WorldWideScience

Sample records for matter technical support

  1. Inclusion of products of physicochemical oxidation of organic wastes in matter recycling of biological-technical life support systems.

    Science.gov (United States)

    Tikhomirov, Alexander A.; Kudenko, Yurii; Trifonov, Sergei; Ushakova, Sofya

    Inclusion of products of human and plant wastes' `wet' incineration in 22 medium using alter-nating current into matter recycling of biological-technical life support system (BTLSS) has been considered. Fluid and gaseous components have been shown to be the products of such processing. In particular, the final product contained all necessary for plant cultivation nitrogen forms: NO2, NO3, NH4+. As the base solution included urine than NH4+ form dominated. At human solid wastes' mineralization NO2 NH4+ were registered in approximately equal amount. Comparative analysis of mineral composition of oxidized human wastes' and standard Knop solutions has been carried out. On the grounds of that analysis the dilution methods of solutions prepared with addition of oxidized human wastes for their further use for plant irrigation have been suggested. Reasonable levels of wheat productivity cultivated at use of given solutions have been obtained. CO2, N2 and O2 have been determined to be the main gas components of the gas admixture emitted within the given process. These gases easily integrate in matter recycling process of closed ecosystem. The data of plants' cultivation feasibility in the atmosphere obtained after closing of gas loop including physicochemical facility and vegetation chamber with plants-representatives of LSS phototrophic unit has been received. Conclusion of advance research on creation of matter recycling process in the integrated physical-chemical-biological model system has been drawn.

  2. Technical Support Essentials Advice to Succeed in Technical Support

    CERN Document Server

    Sanchez, Andrew

    2010-01-01

    Technical Support Essentials is a book about the many facets of technical support. It attempts to provide a wide array of topics to serve as points of improvement, discussion, or simply topics that you might want to learn. The topics range from good work habits to the way technical supportgroups establish their own style of work. This book applies theories, models, and concepts synthesized from existing research in other fields-such as management, economics, leadership, and psychology-and connects them to technical support. The goal is to build on the work of others and allow their success to

  3. ERLN Technical Support for Labs

    Science.gov (United States)

    The Environmental Response Laboratory Network provides policies and guidance on lab and data requirements, Standardized Analytical Methods, and technical support for water and radiological sampling and analysis

  4. Engineering Technical Support Center (ETSC)

    Science.gov (United States)

    ETSC is EPA’s technical support and resource centers responsible for providing specialized scientific and engineering support to decision-makers in the Agency’s ten regional offices, states, communities, and local businesses.

  5. System for technical innovation support

    International Nuclear Information System (INIS)

    2011-08-01

    This book lists field of support system, which includes tax, development work, basic research project, industrial technology, information and communications field, energy field, part and materials field, local industry, the small and medium business such as technical development field, and industry-university collaboration like summary of investment and financing support and guarantee, support of manpower such as brain pool and contact Korea, support of technique like development technology and strategy for patent, support on certification such as company and technical goods, purchase support.

  6. Technical support and emergency centre

    International Nuclear Information System (INIS)

    Bohun, L.; Kapisovsk y, M.

    1997-01-01

    This paper presents technical support and emergency management center which will be on two places: Mochovce NPP Emergency Centre (Technical support center and Support working center) and Reserve Emergency Centre in Levice (Reserve emergency center and Environmental Evaluation Center). The main aims of the emergency management centers are: the management and coordination of all persons and organisations; provision of the all information needed to evaluation of the accident and its mitigation; continuous evaluation of the potential or real radiological consequences; taking measure for an early notification of the governmental bodies and the organizations, warning and protection of the public; and other aims. In the next part the data for technical support and emergency centre are discussed

  7. Technology, safety and costs of decommissioning a refernce boiling water reactor power station: Technical support for decommissioning matters related to preparation of the final decommissioning rule

    International Nuclear Information System (INIS)

    Konzek, G.J.; Smith, R.I.

    1988-07-01

    Preparation of the final Decommissioning Rule by the Nuclear Regulatory Commission (NRC) staff has been assisted by Pacific Northwest Laboratory (PNL) staff familiar with decommissioning matters. These efforts have included updating previous cost estimates developed during the series of studies of conceptually decommissioning reference licensed nuclear facilities for inclusion in the Final Generic Environmental Impact Statement (FGEIS) on decommissioning; documenting the cost updates; evaluating the cost and dose impacts of post-TMI-2 backfits on decommissioning; developing a revised scaling formula for estimating decommissioning costs for reactor plants different in size from the reference boiling water reactor (BWR) described in the earlier study; and defining a formula for adjusting current cost estimates to reflect future escalation in labor, materials, and waste disposal costs. This report presents the results of recent PNL studies to provide supporting information in three areas concerning decommissioning of the reference BWR: updating the previous cost estimates to January 1986 dollars; assessing the cost and dose impacts of post-TMI-2 backfits; and developing a scaling formula for plants different in size than the reference plant and an escalation formula for adjusting current cost estimates for future escalation

  8. Technology, safety and costs of decommissioning a reference pressurized water reactor power station: Technical support for decommissioning matters related to preparation of the final decommissioning rule

    International Nuclear Information System (INIS)

    Konzek, G.J.; Smith, R.I.

    1988-07-01

    Preparation of the final Decommissioning Rule by the Nuclear Regulatory Commission (NRC) staff has been assisted by Pacific Northwest Laboratory (PNL) staff familiar with decommissioning matters. These efforts have included updating previous cost estimates developed during the series of studies on conceptually decommissioning reference licensed nuclear facilities for inclusion in the Final Generic Environmental Impact Statement (FGEIS) on decommissioning; documenting the cost updates; evaluating the cost and dose impacts of post-TMI-2 backfits on decommissioning; developing a revised scaling formula for estimating decommissioning costs for reactor plants different in size from the reference pressurized water reactor (PWR) described in the earlier study; defining a formula for adjusting current cost estimates to reflect future escalation in labor, materials, and waste disposal costs; and completing a study of recent PWR steam generator replacements to determine realistic estimates for time, costs and doses associated with steam generator removal during decommissioning. This report presents the results of recent PNL studies to provide supporting information in four areas concerning decommissioning of the reference PWR: updating the previous cost estimates to January 1986 dollars; assessing the cost and dose impacts of post-TMI-2 backfits; assessing the cost and dose impacts of recent steam generator replacements; and developing a scaling formula for plants different in size than the reference plant and an escalation formula for adjusting current cost estimates for future escalation

  9. Technical support non-SLB(GCDF)

    International Nuclear Information System (INIS)

    DePoorter, G.L.; Burton, B.W.

    1982-01-01

    The Los Alamos National Laboratory is providing technical support for the Greater Confinement Demonstration Facility (GCDF) at the Nevada Test Site. This technical support consists of computer modeling of the GCDF, design and emplacement of a Shallow Test Plot at NTS, and instrument testing at Los Alamos. Results to date on the computer modeling and the Shallow Test Plot are described

  10. Nuclear Power Plant Temelin Technical Support Centre

    International Nuclear Information System (INIS)

    Krizek, K.

    2000-01-01

    The erection of the Technical Support Centre for the Nuclear Power Plant Temelin has been a relatively sophisticated and costly issue. It was by proper use of the existing systems, as e.g. I and C, ISE and other systems, that a robust system has been created that is able to meet any requirements laid on the performance of the Technical Support Centre. The decision of the utility CEZ, a.s. that made it possible to establish the Technical Support Centre at the Nuclear Power Plant Temelin has been a right step which shows the level of safety culture within the utility. (author)

  11. USACE AIS Transmit Technical Support Summary Report

    Science.gov (United States)

    2014-09-01

    the TAG block for the correct transmitters, and then send to the USACE AIS network. B. Outbound openings in the USCG firewall for the USCG Message...USACE AIS Transmit Technical Support Summary Report Distribution Statement A: Approved for public release; distribution is unlimited...September 2014 Report No. CD-D-09-15 USACE AIS Transmit Technical Support Summary Report ii UNCLAS//Public | CG-926 RDC | I. Gonin et al. Public

  12. Three Mile Island accident technical support

    International Nuclear Information System (INIS)

    Long, R.L.; Crimmins, T.M.; Lowe, W.W.

    1981-01-01

    A large number of technical support personnel were required to respond to the Three Mile Island Unit 2 (TMI-2) accident of March 28, 1979. Under the leadership of General Public Utilities personnel, onsite (round-the-clock shift) technical support began the evening of March 29 and within a week the TMI Recovery Organization incorporated all of the essential technical capability to implement the Base Plan for Cooldown, manage the radioactive waste problem, and begin the steps toward long-range plant recovery. These steps toward recovery are described in some detail. 1 refs

  13. Technical supports for nuclear control

    Energy Technology Data Exchange (ETDEWEB)

    An, Jong Sung; Kwak, Eun Hoh; Noh, Sung Kee; Soh, Dong Sub; Yoon, Wan Kee; Shin, Jang Soo; Paek, Dae Hyun; Park, Wan Soo; Kim, Hyun Tae; Park, Chan Sik; Cha, Hong Yul; Choi, Yoon Dong; Park, Jin Hoh; Lee, Eui Jin; An, Jin Soo; Kim, Jong Heui [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1994-12-01

    The project was carried out to support the establishment of the system of accountancy and control of nuclear materials in Korea. The training of inspectors and seminar were held to improve inspection capability of the nuclear inspectors. The information about the north Korean nuclear activities were successfully analyzed. In the drafts of nuclear energy law the national inspection and the regulation of physical protection were newly introduced for the purpose to clarify the openness of nuclear activities in Korea. 1 fig, 20 tabs, 19 refs. (Author).

  14. Engineering Technical Support Center Annual Report Fiscal ...

    Science.gov (United States)

    The United States Environmental Protection Agency (EPA or Agency) Office of Research and Development (ORD) created the Engineering Technical Support Center (ETSC) in 1987, one of several technical support centers created as part of the Technical Support Project (TSP). ETSC provides engineering expertise to Agency program and regional offices and remediation teams working at contaminated sites across the country. The ETSC is operated within ORD’s Land Remediation and Pollution Control Division (LRPCD) of the National Risk Management Research Laboratory (NRMRL) in Cincinnati, Ohio. The ETSC’s mission is to provide site-specific scientific and engineering technical support to Remedial Project Managers, On-Scene Coordinators, and other remediation personnel at contaminated sites. This allows local, regional, or national authorities to work more quickly, efficiently, and cost effectively, while also increasing the technical experience of the remediation team. Since its inception, the ETSC has supported countless projects across all EPA Regions in almost all states and territories. This report highlights significant projects the ETSC supported in fiscal year 2015 (FY15). These projects addressed an array of environmental scenarios, such as remote mining contamination, expansive landfill waste, cumulative impacts from multiple contamination sources, and persistent threats from abandoned industrial sites. Constructing and testing new and innovative treatment technol

  15. Technical Support and Transfer of Geothrmal Technical Knowledge and Information

    Energy Technology Data Exchange (ETDEWEB)

    John W. Lund; Toni" Boyd

    2007-11-14

    The Geo-Heat Center (GHC) staff provided responses to 1442 technical support requests during the contract period (April 1, 2006 to September 30, 2007), which were six quarters under this contract. Our website, consisting of 1900 files, also contributes to our technical assistance activity. Downloaded files were 1,889,323 (3,448 per day) from our website, the total number of users was 1,365,258 (2,491 per day), and the total number of hits were 6,008,500 (10,064 per day). The GHC staff attended 60 workshops, short course and professional meeting and made 29 technical presentations. The staff also prepared and mailed out 2,000 copies of each of five issues of the GHC Quaterly Bulletin which contained 26 articles. We also mailed out approximately 5,000 papers and publications to interested individuals and organizations.

  16. Yucca Mountain Climate Technical Support Representative

    International Nuclear Information System (INIS)

    Sharpe, Saxon E

    2007-01-01

    The primary objective of Project Activity ORD-FY04-012, 'Yucca Mountain Climate Technical Support Representative', was to provide the Office of Civilian Radioactive Waste Management (OCRWM) with expertise on past, present, and future climate scenarios and to support the technical elements of the Yucca Mountain Project (YMP) climate program. The Climate Technical Support Representative was to explain, defend, and interpret the YMP climate program to the various audiences during Site Recommendation and License Application. This technical support representative was to support DOE management in the preparation and review of documents, and to participate in comment response for the Final Environmental Impact Statement, the Site Recommendation Hearings, the NRC Sufficiency Comments, and other forums as designated by DOE management. Because the activity was terminated 12 months early and experience a 27% reduction in budget, it was not possible to complete all components of the tasks as originally envisioned. Activities not completed include the qualification of climate datasets and the production of a qualified technical report. The following final report is an unqualified summary of the activities that were completed given the reduced time and funding

  17. ICT in supporting Nuclear Malaysia as National Technical Support Organization

    International Nuclear Information System (INIS)

    Saaidi Ismail; Siti Nurbahyah Hamdan; Mohd Fauzi Haris

    2011-01-01

    Information and communication technology (ICT) services are basic requirements in any organization during this information age. ICT is proven as a powerful enabler in organization due to its unique characteristics that improve communication, collaboration, and the exchange of information to strengthen and create new economic and social networks. As Malaysian Nuclear Agency is moving towards Technical Support Organization (TSO), the importance of ICT cannot simply be ignored. Being a TSO for national Nuclear Power Plant (NPP), Nuclear Malaysia is responsible for providing the technical and scientific basis for decisions and activities regarding nuclear technology and radiation safety. As a TSO, Nuclear Malaysia should utilize and collaborate data and information available from it activities and programs and use it to expedite the implementation of national NPP. Technical support also responsible to contribute an excellent operation by providing technical inputs and support for optimizing NPP component (such as plant procedures, operation and maintenance, technical assistance, training etc). These tasks can be performed more effectively and efficiently with the help of appropriate ICT services and solution. Therefore, the deployment and implementation of appropriate ICT requirement shall be made to fulfill agency needs. As initial step, existing ICT facilities should be reassessed. This is because the capacity of existing ICT services is very limited in terms of manpower, infrastructure, and applications. This paper however, will briefly discuss only to the requirement gap on existing ICT manpower and infrastructure with the requirement needed for TSO. The facts then will be used to improve ICT manpower and infrastructure in Nuclear Malaysia to provide reliable and high availability of technical support for national NPP. (author)

  18. Improving technical support to IAEA safeguards

    International Nuclear Information System (INIS)

    Rundquist, D.

    1986-01-01

    Changes present new safeguards challenges and require that the entire safeguards process become more efficient. A development process has evolved at the Agency that aids in matching appropriate technology to the needs, primarily through the mechanism of voluntary Member States Support Programme, which gives IAEA access to many of the worlds finest nuclear laboratories. The function of these programs is discussed in this article with particular emphasis on the Agency's co-ordination role. Besides a description of the Member States Support Programme the problems involved (coordination and communication aspects) as well as the results achieved are indicated. The support is categorized under the following headlines: 1) Information and expertise; 2) Instrumentation, methods and techniques; 3) Training; 4) Test and calibration facilities. As mentioned in the article Member States also benefit from the Support Programme. Other means of technical support such as multi-national co-operation programmes and bilateral research agreements are mentioned

  19. Quark Matter 2017: Young Scientist Support

    Energy Technology Data Exchange (ETDEWEB)

    Evdokimov, Olga [University of Illinois at Chicago

    2017-07-31

    Quark Matter conference series are amongst the major scientific events for the Relativistic Heavy Ion community. With over 30 year long history, the meetings are held about every 1½ years to showcase the progress made in theoretical and experimental studies of nuclear matter under extreme conditions. The 26th International Conference on Ultra-relativistic Nucleus-Nucleus Collisions (Quark Matter 2017) was held at the Hyatt Regency Hotel in downtown Chicago from Sunday, February 5th through Saturday, February 11th, 2017. The conference featured about 180 plenary and parallel presentations of the most significant recent results in the field, a poster session for additional presentations, and an evening public lecture. Following the tradition of previous Quark Matter meetings, the first day of the conference was dedicated entirely to a special program for young scientists (graduate students and postdoctoral researchers). This grant will provided financial support for 235 young physicists facilitating their attendance of the conference.

  20. Protecting safeguards information / Division of technical support

    International Nuclear Information System (INIS)

    2002-01-01

    This DVD contains two films representing the key aspects of the IAEA Department of Safeguards. 'Protecting Safeguards Information' is a narrative/fiction film which presents the Agency's information handling and protection measures. A security representative from a fictional nation receives a briefing on the procedures and methods used by the Department. These techniques will assure member states that the information they provide to the Agency is kept safe and confidential. 'Division of Technical Support' is a non-fiction documentary which presents a detailed look at the technical capabilities and management techniques used by the Agency in nuclear material accountancy. The film covers many aspects of safeguards equipment and techniques including: NDA and DA instruments, seals, surveillance, training, development and maintenance. Taken together, these films provide an introduction and overview to many important aspects of the IAEA Department of Safeguards. (IAEA)

  1. Technical support for nuclear power operations

    International Nuclear Information System (INIS)

    1999-04-01

    This report prepared by the group of senior experts from nuclear operating organizations in Member states, addresses the problem of improving the operating performance of nuclear power plants. Safe and reliable operation is essential for strengthening the viability of nuclear power in the increasingly competitive market of electric power. Basic principles and requirements concerning technical procedures and developed practices are discussed. Report reflects the best current international practices and presents those management initiatives that go beyond the mandated regulatory compliance and could lead to enhancement od operational safety and improved plant performance. By correlating experiences and presenting collective effective practices it is meant to assist nuclear power plant managers in achieving improvement in operation through the contribution of effective technical support

  2. Hanford sitewide grounwater remediation - supporting technical information

    International Nuclear Information System (INIS)

    Chiaramonte, G.R.

    1996-05-01

    The Hanford Sitewide Groundwater Remediation Strategy was issued in 1995 to establish overall goals for groundwater remediation on the Hanford Site. This strategy is being refined to provide more detailed justification for remediation of specific plumes and to provide a decision process for long-range planning of remediation activities. Supporting this work is a comprehensive modeling study to predict movement of the major site plumes over the next 200 years to help plan the remediation efforts. The information resulting from these studies will be documented in a revision to the Strategy and the Hanford Site Groundwater Protection Management Plan. To support the modeling work and other studies being performed to refine the strategy, this supporting technical information report has been produced to compile all of the relevant technical information collected to date on the Hanford Site groundwater contaminant plumes. The primary information in the report relates to conceptualization of the source terms and available history of groundwater transport, and description of the contaminant plumes. The primary information in the report relates to conceptualization of the source terms and available history of groundwater transport, description of the contaminant plumes, rate of movement based on the conceptual model and monitoring data, risk assessment, treatability study information, and current approach for plume remediation

  3. Technical Support for the development of DCS

    International Nuclear Information System (INIS)

    Oh, In Seok; Lee, Cheol Kwon; Kim, Dong Hoon; Kim, Jung Taek; Hwang, In Koo; Park, Jae Chang; Lee, Dong Young; Park, Won Man

    2008-05-01

    The objective of this project is to provide a technical support to Woori Tech Co. in its design and manufacture process of the DCS as a part of KNICS development program to promote the technology self-reliance for non-safety equipment for NPPs(Nuclear Power Plants). We support Woori Tech Co. to develop a DCS which satisfies the requirements for Shinkori 3 and 4 NPPs in the aspects of reliability, applicability and technical competitiveness. As the results of this project the following items were developed and/or implemented; · Design basis and requirements for a DCS system · Design requirements for control communication networks · Architecture of control networks · Design requirements of EWS(Engineering Workstation) · Plan of software verification and validation · Operation display design · Soft control functions · Application development tools of DCS · Analysis and V/V activities on DCS control network protocols · Software verification and validation and documentation guidelines · User manual documents

  4. Technical Support for the development of DCS

    Energy Technology Data Exchange (ETDEWEB)

    Oh, In Seok; Lee, Cheol Kwon; Kim, Dong Hoon; Kim, Jung Taek; Hwang, In Koo; Park, Jae Chang; Lee, Dong Young; Park, Won Man

    2008-05-15

    The objective of this project is to provide a technical support to Woori Tech Co. in its design and manufacture process of the DCS as a part of KNICS development program to promote the technology self-reliance for non-safety equipment for NPPs(Nuclear Power Plants). We support Woori Tech Co. to develop a DCS which satisfies the requirements for Shinkori 3 and 4 NPPs in the aspects of reliability, applicability and technical competitiveness. As the results of this project the following items were developed and/or implemented; {center_dot} Design basis and requirements for a DCS system {center_dot} Design requirements for control communication networks {center_dot} Architecture of control networks {center_dot} Design requirements of EWS(Engineering Workstation) {center_dot} Plan of software verification and validation {center_dot} Operation display design {center_dot} Soft control functions {center_dot} Application development tools of DCS {center_dot} Analysis and V/V activities on DCS control network protocols {center_dot} Software verification and validation and documentation guidelines {center_dot} User manual documents.

  5. Impact of Technical Support on Customer Satisfaction

    Directory of Open Access Journals (Sweden)

    Natasa Gajic

    2015-10-01

    Full Text Available Technical support through co-creation of value in automotive paint processes and activities is essential to the success of paint manufacturing companies. This study aimed to explore the impact of technical support on customer satisfaction through value-in-use in the automotive paint market. A quantitative questionnaire survey involving a convenience sample of 169 respondents was used for data collection. The questionnaire design bore on the SERVPERF instrument with embedded value-in-use attributes. The data were analyzed by using SPSS 21 statistical methods exploratory factor analysis (EFA and multiple regression analysis (MRA. The findings of this study revealed that the key value-in-use attributes were relationship quality (trust, knowledge required for providing help in getting maximum product benefits, sharing of knowledge, and a range of product and service offerings that satisfy customer needs. Trust had the greatest impact on customer satisfaction. The results also revealed that service quality dimension assurance exerted the greatest positive impact on customer satisfaction.

  6. Engineering Technical Support Center Annual Report Fiscal Year 2015

    Science.gov (United States)

    The United States Environmental Protection Agency (EPA or Agency) Office of Research and Development (ORD) created the Engineering Technical Support Center (ETSC) in 1987, one of several technical support centers created as part of the Technical Support Project (TSP). ETSC provid...

  7. Software Package for the Technical Support Centre

    International Nuclear Information System (INIS)

    Tomisa, T.; Skanata, D.; Sucic, B.

    2002-01-01

    The continued radiological surveillance system has been technically improved during the last two years by establishing 11 new automatic stations, so that there are currently 14 locations with installed gamma-monitors for air radiation monitoring on the Croatian national territory. Given that the original system had been designed primarily for gathering data for off-line treatment with the purpose of statistical analyses, the contemporary Radiological Early Warning System (SPRU) approach has demanded developing of a new software by the Technical Support Centre (TPC) in order to allow operators interactive work in the case of emergency situations. The outcome of this development is a software package called DORAP (Automatic Radiological Station Remote Reading), which brings together automatic functions of continual data gathering, daily production of the standard report, distribution of the report by fax, SMS (Short Message Service), SMT (Simple Mail Transfer) and FTP (File Transfer Protocol) as well as generation and distribution of alarms in the case of failure in the system or exceeding of the set radiation intensity values. (author)

  8. Technical and organizational support for the operator

    International Nuclear Information System (INIS)

    Harrison, J.R.; Prescott, W.

    1981-01-01

    The requirement for staff and facilities on- and off-site to provide technical support to the plant personnel in normal and under accident conditions has been highlighted over the past 18 months as part of the post-TMI investigations. In the Central Electricity Generating Board (CEGB) considerable attention has always been paid to these requirements but naturally the experience of TMI has led to a review of the existing arrangements to determine whether any improvements and modifications were advisable. Similarly, the CEGB has always paid particular attention to the development of an appropriate emergency plant covering both the on-site damage control activities and off-site evacuation procedures consistent with the demography of the particular site being considered. An important aspect of gaining confidence in the potential success of the emergency plan is the regular practice and exercising of individual parts of the plan and its totality, and full attention is given also to these aspects. The paper reviews in some detail the ways in which the CEGB has met the requirements for the different aspects enumerated above, and will trace the approaches which have developed in the training and practices in respect of accident procedures. (author)

  9. Technical support for universal health coverage pilots in Karnataka ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Technical support for universal health coverage pilots in Karnataka and Kerala. This project will provide evidence-based support to implement universal health coverage (UHC) pilot activities in two Indian states: Kerala and Karnataka. The project team will provide technical assistance to these early adopter states to assist ...

  10. The technical support organization at BNL is twenty years old

    International Nuclear Information System (INIS)

    Indusi, J.P.

    1988-01-01

    The Technical Support Organization was established by the Atomic Energy Commission in January 1968 at Brookhaven National Laboratory (BNL). The original idea came from a small group of scientists at BNL. The group included Willy Higinbotham, Herb Kouts, Frank Miles, Richard Dodson, and Gerhardt Friedlander. The AEC endorsed the idea of a technical support group to provide technical assistance to AEC's Office of Safeguards and Materials Management and they sent requests for expressions of interest throughout the complex. For a number of reasons, to be discussed in the paper, the Technical Support Organization was established at BNL. An early project was the Conceptual Design for Safeguarding Nuclear Material which formed the first logical and systematic description of the integration of several elements into a safeguards system for protecting nuclear materials. Many other projects were undertaken over the years. TSO today provides technical assistance to the DOE Office of Safeguards and Secuirty, the Office of Classification and Technology Policy, and the Office of Security Evaluations. Technical support to the IAEA is provided under the Program of Technical Assistance to Agency Safeguards (POTAS). Recently, TSO began a program of technical assistance to the Air Force Weapons Laboratory in the area of nuclear systems security

  11. Draft federal GHG accounting and reporting : technical support document

    Science.gov (United States)

    2010-07-01

    This is a technical support document (TSD) that accompanies the Federal Greenhouse Gas Accounting and Reporting Guidance (or Guidance). This document provides detailed information on the inventory reporting process and accepted calculation methodolog...

  12. AHMCT Intelligent Roadway Information System (IRIS) technical support and testing

    Science.gov (United States)

    2011-12-31

    This report documents the research project AHMCT IRIS Technical Support and Testing, : performed under contract 65A0275, Task ID 1777. It presents an overview of the Intelligent : Roadway Information System (IRIS), and its design and function. ...

  13. Needs, requirements and challenges for technical support to nuclear safety authority

    International Nuclear Information System (INIS)

    Madonna, A.; Orsini, G.

    2010-01-01

    To face the very broad range of technical matters on which the regulatory and licensing activity are based, and related research and development activity, the Nuclear Safety Authorities (NSA) may need to rely upon external technical and scientific support. In providing technical support to NSA, the experience shows, from one side, the importance to have technical support organizations (TSO) with recognized competence, independence and appropriate regulatory view, and from the other side, the importance to have within the NSAs well developed management and technical capability to address, coordinate and use the results of the external technical support. Retaining the NSA the full responsibility for the final decision. Under which conditions and modus operandi the external support shall be provided in order to comply with requirements of being independent, competent and timely provided, fulfilling the administrative procedures, is the subject of attention and consideration of TSO function today. The Italian regulatory body is currently going to be institutionally re-established according to new law approved in 2009 /1/ and it needs to be resourced and fully organized with necessary capacities in the nearest future. The perspective of a new nuclear program, recently launched by the government, with significant incoming tasks for regulation and licensing, against the existing limited resources, let foresee a substantial potential need for technical support and advice. ITER-Consult (Ltd), created in 2003 in Italy, has well developed capabilities to provide independent technical evaluation and support to NSAs, to maintain safety culture and updated knowledge, to transfer know how and to establish international cooperation and networking. This mission is guided assuming as values the independence, the professional competence, the transparency, the credibility and the establishment of respectful relationship with the partners. Challenges exist for funding and operational

  14. City Reach Code Technical Support Document

    Energy Technology Data Exchange (ETDEWEB)

    Athalye, Rahul A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chen, Yan [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhang, Jian [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Liu, Bing [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Frankel, Mark [New Buildings Inst., Portland, OR (United States); Lyles, Mark [New Buildings Inst., Portland, OR (United States)

    2017-10-31

    This report describes and analyzes a set of energy efficiency measures that will save 20% energy over ASHRAE Standard 90.1-2013. The measures will be used to formulate a Reach Code for cities aiming to go beyond national model energy codes. A coalition of U.S. cities together with other stakeholders wanted to facilitate the development of voluntary guidelines and standards that can be implemented in stages at the city level to improve building energy efficiency. The coalition's efforts are being supported by the U.S. Department of Energy via Pacific Northwest National Laboratory (PNNL) and in collaboration with the New Buildings Institute.

  15. Integrated Project Control and Technical Support

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jun Yeon; Joo, Po Kook; Kim, Gye Ryung (and others)

    2003-06-15

    First, Since PEFP puts it's aim on technology innovation through collaboration and technological fusion among the subprojects from the various fields, It has been tried to make the subprojects consist with the goal of the whole project through building and running the integrated project control system. Also, adopting CPM(Critical Process Management), intensive process management framework has been founded. Secondly, for the every procedure, including purchase, building, installation and a trial running, license, quality control, etc., could be efficiently executed, every related task has been carried out. And, the tasks involved in international cooperative relationship and host site selection are carried out as well, so that PEFP could be firmly supported. Finally, TRM(Technology Road Map) is made up not only for the purpose of managing efficiency and effectiveness on the investment, but also for the purpose of life cycle management from developing stage to commercializing stage.

  16. Technical support and preparations for the response to radiological emergencies

    International Nuclear Information System (INIS)

    Cardenas H, J.; Ramos V, E.O.; Fernandez G, I.M.; Capote F, E.; Zerquera J, T.; Garcia L, O.; Lopez B, G.; Molina P, D.; Lamdrid B, A.I.; Benitez N, J.C.; Salgado M, M.; Lopez F, Y.; Jerez V, P.

    2006-01-01

    The work picks up the efforts directed to elevate the technical capacity of the answer in front of the radiological emergencies. Expressing them by means of the actions carried out as for teaching, research and development and intervention before accidental radiological events. The same one reflects the leading role of the participant institutions in those marks of the answer system to radiological emergencies that for its technical level it satisfies the national and international demands in the matter. In execution of the mentioned goals research projects guided to endow to the national system of methodologies and procedures for the administration of radiological emergencies have been executed that favor the improvement of its technical and organizational capacities. As well as the postulates of the National Plan of Measures for Case of Catastrophes in the corresponding to radiological accidents. (Author)

  17. Integrated Project Control and Technical Support

    International Nuclear Information System (INIS)

    Kim, Jun Yeon; Kim, Jun Yeon; Joo, Po Kook and others

    2005-08-01

    First, Since PEFP puts it's aim on technology innovation through collaboration and technological fusion among the sub-projects from the various fields. It has been tried to make the sub-projects consist with the goal of the whole project through building and running the integrated project control system. Also, adopting CPM(Critical Process Management), intensive process management framework has been founded. Secondly, for the every procedure, including purchase, building, installation and a trial running, license, quality control, etc., could be efficiently executed, every related task has been carried out. And, the tasks involved in international cooperative relationship and host site selection are carried out as well, so that PEFP could be firmly supported. Finally, Strategic management procedures including TRM(Technology Road Map), economic evaluation on PEFP, preliminary evaluation on company-involved R and D and TRESIS(Technology, Resources, Economic Evaluation System) are made up not only for the purpose of managing efficiency and effectiveness on the investment, but also for the purpose of life cycle management from developing stage to commercializing stage

  18. Integrated Project Control and Technical Support

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jun Yeon; Kim, Jun Yeon; Joo, Po Kook and others

    2005-08-15

    First, Since PEFP puts it's aim on technology innovation through collaboration and technological fusion among the sub-projects from the various fields. It has been tried to make the sub-projects consist with the goal of the whole project through building and running the integrated project control system. Also, adopting CPM(Critical Process Management), intensive process management framework has been founded. Secondly, for the every procedure, including purchase, building, installation and a trial running, license, quality control, etc., could be efficiently executed, every related task has been carried out. And, the tasks involved in international cooperative relationship and host site selection are carried out as well, so that PEFP could be firmly supported. Finally, Strategic management procedures including TRM(Technology Road Map), economic evaluation on PEFP, preliminary evaluation on company-involved R and D and TRESIS(Technology, Resources, Economic Evaluation System) are made up not only for the purpose of managing efficiency and effectiveness on the investment, but also for the purpose of life cycle management from developing stage to commercializing stage.

  19. Logistic management materials-technical support railway enterprises

    OpenAIRE

    Dykan, V.; Borozenetc, T.

    2014-01-01

    The essence of logistics management. Determine the feasibility of applying the principles of logistics management in organizing the logistics of railway transport. Discussed measures to develop suppliers in the implementation of logistics management logistics. Identified the need to develop and implement regulatory and methodical system to improve materials-technical support through the introduction of modern logistics principles. Applied systemic campaign to organize the materials-technical ...

  20. Impact of the WHO Technical Support Towards Malaria Elimination ...

    African Journals Online (AJOL)

    Background: Zambia's National Malaria Strategic Plan (NMSP) 2011-2016 aims to eliminate malaria by the year 2020. The WHO Country Office is supporting Zambia in its goal to attain this national target earlier than the global goal contained in Global Technical Strategy (GTS) 2016- 2030. WHO's focus is to accelerate ...

  1. Technical and scientific support of nuclear power development in Belarus

    International Nuclear Information System (INIS)

    Mikhalevich, A.

    2007-01-01

    In the end of 1986 the construction of the first NPP in Belarus was stopped after Chernobyl accident but investigations in the nuclear field were continued. Recently the decision about nuclear power development has been accepted again. Therefore at present technical and scientific support of managerial, administrative and organisational decisions and activities in this sphere is of great importance. (author)

  2. Final technical report; Mercury Release from Organic matter (OM) and OM-Coated Mineral Surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Aiken, George

    2014-10-02

    This document is the final technical report for a project designed to address fundamental processes controlling the release of mercury from flood plain soils associated with East Fork Poplar Creek, Tennessee near the U.S. Department of Energy Oak Ridge facility. The report summarizes the activities, findings, presentations, and publications resulting from an award to the U.S. Geological that were part of a larger overall effort including Kathy Nagy (University of Illinois, Chicago, Ill) and Joseph Ryan (University of Colorado, Boulder, CO). The specific charge for the U.S.G.S. portion of the study was to provide analytical support for the larger group effort (Nagy and Ryan), especially with regard to analyses of Hg and dissolved organic matter, and to provide information about the release of mercury from the floodplain soils.

  3. Technical support and management systems for nuclear power stations

    International Nuclear Information System (INIS)

    Oya, Tadashi; Abe, Norihiko

    1990-01-01

    Sophisticated automatic monitoring and control capabilities and computerized operation management are needed in nuclear power plants to boost plant safety and availability and to reduce operating costs. The article covers the areas of operation management and maintenance management within the larger category of operational administration. The concept of technical administration support-that is, the use of computerization to support the on-site technician's operations-is introduced. The article also suggests the direction of future development. (author)

  4. Technical support organization of national regulators: Challenges and strategy

    International Nuclear Information System (INIS)

    Mallick, S.A.; Maqbul, N.; Kanwal, S.; Hashmi, J.A.

    2007-01-01

    Design, construction and operation of nuclear power plants has always been a complex activity and so is regulating the nuclear power plants. The rapid innovation in design of nuclear power plants with substantial increase in design life from 40 years to 60 years is now considered a norm. The public acceptability of nuclear as a clean source of energy is also on the increase but with this increase is also the demand for more safety against accidental release of radioactivity. It is therefore essential that high standards of nuclear and radiation safety should be maintained and applied all over the world. However the increase acceptability will also lead to a rapid growth in nuclear energy generation capacity both in terms of construction of new nuclear power plants as well as life extension of older nuclear power plants. This will result in an unprecedented pressure on the national regulators during the licensing process. Nuclear and radiation safety are based on technical, administrative and organizational provisions. There is, therefore, a need to separate the technical review and assessment work from the main licensing process by delegating this responsibility to the technical support organizations so that regulatory decision making is not driven by the time constraints imposed by the licensing process. The paper examines the role technical support organization can play to enhance quality of technical review and thereby the effectiveness of national regulators. For the national regulators that belong to countries that import nuclear power plants and may lack an advanced industrial infrastructure at par with other exporting countries, the establishment of technical support organization within a regulatory body or as a separate organization is gaining increased importance. Pakistan Nuclear Regulatory Authority (PNRA) has realized this importance and proposed the Government of Pakistan for allocation of Rs. 480.00 million ($ 8 million) for the establishment of

  5. Technical Support Section annual work plan for FY 1998

    Energy Technology Data Exchange (ETDEWEB)

    Adkisson, B.P.; Allison, K.L.; Effler, R.P.; Hess, R.A.; Keeble, T.A.; Odom, S.M.; Smelcer, D.R.

    1997-12-01

    The Technical Support Section (TSS) of the Instrumentation and Controls (I and C) Division of Oak Ridge National Laboratory (ORNL) provides technical services such as fabrication, modification, installation, calibration, operation, repair, and preventive maintenance of instruments and other related equipment. Because the activities and priorities of TSS must be adapted to the technical support needs of ORNL, the TSS Annual Work Plan is derived from, and is driven directly by, current trends in the budgets and activities of each ORNL division for which TSS provides support. Trends that will affect TSS planning during this period are reductions in the staffing levels of some R and D programs because of attrition or budget cuts. TSS does not have an annual budget to cover operating expenses incurred in providing instrument maintenance support to ORNL. Each year, TSS collects information concerning the projected funding levels of programs and facilities it supports. TSS workforce and resource projections are based on the information obtained and are weighted depending on the percentage of support provided to that division or program. Each year, TSS sets the standard hourly charge rate for the following fiscal year. The Long-Range Work Plan is based on estimates of the affects of the long-range priorities and directions of the Laboratory. Proposed new facilities and programs provide additional bases for long-range planning. After identifying long-range initiatives, TSS planning includes future training requirements, reevaluation of qualifications for new hires, and identification of essential test equipment that will be needed for new work.

  6. Game-based dynamic simulations supporting technical education and training

    Directory of Open Access Journals (Sweden)

    Tore Bjølseth

    2006-04-01

    Full Text Available Educational games may improve learning by taking advantage of the new knowledge and skills of today’s students obtained from extensive use of interactive games. This paper describes how interactive dynamic simulators of advanced technical systems and phenomena can be shaped and adapted as games and competitions supporting technical education and training. Some selected examples at different educational levels are shown, from vocational training to university level courses. The potential benefit and perceived learning effect of this approach is also described and underpinned from comprehensive user feedback.

  7. Cooperation of Russian and EU technical support organizations

    International Nuclear Information System (INIS)

    Kuznetsov, M.V.; Kozlov, Vl.V.; Kapralov, E.Yu.

    2007-01-01

    Since 1992, the fruitful collaboration of the Russian and Western-European technical support organizations (TSOs) is being continued due to the support of the European Commission. There are two main areas of activities. The first one is more of methodological assistance and enhancing RF TSOs capabilities to support Rostekhnadzor decision making process. Experience and knowledge acquired in this area projects increase RF TSOs capabilities regarding a wide spectrum of safety related issues assessment, in particular safety analyses, reactor vessel embrittlement, application of 'leak before break' concept, severe accident and accident management, fire risk evaluation, etc. The second area is focused on licensing related assessments of EC financed on site assistance projects (modernisations). This area projects promote implementation in Russia a licensing process based on a technical dialogue between operator and regulator as well contributes to transfer of Western practice in assessment of NPPs modernization. The improvement of managerial, scientific and technical capabilities of RF TSO experts may be considered as noteworthy and practical result of the TSOs cooperation. The continuation of such modality of RF and EU TSOs cooperation will be a good basis to cope with present and future challenges faced by TSOs in enhancing nuclear safety. (author)

  8. Background and technical studies for GENIUS as a dark matter experiment

    International Nuclear Information System (INIS)

    Baudis, L.; Heusser, G.; Majorovits, B.; Ramachers, Y.; Strecker, H.; Klapdor-Kleingrothaus, H.V.

    1999-01-01

    The GENIUS project is a proposal for a new dark matter detector, with an increased sensitivity of three orders of magnitude relative to existing direct dark matter detection experiments. We performed a technical study and calculated the main background sources for the relevant energy region in a detailed detector geometry. The achieved overall background level and detector performance confirm the outstanding potential of GENIUS as a powerful tool for the direct search of WIMPs in our Galaxy

  9. IAEA co-ordinated technical support programme to the NIS

    International Nuclear Information System (INIS)

    Olsen, R.; Murakami, K.; Blacker, C.; Sharma, S.K.

    1999-01-01

    With most Newly Independent States (NIS) of the former Soviet Union becoming parties to the Non-Proliferation Treaty as Non-Nuclear Weapon States, there has been an acute need in these states for considerable assistance for the establishment of the necessary structure and resources to ensure that their commitments to non-proliferation are fully implemented in a timely manner. A number of IAEA Member States have offered and are now providing assistance to the NIS on a bilateral level to set up an appropriate State System of Accounting and Control (SSAC) which includes Import/Export Control and Physical Protection of Nuclear Material in each state. The IAEA and these Member States established the Co-ordinated Technical Support Programme (CTSP) to ensure that the support given to the NIS was done in a co-ordinated and transparent manner and to avoid duplication of effort. The IAEA has played a coordinating role for the past 5 years by helping to identify detailed needs in individual States, by providing a platform for Member States to identify areas where they could provide the optimum support, and in developing and preparing the Co-ordinated Technical Support Plans. The IAEA organises annual meetings in Vienna attended by all donor and recipient countries to review the focus and implementation status of the co-ordinated technical support activities. A position statement is made by each donor and recipient country, and views and experiences are exchanged. The contents of the CTSPs and the role of the Agency in monitoring the progress of the individual tasks are reviewed in this paper. A summary comparing the implementation status of the Programme by each country is presented. (author)

  10. Technical and Scientific Support Organizations Providing Support to Regulatory Functions. Companion CD-ROM

    International Nuclear Information System (INIS)

    2018-01-01

    This publication introduces the general principles underlying the provision of technical and scientific support to a regulatory body and the characteristics of organizations providing such support. It describes the services provided to support regulatory functions as well as the associated activities and processes to maintain the needed level of expertise, state of the art tools and equipment. The publication is intended for use primarily by organizations that provide technical and scientific support in the field of nuclear and radiation safety. This also includes organizations that acquire such support, and regulatory bodies and governments, as they make decisions on the model of technical and scientific support to be developed at the national level, for example in the case of a country embarking on the development of a nuclear power programme. It is the first IAEA publication dedicated to the specific practices and challenges to be met by the technical and scientific support organizations. This CD-ROM includes the annexes to the printed publication of examples of TSOs and their interactions with key stakeholders.

  11. Mindset Matters: Supporting Student Persistence Through The Developmental Mathematics Pipeline

    OpenAIRE

    Kiser, Tracey Nicole

    2016-01-01

    Abstract of the DissertationMindset Matters: Supporting Student Persistence Through The Developmental Mathematics PipelinebyTracey Nicole KiserDoctor of Education in Teaching and LearningUniversity of California, San Diego, 2016Christopher P. Halter, ChairDevelopmental mathematics is one of the most challenging leaks in the mathematics K-20 pipeline. Few students enter two-year colleges prepared to successfully engage in college-level mathematics classes. Many of students who place into devel...

  12. (Technical and engineering support for the Office of Industrial Programs)

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    As of April 19, 1991, technical, operational and analytic support and assistance to the offices and divisions of the Office of Renewable Energy, under contract DE-AC01-86CE30844 was completed. The overall work effort, initiated February 20, 1986, was characterized by timely, comprehensive, high quality, professional responsiveness to a broad range of renewable energy program operational support requirements. These are no instances of failure to respond, nor unacceptable response, during the five-year period. The technology program areas covered are Solar Buildings Technology, Wind Energy Technology, Photovoltaic Energy Technology, Geothermal Energy Technology, Biofuels and Municipal Waste Technology, Solar Thermal Technology, Hydropower Energy Technology, Ocean Energy Technology, and Electric Energy Systems and Energy Storage. The analytical and managerial support provided to the office and staff of the Deputy Assistant Secretary for Renewable Energy enabled a comprehensive evaluation of program and policy alternatives, and the selection and execution of appropriate courses of action from amongst those alternatives. Largely through these means the Office has been able to maintain continuity and a meaningful program thrust through the vacillations of policies and budgets that it has experienced over that it has experienced over the past five years. Appended are summaries of support activities within each of the individual technology program areas, as well as a complete listing of all project deliverables and due-dates for each submittal under the contract.

  13. [Technical and engineering support for the Office of Industrial Programs

    International Nuclear Information System (INIS)

    1991-01-01

    As of April 19, 1991, technical, operational and analytic support and assistance to the offices and divisions of the Office of Renewable Energy, under contract DE-AC01-86CE30844 was completed. The overall work effort, initiated February 20, 1986, was characterized by timely, comprehensive, high quality, professional responsiveness to a broad range of renewable energy program operational support requirements. These are no instances of failure to respond, nor unacceptable response, during the five-year period. The technology program areas covered are Solar Buildings Technology, Wind Energy Technology, Photovoltaic Energy Technology, Geothermal Energy Technology, Biofuels and Municipal Waste Technology, Solar Thermal Technology, Hydropower Energy Technology, Ocean Energy Technology, and Electric Energy Systems and Energy Storage. The analytical and managerial support provided to the office and staff of the Deputy Assistant Secretary for Renewable Energy enabled a comprehensive evaluation of program and policy alternatives, and the selection and execution of appropriate courses of action from amongst those alternatives. Largely through these means the Office has been able to maintain continuity and a meaningful program thrust through the vacillations of policies and budgets that it has experienced over that it has experienced over the past five years. Appended are summaries of support activities within each of the individual technology program areas, as well as a complete listing of all project deliverables and due-dates for each submittal under the contract

  14. Large Hospital 50% Energy Savings: Technical Support Document

    Energy Technology Data Exchange (ETDEWEB)

    Bonnema, E.; Studer, D.; Parker, A.; Pless, S.; Torcellini, P.

    2010-09-01

    This Technical Support Document documents the technical analysis and design guidance for large hospitals to achieve whole-building energy savings of at least 50% over ANSI/ASHRAE/IESNA Standard 90.1-2004 and represents a step toward determining how to provide design guidance for aggressive energy savings targets. This report documents the modeling methods used to demonstrate that the design recommendations meet or exceed the 50% goal. EnergyPlus was used to model the predicted energy performance of the baseline and low-energy buildings to verify that 50% energy savings are achievable. Percent energy savings are based on a nominal minimally code-compliant building and whole-building, net site energy use intensity. The report defines architectural-program characteristics for typical large hospitals, thereby defining a prototype model; creates baseline energy models for each climate zone that are elaborations of the prototype models and are minimally compliant with Standard 90.1-2004; creates a list of energy design measures that can be applied to the prototype model to create low-energy models; uses industry feedback to strengthen inputs for baseline energy models and energy design measures; and simulates low-energy models for each climate zone to show that when the energy design measures are applied to the prototype model, 50% energy savings (or more) are achieved.

  15. Tools to support important technical decisions during accident conditions

    International Nuclear Information System (INIS)

    Tenschert, J.; Bergiers, C.

    2008-01-01

    To handle design basis and beyond design basis accidents with intact reactor core, Nuclear Power Plants are using Emergency Operating Procedures (EOP) that they may have developed based on the generic Westinghouse Emergency Response Guidelines. Even though the EOPs are very directive, some questions are left to external support, i.e. to a team of persons constituting the so-called Technical Support Center (TSC). The Pressurized Water Reactor Owner Group (PWROG, previously Westinghouse Owner Group, WOG) has developed a TSC manual to support this group in their decision making process. Because of the specific and particular design of the Beznau NPP (KKB) Safety Systems, development of a plant-specific TSC manual required a lot of additions compared to the generic material. This plant-specific TSC manual is a helpful tool for the Site Emergency Director (SED) of the KKB to better evaluate issues and potential concerns arising while executing the EOPs. The majority of considered issues are relevant for beyond design basis accidents and external events. (orig.)

  16. TECHNICAL SUPPORT AS A BASIS OF HIGH AVAILABILITY LEVEL AND IT SYSTEM SERVICE QUALITY

    Directory of Open Access Journals (Sweden)

    Dejan Vidojevic

    2007-06-01

    Full Text Available This work presents the development and implementation methodology of technical support in IT1system operation. Methodology is developed and applied in realistic system (Information system of the Tax administration - DIS 2003, which is technically very complex and highly distributed. The results of IT system availability assessment and identification of the critical components are input parameters in the process of establishing of the technical support. The importance of technical support for achieving optimal IT system availability and IT service quality is assessed according to its operation during one year. The history of technical support system operation is a basis for further continuous improvement.

  17. Technical Support Document: 50% Energy Savings for Small Office Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Thornton, Brian A.; Wang, Weimin; Huang, Yunzhi; Lane, Michael D.; Liu, Bing

    2010-04-30

    The Technical Support Document (TSD) for 50% energy savings in small office buildings documents the analysis and results for a recommended package of energy efficiency measures (EEMs) referred to as the advanced EEMs. These are changes to a building design that will reduce energy usage. The package of advanced EEMs achieves a minimum of 50% energy savings and a construction area weighted average energy savings of 56.6% over the ANSI/ASHRAE/IESNA Standard 90.1-2004 for 16 cities which represent the full range of climate zones in the United States. The 50% goal is for site energy usage reduction. The weighted average is based on data on the building area of construction in the various climate locations. Cost-effectiveness of the EEMs is determined showing an average simple payback of 6.7 years for all 16 climate locations. An alternative set of results is provided which includes a variable air volume HVAC system that achieves at least 50% energy savings in 7 of the 16 climate zones with a construction area weighted average savings of 48.5%. Other packages of EEMs may also achieve 50% energy savings; this report does not consider all alternatives but rather presents at least one way to reach the goal. Design teams using this TSD should follow an integrated design approach and utilize additional analysis to evaluate the specific conditions of a project.

  18. Multi-technical approach to characterize the dissolved organic matter from clay-stone

    International Nuclear Information System (INIS)

    Blanchart, Pascale; Michels, Raymond; Faure, Pierre; Parant, Stephane; Bruggeman, Christophe; De Craen, Mieke

    2012-01-01

    Document available in extended abstract form only. Currently, different clay formations (Boom Clay, Callovo-Oxfordian argilites, Opalinus Clay, Toarcian shales...) are studied as reference host rocks for methodological studies on the geological disposal of high-level and long-lived radioactive waste. While a significant effort is being done on the characterization of the mineral composition and the reactivity of the clays as barriers, the occurrence of organic matter, even in low proportion cannot be neglected. The organic matter appears as gas (C 1 -C 4 as identified in the Bure underground facilities), as solid (kerogen), as hydrocarbon liquids (free hydrocarbons within the kerogen or adsorbed on minerals) as well as in the aqueous phase (Dissolved Organic Matter - DOM). DOM raises specific interest, as it may have complexation properties towards metals and rare earth elements and is potentially mobile. Therefore, it is important to characterize the DOM as part of a study of feasibility of geological disposal. In this study, four host rocks were studied: - The Callovo-Oxfordian shales of Bure Underground Research Laboratory (Meuse, France); - The Opalinus Clay of Mont Terri Underground Research Laboratory (Switzerland); - The Toarcian shales of Tournemire (Aveyron, France); - The Boom Clay formation studied in The HADES Underground Research Laboratory (Mol, Belgium). Organic matter characteristics vary upon formation in terms of (i) origin (mainly marine type II; mixtures of marine type II and higher plants type III organic matter often poorly preserved), (ii) TOC contents, (iii) thermal maturity (for instance, Opalinus Clay and Toarcian shales are more mature and have poor oxygen content compare to Callovo-Oxfordian shales and Boom Clay). These differences in organic matter quality may have an influence on the quantity and the quality of DOM. The DOM of the rocks was isolated by Soxhlet extraction using pure water. A quantitative and qualitative multi-technical

  19. General Merchandise 50% Energy Savings Technical Support Document

    Energy Technology Data Exchange (ETDEWEB)

    Hale, E.; Leach, M.; Hirsch, A.; Torcellini, P.

    2009-09-01

    This report documents technical analysis for medium-box general merchandise stores aimed at providing design guidance that achieves whole-building energy savings of at least 50% over ASHRAE Standard 90.1-2004.

  20. Technical Support Document for Version 3.6.1 of the COMcheck Software

    Energy Technology Data Exchange (ETDEWEB)

    Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan; Halverson, Mark A.; Lucas, Robert G.; Richman, Eric E.; Schultz, Robert W.; Winiarski, David W.

    2009-09-29

    This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.

  1. Managing knowledge in technical and scientific support organizations

    International Nuclear Information System (INIS)

    Beraha, D.; Goetz, K.; Puhr-Westerheide. P.

    2007-01-01

    Full text: In an introduction, the issues in knowledge management regarding licensing and supervision authorities as well as technical and scientific support organisations (TSO's) will be discussed. Although in general many of these issues are quite similar across organizations in the nuclear field, specific questions arise according to the knowledge management policies in regulation and supervision, as will be demonstrated by discussing the results of a recent workshop on human resource management in regulation and safety. With the need for managing knowledge in regulation and safety, a further field of supporting authorities has been opened to TSO's. As a prerequisite, a good knowledge on knowledge management methods and tools has to be acquired by a TSO, preferably by installing an own knowledge management system, thus gaining the indispensable practical experience. Driven by the ongoing demographic change, some TSO's have started early with the implementation of knowledge management practices in their own organizations. Three examples will be presented in the paper concerning knowledge management in safety and regulation, illustrating the efforts undertaken at GRS, the BMU (German Federal Ministry of Environment, Nature Preservation and Reactor Safety), and the TUV-SUD. At GRS, knowledge management started by specifying the goals of maintaining knowledge, particularly of retiring experts, and transferring this knowledge to the next generation. In addition, the knowledge management methods should become an integral part of every day's work, thus ensuring the sustainability of the effort. Initially, a basis for handling and distributing information and documents was provided by setting up a portal with integrated document management capabilities. In a next step, work was concentrated on the core business process, namely project work. This has been achieved by providing an own portal site for each project where all information pertinent to the project such as

  2. Particulate Matter Filtration Design Considerations for Crewed Spacecraft Life Support Systems

    Science.gov (United States)

    Agui, Juan H.; Vijayakumar, R.; Perry, Jay L.

    2016-01-01

    Particulate matter filtration is a key component of crewed spacecraft cabin ventilation and life support system (LSS) architectures. The basic particulate matter filtration functional requirements as they relate to an exploration vehicle LSS architecture are presented. Particulate matter filtration concepts are reviewed and design considerations are discussed. A concept for a particulate matter filtration architecture suitable for exploration missions is presented. The conceptual architecture considers the results from developmental work and incorporates best practice design considerations.

  3. Technical Targets - A Tool to Support Strategic Planning in the Subsurface Contaminants Focus Area

    International Nuclear Information System (INIS)

    Looney, B.B.

    2002-01-01

    The Subsurface Contaminants Focus Area (SCFA) is supported by a lead laboratory consisting of technical representatives from DOE laboratories across the country. This broadly representative scientific group has developed and implemented a process to define Technical Targets to assist the SCFA in strategic planning and in managing their environmental research and development portfolio. At an initial meeting in Golden Colorado, an initial set of Technical Targets was identified using a rapid consensus based technical triage process. Thirteen Technical Targets were identified and described. Vital scientific and technical objectives were generated for each target. The targets generally fall into one of the following five strategic investment categories: Enhancing Environmental Stewardship, Eliminating Contaminant Sources, Isolating Contaminants, Controlling Contaminant Plumes, Enabling DOEs CleanUp Efforts. The resulting targets and the detail they comprise on what is, and what is not, needed to meet Environmental Management needs provide a comprehensive technically-based framework to assist in prioritizing future work and in managing the SCFA program

  4. Distance Education Programs: The Technical Support to Be Successful.

    Science.gov (United States)

    McNew, Ryan E; Gordon, Jeffry S; Weiner, Elizabeth E; Trangenstein, Patricia

    2016-01-01

    Academic success requires support on a variety of levels as well as access to contemporary tools and services. Supporting students enrolled in a successful higher education distance learning program, requires a strong, properly trained IT support staff in addition to a stable IT environment. Our distance education program began with a regional market but has grown significantly over the past few years. This is primarily due to the success of our distance education tools and support which have contributed to achieving a ranking of eleventh of best graduate schools in nursing according to the U.S. News and World Report. The entire student population is "Bring Your Own Devices" (BYOD). Critical to this support is the initial configuration and loading of needed software during the first week of orientation. All of this success requires a robust team of members prepared in a range of skill sets from networking to instructional design.

  5. Cooperation of technical support organizations of state nuclear regulatory committee of Ukraine in sip safety regulation

    International Nuclear Information System (INIS)

    Bikov, V.O.; Kyilochits'ka, T.P.; Bogorins'kij, P.; Vasil'chenko, V.M.; Kondrat'jev, S.M.; Smishlyajeva, S.P.; Troter, D.

    2002-01-01

    The main task of the technical support in the Shelter Implementation Plan (SIP) licensing process consists in Technical Evaluation of SIP projects and documents submitted by the Licensee to State Nuclear Regulatory Committee to substantiate the safety of Shelter-related work. The goal of this task is to evaluate the submitted materials whether they meet the requirements of nuclear and radiation safety

  6. 76 FR 66311 - Draft Documents To Support Submission of an Electronic Common Technical Document; Availability

    Science.gov (United States)

    2011-10-26

    ...] Draft Documents To Support Submission of an Electronic Common Technical Document; Availability AGENCY... making regulatory submissions in electronic format using the electronic Common Technical Document (eCTD....S. regional document type definition, version 3.0) and ``Comprehensive Table of Contents Headings...

  7. Engineering Technical Support Center Annual Report Fiscal Year 2016

    Science.gov (United States)

    This report highlights significant projects that the ETSC supported in fiscal year 2016. These projects have addressed an array of environmental scenarios, including, but not limited to remote mining contamination, expansive landfill waste, cumulative impacts from multiple contam...

  8. Impact of the WHO Technical Support Towards Malaria Elimination ...

    African Journals Online (AJOL)

    Background: Zambia's National Malaria Strategic Plan. (NMSP) 2011-2016 aims to ..... played a pivotal role in the formulation of joint plans in collaboration with MOH ... financial support (both domestic and external). This has seen the GRZ ...

  9. Technical Support Section Instrument Support Program for nuclear and nonnuclear facilities with safety requirements

    International Nuclear Information System (INIS)

    Adkisson, B.P.; Allison, K.L.

    1995-01-01

    This document describes requirements, procedures, and supervisory responsibilities of the Oak Ridge National Laboratory (ORNL) Instrumentation and Controls (I ampersand C) Division's Technical Support Section (TSS) for instrument surveillance and maintenance in nonreactor nuclear facilities having identified Operational Safety Requirements (OSRs) or Limiting Conditions Document (LCDs). Implementation of requirements comply with the requirements of U.S. Department of Energy (DOE) Orders 5480.5, 5480.22, and 5481.1B; Martin Marietta Energy Systems, Inc. (Energy Systems), Policy Procedure ESS-FS-201; and ORNL SPP X-ESH-15. OSRs and LCDs constitute an agreement or contract between DOE and the facility operating management regarding the safe operation of the facility. One basic difference between OSRs and LCDs is that violation of an OSR is considered a Category II occurrence, whereas violation of an LCD requirement is considered a Category III occurrence (see Energy Systems Standard ESS-OP-301 and ORNL SPP X-GP-13). OSRs are required for high- and moderate-hazard nuclear facilities, whereas the less-rigorous LCDs are required for low-hazard nuclear facilities and selected open-quotes generally acceptedclose quotes operations. Hazard classifications are determined through a hazard screening process, which each division conducts for its facilities

  10. RE/SPEC Inc. technical support to the Repository Technology Program

    International Nuclear Information System (INIS)

    Wagner, R.A.

    1992-06-01

    This report presents a summary of all RE/SPEC Inc. technical support activities to the Repository Technology Program (RTP) from September 1, 1988, through June 30, 1992. The RE/SPEC Inc. activities are grouped into the following categories: project management, project quality assurance (QA), performance assessment (PA), support of the Office of Civilian Radioactive Waste Management (OCRWM) through technical reviews and general assistance, participation in the Department of Energy (DOE) International Program, and code evaluation and documentation

  11. A Theory of Sex Differences in Technical Aptitude and Some Supporting Evidence.

    Science.gov (United States)

    Schmidt, Frank L

    2011-11-01

    In this article, I present a theory that explains the origin of sex differences in technical aptitudes. The theory takes as proven that there are no sex differences in general mental ability (GMA), and it postulates that sex differences in technical aptitude (TA) stem from differences in experience in technical areas, which is in turn based on sex differences in technical interests. Using a large data set, I tested and found support for four predictions made by this theory: (a) the construct level correlation between technical aptitude and GMA is larger for females than males, (b) the observed and true score variability of technical aptitude is greater among males than females, (c) at every level of GMA females have lower levels of technical aptitude, and (d) technical aptitude measures used as estimates of GMA for decision purposes would result in underestimation of GMA levels for girls and women. Given that GMA carries the weight of prediction of job performance, the support found for this last prediction suggests that, for many jobs, technical aptitude tests may underpredict the job performance of female applicants and employees. Future research should examine this question. © Association for Psychological Science 2011.

  12. Nuclear forensics support. Technical guidance. Reference manual (Chinese Edition)

    International Nuclear Information System (INIS)

    2012-01-01

    Illicit trafficking of nuclear and other radioactive material has been an issue of concern since the first seizures in the early 1990s. By the end of 2004 Member States had confirmed 540 cases, while about another 500 remain unconfirmed. Most of the confirmed cases have a criminal dimension, even if they were not for known terrorist purposes. The attacks of September 2001 in the USA dramatically emphasized the requirement for the enhanced control and security of nuclear and other radioactive material. In response to a resolution by the IAEA General Conference in September 2002 the IAEA has adopted an integrated approach to protection against nuclear terrorism. This brings together IAEA activities concerned with the physical protection of nuclear material and nuclear installations, nuclear material accountancy, detection and response to illicit nuclear trafficking, the security and safety of radioactive sources, emergency response measures - including pre-emergency measures in Member States and at the IAEA - and the promotion of State adherence to relevant international instruments. States have the responsibility for combating illicit trafficking and the inadvertent movements of radioactive material. The IAEA cooperates with Member States and other international organizations in joint efforts to prevent incidents of illicit trafficking and inadvertent movements and to harmonize policies and measures by providing relevant advice through a range of technical assistance and documents. In this context, the IAEA issued a group of three technical documents, co-sponsored by the World Customs Organization, Europol and Interpol, on the inadvertent movement and illicit trafficking of radioactive material. The first is Prevention of the Inadvertent Movement and Illicit Trafficking of Radioactive Material (IAEA-TECDOC-1311), the second is called Detection of Radioactive Material at Borders (IAEA-TECDOC-1312) and the third is Response to Events Involving the Inadvertent Movement

  13. Instrumentation and Controls Division, Technical Support Department Management Plan, FY 1993--FY 1996

    Energy Technology Data Exchange (ETDEWEB)

    Adkisson, B.P.; Kunselman, C.W.; Effler, R.P.; Miller, D.R.; Millet, A.J.; Stansberry, C.T.

    1993-08-01

    This report describes the organization, key functions, and major activities of the Technical Support Department The Department is the programmatic support element of the Instrumentation and Controls Division. The Department`s primary focus is the support of existing equipment and systems at Oak Ridge National Laboratory that are generally characterized as instrumentation and controls. The support takes the form of repair, calibration, fabrication, field engineering, preventive maintenance, software support, and record keeping.

  14. The quality assurance liaison: Combined technical and quality assurance support

    International Nuclear Information System (INIS)

    Bolivar, S.L.; Day, J.L.

    1993-01-01

    This paper describes the role of the quality assurance liaison, the responsibilities of this position, and the evolutionary changes in duties over the last six years. The role of the quality assurance liaison has had a very positive impact on the Los Alamos Yucca Mountain Site Characterization (YW) quality assurance program. Having both technical and quality assurance expertise, the quality assurance liaisons are able to facilitate communications with scientists on quality assurance issues and requirements, thereby generating greater productivity in scientific investigations. The quality assurance liaisons help ensure that the scientific community knows and implements existing requirements, is aware of new or changing regulations, and is able to conduct scientific work within Project requirements. The influence of the role of the quality assurance liaison can be measured by an overall improvement in attitude of the staff regarding quality assurance requirements and improved job performance, as well as a decrease in deficiencies identified during both internal and external audits and surveillances. This has resulted in a more effective implementation of quality assurance requirements

  15. Technical support for open-cycle MHD program

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-05-01

    The support program for open-cycle MHD at Argonne National Lab is developing the analytical tools needed to investigate the performance of the major components in the combined-cycle MHD/steam power system. The analytical effort is centered on the primary components of the system that are unique to MHD and also on the integration of these analytical representations into a model of the entire power producing system. The present project activities include modeling of the combustor, MHD channel, slag separator, and the high-temperature air preheater. In addition, these models are combined into a complete system model, which is at present capable of carrying out optimizations of the entire system on either thermodynamic efficiency or with less confidence, cost of electrical power. Also, in support of the open-cycle program, considerable effort has gone into the formulation of a CDIF Test Plan and a National MHD Test Program.

  16. Emerging need for nuclear security technical and scientific support

    International Nuclear Information System (INIS)

    Kedir, Surur

    2010-01-01

    An effective and efficient nuclear security culture is dependent on proper planning, training, awareness, operation and maintenance. A high level of safety and security culture should be consolidated in the handling of nuclear and radiation sources, so that - inter alia - human errors are minimized through good training; and the concept of safety and security culture was to make it clear that safety should be the highest priority in organization handling nuclear and radiation sources. Regulatory infrastructures for the control of radiation sources should also be supported by governments and be able to act independently. (author)

  17. Preparation of technical support material for radioactively contaminated land

    International Nuclear Information System (INIS)

    2000-01-01

    The UK Government is considering the introduction of a regulatory regime to address the legacy of sites that are radioactively contaminated due to historical activities. The Department of the Environment, Transport and the Regions (DETR) consulted on the principles of this regime in 1998, although no specific plans are yet in place to introduce the regime. The consultation paper envisaged that the Environment Agencies would have a major role in regulating the investigation and assessment of potentially contaminated sites and, where appropriate, their remediation. This work was commissioned by the Environment Agency, with support from DETR and SNIFFER (Scottish and Northern Ireland Forum for Environmental Research) to provide information on the techniques available allow the Environment Agencies to fulfil their envisaged regulatory requirements, and to assist DETR in the preparation of Statutory Guidance. The work was carried out by Entec UK Ltd, in conjunction with the NRPB

  18. Thin-shell wormholes supported by total normal matter

    Energy Technology Data Exchange (ETDEWEB)

    Mazharimousavi, S.H.; Halilsoy, M. [Eastern Mediterranean University, Department of Physics, Gazimagusa (Turkey)

    2014-09-15

    The Zipoy-Voorhees-Weyl (ZVW) spacetime characterized by mass (M) and oblateness (δ) is proposed in the construction of viable thin-shell wormholes (TSWs). A departure from spherical/cylindrical symmetry yields a positive total energy in spite of the fact that the local energy density may take negative values. We show that oblateness of the bumpy sources/black holes can be incorporated as a new degree of freedom that may play a role in the resolution of the exotic matter problem in TSWs. A small velocity perturbation reveals, however, that the resulting TSW is unstable. (orig.)

  19. Investigation of hadronic matter at the Fermilab Tevatron Collider: Technical progress report, 1986 October-1987 October

    International Nuclear Information System (INIS)

    Anderson, E.W.

    1987-01-01

    An investigation of hadronic matter at very high energy densities is reported. The present experiment, E-735, is a search for a deconfined quark-gluon plasma phase of matter expected to occur when temperatures of 240 MeV are achieved. Preliminary data have been obtained during the first operation of the Fermilab Tevatron Collider during the period January to May 1987. The collaboration is about to publish first results on the charged particle multiplicity and transverse momentum distributions. In addition, we have data on the particle identification of the produced secondaries. Both measurements are regarded on theoretical grounds to be sensitive indicators of the formation of a high temperature plasma. The capital project funded under this contract was a 240-element trigger hodoscope array, with associated electronics and monitor. The hodoscope was completed and performed to design expectations in the high-rate and high-radiation environment of the Collider. Scientific personnel supported under this contract were also responsible for the implementation of the data acquisition system used for E-735. Although the system underwent several unanticipated modifications in response to changing schedules, the required service was provided. Preparations are currently under way for the principal data acquisition during the spring of 1988. At that time we will have in place the central tracking chamber, and the remainder of the spectrometer chambers. Tests will also be made on backgrounds and detector materials appropriate to our proposal, P-787, to measure leptons and photons in the third Collider running period

  20. Definition of supportive care: does the semantic matter?

    Science.gov (United States)

    Hui, David

    2014-07-01

    'Supportive care' is a commonly used term in oncology; however, no consensus definition exists. This represents a barrier to communication in both the clinical and research settings. In this review, we propose a unifying conceptual framework for supportive care and discuss the proper use of this term in the clinical and research settings. A recent systematic review revealed several themes for supportive care: a focus on symptom management and improvement of quality of life, and care for patients on treatments and those with advanced stage disease. These findings are consistent with a broad definition for supportive care: 'the provision of the necessary services for those living with or affected by cancer to meet their informational, emotional, spiritual, social, or physical needs during their diagnostic, treatment, or follow-up phases encompassing issues of health promotion and prevention, survivorship, palliation, and bereavement.' Supportive care can be classified as primary, secondary, and tertiary based on the level of specialization. For example, palliative care teams provide secondary supportive care for patients with advanced cancer. Until a consensus definition is available for supportive care, this term should be clearly defined or cited whenever it is used.

  1. Manpower development for safe operation of nuclear power plant. China. Seminar on the technical support functions. Activity: 6.1.1-Task-03. Technical report

    International Nuclear Information System (INIS)

    Bouget, Y.H.

    1994-01-01

    The seminar discussed the objectives, organization and scope of work of the Central and Site Technical Service Department in support of operating NPP; transfer of capability to establish and maintain an efficient operation support; defined the responsibilities and interface between on site and Central Technical Staff

  2. Approaches to technical and scientific support for the nuclear regulatory body in Belarus

    International Nuclear Information System (INIS)

    Lobacha, Dmitry J.; Teskeb, Hartmuth

    2010-01-01

    Approaches to technical and scientific support for the State NPP Program in Belarus are described and compared with the recommendations of the IAEA. The past infrastructure in Belarus did not have specialized technical support organization (TSO) for the nuclear regulatory body. Currently, there are two technical and scientific support centers, nominated by decrees. They are part of the NPP infrastructure and belong to the National Academy of Sciences and the Ministry of Energy. It is a challenge to establish the needed TSO capacities for the nuclear regulatory body (the Ministry for Emergency Situations) inside existing institutions of the Ministry for Emergency Situations (MES). Initially, the new technical support structure could focus on well known topics like emergency preparedness and radiation protection. The scope of work has to be extended to all major aspects of radiation and nuclear safety of the new NPP soon. National education as well as international knowledge transfer are important for that. Tasks and challenges of new technical safety institution(s) are described. (author)

  3. Spent nuclear fuel technical baseline description, Fiscal Year 1996: Volume II, supporting data

    International Nuclear Information System (INIS)

    Womack, J.C.

    1995-11-01

    The Technical Baseline Description documents the Project-Level functions and requirements, along with associated enabling assumptions, issues, trade studies, interfaces, and products. It is a snapshot in time of the baseline at the beginning of September 1995. It supports the individual subprojects in the development of lower-tier functions, requirements, and specifications in FY 1996. It also supports the need for Hanford site planning to be based on an integrated Hanford site systems engineering technical baseline; and is traceable to that baseline. This document replaces and supercedes WHC-SD-SNF-SD-003

  4. (N+1)-dimensional Lorentzian evolving wormholes supported by polytropic matter

    Energy Technology Data Exchange (ETDEWEB)

    Cataldo, Mauricio [Universidad del Bio-Bio, Departamento de Fisica, Facultad de Ciencias, Concepcion (Chile); Arostica, Fernanda; Bahamonde, Sebastian [Universidad de Concepcion, Departamento de Fisica, Concepcion (Chile)

    2013-08-15

    In this paper we study (N+1)-dimensional evolving wormholes supported by energy satisfying a polytropic equation of state. The considered evolving wormhole models are described by a constant redshift function and generalizes the standard flat Friedmann-Robertson-Walker spacetime. The polytropic equation of state allows us to consider in (3+1)-dimensions generalizations of the phantom energy and the generalized Chaplygin gas sources. (orig.)

  5. Knowledge-Centric Technical Support Organization (TSO) Using Process Oriented Knowledge Management Approach

    International Nuclear Information System (INIS)

    Mohamad Safuan Sulaiman; Siti Nurbahyah Hamdan; Mohd Dzul Aiman Aslan

    2014-01-01

    In the United States of America, Process Oriented Knowledge Management (POKM) Model has been successfully implemented in most of Nuclear Power Plants. This approach has been introduced in Nuclear Knowledge Management program by the IAEA since 2011. Malaysia has involved in the IAEA Coordinated Research Project (CRP) focusing the approach started in 2011. The main objective for Malaysian participation of this project is to support readiness in terms of nuclear technical knowledge by Technical Support Organization (TSO) for Nuclear Power Program. This project has focused on several nuclear technical areas which consist of Public Information (PI), Radiological Impact Assessment (RIA), Nuclear Reactor Technology (NRT), Plant and Prototype Development (PDC) and nuclear knowledge management. This paper articulates the detail POKM approach and project experience in implementing the approach at organizational level. (author)

  6. Design of Technical Support System for Retail Company Based on Cloud

    Directory of Open Access Journals (Sweden)

    Shao Ping

    2017-01-01

    Full Text Available With the retail side of the market in China, the sale of electricity companies as a new source of power retail, they participate in the electricity market business. National and local governments subsequently introduced the corresponding policies and rules, the technical support system becomes one of the necessary conditions for the access of the retail company. Retail electricity companies have started the system construction, but has not yet formed a standardized, complete architecture. This paper analyzes the business and data interaction requirements of retail electricity companies, and then designs the functional architecture based on basic application, advanced application and value-added application, and the technical architecture based on “cloud”. On this basis, the paper discusses the selection of private cloud, public cloud and mixed cloud model, and the rationalization suggestion of system construction. Which can provide reference for the construction of the technical support system of the domestic retail enterprises.

  7. Input of Lithuanian science into nuclear safety improvement, coordination of technical support organizations

    International Nuclear Information System (INIS)

    Maksimovas, G.

    1999-01-01

    VATESI in its activities is very much supported by Lithuanian scientific and technical organizations which are doing expertise of safety analyses of Ignalina NPP. Description of these organizations is presented. Broad international cooperation and assistance programs is underway helping Lithuanians scientific organizations to build own capacity in making nuclear safety research

  8. The Relationship between Return on Profitability and Costs of Outsourcing Information Technology Technical Support

    Science.gov (United States)

    Odion, Segun

    2011-01-01

    The purpose of this quantitative correlational research study was to examine the relationship between costs of operation and total return on profitability of outsourcing information technology technical support in a two-year period of outsourcing operations. United States of America list of Fortune 1000 companies' chief information officers…

  9. Distance Education Programs in Texas Community & Technical Colleges: Assessing Student Support Services in a Virtual Environment.

    Science.gov (United States)

    Luedtke, Cherry Beth

    This project evaluates the status of distance learning at 54 public, two-year community, and technical colleges in Texas. Data was collected from the Web sites of each of the institutions. The Web site data indicted that 44 of the colleges refer specifically to distance education courses offered. To assess what student support services are…

  10. Friend or Foe? New Managerialism and Technical, Administrative and Clerical Support Staff in Australian Universities

    Science.gov (United States)

    Pick, David; Teo, Stephen; Yeung, Melissa

    2012-01-01

    The aim of this paper is to assess and conceptualise the effects of new managerialism-related organisational reforms in three Australian public universities on technical, administrative and clerical support staff job stressors and job satisfaction. Using a mixed method approach consisting of a quantitative core component and qualitative…

  11. Role of technical and scientific support organization In Indonesian regulatory body

    International Nuclear Information System (INIS)

    Yusri Heni, N.A.; Zarkasih, A.S.; Liliana, Y.P.; Salman, S.

    2007-01-01

    Indonesian Nuclear Energy Regulatory Agency (BAPETEN) has the function in controlling the utility of nuclear energy through regulation, licensing and inspection, with the aim, interalia, to ensure the welfare, the security and the peace of people, to assure the safety and the health of workers and public, and the environmental protection, and to prevent diversion of purpose of the nuclear material utilization (Article 14 and 15 of Act no 10, 1997 on Nuclear Energy). The role and quality of technical and scientific expertise in supporting regulatory systems are importance increase the effectiveness and public confidence. The Center for Regulatory Assessment of Nuclear Installation and Nuclear Material and Center for Regulatory Assessment of Radiation Facilities and Radioactive Sources as part of BAPETEN organization has a function as technical and scientific support for regulatory systems. The purpose of this function is to provide technical and scientific basis for decisions and activities regarding nuclear and radiation safety during regulatory processes, such as in the developing and establishing regulation, technical verification for licensing, assessment of inspection funding and enforcement. In order to meet the quality and effectiveness of technical and scientific result activity, those two centers for regulatory assesment used internal and external technical experts and joint cooperation with universities, research institutes or laboratories. The development of technical and scientific strategic planning in enhancing nuclear and radiation safety is done by the following increasing of : Human resources and expertise by internal and external training or on the job training; number for computer code to perform safety analysis, capability and quality for review and assessment, national and international cooperation, etc. (author)

  12. Non-governmental organizational health operations in humanitarian crises: the case for technical support units.

    Science.gov (United States)

    Greenough, P Gregg; Nazerali, Rahim; Fink, Sheri; VanRooyen, Michael J

    2007-01-01

    As the humanitarian health response industry grows, there is a need for technical health expertise that can build an evidence base around outcome measures and raise the quality and accountability of the health relief response. We propose the formation of technical support units (TSUs), entities of health expertise institutionalized within humanitarian non-governmental organizations (NGOs), which will bridge the gap between the demand for evidence-based, humanitarian programming and the field capacity to accomplish it. With the input of major humanitarian NGOs and donors, this paper discusses the attributes and capacities ofTSUs; and the mechanisms for creating and enhancing TSUs within the NGO management structure.

  13. Yucca Mountain Project: A summary of technical support activities, January 1987--June 1988

    International Nuclear Information System (INIS)

    1989-05-01

    This report is a summary of the technical support activities of Mifflin ampersand Associates, Inc., during the 18-month period beginning 01 January 1987 and ending on 30 June 1988. It covers the following topics: Vadose zone drilling site selection, permits and quality assurance (QA) procedures; climate change; geochemistry, mineralogy; disturbed zone; hydrogeology; and review of technical documents. The report is organized by generally discussing each topic from the following perspectives: issue(s), objective(s) of activity, finding(s), interpretation of finding(s), additional work needed, recommended program, and existing program

  14. IAEA Safeguards and technical support programs: POTAS in the 1990s

    International Nuclear Information System (INIS)

    Kessler, C.J.

    1991-01-01

    The US Program of Technical Assistance to IAEA Safeguards (POTAS) has since 1978 provided technology and technical assistance to the IAEA to support its nuclear safeguards activities. The present level of support, $6.9 million per year, equals 10% of the Department of Safeguards annual budget. During the next decade, the International Atomic Energy Agency (IAEA) will face new technical challenges in carrying out its verification activities. To help the IAEA acquire the technology and other technical support that it will require in the 1990s, POTAS expects to continue its assistance, both in the areas established in the past and in additional areas dictated by newly identified IAEA safeguards requirements. This paper will look at the political and policy context within which the Department of Safeguards, and hence POTAS, operates, and how that context is expected to evolve over the next decade. The roles and functions of POTAS will be identified and discussed in terms of their historical evolution. Lastly, the paper will consider how POTAS is expected to change during the 1990s, both to maintain effectiveness in existing roles and functions, and to meet the challenge of the changing policy context. 5 refs

  15. Active Control of Thermostatic Loads for Economic and Technical Support to Distribution Grids

    DEFF Research Database (Denmark)

    Bhattarai, Bishnu Prasad; Mendaza, Iker Diaz de Cerio; Bak-Jensen, Birgitte

    2016-01-01

    Active control of electric water heaters (EWHs) is presented in this paper as a means of exploiting demand flexibility for supporting low-voltage (LV) distribution grids. A single-node model of an EWH is implemented in DIgSILENT PowerFactory using a thermal energy balancing equation and three...... decentralized control schemes are designed to ensure consumer comfort, economic benefit to the consumer, and technical support to LV grids. First, a price-based control that adaptively adjusts an allowable energy band per electricity price is implemented to ensure economic benefit. Next, an adaptive update...... of the energy band is done based on feeder loading to respect thermal grid constraints. Finally, a voltage-based control is implemented to provide real-time voltage support to the LV grids. Simulation results demonstrate the capability of the presented method to realize both economic and technical advantages...

  16. Technical Support Document for Version 3.9.1 of the COMcheck Software

    Energy Technology Data Exchange (ETDEWEB)

    Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan; Halverson, Mark A.; Lucas, Robert G.; Richman, Eric E.; Schultz, Robert W.; Winiarski, David W.

    2012-09-01

    COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989 and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC and version 3.9.0 support for 2000 and 2001 IECC are no longer included, but those sections remain in this document for reference purposes.

  17. Investigation of hadronic matter at the Fermilab Tevatron Collider. Technical progress report

    International Nuclear Information System (INIS)

    Anderson, E.W.

    1985-01-01

    Hadronic matter at very high energy densities is investigated. The present experimental effort is focused on a search for a new quark-gluon plasma phase expected to occur when temperatures of 240 MeV are achieved. Instrumentation for several unique signatures is being developed to exploit the first operation of the Fermilab Tevatron Collider in 1986. The capital projects funded under this contract are a 240-element trigger hodoscope array, and in phase II a segmented photon detector. For these projects $172K are requested for the period 1986 February 1 through 1987 January 31 to complete the trigger hodoscope, and $160K for the period 1987 February 1 through 1988 January 31 to construct a portion of the photon detector. These figures are as presented in the original proposal. Due to budget constraints on the Fermilab experimental support program, we will not be able to receive the full complement of necessary electronics from the Fermilab PREP pool in the required period. Consequently, an additional $35K is requested for the period 1986 February 1 through 1987 January 31 for a portion of the electronics for the 240-channel trigger hodoscope. For the same reasons, Fermilab cannot provide the required magnet on schedule; a one year delay is proposed. As this would seriously impact our physics goals, the collaboration is attempting to fund the magnet without delay through the universities. Efforts to date have concentrated on the design and testing of the hodoscope. Extensive measurements on the radiation levels and effects during the various accelerator cycles have been made. These data are essential to the proper selection of scintillator and design of electronics. These tests are now complete, and final construction is beginning. 11 refs

  18. Manpower development for safe operation of nuclear power plant. China. Seminar on the technical support functions. Activity: 6.1.1-Task-03. Technical report

    International Nuclear Information System (INIS)

    Groom, S.H.

    1994-01-01

    The workshop which was intended to present operating experiences from utilities with a wide range of numbers of operating nuclear units. The speaker, S.H. Groom, presented N.B. Power's experience with a single nuclear unit, and intended to: Present the objectives, organization, and scope of work of the central and site Technical Service groups within N.B. Power which support the operation of the Point Lepreau NGS; Define responsibilities of, and interfaces between the on-site and the central technical service staff; Recommend methods for the establishment and maintenance of an efficient technical support group for the operation of any nuclear power plant

  19. Case study of an organic Rankine cycle applied for excess heat recovery: Technical, economic and policy matters

    International Nuclear Information System (INIS)

    Lemmens, Sanne; Lecompte, Steven

    2017-01-01

    Highlights: • Case study of an organic Rankine cycle for heat recovery from an industrial kiln. • The costs and financial feasibility of the system are discussed in detail. • The cost structure is most defined by the capital costs, annual costs are limited. • The system is financially feasible, but subsidies remain important. • The results are most sensitive to changes in load hours and electricity price. - Abstract: Many industrial processes inevitably produce excess heat as by-product. Recovering this heat is a matter of waste management and provides opportunities to improve the energy use efficiency. The excess heat can be used for heating purposes (e.g., in processes, or delivered to district heating systems or buildings) or to generate electricity. An increasingly applied technology for industrial excess heat recovery is the organic Rankine cycle (ORC), suitable to recover low-grade heat from 90 °C onwards. Although ORCs are studied intensively, few studies have examined the economics of commissioned ORC systems. This paper investigates a 375 kW_g_r_o_s_s ORC system employed for flue gas heat recovery from an industrial kiln in Flanders, Belgium. The purpose of the study is twofold: providing insight into a practical ORC case; and evaluating the financial feasibility while taking the specific policy circumstances into account. The financial appraisal takes account of the specific technical setup, the diverse costs of the system, the external economic parameters, and the policy circumstances in Europe, Belgium and Flanders. A sensitivity analysis illustrates the influence of each parameter on the results. The analysis demonstrates the dominance of the investment costs (4217 €_2_0_1_3/kW_g_r_o_s_s) in the expenses. Under the valid conditions the investment has a positive financial return, but the financial support from the government is indispensable. Finally, the sensitivity analysis reveals the importance of attaining sufficient load hours and the

  20. Technical Support Document for Version 3.9.0 of the COMcheck Software

    Energy Technology Data Exchange (ETDEWEB)

    Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan; Halverson, Mark A.; Lucas, R. G.; Richman, Eric E.; Schultz, Ralph W.; Winiarski, David W.

    2011-09-01

    COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989 and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards. Beginning with COMcheck version 3.8.0, support for 90.1-1989, 90.1-1999, and the 1998 IECC are no longer included, but those sections remain in this document for reference purposes.

  1. Technical and Technological Support of Agricultural Enterprises on the Basis of Association Interaction: a Methodical Approach

    Directory of Open Access Journals (Sweden)

    Pyvovar Petro V.

    2017-12-01

    Full Text Available The aim of the research is the development of a methodical approach to justifying directions of association interaction of agricultural enterprises for the most effective technical and technological support of their economic activities. It is substantiated that the decision-making regarding the directions of group interaction in the field of forming and using the machine and tractor fleet of agricultural enterprises should be based on results of a strategic analysis of the current level of and trends in the changes in indicators of their technical support. This includes several stages: 1 determining a scenario for the development of the technical base of the economic entity (matrix methods; 2 multifactor grouping taking into account the available equipment and resource potential; 3 identification of potential sources of financing and ways of attracting necessary funds, priority partners and types of equipment and technologies; 4 estimation of a current condition of the enterprise on financial, technical, economic and market criteria; 5 substantiation of directions of group interaction of the enterprise.

  2. The influence of system interactivity and technical support on learning management system utilization

    Directory of Open Access Journals (Sweden)

    Sousan Baleghi-Zadeh

    2017-03-01

    Full Text Available In recent years, there has been a growing increase in using Learning Management System (LMS by universities. However, its utilization by students is limited in Malaysia. The main purpose of the present study is to develop and test a model that predicts LMS utilization by Malaysian higher education students. Based on the Technology Acceptance Model, the study investigated the relationships among six constructs (system interactivity, technical support, perceived ease of use, perceived usefulness, behavioral intention to use and LMS use through structural equation modelling. The participants were 216 undergraduate students from a local university in Malaysia. The result of the study revealed that system interactivity had a significant effect on perceived usefulness, but not on perceived ease of use; technical support had a significant effect on perceived ease of use, but not on perceived usefulness.

  3. Technical Support Document: 50% Energy Savings Design Technology Packages for Highway Lodging Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Wei; Gowri, Krishnan; Lane, Michael D.; Thornton, Brian A.; Rosenberg, Michael I.; Liu, Bing

    2009-09-28

    This Technical Support Document (TSD) describes the process, methodology and assumptions for development of the 50% Energy Savings Design Technology Packages for Highway Lodging Buildings, a design guidance document intended to provide recommendations for achieving 50% energy savings in highway lodging properties over the energy-efficiency levels contained in ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

  4. Facilitating computer supported cooperative work with socio-technical self-descriptions

    OpenAIRE

    Kunau, Gabriele

    2006-01-01

    How can the concept of self-description from newer systems theory be used for improving the co-evolvement of software engineering and organizational change in CSCW-projects? This thesis suggests transferring the concept of self-description into a concept of socio-technical self-description allowing an organization to describe its own computer supported work processes. The presentation of results is organized in four steps: First, a theoretical foundation is elaborated; second, an initial meth...

  5. By Hook or by Crook: Exposing the Diverse Abuse Tactics of Technical Support Scammers

    OpenAIRE

    Srinivasan, Bharat; Kountouras, Athanasios; Miramirkhani, Najmeh; Alam, Monjur; Nikiforakis, Nick; Antonakakis, Manos; Ahamad, Mustaque

    2017-01-01

    Technical Support Scams (TSS), which combine online abuse with social engineering over the phone channel, have persisted despite several law enforcement actions. The tactics used by these scammers have evolved over time and they have targeted an ever increasing number of technology brands. Although recent research has provided insights into TSS, these scams have now evolved to exploit ubiquitously used online services such as search and sponsored advertisements served in response to search qu...

  6. Technical Support Document for Version 3.4.0 of the COMcheck Software

    Energy Technology Data Exchange (ETDEWEB)

    Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan; Halverson, Mark A.; Lucas, Robert G.; Richman, Eric E.; Schultz, Robert W.; Winiarski, David W.

    2007-09-14

    COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989 and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.

  7. Material Not Categorized As Waste (MNCAW) data report. Radioactive Waste Technical Support Program

    Energy Technology Data Exchange (ETDEWEB)

    Casey, C.; Heath, B.A.

    1992-11-01

    The Department of Energy (DOE), Headquarters, requested all DOE sites storing valuable materials to complete a questionnaire about each material that, if discarded, could be liable to regulation. The Radioactive Waste Technical Support Program entered completed questionnaires into a database and analyzed them for quantities and type of materials stored. This report discusses the data that TSP gathered. The report also discusses problems revealed by the questionnaires and future uses of the data. Appendices contain selected data about material reported.

  8. Experience from the development of Point Lepreau's training program for technical support staff

    International Nuclear Information System (INIS)

    Turner, S.; Scott, K.

    2007-01-01

    The Training Department at the Point Lepreau GS has been developing and improving its training for technical support staff. A generic set of objectives are being used as the basis for a systematic approach to training. The program covers general and job specific knowledge and skills using a mix of classroom instruction, mentoring and continuing training seminars. This paper describes experience, success and the challenges in the development, delivery and evaluation of the training program. (author)

  9. Technical Support Document: 50% Energy Savings Design Technology Packages for Medium Office Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Thornton, Brian A.; Wang, Weimin; Lane, Michael D.; Rosenberg, Michael I.; Liu, Bing

    2009-09-01

    This Technical Support Document (TSD) describes the process and methodology for development of the Advanced Energy Design Guide for Medium Offices (AEDG-MO or the Guide), a design guidance document which intends to provide recommendations for achieving 50% energy savings in medium office buildings that just meet the requirements of ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings.

  10. Technical Issues Map for the NHI System Interface and Support Systems Area: 3rd Quarter FY 07

    International Nuclear Information System (INIS)

    Steven R. Sherman

    2007-01-01

    This document provides a mapping of technical issues associated with development of the Next Generation Nuclear Plant (NGNP) intermediate heat transport loop and nuclear hydrogen plant support systems to the work that has been accomplished or is currently underway. The technical issues are ranked according to priority and by assumed resolution dates. Due to funding limitations, not all high-priority technical issues are under study at the present time, and more resources will need to be dedicated to tackling such issues in the future. This technical issues map is useful for understanding the relative importance of various technical challenges and will be used as a planning tool by the NHI technical leadership for future work package planning. The technical map in its present form will be discontinued in FY08 and will be folded into a larger NHI System Interface and Support Systems project management plan and scope baseline statement in FY08

  11. Technology status in support of refined technical baseline for the Spent Nuclear Fuel project. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Puigh, R.J.; Toffer, H.; Heard, F.J.; Irvin, J.J.; Cooper, T.D.

    1995-10-20

    The Spent Nuclear Fuel Project (SNFP) has undertaken technology acquisition activities focused on supporting the technical basis for the removal of the N Reactor fuel from the K Basins to an interim storage facility. The purpose of these technology acquisition activities has been to identify technology issues impacting design or safety approval, to establish the strategy for obtaining the necessary information through either existing project activities, or the assignment of new work. A set of specific path options has been identified for each major action proposed for placing the N Reactor fuel into a ``stabilized`` form for interim storage as part of this refined technical basis. This report summarizes the status of technology information acquisition as it relates to key decisions impacting the selection of specific path options. The following specific categories were chosen to characterize and partition the technology information status: hydride issues and ignition, corrosion, hydrogen generation, drying and conditioning, thermal performance, criticality and materials accountability, canister/fuel particulate behavior, and MCO integrity. This report represents a preliminary assessment of the technology information supporting the SNFP. As our understanding of the N Reactor fuel performance develops the technology information supporting the SNFP will be updated and documented in later revisions to this report. Revision 1 represents the incorporation of peer review comments into the original document. The substantive evolution in our understanding of the technical status for the SNFP (except section 3) since July 1995 have not been incorporated into this revision.

  12. Technology status in support of refined technical baseline for the Spent Nuclear Fuel project. Revision 1

    International Nuclear Information System (INIS)

    Puigh, R.J.; Toffer, H.; Heard, F.J.; Irvin, J.J.; Cooper, T.D.

    1995-01-01

    The Spent Nuclear Fuel Project (SNFP) has undertaken technology acquisition activities focused on supporting the technical basis for the removal of the N Reactor fuel from the K Basins to an interim storage facility. The purpose of these technology acquisition activities has been to identify technology issues impacting design or safety approval, to establish the strategy for obtaining the necessary information through either existing project activities, or the assignment of new work. A set of specific path options has been identified for each major action proposed for placing the N Reactor fuel into a ''stabilized'' form for interim storage as part of this refined technical basis. This report summarizes the status of technology information acquisition as it relates to key decisions impacting the selection of specific path options. The following specific categories were chosen to characterize and partition the technology information status: hydride issues and ignition, corrosion, hydrogen generation, drying and conditioning, thermal performance, criticality and materials accountability, canister/fuel particulate behavior, and MCO integrity. This report represents a preliminary assessment of the technology information supporting the SNFP. As our understanding of the N Reactor fuel performance develops the technology information supporting the SNFP will be updated and documented in later revisions to this report. Revision 1 represents the incorporation of peer review comments into the original document. The substantive evolution in our understanding of the technical status for the SNFP (except section 3) since July 1995 have not been incorporated into this revision

  13. A Study on Establishment of Nuclear Power Plant Technical Support System and Activation Plan

    International Nuclear Information System (INIS)

    Wi, M. H.; Park, W. S.; Lee, H. S.; Kim, J. H.; Won, B. C.; Kim, Y. H.; Goo, D. S.; Choi, H. B.

    2009-11-01

    This report includes activities related to establishment of 'BaroBaro nuclear plant technical support center', 'selection of nuclear plant applicable technology', and 'various information interchange between KAERI and nuclear power plant'. 'BaraBaro center was newly organized to support on resolving the technical difficulties in operation of nuclear power plant'. The center consists of 10 technical parts and a leading expert is assigned to each part to support more efficiently. This center is always served for 24 hour. The plant operators can register their problem to the center by a call, e-mail, or internet and they can receive the answer about what they issued from KAERI experts. To make a brochure, we selected 32 technologies which are applicable in nuclear plant without additional R and D activity. The brochure was distributed to the officer in charge of nuclear plant operations. Various meetings were held to increase interchange of experience and technology between KAERI and nuclear power plant and we discussed many different issues at that meeting

  14. ECOS: a configurable, multi-terabyte database supporting engineering and technical computing at Sizewell B

    International Nuclear Information System (INIS)

    Binns, F.; Fish, A.

    1992-01-01

    One of the three main classes of computing support systems is concerned with the technical and engineering aspects of Sizewell-B power station. These aspects are primarily concerned with engineering means to optimise plant use to maximise power output by increasing availability and efficiency. At Sizewell-B the Engineering Computer system (ECOS) will provide the necessary support facilities, and is described. ECOS is being used by the station commissioning team and for monitoring the state of some plant already in service. (Author)

  15. Technical Issues Map for the NHI System Interface and Support Systems Area: 1st Quarter FY 07

    International Nuclear Information System (INIS)

    Steven R. Sherman

    2006-01-01

    This document provides a mapping of technical issues associated with development of the Next Generation Nuclear Plant (NGNP) intermediate heat transport loop and nuclear hydrogen plant support systems to the work that has been accomplished or is currently underway. The technical issues are ranked according to priority and by assumed resolution dates. Due to funding limitations, not all high-priority technical issues are under study at the present time, and more resources will need to be dedicated to tackling such issues in the future. This technical issues map is useful for understanding the relative importance of various technical challenges and will be used as a planning tool for future work package planning

  16. 3 + 1-dimensional thin shell wormhole with deformed throat can be supported by normal matter

    Energy Technology Data Exchange (ETDEWEB)

    Mazharimousavi, S.H.; Halilsoy, M. [Eastern Mediterranean University, Department of Physics, Gazimagusa (Turkey)

    2015-06-15

    From the physics standpoint the exotic matter problem is a major difficulty in thin shell wormholes (TSWs) with spherical/cylindrical throat topologies.We aim to circumvent this handicap by considering angle dependent throats in 3 + 1 dimensions. By considering the throat of the TSW to be deformed spherical, i.e., a function of θ and φ, we present general conditions which are to be satisfied by the shape of the throat in order to have the wormhole supported by matter with positive density in the static reference frame. We provide particular solutions/examples to the constraint conditions. (orig.)

  17. Chemistry, manufacturing and control (CMC) and clinical trial technical support for influenza vaccine manufacturers.

    Science.gov (United States)

    Wahid, Rahnuma; Holt, Renee; Hjorth, Richard; Berlanda Scorza, Francesco

    2016-10-26

    With the support of the Biomedical Advanced Research and Development Authority (BARDA) of the US Department of Health and Human Services, PATH has contributed to the World Health Organization's (WHO's) Global Action Plan for Influenza Vaccines (GAP) by providing technical and clinical assistance to several developing country vaccine manufacturers (DCVMs). GAP builds regionally based independent and sustainable influenza vaccine production capacity to mitigate the overall global shortage of influenza vaccines. The program also ensures adequate influenza vaccine manufacturing capacity in the event of an influenza pandemic. Since 2009, PATH has worked closely with two DCVMs in Vietnam: the Institute of Vaccines and Medical Biologicals (IVAC) and VABIOTECH. Beginning in 2013, PATH also began working with Torlak Institute in Serbia; Instituto Butantan in Brazil; Serum Institute of India Private Ltd. in India; and Changchun BCHT Biotechnology Co. (BCHT) in China. The DCVMs supported under the GAP program all had existing influenza vaccine manufacturing capability and required technical support from PATH to improve vaccine yield, process efficiency, and product formulation. PATH has provided customized technical support for the manufacturing process to each DCVM based on their respective requirements. Additionally, PATH, working with BARDA and WHO, supported several DCVMs in the clinical development of influenza vaccine candidates progressing toward national licensure or WHO prequalification. As a result of the activities outlined in this review, several companies were able to make excellent progress in developing state-of-the-art manufacturing processes and completing early phase clinical trials. Licensure trials are currently ongoing or planned for several DCVMs. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Integration of Photovoltaics in Buildings—Support Policies Addressing Technical and Formal Aspects

    Directory of Open Access Journals (Sweden)

    Thorsten Schuetze

    2013-06-01

    Full Text Available The integration of photovoltaic (PV generators in the envelope of a building by means of building-integrated photovoltaics (BIPV offers an immense potential, both in market development and the production of renewable electric energy that is close to the point of electricity consumption. In Germany, for example, by integrating photovoltaics in buildings up to 50% of the electricity demand can be covered. The political support of BIPV would contribute to the development and installation of BIPV components and therefore also promote the development of new business areas for industries dealing with components used in building envelopes and photovoltaic generators. BIPV can be separated into three different integration types: “technical”, “formal” and “technical & formal”. Political instruments for the support of PV-installations, particularly BIPV are discussed in this paper using Germany and France as examples. Due to successful financial support policies, PV became the most powerful electricity production technology in Germany. In France, the unique financial support of BIPV is resulting in an exemplary development and growth of certified BIPV components available on the market and, from a technical, aesthetic architectural and legal certainty point of view, facilitating the easy and widespread integration of photovoltaic generators in buildings.

  19. Role of the exercises in the training of the technical support center members in Croatia

    International Nuclear Information System (INIS)

    Jurkovic, I.-A.; Grgic, D.; Skanata, D.

    1999-01-01

    Since the beginning of 1998, when the modernization of the existing Emergency Plan and Program in Croatia started, lots of things were done and changed. New organizational structure was set up and Technical Support Center (TSC) as a lead technical agency was introduced. Role, obligations and responsibilities of the TSC were defined and appropriate procedures were developed. These activities are more or less the same recommended by the International Atomic Energy Agency (IAEA). As exercises and workshops are important part of all emergency planning and preparedness activities, they also play an important role in out today and future plans. Croatian Off-site Emergency Response Plan (OERP) recognizes three national workshops that are going to be organized every year. The first one was already organized at the beginning of 1998, in February. Second workshop was organized at the beginning of November 1998. Main workshop objective was to train the TSC staff.(author)

  20. Technical support for GEIS: radioactive waste isoltaion in geologic formations. Volume 19. Thermal analyses

    International Nuclear Information System (INIS)

    1978-04-01

    This volume, Y/OWI/TM-36/19, ''Thermal Analyses,'' is one of a 23-volume series, ''Technical Support for GEIS: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-36, which supplements the ''Contribution to Draft Generic Environmental Impact Statement on Commercial Waste Management: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-44. The series provides a more complete technical basis for the preconceptual designs, resource requirements, and environmental source terms associated with isolating commercial LWR wastes in underground repositories in salt, granite, shale and basalt. Wastes are considered from three fuel cycles: uranium and plutonium recycling, no recycling of spent fuel and uranium-only recycling. This volume discusses the thermal impacts of the isolated high level and spent-fuel wastes in geologic formations. A detailed account of the methodologies employed is given as well as selected results of the analyses

  1. The evaluator as technical assistant: A model for systemic reform support

    Science.gov (United States)

    Century, Jeanne Rose

    This study explored evaluation of systemic reform. Specifically, it focused on the evaluation of a systemic effort to improve K-8 science, mathematics and technology education. The evaluation was of particular interest because it used both technical assistance and evaluation strategies. Through studying the combination of these roles, this investigation set out to increase understanding of potentially new evaluator roles, distinguish important characteristics of the evaluator/project participant relationship, and identify how these roles and characteristics contribute to effective evaluation of systemic science education reform. This qualitative study used interview, document analysis, and participant observation as methods of data collection. Interviews were conducted with project leaders, project participants, and evaluators and focused on the evaluation strategies and process, the use of the evaluation, and technical assistance. Documents analyzed included transcripts of evaluation team meetings and reports, memoranda and other print materials generated by the project leaders and the evaluators. Data analysis consisted of analytic and interpretive procedures consistent with the qualitative data collected and entailed a combined process of coding transcripts of interviews and meetings, field notes, and other documents; analyzing and organizing findings; writing of reflective and analytic memos; and designing and diagramming conceptual relationships. The data analysis resulted in the development of the Multi-Function Model for Systemic Reform Support. This model organizes systemic reform support into three functions: evaluation, technical assistance, and a third, named here as "systemic perspective." These functions work together to support the project's educational goals as well as a larger goal--building capacity in project participants. This model can now serve as an informed starting point or "blueprint" for strategically supporting systemic reform.

  2. Catalytic combustion of particulate matter Catalysts of alkaline nitrates supported on hydrous zirconium

    International Nuclear Information System (INIS)

    Galdeano, N.F.; Carrascull, A.L.; Ponzi, M.I.; Lick, I.D.; Ponzi, E.N.

    2004-01-01

    In order to explore a method to remove particulate matter, catalysts of different alkaline nitrates (Li, K and Cs) supported on hydrous zirconium were prepared by the method of incipient humidity and tested as catalysts for particulate matter combustion. The catalytic activity was determined by using the temperature programmed oxidation technique (TPO), utilizing two equipments, a thermogravimetric reactor and other of fixed bed. In the first case the particulate matter/catalyst mixture was milled carefully in a mortar (tight contact) while in the second case more realistic operative conditions were used, particulate matter/catalyst mixture was made with a spatula (loose contact). All prepared catalysts showed good activity for the particulate matter combustion. The cesium catalyst was the one that presented higher activity, decreasing the combustion temperature between 200 and 250 deg. C with respect to the combustion without catalyst. The catalyst with lithium nitrate became active at higher temperature than its melting point and the same occurred with the potassium catalyst. This did not occur for the catalyst containing cesium nitrate that melts at 407 deg. C and became active from 350 deg. C

  3. Review of Technical Studies in the United States in Support of Burnup Credit Regulatory Guidance

    International Nuclear Information System (INIS)

    Wagner, John C.; Parks, Cecil V.; Mueller, Don; Gauld, Ian C.

    2010-01-01

    Taking credit for the reduction in reactivity associated with fuel depletion can enable more cost-effective, higher-density storage, transport, disposal, and reprocessing of spent nuclear fuel (SNF) while maintaining sufficient subcritical margin to establish an adequate safety basis. Consequently, there continues to be considerable interest in the United States (U.S.), as well as internationally, in the increased use of burnup credit in SNF operations, particularly related to storage, transport, and disposal of commercial SNF. This interest has motivated numerous technical studies related to the application of burnup credit, both domestically and internationally, as well as the design of SNF storage, transport and disposal systems that rely on burnup credit for maintaining subcriticality. Responding to industry requests and needs, the U.S. Nuclear Regulatory Commission (NRC) initiated a burnup credit research program in 1999, with support from the Oak Ridge National Laboratory (ORNL), to develop regulatory guidance and the supporting technical bases for allowing and expanding the use of burnup credit in pressurized-water reactor SNF storage and transport applications. Although this NRC research program has not been continuous since its inception, considerable progress has been achieved in many key areas in terms of increased understanding of relevant phenomena and issues, availability of relevant information and data, and subsequently updated regulatory guidance for expanded use of burnup credit. This paper reviews technical studies performed by ORNL for the U.S. NRC burnup credit research program. Examples of topics include reactivity effects associated with reactor operating characteristics, fuel assembly characteristics, burnable absorbers, control rods, spatial burnup distributions, cooling time, and assembly misloading; methods and data for validation of isotopic composition predictions; methods and data for validation of criticality calculations; and

  4. Quantifying Matter

    CERN Document Server

    Angelo, Joseph A

    2011-01-01

    Quantifying Matter explains how scientists learned to measure matter and quantify some of its most fascinating and useful properties. It presents many of the most important intellectual achievements and technical developments that led to the scientific interpretation of substance. Complete with full-color photographs, this exciting new volume describes the basic characteristics and properties of matter. Chapters include:. -Exploring the Nature of Matter. -The Origin of Matter. -The Search for Substance. -Quantifying Matter During the Scientific Revolution. -Understanding Matter's Electromagnet

  5. Organizational Structures and Processes to Support and Sustain Effective Technical Assistance in a State-Wide Multi-Tiered System of Support Initiative

    Science.gov (United States)

    Morrison, Julie Q.; Russell, Christine; Dyer, Stephanie; Metcalf, Terri; Rahschulte, Rebecca L.

    2014-01-01

    Despite the national proliferation of technical assistance as a driver for school reform and as a model for embedded and sustained professional development, very little is known about the organizational structures and processes needed to support technical assistance. The purpose of this paper is to describe a structured needs assessment process…

  6. Final Technical Report for ``Paths to Discovery at the LHC : Dark Matter and Track Triggering"

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, Kristian [Northwestern Univ., Evanston, IL (United States)

    2016-10-24

    Particle Dark Matter (DM) is perhaps the most compelling and experimentally well-motivated new physics scenario anticipated at the Large Hadron Collider (LHC). The DE-SC0014073 award allowed the PI to define and pursue a path to the discovery of Dark Matter in Run-2 of the LHC with the Compact Muon Solenoid (CMS) experiment. CMS can probe regions of Dark Matter phase-space that direct and indirect detection experiments are unable to constrain. The PI’s team initiated the exploration of these regions, searching specifically for the associated production of Dark Matter with top quarks. The effort focuses on the high-yield, hadronic decays of W bosons produced in top decay, which provides the highest sensitivity to DM produced via through low-mass spin-0 mediators. The group developed identification algorithms that achieve high efficiency and purity in the selection of hadronic top decays, and analysis techniques that provide powerful signal discrimination in Run-2. The ultimate reach of new physics searches with CMS will be established at the high-luminosity LHC (HL-LHC). To fully realize the sensitivity the HL-LHC promises, CMS must minimize the impact of soft, inelastic (“pileup”) interactions on the real-time “trigger” system the experiment uses for data refinement. Charged particle trajectory information (“tracking”) will be essential for pileup mitigation at the HL-LHC. The award allowed the PI’s team to develop firmware-based data delivery and track fitting algorithms for an unprecedented, real-time tracking trigger to sustain the experiment’s sensitivity to new physics in the next decade.

  7. The role of organisational support in teleworker wellbeing: a socio-technical systems approach.

    Science.gov (United States)

    Bentley, T A; Teo, S T T; McLeod, L; Tan, F; Bosua, R; Gloet, M

    2016-01-01

    The prevalence of telework and other forms of mobile working enabled by digital technology is increasing markedly. Following a socio-technical systems approach, this study aims to examine the role of organisational social support and specific support for teleworkers in influencing teleworker wellbeing, the mediating role of social isolation, potentially resulting from a person-environment mismatch in these relationships, and possible differences in these relationships between low-intensity and hybrid teleworkers. Teleworkers' (n = 804) perceptions of support and telework outcomes (psychological strain, job satisfaction, and social isolation) were collected using an on-line survey of teleworking employees distributed within 28 New Zealand organisations where knowledge work was undertaken. Organisational social support and teleworker support was associated with increased job satisfaction and reduced psychological strain. Social isolation mediated the relationship between organisational social support and the two outcome variables, and some differences were observed in the structural relationships for hybrid and low-intensity teleworker sub-samples. These findings suggest that providing the necessary organisational and teleworker support is important for enhancing the teleworker-environment fit and thereby ensuring desirable telework outcomes. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  8. Technical support document for the surface disposal of sewage sludge. Final report

    International Nuclear Information System (INIS)

    1992-11-01

    The document provides the technical background and justification for the U.S. Environmental Protection Agency's (EPA) final regulation (40 CFR Part 503) covering the surface disposal of sewage sludge. The document summarizes current practices in land application and presents data supporting the risk assessment methodology used to derive human health and environmental risk-based limits for contaminants in sewage sludge placed on surface disposal sites. The management practices associated with surface disposal are outlined and the different pathways by which contaminants reach highly-exposed individuals (HEIs) through surface disposal are discussed

  9. Technical support document for the surface disposal of sewage sludge. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1992-11-01

    The document provides the technical background and justification for the U.S. Environmental Protection Agency's (EPA) final regulation (40 CFR Part 503) covering the surface disposal of sewage sludge. The document summarizes current practices in land application and presents data supporting the risk assessment methodology used to derive human health and environmental risk-based limits for contaminants in sewage sludge placed on surface disposal sites. The management practices associated with surface disposal are outlined and the different pathways by which contaminants reach highly-exposed individuals (HEIs) through surface disposal are discussed.

  10. Technical support document for land application of sewage sludge. Volume 1. Final report

    International Nuclear Information System (INIS)

    Jones, A.; Beyer, L.; Rookwood, M.; Pacenka, J.; Bergin, J.

    1992-11-01

    The document provides the technical background and justification for the U.S. Environmental Protection Agency's (EPA) final regulation (40 CFR Part 503) covering the land application of sewage sludge. The document summarizes current practices in land application and presents data supporting the risk assessment methodology used to derive human health and environmental risk-based limits for contaminants in land applied sewage sludge. The management practices associated with land application are outlined and the different pathways by which contaminants reach highly-exposed individuals (HEIs) through land application are discussed

  11. Technical and scientific support organizations and strengthening of nuclear regulation (Case study of Moldova)

    International Nuclear Information System (INIS)

    Buzdugan, Artur; Buzdugan, Aurelian

    2010-01-01

    Authors present arguments for establishing of technical and scientific support organizations (TSO) infrastructure as obligatory components of the national radiation protection and nuclear safety infrastructure. In the small countries, like the Republic of Moldova, characterized by insufficient development of nuclear technologies, different social, economic, scientific and, why not, national peculiarities impose opportunity of efficient interaction of regulatory body with TSO. Are presents certain examples of interaction of those organizations. As mentioned, that synergy of such interaction will contribute essentially in implementation of adequate nuclear culture in the country. (author)

  12. Information support of monitoring of technical condition of buildings in construction risk area

    Science.gov (United States)

    Skachkova, M. E.; Lepihina, O. Y.; Ignatova, V. V.

    2018-05-01

    The paper presents the results of the research devoted to the development of a model of information support of monitoring buildings technical condition; these buildings are located in the construction risk area. As a result of the visual and instrumental survey, as well as the analysis of existing approaches and techniques, attributive and cartographic databases have been created. These databases allow monitoring defects and damages of buildings located in a 30-meter risk area from the object under construction. The classification of structures and defects of these buildings under survey is presented. The functional capabilities of the developed model and the field of it practical applications are determined.

  13. Effects of Demographic Characteristics, Educational Background, and Supporting Factors on ICT Readiness of Technical and Vocational Teachers in Malaysia

    Science.gov (United States)

    Alazzam, Abu-Obaideh; Bakar, Ab Rahim; Hamzah, Ramlah; Asimiran, S.

    2012-01-01

    The aim of this study was to examine ICT readiness and the effects of demographic characteristics, educational background, and support factors on the ICT readiness of technical and vocational teachers in Malaysia. The questionnaire was administered to 329 technical and vocational teachers who are teaching engineering subjects in Malaysian…

  14. Technical data summary supporting the spent nuclear fuel environmental impact statement, November 1993

    International Nuclear Information System (INIS)

    Geddes, R.L.; Claxton, R.E.; Lengel, J.D.

    1993-11-01

    This report has been compiled by the WSRC Nuclear Materials Processing Division's Planning Section at the request of the Office of Spent Fuel Management and Special Projects (EM-37) to support issuance of the Spent Nuclear Fuel Environmental Impact Statement. Savannah River site data evaluates five programmatic options including open-quotes No Actionclose quotes ranging up to transfer of all DOE responsibility spent fuel to the SRS. For each option, a range of management/disposition scenarios has been examined. Each case summary provides information relative to the technical proposal, technical issues, environmental impacts, and projected costs for a 50 period (to 2044) when it is assumed that the material will be dispositioned from the SRS. It must be recognized that this report was prepared under severe time constraints and contains many simplifications and assumptions. It is highly recommended that significant additional study be performed before basing key decisions upon the data contained in this report. It represents a best effort by a significant group of technical personnel familiar with nuclear materials processing, handlings and storage but it is likely that careful scrutiny will reveal numerous discrepancies and omissions. The bulk of the effort went into defining the engineering approaches necessary to execute the various mission scenarios. Collection and/or calculation of much of the various waste, emission, and utility consumption data, so important to an Environmental Impact Statement, has not been completed at this time

  15. (Review Draft) Radiation Site Cleanup Regulations: Technical Support Document For The Development Of Radionuclide Cleanup Levels For Soil

    Science.gov (United States)

    This document describes parts of the technical analysis being undertaken in support of standards that ensure certain sites are cleaned up to a level that is protective of human health and the environment before they are released for public use.

  16. ANL Technical Support Program for DOE Environmental Restoration and Waste Management

    International Nuclear Information System (INIS)

    Bates, J.K.; Bradley, C.R.; Buck, E.C.; Cunnane, J.C.; Dietz, N.L.; Ebert, W.L.; Emery, J.W.; Feng, X.; Gerding, T.J.; Gong, M.; Hoh, J.C.; Mazer, J.J.; Wronkiewicz, D.J.; Bourcier, W.L.; Morgan, L.E.; Nielsen, J.K.; Steward, S.A.; Ewing, R.C.; Wang, L.M.; Han, W.T.; Tomozawa, M.

    1992-03-01

    This report provides an overview of progress during FY 1991 for the Technical Support Program that is part of the ANL Technology Support Activity for DOE, Environmental Restoration and Waste Management (EM). The purpose is to evaluate, before hot start-up of the Defenses Waste Processing Facility (DWPF) and the West Valley Demonstration Project (WVDP), factors that are likely to affect glass reaction in an unsaturated environment typical of what may be expected for the candidate Yucca Mountain repository site. Specific goals for the testing program include the following: (1) to review and evaluate available information on parameters that will be important in establishing the long-term performance of glass in a repository environment; (2) to perform testing to further quantify the effects of important variables where there are deficiencies in the available data; and (3) to initiate long-term testing that will bound glass performance under a range of conditions applicable to repository disposal

  17. Manpower development for safe operation of nuclear power plant. China. Seminar on the technical support functions. Activity: 6.1.1-Task-03. Technical report

    International Nuclear Information System (INIS)

    Kofron, K.L.

    1994-01-01

    The seminar was held in Wuhan PRC from 01.10/94 - 01/14/94. It revolved about the role of the Technical Support Groups, both onsite and offsite, of the Nuclear Power Plant. This was to assist the Chinese in deciding their best course of action for the establishment and operation of this group

  18. Dismantling of civilian nuclear powered fleet technical support vessels. engineering solutions - 59386

    International Nuclear Information System (INIS)

    Kulikov, Konstantin N.; Nizamutdinov, Rinat A.; Abramov, Andrey N.

    2012-01-01

    At the present time six nuclear technical support vessels are operated and maintained by Atomflot. Two of them (Volodarsky FTB (floating technical base) and Lepse FTB) were taken out of service for decommissioning and are stored afloat. One more vessel Lotta FTB should be decommissioned during next two years. The nuclear technological support ships carrying spent nuclear fuel (SNF), liquid and solid radioactive wastes (LRW and SRW) appear to be a possible radiation contamination of Murmansk region and Kola Bay because the Ship long-term storage afloat has the negative effect on hull's structures technical condition. As a result of this in the context of the Federal Program 'Nuclear and Radiation Safety' (2008-2015) NIPTB Onega OAO was engaged by state corporation Rosatom to develop the dismantling procedure for Volodarsky FTB and Lotta FTB. Before developing of nuclear technological support ships decommissioning projects the technical and economic assessment of decommissioning/dismantling was carried out. The following options were examined: - formation of module as one-piece Ship's hull for long-term storage at Saida Bay; - formation of separated modules for long-term storage at Saida Bay; - complete dismantling of hull's structures, systems and equipment with packing all generated SRW into certified long-term storage containers. This paper contains description of options, research procedure, comparative analysis of options of decommissioning and dismantling (D and D) of nuclear technological support ships and its difference with dismantling of nuclear submarine. On the basis of the technical and economic assessment of FTB D and D options the least expensive on the first D and D stage and the least duration option is the option 1 (Formation of module as one-piece Ship's hull for long-term storage at Saida Bay). By the implementation of the given option there will be the need of large areas for modules storage at Saida Bay. It was not considered while working out

  19. Impact of renewables on electricity markets – Do support schemes matter?

    International Nuclear Information System (INIS)

    Winkler, Jenny; Gaio, Alberto; Pfluger, Benjamin; Ragwitz, Mario

    2016-01-01

    Rising renewable shares influence electricity markets in several ways: among others, average market prices are reduced and price volatility increases. Therefore, the “missing money problem” in energy-only electricity markets is more likely to occur in systems with high renewable shares. Nevertheless, renewables are supported in many countries due to their expected benefits. The kind of support instrument can however influence the degree to which renewables influence the market. While fixed feed-in tariffs lead to higher market impacts, more market-oriented support schemes such as market premiums, quota systems and capacity-based payments decrease the extent to which markets are affected. This paper analyzes the market impacts of different support schemes. For this purpose, a new module is added to an existing bottom-up simulation model of the electricity market. In addition, different degrees of flexibility in the electricity system are considered. A case study for Germany is used to derive policy recommendations regarding the choice of support scheme. - Highlights: •Renewable support schemes matter regarding the impact on electricity markets. •Market-oriented support schemes reduce the impact on electricity markets. •More flexible electricity systems reduce the need for market participation. •Sliding premiums combine market integration with a productive risk allocation.

  20. Technical data summary supporting the spent nuclear fuel environment impact statement, March 1994

    International Nuclear Information System (INIS)

    Geddes, R.L.; Claxton, R.E.; Lengel, J.D.

    1994-03-01

    This report has been compiled by the WSRC Nuclear Materials Processing Division's Planning Section at the request of the Office of Spent Fuel Management and Special Projects (EM-37) to support issuance of the Spent Nuclear Fuel Environmental Impact Statement. Savannah River Site input data evaluates five programmatic options (including open-quotes No Actionclose quotes) ranging up to transfer of all DOE responsibility spent fuel to the SRS. For each option, a range of management/disposition scenarios has been examined. Each case summary provides information relative to the technical proposal, technical issues, environmental impacts, and projected costs for a forty year period (FY-35) when it is assumed that the material will be dispositioned from the SRS. The original issue of the report which was prepared under severe time constraints contained many simplifications and assumptions. Although the revisions have corrected some of the shortcomings of the original report, it is still highly recommended that significant additional study be performed before basing key decisions upon the data contained in this report. The data represents the best effort by a significant group of technical personnel familiar with nuclear materials processing, handling, and storage; but it is likely that careful scrutiny will reveal numerous discrepancies, inconsistencies and omissions. Nor does this report attempt to analyze every potential disposal pathway, but probably establishes the bounds for the most of the viable pathways. The bulk of the effort went into defining the engineering approaches necessary to execute the various mission scenarios which were changed since the last revision. The decision to limit reprocessing to only SRS aluminum clad required a major alteration of the TDS. Collection and/or calculation of much of the various waste, emission, and utility consumption data, so important to an EIS, has been updated since the last revision, but not thoroughly completed

  1. Electronic Communities: a Forum for Supporting Women Professionals and Students in Technical and Scientific Fields

    Science.gov (United States)

    Single, Peg Boyle; Muller, Carol B.; Cunningham, Christine M.; Single, Richard M.

    In this article, we report on electronic discussion lists (e-lists) sponsored by MentorNet, the National Electronic Industrial Mentoring Network for Women in Engineering and Science. Using the Internet, the MentorNet program connects students in engineering and science with mentors working in industry. These e-lists are a feature of MentorNet's larger electronic mentoring program and were sponsored to foster the establishment of community among women engineering and science students and men and women professionals in those fields. This research supports the hypothesis that electronic communications can be used to develop community among engineering and science students and professionals and identifies factors influencing the emergence of electronic communities (e-communities). The e-lists that emerged into self-sustaining e-communities were focused on topic-based themes, such as balancing personal and work life, issues pertaining to women in engineering and science, and job searching. These e-communities were perceived to be safe places, embraced a diversity of opinions and experiences, and sanctioned personal and meaningful postings on the part of the participants. The e-communities maintained three to four simultaneous threaded discussions and were sustained by professionals who served as facilitators by seeding the e-lists with discussion topics. The e-lists were sponsored to provide women students participating in MentorNet with access to groups of technical and scientific professionals. In addition to providing benefits to the students, the e-lists also provided the professionals with opportunities to engage in peer mentoring with other, mostly female, technical and scientific professionals. We discuss the implications of our findings for developing e-communities and for serving the needs of women in technical and scientific fields.

  2. Technical Support Document: Strategies for 50% Energy Savings in Large Office Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Leach, M.; Lobato, C.; Hirsch, A.; Pless, S.; Torcellini, P.

    2010-09-01

    This Technical Support Document (TSD) documents technical analysis that informs design guidance for designing and constructing large office buildings that achieve 50% net site energy savings over baseline buildings defined by minimal compliance with respect to ANSI/ASHRAE/IESNA Standard 90.1-2004. This report also represents a step toward developing a methodology for using energy modeling in the design process to achieve aggressive energy savings targets. This report documents the modeling and analysis methods used to identify design recommendations for six climate zones that capture the range of U.S. climate variability; demonstrates how energy savings change between ASHRAE Standard 90.1-2007 and Standard 90.1-2004 to determine baseline energy use; uses a four-story 'low-rise' prototype to analyze the effect of building aspect ratio on energy use intensity; explores comparisons between baseline and low-energy building energy use for alternate energy metrics (net source energy, energy emissions, and energy cost); and examines the extent to which glass curtain construction limits achieve energy savings by using a 12-story 'high-rise' prototype.

  3. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 23. Environmental effluent analyses

    International Nuclear Information System (INIS)

    1978-04-01

    This volume, Y/OWI/TM-36/23, ''Environmental Effluent Analysis,'' is one of a 23-volume series, ''Technical Support for GEIS: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-36, which supplements the ''Contribution to Drat Generic Environmental Impact Statement on Commercial Waste Management: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-44. The series provides a more complete technical basis for the preconceptual designs, resource requirements, and environmental source terms associated with isolating commercial LWR wastes in underground repositories in salt, granite, shale and basalt. Wastes are considered from three fuel cycles: uranium and plutonium recycling, no recycling of spent fuel and uranium-only recycling. This volume discusses the releases to the environment of radioactive and non-radioactive materials that arise during facility construction and waste handling operations, as well as releases that could occur in the event of an operational accident. The results of the analyses are presented along with a detailed description of the analytical methodologies employed

  4. Decision support for life extension of technical systems through virtual age modelling

    International Nuclear Information System (INIS)

    Pérez Ramírez, Pedro A.; Utne, Ingrid Bouwer

    2013-01-01

    This article presents a virtual age model for decision support regarding life extension of ageing repairable systems. The aim of the model is to evaluate different life extension decision alternatives and their impact on the future performance of the system. The model can be applied to systems operated continuously (e.g., process systems) and systems operated on demand (e.g., safety systems). Deterioration and efficiency of imperfect maintenance is assessed when there is limited or no degradation data, and only failure and maintenance data is available. Systems that are in operation can be studied, meaning that the systems may be degraded. The current degradation is represented by a “current virtual age”, which is calculated from recorded maintenance data. The model parameters are estimated with the maximum likelihood method. A case study illustrates the application of the model for life extension of two fire water pumps in an oil and gas facility. The performance of the pump system is assessed with respect to number of failures, safety unavailability and costs during the life extension period. -- Highlights: ► Life extension assessment of technical systems using virtual age model is proposed. ► A virtual age model is generalised for systems in stand-by and continuous operation. ► The concept of current virtual age describes technical condition of the system. ► Different decision alternatives for life extension can be easily analysed. ► The decision process is improved even when only scarce failure data is available

  5. Technical Support to an Operating PWR vis-a-vis Safety Analysis

    International Nuclear Information System (INIS)

    Gul, Subhan; Khan, M.; Chughtai, M. Kamran

    2011-01-01

    Currently a PWR of 300 MWe capacity CHASNUPP-I is in operation since the year 2000. Technical support being provided includes in-core fuel management and corresponding safety analysis for the reshuffled core for the next cycle. Currently calculation and analysis were performed for Cycle 6 to achieve the safe and economical loading pattern. The technique used is designated as out in mode (modified). In this technique, most of the fresh fuel assemblies are not directly located at the periphery of the core, but near the boundary. This technique has the advantage that without using burnable absorber we can design a low leakage core with extended cycle and maximum batch averaged burnup. (author)

  6. Computer systems in the operation, maintenance and technical support of Loviisa NPS

    International Nuclear Information System (INIS)

    Tiitinen, M.

    1993-01-01

    A description is given of how the Loviisa nuclear power plant has utilized computers in many ways in the operation, maintenance, technical support and in other functions at the plant. The evolution of the computer system can be divided into the following phases: plant commissioning (1975-80), maintenance systems development (1981-84), second generation systems take-over (1985-90) and workstation client/server systems and PC's proliferation (1991->). A short description is given of the main systems at the Loviisa plant using computers, i.e. process computer systems, the plant information system, training simulator, vibration monitoring, laboratory computer systems, PC and workstation applications. (Z.S.) 4 refs

  7. Impact of Nuclear Technology to the National Socio-Economy: Technical Support by Nuclear Malaysia

    International Nuclear Information System (INIS)

    Hazmimi Kasim; Ainul Hayati Daud; Jamal Khaer Ibrahim; Alawiah Musa

    2011-01-01

    In Malaysia, the development of nuclear technology began in the year 1972. More than 30 years of application, today, the technology made impact to the national socio-economy through contribution to GDP and; improving quality of life and enhanced societal well-being. The application of nuclear technology both in public and private agencies in industrial, medical and agricultural sectors were considered. In 2008, the impact of nuclear technology shows the contribution of 0.032% to the total GDP. Industry sector shows an increasing trend and is the highest contributor, while agriculture sector remains the lowest. In this regard, Malaysian Nuclear Agency (Nuclear Malaysia) played an important role as a technical support agency in nuclear technology, as a supplier and provider for the service, training and research for the industrial, medical and agricultural sectors. (author)

  8. Technical support for the EPA cleanup rule on radioactively contaminated sites

    Energy Technology Data Exchange (ETDEWEB)

    Hull, H.B.; Newman, A.; Wolbarst, A.B. [Environmental Protection Agency, Washington, DC (United States)] [and others

    1995-12-31

    The U.S. Environmental Protection Agency (EPA) is developing a radiation site cleanup regulation for the protection of the public from radionuclide contamination at sites that are to be cleaned up and released for public use. The regulation will apply to sites under the control of Federal agencies, and to sites licensed by the Nuclear Regulatory Commission (NRC) or NRC Agreement States. The agency is therefore conducting a comprehensive technical analysis aimed at developing information that will be used to support the rule. This presentation describes the regulation and the approach developed to determine how radiological health impacts and volumes of soil requiring remediation vary as functions of the possible cleanup dose or risk level.

  9. Technical Support Document: The Development of the Advanced Energy Design Guide for Highway Lodging Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Wei; Jarnagin, Ronald E.; Gowri, Krishnan; McBride, M.; Liu, Bing

    2008-09-30

    This Technical Support Document (TSD) describes the process and methodology for development of the Advanced Energy Design Guide for Highway Lodgings (AEDG-HL or the Guide), a design guidance document intended to provide recommendations for achieving 30% energy savings in highway lodging properties over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The AEDG-HL is the fifth in a series of guides being developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA), the United States Green Buildings Council (USGBC), and the U.S. Department of Energy (DOE).

  10. Technical Support Document: Development of the Advanced Energy Design Guide for Large Hospitals - 50% Energy Savings

    Energy Technology Data Exchange (ETDEWEB)

    Bonnema, E.; Leach, M.; Pless, S.

    2013-06-01

    This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Large Hospitals: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-LH) ASHRAE et al. (2011b). The AEDG-LH is intended to provide recommendations for achieving 50% whole-building energy savings in large hospitals over levels achieved by following Standard 90.1-2004. The AEDG-LH was created for a 'standard' mid- to large-size hospital, typically at least 100,000 ft2, but the strategies apply to all sizes and classifications of new construction hospital buildings. Its primary focus is new construction, but recommendations may be applicable to facilities undergoing total renovation, and in part to many other hospital renovation, addition, remodeling, and modernization projects (including changes to one or more systems in existing buildings).

  11. Transformation of Nuclear Malaysia into Research and Development Organisation and Technical Support Organisation (TSO++): Restructuring Study

    International Nuclear Information System (INIS)

    Muhd Noor Muhd Yunus; Ariff Shah Ismail; Prak Tom, P.P.

    2011-01-01

    Malaysian Nuclear Agency (Nuklear Malaysia), formerly known as Malaysian Institute for Nuclear Technology Research (MINT) was established on September 1972. As an agency under the purview of Ministry of Science, Technology and Innovation (MOSTI), Nuklear Malaysia has a role to introduce and promote the application of nuclear science and technology for national development. Besides that, Nuklear Malaysia plays important role in providing quality and best-in-class research towards comprehensively generating new technologies in nuclear field. For the past few years, the government has been studying the possibility of deploying nuclear energy for electricity generation. On 11th January 2011, Y.A.B Prime Minister announced the establishment of Malaysian Nuclear Power Cooperation (MNPC) that is responsible to plan, spearhead and coordinate the implementation of nuclear energy development program for Malaysia and to take the necessary action to realize the development of the first nuclear power plant (NPP) in Malaysia. This is a strong and significant indication that Malaysia is seriously considering to embark into nuclear power program. As an agency that has been involve in nuclear field for the past few decades, Nuklear Malaysia has been identified as Technical Support Organisation (TSO) for the NPP project. Since then, preparation for transforming Nuklear Malaysia into TSO has been started. One of the areas that have been studied is the preparedness of organizations structure to effectively uphold the responsibilities of TSO. This paper briefly describes attributes of TSO, example of effective TSO organizations and study that has been conducted in preparation of Nuklear Malaysia to be Research and Development and Technical Support Organization (TSO++). (author)

  12. Technical support and preparations for the response to radiological emergencies; Soporte tecnico y preparativos para la respuesta a emergencias radiologicas

    Energy Technology Data Exchange (ETDEWEB)

    Cardenas H, J; Ramos V, E O; Fernandez G, I M; Capote F, E; Zerquera J, T; Garcia L, O; Lopez B, G; Molina P, D; Lamdrid B, A I; Benitez N, J C; Salgado M, M [CPHR, Calle 20 No. 4113, e/41 y 47 Playa, CP 11300, La Habana (Cuba); Lopez F, Y; Jerez V, P [CNSN, Calle 28 e/5ta y 7ta, Playa, La Habana (Cuba)

    2006-07-01

    The work picks up the efforts directed to elevate the technical capacity of the answer in front of the radiological emergencies. Expressing them by means of the actions carried out as for teaching, research and development and intervention before accidental radiological events. The same one reflects the leading role of the participant institutions in those marks of the answer system to radiological emergencies that for its technical level it satisfies the national and international demands in the matter. In execution of the mentioned goals research projects guided to endow to the national system of methodologies and procedures for the administration of radiological emergencies have been executed that favor the improvement of its technical and organizational capacities. As well as the postulates of the National Plan of Measures for Case of Catastrophes in the corresponding to radiological accidents. (Author)

  13. Potential for low fracture toughness and lamellar tearing on PWR steam generator and reactor coolant pump supports. Resolution of generic technical activity A-12

    International Nuclear Information System (INIS)

    Snaider, R.P.; Hodge, J.M.; Levin, H.A.; Zudans, J.J.

    1979-10-01

    This report summarizes work performed by the Nuclear Regulatory Commission staff and its contractor, Sandia Laboratories, in the resolution of Generic Technical Activity A-12, ''Potential for Low Fracture Toughness and Lamellar Tearing in PWR Steam Generator and Reactor Coolant Pump Supports.'' The report describes the technical issues, the technical studies performed by Sandia describes the technical issues, the technical studies performed by Sandia Laboratories, the NRC staff's technical positions based on these studies, and the staff's plan for implementing its technical positions. It also provides recommendations for further work. The complete technical input from Sandia Laboratories is appended to the report

  14. Challenges in developing TSO to provide technical support in nuclear safety and security to Pakistan Nuclear Regulatory Authority

    International Nuclear Information System (INIS)

    Mallick, Shahid A.; Sherwani, Uzman Habib; Mehdi, M. Ammar

    2010-01-01

    This paper highlights the needs for the establishment of a technical support organization (TSO) in Pakistan Nuclear Regulatory Authority (PNRA), challenges faced during its development, application of training need assessment required for the competency development of its technical manpower and difficulties encountered after its evolution. Key issues addressed include recruitment of technical manpower and enhancing their competencies, acquisition of proper tools required for safety review and assessment, development of a sustainable education and training program consistent with the best international practices and taking the measures to get confidence of the regulatory body. (author)

  15. Computer Support of Semantic Text Analysis of a Technical Specification on Designing Software

    OpenAIRE

    Zaboleeva-Zotova, Alla; Orlova, Yulia

    2009-01-01

    The given work is devoted to development of the computer-aided system of semantic text analysis of a technical specification. The purpose of this work is to increase efficiency of software engineering based on automation of semantic text analysis of a technical specification. In work it is offered and investigated a technique of the text analysis of a technical specification is submitted, the expanded fuzzy attribute grammar of a technical specification, intended for formaliza...

  16. Technical Support Document: The Development of the Advanced Energy Design Guide for Small Retail Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Bing; Jarnagin, Ronald E.; Winiarski, David W.; Jiang, Wei; McBride, Merle F.; Crall, C.

    2006-09-30

    The Advanced Energy Design Guide for Small Retail Buildings (AEDG-SR) was developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA), the United States Green Buildings Council (USGBC), and the Department of Energy (DOE). The guide is intended to offer recommendations to achieve 30% energy savings and thus to encourage steady progress towards net-zero energy buildings. The baseline level energy use was set at buildings built at the turn of the millennium, which are assumed to be based on ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings (refer to as the ?Standard? in this report). ASHRAE and its partners are engaged in the development of a series of guides for small commercial buildings, with the AEDG-SR being the second in the series. Previously the partnership developed the Advanced Energy Design Guide for Small Office Buildings: Achieving 30% Energy Savings Over ANSI/ASHRAE/IESNA Standard 90.1-1999, which was published in late 2004. The technical support document prepared by PNNL details how the energy analysis performed in support of the Guide and documents development of recommendation criteria.

  17. Knowledge Management in Scientific and Technical Support Organizations for Regulatory Bodies: SEC NRS Experience

    International Nuclear Information System (INIS)

    Saulskaya, N.

    2016-01-01

    Full text: Nuclear industry, similar to other high-tech industries, is based on knowledge and to a great extent depends on personnel qualification, their skills and abilities. Knowledge management processes were recognized of the utmost importance for the IAEA. The IAEA GA adopted a number of resolutions on nuclear knowledge. In this context, knowledge management is considered as an integrated, systematic approach to the process of assessment, obtaining, development, distribution, use, transfer and maintenance of knowledge related to achievement of strategic targets of organization development. KM makes it possible to learn lessons from its own experience. The report presents a long-term experience of SEC NRS in knowledge management and capacity building, which is critically important for SEC NRS as scientific and technical support organization for Rostechnadzor. KM in SEC NRS is performed through the HRM, primarily through HRD, assessment, motivation of the labor activity, and regulation of social-psychological processes. The practice of implementation of NKM through the functions of human resources management is of particular interest for embarking countries. The best practices will be reflected in the IAEA Safety Report “Knowledge Management for Regulatory Bodies and TSO”, which is currently being developed by a team of the IAEA experts. (author

  18. SPP Toolbox: Supporting Sustainable Public Procurement in the Context of Socio-Technical Transitions

    Directory of Open Access Journals (Sweden)

    Paula Cayolla Trindade

    2017-12-01

    Full Text Available Public procurement can shape production and consumption trends and represents a stimulus for both innovation and diversification in products and services, through a direct increase in demand. In recent years, the interest in demand-side policies has grown and several approaches have emerged, such as Green Public Procurement (GPP, Sustainable Public Procurement (SPP and Public Procurement of Innovation (PPI, representing strategic goals to be achieved through public procurement. In this context, there is a need to guide and support public organizations in the uptake of GPP, SPP and PPI practices. To respond to the challenges raised by the operationalization of such strategies, this paper proposes a new tool—the SPP Toolbox—for guiding public organizations as they re-think the procurement process, raising their ambitions and broadening their vision, thus changing the organizational approach towards culture, strategies, structures and practices. This toolbox integrates insights from GPP, SPP and PPI objectives and practices, in the context of the emergence of socio-technical transitions. The toolbox coherently links GPP, SPP and PPI, allowing flexibility in terms of goals, yet promoting an increasing complexity of institutionalized practices and skills—from GPP to SPP and then from SPP to PPI, organized in a framework fully integrated into the organizational strategy.

  19. For optimum safety technologies: understanding relations between the different national authorities and the technical support organizations

    International Nuclear Information System (INIS)

    Mahmoud, N.S.; Mostafa Aziz, Mostafa

    2010-01-01

    TSOs describe expert independent organizations, which provide supports for government, regulatory authorities, utilities and industry. The TSO must dispose different competences and objectives in order to deliver to the four independent authorities the technical and scientific knowledge. This comprehensive knowledge, from TSO, should perform through the research and development activities (R and D). Concerning the government, TSOs consider the R and D on the management procedures to characterize the links, to differentiate roles to prevent the overlapping efforts, and finally to build a central data bank in nuclear technologies for the other three authorities. For regulatory organizations, R and D are involved in the regulatory requirements and surveillance processes. On the other side R and D, in case of utilities, activities should focus on the improvement of safety operations for nuclear power and its new generations, and for other nuclear/radiological facilities. Finally, the forth TSOs has R and D targets that should concentrate mainly on material, efficiency, and durability of different equipment and parts involved in the nuclear activities during manufacturing. (author)

  20. NASA’s Universe of Learning: Engaging Subject Matter Experts to Support Museum Alliance Science Briefings

    Science.gov (United States)

    Marcucci, Emma; Slivinski, Carolyn; Lawton, Brandon L.; Smith, Denise A.; Squires, Gordon K.; Biferno, Anya A.; Lestition, Kathleen; Cominsky, Lynn R.; Lee, Janice C.; Rivera, Thalia; Walker, Allyson; Spisak, Marilyn

    2018-06-01

    NASA's Universe of Learning creates and delivers science-driven, audience-driven resources and experiences designed to engage and immerse learners of all ages and backgrounds in exploring the universe for themselves. The project is a unique partnership between the Space Telescope Science Institute, Caltech/IPAC, Jet Propulsion Laboratory, Smithsonian Astrophysical Observatory, and Sonoma State University and is part of the NASA SMD Science Activation Collective. The NASA’s Universe of Learning projects pull on the expertise of subject matter experts (scientist and engineers) from across the broad range of NASA Astrophysics themes and missions. One such project, which draws strongly on the expertise of the community, is the NASA’s Universe of Learning Science Briefings, which is done in collaboration with the NASA Museum Alliance. This collaboration presents a monthly hour-long discussion on relevant NASA astrophysics topics or events to an audience composed largely of informal educators from informal learning environments. These professional learning opportunities use experts and resources within the astronomical community to support increased interest and engagement of the informal learning community in NASA Astrophysics-related concepts and events. Briefings are designed to create a foundation for this audience using (1) broad science themes, (2) special events, or (3) breaking science news. The NASA’s Universe of Learning team engages subject matter experts to be speakers and present their science at these briefings to provide a direct connection to NASA Astrophysics science and provide the audience an opportunity to interact directly with scientists and engineers involved in NASA missions. To maximize the usefulness of the Museum Alliance Science Briefings, each briefing highlights resources related to the science theme to support informal educators in incorporating science content into their venues and/or interactions with the public. During this

  1. Human System Simulation in Support of Human Performance Technical Basis at NPPs

    Energy Technology Data Exchange (ETDEWEB)

    David Gertman; Katya Le Blanc; alan mecham; william phoenix; Magdy Tawfik; Jeffrey Joe

    2010-06-01

    This paper focuses on strategies and progress toward establishing the Idaho National Laboratory’s (INL’s) Human Systems Simulator Laboratory at the Center for Advanced Energy Studies (CAES), a consortium of Idaho State Universities. The INL is one of the National Laboratories of the US Department of Energy. One of the first planned applications for the Human Systems Simulator Laboratory is implementation of a dynamic nuclear power plant simulation (NPP) where studies of operator workload, situation awareness, performance and preference will be carried out in simulated control rooms including nuclear power plant control rooms. Simulation offers a means by which to review operational concepts, improve design practices and provide a technical basis for licensing decisions. In preparation for the next generation power plant and current government and industry efforts in support of light water reactor sustainability, human operators will be attached to a suite of physiological measurement instruments and, in combination with traditional Human Factors Measurement techniques, carry out control room tasks in simulated advanced digital and hybrid analog/digital control rooms. The current focus of the Human Systems Simulator Laboratory is building core competence in quantitative and qualitative measurements of situation awareness and workload. Of particular interest is whether introduction of digital systems including automated procedures has the potential to reduce workload and enhance safety while improving situation awareness or whether workload is merely shifted and situation awareness is modified in yet to be determined ways. Data analysis is carried out by engineers and scientists and includes measures of the physical and neurological correlates of human performance. The current approach supports a user-centered design philosophy (see ISO 13407 “Human Centered Design Process for Interactive Systems, 1999) wherein the context for task performance along with the

  2. A conservation ontology and knowledge base to support delivery of technical assistance to agricultural producers in the united states

    Science.gov (United States)

    Information systems supporting the delivery of conservation technical assistance by the United States Department of Agriculture (USDA) to agricultural producers on working lands have become increasingly complex over the past 25 years. They are constrained by inconsistent coordination of domain knowl...

  3. Using open technical e-learning standards and service-orientation to support new forms of e-assessment

    NARCIS (Netherlands)

    Miao, Yongwu; Tattersall, Colin; Schoonenboom, Judith; Stevanov, Krassen; Aleksieva-Petrova, Adelina

    2007-01-01

    Miao, Y., Tattersall, C., Schoonenboom, J., Stevanov, K., & Aleksieva-Petrova, A. (2007). Using open technical e-learning standards and service-orientation to support new forms of e-assessment. In D. Griffiths, R. Koper & O. Liber (Eds.), Proceedings of the second TENCompetence Open Workshop on

  4. Technical Issues Map for the NHI System Interface and Support Systems Area: 2nd Quarter FY07

    International Nuclear Information System (INIS)

    Steven R. Sherman

    2007-01-01

    This document provides a mapping of technical issues associated with development of the Next Generation Nuclear Plant (NGNP) intermediate heat transport loop and nuclear hydrogen plant support systems to the work that has been accomplished or is currently underway in the 2nd quarter of FY07

  5. RE: Request for Correction, Technical Support Document, Greenhouse Gas Emissions Reporting from the Petroleum and Natural Gas Industry

    Science.gov (United States)

    The Industrial Energy Consumers of America (IECA) joins the U.S. Chamber of Commerce in its request for correction of information developed by the Environmental Protection Agency (EPA) in a background technical support document titled Greenhouse Gas Emissions Reporting from the Petroleum and Natural Gas Industry

  6. 78 FR 13563 - Energy Conservation Program: Availability of the Preliminary Technical Support Document for...

    Science.gov (United States)

    2013-02-28

    ... identify and resolve issues involved in the preliminary analyses. Chapter 2 of the preliminary technical... DOE conducted in-depth technical analyses in the following areas for GSFLs and IRLs currently under... also begun work on the manufacturer impact analysis and identified the methods to be used for the LCC...

  7. Guidance document for revision of DOE Order 5820.2A, Radioactive Waste Technical Support Program

    International Nuclear Information System (INIS)

    Kudera, D.E.; McMurtrey, C.D.; Meagher, B.G.

    1993-04-01

    This document provides guidance for the revision of DOE Order 5820.2A, ''Radioactive Waste Management.'' Technical Working Groups have been established and are responsible for writing the revised order. The Technical Working Groups will use this document as a reference for polices and procedures that have been established for the revision process. The overall intent of this guidance is to outline how the order will be revised and how the revision process will be managed. In addition, this document outlines technical issues considered for inclusion by a Department of Energy Steering Committee

  8. Engineering Technical Support Center, Innovative Science and Technical Support for Cost-Effective Cleanups: Five Year Summary Report for 2007-2012

    Science.gov (United States)

    This report summarizes a variety of significant projects that ETSC and its colleagues in the Land Remediation and Pollution Control Division (LRPCD) have supported during the last five years. Projects have addressed an array of environmental scenarios, including remote mining co...

  9. GPHS-RTGs in support of the Cassini Mission. Semi annual technical report, 30 September 1996--30 March 1997

    International Nuclear Information System (INIS)

    1997-01-01

    The technical progress achieved during the period 27 January through 30 September 1996 through 30 March 1997 on Contract DE-AC03-91SF18852 Radioisotope Thermoelectric Generators and Ancillary Activities is described. This report is organized by program task structure: spacecraft integration and liaison; engineering support; safety; qualified unicouple production; ETG fabrication, assembly, and test; ground support equipment (GSE); RTG shipping and launch support; designs, reviews, and mission applications; project management, quality assurance, reliability, contract changes, CAGO acquisition (operating funds), and CAGO maintenance and repair; and CAGO acquisition (capital funds)

  10. Diagnostic development and support of MHD test facilities: Technical progress report for the period January, February, March 1985

    International Nuclear Information System (INIS)

    Shepard, W.S.; Cook, R.L.

    1985-04-01

    Mississippi State University is developing diagnostic instruments for MHD power train data acquisition and for support of MHD component development test facilities. Microprocessor-controlled optical instruments, initially developed for HRSR support, are being refined, and new systems to measure temperatures and gas-seed-slag stream characteristics are being developed. To further data acquisition and analysis capabilities, the diagnostic systems are being interfaced with MHD Energy Center computers. Additionally, technical support of the diagnostic needs of the national MHD research effort is being provided

  11. Influence of natural organic matter (NOM) coatings on nanoparticle adsorption onto supported lipid bilayers.

    Science.gov (United States)

    Bo, Zhang; Avsar, Saziye Yorulmaz; Corliss, Michael K; Chung, Minsub; Cho, Nam-Joon

    2017-10-05

    As the worldwide usage of nanoparticles in commercial products continues to increase, there is growing concern about the environmental risks that nanoparticles pose to biological systems, including potential damage to cellular membranes. A detailed understanding of how different types of nanoparticles behave in environmentally relevant conditions is imperative for predicting and mitigating potential membrane-associated toxicities. Herein, we investigated the adsorption of two popular nanoparticles (silver and buckminsterfullerene) onto biomimetic supported lipid bilayers of varying membrane charge (positive and negative). The quartz crystal microbalance-dissipation (QCM-D) measurement technique was employed to track the adsorption kinetics. Particular attention was focused on understanding how natural organic matter (NOM) coatings affect nanoparticle-bilayer interactions. Both types of nanoparticles preferentially adsorbed onto the positively charged bilayers, although NOM coatings on the nanoparticle and lipid bilayer surfaces could either inhibit or promote adsorption in certain electrolyte conditions. While past findings showed that NOM coatings inhibit membrane adhesion, our findings demonstrate that the effects of NOM coatings are more nuanced depending on the type of nanoparticle and electrolyte condition. Taken together, the results demonstrate that NOM coatings can modulate the lipid membrane interactions of various nanoparticles, suggesting a possible way to improve the environmental safety of nanoparticles. Copyright © 2017 Elsevier B.V. All rights reserved.

  12. Technical Support Document: Development of the Advanced Energy Design Guide for Small Office Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Jarnagin, Ronald E.; Liu, Bing; Winiarski, David W.; McBride, Merle F.; Suharli, L.; Walden, D.

    2006-11-30

    This Technical Support Document (TSD) describes the process and methodology for the development of the Advanced Energy Design Guide for Small Office Buildings (AEDG-SO), a design guidance document intended to provide recommendations for achieving 30% energy savings in small office buildings over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The AEDG-SO is the first in a series of guides being developed by a partnership of organizations, including the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IESNA), the New Buildings Institute (NBI), and the U.S. Department of Energy (DOE). Each of the guides in the AEDG series will provide recommendations and user-friendly design assistance to designers, developers and owners of small commercial buildings that will encourage steady progress towards net-zero energy buildings. The guides will provide prescriptive recommendation packages that are capable of reaching the energy savings target for each climate zone in order to ease the burden of the design and construction of energy-efficient small commercial buildings The AEDG-SO was developed by an ASHRAE Special Project committee (SP-102) made up of representatives of each of the partner organizations in eight months. This TSD describes the charge given to the committee in developing the office guide and outlines the schedule of the development effort. The project committee developed two prototype office buildings (5,000 ft2 frame building and 20,000 ft2 two-story mass building) to represent the class of small office buildings and performed an energy simulation scoping study to determine the preliminary levels of efficiency necessary to meet the energy savings target. The simulation approach used by the project committee is documented in this TSD along with

  13. MOTOR 2.0: module for transformation of organic matter and nutrients in soil; user guide and technical documentation

    NARCIS (Netherlands)

    Assinck, F.B.T.; Rappoldt, C.

    2004-01-01

    MOTOR is a MOdule describing the Transformation of Organic matteR and nutrients in soil. It calculates the transformations between pools of organic matter and mineral nitrogen in soil. Pools are characterized by a carbon and nitrogen content and can be labelled. MOTOR is a flexible tool because the

  14. Research on technical trading and market efficiency : a trader's perspective

    OpenAIRE

    Vico-Ivanina, Julianna V.

    2012-01-01

    Research on the predictive power of technical analysis is a matter of controversy. The objective of this thesis is to look at the empirical research done on technical trading and see how the results can be used from a trader’s perspective. Some results provide strong support for the technical trading and propose useful trading strategies. However, there are some limitations regarding transaction costs, risk adjustment, and statistical tests. Technical research has developed new methodology ap...

  15. New handling systems as technical support for the working process. Part 6. Feeding devices

    Energy Technology Data Exchange (ETDEWEB)

    Becher, H; Burkhardt, R; Drexel, P; Graf, B; Krreis, W

    1982-03-01

    Social, technical and economic reasons require an enhanced application of handling systems such as industrial robots. Quality and efficiency of an industrial robot depends greatly on feeding devices, and the ARGE-HHS within its project new handling systems as a technical aid in the working process intends to analyze all feeding devices that are likely to be most suitable for advanced applications. Forty one feeding devices were developed, known devices were modified, adapted to different applications, and tested. A variety of feeding devices for most applications in the field of material handling is reported.

  16. Performance-based service acquisition (PBSA) of TRIDENT strategic weapons systems (SWS) technical engineering support (TES) services

    OpenAIRE

    Arcidiacono, William J.

    2003-01-01

    CIVINS (Civilian Institutions) Thesis document Approved for public release ; distribution is unlimited The objective of this thesis is to determine whether the Strategic Systems Programs (SSP) should apply the concepts of Performance-Based Service Acquisition (PBSA) to Strategic Weapons Systems (SWS) Technical Engineering Support (TES) Services. This thesis provides a Department of Defense (DoD), Department of the Navy (DON), and SSP SWS program acquisition and PBSA history background, ...

  17. Summary of breakout Session F1: F1, decision support systems - technical databases

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    The discussions in breakout session F1 are summarized. The topics discussed include oil properties database, case histories database, technical experts database, sorbents database, dispersants database, equipment inventories, and response information. General comments and concerns were discussed and major research issues outlines

  18. Hungarian experience in the role of a Technical Support Organization - Expert support and R and D activities in nuclear safeguards and forensics, participation in international cooperation

    International Nuclear Information System (INIS)

    Szeles, E.; Kovacs, A.; Biro, T.

    2010-01-01

    The Institute of Isotopes (IoI) of the Hungarian Academy of Sciences has been - since the mid-fifties - engaged not only in basic and applied research related to the use of radioisotopes in Hungary but also in the production, trade and safety of radioisotopes supported by the central accountancy at national level. Based on its experience and capabilities the technical tasks of nuclear safeguards and forensics have been delegated to the Institute by governmental decrees. Thus the Institute is one of the Technical Support Organizations of the Hungarian Atomic Energy Authority (HAEA) providing expert support in the areas mentioned above and maintaining the central isotope registry. An Agreement between HAEA and IoI specifies both routine and R and D activities supporting authority functions. These include the development and application of both non-destructive (i.e. gamma spectrometry, neutron-coincidence counting and laser ablation inductively coupled plasma mass spectrometry) and destructive (i.e. inductively coupled plasma mass spectrometry) analytical methods to satisfy domestic needs as well as to explore novel methods both for safeguards and nuclear forensics purposes. Methods have been developed to identify and quantify nuclear material in fresh and spent fuel assemblies and to characterize seized or found nuclear material of unknown origin and also environmental samples. The validation of these measurement methods have been performed in inter-laboratory comparisons organized by the Joint Research Centers of the European Union and by other international organizations such as IAEA and the International Technical Working Group on Nuclear Smuggling (ITWG). The presentation describes TSO activities both at domestic level and in potential international cooperation initiatives. The need of regional cooperation is emphasized discussing advantages and difficulties. (author)

  19. Evaluation of decision making in technical support center for effective severe accident management

    International Nuclear Information System (INIS)

    Huh, C.; Suh, N.

    2010-01-01

    We have evaluated the technical and organizational aspect of the current SAMG focusing on the decision making process in TSC. Technically, we found that the current SAMG is a good software kind of tool which can help operators to manage the severe accident. But the clear cutting of EOP and SAMG, shift of plant control from MCR to TSC seems to have no firm ground to be accepted as it is. Study on the organizational behavior shows that the group decision under risky situation will be inevitably polarized either toward risky or cautious way. Since the current SAMG makes TSC to evaluate the pros and cons of strategies to be implemented and choose one based on group decision, we are not free of this group polarization phenomenon. We propose that the proven organization of EOP needs to be maintained and also that the SAMG needs to be more proceduralized. (authors)

  20. Technical devices of powered roof support for the top coal caving as automation objects

    Science.gov (United States)

    Nikitenko, M. S.; Kizilov, S. A.; Nikolaev, P. I.; Kuznetsov, I. S.

    2018-05-01

    In the paper technical devices for the top coal caving as automation objects in the composition of the longwall mining complex (LTCC) are considered. The proposed concept for automation of the top coal caving process allows caving efficiency to be ensured, coal dilution to be prevented, conveyor overloading to be prevented, the shearer service personnel to be unloaded, the influence of the “human factor” to be reduced.

  1. FFCAct Clearinghouse, directory of abstracts: Radioactive waste technical support program. Revision 2

    International Nuclear Information System (INIS)

    1994-10-01

    The Federal Facility Compliance Act (FFCAct) Clearinghouse is a card catalog of information about the FFCAct and its requirements for developing Site Treatment Plans (STP). The information available in the clearinghouse includes abstracts describing computer applications, technical reports, and a list of technical experts. This report contains 61 abstracts from the database relating to radioactive waste management. The clearinghouse includes information on characterization, retrieval, treatment, storage, and disposal elements of waste management as they relate to the FFCAct and the treatment of mixed wastes. Subject areas of information being compiled include: commercial treatment capabilities; listings of technical experts for assistance in selecting and evaluating treatment options and technologies; mixed waste data and treatability groups; guidance on STP development; life-cycle costs planning estimates for facilities; references to documentation on available technologies and technology development activities; Waste Acceptance Criteria (WAC) for treatment facilities; regulatory, health and safety issues associated with treatment facilities and technologies; and computer databases, applications, and models for identifying and evaluating treatment facilities and technologies. Access to the FFCAct clearinghouse is available to the DOE and its DOE contractors involved in STP development and other FFCAct activities

  2. Task Order 22 – Engineering and Technical Support, Deep Borehole Field Test. AREVA Summary Review Report

    Energy Technology Data Exchange (ETDEWEB)

    Denton, Mark A. [AREVA Federal Services, Charlotte, NC (United States)

    2016-01-19

    Under Task Order 22 of the industry Advisory and Assistance Services (A&AS) Contract to the Department of Energy (DOE) DE-NE0000291, AREVA has been tasked with providing assistance with engineering, analysis, cost estimating, and design support of a system for disposal of radioactive wastes in deep boreholes (without the use of radioactive waste). As part of this task order, AREVA was requested, through a letter of technical direction, to evaluate Sandia National Laboratory’s (SNL’s) waste package borehole emplacement system concept recommendation using input from DOE and SNL. This summary review report (SRR) documents this evaluation, with its focus on the primary input document titled: “Deep Borehole Field Test Specifications/M2FT-15SN0817091” Rev. 1 [1], hereafter referred to as the “M2 report.” The M2 report focuses on the conceptual design development for the Deep Borehole Field Test (DBFT), mainly the test waste packages (WPs) and the system for demonstrating emplacement and retrieval of those packages in the Field Test Borehole (FTB). This SRR follows the same outline as the M2 report, which allows for easy correlation between AREVA’s review comments, discussion, potential proposed alternatives, and path forward with information established in the M2 report. AREVA’s assessment focused on three primary elements of the M2 report: the conceptual design of the WPs proposed for deep borehole disposal (DBD), the mode of emplacement of the WP into DBD, and the conceptual design of the DBFT. AREVA concurs with the M2 report’s selection of the wireline emplacement mode specifically over the drill-string emplacement mode and generically over alternative emplacement modes. Table 5-1 of this SRR compares the pros and cons of each emplacement mode considered viable for DBD. The primary positive characteristics of the wireline emplacement mode include: (1) considered a mature technology; (2) operations are relatively simple; (3) probability of a

  3. Technical assessment of Mir-1 life support hardware for the international space station

    Science.gov (United States)

    Mitchell, K. L.; Bagdigian, R. M.; Carrasquillo, R. L.; Carter, D. L.; Franks, G. D.; Holder, D. W., Jr.; Hutchens, C. F.; Ogle, K. Y.; Perry, J. L.; Ray, C. D.

    1994-01-01

    NASA has been progressively learning the design and performance of the Russian life support systems utilized in their Mir space station. In 1992, a plan was implemented to assess the benefits of the Mir-1 life support systems to the Freedom program. Three primary tasks focused on: evaluating the operational Mir-1 support technologies and understanding if specific Russian systems could be directly utilized on the American space station and if Russian technology design information could prove useful in improving the current design of the planned American life support equipment; evaluating the ongoing Russian life support technology development activities to determine areas of potential long-term application to the U.S. space station; and utilizing the expertise of their space station life support systems to evaluate the benefits to the current U.S. space station program which included the integration of the Russian Mir-1 designs with the U.S. designs to support a crew of six.

  4. When Family-Supportive Supervision Matters: Relations between Multiple Sources of Support and Work-Family Balance

    Science.gov (United States)

    Greenhaus, Jeffrey H.; Ziegert, Jonathan C.; Allen, Tammy D.

    2012-01-01

    This study examines the mechanisms by which family-supportive supervision is related to employee work-family balance. Based on a sample of 170 business professionals, we found that the positive relation between family-supportive supervision and balance was fully mediated by work interference with family (WIF) and partially mediated by family…

  5. Can CH-53K 3D Technical Data Support the Provisioning Process

    Science.gov (United States)

    2017-05-01

    support for all National Stock Number (NSN) items in the Federal Catalog System (FCS) used in supply management operations by the military services...Engineering Data Management Information and Control System ; SSR = supply support request. The data flow between the four activities in the... supportability re- quirements.  JEDMICS. The JEDMICS is a DoD standard engineering data manage - ment and repository system . JEDMICS provides the

  6. Employer-Supported Training in Australia: Participation, Demand and Supply. NCVER Technical Report

    Science.gov (United States)

    Shah, Chandra

    2017-01-01

    This report provides an analysis of employer-supported training in Australia. Employer-supported training is the largest share of adult education and training in all Organisation for Economic Co-operation and Development (OECD) countries. It has benefits for individuals, firms, and society. Cross-country studies have shown a positive association…

  7. Clarifying the links between social support and health: culture, stress, and neuroticism matter.

    Science.gov (United States)

    Park, Jiyoung; Kitayama, Shinobu; Karasawa, Mayumi; Curhan, Katherine; Markus, Hazel R; Kawakami, Norito; Miyamoto, Yuri; Love, Gayle D; Coe, Christopher L; Ryff, Carol D

    2013-02-01

    Although it is commonly assumed that social support positively predicts health, the empirical evidence has been inconsistent. We argue that three moderating factors must be considered: (1) support-approving norms (cultural context); (2) support-requiring situations (stressful events); and (3) support-accepting personal style (low neuroticism). Our large-scale cross-cultural survey of Japanese and US adults found significant associations between perceived support and health. The association was more strongly evident among Japanese (from a support-approving cultural context) who reported high life stress (in a support-requiring situation). Moreover, the link between support and health was especially pronounced if these Japanese were low in neuroticism.

  8. Vision and framework for technical and management support to facilitate foreign spent fuel storage and geologic disposal in Russia

    International Nuclear Information System (INIS)

    Halsey, W.G.; Jardine, L.J.; Smith, C.F.

    1999-01-01

    This 'Technical and Management Support' program would facilitate the transfer of spent fuel from commercial power plants in Taiwan to a storage and geologic repository site near Krasnoyarsk, Russia. This program resolves issues of disposition of Taiwan spent fuel (including US origin fuel) and provides revenue for Russia to develop an integrated spent fuel storage and radioactive waste management system including a geologic repository. LLNL has ongoing contracts and collaborations with all the principal parties and is uniquely positioned to facilitate the development of such a program. A three-phase approach over 20 years is proposed: namely, an initial feasibility investigation followed by an engineering development phase, and then implementation

  9. Technical Support Document: Development of the Advanced Energy Design Guide for K-12 Schools--30% Energy Savings

    Energy Technology Data Exchange (ETDEWEB)

    Pless, S.; Torcellini, P.; Long, N.

    2007-09-01

    This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for K-12 School Buildings (K-12 AEDG), a design guidance document intended to provide recommendations for achieving 30% energy savings in K-12 Schools over levels contained in ANSI/ASHRAE/IESNA Standard 90.1-1999, Energy Standard for Buildings Except Low-Rise Residential Buildings. The 30% energy savings target is the first step toward achieving net-zero energy schools; schools that, on an annual basis, draw from outside sources less or equal energy than they generate on site from renewable energy sources.

  10. Nevada Applied Ecology Information Center: a review of technical information support provided to the Nevada Applied Ecology Group

    International Nuclear Information System (INIS)

    Fore, C.S.; Pfuderer, H.A.

    1983-01-01

    The Nevada Applied Ecology Information Center (NAEIC) was established in January 1972 to serve the needs of the Nevada Applied Ecology Group (NAEG) by identifying, collecting, analyzing, and disseminating technical information relevant to NAEG programs. Since its inception, the NAEIC has been active in providing specialized information support to NAEG staff in the following research areas: (1) environmental aspects of the transuranics; (2) historic literature (pre-1962) on plutonium and uranium; (3) cleanup and treatment of radioactively contaminated land; (4) bioenvironmental aspects of europium and rhodium; (5) NAEG contractor reports; and (6) uptake of radioactivity by food crops

  11. Technical support to the Nuclear Regulatory Commission for the boiling water reactor blowdown heat transfer program

    International Nuclear Information System (INIS)

    Rice, R.E.

    1976-09-01

    Results are presented of studies conducted by Aerojet Nuclear Company (ANC) in FY 1975 to support the Nuclear Regulatory Commission (NRC) on the boiling water reactor blowdown heat transfer (BWR-BDHT) program. The support provided by ANC is that of an independent assessor of the program to ensure that the data obtained are adequate for verification of analytical models used for predicting reactor response to a postulated loss-of-coolant accident. The support included reviews of program plans, objectives, measurements, and actual data. Additional activity included analysis of experimental system performance and evaluation of the RELAP4 computer code as applied to the experiments

  12. Technical engineering services in support of the Nike-Tomahawk sounding rocket vehicle system

    Science.gov (United States)

    1972-01-01

    Task assignments in support of the Nike-Tomahawk vehicles, which were completed from May, 1970 through November 1972 are reported. The services reported include: analytical, design and drafting, fabrication and modification, and field engineering.

  13. Use of reinforced soil foundation (RSF) to support shallow foundation : technical summary report, November 2008.

    Science.gov (United States)

    2008-11-01

    The presence of a weak soil supporting structural foundations results in low load bearing capacity and : excessive settlements, which can cause structural damage, reduction in durability, and/or deterioration in : performance level. Conventional trea...

  14. ANL Technical Support Program for DOE Environmental Restoration and Waste Management. Annual report, October 1992--September 1993

    International Nuclear Information System (INIS)

    Bates, J.K.; Bourcier, W.L.; Bradley, C.R.

    1994-06-01

    This report is an overview of the progress during FY 1993 for the Technical Support Program that is part of the ANL Technology Support Activity for DOE Environmental Restoration and Waste Management (EM). The purpose is to evaluate, before hot start-up of the Defense Waste Processing Facility (DWPF) and the West Valley Demonstration Project (WVDP), factors that are anticipated to affect glass reaction in an unsaturated environment typical of what may be expected for the candidate Yucca Mountain repository site. Specific goals for the testing program include the following: reviewing and evaluating available data on parameters that will be important in establishing the long-term performance of glass in a repository environment; performing tests to further quantify the effects of important variables where there are deficiencies in the available data; and initiating long-term tests to determine glass performance under a range of conditions applicable to repository disposal

  15. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 10. Repository preconceptual design studies: granite

    International Nuclear Information System (INIS)

    1978-04-01

    This volume, Volume 10 ''Repository Preconceptual Design Studies: Granite,'' is one of a 23-volume series, ''Technical Support for GEIS: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-36, which supplements the ''Contribution to Draft Generic Environmental Impact Statement on Commercial Waste Management: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-44. The series provides a more complete technical basis for the preconceptual designs, resource requirements, and environmental source terms associated with isolating commercial LWR wastes in underground repositories in salt, granite, shale and basalt. Wastes are considered from three fuel cycles: uranium and plutonium recycling, no recycling of spent fuel and uranium-only recycling. This document describes a preconceptual design for a nuclear waste storage facility in granite. The facility design consists of several chambers excavated deep within a geologic formation together with access shafts and supportive surface structures. The facility design provides for: receiving and unloading waste containers; lowering them down shafts to the mine level; transporting them to the proper storage area, and emplacing them in mined storage rooms. Drawings of the facility design are contained in TM-36/11, ''Drawings for Repository Preconceptual Design Studies: Granite.''

  16. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 8. Repository preconceptual design studies: salt

    International Nuclear Information System (INIS)

    1978-04-01

    This volume, Volume 8 ''Repository Preconceptual Design Studies: Salt,'' is one of a 23-volume series, ''Technical Support for GEIS: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-36, which supplements the ''Contribution to Draft Generic Environmental Impact Statement on Commercial Waste Management: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-44. The series provides a more complete technical basis for the preconceptual designs, resource requirements, and environmental source terms associated with isolating commercial LWR wastes in underground repositories in salt, granite, shale and basalt. Wastes are considered from three fuel cycles: uranium and plutonium recycling, no recycling of spent fuel and uranium-only recycling. This document describes a preconceptual design for a nuclear waste storage facility in salt. The facility design consists of several chambers excavated deep within a geologic formation together with access shafts and supportive surface structures. The facility design provides for: receiving and unloading waste containers; lowering them down shafts to the mine level; transporting them to the proper storage area, and emplacing them in mined storage rooms. Drawings of the facility design are contained in TM-36/9, ''Drawings for Repository Preconceptual Design Studies: Salt.''

  17. Overview of decommissioning and decontamination technical information support activities funded by the US Department of Energy's remedial action programs

    International Nuclear Information System (INIS)

    Owen, P.T.

    1986-01-01

    In 1979 the US Department of Energy (DOE) established the Remedial Action Program Information Center (RAPIC) at the Oak Ridge National Laboratory to provide technical information support to the Surplus Facilities Management Program, DOE's national decommissioning and decontamination (D and D) program which is managed by DOE's Richland Operations Office and UNC Nuclear Industries, Inc., and to the other DOE remedial action programs. Specific information activities that RAPIC performs to support the DOE's programs and the D and D community include: maintaining a computerized bibliographic database containing about 4500 annotated citations (about 2000 on D and D) and a database of 1800 contacts involved with remedial action work at radioactively contaminated sites; publishing an annual bibliography, ''Nuclear Facility Decommissioning and Site Remedial Actions, A Selected Bibliography,'' ORNL/EIS-154 (six volumes published); maintaining a document repository and providing copies of requested publications; and performing manual and computerized searches of the technical literature. The most significant RAPIC function is serving as a focal point for D and D information. With the extensive resources at its command, RAPIC is in a unique position to provide a comprehensive information base to the D and D community. DOE makes these services available to foster good public relations and promote cooperation and information exchange

  18. An overview of remedial action technical information support activities funded by the US Department of Energy's Office of Environmental Restoration

    International Nuclear Information System (INIS)

    Owen, P.T.

    1990-01-01

    In 1979 the US Department of Energy (DOE) established the Remedial Action Program Information Center (RAPIC) at the Oak Ridge National Laboratory (ORNL) to provide technical information support to the DOE's Remedial Action Programs, which comprise: Formerly Utilized Sites Remedial Action Program (FUSRAP), Surplus Facilities Management Program (SFMP), and Uranium Mill Tailings Remedial Action Program (UMTRAP). Specific information activities that RAPIC performs to support the DOE's programs include: maintaining a computerized bibliographic database containing approximately 7000 annotated references relevant to remediation work at radioactively contaminated sites; publishing an annual bibliography, Nuclear Facility Decommissioning and Site Remedial Actions, A Selected Bibliography, ORNL/EIS-154; maintaining a document repository and providing copies of requested publications; and performing manual and computerized searches of the technical literature. The most important RAPIC function is serving as a focal point for remedial action information. With these extensive resources at its command, RAPIC is in a unique position to provide a comprehensive information base to the remedial action and environmental restoration community

  19. Technical support for open-cycle MHD program. Progress report, July--December 1978

    Energy Technology Data Exchange (ETDEWEB)

    Doss, E D [ed.

    1979-06-01

    The support program for open-cycle MHD at Argonne National Laboratory is developing the analytical tools needed to investigate the performance of the major components in the combined cycle MHD/steam power system. The analytical effort is centered on the primary components of the system that are unique to MHD and also on the integration of these analytical representations into a model of the entire power producing system. The present project activities include modeling of the combustor, MHD channel, slag separator, and high-temperature air heater. In addition, these models are combined into a complete system model, which is at present capable of carrying out optimizations of the entire system relative to either thermodynamic efficiency or cost of electrical power. Also, in support of other aspects of the open-cycle program, test plans are developed and facility and program reviews are provided upon request in support of the needs and requirements of the DOE/MHD Division.

  20. Clarifying the links between social support and health: Culture, stress, and neuroticism matter

    Science.gov (United States)

    Park, Jiyoung; Kitayama, Shinobu; Karasawa, Mayumi; Curhan, Katherine; Markus, Hazel R; Kawakami, Norito; Miyamoto, Yuri; Love, Gayle D; Coe, Christopher L; Ryff, Carol D

    2012-01-01

    Although it is commonly assumed that social support positively predicts health, the empirical evidence has been inconsistent. We argue that three moderating factors must be considered: (1) support-approving norms (cultural context); (2) support-requiring situations (stressful events); and (3) support-accepting personal style (low neuroticism). Our large-scale cross-cultural survey of Japanese and US adults found significant associations between perceived support and health. The association was more strongly evident among Japanese (from a support-approving cultural context) who reported high life stress (in a support-requiring situation). Moreover, the link between support and health was especially pronounced if these Japanese were low in neuroticism. PMID:22419414

  1. Data development technical support document for the aircraft crash risk analysis methodology (ACRAM) standard

    International Nuclear Information System (INIS)

    Kimura, C.Y.; Glaser, R.E.; Mensing, R.W.; Lin, T.; Haley, T.A.; Barto, A.B.; Stutzke, M.A.

    1996-01-01

    The Aircraft Crash Risk Analysis Methodology (ACRAM) Panel has been formed by the US Department of Energy Office of Defense Programs (DOE/DP) for the purpose of developing a standard methodology for determining the risk from aircraft crashes onto DOE ground facilities. In order to accomplish this goal, the ACRAM panel has been divided into four teams, the data development team, the model evaluation team, the structural analysis team, and the consequence team. Each team, consisting of at least one member of the ACRAM plus additional DOE and DOE contractor personnel, specializes in the development of the methodology assigned to that team. This report documents the work performed by the data development team and provides the technical basis for the data used by the ACRAM Standard for determining the aircraft crash frequency. This report should be used to provide the generic data needed to calculate the aircraft crash frequency into the facility under consideration as part of the process for determining the aircraft crash risk to ground facilities as given by the DOE Standard Aircraft Crash Risk Assessment Methodology (ACRAM). Some broad guidance is presented on how to obtain the needed site-specific and facility specific data but this data is not provided by this document

  2. Technical support for the Ukrainian State Committee for Nuclear Radiation Safety on specific waste issues

    International Nuclear Information System (INIS)

    Little, C.A.

    1995-01-01

    The government of Ukraine, a now-independent former member of the Soviet Union, has asked the United States to assist its State Committee for Nuclear and Radiation Safety (SCNRS) in improving its regulatory control in technical fields for which it has responsibility. The US Nuclear Regulatory Commission (NRC) is providing this assistance in several areas, including management of radioactive waste and spent fuel. Radioactive wastes resulting from nuclear power plant operation, maintenance, and decommissioning must be stored and ultimately disposed of appropriately. In addition, radioactive residue from radioisotopes used in various industrial and medical applications must be managed. The objective of this program is to provide the Ukrainian SCNRS with the information it needs to establish regulatory control over uranium mining and milling activities in the Zheltye Vody (Yellow Waters) area and radioactive waste disposal in the Pripyat (Chernobyl) area among others. The author of this report, head of the Environmental Technology Section, Health Sciences Research Division of Oak Ridge National Laboratory, accompanied NRC staff to Ukraine to meet with SCNRS staff and visit sites in question. The report highlights problems at the sites visited and recommends license conditions that SCNRS can require to enhance safety of handling mining and milling wastes. The author's responsibility was specifically for the visit to Zheltye Vody and the mining and milling waste sites associated with that facility. An itinerary for the Zheltye Vody portion of the trip is included as Appendix A

  3. National Institute of Radiological Sciences. 2. Department of technical support and development

    International Nuclear Information System (INIS)

    Yukawa, Masae

    2005-01-01

    The Department has two Sections of Technical Service and Development, and of Laboratory Animal Development and Management, of which works are described in this paper. The former section works for planning and coordination, maintenance, management and operation of collaborative experimental facilities and equipments; maintenance, management and operation of radiation generating equipments involving accelerators; and maintenance, management and operation of specified experimental equipments (Radon Building). The recent topic is the introduction of a neutron accelerator system for biological effect experiment, neutron exposure accelerator system for biological effect experiment (NASBEE), and of a single particle irradiation system to cell, single particle irradiation system to cell (SPICE), the equipment for micro-beam (2 μm accuracy) for cell irradiation. The latter section works for production, maintenance and supply of experimental animals; maintenance, management and operation of facilities for experimental animals and plants; hygienic management of experimental animals; and research, development and application of new technology concerning experimental animals. The recent topic is the construction of buildings providing areas for SPF mice and rats in order to study the low dose radiation effect and for monkeys, to study the molecular imaging. The intellectual fundamentals of the Department are to be open to the public and be used collaboratively in principle. (S.I.)

  4. CO2 removal from biogas with supported amine sorbents : First technical evaluation based on experimental data

    NARCIS (Netherlands)

    Sutanto, Stevia; Dijkstra, J. W.; Pieterse, J. A.Z.; Boon, J; Hauwert, P.; Brilman, D. W.F.

    2017-01-01

    Biogas from fermentation of manure and organic residues produces a gas stream that can be fed into the natural gas grid, provided impurities (CO2, H2S and H2O) are removed according to specifications prior to grid injection. Compared to conventional technologies, supported amine sorbents (SAS) seem

  5. Yucca Mountain Project: A summary of technical support activities, January 1987--June 1988

    International Nuclear Information System (INIS)

    1989-05-01

    The activities in the Geochemistry and Mineralogy section of our program support three independent and interrelated subject areas which are: Geochemical retardation/transport of radionuclides to the accessible environment, site-specific mineralogy and geophysical studies to establish the hydrogeology of the vadose zone, and past climate and related genesis of authigenic desert carbonates and silicates

  6. The INR program in 2000-2005 period for developing the national technical support of the nuclear power

    International Nuclear Information System (INIS)

    Gheorghiu, C.

    2001-01-01

    The INR - Pitesti is largely implied in implementing the tasks of high complexity stipulated by the Emergency Directive of the Romanian Government No. 144/30.09.1999 meant to ensure the national technical support for the nuclear power field as well as the development of presupposed international cooperation. The Strategic Program of the Autonomous Authority for Nuclear Activities (RAAN) stipulates the main activities to be carried-out in the period 2000-2005 and beyond, in the frame of 18 specific programs. These programs approaches high priority world wide issues targeting major objectives like efficient operation of NPPs ensuring the design service life, creating conditions for extension of operation duration increasing the safety standard of personnel, of population as well as reducing the impact of nuclear power upon the environmental. Also, the program approaches functionally the problem of safety management of the radioactive waste resulting from nuclear facility operation. Achieving these major objective as well as of those specific laid down in the Strategic Program requires continual supply with material and human resources, refurbishment of material background of INR in its research and development activities as well as a consistent integration of the INR staff of researchers within the international scientific community. Implementing the annual programs included in the Strategic Program will ensure also fulfilment of the international arrangements of our country as well as the realization of the agreements concluded by the Ministry of Industry and Resources and RAAN with analogous authorities from abroad (AECL - Canada, DOE - USA, etc.). This document has the following content: 1. Legislative support and the mission of the program; 2. Program's strategic objectives; 3. General technical objectives of the programs. 4. Financing; 5. Providing and training human resources; 6. Investments for research and development; 7. International cooperation; 8

  7. Introducing the Brazilian program of technical support to the International Atomic Energy Agency - Department of Safeguards

    International Nuclear Information System (INIS)

    Vinhas, Laercio A.; Palhares, Lilia C.; Dias, Fabio C.; Khlebnikov, Nikolai

    2009-01-01

    As an active Member State of the International Atomic Energy Agency (IAEA), Brazil has applied substantial resources in order to maintain the best possible cooperation with the Agency, aiming at a continuous improvement of the effectiveness and efficiency of the safeguards system. Over the last decades a number of projects, involving the participation of high-level Brazilian professionals in the nuclear area, have already been jointly completed. To continue providing this voluntary support to the IAEA Department of Safeguards for research, development and implementation, in 2006 Brazil decided to accept the IAEA's invitation to participate in the IAEA Member States Support Programmes initiative, which currently includes 21 Member States. The Research and Development (R and D) Programme for Nuclear Verification is the IAEA reference in this regard, establishing the high priority needs and describing each recognized departmental project. The Programme is issued every two years. The 'Brazilian Support Programme (BRZ SP)' was established on the basis of a set of administrative procedures titled 'Cooperation Arrangements and Guidelines', agreed between the Brazilian National Nuclear Energy Commission (CNEN) and the IAEA - Department of Safeguards. The scope of the BRZ SP includes: the participation in field tests and the evaluation of state-of-the-art technologies as requested by the IAEA for its safeguards applications; the training of safeguards personnel involved with safeguards implementation at both facility and State levels; laboratorial support in the area of destructive and nondestructive analysis of nuclear materials; the analysis of safeguards issues; information acquisition, analysis and evaluation; and the provision of human resources, such as experts and consultants to work directly with the IAEA Secretariat. The activities agreed under the BRZ SP are not restricted to CNEN staff members. Professionals from other Brazilian organizations may also be involved

  8. ANL technical support program for DOE Environmental Restoration and Waste Management

    International Nuclear Information System (INIS)

    Bates, J.K.; Bradley, C.R.; Buck, E.C.; Cunnane, J.C.; Dietz, N.L.; Ebert, W.L.; Emery, J.W.; Feng, X.; Gerding, T.J.; Gong, M.; Hoh, J.C.; Mazer, J.J.; Wronkiewicz, D.J.; Bourcier, W.L.; Morgan, L.E.; Newton, L.; Nielsen, J.K.; Phillips, B.L.; Ewing, R.C.; Wang, L.; Li, H.; Tomozawa, M.

    1993-05-01

    A program was established for DOE Environmental Restoration and Waste Management (EM) to evaluate factors that are anticipated to affect waste glass reaction during repository disposal, especially in an unsaturated environment typical of what may be expected for the proposed Yucca Mountain repository site. This report covers progress in FY 1992 on the following tasks: 1. A compendium of the characteristics of high-level nuclear waste borosilicate glass has been written. 2. A critical review of important parameters that affect the reactivity of glass in an unsaturated environment is being prepared. 3. A series of tests has been started to evaluate the reactivity of fully radioactive glasses in a high-level waste repository environment and compare it to the reactivity of synthetic, nonradioactive glasses of similar composition. 4. The effect of radiation upon the durability of waste glasses at a high glass surface area-to-liquid volume (SA/V) ratio and a high gas-to-liquid volume ratio will be assessed. These tests address both vapor and high SA/V liquid conditions. 5. A series of tests is being performed to compare the extent of reaction of nuclear waste glasses at various SAN ratios. Such differences in the SAN ratio may significantly affect glass durability. 6. A series of natural analogue tests is being analyzed to demonstrate a meaningful relationship between experimental and natural alteration conditions. 7. Analytical electron microscopy (AEM), infrared spectroscopys and nuclear resonant profiling are being used to assess the glass/water reaction pathway by identifying intermediate phases that appear on the reacting glass. Additionally, colloids from the leach solutions are being studied using AEM. 8. A technical review of AEM results is being provided. 9. A study of water diffusion involving nuclear waste glasses is being performed. 10. A mechanistically based model is being developed to predict the performance of glass over repository-relevant time periods

  9. DoD Physical Security Technical Support at the 1980 Winter Olympics Village.

    Science.gov (United States)

    1980-09-02

    support were provided to the 1980 Winter Olympic Games were: (1) Physical Security, (2) Communications- Electronics , and (3) Medical via the New York Army...vibration-based Fence Pro- tection System (FPS), manufactured by General Telephone and Electronics (GT& E ) and installed for the Federal Bureau of Prisons...CM (Mr. Woomert) DRSXY-GB (Mr. R. E . Cam) Aberdeen Proving Ground, MD 21005 Commander US Army Communications and Electronics Material Readiness

  10. Life support systems analysis and technical trades for a lunar outpost

    Science.gov (United States)

    Ferrall, J. F.; Ganapathi, G. B.; Rohatgi, N. K.; Seshan, P. K.

    1994-01-01

    The NASA/JPL life support systems analysis (LISSA) software tool was used to perform life support system analysis and technology trades for a Lunar Outpost. The life support system was modeled using a chemical process simulation program on a steady-state, one-person, daily basis. Inputs to the LiSSA model include metabolic balance load data, hygiene load data, technology selection, process operational assumptions and mission parameter assumptions. A baseline set of technologies has been used against which comparisons have been made by running twenty-two cases with technology substitutions. System, subsystem, and technology weights and powers are compared for a crew of 4 and missions of 90 and 600 days. By assigning a weight value to power, equivalent system weights are compared. Several less-developed technologies show potential advantages over the baseline. Solid waste treatment technologies show weight and power disadvantages but one could have benefits associated with the reduction of hazardous wastes and very long missions. Technology development towards reducing the weight of resupplies and lighter materials of construction was recommended. It was also recommended that as technologies are funded for development, contractors should be required to generate and report data useful for quantitative technology comparisons.

  11. Role of the team of scientific and technical commissioning support (TSTCS) during Mochovce NPP unit 3 and 4 commissioning

    International Nuclear Information System (INIS)

    Hermansky, J.; Prachar, M.; Sedlacek, M.; Petenyi, V.

    2011-01-01

    The Team of Scientific and Technical Commissioning Support (TSTCS) shall provide an independent support for the Mochovce NPP 3 and 4 Commissioning Department during Mochovce Units 3 and 4 commissioning. This independent support will be in line with the Mochovce NPP 3 and 4 Directive 'Non-active tests and commissioning' and it will be carried out in form of professional and expert works focusing on supervision of fulfilment of requirements for nuclear safety observance. The TSTCS duty to provide for such services during NPP commissioning is specified by Slovak Regulatory Body legislation. The independent TSTCS will supervise; - fulfilment of requirements for nuclear safety during preparation and implementation of commissioning tests; -scientific and technical level of commissioning programmes, and reflection on nuclear safety requirements in commissioning programmes,- commissioning process and test results. Main standpoints of the Team activities for individual unit commissioning stages will be; - assesment of the selected programs of functional tests in installations having an impact on nuclear safety and evaluation of the results of these tests; - assesment of the programs of physics and power commissioning, - assesment of the unit preparedness before fuel loading start; - assesment of the unit preparedness for performing initial criticality and low power commissioning and power commissioning stages; - evaluation of the results of physics and power commissioning stages and sub-stages; - final evaluation of the results from implementing the physics and power commissioning stages. The paper also presents a short description of the Team scope activities, the Team organisation, and a procedure for issuing of standpoints to individual unit commissioning stages. (Authors)

  12. International conference on challenges faced by technical and scientific support organizations in enhancing nuclear safety. Contributed papers and presentations

    International Nuclear Information System (INIS)

    2007-01-01

    Over the past two decades, the IAEA has conducted a series of major conferences that have addressed topical issues and strategies critical to nuclear safety for consideration by the world's nuclear regulators. More recently, the IAEA organized the International Conference on Effective Nuclear Regulatory Systems - Facing Safety and Security Challenges, held in Moscow in 2006. The Moscow conference was the first of its kind, because it brought together senior regulators of nuclear safety, radiation safety and security from around the world to discuss how to improve regulatory effectiveness with the objective of improving the protection of the public and the users of nuclear and radioactive material. The International Conference on Challenges Faced by Technical and Scientific Support Organizations in Enhancing Nuclear Safety was held in Aix-en-Provence, France, from 23 to 27 April 2007. This conference, again, was the first of its kind, because it was the first to address technical and scientific support organizations (TSOs), the role they play in supporting either the national regulatory bodies or the industry in making optimum safety decisions and the challenges they face in providing this support. This conference provided a forum for the TSOs to discuss these and other issues with the organizations to which they provide this support - that is, the regulators and the operators/industry - as well as with other stakeholders such as research organizations and public authorities. This conference can also be considered to have a link to the Moscow conference. The Moscow conference concluded that effective regulation of nuclear safety is vital for the safe use of nuclear energy and associated technologies, both now and in the future, and is an essential prerequisite for establishing an effective Global Nuclear Safety Regime. The Moscow conference also highlighted the importance of continued and improved international cooperation in the area of nuclear safety. These

  13. Solid Matter

    CERN Document Server

    Angelo, Joseph A

    2011-01-01

    Supported by a generous quantity of full-color illustrations and interesting sidebars, Solid Matter introduces the basic characteristics and properties of solid matter. It briefly describes the cosmic connection of the elements, leading readers through several key events in human pre-history that resulted in more advanced uses of matter in the solid state. Chapters include:. -Solid Matter: An Initial Perspective. -Physical Behavior of Matter. -The Gravity of Matter. -Fundamentals of Materials Science. -Rocks and Minerals. -Metals. -Building Materials. -Carbon Earth's Most Versatile Element. -S

  14. Laboratory Calibration Studies in Support of ORGANICS on the International Space Station: Evolution of Organic Matter in Space

    Science.gov (United States)

    Ruiterkamp, R.; Ehrenfreund, P.; Halasinski, T.; Salama, F.; Foing, B.; Schmidt, W.

    2002-01-01

    This paper describes the scientific overview and current status of ORGANICS an exposure experiment performed on the International Space Station (ISS) to study the evolution of organic matter in space (PI: P. Ehrenfreund), with supporting laboratory experiments performed at NASA Ames. ORGANICS investigates the chemical evolution of samples submitted to long-duration exposure to space environment in near-Earth orbit. This experiment will provide information on the nature, evolution, and survival of carbon species in the interstellar medium (ISM) and in solar system targets.

  15. White Matter Tracts Connected to the Medial Temporal Lobe Support the Development of Mnemonic Control.

    Science.gov (United States)

    Wendelken, Carter; Lee, Joshua K; Pospisil, Jacqueline; Sastre, Marcos; Ross, Julia M; Bunge, Silvia A; Ghetti, Simona

    2015-09-01

    One of the most important factors driving the development of memory during childhood is mnemonic control, or the capacity to initiate and maintain the processes that guide encoding and retrieval operations. The ability to selectively attend to and encode relevant stimuli is a particularly useful form of mnemonic control, and is one that undergoes marked improvement over childhood. We hypothesized that structural integrity of white matter tracts, in particular those connecting medial temporal lobe memory regions to other cortical areas, and/or those connecting frontal and parietal control regions, should contribute to successful mnemonic control. To test this hypothesis, we examined the relationship between structural integrity of selected white matter tracts and an experimental measure of mnemonic control, involving enhancement of memory by attention at encoding, in 116 children aged 7-11 and 25 young adults. We observed a positive relationship between integrity of uncinate fasciculus and mnemonic enhancement across age groups. In adults, but not in children, we also observed an association between mnemonic enhancement and integrity of ventral cingulum bundle and ventral fornix/fimbria. Integrity of fronto-parietal tracts, including dorsal cingulum and superior longitudinal fasciculus, was unrelated to mnemonic enhancement. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  16. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 22. Nuclear considerations for repository design

    International Nuclear Information System (INIS)

    1978-04-01

    This volume, Y/OWI/TM-36/22, ''Nuclear Considerations for Repository Design,'' is one of a 23-volume series, ''Technical Support for GEIS: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-36, which supplements the ''Contribution to Draft Generic Environmental Impact Statement on Commercial Waste Management: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-44. The series provides a more complete technical basis for the preconceptual designs, resource requirements, and environmental source terms associated with isolating commercial LWR wastes in underground repositories in salt, granite, shale and basalt. Wastes are considered from three fuel cycles: uranium and plutonium recycling, no recycling of spent fuel and uranium-only recycling. Included in this volume are baseline design considerations such as characteristics of canisters, drums, casks, overpacks, and shipping containers; maximum allowable and actual decay-heat levels; and canister radiation levels. Other topics include safeguard and protection considerations; occupational radiation exposure including ALARA programs; shielding of canisters, transporters and forklift trucks; monitoring considerations; mine water treatment; canister integrity; and criticality calculations

  17. Participation in Training for Depression Care Quality Improvement: A Randomized Trial of Community Engagement or Technical Support.

    Science.gov (United States)

    Chung, Bowen; Ngo, Victoria K; Ong, Michael K; Pulido, Esmeralda; Jones, Felica; Gilmore, James; Stoker-Mtume, Norma; Johnson, Megan; Tang, Lingqi; Wells, Kenneth Brooks; Sherbourne, Cathy; Miranda, Jeanne

    2015-08-01

    Community engagement and planning (CEP) could improve dissemination of depression care quality improvement in underresourced communities, but whether its effects on provider training participation differ from those of standard technical assistance, or resources for services (RS), is unknown. This study compared program- and staff-level participation in depression care quality improvement training among programs enrolled in CEP, which trained networks of health care and social-community agencies jointly, and RS, which provided technical support to individual programs. Matched programs from health care and social-community service sectors in two communities were randomly assigned to RS or CEP. Data were from 1,622 eligible staff members from 95 enrolled programs. Primary outcomes were any staff trained (for programs) and total hours of training (for staff). Secondary staff-level outcomes were hours of training in specific depression collaborative care components. CEP programs were more likely than RS programs to participate in any training (p=.006). Within health care sectors, CEP programs were more likely than RS programs to participate in training (p=.016), but within social-community sectors, there was no difference in training by intervention. Among staff who participated in training, mean training hours were greater among CEP programs versus RS programs for any type of training (ptraining related to each component of depression care (p<.001) except medication management. CEP may be an effective strategy to promote staff participation in depression care improvement efforts in underresourced communities.

  18. Continuing professional development: researching non-technical competencies can support cognitive reappraisal and reduced stress in clinicians.

    Science.gov (United States)

    Kinnison, Tierney; May, Stephen

    2017-09-09

    Generic professional capabilities (non-technical competencies) are increasingly valued for their links to patient outcomes and clinician well-being. This study explores the emotional change, and practice-related outcomes, of participants of a veterinary professional key skills (PKS) continuing professional development (CPD) module. Reflective summaries produced by participants were analysed. A change in emotion, from 'negative' to 'positive', was the focus of analysis. Sections regarding these emotions were thematically analysed. Analysis was performed on 46 summaries. Three themes were identified: 'the PKS module' (centred on reluctance becoming surprise and stimulation), 'developing non-technical competencies' (unease to confidence) and 'stress and coping through a reflective focus' (anxiety to harmony). The changing emotions were connected to positive cognitive reappraisal and often behaviour changes, benefitting self, practice, clients and patients. The PKS module teaches participants to reflect; a new and challenging concept. The consequences of this enabled participants to understand the importance of professional topics, to be appreciative as well as critical, and to enjoy their job. Importantly, the module stimulated coping responses. Better understanding of roles led to participants having more reasonable expectations of themselves, more appreciation of their work and reduced stress. This research supports more attention to professional skills CPD for health professions. © British Veterinary Association (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  19. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 5. Baseline rock properties-granite

    International Nuclear Information System (INIS)

    1978-04-01

    This volume, Y/OWI/TM-36/5, Baseline Rock Properties--Granite, is one of a 23-volume series, ''Technical Support for GEIS: Radioactive Waste Isolation in Geologic Formations, Y/OWI/TM-36'' which supplements a ''Contribution to Draft Generic Environmental Impact Statement on Commercial Waste Management: Radioactive Waste Isolation in Geologic Formations, Y/OWI/TM-44.'' The series provides a more complete technical basis for the preconceptual designs, resource requirements, and environmental source terms associated with isolating commercial LWR wastes in underground repositories in salt, granite, shale and basalt. Wastes are considered from three fuel cycles: uranium and plutonium recycling, no recycling of spent fuel and uranium-only recycling. This report, on the rock properties of typical granites, includes an evaluation of the various test results reported in the literature. Firstly, a literature survey was made in order to obtain a feel for the range of rock properties encountered. Then, granites representative of different geologic ages and from different parts of the United States were selected and studied in further detail. Some of the special characteristics of granite, such as anisotropy, creep and weathering were also investigated. Lastly, intact properties for a typical granite were selected and rock mass properties were derived using appropriate correction factors

  20. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 7. Baseline rock properties-basalt

    International Nuclear Information System (INIS)

    1978-04-01

    This volume, Y/OWI/TM-36/7 Baseline Rock Properties--Basalt, is one of a 23-volume series, ''Technical Support for GEIS: Radioactive Waste Isolation in Geologic Formations, Y/OWI/TM-36'' which supplements a ''Contribution to Draft Generic Environmental Impact Statement on Commercial Waste Management: Radioactive Waste Isolation in Geologic Formations, Y/OWI/TM-44.'' The series provides a more complete technical basis for the preconceptual designs, resource requirements, and environmental source terms associated with isolating commercial LWR wastes in underground repositories in salt, granite, shale and basalt. Wastes are considered from three fuel cycles: uranium and plutonium recycling, no recycling of spent fuel and uranium-only recycling. This report contains an evaluation of the results of a literature survey to define the rock mass properties of a generic basalt, which could be considered as a geological medium for storing radioactive waste. The general formation and structure of basaltic rocks is described. This is followed by specific descriptions and rock property data for the Dresser Basalt, the Amchitka Island Basalt, the Nevada Test Site Basalt and the Columbia River Group Basalt. Engineering judgment has been used to derive the rock mass properties of a typical basalt from the relevant intact rock property data and the geological information pertaining to structural defects, such as joints and faults

  1. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 21. Ground water movement and nuclide transport

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-04-01

    This volume, TM-36/21 Ground Water Movement and Nuclide Transport, is one of a 23-volume series, ''Technical Support for GEIS: Radioactive Waste Isolation in Geologic Formations, Y/OWI/TM-36'' which supplements a ''Contribution to Draft Generic Environmental Impact Statement on Commercial Waste Management: Radioactive Waste Isolation in Geologic Formations, Y/OWI/TM-44.'' The series provides a more complete technical basis for the preconceptual designs, resource requirements, and environmental source terms associated with isolating commercial LWR wastes in underground repositories in salt, granite, shale and basalt. Wastes are considered from three fuel cycles: uranium and plutonium recycling of spent fuel and uranium-only recycling. The studies presented in this volume consider the effect of the construction of the repository and the consequent heat generation on the ground water movement. Additionally, the source concentrations and leach rates of selected radionuclides were studied in relation to the estimated ground water inflow rates. Studies were also performed to evaluate the long term migration of radionuclides as affected by the ground water flow. In all these studies, three geologic environments are considered; granite, shale and basalt.

  2. RADIO-TECHNICAL FLIGHT SUPPORT MILITARY AND CIVIL AVIATION – THE STRATEGIC PROBLEM OF RUSSIA ARCTIC ZONE

    Directory of Open Access Journals (Sweden)

    N. I. Didenko

    2017-01-01

    Full Text Available It should be noted that a number of countries consider that the Arctic is the property of all mankind and therefore the legal regime of the usage of this region territory is necessary to be reconsidered. The intensification of the armed forces activities on the northern borders is caused by aggravated international disagreements on the issues of territorial influence in this region, by the need to ensure the safety of increasing freight traffic through the Northern Sea Route and also by an increase in production capacities of domestic extractive enterprises on the shelf. The article deals with the challenge of the accelerated development in the Arctic region of Russia. It is noted that the major role in the solution of this problem belongs to an air-transport complex which is almost the only means to provide the operational availability to objects in the region. For the effective usage of the air-transport complex the approach based on the concept of radio-technical flight support, founded on the technologies of global navigation satellite systems and automatic dependent observation is offered. The existence of readymade technical solutions for these technologies implementation allows to accelerate the solvation of social and economic development problems of the Arctic region in general, alongside with the problems of national security of Russia.

  3. The effect of support on Internet-delivered treatment for insomnia: Does baseline depression severity matter?

    NARCIS (Netherlands)

    Lancee, J.; Sorbi, M.J.; Eisma, M.C.; van Straten, A.; van den Bout, J.

    2014-01-01

    Internet-delivered cognitive-behavioral treatment is effective for insomnia. However, little is known about the beneficial effects of support. Recently we demonstrated that motivational support moderately improved the effects of Internet-delivered treatment for insomnia. In the present study, we

  4. Technical comments on EPA`s proposed revisions to the National Ambient Air Quality Standard for particulate matter

    Energy Technology Data Exchange (ETDEWEB)

    Lipfert, F.W.

    1997-03-01

    The US Environmental Protection Agency (EPA) has proposed new ambient air quality standards specifically for fine particulate matter, regulating concentrations of particles with median aerodynamic diameters less than 2.5 {mu}m (PM{sub 2.5}). Two new standards have been proposed: a maximum 24-hr concentration that is intended to protect against acute health effects, and an annual concentration limit that is intended to protect against longer-term health effects. EPA has also proposed a slight relaxation of the 24-hr standard for inhalable particles (PM{sub 10}), by allowing additional exceedances each year. Fine particles are currently being indirectly controlled by means of regulations for PM{sub 10} and TSP, under the Clean Air Act of 1970 and subsequent amendments. Although routine monitoring of PM{sub 2.5} is rare and data are sparse, the available data indicate that ambient concentrations have been declining at about 6% per year under existing regulations.

  5. Critical experiments supporting close proximity water storage of power reactor fuel. Technical progress report

    International Nuclear Information System (INIS)

    Baldwin, M.N.; Hoovler, G.S.; Eng, R.L.; Welfare, F.G.

    1979-07-01

    Close-packed storage of LWR fuel assemblies is needed in order to expand the capacity of existing underwater storage pools. This increased capacity is required to accommodate the large volume of spent fuel produced by prolonged onsite storage. To provide benchmark criticality data in support of this effort, 20 critical assemblies were constructed that simulated a variety of close-packed LWR fuel storage configurations. Criticality calculations using the Monte Carlo KENO-IV code were performed to provide an analytical basis for comparison with the experimental data. Each critical configuration is documented in sufficient detail to permit the use of these data in validating calculational methods according to ANSI Standard N16.9-1975

  6. Team Meetings within Clinical Domains - Exploring the Use of Routines and Technical Support for Communication

    Science.gov (United States)

    Groth, Kristina; Lantz, Ann; Sallnäs, Eva-Lotta; Frykholm, Oscar; Green, Anders

    Today, it is common that a team of clinicians, from different disciplines, instead of one single doctor, care for a patient. This is especially true when it concerns more complicated diseases in highly specialised health care. Going from one doctor to a team of doctors raises new dimensions/problems/issues when deciding about the diagnosis and how to treat the patient. Instead of one person deciding, based on the information given from others, a group of people need to agree on a decision. How do the participants during such decision meetings argue for their experience and skill? What kind of technologies are available and how do they support the communication in the meeting? Måseide (2006), for example, focuses on how different forms of evidence influence and regulate the judgements and decisions of medical practitioners during such meetings. Groth et al. (2008), for example, focuses on the technology used during such meetings, with a focus on audio, video, and images.

  7. Lessons Learned from Human Factor Technical Support for Nuclear Power Plants

    International Nuclear Information System (INIS)

    Jung, Yeon Sub; Song, Tae Young

    2011-01-01

    NETEC is on the frontier to support Korean nuclear power plants. Requests of service are distributed through web based system. Human factor requests are occasionally posted. This paper analyzes interesting human factors requests/responses serviced, and summarizes the lesson learned. Subjects of the service include man machine interface, equipment label, procedure writing, procedure adherence, BISI, hand switch and alarm tile. Specifically the man machine interface is related to control command generated by acknowledge button, arrangement of switches. Procedure writing is about how to write contingency actions with proper numbering scheme. BISI is analyzed in view of automation level. Alarm tile is about how to handle the common alarm tile originated from local alarm boards. These topics seem to be legacies of past technology. Even though there are still human engineering discrepancies, these have been less evaluated because the topics need knowledge of other field domains

  8. Launching a nuclear nower programme in a developing country - Technical and Scientific Support Organisations (TSO) in capacity building

    International Nuclear Information System (INIS)

    Ngotho, E.M.

    2010-01-01

    The need for involvement of Technical and Scientific Support Organisations (TSO) in developing countries intending to launch a nuclear power programme (NPP) cannot be overemphasized. In an International Conference on Topical Issues in Nuclear Installation Safety held in 2008, Mumbai, India, I presented a paper entitled 'Launching a Nuclear Power Programme - a third world country's perspective' - IAEA-CN-158/9. I pointed out some real constraints encountered by a developing country while trying to introduce a nuclear power programme. This was inadequate base infrastructure, financial incapability and lack of skilled manpower. Granted there are areas where the role of TSOs is minimal like in carrying the actual cost of infrastructure but their input in areas of technology, evaluation, assessment and skills development cannot be gainsaid. (author)

  9. Great Lakes water quality initiative technical support document for the procedure to determine bioaccumulation factors. Draft report

    International Nuclear Information System (INIS)

    1993-03-01

    The purpose of the document is to provide the technical information and rationale in support of the proposed procedures to determine bioaccumulation factors. Bioaccumulation factors, together with the quantity of aquatic organisms eaten, determine the extent to which people and wildlife are exposed to chemicals through the consumption of aquatic organisms. The more bioaccumulative a pollutant is, the more important the consumption of aquatic organisms becomes as a potential source of contaminants to humans and wildlife. Bioaccumulation factors are needed to determine both human health and wildlife tier I water quality criteria and tier II values. Also, they are used to define Bioaccumulative Chemicals of Concern among the Great Lakes Initiative universe of pollutants. Bioaccumulation factors range from less than one to several million

  10. Technical Support Document: Development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings - 50% Energy Savings

    Energy Technology Data Exchange (ETDEWEB)

    Bonnema, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Leach, Matt [National Renewable Energy Lab. (NREL), Golden, CO (United States); Pless, Shanti [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2013-06-05

    This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-MBBR) ASHRAE et al. (2011b). The AEDG-MBBR is intended to provide recommendations for achieving 50% whole-building energy savings in retail stores over levels achieved by following ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings (Standard 90.1-2004) (ASHRAE 2004b). The AEDG-MBBR was developed in collaboration with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IES), the U.S. Green Building Council (USGBC), and the U.S. Department of Energy.

  11. Technical Support Document: Development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings - 50% Energy Savings

    Energy Technology Data Exchange (ETDEWEB)

    Bonnema, E.; Leach, M.; Pless, S.

    2013-06-01

    This Technical Support Document describes the process and methodology for the development of the Advanced Energy Design Guide for Medium to Big Box Retail Buildings: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-MBBR) ASHRAE et al. (2011b). The AEDG-MBBR is intended to provide recommendations for achieving 50% whole-building energy savings in retail stores over levels achieved by following ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings (Standard 90.1-2004) (ASHRAE 2004b). The AEDG-MBBR was developed in collaboration with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IES), the U.S. Green Building Council (USGBC), and the U.S. Department of Energy.

  12. Technical-Induced Hemolysis in Patients with Respiratory Failure Supported with Veno-Venous ECMO - Prevalence and Risk Factors.

    Science.gov (United States)

    Lehle, Karla; Philipp, Alois; Zeman, Florian; Lunz, Dirk; Lubnow, Matthias; Wendel, Hans-Peter; Göbölös, Laszlo; Schmid, Christof; Müller, Thomas

    2015-01-01

    The aim of the study was to explore the prevalence and risk factors for technical-induced hemolysis in adults supported with veno-venous extracorporeal membrane oxygenation (vvECMO) and to analyze the effect of hemolytic episodes on outcome. This was a retrospective, single-center study that included 318 adult patients (Regensburg ECMO Registry, 2009-2014) with acute respiratory failure treated with different modern miniaturized ECMO systems. Free plasma hemoglobin (fHb) was used as indicator for hemolysis. Throughout a cumulative support duration of 4,142 days on ECMO only 1.7% of the fHb levels were above a critical value of 500 mg/l. A grave rise in fHb indicated pumphead thrombosis (n = 8), while acute oxygenator thrombosis (n = 15) did not affect fHb. Replacement of the pumphead normalized fHb within two days. Neither pump or cannula type nor duration on the first system was associated with hemolysis. Multiple trauma, need for kidney replacement therapy, increased daily red blood cell transfusion requirements, and high blood flow (3.0-4.5 L/min) through small-sized cannulas significantly resulted in augmented blood cell trauma. Survivors were characterized by lower peak levels of fHb [90 (60, 142) mg/l] in comparison to non-survivors [148 (91, 256) mg/l, p≤0.001]. In conclusion, marked hemolysis is not common in vvECMO with modern devices. Clinically obvious hemolysis often is caused by pumphead thrombosis. High flow velocity through small cannulas may also cause technical-induced hemolysis. In patients who developed lung failure due to trauma, fHb was elevated independantly of ECMO. In our cohort, the occurance of hemolysis was associated with increased mortality.

  13. Technical-Induced Hemolysis in Patients with Respiratory Failure Supported with Veno-Venous ECMO - Prevalence and Risk Factors.

    Directory of Open Access Journals (Sweden)

    Karla Lehle

    Full Text Available The aim of the study was to explore the prevalence and risk factors for technical-induced hemolysis in adults supported with veno-venous extracorporeal membrane oxygenation (vvECMO and to analyze the effect of hemolytic episodes on outcome. This was a retrospective, single-center study that included 318 adult patients (Regensburg ECMO Registry, 2009-2014 with acute respiratory failure treated with different modern miniaturized ECMO systems. Free plasma hemoglobin (fHb was used as indicator for hemolysis. Throughout a cumulative support duration of 4,142 days on ECMO only 1.7% of the fHb levels were above a critical value of 500 mg/l. A grave rise in fHb indicated pumphead thrombosis (n = 8, while acute oxygenator thrombosis (n = 15 did not affect fHb. Replacement of the pumphead normalized fHb within two days. Neither pump or cannula type nor duration on the first system was associated with hemolysis. Multiple trauma, need for kidney replacement therapy, increased daily red blood cell transfusion requirements, and high blood flow (3.0-4.5 L/min through small-sized cannulas significantly resulted in augmented blood cell trauma. Survivors were characterized by lower peak levels of fHb [90 (60, 142 mg/l] in comparison to non-survivors [148 (91, 256 mg/l, p≤0.001]. In conclusion, marked hemolysis is not common in vvECMO with modern devices. Clinically obvious hemolysis often is caused by pumphead thrombosis. High flow velocity through small cannulas may also cause technical-induced hemolysis. In patients who developed lung failure due to trauma, fHb was elevated independantly of ECMO. In our cohort, the occurance of hemolysis was associated with increased mortality.

  14. Licensing of safety critical software for nuclear reactors. Common position of seven European nuclear regulators and authorised technical support organisations

    Energy Technology Data Exchange (ETDEWEB)

    2010-07-01

    It is widely accepted that the assessment of software cannot be limited to verification and testing of the end product, i.e. the computer code. Other factors such as the quality of the processes and methods for specifying, designing and coding have an important impact on the implementation. Existing standards provide limited guidance on the regulatory and safety assessment of these factors. An undesirable consequence of this situation is that the licensing approaches taken by nuclear safety authorities and by technical support organisations are determined independently with only limited informal technical co-ordination and information exchange. It is notable that several software implementations of nuclear safety systems have been marred by costly delays caused by difficulties in co-ordinating the development and qualification process. It was thus felt necessary to compare the respective licensing approaches, to identify where a consensus already exists, and to see how greater consistency and more mutual acceptance could be introduced into current practices. This report is the result of the work of a group of regulator and safety authorities' experts. The 2007 version was completed at the invitation of the Western European Nuclear Regulators' Association (WENRA). The major result of the work is the identification of consensus and common technical positions on a set of important licensing issues raised by the design and operation of computer based systems used in nuclear power plants for the implementation of safety functions. The purpose is to introduce greater consistency and more mutual acceptance into current practices. To achieve these common positions, detailed consideration was paid to the licensing approaches followed in the different countries represented by the experts of the task force. The report is intended to be useful: - to coordinate regulators' and safety experts' technical viewpoints in the design of regulators' national

  15. Licensing of safety critical software for nuclear reactors. Common position of seven European nuclear regulators and authorised technical support organisations

    International Nuclear Information System (INIS)

    2010-01-01

    It is widely accepted that the assessment of software cannot be limited to verification and testing of the end product, i.e. the computer code. Other factors such as the quality of the processes and methods for specifying, designing and coding have an important impact on the implementation. Existing standards provide limited guidance on the regulatory and safety assessment of these factors. An undesirable consequence of this situation is that the licensing approaches taken by nuclear safety authorities and by technical support organisations are determined independently with only limited informal technical co-ordination and information exchange. It is notable that several software implementations of nuclear safety systems have been marred by costly delays caused by difficulties in co-ordinating the development and qualification process. It was thus felt necessary to compare the respective licensing approaches, to identify where a consensus already exists, and to see how greater consistency and more mutual acceptance could be introduced into current practices. This report is the result of the work of a group of regulator and safety authorities' experts. The 2007 version was completed at the invitation of the Western European Nuclear Regulators' Association (WENRA). The major result of the work is the identification of consensus and common technical positions on a set of important licensing issues raised by the design and operation of computer based systems used in nuclear power plants for the implementation of safety functions. The purpose is to introduce greater consistency and more mutual acceptance into current practices. To achieve these common positions, detailed consideration was paid to the licensing approaches followed in the different countries represented by the experts of the task force. The report is intended to be useful: - to coordinate regulators' and safety experts' technical viewpoints in the design of regulators' national policies and in revisions

  16. GPHS-RTGs in support of the Cassini RTG Program. Semi annual technical progress report, September 26, 1994--April 2, 1995

    International Nuclear Information System (INIS)

    1995-01-01

    The technical progress achieved during the period 26 September 1994 through 2 April 1995 on Contract DE-AC03-91SF18852 Radioisotope Thermoelectric Generators and Ancillary Activities is described herein. Monthly technical activity for the period 27 February 1995 through 2 April 1995 is included in this progress report. The report addresses tasks, including: spacecraft integration and liaison; engineering support; safety; qualified unicouple production; ETG Fabrication, assembly, and test; ground support equipment; RTG shipping and launch support; designs, reviews, and mission applications; project management, quality assurance, reliability, contract changes, CAGO acquisition (operating funds), and CAGO maintenance and repair; and CAGO acquisition (capital funds)

  17. Technical support to the Solvent Refined Coal (SRC) demonstration projects: assessment of current research and development

    Energy Technology Data Exchange (ETDEWEB)

    Edwards, M.S.; Rodgers, B.R.; Brown, C.H.; Carlson, P.K.; Gambill, W.R.; Gilliam, T.M.; Holmes, J.M.; Krishnan, R.P.; Parsly, L.F.

    1980-12-01

    A program to demonstrate Solvent Refined Coal (SRC) technology has been initiated by the US Department of Energy (DOE) in partnership with two industrial groups. Project management responsibility has been assigned to the Oak Ridge Operations Office (ORO) of DOE. ORO requested that the Oak Ridge National Laboratory assess current research and development (R and D) activities and develop recommendations for those activities that might contribute to successful completion of the SRC demonstration plant projects. The objectives of this final report are to discuss in detail the problem areas in SRC; to discuss the current and planned R and D investigations relevant to the problems identified; and to suggest appropriate R and D activities in support of designs for the SRC demonstration plants. Four types of R and D activities are suggested: continuation of present and planned activities; coordination of activities and results, present and proposed; extension/redirection of activities not involving major equipment purchase or modifications; and new activities. Important examples of the first type of activity include continuation of fired heater, slurry rheology, and slurry mixing studies at Ft. Lewis. Among the second type of activity, coordination of data acquisition and interpretation is recommended in the areas of heat transfer, vapor/liquid equilibria, and physical properties. Principal examples of recommendations for extension/redirection include screening studies at laboratory scale on the use of carbonaceous precoat (e.g., anthracite) infiltration, and 15- to 30-day continuous tests of the Texaco gasifier at the Texaco Montebello facility (using SRC residues).

  18. Information system as technical support for the management of nuclear emergencies

    International Nuclear Information System (INIS)

    Di Marco, G.; Masone, M.; Ursino, S.

    1995-01-01

    Following the Chernobyl accident that affected large European areas, many countries have improved their organizations for the management of radiological emergencies, in order to make them suitable to face situations with a large territorial impact in terms of contamination. In case of accidents with a deep radiological impact, the national competent authority has the role to make decisions about countermeasures to be adopted in order to minimize the consequences of the contamination to population and to the environment. Such countermeasures get adopted on the basis of measured contamination as well as on the basis of the forecast evolution of the radioactive plume. In order to accomplish this role, it is necessary to have, in real time, the availability of all the relevant information required to assess and to continuously update the accident scenario as well as the possibility to perform forecasts about the evolution of the situation. To this purpose ANPA Emergency Centre has designed and implemented an Information System in Support to Nuclear Emergencies Management (SISGEN) which is rapid and reliable in the acquisition and elaboration of huge quantities of data. This paper presents data elaborated by the information system as well as objectives, functions and architecture of the system

  19. Final Technical Report: Supporting Wind Turbine Research and Testing - Gearbox Durability Study

    Energy Technology Data Exchange (ETDEWEB)

    Matthew Malkin

    2012-04-30

    The combination of premature failure of wind turbine gearboxes and the downtime caused by those failures leads to an increase in the cost of electricity produced by the wind. There is a need for guidance to asset managers regarding how to maximize the longevity of their gearboxes in order to help keep the cost of wind energy as low as possible. A low cost of energy supports the US Department of Energy's goal of achieving 20% of the electricity in the United States produced by wind by the year 2030. DNV KEMA has leveraged our unique position in the industry as an independent third party engineering organization to study the problem of gearbox health management and develop guidance to project operators. This report describes the study. The study was conducted in four tasks. In Task 1, data that may be related to gearbox health and are normally available to wind project operators were collected for analysis. Task 2 took a more in-depth look at a small number of gearboxes to gain insight in to relevant failure modes. Task 3 brought together the previous tasks by evaluating the available data in an effort to identify data that could provide early indications of impending gearbox failure. Last, the observations from the work were collected to develop recommendations regarding gearbox health management.

  20. Technical support document for the regional sustainable development strategy for the Athabasca Oil Sands Area

    International Nuclear Information System (INIS)

    1999-07-01

    The Regional Sustainable Development Strategy (RSDS) builds on the current environmental and resource management system in Alberta, and it features a framework for: providing support for continued economic development in the region that addresses environmental needs and resource sustainability; creating an enhanced management framework that will adapt to the changing needs of the area which will guide government environmental and resource managers; developing a strong foundation of environmental information and science to assist in making decisions on sustainable resource and environmental management in the region; and creating a way to identify priority regional environmental issues and to organize the science and monitoring work needed to comprehend those issues. Blueprints for action were identified to attack issues within three group categories. The first category, which is based on information gaps and urgency, includes sustainable ecosystems, cumulative impacts on wildlife, soil and plant species diversity, effects of air emissions on human health, wildlife and vegetation, and bioaccumulation of heavy metals. The second category, which is based on information gaps and work underway, includes access management, cumulative impacts on fish habitat and populations, effects of tailings ponds emissions, effects of acid deposition on sensitive receptors, and impacts on surface water quality. The third category, which is based on information gaps, work underway and lower level of urgency, includes end pit lake water quality, impacts on surface water quantity, and impacts on groundwater quantity and quality

  1. Does Government Support for Private Innovation Matter? Firm-Level Evidence from Turkey and Poland

    OpenAIRE

    Wojciech Grabowski; Teoman Pamukcu; Krzysztof Szczygielski; Sinan Tandogan

    2013-01-01

    The aim of the project is to analyze government support for innovation in a comparative perspective by first examining the main existing instruments of financial support for innovation in Turkey and Poland, and secondly to assess their effectiveness by applying recent econometric techniques to firm-level data for both countries obtained from the Community Innovation Survey (CIS). Comparing Turkey to Poland is both meaningful and promising from a policy-analysis point of view. Both countries a...

  2. Trauma, social support, family conflict, and chronic pain in recent service veterans: does gender matter?

    Science.gov (United States)

    Driscoll, Mary A; Higgins, Diana M; Seng, Elizabeth K; Buta, Eugenia; Goulet, Joseph L; Heapy, Alicia A; Kerns, Robert D; Brandt, Cynthia A; Haskell, Sally G

    2015-06-01

    Women veterans have a higher prevalence of chronic pain relative to men. One hypothesis is that differential combat and traumatic sexual experiences and attenuated levels of social support between men and women may differentially contribute to the development and perpetuation of pain. This investigation examined [1] gender differences in trauma, social support, and family conflict among veterans with chronic pain, and [2] whether trauma, social support, and family conflict were differentially associated with pain severity, pain interference, and depressive symptom severity as a function of gender. Participants included 460 veterans (56% female) who served in support of recent conflicts, and who endorsed pain lasting 3 months or longer. Participants completed a baseline survey during participation in a longitudinal investigation. Self-report measures included pain severity, pain interference, depressive symptom severity, exposure to traumatic life events, emotional and tangible support, and family conflict. Relative to men, women veterans reporting chronic pain evidenced higher rates of childhood interpersonal trauma (51% vs 34%; P military sexual trauma (54% vs 3%; P trauma, and family conflict with pain interference. It also moderated family conflict in the prediction of depressive symptoms. Results underscore the potential importance of developing and testing gender specific models of chronic pain that consider the relative roles of trauma, social support, and family conflict. Wiley Periodicals, Inc.

  3. Kennedy Space Center (KSC) Pad B Catenary Capability Analysis and Technical Exchange Meeting (TEM) Support

    Science.gov (United States)

    Wilson, Timmy R.; Kichak, Robert; Rakov, Vladimir; Kithil, Richard, Jr.; Sargent, Noel B.

    2009-01-01

    The existing lightning protection system at Pad 39B for the Space Shuttle is an outgrowth of a system that was put in place for the Apollo Program. Dr. Frank Fisher of Lightning Technologies was a key participant in the design and implementation of that system. He conveyed to the NESC team that the catenary wire provision was put in place quickly (as assurance against possible vehicle damage causing critical launch delays) rather than being implemented as a comprehensive system designed to provide a high degree of guaranteed protection. Also, the technology of lightning protection has evolved over time with considerable work being conducted by groups such as the electric utilities companies, aircraft manufacturers, universities, and others. Several accepted present-day methods for analysis of lightning protection were used by Drs. Medelius and Mata to study the expected lightning environment for the Pad 39B facility and to analyze the degree of protection against direct lightning attachment to the Space Shuttle. The specific physical configuration directly affects the vulnerability, so cases that were considered included the RSS next to and rolled back from the Space Shuttle, and the GOx Vent Arm both extended and withdrawn from the ET. Elements of the lightning protection system at Pad 39B are shown in Figure 6.0-1 and consist of an 80 foot insulating mast on top of the Fixed Support Structure (FSS), a catenary wire system that runs from the mast in a North/South direction to grounds 1000 feet away on each side of the mast, the RSS which can either be next to or away from the Space Shuttle, and a GOx vent that can either be extended or retracted from the top of the ET.

  4. Technical support for digital systems technology development. Task order 1: ISP contention analysis and control

    Science.gov (United States)

    Stehle, Roy H.; Ogier, Richard G.

    1993-01-01

    Alternatives for realizing a packet-based network switch for use on a frequency division multiple access/time division multiplexed (FDMA/TDM) geostationary communication satellite were investigated. Each of the eight downlink beams supports eight directed dwells. The design needed to accommodate multicast packets with very low probability of loss due to contention. Three switch architectures were designed and analyzed. An output-queued, shared bus system yielded a functionally simple system, utilizing a first-in, first-out (FIFO) memory per downlink dwell, but at the expense of a large total memory requirement. A shared memory architecture offered the most efficiency in memory requirements, requiring about half the memory of the shared bus design. The processing requirement for the shared-memory system adds system complexity that may offset the benefits of the smaller memory. An alternative design using a shared memory buffer per downlink beam decreases circuit complexity through a distributed design, and requires at most 1000 packets of memory more than the completely shared memory design. Modifications to the basic packet switch designs were proposed to accommodate circuit-switched traffic, which must be served on a periodic basis with minimal delay. Methods for dynamically controlling the downlink dwell lengths were developed and analyzed. These methods adapt quickly to changing traffic demands, and do not add significant complexity or cost to the satellite and ground station designs. Methods for reducing the memory requirement by not requiring the satellite to store full packets were also proposed and analyzed. In addition, optimal packet and dwell lengths were computed as functions of memory size for the three switch architectures.

  5. Decision making technical support study for the US Army's Chemical Stockpile Disposal Program

    Energy Technology Data Exchange (ETDEWEB)

    Feldman, D.L.; Dobson, J.E.

    1990-08-01

    This report examines the adequacy of current command and control systems designed to make timely decisions that would enable sufficient warning and protective response to an accident at the Edgewood area of Aberdeen Proving Ground (APG), Maryland, and at Pine Bluff Arsenal (PBA), Arkansas. Institutional procedures designed to facilitate rapid accident assessment, characterization, warning, notification, and response after the onset of an emergency and computer-assisted decision-making aids designed to provide salient information to on- and-off-post emergency responders are examined. The character of emergency decision making at APG and PBA, as well as potential needs for improvements to decision-making practices, procedures, and automated decision-support systems (ADSSs), are described and recommendations are offered to guide equipment acquisition and improve on- and off-post command and control relationships. We recommend that (1) a continued effort be made to integrate on- and off-post command control, and decision-making procedures to permit rapid decision making; (2) the pathways for alert and notification among on- and off-post officials be improved and that responsibilities and chain of command among off-post agencies be clarified; (3) greater attention be given to organizational and social context factors that affect the adequacy of response and the likelihood that decision-making systems will work as intended; and (4) faster improvements be made to on-post ADSSs being developed at APG and PBA, which hold considerable promise for depicting vast amounts of information. Phased development and procurement of computer-assisted decision-making tools should be undertaken to balance immediate needs against available resources and to ensure flexibility, equity among sites, and compatibility among on- and off-post systems. 112 refs., 6 tabs.

  6. Human Factors and Technical Considerations for a Computerized Operator Support System Prototype

    Energy Technology Data Exchange (ETDEWEB)

    Ulrich, Thomas Anthony [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lew, Roger Thomas [Idaho National Lab. (INL), Idaho Falls, ID (United States); Medema, Heather Dawne [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boring, Ronald Laurids [Idaho National Lab. (INL), Idaho Falls, ID (United States); Thomas, Kenneth David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-01

    A prototype computerized operator support system (COSS) has been developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based on four underlying elements consisting of a digital alarm system, computer-based procedures, PI&D system representations, and a recommender module for mitigation actions. At this point, the prototype simulates an interface to a sensor validation module and a fault diagnosis module. These two modules will be fully integrated in the next version of the prototype. The initial version of the prototype is now operational at the Idaho National Laboratory using the U.S. Department of Energy’s Light Water Reactor Sustainability (LWRS) Human Systems Simulation Laboratory (HSSL). The HSSL is a full-scope, full-scale glass top simulator capable of simulating existing and future nuclear power plant main control rooms. The COSS is interfaced to the Generic Pressurized Water Reactor (gPWR) simulator with industry-typical control board layouts. The glass top panels display realistic images of the control boards that can be operated by touch gestures. A section of the simulated control board was dedicated to the COSS human-system interface (HSI), which resulted in a seamless integration of the COSS into the normal control room environment. A COSS demonstration scenario has been developed for the prototype involving the Chemical & Volume Control System (CVCS) of the PWR simulator. It involves a primary coolant leak outside of containment that would require tripping the reactor if not mitigated in a very short timeframe. The COSS prototype presents a series of operator screens that provide the needed information and soft controls to successfully mitigate the event.

  7. Autonomy support and control in weight management: what important others do and say matters.

    Science.gov (United States)

    Ng, Johan Y Y; Ntoumanis, Nikos; Thøgersen-Ntoumani, Cecilie

    2014-09-01

    Drawing from self-determination theory (Ryan & Deci, 2002, Overview of self-determination theory: An organismic-dialectical perspective. In E. L. Deci & R. M. Ryan (Eds.), Handbook of self-determination research (pp. 3-33). Rochester, NY: The University of Rochester Press.), we examined how individuals' psychological needs, motivation, and behaviours (i.e., physical activity and eating) associated with weight management could be predicted by perceptions of their important others' supportive and controlling behaviours. Using a cross-sectional survey design, 235 participants (mean age = 27.39 years, SD = 8.96 years) completed an online questionnaire. Statistical analyses showed that when important others were perceived to be more supportive, participants reported higher levels of more optimal forms of motivation for weight management, which in turn predicted more physical activity and healthy eating behaviours. In contrast, when important others were perceived to be controlling, participants reported higher levels of less optimal forms of motivation, which in turn predicted less physical activity and healthy eating behaviours, as well as more unhealthy eating behaviours. Significant indirect effects were also found from perceived support and control from important others to physical activity and eating behaviours, all in the expected directions. The findings support the importance of important others providing support and refraining from controlling behaviours in order to facilitate motivation and behaviours conducive to successful weight management. What is already known on this subject? Autonomy support is related to basic need satisfaction and autonomous motivation in the context of weight management. In turn, these variables are related to adaptive outcomes for weight management. What does this study add? Measurement of perceived controlling behaviours by important others. Measurement of perceived need thwarting. Structural model on how important others affect

  8. Imagining Technicities

    DEFF Research Database (Denmark)

    Liboriussen, Bjarke; Plesner, Ursula

    2011-01-01

    to the elements of taste and skill. In the final analysis those references were synthesized as five imagined technicities: the architect, the engineer, the client, the Chinese, and the Virtual World native. Because technicities are often assumed and rarely discussed as actants who influence practice, their role......, this article focuses on innovative uses of virtual worlds in architecture. We interviewed architects, industrial designers and other practitioners. Conceptually supported by an understanding of technicity found in Cultural Studies, the interviews were then coded with a focus on interviewees’ references...... in cooperation and development of ICTs seems to pass unnoticed. However, since they are aligned into ICTs, technicities impact innovation....

  9. Size Matters: The Link between Staff Size and Perceived Organizational Support in Early Childhood Education

    Science.gov (United States)

    Ho, Dora; Lee, Moosung; Teng, Yue

    2016-01-01

    Purpose: The purpose of this paper is to examine the relationship between staff size and perceived organizational support (POS) in early childhood education (ECE) organizations. Design/methodology/approach: A territory-wide questionnaire survey was designed to investigate the perceptions of preschool teachers in Hong Kong on four dimensions of…

  10. The Racial Divide in Support for the Death Penalty: Does White Racism Matter?

    Science.gov (United States)

    Unnever, James D.; Cullen, Francis T.

    2007-01-01

    Using data from the 2000 National Election Study, this research investigates the sources of the racial divide in support for capital punishment with a specific focus on white racism. After delineating a measure of white racism, we explore whether it can account for why a majority of African Americans oppose the death penalty while most whites…

  11. Does the severity of disability matter? : The opinion of parents about professional support in residential facilities

    NARCIS (Netherlands)

    Luijkx, J.; Ten Brug, A.; Vlaskamp, C.

    BACKGROUND: Researchers have shown that the characteristics of a person with an intellectual disability (ID), in particular the severity of the disability, are related to the outcomes of professional support. Hardly any studies have asked parents and/or legal guardians for their own opinion about

  12. Empirically Supported Psychotherapy in Social Work Training Programs: Does the Definition of Evidence Matter?

    Science.gov (United States)

    Bledsoe, Sarah E.; Weissman, Myrna M.; Mullen, Edward J.; Ponniah, Kathryn; Gameroff, Marc J.; Verdeli, Helen; Mufson, Laura; Fitterling, Heidi; Wickramaratne, Priya

    2007-01-01

    Objectives: A national survey finds that 62% of social work programs do not require didactic and clinical supervision in any empirically supported psychotherapy (EST). The authors report the results of analysis of national survey data using two alternative classifications of EST to determine if the results are because of the definition of EST used…

  13. Gender difference in support for democracy in Sub-Saharan Africa: Do social institutions matter?

    NARCIS (Netherlands)

    Konte, M.

    2014-01-01

    Little investigation has been made to explain why women are less likely than are men to support democracy in Sub-Saharan Africa. This gender difference in politics has been found in numerous studies and may hinder the much needed legitimation of democracy in this region. This paper addresses the

  14. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 6. Baseline rock properties-shale

    International Nuclear Information System (INIS)

    1978-04-01

    This volume, Y/OWI/TM36/6 Baseline Rock Properties--Shale, is one of a 23-volume series, ''Technical Support for GEIS: Radioactive Waste Isolation in Geologic Formations, Y/OWI/TM-36'' which supplements a ''Contribution to Draft Generic Environmental Impact Statement on Commercial Waste Management: Radioactive Waste Isolation in Geologic Formations, Y/OWI/TM-44.'' The series provides a more complete technical basis for the preconceptual designs, resource requirements, and environmental source terms associated with isolating commercial LWR wastes in underground repositories in salt, granite, shale and basalt. Wastes are considered from three fuel cycles: uranium and plutonium recycling, no recycling of spent fuel and uranium-only recycling. The report is a result of a literature survey of the rock properties of shales occurring in the United States. Firstly, data were collected from a wide variety of sources in order to obtain a feel for the range of properties encountered. Secondly, some typical shales were selected for detailed review and these are written up as separate chapters in this report. Owing to the wide variability in lithology and properties of shales occurring in the United States, it became necessary to focus the study on consolidated illite shales. Using the specific information already generated, a consistent set of intact properties for a typical, consolidated illite shale was obtained. Correction factors, largely based on geological considerations, were then applied to the intact data in order to yield typical rock mass properties for this type of shale. Lastly, excavation problems in shale formations were reviewed and three tunnel jobs were written up as case histories

  15. Involvement of stakeholders in the work of Technical Support Organisation: a strategy to learn together a new way of working

    International Nuclear Information System (INIS)

    Rollinger, Francois; Petitfrere, Michael

    2008-01-01

    Full text: Society's concerns have led to changes in the legal framework towards a greater requirement for public information and participation in decision-making processes. International organisations such as the OECD/NEA and the IAEA have also made similar changes. Moving towards expertise sharing is a development that demands a real change of culture on the part of all players, putting technical issues as part of a broader process of evaluation and decision-making. Which evolutions are necessary to the way Technical Support Organisations work to introduce a fourth player the population representatives in controlling radiological and nuclear risk? Developing experimental expert assessment processes involving parts of civil society that both sides can learn from one another is the core of IRSN's strategy for opening its expertise to civil society. In this perspective a dedicated team is responsible for carrying out actions in consultation with stakeholders from civil society. Two pluralistic assessment groups have been set up on radiological protection issues, and their innovative method of operation is worth highlighting. Another participative action is the development jointly with the Local Committees in the Loire Valley of methods of collecting environmental monitoring data. An internal network dedicated to stakeholder involvement has also been set up to accompany and promote this new approach internally. IRSN is currently elaborating a charter which will make public its commitments to the society related to stakeholder's involvement. Finally IRSN also intends to take advantage of existing experiences elsewhere and has been working for three years with four other assessments agencies in France in the frame of health and environmental risks about this new challenge: involving civil society in the assessments preceding the decision-making. (author)

  16. Why power matters: creating a foundation of mutual support in couple relationships.

    Science.gov (United States)

    Knudson-Martin, Carmen

    2013-03-01

    Research shows that equal power helps couples create intimacy and relationship success. However, though couples increasingly desire equal relationships, cultural models of mutual support are not well developed. Clinicians often approach heterosexual couple therapy as though partners are inherently equal, thus reinforcing unacknowledged gender inequities. This article examines research that shows why power imbalances are destructive to intimate relationships and focuses on four gender-related aspects of mutual support: (a) shared relational responsibility, (b) mutual vulnerability, (c) mutual attunement, and (d) shared influence. Case examples illustrate how socio-emotional attunement, interrupting the flow of power, and introducing alternative relational experience help couple therapists identify and address power disparities in these important relational processes. Encouraging the powerful person to take relational initiative and introducing alternative gender discourse are especially important. © FPI, Inc.

  17. Polygamy and poor mental health among Arab Bedouin women: do socioeconomic position and social support matter?

    Science.gov (United States)

    Daoud, Nihaya; Shoham-Vardi, Ilana; Urquia, Marcelo Louis; O'Campo, Patricia

    2014-08-01

    Polygamy is a complex phenomenon and a product of power relations, with deep cultural, social, economic, and political roots. Despite being banned in many countries, the practice persists and has been associated with women's marginalization and mental health sequelae. In this study, we sought to improve understanding of this ongoing, complex phenomenon by examining the contribution of socioeconomic position (SEP) and social support to the excess of depressive symptoms (DS) and poor self-rated health (SRH) among women in polygamous marriages compared to women in monogamous marriages. Measuring the contribution of these factors could facilitate policies and interventions aimed at protecting women's mental health. The study was conducted among a sample of Arab Bedouin women living in a marginalized community in southern Israel (N=464, age 18-50). The women were personally interviewed in 2008-2009. We then used logistic regression models to calculate the contribution of SEP (as defined by the women's education, family SEP, and household characteristics) and social support to excess of depressive symptoms and poor SRH among participants in polygamous versus monogamous marriages. About 23% of the participants were in polygamous marriages. These women reported almost twice the odds of depressive symptoms (OR=1.91, 95%CI=1.22, 2.99) and poorer SRH (OR=1.73, 95%CI=1.10, 2.72) than those in monogamous marriages. Women's education changed these associations slightly, but family SEP and household characteristics resulted in virtually no further change. Social support reduced the odds for poor SRH and DS by about 23% and 28%, respectively. Polygamy is associated with higher risk for poor mental health of women regardless of their SEP and education. Social support seems to have some protective effect.

  18. Does perceived teacher affective support matter for middle school students in mathematics classrooms?

    Science.gov (United States)

    Sakiz, Gonul; Pape, Stephen J; Hoy, Anita Woolfolk

    2012-04-01

    The purpose of the present study was to explore the importance of perceived teacher affective support in relation to sense of belonging, academic enjoyment, academic hopelessness, academic self-efficacy, and academic effort in middle school mathematics classrooms. A self-report survey was administered to 317 seventh- and eighth-grade students in 5 public middle schools. Structural equation modeling indicated significant associations between perceived teacher affective support and middle school students' motivational, emotional, and behavioral outcomes. The structural model explained a significant proportion of variance in students' sense of belonging (42%), academic enjoyment (43%), self-efficacy beliefs (43%), academic hopelessness (18%), and academic effort (32%) in mathematics classrooms. In addition to providing the basis for a concise new measure of perceived teacher affective support, these findings point to the importance of students' perceptions of the affective climate within learning environments for promoting academic enjoyment, academic self-efficacy, and academic effort in mathematics. Copyright © 2011 Society for the Study of School Psychology. Published by Elsevier Ltd. All rights reserved.

  19. Family and peer support matter for precoital and coital behaviors among adolescents in Lima

    Science.gov (United States)

    Bayer, Angela M.; Cabrera, Lilia Z.; Gilman, Robert H.; Hindin, Michelle J.; Tsui, Amy O.

    2015-01-01

    We analyzed the association between sub-scales developed with adolescents and the outcomes of precoital behaviors and vaginal sex in Lima, Peru. Adolescent participants in key informant sessions operationalized concepts identified during qualitative concept mapping into several sub-scales. Face and content validity testing and pilot application with respondent debriefing were used to refine the sub-scales. Three hundred 15–17 year olds were surveyed about the sub-scales, socio-demographics and sexual behaviors. Exploratory factor analysis confirmed six sub-scales, self-image, goals and decision-making, family education, parental rules/control, school support and peer support, which we regressed on the outcomes. Twice as many males as females reported more than three precoital behaviors and vaginal sex. Higher peer support reduced the likelihood of vaginal sex and precoital behaviors and higher family education reduced precoital behaviors. Results affirm the importance of including adolescents in the entire research process and of sex education with family- and peer-based strategies. PMID:25305443

  20. LHCb support team - technical

    CERN Multimedia

    Rademakers, F

    2009-01-01

    Pictures 1-4: Cédric Fournier Pictures 5-7: Patrick Vallet Pictures 8-11: Franck Lamour, Patrick Vallet, Bernard Chadaj, Gérard Decreuse, Cédric Fournier and Bernard Corajod Pictures 12-15: Franck Lamour Pictures 16-18: Bernard Chadaj Pictures 19-22: Bernard Corajod and Gérard Decreuse

  1. Licensing of safety critical software for nuclear reactors. Common position of seven European nuclear regulators and authorised technical support organisations

    International Nuclear Information System (INIS)

    2007-01-01

    licensing software-based systems. This document should neither be considered as a standard, nor as a new set of European regulations, nor as a common subset of national regulations, nor as a replacement for national policies. It is the account, as complete as possible, of a common technical agreement among regulatory and safety experts. National regulations may have additional requirements or different requirements, but hopefully in the end no essential divergence with the common positions. It is precisely from this common agreement that regulators can draw support and benefit when assessing safety cases, licensee's submissions, and issuing regulations. The document is also useful to licensees, designers, suppliers for issuing bids and developing new applications. Evidence to support the safety demonstration of a computer based digital system is produced throughout the system life cycle, and evolves in nature and substance with the project. The task force has adopted the view that three basic independent types of evidence can and must be produced: evidence related to the quality of the development process; evidence related to the adequacy of the product; and evidence of the competence and qualifications of the staff involved in all of the system life cycle phases. In addition, convincing operating experience may be needed to support the safety demonstration of pre-existing software. As a consequence, the task force reached early agreement on an important fundamental recommendation that applies at the inception of any project, namely: A safety plan shall be agreed upon at the beginning of the project between the licensor and the licensee. This plan shall identify how the safety demonstration will be achieved. More precisely, the plan shall identify the types of evidence that will be used, and how and when this evidence shall be produced. This report neither specifies nor imposes the contents of a specific safety plan. All the subsequent recommendations are founded on the

  2. CosmoQuest: Supporting Subject Matter Experts in Broadening the Impacts of their Work beyond their Institutional Walls.

    Science.gov (United States)

    Noel-Storr, J.; Buxner, S.; Grier, J.; Gay, P.

    2016-12-01

    CosmoQuest is a virtual research facility, which, like its physical counterparts, provides tools for scientists to acquire reduced data products (thanks to our cadre of citizen scientists working to analyze images and produce results online), and also to participate in education and outreach activities either directly through CosmoQuest activities (such as CosmoAcademy and the Educators' Zone) or with the support of CosmoQuest. Here, we present our strategies to inspire, engage and support Subject Matter Experts (SMEs - Scientists, Engineers, Technologists and Mathematicians) in activities outside of their institutions, and beyond college classroom teaching. We provide support for SMEs who are interested in increasing the impacts of their science knowledge and expertise by interacting with people online, or in other venues outside of their normal work environment. This includes a broad spectrum of opportunities for those interested in hosting webinars; running short courses for the public; using Facebook, Twitter or other social media to communicate science; or other diverse activities such as supporting an open house, science fair, or star party. As noted by Katheryn Woods-Townsend and colleagues, "...face-to-face interactions with scientists allowed students to view scientists as approachable and normal people, and to begin to understand the range of scientific areas and careers that exist. Scientists viewed the scientist-student interactions as a vehicle for science communication" (2015). As CosmoQuest fosters these relationships, it We present a framework for SMEs which combine opportunities for continuing professional development (virtually and in person at conferences) with ongoing online support, creating a dynamic professional learning network. The goal of this is to deepen SME capacity-knowledge, attitudes and behaviors-both encouraging and empowering them to connect to broader audiences in new ways.

  3. Fathers Matter: The Role of Father Autonomy Support and Control in Preschoolers' Executive Function Development

    Science.gov (United States)

    Meuwissen, Alyssa S.; Carlson, Stephanie M.

    2015-01-01

    Although previous work has shown that mothers' parenting influences the development of child executive function (important self-control skills developed in the preschool years) the role of fathers' parenting has not been thoroughly investigated. We observed fathers' autonomy support and control in dyadic play with their 3-year-old children (N pairs = 110), and measured father and child EF independently with laboratory tasks. We found that fathers' controlling parenting was significantly inversely related to the child EF composite, above and beyond family income and child verbal ability. These results are consistent with the hypothesis that fathers are important for the development of EF in their children, and suggest fathers should be included in both research and parenting interventions. PMID:26209884

  4. Technical Assistance and Program Support: DoD Historical Black Colleges and Universities and Minority Institutions Program

    National Research Council Canada - National Science Library

    Andrews, Aaron

    2003-01-01

    ... (His), the United Negro College Fund Special Programs developed and implemented a comprehensive technical assistance and infrastructure program This program has provided HBCUs, HSIs, TCUs, and MIs...

  5. Development of a support system to make economic and technical assessments for the issues relating to plant life extension

    International Nuclear Information System (INIS)

    Takao, T.; Soneda, N.; Sakai, T.

    1994-01-01

    To realize the life extension of nuclear power plants, overall evaluation for the plant is required, which covers technology, economy such as cost of repair or/and replacement of components, and regal regulations for licensing. A prototype of integrated assessment support system for life extension ''INPLEX'' have developed in order to evaluate the technical and economic issues relating to the plant life extension and to make a life extension scenario. Analysis procedure of INPLEX is as follows. A comparison of the cost between the life extension and the reconstruction is made to see whether the life extension is cost effective or not. Next, components required detailed assessments are selected, and the residual life assessment of these components are made. After those procedures life extension measures are selected and the implementation time schedule is set on the basis of the formulas for predicting the degradation of the components and the component reliability data. Finally the implementation time schedule is optimized from the viewpoint of economy, and the life extension scenario is proposed. INPLEX also has the data base ''PRINS'', in which information and data related to life extension are registered, such as component degradation experiences, degradation management methodologies, degradation mitigation measures, and so on. PRINS can be referred at any time during the operation of INPLEX

  6. Water reactor fuel element modelling at high burnup and its experimental support. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    1997-08-01

    The Technical Committee Meeting on Fuel Element Modelling at High Burnup and its Experimental Support was recommended by the International Working Group on Fuel Performance and Technology (IWGFPT). Its subject had been touched on in many of the IAEA's activities; however for the first time modellers and experimentalists were brought together to have an exchange of views on the research under way and to identify areas where new knowledge is necessary to improve the safety, reliability and/or economics of nuclear fuel. The timely organization of this meeting in conjunction with the second meeting of the Co-ordinated Research Programme on Fuel Modelling at Extended Burnup, in short ''FUMEX'', allowed fruitful participation of representatives of developing countries which are only rarely exposed to such a scientific event. The thirty-nine papers presented covered the status of codes and experimental facilities and the main phenomena affecting the fuel during irradiation, namely: thermal fuel performance, clad corrosion and pellet-cladding interaction (PCI) and fission gas release (FGR). Refs, figs, tabs

  7. Water reactor fuel element modelling at high burnup and its experimental support. Proceedings of a technical committee meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-08-01

    The Technical Committee Meeting on Fuel Element Modelling at High Burnup and its Experimental Support was recommended by the International Working Group on Fuel Performance and Technology (IWGFPT). Its subject had been touched on in many of the IAEA`s activities; however for the first time modellers and experimentalists were brought together to have an exchange of views on the research under way and to identify areas where new knowledge is necessary to improve the safety, reliability and/or economics of nuclear fuel. The timely organization of this meeting in conjunction with the second meeting of the Co-ordinated Research Programme on Fuel Modelling at Extended Burnup, in short ``FUMEX``, allowed fruitful participation of representatives of developing countries which are only rarely exposed to such a scientific event. The thirty-nine papers presented covered the status of codes and experimental facilities and the main phenomena affecting the fuel during irradiation, namely: thermal fuel performance, clad corrosion and pellet-cladding interaction (PCI) and fission gas release (FGR). Refs, figs, tabs.

  8. Activities of Institute of Radiation Protection and Dosimety/Brazil as Technical and Scientific Support Organization on Occupational Radiation Protection

    International Nuclear Information System (INIS)

    Da Silva, F.C.A.; Ferreira, P.R.; Matta, L.E.C.; Peres, M.A.L.; Godoy, J.M.; Alencar, M.A.V.; Carlos, M.T.; Souza-Santos, D.; Leocadio, J.C.; Oliveira, M.S.

    2010-01-01

    There are, in Brazil, about 126,000 workers registered on National Dose Registry System (SRD/IRD) as occupationally exposed. They work on 4,000 radioactive installations, 20 nuclear fuel cycle installations and with 90,000 x-ray diagnostic devices. There are two main Regulatory Authorities to license and control these installations on nuclear and radioactive areas, and another Regulatory Authority that is responsible for safety and health protection of workers on their labour activities. Belonging to structure of the National Commission of Nuclear Energy (CNEN-Brazil) there is an Institute dedicated to radiation protection, dosimetry and metrology of ionizing radiation, that is the Institute of Radiation Protection and Dosimetry (IRD). This paper presents two main IRD activities related to occupational radiation protection that can be seen as example of technical and scientific support to Regulatory Authorities: the Radiation Overexposure Analysis that is performed by the Radiation Overexposure Analysis Group (GADE) and the Approval of Individual Monitoring Services and Calibration Laboratory of Equipment used in Radiation Protection that is performed by the Committee for the Evaluation of Essay and Calibration Services (CASEC). (author)

  9. Feasible way of Human Solid and Liquid Wastes' Inclusion Into Intersystem Mass Exchange of Biological-Technical Life Support Systems

    Science.gov (United States)

    Ushakova, Sofya; Tikhomirov, Alexander A.; Tikhomirova, Natalia; Kudenko, Yurii; Griboskaya, Illiada; Gros, Jean-Bernard; Lasseur, Christophe

    The basic objective arising at use of mineralized human solid and liquid wastes serving as the source of mineral elements for plants cultivation in biological-technical life support systems appears to be NaCl presence in them. The given work is aimed at feasibility study of mineralized human metabolites' utilization for nutrient solutions' preparation for their further employment at a long-term cultivation of uneven-aged wheat and Salicornia europaea L. cenosis in a conveyer regime. Human solid and liquid wastes were mineralized by the "wet incineration" method developed by Yu. Kudenko. On their base the solutions were prepared which were used for cultivation of 5-aged wheat conveyer with the time step-interval of 14 days. Wheat was cultivated by hydroponics method on expanded clay aggregate. For partial demineralization of nutrient solution every two weeks after regular wheat harvesting 12 L of solution was withdrawn from the wheat irrigation tank and used for Salicornia europaea cultivation by the water culture method in a conveyer regime. The Salicornia europaea conveyer was represented by 2 ages with the time step-interval of 14 days. Resulting from repeating withdrawal of the solution used for wheat cultivation, sodium concentration in the wheat irrigation solution did not exceed 400 mg/l, and mineral elements contained in the taken solution were used for Salicornia europaea cultivation. The experiment lasted 7 months. Total wheat biomass productivity averaged 30.1 g*m-2*day-1 at harvest index equal to 36.8The work was carried out under support of SB RAS grant 132 and INTAS 05-1000008-8010

  10. The Science of Nuclear Safety and Security. IAEA Backs the Work of Technical and Scientific Support Organizations in Safety and Security

    International Nuclear Information System (INIS)

    Verlini, Giovanni

    2011-01-01

    Expertise in physical protection and accounting of nuclear and other radioactive material in use, storage and transport, and the associated facilities, as well as experience in the maintenance of systems, equipment and associated software used for effective border monitoring and for radiological threat assessment, are the fundaments of safety and security. This knowledge is developed through technical and scientific support organizations (TSOs), neutral and official organizations that provide the basis for decisions and activities regarding nuclear and radiation safety. The quality of the technical and scientific expertise provided by TSOs to the nuclear industry and their contribution to effective regulatory systems are of fundamental importance. For many years, the IAEA has been supporting the work of TSOs, by helping the TSOs promote their technical competence, transparency and observance of ethical principles.

  11. Commentary: Supporting preterm children's parents matters - a reflection on Treyvaud et al. (2016).

    Science.gov (United States)

    Jaekel, Julia

    2016-07-01

    Children born preterm or with low birth weight (LBW) grow up with an increased risk for a range of neurodevelopmental, cognitive, socioemotional, and academic problems. While long-term effects of preterm and LBW birth have traditionally been studied from a deficit perspective, Treyvaud et al. correctly state that the increased risk for impairments in this population urgently requires identification of protective factors. Their new findings add to empirical evidence from observational studies showing that sensitive parenting can protect preterm children from negative developmental outcomes. In order to identify strategies that support preterm children's life chances, well-designed longitudinal studies, such as the one by Treyvaud et al., are indispensable. Next, we will need large randomized trials to test the causality between intervention-induced parenting changes and preterm children's long-term outcomes. We need interdisciplinary and international collaboration to study preterm parent-child dyads within multimethod frameworks and uncover the highly complex mechanisms that shape individual developmental trajectories. © 2016 Association for Child and Adolescent Mental Health.

  12. Population and harvest trends of big game and small game species: a technical document supporting the USDA Forest Service Interim Update of the 2000 RPA Assessment

    Science.gov (United States)

    Curtis H. Flather; Michael S. Knowles; Stephen J. Brady

    2009-01-01

    This technical document supports the Forest Service's requirement to assess the status of renewable natural resources as mandated by the Forest and Rangeland Renewable Resources Planning Act of 1974 (RPA). It updates past reports on national and regional trends in population and harvest estimates for species classified as big game and small game. The trends...

  13. Geographic patterns of at-risk species: A technical document supporting the USDA Forest Service Interim Update of the 2000 RPA Assessment

    Science.gov (United States)

    Curtis H. Flather; Michael S. Knowles; Jason McNees

    2008-01-01

    This technical document supports the Forest Service's requirement to assess the status of renewable natural resources as mandated by the Forest and Rangeland Renewable Resources Planning Act of 1974. It updates past reports on the trends and geographic patterns of species formally listed as threatened or endangered under the Endangered Species Act of 1973. We...

  14. Grower networks support adoption of innovations in pollination management: The roles of social learning, technical learning, and personal experience.

    Science.gov (United States)

    Garbach, Kelly; Morgan, Geoffrey P

    2017-12-15

    Management decisions underpinning availability of ecosystem services and the organisms that provide them in agroecosystems, such as pollinators and pollination services, have emerged as a foremost consideration for both conservation and crop production goals. There is growing evidence that innovative management practices can support diverse pollinators and increase crop pollination. However, there is also considerable debate regarding factors that support adoption of these innovative practices. This study investigated pollination management practices and related knowledge systems in a major crop producing region of southwest Michigan in the United States, where 367 growers were surveyed to evaluate adoption of three innovative practices that are at various stages of adoption. The goals of this quantitative, social survey were to investigate grower experience with concerns and benefits associated with each practice, as well as the influence of grower networks, which are comprised of contacts that reflect potential pathways for social and technical learning. The results demonstrated that 17% of growers adopted combinations of bees (e.g. honey bees, Apis mellifera, with other species), representing an innovation in use by early adopters; 49% of growers adopted flowering cover crops, an innovation in use by the early majority 55% of growers retained permanent habitat for pollinators, an innovation in use by the late majority. Not all growers adopted innovative practices. We found that growers' personal experience with potential benefits and concerns related to the management practices had significant positive and negative relationships, respectively, with adoption of all three innovations. The influence of these communication links likely has different levels of importance, depending on the stage of the adoption that a practice is experiencing in the agricultural community. Social learning was positively associated with adopting the use of combinations of bees

  15. Family matters: Familial support and science identity formation for African American female STEM majors

    Science.gov (United States)

    Parker, Ashley Dawn

    This research seeks to understand the experiences of African American female undergraduates in STEM. It investigates how familial factors and science identity formation characteristics influence persistence in STEM while considering the duality of African American women's status in society. This phenomenological study was designed using critical race feminism as the theoretical framework to answer the following questions: 1) What role does family play in the experiences of African American women undergraduate STEM majors who attended two universities in the UNC system? 2) What factors impact the formation of science identity for African American women undergraduate STEM majors who attended two universities in the UNC system? Purposive sampling was used to select the participants for this study. The researcher conducted in-depth interviews with 10 African American female undergraduate STEM major from a predominantly White and a historically Black institution with the state of North Carolina public university system. Findings suggest that African American families and science identity formation influence the STEM experiences of the African American females interviewed in this study. The following five themes emerged from the findings: (1) independence, (2) support, (3) pressure to succeed, (4) adaptations, and (5) race and gender. This study contributes to the literature on African American female students in STEM higher education. The findings of this study produced knowledge regarding policies and practices that can lead to greater academic success and persistence of African American females in higher education in general, and STEM majors in particular. Colleges and universities may benefit from the findings of this study in a way that allows them to develop and sustain programs and policies that attend to the particular concerns and needs of African American women on their campuses. Finally, this research informs both current and future African American female

  16. Guidance document for revision of DOE Order 5820.2A, Radioactive Waste Technical Support Program. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Kudera, D.E.; McMurtrey, C.D.; Meagher, B.G.

    1993-04-01

    This document provides guidance for the revision of DOE Order 5820.2A, ``Radioactive Waste Management.`` Technical Working Groups have been established and are responsible for writing the revised order. The Technical Working Groups will use this document as a reference for polices and procedures that have been established for the revision process. The overall intent of this guidance is to outline how the order will be revised and how the revision process will be managed. In addition, this document outlines technical issues considered for inclusion by a Department of Energy Steering Committee.

  17. Challenges Faced by Regulators and Technical, Scientific and Support Organizations (TSOs) in Enhancing Nuclear Safety and Security

    International Nuclear Information System (INIS)

    Travers, W.D.

    2011-01-01

    Renewed interest in new reactor build programmes, not only in countries with already established nuclear programmes but also in many other countries with limited or no workforce experienced in the design, licensing, construction and operation of nuclear power plants, has resulted in a need for technical, scientific and support organizations (TSOs) to support regulatory bodies in carrying out their mandated responsibilities. The primary function of a regulatory body, such as the Federal Authority for Nuclear Regulation (FANR) in the United Arab Emirates (UAE), is to regulate the safe use of nuclear facilities and radioactive material for peaceful civilian purposes. In so doing, the regulatory body needs to provide a clear and focused approach to: safety, security and safeguards for licensing; inspection and enforcement of reactor design; construction; commissioning; operation; decommissioning; nuclear waste management activities; and the use, possession or transfer of special nuclear materials and activities within the country. Accomplishing this goal requires a highly educated, multidisciplinary, diverse workforce with significant work experience. Recognizing that it takes several decades and a lot of resources to achieve self-sufficiency, many countries, particularly emergent nuclear countries, would have to rely on TSOs to start their programmes and to carry out their oversight responsibilities. Towards that end, FANR is working closely with international counterparts, the International Atomic Energy Agency and TSOs to exchange information, expertise, industry experience and ongoing research to ensure that high levels of safety, security and safeguards are established and maintained in reactor design and operation throughout the life of the facility, and that special nuclear material within the UAE is properly documented and controlled, is not stolen, lost or diverted to any illicit or non-peaceful activities, and does not pose unreasonable radiological risk due

  18. Technical and scientific support to nuclear regulatory authority in Montenegro. Present situation and outlooks for the future

    International Nuclear Information System (INIS)

    Jovanovic, S.

    2007-01-01

    Nuclear regulatory competences in the Republic of Montenegro are shared between the ministries of health and of the environment. Following the independence of the country by mid 2006, Radiation Protection Commission (RPC) is established within the Ministry of Health, so as to match the regulatory role for the sources used in medicine. A similar step is expected to be made soon within the Ministry of the Environment, too. The two commissions will likely and logically merge into one, representing an interim regulatory authority to be functioning until a full capacity and effectively independent regulatory body is established by new nuclear law. Promulgation of the latter is expected to take part in the course of 2007. Let us mention here that the law in force is one from 1996 - quite obsolete and not taking into consideration the Basic Safety Standards (IAEA, 1996) and subsequent IAEA and EU documents in the field. Montenegro is a small, non-nuclear country (no nuclear installations or fuel cycle segments), the use of radiation sources being limited mostly to medical and industrial applications. Technical support to regulatory functions, in whatever basic form these were effectuated up to now, was/is given by the Centre for Eco-Toxicological Research of Montenegro (CETI), Department of Radiation Protection and Monitoring, in Podgorica. As to scientific support, it is fundamentally to be found at the University of Montenegro, Faculty of Sciences (FS), Department of Physics. While CETI is relatively well equipped, running quite a modern nuclear spectrometry laboratory (alpha, beta and gamma spectrometry, radon measurements) and having a decent dosimetry unit (TLD, field and workplace monitoring), FS is practically limited to sporadic theoretical studies, with very poor laboratory capabilities. Environmental radioactivity monitoring is performed by CETI, following the programme defined by the government. Licensing and inspections are the two regulatory functions still

  19. FY 2016 Grant Announcement: FY 2016 Technical Analysis and Programmatic Evaluation Support to the Chesapeake Bay Program Partnership

    Science.gov (United States)

    The U.S. Environmental Protection Agency’s Chesapeake Bay Program Office is announcing a Request for Proposals for applicants to provide the Chesapeake Bay Program partners with a proposal(s) for providing technical analysis and programmatic evaluation

  20. GPHS-RTGs in support of the Cassini Mission. Semi annual technical progress report, 1 April 1996--29 September 1996

    International Nuclear Information System (INIS)

    1996-01-01

    This technical progress report discusses work on the Radioisotope Generators and Ancillary Activities for the Cassini spacecraft. The Cassini spacecraft is expected to launch in October 1997, and will explore Saturn and its moons. This progress report discusses issues in: spacecraft integration and liason, engineering support, safety, qualified unicouple fabrication, ETG fabrication and testing, ground support equipment, RTG shipping and launch support, designs, reviews and mission application. Safety analysis of the RTGs during reentry and launch accidents are covered. This report covers the period of April 1 to September 29, 1996

  1. GPHS-RTGs in support of the Cassini mission. Semi annual technical progress report, 2 October 1995--31 March 1996

    International Nuclear Information System (INIS)

    1996-01-01

    The technical progress achieved during the period 2 October 1995 through 31 March 1996 on Contract No. DE-AC03-91SF18852, Radioisotope Generators and Ancillary Activities is described herein. This report is organized by the program task structure as follows: spacecraft integration and liaison; engineering support; safety; qualified unicouple fabrication; ETG fabrication, assembly, and test; ground support equipment (GSE); RTG shipping and launch support; designs, reviews, and mission applications; project management, quality assurance and reliability, contract changes, non-capital CAGO acquisition, and CAGO maintenance; contract acquired government-owned property (CAGO) acquisition; and program calendars

  2. A Case Study in Competitive Technical and Market Intelligence Support and Lessons Learned for the uChemLab LDRD Grand Challenge Project; TOPICAL

    International Nuclear Information System (INIS)

    SOUTHWELL, EDWIN T.; GARCIA, MARIE L.; MEYERS, CHARLES E.

    2001-01-01

    The(mu)ChemLab(trademark) Laboratory Directed Research and Development (LDRD) Grand Challenge project began in October 1996 and ended in September 2000. The technical managers of the(mu)ChemLab(trademark) project and the LDRD office, with the support of a consultant, conducted a competitive technical and market demand intelligence analysis of the(mu)ChemLab(trademark). The managers used this knowledge to make project decisions and course adjustments. CTI/MDI positively impacted the project's technology development, uncovered potential technology partnerships, and supported eventual industry partner contacts. CTI/MDI analysis is now seen as due diligence and the(mu)ChemLab(trademark) project is now the model for other Sandia LDRD Grand Challenge undertakings. This document describes the CTI/MDI analysis and captures the more important ''lessons learned'' of this Grand Challenge project, as reported by the project's management team

  3. The need for sustainability and alignment of future support for National Immunization Technical Advisory Groups (NITAGs) in low and middle-income countries.

    Science.gov (United States)

    Howard, Natasha; Bell, Sadie; Walls, Helen; Blanchard, Laurence; Brenzel, Logan; Jit, Mark; Mounier-Jack, Sandra

    2018-02-22

    National Immunisation Technical Advisory Groups (NITAGs) provide independent guidance to health ministries to support evidence-based and nationally relevant immunisation decisions. We examined NITAGs' value, sustainability, and need for support in low and middle-income countries, drawing from a mixed-methods study including 130 global and national-level key informant interviews. NITAGs were particularly valued for providing independent and nationally owned evidence-based decision-making (EBDM), but needed to be integrated within national processes to effectively balance independence and influence. Participants agreed that most NITAGs, being relatively new, would need developmental and strengthening support for at least a decade. While national governments could support NITAG functioning, external support is likely needed for requisite capacity building. This might come from Gavi mechanisms and WHO, but would require alignment among stakeholders to be effective.

  4. Toward an evidence-based system for innovation support for implementing innovations with quality: tools, training, technical assistance, and quality assurance/quality improvement.

    Science.gov (United States)

    Wandersman, Abraham; Chien, Victoria H; Katz, Jason

    2012-12-01

    An individual or organization that sets out to implement an innovation (e.g., a new technology, program, or policy) generally requires support. In the Interactive Systems Framework for Dissemination and Implementation, a Support System should work with Delivery Systems (national, state and/or local entities such as health and human service organizations, community-based organizations, schools) to enhance their capacity for quality implementation of innovations. The literature on the Support System [corrected] has been underresearched and under-developedThis article begins to conceptualize theory, research, and action for an evidence-based system for innovation support (EBSIS). EBSIS describes key priorities for strengthening the science and practice of support. The major goal of EBSIS is to enhance the research and practice of support in order to build capacity in the Delivery System for implementing innovations with quality, and thereby, help the Delivery System achieve outcomes. EBSIS is guided by a logic model that includes four key support components: tools, training, technical assistance, and quality assurance/quality improvement. EBSIS uses the Getting To Outcomes approach to accountability to aid the identification and synthesis of concepts, tools, and evidence for support. We conclude with some discussion of the current status of EBSIS and possible next steps, including the development of collaborative researcher-practitioner-funder-consumer partnerships to accelerate accumulation of knowledge on the Support System.

  5. Arrangement between the US Nuclear Regulatory Commission (USNRC) and the Belgian Government for Exchange of Technical Information in Regulatory Matters and in Cooperation in Safety Research and in Standards Development

    International Nuclear Information System (INIS)

    1978-01-01

    This Arrangement was concluded on 6 June 1978 between the United States Nuclear Regulatory Commission and the Belgian Government for exchange of technical information in regulatory matters and in co-operation in safety research and in standards development. Both Parties agree to exchange, as available, technical information related to the regulation of safety and the environmental impact of designated nuclear energy facilities and to safety research of designated types of nuclear facilities. As regards co-operation in safety research, the execution of joint programmes and projects under which activities are divided between the two Parties will be agreed on a case by case basis. The Parties further agree to co-operate in the development of regulatory standards applicable to the designated nuclear facilities. The Arrangement is valid for 5 years and may be extended. (NEA) [fr

  6. Utilization of a Technical Peer Review to Support the Mission of the Nevada Test Site Community Advisory Board

    International Nuclear Information System (INIS)

    Dixon, Earle C.; Peterson, Kathleen

    2003-01-01

    The U. S. Department of Energy's (DOE) National Nuclear Security Administration Nevada Operations Office (NNSA/NV) Environmental Management (EM) Underground Test Area (UGTA) project addresses the characterization and needs for long-term monitoring of the subsurface contamination resulting from 828 underground nuclear weapon tests at the Nevada Test Site (NTS). EM promotes, and is required, to include stakeholders in its program. However, UGTA is a very complex program not easily understood by members of the public. The NTS Community Advisory Board (CAB), a federally chartered Site Specific Advisory Board (SSAB), has studied the UGTA project since 1996, and has found it a challenge to completely comprehend and provide NNSA/NV meaningful citizen input. The CAB realized the benefit of a technical peer review and in 2000 recommended to NNSA/NV that a peer review of the UGTA strategy would provide valuable feedback to the program to address underground contamination at the NTS. N NSA agreed to the CAB's recommendation, and moved forward with a scope of work to have the American Society of Mechanical Engineers (ASME) perform the peer review of the UGTA strategy. The ASME began the peer review in June 2001, and their final report was published in November 2001. In January 2002, the CAB devoted their monthly meeting in Las Vegas, Nevada to reporting the results of the peer review of the UGTA strategy to the public. Two public workshops were later held in the community of Amargosa, Nevada during the month of January to help educate and build interest in the CAB February 2002 monthly meeting which was also held in Amargosa. The CAB recommendation to NNSA to utilize a technical peer review has provided valuable information to NNSA, the State of Nevada, and the CAB. At other DOE sites SSABs are challenged by a number of complex, technical programs requiring considerable time and resources for the board to comprehend. It is worth considering the utilization of an independent

  7. Technical support to the ER program subsurface technologies team leader. Final report, March 15, 1993--March 15, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    This research included development of a new geologic sample management facility and associated quality assurance systems for the LANL Environmental Restoration Program. Additional work with the LANL Environmental Restoration Program included the development of Sampling and Analysis Plans (SAP) for various Operable Units for the Laboratory. The PI (Davidson) served as the sample curation/sample management specialist on the ER program Subsurface Studies Technical Team. Specialization in Field Unit Data Base systems was the focus of the work towards the end of the contract. A document is included which provides the Statement of Policy for the management of borehole samples collected during environmental restoration activities at LANL.

  8. TECHNICAL COMPARISON OF CANDIDATE ION EXCHANGE MEDIA FOR SMALL COLUMN ION EXCHANGE (SCIX) APPLICATIONS IN SUPPORT OF SUPPLEMENTAL LAW PRETREATMENT

    International Nuclear Information System (INIS)

    Ramsey, A.A.; Thorson, M.R.

    2010-01-01

    At-tank supplemental pretreatment including both filtration and small column ion exchange is currently under evaluation to facilitate salt waste retrieval and processing in the Hanford tank farms. Spherical resorcinol formaldehyde (sRF) resin is the baseline ion exchange resin for use in the Waste Treatment and Immobilization Plant (WTP). This document provides background and technical rationale to assist in determining whether spherical resorcinol formaldehyde (sRF) is also the appropriate ion exchange resin for supplemental LAW pretreatment processes and compares sRF with crystalline silicotitanate (CST) as potential supplemental pretreatment ion exchange media.

  9. Technical support to the ER program subsurface technologies team leader. Final report, March 15, 1993 - March 15, 1998

    International Nuclear Information System (INIS)

    1998-01-01

    This research included development of a new geologic sample management facility and associated quality assurance systems for the LANL Environmental Restoration Program. Additional work with the LANL Environmental Restoration Program included the development of Sampling and Analysis Plans (SAP) for various Operable Units for the Laboratory. The PI (Davidson) served as the sample curation/sample management specialist on the ER program Subsurface Studies Technical Team. Specialization in Field Unit Data Base systems was the focus of the work towards the end of the contract. A document is included which provides the Statement of Policy for the management of borehole samples collected during environmental restoration activities at LANL

  10. Interim Control Strategy for the Test Area North/Technical Support Facility Sewage Treatment Facility Disposal Pond - Two-year Update

    International Nuclear Information System (INIS)

    L. V. Street

    2007-01-01

    The Idaho Cleanup Project has prepared this interim control strategy for the U.S. Department of Energy Idaho Operations Office pursuant to DOE Order 5400.5, Chapter 11.3e (1) to support continued discharges to the Test Area North/Technical Support Facility Sewage Treatment Facility Disposal Pond. In compliance with DOE Order 5400.5, a 2-year review of the Interim Control Strategy document has been completed. This submittal documents the required review of the April 2005 Interim Control Strategy. The Idaho Cleanup Project's recommendation is unchanged from the original recommendation. The Interim Control Strategy evaluates three alternatives: (1) re-route the discharge outlet to an uncontaminated area of the TSF-07; (2) construct a new discharge pond; or (3) no action based on justification for continued use. Evaluation of Alternatives 1 and 2 are based on the estimated cost and implementation timeframe weighed against either alternative's minimal increase in protection of workers, the public, and the environment. Evaluation of Alternative 3, continued use of the TSF-07 Disposal Pond under current effluent controls, is based on an analysis of four points: - Record of Decision controls will protect workers and the public - Risk of increased contamination is low - Discharge water will be eliminated in the foreseeable future - Risk of contamination spread is acceptable. The Idaho Cleanup Project recommends Alternative 3, no action other than continued implementation of existing controls and continued deactivation, decontamination, and dismantlement efforts at the Test Area North/Technical Support Facility

  11. Dose Modeling Evaluations and Technical Support Document for the Authorized Limits Request for the C-746-U Landfill at the Paducah Gaseous Diffusion Plant, Paducah, Kentucky

    International Nuclear Information System (INIS)

    Boerner, A. J.; Maldonado, D. G.; Hansen, Tom

    2012-01-01

    This report contains the technical basis in support of the DOE's derivation of Authorized Limits (ALs) for the DOE Paducah C-746-U Landfill. A complete description of the methodology, including an assessment of the input parameters, model inputs, and results is provided in this report. This report also provides initial recommendations on applying the derived soil guidelines. The ORISE-derived soil guidelines are specifically applicable to the Landfill at the end of its operational life. A suggested 'upper bound' multiple of the derived soil guidelines for individual shipments is provided

  12. Dose Modeling Evaluations and Technical Support Document for the Authorized Limits Request for the C-746-U Landfill at the Paducah Gaseous Diffusion Plant, Paducah, Kentucky

    Energy Technology Data Exchange (ETDEWEB)

    Boerner, A. J. [IEAVP, ORISE, Oak Ridge, TN (United States); Maldonado, D. G. [IEAVP, ORISE, Oak Ridge, TN (United States; Hansen, Tom [Ameriphysics, LLC (United States)

    2012-06-01

    This report contains the technical basis in support of the DOE?s derivation of Authorized Limits (ALs) for the DOE Paducah C-746-U Landfill. A complete description of the methodology, including an assessment of the input parameters, model inputs, and results is provided in this report. This report also provides initial recommendations on applying the derived soil guidelines. The ORISE-derived soil guidelines are specifically applicable to the Landfill at the end of its operational life. A suggested 'upper bound' multiple of the derived soil guidelines for individual shipments is provided.

  13. Compendium of technical computer codes used in support of the DOE Office of Civilian Radioactive Waste Management

    International Nuclear Information System (INIS)

    McBride, A.F.; Austin, P.N.; Ward, W.M.; McCarn, L.B.; Roddy, J.W.; Ludwig, S.B.; Reich, W.J.; Roussin, R.W.

    1989-04-01

    A compilation of technical computer codes related to ongoing work under the cognizance of the US Department of Energy's Office of Civilian Radioactive Waste Management (DOE/OCRWM) is presented. Much of the information was obtained from responses to a questionnaire distributed by DOE/OCRWM to all DOE offices associated with the radioactive waste management program. The codes are arranged alphabetically by name. In addition to the code description, each sheet includes other data such as computer hardware and software requirements, document references, name of respondent, and code variants. The codes are categorized into seventeen subject areas plus a miscellaneous category. Some of the subject areas covered are atmospheric dispersion, biosphere transport, geochemistry, nuclear radiation transport, nuclide inventory, and risk assessment. Three appendixes are included which list the names of the contributors, a list of the literature reviewed, and a glossary of computer code terminology and definitions. 50 refs., 3 tabs

  14. Final Report. SFAA No. DEFC02-98CH10961. Technical assistance for joint implementation and other supporting mechanisms and measures for greenhouse gas emissions mitigation

    Energy Technology Data Exchange (ETDEWEB)

    Knight, Denise

    2001-10-15

    IIEC, a division of CERF, has developed an extensive base of experience implementing activities that support climate action by developing USIJI projects in transitional countries within Asia, Latin America, Central and Eastern Europe, and southern Africa. IIEC has been able to provide a range of technical and policy assistance to governments and industry in support of sustainable energy use. IIEC continues to work in key countries with local partners to develop and implement energy efficiency policies and standards, develop site-specific projects, and assist governing bodies to establish national priorities and evaluation criteria for approving GHG-mitigation projects. As part of this project, IIEC focused on promoting a series of activities in Thailand and South Africa in order to identify GHG mitigation projects and work within the national approval process of those countries. The sections of this report outline the activities conducted in each country in order to achieve that goal.

  15. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 16. Repository preconceptual design studies: BPNL waste forms in salt

    International Nuclear Information System (INIS)

    1978-04-01

    This volume, Volume 16, ''Repository Preconceptual Design Studies: BPNL Waste Forms in Salt,'' is one of a 23 volume series, ''Technical Support for GEIS: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-36, which supplements the ''Contribution to Draft Generic Environmental Impact Statement on Commercial Waste Management: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-44. The series provide a more complete technical basis for the preconceptual designs, resource requirements, and environmental source terms associated with isolating commercial LWR wastes in underground repositories in salt, granite, shale and basalt. Wastes are considered from three fuel cycles: uranium and plutonium recycling, no recycling of spent fuel and uranium-only recycling. This document describes a preconceptual design for a nuclear waste storage facility in salt. The waste forms assumed to arrive at the repository were supplied by Battelle Pacific Northwest Laboratories (BPNL). The facility design consists of several chambers excavated deep within a geologic formation together with access shafts and supportive surface structures. The facility design provides for: receiving and unloading waste containers; lowering them down shafts to the mine level; transporting them to the proper storage area and emplacing them in mined storage rooms. Drawings of the facility design are contained in TM-36/17, ''Drawings for Repository Preconceptual Design Studies: BPNL Waste Forms in Salt.''

  16. Modelling Social Psychological Support within the System of Inclusive Higher Education: The Experience of Novosibirsk State Technical University

    Directory of Open Access Journals (Sweden)

    Osmuk L.A.

    2017-08-01

    Full Text Available The article considers the problem of modelling the specific structure of social psychological support of students with disabilities in the context of inclusive education development. The article reveals the functions, system character and means of application of this structure in the course of realization of professional and educational paths. The authors analyze different models of social psychological support in the university and address the question of the efficiency of these models and their compliance with resources and demands of the university. The problem of the optimal model is considered. The authors suggest outsourcing as a solution for universities with limited number of assistive resources and small amount of students with disabilities. Developing the model implies taking into account perceptions and assessments of social psychological support in students with disabilities in each step of their professional path.

  17. School Engagement among Urban Adolescents of Color: Does Perception of Social Support and Neighborhood Safety Really Matter?

    Science.gov (United States)

    Daly, Brian P.; Shin, Richard Q.; Thakral, Charu; Selders, Michael; Vera, Elizabeth

    2009-01-01

    In this study we examined the effects of risk factors (perceived neighborhood crime/delinquency problems, neighborhood incivilities) and protective factors (teacher support, family support, peer support) on the school engagement of 123 urban adolescents of color. Age and gender were also examined to determine if different ages (younger or older)…

  18. Improving Depression Care for Adults With Serious Mental Illness in Underresourced Areas: Community Coalitions Versus Technical Support.

    Science.gov (United States)

    Castillo, Enrico G; Shaner, Roderick; Tang, Lingqi; Chung, Bowen; Jones, Felica; Whittington, Yolanda; Miranda, Jeanne; Wells, Kenneth B

    2018-02-01

    Community Partners in Care (CPIC) was a group-randomized study of two approaches to implementing expanded collaborative depression care: Community Engagement and Planning (CEP), a coalition approach, and Resources for Services (RS), a technical assistance approach. Collaborative care networks in both arms involved health care and other agencies in five service sectors. This study examined six- and 12-month outcomes for CPIC participants with serious mental illness. This secondary analysis focused on low-income CPIC participants from racial-ethnic minority groups with serious mental illness in underresourced Los Angeles communities (N=504). Serious mental illness was defined as self-reported severe depression (≥20 on the Patient Health Questionnaire-8) at baseline or a lifetime history of bipolar disorder or psychosis. Logistic and Poisson regression with multiple imputation and response weights, controlling for covariates, was used to model intervention effects. Among CPIC participants, 50% had serious mental illness. Among those with serious mental illness, CEP relative to RS reduced the likelihood of poor mental health-related quality of life (OR=.62, 95% CI=.41-.95) but not depression (primary outcomes); reduced the likelihood of having homelessness risk factors and behavioral health hospitalizations; increased the likelihood of mental wellness; reduced specialty mental health medication and counseling visits; and increased faith-based depression visits (each pmental health-related quality of life and some social outcomes for adults with serious mental illness, although no evidence was found for long-term effects in this subsample.

  19. Support of experimental high energy physics research at the University of South Carolina. Final technical report, 1980--1992

    International Nuclear Information System (INIS)

    Childers, R.L.; Darden, C.W.; Rosenfeld, C.; Wilson, J.R.

    1992-01-01

    Twelve years of support by the US Department of Energy have turned a two man team with no equipment and no graduate students working on a single experiment into an active group of four professors, one post-doctoral research associate and three graduate students working with appropriate equipment on three major experiments and several other projects. 162 references

  20. Support of enhanced oil recovery to independent producers in Texas. Quarterly technical progress report, July 1, 1995--September 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Fotouh, K.H.

    1995-09-30

    The main objective of this project is to support independent oil producers in Texas and to improve the productivity of marginal wells utilizing enhanced oil recovery techniques. The main task carried out this quarter was the generation of an electronic data base.

  1. Do stress and support matter for caring? The role of perceived stress and social support on expressed emotion of carers of persons with first episode psychosis.

    Science.gov (United States)

    Sadath, Anvar; Muralidhar, D; Varambally, Shivarama; Gangadhar, B N; Jose, Justin P

    2017-02-01

    Caring for a person with first episode psychosis (FEP) is a challenging and distressing task for the carers. The carers' stress in the early stage of psychosis can increase their expressed emotion (EE) while social support is hypothesized to decrease EE. However, the influence of stress and social support on carers' EE is not well understood in FEP. To examine how the stress and social support shape expressed emotion in the carers of FEP. Seventy one carers of the patients with non-affective FEP were recruited from the inpatient psychiatry ward of a tertiary mental health care center in South India. The family questionnaire, perceived stress scale and multidimensional scale of perceived social support were used to measure their EE, stress and social support respectively. Carers experienced high level of perceived stress, EE and poor social support. Perceived stress significantly increased EE (β=0.834; psocial support did not significantly influence EE (β=-0.065; p>0.05). Perceived stress predicted 76 percent of the variance on EE (Adjusted R 2 =0.761). The results emphasize high level of stress and EE in carers of patients with FEP that implies the need for appropriate psychosocial interventions to manage their stress. Copyright © 2016 Elsevier B.V. All rights reserved.

  2. Provision of utility support services to the US Department of Energy San Francisco Operations Office. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-01

    The main purpose of this project was to provide to DOE/SAN continuing, follow-up support to realize savings from a number of alternate supply arrangements that had already been and/or were expected to be identified under the original project. This expected continuation of these efforts is demonstrated by certain of the tasks that are spelled out in the Statement of Work. For example: Evaluate and propose alternative options and methods for improving efficiency, reducing cost, and making effective use of the energy supplies and facilities under various conditions of use; Provide engineering and economic analysis and recommendations for utility-related facilities and service issues, such as high voltage discounts, ownership of facilities, etc.; Assist in developing strategy and documentation in support of negotiating utility contracts and modifications thereto. In addition, the follow-on contract provided for monitoring and intervening in rate cases that had particular relevance to the DOE/SAN laboratories.

  3. Technical documentation in support of the project-specific analysis for construction and operation of the National Ignition Facility

    Energy Technology Data Exchange (ETDEWEB)

    Lazaro, M.A.; Vinikour, W. [Argonne National Lab., IL (United States). Environmental Assessment Div.; Allison, T. [Argonne National Lab., IL (United States). Decision and Information Sciences Div.] [and others

    1996-09-01

    This document provides information that supports or supplements the data and impact analyses presented in the National Ignition Facility (NIF) Project-Specific Analysis (PSA). The purposes of NIF are to achieve fusion ignition in the laboratory for the first time with inertial confinement fusion (ICF) technology and to conduct high- energy-density experiments ins support of national security and civilian application. NIF is an important element in the DOE`s science-based SSM Program, a key mission of which is to ensure the reliability of the nation`s enduring stockpile of nuclear weapons. NIF would also advance the knowledge of basic and applied high-energy- density science and bring the nation a large step closer to developing fusion energy for civilian use. The NIF PSA includes evaluations of the potential environmental impacts of constructing and operating the facility at one of five candidate site and for two design options.

  4. ANL technical support program for DOE Environmental Restoration and Waste Management. Annual report, October 1991--September 1992

    Energy Technology Data Exchange (ETDEWEB)

    Bates, J.K.; Bradley, C.R.; Buck, E.C.; Cunnane, J.C.; Dietz, N.L.; Ebert, W.L.; Emery, J.W.; Feng, X.; Gerding, T.J.; Gong, M.; Hoh, J.C.; Mazer, J.J.; Wronkiewicz, D.J. [Argonne National Lab., IL (United States); Bourcier, W.L.; Morgan, L.E.; Newton, L.; Nielsen, J.K.; Phillips, B.L. [Lawrence Livermore National Lab., CA (United States); Ewing, R.C.; Wang, L. [Univ. of New Mexico, Albuquerque, NM (United States); Li, H.; Tomozawa, M. [Rensselaer Polytechnic Inst., Troy, NY (United States)

    1993-05-01

    A program was established for DOE Environmental Restoration and Waste Management (EM) to evaluate factors that are anticipated to affect waste glass reaction during repository disposal, especially in an unsaturated environment typical of what may be expected for the proposed Yucca Mountain repository site. This report covers progress in FY 1992 on the following tasks: 1. A compendium of the characteristics of high-level nuclear waste borosilicate glass has been written. 2. A critical review of important parameters that affect the reactivity of glass in an unsaturated environment is being prepared. 3. A series of tests has been started to evaluate the reactivity of fully radioactive glasses in a high-level waste repository environment and compare it to the reactivity of synthetic, nonradioactive glasses of similar composition. 4. The effect of radiation upon the durability of waste glasses at a high glass surface area-to-liquid volume (SA/V) ratio and a high gas-to-liquid volume ratio will be assessed. These tests address both vapor and high SA/V liquid conditions. 5. A series of tests is being performed to compare the extent of reaction of nuclear waste glasses at various SAN ratios. Such differences in the SAN ratio may significantly affect glass durability. 6. A series of natural analogue tests is being analyzed to demonstrate a meaningful relationship between experimental and natural alteration conditions. 7. Analytical electron microscopy (AEM), infrared spectroscopys and nuclear resonant profiling are being used to assess the glass/water reaction pathway by identifying intermediate phases that appear on the reacting glass. Additionally, colloids from the leach solutions are being studied using AEM. 8. A technical review of AEM results is being provided. 9. A study of water diffusion involving nuclear waste glasses is being performed. 10. A mechanistically based model is being developed to predict the performance of glass over repository-relevant time periods.

  5. ARRA FEMP Technical Assistance -- Federal Aviation Administration Project 209 -- Control Tower and Support Building, Palm Springs, CA

    Energy Technology Data Exchange (ETDEWEB)

    Arends, J.; Sandusky, William F.

    2010-03-31

    This report represents findings of a design review team that evaluated construction documents (at the 100% level) and operating specifications for a new control tower and support building that will be built in Palm Springs, California by the Federal Aviation Administration (FAA). The focus of the review was to identify measures that could be incorporated into the final design and operating specifications that would result in additional energy savings for the FAA that would not have otherwise occurred.

  6. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2011-01-01

    In this report we will review the main achievements of the Technical Stop and the progress of several centrally-managed projects to support CMS operation and maintenance and prepare the way for upgrades. Overview of the extended Technical Stop  The principal objectives of the extended Technical Stop affecting the detector itself were the installation of the TOTEM T1 telescopes on both ends, the readjustment of the alignment link-disk in YE-2, the replacement of the light-guide sleeves for all PMs of both HFs, and some repairs on TOTEM T2 and CASTOR. The most significant tasks were, however, concentrated on the supporting infrastructure. A detailed line-by-line leak search was performed in the C6F14 cooling system of the Tracker, followed by the installation of variable-frequency drives on the pump motors of the SS1 and SS2 tracker cooling plants to reduce pressure transients during start-up. In the electrical system, larger harmonic filters were installed in ...

  7. Interim Control Strategy for the Test Area North/Technical Support Facility Sewage Treatment Facility Disposal Pond - Two-year Update

    Energy Technology Data Exchange (ETDEWEB)

    L. V. Street

    2007-04-01

    The Idaho Cleanup Project has prepared this interim control strategy for the U.S. Department of Energy Idaho Operations Office pursuant to DOE Order 5400.5, Chapter 11.3e (1) to support continued discharges to the Test Area North/Technical Support Facility Sewage Treatment Facility Disposal Pond. In compliance with DOE Order 5400.5, a 2-year review of the Interim Control Strategy document has been completed. This submittal documents the required review of the April 2005 Interim Control Strategy. The Idaho Cleanup Project's recommendation is unchanged from the original recommendation. The Interim Control Strategy evaluates three alternatives: (1) re-route the discharge outlet to an uncontaminated area of the TSF-07; (2) construct a new discharge pond; or (3) no action based on justification for continued use. Evaluation of Alternatives 1 and 2 are based on the estimated cost and implementation timeframe weighed against either alternative's minimal increase in protection of workers, the public, and the environment. Evaluation of Alternative 3, continued use of the TSF-07 Disposal Pond under current effluent controls, is based on an analysis of four points: - Record of Decision controls will protect workers and the public - Risk of increased contamination is low - Discharge water will be eliminated in the foreseeable future - Risk of contamination spread is acceptable. The Idaho Cleanup Project recommends Alternative 3, no action other than continued implementation of existing controls and continued deactivation, decontamination, and dismantlement efforts at the Test Area North/Technical Support Facility.

  8. Dissolved organic matter and lake metabolism: Biogeochemistry and controls of nutrient flux dynamics in lakes: Technical progress report, 1 July 1986-30 June 1987

    International Nuclear Information System (INIS)

    Wetzel, R.G.

    1987-01-01

    Most lakes are small and possess large littoral and wetland components in the interface region between the open water per se and the drainage basin. Not only does the photosynthetic productivity of the surrounding littoral-wetland complex vastly exceed that of the pelagic zone, but the littoral-wetland vegetation and its intensive synthesis and decompositional metabolism regulate loading of inorganic nutrients passing to the open water (functioning as pulsed sources and sinks), and regulate loading of dissolved organic matter and particulate organic matter to the recipient open water, which by numerous complex pathways and mechanisms enhance or suppress pelagic productivity. Research emphasis was placed on the sources, fates, and interactions of dissolved and particulate organic matter in relation to inorganic chemical cycling: allochthonous loading to the lake system; and the coupled nutrient physiology and metabolism of phytoplankton, bacterial populations, macrophytes and attendant sessile algal-bacterial communities. Regulatory mechanisms of growth and rates of carbon and nutrient cycling were evaluated among the inorganic-organic influxes of allochthonous sources as they are controlled by wetland-littoral communities, the littoral photosynthetic producer-decomposer complex, the microflora of the sediment-water interface, and the microflora of the pelagic zone. 28 refs., 13 figs., 2 tabs

  9. Does technique matter; a pilot study exploring weighting techniques for a multi-criteria decision support framework

    NARCIS (Netherlands)

    van Til, Janine Astrid; Groothuis-Oudshoorn, Catharina Gerarda Maria; Lieferink, Marijke; Dolan, James; Goetghebeur, Mireille

    2014-01-01

    Background There is an increased interest in the use of multi-criteria decision analysis (MCDA) to support regulatory and reimbursement decision making. The EVIDEM framework was developed to provide pragmatic multi-criteria decision support in health care, to estimate the value of healthcare

  10. Pre-shipment preparations at the Savannah River Site - WSRC's technical basis to support DOE's approval to ship

    International Nuclear Information System (INIS)

    Thomas, Jay E.; Bickley, Donald W.; Conatser, E. Ray

    2000-01-01

    Store', to provide a disciplined method for ensuring that all of the pre-shipment receipt preparations have been completed. This paper will provide a detailed description of each of the pre-shipment process steps WSRC performs to produce the technical basis for approving the receipt and storage of spent nuclear fuel at the Savannah River Site. It is intended to be a guide to reactor operators who plan on returning 'U.S. origin' SNF and to emphasize the need for accurate and timely completion of pre-shipment activities. (author)

  11. Nuclear fuel behaviour modelling at high burnup and its experimental support. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2001-07-01

    The Technical Committee Meeting (TCM) included separate sessions on the specific topics of fuel thermal performance and fission product retention. On thermal performance, it is apparent that the capability exists to measure conductivity in high burnup fuel either by out-of-pile measurement or by instrumentation of test reactor rods. State-of-the-art modelling codes contain models for the conductivity degradation process, and hence adequate predictions of fuel temperature are achievable. Concerning fission product release, it is clear that many groups around the world are actively investigating the subject, with experimental and modelling programmes being pursued. However, a general consensus on the exact mechanisms of gas release and related gas bubble swelling has yet to emerge, even at medium burnup levels. Fission gas phenomena, not only the release to open volumes, but the whole sequence of processes taking place prior to this, need to be modelled in any modern fuel performance code. The presence of gaseous fission products may generate rapid fuel swelling during power transients, and this can cause PCI and rod failure. At high burnups, the quantity of released gases could give rise to pressures exceeding the safe limits. Modelling of pellet-cladding interaction (PCI) effects during transient operation is also an active area of study for many groups. In some situations a purely empirical approach to failure modelling can be justified, while for other applications a more detailed mechanistic approach is required. Another aspect of cladding modelling which was featured at the TCM concerned corrosion and hydriding. Although this issue can be the main life-limiting factor on fuel duty, it is apparent that modelling methods, and the experimental measurement techniques that underpin them, are adequate. A session was included on MOX fuel modelling. Substantial programmes of work, especially by the MOX vendors, appear to be underway to bring the level of understanding

  12. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 12. Repository preconceptual design studies: shale

    International Nuclear Information System (INIS)

    1978-04-01

    This document describes a preconceptual design for a nuclear waste storage facility in shale. The facility design consists of several chambers excavated deep within a geologic formation together with access shafts and supportive surface structures. The facility design provides for: receiving and unloading waste containers; lowering them down shafts to the mine level; transporting them to the proper storage area, and emplacing them in mined storage rooms. Drawings of the facility design are contained in TM-36/13, ''Drawings for Repository Preconceptual Design Studies: Shale.''

  13. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 14. Repository preconceptual design studies: basalt

    International Nuclear Information System (INIS)

    1978-04-01

    This document describes a preconceptual design for a nuclear waste storage facility in basalt. The facility design consists of several chambers excavated deep within a geologic formation together with access shafts and supportive surface structures. The facility design provides for: receiving and unloading waste containers; lowering them down shafts to the mine level; transporting them to the proper storage area and emplacing them in mined storage rooms. Drawings of the facility design are contained in TM-36/15, ''Drawings for Repository Preconceptual Design Studies: Basalt.''

  14. Strengthening government management capacity to scale up HIV prevention programs through the use of Technical Support Units: lessons from Karnataka state, India

    Science.gov (United States)

    Sgaier, Sema K; Anthony, John; Bhattacharjee, Parinita; Baer, James; Malve, Vidyacharan; Bhalla, Aparajita; Hugar, Vijaykumar S

    2014-01-01

    ABSTRACT Scaling up HIV prevention programming among key populations (female sex workers and men who have sex with men) has been a central strategy of the Government of India. However, state governments have lacked the technical and managerial capacity to oversee and scale up interventions or to absorb donor-funded programs. In response, the national government contracted Technical Support Units (TSUs), teams with expertise from the private and nongovernmental sectors, to collaborate with and assist state governments. In 2008, a TSU was established in Karnataka, one of 6 Indian states with the highest HIV prevalence in the country and where monitoring showed that its prevention programs were reaching only 5% of key populations. The TSU provided support to the state in 5 key areas: assisting in strategic planning, rolling out a comprehensive monitoring and evaluation system, providing supportive supervision to intervention units, facilitating training, and assisting with information, education, and communication activities. This collaborative management model helped to increase capacity of the state, enabling it to take over funding and oversight of HIV prevention programs previously funded through donors. With the combined efforts of the TSU and the state government, the number of intervention units statewide increased from 40 to 126 between 2009 and 2013. Monthly contacts with female sex workers increased from 5% in 2008 to 88% in 2012, and with men who have sex with men, from 36% in 2009 to 81% in 2012. There were also increases in the proportion of both populations who visited HIV testing and counseling centers (from 3% to 47% among female sex workers and from 6% to 33% among men who have sex with men) and sexually transmitted infection clinics (from 4% to 75% among female sex workers and from 7% to 67% among men who have sex with men). Changes in sexual behaviors among key populations were also documented. For example, between 2008 and 2010, the proportion of

  15. Demonstration of shield-type longwall supports at York Canyon Mine of Kaiser Steel Corporation. Final technical report A

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence, R.G.; King, R.

    1980-04-01

    This report represents work on a program that was originated by the USBM of the Department of the Interior and was transferred to the Department of Energy on October 1, 1977. A demonstration with the Government funded Hemscheidt 320 HSL caliper type shield supports was conducted at three longwall panels of Kaiser Steel Corporation's York Canyon Mine. The purpose of this longwall demonstration was to provide the US coal industry with information on all aspects of shield longwall mining in high seams. The demonstration provided a working model for the coal industry and during the project, 350 people from the industry, schools, and government agencies visited the demonstration. They were provided with a first hand knowledge of a working shield longwall. The demonstration showed that the control of large coal lumps may be a problem in the mining of coal seam thicker than 8 feet. Mining with shield type supports provided good working conditions and a safe working environment. The shield requires very little maintenance and has a high mechanical availability.

  16. Data base on operator support systems (OSSDB) in nuclear power plants: Status evaluation. Technical report. Working material

    International Nuclear Information System (INIS)

    1996-01-01

    In 1991 the IAEA Committee for Contractual Scientific Services approved the Co-ordinated Research Programme on Operator Support Systems in Nuclear Power Plants in the framework of the Project ''Man-Machine Interface Studies''. The major goal of the co-ordinated research programmes was to supply guidance and technology transfer in the development and implementation of computerized support systems. Several sub-gals were identified to accomplish the first steps necessary to achieve this overall goal. Among others, creation of a databased containing the most pertinent characteristics of the OSSs operating in NPPs was recommended. The database is assumed to be of use to several groups of organizations. It therefore contains a large set of data on each specific OSS record. In this report an attempt was made to analyse the available data from the point of view of different user groups in order to guide the use as directly as possible into a practical use of the database. It is assumed that the reader on beforehand has made himself familiar with the main features of the database by reading the Users Guide, which is included in the Appendix 2 of the report. Figs, tabs

  17. Energy Flexibility from Large Prosumers to Support Distribution System Operation—A Technical and Legal Case Study on the Amsterdam ArenA Stadium

    Directory of Open Access Journals (Sweden)

    Dirk Kuiken

    2018-01-01

    Full Text Available To deal with the rising integration of stochastic renewables and energy intensive distributed energy resources (DER to the electricity network, alternatives to expensive network reinforcements are increasingly needed. An alternative solution often under consideration is integrating flexibility from the consumer side to system management. However, such a solution needs to be contemplated from different angles before it can be implemented in practice. To this end, this article considers a case study of the Amsterdam ArenA stadium and its surrounding network where flexibility is expected to be available to support the network in the future. The article studies the technical aspects of using this flexibility to determine to what extent, despite the different, orthogonal goals, the available flexibility can be used by various stakeholders in scenarios with a large load from electric vehicle charging points. Furthermore, a legal study is performed to determine the feasibility of the technical solutions proposed by analysing current European Union (EU and Dutch law and focusing on the current agreements existing between the parties involved. The article shows that flexibility in the network provided by Amsterdam ArenA is able to significantly increase the number of charging points the network can accommodate. Nonetheless, while several uses of flexibility are feasible under current law, the use of flexibility provided by electric vehicles specifically faces several legal challenges in current arrangements.

  18. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 2. Commercial waste forms, packaging and projections for preconceptual repository design studies

    International Nuclear Information System (INIS)

    1978-04-01

    This volume, Y/OWI/TM-36/2, ''Commercial Waste Forms, Packaging and Projections for Preconceptual Repository Design Studies,'' is one of a 23-volume series, ''Technical Support for GEIS: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-36, which supplements the ''Contribution to Draft Generic Environmental Impact Statement on Commercial Waste Management: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-44. The series provides a more complete technical basis for the preconceptual designs, resource requirements, and environmental source terms associated with isolating commercial LWR wastes in underground repositories in salt, granite, shale and basalt. Wastes are considered from three fuel cycles: uranium and plutonium recycling, no recycling of spent fuel and uranium-only recycling. This volume contains the data base for waste forms, packages, and projections from the commercial waste defined by the Office of Waste Isolation in ''Nuclear Waste Projections and Source Term Data for FY 1977,'' Y/OWI/TM-34. Also, as an alternative data base for repository design and analysis, waste forms, packages, and projections for commercial waste defined by Battelle Pacific Northwest Laboratory (BPNL) have been included. This data base consists of a reference case for use in the alternative design study and a definition of combustible wastes for use in mine fire and hydrogen generation analyses

  19. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 2. Commercial waste forms, packaging and projections for preconceptual repository design studies

    Energy Technology Data Exchange (ETDEWEB)

    1978-04-01

    This volume, Y/OWI/TM-36/2, ''Commercial Waste Forms, Packaging and Projections for Preconceptual Repository Design Studies,'' is one of a 23-volume series, ''Technical Support for GEIS: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-36, which supplements the ''Contribution to Draft Generic Environmental Impact Statement on Commercial Waste Management: Radioactive Waste Isolation in Geologic Formations,'' Y/OWI/TM-44. The series provides a more complete technical basis for the preconceptual designs, resource requirements, and environmental source terms associated with isolating commercial LWR wastes in underground repositories in salt, granite, shale and basalt. Wastes are considered from three fuel cycles: uranium and plutonium recycling, no recycling of spent fuel and uranium-only recycling. This volume contains the data base for waste forms, packages, and projections from the commercial waste defined by the Office of Waste Isolation in ''Nuclear Waste Projections and Source Term Data for FY 1977,'' Y/OWI/TM-34. Also, as an alternative data base for repository design and analysis, waste forms, packages, and projections for commercial waste defined by Battelle Pacific Northwest Laboratory (BPNL) have been included. This data base consists of a reference case for use in the alternative design study and a definition of combustible wastes for use in mine fire and hydrogen generation analyses.

  20. 78 FR 27963 - Reliability Technical Conference; Notice of Technical Conference

    Science.gov (United States)

    2013-05-13

    ... Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, July 9, 2013 from 9:00 a.m. to 5:00 p.m. This... technical support for webcasts and offers the option of listening to the meeting via phone-bridge for a fee...

  1. Support of experimental high energy physics research at the University of South Carolina. Final technical report, February 1992 - February 1996

    International Nuclear Information System (INIS)

    Purohit, M.V.; Rosenfeld, C.; Wilson, J.R.

    1996-01-01

    This brief report summarizes the activities of the University of South Carolina's high energy physics group during the three-year period. The activities of the group began in 1980 under a predecessor grant from DOE, and continue today under a successor grant. The retirements of one grant in favor of another were for reasons of administrative convenience or necessity. The characterization of the report as final is not reflective of the group's projects, which by-and-large continue with support from the successor grant. The experiments with which the USC group had some significant relationship during the period of this grant were ARGUS (at DESY's DORIS e + e - collider), AMY (at KEK's TRISTAN e + e - collider). Fermilab E687, Fermilab E789, Fermilab E791, Fermilab E803, and Fermilab E872. The authors give a brief synopsis of USC's participation in each of these projects and a few projects of lesser magnitude as well

  2. The Brazilian psychiatric reform: historical and technical-supportive aspects of experiences carried out in the cities of São Paulo, Santos and Campinas

    Directory of Open Access Journals (Sweden)

    Cristina Amélia Luzio

    2007-01-01

    Full Text Available The Brazilian psychiatric reform: historical and technical-supportive aspects of experiences carried out in the cities of São Paulo (capital, Santos and Campinas, in order to understand their material, social and political impacts, the progress in the process of breaking away from the psychiatric ward model, and the establishment of creative and productive groups, required to build up the psychosocial treatment in regard to mental health, as well as to evaluate the contribution that the SUS (Brazilian Public Health System had on the psychiatric reform in the mentioned cities. The research, which is the basis of this paper, is part of a thesis regarding mental health care, whereby the innovative projects implemented in those cities served as framework and basis for comparison to analyze mental health policy in small and medium-sized cities and towns in the state of São Paulo.

  3. Characteristics of mineral nutrition of plants in the bio-technical life support system with human wastes included in mass exchange

    Science.gov (United States)

    Tikhomirova, Natalia; Ushakova, Sofya; Kalacheva, Galina; Tikhomirov, Alexander

    2016-09-01

    The study addresses the effectiveness of using ion exchange substrates (IES) to optimize mineral nutrition of plants grown in the nutrient solutions containing oxidized human wastes for application in bio-technical life support systems. The study shows that the addition of IES to the root-inhabited substrate is favorable for the growth of wheat vegetative organs but causes a decrease in the grain yield. By contrast, the addition of IES to the nutrient solution does not influence the growth of vegetative organs but favors normal development of wheat reproductive organs. Thus, to choose the proper method of adjusting the solution with IES, one should take into account specific parameters of plant growth and development and the possibility of multiple recycling of IES based on the liquid products of mineralization of human wastes.

  4. Licensing of safety critical software for nuclear reactors - Common position of seven European nuclear regulators and authorised technical support organisations - Revision 2013

    International Nuclear Information System (INIS)

    2013-01-01

    This report is the 5th revision of the report. The task force was formed in 1994 as a group of experts on safety critical software. The members come from regulatory authorities and/or their technical support organization. Bo Liwaang, SSM, has been a member since the work started in 1994. For full information of the historical background, previous revisions of the report and objectives, see the Introduction of the report. The conclusions and viewpoints presented in the report are those of the authors and do not necessarily coincide with those of the SSM. The report, without the SSM cover and this page, will be published by or available at the websites of the other participating organizations. Effect on SSM supervisory and regulatory task: The effect of the report is high as it presents a common view on important issues by experts from seven European regulatory organizations, even though the report is not a regulation or guide

  5. Technical support for an enabling policy framework for carbon dioxide capture and geological storage. Task 3. Incentivising CO2 capture and storage in the EU

    International Nuclear Information System (INIS)

    De Coninck, H.; Groenenberg, H.

    2007-03-01

    To date CO2 capture and storage (CCS) is not deployed at a commercial scale, and a range of policy instruments could be used to provide adequate incentives for large scale deployment of CCS in the European Union. Five groups of incentives are discussed: (1) the EU Emissions Trading Scheme (weak and strong version); (2) Member-State-based public financial support through investment support, feed-in subsidies or a CO2 price guarantee; (3) an EU-level low-carbon portfolio standard with tradable certificates; (4) an EU-wide CCS obligation for all new fossil-fuel-based power capacity, and (5) public-private partnerships for realizing a CO2 pipeline infrastructure. The nature of the policy, mainly in case the scale of the instrument matters and much public financial is involved, determines whether it will be implemented by the EU or at the Member-State level. Support for CCS projects at the Member-State level, however, will require amendment of the Community Guidelines for State Aid for Environmental Protection

  6. Underground openings in clay formations - Technical requirements on drifting technology and support systems for underground openings and their impact on retreat systems for the installation of engineered barriers

    International Nuclear Information System (INIS)

    Mischo, Helmut

    2012-01-01

    well as the development of adapted mining and excavation methods. Other fields which have to be considered are the special requirements on the suitable support technology and systems, the necessary support installation technology and also time requirements. Most of these special requirements can also be applied to the excavation of large-scale underground openings in mud-stone and can thus provide additional information for the design and development of underground repositories in clay formations. While most information can be transferred directly from commercial mining to the excavation of a repository, there are some areas where the available data only provides some sort of basic information. One example for this is the fact that the retreat from old workings and the sealing of drifts and tunnels already requires a highly developed and adopted technology in normal clay mining operations. For the successful long-term sealing of a repository, However, the immediate expansion of the pre-stressed clay after the extraction of support units and the simultaneously starting creeping requests an even more sophisticated dam construction technology for the refinement of radioactive waste to guarantee highest quality of the dam itself. This has to include, amongst other things, excellent bonding between construction material and host rock to ensure lowest possible leakage. This paper gives a detailed overview of the technical and technological methods currently used in clay mining and the significant differences to all other types of mining operations. For each stage of the technical construction process of underground openings in clay formations it highlights the information that could be transferred to the construction of this type of underground repositories. It also shows some of the areas where the database is still limited or incomplete and thus where further research and development work is necessary for a successful technical solution for radioactive waste confinement in

  7. Health and safety matters! Associations between organizational practices and personal support workers' life and work stress in Ontario, Canada.

    Science.gov (United States)

    Zeytinoglu, Isik U; Denton, Margaret; Brookman, Catherine; Davies, Sharon; Sayin, Firat K

    2017-06-21

    The home and community care sector is one of the fastest growing sectors globally and most prominently in mature industrialized countries. Personal support workers (PSWs) are the largest occupational group in the sector. This paper focuses on the emotional health of PSWs working in the home and community care sector in Ontario, Canada. The purpose of this paper is to present evidence on the associations between PSWs' life and work stress and organizational practices of full-time and guaranteed hours, and PSWs' perceptions of support at work and preference for hours. Data come from our 2015 survey of 1543 PSWs. Dependent variables are life and work stress. Independent variables are: objective organizational practices of full-time and guaranteed hours, and subjective organizational practices of perceived support at work, and preferred hours of work. Descriptive statistics, correlations and ordinary least square regression analyses with collinearity tests are conducted. Organizational practices of employing PSWs in full-time or guaranteed hours are not associated with their life and work stress. However, those who perceive support from their organizations are also the ones reporting lower life and work stress. In addition, those PSWs perceiving support from their supervisor report lower work stress. PSWs would like to work in their preferred hours, and those who prefer to work more hours report lower life and work stress, and conversely, those who prefer to work less hours report life and work stress. For PSWs in home and community care, perceived support from their organizations and supervisors, and employment in preferred hours are important factors related to their life and work stress.

  8. Does It Matter Who Participates in Our Studies?: A Caution when Interpreting the Research on Positive Behavioral Support

    Science.gov (United States)

    Durand, V. Mark; Rost, Nichole

    2005-01-01

    Research on the treatment of challenging behaviors such as aggression, tantrums, and self-injury expanded significantly over the past two decades. However, despite of the rather impressive numbers of studies, it is still uncertain whether positive behavioral support (PBS) is effective with everyone. To be able to tell family members and…

  9. PNNL Technical Support to The Implementation of EMTA and EMTA-NLA Models in Autodesk® Moldflow® Packages

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Ba Nghiep; Wang, Jin

    2012-12-01

    Under the Predictive Engineering effort, PNNL developed linear and nonlinear property prediction models for long-fiber thermoplastics (LFTs). These models were implemented in PNNL’s EMTA and EMTA-NLA codes. While EMTA is a standalone software for the computation of the composites thermoelastic properties, EMTA-NLA presents a series of nonlinear models implemented in ABAQUS® via user subroutines for structural analyses. In all these models, it is assumed that the fibers are linear elastic while the matrix material can exhibit a linear or typical nonlinear behavior depending on the loading prescribed to the composite. The key idea is to model the constitutive behavior of the matrix material and then to use an Eshelby-Mori-Tanaka approach (EMTA) combined with numerical techniques for fiber length and orientation distributions to determine the behavior of the as-formed composite. The basic property prediction models of EMTA and EMTA-NLA have been subject for implementation in the Autodesk® Moldflow® software packages. These models are the elastic stiffness model accounting for fiber length and orientation distributions, the fiber/matrix interface debonding model, and the elastic-plastic models. The PNNL elastic-plastic models for LFTs describes the composite nonlinear stress-strain response up to failure by an elastic-plastic formulation associated with either a micromechanical criterion to predict failure or a continuum damage mechanics formulation coupling damage to plasticity. All the models account for fiber length and orientation distributions as well as fiber/matrix debonding that can occur at any stage of loading. In an effort to transfer the technologies developed under the Predictive Engineering project to the American automotive and plastics industries, PNNL has obtained the approval of the DOE Office of Vehicle Technologies to provide Autodesk, Inc. with the technical support for the implementation of the basic property prediction models of EMTA and

  10. Comprehensive Technical Support for High-Quality Anthracite Production: A Case Study in the Xinqiao Coal Mine, Yongxia Mining Area, China

    Directory of Open Access Journals (Sweden)

    Wei Zhang

    2015-12-01

    Full Text Available The effective production of high-quality anthracite has attracted increasing global attention. Based on the coal occurrence in Yongxia Mining Area and mining conditions of a coalface in Xinqiao Coal Mine, we proposed a systematic study on the technical support for the production of high-quality anthracite. Six key steps were explored, including coal falling at the coalface, transport, underground bunker storage, main shaft hoisting, coal preparation on the ground, and railway wagon loading. The study resulted in optimized running parameters for the shearers, and the rotating patterns of the shearer drums was altered (one-way cutting was employed. Mining height and roof supporting intensity were reduced. Besides, loose presplitting millisecond blasting and mechanized mining were applied to upgrade the coal quantity and the lump coal production rate. Additionally, the coalface end transloading, coalface crush, transport systems, underground storage, and main shaft skip unloading processes were improved, and fragmentation-prevention techniques were used in the washing and railway wagon loading processes. As a result, the lump coal production rate was maintained at a high level and fragmentation was significantly reduced. Because of using the parameters and techniques determined in this research, high-quality coal production and increased profits were achieved. The research results could provide theoretical guidance and methodology for other anthracite production bases.

  11. Independent technical support for the frozen soil barrier installation and operation at the Fukushima Daiichi Nuclear Power Station (F1 Site)

    Energy Technology Data Exchange (ETDEWEB)

    Looney, Brian B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Jackson, Dennis G. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Truex, Michael J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Johnson, Christian D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-02-23

    TEPCO is implementing a number of water countermeasures to limit the releases and impacts of contaminated water to the surrounding environment. The diverse countermeasures work together in an integrated manner to provide different types, and several levels, of protection. In general, the strategy represents a comprehensive example of a “defense in depth” concept that is used for nuclear facilities around the world. One of the key countermeasures is a frozen soil barrier encircling the damaged reactor facilities. The frozen barrier is intended to limit the flow of water into the area and provide TEPCO the ability to reduce the amount of contaminated water that requires treatment and storage. The National Laboratory team supports the selection of artificial ground freezing and the incorporation of the frozen soil barrier in the contaminated water countermeasures -- the technical characteristics of a frozen barrier are relatively well suited to the Fukushima-specific conditions and the need for inflow reduction. Further, our independent review generally supports the TEPCO/Kajima design, installation strategy and operation plan.

  12. High temperature turbine technology program. Phase II. Technology test and support studies. Annual technical progress report, January 1, 1979-December 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    Work performed on the High Temperature Turbine Technology Program, Phase II - Technology Test and Support Studies during the period from January 1, 1979 through December 31, 1979 is summarized. Objectives of the program elements as well as technical progress and problems encountered during this Phase II annual reporting period are presented. Progress on design, fabrication and checkout of test facilities and test rigs is described. LP turbine cascade tests were concluded. 350 hours of testing were conducted on the LP rig engine first with clean distillate fuel and then with fly ash particulates injected into the hot gas stream. Design and fabrication of the turbine spool technology rig components are described. TSTR 60/sup 0/ sector combustor rig fabrication and testing are reviewed. Progress in the design and fabrication of TSTR cascade rig components for operation on both distillate fuel and low Btu gas is described. The new coal-derived gaseous fuel synthesizing facility is reviewed. Results and future plans for the supporting metallurgical programs are discussed.

  13. Association of depressive symptomology and psychological trauma with diabetes control among older American Indian women: Does social support matter?

    Science.gov (United States)

    Goins, R Turner; Noonan, Carolyn; Gonzales, Kelly; Winchester, Blythe; Bradley, Vickie L

    2017-04-01

    Among older American Indian women with type 2 diabetes (T2DM), we examined the association between mental health and T2DM control and if social support modifies the association. Survey data were linked to T2DM medical record information. Mental health measures were the Center for Epidemiologic Studies - Depression Scale and the National Anxiety Disorders Screening Day instrument. T2DM control was all HbA1c values taken post mental health measures. There was not a significant association between depressive symptomatology and higher HbA1c although increased depressive symptomatology was associated with higher HbA1c values among participants with low social support. There was a significant association between psychological trauma and higher HbA1c values 12months [mean 7.5, 95% CI 7.0-8.0 for no trauma vs. mean 7.0, 95% CI 6.3-7.6 for trauma with no symptoms vs. mean 8.4, 95% CI 7.7-9.1 for trauma with ≥1 symptom(s)] and 6months later [mean 7.2, 95% CI 6.7-7.7 for no trauma vs. mean HbA1c 6.8, 95% CI 6.2-7.4 for trauma with no symptoms vs. mean 8.4, 95% CI 7.6-9.2 for trauma with ≥1 symptom(s)]. High social support attenuated the association between psychological trauma and HbA1c values. T2DM programs may consider activities that would strengthen participants' social support and thereby building on an intrinsic community strength. Copyright © 2017 Elsevier Inc. All rights reserved.

  14. Does technique matter; a pilot study exploring weighting techniques for a multi-criteria decision support framework.

    Science.gov (United States)

    van Til, Janine; Groothuis-Oudshoorn, Catharina; Lieferink, Marijke; Dolan, James; Goetghebeur, Mireille

    2014-01-01

    There is an increased interest in the use of multi-criteria decision analysis (MCDA) to support regulatory and reimbursement decision making. The EVIDEM framework was developed to provide pragmatic multi-criteria decision support in health care, to estimate the value of healthcare interventions, and to aid in priority-setting. The objectives of this study were to test 1) the influence of different weighting techniques on the overall outcome of an MCDA exercise, 2) the discriminative power in weighting different criteria of such techniques, and 3) whether different techniques result in similar weights in weighting the criteria set proposed by the EVIDEM framework. A sample of 60 Dutch and Canadian students participated in the study. Each student used an online survey to provide weights for 14 criteria with two different techniques: a five-point rating scale and one of the following techniques selected randomly: ranking, point allocation, pairwise comparison and best worst scaling. The results of this study indicate that there is no effect of differences in weights on value estimates at the group level. On an individual level, considerable differences in criteria weights and rank order occur as a result of the weight elicitation method used, and the ability of different techniques to discriminate in criteria importance. Of the five techniques tested, the pair-wise comparison of criteria has the highest ability to discriminate in weights when fourteen criteria are compared. When weights are intended to support group decisions, the choice of elicitation technique has negligible impact on criteria weights and the overall value of an innovation. However, when weights are used to support individual decisions, the choice of elicitation technique influences outcome and studies that use dissimilar techniques cannot be easily compared. Weight elicitation through pairwise comparison of criteria is preferred when taking into account its superior ability to discriminate between

  15. Association of depressive symptomology and psychological trauma with diabetes control among older American Indian women: Does social support matter?

    Science.gov (United States)

    Noonan, Carolyn; Gonzales, Kelly; Winchester, Blythe; Bradley, Vickie L.

    2017-01-01

    Aims Among older American Indian women with type 2 diabetes (T2DM), we examined the association between mental health and T2DM control and if social support modifies the association. Methods Survey data were linked to T2DM medical record information. Mental health measures were the Center for Epidemiologic Studies – Depression Scale and the National Anxiety Disorders Screening Day instrument. T2DM control was all HbA1c values taken post mental health measures. Results There was not a significant association between depressive symptomatology and higher HbA1c although increased depressive symptomatology was associated with higher HbA1c values among participants with low social support. There was a significant association between psychological trauma and higher HbA1c values 12 months [mean 7.5, 95% CI 7.0–8.0 for no trauma vs. mean 7.0, 95% CI 6.3–7.6 for trauma with no symptoms vs. mean 8.4, 95% CI 7.7–9.1 for trauma with =1 symptom(s)] and 6 months later [mean 7.2, 95% CI 6.7–7.7 for no trauma vs. mean HbA1c 6.8, 95% CI 6.2–7.4 for trauma with no symptoms vs. mean 8.4, 95% CI 7.6–9.2 for trauma with ≥1 symptom(s)]. High social support attenuated the association between psychological trauma and HbA1c values. Conclusions T2DM programs may consider activities that would strengthen participants’ social support and thereby building on an intrinsic community strength. PMID:28161383

  16. Technical presentation

    CERN Multimedia

    GS Department

    2010-01-01

    10 March 2010 DYNEOS 10:00 – 12:00 - Main Building, Room B, 61-1-009 Dyneos AG is active in the fields of photonics, laser and high-precision positioning. Our highly qualified engineer team has more than 30 years of experience in electro-optical solutions sales. The engineers are supported by a technical and administrative team. We are focused on the Swiss market and represent six suppliers (Coherent, PI Physik Instrumente, SIOS, Nanonics Imaging, APE, Ekspla) in order to give a qualified sales and service support to our customers. Our products are dedicated to the research field as well as to industry. In addition to standard catalog products, we offer custom designs to fulfill the specific needs of OEM customers or specific applications.

  17. Technical support document: Energy conservation standards for consumer products: Dishwashers, clothes washers, and clothes dryers including: Environmental impacts; regulatory impact analysis

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-01

    The Energy Policy and Conservation Act as amended (P.L. 94-163), establishes energy conservation standards for 12 of the 13 types of consumer products specifically covered by the Act. The legislation requires the Department of Energy (DOE) to consider new or amended standards for these and other types of products at specified times. This Technical Support Document presents the methodology, data and results from the analysis of the energy and economic impacts of standards on dishwashers, clothes washers, and clothes dryers. The economic impact analysis is performed in five major areas: An Engineering Analysis, which establishes technical feasibility and product attributes including costs of design options to improve appliance efficiency. A Consumer Analysis at two levels: national aggregate impacts, and impacts on individuals. The national aggregate impacts include forecasts of appliance sales, efficiencies, energy use, and consumer expenditures. The individual impacts are analyzed by Life-Cycle Cost (LCC), Payback Periods, and Cost of Conserved Energy (CCE), which evaluate the savings in operating expenses relative to increases in purchase price; A Manufacturer Analysis, which provides an estimate of manufacturers' response to the proposed standards. Their response is quantified by changes in several measures of financial performance for a firm. An Industry Impact Analysis shows financial and competitive impacts on the appliance industry. A Utility Analysis that measures the impacts of the altered energy-consumption patterns on electric utilities. A Environmental Effects analysis, which estimates changes in emissions of carbon dioxide, sulfur oxides, and nitrogen oxides, due to reduced energy consumption in the home and at the power plant. A Regulatory Impact Analysis collects the results of all the analyses into the net benefits and costs from a national perspective. 47 figs., 171 tabs. (JF)

  18. Technical Assistance Needs Assessments (TANAs)

    Science.gov (United States)

    The Technical Assistance Needs Assessment (TANA) is a process to identify whether a community requires additional support from EPA in order to understand technical information and have meaningful participation in the Superfund decision-making process.

  19. Final Technical Report for Year 5 Early Career Research Project "Viscosity and equation of state of hot and dense QCD matter"

    Energy Technology Data Exchange (ETDEWEB)

    Molnar, Denes [Purdue Univ., West Lafayette, IN (United States)

    2016-05-25

    The Section below summarizes research activities and achievements during the fifth (last) year of the PI’s Early Career Research Project (ECRP). Unlike the first four years of the project, the last year was not funded under the American Recovery and Reinvestment Act (ARRA). The ECRP advanced two main areas: i) radiative 3 ↔ 2 radiative transport, via development of a new computer code MPC/Grid that solves the Boltzmann transport equation in full 6+1D (3X+3V+time); and ii) application of relativistic hydrodynamics, via development of a self-consistent framework to convert viscous fluids to particles. In Year 5 we finalized thermalization studies with radiative gg ↔ ggg transport (Sec. 1.1.1) and used nonlinear covariant transport to assess the accuracy of fluid-to-particle conversion models (Sec. 1.1.2), calculated observables with self-consistent fluid-to-particle conversion from realistic viscous hydrodynamic evolution (Secs. 1.2.1 and 1.2.2), extended the covariant energy loss formulation to heavy quarks (Sec. 1.4.1) and studied energy loss in small systems (Sec. 1.4.2), and also investigated how much of the elliptic flow could have non-hydrodynamic origin (Sec 1.3). Years 1-4 of the ECRP were ARRA-funded and, therefore, they have their own report document ’Final Technical Report for Years 1-4 of the Early Career Research Project “Viscosity and equation of state of hot and dense QCD matter”’ (same award number DE-SC0004035). The PI’s group was also part of the DOE JET Topical Collaboration, a multi-institution project that overlapped in time significantly with the ECRP. Purdue achievements as part of the JET Top- ical Collaboration are in a separate report “Final Technical Report summarizing Purdue research activities as part of the DOE JET Topical Collaboration” (award DE-SC0004077).

  20. Key principles for a national clinical decision support knowledge sharing framework: synthesis of insights from leading subject matter experts.

    Science.gov (United States)

    Kawamoto, Kensaku; Hongsermeier, Tonya; Wright, Adam; Lewis, Janet; Bell, Douglas S; Middleton, Blackford

    2013-01-01

    To identify key principles for establishing a national clinical decision support (CDS) knowledge sharing framework. As part of an initiative by the US Office of the National Coordinator for Health IT (ONC) to establish a framework for national CDS knowledge sharing, key stakeholders were identified. Stakeholders' viewpoints were obtained through surveys and in-depth interviews, and findings and relevant insights were summarized. Based on these insights, key principles were formulated for establishing a national CDS knowledge sharing framework. Nineteen key stakeholders were recruited, including six executives from electronic health record system vendors, seven executives from knowledge content producers, three executives from healthcare provider organizations, and three additional experts in clinical informatics. Based on these stakeholders' insights, five key principles were identified for effectively sharing CDS knowledge nationally. These principles are (1) prioritize and support the creation and maintenance of a national CDS knowledge sharing framework; (2) facilitate the development of high-value content and tooling, preferably in an open-source manner; (3) accelerate the development or licensing of required, pragmatic standards; (4) acknowledge and address medicolegal liability concerns; and (5) establish a self-sustaining business model. Based on the principles identified, a roadmap for national CDS knowledge sharing was developed through the ONC's Advancing CDS initiative. The study findings may serve as a useful guide for ongoing activities by the ONC and others to establish a national framework for sharing CDS knowledge and improving clinical care.

  1. New tools for an old trade: a socio-technical appraisal of how electronic decision support is used by primary care practitioners.

    Science.gov (United States)

    Peiris, David; Usherwood, Tim; Weeramanthri, Tarun; Cass, Alan; Patel, Anushka

    2011-11-01

    This article explores Australian general practitioners' (GPs) views on a novel electronic decision support (EDS) tool being developed for cardiovascular disease management. We use Timmermans and Berg's technology-in-practice approach to examine how technologies influence and are influenced by the social networks in which they are placed. In all, 21 general practitioners who piloted the tool were interviewed. The tool occupied an ill-defined middle ground in a dialectical relationship between GPs' routine care and factors promoting best practice. Drawing on Lipsky's concept of 'street-level bureaucrats', the tool's ability to process workloads expeditiously was of greatest appeal to GPs. This feature of the tool gave it the potential to alter the structure, process and content of healthcare encounters. The credibility of EDS tools appears to be mediated by fluid notions of best practice, based on an expert scrutiny of the evidence, synthesis via authoritative guidelines and dissemination through trusted and often informal networks. Balanced against this is the importance of 'soft' forms of knowledge such as intuition and timing in everyday decision-making. This resonates with Aristotle's theory of phronesis (practical wisdom) and may render EDS tools inconsequential if they merely process biomedical data. While EDS tools show promise in improving health practitioner performance, the socio-technical dimensions of their implementation warrant careful consideration. © 2011 The Authors. Sociology of Health & Illness © 2011 Foundation for the Sociology of Health & Illness/Blackwell Publishing Ltd.

  2. Methodological approach and tools for systems thinking in health systems research: technical assistants' support of health administration reform in the Democratic Republic of Congo as an application.

    Science.gov (United States)

    Ribesse, Nathalie; Bossyns, Paul; Marchal, Bruno; Karemere, Hermes; Burman, Christopher J; Macq, Jean

    2017-03-01

    In the field of development cooperation, interest in systems thinking and complex systems theories as a methodological approach is increasingly recognised. And so it is in health systems research, which informs health development aid interventions. However, practical applications remain scarce to date. The objective of this article is to contribute to the body of knowledge by presenting the tools inspired by systems thinking and complexity theories and methodological lessons learned from their application. These tools were used in a case study. Detailed results of this study are in process for publication in additional articles. Applying a complexity 'lens', the subject of the case study is the role of long-term international technical assistance in supporting health administration reform at the provincial level in the Democratic Republic of Congo. The Methods section presents the guiding principles of systems thinking and complex systems, their relevance and implication for the subject under study, and the existing tools associated with those theories which inspired us in the design of the data collection and analysis process. The tools and their application processes are presented in the results section, and followed in the discussion section by the critical analysis of their innovative potential and emergent challenges. The overall methodology provides a coherent whole, each tool bringing a different and complementary perspective on the system.

  3. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    Summary of progress since last CMS week. Ten years of construction work have been completed. CMS is closed, in very close to the ideal low luminosity configuration, and performed well in the first tests with LHC beam. Behind this encouraging news is the story of a summer of intense commitment by many teams (from the collaboration and 3 CERN departments) working together, against the clock and despite many minor setbacks, to ensure that the experiment was ready to play a leading role in the excitement of September 10. Following beampipe bakeout and refill with pure neon, a magnificent effort by the ECAL group and the pt 5 technical crew made it possible to install and commission all 4 ECAL endcap Dees before the end of August. In the shadow of this activity, the barrel and forward pixel trackers and part of the beam monitoring were installed within the vac tank. The pt 5 technical teams then succeeded in safely removing the 20t installation tables and their support blocks from beneath the already installed ...

  4. Technical writing versus technical writing

    Science.gov (United States)

    Dillingham, J. W.

    1981-01-01

    Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

  5. Scientific Opinion on a technical file submitted by the US Authorities to support a request to list a new option among the EU import requirements for wood of Agrilus planipennis host plants

    DEFF Research Database (Denmark)

    Baker, R.; Candresse, T.; Dormannsné Simon, E.

    2011-01-01

    This document presents the scientific opinion of the Panel on Plant Health on the technical file submitted by the US Authorities to support a request to list a new option among the EU import requirements for wood of Agrilus planipennis host plants. The option under consideration is a heat treatme...

  6. Dose Modeling Evaluations and Technical Support Document For the Authorized Limits Request for the DOE-Owned Property Outside the Limited Area, Paducah Gaseous Diffusion Plant Paducah, Kentucky

    Energy Technology Data Exchange (ETDEWEB)

    Boerner, A. J. [Oak Ridge Institute for Science and Education (ORISE), Oak Ridge, TN (United States). Independent Environmental Assessment and Verification Program; Maldonado, D. G. [Oak Ridge Institute for Science and Education (ORISE), Oak Ridge, TN (United States). Independent Environmental Assessment and Verification Program; Hansen, Tom [Ameriphysics, LLC (United States)

    2012-09-01

    guidelines as inputs into the code was also performed to determine the maximum (peak) dose for all receptors. This report contains the technical basis in support of the DOE?s derivation of ALs for the 'Property.' A complete description of the methodology, including an assessment of the input parameters, model inputs, and results is provided in this report. This report also provides initial recommendations on applying the derived soil guidelines.

  7. Dose Modeling Evaluations and Technical Support Document For the Authorized Limits Request for the DOE-Owned Property Outside the Limited Area, Paducah Gaseous Diffusion Plant Paducah, Kentucky

    International Nuclear Information System (INIS)

    Boerner, A. J.

    2012-01-01

    guidelines as inputs into the code was also performed to determine the maximum (peak) dose for all receptors. This report contains the technical basis in support of the DOE's derivation of ALs for the 'Property'. A complete description of the methodology, including an assessment of the input parameters, model inputs, and results is provided in this report. This report also provides initial recommendations on applying the derived soil guidelines

  8. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Tuesday 3 February 2004 From 09:00 to 13:30 - Training Centre Auditorium - bldg. 593, room 11 USB (Universal Serial Bus) CYPRESS Seminar Claudia Colombini, Field Application Engineer CYPRESS ActiveComp Electronic GmbH D-85077 MANCHING, Germany As a pioneer in USB, CYPRESS sets the standard for cost-effective solutions without sacrificing functionality, performance or reliability. Having shipped over 200 million USB devices, Cypress is the undisputed market leader and demonstrates unmatched USB expertise. With the industry's broadest selection of USB solutions, Cypress has the right silicon, software and support for every USB application, from Low-speed to High-Speed and USB On-The-Go (OTG). 9:00 - 10:30 Overview of USB systems. USB CYPRESS product overview. Peripherals: Low Speed, Full Speed, High Speed (1.1 and 2.0). Hub Solutions, Embedded Host Solutions, On-The-Go (OTG) and wireless USB. USB Development Tools (first part) 10:30 -...

  9. Final Technical Report on STTR Project DE-FG02-06ER86281 Particle Tracking in Matter-Dominated Beam Lines (G4beamline)

    Energy Technology Data Exchange (ETDEWEB)

    Muons, Inc.

    2011-05-19

    This project has been for software development of the G4beamline [1] program, which is a particle-tracking simulation program based on the Geant4 toolkit [2], optimized for beam lines. This program can perform more realistic simulations than most alternatives, while being significantly easier to use by physicists. This project has fostered the general acceptance of G4beamline within the muon community, and has assisted in expanding its role outside that community. During this project, the G4beamline user community has grown from about a half-dozen users to more than 200 users around the world. This project also validated our business decision to keep G4beamline an open-source program, judging that an STTR project would provide more development resources than would marketing and selling the program. G4beamline is freely available to the physics community, and has been well validated against experiments and other codes within its domain. Muons, Inc. continues to support and develop the program, and a major part of the company's continued success and growth is directly related to our expertise in applying this program to interesting applications.

  10. International cooperation on technical support for regulation of safety-related activities on the transformation of the destroyed Chernobyl Nuclear Power Plant Power Unit into an ecologically safe system

    International Nuclear Information System (INIS)

    Groniov, G.; Kondratiev, S.; Kutina, L.; Bachner, D.; Kuechler, L.; Denver, D.

    2010-01-01

    The world's most severe nuclear accident destroyed the fourth unit at the Chernobyl nuclear power plant in 1986. In the six months following the accident, a localizing building was erected over the unit to contain the nuclear materials and provide support services for managing the destroyed reactor. Since 1997, an international project which includes both urgent measures for stabilization and safety upgrading as well as long-term measures for transforming the facility into an ecologically safe system has been under way. This paper discusses an important aspect of this project which has been the cooperation amongst the technical support organizations of the Ukrainian regulatory authorities and the technical support from international organizations. (author)

  11. Baryonic Dark Matter

    OpenAIRE

    De Paolis, F.; Jetzer, Ph.; Ingrosso, G.; Roncadelli, M.

    1997-01-01

    Reasons supporting the idea that most of the dark matter in galaxies and clusters of galaxies is baryonic are discussed. Moreover, it is argued that most of the dark matter in galactic halos should be in the form of MACHOs and cold molecular clouds.

  12. Remediation of lead-contaminated sediment by biochar-supported nano-chlorapatite: Accompanied with the change of available phosphorus and organic matters.

    Science.gov (United States)

    Huang, Danlian; Deng, Rui; Wan, Jia; Zeng, Guangming; Xue, Wenjing; Wen, Xiaofeng; Zhou, Chengyun; Hu, Liang; Liu, Xigui; Xu, Piao; Guo, Xueying; Ren, Xiaoya

    2018-04-15

    Some rivers in China have been seriously contaminated due to the discharge of lead (Pb) smelting wastewater. In this study, biochar-supported nano-chlorapatite (BC-nClAP) was synthesized to immobilize Pb in contaminated sediment. The remediation effect of BC-nClAP on Pb-contaminated sediment was evaluated through batch experiments and the materials were characterized by x-ray diffraction, scanning electron microscope, Brunner-Emmet-Teller and electronic differential system. It was found that BC-nClAP can transform Pb effectively from labile fraction into stable fraction with a maximum transformation efficiency increasing to 94.1% after 30 days of treatment, and the stabilization efficiency of toxicity characteristic leaching procedure reached 100% only after 16 days of treatment. The content of available phosphorus (AP) in the sediments treated by BC-nClAP was much less than that treated by nClAP, which indicated a lower risk of eutrophication and suggested the dissolution-precipitation mechanism involved in Pb immobilization. BC-nClAP presented the best immobilization efficiency of Pb and the content of organic matters in BC-nClAP treated samples increased the most, thus the OM might play an important role during the Pb immobilization. Copyright © 2018 Elsevier B.V. All rights reserved.

  13. The potential of Sentinel 2 and PROBA-V images for supporting early warnings of particulate matter pollution episodes in Ploiesti urban area

    Science.gov (United States)

    Dunea, Daniel; Iordache, Stefania; Pohoata, Alin; Lungu, Emil; Ianache, Cornel; Ianache, Radu

    2016-04-01

    overlapped on the GIS thematic layers of the Ploiesti city area to develop the integrated system of PM movement prediction. All thematic layers were referenced to the same coordinate system using local 1970 stereographic projection and Dealul Piscului 1970 geographic coordinate system. The meteorological inputs used in experiments included long term time series recorded at local station. We combined these multiple datasets to find potential correlations that can be used for improving the prediction of particulate matter pollution episodes in Ploiesti urban area with latest state-of-the-art satellite imagery support. This study received funding from the European Economic Area Financial Mechanism 2009 - 2014 under the project ROKIDAIR "Towards a better protection of children against air pollution threats in the urban areas of Romania" contract no. 20SEE/30.06.2014 (http://www.rokidair.ro/en).

  14. Dark Matter

    Directory of Open Access Journals (Sweden)

    Einasto J.

    2011-06-01

    Full Text Available I give a review of the development of the concept of dark matter. The dark matter story passed through several stages from a minor observational puzzle to a major challenge for theory of elementary particles. Modern data suggest that dark matter is the dominant matter component in the Universe, and that it consists of some unknown non-baryonic particles. Dark matter is the dominant matter component in the Universe, thus properties of dark matter particles determine the structure of the cosmic web.

  15. Detecting dark matter

    International Nuclear Information System (INIS)

    Dixon, Roger L.

    2000-01-01

    Dark matter is one of the most pressing problems in modern cosmology and particle physic research. This talk will motivate the existence of dark matter by reviewing the main experimental evidence for its existence, the rotation curves of galaxies and the motions of galaxies about one another. It will then go on to review the corroborating theoretical motivations before combining all the supporting evidence to explore some of the possibilities for dark matter along with its expected properties. This will lay the ground work for dark matter detection. A number of differing techniques are being developed and used to detect dark matter. These will be briefly discussed before the focus turns to cryogenic detection techniques. Finally, some preliminary results and expectations will be given for the Cryogenic Dark Matter Search (CDMS) experiment

  16. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    2013-01-01

      Since the last report, much visible progress has been made, as the LS1 programme approaches the halfway point. From early October, technical and safety shift-crew have been present around the clock, allowing detectors to stay switched on overnight, ensuring that safety systems are operational and instructions for non-expert shift-crew are clear. LS1 progress Throughout the summer, whilst the solenoid vacuum tank and YB0 surfaces were accessible, an extensive installation programme took place to prepare for Tracker colder operation and the PLT installation, in 2014, the Phase 1 Pixel Tracker installation, in 2016–’17, and the HCAL Phase 1 upgrade completion, ending in LS2. This included pipework for N2 or dry air to flush the Tracker bulkhead region, many sensors to monitor temperature and dew point in the Tracker and its service channels, heating wires outside the Tracker cooling bundles, supports for the new vacuum-jacketed, concentric, CO2 Pixel cooling lines, the PLT cool...

  17. Decision Support System for Aquifer Recharge (AR) and Aquifer Storage and Recovery (ASR) Planning, Design, and Evaluation - Principles and Technical Basis

    Science.gov (United States)

    Aquifer recharge (AR) is a technical method being utilized to enhance groundwater resources through man-made replenishment means, such as infiltration basins and injections wells. Aquifer storage and recovery (ASR) furthers the AR techniques by withdrawal of stored groundwater at...

  18. TECHNICAL BASIS FOR DOE STANDARD 3013 EQUIVALENCY SUPPORTING REDUCED TEMPERATURE STABILIZATION OF OXALATE-DERIVED PLUTONIUM OXIDE PRODUCED BY THE HB-LINE FACILITY AT SAVANNAH RIVER SITE

    Energy Technology Data Exchange (ETDEWEB)

    Duffey, J.; Livingston, R.; Berg, J.; Veirs, D.

    2012-07-02

    The HB-Line (HBL) facility at the Savannah River Site (SRS) is designed to produce high-purity plutonium dioxide (PuO{sub 2}) which is suitable for future use in production of Mixed Oxide (MOX) fuel. The MOX Fuel Fabrication Facility (MFFF) requires PuO{sub 2} feed to be packaged per the U.S. Department of Energy (DOE) Standard 3013 (DOE-STD-3013) to comply with the facility's safety basis. The stabilization conditions imposed by DOE-STD-3013 for PuO{sub 2} (i.e., 950 C for 2 hours) preclude use of the HBL PuO{sub 2} in direct fuel fabrication and reduce the value of the HBL product as MFFF feedstock. Consequently, HBL initiated a technical evaluation to define acceptable operating conditions for production of high-purity PuO{sub 2} that fulfills the DOE-STD-3013 criteria for safe storage. The purpose of this document is to demonstrate that within the defined operating conditions, the HBL process will be equivalent for meeting the requirements of the DOE-STD-3013 stabilization process for plutonium-bearing materials from the DOE complex. The proposed 3013 equivalency reduces the prescribed stabilization temperature for high-purity PuO{sub 2} from oxalate precipitation processes from 950 C to 640 C and places a limit of 60% on the relative humidity (RH) at the lowest material temperature. The equivalency is limited to material produced using the HBL established flow sheet, for example, nitric acid anion exchange and Pu(IV) direct strike oxalate precipitation with stabilization at a minimum temperature of 640 C for four hours (h). The product purity must meet the MFFF acceptance criteria of 23,600 {micro}g/g Pu (i.e., 2.1 wt %) total impurities and chloride content less than 250 {micro}g/g of Pu. All other stabilization and packaging criteria identified by DOE-STD-3013-2012 or earlier revisions of the standard apply. Based on the evaluation of test data discussed in this document, the expert judgment of the authors supports packaging the HBL product under a 3013

  19. Speech Matters

    DEFF Research Database (Denmark)

    Hasse Jørgensen, Stina

    2011-01-01

    About Speech Matters - Katarina Gregos, the Greek curator's exhibition at the Danish Pavillion, the Venice Biannual 2011.......About Speech Matters - Katarina Gregos, the Greek curator's exhibition at the Danish Pavillion, the Venice Biannual 2011....

  20. Memory Matters

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Memory Matters KidsHealth / For Kids / Memory Matters What's in ... of your complex and multitalented brain. What Is Memory? When an event happens, when you learn something, ...

  1. GPHS-RTGs in support of the Cassini RTG Program. Addendum to the final technical report, May 1--December 31, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    This Addendum to the Cassini GPHS-RTG Program Final Technical Progress Report describes activities performed during the period 1 May 1998 through 31 December 1998, including effort reflecting contract modification M058. These activities include Earth Gravity Assist (EGA) reentry and related analyses which are detailed in Part A, and effort related to the installation of CAGO equipment within Lockheed Martin`s Building 100 facility in Valley Forge, PA, which is detailed in Part B.

  2. GPHS-RTGs in support of the Cassini RTG Program. Addendum to the final technical report, May 1-December 31, 1998

    International Nuclear Information System (INIS)

    1998-12-01

    This Addendum to the Cassini GPHS-RTG Program Final Technical Progress Report describes activities performed during the period 1 May 1998 through 31 December 1998, including effort reflecting contract modification M058. These activities include Earth Gravity Assist (EGA) reentry and related analyses which are detailed in Part A, and effort related to the installation of CAGO equipment within Lockheed Martin's Building 100 facility in Valley Forge, PA, which is detailed in Part B

  3. OSH technical reference manual

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  4. GPHS-RTGs in support of the Cassini Mission. Semi-annual technical progress report, April 3, 1995--October 1, 1995

    International Nuclear Information System (INIS)

    1995-01-01

    This document is the April-October 1995 Progress Report on the Cassini RTG Program. Nine tasks are summarized; (1) Spacecraft integration and liason, (2) Engineering support, (3) Safety, (4) Unicouple fabrication, (5) ETG fabrication, assembly, and test, (6) Ground support equipment, (7) RTG shipping and launch support, (8) Design, reviews, and mission applications, and (9) Project management, QA, contract changes, and material acquisitions

  5. GPHS-RTGs in support of the Cassini mission. Semi-annual technical report, 29 March 1993--26 September 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-24

    The following tasks were reported on: Spacecraft integration and liaison, engineering support, safety, qualified unicouple fabrication, ETG fabrication/assembly/test, ground support equipment, RTG shipping and launch support, designs/reviews/mission applications, project management/quality assurance/contract changes.

  6. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimize the management of the Technical Network (TN), to ease the understanding and purpose of devices connected to the TN, and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive email notifications from IT/CS asking them to add the corresponding information in the network database. Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  7. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimise the management of the Technical Network (TN), to facilitate understanding of the purpose of devices connected to the TN and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive e-mails from IT/CS asking them to add the corresponding information in the network database at "network-cern-ch". Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  8. Dark Matter

    Indian Academy of Sciences (India)

    What You See Ain't What. You Got, Resonance, Vol.4,. No.9,1999. Dark Matter. 2. Dark Matter in the Universe. Bikram Phookun and Biman Nath. In Part 11 of this article we learnt that there are compelling evidences from dynamics of spiral galaxies, like our own, that there must be non-luminous matter in them. In this.

  9. Macro Dark Matter

    CERN Document Server

    Jacobs, David M; Lynn, Bryan W.

    2015-01-01

    Dark matter is a vital component of the current best model of our universe, $\\Lambda$CDM. There are leading candidates for what the dark matter could be (e.g. weakly-interacting massive particles, or axions), but no compelling observational or experimental evidence exists to support these particular candidates, nor any beyond-the-Standard-Model physics that might produce such candidates. This suggests that other dark matter candidates, including ones that might arise in the Standard Model, should receive increased attention. Here we consider a general class of dark matter candidates with characteristic masses and interaction cross-sections characterized in units of grams and cm$^2$, respectively -- we therefore dub these macroscopic objects as Macros. Such dark matter candidates could potentially be assembled out of Standard Model particles (quarks and leptons) in the early universe. A combination of earth-based, astrophysical, and cosmological observations constrain a portion of the Macro parameter space; ho...

  10. The Voice of the Technical Writer.

    Science.gov (United States)

    Euler, James S.

    The author's voice is implicit in all writing, even technical writing. It is the expression of the writer's attitude toward audience, subject matter, and self. Effective use of voice is made possible by recognizing the three roles of the technical writer: transmitter, translator, and author. As a transmitter, the writer must consciously apply an…

  11. GPHS-RTGs in support of the Cassini Mission. Semi annual technical progress report, 28 March 1994--25 September 1994

    International Nuclear Information System (INIS)

    1994-01-01

    The progress on the radioisotope generators and ancillary activities is described. This report is organized by program task as follows: spacecraft integration and liaison; engineering support; safety; qualified unicouple fabrication; ETG fabrication, assembly, and test; ground support equipment; RTG shipping and launch support; design, reviews, and mission applications; project management, quality assurance and reliability, contract changes, non-capital CAGO acquisition, and CAGO maintenance; contractor acquired government owned property (CAGO) acquisition

  12. Onboard Hydrogen/Helium Sensors in Support of the Global Technical Regulation: An Assessment of Performance in Fuel Cell Electric Vehicle Crash Tests

    Energy Technology Data Exchange (ETDEWEB)

    Post, M. B.; Burgess, R.; Rivkin, C.; Buttner, W.; O' Malley, K.; Ruiz, A.

    2012-09-01

    Automobile manufacturers in North America, Europe, and Asia project a 2015 release of commercial hydrogen fuel cell powered light-duty road vehicles. These vehicles will be for general consumer applications, albeit initially in select markets but with much broader market penetration expected by 2025. To assure international harmony, North American, European, and Asian regulatory representatives are striving to base respective national regulations on an international safety standard, the Global Technical Regulation (GTR), Hydrogen Fueled Vehicle, which is part of an international agreement pertaining to wheeled vehicles and equipment for wheeled vehicles.

  13. Technical support by Solthis for health-care workers in order to decentralise medical treatment for people living with HIV in the Ségou region of Mali

    Directory of Open Access Journals (Sweden)

    A. Akonde

    2009-01-01

    Full Text Available Medical treatment for people living with HIV/AIDS started in Mali as early as 1997 thanks to civil society. The national response was officialised by the adoption of the Malian Initiative for Access to Antiretroviral Therapy (Initiative Malienne d’Accès aux Antirétroviraux IMAARV. In 2004 ART, drugs against opportunistic infections and basic biological monitoring were made available free of charge by decree. In 2005, decentralisation of health-care to regions and circles became one of the main thrusts of the national strategy for the fight against the pandemic. Sub-Saharan African countries are making significant efforts to provide full geographical coverage of their national territory.It is in this “scaling-up” context that the Solthis NGO (Solidarité Thérapeutique et Initiatives contre le Sida began cooperating with Malian actors to extend access to quality treatment for patients living with HIV/AIDS in the city and region of Ségou. Based on a developmental approach, Solthis opted for continuing in situ technical support for national actors in the fight against AIDS. Thanks to the daily presence of a team “in the field” Solthis devotes a large part of its activities to capacity-building for health-care workers through an exchange of medical and scientific expertise. Efforts were also made to improve health-care workers’ working conditions and to make various tests and drugs accessible to patients infected with HIV. The initial aim was to encourage universal access to ART. Today, the Ségou programme supported by Solthis has developed over 1,500 new treatments in the region. In addition, every PMTCT centre in the region offers prevention and treatment services to mothers and children. Today, the Ségou region is an integral part of the IMAARV initiative as a decentralisation pilot project.Le traitement médical des malades atteints du VIH/SIDA a débuté au Mali dès 1997 grâce à la société civile. La r

  14. D matter

    International Nuclear Information System (INIS)

    Shiu, Gary; Wang Liantao

    2004-01-01

    We study the properties and phenomenology of particlelike states originating from D branes whose spatial dimensions are all compactified. They are nonperturbative states in string theory and we refer to them as D matter. In contrast to other nonperturbative objects such as 't Hooft-Polyakov monopoles, D-matter states could have perturbative couplings among themselves and with ordinary matter. The lightest D particle (LDP) could be stable because it is the lightest state carrying certain (integer or discrete) quantum numbers. Depending on the string scale, they could be cold dark matter candidates with properties similar to that of WIMPs or wimpzillas. The spectrum of excited states of D matter exhibits an interesting pattern which could be distinguished from that of Kaluza-Klein modes, winding states, and string resonances. We speculate about possible signatures of D matter from ultrahigh energy cosmic rays and colliders

  15. An Effective Health and Medical Technical Authority

    Science.gov (United States)

    Fogarty, Jennifer A.

    2009-01-01

    The NASA Governance model directed the formation of three Technical Authorities, Engineering; Safety and Mission Assurance; and Health and Medical, to ensure that risks are identified and adjudicated efficiently and transparently in concert with the spaceflight programs and projects. The Health and Medical Technical Authority (HMTA) has been implemented at the Johnson Space Center (JSC) and consists of the Chief Medical Office (CMO), the Deputy CMO, and HMTA Delegates. The JSC HMTA achieves the goals of risk identification and adjudication through the discharge of the appropriate technical expertise to human space flight programs and projects and the escalation of issues within program and technical authority boards. The JSC HMTA relies on subject matter experts (SMEs) in the Space Life Sciences Directorate at JSC as well as experts from other Centers to work crew health and performance issues at the technical level, develop requirements, oversee implementation and validation of requirements, and identify risks and non-compliances. Once a risk or potential noncompliance has been identified and reported to the programs or projects, the JSC HMTA begins to track it and closely monitor the program's or project's response. As a risk is developed or a non-compliance negotiated, positions from various levels of decision makers are sought at the program and project control boards. The HMTA may support a program or project position if it is satisfied with the decision making and vetting processes (ex. the subject matter expert voiced his/her concerns and all dissenting opinions were documented) and finds that the position both acknowledges the risk and cost of the mitigation and resolves the issue without changing NASA risk posture. The HMTA may disagree with a program or project position if the NASA risk posture has been elevated or obfuscated. If the HMTA does disagree with the program or project position, it will appeal to successively higher levels of authority so that

  16. Technical support of standards for high-level radioactive waste management. Volume B. Engineering controls. Task b report Mar-Aug 77

    International Nuclear Information System (INIS)

    1979-01-01

    This report is the result of work performed under the second part (Task B) of a four-part contract to gather technical information to evaluate enviornmental acceptablity of various options for disposing high-level wastes. The other tasks are: A-Source Term Characterization; C-Assessment of Migration Pathways; D-Assessment of Accidental Pathways. The scope of work for Task B was divided into 2 major steps: analysis of technology for engineering control of high-level wastes, and projections of costs for various alternative disposal technologies. Primary emphasis has been placed in non-reprocessed spent fuel. Brief consideration has been given to lower-level transuranic contaminated wastes which arise primarily from plutonium fuel fabrication and reprocessing plants. The objective of this limited review is to provide some insight into the state of the art for applying engineering controls to such wastes, including, where necessary, direct burial with high-level wastes in a geologic disposal facility

  17. Method and Result of Experiment for Support of Technical Solutions in the Field of Perfection of a Nuclear Fuel Cycle for Future PWR Reactors

    International Nuclear Information System (INIS)

    Ostrovskiy, V.; Kudryavtsev, E.; Tutnov, I.

    2011-01-01

    The paper presents the basics of approach of planning and carrying out of experiments to validate safety PWR reactors of the future when accepting technical solutions concerning using of improved fuel rods in fuel assembly. Basic principles and criteria used for the validation of technical solutions and developments in improving of nuclear fuel cycle of PWR reactors of the future are presented from the point of safety of future operation of modified fuel rods. We explore the questions of safety operation of PWR reactors with fuel assemblies, containing fuel rods with different length of fuel. The paper discusses the ways of solving of important tasks of critical facility experiments conducting for verification of new technical solutions in the sphere of PWR nuclear fuel cycle improvement on the base of international standards ISO 2000:9000 and functional safety recommendations of IEC (International Electromechanical Commission). New Federal laws of Russian Federation define the main principle for demands to NPP and any supplier of nuclear techniques. The principle is 'quantity indicators of risk should not exceed comprehensible social size of the established indicators of safety for any moment of operation of NPP'. On the other hand the second principle should be applied to extraction of the greatest benefit from operation of the equipment, systems or the NPP as whole: 'The long operation and full commercial use of resource and service properties of the equipment, systems and the NPP as a whole'. Realization of this principle assumes development and introduction of new technical solutions for a validation of guarantees of safety of the future operation of NPP or it separate components. Solving the practical problems of a validation of safety use of fuel rods with the increased length of a fuel column in fuel assembly in nuclear reactors of the future, we should choose new strategies and programs of verification experiments on the base of the analysis of guarantees

  18. Dark Matter

    International Nuclear Information System (INIS)

    Holt, S. S.; Bennett, C. L.

    1995-01-01

    These proceedings represent papers presented at the Astrophysics conference in Maryland, organized by NASA Goddard Space Flight Center and the University of Maryland. The topics covered included low mass stars as dark matter, dark matter in galaxies and clusters, cosmic microwave background anisotropy, cold and hot dark matter, and the large scale distribution and motions of galaxies. There were eighty five papers presented. Out of these, 10 have been abstracted for the Energy Science and Technology database

  19. Dark Matter

    International Nuclear Information System (INIS)

    Bashir, A.; Cotti, U.; De Leon, C. L.; Raya, A; Villasenor, L.

    2008-01-01

    One of the biggest scientific mysteries of our time resides in the identification of the particles that constitute a large fraction of the mass of our Universe, generically known as dark matter. We review the observations and the experimental data that imply the existence of dark matter. We briefly discuss the properties of the two best dark-matter candidate particles and the experimental techniques presently used to try to discover them. Finally, we mention a proposed project that has recently emerged within the Mexican community to look for dark matter

  20. Technical Note

    African Journals Online (AJOL)

    Administratör

    In this report on four patients, we did not use any of these techniques. The existence and the site of the fistulas was clearly demonstrated using basic but important preoperative detailed assessment and two intraoperative findings. The preoperative referral note that indicated the site of technical difficulty during the previous ...

  1. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    2010-01-01

    Operational Experience At the end of the first full-year running period of LHC, CMS is established as a reliable, robust and mature experiment. In particular common systems and infrastructure faults accounted for <0.6 % CMS downtime during LHC pp physics. Technical operation throughout the entire year was rather smooth, the main faults requiring UXC access being sub-detector power systems and rack-cooling turbines. All such problems were corrected during scheduled technical stops, in the shadow of tunnel access needed by the LHC, or in negotiated accesses or access extensions. Nevertheless, the number of necessary accesses to the UXC averaged more than one per week and the technical stops were inevitably packed with work packages, typically 30 being executed within a few days, placing a high load on the coordination and area management teams. It is an appropriate moment for CMS Technical Coordination to thank all those in many CERN departments and in the Collaboration, who were involved in CMS techni...

  2. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    2010-01-01

    Operational Experience Since the closure of the detector in February, the technical operation of CMS has been quite smooth and reliable. Some minor interventions in UXC were required to cure failures of power supplies, fans, readout boards and rack cooling connections, but all these failures were repaired in scheduled technical stops or parasitically during access dedicated to fixing LHC technical problems. The only occasion when CMS had to request an access between fills was to search for the source of an alarm from the leak-detection cables mounted in the DT racks. After a few minutes of diagnostic search, a leaking air-purge was found. Replacement was complete within 2 hours. This incident demonstrated once more the value of these leak detection cables; the system will be further extended (during the end of year technical stop) to cover more racks in UXC and the floor beneath the detector. The magnet has also been operating reliably and reacted correctly to the 14s power cut on 29 May (see below). In or...

  3. Technical endoscopy

    International Nuclear Information System (INIS)

    Cavalar, K.O.

    1988-01-01

    A survey is provided on different versions of endoscopes, taking into account the new developments of video endoscopy. With a variety of practical examples it is shown that technical tests using endoscopy are a demanding task for nondestructive testing, whose requirements can only be met on a customized basis. (orig./HP) [de

  4. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Monday 9 February 2004 From 10:00 to 12:00 - IT Auditorium - bldg. 31, 3rd floor ANSOFT High-Frequency Seminar David Prestaux, Application Engineer, ANSOFT F-78535 BUC, France This Technical Training seminar will present two Ansoft application products: Ansoft HFSS and Ansoft Designer. Ansoft HFSS makes use of the Finite Element Method (FEM) to calculate field solutions from first principles. It can accurately predict all high-frequency behaviours such as dispersion, mode conversion, and losses due to materials and radiation. Ansoft Designer is a suite of design tools to fully integrate high-frequency, physics-based electromagnetic simulations into a seamless system-level simulation environment. Ansoft Designer uses a simple interface to give complete control over every design task, by a method allowing multiple solvers, Solver on Demand. • Introduction • Overview of the Ansoft Total solution • Ansoft HFSS 9...

  5. Problems of technical cooperation

    International Nuclear Information System (INIS)

    Noramli, M.

    1987-01-01

    The main principles of the IAEA technical co-operation program, which intends to answer the requirements of the member states as regards technical assistance, are presented. IAEA offers its assistance in the supervision and financial support of the projects, which promise direct and quick profit to the member states. Projects related to the satisfaction of the main demands of humanity, industrial use, energy generation, radiation protection and other fields, which can promote the contribution of nuclear power generation to the course of peace, protection of health and thriving of states, are among them. 35 million dollars (USA) was allocated for the IAEA technical assistance and realization of the co-operation program in 1987

  6. FY2017 Final Report: Power of the People: A technical ethical and experimental examination of the use of crowdsourcing to support international nuclear safeguards verification.

    Energy Technology Data Exchange (ETDEWEB)

    Gastelum, Zoe Nellie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sentz, Kari [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Swanson, Meili Claire [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rinaudo, Cristina [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-10-01

    Recent advances in information technology have led to an expansion of crowdsourcing activities that utilize the “power of the people” harnessed via online games, communities of interest, and other platforms to collect, analyze, verify, and provide technological solutions for challenges from a multitude of domains. To related this surge in popularity, the research team developed a taxonomy of crowdsourcing activities as they relate to international nuclear safeguards, evaluated the potential legal and ethical issues surrounding the use of crowdsourcing to support safeguards, and proposed experimental designs to test the capabilities and prospect for the use of crowdsourcing to support nuclear safeguards verification.

  7. Technical support for GEIS: radioactive waste isolation in geologic formations. Volume 20. Thermo-mechanical stress analysis and development of thermal loading guidelines

    International Nuclear Information System (INIS)

    1978-04-01

    This volume is one of a 23-volume series which supplements a Contribution to Draft Generic Environmental Impact Statement on Commercial Waste Management: Radioactive Waste Isolation in Geologic Formations, Y/OWI/TM-44. The series provides a more complete technical basis for the preconceptual designs, resource requirements, and environmental source terms associated with isolating commercial LWR wastes in underground repositories in salt, granite, shale and basalt. Wastes are considered from three fuel cycles: uranium and plutonium recycling, no recycling of spent fuel, and uranium-only recycling. The thermo-mechanical analysis of proposed preconceptual repositories in granite, shale and basalt have been undertaken. The analysis, was conducted on three different levels of scale (i) Very Near Field (canister scale), (ii) Near Field (excavation scale) and (iii) Far Field (regional scale) studies. Three numerical methods were used to undertake the thermo-mechanical calculations; namely, the finite element method for thermal stress analysis, the boundary element method for thermal and thermal stress analysis and the semi-analytical method also for thermal and thermal stresses analysis. From the thermo-mechanical studies with simplifying assumptions on rock mass behavior where applicable, recommendations for areal thermal loadings to assure retrievability of the canisters and long term safety of the repository are given

  8. Improving student’s technical drawing in building technology course with shared and digital enrichment material in order to support green technology

    Science.gov (United States)

    Wizaka, W.; Nurdiani, N.

    2017-12-01

    Technical drawing is a step that is absolutely necessary to be mastered by the architects in presenting their product in design development phase. The easy readiness and completeness of information in a drawing determine the quality and timeliness of a project. An incomplete engineering drawing is difficult to read by foreman or craftsman, and the risk of misunderstanding of the drawing will cost expensive and have potential risk to create many bad implications in the project. Unfortunately, the knowledge and skill of drawing technique are often not completely mastered by most students. On the other hand, according to the regional development situation in architectural and construction issue, the drawing standards must be fully utilized in international standards in order to facilitate cooperative work involving workers and engineers from these region countries. This research will be described some errors that often made by students and of international drafting symbols that supposed to be well used by students and then insert multi-media resources as digital enrichment material that supposed to be used as an additional material. The goal of this study will be to examine how multi-media is employed to positively impact student learning in a Building Technology course.

  9. The Relationship of Repeated Technical Assistance Support Visits to the Delivery of Positive Health, Dignity, and Prevention (PHDP) Messages by Healthcare Providers in Mozambique: A Longitudinal Multilevel Analysis.

    Science.gov (United States)

    Gutin, Sarah A; Amico, K Rivet; Hunguana, Elsa; Munguambe, António Orlando; Rose, Carol Dawson

    Positive health, dignity, and prevention (PHDP) is Mozambique's strategy to engage clinicians in the delivery of prevention messages to their HIV-positive clients. This national implementation strategy uses provider trainings on offering key messages and focuses on intervening on 9 evidence-based risk reduction areas. We investigated the impact of longitudinal technical assistance (TA) as an addition to this basic training. We followed 153 healthcare providers in 5 Mozambican provinces over 6 months to evaluate the impact of on-site, observation-based TA on PHDP implementation. Longitudinal multilevel models were estimated to model change in PHDP message delivery over time among individual providers. With each additional TA visit, providers delivered about 1 additional PHDP message ( P < .001); clinicians and nonclinicians started at about the same baseline level, but clinicians improved more quickly ( P = .004). Message delivery varied by practice sector; maternal and child health sectors outperformed other sectors. Longitudinal TA helped reach the programmatic goals of the PHDP program in Mozambique.

  10. Development of AIDA v4.3b Diabetes Simulator: Technical Upgrade to Support Incorporation of Lispro, Aspart, and Glargine Insulin Analogues

    Directory of Open Access Journals (Sweden)

    Eldon D. Lehmann

    2011-01-01

    Full Text Available Introduction. AIDA is an interactive educational diabetes simulator available on the Internet without charge since 1996 (accessible at: http://www.2aida.org/. Since the program’s original release, users have developed new requirements, with new operating systems coming into use and more complex insulin management regimens being adopted. The current work has aimed to design a comprehensive diabetes simulation system from both a clinical and information technology perspective. Methods. A collaborative development is taking place with a new generic model of subcutaneous insulin absorption, permitting the simulation of rapidly-acting and very long-acting insulin analogues, as well as insulin injections larger than 40 units. This novel, physiological insulin absorption model has been incorporated into AIDA v4. Technical work has also been undertaken to install and operate the AIDA software within a DOSBox emulator, to ensure compatibility with Windows XP, Vista and 7 operating systems as well as Apple Macintosh computers running Parallels PC emulation software. Results. Plasma insulin simulations are demonstrated following subcutaneous injections of a rapidly-acting insulin analogue, a short-acting insulin preparation, intermediate-acting insulin, and a very long-acting insulin analogue for injected insulin doses up to 60 units of insulin. Discussion. The current work extends the useful life of the existing AIDA v4 program.

  11. Forecasts of county-level land uses under three future scenarios: a technical document supporting the Forest Service 2010 RPA Assessment

    Science.gov (United States)

    David N. Wear

    2011-01-01

    Accurately forecasting future forest conditions and the implications for ecosystem services depends on understanding land use dynamics. In support of the 2010 Renewable Resources Planning Act (RPA) Assessment, we forecast changes in land uses for the coterminous United States in response to three scenarios. Our land use models forecast urbanization in response to the...

  12. Selection and Breeding of Cattle in Asia: Strategies and Criteria for Improved Breeding. Prepared under the Framework of an RCA Project with the Technical Support of the Joint FAO/IAEA Programme of Nuclear Techniques in Food and Agriculture

    International Nuclear Information System (INIS)

    2009-10-01

    The International Atomic Energy Agency (IAEA) and the Regional Cooperative Agreement for Asia and the Pacific Region (RCA), with the technical support of the Joint FAO/IAEA Programme of Nuclear Techniques in Food and Agriculture, implemented a Technical Cooperation (TC) project entitled Integrated Approach for Improving Livestock Production Using Indigenous Resources and Conserving the Environment (RAS/5/044). The 23 project counterparts and the IAEA technical officer, based on the lack of standard practices in the region with regard to selection of cattle for breeding purposes, and the need to properly manage the genetic resources within each country for improving the productivity of the existing stock while maintaining the unique and beneficial genetic characteristics of the indigenous breeds, agreed during the first meeting to request the IAEA to recruit a group of experts with the task of preparing guidelines for the selection and breeding of cattle and buffalo on the Asian continent. To address these recommendations, an experts meeting on Selection Criteria for Breeding Heifers was organized and held in Mymensingh, Bangladesh. The meeting was hosted by the Faculty of Veterinary Science of the Bangladesh Agricultural University (BAU) from 6 to 10 February 2006. It was attended by six foreign experts and two local experts, and was supported by the technical officer of RAS/5/044. The experts from countries participating in RAS/5/044 gave presentations on the current state of cattle breeding in their countries and two experts working in industrialized countries within the region (New Zealand and Australia) informed the participants about the existing cattle breeding programmes in their respective countries and offered their perspectives on how similar approaches could be transferred to the Member States participating in RAS/5/044. All experts also made a field visit to a prominent dairy-producing region, to experience at first-hand some of the current programmes

  13. Immediate implant-supported oral rehabilitation using a photocurable plastic skull model and laser welding. A technical note on the screw-retained type: Part 1.

    Science.gov (United States)

    Tomotake, Yoritoki; Ishida, Osamu; Kanitani, Hideo; Ichikawa, Tetsuo

    2002-01-01

    This article describes a new procedure for immediate implant-supported oral rehabilitation using a photocurable resin skull model and a laser-welding apparatus. Preoperatively, the framework was fabricated on a photocurable resin skull model produced from a CT scan and individually designed guide template. The implants were immediately placed using the guide template; laser welding connected the components of framework. Despite the custom-made prosthesis, the total treatment from implant placement to superstructure placement can be completed within only 1 day. This procedure for immediate implant-supported oral rehabilitation using a photocurable resin skull model and a laser-welding apparatus may be useful for any implant system and patient.

  14. Photocatalytic degradation of dissolved organic matter in the ground water employing TiO2 film supported on stainless steel plate

    International Nuclear Information System (INIS)

    Andayani, W.; Sumartono, A.; Lindu, M.

    2012-01-01

    The Taman Palem Residences, Cengkareng, Indonesia has a groundwater problem as a main sources of drinking water in the area due to yellowish brown colour of the water, that may come from dissolved organic matter (DOM), humic substances. Photocatalytic degradation using TiO 2 coated on a stainless steel plate (8 x 8 cm) to degrade the dissolved organic matter was studied. Groundwater samples were collected at 150 m deep from Taman Palem Residences. The TiO 2 catalyst was made from deep coating in a sol-gel system of titanium (IV) diisopropoxidebisacetylacetonate (TAA) precursor and immobilized at stainless steel plate (8 x 8 cm), followed by calcination at 525°C. Two catalyst sheets were put in batch reactor containing groundwater. The ground water containing DOM were irradiated by UV black light at varying initial pH values i.e 5, 7 and 9. Sampling of solution was taken at the interval time of 0, 1, 2, 4, and 6 hours. DOM residu in water before and after irradiation were measured by spectrophotometer UV-Vis at 300 nm. Photocatalytic degradation of DOM was greater in acid solution than in basic solution. The determination of intermediate degradation products by HPLC revealed that oxalic acid was detected consistently. (author)

  15. Chemical Force Spectroscopy Evidence Supporting the Layer-by-Layer Model of Organic Matter Binding to Iron (oxy)Hydroxide Mineral Surfaces

    KAUST Repository

    Chassé , Alexander W.; Ohno, Tsutomu; Higgins, Steven R.; Amirbahman, Aria; Yildirim, Nadir; Parr, Thomas B.

    2015-01-01

    © 2015 American Chemical Society. The adsorption of dissolved organic matter (DOM) to metal (oxy)hydroxide mineral surfaces is a critical step for C sequestration in soils. Although equilibrium studies have described some of the factors controlling this process, the molecular-scale description of the adsorption process has been more limited. Chemical force spectroscopy revealed differing adhesion strengths of DOM extracted from three soils and a reference peat soil material to an iron (oxy)hydroxide mineral surface. The DOM was characterized using ultrahigh-resolution negative ion mode electrospray ionization Fourier Transform ion cyclotron resonance mass spectrometry. The results indicate that carboxyl-rich aromatic and N-containing aliphatic molecules of DOM are correlated with high adhesion forces. Increasing molecular mass was shown to decrease the adhesion force between the mineral surface and the DOM. Kendrick mass defect analysis suggests that mechanisms involving two carboxyl groups result in the most stable bond to the mineral surface. We conceptualize these results using a layer-by-layer "onion" model of organic matter stabilization on soil mineral surfaces.

  16. Sleep spindles: a physiological marker of age-related changes in gray matter in brain regions supporting motor skill memory consolidation.

    Science.gov (United States)

    Fogel, Stuart; Vien, Catherine; Karni, Avi; Benali, Habib; Carrier, Julie; Doyon, Julien

    2017-01-01

    Sleep is necessary for the optimal consolidation of procedural learning, and in particular, for motor sequential skills. Motor sequence learning remains intact with age, but sleep-dependent consolidation is impaired, suggesting that memory deficits for procedural skills are specifically impacted by age-related changes in sleep. Age-related changes in spindles may be responsible for impaired motor sequence learning consolidation, but the morphological basis for this deficit is unknown. Here, we found that gray matter in the hippocampus and cerebellum was positively correlated with both sleep spindles and offline improvements in performance in young participants but not in older participants. These results suggest that age-related changes in gray matter in the hippocampus relate to spindles and may underlie age-related deficits in sleep-related motor sequence memory consolidation. In this way, spindles can serve as a biological marker for structural brain changes and the related memory deficits in older adults. Copyright © 2016 Elsevier Inc. All rights reserved.

  17. Chemical Force Spectroscopy Evidence Supporting the Layer-by-Layer Model of Organic Matter Binding to Iron (oxy)Hydroxide Mineral Surfaces

    KAUST Repository

    Chassé, Alexander W.

    2015-08-18

    © 2015 American Chemical Society. The adsorption of dissolved organic matter (DOM) to metal (oxy)hydroxide mineral surfaces is a critical step for C sequestration in soils. Although equilibrium studies have described some of the factors controlling this process, the molecular-scale description of the adsorption process has been more limited. Chemical force spectroscopy revealed differing adhesion strengths of DOM extracted from three soils and a reference peat soil material to an iron (oxy)hydroxide mineral surface. The DOM was characterized using ultrahigh-resolution negative ion mode electrospray ionization Fourier Transform ion cyclotron resonance mass spectrometry. The results indicate that carboxyl-rich aromatic and N-containing aliphatic molecules of DOM are correlated with high adhesion forces. Increasing molecular mass was shown to decrease the adhesion force between the mineral surface and the DOM. Kendrick mass defect analysis suggests that mechanisms involving two carboxyl groups result in the most stable bond to the mineral surface. We conceptualize these results using a layer-by-layer "onion" model of organic matter stabilization on soil mineral surfaces.

  18. Technical basis in support of the conversion of the University of Missouri Research Reactor (MURR) core from highly-enriched to low-enriched uranium - core neutron physics

    Energy Technology Data Exchange (ETDEWEB)

    Stillman, J. [Argonne National Lab. (ANL), Argonne, IL (United States); Feldman, E. [Univ. of Missouri, Columbia, MO (United States). Columbia Research Reactor; Foyto, L [Univ. of Missouri, Columbia, MO (United States). Columbia Research Reactor; Kutikkad, K [Univ. of Missouri, Columbia, MO (United States). Columbia Research Reactor; McKibben, J C [Univ. of Missouri, Columbia, MO (United States). Columbia Research Reactor; Peters, N. [Univ. of Missouri, Columbia, MO (United States). Columbia Research Reactor; Stevens, J. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2012-09-01

    This report contains the results of reactor design and performance for conversion of the University of Missouri Research Reactor (MURR) from the use of highly-enriched uranium (HEU) fuel to the use of low-enriched uranium (LEU) fuel. The analyses were performed by staff members of the Global Threat Reduction Initiative (GTRI) Reactor Conversion Program at the Argonne National Laboratory (ANL) and the MURR Facility. The core conversion to LEU is being performed with financial support of the U. S. government.

  19. Evaluation of using cyclocranes to support drilling and production of oil and gas in wetland areas. Fourth quarterly technical progress report, Second quarter, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Eggington, W.J.

    1993-09-01

    The planned program falls under wetlands area research related to drilling, production, and transportation of oil and gas resources. Specifically the planned program addresses an evaluation of using cyclocraft to transport drill rigs, mud, pipes and other materials and equipment in a cost effective and environmentally safe manner to support oil and gas drilling and production operations in wetland areas. The cyclocraft is a proven hybrid aircraft that utilizes aerostatic and aerodynamic lift. This type of aircraft has considerable payload capacity, VTOL capability, high controllability, low operating cost, low downwash and high safety. The benefits of using a cyclocraft to transport drill rigs and materials over environmentally-sensitive surfaces would be significant. The cyclocraft has considerable cost and operational advantages over the helicopter. The major activity during the second quarter of 1993 was focussed on completion of Task 4, Preliminary Design. The selected design has been designated H.1 Cyclocraft by MRC. Also during the report period, Task 6, Ground Support, was completed and a report containing the results was submitted to DOE. This task addressed the complete H.1 Cyclocraft system, i.e. it included the need personnel, facilities and equipment to support cyclocraft operations in wetland areas.

  20. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    Overview From a technical perspective, CMS has been in “beam operation” state since 6th November. The detector is fully closed with all components operational and the magnetic field is normally at the nominal 3.8T. The UXC cavern is normally closed with the radiation veto set. Access to UXC is now only possible during downtimes of LHC. Such accesses must be carefully planned, documented and carried out in agreement with CMS Technical Coordination, Experimental Area Management, LHC programme coordination and the CCC. Material flow in and out of UXC is now strictly controlled. Access to USC remains possible at any time, although, for safety reasons, it is necessary to register with the shift crew in the control room before going down.It is obligatory for all material leaving UXC to pass through the underground buffer zone for RP scanning, database entry and appropriate labeling for traceability. Technical coordination (notably Stephane Bally and Christoph Schaefer), the shift crew and run ...

  1. Head Start Impact Study. Technical Report

    Science.gov (United States)

    Puma, Michael; Bell, Stephen; Cook, Ronna; Heid, Camilla; Shapiro, Gary; Broene, Pam; Jenkins, Frank; Fletcher, Philip; Quinn, Liz; Friedman, Janet; Ciarico, Janet; Rohacek, Monica; Adams, Gina; Spier, Elizabeth

    2010-01-01

    This Technical Report is designed to provide technical detail to support the analysis and findings presented in the "Head Start Impact Study Final Report" (U.S. Department of Health and Human Services, January 2010). Chapter 1 provides an overview of the Head Start Impact Study and its findings. Chapter 2 provides technical information on the…

  2. Gaseous Matter

    CERN Document Server

    Angelo, Joseph A

    2011-01-01

    aseous Matter focuses on the many important discoveries that led to the scientific interpretation of matter in the gaseous state. This new, full-color resource describes the basic characteristics and properties of several important gases, including air, hydrogen, helium, oxygen, and nitrogen. The nature and scope of the science of fluids is discussed in great detail, highlighting the most important scientific principles upon which the field is based. Chapters include:. Gaseous Matter An Initial Perspective. Physical Characteristics of Gases. The Rise of the Science of Gases. Kinetic Theory of

  3. Independent technical review, handbook

    International Nuclear Information System (INIS)

    1994-02-01

    Purpose Provide an independent engineering review of the major projects being funded by the Department of Energy, Office of Environmental Restoration and Waste Management. The independent engineering review will address questions of whether the engineering practice is sufficiently developed to a point where a major project can be executed without significant technical problems. The independent review will focus on questions related to: (1) Adequacy of development of the technical base of understanding; (2) Status of development and availability of technology among the various alternatives; (3) Status and availability of the industrial infrastructure to support project design, equipment fabrication, facility construction, and process and program/project operation; (4) Adequacy of the design effort to provide a sound foundation to support execution of project; (5) Ability of the organization to fully integrate the system, and direct, manage, and control the execution of a complex major project

  4. Independent technical review, handbook

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    Purpose Provide an independent engineering review of the major projects being funded by the Department of Energy, Office of Environmental Restoration and Waste Management. The independent engineering review will address questions of whether the engineering practice is sufficiently developed to a point where a major project can be executed without significant technical problems. The independent review will focus on questions related to: (1) Adequacy of development of the technical base of understanding; (2) Status of development and availability of technology among the various alternatives; (3) Status and availability of the industrial infrastructure to support project design, equipment fabrication, facility construction, and process and program/project operation; (4) Adequacy of the design effort to provide a sound foundation to support execution of project; (5) Ability of the organization to fully integrate the system, and direct, manage, and control the execution of a complex major project.

  5. Evaluation of using cyclocranes to support drilling & production of oil & gas in wetland areas. Sixth quarterly technical progress report, incorporating milestone schedule/status, October 1993--December 1993

    Energy Technology Data Exchange (ETDEWEB)

    Eggington, W.J.

    1994-04-01

    This report is a progress report on a planned program falling under wetlands area research related to drilling, production, and transportation of oil and gas resources. Specifically the planned program addresses an evaluation of using cyclocraft to transport drill rigs, mud, pipes and other materials and equipment in a cost effective and environmentally safe manner to support oil and gas drilling and production operations in wetland areas. During this period, task 5, subscale tests, and task 7, environmental impacts, were completed. Work was continued on task 10, technology transfer, and the preparation of the final report as part of task 11.

  6. Dark matters

    International Nuclear Information System (INIS)

    Silk, Joseph

    2010-01-01

    One of the greatest mysteries in the cosmos is that it is mostly dark. That is, not only is the night sky dark, but also most of the matter and the energy in the universe is dark. For every atom visible in planets, stars and galaxies today there exists at least five or six times as much 'Dark Matter' in the universe. Astronomers and particle physicists today are seeking to unravel the nature of this mysterious but pervasive dark matter, which has profoundly influenced the formation of structure in the universe. Dark energy remains even more elusive, as we lack candidate fields that emerge from well established physics. I will describe various attempts to measure dark matter by direct and indirect means, and discuss the prospects for progress in unravelling dark energy.

  7. Dirac matter

    CERN Document Server

    Rivasseau, Vincent; Fuchs, Jean-Nöel

    2017-01-01

    This fifteenth volume of the Poincare Seminar Series, Dirac Matter, describes the surprising resurgence, as a low-energy effective theory of conducting electrons in many condensed matter systems, including graphene and topological insulators, of the famous equation originally invented by P.A.M. Dirac for relativistic quantum mechanics. In five highly pedagogical articles, as befits their origin in lectures to a broad scientific audience, this book explains why Dirac matters. Highlights include the detailed "Graphene and Relativistic Quantum Physics", written by the experimental pioneer, Philip Kim, and devoted to graphene, a form of carbon crystallized in a two-dimensional hexagonal lattice, from its discovery in 2004-2005 by the future Nobel prize winners Kostya Novoselov and Andre Geim to the so-called relativistic quantum Hall effect; the review entitled "Dirac Fermions in Condensed Matter and Beyond", written by two prominent theoreticians, Mark Goerbig and Gilles Montambaux, who consider many other mater...

  8. Evaluation of using cyclocranes to support drilling and production of oil and gas in wetland areas. Fifth quarterly technical progress report, Third quarter, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Eggington, W.J.

    1993-12-31

    The planned program falls under wetlands area research related to drilling, production, and transportation of oil and gas resources. Specifically the planned program addresses an evaluation of using cyclocraft to transport drill rigs, mud, pipes and other materials and equipment in a cost effective and environmentally safe manner to support oil and gas drilling and production operations in wetland areas. The cyclocraft is a proven hybrid aircraft that utilizes aerostatic and aerodynamic lift. This type of aircraft has considerable payload capacity, VTOL capability, high controllability, low operating cost, low downwash and high safety. The benefits of using a cyclocraft to transport drill rigs and materials over environmentally-sensitive surfaces would be significant. The cyclocraft has considerable cost and operational advantages over the helicopter. In 1992, Task 1, Environmental Considerations, and Task 2, Transport Requirements, were completed. In the first two quarters of 1993, Task 3, Parametric Analysis, Task 4, Preliminary Design, and Task 6, Ground Support, were completed. Individual reports containing results obtained from each of these tasks were submitted to DOE. In addition, through June 30, 1993, a Subscale Test Plan was prepared under Task 5, Subscale Tests, and work was initiated on Task 7, Environmental Impacts, Task 8, Development Plan, Task 9, Operating Costs, and Task 10, Technology Transfer.

  9. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Switzerland (please sp...

  10. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Swi...

  11. INDOT Technical Training Plan : [Technical Summary

    Science.gov (United States)

    2012-01-01

    A wide range of job classifications, increasing technical : performance expectations, licensing and certification requirements, : budget restrictions and frequent department : reorganization has made technical training of employees : more difficult, ...

  12. Sustainable energy for all. Technical report of task force 1 in support of the objective to achieve universal access to modern energy services by 2030

    Energy Technology Data Exchange (ETDEWEB)

    Birol, Fatih [International Energy Agency, Paris (France); Brew-Hammond, Abeeku [University of Science and Technology (Ghana

    2012-04-15

    The UN Secretary General established the Sustainable Energy for All initiative in order to guide and support efforts to achieve universal access to modern energy, rapidly increase energy efficiency, and expand the use of renewable energies. Task forces were formed involving prominent energy leaders and experts from business, government, academia and civil society worldwide. The goal of the Task Forces is to inform the implementation of the initiative by identifying challenges and opportunities for achieving its objectives. This report contains the findings of Task Force One which is dedicated to the objective of achieving universal access to modern energy services by 2030. The report shows that universal energy access can be realized by 2030 with strong, focused actions set within a coordinated framework.

  13. Final Technical Report for Contract No. DE-EE0006332, "Integrated Simulation Development and Decision Support Tool-Set for Utility Market and Distributed Solar Power Generation"

    Energy Technology Data Exchange (ETDEWEB)

    Cormier, Dallas [San Diego Gas & Electric, CA (United States); Edra, Sherwin [San Diego Gas & Electric, CA (United States); Espinoza, Michael [San Diego Gas & Electric, CA (United States); Daye, Tony [Green Power Labs, San Diego, CA (United States); Kostylev, Vladimir [Green Power Labs, San Diego, CA (United States); Pavlovski, Alexandre [Green Power Labs, San Diego, CA (United States); Jelen, Deborah [Electricore, Inc., Valencia, CA (United States)

    2014-12-29

    This project will enable utilities to develop long-term strategic plans that integrate high levels of renewable energy generation, and to better plan power system operations under high renewable penetration. The program developed forecast data streams for decision support and effective integration of centralized and distributed solar power generation in utility operations. This toolset focused on real time simulation of distributed power generation within utility grids with the emphasis on potential applications in day ahead (market) and real time (reliability) utility operations. The project team developed and demonstrated methodologies for quantifying the impact of distributed solar generation on core utility operations, identified protocols for internal data communication requirements, and worked with utility personnel to adapt the new distributed generation (DG) forecasts seamlessly within existing Load and Generation procedures through a sophisticated DMS. This project supported the objectives of the SunShot Initiative and SUNRISE by enabling core utility operations to enhance their simulation capability to analyze and prepare for the impacts of high penetrations of solar on the power grid. The impact of high penetration solar PV on utility operations is not only limited to control centers, but across many core operations. Benefits of an enhanced DMS using state-of-the-art solar forecast data were demonstrated within this project and have had an immediate direct operational cost savings for Energy Marketing for Day Ahead generation commitments, Real Time Operations, Load Forecasting (at an aggregate system level for Day Ahead), Demand Response, Long term Planning (asset management), Distribution Operations, and core ancillary services as required for balancing and reliability. This provided power system operators with the necessary tools and processes to operate the grid in a reliable manner under high renewable penetration.

  14. Disposal of mixed waste: Technical, institutional, and policy factors

    International Nuclear Information System (INIS)

    Waters, R.D.; Gruebel, M.M.; Letourneau, M.J.; Case, J.T.

    1996-01-01

    In conjunction with the affected States as part of their interactions required by the Federal Facilities Compliance Act, the Department of Energy has been developing a process for a disposal configuration for its mixed low-level waste (MLLW). This effort, spanning more than two years, has reduced the potential disposal sites from 49 to 15. The remaining 15 sites have been subjected to a performance evaluation to determine their strengths and weaknesses for disposal of MLLW. The process has included institutional and policy factors as well as strictly technical analyses, and technical analyses must be supported by technical analyses, and technical analyses must be performed within a framework which includes some institutional considerations, with the institutional considerations selected for inclusion largely a matter of policy. While the disposal configuration process is yet to be completed, the experience to date offers a viable approach for solving some of these issues. Additionally, several factors remain to be addressed before an MLLW disposal configuration can be developed

  15. Technical support document: Energy efficiency standards for consumer products: Room air conditioners, water heaters, direct heating equipment, mobile home furnaces, kitchen ranges and ovens, pool heaters, fluorescent lamp ballasts and television sets. Volume 1, Methodology

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    The Energy Policy and Conservation Act (P.L. 94-163), as amended, establishes energy conservation standards for 12 of the 13 types of consumer products specifically covered by the Act. The legislation requires the Department of Energy (DOE) to consider new or amended standards for these and other types of products at specified times. DOE is currently considering amending standards for seven types of products: water heaters, direct heating equipment, mobile home furnaces, pool heaters, room air conditioners, kitchen ranges and ovens (including microwave ovens), and fluorescent light ballasts and is considering establishing standards for television sets. This Technical Support Document presents the methodology, data, and results from the analysis of the energy and economic impacts of the proposed standards. This volume presents a general description of the analytic approach, including the structure of the major models.

  16. Control rod guide tube wear in operating reactors; operating experience report. Technical report December 1977-December 1979

    International Nuclear Information System (INIS)

    Riggs, R.

    1980-04-01

    Evidence of control rod guide tube wear has been observed in operating pressurized water reactors. The cause of this wear is identified as flow-induced vibration of the control rods. This report describes the measures being taken by both the industry and the NRC to deal with this matter. The staff also presents its technical positions and requirements to support continued operation of the plants as of December 1979 pending completion of this generic effort

  17. Technical planning activity: Final report

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    In April 1985, the US Department of Energy's (DOE's) Office of Fusion Energy commissioned the Technical Planning Activity (TPA). The purpose of this activity was to develop a technical planning methodology and prepare technical plans in support of the strategic and policy framework of the Magnetic Fusion Program Plan issued by DOE in February 1985. Although this report represents the views of only the US magnetic fusion community, it is international in scope in the sense that the technical plans contained herein describe the full scope of the tasks that are prerequisites for the commercialization of fusion energy. The TPA has developed a well-structured methodology that includes detailed definitions of technical issues, definitions of program areas and elements, statements of research and development objectives, identification of key decision points and milestones, and descriptions of facility requirements.

  18. Technical planning activity: Final report

    International Nuclear Information System (INIS)

    1987-01-01

    In April 1985, the US Department of Energy's (DOE's) Office of Fusion Energy commissioned the Technical Planning Activity (TPA). The purpose of this activity was to develop a technical planning methodology and prepare technical plans in support of the strategic and policy framework of the Magnetic Fusion Program Plan issued by DOE in February 1985. Although this report represents the views of only the US magnetic fusion community, it is international in scope in the sense that the technical plans contained herein describe the full scope of the tasks that are prerequisites for the commercialization of fusion energy. The TPA has developed a well-structured methodology that includes detailed definitions of technical issues, definitions of program areas and elements, statements of research and development objectives, identification of key decision points and milestones, and descriptions of facility requirements

  19. TECHNICAL COORDINATION

    CERN Document Server

    A. Ball and W. Zeuner

    2013-01-01

    For the reporting period, the CMS common systems and infrastructure worked well, without failures that caused significant data losses. One more disconnection of the magnet cold box occurred in the shadow of interruptions in data taking, caused by a series of technical faults. The recognition during 2012 that re-connection can only safely be done at around 2 T implies a minimum magnet recovery time of 12 hours and raises serious concerns about the number of ramping cycles of the magnet these incidents cause. This has triggered studies of how to make the cryo-system of the magnet more robust against failures. The proton-proton run ended just before the end-of-year CERN closure, during which CASTOR was installed on the negative end of CMS and both ZDC calorimeters were installed in TAN absorbers the LHC tunnel, in preparation for the heavy-ion run. The installation of CASTOR was an excellent “engineering test” of procedures for working in an activated environment. Despite some technical pr...

  20. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2011-01-01

      Operational experience 2011 CMS is approaching the end of a very successful year of operation. Proton- proton running ended in the late afternoon of 30th October with a stunning 5.73 fb–1 delivered by LHC, of which CMS recorded 5.22 fb–1. During heavy-ion operation, which continues until 7th December, both the accelerator and the CMS detector have also performed very well. Despite the encouraging overall reliability of technical operation, several infrastructure failures which occurred since the last Bulletin are worthy of mention, with one leading for the first time to significant data-loss. On 10th July, a CERN-wide power failure brought down essentially all services including the magnet, due to an MCS setting being left in “manual” after the recent technical stop, but there was no significant damage and the detector was operational before the LHC, despite a slow and tortuous recovery (one of several indications this year that there is room for improve...

  1. Scientific-technical cooperation with foreign (esp. Europe and INSC partner countries) nuclear regulatory authorities and their technical support organizations in the fields of nuclear safety of operating nuclear power plants and on the concept evaluation of generation 3+ plants. Final report

    International Nuclear Information System (INIS)

    Wolff, Holger

    2016-09-01

    The BMUB/BfS-Project 3614I01512 forms the frame of the GRS for the scientific-technical cooperation with Technical Support Organisations and Nuclear Regulatory Authorities in the field of nuclear safety in operating NPPs and for the concept evaluation of generation 3 + plants in Europe and INSC Partner Countries. In the present final project report results are described which were gained within the project duration 15.10.2014 up to the 30.09.2016 in the following working packages: Investigations following the catastrophe of Fukushima Daiichi, Evaluation of selected National Action Plans, DBA and severe accident analyses for NPP with PWR (WWER-440, WWER-1000), cooperation with INSC partner countries on DBA, BDBA and severe accident analyses for WWER plants of generation 3 + and building NRA and safety evaluation capacities and decommissioning of nuclear facilities and disposal of radioactive waste. The results are preceded by an outline on the activities related to the project management and to the planning of the bilateral work.

  2. Nuclear safety assessment of nuclear power plants and nuclear risk in Eastern Europe and other regions. Scientific-technical cooperation with nuclear regulatory authorities and technical support organizations (TSOs); Einschaetzung der nuklearen Sicherheit von Kernkraftwerken sowie nuklearer Risiken in Osteuropa und anderen Regionen. Wissenschaftlich-technische Zusammenarbeit mit atomrechtlichen Behoerden und deren Sachverstaendigenorganisationen (TSO)

    Energy Technology Data Exchange (ETDEWEB)

    Wolff, Holger

    2014-09-15

    The BMUB/BfS project 3611I01512 formed the frame of the GRS for the scientifictechnical cooperation with Technical Support Organisations and Nuclear Regulatory Authorities in the field of nuclear safety of NPPs and for the evaluation of nuclear risks in Eastern Europe and other regions for the period from September 2011 till June 2014. In the present final report main results of the project are described. The project comprised the following technical topics: - Record status of NPP modernisation programs, Monitoring and evaluation of modernisation programs; - Design basis and severe accident analyses for NPP with PWR (WWER-440, WWER-1000); - Cooperation with INSC partner countries on DBA, BDBA and severe accident analyses for WWER plants of generation 3+ and on building NRA and safety evaluation capacities; - Decommissioning of nuclear facilities and disposal of radioactive waste; - Evaluation of new reactor concepts and their safety design; Panels at regulatory level. The work results are preceded by a summary on the activities related to the project management and to the planning of the bilateral work.

  3. Evaluation of using cyclocranes to support drilling and production of oil and gas in wetland areas. Third quarterly technical progress report, First quarter, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Eggington, W.J.

    1993-06-01

    The planned program falls under wetlands area research related to drilling, production, and transportation of oil and gas resources. Specifically the planned program addresses an evaluation of using cyclocraft to transport drill rigs, mud, pipes and other materials and equipment in a cost effective and environmentally safe manner to support oil and gas drilling and production operations in wetland areas. The cyclocraft is a proven hybrid aircraft that utilizes aerostatic and aerodynamic lift. This type of aircraft has considerable payload capacity, VTOL capability, high controllability, low operating cost, low downwash and high safety. The benefits of using a cyclocraft to transport drill rigs and materials over environmentally-sensitive surfaces would be significant. The cyclocraft has considerable cost and operational advantages over the helicopter. The major activity during the report period was focussed on Task 4, Preliminary Design. The selected design has been designated H.1 Cyclocraft by MRC. The preliminary design work was based on the results of the three preceding tasks. A report was initiated that contains descriptions of the H.1 Cyclocraft and its subsystems; options available for the final aircraft design process; performance, geometry, weights and power data; logistics and considerations relating to cyclocraft operations in wetlands.

  4. Men Do Matter: Ethnographic Insights on the Socially Supportive Role of the African American Uncle in the Lives of Inner-City African American Male Youth

    Science.gov (United States)

    Richardson, Joseph B., Jr.

    2009-01-01

    This article examines the role of the African American uncle as a vital yet overlooked form of social support and social capital in the lives of adolescent African American male sons living in single-female-headed households. Research rarely examines the affective roles and functions of men in Black families; moreover, poor urban Black male youth…

  5. A socio-technical analysis of work with ideas in NPD: an industrial case study

    DEFF Research Database (Denmark)

    Gish, Liv; Hansen, Claus Thorp

    2013-01-01

    on piecing together a number of ideas that were developed and disseminated in a large industrial company. We do this through an in-depth case study of the development of the energy-labeled circulation pump Alpha Pro, developed by one of the world’s leading pump manufacturers, Grundfos. Using a socio-technical...... approach, we focus especially on the actors involved and the contextual factors, and less on the detailed development of technical ideas. In our study, we observe that (1) ideas are pieced together from previous ideas and results; (2) ideas are implemented through continuous mobilization of support...... and development of legitimate arguments; and (3) idea work is also a socio-technical process, because contextual factors matter. We observe that idea work is an ongoing process undertaken across different projects, actors, departments, strategies, and visions within Grundfos, while also involving external actors...

  6. The ESO Scientific and Technical Committee.

    Science.gov (United States)

    Léna, P.

    1982-03-01

    Since 1978, the structure of ESO involves a Scientific and Technical Committee (STC) which advises the Council on scientific and technical matters. This committee meets twice a year, usually at Garehing; its members are nominated by the Council and their term is 4 years. The STC has 10 members, who are as evenly distributed as possible among member countries, although indeed mainly chosen for their scientific abilities. The chairman is invited to attend Council meetings and to report to the members.

  7. Technical presentation

    CERN Document Server

    FP Department

    2009-01-01

    07 April 2009 Technical presentation by Leuze Electronics: 14.00 – 15.00, Main Building, Room 61-1-017 (Room A) Photoelectric sensors, data identification and transmission systems, image processing systems. We at Leuze Electronics are "the sensor people": we have been specialising in optoelectronic sensors and safety technology for accident prevention for over 40 years. Our dedicated staff are all highly customer oriented. Customers of Leuze Electronics can always rely on one thing – on us! •\tFounded in 1963 •\t740 employees •\t115 MEUR turnover •\t20 subsidiaries •\t3 production facilities in southern Germany Product groups: •\tPhotoelectric sensors •\tIdentification and measurements •\tSafety devices

  8. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2010-01-01

    Overview Once again, the bulk of this article reviews the intense activity of a recently completed shutdown, which, although quite unforeseeable until a few weeks before it started, proved by its success that our often advertised capability to conduct major maintenance within a two month period is real. Although safely completed, on-time to remarkable precision, the activity was not without incident, and highlighted our dependence on many experienced, specialist teams and their precise choreography. Even after the yoke was safely closed, magnet re-commissioning and beampipe pumpdown showed new and thought-provoking behaviour. The struggle to maintain adequate technical resources will be a pre-occupation over the coming months, in parallel with the start of truly sustained operation, for which various procedures are still being put in place. Planning for future shutdowns must now become a high priority, with many working groups and task forces already in existence to prepare infrastructure improvements and to...

  9. Technical presentation

    CERN Document Server

    FI Department

    2008-01-01

    RADIOSPARES, the leading catalogue distributor of components (electronic, electrical, automation, etc.) and industrial supplies will be at CERN on Friday 3 October 2008 (Main Building, Room B, from 9.00 a.m. to 3.00 p.m.) to introduce its new 2008/2009 catalogue. This will be the opportunity for us to present our complete range of products in more detail: 400 000 part numbers available on our web site (Radiospares France, RS International, extended range of components from other manufacturers); our new services: quotations, search for products not included in the catalogue, SBP products (Small Batch Production: packaging in quantities adapted to customers’ requirements); partnership with our focus manufacturers; demonstration of the on-line purchasing tool implemented on our web site in conjunction with CERN. RADIOSPARES will be accompanied by representatives of FLUKE and TYCO ELECTRONICS, who will make presentations, demonstrate materials and answer any technical questio...

  10. Quark matter

    Energy Technology Data Exchange (ETDEWEB)

    Csernai, L.; Kampert, K. H.

    1994-10-15

    Precisely one decade ago the GSI (Darmstadt)/LBL (Berkeley) Collaboration at the Berkeley Bevalac reported clear evidence for collective sidewards flow in high energy heavy ion collisions. This milestone observation clearly displayed the compression and heating up of nuclear matter, providing new insights into how the behaviour of nuclear matter changes under very different conditions. This year, evidence for azimuthally asymmetric transverse flow at ten times higher projectile energy (11 GeV per nucleon gold on gold collisions) was presented by the Brookhaven E877 collaboration at the recent European Research Conference on ''Physics of High Energy Heavy Ion Collisions'', held in Helsinki from 17-22 June.

  11. Self-compassion matters: The relationships between perceived social support, self-compassion, and subjective well-being among LGB individuals in Turkey.

    Science.gov (United States)

    Toplu-Demirtaş, Ezgi; Kemer, Gülşah; Pope, Amber L; Moe, Jeffry L

    2018-04-01

    Research on the well-being of lesbian, gay, and bisexual (LGB) people has predominately focused on Western (-ized) societies where individualism, and not collectivism, is emphasized. In the present study, we utilized a mediator model via Structural Equation Modeling (SEM) to examine the relationships between self-compassion (i.e., self-kindness, common humanity, and mindfulness), perceived social support (i.e., family, friends, and significant others), and subjective well-being (i.e., life satisfaction, positive affect, and negative affect) in a sample of LGB-identified individuals living in Turkey, a traditionally collectivistic culture (Hofstede, 2001). A sample of 291 LGB individuals (67 lesbian, 128 gay, and 96 bisexual) completed an online survey including the Positive and Negative Affect Schedule, Satisfaction with Life Scale, Multidimensional Scale of Perceived Social Support Scale, and Self-kindness, Common Humanity, and Mindfulness subscales of the Self-Compassion Scale. The results of SEM for the hypothesized mediator model revealed that self-compassion mediated the relationships between perceived social support from family and significant others and subjective well-being, explaining the 77% of the variance in subjective well-being. Implications for the literature base on LGB well-being are discussed, with a focus on the cross-cultural applications. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  12. Securing a better future for all: Nuclear techniques for global development and environmental protection. NA factsheet on nuclear sciences and applications laboratories. Supporting development: R and D, capacity building and technical services

    International Nuclear Information System (INIS)

    2012-01-01

    The system of twelve dedicated IAEA laboratory facilities is a unique feature in the United Nations. The laboratories support and implement programmatic activities that respond to the developmental needs of Member States in food and agriculture, human health, environmental monitoring and assessment, as well as the use of nuclear analytical instruments. The laboratories carry out three essential types of activity, which are simultaneously supported worldwide in Member State laboratories: (i) applied research and development; (ii) training and capacity building and (iii) technical and analytical services. Their primary aim is to assist in increasing the impact of related IAEA programmes. While the laboratories share certain types of activity, their fields of expertise range from food and agriculture, medical dosimetry to the environment and water resources. Most of the laboratories are based in Seibersdorf, a town about 35 km southeast of Vienna. There are five FAO-IAEA agriculture and biotechnology laboratories assisting Member States to develop and adapt new and existing agricultural technologies involving isotopes and radiation to suit local requirements and environmental conditions, and to provide the necessary training and analytical services pertaining to the efficient use of these technologies.

  13. Dark Matter

    Indian Academy of Sciences (India)

    As if this was not enough, it turns out that if our knowledge of ... are thought to contain dark matter, although the evidences from them are the .... protons, electrons, neutrons ... ratio of protons to neutrons was close to unity then as they were in ...

  14. Quantum matter

    International Nuclear Information System (INIS)

    Buechler, Hans Peter; Calcarco, Tommaso; Dressel, Martin

    2008-01-01

    The following topics are dealt with: Artificial atoms and molecules, tailored from solids, fractional flux quanta, molecular magnets, controlled interaction in quantum gases, the theory of quantum correlations in mott matter, cold gases, and mesoscopic systems, Bose-Einstein condensates on the chip, on the route to the quantum computer, a quantum computer in diamond. (HSI)

  15. Molecule Matters

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 14; Issue 4. Molecule Matters – van der Waals Molecules - History and Some Perspectives on Intermolecular Forces. E Arunan. Feature Article Volume 14 Issue 4 April 2009 pp 346-356 ...

  16. Molecule Matters

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 16; Issue 12. Molecule Matters - Dinitrogen. A G Samuelson J Jabadurai. Volume 16 Issue 12 ... Author Affiliations. A G Samuelson1 J Jabadurai1. Department of Inroganic and Physical Chemistry, Indian Institute of Science, Bangalore 560 012, India.

  17. Interstellar matter

    International Nuclear Information System (INIS)

    Mezger, P.G.

    1978-01-01

    An overview of the formation of our galaxy is presented followed by a summary of recent work in star formation and related topics. Selected discussions are given on interstellar matter including absorption characteristics of dust, the fully ionised component of the ISM and the energy density of lyc-photons in the solar neighbourhood and the diffuse galactic IR radiation

  18. Dark Matter

    Indian Academy of Sciences (India)

    The study of gas clouds orbiting in the outer regions of spiral galaxies has revealed that their gravitational at- traction is much larger than the stars alone can provide. Over the last twenty years, astronomers have been forced to postulate the presence of large quantities of 'dark matter' to explain their observations. They are ...

  19. Molecule Matters

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 11; Issue 9. Molecule Matters - A Chromium Compound with a Quintuple Bond. K C Kumara Swamy. Feature Article Volume 11 Issue 9 September 2006 pp 72-75. Fulltext. Click here to view fulltext PDF. Permanent link:

  20. Dark Matter

    International Nuclear Information System (INIS)

    Audouze, J.; Tran Thanh Van, J.

    1988-01-01

    The book begins with the papers devoted to the experimental search of signatures of the dark matter which governs the evolution of the Universe as a whole. A series of contributions describe the presently considered experimental techniques (cryogenic detectors, supraconducting detectors...). A real dialogue concerning these techniques has been instaured between particle physicists and astrophysicists. After the progress report of the particle physicists, the book provides the reader with an updated situation concerning the research in cosmology. The second part of the book is devoted to the analysis of the backgrounds at different energies such as the possible role of the cooling flows in the constitution of massive galactic halos. Any search of dark matter implies necessarily the analysis of the spatial distributions of the large scale structures of the Universe. This report is followed by a series of statistical analyses of these distributions. These analyses concern mainly universes filled up with cold dark matter. The last paper of this third part concerns the search of clustering in the spatial distribution of QSOs. The presence of dark matter should affect the solar neighborhood and related to the existence of galactic haloes. The contributions are devoted to the search of such local dark matter. Primordial nucleosynthesis provides a very powerful tool to set up quite constraining limitations on the overall baryonic density. Even if on takes into account the inhomogeneities in density possibly induced by the Quark-Hadron transition, this baryonic density should be much lower than the overall density deduced from the dynamical models of Universe or the inflationary theories

  1. Biogas and reduction of organic matter in anaerobic reactor with continuous flow means support; Producao de biogas e reducao de materia organica em reatores anaerobicos de fluxo continuo com meio suporte

    Energy Technology Data Exchange (ETDEWEB)

    Kunzler, Kathia Regina; Gomes, Simone Damasceno; Goncalves, Jefferson Luiz; Kuczman, Osvaldo [Universidade Estadual do Oeste do Parana (PGEAGRI/UNIOESTE), Cascavel, PR (Brazil). Programa de Pos-Graduacao em Engenharia Agricola], Emails: kathiark@yahoo.com.br, simoned@unioeste.br; Piana, Pitagoras Augusto [Universidade Estadual do Oeste do Parana (UNIOESTE), Toledo, PR (Brazil)

    2010-07-01

    Starch processing industries are to obtain cassava starch. Its main residue is the effluent resulting from pressing the roots, Manipueira, high organic load and toxic. In this study, we compared the removal efficiency of organic loading and biogas production in anaerobic reactors, with the support means bamboo in different relations width: height. The first lesion diameter of 15 cm and a length of 90 cm, a ratio 1:6 and the second with a diameter of 20 cm and 60 cm long, ratio of 1:3. The support medium consisted of rings of bamboo with 10 cm length and diameters between 1.7 and 2.5 cm. The loads applied were 0.519, 1.156, 1.471, 3.813, 4.347, 4.708 and 5.601gDQO/L.day. To evaluate the removal efficiency of organic matter, the samples were subjected to analysis of DQO biogas production was assessed in terms of organic load removed. Bamboo as a support allowed the application of higher loads. The higher efficiency in the production of biogas was produced in the reactor with the highest ratio width: height, being more significant for the organic load of 5, 601 gCOD/L.day, showing more stability this. (author)

  2. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2012-01-01

      UXC + detectors As explained in detail in the November 2011 bulletin, the bellows unit at −18.5 m from the CMS interaction point was identified as a prime candidate for the regularly occurring pressure spikes which occasionally led to sustained severe background conditions in 2011, affecting dead time and data quality. Similar regions in LHC with vacuum instabilities were observed to be close to bellows, which radiography showed to have distorted RF-fingers — on removal, they proved to have been severely overheated. The plans for the Year-End Technical Stop were adapted to prioritise radiography of the bellows at 16 m to 18 m either end of CMS. Excellent work by the beam pipe, survey and heavy mechanical teams allowed the X-rays to be taken as planned on 20th December, showing that the bellow at −18.5m had an obvious non-conformity. The RF-fingers were found inside the end of the opposing flared pipe instead of outside. In addition, the overlap between fingers and...

  3. Measuring What Matters Workshop Report

    Science.gov (United States)

    2015-01-14

    Measuring What Matters Workshop Report Katie Stewart Julia Allen Michelle Valdez Lisa Young January 2015 TECHNICAL NOTE CMU/SEI-2015-TN...the approach using a simple objective: teaching a child to properly brush his/her teeth. Next, we demonstrate the approach using a cybersecurity...Ensure you child’s teeth are healthy. G1: Ensure your child has everything needed to brush his/her teeth. G2: Ensure your child is brushing his

  4. Disposal Of Waste Matter

    International Nuclear Information System (INIS)

    Kim, Jeong Hyeon; Lee, Seung Mu

    1989-02-01

    This book deals with disposal of waste matter management of soiled waste matter in city with introduction, definition of waste matter, meaning of management of waste matter, management system of waste matter, current condition in the country, collect and transportation of waste matter disposal liquid waste matter, industrial waste matter like plastic, waste gas sludge, pulp and sulfuric acid, recycling technology of waste matter such as recycling system of Black clawson, Monroe and Rome.

  5. Compliance of national radiation protection regulatory infrastructure with international norms: a prerequisite for self-sustainability of technical support organization in a small 'non-nuclear' country: example of Montenegro

    International Nuclear Information System (INIS)

    Jovanovic, Slobodan

    2008-01-01

    Full text: Regulatory control of radiation sources in a country is based upon two essential elements of regulatory infrastructure: national RP legislation system (including nuclear law and subsequent regulations) at one side and institutions regulatory authority (RA) and technical support organizations (TSO) at the other. International norms and standards in radiation protection are (or should be, in principle) transposed through international legal instruments (conventions, treaties, directives, codes) into national regulatory systems, thus making radiation protection regulatory practices standardized and omnipresent. We know, however, that this is often not the case, to more or less extent. More one goes down the pyramid (i.e. from international norms via national regulatory infrastructure to actual RP practice), more there is chance that ultimate/bottom practical actions will not be undertaken properly, or even not at all. One of the key elements in the above mentioned (potentially problematic) RP bottom level is how technical support to regulatory authority is organized. RP legal requirements create a market of services to be effectuated by competent professional organizations, TSO 's. In a small country, there is usually not more than one (if any) of the kind not rarely just surviving at the edge of existence. A TSO scope of RP interests/activities typically include: (1) radiation monitoring and measurements in the environment (air, soil, waters, biota), as well as in public areas, working and living places, (2) personal, workplace and field dosimetry, (3) import, export and trade control of radioactivity in food, forage, construction materials, toys, cosmetics and other goods/consumables, (4) quality control (QC) of radiation sources in medicine, industry, etc., (5) low/medium activity radioactive waste management, (6) transport of radioactive materials, (7) a role in national radiological emergency preparedness and response scheme and (8) advisory services

  6. Technical Support DLA Apparel Research Network

    National Research Council Canada - National Science Library

    Guthrie, Jeffrey

    2002-01-01

    The Defense Logistics Agency's Research and Development Enterprise Division established a network of universities, equipment suppliers, apparel manufacturers, industry consultants and software developers...

  7. Technical Support | Division of Cancer Prevention

    Science.gov (United States)

    To view the live webinar, you will need to have the software, Microsoft Live Meeting, downloaded onto your computer before the event. In most cases, the software will automatically download when you open the program on your system. However, in the event that you need to download it manually, you can access the software at the link below: Download the Microsoft Office Live

  8. Combating Terrorism Technical Support Office. 2008 Review

    Science.gov (United States)

    2009-01-15

    and coordination of necessary law enforcement agencies. The EPT provides real-time visualization of pedestrian movements around and within major...Applied Research Associates, Inc., North Florida Division, Panama City Coda Octopus Inc, St Petersburg Florida Film and Video, St. Petersburg Florida

  9. Technical innovation and management

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Yang Cheol

    1982-08-15

    This book gives explanations of the conception of technical innovation, development plan in Korea, connection between technology and a growth factor in national income, problem of technical innovation in developing country, analysis on cooperation between a developed country and a developing country, evaluation and strategy of technical development in Korea, technical innovation of industry, management of technical industry, analysis of special condition in Korea.

  10. Technical innovation and management

    International Nuclear Information System (INIS)

    Yoon, Yang Cheol

    1982-08-01

    This book gives explanations of the conception of technical innovation, development plan in Korea, connection between technology and a growth factor in national income, problem of technical innovation in developing country, analysis on cooperation between a developed country and a developing country, evaluation and strategy of technical development in Korea, technical innovation of industry, management of technical industry, analysis of special condition in Korea.

  11. Quark matter

    International Nuclear Information System (INIS)

    Csernai, L.; Kampert, K.H.

    1994-01-01

    Precisely one decade ago the GSI (Darmstadt)/LBL (Berkeley) Collaboration at the Berkeley Bevalac reported clear evidence for collective sidewards flow in high energy heavy ion collisions. This milestone observation clearly displayed the compression and heating up of nuclear matter, providing new insights into how the behaviour of nuclear matter changes under very different conditions. This year, evidence for azimuthally asymmetric transverse flow at ten times higher projectile energy (11 GeV per nucleon gold on gold collisions) was presented by the Brookhaven E877 collaboration at the recent European Research Conference on ''Physics of High Energy Heavy Ion Collisions'', held in Helsinki from 17-22 June

  12. ATR Technical Specification Upgrade Program

    International Nuclear Information System (INIS)

    McCracken, R.T.; Durney, J.L.; Freund, G.A.

    1990-01-01

    The Advanced Test Reactor (ATR) is a 250 MW, uranium-aluminum fueled test reactor which began full power operation in 1969. The initial operation was controlled by an Operating Limits document based on the original Safety Analysis Report. Additional safety bases were later developed to support Technical Specifications which were approved and implemented in 1977. The Technical Specifications which were initially developed with content and format specified in ANSI/ANS--15.1, ''The Development of Technical Specifications for Research Reactors.'' The safety basis documentation and the Technical Specifications have been updated as required to maintain them current with the ATR facility configuration. All revisions have been made with a content, format and style consistent with the original. A major, two-phase program to upgrade the content, format and style is in progress. This paper describes the first phase of this program

  13. Elementary process theory: a formal axiomatic system with a potential application as a foundational framework for physics supporting gravitational repulsion of matter and antimatter

    International Nuclear Information System (INIS)

    Cabbolet, M.J.T.F.

    2010-01-01

    Theories of modern physics predict that antimatter having rest mass will be attracted by the earth's gravitational field, but the actual coupling of antimatter with gravitation has not been established experimentally. The purpose of the present research was to identify laws of physics that would govern the universe if antimatter having rest mass would be repulsed by the earth's gravitational field. As a result, a formalized axiomatic system was developed together with interpretation rules for the terms of the language: the intention is that every theorem of the system yields a true statement about physical reality. Seven non-logical axioms of this axiomatic system form the elementary process theory (EPT): this is then a scheme of elementary principles describing the dynamics of individual processes taking place at supersmall scale. It is demonstrated how gravitational repulsion functions in the universe of the EPT, and some observed particles and processes have been formalized in the framework of the EPT. Incompatibility of quantum mechanics (QM) and General Relativity (GR) with the EPT is proven mathematically; to demonstrate applicability to real world problems to which neither QM nor GR applies, the EPT has been applied to a theory of the Planck era of the universe. The main conclusions are that a completely formalized framework for physics has been developed supporting the existence of gravitational repulsion and that the present results give rise to a potentially progressive research program. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  14. LUX-ZEPLIN (LZ) Technical Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Mount, B. J. [Black Hills State Univ., Spearfish, SD (United States); et al.

    2017-03-27

    In this Technical Design Report (TDR) we describe the LZ detector to be built at the Sanford Underground Research Facility (SURF). The LZ dark matter experiment is designed to achieve sensitivity to a WIMP-nucleon spin-independent cross section of three times ten to the negative forty-eighth square centimeters.

  15. Bots mind the social-technical gap

    NARCIS (Netherlands)

    Lee, M.; Frank, L.E.; Beute, F.; de Kort, Y.A.W.; IJsselsteijn, W.A.

    2017-01-01

    Mobile workers experience the social-technical gap when moral dilemmas occur on communication platforms, and technology cannot adapt to social contexts on ethical matters. On messaging applications, bots are non-human team members and/or assistants that can aid mobile workers manage ethical

  16. Management does matter

    DEFF Research Database (Denmark)

    Kroustrup, Jonas

    studies approach the paper acknowledges that management and project management technologies does matter, but comes in many shapes, and is performed differently in various socio-technical settings. The field of STS offers a new ground for a participatory and practice oriented approach to the development......The positivist and managerialist approaches to project management research has historically defined practice as a ‘technical’ discipline. This has recently been challenged by critical project management studies, who advocates for an opening of the field research to also include the social...... and organizational dynamics of projects. Following the topic of the panel this paper will discuss how these two positions, although seemingly different, both places the project manager as an omnipotent subject of control. The consequences becomes either a priori explanations or ideological pitfalls. From a science...

  17. Supplement to a Methodology for Succession Planning for Technical Experts

    Energy Technology Data Exchange (ETDEWEB)

    Kirk, Bernadette Lugue [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Cain, Ronald A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Agreda, Carla L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-11-01

    This report complements A Methodology for Succession Planning for Technical Experts (Ron Cain, Shaheen Dewji, Carla Agreda, Bernadette Kirk, July 2017), which describes a draft methodology for identifying and evaluating the loss of key technical skills at nuclear operations facilities. This report targets the methodology for identifying critical skills, and the methodology is tested through interviews with selected subject matter experts.

  18. Improving artificial breeding of cattle and buffalo in Asia. Guidelines and recommendations. A manual prepared under the framework of an IAEA Technical Cooperation Regional RCA Project on 'Improving Animal Productivity and Reproductive Efficiency', with technical support of the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture

    International Nuclear Information System (INIS)

    2005-11-01

    The International Atomic Energy Agency (IAEA) and the Regional Cooperative Agreement for Asia and the Pacific Region (RCA), with technical support of the Joint FAO/IAEA Programme of Nuclear Techniques in Food and Agriculture, implemented a Technical Cooperation (TC) project entitled Improving Animal Productivity and Reproductive Efficiency. The dual objectives of this project are (a) strengthening and extending the field applications of Urea Molasses Multinutrient Blocks (UMMB) and other feed supplementation strategies, and (b) monitoring and improving the reproductive management and fertility of smallholder dairy cattle subjected to Artificial Insemination (AI). The radioimmunoassay (RIA) for measurement of progesterone in milk and use of the computer database AIDA (Artificial Insemination Database Application) play important roles in the success of the latter objective. The first meeting to plan project activities was held in January 1999 in Yangon, Myanmar and the second meeting to review progress and develop further work plans was held in February 2000 in Kuala Lumpur, Malaysia. The latter meeting concluded that the procedures currently used by different Asian countries for evaluation of breeding bulls should be standardized and unified protocols developed for ensuring quality control of semen during processing, storage and field use. It was recommended that this should be accomplished through a regional workshop of national consultants. A workshop of national consultants from 10 RCA Member States was therefore held in April 2002 in Faisalabad, Pakistan, to consider and discuss the following aspects and arrive at a consensus on the best procedures and practices to be adopted to suit conditions and needs in developing countries of Asia: - Selection, management and health control of AI bulls; - Semen technologies from collection through processing to storage; - Delivery and follow-up of field AI services to farmers The IAEA has also supported a similar project in

  19. The International Technical Safety Forum

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    The International Technical Safety Forum is a meeting of safety experts from several physics labs in Europe and the US. Since 1998 participants have been meeting every couple of years to discuss common challenges in safety matters. The Forum helps them define best practices and learn from the important lessons learned by others.   The Forum's participants in front of building 40. This year, the meeting took place at CERN from 12 to 16 April. “This year's meeting covered subjects ranging from communication and training in matters of safety, to cryogenic safety, emergency preparedness and risk analysis”, explains Ralf Trant, head of the CERN Safety Commission and organiser of this year’s Forum. Radiation protection issues are not discussed at the meeting since they involve different expertise. The goal of the Forum is to allow participants to share experience, learn lessons and acquire specific knowledge in a very open way. Round-table discussions, dedicated time for ...

  20. Web-based modelling of energy, water and matter fluxes to support decision making in mesoscale catchments??the integrative perspective of GLOWA-Danube

    Science.gov (United States)

    Ludwig, R.; Mauser, W.; Niemeyer, S.; Colgan, A.; Stolz, R.; Escher-Vetter, H.; Kuhn, M.; Reichstein, M.; Tenhunen, J.; Kraus, A.; Ludwig, M.; Barth, M.; Hennicker, R.

    The GLOWA-initiative (Global Change of the water cycle), funded by the German Ministry of Research and Education (BMBF), has been established to address the manifold consequences of Global Change on regional water resources in a variety of catchment areas with different natural and cultural characteristics. Within this framework, the GLOWA-Danube project is dealing with the Upper Danube watershed as a representative mesoscale test site (∼75.000 km 2) for mountain-foreland regions in the temperate mid-latitudes. The principle objective is to identify, examine and develop new techniques of coupled distributed modelling for the integration of natural and socio-economic sciences. The transdisciplinary research in GLOWA-Danube develops an integrated decision support system, called DANUBIA, to investigate the sustainability of future water use. GLOWA-Danube, which is scheduled for a total run-time of eight years to operationally implement and establish DANUBIA, comprises a university-based network of experts with water-related competence in the fields of engineering, natural and social sciences. Co-operation with a network of stakeholders in water resources management of the Upper Danube catchment ensures that practical issues and future problems in the water sector of the region can be addressed. In order to synthesize a common understanding between the project partners, a standardized notation of parameters and functions and a platform-independent structure of computational methods and interfaces has been established, by making use of the unified modelling language, an industry standard for the structuring and co-ordination of large projects in software development [Booch et al., The Unified Modelling Language User Guide, Addison-Wesley, Reading, 1999]. DANUBIA is object-oriented, spatially distributed and raster-based at its core. It applies the concept of “proxels” (process pixels) as its basic objects, which have different dimensions depending on the viewing

  1. Media Matter

    Directory of Open Access Journals (Sweden)

    Holger Pötzsch

    2017-02-01

    Full Text Available The present contribution maps materialist advances in media studies. Based on the assumption that matter and materiality constitute significant aspects of communication processes and practices, I introduce four fields of inquiry - technology, political economy, ecology, and the body - and argue that these perspectives enable a more comprehensive understanding of the implications of contemporary technologically afforded forms of interaction. The article shows how each perspective can balance apologetic and apocalyptic approaches to the impact of in particular digital technologies, before it demonstrates the applicability of an integrated framework with reference to the techno-politics of NSA surveillance and the counter-practices of WikiLeaks.

  2. Play Matters

    DEFF Research Database (Denmark)

    Sicart (Vila), Miguel Angel

    ? In Play Matters, Miguel Sicart argues that to play is to be in the world; playing is a form of understanding what surrounds us and a way of engaging with others. Play goes beyond games; it is a mode of being human. We play games, but we also play with toys, on playgrounds, with technologies and design......, but not necessarily fun. Play can be dangerous, addictive, and destructive. Along the way, Sicart considers playfulness, the capacity to use play outside the context of play; toys, the materialization of play--instruments but also play pals; playgrounds, play spaces that enable all kinds of play; beauty...

  3. Life Support Filtration System Trade Study for Deep Space Missions

    Science.gov (United States)

    Agui, Juan H.; Perry, Jay L.

    2017-01-01

    The National Aeronautics and Space Administrations (NASA) technical developments for highly reliable life support systems aim to maximize the viability of long duration deep space missions. Among the life support system functions, airborne particulate matter filtration is a significant driver of launch mass because of the large geometry required to provide adequate filtration performance and because of the number of replacement filters needed to a sustain a mission. A trade analysis incorporating various launch, operational and maintenance parameters was conducted to investigate the trade-offs between the various particulate matter filtration configurations. In addition to typical launch parameters such as mass, volume and power, the amount of crew time dedicated to system maintenance becomes an increasingly crucial factor for long duration missions. The trade analysis evaluated these parameters for conventional particulate matter filtration technologies and a new multi-stage particulate matter filtration system under development by NASAs Glenn Research Center. The multi-stage filtration system features modular components that allow for physical configuration flexibility. Specifically, the filtration system components can be configured in distributed, centralized, and hybrid physical layouts that can result in considerable mass savings compared to conventional particulate matter filtration technologies. The trade analysis results are presented and implications for future transit and surface missions are discussed.

  4. TADS: Technical Assistance Development System.

    Science.gov (United States)

    Epting, Rosemary, Ed.

    Described is the Technical Assistance Development System (TADS), a component of the Frank Porter Graham Child Development Center of the University of North Carolina at Chapel Hill which offers support services to preschool demonstration centers for handicapped children in the First Chance Network. Discussed are the four types of services offered:…

  5. Technical assistance contractor Management Plan

    International Nuclear Information System (INIS)

    1993-09-01

    The Technical Assistance Contractor (TAC) for the Uranium Mill Tailings Remedial Action (UMTRA) Project comprises Jacobs Engineering Group Inc. (JEG) and its major teaming partners [Roy F. Weston, Inc. (RFW), Sergent, Hauskins ampersand Beckwith Agra, Inc. (SHB Agra), and Geraghty ampersand Miller, Inc. (G ampersand M)]. The first three companies have worked together effectively on the UMTRA Project for more than 10 years. With the initiation of the UMTRA Groundwater Project in April 1991, a need arose to increase the TAC's groundwater technical breadth and depth, so G ampersand M was brought in to augment the team's capabilities. The TAC contract's scope is to provide technical, analytical, environmental, engineering, design, inspection, and management support services to the US Department of Energy (DOE) for both surface and groundwater projects. The TAC team continues to support the DOE in completing surface remedial actions and initiating groundwater remediation work for start-up, characterization, design, construction oversight, and remedial operations. A key feature of the TAC's management approach is the extensive set of communication systems implemented for the UMTRA Project. These systems assist all functional disciplines in performing UMTRA Project tasks associated with management, technical support, administrative support, and financial/project controls

  6. Students seeking technical internships as part of an exchange program

    OpenAIRE

    Nystrom, Lynn A.

    2004-01-01

    Virginia Tech students are seeking the support of research centers, academic departments, and area businesses to provide opportunities for technical internships through the International Association for the Exchange of Students for Technical Experience (IAESTE).

  7. Technical Support Organization Knowledge Management for Nuclear Regulatory Support

    International Nuclear Information System (INIS)

    Kohut, P.; Ramsey, J.; Katsenelenbogen, S.

    2016-01-01

    Full text: Knowledge management awareness has increased through the nuclear industrial and regulatory community leading to better understanding of the handling of critical information. Utilizing, managing and regulating the application of nuclear power require an extensive system of expertise and associated research through established organizations. The long term maintenance of the specific expertise is only viable by using scientific knowledge management principles all through the national nuclear infrastructure involving regulatory, industrial, academic and other research institutions. National governments in countries operating or planning to establish nuclear facilities have instituted regulatory regimes on the use of nuclear materials and facilities to insure a high level of operational safety. (author

  8. Innovative technical plasma applications

    International Nuclear Information System (INIS)

    Wintner, E.

    2013-01-01

    Plasma is the predominant status of matter, in stars as well as in interstellar space. In science, it was only recognized rather late as a specific (fourth) state of matter: Sir William Crookes described it in 1879 as “radiant matter”, Irving Langmuir created the name “plasma” in 1928. Technically generated plasma is employed very broadly in modern technology. Some examples are Plasma Displays, Fluorescent Lamps (also the modern Energy Saving Lamps), Corona Discharges (for e.g. Ozone generation, or even engine ignition), arc welding and cutting, reactive ion etching, mass spectroscopy, ion rocket engines and many more. Very early since the development of the laser, it was also employed to generate a plasma (spark) in air or on surfaces. Generally, for this purpose at least ns (“Giant”) pulses have to be used. In more recent times, pico- and femtosecond pulses have allowed to create plasma very easily and effectively. Laser fusion may represent the ultimate application in this direction, based on highly amplified ns pulses for inertial confinement or ps pulses designed as fast igniter. The idea of employing laser pulses for the ignition of engines was attempted for the first time in 1978, although with inadequate tools like the CO2 laser. After a long time of inactivity in this field, about 10 years ago a few institutions like Vienna University of Technology first resumed this approach with the help of modern type solid-state lasers and started systematic investigations around the idea of laser ignition of internal combustion engines. Now, this technique has reached a high degree of maturity; remaining problems lie on the development level and are to be solved soon. Ambitious product development by leading engine producers or ignition equipment suppliers has been started world-wide since several years and, as a result, in one or two years laser ignition will probably be imple-mented into high power gas engines or, somewhat later, high-priced automotive

  9. Seven (and a half) reasons to believe in mirror matter: from neutrino puzzles to the inferred dark matter in the universe

    International Nuclear Information System (INIS)

    Foot, R.

    2001-02-01

    Parity and time reversal are obvious and plausible candidates for fundamental symmetries of nature. Hypothesising that these symmetries exist implies the existence of a new form of matter, called mirror matter. The mirror matter theory (or exact parity model) makes four main predictions: 1) Dark matter in the form of mirror matter should exist in the Universe (i.e. mirror galaxies, stars, planets, meteoroids...), 2) Maximal ordinary neutrino - mirror neutrino oscillations if neutrinos have mass, 3) Orthopositronium should have a shorter effective lifetime than predicted by QED (in 'vacuum' experiments) because of the effects of photon-mirror photon mixing and 4) Higgs production and decay rate should be 50% lower than in the standard model due to Higgs mirror - Higgs mixing (assuming that the separation of the Higgs masses is larger than their decay widths). At the present time there is strong experimental/observational evidence supporting the first three of these predictions, while the fourth one is not tested yet because the Higgs boson, predicted in the standard model of particle physics, is yet to be found. This experimental/observational evidence is rich and varied ranging from the atmospheric and solar neutrino deficits, MACHO gravitational microlensing events, strange properties of extra-solar planets, the existence of 'isolated' planets, orthopositronium lifetime anomaly, Tunguska and other strange 'meteor' events including perhaps, the origin of the moon. The purpose of this article is to provide a not too technical review of these ideas along with some new results

  10. Matter and antimatter

    International Nuclear Information System (INIS)

    Schopper, H.

    1989-01-01

    For many years the physicist Herwig Schopper has been contributing in leading positions - either as director of DESY in Hamburg or as general director of CERN in Geneva - to the development of a fascinating field of modern physics. His book is the first comprehensive presentation of experimental particle physics for non-physicists. The search for the smallest constituents of matter, i.e. the exploration of the microcosmos, apart from the advance of the man into space belongs to the most exciting scientific-technical adventures of our century. Contrarily to the stars, atoms, atomic nuclei, and quarks cannot be seen. How objects are studied which are by thousands smaller than the smallest atomic nucleus? Can matter be decomposed in ever smaller constituents, or does there exist a limit? What is matter, and what is of consequence for the mysterious antimatter. Do the laws of the infinitely small also determine the development of the universe since its origin? Such and other questions - expressions of human curiosity - Schopper wants to answer with his generally understandable book. Thereby the 'machines' and the experiments of high-energy physics play a decicive role in the presentation. The author describes the development of the accelerators - in Europe, as well as in the Soviet Union, Japan, or in the USA -, and he shows, why for the investigation of the smallest immense experimental facilities - the 1989 finished LEP storage ring at CERN has a circumference of 27 kilometers - are necessary. Schopper explains how the 'machines' work and how the single experiments run. His book satisfies the curiosity of all those, who want to know more about the world of the quarks. (orig.) With 96 figs [de

  11. International technical assistance example. Consortium action in Bulgaria

    International Nuclear Information System (INIS)

    Mattei, J.M.; Milhem, J.L.

    1993-03-01

    The safety status achieved last year at the Kozloduy Nuclear Power Plant (NPP) and the capability of the Bulgarian Nuclear Safety Authority (BNSA) to assess the safety of the plant and the adequacy of proposed improvements have been matters of international concern. However, the Kozloduy NPP contributes 35-40 per cent of the electrical generating capacity in Bulgaria. For further operation of the plants, it is therefore, essential that safety is improved. In july 1991, the Commission of the European Communities (CEC) instituted a Six Months Emergency Action Programme for Bulgaria under the PHARE regional nuclear safety programme. The programme consisted of three parts: - an industrial emergency programme supporting the utility of the Kozloduy NPP, - a study to evaluate Bulgaria's electricity needs, - technical assistance for reinforcement of the Bulgarian Nuclear Safety Authority. For the third part, complementary to the industrial emergency programme carried out by the WANO (World Association of Nuclear Operators), a Consortium of expert institutions and regulatory from EC member states was established by CEC for assistance to BNSA. The Consortium consisted of: - Institut de Protection et de Surete Nucleaire (IPSN), France, technical support of the French regulatory body, - Gesellschaft fur Anlagen und Reaktorsicherheit (GRS) mbH, Germany, an organization in safety engineering, technical support of governmental regulatory body, - AIB-Vincotte Nuclear (AVN), Belgium, the organization authorized by the Belgian Government for licensing and inspection of nuclear power plants, - UK Atomic Energy Authority (AEA Technology), an independent UK Government owned nuclear R and D and consultancy organization, - Nuclear Installations Inspectorate (NII) of the Health and Safety Executive, United Kingdom, the nuclear regulatory body for the United Kingdom

  12. Reader-Centered Technical Writing

    Science.gov (United States)

    Narayanan, M.

    2012-12-01

    Technical writing is an essential part of professional communication and in recent years it has shifted from a genre-based approach. Formerly, technical writing primarily focused on generating templates of documents and sometimes it was creating or reproducing traditional forms with minor modifications and updates. Now, technical writing looks at the situations surrounding the need to write. This involves deep thinking about the goals and objectives of the project on hand. Furthermore, one observes that it is very important for any participatory process to have the full support of management. This support needs to be well understood and believed by employees. Professional writing may be very persuasive in some cases. When presented in the appropriate context, technical writing can persuade a company to improve work conditions ensuring employee safety and timely production. However, one must recognize that lot of professional writing still continues to make use of reports and instruction manuals. Normally, technical and professional writing addresses four aspects. Objective: The need for generating a given professionally written technical document and the goals the document is expected to achieve and accomplish. Clientele: The clientele who will utilize the technical document. This may include the people in the organization. This may also include "unintended readers." Customers: The population that may be affected by the content of the technical document generated. This includes the stakeholders who will be influenced. Environment: The background in which the document is created. Also, the nature of the situation that warranted the generation of the document. Swiss Psychologist Jean Piaget's view of Learning focuses on three aspects. The author likes to extend Jean Piaget's ideas to students, who are asked to prepare and submit Reader-Centered Technical Writing reports and exercises. Assimilation: Writers may benefit specifically, by assimilating a new object into

  13. Marginal Matter

    Science.gov (United States)

    van Hecke, Martin

    2013-03-01

    All around us, things are falling apart. The foam on our cappuccinos appears solid, but gentle stirring irreversibly changes its shape. Skin, a biological fiber network, is firm when you pinch it, but soft under light touch. Sand mimics a solid when we walk on the beach but a liquid when we pour it out of our shoes. Crucially, a marginal point separates the rigid or jammed state from the mechanical vacuum (freely flowing) state - at their marginal points, soft materials are neither solid nor liquid. Here I will show how the marginal point gives birth to a third sector of soft matter physics: intrinsically nonlinear mechanics. I will illustrate this with shock waves in weakly compressed granular media, the nonlinear rheology of foams, and the nonlinear mechanics of weakly connected elastic networks.

  14. Fifty years of Technical Cooperation

    International Nuclear Information System (INIS)

    2007-01-01

    The International Atomic Energy Agency (IAEA) was established in Vienna in 1957. The Statute of the IAEA, approved by 81 nations, founded the organization on three pillars: nuclear verification; safety and security; and the transfer of technology. Today, these three pillars still remain at the heart of the organization's work. However, the way in which the IAEA carries out this work, particularly with regard to technology transfer, has changed greatly over the years. When the IAEA opened for business, nuclear science and technology were in their infancy. Many Member States had no nuclear capacity at all. The IAEA's 'technical assistance' programme, as it was then known, was modest. Early projects were small in scale and short lived, focusing mainly on building human capacities and creating institutions and facilities that would support the introduction of nuclear technology in a safe and effective manner. Today, the picture is more complex. Instead of merely offering assistance, the IAEA focuses on cooperation for sustainable socioeconomic development, building on the skills and infrastructure that Member States have acquired over the past five decades. Member States are full partners in the process, guiding the IAEA's technical cooperation activities, setting national and regional priorities, and offering training opportunities and technical support to the IAEA and to other Member States. Technical cooperation between developing countries is facilitated and supported through regional cooperative agreements. Regional centres of expertise play an important role in sharing the benefits of nuclear science and technology among Member States

  15. Strategy of technical innovation

    International Nuclear Information System (INIS)

    Lee, Ga Jong

    1990-12-01

    This book deals with policy of scientific technique and technical innovation such as research for development and types of technical innovation, historical development and process of technical innovation, economic growth, technology change and investment for research and development, structure and form of technical transfer with the meaning process, from, structure and theory, economic growth and investment of research and development with experiential analysis and case study on strategy of technical innovation in electron and fine chemical industry.

  16. 76 FR 60017 - Technical Conference on Penalty Guidelines; Notice of Technical Conference on Penalty Guidelines

    Science.gov (United States)

    2011-09-28

    ... Conference on Penalty Guidelines; Notice of Technical Conference on Penalty Guidelines The staff of the... the Penalty Guidelines, which the Commission issued on September 17, 2010.\\1\\ The conference will be... impact of the Penalty Guidelines on compliance and enforcement matters. More information on the topics to...

  17. Cosmology and Dark Matter

    CERN Document Server

    Tkachev, Igor

    2017-01-01

    This lecture course covers cosmology from the particle physicist perspective. Therefore, the emphasis will be on the evidence for the new physics in cosmological and astrophysical data together with minimal theoretical frameworks needed to understand and appreciate the evidence. I review the case for non-baryonic dark matter and describe popular models which incorporate it. In parallel, the story of dark energy will be developed, which includes accelerated expansion of the Universe today, the Universe origin in the Big Bang, and support for the Inflationary theory in CMBR data.

  18. FLAMMABLE GAS TECHNICAL BASIS DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    KRIPPS, L.J.

    2005-03-03

    This document describes the qualitative evaluation of frequency and consequences for DST and SST representative flammable gas accidents and associated hazardous conditions without controls. The evaluation indicated that safety-significant structures, systems and components (SSCs) and/or technical safety requirements (TSRs) were required to prevent or mitigate flammable gas accidents. Discussion on the resulting control decisions is included. This technical basis document was developed to support WP-13033, Tank Farms Documented Safety Analysis (DSA), and describes the risk binning process for the flammable gas representative accidents and associated represented hazardous conditions. The purpose of the risk binning process is to determine the need for safety-significant structures, systems, and components (SSC) and technical safety requirement (TSR)-level controls for a given representative accident or represented hazardous condition based on an evaluation of the event frequency and consequence.

  19. LLNL 1981: technical horizons

    International Nuclear Information System (INIS)

    1981-07-01

    Research programs at LLNL for 1981 are described in broad terms. In his annual State of the Laboratory address, Director Roger Batzel projected a $481 million operating budget for fiscal year 1982, up nearly 13% from last year. In projects for the Department of Energy and the Department of Defense, the Laboratory applies its technical facilities and capabilities to nuclear weapons design and development and other areas of defense research that include inertial confinement fusion, nonnuclear ordnances, and particle-beam technology. LLNL is also applying its unique experience and capabilities to a variety of projects that will help the nation meet its energy needs in an environmentally acceptable manner. A sampling of recent achievements by LLNL support organizations indicates their diversity

  20. SUPPLEMENTAL COLUMBIA RIVER PROTECTION ACTIVITIES AT THE DEPARTMENT OF ENERGY HANFORD SITE: 2006 TECHNICAL PEER REVIEW

    International Nuclear Information System (INIS)

    Looney, B; Dawn Kaback; Gene Leboeuf; Jason Mulvihill-Kuntz; Lynn Lefkoff

    2006-01-01

    Prompted by a $10 million Congressional allocation to identify supplemental actions to protect the Columbia River from groundwater contamination beneath the Hanford Reservation, the U. S. Department of Energy (DOE) Environmental Management (EM) Office of Clean-up Technology identified twenty-three potential technical projects and then down-selected ten of these for further evaluation. An independent expert peer review was conducted for the ten down-selected proposals. The review panel consisted of twenty-three recognized subject matter experts that broadly represented academia, industry, and federal laboratories. Of the initial ten proposals reviewed, one was given unconditional support, six were given conditional support, and three were not supported as proposed. Three additional proposals were then submitted by DOE for review--these proposals were structured, in part, to respond to the initial round of technical peer review comments. Peer reviews of these additional proposals provided conditional support. For those proposals that received conditional support, DOE requested specific implementation and work plans and assessed whether the plans adequately addressed the technical conditions identified by the review panel. The final list of technology proposals receiving support, or conditional support, primarily focused on understanding and reducing the potential impacts of uranium, chromium, and strontium from facilities adjacent to the Columbia River, with a secondary focus on understanding and limiting the future Columbia River impacts from the large carbon tetrachloride groundwater plume underlying and downgradient of the Hanford Central Plateau facilities. The results and recommendations of the peer reviews informed the final DOE project selections and supported implementation of the selected projects to protect the Columbia River and address groundwater contamination at Hanford

  1. SUPPLEMENTAL COLUMBIA RIVER PROTECTION ACTIVITIES AT THE DEPARTMENT OF ENERGY HANFORD SITE: 2006 TECHNICAL PEER REVIEW

    Energy Technology Data Exchange (ETDEWEB)

    Looney, B; Dawn Kaback; Gene Leboeuf; Jason Mulvihill-Kuntz; Lynn Lefkoff

    2006-12-20

    Prompted by a $10 million Congressional allocation to identify supplemental actions to protect the Columbia River from groundwater contamination beneath the Hanford Reservation, the U. S. Department of Energy (DOE) Environmental Management (EM) Office of Clean-up Technology identified twenty-three potential technical projects and then down-selected ten of these for further evaluation. An independent expert peer review was conducted for the ten down-selected proposals. The review panel consisted of twenty-three recognized subject matter experts that broadly represented academia, industry, and federal laboratories. Of the initial ten proposals reviewed, one was given unconditional support, six were given conditional support, and three were not supported as proposed. Three additional proposals were then submitted by DOE for review--these proposals were structured, in part, to respond to the initial round of technical peer review comments. Peer reviews of these additional proposals provided conditional support. For those proposals that received conditional support, DOE requested specific implementation and work plans and assessed whether the plans adequately addressed the technical conditions identified by the review panel. The final list of technology proposals receiving support, or conditional support, primarily focused on understanding and reducing the potential impacts of uranium, chromium, and strontium from facilities adjacent to the Columbia River, with a secondary focus on understanding and limiting the future Columbia River impacts from the large carbon tetrachloride groundwater plume underlying and downgradient of the Hanford Central Plateau facilities. The results and recommendations of the peer reviews informed the final DOE project selections and supported implementation of the selected projects to protect the Columbia River and address groundwater contamination at Hanford.

  2. Baryonic matter and beyond

    OpenAIRE

    Fukushima, Kenji

    2014-01-01

    We summarize recent developments in identifying the ground state of dense baryonic matter and beyond. The topics include deconfinement from baryonic matter to quark matter, a diquark mixture, topological effect coupled with chirality and density, and inhomogeneous chiral condensates.

  3. Silicon quantum dots: surface matters

    Czech Academy of Sciences Publication Activity Database

    Dohnalová, K.; Gregorkiewicz, T.; Kůsová, Kateřina

    2014-01-01

    Roč. 26, č. 17 (2014), 1-28 ISSN 0953-8984 R&D Projects: GA ČR GPP204/12/P235 Institutional support: RVO:68378271 Keywords : silicon quantum dots * quantum dot * surface chemistry * quantum confinement Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.346, year: 2014

  4. Front Matter

    Directory of Open Access Journals (Sweden)

    HLRC Editor

    2016-08-01

    Full Text Available Higher Learning Research Communications (HLRC, ISSN: 2157-6254 [Online] is published collaboratively by Walden University (USA, Universidad Andrés Bello (Chile, Universidad Europea de Madrid (Spain and Istanbul Bilgi University (Turkey. Written communication to HLRC should be addressed to the office of the Executive Director at Laureate Education, Inc. 701 Brickell Ave Ste. 1700, Miami, FL 33131, USA. HLRC is designed for open access and online distribution through www.hlrcjournal.com. The views and statements expressed in this journal do not necessarily reflect the views of Laureate Education, Inc. or any of its affiliates (collectively “Laureate”. Laureate does not warrant the accuracy, reliability, currency or completeness of those views or statements and does not accept any legal liability arising from any reliance on the views, statements and subject matter of the journal. Acknowledgements The Guest Editors gratefully acknowledge the substantial contribution of the readers for the blind peer review of essays submitted for this special issue as exemplars of individuals from around the world who have come together in a collective endeavor for the common good: Robert Bringle (Indiana University Purdue University Indianapolis, US, Linda Buckley (University of the Pacific, US, Guillermo Calleja (Universidad Rey Juan Carlos, Spain, Eva Egron-Polak (International Association of Universities, France, Heather Friesen (Abu Dhabi University, UAE, Saran Gill (National University of Malaysia, Malaysia, Chester Haskell (higher education consultant, US, Kanokkarn Kaewnuch (National Institute for Development Administration, Thailand, Gil Latz (Indiana University Purdue University Indianapolis, US, Molly Lee (higher education consultant, Malaysia, Deane Neubauer (East-West Center at University of Hawaii, US, Susan Sutton (Bryn Mawr College, US, Francis Wambalaba (United States International University, Kenya, and Richard Winn (higher education

  5. Management matters.

    Science.gov (United States)

    Gould, Rebecca A; Canter, Deborah

    2008-11-01

    Fewer than 50% of registered dietitians (RDs) supervise personnel and 76% have no budget authority. Because higher salaries are tied to increasing levels of authority and responsibility, RDs must seek management and leadership roles to enjoy the increased remuneration tied to such positions. Advanced-level practice in any area of dietetics demands powerful communication abilities, proficiency in budgeting and finance, comfort with technology, higher-order decision-making/problem-solving skills, and well-honed human resource management capabilities, all foundational to competent management practice. As RDs envision the future of the dietetics profession, practitioners must evaluate management competence in both hard and soft skills. Just as research is needed to support evidenced-based clinical practice, the same is needed to support management practice across the profession. Dietetics educators and preceptors should be as enthusiastic about management practice as they are clinical practice when educating and mentoring future professionals. Such encouragement and support can mean that new RDs and dietetic technicians, registered, will understand what it takes to advance to higher levels of responsibility, authority, and subsequent enhanced remuneration. In the ever-changing social, legal, ethical, political, economic, technological, and ecological environments of work, food and nutrition professionals who are willing to step forward and assume the risks and responsibilities of management also will share in the rewards, and propel the profession to new heights of recognition and respect.

  6. Technical Assistance Plan (TAP)

    Science.gov (United States)

    A Technical Assistance Plan (TAP) enables community groups to retain the services of an independent technical advisor and to provide resources for a community group to help inform other community members about site decisions.

  7. Technical report writing

    Science.gov (United States)

    Vidoli, Carol A.

    1992-01-01

    This manual covers the fundamentals of organizing, writing, and reviewing NASA technical reports. It was written to improve the writing skills of LeRC technical authors and the overall quality of their reports.

  8. Technical Report Writing Today

    DEFF Research Database (Denmark)

    Riordan, Daniel G.

    2014-01-01

    Section 1: Technical Communication Basics (8 chapters on tech com, audiences, tech com process, tech com style, researching, designing pages, using visual aids, describing). Section 2: Technical Communication Applications (7 chapters on sets of instructions, informal reports and email, developing...

  9. Technical training: places available

    CERN Document Server

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  10. Technical training - places available

    CERN Document Server

    2013-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  11. Technical training: places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tél : 74924)  

  12. VANDAL technical overview

    International Nuclear Information System (INIS)

    Unsworth, M.D.

    1989-07-01

    This document is concerned with the technicalities of the VANDAL code and covers the technical details of each of the systems modules in turn. Covered are SAMPLING, FLOW, VAULT, GEOSPHERE, BIOSPHERE and TIMESTEPPING. (author)

  13. Technical training: places available

    CERN Multimedia

    2014-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  14. Technical training: places available

    CERN Multimedia

    2014-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Marie Lahchimi, Technical Training Administration (Tel: 74924)

  15. 7 CFR 652.4 - Technical service standards.

    Science.gov (United States)

    2010-01-01

    ... technologies and practices. (c) A technical service provider must assume responsibility in writing for the... 7 Agriculture 6 2010-01-01 2010-01-01 false Technical service standards. 652.4 Section 652.4..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.4...

  16. 1980 Annual status report: provision of scientific and technical services

    International Nuclear Information System (INIS)

    1981-01-01

    Two kinds of objectives are pursued at the JRC in direct support of the various General Directorates of the Commission: Technical Evaluations where system analysis techniques are mainly employed and Technical Assistance where laboratory measurement, technical expertises and management of projects are provided

  17. Handbook of Technical Communication

    OpenAIRE

    Mehler , Alexander; Romary , Laurent; Gibbon , Dafydd

    2012-01-01

    International audience; The handbook "Technical Communication" brings together a variety of topics which range from the role of technical media in human communication to the linguistic, multimodal enhancement of present-day technologies. It covers the area of computer-mediated text, voice and multimedia communication as well as of technical documentation. In doing so, the handbook takes professional and private communication into account. Special emphasis is put on technical communication bas...

  18. Dark matter in spiral galaxies

    International Nuclear Information System (INIS)

    Albada, T.S. van; Sancisi, R.

    1986-01-01

    Mass models of spiral galaxies based on the observed light distribution, assuming constant M/L for bulge and disc, are able to reproduce the observed rotation curves in the inner regions, but fail to do so increasingly towards and beyond the edge of the visible material. The discrepancy in the outer region can be accounted for by invoking dark matter; some galaxies require at least four times as much dark matter as luminous matter. There is no evidence for a dependence on galaxy luminosity or morphological type. Various arguments support the idea that a distribution of visible matter with constant M/L is responsible for the circular velocity in the inner region, i.e. inside approximately 2.5 disc scalelengths. Luminous matter and dark matter seem to 'conspire' to produce the flat observed rotation curves in the outer region. It seems unlikely that this coupling between disc and halo results from the large-scale gravitational interaction between the two components. Attempts to determine the shape of dark halos have not yet produced convincing results. (author)

  19. Size matter!

    DEFF Research Database (Denmark)

    Hansen, Pelle Guldborg; Jespersen, Andreas Maaløe; Skov, Laurits Rhoden

    2015-01-01

    trash bags according to size of plates and weighed in bulk. Results Those eating from smaller plates (n=145) left significantly less food to waste (aver. 14,8g) than participants eating from standard plates (n=75) (aver. 20g) amounting to a reduction of 25,8%. Conclusions Our field experiment tests...... the hypothesis that a decrease in the size of food plates may lead to significant reductions in food waste from buffets. It supports and extends the set of circumstances in which a recent experiment found that reduced dinner plates in a hotel chain lead to reduced quantities of leftovers....

  20. Technical Insights for Saltstone PA Maintenance

    Energy Technology Data Exchange (ETDEWEB)

    Flach, G.; Sarkar, S.; Mahadevan, S.; Kosson, D.

    2011-07-20

    The Cementitious Barriers Partnership (CBP) is a collaborative program sponsored by the US DOE Office of Waste Processing. The objective of the CBP is to develop a set of computational tools to improve understanding and prediction of the long-term structural, hydraulic, and chemical performance of cementitious barriers and waste forms used in nuclear applications. CBP tools are expected to better characterize and reduce the uncertainties of current methodologies for assessing cementitious barrier performance and increase the consistency and transparency of the assessment process, as the five-year program progresses. In September 2009, entering its second year of funded effort, the CBP sought opportunities to provide near-term tangible support to DOE Performance Assessments (PAs). The Savannah River Saltstone Disposal Facility (SDF) was selected for the initial PA support effort because (1) cementitious waste forms and barriers play a prominent role in the performance of the facility, (2) certain important long-term behaviors of cementitious materials composing the facility are uncertain, (3) review of the SDF PA by external stakeholders is ongoing, and (4) the DOE contractor responsible for the SDF PA is open to receiving technical assistance from the CBP. A review of the current (SRR Closure & Waste Disposal Authority 2009) and prior Saltstone PAs (e.g., Cook et al. 2005) suggested five potential opportunities for improving predictions. The candidate topics considered were (1) concrete degradation from external sulfate attack, (2) impact of atmospheric exposure to concrete and grout before closure, such as accelerated slag and Tc-99 oxidation, (3) mechanistic prediction of geochemical conditions, (4) concrete degradation from rebar corrosion due to carbonation, and (5) early age cracking from drying and/or thermal shrinkage. The candidate topics were down-selected considering the feasibility of addressing each issue within approximately six months, and