On exact triangles consisting of stable vector bundles on tori
Kobayashi, Kazushi
2016-01-01
In this paper, we consider the exact triangles consisting of stable holomorphic vector bundles on one-dimensional complex tori, and discuss their relations with the corresponding Fukaya category via the homological mirror symmetry.
Sperm bundles in the seminal vesicles of sexually mature Lasius ant males.
Burnett, William E; Heinze, Jürgen
2014-01-01
In many insects, sperm cells are produced in bundles with their heads being held together by a glycoprotein matrix secreted by a cyst cell. Mature sperm cells in the seminal vesicles are usually free, but in sawflies and several other insects, such structures (spermatodesmata) remain intact and sperm cells may be ejaculated as bundles. Here we report the occurrence of spermatodesmata in mature males of the ant Lasius pallitarsis. Microscopic investigations of the abdominal contents of males immediately prior to their nuptial flights showed that the anterior ends of numerous sperm cells were embedded in an oval-shaped 20 by 30 micrometer extracellular fibrous cap. Individual sperm ranged in length from 55 to 75 micrometers with an average overall length of 65 micrometers. The bulb-shaped heads of the sperm were relatively small, only about 1.5 micrometers in length and about 1.1 micrometers in diameter. The diameter of the sperm tails was approximately 1 micrometer. Observations of live preparations of the spermatodesmata showed increasingly active undulating wave-like movement of the sperm tails as the slide preparations aged. This appears to be the first case of sperm bundles being present in the seminal vesicles of mature ant males--males that are immediately poised to complete their nuptial mating flight.
Sperm bundles in the seminal vesicles of sexually mature Lasius ant males.
William E Burnett
Full Text Available In many insects, sperm cells are produced in bundles with their heads being held together by a glycoprotein matrix secreted by a cyst cell. Mature sperm cells in the seminal vesicles are usually free, but in sawflies and several other insects, such structures (spermatodesmata remain intact and sperm cells may be ejaculated as bundles. Here we report the occurrence of spermatodesmata in mature males of the ant Lasius pallitarsis. Microscopic investigations of the abdominal contents of males immediately prior to their nuptial flights showed that the anterior ends of numerous sperm cells were embedded in an oval-shaped 20 by 30 micrometer extracellular fibrous cap. Individual sperm ranged in length from 55 to 75 micrometers with an average overall length of 65 micrometers. The bulb-shaped heads of the sperm were relatively small, only about 1.5 micrometers in length and about 1.1 micrometers in diameter. The diameter of the sperm tails was approximately 1 micrometer. Observations of live preparations of the spermatodesmata showed increasingly active undulating wave-like movement of the sperm tails as the slide preparations aged. This appears to be the first case of sperm bundles being present in the seminal vesicles of mature ant males--males that are immediately poised to complete their nuptial mating flight.
Dubois, J.; Perrin, M.; Mangin, J.F.; Cointepas, Y.; Duchesnay, E.; Le Bihan, D.; Hertz-Pannier, L. [CEA, Serv Hosp Frederic Joliot, UNAF, F-91406 Orsay (France); Dehaene-Lambertz, G. [INSERM, U562, Orsay (France); Dubois, J.; Dehaene-Lambertz, G.; Perrin, M.; Mangin, J.F.; Cointepas, Y.; Duchesnay, E.; Le Bihan, D.; Hertz-Pannier, L. [IFR49, Paris (France)
2008-07-01
Normal cognitive development in infants follows a well-known temporal sequence, which is assumed to be correlated with the structural maturation of underlying functional networks. Postmortem studies and, more recently, structural MR imaging studies have described qualitatively the heterogeneous spatio-temporal progression of white matter myelination. However, in vivo quantification of the maturation phases of fiber bundles is still lacking. We used noninvasive diffusion tensor MR imaging and tractography in twenty-three 1-4-month-old healthy infants to quantify the early maturation of the main cerebral fascicles. A specific maturation model, based on the respective roles of different maturational processes on the diffusion phenomena, was designed to highlight asynchronous maturation across bundles by evaluating the time-course of mean diffusivity and anisotropy changes over the considered developmental period. Using an original approach, a progression of maturation in four relative stages was determined in each tract by estimating the maturation state and speed, from the diffusion indices over the infants group compared with an adults group on one hand, and in each tract compared with the average over bundles on the other hand. Results were coherent with, and extended previous findings in 8 of 11 bundles, showing the anterior limb of the internal capsule and cingulum as the most immature, followed by the optic radiations, arcuate and inferior longitudinal fascicles, then the spino-thalamic tract and fornix, and finally the cortico-spinal tract as the most mature bundle. Thus, this approach provides new quantitative landmarks for further noninvasive research on brain-behavior relationships during normal and abnormal development. (authors)
Ray Krishanu
2009-05-01
Full Text Available Abstract Background In Drosophila, all the 64 clonally derived spermatocytes differentiate in syncytium inside two somatic-origin cyst cells. They elongate to form slender spermatids, which are individualized and then released into the seminal vesicle. During individualization, differentiating spermatids are organized in a tight bundle inside the cyst, which is expected to play an important role in sperm selection. However, actual significance of this process and its underlying mechanism are unclear. Results We show that dynamic F-actin-based processes extend from the head cyst cell at the start of individualization, filling the interstitial space at the rostral ends of the maturing spermatid bundle. In addition to actin, these structures contained lamin, beta-catenin, dynamin, myosin VI and several other filopodial components. Further, pharmacological and genetic analyses showed that cytoskeletal stability and dynamin function are essential for their maintenance. Disruption of these F-actin based processes was associated with spermatid bundle disassembly and premature sperm release inside the testis. Conclusion Altogether, our data suggests that the head cyst cell adheres to the maturing spermatid heads through F-actin-based extensions, thus maintaining them in a tight bundle. This is likely to regulate mature sperm release into the seminal vesicle. Overall, this process bears resemblance to mammalian spermiation.
Zhuo CHEN; Zhang Ju LIU; Yun He SHENG
2014-01-01
In this paper, we construct a category of short exact sequences of vector bundles and prove that it is equivalent to the category of double vector bundles. Moreover, operations on double vector bundles can be transferred to operations on the corresponding short exact sequences. In particular, we study the duality theory of double vector bundles in term of the corresponding short exact sequences. Examples including the jet bundle and the Atiyah algebroid are discussed.
Chen, Zhuo; Liu, Zhangju; Sheng, Yunhe
2011-01-01
In this paper, we construct a category of short exact sequences of vector bundles and prove that it is equivalent to the category of double vector bundles. Moreover, operations on double vector bundles can be transferred to operations on the corresponding short exact sequences. In particular, we study the duality theory of double vector bundles in term of the corresponding short exact sequences. Examples including the jet bundle and the Atiyah algebroid are discussed.
Principal noncommutative torus bundles
Echterhoff, Siegfried; Nest, Ryszard; Oyono-Oyono, Herve
2008-01-01
In this paper we study continuous bundles of C*-algebras which are non-commutative analogues of principal torus bundles. We show that all such bundles, although in general being very far away from being locally trivial bundles, are at least locally trivial with respect to a suitable bundle version...... of bivariant K-theory (denoted RKK-theory) due to Kasparov. Using earlier results of Echterhoff and Williams, we shall give a complete classification of principal non-commutative torus bundles up to equivariant Morita equivalence. We then study these bundles as topological fibrations (forgetting the group...... action) and give necessary and sufficient conditions for any non-commutative principal torus bundle being RKK-equivalent to a commutative one. As an application of our methods we shall also give a K-theoretic characterization of those principal torus-bundles with H-flux, as studied by Mathai...
Hydraulic characteristics of HANARO fuel bundles
Cho, S.; Chung, H. J.; Chun, S. Y.; Yang, S. K.; Chung, M. K. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)
1997-12-31
This paper presents the hydraulic characteristics measured by using LDV (Laser Doppler Velocimetry) in subchannels of HANARO, KAERI research reactor, fuel bundle. The fuel bundle consists of 18 axially finned rods with 3 spacer grids, which are arranged in cylindrical configuration. The effects of the spacer grids on the turbulent flow were investigated by the experimental results. Pressure drops for each component of the fuel bundle were measured, and the friction factors of fuel bundle and loss coefficients for the spacer grids were estimated from the measured pressure drops. Implications regarding the turbulent thermal mixing were discussed. Vibration test results measured by using laser vibrometer were presented. 9 refs., 12 figs. (Author)
Creep rupture of fiber bundles
Linga, G.; Ballone, P.; Hansen, Alex
2015-01-01
The creep deformation and eventual breaking of polymeric samples under a constant tensile load F is investigated by molecular dynamics based on a particle representation of the fiber bundle model. The results of the virtual testing of fibrous samples consisting of 40000 particles arranged on Nc=4...
Heat exchanger with helical bundles of finned tubes
Eyking, H.J.
1975-01-23
The invention applies to a heat exchanger with helical bundles of tubes consisting of finned tubes separated by spacers. The spacers are designed as closed holding cylinders with holding devices for the tube bundles, each ot which surrounds a bundle of tubes. This construction serves to simplify the production process and to enable the use of the heat exchanger at higher loads.
Line bundle embeddings for heterotic theories
Groot Nibbelink, Stefan [Muenchen Univ. (Germany). Arnold Sommerfeld Center for Theoretical Physics; Ruehle, Fabian [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)
2016-03-15
In heterotic string theories consistency requires the introduction of a non-trivial vector bundle. This bundle breaks the original ten-dimensional gauge groups E{sub 8} x E{sub 8} or SO(32) for the supersymmetric heterotic string theories and SO(16) x SO(16) for the non-supersymmetric tachyon-free theory to smaller subgroups. A vast number of MSSM-like models have been constructed up to now, most of which describe the vector bundle as a sum of line bundles. However, there are several different ways of describing these line bundles and their embedding in the ten-dimensional gauge group. We recall and extend these different descriptions and explain how they can be translated into each other.
Line bundle embeddings for heterotic theories
Nibbelink, Stefan Groot
2016-01-01
In heterotic theories consistency requires the introduction of a non-trivial vector bundle. This bundle breaks the original ten-dimensional gauge groups E_8 x E_8 or SO(32) for the supersymmetric heterotic theories and SO(16) x SO(16) for the non-supersymmetric tachyon-free theory to smaller subgroups. A vast number of MSSM-like models have been constructed up to now, most of which describe the vector bundle as a sum of line bundles. However, there are several different ways of describing these line bundles and their embedding in the ten-dimensional gauge group. We recall and extend these different descriptions and explain how they can be translated into each other.
Line bundle embeddings for heterotic theories
Nibbelin, Stefan Groot; Ruehle, Fabian
2016-04-01
In heterotic string theories consistency requires the introduction of a non-trivial vector bundle. This bundle breaks the original ten-dimensional gauge groups E8 × E8 or SO(32) for the supersymmetric heterotic string theories and SO(16) × SO(16) for the non-supersymmetric tachyon-free theory to smaller subgroups. A vast number of MSSM-like models have been constructed up to now, most of which describe the vector bundle as a sum of line bundles. However, there are several different ways of describing these line bundles and their embedding in the ten-dimensional gauge group. We recall and extend these different descriptions and explain how they can be translated into each other.
Biswas, Indranil
2011-01-01
We construct projectivization of a parabolic vector bundle and a tautological line bundle over it. It is shown that a parabolic vector bundle is ample if and only if the tautological line bundle is ample. This allows us to generalize the notion of a k-ample bundle, introduced by Sommese, to the context of parabolic bundles. A parabolic vector bundle $E_*$ is defined to be k-ample if the tautological line bundle ${\\mathcal O}_{{\\mathbb P}(E_*)}(1)$ is $k$--ample. We establish some properties of parabolic k-ample bundles.
The ABCDEF Implementation Bundle
Annachiara Marra
2016-08-01
Full Text Available Long-term morbidity, long-term cognitive impairment and hospitalization-associated disability are common occurrence in the survivors of critical illness, with significant consequences for patients and for the caregivers. The ABCDEF bundle represents an evidence-based guide for clinicians to approach the organizational changes needed for optimizing ICU patient recovery and outcomes. The ABCDEF bundle includes: Assess, Prevent, and Manage Pain, Both Spontaneous Awakening Trials (SAT and Spontaneous Breathing Trials (SBT, Choice of analgesia and sedation, Delirium: Assess, Prevent, and Manage, Early mobility and Exercise, and Family engagement. The purpose of this review is to describe the core features of the ABCDEF bundle.
Mobility of Taxol in Microtubule Bundles
Ross, J.
2003-06-01
Mobility of taxol inside microtubules was investigated using fluorescence recovery after photobleaching (FRAP) on flow-aligned bundles. Bundles were made of microtubules with either GMPCPP or GTP at the exchangeable site on the tubulin dimer. Recovery times were sensitive to bundle thickness and packing, indicating that taxol molecules are able to move laterally through the bundle. The density of open binding sites along a microtubule was varied by controlling the concentration of taxol in solution for GMPCPP samples. With > 63% sites occupied, recovery times were independent of taxol concentration and, therefore, inversely proportional to the microscopic dissociation rate, k_{off}. It was found that 10*k_{off} (GMPCPP) ~ k_{off} (GTP), consistent with, but not fully accounting for, the difference in equilibrium constants for taxol on GMPCPP and GTP microtubules. With taxol along the microtubule interior is hindered by rebinding events when open sites are within ~7 nm of each other.
Photonic bandgap fiber bundle spectrometer
Hang, Qu; Syed, Imran; Guo, Ning; Skorobogatiy, Maksim
2010-01-01
We experimentally demonstrate an all-fiber spectrometer consisting of a photonic bandgap fiber bundle and a black and white CCD camera. Photonic crystal fibers used in this work are the large solid core all-plastic Bragg fibers designed for operation in the visible spectral range and featuring bandgaps of 60nm - 180nm-wide. 100 Bragg fibers were chosen to have complimentary and partially overlapping bandgaps covering a 400nm-840nm spectral range. The fiber bundle used in our work is equivalent in its function to a set of 100 optical filters densely packed in the area of ~1cm2. Black and white CCD camera is then used to capture spectrally "binned" image of the incoming light at the output facet of a fiber bundle. To reconstruct the test spectrum from a single CCD image we developed an algorithm based on pseudo-inversion of the spectrometer transmission matrix. We then study resolution limit of this spectroscopic system by testing its performance using spectrally narrow test peaks (FWHM 5nm-25nm) centered at va...
Subtleties Concerning Conformal Tractor Bundles
Graham, C Robin
2012-01-01
The realization of tractor bundles as associated bundles in conformal geometry is studied. It is shown that different natural choices of principal bundle with normal Cartan connection corresponding to a given conformal manifold can give rise to topologically distinct associated tractor bundles for the same inducing representation. Consequences for homogeneous models and conformal holonomy are described. A careful presentation is made of background material concerning standard tractor bundles and equivalence between parabolic geometries and underlying structures.
Bussink, Barbara E; Holst, Anders Gaarsdal; Jespersen, Lasse
2013-01-01
AimsTo determine the prevalence, predictors of newly acquired, and the prognostic value of right bundle branch block (RBBB) and incomplete RBBB (IRBBB) on a resting 12-lead electrocardiogram in men and women from the general population.Methods and resultsWe followed 18 441 participants included.......5%/2.3% in women, P Right bundle branch block was associated with significantly...... increased all-cause and cardiovascular mortality in both genders with age-adjusted hazard ratios (HR) of 1.31 [95% confidence interval (CI), 1.11-1.54] and 1.87 (95% CI, 1.48-2.36) in the gender pooled analysis with little attenuation after multiple adjustment. Right bundle branch block was associated...
Lodish, Maya B; Gourgari, Evgenia; Sinaii, Ninet; Hill, Suvimol; Libuit, Laura; Mastroyannis, Spyridon; Keil, Margaret; Batista, Dalia L; Stratakis, Constantine A
2014-04-01
To assess skeletal maturity by measuring bone age (BA) in children with Cushing syndrome (CS) before and 1-year after transsphenoidal surgery or adrenalectomy, and to correlate BA with hormone levels and other measurements. This case series conducted at the National Institutes of Health Clinical Center included 93 children with Cushing disease (CD) (43 females; mean age, 12.3 ± 2.9 years) and 31 children with adrenocorticotropic hormone-independent CS (AICS) (22 females, mean age 10.3 ± 4.5 years). BA was obtained before surgery and at follow-up. Outcome measures were comparison of BA in CD vs AICS and analysis of the effects of hypercortisolism, insulin excess, body mass index, and androgen excess on BA. Twenty-six of the 124 children (21.0%) had advanced BA, compared with the expected general population prevalence of 2.5% (P < .0001). Only 4 of 124 (3.2%) had delayed BA. The majority of children (76%) had normal BA. The average BA z-score was similar in the children with CD and those with AICS (0.6 ± 1.4 vs 0.5 ± 1.8; P = .8865). Body mass index SDS and normalized values of dehydroepiandrosterone, dehydroepiandrosterone sulfate, androsteonedione, estradiol, and testosterone were all significantly higher in the children with advanced BA vs those with normal or delayed BA. Fifty-nine children who remained in remission from CD had follow-up BA 1.2 ± 0.3 years after transsphenoidal surgery, demonstrating decreased BA z-score (1.0 ± 1.6 vs 0.3 ± 1.4; P < .0001). Contrary to common belief, endogenous CS in children appears to be associated with normal or even advanced skeletal maturation. When present, BA advancement in CS is related to obesity, insulin resistance, and elevated adrenal androgen levels and aromatization. This finding may have significant implications for treatment decisions and final height predictions in these children. Published by Mosby, Inc.
J. W. Kitchen
1994-01-01
Full Text Available We study bundles of Banach algebras π:A→X, where each fiber Ax=π−1({x} is a Banach algebra and X is a compact Hausdorff space. In the case where all fibers are commutative, we investigate how the Gelfand representation of the section space algebra Γ(π relates to the Gelfand representation of the fibers. In the general case, we investigate how adjoining an identity to the bundle π:A→X relates to the standard adjunction of identities to the fibers.
Principal -bundles on Nodal Curves
Usha N Bhosle
2001-08-01
Let be a connected semisimple affine algebraic group defined over . We study the relation between stable, semistable -bundles on a nodal curve and representations of the fundamental group of . This study is done by extending the notion of (generalized) parabolic vector bundles to principal -bundles on the desingularization of and using the correspondence between them and principal -bundles on . We give an isomorphism of the stack of generalized parabolic bundles on with a quotient stack associated to loop groups. We show that if is simple and simply connected then the Picard group of the stack of principal -bundles on is isomorphic to ⊕ , being the number of components of .
On projective space bundle with nef normalized tautological line bundle
Yasutake, Kazunori
2011-01-01
In this paper, we study the structure of projective space bundles whose relative anti-canonical line bundle is nef. As an application, we get a characterization of abelian varieties up to finite etale covering.
Sommer, Stefan Horst; Lauze, Francois Bernard; Nielsen, Mads
2011-01-01
In the LDDMM framework, optimal warps for image registration are found as end-points of critical paths for an energy functional, and the EPDiff equations describe the evolution along such paths. The Large Deformation Diffeomorphic Kernel Bundle Mapping (LDDKBM) extension of LDDMM allows scale space...
Sepe, D.
2013-01-01
The obstruction to construct a Lagrangian bundle over a fixed integral affine manifold was constructed by Dazord and Delzant (J Differ Geom 26:223–251, 1987) and shown to be given by ‘twisted’ cup products in Sepe (Differ GeomAppl 29(6): 787–800, 2011). This paper uses the topology of universal Lagr
Iosif DUMITRESCU
2015-05-01
Full Text Available In municipal solid waste, aluminum is the main nonferrous metal, approximately 80- 85% of the total nonferrous metals. The income per ton gained from aluminum recuperation is 20 times higher than from glass, steel boxes or paper recuperation. The object of this paper is the design of a 300 kN press for aluminum box bundling.
Mahesh Mohan
suggests that an epigenetic mechanism involving histone modifications may contribute to the massive decrease in gene expression at 90DPI leading to defects in enterocyte maturation and differentiation.
Bundled Slash: A Potential New Biomass Resource for Fuels and Chemicals
Steele, Philip H.; Mitchell, Brian K.; Cooper, Jerome E.; Arora, S.
Postharvest residues for southern pine species have not previously been quantified to compare volumes produced from both thinnings and clearcut volumes. A John Deere 1490 Slash Bundler bundled postharvest residues following a first thinning of a 14-year-old stand, a second thinning of a 25-year-old stand, and a clearcut of a naturally regenerated mature stand of 54 years of age. Regardless of stand type, nearly one-fifth of merchantable volume harvested was collected as postharvest residue. Initial bundle moisture contents were 127.3, 81.1, and 49.4% dry basis (db) for the first and second thinnings and mature stands, respectively. Bundle needles content was found to significantly influence the relative moisture contents of the bundles by stand type due to the high moisture content of needles compared to other bundle components. Bundles were stored outside and exposed to very hot and dry conditions and dried very rapidly to lowest moisture contents of 22.8, 14.5, and 13.5% (db) for first and second thinnings and mature stands, respectively. Response to moderating temperatures and higher precipitation resulted in rapid moisture content increase to 69.9, 46.2, and 38.1% (db) for the first and second thinnings and mature stand bundles by the end of the study. Temperature and precipitation and bundle percentage needles content all significantly influenced the rapid moisture content variations observed over the study periods.
Deformation quantization of principal bundles
Aschieri, Paolo
2016-01-01
We outline how Drinfeld twist deformation techniques can be applied to the deformation quantization of principal bundles into noncommutative principal bundles, and more in general to the deformation of Hopf-Galois extensions. First we twist deform the structure group in a quantum group, and this leads to a deformation of the fibers of the principal bundle. Next we twist deform a subgroup of the group of authomorphisms of the principal bundle, and this leads to a noncommutative base space. Considering both deformations we obtain noncommutative principal bundles with noncommutative fiber and base space as well.
Nichita, E., E-mail: Eleodor.Nichita@uoit.ca; Haroon, J., E-mail: Jawad.Haroon@uoit.ca
2016-10-15
Highlights: • A 37-element fuel bundle modified for {sup 99}Mo production in CANDU reactors is presented. • The modified bundle is neutronically and thermal-hydraulically equivalent to the standard bundle. • The modified bundle satisfies all safety criteria satisfied by the standard bundle. - Abstract: {sup 99m}Tc, the most commonly used radioisotope in diagnostic nuclear medicine, results from the radioactive decay of {sup 99}Mo which is currently being produced at various research reactors around the globe. In this study, the potential use of CANDU power reactors for the production of {sup 99}Mo is investigated. A modified 37-element fuel bundle, suitable for the production of {sup 99}Mo in existing CANDU-type reactors is proposed. The new bundle is specifically designed to be neutronically and thermal-hydraulically equivalent to the standard 37-element CANDU fuel bundle in normal, steady-state operation and, at the same time, be able to produce significant quantities of {sup 99}Mo when irradiated in a CANDU reactor. The proposed bundle design uses fuel pins consisting of a depleted-uranium centre surrounded by a thin layer of low-enriched uranium. The new molybdenum-producing bundle is analyzed using the lattice transport code DRAGON and the diffusion code DONJON. The proposed design is shown to produce 4081 six-day Curies of {sup 99}Mo activity per bundle when irradiated in the peak-power channel of a CANDU core, while maintaining the necessary reactivity and power rating limits. The calculated {sup 99}Mo yield corresponds to approximately one third of the world weekly demand. A production rate of ∼3 bundles per week can meet the global demand of {sup 99}Mo.
Rudakov, A N
1990-01-01
This volume is devoted to the use of helices as a method for studying exceptional vector bundles, an important and natural concept in algebraic geometry. The work arises out of a series of seminars organised in Moscow by A. N. Rudakov. The first article sets up the general machinery, and later ones explore its use in various contexts. As to be expected, the approach is concrete; the theory is considered for quadrics, ruled surfaces, K3 surfaces and P3(C).
Bundling harvester; Nippukorjausharvesteri
Koponen, K. [Eko-Log Oy, Kuopio (Finland)
1996-12-31
The staring point of the project was to design and construct, by taking the silvicultural point of view into account, a harvesting and processing system especially for energy-wood, containing manually driven bundling harvester, automatizing of the harvester, and automatized loading. The equipment forms an ideal method for entrepreneur`s-line harvesting. The target is to apply the system also for owner`s-line harvesting. The profitability of the system promotes the utilization of the system in both cases. The objectives of the project were: to construct a test equipment and prototypes for all the project stages, to carry out terrain and strain tests in order to examine the usability and durability, as well as the capacity of the machine, to test the applicability of the Eko-Log system in simultaneous harvesting of energy and pulp woods, and to start the marketing and manufacturing of the products. The basic problems of the construction of the bundling harvester have been solved using terrain-tests. The prototype machine has been shown to be operable. Loading of the bundles to form sufficiently economically transportable loads has been studied, and simultaneously, the branch-biomass has been tried to be utilized without loosing the profitability of transportation. The results have been promising, and will promote the profitable utilization of wood-energy
Coherent hollow-core waveguide bundles for thermal imaging.
Gal, Udi; Harrington, James; Ben-David, Moshe; Bledt, Carlos; Syzonenko, Nicholas; Gannot, Israel
2010-09-01
There has been very little work done in the past to extend the wavelength range of fiber image bundles to the IR range. This is due, in part, to the lack of IR transmissive fibers with optical and mechanical properties analogous to the oxide glass fibers currently employed in the visible fiber bundles. Our research is aimed at developing high-resolution hollow-core coherent IR fiber bundles for transendoscopic infrared imaging. We employ the hollow glass waveguide (HGW) technology that was used successfully to make single-HGWs with Ag/AgI thin film coatings to form coherent bundles for IR imaging. We examine the possibility of developing endoscopic systems to capture thermal images using hollow waveguide fiber bundles adjusted to the 8-10?mum spectral range and investigate the applicability of such systems. We carried out a series of measurements in order to characterize the optical properties of the fiber bundles. These included the attenuation, resolution, and temperature response. We developed theoretical models and simulation tools that calculate the light propagation through HGW bundles, and which can be used to calculate the optical properties of the fiber bundles. Finally, the HGW fiber bundles were used to transmit thermal images of various heated objects; the results were compared with simulation results. The experimental results are encouraging, show an improvement in the resolution and thermal response of the HGW fiber bundles, and are consistent with the theoretical results. Nonetheless, additional improvements in the attenuation of the bundles are required in order to be able to use this technology for medical applications.
A geometric approach to noncommutative principal torus bundles
Wagner, Stefan
2013-01-01
for noncommutative algebras and say that a dynamical system (A, 핋n,α) is called a noncommutative principal 핋n-bundle, if localization leads to a trivial noncommutative principal 핋n-bundle. We prove that this approach extends the classical theory of principal torus bundles and present a bunch of (nontrivial......A (smooth) dynamical system with transformation group 핋n is a triple (A, 핋n,α), consisting of a unital locally convex algebra A, the n-torus 핋n and a group homomorphism α:핋n→Aut(A), which induces a (smooth) continuous action of 핋n on A. In this paper, we present a new, geometrically oriented...... approach to the noncommutative geometry of principal torus bundles based on such dynamical systems. Our approach is inspired by the classical setting: In fact, after recalling the definition of a trivial noncommutative principal torus bundle, we introduce a convenient (smooth) localization method...
Superconductivity in an Inhomogeneous Bundle of Metallic and Semiconducting Nanotubes
Ilya Grigorenko
2013-01-01
Full Text Available Using Bogoliubov-de Gennes formalism for inhomogeneous systems, we have studied superconducting properties of a bundle of packed carbon nanotubes, making a triangular lattice in the bundle's transverse cross-section. The bundle consists of a mixture of metallic and doped semiconducting nanotubes, which have different critical transition temperatures. We investigate how a spatially averaged superconducting order parameter and the critical transition temperature depend on the fraction of the doped semiconducting carbon nanotubes in the bundle. Our simulations suggest that the superconductivity in the bundle will be suppressed when the fraction of the doped semiconducting carbon nanotubes will be less than 0.5, which is the percolation threshold for a two-dimensional triangular lattice.
Draper, Andrew
2011-04-01
Results of Medicare's ACE demonstration project and Geisinger Health System's ProvenCare initiative provide insight into the challenges hospitals will face as bundled payment proliferates. An early analysis of these results suggests that hospitals would benefit from bringing full automation using clinical IT tools to bear in their efforts to meet these challenges. Other important factors contributing to success include board and physician leadership, organizational structure, pricing methodology for bidding, evidence-based medical practice guidelines, supply cost management, process efficiency management, proactive and aggressive case management, business development and marketing strategy, and the financial management system.
Differential calculi on noncommutative bundles
Pflaum, Markus J.; Schauenburg, Peter
1996-01-01
We introduce a category of noncommutative bundles. To establish geometry in this category we construct suitable noncommutative differential calculi on these bundles and study their basic properties. Furthermore we define the notion of a connection with respect to a differential calculus and consider questions of existence and uniqueness. At the end these constructions are applied to basic examples of noncommutative bundles over a coquasitriangular Hopf algebra.
Nefness of adjoint bundles for ample vector bundles
Hidetoshi Maeda
1995-11-01
Full Text Available Let E be an ample vector bundle of rank >1 on a smooth complex projective variety X of dimension n. This paper gives a classification of pairs (X,E whose adjoint bundles K_X+det E are not nef in the case when r=n-2.
Bundle Security Protocol for ION
Burleigh, Scott C.; Birrane, Edward J.; Krupiarz, Christopher
2011-01-01
This software implements bundle authentication, conforming to the Delay-Tolerant Networking (DTN) Internet Draft on Bundle Security Protocol (BSP), for the Interplanetary Overlay Network (ION) implementation of DTN. This is the only implementation of BSP that is integrated with ION.
Friedman, R; Witten, Edward
1997-01-01
To understand in detail duality between heterotic string and F theory compactifications, it is important to understand the construction of holomorphic G bundles over elliptic Calabi-Yau manifolds, for various groups G. In this paper, we develop techniques to describe these bundles, and make several detailed comparisons between the heterotic string and F theory.
Friedman, Robert; Morgan, John; Witten, Edward
1997-01-01
To understand in detail duality between heterotic string and F theory compactifications, it is important to understand the construction of holomorphic G bundles over elliptic Calabi-Yau manifolds, for various groups G. In this paper, we develop techniques to describe the bundles, and make several detailed comparisons between the heterotic string and F theory.
Bundle Formation in Biomimetic Hydrogels
Jaspers, Maarten; Pape, A C H; Voets, Ilja K; Rowan, Alan E; Portale, Giuseppe; Kouwer, Paul H J
2016-01-01
Bundling of single polymer chains is a crucial process in the formation of biopolymer network gels that make up the extracellular matrix and the cytoskeleton. This bundled architecture leads to gels with distinctive properties, including a large-pore-size gel formation at very low concentrations and
Delayed hydride cracking properties of the endplate resistance welds of CANDU fuel bundles
Shek, G.K.; Wasiluk, B.S., E-mail: Gordon.Shek@kinectrics.com [Kinectrics Inc., Toronto, Ontario (Canada); Freire-Canosa, J. [Nuclear Waste Management Organization, Toronto, Ontario (Canada); Lampman, T. [AMEC NSS, Toronto, Ontario (Canada)
2010-07-01
In order to assess the susceptibility of CANDU fuel bundles endplate resistance welds to Delayed Hydride Cracking (DHC) during long term dry storage, the threshold stress intensity factor (KIH) and crack velocity of DHC in endplate welds of three unirradiated fuel bundles were determined. The three bundles tested covered the 28-element and 37-element designs and two Canadian manufacturers. The range of KIH values and DHC velocities obtained from the endplate welds of the three bundles are consistent with previous results obtained from a 37-element bundle produced by one of the manufacturers. (author)
Fiber bundle phase conjugate mirror
Ward, Benjamin G.
2012-05-01
An improved method and apparatus for passively conjugating the phases of a distorted wavefronts resulting from optical phase mismatch between elements of a fiber laser array are disclosed. A method for passively conjugating a distorted wavefront comprises the steps of: multiplexing a plurality of probe fibers and a bundle pump fiber in a fiber bundle array; passing the multiplexed output from the fiber bundle array through a collimating lens and into one portion of a non-linear medium; passing the output from a pump collection fiber through a focusing lens and into another portion of the non-linear medium so that the output from the pump collection fiber mixes with the multiplexed output from the fiber bundle; adjusting one or more degrees of freedom of one or more of the fiber bundle array, the collimating lens, the focusing lens, the non-linear medium, or the pump collection fiber to produce a standing wave in the non-linear medium.
Twisted Vector Bundles on Pointed Nodal Curves
Ivan Kausz
2005-05-01
Motivated by the quest for a good compactification of the moduli space of -bundles on a nodal curve we establish a striking relationship between Abramovich’s and Vistoli’s twisted bundles and Gieseker vector bundles.
Identity-Based Cryptosystems for Enhanced Deployment of OSGi Bundles
Parrend, Pierre; Galice, Samuel; Frénot, Stéphane; Ubéda, Stéphane
2007-01-01
International audience; The OSGi platform is designed to make Java soft- ware extensible at runtime. This undeniably presents a great interest in several domains like embedded plat- forms or enterprise application servers. However, se- curing the deployment of the OSGi components, or bundles, proves to be a major challenge. The current approach consists in digitally signing the bundles and certifying the signature through a Public Key Infras- tructure. We propose to replace this technology wi...
Semiflexible Biopolymers in Bundled Arrangements
Jörg Schnauß
2016-07-01
Full Text Available Bundles and networks of semiflexible biopolymers are key elements in cells, lending them mechanical integrity while also enabling dynamic functions. Networks have been the subject of many studies, revealing a variety of fundamental characteristics often determined via bulk measurements. Although bundles are equally important in biological systems, they have garnered much less scientific attention since they have to be probed on the mesoscopic scale. Here, we review theoretical as well as experimental approaches, which mainly employ the naturally occurring biopolymer actin, to highlight the principles behind these structures on the single bundle level.
Evaluating big deal journal bundles.
Bergstrom, Theodore C; Courant, Paul N; McAfee, R Preston; Williams, Michael A
2014-07-01
Large commercial publishers sell bundled online subscriptions to their entire list of academic journals at prices significantly lower than the sum of their á la carte prices. Bundle prices differ drastically between institutions, but they are not publicly posted. The data that we have collected enable us to compare the bundle prices charged by commercial publishers with those of nonprofit societies and to examine the types of price discrimination practiced by commercial and nonprofit journal publishers. This information is of interest to economists who study monopolist pricing, librarians interested in making efficient use of library budgets, and scholars who are interested in the availability of the work that they publish.
Stable extensions by line bundles
Teixidor-i-Bigas, M
1997-01-01
Let C be an algebraic curve of genus g. Consider extensions E of a vector bundle F'' of rank n'' by a vector bundle F' of rank n'. The following statement was conjectured by Lange: If 0
The Atiyah Bundle and Connections on a Principal Bundle
Indranil Biswas
2010-06-01
Let be a ∞ manifold and a Lie a group. Let $E_G$ be a ∞ principal -bundle over . There is a fiber bundle $\\mathcal{C}(E_G)$ over whose smooth sections correspond to the connections on $E_G$. The pull back of $E_G$ to $\\mathcal{C}(E_G)$ has a tautological connection. We investigate the curvature of this tautological connection.
Risum, Niels; Strauss, David; Sogaard, Peter
2013-01-01
The relationship between myocardial electrical activation by electrocardiogram (ECG) and mechanical contraction by echocardiography in left bundle-branch block (LBBB) has never been clearly demonstrated. New strict criteria for LBBB based on a fundamental understanding of physiology have recently...
Bundling ecosystem services in Denmark
Turner, Katrine Grace; Odgaard, Mette Vestergaard; Bøcher, Peder Klith;
2014-01-01
We made a spatial analysis of 11 ecosystem services at a 10 km × 10 km grid scale covering most of Denmark. Our objective was to describe their spatial distribution and interactions and also to analyze whether they formed specific bundle types on a regional scale in the Danish cultural landscape....... We found clustered distribution patterns of ecosystem services across the country. There was a significant tendency for trade-offs between on the one hand cultural and regulating services and on the other provisioning services, and we also found the potential of regulating and cultural services...... to form synergies. We identified six distinct ecosystem service bundle types, indicating multiple interactions at a landscape level. The bundle types showed specialized areas of agricultural production, high provision of cultural services at the coasts, multifunctional mixed-use bundle types around urban...
Risum, Niels; Strauss, David; Sogaard, Peter;
2013-01-01
The relationship between myocardial electrical activation by electrocardiogram (ECG) and mechanical contraction by echocardiography in left bundle-branch block (LBBB) has never been clearly demonstrated. New strict criteria for LBBB based on a fundamental understanding of physiology have recently...
Vector bundles on toric varieties
Gharib, Saman
2011-01-01
Following Sam Payne's work, we study the existence problem of nontrivial vector bundles on toric varieties. The first result we prove is that every complete fan admits a nontrivial conewise linear multivalued function. Such functions could potentially be the Chern classes of toric vector bundles. Then we use the results of Corti\\~nas, Haesemeyer, Walker and Weibel to show that the (non-equivariant) Grothendieck group of the toric 3-fold studied by Payne is large, so the variety has a nontrivial vector bundle. Using the same computation, we show that every toric 3-fold X either has a nontrivial line bundle, or there is a finite surjective toric morphism from Y to X, such that Y has a large Grothendieck group.
Fabrication of electrospun nanofibers bundles
Ye, Junjun; Sun, Daoheng
2007-12-01
Aligned nanofibers, filament bundle composed of large number of nanofibers have potential applications such as bio-material, composite material etc. A series of electrospinning experiments have been conducted to investigate the electrospinning process,in which some parameters such as polymer solution concentration, bias voltage, distance between spinneret and collector, solution flow rate etc have been setup to do the experiment of nanofibers bundles construction. This work firstly reports electrospun nanofiber bundle through non-uniform electrical field, and nanofibers distributed in different density on electrodes from that between them. Thinner nanofibers bundle with a few numbers of nanofiber is collected for 3 seconds; therefore it's also possible that the addressable single nanofiber could be collected to bridge two electrodes.
Reconnection of superfluid vortex bundles.
Alamri, Sultan Z; Youd, Anthony J; Barenghi, Carlo F
2008-11-21
Using the vortex filament model and the Gross-Pitaevskii nonlinear Schroedinger equation, we show that bundles of quantized vortex lines in He II are structurally robust and can reconnect with each other maintaining their identity. We discuss vortex stretching in superfluid turbulence and show that, during the bundle reconnection process, kelvin waves of large amplitude are generated, in agreement with the finding that helicity is produced by nearly singular vortex interactions in classical Euler flows.
Characterization of midrib vascular bundles of selected medicinal species in Rubiaceae
Nurul-Syahirah, M.; Noraini, T.; Latiff, A.
2016-11-01
An anatomical study was carried out on mature leaves of five selected medicinal species of Rubiaceae from Peninsular Malaysia. The chosen medicinal species were Aidia densiflora, Aidia racemosa, Chasallia chartacea, Hedyotis auricularia and Ixora grandifolia. The objective of this study is to determine the taxonomic value of midrib anatomical characteristics. Leaves samples were collected from Taman Paku Pakis, Universiti Kebangsaan Malaysia, Bangi, Selangor and Kledang Saiong Forest Reserve, Perak, Malaysia. Leaves samples then were fixed in spirit and acetic acid (3:1), the midrib parts then were sectioned using sliding microtome, cleared using Clorox, stained in Safranin and Alcian blue, mounted in Euparal and were observed under light microscope. Findings in this study have shown all species have collateral bundles. The midrib vascular bundles characteristics that can be used as tool to differentiate between species or genus are vascular bundles system (opened or closed), shape and arrangement of main vascular bundles, presence of both additional and medullary vascular bundles, position of additional vascular bundles, shape of medullary vascular bundles, presence of sclerenchyma cells ensheathed the vascular bundles. As a conclusion, midrib anatomical characteristics can be used to identify and discriminate medicinal plants species studied in the Rubiaceae.
Bundle Formation in Biomimetic Hydrogels.
Jaspers, Maarten; Pape, A C H; Voets, Ilja K; Rowan, Alan E; Portale, Giuseppe; Kouwer, Paul H J
2016-08-08
Bundling of single polymer chains is a crucial process in the formation of biopolymer network gels that make up the extracellular matrix and the cytoskeleton. This bundled architecture leads to gels with distinctive properties, including a large-pore-size gel formation at very low concentrations and mechanical responsiveness through nonlinear mechanics, properties that are rarely observed in synthetic hydrogels. Using small-angle X-ray scattering (SAXS), we study the bundle formation and hydrogelation process of polyisocyanide gels, a synthetic material that uniquely mimics the structure and mechanics of biogels. We show how the structure of the material changes at the (thermally induced) gelation point and how factors such as concentration and polymer length determine the architecture, and with that, the mechanical properties. The correlation of the gel mechanics and the structural parameters obtained from SAXS experiments is essential in the design of future (synthetic) mimics of biopolymer networks.
The Family Problem: Hints from Heterotic Line Bundle Models
Constantin, Andrei; Mishra, Challenger
2015-01-01
Within the class of heterotic line bundle models, we argue that N=1 vacua which lead to a small number of low-energy chiral families are preferred. By imposing an upper limit on the volume of the internal manifold, as required in order to obtain finite values of the four-dimensional gauge couplings, and validity of the supergravity approximation we show that, for a given manifold, only a finite number of line bundle sums are consistent with supersymmetry. By explicitly scanning over this finite set of line bundle models on certain manifolds we show that, for a sufficiently small volume of the internal manifold, the family number distribution peaks at small values, consistent with three chiral families. The relation between the maximal number of families and the gauge coupling is discussed, which hints towards a possible explanation of the family problem.
Principal bundles the classical case
Sontz, Stephen Bruce
2015-01-01
This introductory graduate level text provides a relatively quick path to a special topic in classical differential geometry: principal bundles. While the topic of principal bundles in differential geometry has become classic, even standard, material in the modern graduate mathematics curriculum, the unique approach taken in this text presents the material in a way that is intuitive for both students of mathematics and of physics. The goal of this book is to present important, modern geometric ideas in a form readily accessible to students and researchers in both the physics and mathematics communities, providing each with an understanding and appreciation of the language and ideas of the other.
Formation and Dissociation of Sperm Bundles in Monotremes.
Nixon, Brett; Ecroyd, Heath; Dacheux, Jean-Louis; Dacheux, Francoise; Labas, Valerie; Johnston, Steve D; Jones, Russell C
2016-10-01
Because monotremes are the earliest offshoot of the mammalian lineage, the platypus and short-beaked echidna were studied as model animals to assess the origin and biological significance of adaptations considered unique to therian mammals: epididymal sperm maturation and subsequent capacitation. We show that spermatozoa from both species assemble into bundles of approximately 100 cells during passage through the epididymis and that an epididymal protein-secreted protein, acidic, cysteine-rich (osteonectin; SPARC)-is involved in bundle formation. The bundles persisted during incubation in vitro for at least 1 h under conditions that capacitate therian spermatozoa, and then underwent a time-dependent dissociation to release spermatozoa capable of fertilization. Only after this dissociation could the spermatozoa bind to the perivitelline membrane of a hen's egg, display an altered form of motility reminiscent of hyperactivation, and be induced to undergo an acrosome reaction. It is concluded that the development of sperm bundles in the monotreme epididymis mandates that they require a time-dependent process to be capable of fertilizing an ovum. However, because this functional end point was achieved without overt changes in protein tyrosine phosphorylation (a hallmark of capacitation in therians), it is concluded that the process in monotremes is distinctly different from capacitation in therian mammals. © 2016 by the Society for the Study of Reproduction, Inc.
Line bundles and flat connections
INDRANIL BISWAS; GEORG SCHUMACHER
2017-06-01
We prove that there are cocompact lattices $\\Gamma$ in $\\rm SL(2,\\mathbb C)$ with the property that there are holomorphic line bundles $L$ on $\\rm SL(2,\\mathbb C)/ \\Gamma$ with $c_{1}(L) = 0$ such that $L$ does not admit any unitary flat connection.
Vector Bundles over Elliptic Fibrations
Friedman, R; Witten, Edward; Friedman, Robert; Morgan, John W.; Witten, Edward
1997-01-01
This paper gives various methods for constructing vector bundles over elliptic curves and more generally over families of elliptic curves. We construct universal families over generalized elliptic curves via spectral cover methods and also by extensions, and then give a relative version of the construction in families. We give various examples and make Chern class computations.
Quantum principal bundles and corresponding gauge theories
Durdevic, M
1995-01-01
A generalization of classical gauge theory is presented, in the framework of a noncommutative-geometric formalism of quantum principal bundles over smooth manifolds. Quantum counterparts of classical gauge bundles, and classical gauge transformations, are introduced and investigated. A natural differential calculus on quantum gauge bundles is constructed and analyzed. Kinematical and dynamical properties of corresponding gauge theories are discussed.
Strategic and welfare implications of bundling
Martin, Stephen
1999-01-01
A standard oligopoly model of bundling shows that bundling by a firm with a monopoly over one product has a strategic effect because it changes the substitution relationships between the goods among which consumers choose. Bundling in appropriate proportions is privately profitable, reduces rival......' profits and overall welfare, and may drive rivals from the market...
Ecosystem service bundles for analyzing tradeoffs in diverse landscapes
Raudsepp-Hearne, C.; Peterson, G. D.; Bennett, E. M.
2010-01-01
A key challenge of ecosystem management is determining how to manage multiple ecosystem services across landscapes. Enhancing important provisioning ecosystem services, such as food and timber, often leads to tradeoffs between regulating and cultural ecosystem services, such as nutrient cycling, flood protection, and tourism. We developed a framework for analyzing the provision of multiple ecosystem services across landscapes and present an empirical demonstration of ecosystem service bundles, sets of services that appear together repeatedly. Ecosystem service bundles were identified by analyzing the spatial patterns of 12 ecosystem services in a mixed-use landscape consisting of 137 municipalities in Quebec, Canada. We identified six types of ecosystem service bundles and were able to link these bundles to areas on the landscape characterized by distinct social–ecological dynamics. Our results show landscape-scale tradeoffs between provisioning and almost all regulating and cultural ecosystem services, and they show that a greater diversity of ecosystem services is positively correlated with the provision of regulating ecosystem services. Ecosystem service-bundle analysis can identify areas on a landscape where ecosystem management has produced exceptionally desirable or undesirable sets of ecosystem services. PMID:20194739
Lesson Eleven Transient and intermittent left bundle branch block
鲁端; 王劲
2004-01-01
@@ In transient left bundle branch block,normal intraventricular conduction subsequently returns,if only1temporarily.The condition has also been called paroxysmal,unstable,or temporary left bundle branch block. Its etiology is similar to that of the stable variety2, with the great majority of the patients having ischemic or hypertensive heart disease or both. Transient bundle branch block may complicate acute myocardial infarction or may occur during attacks of angina. It may appear during an episode of congestive heart failure and disappear with improvement of the cardiac status. Most patients eventually develop permanent block. Occasionally,however, the patient may revert to normal conduction even years after consistently demonstrating the block.
Heat Transfer Modeling of Staggered Bundle with Round Tubes Screened by Mesh
Dymo B.V.
2016-04-01
Full Text Available The article presents the results of CFD modeling of heat transfer and aerodynamic drag for the first three rows of cross-flowed staggered bundle consisting of round tubes screened by wire mesh. Geometric model of this bundle was developed. Selection of optimal parameters of the bundle finite element model realizes on the base of transition shear stress transport model. Two separate geometric models for even and odd rows of bundle have been elaborated for the scope of computational resources optimization. The results of numerical modeling of heat transfer for the first three rows of the bundle were approximated with the criteria dependences. It has been established that heat transfer stabilization occurs from the second row of the bundle. Stabilized heat transfer is 15 % higher than that for the first row of the bundle and 1.2 … 1.7 times as large in comparison with equivalent bare-tube bundle in a range of Reynolds number from 5000 to 35000. Aerodynamic drag data for the first three rows of the bundle have been obtained.
Higher order jet prolongations type gauge natural bundles over vector bundles
Jan Kurek
2004-05-01
Full Text Available Let $rgeq 3$ and $mgeq 2$ be natural numbers and $E$ be a vector bundle with $m$-dimensional basis. We find all gauge natural bundles ``similar" to the $r$-jet prolongation bundle $J^rE$ of $E$. We also find all gauge natural bundles ``similar" to the vector $r$-tangent bundle $(J^r_{fl}(E,R_0^*$ of $E$.
Putting Consistent Theories Together in Institutions
应明生
1995-01-01
The problem of putting consistent theories together in institutions is discussed.A general necessary condition for consistency of the resulting theory is carried out,and some sufficient conditions are given for diagrams of theories in which shapes are tree bundles or directed graphs.Moreover,some transformations from complicated cases to simple ones are established.
Multipath packet switch using packet bundling
Berger, Michael Stubert
2002-01-01
The basic concept of packet bundling is to group smaller packets into larger packets based on, e.g., quality of service or destination within the packet switch. This paper presents novel applications of bundling in packet switching. The larger packets created by bundling are utilized to extend...... switching capacity by use of parallel switch planes. During the bundling operation, packets will experience a delay that depends on the actual implementation of the bundling and scheduling scheme. Analytical results for delay bounds and buffer size requirements are presented for a specific scheduling...
Development boiling to sprinkled tube bundle
Kracík Petr
2016-01-01
Full Text Available This paper presents results of a studied heat transfer coefficient at the surface of a sprinkled tube bundle where boiling occurs. Research in the area of sprinkled exchangers can be divided into two major parts. The first part is research on heat transfer and determination of the heat transfer coefficient at sprinkled tube bundles for various liquids, whether boiling or not. The second part is testing of sprinkle modes for various tube diameters, tube pitches and tube materials and determination of individual modes’ interface. All results published so far for water as the falling film liquid apply to one to three tubes for which the mentioned relations studied are determined in rigid laboratory conditions defined strictly in advance. The sprinkled tubes were not viewed from the operational perspective where there are more tubes and various modes may occur in different parts with various heat transfer values. The article focuses on these processes. The tube is located in a low-pressure chamber where vacuum is generated using an exhauster via ejector. The tube consists of smooth copper tubes of 12 mm diameter placed horizontally one above another.
Development boiling to sprinkled tube bundle
Kracík, Petr; Pospíšil, Jiří
2016-03-01
This paper presents results of a studied heat transfer coefficient at the surface of a sprinkled tube bundle where boiling occurs. Research in the area of sprinkled exchangers can be divided into two major parts. The first part is research on heat transfer and determination of the heat transfer coefficient at sprinkled tube bundles for various liquids, whether boiling or not. The second part is testing of sprinkle modes for various tube diameters, tube pitches and tube materials and determination of individual modes' interface. All results published so far for water as the falling film liquid apply to one to three tubes for which the mentioned relations studied are determined in rigid laboratory conditions defined strictly in advance. The sprinkled tubes were not viewed from the operational perspective where there are more tubes and various modes may occur in different parts with various heat transfer values. The article focuses on these processes. The tube is located in a low-pressure chamber where vacuum is generated using an exhauster via ejector. The tube consists of smooth copper tubes of 12 mm diameter placed horizontally one above another.
Dimensional Measurements of Fresh CANDU Fuel Bundle
Jun, Ji Su; Jo, Chang Keun; Jung, Jong Yeob; Koo, Dae Seo; Cho, Moon Sung [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)
2005-07-01
This paper intends to provide the dimensional measurements of fresh CANDU fuel (37-element) bundle for the estimation of deformation of post-irradiated (PI) bundle. It is expensive and difficult to measure the fretting wear of bearing pad, the element bowing and the waviness of endplate at the two-phase high flow condition (above 24 kg/s) of out-of-reactor test. So, it is recommended to compare the geometry of fresh bundle with that of PI bundle to estimate the integrity of fuel bundle in the CANDU-6 fuel channel with two-phase flow condition. The measurement system has been developed to provide the visual inspection and the dimensional measurements within the accuracy of 10 {mu}m. It is applicable in-air and underwater to the CANDU bundle as well as the CANFLEX bundle. The in-air measurements of the 36 fresh CANDU bundles (S/N: B400892 {approx} B400927) are done by this system from February 2004 to March 2004 in the PHWR fresh fuel storage building of KNFC. These bundles are produced by KNFC manufacturing procedure and are waiting for the delivery to the Wolsong-3 plant, and are planned to load into the proposed test channels. The detail measurements contain the outer rod profile (including the bearing pad), the diameter of bundle, the bowing of bundle, the rod length and the surface profile of end plate (waviness)
Mathematical modelling for nanotube bundle oscillators
Thamwattana, Ngamta; Cox, Barry J.; Hill, James M.
2009-07-01
This paper investigates the mechanics of a gigahertz oscillator comprising a nanotube oscillating within the centre of a uniform concentric ring or bundle of nanotubes. The study is also extended to the oscillation of a fullerene inside a nanotube bundle. In particular, certain fullerene-nanotube bundle oscillators are studied, namely C60-carbon nanotube bundle, C60-boron nitride nanotube bundle, B36N36-carbon nanotube bundle and B36N36-boron nitride nanotube bundle. Using the Lennard-Jones potential and the continuum approach, we obtain a relation between the bundle radius and the radii of the nanotubes forming the bundle, as well as the optimum bundle size which gives rise to the maximum oscillatory frequency for both the fullerene and the nanotube bundle oscillators. While previous studies in this area have been undertaken through molecular dynamics simulations, this paper emphasizes the use of applied mathematical modelling techniques which provides considerable insight into the underlying mechanisms. The paper presents a synopsis of the major results derived in detail by the present authors in [1, 2].
Staunstrup, Jørgen
1998-01-01
This paper proposes that Interface Consistency is an important issue for the development of modular designs. Byproviding a precise specification of component interfaces it becomes possible to check that separately developedcomponents use a common interface in a coherent matter thus avoiding a very...... significant source of design errors. Awide range of interface specifications are possible, the simplest form is a syntactical check of parameter types.However, today it is possible to do more sophisticated forms involving semantic checks....
Bordin, Lorenzo; Creminelli, Paolo; Mirbabayi, Mehrdad; Noreña, Jorge
2017-03-01
We argue that isotropic scalar fluctuations in solid inflation are adiabatic in the super-horizon limit. During the solid phase this adiabatic mode has peculiar features: constant energy-density slices and comoving slices do not coincide, and their curvatures, parameterized respectively by ζ and Script R, both evolve in time. The existence of this adiabatic mode implies that Maldacena's squeezed limit consistency relation holds after angular average over the long mode. The correlation functions of a long-wavelength spherical scalar mode with several short scalar or tensor modes is fixed by the scaling behavior of the correlators of short modes, independently of the solid inflation action or dynamics of reheating.
Salek, R N; Černíková, M; Maděrová, S; Lapčík, L; Buňka, F
2016-05-01
The scope of this work was to investigate the dependence of selected textural (texture profile analysis, TPA) and viscoelastic properties of processed cheese on the composition of ternary mixtures of emulsifying salts [disodium hydrogenphosphate, DSP; tetrasodium diphosphate, TSPP; sodium salt of polyphosphate (with mean length n ≈ 20), P20; and trisodium citrate, TSC] during a 60-d storage period (6±2°C). The processed cheese samples [40% wt/wt dry matter (DM) content, 50% wt/wt fat in DM content] were manufactured using Swiss-type cheese (as the main raw material) with 4 different maturity degrees (4, 8, 12, and 16 wk of ripening). Moreover, the pH of the samples was adjusted (the target values within the range of 5.60-5.80), corresponding to the standard pH values of spreadable processed cheese. With respect to the individual application of emulsifying salts (regardless of the maturity degree of the Swiss-type cheese applied), the samples prepared with P20 were the hardest, followed by those prepared with TSPP, TSC, and DSP. Furthermore, a specific ratio of DSP:TSPP (1:1) led to a significant increase in the hardness of the samples. On the whole, the hardness of all processed cheese samples increased with the prolonging storage period, whereas their hardness significantly dropped with the rising ripening stage of the raw material utilized. In all of the cases, the trends of hardness development remained analogous, and only the absolute values differed significantly. Moreover, the findings of TPA were in accordance with those of the rheological analysis. In particular, the specific ratio of DSP:TSPP (1:1) resulted in the highest gel strength and interaction factor values, followed by P20, TSPP, TSC, and DSP (used individually), reporting the same trend which was demonstrated by TPA. The monitored values of the gel strength and interaction factor decreased with the increasing maturity degree of the Swiss-type cheese used. The intensity of the rigidity of the
Overview of flowline bundle technology from concept selection to offshore installation
Song Ruxin; Xia Qiuling
2013-01-01
Flowline bundle system consisting of carrier pipe,sleeve pipe and internal flowlines offers innovative solution for the infield transportation of oil and gas.Due to its features,flowline bundle offers a couple of advantages over conventional flowline in particular for cases where multi-flowlines and high thermal performance is of great interest.The main benefits and advantages of such system include excellent thermal performance to prevent wax formation and hydrates,multiple bundled flowlines,mechanical and corrosion protection,potential reuse,etc.With the developments of offshore oil and gas industries,more and more hydrocarbon resources are being explored and discovered from shallow to deep water.Pipeline bundle system can be a smart solution for certain applications,which can be safe and cost effective solution.The objective of this paper is to overview pipeline bundle technology,outline detailed engineering design issue and procedure.Focus is given to its potential application in offshore for infield transportation.Engineering design principles and procedures for pipeline bundle system are highlighted.Construction methods of flowline bundle onshore are reviewed.Offshore towing and installation of pipeline bundle procedure is outlined.
Guan-Yu Zheng
2014-01-01
Full Text Available Natural fiber bundle like hemp fiber bundle usually includes many small lumens embedded in solid region; thus, it can present lower thermal conduction than that of conventional fibers. In the paper, characteristic of anisotropic transverse thermal conductivity of unidirectional natural hemp fiber bundle was numerically studied to determine the dependence of overall thermal property of the fiber bundle on that of the solid region phase. In order to efficiently predict its thermal property, the fiber bundle was embedded into an imaginary matrix to form a unit composite cell consisting of the matrix and the fiber bundle. Equally, another unit composite cell including an equivalent solid fiber was established to present the homogenization of the fiber bundle. Next, finite element thermal analysis implemented by ABAQUS was conducted in the two established composite cells by applying proper thermal boundary conditions along the boundary of unit cell, and influences of the solid region phase and the equivalent solid fiber on the composites were investigated, respectively. Subsequently, an optional relationship of thermal conductivities of the natural fiber bundle and the solid region was obtained by curve fitting technique. Finally, numerical results from the obtained fitted curves were compared with the analytic Hasselman-Johnson’s results and others to verify the present numerical model.
Maturing interorganisational information systems
Plomp, M.G.A.
2012-01-01
This thesis consists of nine chapters, divided over five parts. PART I is an introduction and the last part contains the conclusions. The remaining, intermediate parts are: PART II: Developing a maturity model for chain digitisation. This part contains two related studies concerning the development
Maturing interorganisational information systems
Plomp, M.G.A.
2012-01-01
This thesis consists of nine chapters, divided over five parts. PART I is an introduction and the last part contains the conclusions. The remaining, intermediate parts are: PART II: Developing a maturity model for chain digitisation. This part contains two related studies concerning the development
General frame structures on quantum principal bundles
Durdevic, M
1996-01-01
A noncommutative-geometric generalization of the classical formalism of frame bundles is developed, incorporating into the theory of quantum principal bundles the concept of the Levi-Civita connection. The construction of a natural differential calculus on quantum principal frame bundles is presented, including the construction of the associated differential calculus on the structure group. General torsion operators are defined and analyzed. Illustrative examples are presented.
ACM Bundles on Del Pezzo surfaces
Joan Pons-Llopis
2009-11-01
Full Text Available ACM rank 1 bundles on del Pezzo surfaces are classified in terms of the rational normal curves that they contain. A complete list of ACM line bundles is provided. Moreover, for any del Pezzo surface X of degree less or equal than six and for any n ≥ 2 we construct a family of dimension ≥ n − 1 of non-isomorphic simple ACM bundles of rank n on X.
Entropy for frame bundle systems and Grassmann bundle systems induced by a diffeomorphism
SUN; Weniang(孙文祥)
2002-01-01
ALiao hyperbolic diffeomorphism has equal measure entropy and topological entropy to that ofits induced systems on frame bundles and Grassmann bundles. This solves a problem Liao posed in 1996 forLiao hyperbolic diffeomorphisms.
Thermal Hydraulic Performance of Tight Lattice Bundle
Yamamoto, Yasushi; Akiba, Miyuki; Morooka, Shinichi; Shirakawa, Kenetsu; Abe, Nobuaki
Recently, the reduced moderation spectrum BWR has been studied. The fast neutron spectrum is obtained through triangular tight lattice fuel. However, there are few thermal hydraulic test data and thermal hydraulic correlation applicable to critical power prediction in such a tight lattice bundle. This study aims to enhance the database of the thermal hydraulic performance of the tight lattice bundle whose rod gap is about 1mm. Therefore, thermal hydraulic performance measurement tests of tight lattice bundles for the critical power, the pressure drop and the counter current flow limiting were performed. Moreover, the correlations to evaluate the thermal-hydraulic performance of the tight lattice bundle were developed.
Principal $G$-bundles over elliptic curves
Friedman, R; Witten, Edward; Friedman, Robert; Morgan, John W.; Witten, Edward
1997-01-01
Let $G$ be a simple and simply connected complex Lie group. We discuss the moduli space of holomorphic semistable principal $G$-bundles over an elliptic curve $E$. In particular, we give a new proof of a theorem of Looijenga and Bernshtein-Shvartsman, that the moduli space is a weighted projective space. The method of proof is to study the deformations of certain unstable bundles coming from special maximal parabolic subgroups of $G$. We also discuss the associated automorphism sheaves and universal bundles, as well as the relation between various universal bundles and spectral covers.
Statistical Constitutive Equation of Aramid Fiber Bundles
熊杰; 顾伯洪; 王善元
2003-01-01
Tensile impact tests of aramid (Twaron) fiber bundles were carried om under high strain rates with a wide range of 0. 01/s～1000/s by using MTS and bar-bar tensile impact apparatus. Based on the statistical constitutive model of fiber bundles, statistical constitutive equations of aramid fiber bundles are derived from statistical analysis of test data at different strain rates. Comparison between the theoretical predictions and experimental data indicates statistical constitutive equations fit well with the experimental data, and statistical constitutive equations of fiber bundles at different strain rates are valid.
Jacobi Structures on Affine Bundles
J. GRABOWSKI; D. IGLESIAS; J. C. MARRERO; E. PADR(O)N; P. URBA(N)SKI
2007-01-01
We study affine Jacobi structures (brackets) on an affine bundle π: A→M, i.e. Jacobi brackets that close on affine functions. We prove that if the rank of A is non-zero, there is a one-to- one correspondence between affine Jacobi structures on A and Lie algebroid structures on the vector bundle A+=∪p∈M Aff(Ap, R) of affine functionals. In the case rank A = 0, it is shown that there is a one-to-one correspondence between affins Jacobi structures on A and local Lie algebras on A+. Some examples and applications, also for the linear case, are discussed. For a special type of affine Jacobi structures which are canonically exhibited (strongly-affine or affine-homogeneous Jacobi structures) over a real vector space of finite dimension, we describe the leaves of its characteristic foliation as the orbits of an affine representation. These afline Jacobi structures can be viewed as an analog of the Kostant-Arnold-LiouviUe linear Poisson structure on the dual space of a real finite-dimensional Lie algebra.
Dendritic bundles, minicolumns, columns, and cortical output units
Giorgio Innocenti
2010-03-01
Full Text Available The search for the fundamental building block of the cerebral cortex has highlighted three structures, perpendicular to the cortical surface: i columns of neurons with radially invariant response properties, e.g., receptive field position, sensory modality, stimulus orientation or direction, frequency tuning etc. ii minicolumns of radially aligned cell bodies and iii bundles, constituted by the apical dendrites of pyramidal neurons with cell bodies in different layers. The latter were described in detail, and sometimes quantitatively, in several species and areas. It was recently suggested that the dendritic bundles consist of apical dendrites belonging to neurons projecting their axons to specific targets. We review the concept above and suggest that another structural and computational unit of cerebral cortex is the cortical output unit (COU, i.e. an assembly of bundles of apical dendrites and their parent cell bodies including each of the outputs to distant cortical or subcortical structures, of a given cortical locus (area or part of an area. This somato-dendritic assembly receives inputs some of which are common to the whole assembly and determine its radially invariant response properties, others are specific to one or more dendritic bundles, and determine the specific response signature of neurons in the different cortical layers and projecting to different targets.
Fiber bundle model under fluid pressure
Amitrano, David; Girard, Lucas
2016-03-01
Internal fluid pressure often plays an important role in the rupture of brittle materials. This is a major concern for many engineering applications and for natural hazards. More specifically, the mechanisms through which fluid pressure, applied at a microscale, can enhance the failure at a macroscale and accelerate damage dynamics leading to failure remains unclear. Here we revisit the fiber bundle model by accounting for the effect of fluid under pressure that contributes to the global load supported by the fiber bundle. Fluid pressure is applied on the broken fibers, following Biot's theory. The statistical properties of damage avalanches and their evolution toward macrofailure are analyzed for a wide range of fluid pressures. The macroscopic strength of the new model appears to be strongly controlled by the action of the fluid, particularly when the fluid pressure becomes comparable with the fiber strength. The behavior remains consistent with continuous transition, i.e., second order, including for large pressure. The main change concerns the damage acceleration toward the failure that is well modeled by the concept of sweeping of an instability. When pressure is increased, the exponent β characterizing the power-law distribution avalanche sizes significantly decreases and the exponent γ characterizing the cutoff divergence when failure is approached significantly increases. This proves that fluid pressure plays a key role in failure process acting as destabilization factor. This indicates that macrofailure occurs more readily under fluid pressure, with a behavior that becomes progressively unstable as fluid pressure increases. This may have considerable consequences on our ability to forecast failure when fluid pressure is acting.
Subchannel thermal-hydraulic modeling of an APT tungsten target rod bundle
Hamm, L.L.; Shadday, M.A. Jr.
1997-09-01
The planned target for the Accelerator Production of Tritium (APT) neutron source consists of an array of tungsten rod bundles through which D{sub 2}O coolant flows axially. Here, a scoping analysis of flow through an APT target rod bundle was conducted to demonstrate that lateral cross-flows are important, and therefore subchannel modeling is necessary to accurately predict thermal-hydraulic behavior under boiling conditions. A local reactor assembly code, FLOWTRAN, was modified to model axial flow along the rod bundle as flow through three concentric heated annular passages.
Miida, Yusuke; Matsuura, Yuji
2013-09-23
An all-optical 3D photoacoustic imaging probe that consists of an optical fiber probe for ultrasound detection and a bundle of hollow optical fibers for excitation of photoacoustic waves was developed. The fiber probe for ultrasound is based on a single-mode optical fiber with a thin polymer film attached to the output end surface that works as a Fabry Perot etalon. The input end of the hollow fiber bundle is aligned so that each fiber in the bundle is sequentially excited. A thin and flexible probe can be obtained because the probe system does not have a scanning mechanism at the distal end.
Principal Bundles on the Projective Line
V B Mehta; S Subramanian
2002-08-01
We classify principal -bundles on the projective line over an arbitrary field of characteristic ≠ 2 or 3, where is a reductive group. If such a bundle is trivial at a -rational point, then the structure group can be reduced to a maximal torus.
Anatomic Double-bundle ACL Reconstruction
V.M. Schreiber; C.F. van Eck; F.H. Fu
2010-01-01
Rupture of the anterior cruciate ligament (ACL) is one of the most frequent forms of knee trauma. The traditional surgical treatment for ACL rupture is single-bundle reconstruction. However, during the past few years there has been a shift in interest toward double-bundle reconstruction to closely r
The Verlinde formula for Higgs bundles
Andersen, Jørgen Ellegaard; Pei, Du
2016-01-01
We propose and prove the Verlinde formula for the quantization of the Higgs bundle moduli spaces and stacks for any simple and simply-connected group. This generalizes the equivariant Verlinde formula for the case of $SU(n)$ proposed previously by the second and third author. We further establish a Verlinde formula for the quantization of parabolic Higgs bundle moduli spaces and stacks.
Requirements for disordered actomyosin bundle contractility
Lenz, Martin
2011-01-01
Actomyosin contractility is essential for biological force generation, and is well understood in highly ordered structures such as striated muscle. In vitro experiments have shown that non-sarcomeric bundles comprised only of F-actin and myosin thick filaments can also display contractile behavior, which cannot be described by standard muscle models. Here we investigate the microscopic symmetries underlying this process in large non-sarcomeric bundles with long actin filaments. We prove that contractile behavior requires non-identical motors that generate large enough forces to probe the nonlinear elastic behavior of F-actin. A simple disordered bundle model demonstrates a contraction mechanism based on these assumptions and predicts realistic bundle deformations. Recent experimental observations of F-actin buckling in in vitro contractile bundles support our model.
Composite spinor bundles in gravitation theory
Sardanashvily, G
1995-01-01
In gravitation theory, the realistic fermion matter is described by spinor bundles associated with the cotangent bundle of a world manifold X. In this case, the Dirac operator can be introduced. There is the 1:1 correspondence between these spinor bundles and the tetrad gravitational fields represented by sections of the quotient \\Si of the linear frame bundle over X by the Lorentz group. The key point lies in the fact that different tetrad fields imply nonequivalent representations of cotangent vectors to X by the Dirac's matrices. It follows that a fermion field must be regarded only in a pair with a certain tetrad field. These pairs can be represented by sections of the composite spinor bundle S\\to\\Si\\to X where values of tetrad fields play the role of parameter coordinates, besides the familiar world coordinates.
Double Fell bundles and Spectral triples
Martins, Rachel A D
2007-01-01
As a natural and canonical extension of Kumjian's Fell bundles over groupoids \\cite{fbg}, we give a definition for a double Fell bundle (a double category) over a double groupoid. We show that finite dimensional double category Fell line bundles tensored with their dual with $S^o$-reality satisfy the finite real spectral triples axioms but not necessarily orientability. This means that these product bundles with noncommutative algebras can be regarded as noncommutative compact manifolds more general than real spectral triples as they are not necessarily orientable. By construction, they unify the noncommutative geometry axioms and hence provide an algebraic enveloping structure for finite spectral triples to give the Dirac operator $D$ new algebraic and geometric structures that are otherwise missing in the transition from Fredholm operator to Dirac operator. The Dirac operator in physical applications as a result becomes less ad hoc. The new noncommutative space we present is a complex line bundle over a dou...
Carbon nanotube bundles/polystyrene composites as high-performance flexible thermoelectric materials
Suemori, Kouji; Watanabe, Yuichi; Hoshino, Satoshi
2015-03-01
Lightweight and flexible thermoelectric devices consisting of carbon nanotube (CNT)-based materials have the potential to be used for the various applications, such as energy harvesting from the low-temperature waste heat that exists ubiquitously in living areas. Because high-performance CNT-based materials are crucial for the broad-ranging employment of CNT-based thermoelectric devices, considerable efforts are being made to improve the power-generation capability of CNT-based thermoelectric materials. Here, we report high-performance thermoelectric composites consisting of CNT bundles and polystyrene fabricated by a planetary ball milling-based dispersion technique, which allows for the direct dispersion of the CNT bundles within the polystyrene matrix without causing the disaggregation of the bundled CNTs into individual ones. The CNT-bundles/polystyrene composites reported here exhibit a power factor of 413 μW/K2.m.
On Harder–Narasimhan Reductions for Higgs Principal Bundles
Arijit Dey; R Parthasarathi
2005-05-01
The existence and uniqueness of – reduction for the Higgs principal bundles over nonsingular projective variety is shown. We also extend the notion of – reduction for (, )-bundles and ramified -bundles over a smooth curve.
Functional bundles of the medial patellofemoral ligament.
Kang, Hui Jun; Wang, Fei; Chen, Bai Cheng; Su, Yan Ling; Zhang, Zhan Chi; Yan, Chang Bao
2010-11-01
The purpose of this study was to explore the anatomy and evaluate the function of the medial patellofemoral ligament (MPFL). Anatomical dissection was performed on 12 fresh-frozen knee specimens. The MPFL is a condensation of capsular fibers, which originates at the medial femoral condyle. It runs transversely and inserts to the medial edge of the patella. With the landmark of the medial femur epicondyle (MFE), the femoral origination was located: just 8.90 ± 3.27 mm proximally and 13.47 ± 3.68 mm posteriorly to the MFE. The most interesting finding in present study was functional bundles of its patellar insertion. Approximately from the femoral origination point, fibers of the MPFL form two relatively concentrated fiber bundles: the inferior-straight bundle and the superior-oblique bundle. The whole length of each was 71.78 ± 5.51 and 73.67 ± 5.40 mm, respectively. The included angle between bundles was 15.1° ± 2.1°. Although the superior-oblique bundle and the inferior-straight bundle run on the patellar MPFL inferiorly and superiorly, respectively, as their name indicates, the two bundles are not entirely separated, which make MPFL one intact structure. The inferior-straight bundle is the main static soft tissue restraints where the superior-oblique bundle associated with vastus medialis obliquus (VMO) is to serve as the main dynamic soft tissue restraints. So this finding may provide the theoretical foundation for the anatomical reconstruction of the MPFL and shed lights on the future researchers.
Wael Ghonimi
2014-06-01
Full Text Available The current work was carried out to investigate the gross and microanatomical features of moderator bands (septomarginal trabecula in camel heart. Ten hearts were collected from healthy mature dromedary camels. Anatomically, the moderator bands were present in both right and left ventricles. In right ventricle, the walls had one muscular moderator band which was extended from the interventricular septum to the opposite ventricular wall especially to the papillary muscle. In left ventricle, there were two bands; one extended from the interventricular septum to the papillary muscles, and the other one was present in various places especially in the apex running as a thin thread-like band across the left ventricular wall. Histological examination revealed that the moderator band consisted of two major layers; the central (core myocardium and the peripheral endocardium, acting as band capsule. The myocardium had two bundles; the contractile cardiac muscle bundles and the Purkinje fiber bundles. The endocardium consisted of three layers; the endothelial layer of simple squamous epithelium, the subendothelial layer of loose connective tissue and the subendocardial layer, connecting the endocardium with the myocardium.
Volkov, Alexey N.; Salaway, Richard N.; Zhigilei, Leonid V.
2013-09-01
The propensity of carbon nanotubes (CNTs) to self-organize into continuous networks of bundles has direct implications for thermal transport properties of CNT network materials and defines the importance of clear understanding of the mechanisms and scaling laws governing the heat transfer within the primary building blocks of the network structures—close-packed bundles of CNTs. A comprehensive study of the thermal conductivity of CNT bundles is performed with a combination of non-equilibrium molecular dynamics (MD) simulations of heat transfer between adjacent CNTs and the intrinsic conductivity of CNTs in a bundle with a theoretical analysis that reveals the connections between the structure and thermal transport properties of CNT bundles. The results of MD simulations of heat transfer in CNT bundles consisting of up to 7 CNTs suggest that, contrary to the widespread notion of strongly reduced conductivity of CNTs in bundles, van der Waals interactions between defect-free well-aligned CNTs in a bundle have negligible effect on the intrinsic conductivity of the CNTs. The simulations of inter-tube heat conduction performed for partially overlapping parallel CNTs indicate that the conductance through the overlap region is proportional to the length of the overlap for CNTs and CNT-CNT overlaps longer than several tens of nm. Based on the predictions of the MD simulations, a mesoscopic-level model is developed and applied for theoretical analysis and numerical modeling of heat transfer in bundles consisting of CNTs with infinitely large and finite intrinsic thermal conductivities. The general scaling laws predicting the quadratic dependence of the bundle conductivity on the length of individual CNTs in the case when the thermal transport is controlled by the inter-tube conductance and the independence of the CNT length in another limiting case when the intrinsic conductivity of CNTs plays the dominant role are derived. An application of the scaling laws to bundles of
Heat transfer in a bundle cooled with supercritical Freon-12
Peiman, W.; Milner, A.; Pascoe, C.; Patel, H.; Richards, G.; Pioro, I., E-mail: wargha.peiman@mycampus.uoit.ca, E-mail: igor.pioro@uoit.ca [Univ. of Ontario Inst. of Tech., Faculty of Energy Systems and Nuclear Science, Oshawa, Ontario (Canada)
2010-07-01
This paper focuses on analyzing experimental data on Freon-12 at a supercritical pressure of 4.65 MPa. Experiments were conducted at the Institute of Physics and Power Engineering in Russia. The test section consisted of a pressure tube, ceramic inserts, a hexagonal flow tube and a vertical 7-element bundle installed inside the flow tube. The seven elements of the bundle were made of stainless steel and had an outer diameter of 9.5 mm and a heated length of one meter. Bulk-fluid temperature of the coolant at the inlet and the outlet of the test section and the temperature profile of the central heated element were recorded using thermocouples. For comparison, bulk-fluid, and sheath temperature profiles were calculated using various correlations and results were compared with the experimental values. (author)
Higgs bundles and the real symplectic group
Gothen, Peter B
2011-01-01
We give an overview of the work of Corlette, Donaldson, Hitchin and Simpson leading to the non-abelian Hodge theory correspondence between representations of the fundamental group of a surface and the moduli space of Higgs bundles. We then explain how this can be generalized to a correspondence between character varieties for representations of surface groups in real Lie groups G and the moduli space of G-Higgs bundles. Finally we survey recent joint work with Bradlow, Garc\\'ia-Prada and Mundet i Riera on the moduli space of maximal Sp(2n,R)-Higgs bundles.
Contractile Units in Disordered Actomyosin Bundles Arise from F-Actin Buckling
Lenz, Martin; Thoresen, Todd; Gardel, Margaret L.; Dinner, Aaron R.
2012-06-01
Bundles of filaments and motors are central to contractility in cells. The classic example is striated muscle, where actomyosin contractility is mediated by highly organized sarcomeres which act as fundamental contractile units. However, many contractile bundles in vivo and in vitro lack sarcomeric organization. Here we propose a model for how contractility can arise in bundles without sarcomeric organization and validate its predictions with experiments on a reconstituted system. In the model, internal stresses in frustrated arrangements of motors with diverse velocities cause filaments to buckle, leading to overall shortening. We describe the onset of buckling in the presence of stochastic motor head detachment and predict that buckling-induced contraction occurs in an intermediate range of motor densities. We then calculate the size of the “contractile units” associated with this process. Consistent with these results, our reconstituted actomyosin bundles show contraction at relatively high motor density, and we observe buckling at the predicted length scale.
Some recent developments in the theory of acoustic transmission in tube bundles
Heckl, Maria A.; Mulholland, L. S.
1995-01-01
A comprehensive theoretical model for acoustic transmission in a tube bundle is presented. The tube bundle is considered as a series of diffraction gratings. Each grating consists of periodically spaced cylindrical tubes which obey the equations of motion of a cylindrical shell. Fluid loading is included. The model can be used for numerical simulations to calculate the sound field at any point in a tube bundle. Various phenomena can be predicted which are of interest for the development of acoustic diagnostics in heat exchangers. These include diffraction of a plane incident wave into several directions, the occurrence of passing and stopping bands in the transmission spectrum, features specific to oblique waves and the effect of dissipative losses. Tube bundles with baffle plates are also examined. The validity of the theoretical model is confirmed by comparison with experimental results.
Contractile units in disordered actomyosin bundles arise from F-actin buckling
Lenz, Martin; Gardel, Margaret L; Dinner, Aaron R
2012-01-01
Bundles of filaments and motors are central to contractility in cells. The classic example is striated muscle, where actomyosin contractility is mediated by highly organized sarcomeres which act as fundamental contractile units. However, many contractile bundles in vivo and in vitro lack sarcomeric organization. Here we propose a model for how contractility can arise in actomyosin bundles without sarcomeric organization and validate its predictions with experiments on a reconstituted system. In the model, internal stresses in frustrated arrangements of motors with diverse velocities cause filaments to buckle, leading to overall shortening. We describe the onset of buckling in the presence of stochastic actin-myosin detachment and predict that buckling-induced contraction occurs in an intermediate range of motor densities. We then calculate the size of the "contractile units" associated with this process. Consistent with these results, our reconstituted actomyosin bundles contract at relatively high motor dens...
Noncommutative principal bundles through twist deformation
Aschieri, Paolo; Pagani, Chiara; Schenkel, Alexander
2016-01-01
We construct noncommutative principal bundles deforming principal bundles with a Drinfeld twist (2-cocycle). If the twist is associated with the structure group then we have a deformation of the fibers. If the twist is associated with the automorphism group of the principal bundle, then we obtain noncommutative deformations of the base space as well. Combining the two twist deformations we obtain noncommutative principal bundles with both noncommutative fibers and base space. More in general, the natural isomorphisms proving the equivalence of a closed monoidal category of modules and its twist related one are used to obtain new Hopf-Galois extensions as twists of Hopf-Galois extensions. A sheaf approach is also considered, and examples presented.
Design requirements of ACR-1000 fuel bundle
Gossain, D.; Reid, P. [Atomic Energy of Canada Limited, Mississauga, Ontario (Canada)
2008-07-01
The design process for ACR-1000 fuel bundle is being undertaken in accordance with the CSA standard N286.2. As an element of the process, the design requirements were established early in the design phase and compiled in the ACR-1000 Fuel Design Requirements (DR) document. The ACR-1000 fuel bundle design is being developed to meet these requirements. This paper discusses the sources for the requirements such as the ACR project requirements, the plant specifications and regulatory requirements. It also discusses considerations of reactor design decisions and operational decisions in establishing functional, performance, safety and other design requirements for the fuel bundle. The design requirements for the ACR-1000 fuel bundle are summarized and the relationship of the requirements to the plant states of Normal Operation, Anticipated Operational Occurrences (AOOs) and Design Basis Accidents (DBAs) are discussed. Structure of the document to capture all the requirements in addition to functional, performance and safety requirements is presented. (author)
Bundled Hybrid Offset Riser Global Strength Analysis
William C.Webster; Zhuang Kang; Wenzhou Liang; Youwei Kang; Liping Sun
2011-01-01
Bundled hybrid offset riser(BHOR)global strength analysis,which is more complex than single line offset riser global strength analysis,was carried out in this paper.At first,the equivalent theory is used to deal with BHOR,and then its global strength in manifold cases was analyzed,along with the use of a three-dimensional nonlinear time domain finite element program.So the max bending stress,max circumferential stress,and max axial stress in the BHOR bundle main section(BMS)were obtained,and the values of these three stresses in each riser were obtained through the "stress distribution method".Finally,the Max Von Mises stress in each riser was given and a check was made whether or not they met the demand.This paper provides a reference for strength analysis of the bundled hybrid offset riser and some other bundled pipelines.
Liquid Flow in Shaped Fiber Bundle
ZHANG Yan; WANG Hua-ping; CHEN Yue-hua
2006-01-01
By computation and comparison of the critical spreading coefficient parameter, it was found that shaped fiber bundle is better for wetting. Liquid-air interface tension of liquid arising the shaped fiber bundle body is considered as one critical factor besides liquid viscosity, inertia force and liquid-fiber interface tension. Experimental result simulation demonstrated that the liquid-air interface tension is correlated with the geometric size of the liquid arising in body, φ0 (x) and which is affected by the cross sectional shape of fiber and the radius of single fiber. The shaped fiber bundle model is introduced to investigate liquid flow in fiber assembly. The model is generated based on a random function for stochastic forming of fibers in bundle and it is necessary to combine this fundamental model with physical explanation for investigation of liquid flow in fiber assembly.
Dynamic bi-product bundle pricing problem
Rafiei Hamed
2014-01-01
Full Text Available This paper addresses bundle pricing problem of two products in a stochastic environment so as to maximize net profit of a retailer. In the considered problem, it is assumed that customers are received upon a Poisson distribution and their demands follow a bi-variant distribution function. Also, it is assumed that products are sold individually or in the form of a bundle, which are offered from an initial stock of the products. To tackle the problem, a stochastic dynamic program is developed in which optimum values of the initial stock and order quantities of every planning period are determined. Moreover, prices of the individual products and their bundle are optimized. Also, the proposed dynamic program tackles bundling/ unbundling decisions taken in every planning period. A numerical example of a two planning period horizon is considered to validate the proposed model.
YU Wei-dong; YAN Hao-jing; Ron Postle; Yang Shouren
2002-01-01
Due to the effects of samples and testing conditions on fibre-bundle tensile behaviour, it is necessary to investigate the relationships between experimental factors and tensile properties for the fibre-bumdle tensile tester (TENSOR). The effects of bundle sample preparation, fibre bundle mass and fibre alignment have been tested. The experimental results indicated that (1) the low damage in combing and no free-end fibres in the cut bundle are most important for the sample preparation; (2) the reasonable bundle mass is 400- 700tex, but the tensile properties measured should bemodified with the bundle mass because a small amount of bundle mass causes the scatter results, while the larger is the bundle mass, the more difficult to comb fibres parallel and to clamp fibre evenly; and (3) the fibre irregular arrangement forms a slack bundle resulting in interaction between fibres, which will affect the reproducibility and accuracy of the tensile testing.
A Geometric Approach to Noncommutative Principal Bundles
Wagner, Stefan
2011-01-01
From a geometrical point of view it is, so far, not sufficiently well understood what should be a "noncommutative principal bundle". Still, there is a well-developed abstract algebraic approach using the theory of Hopf algebras. An important handicap of this approach is the ignorance of topological and geometrical aspects. The aim of this thesis is to develop a geometrically oriented approach to the noncommutative geometry of principal bundles based on dynamical systems and the representation theory of the corresponding transformation group.
Supporting the Secure Deployment of OSGi Bundles
Parrend, Pierre; Frénot, Stéphane
2007-01-01
International audience; The OSGi platform is a lightweight management layer over a Java virtual machine that makes runtime extensi- bility and multi-application support possible in mobile and constraint environments. This powerfull capability opens a particular attack vector against mobile platforms: the in- stallation of malicious OSGi bundles. The first countermea- sure is the digital signature of the bundles. We developed a tool suite that supports the signature, the publication and the va...
Is It Complete Left Bundle Branch Block? Just Ablate the Right Bundle.
Ali, Hussam; Lupo, Pierpaolo; Foresti, Sara; De Ambroggi, Guido; Epicoco, Gianluca; Fundaliotis, Angelica; Cappato, Riccardo
2017-03-01
Complete left bundle branch block (LBBB) is established according to standard electrocardiographic criteria. However, functional LBBB may be rate-dependent or can perpetuate during tachycardia due to repetitive concealed retrograde penetration of impulses through the contralateral bundle "linking phenomenon." In this brief article, we present two patients with basal complete LBBB in whom ablating the right bundle unmasked the actual antegrade conduction capabilities of the left bundle. These cases highlight intriguing overlap between electrophysiological concepts of complete block, linking, extremely slow, and concealed conduction.
Fabrication of CANFLEX bundle kit for irradiation test in NRU
Cho, Moon Sung; Kwon, Hyuk Il; Ji, Chul Goo; Chang, Ho Il; Sim, Ki Seob; Suk, Ho Chun
1997-10-01
CANFLEX bundle kit was prepared at KAERI for the fabrication of complete bundle at AECL. Completed bundle will be used for irradiation test in NRU. Provisions in the `Quality Assurance Manual for HWR Fuel Projects,` `Manufacturing Plan` and `Quality Verification, Inspection and Test Plan` were implemented as appropriately for the preparation of CANFLEX kit. A set of CANFLEX kit consist of 43 fuel sheath of two different sizes with spacers, bearing pads and buttons attached, 2 pieces of end plates and 86 pieces of end caps with two different sizes. All the documents utilized as references for the fabrication such as drawings, specifications, operating instructions, QC instructions and supplier`s certificates are specified in this report. Especially, suppliers` certificates and inspection reports for the purchased material as well as KAERI`s inspection report are integrated as attachments to this report. Attached to this report are supplier`s certificates and KAERI inspection reports for the procured materials and KAERI QC inspection reports for tubes, pads, spacers, buttons, end caps, end plates and fuel sheath. (author). 37 refs.
"Bundle Data" Approach at GES DISC Targeting Natural Hazards
Shie, C. L.; Shen, S.; Kempler, S. J.
2015-12-01
Severe natural phenomena such as hurricane, volcano, blizzard, flood and drought have the potential to cause immeasurable property damages, great socioeconomic impact, and tragic loss of human life. From searching to assessing the "Big", i.e., massive and heterogeneous scientific data (particularly, satellite and model products) in order to investigate those natural hazards, it has, however, become a daunting task for Earth scientists and applications researchers, especially during recent decades. The NASA Goddard Earth Sciences Data and Information Service Center (GES DISC) has served "Big" Earth science data, and the pertinent valuable information and services to the aforementioned users of diverse communities for years. In order to help and guide our users to online readily (i.e., with a minimum effort) acquire their requested data from our enormous resource at GES DISC for studying their targeted hazard/event, we have thus initiated a "Bundle Data" approach in 2014, first targeting the hurricane event/topic. We have recently worked on new topics such as volcano and blizzard. The "bundle data" of a specific hazard/event is basically a sophisticated integrated data package consisting of a series of proper datasets containing a group of relevant ("knowledge-based") data variables readily accessible to users via a system-prearranged table linking those data variables to the proper datasets (URLs). This online approach has been developed by utilizing a few existing data services such as Mirador as search engine; Giovanni for visualization; and OPeNDAP for data access, etc. The online "Data Cookbook" site at GES DISC is the current host for the "bundle data". We are now also planning on developing an "Automated Virtual Collection Framework" that shall eventually accommodate the "bundle data", as well as further improve our management in "Big Data".
Bundle Data Approach at GES DISC Targeting Natural Hazards
Shie, Chung-Lin; Shen, Suhung; Kempler, Steven J.
2015-01-01
Severe natural phenomena such as hurricane, volcano, blizzard, flood and drought have the potential to cause immeasurable property damages, great socioeconomic impact, and tragic loss of human life. From searching to assessing the Big, i.e., massive and heterogeneous scientific data (particularly, satellite and model products) in order to investigate those natural hazards, it has, however, become a daunting task for Earth scientists and applications researchers, especially during recent decades. The NASA Goddard Earth Sciences Data and Information Service Center (GES DISC) has served Big Earth science data, and the pertinent valuable information and services to the aforementioned users of diverse communities for years. In order to help and guide our users to online readily (i.e., with a minimum effort) acquire their requested data from our enormous resource at GES DISC for studying their targeted hazard event, we have thus initiated a Bundle Data approach in 2014, first targeting the hurricane event topic. We have recently worked on new topics such as volcano and blizzard. The bundle data of a specific hazard event is basically a sophisticated integrated data package consisting of a series of proper datasets containing a group of relevant (knowledge--based) data variables readily accessible to users via a system-prearranged table linking those data variables to the proper datasets (URLs). This online approach has been developed by utilizing a few existing data services such as Mirador as search engine; Giovanni for visualization; and OPeNDAP for data access, etc. The online Data Cookbook site at GES DISC is the current host for the bundle data. We are now also planning on developing an Automated Virtual Collection Framework that shall eventually accommodate the bundle data, as well as further improve our management in Big Data.
Twisted Bundle on Noncommutative Space and U(1) Instanton
Ho, P M
2000-01-01
We study the notion of twisted bundles on noncommutative space. Due to theexistence of projective operators in the algebra of functions on thenoncommutative space, there are twisted bundles with non-constant dimension.The U(1) instanton solution of Nekrasov and Schwarz is such an example. As amathematical motivation for not excluding such bundles, we find gaugetransformations by which a bundle with constant dimension can be equivalent toa bundle with non-constant dimension.
Properties of the microcirculation in capillary bundles of rat spinotrapezius muscle fascia
Jacobitz, Frank; Engebrecht, Cheryn; Metzger, Ian; Porterfield, Colin
2006-11-01
Properties of the microcirculation in capillary bundles of rat spinotrapezius muscle fascia are investigated using microscope observations, empirical modeling, and numerical simulations. Capillary bundles consist of a network of feeding arterioles, draining venules, and capillary vessels. A dozen samples of muscle fascia tissue were prepared for microscope observation. The chosen method of preparation allows for the long-term preservation of the tissue samples for future studies. Capillary bundles are photographed under a microscope with 40x magnification. From the images, the microvasculature of the tissue samples is reconstructed. It was found, for example, that the distribution of vessel length in a capillary bundle follows a log-normal law. In addition to a statistical analysis of the vessel data, the network topology is used for numerical simulations of the flow in the capillary bundles. The numerical approach uses a sparse-matrix solver and it considers vessel elasticity and blood rheology. The numerical simulations show, for example, a strong pressure drop across the capillary vessels of the bundle.
Polarized targeting of L1-CAM regulates axonal and dendritic bundling in vitro.
Barry, Joshua; Gu, Yuanzheng; Gu, Chen
2010-11-01
Proper axonal and dendritic bundling is essential for the establishment of neuronal connections and the synchronization of synaptic inputs, respectively. Cell adhesion molecules of the L1-CAM (L1-cell adhesion molecule) family regulate axon guidance and fasciculation, neuron migration, dendrite morphology, and synaptic plasticity. It remains unclear how these molecules play so many different roles. Here we show that polarized axon-dendrite targeting of an avian L1-CAM protein, NgCAM (neuron-glia cell adhesion molecule), can regulate the switch of bundling of the two major compartments of rat hippocampal neurons. Using a new in-vitro model for studying neurite-neurite interactions, we found that expressed axonal NgCAM induced robust axonal bundling via the trans-homophilic interaction of immunoglobulin domains. Interestingly, dendritic bundling was induced by the dendritic targeting of NgCAM, caused by either deleting its fibronectin repeats or blocking activities of protein kinases. Consistent with the NgCAM results, expression of mouse L1-CAM also induced axonal bundling and blocking kinase activities disrupted its axonal targeting. Furthermore, the trans-homophilic interaction stabilized the bundle formation, probably through recruiting NgCAM proteins to contact sites and promoting guided axon outgrowth. Taken together, our results suggest that precise localization of L1-CAM is important for establishing proper cell-cell contacts in neural circuits.
Subdiffusion in hair bundle dynamics: The role of protein conformational fluctuations
Sharma, Rati; Cherayil, Binny J.
2012-12-01
The detection of sound signals in vertebrates involves a complex network of different mechano-sensory elements in the inner ear. An especially important element in this network is the hair bundle, an antenna-like array of stereocilia containing gated ion channels that operate under the control of one or more adaptation motors. Deflections of the hair bundle by sound vibrations or thermal fluctuations transiently open the ion channels, allowing the flow of ions through them, and producing an electrical signal in the process, eventually causing the sensation of hearing. Recent high frequency (0.1-10 kHz) measurements by Kozlov et al. [Proc. Natl. Acad. Sci. U.S.A. 109, 2896 (2012)], 10.1073/pnas.1121389109 of the power spectrum and the mean square displacement of the thermal fluctuations of the hair bundle suggest that in this regime the dynamics of the hair bundle are subdiffusive. This finding has been explained in terms of the simple Brownian motion of a filament connecting neighboring stereocilia (the tip link), which is modeled as a viscoelastic spring. In the present paper, the diffusive anomalies of the hair bundle are ascribed to tip link fluctuations that evolve by fractional Brownian motion, which originates in fractional Gaussian noise and is characterized by a power law memory. The predictions of this model for the power spectrum of the hair bundle and its mean square displacement are consistent with the experimental data and the known properties of the tip link.
The Moduli Space of Heterotic Line Bundle Models: a Case Study for the Tetra-Quadric
Buchbinder, Evgeny I; Lukas, Andre
2014-01-01
It has recently been realised that polystable, holomorphic sums of line bundles over smooth Calabi-Yau three-folds provide a fertile ground for heterotic model building. Large numbers of phenomenologically promising such models have been constructed for various classes of Calabi-Yau manifolds. In this paper we focus on a case study for the tetra-quadric - a Calabi-Yau hypersurface embedded in a product of four CP1 spaces. We address the question of finiteness of the class of consistent and physically viable line bundle models constructed on this manifold. Further, for a specific semi-realistic example, we explore the embedding of the line bundle sum into the larger moduli space of non-Abelian bundles, both by means of constructing specific polystable non-Abelian bundles and by turning on VEVs in the associated low-energy theory. In this context, we explore the fate of the Higgs doublets as we move in bundle moduli space. The non-Abelian compactifications thus constructed lead to SU(5) GUT models with an addit...
LWR nuclear fuel bundle data for use in fuel bundle handling
Weihermiller, W.B.; Allison, G.S.
1979-09-01
Although increasing numbers of spent light water reactor (LWR) fuel bundles are moved into storage, no handling equipment is set up to manipulate all of the various types of fuel bundles. This report summarizes fuel bundle information of interest to the designer of such handling equipment. Dimensional descriptions are included with discussions of assembly procedure and manufacturer provisions for handling equipment. No attempt is made to make a complete compilation of dimensional information; the number of fuel bundle designs and design revisions makes it impractical. Because the fuel bundle designs are so varied, any equipment intended for handling all types of bundles will have to be designed with flexibility in mind. Besides the ability to manipulate fuel bundles in space, handling equipment may be required to locate an external surface or to position a cutting operation to avoid breaking a fuel rod pressure boundary. Even with the most sophisticated and flexible handling equipment, some situations will require use of the manufacturers' as-built descriptions of individual fuel bundles.
Reduction of surgical site infections after implementation of a bundle of care.
Rogier M P H Crolla
Full Text Available BACKGROUND: Surgical Site Infections (SSI are relatively frequent complications after colorectal surgery and are associated with substantial morbidity and mortality. OBJECTIVE: Implementing a bundle of care and measuring the effects on the SSI rate. DESIGN: Prospective quasi experimental cohort study. METHODS: A prospective surveillance for SSI after colorectal surgery was performed in the Amphia Hospital, Breda, from January 1, 2008 until January 1, 2012. As part of a National patient safety initiative, a bundle of care consisting of 4 elements covering the surgical process was introduced in 2009. The elements of the bundle were perioperative antibiotic prophylaxis, hair removal before surgery, perioperative normothermia and discipline in the operating room. Bundle compliance was measured every 3 months in a random sample of surgical procedures. RESULTS: Bundle compliance improved significantly from an average of 10% in 2009 to 60% in 2011. 1537 colorectal procedures were performed during the study period and 300 SSI (19.5% occurred. SSI were associated with a prolonged length of stay (mean additional length of stay 18 days and a significantly higher 6 months mortality (Adjusted OR: 2.71, 95% confidence interval 1.76-4.18. Logistic regression showed a significant decrease of the SSI rate that paralleled the introduction of the bundle. The adjusted Odds ratio of the SSI rate was 36% lower in 2011 compared to 2008. CONCLUSION: The implementation of the bundle was associated with improved compliance over time and a 36% reduction of the SSI rate after adjustment for confounders. This makes the bundle an important tool to improve patient safety.
The histology of retinal nerve fiber layer bundles and bundle defects.
Radius, R L; Anderson, D R
1979-05-01
The fiber bundle striations recognized clinically in normal monkey eyes appear to be bundles of axons compartmentalized within glial tunnels formed by Müller's-cell processes, when viewed histologically. The dark boundaries that separate individual bundles are the broadened foot endings of these cells near the inner surface of the retina. Within one week after focal retinal photocoagulation, characteristic fundus changes could be seen in experimental eyes. In histologic sections of the involved retina, there was marked cystic degeneration of the retinal nerve fiber layer. Within one month, atrophy of distal axon segments was complete. With the drop-out of damaged axons and thinning of individual fiber bundles, retinal striations became less prominent. The resulting fundus picture in these experimental eyes is similar to fiber bundle defects that can be seen clinically in various neuro-ophthalmic disorders.
HLM fuel pin bundle experiments in the CIRCE pool facility
Martelli, Daniele, E-mail: daniele.martelli@ing.unipi.it [University of Pisa, Department of Civil and Industrial Engineering, Pisa (Italy); Forgione, Nicola [University of Pisa, Department of Civil and Industrial Engineering, Pisa (Italy); Di Piazza, Ivan; Tarantino, Mariano [Italian National Agency for New Technologies, Energy and Sustainable Economic Development, C.R. ENEA Brasimone (Italy)
2015-10-15
Highlights: • The experimental results represent the first set of values for LBE pool facility. • Heat transfer is investigated for a 37-pin electrical bundle cooled by LBE. • Experimental data are presented together with a detailed error analysis. • Nu is computed as a function of the Pe and compared with correlations. • Experimental Nu is about 25% lower than Nu derived from correlations. - Abstract: Since Lead-cooled Fast Reactors (LFR) have been conceptualized in the frame of GEN IV International Forum (GIF), great interest has focused on the development and testing of new technologies related to HLM nuclear reactors. In this frame the Integral Circulation Experiment (ICE) test section has been installed into the CIRCE pool facility and suitable experiments have been carried out aiming to fully investigate the heat transfer phenomena in grid spaced fuel pin bundles providing experimental data in support of European fast reactor development. In particular, the fuel pin bundle simulator (FPS) cooled by lead bismuth eutectic (LBE), has been conceived with a thermal power of about 1 MW and a uniform linear power up to 25 kW/m, relevant values for a LFR. It consists of 37 fuel pins (electrically simulated) placed on a hexagonal lattice with a pitch to diameter ratio of 1.8. The FPS was deeply instrumented by several thermocouples. In particular, two sections of the FPS were instrumented in order to evaluate the heat transfer coefficient along the bundle as well as the cladding temperature in different ranks of sub-channels. Nusselt number in the central sub-channel was therefore calculated as a function of the Peclet number and the obtained results were compared to Nusselt numbers obtained from convective heat transfer correlations available in literature on Heavy Liquid Metals (HLM). Results reported in the present work, represent the first set of experimental data concerning fuel pin bundle behaviour in a heavy liquid metal pool, both in forced and
Tangent bundle formulation of a charged gas
Sarbach, Olivier
2013-01-01
We discuss the relativistic kinetic theory for a simple, collisionless, charged gas propagating on an arbitrary curved spacetime geometry. Our general relativistic treatment is formulated on the tangent bundle of the spacetime manifold and takes advantage of its rich geometric structure. In particular, we point out the existence of a natural metric on the tangent bundle and illustrate its role for the development of the relativistic kinetic theory. This metric, combined with the electromagnetic field of the spacetime, yields an appropriate symplectic form on the tangent bundle. The Liouville vector field arises as the Hamiltonian vector field of a natural Hamiltonian. The latter also defines natural energy surfaces, called mass shells, which turn out to be smooth Lorentzian submanifolds. A simple, collisionless, charged gas is described by a distribution function which is defined on the mass shell and satisfies the Liouville equation. Suitable fibre integrals of the distribution function define observable fie...
Zhou, Qin; Ames, Peter; Parkinson, John S.
2009-01-01
SUMMARY To test the gearbox model of HAMP signaling in the E. coli serine receptor, Tsr, we generated a series of amino acid replacements at each residue of the AS1 and AS2 helices. The residues most critical for Tsr function defined hydrophobic packing faces consistent with a 4-helix bundle. Suppression patterns of helix lesions conformed to the the predicted packing layers in the bundle. Although the properties and patterns of most AS1 and AS2 lesions were consistent with both proposed gearbox structures, some mutational features specifically indicate the functional importance of an x-da bundle over an alternative a-d bundle. These genetic data suggest that HAMP signaling could simply involve changes in the stability of its x-da bundle. We propose that Tsr HAMP controls output signals by modulating destabilizing phase clashes between the AS2 helices and the adjoining kinase control helices. Our model further proposes that chemoeffectors regulate HAMP bundle stability through a control cable connection between the transmembrane segments and AS1 helices. Attractant stimuli, which cause inward piston displacements in chemoreceptors, should reduce cable tension, thereby stabilizing the HAMP bundle. This study shows how transmembrane signaling and HAMP input-output control could occur without the helix rotations central to the gearbox model. PMID:19656294
Classical Higgs fields on gauge gluon bundles
Palese Marcella
2016-01-01
Full Text Available Classical Higgs fields and related canonical conserved quantities are defined by invariant variational problems on suitably defined gauge gluon bundles. We consider Lagrangian field theories which are assumed to be invariant with respect to the action of a gauge-natural group. As an illustrative example we exploit the ‘gluon Lagrangian’, i.e. a Yang-Mills Lagrangian on the (1, 1-order gauge-natural bundle of SU(3-principal connections. The kernel of the gauge-natural Jacobi morphism for such a Lagrangian, by inducing a reductive split structure, canonically defines a ‘gluon classical Higgs field’.
Abelian conformal field theory and determinant bundles
Andersen, Jørgen Ellegaard; Ueno, K.
2007-01-01
Following [10], we study a so-called bc-ghost system of zero conformal dimension from the viewpoint of [14, 16]. We show that the ghost vacua construction results in holomorphic line bundles with connections over holomorphic families of curves. We prove that the curvature of these connections...... are up to a scale the same as the curvature of the connections constructed in [14, 16]. We study the sewing construction for nodal curves and its explicit relation to the constructed connections. Finally we construct preferred holomorphic sections of these line bundles and analyze their behaviour near...
Yubao Ma
2014-01-01
Full Text Available Purpose. The present study sought to determine the influences of single-bundle (SB, single-bundle augmentation (SBA, and double-bundle (DB reconstructions on balance ability and proprioceptive function. Methods. 67 patients who underwent a single- or double-bundle ACL reconstruction or a SBA using multistranded autologous hamstring tendons were included in this study with a 1-year follow-up. Body sway and knee kinesthesia (using the threshold to detect passive motion test (TTDPM were measured to indicate balance ability and proprioceptive function, respectively. Additionally, within-subject differences in anterior-posterior stability of the tibia and lower extremity muscle strength were evaluated before and after surgery. Results. At 6 and 12 months after surgery, DB reconstruction resulted in better balance and proprioceptive function than SB reconstruction (P<0.05. Although no significant difference was observed in balance ability or proprioceptive function between the SBA and DB reconstructions, knee stability was significantly better with SBA and DB reconstructions than SB reconstruction (P<0.05. No significant differences were found in quadriceps and hamstrings strength among the three reconstruction techniques. Conclusions. Our findings consider that joint stability, proprioceptive function, and balance ability were superior with SBA and DB reconstructions compared to SB reconstruction at 6 and 12 months after surgery.
Optimizing Arteriovenous Fistula Maturation
2009-01-01
Autogenous arteriovenous fistulas are the preferred vascular access in patients undergoing hemodialysis. Increasing fistula prevalence depends on increasing fistula placement, improving the maturation of fistula that fail to mature and enhancing the long-term patency of mature fistula. Percutaneous methods for optimizing arteriovenous fistula maturation will be reviewed.
Computations in intersection rings of flag bundles
Grayson, Daniel R; Stillman, Michael E
2012-01-01
Intersection rings of flag varieties and of isotropic flag varieties are generated by Chern classes of the tautological bundles modulo the relations coming from multiplicativity of total Chern classes. In this paper we describe the Groebner bases of the ideals of relations and give applications to computation of intersections, as implemented in Macaulay2.
Capacity efficiency of recovery request bundling
Ruepp, Sarah Renée; Dittmann, Lars; Berger, Michael Stübert
2010-01-01
This paper presents a comparison of recovery methods in terms of capacity efficiency. In particular, a method where recovery requests are bundled towards the destination (Shortcut Span Protection) is evaluated against traditional recovery methods. Our simulation results show that Shortcut Span...... Protection uses more capacity than the unbundled related methods, but this is compensated by easier control and management of the recovery actions....
η-Invariant and Flat Vector Bundles
无
2006-01-01
We present an alternate definition of the mod Z component of the AtiyahPatodi-Singer η invariant associated to (not necessary unitary) fiat vector bundles, which identifies explicitly its real and imaginary parts. This is done by combining a deformation of flat connections introduced in a previous paper with the analytic continuation procedure appearing in the original article of Atiyah, Parodi and Singer.
Lazarsfeld-Mukai bundles and applications
Aprodu, Marian
2012-01-01
We survey the development of the notion of Lazarsfeld-Mukai bundles together with various applications, from the classification of Mukai manifolds to Brill-Noether theory and syzygies of $K3$ sections. To see these techniques at work, we present a short proof of a result of M. Reid on the existence of elliptic pencils.
Meromorphic Higgs bundles And Related Geometries
Dalakov, Peter
2016-01-01
The present note is mostly a survey on the generalised Hitchin integrable system and moduli spaces of meromorphic Higgs bundles. We also fill minor gaps in the existing literature, outline a calculation of the infinitesimal period map and review briefly some related geometries.
Meromorphic Higgs bundles and related geometries
Dalakov, Peter
2016-11-01
The present note is mostly a survey on the generalised Hitchin integrable system and moduli spaces of meromorphic G-Higgs bundles. We also fill minor gaps in the existing literature, outline a calculation of the infinitesimal period map and review some related geometries.
The Hodge bundle on Hurwitz spaces
van der Geer, G.; Kouvidakis, A.
2011-01-01
In 2009 Kokotov, Korotkin and Zograf gave in [7] a formula for the class of the Hodge bundle on the Hurwitz space of admissible covers of genus g and degree d of the projective line. They gave an analytic proof of it. In this note we give an algebraic proof and an extension of the result.
Capacity efficiency of recovery request bundling
Ruepp, Sarah Renée; Dittmann, Lars; Berger, Michael Stübert
2010-01-01
This paper presents a comparison of recovery methods in terms of capacity efficiency. In particular, a method where recovery requests are bundled towards the destination (Shortcut Span Protection) is evaluated against traditional recovery methods. Our simulation results show that Shortcut Span...
Active Hair-Bundle Motility by the Vertebrate Hair Cell
Tinevez, J.-Y.; Martin, P.; Jülicher, F.
2009-02-01
The hair bundle is both a mechano-sensory antenna and a force generator that might help the vertebrate hair cell from the inner ear to amplify its responsiveness to small stimuli. To study active hair-bundle motility, we combined calcium iontophoresis with mechanical stimulation of single hair bundles from the bullfrog's sacculus. A hair bundle could oscillate spontaneously, or be quiescent but display non-monotonic movements in response to abrupt force steps. Extracellular calcium changes or static biases to the bundle's position at rest could affect the kinetics of bundle motion and evoke transitions between the different classes of motility. The calcium-dependent location of a bundle's operating point within its nonlinear force-displacement relation controlled the type of movements observed. A unified theoretical description, in which mechanical activity stems from myosin-based adaptation and electro-mechanical feedback by Ca2+, could account for the fast and slow manifestations of active hair-bundle motility.
LIULUOFEI
1996-01-01
The author proves several embedding theorems for finite covering maps,principal G-bundies into bundles.The main results are 1. Let π：E→X be a finite covering map, and X a connected locally path-connected paracompact space. If cat X≤k, then the finite covering space π:E→X can be embedded into the trivial real k-plane bundle. 2. Let π：E→X be a principal G-bundle over a paracompact space. If there exists a linera action of Gon F(F=R or C)and cat X≤k ,then π：E→X can be embedded into ξ1 … ξn for any F-vector bundles ξi,i=1,…k.
Nazem-Zadeh, Mohammad-Reza; Davoodi-Bojd, Esmaeil; Soltanian-Zadeh, Hamid
2011-01-01
To develop an automatic atlas-based method for segmentation of fiber bundles using High Angular Resolution Diffusion Imaging (HARDI) data. Quantitative evaluation of diffusion characteristics inside specific fiber bundles provides new insights into disease developments, evolutions, therapy effects, and surgical interventions. Most of previous segmentation methods use similarity measures and strategies that do not lead to accurate segmentation results. They also suffer from subjectivity of initial seeds and regions of interest (ROI) defined by operator. We propose a novel method that uses Spherical Harmonic Coefficients (SHC) of HARDI diffusion signals to compute Orientation Distribution Function (ODF) and to extract Principal Diffusion Directions (PDDs). The proposed method selects most collinear PDD of neighbors of each voxel. Then, based on SHC and selected PDD, a similarity measure is proposed and used as a speed function in the level set framework that segments fiber bundles. To automate the process, an atlas-based method is used to select initial seeds for fiber bundles. To generate data for evaluation of the proposed method, an artificial pattern consisting of three crossing bundles intersected by a circular bundle is created. Also, two normal controls are imaged by two different HARDI protocols. Segmentation results for different fiber bundles in simulated data and normal control data are presented. Influence of threshold selection on the proposed segmentation method is evaluated using Dice coefficient. Also, effect of increasing the number of gradient directions on accuracy of extracted PDDs is evaluated. The proposed segmentation method has advantages over previous methods especially those that use similarity measures based on diffusion tensor imaging (DTI) data. These advantages are achieved by proper propagation of a hyper-surface in fiber crossing areas without making assumptions about diffusivity profile and selection of initial seeds or ROI. Copyright
Interplanetary Overlay Network Bundle Protocol Implementation
Burleigh, Scott C.
2011-01-01
The Interplanetary Overlay Network (ION) system's BP package, an implementation of the Delay-Tolerant Networking (DTN) Bundle Protocol (BP) and supporting services, has been specifically designed to be suitable for use on deep-space robotic vehicles. Although the ION BP implementation is unique in its use of zero-copy objects for high performance, and in its use of resource-sensitive rate control, it is fully interoperable with other implementations of the BP specification (Internet RFC 5050). The ION BP implementation is built using the same software infrastructure that underlies the implementation of the CCSDS (Consultative Committee for Space Data Systems) File Delivery Protocol (CFDP) built into the flight software of Deep Impact. It is designed to minimize resource consumption, while maximizing operational robustness. For example, no dynamic allocation of system memory is required. Like all the other ION packages, ION's BP implementation is designed to port readily between Linux and Solaris (for easy development and for ground system operations) and VxWorks (for flight systems operations). The exact same source code is exercised in both environments. Initially included in the ION BP implementations are the following: libraries of functions used in constructing bundle forwarders and convergence-layer (CL) input and output adapters; a simple prototype bundle forwarder and associated CL adapters designed to run over an IPbased local area network; administrative tools for managing a simple DTN infrastructure built from these components; a background daemon process that silently destroys bundles whose time-to-live intervals have expired; a library of functions exposed to applications, enabling them to issue and receive data encapsulated in DTN bundles; and some simple applications that can be used for system checkout and benchmarking.
Bundling Revisited: Substitute Products and Inter-Firm Discounts
Armstrong, Mark
2011-01-01
This paper extends the standard model of bundling to allow products to be substitutes and for products to be supplied by separate sellers. Whether integrated or separate, firms have an incentive to introduce bundling discounts when demand for the bundle is elastic relative to demand for stand-alone products. When products are partial substitutes, this typically gives an integrated firm a greater incentive to offer a bundle discount (relative to the standard model with additive preferences), w...
Holomorphic Vector Bundle on Hopf Manifolds with Abelian Fundamental Groups
Xiang Yu ZHOU; Wei Ming LIU
2004-01-01
Let X be a Hopf manifolds with an Abelian fundamental group. E is a holomorphic vector bundle of rank r with trivial pull-back to W = Cn - {0}. We prove the existence of a non-vanishing section of L(×) E for some line bundle on X and study the vector bundles filtration structure of E. These generalize the results of D. Mall about structure theorem of such a vector bundle E.
Testing the BUNDLE Experiment for Microgravity Disturbance Characterization
Gattis, Christy; Engberg, Bob
2000-01-01
A primary objective of the International Space Station is to provide a premier facility for microgravity research. There are many disturbances on board the Station that can disturb the quality of the microgravity environment, including disturbances caused by both system and payload hardware. Disturbances within experiments themselves can also affect the quality of their own environment. The primary functions of the Bridgman Unidirectional Dendrites in Liquids Experiment (BUNDLE) are to melt, directionally solidify, and perform in-situ quench of metallic alloys, providing data to aid in understanding the effects of the microgravity environment on the characteristics of these processed metals. Quenching of the samples in the BUNDLE furnace is accomplished by rapidly introducing high pressure helium into the furnace chamber. This type of quench will induce sample vibrations which may be large enough to adversely affect sample quality. The primary objective of the test described in this presentation was to determine the acceleration imparted on the BUNDLE sample during helium quench. From this information, the science community can better assess whether this method of quench will allow them to obtain the data they need. Utilizing breadboard hardware, the sample quench sequence was conducted. Data was collected from accelerometers located on the breadboard hardware and inside the sample cartridge. The test data indicated that the maximum acceleration achieved by the sample was 0.325 g, which is much higher than the desired microgravity (10(exp -6) g) environment. However, this acceleration level occurred over a time period of less than 0.1 second. Because this time period is so short, there should be no detrimental effects to dendrite growth. This result was consistent with the observations of the experiment scientists, who are satisfied with the results of previous dendrite growth in this breadboard unit.
Differential positioning of chloroplasts in C4 mesophyll and bundle sheath cells.
Maai, Eri; Miyake, Hiroshi; Taniguchi, Mitsutaka
2011-08-01
Chloroplast photorelocation movement is extensively studied in C3 but not C4 plants. C4 plants have 2 types of photosynthetic cells: mesophyll and bundle sheath cells. Mesophyll chloroplasts are randomly distributed along cell walls, whereas bundle sheath chloroplasts are located close to the vascular tissues or mesophyll cells depending on the plant species. The cell-specific C 4 chloroplast arrangement is established during cell maturation, and is maintained throughout the life of the cell. However, only mesophyll chloroplasts can change their positions in response to environmental stresses. The migration pattern is unique to C4 plants and differs from that of C3 chloroplasts. In this mini-review, we highlight the cell-specific disposition of chloroplasts in C4 plants and discuss the possible physiological significances.
Yoo, Yon-Sik; Song, Si Young; Yang, Cheol Jung; Ha, Jong Mun; Kim, Yoon Sang
2016-01-01
Purpose The purpose of this study was to compare the clinical outcomes of arthroscopic anatomical double bundle (DB) anterior cruciate ligament (ACL) reconstruction with either selective anteromedial (AM) or posterolateral (PL) bundle reconstruction while preserving a relatively healthy ACL bundle. Materials and Methods The authors evaluated 98 patients with a mean follow-up of 30.8±4.0 months who had undergone DB or selective bundle ACL reconstructions. Of these, 34 cases underwent DB ACL reconstruction (group A), 34 underwent selective AM bundle reconstruction (group B), and 30 underwent selective PL bundle reconstructions (group C). These groups were compared with respect to Lysholm and International Knee Documentation Committee (IKDC) score, side-to-side differences of anterior laxity measured by KT-2000 arthrometer at 30 lbs, and stress radiography and Lachman and pivot shift test results. Pre- and post-operative data were objectively evaluated using a statistical approach. Results The preoperative anterior instability measured by manual stress radiography at 90° of knee flexion in group A was significantly greater than that in groups B and C (all pACL tears offers comparable clinical results to DB reconstruction in complete ACL tears. PMID:27401652
A global verification study of a quasi-static knee model with multi-bundle ligaments
Mommersteeg, TJA; Blankevoort, L; Kooloos, JGM; Kauer, JMG; Maathuis, PGM
1996-01-01
The ligaments of the knee consist of fiber bundles with variable orientations, lengths and mechanical properties. In concept, however, these structures were too often seen as homogeneous structures, which are either stretched or slack during knee motions. In previous studies, we proposed a new struc
VECTOR BUNDLE, KILLING VECTOR FIELD AND PONTRYAGIN NUMBERS
周建伟
1991-01-01
Let E be a vector bundle over a compact Riemannian manifold M. We construct a natural metric on the bundle space E and discuss the relationship between the killing vector fields of E and M. Then we give a proof of the Bott-Baum-Cheeger Theorem for vector bundle E.
Gauge bundles and Born-Infeld on the noncommutative torus
Hofman, C.; Verlinde, E.
1998-01-01
In this paper, we describe non-abelian gauge bundles with magnetic and electric uxes on higher dimensional noncomm utative tori. We give an explicit construction of a large class of bundles with nonzero magnetic 't Hooft uxes. W e discuss Morita equiv alence between these bundles. The action of
QTLs analysis of rice peduncle vascular bundle and panicle traits
无
2001-01-01
@@The vascular bundle in plants plays an important role in transportation of photosynthetic products, mineral nutrients, water, and so on. Significant positive correlations were found between grain yield, panicle traits and the No. Of peduncle vascular bundles. So, it is very important to study the inheritance of peduncle vascular bundle, which is a quantitative trait.
Stability of Picard Bundle Over Moduli Space of Stable Vector Bundles of Rank Two Over a Curve
Indranil Biswas; Tomás L Gómez
2001-08-01
Answering a question of [BV] it is proved that the Picard bundle on the moduli space of stable vector bundles of rank two, on a Riemann surface of genus at least three, with fixed determinant of odd degree is stable.
Еprintsev А.Т.
2006-12-01
Full Text Available Salt-induced changes in malatdehydrogenase system activity make the essential contribution to cell adaptation to stress condition. The enzyme systems of C4-plants are most interesting due to their ability for adaptation to environment conditions. The role of separate components of malatdehydrogenase complex of mesophyll and bundle sheath cells of corn in formation of adaptive reaction in stressful conditions is investigated in presented work.The activation of all enzymes of malatdehydrogenase system and the subsequent decrease in their activity was observed in mesophyll durring the first stage of adaptation to salt influence. In bundle sheath cells such parameters are differed from control less essentially. Fast accumulation of piruvate in cells and malate in both investigated tissues was induced. The further salinity led to falling of concentration this intermediate. The concentration of piruvate was below control level, and it was raised by the end of an exposition.The results show that sodium chloride causes induction of Krebs-cycle in mesophyll and bundle sheath cells of corn and intensification of Hatch-Slack cycle. The described differences in function malatdehydrogenase systems of mesophyll and bundle sheath cells of leaves of corn under salinity mainly consist of the activity of enzymes of a studied complex in bundle sheath cells is subject to the minimal changes in comparison with mesophyll. Role of this enzymesystem in mechanisms of adaptive reaction of various tissues of corn to salt stress is discussed.
Zhang, Liang; Balzano, Leandro; Resasco, Daniel E
2005-08-04
Field emission studies were conducted on as-produced CoMoCAT single-walled carbon nanotube/silica composites with controlled nanotube diameter and bundle size. It has been observed that the as-produced nanotube material does not need to be separated from the high-surface area catalyst to be an effective electron emitter. By adjusting the catalytic synthesis conditions, single-walled carbon nanotubes (SWNT) of different diameters and bundle sizes were synthesized. A detailed characterization involving Raman spectroscopy, optical absorption (vis-NIR), SEM, and TEM was conducted to identify the nanotube species present in the different samples. The synthesis reaction temperature was found to affect the nanotube diameter and bundle size in opposite ways; that is, as the synthesis temperature increased the nanotube average diameter became larger, but the bundle size became smaller. A gradual and consistent reduction in the emission onset field was observed as the synthesis temperature increased. It is suggested that the bundle size, more than the nanotube diameter or chirality, determines the field emission characteristics of these composites. This is a clear demonstration that field emission characteristics of SWNT can be controlled by the nanotube synthesis conditions.
Modeling of Thermal Conductivity of CVI-Densified Composites at Fiber and Bundle Level
Kang Guan
2016-12-01
Full Text Available The evolution of the thermal conductivities of the unidirectional, 2D woven and 3D braided composites during the CVI (chemical vapor infiltration process have been numerically studied by the finite element method. The results show that the dual-scale pores play an important role in the thermal conduction of the CVI-densified composites. According to our results, two thermal conductivity models applicable for CVI process have been developed. The sensitivity analysis demonstrates the parameter with the most influence on the CVI-densified composites’ thermal conductivity is matrix cracking’s density, followed by volume fraction of the bundle and thermal conductance of the matrix cracks, finally by micro-porosity inside the bundles and macro-porosity between the bundles. The obtained results are well consistent with the reported data, thus our models could be useful for designing the processing and performance of the CVI-densified composites.
Effective action of heterotic compactification on K3 with non-trivial gauge bundles
Schasny, Martin
2012-10-15
In this thesis we study the heterotic string compactified on K3 with non-trivial gauge bundles. We focus on two backgrounds, the well-known standard embedding and abelian line bundles. Using a Kaluza-Klein reduction, the six-dimensional effective action is computed up to terms of order {alpha}'{sup 2} with special attention on the hypermultiplet sector. We compute the moduli dependent couplings of the matter fields and analyze the geometry of the hyperscalar sigma model. Moreover, we prove the consistency with six-dimensional supergravity and derive the appropriate D-term scalar potential. For the line bundle backgrounds we show that the gauge flux stabilizes some geometrical moduli and renders some abelian vector multiplets massive.
Productivity and costs of slash bundling in Nordic conditions
Kaerhae, K.; Vartiamaeki, T. [Metsaeteho Oy, P.O. Box 101, FI-00171 Helsinki (Finland)
2006-12-15
The number of slash bundlers and the volume of slash bundling have been rapidly increasing during the last few years in Finland. However, no comprehensive time or follow-up studies have been carried out on slash bundling technology in Finland or in any other country. Metsateho Oy carried out studies on the productivity and costs of slash bundling in different Nordic recovering conditions. The study methods included both time and follow-up studies. Data were collected during the summer and winter period primarily in Norway spruce (Picea abies L. Karst.) dominated clear cutting sites. The bundling techniques performed by different types of bundler (Fiberpac 370, Timberjack 1490D, Pika RS 2000, Valmet WoodPac) were studied. The average productivity of slash bundling was 18.1 bundles per operating (E{sub 15}, including delays shorter than 15min) hour with the Timberjack 1490D and Fiberpac 370 bundlers in the follow-up study. The operator of the slash bundler had the greatest effect on the productivity of bundling. The prerequisite for increased bundling volumes is a reduction in the costs of the most expensive sub-stage of the bundling supply chain, i.e. bundling itself. This requires improved recovery conditions at bundling sites, increased bundling productivity, larger sized bundles, and the execution of bundling operations in two work shifts using an efficient bundler and effective operator working methods. Implementation of these development measures will bring the bundling supply chain up to a speed that makes it the most competitive supply chain for forest chips in terms of total supply costs for long-distance transportation distances of more than 60km. (author)
Kaipainen, H.; Seppaenen, V.; Rinne, S.
1996-12-31
The conditions on which the bundling of the harvesting residues from spruce regeneration fellings would become profitable were studied. The calculations showed that one of the most important features was sufficient compaction of the bundle, so that the portion of the wood in the unit volume of the bundle has to be more than 40 %. The tests showed that the timber grab loader of farm tractor was insufficient for production of dense bundles. The feeding and compression device of the prototype bundler was constructed in the research and with this device the required density was obtained.The rate of compaction of the dry spruce felling residues was about 40 % and that of the fresh residues was more than 50 %. The comparison between the bundles showed that the calorific value of the fresh bundle per unit volume was nearly 30 % higher than that of the dry bundle. This means that the treatment of the bundles should be done of fresh felling residues. Drying of the bundles succeeded well, and the crushing and chipping tests showed that the processing of the bundles at the plant is possible. The treatability of the bundles was also excellent. By using the prototype, developed in the research, it was possible to produce a bundle of the fresh spruce harvesting residues, the diameter of which was about 50 cm and the length about 3 m, and the rate of compaction over 50 %. By these values the reduction target of the costs is obtainable
Phase Slips in Oscillatory Hair Bundles
Roongthumskul, Yuttana; Shlomovitz, Roie; Bruinsma, Robijn; Bozovic, Dolores
2013-01-01
Hair cells of the inner ear contain an active amplifier that allows them to detect extremely weak signals. As one of the manifestations of an active process, spontaneous oscillations arise in fluid immersed hair bundles of in vitro preparations of selected auditory and vestibular organs. We measure the phase-locking dynamics of oscillatory bundles exposed to low-amplitude sinusoidal signals, a transition that can be described by a saddle-node bifurcation on an invariant circle. The transition is characterized by the occurrence of phase slips, at a rate that is dependent on the amplitude and detuning of the applied drive. The resultant staircase structure in the phase of the oscillation can be described by the stochastic Adler equation, which reproduces the statistics of phase slip production. PMID:25167040
Care bundles reduce readmissions for COPD.
Matthews, Healther; Tooley, Cathy; Nicholls, Carol; Lindsey-Halls, Anna
In 2011, the respiratory nursing team at the James Paget University Hospital Foundation Trust were considering introducing a discharge care bundle for patients admitted with an acute exacerbation of chronic obstructive pulmonary disease. At the same time, the trust was asking for applications for Commissioning for Quality and Innovation schemes (CQUINs). These are locally agreed packages of quality improvement goals and indicators, which, if achieved in total, enable the provider to earn its full CQUIN payment. A CQUIN scheme should address the three domains of quality, safety and effectiveness, patient experience and also show innovation. This article discusses how the care bundle was introduced and how, over a 12-month period, it showed tangible results in improving the care pathway for COPD patients as well as reducing readmissions and saving a significant amount of money.
Muñoz, C Sánchez; Del Valle, E; Tudela, A González; Müller, K; Lichtmannecker, S; Kaniber, M; Tejedor, C; Finley, J J; Laussy, F P
2014-07-01
Controlling the ouput of a light emitter is one of the basic tasks of photonics, with landmarks such as the laser and single-photon sources. The development of quantum applications makes it increasingly important to diversify the available quantum sources. Here, we propose a cavity QED scheme to realize emitters that release their energy in groups, or "bundles" of N photons, for integer N. Close to 100% of two-photon emission and 90% of three-photon emission is shown to be within reach of state of the art samples. The emission can be tuned with system parameters so that the device behaves as a laser or as a N-photon gun. The theoretical formalism to characterize such emitters is developed, with the bundle statistics arising as an extension of the fundamental correlation functions of quantum optics. These emitters will be useful for quantum information processing and for medical applications.
Client Provider Collaboration for Service Bundling
LETIA, I. A.
2008-04-01
Full Text Available The key requirement for a service industry organization to reach competitive advantages through product diversification is the existence of a well defined method for building service bundles. Based on the idea that the quality of a service or its value is given by the difference between expectations and perceptions, we draw the main components of a frame that aims to support the client and the provider agent in an active collaboration meant to co-create service bundles. Following e3-value model, we structure the supporting knowledge around the relation between needs and satisfying services. We deal with different perspectives about quality through an ontological extension of Value Based Argumentation. The dialog between the client and the provider takes the form of a persuasion whose dynamic object is the current best configuration. Our approach for building service packages is a demand driven approach, allowing progressive disclosure of private knowledge.
Non-abelian higher gauge theory and categorical bundle
Viennot, David
2016-12-01
A gauge theory is associated with a principal bundle endowed with a connection permitting to define horizontal lifts of paths. The horizontal lifts of surfaces cannot be defined into a principal bundle structure. An higher gauge theory is an attempt to generalize the bundle structure in order to describe horizontal lifts of surfaces. A such attempt is particularly difficult for the non-abelian case. Some structures have been proposed to realize this goal (twisted bundle, gerbes with connection, bundle gerbe, 2-bundle). Each of them uses a category in place of the total space manifold of the usual principal bundle structure. Some of them replace also the structure group by a category (more precisely a Lie crossed module viewed as a category). But the base space remains still a simple manifold (possibly viewed as a trivial category with only identity arrows). We propose a new principal categorical bundle structure, with a Lie crossed module as structure groupoid, but with a base space belonging to a bigger class of categories (which includes non-trivial categories), that we called affine 2-spaces. We study the geometric structure of the categorical bundles built on these categories (which are a more complicated structure than the 2-bundles) and the connective structures on these bundles. Finally we treat an example interesting for quantum dynamics which is associated with the Bloch wave operator theory.
Maturity and maturity models in lean construction
Claus Nesensohn
2014-03-01
Full Text Available In recent years there has been an increasing interest in maturity models in management-related disciplines; which reflects a growing recognition that becoming more mature and having a model to guide the route to maturity can help organisations in managing major transformational change. Lean Construction (LC is an increasingly important improvement approach that organisations seek to embed. This study explores how to apply the maturity models to LC. Hence the attitudes, opinions and experiences of key industry informants with high levels of knowledge of LC were investigated. To achieve this, a review of maturity models was conducted, and data for the analysis was collected through a sequential process involving three methods. First a group interview with seven key informants. Second a follow up discussion with the same individuals to investigate some of the issues raised in more depth. Third an online discussion held via LinkedIn in which members shared their views on some of the results. Overall, we found that there is a lack of common understanding as to what maturity means in LC, though there is general agreement that the concept of maturity is a suitable one to reflect the path of evolution for LC within organisations.
Maturity and maturity models in lean construction
Claus Nesensohn
2014-03-01
Full Text Available In recent years there has been an increasing interest in maturity models in management-related disciplines; which reflects a growing recognition that becoming more mature and having a model to guide the route to maturity can help organisations in managing major transformational change. Lean Construction (LC is an increasingly important improvement approach that organisations seek to embed. This study explores how to apply the maturity models to LC. Hence the attitudes, opinions and experiences of key industry informants with high levels of knowledge of LC were investigated. To achieve this, a review of maturity models was conducted, and data for the analysis was collected through a sequential process involving three methods. First a group interview with seven key informants. Second a follow up discussion with the same individuals to investigate some of the issues raised in more depth. Third an online discussion held via LinkedIn in which members shared their views on some of the results. Overall, we found that there is a lack of common understanding as to what maturity means in LC, though there is general agreement that the concept of maturity is a suitable one to reflect the path of evolution for LC within organisations.
Quantum principal bundles and their characteristic classes
Durdevic, M
1996-01-01
A brief exposition of the general theory of characteristic classes of quantum principal bundles is given. The theory of quantum characteristic classes incorporates ideas of classical Weil theory into the conceptual framework of non-commutative differential geometry. A purely cohomological interpretation of the Weil homomorphism is given, together with a standard geometrical interpretation via quantum invariant polynomials. A natural spectral sequence is described. Some quantum phenomena appearing in the formalism are discussed.
Uncovering ecosystem service bundles through social preferences.
Berta Martín-López
Full Text Available Ecosystem service assessments have increasingly been used to support environmental management policies, mainly based on biophysical and economic indicators. However, few studies have coped with the social-cultural dimension of ecosystem services, despite being considered a research priority. We examined how ecosystem service bundles and trade-offs emerge from diverging social preferences toward ecosystem services delivered by various types of ecosystems in Spain. We conducted 3,379 direct face-to-face questionnaires in eight different case study sites from 2007 to 2011. Overall, 90.5% of the sampled population recognized the ecosystem's capacity to deliver services. Formal studies, environmental behavior, and gender variables influenced the probability of people recognizing the ecosystem's capacity to provide services. The ecosystem services most frequently perceived by people were regulating services; of those, air purification held the greatest importance. However, statistical analysis showed that socio-cultural factors and the conservation management strategy of ecosystems (i.e., National Park, Natural Park, or a non-protected area have an effect on social preferences toward ecosystem services. Ecosystem service trade-offs and bundles were identified by analyzing social preferences through multivariate analysis (redundancy analysis and hierarchical cluster analysis. We found a clear trade-off among provisioning services (and recreational hunting versus regulating services and almost all cultural services. We identified three ecosystem service bundles associated with the conservation management strategy and the rural-urban gradient. We conclude that socio-cultural preferences toward ecosystem services can serve as a tool to identify relevant services for people, the factors underlying these social preferences, and emerging ecosystem service bundles and trade-offs.
Uncontrolled inexact information within bundle methods
Malick, Jérôme; Welington De Oliveira, ·; Zaourar-Michel, Sofia
2016-01-01
International audience; We consider convex nonsmooth optimization problems where additional information with uncontrolled accuracy is readily available. It is often the case when the objective function is itself the output of an optimization solver, as for large-scale energy optimization problems tackled by decomposition. In this paper, we study how to incorporate the uncontrolled linearizations into (proximal and level) bundle algorithms in view of generating better iterates and possibly acc...
On Complex Supermanifolds with Trivial Canonical Bundle
Groeger, Josua
2016-01-01
We give an algebraic characterisation for the triviality of the canonical bundle of a complex supermanifold in terms of a certain Batalin-Vilkovisky superalgebra structure. As an application, we study the Calabi-Yau case, in which an explicit formula in terms of the Levi-Civita connection is achieved. Our methods include the use of complex integral forms and the recently developed theory of superholonomy.
Uncovering Ecosystem Service Bundles through Social Preferences
Martín-López, Berta; Iniesta-Arandia, Irene; García-Llorente, Marina; Palomo, Ignacio; Casado-Arzuaga, Izaskun; Amo, David García Del; Gómez-Baggethun, Erik; Oteros-Rozas, Elisa; Palacios-Agundez, Igone; Willaarts, Bárbara; González, José A.; Santos-Martín, Fernando; Onaindia, Miren; López-Santiago, Cesar; Montes, Carlos
2012-01-01
Ecosystem service assessments have increasingly been used to support environmental management policies, mainly based on biophysical and economic indicators. However, few studies have coped with the social-cultural dimension of ecosystem services, despite being considered a research priority. We examined how ecosystem service bundles and trade-offs emerge from diverging social preferences toward ecosystem services delivered by various types of ecosystems in Spain. We conducted 3,379 direct face-to-face questionnaires in eight different case study sites from 2007 to 2011. Overall, 90.5% of the sampled population recognized the ecosystem’s capacity to deliver services. Formal studies, environmental behavior, and gender variables influenced the probability of people recognizing the ecosystem’s capacity to provide services. The ecosystem services most frequently perceived by people were regulating services; of those, air purification held the greatest importance. However, statistical analysis showed that socio-cultural factors and the conservation management strategy of ecosystems (i.e., National Park, Natural Park, or a non-protected area) have an effect on social preferences toward ecosystem services. Ecosystem service trade-offs and bundles were identified by analyzing social preferences through multivariate analysis (redundancy analysis and hierarchical cluster analysis). We found a clear trade-off among provisioning services (and recreational hunting) versus regulating services and almost all cultural services. We identified three ecosystem service bundles associated with the conservation management strategy and the rural-urban gradient. We conclude that socio-cultural preferences toward ecosystem services can serve as a tool to identify relevant services for people, the factors underlying these social preferences, and emerging ecosystem service bundles and trade-offs. PMID:22720006
Uncovering ecosystem service bundles through social preferences
Berta Martín-López; Irene Iniesta-Arandia; Marina García-Llorente; Ignacio Palomo; Izaskun Casado-Arzuaga; David García Del Amo; Erik Gómez-Baggethun; Elisa Oteros-Rozas; Igone Palacios-Agundez; Bárbara Willaarts; González, José A.; Fernando Santos-Martín; Miren Onaindia; Cesar López-Santiago; Carlos Montes
2012-01-01
11 p. Ecosystem service assessments have increasingly been used to support environmental management policies, mainly based on biophysical and economic indicators. However, few studies have coped with the social-cultural dimension of ecosystem services, despite being considered a research priority. We examined how ecosystem service bundles and trade-offs emerge from diverging social preferences toward ecosystem services delivered by various types of ecosystems in Spain. We conducted 3,379 d...
Deformations of Fell bundles and twisted graph algebras
Raeburn, Iain
2016-11-01
We consider Fell bundles over discrete groups, and the C*-algebra which is universal for representations of the bundle. We define deformations of Fell bundles, which are new Fell bundles with the same underlying Banach bundle but with the multiplication deformed by a two-cocycle on the group. Every graph algebra can be viewed as the C*-algebra of a Fell bundle, and there are are many cocycles of interest with which to deform them. We thus obtain many of the twisted graph algebras of Kumjian, Pask and Sims. We demonstate the utility of our approach to these twisted graph algebras by proving that the deformations associated to different cocycles can be assembled as the fibres of a C*-bundle.
Bundling harvester; Harvennuspuun automaattisen nippukorjausharvesterin kehittaeminen
Koponen, K. [Eko-Log Oy, Kuopio (Finland)
1997-12-01
The starting point of the project was to design and construct, by taking the silvicultural point of view into account, a harvesting and processing system especially for energy-wood, containing manually driven bundling harvester, automating of the harvester, and automated loading. The equipment forms an ideal method for entrepreneur`s-line harvesting. The target is to apply the system also for owner`s-line harvesting. The profitability of the system promotes the utilisation of the system in both cases. The objectives of the project were: to construct a test equipment and prototypes for all the project stages, to carry out terrain and strain tests in order to examine the usability and durability, as well as the capacity of the machine, to test the applicability of the Eko-Log system in simultaneous harvesting of energy and pulp woods, and to start the marketing and manufacturing of the products. The basic problems of the construction of the bundling harvester have been solved using terrain-tests. The prototype machine has been shown to be operable. Loading of the bundles to form sufficiently economically transportable loads has been studied, and simultaneously, the branch-biomass has been tried to be utilised without loosing the profitability of transportation. The results have been promising, and will promote the profitable utilisation of wood-energy. (orig.)
Development of Strengthened Bundle High Temperature Superconductors
Lue, J.W.; Lubell, M.S. [Oak Ridge National Lab., TN (United States); Demko, J.A. [Oak Ridge Inst. for Science and Education, TN (United States); Tomsic, M. [Plastronic, Inc., Troy, OH (United States); Sinha, U. [Southwire Company, Carollton, GA (United States)
1997-12-31
In the process of developing high temperature superconducting (HTS) transmission cables, it was found that mechanical strength of the superconducting tape is the most crucial property that needs to be improved. It is also desirable to increase the current carrying capacity of the conductor so that fewer layers are needed to make the kilo-amp class cables required for electric utility usage. A process has been developed by encapsulating a stack of Bi-2223/Ag tapes with a silver or non-silver sheath to form a strengthened bundle superconductor. This process was applied to HTS tapes made by the Continuous Tube Forming and Filling (CTFF) technique pursued by Plastronic Inc. and HTS tapes obtained from other manufacturers. Conductors with a bundle of 2 to 6 HTS tapes have been made. The bundled conductor is greatly strengthened by the non-silver sheath. No superconductor degradation as compared to the sum of the original critical currents of the individual tapes was seen on the finished conductors.
An analytical fiber bundle model for pullout mechanics of root bundles
Cohen, D.; Schwarz, M.; Or, D.
2011-09-01
Roots in soil contribute to the mechanical stability of slopes. Estimation of root reinforcement is challenging because roots form complex biological networks whose geometrical and mechanical characteristics are difficult to characterize. Here we describe an analytical model that builds on simple root descriptors to estimate root reinforcement. Root bundles are modeled as bundles of heterogeneous fibers pulled along their long axes neglecting root-soil friction. Analytical expressions for the pullout force as a function of displacement are derived. The maximum pullout force and corresponding critical displacement are either derived analytically or computed numerically. Key model inputs are a root diameter distribution (uniform, Weibull, or lognormal) and three empirical power law relations describing tensile strength, elastic modulus, and length of roots as functions of root diameter. When a root bundle with root tips anchored in the soil matrix is pulled by a rigid plate, a unique parameter, ?, that depends only on the exponents of the power law relations, dictates the order in which roots of different diameters break. If ? 1, large roots break first. When ? = 1, all fibers break simultaneously, and the maximum tensile force is simply the roots' mean force times the number of roots in the bundle. Based on measurements of root geometry and mechanical properties, the value of ? is less than 1, usually ranging between 0 and 0.7. Thus, small roots always fail first. The model shows how geometrical and mechanical characteristics of roots and root diameter distribution affect the pullout force, its maximum and corresponding displacement. Comparing bundles of roots that have similar mean diameters, a bundle with a narrow variance in root diameter will result in a larger maximum force and a smaller displacement at maximum force than a bundle with a wide diameter distribution. Increasing the mean root diameter of a bundle without changing the distribution's shape increases
Sankararamakrishnan, R; Sansom, M S
1995-11-01
The transbilayer pore of the nicotinic acetylcholine receptor (nAChR) is formed by a pentameric bundle of M2 helices. Models of pentameric bundles of M2 helices have been generated using simulated annealing via restrained molecular dynamics. The influence of: (a) the initial C alpha template; and (b) screening of sidechain electrostatic interactions on the geometry of the resultant M2 helix bundles is explored. Parallel M2 helices, in the absence of sidechain electrostatic interactions, pack in accordance with simple ridges-in-grooves considerations. This results in a helix crossing angle of ca. +12 degrees, corresponding to a left-handed coiled coil structure for the bundle as a whole. Tilting of M2 helices away from the central pore axis at their C-termini and/or inclusion of sidechain electrostatic interactions may perturb such ridges-in-grooves packing. In the most extreme cases right-handed coiled coils are formed. An interplay between inter-helix H-bonding and helix bundle geometry is revealed. The effects of changes in electrostatic screening on the dimensions of the pore mouth are described and the significance of these changes in the context of models for the nAChR pore domain is discussed.
Generalized thermal maturity map of Alaska
U.S. Geological Survey, Department of the Interior — This dataset consists of a polygon coverage and associated attribute data derived from the onshore portion of the 1996 "Generalized Thermal Maturity Map of Alaska"...
Cooperative retraction of bundled type IV pili enables nanonewton force generation.
Nicolas Biais
2008-04-01
Full Text Available The causative agent of gonorrhea, Neisseria gonorrhoeae, bears retractable filamentous appendages called type IV pili (Tfp. Tfp are used by many pathogenic and nonpathogenic bacteria to carry out a number of vital functions, including DNA uptake, twitching motility (crawling over surfaces, and attachment to host cells. In N. gonorrhoeae, Tfp binding to epithelial cells and the mechanical forces associated with this binding stimulate signaling cascades and gene expression that enhance infection. Retraction of a single Tfp filament generates forces of 50-100 piconewtons, but nothing is known, thus far, on the retraction force ability of multiple Tfp filaments, even though each bacterium expresses multiple Tfp and multiple bacteria interact during infection. We designed a micropillar assay system to measure Tfp retraction forces. This system consists of an array of force sensors made of elastic pillars that allow quantification of retraction forces from adherent N. gonorrhoeae bacteria. Electron microscopy and fluorescence microscopy were used in combination with this novel assay to assess the structures of Tfp. We show that Tfp can form bundles, which contain up to 8-10 Tfp filaments, that act as coordinated retractable units with forces up to 10 times greater than single filament retraction forces. Furthermore, single filament retraction forces are transient, whereas bundled filaments produce retraction forces that can be sustained. Alterations of noncovalent protein-protein interactions between Tfp can inhibit both bundle formation and high-amplitude retraction forces. Retraction forces build over time through the recruitment and bundling of multiple Tfp that pull cooperatively to generate forces in the nanonewton range. We propose that Tfp retraction can be synchronized through bundling, that Tfp bundle retraction can generate forces in the nanonewton range in vivo, and that such high forces could affect infection.
An Alternative Bundle-to-Bundle Suturing Technique for Repairing Fresh Achilles Tendon Rupture.
Zhao, Jingjing; Yu, Bin; Xie, Ming; Huang, Ruokun; Xiao, Kai
2016-01-01
The main concern about conventional Achilles tendon repair surgical techniques is how to maintain the initial strength of the ruptured Achilles tendon through complicated suturing methods. The primary surgical problem lies in the properties of the soft tissue; the deterioration of the Achilles tendon, especially in its elasticity; and the surface lubricity of the local tissues. In the present study, we describe an innovative bundle-to-bundle suturing method that addresses these potential problems. Copyright © 2016 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.
Amplitude death of coupled hair bundles with stochastic channel noise
Kim, Kyung-Joong
2014-01-01
Hair cells conduct auditory transduction in vertebrates. In lower vertebrates such as frogs and turtles, due to the active mechanism in hair cells, hair bundles(stereocilia) can be spontaneously oscillating or quiescent. Recently, the amplitude death phenomenon has been proposed [K.-H. Ahn, J. R. Soc. Interface, {\\bf 10}, 20130525 (2013)] as a mechanism for auditory transduction in frog hair-cell bundles, where sudden cessation of the oscillations arises due to the coupling between non-identical hair bundles. The gating of the ion channel is intrinsically stochastic due to the stochastic nature of the configuration change of the channel. The strength of the noise due to the channel gating can be comparable to the thermal Brownian noise of hair bundles. Thus, we perform stochastic simulations of the elastically coupled hair bundles. In spite of stray noisy fluctuations due to its stochastic dynamics, our simulation shows the transition from collective oscillation to amplitude death as inter-bundle coupling str...
Monopoles and Modifications of Bundles over Elliptic Curves
Andrey M. Levin
2009-06-01
Full Text Available Modifications of bundles over complex curves is an operation that allows one to construct a new bundle from a given one. Modifications can change a topological type of bundle. We describe the topological type in terms of the characteristic classes of the bundle. Being applied to the Higgs bundles modifications establish an equivalence between different classical integrable systems. Following Kapustin and Witten we define the modifications in terms of monopole solutions of the Bogomolny equation. We find the Dirac monopole solution in the case R × (elliptic curve. This solution is a three-dimensional generalization of the Kronecker series. We give two representations for this solution and derive a functional equation for it generalizing the Kronecker results. We use it to define Abelian modifications for bundles of arbitrary rank. We also describe non-Abelian modifications in terms of theta-functions with characteristic.
A Tannakian approach to dimensional reduction of principal bundles
Álvarez-Cónsul, Luis; García-Prada, Oscar
2016-01-01
Let $P$ be a parabolic subgroup of a connected simply connected complex semisimple Lie group $G$. Given a compact K\\"ahler manifold $X$, the dimensional reduction of $G$-equivariant holomorphic vector bundles over $X\\times G/P$ was carried out by the first and third authors. This raises the question of dimensional reduction of holomorphic principal bundles over $X\\times G/P$. The method used for equivariant vector bundles does not generalize to principal bundles. In this paper, we adapt to equivariant principal bundles the Tannakian approach of Nori, to describe the dimensional reduction of $G$-equivariant principal bundles over $X\\times G/P$, and to establish a Hitchin--Kobayashi type correspondence. In order to be able to apply the Tannakian theory, we need to assume that $X$ is a complex projective manifold.
The avalanche process of the fiber bundle model with defect
Hao, Da-Peng; Tang, Gang; Xia, Hui; Xun, Zhi-Peng; Han, Kui
2017-04-01
In order to explore the impacts of defect on the tensile fracture process of materials, the fiber bundle model with defect is constructed based on the classical fiber bundle model. In the fiber bundle model with defect, the two key parameters are the mean size and the density of defects. In both uniform and Weibull threshold distributions, the mean size and density all bring impacts on the threshold distribution of fibers. By means of analytical approximation and numerical simulation, we show that the two key parameters of the model have substantial effects on the failure process of the bundle. From macroscopic view, the defect described by the altering of threshold distribution of fibers will has a significant impact on the mechanical properties of the bundle. While in microscopic scale, the statistical properties of the model are still harmonious with the classical fiber bundle model.
Cosmic multimuon bundles detected by DELPHI
Rídky, J
2004-01-01
The DELPHI detector located at LEP accelerator has been used also to measure multimuon bundles originated from cosmic ray interactions. Two subdetectors-hadron calorimeter and time projection chamber, are used for this purpose. The 1999 and 2000 data are analyzed over wide range of multiplicities. The multiplicity distribution is compared with prediction of Monte Carlo simulation based on CORSIKA/QGSJET. The Monte-Carlo does not describe the large multiplicity part of data. Even the extreme assumption on the cosmic ray composition (pure iron nuclei) hardly predicts comparable number of high-multiplicity events.
Differential geometry of complex vector bundles
Kobayashi, Shoshichi
2014-01-01
Holomorphic vector bundles have become objects of interest not only to algebraic and differential geometers and complex analysts but also to low dimensional topologists and mathematical physicists working on gauge theory. This book, which grew out of the author's lectures and seminars in Berkeley and Japan, is written for researchers and graduate students in these various fields of mathematics. Originally published in 1987. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeto
Higher order mechanics on graded bundles
Bruce, Andrew James; Grabowska, Katarzyna; Grabowski, Janusz
2015-05-01
In this paper we develop a geometric approach to higher order mechanics on graded bundles in both, the Lagrangian and Hamiltonian formalism, via the recently discovered weighted algebroids. We present the corresponding Tulczyjew triple for this higher order situation and derive in this framework the phase equations from an arbitrary (also singular) Lagrangian or Hamiltonian, as well as the Euler-Lagrange equations. As important examples, we geometrically derive the classical higher order Euler-Lagrange equations and analogous reduced equations for invariant higher order Lagrangians on Lie groupoids.
Bundling Products and Services Through Modularization Strategies
Bask, Anu; Hsuan, Juliana; Rajahonka, Mervi;
2012-01-01
Modularity has been recognized as a powerful tool in improving the efficiency and management of product design and manufacturing. However, the integrated view on covering both, product and service modularity for product-service systems (PSS), is under researched. Therefore, in this paper our...... objective is to contribute to the PSS modularity. Thus, we describe configurations of PSSs and the bundling of products and services through modularization strategies. So far there have not been tools to analyze and determine the correct combinations of degrees of product and service modularities....
Compression of a bundle of light rays.
Marcuse, D
1971-03-01
The performance of ray compression devices is discussed on the basis of a phase space treatment using Liouville's theorem. It is concluded that the area in phase space of the input bundle of rays is determined solely by the required compression ratio and possible limitations on the maximum ray angle at the output of the device. The efficiency of tapers and lenses as ray compressors is approximately equal. For linear tapers and lenses the input angle of the useful rays must not exceed the compression ratio. The performance of linear tapers and lenses is compared to a particular ray compressor using a graded refractive index distribution.
Vector bundles on complex projective spaces
Okonek, Christian; Spindler, Heinz
1980-01-01
This expository treatment is based on a survey given by one of the authors at the Séminaire Bourbaki in November 1978 and on a subsequent course held at the University of Göttingen. It is intended to serve as an introduction to the topical question of classification of holomorphic vector bundles on complex projective spaces, and can easily be read by students with a basic knowledge of analytic or algebraic geometry. Short supplementary sections describe more advanced topics, further results, and unsolved problems.
Crystal structure of an HIV assembly and maturation switch
Wagner, Jonathan M.; Zadrozny, Kaneil K.; Chrustowicz, Jakub; Purdy, Michael D.; Yeager, Mark; Ganser-Pornillos, Barbie K.; Pornillos, Owen
2016-07-14
Virus assembly and maturation proceed through the programmed operation of molecular switches, which trigger both local and global structural rearrangements to produce infectious particles. HIV-1 contains an assembly and maturation switch that spans the C-terminal domain (CTD) of the capsid (CA) region and the first spacer peptide (SP1) of the precursor structural protein, Gag. The crystal structure of the CTD-SP1 Gag fragment is a goblet-shaped hexamer in which the cup comprises the CTD and an ensuing type II β-turn, and the stem comprises a 6-helix bundle. The β-turn is critical for immature virus assembly and the 6-helix bundle regulates proteolysis during maturation. This bipartite character explains why the SP1 spacer is a critical element of HIV-1 Gag but is not a universal property of retroviruses. Our results also indicate that HIV-1 maturation inhibitors suppress unfolding of the CA-SP1 junction and thereby delay access of the viral protease to its substrate.
Heat transfer in bundles of finned tubes in crossflow
Stasiulevicius, J.; Skrinska, A.; Zukauskas, A.; Hewitt, G.F.
1986-01-01
This book provides correlations of heat transfer and hydraulic data for bundles of finned tubes in crossflow at high Reynolds numbers. Results of studies of the effectiveness of the fin, local, and mean heat transfer coefficients are presented. The effect of geometric parameters of the fins and of the location of tubes in the bundle on heat transfer and hydraulic drag are described. The resistance of the finned tube bundles under study and other factors are examined.
Coolability of ballooned VVER bundles with pellet relocation
Hozer, Z.; Nagy, I.; Windberg, P.; Vimi, A. [AEKI, P.O.box 49, Budapest, H-1525 (Hungary)
2009-06-15
During a LOCA incident the high pressure in the fuel rods can lead to clad ballooning and the debris of fuel pellets can fill the enlarged volume. The evaluation of the role of these two effects on the coolability of VVER type fuel bundles was the main objective of the experimental series. The tests were carried out in the modified configuration of the CODEX facility. 19-rod electrically heated VVER type bundle was used. The test section was heated up to 600 deg. C in steam atmosphere and the bundle was quenched from the bottom by cold water. Three series of tests were performed: 1. Reference bundle with fuel rods without ballooning, with uniform power profile. 2. Bundle with 86% blockage rate and with uniform power profile. The blockage rate was reached by superimposing hollow sleeves on all 19 fuel rods. 3. Bundle with 86% blockage rate and with local power peak in the ballooned area. The local power peak was produced by the local reduction the cross section of the internal heater bar inside of the fuel rods. In all three bundle configurations three different cooling water flow-rates were applied. The experimental results confirmed that a VVER bundle with even 86% blockage rate remains coolable after a LOCA event. The ballooned section creates some obstacles for the cooling water during reflood of the bundle, but this effect causes only a short delay in the cooling down of the hot fuel rods. Earlier tests on the coolability of ballooned bundles were performed only with Western type bundles with square fuel lattice. The present test series was the first confirmation of the coolability of VVER type bundles with triangular lattice. The accumulation of fuel pellet debris in the ballooned volume results in a local power peak, which leads to further slowing down of quench front. The first tests indicated that the effect of local power peak was less significant on the delay of cooling down than the effect of ballooning. (authors)
Heat Transfer Analysis in Wire Bundles for Aerospace Vehicles
Rickman, S. L.; Iamello, C. J.
2016-01-01
Design of wiring for aerospace vehicles relies on an understanding of "ampacity" which refers to the current carrying capacity of wires, either, individually or in wire bundles. Designers rely on standards to derate allowable current flow to prevent exceedance of wire temperature limits due to resistive heat dissipation within the wires or wire bundles. These standards often add considerable margin and are based on empirical data. Commercial providers are taking an aggressive approach to wire sizing which challenges the conventional wisdom of the established standards. Thermal modelling of wire bundles may offer significant mass reduction in a system if the technique can be generalized to produce reliable temperature predictions for arbitrary bundle configurations. Thermal analysis has been applied to the problem of wire bundles wherein any or all of the wires within the bundle may carry current. Wire bundles present analytical challenges because the heat transfer path from conductors internal to the bundle is tortuous, relying on internal radiation and thermal interface conductance to move the heat from within the bundle to the external jacket where it can be carried away by convective and radiative heat transfer. The problem is further complicated by the dependence of wire electrical resistivity on temperature. Reduced heat transfer out of the bundle leads to higher conductor temperatures and, hence, increased resistive heat dissipation. Development of a generalized wire bundle thermal model is presented and compared with test data. The steady state heat balance for a single wire is derived and extended to the bundle configuration. The generalized model includes the effects of temperature varying resistance, internal radiation and thermal interface conductance, external radiation and temperature varying convective relief from the free surface. The sensitivity of the response to uncertainties in key model parameters is explored using Monte Carlo analysis.
Isothermal microcalorimetry, a tool for probing SWNT bundles.
Marquis, Renaud; Greco, Carla; Schultz, Patrick; Meunier, Stéphane; Mioskowski, Charles
2009-11-01
The bundling state of several dry single-walled carbon nanotube (SWNT) samples is compared using isothermal microcalorimetry (IMC). So as to get different dry samples with various bundling states, the pristine SWNTs were pretreated with a solution of an aromatic amphiphile with or without sonication, washed and dried before being studied by IMC. The bundling state of the different SWNT samples, which was first analyzed by TEM, was then correlated to the obtained IMC data thanks to the interpretation of the observed energy transfer phenomena. From our results, IMC appears to be an interesting technique for the surface probing of dry SWNT samples, and herein for the evaluation of the bundling state.
Restriction Theorem for Principal bundles in Arbitrary Characteristic
Gurjar, Sudarshan
2015-01-01
The aim of this paper is to prove two basic restriction theorem for principal bundles on smooth projective varieties in arbitrary characteristic generalizing the analogues theorems of Mehta-Ramanathan for vector bundles. More precisely, let G be a reductive algebraic group over an algebraically...... closed field k and let X be a smooth, projective variety over k together with a very ample line bundle O(1). The main result of the paper is that if E is a semistable (resp. stable) principal G-bundle on X w.r.t O(1), then the restriction of E to a general, high multi-degree, complete-intersection curve...
Enthalpy and void distributions in subchannels of PHWR fuel bundles
Park, J. W.; Choi, H.; Rhee, B. W. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)
1998-12-31
Two different types of the CANDU fuel bundles have been modeled for the ASSERT-IV code subchannel analysis. From calculated values of mixture enthalpy and void fraction distribution in the fuel bundles, it is found that net buoyancy effect is pronounced in the central region of the DUPIC fuel bundle when compared with the standard CANDU fuel bundle. It is also found that the central region of the DUPIC fuel bundle can be cooled more efficiently than that of the standard fuel bundle. From the calculated mixture enthalpy distribution at the exit of the fuel channel, it is found that the mixture enthalpy and void fraction can be highest in the peripheral region of the DUPIC fuel bundle. On the other hand, the enthalpy and the void fraction were found to be highest in the central region of the standard CANDU fuel bundle at the exit of the fuel channel. This study shows that the subchannel analysis is very useful in assessing thermal behavior of the fuel bundle that could be used in CANDU reactors. 10 refs., 4 figs., 2 tabs. (Author)
Development and validation of the Eating Maturity Questionnaire: Preliminary findings.
Potocka, Adrianna; Najder, Anna
2016-10-01
This article describes the development of the Eating Maturity Questionnaire, a self-reported measurement of eating maturity that initiates and gives direction to human eating behaviors. The Eating Maturity Questionnaire was designed to study individuals' biological and psychosocial motives for eating. The Eating Maturity Questionnaire is a 21-item tool with satisfactory psychometric values (Cronbach's α coefficients between 0.83 and 0.88) consisting of two subscales: Rational Eating and Psychosocial Maturity Eating Maturity Questionnaire results may be used to design programs that target eating behaviors and body mass modification.
Lu, Xiaowei; Sipe, Conor W
2016-01-01
Hearing loss is the most common and costly sensory defect in humans and genetic causes underlie a significant proportion of affected individuals. In mammals, sound is detected by hair cells (HCs) housed in the cochlea of the inner ear, whose function depends on a highly specialized mechanotransduction organelle, the hair bundle. Understanding the factors that regulate the development and functional maturation of the hair bundle is crucial for understanding the pathophysiology of human deafness. Genetic analysis of deafness genes in animal models, together with complementary forward genetic screens and conditional knock-out mutations in essential genes, have provided great insights into the molecular machinery underpinning hair-bundle development and function. In this review, we highlight recent advances in our understanding of hair-bundle morphogenesis, with an emphasis on the molecular pathways governing hair-bundle polarity and orientation. We next discuss the proteins and structural elements important for hair-cell mechanotransduction as well as hair-bundle cohesion and maintenance. In addition, developmental signals thought to regulate tonotopic features of HCs are introduced. Finally, novel approaches that complement classic genetics for studying the molecular etiology of human deafness are presented. WIREs Dev Biol 2016, 5:85-101. doi: 10.1002/wdev.202 For further resources related to this article, please visit the WIREs website.
Bhattacharya Uttam
2014-01-01
Full Text Available Today it is crucial for organizations to pay even greater attention on quality management as the importance of this function in achieving ultimate business objectives is increasingly becoming clearer. Importance of the Quality Management (QM Function in achieving basic need by ensuring compliance with Capability Maturity Model Integrated (CMMI / International Organization for Standardization (ISO is a basic demand from business nowadays. However, QM Function and its processes need to be made much more mature to prevent delivery outages and to achieve business excellence through their review and auditing capability. Many organizations now face challenges in determining the maturity of the QM group along with the service offered by them and the right way to elevate the maturity of the same. The objective of this whitepaper is to propose a new model –the Audit Maturity Model (AMM which will provide organizations with a measure of their maturity in quality management in the perspective of auditing, along with recommendations for preventing delivery outage, and identifying risk to achieve business excellence. This will enable organizations to assess QM maturity higher than basic hygiene and will also help them to identify gaps and to take corrective actions for achieving higher maturity levels. Hence the objective is to envisage a new auditing model as a part of organisation quality management function which can be a guide for them to achieve higher level of maturity and ultimately help to achieve delivery and business excellence.
Bundled capillary electrophoresis using microstructured fibres.
Rogers, Benjamin; Gibson, Graham T T; Oleschuk, Richard D
2011-01-01
Joule heating, arising from the electric current passing through the capillary, causes many undesired effects in CE that ultimately result in band broadening. The use of narrow-bore capillaries helps to solve this problem as smaller cross-sectional area results in decreased Joule heating and the rate of heat dissipation is increased by the larger surface-to-volume ratio. Issues arising from such small capillaries, such as poor detection sensitivity, low loading capacity and high flow-induced backpressure (complicating capillary loading) can be avoided by using a bundle of small capillaries operating simultaneously that share buffer reservoirs. Microstructured fibres, originally designed as waveguides in the telecommunication industry, are essentially a bundle of parallel ∼5 μm id channels that extend the length of a fibre having otherwise similar dimensions to conventional CE capillaries. This work presents the use of microstructured fibres for CZE, taking advantage of their relatively high surface-to-volume ratio and the small individual size of each channel to effect highly efficient separations, particularly for dye-labelled peptides.
Bundling hand hygiene interventions and measurement to decrease health care-associated infections.
Pincock, Ted; Bernstein, Paul; Warthman, Shawn; Holst, Elizabeth
2012-05-01
Proper performance of hand hygiene at key moments during patient care is the most important means of preventing health care-associated infections (HAIs). With increasing awareness of the cost and societal impact caused by HAIs has come the realization that hand hygiene improvement initiatives are crucial to reducing the burden of HAIs. Multimodal strategies have emerged as the best approach to improving hand hygiene compliance. These strategies use a variety of intervention components intended to address obstacles to complying with good hand hygiene practices, and to reinforce behavioral change. Although research has substantiated the effectiveness of the multimodal design, challenges remain in promoting widespread adoption and implementation of a coordinated approach. This article reviews elements of a multimodal approach to improve hand hygiene and advocates the use of a "bundled" strategy. Eight key components of this bundle are proposed as a cohesive program to enable the deployment of synergistic, coordinated efforts to promote good hand hygiene practice. A consistent, bundled methodology implemented at multiple study centers would standardize processes and allow comparison of outcomes, validation of the methodology, and benchmarking. Most important, a bundled approach can lead to sustained infection reduction.
Incremental Real-Time Bundle Adjustment for Multi-Camera Systems with Points at Infinity
Schneider, J.; Läbe, T.; Förstner, W.
2013-08-01
This paper presents a concept and first experiments on a keyframe-based incremental bundle adjustment for real-time structure and motion estimation in an unknown scene. In order to avoid periodic batch steps, we use the software iSAM2 for sparse nonlinear incremental optimization, which is highly efficient through incremental variable reordering and fluid relinearization. We adapted the software to allow for (1) multi-view cameras by taking the rigid transformation between the cameras into account, (2) omnidirectional cameras as it can handle arbitrary bundles of rays and (3) scene points at infinity, which improve the estimation of the camera orientation as points at the horizon can be observed over long periods of time. The real-time bundle adjustment refers to sets of keyframes, consisting of frames, one per camera, taken in a synchronized way, that are initiated if a minimal geometric distance to the last keyframe set is exceeded. It uses interest points in the keyframes as observations, which are tracked in the synchronized video streams of the individual cameras and matched across the cameras, if possible. First experiments show the potential of the incremental bundle adjustment w.r.t. time requirements. Our experiments are based on a multi-camera system with four fisheye cameras, which are mounted on a UAV as two stereo pairs, one looking ahead and one looking backwards, providing a large field of view.
Masataka Deie
2015-01-01
Full Text Available Background. Posterior cruciate ligament (PCL injuries are not rare in acute knee injuries, and several recent anatomical studies of the PCL and reconstructive surgical techniques have generated improved patient results. Now, we have evaluated PCL reconstructions performed by either the single-bundle or double-bundle technique in a patient group followed up retrospectively for more than 10 years. Methods. PCL reconstructions were conducted using the single-bundle (27 cases or double-bundle (13 cases method from 1999 to 2002. The mean age at surgery was 34 years in the single-bundle group and 32 years in the double-bundle group. The mean follow-up period was 12.5 years. Patients were evaluated by Lysholm scoring, the gravity sag view, and knee arthrometry. Results. The Lysholm score after surgery was 89.1±5.6 points for the single-bundle group and 91.9±4.5 points for the double-bundle group. There was no significant difference between the methods in the side-to-side differences by gravity sag view or knee arthrometer evaluation, although several cases in both groups showed a side-to-side difference exceeding 5 mm by the latter evaluation method. Conclusions. We found no significant difference between single- and double-bundle PCL reconstructions during more than 10 years of follow-up.
Safety assessment for the CANFLEX-NU fuel bundles with respect to the 37-element fuel bundles
Suk, H. C.; Lim, H. S. [Korea Atomic Energy Research Institute, Taejon (Korea)
1999-11-01
The KAERI and AECL have jointly developed an advanced CANDU fuel, called CANFLEX-NU fuel bundle. CANFLEX 43-element bundle has some improved features of increased operating margin and enhanced safety compared to the existing 37-element bundle. Since CANFLEX fuel bundle is designed to be compatible with the CANDU-6 reactor design, the behaviour in the thermalhydraulic system will be nearly identical with 37-element bundle. But due to different element design and linear element power distribution between the two bundles, it is expected that CANFLEX fuel behaviour would be different from the behaviour of the 37-element fuel. Therefore, safety assessments on the design basis accidents which result if fuel failures are performed. For all accidents selected, it is observed that the loading of CANFLEX bundle in an existing CANDU-6 reactor would not worsen the reactor safety. It is also predicted that fission product release for CANFLEX fuel bundle generally is lower than that for 37-element bundle. 3 refs., 2 figs., 2 tabs. (Author)
Vector Bundles with a Fixed Determinant on an Irreducible Nodal Curve
Usha N Bhosle
2005-11-01
Let be the moduli space of generalized parabolic bundles (GPBs) of rank and degree on a smooth curve . Let $M_{\\overline{L}}$ be the closure of its subset consisting of GPBs with fixed determinant $\\overline{L}$. We define a moduli functor for which $M_{\\overline{L}}$ is the coarse moduli scheme. Using the correspondence between GPBs on and torsion-free sheaves on a nodal curve of which is a desingularization, we show that $M_{\\overline{L}}$ can be regarded as the compactified moduli scheme of vector bundles on with fixed determinant. We get a natural scheme structure on the closure of the subset consisting of torsion-free sheaves with a fixed determinant in the moduli space of torsion-free sheaves on . The relation to Seshadri–Nagaraj conjecture is studied.
Yan, Xingtao; Li, Fu; Ma, Xiaolong; Lv, Juan; He, Yinghong; Zhao, Yiyi; Bu, Fan
2016-10-01
The use of line-plane-switching infrared fiber bundle to achieve wide field of view push-broom infrared imaging has been studied with experiment. In this technology, the linear array end of the imaging fiber bundle is used as a long-linear array infrared detector, and the plane array end of the bundle is coupled by a mature small scale Infrared Focal Plane Array (IRFPA). It can evade the difficulty of getting the long-linear array infrared detector directly, and has a signally significance to the development of internal infrared imaging technology. Based on the introduction of the composition, working principle of this novel infrared optical system, the system principle-demonstrating experiment has been accomplished. The line-plane-switching fiber bundle used in this experiment is 64×9 format plane array and 192×3 format linear array. It is made from chalcogenide glass fibers, possessing core (As40S59.5Se0.5) of 45 μm, cladding (As40S60) of 5 μm, and error of 1% in diameter. Perfect imaging results prove that this novel technology is feasibility and superiority. The analysis of the experiment makes a foundation for the subsequent further verification experiments.
Chip Multithreaded Consistency Model
Zu-Song Li; Dan-Dan Huan; Wei-Wu Hu; Zhi-Min Tang
2008-01-01
Multithreaded technique is the developing trend of high performance processor. Memory consistency model is essential to the correctness, performance and complexity of multithreaded processor. The chip multithreaded consistency model adapting to multithreaded processor is proposed in this paper. The restriction imposed on memory event ordering by chip multithreaded consistency is presented and formalized. With the idea of critical cycle built by Wei-Wu Hu, we prove that the proposed chip multithreaded consistency model satisfies the criterion of correct execution of sequential consistency model. Chip multithreaded consistency model provides a way of achieving high performance compared with sequential consistency model and ensures the compatibility of software that the execution result in multithreaded processor is the same as the execution result in uniprocessor. The implementation strategy of chip multithreaded consistency model in Godson-2 SMT processor is also proposed. Godson-2 SMT processor supports chip multithreaded consistency model correctly by exception scheme based on the sequential memory access queue of each thread.
Hahm, Myung Gwan; Wang, Hailong; Jung, Hyun Young; Hong, Sanghyun; Lee, Sung-Goo; Kim, Sung-Ryong; Upmanyu, Moneesh; Jung, Yung Joon
2012-05-01
High-density carbon nanotube networks (CNNs) continue to attract interest as active elements in nanoelectronic devices, nanoelectromechanical systems (NEMS) and multifunctional nanocomposites. The interplay between the network nanostructure and its properties is crucial, yet current understanding remains limited to the passive response. Here, we employ a novel superstructure consisting of millimeter-long vertically aligned single walled carbon nanotubes (SWCNTs) sandwiched between polydimethylsiloxane (PDMS) layers to quantify the effect of two classes of mechanical stimuli, film densification and stretching, on the electronic and thermal transport across the network. The network deforms easily with an increase in the electrical and thermal conductivities, suggestive of a floppy yet highly reconfigurable network. Insight from atomistically informed coarse-grained simulations uncover an interplay between the extent of lateral assembly of the bundles, modulated by surface zipping/unzipping, and the elastic energy associated with the bent conformations of the nanotubes/bundles. During densification, the network becomes highly interconnected yet we observe a modest increase in bundling primarily due to the reduced spacing between the SWCNTs. The stretching, on the other hand, is characterized by an initial debundling regime as the strain accommodation occurs via unzipping of the branched interconnects, followed by rapid rebundling as the strain transfers to the increasingly aligned bundles. In both cases, the increase in the electrical and thermal conductivity is primarily due to the increase in bundle size; the changes in network connectivity have a minor effect on the transport. Our results have broad implications for filamentous networks of inorganic nanoassemblies composed of interacting tubes, wires and ribbons/belts.High-density carbon nanotube networks (CNNs) continue to attract interest as active elements in nanoelectronic devices, nanoelectromechanical systems
AgInCd control rod failure in the QUENCH-13 bundle test
Sepold, L. [Forschungszentrum Karlsruhe, Institut fuer Materialforschung, Nuclear Safety Program (NUKLEAR), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)], E-mail: leo.sepold@imf.fzk.de; Lind, T. [Paul Scherrer Institut, Laboratory for Thermalhydralics (LTH), Department of Nuclear Energy and Safety (NES), 5232 Villigen PSI (Switzerland); Csordas, A. Pinter [Fuel Materials Department, HAS KFKI AEKI, 1121 Budapest (Hungary); Stegmaier, U.; Steinbrueck, M.; Stuckert, J. [Forschungszentrum Karlsruhe, Institut fuer Materialforschung, Nuclear Safety Program (NUKLEAR), Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany)
2009-09-15
The QUENCH off-pile experiments performed at the Karlsruhe Research Center are to investigate the high-temperature behavior of Light Water Reactor (LWR) core materials under transient conditions and in particular the hydrogen source term resulting from the water injection into an uncovered LWR core. The typical LWR-type QUENCH test bundle, which is electrically heated, consists of 21 fuel rod simulators with a total length of approximately 2.5 m. The Zircaloy-4 rod claddings and the grid spacers are identical to those used in Pressurized Water Reactors (PWR) whereas the fuel is represented by ZrO{sub 2} pellets. In the QUENCH-13 experiment the single unheated fuel rod simulator in the center of the test bundle was replaced by a PWR-type control rod. The QUENCH-13 experiment consisting of pre-oxidation, transient, and quench water injection at the bottom of the test section investigated the effect of an AgInCd/stainless steel/Zircaloy-4 control rod assembly on early-phase bundle degradation and on reflood behavior. Furthermore, in the frame of the EU 6th Framework Network of Excellence SARNET, release and transport of aerosols of a failed absorber rod were to be studied in QUENCH-13, which was accomplished with help of aerosol measurements performed by PSI-Switzerland and AEKI-Hungary. Control rod failure was initiated by eutectic interaction of steel cladding and Zircaloy-4 guide tube and was indicated at about 1415 K by axial peak absorber and bundle temperature responses and additionally by the on-line aerosol monitoring system. Significant releases of aerosols and melt relocation from the control rod were observed at an axial peak bundle temperature of 1650 K. At a maximum bundle temperature of 1820 K reflood from the bottom was initiated with cold water at a flooding rate of 52 g/s. There was no noticeable temperature escalation during quenching. This corresponds to the small amount of about 1 g in hydrogen production during the quench phase (compared to 42 g
Conservation of Hydrophobic and Hydrophilic Residues in Four-Helix Bundle
秦猛; 王骏; 王炜
2003-01-01
The conservation of the hydrophobic and the hydrophilic residue sites obtained from 1000 designed sequences with the Z-score method for a four-helix bundle has been studied. The folding dynamic and thermodynamic features of the designed sequences and their different mutations are also studied. It is found that this conservation is related to the stability and the fast folding of the model proteins. Our results are consistent with the experimental results.
An explicit Ricci potential for the Universal Moduli Space of Vector Bundles
Andersen, Jørgen Ellegaard; Poulsen, Niccolo Skovgård
In this paper we modify the coordinate construction in [5] on the universal moduli space of pair consisting of a Riemann Surfaces and a stable holomorphic bundles on the Riemann Surface, so as to produce a new set of coordinates, which are in fact Kähler coordinates on this universal moduli space....... Further, we give a functional determinant formula for the Ricci potential of the universal moduli space....
Non-abelian higher gauge theory and categorical bundle
Viennot, David
2012-01-01
A gauge theory is associated with a principal bundle endowed with a connection permitting to define horizontal lifts of paths. The horizontal lifts of surfaces cannot be defined into a principal bundle structure. An higher gauge theory is an attempt to generalize the bundle structure in order to describe horizontal lifts of surfaces. A such attempt is particularly difficult for the non-abelian case. Some structures have been proposed to realize this goal (twisted bundle, gerbes with connection, bundle gerbe, 2-bundle). Each of them uses a category in place of the total space manifold of the usual principal bundle structure. Some of them replace also the structure group by a category (more precisely a Lie crossed module viewed as a category). But the base space remains still a simple manifold (possibly viewed as a trivial category with only identity arrows). We propose a new principal categorical bundle structure, with a Lie crossed module as structure groupoid, but with a base space belonging to a bigger clas...
Presenting Lexical Bundles for Explicit Noticing with Schematic Linguistic Representation
Thomson, Haidee Elizabeth
2016-01-01
Lexical bundles are essential for fluency, but their incompleteness is a stumbling block for learners. In this study, two presentation methods to increase awareness of lexical bundles through explicit noticing are explored and compared with incidental exposure. The three conditions in this study were as follows: noticing with schematic linguistic…
Smooth Bundling of Large Streaming and Sequence Graphs
Hurter, C.; Ersoy, O.; Telea, A.
2013-01-01
Dynamic graphs are increasingly pervasive in modern information systems. However, understanding how a graph changes in time is difficult. We present here two techniques for simplified visualization of dynamic graphs using edge bundles. The first technique uses a recent image-based graph bundling met
Helical twist controls the thickness of F-actin bundles
Claessens, M.M.A.E.; Semmrich, C.; Ramos, L.; Bausch, A.R.
2008-01-01
In the presence of condensing agents such as nonadsorbing polymer, multivalent counter ions, and specific bundling proteins, chiral biopolymers typically form bundles with a finite thickness, rather than phase-separating into a polymer-rich phase. Although short-range repulsive interactions or geome
Lexical Bundles in L1 and L2 Academic Writing
Chen, Yu-Hua; Baker, Paul
2010-01-01
This paper adopts an automated frequency-driven approach to identify frequently-used word combinations (i.e., "lexical bundles") in academic writing. Lexical bundles retrieved from one corpus of published academic texts and two corpora of student academic writing (one L1, the other L2), were investigated both quantitatively and qualitatively.…
Lexical Bundles: Facilitating University "Talk" in Group Discussions
Heng, Chan Swee; Kashiha, Hadi; Tan, Helen
2014-01-01
Group discussion forms an integral language experience for most language learners, providing them with an opportunity to express themselves in a naturalistic setting. Multi-word expressions are commonly used and one of them is lexical bundles. Lexical bundles are types of extended collocations that occur more commonly than we expect; they are…
Vector bundles of rank 2 computing Clifford indices
Lange, H
2010-01-01
Clifford indices of vector bundles on algebraic curves were introduced in a previous paper of the authors. In this paper we study bundles of rank 2 which compute these Clifford indices. This is of particular interest in the light of recently discovered counterexamples to a conjecture of Mercat.
On the general elephant conjecture for Mori conic bundles
Prokhorov, Yu G
1996-01-01
Let $f:X\\to S$ be an extremal contraction from a threefolds with terminal singularities onto a surface (so called Mori conic bundle). We study some particular cases of such contractions: quotients of usual conic bundles and index two contractions. Assuming Reid's general elephants conjecture we also obtain a rough classification. We present many examples.
Subanalytic Bundles and Tubular Neighbourhoods of Zero-Loci
Vishwambhar Pati
2003-08-01
We introduce the natural and fairly general notion of a subanalytic bundle (with a finite dimensional vector space of sections) on a subanalytic subset of a real analytic manifold , and prove that when is compact, there is a Baire subset of sections in whose zero-loci in have tubular neighbourhoods, homeomorphic to the restriction of the given bundle to these zero-loci.
Computational imaging through a fiber-optic bundle
Lodhi, Muhammad A.; Dumas, John Paul; Pierce, Mark C.; Bajwa, Waheed U.
2017-05-01
Compressive sensing (CS) has proven to be a viable method for reconstructing high-resolution signals using low-resolution measurements. Integrating CS principles into an optical system allows for higher-resolution imaging using lower-resolution sensor arrays. In contrast to prior works on CS-based imaging, our focus in this paper is on imaging through fiber-optic bundles, in which manufacturing constraints limit individual fiber spacing to around 2 μm. This limitation essentially renders fiber-optic bundles as low-resolution sensors with relatively few resolvable points per unit area. These fiber bundles are often used in minimally invasive medical instruments for viewing tissue at macro and microscopic levels. While the compact nature and flexibility of fiber bundles allow for excellent tissue access in-vivo, imaging through fiber bundles does not provide the fine details of tissue features that is demanded in some medical situations. Our hypothesis is that adapting existing CS principles to fiber bundle-based optical systems will overcome the resolution limitation inherent in fiber-bundle imaging. In a previous paper we examined the practical challenges involved in implementing a highly parallel version of the single-pixel camera while focusing on synthetic objects. This paper extends the same architecture for fiber-bundle imaging under incoherent illumination and addresses some practical issues associated with imaging physical objects. Additionally, we model the optical non-idealities in the system to get lower modelling errors.
Parabolic stable Higgs bundles over complete noncompact Riemann surfaces
李嘉禹; 王友德
1999-01-01
Let M be an open Riemann surface with a finite set of punctures, a complete Poincar(?)-like metric is introduced near the punctures and the equivalence between the stability of an indecomposable parabolic Higgs bundle, and the existence of a Hermitian-Einstein metric on the bundle is established.
Lexical Bundles in L1 and L2 Academic Writing
Chen, Yu-Hua; Baker, Paul
2010-01-01
This paper adopts an automated frequency-driven approach to identify frequently-used word combinations (i.e., "lexical bundles") in academic writing. Lexical bundles retrieved from one corpus of published academic texts and two corpora of student academic writing (one L1, the other L2), were investigated both quantitatively and qualitatively.…
An integral Riemann-Roch theorem for surface bundles
Madsen, Ib Henning
2010-01-01
This paper is a response to a conjecture by T. Akita about an integral Riemann–Roch theorem for surface bundles.......This paper is a response to a conjecture by T. Akita about an integral Riemann–Roch theorem for surface bundles....
On the Classification of Complex Vector Bundles of Stable Rank
Constantin Bǎnicǎ; Mihai Putinar
2006-08-01
One describes, using a detailed analysis of Atiyah–Hirzebruch spectral sequence, the tuples of cohomology classes on a compact, complex manifold, corresponding to the Chern classes of a complex vector bundle of stable rank. This classification becomes more effective on generalized flag manifolds, where the Lie algebra formalism and concrete integrability conditions describe in constructive terms the Chern classes of a vector bundle.
Bundled automobile insurance coverage and accidents.
Li, Chu-Shiu; Liu, Chwen-Chi; Peng, Sheng-Chang
2013-01-01
This paper investigates the characteristics of automobile accidents by taking into account two types of automobile insurance coverage: comprehensive vehicle physical damage insurance and voluntary third-party liability insurance. By using a unique data set in the Taiwanese automobile insurance market, we explore the bundled automobile insurance coverage and the occurrence of claims. It is shown that vehicle physical damage insurance is the major automobile coverage and affects the decision to purchase voluntary liability insurance coverage as a complement. Moreover, policyholders with high vehicle physical damage insurance coverage have a significantly higher probability of filing vehicle damage claims, and if they additionally purchase low voluntary liability insurance coverage, their accident claims probability is higher than those who purchase high voluntary liability insurance coverage. Our empirical results reveal that additional automobile insurance coverage information can capture more driver characteristics and driving behaviors to provide useful information for insurers' underwriting policies and to help analyze the occurrence of automobile accidents.
Habibi, Somayeh
2011-01-01
Let $G$ be a reductive algebraic group over a perfect field $k$ and $\\mathcal{G}$ a $G$-bundle over a scheme $X/k$. The main aim of this article is to study the motive associated with $\\mathcal{G}$, inside the Veovodsky Motivic categories. We consider the case that $\\charakt k=0$ (resp. $\\charakt k\\geq 0$), the motive associated to $X$ is geometrically mixed Tate (resp. geometrically cellular) and $\\mathcal{G}$ is locally trivial for the Zariski (resp. \\'etale) topology on $X$ and show that the motive of $\\mathcal{G}$ is a geometrically mixed Tate motive. Moreover for a general $X$ we construct a filtration on the motive associated to $\\mathcal{G}$ in terms of weight polytopes. Along the way we give some applications and examples.
Hahm, Myung Gwan; Wang, Hailong; Jung, Hyun Young; Hong, Sanghyun; Lee, Sung-Goo; Kim, Sung-Ryong; Upmanyu, Moneesh; Jung, Yung Joon
2012-06-01
High-density carbon nanotube networks (CNNs) continue to attract interest as active elements in nanoelectronic devices, nanoelectromechanical systems (NEMS) and multifunctional nanocomposites. The interplay between the network nanostructure and its properties is crucial, yet current understanding remains limited to the passive response. Here, we employ a novel superstructure consisting of millimeter-long vertically aligned single walled carbon nanotubes (SWCNTs) sandwiched between polydimethylsiloxane (PDMS) layers to quantify the effect of two classes of mechanical stimuli, film densification and stretching, on the electronic and thermal transport across the network. The network deforms easily with an increase in the electrical and thermal conductivities, suggestive of a floppy yet highly reconfigurable network. Insight from atomistically informed coarse-grained simulations uncover an interplay between the extent of lateral assembly of the bundles, modulated by surface zipping/unzipping, and the elastic energy associated with the bent conformations of the nanotubes/bundles. During densification, the network becomes highly interconnected yet we observe a modest increase in bundling primarily due to the reduced spacing between the SWCNTs. The stretching, on the other hand, is characterized by an initial debundling regime as the strain accommodation occurs via unzipping of the branched interconnects, followed by rapid rebundling as the strain transfers to the increasingly aligned bundles. In both cases, the increase in the electrical and thermal conductivity is primarily due to the increase in bundle size; the changes in network connectivity have a minor effect on the transport. Our results have broad implications for filamentous networks of inorganic nanoassemblies composed of interacting tubes, wires and ribbons/belts.
Heat transfer in a vertical 7-element bundle cooled with supercritical Freon-12
Richards, G.; Milner, A.; Pascoe, C.; Patel, H.; Peiman, W.; Saltanov, Eu. [Univ. of Ontario Inst. of Tech., Faculty of Energy Systems and Nuclear Science, Oshawa, Ontario (Canada); Pometko, R.S.; Opanasenko, A.N. [Inst. of Physics and Power Engineering, Obninsk (Russian Federation); Shelegov, A.S. [IATE, Obninsk (Russian Federation); Kirillov, P.L. [Inst. of Physics and Power Engineering, Obninsk (Russian Federation); Pioro, I. [Univ. of Ontario Inst. of Tech., Faculty of Energy Systems and Nuclear Science, Oshawa, Ontario (Canada)
2010-07-01
Currently, SuperCritical Water-cooled nuclear Reactor (SCWR) concepts are being developed worldwide with an objective to increase thermal efficiencies of future Nuclear Power Plants (NPPs) on 10 -15% compared to those of current water-cooled NPPs. With such an increase in the thermal efficiencies, SCW NPPs will be at the current level of the most advanced thermal power plants: coal-fired SCW NPPs and combined-cycle gas-fired NPPs. However, to be able to develop SCWRs at least several key technical problems should be resolved. One of these problems is limited amount of experimental data on heat transfer in fuel bundles and based on that SCW heat-transfer correlations. Experiments in SCW are very complicated and expensive due to high critical parameters of water (pressure 22.064 MPa and temperature 374.95°C). Moreover, there are only few SCW test rigs, which capable to perform experiments in full-scale bundles. As a preliminary approach supercritical-pressure heat-transfer experiments in bundles can be performed in modeling fluids such as Freons or carbon dioxide. Therefore, a set of experimental data was obtained in Freon-12-cooled bundle simulator at the Institute of Physics and Power Engineering (IPPE, Obninsk, Russia). A vertical 7-element bundle was installed in a hexagonal flow channel. The test section consisted of elements that were 9.5 mm in diameter with the total heated length of 1 m. Bulk-fluid and wall temperature profiles were recorded using thermocouples. Several heat-transfer regimes were tested. Also, this paper references thermophysical properties of supercritical Freon-12 at the critical pressure (4.1361 MPa) and test pressure of 4.65 MPa. (author)
A burnout correlation for flow of boiling water in vertical rod bundles
Becker, Kurt M.
1967-04-15
The rod bundle burnout correlation described in the present report is a development from our earlier published rod bundle correlation for low pressures. The correlation is based on the Becker round duct correlation and is written on the form x{sub BO} = 0.68*{eta}*{eta}{sub L}*X{sub RD} where x{sub RD} is the burnout steam quality in a round duc at corresponding flow conditions, {eta} is the ratio of heated to total perimeter and {eta}{sub l} is a correction factor, which is a function of q/A only. It is demonstrated that this equation combined with the heat balance equation q/A = G/(4L/D{sub H})*({delta}h{sub SUB} + X{sub BO}*H{sub fg}) predicts the burnout heat fluxes for 312 measurements obtained in our laboratory within a scatter of {+-}7. 5 per cent and with an RMS error of 3.8 per cent. The measurements were obtained in the following ranges of variables. Number of rods n 1, 3, 6 and 7; Rod diameter d{sub i} 10.05 - 13.80 mm; Shroud diameter d{sub o} 17. 42 - 71. 0 mm; Rod clearance s 3.7 - 8.8 mm; Heated length L 608 - 4440 mm; Pressure p 20-71 kg/cm{sup 2}, Inlet sub-cooling {delta}t{sub sub} 3 - 240 deg C; Mass velocity G 80-1,500 kg/m{sup 2}; Burnout heat flux q/A 74-314 W/cm{sup 2}; Burnout steam quality x{sub BO} 0. 1 - 0.55. The correlation shows that the burnout conditions in wide ranges of variables are independent of the inlet sub-cooling and the heated length, and that the effects of mass velocity and pressure are the same in rod bundles and in round tubes. It is also demonstrated that the effects of a radial heat flux variation within the rod bundle can be handled by the correlation by modifying the {eta}-value for the bundle. The rod bundle data presented by Janssen and Kervinen, Hench, Obertelli, Matzner, Haslam, Edwards and Obertelli and Hench and Boehm were also analysed in terms of the measured and predicted burnout heat fluxes. These data covered bundles consisting of 3, 4, 6, 7, 9. 19 and 36 rods and it was found that a very good agreement
Artificial ciliary bundles with nano fiber tip links
Asadnia, Mohsen; Miao, Jianmin; Triantafyllou, Michael
2015-01-01
Mechanosensory ciliary bundles in fishes are the inspiration for carefully engineered artificial flow sensors. We report the development of a new class of ultrasensitive MEMS flow sensors that mimic the intricate morphology of the ciliary bundles, including the stereocilia, tip links, and the cupula, and thereby achieve threshold detection limits that match the biological example. An artificial ciliary bundle is achieved by fabricating closely-spaced arrays of polymer micro-pillars with gradiating heights. Tip links that form the fundamental sensing elements are realized through electrospinning aligned PVDF piezoelectric nano-fibers that link the distal tips of the polymer cilia. An optimized synthesis of hyaluronic acid-methacrylic anhydride hydrogel that results in properties close to the biological cupula, together with drop-casting method are used to form the artificial cupula that encapsulates the ciliary bundle. In testing, fluid drag force causes the ciliary bundle to slide, stretching the flexible nan...
HORIZONTAL LAPLACE OPERATOR IN REAL FINSLER VECTOR BUNDLES
无
2008-01-01
A vector bundle F over the tangent bundle TM of a manifold M is said to be a Finsler vector bundle if it is isomorphic to the pull-back π*E of a vector bundle E over M([1]). In this article the authors study the h-Laplace operator in Finsler vector bundles.An h-Laplace operator is defined, first for functions and then for horizontal Finsler forms on E. Using the h-Laplace operator, the authors define the h-harmonic function and h-harmonic horizontal Finsler vector fields, and furthermore prove some integral formulas for the h-Laplace operator, horizontal Finsler vector fields, and scalar fields on E.
The 2-Hilbert Space of a Prequantum Bundle Gerbe
Bunk, Severin; Szabo, Richard J
2016-01-01
We construct a prequantum 2-Hilbert space for any line bundle gerbe whose Dixmier-Douady class is torsion. Analogously to usual prequantisation, this 2-Hilbert space has the category of sections of the line bundle gerbe as its underlying 2-vector space. These sections are obtained as certain morphism categories in Waldorf's version of the 2-category of line bundle gerbes. We show that these morphism categories carry a monoidal structure under which they are semisimple and abelian. We introduce a dual functor on the sections, which yields a closed structure on the morphisms between bundle gerbes and turns the category of sections into a 2-Hilbert space. We discuss how these 2-Hilbert spaces fit various expectations from higher prequantisation. We then extend the transgression functor to the full 2-category of bundle gerbes and demonstrate its compatibility with the additional structures introduced. We discuss various aspects of Kostant-Souriau prequantisation in this setting, including its dimensional reductio...
Bundles over Quantum RealWeighted Projective Spaces
Tomasz Brzeziński
2012-09-01
Full Text Available The algebraic approach to bundles in non-commutative geometry and the definition of quantum real weighted projective spaces are reviewed. Principal U(1-bundles over quantum real weighted projective spaces are constructed. As the spaces in question fall into two separate classes, the negative or odd class that generalises quantum real projective planes and the positive or even class that generalises the quantum disc, so do the constructed principal bundles. In the negative case the principal bundle is proven to be non-trivial and associated projective modules are described. In the positive case the principal bundles turn out to be trivial, and so all the associated modules are free. It is also shown that the circle (coactions on the quantum Seifert manifold that define quantum real weighted projective spaces are almost free.
Morse theory for the space of Higgs G-bundles
Biswas, Indranil
2010-01-01
Fix a $C^\\infty$ principal $G$--bundle $E^0_G$ on a compact connected Riemann surface $X$, where $G$ is a connected complex reductive linear algebraic group. We consider the gradient flow of the Yang--Mills--Higgs functional on the cotangent bundle of the space of all smooth connections on $E^0_G$. We prove that this flow preserves the subset of Higgs $G$--bundles, and, furthermore, the flow emanating from any point of this subset has a limit. Given a Higgs $G$--bundle, we identify the limit point of the integral curve passing through it. These generalize the results of the second named author on Higgs vector bundles.
[Bundle-branch block depending on the heart rate].
Apostolov, L
1975-01-01
Five patients are reported, admitted to the hospital, with diseases predominantly of the cardio-vascular system. During the electrocardiographic examinations bundle branch block was established, depending on heart rate. It fluctuated within the physiological limits from 50 to 90/min. In three of the patients, the bundle branch block appeared with the quickening of the heart rate (tachycardia-depending bundle branch block) and in two of the patients--the bundle branch block appeared during the slowing down of the heart action and disappeared with its quickening (bradicardia-depending bundle branch block). A brief literature review is presented and attention is paid to the possible diagnostic errors and the treatment mode of those patients with cardiac tonic and antiarrhythmic medicaments.
Voltage- and calcium-dependent motility of saccular hair bundles
Quiñones, Patricia M.; Meenderink, Sebastiaan W. F.; Bozovic, Dolores
2015-12-01
Active bundle motility, which is hypothesized to supply feedback for mechanical amplification of signals, is thought to enhance sensitivity and sharpen tuning in vestibular and auditory organs. To study active hair bundle motility, we combined high-speed camera recordings of bullfrog sacculi, which were mounted in a two-compartment chamber, and voltage-clamp of the hair cell membrane potential. Using this paradigm, we measured three types of bundle motions: 1) spontaneous oscillations which can be analyzed to measure the physiological operating range of the transduction channel; 2) a sustained quasi-static movement of the bundle that depends on membrane potential; and 3) a fast, transient and asymmetric movement that resets the bundle position and depends on changes in the membrane potential. These data support a role for both calcium and voltage in the transduction-channel function.
CHF Enhancement of Advanced 37-Element Fuel Bundles
Joo Hwan Park
2015-01-01
Full Text Available A standard 37-element fuel bundle (37S fuel bundle has been used in commercial CANDU reactors for over 40 years as a reference fuel bundle. Most CHF of a 37S fuel bundle have occurred at the elements arranged in the inner pitch circle for high flows and at the elements arranged in the outer pitch circle for low flows. It should be noted that a 37S fuel bundle has a relatively small flow area and high flow resistance at the peripheral subchannels of its center element compared to the other subchannels. The configuration of a fuel bundle is one of the important factors affecting the local CHF occurrence. Considering the CHF characteristics of a 37S fuel bundle in terms of CHF enhancement, there can be two approaches to enlarge the flow areas of the peripheral subchannels of a center element in order to enhance CHF of a 37S fuel bundle. To increase the center subchannel areas, one approach is the reduction of the diameter of a center element, and the other is an increase of the inner pitch circle. The former can increase the total flow area of a fuel bundle and redistributes the power density of all fuel elements as well as the CHF. On the other hand, the latter can reduce the gap between the elements located in the middle and inner pitch circles owing to the increasing inner pitch circle. This can also affect the enthalpy redistribution of the fuel bundle and finally enhance CHF or dry-out power. In this study, the above two approaches, which are proposed to enlarge the flow areas of the center subchannels, were considered to investigate the impact of the flow area changes of the center subchannels on the CHF enhancement as well as the thermal characteristics by applying a subchannel analysis method.
Schalk, S.
1999-01-01
In contrast to the neo-classical theory of Arrow and Debreu, a model of a private ownership economy is presented, in which production and consumption bundles are treated separately. Each of the two types of bundles is assumed to establish a con- vex cone. Production technologies can convert producti
Schalk, S.
1999-01-01
In contrast to the neo-classical theory of Arrow and Debreu, a model of a private ownership economy is presented, in which production and consumption bundles are treated separately. Each of the two types of bundles is assumed to establish a con- vex cone. Production technologies can convert
Consistent model driven architecture
Niepostyn, Stanisław J.
2015-09-01
The goal of the MDA is to produce software systems from abstract models in a way where human interaction is restricted to a minimum. These abstract models are based on the UML language. However, the semantics of UML models is defined in a natural language. Subsequently the verification of consistency of these diagrams is needed in order to identify errors in requirements at the early stage of the development process. The verification of consistency is difficult due to a semi-formal nature of UML diagrams. We propose automatic verification of consistency of the series of UML diagrams originating from abstract models implemented with our consistency rules. This Consistent Model Driven Architecture approach enables us to generate automatically complete workflow applications from consistent and complete models developed from abstract models (e.g. Business Context Diagram). Therefore, our method can be used to check practicability (feasibility) of software architecture models.
Jijun Qiu
2014-01-01
Full Text Available Flower-like bundles of ZnO nanosheets have been prepared by using preheating hydrothermal process without any surfactants. The flower-like bundles consist of many thin and uniform hexagonal-structured ZnO nanosheets, with a thickness of 50 nm. The selected area electronic diffraction (SAED and high-resolution transmission electron microscope (HRTEM images indicate that the ZnO nanosheets are single crystal in nature. The growth mechanism of the flower-like bundles of ZnO nanosheets is discussed based on the morphology evolution with growth times and reaction conditions. It is believed that the formation of flower-like bundles of ZnO nanosheets is related to the shielding effect of OH− ions and the self-assembly process, which is dominated by a preheating time. Room temperature photoluminescence spectra results show that the annealing atmosphere strongly affects the visible emission band, which is sensitive to intrinsic and surface defects, especially oxygen interstitials, in flower-like bundles of ZnO nanosheets.
Bundling Actin Filaments From Membranes: Some Novel Players
Clément eThomas
2012-08-01
Full Text Available Progress in live-cell imaging of the cytoskeleton has significantly extended our knowledge about the organization and dynamics of actin filaments near the plasma membrane of plant cells. Noticeably, two populations of filamentous structures can be distinguished. On the one hand, fine actin filaments which exhibit an extremely dynamic behavior basically characterized by fast polymerization and prolific severing events, a process referred to as actin stochastic dynamics. On the other hand, thick actin bundles which are composed of several filaments and which are comparatively more stable although they constantly remodel as well. There is evidence that the actin cytoskeleton plays critical roles in trafficking and signaling at both the cell cortex and organelle periphery but the exact contribution of actin bundles remains unclear. A common view is that actin bundles provide the long-distance tracks used by myosin motors to deliver their cargo to growing regions and accordingly play a particularly important role in cell polarization. However, several studies support that actin bundles are more than simple passive highways and display multiple and dynamic roles in the regulation of many processes, such as cell elongation, polar auxin transport, stomatal and chloroplast movement, and defense against pathogens. The list of identified plant actin-bundling proteins is ever expanding, supporting that plant cells shape structurally and functionally different actin bundles. Here I review the most recently characterized actin-bundling proteins, with a particular focus on those potentially relevant to membrane trafficking and/or signaling.
Alexey G. Abramov
2015-12-01
Full Text Available Results of the numerical simulation of turbulent flow field and heat transfer of liquid metal in cross-flow over inline tube bundles consisting of smooth round tubes are presented. Computations have been performed with CFD-code ANSYS Fluent on the base of a two-dimensional unsteady RANS formulation using the SST turbulence model by Menter and assuming constant physical properties of a fluid with the Prandtl number equal to 0.023. The Reynolds number ranged from 26,200 to 52,400. Instantaneous and time-averaged velocity and temperature fields obtained for bundles of different intertube spacing with a variation of the bundle width (number of tube rows in the cross direction were analyzed. Integral characteristics of heat transfer were compared with the experimental data.
The WUW ML bundle detector A flow through detector for alpha-emitters
Wenzel, U; Lochny, M
1999-01-01
Using conventional laboratory ware, we designed and manufactured a flow through cell for monitoring alpha-bearing solutions. The cell consists of a bundle of thermoplastic, transparent tubes coated with a thin layer of the meltable scintillator MELTILEX sup T sup M at the inner surface. With appropriate energy windows set, the detector can suppress beta-particles to a great extent due to its geometrical dimensions. For pure alpha-solutions, the detection limits are 5 Bq/ml, for composite nuclide mixtures, the detector is capable to monitor the decontamination of medium active waste (<=10 sup 7 Bq/ml) down to 100 Bq alpha/g solution. At a throughput of 1 ml/s, the pressure build-up amounts to approx 2 bar. We have developed a quality control program to ensure the regularity of the individual bundle loops.
No consistent bimetric gravity?
Deser, S; Waldron, A
2013-01-01
We discuss the prospects for a consistent, nonlinear, partially massless (PM), gauge symmetry of bimetric gravity (BMG). Just as for single metric massive gravity, ultimate consistency of both BMG and the putative PM BMG theory relies crucially on this gauge symmetry. We argue, however, that it does not exist.
Bondage Numbers of C4 Bundles over a Cycle Cn
Moo Young Sohn
2013-01-01
Full Text Available Graph bundles generalize the notion of covering graphs and graph products. Graph bundles have been applied in computer architecture and communication networks. The bondage number is an important parameter for measuring the vulnerability and stability of the network domination under link failure. The bondage number b(G of a graph G is the minimum number of edges whose removal enlarges the domination number. In this paper, we show that the bondage number of every C4 bundles over a cycle Cn (n≥4 is equal to 4.
The Born rule as structure of spectral bundles (extended abstract
Bertfried Fauser
2012-10-01
Full Text Available Topos approaches to quantum foundations are described in a unified way by means of spectral bundles, where the base space is a space of contexts and each fibre is its spectrum. Differences in variance are due to the bundle being a fibration or opfibration. Relative to this structure, the probabilistic predictions of the Born rule in finite dimensional settings are then described as a section of a bundle of valuations. The construction uses in an essential way the geometric nature of the valuation locale monad.
—Impact of Customer Knowledge Heterogeneity on Bundling Strategy
Amiya Basu; Padmal Vitharana
2009-01-01
We consider a marketer of components who can select one of three alternative pricing strategies: (1) a pure component strategy (i.e., the customer can only buy the components individually), (2) a pure bundling strategy (i.e., the components must be purchased together), or (3) a mixed bundling strategy (i.e., the customer may buy a component individually, or buy the bundle). We consider a market where customer knowledge of components varies and propose that a high-knowledge customer can determ...
Systematic evaluation of bundled SPC water for biomolecular simulations.
Gopal, Srinivasa M; Kuhn, Alexander B; Schäfer, Lars V
2015-04-07
In bundled SPC water models, the relative motion of groups of four water molecules is restrained by distance-dependent potentials. Bundled SPC models have been used in hybrid all-atom/coarse-grained (AA/CG) multiscale simulations, since they enable to couple atomistic SPC water with supra-molecular CG water models that effectively represent more than a single water molecule. In the present work, we systematically validated and critically tested bundled SPC water models as solvent for biomolecular simulations. To that aim, we investigated both thermodynamic and structural properties of various biomolecular systems through molecular dynamics (MD) simulations. Potentials of mean force of dimerization of pairs of amino acid side chains as well as hydration free energies of single side chains obtained with bundled SPC and standard (unrestrained) SPC water agree closely with each other and with experimental data. Decomposition of the hydration free energies into enthalpic and entropic contributions reveals that in bundled SPC, this favorable agreement of the free energies is due to a larger degree of error compensation between hydration enthalpy and entropy. The Ramachandran maps of Ala3, Ala5, and Ala7 peptides are similar in bundled and unrestrained SPC, whereas for the (GS)2 peptide, bundled water leads to a slight overpopulation of extended conformations. Analysis of the end-to-end distance autocorrelation times of the Ala5 and (GS)2 peptides shows that sampling in more viscous bundled SPC water is about two times slower. Pronounced differences between the water models were found for the structure of a coiled-coil dimer, which is instable in bundled SPC but not in standard SPC. In addition, the hydration of the active site of the serine protease α-chymotrypsin depends on the water model. Bundled SPC leads to an increased hydration of the active site region, more hydrogen bonds between water and catalytic triad residues, and a significantly slower exchange of water
Shatz, L F
2000-03-01
The relationship between size and shape of the hair bundle of a hair cell in the inner ear and its sensitivity at asymptotically high and low frequencies was determined, thereby extending the results of an analysis of hair bundle hydrodynamics in two dimensions (Freeman and Weiss, 1990. Hydrodynamic analysis of a two-dimensional model for micromechanical resonance of free-standing hair bundles. Hear. Res. 48, 37-68) to three dimensions. A hemispheroid was used to represent the hair bundle. The hemispheroid had a number of advantages: it could represent shapes that range from thin, pencil-like shapes, to wide, flat, disk-like shapes. Also analytic methods could be used in the high frequency range to obtain an exact solution to the equations of motion. In the low frequency range, where an approximate solution was found using boundary element methods, the sensitivity of the responses of hair cells was mainly proportional to the cube of the heights of their hair bundles, and at high frequencies, the sensitivity of the hair cells was mainly proportional to the inverse of their heights. An excellent match was obtained between measurements of sensitivity curves in the basillar papilla of the alligator and bobtail lizards and the model's predictions. These results also suggest why hair bundles of hair cells in vestibular organs which are sensitive to low frequencies have ranges of heights that are an order of magnitude larger than the range of heights of hair bundles of hair cells found in auditory organs.
A study of bacterial flagellar bundling.
Flores, Heather; Lobaton, Edgar; Méndez-Diez, Stefan; Tlupova, Svetlana; Cortez, Ricardo
2005-01-01
Certain bacteria, such as Escherichia coli (E. coli) and Salmonella typhimurium (S. typhimurium), use multiple flagella often concentrated at one end of their bodies to induce locomotion. Each flagellum is formed in a left-handed helix and has a motor at the base that rotates the flagellum in a corkscrew motion. We present a computational model of the flagellar motion and their hydrodynamic interaction. The model is based on the equations of Stokes flow to describe the fluid motion. The elasticity of the flagella is modeled with a network of elastic springs while the motor is represented by a torque at the base of each flagellum. The fluid velocity due to the forces is described by regularized Stokeslets and the velocity due to the torques by the associated regularized rotlets. Their expressions are derived. The model is used to analyze the swimming motion of a single flagellum and of a group of three flagella in close proximity to one another. When all flagellar motors rotate counterclockwise, the hydrodynamic interaction can lead to bundling. We present an analysis of the flow surrounding the flagella. When at least one of the motors changes its direction of rotation, the same initial conditions lead to a tumbling behavior characterized by the separation of the flagella, changes in their orientation, and no net swimming motion. The analysis of the flow provides some intuition for these processes.
Nursing Care Management: Influence on Bundled Payments.
Lentz, Shaynie; Luther, Brenda
Fragmented and uncoordinated care is the third highest driver of U.S. healthcare costs. Although less than 10% of patients experience uncoordinated care, these patients represent 36% of total healthcare costs; care management interaction makes a significant impact on the utilization of healthcare dollars. A literature search was conducted to construct a model of care coordination for elective surgical procedures by collecting best practices for acute, transitions, and post-acute care periods. A case study was used to demonstrate the model developed. Care management defines care coordination as a model of care to address improving patient and caregiver engagement, communication across settings of care, and ultimately improved patient outcomes of care. Nurse-led care coordination in the presurgical, inpatient, and post-acute care settings requires systems change and administrative support to effectively meet the goals of the Affordable Care Act of reducing redundancy and costs while improving the patient experience. Nursing is the lynchpin of care management processes in all settings of care; thus, this model of care coordination for elective surgical admissions can provide nursing care management leaders a comprehensive view of coordinating care for these patient across settings of care during the predetermined time period of care. As bundled payment structures increasingly affect hospital systems, nursing leaders need to be ready to create or improve their care management processes; care coordination is one such process requiring immediate attention.
LVRF fuel bundle manufacture for Bruce
Pant, A. [Zircatec Precision Industries, Port Hope, Ontario (Canada)
2005-12-15
In response to the Power Uprate program at Bruce Power, Zircatec has committed to introduce, by Spring 2006 a new manufacturing line for the production of 43 element Bruce LVRF bundles containing Slightly Enriched Uranium (SEU) with a centre pin of blended dysprosia/urania (BDU). This is a new fuel design and is the first change in fuel design since the introduction of the current 37-element fuel over 20 years ago. Introduction of this new line has involved the introduction of significant changes to an environment that is not used to rapid changes with significant impact. At ZPI we have been able to build on our innovative capabilities in new fuel manufacturing, the strength and experience of our core team, and on our prevailing management philosophy of 'support the doer'. The presentation will discuss some of the novel aspects of this fuel introduction and the mix of innovative and classical project management methods that are being used to ensure that project deliveries are being met. Supporting presentations will highlight some of the issues in more detail. (author)
Correlation of cervical vertebra maturation with hand-wrist maturation in children.
Chang, H P; Liao, C H; Yang, Y H; Chang, H F; Chen, K C
2001-01-01
The purpose of this study was to evaluate the reliability of cervical vertebra maturation as an indicator of skeletal age during the circumpubertal period. This was determined by correlating cervical vertebra maturation to hand-wrist maturation. The vertebral skeletal age was assessed using lateral cephalometric radiographs according to maturity indicators modified from Lamparski. The hand-wrist skeletal age was evaluated in radiographs with the system developed by Fishman. The sample consisted of 503 subjects (244 boys and 259 girls), aged 8 through 18 years. The Spearman rank correlation coefficients and Wilcoxon sign rank test showed that a statistically significant relationship existed between the two assessments. Both the intra- and inter-judge tests of reliability displayed no significant differences. The results of this study indicate that skeletal age assessment made from the maturational changes of cervical vertebrae were reliable, reproducible and valid.
Hiscock, S.
1986-07-01
The importance of consistency in coal quality has become of increasing significance recently, with the current trend towards using coal from a range of sources. A significant development has been the swing in responsibilities for coal quality. The increasing demand for consistency in quality has led to a re-examination of where in the trade and transport chain the quality should be assessed and where further upgrading of inspection and preparation facilities are required. Changes are in progress throughout the whole coal transport chain which will improve consistency of delivered coal quality. These include installation of beneficiation plant at coal mines, export terminals, and on the premises of end users. It is suggested that one of the keys to success for the coal industry will be the ability to provide coal of a consistent quality.
Kent, A
1996-01-01
In the consistent histories formulation of quantum theory, the probabilistic predictions and retrodictions made from observed data depend on the choice of a consistent set. We show that this freedom allows the formalism to retrodict several contradictory propositions which correspond to orthogonal commuting projections and which all have probability one. We also show that the formalism makes contradictory probability one predictions when applied to generalised time-symmetric quantum mechanics.
Propagation velocity profile in a cross-section of a cardiac muscle bundle from PSpice simulation
Sperelakis Nicholas
2006-08-01
Full Text Available Abstract Background The effect of depth on propagation velocity within a bundle of cardiac muscle fibers is likely to be an important factor in the genesis of some heart arrhythmias. Model and methods The velocity profile of simulated action potentials propagated down a bundle of parallel cardiac muscle fibers was examined in a cross-section of the bundle using a PSpice model. The model (20 × 10 consisted of 20 chains in parallel, each chain being 10 cells in length. All 20 chains were stimulated simultaneously at the left end of the bundle using rectangular current pulses (0.25 nA, 0.25 ms duration applied intracellularly. The simulated bundle was symmetrical at the top and bottom (including two grounds, and voltage markers were placed intracellularly only in cells 1, 5 and 10 of each chain to limit the total number of traces to 60. All electrical parameters were standard values; the variables were (1 the number of longitudinal gap-junction (G-j channels (0, 1, 10, 100, (2 the longitudinal resistance between the parallel chains (Rol2 (reflecting the closeness of the packing of the chains, and (3 the bundle termination resistance at the two ends of the bundle (RBT. The standard values for Rol2 and RBT were 200 KΩ. Results The velocity profile was bell-shaped when there was 0 or only 1 gj-channel. With standard Rol2 and RBT values, the velocity at the surface of the bundle (θ1 and θ20 was more than double (2.15 × that at the core of the bundle (θ10, θ11. This surface:core ratio of velocities was dependent on the values of Rol2 and RBT. When Rol2 was lowered 10-fold, θ1 increased slightly and θ2decreased slightly. When there were 100 gj-channels, the velocity profile was flat, i.e. the velocity at the core was about the same as that at the surface. Both velocities were more than 10-fold higher than in the absence of gj-channels. Varying Rol2 and RBT had almost no effect. When there were 10 gj-channels, the cross-sectional velocity profile
Zeta Functions for Elliptic Curves I. Counting Bundles
Weng, Lin
2012-01-01
To count bundles on curves, we study zetas of elliptic curves and their zeros. There are two types, i.e., the pure non-abelian zetas defined using moduli spaces of semi-stable bundles, and the group zetas defined for special linear groups. In lower ranks, we show that these two types of zetas coincide and satisfy the Riemann Hypothesis. For general cases, exposed is an intrinsic relation on automorphism groups of semi-stable bundles over elliptic curves, the so-called counting miracle. All this, together with Harder-Narasimhan, Desale-Ramanan and Zagier's result, gives an effective way to count semi-stable bundles on elliptic curves not only in terms of automorphism groups but more essentially in terms of their $h^0$'s. Distributions of zeros of high rank zetas are also discussed.
Bundles of Norms About Teen Sex and Pregnancy.
Mollborn, Stefanie; Sennott, Christie
2015-09-01
Teen pregnancy is a cultural battleground in struggles over morality, education, and family. At its heart are norms about teen sex, contraception, pregnancy, and abortion. Analyzing 57 interviews with college students, we found that "bundles" of related norms shaped the messages teens hear. Teens did not think their communities encouraged teen sex or pregnancy, but normative messages differed greatly, with either moral or practical rationalizations. Teens readily identified multiple norms intended to regulate teen sex, contraception, abortion, childbearing, and the sanctioning of teen parents. Beyond influencing teens' behavior, norms shaped teenagers' public portrayals and post hoc justifications of their behavior. Although norm bundles are complex to measure, participants could summarize them succinctly. These bundles and their conflicting behavioral prescriptions create space for human agency in negotiating normative pressures. The norm bundles concept has implications for teen pregnancy prevention policies and can help revitalize social norms for understanding health behaviors.
Design and synthesis of DNA four-helix bundles
Rangnekar, Abhijit; Gothelf, Kurt V [Department of Chemistry, Centre for DNA Nanotechnology (CDNA) and Interdisciplinary Nanoscience Center (iNANO), Aarhus University, DK-8000 Aarhus C (Denmark); LaBean, Thomas H, E-mail: kvg@chem.au.dk, E-mail: thl@cs.duke.edu [Department of Chemistry, Duke University, Durham, NC 27708 (United States)
2011-06-10
The field of DNA nanotechnology has evolved significantly in the past decade. Researchers have succeeded in synthesizing tile-based structures and using them to form periodic lattices in one, two and three dimensions. Origami-based structures have also been used to create nanoscale structures in two and three dimensions. Design and construction of DNA bundles with fixed circumference has added a new dimension to the field. Here we report the design and synthesis of a DNA four-helix bundle. It was found to be extremely rigid and stable. When several such bundles were assembled using appropriate sticky-ends, they formed micrometre-long filaments. However, when creation of two-dimensional sheet-like arrays of the four-helix bundles was attempted, nanoscale rings were observed instead. The exact reason behind the nanoring formation is yet to be ascertained, but it provides an exciting prospect for making programmable circular nanostructures using DNA.
CANFLEX fuel bundle cross-flow endurance test (test report)
Hong, Sung Deok; Chung, C. H.; Chang, S. K.; Kim, B. D.
1997-04-01
As part of the normal refuelling sequence of CANDU nuclear reactor, both new and irradiated bundles can be parked in the cross-flow region of the liner tubes. This situation occurs normally for a few minutes. The fuel bundle which is subjected to the cross-flow should be capable of withstanding the consequences of cross flow for normal periods, and maintain its mechanical integrity. The cross-flow endurance test was conducted for CANFLEX bundle, latest developed nuclear fuel, at CANDU-Hot Test Loop. The test was carried out during 4 hours at the inlet cross-flow region. After the test, the bundle successfully met all acceptance criteria after the 4 hours cross-flow test. (author). 2 refs., 3 tabs.
Steric effects induce geometric remodeling of actin bundles in filopodia
Dobramysl, Ulrich; Erban, Radek
2016-01-01
Filopodia are ubiquitous fingerlike protrusions, spawned by many eukaryotic cells, to probe and interact with their environments. Polymerization dynamics of actin filaments, comprising the structural core of filopodia, largely determine their instantaneous lengths and overall lifetimes. The polymerization reactions at the filopodial tip require transport of G-actin, which enter the filopodial tube from the filopodial base and diffuse toward the filament barbed ends near the tip. Actin filaments are mechanically coupled into a tight bundle by cross-linker proteins. Interestingly, many of these proteins are relatively short, restricting the free diffusion of cytosolic G-actin throughout the bundle and, in particular, its penetration into the bundle core. To investigate the effect of steric restrictions on G-actin diffusion by the porous structure of filopodial actin filament bundle, we used a particle-based stochastic simulation approach. We discovered that excluded volume interactions result in partial and the...
Mechanical Models of Microtubule Bundle Collapse in Alzheimer's Disease
Sendek, Austin; Singh, Rajiv; Cox, Daniel
2013-03-01
Amyloid-beta aggregates initiate Alzheimer's disease, and downstream trigger degradation of tau proteins that act as microtubule bundle stabilizers and mechanical spacers. Currently it is unclear which of tau cutting by proteases, tau phosphorylation, or tau aggregation are responsible for cytoskeleton degradation., We construct a percolation simulation of the microtubule bundle using a molecular spring model for the taus and including depletion force attraction between microtubules and membrane/actin cytoskeletal surface tension. The simulation uses a fictive molecular dynamics to model the motion of the individual microtubules within the bundle as a result of random tau removal, and calculates the elastic modulus of the bundle as the tau concentration falls. We link the tau removal steps to kinetic tau steps in various models of tau degradation. Supported by US NSF Grant DMR 1207624
Introductory lectures on fibre bundles and topology for physicists
Thomas, G.H.
1978-05-01
These lectures may provide useful background material for understanding gauge theories, particularly the nonperturbative effects such as instantons and monopoles. The mathematical language of topology and fibre bundles is introduced.
Improved Conjugate Gradient Bundle Adjustment of Dunhuang Wall Painting Images
Hu, K.; Huang, X.; You, H.
2017-09-01
Bundle adjustment with additional parameters is identified as a critical step for precise orthoimage generation and 3D reconstruction of Dunhuang wall paintings. Due to the introduction of self-calibration parameters and quasi-planar constraints, the structure of coefficient matrix of the reduced normal equation is banded-bordered, making the solving process of bundle adjustment complex. In this paper, Conjugate Gradient Bundle Adjustment (CGBA) method is deduced by calculus of variations. A preconditioning method based on improved incomplete Cholesky factorization is adopt to reduce the condition number of coefficient matrix, as well as to accelerate the iteration rate of CGBA. Both theoretical analysis and experimental results comparison with conventional method indicate that, the proposed method can effectively conquer the ill-conditioned problem of normal equation and improve the calculation efficiency of bundle adjustment with additional parameters considerably, while maintaining the actual accuracy.
IMPROVED CONJUGATE GRADIENT BUNDLE ADJUSTMENT OF DUNHUANG WALL PAINTING IMAGES
K. Hu
2017-09-01
Full Text Available Bundle adjustment with additional parameters is identified as a critical step for precise orthoimage generation and 3D reconstruction of Dunhuang wall paintings. Due to the introduction of self-calibration parameters and quasi-planar constraints, the structure of coefficient matrix of the reduced normal equation is banded-bordered, making the solving process of bundle adjustment complex. In this paper, Conjugate Gradient Bundle Adjustment (CGBA method is deduced by calculus of variations. A preconditioning method based on improved incomplete Cholesky factorization is adopt to reduce the condition number of coefficient matrix, as well as to accelerate the iteration rate of CGBA. Both theoretical analysis and experimental results comparison with conventional method indicate that, the proposed method can effectively conquer the ill-conditioned problem of normal equation and improve the calculation efficiency of bundle adjustment with additional parameters considerably, while maintaining the actual accuracy.
Vertical, Bubbly, Cross-Flow Characteristics over Tube Bundles
Iwaki, C.; Cheong, K. H.; Monji, H.; Matsui, G.
2005-12-01
Two-phase flow over tube bundles is commonly observed in shell and tube-type heat exchangers. However, only limited amount of data concerning flow pattern and void fraction exists due to the flow complexity and the difficulties in measurement. The detailed flow structure in tube bundles needs to be understood for reliable and effective design. Therefore, the objective of this study was to clarify the two-phase structure of cross-flow in tube bundles by PIV. Experiments were conducted using two types of models, namely in-line and staggered arrays with a pitch-to-diameter ratio of 1.5. Each test section contains 20 rows of five 15 mm O.D. tubes in each row. The experiment’s data were obtained under very low void fraction (αtube bundles were described in terms of the velocity vector field, turbulence intensity and void fraction.
National Partnership for Maternal Safety: Consensus Bundle on Obstetric Hemorrhage.
Main, Elliott K; Goffman, Dena; Scavone, Barbara M; Low, Lisa Kane; Bingham, Debra; Fontaine, Patricia L; Gorlin, Jed B; Lagrew, David C; Levy, Barbara S
2015-07-01
Hemorrhage is the most frequent cause of severe maternal morbidity and preventable maternal mortality and therefore is an ideal topic for the initial national maternity patient safety bundle. These safety bundles outline critical clinical practices that should be implemented in every maternity unit. They are developed by multidisciplinary work groups of the National Partnership for Maternal Safety under the guidance of the Council on Patient Safety in Women's Health Care. The safety bundle is organized into four domains: Readiness, Recognition and Prevention, Response, and Reporting and System Learning. Although the bundle components may be adapted to meet the resources available in individual facilities, standardization within an institution is strongly encouraged. References contain sample resources and "Potential Best Practices" to assist with implementation.
National Partnership for Maternal Safety Consensus Bundle on Obstetric Hemorrhage.
Main, Elliott K; Goffman, Dena; Scavone, Barbara M; Low, Lisa Kane; Bingham, Debra; Fontaine, Patricia L; Gorlin, Jed B; Lagrew, David C; Levy, Barbara S
2015-01-01
Hemorrhage is the most frequent cause of severe maternal morbidity and preventable maternal mortality and therefore is an ideal topic for the initial national maternity patient safety bundle. These safety bundles outline critical clinical practices that should be implemented in every maternity unit. They are developed by multidisciplinary work groups of the National Partnership for Maternal Safety under the guidance of the Council on Patient Safety in Women's Health Care. The safety bundle is organized into 4 domains: Readiness, Recognition and Prevention, Response, and Reporting and Systems Learning. Although the bundle components may be adapted to meet the resources available in individual facilities, standardization within an institution is strongly encouraged. References contain sample resources and "Potential Best Practices" to assist with implementation.
Performance-based bundled payments: potential benefits and burdens.
Satin, David J; Miles, Justin
2009-10-01
Performance-based bundled payments have emerged as the most recent iteration of pay for performance. These are programs in which providers are paid a single fee for a set of evidenced-based services related to a diagnosis. The payments are typically linked to outcomes as well as other quality measures. This paper reviews two prominent bundled payment programs--PROMETHEUS and ProvenCare--and discusses the potential pitfalls of these approaches.
Codimension-Three Bundle Singularities in F-Theory
Candelas, Philip; Florea, B; Morrison, Douglas Robert Ogston; Rajesh, G; Candelas, Philip; Diaconescu, Duiliu-Emanuel; Florea, Bogdan; Morrison, David R.; Rajesh, Govindan
2002-01-01
We study new nonperturbative phenomena in N=1 heterotic string vacua corresponding to pointlike bundle singularities in codimension three. These degenerations result in new four-dimensional infrared physics characterized by light solitonic states whose origin is explained in the dual F-theory model. We also show that such phenomena appear generically in $E_7 \\to E_6$ Higgsing and describe in detail the corresponding bundle transition.
Generalized holomorphic bundles and the B-field action
Hitchin, Nigel
2010-01-01
On a generalized complex manifold there is an associated definition of a generalized holomorphic bundle, introduced by Gualtieri. This notion in the case of an ordinary complex structure yields an object which we call a co-Higgs bundle and we consider the B-field action of a closed form of type (1,1), both local and global. The effect makes contact with both Nahm's equations and holomorphic gerbes.
Generalized holomorphic bundles and the B-field action
Hitchin, Nigel
2011-01-01
On a generalized complex manifold, there is an associated definition of a generalized holomorphic bundle, introduced by Gualtieri. In the case of an ordinary complex structure, this notion yields an object which we call a co-Higgs bundle, and we consider the B-field action of a closed form of type (1,1), both local and global. The effect makes contact with both Nahm's equations and holomorphic gerbes.
Simplified modeling of EM field coupling to complex cable bundles
Schetelig, B.; J. Keghie; Kanyou Nana, R.; Fichte, L.-O.; S. Potthast; Dickmann, S.
2010-01-01
In this contribution, the procedure "Equivalent Cable Bundle Method" is used for the simplification of large cable bundles, and it is extended to the application on differential signal lines. The main focus is on the reduction of twisted-pair cables. Furthermore, the process presented here allows to take into account cables with wires that are situated quite close to each other. The procedure is based on a new approach to calculate the geometry of the simplified cable and us...
Dunkl Operators as Covariant Derivatives in a Quantum Principal Bundle
Micho Đurđevich; Stephen Bruce Sontz
2011-01-01
A quantum principal bundle is constructed for every Coxeter group acting on a finite-dimensional Euclidean space $E$, and then a connection is also defined on this bundle. The covariant derivatives associated to this connection are the Dunkl operators, originally introduced as part of a program to generalize harmonic analysis in Euclidean spaces. This gives us a new, geometric way of viewing the Dunkl operators. In particular, we present a new proof of the commutativity of these operators amo...
The actin-bundling protein L-plastin dissociates CCR7 proximal signaling from CCR7-induced motility1
Morley, Sharon Celeste; Wang, Chen; Lo, Wan-Lin; Lio, Chan-Wang J.; Zinselmeyer, Bernd H.; Miller, Mark J.; Brown, Eric J.; Paul M Allen
2010-01-01
Chemokines promote lymphocyte motility by triggering F-actin rearrangements and inducing cellular polarization. Chemokines can also enhance cell-cell adhesion and co-stimulate T cells. Here we establish a requirement for the actin-bundling protein L-plastin (LPL) in CCR7- and S1P1-mediated T cell chemotaxis using LPL−/− mice. Disrupted motility of mature LPL−/− thymocytes manifested in vivo as diminished thymic egress. Two-photon microscopy of LPL−/− lymphocytes revealed reduced velocity and ...
Christiansen, Charlotte
2001-01-01
The paper aims to improve the knowledge of the empirical properties of the long maturity region of the forward rate curve. Firstly, the theoretical negative correlation between the slope at the long end of the forward rate curve and the term structure variance is recovered empirically and found...... to be statistically significant. Secondly, the expectations hypothesis is analyzed for the long maturity region of the forward rate curve using "forward rate" regressions. The expectations hypothesis is numerically close to being accepted but is statistically rejected. The findings provide mixed support...
PŠENIČKOVÁ, Nikola
2014-01-01
The bachelor thesis deals with school maturity of children and is aimed at pre-school children at the age of 6 years or, if necessary, older. The aim of this thesis is to capture the differences between children who start a year later than they were supposed to and children who went to enrolment for the first time and present the reasons for postponing the start of the school attendance. The theoretical part focuses on the issue of maturity of pre-school children and also deals with their rea...
BiSet: Semantic Edge Bundling with Biclusters for Sensemaking.
Sun, Maoyuan; Mi, Peng; North, Chris; Ramakrishnan, Naren
2016-01-01
Identifying coordinated relationships is an important task in data analytics. For example, an intelligence analyst might want to discover three suspicious people who all visited the same four cities. Existing techniques that display individual relationships, such as between lists of entities, require repetitious manual selection and significant mental aggregation in cluttered visualizations to find coordinated relationships. In this paper, we present BiSet, a visual analytics technique to support interactive exploration of coordinated relationships. In BiSet, we model coordinated relationships as biclusters and algorithmically mine them from a dataset. Then, we visualize the biclusters in context as bundled edges between sets of related entities. Thus, bundles enable analysts to infer task-oriented semantic insights about potentially coordinated activities. We make bundles as first class objects and add a new layer, "in-between", to contain these bundle objects. Based on this, bundles serve to organize entities represented in lists and visually reveal their membership. Users can interact with edge bundles to organize related entities, and vice versa, for sensemaking purposes. With a usage scenario, we demonstrate how BiSet supports the exploration of coordinated relationships in text analytics.
Experimental investigation of the coolability of blocked hexagonal bundles
Hózer, Zoltán, E-mail: zoltan.hozer@energia.mta.hu; Nagy, Imre; Kunstár, Mihály; Szabó, Péter; Vér, Nóra; Farkas, Róbert; Trosztel, István; Vimi, András
2017-06-15
Highlights: • Experiments were performed with electrically heated hexagonal fuel bundles. • Coolability of ballooned VVER-440 type bundle was confirmed up to high blockage rate. • Pellet relocation effect causes delay in the cool-down of the bundle. • The bypass line does not prevent the reflood of ballooned fuel rods. - Abstract: The CODEX-COOL experimental series was carried out in order to evaluate the effect of ballooning and pellet relocation in hexagonal bundles on the coolability of fuel rods after a LOCA event. The effects of blockage geometry, coolant flowrate, initial temperature and axial profile were investigated. The experimental results confirmed that a VVER bundle up to 80% blockage rate remains coolable after a LOCA event under design basis conditions. The ballooned section creates some obstacles for the cooling water during reflood of the bundle, but this effect causes only a short delay in the cooling down of the hot fuel rods. The accumulation of fuel pellet debris in the ballooned volume results in a local power peak, which leads to further slowing down of quench front.
Oscillation of carbon molecules inside carbon nanotube bundles
Thamwattana, Ngamta; Cox, Barry J.; Hill, James M.
2009-04-01
In this paper, we investigate the mechanics of a nanoscaled gigahertz oscillator comprising a carbon molecule oscillating within the centre of a uniform concentric ring or bundle of carbon nanotubes. Two kinds of oscillating molecules are considered, which are a carbon nanotube and a C60 fullerene. Using the Lennard-Jones potential and the continuum approach, we obtain a relation between the bundle radius and the radii of the nanotubes forming the bundle, as well as the optimum bundle size which gives rise to the maximum oscillatory frequency for both the nanotube-bundle and the C60-bundle oscillators. While previous studies in this area have been undertaken through molecular dynamics simulations, this paper emphasizes the use of applied mathematical modelling techniques, which provides considerable insight into the underlying mechanisms of the nanoscaled oscillators. The paper presents a synopsis of the major results derived in detail by the present authors (Cox et al 2007 Proc. R. Soc. A 464 691-710 and Cox et al 2007 J. Phys. A: Math. Theor. 40 13197-208).
First-principles study on dielectric function of isolated and bundled carbon nanotubes
Yang, J. Y.; Liu, L. H.; Tan, J. Y.
2015-06-01
The dielectric function fundamentally determines the thermal radiative properties of nanomaterials. In this work, the first-principles method is applied to investigate the finite temperature dielectric function of isolated and bundled single-walled carbon nanotubes in the visible-ultraviolet spectral range without empirical models. The effects of diameter, intertube interactions and temperature on dielectric functions are discussed. The calculated extraordinary dielectric functions of four isolated (5,5), (6,6), (7,7) and (8,8) armchair nanotubes with different diameters are compared to study the diameter effect. It shows that the locations of absorption peaks of dielectric functions consistently shift to lower energy with increasing diameter. To analyze the influence of non-local intertube interactions, the dielectric functions of bundled (6,6) armchair nanotubes with varying intertube distance are calculated within the van der Waals theory. As nanotubes bundle together, the intertube interactions become strong and the absorption peaks enhance. The temperature effect is included into computing dielectric function of isolated (5,0) zigzag nanotubes via first-principles molecular dynamics method. It observes that the dominant absorption peak shifts to lower energy as temperature increases from 0 to 600 K. To interpret the temperature influence, the temperature perturbed density of states is presented.
Adherence to the items in a bundle for the prevention of ventilator-associated pneumonia
Sachetti, Amanda; Rech, Viviane; Dias, Alexandre Simões; Fontana, Caroline; Barbosa, Gilberto da Luz; Schlichting, Dionara
2014-01-01
Objective To assess adherence to a ventilator care bundle in an intensive care unit and to determine the impact of adherence on the rates of ventilatorassociated pneumonia. Methods A total of 198 beds were assessed for 60 days using a checklist that consisted of the following items: bed head elevation to 30 to 45º; position of the humidifier filter; lack of fluid in the ventilator circuit; oral hygiene; cuff pressure; and physical therapy. Next, an educational lecture was delivered, and 235 beds were assessed for the following 60 days. Data were also collected on the incidence of ventilator-acquired pneumonia. Results Adherence to the following ventilator care bundle items increased: bed head elevation from 18.7% to 34.5%; lack of fluid in the ventilator circuit from 55.6% to 72.8%; oral hygiene from 48.5% to 77.8%; and cuff pressure from 29.8% to 51.5%. The incidence of ventilator-associated pneumonia was statistically similar before and after intervention (p=0.389). Conclusion The educational intervention performed in this study increased the adherence to the ventilator care bundle, but the incidence of ventilator-associated pneumonia did not decrease in the small sample that was assessed. PMID:25607263
Femtosecond laser writing of Bragg grating waveguide bundles in bulk glass.
Thiel, Markus; Flachenecker, Günter; Schade, Wolfgang
2015-04-01
Waveguide bundles in bulk glass materials, consisting of several parallel scans of refractive index modifications, have been generated with a low-repetition femtosecond laser. Additionally, Bragg grating (BG) structures for 840 and 1550 nm have been introduced by segmentation of the central scan. A spectral loss in the transmission signal of >36 dB was achieved at 1550 nm with a second-order Bragg grating waveguide (BGW) in fused silica, which corresponds to an intrinsic grating efficiency of >16 dB/cm. This is to our knowledge the strongest BG structure realized in glass with a femtosecond laser. The BGW were proven to be stable up to a temperature of 250°C in fused silica. The diameter of the waveguide bundles can be adapted very easily for a broad range of wavelengths and have been demonstrated for diameters between 1 and 50 μm. The transmission properties of the waveguide bundles are affected minorly by the insertion of BG structures, which opens the ability for adjusting the BGW for a broad range of wavelength in single-mode or multimode optical circuits. BGW have been realized successfully in fused silica, borosilicate glass (BOROFLOAT 33), and AF 32 eco Thin Glass from Schott.
Thermodynamics of adsorption of light alkanes and alkenes in single-walled carbon nanotube bundles
Cruz, Fernando J A L
2016-01-01
The thermodynamics of adsorption of light alkanes and alkenes (CH4, C2H6, C2H4, C3H8, and C3H6) in single-walled carbon nanotube bundles is studied by configurational-bias grand canonical Monte Carlo simulation. The bundles consist of uniform nanotubes with diameters in the range 11.0 < D (A) < 18.1, arranged in the usual close-packed hexagonal lattice. The phase space is systematically analyzed with calculations for adsorption at room temperature and reduced pressure range of 8.7 x 10-9 < (p/p0) < 0.9. The simulation results are interpreted in terms of the molecular nature of the adsorbate and the corresponding solid-fluid interactions. It is shown that confinement in the internal volume of the bundle (interstitial and intratubular) is energetically more favorable than physisorption on the external surface (grooves and exposed surfaces of peripheral tubes), as indicated by the curves of isosteric heat as a function of reduced pressure. However, the zero-loading properties suggest a crossover poin...
A model for the anisotropic response of fibrous soft tissues using six discrete fibre bundles
Flynn, Cormac
2011-06-30
The development of constitutive models of fibrous soft-tissues is a challenging problem. Many consider the tissue to be a collection of fibres with a continuous distribution function representing their orientations. A discrete fibre model is presented consisting of six weighted fibre-bundles. Each bundle is oriented such that it passes through opposing vertices of a regular icosahedron. A novel aspect is the use of simple analytical distribution functions to simulate undulated collagen fibres. This approach yields closed-form analytical expressions for the strain energy of the collagen fibre-bundle that avoids the sometimes costly numerical integration of some statistical distribution functions. The elastin fibres are characterized by a modified neo-Hookean type strain energy function which does not allow for fibre compression. The model accurately simulates biaxial stretching of rabbit-skin (error-of-fit 8.7), uniaxial stretching of pig-skin (error-of-fit 7.6), equibiaxial loading of aortic valve cusp (error-of-fit 0.8), and simple shear of rat septal myocardium (error-of-fit 8.9). It compares favourably with previous soft-tissue models and alternative methods of representing undulated collagen fibres. Predicted collagen fibre stiffnesses range from 8.0thinspaceMPa to 930MPa. Elastin fibre stiffnesses range from 2.0 kPa to 154.4 kPa. © 2011 John Wiley & Sons, Ltd.
Dean, Shannon M; Eickhoff, Jens C; Bakel, Leigh Anne
2015-02-01
Providers nationally have observed a decline in the quality of documentation after implementing electronic health records (EHRs). In this pilot study, we examined the effectiveness of an intervention bundle designed to improve resident progress notes written in an EHR and to establish the reliability of an audit tool used to evaluate notes. The bundle consisted of establishing note-writing guidelines, developing an aligned note template, and educating interns about the guidelines and using the template. Twenty-five progress notes written by pediatric interns before and after this intervention were examined using an audit tool. Reliability of the tool was evaluated using the intraclass correlation coefficient (ICC). The total score of the audit tool was summarized in terms of means and standard deviation. Individual item responses were summarized using percentages and compared between the pre- and postintervention assessment using the Fisher exact test. The ICC for the audit tool was 0.96 (95% confidence interval: 0.91-0.98). A significant improvement in the total note score and in questions related to note clutter was seen. No significant improvement was seen for questions related to copy-paste. The study suggests that an intervention bundle can lead to some improvements in note writing.
Network Consistent Data Association.
Chakraborty, Anirban; Das, Abir; Roy-Chowdhury, Amit K
2016-09-01
Existing data association techniques mostly focus on matching pairs of data-point sets and then repeating this process along space-time to achieve long term correspondences. However, in many problems such as person re-identification, a set of data-points may be observed at multiple spatio-temporal locations and/or by multiple agents in a network and simply combining the local pairwise association results between sets of data-points often leads to inconsistencies over the global space-time horizons. In this paper, we propose a Novel Network Consistent Data Association (NCDA) framework formulated as an optimization problem that not only maintains consistency in association results across the network, but also improves the pairwise data association accuracies. The proposed NCDA can be solved as a binary integer program leading to a globally optimal solution and is capable of handling the challenging data-association scenario where the number of data-points varies across different sets of instances in the network. We also present an online implementation of NCDA method that can dynamically associate new observations to already observed data-points in an iterative fashion, while maintaining network consistency. We have tested both the batch and the online NCDA in two application areas-person re-identification and spatio-temporal cell tracking and observed consistent and highly accurate data association results in all the cases.
Technology Maturity is Technology Superiority
2008-09-09
Dominant Air Power: Design For Tomorrow…Deliver Today 2 TECHNOLOGY MATURITY CONFERENCE • ONE DEFINITION OF MATURITY – GOOD JUDGEMENT COMES FROM...EXPERIENCE—EXPERIENCE COMES FROM BAD JUDGEMENT Dominant Air Power: Design For Tomorrow…Deliver Today 3 TECHNOLOGY MATURITY CONFERENCE • THIS WILL BE A...2008 TECHNOLOGY MATURITY CONFERENCE “ TECHNOLOGY MATURITY IS TECHNOLOGY SUPERIORITY” Aeronautical Systems Center Dr. Tom Christian ASC/EN, WPAFB OH
Mechanics of bacteriophage maturation
Roos, Wouter H.; Gertsman, Ilya; May, Eric R.; Brooks III, Charles L.; Johnson, John E.; Wuite, Gijs J. L.
2012-01-01
Capsid maturation with large-scale subunit reorganization occurs in virtually all viruses that use a motor to package nucleic acid into preformed particles. A variety of ensemble studies indicate that the particles gain greater stability during this process, however, it is unknown which material
Mathes, Eugene W.; Deuger, Donna J.
Jealousy may be perceived as either good or bad depending upon the moral maturity of the individual. To investigate this conclusion, a study was conducted testing two hypothesis: a positive relationship exists between conventional moral reasoning (reference to norms and laws) and the endorsement and level of jealousy; and a negative relationship…
Combustor having mixing tube bundle with baffle arrangement for directing fuel
Hughes, Michael John; McConnaughhay, Johnie Franklin
2016-08-23
A combustor includes a tube bundle that extends radially across at least a portion of the combustor. The tube bundle includes an upstream surface axially separated from a downstream surface, and a plurality of tubes extend from the upstream surface through the downstream surface to provide fluid communication through the tube bundle. A barrier extends radially inside the tube bundle between the upstream and downstream surfaces, and a baffle extends axially inside the tube bundle between the upstream surface and the barrier.
Thomsen, Christa; Nielsen, Anne Ellerup
2006-01-01
of a case study showing that companies use different and not necessarily consistent strategies for reporting on CSR. Finally, the implications for managerial practice are discussed. The chapter concludes by highlighting the value and awareness of the discourse and the discourse types adopted......This chapter first outlines theory and literature on CSR and Stakeholder Relations focusing on the different perspectives and the contextual and dynamic character of the CSR concept. CSR reporting challenges are discussed and a model of analysis is proposed. Next, our paper presents the results...... in the reporting material. By implementing consistent discourse strategies that interact according to a well-defined pattern or order, it is possible to communicate a strong social commitment on the one hand, and to take into consideration the expectations of the shareholders and the other stakeholders...
A Magnetic Consistency Relation
Jain, Rajeev Kumar
2012-01-01
If cosmic magnetic fields are indeed produced during inflation, they are likely to be correlated with the scalar metric perturbations that are responsible for the Cosmic Microwave Background anisotropies and Large Scale Structure. Within an archetypical model of inflationary magnetogenesis, we show that there exists a new simple consistency relation for the non-Gaussian cross correlation function of the scalar metric perturbation with two powers of the magnetic field in the squeezed limit where the momentum of the metric perturbation vanishes. We emphasize that such a consistency relation turns out to be extremely useful to test some recent calculations in the literature. Apart from primordial non-Gaussianity induced by the curvature perturbations, such a cross correlation might provide a new observational probe of inflation and can in principle reveal the primordial nature of cosmic magnetic fields.
Consistency in Distributed Systems
Kemme, Bettina; Ramalingam, Ganesan; Schiper, André; Shapiro, Marc; Vaswani, Kapil
2013-01-01
International audience; In distributed systems, there exists a fundamental trade-off between data consistency, availability, and the ability to tolerate failures. This trade-off has significant implications on the design of the entire distributed computing infrastructure such as storage systems, compilers and runtimes, application development frameworks and programming languages. Unfortunately, it also has significant, and poorly understood, implications for the designers and developers of en...
Geometrically Consistent Mesh Modification
Bonito, A.
2010-01-01
A new paradigm of adaptivity is to execute refinement, coarsening, and smoothing of meshes on manifolds with incomplete information about their geometry and yet preserve position and curvature accuracy. We refer to this collectively as geometrically consistent (GC) mesh modification. We discuss the concept of discrete GC, show the failure of naive approaches, and propose and analyze a simple algorithm that is GC and accuracy preserving. © 2010 Society for Industrial and Applied Mathematics.
Consistent wind Facilitates Vection
Masaki Ogawa
2011-10-01
Full Text Available We examined whether a consistent haptic cue suggesting forward self-motion facilitated vection. We used a fan with no blades (Dyson, AM01 providing a wind of constant strength and direction (wind speed was 6.37 m/s to the subjects' faces with the visual stimuli visible through the fan. We used an optic flow of expansion or contraction created by positioning 16,000 dots at random inside a simulated cube (length 20 m, and moving the observer's viewpoint to simulate forward or backward self-motion of 16 m/s. we tested three conditions for fan operation, which were normal operation, normal operation with the fan reversed (ie, no wind, and no operation (no wind and no sound. Vection was facilitated by the wind (shorter latency, longer duration and larger magnitude values with the expansion stimuli. The fan noise did not facilitate vection. The wind neither facilitated nor inhibited vection with the contraction stimuli, perhaps because a headwind is not consistent with backward self-motion. We speculate that the consistency between multi modalities is a key factor in facilitating vection.
Shi, Dongliang; Zhou, Jingbin; Yapici, Can; Linde-Rosen, Monica; Smolinski, Patrick; Fu, Freddie H
2015-03-01
To investigate the effect of graft fixation sequence in double-bundle anterior cruciate ligament (ACL) reconstruction on knee biomechanics. Twelve mature porcine knees underwent double-bundle ACL reconstruction with a randomized fixation order of the two graft bundles. The knees were subjected to external loadings of (1) an 89 N anterior tibial load at 30°, 60° and 90° of knee flexion and (2) 4 N-m internal and external tibial torques at 30° and 60° of knee flexion for ACL intact, deficient and reconstructed states. Knee kinematics and in situ graft forces were measured under the applied loads. The anterior tibial translation of the two reconstructions was not different from each other but was significantly different from the intact ACL. There was no difference in internal and external rotations between the intact knees and the reconstructions. At lower flexion angles, the graft that was fixed last (whether anteromedial or posterolateral) tended to carry significantly higher in situ load under anterior tibial loading and tibial torques. While a difference in knee kinematics may not be observable with different graft fixation sequences, fixation sequence can alter the in situ forces that the grafts bear under knee loading.
Histones bundle F-actin filaments and affect actin structure.
Blotnick, Edna; Sol, Asaf; Muhlrad, Andras
2017-01-01
Histones are small polycationic proteins complexed with DNA located in the cell nucleus. Upon apoptosis they are secreted from the cells and react with extracellular polyanionic compounds. Actin which is a polyanionic protein, is also secreted from necrotic cells and interacts with histones. We showed that both histone mixture (histone type III) and the recombinant H2A histone bundles F-actin, increases the viscosity of the F-actin containing solution and polymerizes G-actin. The histone-actin bundles are relatively insensitive to increase of ionic strength, unlike other polycation, histatin, lysozyme, spermine and LL-37 induced F-actin bundles. The histone-actin bundles dissociate completely only in the presence of 300-400 mM NaCl. DNA, which competes with F-actin for histones, disassembles histone induced actin bundles. DNase1, which depolymerizes F- to G-actin, actively unbundles the H2A histone induced but slightly affects the histone mixture induced actin bundles. Cofilin decreases the amount of F-actin sedimented by low speed centrifugation, increases light scattering and viscosity of F-actin-histone mixture containing solutions and forms star like superstructures by copolymerizing G-actin with H2A histone. The results indicate that histones are tightly attached to F-actin by strong electrostatic and hydrophobic forces. Since both histones and F-actin are present in the sputum of patients with cystic fibrosis, therefore, the formation of the stable histone-actin bundles can contribute to the pathology of this disease by increasing the viscosity of the sputum. The actin-histone interaction in the nucleus might affect gene expression.
Bes, T. [Szczecin Univ. of Technology (Poland). Dept. of Heat Engineering
2006-07-01
The system consisting of a biomass-furnace and a Stirling engine as an electricity generator is analysed from thermal point of view. The analysis is focused on a selected element of such a system i.e. a block with a bundle of tubes located in the furnace in the way of combustion gases. The working fluid circulates between the cylinders of the Stirling engine and inside the tube bundle, in which the gas flow is arranged as a co-directed cross-flow. For any given number of tubes in the bundle other ways of switching between tubes are also analysed. The tube bundles have also been examined for various proportions of mass flows in the apparatus. Moreover a whole spectrum of NTU is taken into account. Due to low combustion heat of biomass the temperature of combustion gas is relatively low (below {proportional_to}800oC). This is not sufficient to achieve adequate thermal efficiency, which is significantly below the efficiency of a conventional power plant. Therefore by improving the conditions for heat transfer within the tube bundle it is possible to increase the gas temperature as much as possible and also efficiency of the system. Thus, proper operation of the bundle is the critical element for the examined device. (orig.)
Heat transfer on HLM cooled wire-spaced fuel pin bundle simulator in the NACIE-UP facility
Di Piazza, Ivan, E-mail: ivan.dipiazza@enea.it [Italian National Agency for New Technologies, Energy and Sustainable Economic Development, C.R. ENEA Brasimone, Camugnano (Italy); Angelucci, Morena; Marinari, Ranieri [University of Pisa, Dipartimento di Ingegneria Civile e Industriale, Pisa (Italy); Tarantino, Mariano [Italian National Agency for New Technologies, Energy and Sustainable Economic Development, C.R. ENEA Brasimone, Camugnano (Italy); Forgione, Nicola [University of Pisa, Dipartimento di Ingegneria Civile e Industriale, Pisa (Italy)
2016-04-15
Highlights: • Experiments with a wire-wrapped 19-pin fuel bundle cooled by LBE. • Wall and bulk temperature measurements at three axial positions. • Heat transfer and error analysis in the range of low mass flow rates and Péclet number. • Comparison of local and section-averaged Nusselt number with correlations. - Abstract: The NACIE-UP experimental facility at the ENEA Brasimone Research Centre (Italy) allowed to evaluate the heat transfer coefficient of a wire-spaced fuel bundle cooled by lead-bismuth eutectic (LBE). Lead or lead-bismuth eutectic are very attractive as coolants for the GEN-IV fast reactors due to the good thermo-physical properties and the capability to fulfil the GEN-IV goals. Nevertheless, few experimental data on heat transfer with heavy liquid metals (HLM) are available in literature. Furthermore, just a few data can be identified on the specific topic of wire-spaced fuel bundle cooled by HLM. Additional analysis on thermo-fluid dynamic behaviour of the HLM inside the subchannels of a rod bundle is necessary to support the design and safety assessment of GEN. IV/ADS reactors. In this context, a wire-spaced 19-pin fuel bundle was installed inside the NACIE-UP facility. The pin bundle is equipped with 67 thermocouples to monitor temperatures and analyse the heat transfer behaviour in different sub-channels and axial positions. The experimental campaign was part of the SEARCH FP7 EU project to support the development of the MYRRHA irradiation facility (SCK-CEN). Natural and mixed circulation flow regimes were investigated, with subchannel Reynolds number in the range Re = 1000–10,000 and heat flux in the range q″ = 50–500 kW/m{sup 2}. Local Nusselt numbers were calculated for five sub-channels in different ranks at three axial positions. Section-averaged Nusselt number was also defined and calculated. Local Nusselt data showed good consistency with some of the correlation existing in literature for heat transfer in liquid metals
Infanticide and moral consistency.
McMahan, Jeff
2013-05-01
The aim of this essay is to show that there are no easy options for those who are disturbed by the suggestion that infanticide may on occasion be morally permissible. The belief that infanticide is always wrong is doubtfully compatible with a range of widely shared moral beliefs that underlie various commonly accepted practices. Any set of beliefs about the morality of abortion, infanticide and the killing of animals that is internally consistent and even minimally credible will therefore unavoidably contain some beliefs that are counterintuitive.
Serfon, Cedric; The ATLAS collaboration
2016-01-01
One of the biggest challenge with Large scale data management system is to ensure the consistency between the global file catalog and what is physically on all storage elements. To tackle this issue, the Rucio software which is used by the ATLAS Distributed Data Management system has been extended to automatically handle lost or unregistered files (aka Dark Data). This system automatically detects these inconsistencies and take actions like recovery or deletion of unneeded files in a central manner. In this talk, we will present this system, explain the internals and give some results.
Börlin, Niclas; Grussenmeyer, Pierre
2016-06-01
The aim of this paper is to investigate whether the Matlab-based Damped Bundle Adjustment Toolbox (DBAT) can be used to provide independent verification of the BA computation of two popular software—PhotoModeler (PM) and PhotoScan (PS). For frame camera data sets with lens distortion, DBAT is able to reprocess and replicate subsets of PM results with high accuracy. For lens-distortion-free data sets, DBAT can furthermore provide comparative results between PM and PS. Data sets for the discussed projects are available from the authors. The use of an external verification tool such as DBAT will enable users to get an independent verification of the computations of their software. In addition, DBAT can provide computation of quality parameters such as estimated standard deviations, correlation between parameters, etc., something that should be part of best practice for any photogrammetric software. Finally, as the code is free and open-source, users can add computations of their own.
Mecobalamin promotes mouse sperm maturation.
Oshio, S; Ozaki, S; Ohkawa, I; Tajima, T; Kaneko, S; Mohri, H
1989-01-01
The effect of Mecobalamin (alpha-(5,6-dimethyl benzimidazolyl)-Co-methyl-cobamide: Me-B 12) on sperm production in the oligozoospermic mice experimentally induced by the treatment with adriamycin (0.3 mg/kg, three times a week for 5 weeks) was evaluated quantitatively by means of equilibrium sedimentation in Percoll. After centrifugation, the distribution profile of the sperm showed two peaks, i.e. the first peak near the bottom consisting of mature sperm with good motility and the second peak containing immature and/or immotile sperm. By oral administration of Me B 12 (1.0 mg/kg/day) to the oligozoospermic mice for 10 weeks, the sperm count, sperm motility, motile sperm count, diameter of seminiferous tubules and the percentage of good motile sperm with higher apparent density were increased as compared with those of the control. These results suggest that Me-B 12 enhanced the testicular function, resulting in an increased output of mature sperm.
When is holography consistent?
McInnes, Brett, E-mail: matmcinn@nus.edu.sg [National University of Singapore (Singapore); Ong, Yen Chin, E-mail: yenchin.ong@nordita.org [Nordita, KTH Royal Institute of Technology and Stockholm University, Roslagstullsbacken 23, SE-106 91 Stockholm (Sweden)
2015-09-15
Holographic duality relates two radically different kinds of theory: one with gravity, one without. The very existence of such an equivalence imposes strong consistency conditions which are, in the nature of the case, hard to satisfy. Recently a particularly deep condition of this kind, relating the minimum of a probe brane action to a gravitational bulk action (in a Euclidean formulation), has been recognized; and the question arises as to the circumstances under which it, and its Lorentzian counterpart, is satisfied. We discuss the fact that there are physically interesting situations in which one or both versions might, in principle, not be satisfied. These arise in two distinct circumstances: first, when the bulk is not an Einstein manifold and, second, in the presence of angular momentum. Focusing on the application of holography to the quark–gluon plasma (of the various forms arising in the early Universe and in heavy-ion collisions), we find that these potential violations never actually occur. This suggests that the consistency condition is a “law of physics” expressing a particular aspect of holography.
Sandra Umeda Sasaki
2008-01-01
Full Text Available INTRODUCTION: Anterior cruciate ligament ruptures are frequent, especially in sports. Surgical reconstruction with autologous grafts is widely employed in the international literature. Controversies remain with respect to technique variations as continuous research for improvement takes place. One of these variations is the anatomical double bundle technique, which is performed instead of the conventional single bundle technique. More recently, there has been a tendency towards positioning the two bundles through double bone tunnels in the femur and tibia (anatomical reconstruction. OBJECTIVES: To compare, through biomechanical tests, the practice of anatomical double bundle anterior cruciate ligament reconstruction with a patellar graft to conventional single bundle reconstruction with the same amount of patellar graft in a paired experimental cadaver study. METHODS: Nine pairs of male cadaver knees ranging in age from 44 to 63 years were randomized into two groups: group A (single bundle and group B (anatomical reconstruction. Each knee was biomechanically tested under three conditions: intact anterior cruciate ligament, reconstructed anterior cruciate ligament, and injured anterior cruciate ligament. Maximum anterior dislocation, rigidity, and passive internal tibia rotation were recorded with knees submitted to a 100 N horizontal anterior dislocation force applied to the tibia with the knees at 30, 60 and 90 degrees of flexion. RESULTS: There were no differences between the two techniques for any of the measurements by ANOVA tests. CONCLUSION: The technique of anatomical double bundle reconstruction of the anterior cruciate ligament with bone-patellar tendon-bone graft has a similar biomechanical behavior with regard to anterior tibial dislocation, rigidity, and passive internal tibial rotation.
Improvements to Wire Bundle Thermal Modeling for Ampacity Determination
Rickman, Steve L.; Iannello, Christopher J.; Shariff, Khadijah
2017-01-01
Determining current carrying capacity (ampacity) of wire bundles in aerospace vehicles is critical not only to safety but also to efficient design. Published standards provide guidance on determining wire bundle ampacity but offer little flexibility for configurations where wire bundles of mixed gauges and currents are employed with varying external insulation jacket surface properties. Thermal modeling has been employed in an attempt to develop techniques to assist in ampacity determination for these complex configurations. Previous developments allowed analysis of wire bundle configurations but was constrained to configurations comprised of less than 50 elements. Additionally, for vacuum analyses, configurations with very low emittance external jackets suffered from numerical instability in the solution. A new thermal modeler is presented allowing for larger configurations and is not constrained for low bundle infrared emissivity calculations. Formulation of key internal radiation and interface conductance parameters is discussed including the effects of temperature and air pressure on wire to wire thermal conductance. Test cases comparing model-predicted ampacity and that calculated from standards documents are presented.
Variable recruitment in bundles of miniature pneumatic artificial muscles.
DeLaHunt, Sylvie A; Pillsbury, Thomas E; Wereley, Norman M
2016-09-13
The natural compliance and force generation properties of pneumatic artificial muscles (PAMs) allow them to operate like human muscles in anthropomorphic robotic manipulators. Traditionally, manipulators use a single PAM or multiple PAMs actuated in unison in place of a human muscle. However, these standard manipulators can experience significant efficiency losses when operated outside their target performance ranges at low actuation pressures. This study considers the application of a variable recruitment control strategy to a parallel bundle of miniature PAMs as an attempt to mimic the selective recruitment of motor units in a human muscle. Bundles of miniature PAMs are experimentally characterized, their actuation behavior is modeled, and the efficiency gains and losses associated with the application of a variable recruitment control strategy are assessed. This bio-inspired control strategy allows muscle bundles to operate the fewest miniature PAMs necessary to achieve a desired performance objective, improving the muscle bundle's operating efficiency over larger ranges of force generation and displacement. The study also highlights the need for improved PAM fabrication techniques to facilitate the production of identical miniature PAMs for inclusion in muscle bundles.
Thermal hydraulics of rod bundles: The effect of eccentricity
Chauhan, Amit K., E-mail: amit_fmlab@yahoo.co.in [Fluid Mechanics Laboratory, Department of Applied Mechanics, Indian Institute of Technology Madras, Chennai 600036 (India); Prasad, B.V.S.S.S., E-mail: prasad@iitm.ac.in [Thermal Turbomachines Laboratory, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai 600036 (India); Patnaik, B.S.V., E-mail: bsvp@iitm.ac.in [Fluid Mechanics Laboratory, Department of Applied Mechanics, Indian Institute of Technology Madras, Chennai 600036 (India)
2013-10-15
Highlights: • Present CFD investigation explores, whole bundle eccentricity for the first time. • Fluid flow and thermal characteristics in various subchannels are analyzed. • Mass flux distribution is particularly analyzed to study eccentricity effect. • Higher eccentricity resulted in a shoot up in rod surface temperature distribution. • Both tangential and radial flow in rod bundles has resulted due to eccentricity. -- Abstract: The effect of eccentricity on the fluid flow and heat transfer through a 19-rod bundle is numerically carried out. When the whole bundle shifts downwards with respect to the outer (pressure) tube, flow redistribution happens. This in turn is responsible for changes in mass flux, pressure and differential flow development in various subchannels. The heat flux imposed on the surface of the fuel rods and the mass flux through the subchannels determines the coolant outlet temperatures. The simulations are performed for a coolant flow Reynolds number of 4 × 10{sup 5}. For an eccentricity value of 0.7, the mass flux in the bottom most subchannel (l) was found to decrease by 10%, while the surface temperature of the fuel rod in the vicinity of this subchannel increased by 250% at the outlet section. Parameters of engineering interest including skin friction coefficient, Nusselt number, etc., have been systematically explored to study the effect of eccentricity on the rod bundle.
Dynamic response of fiber bundle under transverse impact.
Lu, Wei-Yang; Song, Bo
2010-03-01
There has been a very high demand in developing efficient soft body armors to protect the military and law enforcement personnel from ballistic or explosive attack. As a basic component in the soft body armor, fibers or fiber bundles play a key role in the performance against ballistic impact. In order to study the ballistic-resistant mechanism of the soft body armor, it is desirable to understand the dynamic response of the fiber bundle under transverse impact. Transverse wave speed is one important parameter because a faster transverse wave speed can make the impact energy dissipate more quickly. In this study, we employed split Hopkinson pressure bar (SHPB) to generate constant high-speed impact on a Kevlar fiber bundle in the transverse direction. The deformation of the fiber bundle was photographed with high-speed digital cameras. The transverse wave speeds were experimentally measured at various transverse impact velocities. The experimental results can also be used to quantitatively verify the current analytical models or to develop new models to describe the dynamic response of fiber bundle under transverse impact.
Pressure Loss across Tube Bundles in Two-phase Flow
Sim, Woo Gun; Banzragch, Dagdan [Hannam Univ., Daejon (Korea, Republic of)
2016-03-15
An analytical model was developed by Sim to estimate the two-phase damping ratio for upward two-phase flow perpendicular to horizontal tube bundles. The parameters of two-phase flow, such as void fraction and pressure loss evaluated in the model, were calculated based on existing experimental formulations. However, it is necessary to implement a few improvements in the formulations for the case of tube bundles. For the purpose of the improved formulation, we need more information about the two-phase parameters, which can be found through experimental test. An experiment is performed with a typical normal square array of cylinders subjected to the two-phase flow of air-water in the tube bundles, to calculate the two-phase Euler number and the two-phase friction multiplier. The pitch-to-diameter ratio is 1.35 and the diameter of cylinder is 18mm. Pressure loss along the flow direction in the tube bundles is measured with a pressure transducer and data acquisition system to calculate the two-phase Euler number and the two-phase friction multiplier. The void fraction model by Feenstra et al. is used to estimate the void fraction of the two-phase flow in tube bundles. The experimental results of the two phase friction multiplier and two-phase Euler number for homogeneous and non-homogeneous two-phase flows are compared and evaluated against the analytical results given by Sim's model.
L. Alberts
1988-03-01
Full Text Available The concept is developed that modern technology, because of its relationship with pure science, can never really become mature, but will always grow as the pool of scientific knowledge grows. Parameters indicating to some extent the degree of technological prowess in a society are compared for a spectrum of countries. It is clear that in spite of some internationally outstanding successes. South Africa must be regarded on average as a developing society.
Andrew Forge
2017-03-01
Full Text Available Behavioural anomalies suggesting an inner ear disorder were observed in a colony of transgenic mice. Affected animals were profoundly deaf. Severe hair bundle defects were identified in all outer and inner hair cells (OHC, IHC in the cochlea and in hair cells of vestibular macular organs, but hair cells in cristae were essentially unaffected. Evidence suggested the disorder was likely due to gene disruption by a randomly inserted transgene construct. Whole-genome sequencing identified interruption of the SorCS2 (Sortilin-related VPS-10 domain containing protein locus. Real-time-qPCR demonstrated disrupted expression of SorCS2 RNA in cochlear tissue from affected mice and this was confirmed by SorCS2 immuno-labelling. In all affected hair cells, stereocilia were shorter than normal, but abnormalities of bundle morphology and organisation differed between hair cell types. Bundles on OHC were grossly misshapen with significantly fewer stereocilia than normal. However, stereocilia were organised in rows of increasing height. Bundles on IHC contained significantly more stereocilia than normal with some longer stereocilia towards the centre, or with minimal height differentials. In early postnatal mice, kinocilia (primary cilia of IHC and of OHC were initially located towards the lateral edge of the hair cell surface but often became surrounded by stereocilia as bundle shape and apical surface contour changed. In macular organs the kinocilium was positioned in the centre of the cell surface throughout maturation. There was disruption of the signalling pathway controlling intrinsic hair cell apical asymmetry. LGN and Gαi3 were largely absent, and atypical Protein Kinase C (aPKC lost its asymmetric distribution. The results suggest that SorCS2 plays a role upstream of the intrinsic polarity pathway and that there are differences between hair cell types in the deployment of the machinery that generates a precisely organised hair bundle.
Taylor, Ruth R.; Lovett, Michael; Jagger, Daniel J.
2017-01-01
Behavioural anomalies suggesting an inner ear disorder were observed in a colony of transgenic mice. Affected animals were profoundly deaf. Severe hair bundle defects were identified in all outer and inner hair cells (OHC, IHC) in the cochlea and in hair cells of vestibular macular organs, but hair cells in cristae were essentially unaffected. Evidence suggested the disorder was likely due to gene disruption by a randomly inserted transgene construct. Whole-genome sequencing identified interruption of the SorCS2 (Sortilin-related VPS-10 domain containing protein) locus. Real-time-qPCR demonstrated disrupted expression of SorCS2 RNA in cochlear tissue from affected mice and this was confirmed by SorCS2 immuno-labelling. In all affected hair cells, stereocilia were shorter than normal, but abnormalities of bundle morphology and organisation differed between hair cell types. Bundles on OHC were grossly misshapen with significantly fewer stereocilia than normal. However, stereocilia were organised in rows of increasing height. Bundles on IHC contained significantly more stereocilia than normal with some longer stereocilia towards the centre, or with minimal height differentials. In early postnatal mice, kinocilia (primary cilia) of IHC and of OHC were initially located towards the lateral edge of the hair cell surface but often became surrounded by stereocilia as bundle shape and apical surface contour changed. In macular organs the kinocilium was positioned in the centre of the cell surface throughout maturation. There was disruption of the signalling pathway controlling intrinsic hair cell apical asymmetry. LGN and Gαi3 were largely absent, and atypical Protein Kinase C (aPKC) lost its asymmetric distribution. The results suggest that SorCS2 plays a role upstream of the intrinsic polarity pathway and that there are differences between hair cell types in the deployment of the machinery that generates a precisely organised hair bundle. PMID:28346477
One-dimensional transport in bundles of single-walled carbon nanotubes
David H. Cobden; Nygard, Jesper; Bockrath, Marc; McEuen, Paul L.
1999-01-01
We report measurements of the temperature and gate voltage dependence for individual bundles (ropes) of single-walled nanotubes. When the conductance is less than about e^2/h at room temperature, it is found to decrease as an approximate power law of temperature down to the region where Coulomb blockade sets in. The power-law exponents are consistent with those expected for electron tunneling into a Luttinger liquid. When the conductance is greater than e^2/h at room temperature, it changes m...
Confocal microscopy using variable-focal-length microlenses and an optical fiber bundle
Yang, Lisong; Mac Raighne, Aaron; McCabe, Eithne M.; Dunbar, L. Andrea; Scharf, Toralf
2008-01-01
The use of variable-focal-length (VFL) microlenses can provide a way to axially scan the foci across a sample by electronic control. We demonstrate an approach to coupling VFL microlenses individually to a fiber bundle as a way to create a high-throughput aperture array with a controllable aperture pattern. It would potentially be applied in real-time confocal imaging in vivo for biological specimens. The VFL microlenses that we used consist of a liquid-crystal film sandwiched between a pair ...
McCarthy, Cormac
2013-01-01
Aim: To determine the efficacy and usefulness of a chronic obstructive pulmonary disease (COPD) care bundle designed for the initial management of acute exacerbations of COPD and to assess whether it improves quality of care and provides better outcomes. Introduction: The level of care provided in the emergency department (ED) for COPD exacerbations varies greatly, and there is a need for a more systematic, consistent, evidence-based quality improvement approach to improve outcomes and costs. Methods: A prospective before and after study was carried out in a university teaching hospital. Fifty consecutive patients were identified in the ED with COPD exacerbations and their management was reviewed. Following the education of ED staff and the implementation of a COPD care bundle, the outcome for 51 consecutive patients was analyzed. This COPD care bundle consisted of ten elements considered essential to the management of COPD exacerbations and was scored 0–10 according to the number of items on the checklist implemented correctly. Results: Following implementation, the mean bundle score out of 10 improved from 4.6 to 7 (P,0.001). There was a significant decrease in the unnecessary use of intravenous corticosteroids from 60% to 32% (P=0.003) and also a marked improvement in the use of oxygen therapy, with appropriate treatment increasing from 76% to 96% (P=0.003). Prophylaxis for venous thromboembolism also improved from 54% to 73% (P=0.054). The 30-day readmission rate did not significantly improve. Conclusion: The use of a bundle improves the delivery of care for COPD exacerbations in the ED. There is more appropriate use of therapeutic interventions, especially oxygen therapy and intravenous corticosteroids.
Consistent quantum measurements
Griffiths, Robert B.
2015-11-01
In response to recent criticisms by Okon and Sudarsky, various aspects of the consistent histories (CH) resolution of the quantum measurement problem(s) are discussed using a simple Stern-Gerlach device, and compared with the alternative approaches to the measurement problem provided by spontaneous localization (GRW), Bohmian mechanics, many worlds, and standard (textbook) quantum mechanics. Among these CH is unique in solving the second measurement problem: inferring from the measurement outcome a property of the measured system at a time before the measurement took place, as is done routinely by experimental physicists. The main respect in which CH differs from other quantum interpretations is in allowing multiple stochastic descriptions of a given measurement situation, from which one (or more) can be selected on the basis of its utility. This requires abandoning a principle (termed unicity), central to classical physics, that at any instant of time there is only a single correct description of the world.
Kwon, Mi Jung; Kim, Hye Jeong; Park, Bumjung; Cho, Seong Jin; Shin, Hyung Sik; Park, Hye-Rim; Min, Soo Kee; Seo, Jinwon; Min, Kyueng-Whan; Nam, Eun Sook
2016-09-01
Spindle cell myoepithelioma with extensive lipomatous metaplasia and thick collagen bundles has not yet been described, and there are no published reports on its cytological appearance in fine-needle aspiration (FNA). A 49-year-old man presented with a painless mass in the right submandibular area that had been gradually enlarging for a period of 5 years. The cytologic smears showed fascicles of cohesive spindle cells as well as individual bland cells with bipolar naked nuclei in a fibrillary background. Brightly eosinophilic bundles were intermingled with spindle cells and fat-like vacuoles. The FNA results were suggestive of neurogenic tumor. Patient underwent submandibular gland resection. Grossly, the cut surface showed a well-encapsulated, yellowish-white, soft, elastic mass, measuring 2.8 × 1.9 × 1.5 cm. The tumor consisted of uniform bland spindle cells arranged in short fascicles admixed with adipocyte-like cells and transversing thick collagen bundles, which demonstrated immunoreactivity for myoepithelial markers and ultrastructural features characteristic of myoepithelial cells, suggesting the presence of lipomatous metaplasia. The FNA cytology of spindle cell myoepithelioma with extensive lipometaplasia mimicked that of neurogenic tumor or lipomatous mesenchymal tumor. This case represents the first description of submandibular gland myoepithelioma with lipometaplasia, which is characterized by the coexistence of spindle cells, collagen bundles, and fat-like vacuoles in a fibrillary background. Diagn. Cytopathol. 2016;44:764-769. © 2016 Wiley Periodicals, Inc.
Shi, Wei-Xian; Larson, Ronald G
2005-12-01
RecA and its complexes with double-stranded DNA (dsDNA) and single-stranded DNA (ssDNA) are responsible for homologous recombination and DNA repair. In this study, we have observed, by atomic force microscopy (AFM), two-filament left-handed superhelices of RecA-dsDNA filaments that further interwind into four- or six-filament bundles, in addition to previously reported left-handed bundles of three or six filaments. Also revealed are four-filament bundles formed by further interwinding of two intrafilament superhelices of individual filaments. Pitches of superhelices of RecA-DNA filaments are similar to each other regardless the number of component filaments, and those formed on Phix174 RFII dsDNA and pNEB206A dsDNA are measured as 339.3 +/- 6.2 nm (690 counts of pitch/2) and 321.6 +/- 11.7 nm (101 counts of pitch/2), respectively, consistent with earlier measurements made by electron microscopy with a much smaller sample size. The study of these structures provides insight into the self-interactions of RecA and RecA-like proteins, which are present in all living cells, and into the general phenomenon of bundling, which is relevant to both biological and nonbiological filaments.
Jennifer Anne LaRosa
2012-01-01
Full Text Available Introduction. Diagnostic and therapeutic guidelines, organized as sepsis bundles, have been shown to improve mortality, but timely and consistent implementation of these can be challenging. Our study examined the use of a screening tool and an early alert system to improve bundle compliance and mortality. Methods. A screening tool was used to identify patients with severe sepsis or septic shock and an overhead alert system known as Code SMART (Sepsis Management Alert Response Team was activated at the physician’s discretion. Data was collected for 6 months and compliance with bundle completion and mortality were compared between the Code SMART and non-Code SMART groups. Results. Fifty eight patients were enrolled −34 Code SMART and 24 non-Code SMART. The Code SMART group achieved greater compliance with timely antibiotic administration (P<0.001, lactate draw (P<0.001, and steroid use (P=0.02. Raw survival and survival adjusted for age, leucopenia, and severity of illness scores, were greater in the Code SMART group (P<0.05, P=0.03, and P=0.01. Conclusions. A screening tool and an alert system can improve compliance with sepsis bundle elements and improve survival from severe sepsis and septic shock.
Ibupoto, Z.H., E-mail: zafar.hussin.ibupoto@liu.se [Department of Science and Technology, Linköping University, Campus Norrköping, SE-60174 Norrköping (Sweden); Khun, K. [Department of Science and Technology, Linköping University, Campus Norrköping, SE-60174 Norrköping (Sweden); Liu, X. [Department of Physics, Chemistry, and Biology (IFM), Linköping University, 58183 Linköping Sweden (Sweden); Willander, M. [Department of Science and Technology, Linköping University, Campus Norrköping, SE-60174 Norrköping (Sweden)
2013-10-15
In this study, we have successfully synthesised CuO bundle of nanowires using simple, cheap and low temperature hydrothermal growth method. The growth parameters such as precursor concentration and time for duration of growth were optimised. The field emission scanning electron microscopy (FESEM) has demonstrated that the CuO bundles of nanowires are highly dense, uniform and perpendicularly oriented to the substrate. The high resolution transmission electron microscopy (HRTEM) has demonstrated that the CuO nanostructures consist of bundle of nanowires and their growth pattern is along the [010] direction. The X-ray diffraction (XRD) technique described that CuO bundle of nanowires possess the monoclinic crystal phase. The surface and chemical composition analyses were carried out with X-ray photoelectron spectroscopy (XPS) technique and the obtained results suggested the pure crystal state of CuO nanostructures. In addition, the CuO nanowires were used for the cholesterol sensing application by immobilising the cholesterol oxidase through electrostatic attraction. The infrared reflection absorption spectroscopy study has also revealed that CuO nanostructures are consisting of only Cu-O bonding and has also shown the possible interaction of cholesterol oxidase with the sharp edge surface of CuO bundle of nanowires. The proposed cholesterol sensor has demonstrated the wide range of detection of cholesterol with good sensitivity of 33.88 ± 0.96 mV/decade. Moreover, the CuO bundle of nanowires based sensor electrode has revealed good repeatability, reproducibility, stability, selectivity and a fast response time of less than 10 s. The cholesterol sensor based on the immobilised cholesterol oxidase has good potential applicability for the determination of cholesterol from the human serum and other biological samples. - Highlights: • This study describes the synthesis of bundle of CuO nanowires by hydrothermal method. • CuO nanostructures exhibit good alignment and
Failure of a MEA reclaimer tube bundle due to corrosion
Shaban, H.; Abdo, M.S.E.; Lal, D.P.
1988-08-01
The removal of sulphur compounds from natural gas used in ammonia production is carried out by scrubbing with monoethanol amine (MEA). To avoid build up of corrosion and degradation products, a portion of the circulating MEA solution is passed through a reclaimer. This is essentially a kettle-type reboiler with a tube bundle made of 316L stainless steel. Occasional failures of the tube bundle due to pitting corrosion have been reported. It is suggested that the excessive pitting corrosion observed on the upper rows of the tube bundle could be partly due to high steam temperature but mainly due to the liquid level falling below the tubes leaving an accumulation of corrosive degradation products on the exposed surfaces, normally these corrosive products remain diluted in the MEA solution and cause little corrosion of the covered tubes. Their concentration on the dry upper layers of the hot metal tubes, however, leads to excessive corrosion. (U.K.).
On the motives of moduli of chains and Higgs bundles
García-Prada, Oscar; Schmitt, Alexander
2011-01-01
We take another approach to Hitchin's strategy of computing the cohomology of moduli spaces of Higgs bundles by localization with respect to the circle-action. Our computation is done in the dimensional completion of the Grothendieck ring of varieties and starts by describing the classes of moduli stacks of chains rather than their coarse moduli spaces. As an application we show that the n-torsion of the Jacobian acts trivially on the middle dimensional cohomology of the moduli space of twisted SL_n-Higgs-bundles of degree coprime to n and we give an explicit formula for the motive of the moduli space of Higgs bundles of rank 4 and odd degree. This provides new evidence for a conjecture of Hausel and Rodr\\'iguez-Villegas. Along the way we find explicit recursion formulas for the motives of several types of moduli spaces of stable chains.
Rheology of semiflexible bundle networks with transient linkers.
Müller, Kei W; Bruinsma, Robijn F; Lieleg, Oliver; Bausch, Andreas R; Wall, Wolfgang A; Levine, Alex J
2014-06-13
We present a theoretical and computational analysis of the rheology of networks made up of bundles of semiflexible filaments bound by transient cross-linkers. Such systems are ubiquitous in the cytoskeleton and can be formed in vitro using filamentous actin and various cross-linkers. We find that their high-frequency rheology is characterized by a scaling behavior that is quite distinct from that of networks of the well-studied single semiflexible filaments. This regime can be understood theoretically in terms of a length-scale-dependent bending modulus for bundles. Next, we observe new dissipative dynamics associated with the shear-induced disruption of the network at intermediate frequencies. Finally, at low frequencies, we encounter a region of non-Newtonian rheology characterized by power-law scaling. This regime is dominated by bundle dissolution and large-scale rearrangements of the network driven by equilibrium thermal fluctuations.
DTI Image Registration under Probabilistic Fiber Bundles Tractography Learning
Lei, Tao; Fan, Yangyu; Zhang, Xiuwei
2016-01-01
Diffusion Tensor Imaging (DTI) image registration is an essential step for diffusion tensor image analysis. Most of the fiber bundle based registration algorithms use deterministic fiber tracking technique to get the white matter fiber bundles, which will be affected by the noise and volume. In order to overcome the above problem, we proposed a Diffusion Tensor Imaging image registration method under probabilistic fiber bundles tractography learning. Probabilistic tractography technique can more reasonably trace to the structure of the nerve fibers. The residual error estimation step in active sample selection learning is improved by modifying the residual error model using finite sample set. The calculated deformation field is then registered on the DTI images. The results of our proposed registration method are compared with 6 state-of-the-art DTI image registration methods under visualization and 3 quantitative evaluation standards. The experimental results show that our proposed method has a good comprehensive performance.
Narrow muon bundles from muon pair production in rock
Kudryavtsev, V A; Spooner, N J C
1999-01-01
We revise the process of muon pair production by high-energy muons in rock using the recently published cross-section. The three- dimensional Monte Carlo code MUSIC has been used to obtain the characteristics of the muon bundles initiated via this process. We have compared them with those of conventional muon bundles initiated in the atmosphere and shown that large underground detectors, capable of collecting hundreds of thousands of multiple muon events, can discriminate statistically muon induced bundles from conventional ones. However, we find that the enhancement of the measured muon decoherence function over that predicted at small distances, recently reported by the MACRO experiment, cannot be explained by the effect of muon pair production alone, unless its cross-section is underestimated by a factor of 3. (20 refs).
Narrow muon bundles from muon pair production in rock
Kudryavtsev, V A; Spooner, N J C; 10.1016/S0370-2693(99)01378-7
2009-01-01
We revise the process of muon pair production by high-energy muons in rock using the recently published cross-section. The three-dimensional Monte Carlo code MUSIC has been used to obtain the characteristics of the muon bundles initiated via this process. We have compared them with those of conventional muon bundles initiated in the atmosphere and shown that large underground detectors, capable of collecting hundreds of thousands of multiple muon events, can discriminate statistically muon induced bundles from conventional ones. However, we find that the enhancement of the measured muon decoherence function over that predicted at small distances, recently reported by the MACRO experiment, cannot be explained by the effect of muon pair production alone, unless its cross-section is underestimated by a factor of 3.
High-order synchronization of hair cell bundles
Levy, Michael; Molzon, Adrian; Lee, Jae-Hyun; Kim, Ji-Wook; Cheon, Jinwoo; Bozovic, Dolores
2016-12-01
Auditory and vestibular hair cell bundles exhibit active mechanical oscillations at natural frequencies that are typically lower than the detection range of the corresponding end organs. We explore how these noisy nonlinear oscillators mode-lock to frequencies higher than their internal clocks. A nanomagnetic technique is used to stimulate the bundles without an imposed mechanical load. The evoked response shows regimes of high-order mode-locking. Exploring a broad range of stimulus frequencies and intensities, we observe regions of high-order synchronization, analogous to Arnold Tongues in dynamical systems literature. Significant areas of overlap occur between synchronization regimes, with the bundle intermittently flickering between different winding numbers. We demonstrate how an ensemble of these noisy spontaneous oscillators could be entrained to efficiently detect signals significantly above the characteristic frequencies of the individual cells.
Symposium on Singularities, Representation of Algebras, and Vector Bundles
Trautmann, Günther
1987-01-01
It is well known that there are close relations between classes of singularities and representation theory via the McKay correspondence and between representation theory and vector bundles on projective spaces via the Bernstein-Gelfand-Gelfand construction. These relations however cannot be considered to be either completely understood or fully exploited. These proceedings document recent developments in the area. The questions and methods of representation theory have applications to singularities and to vector bundles. Representation theory itself, which had primarily developed its methods for Artinian algebras, starts to investigate algebras of higher dimension partly because of these applications. Future research in representation theory may be spurred by the classification of singularities and the highly developed theory of moduli for vector bundles. The volume contains 3 survey articles on the 3 main topics mentioned, stressing their interrelationships, as well as original research papers.
4d SCFTs from negative-degree line bundles
Nardoni, Emily
2016-01-01
We construct 4d $\\mathcal{N}=1$ quantum field theories by compactifying the (2,0) theories on a Riemann surface with genus $g$ and $n$ punctures, where the normal bundle decomposes into a sum of two line bundles with possibly negative degrees $p$ and $q$. Until recently, the only available field-theoretic constructions required the line bundle degrees to be nonnegative, although supergravity solutions were constructed in the literature for the zero-puncture case for all $p$ and $q$. Here, we provide field-theoretic constructions and computations of the central charges of 4d $\\mathcal{N}=1$ SCFTs that are the IR limit of M5-branes wrapping a surface with general $p$ or $q$ negative, for general genus $g$ and number of maximal punctures $n$.
Simulation of bundle test Quench-12 with integral code MELCOR
Duspiva, J. [Nuclear Research Inst., Rez plc (Czech Republic)
2011-07-01
The past NRI analyses cover the Quench-01, Quench-03 and Quench-06 with version MELCOR 1.8.5 (including reflood model), and Quench-01 and Quench-11 tests with the latest version MELCOR 1.8.6. The Quench-12 test is specific, because it has different bundle configuration related to the VVER bundle configuration with hexagonal grid of pins and also used E110 cladding material. Specificity of Quench-12 test is also in the used material of fuel rod cladding - E110. The test specificities are a reason for the highest concern, because the VVER reactors are operated in the Czech Republic. The new input model was developed with the taking into account all experience from previous simulations of the Quench bundle tests. The recent version MELCOR 1.8.6 YU{sub 2}911 was used for the simulation with slightly modified ELHEAT package. Sensitivity studies on input parameters and oxidation kinetics were performed. (author)
Multi-scale strain-stiffening of semiflexible bundle networks
Piechocka, I K; Broedersz, C P; Kurniawan, N A; MacKintosh, F C; Koenderink, G H
2015-01-01
Bundles of polymer filaments are responsible for the rich and unique mechanical behaviors of many biomaterials, including cells and extracellular matrices. In fibrin biopolymers, whose nonlinear elastic properties are crucial for normal blood clotting, protofibrils self-assemble and bundle to form networks of semiflexible fibers. Here we show that the extraordinary strain-stiffening response of fibrin networks is a direct reflection of the hierarchical architecture of the fibrin fibers. We measure the rheology of networks of unbundled protofibrils and find excellent agreement with an affine model of extensible wormlike polymers. By direct comparison with these data, we show that physiological fibrin networks composed of thick fibers can be modeled as networks of tight protofibril bundles. We demonstrate that the tightness of coupling between protofibrils in the fibers can be tuned by the degree of enzymatic intermolecular crosslinking by the coagulation Factor XIII. Furthermore, at high stress, the protofibri...
Real Parabolic Vector Bundles over a Real Curve
Sanjay Amrutiya
2014-02-01
We define real parabolic structures on real vector bundles over a real curve. Let $(X, _X)$ be a real curve, and let $S\\subset X$ be a non-empty finite subset of such that $_X(S) = S$. Let ≥ 2 be an integer. We construct an -fold cyclic cover : $Y→ X$ in the category of real curves, ramified precisely over each point of , and with the property that for any element of the Galois group , and any $y\\in Y$, one has $_Y(gy) = g^{-1}_Y(y)$. We established an equivalence between the category of real parabolic vector bundles on $(X,_X)$ with real parabolic structure over , all of whose weights are integral multiples of 1/, and the category of real -equivariant vector bundles on $(Y, _Y)$.
Magnetic Propulsion of Microswimmers with DNA-Based Flagellar Bundles.
Maier, Alexander M; Weig, Cornelius; Oswald, Peter; Frey, Erwin; Fischer, Peer; Liedl, Tim
2016-02-10
We show that DNA-based self-assembly can serve as a general and flexible tool to construct artificial flagella of several micrometers in length and only tens of nanometers in diameter. By attaching the DNA flagella to biocompatible magnetic microparticles, we provide a proof of concept demonstration of hybrid structures that, when rotated in an external magnetic field, propel by means of a flagellar bundle, similar to self-propelling peritrichous bacteria. Our theoretical analysis predicts that flagellar bundles that possess a length-dependent bending stiffness should exhibit a superior swimming speed compared to swimmers with a single appendage. The DNA self-assembly method permits the realization of these improved flagellar bundles in good agreement with our quantitative model. DNA flagella with well-controlled shape could fundamentally increase the functionality of fully biocompatible nanorobots and extend the scope and complexity of active materials.
Gradient Bundle Analysis: A Full Topological Approach to Chemical Bonding
Morgenstern, Amanda
2016-01-01
The "chemical bond" is a central concept in molecular sciences, but there is no consensus as to what a bond actually is. Therefore, a variety of bonding models have been developed, each defining the structure of molecules in a different manner with the goal of explaining and predicting chemical properties. This thesis describes the initial development of gradient bundle analysis (GBA), a chemical bonding model that creates a high resolution picture of chemical interactions within the charge density framework. GBA is based on concepts from the quantum theory of atoms in molecules (QTAIM), but uses a more complete picture of the topology and geometry of the electron charge density to understand and predict bonding interactions. Gradient bundles are defined as volumes bounded by zero-flux surfaces (ZFSs) in the gradient of the charge density with well-defined energies. The structure of gradient bundles provides an avenue for detecting the locations of valence electrons, which correspond to reactive regions in a ...
When Is Holography Consistent?
McInnes, Brett
2015-01-01
Holographic duality relates two radically different kinds of theory: one with gravity, one without. The very existence of such an equivalence imposes strong consistency conditions which are, in the nature of the case, hard to satisfy. Recently a particularly deep condition of this kind, relating the minimum of a probe brane action to a gravitational bulk action (in a Euclidean formulation), has been recognised; and the question arises as to the circumstances under which it, and its Lorentzian counterpart, are satisfied. We discuss the fact that there are physically interesting situations in which one or both versions might, in principle, \\emph{not} be satisfied. These arise in two distinct circumstances: first, when the bulk is not an Einstein manifold, and, second, in the presence of angular momentum. Focusing on the application of holography to the quark-gluon plasma (of the various forms arising in the early Universe and in heavy-ion collisions), we find that these potential violations never actually occur...
The Analysis of SBWR Critical Power Bundle Using Cobrag Code
Yohannes Sardjono
2013-03-01
Full Text Available The coolant mechanism of SBWR is similar with the Dodewaard Nuclear Power Plant (NPP in the Netherlands that first went critical in 1968. The similarity of both NPP is cooled by natural convection system. These coolant concept is very related with same parameters on fuel bundle design especially fuel bundle length, core pressure drop and core flow rate as well as critical power bundle. The analysis was carried out by using COBRAG computer code. COBRAG computer code is GE Company proprietary. Basically COBRAG computer code is a tool to solve compressible three-dimensional, two fluid, three field equations for two phase flow. The three fields are the vapor field, the continuous liquid field, and the liquid drop field. This code has been applied to analyses model flow and heat transfer within the reactor core. This volume describes the finitevolume equations and the numerical solution methods used to solve these equations. This analysis of same parameters has been done i.e.; inlet sub cooling 20 BTU/lbm and 40 BTU/lbm, 1000 psi pressure and R-factor is 1.038, mass flux are 0.5 Mlb/hr.ft2, 0.75 Mlb/hr.ft2, 1.00 Mlb/hr.ft2 and 1.25 Mlb/hr.ft2. Those conditions based on history operation of some type of the cell fuel bundle line at GE Nuclear Energy. According to the results, it can be concluded that SBWR critical power bundle is 10.5 % less than current BWR critical power bundle with length reduction of 12 ft to 9 ft.
[Benign mature teratomas of the mediastinum].
Ayadi-Kaddour, A; Ismail, O; Hassen, F; Smati, B; Djilani, H; Kilani, T; El Mezni, F
2008-05-01
Mature teratomas of the mediastinum are rare. However, they represent the most common mediastinal germ cell tumours. The aim of this study is to describe their clinical and pathological characteristics. Fourteen cases of mediastinal mature teratoma, diagnosed between January 1992 and December 2006, were reviewed retrospectively, noting the clinical, radiological, surgical, and pathological findings. The patient population consisted of 10 females and 4 males with mean age of 29 years (5-56 years). Chest pain was the main symptom. Imaging features comprised a heterogeneous anterior mediastinal mass containing soft-tissue, fluid, fat, or calcium attenuation, or any combination of the four. Macroscopically all the tumours were cystic, or predominantly cystic, containing mostly grumous material. The mean size was 9 cm (5-12 cm). Histological examination constantly revealed skin with or without appendages. Other components identified were bronchial mucosa (12 cases), fat (12 cases), muscle (10 cases), cartilage (8 cases), bone (7 cases), gastrointestinal mucosa (7 cases), pancreas (5 cases), urothelial epithelium (3 cases), nervous and prostatic tissues (one case each). All the teratomas were mature, and 7 of them were intrathymic. Every form of teratoma occurs in the mediastinum (mature, immature and with malignant transformation) but, in our study, they were exclusively mature. The histology is essentially similar to that of teratomas of gonads. However, pancreatic tissue occurs frequently in mediastinum (54% in literature, 25% in our study) but not in the gonads. On the other hand, thyroid follicles have not yet been seen in mediastinal teratomas.
Chern-Simons functional under gauge transformations on flat bundles
Byun, Yanghyun; Kim, Joohee
2017-01-01
We describe the effect of a gauge transformation on the Chern-Simons functional in a thorough and unifying manner. We use the assumptions that the structure group is compact and connected and, in particular, that the principal bundle is flat. The Chern-Simons functional we consider is the one defined by choosing a flat reference connection. The most critical step in arriving at the main result is to show both the existence and the uniqueness of a cohomology class on the adjoint bundle such that it is the class of the so-called Maurer-Cartan 3-form when restricted to each fiber.
BUNDLE ADJUSTMENTS CCD CAMERA CALIBRATION BASED ON COLLINEARITY EQUATION
Liu Changying; Yu Zhijing; Che Rensheng; Ye Dong; Huang Qingcheng; Yang Dingning
2004-01-01
The solid template CCD camera calibration method of bundle adjustments based on collinearity equation is presented considering the characteristics of space large-dimension on-line measurement. In the method, a more comprehensive camera model is adopted which is based on the pinhole model extended with distortions corrections. In the process of calibration, calibration precision is improved by imaging at different locations in the whole measurement space, multi-imaging at the same location and bundle adjustments optimization. The calibration experiment proves that the calibration method is able to fulfill calibration requirement of CCD camera applied to vision measurement.
Cellulosic Fibers: Effect of Processing on Fiber Bundle Strength
Thygesen, Anders; Madsen, Bo; Thomsen, Anne Belinda;
2011-01-01
A range of differently processed cellulosic fibers from flax and hemp plants were investigated to study the relation between processing of cellulosic fibers and fiber bundle strength. The studied processing methods are applied for yarn production and include retting, scutching, carding, and cotto......A range of differently processed cellulosic fibers from flax and hemp plants were investigated to study the relation between processing of cellulosic fibers and fiber bundle strength. The studied processing methods are applied for yarn production and include retting, scutching, carding...
Dialytic Separation of Bundled, Functionalized Carbon Nanotubes from Carbonaceous Impurities
J. Justin Mulvey
2014-11-01
Full Text Available Separating functionalized single-wall carbon nanotubes (SWCNTs from functionalized amorphous carbon is challenging, due to their polydispersity and similar physicochemical properties. We describe a single-step, dialytic separation method that takes advantage of the ability of heavily functionalized SWCNTs to bundle in a polar environment while maintaining their solubility. Experiments on functionalized SWCNTs were compared with functionalized, C60 fullerenes (buckyballs to probe the general applicability of the method and further characterize the bundling process. This approach may simultaneously be used to purify a functionalization reaction mixture of unreacted small molecules and of residual solvents, such as dimethylformamide.
Milnor-Wood type inequalities for Higgs bundles
Hartnick, Tobias
2011-01-01
We explain how the generalized Milnor-Wood inequality of Burger and Iozzi for reductive representations of a cocompact complex-hyperbolic lattice into a Hermitian Lie group translates under Simpson's non-abelian Hodge correspondence into an inequality for topological invariants of the corresponding Higgs bundles. In this way, we obtain an inequality that holds for all Hermitian Lie groups, generalizing the Milnor-Wood type inequalities for Higgs bundles that have been proved for the classical Hermitian Lie groups by Bradlow, Garcia-Prada, and Gothen and by Koziarz and Maubon.
Einstein Manifolds, Abelian Instantons, Bundle Reduction, and the Cosmological Constant
Soo, C P
2001-01-01
The anti-self-dual projection of the spin connections of certain four-dimensional Einstein manifolds can be Abelian in nature. These configurations signify bundle reductions. By a theorem of Kobayashi and Nomizu such a process is predicated on the existence of a covariantly constant field. It turns out that even without fundamental Higgs fields and other physical matter, gravitational self-interactions can generate this mechanism if the cosmological constant is non-vanishing. This article identifies the order parameter, and clarifies how these Abelian instanton solutions are associated with a Higgs triplet which causes the bundle reduction from SO(3) gauge group to U(1).
Arthroscopic double-bundle posterior cruciate ligament reconstruction surgical technique.
Fanelli, Gregory C; Beck, John D; Edson, Craig J
2010-06-01
The keys to successful posterior cruciate ligament (PCL) reconstruction are to identify and treat all pathology, use strong graft material, accurately place tunnels in anatomic insertion sites, minimize graft bending, use a mechanical graft tensioning device, use primary and back-up graft fixation, and use the appropriate postoperative rehabilitation program. Adherence to these technical principles results in successful single-bundle and double-bundle arthroscopic transtibial tunnel PCL reconstruction based on stress radiography, arthrometer, knee ligament rating scales, and patient satisfaction measurements.
Capillary Micro-Flow Through a Fiber Bundle(Ⅰ)
ZHU Ying-dan; WANG Ji-hui; TAN Hua; GAO Guo-qiang
2004-01-01
The present work considered the capillary micro-flow through a fiber bundle. The resin heights in the fiber bundle as a function of time were used to determine the experimental values of capillary pressure and the permeability by the nonlinear regression fitting method. The fitting curves showed a good agreement with experiments. However, these values of capillary pressure from short- time experiments were much lower than the theoretical results from the Yang-Laplace Equation. More accurate capillary pressure was predicted from the presented long-run experiment.
Dunkl Operators as Covariant Derivatives in a Quantum Principal Bundle
Durdevich, Micho; Sontz, Stephen Bruce
2013-05-01
A quantum principal bundle is constructed for every Coxeter group acting on a finite-dimensional Euclidean space E, and then a connection is also defined on this bundle. The covariant derivatives associated to this connection are the Dunkl operators, originally introduced as part of a program to generalize harmonic analysis in Euclidean spaces. This gives us a new, geometric way of viewing the Dunkl operators. In particular, we present a new proof of the commutativity of these operators among themselves as a consequence of a geometric property, namely, that the connection has curvature zero.
Dunkl Operators as Covariant Derivatives in a Quantum Principal Bundle
Micho Đurđevich
2013-05-01
Full Text Available A quantum principal bundle is constructed for every Coxeter group acting on a finite-dimensional Euclidean space E, and then a connection is also defined on this bundle. The covariant derivatives associated to this connection are the Dunkl operators, originally introduced as part of a program to generalize harmonic analysis in Euclidean spaces. This gives us a new, geometric way of viewing the Dunkl operators. In particular, we present a new proof of the commutativity of these operators among themselves as a consequence of a geometric property, namely, that the connection has curvature zero.
Dunkl Operators as Covariant Derivatives in a Quantum Principal Bundle
evich, Micho Đurđ
2011-01-01
A quantum principal bundle is constructed for every Coxeter group acting on a finite-dimensional Euclidean space E, and then a connection is also defined on this bundle. The covariant derivatives associated to this connection are the Dunkl operators, originally introduced as part of a program to generalize harmonic analysis in Euclidean spaces. This gives us a new, geometric way of viewing the Dunkl operators. In particular, we present a new proof of the commutivity of these operators among themselves as a consequence of a geometric property, namely, that the connection has curvature zero.
Quillen Bundle and Geometric Prequantization of Non-Abelian Vortices on a Riemann Surface
Rukmini Dey; Samir K Paul
2011-02-01
In this paper we prequantize the moduli space of non-abelian vortices. We explicitly calculate the symplectic form arising from 2 metric and we construct a prequantum line bundle whose curvature is proportional to this symplectic form. The prequantum line bundle turns out to be Quillen’s determinant line bundle with a modified Quillen metric. Next, as in the case of abelian vortices, we construct line bundles over the moduli space whose curvatures form a family of symplectic forms which are parametrized by $\\Psi_0$, a section of a certain bundle. The equivalence of these prequantum bundles are discussed.
The Determinant Bundle on the Moduli Space of Stable Triples over a Curve
Indranil Biswas; N Raghavendra
2002-08-01
We construct a holomorphic Hermitian line bundle over the moduli space of stable triples of the form (1, 2, ), where 1 and 2 are holomorphic vector bundles over a fixed compact Riemann surface , and : 2 → 1 is a holomorphic vector bundle homomorphism. The curvature of the Chern connection of this holomorphic Hermitian line bundle is computed. The curvature is shown to coincide with a constant scalar multiple of the natural Kähler form on the moduli space. The construction is based on a result of Quillen on the determinant line bundle over the space of Dolbeault operators on a fixed ∞ Hermitian vector bundle over a compact Riemann surface.
Lasrado, Lester Allan; Vatrapu, Ravi; Mukkamala, Raghava Rao
2017-01-01
of understanding of the potential impact of (a) choice of the quantitative approach, and (b) scale of measurement on the design and assessment of the maturity model. To address these two methodological issues, we analysed a social media maturity data set and computed maturity scores using different quantitative......This paper presents results from an ongoing empirical study that seeks to understand the influence of different quantitative methods on the design and assessment of maturity models. Although there have been many academic publications on maturity models, there exists a significant lack...
The Maturely, Immature Orientale Impact Basin
Cahill, J. T.; Lawrence, D. J.; Stickle, A. M.; Delen, O.; Patterson, G.; Greenhagen, B. T.
2015-12-01
Lunar surface maturity is consistently examined using the NIR optical maturity parameter (OMAT) [1]. However, the NIR only provides a perspective of the upper microns of the lunar surface. Recent studies of Lunar Prospector (LP) and Lunar Reconnaissance Orbiter data sets are now demonstrating additional measures of maturity with sensitivities to greater depths (~2 m) in the regolith. These include thermal infrared, S-band radar, and epithermal neutron data sets [2-4]. Interestingly, each of these parameters is directly comparable to OMAT despite each measuring slightly different aspects of the regolith. This is demonstrated by Lawrence et al. [3] where LP-measured non-polar highlands epithermal neutrons trend well with albedo, OMAT, and the Christensen Feature (CF). Lawrence et al. [3] used these data to derive and map highlands hydrogen (H) which is dominantly a function of H-implantation. With this in mind, areas of enriched-H are mature, while areas of depleted H are immature. Surface roughness as measured by S-band radar [4], also provides a measure of maturity. In this case, the circular polarization ratio (CPR) is high when rough and immature, and low when smooth and mature. Knowing this, one can recognize areas in the non-polar lunar highlands that show contradictory measures of maturity. For example, while many lunar localities show consistently immature albedo, OMAT, CF, CPR, and H concentrations (e.g., Tycho), others do not. Orientale basin is the most prominent example, shown to have immature CPR, CF, and H concentrations despite a relatively mature albedo and OMAT values as well as an old age determination (~3.8 Ga). To better understand how the lunar regolith is weathering in the upper 1-2 m of regolith with time we examine the Orientale basin relative to other highlands regions. [1] Lucey et al. (2000) JGR, 105, 20377; [2] Lucey et al. (2013) LPSC, 44, 2890; [3] Lawrence et al. (2015) Icarus, j.icarus.2015.01.005; [4] Neish et al. (2013) JGR, 118
Hussey, Peter S; Mulcahy, Andrew W; Schnyer, Christopher; Schneider, Eric C
2012-08-01
"Bundled payment" is a method in which payments to health care providers are related to the predetermined expected costs of a grouping, or "bundle," of related health care services. The intent of bundled payment systems is to decrease health care spending while improving or maintaining the quality of care. To systematically review studies of the effects of bundled payment on health care spending and quality, and to examine key design and contextual features of bundled payment programs and their association with program effectiveness. Electronic literature search of PubMed® and the Cochrane Library for studies published between 1985 and 2011. Title and abstract review followed by full-text review to identify studies that assessed the effect of bundled payment on health care spending and/or quality. Two authors independently abstracted data on study design, intervention design, context, comparisons, and findings. Reviewers rated the strength of individual studies as well as the strength and applicability of the body of evidence overall. Differences between reviewers were reconciled by consensus. Studies were categorized by bundled payment program and narratively summarized. We reviewed 58 studies, excluding studies of the Medicare Inpatient Prospective Payment System, for which we reviewed 4 review articles. Most studies (57 of 58) were observational or descriptive; 1 study employed randomization of providers, and none employed random assignment of patients to treatment and control groups. The included studies examined 20 different bundled payment interventions, 16 of which focused on single institutional providers. The introduction of bundled payment was associated with: (1) reductions in health care spending and utilization, and (2) inconsistent and generally small effects on quality measures. These findings were consistent across different bundled payment programs and settings, but the strength of the body of evidence was rated as low, due mainly to concerns
Logging residue bundling at the roadside in mountain operations
Spinelli, Raffaele; Magagnotti, Natascia (NR IVALSA, Sesto Fiorentino (Italy))
2009-04-15
The recovery of logging residue offers many benefits, and can be effectively performed with several techniques. This study presents the results of four distinct trials conducted on the Italian Alps with a truck-mounted bundler, and compares them with the figures obtained by the Austrian and German colleagues on the other side of the Alps. Average productivity varied between 14 and 22 bundles per productive machine hour (PMH), or between 10 and 15 bundles per scheduled machine hour (SMH). Mass production ranged from 3.1 to 4.3 oven-dry tonnes /SMH. If the machine is used for at least 800 SMH/year bundling costs will range between Euro 7 and 9/MWh, which is within the profitability limit indicated in Nordic studies. Although bundling may represent an additional cost in the slash-to-chip chain, it offers the important benefit of efficient outdoor winter storage, which is crucial in a region where the supply and demand of fuel biomass are often diachronic. The truck-mounted bundler used on the Alps adopts the same mechanism and achieves the same performance of the Nordic forwarder-mounted application. The main difference lies in its superior road mobility, which is crucial when covering scattered landings
Euler-Lagrange Forms and Cohomology Groups on Jet Bundles
CHEN Jing-Bo
2005-01-01
@@ Using the language of jet bundles, we generalize the definitions of Euler-Lagrange one-form and the associated cohomology which were introduced by Guo et al. [Commun. Theor. Phys. 37(2002)1]. Continuous and discreteLagrange mechanics and field theory are presented. Higher order Euler-Lagrange cohomology groups are also introduced.
Get ready: Bundled payments are in your future.
2015-09-01
The Centers for Medicare & Medicaid Services' (CMS') mandatory bundled payment pilot project makes clear that the agency intends to reform Medicare reimbursement. Hospitals in 75 geographic areas are required to participate in a five-year pilot project that puts them at risk for the cost of hip and knee replacements from the time of surgery until 90 days after discharge. Already, more than 6,500 providers are participating in the Bundled Payments for Care Improvement project, a voluntary program where participants can choose from 48 clinical episodes and four models. Even if they won't be part of a bundled payments arrangement, case managers need to shift their thinking to prepare for the future of reimbursement by developing close working relationships with post-acute providers, knowing the services and quality delivered by post-acute providers, and being aware of the costs for the entire episode of care. Case managers will not be able to handle all the responsibilities necessary in a bundled payment arrangement if they have large caseloads.
Hair Cells: Bundles, Tuning, Transduction—A Moderated Discussion
Karavitaki, K. Domenica; Ricci, Anthony J.
2011-11-01
A discussion moderated by the authors on the topic "Hair Cells: Bundles, Tuning, Transduction" was held on 17 July 2011 at the 11th International Mechanics of Hearing Workshop in Williamstown, Massachusetts. The paper provides an edited transcript of the session.
AdS 3-manifolds and Higgs bundles
Alessandrini, Daniele; Li, Qiongling
2015-01-01
In this paper we investigate the relationships between closed AdS 3-manifolds and Higgs bundles. We have a new way to construct AdS structures that allows us to see many of their properties explicitly, for example we can recover the very recent formula by Tholozan for the volumes. We also find...
Geometric Description of Fibre Bundle Surface for Birkhoff System
CAO Li-Mei; SUN Hua-Fei; ZHANG Zhen-Ning
2009-01-01
A fibre bundle surface for the BirkhofT system is constructed.The metric and the Riemannian connection of the surface are defined and the representation of the Gaussian curvature of this surface is presented.Finally,three examples for the Birkhoff system are given to illustrate our results.
Self-adjointness of the Gaffney Laplacian on Vector Bundles
Bandara, Lashi, E-mail: lashi.bandara@chalmers.se [Chalmers University of Technology and University of Gothenburg, Mathematical Sciences (Sweden); Milatovic, Ognjen, E-mail: omilatov@unf.edu [University of North Florida, Department of Mathematics and Statistics (United States)
2015-12-15
We study the Gaffney Laplacian on a vector bundle equipped with a compatible metric and connection over a Riemannian manifold that is possibly geodesically incomplete. Under the hypothesis that the Cauchy boundary is polar, we demonstrate the self-adjointness of this Laplacian. Furthermore, we show that negligible boundary is a necessary and sufficient condition for the self-adjointness of this operator.
Moduli of Parabolic Higgs Bundles and Atiyah Algebroids
Logares, Marina; Martens, Johan
2010-01-01
. By considering the case of full flags, we get a Grothendieck–Springer resolution for all other flag types, in particular for the moduli spaces of twisted Higgs bundles, as studied by Markman and Bottacin and used in the recent work of Laumon–Ngô. We discuss the Hitchin system, and demonstrate that all...
Heat transfer from a tube bundle in a bubble column
Saxena, S.C.; Vadivel, R.
1988-09-01
Heat transfer coefficient for an immersed five tube bundle in a two-phase (air-water) bubble column is measured as a function of air velocity and other relevant parameters. Average and local air holdup are also measured under identical conditions to characterize the system uniquely.
Chest drain care bundle: Improving documentation and safety.
Hutton, Joe; Graham, Selina
2015-01-01
Chest drain insertion is a common advanced procedure with a significant associated risk of pain, distress, and complications. Nationally, audit and recommendations from leading bodies have highlighted a number of safety concerns around chest drain insertion. Audit work has demonstrated poor levels of documentation; particularly around use of premedication, use of ultrasound guidance and consent. This has obvious potential consequences for patient safety and thus is an important target for improvement work. This project quantifies current standards of documentation and aims to improve this through a combination of accessible and easy to read guidelines, education, and the introduction of a chest drain insertion bundle. National best practice standards were identified through review of national guidance. Drain insertion was prospectively analysed over a three month period to establish baseline standards of documentation. This initial work was presented and a bundle and clinical guidelines produced. Chest drain insertion was then reaudited and assessed for improvement. Results demonstrated an improvement in many areas of documentation, pushing local results above the national average. However, only 40% of cases used the new bundle due to a mixture of staff rotation and an unexpectedly high proportion of drains inserted in non targeted areas including the emergency department, theatre, and intensive care. Despite this, the introduction of accessible guidance and bundle has significantly improved chest drain insertion documentation to the benefit of all.
MYOCARDIAL DEFORMATION AND COMPLETE LEFT BUNDLE BRANCH BLOCK
E. N. Pavlyukova
2015-12-01
Full Text Available Tissue Doppler imaging is evolving as a useful echocardiographic tool for quantitative assessment of left ventricular systolic and diastolic function. Over the last 10 years, myocardial deformation imaging has become possible initially with tissue Doppler , and more recently with myocardial speckle-tracking using 2D echocardiography. Unlike simple tissue velocity measurements, deformation measurements are specific for the region of interest. Strain rate or strain measurements have been used as sensitive indicators for subclinical diseases, and it is the most widely used tool to assess mechanical dyssynchrony. Left bundle branch block is a frequent, etiologically heterogeneous, clinically hostile and diagnostically challenging entity. About 2% of patients underwent cardiac stress testing show stable or intermittent left bundle branch block. Presence of left bundle branch block is associated with a lower and slower diastolic coronary flow velocity especially during hyperemia. Stress echocardiography is the best option for the diagnosis of ischemic heart disease, albeit specificity and sensitivity reduce in patients with left bundle branch block in the territory of left anterior descending artery in presence of initial septum dyskinesia.
The Roach muscle bundle and umbilical cord coiling
de Laat, Monique W. M.; Nikkels, Peter G. J.; Franx, Arie; Visser, Gerard H. A.
2007-01-01
Objective: To determine if presence of the Roach muscle, a small muscle bundle tying just beside the umbilical artery, contributes to umbilical cord coiling. Methods: 251 umbilical cords were examined. The umbilical coiling index (UCI) was calculated as the number of coils divided by the cord length
Thermal conversion of bundled carbon nanotubes into graphitic ribbons.
Gutiérrez, H R; Kim, U J; Kim, J P; Eklund, P C
2005-11-01
High temperature heat treatment (HTT) of bundled single-walled carbon nanotubes (SWNTs) in vacuum ( approximately 10(-5) Torr) has been found to lead to the formation of two types of graphitic nanoribbons (GNRs), as observed by high-resolution transmission electron microscopy. Purified SWNT bundles were first found to follow two evolutionary steps, as reported previously, that is, tube coalescence (HTT approximately 1400 degrees C) and then massive bond rearrangement (HTT approximately 1600 degrees C), leading to the formation of bundled multiwall nanotubes (MWNTs) with 3-12 shells. At HTT > 1800 degrees C, we find that these MWNTs collapse into multishell GNRs. The first type of GNR we observed is driven by the collapse of diameter-doubled single-wall nanotubes, and their production is terminated at HTT approximately 1600 degrees C when the MWNTs also start to form. We propose that the collapse is driven by van der Waals forces between adjacent tubes in the same bundle. For HTT > 2000 degrees C, the heat-treated material is found to be almost completely in the multishell GNR form.
On $(k,l)$-stable vector bundles over algebraic curves
Mata-Gutiérrez, Osbaldo
2012-01-01
In this paper, we study the $(k,l)$-stable vector bundles over non-singular projective curve $X$ of genus $g\\geq 2,$ its relation with stability and Segre invariants. For rank 2 and 3, we give an explicit description and relation of $(k,l)$-stability and Brill-Noether loci.
Almost Lie structures on an anchored Banach bundle
Cabau, Patrick
2011-01-01
Under appropriate assumptions, we generalize the concept of linear almost Poisson struc- tures, almost Lie algebroids, almost differentials in the framework of Banach anchored bundles and the relation between these objects. We then obtain an adapted formalism for mechanical systems which is illustrated by the evolutionary problem of the "Hilbert snake"
Frame-independent mechanics:geometry on affine bundles
Grabowska, K.; Grabowski, J.; Urbanski, P.
2005-01-01
Main ideas of the differential geometry on affine bundles are presented. Affine counterparts of Lie algebroid and Poisson structures are introduced and discussed. The developed concepts are applied in a frame-independent formulation of the time-dependent and the Newtonian mechanics.
Fission yeast Scp3 potentially maintains microtubule orientation through bundling.
Kanako Ozaki
Full Text Available Microtubules play important roles in organelle transport, the maintenance of cell polarity and chromosome segregation and generally form bundles during these processes. The fission yeast gene scp3+ was identified as a multicopy suppressor of the cps3-81 mutant, which is hypersensitive to isopropyl N-3-chlorophenylcarbamate (CIPC, a poison that induces abnormal multipolar spindle formation in higher eukaryotes. In this study, we investigated the function of Scp3 along with the effect of CIPC in the fission yeast Schizosaccharomyces pombe. Microscopic observation revealed that treatment with CIPC, cps3-81 mutation and scp3+ gene deletion disturbed the orientation of microtubules in interphase cells. Overexpression of scp3+ suppressed the abnormal orientation of microtubules by promoting bundling. Functional analysis suggested that Scp3 functions independently from Ase1, a protein largely required for the bundling of the mitotic spindle. A strain lacking the ase1+ gene was more sensitive to CIPC, with the drug affecting the integrity of the mitotic spindle, indicating that CIPC has a mitotic target that has a role redundant with Ase1. These results suggested that multiple systems are independently involved to ensure microtubule orientation by bundling in fission yeast.
Bohr--Sommerfeld Lagrangians of moduli spaces of Higgs bundles
Biswas, Indranil; Gammelgaard, Niels Leth; Logares, Marina
Let $X$ be a compact connected Riemann surface of genus at least two. Let $M_H(r,d)$ denote the moduli space of semistable Higgs bundles on $X$ of rank $r$ and degree $d$. We prove that the compact complex Bohr-Sommerfeld Lagrangians of $M_H(r,d)$ are precisely the irreducible components of the n...
Multicell slug flow heat transfer analysis of finite LMFBR bundles
Yeung, M.K.; Wolf, L.
1978-12-01
An analytical two-dimensional, multi-region, multi-cell technique has been developed for the thermal analysis of LMFBR rod bundles. Local temperature fields of various unit cells were obtained for 7, 19, and 37-rod bundles of different geometries and power distributions. The validity of the technique has been verified by its excellent agreement with the THTB calculational result. By comparing the calculated fully-developed circumferential clad temperature distribution with those of the experimental measurements, an axial correction factor has been derived to account for the entrance effect for practical considerations. Moreover, the knowledge of the local temperature field of the rod bundle leads to the determination of the effective mixing lengths L/sub ij/ for adjacent subchannels of various geometries. It was shown that the implementation of the accurately determined L/sub ij/ into COBRA-IIIC calculations has fairly significant effects on intersubchannel mixing. In addition, a scheme has been proposed to couple the 2-D distributed and lumped parameter calculation by COBRA-IIIC such that the entrance effect can be implanted into the distributed parameter analysis. The technique has demonstrated its applicability for a 7-rod bundle and the results of calculation were compared to those of three-dimensional analyses and experimental measurements.
Temperature response of bundle-sheath conductance in maize leaves
Yin, Xinyou; Putten, Van Der Peter E.L.; Struik, Paul C.; Driever, Steven M.
2016-01-01
A small bundle-sheath conductance (g _{bs}) is essential for the C_{4} CO_{2}-concentrating mechanism to suppress photorespiration effectively. To predict the productivity of C_{4} crops accurately under global warming, it is necessary to examine whether and how g
Negotiating over bundles and prices using aggregate knowledge
Somefun, D.J.A.; Klos, T.B.; La Poutré, J.A.
2004-01-01
Combining two or more items and selling them as one good, a practice called bundling, can be a very effective strategy for reducing the costs of producing, marketing, and selling goods. In this paper, we consider a form of multi-issue negotiation where a shop negotiates both the contents and the pri
A note on stochastic calculus in vector bundles
Catuogno, Pedro J; Ruffino, Paulo R
2011-01-01
The aim of these notes is to relate covariant stochastic integration in a vector bundle $E$ (as in Norris \\cite{Norris}) with the usual Stratonovich calculus via the connector $\\K:TE \\rightarrow E$ (cf. e.g. Paterson \\cite{Paterson} or Poor \\cite{Poor}) which carries the connection dependence.
Exposure Control Using Adaptive Multi-Stage Item Bundles.
Luecht, Richard M.
This paper presents a multistage adaptive testing test development paradigm that promises to handle content balancing and other test development needs, psychometric reliability concerns, and item exposure. The bundled multistage adaptive testing (BMAT) framework is a modification of the computer-adaptive sequential testing framework introduced by…
Rigidity of Minimal Submanifolds with Flat Normal Bundle
Hai-Ping Fu
2010-09-01
Let $M^n(n≥ 3)$ be an -dimensional complete immersed $\\frac{n-2}{n}$-superstable minimal submanifold in an $(n+p)$-dimensional Euclidean space $\\mathbb{R}^{n+p}$ with flat normal bundle. We prove that if the second fundamental form of satisfies some decay conditions, then is an affine plane or a catenoid in some Euclidean subspace.
Chordee repair utilizing a novel technique ensuring neurovascular bundle preservation.
Dean, G E; Burno, D K; Zaontz, M R
2000-03-01
Penile chordee, with and without hypospadias, is amenable to surgical correction. The Nesbit technique of dorsal plication of the ventral tunica albuginea is effective in correcting most cases of corporal disproportion. A hazard with this approach is the potential inclusion of the dorsal neurovascular bundle, with resultant erectile and sensory dysfunction. We developed a simple technique using the Freer elevator to isolate the neurovascular bundle prior to plication. This ensures that no injury occurs to the neurovascular bundle during plication. Since 1994, 37 boys with chordee have been repaired using this approach. Their ages at the time of operation ranged from 5 months to 28 years (mean 9 months). Following standard degloving of the penis, an incision through Buck's fascia is made lateral and parallel to the neurovascular bundle at the maximum level of the chordee. A similar incision is carried out on the contralateral side. A 4-mm-wide Freer elevator is positioned under Buck's fascia while hugging the tunica albuginea. The Freer elevator slides across the midline to the contralateral side, separating Buck's fascia and underlying layers from the tunica albuginea. Following isolation of the bundle, each corporal body is plicated by creating a longitudinal incision through the tunica albuginea, which then is closed transversely with a 5-0 polydioxanone suture. Buck's fascia subsequently is closed with an absorbable suture following confirmation of chordee correction. No complications have been encountered during a mean follow-up of 21 months (range 5-51 months). No patients have required reoperation for persistent chordee. We developed a technique that elevates the neurovascular bundle prior to plication, thereby ensuring no injury to this structure. We have successfully used this modified Nesbit technique since 1994 and have had no complications. Utilization of the Freer elevator adds an estimated 5 minutes to chordee correction compared to a standard
A comprehensive comparison on vibration and heat transfer of two elastic heat transfer tube bundles
闫柯; 葛培琪; 翟强
2015-01-01
Elastic heat transfer tube bundles are widely used in the field of flow-induced vibration heat transfer enhancement. Two types of mainly used tube bundles, the planar elastic tube bundle and the conical spiral tube bundle were comprehensively compared in the condition of the same shell side diameter. The natural mode characteristics, the effect of fluid−structure interaction, the stress distribution, the comprehensive heat transfer performance and the secondary fluid flow of the two elastic tube bundles were all concluded and compared. The results show that the natural frequency and the critical velocity of vibration buckling of the planar elastic tube bundle are larger than those of the conical spiral tube bundle, while the stress distribution and the comprehensive heat transfer performance of the conical spiral tube bundle are relatively better.
Etournay, Raphaël; Lepelletier, Léa; Boutet de Monvel, Jacques; Michel, Vincent; Cayet, Nadège; Leibovici, Michel; Weil, Dominique; Foucher, Isabelle; Hardelin, Jean-Pierre; Petit, Christine
2010-04-01
Epithelial cells acquire diverse shapes relating to their different functions. This is particularly relevant for the cochlear outer hair cells (OHCs), whose apical and basolateral shapes accommodate the functioning of these cells as mechano-electrical and electromechanical transducers, respectively. We uncovered a circumferential shape transition of the apical junctional complex (AJC) of OHCs, which occurs during the early postnatal period in the mouse, prior to hearing onset. Geometric analysis of the OHC apical circumference using immunostaining of the AJC protein ZO1 and Fourier-interpolated contour detection characterizes this transition as a switch from a rounded-hexagon to a non-convex circumference delineating two lateral lobes at the neural side of the cell, with a negative curvature in between. This shape tightly correlates with the 'V'-configuration of the OHC hair bundle, the apical mechanosensitive organelle that converts sound-evoked vibrations into variations in cell membrane potential. The OHC apical circumference remodeling failed or was incomplete in all the mouse mutants affected in hair bundle morphogenesis that we tested. During the normal shape transition, myosin VIIa and myosin II (A and B isoforms) displayed polarized redistributions into and out of the developing lobes, respectively, while Shroom2 and F-actin transiently accumulated in the lobes. Defects in these redistributions were observed in the mutants, paralleling their apical circumference abnormalities. Our results point to a pivotal role for actomyosin cytoskeleton tensions in the reshaping of the OHC apical circumference. We propose that this remodeling contributes to optimize the mechanical coupling between the basal and apical poles of mature OHCs.
Damiani, Elisa; Donati, Abele; Serafini, Giulia; Rinaldi, Laura; Adrario, Erica; Pelaia, Paolo; Busani, Stefano; Girardis, Massimo
2015-01-01
Background Several reports suggest that implementation of the Surviving Sepsis Campaign (SSC) guidelines is associated with mortality reduction in sepsis. However, adherence to the guideline-based resuscitation and management sepsis bundles is still poor. Objective To perform a systematic review of studies evaluating the impact of performance improvement programs on compliance with Surviving Sepsis Campaign (SSC) guideline-based bundles and/or mortality. Data Sources Medline (PubMed), Scopus and Intercollegiate Studies Institute Web of Knowledge databases from 2004 (first publication of the SSC guidelines) to October 2014. Study Selection Studies on adult patients with sepsis, severe sepsis or septic shock that evaluated changes in compliance to individual/combined bundle targets and/or mortality following the implementation of performance improvement programs. Interventions may consist of educational programs, process changes or both. Data Extraction Data from the included studies were extracted independently by two authors. Unadjusted binary data were collected in order to calculate odds ratios (OR) for compliance to individual/combined bundle targets. Adjusted (if available) or unadjusted data of mortality were collected. Random-effects models were used for the data synthesis. Results Fifty observational studies were selected. Despite high inconsistency across studies, performance improvement programs were associated with increased compliance with the complete 6-hour bundle (OR = 4.12 [95% confidence interval 2.95-5.76], I2 = 87.72%, k = 25, N = 50,081) and the complete 24-hour bundle (OR = 2.57 [1.74-3.77], I2 = 85.22%, k = 11, N = 45,846) and with a reduction in mortality (OR = 0.66 [0.61-0.72], I2 = 87.93%, k = 48, N = 434,447). Funnel plots showed asymmetry. Conclusions Performance improvement programs are associated with increased adherence to resuscitation and management sepsis bundles and with reduced mortality in patients with sepsis, severe sepsis or
Early Results of Anatomic Double Bundle Anterior Cruciate Ligament Reconstruction
Demet Pepele
2014-03-01
Full Text Available Aim: The goal in anterior cruciate ligament reconstruction (ACLR is to restore the normal anatomic structure and function of the knee. In the significant proportion of patients after the traditional single-bundle ACLR, complaints of instability still continue. Anatomic double bundle ACLR may provide normal kinematics in knees, much closer to the natural anatomy. The aim of this study is to clinically assess the early outcomes of our anatomical double bundle ACLR. Material and Method: In our clinic between June 2009 and March 2010, performed the anatomic double bundle ACLR with autogenous hamstring grafts 20 patients were evaluated prospectively with Cincinnati, IKDC and Lysholm scores and in clinically for muscle strength and with Cybex II dynamometer. Results: The mean follow-up is 17.8 months (13-21 months. Patients%u2019 scores of Cincinnati, IKDC and Lysholm were respectively, preoperative 18.1, 39.3 and 39.8, while the post-op increased to 27.2, 76.3 and 86.3. In their last check, 17 percent of the patients according to IKDC scores (85% A (excellent and B (good group and 3 patients took place as C (adequate group. The power measurements of quadriceps and hamstring muscle groups of patients who underwent surgery showed no significant difference compared with the intact knees. Discussion: Double-bundle ACL reconstruction is a satisfactory method. There is a need comparative, long-term studies in large numbers in order to determine improving clinical outcome, preventing degeneration and restoring the knee biomechanics better.
Infinitesimal moduli of G2 holonomy manifolds with instanton bundles
de la Ossa, Xenia; Larfors, Magdalena; Svanes, Eirik E.
2016-11-01
We describe the infinitesimal moduli space of pairs ( Y, V) where Y is a manifold with G 2 holonomy, and V is a vector bundle on Y with an instanton connection. These structures arise in connection to the moduli space of heterotic string compactifications on compact and non-compact seven dimensional spaces, e.g. domain walls. Employing the canonical G 2 cohomology developed by Reyes-Carrión and Fernández and Ugarte, we show that the moduli space decomposes into the sum of the bundle moduli {H}_{{overset{ěe }{d}}_A}^1(Y,End(V)) plus the moduli of the G 2 structure preserving the instanton condition. The latter piece is contained in {H}_{overset{ěe }{d}θ}^1(Y,TY) , and is given by the kernel of a map overset{ěe }{F} which generalises the concept of the Atiyah map for holomorphic bundles on complex manifolds to the case at hand. In fact, the map overset{ěe }{F} is given in terms of the curvature of the bundle and maps {H}_{overset{ěe }{d}θ}^1(Y,TY) into {H}_{{overset{ěe }{d}}_A}^2(Y,End(V)) , and moreover can be used to define a cohomology on an extension bundle of TY by End( V). We comment further on the resemblance with the holomorphic Atiyah algebroid and connect the story to physics, in particular to heterotic compactifications on ( Y, V) when α' = 0.
On the maturation rate of the neutrophil.
Zajicek, G; Shohat, M; Polliack, A
1984-05-01
Fifty-three maturing bone marrow cells of the granulocyte cell series stained with Giemsa stain and magnified 1,000 times were scanned by a "computerized microscope" consisting of a LSI-11/23 microprocessor and a black-and-white video camera attached to a "frame grabber ." Each sampled cell was digitized into 70 X 70 pixels, each pixel representing 0.04 micron of the real image. The pixel gray values ranged between 0 and 255. Zero stood for white, 255 represented black, while the numbers in between stood for the various shades of gray. The cells represented six different stages of granulocytic maturation: myeloblast, promyelocyte, myelocyte, metamyelocyte , band form, and polymorphonuclear granulocyte. A discriminant analysis program selected 19 features best distinguishing between the six different cell types and computed five canonical discriminant functions defining a Space in which maturation was studied. In the Space, distance between two cells serves as a measure of similarity. The closer two cells are, the more similar they are and vice versa. This measure was applied here to express the degree of similarity between the neutrophil maturation classes, and since they represent states in the neutrophil life history, it is applicable also as a yardstick for the quantitation of differentiation. In the Space, the life history of a cell is represented by a trajectory originating in the myeloblast and terminating in the granulocyte state. Displacement along the trajectory represents cell maturation that is expressed relatively to the least differentiated state of the myeloblast. The further a cell from this state the more mature it is. The same yardstick also serves for differentiation rate estimates represented in the Space by displacement velocities that are derived from the known "transit times" of a cell in each state. The methodology is also applied for cell production estimates. Unlike other "computerized microscopes" serving for cell classification, the
SiPM-PET with a short optical fiber bundle for simultaneous PET-MR imaging.
Hong, Seong Jong; Kang, Han Gyoo; Ko, Guen Bae; Song, In Chan; Rhee, June-Tak; Lee, Jae Sung
2012-06-21
For positron emission tomography (PET) inserts to magnetic resonance imaging (MRI) applications, optical fibers have been used for some time to transfer scintillation photons to photomultiplier tubes positioned outside the fringe magnetic field. We previously proposed a novel utilization of an optical fiber for good radio frequency (RF) transmission from body coils to an imaging object. Optical fiber bundles between silicon photomultipliers (SiPM) and scintillation crystals provide an increased spacing between RF-shielded electronics boxes, facilitating RF passage from the body RF coils to imaging objects. In this paper, we present test results of a SiPM-PET system with a short optical fiber bundle for simultaneous PET-MR imaging. We built the SiPM-PET system which consisted of 12 SiPM-PET modules; each module was assembled with a lutetium yttrium oxyorthosilicatecrystal block, a 31 mm optical fiber bundle, a Hamamatsu multi-pixel photon counter S11064-050P and a signal processing box shielded with copper. The SiPM-PET system, with a face-to-face distance of 71 mm, was placed inside a 3 T MRI. A small surface coil placed inside the SiPM-PET system was used to receive the signal from phantoms while the body RF coil transmitted the RF pulses. The SiPM-PET system showed little performance degradation during the simultaneous PET-MR imaging and it caused no significant degradation of MR images with turbo spin echo (TSE), gradient echo or 3D spoiled gradient recalled sequences. Echo planar imaging MR images with and without the SiPM-PET inside the MR scanner were significantly worse than the images obtained with the TSE sequence.
The impact of a patient education bundle on neurosurgery patient satisfaction
Tamara Kliot
2015-01-01
Full Text Available Background: As reimbursements and hospital/physician performance become ever more reliant on Hospital Consumer Assessment of Health Care Providers and Systems (HCAHPS and other quality metrics, physicians are increasingly incentivized to improve patient satisfaction. Methods: A faculty and resident team at the University of California, San Francisco (UCSF Department of Neurological Surgery developed and implemented a Patient Education Bundle. This consisted of two parts: The first was preoperative expectation letters (designed to inform patients of what to expect before, during, and after their hospitalization for a neurosurgical procedure; the second was a trifold brochure with names, photographs, and specialty/training information about the attending surgeons, resident physicians, and nurse practitioners on the neurosurgical service. We assessed patient satisfaction, as measured by HCAHPS scores and a brief survey tailored to our specific intervention, both before and after our Patient Education Bundle intervention. Results: Prior to our intervention, 74.6% of patients responded that the MD always explained information in a way that was easy to understand. After our intervention, 78.7% of patients responded that the MD always explained information in a way that was easy to understand. "Neurosurgery Patient Satisfaction survey" results showed that 83% remembered receiving the preoperative letter; of those received the letter, 93% found the letter helpful; and 100% thought that the letter should be continued. Conclusion: Although effects were modest, we believe that patient education strategies, as modeled in our bundle, can improve patients′ hospital experiences and have a positive impact on physician performance scores and hospital ratings.
Lesson Eighteen An Unusual Bundle Branch Block
鲁端; 王劲
2006-01-01
@@ The electrocardiographic(Fig. 1) has been recorded from an asymptomatic 52-year-old woman free from organic heart disease,who was admitted to the outpatient department beacause a routine ECG had pointed out some abnormalities1: ①The QRS axis is at +90°, ②The QRS duration is 0.14 seconds, ③ The QRS configuration in the limb leads is suggestive of BBB, but it is hard to define, on the basis of these leads only, which type of BBB (right or left) is involved2.The wide S waves in leads I and aVL suggest at first glance an RBBB, whereas the QRS morphology in the inferior leads (monophasic R wave with secondary ST-T changes) is more consistent with an LBBB with relative right axis deviation, ④The chest leads further complicate the problem because lead V1 suggests an RBBB, whereas leads V5 and V6 are perfectly consistent with an LBBB, showing a monophasic R wave3, in addition, lead V5 shows ST-segment depression and negative T wave, typical of LBBB. It is worth noting that when the tracing was recorded, the correct placement of precordial electrodes was accurately checked, ⑤ Placement of precordial electrodes of leads V4,V5,and V6 2 intercostals spaces above restores4,in these leads, a QRS configuration suggestive of RBBB:small and relatively wide s waves appear and the T waves become positive.
78 FR 29139 - Medicare Program; Bundled Payments for Care Improvement Model 1 Open Period
2013-05-17
... participation in Model 1 of the Bundled Payments for Care Improvement initiative. DATES: Model 1 of the Bundled Payments for Care Improvement Deadline: Interested organizations must submit a Model 1 Open Period... regarding Model 1 of the Bundled Payments for Care Improvement initiative. For additional information...
Loftus, M J; Hochreiter, L E; McGuire, M F; Valkovic, M M
1983-10-01
This report presents data from the 163-Rod Bundle Blow Blockage Task of the Full-Length Emergency Cooling Heat Transfer Systems Effects and Separate Effects Test Program (FLECHT SEASET). The task consisted of forced and gravity reflooding tests utilizing electrical heater rods with a cosine axial power profile to simulate PWR nuclear core fuel rod arrays. These tests were designed to determine effects of flow blockage and flow bypass on reflooding behavior and to aid in the assessment of computational models in predicting the reflooding behavior of flow blockage in rod bundle arrays.
McCarthy C
2013-11-01
Full Text Available Cormac McCarthy,1 John R Brennan,1 Lindsay Brown,1 Deirdre Donaghy,1 Patricia Jones,1 Rory Whelan,2 Niamh McCormack,3 Ian Callanan,4 John Ryan,2 Timothy J McDonnell1,3 1Department of Respiratory Medicine, St Vincent's University Hospital, Dublin, Ireland; 2Department of Emergency Medicine, St Vincent's University Hospital, Dublin, Ireland; 3Clinical Strategy and Programmes Directorate, Health Service Executive, Dublin, Ireland; 4Department of Audit, St Vincent's University Hospital, Dublin, Ireland Aim: To determine the efficacy and usefulness of a chronic obstructive pulmonary disease (COPD care bundle designed for the initial management of acute exacerbations of COPD and to assess whether it improves quality of care and provides better outcomes. Introduction: The level of care provided in the emergency department (ED for COPD exacerbations varies greatly, and there is a need for a more systematic, consistent, evidence-based quality improvement approach to improve outcomes and costs. Methods: A prospective before and after study was carried out in a university teaching hospital. Fifty consecutive patients were identified in the ED with COPD exacerbations and their management was reviewed. Following the education of ED staff and the implementation of a COPD care bundle, the outcome for 51 consecutive patients was analyzed. This COPD care bundle consisted of ten elements considered essential to the management of COPD exacerbations and was scored 0–10 according to the number of items on the checklist implemented correctly. Results: Following implementation, the mean bundle score out of 10 improved from 4.6 to 7 (P<0.001. There was a significant decrease in the unnecessary use of intravenous corticosteroids from 60% to 32% (P=0.003 and also a marked improvement in the use of oxygen therapy, with appropriate treatment increasing from 76% to 96% (P=0.003. Prophylaxis for venous thromboembolism also improved from 54% to 73% (P=0.054. The 30-day
Modeling non-maturing liabilities
von Feilitzen, Helena
2011-01-01
Non‐maturing liabilities, such as savings accounts, lack both predetermined maturity and reset dates due to the fact that the depositor is free to withdraw funds at any time and that the depository institution is free to change the rate. These attributes complicate the risk management of such products and no standardized solution exists. The problem is important however since non‐maturing liabilities typically make up a considerable part of the funding of a bank. In this report different mode...
Maturational and Non-Maturational Factors in Heritage Language Acquisition
Moon, Ji Hye
2012-01-01
This dissertation aims to understand the maturational and non-maturational aspects of early bilingualism and language attrition in heritage speakers who have acquired their L1 incompletely in childhood. The study highlights the influential role of age and input dynamics in early L1 development, where the timing of reduction in L1 input and the…
Effects of a bundled Antimicrobial Stewardship Program on mortality: a cohort study
Lucas Miyake Okumura
2015-06-01
Full Text Available Objectives: To assess a bundled Antimicrobial Stewardship Program and its effect on mortality. Data:Eight months of clinical electronic medical records and Antimicrobial Stewardship Program registries were used as source of data.Method: This is a historical cohort study conducted in a Brazilian University Hospital. Eligible patients were admitted to general wards or intensive care units and had an antimicrobial therapy prescribed and assessed by different strategies: Bundled Antimicrobial Stewardship Program (bundled intervention consisted of clinical pharmacist chart review, discussion with microbiologist and infectious disease physicians, local education and continuous follow-up or Conventional Antimicrobial Stewardship Program (clinical pharmacist chart review and discussion with infectious disease physician. Primary outcome from this study was 30-day mortality, which was compared between groups, by using Kaplan-Meier survival curve and log-rank test. Other outcomes included Defined Daily Doses per 1000 patient-days and occurrence of resistant bacteria.Results: From 533 patients, 491 were eligible for the study, of which 191 patients were included to Antimicrobial Stewardship Program and 300 to Conventional strategy. In general, they were likely to be male and age was similar in groups (58.9 vs 55.5 years, p= 0.38. Likewise, Charlson Comorbidity Index was not statistically different between groups (2.6 vs 2.7, p= 0.2. Bloodstream site infections were frequently diagnosed in both groups (30.89% vs 26%, p= 0.24. Other less common sites of infections were central nervous system and lungs. The ASP group had higher survival rates (p< 0.01 and the risk difference was 10.8% (95% CI: 2.41-19.14. There were less Defined Daily Doses per 1000 patient-days (417 vs 557.2, p< 0.05 and higher rates of resistant bacteria identified in the ASP group (83% vs 17%.Conclusion: Bundled ASP was the most effective strategy, with reduced mortality and Defined Daily
Zoom lens calibration with zoom- and focus-related intrinsic parameters applied to bundle adjustment
Zheng, Shunyi; Wang, Zheng; Huang, Rongyong
2015-04-01
A zoom lens is more flexible for photogrammetric measurements under diverse environments than a fixed lens. However, challenges in calibration of zoom-lens cameras preclude the wide use of zoom lenses in the field of close-range photogrammetry. Thus, a novel zoom lens calibration method is proposed in this study. In this method, instead of conducting modeling after monofocal calibrations, we summarize the empirical zoom/focus models of intrinsic parameters first and then incorporate these parameters into traditional collinearity equations to construct the fundamental mathematical model, i.e., collinearity equations with zoom- and focus-related intrinsic parameters. Similar to monofocal calibration, images taken at several combinations of zoom and focus settings are processed in a single self-calibration bundle adjustment. In the self-calibration bundle adjustment, three types of unknowns, namely, exterior orientation parameters, unknown space point coordinates, and model coefficients of the intrinsic parameters, are solved simultaneously. Experiments on three different digital cameras with zoom lenses support the feasibility of the proposed method, and their relative accuracies range from 1:4000 to 1:15,100. Furthermore, the nominal focal length written in the exchangeable image file header is found to lack reliability in experiments. Thereafter, the joint influence of zoom lens instability and zoom recording errors is further analyzed quantitatively. The analysis result is consistent with the experimental result and explains the reason why zoom lens calibration can never have the same accuracy as monofocal self-calibration.
Zucchini, R
1994-01-01
Developing on the ideas of R. Stora and coworkers, a formulation of two dimensional field theory endowed with extended conformal symmetry is given, which is based on deformation theory of holomorphic and Hermitian spaces. The geometric background consists of a vector bundle $E$ over a closed surface $\\Sigma$ endowed with a holomorphic structure and a Hermitian structure subordinated to it. The symmetry group is the semidirect product of the automorphism group ${\\rm Aut}(E)$ of $E$ and the extended Weyl group ${\\rm Weyl}(E)$ of $E$ and acts on the holomorphic and Hermitian structures. The extended Weyl anomaly can be shifted into an automorphism chirally split anomaly by adding to the action a local counterterm, as in ordinary conformal field theory. The dependence on the scale of the metric on the fiber of $E$ is encoded in the Donaldson action, a vector bundle generalization of the Liouville action. The Weyl and automorphism anomaly split into two contributions corresponding respectively to the determinant a...
Catastrophic Failure and Critical Scaling Laws of Fiber Bundle Material
Shengwang Hao
2017-05-01
Full Text Available This paper presents a spring-fiber bundle model used to describe the failure process induced by energy release in heterogeneous materials. The conditions that induce catastrophic failure are determined by geometric conditions and energy equilibrium. It is revealed that the relative rates of deformation of, and damage to the fiber bundle with respect to the boundary controlling displacement ε0 exhibit universal power law behavior near the catastrophic point, with a critical exponent of −1/2. The proportion of the rate of response with respect to acceleration exhibits a linear relationship with increasing displacement in the vicinity of the catastrophic point. This allows for the prediction of catastrophic failure immediately prior to failure by extrapolating the trajectory of this relationship as it asymptotes to zero. Monte Carlo simulations are completed and these two critical scaling laws are confirmed.
Infinitesimal moduli of G2 holonomy manifolds with instanton bundles
de la Ossa, Xenia; Svanes, Eirik Eik
2016-01-01
We describe the infinitesimal moduli space of pairs $(Y, V)$ where $Y$ is a manifold with $G_2$ holonomy, and $V$ is a vector bundle on $Y$ with an instanton connection. These structures arise in connection to the moduli space of heterotic string compactifications on compact and non-compact seven dimensional spaces, e.g. domain walls. Employing the canonical $G_2$ cohomology $H^*_{{\\check{\\rm d}}_E}(Y,E)$ developed by Reyes-Carri\\'on and Fern\\'andez and Ugarte, we show that the moduli space decomposes into the sum of the bundle moduli $H^1_{{\\check{\\rm d}}_A}(Y,{\\rm End}(V))$ plus the moduli of the $G_2$ structure preserving the instanton condition. The latter piece is contained in $H^1_{{\\check{\\rm d}}_\
The special linear version of the projective bundle theorem
Ananyevskiy, Alexey
2012-01-01
A special linear Grassmann variety SGr(k,n) is the complement to the zero section of the determinant of the tautological vector bundle over Gr(k,n). For a representable ring cohomology theory A(-) with a special linear orientation and invertible stable Hopf map \\eta, including Witt groups and MSL[\\eta^{-1}], we have A(SGr(2,2n+1))=A(pt)[e]/(e^{2n}), and A(SGr(2,2n)) is a truncated polynomial algebra in two variables over A(pt). A splitting principle for such theories is established. We use the computations for the special linear Grassmann varieties to calculate A(BSL_n) in terms of the homogeneous power series in certain characteristic classes of the tautological bundle.
Bohr--Sommerfeld Lagrangians of moduli spaces of Higgs bundles
Biswas, Indranil; Gammelgaard, Niels Leth; Logares, Marina
Let $X$ be a compact connected Riemann surface of genus at least two. Let $M_H(r,d)$ denote the moduli space of semistable Higgs bundles on $X$ of rank $r$ and degree $d$. We prove that the compact complex Bohr-Sommerfeld Lagrangians of $M_H(r,d)$ are precisely the irreducible components of the n......Let $X$ be a compact connected Riemann surface of genus at least two. Let $M_H(r,d)$ denote the moduli space of semistable Higgs bundles on $X$ of rank $r$ and degree $d$. We prove that the compact complex Bohr-Sommerfeld Lagrangians of $M_H(r,d)$ are precisely the irreducible components...
Analyses of bundle experiment data using MATRA-h
Lim, In Cheol; Chea, Hee Taek [Korea Atomic Energy Research Institute, Taejon (Korea)
1998-06-01
When the construction and operation license for HANARO was renewed in 1995, 25% of CHF penalty was imposed. The reason for this was that the validation work related to the CHF design calculation was not enough for the assurance of CHF margin. As a part of the works to recover this CHF penalty, MATRA-h was developed by implementing the new correlations for the heat transfer, CHF prediction, subcooled void to the MATRA-a, which is the modified version of COBRA-IV-I done by KAERI. Using MATRA-h, the subchannel analyses for the bundle experiment data were performed. The comparison of the code predictions with the experimental results, it was found that the code would give the conservative predictions as far as the CHF in the bundle geometry is concerned. (author). 12 refs., 25 figs., 16 tabs.
Giambelli-type formula for subbundles of the tangent bundle
Kazarian, M E
1996-01-01
Let us consider a generic $n$-dimensional subbundle $\\CV$ of the tangent bundle $TM$ on some given manifold $M$. Given $\\CV$ one can define different degeneracy loci $\\Si_{\\bold r}(\\CV),\\;\\bold r=(r_1\\leq r_2\\leq r_3 dimension of the subspace $\\CV^j(x)\\subset TM(x)$ spanned by all length $\\leq j$ commutators of vector fields tangent to $\\CV$ at $x$ is less than or equal to $r_j$. We calculate 'explicitly' the cohomology classes dual to $\\Si_{\\bold r}(\\CV)$ using determinantal formulas due to W.~Fulton and the expression for the Chern classes of the associated bundle of free Lie algebras in terms of the Chern classes of $\\CV$.
Implementing strategic bundles for infection prevention and management.
Kaier, K; Wilson, C; Hulscher, M; Wollersheim, H; Huis, A; Borg, M; Scicluna, E; Lambert, M-L; Palomar, M; Tacconelli, E; De Angelis, G; Schumacher, M; Wolkewitz, M; Kleissle, E-M; Frank, U
2012-04-01
Healthcare-associated infections (HAI) are considered to be the most frequent adverse event in healthcare delivery. Active efforts to curb HAI have increased across Europe thanks to the growing emphasis on patient safety and quality of care. Recently, there has been dramatic success in improving the quality of patient care by focusing on the implementation of a group or "bundle" of evidenced-based preventive practices to achieve a better outcome than when implemented individually. The project entitled IMPLEMENT is designed to spread and test knowledge on how to implement strategic bundles for infection prevention and management in a diverse sample of European hospitals. The general goal of this project is to provide evidence on how to decrease the incidence of HAI and to improve antibiotic use under routine conditions.
Through silicon vias filled with planarized carbon nanotube bundles.
Wang, Teng; Jeppson, Kjell; Olofsson, Niklas; Campbell, Eleanor E B; Liu, Johan
2009-12-02
The feasibility of using carbon nanotube (CNT) bundles as the fillers of through silicon vias (TSVs) has been demonstrated. CNT bundles are synthesized directly inside TSVs by thermal chemical vapor deposition (TCVD). The growth of CNTs in vias is found to be highly dependent on the geometric dimensions and arrangement patterns of the vias at atmospheric pressure. The CNT-Si structure is planarized by a combined lapping and polishing process to achieve both a high removal rate and a fine surface finish. Electrical tests of the CNT TSVs have been performed and their electrical resistance was found to be in the few hundred ohms range. The reasons for the high electrical resistance have been discussed and possible methods to decrease the electrical resistance have been proposed.
Pressure effects on single wall carbon nanotube bundles
Teredesai, P.V. [Indian Inst. of Science, Bangalore (India). Dept. of Physics; Sood, A.K. [Indian Inst. of Science, Bangalore (India). Dept. of Physics; Chemistry and Physics of Materials Unit, Jawaharlal Nehru Center for Advanced Scientific Research, Jakkur Campus, Jakkur (India); Sharma, S.M.; Karmakar, S.; Sikka, S.K. [High Pressure Physics Div., Bhabha Atomic Research Center, Mumbai (India); Govindaraj, A.; Rao, C.N.R. [Chemistry and Physics of Materials Unit, Jawaharlal Nehru Center for Advanced Scientific Research, Jakkur Campus, Jakkur (India)
2001-01-01
We report high pressure Raman studies on single wall carbon nanotube bundles under hydrostatic conditions using two different pressure transmitting media, alcohol mixture and pure water. The radial and tangential modes show a blue shift when SWNT bundle is immersed in the liquids at ambient pressures. The pressure dependence of the radial modes is the same in both liquids. However, the pressure derivatives d{omega}/dP of the tangential modes are slightly higher for the water medium. Raman results are compared with studies under non-hydrostatic conditions and with recent high-pressure X-ray studies. It is seen that the mode frequencies of the recovered sample after pressure cycling from 26 GPa are downshifted by {proportional_to}7-10 cm{sup -1} as compared to the starting sample. (orig.)
Bundle adjustment with raw inertial observations in UAV applications
Cucci, Davide Antonio; Rehak, Martin; Skaloud, Jan
2017-08-01
It is well known that accurate aerial position and attitude control is beneficial for image orientation in airborne photogrammetry. The aerial control is traditionally obtained by Kalman filtering/smoothing inertial and GNSS observations prior to the bundle-adjustment. However, in Micro Aerial Vehicles this process may result in poor attitude determination due to the limited quality of the inertial sensors, large alignment uncertainty and residual correlations between sensor biases and initial attitude. We propose to include the raw inertial observations directly into the bundle-adjustment instead of as position and attitude weighted observations from a separate inertial/GNSS fusion step. The necessary observation models are derived in detail within the context of the so called ;Dynamic Networks;. We examine different real world cases and we show that the proposed approach is superior to the established processing pipeline in challenging scenarios such as mapping in corridors and in areas where the reception of GNSS signals is denied.
An improved partial bundle method for linearly constrained minimax problems
Chunming Tang
2016-02-01
Full Text Available In this paper, we propose an improved partial bundle method for solving linearly constrained minimax problems. In order to reduce the number of component function evaluations, we utilize a partial cutting-planes model to substitute for the traditional one. At each iteration, only one quadratic programming subproblem needs to be solved to obtain a new trial point. An improved descent test criterion is introduced to simplify the algorithm. The method produces a sequence of feasible trial points, and ensures that the objective function is monotonically decreasing on the sequence of stability centers. Global convergence of the algorithm is established. Moreover, we utilize the subgradient aggregation strategy to control the size of the bundle and therefore overcome the difficulty of computation and storage. Finally, some preliminary numerical results show that the proposed method is effective.
Curved Space-Times by Crystallization of Liquid Fiber Bundles
Hélein, Frédéric; Vey, Dimitri
2017-01-01
Motivated by the search for a Hamiltonian formulation of Einstein equations of gravity which depends in a minimal way on choices of coordinates, nor on a choice of gauge, we develop a multisymplectic formulation on the total space of the principal bundle of orthonormal frames on the 4-dimensional space-time. This leads quite naturally to a new theory which takes place on 10-dimensional manifolds. The fields are pairs of ((α ,ω ),π), where (α ,ω ) is a 1-form with coefficients in the Lie algebra of the Poincaré group and π is an 8-form with coefficients in the dual of this Lie algebra. The dynamical equations derive from a simple variational principle and imply that the 10-dimensional manifold looks locally like the total space of a fiber bundle over a 4-dimensional base manifold. Moreover this base manifold inherits a metric and a connection which are solutions of a system of Einstein-Cartan equations.
Frobenius Pull Backs of Vector Bundles in Higher Dimensions
V Trivedi
2012-11-01
We prove that for a smooth projective variety of arbitrary dimension and for a vector bundle over , the Harder–Narasimhan filtration of a Frobenius pull back of is a refinement of the Frobenius pull back of the Harder–Narasimhan filtration of , provided there is a lower bound on the characteristic (in terms of rank of and the slope of the destabilizing sheaf of the cotangent bundle of ). We also recall some examples, due to Raynaud and Monsky, to show that some lower bound on is necessary. We also give a bound on the instability degree of the Frobenius pull back of in terms of the instability degree of and well defined invariants of .
Wu, Jing; Wang, Heng; Guo, Xuan; Chen, Jiong
2016-08-15
The actin bundle is an array of linear actin filaments cross-linked by actin-bundling proteins, but its assembly and dynamics are not as well understood as those of the branched actin network. Here we used the Drosophila bristle as a model system to study actin bundle formation. We found that cofilin, a major actin disassembly factor of the branched actin network, promotes the formation and positioning of actin bundles in the developing bristles. Loss of function of cofilin or AIP1, a cofactor of cofilin, each resulted in increased F-actin levels and severe defects in actin bundle organization, with the defects from cofilin deficiency being more severe. Further analyses revealed that cofilin likely regulates actin bundle formation and positioning by the following means. First, cofilin promotes a large G-actin pool both locally and globally, likely ensuring rapid actin polymerization for bundle initiation and growth. Second, cofilin limits the size of a nonbundled actin-myosin network to regulate the positioning of actin bundles. Third, cofilin prevents incorrect assembly of branched and myosin-associated actin filament into bundles. Together these results demonstrate that the interaction between the dynamic dendritic actin network and the assembling actin bundles is critical for actin bundle formation and needs to be closely regulated.
HYDRODISSECTION FOR PRESERVATION OF NEUROVASCULAR BUNDLE DURING RADICAL PROSTATECTOMY
H. S. Gevorgyan
2016-01-01
Full Text Available Nerve-sparing radical prostatectomy is one of the high-tech operations in urology, and the challenge of the surgeon is not only to remove the prostate tumor, but also to provide a high quality of life. The fact that most questions devoted from patients in a conversation with the surgeon before the operation are devoted to this issue, shows the importance and relevance. At present, the diagnostic methods allow significantly more likely to detect early prostate cancer, making finding and treatment of these patients more affordable and allows to apply this operation.Lately, it seems urgent to explore the possibility of water jet dissection in the field of urology, in particular, for nerve-sparing prostatectomy. Preservation of erectile function depends largely on the quality of separating the neurovascular bundle. Standard use of electrocautery is associated with damage to the neurovascular bundle. When performing operations using water-jet mobilization of prostate the selective dissection of tissue is performed. This avoids injury of neurovascular bundle and further postoperative complications. The use of this technique may allow the surgeon to provide a more accurate mobilization prostate and selectively controlled intersection vessels heading to the prostate from the neurovascular bundle, reduce intraoperative blood loss, maintaining continence, erectile function.This literature review is considered by the experience of using nerve-sparing radical prostatectomy using a water-jet dissector, estimated intraoperative parameters using this method.However, we have the lack of extensive research capabilities of this technique when performing nerve-preserving radical prostatectomy, that does not allow to make a comprehensive presentation on the benefits of this technique and its effects on erectile function and quality of urination, further study of this issue in such a difficult category of patients.
A review on saturated boiling of liquids on tube bundles
Swain, Abhilas; Das, Mihir Kumar
2014-05-01
A review of recent investigation on boiling of saturated liquids over plain and enhanced tube bundles has been carried out taking the earlier review works as reference point. The experimental observations of various geometry and performance parameters studied by researchers are analyzed keeping current demand of industries in design and development of compact, efficient heat exchanging devices. The study shows that tube spacing plays an important role in determination of compactness of the heat exchanger.
Input modelling for subchannel analysis of CANFLEX fuel bundle
Park, Joo Hwan; Jun, Ji Su; Suk, Ho Chun [Korea Atomic Energy Research Institute, Taejon (Korea)
1998-06-01
This report describs the input modelling for subchannel analysis of CANFLEX fuel bundle using CASS(Candu thermalhydraulic Analysis by Subchannel approacheS) code which has been developed for subchannel analysis of CANDU fuel channel. CASS code can give the different calculation results according to users' input modelling. Hence, the objective of this report provide the background information of input modelling, the accuracy of input data and gives the confidence of calculation results. (author). 11 refs., 3 figs., 4 tabs.
Prostaglandins temporally regulate cytoplasmic actin bundle formation during Drosophila oogenesis
Spracklen, Andrew J.; Kelpsch, Daniel J.; Chen, Xiang; Spracklen, Cassandra N.; Tootle, Tina L.
2014-01-01
Prostaglandins (PGs)—lipid signals produced downstream of cyclooxygenase (COX) enzymes—regulate actin dynamics in cell culture and platelets, but their roles during development are largely unknown. Here we define a new role for Pxt, the Drosophila COX-like enzyme, in regulating the actin cytoskeleton—temporal restriction of actin remodeling during oogenesis. PGs are required for actin filament bundle formation during stage 10B (S10B). In addition, loss of Pxt results in extensive early actin ...
ETA INVARIANTS, DIFFERENTIAL CHARACTERS AND FLAT VECTOR BUNDLES
J.M.BISMUT
2005-01-01
The purpose of this paper is to give a refinement of the Atiyah-Singer families index theorem at the level of differential characters. Also a Riemann-Roch-Grothendieck theorem for the direct image of flat vector bundles by proper submersions is proved,with Chern classes with coefficients in C/Q. These results are much related to prior work of Gillet-Soule, Bismut-Lott and Lott.
Double bundle posterior cruciate ligament reconstruction: surgical technique and results.
Fanelli, Gregory C; Beck, John D; Edson, Craig J
2010-12-01
The keys to successful posterior cruciate ligament reconstruction are to identify and treat all pathology, use strong graft material, accurately place tunnels in anatomic insertion sites, minimize graft bending, use a mechanical graft tensioning device, use primary and back-up graft fixation, and use the appropriate postoperative rehabilitation program. Adherence to these technical principles results in successful single and double-bundle arthroscopic transtibial tunnel posterior cruciate ligament reconstruction based upon stress radiography, arthrometer, knee ligament rating scales, and patient satisfaction measurements.
Image processing for cameras with fiber bundle image relay.
Olivas, Stephen J; Arianpour, Ashkan; Stamenov, Igor; Morrison, Rick; Stack, Ron A; Johnson, Adam R; Agurok, Ilya P; Ford, Joseph E
2015-02-10
Some high-performance imaging systems generate a curved focal surface and so are incompatible with focal plane arrays fabricated by conventional silicon processing. One example is a monocentric lens, which forms a wide field-of-view high-resolution spherical image with a radius equal to the focal length. Optical fiber bundles have been used to couple between this focal surface and planar image sensors. However, such fiber-coupled imaging systems suffer from artifacts due to image sampling and incoherent light transfer by the fiber bundle as well as resampling by the focal plane, resulting in a fixed obscuration pattern. Here, we describe digital image processing techniques to improve image quality in a compact 126° field-of-view, 30 megapixel panoramic imager, where a 12 mm focal length F/1.35 lens made of concentric glass surfaces forms a spherical image surface, which is fiber-coupled to six discrete CMOS focal planes. We characterize the locally space-variant system impulse response at various stages: monocentric lens image formation onto the 2.5 μm pitch fiber bundle, image transfer by the fiber bundle, and sensing by a 1.75 μm pitch backside illuminated color focal plane. We demonstrate methods to mitigate moiré artifacts and local obscuration, correct for sphere to plane mapping distortion and vignetting, and stitch together the image data from discrete sensors into a single panorama. We compare processed images from the prototype to those taken with a 10× larger commercial camera with comparable field-of-view and light collection.
The Business of Bundling: Joining Forces on Joint Replacement.
Kaldy, Joanne
2016-03-01
A mandated bundled-payment program for joint replacement is in place in several regions across the country, and practitioners such as pharmacists are still sorting out their roles in this federal initiative. To get involved, pharmacists need to establish connections with area hospitals and physician groups to promote and document their ability to manage medications, reduce and eliminate medication-related problems and rehospitalizations, and work with patients to maximize adherence and improve communication for those undergoing hip and knee replacement.
Cerebrocerebellar system and Arnold's bundle: A tractographic study: preliminary results
Eliasz Engelhardt
Full Text Available Abstract The cerebellum, traditionally considered a structure involved in balance and movement control, was more recently recognized as important in cognitive, emotional and behavioral functions. These functions appear to be related to the more recent parts of the cerebellum that belong to the cerebrocerebellar system. One of the key segments of this system is the (prefronto-[penduncule]-pontine projection that represents the Arnold's bundle. Diffusion tensor imaging and tractography (DTI-TR has permitted in vivo virtual dissection of white matter tracts, including those of the cerebellar. Objective: To study the fronto-[peduncule]-pontine projection (Arnold's bundle, with DTI-TR. Methods: Ten normal subjects were included (mean age 30 years. Standard acquisitions in three planes were obtained with a 1.5T GE Signa Horizon scanner, complemented with DTI acquisitions. Post-processing and analysis was performed using an ADW 4.3 workstation running Functool 4.5.3 (GE Medical Systems. A single ROI was placed on the medial third of the cerebral peduncle base, considered the site of convergence of the fibers of Arnold's bundle, bilaterally. Results: Twenty tractograms were obtained. All were constituted by a significant number of fibers in correspondence to the frontal lobe, and part of them anterior to the coronal plane at the anterior commissure, which characterizes them as associated to the prefrontal region. Conclusions: For the first time, frontal lobe related projections were systematically revealed with DTI-TR seeded from cerebral peduncle base ROIs. They showed anatomic coherence with Arnold's bundle, which includes the prefrontopontine segment of the cortico-ponto-cerebellar path, one of the components of the cerebrocerebellar system, acknowledged as fundamental for non-motor functions such as cognition, emotion and behavior.
Topological Aharonov-Bohm Effect and Pseudo-Particle Bundles
Payandeh, Farrin
2016-10-01
Exploiting a topological approach, we discuss the outstanding Aharonov-Bohm effect and try to explain it in the context of the principal P(M, U(1)) bundle. We show that this could be done by excluding a specific region from the main manifold which acts as the solenoid around which the effect is observed. Moreover, we discuss the impacts of pseudo-particles in this topological approach.
Analysis of Subchannel and Rod Bundle PSBT Experiments with CATHARE 3
M. Valette
2012-01-01
Full Text Available This paper presents the assessment of CATHARE 3 against PWR subchannel and rod bundle tests of the PSBT benchmark. Noticeable measurements were the following: void fraction in single subchannel and rod bundle, multiple liquid temperatures at subchannel exit in rod bundle, and DNB power and location in rod bundle. All these results were obtained both in steady and transient conditions. Void fraction values are satisfactory predicted by CATHARE 3 in single subchannels with the pipe module. More dispersed predictions of void values are obtained in rod bundles with the CATHARE 3 3D module at subchannel scale. Single-phase liquid mixing tests and DNB tests in rod bundle are also analyzed. After calibrating the mixing in liquid single phase with specific tests, DNB tests using void mixing give mitigated results, perhaps linked to inappropriate use of CHF lookup tables in such rod bundles with many spacers.
Bagger-Witten line bundles on moduli spaces of elliptic curves
Gu, W
2016-01-01
In this paper we discuss Bagger-Witten line bundles over moduli spaces of SCFTs. We review how in general they are `fractional' line bundles, not honest line bundles, twisted on triple overlaps. We discuss the special case of moduli spaces of elliptic curves in detail. There, the Bagger-Witten line bundles does not exist as an ordinary line bundle, but rather is necessarily fractional. As a fractional line bundle, it is nontrivial (though torsion) over the uncompactified moduli stack, and its restriction to the interior, excising corners with enhanced stabilizers, is also fractional. We review and compare to results of recent work arguing that well-definedness of the worldsheet metric implies that the Bagger-Witten line bundle is torsion, and give general arguments on the existence of universal structures on moduli spaces of SCFTs, in which superconformal deformation parameters are promoted to nondynamical fields ranging over the SCFT moduli space.
Mass Transport Through Carbon Nanotube-Polystyrene Bundles
Lin, Rongzhou; Tran, Tuan
2016-05-01
Carbon nanotubes have been widely used as test channels to study nanofluidic transport, which has been found to have distinctive properties compared to transport of fluids in macroscopic channels. A long-standing challenge in the study of mass transport through carbon nanotubes (CNTs) is the determination of flow enhancement. Various experimental investigations have been conducted to measure the flow rate through CNTs, mainly based on either vertically aligned CNT membranes or individual CNTs. Here, we proposed an alternative approach that can be used to quantify the mass transport through CNTs. This is a simple method relying on the use of carbon nanotube-polystyrene bundles, which are made of CNTs pulled out from a vertically aligned CNT array and glued together by polystyrene. We experimentally showed by using fluorescent tagging that the composite bundles allowed measureable and selective mass transport through CNTs. This type of composite bundle may be useful in various CNT research areas as they are simple to fabricate, less likely to form macroscopic cracks, and offer a high density of CNT pores while maintaining the aligned morphology of CNTs.
Conservation of helical bundle structure between the exocyst subunits.
Nicole J Croteau
Full Text Available BACKGROUND: The exocyst is a large hetero-octomeric protein complex required for regulating the targeting and fusion of secretory vesicles to the plasma membrane in eukaryotic cells. Although the sequence identity between the eight different exocyst subunits is less than 10%, structures of domains of four of the subunits revealed a similar helical bundle topology. Characterization of several of these subunits has been hindered by lack of soluble protein for biochemical and structural studies. METHODOLOGY/PRINCIPAL FINDINGS: Using advanced hidden Markov models combined with secondary structure predictions, we detect significant sequence similarity between each of the exocyst subunits, indicating that they all contain helical bundle structures. We corroborate these remote homology predictions by identifying and purifying a predicted domain of yeast Sec10p, a previously insoluble exocyst subunit. This domain is soluble and folded with approximately 60% alpha-helicity, in agreement with our predictions, and capable of interacting with several known Sec10p binding partners. CONCLUSIONS/SIGNIFICANCE: Although all eight of the exocyst subunits had been suggested to be composed of similar helical bundles, this has now been validated by our hidden Markov model structure predictions. In addition, these predictions identified protein domains within the exocyst subunits, resulting in creation and characterization of a soluble, folded domain of Sec10p.
Explicit presentations of nonspecial line bundles and secant spaces
Kim, Seonja
2012-01-01
A line bundle L on a smooth curve X is nonspecial if and only if L admits a presentation L=K_X -D +E for some effective divisors D and E>0 on X with gcd (D, E)=0 and h^0 (X, O_X (D))=1. In this work, we define a minimal presentation of L which is minimal with respect to the degree of E among the presentations. If L=K_X -D +E with degE>2 is a minimal, then L is very ample and any q-points of X with q
Real bundle gerbes, orientifolds and twisted KR-homology
Hekmati, Pedram; Szabo, Richard J; Vozzo, Raymond F
2016-01-01
We introduce a notion of Real bundle gerbes on manifolds equipped with an involution. We elucidate their relation to Jandl gerbes and prove that they are classified by their Real Dixmier-Douady class in Grothendieck's equivariant sheaf cohomology. We show that the Grothendieck group of Real bundle gerbe modules is isomorphic to twisted KR-theory for a torsion Real Dixmier-Douady class. Building on the Baum-Douglas model for K-homology and the orientifold construction in string theory, we introduce geometric cycles for twisted KR-homology groups using Real bundle gerbe modules. We prove that this defines a real-oriented generalised homology theory dual to twisted KR-theory for Real closed manifolds, and more generally for Real finite CW-complexes, for any Real Dixmier-Douady class. This is achieved by defining an explicit natural transformation to analytic twisted KR-homology and proving that it is an isomorphism. Our constructions give a new framework for the classification of orientifolds in string theory, p...
An elastic model for bioinspired design of carbon nanotube bundles
Sun, Xiaoyu; Zhang, Zuoqi; Xu, Yuanjie; Zhang, Yongwei
2015-04-01
Collagen fibers provide a good example of making strong micro- or mesoscale fibers from nanoscale tropocollagen molecules through a staggered and cross-linked organization in a bottom-up manner. Mimicking the architectural features of collagen fibers has been shown to be a promising approach to develop carbon nanotube (CNT) fibers of high performance. In the present work, an elastic model is developed to describe the load transfer and failure propagation within the bioinspired CNT bundles, and to establish the relations of the mechanical properties of the bundles with a number of geometrical and physical parameters such as the CNT aspect ratio and longitudinal gap, interface cross-link density, and the functionalization-induced degradation in CNTs, etc. With the model, the stress distributions along the CNT-CNT interface as well as in every individual CNT are well captured, and the failure propagation along the interface and its effects on the mechanical properties of the CNT bundles are predicted. The work may provide useful guidelines for the design of novel CNT fibers in practice.
LUO Hao; AO Ying-fang; ZHANG Wei-guang; LIU Sheng-yong; ZHANG Ji-ying; YU Jia-kuo
2012-01-01
Background Several techniques have been described for posterior cruciate ligament(PCL)reconstruction.However,double-bundle PCL reconstruction using the quadruple bone-tunnel technique has been seldom reported.The current study investigated this technique,focusing on the anatomy of the femoral and tibial insertions of the anterolateral(AL)and posteromedial(PM)bundles of the PCL.Methods Twenty-two fresh,healthy adult cadaveric knees were dissected and measured.The PCL was divided into the AL bundle and PM bundle at the insertion footprint.The insertion footprints of the AL and PM bundles,their location,size,and the clock positions were measured and described.Results On the femur,the clock position of the footprint of the AL bundle was 11:21±0:23(left)or 0:39±0:23(right),and the PM bundle was 9:50±0:18(left)or 2:10±0:18(right),with the knee flexed at 90 degrees.The distances from the center of the femoral insertions of the AL and PM bundles to the anterior cartilage margins of the medial femoral condyle were(7.79±1.22)mm and(8.36±1.63)mm,respectively.On the tibia,the vertical distances from the center of the tibial insertions of the AL and PM bundles to the tibial articular surface were(3.25±1.20)mm and(6.91±1.57)mm,respectively.Conclusions These results have led to a better definition of the anatomy of the AL and PM bundle footprint of the PCL.The technique of double-bundle PCL reconstruction using quadruple bone-tunnel is feasible.Application of these data during PCL reconstruction using the quadruple bone-tunnel technique may help optimize knee stability.
Tomato seeds maturity detection system based on chlorophyll fluorescence
Li, Cuiling; Wang, Xiu; Meng, Zhijun
2016-10-01
Chlorophyll fluorescence intensity can be used as seed maturity and quality evaluation indicator. Chlorophyll fluorescence intensity of seed coats is tested to judge the level of chlorophyll content in seeds, and further to judge the maturity and quality of seeds. This research developed a detection system of tomato seeds maturity based on chlorophyll fluorescence spectrum technology, the system included an excitation light source unit, a fluorescent signal acquisition unit and a data processing unit. The excitation light source unit consisted of two high power LEDs, two radiators and two constant current power supplies, and it was designed to excite chlorophyll fluorescence of tomato seeds. The fluorescent signal acquisition unit was made up of a fluorescence spectrometer, an optical fiber, an optical fiber scaffolds and a narrowband filter. The data processing unit mainly included a computer. Tomato fruits of green ripe stage, discoloration stage, firm ripe stage and full ripe stage were harvested, and their seeds were collected directly. In this research, the developed tomato seeds maturity testing system was used to collect fluorescence spectrums of tomato seeds of different maturities. Principal component analysis (PCA) method was utilized to reduce the dimension of spectral data and extract principal components, and PCA was combined with linear discriminant analysis (LDA) to establish discriminant model of tomato seeds maturity, the discriminant accuracy was greater than 90%. Research results show that using chlorophyll fluorescence spectrum technology is feasible for seeds maturity detection, and the developed tomato seeds maturity testing system has high detection accuracy.
Gipc1 has a dual role in Vangl2 trafficking and hair bundle integrity in the inner ear
Giese, Arnaud P.; Ezan, Jérome; Wang, Lingyan; Lasvaux, Léa; Lembo, Frédérique; Mazzocco, Claire; Richard, Elodie; Reboul, Jérome; Borg, Jean-Paul; Kelley, Matthew W.; Sans, Nathalie; Brigande, John; Montcouquiol, Mireille
2012-01-01
Vangl2 is one of the central proteins controlling the establishment of planar cell polarity in multiple tissues of different species. Previous studies suggest that the localization of the Vangl2 protein to specific intracellular microdomains is crucial for its function. However, the molecular mechanisms that control Vangl2 trafficking within a cell are largely unknown. Here, we identify Gipc1 (GAIP C-terminus interacting protein 1) as a new interactor for Vangl2, and we show that a myosin VI-Gipc1 protein complex can regulate Vangl2 traffic in heterologous cells. Furthermore, we show that in the cochlea of MyoVI mutant mice, Vangl2 presence at the membrane is increased, and that a disruption of Gipc1 function in hair cells leads to maturation defects, including defects in hair bundle orientation and integrity. Finally, stimulated emission depletion microscopy and overexpression of GFP-Vangl2 show an enrichment of Vangl2 on the supporting cell side, adjacent to the proximal membrane of hair cells. Altogether, these results indicate a broad role for Gipc1 in the development of both stereociliary bundles and cell polarization, and suggest that the strong asymmetry of Vangl2 observed in early postnatal cochlear epithelium is mostly a ‘tissue’ polarity readout. PMID:22991442
Miyake, Hiroshi
2016-05-01
C4 plants have evolved >60 times from their C3 ancestors. C4 photosynthesis requires a set of closely co-ordinated anatomical and biochemical characteristics. However, it is now recognized that the evolution of C4 plants requires fewer changes than had ever been considered, because of the genetic, biochemical and anatomical pre-conditions of C3 ancestors that were recruited into C4 photosynthesis. Therefore, the pre-conditions in C3 plants are now being actively investigated to clarify the evolutionary trajectory from C3 to C4 plants and to engineer C4 traits efficiently into C3 crops. In the present mini review, the anatomical characteristics of C3 and C4 plants are briefly reviewed and the importance of the bundle sheath for the evolution of C4 photosynthesis is described. For example, while the bundle sheath of C3 rice plants accumulates large amounts of starch in the developing leaf blade and at the lamina joint of the mature leaf, the starch sheath function is also observed during leaf development in starch accumulator grasses regardless of photosynthetic type. The starch sheath function of C3 plants is therefore also implicated as a possible pre-condition for the evolution of C4 photosynthesis. The phylogenetic relationships between the types of storage carbohydrates and of photosynthesis need to be clarified in the future.
Compactifications of the Heterotic string with unitary bundles
Weigand, T.
2006-05-23
In this thesis we investigate a large new class of four-dimensional supersymmetric string vacua defined as compactifications of the E{sub 8} x E{sub 8} and the SO(32) heterotic string on smooth Calabi-Yau threefolds with unitary gauge bundles and heterotic five-branes. The first part of the thesis discusses the implementation of this idea into the E{sub 8} x E{sub 8} heterotic string. After specifying a large class of group theoretic embeddings featuring unitary bundles, we analyse the effective four-dimensional N=1 supergravity upon compactification. From the gauge invariant Kaehler potential for the moduli fields we derive a modification of the Fayet-Iliopoulos D-terms arising at one-loop in string perturbation theory. From this we conjecture a one-loop deformation of the Hermitian Yang-Mills equation and introduce the idea of {lambda}-stability as the perturbatively correct stability concept generalising the notion of Mumford stability valid at tree-level. We then proceed to a definition of SO(32) heterotic vacua with unitary gauge bundles in the presence of heterotic five-branes and find agreement of the resulting spectrum with the S-dual framework of Type I/Type IIB orientifolds. A similar analysis of the effective four-dimensional supergravity is performed. Further evidence for the proposed one-loop correction to the stability condition is found by identifying the heterotic corrections as the S-dual of the perturbative part of {pi}-stability as the correct stability concept in Type IIB theory. After reviewing the construction of holomorphic stable vector bundles on elliptically fibered Calabi-Yau manifolds via spectral covers, we provide semi-realistic examples for SO(32) heterotic vacua with Pati-Salam and MSSM-like gauge sectors. We finally discuss the construction of realistic vacua with flipped SU(5) GUT and MSSM gauge group within the E{sub 8} x E{sub 8} framework, based on the embedding of line bundles into both E{sub 8} factors. Some of the appealing
Exceptional generalised geometry for massive IIA and consistent reductions
Cassani, Davide; Petrini, Michela; Strickland-Constable, Charles; Waldram, Daniel
2016-01-01
We develop an exceptional generalised geometry formalism for massive type IIA supergravity. In particular, we construct a deformation of the generalised Lie derivative, which generates the type IIA gauge transformations as modified by the Romans mass. We apply this new framework to consistent Kaluza-Klein reductions preserving maximal supersymmetry. We find a generalised parallelisation of the exceptional tangent bundle on S^6, and from this reproduce the consistent truncation ansatz and embedding tensor leading to dyonically gauged ISO(7) supergravity in four dimensions. We also discuss closely related hyperboloid reductions, yielding a dyonic ISO(p,7-p) gauging. Finally, while for vanishing Romans mass we find a generalised parallelisation on S^d, d=4,3,2, leading to a maximally supersymmetric reduction with gauge group SO(d+1) (or larger), we provide evidence that an analogous reduction does not exist in the massive theory.
Exceptional generalised geometry for massive IIA and consistent reductions
Cassani, Davide; de Felice, Oscar; Petrini, Michela; Strickland-Constable, Charles; Waldram, Daniel
2016-08-01
We develop an exceptional generalised geometry formalism for massive type IIA supergravity. In particular, we construct a deformation of the generalised Lie derivative, which generates the type IIA gauge transformations as modified by the Romans mass. We apply this new framework to consistent Kaluza-Klein reductions preserving maximal supersymmetry. We find a generalised parallelisation of the exceptional tangent bundle on S 6, and from this reproduce the consistent truncation ansatz and embedding tensor leading to dyonically gauged ISO(7) supergravity in four dimensions. We also discuss closely related hyperboloid reductions, yielding a dyonic ISO( p, 7 - p) gauging. Finally, while for vanishing Romans mass we find a generalised parallelisation on S d , d = 4 , 3 , 2, leading to a maximally supersymmetric reduction with gauge group SO( d + 1) (or larger), we provide evidence that an analogous reduction does not exist in the massive theory.
Sadoghi, Patrick; Mueller, Peter E.; Jansson, Volkmar; van Griensven, Martin; Kroepfl, Albert; Fischmeister, Martin F.
2011-01-01
The study hypothesis was that the outcome of semitendinosus gracilis double bundle (STG-DB) anterior cruciate ligament (ACL) reconstruction is advantageous in terms of clinical results and restoration of anterior-posterior and rotational laxity in comparison to bone-patellar tendon-bone single-bundl
Reflooding and boil-off experiments in a VVER-440 like rod bundle and analyses with the CATHARE code
Korteniemi, V.; Haapalehto, T. [Lappeenranta Univ. of Technology (Finland); Puustinen, M. [VTT Energy, Lappeenranta (Finland)
1995-09-01
Several experiments were performed with the VEERA facility to simulate reflooding and boil-off phenomena in a VVER-440 like rod bundle. The objective of these experiments was to get experience of a full-scale bundle behavior and to create a database for verification of VVER type core models used with modern thermal-hydraulic codes. The VEERA facility used in the experiments is a scaled-down model of the Russian VVER-440 type pressurized water reactors used in Loviisa, Finland. The test section of the facility consists of one full-scale copy of a VVER-440 reactor rod bundle with 126 full-length electrically heated rod simulators. Bottom and top-down reflooding, different modes of emergency core cooling (ECC) injection and the effect of heating power on the heat-up of the rods was studied. In this paper the results of calculations simulating two reflood and one boil-off experiment with the French CATHARE2 thermal-hydraulic code are also presented. Especially the performance of the recently implemented top-down reflood model of the code was studied.
Transfer-matrix simulations of field emission from bundles of open and closed (5,5) carbon nanotubes
Mayer, A.; Miskovsky, N. M.; Cutler, P. H.; Lambin, Ph.
2003-12-01
We present simulations of field emission from bundles of metallic (5,5) carbon nanotubes, which are either ideally open or closed. The scattering calculations are achieved using a transfer-matrix methodology for consideration of three-dimensional aspects of both the emitting structure and the surface barrier. Band-structure effects are reproduced by using pseudopotentials and enforcing the incident states to first travel through a periodic repetition of the tubes’ basic cell before entering the region containing the fields. The bundles consist of three and six identical structures, which are placed at the corners of equilateral triangles. In all cases, the closed emitters are found to emit less current than the open ones and to be more sensitive to the electric field in their response to neighboring tubes. Due to the enhanced screening of the electric field, the bundles’ emission rates are reduced compared to those of the isolated tubes. It turns out that the rates characterizing bundle and isolated emitters are related by a simple formula, whose dependence on the electric field suggests deviations from the Fowler-Nordheim equation at high fields. Finally, the position of peaks associated with quasilocalized states on top of the closed emitters appears to be a strong indicator of the tubes’ environment.
Johnson, Japera; Bozeman, Barry
2012-11-01
The authors contend that increasing diversity in academic medicine, science, technology, engineering, and mathematics requires the adoption of a systematic approach to retain minority high school and college students as they navigate the scientific pipeline. Such an approach should focus on the interrelated and multilayered challenges that these students face. The authors fuse an alternative conceptualization of the scientific and technical human capital theoretical framework and the theory of social identity contingencies to offer a conceptual model for targeting the critical areas in which minority students may need additional support to continue toward careers in science. Their proposed asset bundles model is grounded in the central premise that making greater progress in recruiting and retaining minorities likely requires institutions to respond simultaneously to various social cues that signal devaluation of certain identities (e.g., gender, race, socioeconomic status). The authors define "asset bundles" as the specific sets of abilities and resources individuals develop that help them succeed in educational and professional tasks, including but not limited to science and research. The model consists of five asset bundles, each of which is supported in the research literature as a factor relevant to educational achievement and, the authors contend, may lead to improved and sustained diversity: educational endowments, science socialization, network development, family expectations, and material resources. Using this framework, they suggest possible ways of thinking about the task of achieving diversity as well as guideposts for next steps. Finally, they discuss the feasibility of implementing such an approach.
Dean, Shannon M.; Eickhoff, Jens C.; Bakel, Leigh Anne
2015-01-01
Providers nationally have observed a decline in the quality of documentation after implementing EHRs. In this pilot study, we examined the effectiveness of an intervention bundle designed to improve resident progress notes written in an EHR and to establish the reliability of an audit tool used to evaluate notes. The bundle consisted of establishing note-writing guidelines, developing an aligned note template, and educating interns about the guidelines and using the template. Twenty-five progress notes written by pediatric interns before and after this intervention were examined using an audit tool. Reliability of the tool was evaluated using the intra-class correlation coefficient (ICC). The total score of the audit tool was summarized in terms of means and standard deviation. Individual item responses were summarized using percentages and compared between the pre- and post-intervention assessment using Fisher’s exact test. The ICC for the audit tool was 0.96 (95% CI: 0.91–0.98). A significant improvement in the total note score and in questions related to note clutter was seen. No significant improvement was seen for questions related to copy-paste. The study suggests that an intervention bundle can lead to some improvements in note writing. PMID:25425386
Double-bundle depiction of the anterior cruciate ligament at 3 Tesla
Adriaensen, M.E.A.P.M. [Atrium Medical Center Parkstad, Department of Radiology, Heerlen (Netherlands); Hogan, B. [Sports Surgery Clinic, Department of Radiology, Dublin (Ireland); Al-Bulushi, H.I.J. [Armed Forces Hospital, Department of Radiology, Muscat (Oman); Kavanagh, E.C. [Mater Misericordiae Hospital, Department of Radiology, Dublin (Ireland)
2012-07-15
Magnetic resonance imaging on 3 Tesla (3T MRI) with arthroscopic correlation has proven to adequately identify the anteromedial bundle (AMB) and posterolateral bundle (PLB) in cadaver knees. The purpose of this study was to describe the depiction of ACL bundle anatomy on 3T MRI in daily practice. In a retrospective cohort study, we included 50 consecutive patients who underwent standard 3T MRI of the knee and had an intact ACL. Two musculoskeletal radiologists independently reviewed all scans for depiction of ACL bundle anatomy using standardized forms. Descriptive statistics were used. Twenty-three right knees (46%) and 27 left knees (54%) were included in the study. Mean age of the patients was 35 years (range 12 to 68 years); 37 patients were male (74%). ACL bundle anatomy was best depicted in the axial plane in 44 knees (88%) and in the coronal plane in six knees (12%). Two bundles were seen in 47 knees (94%). The AMB was completely seen in 45 knees (90%). The PLB was completely seen in 40 knees (80%). Both bundles were completely seen in 37 knees (76%). The double-bundle anatomy of the ACL is visualized in 94% of patients on 3T MRI. Because of potentially associated clinical benefits, we advocate to report separately on the anteromedial bundle and posterolateral bundle in case of anterior cruciate ligament injury of the knee. (orig.)
Differential geometry and mathematical physics part II fibre bundles, topology and gauge fields
Rudolph, Gerd
2017-01-01
The book is devoted to the study of the geometrical and topological structure of gauge theories. It consists of the following three building blocks:- Geometry and topology of fibre bundles,- Clifford algebras, spin structures and Dirac operators,- Gauge theory.Written in the style of a mathematical textbook, it combines a comprehensive presentation of the mathematical foundations with a discussion of a variety of advanced topics in gauge theory.The first building block includes a number of specific topics, like invariant connections, universal connections, H-structures and the Postnikov approximation of classifying spaces.Given the great importance of Dirac operators in gauge theory, a complete proof of the Atiyah-Singer Index Theorem is presented. The gauge theory part contains the study of Yang-Mills equations (including the theory of instantons and the classical stability analysis), the discussion of various models with matter fields (including magnetic monopoles, the Seiberg-Witten model and dimensional r...
Ran, Ziv
2010-01-01
We compute, in terms of tautological classes, the fundamental class of the locus of stable hyperelliptic curves, i.e. the closure in the moduli space of stable curves of the locus of smooth hyperelliptic curves. The computation is based on the technique of intersection theory on Hilbert schemes (of degree 2 in this case) associated to families of nodal curves. We describe a certain bundle map ('degree-2 Brill-Noether') whose degeneracy locus consists of the stable hyperelliptics plus a residual scheme, whose contribution we compute using Fulton-MacPherson excess intersection theory. Part 1 focuses on curves of semi-compact type, whose dual graph contains cycles of length at most 2.
RADIO NOISE ADVANCES SEXUAL MATURITY
ansistf-lewis
Supplementary radio noise advances sexual maturity in domestic pullets exposed .... non-stimulatory photoperiod in some way provides a stimulus for initiating rapid gonadal development. However, the ..... Congress, New Delhi, India. Vol II ...
Maturation of sugar maple seed
Clayton M., Jr. Carl; Albert G., Jr. Snow; Albert G. Snow
1971-01-01
The seeds of a sugar maple tree (Acer saccharum Marsh.) do not mature at the same time every year. And different trees mature their seeds at different times. So time of year is not a reliable measure of when seeds are ripe. Better criteria are needed. In recent studies we have found that moisture content and color are the best criteria for judging when sugar maple...
Extensional bundle waveguide techniques for measuring flow of hot fluids.
Lynnworth, Lawrence C; Liu, Yi; Umina, John A
2005-04-01
A bundle of acoustically slender metal rods, each thin compared to wavelength, tightly packed within a sheath, and welded closed at each end, provides a dispersion-free waveguide assembly that acts as a thermal buffer between a transducer and the hot fluid medium the flow of which is to be measured. Gas and steam flow applications have ranged up to 600 degrees C. Liquid applications have ranged from cryogenic (-160 degrees C) to 500 degrees C and include intermittent two-phase flows. The individual rods comprising the bundle usually are approximately one millimeter in diameter. The sheath, made of a pipe or tube, typically has an outside diameter of 12.7 to about 33 mm and usually is about 300 mm long. Materials for the sheath and bundle are selected to satisfy requirements of compatibility with the fluid as well as for acoustic properties. Corrosion-resistant alloys such as 316SS and titanium are commonly used. The buffers are used with transducers that are metal-encapsulated and certified for use in hazardous areas. They operate at a frequency in the range of 0.1 to 1 MHz. The radiating end of the buffer is usually flat and perpendicular to the buffer's main axis. In some cases the end of the buffer is stepped or angled. Angling the radiating faces at approximately 2 degrees to overcome beam drift at Mach 0.1 recently contributed to solving a high-temperature high-velocity flow measurement problem. The temperature in this situation was 300 degrees C, and the gas molecular weight was about 95, with pressure 0.9 to 1.1 bar.
"Bundle" Practices and Ventilator-Associated Events: Not Enough.
O'Horo, John C; Lan, Haitao; Thongprayoon, Charat; Schenck, Louis; Ahmed, Adil; Dziadzko, Mikhail
2016-12-01
OBJECTIVE Ventilator-associated events (VAEs) are nosocomial events correlated with length of stay, costs, and mortality. Current ventilator bundle practices target the older definition of ventilator-associated pneumonia and have not been systematically evaluated for their impact on VAEs. DESIGN Retrospective cohort study. SETTING Tertiary medical center between January 2012 and August 2014. PARTICIPANTS All adult patients ventilated for at least 24 hours at our institution. INTERVENTIONS We conducted univariate analyses for compliance with each element; we focused on VAEs occurring within a 2-day window of failure to meet any ventilator bundle element. We used Cox proportional hazard models to assess the effect of stress ulcer prophylaxis, deep vein thrombosis (DVT) prophylaxis, oral care, and sedation breaks on VAEs. We adjusted models for gender, age, and Acute Physiology and Chronic Health Evaluation (APACHE) III scores. RESULTS Our cohort comprised 2,660 patients with 16,858 ventilator days and 77 VAEs. Adjusting for APACHE score and gender, only oral care was associated with a reduction in the risk of VAE (hazard ratio [HR], 0.44; 95% confidence interval [CI], 0.26-0.77). The DVT prophylaxis and sedation breaks did not show any significant impact on VAEs. Stress ulcer prophylaxis trended toward an increased risk of VAE (HR, 1.59; 95% CI, 1.00-2.56). CONCLUSION Although limited by a low baseline rate of VAEs, existing ventilator bundle practices do not appear to target VAEs well. Oral care is clearly important, but the impact of DVT prophylaxis, sedation breaks, and especially stress ulcer prophylaxis are questionable at best. Infect Control Hosp Epidemiol 2016;1453-1457.
Early Lessons on Bundled Payment at an Academic Medical Center.
Jubelt, Lindsay E; Goldfeld, Keith S; Blecker, Saul B; Chung, Wei-Yi; Bendo, John A; Bosco, Joseph A; Errico, Thomas J; Frempong-Boadu, Anthony K; Iorio, Richard; Slover, James D; Horwitz, Leora I
2017-09-01
Orthopaedic care is shifting to alternative payment models. We examined whether New York University Langone Medical Center achieved savings under the Centers for Medicare and Medicaid Services Bundled Payments for Care Improvement initiative. This study was a difference-in-differences study of Medicare fee-for-service patients hospitalized from April 2011 to June 2012 and October 2013 to December 2014 for lower extremity joint arthroplasty, cardiac valve procedures, or spine surgery (intervention groups), or for congestive heart failure, major bowel procedures, medical peripheral vascular disorders, medical noninfectious orthopaedic care, or stroke (control group). We examined total episode costs and costs by service category. We included 2,940 intervention episodes and 1,474 control episodes. Relative to the trend in the control group, lower extremity joint arthroplasty episodes achieved the greatest savings: adjusted average episode cost during the intervention period decreased by $3,017 (95% confidence interval [CI], -$6,066 to $31). For cardiac procedures, the adjusted average episode cost decreased by $2,999 (95% CI, -$8,103 to $2,105), and for spinal fusion, it increased by $8,291 (95% CI, $2,879 to $13,703). Savings were driven predominantly by shifting postdischarge care from inpatient rehabilitation facilities to home. Spinal fusion index admission costs increased because of changes in surgical technique. Under bundled payment, New York University Langone Medical Center decreased total episode costs in patients undergoing lower extremity joint arthroplasty. For patients undergoing cardiac valve procedures, evidence of savings was not as strong, and for patients undergoing spinal fusion, total episode costs increased. For all three conditions, the proportion of patients referred to inpatient rehabilitation facilities upon discharge decreased. These changes were not associated with an increase in index hospital length of stay or readmission rate
Hydrodynamic behavior of a bare rod bundle. [LMFBR
Bartzis, J.G.; Todreas, N.E.
1977-06-01
The temperature distribution within the rod bundle of a nuclear reactor is of major importance in nuclear reactor design. However temperature information presupposes knowledge of the hydrodynamic behavior of the coolant which is the most difficult part of the problem due to complexity of the turbulence phenomena. In the present work a 2-equation turbulence model--a strong candidate for analyzing actual three dimensional turbulent flows--has been used to predict fully developed flow of infinite bare rod bundle of various aspect ratios (P/D). The model has been modified to take into account anisotropic effects of eddy viscosity. Secondary flow calculations have been also performed although the model seems to be too rough to predict the secondary flow correctly. Heat transfer calculations have been performed to confirm the importance of anisotropic viscosity in temperature predictions. All numerical calculations for flow and heat have been performed by two computer codes based on the TEACH code. Experimental measurements of the distribution of axial velocity, turbulent axial velocity, turbulent kinetic energy and radial Reynolds stresses were performed in the developing and fully developed regions. A 2-channel Laser Doppler Anemometer working on the Reference mode with forward scattering was used to perform the measurements in a simulated interior subchannel of a triangular rod array with P/D = 1.124. Comparisons between the analytical results and the results of this experiment as well as other experimental data in rod bundle array available in literature are presented. The predictions are in good agreement with the results for the high Reynolds numbers.
A Maturity Model for Digital Data Centers
W Hugo
2013-04-01
Full Text Available Digital data and service centers, such as those envisaged by the ICSU World Data System (WDS, are subject to a wide-ranging collection of requirements and constraints. Many of these requirements are traditionally difficult to assess and to measure objectively and consistently. As a solution to this problem, an approach based on a maturity model is proposed. This adds significant value not only in respect to objective assessment but also in assisting with evaluation of overlapping and competing criteria, planning of continuous improvement, and progress towards formal evaluation by accreditation authorities.
JONG-YOUL PARK
2014-12-01
Full Text Available In terms of safety and the efficient management of spent fuel storage, detecting failed fuel is one of the most important tasks in a CANada Deuterium Uranium (CANDU reactor operation. It has been successfully demonstrated that in a CANDU reactor, on-power failed fuel detection and location systems, along with alarm area gamma monitors, can detect and locate defective and suspect fuel bundles before discharging them from the reactor to the spent fuel storage bay. In the reception bay, however, only visual inspection has been used to identify suspect bundles. Gaseous fission product and delayed neutron monitoring systems cannot precisely distinguish failed fuel elements from each fuel bundle. This study reports the use of a sipping system in a CANDU reactor for the integrity assessment of spent fuel bundles. The integrity assessment of spent fuel bundles using this sipping system has shown promise as a nondestructive test for detecting a defective fuel bundle in a CANDU reactor.
BEAM 1.7: development for modelling fuel element and bundle buckling strength
Cheng, G.; Xu, S.; Xu, Z.; Paul, U.K. [Atomic Energy of Canada, Mississauga, Ontario (Canada)
2010-07-01
This paper describes BEAM, an AECL developed computer program, used to assess mechanical integrity of CANDU fuel bundles. The BEAM code has been developed to satisfy the need for buckling strength analysis of fuel bundles. Buckling refers to the phenomenon where a compressive axial load is large enough that a small lateral load can cause large lateral deflections. The buckling strength refers to the critical compressive axial load at which lateral instability is reached. The buckling strength analysis has practical significance for the design of fuel bundles, where the buckling strength of a fuel element/bundle is assessed so that the conditions leading to bundle jamming in the pressure tube are excluded. This paper presents the development and qualification of the BEAM code, with emphasis on the theoretical background and code implementation of the newly developed fuel element/bundle buckling strength model. (author)
Semistable vector bundles and Tannaka duality from a computational point of view
Kaid, Almar
2011-01-01
We develop a semistability algorithm for vector bundles which are given as a kernel of a surjective morphism between splitting bundles on the projective space over an algebraically closed field K. This class of bundles is a generalization of syzygy bundles. We show how to implement this algorithm in a computer algebra system. Further we give applications, mainly concerning the computation of Tannaka dual groups of stable vector bundles of degree 0 on the projective space and on certain smooth complete intersection curves. We also use our algorithm to close a gap in a recent work of L. Costa, P. Macias Marques and R. M. Miro-Roig regarding the stability of the syzygy bundle of general forms. Finally, we apply our algorithm to provide a computational approach to tight closure. All algorithms are implemented in the computer algebra system CoCoA
Gauge Theories and Fiber Bundles: Definitions, Pictures, and Results
Marsh, Adam
2016-01-01
A pedagogical but concise overview of fiber bundles and their connections is provided, in the context of gauge theories in physics. The emphasis is on defining and visualizing concepts and relationships between them, as well as listing common confusions, alternative notations and jargon, and relevant facts and theorems. Special attention is given to detailed figures and geometric viewpoints, some of which would seem to be novel to the literature. Topics are avoided which are well covered in textbooks, such as historical motivations, proofs and derivations, and tools for practical calculations. The present paper is best read in conjunction with the similar paper on Riemannian geometry cited herein.
A Universal Family of Deformations for the Uniformising Higgs bundle
Dalakov, Peter
2011-01-01
Fix a simple complex Lie group G and a principal sl(2,C) subalgebra of Lie(G). Then the moduli space of semi-stable, topologically trivial G-Higgs bundles on a hyperbolic, spin Riemann surface acquires a marked point. This is the unique C*-fixed point on the Hitchin section. We describe a universal analytic family of deformations which provides holomorphic Darboux coordinates in a neighbourhood of the section. This is a special case of a more general deformation-theoretic construction in the spirit of Kuranishi theory. As a toy example of the latter we consider the tautological family of centralisers over the Kostant slice.
Vector-valued automorphic forms and vector bundles
Saber, Hicham
2013-01-01
For an arbitrary discrete group $\\Gamma$ and an $n$-dimensional complex representation $R$ of $\\Gamma$, we prove the existence of $n$ linearly independent vector-valued automorphic forms for $\\Gamma$ with multiplier $R$. To this end, we realize these automorphic forms as sections of a rank $n$ vector bundle attached to a 1-cocycle with coefficients in the sheaf $\\mbox{GL}(n,{\\mathcal O}_X)$, $X$ being the quotient of the Poincar\\'e half-plane by $\\Gamma$ completed with the cusps of $\\Gamma$.
Principal Bundles whose Restrictions to a Curve are Isomorphic
Sudarshan Rajendra Gurjar
2011-05-01
Let be a normal projective variety defined over an algebraically closed field . Let $|O_X(1)|$ be a very ample invertible sheaf on . Let be an affine algebraic group defined over . Let $E_G$ and $F_G$ be two principal -bundles on . Then there exists an integer $n \\gg 0$ (depending on $E_G$ and $F_G$) such that if the restrictions of $E_G$ and $F_G$ to a curve $C\\in |O_X(n)|$ are isomorphic, then they are isomorphic on all of .
On bundles of rank 3 computing Clifford indices
Lange, H
2012-01-01
Let $C$ be a smooth irreducible projective algebraic curve defined over the complex numbers. The notion of the Clifford index of $C$ was extended a few years ago to semistable bundles of any rank. Recent work has been focussed mainly on the rank-2 Clifford index, although interesting results have also been obtained for the case of rank 3. In this paper we extend this work, obtaining improved lower bounds for the rank-3 Clifford index. This allows the first computations of the rank-3 index in non-trivial cases and examples for which the rank-3 index is greater than the rank-2 index.
Visualization of the medial forebrain bundle using diffusion tensor imaging
Ardian eHana
2015-10-01
Full Text Available Diffusion tensor imaging is a technique that enables physicians the portrayal of white matter tracts in vivo. We used this technique in order to depict the medial forebrain bundle in 15 consecutive patients between 2012 and 2015. Men and women of all ages were included. There were 6 women and 9 men. The mean age was 58,6 years (39-77. Nine patients were candidates for an eventual deep brain stimulation. Eight of them suffered from Parkinson`s disease and one had multiple sclerosis. The remaining 6 patients suffered from different lesions which were situated in the frontal lobe. These were 2 metastasis, 2 meningiomas, 1 cerebral bleeding and 1 glioblastoma. We used a 3DT1-sequence for the navigation. Furthermore T2- and DTI- sequences were performed. The FOV was 200 x 200 mm², slice thickness 2 mm, and an acquisition matrix of 96 x 96 yielding nearly isotropic voxels of 2 x 2 x 2 mm. 3-Tesla-MRI was carried out strictly axial using 32 gradient directions and one b0-image. We used Echo-Planar-Imaging (EPI and ASSET parallel imaging with an acceleration factor of 2. b-value was 800 s/mm². The maximal angle was 50°. Additional scanning time was less than 9 minutes. We were able to visualize the medial forebrain bundle in 12 of our patients bilaterally and in the remaining 3 patients we depicted the medial forebrain bundle on one side. It was the contralateral side of the lesion. These were 2 meningiomas and one metastasis. Portrayal of the medial forebrain bundle is possible for everyday routine for neurosurgical interventions. As part of the reward circuitry it might be of substantial importance for neurosurgeons during deep brain stimulation in patients with psychiatric disorders. Furthermore it might explain at a certain extent character changes in patients with lesions in the frontal lobe. Surgery in this part of the brain should always take the preservation of this white matter tract into account.
Bundle adjustment for data processing of theodolite industrial surveying system
邹峥嵘; 丁晓利; 曾卓乔; 何凭宗
2001-01-01
The photogrammetric bundle adjustment was used in data processing of electronic theodolite industrial surveying system by converting angular observations into virtual photo coordinates. The developed algorithm has ability of precision estimation and data-snooping, do not need initial values of exterior orientation elements and object point coordinates. The form of control condition for the system is quite flexible. Neither centering nor leveling is the theodolite needed and the lay-out of theodolite position is flexible when the system is used for precise survey. Experiments carried out in test field verify the validity of the data processing method.
Left bundle branch block: a rare ECG manifestation of hyperkalemia
Venkata Madhav M
2015-04-01
Full Text Available A 20-year-old female patient with chronic kidney disease was brought to our emergency medical department with symptoms of pain in chest and abdomen, vomitings. Laboratory testing revealed serum potassium 7.7 mEq/L, serum creatinine 9.1 mg/dL. Electrocardiogram (ECG showed left bundle branch block (LBBB pattern with left axis deviation, tall T waves and ST elevation. Among ECG alterations in hyperkalemia, LBBB is rare and is being reported in our case.
Natural Diagonal Riemannian Almost Product and Para-Hermitian Cotangent Bundles
Druta-Romaniuc, Simona-Luiza
2011-01-01
We obtain the natural diagonal almost product and locally product structures on the total space of the cotangent bundle of a Riemannian manifold. We find the Riemannian almost product (locally product) and the (almost) para-Hermitian cotangent bundles of natural diagonal lift type. We prove the characterization theorem for the natural diagonal (almost) para-K\\"ahlerian structures on the total spaces of the cotangent bundle.
The spectral density function for the Laplacian on high tensor powers of a line bundle
2001-01-01
For a symplectic manifold with quantizing line bundle, a choice of almost complex structure determines a Laplacian acting on tensor powers of the bundle. For high tensor powers Guillemin-Uribe showed that there is a well-defined cluster of low-lying eigenvalues, whose distribution is described by a spectral density function. We give an explicit computation of the spectral density function, by constructing certain quasimodes on the associated principle bundle.
Moral Reasoning and Consistency of Belief and Behavior: Decisions about Substance Abuse.
Abide, Marcia M.; Richards, Herbert C.; Ramsay, Shula G.
2001-01-01
In view of Kohlberg's theory of moral development, two hypotheses were considered: individuals who consider use of illegal substances to be morally wrong will be less likely to use such substances; and, compared to those who are less mature, more mature moral reasoners display more consistency between expressed beliefs about morality of drug use…
Unfolding of the RAP-D3 helical bundle facilitates dissociation of RAP-receptor complexes.
Estrada, Kristine; Fisher, Carl; Blacklow, Stephen C
2008-02-12
The receptor-associated protein (RAP) functions as an escort protein for receptors of the low-density lipoprotein receptor (LDLR) family by preventing premature intracellular binding of ligands and assisting with delivery of mature receptors to the cell surface. The modulation of affinity by pH is believed to play an important role in the escort function of RAP, because RAP binds tightly to proteins of the LDLR family at near-neutral pH early in the secretory pathway where its high affinity precludes premature binding of ligands but then dissociates from bound receptors at the lower pH of the Golgi compartment. The third domain of RAP (RAP-D3), which forms a three-helix bundle, is sufficient to reconstitute the escort activity. Here, we test the hypothesis that low-pH induced unfolding of the RAP-D3 helical bundle facilitates dissociation of RAP-receptor complexes. First, variants of RAP-D3 resistant to low pH-induced unfolding were constructed by replacing interior histidine residues with phenylalanines. In contrast to native RAP-D3, which exhibits an unfolding pKa of 6.3 and a Tm of 42 degrees C, the most hyperstable variant of RAP-D3, in which four histidine residues are replaced with phenylalanine, has an unfolding pKa of 4.8, and a Tm of 58 degrees C. The phenylalanine substitutions in RAP-D3 confer increased stability to pH-induced dissociation of complexes formed between RAP-D3 and a two-repeat fragment of the LDLR (LA3-4). When introduced into full-length RAP, the four mutations that confer hyperstability on RAP-D3 interfere with transport of endogenous LRP-1 to the cell surface in a dominant negative fashion under conditions where expression of normal RAP has no effect on LRP-1 transport. Our studies support a model in which low pH-dependent unfolding of RAP-D3 facilitates dissociation of RAP from the LA repeats of LDLR family proteins in the mildly acidic pH of the Golgi.
Consistency of trace norm minimization
Bach, Francis
2007-01-01
Regularization by the sum of singular values, also referred to as the trace norm, is a popular technique for estimating low rank rectangular matrices. In this paper, we extend some of the consistency results of the Lasso to provide necessary and sufficient conditions for rank consistency of trace norm minimization with the square loss. We also provide an adaptive version that is rank consistent even when the necessary condition for the non adaptive version is not fulfilled.
High SNR Consistent Compressive Sensing
Kallummil, Sreejith; Kalyani, Sheetal
2017-01-01
High signal to noise ratio (SNR) consistency of model selection criteria in linear regression models has attracted a lot of attention recently. However, most of the existing literature on high SNR consistency deals with model order selection. Further, the limited literature available on the high SNR consistency of subset selection procedures (SSPs) is applicable to linear regression with full rank measurement matrices only. Hence, the performance of SSPs used in underdetermined linear models ...
Hussein, Mohsen; van Eck, Carola F; Cretnik, Andrej; Dinevski, Dejan; Fu, Freddie H
2012-03-01
Three different techniques of anterior cruciate ligament (ACL) reconstruction--conventional (transtibial) single bundle (CSB), anatomic single bundle (ASB), and anatomic double bundle (ADB)--have been described. To determine if double-bundle reconstruction is needed to restore rotational stability or if anatomic placement of a single bundle can yield similar results. Randomized controlled trial; Level of evidence, 1. From December 2005 to December 2007, 320 patients were prospectively randomized into 3 groups: ADB, ASB, and CSB reconstruction. The average follow-up was 51.15 months (range, 39-63 months). At the final follow-up, 281 patients were available. In all groups, hamstring tendons were used with suspensory fixation on the femoral side and bioabsorbable interference screw fixation on the tibial side. The outcomes were evaluated by an independent blinded observer using the Lysholm score and subjective International Knee Documentation Committee (IKDC) form. The KT-1000 arthrometer was used to evaluate anteroposterior stability, and the pivot-shift test was used to determine rotational stability. Anatomic single-bundle reconstruction resulted in better anteroposterior and rotational stability than CSB reconstruction (average side-to-side difference for anterior tibial translation was 1.6 mm in the ASB group vs 2.0 mm in the CSB group; P = .002). Negative pivot shift was 66.7% vs 41.7% (P = .003). In other parameters, the differences between groups were not statistically significant. The results of the ADB group were also superior to the ASB group for anteroposterior and rotational stability (average side-to-side difference for anterior tibial translation was 1.2 mm in the ADB group vs 1.6 mm in the ASB group; P = .002). Negative pivot shift was 93.1% vs 66.7%, respectively (P ADB groups, respectively. The difference was significant only when we compared ADB and CSB (P = .025). Subjective IKDC scores were 90.2, 90.6, and 92.1 in the CSB, ASB, and ADB groups
Overview of methods to increase dryout power in CANDU fuel bundles
Groeneveld, D.C., E-mail: degroeneveld@gmail.com [Chalk River Laboratories, AECL, Chalk River (Canada); University of Ottawa, Department of Mechanical Engineering, Ottawa (Canada); Leung, L.K.H. [Chalk River Laboratories, AECL, Chalk River (Canada); Park, J.H. [Korean Atomic Energy Research Institute, Daejeon (Korea, Republic of)
2015-06-15
Highlights: • Small changes in bundle geometry can have noticeable effects on the bundle CHF. • Rod spacing devices can results in increases of over 200% in CHF. • CHF enhancement decays exponentially downstream from spacers. • CHF-enhancing bundle appendages also increase the post-CHF heat transfer. - Abstract: In CANDU reactors some degradation in the CCP (critical channel power, or power corresponding to the first occurrence of CHF in any fuel channel) will occur with time because of ageing effects such as pressure-tube diametral creep, increase in reactor inlet-header temperature, increased hydraulic resistance of feeders. To compensate for the ageing effects, various options for recovering the loss in CCP are described in this paper. They include: (i) increasing the bundle heated perimeter, (ii) optimizing the bundle configuration, (iii) optimizing core flow and flux distribution, (iv) reducing the bundle hydraulic resistance, (v) use of CHF-enhancing bundle appendages, (vi) more precise experimentation, and (vii) redefining CHF. The increase in CHF power has been quantified based on experiments on full-scale bundles and subchannel code predictions. The application of several of these CHF enhancement principles has been used in the development of the 43-rod CANFLEX bundle.
Film condensation of R-113 on staggered bundles of horizontal finned tubes
Honda, H. (Kyushu Univ., Fukuoka (Japan)); Uchima, B. (Kagawa Technical Coll., Marugame (Japan)); Nozu, S.; Torigoe, E.; Imai, S. (Okayama Univ., Tsushima (Japan))
1992-05-01
Film condensation of R-113 on staggered bundles of horizontal finned tubes with vertical vapor downflow was experimentally investigated. Two tubes with flat-sided annular fins and four tubes with three-dimensional fins were tested. The condensate flow and heat transfer characteristics were compared with the previous results for in-line bundles of the same test tubes and a staggered bundle of smooth tubes. The decrease in heat transfer characteristics were compared with the previous results for in-line bundles of the same test tubes and a staggered bundle of smooth tubes. The decrease in heat transfer due to condensate inundation was most significant for the in-line bundles of the three-dimensional fin tubes, whereas the decrease was very slow for both the staggered and in-line bundles of the flat-sided fin tubes. The predictions of the previous theoretical model for a bundle of flat-sided fin tubes agreed fairly well with the measured data at a low vapor velocity. The highest heat transfer performance was provided by the staggered bundle of flat-sided fin tubes with fin dimensions close to the theoretically determined optimum values.
Padilla-Gamiño, J. L.; Weatherby, T. M.; Waller, R. G.; Gates, R. D.
2011-06-01
The majority of scleractinian corals are hermaphrodites that broadcast spawn their gametes separately or packaged as egg-sperm bundles during spawning events that are timed to the lunar cycle. The egg-sperm bundle is an efficient way of transporting gametes to the ocean surface where fertilization takes place, while minimizing sperm dilution and maximizing the opportunity for gamete encounters during a spawning event. To date, there are few studies that focus on the formation and structure of egg-sperm bundle. This study explores formation, ultrastructure, and longevity of the egg-sperm bundle in Montipora capitata, a major reef building coral in Hawai`i. Our results show that the egg-sperm bundle is formed by a mucus layer secreted by the oocytes. The sperm package is located at the center of each bundle, possibly reflecting the development of male and female gametes in different mesenteries. Once the egg-sperm bundle has reached the ocean surface, it breaks open within 10-35 min, depending on the environmental conditions (i.e., wind, water turbulence). Although the bundle has an ephemeral life span, the formation of an egg-sperm bundle is a fundamental part of the reproductive process that could be strongly influenced by climate change and deterioration of water quality (due to anthropogenic effects) and thus requires further investigation.
Designing variable height carbon nanotube bundle for enhanced electron field emission
Khaneja, Mamta; Ghosh, Santanu; Chaudhury, P. K.; Vankar, V. D.; Kumar, Vikram
2015-05-01
A variable height model has been implemented in order to improve the emission performance from a nanotube bundle. A Gaussian distribution of nanotube heights has been considered. This resulted in a nearly uniform electric field distribution across all the nanotubes and consequently an enhanced emission current in comparison to a nanotube bundle with all the nanotubes having the same height. Simulation results from linear as well as area nanotube bundles are reported. The analysis helped in providing a better understanding of the previously reported experimental results on enhanced field emission from plasma treated nanotube bundles having CNTs of variable heights.
Geometry of moduli stacks of (k , l) -stable vector bundles over algebraic curves
Mata-Gutiérrez, O.; Neumann, Frank
2017-01-01
We study the geometry of the moduli stack of vector bundles of fixed rank and degree over an algebraic curve by introducing a filtration made of open substacks build from (k , l) -stable vector bundles. The concept of (k , l) -stability was introduced by Narasimhan and Ramanan to study the geometry of the coarse moduli space of stable bundles. We will exhibit the stacky picture and analyse the geometric and cohomological properties of the moduli stacks of (k , l) -stable vector bundles. For particular pairs (k , l) of integers we also show that these moduli stacks admit coarse moduli spaces and we discuss their interplay.
Sperm competition promotes diversity of sperm bundles in Ohomopterus ground beetles
Takami, Yasuoki; Sota, Teiji
2007-07-01
Diversification of sperm morphology has been investigated in the context of sperm competition, but the adaptive significance of sperm bundles is still unclear. In analyzing 10 taxa of the genus Carabus subgenus Ohomopterus and one related Carabus ground beetles, we found that dimorphic sperm bundles occurred in most species with varied degrees of bimodality, whereas sperm were generally monomorphic. Comparative analyses with phylogenetically independent contrasts revealed that the sizes of large and small sperm bundles evolved more rapidly than, and were not correlated with, the length of sperm, suggesting more intense selection on sperm bundle sizes and their independent responses to different evolutionary forces. The size of large sperm bundles was positively correlated with male genital morphology (pertinent to displacement of rival spermatophores) and postcopulatory guarding duration as well as male body length, suggesting that larger sperm bundles have been favored when the risk of spermatophore displacement is high. Larger sperm bundles may be advantageous because of their ability to migrate more rapidly into the spermatheca. In contrast, no clear association was detected between the small sperm bundle size and mating traits despite its rapid diversification. The present study provides the first record of heteromorphic sperm bundles, the diversity of which may be promoted by sperm competition.
Numerical model for thermal and mechanical behaviour of a CANDU 37-element bundle
Jiang, L.; MacKay, K. [Martec Limited, Halifax, Nova Scotia (Canada); Gibb, R. [Canadian Nuclear Safety Commission (CNSC), Ottawa, Ontario (Canada)
2010-07-01
Prediction of transient fuel bundle deformations is important for assessing the integrity of fuel and the surrounding structural components under different operating conditions including accidents. For numerical simulation of the interactions between fuel bundle and pressure tube, a reliable numerical bundle model is required to predict thermal and mechanical behaviour of the fuel bundle assembly under different thermal loading conditions. To ensure realistic representations of the bundle behaviour, this model must include all of the important thermal and mechanical features of the fuel bundle, such as temperature-dependent material properties, thermal viscoplastic deformation in sheath, fuel-to-sheath interactions, endplate constraints and contacts between fuel elements. In this paper, we present a finite element based numerical model for predicting macroscopic transient thermal-mechanical behaviour of a complete 37-element CANDU nuclear fuel bundle under accident conditions and demonstrate its potential for being used to investigate fuel bundle to pressure tube interaction in future nuclear safety analyses. This bundle model has been validated against available experimental and numerical solutions and applied to various simulations involving steady-state and transient loading conditions. (author)
Kerr, I. D.; Sankararamakrishnan, R; Smart, O.S.; Sansom, M S
1994-01-01
A parallel bundle of transmembrane (TM) alpha-helices surrounding a central pore is present in several classes of ion channel, including the nicotinic acetylcholine receptor (nAChR). We have modeled bundles of hydrophobic and of amphipathic helices using simulated annealing via restrained molecular dynamics. Bundles of Ala20 helices, with N = 4, 5, or 6 helices/bundle were generated. For all three N values the helices formed left-handed coiled coils, with pitches ranging from 160 A (N = 4) to...
Significance of the resting angles of hair-cell bundles for Hopf bifurcation criticality
Kim, Kyung-Joong; Ahn, Kang-Hun
2016-08-01
We investigate the significance of the inclined angle of a hair bundle at equilibrium. We find that, while the angle gives a geometrical conversion factor between the bundle deflection and the ion channel displacement, it also controls the dynamics of the bundle. We show that a Hopf bifurcation, which enhances sensitivity, can be driven by the geometrical factor. However, existing experimental data indicate that mammalian auditory hair-cell bundles are located far away from the Hopf bifurcation point, suggesting that the high sensitivity of mammalian hearing might come from other mechanisms.
From Crescent to Mature Virion: Vaccinia Virus Assembly and Maturation
Liang Liu
2014-10-01
Full Text Available Vaccinia virus (VACV has achieved unprecedented success as a live viral vaccine for smallpox which mitigated eradication of the disease. Vaccinia virus has a complex virion morphology and recent advances have been made to answer some of the key outstanding questions, in particular, the origin and biogenesis of the virion membrane, the transformation from immature virion (IV to mature virus (MV, and the role of several novel genes, which were previously uncharacterized, but have now been shown to be essential for VACV virion formation. This new knowledge will undoubtedly contribute to the rational design of safe, immunogenic vaccine candidates, or effective antivirals in the future. This review endeavors to provide an update on our current knowledge of the VACV maturation processes with a specific focus on the initiation of VACV replication through to the formation of mature virions.
Guidelines for assessing the knowledge management maturity of organizations
C. J. Kruger
2007-11-01
Full Text Available In a recent article Kruger and Snyman hypothesized that progressions in knowledge management maturity (from a strategic perspective are directly related to an increased ability to speed up the strategic cycle of imitation, consolidation and innovation. The arguments proposed, however, neglected to supply the reader with a practical toolkit or even a roadmap (a time-related matrix, or questionnaire to successfully measure succession in knowledge management maturity. This article builds on the previous one and proposes a questionnaire consisting of six sections, containing 101 descriptive questions, to enable organizations to test and assess their knowledge management maturity empirically. The development of an instrument to measure knowledge management maturity required adhering to a research design that combined theoretical propositions with practical experimentation. As a point of departure, a knowledge management maturity matrix consisting of seven maturity levels was formulated. All questions contained within the matrix were benchmarked against a survey questionnaire developed by the public management service of the OECD (PUMA and were also pre-tested and validated. This process of refinement led to the formulation of the Knowledge Management Maturity Questionnaire. To avoid any taint of this research being based only on theoretical propositions, the questionnaire was tested by 178 master students of the University of Pretoria, South Africa, in nine different industries. The proposed questionnaire provides a bridge between theoretical propositions and practical usability, not only enabling knowledge management practitioners to assess the level of knowledge management maturity reached successfully but, more importantly, also serving as a guideline to institutionalize further and future knowledge management endeavours.
Kang, Liping; Jiang, Yishu; Tang, Xiuhua; Yang, Mingyang; Liu, Zonghuai
2012-01-01
One-dimensional manganese oxide nanobelt bundles with birnessite-type structure have been synthesized by a hydrothermal process in a NaOH solution employing K-type layered manganese oxide as a precursor. The obtained manganese oxide nanobelt bundles exhibit excellent discharge properties and cycle stability. The initial capacity is 376 mAh-g-1 and the reversible capacity of 243 mAhog-1 is maintained after the 50th cycle at a current density of 20 mA·g-t. Meanwhile, the manganese oxide nanobelt bundles show an excellent cycle performance even if at relative high current density.
Motor-free actin bundle contractility driven by molecular crowding
Schnauß, Jörg; Schuldt, Carsten; Schmidt, B U Sebastian; Glaser, Martin; Strehle, Dan; Heussinger, Claus; Käs, Josef A
2015-01-01
Modeling approaches of suspended, rod-like particles and recent experimental data have shown that depletion forces display different signatures depending on the orientation of these particles. It has been shown that axial attraction of two rods yields contractile forces of 0.1pN that are independent of the relative axial shift of the two rods. Here, we measured depletion-caused interactions of actin bundles extending the phase space of single pairs of rods to a multi-particle system. In contrast to a filament pair, we found forces up to 3pN . Upon bundle relaxation forces decayed exponentially with a mean decay time of 3.4s . These different dynamics are explained within the frame of a mathematical model by taking pairwise interactions to a multi-filament scale. The macromolecular content employed for our experiments is well below the crowding of cells. Thus, we propose that arising forces can contribute to biological force generation without the need to convert chemical energy into mechanical work.
Hair cell bundles: flexoelectric motors of the inner ear.
Kathryn D Breneman
Full Text Available Microvilli (stereocilia projecting from the apex of hair cells in the inner ear are actively motile structures that feed energy into the vibration of the inner ear and enhance sensitivity to sound. The biophysical mechanism underlying the hair bundle motor is unknown. In this study, we examined a membrane flexoelectric origin for active movements in stereocilia and conclude that it is likely to be an important contributor to mechanical power output by hair bundles. We formulated a realistic biophysical model of stereocilia incorporating stereocilia dimensions, the known flexoelectric coefficient of lipid membranes, mechanical compliance, and fluid drag. Electrical power enters the stereocilia through displacement sensitive ion channels and, due to the small diameter of stereocilia, is converted to useful mechanical power output by flexoelectricity. This motor augments molecular motors associated with the mechanosensitive apparatus itself that have been described previously. The model reveals stereocilia to be highly efficient and fast flexoelectric motors that capture the energy in the extracellular electro-chemical potential of the inner ear to generate mechanical power output. The power analysis provides an explanation for the correlation between stereocilia height and the tonotopic organization of hearing organs. Further, results suggest that flexoelectricity may be essential to the exquisite sensitivity and frequency selectivity of non-mammalian hearing organs at high auditory frequencies, and may contribute to the "cochlear amplifier" in mammals.
Resolving bundled microtubules using anti-tubulin nanobodies.
Mikhaylova, Marina; Cloin, Bas M C; Finan, Kieran; van den Berg, Robert; Teeuw, Jalmar; Kijanka, Marta M; Sokolowski, Mikolaj; Katrukha, Eugene A; Maidorn, Manuel; Opazo, Felipe; Moutel, Sandrine; Vantard, Marylin; Perez, Frank; van Bergen en Henegouwen, Paul M P; Hoogenraad, Casper C; Ewers, Helge; Kapitein, Lukas C
2015-08-11
Microtubules are hollow biopolymers of 25-nm diameter and are key constituents of the cytoskeleton. In neurons, microtubules are organized differently between axons and dendrites, but their precise organization in different compartments is not completely understood. Super-resolution microscopy techniques can detect specific structures at an increased resolution, but the narrow spacing between neuronal microtubules poses challenges because most existing labelling strategies increase the effective microtubule diameter by 20-40 nm and will thereby blend neighbouring microtubules into one structure. Here we develop single-chain antibody fragments (nanobodies) against tubulin to achieve super-resolution imaging of microtubules with a decreased apparent diameter. To test the resolving power of these novel probes, we generate microtubule bundles with a known spacing of 50-70 nm and successfully resolve individual microtubules. Individual bundled microtubules can also be resolved in different mammalian cells, including hippocampal neurons, allowing novel insights into fundamental mechanisms of microtubule organization in cell- and neurobiology.
Prostaglandins temporally regulate cytoplasmic actin bundle formation during Drosophila oogenesis.
Spracklen, Andrew J; Kelpsch, Daniel J; Chen, Xiang; Spracklen, Cassandra N; Tootle, Tina L
2014-02-01
Prostaglandins (PGs)--lipid signals produced downstream of cyclooxygenase (COX) enzymes--regulate actin dynamics in cell culture and platelets, but their roles during development are largely unknown. Here we define a new role for Pxt, the Drosophila COX-like enzyme, in regulating the actin cytoskeleton--temporal restriction of actin remodeling during oogenesis. PGs are required for actin filament bundle formation during stage 10B (S10B). In addition, loss of Pxt results in extensive early actin remodeling, including actin filaments and aggregates, within the posterior nurse cells of S9 follicles; wild-type follicles exhibit similar structures at a low frequency. Hu li tai shao (Hts-RC) and Villin (Quail), an actin bundler, localize to all early actin structures, whereas Enabled (Ena), an actin elongation factor, preferentially localizes to those in pxt mutants. Reduced Ena levels strongly suppress early actin remodeling in pxt mutants. Furthermore, loss of Pxt results in reduced Ena localization to the sites of bundle formation during S10B. Together these data lead to a model in which PGs temporally regulate actin remodeling during Drosophila oogenesis by controlling Ena localization/activity, such that in S9, PG signaling inhibits, whereas at S10B, it promotes Ena-dependent actin remodeling.
[Unstable angina pectoris in intermittent left bundle branch block].
Albert, S; Flury, G
1997-11-19
We present a case report of a 57 year old woman with recurrent chest pain, initially exclusively at exercise and later also at rest. This led to an emergency hospitalization for suspected myocardial infarction. As there were no enzymatic and electrocardiographic signs of acute infarction she was treated, as unstable angina pectoris. Coronary angiography revealed but a modest coronary atheromatosis without significant coronary stenosis. Therefore her symptoms were interpreted as primary manifestation of an intermittant Left Bundle Branch Block (LBBB) with changing heart-rate dependency. A majority of patients with LBBB and chest pain have a relevant Coronary Artery Disease (CAD). There is a small number of reports in literature about patients with intermittant LBBB without significant CAD but with both typical (exercise-induced) and atypical (at rest) chest pain. Special features of our case are presentation of LBBB as unstable angina, documentation of an intermittant LBBB with changing heart-rate dependency and heart-rate-dependent supranormal conduction in the left bundle branch. We review some important aspects of LBBB with regard to this case.
Synergetic driving concepts for bundled miniature ultrasonic linear motors.
Mracek, Maik; Hemsel, Tobias
2006-12-22
Rotary ultrasonic motors have found broad industrial application in camera lens drives and other systems. Linear ultrasonic motors in contrast have only found limited applications. The main reason for the limited range of application of these very attractive devices seems to be their small force and power range. Attempts to build linear ultrasonic motors for high forces and high power applications have not been truly successful yet. To achieve larger force and higher power, multiple miniaturized motors can be combined. This approach, however, is not as simple as it appears at first glance. The electromechanical behaviour of the individual motors differs slightly due to manufacturing and assembly tolerances. The individual motor characteristics are strongly dependent on the driving parameters (frequency, voltage, temperature, pre-stress, etc.) and the driven load and the collective behaviour of the swarm of motors is not just the linear superposition of the individual drive's forces. Thus, the bundle of motors has to be synchronized and controlled appropriately in order to obtain an optimized drive that is not oversized and costly. We have investigated driving and control strategies of a set of linear ultrasonic motors. Our contribution will be divided into three main parts. In part I ultrasonic linear motors will be introduced. In part II driving strategies for a single motor as well as for a bundle of motors will be presented. These concepts will be verified by simulation results and experimental data. In part III a simplified model for the motor's electromechanical behaviour will be given.
Anatomic double-bundle anterior cruciate ligament reconstruction
DAI Xue-song
2012-01-01
Objective: To retrospectively evaluate the early results of anatomic double-bundle anterior cruciate ligament (ACL) reconstruction and compare with the results of native ACL of the contralateral knee.Methods: The results of a consecutive series of 118 patients receiving arthroscopic ACL reconstruction were evaluated.Eight patients were lost to the latest follow-up,leaving a total of 110 patients available for study within at least 3 years' clinical follow-up.Among them,63 patients underwent postoperative MRI and CT scan,as well as clinical evaluation.Results: After reconstruction,the knees were stable and pain-free.Mean postoperative Lysholm score was 95.54 in 110 patients after 3 years.CT and MRI assessment showed that the reconstruction centered in the femoral footprint of ACL (n=63).The sagittal ACL angle in the reconstructed ACL (52.16°±2.45°) was much close to that in the contralateral intact ACL (51.31 °±2.18°,P＞0.05).By ACL-Blumensaat line angle analysis,there was no difference between doublebundle reconstructed knees and their contralateral normal knees (4.67°±0.43° vs.4.62°±0.60°,P＞0.05).Conclusion:Anatomic double-bundle ACL reconstruction can place grafts more precisely in the anatomic footprint of the ACL and better restore knee kinematics.
Cortactin Adopts a Globular Conformation and Bundles Actin into Sheets
Cowieson, Nathan P.; King, Gordon; Cookson, David; Ross, Ian; Huber, Thomas; Hume, David A.; Kobe, Bostjan; Martin, Jennifer L. (Queensland); (Aust. Synch.)
2008-08-21
Cortactin is a filamentous actin-binding protein that plays a pivotal role in translating environmental signals into coordinated rearrangement of the cytoskeleton. The dynamic reorganization of actin in the cytoskeleton drives processes including changes in cell morphology, cell migration, and phagocytosis. In general, structural proteins of the cytoskeleton bind in the N-terminal region of cortactin and regulatory proteins in the C-terminal region. Previous structural studies have reported an extended conformation for cortactin. It is therefore unclear how cortactin facilitates cross-talk between structural proteins and their regulators. In the study presented here, circular dichroism, chemical cross-linking, and small angle x-ray scattering are used to demonstrate that cortactin adopts a globular conformation, thereby bringing distant parts of the molecule into close proximity. In addition, the actin bundling activity of cortactin is characterized, showing that fully polymerized actin filaments are bundled into sheet-like structures. We present a low resolution structure that suggests how the various domains of cortactin interact to coordinate its array of binding partners at sites of actin branching.
Modern Methods of Bundle Adjustment on the Gpu
Hänsch, R.; Drude, I.; Hellwich, O.
2016-06-01
The task to compute 3D reconstructions from large amounts of data has become an active field of research within the last years. Based on an initial estimate provided by structure from motion, bundle adjustment seeks to find a solution that is optimal for all cameras and 3D points. The corresponding nonlinear optimization problem is usually solved by the Levenberg-Marquardt algorithm combined with conjugate gradient descent. While many adaptations and extensions to the classical bundle adjustment approach have been proposed, only few works consider the acceleration potentials of GPU systems. This paper elaborates the possibilities of time and space savings when fitting the implementation strategy to the terms and requirements of realizing a bundler on heterogeneous CPUGPU systems. Instead of focusing on the standard approach of Levenberg-Marquardt optimization alone, nonlinear conjugate gradient descent and alternating resection-intersection are studied as two alternatives. The experiments show that in particular alternating resection-intersection reaches low error rates very fast, but converges to larger error rates than Levenberg-Marquardt. PBA, as one of the current state-of-the-art bundlers, converges slower in 50 % of the test cases and needs 1.5-2 times more memory than the Levenberg- Marquardt implementation.
Cardiac pacing in left bundle branch/ bifascicular block patients
Maddali Madan
2010-01-01
Full Text Available The primary concern in patients with bifascicular block is the increased risk of progression to complete heart block. Further, an additional first-degree A-V block in patients with bifascicular block or LBBB might increase the risk of block progression. Anesthesia, monitoring and surgical techniques can induce conduction defects and bradyarrhythmias in patients with pre-existing bundle branch block. In the setting of an acute MI, several different types of conduction disturbance may become manifest and complete heart block occurs usually in patients with acute myocardial infarction more commonly if there is pre-existing or new bundle branch block. The question that arises is whether it is necessary to insert a temporary pacing catheter in patients with bifascicular block undergoing anesthesia. It is important that an anesthesiologist should be aware of the indications for temporary cardiac pacing as well as the current recommendations for permanent pacing in patients with chronic bifascicular and trifascicular block. This article also highlights the recent guidelines for temporary transvenous pacing in the setting of acute MI and the different pacing modalities that are available for an anesthesiologist.
Jennifer Olt
Full Text Available Sound transduction depends upon mechanosensitive channels localized on the hair-like bundles that project from the apical surface of cochlear hair cells. Hair bundles show a stair-case structure composed of rows of stereocilia, and each stereocilium contains a core of tightly-packed and uniformly-polarized actin filaments. The growth and maintenance of the stereociliary actin core are dynamically regulated. Recently, it was shown that the actin-binding protein gelsolin is expressed in the stereocilia of outer hair cells (OHCs and in its absence they become long and straggly. Gelsolin is part of a whirlin scaffolding protein complex at the stereocilia tip, which has been shown to interact with other actin regulatory molecules such as Eps8. Here we investigated the physiological effects associated with the absence of gelsolin and its possible overlapping role with Eps8. We found that, in contrast to Eps8, gelsolin does not affect mechanoelectrical transduction during immature stages of development. Moreover, OHCs from gelsolin knockout mice were able to mature into fully functional sensory receptors as judged by the normal resting membrane potential and basolateral membrane currents. Mechanoelectrical transducer current in gelsolin-Eps8 double knockout mice showed a profile similar to that observed in the single mutants for Eps8. We propose that gelsolin has a non-overlapping role with Eps8. While Eps8 is mainly involved in the initial growth of stereocilia in both inner hair cells (IHCs and OHCs, gelsolin is required for the maintenance of mature hair bundles of low-frequency OHCs after the onset of hearing.