxillary Herpes Zoster with Corneal Involvement ...

    African Journals Online (AJOL)

    Corneal involvement in maxillary herpes zoster is very rare. This report presents the case of a 32 years old 7 months pregnant para2+1 female, who presented with vesiculopapular rashes with hyperpigmented crusts over the maxillary area of the face on the left side with periocular oedema, conjunctivitis and mild punctate ...

  13. [Percutaneous maxillary nerve block anesthesia in maxillofacial surgery].

    Science.gov (United States)

    Robiony, M; Demitri, V; Costa, F; Politi, M

    1999-01-01

    Personal experience in percutaneous maxillary nerve block anesthesia in association with transmucosal anesthesia of the sphenopalatine ganglion in oral and maxillofacial surgery, is presented. Six Caldwell-Luc, 9 anthrotomies and biopsies of maxillary sinus, 8 removals of extensive odontogenic cysts and 12 surgical maxillary expansions were performed from 1994 to 1996 at our Department. Maxillary transcutaneous nerve block in association with transmucosal anesthesia of the sphenopalatine ganglion were performed. Carbocaine without adrenaline in association with NaCO3 1/10 for maxillary nerve block anesthesia and lidocaineoprilocaine cream (EMLA) for transmucosal anesthesia were employed. Intra- and post-operative pain were evaluated by visual analogue scale in all the patients. Anesthesiological procedures revealed to be effective in all surgical interventions and postoperative analgesia allowed easier pain control. The simplicity of execution, the effective pre- and postoperative anesthesia and the absence of side effects make this procedure particularly indicated in oral and maxillofacial surgery.

  14. Aspergilloma of the maxillary sinus: report of a case

    International Nuclear Information System (INIS)

    Kang, Ju Han; Kim, Gyu Tae; Choi, Yong Suk; Hwang, Eui Hwan; Yu, Jae Jung

    2010-01-01

    Aspergilloma of the paranasal sinus is a non-invasive form of aspergillosis, most often in the maxillary sinus. This case presents an 86-year-old female with aspergilloma of the left maxillary sinus. The patient's chief complaint was intermittent pain on the left maxillary first premolar area. A radiopacification of the left maxillary sinus was observed on the panoramic radiograph. Cone-beam computed tomography revealed complete radiopacification of the left maxillary sinus and scattered multiple radiopaque mass inside the lesion. Biopsy was performed under local anesthesia. On microscopic examination, numerous fungal hyphae, which branch at acute angle, were observed. The diagnosis was made as an aspergilloma based on the histopathologic examination.

  15. Aspergilloma of the maxillary sinus: report of a case

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Ju Han; Kim, Gyu Tae; Choi, Yong Suk; Hwang, Eui Hwan [School of Dentistry, Kung Hee University, Seoul (Korea, Republic of); Yu, Jae Jung [Kangdong Scared Heart Hospital, Hallym Medical Center, Seoul (Korea, Republic of)

    2010-12-15

    Aspergilloma of the paranasal sinus is a non-invasive form of aspergillosis, most often in the maxillary sinus. This case presents an 86-year-old female with aspergilloma of the left maxillary sinus. The patient's chief complaint was intermittent pain on the left maxillary first premolar area. A radiopacification of the left maxillary sinus was observed on the panoramic radiograph. Cone-beam computed tomography revealed complete radiopacification of the left maxillary sinus and scattered multiple radiopaque mass inside the lesion. Biopsy was performed under local anesthesia. On microscopic examination, numerous fungal hyphae, which branch at acute angle, were observed. The diagnosis was made as an aspergilloma based on the histopathologic examination.

  16. Ectopic third molar in maxillary sinus: A rare case report

    Directory of Open Access Journals (Sweden)

    Abhishek Sinha

    2017-01-01

    Full Text Available Ectopic tooth eruption in a non-dental area is a rare entity, and is most common in oral cavity. There have been a few case reports of teeth erupting in mandibular condyle, chin, palate, coronoid process, and maxillary sinus. Ectopic tooth in the maxillary sinus are found incidentally on routine radiological examination, same time they can be symptomatic and associated with pathologies usually dentigerous cyst or odontogenic keratocyst. Facial pain, purulent rhinorrhoea, epistaxis, headache, swelling, and epiphora-related naso-lacrimal duct obstruction can also be seen. By Caldwell-Luc procedure the ectopic teeth within the maxillary sinus are often removed. In this study, a case of ectopic maxillary third molar tooth on right maxillary sinus is presented.

  17. Surgical exposure of an impacted maxillary canine and increasing a band of keratinized gingiva

    Directory of Open Access Journals (Sweden)

    Vijayalakshmi R

    2009-01-01

    Full Text Available An adequate amount of keratinized gingival tissue that is under proper plaque control, is a fundamental requirement for periodontal health. When the teeth erupt uneventfully in the center of the alveolar ridge, an adequate amount of keratinized tissue will surround the erupted permanent tooth. Labially or buccally erupting teeth show reduced dimensions of the gingiva as abnormal eruption of permanent teeth restricts or eliminates the keratinized tissue between the erupting cusp and the deciduous tooth. A lack of attached gingiva poses a potential risk for gingival recession in labially or buccally erupted teeth due to the possibility of accumulation of plaque and/or traumatic tooth-brushing during subsequent orthodontic treatment. A good understanding between the orthodontist and periodontist along with proper management of periodontal tissues, can prevent these problems. Various surgical techniques can be employed to uncover impacted teeth. This paper discusses the validity of utilizing periodontal surgery to increase a band of keratinized tissue in a case of an impacted canine erupting from the alveolar mucosa.

  18. Effects of piezosurgery in accelerating the movement of orthodontic alveolar bone tooth of rats and the expression mechanism of BMP-2.

    Science.gov (United States)

    Han, Jinyou; He, Hong

    2016-11-01

    The aim of the study was to investigate the effects of piezosurgery in accelerating the movement of orthodontic alveolar bone tooth of rats and the expression mechanism of bone morphogenetic protein-2 (BMP-2). Adult male Wistar rats (n=30), with an age range of 14-15 weeks, and an average weight of 250±16 g were used. The animals were randomly divided into the control and observation groups. The rats in the control group were injected with 25-dihydroxyvitamin (1,25-dihydroxycholecalciferol) into their dental ligament. The rats in the observation group were placed with an orthodontic device between the first molar and central incisor in the maxillary. On the first day after animal treatment, piezosurgery stimulation was performed on the first molar in maxillary. The changes of the movement distance of the first molar and gum surface temperature on days 1, 3, 5, 7 and 14 were then compared. Immunohistochemical staining was performed to detect the expression of BMP-2 of periodontal tissue in the tension side of the first molar. Tooth movement distance in the observation group on days 5, 7 and 14 was significantly longer than that in the control group (ppiezosurgery may significantly accelerate the movement of orthodontic alveolar bone tooth of rats and be associated with an increasing BMP-2 expression.

  19. Efficacy and feasibility of frontozygomatic angle approach for extra oral maxillary nerve block in oral surgery: a descriptive clinical trial.

    Science.gov (United States)

    Radder, Kiran; Shah, Ashwin; Fatima, Shereen; Kothari, Chaitanya; Zakaullah, Syed; Siddiqua, Aaisha

    2014-09-01

    and the infraorbital fossa respectively. Peak effect of anesthesia was noted in 66.7, 37.38 and 31.71 s (all values expressed as mean) in palate, infraorbital fossa and posterior superior alveolar areas respectively. Although with only dental extraction as the procedure of choice, the present study has favoured the frontozygomatic angle approach for the maxillary nerve block as simple, safe, efficacious and associated with minimum and clinically mild complications.

  20. A clinical analysis of maxillary sinus cancer

    International Nuclear Information System (INIS)

    Yasumatsu, Ryuji; Nakashima, Torahiko; Ayada, Toranoshin; Shiratsuchi, Hideki; Toh, Satoshi; Komune, Shizuo

    2009-01-01

    Thirty-two patients (23 males, 9 females) with maxillary sinus cancer were treated at Kyushu University Hospital during 2000-2008. They were classified by T classification as 5 cases with T2, 13 with T3, 12 with T4a, and 2 with T4b. Between 2000 and 2003, 16 patients were given irradiation, intra-arterial 5-fluorouracil (5-FU) infusion chemotherapy, maxillectomy and postoperative irradiation. After 2004, two patients with T4b maxillary sinus cancer were treated by superselective intra-arterial chemotherapy with Cisplatin (CDDP) and Docetaxel (DOC) and irradiation. Other patients were given irradiation and chemotherapy with S-1 and intra-arterial infusion of 5-FU. The 3-year survival rate was 68.3% for all patients. The 3-year survival rate was 74.6% for patients treated after 2004, whereas it was 62.5% for patients treated between 2000 and 2003. Chemotherapy with S-1 or superselective intra-arterial chemotherapy with CDDP and DOC improved cause-specific survival rates. (author)

  1. Maxillary molar distalization with first class appliance.

    Science.gov (United States)

    Ramesh, Namitha; Palukunnu, Biswas; Ravindran, Nidhi; Nair, Preeti P

    2014-02-27

    Non-extraction treatment has gained popularity for corrections of mild-to-moderate class II malocclusion over the past few decades. The distalization of maxillary molars is of significant value for treatment of cases with minimal arch discrepancy and mild class II molar relation associated with a normal mandibular arch and acceptable profile. This paper describes our experience with a 16-year-old female patient who reported with irregularly placed upper front teeth and unpleasant smile. The patient was diagnosed to have angles class II malocclusion with moderate maxillary anterior crowding, deep bite of 4 mm on a skeletal class II base with an orthognathic maxilla and retrognathic mandible and normal growth pattern. She presented an ideal profile and so molar distalization was planned with the first-class appliance. Molars were distalised by 8 mm on the right and left quadrants and class I molar relation achieved within 4 months. The space gained was utilised effectively to align the arch and establish a class I molar and canine relation.

  2. Maxillary sinus carcinoma: result of radiation therapy

    International Nuclear Information System (INIS)

    Shibuya, H.; Horiuchi, J.; Suzuki, S.; Shioda, S.; Enomoto, S.

    1984-01-01

    This hundred and sixteen patients with carcinoma of the maxillary sinus received primary therapy consisting of external beam irradiation alone or in combination with surgery and/or chemotherapy at the Department of Radiology, Tokyo Medical and Dental University Hospital, between 1953 and 1982. In our institution, methods of treating cancer of the maxillary sinus have been changed from time to time and showed different control rates and clinical courses. An actuarial 10-year survival rate of 21% has been obtained by the megavoltage irradiation alone as well as 34% actuarial 10-year survival rate by megavoltage irradiation with surgery. After the introduction of conservative surgery followed by conventional trimodal combination therapy, the local control rate has been improved. The amount of functional, cosmetic, and brain damages have been remarkably decreased by this mode of therapy. The actuarial five year survival rate was 67%. In addition, along with the improvement of the local control rate, the control of nodal and distant organ metastases have been emerging as one of the important contributions to the prognosis of this disease

  3. Intranasal Fentanyl Intoxication Leading to Diffuse Alveolar Hemorrhage.

    Science.gov (United States)

    Ruzycki, Shannon; Yarema, Mark; Dunham, Michael; Sadrzadeh, Hossein; Tremblay, Alain

    2016-06-01

    Increasing rates of opioid abuse, particularly fentanyl, may lead to more presentations of unusual effects of opioid toxicity. Diffuse alveolar hemorrhage is a rare complication of fentanyl overdose. A 45-year-old male presented in hypoxic respiratory failure secondary to diffuse alveolar hemorrhage requiring intubation. Comprehensive drug screening detected fentanyl without exposure to cocaine. Further history upon the patient's recovery revealed exposure to snorted fentanyl powder immediately prior to presentation. Diffuse alveolar hemorrhage is a potential, though rare, presentation of opioid intoxication. Recognition of less common complications of opioid abuse such as diffuse alveolar hemorrhage is important in proper management of overdoses.

  4. Anterior superior alveolar nerve injury after extended endoscopic medial maxillectomy: a preclinical study to predict neurological morbidity.

    Science.gov (United States)

    Schreiber, Alberto; Mattavelli, Davide; Ferrari, Marco; Rampinelli, Vittorio; Lancini, Davide; Ravanelli, Marco; Bertazzoni, Giacomo; Rodella, Luigi Fabrizio; Buffoli, Barbara; Doglietto, Francesco; Nicolai, Piero

    2017-10-01

    Endoscopic medial maxillectomies (EMMs) are used to optimize exposure of the maxillary sinus and retromaxillary areas. Although in type D EMM (Sturmann-Canfield procedure) the anterior superior alveolar nerve (ASAN) is always at risk of injury, only 29% of patients complained of alveolar process and dental anesthesia. The purpose of this anatomical study is to assess the neural anastomotic network of the ASAN (ASAN-NAN) and describe different extensions of type D EMMs in a preclinical setting. The ASAN and its medial anastomotic branches (MABs) and lateral anastomotic branches (LABs) were evaluated by cone-beam computerized tomography (CBCT). Five different extensions of type D (D1 to D5) EMMs were identified and nerves at risk of injury in each type were assessed by CBCT. Moreover, quantification of surgical corridors was performed on cadaver heads with a neuronavigation system. Fifty-seven CBCT scans were analyzed. The ASAN would be spared in 16.3% of cases with a type D1 EMM, while it would be injured in the majority of type D2 to D5 resections. At least 1 nerve of the ASAN-NAN was spared in 96.6%, 93%, 74.6%, 0%, and 65.8% of type D1 to D5 EMMs, respectively. Two cadaver heads were dissected and the incremental volume and number of maxillary subsites exposed was assessed in type D1 to D5 EMMs. ASAN function impairment is probably compensated by LABs and MABs. If this hypothesis will be validated in a prospective study on patients, preoperative CBCT evaluation could predict neurological morbidity after type D EMM, and allow tailoring the procedure to minimize impairment of the ASAN-NAN. © 2017 ARS-AAOA, LLC.

  5. Palatal approach of anterior superior alveolar injection technique may not be potentially useful in periodontal procedures

    Directory of Open Access Journals (Sweden)

    Pragathi Raghavendra Bhat

    2016-01-01

    Full Text Available Background: The palatal approach of anterior superior alveolar (P-ASA using WAND injection was reported to effectively provide a profound bilateral maxillary anesthesia of the soft tissue of anterior one-third of the palate and facial gingivae extending from canine to canine which lasted for more than an hour thus making it ideal for scaling root planing and minor periodontal procedures in the anterior maxilla. Our study suggests that the conventional P-ASA injection is of very short duration and the extent of anesthesia was not profound and consistent. This has not been reported earlier in the literature. Materials and Methods: Thirty-five cases (20 males and 15 females, who underwent scaling, root planing and minor periodontal surgical procedures such as abscess drainage, gingivectomy, and frenectomy in the maxillary anterior region in the age range of 19–45 years was assessed for the efficacy of the P-ASA injection. After the administration of the P-ASA injection, the subjective and the objective symptoms were used to evaluate the extent and duration of the anesthesia at 10, 15, and 20 min. Results: This study suggests that the conventional P-ASA injection technique does not provide anesthesia for more than 20 min. Wilcoxon matched pairs test was used to compare the effect of anesthesia at the different time intervals and the results were found to be statistically significant (P < 0.05. Conclusions: The conventional P-ASA injection technique is of very short duration and does not demonstrate effectiveness in periodontal surgery of the anterior maxilla.

  6. Interceptive treatment of palatal impaction of maxillary canines with rapid maxillary expansion: a randomized clinical trial.

    Science.gov (United States)

    Baccetti, Tiziano; Mucedero, Manuela; Leonardi, Maria; Cozza, Paola

    2009-11-01

    Our aim in this prospective randomized clinical study was to assess the prevalence rate of eruption of palatally displaced canines, diagnosed at an early developmental stage with posteroanterior radiographs and consequently treated by rapid maxillary expansion. A sample of 60 subjects in the early mixed dentition with palatally displaced canines diagnosed on posteroanterior radiographs was enrolled in the trial. Their age range at the first observation (T1) was 7.6 to 9.6 years, with a prepubertal stage of skeletal maturity (CS1 or CS2). The 60 subjects were randomly allocated to the treatment group (TG, 35 subjects) or the no-treatment group (NTG, 25 subjects). The TG was treated with a banded rapid maxillary expander; after expansion, all patients were retained with the expander in place for 6 months. Thereafter, the expander was removed, and the patients wore a retention plate at night for a year. The NTG received no treatment. All subjects were reevaluated in the early permanent dentition (T2) (postpubertal CS4). The number of dropouts was recorded. The main outcome recorded at T2 was successful or unsuccessful eruption of the maxillary permanent canines. The starting forms at T1 for measurements on posteroanterior and panoramic films were compared in the 2 groups with the Mann-Whitney U test (P <0.05). The prevalence rates of successful and unsuccessful treatments in the TG were compared with those in NTG with chi-square tests (P <0.05). From T1 to T2, there were 3 dropouts in each group. The final sample comprised 32 subjects in the TG and 22 subjects in the NTG. No statistically significant differences were found for any variable at T1. The prevalence rates of successful eruption of the maxillary canines were 65.7% (21 subjects) in the TG and 13.6% (3 subjects) in the NTG. The comparison was statistically significant (chi-square = 12.4; P <0.001). Subjects with palatally displaced canines in the early mixed dentition do not have transverse deficiency of the

  7. Alignment Strategy for Constricted Maxillary Dental Arch in Patients With Unilateral Cleft Lip and Palate Using Fixed Orthodontic Appliance.

    Science.gov (United States)

    Park, Yoon-Hee; Park, Sumin; Baek, Seung-Hak

    2018-03-01

    The purpose of this study was to compare the alignment pattern of the constricted maxillary dental arch by fixed orthodontic treatment (FOT) in the well-aligned and constricted arches of unilateral cleft lip and palate (UCLP) patients. 19 UCLP patients were divided into Group 1 (well-aligned arch, n = 9) and Group 2 (constricted arch, n = 10). After the cephalometric and maxillary dental arch variables before (T1) and after FOT (T2) were measured, statistical analysis was performed. There were no significant differences in the surgical timing of cheiloplasty, palatoplasty, and secondary alveolar bone grafting and in the surgical method of cheiloplasty between the 2 groups. However, Group 2 had a higher percentage of palatoplasty method, which could leave the denuded bone for secondary healing than Group 1 (P dental arch compared to Group 1 at the T1 stage (inter-second premolar width, greater segment angle [GSA], and lesser segment angle [LSA], all P dental arch shape, different strategy is necessary to obtain proper alignment by FOT.

  8. Quantitative CBCT evaluation of maxillary and mandibular cortical bone thickness and density variability for orthodontic miniplate placement.

    Science.gov (United States)

    Rossi, Margherita; Bruno, Giovanni; De Stefani, Alberto; Perri, Alessandro; Gracco, Antonio

    2017-12-01

    To assess whether cortical bone thickness and density vary in relation to age, sex and skeletal pattern at the maxillary and mandibular areas suitable for miniplates placement for orthodontic purposes. CBCT of 92 subjects (42 males and 50 females) with skeletal class I, II or III malocclusion, divided between adolescents and adults, were examined. InVivoDental ® software (Anatomage Inc, USA) was used to measure 34 maxillary areas and 40 mandibular areas per side. Values obtained were then compared between the groups of subjects. Statistical analysis was performed using the non-parametric Wilcoxon-Mann-Whitney rank-sum test for independent samples. No significant differences were found in the cortical bone thickness values between the three skeletal patterns, and according to sex and age. Both maxilla and mandible showed an increase in cortical bone thickness from the anterior towards the posterior regions, and from the alveolar boneto the basal bone. Cortical bone density significantly varied in relation to the subject's age, with adults always showing higher values. Slight clinically significant differences were found between the three skeletal patterns and sex. In terms of cortical bone thickness, age, sex and skeletal pattern do not represent valid decision criteria for the evaluation of the best insertion areas for miniplates, while in terms of cortical bone density, only age is useful as a decision criterion. Copyright © 2017 CEO. Published by Elsevier Masson SAS. All rights reserved.

  9. Endodontic and periodontal management of a severely affected maxillary lateral incisor having combined mucosal fenestration and palatogingival groove

    Directory of Open Access Journals (Sweden)

    Sarang Sharma

    2015-01-01

    Full Text Available Mucosal fenestrations, wherein the tooth root apices are clinically discernible in the oral cavity subsequent to loss of overlying alveolar bone and mucosa, are rare pathologic entities. Palato gingival grooves- anatomic aberrations are also infrequent occurrences that notoriously predispose to periodontal pathologies of varying extent. Both conditions independently are known to popularly affect maxillary lateral incisors. Coexistent fenestration defect and palato gingival groove in the same tooth is extremely rare and undoubtedly is a perfect combination to precipitate severe endodontic-periodontal consequences. In this report, a 34-year-old patient presented to the dental department with complaint of esthetics in relation to exposed root of right maxillary lateral incisor. On closer inspection, a palato gingival groove in addition to fenestration defect was evident on the root surface along with a periodontal pocket of >5 mm. An interdisciplinary treatment was instituted which included endodontic treatment followed by root end resection, osseous bone graft placement and guided tissue regeneration procedures for repair of mucosal fenestration defect. Debridement of the palatal pocket, with saucerization of the groove and restoration with glass ionomer cement were simultaneously employed to correct the palatal defect.

  10. Effects of diclofenac and celecoxib on osteoclastogenesis during alveolar bone healing, in vivo

    Directory of Open Access Journals (Sweden)

    Parichehr Ghalayani

    2014-01-01

    Full Text Available Background: Osteoclastogenesis is coordinated by the interaction of members of the tumor necrosis factor (TNF superfamily: Receptor activator of nuclear factor- κB ligand (RANKL and Osteoprotegerin (OPG. The aim of this study was to compare the effect of two different types of non-steroidal anti-inflammatory drugs (NSAIDs on the RANKL/OPG balance during the healing of the alveolar process. Materials and Methods: This was an experimental study, carried on 45 male Wistar rats (200 ± 25 g, 8-10 weeks old. After extraction of the right maxillary first molar, 15 rats received 5 mg/kg/day of diclofenac and 15 rats received 15 mg/kg/day of celecoxib and 15 rats received normal saline. The animals were sacrificed 7, 14 and 21 days after tooth extraction. The number of osteoclasts, OPG and RANKL messenger ribonucleic acid expression were determined by tartrate-resistant acid phosphate (TRAP staining and polymerase chain reaction (PCR respectively. The data were analyzed by one-way ANOVA followed by Tukey′s post-hoc test. Values of P < 0.05 were considered significant. Results: On days 7, 14 and 21 the ratio of RANKL/OPG in the control group was higher than diclofenac and celecoxib groups. TRAP immunolabeling of the control group was more than diclofenac group on day 7 and was more than celecoxib group on day 14. On day 21, no significant differences were noted among the three studied groups. Conclusion: Both drugs affect RANKL/OPG gene expression and also osteoclastogenesis in alveolar socket during the experimental period of 21 days.

  11. The Efficacy of Buccal Infiltration of 4% Articaine and PSA Injection of 2% Lidocaine on Anesthesia of Maxillary Second Molars.

    Science.gov (United States)

    Maljaei, Ensiyeh; Pourkazemi, Maryam; Ghanizadeh, Milad; Ranjbar, Rana

    2017-01-01

    During the early mixed dentition period, the location of the deciduous maxillary second molar results in ineffectiveness of the infiltration technique in this area. In such cases, administration of posterior superior alveolar (PSA) nerve block is recommended; however, such a technique has some complications. The present study was undertaken to compare the effects of buccal infiltration of 4% Articaine and PSA technique with 2% Lidocaine on the success of anesthesia of maxillary deciduous second molars in 6 to 9-year old children. In the present double-blind randomized clinical trial, 56 children aged 6-9 years requiring vital pulp therapy of deciduous maxillary second molar were included. In group 1, 4% Articaine was injected using a buccal infiltration technique. In group 2, 2% Lidocaine was injected using the PSA nerve block technique. After 10 min, the caries was removed and access cavity preparation was instituted. The patients were asked to report the presence or absence of pain during the procedure. Therefore, the existence of pain was measured by the patient's self-report. Data were analyzed with descriptive statistical methods and the chi -squared test. Pain was reported by 6 (21.4%) and 9 (32.1%) subjects in the Articaine and Lidocaine groups, respectively. Chi -squared test did not reveal any significant differences between the two groups ( P =0.54). Under the limitations of the present study, there was no significant differences between the results of Articaine buccal infiltration and Lidocaine PSA technique, so Articaine buccal infiltration can be used as a substitute for the PSA technique.

  12. The efficacy of hydrothermally obtained carbonated hydroxyapatite in healing alveolar bone defects in rats with or without corticosteroid treatment.

    Science.gov (United States)

    Marković, Dejan; Jokanović, Vukoman; Petrović, Bojan; Perić, Tamara; Vukomanović, Biserka

    2014-05-01

    Autogenous bone grafting has been the gold standard in clinical cases when bone grafts are required for bone defects in dentistry. The study was undertaken to evaluate multilevel designed carbonated hydroxyapatite (CHA) obtained by hydrothermal method, as a bone substitute in healing bone defects with or without corticosteroid treatment in rats as assessed by histopathologic methods. Bone defects were created in the alveolar bone by teeth extraction in 12 rats. The animals were initially divided into two groups. The experimental group was pretreated with corticosteroids: methylprednisolone and dexamethasone, intramuscularly, while the control group was without therapy. Posterior teeth extraction had been performed after the corticosteroid therapy. The extraction defects were fulfilled with hydroxyapatite with bimodal particle sizes in the range of 50-250 μm and the sample from postextocactional defect of the alveolar bone was analyzed pathohystologically. The histopatological investigations confirmed the biologic properties of the applied material. The evident growth of new bone in the alveolar ridge was clearly noticed in both groups of rats. Carbonated HA obtained by hydrothermal method promoted bone formation in the preformed defects, confirming its efficacy for usage in bone defects. Complete resorption of the material's particles took place after 25 weeks. Hydroxyapatite completely meets the clinical requirements for a bone substitute material. Due to its microstructure, complete resorption took place during the observation period of the study. Corticosteroid treatment did not significantly affect new bone formation in the region of postextractional defects.

  13. Maxillary sinus by-pass with tilted implants via tapered-screw bone expanders in low density bone: one year follow -up of a case series.

    Science.gov (United States)

    Andreasi Bassi, M; Andrisani, C; Lopez, M A; Gaudio, R M; Lombardo, L; Lauritano, D

    2016-01-01

    In the present paper the use of tapered-screw bone expanders (TSBEs) is proposed, in combination with the placement of tilted implants in close proximity to the anterior sinus wall, solving the problem of the reduced height of the alveolar bone in the sub-antral area. The Authors named the procedure: Tilted Implant Expansion Osteotomy (TIEO). Fifteen patients (10 females and 5 males, mean age 47.8±8.15 years) with distal edentulous maxillae were enrolled in this study. For each edentulous site 2 implants were placed, the anterior implant in the area of the most anterior missing tooth while, the posterior implant, immediately in front of the maxillary sinus, with an inclined position. Adopting the aforesaid procedure, 34 cylindrical two-piece implants were placed, 17 of which were placed in tilted position, in order to by-pass the maxillary sinus. After a healing period of 4-6 months, the second stage surgery was performed. The cases were finalized by metal-ceramic cementable restorations with a variable number of elements, from 2 to 4, without any cantilever element. The post finalization follow-up was at 12 months. Survival rate was 100% since no fixtures were lost. At the one-year follow-up the clinical and radiological appearance of the soft and hard tissues was optimal and no pathological signs were recorded. TIEO is a promising surgical procedure for oral rehabilitation of maxillary edentulous sites and represents a therapeutic alternative to sinus lift techniques.

  14. Oak Ridge Leadership Computing Facility (OLCF)

    Data.gov (United States)

    Federal Laboratory Consortium — The Oak Ridge Leadership Computing Facility (OLCF) was established at Oak Ridge National Laboratory in 2004 with the mission of standing up a supercomputer 100 times...

  15. Oak Ridge Geochemical Reconnaissance Program

    International Nuclear Information System (INIS)

    Arendt, J.W.

    1977-03-01

    The Oak Ridge reconnaissance program is responsible for the geochemical survey in a 12-state area covering Texas, Oklahoma, Kansas, Nebraska, South Dakota, North Dakota, Minnesota, Wisconsin, Michigan, Iowa, Indiana, and Illinois as part of the National Uranium Resource Evaluation Program. The program concept is outlined and the planning and organization of the program is discussed

  16. Evaluation of the morphology of the canalis sinuous using cone-beam computed tomography in patients with maxillary impacted canines

    Energy Technology Data Exchange (ETDEWEB)

    Gurler, Gokhan; Delilbsi, Cagri; Ogut, Emine Esen [Istanbul Medipol University School of Dentistry, Istanbul (Turkmenistan); Sakul, Ufuk [Dept. of Anatomy, Istanbul Medipol University School of Medicine, Istanbul (Turkmenistan)

    2017-06-15

    The nasopalatine canal is a well-known, important anatomical structure in the anterior maxilla, but this region contains many accessory canals. The canalis sinuosus (CS) is one of these canals; it contains the anterior superior alveolar nerve, along with veins and arteries. The purpose of this study was to evaluate the CS using conebeam computed tomography (CBCT) in patients with maxillary impacted canines. A total of 111 patients admitted to the Istanbul Medipol University School of Dentistry for the exposure, orthodontic treatment, and/or extraction of an impacted canine were included in this study. CBCT images were obtained for these patients under standard conditions. Axial, coronal, and sagittal sections were evaluated to assess the prevalence of CS, the direction and diameter of the canal, its relation with the impacted canine, and its distance from the alveolar crest. Further, possible correlations with patient gender and age were analyzed. The CS could be detected bilaterally in all the evaluated tomography images. The mean canal diameter was significantly larger in males than in females (P=.001). The CS ran significantly closer to the impacted canine when the canal was located horizontally (P=.03). Variations of the canal, such as accessory canals, were identified in 6 patients. CS is an anatomical entity that may resemble periapical lesions and other anatomical structures. Evaluation with CBCT prior to surgical procedures in the anterior maxilla will help to prevent overlooking such anatomical structures and to decrease possible surgical complications.

  17. Evaluation of the morphology of the canalis sinuous using cone-beam computed tomography in patients with maxillary impacted canines

    International Nuclear Information System (INIS)

    Gurler, Gokhan; Delilbsi, Cagri; Ogut, Emine Esen; Sakul, Ufuk

    2017-01-01

    The nasopalatine canal is a well-known, important anatomical structure in the anterior maxilla, but this region contains many accessory canals. The canalis sinuosus (CS) is one of these canals; it contains the anterior superior alveolar nerve, along with veins and arteries. The purpose of this study was to evaluate the CS using conebeam computed tomography (CBCT) in patients with maxillary impacted canines. A total of 111 patients admitted to the Istanbul Medipol University School of Dentistry for the exposure, orthodontic treatment, and/or extraction of an impacted canine were included in this study. CBCT images were obtained for these patients under standard conditions. Axial, coronal, and sagittal sections were evaluated to assess the prevalence of CS, the direction and diameter of the canal, its relation with the impacted canine, and its distance from the alveolar crest. Further, possible correlations with patient gender and age were analyzed. The CS could be detected bilaterally in all the evaluated tomography images. The mean canal diameter was significantly larger in males than in females (P=.001). The CS ran significantly closer to the impacted canine when the canal was located horizontally (P=.03). Variations of the canal, such as accessory canals, were identified in 6 patients. CS is an anatomical entity that may resemble periapical lesions and other anatomical structures. Evaluation with CBCT prior to surgical procedures in the anterior maxilla will help to prevent overlooking such anatomical structures and to decrease possible surgical complications

  18. CT-MPR invaluable in diagnosing odontogenic maxillary sinusitis

    International Nuclear Information System (INIS)

    Aoki, Hideaki; Shimazu, Kaoru; Kamada, Morito; Shiroyama, Akihiro; Mouri, Daisuke; Yamashita, Masashi; Kawasaki, Yasunori; Koseki, Takakazu; Mouri, Manabu

    2001-01-01

    In everyday examination, it is usual to encounter odontogenic maxillary sinusitis patients. Odontogenic maxillary sinusitis is generally best diagnosed by dental X-ray imaging. Many medical facilities not having a dental X-ray unit use coronal computed tomography (CT) images to diagnose odontogenic maxillary sinusitis. Coronal CT imaging causes artifacts, however due to dental prosthesises. Computed tomography-Multiplanar reformation (CT-MPR) imaging has proved useful in evaluating the paranasal sinus because it is not influenced by dental prosthesises. We evaluated the usefulness of CT-MPR for diagnosing odontogenic maxillary sinusitis by retrospectively analyzing 16 patients, with the following results. We couldn't diagnose all cases of odontogenic maxillary sinusitis in posteroanterior and Waters projection images. Panoramic radiography is needed to diagnose odontogenic maxillary sinusitis. Dental X-ray imaging missed some cases, but all cases were diagnosed by CT-MPR imaging, giving a 100% diagnosestic rate. CT-MPR imaging is thus at least as valuable or better than dental X-ray imaging in diagnosing odontogenic maxillary sinusitis. (author)

  19. Nonunion of the external maxillary distraction in cleft lip and palate: analysis of possible reasons.

    Science.gov (United States)

    He, Dongmei; Genecov, David G; Barcelo, Raul

    2010-10-01

    successful treatment group. Among the 4 nonunion patients, 2 had failed alveolar bone graft before DO, and 3 did not have face mask retention therapy after device removal. The horizontal relapse rate in the 13 successful patients was 1 to 3 mm (mean, 11.9%) after 1 to 3 years of follow-up. All of these patients had good occlusion in the short-term follow-up (1 yr). Five developed end-to-end or Class III malocclusion in the long-term follow-up (1-3 yrs) because of maxillary relapse and continued mandibular growth that required jaw surgery later. A short consolidation time can cause nonunion, and should be lengthened to 12 weeks or more for a stable maxilla. Older age, bilateral CLP, large DO advancement (>15 mm), and compromised bone healing are the risk factors for nonunion. Copyright © 2010 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  20. Management of Cleft Maxillary Hypoplasia with Anterior Maxillary Distraction: Our Experience

    OpenAIRE

    Chacko, Tojan; Vinod, Sankar; Mani, Varghese; George, Arun; Sivaprasad, K. K.

    2013-01-01

    Maxillary hypoplasia is a common developmental problem in cleft lip and palate deformities. Since 1970s these deformities have traditionally been corrected by means of orthognathic surgery. Management of skeletal deformities in the maxillofacial region has been an important challenge for maxillofacial surgeons and orthodontists. Distraction osteogenesis is a surgical technique that uses body’s own repairing mechanisms for optimal reconstruction of the tissues. We present four cases of anterio...

  1. The use of internal maxillary distraction for maxillary hypoplasia: a preliminary report.

    Science.gov (United States)

    Van Sickels, Joseph E; Madsen, Mathew J; Cunningham, Larry L; Bird, Douglas

    2006-12-01

    Distraction osteogenesis is a useful alternative to advance the maxilla in complicated cases of maxillary hypoplasia. The purpose of this article is to review the workup, experience, and preliminary results with the use of internal distraction osteogenesis for maxillary hypoplasia at one teaching institution. Over a 5-year period, more than 300 patients with craniofacial and dentofacial defects have undergone oral and maxillofacial surgery at our center to correct their skeletal discrepancies. Of these, 10 have had maxillary distraction osteogenesis done with internal distractors. Follow-up of 6 months or more was available for 8 patients. Stereolithographic models were used to bend distractors prior to surgery in 6 patients. Latency prior to the start of distraction was 3 to 7 days and varied with the age of the patient. Distraction occurred at approximately 1 mm per day with an average distraction length of 8.5 mm (range, 6-10 mm). Excellent occlusal results were obtained in 5 patients. Major complications including nonunion and failure to achieve acceptable occlusal results were observed in 3 patients. Minor complications including pain and loosening of the distracter devices were observed in 2 patients, but did not appear to affect the esthetic and functional results. Distraction osteogenesis is a useful alternative to traditional orthognathic surgery to treat maxillary hypoplasia. Internal distractions are attractive to patients, but are more difficult to place and can cause discomfort to patients when trying to achieve an ideal primary vector of distraction. Stereolithographic models can help with placement of the device. Changes in design of distractors may help with patient discomfort.

  2. Effects of clodronate on early alveolar bone remodeling and root resorption related to orthodontic forces: a histomorphometric analysis.

    Science.gov (United States)

    Choi, Josefina; Baek, Seung-Hak; Lee, Jae-Il; Chang, Young-Il

    2010-11-01

    The objective of this study was to evaluate the short-term effects of clodronate, a first-generation bisphosphonate, on early alveolar bone remodeling and root resorption related to orthodontic tooth movement. The samples consisted of 54 sex-matched Wistar rats (weight, 180-230 g) allocated to the 2.5 mmol/L clodronate, 10 mmol/L clodronate, and control groups (n = 18 for each group). After application of a nickel-titanium closed-coil spring (force, 60 g) between the maxillary central incisor and first molar, 2.5 mmol/L of clodronate, 10 mmol/L of clodronate, or saline solution was injected into the subperiosteum adjacent to the maxillary first molar every third day. All animals received tetracycline, calcein, and alizarin red by intraperitoneal injection at 1, 6, and 14 days, respectively. The amounts of tooth movement were measured at 3, 6, 9, 12, and 15 days. The animals were killed at 4, 7, and 17 days. Histomorphometric analyses of bone mineral appositional rate, labeled surface, percentage of root resorption area, and number of root resorption lacunae of the mesiobuccal root of the maxillary first molar at 4, 7, and 17 days were done. One-way analysis of variance (ANOVA) with the post-hoc test were done for statistical analyses. Rats in the 10 mmol/L clodronate group had significant decreases of tooth movement (12 and 15 days, P root resorption area and numbers of root resorption lacunae (7 day, P root resorption related to orthodontic tooth movement, patients should be informed about a possible decrease in the amount of tooth movement and a prolonged period of orthodontic treatment. Copyright © 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  3. Introduction of a new removable adjustable intraoral maxillary distraction system for correction of maxillary hypoplasia.

    Science.gov (United States)

    Figueroa, Alvaro A; Polley, John W; Figueroa, Alexander L

    2009-09-01

    Distraction osteogenesis has become a treatment alternative to treat severe craniofacial skeletal dysplasias. A rigid external distraction device has been successfully used to advance the maxilla as well as the maxillary, orbital, and forehead complex (monobloc) in children as young as 2 years, adolescents, and adults. For this severe group of patients, the technique has been found to be simpler and safer than traditional surgical methods. Maxillary and midfacial advancement through distraction has been found to be extremely stable in the patients in whom the technique was used.The authors introduce an intraoral distractor for those patients requiring a moderate maxillary advancement. The advantages of the device include ease of insertion, vector adjustability, reactivation capabilities, and no need for second procedure for its removal.The above approaches have provided predictable and stable results. A detailed description of the device, necessary orthodontic and surgical procedures, case reports, and cephalometric outcomes are presented. The techniques can be applied alone or as an adjunct to traditional orthognathic and craniofacial surgical procedures.

  4. Breakage of internal maxillary distractor: considerable complication of maxillary distraction osteogenesis.

    Science.gov (United States)

    Aikawa, Tomonao; Iida, Seiji; Isomura, Emiko T; Namikawa, Mari; Matsuoka, Yudai; Yamada, Chiaki; Yamamoto, Taku; Takigawa, Yoko

    2008-07-01

    Maxillary distraction osteogenesis using intraoral distractors is now one of the standard treatments of maxillary retrusion. This report shows 2 cases of breakage of this internal maxillary distractor in patients with cleft lip and palate; one was observed during the distraction period and the other was during the retention period. The first case required a rotational movement of the distraction segment, and this movement caused the laterally dislocation of the posterior part of the distractor, where the distractor suffered some mechanical forces by mouth opening. In the latter case, breakage of distractor was observed on the radiographs taken 3 months after distraction and this complication may have been caused by mechanical force by occlusion and mastication. Both breakages were found at the joint of the anchorage plate and the extension rod, which has some flexibility for adjusting the plate to the bone surface. Therefore, surgeons should pay special attention for this mechanical weak area in this distractor not only during the advancement period, but also during the retention period and should avoid unnecessary frequent bending for adopting the bone surface, which directly weakens the joint.

  5. InRidge program: Preliminary results from the first cruise

    Digital Repository Service at National Institute of Oceanography (India)

    Mukhopadhyay, R.; Murthy, K.S.R.; Iyer, S.D.; Rao, M.M.M.; Banerjee, R.; Subrahmanyam, A.S.; Shirodkar, P.V.; Ghose, I.

    The first cruise under India's own Ridge research initiative, InRidge collected new data on bathymetry, free-air gravity and magnetic anomalies across the ridge axis between the Vema and Zhivago transform faults in the Central Indian Ridge...

  6. The beach ridges of India: A review

    Digital Repository Service at National Institute of Oceanography (India)

    Kunte, P.D.; Wagle, B.G.

    , and is presented in a consolidated form. Beach ridges of the east and west coast of India are grouped in thirteen-beach ridge complexes based on their association. Review indicates that the beach ridges of India are not older than the Holocene age...

  7. A histomorphometric study of the effect of doxycycline and erythromycin on bone formation in dental alveolar socket of rat

    Directory of Open Access Journals (Sweden)

    Mohammad Shahabooei

    2015-01-01

    Full Text Available Background: The aim of the present study was to evaluate whether subantimicrobial doses of doxycycline (DOX and erythromycin (EM used for the treatment of peri-implant osteolysis due to their anti-osteoclastogenesis can interfere with the osseous wound healing process in rat alveolar socket. Materials and Methods: Forty-five male Wistar rats had their first maxillary right molar extracted and were divided into three groups. DOX and EM at the doses of 5 mg/kg/day orally (p.o. and 2 mg/kg/day intraperitoneally (i.p. were administered respectively to two separate groups for 7 days after operation. In the control group the animals received normal saline (5 ml/kg. Five rats were sacrificed at 7, 14 and 21 days post-extraction in each study group. A histomorphometric analysis was used to evaluate new bone formation inside the alveolar socket. Significant level was set at 0.05. Results: The findings showed that the percentage of new bone formation (NBF enhanced significantly on days 7 and 14. There was no significant difference in the NBF between DOX and EM groups. Conclusion: Short-term treatment with both DOX and EM enhanced new bone formation without any advances in favor of each drug.

  8. Morphologic study of the maxillary molars. Part II: Internal anatomy.

    Science.gov (United States)

    Pécora, J D; Woelfel, J B; Sousa Neto, M D; Issa, E P

    1992-01-01

    The internal anatomy of three hundred and seventy (370) decalcified and cleared human maxillary molars was studied. Seventy-five percent of the first molars, 58% of the second molars and 68% of the third molars studied presented three (3) root canals and 25% of the first molars, 42% of the second molars and 32% of the third molars presented four (4) root canals. The authors observed that the incidence of two root canals in the mesiobuccal root was higher in second maxillary molars than in first maxillary molars.

  9. Tissue tolerance under the combination treatment of maxillary cancer

    International Nuclear Information System (INIS)

    Egawa, Jun; Ono, Isamu; Suzuki, Kunio; Takeda, Chisato; Ebihara, Satoshi.

    1977-01-01

    The tissue tolerance doses of the maxillary sinus structures were estimated when they were subjected to treatment for maxillary cancer by the usual combination of surgery, radiotherapy and regional arterial infusion of 5-fluorouracil. Equivalent single dose calculation was applied with irreversible tissue damage as an indicator. The retardation of epithelialization of the maxillary sinus operated upon appeared to be correlated with the dose delivered. The study indicated that 2,200 rad expressed by equivalent single dose is a safe dose level for sufficient epithelialization. The safety dose level for the bony structure, exposed by surgery, seemed to be at 1,800 rad. (auth.)

  10. Maxillary sinusitis - a comparative study of different imaging diagnosis methods

    International Nuclear Information System (INIS)

    Hueb, Marcelo Miguel; Borges, Fabiano de Almeida; Pulcinelli, Emilte; Souza, Wandir Ferreira; Borges, Luiz Marcondes

    1999-01-01

    We conducted prospective study comparing different methods (plain X-rays, computed tomography and ultrasonography mode-A) for the initial diagnosis of maxillary sinusitis. Twenty patients (40 maxillary sinuses) with a clinical history suggestive of sinusitis included in this study. The results were classified as abnormal or normal, using computed tomography as gold standard. The sensitivity for ultrasonography and plain X-rays was 84.6% and 69.2%, respectively. The specificity of both methods was 92.6%. This study suggests that ultrasonography can be used as a good follow-up method for patients with maxillary. sinusitis. (author)

  11. Tissue tolerance under the combination treatment of maxillary cancer

    Energy Technology Data Exchange (ETDEWEB)

    Egawa, J [Teikyo Univ., Tokyo (Japan). Faculty of Medicine; Ono, I; Suzuki, K; Takeda, C; Ebihara, S

    1977-06-01

    The tissue tolerance doses of the maxillary sinus structures were estimated when they were subjected to treatment for maxillary cancer by the usual combination of surgery, radiotherapy, and regional arterial infusion of 5-fluorouracil. Equivalent single dose calculation was applied with irreversible tissue damage as an indicator. The retardation of epithelialization of the maxillary sinus operated upon appeared to be correlated with the dose delivered. The study indicated that 2,200 rad expressed by equivalent single dose is a safe dose level for sufficient epithelialization. The safety dose level for the bony structure, exposed by surgery, seemed to be at 1,800 rad.

  12. Maxillary First Molars with 2 Distobuccal Canals: A Case Series.

    Science.gov (United States)

    Fogel, Howard M; Cunha, Rodrigo Sanches

    2017-11-01

    An appreciation of the anatomic complexity of the root canal system is essential at every step of endodontic treatment. Endodontic treatment of teeth with unusual root canal anatomy presents a unique challenge. Eight patients underwent nonsurgical root canal treatment of 3-rooted maxillary first molars in a specialty endodontic private practice. Four cases of Weine type II and 4 cases of Weine type III canal configurations in the distobuccal root of maxillary first molars were presented.This article highlighted an uncommon anatomic variation of 2 canals in the distobuccal root of the maxillary first molar. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  13. Assessment of Alveolar Bone Status in Middle Aged Chinese (40-59 Years with Chronic Periodontitis--Using CBCT.

    Directory of Open Access Journals (Sweden)

    Haijiao Zhao

    Full Text Available This study used con-beam computed tomography (CBCT to investigate the prevalence and severity of alveolar bone loss in middle-aged (40-59 years Chinese with chronic periodontitis.The study group comprised 145 dentate individuals aged 40 to 59 years residing in China who suffered from chronic periodontitis. CBCT and the application of NNT software were used to examine the level and location of alveolar bone loss.The study revealed that 40-59 year old patients with chronic periodontitis had severe bone loss. At 5,286 sites (34.7%, alveolar bone loss was mild; severe alveolar bone loss was found at 5,978 sites (39.2%. A comparison of bone loss in different jaws revealed that the area with the highest degree of bone loss was on the lingual side of the maxillary molar (56.3 ± 7.2%, and that the area with the lowest degree was primarily on the lingual side of the mandibular canine (27.5 ± 6.3%. There was a lower degree of alveolar bone loss in males than females. Differences were observed when comparing the incidence of bone loss between males and females (P < 0.05. Menopause in females and smoking in both genders may affect the level of bone loss. Male smokers experienced a greater degree of bone loss (41.67 ± 5.76% than male non-smokers (32.95 ± 4.31%. A 42.23 ± 6.34% bone loss was found in menopausal females versus 31.35 ± 3.62% in non-menopausal females.The study revealed that different sites and teeth exhibited a diverse degree of bone loss. In middle-aged patients with chronic periodontitis, the highest degrees of bone loss in the incisors, premolars, and molars were on the lingual side, mesial side and lingual side, respectively. Menopause in females and smoking may affect the level of bone loss.

  14. Treatment of traumatized maxillary central incisors

    Directory of Open Access Journals (Sweden)

    Jun Kuo

    2011-12-01

    Full Text Available Traumatic injury to the upper anterior teeth is not uncommon in young children. Dental ankylosis frequently occurs when teeth are traumatically luxated or replanted after being avulsed. Orthodontic movement of a traumatized tooth is difficult, especially when treating an ankylosed tooth without surgical luxation and distraction osteogenesis. This report describes a case of a patient with class I crowded malocclusion and labially displaced and intruded traumatized maxillary incisors. The protruded traumatized incisors were successfully brought to an acceptable position with acceptable gingival esthetics through the use of simple orthodontic traction combined with first-premolar extraction. An acceptable overbite and overjet were achieved within 14 months after completion of orthodontic treatment.

  15. Lymph node metastasis in maxillary sinus carcinoma

    International Nuclear Information System (INIS)

    Le, Q.-T.; Fu, Karen K.; Kaplan, Michael J.; Terris, David J.; Fee, Willard E.; Goffinet, Don R.

    2000-01-01

    Purpose: To evaluate the incidence and prognostic significance of lymph node metastasis in maxillary sinus carcinoma. Methods and Materials: We reviewed the records of 97 patients treated for maxillary sinus carcinoma with radiotherapy at Stanford University and at the University of California, San Francisco between 1959 and 1996. Fifty-eight patients had squamous cell carcinoma (SCC), 4 had adenocarcinoma (ADE), 16 had undifferentiated carcinoma (UC), and 19 had adenoid cystic carcinoma (AC). Eight patients had T2, 36 had T3, and 53 had T4 tumors according to the 1997 AJCC staging system. Eleven patients had nodal involvement at diagnosis: 9 with SCC, 1 with UC, and 1 with AC. The most common sites of nodal involvement were ipsilateral level 1 and 2 lymph nodes. Thirty-six patients were treated with definitive radiotherapy alone, and 61 received a combination of surgical and radiation treatment. Thirty-six patients had neck irradiation, 25 of whom received elective neck irradiation (ENI) for N0 necks. The median follow-up for alive patients was 78 months. Results: The median survival for all patients was 22 months (range: 2.4-356 months). The 5- and 10-year actuarial survivals were 34% and 31%, respectively. Ten patients relapsed in the neck, with a 5-year actuarial risk of nodal relapse of 12%. The 5-year risk of neck relapse was 14% for SCC, 25% for ADE, and 7% for both UC and ACC. The overall risk of nodal involvement at either diagnosis or on follow-up was 28% for SCC, 25% for ADE, 12% for UC, and 10% for AC. All patients with nodal involvement had T3-4, and none had T2 tumors. ENI effectively prevented nodal relapse in patients with SCC and N0 neck; the 5-year actuarial risk of nodal relapse was 20% for patients without ENI and 0% for those with elective neck therapy. There was no correlation between neck relapse and primary tumor control or tumor extension into areas containing a rich lymphatic network. The most common sites of nodal relapse were in the

  16. Forty cases of maxillary sinus carcinoma

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, Go; Yamada, Shoichiro; Sawatsubashi, Motohiro; Miyazaki, Junji; Tsuda, Kuniyoshi; Inokuchi, Akira [Saga Medical School (Japan)

    2002-01-01

    Forty patients with squamous cell carcinoma in the maxillary sinus were investigated between 1989 and 1999. They consisted of 28 males and 12 females. Their ages ranged from 18 to 84 years (mean 62 years). According to the 1987 UICC TNM classification system, 3 patients were classified as stage II, 3 were stage III and 34 were stage IV. The overall three-year and five-year survival rates were 52% and 44%, respectively. Local recurrence was observed in 11 stage IV cases and 10 of them were not controlled. For further improving the prognosis of such patients, new techniques such as skull base surgery, super selective intraarterial chemotherapy, and concurrent chemo-radiation should be included in the treatment regimen. (author)

  17. Increased alveolar soluble Annexin V promotes lung inflammation and fibrosis

    OpenAIRE

    Buckley, S.; Shi, W.; Xu, W.; Frey, M.R.; Moats, R.; Pardo, A.; Selman, M.; Warburton, D.

    2015-01-01

    The causes underlying the self-perpetuating nature of idiopathic pulmonary fibrosis (IPF), a progressive and usually lethal disease, remain unknown. We hypothesized that alveolar soluble Annexin V contributes to lung fibrosis, based on the observation that human IPF BALF containing high Annexin V levels promoted fibroblast involvement in alveolar epithelial wound healing that was reduced when Annexin V was depleted from the BALF.

  18. Role of alveolar topology on acinar flows and convective mixing.

    Science.gov (United States)

    Hofemeier, Philipp; Sznitman, Josué

    2014-06-01

    Due to experimental challenges, computational simulations are often sought to quantify inhaled aerosol transport in the pulmonary acinus. Commonly, these are performed using generic alveolar topologies, including spheres, toroids, and polyhedra, to mimic the complex acinar morphology. Yet, local acinar flows and ensuing particle transport are anticipated to be influenced by the specific morphological structures. We have assessed a range of acinar models under self-similar breathing conditions with respect to alveolar flow patterns, convective flow mixing, and deposition of fine particles (1.3 μm diameter). By tracking passive tracers over cumulative breathing cycles, we find that irreversible flow mixing correlates with the location and strength of the recirculating vortex inside the cavity. Such effects are strongest in proximal acinar generations where the ratio of alveolar to ductal flow rates is low and interalveolar disparities are most apparent. Our results for multi-alveolated acinar ducts highlight that fine 1 μm inhaled particles subject to alveolar flows are sensitive to the alveolar topology, underlining interalveolar disparities in particle deposition patterns. Despite the simplicity of the acinar models investigated, our findings suggest that alveolar topologies influence more significantly local flow patterns and deposition sites of fine particles for upper generations emphasizing the importance of the selected acinar model. In distal acinar generations, however, the alveolar geometry primarily needs to mimic the space-filling alveolar arrangement dictated by lung morphology.

  19. Structural changes and effect of denopamine on alveolar fluid ...

    African Journals Online (AJOL)

    GREGORY

    2010-09-13

    Sep 13, 2010 ... alveolar fluid clearance in hypoxic rat lungs. Nai-jing Li1, Wei Li2, ... for absorption of excess alveolar fluid (Sartori et al.,. 2001 ... free access to food and water. ..... Dopamine increases lung liquid clearance during mechanical.

  20. Diffuse alveolar hemorrhage in a young woman with systemic lupus ...

    African Journals Online (AJOL)

    Diffuse Alveolar Hemorrhage (DAH) is rarely reported complication of Systemic Lupus Erythematosus (SLE). A young woman diagnosed SLE, with a previously normal plain chest radiograph, developed acute onset cough, dyspnoea and hemoptysis. The repeat urgent chest radiograph revealed alveolar opacities. The triad ...

  1. Anterior maxillary segmental distraction for correction of maxillary hypoplasia and dental crowding in cleft palate patients: a preliminary report.

    Science.gov (United States)

    Wang, X-X; Wang, X; Li, Z-L; Yi, B; Liang, C; Jia, Y-L; Zou, B-S

    2009-12-01

    To evaluate the feasibility of anterior maxillary segmental distraction (AMSD) to correct maxillary hypoplasia and severe dental crowding in cleft lip and palate (CLP) patients, 7 patients (average age 16.4 years) with maxillary hypoplasia, shortened maxillary dental arch length and severe anterior dental crowding secondary to CLP were selected for this study. After anterior maxillary segmental osteotomy, 3 patients were treated using bilateral internal distraction devices, and 4 patients were treated using rigid external distraction devices. Photographs and radiographs were taken to review the improvement in facial profile and occlusion after distraction. An average 10.25 mm anterior maxillary advancement was obtained in all patients after 10-23 days of distraction and 9-16 weeks of consolidation. The sella-nasion-point A (SNA) angle increased from 69.5 degrees to 79.6 degrees. Midface convexity was greatly improved and velopharyngeal competence was preserved. The maxillary dental arch length was greatly increased by 10.1 mm (P<0.01). Dental crowding and malocclusion were corrected by orthodontic treatment. These results show that AMSD can effectively correct the hypoplastic maxilla and severe dental crowding associated with CLP by increasing the midface convexity and dental arch length while preserving velopharyngeal function, and dental crowding can be corrected without requiring tooth extraction.

  2. A minipig model of maxillary distraction osteogenesis.

    Science.gov (United States)

    Papadaki, Maria E; Troulis, Maria J; Glowacki, Julie; Kaban, Leonard B

    2010-11-01

    To establish a porcine model for maxillary distraction osteogenesis and to document the sequence of bone formation in the zone of advancement. Female Yucatan minipigs (n = 9) in the mixed dentition stage underwent modified Le Fort I osteotomy through a vestibular incision under general anesthesia. A unidirectional, semiburied Le Fort I distraction device was fixed across the osteotomy. The distraction protocol was 0-day latency, 1-mm/d rate for 12 days, and 24 days of fixation. Maxillary specimens (n = 9) were harvested and divided in half at the end of distraction (n = 6 sides), midfixation (n = 6), and the end of fixation (n = 6). Clinical stability, volume, and radiographic density across the zone of advancement were graded on semiquantitative scales. Specimens were stained with hematoxylin and eosin and examined with light microscopy. Animals tolerated the operation, the distraction and fixation periods. There were no infections and no devices failed. At the end of the distraction period, bone trabeculae were present at the periphery and fibrous tissues, and vessels, preosteoblasts, and osteoblasts were present in the center of the zone of advancement. Islands of chondrocyte-like cells appeared in 1 specimen each at midfixation and the end of fixation. At the end of fixation, clinical stability and radiographic density were graded 3/3 and bone formation was complete across the advancement zone in all specimens. A model for Le Fort I distraction osteogenesis was established. Intramembranous bone formation was the predominant mechanism of healing in the zone of advancement. Latency was not necessary for bone formation in this minipig model. Copyright © 2010 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  3. Autogenous transplantation of maxillary and mandibular molars.

    Science.gov (United States)

    Reich, Peter P

    2008-11-01

    Autogenous tooth transplantation has been used as a predictable surgical approach to correct malocclusion and replace edentulous areas. This article focuses on the surgical approach and technique for molar transplantation. Thirty-two patients aged between 11 and 25 years underwent 44 autogenous molar transplantations. The procedure involved transplantation of impacted or newly erupted third molars into the extraction sockets of nonrestorable molars and surgical removal and replacement of horizontally impacted molars into their proper vertical alignment. Five basic procedural concepts were applied: 1) atraumatic extraction, avoiding disruption of the root sheath and root buds; 2) apical contouring of bone at the transplantation site and maxillary sinus lift via the Summers osteotome technique, when indicated, for maxillary molars; 3) preparation of a 4-wall bony socket; 4) avoidance of premature occlusal interferences; and 5) stabilization of the tooth with placement of a basket suture. All 32 patients successfully underwent the planned procedure. To date, 2 patients have had localized infection that resulted in loss of the transplant. The remaining 42 transplants remain asymptomatic and functioning, with a mean follow-up period of 19 months. No infection, ankylosis, loss of the transplant, or root resorption has been noted. In addition, endodontic therapy has not been necessary on any transplanted teeth. Autogenous tooth transplantation has been discussed and described in the literature previously, with a primary focus on cuspid and bicuspid transplantation. The molar transplant is infrequently discussed in today's literature, possibly because of the preponderance of titanium dental implants. Autogenous molar transplantation is a viable procedure with low morbidity and excellent functional and esthetic outcomes. This report shows the successful transplantation of 42 of 44 molars in 32 patients with a mean follow-up period of 19 months.

  4. Assessment of periodontal status following the alignment of impacted permanent maxillary canine teeth.

    Science.gov (United States)

    Szarmach, I J; Szarmach, J; Waszkiel, D; Paniczko, A

    2006-01-01

    The aim of the study was to assess the effect of orthodontic movement of the impacted canines after surgical exposure and alignment on the periodontal status of the transpositioned and adjacent teeth as well as to compare certain parameters with those of spontaneously erupted teeth. Twenty-four patients (mean age 18.4 +/- 3.66) with unilaterally impacted 24 canines were enrolled in the study. The following parameters were assessed: pocket depth (PD), clinical attachment level (CAL), platelet index (PI) of Silness and Löe, and modified sulcus bleeding index (SBI). Optic density of the alveolar bone along the root surface of the aligned canine was analysed based on digital radiological images made with the right angle technique. Control group consisted of spontaneously erupted teeth. In comparison to the control group, in the orthodonticaly treated group PD was found to increase on the mesial buccal and palatal surfaces of the first premolar (p aligned canine (p aligned tooth were statistically significant (p alignment zone and the control, and there was no link between the method of treatment and periodontal status, either. The alignment of the impacted permanent maxillary canines poses a risk of periodontal deterioration. Patients subjected to surgical-orthodontic treatment require periodic periodontal follow-ups.

  5. Tooth-Borne Anterior Maxillary Distraction for Cleft Maxillary Hypoplasia: Our Experience With 147 Patients.

    Science.gov (United States)

    Richardson, Sunil; Selvaraj, Dhivakar; Khandeparker, Rakshit V; Seelan, Nikkie S; Richardson, Shweta

    2016-12-01

    To evaluate the results of anterior maxillary distraction for its efficacy and long-term stability in the management of cleft maxillary hypoplasia in a large series of patients with a long-term follow-up extending to 4 years. One hundred sixty-four patients at least 10 years old with cleft maxillary hypoplasia who presented to the authors' unit from January 2009 through October 2014 were evaluated retrospectively, irrespective of gender, type of cleft lip and palate, and amount of advancement needed. Anterior maxillary distraction using a tooth-borne distractor appliance was carried out in all patients and all patients were followed up to 4 years (range, 1 to 4 yr) to evaluate the stability of the procedure and to document any relapse using digitalized lateral cephalograms taken before distraction, immediately after distraction (T2), and at the last follow-up visit (T3; range, 1 to 4 yr). Seventeen patients were subsequently lost to follow-up; therefore, a complete set of records was available for 147 patients. In a subset of 50 patients, perceptual speech assessment was carried out preoperatively and 6 months postoperatively by 2 speech pathologists using the Perkins scoring system that allowed the evaluation of 5 parameters (velopharyngeal insufficiency, resonance, nasal air emission, articulation, and intelligibility). None of these patients underwent speech therapy during the course of evaluation. The development of complications intra- or postoperatively was noted. The data were tabulated and analyzed. An advancement ranging from 4.0 to 13.1 mm (mean, 9.42 mm) was achieved in all patients. One hundred forty patients (95.23%) showed stable results on lateral cephalograms and when T2 values were compared with T3 values. Seven patients (4.76%) exhibited skeletal relapse in various linear and angular measurements assessed on lateral cephalograms. At 6-month follow-up, improvements of 62% (n = 31), 64% (n = 32), 50% (n = 25), 68% (n = 34), and 70% (n

  6. Investigation of a Novel PLGA/CaP Scaffold in the Healing of Tooth Extraction Sockets to Alveolar Bone Preservation in Humans.

    Science.gov (United States)

    Araujo-Pires, Ana Claudia; Mendes, Vanessa Cristina; Ferreira-Junior, Osny; Carvalho, Paulo Sérgio Perri; Guan, Limin; Davies, John Edward

    2016-06-01

    It is expected that 40% to 60% of initial alveolar bone volume will be lost up to 6 months after tooth extraction. OsteoScaf(TM) (TRT, Toronto, ON, Canada) (poly (DL-lactide-co-glycololide/calcium phosphate [PLGA/CaP] scaffold) is a novel bone substitute material and represents a promising alternative for maintaining alveolar bone integrity in this clinical scenario. Here it was hypothesized that OsteoScaf would reduce alveolar bone lost after tooth extraction in patient, acting as a clot-retention device. A total of 10 patients (32 sockets) were included in the study, of which 16 sockets were grafted with OsteoScaf and 16 were used as control (coagulum alone). Cone beam computed tomography (CBCT) was performed both immediately following extraction and also at 120 days postoperatively, at which time biopsy samples were also harvested for histological analyses. Quantitative analysis of CBCT showed less bone resorption in the OsteoScaf groups, being 10.5% to 14.4% less bone lost in the center of the socket, 15.4% in the buccal region, and 12.6% in the palatal. Qualitative histological analysis showed new bone tissue in direct apposition to the scaffold - demonstrating its osteoconductive nature. OsteoScaf diminished the expected bone lost during the postextraction remodeling of the alveolar bone ridge at 120 days postextraction. © 2015 Wiley Periodicals, Inc.

  7. Le Fort I Maxillary Advancement Using Distraction Osteogenesis

    Science.gov (United States)

    Combs, Patrick D.; Harshbarger, Raymond J.

    2014-01-01

    Treatment of maxillary hypoplasia has traditionally involved conventional Le Fort I osteotomies and advancement. Advancements of greater than 10 mm risk significant relapse. This risk is greater in the cleft lip and palate population, whose anatomy and soft tissue scarring from prior procedures contributes to instability of conventional maxillary advancement. Le Fort I advancement with distraction osteogenesis has emerged as viable, stable treatment modality correction of severe maxillary hypoplasia in cleft, syndromic, and noncleft patients. In this article, the authors provide a review of current data and recommendations concerning Le Fort I advancement with distraction osteogenesis. In addition, they outline their technique for treating severe maxillary hypoplasia with distraction osteogenesis using internal devices. PMID:25383054

  8. Bilateral postoperative maxillary cysts after orthognathic surgery: A case report

    International Nuclear Information System (INIS)

    Lee, Jung Hye; Huh, Kyung Hoe; Yi, Won Jin; Heo, Min Suk; Lee, Sam Sun; Choi, Soon Chul

    2014-01-01

    Postoperative maxillary cysts are locally aggressive lesions, usually developing as delayed complications many years after radical antral surgery. This report describes a case of bilateral postoperative maxillary cysts following orthognathic surgery performed approximately 21 years previously. The patient complained of stinging pain on her right cheek. Radiographic examination revealed low-attenuation lesions on both maxillary sinuses with discontinuously corticated margins without distinct expansion or bone destruction. The cysts were enucleated with the removal of metal plates and screws for pain relief. Histopathological examination confirmed the diagnosis of postoperative maxillary cysts lined by ciliated, pseudostratified columnar cells. The patient has remained asymptomatic thus far, and there was no evidence of local recurrence at 21 months of postoperative follow-up.

  9. Bilateral maxillary fused second and third molars: a rare occurrence.

    Science.gov (United States)

    Liang, Rui-Zhen; Wu, Jin-Tao; Wu, You-Nong; Smales, Roger J; Hu, Ming; Yu, Jin-Hua; Zhang, Guang-Dong

    2012-12-01

    This case report describes the diagnosis and endodontic therapy of maxillary fused second and third molars, using cone-beam computed tomography (CBCT). A 31-year-old Chinese male, with no contributory medical or family/social history, presented with throbbing pain in the maxillary right molar area following an unsuccessful attempted tooth extraction. Clinical examination revealed what appeared initially to be a damaged large extra cusp on the buccal aspect of the distobuccal cusp of the second molar. However, CBCT revealed that a third molar was fused to the second molar. Unexpectedly, the maxillary left third molar also was fused to the second molar, and the crown of an unerupted supernumerary fourth molar was possibly also fused to the apical root region of the second molar. Operative procedures should not be attempted without adequate radiographic investigation. CBCT allowed the precise location of the root canals of the right maxillary fused molar teeth to permit successful endodontic therapy, confirmed after 6 months.

  10. Bilateral postoperative maxillary cysts after orthognathic surgery: A case report

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Hye; Huh, Kyung Hoe; Yi, Won Jin; Heo, Min Suk; Lee, Sam Sun; Choi, Soon Chul [Dept. of Oral and Maxillofacial Radiology and Dental Research Institute, School of Dentistry, Seoul National University, Seoul (Korea, Republic of)

    2014-12-15

    Postoperative maxillary cysts are locally aggressive lesions, usually developing as delayed complications many years after radical antral surgery. This report describes a case of bilateral postoperative maxillary cysts following orthognathic surgery performed approximately 21 years previously. The patient complained of stinging pain on her right cheek. Radiographic examination revealed low-attenuation lesions on both maxillary sinuses with discontinuously corticated margins without distinct expansion or bone destruction. The cysts were enucleated with the removal of metal plates and screws for pain relief. Histopathological examination confirmed the diagnosis of postoperative maxillary cysts lined by ciliated, pseudostratified columnar cells. The patient has remained asymptomatic thus far, and there was no evidence of local recurrence at 21 months of postoperative follow-up.

  11. Unusual anatomy of maxillary central incisor with two roots

    Directory of Open Access Journals (Sweden)

    T S Ashwini Shivakumar

    2012-01-01

    Full Text Available Introduction: Knowledge of root canal morphology is essential for successful endodontic therapy. Failure to recognize unusual root canal anatomy may lead to unsuccessful endodontic treatment. Case Report: This case report describes the successful endodontic treatment of the maxillary central incisor with unusual anatomy of two roots and two root canals. A 23-year-old male patient was referred for dental consultation with discoloration of the maxillary right central incisor with periapical lesion, which revealed unusual anatomy of root on radiographic examination, and was confirmed upon exploration. Discussion: As described by Vertucci, the maxillary central incisor presents a single root and single root canal in 100% of the cases. However, few cases of maxillary central incisors with two canals were reported in the literature, most of which were associated with developmental anomalies like fusion, germination or dens invaginatus. Clinician should be aware of the unusual anatomical variations that should be detected by the different diagnostic resources available.

  12. Surgical Splint Design Influences Transverse Expansion in Segmental Maxillary Osteotomies

    DEFF Research Database (Denmark)

    Stokbro, Kasper; Aagaard, Esben; Torkov, Peter

    2017-01-01

    splint designs on achieving the planned transverse expansion in bimaxillary surgery with segmental maxillary procedures. Materials and Methods: Forty-two participants were included in a retrospective observational study. All participants had completed virtually planned bimaxillary surgery with 3-piece......Purpose: In segmental maxillary procedures, it is imperative to obtain as much of the planned expansion as possible. Lack of obtained expansion, in addition to late relapse after splint removal, can result in relapse of the posterior crossbite. This study investigated the influence of 2 surgical...... maxillary segmentation. The primary outcome variable was the transverse expansion obtained, measured as the expansion between the maxillary first molars on preoperative and postoperative cone-beam computed tomograms. The postoperative scan was performed 1 week after surgery with the splint still in place...

  13. Radicular cyst of maxillary primary tooth: Report of two cases

    Directory of Open Access Journals (Sweden)

    Vinod Vijay Chander

    2014-01-01

    Full Text Available Radicular cyst is one of the most common odontogenic cysts of the jaws, but those arising from primary teeth are very rare. This article reports two such rare cases incidentally affecting deciduous maxillary teeth.

  14. Simplified Model Surgery Technique for Segmental Maxillary Surgeries

    Directory of Open Access Journals (Sweden)

    Namit Nagar

    2011-01-01

    Full Text Available Model surgery is the dental cast version of cephalometric prediction of surgical results. Patients having vertical maxillary excess with prognathism invariably require Lefort I osteotomy with maxillary segmentation and maxillary first premolar extractions during surgery. Traditionally, model surgeries in these cases have been done by sawing the model through the first premolar interproximal area and removing that segment. This clinical innovation employed the use of X-ray film strips as separators in maxillary first premolar interproximal area. The method advocated is a time-saving procedure where no special clinical or laboratory tools, such as plaster saw (with accompanying plaster dust, were required and reusable separators were made from old and discarded X-ray films.

  15. Kinetics of gene expression of alkaline phosphatase during healing of alveolar bone in rats.

    Science.gov (United States)

    Rodrigues, Willian Caetano; Fabris, André Luís da Silva; Hassumi, Jaqueline Suemi; Gonçalves, Alaíde; Sonoda, Celso Koogi; Okamoto, Roberta

    2016-06-01

    Immunohistochemical studies and molecular biology have enabled us to identify numerous proteins that are involved in the metabolism of bone, and their encoding genes. Among these is alkaline phosphatase (ALP), an enzyme that is responsible for the initiation of mineralisation of the extracellular matrix during alveolar bone repair. To evaluate the gene expression of ALP during this process, we studied nine healthy adult male rats, which had their maxillary central incisors extracted from the right side and were randomly divided into three groups. During three experimental periods, 7 days, 14 days, and 28 days, the alveoli were curetted, the rats killed, and samples analysed by real-time reverse transcription polymerase chain reaction (qRT-PCR). The RNAm that encodes the gene for the synthesis of ALP was expressed during the three periods analysed, but its concentration was significantly increased at 14 and 28 days compared with at 7 days. There was no significant difference between 14 and 28 days (p=0.0005). We conclude that genes related to ALP are expressed throughout the healing process and more intensively during the later periods (14 and 28 days), which coincides with the increased formation of mineralised bone. Copyright © 2016 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  16. Bilateral maxillary fused second and third molars: a rare occurrence

    OpenAIRE

    Liang, Rui-Zhen; Wu, Jin-Tao; Wu, You-Nong; Smales, Roger J; Hu, Ming; Yu, Jin-Hua; Zhang, Guang-Dong

    2012-01-01

    This case report describes the diagnosis and endodontic therapy of maxillary fused second and third molars, using cone-beam computed tomography (CBCT). A 31-year-old Chinese male, with no contributory medical or family/social history, presented with throbbing pain in the maxillary right molar area following an unsuccessful attempted tooth extraction. Clinical examination revealed what appeared initially to be a damaged large extra cusp on the buccal aspect of the distobuccal cusp of the secon...

  17. Agenesis of maxillary lateral incisors and associated dental anomalies.

    Science.gov (United States)

    Garib, Daniela Gamba; Alencar, Bárbara Maria; Lauris, José Roberto Pereira; Baccetti, Tiziano

    2010-06-01

    The objectives of this study were to evaluate the prevalence of dental anomalies in patients with agenesis of maxillary lateral incisors and to compare the findings with the prevalence of these anomalies in the general population. A sample of 126 patients, aged 7 to 35 years, with agenesis of at least 1 maxillary lateral incisor was selected. Panoramic and periapical radiographs and dental casts were used to analyze other associated dental anomalies, including agenesis of other permanent teeth, ectopia of unerupted permanent teeth, microdontia of maxillary lateral incisors, and supernumerary teeth. The occurrence of these anomalies was compared with prevalence data previously reported for the general population. Statistical testing was performed with the chi-square test (P <0.05) and the odds ratio. Patients with maxillary lateral incisor agenesis had a significantly increased prevalence rate of permanent tooth agenesis (18.2%), excluding the third molars. The occurrence of third-molar agenesis in a subgroup aged 14 years or older (n = 76) was 35.5%. The frequencies of maxillary second premolar agenesis (10.3%), mandibular second premolar agenesis (7.9%), microdontia of maxillary lateral incisors (38.8%), and distoangulation of mandibular second premolars (3.9%) were significantly increased in our sample compared with the general population. In a subgroup of patients aged 10 years or older (n = 115), the prevalence of palatally displaced canines was elevated (5.2%). The prevalences of mesioangulation of mandibular second molars and supernumerary teeth were not higher in the sample. Permanent tooth agenesis, maxillary lateral incisor microdontia, palatally displaced canines, and distoangulation of mandibular second premolars are frequently associated with maxillary lateral incisor agenesis, providing additional evidence of a genetic interrelationship in the causes of these dental anomalies. 2010 American Association of Orthodontists. Published by Mosby, Inc. All

  18. Unusual anatomy of maxillary central incisor with two roots

    OpenAIRE

    T S Ashwini Shivakumar; Saleem Makandar; Ajay Kadam

    2012-01-01

    Introduction: Knowledge of root canal morphology is essential for successful endodontic therapy. Failure to recognize unusual root canal anatomy may lead to unsuccessful endodontic treatment. Case Report: This case report describes the successful endodontic treatment of the maxillary central incisor with unusual anatomy of two roots and two root canals. A 23-year-old male patient was referred for dental consultation with discoloration of the maxillary right central incisor with periapical les...

  19. Incisive papilla and positions of maxillary anterior teeth among ...

    African Journals Online (AJOL)

    Results: One hundred and twelve maxillary casts generated from participants aged 18-35 years (mean age 22.39±2.00 years), with well aligned arches were studied. The maxillary central incisor exhibited a mean of 14.93±1.52mm from the posterior limit of the incisive papilla while the inter-canine line scored a mean of ...

  20. Unusal canal configuration in maxillary and mandibular second molars

    Directory of Open Access Journals (Sweden)

    Ramachandran Ragunathan

    2016-01-01

    Full Text Available This clinical article describes three different case reports of maxillary and mandibular second molars with the unusual anatomy of single root with a single canal and their endodontic management. An unusual case of bilateralism is observed in the first two cases in the form of single-rooted second mandibular molars in both the quadrant of the same patient. The presence of maxillary second molar with single root and single canal in the third case is unusual.

  1. A histological and micro-CT investigation in to the effect of NGF and EGF on the periodontal, alveolar bone, root and pulpal healing of replanted molars in a rat model - a pilot study.

    Science.gov (United States)

    Furfaro, Francesco; Ang, Estabelle S M; Lareu, Ricky R; Murray, Kevin; Goonewardene, Mithran

    2014-01-06

    This study aims to investigate, utilising micro-computed tomography (micro-CT) and histology, whether the topical application of nerve growth factor (NGF) and/or epidermal growth factor (EGF) can enhance periodontal, alveolar bone, root and pulpal tissue regeneration while minimising the risk of pulpal necrosis, root resorption and ankylosis of replanted molars in a rat model. Twelve four-week-old male Sprague-Dawley rats were divided into four groups: sham, collagen, EGF and NGF. The maxillary right first molar was elevated and replanted with or without a collagen membrane impregnated with either the growth factors EGF or NGF, or a saline solution. Four weeks after replantation, the animals were sacrificed and the posterior maxilla was assessed using histological and micro-CT analysis. The maxillary left first molar served as the control for the corresponding right first molar. Micro-CT analysis revealed a tendency for all replanted molars to have reduced root length, root volume, alveolar bone height and inter-radicular alveolar bone volume. It appears that the use of the collagen membrane had a negative effect while no positive effect was noted with the incorporation of EGF or NGF. Histologically, the incorporation of the collagen membrane was found to negatively affect pulpal, root, periodontal and alveolar bone healing with pulpal inflammation and hard tissue formation, extensive root resorption and alveolar bone fragmentation. The incorporation of EGF and NGF did not improve root, periodontal or alveolar bone healing. However, EGF was found to improve pulp vascularisation while NGF-improved pulpal architecture and cell organisation, although not to the level of the control group. Results indicate a possible benefit on pulpal vascularisation and pulpal cell organisation following the incorporation of EGF and NGF, respectively, into the alveolar socket of replanted molars in the rat model. No potential benefit of EGF and NGF was detected in periodontal or root

  2. Bose enhancement and the ridge

    Energy Technology Data Exchange (ETDEWEB)

    Altinoluk, Tolga [Departamento de Física de Partículas and IGFAE, Universidade de Santiago de Compostela, 15706 Santiago de Compostela, Galicia (Spain); Armesto, Néstor, E-mail: nestor.armesto@usc.es [Departamento de Física de Partículas and IGFAE, Universidade de Santiago de Compostela, 15706 Santiago de Compostela, Galicia (Spain); Beuf, Guillaume [Department of Physics, Ben-Gurion University of the Negev, Beer Sheva 84105 (Israel); Kovner, Alex [Physics Department, University of Connecticut, 2152 Hillside Road, Storrs, CT 06269-3046 (United States); Lublinsky, Michael [Department of Physics, Ben-Gurion University of the Negev, Beer Sheva 84105 (Israel)

    2015-12-17

    We point out that Bose enhancement in a hadronic wave function generically leads to correlations between produced particles. We show explicitly, by calculating the projectile density matrix in the Color Glass Condensate approach to high-energy hadronic collisions, that the Bose enhancement of gluons in the projectile leads to azimuthal collimation of long range rapidity correlations of the produced particles, the so-called ridge correlations.

  3. Bose enhancement and the ridge

    Directory of Open Access Journals (Sweden)

    Tolga Altinoluk

    2015-12-01

    Full Text Available We point out that Bose enhancement in a hadronic wave function generically leads to correlations between produced particles. We show explicitly, by calculating the projectile density matrix in the Color Glass Condensate approach to high-energy hadronic collisions, that the Bose enhancement of gluons in the projectile leads to azimuthal collimation of long range rapidity correlations of the produced particles, the so-called ridge correlations.

  4. Oak Ridge National Laboratory Review

    Energy Technology Data Exchange (ETDEWEB)

    Krause, C.; Pearce, J.; Zucker, A. (eds.)

    1992-01-01

    This report presents brief descriptions of the following programs at Oak Ridge National Laboratory: The effects of pollution and climate change on forests; automation to improve the safety and efficiency of rearming battle tanks; new technologies for DNA sequencing; ORNL probes the human genome; ORNL as a supercomputer research center; paving the way to superconcrete made with polystyrene; a new look at supercritical water used in waste treatment; and small mammals as environmental monitors.

  5. Does Andrews facial analysis predict esthetic sagittal maxillary position?

    Science.gov (United States)

    Resnick, Cory M; Daniels, Kimberly M; Vlahos, Maryann

    2018-04-01

    Cephalometric analyses have limited utility in planning maxillary sagittal position for orthognathic surgery. In Six Elements of Orofacial Harmony, Andrews quantified maxillary position relative to forehead projection and angulation and proposed an ideal relationship. The purpose of this study was to investigate the ability of this technique to predict esthetic sagittal maxillary position. Survey study including a male and female with straight facial profiles, normal maxillary incisor angulations, and Angle's Class I. Maxillary position was modified on lateral photographs to create 5 images for each participant with incisor-goal anterior limit line (GALL) distances of -4, -2, 0, +2, and +4 mm. A series of health care professionals and laypeople were asked to rate each photo in order of attractiveness. A total of 100 complete responses were received. Incisor-GALL distances of +4 mm (41%) and +2 mm (40%) were most commonly considered "most esthetic" for the female volunteer (P < .001). For the male volunteer, there were 2 peak "most esthetic" responses: incisor-GALL distances of 0 mm (37%) and -4 mm (32%) (P < .001). Respondents considered maxillary incisor position 2 to 4 mm anterior to GALL most attractive in a woman and 0 to 4 mm posterior to GALL most esthetic in a man. Using these modified target distances, this analysis may be useful for orthognathic surgery planning. Copyright © 2018 Elsevier Inc. All rights reserved.

  6. The radiographic localization of unerupted maxillary incisors and supernumeraries

    International Nuclear Information System (INIS)

    Kim, Jae Duk; Lee, Chang Yul; You, Choong Hyun

    2003-01-01

    To evaluate the use of the vertical tube shift from a panoramic film and a periapical film to localize unerupted maxillary incisors and supernumeraries. The total of 103 displaced maxillary incisors or embedded supernumeraries were examined in this study. The vertical tube shift technique with panoramic and periapical radiography by normal projection taken and compared to localize the position of the embedded maxillary incisors or supernumeraries by a radiologist and 5 general dentists. The gold standard used for the radiographic comparisons was the true position of the embedded tooth as confirmed by horizontal tube shift technique using three periapical radiographs. The general dentist examiners were instructed on the use of the modified acronym 'SLDOBU' by the radiologist as it pertains to panoramic radiographs as the principle of vertical tube shift. All of the embedded maxillary incisors and supernumeraries were successfully located using the vertical tube shift from a panoramic and a maxillary anterior periapical radiograph by the radiologist and 5 general dentists. The use of a panoramic film with a periapical film combination for a vertical tube shift can be useful to localize unerupted maxillary incisors and supernumeraries.

  7. Proteomic Analysis of Gingival Tissue and Alveolar Bone during Alveolar Bone Healing*

    OpenAIRE

    Yang, Hee-Young; Kwon, Joseph; Kook, Min-Suk; Kang, Seong Soo; Kim, Se Eun; Sohn, Sungoh; Jung, Seunggon; Kwon, Sang-Oh; Kim, Hyung-Seok; Lee, Jae Hyuk; Lee, Tae-Hoon

    2013-01-01

    Bone tissue regeneration is orchestrated by the surrounding supporting tissues and involves the build-up of osteogenic cells, which orchestrate remodeling/healing through the expression of numerous mediators and signaling molecules. Periodontal regeneration models have proven useful for studying the interaction and communication between alveolar bone and supporting soft tissue. We applied a quantitative proteomic approach to analyze and compare proteins with altered expression in gingival sof...

  8. Comparison of maxillary stability after Le Fort I osteotomy for occlusal cant correction surgery and maxillary advanced surgery.

    Science.gov (United States)

    Ueki, Koichiro; Hashiba, Yukari; Marukawa, Kohei; Yoshida, Kan; Shimizu, Chika; Nakagawa, Kiyomasa; Yamamoto, Etsuhide

    2007-07-01

    To compare postoperative maxillary stability following Le Fort I osteotomy for the correction of occlusal cant as compared with conventional Le Fort I osteotomy for maxillary advancement. The subjects were 40 Japanese adults with jaw deformities. Of these, 20 underwent a Le Fort I osteotomy and intraoral vertical ramus osteotomy (IVRO) to correct asymmetric skeletal morphology and inclined occlusal cant. The other 20 patients underwent a Le Fort I osteotomy and sagittal split ramus osteotomy (SSRO) to advance the maxilla. Lateral and posteroanterior cephalograms were taken postoperatively and assessed statistically. Thereafter, the 2 groups were followed for time-course changes. There was no significant difference between the 2 groups with regard to time-course changes during the immediate postoperative period. This suggests that maxillary stability after Le Fort I osteotomy for cant correction does not differ from that after Le Fort I osteotomy for maxillary advancement.

  9. Histologic Evaluation of Wound Healing After Ridge Preservation With Cortical, Cancellous, and Combined Cortico-Cancellous Freeze-Dried Bone Allograft: A Randomized Controlled Clinical Trial.

    Science.gov (United States)

    Demetter, Randy S; Calahan, Blaine G; Mealey, Brian L

    2017-09-01

    Cortical and cancellous mineralized freeze-dried bone allografts (FDBA) are available for use in alveolar ridge preservation after tooth extraction. There are currently no data regarding use of a combination 50%/50% cortico-cancellous FDBA compared with a 100% cortical or 100% cancellous FDBA in ridge preservation. The primary objective of this study is to dimensionally and histologically evaluate healing after ridge preservation in non-molar sites using 50%/50% cortico-cancellous FDBA versus 100% cortical and 100% cancellous FDBA. Sixty-six patients requiring extraction of a non-molar tooth were enrolled and randomized into three groups to receive ridge preservation with the following: 1) 100% cortical FDBA; 2) 100% cancellous FDBA; or 3) 50%/50% cortico-cancellous FDBA. After 18 to 20 weeks of healing, a biopsy was harvested, and an implant was placed. The alveolar ridge was measured pre- and postoperatively to evaluate change in ridge height and width. Percentages of vital bone, residual graft, and connective tissue (CT)/other were determined via histomorphometric analysis. Histomorphometric analysis revealed no significant differences among groups regarding percentage of vital bone or CT/other. The 100% cortical FDBA group had significantly greater residual graft material (P = 0.04). Dimensional analysis revealed no significant between-group differences in any parameter measured. To the best knowledge of the authors, this study offers the first histologic evidence demonstrating no significant difference in vital bone formation or dimensional changes among 50%/50% cortico-cancellous FDBA, 100% cortical FDBA, and 100% cancellous FDBA when used in ridge preservation of non-molar tooth sites.

  10. The effect of patient age on bone formation using a fully synthetic nanocrystalline bone augmentation material in maxillary sinus grafting.

    Science.gov (United States)

    Wolf, Michael; Wurm, Alexander; Heinemann, Friedhelm; Gerber, Thomas; Reichert, Christoph; Jäger, Andreas; Götz, Werner

    2014-01-01

    Maxillary sinus floor augmentation is a treatment that has been proposed for patients in whom the alveolar bone height is insufficient. This procedure is commonly used in patients aged 40 to 70 years and older. However, little information exists whether the factor of age might influence the outcome of augmentation procedures. The aim of this study was to investigate whether the patient's age has an effect on bone formation and incorporation in maxillary sinus floor augmentation procedures. A fully synthetic nanocrystalline bone augmentation material (NanoBone, Artoss) was used for sinus floor augmentation in patients with a subantral vertical bone height of at least 3 mm and maximum of 7 mm. After 7 months healing time, biopsy specimens were taken and were divided into two groups according to the patient's age. Exclusion criteria were poor general health (eg, severe renal/and or liver disease), history of a radiotherapy in the head region, chemotherapy at the time of surgical procedure, noncompensated diabetes mellitus, symptoms of a maxillary sinus disease, active periodontal or systemic diseases, smoking, and poor oral hygiene. Histologic analyses with hematoxylin-eosin stain were performed. Multinucleated osteoclast-like cells were identified by histochemical staining (tartrate-resistant acid phosphatase [TRAP]). Quantitative and age-dependent assessment of bone formation, residual bone grafting material, and soft tissue formation following sinus augmentation was performed using histomorphometric analysis and the Bonferroni adjustment of the Student t test. Twenty biopsy specimens from 17 patients were taken and divided into two groups according to age (group 1: 41 to 52 years; group 2: 66 to 71 years) containing 10 specimens each, which were analyzed in triplicate resulting in a total of 30 specimens per group. A regeneration process with varying amounts of newly formed bone surrounded by marrow-like tissue was present in all augmented regions. No signs of

  11. Preoperative radiotherapy of maxillary sinus cancer

    International Nuclear Information System (INIS)

    Kim, Jae Chul; Park, In Kyu

    1998-01-01

    This study was to evaluate the effectiveness of preoperative radiotherapy in maxillary sinus cancer. A retrospective analysis was done for 42 patients with maxillary sinus cancer who were treated with radiation with or without surgery from April 1986 to September 1996. There were 27 male and 15 female patients. Patients' age ranged from 24 to 75 years (median 56 years). Stage distribution showed 2 in T2, 19 in T3, and 21 in T4 lesions. The histologic type was squamous cell carcinoma in 38, undifferentiated carcinoma in 1, transitional cell carcinoma in 1, and adenoid cystic carcinoma in 2 patients, All patients were treated with radiation initially with a dosage range of 50.4-70.2 Gy (median 70.2 Gy) before further evaluation of remnant disease. Eleven patients were given induction chemotherapy (2 cycles of 5-fluorouracil and cisplatin) concurrently with radiotherapy. Six to eight weeks after radiotherapy with or without chemotherapy, computerized tomography (CT) of paranasal sinus was taken to evaluate remnant disease. If the CT finding showed remnant disease, a Caldwell-Luc procedure was done to get the specimen of suspicious lesions. A radical maxillectomy was done if the specimen was proven to contain malignancy. In contrast periodic follow-up examination was done without any radical surgery if the tissue showed only granulation tissue. Follow-up period ranged from 3 to 92 months with a median 16 months. Nine (21.4%) patients showed complete response (CR) and 33 patients (78.6%) showed persistent disease (PER) to initial radiotherapy. Among the 9 CR patients, 7 patients had no evidence of disease (NED), 1 patient had local failure, and 1 patient had regional failure. Among 33 PER patients, salvage total maxillectomy was done in 10 patients, and the surgery was not feasible or refused in 23 patients. Following the salvage radical surgery, 2 patients were NED and 8 patients were PER status. Overall and disease- free survival rate at 5 years was 23.1% and 16

  12. Preoperative radiotherapy of maxillary sinus cancer

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Chul; Park, In Kyu [College of Medicine, Kyungpook National Univ., Taegu (Korea, Republic of)

    1998-09-01

    This study was to evaluate the effectiveness of preoperative radiotherapy in maxillary sinus cancer. A retrospective analysis was done for 42 patients with maxillary sinus cancer who were treated with radiation with or without surgery from April 1986 to September 1996. There were 27 male and 15 female patients. Patients' age ranged from 24 to 75 years (median 56 years). Stage distribution showed 2 in T2, 19 in T3, and 21 in T4 lesions. The histologic type was squamous cell carcinoma in 38, undifferentiated carcinoma in 1, transitional cell carcinoma in 1, and adenoid cystic carcinoma in 2 patients, All patients were treated with radiation initially with a dosage range of 50.4-70.2 Gy (median 70.2 Gy) before further evaluation of remnant disease. Eleven patients were given induction chemotherapy (2 cycles of 5-fluorouracil and cisplatin) concurrently with radiotherapy. Six to eight weeks after radiotherapy with or without chemotherapy, computerized tomography (CT) of paranasal sinus was taken to evaluate remnant disease. If the CT finding showed remnant disease, a Caldwell-Luc procedure was done to get the specimen of suspicious lesions. A radical maxillectomy was done if the specimen was proven to contain malignancy. In contrast periodic follow-up examination was done without any radical surgery if the tissue showed only granulation tissue. Follow-up period ranged from 3 to 92 months with a median 16 months. Nine (21.4%) patients showed complete response (CR) and 33 patients (78.6%) showed persistent disease (PER) to initial radiotherapy. Among the 9 CR patients, 7 patients had no evidence of disease (NED), 1 patient had local failure, and 1 patient had regional failure. Among 33 PER patients, salvage total maxillectomy was done in 10 patients, and the surgery was not feasible or refused in 23 patients. Following the salvage radical surgery, 2 patients were NED and 8 patients were PER status. Overall and disease- free survival rate at 5 years was 23.1% and 16

  13. Maxillary sinus carcinoma: Natural history and outcome

    International Nuclear Information System (INIS)

    Al-Jhani, Ali S.; Nooh, Nasser S.; Al-Rajhi, Nasser M.; El-Sebaie, Medhat M.; Al-Amro, Abdullah S.; Mahasen, Ziyad Z.; Otieschan, Abdullah T.

    2004-01-01

    To assess natural history, treatment outcome and pattern of relapse in patients with maxillary sinus carcinoma. A review was conducted of the medical records of all adult patients with maxillary sinus carcinoma, who were treated at King Faisal Hospital and Research Centre, Riyadh, Kingdom of Saudi Arabia, between January 1990 and December 1999. A total of 60 patients were identified for analysis, 36 men and 24 women; the median age was 58-years (range 23-95). Major presenting symptoms were facial swelling 55%, facial pain 50%, and nasal obstruction 43.4%, with a median duration of 5-months (range 1-24). Histology was quamous cell carcinoma in 71.7% and adenoid cystic in 16.7%. They were restaged according to American Joint Committee on Cancer classification 1997 as II, III and IV in 1, 10 and 49. Thirty patients received treatment with curative intent (surgery in 4 patients, radiotherapy in 2, and combined modality in 24), 6 patients refused treatment and 24 were treated palliatively. With a median follow up of 50-months (range 2-128) in surviving patients treated with a curative intent, 12/30 failed locally, 4/30 in the regional neck nodes and 2/30 had systemic relapse. The actuarial 5-year overall survival (OS), relapse free survival (RFS) and local control rate (LC) were 55%, 39% and 51%. Treatment modality was the only significant prognostic factor for outcome, with 5 year OS, RFS and LC of 72%, 49% and 61%, for combined modality using surgery followed by radiotherapy compared to 0% for single approach (p=0.0003, p=0.0052 and p=0.0098). This study indicates that the majority of our patients presented with advanced disease, resulting in poor outcome to conventional treatment modalities. Efforts should be directed to minimize the delay in diagnosis at the primary care level. Combined modality treatment should be offered to all patients with locally advanced disease. New approaches such as neoadjuvant or concurrent chemoradiotherapy with or without surgery need to

  14. Perceptual Speech Assessment After Anterior Maxillary Distraction in Patients With Cleft Maxillary Hypoplasia.

    Science.gov (United States)

    Richardson, Sunil; Seelan, Nikkie S; Selvaraj, Dhivakar; Khandeparker, Rakshit V; Gnanamony, Sangeetha

    2016-06-01

    To assess speech outcomes after anterior maxillary distraction (AMD) in patients with cleft-related maxillary hypoplasia. Fifty-eight patients at least 10 years old with cleft-related maxillary hypoplasia were included in this study irrespective of gender, type of cleft lip and palate, and amount of required advancement. AMD was carried out in all patients using a tooth-borne palatal distractor by a single oral and maxillofacial surgeon. Perceptual speech assessment was performed by 2 speech language pathologists preoperatively, before placement of the distractor device, and 6 months postoperatively using the scoring system of Perkins et al (Plast Reconstr Surg 116:72, 2005); the system evaluates velopharyngeal insufficiency (VPI), resonance, nasal air emission, articulation errors, and intelligibility. The data obtained were tabulated and subjected to statistical analysis using Wilcoxon signed rank test. A P value less than .05 was considered significant. Eight patients were lost to follow-up. At 6-month follow-up, improvements of 62% (n = 31), 64% (n = 32), 50% (n = 25), 68% (n = 34), and 70% (n = 35) in VPI, resonance, nasal air emission, articulation, and intelligibility, respectively, were observed, with worsening of all parameters in 1 patient (2%). The results for all tested parameters were highly significant (P ≤ .001). AMD offers a substantial improvement in speech for all 5 parameters of perceptual speech assessment. Copyright © 2016 The American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  15. Variational Ridging in Sea Ice Models

    Science.gov (United States)

    Roberts, A.; Hunke, E. C.; Lipscomb, W. H.; Maslowski, W.; Kamal, S.

    2017-12-01

    This work presents the results of a new development to make basin-scale sea ice models aware of the shape, porosity and extent of individual ridges within the pack. We have derived an analytic solution for the Euler-Lagrange equation of individual ridges that accounts for non-conservative forces, and therefore the compressive strength of individual ridges. Because a region of the pack is simply a collection of paths of individual ridges, we are able to solve the Euler-Lagrange equation for a large-scale sea ice field also, and therefore the compressive strength of a region of the pack that explicitly accounts for the macro-porosity of ridged debris. We make a number of assumptions that have simplified the problem, such as treating sea ice as a granular material in ridges, and assuming that bending moments associated with ridging are perturbations around an isostatic state. Regardless of these simplifications, the ridge model is remarkably predictive of macro-porosity and ridge shape, and, because our equations are analytic, they do not require costly computations to solve the Euler-Lagrange equation of ridges on the large scale. The new ridge model is therefore applicable to large-scale sea ice models. We present results from this theoretical development, as well as plans to apply it to the Regional Arctic System Model and a community sea ice code. Most importantly, the new ridging model is particularly useful for pinpointing gaps in our observational record of sea ice ridges, and points to the need for improved measurements of the evolution of porosity of deformed ice in the Arctic and Antarctic. Such knowledge is not only useful for improving models, but also for improving estimates of sea ice volume derived from altimetric measurements of sea ice freeboard.

  16. A Radiologic Study of the Relationship of the Maxillary Sinus Floor and Apex of the Maxillary Molar

    International Nuclear Information System (INIS)

    Yoon, Hae Rym; Park, Chang Seo

    1998-01-01

    In this study, radiographic evaluation was made using panoramic radiography and cross-sectional tomography of SCANORA in male and female adults in their 20 s on the relationship between the maxillary sinus floor and the apex of the maxillary molar, to test the accuracy and effectiveness of the cross-sectional tomography, and to use this information in the assessment of preop, and postop, root canal treatment, apical surgery, extraction and implantology. Forty-one adults with an average age of 24.4 years were studied panoramic radiography and cross-sectional tomography. In panoramic view and cross-sectional view, the position of the apices of maxillary molars were classified as separated, contacted, or protruded type; the general shape of the maxillary sinus floor was evaluated horizontally and vertically from cross-sectional tomography. The accuracy of each radiography was tested using maxilla from 5 fresh cadavers from the Anatomy Lab at Yonsei University Dental College, and panoramic view and cross-sectional tomography were taken in the same condition as with the patients. The results were as follows ; 1. Panoramic view and cross-sectional view were taken in the maxilla specimen, and the actual distance between the maxillary sinus floor and the tooth apices were measured in the specimen; the median values of the distance from the tooth apices to the maxillary sinus floor in the panoramic view, cross-sectional view and in the accrual maxilla specimen were 2.83 mm, 4.51 mm, and 4.15 mm, respectively. In the cross-sectional view, the measured distance was close to the actual distance but in the panoramic view, the measured distance was far from the actual distance. 2. When the results of the panoramic view and cross-sectional view were compared, 40.5% of the results agreed with each other in the two radiographic methods and buccal roots of the 2nd molar were the closest to the maxillary sinus floor in the cross-sectional tomography.3. In cross-sectional view, when

  17. Hydroxyapatite paste Ostim, without elevation of full-thickness flaps, improves alveolar healing stimulating BMP- and VEGF-mediated signal pathways: an experimental study in humans.

    Science.gov (United States)

    Canuto, R A; Pol, R; Martinasso, G; Muzio, G; Gallesio, G; Mozzati, M

    2013-08-01

    Tooth extraction is considered as the starting point of jaw atrophy via osteoclast activity stimulation. The maintenance of dental alveolar bone depends on surgery procedure and use of materials to maintain prior space favoring bone regeneration. Among substitutes used in dentistry to fill bone defects, Ostim-Pastes (Ostim) is a nanocrystalline paste tested for treatment of severe clinical conditions. This research first investigated the effect of Ostim on alveolar healing, comparing in the same healthy subjects, an Ostim-filled socket with a not-filled one. Moreover, it also proposed a new surgical protocol for the post-extractive socket treatment using the graft materials without elevation of full-thickness flaps. Fourteen patients were enrolled to bilateral maxillary or mandibular extraction that was performed without elevation of full-thickness flaps. In each patient, one socket was filled using Ostim, and the other one was allowed to undergo natural healing. No suture was carried out. Clinical and biologic parameters were screened at 1, 7, and 14 days. Obtained results evidenced that nanocrystalline hydroxyapatite supports bone regeneration, increasing the synthesis of pro-osteogenic factors as bone morphogenetics protein (BMP)-4, BMP-7, alkaline phosphatase, and osteocalcin. Moreover, filling post-extractive socket with nanocrystalline hydroxyapatite paste leads to a complete epithelialization already at 7 days after extraction, despite the fact that the teeth were extracted without elevation of full-thickness flaps . The improved epithelialization is mediated by increased vascular endothelial growth factor (VEGF) expression. No significant change was observed in inflammatory parameters, with exception of an early and transient IL-1β induction, that could trigger and improve alveolar healing. Clinical and biomolecular observations of this explorative study evidenced that nanocrystalline hydroxyapatite improves alveolar socket healing, increasing angiogenesis

  18. Penetration of flomoxef into human maxillary and mandibular bones.

    Science.gov (United States)

    Igawa, H H; Sugihara, T; Yoshida, T; Kawashima, K; Ohura, T

    1995-09-01

    Penetration of flomoxef into the maxillary and mandibular bones was assayed clinically to provide data about its usefulness for the prevention of postoperative infection after maxillofacial surgery. Twenty-one patients undergoing maxillofacial surgery at our department were given flomoxef 2 g dissolved in 20 ml of physiological saline intravenously over 3 minutes during operation, and the serum, maxillary and mandibular concentrations were measured 1, 3, and 6 hours after injection by the band culture method using Escherichia coli 7437 as the indicator strain. The mean concentrations were 53.4, 16.1, and 2.6 micrograms/ml, respectively, in the serum, 17.6, 7.8, and 1.0 micrograms/g in maxillary bone, and 16.4, 4.2, and 0.9 micrograms/g in mandibular bone. The mean bone:serum ratios at 1, 3, and 6 hours were 33.0%, 48.2%, and 36.8%, respectively, for maxillary bone, and 30.7%, 26.2%, and 35.7% for mandibular bone. When compared with previously reported data on the bone:serum ratios in jaw of various other intravenous antibiotics, our results show that penetration of flomoxef into maxillary and mandibular bone is extremely high. As all the intramaxillary and intramandibular concentrations exceed its MIC80 values against clinical isolates of bacteria frequently isolated in cases of infection in the oral and maxillofacial region, it is apparent that one intravenous shot of flomoxef 2 g allows penetration of the drug into the maxillary and mandibular bones at effective concentrations. Flomoxef is therefore potentially useful for the prevention and treatment of infections in the oral and maxillofacial region, as it has excellent penetration into the maxillary and mandibular bones.

  19. Measurement of maxillary sinus volume using Computed Tomography

    International Nuclear Information System (INIS)

    Park, Chang Hee; Kim, Kee Deog; Park, Chang Seo

    2000-01-01

    To propose a standard value for the maxillary sinus volume of a normal Korean adult by measuring the width and height of the sinus and analyzing their correlation and the difference of the sinus size respectively between sexes, and on the right and left sides. Fifty-two (95 maxillary sinuses) out of 20 years or over aged patients who had taken CT in the Department of Dental Radiology, Yonsei University, Dental Hospital, between February 1997 and July 1999 who were no specific symptom, prominent bony septa, pathosis, clinical asymmetry and history of surgery in the maxillary sinus were retrospectively analyzed. The mean transverse width, antero-posterior width, height and volume of the normal Korean adult's maxillary sinuses were 28.33 mm, 39.69 mm, 46.60 mm and 21.90 cm 3 , respectively. There was a significant sex difference in the sinus volume (p<0.05). In the mean antero-posterior width, height and volume of the sinus, no significant difference was observed between both sides. All four measurements showed a significant correlation between both sides (p<0.0001). The widths and height of the sinus all showed a significant correlation with the sinus volume (p<0.0001). In the Korean normal adult's maxillary sinus, males tended to be larger than females. Except for the transverse width, all of the measurements showed no significant difference between the right and left side, but significant correlations in the four measurements between both sides were observed. Thus, the overgrowth or undergrowth in the unilateral maxillary sinus may suggest a certain pathosis or developmental abnormalities in the maxillary sinus.

  20. Alveolar cleft closure with iliac bone graft: A case report.

    Directory of Open Access Journals (Sweden)

    Tichvy Tammama

    2017-04-01

    Conclusion: The timing of alveolar bone grafting usually associated with the state of the developing of dentition. Post operative management is important to get a good result, and to prevent any complications.

  1. Prevention of alveolar osteitis after third molar surgery: Comparative ...

    African Journals Online (AJOL)

    Prevention of alveolar osteitis after third molar surgery: Comparative study of the ... for surgical extraction of lower third molar were prospectively, consecutively, and ... Information on demographic, types and level of impaction, indications for ...

  2. Omphalocele and alveolar capillary dysplasia: a new association.

    NARCIS (Netherlands)

    Gerrits, L.C.; Mol, A.C. de; Bulten, J.; Staak, F.H.J.M. van der; Heijst, A.F.J. van

    2010-01-01

    OBJECTIVE: First report of an infant with coexistent omphalocele and alveolar capillary dysplasia. DESIGN: Descriptive case report. SETTING: Neonatal intensive care unit of a tertiary care children's hospital. PATIENT: We describe a term infant with omphalocele and respiratory insufficiency

  3. Alveolar lymphangioma in infants: report of two cases.

    LENUS (Irish Health Repository)

    FitzGerald, Kirsten

    2012-02-01

    The alveolar lymphangioma is a benign but relatively rare condition found only in the oral cavities of black infants. Dentists practising in Ireland may be unaware of this condition due to its racial specificity. This paper presents two case reports of multiple alveolar lymphangiomas found in black infants in a children\\'s hospital in Ireland. The epidemiology, aetiology, clinical presentation, histology, and management options are discussed. The photographs should aid the practitioner in recognising these lesions.

  4. Alveolar lymphangioma in infants: report of two cases.

    LENUS (Irish Health Repository)

    FitzGerald, Kirsten

    2009-06-01

    The alveolar lymphangioma is a benign but relatively rare condition found only in the oral cavities of black infants. Dentists practising in Ireland may be unaware of this condition due to its racial specificity. This paper presents two case reports of multiple alveolar lymphangiomas found in black infants in a children\\'s hospital in Ireland. The epidemiology, aetiology, clinical presentation, histology, and management options are discussed. The photographs should aid the practitioner in recognising these lesions.

  5. Dynamic thermal performance of alveolar brick construction system

    International Nuclear Information System (INIS)

    Gracia, A. de; Castell, A.; Medrano, M.; Cabeza, L.F.

    2011-01-01

    Highlights: → Even though U-value does not measure thermal inertia, it is the commonly used parameter. → The thermal performance analysis of buildings must include the evaluation of transient parameters. → Transient parameters of alveolar brick constructive system show good agreement with its low energy consumption. -- Abstract: Alveolar bricks are being introduced in building sector due to the simplicity of their construction system and to the elimination of the insulation material. Nevertheless, it is not clear if this new system is energetically efficient and which is its thermal behaviour. This paper presents an experimental and theoretical study to evaluate the thermal behaviour of the alveolar brick construction system, compared with a traditional Mediterranean brick system with insulation. The experimental study consists of measuring the thermal performance of four real house-like cubicles. The thermal transmittance in steady-state, also known as U-value, is calculated theoretically and experimentally for each cubicle, presenting the insulated cubicles as the best construction system, with differences around 45% in comparison to the alveolar one. On the other hand, experimental results show significantly smaller differences on the energy consumption between the alveolar and insulated construction systems during summer period (around 13% higher for the alveolar cubicle). These values demonstrate the high thermal efficiency of the alveolar system. In addition, the lack of agreement between the measured energy consumption and the calculated U-values, guides the authors to analyze the thermal inertia of the different building components. Therefore, several transient parameters, extracted from the heat transfer matrix and from experimental data, are also evaluated. It can be concluded that the alveolar brick construction system presents higher thermal inertia than the insulated one, justifying the low measured energy consumption.

  6. In Vitro Toxicity of Aluminum Nanoparticles in Rat Alveolar Macrophages

    Science.gov (United States)

    2006-03-01

    including intravenous, intramuscular , and subcutaneous injections, and including oral and ocular administration (Kreuter, 1991). NPs allow delivery of... NANOPARTICLES IN RAT ALVEOLAR MACROPHAGES THESIS Andrew J Wagner, 1st Lt, USAF AFIT/GES/ENV/06M-06 DEPARTMENT OF THE AIR FORCE AIR UNIVERSITY ORCE...TOXICITY OF ALUMINUM NANOPARTICLES IN RAT ALVEOLAR MACROPHAGES THESIS Presented to the Faculty Department of Systems and Engineering

  7. Soft tissue healing in alveolar socket preservation technique: histologic evaluations.

    Science.gov (United States)

    Pellegrini, Gaia; Rasperini, Giulio; Obot, Gregory; Farronato, Davide; Dellavia, Claudia

    2014-01-01

    After tooth extraction, 14 alveolar sockets were grafted with porous bovine bone mineral particles and covered with non-cross-linked collagen membrane (test group), and 14 alveolar sockets were left uncovered. At 5 and 12 weeks, microvascular density (MVD), collagen content, and amount of lymphocytes (Lym) T and B were analyzed in soft tissue. At 5 weeks, MVD was significantly lower and Lym T was significantly higher in tests than in controls (P healing process of the soft tissue.

  8. A basic review on the inferior alveolar nerve block techniques

    OpenAIRE

    Khalil, Hesham

    2014-01-01

    The inferior alveolar nerve block is the most common injection technique used in dentistry and many modifications of the conventional nerve block have been recently described in the literature. Selecting the best technique by the dentist or surgeon depends on many factors including the success rate and complications related to the selected technique. Dentists should be aware of the available current modifications of the inferior alveolar nerve block techniques in order to effectively choose b...

  9. Horizontal alveolar bone loss: A periodontal orphan

    Science.gov (United States)

    Jayakumar, A.; Rohini, S.; Naveen, A.; Haritha, A.; Reddy, Krishnanjeneya

    2010-01-01

    Background: Attempts to successfully regenerate lost alveolar bone have always been a clinician’s dream. Angular defects, at least, have a fairer chance, but the same cannot be said about horizontal bone loss. The purpose of the present study was to evaluate the prevalence of horizontal alveolar bone loss and vertical bone defects in periodontal patients; and later, to correlate it with the treatment modalities available in the literature for horizontal and vertical bone defects. Materials and Methods: The study was conducted in two parts. Part I was the radiographic evaluation of 150 orthopantomographs (OPGs) (of patients diagnosed with chronic periodontitis and seeking periodontal care), which were digitized and read using the AutoCAD 2006 software. All the periodontitis-affected teeth were categorized as teeth with vertical defects (if the defect angle was ≤45° and defect depth was ≥3 mm) or as having horizontal bone loss. Part II of the study comprised search of the literature on treatment modalities for horizontal and vertical bone loss in four selected periodontal journals. Results: Out of the 150 OPGs studied, 54 (36%) OPGs showed one or more vertical defects. Totally, 3,371 teeth were studied, out of which horizontal bone loss was found in 3,107 (92.2%) teeth, and vertical defects were found only in 264 (7.8%) of the teeth, which was statistically significant (P<.001). Search of the selected journals revealed 477 papers have addressed the treatment modalities for vertical and horizontal types of bone loss specifically. Out of the 477 papers, 461 (96.3%) have addressed vertical bone loss, and 18 (3.7%) have addressed treatment options for horizontal bone loss. Two papers have addressed both types of bone loss and are included in both categories. Conclusion: Horizontal bone loss is more prevalent than vertical bone loss but has been sidelined by researchers as very few papers have been published on the subject of regenerative treatment modalities for

  10. New fixation method for maxillary distraction osteogenesis using locking attachments.

    Science.gov (United States)

    Suzuki, Eduardo Yugo; Buranastidporn, Boonsiva; Ishii, Masatoshi

    2006-10-01

    The external traction hooks of the intraoral splint used in the rigid external distraction (RED) system for maxillary distraction osteogenesis interfere with the surgical procedures. The purpose of this study is to introduce an innovative splint fixation method for maxillary distraction osteogenesis with Locking Attachments and evaluate their advantages, such as reduction of operating time compared with the traditional intraoral splint method. Retrospective comparison of operative times of maxillary Le Fort I osteotomy procedures was carried out with the traditional protocol using the intraoral splint cemented to the maxillary dentition (n = 14), and a removable intraoral splint that is inserted postsurgically (n = 14). Operative procedure times were compared and analyzed statistically using the data extracted from the surgical records. There were no complications inserting the removable splint postsurgically, including pain, discomfort, or time-consuming procedure. Stable and secure splint fixation was obtained before the distraction procedure and the desired treatment goals were obtained in all patients. The total operative procedure times were significantly reduced in the Locking Attachments group by 24% to 41% (approximately 65 minutes) compared with earlier operations involving the conventional splints (P Maxillary distraction osteogenesis with the Locking Attachments is a highly effective fixation approach to manage severe hypoplastic maxilla, eliminating lip constraints resulting from scarring and allowing for easier, more deliberate and careful dissection. The use of the Locking Attachments is reliable in craniofacial surgery and has proved to be advantageous in the reduction of the operating time and surgical risks.

  11. Transnasal endoscopic medial maxillectomy in recurrent maxillary sinus inverted papilloma.

    Science.gov (United States)

    Kamel, Reda H; Abdel Fattah, Ahmed F; Awad, Ayman G

    2014-12-01

    Maxillary sinus inverted papilloma entails medial maxillectomy and is associated with high incidence of recurrence. To study the impact of prior surgery on recurrence rate after transnasal endoscopic medial maxillectomy. Eighteen patients with primary and 33 with recurrent maxillary sinus inverted papilloma underwent transnasal endoscopic medial maxillectomy. Caldwell-Luc operation was the primary surgery in 12 patients, transnasal endoscopic resection in 20, and midfacial degloving technique in one. The follow-up period ranged between 2 to 19.5 years with an average of 8.8 years. Recurrence was detected in 8/51 maxillary sinus inverted papilloma patients (15.7 %), 1/18 of primary cases (5.5 %), 7/33 of recurrent cases (21.2 %); 3/20 of the transnasal endoscopic resection group (15%) and 4/12 of the Caldwell-Luc group (33.3%). Redo transnasal endoscopic medial maxillectomy was followed by a single recurrence in the Caldwell-Luc group (25%), and no recurrence in the other groups. Recurrence is more common in recurrent maxillary sinus inverted papilloma than primary lesions. Recurrent maxillary sinus inverted papilloma after Caldwell-Luc operation has higher incidence of recurrence than after transnasal endoscopic resection.

  12. eRME - Rapid Maxillary Expansion in the economic way

    Directory of Open Access Journals (Sweden)

    Sonali Mahadevia

    2011-01-01

    Full Text Available Aim and Objectives: Rapid Maxillary Expansion constitutes a routine clinical procedure in orthodontics, involving separation of mid-palatine suture which is usually done with help of the Hyrax screw. However, because of its high cost, the use has been limited, especially in institutions. So, the purpose of this study was to construct an economical device which can expand the maxillary arch in growing patients. Materials and Methods: Six patients having constricted maxilla and posterior skeletal crossbite were randomly selected from the Department of Orthodontics. A unique, easy and simple alternative device for expanding the maxillary arch called economic Rapid Maxillary Expander (eRME has been fabricated at about one-tenth the cost of the conventional Hyrax. Pre- and post-treatment effects were statistically tested by using paired t-test at 0.05 level of significance. Results and Conclusion: The study results showed an average expansion in canine, premolar and molar regions of 4.4 mm, 6.8 mm and 9.4 mm, respectively, having significant difference pre-and post-treatment. Thus, it shows that maxillary expansion is efficiently possible with the application of this newly constructed device named eRME. This appliance also acts as a fixed retainer to avoid relapse, hence negating the need for a separate retainer.

  13. Endoscopic anatomy of the orbital floor and maxillary sinus.

    Science.gov (United States)

    Moore, Corey C; Bromwich, Matthew; Roth, Kathy; Matic, Damir B

    2008-01-01

    Endoscopic repair of orbital blow-out fractures could become a predictable and efficient treatment alternative to traditional methods. However, maxillary sinus endoscopy provides a complex and disorienting view of the orbital floor. To be a useful and consistent technique for providing access to the orbital floor, specific knowledge of maxillary endoscopic anatomy is required. The purpose of the study was to provide an anatomic description of the orbital floor via the endoscopic approach. Objectives include defining consistent landmarks for use in endoscopic repair of orbital floor fractures. Using 0- and 30-degree rigid endoscopes, 6 fresh cadavers (12 maxillary sinuses) were examined via a standard Caldwell-Luc approach. Computed tomographic scans, plastic molds, and digital images were used to compare observable averages within bony anatomy. Potential bony landmarks were correlated with soft-tissue anatomy in fresh specimens. The maxillary ostium, orbital floor, and lateral ethmoid air cells were visualized, and their structures were described. Observations were made in relation to the anatomy of the orbital floor and maxillary sinus, including fracture pattern and force transmission pathways. An "orbitomaxillary" sinus bony thickening was identified and described for the first time. This study provides the basis for further refinement of surgical technique and opens the door for future clinical trials using endoscopic repair.

  14. Unilateral maxillary molar distalization with zygoma-gear appliance.

    Science.gov (United States)

    Kilkis, Dogan; Bayram, Mehmet; Celikoglu, Mevlut; Nur, Metin

    2012-08-01

    The aim of this study was to present the orthodontic treatment of a 15-year-old boy with a unilateral maxillary molar distalization system, called the zygoma-gear appliance. It consisted of a zygomatic anchorage miniplate, an inner bow, and a Sentalloy closed coil spring (GAC International, Bohemia, NY). A distalizing force of 350 g was used during the distalization period. The unilateral Class II malocclusion was corrected in 5 months with the zygoma-gear appliance. The maxillary left first molar showed distalization of 4 mm with an inclination of 3°. The maxillary premolars moved distally with the help of the transseptal fibers. In addition, there were slight decreases in overjet (-0.5 mm) and maxillary incisor inclination (-1°), indicating no anchorage loss from the zygoma-gear appliance. Preadjusted fixed appliances (0.022 × 0.028-in, MBT system; 3M Unitek, Monrovia, Calif) were placed in both arches to achieve leveling and alignment. After 14 months of unilateral distalization with the zygoma-gear appliance and fixed appliances, Class I molar and canine relationships were established with satisfactory interdigitation of the posterior teeth. Acceptable overjet and overbite were also achieved. This article shows that this new system, the zygoma-gear appliance, can be used for unilateral maxillary molar distalization without anchorage loss. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  15. Proximal alveolar bone loss in a longitudinal radiographic investigation

    International Nuclear Information System (INIS)

    Lavstvedt, S.; Bolin, A.; Henrikson, C.O.

    1986-01-01

    Four hundred and six individuals from an unselected sample from the County of Stockholm aged 18 to 65 years in 1970 were examined radiographically in 1970 and 1980. The differences in proximal alveolar bone height were recorded, attention being paid to the divergences in projection between the two investigations. The mean of the alveolar bone differnce was 5.5% of the mean root length, which corresponds to an average annual bone loss of 0.09 mm. Ninety per cent of the individuals had a difference in alveolar bone height of less than 10% of the root length, that is an average bone loss of 1.6 mm or less during 10 years. By linear regression analysis it was shown that the difference in alveolar bone height is a function of the initial bone loss; that is, the greater the initial bone loss, the greater the alveolar bone loss during the 10-year period. The result of the regression analysis may facilitate predictions of alveolar bone loss

  16. [Fatal alveolar haemorrhage following a "bang" of cannabis].

    Science.gov (United States)

    Grassin, F; André, M; Rallec, B; Combes, E; Vinsonneau, U; Paleiron, N

    2011-09-01

    The new methods of cannabis consumption (home made water pipe or "bang") may be responsible for fatal respiratory complications. We present a case, with fatal outcome, of a man of 19 years with no previous history other than an addiction to cannabis using "bang". He was admitted to intensive care with acute dyspnoea. A CT scan showed bilateral, diffuse alveolar shadowing. He was anaemic with an Hb of 9.3g/l. Bronchoalveolar lavage revealed massive alveolar haemorrhage. Investigations for infection and immunological disorder were negative and toxicology was negative except for cannabis. Antibiotic treatment was given and favourable progress allowed early discharge. Death occurred 15 days later due to alveolar haemorrhage following a further "bang" of cannabis. Autopsy showed toxic alveolar haemorrhage. The probable mechanism is pulmonary damage due to acid anhydrides released by the incomplete combustion of cannabis in contact with plastic. These acids have a double effect on the lungs: a direct toxicity with severe inflammation of the mucosa leading to alveolar haemorrhage and subsequently the acid anhydrides may lead to the syndrome of intra-alveolar haemorrhage and anaemia described in occupational lung diseases by Herbert in Oxford in 1979. It manifests itself by haemoptysis and intravascular haemolysis. We draw attention to the extremely serious potential consequences of new methods of using cannabis, particularly the use of "bang" in homemade plastic materials. Copyright © 2011 SPLF. Published by Elsevier Masson SAS. All rights reserved.

  17. Antibiotics for acute maxillary sinusitis in adults.

    Science.gov (United States)

    Ahovuo-Saloranta, Anneli; Rautakorpi, Ulla-Maija; Borisenko, Oleg V; Liira, Helena; Williams, John W; Mäkelä, Marjukka

    2014-02-11

    Sinusitis is one of the most common diagnoses among adults in ambulatory care, accounting for 15% to 21% of all adult outpatient antibiotic prescriptions. However, the role of antibiotics for sinusitis is controversial. To assess the effects of antibiotics in adults with acute maxillary sinusitis by comparing antibiotics with placebo, antibiotics from different classes and the side effects of different treatments. We searched CENTRAL 2013, Issue 2, MEDLINE (1946 to March week 3, 2013), EMBASE (1974 to March 2013), SIGLE (OpenSIGLE, later OpenGrey (accessed 15 January 2013)), reference lists of the identified trials and systematic reviews of placebo-controlled studies. We also searched for ongoing trials via ClinicalTrials.gov and the WHO International Clinical Trials Registry Platform (ICTRP). We imposed no language or publication restrictions. Randomised controlled trials (RCTs) comparing antibiotics with placebo or antibiotics from different classes for acute maxillary sinusitis in adults. We included trials with clinically diagnosed acute sinusitis, confirmed or not by imaging or bacterial culture. Two review authors independently screened search results, extracted data and assessed trial quality. We calculated risk ratios (RRs) for differences between intervention and control groups in whether the treatment failed or not. All measures are presented with 95% confidence intervals (CIs). We conducted the meta-analyses using either the fixed-effect or random-effects model. In meta-analyses of the placebo-controlled studies, we combined data across antibiotic classes. Primary outcomes were clinical failure rates at 7 to 15 days and 16 to 60 days follow-up. We used GRADEpro to assess the quality of the evidence. We included 63 studies in this updated review; nine placebo-controlled studies involving 1915 participants (seven of the studies clearly conducted in primary care settings) and 54 studies comparing different classes of antibiotics (10 different comparisons

  18. Healing of extraction sockets and augmented alveolar defects following 1-year treatment with bisphosphonate.

    Science.gov (United States)

    Khojasteh, Arash; Behnia, Hossein; Morad, Golnaz; Dashti, Seyedeh Ghazaleh; Dehghan, Mohammad Mehdi; Shahab, Shahriyar; Abbas, Fatemeh Mashhadi

    2013-01-01

    To assess the effect of bisphosphonates on healing of extraction sockets and augmented alveolar defects, 12 adult female mongrel dogs were assigned to 2 experimental groups and a control group. The experimental groups received oral alendronate (ALN, 3.5 mg/kg/wk) or IV pamidronate (PAM, 1 mg/kg/wk) for 12 months. Animals were randomly tested for serum C-terminal telopeptide of collagen I (CTx). The right first and second premolars were extracted. After 8 weeks, extraction sites were evaluated for healing. Subsequently, 3-wall defects were created in ridges and filled with human mineralized cortical particulate bone. Two months post-augmentation, animals were sacrificed and mandibles were collected for cone-beam computed tomography (CBCT) and histomorphometric appraisal. The obtained data were compared using 1-way ANOVA test. CTx test results in both experimental groups were comparable (alveolar bone in the PAM group and the upper rim of the alveoli in the ALN group. Histologically, bone sequestra from the PAM group demonstrated empty osteocyte lacunae, while in the ALN group areas of necrotic bone along with evidence of active bone remodeling was distinguished. Eight weeks post-augmentation, the experimental groups showed no evidence of bone formation in the augmented area, while bone formation ratio was measured to be 18.32% in the control group. The mean amount of pixel intensity calculated from the CBCT images of the ALN, PAM, and control group was 113.69 ± 11.04, 124.94 ± 4.72, and 113.69 ± 6.63, respectively. Pixel intensity in PAM-treated group was significantly higher than both other groups. This study demonstrated that 1-year treatment with ALN/PAM was associated with impairment of post-extraction and post-augmentation bone healing in dogs.

  19. COURSE OF THE MAXILLARY ARTERY THROUGH THE LOOP OF THE AURICULOTEMPORAL NERVE. Recorrido de la arteria maxilar a través del bucle del nervio aurículotemporal

    Directory of Open Access Journals (Sweden)

    Kavya Bhat

    2016-03-01

    Full Text Available Las variaciones en el curso de la arteria maxilar se describen a menudo, con sus relaciones con el músculo pterigoideo lateral. En el presente caso informamos una variación exclusiva en el curso de la arteria maxilar que no fue publicada antes. En un cadáver masculino de 75 años arteria maxilar derecho estaba pasando por el bucle del nervio auriculo-temporal. La arteria meníngea media provenía de la arteria maxilar con un bucle del nervio auriculo-temporal. La arteria maxilar pasaba profunda con respecto al nervio dentario inferior pero superficial al nervio lingual. El conocimiento de estas variaciones es importante para el cirujano y también serviría para explicar la posible participación de estas variaciones en la etiología del dolor mandibular. Variations in the course of the maxillary artery are often described with its relations to the lateral pterygoid muscle. In the present case we report a unique variation in the course of the maxillary artery which was not reported before. In a 75 years old male cadaver the right maxillary artery passed through the loop of the auriculotemporal nerve. The middle meningeal artery was arising from the maxillary artery within the nerve loop of auriculotemporal nerve. Further the maxillary artery passed deep to the inferior alveolar nerve but superficial to the lingual nerve. The knowledge of these variations is important for surgeons and it would also explain the possible involvement of these variations in etiology of the craniomandibular pain.

  20. A clinical analysis of maxillary cancer

    Energy Technology Data Exchange (ETDEWEB)

    Ishida, Haruhiko; Amatsu, Mutsuo [Kobe Univ. (Japan). School of Medicine

    2001-03-01

    Forty-five patients with maxillary cancer were treated at Kobe University Hospital during the years 1990-1999. We analyzed 35 of there cases that had undergone curative treatment. They were classified by T the classification (UICC, 1997) as two cases with T1, seven with T2, eight with T3, and 18 with T4. The two patients with T1 were treated with radiation alone, and four of the other patients were treated with surgery alone. Eight patients were given irradiation, intra-arterial infusion chemotherapy, and curettage of necotic tumor (combined therapy group); 10 received preoperative intra-arterial infusion chemotherapy, irradiation, and maxillectomy or extended maxillectomy (preoperative treatment group), and 11 underwent extended surgery and postoperative chemotherapy and/or irradiation (postoperative treatment group). The five-year survival rates were 65.1% for all patients, 83.3% for T3 cases, and 41.6% for T4 cases. The five-year survival rates were 48.6% for the combined therapy group, 80% for the preoperative treatment group, and 54.6% for the postoperative treatment group. Although the four cases with T2 who underwent combined therapy all remained disease-free, all three cases with T3 and T4 died of the disease. On the other hand, six of the seven patients with T3 and T4 in the preoperative treatment group remained disease-free. Based on these results, we believe that maxillectomy or extended maxillectomy following intra-arterial chemotherapy and irradiation is the most effective treatment modality for T3 and T4 cases. (author)

  1. A clinical analysis of maxillary cancer

    International Nuclear Information System (INIS)

    Ishida, Haruhiko; Amatsu, Mutsuo

    2001-01-01

    Forty-five patients with maxillary cancer were treated at Kobe University Hospital during the years 1990-1999. We analyzed 35 of there cases that had undergone curative treatment. They were classified by T the classification (UICC, 1997) as two cases with T1, seven with T2, eight with T3, and 18 with T4. The two patients with T1 were treated with radiation alone, and four of the other patients were treated with surgery alone. Eight patients were given irradiation, intra-arterial infusion chemotherapy, and curettage of necotic tumor (combined therapy group); 10 received preoperative intra-arterial infusion chemotherapy, irradiation, and maxillectomy or extended maxillectomy (preoperative treatment group), and 11 underwent extended surgery and postoperative chemotherapy and/or irradiation (postoperative treatment group). The five-year survival rates were 65.1% for all patients, 83.3% for T3 cases, and 41.6% for T4 cases. The five-year survival rates were 48.6% for the combined therapy group, 80% for the preoperative treatment group, and 54.6% for the postoperative treatment group. Although the four cases with T2 who underwent combined therapy all remained disease-free, all three cases with T3 and T4 died of the disease. On the other hand, six of the seven patients with T3 and T4 in the preoperative treatment group remained disease-free. Based on these results, we believe that maxillectomy or extended maxillectomy following intra-arterial chemotherapy and irradiation is the most effective treatment modality for T3 and T4 cases. (author)

  2. Emergency preparedness at Oak Ridge National Laboratory, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    Skipper, M.N.

    1990-03-01

    Emergency preparedness for industry was commonly believed to be an essential responsibility on the part of management. Therefore, this study was conducted to research and accumulate information and data on emergency preparedness at Oak Ridge National Laboratory (ORNL). The objective of this study was to conduct a thorough evaluation of emergency preparedness knowledge among employees to determine if they were properly informed or if they needed more training. Also, this study was conducted to provide insight to management as to what their responsibility was concerning this training. To assess employee emergency preparedness knowledge, a questionnaire was developed and administered to 100 employees at ORNL. The data was analyzed using frequencies and percentages of response and was displayed through the use of graphs within the report. 22 refs., 22 figs

  3. Emergency preparedness at Oak Ridge National Laboratory, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    Skipper, M.N.

    1990-03-01

    Emergency preparedness for industry was commonly believed to be an essential responsibility on the part of management. Therefore, this study was conducted to research and accumulate information and data on emergency preparedness at Oak Ridge National Laboratory (ORNL). The objective of this study was to conduct a thorough evaluation of emergency preparedness knowledge among employees to determine if they were properly informed or if they needed more training. Also, this study was conducted to provide insight to management as to what their responsibility was concerning this training. To assess employee emergency preparedness knowledge, a questionnaire was developed and administered to 100 employees at ORNL. The data was analyzed using frequencies and percentages of response and was displayed through the use of graphs within the report. 22 refs., 22 figs.

  4. Evaluation the success of osseointegrated implants in maxillary sinus grafts

    Directory of Open Access Journals (Sweden)

    Rubens Eduardo Gigli

    2008-01-01

    Full Text Available Objective: To analyze implants placed in maxillary sinus grafts with biomaterial of bovine origin and platelet-rich plasma, observing bone neoformation and the clinical and histologic success rate presented.Methods: Analysis of the clinical findings was based on 36 maxillary sinus grafts with 101 implants placed in 30 patients with a mean age of 47 years, and the histologic analysis, based on nine samples of the 36 grafts performed, with a mean interval of 7.5 months time of the graft, the majority of patients being men with a mean age of 42 years. Results: Clinically, 91 implants placed were osseointegrated.Conclusion: Based on the results presented, it was concluded that when implants are placed in the maxillary sinus region grafted with biomaterial, they present a high success rate. ISRCTN24003246

  5. Pneumatisation of the maxillary sinus in normal and symptomatic children

    International Nuclear Information System (INIS)

    Odita, J.C.; Akamaguna, A.I.; Ugbodaga, C.I.; Ogisi, F.O.; Amu, O.D.

    1986-01-01

    The pattern of pneumatisation and normal width of the maxillary sinus in 191 Nigerian infants and children whose age range was 6 months to 14 years was determined. Fifty-four percent of children with no respiratory tract or sinus infection had opaque maxillary sinus. A figure of 44.5% was obtained amongst children with suspected bronchopneumonia. Only 41.5% of suspected cases of sinusitis, acute and chronic middle ear disease had opaque sinus. The highest rate of sinus opacity was seen in children under 2 years who were asymptomatic. The mean maximal width of normally aerated sinus was 8.74 mm for children under 2 years, 16.5 mm for 3-6 years, 21.5 mm for 7-11 years and 25 mm for children 12 years and above. We conclude that maxillary sinus opacity in our experience is an unreliable index for the diagnosis of sinusitis in children. (orig.)

  6. Management of unerupted maxillary deciduous central incisor: a case report.

    Science.gov (United States)

    Shakra, Karam Abu

    2014-01-01

    Failure of eruption of primary teeth can be considered rare, especially in maxillary anterior teeth. The problem can be either mechanical obstruction of eruption or a failure of the eruption mechanism. This case report presents failure of eruption of the maxillary right deciduous central incisor in a 4-year-old girl. The unerupted primary tooth was removed surgically. The histological finding revealed fibroma with reactive giant cells. Periodic follow-up visits were advised to monitor the developing dentition and to ensure enough space for the permanent incisor. How to cite this article: Shakra KA. Management of Unerupted Maxillary Deciduous Central Incisor: A Case Report. Int J Clin Pediatr Dent 2014;7(1):58-60.

  7. Modeling Alveolar Epithelial Cell Behavior In Spatially Designed Hydrogel Microenvironments

    Science.gov (United States)

    Lewis, Katherine Jean Reeder

    The alveolar epithelium consists of two cell phenotypes, elongated alveolar type I cells (AT1) and rounded alveolar type II cells (ATII), and exists in a complex three-dimensional environment as a polarized cell layer attached to a thin basement membrane and enclosing a roughly spherical lumen. Closely surrounding the alveolar cysts are capillary endothelial cells as well as interstitial pulmonary fibroblasts. Many factors are thought to influence alveolar epithelial cell differentiation during lung development and wound repair, including physical and biochemical signals from the extracellular matrix (ECM), and paracrine signals from the surrounding mesenchyme. In particular, disrupted signaling between the alveolar epithelium and local fibroblasts has been implicated in the progression of several pulmonary diseases. However, given the complexity of alveolar tissue architecture and the multitude of signaling pathways involved, designing appropriate experimental platforms for this biological system has been difficult. In order to isolate key factors regulating cellular behavior, the researcher ideally should have control over biophysical properties of the ECM, as well as the ability to organize multiple cell types within the scaffold. This thesis aimed to develop a 3D synthetic hydrogel platform to control alveolar epithelial cyst formation, which could then be used to explore how extracellular cues influence cell behavior in a tissue-relevant cellular arrangement. To accomplish this, a poly(ethylene glycol) (PEG) hydrogel network containing enzymatically-degradable crosslinks and bioadhesive pendant peptides was employed as a base material for encapsulating primary alveolar epithelial cells. First, an array of microwells of various cross-sectional shapes was photopatterned into a PEG gel containing photo-labile crosslinks, and primary ATII cells were seeded into the wells to examine the role of geometric confinement on differentiation and multicellular arrangement

  8. Metallogenesis along the Indian Ocean Ridge System

    Digital Repository Service at National Institute of Oceanography (India)

    Banerjee, R.; Ray, Dwijesh

    including India. Among these studies majority were concentrated around the Central Indian Ridge and the Southwest Indian Ridge areas, while a few observations were made around the rest of the areas in the IORS. The findings of these studies are discussed...

  9. Sex Determination from Fingerprint Ridge Density | Gungadin ...

    African Journals Online (AJOL)

    This study was conducted with an aim to establish a relationship between sex and fingerprint ridge density. The fingerprints were taken from 500 subjects (250 males and 250 females) in the age group of 18-60 years. After taking fingerprints, the ridges were counted in the upper portion of the radial border of each print for all ...

  10. The influence of Aloe vera and xenograft XCB toward of bone morpho protein 2 BMP2 expression and amount of osteoblast of alveolar bone induced into tooth extraction sockets Cavia cobaya

    Directory of Open Access Journals (Sweden)

    Utari Kresnoadi

    2014-12-01

    Full Text Available Tooth extraction can cause inflammation leading to alveolar ridge resorption. In addition, prominent ridge has crucial role for making denture su-ccessfully. Thus, socket preservation is needed to prevent greater alveolar ridge resorption. An innovative material, a combination of Aloe vera and xe-nograft (XCB, is then considered as a biogenic stimulator that can reduce inflammation, as a result, the growth of alveolar bone is expected to be impro-ved. This research is aimed to prove whether the mixture of Aloe vera and xenograft can stimulate BMP2 and increase osteoblasts. Forty-eight Cavia co-baya animals were divided into eight groups each of which consisted of six animals. The mandibular incisors of those Cavia cobaya animals were then extracted and filled with PEG as Group Control, XCB as Group XCB, Aloe vera as Group Aloe vera, and a combination of Aloe vera +XCB as Group Aloe vera +XCB. Next, the first four groups were sacrificed seven days after extraction, and the second four groups were sacrificed 30 days after extrac-tion. And then, immunohistochemical and histopathology examinations were conducted to examine BMP2 expression and osteoblasts. Based on the re-sult known that the mixture of Aloe vera and xenograft can increase BMP2 expression and amount of osteoblasts. It can be concluded that the mixture of Aloe vera and xenograft can increase BMP2 expression and amount of osteoblast cel . It can be used as an alternative material to increase the growth of alveolar bone after extraction.

  11. Maxillary sinus augmentation by crestal access: a retrospective study on cavity size and outcome correlation.

    Science.gov (United States)

    Spinato, Sergio; Bernardello, Fabio; Galindo-Moreno, Pablo; Zaffe, Davide

    2015-12-01

    Cone-beam computed tomography (CBCT) and radiographic outcomes of crestal sinus elevation, performed using mineralized human bone allograft, were analyzed to correlate results with maxillary sinus size. A total of 60 sinus augmentations in 60 patients, with initial bone ≤5 mm, were performed. Digital radiographs were taken at surgical implant placement time up to post-prosthetic loading follow-up (12-72 months), when CBCT evaluation was carried out. Marginal bone loss (MBL) was radiographically analyzed at 6 months and follow-up time post-loading. Sinus size (BPD), implant distance from palatal (PID) and buccal wall (BID), and absence of bone coverage of implant (intra-sinus bone loss--IBL) were evaluated and statistically evaluated by ANOVA and linear regression analyses. MBL increased as a function of time. MBL at final follow-up was statistically associated with MBL at 6 months. A statistically significant correlation of IBL with wall distance and of IBL/mm with time was identified with greater values in wide sinuses (WS ≥ 13.27 mm) than in narrow sinuses (NS < 13.27 mm). This study is the first quantitative and statistically significant confirmation that crestal technique with residual ridge height <5 mm is more appropriate and predictable, in terms of intra-sinus bone coverage, in narrow than in WS. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  12. Transpalatal distraction for the management of maxillary constriction in pediatric patients

    OpenAIRE

    Adolphs, Nicolai; Ernst, Nicole; Hoffmeister, Bodo; Raguse, Jan-Dirk

    2015-01-01

    Context: The management of severe maxillary constriction can be challenging. For that purpose surgically assisted maxillary expansion by transpalatal distraction (TPD) can typically be recommended after skeletal maturity. However in selected cases bone borne transpalatal distraction devices can contribute to improve maxillary constriction considerably earlier already during mixed dentition. Aims: To assess the possibility of bone borne transpalatal distraction in pediatric patients. Settings ...

  13. Trans-sinusal maxillary distraction for correction of midfacial hypoplasia: long-term clinical results.

    NARCIS (Netherlands)

    Nadjmi, N.; Schutyser, F.A.C.; Erum, R. van

    2006-01-01

    Maxillary distraction osteogenesis is indicated in severe angle class III malocclusions, and severe maxillary hypoplasia among some cleft patients and other craniofacial deformities. Twenty patients, aged 8-48 years (mean 17.8+/-10.5 SD) with maxillary and midfacial hypoplasia were treated. The

  14. Ridge interaction features of the Line Islands

    Science.gov (United States)

    Konter, J. G.; Koppers, A. A. P.; Storm, L. P.

    2016-12-01

    The sections of Pacific absolute plate motion history that precede the Hawaii-Emperor and Louisville chains are based on three chains: the Line Islands-Mid-Pacific Mountains, the Hess Rise-Shatsky Rise, and the Marshall Islands-Wake Islands (Rurutu hotspot). Although it has been clear that the Line Islands do not define a simple age progression (e.g. Schlanger et al., 1984), the apparent similarity to the Emperor Seamount geographic trend has been used to extend the overall Hawaii-Emperor track further into the past. However, we show here that plate tectonic reconstructions suggest that the Mid-Pacific Mountains (MPMs) and Line Islands (LIs) were erupted near a mid-ocean ridge, and thus these structures do not reflect absolute plate motion. Moverover, the morphology and geochemistry of the volcanoes show similarities with Pukapuka Ridge (e.g. Davis et al., 2002) and the Rano Rahi seamounts, presumed to have a shallow origin. Modern 40Ar/39Ar ages show that the LIs erupted at various times along the entire volcanic chain. The oldest structures formed within 10 Ma of plate formation. Given the short distance to the ridge system, large aseismic volcanic ridges, such as Necker Ridge and Horizon Guyot may simply reflect a connection between MPMs and the ridge, similar to the Pukapuka Ridge. The Line Islands to the south (including Karin Ridge) define short subchains of elongated seamounts that are widespread, resembling the Rano Rahi seamount field. During this time, the plate moved nearly parallel to the ridge system. The change from few large ridges to many subchains may reflect a change in absolute plate motion, similar to the Rano Rahi field. Here, significant MPMs volcanism is no longer connected to the ridge along plate motion. Similar to Pukapuka vs. Rano Rahi, the difference in direction between plate motion and the closest ridge determines whether larger ridges or smaller seamount subchains are formed. The difference between the largest structures (MPMs and LIs

  15. Effective Maxillary Protraction with Tandem Traction Bow Appliance

    Directory of Open Access Journals (Sweden)

    Pravin Kumar S Marure

    2014-01-01

    Full Text Available Tandem traction bow appliance (TTBA promotes patient compliance, because it is more esthetic and comfortable than extraoral appliances. TTBA should be used only in case where maxillary deficiency and normal mandible is present. Advantages of it includes good oral hygiene, early treatment of any Class III malocclusion, optimal retention, distribution of the forces for protraction to all maxillary teeth, free mandibular movement. It can be used in conjunction with fixed appliances if necessary. This paper includes two case reports. The treatment results in both the cases demonstrated significant skeletal and dental response to TTBA therapy. Skeletal change was primarily a result of anterior movement of the maxilla.

  16. Uncontrolled Epistaxis Secondary to Traumatic Pseudoaneurysm of the Maxillary Artery

    Directory of Open Access Journals (Sweden)

    Eelam Adil

    2011-01-01

    Full Text Available We describe a rare case of traumatic pseudoaneurysm of the maxillary artery following a fall. The patient presented with epistaxis that could not be controlled with anterior and posterior nasal packing. She was urgently taken to the angiography suite for evaluation and ultimately underwent embolization of a left maxillary artery pseudoaneurysm with 500–700 micron Contour PVA followed by coiling with two 3 mm Tornado coils. Bleeding subsided after embolization, and the patient suffered no neurologic sequelae.

  17. CT scan for the diagnosis of maxillary sinus carcinoma

    International Nuclear Information System (INIS)

    Kimura, Yo; Kato, Isao; Aoyagi, Masaru; Kikuchi, Akira; Koike, Yoshio; Suzuki, Hachiro.

    1984-01-01

    A comparative study between the conventional radiological examination and the computed tomographical examination for the diagnosis of maxillary sinus carcinoma was done. CT scan has been more appreciated to detect the tumor invasion in the pterygopalatine fossa, orbit, posterior ethmoid sinus and skull base than the conventional examination. CT scan was most usefull for the determination of size and location of the tumor. The prognosis by the stage-grouping was significantly separated by the new classification with CT scan. Therefore, new TNM classification of maxillary sinus carcinoma with CT scan should be taken into account. (author)

  18. Orthodontic treatment of a complete transposed impacted maxillary canine

    Directory of Open Access Journals (Sweden)

    Pi-Huei Liu

    2015-03-01

    Full Text Available Tooth transposition is a positional interchange of two adjacent teeth. Transposition most often occurs at maxillary canine. Moving transposed teeth to their normal positions is challenging because this requires bodily movement and translation of one tooth to pass another. This procedure may cause damage to the teeth or supporting structures. We report a case of complete transposition of maxillary canine and lateral incisor. Transposed teeth were successfully moved orthodontically to their normal positions. Multiple mechanics were meticulously applied to achieve complete correction of the tooth positions and to minimize root resorption and/or periodontal defects of canine and lateral incisors. Factors concerning treatment planning for transposed teeth are discussed.

  19. Endodontic Management of a Maxillary Molar with Three Mesiobuccal Canals

    Directory of Open Access Journals (Sweden)

    Sirisha Gundam

    2014-01-01

    Full Text Available It is imperative that the clinician should have comprehensive knowledge about the normal anatomy and its variations of the teeth as the deviations from the usual are very common. An increased awareness of unusual anatomy and a better understanding of the root canal system guide the clinician in accurate diagnosis and treatment of such variations in order to achieve a successful endodontic outcome. The maxillary first molar has been shown to have a wide variation in respect to the number of canals specifically noted in the mesiobuccal root. The current case report shows the successful management of a maxillary molar in which the mesiobuccal root had three canals.

  20. Root Length and Anatomy of Impacted Maxillary Canines in Patients with Unilateral Maxillary Canine Impaction

    Directory of Open Access Journals (Sweden)

    Mostfa Shahabi

    2017-09-01

    Full Text Available Introduction: Canine impaction is a common occurrence. In this study, we sought to investigate the root anatomy and length of impacted canines and lateral incisor adjacent to impacted maxillary canine. Materials and Methods: In this retrospective study, three-dimensional tomographic imaging was performed on 26 patients with unilateral maxillary canine impaction. In this study, we evaluated root length and anatomy of impacted canines, in terms of resorption intensity and curvature, with Planmeca Romexis Viewer 4.0. Furthermore, crown shape as well as root length and anatomy of the lateral incisors adjacent to impacted canines were investigated and compared with the other side on the dental arch, where canine eruption was normal. Results: Root length of impacted canines was significantly lower than that of normal canines (P=0.011. There were no significant differences between root length of lateral incisors adjacent to impacted canines and root length of lateral incisors adjacent to normal canines (P=0.221. Moreover, the resorption intensity of the adjacent lateral incisors was higher than that of the impacted canines. No significant differences were noted in root resorption intensity between the lateral incisors adjacent to the imacted canines and the lateral incisors adjacent to normal canines (P=0.36. In addition, resorption intensity was significantly higher in impacted canines than in normal canines (P=0.024. Root anatomy of impacted canines was not significantly different from that of normal canines (P=0.055. The crown shape of the lateral incisors adjacent to impacted canines was not significantly different from that of the lateral incisors adjacent to normal canines (P=0.052. Conclusion: Impaction can probably affect root length and canine resorption severity. However, root and crown shape of lateral incisors cannot always be associated with canine impaction.

  1. Oak Ridge Reservation environmental report for 1991

    International Nuclear Information System (INIS)

    Mucke, P.C.

    1992-10-01

    The Oak Ridge Reservation Environmental Report for 1991 is the 21st in a series that began in 1971. The report documents the annual results of a comprehensive program to estimate the impact of the US Department of Energy (DOE) Oak Ridge operations upon human health and the environment. The report is organized into ten sections that address various aspects of effluent monitoring, environmental surveillance, dose assessment, waste management, and quality assurance. A compliance summary gives a synopsis of the status of each facility relative to applicable state and federal regulations. Data are included for the following: Oak Ridge Y-12 Plant; Oak Ridge National Laboratory (ORNL); and Oak Ridge K-25 Site. Effluent monitoring and environmental surveillance programs are intended to serve as effective indicators of contaminant releases and ambient contaminant concentrations that have the potential to result in adverse impacts to human health and the environment

  2. Partial pulmonary embolization disrupts alveolarization in fetal sheep

    Directory of Open Access Journals (Sweden)

    Hooper Stuart B

    2010-04-01

    Full Text Available Abstract Background Although bronchopulmonary dysplasia is closely associated with an arrest of alveolar development and pulmonary capillary dysplasia, it is unknown whether these two features are causally related. To investigate the relationship between pulmonary capillaries and alveolar formation, we partially embolized the pulmonary capillary bed. Methods Partial pulmonary embolization (PPE was induced in chronically catheterized fetal sheep by injection of microspheres into the left pulmonary artery for 1 day (1d PPE; 115d gestational age; GA or 5 days (5d PPE; 110-115d GA. Control fetuses received vehicle injections. Lung morphology, secondary septal crests, elastin, collagen, myofibroblast, PECAM1 and HIF1α abundance and localization were determined histologically. VEGF-A, Flk-1, PDGF-A and PDGF-Rα mRNA levels were measured using real-time PCR. Results At 130d GA (term ~147d, in embolized regions of the lung the percentage of lung occupied by tissue was increased from 29 ± 1% in controls to 35 ± 1% in 1d PPE and 44 ± 1% in 5d PPE fetuses (p VEGF and Flk-1, although a small increase in PDGF-Rα expression at 116d GA, from 1.00 ± 0.12 in control fetuses to 1.61 ± 0.18 in 5d PPE fetuses may account for impaired differentiation of alveolar myofibroblasts and alveolar development. Conclusions PPE impairs alveolarization without adverse systemic effects and is a novel model for investigating the role of pulmonary capillaries and alveolar myofibroblasts in alveolar formation.

  3. Asymmetric [14C]albumin transport across bullfrog alveolar epithelium

    International Nuclear Information System (INIS)

    Kim, K.J.; LeBon, T.R.; Shinbane, J.S.; Crandall, E.D.

    1985-01-01

    Bullfrog lungs were prepared as planar sheets and bathed with Ringer solution in Ussing chambers. In the presence of a constant electrical gradient (20, 0, or -20 mV) across the tissue, 14 C-labeled bovine serum albumin or inulin was instilled into the upstream reservoir and the rate of appearance of the tracer in the downstream reservoir was monitored. Two lungs from the same animal were used to determine any directional difference in tracer fluxes. An apparent permeability coefficient was estimated from a relationship between normalized downstream radioactivities and time. Results showed that the apparent permeability of albumin in the alveolar to pleural direction across the alveolar epithelial barrier is 2.3 X 10(-7) cm/s, significantly greater (P less than 0.0005) than that in the pleural to alveolar direction (5.3 X 10(-8) cm/s) when the tissue was short circuited. Permeability of inulin, on the other hand, did not show any directional dependence and averaged 3.1 X 10(-8) cm/s in both directions. There was no effect on radiotracer fluxes permeabilities of different electrical gradients across the tissue. Gel electrophoretograms and corresponding radiochromatograms suggest that the large and asymmetric isotope fluxes are not primarily due to digestion or degradation of labeled molecules. Inulin appears to traverse the alveolar epithelial barrier by simple diffusion through hydrated paracellular pathways. On the other hand, [ 14 C]albumin crosses the alveolar epithelium more rapidly than would be expected by simple diffusion. These asymmetric and large tracer fluxes suggest that a specialized mechanism is present in alveolar epithelium that may be capable of helping to remove albumin from the alveolar space

  4. Ligation of the internal maxillary artery for intractable epistaxis. 3D imaging of internal maxillary artery using helical CT scan

    International Nuclear Information System (INIS)

    Handa, Toru; Yazin, Koji; Hirakawa, Katsuhiro; Fukushima, Noriyuki; Takumida, Masaya; Hirata, Shitau; Iguchi, Tetsuhiko; Amano, Yoshiharu

    2001-01-01

    Sever posterior epistaxis is one of the serious clinical problems. Nasal bleeding usually occurs in the anterior septal region, where it can be seen easily and controlled with topical cautery or localized packing. When the bleeding occurs in the posterior nose, it becomes a more serious problem. Many methods have been used to control posterior epistaxis. Some of these are electrocautery, posterior nasal packing, vascular ligation and therapeutic percutaneous embolization. Between 1997 and 2000, nineteen patients were admitted to our hospital because of intractable epistaxis. There were 16 male and 3 female patients whose average age was 55 years. Ten of 19 patients were hypertensive, and none of these had undergoing treatment. Five of 19 patients received maxillary artery ligation. Clinical applications of 3D imaging of the internal maxillary artery using helical CT scan were done for 5 patients. These images were helpful for planning of ligation of the internal maxillary artery. (author)

  5. Ligation of the internal maxillary artery for intractable epistaxis. 3D imaging of internal maxillary artery using helical CT scan

    Energy Technology Data Exchange (ETDEWEB)

    Handa, Toru [Akitsu Prefectual Hospital, Hiroshima (Japan); Yazin, Koji; Hirakawa, Katsuhiro; Fukushima, Noriyuki; Takumida, Masaya; Hirata, Shitau; Iguchi, Tetsuhiko; Amano, Yoshiharu

    2001-03-01

    Sever posterior epistaxis is one of the serious clinical problems. Nasal bleeding usually occurs in the anterior septal region, where it can be seen easily and controlled with topical cautery or localized packing. When the bleeding occurs in the posterior nose, it becomes a more serious problem. Many methods have been used to control posterior epistaxis. Some of these are electrocautery, posterior nasal packing, vascular ligation and therapeutic percutaneous embolization. Between 1997 and 2000, nineteen patients were admitted to our hospital because of intractable epistaxis. There were 16 male and 3 female patients whose average age was 55 years. Ten of 19 patients were hypertensive, and none of these had undergoing treatment. Five of 19 patients received maxillary artery ligation. Clinical applications of 3D imaging of the internal maxillary artery using helical CT scan were done for 5 patients. These images were helpful for planning of ligation of the internal maxillary artery. (author)

  6. The efficacy of hydrothermally obtained carbonated hydroxyapatite in healing alveolar bone defects in rats with or without corticosteroid treatment

    Directory of Open Access Journals (Sweden)

    Marković Dejan

    2014-01-01

    Full Text Available Background/Aim. Autogenous bone grafting has been the gold standard in clinical cases when bone grafts are required for bone defects in dentistry. The study was undertaken to evaluate multilevel designed carbonated hydroxyapatite (CHA obtained by hydrothermal method, as a bone substitute in healing bone defects with or without corticosteroid treatment in rats as assessed by histopathologic methods. Methods. Bone defects were created in the alveolar bone by teeth extraction in 12 rats. The animals were initially divided into two groups. The experimental group was pretreated with corticosteroids: methylprednisolone and dexamethasone, intramuscularly, while the control group was without therapy. Posterior teeth extraction had been performed after the corticosteroid therapy. The extraction defects were fulfilled with hydroxyapatite with bimodal particle sizes in the range of 50-250 μm and the sample from postextocactional defect of the alveolar bone was analyzed pathohystologically. Results. The histopatological investigations confirmed the biologic properties of the applied material. The evident growth of new bone in the alveolar ridge was clearly noticed in both groups of rats. Carbonated HA obtained by hydrothermal method promoted bone formation in the preformed defects, confirming its efficacy for usage in bone defects. Complete resorption of the material’s particles took place after 25 weeks. Conclusion. Hydroxyapatite completely meets the clinical requirements for a bone substitute material. Due to its microstructure, complete resorption took place during the observation period of the study. Corticosteroid treatment did not significantly affect new bone formation in the region of postextractional defects. [Projekat Ministarstva nauke Republike Srbije, br. 172026

  7. The global burden of alveolar echinococcosis.

    Directory of Open Access Journals (Sweden)

    Paul R Torgerson

    Full Text Available BACKGROUND: Human alveolar echinococcosis (AE is known to be common in certain rural communities in China whilst it is generally rare and sporadic elsewhere. The objective of this study was to provide a first estimate of the global incidence of this disease by country. The second objective was to estimate the global disease burden using age and gender stratified incidences and estimated life expectancy with the disease from previous results of survival analysis. Disability weights were suggested from previous burden studies on echinococcosis. METHODOLOGY/PRINCIPAL FINDINGS: We undertook a detailed review of published literature and data from other sources. We were unable to make a standardised systematic review as the quality of the data was highly variable from different countries and hence if we had used uniform inclusion criteria many endemic areas lacking data would not have been included. Therefore we used evidence based stochastic techniques to model uncertainty and other modelling and estimating techniques, particularly in regions where data quality was poor. We were able to make an estimate of the annual global incidence of disease and annual disease burden using standard techniques for calculation of DALYs. Our studies suggest that there are approximately 18,235 (CIs 11,900-28,200 new cases of AE per annum globally with 16,629 (91% occurring in China and 1,606 outside China. Most of these cases are in regions where there is little treatment available and therefore will be fatal cases. Based on using disability weights for hepatic carcinoma and estimated age and gender specific incidence we were able to calculate that AE results in a median of 666,434 DALYs per annum (CIs 331,000-1.3 million. CONCLUSIONS/SIGNIFICANCE: The global burden of AE is comparable to several diseases in the neglected tropical disease cluster and is likely to be one of the most important diseases in certain communities in rural China on the Tibetan plateau.

  8. Cediranib for Metastatic Alveolar Soft Part Sarcoma

    Science.gov (United States)

    Kummar, Shivaani; Allen, Deborah; Monks, Anne; Polley, Eric C.; Hose, Curtis D.; Ivy, S. Percy; Turkbey, Ismail B.; Lawrence, Scott; Kinders, Robert J.; Choyke, Peter; Simon, Richard; Steinberg, Seth M.; Doroshow, James H.; Helman, Lee

    2013-01-01

    Purpose Alveolar soft part sarcoma (ASPS) is a rare, highly vascular tumor, for which no effective standard systemic treatment exists for patients with unresectable disease. Cediranib is a potent, oral small-molecule inhibitor of all three vascular endothelial growth factor receptors (VEGFRs). Patients and Methods We conducted a phase II trial of once-daily cediranib (30 mg) given in 28-day cycles for patients with metastatic, unresectable ASPS to determine the objective response rate (ORR). We also compared gene expression profiles in pre- and post-treatment tumor biopsies and evaluated the effect of cediranib on tumor proliferation and angiogenesis using positron emission tomography and dynamic contrast-enhanced magnetic resonance imaging. Results Of 46 patients enrolled, 43 were evaluable for response at the time of analysis. The ORR was 35%, with 15 of 43 patients achieving a partial response. Twenty-six patients (60%) had stable disease as the best response, with a disease control rate (partial response + stable disease) at 24 weeks of 84%. Microarray analysis with validation by quantitative real-time polymerase chain reaction on paired tumor biopsies from eight patients demonstrated downregulation of genes related to vasculogenesis. Conclusion In this largest prospective trial to date of systemic therapy for metastatic ASPS, we observed that cediranib has substantial single-agent activity, producing an ORR of 35% and a disease control rate of 84% at 24 weeks. On the basis of these results, an open-label, multicenter, randomized phase II registration trial is currently being conducted for patients with metastatic ASPS comparing cediranib with another VEGFR inhibitor, sunitinib. PMID:23630200

  9. Evaluation of the treatment modalities for neurosensory disturbances of the inferior alveolar nerve following retromolar bone harvesting for bone augmentation.

    Science.gov (United States)

    Nogami, Shinnosuke; Yamauchi, Kensuke; Shiiba, Shunji; Kataoka, Yoshihiro; Hirayama, Bunichi; Takahashi, Tetsu

    2015-03-01

    The purpose of this study was to evaluate the treatment modalities for neurosensory disturbances (NSDs) of the inferior alveolar nerve occurring after retromolar bone harvesting for bone augmentation procedures before implant placement. One hundred four patients, of which 49 and 55 exhibited vertical or horizontal alveolar ridge defects in the mandible and maxilla, respectively, were enrolled. Nineteen patients underwent block bone grafting, 38 underwent guided bone generation or autogenous bone grafting combined with titanium mesh reconstruction, and 47 underwent sinus floor augmentation. Using a visual analog scale, we examined subjective symptoms and discomfort related to sensory alteration within the area of the NSDs in these patients. NSDs were clinically investigated using a two-point discrimination test with blunt-tipped calipers. In addition, neurometry was used for evaluation of trigeminal nerve injury. We tested three treatment modalities for NSDs: follow-up observation (no treatment), medication, and stellate ganglion block (SGB). A week after surgery, 26 patients (25.0%) experienced NSDs. Five patients received no treatment, 10 patients received medication, and 11 patients received SGB. Three months after surgery, patients in the medication and SGB group achieved complete recovery. Current perception threshold values recovered to near-baseline values at 3 months: recovery was much earlier in this group than in the other two groups. SGB can accelerate recovery from NSDs. Our results justify SGB as a reasonable treatment modality for NSDs occurring after the harvesting of retromolar bone grafts. Wiley Periodicals, Inc.

  10. Orthodontic management of bilateral maxillary canine-first premolar transposition and bilateral agenesis of maxillary lateral incisors: a case report.

    Science.gov (United States)

    Di Palma, Elena; Di Giuseppe, Biagio; Tepedino, Michele; Chimenti, Claudio

    2015-01-01

    Maxillary canine-first premolar transposition (Mx.C.P1) is an uncommon dental positional anomaly that may create many orthodontic problems from both esthetic and functional points of view. In this report we show the orthodontic management of a case of Mx.C.P1 associated with bilateral maxillary lateral incisor agenesis and unilateral mandibular second premolar agenesis The patient was treated with a multibracket appliance and the extraction of the lower premolar. treatment was completed without the need for any prosthetic replacement.

  11. Dietary boron does not affect tooth strength, micro-hardness, and density, but affects tooth mineral composition and alveolar bone mineral density in rabbits fed a high-energy diet.

    Science.gov (United States)

    Hakki, Sema S; SiddikMalkoc; Dundar, Niyazi; Kayis, Seyit Ali; Hakki, Erdogan E; Hamurcu, Mehmet; Baspinar, Nuri; Basoglu, Abdullah; Nielsen, Forrest H; Götz, Werner

    2015-01-01

    The objective of this study was to determine whether dietary boron (B) affects the strength, density and mineral composition of teeth and mineral density of alveolar bone in rabbits with apparent obesity induced by a high-energy diet. Sixty female, 8-month-old, New Zealand rabbits were randomly assigned for 7 months into five groups as follows: (1) control 1, fed alfalfa hay only (5.91 MJ/kg and 57.5 mg B/kg); (2) control 2, high energy diet (11.76 MJ and 3.88 mg B/kg); (3) B10, high energy diet + 10 mg B gavage/kg body weight/96 h; (4) B30, high energy diet + 30 mg B gavage/kg body weight/96 h; (5) B50, high energy diet + 50 mg B gavage/kg body weight/96 h. Maxillary incisor teeth of the rabbits were evaluated for compression strength, mineral composition, and micro-hardness. Enamel, dentin, cementum and pulp tissue were examined histologically. Mineral densities of the incisor teeth and surrounding alveolar bone were determined by using micro-CT. When compared to controls, the different boron treatments did not significantly affect compression strength, and micro-hardness of the teeth, although the B content of teeth increased in a dose-dependent manner. Compared to control 1, B50 teeth had decreased phosphorus (P) concentrations. Histological examination revealed that teeth structure (shape and thickness of the enamel, dentin, cementum and pulp) was similar in the B-treated and control rabbits. Micro CT evaluation revealed greater alveolar bone mineral density in B10 and B30 groups than in controls. Alveolar bone density of the B50 group was not different than the controls. Although the B treatments did not affect teeth structure, strength, mineral density and micro-hardness, increasing B intake altered the mineral composition of teeth, and, in moderate amounts, had beneficial effects on surrounding alveolar bone.

  12. Comparative evaluation of the efficacy of the cyclooxygenase pathway inhibitor and nitric oxide synthase inhibitor in the reduction of alveolar bone loss in ligature induced periodontitis in rats: An experimental study

    Directory of Open Access Journals (Sweden)

    Rekha Jagadish

    2014-01-01

    Full Text Available Background: Alveolar bone loss is the most striking feature of periodontal disease. The aim of this study was to investigate the effect of a cyclooxygenase (COX pathway inhibitor and nitric oxide synthase (NOS inhibitor in the reduction of alveolar bone loss in an experimental periodontal disease (EPD model. Materials and Methods: The study was conducted on 60 Wistar rats divided into three groups of 20 rats each and then subjected to a ligature placement around the left maxillary second molars. Group 1 rats were treated with COX inhibitor (diclofenac sodium 10 mg/kg/d, group 2 with NOS inhibitor (aminoguanidine hydrochloride 10 mg/kg/d and group 3 served as controls, receiving only saline, intraperitoneally 1h before EPD induction and daily until the sacrifice on the 11 th day. Leukogram was performed before ligation, at 6 h and at the first, seventh and 11 th days after EPD induction. After sacrifice, all the excised maxillae were subjected to morphometric and histometric analysis to measure the alveolar bone loss. Histopathological analysis was carried out to estimate cell influx, alveolar bone and cementum integrity. Results: Induction of experimental periodontitis in the rat model produced pronounced leucocytosis, which was significantly reduced by the administration of diclofenac sodium and aminoguanidine on the 11 th day. In morphometric and histometric examinations, both the test drugs significantly (P < 0.05 inhibited the alveolar bone loss as compared with the control group. Conclusion: Both COX inhibitor and NOS inhibitor are equally effective in inhibiting the inflammatory bone resorption in an experimental periodontitis model.

  13. Implant angulation: 2-year retrospective analysis on the influence of dental implant angle insertion on marginal bone resorption in maxillary and mandibular osseous onlay grafts.

    Science.gov (United States)

    Ramaglia, Luca; Toti, Paolo; Sbordone, Carolina; Guidetti, Franco; Martuscelli, Ranieri; Sbordone, Ludovico

    2015-05-01

    The purpose of this study was to determine the existence of correlations between marginal peri-implant linear bone loss and the angulation of implants in maxillary and mandibular augmented areas over the course of a 2-year survey. Dependent variables described the sample of the present retrospective chart review. By using three-dimensional radiographs, input variables, describing the implant angulation (buccal-lingual angle [φ] and mesial-distal angle [θ]) were measured; outcome variables described survival rate and marginal bone resorption (MBR) around dental implants in autogenous grafts (10 maxillae and 14 mandibles). Pairwise comparisons and linear correlation coefficient were computed. The peri-implant MBR in maxillary buccal and palatal areas appeared less intensive in the presence of an increased angulation of an implant towards the palatal side. Minor MBR was recorded around mandibular dental implants positioned at a right angle and slightly angulated towards the mesial. Resorption in buccal areas may be less intensive as the angulation of placed implants increases towards the palatal area in the maxilla, whereas for the mandible, a greater inclination towards the lingual area could be negative. In the mandibular group, when the implant was slightly angulated in the direction of the distal area, bone resorption seemed to be more marked in the buccal area. In the planning of dental implant placement in reconstructed alveolar bone with autograft, the extremely unfavourable resorption at the buccal aspect should be considered; this marginal bone loss seemed to be very sensitive to the angulation of the dental implant.

  14. Correlation of gingival thickness with gingival width, probing depth, and papillary fill in maxillary anterior teeth in students of a dental college in Navi Mumbai.

    Science.gov (United States)

    Singh, Jyotsna; Rathod, Varsha J; Rao, Prajakta R; Patil, Aardra A; Langade, Deepak G; Singh, Roshan K

    2016-01-01

    The gingival biotype is of utmost importance for esthetics and biologic function. Anatomical characteristic of periodontium such as gingival thickness (GT), width of keratinized gingiva, and alveolar bone morphology will determine the behavior of periodontium when subjected to physical, chemical, or bacterial insult or during therapeutic procedure. The aim of this study was to correlate the GT with gingival width (GW), probing depth (PD), and papillary fill (PF) in relation to maxillary anterior region. Undergraduate dental students and interns from a dental college in Navi Mumbai were enrolled in the study according to the inclusion criteria. Six teeth per subject were assessed; a total of 2178 maxillary anterior teeth were examined. Subjects were examined clinically for GT, width of keratinized gingiva, pocket depth, and interdental PF. The data obtained was tabulated and subjected to statistical analysis. Spearman's correlation analysis test was performed to find the correlation of GT with GW, PD, and PF. Positive correlation was found between GT and GW ( r = 0.241). No significant correlation could be found between GT and PD; and between GT and PF. The present study confirmed a positive correlation between GT and GW. A weak negative correlation was found between GT and PD.

  15. [Alveolar ventilation and recruitment under lung protective ventilation].

    Science.gov (United States)

    Putensen, Christian; Muders, Thomas; Kreyer, Stefan; Wrigge, Hermann

    2008-11-01

    Goal of mechanical ventilation is to improve gas exchange and reduce work of breathing without contributing to further lung injury. Besides providing adequate EELV and thereby arterial oxygenation PEEP in addition to a reduction in tidal volume is required to prevent cyclic alveolar collapse and tidal recruitment and hence protective mechanical ventilation. Currently, there is no consensus if and if yes at which price alveolar recruitment with high airway pressures should be intended ("open up the lung"), or if it is more important to reduce the mechanical stress and strain to the lungs as much as possible ("keep the lung closed"). Potential of alveolar recruitment differs from patient to patient but also between lung regions. Potential for recruitment depends probably more on regional lung mechanics - especially on lung elastance - than on the underlying disease. Based on available data neither high PEEP nor other methods used for alveolar recruitment could demonstrate a survival benefit in patients with ARDS. These results may support an individualized titration of PEEP or other manoeuvres used for recruitment taking into consideration the regional effects. Bedside imaging techniques allowing titration of PEEP or other manoeuvres to prevent end-expiratory alveolar collapse (tidal recruitment) and inspiratory overinflation may be a promising development.

  16. Acute cigarette smoke exposure increases alveolar permeability in rabbits

    International Nuclear Information System (INIS)

    Witten, M.L.; Lemen, R.J.; Quan, S.F.; Sobonya, R.E.; Roseberry, H.; Stevenson, J.L.; Clayton, J.

    1985-01-01

    The authors measured lung clearance of aerosolized technetium-labeled diethylenetriamine pentaacetic acid (/sup 99m/TcDTPA) as an index of alveolar epithelial permeability in rabbits exposed to cigarette smoke. Eighteen rabbits were randomly assigned to 3 equal-size groups: control, all smoke exposure (ASE), and limited smoke exposure (LSE). Cigarette or sham smoke was delivered by syringe in a series of 5, 10, 20, and 30 tidal volume breaths with a 20-min counting period between each subset of breaths to determine /sup 99m/TcDTPA biologic half-life (T 1 / 2 ). Mean T 1 / 2 minimum was significantly lower for ASE and LSE rabbits than by control rabbits. They observed a significant difference at 20 and 30 breath exposures between the control and ASE group mean values for T 1 / 2 , arterial blood pressure, and peak airway pressure. A combination of light and electron microscopy showed focal alveolar edema and hemorrhage in the ASE and LSE groups but no alveolar-capillary membrane damage. In summary, acute cigarette smoke exposure increases alveolar permeability as measured by /sup 99m/TcDTPA clearance, but there was no detectable ultrastructural alteration of the alveolar-capillary membrane

  17. A basic review on the inferior alveolar nerve block techniques.

    Science.gov (United States)

    Khalil, Hesham

    2014-01-01

    The inferior alveolar nerve block is the most common injection technique used in dentistry and many modifications of the conventional nerve block have been recently described in the literature. Selecting the best technique by the dentist or surgeon depends on many factors including the success rate and complications related to the selected technique. Dentists should be aware of the available current modifications of the inferior alveolar nerve block techniques in order to effectively choose between these modifications. Some operators may encounter difficulty in identifying the anatomical landmarks which are useful in applying the inferior alveolar nerve block and rely instead on assumptions as to where the needle should be positioned. Such assumptions can lead to failure and the failure rate of inferior alveolar nerve block has been reported to be 20-25% which is considered very high. In this basic review, the anatomical details of the inferior alveolar nerve will be given together with a description of its both conventional and modified blocking techniques; in addition, an overview of the complications which may result from the application of this important technique will be mentioned.

  18. Hypocapnic but not metabolic alkalosis impairs alveolar fluid reabsorption.

    Science.gov (United States)

    Myrianthefs, Pavlos M; Briva, Arturo; Lecuona, Emilia; Dumasius, Vidas; Rutschman, David H; Ridge, Karen M; Baltopoulos, George J; Sznajder, Jacob Iasha

    2005-06-01

    Acid-base disturbances, such as metabolic or respiratory alkalosis, are relatively common in critically ill patients. We examined the effects of alkalosis (hypocapnic or metabolic alkalosis) on alveolar fluid reabsorption in the isolated and continuously perfused rat lung model. We found that alveolar fluid reabsorption after 1 hour was impaired by low levels of CO2 partial pressure (PCO2; 10 and 20 mm Hg) independent of pH levels (7.7 or 7.4). In addition, PCO2 higher than 30 mm Hg or metabolic alkalosis did not have an effect on this process. The hypocapnia-mediated decrease of alveolar fluid reabsorption was associated with decreased Na,K-ATPase activity and protein abundance at the basolateral membranes of distal airspaces. The effect of low PCO2 on alveolar fluid reabsorption was reversible because clearance normalized after correcting the PCO2 back to normal levels. These data suggest that hypocapnic but not metabolic alkalosis impairs alveolar fluid reabsorption. Conceivably, correction of hypocapnic alkalosis in critically ill patients may contribute to the normalization of lung ability to clear edema.

  19. Histomorphometric evaluation of the effect of systemic and topical ozone on alveolar bone healing following tooth extraction in rats.

    Science.gov (United States)

    Erdemci, F; Gunaydin, Y; Sencimen, M; Bassorgun, I; Ozler, M; Oter, S; Gulses, A; Gunal, A; Sezgin, S; Bayar, G R; Dogan, N; Gider, I K

    2014-06-01

    The aim of this study was to investigate the effects of systemic and topical ozone applications on alveolar bone healing following tooth extraction. One hundred and twelve male Wistar rats were divided into eight groups of 14 rats each; seven groups were experimental (A-G) and one formed the control group (K). The experimental groups were further divided into two sub-groups, with seven rats in each - sacrificed on days 14 and 28 (subgroups 1 and 2). The maxillary right central incisors were extracted under general anaesthesia following the administration of local anaesthesia. After sacrifice, semi-serial histological sections were prepared, and mineralized and trabecular bone and osteoid and osteoblast surfaces were measured. Measurements of the trabecular bone showed statistically higher values in the groups treated with systemic ozone (D(2): 50.01 ± 2.12; E(2): 49.03 ± 3.03; F(2): 48.76 ± 2.61; G(2): 50.24 ± 3.37) than in the groups that underwent topical ozone administration (A(2): 46.01 ± 3.07; B(2): 46.79 ± 3.09; C(2): 47.07 ± 2.12; P = 0.030 (G(2)-A(2), G(2)-B(2), G(2)-C(2))). Within the limitations of the current study, it may be concluded that postoperative long-term systemic ozone application can accelerate alveolar bone healing following extraction. However, additional studies are required to clarify the effects of the different ozone applications on new bone formation. Copyright © 2014 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  20. Expansão maxilar em adultos e adolescentes com maturação esquelética avançada Maxillary expansion in adults and adolescents with advanced skeletal maturation

    Directory of Open Access Journals (Sweden)

    Rowdley Robert Pereira Rossi

    2009-10-01

    Full Text Available A deficiência transversa da maxila é um fator agravante e complicador do tratamento ortodôntico em adultos. Sua correção ainda gera dúvidas e controvérsias entre clínicos e pesquisadores. O objetivo deste trabalho foi analisar e discutir fatores determinantes para o planejamento da expansão maxilar em adultos e adolescentes com maturação esquelética avançada. Ausências dentárias múltiplas, grandes inclinações dentoalveolares para vestibular, recessão gengival, perda óssea alveolar e mobilidade dos dentes posterossuperiores contraindicam a realização de expansão rápida da maxila em indivíduos adultos ou com maturação esquelética avançada. No entanto, esses fatores não devem ser considerados isoladamente para a escolha do método de expansão palatal nesses pacientes. Nessas situações, a Expansão Rápida da Maxila Assistida Cirurgicamente (ERMAC pode ser uma opção, entretanto, a escolha por essa técnica deve basear-se principalmente na idade do paciente, no grau de maturação esquelética, na localização da deficiência transversa da maxila e nas estruturas anatômicas que oferecem maior resistência à expansão maxilar. O Hyrax é o aparelho mais indicado para indivíduos que vão se submeter à ERMAC.The transverse maxillary deficiency is a complication factor in adults' orthodontic treatment. Its correction still generates doubts and controversies between clinicians and researchers. The aim of this paper is to discuss the determinative factors in planning maxillary expansion in adults and adolescents with advanced skeletal maturation. Multiple dental absences, several dentoalveolar buccal inclination, gingival recession, alveolar bone loss and mobility of posterosuperior teeth contraindicate the rapid maxillary expansion in adults or patients with advanced skeletal maturation. However, these factors should not be considered separately when choosing the method for palatal expansion in adults. In these