WorldWideScience

Sample records for mattress making industry

  1. 16 CFR 1632.4 - Mattress test procedure.

    Science.gov (United States)

    2010-01-01

    ... position at a reasonable height for making observations. (ii) If thin flexible mattresses or mattress pads... relative humidity measuring instrument, a thin rod, straight pins, a knife or scissors, and tongs are... (from water bottle), cut around the burning material with a knife or scissors and pull the material out...

  2. Conceptontwerp nieuwe slaapmatten (Concept Design of Sleeping Mattresses)

    Science.gov (United States)

    2008-11-01

    Datum november 2008 Auteur (s) drs. P.A. Reffeltrath ing. M.G. Brandsma M.G.M. Weghorst Rubricering rapport Ongerubriceerd TK9 TNO-rapport...slaapmatten in combinatie met de gegevens van objectieve metingen. In theorie maakt het conceptontwerp het mogelijk om tegen minder gewicht en pakvolume...making a mattress that is lighter, has less packing volume, is more comfortable and more durable than the currently available mattresses. In theory

  3. 21 CFR 880.5560 - Temperature regulated water mattress.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Temperature regulated water mattress. 880.5560... Therapeutic Devices § 880.5560 Temperature regulated water mattress. (a) Identification. A temperature regulated water mattress is a device intended for medical purposes that consists of a mattress of suitable...

  4. 16 CFR 1632.5 - Mattress pad test procedure.

    Science.gov (United States)

    2010-01-01

    ... 1632.5 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FLAMMABLE FABRICS ACT REGULATIONS... substrate. (b) Flame resistant mattress pads. The following additional requirements shall be applicable to mattress pads which contain a chemical fire retardant. (1) These mattress pads shall be tested in...

  5. Esprit HR mattress cover in pressure ulcer prevention.

    Science.gov (United States)

    Khoulowa, J

    Modern mattresses provide soft dense foam, which permits the redistribution of pressure on the patient over a wider area - away from bony prominences where pressure ulcers usually occur. The material used in producing multistretch covers for the new mattresses had a tendency to delaminate as a result of a combination of heat, moisture and inappropriate cleansing techniques causing the water barriers to fall. In partnership with York Health NHS Trust and the material manufacturer, STM Healthcare produced a mattress cover (Esprit HR) which was able to withstand higher pressure from heat and moisture and greatly extended the life expectancy of the Esprit HR mattress.

  6. 16 CFR 1632.31 - Mattresses/mattress pads-labeling, recordkeeping, guaranties and “one of a kind” exemption.

    Science.gov (United States)

    2010-01-01

    ...) Products intended for one time use (see § 1632.5(b)(1)(i)) are not subject to the requirements of... description of each mattress or mattress pad prototype with an assigned prototype identification number. (2) Test results and details of each prototype test performed in accordance with § 1632.4 or § 1632.5...

  7. The provision of therapy mattresses for pressure ulcer prevention.

    Science.gov (United States)

    Pagnamenta, Fania

    2017-03-23

    Preventing pressure ulcers is complex and involves skin care, the provision of therapy mattresses, repositioning, the management of incontinence and adequate nutritional support. This article describes a model of therapy mattress provision that is based on non-powered products. Evaluating the efficiency of this model is challenging, due to the complexities of care, but Safety Thermometer data and incidents reports offer reassurance that non-powered therapy mattresses can provide adequate pressure ulcer prevention. Therapy mattress provision is only one of the five interventions and these are described in details to give readers a fuller picture of the model used at the author's trust.

  8. Pyroglyphid mites, xerophilic fungi and allergenic activity in dust from hospital mattresses.

    Science.gov (United States)

    v d Lustgraaf, B; Jorde, W

    1977-12-01

    Dust from mattresses of different composition and age was analysed for mites, xerophilic fungi and allergenic activity. The mites of the genus Demodex were the most abundant (58.2 per cent). Also pyroglyphid mites occurred commonly (36.6 per cent). Pyroglyphid mites were present in small numbers (mean: 1 specimen/0.2 g of dust) in 12 out of the 17 older polyester-foam mattresses. The 11 cotton-horsechair mattresses and the newly used polyester-foam mattresses (three tested) were without them. The dust from the cotton-horsehair mattresses had a significantly higher allergenic activity than from those of polyester-foam. Xerophilic fungi were isolated in three out of 31 mattresses. The species isolated belonged to the genus Aspergillus and Eurotium. E. repens occurred most frequently. Disinfection of mattresses was suggested to have a negative influence on the occurrence of mites and fungi.

  9. The Medial Stitch in Transosseous-Equivalent Rotator Cuff Repair: Vertical or Horizontal Mattress?

    Science.gov (United States)

    Montanez, Anthony; Makarewich, Christopher A; Burks, Robert T; Henninger, Heath B

    2016-09-01

    Despite advances in surgical technique, rotator cuff repair retears continue to occur at rates of 10%, 22%, and 57% for small, medium, and large tears, respectively. A common mode of failure in transosseous-equivalent rotator cuff repairs is tissue pullout of the medial mattress stitch. While the medial mattress stitch has been studied extensively, no studies have evaluated a vertical mattress pattern placed near the musculotendinous junction in comparison with a horizontal mattress pattern. Vertical mattress stitches will have higher load to failure and lower gapping compared with horizontal mattress stitches in a transosseous-equivalent rotator cuff repair. Controlled laboratory study. Double-row transosseous-equivalent rotator cuff repairs were performed in 9 pairs of human male cadaveric shoulders (mean age ± SD, 58 ± 10 years). One shoulder in each pair received a medial-row suture pattern using a vertical mattress stitch, and the contralateral shoulder received a horizontal mattress. Specimens were mounted in a materials testing machine and tested in uniaxial tensile deformation for cyclic loading (500 cycles at 1 Hz to 1.0 MPa of effective stress), followed by failure testing carried out at a rate of 1 mm/s. Construct gapping and applied loads were monitored continuously throughout the testing. Vertical mattress sutures were placed in 5 right and 4 left shoulders. Peak cyclic gapping did not differ between vertical (mean ± SD, 2.8 ± 1.1 mm) and horizontal mattress specimens (3.0 ± 1.2 mm) (P = .684). Vertical mattress sutures failed at higher loads compared with horizontal mattress sutures (568.9 ± 140.3 vs 451.1 ± 174.3 N; P = .025); however, there was no significant difference in failure displacement (8.0 ± 1.6 vs 6.0 ± 2.1 mm; P = .092). Failure stiffness did not differ between the suture patterns (P = .204). In transosseous-equivalent rotator cuff repairs near the musculotendinous junction, a vertical mattress suture used as the medial stitch

  10. 21 CFR 880.5550 - Alternating pressure air flotation mattress.

    Science.gov (United States)

    2010-04-01

    ... body pressure. The device is used to prevent and treat decubitus ulcers (bed sores). (b) Classification... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Alternating pressure air flotation mattress. 880... Personal Use Therapeutic Devices § 880.5550 Alternating pressure air flotation mattress. (a) Identification...

  11. The accumulation of dust mite allergens on mattresses made of different kinds of materials.

    Science.gov (United States)

    Visitsunthorn, Nualanong; Chirdjirapong, Varakorn; Pootong, Visanu; Jirapongsananuruk, Orathai; Pacharn, Punchama; Weeravejsukit, Sirirat; Mahakittikun, Vanna; Vichyanond, Pakit

    2010-01-01

    Different mattress materials may affect the accumulation of allergens. To compare the amount of group 1 dust mite allergens (Der p1 + Der f1) on mattresses made of different kinds of materials before and after use. Sixty new mattresses made of kapok, synthetic fiber, coconut fiber and sponge-like polyurethane, were placed in the house officers' dormitory at Siriraj hospital, Thailand. The dust samples were collected before (0), 1, 2, 3, 6, 9 and 12 months after the mattresses were used. Group 1 dust mite allergens were analyzed using two-site monoclonal antibody ELISA. Der f1 made up 86.7 % of group 1 allergens found in the matress dust. After the 2nd month, only the mean level in sponge-like polyurethane mattress was under 2 microg/g dust (sensitized level). At the 6th month, the mean levels were 13.1 in coconut, 21.7 in kapok and 17.3 microg/g dust in synthetic fiber, all of which were more than 10 microg/g dust (symptomatic level). At the 9th month, the level in sponge-like polyurethane mattress was increased to 11.2 microg/g. At 12th month the level in coconut fiber, sponge-like polyurethane synthetic fiber and kapok mattresses were 20.2, 22.4, 28.9 and 32.2 microg/g dust respectively. The accumulation rate in kapok and synthetic mattresses was significantly higher than coconut and sponge-like polyurethane mattresses. The mean level of group 1 mite allergens exceeded 10 microg/g dust after the 6th month of use in coconut fiber, kapok and synthetic fiber and at the 9th month in sponge-like polyurethane mattress.

  12. Warming preterm infants in the delivery room: polyethylene bags, exothermic mattresses or both?

    Science.gov (United States)

    McCarthy, Lisa K; O'Donnell, Colm P F

    2011-12-01

    To compare the admission temperature of infants treated with polyethylene bags alone to infants treated with exothermic mattresses in addition to bags in the delivery room. We prospectively studied infants born at bags at birth. Some infants were also placed on mattresses. Admission axillary temperatures were measured in all infants on admission to the neonatal intensive care. We compared the temperatures of infants treated with bags alone to those treated with mattresses and bags. We studied 43 infants: 15 were treated with bags while 28 were treated with a bag and mattress. Mean admission temperature was similar between the groups. Hypothermia and hyperthermia occurred more frequently in infants treated with a bag and mattress, and more infants treated with a bag had admission temperatures 36.5-37.5°C. The use of exothermic mattresses in addition to polyethylene bags, particularly in younger, smaller newborns, may result in more hypothermia and hyperthermia on admission. A randomised controlled trial is necessary to determine which strategy results in more infants having admission temperatures in the normal range. © 2011 The Author(s)/Acta Paediatrica © 2011 Foundation Acta Paediatrica.

  13. Does a foamy-block mattress system prevent pressure sores ? A prospective randomised clinical trial in 1729 patients.

    Science.gov (United States)

    Berthe, J V; Bustillo, A; Mélot, C; de Fontaine, S

    2007-01-01

    Pressure ulcers are a frequent complication of bed rest. The development of an efficient and low cost pressure relieving system for the prevention of bed-sores would be of considerable hospital health and economic interest. Our study was designed to determine the effectiveness in pressure-sore prevention of an interface pressure-decreasing mattress, the Kliniplot mattress, used in our institution since 1978. In a prospective randomised controlled 7-month clinical trial we compared the Kliniplot mattress with our standard hospital mattress in 1729 patients admitted to medical and surgical departments (neurology, cardiology, oncology-haematology, neurosurgery, thoracic surgery and orthopaedic surgery). Two groups (Klinipot mattress and standard hospital mattress) were monitored for the prevention of pressure sores. The patients were evaluated on a daily basis from their admission until the eventual occurrence of a bed-sore. Patients' characteristics and pressure-sore risk factors were similar at the baseline in both groups. Patients presenting with a pressure sore at the time of admission were excluded. Forty-two of the 1729 patients (2.4%) who entered the study developed at least one pressure sore. Twenty-one of the 657 patients (3.2%) nursed on the Kliniplot mattress, and 21 of the 1072 patients (1.9%) on the standard mattress developed bed-sores (p = 0.154). The median time for the occurrence of pressure sores was 31 days (range 6-87) with the Kliniplot mattress and 18 days (range 2 to 38) with the standard mattress (p sores using the modified Ek's scale were no different at the baseline between both groups (p = 0.764). The severity of the pressure sores was no different between both groups (p = 0.918). Our results show that the occurrence of pressure sores is not reduced but is delayed when patients are nursed on a Kliniplot pressure-decreasing mattress.

  14. Sterilization using ozone-ion gas sterilization using ozone-ion gas for mattresses used by the elderly; Ozone ion kunjoho ni kansuru kenkyu. Ozone ion kunjoho no zaitaku kaigoyo mattress mekkin eno oyo

    Energy Technology Data Exchange (ETDEWEB)

    Mikami, H.; Suzuki, A.; Hamasaki, H. [Shinryo Corp., Tokyo (Japan); Ishikawa, S.; Miyata, M.; Nanba, T. [Kitasato Univ., Tokyo (Japan); Sueyoshi, K. [Mitsubishi Research Institute Inc., Tokyo (Japan)

    1999-05-25

    The new generation of Japanese is facing an aging society: the number of young people is decreasing dramatically, while the number of elderly is increasing. Consequently, care for the elderly has become a big problem. One particular problem area we`ve investigated is the use of unclean mattresses by the bedridden elderly. These mattresses provide an all too excellent environments for the growth of microbes. We measured the density of microbes on the cover of mattresses at 775cfu/cm{sup 2} and in the bed filling at 136cfu/g. The dominant species of microbes were MRSA and Bacillus. We used MRSA, Bacillus subtilis and Escherichia coli as biological indicators and tested whether our system using ozone-ion fumigants was applicable for sterilization of mattresses. The survival ratio of MRSA were 10{sup -8} {approx} 10{sup -9}, 10{sup -7} {approx} 10{sup -8} for B. subtilis and below 10{sup -8} for E. coli. These experiments made it clear that our system is applicable for sterilization of the mattresses used by bedfast elderly. (author)

  15. Evaluation of free-stall mattress bedding treatments to reduce mastitis bacterial growth

    Energy Technology Data Exchange (ETDEWEB)

    Kristula, M A; Dou, Z; Toth, J D; Smith, B I; Harvey, N; Sabo, M [University of Penn, Kennett Square, PA (United States)

    2008-05-15

    Bacterial counts were compared in free-stall mattresses and teat ends exposed to 5 treatments in a factorial study design on 1 dairy farm. Mattresses in five 30-cow groups were subjected to 1 of 5 bedding treatments every other day: 0.5 kg of hydrated limestone, 120 mL of commercial acidic conditioner, 1 kg of coal fly ash, 1 kg of kiln-dried wood shavings, and control (no bedding). Counts of coliforms, Klebsiella spp., Escherichia coli, and Streptococcus spp. were lowest on mattresses bedded with lime. Mattresses bedded with the commercial acidic conditioner had the next lowest counts for coliforms, Klebsiella spp., and Streptococcus spp. Wood shavings and the no-bedding control had the highest counts for coliform and Klebsiella spp. Compared with wood shavings or control, fly ash reduced the counts of coliforms, whereas for the other 3 bacterial groups, the reduction was not always significant. Streptococcus spp. counts were greatest in the control group and did not differ among the shavings and fly ash groups. Teat swab results indicated that hydrated lime was the only bedding treatment that significantly decreased the counts of both coliforms and Klebsiella spp. There were no differences in Streptococcus spp. numbers on the teats between any of the bedding treatments. Bacterial populations grew steadily on mattresses and were generally higher at 36 to 48 h than at 12 to 24 h, whereas bacterial populations on teats grew rapidly by 12 h and then remained constant. Hydrated lime was the only treatment that significantly reduced bacterial counts on both mattresses and teat ends, but it caused some skin irritation.

  16. Bedding on geotextile mattresses: how much is needed to improve cow comfort?

    Science.gov (United States)

    Tucker, C B; Weary, D M

    2004-09-01

    The objective of our study was to evaluate how the amount of sawdust bedding on mattresses affects dairy cattle behavior and preferences. Eleven nonlactating, multiparous cows were housed individually in pens with access to 3 free stalls. Each stall was fitted with a geotextile mattress covered with either 0, 1, or 7.5 kg of kiln-dried sawdust. The experiment began with 7 d of acclimatization to all 3 stalls. Cows were then allowed access to only 1 of the 3 stalls at a time, each for 3 d (restriction phase). At the end of this restriction phase, cows were allowed free access to all 3 stalls for 3 d (free-choice phase). Time spent lying and the number of lying bouts increased significantly with the amount of bedding, from 12.3 +/- 0.53 h lying and 8.5 +/- 0.62 bouts per 24 h on bare mattresses to 13.8 +/- 0.53 h lying and 10.0 +/- 0.62 bouts per 24 h on mattresses with 7.5 kg of sawdust. In addition, the animals spent less time standing with only the front hooves in the stalls when more sawdust was present. When allowed free access to all 3 options, all 11 animals spent a majority of their time lying and standing in the 7.5-kg option. In conclusion, cows preferred mattresses bedded with 7.5 kg of sawdust, on which they spent more time lying down and less time standing with only the front hooves in stalls. These results indicate that more sawdust bedding improves cow comfort in stalls with geotextile mattresses.

  17. Research on the relationship between the structural properties of bedding layer in spring mattress and sleep quality.

    Science.gov (United States)

    Shen, Liming; Chen, Yu-xia; Guo, Yong; Zhong, ShiLu; Fang, Fei; Zhao, Jing; Hu, Tian-Yi

    2012-01-01

    Mattress, as a sleep platform, its types and physical properties has an important effect on sleep quality and rest efficiency. In this paper, by subjective evaluations, analysis of sleeping behaviors and tests of depth of sleep, the relationship between characteristics of the bedding materials, the structure of mattress, sleep quality and sleep behaviors were studied. The results showed that: (1) Characteristics of the bedding materials and structure of spring mattress had a remarkable effect on sleep behaviors and sleep quality. An optimum combination of the bedding materials, the structure of mattress and its core could improve the overall comfort of mattress, thereby improving the depth of sleep and sleep quality. (2) Sleep behaviors had a close relationship with sleeping postures and sleep habits. The characteristics of sleep behaviors vary from person to person.

  18. Manual cleaning of hospital mattresses: an observational study comparing high- and low-resource settings.

    Science.gov (United States)

    Hopman, J; Hakizimana, B; Meintjes, W A J; Nillessen, M; de Both, E; Voss, A; Mehtar, S

    2016-01-01

    Hospital-associated infections (HAIs) are more frequently encountered in low- than in high-resource settings. There is a need to identify and implement feasible and sustainable approaches to strengthen HAI prevention in low-resource settings. To evaluate the biological contamination of routinely cleaned mattresses in both high- and low-resource settings. In this two-stage observational study, routine manual bed cleaning was evaluated at two university hospitals using adenosine triphosphate (ATP). Standardized training of cleaning personnel was achieved in both high- and low-resource settings. Qualitative analysis of the cleaning process was performed to identify predictors of cleaning outcome in low-resource settings. Mattresses in low-resource settings were highly contaminated prior to cleaning. Cleaning significantly reduced biological contamination of mattresses in low-resource settings (P cleaning in both the high- and low-resource settings seemed comparable. Cleaning with appropriate type of cleaning materials reduced the contamination of mattresses adequately. Predictors for mattresses that remained contaminated in a low-resource setting included: type of product used, type of ward, training, and the level of contamination prior to cleaning. In low-resource settings mattresses were highly contaminated as noted by ATP levels. Routine manual cleaning by trained staff can be as effective in a low-resource setting as in a high-resource setting. We recommend a multi-modal cleaning strategy that consists of training of domestic services staff, availability of adequate time to clean beds between patients, and application of the correct type of cleaning products. Copyright © 2015 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

  19. Use of backboard and deflation improve quality of chest compression when cardiopulmonary resuscitation is performed on a typical air inflated mattress configuration.

    Science.gov (United States)

    Oh, Jaehoon; Kang, Hyunggoo; Chee, Youngjoon; Lim, Taeho; Song, Yeongtak; Cho, Youngsuk; Je, Sangmo

    2013-02-01

    No study has examined the effectiveness of backboards and air deflation for achieving adequate chest compression (CC) depth on air mattresses with the typical configurations seen in intensive care units. To determine this efficacy, we measured mattress compression depth (MCD, mm) on these surfaces using dual accelerometers. Eight cardiopulmonary resuscitation providers performed CCs on manikins lying on 4 different surfaces using a visual feedback system. The surfaces were as follows: A, a bed frame; B, a deflated air mattress placed on top of a foam mattress laid on a bed frame; C, a typical air mattress configuration with an inflated air mattress placed on a foam mattress laid on a bed frame; and D, C with a backboard. Deflation of the air mattress decreased MCD significantly (B; 14.74 ± 1.36 vs C; 30.16 ± 3.96, P deflation of the air mattress decreased MCD more than use of a backboard (B; 14.74 ± 1.36 vs D; 25.46 ± 2.89, P = 0.002). The use of a both a backboard and a deflated air mattress in this configuration reduces MCD and thus helps achieve accurate CC depth during cardiopulmonary resuscitation.

  20. Emission of phthalates and phthalate alternatives from vinyl flooring and crib mattress covers: the influence of temperature.

    Science.gov (United States)

    Liang, Yirui; Xu, Ying

    2014-12-16

    Emissions of phthalates and phthalate alternatives from vinyl flooring and crib mattress covers were measured in a specially designed chamber. The gas-phase concentrations versus time were measured at four different temperatures, that is, 25, 36, 45, and 55 °C. The key parameter that controls the emissions (y0, gas-phase concentration in equilibrium with the material phase) was determined, and the emissions were found to increase significantly with increasing temperature. Both the material-phase concentration (C0) and the chemical vapor pressure (Vp) were found to have great influence on the value of y0. The measured ratios of C0 to y0 were exponentially proportional to the reciprocal of temperature, in agreement with the van't Hoff equation. A emission model was validated at different temperatures, with excellent agreement between model calculations and chamber observations. In residential homes, an increase in the temperature from 25 to 35 °C can elevate the gas-phase concentration of phthalates by more than a factor of 10, but the total airborne concentration may not increase that much for less volatile compounds. In infant sleep microenvironments, an increase in the temperature of mattress can cause a significant increase in emission of phthalates from the mattress cover and make the concentration in the infant's breathing zone about four times higher than that in the bulk room air, resulting in potentially high exposure.

  1. Food allergens in mattress dust in Norwegian homes - a potentially important source of allergen exposure.

    Science.gov (United States)

    Bertelsen, R J; Faeste, C K; Granum, B; Egaas, E; London, S J; Carlsen, K-H; Lødrup Carlsen, K C; Løvik, M

    2014-01-01

    Sensitization to food allergens and food allergic reactions are mostly caused by ingesting the allergen, but can also occur from exposure via the respiratory tract or the skin. Little is known about exposure to food allergens in the home environment. The objective of this study was firstly to describe the frequency of detection of allergens from fish, egg, milk, and peanut in mattress dust collected from homes of 13-year-old adolescents and secondly to identify home characteristics associated with the presence of food allergen contamination in dust. Food allergens were measured by dot blot analysis in mattress dust from 143 homes in Oslo, Norway. We analysed associations between home characteristics (collected by parental questionnaires and study technicians) and food allergens by multivariate regression models. Fish allergen was detected in 46%, peanut in 41%, milk in 39%, and egg allergen in 22% of the mattress dust samples; only three samples contained none of these allergens. All four food allergens were more frequently detected in mattresses in small dwellings (Food allergens occurred frequently in beds in Norwegian homes, with dwelling size and proximity of kitchen and bedroom as the most important determinants. Due to the amount of time children spent in the bedroom, mattress dust may be an important source of exposure to food allergens. © 2013 John Wiley & Sons Ltd.

  2. Microcontrolled air-mattress for ulcer by pressure prevention

    Science.gov (United States)

    Pasluosta, Cristian F.; Fontana, Juan M.; Beltramone, Diego A.; Taborda, Ricardo A. M.

    2007-11-01

    An ulcer by pressure is produced when a constant pressure is exerted over the skin. This generates the collapse of the blood vessels and, therefore, a lack in the contribution of the necessary nutrients for the affected zone. As a consequence, the skin deteriorates, eventually causing an ulcer. In order to prevent it, a protocol must be applied to the patient, which is reflected on time and cost of treatment. There are some air mattresses available for this purpose, but whose performance does not fulfill all requirements. The prototype designed in our laboratory is based on the principle of the air mattress. Its objective is to improve on existing technologies and, due to an increased automation, reduce time dedication for personnel in charge of the patient. A clinical experience was made in the local Emergencies Hospital and also in an institution dedicated to aged patients care. In both cases, the results obtained and the comments from the personnel involved were favorable.

  3. Microcontrolled air-mattress for ulcer by pressure prevention

    International Nuclear Information System (INIS)

    Pasluosta, Cristian F; Fontana, Juan M; Beltramone, Diego A; Taborda, Ricardo A M

    2007-01-01

    An ulcer by pressure is produced when a constant pressure is exerted over the skin. This generates the collapse of the blood vessels and, therefore, a lack in the contribution of the necessary nutrients for the affected zone. As a consequence, the skin deteriorates, eventually causing an ulcer. In order to prevent it, a protocol must be applied to the patient, which is reflected on time and cost of treatment. There are some air mattresses available for this purpose, but whose performance does not fulfill all requirements. The prototype designed in our laboratory is based on the principle of the air mattress. Its objective is to improve on existing technologies and, due to an increased automation, reduce time dedication for personnel in charge of the patient. A clinical experience was made in the local Emergencies Hospital and also in an institution dedicated to aged patients care. In both cases, the results obtained and the comments from the personnel involved were favorable

  4. Microcontrolled air-mattress for ulcer by pressure prevention

    Energy Technology Data Exchange (ETDEWEB)

    Pasluosta, Cristian F; Fontana, Juan M; Beltramone, Diego A; Taborda, Ricardo A M [Universidad Nacional de Cordoba. Cordoba (Argentina)

    2007-11-15

    An ulcer by pressure is produced when a constant pressure is exerted over the skin. This generates the collapse of the blood vessels and, therefore, a lack in the contribution of the necessary nutrients for the affected zone. As a consequence, the skin deteriorates, eventually causing an ulcer. In order to prevent it, a protocol must be applied to the patient, which is reflected on time and cost of treatment. There are some air mattresses available for this purpose, but whose performance does not fulfill all requirements. The prototype designed in our laboratory is based on the principle of the air mattress. Its objective is to improve on existing technologies and, due to an increased automation, reduce time dedication for personnel in charge of the patient. A clinical experience was made in the local Emergencies Hospital and also in an institution dedicated to aged patients care. In both cases, the results obtained and the comments from the personnel involved were favorable.

  5. Mapping Emplaced Articulated Concrete Mattress Using Geoelectrical and Electromagnetic Techniques

    National Research Council Canada - National Science Library

    Sjostrom, Keith

    1998-01-01

    Articulated concrete mattresses (ACM) are structures placed parallel to the river current for the purpose of stabilizing the concave banks in river bends, reduce the effects of erosion, and maintain the river channel...

  6. The effect of human-mattress interface's temperature on perceived thermal comfort.

    Science.gov (United States)

    Califano, R; Naddeo, A; Vink, P

    2017-01-01

    In recent years, methods that allow for an objective evaluation of perceived comfort, in terms of postural, physiological, cognitive and environmental comfort, have received a great deal of attention from researchers. This paper focuses on one of the factors that influences physiological comfort perception: the temperature difference between users and the objects with which they interact. The first aim is to create a measuring system that does not affect the perceived comfort during the temperatures' acquisition. The main aim is to evaluate how the temperature at the human-mattress interface can affect the level of perceived comfort. A foam mattress has been used for testing in order to take into account the entire back part of the human body. The temperature at the interface was registered by fourteen 100 Ohm Platinum RTDs (Resistance Temperature Detectors) placed on the mattress under the trunk, the shoulders, the buttocks, the legs, the thighs, the arms and the forearms of the test subject. 29 subjects participated in a comfort test in a humidity controlled environment. The test protocol involved: dress-code, anthropometric-based positioning on mattress, environment temperature measuring and an acclimatization time before the test. At the end of each test, each of the test subject's thermal sensations and the level of comfort perception were evaluated using the ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers) scale. The data analyses concerned, in the first instance, correlations between the temperature at the interface and comfort levels of the different parts of the body. Then the same analyses were performed independently of the body parts being considered. The results demonstrated that there was no strong correlation among the studied variables and that the total increase of temperature at interface is associated with a reduction in comfort. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. The Impact of Legislation on Gas Can- and Mattress-Related Burn Injuries.

    Science.gov (United States)

    Kellogg, Levi; Butcher, Brandon; Peek-Asa, Corinne; Wibbenmeyer, Lucy

    2018-01-01

    Burn prevention program success requires thorough evaluation of intervention outcomes. The impact of 2 engineering-specific burn prevention regulations, the Children's Gasoline Burn Prevention Act and the Standard for the Flammability of Mattress Sets, will be assessed. Records from 1997 to 2015 within the Consumer Product Safety Commission's (CPSC) National Electronic Injury Surveillance System (NEISS) were reviewed. After identifying gas can- and mattress-involved burn injuries, injury incidence was estimated by utilizing survey sampling weights associated with each record. Logistic regression, incorporating estimated injury incidence and adjusting for gender and age, was performed to test for change in injury risk following these regulations. Within NEISS, there were 493 burns involving gas cans, yielding an estimated 19,339 injuries (95% confidence interval [CI], 15,781-22,896) during the 19-year study period. The odds of a gas can burn injury after legislation decreased by 67% for children younger than 5 years (odds ratio [OR], 0.33; 95% CI, 0.16-0.66; P = 0.0018). There was no significant change in risk for persons 5 years and older (OR, 1.07; 95% CI, 0.80-1.41; P = 0.66). During the same time, there were 219 NEISS burns involving mattresses, yielding an estimated 6864 injuries (95% CI, 5071-8658). The odds of a mattress burn injury following legislation enactment decreased by 31% for all ages (OR, 0.69; 95% CI, 0.51-0.94; P = 0.02). Both regulations decreased the odds of injury in their target populations. This study demonstrates that passive interventions involving engineering standards remain a powerful tool for burn prevention and should be the focus of future efforts to improve burn care.

  8. A study of the behaviour of and the forces in a bed protecting mattress : The falling apron

    NARCIS (Netherlands)

    Vrijling, J.K.; Ravenstijn, P.

    2001-01-01

    In many cases the bottom around a structure that is exposed to current has to be protected by a mattress. The purpose of the mattress is to protect the soil besides the structure from erosion and scour, thus preserving the strength of the foundation of the structure. Examples are the bottom

  9. The impact of compliant surfaces on in-hospital chest compressions: effects of common mattresses and a backboard.

    NARCIS (Netherlands)

    Noordergraaf, G.J.; Paulussen, I.W.; Venema, A.; Berkom, P.F. van; Woerlee, P.H.; Scheffer, G.J.; Noordergraaf, A.

    2009-01-01

    PURPOSE: To evaluate, in a hospital setting, the influence of different, common mattresses, with and without a backboard, on chest movement during CPR. DESIGN AND SETTING: Sixty CPR sessions (140s each, 30:2, C:R ratio 1:1) were performed using a manikin on standard hospital mattresses, with or

  10. Trial of a novel plasma gas disinfection system (Radica) to reduce mattress residual bacterial contamination in the acute hospital setting: a preliminary study.

    Science.gov (United States)

    Shiely, F; Fallon, D; Casey, C; Kerins, D M; Eustace, J A

    2017-02-01

    In routine clinical practice, mattresses are manually cleaned using specialised cleaning and high-level disinfecting fluids. While effective against a wide range of organisms, the success of this approach is dependent on a thorough and complete application and is likely to be susceptible to human error and thus variable. The efficacy of available infection control measures to reduce such mattress contamination is unknown as it is not subject to quality control measures. There is a pressing need to identify more effective methods to prevent cross contamination within the medical environment, given the lack of available treatment strategies. The purpose of this study is to investigate the ability of a new technology, gaseous technology, to reduce colonization levels, compared to standard cleaning, and so attenuate superficial nosocomial infections. We conducted a prospective, single-centre, open-label, non-randomized trial with blinded outcome assessments, comparing the standard cleaning of hospital mattresses with a novel plasma based disinfection system Radica™, followed by a standard post-cleaning culturing protocol (five swabs/mattress). The median (interquartile range) maximal colony count per mattress for the 20 Radica versus 7 routinely cleaned mattresses was 1 (1-2.7) versus Too-Numerous-to-Count (TNTC) (32-TNTC), respectively, p = 0.002. Of the 20 Radica™ treated mattresses, 12 (60 %) had no positive culture result while all of the standard cleaned mattresses had at least two positive cultures. The plasma based Radica disinfection system reduces mattress bacterial colonization levels as compared to routine cleaning. This is a potentially important technology in the health care system to reduce surface colonisation and hence nosocomial infections.

  11. 16 CFR Figure 8 to Part 1633 - Jig for Setting Mattresses and Foundation Sides in Same Plane

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Jig for Setting Mattresses and Foundation Sides in Same Plane 8 Figure 8 to Part 1633 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION.... 8 Figure 8 to Part 1633—Jig for Setting Mattresses and Foundation Sides in Same Plane ER15MR06.007 ...

  12. Multicenter comparison of the efficacy on prevention of pressure ulcer in postoperative patients between two types of pressure-relieving mattresses in China

    Science.gov (United States)

    Jiang, Qixia; Li, Xiaohua; Zhang, Aiqin; Guo, Yanxia; Liu, Yahong; Liu, Haiying; Qu, Xiaolong; Zhu, Yajun; Guo, Xiujun; Liu, Li; Zhang, Liyan; Bo, Suping; Jia, Jing; Chen, Yuejuan; Zhang, Rui; Wang, Jiandong

    2014-01-01

    Objective: Present study is designed to evaluate the effects of preventing pressure ulcer in surgical patients with two types of pressure-relieving mattresses. Methods: 1074 surgical patients from 12 hospitals in China were divided into A group (static air mattress with repositioning every 2 hours, n = 562) and B group (power pressure air mattress with repositioning every 2 hours, n = 512). The patient was subjected to a pressure-relieving mattress and observed from 0-5 days after surgery. Indications include the Braden scores, hospital-acquired pressure ulcers (HAPU) incidence and stage. Results: The Braden scores between two groups in five days after surgery were no significant (P > 0.05). The incidence of HAPU between two groups in same days also was no significant (1.07% vs. 0.98%, P > 0.05). The incidence of Stage I and stage II pressure ulcers in group A and B were 1.07% (6/562) and 0.98% (5/512), respectively (χ2 = 0.148, P = 0.882). Conclusion: The effects of preventing pressure ulcer in surgical patients with two types of pressure-relieving mattresses are similar, but the protocol by static air mattress with repositioning every 2 hours is benefit when no power. PMID:25356144

  13. An Enhanced Sensing Application Based on a Flexible Projected Capacitive-Sensing Mattress

    Directory of Open Access Journals (Sweden)

    Wen-Ying Chang

    2014-04-01

    Full Text Available This paper presents a cost-effective sensor system for mattresses that can classify the sleeping posture of an individual and prevent pressure ulcers. This system applies projected capacitive sensing to the field of health care. The charge time (CT method was used to sensitively and accurately measure the capacitance of the projected electrodes. The required characteristics of the projected capacitor were identified to develop large-area applications for sensory mattresses. The area of the electrodes, the use of shielding, and the increased length of the transmission line were calibrated to more accurately measure the capacitance of the electrodes in large-size applications. To offer the users comfort in the prone position, a flexible substrate was selected and covered with 16 × 20 electrodes. Compared with the static charge sensitive bed (SCSB, our proposed system-flexible projected capacitive-sensing mattress (FPCSM comes with more electrodes to increase the resolution of posture identification. As for the body pressure system (BPS, the FPCSM has advantages such as lower cost, higher aging-resistance capability, and the ability to sense the capacitance of the covered regions without physical contact. The proposed guard ring design effectively absorbs the noise and interrupts leakage paths. The projected capacitive electrode is suitable for proximity-sensing applications and succeeds at quickly recognizing the sleeping pattern of the user.

  14. A quantitative analysis of microcirculation in sore-prone pressure areas on conventional and pressure relief hospital mattresses using laser Doppler flowmetry and tissue spectrophotometry.

    Science.gov (United States)

    Rothenberger, Jens; Krauss, Sabrina; Held, Manuel; Bender, Dominik; Schaller, Hans-Eberhard; Rahmanian-Schwarz, Afshin; Constantinescu, Mihai Adrian; Jaminet, Patrick

    2014-11-01

    Pressure ulcers are associated with severe impairment for the patients and high economic load. With this study we wanted to gain more insight to the skin perfusion dynamics due to external loading. Furthermore, we evaluated the effect of different types of pressure relief mattresses. A total of 25 healthy volunteers were enrolled in the study. Perfusion dynamics of the sacral and the heel area were assessed using the O2C-device, which combines a laser light, to determine blood flow, and white light to determine the relative amount of hemoglobin. Three mattresses were evaluated compared to a hard surface: a standard hospital foam mattress bed, a visco-elastic foam mattress, and an air-fluidized bed. In the heel area, only the air-fluidized bed was able to maintain the blood circulation (mean blood flow of 13.6 ± 6 versus 3.9 ± 3 AU and mean relative amount of hemoglobin of 44.0 ± 14 versus 32.7 ± 12 AU.) In the sacral area, all used mattresses revealed an improvement of blood circulation compared to the hard surface. The results of this study form a more precise pattern of perfusion changes due to external loading on various pressure relief mattresses. This knowledge may reduce the incidence of pressure ulcers and may be an influencing factor in pressure relief mattress selection. Copyright © 2014 Tissue Viability Society. Published by Elsevier Ltd. All rights reserved.

  15. A retrospective study to determine the incidence of pressure ulcers in burn patients using an alternating pressure mattress.

    Science.gov (United States)

    Still, Joseph M; Wilson, Joan; Rinker, Connie; Law, Edward; Craft-Coffman, Beretta

    2003-08-01

    In immobilized patients, unrelieved pressure can create decubitus ulcers over bony prominences. Those burn patients who require prolonged bed rest, are prone to the development of such problems. Various methods of reducing pressure on these areas, including frequent turning and the use of air fluidized and low air loss beds, have been adopted to attempt to prevent the development of this complication. The Pegasus Renaissance alternating pressure mattress is such a device, intended to reduce the incidence of decubitus ulcers. It was introduced at our burn unit and evaluated over a 29-month period. During the study period, 186 (13.4%) of 1390 acutely burned patients, believed to be at high risk for the development of decubiti, were placed on this mattress. Other patients were treated in the standard hospital bed. Care was otherwise the same. No decubitus ulcers developed in any of the patients treated on the Pegasus Renaissance mattress.

  16. Biomechanical characteristics of the horizontal mattress stitch: implication for double-row and suture-bridge rotator cuff repair.

    Science.gov (United States)

    Tamboli, Mallika; Mihata, Teruhisa; Hwang, James; McGarry, Michelle H; Kang, Yangmi; Lee, Thay Q

    2014-03-01

    We investigated the effects of bite-size horizontal mattress stitch (distance between the limbs passed through the tendon) on the biomechanical properties of the repaired tendon. We anchored 20 bovine Achilles tendons to bone using no. 2 high-strength suture and 5-mm titanium suture anchors in a mattress-suture technique. Tendons were allocated randomly into two groups of ten each to receive stitches with a 4- or 10-mm bite. Specimens underwent cyclic loading from 5 to 30 N at 1 mm/s for 30 cycles, followed by tensile testing to failure. Gap formation, tendon strain, hysteresis, stiffness, yield load, ultimate load, energy to yield load, and energy to ultimate load were compared between groups using unpaired t tests. The 4-mm group had less (p row repair, small mattress stitches provide a tighter repair, whereas large stitches are beneficial to prevent sutures from pulling through the tendon after surgery. For suture-bridge rotator cuff repair, large stitches are beneficial because the repaired tendon has a higher strength, and the slightly mobile medial knot can be tightened by lateral fixation.

  17. Geographical variation and the determinants of domestic endotoxin levels in mattress dust in Europe

    NARCIS (Netherlands)

    Chen, C.M.; Thiering, E.; Doekes, G.; Zock, J.P.; Bakolis, I.; Norbäck, D.; Sunyer, J.; Villani, S.; Verlato, G.; Täubel, M.; Jarvis, D.

    2012-01-01

    Endotoxin exposures have manifold effects on human health. The geographical variation and determinants of domestic endotoxin levels in Europe have not yet been extensively described. To investigate the geographical variation and determinants of domestic endotoxin concentrations in mattress dust in

  18. Finite element modeling for predicting the contact pressure between a foam mattress and the human body in a supine position.

    Science.gov (United States)

    Lee, Wookjin; Won, Byeong Hee; Cho, Seong Wook

    2017-01-01

    In this paper, we generated finite element (FE) models to predict the contact pressure between a foam mattress and the human body in a supine position. Twenty-year-old males were used for three-dimensional scanning to produce the FE human models, which was composed of skin and muscle tissue. A linear elastic isotropic material model was used for the skin, and the Mooney-Rivlin model was used for the muscle tissue because it can effectively represent the nonlinear behavior of muscle. The contact pressure between the human model and the mattress was predicted by numerical simulation. The human models were validated by comparing the body pressure distribution obtained from the same human subject when he was lying on two different mattress types. The experimental results showed that the slope of the lower part of the mattress caused a decrease in the contact pressure at the heels, and the effect of bone structure was most pronounced in the scapula. After inserting a simple structure to function as the scapula, the contact pressure predicted by the FE human models was consistent with the experimental body pressure distribution for all body parts. These results suggest that the models proposed in this paper will be useful to researchers and designers of products related to the prevention of pressure ulcers.

  19. Multi-stage versus single-stage inflation and deflation cycle for alternating low pressure air mattresses to prevent pressure ulcers in hospitalised patients: a randomised-controlled clinical trial.

    Science.gov (United States)

    Demarré, L; Beeckman, D; Vanderwee, K; Defloor, T; Grypdonck, M; Verhaeghe, S

    2012-04-01

    The duration and the amount of pressure and shear must be reduced in order to minimize the risk of pressure ulcer development. Alternating low pressure air mattresses with multi-stage inflation and deflation cycle of the air cells have been developed to relieve pressure by sequentially inflating and deflating the air cells. Evidence about the effectiveness of this type of mattress in clinical practice is lacking. This study aimed to compare the effectiveness of an alternating low pressure air mattress that has a standard single-stage inflation and deflation cycle of the air cells with an alternating low pressure air mattress with multi-stage inflation and deflation cycle of the air cells. A randomised controlled trial was performed in a convenience sample of 25 wards in five hospitals in Belgium. In total, 610 patients were included and randomly assigned to the experimental group (n=298) or the control group (n=312). In the experimental group, patients were allocated to an alternating low pressure air mattress with multi-stage inflation and deflation cycle of the air cells. In the control group, patients were allocated to an alternating low pressure air mattress with a standard single-stage inflation and deflation cycle of the air cells. The outcome was defined as cumulative pressure ulcer incidence (Grade II-IV). An intention-to-treat analysis was performed. There was no significant difference in cumulative pressure ulcer incidence (Grade II-IV) between both groups (Exp.=5.7%, Contr.=5.8%, p=0.97). When patients developed a pressure ulcer, the median time was 5.0 days in the experimental group (IQR=3.0-8.5) and 8.0 days in the control group (IQR=3.0-8.5) (Mann-Whitney U-test=113, p=0.182). The probability to remain pressure ulcer free during the observation period in this trial did not differ significantly between the experimental group and the control group (log-rank χ(2)=0.013, df=1, p=0.911). An alternating low pressure air mattress with multi-stage inflation

  20. A retrospective study to determine the incidence of pressure ulcers in burn patients using a low air loss pressure relieving mattress.

    Science.gov (United States)

    Still, Joseph M; Wilson, Joan; Rinker, Connie; Law, Edward; Craft-Coffman, Beretta

    2003-06-01

    In immobilized patients, unrelieved pressure can create decubitus ulcers over bony prominences. Those burn patients who require prolonged bed rest, are prone to the development of such problems. Various methods of reducing pressure on these areas, including frequent turning and the use of air fluidized and low air loss beds, have been adopted to attempt to prevent the development of this complication. The Pegasus Renaissance alternating pressure mattress is such a device, intended to reduce the incidence of decubitus ulcers. It was introduced at our burn unit and evaluated over a 29-month period. During the study period, 186 (13.4%) of 1390 acutely burned patients, believed to be at high risk for the development of decubiti, were placed on this mattress. Other patients were treated in the standard hospital bed. Care was otherwise the same. No decubitus ulcers developed in any of the patients treated on the Pegasus Renaissance mattress.

  1. Dermatophagoides pteronyssinus (Trouessart, 1897) in mattress and floor dust in a temperate climate (Acari : Pyroglyphidae)

    NARCIS (Netherlands)

    Bronswijk, van J.E.M.H.

    1973-01-01

    The arthropod fauna of mattress dust, bedroom dust and living-room dust was sampled during a 1-year period in a center for asthmatic children (near Nijmegen, The Netherlands) with the aid of a vacuum cleaner, Berlese funnels and a flotation method. Dermatophagoides pteronyssinus was most abundant;

  2. A randomized trial of exothermic mattresses for preterm newborns in polyethylene bags.

    LENUS (Irish Health Repository)

    McCarthy, Lisa K

    2013-07-01

    Hypothermia on admission to the NICU is associated with increased mortality in preterm infants. Many newborns are hypothermic on admission despite using polyethylene bags (PBs). Using exothermic mattresses (EMs) in addition to PBs may reduce hypothermia but increase hyperthermia. We wished to determine whether placing preterm newborns in PBs on EMs in the DR results in more infants with rectal temperature outside the range 36.5 to 37.5°C on NICU admission.

  3. Effect of mattress and pillow encasings on children with asthma and house dust mite allergy

    DEFF Research Database (Denmark)

    Halken, Susanne; Høst, Arne; Niklassen, Ulla

    2003-01-01

    BACKGROUND: House dust mite (HDM) allergy is a frequent cause of allergic asthma in children. Reduction of exposure seems to be the most logical way to treat these patients. OBJECTIVE: Our aim was to investigate whether mattress and pillow encasings resulted in an effective long-term control of H...

  4. Allgöwer-Donati Versus Vertical Mattress Suture Technique Impact on Perfusion in Ankle Fracture Surgery: A Randomized Clinical Trial Using Intraoperative Angiography.

    Science.gov (United States)

    Shannon, Steven F; Houdek, Matthew T; Wyles, Cody C; Yuan, Brandon J; Cross, William W; Cass, Joseph R; Sems, Stephen A

    2017-02-01

    The purpose of this study was to evaluate which primary wound closure technique for ankle fractures affords the most robust perfusion as measured by laser-assisted indocyanine green angiography: Allgöwer-Donati or vertical mattress. Prospective, randomized. Level 1 Academic Trauma Center. Thirty patients undergoing open reduction internal fixation for ankle fractures were prospectively randomized to Allgöwer-Donati (n = 15) or vertical mattress (n = 15) closure. Demographics were similar for both cohorts with respect to age, sex, body mass index, surgical timing, and OTA/AO fracture classification. Skin perfusion (mean incision perfusion and mean perfusion impairment) was quantified in fluorescence units with laser-assisted indocyanine green angiography along the lateral incision as well as anterior and posterior to the incision at 30 separate locations. Minimum follow-up was 3 months with a mean follow-up 4.7 months. Allgöwer-Donati enabled superior perfusion compared with the vertical mattress suture technique. Mean incision perfusion for Allgöwer-Donati was 51 (SD = 13) and for vertical mattress was 28 (SD = 10, P ankle fractures. Theoretically, this may enhance soft tissue healing and decrease the risk of wound complications. Surgeons may take this into consideration when deciding closure techniques for ankle fractures. Therapeutic Level I. See Instructions for Authors for a complete description of levels of evidence.

  5. Matrigel Mattress: A Method for the Generation of Single Contracting Human-Induced Pluripotent Stem Cell-Derived Cardiomyocytes.

    Science.gov (United States)

    Feaster, Tromondae K; Cadar, Adrian G; Wang, Lili; Williams, Charles H; Chun, Young Wook; Hempel, Jonathan E; Bloodworth, Nathaniel; Merryman, W David; Lim, Chee Chew; Wu, Joseph C; Knollmann, Björn C; Hong, Charles C

    2015-12-04

    The lack of measurable single-cell contractility of human-induced pluripotent stem cell-derived cardiac myocytes (hiPSC-CMs) currently limits the utility of hiPSC-CMs for evaluating contractile performance for both basic research and drug discovery. To develop a culture method that rapidly generates contracting single hiPSC-CMs and allows quantification of cell shortening with standard equipment used for studying adult CMs. Single hiPSC-CMs were cultured for 5 to 7 days on a 0.4- to 0.8-mm thick mattress of undiluted Matrigel (mattress hiPSC-CMs) and compared with hiPSC-CMs maintained on a control substrate (method enables the rapid generation of robustly contracting hiPSC-CMs and enhances maturation. This new method allows quantification of contractile performance at the single-cell level, which should be valuable to disease modeling, drug discovery, and preclinical cardiotoxicity testing. © 2015 American Heart Association, Inc.

  6. The making and remaking of dismissed industrial sites

    NARCIS (Netherlands)

    Curulli, G.I.

    2014-01-01

    The Making and Remaking of Dismissed Industrial Sites examines the transformation of former industrial areas and the implications of the design of reuse with aesthetics, context, history and memory, public space and reclamation of contaminated soils. Through a critical investigation of these

  7. The primary factor for suture configuration at rotator cuff repair: Width of mattress or distance from tear edge

    Directory of Open Access Journals (Sweden)

    Onur Hapa

    2016-08-01

    Conclusion: Bite size from the edge of the tendon seems to be more important than the width of the mattress. The curve of the suture passing device may also have an effect on the strength of the suture tendon interface.

  8. Pressure ulcers prevention efficacy of an alternating pressure air mattress in elderly patients: E²MAO a randomised study.

    Science.gov (United States)

    Sauvage, P; Touflet, M; Pradere, C; Portalier, F; Michel, J-M; Charru, P; Passadori, Y; Fevrier, R; Hallet-Lezy, A-M; Beauchêne, F; Scherrer, B

    2017-06-02

    Our aim was to compare Axtair One, an alternating pressure air mattress (APAM), with a viscoelastic foam mattress (VFM) in elderly patients at moderate to high risk of developing pressure ulcers (PUs). A randomised, controlled, superiority, parallel-group, open-label, multicentre study, was conducted, between February 2012 and March 2015, in nine French, medium- and long-term stay facilities. Eligible patients were aged 70 and over, had no PUs on enrolment, were bedridden for at least 15 hours per day, had reduced mobility, an absent or minimal positioning capability, a Braden score 12 and a Karnofsky score elderly patients, bedridden for more than 15 hours per day, severely dependent, at moderate-to high-risk of PUs, with an instantaneous risk for the appearance of PUs 7.57 times greater in the VFM group than in the APAM group. This study provides descriptive information and evidence for practice.

  9. Oil industry decision making

    International Nuclear Information System (INIS)

    Collier, T.S.

    1992-01-01

    This paper reports that the oil and gas business is undergoing a significant restructuring. In order to maintain control of our own destiny and succeed in an increasingly competitive business environment, the industry must set goals which are consistent with its continued success and focus on those goals in every aspect of its strategic management. By applying an approach to decision making which focuses on the achievement of the key goals required for success at every decision point and systematic follow-up, a firm can greatly increase its ability to succeed in the business environment of the future

  10. Everyday Industry : Pragmatic approaches for integrating sustainability into industry decision making

    NARCIS (Netherlands)

    Peace, Amy; Ramirez, Andrea; Broeren, Martijn L.M.; Coleman, Nick; Chaput, Isabelle; Rydberg, Tomas; Sauvion, Guy Noel

    Many sustainability evaluation tools exist, but few are used on a day-to-day basis within the process industries to help project teams make better decisions regarding process and product improvements. This article presents collated experiences and views from the EU process sectors on the

  11. Effect evaluation of a heated ambulance mattress-prototype on thermal comfort and patients' temperatures in prehospital emergency care - an intervention study.

    Science.gov (United States)

    Aléx, Jonas; Karlsson, Stig; Björnstig, Ulf; Saveman, Britt-Inger

    2015-01-01

    Background The ambulance milieu does not offer good thermal comfort to patients during the cold Swedish winters. Patients' exposure to cold temperatures combined with a cold ambulance mattress seems to be the major factor leading to an overall sensation of discomfort. There is little research on the effect of active heat delivered from underneath in ambulance care. Therefore, the aim of this study was to evaluate the effect of an electrically heated ambulance mattress-prototype on thermal comfort and patients' temperatures in the prehospital emergency care. Methods A quantitative intervention study on ambulance care was conducted in the north of Sweden. The ambulance used for the intervention group (n=30) was equipped with an electrically heated mattress on the regular ambulance stretcher whereas for the control group (n=30) no active heat was provided on the stretcher. Outcome variables were measured as thermal comfort on the Cold Discomfort Scale (CDS), subjective comments on cold experiences, and finger, ear and air temperatures. Results Thermal comfort, measured by CDS, improved during the ambulance transport to the emergency department in the intervention group (p=0.001) but decreased in the control group (p=0.014). A significant higher proportion (57%) of the control group rated the stretcher as cold to lie down compared to the intervention group (3%, pthermal comfort and may prevent the negative consequences of cold stress.

  12. Effect evaluation of a heated ambulance mattress-prototype on thermal comfort and patients' temperatures in prehospital emergency care--an intervention study.

    Science.gov (United States)

    Aléx, Jonas; Karlsson, Stig; Björnstig, Ulf; Saveman, Britt-Inger

    2015-01-01

    The ambulance milieu does not offer good thermal comfort to patients during the cold Swedish winters. Patients' exposure to cold temperatures combined with a cold ambulance mattress seems to be the major factor leading to an overall sensation of discomfort. There is little research on the effect of active heat delivered from underneath in ambulance care. Therefore, the aim of this study was to evaluate the effect of an electrically heated ambulance mattress-prototype on thermal comfort and patients' temperatures in the prehospital emergency care. A quantitative intervention study on ambulance care was conducted in the north of Sweden. The ambulance used for the intervention group (n=30) was equipped with an electrically heated mattress on the regular ambulance stretcher whereas for the control group (n=30) no active heat was provided on the stretcher. Outcome variables were measured as thermal comfort on the Cold Discomfort Scale (CDS), subjective comments on cold experiences, and finger, ear and air temperatures. Thermal comfort, measured by CDS, improved during the ambulance transport to the emergency department in the intervention group (p=0.001) but decreased in the control group (p=0.014). A significant higher proportion (57%) of the control group rated the stretcher as cold to lie down compared to the intervention group (3%, pthermal comfort and may prevent the negative consequences of cold stress.

  13. The industry is making progress

    International Nuclear Information System (INIS)

    Steensen, Anders J.

    2004-01-01

    According to Statistics Norway, employment in the Norwegian industry is falling. During the last five years the reduction is 10.6 per cent. In the same period the contribution to the GNP increased by 6 billion NOK after passing a maximum in 2002. The operating result improved throughout the same period despite the high krone rate and high interest rate level up to 2003, inclusive, compared to the competing countries. One reason may be that the industry makes products that rise in value while countries such as Finland and Sweden have concentrated on goods that are strongly subject to price pressure. The industrial structure in Norway is different from that of the neighbouring countries. The population is small and the purchasing power has been relatively small until recently. Thus, large-scale industry with export of products for the consumer market has not been developed. Norwegian industry is essentially bound to the conditions inherent in nature: shipping, fishing, metal production, energy (hydroelectricity, oil and gas). Norwegian industry is internationally strong in all of these sectors. They have been developed over time, largely with foreign capital. The largest suppliers to the offshore oil and gas activities are owned by foreigners. The oil resources are in the hands of the state plus two Norwegian oil companies. Private owners are often too short of capital to expand abroad. The monetary policy is thought by some to be the Norwegian industry's most important competitive factor. The competitive power has improved. The authorities have succeeded in reducing the interest rate, thereby stabilizing the krone rate on a lower level relative to the euro while at the same time keeping the inflation at a minimum. Norwegian shipbuilding yards are once again winning contracts. Profitable Norwegian products embody a mass of advanced knowledge. Norwegian smelters have the most efficient production of ferro-alloys in the world. This is largely because the world

  14. A Comparison of Cervical Spine Motion After Immobilization With a Traditional Spine Board and Full-Body Vacuum-Mattress Splint.

    Science.gov (United States)

    Etier, Brian E; Norte, Grant E; Gleason, Megan M; Richter, Dustin L; Pugh, Kelli F; Thomson, Keith B; Slater, Lindsay V; Hart, Joe M; Brockmeier, Stephen F; Diduch, David R

    2017-12-01

    The National Athletic Trainers' Association (NATA) advocates for cervical spine immobilization on a rigid board or vacuum splint and for removal of athletic equipment before transfer to an emergency medical facility. To (1) compare triplanar cervical spine motion using motion capture between a traditional rigid spine board and a full-body vacuum splint in equipped and unequipped athletes, (2) assess cervical spine motion during the removal of a football helmet and shoulder pads, and (3) evaluate the effect of body mass on cervical spine motion. Controlled laboratory study. Twenty healthy male participants volunteered for this study to examine the influence of immobilization type and presence of equipment on triplanar angular cervical spine motion. Three-dimensional cervical spine kinematics was measured using an electromagnetic motion analysis system. Independent variables included testing condition (static lift and hold, 30° tilt, transfer, equipment removal), immobilization type (rigid, vacuum-mattress), and equipment (on, off). Peak sagittal-, frontal-, and transverse-plane angular motions were the primary outcome measures of interest. Subjective ratings of comfort and security did not differ between immobilization types ( P > .05). Motion between the rigid board and vacuum splint did not differ by more than 2° under any testing condition, either with or without equipment. In removing equipment, the mean peak motion ranged from 12.5° to 14.0° for the rigid spine board and from 11.4° to 15.4° for the vacuum-mattress splint, and more transverse-plane motion occurred when using the vacuum-mattress splint compared with the rigid spine board (mean difference, 0.14 deg/s [95% CI, 0.05-0.23 deg/s]; P = .002). In patients weighing more than 250 lb, the rigid board provided less motion in the frontal plane ( P = .027) and sagittal plane ( P = .030) during the tilt condition and transfer condition, respectively. The current study confirms similar motion in the

  15. Decision making in the digital age: the nuclear industry response

    Energy Technology Data Exchange (ETDEWEB)

    Edelman, G. [Energy Group, Kepner-Tregoe, Inc. (Canada)

    2002-07-01

    Ten years ago, the consequences of a prolonged outage - or of choosing a costly alternative - could usually be recovered from the ratepayers without major difficulty. But today, as in the rest of industrial America, poorly crafted decisions have very real economic consequences. This paper discusses the decision making process within the nuclear industry in the age of industry deregulation.

  16. Decision making in the digital age: the nuclear industry response

    International Nuclear Information System (INIS)

    Edelman, G.

    2002-01-01

    Ten years ago, the consequences of a prolonged outage - or of choosing a costly alternative - could usually be recovered from the ratepayers without major difficulty. But today, as in the rest of industrial America, poorly crafted decisions have very real economic consequences. This paper discusses the decision making process within the nuclear industry in the age of industry deregulation

  17. A Randomized, Crossover Trial of a Novel Sound-to-Sleep Mattress Technology in Children with Autism and Sleep Difficulties.

    Science.gov (United States)

    Frazier, Thomas W; Krishna, Jyoti; Klingemier, Eric; Beukemann, Mary; Nawabit, Rawan; Ibrahim, Sally

    2017-01-15

    This preliminary study investigated the tolerability and efficacy of a novel mattress technology-the Sound-To-Sleep (STS) system-in the treatment of sleep problems in children with autism. After screening, 45 children, ages 2.5 to 12.9 years, were randomized to order of mattress technology use (On-Off vs. Off-On). Treatment conditions (On vs. Off) lasted two weeks with immediate crossover. Tolerability, including study discontinuation and parent-report of mattress tolerance and ease of use, was tracked throughout the study. Efficacy assessments were obtained at baseline, prior to crossover, and end of study and included measures of autism traits, other psychopathology symptoms, sensory abnormalities, communication difficulties, quality of life, sleep diary parameters, and single-blinded actigraphy-derived sleep parameters. Statistical analyses evaluated differences in tolerability and efficacy when the STS system was on versus off. STS system use was well tolerated (n = 2, 4.4% dropout) and resulted in parent-reported sleep quality improvements (STS off mean = 4.3, 95% CI = 4.05-4.54 vs. on mean = 4.9, 95%CI = 4.67-5.14). The technology was described by parents as very easy to use and child tolerance was rated as good. Parent-diary outcomes indicated improvements in falling asleep and reduced daytime challenging behavior. Actigraphy-derived sleep parameters indicated improved sleep duration and sleep efficiency. Improvements in child and family quality of life were identified on parent questionnaires. A future large sample phase 2 trial of the STS system is warranted and would benefit from extended study duration, an objective primary efficacy outcome, and careful attention to methodological issues that promote compliance with the intervention and study procedures. © 2017 American Academy of Sleep Medicine

  18. Making Industry Part of the Climate Solution

    Energy Technology Data Exchange (ETDEWEB)

    Lapsa, Melissa Voss [ORNL; Brown, Dr. Marilyn Ann [Georgia Institute of Technology; Jackson, Roderick K [ORNL; Cox, Matthew [Georgia Institute of Technology; Cortes, Rodrigo [Georgia Institute of Technology; Deitchman, Benjamin H [ORNL

    2011-06-01

    Improving the energy efficiency of industry is essential for maintaining the viability of domestic manufacturing, especially in a world economy where production is shifting to low-cost, less regulated developing countries. Numerous studies have shown the potential for significant cost-effective energy-savings in U.S. industries, but the realization of this potential is hindered by regulatory, information, workforce, and financial obstacles. This report evaluates seven federal policy options aimed at improving the energy efficiency of industry, grounded in an understanding of industrial decision-making and the barriers to efficiency improvements. Detailed analysis employs the Georgia Institute of Technology's version of the National Energy Modeling System and spreadsheet calculations, generating a series of benefit/cost metrics spanning private and public costs and energy bill savings, as well as air pollution benefits and the social cost of carbon. Two of the policies would address regulatory hurdles (Output-Based Emissions Standards and a federal Energy Portfolio Standard with Combined Heat and Power); three would help to fill information gaps and workforce training needs (the Superior Energy Performance program, Implementation Support Services, and a Small Firm Energy Management program); and two would tackle financial barriers (Tax Lien Financing and Energy-Efficient Industrial Motor Rebates). The social benefit-cost ratios of these policies appear to be highly favorable based on a range of plausible assumptions. Each of the seven policy options has an appropriate federal role, broad applicability across industries, utilizes readily available technologies, and all are administratively feasible.

  19. Sustainability-Related Decision Making in Industrial Buildings: An AHP Analysis

    Directory of Open Access Journals (Sweden)

    Jesús Cuadrado

    2015-01-01

    Full Text Available Few other sectors have such a great impact on sustainability as the construction industry, in which concerns over the environmental dimension have been growing for some time. The sustainability assessment methodology presented in this paper is an AHP (Analytic Hierarchy Process based on Multicriteria Decision Making (MCDM and includes the main sustainability factors for consideration in the construction of an industrial building (environmental, economic, and social, as well as other factors that greatly influence the conceptual design of the building (employee safety, corporate image. Its simplicity is well adapted to its main objective, to serve as a sustainability-related decision making tool in industrial building projects, during the design stage. Accompanied by an economic valuation of the actions to be undertaken, this tool means that the most cost-effective solution may be selected from among the various options.

  20. Effect evaluation of a heated ambulance mattress-prototype on thermal comfort and patients’ temperatures in prehospital emergency care – an intervention study

    Directory of Open Access Journals (Sweden)

    Jonas Aléx

    2015-09-01

    Full Text Available Background: The ambulance milieu does not offer good thermal comfort to patients during the cold Swedish winters. Patients’ exposure to cold temperatures combined with a cold ambulance mattress seems to be the major factor leading to an overall sensation of discomfort. There is little research on the effect of active heat delivered from underneath in ambulance care. Therefore, the aim of this study was to evaluate the effect of an electrically heated ambulance mattress-prototype on thermal comfort and patients’ temperatures in the prehospital emergency care. Methods: A quantitative intervention study on ambulance care was conducted in the north of Sweden. The ambulance used for the intervention group (n=30 was equipped with an electrically heated mattress on the regular ambulance stretcher whereas for the control group (n=30 no active heat was provided on the stretcher. Outcome variables were measured as thermal comfort on the Cold Discomfort Scale (CDS, subjective comments on cold experiences, and finger, ear and air temperatures. Results: Thermal comfort, measured by CDS, improved during the ambulance transport to the emergency department in the intervention group (p=0.001 but decreased in the control group (p=0.014. A significant higher proportion (57% of the control group rated the stretcher as cold to lie down compared to the intervention group (3%, p<0.001. At arrival, finger, ear and compartment air temperature showed no statistical significant difference between groups. Mean transport time was approximately 15 minutes. Conclusions: The use of active heat from underneath increases the patients’ thermal comfort and may prevent the negative consequences of cold stress.

  1. Strategic information for industrial policy-making in developing countries

    International Nuclear Information System (INIS)

    Gonod, P.F.

    1990-05-01

    The practice shows that many crucial decisions for industrialization in developing countries have been taken based on incomplete information. For strategic decisions an incomplete information may have catastrophic consequences. The function of policy-making is defined as the process by which the information generated/or used in a particular context is reevaluated in a different context in order to formulate/or execute a policy of alternative decisions. It follows that the industrial information must be presented in such a manner to allow a reevaluation and alternative decisions. 30 notes

  2. Linking Effective Project Management to Business Strategy in Oil and Gas Industry through Decision-making Processes

    Science.gov (United States)

    Adeleke, Adeyinka

    The construction project in the oil and gas industry covers the entire spectrum of hydrocarbon production from the wellhead (upstream) to downstream facilities. In each of these establishments, the activities in a construction project include: consulting, studies, front-end engineering, detail engineering, procurement, program management, construction, installation, commissioning and start-up. Efficient management of each of the activities involved in construction projects is one of the driving forces for the successful completion of the project. Optimizing the crucial factors in project management during each phase of a project in an oil and gas industry can assist managers to maximize the use of available resources and drive the project to successful conclusions. One of these factors is the decision-making process in the construction project. Current research effort investigated the relationship between decision-making processes and business strategy in oil and gas industry using employee surveys. I recruited employees of different races, age group, genders, and years of experience in order understand their influence on the implementation of the decision-making process in oil and gas industry through a quantitative survey. Decision-making was assessed using five decision measures: (a) rational, (b) intuitive, (c) dependent, (d) avoidant, and (e) spontaneous. The findings indicated gender, age, years of work experience and job titles as primary variables with a negative relationship with decision-making approach for employees working in a major oil and gas industry. The study results revealed that the two most likely decision-making methods in oil and gas industry include: making a decision in a logical and systematic way and seek assistance from others when making a decision. Additionally, the two leading management approaches to decision-making in the oil and gas industry include: decision analysis is part of organization culture and management is committed to

  3. A Novel Repair Method for Radial Tears of the Medial Meniscus: Biomechanical Comparison of Transtibial 2-Tunnel and Double Horizontal Mattress Suture Techniques Under Cyclic Loading.

    Science.gov (United States)

    Bhatia, Sanjeev; Civitarese, David M; Turnbull, Travis Lee; LaPrade, Christopher M; Nitri, Marco; Wijdicks, Coen A; LaPrade, Robert F

    2016-03-01

    Complete radial tears of the medial meniscus have been reported to be functionally similar to a total meniscectomy. At present, there is no consensus on an ideal technique for repair of radial midbody tears of the medial meniscus. Prior attempts at repair with double horizontal mattress suture techniques have led to a reportedly high rate of incomplete healing or healing in a nonanatomic (gapped) position, which compromises the ability of the meniscus to withstand hoop stresses. A newly proposed 2-tunnel radial meniscal repair method will result in decreased gapping and increased ultimate failure loads compared with the double horizontal mattress suture repair technique under cyclic loading. Controlled laboratory study. Ten matched pairs of male human cadaveric knees (average age, 58.6 years; range, 48-66 years) were used. A complete radial medial meniscal tear was made at the junction of the posterior one-third and middle third of the meniscus. One knee underwent a horizontal mattress inside-out repair, while the contralateral knee underwent a radial meniscal repair entailing the same technique with a concurrent novel 2-tunnel repair. Specimens were potted and mounted on a universal testing machine. Each specimen was cyclically loaded 1000 times with loads between 5 and 20 N before experiencing a load to failure. Gap distances at the tear site and failure load were measured. The 2-tunnel repairs exhibited a significantly stronger ultimate failure load (median, 196 N; range, 163-212 N) than did the double horizontal mattress suture repairs (median, 106 N; range, 63-229 N) (P = .004). In addition, the 2-tunnel repairs demonstrated decreased gapping at all testing states (P meniscus significantly decrease the ability of the meniscus to dissipate tibiofemoral loads, predisposing patients to early osteoarthritis. Improving the ability to repair medial meniscal radial tears in a way that withstands cyclic loads and heals in an anatomic position could significantly

  4. Radiation technology helps China’s industries make water cleaner

    International Nuclear Information System (INIS)

    Jawerth, Nicole

    2015-01-01

    China is pursuing the use of radiation technology as part of its wastewater treatment methods to further efforts to manage industrial waste in an environmentally friendly way. “Treating the water that comes from our industries is very important, so we have been doing this for a long time. Now we want to become better at making our water cleaner,” said Jianlong Wang, Vice-President of the Institute of Nuclear and New Energy Technology (INET) at Tsinghua University in Beijing. “We are receiving a lot of support from the IAEA to use electron beam based technologies to help us get rid of various water pollutants that the other methods cannot do on their own.”

  5. Tobacco Industry interference in TAPS policy making in Bulgaria

    Directory of Open Access Journals (Sweden)

    Pavel P Antonov

    2017-05-01

    Full Text Available Tobacco industry (TI has a powerful grasp of politics and the media in Bulgaria, but there is limited knowledge of its methods and communication messages. To explore and analyse them, we are using a recent case from the policy advocacy practice of the Smoke-free Life Coalition, ENSP member in Bulgaria. A mixed social research methodology was employed, involving: a case study; qualitative content analysis of documented communication; ethnographic participant observation; and semi-structured interviews with TAPS advocacy campaigners, policy makers and TI representatives, in the action research tradition. The case study analyses TI reaction to a surprising proposal for a complete ban of tobacco advertising, promotion and sponsorship, submitted to Bulgaria’s Parliament in November 2016 – and consecutively withdrawn. Being involved in all stages of the case and present at meetings between TI and MPs enables the researchers to gather rich information and analyse it, to cast light on: the methods for successful interference with democratic decision making, applied by industry representatives; the specific communication messages and arguments they employ to suppress smoke-free legislation. The paper observes how TI speculates with the interests of different groups, affected by and involved in its operations, to successfully contradict health concerns voiced by MPs. Democratically elected representatives appear unable to uphold the social and health interests of their voters and succumb to TI priorities. The paper concludes that a pro-industry discourse, which favours corporate incomes over concerns for people’s health and life, dominates democratic decision making mechanisms in Bulgaria’s post-socialist political landscape. Funding The Union Against Tuberculosis and Lung Diseases

  6. Algorithm of choosing type of mechanical assembly production of instrument making enterprises of Industry 4.0

    Science.gov (United States)

    Zakoldaev, D. A.; Shukalov, A. V.; Zharinov, I. O.; Zharinov, O. O.

    2018-05-01

    The task of the algorithm of choosing the type of mechanical assembly production of instrument making enterprises of Industry 4.0 is being studied. There is a comparison of two project algorithms for Industry 3.0 and Industry 4.0. The algorithm of choosing the type of mechanical assembly production of instrument making enterprises of Industry 4.0 is based on the technological route analysis of the manufacturing process in a company equipped with cyber and physical systems. This algorithm may give some project solutions selected from the primary part or the auxiliary one of the production. The algorithm decisive rules are based on the optimal criterion.

  7. How big data analytics affect decision-making : A study of the newspaper industry

    OpenAIRE

    Björkman, Filip; Franco, Sebastian

    2017-01-01

    Big data analytics is a topic that is surrounded by a lot of enthusiasm and hype among both researchers and practitioners and is quickly being applied in different industries. The purpose of the thesis is to investigate the emerging technology of big data analytics and how it affects decision-making. In order to investigate this, we conducted empirical research in the newspaper industry, which is an industry that is going through a crisis with decreasing revenues, old business models collapsi...

  8. Improving policy making through government-industry policy learning: The case of a novel Swedish policy framework

    International Nuclear Information System (INIS)

    Stigson, Peter; Dotzauer, Erik; Yan Jinyue

    2009-01-01

    Climate change poses an unprecedented challenge for policy makers. This paper analyzes how industry sector policy expertise can contribute to improved policy making processes. Previous research has identified that policy making benefit by including non-governmental policy analysts in learning processes. Recent climate and energy policy developments, including amendments and the introduction of new initiatives, have rendered current policy regimes as novel to both governments and the industry. This increases business investment risk perceptions and may thus reduce the effectiveness and efficiency of the policy framework. In order to explore how government-industry policy learning can improve policy making in this context, this article studied the Swedish case. A literature survey analyzed how policy learning had been previously addressed, identifying that the current situation regarding novel policies had been overlooked. Interviews provided how industrial actors view Swedish policy implementation processes and participatory aspects thereof. The authors conclude that an increased involvement of the industry sector in policy design and management processes can be an important measure to improve the effectiveness and efficiency of climate and energy policies

  9. The Boardroom Perspective: How Does Energy Efficiency Policy Influence Decision Making in Industry?

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    This report delves into the major factors or driving forces that decision makers within a large industrial company take into account when deciding to make new investments - the so-called {sup b}oardroom perspective{sup .} The rationale for an individual company making an investment that will reduce energy consumption varies considerably and depends on a range of factors. This report explores those factors that influence companies to invest in energy savings and proposes a methodology to evaluate the effectiveness of a country's energy efficiency and greenhouse gas mitigation policies mix from this boardroom perspective. This paper is the product of collaboration between the IEA and the Institute of Industrial Productivity (IIP).

  10. A Case Study on Improving the Process of Desicion Making in Industrial Companies

    Directory of Open Access Journals (Sweden)

    Valdas Bernatavičius

    2011-02-01

    Full Text Available The article deals with small and medium-sized industrial enterprises and looks into problems about the process of decision making in order to optimize the cost of enterprises within critical financial times. The article focuses on the theoretical models for decision making and presents the analysis of metal processing company „X“ to disclose multiple factors that have an influence on successful processes of selecting and making decisions. The paper also describes the theoretical decision-making model for optimizing company's costs on the basis of which decision-making processes should be moved to e-environment which may assist in improving the overall decision-making procedures in small enterprises.Article in Lithuanian

  11. Making 'what works' work

    DEFF Research Database (Denmark)

    Plum, Maja

    2017-01-01

    and a mattress. As such, the paper shows how DR, as an evidence-based method, is established through concrete relations, rather than abstracted and universal principals. It argues that these relations stabilising DR are never enacted once and for all, but require continual work to be held together as a method...... that ‘works’....

  12. Industrial policy and technology diffusion : evidence from paper making machinery in Indonesia

    NARCIS (Netherlands)

    Dijk, van M.; Szirmai, A.

    2006-01-01

    In this paper, we analyze the diffusion and adoption of paper making machinery in the Indonesian pulp and paper industry, from 1923 till 2000. We develop a machine level index of technological sophistication (mach), which measures the technological distance of each paper machine to the world

  13. COST VOLUME PROFIT MODEL, THE BREAK -EVEN POINT AND THE DECISION MAKING PROCESS IN THE HOSPITALITY INDUSTRY

    Directory of Open Access Journals (Sweden)

    Scorte Carmen

    2010-12-01

    Full Text Available Management accounting and cost calculation in the hospitality industry is a pathless land. The prezent article is a starting point of a long scientific approach on the domain of the hospitality industry and on the managerial accounting in this area. Our intention is to put the spot light back on the thorny problem of applying Financial Accounting and specifically its implementation in the hospitality industry. One aim of this article is to provide a picture of CVP analysis in decision making with customizing the hospitality industry. To cope with the crisis period, the competition and to achieve the expected profits of the hospitality industry ,managers have the possibility to apply CVP analysis, one of the most simple and useful analytical tools. This paper will address the basic version of the CVP model, exemplifying the main indicators of the particular model for the hospitality industry that can help guide decision-making.

  14. Industrial policy and technology diffusion : evidence from paper making machinery in Indonesia

    NARCIS (Netherlands)

    Dijk, van M.; Szirmai, A.

    2005-01-01

    In this paper, we analyse the diffusion and adoption of paper making machinery in the Indonesian pulp and paper industry, from 1923 till 2000. The two main questions in this paper are: (1) What patterns of technology diffusion can be discerned in the Indonesian paper manufacturing sector? (2) What

  15. Decision-Making Methodologies for Reuse of Industrial Assets

    Directory of Open Access Journals (Sweden)

    J. Claver

    2018-01-01

    Full Text Available When there is a social consensus that industrial assets are in fact heritage elements of cultural interest, their conservation and reuse must be considered with approaches that offer greater guarantees and that prevent their exposure to aggressive actions. In order for this to materialise, many aspects must be included in the decision-making process, from the characteristics of an asset and its surroundings, to the valuable aspects that distinguish it and that must be protected. This study aims to develop tools that guide the decision-making process regarding the most appropriate activity for each specific case study. Multicriteria Decision Support Techniques are evaluated as adequate support to create a proposal that fulfils these objectives. Furthermore, the Analytic Hierarchy Process is adapted to develop methodologies for assessing both the heritage value and the most compatible uses according to the characteristics of the asset. Subsequently, they are connected and such considerations regarding the heritage value of the asset are incorporated into the final decision. The tools developed are then applied to a case study to test their performance, assess their usefulness, and identify possible applications and future developments.

  16. MULTIPLE CRITERIA DECISION MAKING APPROACH FOR INDUSTRIAL ENGINEER SELECTION USING FUZZY AHP-FUZZY TOPSIS

    OpenAIRE

    Deliktaş, Derya; ÜSTÜN, Özden

    2018-01-01

    In this study, a fuzzy multiple criteria decision-making approach is proposed to select an industrial engineer among ten candidates in a manufacturing environment. The industrial engineer selection problem is a special case of the personal selection problem. This problem, which has hierarchical structure of criteria and many decision makers, contains many criteria. The evaluation process of decision makers also includes ambiguous parameters. The fuzzy AHP is used to determin...

  17. Yearbook of the brick-making industry 1984. Ziegeleitechnisches Jahrbuch 1984

    Energy Technology Data Exchange (ETDEWEB)

    Schellbach, G

    1984-01-01

    The following problems of the field of brick baking technology are discussed: 1. Structure of the brick-making industry of West Germany; 2. Waste recovery and utilisation; 3. Tunnel furnace processes (projecting and optimisation; 4. Light mortar; 5. Interdependences between passive use of solar energy, heat storage capacity of a building, heating energy consumption and room climate; 6. Research activities of the Institut fuer Ziegelforschung Essen e.V.; 7. Pore structure for ceramic materials; 8. Documentation; 9. New technical developments.

  18. Design of a Novel Flexible Capacitive Sensing Mattress for Monitoring Sleeping Respiratory

    Directory of Open Access Journals (Sweden)

    Wen-Ying Chang

    2014-11-01

    Full Text Available In this paper, an algorithm to extract respiration signals using a flexible projected capacitive sensing mattress (FPCSM designed for personal health assessment is proposed. Unlike the interfaces of conventional measurement systems for poly-somnography (PSG and other alternative contemporary systems, the proposed FPCSM uses projected capacitive sensing capability that is not worn or attached to the body. The FPCSM is composed of a multi-electrode sensor array that can not only observe gestures and motion behaviors, but also enables the FPCSM to function as a respiration monitor during sleep using the proposed approach. To improve long-term monitoring when body movement is possible, the FPCSM enables the selection of data from the sensing array, and the FPCSM methodology selects the electrodes with the optimal signals after the application of a channel reduction algorithm that counts the reversals in the capacitive sensing signals as a quality indicator. The simple algorithm is implemented in the time domain. The FPCSM system is used in experimental tests and is simultaneously compared with a commercial PSG system for verification. Multiple synchronous measurements are performed from different locations of body contact, and parallel data sets are collected. The experimental comparison yields a correlation coefficient of 0.88 between FPCSM and PSG, demonstrating the feasibility of the system design.

  19. Clinical Results of Arthroscopic Repair of Isolated Longitudinal Tear of Medial Meniscus by Vertical Cruciate Double Mattress Sutures with Outside-in Technique

    Directory of Open Access Journals (Sweden)

    Seyied Hamid Barzgar

    2013-09-01

    Full Text Available Introduction : Meniscal tears are one of the most common injuries treated by arthroscopic techniques. Arthroscopic meniscal repair is an accepted way of treatment for meniscal tears. Different arthroscopic techniques for meniscal repair are: inside-out, outside-in and all inside. In the first 2 techniques, meniscus is repaired by sutures and in the later by suture or by commercial ready implants . The goal of current study is assessing clinical results of arthroscopic repair of longitudinal meniscal tears with vertical cruciate double mattress sutures by outside-in technique after 9 months.   Methods: In this case series study, in 13 patients having criteria for engaging the study with longitudinal isolated meniscus tear, arthroscopic meniscal repair was done with vertical cruciate double mattress sutures by outside-in technique and patients were followed for 9 months.   Results: Of 13 patients, there were 12 males (92.3% and one female (7.7% aged 15-38 (average 28.3 years. In follow up period, there was one case (7.7% of irritation by subcutaneous knot. There was not any failure of repair. Average Lysholm score increased from 55.23 to 91.23 after 9 months of follow up, which was statistically significant (p<0.001. At the end of follow up period, there was not any medial joint line tenderness of knee, giving way or significant effusion or pain.   Conclusion: This study shows that this technique has a good short term outcome with no failure and low complications but it is necessary to do more long term studies to prove it.

  20. Strategic information for industrial policy-making in developing countries; Information strategique pour le policy-making industriel dans les pays en developpement

    Energy Technology Data Exchange (ETDEWEB)

    Gonod, P F

    1990-05-01

    The practice shows that many crucial decisions for industrialization in developing countries have been taken based on incomplete information. For strategic decisions an incomplete information may have catastrophic consequences. The function of policy-making is defined as the process by which the information generated/or used in a particular context is reevaluated in a different context in order to formulate/or execute a policy of alternative decisions. It follows that the industrial information must be presented in such a manner to allow a reevaluation and alternative decisions. 30 notes.

  1. Low Cost Plastic Optical Fiber Pressure Sensor Embedded in Mattress for Vital Signal Monitoring.

    Science.gov (United States)

    Sartiano, Demetrio; Sales, Salvador

    2017-12-13

    The aim of this paper is to report the design of a low-cost plastic optical fiber (POF) pressure sensor, embedded in a mattress. We report the design of a multipoint sensor, a cheap alternative to the most common fiber sensors. The sensor is implemented using Arduino board, standard LEDs for optical communication in POF (λ = 645 nm) and a silicon light sensor. The Super ESKA ® plastic fibers were used to implement the fiber intensity sensor, arranged in a 4 × 4 matrix. During the breathing cycles, the force transmitted from the lungs to the thorax is in the order of tens of Newtons, and the respiration rate is of one breath every 2-5 s (0.2-0.5 Hz). The sensor has a resolution of force applied on a single point of 2.2-4.5%/N on the normalized voltage output, and a bandwidth of 10 Hz, it is then suitable to monitor the respiration movements. Another issue to be addressed is the presence of hysteresis over load cycles. The sensor was loaded cyclically to estimate the drift of the system, and the hysteresis was found to be negligible.

  2. Low Cost Plastic Optical Fiber Pressure Sensor Embedded in Mattress for Vital Signal Monitoring

    Directory of Open Access Journals (Sweden)

    Demetrio Sartiano

    2017-12-01

    Full Text Available The aim of this paper is to report the design of a low-cost plastic optical fiber (POF pressure sensor, embedded in a mattress. We report the design of a multipoint sensor, a cheap alternative to the most common fiber sensors. The sensor is implemented using Arduino board, standard LEDs for optical communication in POF (λ = 645 nm and a silicon light sensor. The Super ESKA® plastic fibers were used to implement the fiber intensity sensor, arranged in a 4 × 4 matrix. During the breathing cycles, the force transmitted from the lungs to the thorax is in the order of tens of Newtons, and the respiration rate is of one breath every 2–5 s (0.2–0.5 Hz. The sensor has a resolution of force applied on a single point of 2.2–4.5%/N on the normalized voltage output, and a bandwidth of 10 Hz, it is then suitable to monitor the respiration movements. Another issue to be addressed is the presence of hysteresis over load cycles. The sensor was loaded cyclically to estimate the drift of the system, and the hysteresis was found to be negligible.

  3. 76 FR 59014 - Standard for the Flammability of Mattresses and Mattress Pads; Technical Amendment

    Science.gov (United States)

    2011-09-23

    ... of the Standard; rather, SRM usage ensures continuity of a reliably high PFLB with low variability in... demonstrates that the PFLB performance of commercial cigarettes is subject to significant variability that can... industry has sufficient test data to support the hypothesis that RIP cigarettes consistently self...

  4. Proposing a model for safety risk assessment in the construction industry using gray multi-criterion decision-making

    Directory of Open Access Journals (Sweden)

    S. M. Abootorabi

    2014-09-01

    Full Text Available Introduction: Statistical Report of the Social Security Organization indicate that among the various industries, the construction industry has the highest number of work-related accidents so that in addition to frequency, it has high intensity, as well. On the other hand, a large number of human resources are working in this whish shows they necessity for paying special attention to these workers. Therefore, risk assessment of the safety in the construction industry is an effective step in this regard. In this study, a method for ranking safety risks in conditions of low number of samples and uncertainty is presented, using gray multi-criterion decision-making. .Material and Method: In this study, we first identified the factors affecting the occurrence of hazards in the construction industry. Then, appropriate for ranking the risks were determined and the problem was defined as a multi-criterion decision-making. In order to weight the criteria and to evaluate alternatives based on each criterion, gray numbers were used. In the last stage, the problem was solved using the gray possibility degree. .Results: The results show that the method of gray multi-criterion decision-making is an effective method for ranking risks in situations of low samples compared with other methods of MCDM. .Conclusion: The proposed method is preferred to fuzzy methods and statistics in uncertain and low sample size, due to simple calculations and no need to define the membership function.

  5. Effects of Supply Chain Management on Firm’s Growth in Retail Industry: A Case Study of Tusker Mattresses Limited

    OpenAIRE

    Peter Lkitiyan Leparachao

    2014-01-01

    In today’s rapidly changing and highly competitive retail industry, every forward looking retailer will endeavour ensure his/her products to reach his store’s shelves ahead of the competition. This challenge is influenced by many factors both within and without the organization or the chain for example globalization, deregulation, new entrants and convergence of the industries. It is a fact today that retailing is a significant part of economic activities of both developed and developing coun...

  6. A hybrid multiple attribute decision making method for solving problems of industrial environment

    Directory of Open Access Journals (Sweden)

    Dinesh Singh

    2011-01-01

    Full Text Available The selection of appropriate alternative in the industrial environment is an important but, at the same time, a complex and difficult problem because of the availability of a wide range of alternatives and similarity among them. Therefore, there is a need for simple, systematic, and logical methods or mathematical tools to guide decision makers in considering a number of selection attributes and their interrelations. In this paper, a hybrid decision making method of graph theory and matrix approach (GTMA and analytical hierarchy process (AHP is proposed. Three examples are presented to illustrate the potential of the proposed GTMA-AHP method and the results are compared with the results obtained using other decision making methods.

  7. Tobacco Industry Political Activity and Tobacco Control Policy Making in Washington: 1996-2000

    OpenAIRE

    Nixon, Meredith L. BA; Glantz, Stanton A. Ph.D.

    2001-01-01

    • After making substantial progress on tobacco control in the mid-1990s, the tobacco industry has stifled tobacco control activities in Washington through a mixture of campaign contributions and legal challenges. • Political campaign contributions have remained steadily high throughout the 1990s. Philip Morris, RJ Reynolds, the Tobacco Institute, Lorillard, Brown & Williamson, and the Smokeless Tobacco Council contributed $362,298 to campaigns in 1996 through 2000 election cycles: $1...

  8. The Role of Hybrid Make-to-Stock (MTS) - Make-to-Order (MTO) and Economic Order Quantity (EOQ) Inventory Control Models in Food and Beverage Processing Industry

    Science.gov (United States)

    Najhan Mohd Nagib, Ahmad; Naufal Adnan, Ahmad; Ismail, Azianti; Halim, Nurul Hayati Abdul; Syuhadah Khusaini, Nurul

    2016-11-01

    The inventory model had been utilized since the early 1900s. The implementation of the inventory management model is generally to ensure that an organisation is able to fulfil customer's demand at the lowest possible cost to improve profitability. This paper focuses on reviewing previous published papers regarding inventory control model mainly in the food and beverage processing industry. The author discusses four inventory models, which are the make-to-stock (MTS), make-to-order (MTO), economic order quantity (EOQ), and hybrid of MTS-MTO models. The issues raised by the researchers on the above techniques as well as the elements need to be considered upon selection have been discussed in this paper. The main objective of the study is to highlight the important role played by these inventory control models in the food and beverage processing industry.

  9. Making the link: climate policy and the reform of the UK construction industry

    International Nuclear Information System (INIS)

    Sorrell, Steve

    2003-01-01

    This paper explores the barriers to energy efficiency in the construction of non-domestic buildings in the UK. The source of the barriers is argued to lie in the organisation of the construction industry, including the linear design process, the reliance on cost-based competitive tendering and the incentives placed upon different actors. The consequences include oversizing of equipment, reduced quality, neglect of whole life costs and lack of integrated design. Each of these problems can usefully be interpreted using concepts from the new institutional economics. While the barriers are well known to construction industry specialists, they are relatively neglected in the academic literature on energy policy. Furthermore, conventional policy measures such as building regulations leave these barriers largely untouched. The UK construction industry is currently undergoing a series of reforms which aim to change the relationship between different actors and to achieve improvements in product quality and productivity. While these reforms have the potential to address many of the barriers, the reform agenda makes practically no reference to sustainability. This paper argues that climate policy objectives must be integrated into the reform agenda if the UK is to begin the transition to a low carbon built environment

  10. Making and Doing Politics Through Grassroots Scientific Research on the Energy and Petrochemical Industries

    Directory of Open Access Journals (Sweden)

    Sara Wylie

    2017-09-01

    Full Text Available The high stakes of emergent environmental crises, from climate change to widespread toxic exposures, have motivated STS practitioners to innovate methodologically, including leveraging STS scholarship to actively remake environmental scientific practice and technologies. This thematic collection brings together current research that transforms how communities and academics identify, study, and collectively respond to contaminants engendered by the fossil fuel and petrochemical industries, including air contamination from hydraulic fracking, marine pollution from petroleum-derived plastics, and hydrocarbon derivatives such as formaldehyde that intoxicate our homes. These interventions make inroads into the “undone science” and “regimes of imperceptibility” of environmental health crises. Authors, most of whom are practitioners, investigate grassroots methods for collaboratively designing and developing low-cost monitoring tools, crowdsourcing data analysis, and imagining ways of redressing toxicity outside of the idioms of science. Collectively, these articles work towards remaking how knowledge is made about and across industrial systems by networking community grounded approaches for accounting for environmental health issues created by the fossil fuels and allied petrochemical industries.

  11. Ergonomic decision-making: a conceptual framework for experienced practitioners from backgrounds in industrial engineering and physical therapy.

    Science.gov (United States)

    Piegorsch, Karen M; Watkins, Ken W; Piegorsch, Walter W; Reininger, Belinda; Corwin, Sara J; Valois, Robert F

    2006-09-01

    Ergonomists play an important role in preventing and controlling work-related injuries and illnesses, yet little is known about the decision-making processes that lead to their recommendations. This study (1) generated a data-grounded conceptual framework, based on schema theory, for ergonomic decision-making by experienced practitioners in the USA and (2) assessed the adequacy of that framework for describing the decision-making of ergonomics practitioners from backgrounds in industrial engineering (IE) and physical therapy (PT). A combination of qualitative and quantitative analyses, within and across 54 decision-making situations derived from in-depth interviews with 21 practitioners, indicated that a single framework adequately describes the decision-making of experienced practitioners from these backgrounds. Results indicate that demands of the practitioner environment and practitioner factors such as personality more strongly influence the decision-making of experienced ergonomics practitioners than does practitioner background in IE or PT.

  12. Enhancing shareholder value: Making a more compelling energy efficiency case to industry by quantifying non-energy benefits

    International Nuclear Information System (INIS)

    Pye, Miriam; McKane, A.T.

    1999-01-01

    Making a case for investing in energy-efficient technologies based on energy savings alone has not always proven successful. Evidence suggests, however, that industrial decision makers will understand energy efficiency investments as part of a broader set of parameters that affect company productivity and profitability

  13. Full‐factorial design space exploration approach for multi‐criteria decision making of the design of industrial halls

    NARCIS (Netherlands)

    Lee, B. (Bruno); Pourmousavian, N. (Navid); Hensen, J.L.M.

    2016-01-01

    Industrial halls pose high energy saving potential that is not yet explored under current design practice. Common design approaches such as parametric study or optimization are largely constrained by the assumptions and do not promote flexibility in the decision making process. Based on the unique

  14. Evaluation of comfort in bedridden older adults using an air-cell mattress with an automated turning function: measurement of parasympathetic activity during night sleep.

    Science.gov (United States)

    Futamura, Megumi; Sugama, Junko; Okuwa, Mayumi; Sanada, Hiromi; Tabata, Keiko

    2008-12-01

    This study objectively evaluated the degree of comfort in bedridden older adults using an air-cell mattress with an automated turning mechanism. The sample included 10 bedridden women with verbal communication difficulties. The high frequency (HF) components of heart rate variability, which reflect parasympathetic nervous activity, were compared for the manual and automated turning periods. No significant differences in the HF component were observed in 5 of the participants. Significant increases in the HF component associated with automated turning were observed in 3 participants; however, the two participants with the lowest body mass index values exhibited a significant reduction in the HF component during the automated turning period. The results revealed that comfort might not be disturbed during the automated turning period.

  15. PENCEMARAN UDARA DI RUANG PROSES PEMBATIKAN INDUSTRI RUMAH TANGGA BATIK: STUDI KASUS INDUSTRI RUMAH TANGGA BATIK DI KAMPUNG TAMAN KOTAMADYA YOGYAKARTA (Indoor Air Polution in batik-Making Workrooms of Batik Home Industry:Case Study of Batik Home

    Directory of Open Access Journals (Sweden)

    Darmiyanti Darmiyanti

    2003-03-01

    Full Text Available ABSTRAK Penelitian ini bertujuan untuk menginvestigasi konsentrasi karbon monoksida, karbon dioksida, sulfur dioksida, suhu, kelembaban dan bau ruang kerja pembuatan batik sebagai akibat dari proses pembuatan batik dalam lingkungan kerja. Studi kasus dilakukan di industri rumahan (home indyustry di kampung Taman Yogyakarta. Penelitian ini dilakukan dari bulan desember 1999 sampai januari 2000. Pengukuran parameter dilakukan dalam 2 rumah industri batik yang masing-masing menggunakan satu dan tiga kompor sebagai pemanas. Metode analisis data adalah analisis times series dan analisis grafis. Konsentrasi karbon monoksida berkisar antara 2,00-8,66 ppm, karbondioksida berkisar antara 372,498-472,885 ppm. Sulfurdioksida berkisara antara 0,00028-0,00268 ppm. Temperatur berkisar antara 29 oC-34 oC, sedangkan kelembaban berkisar antara 50,5 %-67%. Penelitian mengindikasikan bahwa ruang kerja batik telah terkontaminasi karbon monoksida yang beresiko terhadap kesehatan para pekerja. Ruang kerja pembuatan batik tidak nyaman.   ABSTRACT This research aims to investigate the concentrations of carbon monoxide, carbon dioxide, sulfur dioxide, temperature, humidity and smells batik-making workrooms as a result of the batik-making process on work environments. A case-study of home industries was conducted in Kampung Taman Yogyakarta Municipal City. The research was conducted from December 1999 to January 2000. Measurement of parameters under investigation was carried out in two batik home industries, each of which used stove and there stove as heaters. Methods of analyzing the data were time series analysis, and graphics analysis. The concentration of carbon monoxide in batik-making workrooms ranges between 2.00 ppm and 8.66 ppm carbon dioxide ranged between 372.498 ppm and 473.885 ppm. Sulfur dioxide ranged vetweeb0.00028 ppm and 0.00268 ppm. Temperature ranged between 29oC and 34oC. Humidity ranged from 50.5% to 67%.The research indicated that batik masking

  16. 16 CFR 1632.2 - Purpose, scope, and applicability.

    Science.gov (United States)

    2010-01-01

    ... resistance of a mattress prototype or a mattress pad prototype. Use of the tests in §§ 1632.6 and 1632.7 is... prototype designs of mattresses and mattress pads before the sale in commerce or the introduction in... of a mattress prototype or a mattress pad prototype. (b) Scope. (1) All mattresses, as defined in...

  17. Antero-posterior (AP) pelvis x-ray imaging on a trolley: Impact of trolley design, mattress design and radiographer practice on image quality and radiation dose

    International Nuclear Information System (INIS)

    Tugwell, J.R.; England, A.; Hogg, P.

    2017-01-01

    Introduction: Physical and technical differences exist between imaging on an x-ray tabletop and imaging on a trolley. This study evaluates how trolley imaging impacts image quality and radiation dose for an antero-posterior (AP) pelvis projection whilst subsequently exploring means of optimising this imaging examination. Methods: An anthropomorphic pelvis phantom was imaged on a commercially available trolley under various conditions. Variables explored included two mattresses, two image receptor holder positions, three source to image distances (SIDs) and four mAs values. Image quality was evaluated using relative visual grading analysis with the reference image acquired on the x-ray tabletop. Contrast to noise ratio (CNR) was calculated. Effective dose was established using Monte Carlo simulation. Optimisation scores were derived as a figure of merit by dividing effective dose with visual image quality scores. Results: Visual image quality reduced significantly (p < 0.05) whilst effective dose increased significantly (p < 0.05) for images acquired on the trolley using identical acquisition parameters to the reference image. The trolley image with the highest optimisation score was acquired using 130 cm SID, 20 mAs, the standard mattress and platform not elevated. A difference of 12.8 mm was found between the image with the lowest and highest magnification factor (18%). Conclusion: The acquisition parameters used for AP pelvis on the x-ray tabletop are not transferable to trolley imaging and should be modified accordingly to compensate for the differences that exist. Exposure charts should be developed for trolley imaging to ensure optimal image quality at lowest possible dose. - Highlights: • Acquisition parameters used for AP pelvis imaging on a trolley need adapting from those used on the x-ray tabletop. • Radiation dose significantly increases for trolley imaging. • An increase in SID can reduce radiation dose and magnification for trolley imaging

  18. Workplace Learning in the New Zealand Apple Industry Network: A New Co-Design Method for Government "Practice Making"

    Science.gov (United States)

    Hill, Roberta; Capper, Phillip; Wilson, Ken; Whatman, Richard; Wong, Karen

    2007-01-01

    Purpose: The purpose of this paper is to describe how, from 2004-2006, a New Zealand research team experimented with the "change laboratory" learning process to create a new method of government policy development and implementation, referred to as "practice-making". The apple industry in Hawke's Bay was chosen because of the…

  19. Tacit Knowledge - The Key for Decision Making in Nuclear Industry

    International Nuclear Information System (INIS)

    Pleslic, S.; Novosel, N.

    2008-01-01

    knowledge cannot or will not be totally converted into explicit knowledge. Tacit knowledge management is a significant challenge in the business world. But not all tacit knowledge is valuable or even accurate. Although we may not be able to judge the knowledge itself, tacit knowledge is a big resource for all activities, especially for innovation. This article presents some outlines in order to understand potential, complexity and the role of tacit knowledge in decision making processes, especially in nuclear industry.(author)

  20. What makes industries believe in formal methods

    NARCIS (Netherlands)

    Vissers, C.A.; van Sinderen, Marten J.; Ferreira Pires, Luis; Pires, L.F.; Danthine, A.S.; Leduc, G.; Wolper, P.

    1993-01-01

    The introduction of formal methods in the design and development departments of an industrial company has far reaching and long lasting consequences. In fact it changes the whole environment of methods, tools and skills that determine the design culture of that company. A decision to replace current

  1. Risk-informed decision making in the nuclear industry: Application and effectiveness comparison of different genetic algorithm techniques

    International Nuclear Information System (INIS)

    Gjorgiev, Blaže; Kančev, Duško; Čepin, Marko

    2012-01-01

    Highlights: ► Multi-objective optimization of STI based on risk-informed decision making. ► Four different genetic algorithms (GAs) techniques are used as optimization tool. ► Advantages/disadvantages among the four different GAs applied are emphasized. - Abstract: The risk-informed decision making (RIDM) process, where insights gained from the probabilistic safety assessment are contemplated together with other engineering insights, is gaining an ever-increasing attention in the process industries. Increasing safety systems availability by applying RIDM is one of the prime goals for the authorities operating with nuclear power plants. Additionally, equipment ageing is gradually becoming a major concern in the process industries and especially in the nuclear industry, since more and more safety-related components are approaching or are already in their wear-out phase. A significant difficulty regarding the consideration of ageing effects on equipment (un)availability is the immense uncertainty the available equipment ageing data are associated to. This paper presents an approach for safety system unavailability reduction by optimizing the related test and maintenance schedule suggested by the technical specifications in the nuclear industry. Given the RIDM philosophy, two additional insights, i.e. ageing data uncertainty and test and maintenance costs, are considered along with unavailability insights gained from the probabilistic safety assessment for a selected standard safety system. In that sense, an approach for multi-objective optimization of the equipment surveillance test interval is proposed herein. Three different objective functions related to each one of the three different insights discussed above comprise the multi-objective nature of the optimization process. Genetic algorithm technique is utilized as an optimization tool. Four different types of genetic algorithms are utilized and consequently comparative analysis is conducted given the

  2. Making aerospace technology work for the automotive industry - Introduction

    Science.gov (United States)

    Olson, W. T.

    1978-01-01

    In many cases it has been found that advances made in one technical field can contribute to other fields. An investigation is in this connection conducted concerning subjects from contemporary NASA programs and projects which might have relevance and potential usefulness to the automotive industry. Examples regarding aerospace developments which have been utilized by the automotive industry are related to electronic design, computer systems, quality control experience, a NASA combustion scanner and television display, exhaust gas analyzers, and a device for suppressing noise propagated through ducts. Projects undertaken by NASA's center for propulsion and power research are examined with respect to their value for the automotive industry. As a result of some of these projects, a gas turbine engine and a Stirling engine might each become a possible alternative to the conventional spark ignition engine.

  3. The factors which affect the information system needs for decision making in the hotel industry (A comparison study between the U. K. and Egypt)

    OpenAIRE

    Hassan, Mahmoud Abdel Maksoud Mouhammed

    1986-01-01

    This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University. This report contains evidence to show that the information provided by computers in the hotel industry, for the management work & decision making, has not changed too much since 1970. In most industries, the successful computer applications are clearly noticed in the routine work (clerical jobs) more than the management work (strategic & tactical jobs). As for the hotel industry the u...

  4. Towards preventative eco-industrial development: an industrial and urban symbiosis case in one typical industrial city in China

    DEFF Research Database (Denmark)

    Dong, Liang; Fujita, Tsuyoshi; Dai, Ming

    2016-01-01

    situation. In order to investigate the eco-benefits of eco-industrial development in China, this study focused on an industrial and urban symbiosis case of Guiyang city in which process synergy, municipal solid wastes recycling and waste energy utilization were incorporated in this typical industrial city...... policy implications to address the barriers of promoting industrial and urban symbiosis were proposed. This study is critical for future industrial and urban planning policy making and shed a light on innovative eco-industrial development in China....

  5. Education-industry partnership: the chemical industry experience

    International Nuclear Information System (INIS)

    Bricknell, D.J.

    1994-01-01

    The European Chemical Industry and the Nuclear Power Industry share similar problems and hopefully can share similar solutions to them. A recent survey of public opinion conducted on behalf of the chemical industry has shown that the general public knows little about the industry and does not trust it to behave responsibly. The industry is responding in two ways: firstly to demonstrate that it is a responsible member of the community by operating to the highest safety and environmental standards and by being open in its dealings with the public on such matters. Secondly the industry is working with the education system to ensure that the public has the opportunity to gain a good education in science, is able to make rational judgments about risks and benefits and is better able to understand and accept the role of the chemical industry in society

  6. Working Together and Making a Difference: Virginia Western Community College and Goodwill Industries of the Valleys Partnership Case Study Report

    Science.gov (United States)

    Browning, Bill

    2015-01-01

    "Working Together and Making A Difference: Virginia Western Community College and Goodwill Industries of the Valleys Partnership Case Study Report" is a report aimed at informing community college and workforce leaders of best practices for launching and expanding partnerships to serve students more effectively. Co-published by AspenWSI…

  7. An intelligent system for helping petroleum industry risk management decision making

    Energy Technology Data Exchange (ETDEWEB)

    Barreto, Mara M.G.; Ebecken, Nelson F.F. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia

    1998-07-01

    The objective of this paper is to present an intelligent system for helping in decision making about risk analysis in petroleum industry management. Such a system supports explicit inconsistencies in its knowledge bases, and is able to solve it by means of a decision's procedure, in which Fuzzy Logic is used. Expert Systems which knowledge bases carry out explicitly inconsistencies are called paraconsistent systems and were initially proposed by Da Costa and Subrahmanian. The defuzzyfication process of a paraconsistent model was already suggested by Barreto, Ebecken and Clement, and established by Barreto and Ebecken. In Barreto, Ebecken and Clemente show an application of this model for helping in decision making in a business situation. The system that will be presented here is a simulation of many possible applications of this model, and helps the analyses of risk business petroleum project's investment, and, it is desirable, can point out some possibilities of getting out difficulties when the risk is increased. In the introduction, we define some risk result's indicators to be considered, such as, petroleum business project duration, staffing, priority; and we define the system's logical structure. In the Overriding Part, firstly, we show the implemented system's , simulation, how it works, how to get outputs from the given and how to analyze the final results, and explicit the methods used in situations where the inconsistencies appear giving comments about the critical situations. Finally, in the conclusion, we comment the coherence of results, and give comments about some others applications of this kind of systems. (author)

  8. Governance mode vs. governance fit? : Performance implications of make-or-ally choices for product innovation in the worldwide aircraft industry, 1942-2000

    OpenAIRE

    Castaner, X.; Mulotte, L.; Garrette, B.; Dussauge, P.

    2014-01-01

    We examine the impact of governance mode and governance fit on performance in make-or-ally decisions. We argue that while horizontal collaboration and autonomous governance have direct and countervailing performance implications, the alignment of make-or-ally choices with the focal firm's resource endowment and the activity's resource requirements leads to better performance. Data on the aircraft industry show that relative to aircraft developed autonomously, collaborative aircraft exhibit gr...

  9. Application of Specific Features of Industrial Products when Forming and Developing Brands of Industrial Enterprises

    Directory of Open Access Journals (Sweden)

    Yatsentiuk Stanislav V.

    2014-03-01

    Full Text Available The article analyses and structures approaches and principles of formulation of industrial products. It offers classification of goods and markets of industrial products by their characteristics and participants. It identifies main participants that make decisions at B2C and B2B markets and characterises their specific features and motivation when making decisions on purchase of products of industrial enterprises. It studies and analyses indicators of development of domestic markets of consumer goods and market of industrial products and dynamics of development of their relation in retrospective view.

  10. Effectiveness of house dust mite acaricide tri-n-butyl tin maleate on carpets, fabrics and mattress foam: a standardization of methodology Eficácia do acaricida maleato de estanho tri-n-butílico contra ácaros de poeira em carpetes, tecidos e espuma de colchão: padronização de metodologia

    Directory of Open Access Journals (Sweden)

    Satiko Uehara

    2006-06-01

    Full Text Available The aim of this study was to determine the effectiveness of the acaricide tri-n-butyl tin maleate, industrially applied to samples of carpets, mattress foam, and fabrics used for furniture upholstery, soft toys and shoe uppers. Approximately 100 adult house dust mites of the species Dermatophagoides pteronyssinus were inoculated into a Petri dish containing the sample (a piece of carpet, mattress foam, or fabric, treated with the acaricide, randomly collected. Mite-maintenance culture medium was added on top of each sample. After one, two, three, seven and 30 days of incubation at 25 ºC and 75% relative humidity, each dish was examined using a 40X stereoscopic microscope (40X. One hundred percent acaricide effectiveness was obtained in treated materials by the end of the 30th-day postinoculation period, under optimal conditions for mite maintenance.O objetivo do presente estudo foi verificar a eficácia do acaricida maleato de estanho tri-n-butílico, aplicado industrialmente em amostras de carpetes, tecidos de revestimentos de móveis e de calçados, assim como de espumas de colchão. Aproximadamente 100 ácaros adultos da espécie Dermatophagoides pteronyssinus foram inoculados em placa de Petri contendo a amostra (pedaço de colchão, tecido ou carpete, tratada com o produto acaricida, coletados aleatoriamente. Foi acrescentado sobre a amostra, meio de cultivo para a manutenção dos ácaros. Cada placa foi examinada após 1, 2, 3, 7 e 30 dias de incubação a 25 ºC e 75% de U.R.A. (umidade relativa do ar, sob microscópio estereoscópico com 40X de aumento. O acaricida maleato de estanho tri-n-butílico apresentou 100% de eficácia acaricida após 30 dias da aplicação, em condições ótimas para a manutenção dos ácaros.

  11. A Decision-Making Model for Evaluating and Selecting Suppliers for the Sustainable Operation and Development of Enterprises in the Aerospace Industry

    Directory of Open Access Journals (Sweden)

    Chin-Tsai Lin

    2018-03-01

    Full Text Available Due to rigorous quality requirements and high unit prices, the manufacture of machines used in the aerospace industry is characterized by a high entry threshold, high risk and a long payback period. A good decision-making model for evaluating and selecting suppliers is vital for sustainable enterprise development. Therefore, this study presents a new two-stage model for evaluating and selecting suppliers in the aerospace industry. In the first stage, a hierarchical structure is built with five main and 16 sub-criteria for supplier evaluation and selection following the modified Delphi method; in the second stage, the best alternative solution is selected following the analytic network process (ANP method. Finally, this study verifies the feasibility of the above model based on the purchase of high-precision and high-cost 3D measuring tools by Aerowin Technology Corporation, which is listed on the Taiwan Stock Exchange. The results show that the five criteria in the above model are ranked by their degree of importance, as follows: quality > cost > delivery > marketing > organizational planning. The findings of this research can be used as a reference for decision-making during the purchase of high-precision and high-priced machine tools in the aerospace industry.

  12. Economic statistics for the mining and metallurgical industries: 1990. Statistique economique des industries extractives et metallurgiques annee 1990

    Energy Technology Data Exchange (ETDEWEB)

    Rzonzef, L.

    1991-01-01

    Provides economic statistics for the Belgian mining and metallurgical industries in 1990. The review is divided into 4 parts: the extractive industries (including an analysis of the coal market and mines, quarries and associated industries); coke and briquette making; metallurgy (i.e. blast furnaces, steel making, rolling mills and manpower and materials consumption in the steel industry); and the extraction of sand from the Belgian continental shelf. 17 tabs.

  13. Do ethical Guidelines make a difference to decision-making?

    Science.gov (United States)

    Osborn, M; Day, R; Komesaroff, P; Mant, A

    2009-12-01

    The different levels of knowledge and understanding of attitudes to and use by physicians of the Royal Australasian College of Physicians (RACP) Guidelines for ethical relationships between physicians and the pharmaceutical industry are unknown. The aim of this study was to explore how physician Fellows of the RACP relate to and use the ethical Guidelines of the RACP regarding relationships with the pharmaceutical industry. Focus group discussions and in-depth face-to-face interviews were used to gather information from physicians who responded to invitations placed in electronic newsletters or through word of mouth. Five focus groups and eight in-depth interviews were conducted with 56 practising physicians in Australia and New Zealand. Most physicians were aware of the RACP ethical Guidelines (3rd edition, 2006), but only a few used them to resolve ethical dilemmas or to influence their decision-making in relation to interacting with the pharmaceutical industry. Ethical standards used or approaches to decision-making practices related to interactions with the pharmaceutical industry were most likely to have been developed through past experiences, peer pressure or decisions that were considered to be 'in the best interests of their patients'. There were strong opinions expressed about relationships with the pharmaceutical industry and how these relationships often lead to feelings of humiliation. Some felt they were prostituting themselves for the sake of acquiring funding for staff positions, medical devices, research or attendance at conferences. Very few physicians recollected having any assistance on how to deal with the pharmaceutical industry during their training, and those few who did recollect such input through their curricula and education felt they did not benefit. RACP Guidelines on ethical guidance for relating to the pharmaceutical industry have not been used by most physicians, and very few had read or referred to the Guidelines. Reliance on

  14. A new fuzzy MCDA framework for make-or-buy decisions: A case study of aerospace industry

    Directory of Open Access Journals (Sweden)

    Mohsen Cheshmberah

    2011-07-01

    Full Text Available One of the primary managerial decisions for manufacturing units is to find out which activity must be outsourced. A good outsourcing decision is normally involved with different criteria such as opportunity costs, cost saving, etc. In this paper, we present a multi criteria decision-making method to find a suitable solution for outsourcing activities called preference ranking organization method for enrichment evaluations (PROMETHEE. The proposed model of this paper uses fuzzy numbers to determine the relative importance of different criteria and it is implemented for a real-world case study of aerospace industry.

  15. Environmental resposibility in the sport industry: Why it makes sense

    Directory of Open Access Journals (Sweden)

    MARILOU IOAKIMIDIS

    2006-01-01

    Full Text Available Environmental responsibility (ER, as a major aspect of corporate social responsibility, is an important issue for organizations in the sport industry as it is for all other organizations. This paper presents three reasons why sport industry firms should embrace environmental responsibility as a management competency. The first is the ethical reason, which consists of two main considerations and applies not just to firms in the sport industry but to all organizations. The second reason pertains specifically to sport organizations and invokes their unique relationship to their customers. The third reason is that embracing ER can lead to economic benefits for the organization. Two main aspects of this advantage –cost savings due to more efficient resource usage and enhanced image– are discussed.

  16. How can health care organisations make and justify decisions about risk reduction? Lessons from a cross-industry review and a health care stakeholder consensus development process

    International Nuclear Information System (INIS)

    Sujan, Mark A.; Habli, Ibrahim; Kelly, Tim P.; Gühnemann, Astrid; Pozzi, Simone; Johnson, Christopher W.

    2017-01-01

    Interventions to reduce risk often have an associated cost. In UK industries decisions about risk reduction are made and justified within a shared regulatory framework that requires that risk be reduced as low as reasonably practicable. In health care no such regulatory framework exists, and the practice of making decisions about risk reduction is varied and lacks transparency. Can health care organisations learn from relevant industry experiences about making and justifying risk reduction decisions? This paper presents lessons from a qualitative study undertaken with 21 participants from five industries about how such decisions are made and justified in UK industry. Recommendations were developed based on a consensus development exercise undertaken with 20 health care stakeholders. The paper argues that there is a need in health care to develop a regulatory framework and an agreed process for managing explicitly the trade-off between risk reduction and cost. The framework should include guidance about a health care specific notion of acceptable levels of risk, guidance about standardised risk reduction interventions, it should include regulatory incentives for health care organisations to reduce risk, and it should encourage the adoption of an approach for documenting explicitly an organisation's risk position. - Highlights: • Empirical description of industry perceptions on making risk reduction decisions. • Health care consensus development identified five recommendations. • Risk concept should be better integrated into safety management. • Education and awareness about risk concept are required. • Health systems need to start a dialogue about acceptable levels of risk.

  17. A multi-criteria decision making approach for supplier selection in the flexible packaging industry

    Directory of Open Access Journals (Sweden)

    Cristea Ciprian

    2017-01-01

    Full Text Available The supplier selection problem represents one of the most important components of the supply chain management. This article presents a multiple criteria decision making analysis contributing to the selection of the most convenient supplier in the flexible packaging industry. Due to the fact that in today's supply chain management, the performance of potential suppliers is evaluated against multiple criteria rather than taking into account only the cost factor, the appropriate criteria in the supplier selection have been identified, and the considered variants are assessed, considering the decision maker’s preferences and existing constraints. The variants are ranked in terms of their suitability for selecting a supplier with the use of Electre III method. The results obtained from the simulation experiment suggest that this methodology is a feasible decision support model.

  18. 16 CFR 1632.1 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... resilient material used alone or in combination with other products intended or promoted for sleeping upon... Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FLAMMABLE FABRICS ACT REGULATIONS STANDARD FOR THE... mattresses, day bed mattresses, roll-a-way bed mattresses, high risers, and trundle bed mattresses. See...

  19. Application of game theory in decision making strategy: Does gas fuel industry need to kill oil based fuel industry?

    Science.gov (United States)

    Azmi, Abdul Luky Shofi'ul; Prabandari, Dyah Lusiana; Hakim, Muhammad Lintang Islami

    2017-03-01

    Even though conversion of oil based fuel (Bahan Bakar Minyak) into gas fuel (Bahan Bakar Gas) for transportation (both land and sea) is one of the priority programs of the government of Indonesia, rules that have been established merely basic rules of gas fuel usage license for transportation, without discussing position of gas fuel related to oil based fuel in detail. This paper focus on possible strategic behavior of the key players in the oil-gas fuel conversion game, who will be impacted by the position of gas fuel as complement or substitution of oil based fuel. These players include industry of oil based fuel, industry of gas fuel, and the government. Modeling is made based on two different conditions: government plays a passive role and government plays an active role in legislating additional rules that may benefit industry of gas fuel. Results obtained under a passive government is that industry of oil based fuel need to accommodate the presence of industry of gas fuel, and industry of gas fuel does not kill/ eliminate the oil based fuel, or gas fuel serves as a complement. While in an active government, the industry of oil based fuel need to increase its negotiation spending in the first phase so that the additional rule that benefitting industry of gas fuel would not be legislated, while industry of gas fuel chooses to indifferent; however, in the last stage, gas fuel turned to be competitive or choose its role to be substitution.

  20. Atoms in industry can make a difference: The IAEA Scientific Forum

    International Nuclear Information System (INIS)

    Viegas, Luciana

    2015-01-01

    Industry has become indispensable to modern life. As the world travels further and faster, cities sprawl into large conglomerates, trade crosses barriers, and friendships are held together by the invisible strings of the Internet, it is hard to imagine a world untouched by large-scale industrial products and processing. This year's Scientific Forum will focus on the uses of radiation technologies in industry, and how they are applied to control the quality of the products we use in our daily lives, such as car tyres and cables, enhance the durability of a variety of materials, and even sanitize wastewater. Leading experts, academics and industrial representatives will meet in Vienna, Austria, from 15 to 16 September 2015 on the margins of the IAEA General Conference to review the multitude of benefits these techniques offer, particularly in the context of sustainable development.

  1. Atoms in industry can make a difference: The IAEA Scientific Forum

    International Nuclear Information System (INIS)

    Viegas, Luciana

    2015-01-01

    Industry has become indispensable to modern life. As the world travels further and faster, cities sprawl into large conglomerates, trade crosses barriers, and friendships are held together by the invisible strings of the Internet, it is hard to imagine a world untouched by large-scale industrial products and processing. This year’s Scientific Forum will focus on the uses of radiation technologies in industry, and how they are applied to control the quality of the products we use in our daily lives, such as car tyres and cables, enhance the durability of a variety of materials, and even sanitize wastewater. Leading experts, academics and industrial representatives will meet in Vienna, Austria, from 15 to 16 September 2015 on the margins of the IAEA General Conference to review the multitude of benefits these techniques offer, particularly in the context of sustainable development.

  2. EVALUASI BEBAN FISIOLOGIS PADA INDUSTRI MANUFAKTUR (INDUSTRI PEMBUATAN KOMPONEN PESAWAT TERBANG DAN INDUSTRI SEPATU

    Directory of Open Access Journals (Sweden)

    Donny Richardo Sitohang

    2012-02-01

    Full Text Available Studi ini meneliti beban fisiologis yang dialami pekerja pada industri manufaktur, tepatnya pada industri pembuatan komponen pesawat terbang dan industri pembuatan sepatu. Pada industri pembuatan komponen pesawat terbang pekerjaan yang akan diteliti beban fisiologisnya adalah pekerjaan assembly, machining,dan metal forming. Untuk industri sepatu pekerjaan yang akan diamati adalah pekerjaan pola, jahit dan potong. Penelitian ini melibatkan 10 orang responden pada setiap jenis pekerjaan. Pada industri pembuatan komponen pesawat terbang nilai rata-rata denyut jantung kerja untuk pekerjaan assembly adalah sebesar 82.9±7,1 denyut/menit, untuk pekerjaan machining sebesar 79.9±9,5 denyut/menit, dan untuk pekerjaan metal forming sebesar 88,8 ±11,2  denyut/menit. Nilai rata-rata konsumsi oksigen relatif pada pekerjaan assembly adalah sebesar 20,8±4%, pekerjaan machining 23,1±5%, dan pekerjaan metal forming 26,4 ± 8%. Sedangkan pada industri pembuatan sepatu nilai denyut jantung kerja rata-rata untuk pekerjaan pola adalah 82±5,3 denyut/menit, pekerjaan jahit 84,5±6,1 denyut/menit, dan pekerjaan potong 88,4±11,5 denyut/menit. Nilai rata-rata konsumsi oksigen relatif pada pekerjaan pola adalah sebesar 15,8±5%, pekerjaan jahit 15,9±4%, dan pekerjaan potong 18±7%. Secara umum intensitas beban kerja fisik pada aktivitas yang diteliti baik pada industri pembuatan komponen pesawat terbang maupun industri pembuatan sepatu bersifat ringan dan masih berada dalam batas yang direkomendasikan. Kata kunci : Beban kerja fisiologis, Konsumsi Oksigen, Denyut Jantung, Skala Borg       Generally, the purpose of this study is to evaluate work physical capacity of Indonesian Aerospace production division operators and shoe industry operators. In this study, physiological workloads were evaluated in assembly, machining, and metal forming tasks (Indonesian Aerospace pattern making activity, sewing, and cutting (shoe industry using three indicators (heart rate

  3. Implications of nuclear industry globalization for chinese nuclear industry: opportunities and challenges

    International Nuclear Information System (INIS)

    Guo Zhifeng; Ding Qihua; Wang Zheng

    2014-01-01

    In recent years, globalization of the world nuclear industry has developed into a new phase. Chinese nuclear industry will be inevitably integrated into this trend. Globalization will bring both positive and adverse effects on Chinese nuclear industry. Facing the fierce competition, Chinese companies must rise to many challenges to enter the global nuclear market. And China need to make scientific decisions and take effective measures in various fields of nuclear industry to realized the goal of global development. (authors)

  4. Why the Distilled Spirits Industry Council of Australia is not a credible partner for the Australian government in making alcohol policy.

    Science.gov (United States)

    Munro, Geoffrey

    2012-06-01

    In 2008 the Australian government increased the excise rate on ready-to-drink premixed spirits or 'alcopops' by 70% to reduce their attraction to young people. A campaign against the decision was led by the Distilled Spirits Industry Council of Australia, whose members include representatives of the world's largest spirits producers and which aspires to partner the government in making alcohol policy. Distilled Spirits Industry Council of Australia's central thesis appeared to lack substance and sincerity: first, it promoted industry data that were evidently premature and misleading; second, it claimed ready-to-drinks were a safer alternative to the consumption of full-strength spirits because spirits pose a threat to drinkers due to their higher alcoholic content. For spirits producers to concede that drinking spirits is generically hazardous may be unprecedented and contradicts the spirits industry's long-standing opposition to the introduction of health warnings on product labels. Although that admission did not survive the resolution of the case, the effect may be profound, as it might justify the demand for greater control of the labelling and marketing of spirits, and reduce the credibility of spirits producers, and the broader alcohol industry, on matters of policy. © 2011 Australasian Professional Society on Alcohol and other Drugs.

  5. An Analysis of Design Decision-Making in Industrial Practice

    DEFF Research Database (Denmark)

    Ahmed, Saeema; Hansen, Claus Thorp

    2002-01-01

    This paper describes research that confronts a generic decision-making model with design strategies employed by experienced designers. The relationship between the decision-making activities proposed by the model and the eight design strategies identified by an empirical study of design work is e...

  6. INTEGRATED ON-BOARD COMPUTING SYSTEMS: PRESENT SITUATION REVIEW AND DEVELOPMENT PROSPECTS ANALYSIS IN THE AVIATION INSTRUMENT-MAKING INDUSTRY

    Directory of Open Access Journals (Sweden)

    P. P. Paramonov

    2013-03-01

    Full Text Available The article deals with present situation review and analysis of development prospects for integrated on-board computing systems, used in the aviation instrument-making industry. The main attention is paid to the projects carried out in the framework of an integrated modular avionics. Hierarchical levels of module design, crates (onboard systems and aviation complexes are considered in detail. Examples of the existing products of our country and from abroad and their brief technical characteristics are given and voluminous bibliography on the subject matter as well.

  7. Tobacco Industry Political Activity and Tobacco Control Policy Making in Pennsylvania: 1979-1996

    OpenAIRE

    Monardi, Fred M. Ph.D.; Glantz, Stanton A. Ph.D.

    1997-01-01

    The tobacco industry is a major political and legal force in Pennsylvania through campaign contributions, lobbying and litigation. The tobacco industry has become a major source of campaign contributions to legislative candidates, state constitutional office candidates, and political party committees. In the 1979-1980 election cycle, the tobacco industry contributed $3,600 to candidates and parties. In 1995-1996, the tobacco industry contributed $65,850 to candidates and parties. ...

  8. Better backs by better beds?

    DEFF Research Database (Denmark)

    Bergholdt, Kim; Fabricius, Rasmus N; Bendix, Tom

    2008-01-01

    mattresses have a positive effect on LBP, and especially a hard mattress is commonly believed to have a positive effect. METHODS: One hundred sixty CLBP patients were randomized to 1 of 3 groups, having a mattress/bed mounted in their sleeping room for 1 month. The beds were: (1) waterbed (Akva), (2) body......-conforming foam mattress (Tempur), and (3) a hard mattress (Innovation Futon). At baseline and after 4 weeks, a blinded observer interviewed the patients on LBP levels (0-10), daily function (activities of daily living, 0-30), and on the amount of sleeping hours/night. RESULTS: Because of dropout of 19 patients...... using the probably most relevant "worst case" data. There were no relevant difference between the effects of the water bed and the foam bed. CONCLUSION: The Waterbed and foam mattress' did influence back symptoms, function and sleep more positively as apposed to the hard mattress, but the differences...

  9. The Making and Development of Economic Forms of the Industry of Turkestan Krai in the late 19th – Early 20th Centuries

    Directory of Open Access Journals (Sweden)

    Tulebaev Turganzhan

    2015-06-01

    Full Text Available The period of the late 20th and the early 21st centuries is characterized for many post-socialist countries by profound social/economic transformations. They are going through a tough transition from the implementation of market reform to the formation of a market economy oriented towards innovation development. The historical past of these countries attests that, in a sense, they have already been going through a similar process – back in the late 19th-early 20th centuries. The history of the industry of Turkestan Krai during that period is a vivid example of the process of the making and development of capitalist relations. This proves once again the relevance and timeliness of the study of the characteristics of the evolution of the region’s industry and determination of its prevalent forms. The author examines the initial forms of the region’s industry. Only the penetration of commodity production on the capitalist basis and the resettlement of peasants, the settling down of Kazakhs on the land, the development of old and emergence of new towns and villages, and the construction of railroads would lay the foundation for social division of labor. This spurred the development of old and emergence of new sectors in the industry of Turkestan Krai. During the period under examination, the prevalent form of industry was petty commodity capitalist production. But the transition from craft production and its workshop form to capitalist petty commodity production in Turkestan Krai was a long and not always straightforward process. The author investigates the issue of the making of the factory/plant form of industry. The emergence of particular factories and plants was a consequence of the wide development of Russian capitalism, a result of adopting Central Russia’s accumulated experience in the way of applying production techniques and technology in Turkestan Krai. Based on the author’s study of facts relating to industrial production in

  10. Industrial Assessment Center Program Impact Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Martin, M.A.

    2000-01-26

    This report presents the results of an evaluation of the U.S. Department of Energy's Industrial Assessment Center (IAC) Program. The purpose of this program is to conduct energy, waste, and productivity assessments for small to medium-sized industrial firms. Assessments are conducted by 30 university-based industrial assessment centers. The purpose of this project was to evaluate energy and cost savings attributable to the assessments, the trained alumni, and the Websites sponsored by this program. How IAC assessments, alumni, and Web-based information may influence industrial energy efficiency decision making was also studied. It is concluded that appreciable energy and cost savings may be attributed to the IAC Program and that the IAC Program has resulted in more active and improved energy-efficiency decision making by industrial firms.

  11. Performance evaluation of the conventional Brazilian industries radiation protection in the small industrial gauges and industrial radiography areas

    International Nuclear Information System (INIS)

    Santos, Joyra Amaral dos

    1999-08-01

    This works evaluates by punctuation the performance in conventional Brazilian industries radiation protection area which make use of small industrial gauges and industrial radiography. It proposes, procedures for industry self-evaluation, besides a new radiation protection plans pattern for the small industrial gauges area. The data source where inspection reports of Dosimetry Radiation Protection Institute/Nuclear Energy Commission conventional Brazilian industries' radiation protection plans, beyond visitation to the inspection place. The performance evaluation has been realized both in the administrative and operational aspects of the industries. About of 60% of the industries have a satisfactory register control which does not happen to the operational control. The performance evaluation advantage is that industries may self-evaluate, foreseeing Dosimetry Radiation Protection Institute's regulation inspections, correcting its irregularities, automatically improving its services. The number of industries which have obtained satisfactory performance in both areas is below 70%, both in administrative and operational aspects. Such number can be considered a low one as it is radiation protection. The procedures propose in this work aim to improve such a situation. (author)

  12. How industries change.

    Science.gov (United States)

    McGahan, Anita M

    2004-10-01

    It's fairly obvious: To make intelligent investments within your organization, you need to understand how your whole industry is changing. But such knowledge is not always easy to come by. Companies misread clues and arrive at false conclusions all the time. To truly understand where your industry is headed, you have to take a long-term, high-level look at the context in which you do business, says Boston University professor Anita McGahan. She studied a variety of businesses from a cross section of industries over a ten-year period, examining how industry structure affects business profitability and investor returns. Her research suggests that industries evolve along one of four distinct trajectories--radical, progressive, creative, and intermediating--that set boundaries on what will generate profits in a business. These four trajectories are defined by two types of threats. The first is when new, outside alternatives threaten to weaken or make obsolete core activities that have historically generated profits for an industry. The second is when an industry's core assets--its resources, knowledge, and brand capital--fail to generate value as they once did. Industries undergo radical change when core assets and core activities are both threatened with obsolescence; they experience progressive change when neither are jeopardized. Creative change occurs when core assets are under threat but core activities are stable, and intermediating change happens when core activities are threatened while core assets retain their capacity to create value. If your company's innovation strategy is not aligned with your industry's change trajectory, your plan for achieving returns on invested capital cannot succeed, McGahan says. But if you understand which path you're on, you can determine which strategies will succeed and which will backfire.

  13. Instructional Materials: The Changing Industry

    Science.gov (United States)

    Brodinsky, Ben

    1975-01-01

    The beleaguered educational publishing industry is making a valiant stand against a storm of challenges. From eradicating bias in textbooks to verifying textbook effectiveness, many problems must be faced. The industry responds by cooperating with educators. (Editor)

  14. Decision making in the manufacturing environment using graph theory and fuzzy multiple attribute decision making methods

    CERN Document Server

    Rao, Ravipudi Venkata

    2007-01-01

    Manufacturing is the backbone of any industrialized nation. Recent worldwide advances in manufacturing technologies have brought about a metamorphism in the industry. Fast-changing technologies on the product front have created a need for an equally fast response from manufacturing industries. To meet these challenges, manufacturing industries have to select appropriate manufacturing strategies, product designs, manufacturing processes, work piece and tool materials, and machinery and equipment. The selection decisions are complex as decision making is more challenging today. Decision makers i

  15. Image of mining impacts future of US industry

    International Nuclear Information System (INIS)

    Beebe, R.R.

    1993-01-01

    The US mining industry has taken its licks over the years but remains economically viable and able to meet global demands, says R.R. Beebe, a retired executive with Homestake Mining Company in San Francisco. Despite a new-found environmental sensitivity, one of the industry's major problems is its negative public image, Beebe admits. open-quotes Mining's record of environmental insensitivity and demands for low-cost access to public lands has burdened an industry now largely committed to doing business fairly, responsibly, and with minimum environmental disturbance,close quotes he asserts. Another part of its image problem deals with the place of mining in the economic scheme of things. Too many people view mining as a open-quotes sunset industry,close quotes he says, making it difficult for the industry to get a fair hearing on the public stage. open-quotes Even the industry's top executives seem to prefer a low profile, rarely serving in government posts...and almost never seeking public platforms from which to expound their views,close quotes Beebe complains. The size of the US mining industry and the importance of the minerals it supplies to domestic industry make it a significant contributor to the nation's standard of living, Beebe emphasizes. This makes it an industry worth saving

  16. NEDO Forum 2001. Session on industrial technology development (Future of thing making and manufacturing/processing technologies); NEDO Forum 2001. Sangyo gijutsu kaihatsu session (monozukuri seisan kako gijutsu no mirai)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-09-20

    The presentations made at the above-named session of the NEDO (New Energy and Industrial Technology Development Organization) forum held in Tokyo on September 20, 2001, are collected in this report. In a lecture entitled 'History of thing making,' the roles played by the now-defunct National Testing Laboratory and Industrial Test and Research Center were described and strategy for future development was predicted. In a lecture entitled 'Thing making and international apprentices competition,' apprenticeship training in practice at Denso Systems Corporation was presented. In a lecture entitled 'Key technology in thing making: outlook of metal mold industry,' shift in Japanese manufacturers' paradigm and change in metal mold marketing were explained, and the importance of reaching for the first position in the world in some specific fields or of expanding the scope of work in the entire value chain was stressed. In a lecture entitled 'Digital meister project: Aiming at amalgamation of IT (information technology) and MT (manufacturing technology),' database construction in the manufacture of metal molds, introduction of knowledge management systems, and development of CAD/CAM/CAE (computer-aided design/computer-aided manufacturing/computer-aided engineering) were discussed. (NEDO)

  17. Enhancing shareholder value: Making a more compelling energy efficiency case to industry by quantifying non-energy benefits

    International Nuclear Information System (INIS)

    Pye, M.; McKane, A.

    1999-01-01

    This paper describes a more compelling case for industry to promote the non-energy benefits of energy efficiency investments. They do this in two ways to actively appeal to chief executive officers' (CEOs') and chief financial officers' (CFOs') primary responsibility: to enhance shareholder value. First, they describe the use of a project-by-project corporate financial analysis approach to quantify a broader range of productivity benefits that stem from investments in energy-efficient technologies, including waste reduction and pollution prevention. Second, and perhaps just as important, they present such information in corporate financial terms. These standard, widely accepted analysis procedures are more credible to industry than the economic modeling done in the past because they are structured in the same way corporate financial analysts perform discounted cashflow investment analyses on individual projects. Case studies including such financial analyses, which quantify both energy and non-energy benefits from investments in energy-efficient technologies, are presented. Experience shows that energy efficiency projects' non-energy benefits often exceed the value of energy savings, so energy savings should be viewed more correctly as part of the total benefits, rather than the focus of the results. Quantifying the total benefits of energy efficiency projects helps companies understand the financial opportunities of investments in energy-efficient technologies. Making a case for investing in energy-efficient technologies based on energy savings alone has not always proven successful. Evidence suggests, however, that industrial decision makers will understand energy efficiency investments as part of a broader set of parameters that affect company productivity and profitability

  18. Make-or-Buy Decisions in Industry Equilibrium with Heterogeneous Firms

    DEFF Research Database (Denmark)

    Laugesen, Anders

    2015-01-01

    , and the quality of a match determines the productivity of an outsourcing relationship. Incomplete contracts imply that outsourcing relationships suffer from holdup problems and suboptimally low levels of supplier investments. These search and contractual frictions under outsourcing are balanced against higher......This paper puts forward an industry-equilibrium model with heterogeneous firms in order to analyse possible interdependencies in firms' decisions to outsource the production of intermediates to unaffiliated business partners. Outsourcing requires that firms match in the market for intermediates...... production costs under vertical integration. It is found that interactions among firms in both the final- and intermediate-goods markets affect the decision to outsource. The results also show how the prevalence of outsourcing is affected by many different changes in the industry environment...

  19. The U.S. Chemical Industry, the Products It Makes

    Science.gov (United States)

    Chemical and Engineering News, 1972

    1972-01-01

    This section of the annual report on the chemical industry presents data on these areas of chemical production: growth rates, man-made fibers; the 50 largest volume chemicals, major inorganics and organics, plastics, drugs, magnesium, and paint. Includes production figures for 1961, 1969, 1970, 1971 and percent change for 1970-71 and for 1961-71.…

  20. The Industrial Internet of Things

    OpenAIRE

    Albano, Michele; Silva, José Bruno; Lino Ferreira, Luis

    2017-01-01

    Demo in 22º Seminário da Rede Temática de Comunicações Móveis (RTCM 2017). 18, Jan, 2017, Session III. Lisboa. The application of the Internet of Things to manufacturing is the driving force of the new industrial revolution (Industrie 4.0). In fact, most activities in the manufacturing industry can benefit from the data collected in the context of the industrial process. The Industrial Internet of Things (IIoT), whose pillars are the usage of IP communication between the devices and making...

  1. Making sense of modernity's maladies: health and disease in the Industrial Revolution.

    Science.gov (United States)

    Brown, Michael

    2006-09-01

    The industrialization and urbanization of Britain during the 19th century gave the medical profession something to think about. In particular, were the radical changes taking place in society responsible for the sudden rise in endemic and epidemic disease? This article (part of the Science in the Industrial Revolution series) examines the reactions of two key figures in the history of British public health, James Philips Kay and Thomas Southwood Smith, to this question. Their outlooks typify the tendency of Victorian medical practitioners to construct economies of health that saw disease as a consequence of the violation of natural laws and cycles rather than as a product of industrial modernity.

  2. Decision making under uncertainty

    International Nuclear Information System (INIS)

    Cyert, R.M.

    1989-01-01

    This paper reports on ways of improving the reliability of products and systems in this country if we are to survive as a first-rate industrial power. The use of statistical techniques have, since the 1920s, been viewed as one of the methods for testing quality and estimating the level of quality in a universe of output. Statistical quality control is not relevant, generally, to improving systems in an industry like yours, but certainly the use of probability concepts is of significance. In addition, when it is recognized that part of the problem involves making decisions under uncertainty, it becomes clear that techniques such as sequential decision making and Bayesian analysis become major methodological approaches that must be utilized

  3. Are new industry policies precautionary?

    DEFF Research Database (Denmark)

    Galland, Daniel; McDaniels, Timothy L

    2008-01-01

    . The paper finally argues that, although in practice, policy makers generally tend to make incremental choices that are reactive to diverse issues, new industries could adopt more precautionary policies based on processes of public negotiation, analytical decision making and regional planning based......This paper argues that regulatory processes and outcomes in the context of a new industry could respond to mechanisms and factors that shape governmental agendas, illustrating how policy can behave reactively rather than in a precautionary manner. In the case of salmon aquaculture, an emerging...... industry characterized by risks, uncertainties, exponential growth, economic significance and environmental controversy, the outcomes of such reactive policies are generally reflected in siting criteria that yield implicit environmental and socio-economic disadvantages and trade-offs. This paper proposes...

  4. Business management practices in the power industry: Decision making in a market economy

    Energy Technology Data Exchange (ETDEWEB)

    Brown, J.H. [Fieldstone Private Capital Group, New York, NY (United States); Rosel, V. [Fieldstone Private Capital Group, Prague (Czechoslovakia)

    1995-12-01

    Management of a free market power industry, or managing the transition from a planned economy to a free market one, is driven by a fundamental economic premise - it is unrealistic (and economically unsound) to try to shelter end users (manufacturers or otherwise) from the true cost of energy: (i) energy prices are a function of fuel inputs (ii) fuel inputs are world priced (iii) end users must pay prices based on true costs Trying to counter any of these dictates will cause economic inefficiencies and misallocations. Managers of energy production in a free market economy must therefore learn to acquire data, and learn to extrapolate. As information is never complete, or perfect, managers must learn to consider contingencies, alternatives and options. In a free market economy, the decision to build a power facility is not controlled simply by the recognition of a perceived need for more power in an area. Because survival in a free market economy requires making a profit, as part for the decision process managers must: (i) talk to their customers to determine power needs into the future (ii) talk to their input suppliers, and arrange contracts (iii) make sure that there is a spread between cost and revenue As stated this is a simple recipe, but is difficult in practice. To perform any forecasting, managers must acquire control over cost, so as to have a base from which to judge the continued profitability or potential profitability, of any current activity or future ventures. It should be noted that planning for the future is difficult at any time but even more so when moving through an era where in the entire economy is undergoing systemic changes. Historic customer base, and historic supply arrangements, may not mean much. Therefore, managers must keep acquiring information, and updating forecasts.

  5. Factors affecting stall use for different freestall bases.

    Science.gov (United States)

    Wagner-Storch, A M; Palmer, R W; Kammel, D W

    2003-06-01

    The objective of this study was to compare stall use (stall occupancy and cow position) by barn side for factors affecting stall use. A closed circuit television system recorded stall use four times per day for a 9-mo period starting May 9, 2001. Six factors were analyzed: stall base, distance to water, stall location within stall base section, stall location within barn, inside barn temperature, and length of time cows were exposed to stall bases. Two barn sides with different stocking densities were analyzed: low (66%), with cows milked by robotic milker; and high (100%), with cows milked 2X in parlor. Six stall base types were tested: two mattresses, a waterbed, a rubber mat, concrete, and sand (high side only). The base types were grouped 3 to 7 stalls/section and randomly placed in each row. Cows spent more time in mattress-based stalls, but the highest percentage lying was in sand-based stalls. The following significant stall occupancy percentages were found: sand had the highest percentage of cows lying on the high stocking density side (69%), followed by mattress type 1 (65%) > mattress type 2 (57%) > waterbed (45%) > rubber mat (33%) > concrete (23%). Mattress type 1 had the highest percentage stalls occupied (88%), followed by mattress type 2 (84%) > sand (79%) > soft rubber mat (65%) > waterbed (62%) > concrete (39%). On the low stocking rate side, mattress type 1 had the highest percentage cows lying (45%) and occupied (59.6%), followed by mattress type 2 > waterbed > soft rubber mat > concrete. Cow lying and stalls occupied percentages were highest for stalls 1) not at the end of a section, and 2) on the outside row, and varied by base type for time cows exposed to stalls and inside barn temperature. Lying and occupied percentages were different for different mattress types. The percentage of stalls with cows standing was higher for mat and mattress-based stalls. Results show mattress type 1 and sand to be superior and rubber mats and concrete inferior

  6. PENILAIAN TEKNOLOGI UNTUK MENENTUKAN POSISI INDUSTRI PESAING

    Directory of Open Access Journals (Sweden)

    Wahyu Susihono

    2013-02-01

    Corporation is one of handicraft companies supplied by five small industry of its trainee. Since the company will be privet in a short time, the head office manager wanted one of small industries take over its management. Therefore the company needs to determine one of small industry which is the best. The management intends to make an assessment of technology to five small industries of its trainee internally and externally as the basic of decision making. This research will be held by making an assessment to all of handicraft suppliers by using technometric model approach. In this approach assessment conducted by determining degree of technology component sophistication, valuing state-of-the-art, determining contribution of technology component, making the map of relation between the components, and valuing intensity of contribution components. The questioners spreading to five small industries analyzed by pairwise comparison Analytic Hierarchy Process (AHP then concluded by the calculation of TCC (Technology Contribution Coefficient. The company made internal assessment by using DEA (data envelopment analysis model then compare the result of TCC white DEA quantitatively. TCC result showed that the values of the industry in a row are Maharani by 52.23%, Bestari by 52.23%, Priyo by 41.51%, Rizky 32.66%, and Teguh by 31.93%. The greatest contribution for Maharani came from organware while the rest companies came from humanware. In the future, all of small industries expected to develop technology known by technoware. The Result of internal assessment of Sumiati Export International Corporation by DEA model showed that Maharani in the first position and Rizky in the last position. Technometric model with combination of pairwise comparison AHP aids big companies to make technology assessment to small industries. Keywords: assessment of technology, technometric model, pairwise comparison AHP, DEA

  7. Simulating the evolution of industries using a dynamic behavioural model

    OpenAIRE

    Kunc, Martin

    2004-01-01

    Investment decisions determine that not only the evolution of industries is hard to forecast with certainty but also industries may have different dynamic behaviour and evolutionary paths. In this paper we present a behavioural framework to simulate the evolution of industries. Two factors determine the dynamic behaviour of an industry: managerial decision-making and the interconnected set of resources. Managerial decision-making significantly affects the dynamic behaviour of firms. Bounded r...

  8. What made Britannia great? Did the Industrial Revolution make Britain a world power?

    OpenAIRE

    Clark, Gregory

    2006-01-01

    How much of Britain's high living standards and military power compared to its competitors in 1850 should be attributed to Britain having first experienced the Industrial Revolution? Examining data on real wages in the north and south of England, the Netherlands and Ireland in the Industrial Revolution era, this paper contends that most of the technological advances of the Industrial Revolution benefited Britain's competitors as much as Britain itself. Britain attained higher outputs per pers...

  9. Forest Products Industry of the Future

    Energy Technology Data Exchange (ETDEWEB)

    Los Alamos Technical Associates, Inc

    2002-05-01

    Los Alamos Technical Associates, Inc (LATA) conducted an evaluation of the potential impact and value of a portion of the current portfolio of r&d projects supported by the Office of Industrial Technology and the Forest Products Industry of the Future. The mission of the evaluation was to (a) assess the potential impact of the projects to meet the critical goals of the industry as identified in the vision and roadmapping documents. (b) Evaluate the relationship between the current portfolio of projects and the Agenda 202 Implementation Plan. In addition, evaluate the relationship between the portfolio and the newly revised draft technology strategy being created by the industry. (c) Identify areas where current efforts are making significant progress towards meeting industry goals and identify areas where additional work my be required to meet these goals. (d) Make recommendations to the DOE and the Forest Products Industry on possible improvements in the portfolio and in the current methodology that DOE uses to assess potential impacts on its R&D activities.

  10. Complexity management in the food industry

    DEFF Research Database (Denmark)

    Herbert-Hansen, Zaza Nadja Lee; Jacobsen, Peter

    2017-01-01

    The many stakeholders in the food industry with their diverse interests make this industry complex and interesting to work with. There are four main stakeholders; 1) The customers with their increased demand for customized products, quick delivery times and increased responsiveness, 2) The author......The many stakeholders in the food industry with their diverse interests make this industry complex and interesting to work with. There are four main stakeholders; 1) The customers with their increased demand for customized products, quick delivery times and increased responsiveness, 2...... this complexity and finding a method for using these complexity factors in economic calculations. The research question this paper seeks to address is therefore “Which complexity factors can be quantified in the food industry and how can they be used in economic calculations?” A case study of a SME Danish bread...... producer will address the research question due to the explorative nature of this study and the limited amount of previous research within this field....

  11. Hybrid multiple criteria decision-making methods

    DEFF Research Database (Denmark)

    Zavadskas, Edmundas Kazimieras; Govindan, K.; Antucheviciene, Jurgita

    2016-01-01

    Formal decision-making methods can be used to help improve the overall sustainability of industries and organisations. Recently, there has been a great proliferation of works aggregating sustainability criteria by using diverse multiple criteria decision-making (MCDM) techniques. A number of revi...

  12. Feasible Application Area Study for Linear Laser Cutting in Paper Making Processes

    Science.gov (United States)

    Happonen, A.; Stepanov, A.; Piili, H.

    Traditional industry sectors, like paper making industry, tend to stay within well-known technology rather than going forward towards promising, but still quite new technical solutions and applications. This study analyses the feasibility of the laser cutting in large-scale industrial paper making processes. Aim was to reveal development and process related challenges and improvement potential in paper making processes by utilizing laser technology. This study has been carried out, because there still seems to be only few large-scale industrial laser processing applications in paper converting processes worldwide, even in the beginning of 2010's. Because of this, the small-scale use of lasers in paper material manufacturing industry is related to a shortage of well-known and widely available published research articles and published measurement data (e.g. actual achieved cut speeds with high quality cut edges, set-up times and so on). It was concluded that laser cutting has strong potential in industrial applications for paper making industries. This potential includes quality improvements and a competitive advantage for paper machine manufacturers and industry. The innovations have also added potential, when developing new paper products. An example of these kinds of products are ones with printed intelligence, which could be a new business opportunity for the paper industries all around the world.

  13. Industrial garnet

    Science.gov (United States)

    Olson, D.W.

    2013-01-01

    Garnet has been used as a gemstone since the Bronze Age. However, garnet’s angular fractures, relatively high hardness and specific gravity, chemical inertness and nontoxicity make it ideal for many industrial applications. It is also free of crystalline silica and can be recycled.

  14. MANAGEMENT OF ECONOMIC AND FINANCIAL STRATEGY INDUSTRIAL CORPORATION

    Directory of Open Access Journals (Sweden)

    K. B. Dobrova

    2010-01-01

    Full Text Available Issues related to creation of tools making it possible to efficiently control financial and economic production capability of industrial corporations making part of Russian military-industrial complex are discussed on example of an aviation enterprise. A system of balanced indicators is proposed to be used to develop corporation’s adaptive management strategies.

  15. 2002 Industry Studies: Energy

    Science.gov (United States)

    2002-01-01

    Information technologies have facilitated the rapid growth of electronic market places across the energy industry for trading energy commodities, such as...and information technology industry has further increased the importance of abundant, low-cost, and reliable electric power. Recently, public...California, the country has recently slowed its efforts to make electricity markets more competitive. Recommendations. Unless some technological “silver bullet

  16. Forging Industry-Academic Alliances

    Directory of Open Access Journals (Sweden)

    Joseph M. Woodside

    2014-08-01

    Full Text Available With ever increasing amounts of data, organizations are identifying the importance of Business Intelligence (BI and Analytics for decision making. However in order to realize the full potential of these technologies, organizations require well-trained and educated management and analytic subject matter experts to transform the data and results into actionable information for decisions. In order to meet this demand for analytical talent, a Center for Business Intelligence and Analytics (CBIA housed within the university seeks to develop knowledge and skills vital in the fast changing field of business, through developing the next generation of managers and analysts with skills in decision-making through use of analytical techniques. This presentation provides the strategic framework for the definition and development of a CBIA and framework for joint academic and industry collaboration to develop the next generation of industry experts. The core components including industry demand, alliance objectives including objectives, curriculum and talent requirements, and opportunities.

  17. ROMANIAN FOOTWEAR INDUSTRY-EVOLUTIONS AND CHARACTERISTICS

    OpenAIRE

    OFILEANU DIMI

    2014-01-01

    Footwear industry represents an important sector in national economy. Most of its production goes to export, Romania being the 14th footwear exporter worldwide. The aim of this article is to make an analysis of the evolution of the Romanian footwear industry by presenting the sector’s main indicators, their evolution in the past 20 years and the features of the industry.

  18. An Approach to Integrating Tactical Decision-Making in Industrial Maintenance Balance Scorecards Using Principal Components Analysis and Machine Learning

    Directory of Open Access Journals (Sweden)

    Néstor Rodríguez-Padial

    2017-01-01

    Full Text Available The uncertainty of demand has led production systems to become increasingly complex; this can affect the availability of the machines and thus their maintenance. Therefore, it is necessary to adequately manage the information that facilitates decision-making. This paper presents a system for making decisions related to the design of customized maintenance plans in a production plant. This paper addresses this tactical goal and aims to provide greater knowledge and better predictions by projecting reliable behavior in the medium-term, integrating this new functionality into classic Balance Scorecards, and making it possible to extend their current measuring function to a new aptitude: predicting evolution based on historical data. In the proposed Custom Balance Scorecard design, an exploratory data phase is integrated with another analysis and prediction phase using Principal Component Analysis algorithms and Machine Learning that uses Artificial Neural Network algorithms. This new extension allows better control over the maintenance function of an industrial plant in the medium-term with a yearly horizon taken over monthly intervals which allows the measurement of the indicators of strategic productive areas and the discovery of hidden behavior patterns in work orders. In addition, this extension enables the prediction of indicator outcomes such as overall equipment efficiency and mean time to failure.

  19. Poster Abstract: Towards NILM for Industrial Settings

    DEFF Research Database (Denmark)

    Holmegaard, Emil; Kjærgaard, Mikkel Baun

    2015-01-01

    Industry consumes a large share of the worldwide electricity consumption. Disaggregated information about electricity consumption enables better decision-making and feedback tools to optimize electricity consumption. In industrial settings electricity loads consist of a variety of equipment, whic...... consumption for six months, at an industrial site. In this poster abstract we provide initial results for how industrial equipment challenge NILM algorithms. These results thereby open up for evaluating the use of NILM in industrial settings....

  20. Networks of innovation or networks of opportunity? The making of the Spanish antibiotics industry.

    Science.gov (United States)

    Puig, Nuria

    2004-07-01

    The pharmaceutical industry is a typically research-intensive, first world-industry. This article seeks to explain why it has been so difficult for late industrialised nations to reproduce the networks of innovation on which the design and manufacturing of new drugs has historically based, and why alternative concepts are needed in order to understand the dynamics of science-based industries in emerging countries. The article analyses the development of the Spanish antibiotics industry, build after the World War II under the strong influence of the new international order and Spain's political framework, academic traditions and business groups. Focusing on the long-term relationships established between two Spanish companies (Antibióticos SA and Compañía Española de Penicilina y Antibióticos, CEPA), their American technological partners (Schenley and Merck), and their social and scientific environment, the article identifies networks of opportunity as the key institutional arrangement of this new industry in Spain. Opportunity (as opposed to innovation) networks are thus proposed to conceptualise the development of technologically complex industries in the European periphery.

  1. The Social Industry

    Directory of Open Access Journals (Sweden)

    Christian Sandvig

    2015-04-01

    Full Text Available Historical mass media and contemporary social media are typically seen as opposites. “The culture industry” was the term used by the Frankfurt School in the 1940s to explain the emerging commercial mass media. The culture industry was portrayed as a semi-fascist apparatus of indoctrination. It selected cultural products and made them popular based on obscure determinations of economic value. In contrast, the common view of contemporary social media is that it is more democratic. Using voting algorithms and human voting, social media can finally realize widespread participation that was denied to the passive audiences of the mass media system. Social media appear to remove the bottleneck of the mass media system, allowing everyone to aspire to celebrity, or at least popularity. However, despite these appearances, social media have also now evolved into an elaborate system that selects social products and makes them popular based on obscure determinations of economic value. Social media platforms filter, censor, control, and train—and they may do so without the user’s awareness. Advances in computation now make a social media industry possible that is based on individual difference and action rather than sameness and passivity. But in other respects, the social industry resembles the culture industry: the co-option of culture has been superseded by the co-option of sociality. The word “social” may then be the biggest challenge facing those who study social media. Our task is to rescue genuine sociality from the emerging social industry.

  2. An improved hybrid multi-criteria/multidimensional model for strategic industrial location selection: Casablanca industrial zones as a case study.

    Science.gov (United States)

    Boutkhoum, Omar; Hanine, Mohamed; Agouti, Tarik; Tikniouine, Abdessadek

    2015-01-01

    In this paper, we examine the issue of strategic industrial location selection in uncertain decision making environments for implanting new industrial corporation. In fact, the industrial location issue is typically considered as a crucial factor in business research field which is related to many calculations about natural resources, distributors, suppliers, customers, and most other things. Based on the integration of environmental, economic and social decisive elements of sustainable development, this paper presents a hybrid decision making model combining fuzzy multi-criteria analysis with analytical capabilities that OLAP systems can provide for successful and optimal industrial location selection. The proposed model mainly consists in three stages. In the first stage, a decision-making committee has been established to identify the evaluation criteria impacting the location selection process. In the second stage, we develop fuzzy AHP software based on the extent analysis method to assign the importance weights to the selected criteria, which allows us to model the linguistic vagueness, ambiguity, and incomplete knowledge. In the last stage, OLAP analysis integrated with multi-criteria analysis employs these weighted criteria as inputs to evaluate, rank and select the strategic industrial location for implanting new business corporation in the region of Casablanca, Morocco. Finally, a sensitivity analysis is performed to evaluate the impact of criteria weights and the preferences given by decision makers on the final rankings of strategic industrial locations.

  3. Study of industry safety management

    International Nuclear Information System (INIS)

    Park, Pil Su

    1987-06-01

    This book deals with general remarks, industrial accidents, statistics of industrial accidents, unsafe actions, making machinery and facilities safe, safe activities, having working environment safe, survey of industrial accidents and analysis of causes, system of safety management and operations, safety management planning, safety education, human engineering such as human-machines system, system safety, and costs of disaster losses. It lastly adds individual protective equipment and working clothes including protect equipment for eyes, face, hands, arms and feet.

  4. Skill Transfer and Virtual Training for IND Response Decision-Making: Models for Government-Industry Collaboration for the Development of Game-Based Training Tools

    Science.gov (United States)

    2016-04-01

    game developers with strong creative and technical skills, available inexpensively, and often strongly motivated to make a positive impact on the world...Memarzia, “Societal Impact of a Serious Game on Raising Public Awareness: The Case of FloodSim,” in Proceedings of ACM SIGGRAPH Symposium on Video Games ...mitigated if the sponsoring agency selects an appropriate program structure that leverages existing talent from the video game industry, supports an

  5. Sales promotion and utilization of fuel. Engineering service of the heat industry for industrial companies

    Energy Technology Data Exchange (ETDEWEB)

    Schoen, E. (Ruhrgas A.G., Essen (Germany, F.R.). Abt. E-F)

    1978-01-01

    The contribution illustrates, from the industrial viewpoint, how one may produce process heat rationally and make optimum use of it using natural gas and how competing fuels can be supplanted. The heat economy engineering activities of a modern gas supply undertaking and a few practical examples to improve the industrial produce structure are shown.

  6. Estudio comparativo de microsutura vascular en ratas: punto simple y punto de colchonero horizontal Comparative study about vascular microsurgery on rats: classic interrupted suture versus horizontal mattress suture

    Directory of Open Access Journals (Sweden)

    C. Casado Sánchez

    2009-09-01

    Full Text Available La Microcirugía es la técnica empleada para la realización de la microanastomosis vascular. El objetivo del presente estudio es comparar dos tipos de técnicas de microsutura: los puntos simples clásicos, de empleo habitual en la microcirugía vascular, y los puntos de colchonero horizontales, no evaluados habitualmente para este tipo de cirugía. Fueron intervenidas 20 ratas albinas de la cepa Wistar (peso medio de 250 - 300 gr. bajo anestesia general; realizamos sección transversal en la arteria femoral, procediendo a su reparación microquirúrgica inmediata. Se establecieron 2 grupos de animales: en el grupo A (n=10, la microsutura se hizo mediante 6 puntos sueltos simples, y en el grupo B (n=10, empleando 3 puntos de colchonero horizontal. Comprobamos la patencia en el desclampado inmediato y tras una hora del desclampado (para ambas técnicas fue positiva en el 100% de los casos, y la hemorragia en ambos tiempos (se registró un único caso de sangrado en el postoperatorio inmediato en el grupo B, que requirió la revisión de la microsutura. El tiempo medio de ejecución de la sutura en el grupo B, 15 minutos aproximadamente, fue más corto que en el grupo A, 21 minutos aproximadamente, diferencia estadísticamente significativa (p Microsurgery is the procedure of choice for vascular microanastamoses. The objective of this study was to compare two types of suture techniques: classic interrupted suture anastomoses, commonly used for vascular anastamoses in microsurgery, and another technique using horizontal mattress sutures, rarely evaluated in this type of surgery. Twenty albino Wistar rats were operated (average weight: 250 - 300 gr. under general anaesthesia. A transverse section of the femoral artery was performed and immediately followed by an anastamoses. The animals were placed into two groups of ten. The classic 6 interrupted suture anastomoses technique was performed in group A (n = 10 and another technique using 3

  7. 2016 Bioenergy Industry Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Moriarty, Kristen L. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Milbrandt, Anelia R. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Warner, Ethan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Lewis, John E. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Schwab, Amy A. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2018-03-03

    This report provides a snapshot of the bioenergy industry status at the end of 2016. The report compliments other annual market reports from the U.S. Department of Energy’s (DOE’s) Office of Energy Efficiency and Renewable Energy offices and is supported by DOE’s Bioenergy Technologies Office (BETO). The 2016 Bioenergy Industry Status Report focuses on past year data covering multiple dimensions of the bioenergy industry and does not attempt to make future market projections. The report provides a balanced and unbiased assessment of the industry and associated markets. It is openly available to the public and is intended to compliment International Energy Agency and industry reports with a focus on DOE stakeholder needs.

  8. New Product Development in Traditional Industries: Decision-Making Revised

    Directory of Open Access Journals (Sweden)

    Jon Mikel Zabala-Iturriagagoitia

    2012-02-01

    Full Text Available This paper investigates whether decisions considered as common in new product development literature are also valid in a region characterized by traditional industries. The research is grounded on innovative companies in the Valencian Region (Spain. Using the statistical tool of factor analysis, we test if the groups of decisions identified by the literature can be confirmed in our empirical sample. Therewith, we aim to link the theoretical and empirical fields in the context of new product development and product innovation management.

  9. Financial risk of the biotech industry versus the pharmaceutical industry.

    Science.gov (United States)

    Golec, Joseph; Vernon, John A

    2009-01-01

    The biotech industry now accounts for a substantial and growing proportion of total R&D spending on new medicines. However, compared with the pharmaceutical industry, the biotech industry is financially fragile. This article illustrates the financial fragility of the biotech and pharmaceutical industries in the US and the implications of this fragility for the effects that government regulation could have on biotech firms. Graphical analysis and statistical tests were used to show how the biotech industry differs from the pharmaceutical industry. The two industries' characteristics were measured and compared, along with various measures of firms' financial risk and sensitivity to government regulation. Data from firms' financial statements provided accounting-based measures and firms' stock returns applied to a multifactor asset pricing model provided financial market measures. The biotech industry was by far the most research-intensive industry in the US, averaging 38% R&D intensity (ratio of R&D spending to total firm assets) over the past 25 years, compared with an average of 25% for the pharmaceutical industry and 3% for all other industries. Biotech firms exhibited lower and more volatile profits and higher market-related and size-related risk, and they suffered more negative stock returns in response to threatened government price regulation. Biotech firms' financial risks increase their costs of capital and make them more sensitive to government regulations that affect their financial prospects. As biotech products grow to represent a larger share of new medicines, general stock market conditions and government regulations could have a greater impact on the level of innovation of new medicines.

  10. China’s Ordnance Industry Under Modernization

    OpenAIRE

    Ding, Arthur

    2010-01-01

    China’s ordnance industry is undertaking industry-wide reform. The goal is to improve indigenous innovation capability so that the Chinese armed forces can obtain advanced weapon systems without reliance on foreign technology while at the same time making the industry responsible for its own financial performance. Restructuring has resulted in some gains, but indigenous innovation capability, as well as spin-on and spin-off, are still far in the future.

  11. The apparel industry in West Europe

    OpenAIRE

    Hilger, Jan

    2009-01-01

    The Apparel Industry was one of the first globally operating industries. Already in the early 1970ies did European fashion companies extend their manufacturing workbenches into lower cost neighbouring countries, making it one of the first industries to have a globally distributed network. In the first decade of the 21st century, the conditions for clothes manufacturing has changed considerably. The Sourcing Share of Asia increased dramatically especially since Chinas partici...

  12. Process Industry and Energy Savings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    Over a period of two years the NAP's Special Interest Group Energy (SIG-E) has dedicated itself to studying the way in which the process industry and its supply chain has been dealing with energy as a theme. In the past it was strongly believed that many opportunities were left unused and that different forms of cooperation inside the chain should contribute to accelerated improvement of energy efficiency in the process industry. Sixteen companies that are actively involved in the entire value chain have scrutinised their daily situation wondering how to operate more successfully. With approximately one quarter of total energy consumption the Dutch process industry is a major player in reaching national energy and climate objectives by 2020. The objective (improve energy efficiency by 2% annually) is as ambitious as that 'business as usual' is insufficient. A drastic change in how matters are approached is thus essential. The question is how to proceed? By analysing energy projects, in-depth interviews with decision makers in the industry, through literature searches and by organising lectures inside and outside the sector, SlG-E has been able to develop a true picture of the mechanisms concerning energy-related investments. Two major points of interest have been energy-oriented tendering (demand side) and the market introduction of innovations (supply side). The main problems of 'how to do more in the energy domain' is: (a) the process industry is insufficiently familiar with the capabilities of the supply chain, and (b) the supply chain is insufficiently aware of the questions that exist in the process industry. Therefore, the links in the value chain understand each other poorly. The answer to this problem is compound and consists of more interaction between the process industry and the supply chain (machine constructors, engineering firms and consultancies, education and research). As for the process industry: (a) Make improved energy

  13. Regional industrial policy and the new agenda for growth

    DEFF Research Database (Denmark)

    Gjerding, Allan Næs

    2005-01-01

    Even though the structural reform of the Danish administrative three-tier system in general implies a centralisation of the policy decision-making process, centralisation may not apply entirely to the field of industrial policy as the result of the implementation of the new national law on indust......Even though the structural reform of the Danish administrative three-tier system in general implies a centralisation of the policy decision-making process, centralisation may not apply entirely to the field of industrial policy as the result of the implementation of the new national law...... on industrial development. Describing the implications of the law in terms of the changes of the regional setting for industrial policy and the ensuing focus on a new agenda for growth, the paper devotes its attention to the region of North Jutland that has been designated as a test case for the organisational...... coalitions rather than centralising the decision mak-ing power. However, since the political bodies involved in industrial policy will become fewer, more powerful and more focussed on industrial policy, goal conflicts are likely to oc-cur in the future....

  14. THE IMPORTANCE OF THE QUALITATIVE CHARACTERISTICS OF ACCOUNTING INFORMATION FOR DECISION MAKING . EMPIRICAL STUDY CONDUCTED IN THE HOSPITALITY INDUSTRY IN ROMANIA

    Directory of Open Access Journals (Sweden)

    2015-07-01

    Full Text Available Hospitality industry is a sector of the national and world economy facing one of the most dynamic developments of the third millennium as if against the fact that it does not only face challenges of the economic crisis, but also the changes in the market, the perception and consumer behavior and of technological trends . The contribution of accounting to the accomplishment of strategic objectives of the business managers in hospitality and tourism industry, is manifested in the form of ensuring the information necessary for monitoring, determining the degree of liability and the effect, at various jobs, which allows the detection of internal reserves, of uneconomic and unnecessary expenses and of losses. Convinced of the vital importance of accounting information for all sectors of activity, and hence the hospitality and tourism industry, but also motivated by the unexplored potential in this sector we wanted to find "live" the perception of Romanian hospitality industry managers on the usefulness of accounting information, especially of that provided by management accounting, and how to exploit it in decision making process. Therefore, we pondered it was time to get into the "natural environment" of managers in the hospitality industry and find "at home in the field", for we can say that work is a second home, which is the importance given to the accounting information, which management accounting practices apply to survive in a market that offers many opportunities, yet many challenges, too. The entry into the natural environment was made by empirical research and is based on a survey conducted between November 2012 and January 2013, using a questionnaire as a tool consisting of 38 questions, administered online and on location to managers in the Bihor hospitality industry. The total population consisted of 146 entities in this sector, the sample being made up of 91 tourism entities, with a response rate of 62.33%, due to movements in the

  15. Australian Industry Development Corporation annual report 1984

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    AIDC is a statutory corporation wholly owned and guaranteed by the Commonwealth of Australia. Its objects are to promote Australian industry and Australian ownership in industry. The corporation is a financial enterprise operating on commercial principles. It is engaged in the business of borrowing money, making loans and making equity investments. It also provides related financial advisory and other services, including lead management of syndicated project financings. This annual report looks at the highlights of 1983/84; a five year summary of operations; lists the Board of Directors; some executives; includes a Directors report on development finance, industry and funds management; a management structure; statistical tables; executives and a 22 page financial statement.

  16. Mapping of wine industry

    Directory of Open Access Journals (Sweden)

    Віліна Пересадько

    2016-10-01

    Full Text Available Having reviewed a variety of approaches to understanding the essence of wine industry, having studied the modern ideas about the future of wine industry, having analyzed more than 50 maps from the Internet we have set the trends and special features of wine industry mapping in the world, such as: - the vast majority of maps displays the development of the industry at regional or national level, whereas there are practically no world maps; - wine-growing regions are represented on maps very unevenly; - all existing maps of the industry could be classified as analytical ascertaining inventory type; - the dominant ways of cartographic representation are area method and qualitative background method, sign method and collation maps are rarely used; - basically all the Internet maps have low quality as they are scanned images with poor resolution; - the special feature of maps published lately is lack of geographical basis (except for state borders and coastline. We created wine production and consumption world map «Wine Industry» in the scale of 1:60 000 000 with simple geographical basis (state names, state borders, major rivers, coastline. It was concluded that from the methodological point of view it is incorrect not to show geographical basis on maps of wine industry. Analysis of this map allowed us to identify areas of traditional wine-making, potential wine-making areas and countries which claim to be the world leaders in the field of wine production. We found disbalans between wine production and wine consumption - increasing wine production in South America, China and the United States and increasing wine consumption (mainly due to the import products in countries where the grape is not the primary agricultural product.

  17. Co-evolution of Industry Strategies and Government Policies: The Case of the Brazilian Automotive Industry

    Directory of Open Access Journals (Sweden)

    Roberto Gonzalez Duarte

    2017-07-01

    Full Text Available This study examines the evolution of the automotive industry in Brazil and its key drivers. We argue that the rules of the game – industry policies – are an outcome of exchanges between the host government and industry. These arise from changes in economic and political environments and interdependence between industry and the country’s economy. To this end, we draw upon literature on institutions and co-evolution to understand the industry footprint over a 50-year period, as well as its relationship with changes in government policies. This study generates new insights on institutional and co-evolution political perspectives by showing that the rules of the game are not only the making of the government, but are also the result of interdependencies between industry and government.

  18. Screening of Industrial Development Policies, Plans and Programs of Strategic Environmental Assessment in the Industrial Sector of Iran

    OpenAIRE

    J. Nouri; B. Maghsoudlou Kamali

    2005-01-01

    The present investigation deals with the quality of capacity building and institutional strengthening of Strategic Environmental Assessment (SEA) in the industrial sector as well as determining the environmental strategies for industrial sustainable development in Iran. The leading aim of this paper has been to systematize the environmental considerations in industrial development strategies, policies, plans and programs in the highest strategic decision making processes and to ensure environ...

  19. Physics in Industry: A Case Study

    Science.gov (United States)

    Pratt-Ferguson, Ben

    2007-10-01

    Often ignored and sometimes even considered ``black sheep'' by the university & government-lab physicists, many industrial physicists continue making valuable scientific contributions in diverse areas, from computer science to aero and thermo-dynamics, communications, mathematics, engineering, and simulation, to name a few. This talk will focus on what industrial physicists do, what preparations are beneficial to obtaining a first industrial job, and what the business environment is like for physicists. The case study will be that of the author, starting with undergraduate and graduate studies and continuing on to jobs in industry.

  20. Metals industry seeks economic comeback

    International Nuclear Information System (INIS)

    Nappi, C.

    1993-01-01

    The North American minerals and metals industry has experienced a shockwave of change during the past two decades but is making a gallant comeback attempt, says Carmine Nappi, a mineral economist at the University of Montreal in Canada. Beginning in the mid-1970s, demand for major metals-aluminum, copper, lead, nickel, and zinc-dropped precipitately as the industrialized world shifted from a products to a services economy and as manufacturers discovered ways to make their products lighter, smaller, and more efficient. At the same time, Nappi says, rising energy and environmental costs pushed mining costs upward and squeezed profit margins, while foreign competitors stepped up their pressure. As a result, more than 7,000 US jobs in the minerals and metals industry were lost between 1980 and 1985. The value of mining production dropped $3.3 billion, and the industry went from $1.9 billion in profits to $900 million in losses. The industry responded to the crisis in different ways, Nappi says. Most zinc producers simply shut down, and many aluminum smelters, especially in the Southeast, also became resigned to their fate. Copper producers, however, fought back, changed the ways they did business, and survived. While conceding that the North American minerals and metals industry may never be as robust again as it was two decades ago, Nappi says the recent changes have slowed, and in some cases reversed, the hemorrhaging

  1. Capitalizing the contribution of the nuclear industry

    International Nuclear Information System (INIS)

    Donnadieu, G.

    1984-01-01

    The main contributions of the French nuclear industry to the country, and ways to make the most of them are presented. The advantages acquired include the nuclear power stations built; mastering of the combustion cycle; a powerful, well structured nuclear construction industry; and a nuclear-industrial complex giving France an important industrial potential. It is recommended that the industrial and research effort be maintained. The proposed strategy consists of defining an electronuclear program and associated economic development program and sticking to them; promoting exports; possibly merging certain industrial capacities; and strengthening the national position and independence concerning the fuel cycle [fr

  2. Pharmacist-industry relationships.

    Science.gov (United States)

    Saavedra, Keene; O'Connor, Bonnie; Fugh-Berman, Adriane

    2017-12-01

    The purpose of this study was to document, in their own words, beliefs and attitudes that American pharmacists have towards the pharmaceutical industry and pharmacists' interactions with industry. An ethnographic-style qualitative study was conducted utilizing open-ended interviews with four hospital pharmacists, two independent pharmacists, two retail pharmacists and one administrative pharmacist in the Washington, DC, metropolitan area to elicit descriptions of and attitudes towards pharmacists' relationships with industry. Analysis of the qualitative material followed established ethnographic conventions of narrative thematic analysis. All pharmacists reported interactions with pharmaceutical company representatives. Most had received free resources or services from industry, including educational courses. Respondents uniformly believed that industry promotional efforts are primarily directed towards physicians. Although respondents felt strongly that drug prices were excessive and that 'me-too' drugs were of limited use, they generally had a neutral-to-positive view of industry-funded adherence/compliance programmes, coupons, vouchers, and copay payment programmes. Interviewees viewed direct-to-consumer advertising negatively, but had a generally positive view of industry-funded drug information. Pharmacists may represent a hitherto under-identified cohort of health professionals who are targeted for industry influence; expanding roles for pharmacists may make them even more attractive targets for future industry attention. Pharmacy schools should ensure that students learn to rely on unbiased information sources and should teach students about conflicts of interest and the risks of interacting with industry. Further research should be conducted on the extent to which pharmacists' attitudes towards their duties and towards drug assessment and recommendation are influenced by the pharmaceutical industry. © 2017 Royal Pharmaceutical Society.

  3. INDUSTRY-ENVIRONMENT PERCEPTION OF COLLEGE STUDENTS OF INDUSTRIAL ENGINEERING

    Directory of Open Access Journals (Sweden)

    Quetzalli Aguilar-Virgen

    2015-12-01

    Full Text Available The aim of this study was to analyze the perception of college students about their role in minimizing environmental impacts, applying the philosophy of SCP (sustainable consumption and production. It was designed and validated a questionnaire; which it was applied to 288 students with a confidence level of 95% and 10% error. Students are aware of the need to optimize their processes and make their businesses profitable. However, they lack more knowledge tools SCP to make the most effective, efficient and environmentally friendly processes. It is necessary for industry-environment paradigm change to achieve more sustainable production systems.

  4. Supply chain collaboration in industrial symbiosis networks

    NARCIS (Netherlands)

    Herczeg, Gábor; Akkerman, Renzo; Hauschild, Michael Zwicky

    2018-01-01

    A strategy supporting the development towards a circular economy is industrial symbiosis (IS). It is a form of collaborative supply chain management aiming to make industry more sustainable and achieve collective benefits based on utilization of waste, by-products, and excess utilities between

  5. Outlook for California's electric utility industry

    International Nuclear Information System (INIS)

    Frank, S.E.

    1996-01-01

    This article describes how the Southern California Edison Company deals with revolutionary change as the state's electricity industry reinvents itself. The topics of the article include how competition has make things better for SCEC's employees, customers, and shareholders, and an outline of the principal features of the electric utility industry in California

  6. Precisionism: Art in the Industrial Age

    Science.gov (United States)

    McMullen, Brianna

    2006-01-01

    A result of the industrial age was a short-lived but powerful new American art movement called Precisionism, most evident in painting, but visible also in drawing, photography, and print-making, focusing on industrial and mechanical subjects. Precisionism originated in the 1920s, allied with European Cubism's fascination with shape and geometric…

  7. Industrial gases

    International Nuclear Information System (INIS)

    Hunter, D.; Jackson, D.; Coeyman, M.

    1993-01-01

    Industrial gas companies have fought hard to boost sales and hold margins in the tough economic climate, and investments are well down from their 1989-'91 peak. But 'our industry is still very strong long term' says Alain Joly, CEO of industry leader L'Air Liquide (AL). By 1994, if a European and Japanese recovery follows through on one in the U.S., 'we could see major [investment] commitments starting again,' he says. 'Noncryogenic production technology is lowering the cost of gas-making possible new applications, oxygen is getting plenty of attention in the environmental area, and hydrogen also fits into the environmental thrust,' says Bob Lovett, executive v.p./gases and equipment with Air Products ampersand Chemicals (AP). Through the 1990's, 'Industrial gases could grow even faster than in the past decade,' he says. Virtually a new generation of new gases applications should become reality by the mid-1990s, says John Campbell, of industry consultants J.R. Campbell ampersand Associates (Lexington, MA). Big new oxygen volumes will be required for powder coal injection in blast furnaces-boosting a steel mill's requirement as much as 40% and coal gasification/combined cycle (CGCC). Increased oil refinery hydroprocessing needs promise hydrogen requirements

  8. Nuclear measurements in industry

    International Nuclear Information System (INIS)

    Rozsa, S.

    1989-01-01

    In this book the author provides a description of nuclear measurements in industry, covering the physical principles, methods, instruments and equipment, and industrial applications. One of the great advantages of industrial nuclear measurements is that their use ensures the optimum use of raw material. The increasing cost of raw materials makes it essential to adhere strictly to the standards and prescriptions related to the product and this is possible only by the application of continuous and accurate measurements. As a result, the importance of nuclear instruments is rapidly growing particularly in fields where the application of alternative methods is not possible. This is illustrated by several practical examples described in the book. Similarly important are nuclear measuring the process control equipment which serve to optimize the use of energy in industrial processes

  9. Strategic decisions in turbulent times: lessons from the energy industry

    DEFF Research Database (Denmark)

    Giones, Ferran; Brem, Alexander; Berger, Andreas

    2019-01-01

    of time, traditional business models eroded, and dominant players lost their positions in the industry. Based on personal interviews with the CEOs from RWE (Germany) and NRG (USA) we analyze how they led the transformation of their organizations. We get immersed in their decision-making processes......Most of the firms currently in the S&P 500 will probably not be part of this list in 15 years. In times of great uncertainty managers are called to make the right choices in their strategy, they are asked to preserve the core businesses, and to prepare their organizations for an unclear future. How...... can managers make the right choices when the whole industry is under transformation? In this light, we explore how the popular VUCA framework can help to make sense of turbulent contexts and drive the decision-making of managers. We study the case of the energy industry, where, in a short period...

  10. Chromatography in Industry

    Science.gov (United States)

    Schoenmakers, Peter

    2009-07-01

    This review focuses on the chromatography research that has been carried out within industry or in close cooperation with industry and that has been reported in the scientific literature between 2006 and mid-2008. Companies in the health care sector, such as pharmaceutical and biotechnology companies, are the largest contributors. Industrial research seems to take place in an open environment in cooperation with academia, peer companies, and institutions. Industry appears ready to embrace new technologies as they emerge, but they focus strongly on making chromatography work robustly, reliably, rapidly, and automatically. “Hyphenated” systems that incorporate on-line sample-preparation techniques and mass-spectrometric detection are the rule rather than the exception. Various multidimensional separation methods are finding numerous applications. Strategies aimed at speeding up the development of new chromatographic methods remain the focus of attention. Also, there is a clear trend toward exploring chromatographic methods for parallel processing along with other strategies for high-throughput analysis.

  11. Research into industrial technology policy trends in Australia. Role of government in promoting industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The paper reported the investigation into strategies of industrial technology, results of the R and D support plans, management of support fund plans, etc. by the Australian government. The present government introduced policies on industrial innovation and industrial technology, research and higher education, etc. from the end of 1997 to the end of 1999. Especially, recently the R and D preferential taxation system was introduced. As to organizations pertaining to science, technology, engineering and innovation, PMSEIC (prime minister's science, engineering and innovation council) under the direct control of prime minister is a top self-supporting organization, in which minister from each ministry join. Further, the assembly committee, which is not the bureaucratic organization, was separately established. In February 2000, the innovation summit was held, in which a lot of organizations from the industrial circle, government and research institutes participated. The conclusion was as follows: Australia is now at the crossroads of the resource dependent economy. The solution adopted in the past cannot meet the age of new knowledge. The rapidly advancing globalization makes the society more competitive. Enterprises that avoid the innovative investment are to expose themselves to danger. Australia is requested to make continued efforts for more innovative creation. (NEDO)

  12. Research into industrial technology policy trends in Australia. Role of government in promoting industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    The paper reported the investigation into strategies of industrial technology, results of the R and D support plans, management of support fund plans, etc. by the Australian government. The present government introduced policies on industrial innovation and industrial technology, research and higher education, etc. from the end of 1997 to the end of 1999. Especially, recently the R and D preferential taxation system was introduced. As to organizations pertaining to science, technology, engineering and innovation, PMSEIC (prime minister's science, engineering and innovation council) under the direct control of prime minister is a top self-supporting organization, in which minister from each ministry join. Further, the assembly committee, which is not the bureaucratic organization, was separately established. In February 2000, the innovation summit was held, in which a lot of organizations from the industrial circle, government and research institutes participated. The conclusion was as follows: Australia is now at the crossroads of the resource dependent economy. The solution adopted in the past cannot meet the age of new knowledge. The rapidly advancing globalization makes the society more competitive. Enterprises that avoid the innovative investment are to expose themselves to danger. Australia is requested to make continued efforts for more innovative creation. (NEDO)

  13. Thinking Globally: How ISO 50001 - Energy Management can make industrial energy efficiency standard practice

    Energy Technology Data Exchange (ETDEWEB)

    McKane, Aimee; Desai, Deann; Matteini, Marco; Meffert, William; Williams, Robert; Risser, Roland

    2009-08-01

    Industry utilizes very complex systems, consisting of equipment and their human interface, which are organized to meet the production needs of the business. Effective and sustainable energy efficiency programs in an industrial setting require a systems approach to optimize the integrated whole while meeting primary business requirements. Companies that treat energy as a manageable resource and integrate their energy program into their management practices have an organizational context to continually seek opportunities for optimizing their energy use. The purpose of an energy management system standard is to provide guidance for industrial and commercial facilities to integrate energy efficiency into their management practices, including fine-tuning production processes and improving the energy efficiency of industrial systems. The International Organization for Standardization (ISO) has identified energy management as one of its top five priorities for standards development. The new ISO 50001 will establish an international framework for industrial, commercial, or institutional facilities, or entire companies, to manage their energy, including procurement and use. This standard is expected to achieve major, long-term increases in energy efficiency (20percent or more) in industrial, commercial, and institutional facilities and to reduce greenhouse gas (GHG) emissions worldwide.This paper describes the impetus for the international standard, its purpose, scope and significance, and development progress to date. A comparative overview of existing energy management standards is provided, as well as a discussion of capacity-building needs for skilled individuals to assist organizations in adopting the standard. Finally, opportunities and challenges are presented for implementing ISO 50001 in emerging economies and developing countries.

  14. How isotopes benefit industry

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1967-02-15

    The life of bus engines and the time taken to make beer are not at first sight connected with atomic energy. Yet the first has been considerably lengthened and the second even more considerably shortened in different countries as a result of using nuclear techniques and materials. They are only two examples; there are many others which have improved efficiency in factories, oilfields, chemical plants and other industries. They indicate not only the results of ingenuity but the rewards possible from more widespread use of the new methods. At a symposium on radioisotope tracers in industry and geophysics organized by the Agency and held in Prague during November many reports showed not only what is possible but what is actually being accomplished in a number of industries as a matter of daily routine. The economic benefits were also demonstrated, and although the developments have been mainly in countries already highly industrialized, the potential for new industries in developing countries was clear. Research to improve performance of motorcar, aircraft and tractor engines has been directed at establishing the causes of friction, corrosion and wear. In brewing beer it has been possible to accelerate fermentation. Pollution both of water and air can be reduced and methods of waste disposal improved. Many economies have been effected in oil production. Better quality and lower costs have resulted from work in chemical plants and processes such as glass making, metal refining, plastics and many others. Dams and railways were also mentioned among the great variety of subjects suitable for radioisotope techniques

  15. How isotopes benefit industry

    International Nuclear Information System (INIS)

    1967-01-01

    The life of bus engines and the time taken to make beer are not at first sight connected with atomic energy. Yet the first has been considerably lengthened and the second even more considerably shortened in different countries as a result of using nuclear techniques and materials. They are only two examples; there are many others which have improved efficiency in factories, oilfields, chemical plants and other industries. They indicate not only the results of ingenuity but the rewards possible from more widespread use of the new methods. At a symposium on radioisotope tracers in industry and geophysics organized by the Agency and held in Prague during November many reports showed not only what is possible but what is actually being accomplished in a number of industries as a matter of daily routine. The economic benefits were also demonstrated, and although the developments have been mainly in countries already highly industrialized, the potential for new industries in developing countries was clear. Research to improve performance of motorcar, aircraft and tractor engines has been directed at establishing the causes of friction, corrosion and wear. In brewing beer it has been possible to accelerate fermentation. Pollution both of water and air can be reduced and methods of waste disposal improved. Many economies have been effected in oil production. Better quality and lower costs have resulted from work in chemical plants and processes such as glass making, metal refining, plastics and many others. Dams and railways were also mentioned among the great variety of subjects suitable for radioisotope techniques

  16. The gas industry in the year 2020

    International Nuclear Information System (INIS)

    Chabrelie, M.F.

    2006-01-01

    Having been reserved for decades primarily for the more noble uses of industry, natural gas, which basically has no captive market, is now the energy of choice in a multitude of applications. Although gas resources are limited in the very long term, they are yet sufficiently abundant to make a major contribution to the energy industry of the 21. century. Endowed with intrinsic qualities that make it less pollutant than its competitors, natural gas is the commercial energy harboring the strongest growth potential in the future energy balance. (author)

  17. The gas industry in the year 2020

    Energy Technology Data Exchange (ETDEWEB)

    Chabrelie, M.F

    2006-07-01

    Having been reserved for decades primarily for the more noble uses of industry, natural gas, which basically has no captive market, is now the energy of choice in a multitude of applications. Although gas resources are limited in the very long term, they are yet sufficiently abundant to make a major contribution to the energy industry of the 21. century. Endowed with intrinsic qualities that make it less pollutant than its competitors, natural gas is the commercial energy harboring the strongest growth potential in the future energy balance. (author)

  18. Industrial power takes new directions

    International Nuclear Information System (INIS)

    Smith, D.J.

    1992-01-01

    The line between industrial power producers, non-utility power producers, and more specifically cogenerators, is no longer clear. Some industrials still own and operate their own power plants; others have become equity partners in third-party plants. Many industrial complexes have their steam and electrical power requirements supplied by third-party cogeneration plants. This paper reports that one of the major reasons industrial plants choose third-party cogeneration over self-generation is economics. Rather than spend capital on non-revenue projects such as power plants, manufacturers prefer to invest in profit-making ventures. Responding to the recent environmental awareness of many communities, industrial power plants are now collaborating with electric utilities to address environmental concerns. One way this is being accomplished is the dispatching of power plants for localized NO x reduction

  19. An alternative approach to industrial radiography

    International Nuclear Information System (INIS)

    Broadhead, P.

    1981-01-01

    An alternative to industrial X-ray film for industrial radiography is described. The experimental system uses film containing approximately 35% of the silver in an industrial type film, which makes the film easier to process, and uses high resolution phosphor screens, which improves the absorption of X-ray photons. Those properties that affect image quality, namely contrast, modulation transfer function and granularity, are discussed in detail for both types of system. A study of low contrast detail in radiographs indicates that for noise limited information the experimental system offers a higher quality than industrial X-ray film of similar speed. (author)

  20. Industry 4.0 implies lean manufacturing: Research activities in industry 4.0 function as enablers for lean manufacturing

    Directory of Open Access Journals (Sweden)

    Adam Sanders

    2016-09-01

    Full Text Available Purpose: Lean Manufacturing is widely regarded as a potential methodology to improve productivity and decrease costs in manufacturing organisations. The success of lean manufacturing demands consistent and conscious efforts from the organisation, and has to overcome several hindrances. Industry 4.0 makes a factory smart by applying advanced information and communication systems and future-oriented technologies. This paper analyses the incompletely perceived link between Industry 4.0 and lean manufacturing, and investigates whether Industry 4.0 is capable of implementing lean. Executing Industry 4.0 is a cost-intensive operation, and is met with reluctance from several manufacturers. This research also provides an important insight into manufacturers’ dilemma as to whether they can commit into Industry 4.0, considering the investment required and unperceived benefits. Design/methodology/approach: Lean manufacturing is first defined and different dimensions of lean are presented. Then Industry 4.0 is defined followed by representing its current status in Germany. The barriers for implementation of lean are analysed from the perspective of integration of resources. Literatures associated with Industry 4.0 are studied and suitable solution principles are identified to solve the abovementioned barriers of implementing lean. Findings: It is identified that researches and publications in the field of Industry 4.0 held answers to overcome the barriers of implementation of lean manufacturing. These potential solution principles prove the hypothesis that Industry 4.0 is indeed capable of implementing lean. It uncovers the fact that committing into Industry 4.0 makes a factory lean besides being smart. Originality/value: Individual researches have been done in various technologies allied with Industry 4.0, but the potential to execute lean manufacturing was not completely perceived. This paper bridges the gap between these two realms, and identifies

  1. RUSSIAN INDUSTRY INVESTMENT SITUATION

    Directory of Open Access Journals (Sweden)

    O. V. Pochukaeva

    2011-01-01

    Full Text Available The actual deficiency of investment into Russian industry innovative development increases its technological drag from industries of countries with developed markets. Although the rate of investment into real sectors of Russian economics mid 2000 was higher compared to the previous period, annual investment amounts were much lower than in 1990. At present, highest investment amounts are directed to industry extractive branches and to the commerce. Amounts invested to various economy branches do not correspond to their contribution to the country’sGross Added Product; particularly underinvested are manufacturing industry branches. At present, foreign share in the country economy total investment makes 15–18%. Recently, most interesting for foreigners was investment to machine-building branches with overwhelming part (for example, 90% in 2007–2008 of foreign investment into the machine-building industry being directed to creation of new automobile plants. Today, first place in the list of foreign investors’ preferences in Russia is taken by the machine-tool construction sector.

  2. Preliminary cost estimating for the nuclear industry

    International Nuclear Information System (INIS)

    Klumpar, I.V.; Soltz, K.M.

    1985-01-01

    The nuclear industry has higher costs for personnel, equipment, construction, and engineering than conventional industry, which means that cost estimation procedures may need adjustment. The authors account for the special technical and labor requirements of the nuclear industry in making adjustments to equipment and installation cost estimations. Using illustrative examples, they show that conventional methods of preliminary cost estimation are flexible enough for application to emerging industries if their cost structure is similar to that of the process industries. If not, modifications can provide enough engineering and cost data for a statistical analysis. 9 references, 14 figures, 4 tables

  3. Analysis for making a regulatory decision to equipment of industrial gammagraphy in Argentin

    International Nuclear Information System (INIS)

    Ermacora, Marcela G.; Vidal, Dora N.; Alonso, Maria T.

    2013-01-01

    Industrial gammagraphy is a practice widely used as a nondestructive testing technique in Argentina. Experience worldwide has shown the need for an improvement in the intrinsic safety of the equipment used in this lab. In response to this reason, the board of the Nuclear Regulatory Authority (ARN) has considered a proposal to withdraw service movement and much of the equipment inventory scan belonging to industrial facilities nationwide. The main objective of this paper is to present the results of the analysis performed to support the above proposal. The main elements of evaluation can be summarized as follows: I) the teams that do not conform to international recommendations regarding compliance with key safety requirements of international standards such as ISO 3999:2004 (E) R adiation protection - Industrial Apparatus for gamma radiography - Specifications for performance, design and tests ; II) the decision by some manufacturers to discontinue production of certain models of equipment and the provision of spare parts, and III) the validity of certificates bulk type B (U) for transport. In conclusion, it highlights the importance of a regulatory decision supplementary to the Standard AR 7.9.1 concerning the operation of scan equipment industry, based on current international recommendations and Argentina's commitment to good practice and safety culture which can lead to a positive impact on radiation safety in this art

  4. Performance evaluation of the conventional Brazilian industries radiation protection in the small industrial gauges and industrial radiography areas; Sistema de avaliacao de desempenho em radioprotecao das industrias convencionais brasileiras nas areas de medidores nucleares e radiografia industrial

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Joyra Amaral dos

    1999-08-01

    This works evaluates by punctuation the performance in conventional Brazilian industries radiation protection area which make use of small industrial gauges and industrial radiography. It proposes, procedures for industry self-evaluation, besides a new radiation protection plans pattern for the small industrial gauges area. The data source where inspection reports of Dosimetry Radiation Protection Institute/Nuclear Energy Commission conventional Brazilian industries' radiation protection plans, beyond visitation to the inspection place. The performance evaluation has been realized both in the administrative and operational aspects of the industries. About of 60% of the industries have a satisfactory register control which does not happen to the operational control. The performance evaluation advantage is that industries may self-evaluate, foreseeing Dosimetry Radiation Protection Institute's regulation inspections, correcting its irregularities, automatically improving its services. The number of industries which have obtained satisfactory performance in both areas is below 70%, both in administrative and operational aspects. Such number can be considered a low one as it is radiation protection. The procedures propose in this work aim to improve such a situation. (author)

  5. Industrial Pollution in Ghana: Some Selected Case Studies of Industries in Tema

    International Nuclear Information System (INIS)

    Taylor, Nora Priscilla Ama Kuma

    1999-09-01

    purification and the results compared. Most of the methods decreased the levels of pollutants determined in the earlier investigations. Biochemical Oxygen Demand, nitrate, phosphate, conductivity, turbidity and colour of the waste waters were brought significantly to the acceptable limits of World Health Organization and Environmental Protection Agency and trace metals were reduced, in some cases to below detectable limits making the waters safe for re-use domestically and industrially. Sand filtration stood out as the single best method for the treatment of the wastewaters. The easy availability and affordability of sand coupled with the simplicity of its use in filtration should make it a convenient method for the treatment of impure water on a small scale in industry as well as in homes and farmsteads (au)

  6. Strategic Alliance Decision-Making for the Auto Industry Base on an Integrate DEA and GM(1,1 Approach

    Directory of Open Access Journals (Sweden)

    Nan Wang

    2015-11-01

    Full Text Available Strategic alliance promotes enterprise resources sharing and enhances the competitiveness of the marketplace. Therefore, finding a mutually beneficial partner to make a strategic alliance is an important issue for various industries. The aim of this paper is to propose a suitable method based on Grey theory and Data Envelopment Analysis (DEA. A method predicts future business and measure operation efficiency, by the use of critical input and output variables. From this, firms can find out their appropriate candidates. This research was implemented with realistic public data from four consecutive financial years (2009-2012 of twenty Auto Manufactures. The study tries to help target firm find the right alliance partners. The results show the most priori candidates in recent years. The study will be of interest for managers of Auto Manufacture in utilizing alliance strategy.

  7. Making aerospace technology work for the automotive industry, introduction

    Science.gov (United States)

    Olson, W. T.

    1978-01-01

    NASA derived technology already in use in the automotive industry include: (1) developments in electronics design, computer systems, and quality control methods for line testing of cars and trucks; (2) a combustion analysis computer program for automotive engine research and development; (3) an infrared scanner and television display for analyzing tire design and performance, and for studying the effects of heat on the service life of V-belts, shock mounts, brakes, and rubber bearings; (4) exhaust gas analyzers for trouble shooting and emissions certification; (5) a device for reducing noise from trucks; and (6) a low cost test vehicle for measuring highway skid resistance. Services offered by NASA to facilitate access to its technology are described.

  8. Model For Marketing Strategy Decision Based On Multicriteria Decicion Making: A Case Study In Batik Madura Industry

    Science.gov (United States)

    Anna, I. D.; Cahyadi, I.; Yakin, A.

    2018-01-01

    Selection of marketing strategy is a prominent competitive advantage for small and medium enterprises business development. The selection process is is a multiple criteria decision-making problem, which includes evaluation of various attributes or criteria in a process of strategy formulation. The objective of this paper is to develop a model for the selection of a marketing strategy in Batik Madura industry. The current study proposes an integrated approach based on analytic network process (ANP) and technique for order preference by similarity to ideal solution (TOPSIS) to determine the best strategy for Batik Madura marketing problems. Based on the results of group decision-making technique, this study selected fourteen criteria, including consistency, cost, trend following, customer loyalty, business volume, uniqueness manpower, customer numbers, promotion, branding, bussiness network, outlet location, credibility and the inovation as Batik Madura marketing strategy evaluation criteria. A survey questionnaire developed from literature review was distributed to a sample frame of Batik Madura SMEs in Pamekasan. In the decision procedure step, expert evaluators were asked to establish the decision matrix by comparing the marketing strategy alternatives under each of the individual criteria. Then, considerations obtained from ANP and TOPSIS methods were applied to build the specific criteria constraints and range of the launch strategy in the model. The model in this study demonstrates that, under current business situation, Straight-focus marketing strategy is the best marketing strategy for Batik Madura SMEs in Pamekasan.

  9. Security of radioactive sources in industrial radiography

    International Nuclear Information System (INIS)

    Popp, Andrew; Murray, Allan

    2010-01-01

    This paper describes the need and new requirements to ensure the security of radioactive sources used in the practice of industrial radiography. We describe the discussions and issues arising during the september 2010 regional workshop held in Sydney on the application of security measures to industrial radiography practices. The workshop provided the perspectives of both radiation regulators and industry practitioners, including those from the Philippines. We describe the outputs of the workshop, and how they were developed, and make suggestions for further consideration and applications of security measures in the practice of industrial radiography. (author)

  10. Using game theory to improve safety within chemical industrial parks

    CERN Document Server

    Reniers, Genserik

    2013-01-01

    Though the game-theoretic approach has been vastly studied and utilized in relation to economics of industrial organizations, it has hardly been used to tackle safety management in multi-plant chemical industrial settings. Using Game Theory for Improving Safety within Chemical Industrial Parks presents an in-depth discussion of game-theoretic modelling which may be applied to improve cross-company prevention and -safety management in a chemical industrial park.   By systematically analyzing game-theoretic models and approaches in relation to managing safety in chemical industrial parks, Using Game Theory for Improving Safety within Chemical Industrial Parks explores the ways game theory can predict the outcome of complex strategic investment decision making processes involving several adjacent chemical plants. A number of game-theoretic decision models are discussed to provide strategic tools for decision-making situations.   Offering clear and straightforward explanations of methodologies, Using Game Theor...

  11. Method of making stepped photographic density standards of radiographic photographs

    International Nuclear Information System (INIS)

    Borovin, I.V.; Kondina, M.A.

    1987-01-01

    In industrial radiography practice the need often arises for a prompt evaluation of the photographic density of an x-ray film. A method of making stepped photographic density standards for industrial radiography by contact printing from a negative is described. The method is intended for industrial radiation flaw detection laboratories not having specialized sensitometric equipment

  12. Decision-making on the integration of renewable energy in the mining industry: A case studies analysis, a cost analysis and a SWOT analysis

    Directory of Open Access Journals (Sweden)

    Kateryna Zharan

    2017-01-01

    Full Text Available The mining industry is showing increasing interest in using renewable energy (RE technologies as one of the principles of sustainable mining. This is witnessed in several pilot projects in major mining countries around the world. Positive factors which favor this interest are gaining importance and negative barrier factors seem to be less relevant. For a mine operator, the switch from fossil fuel to RE technologies is the outcome of decision making processes. So far, research about such decision making on the use of RE in mining is underdeveloped. The purpose of this paper to present a practical decision rule based on a principle of indifference between RE and fossil fuel technologies and on appropriate time management. To achieve this objective, three investigations are made: (i a case studies analysis, (ii a comparative cost analysis, and (iii a SWOT analysis.

  13. Tantangan Industri Kreatif-Game Online di Indonesia

    Directory of Open Access Journals (Sweden)

    Choirul Fajri

    2012-07-01

    Full Text Available Information and communication technology currently has grown to such an extent, not only to meet the needs for information only, but now has grown to the fulfillment of the will of entertainment. These developments, and then bring up the creative industries technology-based communication and information, one of them is online gaming. Creative industries in this area, has become a phenomenon by itself, and makes it as one of the important sectors for economic growth. However, based on the data we get, there are still constraints faced in the development of this industry, such as: the limitations of knowledge, capital, the absence of Government support, as well as the lack of adequate infrastructure. The negative impact was unavoidable as well as from the industry, for example, will the existence of addiction for the gamers who have an impact on crime and action elements of pornography are also inherent in this online game. Therefore, it takes the good cooperation between the developers of the game and also the Government to be able to develop the online gaming industry. There is awareness of the game developer to make a quality game play and has educational values.

  14. FEASIBILITY ANALYSIS ON INDUSTRIAL SYMBIOSIS BETWEEN CEMENT INDUSTRY AND TEA INDUSTRY

    Directory of Open Access Journals (Sweden)

    Shailendra Kumar Yadav

    2015-08-01

    Full Text Available The project aims at analyzing the feasibility of utilizing cement kiln dust (CKD in treating wastewater from tea industry with the concept of industrial symbiosis. CKD is the dust collected at the air pollution control device(s associated with a kiln system from cement industry. A very less percent of CKD is recycled and the rest is land filled /stockpiled; disrupts groundwater through leaching of minerals. Cement Kiln Dust (CKD, rich in CaO, SiO2, behaves as a neutralizing as well as stabilizing agent for tea effluent treatment. The ability of CKD to reduce the BOD, COD, TSS, and phosphates in tea effluent was analyzed and the optimum dosage is determined. The effect of different dosages of Cement Kiln Dust ranging from (1-3 gm/l has been discussed on the bench scale tests. The results show that, for different CKD concentrations, high removal efficiencies of 94.4 and 99.0, 58.9 for BOD, TSS, phosphates and a lower efficiency for COD with 9.09 are achieved for 2.5gm/l. The persistent presence of color providing proteins theaflavins (TF and the arubigins (TR from the leftover tea leaves in the effluent imparts the low removal efficiencies of COD. However, the COD value is within the dischargeable limits (CPCB standards. Moreover, a considerable removal efficiency and high SVI of 0.181 makes CKD a feasible coagulant in treating tea effluent with optimum dosage of 2.5g/l. The objective of developing industrial symbiosis network was thus achieved using the CKD to treat wastewater from tea industries.   International Journal of EnvironmentVolume-4, Issue-3, June-August 2015Page: 20-34

  15. The Hydrogen Economy Making the Transition to the Third Industrial Revolution and a New Energy Era

    International Nuclear Information System (INIS)

    Jeremy Rifkin

    2006-01-01

    Jeremy Rifkin is the author of the international best seller, The Hydrogen Economy, which has been translated into fourteen languages. It is the most widely read book in the world on the future of renewable energy and the hydrogen economy. In his presentation on 'The Hydrogen Economy', Mr. Rifkin takes us on an eye-opening journey into the next great commercial era in history. He envisions the dawn of a new economy powered by hydrogen that will fundamentally change the nature of our market, political and social institutions, just as coal and steam power did at the beginning of the industrial age. Rifkin observes that we are fast approaching a critical watershed for the fossil-fuel era, with potentially dire consequences for industrial civilization. Experts had been saying that we had another forty or so years of cheap available crude oil left. Now, however, some of the world's leading petroleum geologists are suggesting that global oil production could peak and begin a steep decline much sooner, as early as the second decade of the 21. century. Non-OPEC oil producing countries are already nearing their peak production, leaving most of the remaining reserves in the politically unstable Middle East. Increasing tensions between Islam and the West are likely to further threaten our access to affordable oil. In desperation, the U.S. and other nations could turn to dirtier fossil-fuels, coal, tar sand, and heavy oil, which will only worsen global warming and imperil the earth's already beleaguered ecosystems. Looming oil shortages make industrial life vulnerable to massive disruptions and possibly even collapse. While the fossil-fuel era is entering its sunset century, a new energy regime is being born that has the potential to remake civilization along radical new lines, according to Rifkin. Hydrogen is the most basic and ubiquitous element in the universe. It is the stuff of the stars and of our sun and, when properly harnessed, it is the 'forever fuel'. It never runs

  16. Pressure ulcer prevention and healing using alternating pressure mattress at home: the PARESTRY project.

    Science.gov (United States)

    Meaume, S; Marty, M

    2015-08-01

    Specialised pressure-relieving supports reduce or relieve the interface pressure between the skin and the support surface. The comparative effectiveness of dynamic support surfaces is debated. The aim of this study is to examine the impact of using an alternating pressure air mattress (APAM) on pressure ulcer (PU) incidence in patients receiving home-based care. A second aim was to determine the level of patient/family satisfaction with comfort and gain the views of the care team that used the APAM. The PARESTRY study was a prospective observational study conducted in patients with a high risk of PUs (Braden score prevention groups consisted of patients with no PU at baseline who were in bed for at least 20 hours a day. Patients at baseline with a category 3 or 4 PU or a category 1 or 2 PU in association with poor general health or end-of-life status were included in the secondary prevention group. All patients were laid on an APAM. The primary end point was the % of patients with a worsening skin condition in the pressure area (heel, sacrum, ischium) at day 90 or at the end of the study. The primary analysis was done on the full analysis set (patients included with at least a second assessment), using the last observation carried forward technique to handle missing data, at day 90. A 95% confidence interval was calculated. Analysis was performed on 92 patients (30 in primary prevention and 62 in secondary prevention). The average time spent in bed was 22.7 (SD 2.7) hours a day and 22.6 (SD 2.2) hours in the primary and secondary prevention groups, respectively. At baseline, in the secondary group, 77% of patients had a sacral PU, 63% a heel PU, 8% an ischial tuberosity PU and 45% a PU in another area, a number of patients having multiple PUs. In the primary prevention group, 63% (19/30) of patients dropped out of the study (5 were hospitalised, 9 died, 5 other causes). In the secondary prevention group, 61% (38/62) dropped out (7 were hospitalised, 23 died, 8

  17. Economic Aspects of the Chemical Industry

    Science.gov (United States)

    Koleske, Joseph V.

    Within the formal disciplines of science at traditional universities, through the years, chemistry has grown to have a unique status because of its close correspondence with an industry and with a branch of engineering—the chemical industry and chemical engineering. There is no biology industry, but aspects of biology have closely related disciplines such as fish raising and other aquaculture, animal cloning and other facets of agriculture, ethical drugs of pharmaceutical manufacture, genomics, water quality and conservation, and the like. Although there is no physics industry, there are power generation, electricity, computers, optics, magnetic media, and electronics that exist as industries. However, in the case of chemistry, there is a named industry. This unusual correspondence no doubt came about because in the chemical industry one makes things from raw materials—chemicals—and the science, manufacture, and use of chemicals grew up together during the past century or so.

  18. Industry 4.0 learning factory didactic design parameters for industrial engineering education in South Africa

    Directory of Open Access Journals (Sweden)

    Sackey, S. M.

    2017-05-01

    Full Text Available To manage the impact of Industry 4.0 on industrial engineering (IE education curriculum requirements, realistic teaching and learning infrastructure such as a learning factory are required. This paper scans the literature to determine Industry 4.0’s principles and interactions with IE and a learning factory, surveys relevant universities by questionnaire to determine its current status and practices, and formulates didactic design parameters for an Industry 4.0 learning factory to support IE education in South Africa, making use of existing models of cyber-physical systems and learning factory morphology. In other results, the technical universities are discovered to be more positively disposed, in general terms, to developing an Industry 4.0 learning factory than are the traditional programmes which, with one exception, prefer computational facilities. Of ten universities that offer IE, only one — a traditional programme — has made significant progress towards creating an Industry 4.0 learning factory.

  19. Cost-effectiveness of pressure-relieving devices for the prevention and treatment of pressure ulcers.

    Science.gov (United States)

    Fleurence, Rachael L

    2005-01-01

    The cost-effectiveness of alternating pressure-relieving devices, mattress replacements, and mattress overlays compared with a standard hospital (high-specification foam mattress) for the prevention and treatment of pressure ulcers in hospital patients in the United Kingdom was investigated. A decision-analytic model was constructed to evaluate different strategies to prevent or treat pressure ulcers. Three scenarios were evaluated: the prevention of pressure ulcers, the treatment of superficial ulcers, and the treatment of severe ulcers. Epidemiological and effectiveness data were obtained from the clinical literature. Expert opinion using a rating scale technique was used to obtain quality of life data. Costs of the devices were obtained from manufacturers, whereas costs of treatment were obtained from the literature. Uncertainty was explored through probabilistic sensitivity analysis. Using 30,000 pounds sterling/QALY (quality-adjusted life year) as the decision-maker's cut off point (the current UK standard), in scenario 1 (prevention), the cost-effective strategy was the mattress overlay at 1, 4, and 12 weeks. In scenarios 2 and 3, the cost-effective strategy was the mattress replacement at 1, 4, and 12 weeks. Standard care was a dominated intervention in all scenarios for values of the decision-maker's ceiling ratio ranging from 5,000 pounds sterling to 100,000 pounds sterling/QALY. However, the probabilistic sensitivity analysis results reflected the high uncertainty surrounding the choice of devices. Current information suggests that alternating pressure mattress overlays may be cost-effective for the prevention of pressure ulcers, whereas alternating pressure mattress replacements appears to be cost-effective for the treatment of superficial and severe pressure ulcers.

  20. Present day problems concerning the energy industry

    International Nuclear Information System (INIS)

    Hecker, G.

    1978-01-01

    Problems of the regional energy supply industry touching directly the energy supply utilities (e.g. territorial reform, power prices) are discussed. In a survey on the overall energy situation in the FRG as seen by energy supply utilities, the following conclusions are drawn: 1) The electricity supply industry is in the favourite position to make the required structural changes by utilizing primary energy for generating electric power. It offers - via electric energy - an effective opportunity for substituting oil. 2) The electricity supply industry alone will be in a position to use nuclear energy during the next few decades. A decision in favour of nuclear energy must not be at disposal to make oneself momentarily politically popular. This indispensable decision results exclusively from our responsibility for the future of our national economy and thus our society. (orig./HP) [de

  1. Cross-cultural comparison of concrete recycling decision-making and implementation in construction industry.

    Science.gov (United States)

    Tam, Vivian W Y; Tam, Leona; Le, Khoa N

    2010-02-01

    Waste management is pressing very hard with alarming signals in construction industry. Concrete waste constituents major proportions of construction and demolition waste of 81% in Australia. To minimize concrete waste generated from construction activities, recycling concrete waste is one of the best methods to conserve the environment. This paper investigates concrete recycling implementation in construction. Japan is a leading country in recycling concrete waste, which has been implementing 98% recycling and using it for structural concrete applications. Hong Kong is developing concrete recycling programs for high-grade applications. Australia is making relatively slow progress in implementing concrete recycling in construction. Therefore, empirical studies in Australia, Hong Kong, and Japan were selected in this paper. A questionnaire survey and structured interviews were conducted. Power spectrum was used for analysis. It was found that "increasing overall business competitiveness and strategic business opportunities" was considered as the major benefit for concrete recycling from Hong Kong and Japanese respondents, while "rising concrete recycling awareness such as selecting suitable resources, techniques and training and compliance with regulations" was considered as the major benefit from Australian respondents. However, "lack of clients' support", "increase in management cost" and "increase in documentation workload, such as working documents, procedures and tools" were the major difficulties encountered from Australian, Hong Kong, and Japanese respondents, respectively. To improve the existing implementation, "inclusion of concrete recycling evaluation in tender appraisal" and "defining clear legal evaluation of concrete recycling" were major recommendations for Australian and Hong Kong, and Japanese respondents, respectively.

  2. Cross-cultural comparison of concrete recycling decision-making and implementation in construction industry

    International Nuclear Information System (INIS)

    Tam, Vivian W.Y.; Tam, Leona; Le, Khoa N.

    2010-01-01

    Waste management is pressing very hard with alarming signals in construction industry. Concrete waste constituents major proportions of construction and demolition waste of 81% in Australia. To minimize concrete waste generated from construction activities, recycling concrete waste is one of the best methods to conserve the environment. This paper investigates concrete recycling implementation in construction. Japan is a leading country in recycling concrete waste, which has been implementing 98% recycling and using it for structural concrete applications. Hong Kong is developing concrete recycling programs for high-grade applications. Australia is making relatively slow progress in implementing concrete recycling in construction. Therefore, empirical studies in Australia, Hong Kong, and Japan were selected in this paper. A questionnaire survey and structured interviews were conducted. Power spectrum was used for analysis. It was found that 'increasing overall business competitiveness and strategic business opportunities' was considered as the major benefit for concrete recycling from Hong Kong and Japanese respondents, while 'rising concrete recycling awareness such as selecting suitable resources, techniques and training and compliance with regulations' was considered as the major benefit from Australian respondents. However, 'lack of clients' support', 'increase in management cost' and 'increase in documentation workload, such as working documents, procedures and tools' were the major difficulties encountered from Australian, Hong Kong, and Japanese respondents, respectively. To improve the existing implementation, 'inclusion of concrete recycling evaluation in tender appraisal' and 'defining clear legal evaluation of concrete recycling' were major recommendations for Australian and Hong Kong, and Japanese respondents, respectively.

  3. Basic principles of industrial radiography

    International Nuclear Information System (INIS)

    Bestbier, P.

    1983-01-01

    X-ray radiography and gamma radiography are used in industrial radiography. X-rays and gamma rays have the ability to penetrate materials and be absorbed by different densities. This characteristic makes them useful tools in industrial and medical radiography. The sources used for the generation of x-rays, gamma rays and radioisotopes are discussed. Films are one of the recording methods of x-radiography. The article also deals with advantages and disadvantages of radiography. Factors governing radiation exposure includes: the type of radiation source, material to be radiographed, distance, film, and the method for development. International specifications are also responsible for strict control over the standard of workmanship in industrial radiography

  4. The impact of technology on the music industry

    OpenAIRE

    Kjærgaard, Niklas Louis; Belowska, Martyna; Campbell, Andreas Dal; Winther, Mark; Wandel-Petersen, Daniel; Eros, David

    2016-01-01

    Technology has changed the world and along with it the music industry. Technology has made it possible for anyone to get an internet connection, which has transformed the music industry by making anything available at any time. Now, media streaming is the new trend, which is altering every aspect of the music industry - especially how we consume music. The streaming services have set the agenda in the music industry, and it is killing physical media. This is shown by various reports, and espe...

  5. Procurement in the Nuclear Industry, Quality, Safety and Decision Making

    International Nuclear Information System (INIS)

    Jakobsson, Marianne; Svenson, Ola; Salo, Ilkka

    2010-03-01

    The major purpose of the present study is partly to map and partly to make an analysis of the decision processes in the procurement routines in the nuclear industry in order to provide a basis for: 1. further development of safety inspections about procurements for Swedish Radiation Safety Authority 2. improvements of safety management in connection with procurement within a nuclear-power plant, 3 improvements of procurement routines in general in a nuclear power plant. The procurement processes at a nuclear power plant were analyzed from a decision theoretic perspective. Key staff at the plant was interviewed and written instructions as well as digitalized processes were used in the analysis. The results illustrate the most important moments during the procurement process with descriptions from interviews and documents. The staff at the nuclear power plant used a multi-attribute utility decision theory MAUT-inspired model in evaluation of alternatives and both compensatory (in which negative aspects can be compensated by positive aspects) and non-compensatory (in which certain 'pass' levels of attributes have to be exceeded for a choice) decision rules were used in the procurement process. Not surprising, nuclear safety was evaluated in a non-compensatory manner following regulatory criteria while costs were evaluated in trade-off compensatory rules, which means that a weakness in one consideration might be compensated by strength in another consideration. Thus, nuclear safety above the regulator's and law requirements are not integrated in a compensatory manner when procurement alternatives are evaluated. The nuclear plant assessed an organization's safety culture at an early stage of the purchasing process. A successful and a less successful procurement case were reported with the lessons learned from them. We find that the existing written instructions for purchase were well elaborated and adequate. There is a lack of personal resources when procurement teams

  6. Determinants of Iran's BilateralIntra-industry Trade in Pharmaceutical Industry.

    Science.gov (United States)

    Aghlmand, Siamak; Rahimi, Bahlol; Farrokh-Eslamlou, Hamidreza; Nabilou, Bahram; Yusefzadeh, Hassan

    2018-01-01

    Among non-oil and in trade arena, drug has always been strategic importance and most government especially industrialized countries pay special attention to its production and trade issues. Thus, having a comprehensive view from economic perspective to this section is essential for suggesting intervention. This was a descriptive-analytical and panel study. In this study, gravity model is used to estimate Iran's bilateral intra-industry trade in pharmaceutical products in the 2001-2012 periods. To illustrate the extent of pharmaceutical's intra-industry trade between Iran and its major trading partners, the explanatory variables of market size, income, factor endowments, distance, cultural contributions, and similarities and also special trade arrangements have been applied. Analysis of factors affecting Iran's bilateral intra-industry trade in pharmaceutical industry showed that the average GDP and cultural similarities had a significant positive impact on Iran's bilateral IIT, while the difference in GDP has a negative and significant effect. Coefficients obtained for the geographical distance and the average ratio of total capital to the labor force is not consistent with theoretical expectations. Special trade arrangements did not have significant impact on the extent of bilateral intra-industry trade between Iran and its trading partners. The knowledge of the intra-industry trade between Iran and its trade partners make integration between the countries. Factors affecting this type of trade pattern underlie its development in trade relationship. Therefore, the findings of this study would be useful in helping to develop and implement policies for the expansion of the pharmaceutical trade.

  7. 75 FR 72944 - Third Party Testing for Certain Children's Products; Mattresses, Mattress Pads, and/or Mattress...

    Science.gov (United States)

    2010-11-29

    ...: Revisions to Terms of Acceptance of Children's Product Certifications Based on Third Party Conformity... under which it will accept certifications for children's products based on third party conformity..., requires that certification be based on testing of sufficient samples of the product, or samples that are...

  8. 75 FR 51020 - Third Party Testing for Certain Children's Products; Mattresses, Mattress Pads, and/or Mattress...

    Science.gov (United States)

    2010-08-18

    ... Standardization (ISO)/International Electrotechnical Commission (IEC) Standard 17025:2005, ``General Requirements... and of the requirements of the ISO/IEC 17025:2005 laboratory accreditation standard is provided in the... body that was ISO/IEC 17025 accredited by an ILAC-MRA member at the time of the test. For firewalled...

  9. European Industry, 1700 - 1870

    NARCIS (Netherlands)

    Broadberry, Stephen; Fremdling, Rainer; Solar, Peter M.

    2008-01-01

    This paper offers an overview of the development of European industry between 1700 and 1870, drawing in particular on the recent literature that has emerged following the formation of the European Historical Economics Society in 1991. The approach thus makes use of economic analysis and quantitative

  10. European Industry, 1700-1870

    NARCIS (Netherlands)

    Broadberry, Stephen; Fremdling, Rainer; Solar, Peter M.

    2008-01-01

    This paper offers an overview of the development of European industry between 1700 and 1870, drawing in particular on the recent literature that has emerged following the formation of the European Historical Economics Society in 1991. The approach thus makes use of economic analysis and quantitative

  11. A Game-Chain-Based Approach for Decision Making

    OpenAIRE

    An, Tingyu; Watanabe, tsunami

    2009-01-01

    Nowadays, with the rapid development of information society, decision-making problems become more and more complicated especially in large scale systems such as infrastructure, environmental and industrial fields, which are usually accompanied by psychological competition between involved parties in a complicated, uncertain and dynamic situation. From a holistic perspective of system, a specific decision-making method which is described as game-chain-based decision making has been proposed in...

  12. A different approach to quantifying fire risks when decision making

    International Nuclear Information System (INIS)

    Hay, Adrian

    1991-01-01

    This article outlines an alternative approach to fire safety design which involves decision making on the basis of risk considerations. The methodology is being developed in conjunction with the nuclear industry but is considered equally applicable to other industrial facilities. (author)

  13. Expanding lysine industry: industrial biomanufacturing of lysine and its derivatives.

    Science.gov (United States)

    Cheng, Jie; Chen, Peng; Song, Andong; Wang, Dan; Wang, Qinhong

    2018-04-13

    L-Lysine is widely used as a nutrition supplement in feed, food, and beverage industries as well as a chemical intermediate. At present, great efforts are made to further decrease the cost of lysine to make it more competitive in the markets. Furthermore, lysine also shows potential as a feedstock to produce other high-value chemicals for active pharmaceutical ingredients, drugs, or materials. In this review, the current biomanufacturing of lysine is first presented. Second, the production of novel derivatives from lysine is discussed. Some chemicals like L-pipecolic acid, cadaverine, and 5-aminovalerate already have been obtained at a lab scale. Others like 6-aminocaproic acid, valerolactam, and caprolactam could be produced through a biological and chemical coupling pathway or be synthesized by a hypothetical pathway. This review demonstrates an active and expansive lysine industry, and these green biomanufacturing strategies could also be applied to enhance the competitiveness of other amino acid industry.

  14. Enabling technologies for industrial energy demand management

    International Nuclear Information System (INIS)

    Dyer, Caroline H.; Hammond, Geoffrey P.; Jones, Craig I.; McKenna, Russell C.

    2008-01-01

    This state-of-science review sets out to provide an indicative assessment of enabling technologies for reducing UK industrial energy demand and carbon emissions to 2050. In the short term, i.e. the period that will rely on current or existing technologies, the road map and priorities are clear. A variety of available technologies will lead to energy demand reduction in industrial processes, boiler operation, compressed air usage, electric motor efficiency, heating and lighting, and ancillary uses such as transport. The prospects for the commercial exploitation of innovative technologies by the middle of the 21st century are more speculative. Emphasis is therefore placed on the range of technology assessment methods that are likely to provide policy makers with a guide to progress in the development of high-temperature processes, improved materials, process integration and intensification, and improved industrial process control and monitoring. Key among the appraisal methods applicable to the energy sector is thermodynamic analysis, making use of energy, exergy and 'exergoeconomic' techniques. Technical and economic barriers will limit the improvement potential to perhaps a 30% cut in industrial energy use, which would make a significant contribution to reducing energy demand and carbon emissions in UK industry. Non-technological drivers for, and barriers to, the take-up of innovative, low-carbon energy technologies for industry are also outlined

  15. Protection of the German coal industry

    Energy Technology Data Exchange (ETDEWEB)

    Jones, S; Savage, E

    1989-06-01

    Within Germany, subsidies to the domestic coal industry are raising taxes, increasing electricity prices, constraining industry competitiveness and causing distortions to resource allocation decisions. Coal assistance policies raise the costs of German industry, particularly those which use coal and electricity. In the case of assistance to steaming coal production, subsidies are less explicit, making the direct cost of continued support to the industry less obvious. If Germany deregulated its coal industry, it would become a major coal importer, conceivably importing as much as 60 Mt a year. Such an increase in import demand would raise world coal trade volume significantly. The impact of liberalisation on world coal prices would depend on the extent and timing of liberalisation and the responsiveness of suppliers to the increased import demand. 13 refs., 5 figs., 2 tabs.

  16. Status of the lead/acid battery industry in Malaysia

    Science.gov (United States)

    Wong, J.

    The Malaysian automotive battery industry has an over-capacity and is experiencing a highly competitive situation in the domestic market. In the medium term, therefore, the industry will concentrate on making advances in battery design and technology, and on improving productivity. The manufacture of industrial batteries is similarly under pressure, particularly from foreign products. At present, it is not feasible to produce locally all the various types of industrial batteries required by the home market.

  17. Balancing regional industrial development: analysis on regional disparity of China's industrial emissions and policy implications

    DEFF Research Database (Denmark)

    Liang, Hanwei; Dong, Liang; Luo, Xiao

    2016-01-01

    Efficient industrial emissions mitigation strategy is critical for China's national action on climate change and sustainable development, considering its rapid industrialization. Regional disparity brings difficulties and uncertainties to policy implementation in China. Therefore, an investigation...... development, and highlight not only disparity, but also inequity exists. It is concluded that, there is a larger unequal distribution of GDP per unit of air pollutants and CO2 emission between eastern and western regions, reveals that less developed western and central regions suffer from the emission leakage...... on the regional features of industrial emissions is critical to better decision makings. While to date, related studies have been rather few. This paper applies a spatial analysis on regional features of China's industrial emissions (SO2, NOx and PM2.5 and CO2 emission) in 31 provinces. Spatial autocorrelation...

  18. Environmental performance of straw-based pulp making: A life cycle perspective.

    Science.gov (United States)

    Sun, Mingxing; Wang, Yutao; Shi, Lei

    2018-03-01

    Agricultural straw-based pulp making plays a vital role in pulp and paper industry, especially in forest deficient countries such as China. However, the environmental performance of straw-based pulp has scarcely been studied. A life cycle assessment on wheat straw-based pulp making in China was conducted to fill of the gaps in comprehensive environmental assessments of agricultural straw-based pulp making. On average, the global warming potential (GWP), GWP excluding biogenic carbon, acidification potential and eutrophication potential of wheat straw based pulp making are 2299kg CO 2 -eq, 4550kg CO 2 -eq, 16.43kg SO 2 -eq and 2.56kg Phosphate-eq respectively. The dominant factors contributing to environmental impacts are coal consumption, electricity consumption, and chemical (NaOH, ClO 2 ) input. Chemical input decrease and energy recovery increase reduce the total environmental impacts dramatically. Compared with wood-based and recycled pulp making, wheat straw-based pulp making has higher environmental impacts, which are mainly due to higher energy and chemical requirements. However, the environmental impacts of wheat straw-based pulp making are lower than hemp and flax based pulp making from previous studies. It is also noteworthy that biogenic carbon emission is significant in bio industries. If carbon sequestration is taken into account in pulp making industry, wheat straw-based pulp making is a net emitter rather than a net absorber of carbon dioxide. Since wheat straw-based pulp making provides an alternative for agricultural residue management, its evaluation framework should be expanded to further reveal its environmental benefits. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. A bacteriological study of hospital beds before and after disinfection with phenolic disinfectant

    Directory of Open Access Journals (Sweden)

    Andrade Denise de

    2000-01-01

    Full Text Available In hospitals, one of the ways to control microbial contamination is by disinfecting the furniture used by patients. This study's main objective was to evaluate the microbiological condition of hospital mattresses before and after such disinfection, in order to identify bacteria that are epidemiologically important in nosocomial infection, such as Staphylococcus aureus and Pseudomonas aeruginosa. RODAC plates with two different culture media were used to collect specimens. Patient beds were selected according to previously established criteria, and surface areas on the mattresses were chosen at random. From the total of 1 040 plate cultures from 52 mattresses, positive results were obtained from 500 of them (48.1%, 263 before disinfection and 237 after disinfection. Considering the selectivity of the culture media, the positivity rate was high. There were high prevalences of S. aureus both before and after mattress disinfection. The study results suggest that the usual disinfection procedures, instead of diminishing the number of microbes, merely displace them from one part of the mattress to another, and the number of microorganisms remains the same.

  20. A bacteriological study of hospital beds before and after disinfection with phenolic disinfectant

    Directory of Open Access Journals (Sweden)

    Denise de Andrade

    2000-03-01

    Full Text Available In hospitals, one of the ways to control microbial contamination is by disinfecting the furniture used by patients. This study's main objective was to evaluate the microbiological condition of hospital mattresses before and after such disinfection, in order to identify bacteria that are epidemiologically important in nosocomial infection, such as Staphylococcus aureus and Pseudomonas aeruginosa. RODAC plates with two different culture media were used to collect specimens. Patient beds were selected according to previously established criteria, and surface areas on the mattresses were chosen at random. From the total of 1 040 plate cultures from 52 mattresses, positive results were obtained from 500 of them (48.1%, 263 before disinfection and 237 after disinfection. Considering the selectivity of the culture media, the positivity rate was high. There were high prevalences of S. aureus both before and after mattress disinfection. The study results suggest that the usual disinfection procedures, instead of diminishing the number of microbes, merely displace them from one part of the mattress to another, and the number of microorganisms remains the same.

  1. Evaluation of module industrial usage possibility on the making of renography using serial port

    International Nuclear Information System (INIS)

    Santoso, Wiranto Budi

    2003-01-01

    The possibilities of using industrial modules on renography with serial port have been investigated. Industrial modules from Advantech company (ADAM 4000 series) have been chosen to be evaluated since they are cheapest among other industrial modules. The Adam 4080 counter modules is used as the pulse counters. This module has two counters so that the counters can be used to count the pulse from two renography detectors separately. Two Adam 4050 digital output modules are used to set the energy window of the Single Channel Analyzer. One module is used to set the energy level while the other one is used to set the delta energy. The investigation is conducted under Windows 98 operating system. For energy window setting the result is good. While for pulse counting, the result of counting depend on other activities working on the windows operating system

  2. Making sense of employer collectivism

    DEFF Research Database (Denmark)

    Ibsen, Christian Lyhne

    2016-01-01

    This conceptual article argues that preferences of employers for collective action cannot be reduced to rational actors making decisions based on market structures or institutional logics. Both markets and institutions are inherently ambiguous and employers therefore have to settle for plausible...... – rather than accurate – rational strategies among many alternatives through so-called sensemaking. Sensemaking refers to the process by which employers continuously make sense of their competitive environment by building causal stories of competitive advantages. The article therefore tries to provide......, unlike countries in similar situations, for example Finland and Sweden, Danish employers retained a coordinated industry-level bargaining system, which makes it an interesting paradox to study from the vantage point of sensemaking....

  3. Industry sponsorship and research outcome

    DEFF Research Database (Denmark)

    Lundh, Andreas; Sismondo, Sergio; Lexchin, Joel

    2012-01-01

    Clinical research affecting how doctors practice medicine is increasingly sponsored by companies that make drugs and medical devices. Previous systematic reviews have found that pharmaceutical industry sponsored studies are more often favorable to the sponsor's product compared with studies...

  4. Automação industrial e sistemas informatizados de gestão da produção em fundições de mercado Industrial automation and computerized production management systems in make-to-order foundries

    Directory of Open Access Journals (Sweden)

    Flavio Cesar F. Fernandes

    2002-12-01

    Full Text Available Fundição é um processo de fabricação que vem crescendo em importância. O principal objetivo deste artigo é analisar, em termos de automação e sistemas informatizados de gestão da produção (SIGP, as fundições de mercado (fundições que produzem sob encomenda um grande número de pedidos vindos, em geral, de um grande número de clientes no interior do Estado de São Paulo pertencentes aos 5 principais pólos (Piracicaba, Indaiatuba, Limeira, São Carlos e Itu com 10 a 250 trabalhadores. Das 61 empresas do interior de São Paulo, 35 situam-se nesses 5 pólos (ou em suas imediações; entrevistamos pessoalmente os diretores industriais e visitamos o chão de fábrica de 30 fundições dentre essas 35. Analisamos quase 200 tabelas de freqüência e de contingência e extraímos várias conclusões, por exemplo: (i entre os três principais problemas e necessidades relativos à produção, dois deles estão diretamente relacionados com a automação industrial e com os SIGP; (ii são coincidentes os interesses em automação e SIGP.Foundry is a manufacturing process with a growing importance. The main objective of this paper is to analyze, in terms of automation and of computerized production management systems (CPMS, the make-to-order foundry in the interior of the state of São Paulo belonging to 5 main foundry industrial districts (Piracicaba, Indaiatuba, Limeira, São Carlos and Itu with 10 to 250 workers. From the 61 enterprises in the interior of São Paulo State, 35 are situated in these 5 industrial districts (or in their neighborhood; we interviewed personally the industrial executive officer and visited the shop-floor of 30 among this 35 foundries. We have analyzed almost 200 frequency and contingency tables and draw several conclusions, for example: (i among the three main problems and necessities related with production, two of them are directly related with automation and CPMS; (ii automation and CPMS generate coincident

  5. [Thinking on development of Shanxi Astragali Radix industry].

    Science.gov (United States)

    Qin, Xue-Mei; Li, Ai-Ping; Li, Ke; Li, An-Ping; Ning, Lu-Hong

    2016-12-01

    Shanxi, a traditional production area to produce genuine Astragali Radix of high quality, has experienced major changes in the pattern of resources. This area once accounted for half of Astragali Radix industry, but now only serves as the largest supply area of traditional wild Astragali Radix. Furthermore, the strategic position of Shanxi Astragali Radix industry will become more prominent and more important to economic and social development in face of the diversity of market demands, especially for the strong demands of high-end Astragali Radix. In addition, Astragalus industry involves the simultaneous development of the first, second and tertiary industries in many areas, and it is typical and representative in the traditional Chinese medicine industry development. However, the application and industrial development of Shanxi Astragali Radix have been restricted due to the problems such as blind promotion of transplanting cultivation technology, and lack of science and technology including efficacy investigation, safety evaluation, standardization and controllability studies. Therefore, we would analyze the production history, resource structure, the current situation and progress of industry development, scientific research foundation and existing problem in this paper, and put forward countermeasures for development and technical innovation in order to make Astragali Radix industry bigger and stronger through innovation-driven and make benefits for demos. This thought provides a reference for the exploratory development of other large varieties of Chinese medicinal materials. Copyright© by the Chinese Pharmaceutical Association.

  6. Making working in retailing interesting

    DEFF Research Database (Denmark)

    Esbjerg, Lars; Buck, Nuka; Grunert, Klaus G.

    2010-01-01

    This paper is about how five retail chains in the Danish grocery industry attempt to make low-wage, low-status store-level retail jobs as checkout operators and sales assistants interesting from the perspective of both retailers and employees. Following analysis of the social and institutional...... and make store-level retail jobs interesting to them. Although retailers mainly focus their attention on career seekers, we find that working in retailing is interesting for all employee types because the retailers are currently able to meet their respective motivations and aspirations. Nevertheless, we...

  7. Review of tribological sinks in six major industries

    Energy Technology Data Exchange (ETDEWEB)

    Imhoff, C.H.; Brown, D.R.; Hane, G.J.; Hutchinson, R.A.; Erickson, R.; Merriman, T.; Gruber, T.; Barber, S.

    1985-09-01

    Friction and material wear occur throughout all industries and are involved in many processes within each industry. These conditions make assessing tribological activity overall in industry very complex and expensive. Therefore, a research strategy to obtain preliminary information on only the most significant industrial tribological sinks was defined. The industries examined were selected according to both the magnitude of overall energy consumption (particularly machine drive) and the known presence of significant tribological sinks. The six industries chosen are as follows: mining, agriculture, primary metals, chemicals/refining, food, and pulp and paper. They were reviewed to identify and characterize the major tribology sinks. It was concluded that wear losses are greater than friction losses, and that reducing wear rates would improve industrial productivity.

  8. Methodology for evaluation of industrial CHP production

    International Nuclear Information System (INIS)

    Pavlovic, Nenad V.; Studovic, Milovan

    2000-01-01

    At the end of the century industry switched from exclusive power consumer into power consumer-producer which is one of the players on the deregulated power market. Consequently, goals of industrial plant optimization have to be changed, making new challenges that industrial management has to be faced with. In the paper is reviewed own methodology for evaluation of industrial power production on deregulated power market. The methodology recognizes economic efficiency of industrial CHP facilities as a main criterion for evaluation. Energy and ecological efficiency are used as additional criteria, in which implicit could be found social goals. Also, methodology recognizes key and limit factors for CHP production in industry. It could be successful applied, by use of available commercial software for energy simulation in CHP plants and economic evaluation. (Authors)

  9. Industrial Assessment of Creative Persons and Work Environments.

    Science.gov (United States)

    Lifton, Peter D.

    While personality psychology has a definite contribution to make to the study of industrial psychology and organizational behavior, it is a contribution with parameters, limitations, and areas of expertise which need to be better defined. Many industrial/organizational (I/O) psychologists are skeptical of the utility of personality measures for…

  10. Priming and Organizational Level Effects on Ethical Decision Making.

    Science.gov (United States)

    Lautenschlager, Gary; Morris, Debbie

    The study of ethical decision making has gained considerable interest among organizational scientists due to the widespread occurrence of wrongdoing in business, industry, government and various other institutions. This study examined the effects of priming and organizational level manipulation on an individual's ethical decision-making behavior.…

  11. Industrial use of coal and clean coal technology

    Energy Technology Data Exchange (ETDEWEB)

    Leibson, I; Plante, J J.M.

    1990-06-01

    This report builds upon two reports published in 1988, namely {ital The use of Coal in the Industrial, Commercial, Residential and Transportation Sectors} and {ital Innovative Clean Coal Technology Deployment}, and provides more specific recommendations pertaining to coal use in the US industrial sector. The first chapter addresses industrial boilers which are common to many industrial users. The subsequent nine chapters cover the following: coke, iron and steel industries; aluminium and other metals; glass, brick, ceramic, and gypsum industries; cement and lime industries; pulp and paper industry; food and kindred products; durable goods industry; textile industry; refining and chemical industry. In addition, appendices supporting the contents of the study are provided. Each chapter covers the following topics as applicable: energy overview of the industry sector being discussed; basic processes; foreign experience; impediments to coal use; incentives that could make coal a fuel of choice; current and projected use of clean coal technology; identification of coal technology needs; conclusions; recommendations.

  12. Industry Software Trustworthiness Criterion Research Based on Business Trustworthiness

    Science.gov (United States)

    Zhang, Jin; Liu, Jun-fei; Jiao, Hai-xing; Shen, Yi; Liu, Shu-yuan

    To industry software Trustworthiness problem, an idea aiming to business to construct industry software trustworthiness criterion is proposed. Based on the triangle model of "trustworthy grade definition-trustworthy evidence model-trustworthy evaluating", the idea of business trustworthiness is incarnated from different aspects of trustworthy triangle model for special industry software, power producing management system (PPMS). Business trustworthiness is the center in the constructed industry trustworthy software criterion. Fusing the international standard and industry rules, the constructed trustworthy criterion strengthens the maneuverability and reliability. Quantitive evaluating method makes the evaluating results be intuitionistic and comparable.

  13. Reassessing policy paradigms: A comparison of the global tobacco and alcohol industries.

    Science.gov (United States)

    Hawkins, Benjamin; Holden, Chris; Eckhardt, Jappe; Lee, Kelley

    2018-01-01

    Tobacco is widely considered to be a uniquely harmful product for human health. Since the mid-1990s, the strategies of transnational tobacco corporations to undermine effective tobacco control policy has been extensively documented through internal industry documents. Consequently, the sale, use and marketing of tobacco products are subject to extensive regulation and formal measures to exclude the industry from policy-making have been adopted in the Framework Convention on Tobacco Control. In contrast to tobacco, alcohol is subject to less stringent forms of regulation, and the alcohol industry continues to play a central role in policy-making in many countries and at the global level. This article examines whether there is a sufficient rationale for such different regulatory approaches, through a comparative analysis of the political economy of the tobacco and alcohol industries including the structure of the industries, and the market and political strategies they pursue. Despite some important differences, the extensive similarities which exist between the tobacco and alcohol industries in terms of market structure and strategy, and political strategy, call into question the rationale for both the relatively weak regulatory approach taken towards alcohol, and the continued participation of alcohol corporations in policy-making processes.

  14. The Hydrogen Economy Making the Transition to the Third Industrial Revolution and a New Energy Era

    Energy Technology Data Exchange (ETDEWEB)

    Jeremy Rifkin

    2006-07-01

    Jeremy Rifkin is the author of the international best seller, The Hydrogen Economy, which has been translated into fourteen languages. It is the most widely read book in the world on the future of renewable energy and the hydrogen economy. In his presentation on 'The Hydrogen Economy', Mr. Rifkin takes us on an eye-opening journey into the next great commercial era in history. He envisions the dawn of a new economy powered by hydrogen that will fundamentally change the nature of our market, political and social institutions, just as coal and steam power did at the beginning of the industrial age. Rifkin observes that we are fast approaching a critical watershed for the fossil-fuel era, with potentially dire consequences for industrial civilization. Experts had been saying that we had another forty or so years of cheap available crude oil left. Now, however, some of the world's leading petroleum geologists are suggesting that global oil production could peak and begin a steep decline much sooner, as early as the second decade of the 21. century. Non-OPEC oil producing countries are already nearing their peak production, leaving most of the remaining reserves in the politically unstable Middle East. Increasing tensions between Islam and the West are likely to further threaten our access to affordable oil. In desperation, the U.S. and other nations could turn to dirtier fossil-fuels, coal, tar sand, and heavy oil, which will only worsen global warming and imperil the earth's already beleaguered ecosystems. Looming oil shortages make industrial life vulnerable to massive disruptions and possibly even collapse. While the fossil-fuel era is entering its sunset century, a new energy regime is being born that has the potential to remake civilization along radical new lines, according to Rifkin. Hydrogen is the most basic and ubiquitous element in the universe. It is the stuff of the stars and of our sun and, when properly harnessed, it is the &apos

  15. Atoms in industry: Radiation technology supports development [Foreword

    International Nuclear Information System (INIS)

    Amano, Yukiya

    2015-01-01

    Cutting-edge industrial technologies underpin the success of strong economies, in developed and developing countries alike. Nuclear science and technology, in particular, can make a major contribution to economic growth and competitiveness, and have an important role to play in support of sustainable development. The IAEA helps to make nuclear science and technology available to enable countries to pursue wider development objectives in areas including human health, agriculture, natural resource management and environmental protection. This edition of the IAEA Bulletin highlights some of the ways in which the technology is being put to effective use in industry.

  16. Determinants of Iran’s Bilateral Intra-industry Trade in Pharmaceutical Industry

    Science.gov (United States)

    Aghlmand, Siamak; Rahimi, Bahlol; Farrokh-Eslamlou, Hamidreza; Nabilou, Bahram; Yusefzadeh, Hassan

    2018-01-01

    Among non-oil and in trade arena, drug has always been strategic importance and most government especially industrialized countries pay special attention to its production and trade issues. Thus, having a comprehensive view from economic perspective to this section is essential for suggesting intervention. This was a descriptive-analytical and panel study. In this study, gravity model is used to estimate Iran’s bilateral intra-industry trade in pharmaceutical products in the 2001-2012 periods. To illustrate the extent of pharmaceutical’s intra-industry trade between Iran and its major trading partners, the explanatory variables of market size, income, factor endowments, distance, cultural contributions, and similarities and also special trade arrangements have been applied. Analysis of factors affecting Iran’s bilateral intra-industry trade in pharmaceutical industry showed that the average GDP and cultural similarities had a significant positive impact on Iran’s bilateral IIT, while the difference in GDP has a negative and significant effect. Coefficients obtained for the geographical distance and the average ratio of total capital to the labor force is not consistent with theoretical expectations. Special trade arrangements did not have significant impact on the extent of bilateral intra-industry trade between Iran and its trading partners. The knowledge of the intra-industry trade between Iran and its trade partners make integration between the countries. Factors affecting this type of trade pattern underlie its development in trade relationship. Therefore, the findings of this study would be useful in helping to develop and implement policies for the expansion of the pharmaceutical trade. PMID:29881438

  17. Key Directions of Sectoral and Spatial Changes in the Russian Industry

    Directory of Open Access Journals (Sweden)

    Chasovsky Vladimir

    2015-09-01

    Full Text Available This article considers major trends in the spatial and sectoral structure of national production and analyses the patterns of transformation of industrial systems into integrated industrial complexes, which show higher efficiency in transit condiétions. The author presents a new approach to studying the structural transformation of industrial systems during the transition of the national economy, which will make it possible to identify major trends in national production. The article seeks to draw attention to the methodology of developing and implementing industrial policy and devising an algorithm of effective transition of Russian industries in the modern conditions of international division of labor. The modernization and transnationalization of national production rests on a number of methods that make it possible for the corporate management to react rapidly to changes in the global market situation. These methods include strategic segmentation, analyzing the ability to adapt to the expected conditions, devising a company’s entrepreneurial strategy, and changes in the spatial and industrial structure of production. The transformation of national industry is associated with the introduction of mechanisms of industrial integration structures using single organizational production modules capable of rational combination and transformation of the elements of national production structure to create competitive transnational production associations, such as clusters and other production forms serving as ‘growth poles’ and becoming elements of the emerging framework for national production. This methodology makes it possible to develop new approaches, methods, and principles for analyzing the transformation of the national spatial and industrial system during economic transition. Current factors, features, patterns and trends in the transformation of national industrial systems are identified; a mechanism for devising and implementing a

  18. What makes Napa Napa? The roots of success in the wine industry

    Directory of Open Access Journals (Sweden)

    Anil Hira

    2014-06-01

    Full Text Available California is world-renowned for the ability to produce world class quality wine. At the center of this achievement is the development of Napa as a premier wine producing region. We examine the sources of Napa’s success by testing factors from leading industrial location theories against statistical and qualitative evidence. Using an unusual database of county-wide data on the wine industry to compare Napa’s success with other wine-producing regions of California, we can control for different historical factors and economic conditions that temper most comparative wine studies. Many regions in California can produce world class wine, but none enjoy the same level of returns as Napa. Path dependency and distance to markets are poor explanations for the relative success of wine regions. We find that while terroir, or natural comparative advantage, has some evidence behind it, social capital and entrepreneurship behind technological leadership are central to Napa’s competitive advantage.

  19. Holland at CERN – Industrial exhibition

    CERN Multimedia

    GS Department

    2010-01-01

    Sponsored by EVD, an agency of the Dutch Ministry of the Economy From 8 to 11 November 2010 Industrial Exhibition Administration Building Bldg. 61 9-00 - 17-30 Twenty seven companies will present their latest technology at the industrial exhibition "Holland at CERN". Dutch industry will exhibit products and technologies which are related to the field of particle physics. Individual interviews will take place directly at the stands in the Main Building. The firms will contact relevant users/technicians but any user wishing to make contact with a particular firm is welcome to use the contact details which are available from each departmental secretariat or at the following URL: http://gs-dep.web.cern.ch/gs-dep/groups/sem/ls/Industrial_Exhibitions.htm#Industrial_exhibitions You will find the list of exhibitors below. LIST OF EXHIBITORS: Schelde Exotech Vernooy BV Triumph Group INCAA Computers DeMaCo Holland bv TNO Science & Industry Janssen Precision Engi...

  20. Industry and chain responsibilities and integrative social contract theory

    NARCIS (Netherlands)

    Wempe, J.F.D.B. (Johan)

    2010-01-01

    This article shows that business ethics is not capable of explaining the responsibility of limited organized collectives such as chains, sectors and industries. The responsibility of the pharmaceutical industry to make AIDSblockers available for patients in Africa is an example of such a sector

  1. An interdisciplinary perspective on industrial energy efficiency

    International Nuclear Information System (INIS)

    Palm, Jenny; Thollander, Patrik

    2010-01-01

    This paper combines engineering and social science approaches to enhance our understanding of industrial energy efficiency and broaden our perspective on policy making in Europe. Sustainable development demands new strategies, solutions, and policy-making approaches. Numerous studies of energy efficiency potential state that cost-effective energy efficiency technologies in industry are not always implemented for various reasons, such as lack of information, procedural impediments, and routines not favoring energy efficiency. Another reason for the efficiency gap is the existence of particular values, unsupportive of energy efficiency, in the dominant networks of a branch of trade. Analysis indicates that different sectors of rather closed communities have established their own tacit knowledge, perceived truths, and routines concerning energy efficiency measures. Actors in different industrial sectors highlight different barriers to energy efficiency and why cost-effective energy efficiency measures are not being implemented. The identified barriers can be problematized in relation to the social context to understand their existence and how to resolve them.

  2. Quantitative and qualitative investigation of industrial solid waste in industrial plants located between Tehran and Karaj

    Directory of Open Access Journals (Sweden)

    M.R. Gohari

    2011-07-01

    Full Text Available Background and aims   Rapid population growth, industrial development, urbanization culture propagation and excessive material consumption are the most important factor which caused over increasing of municipal, industrial and agricultural waste in human society. Inappropriate disposal of generated waste in recent years created several environmental menace and crisis in human society.   methods   For investigation about existent situation of industrial waste generation questionnaire had been used. This questionnaire was catered by Iran environmental protection organization. Aforementioned questionnaire contained 45 questions about combination, quality and quantity of industrial waste. Total number of more than 50 personnel industry was 287 . But sample contained 50 randomly selected industries. Gathered data have been analyzed with spss 18.   Results  Total generated industrial waste was 123451KG per day which had volume equal to 781 cubic meters per day. Generated waste capitation per every worker was 5.8 KG. Maximum frequency of industrial was related to machinery and equipment group which maximum generated waste was related to this industrial group too. Maximum hazardous waste was for inflammable waste with 34 weight percent. Major hazardous waste generating industrial was chemical and plastic making industry.   Conclusion  yielded result from this investigation has shown that significant relation existed between waste production rate and personnel number. The more personnel are, the more waste production increase.

  3. How Data Will Transform Industrial Processes: Crowdsensing, Crowdsourcing and Big Data as Pillars of Industry 4.0

    Directory of Open Access Journals (Sweden)

    Virginia Pilloni

    2018-03-01

    Full Text Available We are living in the era of the fourth industrial revolution, namely Industry 4.0. This paper presents the main aspects related to Industry 4.0, the technologies that will enable this revolution, and the main application domains that will be affected by it. The effects that the introduction of Internet of Things (IoT, Cyber-Physical Systems (CPS, crowdsensing, crowdsourcing, cloud computing and big data will have on industrial processes will be discussed. The main objectives will be represented by improvements in: production efficiency, quality and cost-effectiveness; workplace health and safety, as well as quality of working conditions; products’ quality and availability, according to mass customisation requirements. The paper will further discuss the common denominator of these enhancements, i.e., data collection and analysis. As data and information will be crucial for Industry 4.0, crowdsensing and crowdsourcing will introduce new advantages and challenges, which will make most of the industrial processes easier with respect to traditional technologies.

  4. Trends in finding and development costs, their effect on financial markets and the difference technological innovation can make in the petroleum industry

    International Nuclear Information System (INIS)

    Haessel, W.; Robertson, D.C.

    1997-01-01

    The need for the Canadian oil and gas industry to minimize finding and development costs was discussed. Finding and development costs include total exploration and development expenditures divided by new reserves discovered, plus extensions, plus revisions. Controlling these costs is important to creating shareholder value. Based on reserves and expenditures data from the Canadian Association of Petroleum Producers Statistical Handbook, Alberta finding and development costs were above $10/boe (barrel of oil equivalent) in four out of eight years between 1989 and 1996, and averaged $9.35/boe for the period. On the other hand, Alberta operating costs have declined from $7.68/boe in 1989 to less than $6.00/boe in 1995 and 1996. The lesson is clear: in order for a company to make a profit it must be able to beat the average. The relationship between finding and development costs and mergers and acquisitions was explained. (High finding and development costs tend to depress share prices and tend to make companies takeover targets). 9 figs

  5. Identification of factors affecting individual industries

    Directory of Open Access Journals (Sweden)

    Maryam Sadat Mirzadeh

    2017-10-01

    Full Text Available High knowledge and technology are rapidly becoming a competitive advantage in today’s world. Individual industries are considered one of the key sectors in the country’s industry. Ranking the factors that affect these industries makes us more familiar with their effectiveness and helps us take actions to improve such factors in knowledge-based companies. Consequently, based on previous research studies on Individual Industries, field observations, and a questionnaire prepared by the researchers, the current study explores and classifies the factors affecting the establishment of these industries. Regarding its purpose, this is an applied research, and regarding data collection, it is a descriptive survey. Using purposive sampling, 60 questionnaires were collected and effective factors were classified applying the SPSS software and the TOPSIS technique. This study suggests that content factors are ranked first place, while contextual and structural factors are ranked second and third, respectively. Therefore, executives and managers in single industries are recommended to strengthen joint enterprise norms and dominant values and beliefs in knowledge-based companies in order to help the growth and development of single industries.

  6. Dollar Summary of Prime Contract Awards by State, Place, and Contractor, FY84, Part 2 (Air Force Academy, Colorado-Zion, Illinois).

    Science.gov (United States)

    1984-01-01

    HETRA CORPORATION 131 131 MARTIN MARIETTA CORPORATION 3,478 3,478 NEWPORT ELECTRO - OPTICS 36 36 OPTO MECHANIK INC 2,293 2,293 REGAL MATTRESS COMPANY INC...TELEPHONE & TELO CO 584 58 RIVIERA BEACH BIG THREE INDUSTRIES INC 628 626 KOEHLKE COMPONENTS INC 85 85 LENZAR OPTICS CORP 966 966 MICRO TOOL a ENGINEERING...LOCATION CONTRACTOR DOD AIR NAME NAME TOTAL ARMY NAVY FORCE DLA OCE AURORA ELECTRO -TEST INC 95 95 ELLIS THEODORE AND COMPANY 82 82 FAMILY MOTEL 27 27

  7. Considerations about the licensing process of special nuclear industrial facilities

    Energy Technology Data Exchange (ETDEWEB)

    Talarico, M.A., E-mail: talaricomarco@hotmail.com [Marinha do Brasil, Rio de Janeiro, RJ (Brazil). Coordenacao do Porgrama de Submarino com Propulsao Nuclear; Melo, P.F. Frutuoso e [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear

    2015-07-01

    This paper brings a discussion about the challenges involved in the development of a new kind of nuclear facility in Brazil, a naval base for nuclear submarines, with attention to the licensing process and considerations about the risk-informed decision making application to the licensing process. Initially, a model of such a naval base, called in this work, special industrial facility, is proposed, with its systems and respective sets of basic requirements, in order to make it possible the accomplishment of the special industrial facility support function to the nuclear submarine. A discussion about current challenges to overcome in this project is presented: the challenges due to the new characteristics of this type of nuclear facility; existence of several interfaces between the special industrial facilities systems and nuclear submarine systems in design activities; lack of specific regulation in Brazil to allow the licensing process of special industrial facilities by the nuclear safety authority; and comments about the lack of information from reference nuclear facilities, as is the case with nuclear power reactors (for example, the German Grafenrheinfeld nuclear plant is the reference plant for the Brazilian Angra 2 nuclear plant). Finally, in view of these challenges, an analysis method of special industrial facility operational scenarios to assist the licensing process is proposed. Also, considerations about the application of risk-informed decision making to the special industrial facility activity and licensing process in Brazil are presented. (author)

  8. Considerations about the licensing process of special nuclear industrial facilities

    International Nuclear Information System (INIS)

    Talarico, M.A.; Melo, P.F. Frutuoso e

    2015-01-01

    This paper brings a discussion about the challenges involved in the development of a new kind of nuclear facility in Brazil, a naval base for nuclear submarines, with attention to the licensing process and considerations about the risk-informed decision making application to the licensing process. Initially, a model of such a naval base, called in this work, special industrial facility, is proposed, with its systems and respective sets of basic requirements, in order to make it possible the accomplishment of the special industrial facility support function to the nuclear submarine. A discussion about current challenges to overcome in this project is presented: the challenges due to the new characteristics of this type of nuclear facility; existence of several interfaces between the special industrial facilities systems and nuclear submarine systems in design activities; lack of specific regulation in Brazil to allow the licensing process of special industrial facilities by the nuclear safety authority; and comments about the lack of information from reference nuclear facilities, as is the case with nuclear power reactors (for example, the German Grafenrheinfeld nuclear plant is the reference plant for the Brazilian Angra 2 nuclear plant). Finally, in view of these challenges, an analysis method of special industrial facility operational scenarios to assist the licensing process is proposed. Also, considerations about the application of risk-informed decision making to the special industrial facility activity and licensing process in Brazil are presented. (author)

  9. Possibilities in concrete industry towards circular economy through industrial symbiosis

    Directory of Open Access Journals (Sweden)

    Bjegović Dubravka

    2014-01-01

    Full Text Available Major challenges of traditional linear concrete industry are utilisation of large amount of non-renewable resources and significant air emissions during production, utilisation and demolition of concrete structures. At the same time, concrete industry has a high potential for a positive shift towards more sustainable production and lower ecological footprint. One of the strategies is to use waste materials and byproducts from other industries as valuable raw materials in concrete industry. This loop can be closed only by taking into account properties of a certain waste material and using them for preparation of special purpose concrete products, in which these properties are favourable. Other strategy is designing concrete tailored for certain environment and service life, making it optimised for that specific purpose. The paper presents some of the available waste and recycled materials in Croatia and research focused on their potential application in civil engineering. The possibilities of utilisation are first explored in laboratory conditions, with the results presented in this paper as an outcome. Based on the obtained results some of the potential areas of application are proposed, in which concrete prepared with these waste materials becomes alternative to classical concrete. Both original scientific research results are presented, but also prototype of products produced based on the scientific research.

  10. Welsh Women's Industrial Fiction 1880-1910.

    Science.gov (United States)

    Bohata, Kirsti; Jones, Alexandra

    2017-10-02

    From the beginning of the genre, women writers have made a major contribution to the development of industrial writing. Although prevented from gaining first-hand experience of the coalface, Welsh women writers were amongst the first to try to fictionalize those heavy industries-coal and metal in the south, and slate in the north-which dominated the lives of the majority of the late nineteenth-century Welsh population. Treatment of industrial matter is generally fragmentary in this early women's writing; industrial imagery and metaphor may be used in novels that are not primarily "about" industry at all. Yet from c. 1880-1910, Welsh women writers made a significant-and hitherto critically neglected-attempt to make sense in literature of contemporary industrial Wales in powerful and innovative ways. This essay maps their contribution and considers anglophone Welsh women writers' adaptations and innovations of form (particularly romance) as they try to find a way of representing industrial landscapes, communities and the daily realities of industrial labour. It identifies the genesis in women's writing of tropes that would become central to later industrial fiction, including depictions of industrial accident, injury, death and disability. And it explores the representation of social relations (class, gender, ethnicity, sexuality) and conflict on this tumultuous, dangerous new stage.

  11. AN APPLICATION OF ANALYTIC HIERARCHY PROCESS IN THE HOSPITALITY INDUSTRY

    Directory of Open Access Journals (Sweden)

    DEMET BAYRAKTAR

    2013-05-01

    Full Text Available AHP is introduced as a decision making tool for the evaluation of investment alternatives in the hospitality industry. Services are intangible and perishable outputs that are created and consumed simultaneously or nearly simultaneously. The AHP, as a systematic approach that encompasses subjective criteria, alleviates the difficulties encountered in the evaluation of service industry operations. The proposed hierarchical structure in this paper deals with a minor investment project of the holiday village. However, it is possible to extend and apply it for larger investment projects in the hospitality industry as a decision making tool through clustering. Expert Choice for Windows (Version 9.0 is used to solve the decision problem.

  12. Industry sponsorship and research outcome

    DEFF Research Database (Denmark)

    Lundh, Andreas; Lexchin, Joel; Mintzes, Barbara

    2017-01-01

    BACKGROUND: Clinical research affecting how doctors practice medicine is increasingly sponsored by companies that make drugs and medical devices. Previous systematic reviews have found that pharmaceutical-industry sponsored studies are more often favorable to the sponsor's product compared...... on the association between sponsorship and research outcome. OBJECTIVES: To investigate whether industry sponsored drug and device studies have more favorable outcomes and differ in risk of bias, compared with studies having other sources of sponsorship. SEARCH METHODS: In this update we searched MEDLINE (2010......, systematic reviews and meta-analyses that quantitatively compared primary research studies of drugs or medical devices sponsored by industry with studies with other sources of sponsorship. We had no language restrictions. DATA COLLECTION AND ANALYSIS: Two assessors screened abstracts and identified...

  13. Research on Risks and Forecasting Countermeasures of Hainan Banana Industry

    OpenAIRE

    Liu, Yan-qun; Zeng, Xiao-hong; Fang, Jia

    2011-01-01

    Based on the overviews of the current conditions of Hainan banana industry, the research makes an analysis of the risks faced by Hainan banana industry. They are respectively marketing risks, natural risks, information risks and production risks. In order to promote a sustainable and rapid development of Hainan banana industry, Countermeasures are proposed in the research. The first is to strengthen the leading organization of forecasting mechanisms on banana industry. The second is to establ...

  14. The Economic and Social Consequences of Gambling on the Tourism Industry in Macau

    OpenAIRE

    Wong, Weng U

    2007-01-01

    Macau is known as the Eastern Monte Carlo, her main industry of gambling makes Macau a rapid economic expansion and brings Macau a lot of job opportunities. However, in recent years, crime and negative social impacts have increased as a result of this industry. Gambling making Macau's economic structure lopsided and fragile as well as bring a series of social problems to Macau. This dissertation illustrates both the positive and negative impacts that Macau's gambling industry is having on int...

  15. The international space station: An opportunity for industry-sponsored global education

    Science.gov (United States)

    Shields, Cathleen E.

    1999-01-01

    The International Space Station provides an excellent opportunity for industry sponsorship of international space education. As a highly visible worldwide asset, the space station already commands our interest. It has captured the imagination of the world's researchers and connected the world's governments. Once operational, it can also be used to capture the dreams of the world's children and connect the world's industry through education. The space station's global heritage and ownership; its complex engineering, construction, and operation; its flexible research and technology demonstration capability; and its long duration make it the perfect educational platform. These things also make a space station education program attractive to industry. Such a program will give private industry the opportunity to sponsor space-related activities even though a particular industry may not have a research or technology-driven need for space utilization. Sponsors will benefit through public relations and goodwill, educational promotions and advertising, and the sale and marketing of related products. There is money to be made by supporting, fostering, and enabling education in space through the International Space Station. This paper will explore various ISS education program and sponsorship options and benefits, will examine early industry response to such an opportunity, and will make the case for moving forward with an ISS education program as a private sector initiative.

  16. Combined material recycling study with aesthetic of entropy and place making.

    Science.gov (United States)

    Wen, Yifeng

    2015-01-01

    Green building is a hot topic today. The place making and urban cultures are also important issues in postindustrial society. The industrial heritage renovation projects provide a research opportunity in combination with both aspects. This paper tries to shed new light on this issue by interdisciplinary methods, to study six Guangzhou industrial heritage renovation projects, giving aesthetic values for six sites concerning place making and culture creation, especially giving an explanation for old building material's aesthetic performance in terms of concepts "entropy" and "archetype." The conclutions regard: the six places are brand spaces of "authentic Guangzhou" that make local experiential knowledge, emotional significance and creative communities in combination with historical and cultural narratives.

  17. Maritime Governance and Policy-Making

    CERN Document Server

    Roe, Michael

    2013-01-01

    A close analysis of the framework of existing governance and the existing jurisdictional arrangements for shipping and ports reveals that while policy-making is characterized by national considerations through flags, institutional representation at all jurisdictions and the inviolability of the state, the commercial, financial, legal and operational environment of the sector is almost wholly global. This governance mismatch means that in practice the maritime industry can avoid policies which it dislikes by trading nations off against one another, while enjoying the freedoms and benefits of a globalized economy. A Post-modern interpretation of this globalized society prompts suggestions for change in maritime policy-making so that the governance of the sector better matches more closely the environment in which shipping and ports operate. Maritime Governance and Policy-Making is a controversial commentary on the record of policy-making in the maritime sector and assesses whether the reason for continued polic...

  18. Industry's Commercial Initiatives on ISS

    Science.gov (United States)

    Shields, C. E.; Kessler, C.; Lavitola, M. S.

    2002-01-01

    For more than ten years, private industry has worked to develop a commercial human space market and to create a sustainable ISS commercial utilization customer base. Before ISS assembly was underway - and long before NASA and the international space agencies began to craft ISS commercial business terms and conditions - industry planted and nurtured the seeds of interest in exploiting human space utilization for commerce. These early initiatives have yielded the impetus and framework for industry approaches to ISS commercial utilization today and for NASA's and the International Partners' planned accommodation of private sector interests and desires on the ISS. This paper chronicles major industry initiatives for commercial ISS utilization, emphasizing successful marketing and business approaches and why these approaches have a higher likelihood of success than others. It provides an overview of individual companies' initiatives, as well as collaborative efforts that cross company lines and country borders; and it assesses the relative success of each. Rather than emphasize negative issues and barriers, this paper characterizes and prioritizes actionable success factors for industry and government to make ISS commercial utilization a sustainable reality.

  19. Submission to the Senate Standing Committee on Industry, Science and Technology Inquiry into the impact that Australian industry, science and technology can make to reducing the impact of the Greenhouse effect

    International Nuclear Information System (INIS)

    1989-08-01

    The submission makes some comments on historical aspects of comparisons between nuclear energy and non-nuclear strategies and technologies (including conservation/efficiency and renewable energy) and the relative economics of nuclear energy and conservation/efficiency strategies. It seek to place the nuclear factor within a larger perspective of choices and trade-offs and then to analyse that nuclear factor in more detail to demonstrate its potential and limitations and to counter misinformation and distortion about it. The nuclear techniques described in Section 2 provide Australia and the world with tools which not only can provide basic data about the Greenhouse effect in the immediate term, but can also contribute immediate term solutions to aspects of the problems which are either contributing to the Greenhouse effect (industrial processes) or likely to be affected by it in the near future (land and water uses). The Australian Nuclear Science and Technology Organization has many of these nuclear-related and non-nuclear techniques which can be of assistance in building up the data base on Greenhouse effects and developing techniques for controlling or reducing industrial and other sources of Greenhouse gases. Therefore, nuclear energy can be a longer term strategy which could be integrated into many countries' programs of actions to ameliorate the impact of global warning. 23 refs., 12 figs., 2 tabs

  20. Industrial vision

    DEFF Research Database (Denmark)

    Knudsen, Ole

    1998-01-01

    This dissertation is concerned with the introduction of vision-based application s in the ship building industry. The industrial research project is divided into a natural seq uence of developments, from basic theoretical projective image generation via CAD and subpixel analysis to a description...... is present ed, and the variability of the parameters is examined and described. The concept of using CAD together with vision information is based on the fact that all items processed at OSS have an associated complete 3D CAD model that is accessible at all production states. This concept gives numerous...... possibilities for using vision in applications which otherwise would be very difficult to automate. The requirement for low tolerances in production is, despite the huge dimensions of the items involved, extreme. This fact makes great demands on the ability to do robust sub pixel estimation. A new method based...

  1. Device for gamma-chamber transducer alignment

    International Nuclear Information System (INIS)

    Mirkhodzhaev, A.Kh.; Kuznetsov, N.K.; Ostryj, Yu.E.

    1987-01-01

    The device consists of the upper part of the gamma chamber pilar to which a rod is rigidly fastened with a disk of acrylic plastic moving freely on the opposite end. The disk is placed coaxially and is equal to the gamma chamber detector crystal. The device makes it possible to use ordinary medical couches covered with a porolone mattress when the gamma chamber detector is placed below

  2. Potential of energy efficiency measures in the world steel industry.

    NARCIS (Netherlands)

    Galama, Tjebbe

    2013-01-01

    SUMMARY The world steel industry plays a major role in energy use and Greenhouse Gas (GHG) emissions now and in the future. Implementing energy efficiency measures is among one of the most cost-effective investments that the industry could make in improv

  3. Pompes à chaleur dans l'industrie Heat Pumps in Industry

    Directory of Open Access Journals (Sweden)

    Benchecroun N.

    2006-11-01

    Full Text Available Les pompes à chaleur pourraient permettre une réduction de la consommation énergétique de l'industrie française estimée à 3,5 Mtep à l'horizon 1990 (300 000 tep en 1982. Ces installations se situeront dans les domaines du chauffage des locaux industriels, du séchage à basse température, du réchauffage de liquides et de certaines opérations de fractionnement. Pour les utilisations dans des procédés industriels les secteurs concernés sont principalement les industries agroalimentaires et, à plus long terme, celui de la chimie (y compris pétrochimie. On constate que les ventes de machines de forte puissance restent faibles (environ 500 de 1973 à 1982. Le climat général d'investissement, la nécessité d'adapter les procédés à l'utilisation d'une pompe à chaleur, et le faible niveau de température Heat pumps could be used to reduce energy consumption by French industry which may attain 3. 5 million tOE by 1990 (300 000 tOE in 1982. Such installations will be used in the fields of industrial space heating, low-temperature drying, the heating of liquids and various fractionating operations. For uses in industrial processes, the sectors involved are mainly agribusiness and food industries and, in the longer range, the chemical industry (including petrochemicals. Sales of high-powered machinery are still low (about 500 from 1973 to 1982. The general investment climate, the need to adapt processes to the use of heat pumps, and the low temperature level (< 120 °C of the heat delivered are the main factors holding back the penetration of this type of equipment in industry. The use of a nonazeotropic mixture of fluids (particularly hydrocarbons gives compression heat pumps a flexibility of adaptation which should help remove these technicalobstacles and thus make it easier for heat pumps to penetrate, especially in the chemical sector.

  4. The methanol industry's missed opportunities

    International Nuclear Information System (INIS)

    Stokes, C.A.

    1995-01-01

    Throughout its history the methanol industry has been backward in research and development and in industry cooperation on public image and regulatory matters. It has been extremely reticent as to the virtue of its product for new uses, especially for motor fuel. While this is perhaps understandable looking back, it is inexcusable looking forward. The industry needs to cooperate on a worldwide basis in research and market development, on the one hand, and in image-building and political influence, on the other, staying, of course, within the US and European and other regional antitrust regulations. Unless the industry develops the motor fuel market, and especially the exciting new approach through fuel cell operated EVs, to siphon off incremental capacity and keep plants running at 90% or more of capacity, it will continue to live in a price roller-coaster climate. A few low-cost producers will do reasonably well and the rest will just get along or drop out here and there along the way, as in the past. Having come so far from such a humble beginning, it is a shame not to realize the full potential that is clearly there: a potential to nearly double sales dollars without new plants and to produce from a plentiful resource, at least for the next half-century, all the methanol that can be imagined to be needed. Beyond that the industry can turn to renewable energy--the sun--via biomass growth, to make their product. In so doing, it can perhaps apply methanol as a plant growth stimulant, in effect making the product fully self-sustainable. The world needs to know what methanol can do to provide--economically and reliably--the things upon which a better life rests

  5. Regional competitiveness and territorial industrial development in Serbia

    Directory of Open Access Journals (Sweden)

    Zeković Slavka

    2009-01-01

    Full Text Available In the paper are investigated the regional competitiveness and the territorial aspects of industry in Serbia. There are analyzed the key recent movement in industrial development of Serbia and macrolocational factors and territorial organization of industry. The research of possible structural changes of industry and identification of its key development sectors is the important component of territorial development analysis in Serbia. This paper points to the kinds and types of industrial zones and industrial parks as fundamental models of regional and urban development of that activity with critical retrospection on the industrial zones in Serbia (greenfield and brownfield industrial locations. There are shown results of evaluation the regional competitiveness from a stand-point of possibilities of industrial development on the regional level (NUTS 3 by comparative analyses and Spider method. Results are used as one of the bases for making preliminary draft of territorial development scenario of this activity in Serbia and for the possible alocation of the future industrial zones and industrial parks in region level.

  6. The connection between academia and industry.

    Science.gov (United States)

    Singh, Ajai; Singh, Shakuntala

    2005-03-01

    patient welfare throughout, is the concern of the pharmaceutical industry.A very great potential conflict of interest lies in the fact that academia needs the sophisticated instruments that only big funding can provide, while at the same time resists the attempts of the fund provider to set the agenda of research, protocol, design, publication, the works. Conflicts arise at many steps and levels of functioning, and are related to the expectations, competing interests, and conflicting priorities of the different entities involved, whether they are the academic medical centers, the funding agencies, the patients and their families, or the investors and venture capitalists.The public expects access to new treatments. Its appetite for innovation has been bolstered by the constant attention given by the press to new treatments and by the implicit promise from researchers of continuing advances. Similarly, patients demand privacy and control over information about themselves.It makes greater sense for genuine researchers to associate with large long-term industry players who have a track record of genuine hard-core discoveries, even if the process is slow (maybe), and the funding less (may not be).The element of control venture capitalists exert over the pharmaceutical industry is an under researched area for obvious reasons. But it needs further probing, for that will lay bare the pulls and pressures under which industry works.It makes sense for ethically minded researchers and institutions not to fall in the trap of stocks and equity investments in industry, howsoever attractive they appear, and get rid of them as soon as possible if they have them. If at all they want, it makes more sense to own stocks of larger well established concerns, for the stock upheavals being less, the pressure of the market-place, and of venture sharks, is likely to be lower too.While active participation by the researcher in the commercialization process may be greatly desired by industry

  7. Cross-Industry Spatially Localized Innovation Networks

    Directory of Open Access Journals (Sweden)

    Aleksandr Evseevich Karlik

    2016-12-01

    Full Text Available This article’s objective is to develop conceptual approach to the study of key decision-making factors of cross-industry spatially localized innovation networks regularities by the application of quantitative and qualitative data of St. Petersburg Innovation and Technology Cluster of Machinery Manufacturing and Metalworking. The paper is based on the previous research findings which conclude that such networks have a set of opportunities and constraints for innovation. The hypothesis is that in the clusters, representing a special type of these networks, the spatial proximity partly offsets the negative impact of industrial distance. The authors propose a structural and logical model of strategic decision-making to analyze these effects on innovation. They specify network’s influences on performance: cognitive diversity; knowledge and expertise; structural autonomy and equivalence. The model is applied to spatially localized cross-industry cluster and then improved in accordance with the obtained results for accounting resource flows. It allowed to take into account the dynamics of innovation activity and to develop the practical implications in the particular business context. The analysis identified the peculiarities of spatially localized crossindustry innovation cooperation in perspective of the combinations of tangible resources, information and other intangible resources for the renewal of mature industries. The research results can be used in business as well as in industrial and regional economic policy. In the conclusion, the article outlines future research directions: a comprehensive empirical study with the analysis of data on the factors of cross-industry cooperation which were identified in this paper with testing of causal relations; the developing an approach to the study of spatially localized networks based on the exchange of primary resources in the economic system stability framework.

  8. Consequences of Globalisation for the Belgian Steel Industry

    OpenAIRE

    DE GROOTE, Patrick

    2008-01-01

    Since a few years the worldwide steel industry has been under the spell of a great consolidation wave and enhanced competition. 2006 was a peak year with the merger of the European group Arcellor Mittal Steel to ArcellorMittal. With this merger, ArcellorMittal became the greatest steel group in the world with a market share of more than 10%. Thanks to the consolidation trend, the steel industry has changed from an obsolete and loss-making industry to a modern, attractive and profitable busine...

  9. Industrial ecology: a new perspective on the future of the industrial system.

    Science.gov (United States)

    Erkman, S

    2001-09-22

    development and environmental issues in a fragmented and compartmentalised way. This is illustrated in the classical end-of-pipe strategy for the treatment of pollution, which has proven to be quite useful, but not adequate to make an efficient use of limited resources, in the context of a growing population with increasing economic aspirations. Thus, industrial ecology emerges at a time when it is becoming increasingly clear that the traditional pollution treatment approach (end-of-pipe) is not only insufficient to solve environmental problems, but also too costly in the long run.

  10. A Conceptual Framework for Procurement Decision Making Model to Optimize Supplier Selection: The Case of Malaysian Construction Industry

    Science.gov (United States)

    Chuan, Ngam Min; Thiruchelvam, Sivadass; Nasharuddin Mustapha, Kamal; Che Muda, Zakaria; Mat Husin, Norhayati; Yong, Lee Choon; Ghazali, Azrul; Ezanee Rusli, Mohd; Itam, Zarina Binti; Beddu, Salmia; Liyana Mohd Kamal, Nur

    2016-03-01

    This paper intends to fathom the current state of procurement system in Malaysia specifically in the construction industry in the aspect of supplier selection. This paper propose a comprehensive study on the supplier selection metrics for infrastructure building, weight the importance of each metrics assigned and to find the relationship between the metrics among initiators, decision makers, buyers and users. With the metrics hierarchy of criteria importance, a supplier selection process can be defined, repeated and audited with lesser complications or difficulties. This will help the field of procurement to improve as this research is able to develop and redefine policies and procedures that have been set in supplier selection. Developing this systematic process will enable optimization of supplier selection and thus increasing the value for every stakeholders as the process of selection is greatly simplified. With a new redefined policy and procedure, it does not only increase the company’s effectiveness and profit, but also make it available for the company to reach greater heights in the advancement of procurement in Malaysia.

  11. Industrial technology transfer

    International Nuclear Information System (INIS)

    Bulger, W.

    1982-06-01

    The transfer of industrial technology is an essential part of the CANDU export marketing program. Potential customers require the opportunity to become self-sufficient in the supply of nuclear plant and equipment in the long term and they require local participation to the maximum extent possible. The Organization of CANDU Industries is working closely with Atomic Energy of Canada Ltd. in developing comprehensive programs for the transfer of manufacturing technology. The objectives of this program are: 1) to make available to the purchasing country all nuclear component manufacturing technology that exists in Canada; and 2) to assure that the transfer of technology takes place in an efficient and effective way. Technology transfer agreements may be in the form of joint ventures or license agreements, depending upon the requirements of the recipient

  12. How to Find Bed Bugs

    Science.gov (United States)

    Find and correctly identify an infestation early before it becomes widespread. Look for rusty or reddish stains and pinpoint dark spots on bed sheets or mattresses, and search for bugs near the piping, seams and tags of the mattress and box spring.

  13. Combined Material Recycling Study with Aesthetic of Entropy and Place Making

    Directory of Open Access Journals (Sweden)

    Yifeng Wen

    2015-01-01

    Full Text Available Green building is a hot topic today. The place making and urban cultures are also important issues in postindustrial society. The industrial heritage renovation projects provide a research opportunity in combination with both aspects. This paper tries to shed new light on this issue by interdisciplinary methods, to study six Guangzhou industrial heritage renovation projects, giving aesthetic values for six sites concerning place making and culture creation, especially giving an explanation for old building material’s aesthetic performance in terms of concepts “entropy” and “archetype.” The conclutions regard: the six places are brand spaces of “authentic Guangzhou” that make local experiential knowledge, emotional significance and creative communities in combination with historical and cultural narratives.

  14. Industrial Biotechnology: Discovery to Delivery

    Science.gov (United States)

    Chotani, Gopal K.; Dodge, Timothy C.; Gaertner, Alfred L.; Arbige, Michael V.

    Fermentation products have penetrated almost every sector of our daily lives. They are used in ethical and generic drugs, clinical and home diagnostics, defense products, nutritional supplements, personal care products, food and animal feed ingredients, cleaning and textile processing, and in industrial applications such as fuel ethanol production. Even before knowing about the existence of microorganisms, for thousands of years ancient people routinely used them for making cheese, soy sauces, yogurt, and bread. Although humans have used fermentation as the method of choice for manufacturing for a long time, it is only now being recognized for its potential towards sustainable industrial development.

  15. Methods for converting industrial zones

    Science.gov (United States)

    Talipova, L.; Kosyakov, E.; Polyakova, Irina

    2017-10-01

    In this article, industrial zones of Saint Petersburg and Hong Kong were considered. Competitive projects aimed at developing the grey belt of Saint Petersburg were considered. The methodology of the survey of reconstruction of the industrial zone of Hong Kong is also analyzed. The potential of the city’s grey belt lies in its location on the border of the city’s historical centre. Rational use of this potential will make it possible to achieve numerous objectives, including development of the city’s transport infrastructure, positioning of business functions, and organization of housing and the city’s system of green public spaces.

  16. Environmental management in Slovenian industrial enterprises - Empirical study

    Directory of Open Access Journals (Sweden)

    Vesna Čančer

    2002-01-01

    Full Text Available timulated with the firm belief that environmental management helps enterprises to achieve business success, expressed by a majority of managers in the sample enterprises, we present the results of an empirical study in the Slovene processing industry. The purpose of our research work is to identify, analyse and present the importance of the environment in business decision-making, the role of environmental management in strategic decision-making and its distribution across the business functions; environmental performance in business processes; the use of the methods for environmentally oriented business decision-making and the developmental tendencies of environmental management in Slovene enterprises of the processing industry. We define the key drivers of environmental management and their effect on the environmental behaviour of these enterprises. We present and interpret data indicating that environmental management is caused not only by compliance and regulation, but also by competition and enterprises’ own initiative.

  17. Multi criteria analysis in the renewable energy industry

    CERN Document Server

    San Cristóbal Mateo, José Ramón

    2012-01-01

    Decision makers in the Renewable Energy sector face an increasingly complex social, economic, technological, and environmental scenario in their decision process. Different groups of decision-makers become involved in the process, each group bringing along different criteria therefore, policy formulation for fossil fuel substitution by Renewable Energies must be addressed in a multi-criteria context. Multi Criteria Analysis in the Renewable Energy Industry is a direct response to the increasing interest in the Renewable Energy industry which can be seen as an important remedy to many environmental problems that the world faces today. The multiplicity of criteria and the increasingly complex social, economic, technological, and environmental scenario makes multi-criteria analysis a valuable tool in the decision-making process for fossil fuel substitution. The detailed chapters explore the use of the Multi-criteria decision-making methods and how they provide valuable assistance in reaching equitable and accept...

  18. Configuration of supply chains in emerging industries: a multiple-case study in the wave-and-tidal energy industry

    OpenAIRE

    Bjørgum, Øyvind; Netland, Torbjørn H.

    2017-01-01

    Companies in emerging industries face particular challenges in configuring effective supply chains. In this paper, we build on transaction cost economics to explore how supply chains can be configured in emerging industries. We focus on two key aspects of supply chain configuration: the make-or-buy decision and the strength of the ties between a focal firm and its suppliers. We utilise a multiple-case study methodology, including seven start-up companies in the emerging wave-and-tidal energy ...

  19. Game theory approach in decisional process of energy management for industrial sector

    International Nuclear Information System (INIS)

    Aplak, H. Soner; Sogut, M. Ziya

    2013-01-01

    Highlights: • Decision-making process of the industry and the environment are evaluated in a game theoretic approach. • Industry and environment are considered as two players to find optimal strategies in governing energy policy. • Industry plays its renewable energy usage strategy. • Environment prefers to execute its protection reflex strategy for survivability and sustainability. • The industry’s insistence on the use of fossil fuels will forward strategy for the environment of uncertainty. - Abstract: Intensive energy consuming industrial sectors are the most important actors on global climate change which natural habitat and the environment faced. In this study, by the scope of energy management, decision-making process of the industry and the environment are evaluated in a game theoretic approach. Industry and environment are considered as two players which have conflicting objectives and try to find optimal strategies in governing energy policy. According to concept of study, while industry tries to maintain the sustainability of production with the strategies of fossil fuel, renewable energies, energy recovery and nuclear energy usage, environment exhibits reactive approach to ensure its sustainability. In the flow of study, players’ strategies are analyzed by using Multi-Criteria Decision Making (MCDM) methods and by calculating performance efficiency values of strategies, game payoff matrix is obtained. Finally, optimal strategies are found for both industry and environment in orienting their energy policy and results are evaluated. According to results of the payoff matrix, the equilibrium point is the cell (2, 1) with the values of 0.5324 and 0.5619. This implies that the environment develops protective reflexes for sustainable nature in case of using renewable energy in industry

  20. Supply chain collaboration in industrial symbiosis networks

    DEFF Research Database (Denmark)

    Herczeg, Gabor; Akkerman, Renzo; Hauschild, Michael Zwicky

    2018-01-01

    A strategy supporting the development towards a circular economy is industrial symbiosis (IS). It is a form of collaborative supply chain management aiming to make industry more sustainable and achieve collective benefits based on utilization of waste, by-products, and excess utilities between...... economically independent industries. Based on an extensive analysis of published studies on existing IS collaborations and interviews with central stakeholders of a comprehensive IS, this paper investigates IS from a supply chain collaboration perspective. A theoretical framework is built and used to discuss...... how industrial symbiosis pursues sustainability and to identify the main collaboration aspects and performance impacts. This framework is then used in the analysis of selected published cases. Based on this, we derive propositions on the organizational and operational requirements for collaboration...

  1. The Vision of "Industrie 4.0" in the Making-a Case of Future Told, Tamed, and Traded.

    Science.gov (United States)

    Pfeiffer, Sabine

    2017-01-01

    Since industrial trade fair Hannover Messe 2011, the term "Industrie 4.0" has ignited a vision of a new Industrial Revolution and has been inspiring a lively, ongoing debate among the German public about the future of work, and hence society, ever since. The discourse around this vision of the future eventually spread to other countries, with public awareness reaching a temporary peak in 2016 when the World Economic Forum's meeting in Davos was held with the motto "Mastering the Fourth Industrial Revolution." How is it possible for a vision originally established by three German engineers to unfold and bear fruit at a global level in such a short period of time? This article begins with a summary of the key ideas that are discussed under the label Industrie 4.0. The main purpose, based on an in-depth discourse analysis, is to debunk the myth about the origin of this powerful vision and to trace the narrative back to the global economic crisis in 2009 and thus to the real actors, central discourse patterns, and hidden intentions of this vision of a new Industrial Revolution. In conclusion, the discourse analysis reveals that this is not a case of visioneering but one of a future told, tamed, and traded.

  2. Environmental assessment: Industry perspective

    International Nuclear Information System (INIS)

    Meadley, T.

    1994-01-01

    The Canadian mining industry supports the concept of environmental assessment, but the current process at the time of the conference had a number of problems that the industry felt should be addressed. The author makes the following suggestions: that the process for individual projects should be separated from policy issues; that panel members should be drawn from a full-time staff; that there should be better referral criteria to determine which projects require full scale assessment including public hearings; that either the government or project opponents should participate but not both; that the financial burden on proponents should be reduced; that funding of intervenors should be controlled; that there should be a definite time frame

  3. Decision making in Global Product Development: Case studies from Danish industry

    DEFF Research Database (Denmark)

    Søndergaard, Erik Stefan; Ahmed-Kristensen, Saeema

    2015-01-01

    Globalisation leads engineering firms to replace traditional co-located development with global distributed development activities. They make decisions regarding global product development; often with limited experience and information available. Previous research points towards a need for better...

  4. The Internet Marketing Solution Toward Creative Industries in Bandung

    OpenAIRE

    Aditya M Salya

    2010-01-01

    This paper discribe a role of internet marketing toward creative industries in Bandung. How Internet Marketing can help the creative industries to access the market through internet. Bandung, as emerging city for creative industries in Indonesia has shown the great developent of small medium entreprise, that create the potential market. We highlight what is the tools of internet marketing as promotion that make customer interest to buy the product and at the end the impact of internet marketi...

  5. Managing innovation: lessons from the cardiac-pacing industry.

    Science.gov (United States)

    Gobeli, D H; Rudelius, W

    1985-01-01

    In this article, the authors argue that innovation is a surefire way for a firm to increase its sales and market share. This, in turn, can stimulate American industries and make American firms more competitive in international markets. Through their study of the cardiac-pacing industry, they draw conclusions about what factors contribute to a successful innovation in other industries besides medical electronics. They identify general patterns and stages of the innovation process, key roles top management must fill in an organization, and effective policies that foster important innovations.

  6. International divestment and restructuring decisions (with special reference to the motor industry).

    OpenAIRE

    Casson M

    1986-01-01

    ILO pub. Working paper on specific industry restructuring and plant shutdown in the motor vehicle industry in Western Europe - discusses industrial policy issues, enterprise level decision making, production, management, marketing, and the need for rationalization and economies of scale; includes a case study of Peugeot's acquisition of Chrysler. Bibliography, statistical tables.

  7. Principles of risk-based decision making

    National Research Council Canada - National Science Library

    United States. Coast Guard. Risk based decision-making guidelines

    2001-01-01

    ... original content in order to make this product more generically applicable and less Coast Guard specific. h s k assessment and risk management are important topics in industry and government. Because of limited resources and increasing demands for services, most organizations simply cannot continue business as usual. Even if resources are not dec...

  8. [Simplified models of analysis of the sources of risk and biomechanical overload in craft industries: application experience in wooden barrel making].

    Science.gov (United States)

    Pressiani, Sofia

    2011-01-01

    Barrel making is an ancient art evidence of which is found in paintings from the Egyptian era in the Mediterranean civilizations, and since it was an ideal shipping container its use spread quickly and on a wide scale. The study was conducted in a small high quality craft industry, applying the method which is the topic of this volume, i.e., risk pre-mapping by which it is possible to identify the presence or absence of occupational risk and any need for further evaluation. The study showed the presence of health risks for workers, which were mainly physical (noise, vibrations produced by machinery and equipment typical of the craft, and risks from hardwood dust, in addition to the traditional risks of biomechanical overload of the upper limbs. Today, the barrel maker is a professional craft of excellence and quality, dedicated to the creation of large barrels and vats, using woods of different essences depending on the organoleptic qualities that it is desired should influence the final flavour of the wine: the manual art and the equipment are ancient but the technology used to achieve the final product is necessarily advanced. So far issues of safety and health risks related to this type of industry have received little attention and the risks poorly evaluated, with the possibility that occupational diseases may occur among the operators, particularly of the skeletal-muscular type.

  9. State of the industry

    International Nuclear Information System (INIS)

    Lilly, P.; Ogden, S.O.; Sell, D.P.; Garges, T.W.

    1991-01-01

    This panel discussion on the state of the US coal industry presented three points of view. The issue is one of perspective, for the coal miner current conditions are not particularly encouraging given the economic climate, environmental issues, and the ambiguity of the proposed National Energy Strategy. To make matters worse, much of the public views the production and utilization of coal as an environmental risk. It is easy to overlook the fact that the US coal industry is poised for tremendous growth and opportunity. Demand for energy and electricity worldwide is projected to increase significantly and coal is expected to play a major role. New technologies such as clean coal combustion and coal gasification will be required to meet growing human and environmental requirements. The coal industry must educate the public on the capabilities of coal, advance new technologies for deployment and commercial development, demonstrate prudent mining and safety records and develop human talent and skills necessary to advance US coal in the 21st century

  10. An overview of current situations of robot industry development

    Directory of Open Access Journals (Sweden)

    Wu Qiong

    2018-01-01

    Full Text Available As an industry of emerging technology, robot industry has become one of important signs to evaluate a country’s level in science and technology innovation and high-end manufacturing, and an important strategic field to take the preemptive opportunities in development of intelligent society. Developed countries such as the USA, Germany, France and Japan have formulated their robot R&D strategies and planning in succession. China boasts good industrial foundation and has made encouraging progress in the course of development of robot technology. This paper briefly discusses the application type of robot industry and current situations of robot industry development in countries around the world, and makes detailed explanation of current situations of robot industry development in China.

  11. Uncertain multi-attribute decision making methods and applications

    CERN Document Server

    Xu, Zeshui

    2015-01-01

    This book introduces methods for uncertain multi-attribute decision making including uncertain multi-attribute group decision making and their applications to supply chain management, investment decision making, personnel assessment, redesigning products, maintenance services, military system efficiency evaluation. Multi-attribute decision making, also known as multi-objective decision making with finite alternatives, is an important component of modern decision science. The theory and methods of multi-attribute decision making have been extensively applied in engineering, economics, management and military contexts, such as venture capital project evaluation, facility location, bidding, development ranking of industrial sectors and so on. Over the last few decades, great attention has been paid to research on multi-attribute decision making in uncertain settings, due to the increasing complexity and uncertainty of supposedly objective aspects and the fuzziness of human thought. This book can be used as a ref...

  12. Taking control: how citizens can hold industry to account

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, Emma; Schwarte, Christoph; Cotula, Lorenzo; Garside, Ben; Siegele, Linda

    2009-01-15

    The oil, gas and mining industries look set to remain major players in global development, despite urgent efforts to end the world's fossil fuel dependency and diversify energy sources. The activities of the extractive industries often impinge directly, and sometimes harshly, on communities and the environment. But local people are rising to the challenge. From Azerbaijan to Nigeria, Kazakhstan, Mali and Mongolia, citizens are working to promote transparency, accountability and responsible practice in these industries. A lack of skills and resources can impede crucial progress – so knowing the tools that work to make industry accountable is key.

  13. Pressure relieving support surfaces (PRESSURE) trial: cost effectiveness analysis.

    Science.gov (United States)

    Iglesias, Cynthia; Nixon, Jane; Cranny, Gillian; Nelson, E Andrea; Hawkins, Kim; Phillips, Angela; Torgerson, David; Mason, Su; Cullum, Nicky

    2006-06-17

    To assess the cost effectiveness of alternating pressure mattresses compared with alternating pressure overlays for the prevention of pressure ulcers in patients admitted to hospital. Cost effectiveness analysis carried out alongside the pressure relieving support surfaces (PRESSURE) trial; a multicentre UK based pragmatic randomised controlled trial. 11 hospitals in six UK NHS trusts. Intention to treat population comprising 1971 participants. Kaplan Meier estimates of restricted mean time to development of pressure ulcers and total costs for treatment in hospital. Alternating pressure mattresses were associated with lower overall costs (283.6 pounds sterling per patient on average, 95% confidence interval--377.59 pounds sterling to 976.79 pounds sterling) mainly due to reduced length of stay in hospital, and greater benefits (a delay in time to ulceration of 10.64 days on average,--24.40 to 3.09). The differences in health benefits and total costs for hospital stay between alternating pressure mattresses and alternating pressure overlays were not statistically significant; however, a cost effectiveness acceptability curve indicated that on average alternating pressure mattresses compared with alternating pressure overlays were associated with an 80% probability of being cost saving. Alternating pressure mattresses for the prevention of pressure ulcers are more likely to be cost effective and are more acceptable to patients than alternating pressure overlays.

  14. Transition in the nuclear industry

    International Nuclear Information System (INIS)

    Olyniec, J.H.

    1985-01-01

    Not long ago, nuclear energy was forecast to be the dominant force in the utility industry. An environmentally safe clean and inexpensive way to produce electricity would be welcomed by all. Civil engineering challenges on the leading edge of technology awaited the designer and constructor. As we now know, changes within the past 10 years have taken place that radically alter this outlook. Energy demand, thought to be ever increasing, was shocked by the rising costs. Plant construction delays, coupled with ever increasing regulatory requirements and higher interest rates, fueled the spiral or more cost. Economy of operation became overwhelmed by utility debt burden. Where is the nuclear utility industry now and what direction can we foresee. this symposium addresses the nuclear industry past, present, and future. The first session highlights some lessons learned from past experiences that must be applied in the future to be beneficial. Existing and future challenges are presented in the sessions on plant modifications and nuclear waste and decommissioning. The final session looks at the nuclear industry in transition from the perspectives of the different segments that make up the industry

  15. The future of the electric utility industry in Canada

    International Nuclear Information System (INIS)

    Threlkeld, R.

    1995-01-01

    A discussion of future changes in the electric power utility industry in Canada was presented. The impacts of deregulation were considered, including increased competition, and reduced profits resulting from it. Restructuring measures taken by BC Hydro to prepare for industry changes were described. Competition was not only expected to result from new electric utilities, but also gas utilities that are establishing themselves in the home heating business. Emphasis was placed on making the utilities' priorities, the same as their customers'. Flexibility of rate scheduling and increased dependence on customer-owned generation were needed to remain competitive. Exportation of surplus electricity and development of power utilities in developing nations was considered as a potentially lucrative development strategy. It was suggested that making use of strategic alliances within Canada and worldwide, will help to keep utilities ahead of the competition. A warning was issued to the effect that environmental concerns must always be considered well in advance of regulations since they are continually becoming more stringent. Making common cause with customers, and continuous improvement were considered to be the most important keys to future success for the industry

  16. Economic structure and performance of forest-based industries

    International Nuclear Information System (INIS)

    O'Laughlin, J.

    1989-01-01

    This paper reports on the economic structure, conduct, and performance of industries dependent on the nation's forests that are topics of special importance for research. A major challenge to research involving industrial organization of forest-based industries is to link descriptions of structure, conduct, and industrial performance in ways that facilitate public and private policy making. Not to be overlooked is the need to continue efforts to monitor changes in structure and conduct dimensions at the national level and to conduct baseline studies of industry structure-conduct-performance at regional, state, and local levels. Specifically needed is research that will improve understanding of restructuring within the wood-based industry; definitions of the wood-based industry and segments thereof; linkages between structure and regional economic development; timberland as a managerial and economic variable; structural consequences of technological innovations; corporate strategies as related to performance; structural dimensions in an international setting; and structure and performance of nonwood-based forest industries. Economics research focused in such directions will go far toward improving the manner in which the nation's many forest industries organize and conduct their activities

  17. The refinery industry within the Mediterranean area

    International Nuclear Information System (INIS)

    1999-01-01

    During the period 1997-1998 Ome (Observatorie Mediterraneen de l'Energie) within a working group which was formed by the experts among the associated companies, has carried on an analysis on the prospects of refinery industry in the Mediterranean area in view of 2010. The aim of this study was to make clear, to the different operators, the consequences of the political choices in investments on refinery industry in the context of the progressive liberalization of the sector [it

  18. Barriers, drivers and decision-making process for industrial energy efficiency: A broad study among manufacturing small and medium-sized enterprises

    International Nuclear Information System (INIS)

    Trianni, Andrea; Cagno, Enrico; Farné, Stefano

    2016-01-01

    Highlights: • Barriers and drivers vary along the decision-making process of EEM adoption. • Economic barriers, awareness and behavioural are most critical. • Beside economic drivers, major relevance of regulatory and vocational training. • Importance of stakeholders providing technical support. • Barriers and drivers are different according to several firm characteristics. - Abstract: Energy efficiency has been recognized as a primary means to increase the competitiveness of the industrial sector, and in particular for small and medium-sized enterprises (SMEs), in which energy efficiency measures (EEMs) are scarcely implemented. For this reason, future policies should carefully address such issue. Hence, it is really crucial to have a precise and punctual knowledge of the barriers to be tackled in the decision-making process of adopting an EEM and the drivers to be promoted. This study discussed the findings from a broad investigation within 222 manufacturing SMEs located in a Northern Italy region. Beside economic issues particularly affecting SMEs, awareness and behavioural issues emerge as critical, affecting the very first steps of the decision-making process, related to the punctual identification and evaluation of plausible EEMs. The support from manufacturers, technology suppliers, installers and ESCOs supporting SMEs through vocational training drivers (e.g. technical support) is really important to tackle such issues. More generally, beside financial institutions, the supply chain of technologies is recognized as particularly useful for supporting enterprises in the adoption of EEMs. Additionally, having previously conducted energy audit and implemented EEMs are critical factors able to highlight non-economic barriers and drivers. Therefore, the promotion of EEMs will necessarily imply a further effort in pointing out the so-called non-energy benefits (NEBs) from the implementation of EEMs. Finally, our study reveals that smaller and non

  19. The alcohol industry, charities and policy influence in the UK

    Science.gov (United States)

    Lyness, Sarah M

    2014-01-01

    Background: Charities exist to pursue a public benefit, whereas corporations serve the interests of their shareholders. The alcohol industry uses corporate social responsibility activities to further its interests in influencing alcohol policy. Many charities also seek to influence alcohol and other policy. The aim of this study was to explore relationships between the alcohol industry and charities in the UK and whether these relationships may be used as a method of influencing alcohol policy. Methods: The charity regulator websites for England and Wales and for Scotland were the main data sources used to identify charities involved in UK alcohol policy making processes and/or funded by the alcohol industry. Results: Five charities were identified that both receive alcohol industry funding and are active in UK alcohol policy processes: Drinkaware; the Robertson Trust; British Institute of Innkeeping; Mentor UK and Addaction. The latter two are the sole remaining non-industry non-governmental members of the controversial responsibility deal alcohol network, from which all other public health interests have resigned. Conclusion: This study raises questions about the extent to which the alcohol industry is using UK charities as vehicles to further their own interests in UK alcohol policy. Mechanisms of industry influence in alcohol policy making globally is an important target for further investigations designed to assist the implementation of evidenced-based policies. PMID:24913316

  20. Industrial Foundations in the Danish Economy

    DEFF Research Database (Denmark)

    Thomsen, Steen

    Industrial Foundations (foundations that own business companies) are found around the world e.g in Northern Europe, Germany, the US and India, but nowhere do they appear to be as economically important as in Denmark. In this paper we review their share of the Danish economy. We find that foundation......-owned companies account for 5-10% of the Danish economy depending on measurement. However, they constitute the bulk of Danish stock market capitalization and R&D expenditure, and they also contribute disproportionally to international business activity. Finally the industrial foundations make charitable donations...

  1. Industry role stressed at backfit workshop

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    A new approach to backfitting nuclear power plants in accordance with Nuclear Regulatory Commission (NRC) rules could lower costs and make backfitting procedures less unpredictable. The NRC described the approach in a series of regional workshops with utilities. The author explains how and when a backfit analysis is to be made, how priorities are set, exceptions, and the role assigned to the industry and the NRC. Disagreement between NRC and utilities over backfitting will not lead to retribution against the utility. Instead, the objective is to bring industry more into a partnership role. 2 tables

  2. Application of radiation and isotopes in industry

    International Nuclear Information System (INIS)

    Andrzej, G. Chmielewski

    2006-01-01

    Full text: A vast variety of nuclear techniques is available for industrial, environmental, medical and research applications. Sealed or open radioisotope sources are applied as radiotracer in the system, in nucleonic gauges, in non destructive testing and in nuclear analytical techniques. Beside of isotopes X-ray tubes and accelerators operated in e-/X mode as a source of radiation are applied as well. These methods are used for process and material control, non-destructive evaluation of wells, castings and assembled machinery help to make industrial processes safer and more cost effective. For natural resource exploration radiotracers (RTT), sealed sources and nucleonic gauges (NCS) are used in the oil industry, in mineral processing and waste water treatment plants. Radioisotopes make important contributions in several sectors of economic significance including medicine industry, agriculture, structural safety and research. They are generally produced in research reactors or cyclotrons. More than 150 different radioisotopes in different forms are in use for various applications. Non-destructive testing (NDT) is essential for quality assurance of various products in diverse industries and construction projects apart from well established NDT protocols for industrial components, machinery and chemical pipelines, new techniques and applications, such as digital radiography for ecological safety, online inspection of concrete structures and pipe corrosion, are being developed. The new applications concern cargo inspection where Co 60 or e-/X sources are used. Radioisotopes are applied as radiotracers in industry and environment. Oil fields and refineries, chemical and metallurgical industries and wastewater purification installations are the end users benefiting from radioisotope techniques. Radioisotope techniques (radiotracers, gamma scanning, tomography and single particle tracking) are extensively used to identify and quantify multiphase reactors (phase hold

  3. KEUNGGULAN KOMPETITIF INDUSTRI KECIL DI KLASTER INDUSTRI KECIL TRADISIONAL DENGAN PENDEKATAN BERBASIS SUMBER DAYA: STUDI KASUS PENGUSAHA INDUSTRI KECIL LOGAM KIARA CONDONG, BANDUNG

    Directory of Open Access Journals (Sweden)

    Widjajani Widjajani

    2008-01-01

    Full Text Available Small-scale industries play an important role in the betterment of society. Industrial cluster approach has been used by government as an alternative government policy to increase competitiveness of small-scale industries in Indonesia. An industry cluster consists of core enterprise(s and related enterprises in which the core acts as a pulling agent for the other counterparts. Therefore, developing the core enterprises is expected to increase competitiveness of the whole cluster. This research is a strategy process research, aiming at identifying and modeling strategic behavior of a successful entrepreneur in a metal-making cluster industry at Kiara Condong Bandung, West Java. Based on the literature review, qualitative research methodology is used in this research by combining soft systems methodology (SSM and grounded theory. The major findings of this research indicate four kinds of strategic behavior models, namely behavior model of strategy setting, behavior model of production operations, behavior model of research and development and innovation and behavior model of marketing operations. Abstract in Bahasa Indonesia: Industri kecil mempunyai peranan penting dalam meningkatkan kesejahteraan masyarakat. Pendekatan klaster industri dicanangkan oleh pemerintah sebagai alternatif kebijakan pemerintah untuk membangun keunggulan kompetitif di industri kecil. Di suatu klaster industri kecil yang terdiri dari unit usaha inti dan unit usaha penunjang, unit usaha inti merupakan gerbong penghela klaster. Oleh karena itu mengembangkan usaha inti sehingga mempunyai keunggulan kompetitif diharapkan dapat mengembangkan klaster secara keseluruhan. Penelitian ini merupakan penelitian proses strategi (strategy process research yang meneliti perilaku strategis manajer pemilik industri kecil dalam mengelola usahanya untuk membangun keunggulan kompetitif dengan pendekatan berbasis sumber daya (Resource-Based View atau RBV dan mengambil studi kasus pengusaha

  4. The Importance of Informatics for Health Care Industry

    Directory of Open Access Journals (Sweden)

    Abdullah Talha Kabakuş

    2016-09-01

    Full Text Available There is no industry that does not benefit from the advantages of information technology (IT. Health care industry is no different from them. IT solutions are used to minimize the human resource required for labor-intensive or time consuming tasks by automating them, benefit from the intelligent software solutions that not just store the data in electronic format but also ease the decision making process, accelerate the business processes by providing services simultaneously, and provide maintainable and consistent services. Despite all of these advantages, health care industry spends only 2% of its revenues on technology, which is very limited when it is compared to other industries that spend around 10%.

  5. 78 FR 46952 - Relief-Mart, Inc.; Analysis of Proposed Consent Order To Aid Public Comment

    Science.gov (United States)

    2013-08-02

    ... representations that a memory foam mattress lacks the common smell associated with memory foam to mean that the... involves respondent's marketing and sale of memory foam mattresses. According to the FTC's complaint... off-gassing, and lack the odors commonly associated with memory foam. The complaint alleges that...

  6. Decubitus prophylaxis

    DEFF Research Database (Denmark)

    Andersen, Klaus Ejner; Jensen, O; Kvorning, S A

    1983-01-01

    Six hundred patients at risk for pressure sores were randomized in either a control group or one of two experimental groups placed on alternating-pressure air-mattresses and water-mattresses. The groups remained comparable throughout the 10-day study period. Twenty-one patients from the control...

  7. Making Fashion Sustainable : The Role of Designers

    NARCIS (Netherlands)

    van der Velden, N.M.

    2016-01-01

    The dissertation ‘Making Fashion Sustainable – The Role of Designers’ describes the PhD research of Natascha M. van der Velden on the envisioned role designers could take responsibility for in the transition towards a more sustainable fashion industry.
    The current worldwide textile and apparel

  8. P.C. disposal decisions: a banking industry case study

    Science.gov (United States)

    Shah, Sejal P.; Sarkis, Joseph

    2002-02-01

    The service industry and the manufacturing industry are interlinked in a supply chain situation. Part of the effectiveness of some manufacturing industry environmental performance based on remanufacturing and recycling is dependent on service industry decisions. In the information technology arena, personal computers (PCs) are the hard equipment of the service industry. The end-of-life decisions made by the service industry, and in this case the banking industry will have implications for the amount of systems within the waste or reverse logistics stream for manufacturers. Looking at some of the issues (and presenting a model for evaluation) related to decision making concerning end-of-life disposition for PCs is something this paper investigates. The analytical hierarchy process (AHP) is applied in this circumstance. The development of the model, its application, and results, provide the basis for much of the discussion in this paper.

  9. Making Designs on Fashion: Producing Contemporary Indian Aesthetics

    OpenAIRE

    Varma, Meher

    2015-01-01

    This dissertation is about the making of the Indian fashion designer and highlights how the birth of the industry has fashioned new subjects and subjectivities. It traces constitutive shifts and tensions in the fashion industry over the last three decades, including the rise of bridal wear or couture, the appropriation of craft and resistances to it, and the return of ready-to-wear production via e-commerce. I argue that the professional identity of the fashion designer was crafted in opposit...

  10. Should care homes adopt a static-led approach to pressure ulcer prevention?

    Science.gov (United States)

    Keen, Delia Catherine

    A static-led approach refers to the provision of high-specification foam mattresses for the whole of a population at risk of pressure damage. Such mattresses have been found to reduce the risk of pressure ulceration and cost less overall than standard mattresses, even in populations where only 1 in 100 patients develops a pressure ulcer. Reduced pressure ulcer prevalence and reduced costs resulting from decreased expenditure on dynamic mattresses following the implementation of a static-led approach have been reported. Pressure ulcers cause pain, a reduced quality of life, loss of independence, depression and social isolation for those in whom they develop. Organizations are increasingly having to pay out large sums of money following litigation surrounding pressure ulcers. This article explains why NHS healthcare providers and private care organizations need to work together to consider implementing a static-led approach to pressure ulcer prevention within care homes in order to reduce pressure ulcer incidence cost-effectively within their local populations.

  11. Birth of Industry 5.0: Making Sense of Big Data with Artificial Intelligence, "The Internet of Things" and Next-Generation Technology Policy.

    Science.gov (United States)

    Özdemir, Vural; Hekim, Nezih

    2018-01-01

    Driverless cars with artificial intelligence (AI) and automated supermarkets run by collaborative robots (cobots) working without human supervision have sparked off new debates: what will be the impacts of extreme automation, turbocharged by the Internet of Things (IoT), AI, and the Industry 4.0, on Big Data and omics implementation science? The IoT builds on (1) broadband wireless internet connectivity, (2) miniaturized sensors embedded in animate and inanimate objects ranging from the house cat to the milk carton in your smart fridge, and (3) AI and cobots making sense of Big Data collected by sensors. Industry 4.0 is a high-tech strategy for manufacturing automation that employs the IoT, thus creating the Smart Factory. Extreme automation until "everything is connected to everything else" poses, however, vulnerabilities that have been little considered to date. First, highly integrated systems are vulnerable to systemic risks such as total network collapse in the event of failure of one of its parts, for example, by hacking or Internet viruses that can fully invade integrated systems. Second, extreme connectivity creates new social and political power structures. If left unchecked, they might lead to authoritarian governance by one person in total control of network power, directly or through her/his connected surrogates. We propose Industry 5.0 that can democratize knowledge coproduction from Big Data, building on the new concept of symmetrical innovation. Industry 5.0 utilizes IoT, but differs from predecessor automation systems by having three-dimensional (3D) symmetry in innovation ecosystem design: (1) a built-in safe exit strategy in case of demise of hyperconnected entrenched digital knowledge networks. Importantly, such safe exists are orthogonal-in that they allow "digital detox" by employing pathways unrelated/unaffected by automated networks, for example, electronic patient records versus material/article trails on vital medical information; (2) equal

  12. Shaking Up Biotech/Pharma: Can Cues Be Taken from the Tech Industry?

    Science.gov (United States)

    Wang, C Katherine

    2017-06-01

    The biotech and pharma (biotech/pharma) industry is in dire need of finding ways to increase efficacy, efficiency, and affordability of its products. The information and technology industry ("tech") industry, which is an industry similarly founded on inventions and innovation, may provide some food for thought. This perspective will demonstrate the shift that biotech/pharma is already making and will propose that the industry has an opportunity to compel change by adopting some aspects of the tech industry with regards to models for technology/product development and leadership attributes.

  13. Nuclear energy and the steel industry

    International Nuclear Information System (INIS)

    Barnes, R.S.

    1977-01-01

    Fossil fuels represent a large part of the cost of iron and steel making and their increasing cost has stimulated investigation of methods to reduce the use of fossil fuels in the steel industry. Various iron and steel making routes have been studied by the European Nuclear Steelmaking Club (ENSEC) and others to determine to what extent they could use energy derived from a nuclear reactor to reduce the amount of fossil fuel consumed. The most promising concept is a High-Temperature Gas-Cooled Nuclear Reactor heating helium to a temperature sufficient to steam reform hydrocarbons into reducing gases for the direct reduction of iron ores. It is proposed that the reactor/reformer complex should be separate from the direct-reduction plant/steelworks and should provide reducing gas by pipeline, not only to a number of steel works but to other industrial users. The composition of suitable reducing gases and the methods of producing them from various feedstocks are discussed. Highly industrialised countries with large steel and chemical industries have shown greatest interest in the concept, but those countries with large iron-ore reserves and growing direct capacity should consider the future value of the High-Temperature Gas-Cooled Reactor as a means of extending the life of their gas reserves. (author)

  14. Bureaucratic, engineering and economic men: decision-making for technology in tanzania's state-owned enterprises.

    OpenAIRE

    James, J

    1983-01-01

    ILO pub-WEP pub. Study of the relationship between national planning objectives and capital intensive choice of technology by public enterprises in Tanzania - gives theoretical models of decision making behaviour; includes case studies based on the textile industry, sugar industry, an edible oil mill, detergent industry, printing ink factory, maize mill and shoe factory; outlines problems of state intervention, bureaucracy and industrial policy alternatives.

  15. Business and Industry for Continuous Learning.

    Science.gov (United States)

    Wiswell, Albert K.

    1990-01-01

    Witting and unwitting contributions to the learning community by business and industry include learning opportunities for employees and nonemployees, involvement in educational partnerships, corporate museums, trade shows and exhibitions, and support for the arts. Although the company intent may be public relations or marketing, making use of…

  16. A Hybrid Multiple Criteria Group Decision-Making Approach for Green Supplier Selection in the TFT-LCD Industry

    Directory of Open Access Journals (Sweden)

    Che-Wei Tsui

    2014-01-01

    Full Text Available The awareness of the need for environmental protection is increasing throughout the world. The focuses of green supplier selection are on considering environmental criteria and strengthening the competitiveness of the entire supply chain. The purpose of this study is to develop a green supplier selection procedure for the thin film transistor liquid crystal display (TFT-LCD industry using polarizer suppliers as an example. First, a decision framework for green supplier selection is developed based on literatures and the supplier audit forms provided by an anonymous flat panel display manufacturer in Taiwan. Then, a hybrid multiple criteria group decision-making (MCGDM method is proposed based on analytic hierarchy process (AHP, entropy, elimination and choice expressing the reality III (ELECTRE III, and the linear assignment method to assist the manufacturer in choosing among four polarizer suppliers. The final ranking results for green supplier selection and different opinions from each department are provided. An improvement report is suggested to enhance suppliers’ performance. For the evaluation procedure, most managers emphasize the importance of current capability and the capability of research and development. Furthermore, we found that the subsidiary supplier should improve quality control competence immediately to be considered as the potential candidate of primary supplier.

  17. Acoustic barriers obtained from industrial wastes.

    Science.gov (United States)

    Garcia-Valles, M; Avila, G; Martinez, S; Terradas, R; Nogués, J M

    2008-07-01

    Acoustic pollution is an environmental problem that is becoming increasingly more important in our society. Likewise, the accumulation of generated waste and the need for waste management are also becoming more and more pressing. In this study we describe a new material--called PROUSO--obtained from industrial wastes. PROUSO has a variety of commercial and engineering, as well as building, applications. The main raw materials used for this environmentally friendly material come from slag from the aluminium recycling process, dust from the marble industry, foundry sands, and recycled expanded polystyrene from recycled packaging. Some natural materials, such as plastic clays, are also used. To obtain PROUSO we used a conventional ceramic process, forming new mineral phases and incorporating polluted elements into the structure. Its physical properties make PROUSO an excellent acoustic and thermal insulation material. It absorbs 95% of the sound in the frequency band of the 500 Hz. Its compressive strength makes it ideal for use in ceramic wall building.

  18. Avaliação da presença de Staphylococcus aureus nos leitos do Centro de Terapia Intensiva do Hospital Escola da Faculdade de Medicina do Triângulo Mineiro, em relação à posição no colchão antes e após a limpeza Evaluation of presence of Staphylococcus aureus on the beds of Hospital Escola's Intensive Care Unit, concerning the position on the mattress, before and after cleaning

    Directory of Open Access Journals (Sweden)

    Guilhermo Justino Mundim

    2003-12-01

    Full Text Available Através de meios de cultura, foi pesquisada a posição de colônias de Staphylococcus aureus em colchões, visando avaliar a eficácia do procedimento de limpeza e desinfecção dos leitos do Hospital Escola da Faculdade de Medicina do Triângulo Mineiro (Uberaba. Foram analisadas amostras de 50 colchões no período de 22 de outubro de 2000 a 16 de janeiro de 2001. As amostras foram coletadas e semeadas, pela técnica de esgotamento, em dois meios de cultivo (ágar sangue e manitol com posterior realização de provas de catalase e coagulase . Na análise estatística, foram utilizados os testes não paramétricos Mann-Whitney, Kruswkal- Wallis e Wilcoxon Matched Pairs Test com nível de significância p 0,05. Os resultados apontam e alertam para falhas no procedimento de limpeza e desinfecção dos leitos hospitalares por nós estudados.By means of culture medium, it was researched the position of the colony of Staphylococcus aureus on the mattress, to evaluate the efficciuoness of the methods of cleaning and disinfection of the river bed in the Faculdade de Medicina do Triângulo Mineiro's School Hospital (Uberaba. It were evaluated fifty mattresses on the period of October 22th (2000 to January 16th (2001. The samples were collected and grown, the exhaustion techinique draining, on two different nutrient bases (blood agar and mannitol salt agar followed by catalase and coagulase tests. For the statistical analysis, were used non-parametrics tests Mann-Whitney, Kruskal-Wallis, Wilcoxon Matched Pairs Test with significance level p < 0,05 were used. Six hundred dishes of culture medium have been used. There was growing in 94 (15,6%, being 82 (87,2% before and 12 (12,8% after cleaning and disinfection. Concerning the position on the bed, the samples obtained from mannitol salt agar medium showed significant retention on the lower position of bed. The results alert to flaws in the procedure for cleaning and disinfection from the mattresses

  19. Understanding transferable supply chain lessons and practices to a "high-tech" industry using guidelines from a primary sector industry: a case study in the food industry supply chain.

    Science.gov (United States)

    Coronado Mondragon, Adrian E; Coronado Mondragon, Christian E; Coronado, Etienne S

    2015-01-01

    Flexibility and innovation at creating shapes, adapting processes, and modifying materials characterize composites materials, a "high-tech" industry. However, the absence of standard manufacturing processes and the selection of materials with defined properties hinder the configuration of the composites materials supply chain. An interesting alternative for a "high-tech" industry such as composite materials would be to review supply chain lessons and practices in "low-tech" industries such as food. The main motivation of this study is to identify lessons and practices that comprise innovations in the supply chain of a firm in a perceived "low-tech" industry that can be used to provide guidelines in the design of the supply chain of a "high-tech" industry, in this case composite materials. This work uses the case study/site visit with analogy methodology to collect data from a Spanish leading producer of fresh fruit juice which is sold in major European markets and makes use of a cold chain. The study highlights supply base management and visibility/traceability as two elements of the supply chain in a "low-tech" industry that can provide guidelines that can be used in the configuration of the supply chain of the composite materials industry.

  20. Handbook on Decision Making

    CERN Document Server

    Jain, Lakhmi C

    2010-01-01

    The present "Volume 1: Techniques and Applications" of the "Handbook on Decision Making" presents a useful collection of AI techniques, as well as other complementary methodologies, that are useful for the design and development of intelligent decision support systems. Application examples of how these intelligent decision support systems can be utilized to help tackle a variety of real-world problems in different domains, such as business, management, manufacturing, transportation and food industries, and biomedicine, are presented. The handbook includes twenty condensed c

  1. Radiotracer Generators for Industrial Applications

    International Nuclear Information System (INIS)

    2013-01-01

    Radiotracers have been widely used throughout industry to optimize processes, solve problems, improve product quality, save energy and reduce pollution. Their technical, economic and environmental benefits have been recognized by both the industrial and the environmental sectors. The most important radiotracer techniques have been transferred to many developing Member States through IAEA Technical Cooperation projects. However, in spite of their manifest benefits, radiotracer techniques continue to be underutilized, not only by developing countries but also by more industrialized nations. There are a number of factors that restrict the usage of the radioisotope techniques, but chief among them is the timely availability of suitable radiotracers. Ensuring timely availability of suitable radionuclides is a main hurdle to the use of radiotracer techniques in industry. For developing countries that do not possess radioisotope production facilities, the long time required for import of radionuclides not only completely rules out the use of short half-life nuclides, but also makes it impossible for the radioisotope applications teams to respond to problems of an urgent nature. Many possible radiotracer investigations are not being carried out in developing countries because of this problem. Even in industrialized countries, radionuclide supply is often a problem, as many of the former suppliers of industrial radionuclides have switched their production facilities to serve the more lucrative radiopharmaceuticals market. Obtaining continuity of supply of radionuclides with which to carry out extended studies in difficult-to-access locations, such as offshore oil platforms, is also a significant challenge. Making use of tracers from radionuclide generators can alleviate the difficulties associated with radioisotope supply. Two commercially available medical radionuclide generators, 99 Mo/ 99 mTc and 113 Sn/ 113 mIn, have been used for this purpose, but their use has been

  2. Global alcohol policy and the alcohol industry.

    Science.gov (United States)

    Anderson, Peter

    2009-05-01

    The WHO is preparing its global strategy on alcohol, and, in so doing, has been asked to consult with the alcohol industry on ways it could contribute in reducing the harm done by alcohol. This review asks which is more effective in reducing harm: the regulatory approaches that the industry does not favour; or the educational approaches that it does favour. The current literature overwhelmingly finds that regulatory approaches (including those that manage the price, availability, and marketing of alcohol) reduce the risk of and the experience of alcohol-related harm, whereas educational approaches (including school-based education and public education campaigns) do not, with industry-funded education actually increasing the risk of harm. The alcohol industry should not be involved in making alcohol policy. Its involvement in implementing policy should be restricted to its role as a producer, distributor, and marketer of alcohol. In particular, the alcohol industry should not be involved in educational programmes, as such involvement could actually lead to an increase in harm.

  3. New opportunities for biocatalysis: making pharmaceutical processes greener

    DEFF Research Database (Denmark)

    Woodley, John

    2008-01-01

    The pharmaceutical industry requires synthetic routes to be environmentally compatible as well as to fulfill the demands of process economics and product specification and to continually reduce development times. Biocatalysis has the potential to deliver 'greener' chemical syntheses, and in this ......The pharmaceutical industry requires synthetic routes to be environmentally compatible as well as to fulfill the demands of process economics and product specification and to continually reduce development times. Biocatalysis has the potential to deliver 'greener' chemical syntheses...... of biocatalysis for making pharmaceutical processes greener....

  4. COMPETITIVENESS OF THE INDONESIAN CONSTRUCTION INDUSTRY

    Directory of Open Access Journals (Sweden)

    Agung Budiwibowo

    2009-06-01

    Full Text Available Indonesia’s construction industry is important to the national economy. However, its competitiveness is considered low due to the lack of success of its development strategy and policy. A new approach known as the cluster approach is being used to make strategy and policy in order to develop a stronger more competitive industry . This paper discusses the layout of the Indonesian construction cluster and its competitiveness. The archival analysis research approach was used to identify the construction cluster. The analysis was based on the I/O tables of the years 1995 and 2000, which were published by the Indonesian Central Bureau of Statistics. The results suggest that the Indonesian construction cluster consists of the industries directly involved in construction as the core, with the other related and supporting industries as the balance. The anatomy of the Indonesian construction cluster permits structural changes to happen within it. These changes depend on policies that regulate the cluster’s constituents.

  5. Technology Trends and Opportunities for Construction Industry and Lifecycle Management

    OpenAIRE

    Janson, Vidar

    2017-01-01

    Master's thesis in for Offshore Technology: Industrial Asset Management The purpose of the report is to highlight methods that can make it easier for the construction industry and industry in general to benefit from new technology. The report is intended as a reference to technological solutions that along with some techniques, can streamline workflow for multiple tasks in planning, design, and operation and maintenance management. The problems focused on is how to: • Simplify the procu...

  6. Transformation of Bread Industry Structure by Consumer Tastes and Innovation

    OpenAIRE

    丸山, 泰広; 豊, 智行; 福田, 晋; 甲斐, 諭

    2003-01-01

    Bread industry is classfied two types of business. One type is Bread manufacturer which makes bread and sells them to retailer and supermarket. Another type is Bread self-making bakery which makes bread by themselves and directly sells them to consumer. Bread consumer tastes are freshness and diversification. Bread manufacturar copes with diversification by naking many items. Bread self-making bakery copes with freshness by directly providing consumer. But by a innovation a new group is organ...

  7. Green Plate-making Technology Based on Nanomaterials

    Institute of Scientific and Technical Information of China (English)

    SONG Yanlin

    2011-01-01

    @@ Movable type printing technology is one of the four great inventions of ancient China which played a significant role in passing down the history and civilization of human society.Today, with economic development and people's diverse needs for presswork, printing has penetrated into all spheres of life, and the printing industry has become one of the industries that have important impacts on China's national economy.Since China is now the third largest printing market in the world, the rapid development of this huge market calls for digital plate-making technologies for the sake of environmental protection.

  8. Making offshore industries greener: negotiating environmental policy in the Dutch oil and gas sector

    International Nuclear Information System (INIS)

    Hinssen, J.

    1994-01-01

    In this paper the negotiations between the Dutch Government and the oil and gas sector regarding environmental measures for the offshore industry are analysed. Dutch environmental policy is presently being developed via 'Target Group Management'. The instrument used in this approach is policy negotiations, resulting in covenants. By signing a covenant, both government and industry take responsibility for the development and implementation of a realistic environmental policy. Negotiating environmental policies, however, can be problematic. This relates to the delay in obtaining an integrated approach to environmental problems. It is not unlikely that, in the four years required for the negotiation process, a legally binding environmental law might also have been developed. It is concluded that the value of the covenant mainly depends on the goodwill of the parties involved. (Author)

  9. A research on service quality decision-making of Chinese communications industry based on quantum game

    Science.gov (United States)

    Zhang, Cuihua; Xing, Peng

    2015-08-01

    In recent years, Chinese service industry is developing rapidly. Compared with developed countries, service quality should be the bottleneck for Chinese service industry. On the background of three major telecommunications service providers in China, the functions of customer perceived utilities are established. With the goal of consumer's perceived utility maximization, the classic Nash equilibrium solution and quantum equilibrium solution are obtained. Then a numerical example is studied and the changing trend of service quality and customer perceived utility is further analyzed by the influence of the entanglement operator. Finally, it is proved that quantum game solution is better than Nash equilibrium solution.

  10. New challenges and opportunities for industrial biotechnology

    Directory of Open Access Journals (Sweden)

    Chen Guo-Qiang

    2012-08-01

    Full Text Available Abstract Industrial biotechnology has not developed as fast as expected due to some challenges including the emergences of alternative energy sources, especially shale gas, natural gas hydrate (or gas hydrate and sand oil et al. The weaknesses of microbial or enzymatic processes compared with the chemical processing also make industrial biotech products less competitive with the chemical ones. However, many opportunities are still there if industrial biotech processes can be as similar as the chemical ones. Taking advantages of the molecular biology and synthetic biology methods as well as changing process patterns, we can develop bioprocesses as competitive as chemical ones, these including the minimized cells, open and continuous fermentation processes et al.

  11. New challenges and opportunities for industrial biotechnology

    Science.gov (United States)

    2012-01-01

    Industrial biotechnology has not developed as fast as expected due to some challenges including the emergences of alternative energy sources, especially shale gas, natural gas hydrate (or gas hydrate) and sand oil et al. The weaknesses of microbial or enzymatic processes compared with the chemical processing also make industrial biotech products less competitive with the chemical ones. However, many opportunities are still there if industrial biotech processes can be as similar as the chemical ones. Taking advantages of the molecular biology and synthetic biology methods as well as changing process patterns, we can develop bioprocesses as competitive as chemical ones, these including the minimized cells, open and continuous fermentation processes et al. PMID:22905695

  12. New challenges and opportunities for industrial biotechnology.

    Science.gov (United States)

    Chen, Guo-Qiang

    2012-08-20

    Industrial biotechnology has not developed as fast as expected due to some challenges including the emergences of alternative energy sources, especially shale gas, natural gas hydrate (or gas hydrate) and sand oil et al. The weaknesses of microbial or enzymatic processes compared with the chemical processing also make industrial biotech products less competitive with the chemical ones. However, many opportunities are still there if industrial biotech processes can be as similar as the chemical ones. Taking advantages of the molecular biology and synthetic biology methods as well as changing process patterns, we can develop bioprocesses as competitive as chemical ones, these including the minimized cells, open and continuous fermentation processes et al.

  13. Essays in industrial organization and management strategy

    NARCIS (Netherlands)

    de Bijl, P.W.J.

    1996-01-01

    This thesis contains five essays in the theory of industrial organization and management strategy. An introduction makes the main ideas accessible to non-specialists by presenting the essays as fictitious cases. The first essay investigates strategic disclosure of verifiable information. The

  14. Pressure RElieving Support SUrfaces: a Randomised Evaluation 2 (PRESSURE 2): study protocol for a randomised controlled trial.

    Science.gov (United States)

    Brown, Sarah; Smith, Isabelle L; Brown, Julia M; Hulme, Claire; McGinnis, Elizabeth; Stubbs, Nikki; Nelson, E Andrea; Muir, Delia; Rutherford, Claudia; Walker, Kay; Henderson, Valerie; Wilson, Lyn; Gilberts, Rachael; Collier, Howard; Fernandez, Catherine; Hartley, Suzanne; Bhogal, Moninder; Coleman, Susanne; Nixon, Jane E

    2016-12-20

    Pressure ulcers represent a major burden to patients, carers and the healthcare system, affecting approximately 1 in 17 hospital and 1 in 20 community patients. They impact greatly on an individual's functional status and health-related quality of life. The mainstay of pressure ulcer prevention practice is the provision of pressure redistribution support surfaces and patient repositioning. The aim of the PRESSURE 2 study is to compare the two main mattress types utilised within the NHS: high-specification foam and alternating pressure mattresses, in the prevention of pressure ulcers. PRESSURE 2 is a multicentre, open-label, randomised, double triangular, group sequential, parallel group trial. A maximum of 2954 'high-risk' patients with evidence of acute illness will be randomised on a 1:1 basis to receive either a high-specification foam mattress or alternating-pressure mattress in conjunction with an electric profiling bed frame. The primary objective of the trial is to compare mattresses in terms of the time to developing a new Category 2 or above pressure ulcer by 30 days post end of treatment phase. Secondary endpoints include time to developing new Category 1 and 3 or above pressure ulcers, time to healing of pre-existing Category 2 pressure ulcers, health-related quality of life, cost-effectiveness, incidence of mattress change and safety. Validation objectives are to determine the responsiveness of the Pressure Ulcer Quality of Life-Prevention instrument and the feasibility of having a blinded endpoint assessment using photography. The trial will have a maximum of three planned analyses with unequally spaced reviews at event-driven coherent cut-points. The futility boundaries are constructed as non-binding to allow a decision for stopping early to be overruled by the Data Monitoring and Ethics Committee. The double triangular, group sequential design of the PRESSURE 2 trial will provide an efficient design through the possibility of early stopping for

  15. Engineering models and methods for industrial cell control

    DEFF Research Database (Denmark)

    Lynggaard, Hans Jørgen Birk; Alting, Leo

    1997-01-01

    This paper is concerned with the engineering, i.e. the designing and making, of industrial cell control systems. The focus is on automated robot welding cells in the shipbuilding industry. The industrial research project defines models and methods for design and implemen-tation of computer based...... SHIPYARD.It is concluded that cell control technology provides for increased performance in production systems, and that the Cell Control Engineering concept reduces the effort for providing and operating high quality and high functionality cell control solutions for the industry....... control and monitor-ing systems for production cells. The project participants are The Danish Academy of Technical Sciences, the Institute of Manufacturing Engineering at the Technical University of Denmark and ODENSE STEEL SHIPYARD Ltd.The manufacturing environment and the current practice...

  16. Towards the design of a zero effluent facility in the pharmaceutical industry

    CSIR Research Space (South Africa)

    Gouws, JF

    2007-05-01

    Full Text Available . The pharmaceutical production industry has some unique characteristics that make it possible to reach the goal of zero effluent. In such industries wastewater is generally produced from washing out of mixing vessels. The wastewater thus contains valuable product...

  17. Process of making porous ceramic materials with controlled porosity

    Science.gov (United States)

    Anderson, Marc A.; Ku, Qunyin

    1993-01-01

    A method of making metal oxide ceramic material is disclosed by which the porosity of the resulting material can be selectively controlled by manipulating the sol used to make the material. The method can be used to make a variety of metal oxide ceramic bodies, including membranes, but also pellets, plugs or other bodies. It has also been found that viscous sol materials can readily be shaped by extrusion into shapes typical of catalytic or adsorbent bodies used in industry, to facilitate the application of such materials for catalytic and adsorbent applications.

  18. Nuclear regulatory decision making

    International Nuclear Information System (INIS)

    2005-01-01

    The fundamental objective of all nuclear safety regulatory bodies is to ensure that nuclear utilities operate their plants at all times in an acceptably safe manner. In meeting this objective, the regulatory body should strive to ensure that its regulatory decisions are technically sound, consistent from case to case, and timely. In addition, the regulator must be aware that its decisions and the circumstances surrounding those decisions can affect how its stakeholders, such as government policy makers, the industry it regulates, and the public, view it as an effective and credible regulator. In order to maintain the confidence of those stakeholders, the regulator should make sure that its decisions are transparent, have a clear basis in law and regulations, and are seen by impartial observers to be fair to all parties. Based on the work of a Nuclear Energy Agency (NEA) expert group, this report discusses some of the basic principles and criteria that a regulatory body should consider in making decisions and describes the elements of an integrated framework for regulatory decision making. (author)

  19. Modelling energy demand of Croatian industry sector

    DEFF Research Database (Denmark)

    Medić, Zlatko Bačelić; Pukšec, Tomislav; Mathiesen, Brian Vad

    2014-01-01

    Industry represents one of the most interesting sectors when analysing Croatian final energy demand. Croatian industry represents 20% of nation's GDP and employs 25% of total labour force making it a significant subject for the economy. Today, with around 60 PJ of final energy demand...... it is the third most energy intensive sector in Croatia after transport and households. Implementing mechanisms that would lead to improvements in energy efficiency in this sector seems relevant. Through this paper, long-term energy demand projections for Croatian industry will be shown. The central point...... for development of the model will be parameters influencing the industry in Croatia. Energy demand predictions in this paper are based upon bottom-up approach model. IED model produces results which can be compared to Croatian National Energy Strategy. One of the conclusions shown in this paper is significant...

  20. 16 CFR 1633.2 - Definitions.

    Science.gov (United States)

    2010-01-01

    ... terms, for definitions of these items. (b) Foundation means a ticking covered structure used to support a mattress or sleep surface. The structure may include constructed frames, foam, box springs, or... taped border edge of a mattress or foundation that joins the top and/or bottom with the side panels. (h...

  1. An Empirical Study on Marketing Effectiveness Evaluation of Green Food Industry

    OpenAIRE

    Yazhou Xiong; Qianxia Lu; Rui Wang

    2015-01-01

    This study aims to evaluate the marketing effectiveness of green food industry in Hubei Province via fuzzy comprehensive evaluation. Based on the cost basis of analysis of present situation, an evaluation system of marketing effectiveness evaluation on green food industry is established from three aspects, including the industry factor, policy factor and marketing performance factor. And fuzzy comprehensive evaluation method is used to make the quantitative research, analyze the major obstacl...

  2. The Emerging Global Education Industry: Analysing Market-Making in Education through Market Sociology

    Science.gov (United States)

    Verger, Antoni; Steiner-Khamsi, Gita; Lubienski, Christopher

    2017-01-01

    This paper addresses the rise and consequences of an emerging global education industry (GEI), which represents new forms of private, for profit involvement in education across the globe. The paper explores the emergence within the GEI of new and varied, largely transnational, markets in education by focusing on three examples of the GEI at work.…

  3. Biomass energy conversion workshop for industrial executives

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-01-01

    The rising costs of energy and the risks of uncertain energy supplies are increasingly familiar problems in industry. Bottom line profits and even the simple ability to operate can be affected by spiralling energy costs. An often overlooked alternative is the potential to turn industrial waste or residue into an energy source. On April 9 and 10, 1979, in Claremont, California, the Solar Energy Research Institute (SERI), the California Energy Commission (CEC), and the Western Solar Utilization Network (WSUN) held a workshop which provided industrial managers with current information on using residues and wastes as industrial energy sources. Successful industrial experiences were described by managers from the food processing and forest product industries, and direct combustion and low-Btu gasification equipment was described in detail. These speakers' presentations are contained in this document. Some major conclusions of the conference were: numerous current industrial applications of wastes and residues as fuels are economic and reliable; off-the-shelf technologies exist for converting biomass wastes and residues to energy; a variety of financial (tax credits) and institutional (PUC rate structures) incentives can help make these waste-to-energy projects more attractive to industry. However, many of these incentives are still being developed and their precise impact must be evaluated on a case-by-case basis.

  4. The Power of Stars Across Industries

    DEFF Research Database (Denmark)

    Hofmann, Julian; Clement, Michel; Hennig-Thurau, Thorsten

    Stars as ‘human brands’ help consumers to assess the uncertain quality of experiential products and provide an important risk-reducing function. Nevertheless, managers of (fully integrated) media companies should be aware of potentially differences in the impact of stars across industries when...... making budget allocation decisions or deciding on the appropriate remuneration of stars. Based on a unique dataset the authors compare, for the first time, the impact of stars on product success across movies, books, and musical recordings. The results indicate significantly positive effects of star...... power in all three media industries but reveal substantial differences regarding the effect sizes....

  5. Understanding Transferable Supply Chain Lessons and Practices to a “High-Tech” Industry Using Guidelines from a Primary Sector Industry: A Case Study in the Food Industry Supply Chain

    Science.gov (United States)

    Coronado Mondragon, Adrian E.; Coronado, Etienne S.

    2015-01-01

    Flexibility and innovation at creating shapes, adapting processes, and modifying materials characterize composites materials, a “high-tech” industry. However, the absence of standard manufacturing processes and the selection of materials with defined properties hinder the configuration of the composites materials supply chain. An interesting alternative for a “high-tech” industry such as composite materials would be to review supply chain lessons and practices in “low-tech” industries such as food. The main motivation of this study is to identify lessons and practices that comprise innovations in the supply chain of a firm in a perceived “low-tech” industry that can be used to provide guidelines in the design of the supply chain of a “high-tech” industry, in this case composite materials. This work uses the case study/site visit with analogy methodology to collect data from a Spanish leading producer of fresh fruit juice which is sold in major European markets and makes use of a cold chain. The study highlights supply base management and visibility/traceability as two elements of the supply chain in a “low-tech” industry that can provide guidelines that can be used in the configuration of the supply chain of the composite materials industry. PMID:25821848

  6. Applications of building information model (BIM) in Malaysian construction industry

    Science.gov (United States)

    Tahir, M. M.; Haron, N. A.; Alias, A. H.; Al-Jumaa, A. T.; Muhammad, I. B.; Harun, A. N.

    2017-12-01

    Since the introduction of BIM in Malaysia in 2009, the technology adoption rate is slow when compared to other countries of the world. Most of the construction companies in Malaysia have an insight on the BIM concept but are yet to implement it in the management of their construction projects. By the year 2020, the Malaysian government will make BIM mandatory, this makes it important to carry out research on the possible applications of the technology. A qualitative method of enquiry was used for this study in Klang Valley using semistructured interview. The responses received were analysed using Principal component analysis (PCA). The result of the analysis showed that “quantity take-off and estimation”, “clash detection and coordination”, “integration and collaboration of stakeholders”, and “design and visualisation” as the main applications of BIM in Malaysia presently. The implication of this findings is that the Malaysian construction industry productivity is likely to increase to meet the demand of the population through the implementations of BIM. More also, BIM technology is regarded as the future of construction industry, which makes it very important for the industry.

  7. Numerical Relativity as preparation for Industrial Data Science, a personal perspective

    Science.gov (United States)

    Smith, Kenneth

    2014-03-01

    Much of the conversation in commercial enterprises these days revolves around industry buzz words such as Big Data, Data Science, and being Data Driven. Beyond the hype surrounding these terms, there is a real, continuously growing movement for organizations to make better use of the data assets they have to inform decisions, strategy, and policy. This push is not unique to the commercial sector; governmental and academic organizations are also embracing such initiatives. The skills required to staff a Data Science project typically come from a number of disciplines, ranging from computer science, statistics, modeling and simulation, to information technology, but the emerging wisdom in the community is that the rigor and discipline of a scientific background often makes for the best data scientists. In this talk, I will offer a personal perspective on making the transition from a career in computational physics (specifically Numerical Relativity) to a career in industry, where I have focused on helping organizations make more informed decisions through better access and analysis of data at their disposal. I will identify the skills and training that carry over from a background in physics, discuss the gaps in that preparation, hypothesize as to where this industry is headed, and offer a frank look at a life outside of academia.

  8. Variabilidade genética em trigos brasileiros a partir de caracteres componentes da qualidade industrial e produção de grãos Genetic variability for bread making quality and grain yield among Brazilian wheat genotypes

    Directory of Open Access Journals (Sweden)

    Douglas André Mallmann Schmidt

    2009-01-01

    Full Text Available O melhoramento genético para a qualidade industrial do trigo pode representar uma oportunidade de agregar valor de mercado aos produtos agrícolas, sendo o trigo um dos cereais com maior associação entre a qualidade intrínseca e a remuneração ao agricultor. O objetivo do trabalho foi o de determinar a variabilidade genética a partir de caracteres indicativos da qualidade industrial e o rendimento de grãos, e estimar o grau de associação entre estes caracteres em 22 genótipos de trigo. O experimento foi desenvolvido em área experimental pertencente à Universidade Federal de Pelotas, Capão do Leão (RS. Os resultados indicaram a provável existência de variabilidade genética para os caracteres em estudo, a qual pode auxiliar pesquisadores na escolha de genitores. Cruzamentos artificiais envolvendo os genótipos BRS 208, Rubi e Safira podem ser os mais promissores no intuito de incrementar o ganho genético, tanto para a qualidade industrial quanto para a produtividade de grãos. O rendimento de grãos manifestou correlação negativa com o conteúdo de proteína da farinha revelando que a superioridade genotípica para o rendimento de grãos pode afetar negativamente a proporção protéica. Entretanto, o conteúdo de proteína não evidenciou associação significativa com a força de glúten (indicador da qualidade industrial, revelando que a concentração de proteína da farinha não foi eficiente para predizer a qualidade industrial. Este resultado sugere a possibilidade de obtenção de genótipos superiores para o rendimento de grãos sem comprometer a qualidade industrial.The breeding for wheat bread making quality represents a great opportunity to incorporate commercial value to agricultural products. Wheat has one of the best relationship between end product quality and farmer earnings. Genetic variability among 22 different genotypes based on bread making quality traits and grain yield and the degree of their association

  9. Personnel decisions: cost benefits and opportunities for the energy industry

    Energy Technology Data Exchange (ETDEWEB)

    Janz, T J

    1982-09-01

    This article reviews current practice in personnel decision making in the energy industry, outlining the conditions under which it developed. Changes in today's environment are noted and the utility equation is introduced as an aid to understanding the dollar impacts of these changes. Recent developments that make it possible to tally up the dollar benefits of alternative recruitment and selection programs are explained. Results of utility analyses for the job of roughneck on an oil rig, clerk-typist and assistant buyer are presented. The discussion points to human resource investments likely to have high net benefits and favorable return on investment for the energy industry.

  10. The industrial point of view

    International Nuclear Information System (INIS)

    Rozenholc, M.

    1984-01-01

    After a brief note on the successive designs of breeder reactors in France and in the world, this article analyzes the industrial experience acquired during the construction of the nuclear boiler Super Phenix of the power station at Creys-Malville. This experience, added to the remarkable continuity of the French programm, puts the industry in a position to approach the following phase of the deployment of breeder reactors. The international collaboration which has already been widely applied in the case of Creys-Malville must be continued. The common efforts will thus make it possible at less cost to set up this source of energy which is not dependent on natural ressources [fr

  11. Legislative Committee Simulation: Regulation in the Automobile Industry.

    Science.gov (United States)

    Hoffman, Alan J.; And Others

    1983-01-01

    Examined are ways to overcome obstacles which often prevent creative teaching of legislative decision-making processes to high school students. A simulation dealing with regulation in the automobile industry is used for illustrative purposes. (RM)

  12. Problems of power-heat-coupling in industry

    Energy Technology Data Exchange (ETDEWEB)

    1977-03-01

    The coupled heat and electric power supply from counter-pressure and partly also from extraction-condensing plants theoretically offers the best possibilities for saving energy in comparison to other measures which reduce the primary energy employed at equal useful energy. A basic requirement for the use of this principle of power-heat coupling is a somewhat simultaneous need of heat and electrical energy as well as a relatively short distance between production point and consumption point, since the transfer ability of the heat is limited due to the considerable cost of the transportation system. Numerous industrial enterprises offer favorable conditions for the use of power-heat coupling. Because of the existing legal and contract rights restraints, the incentive for a free development of industrial power-heat coupling with the aim of saving energy is strongly weakened. Therefore a new order to road rights is nececessary, which would make possible the construction and operation of common plants for several industrial operations and which would insure the right to lay industrial energy lines in public roads where reasonably possible. It has been proven necessary to make it the duty of the cartel authorities to orient their examinations of price regulations for auxiliary and reserve electric power supply solely on the objective electricity economy facts, but not on so-called advantageous points of view. Ultimately the regulation for common use of the utilities own piping system for the purpose of saving and piping free energy and free power from its own plants can be reasonably necessary in the utilities realm, if free agreements between the utility and the industry are not enough in this question.

  13. 16 CFR 1633.6 - Quality assurance requirements.

    Science.gov (United States)

    2010-01-01

    ... that mattress sets manufactured for sale are the same as the qualified and/or confirmed prototype on... are the same as those used in the prototype on which they are based; (2) Designation of a production lot that is represented by the prototype; and (3) Inspection of mattress sets produced for sale...

  14. The nuclear fuel cycle industry. World situation: the place of the French industry

    International Nuclear Information System (INIS)

    Sornein, J.

    1978-01-01

    The decision taken the day following the end of the second world war to create a French industry for the nuclear fuel cycle, the speed and dimension of its development from 1946 to 1966, the strengthening of its acquired knowledge during the following five years, lastly, the fact that, since 1972, it was able to make great strides, will have been in short the fruit of the remarkable continuity of an unfailing political will. Consequently it was possible beyond doubt, as soon as the ineluctable consequences of the oil crisis were evaluated, to give the French nuclear fuel cycle industry the new objectives which will succeed in granting it a foremost dimension on the international scale. In the three branches constituting the base of this industry (natural, enrichment, reprocessing), all these objectives will be reached by 1985. Their realization will permit our country to cover, in all security, not only its domestic needs but also to pursue a policy to sell materials and services for export at competitive prices [fr

  15. Integrating strategic environmental assessment with industry planning: a case study of the Pasquai-Porcupine forest management plan, Saskatchewan, Canada.

    Science.gov (United States)

    Noble, Bram F

    2004-03-01

    Strategic environmental assessment (SEA) is gaining widespread recognition as a tool for integrating environmental considerations in policy, plan, and program development and decision-making. Notwithstanding the potential of SEA to improve higher-order decision processes, there has been very little attention given to integrating SEA with industry planning practices. As a result, the benefits of SEA have yet to be fully realized among industrial proponents. That said, SEA practice is ongoing, albeit informally and often under a different label, and is proving to be a valuable tool for industry planning and decision-making. Based on a case study of the Pasquai-Porcupine forest management plan in Saskatchewan, Canada, this paper illustrates how an integrated approach to SEA can contribute to industry environmental decision-making and can enhance the quality and deliverability of industry plans.

  16. Industrial Production and Professional Application of Manufactured Nanomaterials-Enabled End Products in Dutch Industries: Potential for Exposure

    NARCIS (Netherlands)

    Bekker, C.; Brouwer, D.H.; Tielemans, E.; Pronk, A.

    2013-01-01

    Background: In order to make full use of the opportunities while responsibly managing the risks of working with manufactured nanomaterials (MNM), we need to gain insight into the potential level of exposure to MNM in the industry. Therefore, the goal of this study was to obtain an overview of the

  17. Preliminary Design of Industrial Symbiosis of Smes Using Material Flow Cost Accounting (MFCA) Method

    Science.gov (United States)

    Astuti, Rahayu Siwi Dwi; Astuti, Arieyanti Dwi; Hadiyanto

    2018-02-01

    Industrial symbiosis is a collaboration of several industries to share their necessities such material, energy, technology as well as waste management. As a part of industrial ecology, in principle, this system attempts to emulate ecosystem where waste of an organism is being used by another organism, therefore there is no waste in the nature. This system becomes an effort to optimize resources (material and energy) as well as minimize waste. Considerable, in a symbiosis incure material and energy flows among industries. Material and energy in an industry are known as cost carriers, thus flow analysis in this system can be conducted in perspective of material, energy and cost, or called as material flow cost accounting (MFCA) that is an economic and ecological appraisal approach. Previous researches shown that MFCA implementation could be used to evaluate an industry's environmental-related efficiency as well as in planning, business control and decision making. Moreover, the MFCA has been extended to assess environmental performance of SMEs Cluster or industrial symbiosis in SMEs Cluster, even to make preliminary design of an industrial symbiosis base on a major industry. This paper describes the use of MFCA to asses performance of SMEs industrial symbiosis and to improve the performance.

  18. Management of industrial sites and areas contaminated by radionuclides in France

    International Nuclear Information System (INIS)

    Oudiz, A.; Rousseau, D.

    2001-01-01

    The presentation involves two parts making mention on the one hand on the industrial sites management and on the other hand on contaminated areas management. In a third part, are considered the analogies and the differences susceptible of appearing in the management modes of industrial sites and areas. (N.C.)

  19. Energy conservation in the primary aluminum and chlor-alkali industries

    Energy Technology Data Exchange (ETDEWEB)

    1980-10-01

    The primary aluminum and chlor-alkali industries together use nearly 13% of the electrical energy consumed by US industry. As part of its mission to promote energy conservation in basic US industries, the DOE surveys the present technological status of the major electrochemical industries and evaluates promising technological innovations that may lead to reduced energy requirements. This study provides technical and economic analyses in support of a government program of research and development in advanced electrolytic technology. This program is intended to supplement the development efforts directed toward energy savings by private industry. Sections II and III of this report cover aluminum and chlorine production processes only, since these two industries represent over 90% of the electrical energy requirements of all electrolytic industries in the United States. Section IV examines barriers to accelerated research and development by the electrolytic industries, and makes suggestions for government actions to overcome these barriers.

  20. Empirical Studies Development Of Creative Industry Its Contribution To Make-Up Of Product Orientation Exporting In Denpasar-Bali

    Science.gov (United States)

    Suryathi, W.; Gede, I. G. K.

    2018-01-01

    The puIDRose of this study are : 1) to study the model of development of creative industries which export-oriented in Denpasar 2) to examine the main problems and constraints faced by creative industries 3) to know the increasing of product export in Denpasar.The number of samples are 15 creatives industries such as sub-sector of handicraft, fashion and culinary. Sampling technique used cluster and puIDRosive sampling. Data collection by interview, observation, literature study and questioner. Data analysis using qualitative and quantitative description. The results of this study explain: The model development of creative industry in Denpasar City basically consist of three phases that is : development input, development process and development output. The problems and business constraints in creative industries about skill and salary of human resources, capital of financial, promotion of marketing, raw material of resources, technology and modern administration of production. From the product export showed that woods were hight one of crafting sub sector, textiles were hight one of fashion sub sector, tuna fish were hight one of culinary sub sector.

  1. The changing structure of the international commercial nuclear power reactor industry

    International Nuclear Information System (INIS)

    Forsberg, C.W.; Hill, L.J.; Reich, W.J.; Rowan, W.J.

    1992-12-01

    The objective of this report is to provide an understanding of the international commercial nuclear power industry today and how the industry is evolving. This industry includes reactor vendors, product lines, and utility customers. The evolving structure of the international nuclear power reactor industry implies different organizations making decisions within the nuclear power industry, different outside constraints on those decisions, and different priorities than with the previous structure. At the same time, cultural factors, technical constraints, and historical business relationships allow for an understanding of the organization of the industry, what is likely, and what is unlikely. With such a frame of reference, current trends and future directions can be more readily understood

  2. the role of industry in micronutrient intervention programmes

    African Journals Online (AJOL)

    food industry, the media, consumer groups, and donor c· agencies, all of which must ... programmes and make them self-supporting and sustainable. The following ... Development of micronutrient product forms which are suitable for food ...

  3. Values in the electric power industry

    Energy Technology Data Exchange (ETDEWEB)

    Sayre, K. (ed.)

    1977-01-01

    A basic conclusion established by the seven essays presented is that nowhere within the complex decision-making process of the electric power industry is there any provision for systematically considering the curtailment of consumption as a serious alternative to continued expansion of power production. Six recommendations are summarized for concrete steps toward remedying this deficiency as a result of examining the essays. Continued expansion of power generation could result in desirable consequences of economic growth, jobs, ready transportation, and many consumer conveniences; undesirable consequences are: increasing air and water pollution, further depletion of nonrenewable resources, and increased dependence on foreign sources of energy. The papers are: A Cybernetic Analysis of Certain Energy Consumption Patterns, by Kenneth Sayre; Social and Environmental Value in Power Plant Licensing: A Study in the Regulation of Nuclear Power by Vaughn McKim; Legal and Economic Aspects of the Electric Utility's ''Mandate to Serve'', by Charles Murdock; Economies of Scale in the Electric Power Industry, by Kenneth Jameson; Dynamics of Growth in the U.S. Electric Power Industry, by Ellen Maher; Utilitarianism and Cost-Benefit Analysis: An Essay on the Relevance of Moral Philosophy to Bureaucratic Theory, by Alasdair MacIntyre; and An Ethical Analysis of Power Company Decision-Making, by Kenneth Goodpaster and Kenneth Sayre. (MCW)

  4. A rapid assessment of bonded labour in the carpet industry of Pakistan

    OpenAIRE

    Mueen Nasir, Zafar

    2004-01-01

    Based on field work in four provinces of Pakistan. Examines labour arrangements and working conditions in the carpet weaving industry and identifies the main characteristics of employers and workers. Investigates the prevalence of debt bondage in the industry and makes recommendations for action and research.

  5. Revitalizing The Performance Of Garment Industry In Ethiopia Through Multi Dimensional Performance Measurement Practices

    OpenAIRE

    Rao, Dr. K. Rama Mohana; Tesfahunegn, Simon Zekarias

    2015-01-01

    Products of garment industry are one of the basic needs of mankind. Garment industry is making significant contribution to many national economies especially in the developing world. Many countries are exploiting this industry for reasons of economic growth. The high amount of labor involved in textile productions has caused textile and garment industries to seek locations with lower wage employees for reduced production costs. Thus, days are gone when garment industry was concentrated in the...

  6. Natural gas industry at the 2020 prospects

    International Nuclear Information System (INIS)

    Chabrelie, M.F.

    2006-01-01

    Natural gas was for a long time reserved to the most noble uses in the industry. However, natural gas, which get a priori no captive market, has progressively imposed itself in all possible energy uses. The gas resources and abundant enough to represent the main contribution of the energy industry of the 21 century. With intrinsic qualities which make it an energy less polluting than the other fossil fuels, natural gas is the commercial energy source with the highest potential growth in the energy status of the future. (J.S.)

  7. Use of visualization technology to improve decision-making performance in nuclear power plants

    International Nuclear Information System (INIS)

    Hanes, Lewis F.; Naser, Joseph

    2005-01-01

    This paper contains a description of modern 2.5-D and 3-D visualization technology that may be applied to improve human situation awareness and decision-making in nuclear power plants. Visualization technology is being applied widely and successfully in several industries. Examples are presented of successful applications in the military, aviation, medical, entertainment, and nuclear industries. Additional opportunities are identified in the nuclear industry that may benefit from improved visualization

  8. Measuring industry productivity and cross-country convergence

    NARCIS (Netherlands)

    Inklaar, Robert; Diewert, W. Erwin

    2016-01-01

    This paper introduces a new method for simultaneously comparing industry productivity across countries and over time. The new method is similar to the method for making multilateral comparisons of Caves, Christensen and Diewert (1982b) but their method can only compare gross outputs across

  9. Work Integrated Learning Competencies: Industrial Supervisors' Perspectives

    Science.gov (United States)

    Makhathini, Thobeka Pearl

    2016-01-01

    Research on student-learning outcomes indicates that university graduates do not possess relevant skills required by the industry such as leadership, emotional intelligence, problem solving, communication, decision-making skills and the ability to function in a multicultural environment. Currently, engineering graduates are expected to perform…

  10. Strengthening the relationship between industry and academia

    International Nuclear Information System (INIS)

    Jackson, K.J.; Medford, M.O.

    1991-01-01

    Both industry and academia recognize that there are potential benefits in developing a partnership. Interaction between industry and academia is necessary if students are to be given the skills that are most critical to industry. These more appropriately educated students will then be able to make a greater and more immediate contribution once in the work force. This interaction can continue throughout the employee's career by providing opportunities for lifelong learning through training - both technical training to prevent obsolescence and training to broaden or add to employee skills (e.g., management or quality training). Local universities and colleges in the Tennessee River Valley provide help with curriculum development and provide expertise and the latest information and techniques that are lacking within the Tennessee Valley Authority (TVA) for training and broadening employees. Two examples are provided of current programs designed to address industrial demands for education

  11. Competitiveness of Halal Industry in Maghreb Countries

    Directory of Open Access Journals (Sweden)

    Mohammed Rizki Moi

    2016-06-01

    Full Text Available To ensure that the countries produce halal products in order to remain in the international market, then they must make sure that they remain competitive in the market. Therefore, this study was to measure the competitiveness of the halal industry in the Maghreb countries which consist of five countries, namely Algeria, Libya, Mauritania, Morocco and Tunisia. The methodology of this study was using halal market share in the country and revealed comparative advantage (RCA. The study found that Mauritania is the most competitive country for halal industry because of it has the highest RCA value and followed by Morocco and Tunisia. While the countries that have lower competitiveness are Algeria and Libya. Therefore, the government and industry should plays a role to improve the competitiveness of their national halal industry and to ensure they remain competitive in the international halal market.

  12. The Examination of Brand Switching Behaviour in Cosmetic Industry

    OpenAIRE

    Cheng, I-Jiun

    2007-01-01

    Cometic industry is a lucrative business that progressively attracts more attentions from marketing research. The highly competitive environment in the cosmetic industry makes it a valuable area to study consumer behaviours. Brand switching behaviour is one of the most important consumer behaviours which is significant for the management to sustain competitive advantages in the global market. In this research, the relationship between brand switching behaviour and factors influencing such beh...

  13. Bioremediation of industrial waste through mushroom cultivation.

    Science.gov (United States)

    Kulshreshtha, Shweta; Mathur, Nupur; Bhatnagar, Pradeep; Jain, B L

    2010-07-01

    Handmade paper and cardboard industries are involved in processing of cellulosic and ligno-cellulosic substances for making paper by hand or simple machinery. In the present study solid sludge and effluent of both cardboard and handmade paper industries was collected for developing a mushroom cultivation technique to achieve zero waste discharges. Findings of present research work reveals that when 50% paper industries waste is used by mixing with 50% (w/w) wheat straw, significant increase (96.38%) in biological efficiency over control of wheat straw was observed. Further, cultivated basidiocarps showed normal morphology of stipe and pileus. Cross section of lamellae did not show any abnormality in the attachment of basidiospores, hymenal trama and basidium. No toxicity was found when fruiting bodies were tested chemically.

  14. Early prevention of pressure ulcers among elderly patients admitted through emergency departments: a cost-effectiveness analysis.

    Science.gov (United States)

    Pham, Ba'; Teague, Laura; Mahoney, James; Goodman, Laurie; Paulden, Mike; Poss, Jeff; Li, Jianli; Ieraci, Luciano; Carcone, Steven; Krahn, Murray

    2011-11-01

    Every year, approximately 6.2 million hospital admissions through emergency departments (ED) involve elderly patients who are at risk of developing pressure ulcers. We evaluated the cost-effectiveness of pressure-redistribution foam mattresses on ED stretchers and beds for early prevention of pressure ulcers in elderly admitted ED patients. Using a Markov model, we evaluated the incremental effectiveness (quality-adjusted life-days) and incremental cost (hospital and home care costs) between early prevention and current practice (with standard hospital mattresses) from a health care payer perspective during a 1-year time horizon. The projected incidence of ED-acquired pressure ulcers was 1.90% with current practice and 1.48% with early prevention, corresponding to a number needed to treat of 238 patients. The average upgrading cost from standard to pressure-redistribution mattresses was $0.30 per patient. Compared with current practice, early prevention was more effective, with 0.0015 quality-adjusted life-days gained, and less costly, with a mean cost saving of $32 per patient. If decisionmakers are willing to pay $50,000 per quality-adjusted life-year gained, early prevention was cost-effective even for short ED stay (ie, 1 hour), low hospital-acquired pressure ulcer risk (1% prevalence), and high unit price of pressure-redistribution mattresses ($3,775). Taking input uncertainty into account, early prevention was 81% likely to be cost-effective. Expected value-of-information estimates supported additional randomized controlled trials of pressure-redistribution mattresses to eliminate the remaining decision uncertainty. The economic evidence supports early prevention with pressure-redistribution foam mattresses in the ED. Early prevention is likely to improve health for elderly patients and save hospital costs. Copyright © 2011 American College of Emergency Physicians. Published by Mosby, Inc. All rights reserved.

  15. Environmental and mucosal microbiota and their role in childhood asthma.

    Science.gov (United States)

    Birzele, L T; Depner, M; Ege, M J; Engel, M; Kublik, S; Bernau, C; Loss, G J; Genuneit, J; Horak, E; Schloter, M; Braun-Fahrländer, C; Danielewicz, H; Heederik, D; von Mutius, E; Legatzki, A

    2017-01-01

    High microbial diversity in the environment has been associated with lower asthma risk, particularly in children exposed to farming. It remains unclear whether this effect operates through an altered microbiome of the mucosal surfaces of the airways. DNA from mattress dust and nasal samples of 86 school age children was analyzed by 454 pyrosequencing of the 16S rRNA gene fragments. Based on operational taxonomic units (OTUs), bacterial diversity and composition were related to farm exposure and asthma status. Farm exposure was positively associated with bacterial diversity in mattress dust samples as determined by richness (P = 8.1 × 10 -6 ) and Shannon index (P = 1.3 × 10 -5 ). Despite considerable agreement of richness between mattress and nasal samples, the association of richness with farming in nasal samples was restricted to a high gradient of farm exposure, that is, exposure to cows and straw vs no exposure at all. In mattress dust, the genera Clostridium, Facklamia, an unclassified genus within the family of Ruminococcaceae, and six OTUs were positively associated with farming. Asthma was inversely associated with richness [aOR = 0.48 (0.22-1.02)] and Shannon index [aOR = 0.41 (0.21-0.83)] in mattress dust and to a lower extent in nasal samples [richness aOR 0.63 = (0.38-1.06), Shannon index aOR = 0.66 (0.39-1.12)]. The stronger inverse association of asthma with bacterial diversity in mattress dust as compared to nasal samples suggests microbial involvement beyond mere colonization of the upper airways. Whether inhalation of metabolites of environmental bacteria contributes to this phenomenon should be the focus of future research. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  16. Utility systems operation: Optimisation-based decision making

    International Nuclear Information System (INIS)

    Velasco-Garcia, Patricia; Varbanov, Petar Sabev; Arellano-Garcia, Harvey; Wozny, Guenter

    2011-01-01

    Utility systems provide heat and power to industrial sites. The importance of operating these systems in an optimal way has increased significantly due to the unstable and in the long term rising prices of fossil fuels as well as the need for reducing the greenhouse gas emissions. This paper presents an analysis of the problem for supporting operator decision making under conditions of variable steam demands from the production processes on an industrial site. An optimisation model has been developed, where besides for running the utility system, also the costs associated with starting-up the operating units have been modelled. The illustrative case study shows that accounting for the shut-downs and start-ups of utility operating units can bring significant cost savings. - Highlights: → Optimisation methodology for decision making on running utility systems. → Accounting for varying steam demands. → Optimal operating specifications when a demand change occurs. → Operating costs include start-up costs of boilers and other units. → Validated on a real-life case study. Up to 20% cost savings are possible.

  17. YEAR-ROUND HOUSEDUST MITE LEVELS ON THE HIGHVELD

    African Journals Online (AJOL)

    electricity. Where possible dust was collected from the main bedroom, using the Rainbow Vacuum Cleaner. Bed linen was removed and the mattress was sampled. An area of 1 m' on the mattress was vacuumed for 2 minutes. The dust sampled was placed in a plastic bag, sealed and labelled. Thereafter the carpet next to.

  18. 16 CFR 1633.9 - Glossary of terms.

    Science.gov (United States)

    2010-01-01

    ... and stationary (see Figure 11). (m) Futon. A flexible mattress generally used on the floor that can be... riser. This is a frame of sofa seating height with two equal size mattresses without a backrest. The... or two single beds as in a high riser (see Figure 11). (dd) Tufted means buttoned or laced through...

  19. Incorporation of industrial laundry sludge in the manufacture of particleboards

    Directory of Open Access Journals (Sweden)

    Luciana Cristina Soto Herek Rezende

    2015-10-01

    Full Text Available This study aimed to demonstrate a sustainable alternative to the use of residues by treating industrial laundry wastewater, thereby making them useful in producing wood particleboards as furniture. For this purpose, physical, chemical, and mechanical tests were carried out in order to characterize the product, which showed acceptable characteristics for commercial use as elements in the furniture industry.

  20. Decolorization of Industrial Waste Using Fenton Process and Photo Fenton

    OpenAIRE

    Wardiyati, Siti; Dewi, Sari Hasnah; Fisli, Adel

    2013-01-01

    Industrial waste water decolorization has been done using the method of Fenton and Photo Fenton. The experiment was conducted in order to obtain the optimum process conditions for industrial waste treatment method with Fenton and Photo Fenton. Industrial waste used in this experiment waste of blue batik making process derived from Rara Djograng Batik Yogyakarta. Factors were studied in this research are the effect of the amount of catalyst FeSO4.7H2O, the amount of oxidant H2O2, and the time ...

  1. An industrial view of the Plowshare program

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Sam [Exploration, El Paso Natural Gas Company (United States)

    1970-05-01

    The presented viewpoints have evolved from extensive interaction since 1963 with government and industry participants in the Plowshare program. During the first decade of the Atomic Energy Commission's Plowshare program, the scientific feasibility of industrial applications of underground nuclear explosive technology was established by the Rainier, Gnome, Hardhat, Shoal, Salmon and Handcar experiments. A new era for examination of the technical and economic feasibility of industrial applications of nuclear explosives began with the Gas-buggy detonation in 1967. This era must be accompanied by close coordination between government and industry which was not required when government alone was establishing scientific feasibility. This presentation on 'industry's view of underground nuclear engineering' will be concentrated on problems which must be resolved to make the transition from scientific feasibility to technical and economic feasibility. The distinctions between 'contained' and 'cratering' applications go far beyond the differences in technology. Cratering objectives have been defined, funded by the government, pursued with a readiness date in mind, and supported by a national policy. Thus far, underground nuclear engineering has enjoyed few of these benefits. Industry's objective in underground nuclear engineering is to establish a viable enterprise which will benefit the public.

  2. Nuclear industry: a young sector of excellence

    International Nuclear Information System (INIS)

    Varin, P.

    2017-01-01

    Nuclear industry is the 3. industrial sector in France and is the good reason why the French energy mix is largely carbon-free. The medium term challenges that faces nuclear industry in this country is first to succeed the extensive refit of nuclear power plants with a view on getting the extension of their operating life and secondly to recruit the skilled staff nuclear industry needs. About 8000 jobs dispatched in the 2500 enterprises that forms the nuclear sector will be available each year up to 2020. The age pyramid shows that numerous retirements are expected in the years to come so the issue of skill and knowledge transfer is looming. 25% of recruitment will be made on the basis of work-study contracts particularly for technical jobs. Concerning recruitment, the nuclear sector is competing with other high-tech sectors like aeronautics or the automobile sector, which make things harder. The image that nuclear industry wants to promote of itself is the image of a young, modern, high-tech industry that appeared less than 50 years ago and whose main purpose is to provide a carbon-free electricity to an avid world. (A.C.)

  3. An industrial view of the Plowshare program

    International Nuclear Information System (INIS)

    Smith, Sam

    1970-01-01

    The presented viewpoints have evolved from extensive interaction since 1963 with government and industry participants in the Plowshare program. During the first decade of the Atomic Energy Commission's Plowshare program, the scientific feasibility of industrial applications of underground nuclear explosive technology was established by the Rainier, Gnome, Hardhat, Shoal, Salmon and Handcar experiments. A new era for examination of the technical and economic feasibility of industrial applications of nuclear explosives began with the Gas-buggy detonation in 1967. This era must be accompanied by close coordination between government and industry which was not required when government alone was establishing scientific feasibility. This presentation on 'industry's view of underground nuclear engineering' will be concentrated on problems which must be resolved to make the transition from scientific feasibility to technical and economic feasibility. The distinctions between 'contained' and 'cratering' applications go far beyond the differences in technology. Cratering objectives have been defined, funded by the government, pursued with a readiness date in mind, and supported by a national policy. Thus far, underground nuclear engineering has enjoyed few of these benefits. Industry's objective in underground nuclear engineering is to establish a viable enterprise which will benefit the public

  4. Monte-Carlo Simulation and Automated Test Bench for Developing a Multichannel NIR-Based Vital-Signs Monitor.

    Science.gov (United States)

    Bruser, Christoph; Strutz, Nils; Winter, Stefan; Leonhardt, Steffen; Walter, Marian

    2015-06-01

    Unobtrusive, long-term monitoring of cardiac (and respiratory) rhythms using only non-invasive vibration sensors mounted in beds promises to unlock new applications in home and low acuity monitoring. This paper presents a novel concept for such a system based on an array of near infrared (NIR) sensors placed underneath a regular bed mattress. We focus on modeling and analyzing the underlying technical measurement principle with the help of a 2D model of a polyurethane foam mattress and Monte-Carlo simulations of the opto-mechanical interaction responsible for signal genesis. Furthermore, a test rig to automatically and repeatably impress mechanical vibrations onto a mattress is introduced and used to identify the properties of a prototype implementation of the proposed measurement principle. Results show that NIR-based sensing is capable of registering miniscule deformations of the mattress with a high spatial specificity. As a final outlook, proof-of-concept measurements with the sensor array are presented which demonstrate that cardiorespiratory movements of the body can be detected and that automatic heart rate estimation at competitive error levels is feasible with the proposed approach.

  5. Development of industrial minerals in Colorado

    Science.gov (United States)

    Arbogast, Belinda F.; Knepper, Daniel H.; Langer, William H.; Cappa, James A.; Keller, John W.; Widmann, Beth L.; Ellefsen, Karl J.; Klein, Terry L.; Lucius, Jeffrey E.; Dersch, John S.

    2011-01-01

    Technology and engineering have helped make mining safer and cleaner for both humans and the environment. Inevitably, mineral development entails costs as well as benefits. Developing a mine is an environmental, engineering, and planning challenge that must conform to many Federal, State, and local regulations. Community collaboration, creative design, and best management practices of sustainability and biodiversity can be positive indicators for the mining industry. A better understanding of aesthetics, culture, economics, geology, climate, vegetation and wildlife, topography, historical significance, and regional land planning is important in resolving land-use issues and managing mineral resources wisely. Ultimately, the consuming public makes choices about product use (including water, food, highways, housing, and thousands of other items) that influence operations of the mineral industry. Land planners, resource managers, earth scientists, designers, and public groups have a responsibility to consider sound scientific information, society's needs, and community appeals in making smart decisions concerning resource use and how complex landscapes should change. An effort to provide comprehensive geosciences data for land management agencies in central Colorado was undertaken in 2003 by scientists of the U.S. Geological Survey and the Colorado Geological Survey. This effort, the Central Colorado Assessment Project, addressed a variety of land-use issues: an understanding of the availability of industrial and metallic rocks and minerals, the geochemical and environmental effects of historic mining activity on surface water and groundwater, and the geologic controls on the availability and quality of groundwater. The USDA Forest Service and other land management agencies have the opportunity to contribute to the sustainable management of natural aggregate and other mineral resources through the identification and selective development of mineral resources and the

  6. Greening of Industry in the Baltic States and Poland

    International Nuclear Information System (INIS)

    Lind, Oddvar

    2003-01-01

    The industries in Estonia, Latvia, Lithuania and Poland struggle to adapt to European standards of energy and environment. The Norwegian Energy Efficiency Group (NEEG) is establishing a network for the food processing industries in these four countries. The goal is to make this sector more energy efficient and friendly to the environment before the countries join the EU in 2004. The four countries have defined five strategic goals for the industry: (1) Improved environment, (2) Energy efficiency, (3) Reduced consumption of natural resources, (4) Production of ''safe food'' and (5) Competitive power on the EU market and at home

  7. 1997 ACEEE summer study on energy efficiency in industry: Proceedings, refereed papers, and summary monographs

    International Nuclear Information System (INIS)

    1997-01-01

    The theme of this conference is: How industry will procure energy efficiency services in the 21st century. This theme was chose in response to the changing nature of energy service companies. These changes will bring about enhanced opportunities for alliance and partnerships in the procurement of energy efficiency services as well as energy supply services. This Summer Study provides an opportunity to explore the opportunities provided by these changes in a marketplace and examines ways in which they can be used to enhance, in a cost-effective manner, energy efficiency and productivity in industry. The refereed papers in this conference are divided into the following topics: Food Products; Chemicals and Related Products; Iron and Steel; International Energy Issues; Electric Motor Systems; Small Industries; Energy Efficiency and Pollution Prevention; Utility Industry Changes; Development of Partnerships; Case Studies; Steam Systems; Industrial Decision Making; and Industrial Energy Efficiency. The summary monographs cover: Electric Motor Systems; Energy Trends and Analysis; Small Industries; Energy Efficiency and Pollution Prevention; Utility Industry Changes; Steam Systems; Industrial Decision Making; and Display-Summary Monograph. Separate abstracts were prepared for all 55 papers

  8. Preliminary Design of Industrial Symbiosis of Smes Using Material Flow Cost Accounting (MFCA Method

    Directory of Open Access Journals (Sweden)

    Siwi Dwi Astuti Rahayu

    2018-01-01

    Full Text Available Industrial symbiosis is a collaboration of several industries to share their necessities such material, energy, technology as well as waste management. As a part of industrial ecology, in principle, this system attempts to emulate ecosystem where waste of an organism is being used by another organism, therefore there is no waste in the nature. This system becomes an effort to optimize resources (material and energy as well as minimize waste. Considerable, in a symbiosis incure material and energy flows among industries. Material and energy in an industry are known as cost carriers, thus flow analysis in this system can be conducted in perspective of material, energy and cost, or called as material flow cost accounting (MFCA that is an economic and ecological appraisal approach. Previous researches shown that MFCA implementation could be used to evaluate an industry’s environmental-related efficiency as well as in planning, business control and decision making. Moreover, the MFCA has been extended to assess environmental performance of SMEs Cluster or industrial symbiosis in SMEs Cluster, even to make preliminary design of an industrial symbiosis base on a major industry. This paper describes the use of MFCA to asses performance of SMEs industrial symbiosis and to improve the performance.

  9. The role of state government in advancing the solar industries

    International Nuclear Information System (INIS)

    Kling, C.

    1999-01-01

    The New Jersey Sustainable Business Office (NJOSB) was created within the New Jersey Commerce Commission in order to support and promote environmentally preferable businesses and to make policy changes that support sustainability throughout New Jersey. This paper will discuss the role that this new office has taken in order to advance the solar industries. The work of the office, to this end, has focused on: surveying the solar energy industry to discover barriers to market, advocating policy change to address level playing field issues, developing strong communication channels between government and industry and leveraging traditional commerce and government programs to provide structured business assistance to the solar industries

  10. Participation in decision-making process, incentives and training as ...

    African Journals Online (AJOL)

    Participation in decision-making process, incentives and training as predictors of organizational commitment among industrial workers. ... African Journal for the Psychological Study of Social Issues ... Results indicated that the three motivational factors jointly and significantly predicted organizational commitment. Also, each ...

  11. Domestic uranium mining and milling industry 1989

    International Nuclear Information System (INIS)

    1990-01-01

    Section 170B of the Atomic Energy Act of 1954, as amended by Public Law 97-415, requires that the Secretary of Energy submit to Congress an annual assessment of the viability of the domestic uranium mining and milling industry. The Energy Information Administration (EIA) of the Department of Energy (DOE) was assigned the responsibility to develop the criteria for use in estimating the viability of the industry. These criteria include four major attributes of industry viability - resource capability, supply response capability, financial capability, and import commitment dependency. Having established these criteria, the Secretary of Energy is required to monitor the industry and make an annual assessment of its viability for 1983 through 1992. The first six assessments were issued in the years 1984 through 1989 based on information available for 1983 through 1988, respectively. The current report provides the data and analyses, based on the information available through the end of the calendar year 1989, supporting the seventh annual assessment of the uranium industry's viability. It presents information on the four major attributes. Data on past and present industry behavior, as well as projections of the future status of the industry (assuming current market conditions), were used to examine the industry's ability to respond, over a 10-year period, to two hypothetical supply disruption scenarios. 20 figs., 23 tabs

  12. From science to industrial technology. NewSUBARU's initiative

    International Nuclear Information System (INIS)

    Ando, A.

    2004-01-01

    The NewSUBARU synchrotron radiation facility is constructed to enhance domestic industries in Hyogo prefecture with high technology and to develop new light sources. NewSUBARU is now pushing up activities in industrial micro fabrication in the world and will make a breakthrough in commercial mass production with synchrotron radiation. The negative alpha-p operation of the storage ring gives good opportunities not only for new understandings of beam physics but also for coherent mm-wave light by very short electron bunches. (author)

  13. Cyber security best practices for the nuclear industry

    International Nuclear Information System (INIS)

    Badr, I.

    2012-01-01

    When deploying software based systems, such as, digital instrumentation and controls for the nuclear industry, it is vital to include cyber security assessment as part of architecture and development process. When integrating and delivering software-intensive systems for the nuclear industry, engineering teams should make use of a secure, requirements driven, software development life cycle, ensuring security compliance and optimum return on investment. Reliability protections, data loss prevention, and privacy enforcement provide a strong case for installing strict cyber security policies. (authors)

  14. Cyber security best practices for the nuclear industry

    Energy Technology Data Exchange (ETDEWEB)

    Badr, I. [Rational IBM Software Group, IBM Corporation, Evanston, IL 60201 (United States)

    2012-07-01

    When deploying software based systems, such as, digital instrumentation and controls for the nuclear industry, it is vital to include cyber security assessment as part of architecture and development process. When integrating and delivering software-intensive systems for the nuclear industry, engineering teams should make use of a secure, requirements driven, software development life cycle, ensuring security compliance and optimum return on investment. Reliability protections, data loss prevention, and privacy enforcement provide a strong case for installing strict cyber security policies. (authors)

  15. The decision-making process and the use of causation and effectuation in the transition from small to medium firms: cases of hospitality industry in Curitiba-PR

    Directory of Open Access Journals (Sweden)

    Talita Leucz

    2015-12-01

    Full Text Available This study sought to analize how the changes caused by the growth of the company affect the decision-making process, focusing on the transition from small to medium businesses. We attempted to fill the existing gap over this period of transition between small and medium firms, especially in the aspects addressed by the logical Causation and Effectuation, described by Sarasvathy (2001. The research was qualitative and exploratory in nature and makes use of the method of case studies through interviews with entrepreneurs, their successors and managers in the hospitality industry, which is a service sector that has had great visibility and growth in recent years. At the end of the survey, it was concluded that the transition from small to medium business affects decisions to i increase the formalization of processes, ii there is a small delegation of powers, iii there is a greater distancing of the employees and senior management, iv there is a greater concern with training of staff, v a support team for decision making is established, vi there is concern about the long term, vii rational aspects are considered for decision, viii the responsibilities become clearer and ix more autonomy is delegated to employees.

  16. Making Up the Deficit: A South African Non-formal Education Project for Industrial Personnel.

    Science.gov (United States)

    Dovey, Ken

    1995-01-01

    Using guided apprenticeships in cognitive and social development and action research, a nonformal education project focused on developing strategic thinking, team values, and internal locus of control in 20 South African industrial participants. Increased self-confidence, better communication/relationship skills, and a broader knowledge base were…

  17. The Novel of Six axes Robotic Arm for Industrial Applications

    Directory of Open Access Journals (Sweden)

    Rajendra R Aparnathi

    2014-05-01

    Full Text Available Automation technology is widely accepted and rapidly growing technology in the field of core and many other industries. Anyone can observe that due to these problems many industries are turning towards automaton. When searching for problem of labor manpower in middle-case industries, we came to know about many other things like production, speed of manufacturing and quality of the product are necessary in the current scenario. These parameters are not being well maintained in incorporate industries with manual manufacturing processes instead of using automatic system. Our objective is to solve these problems by efficient use of different technologies for making an industry fully or partially automated. By using technologies we can try to solve or reduce the effects of above problems.

  18. Process industry properties in nuclear industry

    International Nuclear Information System (INIS)

    Zheng Hualing

    2005-01-01

    In this article the writer has described the definition of process industry, expounded the fact classifying nuclear industry as process industry, compared the differences between process industry and discrete industry, analysed process industry properties in nuclear industry and their important impact, and proposed enhancing research work on regularity of process industry in nuclear industry. (authors)

  19. Decision-making on reverse logistics in the construction industry

    Directory of Open Access Journals (Sweden)

    Thanwadee Chinda

    2016-02-01

    Full Text Available With the growing competition, many construction organizations attempt to improve their productivity, quality, and efficiency. Construction waste management, by means of reverse logistics, becomes a key issue to improve the productivity, and raise the company’s green image. In this study, four reverse logistics methods-direct reuse, remanufacturing, recycling, and landfill-are considered to manage construction and demolition (C&D waste. Two factors (economic and site-specific with their 15 sub-factors affecting the decisions to implement the reverse logistics are examined. The hierarchy model of reverse logistics decisions, developed through the analytic hierarchy process, reveal the importance of the economic factor over the site-specific factor. It is suggested that the transportation cost, the processing cost, the specific sorting technology, and the limited project time must be first considered before making decisions on reverse logistics plans. The construction company can utilize the developed hierarchy model to decide on the most appropriate reverse logistics plan to achieve the best benefits.

  20. A Fuzzy Decision Making Approach for Supplier Selection in Healthcare Industry

    OpenAIRE

    Zeynep Sener; Mehtap Dursun

    2014-01-01

    Supplier evaluation and selection is one of the most important components of an effective supply chain management system. Due to the expanding competition in healthcare, selecting the right medical device suppliers offers great potential for increasing quality while decreasing costs. This paper proposes a fuzzy decision making approach for medical supplier selection. A real-world medical device supplier selection problem is presented to illustrate the application of the proposed decision meth...

  1. Environmental problems in Russian coal industry

    International Nuclear Information System (INIS)

    Kharchenko, V.; Oumnov, V.

    1996-01-01

    The state of the Russian coal industry is complicated both economically and environmentally. Most mines are unprofitable. Several coal mines are intended to be closed. So, under existing conditions, coal mines are unable to give much attention to environmental protection problems. At the same time, coal mining is one of the most polluting industries. The main trends in this industry's negative influence upon the environment are: land spoilage and immobilization to lay out open-pit mines and mineral waste dump areas and tailing piles as well as with industrial waste water runoff; atmospheric pollution with the air coming from underground and substances blown off from dumps, hydrogeological regime intervention in coal mining areas, etc. One way to solve environmental problems in coal mining is a more rational utilization of the accompanying natural coal resources. Such measures make it possible to obtain complementary profits not only at the expense of reducing environmental destruction but producing new kinds of goods or services as well. Examples of similar solutions are solid mineral wastes utilization, underground space utilization, coal gas utilization and other issues

  2. X-ray analysis in the steel industry

    International Nuclear Information System (INIS)

    Bourke, T.; Turner, K.

    1999-01-01

    Full text: The steel industry makes extensive use of X-ray analysis at all stages of the steelmaking process. XRF and XRD techniques, together with the associated techniques of electron probe microanalysis and electron microscopy are key tools for exploration and mine site and process development where detailed grade and mineralogical data is required. In production X-ray analysis is used to monitor and control: mine product grade (eg iron ore, coal and other raw materials), steel making production processes (eg iron ore sinter, incoming raw materials), waste products (eg coal watery refuse, slags) and final products (eg paint coatings, customer complaints). The demands put on X-ray analysis by the Steel Industry are severe. Iron ore mining and steelmaking is a continuous process, hence instrumentation has to be robust and reliable. In addition, with ever tightening environmental controls there is an increasing demand for trace heavy element analysis in both raw and waste materials. Copyright (1999) Australian X-ray Analytical Association Inc

  3. U.S. industry targets record highs after recent severe downturn

    International Nuclear Information System (INIS)

    Sutton, M.F.; Cannon, R.E.

    1992-01-01

    This paper reports that the U.S. gas-processing industry is nearing production, total supply, and demand records. These trends make gas processing one of the few bright spots in the petroleum industry and are especially welcome after the severe conditions of 1986-89. Barring unforeseen industry upheavals, the current year promises a continuation of moderate production increases, stable demand in most major markets, and reasonable product values. A review of current trends, both inside and outside the industry, and an attempt to assess the immediate future, may help prevent the current sense of stability from becoming complacency. Although not broken out in the graphs, other significant milestones in 1991 include the following: Gas-plant ethane production totalled 193 million bbl, the highest in history. This total represents an increase of 33% since 1981 and makes ethane the principal gas-plant product today. Gas-plant propane production totalled 177 million bbl. Supplemented by 153 million bbl of refinery production and 31 million bbl of imports, both domestic production and total supply of propane in 1991 were the second highest in history. Including refinery production, total domestic gas-liquids production in 1991 was 785 million bbl, an all-time high

  4. Prosperity without pollution: The prevention strategy for industry and consumers

    International Nuclear Information System (INIS)

    Hirschhorn, J.S.; Oldenburg, K.V.

    1990-01-01

    Here is the first book to explain why only a preventative environmental strategy can work: because growing population, consumption and industrialization cripple current, rather haphazard, remedial efforts. This book shows how our society can make more with less, be more competitive and less polluting, while maintaining our standard of living by reducing and eventually eliminating the production of wastes and pollutants from industry, commerce, homes, farms, and institutions. This may seem far-fetched, but be prepared to discover in this book that there can be a middle ground between ecology and economy - and that you can help achieve it. You'll find data and examples that any person can use, from engineers in industry to office workers to activists. Every concerned citizen will also want to consider the authors' innovative suggestions for taxing wastes and using the proceeds to help companies and communities switch to new industrial processes. Also, you should evaluate their proposals to reburies meaningful waste and toxicity information on product labels, to make bans on chemicals and products a more credible and available corrective measure, and to secure permanent, high-level government support for pollution prevention

  5. PEASANT AND SCIENTIFIC KNOWLEDGE ON PLANOSOLS AS A SOURCE OF MATERIALS IN THE MAKING OF NON-INDUSTRIAL POTTERY

    Directory of Open Access Journals (Sweden)

    Raiana Lira Cabral

    2015-02-01

    Full Text Available Ethnopedological studies have mainly focused on agricultural land uses and associated practices. Nevertheless, peasant and indigenous populations use soil and land resources for a number of additional purposes, including pottery. In the present study, we describe and analyze folk knowledge related to the use of soils in non-industrial pottery making by peasant potters, in the municipality of Altinho, Pernambuco State, semiarid region at Brazil. Ethnoscientific techniques were used to record local knowledge, with an emphasis on describing the soil materials recognized by the potters, the properties they used to identify those soil materials, and the criteria employed by them to differentiate and relate such materials. The potters recognized three categories of soil materials: “terra” (earth, “barro” (clay and, “piçarro” (soft rock. The multi-layered arrangement of these materials within the soil profiles was similar to the arrangement of the soil horizon described by formal pedologists. “Barro vermelho” (red clay was considered by potters as the principal ceramic resource. The potters followed morphological and utilitarian criteria in distinguishing the different soil materials. Soils from all of these sites were sodium-affected Alfisols and correspond to Typic Albaqualf and Typic Natraqualf in the Soil Taxonomy (Soil Survey Staff, 2010.

  6. Flooring for Schools: Unsightly Walkways

    Science.gov (United States)

    Baxter, Mark

    2011-01-01

    Many mattress manufacturers recommend that consumers rotate their mattresses at least twice a year to help prevent soft spots from developing and increase the product's life span. It's unfortunate that the same kind of treatment can't be applied to flooring for schools, such as carpeting, especially in hallways. Being able to flip or turn a carpet…

  7. The impact on the fishing industry

    International Nuclear Information System (INIS)

    Buchan, G.; Allan, R.

    1992-01-01

    When the first signs of the oil boom manifested themselves on the Scottish business and community scene in the early 1970's those in the fishing industry in particular had no idea of the magnitude of the impact that it would have on their way of life or the manner in which they had traditionally earned their living. Some 20 years on from that emerging scenario, the reality must e faced that the fishing industry has a very formidable and still growing competitor in the North Sea, which has at times threatened to overwhelm fishing, in terms of its sheer technical, economic and political muscle and know-how. This chapter examines the individual aspects of the interaction between the fishing industry and the oil resource development process that contribute to the overall impact. These include: lack of consultation with the fishing industry by the government when granting exploration licences; the location of platforms, drilling rigs, subsea installations and suspended well-heads; damage occurring when fishing gear makes contact with pipelines lying proud on the seabed in traditional fishing grounds; the amount of debris dumped by the oil and gas industry; economic loss suffered by the fishing industry as a result of its exclusion from many traditional areas; concern over decommissioned and abandoned off-shore installations. Nevertheless, it is acknowledged that the fishing industry has derived significant benefits from the presence of the oil industry in the North Sea, particularly from the readiness of platform personnel to respond to needs and emergencies on any fishing vessels. (UK)

  8. Cyber security in nuclear power plants and its portability to other industrial infrastructures

    International Nuclear Information System (INIS)

    Champigny, Sebastien; Gupta, Deeksha; Watson, Venesa; Waedt, Karl

    2017-01-01

    Power generation increasingly relies on decentralised and interconnected computerised systems. Concepts like ''Industrial Internet of Things'' of the Industrial Internet Consortium (IIC), and ''Industry 4.0'' find their way in this strategic industry. Risk of targeted exploits of errors and vulnerabilities increases with complexity, interconnectivity and decentralization. Inherently stringent security requirements and features make nuclear computerised applications and systems a benchmark for industrial counterparts seeking to hedge against those risks. Consequently, this contribution presents usual cyber security regulations and practices for nuclear power plants. It shows how nuclear cyber security can be ported and used in an industrial context to protect critical infrastructures against cyber-attacks and industrial espionage.

  9. Mathematical formulas for industrial and mechanical engineering

    CERN Document Server

    Kadry, Seifedine

    2014-01-01

    Mathematical Formulas For Industrial and Mechanical Engineering serves the needs of students and teachers as well as professional workers in engineering who use mathematics. The contents and size make it especially convenient and portable. The widespread availability and low price of scientific calculators have greatly reduced the need for many numerical tables that make most handbooks bulky. However, most calculators do not give integrals, derivatives, series and other mathematical formulas and figures that are often needed. Accordingly, this book contains that information in an easy way to

  10. The North West cyber security industry : export potential assessment

    OpenAIRE

    Prince, Daniel David Campbell; Fitton, Oliver James

    2016-01-01

    Cyber Security businesses in the North West of England form an industry which is growing. This study has taken an in depth analysis of the industry to determine its size, make up and readiness to export and is the first of its kind classifying business within the framework identified by the UKTI cyber export strategy. This report presents the findings of the research undertaken independently by Lancaster University commissioned by the UKTI.

  11. Life-long learning strategies in tourism and hotel industry

    OpenAIRE

    Trivun, Veljko; Kenjic, Vanja; Mahmutcehajic, Fatima

    2008-01-01

    Tourism is the phenomenon of great social and economic importance. It is the biggest and the fastest growing industry which is developing 1.5 faster than the other industries. Additionally, tourism represents a mass movement of people which makes strong impact on many destinations, traditional or emerging ones. This have both economic and social influence on developing destinations, creating employment opportunities and economic benefits for those involved in tourism activities. Tourism de...

  12. Implementasi Outsourcing Strategy Pada Industri Rokok Sigaret Kretek Mesin

    OpenAIRE

    Idris, Idris

    2013-01-01

    Many concepts and methods of efficiency have been developed recently. Ones is outsourcing strategy. It gives strategic benefit, however outsourcing have strategic risk. To be survive in global competition, Ciggarete Industry must make its production efficiently by outsourcing. Its uses the strategy to keep its machine and equipment. This research uses qualitative approach and case study Ciggarete Industry. By analyzing value chain at first, the research continue to identifying internal and ex...

  13. CONTRIBUTION TO THE IMPROVEMENT OF PRODUCTS QUALITY IN BAKING INDUSTRY

    Directory of Open Access Journals (Sweden)

    Aleksandar Marić

    2009-09-01

    Full Text Available Food industry occupies special place in the processing industry, especially when we talk on the manufacturing of bakery products. Variable products quality on the market initiated the authors of this study to make an attempt, using comparative analysis of methods for quality control that are at most applied in bakery plants and other "convenient" methods to indicate the shortcomings and to argue convenience of using of methods that would improve testing of the quality. That approach could create a base for designing of model of quality improvement the baking industry.

  14. Application of knowledge based software to industrial automation in Japan

    International Nuclear Information System (INIS)

    Matsumoto, Yoshihiro

    1985-01-01

    In Japan, large industrial undertakings such as electric utilities or steel works are making first steps towards knowledge engineering, testing the applicability of knowledge based software to industrial automation. The goal is to achieve more intelligent, computer-aided assistance for the personnel and thus to enhance safety, reliability, and maintenance efficiency in large industrial plants. The article presents various examples showing advantages and draw-backs of such systems, and potential applications among others in nuclear or fossil fueled power plants or in electricity supply control systems. (orig./HP) [de

  15. Vocational Education and Industrial Relations: Sweden 1910–1975

    Directory of Open Access Journals (Sweden)

    Tobias Karlsson

    2018-02-01

    Full Text Available In this article we discuss vocational education in Sweden against the backdrop of the changing nature of industrial relations in the period from ca 1910 to 1975. Drawing upon evidence from official inquiries and case studies of two industries (forest industry and shipbuilding, we show that Sweden in the 1940s and 1950s can be described as a collective skill formation system in the making, where firms, intermediary associations, and the state cooperated around vocational education and training. However, Sweden developed in a very different direction than similar countries. We argue that this remarkable change of trajectory cannot be understood without considering the simultaneous disintegration of the model of industrial relations, along with general changes in the system of education.

  16. Competition in the retail gasoline industry

    Science.gov (United States)

    Brewer, Jedidiah

    2007-05-01

    This dissertation examines competition in the retail gasoline industry. The first chapter highlights the importance of gasoline in modern society, introduces my work, and places it in the context of the existing academic literature. The second chapter details the institutional structure and profitability of the industry. The vast majority of retail gasoline stations are not directly owned and operated by major oil companies. Instead, most stations are set up under other contractual relationships: lessee-dealer, open-dealer, jobber-owned-and-operated, and independent. Gasoline retailers make relatively low profits, as is the case in many other retail industries, and are substantially less profitable than major oil companies. Gas stations also make less money when retail prices are climbing than when they are falling. As prices rise, total station profits are near zero or negative. When retail prices are constant or falling, retailers can make positive profits. The third chapter describes the entry of big-box stores into the retail gasoline industry over the last decade. The growth of such large retailers, in all markets, has led to a great deal of controversy as smaller competitors with long-term ties to the local community have become less common. I estimate the price impact that big-box stores have on traditional gasoline retailers using cross-sectional data in two geographically diverse cities. I also examine changes in pricing following the entry of The Home Depot into a local retail gasoline market. The results show that big-box stores place statistically and economically significant downward pressure on the prices of nearby gas stations, offering a measure of the impact of the entry of a big-box store. Chapter 4 examines the nature of price competition in markets where some competing retailers sell the same brand. The price effect of having more retailers selling the same brand is theoretically unclear. High brand diversity could give individual retailers

  17. Challenges in Building a Global Supply Chain in the Apparel Industry

    Directory of Open Access Journals (Sweden)

    Vidyaranya B. Gargeya

    2001-09-01

    Full Text Available The last decade of the twentieth century has been characterized with the growth of global supply chains in a wide variety of industries. Global supply chain management in the apparel industry presents a wide variety of challenges. This paper presents a framework elaborating the challenges associated with communication, cultural relationships, technology, production processes, supplier arrangements, and transportation infrastructure in building a global supply chain in the apparel industry catering primarily to the U.S. market. The paper, in the concluding section, makes a few suggestions for future research in global supply chain management in the apparel industry.

  18. FINANCIAL SECURITY OF FOOD INDUSTRY ENTERPRISES IN POLAND

    Directory of Open Access Journals (Sweden)

    Anna Bieniasz

    2016-06-01

    Full Text Available The aim of the study was to evaluate the fi nancial security of food industry enterprises in Poland in 2009–2013, with particular emphasis on the processing industry of milk and cheese production, including those operating in the form of dairy cooperatives. The analysis was conducted using unpublished data of GUS, as well as individual fi nancial data on dairy cooperatives. The study indicates that the manufacturing sector of food and beverage production, as well as milk processing and cheese making, according to the established measures of fi nancial security, can be considered safe. This assessment, however, is varied and results from the specifi c industries, especially in relation to capital management.

  19. An Assessment of Industrial Customers' Satisfaction at Ethiopian ...

    African Journals Online (AJOL)

    An Assessment of Industrial Customers' Satisfaction at Ethiopian Electric Power Corporation: A Case of South Addis Ababa Region. ... up with an appropriate service delivery standards, proper complaint handling mechanisms, relevant training for its employees, and strengthening decision making power of employees.

  20. Regional economic contributions of the forest-based industries in the south

    Science.gov (United States)

    P.B. Aruna; Frederick Cubbage; Karen Abt; Clair Redmond

    1997-01-01

    Forest-based industries (including forestry) make substantial direct contributions to the economy of the South, as well as contributing to pleasant living conditions and environmental protection. As of 1992, about 633,000 persons were employed in forest-based industries, comprising 1.5 percent of all southern employment. Total wages amounted to $15 billion in 1990, or...

  1. Handheld Computers in Education: An Industry Perspective

    Science.gov (United States)

    van 't Hooft, Mark; Vahey, Philip

    2007-01-01

    Five representatives from the mobile computing industry provide their perspectives on handhelds in education. While some of their ideas differ, they all agree on the importance of staff development, appropriate curriculum development, and teacher support to create the kinds of personalized learning environments that mobile devices make possible.

  2. Industrial process heat case studies. [PROSYS/ECONMAT code

    Energy Technology Data Exchange (ETDEWEB)

    Hooker, D.W.; May, E.K.; West, R.E.

    1980-05-01

    Commercially available solar collectors have the potential to provide a large fraction of the energy consumed for industrial process heat (IPH). Detailed case studies of individual industrial plants are required in order to make an accurate assessment of the technical and economic feasibility of applications. This report documents the results of seven such case studies. The objectives of the case study program are to determine the near-term feasibility of solar IPH in selected industries, identify energy conservation measures, identify conditions of IPH systems that affect solar applications, test SERI's IPH analysis software (PROSYS/ECONOMAT), disseminate information to the industrial community, and provide inputs to the SERI research program. The detailed results from the case studies are presented. Although few near-term, economical solar applications were found, the conditions that would enhance the opportunities for solar IPH applications are identified.

  3. A new economic model for resource industries-implications for universities

    International Nuclear Information System (INIS)

    Romig, P.R.

    1993-01-01

    The upheaval in the US petroleum industry has had repercussions in the university community. Geoscience enrollments have plummeted, financial support has declined, and there are rumors that some programs have reduced mathematical rigor to maintain enrollment. While the adverse affects have been widespread, there is disagreement about implications and expectations for the future. Some argue that emphasis on short-term profitability produces ill-conceived, precipitous reactions which perpetuate the turmoil. Others respond that the resource and environmental needs of a burgeoning global population will ensure long-term growth. Both arguments miss the point. The fundamental economic structure of the industry is changing from revenue-driven to marginal-return. In marginal-return industries, investments depend on quantitative assessments of risk and return, and the use of interdisciplinary teams is the norm. University programs must educate students in engineering design and structured decision-making processes, develop integrated numeric models and create infrastructures that support multidisciplinary collaboration. Educational programs must begin teaching principles of engineering design and structured decision-making, with increased emphasis on outreach to the experienced employee. Meeting those needs will require closer collaboration between industry and the universities. Universities that are successful will reap a fringe benefit; their graduate will be better-qualified to be leaders in the environmentally geoscience field, which one day may be bigger than the oil industry

  4. Continuing Professional Development Build on Industry-Academia Partnerships

    DEFF Research Database (Denmark)

    Fink, Flemming K.

    2007-01-01

    A challenge for university - industry partnerships is to combine productive engineering and academic learning, to combine industrial engineering tasks with their tasks in Continuing Professional Development (CPD). The rather new methodology Facilitated Work Based Learning (FWBL) can be defined...... as a CPD method based on a partnership between the university and the enterprise with the purpose of transferring research based knowledge thus making it an integral part of the daily business. Scientific staff from the university is facilitating a research based learning process and competence development...

  5. Towards a nuclear industry boosted by artificial intelligence?

    International Nuclear Information System (INIS)

    Le Ngoc, B.

    2017-01-01

    Artificial intelligence (AI) is deemed as the fourth industrial revolution after the steam engine, electric power and the computer. Auto manufacturers invest a lot in AI to develop autonomous vehicles. Nuclear industry that has to deal with a huge amount of data due to the complexity of its installations may benefit from AI in terms of quick handling of complex situations, of reducing the rate of errors, of drawing adequate conclusions through the right crossing of data and of improving decision making. (A.C.)

  6. Norwegian industry and health promotion 1910-1967.

    Science.gov (United States)

    Ibsen, H

    1993-01-01

    The development of occupational health services in Norway is explored by making a case study of both a chocolate factory and a cement factory. The study shows how different motives and ideological positions promoted the industrial health service. Prominent among them were a social and political philosophy, those of welfare capitalism, as an alternative to socialism and state policy in building the affluent society and the move toward improvements of production. All leading to a growing interest in the human factor in industry, where the medical officer should help to shape a satisfied, rational and productive worker in a healthy work environment.

  7. Charging Customers or Making Profit? Business Model Change in the Software Industry

    Directory of Open Access Journals (Sweden)

    Margit Malmmose Peyton

    2014-08-01

    Full Text Available Purpose: Advancements in technology, changing customer demands or new market entrants are often seen as a necessary condition to trigger the creation of new Business Models, or disruptive change in existing ones. Yet, the sufficient condition is often determined by pricing and how customers are willing to pay for the technology (Chesbrough and Rosenbloom, 2002. As a consequence, much research on Business Models has focused on innovation and technology management (Rajala et al., 2012; Zott et al., 2011, and software-specific frameworks for Business Models have emerged (Popp, 2011; Rajala et al., 2003; Rajala et al., 2004; Stahl, 2004. This paper attempts to illustrate Business Model change in the software industry. Design: Drawing on Rajala et al. (2003, this case study explores the (1 antecedents and (2 consequences of a Business Model-change in a logistics software company. The company decided to abolish their profitable fee-based licensing for an internet-based version of its core product and to offer it as freeware including unlimited service. Findings: Firstly, we illustrate how external developments in technology and customer demands (pricing, as well as the desire for a sustainable Business Model, have led to this drastic change. Secondly, we initially find that much of the company’s new Business Model is congruent with the company-focused framework of Rajala et al. (2003 [product strategy; distribution model, services and implementation; revenue logic]. Value: The existing frameworks for Business Models in the software industry cannot fully explain the disruptive change in the Business Model. Therefore, we suggest extending the framework by the element of ‘innovation’.

  8. How the health belief model helps the tobacco industry: individuals, choice, and "information".

    Science.gov (United States)

    Balbach, Edith D; Smith, Elizabeth A; Malone, Ruth E

    2006-12-01

    To analyse trial and deposition testimony of tobacco industry executives to determine how they use the concepts of "information" and "choice" and consider how these concepts are related to theoretical models of health behaviour change. We coded and analysed transcripts of trial and deposition testimony of 14 high-level executives representing six companies plus the Tobacco Institute. We conducted an interpretive analysis of industry executives' characterisation of the industry's role as information provider and the agency of tobacco consumers in making "choices". Tobacco industry executives deployed the concept of "information" as a mechanism that shifted to consumers full moral responsibility for the harms caused by tobacco products. The industry's role was characterised as that of impartial supplier of value-free "information", without regard to its quality, accuracy and truthfulness. Tobacco industry legal defences rely on assumptions congruent with and supported by individual rational choice theories, particularly those that emphasise individual, autonomous decision-makers. Tobacco control advocates and health educators must challenge the industry's preferred framing, pointing out that "information" is not value-free. Multi-level, multi-sectoral interventions are critical to tobacco use prevention. Over-reliance on individual and interpersonal rational choice models may have the effect of validating the industry's model of smoking and cessation behaviour, absolving it of responsibility and rendering invisible the "choices" the industry has made and continues to make in promoting the most deadly consumer product ever made.

  9. Starting Up Your Own Business in the Hotel and Catering Industry. A Self-Help Guide from the Small Business Service of the Hotel and Catering Industry Training Board.

    Science.gov (United States)

    Hotel and Catering Training Board, Wembley (England).

    This guide is intended to assist the potential small business proprietor in successfully starting a business in the hotel and catering industry. It is divided into five sections. The first section discusses factors to be considered in making the initial decision of whether or not to seek self-employment in the industry (options, potential…

  10. Industrialization drive of radiation processing for economic growth in China

    International Nuclear Information System (INIS)

    Lu Yanxiao

    1996-12-01

    The transfer of research and development achievements of radiation processing to routine industrial applications in China is reviewed. While making a brief survey of historical background, the paper indicates the different roles that various domestic organizations played in the industrialization drive of radiation processing. Among them the Government's role is the most important one. In accordance with recent growth of the number of industrial radiation facilities (e.g. cobalt-60 irradiators and electron beam accelerators) and current application of radiation processing in main fields in different parts of the country, it can be said that a new radiation processing industry is shaping up in its developing stage to satisfy the growing requirements for economic booming in China. (16 refs.)

  11. EMATs for science and industry noncontacting ultrasonic measurements

    CERN Document Server

    Hirao, Masahiko

    2003-01-01

    EMATs for Science and Industry comprises the physical principles of electromagnetic acoustic transducers (EMATs) and the applications to scientific and industrial ultrasonic measurements on materials. The text is arranged in four parts: -PART I is intended to be a self-contained description of the basic elements of coupling mechanism along with practical designing of EMATs for various purposes. There are several implementations to compensate for the low transfer efficiency of the EMATs. Useful tips to make an EMAT are also presented. -PART II describes the principle of electromagnetic acoustic resonance (EMAR), which makes the most of contactless nature of EMATs and is the most successful amplification mechanism for precise velocity and attenuation measurements. -PART III applies EMAR to studying the physical acoustics. New measurements emerged on three major subjects; in situ monitoring of dislocation behavior, determination of anisotropic elastic constants, and acoustic nonlinearity evolution. -PART IV deal...

  12. Cyber security in nuclear power plants and its portability to other industrial infrastructures

    Energy Technology Data Exchange (ETDEWEB)

    Champigny, Sebastien; Gupta, Deeksha; Watson, Venesa; Waedt, Karl [AREVA GmbH, Erlangen (Germany)

    2017-06-15

    Power generation increasingly relies on decentralised and interconnected computerised systems. Concepts like ''Industrial Internet of Things'' of the Industrial Internet Consortium (IIC), and ''Industry 4.0'' find their way in this strategic industry. Risk of targeted exploits of errors and vulnerabilities increases with complexity, interconnectivity and decentralization. Inherently stringent security requirements and features make nuclear computerised applications and systems a benchmark for industrial counterparts seeking to hedge against those risks. Consequently, this contribution presents usual cyber security regulations and practices for nuclear power plants. It shows how nuclear cyber security can be ported and used in an industrial context to protect critical infrastructures against cyber-attacks and industrial espionage.

  13. Orthopaedic research and education foundation and industry.

    Science.gov (United States)

    Wurth, Gene R; Sherr, Judy H; Coffman, Thomas M

    2003-07-01

    Members of orthopaedic industry commit a significant amount of funds each year to support research and education programs that are directly related to their product(s). In addition, industry supports organizations such as the Orthopaedic Research and Education Foundation. The relationship between the Orthopaedic Research and Education Foundation and industry began in the early 1980s. The support to the Orthopaedic Research and Education Foundation from industry primarily has come in the form of unrestricted grants. These grants best can be looked at as an investment rather than a contribution. This form of giving, once called corporate philanthropy is more accurately referred to as strategic philanthropy. Members of industry make these investments to enhance their reputations, build brand awareness, market their products and services, improve employee morale, increase customer loyalty, and establish strategic alliances. The specialty of orthopaedics is among the leaders in medicine in the amount of funding raised within the specialty for research and education programs. This is because of the amount of support from members of industry and the surgeons. During the past 15 years, 40% of the annual support to the Orthopaedic Research and Education Foundation has come from industry and the balance has come from surgeons and members of lay public. Future industry support of the Orthopaedic Research and Education Foundation and other organizations within the specialty of orthopaedics will be dependent on the continued demonstration of tangible returns in areas described.

  14. Adaptation to climate change and industrial vulnerability

    International Nuclear Information System (INIS)

    Garnaud, Benjamin; Ferret, Celine

    2010-06-01

    In today's societies, the production base made up by the industrial fabric acts as an important link between the climate and its variations and our lifestyle. However, several decades of experience have often enabled us to minimise the impact of the weather and its fluctuations on activities, making the industrial sector out to be purely artificial and protected from climate impacts. Yet climate change leads us to challenge this assumption: if the industrial base is supposed to be impervious to the current climate, is this still the case in a context of climate change? In an attempt to answer this question, the Invulnerable project was launched, led by the Institute for Sustainable Development and International Relations (IDDRI) and bringing together scientific and industrial partners (Meteo-France, IPSL, CERFACS). Observing the availability of scientific resources on climate change, partly resulting from the modeling research coordinated by the IPCC, the idea was to work with industries to identify their vulnerabilities and to use these to define indicators for climatologists. These indicators are not chosen by scientists without consulting industries, but are in fact defined by these industries to ensure they correspond to their needs as closely as possible. The challenge is therefore to bring together scientists and industries and to catalyse a mutual understanding to ensure this discussion results in one or several indicators that are relevant to the activity in question and on which climatologists can work

  15. Technological change and industrial energy efficiency : Exploring the low-carbon transformation of the German iron and steel industry

    NARCIS (Netherlands)

    Arens, M.

    2017-01-01

    Climate change is a key challenge of our time. The iron and steel industry emits 6.5 % of global anthropogenic CO2 that is likely to drive global warming. Greenhouse gases, among these CO2, are to be reduced to 5-20% of today’s level in industrialised countries. Thus, the steel sector must make

  16. Technology Roadmap. Energy Loss Reduction and Recovery in Industrial Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2004-11-01

    To help guide R&D decision-making and gain industry insights on the top opportunities for improved energy systems, ITP sponsored the Energy Loss Reduction and Recoveryin Energy Systems Roadmapping Workshopin April 2004 in Baltimore, Maryland. This Technology Roadmapis based largely on the results of the workshop and additional industrial energy studies supported by ITP and EERE. It summarizes industry feedback on the top opportunities for R&D investments in energy systems, and the potential for national impacts on energy use and the environment.

  17. Identification of indigenous science in the brick-making process through ethnoscience study

    Science.gov (United States)

    Nuroso, H.; Supriyadi; Sudarmin, S.; Sarwi

    2018-03-01

    This study aims to find indigenous science in making bricks. In the brick-making process there are concepts of science used for generations obtained through local wisdom. This research method is descriptive qualitative by collecting data through interviews on brick-making home industries in Penggaron village of Semarang city and in Welahan village of Jepara. The result of the research indicates that the indigenous science is in the process of making bricks which includes materials composing, printing, drying, burning and brick quality testing. These findings can be integrated in the course of environmental physics.

  18. Organisation, ‘anchoring’ of knowledge, and innovation in the construction industry

    DEFF Research Database (Denmark)

    Drejer, Ina; Vinding, Anker Lund

    2004-01-01

    explanation for the relatively poor innovation performance of the industry. Using survey data from the Danish construction industry the paper investigates the importance of learning and ?anchoring? of project specific knowledge within the firms for facilitating engagement in innovative activities...... at the firm level. The data refer to the overall Danish construction industry, as well as a specific region, North Jutland, which is relatively specialised in construction. By using latent class and regression analysis the results show that firms, which to a high extent make use of partnering and other...... interorganisational features, combined with internal product and process evaluation and knowledge diffusion, are more likely to engage in innovative activities than firms that make less use of what we label ?knowledge anchoring mechanisms?. This indicates that there are ways for firms to compensate for the problems...

  19. Toma de decisiones en las Pymes Mexicanas: El valor de la estratégico de un simulador presupuestario de tipo Industrial (Decision making on mexican SME’S: The strategic value of an industrial type budget simulator

    Directory of Open Access Journals (Sweden)

    Rafael Espinosa Mosqueda

    2014-09-01

    Full Text Available En la Grecia clásica, la excelencia del ciudadano consistía en el cultivo de tres virtudes específicas: forta- leza, templanza y la dicaiosine o justicia. Estas virtudes formaban un ciudadano relevante, útil y espléndido. Platón añadió una cuarta virtud, la prudencia, el hábito cualidad del hegemone, el conductor, el guía y también el comandante del ejército, el líder. A estos se instruía para saber juzgar sobre un problema o un caso concreto, así como para dirigir estratégicamente. Extrapolado al mundo empresarial actual, se convierte en la destreza o capacidad para la toma de decisiones. En concordancia, aquí se presenta un instrumento de apoyo en la toma de decisiones, diseñado para los directivos de las PYMES industriales mexicanas, el cual está fundado en el modelo Costo-Volumen-Utilidad (CVU. El“Simulador Presupuestario para PYMES del Sector Industrial”, aplicado en veintitrés giros indus- triales de la zona Laja-Bajío, en el Estado de Guanajua- to, demostró ampliamente su confiabilidad al permitir al directivo, emprendedor o desarrollador de empresas visualizar de una forma documentada su actuar en los negocios. El simulador puede ser adaptado y adoptado para otros ramos y latitudes, con lo cual el empresario PYME tendrá una ventaja competitiva.   Abstract In classic Greece, a citizen’s excellence was measured by his fostering of three specific virtues: fortitude, temperance and dicaiosine or justice. These virtues formed a relevant, utile and splendid citizen. Plato added a fourth virtue, prudence, a quality attributed to the hegemone, the driver, the guide, the military commander, the leader. They were taught to judge quickly on a concrete problem or case, as well as to strategically lead. Extrapolating this concept to the current world, it becomes the ability or capacity to make decisions.Accordingly, a support instrument for decision making is presented here, designed for managers of Mexican industrial

  20. The Tobacco Industry and Children's Rights.

    Science.gov (United States)

    van der Eijk, Yvette; Bialous, Stella A; Glantz, Stanton

    2018-05-01

    The manufacture, use, and marketing of tobacco present a serious threat to children's right to health. This makes the Convention on the Rights of the Child a potentially powerful tobacco-control tool and the United Nations Children's Fund (UNICEF), which oversees the convention's implementation, a potential leader in tobacco control. UNICEF actively supported tobacco control initiatives in the late 1990s, but since the early 2000s UNICEF's role in tobacco control has been minimal. Using the Truth Tobacco Industry Documents library, an online collection of previously secret tobacco industry documents, we sought to uncover information on the tobacco industry's ties with UNICEF. We found that from 1997 to 2000, when UNICEF was actively promoting tobacco control to support children's rights, the tobacco industry saw children's rights and UNICEF as potentially powerful threats to business that needed to be closely monitored and neutralized. The industry then positioned itself as a partner with UNICEF on youth smoking prevention initiatives as a way to avoid meaningful tobacco control measures that could save children's lives. After UNICEF's corporate engagement guidelines were loosened in 2003, tobacco companies successfully engaged with UNICEF directly and via front groups, including the Eliminating Child Labour in Tobacco Growing Foundation. This was part of an overall tobacco industry strategy to improve its corporate image, infiltrate the United Nations, and weaken global tobacco-control efforts. As part of its mission to protect children's rights, UNICEF should end all partnerships with the tobacco industry and its front groups. Copyright © 2018 by the American Academy of Pediatrics.

  1. Technical property and application of industrial computed tomography

    International Nuclear Information System (INIS)

    Sun Lingxia; Ye Yunchang

    2006-01-01

    The main technical property of industrial computed tomography (ICT) and its application in non-destructive testing (NDT) were described. And some examples of ICT applications in such fields as defects detection, welding quality, density uniformity, structure analysis and making-up quality were given. (authors)

  2. Industrial Energy Management Decision Making for Improved Energy Efficiency—Strategic System Perspectives and Situated Action in Combination

    Directory of Open Access Journals (Sweden)

    Patrik Thollander

    2015-06-01

    Full Text Available Improved industrial energy efficiency is a cornerstone in climate change mitigation. Research results suggest that there is still major untapped potential for improved industrial energy efficiency. The major model used to explain the discrepancy between optimal level of energy efficiency and the current level is the barrier model, e.g., different barriers to energy efficiency inhibit adoption of cost-effective measures. The measures outlined in research and policy action plans are almost exclusively technology-oriented, but great potential for energy efficiency improvements is also found in operational measures. Both technology and operational measures are combined in successful energy management practices. Most research in the field of energy management is grounded in engineering science, and theoretical models on how energy management in industry is carried out are scarce. One way to further develop and improve energy management, both theoretically as well as practically, is to explore how a socio-technical perspective can contribute to this understanding. In this article we will further elaborate this potential of cross-pollinating these fields. The aim of this paper is to relate energy management to two theoretical models, situated action and transaction analysis. We conclude that the current model for energy management systems, the input-output model, is insufficient for understanding in-house industrial energy management practices. By the incorporation of situated action and transaction analysis to the currently used input-output model, an enhanced understanding of the complexity of energy management is gained. It is not possible to find a single energy management solution suitable for any industrial company, but rather the idea is to find a reflexive model that can be adjusted from time to time. An idea for such a reflexive model would contain the structural elements from energy management models with consideration for decisions being

  3. Evolution of Secondary Software Businesses: Understanding Industry Dynamics

    Science.gov (United States)

    Tyrväinen, Pasi; Warsta, Juhani; Seppänen, Veikko

    Primary software industry originates from IBM's decision to unbundle software-related computer system development activities to external partners. This kind of outsourcing from an enterprise internal software development activity is a common means to start a new software business serving a vertical software market. It combines knowledge of the vertical market process with competence in software development. In this research, we present and analyze the key figures of the Finnish secondary software industry, in order to quantify its interaction with the primary software industry during the period of 2000-2003. On the basis of the empirical data, we present a model for evolution of a secondary software business, which makes explicit the industry dynamics. It represents the shift from internal software developed for competitive advantage to development of products supporting standard business processes on top of standardized technologies. We also discuss the implications for software business strategies in each phase.

  4. The alcohol industry and public interest science.

    Science.gov (United States)

    Stenius, Kerstin; Babor, Thomas F

    2010-02-01

    This report argues that the growing involvement of the alcohol industry in scientific research needs to be acknowledged and addressed. It suggests a set of principles to guide ethical decision-making in the future. We review relevant issues with regard to relationships between the alcohol industry and the international academic community, especially alcohol research scientists. The guiding principles proposed are modelled after expert committee statements, and describe the responsibilities of governmental agencies, the alcohol industry, journal editors and the academic community. These are followed by recommendations designed to inform individuals and institutions about current 'best practices' that are consistent with the principles. Growing evidence from the tobacco, pharmaceutical and medical fields suggests that financial interests of researchers may compromise their professional judgement and lead to research results that are biased in favour of commercial interests. It is recommended that the integrity of alcohol science is best served if all financial relationships with the alcoholic beverage industry are avoided. In cases where research funding, consulting, writing assignments and other activities are initiated, institutions, individuals and the alcoholic beverage industry itself are urged to follow appropriate guidelines that will increase the transparency and ethicality of such relationships.

  5. Curriculum Development Based On INQF and Business/Industries Sector for Improvement Competency of Basic Pattern Making Students at Vocational High School

    Science.gov (United States)

    Nilasari, Yoni; Dasining

    2018-04-01

    In this era of globalization, every human resource is faced with a competitive climate that will have a major impact on the development of the business and industrial sector. Therefore it is deemed necessary to research the development of curriculum based on INQF and the business/industries sector in order to improve the competence of Sewing Technique for Vocational High School Students of fashion clothing program. The development of curricula based on INQF and the business/industries is an activity to produce a curriculum that suits the needs of the business and industries sector. The formulation of the problem in this research are: (1) what is the curriculum based on INQF and the business/industries sector?; (2) how is the process and procedure of curriculum development of fashion program profession based on INQF and the business/industries sector?; And (3) how the result of the curriculum of fashion expertise based on INQF and the business/industries sector. The aims of research are: (1) explain what is meant by curriculum based on INQF and business/industries sector; (2) to know the process and procedure of curriculum development of fashion program profession based on INQF and the business/industries sectors ; And (3) to know result the curriculum of clothing expertise based on INQF and the business/industries sector. The research method chosen in developing curriculum based on INQFand business/industry sector is using by 4-D model from Thiagarajan, which includes: (1) define; (2) design; (3) development; And (4) disseminate. Step 4, not done but in this study. The result of the research shows that: (1) the curriculum based on INQF and the business/industries sector is the curriculum created by applying the principles and procedures of the Indonesian National Qualification Framework (INQF) that will improve the quality of graduates of Vocational High School level 2, and establish cooperation with Business/industries as a guest teacher (counselor) in the

  6. Industrial demand-side management in Canada. In the market for competition

    International Nuclear Information System (INIS)

    Fleming, A.

    1995-01-01

    The requirement for demand-side management brought on by increased competitiveness, a consequence of the deregulation of Canadian electric utilities, was discussed. Options for demand-side management were presented. The effect of deregulation on making demand-side management and energy efficiency high priorities in industry was discussed. Coordinated efforts of Power Smart Inc. and utilities in promoting energy efficiency were claimed to be the key to the success of demand-side management in the electric power industry in Canada. Demand-side management programs were expected to enhance productivity of industry by maximizing the value of plant energy use, and by providing industrial customers with a higher level of customer service

  7. THE COMPETITIVENESS FACTORS OF INDUSTRIAL PARKS

    Directory of Open Access Journals (Sweden)

    Kóródi László

    2014-07-01

    Full Text Available 2013 Romania shows the bigger economic development than in the last years and increases the GDP by 3,5%, that was the most significant growth in the EU. The biggest contributing sector to this expansion is the industry. This sector contributed the most with 2,3% to this growth. The importance of the industry in a country’s development not only the Romania`s case, but for other economies too. More and more authors emphasise the importance of Industrial parks, they act as pull factors. The effects of the industrial placements like the industrial parks are multiple regarding a region’s development and competitiveness. The most of these benefits are well known already, but the competitiveness of the industrial parks is not a frequent theme, tough this will contribute to the competitiveness of the region. What are the basic and decisive factors that influence the final decision of the companies to choose a particular industrial park? While analysing the competitiveness factors of industrial parks I intend to emphasize the reasons and factors that influences companies in their decision to appear in the industrial parks that they are resident in. The purpose of this paper is to present all the important factors in the same place that make an industrial park competitive. First I want to present the factors that were identified by now based on theoretical, and practical experiences starting from some second hand information. The caracteristics of the successful parks will br presented with the well-kown examples, and also with caese not known to everybody. Some of the reasons why industrial companies chooses a park are well kown, for example the placement, the good accesibility, for which is essential a good infrastructure. Another decisive factor is the suport of the state and the local autorities, the most important factors are tax and other costs relief. There are more things that influance companies in choosing their sites.

  8. 75 FR 67047 - Standard for the Flammability of Mattresses and Mattress Pads

    Science.gov (United States)

    2010-11-01

    ... upholstery fabric manufacturers. Response: As discussed in greater detail in the preliminary regulatory... Environmental Quality regulations and CPSC procedures for environmental review, the Commission has assessed the...

  9. Italy at CERN – Industrial exibition

    CERN Multimedia

    FP Department

    2011-01-01

    From 10 to 13 October 2011 Industrial Exhibition Bldg 500 & 61 Nineteen companies will present their latest technology at the industrial exhibition “Italy at CERN”. Italian industry will exhibit products and technologies which are related to the field of particle physics. Individual interviews will take place at either the companies’ exhibition stands or in the Main Building’s conference rooms. The firms will contact relevant users/technicians but any user wishing to make contact with a particular firm is welcome to use the contact details which are available from each secretariat of department or to get in touch with Karine ROBERT. You will find below the list of exhibitors.   LISTE DES EXPOSANTS : Agilent Technologies - via Varian 54 - 10040 Leinì (TO) http://www.agilent.com/chem/vacuum Pioneer in vacuum technology since the 50’s. CAEN S.p.A. - via Vetraia, 11 – 55049 Viareggio (LU) http://www.caen.it/ Data-Acquisi...

  10. Estimating the economic impact of tourism industry through the MM approach

    Directory of Open Access Journals (Sweden)

    SOCCI Claudio

    2017-01-01

    Full Text Available Tourism is one of the fastest growing industries in Italy and has proven to be a valuable source of economic prosperity. The main issue emerging when measuring the impact of tourism is that tourism is usually considered as a specific industry while in most applied situations it shows traits of a complex and structured economic activity characterized by a blend of different industries. We will identify the relationship among the various industries making up the complex economic activity usually referred as the “tourism industry”. This is done through the application of the multisectoral analysis to the Italian case. The evaluation of tourism in terms of economic policy is performed through the definition of an index of interaction among industries.

  11. Dynamic operational risk management at industrial irradiation plants

    International Nuclear Information System (INIS)

    Wieland, Patricia; Lustosa, Leonardo J.

    2010-01-01

    Although feasibility studies indicate that industrial irradiation can be sound business, some initiatives fail in few years. In Brazil, the operation of some industrial irradiation plants has been discontinued in spite of the growing export market for tropical fruits like mangoes and papayas, of which Brazil is one of the major producers. This paper discusses the overall aspects of the food irradiation in Brazil, singles out dynamic operation risk management as an important need and provides suggestions for further developments. This research work involves literature review as well as interviews with irradiation industry stake holders in order to identify the ORs and to assess the situation in a logical and integrated way. The results show that public acceptance is not a major issue for the food preservation industry in Brazil. On the contrary, evidences show that there is public support, provided that information on the subject is disseminated among consumers. Need for improvements have been detected in the areas of industrial operational risk management, external relations for export, and regulatory issues, among others to support decision making in establishing and developing industrial food irradiation capabilities to serve Brazilian tropical fruit exports. (author)

  12. Targeting heat recovery and reuse in industrial zone

    Directory of Open Access Journals (Sweden)

    Zarić Milana M.

    2017-01-01

    Full Text Available In order to reduce the usage of fossil fuels in industrial sectors by meeting the requirements of production processes, new heat integration and heat recovery approaches are developed. The goal of this study is to develop an approach to increase energy efficiency of an industrial zone by recovering and reusing waste heat via indirect heat integration. Industrial zones usually consist of multiple independent plants, where each plant is supplied by an independent utility system, as a decentralized system. In this study, a new approach is developed to target minimum energy requirements where an industrial zone would be supplied by a centralized utility system instead of decentralized utility system. The approach assumes that all process plants in an industrial zone are linked through the central utility system. This method is formulated as a linear programming problem (LP. Moreover, the proposed method may be used for decision making related to energy integration strategy of an industrial zone. In addition, the proposed method was applied on a case study. The results revealed that saving of fossil fuel could be achieved. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. OI172063

  13. Electricity conflicts. Self-conception and strategic action of the electricity industry between politics, industry, the environment and the public (1970-1989)

    International Nuclear Information System (INIS)

    Erhardt, Hendrik

    2017-01-01

    The energy industry has undergone a fundamental transformation process over the past 50 years. The author examines in this study the beginnings and challenges of this process since the 1970s on the basis of previously unevaluated corporate and association sources. For the areas of energy demand, industry and the environment and the public, the author analyzes the behavior of the electricity industry, which since the 1970s has been moving between persistence and change pressure. What leeway did the companies have in these three areas? How did the energy suppliers' actions shape the German energy system? And how did their actions change their image in public? These questions the changes in the energy industry have so far neither been scientifically adequately investigated nor adequately reflected by the actors themselves. The results of the work thus make an important contribution to the analysis of the beginnings the energy transition. [de

  14. Prospects for revitalization of the U.S. nuclear energy industry

    International Nuclear Information System (INIS)

    Colvin, Joe F.

    1998-01-01

    Today I want to make two key points about the U.S. nuclear energy industry. First, key policy issues are beginning to converge in a way that is very positive for our industry - and for society as a whole. And Second, the industry has worked hard to prepare for the future - and we are ready to make the most of these positive developments. Nuclear energy's prospects are the brightest they have been at any time in history. The plan identifies the building blocks that must be in place before utilities start building the next generation of nuclear plants. One, we wanted to improve the efficiency and reliability of our operating nuclear plants. Two, we wanted to establish a regulatory framework for license renewal. Three, we wanted to develop a more efficient licensing process for new plants. In closing, I am confident that the 21st century will bring a renaissance for nuclear energy-in the United States and around the world. The U.S. nuclear energy industry has a renewed vitality and sense of mission today. We've worked hard preparing for the future- and we will continue to be strong players in worldwide energy policy development in the 21st century. (Cho, G. S.)

  15. QUALITY OF HUMAN RESOURCES IN THE CONSTRUCTION INDUSTRY

    Directory of Open Access Journals (Sweden)

    Sofronov Daniil Sergeevich

    2012-10-01

    Full Text Available Human resources serve as the basis for development of the national economy, as a whole, and the construction industry, as its constituent part. The problem of inferior labor productivity within the framework of the national economy and its construction industry is considered in the paper. The author has identified the reasons why the productivity of the national economy and its construction industry is low. Low quality manpower is one of the reasons. Analysis of the statistical information has proven that the quality of the manpower in the construction industry is unsatisfactory. The author has also analyzed the relation between the construction industry development pattern and the quality of the manpower. Low manpower quality is a consequence of low personnel training and development expenditures assumed by local construction companies, if compared to the same assumed in the developed economies. Russian businesses do not invest any proceeds into their employees, as any employee may leave the company at any moment, and the employer will lose the investment. Therefore, the performance rate of the Russian construction industry cannot catch up with its western counterpart. The author also provides the analysis of the western personnel development concept. The author also makes his suggestions designated to reverse the unfavourable trend of the construction industry.

  16. Industrial waste utilization for foam concrete

    Science.gov (United States)

    Krishnan, Gokul; Anand, K. B.

    2018-02-01

    Foam concrete is an emerging and useful construction material - basically a cement based slurry with at least 10% of mix volume as foam. The mix usually containing cement, filler (usually sand) and foam, have fresh densities ranging from 400kg/m3 to 1600kg/m3. One of the main drawbacks of foam concrete is the large consumption of fine sand as filler material. Usage of different solid industrial wastes as fillers in foam concrete can reduce the usage of fine river sand significantly and make the work economic and eco-friendly. This paper aims to investigate to what extent industrial wastes such as bottom ash and quarry dust can be utilized for making foam concrete. Foam generated using protein based agent was used for preparing and optimizing (fresh state properties). Investigation to find the influence of design density and air-void characteristics on the foam concrete strength shows higher strength for bottom ash mixes due to finer air void distribution. Setting characteristics of various mix compositions are also studied and adoption of Class C flyash as filler demonstrated capability of faster setting.

  17. Research on Technology Innovation of China's NEV Industry Based on Patent Analysis

    DEFF Research Database (Denmark)

    Wang, Jingyu; Liu, Yingqi; Kokko, Ari

    2016-01-01

    Purpose/Significance: The development of Chinas new energy vehicle(NEV) industry is concerned by both the government and enterprises. Method/Process: Based on the patent data, this paper conducts a deep analysis on the technology innovation of Chinas NEV industry from three perspectives- the year...... distribution of the patent, the distribution of the patent applicants and the distribution of patent technology area. Then, the paper makes further correlation analysis on the NEV industry chain and the patent data. Result/Conclusion: In general,the paper comprehensively reflects the whole picture of Chinas...... NEV industry technology innovation and gives some ideas for its further development....

  18. Designing human-robot collaborations in industry 4.0: explorative case studies

    DEFF Research Database (Denmark)

    Kadir, Bzhwen A; Broberg, Ole; Souza da Conceição, Carolina

    2018-01-01

    We are experiencing an increase in human-robot interactions and the use of collaborative robots (cobots) in industrial work systems. To make full use of cobots, it is essential to understand emerging challenges and opportunities. In this paper, we analyse three successful industrial case studies...... of cobots’ implementation. We highlight the top three challenges and opportunities, from the empirical evidence, relate them to current available literature on the topic, and use them to identify key design factor to consider when designing industrial work system with human-robot collaborations....

  19. Deforestation and greenhouse gas emissions associated with fuelwood consumption of the brick making industry in Sudan

    International Nuclear Information System (INIS)

    Alam, Syed Ashraful; Starr, Mike

    2009-01-01

    The study focuses on the role of the fired clay brick making industry (BMI) on deforestation and greenhouse gas (GHG) emissions in Sudan. The BMI is based on numerous kilns that use biomass fuel, mainly wood which is largely harvested unsustainably. This results in potential deforestation and land degradation. Fuelwood consumption data was collected using interviews and questionnaires from 25 BMI enterprises in three administrative regions, namely Khartoum, Kassala and Gezira. Annual fuelwood consumption data (t dm yr -1 ) was converted into harvested biomass (m 3 ) using a wood density value of 0.65 t dm m -3 . For annual GHG estimations, the methodological approach outlined by the Intergovernmental Panel on Climate Change (IPCC) was used. According to our results, the annual deforestation associated with the BMI for the whole of Sudan is 508.4 x 10 3 m 3 of wood biomass, including 267.6 x 10 3 m 3 round wood and 240.8 x 10 3 m 3 branches and small trees. Total GHG emissions from the Sudanese BMI are estimated at 378 028 t CO 2 , 15 554 t CO, 1778 t CH 4 , 442 t NO X , 288 t NO and 12 t N 2 O per annum. The combined CO 2 -equivalent (global warming potential for 100-year time horizon) of the GHG emissions (excluding NO X and NO) is 455 666 t yr -1 . While these emissions form only a small part of Sudan's total GHG emissions, the associated deforestation and land degradation is of concern and effort should be made for greater use of sustainable forest resources and management

  20. Acceptability, acceptance and decision making

    International Nuclear Information System (INIS)

    Ackerschott, H.

    2002-01-01

    There is a fundamental difference between the acceptability of a civilizatory or societal risk and the acceptability of the decision-making process that leads to a civilizatory or societal risk. The analysis of individual risk decisions - regarding who, executes when which indisputably hazardous, unhealthy or dangerous behaviour under which circumstances - is not helpful in finding solutions for the political decisions at hand in Germany concerning nuclear energy in particular or energy in general. The debt for implementation of any technology, in the sense of making the technology a success in terms of broad acceptance and general utilisation, lies with the particular industry involved. Regardless of the technology, innovation research identifies the implementation phase as most critical to the success of any innovation. In this sense, nuclear technology is at best still an innovation, because the implementation has not yet been completed. Fear and opposition to innovation are ubiquitous. Even the economy - which is often described as 'rational' - is full of this resistance. Innovation has an impact on the pivotal point between stability, the presupposition for the successful execution of decisions already taken and instability, which includes insecurity, but is also necessary for the success of further development. By definition, innovations are beyond our sphere of experience; not at the level of reliability and trust yet to come. Yet they are evaluated via the simplifying heuristics for making decisions proven not only to be necessary and useful, but also accurate in the familiar. The 'settlement of the debt of implementation', the accompanying communication, the decision-making procedures concerning the regulation of averse effects of the technology, but also the tailoring of the new technology or service itself must be directed to appropriate target groups. But the group often aimed at in the nuclear debate, the group, which largely determines political

  1. Information Services of Maritime Industry

    Science.gov (United States)

    Palazov, Atanas; Stefanov, Asen

    2015-04-01

    The ultimate goal of modern oceanography is an end user oriented product. Beneficiaries are the governmental services, coast-based enterprises and research institutions that make use of the products generated by operational oceanography. Direct potential users and customers are coastal managers, shipping, offshore industry, ports and harbours, fishing, tourism and recreation industry, and scientific community. Indirect beneficiaries, through climate forecasting based on ocean observations, are food, energy, water and medical suppliers. Five general classes of users for data and information are specified: (1) operational users that analyze the collected data and produce different forecasts serving to impose regulation measures; (2) authorities and managers of large-scale projects needing timely oceanographic information, including statistics and climatic trends; (3) industrial enterprises, safety of structures and avoiding of pollution; (4) tourism and recreation related users aiming protection of human health; (5) scientists, engineers, and economists carrying out special researches, strategic design studies, and other investigations to advance the application of marine data. The analysis of information received during the extensive inquiry among all potential end users reveals variety of data and information needs encompassing physical, chemical, biological and hydrometeorological observation. Nevertheless, the common requirement concerns development of observing and forecasting systems providing accurate real-time or near-real time data and information supporting decision making and environmental management. Availability of updated information on the actual state as well as forecast for the future changes of marine environment are essential for the success and safety of maritime operations in the offshore industry. For this purpose different systems have been developed to collect data and to produce forecasts on the state of the marine environment and to provide

  2. Evaluating service quality in the Durban freight transportation industry

    Directory of Open Access Journals (Sweden)

    Jeevarathnam P. Govender

    2011-11-01

    Full Text Available This paper evaluates service quality in the Durban freight transportation industry, in which a high degree of competition exists. Previous measurements of service quality in the industry have been casual gauges, rather than a formalised process. This paper makes a contribution by examining the level of service quality, specifically from a tangibles, reliability and responsiveness perspective, thereby identifying service quality gaps which need to be closed, with a view to raising service quality levels in the industry. The SERVQUAL instrument has been used to measure service quality levels administered to 500 of the industry’s active customers, i.e. organisations utilising the services of the freight transportation industry. The targeted respondents were managers responsible for logistics in their organisations. It was found that gaps existed between expectations and perceptions of service quality on 14 of the 15 measured items. Recommendations are made as to how the industry can improve its service quality levels.

  3. Holding Government Accountable: Tobacco Policy Making in California, 1995-1997

    OpenAIRE

    Balbach, Edith D. Ph.D.; Monardi, Fred M. Ph.D.; Fox, Brion J. J.D.; Glantz, Stanton A. Ph.D.

    1997-01-01

    January 1, 1996 through May 31, 1997 was an active period for tobacco policy making in California. The fight in Spring, 1996, over the allocation of Proposition 99 revenues was more public and aggressive than it had been in the past, an increased level of public scrutiny was brought to bear on the implementation of the media campaign, the state of California’s failure to sue the tobacco industry for recovery of medical costs became a political issue, and the tobacco industry continued to give...

  4. ENABLING SMART MANUFACTURING TECHNOLOGIES FOR DECISION-MAKING SUPPORT

    Science.gov (United States)

    Helu, Moneer; Libes, Don; Lubell, Joshua; Lyons, Kevin; Morris, KC

    2017-01-01

    Smart manufacturing combines advanced manufacturing capabilities and digital technologies throughout the product lifecycle. These technologies can provide decision-making support to manufacturers through improved monitoring, analysis, modeling, and simulation that generate more and better intelligence about manufacturing systems. However, challenges and barriers have impeded the adoption of smart manufacturing technologies. To begin to address this need, this paper defines requirements for data-driven decision making in manufacturing based on a generalized description of decision making. Using these requirements, we then focus on identifying key barriers that prevent the development and use of data-driven decision making in industry as well as examples of technologies and standards that have the potential to overcome these barriers. The goal of this research is to promote a common understanding among the manufacturing community that can enable standardization efforts and innovation needed to continue adoption and use of smart manufacturing technologies. PMID:28649678

  5. The need for simulation in complex industrial systems

    Directory of Open Access Journals (Sweden)

    Aboura Khalid

    2012-10-01

    Full Text Available We discuss the concept of simulation and its application in the resolution of problems in complex industrial systems. Most problems of serious scale, be it an inventory problem, a production and distribution problem, a management of resources or process improvement, all real world problems require a mix of generic, data algorithmic and Ad-hoc solutions making the best of available information. We describe two projects in which analytical solutions were applied or contemplated. The first case study uses linear programming in the optimal allocation of advertising resources by a major internet service provider. The second study, in a series of projects, analyses options for the expansion of the production and distribution network of mining products, as part of a sensitive strategic business review. Using the examples, we make the case for the need of simulation in complex industrial problems where analytical solutions may be attempted but where the size and complexity of the problem forces a Monte Carlo approach.

  6. Using Vision Metrology System for Quality Control in Automotive Industries

    Science.gov (United States)

    Mostofi, N.; Samadzadegan, F.; Roohy, Sh.; Nozari, M.

    2012-07-01

    The need of more accurate measurements in different stages of industrial applications, such as designing, producing, installation, and etc., is the main reason of encouraging the industry deputy in using of industrial Photogrammetry (Vision Metrology System). With respect to the main advantages of Photogrammetric methods, such as greater economy, high level of automation, capability of noncontact measurement, more flexibility and high accuracy, a good competition occurred between this method and other industrial traditional methods. With respect to the industries that make objects using a main reference model without having any mathematical model of it, main problem of producers is the evaluation of the production line. This problem will be so complicated when both reference and product object just as a physical object is available and comparison of them will be possible with direct measurement. In such case, producers make fixtures fitting reference with limited accuracy. In practical reports sometimes available precision is not better than millimetres. We used a non-metric high resolution digital camera for this investigation and the case study that studied in this paper is a chassis of automobile. In this research, a stable photogrammetric network designed for measuring the industrial object (Both Reference and Product) and then by using the Bundle Adjustment and Self-Calibration methods, differences between the Reference and Product object achieved. These differences will be useful for the producer to improve the production work flow and bringing more accurate products. Results of this research, demonstrate the high potential of proposed method in industrial fields. Presented results prove high efficiency and reliability of this method using RMSE criteria. Achieved RMSE for this case study is smaller than 200 microns that shows the fact of high capability of implemented approach.

  7. USING VISION METROLOGY SYSTEM FOR QUALITY CONTROL IN AUTOMOTIVE INDUSTRIES

    Directory of Open Access Journals (Sweden)

    N. Mostofi

    2012-07-01

    Full Text Available The need of more accurate measurements in different stages of industrial applications, such as designing, producing, installation, and etc., is the main reason of encouraging the industry deputy in using of industrial Photogrammetry (Vision Metrology System. With respect to the main advantages of Photogrammetric methods, such as greater economy, high level of automation, capability of noncontact measurement, more flexibility and high accuracy, a good competition occurred between this method and other industrial traditional methods. With respect to the industries that make objects using a main reference model without having any mathematical model of it, main problem of producers is the evaluation of the production line. This problem will be so complicated when both reference and product object just as a physical object is available and comparison of them will be possible with direct measurement. In such case, producers make fixtures fitting reference with limited accuracy. In practical reports sometimes available precision is not better than millimetres. We used a non-metric high resolution digital camera for this investigation and the case study that studied in this paper is a chassis of automobile. In this research, a stable photogrammetric network designed for measuring the industrial object (Both Reference and Product and then by using the Bundle Adjustment and Self-Calibration methods, differences between the Reference and Product object achieved. These differences will be useful for the producer to improve the production work flow and bringing more accurate products. Results of this research, demonstrate the high potential of proposed method in industrial fields. Presented results prove high efficiency and reliability of this method using RMSE criteria. Achieved RMSE for this case study is smaller than 200 microns that shows the fact of high capability of implemented approach.

  8. Practical use of ergonomics in industrial processes

    International Nuclear Information System (INIS)

    1976-01-01

    Six lectures deal with new developments in the application of ergonomic knowledge, in particular to nuclear technology. All contributions have in common the aspects of analysis and structure of man-machine-systems in which human operators have to process information and have to make decisions. Quoting a lot of examples from a variety of industrial sectors, the article discusses complexes of problems and ways of solving them concerning questions requiring the answer 'yes' or 'no', concerning the dialogue man-computer, the organization of central control mechanisms, the avoidance of human errors, influence of man on system safety, and the rational incorporation of ergonomics in system planning. This publication is meant to be a contribution to extend the knowledge on the organization of work from an ergonomic and engineer/psychological point of view. It is to show how the knowledge of the nature of man can be applied as a systems component in order to make industrial processes safer and more economical, and to entrust man with purposeful and satisfying tasks. (orig./LN) [de

  9. VIOLENCE TO WOMEN IN ENTERTAINMANT INDUSTRY and MEDIA: MUSIC PERFORMER BERGEN EXAMPLE

    OpenAIRE

    Mihalis KUYUCU

    2014-01-01

    The aim of this paper is to make emphasize how the traditional printed media use violence to woman on the example of music performer Bergen. Women are mostly regarded with their sexuality more than their artistic performance in entertainment industry. In music industry which is a part of entertainment industry women face violence, discrimination and abuse in their carrier, These things sometimes can cost to the life of a woman. In this search the music performer Bergen and the violence that s...

  10. Feasibility study of utilizing solar furnace technology in steel making industry

    Energy Technology Data Exchange (ETDEWEB)

    Abbaspoursani, K. [The Faculty of Mechanical Engineering, Takestan Islamic Azad University (Iran, Islamic Republic of)], Email: a.abbaspour@tiau.ac.ir; Tofigh, A.A.; Nahang Toudeshki, S.; Hadadian, A. [Department of Energy, Materials and Energy Research Center (Iran, Islamic Republic of)], Email: Ali.A.Tofigh@gmail.com, email: toudeshki@hotmail.com, email: Arash.Hadadian@gmail.com; Farahmandpour, B. [Iranian Fuel Conservation company (Iran, Islamic Republic of)], Email: farahmandpour@gmail.com

    2011-07-01

    In Iran, the casting industry consumes 33.6% of electricity production, and most of this electricity is used in the melting process. Currently, scrap preheating is done using electric arc furnaces and the aim of this study is to assess the feasibility of replacing electric arc furnaces with solar furnaces. The performance of solar furnaces in the Iran Alloy Steel Company under Yazd climate conditions was studied. It was found that the solar irradiation time and solar insulation are sufficient to operate a solar furnace with the capacity to preheat 250 thousand tons per year of scrap to 500 degrees celsius. Results showed that such a furnace would decrease energy consumption by 40 GWh per year and that it would take 5 years to return the investment. This study demonstrated that operating a solar furnace in the Iran Alloy Steel Company under Yazd climate conditions is feasible and would result in economic and environmental benefits.

  11. New market strategies in the automotive industry

    Directory of Open Access Journals (Sweden)

    Kokić Miljko

    2006-01-01

    Full Text Available The world automotive industry has about 30% of excessive capacity. Regardless of that, the new plants are being constantly built. The countries of the East Europe, China and India are selected as suitable areas by almost all world leading car manufactures to build their additional plants in order to make profits. An open world market is subject to an uncompromising striving for each customer. Our manufacturers have to meet the same requirements if want to offer their products in the world market. Finding out of foreign strategic partners is the fastest way to recover a domestic automotive industry and to increase an employment rate.

  12. Importance of foreign investors for Russian power industry in prospect of energy revolution

    OpenAIRE

    Yaroslava N. Zubkova

    2017-01-01

    The article discusses current state of Russian electric power industry and the main problems of its development in the future of global energy revolution, which will lead to a significant increase in share of renewable energy in global production and consumption of energy and use of industrial energy storage, and will make it possible to change the structure of the industry and significantly reduce electricity prices. Traditional energy generation displacement by renewables associated with em...

  13. Analysis of Alcohol Industry Submissions against Marketing Regulation

    Science.gov (United States)

    Martino, Florentine Petronella; Miller, Peter Graeme; Coomber, Kerri; Hancock, Linda; Kypri, Kypros

    2017-01-01

    A growing body of literature points to the role of vested interests as a barrier to the implementation of effective public health policies. Corporate political activity by the alcohol industry is commonly used to influence policy and regulation. It is important for policy makers to be able to critique alcohol industry claims opposed to improved alcohol marketing regulation. The Australian National Preventive Health Agency reviewed alcohol marketing regulations in 2012 and stakeholders were invited to comment on them. In this study we used thematic analysis to examine submissions from the Australian alcohol industry, based on a system previously developed in relation to tobacco industry corporate political activity. The results show that submissions were a direct lobbying tactic, making claims to government that were contrary to the evidence-base. Five main frames were identified, in which the alcohol industry claimed that increased regulation: (1) is unnecessary; (2) is not backed up by sufficient evidence; (3) will lead to unintended negative consequences; and (4) faces legal barriers to implementation; underpinned by the view (5) that the industry consists of socially responsible companies working toward reducing harmful drinking. In contrast with tobacco industry submissions on public policy, which often focused on legal and economic barriers, the Australian alcohol industry placed a heavier emphasis on notions of regulatory redundancy and insufficient evidence. This may reflect differences in where these industries sit on the ‘regulatory pyramid’, alcohol being less regulated than tobacco. PMID:28118411

  14. Analysis of Alcohol Industry Submissions against Marketing Regulation.

    Directory of Open Access Journals (Sweden)

    Florentine Petronella Martino

    Full Text Available A growing body of literature points to the role of vested interests as a barrier to the implementation of effective public health policies. Corporate political activity by the alcohol industry is commonly used to influence policy and regulation. It is important for policy makers to be able to critique alcohol industry claims opposed to improved alcohol marketing regulation. The Australian National Preventive Health Agency reviewed alcohol marketing regulations in 2012 and stakeholders were invited to comment on them. In this study we used thematic analysis to examine submissions from the Australian alcohol industry, based on a system previously developed in relation to tobacco industry corporate political activity. The results show that submissions were a direct lobbying tactic, making claims to government that were contrary to the evidence-base. Five main frames were identified, in which the alcohol industry claimed that increased regulation: (1 is unnecessary; (2 is not backed up by sufficient evidence; (3 will lead to unintended negative consequences; and (4 faces legal barriers to implementation; underpinned by the view (5 that the industry consists of socially responsible companies working toward reducing harmful drinking. In contrast with tobacco industry submissions on public policy, which often focused on legal and economic barriers, the Australian alcohol industry placed a heavier emphasis on notions of regulatory redundancy and insufficient evidence. This may reflect differences in where these industries sit on the 'regulatory pyramid', alcohol being less regulated than tobacco.

  15. Analysis of Alcohol Industry Submissions against Marketing Regulation.

    Science.gov (United States)

    Martino, Florentine Petronella; Miller, Peter Graeme; Coomber, Kerri; Hancock, Linda; Kypri, Kypros

    2017-01-01

    A growing body of literature points to the role of vested interests as a barrier to the implementation of effective public health policies. Corporate political activity by the alcohol industry is commonly used to influence policy and regulation. It is important for policy makers to be able to critique alcohol industry claims opposed to improved alcohol marketing regulation. The Australian National Preventive Health Agency reviewed alcohol marketing regulations in 2012 and stakeholders were invited to comment on them. In this study we used thematic analysis to examine submissions from the Australian alcohol industry, based on a system previously developed in relation to tobacco industry corporate political activity. The results show that submissions were a direct lobbying tactic, making claims to government that were contrary to the evidence-base. Five main frames were identified, in which the alcohol industry claimed that increased regulation: (1) is unnecessary; (2) is not backed up by sufficient evidence; (3) will lead to unintended negative consequences; and (4) faces legal barriers to implementation; underpinned by the view (5) that the industry consists of socially responsible companies working toward reducing harmful drinking. In contrast with tobacco industry submissions on public policy, which often focused on legal and economic barriers, the Australian alcohol industry placed a heavier emphasis on notions of regulatory redundancy and insufficient evidence. This may reflect differences in where these industries sit on the 'regulatory pyramid', alcohol being less regulated than tobacco.

  16. Road to excellence through industry self-management

    International Nuclear Information System (INIS)

    Miller, J.H. Jr.

    1985-01-01

    In March 1984, nuclear utilities in the US took the initiative to make regulations in management and people-related areas unnecessary, as such regulations would interfere with our ability to manage ourselves. Such an initiative is the Nuclear Utility Management and Human Resources Committee (NUMARC), which was formed because the authors believe the electric utility industry is best capable of managing itself. NUMARC works with the US Nuclear Regulatory Commission (NRC) and its staff to develop a new approach to improving management and people-related areas of nuclear plant operation. In a recent NRC policy statement on training and qualification, the NRC recognized that the industry, through the initiatives of NUMARC and the Institute of Nuclear Power Operations (INPO), has made progress in developing programs to improve nuclear utility training and personnel qualification. It also recognized the importance of the industry's initiative and encouraged further self-improvement. The NRC stated it will refrain from new rulemaking in the area of training for a minimum of 2 yr, while monitoring industry efforts

  17. Optimising decision making in mastitis control

    OpenAIRE

    Down, P.M.

    2016-01-01

    Mastitis remains one of the most common diseases of dairy cows and represents a large economic loss to the industry as well as a considerable welfare issue to the cows affected. Decisions are routinely made about the treatment and control of mastitis despite evidence being sparse regarding the likely consequences in terms of clinical efficacy and return on investment. The aim of this thesis was to enhance decision making around the treatment and prevention of mastitis using probabilistic meth...

  18. Decision support model for selecting and evaluating suppliers in the construction industry

    Directory of Open Access Journals (Sweden)

    Fernando Schramm

    2012-12-01

    Full Text Available A structured evaluation of the construction industry's suppliers, considering aspects which make their quality and credibility evident, can be a strategic tool to manage this specific supply chain. This study proposes a multi-criteria decision model for suppliers' selection from the construction industry, as well as an efficient evaluation procedure for the selected suppliers. The model is based on SMARTER (Simple Multi-Attribute Rating Technique Exploiting Ranking method and its main contribution is a new approach to structure the process of suppliers' selection, establishing explicit strategic policies on which the company management system relied to make the suppliers selection. This model was applied to a Civil Construction Company in Brazil and the main results demonstrate the efficiency of the proposed model. This study allowed the development of an approach to Construction Industry which was able to provide a better relationship among its managers, suppliers and partners.

  19. Toward the next fiber optic revolution and decision making in the oil and gas industry

    NARCIS (Netherlands)

    Cheng, L.K.; Boering, M.; Braal, F.M.

    2013-01-01

    Fiber optic data transmission has caused revolutionary developments in the current information society. It was also an eye opener for the Oil & Gas industry when fiber optic-based Distributed Temperature Sensing was introduced in the nineties. Temperature profiles over the entire length of the

  20. Public Awareness of and Contact With Physicians Who Receive Industry Payments: A National Survey.

    Science.gov (United States)

    Pham-Kanter, Genevieve; Mello, Michelle M; Lehmann, Lisa Soleymani; Campbell, Eric G; Carpenter, Daniel

    2017-07-01

    The Physician Payments Sunshine Act, part of the Affordable Care Act, requires pharmaceutical and medical device firms to report payments they make to physicians and, through its Open Payments program, makes this information publicly available. To establish estimates of the exposure of the American patient population to physicians who accept industry payments, to compare these population-based estimates to physician-based estimates of industry contact, and to investigate Americans' awareness of industry payments. Cross-sectional survey conducted in late September and early October 2014, with data linkage of respondents' physicians to Open Payments data. A total of 3542 adults drawn from a large, nationally representative household panel. Respondents' contact with physicians reported in Open Payments to have received industry payments; respondents' awareness that physicians receive payments from industry and that payment information is publicly available; respondents' knowledge of whether their own physician received industry payments. Among the 1987 respondents who could be matched to a specific physician, 65% saw a physician who had received an industry payment during the previous 12 months. This population-based estimate of exposure to industry contact is much higher than physician-based estimates from the same period, which indicate that 41% of physicians received an industry payment. Across the six most frequently visited specialties, patient contact with physicians who had received an industry payment ranged from 60 to 85%; the percentage of physicians with industry contact in these specialties was much lower (35-56%). Only 12% of survey respondents knew that payment information was publicly available, and only 5% knew whether their own doctor had received payments. Patients' contact with physicians who receive industry payments is more prevalent than physician-based measures of industry contact would suggest. Very few Americans know whether their own doctor