#### Sample records for matrix-free interior point

1. Interior point algorithms theory and analysis

CERN Document Server

Ye, Yinyu

2011-01-01

The first comprehensive review of the theory and practice of one of today's most powerful optimization techniques. The explosive growth of research into and development of interior point algorithms over the past two decades has significantly improved the complexity of linear programming and yielded some of today's most sophisticated computing techniques. This book offers a comprehensive and thorough treatment of the theory, analysis, and implementation of this powerful computational tool. Interior Point Algorithms provides detailed coverage of all basic and advanced aspects of the subject.

2. PCX, Interior-Point Linear Programming Solver

International Nuclear Information System (INIS)

Czyzyk, J.

2004-01-01

1 - Description of program or function: PCX solves linear programming problems using the Mehrota predictor-corrector interior-point algorithm. PCX can be called as a subroutine or used in stand-alone mode, with data supplied from an MPS file. The software incorporates modules that can be used separately from the linear programming solver, including a pre-solve routine and data structure definitions. 2 - Methods: The Mehrota predictor-corrector method is a primal-dual interior-point method for linear programming. The starting point is determined from a modified least squares heuristic. Linear systems of equations are solved at each interior-point iteration via a sparse Cholesky algorithm native to the code. A pre-solver is incorporated in the code to eliminate inefficiencies in the user's formulation of the problem. 3 - Restriction on the complexity of the problem: There are no size limitations built into the program. The size of problem solved is limited by RAM and swap space on the user's computer

3. Interior point decoding for linear vector channels

International Nuclear Information System (INIS)

2008-01-01

In this paper, a novel decoding algorithm for low-density parity-check (LDPC) codes based on convex optimization is presented. The decoding algorithm, called interior point decoding, is designed for linear vector channels. The linear vector channels include many practically important channels such as inter-symbol interference channels and partial response channels. It is shown that the maximum likelihood decoding (MLD) rule for a linear vector channel can be relaxed to a convex optimization problem, which is called a relaxed MLD problem

4. Interior point decoding for linear vector channels

Energy Technology Data Exchange (ETDEWEB)

Wadayama, T [Nagoya Institute of Technology, Gokiso, Showa-ku, Nagoya, Aichi, 466-8555 (Japan)], E-mail: wadayama@nitech.ac.jp

2008-01-15

In this paper, a novel decoding algorithm for low-density parity-check (LDPC) codes based on convex optimization is presented. The decoding algorithm, called interior point decoding, is designed for linear vector channels. The linear vector channels include many practically important channels such as inter-symbol interference channels and partial response channels. It is shown that the maximum likelihood decoding (MLD) rule for a linear vector channel can be relaxed to a convex optimization problem, which is called a relaxed MLD problem.

5. Optimal Power Flow by Interior Point and Non Interior Point Modern Optimization Algorithms

Directory of Open Access Journals (Sweden)

Marcin Połomski

2013-03-01

Full Text Available The idea of optimal power flow (OPF is to determine the optimal settings for control variables while respecting various constraints, and in general it is related to power system operational and planning optimization problems. A vast number of optimization methods have been applied to solve the OPF problem, but their performance is highly dependent on the size of a power system being optimized. The development of the OPF recently has tracked significant progress both in numerical optimization techniques and computer techniques application. In recent years, application of interior point methods to solve OPF problem has been paid great attention. This is due to the fact that IP methods are among the fastest algorithms, well suited to solve large-scale nonlinear optimization problems. This paper presents the primal-dual interior point method based optimal power flow algorithm and new variant of the non interior point method algorithm with application to optimal power flow problem. Described algorithms were implemented in custom software. The experiments show the usefulness of computational software and implemented algorithms for solving the optimal power flow problem, including the system model sizes comparable to the size of the National Power System.

6. Interior-Point Methods for Linear Programming: A Review

Science.gov (United States)

Singh, J. N.; Singh, D.

2002-01-01

The paper reviews some recent advances in interior-point methods for linear programming and indicates directions in which future progress can be made. Most of the interior-point methods belong to any of three categories: affine-scaling methods, potential reduction methods and central path methods. These methods are discussed together with…

7. Primal-Dual Interior Point Multigrid Method for Topology Optimization

Czech Academy of Sciences Publication Activity Database

Kočvara, Michal; Mohammed, S.

2016-01-01

Roč. 38, č. 5 (2016), B685-B709 ISSN 1064-8275 Grant - others:European Commission - EC(XE) 313781 Institutional support: RVO:67985556 Keywords : topology optimization * multigrid method s * interior point method Subject RIV: BA - General Mathematics Impact factor: 2.195, year: 2016 http://library.utia.cas.cz/separaty/2016/MTR/kocvara-0462418.pdf

8. Interior Point Methods for Large-Scale Nonlinear Programming

Czech Academy of Sciences Publication Activity Database

2005-01-01

Roč. 20, č. 4-5 (2005), s. 569-582 ISSN 1055-6788 R&D Projects: GA AV ČR IAA1030405 Institutional research plan: CEZ:AV0Z10300504 Keywords : nonlinear programming * interior point methods * KKT systems * indefinite preconditioners * filter methods * algorithms Subject RIV: BA - General Mathematics Impact factor: 0.477, year: 2005

9. Primal Interior Point Method for Minimization of Generalized Minimax Functions

Czech Academy of Sciences Publication Activity Database

2010-01-01

Roč. 46, č. 4 (2010), s. 697-721 ISSN 0023-5954 R&D Projects: GA ČR GA201/09/1957 Institutional research plan: CEZ:AV0Z10300504 Keywords : unconstrained optimization * large-scale optimization * nonsmooth optimization * generalized minimax optimization * interior-point methods * modified Newton methods * variable metric methods * global convergence * computational experiments Subject RIV: BA - General Mathematics Impact factor: 0.461, year: 2010 http://dml.cz/handle/10338.dmlcz/140779

10. Multiperiod hydrothermal economic dispatch by an interior point method

Directory of Open Access Journals (Sweden)

Kimball L. M.

2002-01-01

Full Text Available This paper presents an interior point algorithm to solve the multiperiod hydrothermal economic dispatch (HTED. The multiperiod HTED is a large scale nonlinear programming problem. Various optimization methods have been applied to the multiperiod HTED, but most neglect important network characteristics or require decomposition into thermal and hydro subproblems. The algorithm described here exploits the special bordered block diagonal structure and sparsity of the Newton system for the first order necessary conditions to result in a fast efficient algorithm that can account for all network aspects. Applying this new algorithm challenges a conventional method for the use of available hydro resources known as the peak shaving heuristic.

11. Primal Interior-Point Method for Large Sparse Minimax Optimization

Czech Academy of Sciences Publication Activity Database

2009-01-01

Roč. 45, č. 5 (2009), s. 841-864 ISSN 0023-5954 R&D Projects: GA AV ČR IAA1030405; GA ČR GP201/06/P397 Institutional research plan: CEZ:AV0Z10300504 Keywords : unconstrained optimization * large-scale optimization * minimax optimization * nonsmooth optimization * interior-point methods * modified Newton methods * variable metric methods * computational experiments Subject RIV: BA - General Mathematics Impact factor: 0.445, year: 2009 http://dml.cz/handle/10338.dmlcz/140034

12. A superlinear interior points algorithm for engineering design optimization

Science.gov (United States)

Herskovits, J.; Asquier, J.

1990-01-01

We present a quasi-Newton interior points algorithm for nonlinear constrained optimization. It is based on a general approach consisting of the iterative solution in the primal and dual spaces of the equalities in Karush-Kuhn-Tucker optimality conditions. This is done in such a way to have primal and dual feasibility at each iteration, which ensures satisfaction of those optimality conditions at the limit points. This approach is very strong and efficient, since at each iteration it only requires the solution of two linear systems with the same matrix, instead of quadratic programming subproblems. It is also particularly appropriate for engineering design optimization inasmuch at each iteration a feasible design is obtained. The present algorithm uses a quasi-Newton approximation of the second derivative of the Lagrangian function in order to have superlinear asymptotic convergence. We discuss theoretical aspects of the algorithm and its computer implementation.

13. Arc-Search Infeasible Interior-Point Algorithm for Linear Programming

OpenAIRE

Yang, Yaguang

2014-01-01

Mehrotra's algorithm has been the most successful infeasible interior-point algorithm for linear programming since 1990. Most popular interior-point software packages for linear programming are based on Mehrotra's algorithm. This paper proposes an alternative algorithm, arc-search infeasible interior-point algorithm. We will demonstrate, by testing Netlib problems and comparing the test results obtained by arc-search infeasible interior-point algorithm and Mehrotra's algorithm, that the propo...

14. INTERIORITY

DEFF Research Database (Denmark)

Hvejsel, Marie Frier

Dealing with the general theme of domestic architectural quality, the PhD thesis ‘INTERIORITY’ takes its point of departure in the continuous and increasing need to improve our capability as architects to theoretically articulate the intangible concept of quality, and to reveal it through an active...... been motivated by the particular hypothesis that an introduction of the notion of interiority, as an ability of the spatial envelope itself to address the sensuous scale of furniture, unfolds a particular dual critical potential signifying our experience of domestic architectural quality: On the one......, tectonically. Hence, it has been a particular idea of the study to explore the relation between furniture, the spatial envelope itself, and its construct by using furniture as an architectural concept. Consequently, the thesis has specifically investigated whether this notion of interiority, describing...

15. Komputasi Aliran Daya Optimal Sistem Tenaga Skala Besar dengan Metode Primal Dual Interior Point

Directory of Open Access Journals (Sweden)

Syafii Syafii

2016-03-01

Full Text Available This paper focuses on the use of Primal Dual Interior Point method in the analysis of optimal power flow. Optimal power flow analysis with Primal Dual Interior Point method then compared with Linear Programming Method using Matpower program. The simulation results show that the computation results of Primal Dual Interior Point similar with Linear Programming Method for total cost of generation and large power generated by each power plant. But in terms of computation time Primal Dual Interior Point method is faster than the method of Linear Programming, especially for large systems. Primal Dual Interior Point method have solved the problem in 40.59 seconds, while Linear Programming method takes longer 239.72 seconds for large-scale system 9241 bus. This is because the settlement PDIP algorithm starts from the starting point x0, which is located within the area of feasible move towards the optimal point, in contrast to the simplex method that moves along the border of the feasible from one extreme point to the other extreme point. Thus Primal Dual Interior Point method have more efficient in solving optimal power flow problem of large-scale power systems.

16. The complexity of interior point methods for solving discounted turn-based stochastic games

DEFF Research Database (Denmark)

Hansen, Thomas Dueholm; Ibsen-Jensen, Rasmus

2013-01-01

for general 2TBSGs. This implies that a number of interior point methods can be used to solve 2TBSGs. We consider two such algorithms: the unified interior point method of Kojima, Megiddo, Noma, and Yoshise, and the interior point potential reduction algorithm of Kojima, Megiddo, and Ye. The algorithms run...... states and discount factor γ we get κ=Θ(n(1−γ)2) , −δ=Θ(n√1−γ) , and 1/θ=Θ(n(1−γ)2) in the worst case. The lower bounds for κ, − δ, and 1/θ are all obtained using the same family of deterministic games....

17. On the Convergence of the Iteration Sequence in Primal-Dual Interior-Point Methods

National Research Council Canada - National Science Library

Tapia, Richard A; Zhang, Yin; Ye, Yinyu

1993-01-01

Recently, numerous research efforts, most of them concerned with superlinear convergence of the duality gap sequence to zero in the Kojima-Mizuno-Yoshise primal-dual interior-point method for linear...

18. The Homogeneous Interior-Point Algorithm: Nonsymmetric Cones, Warmstarting, and Applications

DEFF Research Database (Denmark)

Skajaa, Anders

algorithms for these problems is still limited. The goal of this thesis is to investigate and shed light on two computational aspects of homogeneous interior-point algorithms for convex conic optimization: The first part studies the possibility of devising a homogeneous interior-point method aimed at solving...... problems involving constraints that require nonsymmetric cones in their formulation. The second part studies the possibility of warmstarting the homogeneous interior-point algorithm for conic problems. The main outcome of the first part is the introduction of a completely new homogeneous interior......-point algorithm designed to solve nonsymmetric convex conic optimization problems. The algorithm is presented in detail and then analyzed. We prove its convergence and complexity. From a theoretical viewpoint, it is fully competitive with other algorithms and from a practical viewpoint, we show that it holds lots...

19. A trust region interior point algorithm for optimal power flow problems

Energy Technology Data Exchange (ETDEWEB)

Wang Min [Hefei University of Technology (China). Dept. of Electrical Engineering and Automation; Liu Shengsong [Jiangsu Electric Power Dispatching and Telecommunication Company (China). Dept. of Automation

2005-05-01

This paper presents a new algorithm that uses the trust region interior point method to solve nonlinear optimal power flow (OPF) problems. The OPF problem is solved by a primal/dual interior point method with multiple centrality corrections as a sequence of linearized trust region sub-problems. It is the trust region that controls the linear step size and ensures the validity of the linear model. The convergence of the algorithm is improved through the modification of the trust region sub-problem. Numerical results of standard IEEE systems and two realistic networks ranging in size from 14 to 662 buses are presented. The computational results show that the proposed algorithm is very effective to optimal power flow applications, and favors the successive linear programming (SLP) method. Comparison with the predictor/corrector primal/dual interior point (PCPDIP) method is also made to demonstrate the superiority of the multiple centrality corrections technique. (author)

20. Interior Point Methods on GPU with application to Model Predictive Control

DEFF Research Database (Denmark)

The goal of this thesis is to investigate the application of interior point methods to solve dynamical optimization problems, using a graphical processing unit (GPU) with a focus on problems arising in Model Predictice Control (MPC). Multi-core processors have been available for over ten years now...... software package called GPUOPT, available under the non-restrictive MIT license. GPUOPT includes includes a primal-dual interior-point method, which supports both the CPU and the GPU. It is implemented as multiple components, where the matrix operations and solver for the Newton directions is separated...

1. An Effective, Robust And Parallel Implementation Of An Interior Point Algorithm For Limit State Optimization

DEFF Research Database (Denmark)

Dollerup, Niels; Jepsen, Michael S.; Damkilde, Lars

2013-01-01

The artide describes a robust and effective implementation of the interior point optimization algorithm. The adopted method includes a precalculation step, which reduces the number of variables by fulfilling the equilibrium equations a priori. This work presents an improved implementation of the ...

2. An effective, robust and parallel implementation of an interior point algorithm for limit state optimization

DEFF Research Database (Denmark)

Dollerup, Niels; Jepsen, Michael S.; Frier, Christian

2014-01-01

A robust and effective finite element based implementation of lower bound limit state analysis applying an interior point formulation is presented in this paper. The lower bound formulation results in a convex optimization problem consisting of a number of linear constraints from the equilibrium...

3. Infeasible Interior-Point Methods for Linear Optimization Based on Large Neighborhood

NARCIS (Netherlands)

2015-01-01

In this paper, we design a class of infeasible interior-point methods for linear optimization based on large neighborhood. The algorithm is inspired by a full-Newton step infeasible algorithm with a linear convergence rate in problem dimension that was recently proposed by the second author.

4. Generic primal-dual interior point methods based on a new kernel function

NARCIS (Netherlands)

EL Ghami, M.; Roos, C.

2008-01-01

In this paper we present a generic primal-dual interior point methods (IPMs) for linear optimization in which the search direction depends on a univariate kernel function which is also used as proximity measure in the analysis of the algorithm. The proposed kernel function does not satisfy all the

5. A Riccati-Based Interior Point Method for Efficient Model Predictive Control of SISO Systems

DEFF Research Database (Denmark)

Hagdrup, Morten; Johansson, Rolf; Bagterp Jørgensen, John

2017-01-01

model parts separate. The controller is designed based on the deterministic model, while the Kalman filter results from the stochastic part. The controller is implemented as a primal-dual interior point (IP) method using Riccati recursion and the computational savings possible for SISO systems...

6. A Primal-Dual Interior Point-Linear Programming Algorithm for MPC

DEFF Research Database (Denmark)

Edlund, Kristian; Sokoler, Leo Emil; Jørgensen, John Bagterp

2009-01-01

Constrained optimal control problems for linear systems with linear constraints and an objective function consisting of linear and l1-norm terms can be expressed as linear programs. We develop an efficient primal-dual interior point algorithm for solution of such linear programs. The algorithm...

7. Interior Point Method for Solving Fuzzy Number Linear Programming Problems Using Linear Ranking Function

Directory of Open Access Journals (Sweden)

Yi-hua Zhong

2013-01-01

Full Text Available Recently, various methods have been developed for solving linear programming problems with fuzzy number, such as simplex method and dual simplex method. But their computational complexities are exponential, which is not satisfactory for solving large-scale fuzzy linear programming problems, especially in the engineering field. A new method which can solve large-scale fuzzy number linear programming problems is presented in this paper, which is named a revised interior point method. Its idea is similar to that of interior point method used for solving linear programming problems in crisp environment before, but its feasible direction and step size are chosen by using trapezoidal fuzzy numbers, linear ranking function, fuzzy vector, and their operations, and its end condition is involved in linear ranking function. Their correctness and rationality are proved. Moreover, choice of the initial interior point and some factors influencing the results of this method are also discussed and analyzed. The result of algorithm analysis and example study that shows proper safety factor parameter, accuracy parameter, and initial interior point of this method may reduce iterations and they can be selected easily according to the actual needs. Finally, the method proposed in this paper is an alternative method for solving fuzzy number linear programming problems.

8. A primal-dual interior point method for large-scale free material optimization

DEFF Research Database (Denmark)

Weldeyesus, Alemseged Gebrehiwot; Stolpe, Mathias

2015-01-01

Free Material Optimization (FMO) is a branch of structural optimization in which the design variable is the elastic material tensor that is allowed to vary over the design domain. The requirements are that the material tensor is symmetric positive semidefinite with bounded trace. The resulting...... optimization problem is a nonlinear semidefinite program with many small matrix inequalities for which a special-purpose optimization method should be developed. The objective of this article is to propose an efficient primal-dual interior point method for FMO that can robustly and accurately solve large...... of iterations the interior point method requires is modest and increases only marginally with problem size. The computed optimal solutions obtain a higher precision than other available special-purpose methods for FMO. The efficiency and robustness of the method is demonstrated by numerical experiments on a set...

9. Identifying critical constraints for the maximum loadability of electric power systems - analysis via interior point method

Energy Technology Data Exchange (ETDEWEB)

Barboza, Luciano Vitoria [Sul-riograndense Federal Institute for Education, Science and Technology (IFSul), Pelotas, RS (Brazil)], E-mail: luciano@pelotas.ifsul.edu.br

2009-07-01

This paper presents an overview about the maximum load ability problem and aims to study the main factors that limit this load ability. Specifically this study focuses its attention on determining which electric system buses influence directly on the power demand supply. The proposed approach uses the conventional maximum load ability method modelled by an optimization problem. The solution of this model is performed using the Interior Point methodology. As consequence of this solution method, the Lagrange multipliers are used as parameters that identify the probable 'bottlenecks' in the electric power system. The study also shows the relationship between the Lagrange multipliers and the cost function in the Interior Point optimization interpreted like sensitivity parameters. In order to illustrate the proposed methodology, the approach was applied to an IEEE test system and to assess its performance, a real equivalent electric system from the South- Southeast region of Brazil was simulated. (author)

10. Short run hydrothermal coordination with network constraints using an interior point method

International Nuclear Information System (INIS)

Lopez Lezama, Jesus Maria; Gallego Pareja, Luis Alfonso; Mejia Giraldo, Diego

2008-01-01

This paper presents a lineal optimization model to solve the hydrothermal coordination problem. The main contribution of this work is the inclusion of the network constraints to the hydrothermal coordination problem and its solution using an interior point method. The proposed model allows working with a system that can be completely hydraulic, thermal or mixed. Results are presented on the IEEE 14 bus test system

11. Interior-Point Method for Non-Linear Non-Convex Optimization

Czech Academy of Sciences Publication Activity Database

2004-01-01

Roč. 11, č. 5-6 (2004), s. 431-453 ISSN 1070-5325 R&D Projects: GA AV ČR IAA1030103 Institutional research plan: CEZ:AV0Z1030915 Keywords : non-linear programming * interior point methods * indefinite systems * indefinite preconditioners * preconditioned conjugate gradient method * merit functions * algorithms * computational experiments Subject RIV: BA - General Mathematics Impact factor: 0.727, year: 2004

12. On Implementing a Homogeneous Interior-Point Algorithm for Nonsymmetric Conic Optimization

DEFF Research Database (Denmark)

Skajaa, Anders; Jørgensen, John Bagterp; Hansen, Per Christian

Based on earlier work by Nesterov, an implementation of a homogeneous infeasible-start interior-point algorithm for solving nonsymmetric conic optimization problems is presented. Starting each iteration from (the vicinity of) the central path, the method computes (nearly) primal-dual symmetric...... approximate tangent directions followed by a purely primal centering procedure to locate the next central primal-dual point. Features of the algorithm include that it makes use only of the primal barrier function, that it is able to detect infeasibilities in the problem and that no phase-I method is needed...

13. Calculation and decomposition of spot price using interior point nonlinear optimisation methods

International Nuclear Information System (INIS)

Xie, K.; Song, Y.H.

2004-01-01

Optimal pricing for real and reactive power is a very important issue in a deregulation environment. This paper summarises the optimal pricing problem as an extended optimal power flow problem. Then, spot prices are decomposed into different components reflecting various ancillary services. The derivation of the proposed decomposition model is described in detail. Primary-Dual Interior Point method is applied to avoid 'go' 'no go' gauge. In addition, the proposed approach can be extended to cater for other types of ancillary services. (author)

14. Inversion of Gravity Anomalies Using Primal-Dual Interior Point Methods

Directory of Open Access Journals (Sweden)

Aaron A. Velasco

2016-06-01

Full Text Available Structural inversion of gravity datasets based on the use of density anomalies to derive robust images of the subsurface (delineating lithologies and their boundaries constitutes a fundamental non-invasive tool for geological exploration. The use of experimental techniques in geophysics to estimate and interpret di erences in the substructure based on its density properties have proven e cient; however, the inherent non-uniqueness associated with most geophysical datasets make this the ideal scenario for the use of recently developed robust constrained optimization techniques. We present a constrained optimization approach for a least squares inversion problem aimed to characterize 2-Dimensional Earth density structure models based on Bouguer gravity anomalies. The proposed formulation is solved with a Primal-Dual Interior-Point method including equality and inequality physical and structural constraints. We validate our results using synthetic density crustal structure models with varying complexity and illustrate the behavior of the algorithm using di erent initial density structure models and increasing noise levels in the observations. Based on these implementations, we conclude that the algorithm using Primal-Dual Interior-Point methods is robust, and its results always honor the geophysical constraints. Some of the advantages of using this approach for structural inversion of gravity data are the incorporation of a priori information related to the model parameters (coming from actual physical properties of the subsurface and the reduction of the solution space contingent on these boundary conditions.

15. Development of Quadratic Programming Algorithm Based on Interior Point Method with Estimation Mechanism of Active Constraints

Science.gov (United States)

Hashimoto, Hiroyuki; Takaguchi, Yusuke; Nakamura, Shizuka

Instability of calculation process and increase of calculation time caused by increasing size of continuous optimization problem remain the major issues to be solved to apply the technique to practical industrial systems. This paper proposes an enhanced quadratic programming algorithm based on interior point method mainly for improvement of calculation stability. The proposed method has dynamic estimation mechanism of active constraints on variables, which fixes the variables getting closer to the upper/lower limit on them and afterwards releases the fixed ones as needed during the optimization process. It is considered as algorithm-level integration of the solution strategy of active-set method into the interior point method framework. We describe some numerical results on commonly-used bench-mark problems called “CUTEr” to show the effectiveness of the proposed method. Furthermore, the test results on large-sized ELD problem (Economic Load Dispatching problems in electric power supply scheduling) are also described as a practical industrial application.

16. An interior-point method for the Cartesian P*(k-linear complementarity problem over symmetric cones

Directory of Open Access Journals (Sweden)

B Kheirfam

2014-06-01

Full Text Available A novel primal-dual path-following interior-point algorithm for the Cartesian P*(k-linear complementarity problem over symmetric cones is presented. The algorithm is based on a reformulation of the central path for finding the search directions. For a full Nesterov-Todd step feasible interior-point algorithm based on the new search directions, the complexity bound of the algorithm with small-update approach is the best-available bound.

17. Interior point algorithms: guaranteed optimality for fluence map optimization in IMRT

Energy Technology Data Exchange (ETDEWEB)

Aleman, Dionne M [Department of Mechanical and Industrial Engineering, University of Toronto, 5 King' s College Road, Toronto, ON M5S 3G8 (Canada); Glaser, Daniel [Division of Optimization and Systems Theory, Department of Mathematics, Royal Institute of Technology, Stockholm (Sweden); Romeijn, H Edwin [Department of Industrial and Operations Engineering, University of Michigan, Ann Arbor, MI 48109-2117 (United States); Dempsey, James F, E-mail: aleman@mie.utoronto.c, E-mail: romeijn@umich.ed, E-mail: jfdempsey@viewray.co [ViewRay, Inc. 2 Thermo Fisher Way, Village of Oakwood, OH 44146 (United States)

2010-09-21

One of the most widely studied problems of the intensity-modulated radiation therapy (IMRT) treatment planning problem is the fluence map optimization (FMO) problem, the problem of determining the amount of radiation intensity, or fluence, of each beamlet in each beam. For a given set of beams, the fluences of the beamlets can drastically affect the quality of the treatment plan, and thus it is critical to obtain good fluence maps for radiation delivery. Although several approaches have been shown to yield good solutions to the FMO problem, these solutions are not guaranteed to be optimal. This shortcoming can be attributed to either optimization model complexity or properties of the algorithms used to solve the optimization model. We present a convex FMO formulation and an interior point algorithm that yields an optimal treatment plan in seconds, making it a viable option for clinical applications.

18. Interior point algorithms: guaranteed optimality for fluence map optimization in IMRT

International Nuclear Information System (INIS)

Aleman, Dionne M; Glaser, Daniel; Romeijn, H Edwin; Dempsey, James F

2010-01-01

One of the most widely studied problems of the intensity-modulated radiation therapy (IMRT) treatment planning problem is the fluence map optimization (FMO) problem, the problem of determining the amount of radiation intensity, or fluence, of each beamlet in each beam. For a given set of beams, the fluences of the beamlets can drastically affect the quality of the treatment plan, and thus it is critical to obtain good fluence maps for radiation delivery. Although several approaches have been shown to yield good solutions to the FMO problem, these solutions are not guaranteed to be optimal. This shortcoming can be attributed to either optimization model complexity or properties of the algorithms used to solve the optimization model. We present a convex FMO formulation and an interior point algorithm that yields an optimal treatment plan in seconds, making it a viable option for clinical applications.

19. Improved equivalent magnetic network modeling for analyzing working points of PMs in interior permanent magnet machine

Science.gov (United States)

Guo, Liyan; Xia, Changliang; Wang, Huimin; Wang, Zhiqiang; Shi, Tingna

2018-05-01

As is well known, the armature current will be ahead of the back electromotive force (back-EMF) under load condition of the interior permanent magnet (PM) machine. This kind of advanced armature current will produce a demagnetizing field, which may make irreversible demagnetization appeared in PMs easily. To estimate the working points of PMs more accurately and take demagnetization under consideration in the early design stage of a machine, an improved equivalent magnetic network model is established in this paper. Each PM under each magnetic pole is segmented, and the networks in the rotor pole shoe are refined, which makes a more precise model of the flux path in the rotor pole shoe possible. The working point of each PM under each magnetic pole can be calculated accurately by the established improved equivalent magnetic network model. Meanwhile, the calculated results are compared with those calculated by FEM. And the effects of d-axis component and q-axis component of armature current, air-gap length and flux barrier size on working points of PMs are analyzed by the improved equivalent magnetic network model.

20. An interior-point method for total variation regularized positron emission tomography image reconstruction

Science.gov (United States)

Bai, Bing

2012-03-01

There has been a lot of work on total variation (TV) regularized tomographic image reconstruction recently. Many of them use gradient-based optimization algorithms with a differentiable approximation of the TV functional. In this paper we apply TV regularization in Positron Emission Tomography (PET) image reconstruction. We reconstruct the PET image in a Bayesian framework, using Poisson noise model and TV prior functional. The original optimization problem is transformed to an equivalent problem with inequality constraints by adding auxiliary variables. Then we use an interior point method with logarithmic barrier functions to solve the constrained optimization problem. In this method, a series of points approaching the solution from inside the feasible region are found by solving a sequence of subproblems characterized by an increasing positive parameter. We use preconditioned conjugate gradient (PCG) algorithm to solve the subproblems directly. The nonnegativity constraint is enforced by bend line search. The exact expression of the TV functional is used in our calculations. Simulation results show that the algorithm converges fast and the convergence is insensitive to the values of the regularization and reconstruction parameters.

1. A Riccati Based Homogeneous and Self-Dual Interior-Point Method for Linear Economic Model Predictive Control

DEFF Research Database (Denmark)

Sokoler, Leo Emil; Frison, Gianluca; Edlund, Kristian

2013-01-01

In this paper, we develop an efficient interior-point method (IPM) for the linear programs arising in economic model predictive control of linear systems. The novelty of our algorithm is that it combines a homogeneous and self-dual model, and a specialized Riccati iteration procedure. We test...

2. Distributed primal–dual interior-point methods for solving tree-structured coupled convex problems using message-passing

DEFF Research Database (Denmark)

Khoshfetrat Pakazad, Sina; Hansson, Anders; Andersen, Martin S.

2017-01-01

In this paper, we propose a distributed algorithm for solving coupled problems with chordal sparsity or an inherent tree structure which relies on primal–dual interior-point methods. We achieve this by distributing the computations at each iteration, using message-passing. In comparison to existi...

3. A Class of Large-Update and Small-Update Primal-Dual Interior-Point Algorithms for Linear Optimization

NARCIS (Netherlands)

Bai, Y.Q.; Lesaja, G.; Roos, C.; Wang, G.Q.; El Ghami, M.

2008-01-01

In this paper we present a class of polynomial primal-dual interior-point algorithms for linear optimization based on a new class of kernel functions. This class is fairly general and includes the classical logarithmic function, the prototype self-regular function, and non-self-regular kernel

4. Improved Full-Newton Step O(nL) Infeasible Interior-Point Method for Linear Optimization

NARCIS (Netherlands)

Gu, G.; Mansouri, H.; Zangiabadi, M.; Bai, Y.Q.; Roos, C.

2009-01-01

We present several improvements of the full-Newton step infeasible interior-point method for linear optimization introduced by Roos (SIAM J. Optim. 16(4):1110–1136, 2006). Each main step of the method consists of a feasibility step and several centering steps. We use a more natural feasibility step,

5. Holographic interferometry applied to the measurement of displacements of the interior points of transparent bodies.

Science.gov (United States)

Sciammarella, C A; Gilbert, J A

1976-09-01

Utilizing the light scattering property of transparent media, holographic interferometry is applied to the measurement of displacement at the interior planes of three dimensional bodies. The use of a double beam illumination and the introduction of a fictitious displacement make it feasible to obtain information corresponding to components of displacement projected on the scattering plane. When the proposed techniques are invoked, it is possible to eliminate the use of a matching index of refraction fluid in many problems involving symmetrically loaded prismatic bodies. Scattered light holographic interferometry is limited in its use to small changes in the index of refraction and to low values of relative retardation. In spite of these restrictions, a large number of technical problems in both statics and dynamics can be solved.

6. Synthesis and Characterization of a Matrix-Free Nanocomposite

Energy Technology Data Exchange (ETDEWEB)

Bierner, Jessica Anne [New Mexico State Univ., Las Cruces, NM (United States)

2014-09-01

Iron nanoparticles have a number of magnetic properties that make them a potentially useful material for transformer applications. These desirable traits include high saturation magnetization, high susceptibility, and very low magnetic hysteresis. Before iron nanoparticles can even be tested for applicability, however, a number of scientific hurdles must be overcome. First an affordable and scalable synthetic approach must be developed, and the results of these large scale reactions must be fashioned into a solid material. To be of use, this solid material must have very high loading of iron nanoparticles and must be relatively easy to form into desired shapes. To achieve these goals, iron nanoparticles were synthesized by the thermal decomposition of iron pentacarbonyl in the presence of dodecylamine which bound to the surface of the particles. This reaction was scaled up to a multi-gram scale with only minor changes in size and shape control. These particles were then fashioned into “matrix-free nanocomposites”, where the particles were cross-linked to each other. This was achieved by first exchanging the surface coating for a combination of hexylamine and 1,6-diaminohexane. The diamine provided primary amines on the particle surface that were available for further reaction. These were shown to be capable of reacting with a triepoxide cross-linker to form a hard, solid material, analogous to the cure of a common epoxy adhesive. Loading of up to 80% iron by mass (about 43% by volume) was achieved.

7. A Homogeneous and Self-Dual Interior-Point Linear Programming Algorithm for Economic Model Predictive Control

DEFF Research Database (Denmark)

Sokoler, Leo Emil; Frison, Gianluca; Skajaa, Anders

2015-01-01

We develop an efficient homogeneous and self-dual interior-point method (IPM) for the linear programs arising in economic model predictive control of constrained linear systems with linear objective functions. The algorithm is based on a Riccati iteration procedure, which is adapted to the linear...... system of equations solved in homogeneous and self-dual IPMs. Fast convergence is further achieved using a warm-start strategy. We implement the algorithm in MATLAB and C. Its performance is tested using a conceptual power management case study. Closed loop simulations show that 1) the proposed algorithm...

8. Improved Full-Newton Step O(nL) Infeasible Interior-Point Method for Linear Optimization

OpenAIRE

Gu, G.; Mansouri, H.; Zangiabadi, M.; Bai, Y.Q.; Roos, C.

2009-01-01

We present several improvements of the full-Newton step infeasible interior-point method for linear optimization introduced by Roos (SIAM J. Optim. 16(4):1110–1136, 2006). Each main step of the method consists of a feasibility step and several centering steps. We use a more natural feasibility step, which targets the ?+-center of the next pair of perturbed problems. As for the centering steps, we apply a sharper quadratic convergence result, which leads to a slightly wider neighborhood for th...

9. Minimization of energy consumption in HVAC systems with data-driven models and an interior-point method

International Nuclear Information System (INIS)

Kusiak, Andrew; Xu, Guanglin; Zhang, Zijun

2014-01-01

Highlights: • We study the energy saving of HVAC systems with a data-driven approach. • We conduct an in-depth analysis of the topology of developed Neural Network based HVAC model. • We apply interior-point method to solving a Neural Network based HVAC optimization model. • The uncertain building occupancy is incorporated in the minimization of HVAC energy consumption. • A significant potential of saving HVAC energy is discovered. - Abstract: In this paper, a data-driven approach is applied to minimize energy consumption of a heating, ventilating, and air conditioning (HVAC) system while maintaining the thermal comfort of a building with uncertain occupancy level. The uncertainty of arrival and departure rate of occupants is modeled by the Poisson and uniform distributions, respectively. The internal heating gain is calculated from the stochastic process of the building occupancy. Based on the observed and simulated data, a multilayer perceptron algorithm is employed to model and simulate the HVAC system. The data-driven models accurately predict future performance of the HVAC system based on the control settings and the observed historical information. An optimization model is formulated and solved with the interior-point method. The optimization results are compared with the results produced by the simulation models

10. A homogeneous interior-point algorithm for nonsymmetric convex conic optimization

DEFF Research Database (Denmark)

Skajaa, Anders; Ye, Yinyu

2014-01-01

-centered primal–dual point. Features of the algorithm include that it makes use only of the primal barrier function, that it is able to detect infeasibilities in the problem and that no phase-I method is needed. We prove convergence to TeX -accuracy in TeX iterations. To improve performance, the algorithm employs...

11. Desain Interior Four Points Solo untuk Menampilkan Citra Hotel Bisnis Elegan Kontemporer dengan Sentuhan Budaya Jawa

OpenAIRE

Paramita, Trivesti Laksmi

2015-01-01

Kota Solo sebagai salah satu potensi pariwisata di sentral Jawa telah banyak kemajuan. Sebagai salah satu kota wisata MICE (Meeting, Incentive, Convention, and Exhibition) di Indonesia, Solo melengkapi kemajuan infrastuktur kotanya dengan fasilitas penunjang, kemudahan akses dan akomodasi bagi para pebisnis. Hotel bisnis adalah hotel yang fasilitas utamanya dapat mengakomodasi seluruh kegiatan bisnis tamu hotel. Four Points by Sheraton yang merupakan hotel bisnis dengan klasifikasi bintang em...

12. Design Development of a Combined Deployment and Pointing System for the International Space Station Neutron Star Interior Composition Explorer Telescope

Science.gov (United States)

Budinoff, Jason; Gendreau, Keith; Arzoumanian, Zaven; Baker, Charles; Berning, Robert; Colangelo, TOdd; Holzinger, John; Lewis, Jesse; Liu, Alice; Mitchell, Alissa;

2016-01-01

This paper describes the design of a unique suite of mechanisms that make up the Deployment and Pointing System (DAPS) for the Neutron Star Interior Composition Explorer (NICER/SEXTANT) instrument, an X-Ray telescope, which will be mounted on the International Space Station (ISS). The DAPS system uses four stepper motor actuators to deploy the telescope box, latch it in the deployed position, and allow it to track sky targets. The DAPS gimbal architecture provides full-hemisphere coverage, and is fully re-stowable. The compact design of the mechanism allowed the majority of total instrument volume to be used for science. Override features allow DAPS to be stowed by ISS robotics.

13. Directory of Open Access Journals (Sweden)

Antonio Roberto Balbo

2012-01-01

Full Text Available This paper proposes a predictor-corrector primal-dual interior point method which introduces line search procedures (IPLS in both the predictor and corrector steps. The Fibonacci search technique is used in the predictor step, while an Armijo line search is used in the corrector step. The method is developed for application to the economic dispatch (ED problem studied in the field of power systems analysis. The theory of the method is examined for quadratic programming problems and involves the analysis of iterative schemes, computational implementation, and issues concerning the adaptation of the proposed algorithm to solve ED problems. Numerical results are presented, which demonstrate improvements and the efficiency of the IPLS method when compared to several other methods described in the literature. Finally, postoptimization analyses are performed for the solution of ED problems.

14. On the Evaluation of Computational Results Obtained from Solving System of linear Equations With matlab The Dual affine Scalling interior Point

International Nuclear Information System (INIS)

Murfi, Hendri; Basaruddin, T.

2001-01-01

The interior point method for linear programming has gained extraordinary interest as an alternative to simplex method since Karmarkar presented a polynomial-time algorithm for linear programming based on interior point method. In implementation of the algorithm of this method, there are two important things that have impact heavily to performance of the algorithm; they are data structure and used method to solve linear equation system in the algorithm. This paper describes about solving linear equation system in variants of the algorithm called dual-affine scaling algorithm. Next, we evaluate experimentally results of some used methods, either direct method or iterative method. The experimental evaluation used Matlab

15. Interior point algorithm-based power flow optimisation of a combined AC and DC multi-terminal grid

Directory of Open Access Journals (Sweden)

Farhan Beg

2015-01-01

Full Text Available The high cost of power electronic equipment, lower reliability and poor power handling capacity of the semiconductor devices had stalled the deployment of systems based on DC (multi-terminal direct current system (MTDC networks. The introduction of voltage source converters (VSCs for transmission has renewed the interest in the development of large interconnected grids based on both alternate current (AC and DC transmission networks. Such a grid platform also realises the added advantage of integrating the renewable energy sources into the grid. Thus a grid based on DC MTDC network is a possible solution to improve energy security and check the increasing supply demand gap. An optimal power solution for combined AC and DC grids obtained by the solution of the interior point algorithm is proposed in this study. Multi-terminal HVDC grids lie at the heart of various suggested transmission capacity increases. A significant difference is observed when MTDC grids are solved for power flows in place of conventional AC grids. This study deals with the power flow problem of a combined MTDC and an AC grid. The AC side is modelled with the full power flow equations and the VSCs are modelled using a connecting line, two generators and an AC node. The VSC and the DC losses are also considered. The optimisation focuses on several different goals. Three different scenarios are presented in an arbitrary grid network with ten AC nodes and five converter stations.

16. Performance of dielectric nanocomposites: matrix-free, hairy nanoparticle assemblies and amorphous polymer-nanoparticle blends.

Science.gov (United States)

Grabowski, Christopher A; Koerner, Hilmar; Meth, Jeffrey S; Dang, Alei; Hui, Chin Ming; Matyjaszewski, Krzysztof; Bockstaller, Michael R; Durstock, Michael F; Vaia, Richard A

2014-12-10

Demands to increase the stored energy density of electrostatic capacitors have spurred the development of materials with enhanced dielectric breakdown, improved permittivity, and reduced dielectric loss. Polymer nanocomposites (PNCs), consisting of a blend of amorphous polymer and dielectric nanofillers, have been studied intensely to satisfy these goals; however, nanoparticle aggregates, field localization due to dielectric mismatch between particle and matrix, and the poorly understood role of interface compatibilization have challenged progress. To expand the understanding of the inter-relation between these factors and, thus, enable rational optimization of low and high contrast PNC dielectrics, we compare the dielectric performance of matrix-free hairy nanoparticle assemblies (aHNPs) to blended PNCs in the regime of low dielectric contrast to establish how morphology and interface impact energy storage and breakdown across different polymer matrices (polystyrene, PS, and poly(methyl methacrylate), PMMA) and nanoparticle loadings (0-50% (v/v) silica). The findings indicate that the route (aHNP versus blending) to well-dispersed morphology has, at most, a minor impact on breakdown strength trends with nanoparticle volume fraction; the only exception being at intermediate loadings of silica in PMMA (15% (v/v)). Conversely, aHNPs show substantial improvements in reducing dielectric loss and maintaining charge/discharge efficiency. For example, low-frequency dielectric loss (1 Hz-1 kHz) of PS and PMMA aHNP films was essentially unchanged up to a silica content of 50% (v/v), whereas traditional blends showed a monotonically increasing loss with silica loading. Similar benefits are seen via high-field polarization loop measurements where energy storage for ∼15% (v/v) silica loaded PMMA and PS aHNPs were 50% and 200% greater than respective comparable PNC blends. Overall, these findings on low dielectric contrast PNCs clearly point to the performance benefits of

17. A matrix-free implicit treatment for all speed flows on unstructured grids

International Nuclear Information System (INIS)

Kloczko, Th.

2006-03-01

The aim of this research work is the development of an efficient implicit scheme for computing compressible and low-speed flows on unstructured meshes. The first part is devoted to the review and analysis of some standard block-implicit treatments for the two-dimensional Euler and Navier-Stokes equations with a view to identify the best candidate for a fair comparison with the matrix-free treatment. The second part forms the main original contribution of this research work. It describes and analyses a matrix-free treatment that can be applied to any type of flow (inviscid/viscous, low Mach/highly compressible, steady/unsteady). The third part deals with the implementation of this treatment within the CAST3M code, and the demonstration of its advantages over existing techniques for computing applications of interest for the CEA: low-Mach number steady and unsteady flows in a Tee junction for example

18. Hydrophobic matrix-free graphene-oxide composites with isotropic and nematic states

Science.gov (United States)

Wåhlander, Martin; Nilsson, Fritjof; Carlmark, Anna; Gedde, Ulf W.; Edmondson, Steve; Malmström, Eva

2016-08-01

We demonstrate a novel route to synthesise hydrophobic matrix-free composites of polymer-grafted graphene oxide (GO) showing isotropic or nematic alignment and shape-memory effects. For the first time, a cationic macroinitiator (MI) has been immobilised on anionic GO and subsequently grafted with hydrophobic polymer grafts. Dense grafts of PBA, PBMA and PMMA with a wide range of average graft lengths (MW: 1-440 kDa) were polymerised by surface-initiated controlled radical precipitation polymerisation from the statistical MI. The surface modification is designed similarly to bimodal graft systems, where the cationic MI generates nanoparticle repulsion, similar to dense short grafts, while the long grafts offer miscibility in non-polar environments and cohesion. The state-of-the-art dispersions of grafted GO were in the isotropic state. Transparent and translucent matrix-free GO-composites could be melt-processed directly using only grafted GO. After processing, birefringence due to nematic alignment of grafted GO was observed as a single giant Maltese cross, 3.4 cm across. Permeability models for composites containing aligned 2D-fillers were developed, which were compared with the experimental oxygen permeability data and found to be consistent with isotropic or nematic states. The storage modulus of the matrix-free GO-composites increased with GO content (50% increase at 0.67 wt%), while the significant increases in the thermal stability (up to 130 °C) and the glass transition temperature (up to 17 °C) were dependent on graft length. The tuneable matrix-free GO-composites with rapid thermo-responsive shape-memory effects are promising candidates for a vast range of applications, especially selective membranes and sensors.We demonstrate a novel route to synthesise hydrophobic matrix-free composites of polymer-grafted graphene oxide (GO) showing isotropic or nematic alignment and shape-memory effects. For the first time, a cationic macroinitiator (MI) has been

19. A Globally Convergent Matrix-Free Method for Constrained Equations and Its Linear Convergence Rate

Directory of Open Access Journals (Sweden)

Min Sun

2014-01-01

Full Text Available A matrix-free method for constrained equations is proposed, which is a combination of the well-known PRP (Polak-Ribière-Polyak conjugate gradient method and the famous hyperplane projection method. The new method is not only derivative-free, but also completely matrix-free, and consequently, it can be applied to solve large-scale constrained equations. We obtain global convergence of the new method without any differentiability requirement on the constrained equations. Compared with the existing gradient methods for solving such problem, the new method possesses linear convergence rate under standard conditions, and a relax factor γ is attached in the update step to accelerate convergence. Preliminary numerical results show that it is promising in practice.

20. Efficient Tridiagonal Preconditioner for the Matrix-Free Truncated Newton Method

Czech Academy of Sciences Publication Activity Database

2014-01-01

Roč. 235, 25 May (2014), s. 394-407 ISSN 0096-3003 R&D Projects: GA ČR GA13-06684S Institutional support: RVO:67985807 Keywords : unconstrained optimization * large scale optimization * matrix-free truncated Newton method * preconditioned conjugate gradient method * preconditioners obtained by the directional differentiation * numerical algorithms Subject RIV: BA - General Mathematics Impact factor: 1.551, year: 2014

Science.gov (United States)

Gurel, Meltem O.; Potthoff, Joy K.

2006-01-01

The domain of interiors constitutes a point of tension between practicing architects and interior designers. Design of interior spaces is a significant part of architectural profession. Yet, to what extent does architectural education keep pace with changing demands in rendering topics that are identified as pertinent to the design of interiors?…

2. Interior intrusion detection systems

Energy Technology Data Exchange (ETDEWEB)

Rodriguez, J.R.; Matter, J.C. (Sandia National Labs., Albuquerque, NM (United States)); Dry, B. (BE, Inc., Barnwell, SC (United States))

1991-10-01

The purpose of this NUREG is to present technical information that should be useful to NRC licensees in designing interior intrusion detection systems. Interior intrusion sensors are discussed according to their primary application: boundary-penetration detection, volumetric detection, and point protection. Information necessary for implementation of an effective interior intrusion detection system is presented, including principles of operation, performance characteristics and guidelines for design, procurement, installation, testing, and maintenance. A glossary of sensor data terms is included. 36 figs., 6 tabs.

3. Interior intrusion detection systems

International Nuclear Information System (INIS)

Rodriguez, J.R.; Matter, J.C.; Dry, B.

1991-10-01

The purpose of this NUREG is to present technical information that should be useful to NRC licensees in designing interior intrusion detection systems. Interior intrusion sensors are discussed according to their primary application: boundary-penetration detection, volumetric detection, and point protection. Information necessary for implementation of an effective interior intrusion detection system is presented, including principles of operation, performance characteristics and guidelines for design, procurement, installation, testing, and maintenance. A glossary of sensor data terms is included. 36 figs., 6 tabs

4. Preconditioner Updates for Solving Sequences of Linear Systems in Matrix-Free Environment

Czech Academy of Sciences Publication Activity Database

Duintjer Tebbens, Jurjen; Tůma, Miroslav

2010-01-01

Roč. 17, č. 6 (2010), s. 997-1019 ISSN 1070-5325 R&D Projects: GA AV ČR IAA100300802; GA AV ČR KJB100300703 Grant - others:GA AV ČR(CZ) M100300902 Institutional research plan: CEZ:AV0Z10300504 Source of funding: I - inštitucionálna podpora na rozvoj VO Keywords : preconditioned iterative methods * matrix-free environment * factorization updates * inexact Newton-Krylov methods * incomplete factorizations Subject RIV: BA - General Mathematics Impact factor: 1.163, year: 2010

5. A Comparative Study of Applying Active-Set and Interior Point Methods in MPC for Controlling Nonlinear pH Process

Directory of Open Access Journals (Sweden)

Syam Syafiie

2014-06-01

Full Text Available A comparative study of Model Predictive Control (MPC using active-set method and interior point methods is proposed as a control technique for highly non-linear pH process. The process is a strong acid-strong base system. A strong acid of hydrochloric acid (HCl and a strong base of sodium hydroxide (NaOH with the presence of buffer solution sodium bicarbonate (NaHCO3 are used in a neutralization process flowing into reactor. The non-linear pH neutralization model governed in this process is presented by multi-linear models. Performance of both controllers is studied by evaluating its ability of set-point tracking and disturbance-rejection. Besides, the optimization time is compared between these two methods; both MPC shows the similar performance with no overshoot, offset, and oscillation. However, the conventional active-set method gives a shorter control action time for small scale optimization problem compared to MPC using IPM method for pH control.

6. Interior Design.

Science.gov (United States)

Texas Tech Univ., Lubbock. Home Economics Curriculum Center.

This document contains teacher's materials for an eight-unit secondary education vocational home economics course on interior design. The units cover period styles of interiors, furniture and accessories, surface treatments and lighting, appliances and equipment, design and space planning in home and business settings, occupant needs, acquisition…

7. Color in interior spaces

OpenAIRE

Demirörs, Müge Bozbeyli

1992-01-01

Ankara : The Department of Interior Architecture and Environmental Design and the Institute of Fine Arts of Bilkent University, 1992. Thesis (Master's) -- -Bilkent University, 1992. Includes bibliographical references leaves 95-99. Color can be approached from different perspectives and disciplines such as, biology, theory, technology, and psychology. This thesis discusses color, from the stand point of interior spaces, which to some extent involves most of these discipli...

8. A Matrix-Free Posterior Ensemble Kalman Filter Implementation Based on a Modified Cholesky Decomposition

Directory of Open Access Journals (Sweden)

Elias D. Nino-Ruiz

2017-07-01

Full Text Available In this paper, a matrix-free posterior ensemble Kalman filter implementation based on a modified Cholesky decomposition is proposed. The method works as follows: the precision matrix of the background error distribution is estimated based on a modified Cholesky decomposition. The resulting estimator can be expressed in terms of Cholesky factors which can be updated based on a series of rank-one matrices in order to approximate the precision matrix of the analysis distribution. By using this matrix, the posterior ensemble can be built by either sampling from the posterior distribution or using synthetic observations. Furthermore, the computational effort of the proposed method is linear with regard to the model dimension and the number of observed components from the model domain. Experimental tests are performed making use of the Lorenz-96 model. The results reveal that, the accuracy of the proposed implementation in terms of root-mean-square-error is similar, and in some cases better, to that of a well-known ensemble Kalman filter (EnKF implementation: the local ensemble transform Kalman filter. In addition, the results are comparable to those obtained by the EnKF with large ensemble sizes.

9. Diamond Nanowires: A Novel Platform for Electrochemistry and Matrix-Free Mass Spectrometry

Directory of Open Access Journals (Sweden)

Sabine Szunerits

2015-05-01

Full Text Available Over the last decades, carbon-based nanostructures have generated a huge interest from both fundamental and technological viewpoints owing to their physicochemical characteristics, markedly different from their corresponding bulk states. Among these nanostructured materials, carbon nanotubes (CNTs, and more recently graphene and its derivatives, hold a central position. The large amount of work devoted to these materials is driven not only by their unique mechanical and electrical properties, but also by the advances made in synthetic methods to produce these materials in large quantities with reasonably controllable morphologies. While much less studied than CNTs and graphene, diamond nanowires, the diamond analogue of CNTs, hold promise for several important applications. Diamond nanowires display several advantages such as chemical inertness, high mechanical strength, high thermal and electrical conductivity, together with proven biocompatibility and existence of various strategies to functionalize their surface. The unique physicochemical properties of diamond nanowires have generated wide interest for their use as fillers in nanocomposites, as light detectors and emitters, as substrates for nanoelectronic devices, as tips for scanning probe microscopy as well as for sensing applications. In the past few years, studies on boron-doped diamond nanowires (BDD NWs focused on increasing their electrochemical active surface area to achieve higher sensitivity and selectivity compared to planar diamond interfaces. The first part of the present review article will cover the promising applications of BDD NWS for label-free sensing. Then, the potential use of diamond nanowires as inorganic substrates for matrix-free laser desorption/ionization mass spectrometry, a powerful label-free approach for quantification and identification of small compounds, will be discussed.

10. Diamond nanowires: a novel platform for electrochemistry and matrix-free mass spectrometry.

Science.gov (United States)

Szunerits, Sabine; Coffinier, Yannick; Boukherroub, Rabah

2015-05-27

Over the last decades, carbon-based nanostructures have generated a huge interest from both fundamental and technological viewpoints owing to their physicochemical characteristics, markedly different from their corresponding bulk states. Among these nanostructured materials, carbon nanotubes (CNTs), and more recently graphene and its derivatives, hold a central position. The large amount of work devoted to these materials is driven not only by their unique mechanical and electrical properties, but also by the advances made in synthetic methods to produce these materials in large quantities with reasonably controllable morphologies. While much less studied than CNTs and graphene, diamond nanowires, the diamond analogue of CNTs, hold promise for several important applications. Diamond nanowires display several advantages such as chemical inertness, high mechanical strength, high thermal and electrical conductivity, together with proven biocompatibility and existence of various strategies to functionalize their surface. The unique physicochemical properties of diamond nanowires have generated wide interest for their use as fillers in nanocomposites, as light detectors and emitters, as substrates for nanoelectronic devices, as tips for scanning probe microscopy as well as for sensing applications. In the past few years, studies on boron-doped diamond nanowires (BDD NWs) focused on increasing their electrochemical active surface area to achieve higher sensitivity and selectivity compared to planar diamond interfaces. The first part of the present review article will cover the promising applications of BDD NWS for label-free sensing. Then, the potential use of diamond nanowires as inorganic substrates for matrix-free laser desorption/ionization mass spectrometry, a powerful label-free approach for quantification and identification of small compounds, will be discussed.

11. Interior Alaska Bouguer Gravity Anomaly

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — A 1 kilometer Complete Bouguer Anomaly gravity grid of interior Alaska. Only those grid cells within 10 kilometers of a gravity data point have gravity values....

12. Spatial distribution of theobromine--a low MW drug--in tissues via matrix-free NALDI-MS imaging.

Science.gov (United States)

Tata, Alessandra; Montemurro, Chiara; Porcari, Andreia M; Silva, Kamila C; Lopes de Faria, José B; Eberlin, Marcos N

2014-09-01

The ability of nano-assisted laser desorption-ionization mass spectrometry imaging (NALDI-IMS) to provide selective chemical monitoring with appropriate spatial distribution of a low molecular drug in a biological tissue was investigated. NALDI-IMS is a matrix-free laser desorption ionization (LDI) protocol based on imprinting of tissue constituents on a nanostructured surface. Using the accumulation of theobromine in rat kidney as a model, NALDI-IMS was found to provide well-resolved images of the special distribution of this low molecular weight (MW) drug in tissue. Copyright © 2014 John Wiley & Sons, Ltd.

13. Recent Advances in the Analysis of Macromolecular Interactions Using the Matrix-Free Method of Sedimentation in the Analytical Ultracentrifuge

Directory of Open Access Journals (Sweden)

Stephen E. Harding

2015-03-01

Full Text Available Sedimentation in the analytical ultracentrifuge is a matrix free solution technique with no immobilisation, columns, or membranes required and can be used to study self-association and complex or “hetero”-interactions, stoichiometry, reversibility and interaction strength of a wide variety of macromolecular types and across a very large dynamic range (dissociation constants from 10−12 M to 10−1 M. We extend an earlier review specifically highlighting advances in sedimentation velocity and sedimentation equilibrium in the analytical ultracentrifuge applied to protein interactions and mucoadhesion and to review recent applications in protein self-association (tetanus toxoid, agrin, protein-like carbohydrate association (aminocelluloses, carbohydrate-protein interactions (polysaccharide-gliadin, nucleic-acid protein (G-duplexes, nucleic acid-carbohydrate (DNA-chitosan and finally carbohydrate-carbohydrate (xanthan-chitosan and a ternary polysaccharide complex interactions.

14. A matrix-free implicit unstructured multigrid finite volume method for simulating structural dynamics and fluid structure interaction

Science.gov (United States)

Lv, X.; Zhao, Y.; Huang, X. Y.; Xia, G. H.; Su, X. H.

2007-07-01

A new three-dimensional (3D) matrix-free implicit unstructured multigrid finite volume (FV) solver for structural dynamics is presented in this paper. The solver is first validated using classical 2D and 3D cantilever problems. It is shown that very accurate predictions of the fundamental natural frequencies of the problems can be obtained by the solver with fast convergence rates. This method has been integrated into our existing FV compressible solver [X. Lv, Y. Zhao, et al., An efficient parallel/unstructured-multigrid preconditioned implicit method for simulating 3d unsteady compressible flows with moving objects, Journal of Computational Physics 215(2) (2006) 661-690] based on the immersed membrane method (IMM) [X. Lv, Y. Zhao, et al., as mentioned above]. Results for the interaction between the fluid and an immersed fixed-free cantilever are also presented to demonstrate the potential of this integrated fluid-structure interaction approach.

15. Primal-dual predictor-corrector interior point algorithm for quadratic semidefinite programming%二次半定规划的原始对偶预估校正内点算法

Institute of Scientific and Technical Information of China (English)

黄静静; 商朋见; 王爱文

2011-01-01

将半定规划(Semidefinite Programming,SDP)的内点算法推广到二次半定规划(QuadraticSemidefinite Programming,QSDP),重点讨论了AHO搜索方向的产生方法.首先利用Wolfe对偶理论推导得到了求解二次半定规划的非线性方程组,利用牛顿法求解该方程组,得到了求解QSDP的内点算法的AHO搜索方向,证明了该搜索方向的存在唯一性,最后给出了求解二次半定规划的预估校正内点算法的具体步骤,并对基于不同搜索方向的内点算法进行了数值实验,结果表明基于NT方向的内点算法最为稳健.%This paper extends the interior point algorithm for solving Semidefinite Programming (SDP) to Quadratic Semidefinite Programming(QSDP) and especially discusses the generation of AHO search direction. Firstly, we derive the nonlinear equations for solving QSDP using Wolfe's dual theorem.The AHO search direction is got by applying Newton' s method to the equations. Then we prove the existence and uniqueness of the search direction, and give the detaied steps of predictor-corrector interior-point algorithm. At last, this paper provides a numerical comparison of the algoritms using three different search directions and suggests the algorithm using NT direction is the most robust.

16. APPLICATION OF A PRIMAL-DUAL INTERIOR POINT ALGORITHM USING EXACT SECOND ORDER INFORMATION WITH A NOVEL NON-MONOTONE LINE SEARCH METHOD TO GENERALLY CONSTRAINED MINIMAX OPTIMISATION PROBLEMS

Directory of Open Access Journals (Sweden)

2008-04-01

Full Text Available This work presents the application of a primal-dual interior point method to minimax optimisation problems. The algorithm differs significantly from previous approaches as it involves a novel non-monotone line search procedure, which is based on the use of standard penalty methods as the merit function used for line search. The crucial novel concept is the discretisation of the penalty parameter used over a finite range of orders of magnitude and the provision of a memory list for each such order. An implementation within a logarithmic barrier algorithm for bounds handling is presented with capabilities for large scale application. Case studies presented demonstrate the capabilities of the proposed methodology, which relies on the reformulation of minimax models into standard nonlinear optimisation models. Some previously reported case studies from the open literature have been solved, and with significantly better optimal solutions identified. We believe that the nature of the non-monotone line search scheme allows the search procedure to escape from local minima, hence the encouraging results obtained.

17. Sustainable Commercial Interior Design

OpenAIRE

Keane, Órla

2009-01-01

This dissertation looks at the environmental benefits of 3 key areas in relation to interior design: Energy, Water and Air; energy efficient lighting, water efficient plumbing fixtures and the effects of interior materials and finishes on indoor air quality. Qualitative research methodology: Extensive literature review of texts available on these topics, and also of the relevant building codes and environmental legislation applicable to Irish interior designers and the built environment. ...

18. Digital Interior Design by Stailia Design Oy

OpenAIRE

Lindroos, Jaana

2017-01-01

The objective of the thesis work is to research and create a web based service in a field of interior design. With my project, I am hoping to find out whether this kind of web service in the field of interior design can work in general and that the process together with the actual order form on internet is smooth from both customer and company point of view. The company has interior design related services but none entirely executed on the web. The target is to create a totally new service/pr...

19. INTERIORITY - a prefab case study

DEFF Research Database (Denmark)

Hvejsel, Marie Frier

Dealing with the general theme of domestic architectural quality, the PhD thesis ‘INTERIORITY’ takes its point of departure in the continuous and increasing need to improve our capability as architects to theoretically articulate the intangible concept of quality, and to reveal it through an active...... been motivated by the particular hypothesis that an introduction of the notion of interiority, as an ability of the spatial envelope itself to address the sensuous scale of furniture, unfolds a particular dual critical potential signifying our experience of domestic architectural quality: On the one......, tectonically. Hence, it has been a particular idea of the study to explore the relation between furniture, the spatial envelope itself, and its construct by using furniture as an architectural concept. Consequently, the thesis has specifically investigated whether this notion of interiority, describing...

20. Interior acoustic cloak

Directory of Open Access Journals (Sweden)

Wael Akl

2014-12-01

Full Text Available Acoustic cloaks have traditionally been intended to externally surround critical objects to render these objects acoustically invisible. However, in this paper, the emphasis is placed on investigating the application of the acoustic cloaks to the interior walls of acoustic cavities in an attempt to minimize the noise levels inside these cavities. In this manner, the acoustic cloaks can serve as a viable and efficient alternative to the conventional passive noise attenuation treatments which are invariably heavy and bulky. The transformation acoustics relationships that govern the operation of this class of interior acoustic cloaks are presented. Physical insights are given to relate these relationships to the reasons behind the effectiveness of the proposed interior acoustic cloaks. Finite element models are presented to demonstrate the characteristics of interior acoustic cloaks used in treating the interior walls of circular and square cavities both in the time and frequency domains. The obtained results emphasize the effectiveness of the proposed interior cloaks in eliminating the reflections of the acoustic waves from the walls of the treated cavities and thereby rendering these cavities acoustically quiet. It is important to note here that the proposed interior acoustic cloaks can find applications in acoustic cavities such as aircraft cabins and auditoriums as well as many other critical applications.

1. SU-F-T-15: Evaluation of 192Ir, 60Co and 169Yb Sources for High Dose Rate Prostate Brachytherapy Inverse Planning Using An Interior Point Constraint Generation Algorithm

Energy Technology Data Exchange (ETDEWEB)

Mok Tsze Chung, E; Aleman, D [University of Toronto, Toronto, Ontario (Canada); Safigholi, H; Nicolae, A; Davidson, M; Ravi, A; Song, W [Odette Cancer Centre, Sunnybrook Health Sciences Centre, Toronto, Ontario (Canada)

2016-06-15

Purpose: The effectiveness of using a combination of three sources, {sup 60}Co, {sup 192}Ir and {sup 169}Yb, is analyzed. Different combinations are compared against a single {sup 192}Ir source on prostate cancer cases. A novel inverse planning interior point algorithm is developed in-house to generate the treatment plans. Methods: Thirteen prostate cancer patients are separated into two groups: Group A includes eight patients with the prostate as target volume, while group B consists of four patients with a boost nodule inside the prostate that is assigned 150% of the prescription dose. The mean target volume is 35.7±9.3cc and 30.6±8.5cc for groups A and B, respectively. All patients are treated with each source individually, then with paired sources, and finally with all three sources. To compare the results, boost volume V150 and D90, urethra Dmax and D10, and rectum Dmax and V80 are evaluated. For fair comparison, all plans are normalized to a uniform V100=100. Results: Overall, double- and triple-source plans were better than single-source plans. The triple-source plans resulted in an average decrease of 21.7% and 1.5% in urethra Dmax and D10, respectively, and 8.0% and 0.8% in rectum Dmax and V80, respectively, for group A. For group B, boost volume V150 and D90 increased by 4.7% and 3.0%, respectively, while keeping similar dose delivered to the urethra and rectum. {sup 60}Co and {sup 192}Ir produced better plans than their counterparts in the double-source category, whereas {sup 60}Co produced more favorable results than the remaining individual sources. Conclusion: This study demonstrates the potential advantage of using a combination of two or three sources, reflected in dose reduction to organs-at-risk and more conformal dose to the target. three sources, reflected in dose reduction to organs-at-risk and more conformal dose to the target. Our results show that {sup 60}Co, {sup 192}Ir and {sup 169}Yb produce the best plans when used simultaneously and

2. Interior Space: Representation, Occupation, Well-Being and Interiority

OpenAIRE

Power, Jacqueline

2014-01-01

This article will provide an overview of space as it is understood and engaged with from within the discipline of interior design/interior architecture. Firstly, the term interior will be described. Secondly, the paper will discuss space as a general concept, before exploring what space is speifically for the interior design/interior architecture discipline. How is space understood? What does space "look" like for interuior designers/interior architects?.

3. Perancangan InteriorInterior World Center” di Surabaya

OpenAIRE

Handojo, Renita Olivia

2014-01-01

Interior World Center is a place that contain all needs and matters related to world of interior. The main purpose of Interior World Center is to give access and facilitate people in fulfill their needs that concern and correspond with interior world, that is to say with combine and integrate several interior activity into one in corporated place. Inside of this building there are several commercial space related with the interior world. The commercial spaces will support each other in order ...

4. Mass spectrometry imaging of illicit drugs in latent fingerprints by matrix-free and matrix-assisted desorption/ionization techniques.

Science.gov (United States)

2018-02-01

Compared with classical matrix-assisted laser-desorption ionization mass spectrometry (MALDI), the matrix free-based strategies generate a cleaner background, without significant noise or interference coming from an applied matrix, which is beneficial for the analysis of small molecules, such as drugs of abuse. In this work, we probed the detection efficiency of methamphetamine, heroin and cocaine in nanostructure-assisted laser desorption-ionization (NALDI) and desorption electrospray ionization and compared the sensitivity of these two matrix-free tools with a standard MALDI mass spectrometry experiment. In a typical mass spectrometry imaging (MSI) setup, papillary line latent fingerprints were recorded as a mixture a common skin fatty acid or interfering cosmetics with a drug. In a separate experiment, all drugs (1 µL of 1 μM standard solution) were detected by all three ionization techniques on a target. In the case of cocaine and heroin, NALDI mass spectrometry was the most sensitive and revealed signals even from 0.1 μM solution. The drug/drug contaminant (fatty acid or cosmetics) MSI approach could be used by law enforcement personnel to confirm drug abusers of having come into contact with the suspected drug by use of fingerprint scans at time of apprehension which can aid in reducing the work of lab officials.

5. Studies in Interior Design

Science.gov (United States)

Environ Planning Design, 1970

1970-01-01

Floor plans and photographs illustrate a description of the Samuel C. Williams Library at Stevens Institute of Technology, Hoboken, N.J. The unusual interior design allows students to take full advantage of the library's resources. (JW)

6. INTUITION IN INTERIOR DESIGN

Directory of Open Access Journals (Sweden)

Irina Solovyova

2008-11-01

Full Text Available Intuition enables individuals to develop an understanding of the structure of complex systems. In interior design many decisions are reached intuitively even though the process of formulating solutions may be argued rationally. Intuition is intrinsically intertwined with our collateral experiences, memories, and implicit thought. Design intuition draws on our entire experience, not only on what we consciously isolate as relevant information. In education we prohibit students from relying on their intuition and require solutions based on pure reason. The author of this paper argues for bringing intuitive decision making back into interior design as a legitimate design tactic.

7. Prefab-Interiority

DEFF Research Database (Denmark)

Frier, Marie; Fisker, Anna Marie; Kirkegaard, Poul Henning

2010-01-01

qualities is significantly dependent on our constructive ability to economically and production-technically join building elements. Consequently this paper explores the potential for developing interiority as a theory and design principle for transforming constructive challenges within prefab practice....../S. As a research result the paper suggests a positioning of interiority as a theory and design principle for developing a sensuous prefab practice......., and practical realm of prefabrication, leaving the produced houses as monotonous box-like constructions rather than inhabitable homes. But what are the sensuous qualities actually spatially defining a home, and how to formulate design principles for developing and revealing these qualities within prefab...

8. Interior design for dentistry.

Science.gov (United States)

Unthank, M; True, G

1999-11-01

In the increasingly complex, competitive and stressful field of dentistry, effectively designed dental offices can offer significant benefits. Esthetic, functional and life-cycle cost issues to be considered when developing your interior design scheme include color, finishes, lighting, furnishings, art and accessories. An appropriately designed dental office serves as a valuable marketing tool for your practice, as well as a safe and enjoyable work environment. Qualified interior design professionals can help you make design decisions that can yield optimum results within your budget.

9. Meaning of Interior Tomography

Science.gov (United States)

Wang, Ge; Yu, Hengyong

2013-01-01

The classic imaging geometry for computed tomography is for collection of un-truncated projections and reconstruction of a global image, with the Fourier transform as the theoretical foundation that is intrinsically non-local. Recently, interior tomography research has led to theoretically exact relationships between localities in the projection and image spaces and practically promising reconstruction algorithms. Initially, interior tomography was developed for x-ray computed tomography. Then, it has been elevated as a general imaging principle. Finally, a novel framework known as “omni-tomography” is being developed for grand fusion of multiple imaging modalities, allowing tomographic synchrony of diversified features. PMID:23912256

10. Probing the Solar Interior

Home; Journals; Resonance – Journal of Science Education; Volume 3; Issue 3. Probing the Solar Interior Hearing the Heartbeats of the Sun. Ashok Ambastha. General ... Author Affiliations. Ashok Ambastha1. Joint In-Charge Udaipur Solar Observatory Physical Research laboratory P.O. Box No. 198 Udaipur 313 001, India ...

11. Interior intrusion alarm systems

International Nuclear Information System (INIS)

Prell, J.A.

1978-01-01

In meeting the requirements for the safeguarding of special nuclear material and the physical protection of licensed facilities, the licensee is required to design a physical security system that will meet minimum performance requirements. An integral part of any physical security system is the interior intrusion alarm system. The purpose of this report is to provide the potential user of an interior intrusion alarm system with information on the various types, components, and performance capabilities available so that he can design and install the optimum alarm system for his particular environment. In addition, maintenance and testing procedures are discussed and recommended which, if followed, will help the user obtain the optimum results from his system

12. INTUITION IN INTERIOR DESIGN

OpenAIRE

Irina Solovyova

2008-01-01

Intuition enables individuals to develop an understanding of the structure of complex systems. In interior design many decisions are reached intuitively even though the process of formulating solutions may be argued rationally. Intuition is intrinsically intertwined with our collateral experiences, memories, and implicit thought. Design intuition draws on our entire experience, not only on what we consciously isolate as relevant information. In education we prohibit students from relying on t...

13. Interior acoustic cloak

OpenAIRE

Wael Akl; A. Baz

2014-01-01

Acoustic cloaks have traditionally been intended to externally surround critical objects to render these objects acoustically invisible. However, in this paper, the emphasis is placed on investigating the application of the acoustic cloaks to the interior walls of acoustic cavities in an attempt to minimize the noise levels inside these cavities. In this manner, the acoustic cloaks can serve as a viable and efficient alternative to the conventional passive noise attenuation treatments which a...

14. Standardization of phytopharmaceuticals: qualitative evaluation and quantification of carbohydrates in medicinal plants using tlc, matrix free meldi-tof-ms and gc-ms

International Nuclear Information System (INIS)

Qureshi, M.N.; Bonn, G.K.

2014-01-01

Pharmaceutical industry requires reliable and less time consuming procedures for the quality control analysis of raw materials and finished products. The study was focused on thin layer chromatography (TLC), gas chromatography (GC) and matrix free material enhanced laser desorption ionization time of flight mass spectrometry (mf-MELDI-MS). Standards and microwave assisted water extracts from Achillea milleffolium (herb), Althaea officinalis (roots), Equisetum arvense (herb), Juglans regia (leaves), Matricaria chamomella (flowers) and Taraxacum officinale (herb) were the samples used for this study. The presence of mono- (fructose and glucose) and disaccharide (sucrose) in all the plants under study was proved through the TLC analysis. These results were confirmed by the Mf-MELDI-MS experiments. Gas chromatography coupled to mass spectrometry (GC-MS) confirmed the data obtained via TLC and mf-MELDI-MS, delivering additionally quantified values, but needed a long time. A carbohydrate of higher oligomerization degree could not be found. Among the six plants, glucose was found in highest concentration in Taraxacum officinale. Fructose is present in appreciable quantity in Matricaria chamomella while Althaea officinalis has the highest amount of sucrose among the plants under study. (author)

15. Numerical study of steady/unsteady flow and heat transfer in porous media using a characteristics-based matrix-free implicit FV method on unstructured grids

International Nuclear Information System (INIS)

Chiem, Kok Siong; Zhao Yong

2004-01-01

In this study, a high-resolution characteristic-based finite-volume (FV) method on unstructured grids [Int. J. Numer. Method Eng. 50 (2001) 11; Int. J. Heat Fluid Flow 21 (2000) 432] is extended by a matrix-free implicit dual-time stepping scheme for the numerical simulation of steady and unsteady flow and heat transfer with porous media. The method has been used to study the characteristics of a complex problem: flow and heat transfer in a channel with multiple discrete porous blocks, which was originally proposed by Huang and Vafai [J. Thermophys. Heat Transfer 8 (3) (1994) 563]. In addition, flow and heat transfer in a channel partially or fully filled with porous layers and containing solid protruding blocks with constant heat flux on its lower surface are also investigated in details. Hydrodynamic and heat transfer results are reported for both steady and transient flow cases. In particular, the effects of Darcy and Reynolds numbers on heat transfer augmentation and pressure loss are studied. An in-depth discussion of the formation and variation of recirculation is presented and the existence of optimum porous insert is demonstrated. At high Reynolds numbers the flow in the porous channel exhibits a cyclic characteristics although unlike the non-porous channel flow, the cyclic vortex development is only restricted to a small area behind the last solid block, while temperature changes more slowly and does not exhibit cyclic variations over a long period of time. It is shown that for all the cases studied altering some parametric values can have significant and interesting effects on both flow pattern as well as heat transfer characteristics

16. Interior design conceptual basis

CERN Document Server

Sully, Anthony

2015-01-01

Maximizing reader insights into interior design as a conceptual way of thinking, which is about ideas and how they are formulated. The major themes of this book are the seven concepts of planning, circulation, 3D, construction, materials, colour and lighting, which covers the entire spectrum of a designer’s activity. Analysing design concepts from the view of the range of possibilities that the designer can examine and eventually decide by choice and conclusive belief the appropriate course of action to take in forming that particular concept, the formation and implementation of these concepts is taken in this book to aid the designer in his/her professional task of completing a design proposal to the client. The purpose of this book is to prepare designers to focus on each concept independently as much as possible, whilst acknowledging relative connections without unwarranted influences unfairly dictating a conceptual bias, and is about that part of the design process called conceptual analysis. It is assu...

17. Interior design and healing architecture

DEFF Research Database (Denmark)

Mogensen, Jeppe; Poulsen, Søren Bolvig; Hansen, Allan Grutt

2015-01-01

. Through a mixed-method study, 43 patients from the outpatient-lung department at Hospital Vendsyssel, Denmark were presented with different types of furniture and materials and were asked about their preferences. Additional questions on their experience of the hospital interior were asked to guide......Hospital design is today influenced by the design concept healing architecture, stating that the patients’ healing process is promoted through accommodating physical surroundings. However, despite the increasing amount of research in the field of healing architecture, research on interior design...... and materials are rather limited. To compliment research in hospital interior design with particular focus on the use of interior textiles, this pilot study explores if the patients’ preferences for more home-like hospital interiors can be linked to a preference for textile-based furniture and materials...

18. Designing fire safe interiors.

Science.gov (United States)

Belles, D W

1992-01-01

Any product that causes a fire to grow large is deficient in fire safety performance. A large fire in any building represents a serious hazard. Multiple-death fires almost always are linked to fires that grow quickly to a large size. Interior finishes have large, continuous surfaces over which fire can spread. They are regulated to slow initial fire growth, and must be qualified for use on the basis of fire tests. To obtain meaningful results, specimens must be representative of actual installation. Variables--such as the substrate, the adhesive, and product thickness and density--can affect product performance. The tunnel test may not adequately evaluate some products, such as foam plastics or textile wall coverings, thermoplastic materials, or materials of minimal mass. Where questions exist, products should be evaluated on a full-scale basis. Curtains and draperies are examples of products that ignite easily and spread flames readily. The present method for testing curtains and draperies evaluates one fabric at a time. Although a fabric tested alone may perform well, fabrics that meet test standards individually sometimes perform poorly when tested in combination. Contents and furnishings constitute the major fuels in many fires. Contents may involve paper products and other lightweight materials that are easily ignited and capable of fast fire growth. Similarly, a small source may ignite many items of furniture that are capable of sustained fire growth. Upholstered furniture can reach peak burning rates in less than 5 minutes. Furnishings have been associated with many multiple-death fires.(ABSTRACT TRUNCATED AT 250 WORDS)

19. Graviatoms with de Sitter Interior

Directory of Open Access Journals (Sweden)

Irina Dymnikova

2013-01-01

Full Text Available We present a graviatom with de Sitter interior as a new candidate to atomic dark matter generically related to a vacuum dark energy through its de Sitter vacuum interior. It is a gravitationally bound quantum system consisting of a nucleus represented by a regular primordial black hole (RPBH, its remnant or gravitational vacuum soliton G-lump, and a charged particle. We estimate probability of formation of RPBHs and G-lumps in the early Universe and evaluate energy spectrum and electromagnetic radiation of graviatom which can in principle bear information about a fundamental symmetry scale responsible for de Sitter interior and serve as its observational signatures.

20. Desain Interior Gedung Kesenian Jakarta

Directory of Open Access Journals (Sweden)

Sri Rachmayanti

2011-04-01

Full Text Available The purpose of this study was to examine the interior design of Gedung Kesenian Jakarta in detail. Another thing is to obtain complete data and analyze the interior design development of GKJ.  This study will described in terms of design style and different designs since the early period of this building, the arrival of the Dutch until the present era. Besides aesthetic of interior design, it will review technical factors in the building that related to its interior design, such as acoustic, air conditioning, lighting system, sound system. This research is based on data literartures and interviews with the GKJ. In conclusion, it will discuss the existence of GKJ in relation to local identity, culture and heritage.

1. Interior Alaska Bouguer Gravity Anomaly

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — A 1 kilometer Complete Bouguer Anomaly gravity grid of interior Alaska. All grid cells within the rectangular data area (from 61 to 66 degrees North latitude and...

2. On the complexity of a combined homotopy interior method for convex programming

Science.gov (United States)

Yu, Bo; Xu, Qing; Feng, Guochen

2007-03-01

In [G.C. Feng, Z.H. Lin, B. Yu, Existence of an interior pathway to a Karush-Kuhn-Tucker point of a nonconvex programming problem, Nonlinear Anal. 32 (1998) 761-768; G.C. Feng, B. Yu, Combined homotopy interior point method for nonlinear programming problems, in: H. Fujita, M. Yamaguti (Eds.), Advances in Numerical Mathematics, Proceedings of the Second Japan-China Seminar on Numerical Mathematics, Lecture Notes in Numerical and Applied Analysis, vol. 14, Kinokuniya, Tokyo, 1995, pp. 9-16; Z.H. Lin, B. Yu, G.C. Feng, A combined homotopy interior point method for convex programming problem, Appl. Math. Comput. 84 (1997) 193-211.], a combined homotopy was constructed for solving non-convex programming and convex programming with weaker conditions, without assuming the logarithmic barrier function to be strictly convex and the solution set to be bounded. It was proven that a smooth interior path from an interior point of the feasible set to a K-K-T point of the problem exists. This shows that combined homotopy interior point methods can solve the problem that commonly used interior point methods cannot solveE However, so far, there is no result on its complexity, even for linear programming. The main difficulty is that the objective function is not monotonically decreasing on the combined homotopy path. In this paper, by taking a piecewise technique, under commonly used conditions, polynomiality of a combined homotopy interior point method is given for convex nonlinear programming.

3. Distributed Interior-point Method for Loosely Coupled Problems

DEFF Research Database (Denmark)

Pakazad, Sina Khoshfetrat; Hansson, Anders; Andersen, Martin Skovgaard

2014-01-01

In this paper, we put forth distributed algorithms for solving loosely coupled unconstrained and constrained optimization problems. Such problems are usually solved using algorithms that are based on a combination of decomposition and first order methods. These algorithms are commonly very slow a...

4. Interior Design Factors in Library Facilities.

Science.gov (United States)

Jackson, Patricia Ann

When planning the interior of a library facility, the planning team of librarian, library consultant, architect, and interior design consultant must focus attention on the basic principles of interior design and the psychological needs of the user. Colors for an interior should be selected with careful regard to space, light, and emotional and…

5. VARIATIONAL PRINCIPLE FOR PLANETARY INTERIORS

International Nuclear Information System (INIS)

Zeng, Li; Jacobsen, Stein B.

2016-01-01

In the past few years, the number of confirmed planets has grown above 2000. It is clear that they represent a diversity of structures not seen in our own solar system. In addition to very detailed interior modeling, it is valuable to have a simple analytical framework for describing planetary structures. The variational principle is a fundamental principle in physics, entailing that a physical system follows the trajectory, which minimizes its action. It is alternative to the differential equation formulation of a physical system. Applying the variational principle to the planetary interior can beautifully summarize the set of differential equations into one, which provides us some insight into the problem. From this principle, a universal mass–radius relation, an estimate of the error propagation from the equation of state to the mass–radius relation, and a form of the virial theorem applicable to planetary interiors are derived.

6. Functional textiles in hospital interiors

DEFF Research Database (Denmark)

Mogensen, Jeppe

This PhD thesis explores the possibilities and design qualities of using functional textiles in the interior of hospital environments, and is the result of a three years collaboration between Aalborg University, Department of Civil Engineering, and VIA University College, VIA Design. The project...... that the physical environments affect the patients’ level of stress and influence their process of recovery and healing. However, although research in this field of hospital design has increased substantially in recent years, knowledge on the use of new materials and textiles in hospital interiors is still rather...... limited. Concerned with the design potentials of using textiles in hospital interiors, the purpose of the PhD project has been to explore the possibilities and design qualities of using these materials in hospital design. Relating to both technical and aesthetic aspects of using functional textiles...

7. Interior design for passive solar homes

Energy Technology Data Exchange (ETDEWEB)

Breen, J. C.

1981-07-01

The increasing emphasis on refinement of passive solar systems has brought recognition to interior design as an integral part of passive solar architecture. Interior design can be used as a finetuning tool minimizing many of the problems associated with passive solar energy use in residential buildings. In addition, treatment of interior space in solar model homes may be a prime factor in determining sales success. A new style of interior design is evolving in response to changes in building form incorporating passive solar design features. The psychology behind passive solar architecture is reflected in interiors, and selection of interior components increasingly depends on the functional suitability of various interior elements.

8. Interior design for passive solar homes

Science.gov (United States)

Breen, J. C.

1981-07-01

The increasing emphasis on refinement of passive solar systems brought recognition to interior design as an integral part of passive solar architecture. Interior design can be used as a finetuning tool minimizing many of the problems associated with passive solar energy use in residential buildings. In addition, treatment of interior space in solar model homes may be a prime factor in determining sales success. A new style of interior design is evolving in response to changes in building from incorporating passive solar design features. The psychology behind passive solar architecture is reflected in interiors, and selection of interior components increasingly depends on the functional suitably of various interior elements.

9. Dewatering tailings impoundments : interior drains

International Nuclear Information System (INIS)

Charlie, W.A.; Doehring, D.O.; Durnford, D.S.

1984-01-01

For the design of a new uranium tailings impoundment in the western United States, it was proposed that an interior drainage system be considered to economically and reliably minimize potential short- and long-term environmental impacts. The objectives were to decrease the effective hydraulic head on the clay liner, to dewater and stabilize the tailings, and to increase the amount of water recycled to the mill. In addition, desaturation of the impoundment would induce capillary pressure (negative porewater pressure), further reducing the potential movement of dissolved pollutants. This paper presents saturated and unsaturated seepage principles and reviews the concept, criteria and design of the various interior drainage systems considered

10. Integrating sustainability in interior design studio

OpenAIRE

Karslı, Umut Tuğlu

2013-01-01

Teaching methods on concept of sustainability are frequently searched in the interior architecture education. The purpose of this study is to propose a model for integrating sustainability in interior design studio. In this context, the first part of the research defines relationship between sustainability and interior architecture and determines sustainable interior design principles. In the second part, an interior design studio model is proposed and principles determined in the first part ...

11. Crash simulations for interior design

NARCIS (Netherlands)

Poeze, E.; Slaats, P.M.A.

1996-01-01

With the increasing number of compact cars, safety aspects becomes increasingly important for interior designs. The smaller dimensions of these cars do not only decrease the car mass, but also the energy absorption length, resulting in a more severe crash pulse. As a consequence, the inertia loading

12. Interior Design Trends in Libraries.

Science.gov (United States)

Sager, Don, Ed.

2000-01-01

Four contributing authors discuss perspectives on current trends in library interior design. Articles include: "Trends in Library Furnishings: A Manufacturer's Perspective" (Andrea Johnson); "Libraries, Architecture, and Light: The Architect's Perspective" (Rick McCarthy); "The Library Administrator's Perspective" (Chadwick Raymond); and "The…

13. Interior Design: Teacher's Instructional Guide.

Science.gov (United States)

Hays, Tricia

This teacher's instructional guide, which is part of a family and consumer sciences education series focusing on a broad range of employment opportunities, is intended to assist teachers responsible for teaching one- and two-year interior design programs for Texas high school students. The following are among the items included: (1) introductory…

14. Fire history and fire management implications in the Yukon Flats National Wildlife Refuge, interior Alaska

Science.gov (United States)

S. A. Drury; P. J. Grissom

2008-01-01

We conducted this investigation in response to criticisms that the current Alaska Interagency Fire Management Plans are allowing too much of the landscape in interior Alaska to burn annually. To address this issue, we analyzed fire history patterns within the Yukon Flats National Wildlife Refuge, interior Alaska. We dated 40 fires on 27 landscape points within the...

15. COLOR PERCEPTION IN INTERIOR DESIGN

OpenAIRE

ÖZSAVAŞ, Nilay

2016-01-01

In this study, it is mentioned about color that is a keyfactor of interior architecture profession. Firstly, space perception, colorand space interaction, effects of space, color and user relationship is explainedexcept color theories and definitions. Within this scope these are scrutinizingboth perception of color in the space and material and lighting issues thathave a big role in perception. Recent searches, practice methods and evaluationwith examples play a part in this article. It is ai...

16. Creating Library Interiors: Planning and Design Considerations.

Science.gov (United States)

Jones, Plummer Alston, Jr.; Barton, Phillip K.

1997-01-01

Examines design considerations for public library interiors: access; acoustical treatment; assignable and nonassignable space; building interiors: ceilings, clocks, color, control, drinking fountains; exhibit space: slotwall display, floor coverings, floor loading, furniture, lighting, mechanical systems, public address, copying machines,…

17. The Neutron Star Interior Composition Explorer (NICER)

Science.gov (United States)

Wilson-Hodge, Colleen A.; Gendreau, K.; Arzoumanian, Z.

2014-01-01

The Neutron Star Interior Composition Explorer (NICER) is an approved NASA Explorer Mission of Opportunity dedicated to the study of the extraordinary gravitational, electromagnetic, and nuclear-physics environments embodied by neutron stars. Scheduled to be launched in 2016 as an International Space Station payload, NICER will explore the exotic states of matter, using rotation-resolved spectroscopy of the thermal and non-thermal emissions of neutron stars in the soft (0.2-12 keV) X-ray band. Grazing-incidence "concentrator" optics coupled with silicon drift detectors, actively pointed for a full hemisphere of sky coverage, will provide photon-counting spectroscopy and timing registered to GPS time and position, with high throughput and relatively low background. The NICER project plans to implement a Guest Observer Program, which includes competitively selected user targets after the first year of flight operations. I will describe NICER and discuss ideas for potential Be/X-ray binary science.

18. Model Based Control of Moisture Sorption in a Historical Interior

Directory of Open Access Journals (Sweden)

P. Zítek

2005-01-01

Full Text Available This paper deals with a novel scheme for microclimate control in historical exhibition rooms, inhibiting moisture sorption phenomena that are inadmissible from the preventive conservation point of view. The impact of air humidity is the most significant harmful exposure for a great deal of the cultural heritage deposited in remote historical buildings. Leaving the interior temperature to run almost its spontaneous yearly cycle, the proposed non-linear model-based control protects exhibits from harmful variations in moisture content by compensating the temperature drifts with an adequate adjustment of the air humidity. Already implemented in a medieval interior since 1999, the proposed microclimate control has proved capable of permanently maintaining constant a desirable moisture content in organic or porous materials in the interior of a building.

19. Colour terms in the interior design process

OpenAIRE

Attiah, DY; Cheung, TLV; Westland, S; Bromilow, D

2015-01-01

Colour is a very important topic that interior designers need to consider. Considerable research has been conducted in the area of colour application in interior design; in this study we are concerned with colour terms in interior design, mainly the terms designers use and know about. Fifteen interior designers with varied professional backgrounds, but based in the Middle East (Saudi Arabia, Dubai, Bahrain, Lebanon, Egypt, and Turkey), were interviewed. Previously we reported that fourteen ou...

20. State Skill Standards: Housing and Interior Design

Science.gov (United States)

2008-01-01

Meeting the Housing and Interior Design Standards will provide students with skills for personal family life and towards becoming a professional in the interior design field. The mission of Housing and Interior Design education is to prepare students for family life, work life, and careers in the fashion industry by creating opportunities to…

1. Market Aspects of an Interior Design Program.

Science.gov (United States)

Gold, Judy E.

A project was conducted to evaluate a proposed interior design program in order to determine the marketability (job availability in the field of interior design and home furnishings merchandising) and the feasibility (educational requirements for entrance into the interior design and home furnishings merchandising job market) of the program. To…

2. Environmental Assessment for Building 88 Interior Demolition, Pearl Harbor Naval Complex, O'ahu, Hawaii

National Research Council Canada - National Science Library

2005-01-01

...) and ancillary equipment from the interior of Building 88, a former lubricating oil storage facility, and the related exposed piping underneath Mike wharves M3 and M4 at Merry Point, Pearl Harbor Naval Complex...

3. Physics of neutron star interiors

International Nuclear Information System (INIS)

Blaschke, D.

2001-01-01

Neutron stars are the densest observable bodies in our universe. Born during the gravitational collapse of luminous stars - a birth heralded by spectacular supernova explosions - they open a window on a world where the state of the matter and the strength of the fields are anything but ordinary. This book is a collection of pedagogical lectures on the theory of neutron stars, and especially their interiors, at the forefront of current research. It adresses graduate students and researchers alike, and should be particularly suitable as a text bridging the gap between standard textbook material and the research literature

4. Magnetohydrodynamics of neutron star interiors

International Nuclear Information System (INIS)

Easson, I.; Pethick, C.J.

1979-01-01

Magnetohydrodynamic equations for the charged particles in the fluid interior of a neutron star are derived from the Landau-Boltzmann kinetic equations. It is assumed that the protons are normal and the neutrons are superfluid. The dissipative processes associated with the weak interactions are shown to be negligible except in very hot neutron stars; we neglect them here. Among the topics discussed are: the influence of the neutron-proton nuclear force (Fermi liquid corrections) on the magnetohydrodynamics; the effects of the magnetic field on the pressure, viscosity, and heat conductivity tensors; the plasma equation of state; and the form of the generalized Ohm's law

5. Exoplanet's Figure and Its Interior

Science.gov (United States)

Mian, Zhang; Cheng-li, Huang

2018-01-01

Along with the development of the observing technology, the observation and study on the exoplanets' oblateness and apsidal precession have achieved significant progress. The oblateness of an exoplanet is determined by its interior density profile and rotation period. Between its Love number k2 and core size exists obviously a negative correlation. So oblateness and k2 can well constrain its interior structure. Starting from the Lane-Emden equation, the planet models based on different polytropic indices are built. Then the flattening factors are obtained by solving the Wavre's integro-differential equation. The result shows that the smaller the polytropic index, the faster the rotation, and the larger the oblateness. We have selected 469 exoplanets, which have simultaneously the observed or estimated values of radius, mass, and orbit period from the NASA (National Aeronautics and Space Administration) Exoplanet Archive, and calculated their flattening factors under the two assumptions: tidal locking and fixed rotation period of 10.55 hours. The result shows that the flattening factors are too small to be detected under the tidal locking assumption, and that 28% of exoplanets have the flattening factors larger than 0.1 under the fixed rotation period of 10.55 hours. The Love numbers under the different polytropic models are solved by the Zharkov's approach, and the relation between k2 and core size is discussed.

6. Injury, Interiority, and Isolation in Men's Suicidality.

Science.gov (United States)

Oliffe, John L; Creighton, Genevieve; Robertson, Steve; Broom, Alex; Jenkins, Emily K; Ogrodniczuk, John S; Ferlatte, Olivier

2017-07-01

Men's high suicide rates have been linked to individual risk factors including history of being abused as a child, single marital status, and financial difficulties. While it has also been suggested that the normative influences of hegemonic masculinities are implicated in men's suicide, the gendered experiences of male suicidality are poorly understood. In the current photovoice study, 20 men who previously had suicidal thoughts, plans, and/or attempts were interviewed as a means to better understanding the connections between masculinities and their experiences of suicidality. The study findings revealed injury, interiority, and isolation as interconnected themes characterizing men's suicidality. Injury comprised an array of childhood and/or cumulative traumas that fueled men's ruminating thoughts inhibiting recovery and limiting hopes for improved life quality. In attempting to blunt these traumas, many men described self-injuring through the overuse of alcohol and other drugs. The interiority theme revealed how suicidal thoughts can fuel hopelessness amid summonsing remedies from within. The challenges to self-manage, especially when experiencing muddled thinking and negative thought were evident, and led some participants to summons exterior resources to counter suicidality. Isolation included separateness from others, and was linked to abandonment issues and not having a job and/or partner. Self-isolating also featured as a protection strategy to avoid troubling others and/or reducing exposure to additional noxious stimuli. The study findings suggest multiple intervention points and strategies, the majority of which are premised on promoting men's social connectedness. The destigmatizing value of photovoice methods is also discussed.

7. La temperatura del interior de la tierra

Directory of Open Access Journals (Sweden)

Eslava R. Jesús A.

1993-10-01

Full Text Available The problem of defining the Earth interior temperature is analized from Heat Flow observations and the acceptance of convection processes in the mantle. Comparative analyses of thermal, adiabatic, and melting point profiles, allow to obtain the optimum temperature profile, wich fits the seismic model of a liquid external core.

EI problema de definir la temperatura del interior de la Tierra, se analiza a partir de las observaciones del flujo térmico y la aceptación de procesos de convección en el manto.

Análisis comparativos de perfiles térmicos, adiabáticos y de puntos de fusión, permiten obtener un perfil óptimo de distribución de temperaturas, que además satisface la observación sísmica de un núcleo externo líquido.

8. Simulation on a car interior aerodynamic noise control based on statistical energy analysis

Science.gov (United States)

Chen, Xin; Wang, Dengfeng; Ma, Zhengdong

2012-09-01

How to simulate interior aerodynamic noise accurately is an important question of a car interior noise reduction. The unsteady aerodynamic pressure on body surfaces is proved to be the key effect factor of car interior aerodynamic noise control in high frequency on high speed. In this paper, a detail statistical energy analysis (SEA) model is built. And the vibra-acoustic power inputs are loaded on the model for the valid result of car interior noise analysis. The model is the solid foundation for further optimization on car interior noise control. After the most sensitive subsystems for the power contribution to car interior noise are pointed by SEA comprehensive analysis, the sound pressure level of car interior aerodynamic noise can be reduced by improving their sound and damping characteristics. The further vehicle testing results show that it is available to improve the interior acoustic performance by using detailed SEA model, which comprised by more than 80 subsystems, with the unsteady aerodynamic pressure calculation on body surfaces and the materials improvement of sound/damping properties. It is able to acquire more than 2 dB reduction on the central frequency in the spectrum over 800 Hz. The proposed optimization method can be looked as a reference of car interior aerodynamic noise control by the detail SEA model integrated unsteady computational fluid dynamics (CFD) and sensitivity analysis of acoustic contribution.

9. The challenge to explore the Brazilian interior basins; O desafio da exploracao das bacias interiores brasileiras

Energy Technology Data Exchange (ETDEWEB)

Bacoccoli, Giuseppe [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia; Guimaraes, Paulo Buarque [Organizacao da Industria do Petroleo (ONIP), Rio de Janeiro, RJ (Brazil)

2004-07-01

Due to the development of the fields, already discovered in the deep waters of the Southeastern Atlantic Margin, the Brazilian domestic production will shortly be equivalent to the consumption. Despite reaching this goal, the exploration of large interior basins is still considered a challenge. Surprisingly, after the discoveries in the Solimoes Basin, as well after the opening of the Brazilian Petroleum Sector in 1997, the present level of the exploration activities in these basins is far below the previous historical averages. The available data are still now considered too scarce, to perform a proper evaluation. Apparently, a vicious circle has been established: due to the a priori low attractiveness new data are not acquired and because the lack of new data the attractiveness cannot be modified nor improved. The Parnaiba Basin is usually mentioned as an example of this poor amount of data. A modest coverage of ancient 2D seismic lines, and obsolete aero magnetic survey and thirty one exploratory wells, mostly located without geophysical support, represents all the available data in this vast basin with an area over 600,000 sq km. Recent regional geologic interpretations in such interior basins, as in Solimoes, Parana and also Parnaiba, are pointing out the presence of remarkable intraplate tectonic events, successively reactivated along the geologic time. It is now intended that these events can play an important role in the control of the petroleum system and in focalizing the new exploration activities. However, efforts should be applied in the revision of some regulatory rules, in Brazil, in order to better stimulate the onshore exploration and particularly the exploration of the interior basins. As recommended by the new Brazilian Petroleum Law, part of the government takes shall be effectively applied to acquire more geologic and geophysical data in the onshore areas (author)

10. Traversing the interior landscape: five dialogues in existential space

OpenAIRE

Roes, Remco

2016-01-01

“Traversing the interior landscape: five dialogues in existential space” examines how existing spaces can be used as a basis for their rearrangement into meaningful, exitential (‘wezenlijke’) places. The research consists of a textual part and an artistic part (a series of works and exhibitions, including a retrospective on show in CIAP (Hasselt) from december 2015 – march 2016). One of the innovative aspects of this research is the unique methodology that was used. Through the point of vi...

11. Surface and interior of Venus

Energy Technology Data Exchange (ETDEWEB)

Masursky, H [U.S. Geological Survey, Flagstaff, Arizona, USA; Kaula, W M [California Univ., Los Angeles (USA); McGill, G E [Massachusetts Univ., Amherst (USA); Pettengill, G H; Shapiro, I I [Massachusetts Inst. of Tech., Cambridge (USA). Dept. of Earth and Planetary Sciences; Phillips, R J [Jet Propulsion Lab., Pasadena, Calif. (USA); Russell, C T [California Univ., Los Angeles (USA). Inst. of Geophysics and Planetary Physics; Schubert, G [California Univ., Los Angeles (USA)

1977-06-01

12. Interior operators and topological connectedness | Castellini ...

African Journals Online (AJOL)

A categorical notion of interior operator is used in topology to define connectedness and disconnectedness with respect to an interior operator. A commutative diagram of Galois connections is used to show a relationship between these notions and Arhangelskii and Wiegandt's notions of connectedness and ...

13. Black Hole Interior in Quantum Gravity.

Science.gov (United States)

Nomura, Yasunori; Sanches, Fabio; Weinberg, Sean J

2015-05-22

We discuss the interior of a black hole in quantum gravity, in which black holes form and evaporate unitarily. The interior spacetime appears in the sense of complementarity because of special features revealed by the microscopic degrees of freedom when viewed from a semiclassical standpoint. The relation between quantum mechanics and the equivalence principle is subtle, but they are still consistent.

14. Interior Design Students Perceptions of Sustainability

Science.gov (United States)

Stark, Johnnie; Park, Jin Gyu

2016-01-01

Purpose: This longitudinal study assessed student perceptions of sustainable design issues in the context of an accredited interior design program. Although literature exists documenting the integration of sustainable strategies into interior design curriculum, more analysis is needed to determine the impact of program experiences on students'…

15. Present problems of the solar interior

International Nuclear Information System (INIS)

Roxburgh, I.W.

1986-01-01

The standard model of solar evolution is reviewed and a number of problems highlighted. A fundamental question is whether there is any mixing of matter in the central regions, since such mixing could radically alter the model of the present Sun and modify our understanding of the evolution of other stars. Standard models of solar evolution become unstable to /sup 3/He driven global oscillations at an age of 3 x 10/sup 8/ years and this may drive some mixing, even if this is not the case the finite amptitude limit of these oscillations is likely to produce modifications in the standard model. Convective overshooting at the bottom of the outer convective zone leads to an increased depth of this zone and small changes in the interior. It is pointed out that the young Sun had a /sup 12/C driven convective core whose extent and duration depends on the extend of overshooting. Such a core is likely to produce a magnetic field which will affect the internal dynamics. The internal rotation of the sun remains an enigma and absence of knowledge of any internal magnetic field makes it difficult to study the problem. Rotationally driven instabilities are ineffective in the central chemically inhomogeneous regions but may contribute to the inward diffusion of lithium from the convective zone. These and other problems are considered, but few solutions are proposed

16. The Architectonic Experience of Body and Space in Augmented Interiors

Science.gov (United States)

Pasqualini, Isabella; Blefari, Maria Laura; Tadi, Tej; Serino, Andrea; Blanke, Olaf

2018-01-01

The environment shapes our experience of space in constant interaction with the body. Architectonic interiors amplify the perception of space through the bodily senses; an effect also known as embodiment. The interaction of the bodily senses with the space surrounding the body can be tested experimentally through the manipulation of multisensory stimulation and measured via a range of behaviors related to bodily self-consciousness. Many studies have used Virtual Reality to show that visuotactile conflicts mediated via a virtual body or avatar can disrupt the unified subjective experience of the body and self. In the full-body illusion paradigm, participants feel as if the avatar was their body (ownership, self-identification) and they shift their center of awareness toward the position of the avatar (self-location). However, the influence of non-bodily spatial cues around the body on embodiment remains unclear, and data about the impact of architectonic space on human perception and self-conscious states are sparse. We placed participants into a Virtual Reality arena, where large and narrow virtual interiors were displayed with and without an avatar. We then applied synchronous or asynchronous visuotactile strokes to the back of the participants and avatar, or, to the front wall of the void interiors. During conditions of illusory self-identification with the avatar, participants reported sensations of containment, drift, and touch with the architectonic environment. The absence of the avatar suppressed such feelings, yet, in the large space, we found an effect of continuity between the physical and the virtual interior depending on the full-body illusion. We discuss subjective feelings evoked by architecture and compare the full-body illusion in augmented interiors to architectonic embodiment. A relevant outcome of this study is the potential to dissociate the egocentric, first-person view from the physical point of view through augmented architectonic space. PMID

17. The Architectonic Experience of Body and Space in Augmented Interiors.

Science.gov (United States)

Pasqualini, Isabella; Blefari, Maria Laura; Tadi, Tej; Serino, Andrea; Blanke, Olaf

2018-01-01

The environment shapes our experience of space in constant interaction with the body. Architectonic interiors amplify the perception of space through the bodily senses; an effect also known as embodiment. The interaction of the bodily senses with the space surrounding the body can be tested experimentally through the manipulation of multisensory stimulation and measured via a range of behaviors related to bodily self-consciousness. Many studies have used Virtual Reality to show that visuotactile conflicts mediated via a virtual body or avatar can disrupt the unified subjective experience of the body and self. In the full-body illusion paradigm, participants feel as if the avatar was their body (ownership, self-identification) and they shift their center of awareness toward the position of the avatar (self-location). However, the influence of non-bodily spatial cues around the body on embodiment remains unclear, and data about the impact of architectonic space on human perception and self-conscious states are sparse. We placed participants into a Virtual Reality arena, where large and narrow virtual interiors were displayed with and without an avatar. We then applied synchronous or asynchronous visuotactile strokes to the back of the participants and avatar, or, to the front wall of the void interiors. During conditions of illusory self-identification with the avatar, participants reported sensations of containment, drift, and touch with the architectonic environment. The absence of the avatar suppressed such feelings, yet, in the large space, we found an effect of continuity between the physical and the virtual interior depending on the full-body illusion. We discuss subjective feelings evoked by architecture and compare the full-body illusion in augmented interiors to architectonic embodiment. A relevant outcome of this study is the potential to dissociate the egocentric, first-person view from the physical point of view through augmented architectonic space.

18. The Architectonic Experience of Body and Space in Augmented Interiors

Directory of Open Access Journals (Sweden)

Isabella Pasqualini

2018-04-01

Full Text Available The environment shapes our experience of space in constant interaction with the body. Architectonic interiors amplify the perception of space through the bodily senses; an effect also known as embodiment. The interaction of the bodily senses with the space surrounding the body can be tested experimentally through the manipulation of multisensory stimulation and measured via a range of behaviors related to bodily self-consciousness. Many studies have used Virtual Reality to show that visuotactile conflicts mediated via a virtual body or avatar can disrupt the unified subjective experience of the body and self. In the full-body illusion paradigm, participants feel as if the avatar was their body (ownership, self-identification and they shift their center of awareness toward the position of the avatar (self-location. However, the influence of non-bodily spatial cues around the body on embodiment remains unclear, and data about the impact of architectonic space on human perception and self-conscious states are sparse. We placed participants into a Virtual Reality arena, where large and narrow virtual interiors were displayed with and without an avatar. We then applied synchronous or asynchronous visuotactile strokes to the back of the participants and avatar, or, to the front wall of the void interiors. During conditions of illusory self-identification with the avatar, participants reported sensations of containment, drift, and touch with the architectonic environment. The absence of the avatar suppressed such feelings, yet, in the large space, we found an effect of continuity between the physical and the virtual interior depending on the full-body illusion. We discuss subjective feelings evoked by architecture and compare the full-body illusion in augmented interiors to architectonic embodiment. A relevant outcome of this study is the potential to dissociate the egocentric, first-person view from the physical point of view through augmented

19. A three-point Taylor algorithm for three-point boundary value problems

NARCIS (Netherlands)

J.L. López; E. Pérez Sinusía; N.M. Temme (Nico)

2011-01-01

textabstractWe consider second-order linear differential equations $\\varphi(x)y''+f(x)y'+g(x)y=h(x)$ in the interval $(-1,1)$ with Dirichlet, Neumann or mixed Dirichlet-Neumann boundary conditions given at three points of the interval: the two extreme points $x=\\pm 1$ and an interior point

20. Computer vision based room interior design

Science.gov (United States)

2015-12-01

This paper introduces a new application of computer vision. To the best of the author's knowledge, it is the first attempt to incorporate computer vision techniques into room interior designing. The computer vision based interior designing is achieved in two steps: object identification and color assignment. The image segmentation approach is used for the identification of the objects in the room and different color schemes are used for color assignment to these objects. The proposed approach is applied to simple as well as complex images from online sources. The proposed approach not only accelerated the process of interior designing but also made it very efficient by giving multiple alternatives.

1. Titan's interior from Cassini-Huygens

Science.gov (United States)

Tobie, G.; Baland, R.-M.; Lefevre, A.; Monteux, J.; Cadek, O.; Choblet, G.; Mitri, G.

2013-09-01

the obliquity. To derive the possible density profile, the obliquity is computed from a Cassini state model for a satellite with an internal liquid layer, each layer having an ellipsoidal shape consistent with the measured surface shape and gravity field [7]. We show that, once the observed surface flattening is taken into account, the measured obliquity can be reproduced only for internal models with a dense ocean (between 1275 and 1350 kg.m-3) above a differentiated interior with a full separation of rock and ice [7]. We obtain normalized moments of inertia between 0.31 and 0.33, significantly lower than the expected hydrostatic value (0.34). The tidal Love number is also found to be mostly sensitive to the ocean density and to a lesser extent the ice shell thickness. By combining obliquity and tidal Love number constraints, we show that the thickness of the outer ice shell is at least 40 km and the ocean thickness is less than 100 km, with an averaged density of 1275-1350 kg.m-3. Such a high density indicates that the ocean may contain a significant fraction of salts. Our calculations also imply that there is a significant difference of flattening between the surface and the ice/ocean interface. This is possible only if the ice layer is viscous enough to limit relaxation, as indicated above. This is also consistent with an ocean enriched in salts for which the crystallization point can be several tens of degree below the crystallization point of pure water system. The elevated density (> 3800 kg.m-3) found for the rocky core further suggests that Titan might have a differentiated iron core. The rocky core is likely fully dehydrated at present, suggesting warm conditions during most of its evolution. All the water contained in the deep interior has probably been expelled to the outer regions, thus potentially explaining the salt enrichments.

2. Interior Design's Role in Educational Specifications.

Science.gov (United States)

Keller, Mary Ann

1986-01-01

An experienced interior designer, equipped with a well-written educational specification, will specify the best materials and coordinate colors, materials, and furnishings in line with the district's budget. (MLF)

3. Tipping Point

Medline Plus

Full Text Available ... en español Blog About OnSafety CPSC Stands for Safety The Tipping Point Home > 60 Seconds of Safety (Videos) > The Tipping Point The Tipping Point by ... danger death electrical fall furniture head injury product safety television tipover tv Watch the video in Adobe ...

4. Penerapan Interior Branding pada Hotel Yello

OpenAIRE

Gunawan, Astri Indrawati

2017-01-01

The development of entertainment and tourism in Surabaya has lead to increasing of tourist arrival. This condition makes hotel businesses flourishing. The 3 star hotel is currently the best-selling hotel due to adequate facilities at current economic level. To cope with the competition, many 3 star hotels applied branding in the interior. Interior branding is formed not only from the visual beauty, but rather to the room's atmosphere that contains stories and unique messages to influence the ...

5. Discovering the interior of black holes

Science.gov (United States)

Brustein, Ram; Medved, A. J. M.; Yagi, K.

2017-12-01

The detection of gravitational waves (GWs) from black hole (BH) mergers provides an inroad toward probing the interior of astrophysical BHs. The general-relativistic description of the BH interior is that of empty spacetime with a (possibly) singular core. Recently, however, the hypothesis that the BH interior does not exist has been gaining traction, as it provides a means for resolving the BH information-loss problem. Here, we propose a simple method for answering the following question: Does the BH interior exist and, if so, does it contain some distribution of matter or is it mostly empty? Our proposal is premised on the idea that, similar to the case of relativistic, ultracompact stars, any BH-like object whose interior has some matter distribution should support fluid modes in addition to the conventional spacetime modes. In particular, the Coriolis-induced Rossby (r-) modes, whose spectrum is mostly insensitive to the composition of the interior matter, should be a universal feature of such BH-like objects. In fact, the frequency and damping time of these modes are determined by only the object's mass and speed of rotation. The r-modes oscillate at a lower frequency, decay at a slower rate, and produce weaker GWs than do the spacetime modes. Hence, they imprint a model-insensitive signature of a nonempty interior in the GW spectrum resulting from a BH merger. We find that future GW detectors, such as Advanced LIGO with its design sensitivity, have the potential of detecting such r-modes if the amount of GWs leaking out quantum mechanically from the interior of a BH-like object is sufficiently large.

6. Project management in interior design services

OpenAIRE

Şahinoglu, Alp

1997-01-01

Ankara : Bilkent University, Department of Interior Architecture and Environmental Design and Institute of Fine Arts, 1997. Thesis (Master's) -- Bilkent University, 1997. Includes bibliographical references. In this study, the concept of project management is analyzed within the framework of interior design services. Project management has been defined as the managing and coordination of all human and physical resources, in order to accomplish the predetermined goals (aim of the proj...

7. Interior transmission eigenvalues of a rectangle

International Nuclear Information System (INIS)

Sleeman, B D; Stocks, D C

2016-01-01

The problem of scattering of acoustic waves by an inhomogeneous medium is intimately connected with so called inside–outside duality, in which the interior transmission eigenvalue problem plays a fundamental role. Here a study of the interior transmission eigenvalues for rectangular domains of constant refractive index is made. By making a nonstandard use of the classical separation of variables technique both real and complex eigenvalues are determined. (paper)

8. The State of Environmentally Sustainable Interior Design Practice

OpenAIRE

Mihyun Kang; Denise A. Guerin

2009-01-01

Problem statement: Research that investigates how interior designers use environmentally sustainable interior design criteria in their design solutions has not been done. To provide a base to develop education strategies for sustainable interior design, this study examined the state of environmentally sustainable interior design practice. Approach: A national, Internet-based survey of interior design practitioners was conducted. To collect data, the random sample of US interior design practit...

9. CALCULATION OF INDUCTANCE OF THE INTERIOR PERMANENT MAGNET SYNCHRONOUS MOTOR

Directory of Open Access Journals (Sweden)

Phyong Le Ngo

2017-01-01

Full Text Available Interior permanent magnet synchronous motor (IPMSM refers to salient-pole synchronous motors, characterized by inequality of inductances of longitudinal (d and transverse (q axes. Electromagnetic torque of IPMSM consists of two components: active torque and reactive torque; the latter depends on inductances of d and q axes. An analytical method to calculate own inductances and mutual inductances of a three-phase IPMSM is presented. Distributed windings of the stator are substituted by equivalent sine distributed windings. An interior permanent magnets rotor is substituted by an equivalent salient-pole rotor. Sections of a magnetic circuit comprising interior permanent magnets, air barriers and steel bridges are substituted by equivalent air-gap. The expressions of the magnetic induction created by current of the stator windings at each point of the air gap as well as of magnetic flux linkage of the stator windings have been obtained. The equations of the self-inductances of phases A, B, C, and of inductance of mutual induction are determined from magnetic flux linkage. The inductance of the d and q axes have been obtained as a result of transformation of the axes abc–dq. The results obtained with the use of the proposed analytical method and the finite element method are presented in the form of a graph; the calculations that have been obtained by these two methods were compared.

10. Determining building interior structures using compressive sensing

Science.gov (United States)

Lagunas, Eva; Amin, Moeness G.; Ahmad, Fauzia; Nájar, Montse

2013-04-01

We consider imaging of the building interior structures using compressive sensing (CS) with applications to through-the-wall imaging and urban sensing. We consider a monostatic synthetic aperture radar imaging system employing stepped frequency waveform. The proposed approach exploits prior information of building construction practices to form an appropriate sparse representation of the building interior layout. We devise a dictionary of possible wall locations, which is consistent with the fact that interior walls are typically parallel or perpendicular to the front wall. The dictionary accounts for the dominant normal angle reflections from exterior and interior walls for the monostatic imaging system. CS is applied to a reduced set of observations to recover the true positions of the walls. Additional information about interior walls can be obtained using a dictionary of possible corner reflectors, which is the response of the junction of two walls. Supporting results based on simulation and laboratory experiments are provided. It is shown that the proposed sparsifying basis outperforms the conventional through-the-wall CS model, the wavelet sparsifying basis, and the block sparse model for building interior layout detection.

11. Lidar Point Cloud - USGS National Map 3DEP Downloadable Data Collection

Data.gov (United States)

U.S. Geological Survey, Department of the Interior — This data collection consists of Lidar Point Cloud (LPC) projects as provided to the USGS. These point cloud files contain all the original lidar points collected,...

12. Critical review of LEED system for rating sustainability of architecture of commercial interiors

Directory of Open Access Journals (Sweden)

Stevanović Sanja

2010-01-01

Full Text Available The LEED rating system for sustainability of architecture has gained large marketing potential in USA and became one of main ways American builders are attacking ecological challenges. In this paper the LEED rating system for commercial interiors is critically reviewed, pointing out its positive - focus on integrated design process - and negative impacts - low thresholds for highest ratings and tendency to gain LEED rating with projects that hardly pass the thresholds, largely neglecting the principles of energy efficiency. Based on a few prominent LEED platinum examples, the beginnings of a LEED style of designing interiors in historical landmark buildings are pointed out as well.

13. Fixed Points

Home; Journals; Resonance – Journal of Science Education; Volume 5; Issue 5. Fixed Points - From Russia with Love - A Primer of Fixed Point Theory. A K Vijaykumar. Book Review Volume 5 Issue 5 May 2000 pp 101-102. Fulltext. Click here to view fulltext PDF. Permanent link:

14. Tipping Point

Medline Plus

Full Text Available ... OnSafety CPSC Stands for Safety The Tipping Point Home > 60 Seconds of Safety (Videos) > The Tipping Point ... 24 hours a day. For young children whose home is a playground, it’s the best way to ...

15. Tipping Point

Medline Plus

Full Text Available ... 60 Seconds of Safety (Videos) > The Tipping Point The Tipping Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture head injury product safety television tipover tv Watch the video in Adobe Flash ...

16. The Prefabricated Interior Design Studio: An Exploration into the History and Sustainability of Interior Prefabrication

Science.gov (United States)

Schneiderman, Deborah; Freihoefer, Kara

2013-01-01

This article examines the integration of prefabrication into an interior design studio. A review of the literature revealed that while there is a paucity of categorical research focused on this subject, the subject is historically significant with an abundance of evidence regarding the prefabrication of the interior environment dating back…

17. Interior design. Mastering the master plan.

Science.gov (United States)

Mesbah, C E

1995-10-01

Reflecting on the results of the survey, this proposed interior design master planning process addresses the concerns and issues of both CEOs and facility managers in ways that focus on problem-solving strategies and methods. Use of the interior design master plan process further promotes the goals and outcomes expressed in the survey by both groups. These include enhanced facility image, the efficient selection of finishes and furnishings, continuity despite staff changes, and overall savings in both costs and time. The interior design master plan allows administrators and facility managers to anticipate changes resulting from the restructuring of health care delivery. The administrators and facility managers are then able to respond in ways that manage those changes in the flexible and cost-effective manner they are striving for. This framework permits staff members to concentrate their time and energy on the care of their patients--which is, after all, what it's all about.

18. Inequivalence of interior and exterior dynamical problems

International Nuclear Information System (INIS)

Santilli, R.M.

1991-09-01

We begin a series of notes with the review of the historical distinction by Lagrange, Hamilton, Jacobi and other Founding Fathers of analytic dynamics, between the exteriordynamical problem, consisting of motion in vacuum under action-at-a-distance interactions, and the interior dynamical problem, consisting of motion within a resistive medium with the additional presence of contact, nonlinear, nonlocal and nonhamiltonian internal forces. After recalling some of the historical reasons that led to the contemporary, virtually complete restriction of research to the exterior problem, we show that the interior dynamical problem cannot be reduced to the exterior one. This establishes the open character of the central objective of these notes: the identification of the space-time symmetries and relativities that are applicable to interior, nonlinear, nonlocal and nonhamiltonian systems. (author). 29 refs

19. Penerapan Psikologi Desain pada Elemen Desain Interior

Directory of Open Access Journals (Sweden)

Budi Setiawan

2014-10-01

Full Text Available One of main interior designer’s assignments is to solve the problem within the facility. Problems may occur because the activities of design decision had done or will be done on the facility are not maximized. This problem can be reduced by rethinking the design through psychology design. Utilizing psychology design will help designer decide a better judgment of objects that affects the person using it in routine. The example of interior objects is wall, door, floor, color, and other elements of interior. Desk research method was used to support this article trough data collection from books and other professional institution websites. At the end, the conclusion of this article does not directly impact the result since it took time to persuade judgment of the user, but positively it will construct designer to rethink the design object.

20. Perancangan Interior Museum Film Indonesia Di Surabaya

OpenAIRE

Limantoro, Lim Renawati

2013-01-01

Surabaya is a city with a thriving cultural variety with a pluralistic society where people in Surabaya is more modern that easy to accept new things that developed in the community. Museum is a public place so that the necessary interior educative and informative and can be used as a sports-themed Indonesian films. The purpose of designing the interior of the film museum in Surabaya this is a venue to preserve Indonesian films and give knowledge to the people of Surabaya on the world of cine...

1. Dew Point

OpenAIRE

Goldsmith, Shelly

1999-01-01

Dew Point was a solo exhibition originating at PriceWaterhouseCoopers Headquarters Gallery, London, UK and toured to the Centre de Documentacio i Museu Textil, Terrassa, Spain and Gallery Aoyama, Tokyo, Japan.

2. Tipping Point

Medline Plus

Full Text Available ... Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture head injury product safety television tipover tv Watch the video in Adobe Flash ...

3. Tipping Point

Science.gov (United States)

... Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture head injury product safety television tipover tv Watch the video in Adobe Flash ...

4. Tipping Point

Medline Plus

Full Text Available ... Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture head ... see news reports about horrible accidents involving young children and furniture, appliance and tv tip-overs. The ...

5. Tipping Point

Medline Plus

Full Text Available ... Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture head ... TV falls with about the same force as child falling from the third story of a building. ...

6. Tipping Point

Medline Plus

Full Text Available ... Tipping Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture ... about horrible accidents involving young children and furniture, appliance and tv tip-overs. The force of a ...

7. Reflective coatings for interior and exterior of buildings and improving thermal performance

International Nuclear Information System (INIS)

Joudi, Ali; Svedung, Harald; Cehlin, Mathias; Rönnelid, Mats

2013-01-01

Highlights: ► Increase building energy efficiency by optimizing surface optical properties. ► Study different scenarios with both interior and exterior reflective coatings. ► Combined thermal effect of both interior and exterior reflective coatings. -- Abstract: The importance of reducing building energy usage and thriving for more energy efficient architectures, has nurtured creative solutions and smart choices of materials in the last few decades. Among those are optimizing surface optical properties for both interior and exterior claddings of the building. Development in the coil-coating steel industries has now made it possible to allocate correct optical properties for steel clad buildings with improved thermal performance. Although the importance of the exterior coating and solar gain are thoroughly studied in many literatures, the effect of interior cladding are less tackled, especially when considering a combination of both interior and exterior reflective coatings. This paper contemplates the thermal behavior of small cabins with reflective coatings on both interior and exterior cladding, under different conditions and climates with the aim to clarify and point out to the potential energy saving by smart choices of clad coatings.

8. Climatology of the interior Columbia River basin.

Science.gov (United States)

Sue A. Ferguson

1999-01-01

This work describes climate means and trends in each of three major ecological zones and 13 ecological reporting units in the interior Columbia River basin. Widely differing climates help define each major zone and reporting unit, the pattern of which is controlled by three competing air masses: marine, continental, and arctic. Paleoclimatic evidence and historical...

9. resonant inverter supplied interior permanent magnet (ipm)

African Journals Online (AJOL)

user

[5] Zhenyue Hong, “DC-voltage link resonant inverters”, Department of Electrical and. Electronic Engineering University of. Canterbury, New Zealand. [6] Kalyan Kumar Halder, Naruttam Kumar Roy and B.C. Ghosh, “Position Sensorless. Control for an Interior Permanent Magnet. Synchronous Motor SVM Drive with ANN.

10. The interiors of the giant planets - 1983

International Nuclear Information System (INIS)

Smoluchowski, R.

1983-01-01

The last few years brought progress in understanding the interiors of the giant planets especially of the two larger ones which have been visited by Pioneer and Voyager spacecraft. An analysis of the formation of the giant planets also helped to clarify certain important common features. The presently available model of Jupiter is still based on certain somewhat bothersome approximations but it appears to satisfy the main observational constraints. Saturn's interior is much better understood than it was previously although the quantitative aspects of the role of the miscibility gap in the hydrogen-helium system have not yet been entirely resolved. Much attention has been directed at the interiors of Uranus and Neptune and the outstanding question appears to be the location and the amount of ices and methane present in their outer layers. Both the two- and the three-layer models are moderately successful. Serious difficulties arise from the considerable uncertainties concerning the rotational periods of both planets. Also the estimates of the internal heat fluxes and of the magnetic fields of both planets are not sufficiently certain. It is hoped that the forthcoming flyby of these two planets by a Voyager spacecraft will provide important new data for a future study of their interiors. (Auth.)

11. Discussion on interior greening decoration of residence

Science.gov (United States)

Tong, ZhiNeng

2018-02-01

Green plants bring endless natural energy into the room. This paper introduces the functions, principles and functions of indoor greening decoration from different angles. Its conclusion is that it has become an important measure to improve the living environment of the people, and through the interior greening decoration to create a harmonious living space of architecture, human and nature.

12. Building of Requirement: Liberating Academic Interior Architecture

Science.gov (United States)

McLane, Yelena; Dawkins, Jim

2014-01-01

The authors focus on the strategies employed in the recent renovation of the William Johnston Building at Florida State University, in which the historical exterior was preserved, while the interiors were adapted to new functions as classrooms, study centers, and common spaces with intentionally undefined purposes. The building's various use…

13. Calidad del aire interior en las escuelas

Science.gov (United States)

EPA ha desarrollado el Programa de Herramientas de Calidad del Aire Interior para las Escuelas para reducir la exposición a los contaminantes ambientales en las mismas a través de la adopción voluntaria de las prácticas para manejar la calidad del aire int

14. Potential for forest products in interior Alaska.

Science.gov (United States)

George R. Sampson; Willem W.S. van Hees; Theodore S. Setzer; Richard C. Smith

1988-01-01

Future opportunities for producing Alaska forest products were examined from the perspective of timber supply as reported in timber inventory reports and past studies of forest products industry potential. The best prospects for increasing industrial production of forest products in interior Alaska are for softwood lumber. Current softwood lumber production in the...

15. Interior Pathways to Dissipation of Mesoscale Energy

Energy Technology Data Exchange (ETDEWEB)

Nadiga, Balasubramanya T. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2018-01-27

This talk at Goethe University asks What Powers Overturning Circulation? How does Ocean Circulation Equilibrate? There is a HUGE reservoir of energy sitting in the interior ocean. Can fluid dynamic instabilities contribute to the mixing required to drive global overturning circulation? Study designed to eliminate distinguished horizontal surfaces such as bottom BL and surface layer

16. Speed of sound in the solar interior

International Nuclear Information System (INIS)

Christensen-Dalsgaard, J.; Rhodes, E.J. Jr.

1985-01-01

Frequencies of solar 5-min oscillations can be used to determine directly the sound speed of the solar interior. The determination described does not depend on a solar model, but relies only on a simple asymptotic description of the oscillations in terms of trapped acoustic waves. (author)

17. Juno's first peek at Jupiter's interior

Science.gov (United States)

Guillot, Tristan; Miguel, Yamila; Hubbard, William B.; Kaspi, Yohai; Reese, Daniel; Helled, Ravit; Galanti, Eli; Militzer, Burkhard; Wahl, Sean; Folkner, William M.; Anderson, John; Iess, Luciano; Durante, Daniele; Parisi, Marzia; Stevenson, David J.

2017-04-01

The first orbits of Juno around Jupiter have led to a considerable improvement in the measurement of the planet's even gravitational moments. We will discuss how this leads to better constraints on jovian interior models, and how internal differential rotation and equations of state play an important part in the analysis.

18. Wall grid structure for interior scene synthesis

KAUST Repository

Xu, Wenzhuo; Wang, Bin; Yan, Dongming

2015-01-01

We present a system for automatically synthesizing a diverse set of semantically valid, and well-arranged 3D interior scenes for a given empty room shape. Unlike existing work on layout synthesis, that typically knows potentially needed 3D models

19. 24 CFR 3280.107 - Interior privacy.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Interior privacy. 3280.107 Section 3280.107 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued... privacy. Bathroom and toilet compartment doors shall be equipped with a privacy lock. ...

20. Qualitative and quantitative assessment of interior moisture buffering by enclosures

DEFF Research Database (Denmark)

Janssen, Hans; Roels, Staf

2009-01-01

The significance of interior humidity in attaining sustainable, durable, healthy and comfortable buildings is increasingly recognised. Given their significant interaction, interior humidity appraisals need a qualitative and/or quantitative assessment of interior moisture buffering. While the effe......The significance of interior humidity in attaining sustainable, durable, healthy and comfortable buildings is increasingly recognised. Given their significant interaction, interior humidity appraisals need a qualitative and/or quantitative assessment of interior moisture buffering. While...... the effective moisture penetration depth and effective capacitance models allow quantified assessment, their reliance on the ‘moisture penetration depth’ necessitates comprehensive material properties and hampers their application to multi-dimensional interior objects. On the other hand, while various recently...... an alternative basis for quantitative evaluation of interior moisture buffering by the effective moisture penetration depth and effective capacitance models. The presented methodology uses simple and fast measurements only and can also be applied to multimaterial and/or multidimensional interior elements....

1. The traveling salesman problem with few inner points

NARCIS (Netherlands)

Deineko, V.G.; Hoffmann, M.; Okamoto, Y.; Woeginger, G.J.; Chwa, K.Y.; Munro, J.I.

2004-01-01

We study the traveling salesman problem (TSP) in the 2-dimensional Euclidean plane. The problem is NP-hard in general, but trivial if the points are in convex position. In this paper, we investigate the influence of the number of inner points (i.e., points in the interior of the convex hull) on the

2. A numerical method to compute interior transmission eigenvalues

International Nuclear Information System (INIS)

Kleefeld, Andreas

2013-01-01

In this paper the numerical calculation of eigenvalues of the interior transmission problem arising in acoustic scattering for constant contrast in three dimensions is considered. From the computational point of view existing methods are very expensive, and are only able to show the existence of such transmission eigenvalues. Furthermore, they have trouble finding them if two or more eigenvalues are situated closely together. We present a new method based on complex-valued contour integrals and the boundary integral equation method which is able to calculate highly accurate transmission eigenvalues. So far, this is the first paper providing such accurate values for various surfaces different from a sphere in three dimensions. Additionally, the computational cost is even lower than those of existing methods. Furthermore, the algorithm is capable of finding complex-valued eigenvalues for which no numerical results have been reported yet. Until now, the proof of existence of such eigenvalues is still open. Finally, highly accurate eigenvalues of the interior Dirichlet problem are provided and might serve as test cases to check newly derived Faber–Krahn type inequalities for larger transmission eigenvalues that are not yet available. (paper)

3. Carleman estimates, observability inequalities and null controllability for interior degenerate nonsmooth parabolic equations

CERN Document Server

Fragnelli, Genni

2016-01-01

The authors consider a parabolic problem with degeneracy in the interior of the spatial domain, and they focus on observability results through Carleman estimates for the associated adjoint problem. The novelties of the present paper are two. First, the coefficient of the leading operator only belongs to a Sobolev space. Second, the degeneracy point is allowed to lie even in the interior of the control region, so that no previous result can be adapted to this situation; however, different cases can be handled, and new controllability results are established as a consequence.

4. Elemen Pembentuk Makna pada Sebuah Interior Arsitektur

Directory of Open Access Journals (Sweden)

Dila Hendrassukma

2012-10-01

Full Text Available Along with the increasing needs of the community, also increasing the need for space to accommodated those needs. With limited space available nowadays, it is not uncommon to change the old buildings’ function as a place to meet the social growing need of the space. However, it is must be remembered by architects and interior architects when changing the functions of a space that the old space has its own histories and particular meaning to people who had ever occupied it. Those histories and meanings should be included in the creation of the new function. Article gives and describes elements that need to be known in order to understand the sense of a space, such as drawing plans, scale, proportion, movement, transition and access that embodied in the architecture and interior space. Qualitative methods by literature study is used in the making of this article..

5. Electromagnetic sounding of the Earth's interior

CERN Document Server

Spichak, Viacheslav V

2015-01-01

Electromagnetic Sounding of the Earth's Interior 2nd edition provides a comprehensive up-to-date collection of contributions, covering methodological, computational and practical aspects of Electromagnetic sounding of the Earth by different techniques at global, regional and local scales. Moreover, it contains new developments such as the concept of self-consistent tasks of geophysics and , 3-D interpretation of the TEM sounding which, so far, have not all been covered by one book. Electromagnetic Sounding of the Earth's Interior 2nd edition consists of three parts: I- EM sounding methods, II- Forward modelling and inversion techniques, and III - Data processing, analysis, modelling and interpretation. The new edition includes brand new chapters on Pulse and frequency electromagnetic sounding for hydrocarbon offshore exploration. Additionally all other chapters have been extensively updated to include new developments. Presents recently developed methodological findings of the earth's study, including seism...

6. Recent advances in modeling stellar interiors (u)

Energy Technology Data Exchange (ETDEWEB)

Guzik, Joyce Ann [Los Alamos National Laboratory

2010-01-01

Advances in stellar interior modeling are being driven by new data from large-scale surveys and high-precision photometric and spectroscopic observations. Here we focus on single stars in normal evolutionary phases; we will not discuss the many advances in modeling star formation, interacting binaries, supernovae, or neutron stars. We review briefly: (1) updates to input physics of stellar models; (2) progress in two and three-dimensional evolution and hydrodynamic models; (3) insights from oscillation data used to infer stellar interior structure and validate model predictions (asteroseismology). We close by highlighting a few outstanding problems, e.g., the driving mechanisms for hybrid {gamma} Dor/{delta} Sct star pulsations, the cause of giant eruptions seen in luminous blue variables such as {eta} Car and P Cyg, and the solar abundance problem.

7. Process design (exterior – interior design)

OpenAIRE

2013-01-01

The design is a complex process of spatial organization and creative problem object. It switched to the study of complex natural conditions (analysis and evaluation) and the development of compositional solution structure of the object. Construction and shaping of all buildings whether it is exterior or interior, be it street, Square apartment building, park or greater forest massif, public facility (administrative buildings, hospitals, schools, galleries etc.), residential object (garsion...

8. Quantum state of the black hole interior

International Nuclear Information System (INIS)

Brustein, Ram; Medved, A.J.M.

2015-01-01

If a black hole (BH) is initially in an approximately pure state and it evaporates by a unitary process, then the emitted radiation will be in a highly quantum state. As the purifier of this radiation, the state of the BH interior must also be in some highly quantum state. So that, within the interior region, the mean-field approximation cannot be valid and the state of the BH cannot be described by some semiclassical metric. On this basis, we model the state of the BH interior as a collection of a large number of excitations that are packed into closely spaced but single-occupancy energy levels; a sort-of “Fermi sea” of all light-enough particles. This highly quantum state is surrounded by a semiclassical region that lies close to the horizon and has a non-vanishing energy density. It is shown that such a state looks like a BH from the outside and decays via gravitational pair production in the near-horizon region at a rate that agrees with the Hawking rate. We also consider the fate of a classical object that has passed through to the BH interior and show that, once it has crossed over the near-horizon threshold, the object meets its demise extremely fast. This result cannot be attributed to a “firewall”, as the trauma to the in-falling object only begins after it has passed through the near-horizon region and enters a region where semiclassical spacetime ends but the energy density is still parametrically smaller than Planckian.

9. Realization of FRC interior and exterior furniture

Science.gov (United States)

Šonka, Š.; Frantová, M.; Štemberk, P.; Havrda, J.; Janouch, P.

2017-09-01

This article deals with the implementation of fibre reinforced concrete for interior and exterior furniture. The use of fibre reinforced concrete for non-traditional and small structures brings some specifics in design and realization. These are, in particular, the design of a suitable mixture, the choice of the shape of the structure in relation to the technological possibilities of realization, the static effects and finally the actual production of the element.

10. Calidad ambiental interior: bienestar, confort y salud

Directory of Open Access Journals (Sweden)

Francisco Vargas Marcos

2005-01-01

11. Memahami Estetika dari Sudut Pandang Desain Interior

Directory of Open Access Journals (Sweden)

Yunida Sofiana

2015-07-01

Full Text Available The term aesthetic has always become part of design. Without aesthetic, design has just a functional object. Aesthetic in design, particularly in interior design, has been influenced by many factors, which are aesthetic value, aesthetic perception, and time frame. Aesthetic has subjective meaning related to time frame and objective meaning related to implementation of element and principles of design on aesthetic term. Aesthetic perception is how we judge and see the object using our own thinking and value. Time frame is where and when the aesthetic value happens. Interior design trend right now has been influenced by technology in many ways so the concept of modern design theme is always the best choice for designer. However, using modern theme as a design concept has to be implemented as a whole theme and related to aesthetical value so that the design will gain much appreciation from others. This paper used deductive method to explain the theory of aesthetic and the implementation of aesthetic value in interior design context. Design should speak louder than it looked.

12. Crane cabins' interior space multivariate anthropometric modeling.

Science.gov (United States)

Essdai, Ahmed; Spasojević Brkić, Vesna K; Golubović, Tamara; Brkić, Aleksandar; Popović, Vladimir

2018-01-01

Previous research has shown that today's crane cabins fail to meet the needs of a large proportion of operators. Performance and financial losses and effects on safety should not be overlooked as well. The first aim of this survey is to model the crane cabin interior space using up-to-date crane operator anthropometric data and to compare the multivariate and univariate method anthropometric models. The second aim of the paper is to define the crane cabin interior space dimensions that enable anthropometric convenience. To facilitate the cabin design, the anthropometric dimensions of 64 crane operators in the first sample and 19 more in the second sample were collected in Serbia. The multivariate anthropometric models, spanning 95% of the population on the basis of a set of 8 anthropometric dimensions, have been developed. The percentile method was also used on the same set of data. The dimensions of the interior space, necessary for the accommodation of the crane operator, are 1174×1080×1865 mm. The percentiles results for the 5th and 95th model are within the obtained dimensions. The results of this study may prove useful to crane cabin designers in eliminating anthropometric inconsistencies and improving the health of operators, but can also aid in improving the safety, performance and financial results of the companies where crane cabins operate.

13. Asymmetric interiors for small black holes

Energy Technology Data Exchange (ETDEWEB)

Kabat, Daniel [Department of Physics and Astronomy, Lehman College,City University of New York, Bronx NY 10468 (United States); Lifschytz, Gilad [Department of Mathematics, Faculty of Natural Science,University of Haifa, Haifa 31905 (Israel)

2016-08-16

We develop the representation of infalling observers and bulk fields in the CFT as a way to understand the black hole interior in AdS. We first discuss properties of CFT states which are dual to black holes. We then show that in the presence of a Killing horizon bulk fields can be decomposed into pieces we call ingoing and outgoing. The ingoing field admits a simple operator representation in the CFT, even inside a small black hole at late times, which leads to a simple CFT description of infalling geodesics. This means classical infalling observers will experience the classical geometry in the interior. The outgoing piece of the field is more subtle. In an eternal two-sided geometry it can be represented as an operator on the left CFT. In a stable one-sided geometry it can be described using entanglement via the PR construction. But in an evaporating black hole trans-horizon entanglement breaks down at the Page time, which means that for old black holes the PR construction fails and the outgoing field does not see local geometry. This picture of the interior allows the CFT to reconcile unitary Hawking evaporation with the classical experience of infalling observers.

14. The interior transmission spectrum in one dimension

International Nuclear Information System (INIS)

Hickmann, Kyle S

2012-01-01

This paper seeks conditions on acoustic profiles c(x) and b(x) which imply the existence of intervals free of transmission eigenvalues. The existence of intervals free of transmission eigenvalues has important implications in the question of unique recovery of the acoustic profile for inverse acoustic scattering theory using the linear sampling method and for the inverse source problem in thermoacoustic tomography. We examine the interior transmission spectrum relative to two acoustic profiles on the unit interval. This research includes the case when the difference of the two acoustic profiles changes sign and is, to the author's knowledge, the only work to date on the interior transmission spectrum allowing this behavior. It is shown that for a large class of acoustic profiles the transmission spectrum is asymptotically sparse. The spectrum exhibits three distinct types of behavior dependent on the relation of the two acoustic profiles. Numerical examples of each type of behavior are given which show how the transmission eigenvalues are distributed depending on the relation between c(x) and b(x). Our method of study is to reduce the interior transmission problem on [0, 1] to a problem of finding roots of a determinant of fundamental solutions to a Sturm–Liouville problem. The asymptotic expansion of solutions of the Sturm–Liouville problem then allows us to analyze properties of the transmission spectrum for large values of the wavenumber. (paper)

15. A demonstrated method for upgrading existing control room interiors

International Nuclear Information System (INIS)

Brice, R.M.; Terrill, D.; Brice, R.M.

1991-01-01

The main control room (MCR) of any nuclear power plant can justifiably be called the most important area staffed by personnel in the entire facility. The interior workstation configuration, equipment arrangement, and staff placement all affect the efficiency and habitability of the room. There are many guidelines available that describe various human factor principles to use when upgrading the environment of the MCR. These involve anthropometric standards and rules for placement of peripheral equipment. Due to the variations in plant design, however, hard-and-fast rules have not and cannot be standardized for retrofits in any significant way. How then does one develop criteria for the improvement of a MCR? The purpose of this paper is to discuss, from the designer's point of view, a method for the collection of information, development of criteria, and creation of a final design for a MCR upgrade. This method is best understood by describing the successful implementation at Tennessee Valley Authority's Sequoyah nuclear plant

16. Hiding the interior region of core-shell nanoparticles with quantum invisible cloaks

Science.gov (United States)

Lee, Jeng Yi; Lee, Ray-Kuang

2014-04-01

Based on the scattering cancellation, we provide a method not only making a nanoparticle nearly invisible, but also hiding its interior region from the outside probing matter wave. By applying the interplay among the nodal points of partial waves along with the concept of streamline in fluid dynamics for probability flux, a quantum invisible cloak to the electron transport in a host semiconductor is demonstrated by simultaneously guiding the probability flux outside a hidden region and keeping the total scattering cross section negligible. As the probability flux vanishes in the interior region, one can embed any materials inside a multiple core-shell nanoparticle without affecting physical observables from the outside. Our results reveal the possibility to design a protection shield layer for fragile interior parts from the impact of transport electrons.

17. An Evaluation of Automotive Interior Packages Based on Human Ocular and Joint Motor Properties

Science.gov (United States)

Tanaka, Yoshiyuki; Rakumatsu, Takeshi; Horiue, Masayoshi; Miyazaki, Tooru; Nishikawa, Kazuo; Nouzawa, Takahide; Tsuji, Toshio

This paper proposes a new evaluation method of an automotive interior package based on human oculomotor and joint-motor properties. Assuming the long-term driving situation in the express high way, the three evaluation indices were designed on i) the ratio of head motion at gazing the driving items; ii) the load torque for maintaining the standard driving posture; and iii) the human force manipulability at the end-point of human extremities. Experiments were carried out for two different interior packages with four subjects who have the special knowledge on the automobile development. Evaluation results demonstrate that the proposed method can quantitatively analyze the driving interior in good agreement with the generally accepted subjective opinion in the automobile industry.

18. Kajian Gaya Interior Pada Restoran Tip Top di Kota Medan

OpenAIRE

Kevin

2016-01-01

The purpose of this study was to identify / determine the style of interior design that is applied to the Tip Top Restaurant in Medan as well as the public perception of the interior arrangement of Tip Top Restaurant in Medan by using qualitative and quantitative research methods. Qualitative research methods now that the observation / observation, observation of interior elements Tip Top restaurant is analyzed based on the criteria of interior design, this is done in order to ...

19. Designing interior space for drivers of passenger vehicle

Directory of Open Access Journals (Sweden)

Spasojević-Brkić Vesna K.

2014-01-01

Full Text Available The current study is a review of our previous papers with certain improvements, so it proves the hypothesis that passenger vehicles are still not sufficiently adapted to man in terms of ergonomics, especially from the aspect of interior space. In the ergonomic adjustment of passenger vehicles, the limits of anthropomeasures and technical limitations, are the most important. The methodology mainly uses operative investigations, and the 'man-vehicle' system is optimized within existing limitations. Here, we also explain original methodology for modeling that space. The fact that there is a point '0' as the origin point of a coordinate system with x, y and z axes of the man-vehicle system, which can be considered to be more or less fixed, enabled us to determine more accurately the mechanical and mathematical codependence in this system. The paper also proves that the anthropomeasures of length have mechanical and mathematical functions which also determine the width, i.e. all three dimensions and provides the design of the space behind the windscreen glass, the position of the steering wheel and the position of the foot commands with space for feet and knees determined, as well as the total space which the driver occupies. It is proved that the floor-ceiling height of a vehicle is primarily affected by the anthropomeasures of seating height and lower leg, while width is affected by the anthropomeasures of lower and upper leg and only then by shoulder width, so that the interior space for the driver of a passenger vehicle is 1250 mm and the width for knees spread at seat level is 926 mm maximum.

20. 49 CFR 179.12 - Interior heater systems.

Science.gov (United States)

2010-10-01

... Design Requirements § 179.12 Interior heater systems. (a) Interior heater systems shall be of approved design and materials. If a tank is divided into compartments, a separate system shall be provided for... 49 Transportation 2 2010-10-01 2010-10-01 false Interior heater systems. 179.12 Section 179.12...

1. Temporal trends of forest interior conditions in the United States

Science.gov (United States)

Kurt Riitters; James. Wickham

2012-01-01

Nature's benefits derived from forest interior environments cannot be sustained if the natural capital of forest interior area is not sustained. We analyzed the spatial patterns of forest loss and gain for the conterminous United States from 2001 to 2006 to determine whether forest interior environments were maintained at five spatial scales. A 1.1 percent net...

2. Interior design students win two IDEC Student Design Competition awards

OpenAIRE

Watson-Bloch, Cathy

2005-01-01

Interior Design students in the School of Architecture + Design at Virginia Tech won two of the four awards presented in the 2004-2005 Interior Design Educators Council (IDEC) Student Design Competition. Winners were selected at the International IDEC Conference in Savannah, Ga. with Virginia Tech Interior Design students winning second place and honorable mention.

3. Space station interior design: Results of the NASA/AIA space station interior national design competition

Science.gov (United States)

Haines, R. F.

1975-01-01

The results of the NASA/AIA space station interior national design competition held during 1971 are presented in order to make available to those who work in the architectural, engineering, and interior design fields the results of this design activity in which the interiors of several space shuttle size modules were designed for optimal habitability. Each design entry also includes a final configuration of all modules into a complete space station. A brief history of the competition is presented with the competition guidelines and constraints. The first place award entry is presented in detail, and specific features from other selected designs are discussed. This is followed by a discussion of how some of these design features might be applied to terrestrial as well as space situations.

4. Interior Design 1992 Buyers Guide issue.

Science.gov (United States)

1992-01-30

The Interior Design Magazine Buyers Guide is compiled with you, the designer, in mind. So it's packed with the most comprehensive collection of sources available anyplace--arranged for fast, easy access. First, the Keyword Index presents all the Buyers Guide product categories alphabetically (see the first tab divider). Refer to the page number indicated in the Product Index (second tab divider) to view various manufacturers of products under each category heading. Addresses, phone and fax numbers, regional and international showroom/representatives are located in the A-Z Index (third tab divider) in alphabetical order. Consult the table of contents for trade associations, lighting consultants, marts, and other useful sections.

5. The Interiors of Jupiter and Saturn

Science.gov (United States)

Helled, Ravit

2018-05-01

Probing the interiors of the giant planets in our Solar System is not an easy task. This requires a set of observations combined with theoretical models that are used to infer the planetary composition and its depth dependence. The masses of Jupiter and Saturn are 318 and 96 Earth masses, respectively, and since a few decades, we know that they mostly consist of hydrogen and helium. It is the mass of heavy elements (all elements heavier than helium) that is not well determined, as well as its distribution within the planets. While the heavy elements are not the dominating materials in Jupiter and Saturn, they are the key for our understanding of their formation and evolution histories. The planetary internal structure is inferred to fit the available observational constraints including the planetary masses, radii, 1-bar temperatures, rotation rates, and gravitational fields. Then, using theoretical equations of states (EOSs) for hydrogen, helium, their mixtures, and heavier elements (typically rocks and/or ices), a structure model is developed. However, there is no unique solution for the planetary structure, and the results depend on the used EOSs and the model assumptions imposed by the modeler. Standard interior models of Jupiter and Saturn include three main regions: (1) the central region (core) that consists of heavy elements, (2) an inner metallic hydrogen envelope that is helium rich, and (3) an outer molecular hydrogen envelope depleted with helium. The distribution of heavy elements can be either homogenous or discontinuous between the two envelopes. Major model assumptions that can affect the derived internal structure include the number of layers, the heat transport mechanism within the planet (and its entropy), the nature of the core (compact vs. diluted), and the location/pressure where the envelopes are divided. Alternative structure models assume a less distinct division between the layers and/or a less non-homogenous distribution of the heavy

6. Int-Soft Interior Hyperideals of Ordered Semihypergroups

Directory of Open Access Journals (Sweden)

Asghar Khan

2017-07-01

Full Text Available The main theme of this paper is to study ordered semihypergroups in the context of int-soft interior hyperideals. In this paper, the notion of int-soft interior hyperideals are studied and their related properties are discussed. We present characterizations of interior hyperideals in terms of int-soft interior hyperideals. The concepts of int-soft hyperideals and int-soft interior hyperideals coincide in a regular as well as in intra-regular ordered semihypergroups. We prove that every int-soft hyperideal is an int-soft interior hyperideal but the converse is not true which is shown with help of an example. Furthermore we characterize simple ordered semihypergroups by means of int-soft hyperideals and int-soft interior hyperideals.

7. Conditional stability for a single interior measurement

International Nuclear Information System (INIS)

Honda, Naofumi; McLaughlin, Joyce; Nakamura, Gen

2014-01-01

An inverse problem to identify unknown coefficients of a partial differential equation by a single interior measurement is considered. The equation considered in this paper is a strongly elliptic second order scalar equation which can have complex coefficients in a bounded domain with C 2 boundary. We are given a single interior measurement. This means that we know a given solution of the forward equation in this domain. The equation includes some model equations arising from acoustics, viscoelasticity and hydrology. We assume that the coefficients are piecewise analytic. Our major result is the local Hölder stability estimate for identifying the unknown coefficients. If the unknown coefficient is a complex coefficient in the principal part of the equation, we assumed a condition which we name admissibility assumption for the real part and imaginary part of the difference of two complex coefficients. This admissibility assumption is automatically satisfied if the complex coefficients are real valued. For identifying either the real coefficient in the principal part or the coefficient of the 0th order of the equation, the major result implies global uniqueness for the identification. (paper)

8. 76 FR 37828 - Update to Indian Index Zone Price Points

Science.gov (United States)

2011-06-28

... to Indian Index Zone Price Points AGENCY: Office of Natural Resources Revenue, Interior. ACTION... (MMS) Minerals Revenue Management) is announcing an update to Indian index zone price points that will remove certain natural gas index prices from the Indian Index Zone calculation. These changes will impact...

9. On the interior of (quantum) black holes

International Nuclear Information System (INIS)

Torres, R.

2013-01-01

Different approaches to quantum gravity conclude that black holes may possess an inner horizon, in addition to the (quantum corrected) outer ‘Schwarzschild’ horizon. In this Letter we assume the existence of this inner horizon and explain the physical process that might lead to the tunneling of particles through it. It is shown that the tunneling would produce a flux of particles with a spectrum that deviates from the pure thermal one. Under the appropriate approximation the extremely high temperature of this horizon is calculated for an improved quantum black hole. It is argued that the flux of particles tunneled through the horizons affects the dynamics of the black hole interior leading to an endogenous instability

10. Interior design of the lunar outpost

Science.gov (United States)

Kennedy, Kriss J.

1990-01-01

This paper is part of an ongoing study on the interior design of a lunar outpost habitat facility. The concept presented represents the work done up to and including August 1989. This concept is part of NASA's ongoing effort to explore alternative options for planet surface systems habitation. Results of a volume analog study to determine the required pressurized volume are presented along with an internal layout of the habitat facility. The concept presented in this paper is a constructible lunar habitat that provides a living and working environment for a crew of 12. It is a 16-m diameter spherical pneumatic structure which contains 2145 cubic meters of volume. Five levels of living and working areas make up the 742 sq m of floor space. A 2-m vertical circulation shaft at the center allows for transfer of crew and equipment.

11. Interior beam searchlight semi-analytical benchmark

International Nuclear Information System (INIS)

Ganapol, Barry D.; Kornreich, Drew E.

2008-01-01

Multidimensional semi-analytical benchmarks to provide highly accurate standards to assess routine numerical particle transport algorithms are few and far between. Because of the well-established 1D theory for the analytical solution of the transport equation, it is sometimes possible to 'bootstrap' a 1D solution to generate a more comprehensive solution representation. Here, we consider the searchlight problem (SLP) as a multidimensional benchmark. A variation of the usual SLP is the interior beam SLP (IBSLP) where a beam source lies beneath the surface of a half space and emits directly towards the free surface. We consider the establishment of a new semi-analytical benchmark based on a new FN formulation. This problem is important in radiative transfer experimental analysis to determine cloud absorption and scattering properties. (authors)

12. Planetary Interior Modeling and Tectonic Implications

Science.gov (United States)

Phillips, R. J.

1985-01-01

A technique is described for estimating spectral admittance functions using Pioneer Venus gravity and topography data. These admittance functions provide a convenient means to carry out systematic geophysical studies over much of the surface of Venus with a variety of interior density models. The admittance functions are calculated in the observation space of line-of-sight (LOS) gravity. Both closed and open system petrological models are considered for the Tharsis region of Mars. An analytic theory for isostatic compensation on one-plate planet is applied, including membrane stresses in the lithosphere, self gravitation, and rotational ellipticity. Crucial to this stress modeling and also to the petrological modeling is the observation that the earliest fracturing seen in the Tharsis region is associated with isostatic stresses. The radial fractures that extend far from Tharsis are associated with an additional and/or a completely different mechanism.

13. Wall grid structure for interior scene synthesis

KAUST Repository

Xu, Wenzhuo

2015-02-01

We present a system for automatically synthesizing a diverse set of semantically valid, and well-arranged 3D interior scenes for a given empty room shape. Unlike existing work on layout synthesis, that typically knows potentially needed 3D models and optimizes their location through cost functions, our technique performs the retrieval and placement of 3D models by discovering the relationships between the room space and the models\\' categories. This is enabled by a new analytical structure, called Wall Grid Structure, which jointly considers the categories and locations of 3D models. Our technique greatly reduces the amount of user intervention and provides users with suggestions and inspirations. We demonstrate the applicability of our approach on three types of scenarios: conference rooms, living rooms and bedrooms.

14. Interior Design Based on Forough Farrokhzad Poetry

Directory of Open Access Journals (Sweden)

Mahsa Sanami

2018-03-01

Full Text Available The main purpose of this study is to correlate between art, literature, architect and visualization to translate the emotions and aspirations embodied in a well-known poet such as Forough Farrokhzad. Forough Farrokhzad widely regarded as a famous Iranian poet and an advocate for women’s liberation and independence. She wrote during a time when Iranian women were facing extensive discrimination and prejudice. Many of her works are rich in feminist related aspects of Iranian women. By visualization of Forough’s inner feelings, one can see a great revaluation in society towards women feelings and emotions. Like any other human, poets and artist both have thoughts and dreams rich in colors and words capsulizing their imaginary world in possible dreams which are all related to each person’s personality, culture, environment and etc. One of the ways to understand a poet is to understand the depth of his/her thoughts through his/her poems. Thus the main purpose of this research is to review interior design based on in depth analysis of related poems. Psychoanalysis of symbols, themes and colors used in poems, can be used to supplement words in extracting symptoms and energy depicting the poet inner feelings and imaginations when designing. The results of the discussing symbols and colors used by Forough in most of her poems, indicate her interest in life, death, love, society, intellectuality and philosophy. Finally the researchers through usage of visual effects and pictures used in her designs tries to assist the viewers to understand and feel the poet’s emotions and passions for life at the time of creating the poems. Thus, it can be assumed that the interior design is based on poetry rich in motion and dynamism.

15. Kajian Estetika Interior Restoran Boncafe Di Jalan Pregolan Surabaya

OpenAIRE

Fanuel W., Yemima

2014-01-01

Boncafe Pregolan restaurant is a restaurant in Surabaya located at Pregolan Street 2, Tegal sari, Central Surabaya. Boncafe Pregolan restaurant built in 2007. The interior of Boncafe Pregolan restaurant is divided into several rooms, main entrance area, main dining area I, main dining area II, smoking dining area, and terrace dining. The aesthetic of interior Boncafe Pregolan restaurant is interesting to be analyzed, because of the interior's plays inside. The design principles implemented t...

16. Vision-based overlay of a virtual object into real scene for designing room interior

Science.gov (United States)

Harasaki, Shunsuke; Saito, Hideo

2001-10-01

In this paper, we introduce a geometric registration method for augmented reality (AR) and an application system, interior simulator, in which a virtual (CG) object can be overlaid into a real world space. Interior simulator is developed as an example of an AR application of the proposed method. Using interior simulator, users can visually simulate the location of virtual furniture and articles in the living room so that they can easily design the living room interior without placing real furniture and articles, by viewing from many different locations and orientations in real-time. In our system, two base images of a real world space are captured from two different views for defining a projective coordinate of object 3D space. Then each projective view of a virtual object in the base images are registered interactively. After such coordinate determination, an image sequence of a real world space is captured by hand-held camera with tracking non-metric measured feature points for overlaying a virtual object. Virtual objects can be overlaid onto the image sequence by taking each relationship between the images. With the proposed system, 3D position tracking device, such as magnetic trackers, are not required for the overlay of virtual objects. Experimental results demonstrate that 3D virtual furniture can be overlaid into an image sequence of the scene of a living room nearly at video rate (20 frames per second).

17. Null geodesics and embedding diagrams of the interior Schwarzschild--de Sitter spacetimes with uniform density

International Nuclear Information System (INIS)

Stuchlik, Zdenek; Hledik, Stanislav; Soltes, Jiri; Ostgaard, Erlend

2001-01-01

Null geodesics and embedding diagrams of central planes in the ordinary space geometry and the optical reference geometry of the interior Schwarzschild--de Sitter spacetimes with uniform density are studied. For completeness, both positive and negative values of the cosmological constant are considered. The null geodesics are restricted to the central planes of these spacetimes, and their properties can be reflected by an 'effective potential.' If the interior spacetime is extremely compact, the effective potential has a local maximum corresponding to a stable circular null geodesic around which bound null geodesics are concentrated. The upper limit on the size of the interior spacetimes containing bound null geodesics is R=3M, independently of the value of the cosmological constant. The embedding diagrams of the central planes of the ordinary geometry into three-dimensional Euclidean space are well defined for the complete interior of all spacetimes with a repulsive cosmological constant, but the planes cannot be embedded into the Euclidean space in the case of spacetimes with subcritical values of an attractive cosmological constant. On the other hand, the embedding diagrams of the optical geometry are well defined for all of the spacetimes, and the turning points of these diagrams correspond to the radii of the circular null geodesics. All the embedding diagrams, for both the ordinary and optical geometry, are smoothly matched to the corresponding embedding diagrams of the external vacuum Schwarzschild--de Sitter spacetimes

18. A primal-dual decomposition based interior point approach to two-stage stochastic linear programming

NARCIS (Netherlands)

A.B. Berkelaar (Arjan); C.L. Dert (Cees); K.P.B. Oldenkamp; S. Zhang (Shuzhong)

1999-01-01

textabstractDecision making under uncertainty is a challenge faced by many decision makers. Stochastic programming is a major tool developed to deal with optimization with uncertainties that has found applications in, e.g. finance, such as asset-liability and bond-portfolio management.

19. Functions in the space R2(E at boundary points of the interior

Directory of Open Access Journals (Sweden)

Edwin Wolf

1983-01-01

Full Text Available Let E be a compact subset of the complex plane ℂ. We denote by R(E the algebra consisting of (the restrictions to E of rational functions with poles off E. Let m denote 2-dimensional Lebesgue measure. For p≥1, let Rp(E be the closure of R(E in Lp(E,dm.

20. Control Systems Analysis and Design via Matrix Inequalities and Interior Point Methods

National Research Council Canada - National Science Library

Boyd, Stephen P

1998-01-01

During the contract period we made considerable progress, developing new families of convex optimization problems for use in control engineering, forging new areas of control applications, and improvements in algorithms...

1. Generating human-like movements on an anthropomorphic robot using an interior point method

Science.gov (United States)

Costa e Silva, E.; Araújo, J. P.; Machado, D.; Costa, M. F.; Erlhagen, W.; Bicho, E.

2013-10-01

In previous work we have presented a model for generating human-like arm and hand movements on an anthropomorphic robot involved in human-robot collaboration tasks. This model was inspired by the Posture-Based Motion-Planning Model of human movements. Numerical results and simulations for reach-to-grasp movements with two different grip types have been presented previously. In this paper we extend our model in order to address the generation of more complex movement sequences which are challenged by scenarios cluttered with obstacles. The numerical results were obtained using the IPOPT solver, which was integrated in our MATLAB simulator of an anthropomorphic robot.

2. Warmstarting the homogeneous and self-dual interior point method for linear and conic quadratic problems

DEFF Research Database (Denmark)

Skajaa, Anders; Andersen, Erling D.; Ye, Yinyu

2013-01-01

and their negligible computational cost. This is a major advantage when compared to previously suggested strategies that require a pool of iterates from the solution process of the initial problem. Consequently our strategies are better suited for users who use optimization algorithms as black-box routines which...... worst-case complexity. We present extensive computational results showing work reductions when warmstarting compared to coldstarting in the range 30–75% depending on the problem class and magnitude of the problem perturbation. The computational experiments thus substantiate that the warmstarting...

3. Deep Interior Mission: Imaging the Interior of Near-Earth Asteroids Using Radio Reflection Tomography

Science.gov (United States)

Safaeinili, A.; Asphaug, E.; Belton, M.; Klaasen, K.; Ostro, S.; Plaut, J.; Yeomans, D.

2004-12-01

Near-Earth asteroids are important exploration targets since they provide clues to the evolution of the solar system. They are also of interest since they present a clear danger to Earth in the future. Our mission objective is to image the internal structure of two NEOs using radio reflection tomography (RRT), in order to explore the record of asteroid origin and impact evolution, and to test the fundamental hypothesis that these important members of the solar system are rubble piles rather than consolidated bodies. Our mission's RRT technique is analogous to doing a CAT scan" of the asteroid from orbit. Closely sampled radar echoes are processed to yield volumetric maps of mechanical and compositional boundaries, and measure interior material dielectric properties. The RRT instrument is a radar that operates at 5 and 15 MHz with two 30-m (tip-to-tip) dipole antennas that are used in a cross-dipole configuration. The radar transmitter and receiver electronics have heritage from JPL's MARSIS contribution to Mars Express, and the antenna is similar to systems used in IMAGE and LACE missions. The 5-MHz channel is designed to penetrate >1 km of basaltic rock, and 15-MHz penetrates a few hundred meters or more. In addition to RRT volumetric imaging, we use a redundant color cameras to explore the surface expressions of unit boundaries, in order to relate interior radar imaging to what is observable from spacecraft imaging and from Earth. The camera also yields stereo color imaging for geology and RRT-related compositional analysis. Gravity and high fidelity geodesy are used to explore how interior structure is expressed in shape, density, mass distribution and spin. Deep interior has two targets (S-type 1999 ND43 and V-type Nyx ) whose composition bracket the diversity of solar system materials that we are likely to encounter, and are richly complementary.

4. Tidal constraints on the interior of Venus

Science.gov (United States)

Dumoulin, C.; Tobie, G.; Verhoeven, O.; Rosenblatt, P.; Rambaux, N.

2017-12-01

As a prospective study for a future exploration of Venus, we compute the tidal response of Venus' interior assuming various mantle compositions and temperature profiles representative of different scenarios of Venus' formation and evolution. The mantle density and seismic velocities are modeled from thermodynamical equilibria of mantle minerals and used to predict the moment of inertia, Love numbers, and tide-induced phase lag characterizing the signature of the internal structure in the gravity field. The viscoelasticity of the mantle is parameterized using an Andrade rheology. From the models considered here, the moment of inertia lies in the range of 0.327 to 0.342, corresponding to a core radius of 2900 to 3450 km. Viscoelasticity of the mantle strongly increases the potential Love number relative to previously published elastic models. Due to the anelasticity effects, we show that the possibility of a completely solid metal core inside Venus cannot be ruled out based on the available estimate of k2 from the Magellan mission (Konopliv and Yoder, 1996). A Love number k2 lower than 0.27 would indicate the presence of a fully solid iron core, while for larger values, solutions with an entirely or partially liquid core are possible. Precise determination of the Love numbers, k2 and h2, together with an estimate of the tidal phase lag, are required to determine the state and size of the core, as well as the composition and viscosity of the mantle.

5. Borehole locations on seven interior salt domes

International Nuclear Information System (INIS)

Simcox, A.C.; Wampler, S.L.

1982-08-01

This report is designed as an inventory of all wells known to have been drilled within a five-mile radius of each of seven salt domes within the Interior Salt Basin in east Texas, northern Louisiana and Mississippi. There are 72 boreholes that entered salt above an elevation of -3000 feet mean sea level. For these, details of location, drilling dates, depth of casing and cement, elevation of top of caprock and salt, etc., are given on tables in the appendix. Of the seven domes, Oakwood has the largest number of boreholes, thirty-eight (including two sidetracked wells) that enter the salt stock above -3000 feet mean sea level; another dome in northeast Texas, Keechi, has eight; in northern Louisiana, Rayburn's has four and Vacherie has five; in southern Mississippi, Cypress Creek has seven, Lampton has one, and Richton has nine. In addition, all wells known outside the supra-domal area, but within a five-mile radius of the center of the 7 domes are separately catalogued

6. 10. The surface and interior of venus

Science.gov (United States)

Masursky, H.; Kaula, W.M.; McGill, G.E.; Pettengill, G.H.; Phillips, R.J.; Russell, C.T.; Schubert, G.; Shapiro, I.I.

1977-01-01

7. Magnetic field generations in planetary interiors

International Nuclear Information System (INIS)

Singh, R.N.

1981-01-01

One of the most fundamental properties of some better known planets is their internally generated magnetic field. A successful explanation of such magnetic fields in 'large hot planetary interiors' remains elusive. Starting from Sir Joseph Larmor's discussions of 'How could a rotating body such as Sun become a magnet' (1979) to present day general consensus that 'the existence of the geomagnetic field is a manifestation of a finite amplitude instability of the Earth's core', significant theoretical developments have taken place in this field. The essential ingredients of the successful theories are the presence of a rotating fluid core of large size having sufficiently high electrical conductivity and energy source to drive the convection. These theories use equations of Newton and Maxwell to generate the requisite kind of the magnetic and velocity fields in response to the preferred distribution of the energy sources. Studies before early seventies, were devoted, mainly, to resolve the kinematics of the problem, and have convincingly demonstrated the plausibility of regeneration action of the organised motion. However, the main problem of the dynamo-processes is yet in the early stages of development despite important contributions made by Soward and Busse. A review of some of these developments is presented. (author)

8. Magnetism and the interior of the moon

Science.gov (United States)

Dyal, P.; Parkin, C. W.; Daily, W. D.

1974-01-01

During the time period 1961-1972, 11 magnetometers were sent to the moon. The primary purpose of this paper is to review the results of lunar magnetometer data analysis, with emphasis on the lunar interior. Magnetic fields have been measured on the lunar surface at the Apollo 12, 14, 15, and 16 landing sites. The remanent field values at these sites are 38, 103 (maximum), 3, and 327 gammas (maximum), respectively. Simultaneous magnetic field and solar plasma pressure measurements show that the Apollo 12 and 16 remanent fields are compressed during times of high plasma dynamic pressure. Apollo 15 and 16 subsatellite magnetometers have mapped in detail the field above portions of the lunar surface and have placed an upper limit on the global permanent dipole moment. Satellite and surface measurements show strong evidence that the lunar crust is magnetized over much of the lunar globe. Magnetic fields are stronger in highland regions than in mare regions and stronger on the lunar far side than on the near side. The largest magnetic anomaly measured to date is between the craters Van de Graaff and Aitken on the lunar far side.

9. Field Dependence and Vocational Choice of Interior Design Students.

Science.gov (United States)

Davis, Diane M.; And Others

One hundred ninety-three interior design college students were administered the Group Embedded Figures Test, a measure of field dependence, in order to evaluate two of Witkin's hypotheses regarding career choice. The career-differentiation hypothesis predicted that students electing to major in interior design would be field independent because…

10. Virtual Interior Design Based On VRML AND JAVA

Science.gov (United States)

Qi, Shaoliang

Virtual reality has been involved in a wide range of academic and commercial applications. It can give users a natural feeling of the environment by creating realistic virtual worlds. In this paper, we use vrml and java to discuss the virtual interior design. EAI and JASI are used to realize the interaction between user and virtual interior scene.

11. Mood perception of interior colors in a gym

Science.gov (United States)

Ohno, Haruyo; Koizumi, Naoko

2002-06-01

When people enter a gym, they feel more like exercising in some cases than other cases. The interior color of the space may be a contributing factor. This paper discusses how the interior color of a gym affects female subjects in their twenties and forties to fifties both physiologically and psychologically.

12. The Interior Columbia Basin Ecosystem Management Project: scientific assessment.

Science.gov (United States)

1999-01-01

This CD-ROM contains digital versions (PDF) of the major scientific documents prepared for the Interior Columbia Basin Ecosystem Management Project (ICBEMP). "A Framework for Ecosystem Management in the Interior Columbia Basin and Portions of the Klamath and Great Basins" describes a general planning model for ecosystem management. The "Highlighted...

13. Design for subjective well-being in interior architecture

NARCIS (Netherlands)

Petermans, A.; Pohlmeyer, A.E.

2014-01-01

Can interior environments engage people in pleasurable and meaningful experiences and thereby have a positive influence on their happiness? This paper discusses why and how interior architects might want to consider implementing ideas in relation to ‘design for subjective well-being’. Despite of

14. Interior Design Standards in the Secondary FCS Curriculum

Science.gov (United States)

Katz, Shana H.; Smith, Bettye P.

2006-01-01

This article deals with a study on interior design standards in the secondary FCS curriculum. This study assessed the importance FCS teachers placed on content standards in the interior design curriculum to help determine the amount of time and emphasis to place on the units within the courses. A cover letter and questionnaire were sent…

15. Interior spatial layout with soft objectives using evolutionary computation

NARCIS (Netherlands)

Chatzikonstantinou, I.; Bengisu, E.

2016-01-01

This paper presents the design problem of furniture arrangement in a residential interior living space, and addresses it by means of evolutionary computation. Interior arrangement is an important and interesting problem that occurs commonly when designing living spaces. It entails determining the

16. Interior Design Supports Art Education: A Case Study

Science.gov (United States)

Clemons, Stephanie A.

2006-01-01

Interior design, as a field of study, is a rapidly growing area of interest--particularly for teenagers in the United States. Part of this interest stems from the proliferation of design-related reality shows available through television media. Some art educators and curriculum specialists in the nation perceive the study of interior spaces as a…

17. Interior Design Education within a Human Ecological Framework

Science.gov (United States)

Kaup, Migette L.; Anderson, Barbara G.; Honey, Peggy

2007-01-01

An education based in human ecology can greatly benefit interior designers as they work to understand and improve the human condition. Design programs housed in colleges focusing on human ecology can improve the interior design profession by taking advantage of their home base and emphasizing the human ecological framework in the design curricula.…

Science.gov (United States)

A problem common to many wastewater treatment and storage lagoons is erosion of the interior slopes. Erosion may be caused by surface runoff and wind-induced wave action. The soils that compose the steep interior slopes of lagoons are especially susceptible to erosion and slumpin...

19. Knotworking In An Interior Décor Process

DEFF Research Database (Denmark)

Rasmussen, Mai; Jensen, Rasmus Lund; Fisker, Anna Marie

2016-01-01

These days, new buildings are being built at Aalborg University in Denmark, why interior décor processes are initiated. Planning the interior décor of Aalborg University is centralized at the Shared Service Center, where internal architects furnish the spaces and buy the selected furniture withou...

20. Resilience of Athabascan subsistence systems to interior Alaska's changing climate

Science.gov (United States)

Gary P. Kofinas; F. Stuart Chapin; Shauna BurnSilver; Jennifer I. Schmidt; Nancy L. Fresco; Knut Kielland; Stephanie Martin; Anna Springsteen; T. Scott Rupp

2010-01-01

Subsistence harvesting and wild food production by Athabascan peoples is part of an integrated social-ecological system of interior Alaska. We describe effects of recent trends and future climate change projections on the boreal ecosystem of interior Alaska and relate changes in ecosystem services to Athabascan subsistence. We focus primarily on moose, a keystone...

1. The Neutron Star Interior Composition Explorer (NICER): Design and Development

Science.gov (United States)

Gendreau, Keith C.; Arzoumanian, Zaven; Adkins, Phillip W.; Albert, Cheryl L.; Anders, John F.; Aylward, Andrew T.; Baker, Charles L.; Balsamo, Erin R.; Bamford, William A.; Benegalrao, Suyog S.;

2016-01-01

During 2014 and 2015, NASA's Neutron star Interior Composition Explorer (NICER) mission proceeded successfully through Phase C, Design and Development. An X-ray (0.2{12 keV) astrophysics payload destined for the International Space Station, NICER is manifested for launch in early 2017 on the Commercial Resupply Services SpaceX-11 flight. Its scientific objectives are to investigate the internal structure, dynamics, and energetics of neutron stars, the densest objects in the universe. During Phase C, flight components including optics, detectors, the optical bench, pointing actuators, electronics, and others were subjected to environmental testing and integrated to form the flight payload. A custom-built facility was used to co-align and integrate the X-ray \\concentrator" optics and silicon-drift detectors. Ground calibration provided robust performance measures of the optical (at NASA's Goddard Space Flight Center) and detector (at the Massachusetts Institute of Technology) subsystems, while comprehensive functional tests prior to payload-level environmental testing met all instrument performance requirements. We describe here the implementation of NICER's major subsystems, summarize their performance and calibration, and outline the component-level testing that was successfully applied.

2. CERN Document Server

Kletschkowski, Thomas

2012-01-01

This book presents a mechatronic approach to Active Noise Control (ANC). It describes the required elements of system theory, engineering acoustics, electroacoustics and adaptive signal processing in a comprehensive, consistent and systematic manner using a unified notation. Furthermore, it includes a design methodology for ANC-systems, explains its application and describes tools to be used for ANC-system design. From the research point of view, the book presents new approaches to sound source localization in weakly damped interiors. One is based on the inverse finite element method, the other is based on a sound intensity probe with an active free field. Furthermore, a prototype of an ANC-system able to reach the physical limits of local (feed-forward) ANC is described. This is one example for applied research in ANC-system design. Other examples are given for (i) local ANC in a semi-enclosed subspace of an aircraft cargo hold and (ii) for the combination of audio entertainment with ANC.

3. Zero-point energy of confined fermions

International Nuclear Information System (INIS)

Milton, K.A.

1980-01-01

A closed form for the reduced Green's function of massless fermions in the interior of a spherical bag is obtained. In terms of this Green's function, the corresponding zero-point or Casimir energy is computed. It is proposed that a resulting quadratic divergence can be absorbed by renormalizing a suitable parameter in the bag model (that is, absorbed by a contact term). The residual Casimir stress is attractive, but smaller than the repulsive Casimir stress of gluons in the model. The result for the total zero-point energy is in substantial disagreement with bag model phenomenological values

4. 3D high-resolution radar imaging of small body interiors

Science.gov (United States)

Sava, Paul; Asphaug, Erik

2017-10-01

Answering fundamental questions about the origin and evolution of small planetary bodies hinges on our ability to image their interior structure in detail and at high resolution (Asphaug, 2009). We often infer internal structure from surface observations, e.g. that comet 67P/Churyumov-Gerasimenko is a primordial agglomeration of cometesimals (Massironi et al., 2015). However, the interior structure is not easily accessible without systematic imaging using, e.g., radar transmission and reflection data, as suggested by the CONSERT experiment on Rosetta. Interior imaging depends on observations from multiple viewpoints, as in medical tomography.We discuss radar imaging using methodology adapted from terrestrial exploration seismology (Sava et al., 2015). We primarily focus on full wavefield methods that facilitate high quality imaging of small body interiors characterized by complex structure and large contrasts of physical properties. We consider the case of a monostatic system (co-located transmitters and receivers) operated at two frequency bands, centered around 5 and 15 MHz, from a spacecraft in slow polar orbit around a spinning comet nucleus. Assuming that the spin period is significantly (e.g. 5x) faster than the orbital period, this configuration allows repeated views from multiple directions (Safaeinili et al., 2002)Using realistic numerical experiments, we argue that (1) the comet/asteroid imaging problem is intrinsically 3D and conventional SAR methodology does not satisfy imaging, sampling and resolution requirements; (2) imaging at different frequency bands can provide information about internal surfaces (through migration) and internal volumes (through tomography); (3) interior imaging can be accomplished progressively as data are being acquired through successive orbits around the studied object; (4) imaging resolution can go beyond the apparent radar frequency band by deconvolution of the point-spread-function characterizing the imaging system; and (5

5. Dream Home: a multiview stereoscopic interior design system

Science.gov (United States)

Hsiao, Fu-Jen; Teng, Chih-Jen; Lin, Chung-Wei; Luo, An-Chun; Yang, Jinn-Cherng

2010-01-01

In this paper, a novel multi-view stereoscopic interior design system, "Dream Home", has been developed to bring users new interior design experience. Different than other interior design system before, we put emphasis on its intuitive manipulation and multi-view stereoscopic visualization in real time. Users can do their own interior design just using their hands and eyes without any difficulty. They manipulate furniture cards directly as they wish to setup their living room in the model house task space, get the multi-view 3D visual feedback instantly, and re-adjust cards until they are satisfied. No special skills are required, and you can explore your design talent arbitrarily. We hope that "Dream Home" will make interior design more user-friendly, more intuitive, and more vivid.

6. A Voronoi interior adjacency-based approach for generating a contour tree

Science.gov (United States)

Chen, Jun; Qiao, Chaofei; Zhao, Renliang

2004-05-01

A contour tree is a good graphical tool for representing the spatial relations of contour lines and has found many applications in map generalization, map annotation, terrain analysis, etc. A new approach for generating contour trees by introducing a Voronoi-based interior adjacency set concept is proposed in this paper. The immediate interior adjacency set is employed to identify all of the children contours of each contour without contour elevations. It has advantages over existing methods such as the point-in-polygon method and the region growing-based method. This new approach can be used for spatial data mining and knowledge discovering, such as the automatic extraction of terrain features and construction of multi-resolution digital elevation model.

7. On implementation of the extended interior penalty function. [optimum structural design

Science.gov (United States)

Cassis, J. H.; Schmit, L. A., Jr.

1976-01-01

The extended interior penalty function formulation is implemented. A rational method for determining the transition between the interior and extended parts is set forth. The formulation includes a straightforward method for avoiding design points with some negative components, which are physically meaningless in structural analysis. The technique, when extended to problems involving parametric constraints, can facilitate closed form integration of the penalty terms over the most important parts of the parameter interval. The method lends itself well to the use of approximation concepts, such as design variable linking, constraint deletion and Taylor series expansions of response quantities in terms of design variables. Examples demonstrating the algorithm, in the context of planar orthogonal frames subjected to ground motion, are included.

8. Statistical interior properties of globular proteins

International Nuclear Information System (INIS)

Zhou-Ting, Jiang; Tai-Quan, Wu; Lin-Xi, Zhang; Ting-Ting, Sun

2009-01-01

The character of forming long-range contacts affects the three-dimensional structure of globular proteins deeply. As the different ability to form long-range contacts between 20 types of amino acids and 4 categories of globular proteins, the statistical properties are thoroughly discussed in this paper. Two parameters N C and N D are defined to confine the valid residues in detail. The relationship between hydrophobicity scales and valid residue percentage of each amino acid is given in the present work and the linear functions are shown in our statistical results. It is concluded that the hydrophobicity scale defined by chemical derivatives of the amino acids and nonpolar phase of large unilamellar vesicle membranes is the most effective technique to characterise the hydrophobic behavior of amino acid residues. Meanwhile, residue percentage P i and sequential residue length L i of a certain protein i are calculated under different conditions. The statistical results show that the average value of P i as well as L i of all-α proteins has a minimum among these 4 classes of globular proteins, indicating that all-α proteins are hardly capable of forming long-range contacts one by one along their linear amino acid sequences. All-β proteins have a higher tendency to construct long-range contacts along their primary sequences related to the secondary configurations, i.e. parallel and anti-parallel configurations of β sheets. The investigation of the interior properties of globular proteins give us the connection between the three-dimensional structure and its primary sequence data or secondary configurations, and help us to understand the structure of protein and its folding process well. (cross-disciplinary physics and related areas of science and technology)

9. A boundary integral equation method using auxiliary interior surface approach for acoustic radiation and scattering in two dimensions.

Science.gov (United States)

Yang, S A

2002-10-01

This paper presents an effective solution method for predicting acoustic radiation and scattering fields in two dimensions. The difficulty of the fictitious characteristic frequency is overcome by incorporating an auxiliary interior surface that satisfies certain boundary condition into the body surface. This process gives rise to a set of uniquely solvable boundary integral equations. Distributing monopoles with unknown strengths over the body and interior surfaces yields the simple source formulation. The modified boundary integral equations are further transformed to ordinary ones that contain nonsingular kernels only. This implementation allows direct application of standard quadrature formulas over the entire integration domain; that is, the collocation points are exactly the positions at which the integration points are located. Selecting the interior surface is an easy task. Moreover, only a few corresponding interior nodal points are sufficient for the computation. Numerical calculations consist of the acoustic radiation and scattering by acoustically hard elliptic and rectangular cylinders. Comparisons with analytical solutions are made. Numerical results demonstrate the efficiency and accuracy of the current solution method.

10. Virtual Reality as Innovative Approach to the Interior Designing

Science.gov (United States)

Kaleja, Pavol; Kozlovská, Mária

2017-06-01

We can observe significant potential of information and communication technologies (ICT) in interior designing field, by development of software and hardware virtual reality tools. Using ICT tools offer realistic perception of proposal in its initial idea (the study). A group of real-time visualization, supported by hardware tools like Oculus Rift HTC Vive, provides free walkthrough and movement in virtual interior with the possibility of virtual designing. By improving of ICT software tools for designing in virtual reality we can achieve still more realistic virtual environment. The contribution presented proposal of an innovative approach of interior designing in virtual reality, using the latest software and hardware ICT virtual reality technologies

11. Mercury's Interior from MESSENGER Radio Science Data

Science.gov (United States)

Genova, A.; Mazarico, E.; Goossens, S. J.; Lemoine, F. G.; Neumann, G. A.; Smith, D. E.; Zuber, M. T.

2017-12-01

The MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft provided precise radio tracking data in orbit about Mercury for more than 4 years, from March 2011 to April 2015. These geodetic measurements enable us to investigate the interior structure of the planet from the inner core to the crust. The first three years of radio data allowed us to determine the gravity field of Mercury with a resolution of 150 km in the northern hemisphere (degree and order 50 in spherical harmonics) since the periapsis was located at higher latitudes (>65˚N) and 200-500 km altitudes. The comparison of this gravity solution with Mercury's topography, which was retrieved by using over 25 million individual measurements of the Mercury Laser Altimeter (MLA), resulted in a preliminary map of the crustal thickness of the planet. However, those results were limited by the resolution of the gravity field since the topography was defined in spherical harmonics up to degree and order 125. The last year of the MESSENGER extended mission was dedicated to a low-altitude campaign, where the spacecraft periapsis was maintained at altitudes between 25 and 100 km. The radio data collected during this mission phase allowed us to significantly improve the resolution of the gravity field locally in the northern hemisphere up to degree and order 100 in spherical harmonics. We present the gravity anomalies and crustal thickness maps that lead to a better understanding on the formation and evolution of specific regions. We present our estimated orientation model, which slightly differs from the solutions that were obtained by using Earth-based radar measurements and the co-registration of MESSENGER imaging and altimetry data. These previous estimates provide a direct measurement of the surface response, whereas the orientation model from gravity is more sensitive to the inner and outer core. A discrepancy between core and surface obliquities may provide fundamental

12. CHIC - Coupling Habitability, Interior and Crust

Science.gov (United States)

Noack, Lena; Labbe, Francois; Boiveau, Thomas; Rivoldini, Attilio; Van Hoolst, Tim

2014-05-01

We present a new code developed for simulating convection in terrestrial planets and icy moons. The code CHIC is written in Fortran and employs the finite volume method and finite difference method for solving energy, mass and momentum equations in either silicate or icy mantles. The code uses either Cartesian (2D and 3D box) or spherical coordinates (2D cylinder or annulus). It furthermore contains a 1D parametrised model to obtain temperature profiles in specific regions, for example in the iron core or in the silicate mantle (solving only the energy equation). The 2D/3D convection model uses the same input parameters as the 1D model, which allows for comparison of the different models and adaptation of the 1D model, if needed. The code has already been benchmarked for the following aspects: - viscosity-dependent rheology (Blankenbach et al., 1989) - pseudo-plastic deformation (Tosi et al., in preparation phase) - subduction mechanism and plastic deformation (Quinquis et al., in preparation phase) New features that are currently developed and benchmarked include: - compressibility (following King et al., 2009 and Leng and Zhong, 2008) - different melt modules (Plesa et al., in preparation phase) - freezing of an inner core (comparison with GAIA code, Huettig and Stemmer, 2008) - build-up of oceanic and continental crust (Noack et al., in preparation phase) The code represents a useful tool to couple the interior with the surface of a planet (e.g. via build-up and erosion of crust) and it's atmosphere (via outgassing on the one hand and subduction of hydrated crust and carbonates back into the mantle). It will be applied to investigate several factors that might influence the habitability of a terrestrial planet, and will also be used to simulate icy bodies with high-pressure ice phases. References: Blankenbach et al. (1989). A benchmark comparison for mantle convection codes. GJI 98, 23-38. Huettig and Stemmer (2008). Finite volume discretization for dynamic

13. The vibro-acoustic response and analysis of a full-scale aircraft fuselage section for interior noise reduction.

Science.gov (United States)

Herdic, Peter C; Houston, Brian H; Marcus, Martin H; Williams, Earl G; Baz, Amr M

2005-06-01

The surface and interior response of a Cessna Citation fuselage section under three different forcing functions (10-1000 Hz) is evaluated through spatially dense scanning measurements. Spatial Fourier analysis reveals that a point force applied to the stiffener grid provides a rich wavenumber response over a broad frequency range. The surface motion data show global structural modes (approximately 450 Hz). Some evidence of Bloch wave motion is observed, revealing classical stop/pass bands associated with stiffener periodicity. The interior response (approximately interior cavity. Local intrapanel responses (approximately > 150 Hz) of the fuselage provide a broadband volume velocity source that strongly excites a high density of interior modes. Mode coupling between the structural response and the interior modes appears to be negligible due to a lack of frequency proximity and mismatches in the spatial distribution. A high degree-of-freedom finite element model of the fuselage section was developed as a predictive tool. The calculated response is in good agreement with the experimental result, yielding a general model development methodology for accurate prediction of structures with moderate to high complexity.

14. Design team simplifies interior to aid patient recuperation.

Science.gov (United States)

Fishback, B W; Krewson, C

1981-02-16

Vanderbilt University Medical Center's architect and interior designer coordinated efforts to minimize medical components by painting them a neutral color and sought a unified approach throughout the building to make it more personal without a substantial cost increase.

15. 3D radar wavefield tomography of comet interiors

Science.gov (United States)

Sava, Paul; Asphaug, Erik

2018-04-01

Answering fundamental questions about the origin and evolution of small planetary bodies hinges on our ability to image their surface and interior structure in detail and at high resolution. The interior structure is not easily accessible without systematic imaging using, e.g., radar transmission and reflection data from multiple viewpoints, as in medical tomography. Radar tomography can be performed using methodology adapted from terrestrial exploration seismology. Our feasibility study primarily focuses on full wavefield methods that facilitate high quality imaging of small body interiors. We consider the case of a monostatic system (co-located transmitters and receivers) operated in various frequency bands between 5 and 15 MHz, from a spacecraft in slow polar orbit around a spinning comet nucleus. Using realistic numerical experiments, we demonstrate that wavefield techniques can generate high resolution tomograms of comets nuclei with arbitrary shape and complex interior properties.

16. Connecting horizon pixels and interior voxels of a black hole

International Nuclear Information System (INIS)

Nicolini, Piero; Singleton, Douglas

2014-01-01

In this paper we discuss to what extent one can infer details of the interior structure of a black hole based on its horizon. Recalling that black hole thermal properties are connected to the non-classical nature of gravity, we circumvent the restrictions of the no-hair theorem by postulating that the black hole interior is singularity free due to violations of the usual energy conditions. Further these conditions allow one to establish a one-to-one, holographic projection between Planckian areal “bits” on the horizon and “voxels”, representing the gravitational degrees of freedom in the black hole interior. We illustrate the repercussions of this idea by discussing an example of the black hole interior consisting of a de Sitter core postulated to arise from the local graviton quantum vacuum energy. It is shown that the black hole entropy can emerge as the statistical entropy of a gas of voxels

17. Interior, Environment, and Related Agencies: FY2007 Appropriations

National Research Council Canada - National Science Library

Vincent, Carol H; Bearden, David M; Corn, M. L; Gorte, Ross W; Humphries, Marc; Sheikh, Pervaze A; Whiteman, David L; Boren, Susan; Walke, Roger; Bea, Keith

2007-01-01

... of Health and Human Services. It also includes funding for arts and cultural agencies; the Environmental Protection Agency, which was recently transferred to the appropriations subcommittees that deal with Interior and Related Agencies...

18. Dynamical measurements of the interior structure of exoplanets

International Nuclear Information System (INIS)

Becker, Juliette C.; Batygin, Konstantin

2013-01-01

Giant gaseous planets often reside on orbits in sufficient proximity to their host stars for the planetary quadrupole gravitational field to become non-negligible. In presence of an additional planetary companion, a precise characterization of the system's orbital state can yield meaningful constraints on the transiting planet's interior structure. However, such methods can require a very specific type of system. This paper explores the dynamic range of applicability of these methods and shows that interior structure calculations are possible for a wide array of orbital architectures. The HAT-P-13 system is used as a case study, and the implications of perturbations arising from a third distant companion on the feasibility of an interior calculation are discussed. We find that the method discussed here is likely to be useful in studying other planetary systems, allowing the possibility of an expanded survey of the interiors of exoplanets.

19. Vibrant Interior Reflects Lifestyle. 1974 Award Winning Architecture

Science.gov (United States)

American School and University, 1974

1974-01-01

The design of the student center at Essex Community College in Baltimore County, Maryland, reflects youthful lifestyles in the interior decor while providing exterior design to harmonize with existing campus buildings. (Author/MF)

20. Early User Appraisal of the MDARS Interior Robot

National Research Council Canada - National Science Library

Laird, R

1999-01-01

The Mobile Detection Assessment Response System (MDARS) is a joint Army-Navy effort to field interior and exterior autonomous platforms for security and inventory assessment functions at DoD warehouses and storage sites...

1. Entropy corresponding to the interior of a Schwarzschild black hole

Directory of Open Access Journals (Sweden)

Bibhas Ranjan Majhi

2017-07-01

Full Text Available Interior volume within the horizon of a black hole is a non-trivial concept which turns out to be very important to explain several issues in the context of quantum nature of black hole. Here we show that the entropy, contained by the maximum interior volume for massless modes, is proportional to the Bekenstein–Hawking expression. The proportionality constant is less than unity implying the horizon bears maximum entropy than that by the interior. The derivation is very systematic and free of any ambiguity. To do so the precise value of the energy of the modes, living in the interior, is derived by constraint analysis. Finally, the implications of the result are discussed.

2. Entropy corresponding to the interior of a Schwarzschild black hole

Science.gov (United States)

Majhi, Bibhas Ranjan; Samanta, Saurav

2017-07-01

Interior volume within the horizon of a black hole is a non-trivial concept which turns out to be very important to explain several issues in the context of quantum nature of black hole. Here we show that the entropy, contained by the maximum interior volume for massless modes, is proportional to the Bekenstein-Hawking expression. The proportionality constant is less than unity implying the horizon bears maximum entropy than that by the interior. The derivation is very systematic and free of any ambiguity. To do so the precise value of the energy of the modes, living in the interior, is derived by constraint analysis. Finally, the implications of the result are discussed.

3. Support-free interior carving for 3D printing

Directory of Open Access Journals (Sweden)

Yue Xie

2017-03-01

Full Text Available Recent interior carving methods for functional design necessitate a cumbersome cut-and-glue process in fabrication. We propose a method to generate interior voids which not only satisfy the functional purposes but are also support-free during the 3D printing process. We introduce a support-free unit structure for voxelization and derive the wall thicknesses parametrization for continuous optimization. We also design a discrete dithering algorithm to ensure the printability of ghost voxels. The interior voids are iteratively carved by alternating the optimization and dithering. We apply our method to optimize the static and rotational stability, and print various results to evaluate the efficacy. Keywords: Interior carving, Support-free, Voxels dithering, Shape optimization, 3D printing

4. Effect of area on color harmony in interior spaces

OpenAIRE

Odabaşıoğlu, Seden

2015-01-01

Cataloged from PDF version of article. Thesis (Ph.D.): Bilkent University, Department of Interior Architecture and Environmental Design, İhsan Doğramacı Bilkent University, 2015. Includes bibliographical references (leaves 142-152). The main aim of this study is to examine the effect of area on color harmony in interior spaces. Area in color harmony is the relative amount of different color areas represented as a proportion on which color harmony depends. Colors in the color ...

5. Interior design as a motivation for creating creative spaces

OpenAIRE

Weiner, Nina

2013-01-01

The thesis underlines the importance of a thoughtful, systematic and modern way of designing classrooms due to its effects on productivity and creativity of pupils. The theoretical part focuses on the relationship between creativity and art classroom; a particular attention is given to the elements of interior design of art classrooms, enabling such organisation of space that fosters creativity in pupils. The emphasis is given on colour and lights as essential elements of interior design. In ...

6. Perancangan Interior Redesain Restoran Bambuden 2 Di Makassar

OpenAIRE

Limewa, Jaquliene Feby

2017-01-01

Chinese restaurant is one of the most popular places in the community. Rebranding interior design Bambuden 2 restaurant in Makassar is an interior design of a restaurant that presents dominant chinese food, by offering a blend of Oriental character & Elegant Nuance by adding Bar within the restaurant in different scope area. The restaurant is designed is one restaurant that is designed for the middle to top, with a system of waiter service or waitress to tables. The planned facilities inc...

7. Trends in CAD education in interior design programs

OpenAIRE

Ko, Hye Mi

1990-01-01

This research investigated Computer Aided Design (CAD) education in the interior design. program focusing on educators' opinions about creativity aspects including computer application, teaching materials and teaching methods as well as other trends in CAD education. A questionnaire was sent to one hundred eighty-two members of the Interior Design Educators Council (IDEC). A frequency distribution was used on 69 usable returned surveys to describe the sample characteristi...

8. Architecture, landscape architecture and interior- Hons B 2009

CSIR Research Space (South Africa)

Osman, A

2010-03-01

Full Text Available will be as follows: 1. History of Urban Form 2. Urban Renewal and Reactions 3. Urban Order, Security and Power 4. Colonial Impact on Urban From 5. Memory and Conservation 6. Considering the Public and Private Realm 7. Housing and Urban Form ? Type, Poetics 8....e. ?interior design? / ?inte- rior architecture?). Interior design is the reaction to ?found? space and follows three modes of produc- tion: installation, insertion and intervention. Archi- tectural theory pertinent to the discipline?s ontology...

9. Perancangan Interior Pusat Pendidikan Fashion Di Kota Samarinda

OpenAIRE

William, Livia Gabrielle

2016-01-01

Interior Education Center Fashion in Samarinda City aims to find education center of fashion that can complete student's facilities, finding educational center of fashion that produces interior design educational, informative, and presentative, find educational center of fashion which can show elements of Indonesian culture, discover fashion education center that can attract people in Samarinda. The expected benefits of this research is for the public forum for people who have become fashion ...

10. Interior Gradient Estimates for Nonuniformly Parabolic Equations II

Directory of Open Access Journals (Sweden)

Lieberman Gary M

2007-01-01

Full Text Available We prove interior gradient estimates for a large class of parabolic equations in divergence form. Using some simple ideas, we prove these estimates for several types of equations that are not amenable to previous methods. In particular, we have no restrictions on the maximum eigenvalue of the coefficient matrix and we obtain interior gradient estimates for so-called false mean curvature equation.

Science.gov (United States)

Huhman, H.; Dewitz, J.; Cristobal, J.; Prakash, A.

2017-12-01

The Arctic has become a generally warmer place over the past decades leading to earlier snowmelt, permafrost degradation and changing plant communities. One area in particular, vegetation change, is responding relatively rapidly to climate change, impacting the surrounding environment with changes to forest fire regime, forest type, forest resiliency, habitat availability for subsistence flora and fauna, hydrology, among others. To quantify changes in vegetation in the interior Alaska boreal forest over the last four decades, this study uses the National Land Cover Database (NLCD) decision-tree based classification methods, using both C5 and ERDAS Imagine software, to classify Landsat Surface Reflectance Images into the following NLCD-consistent vegetation classes: planted, herbaceous, shrubland, and forest (deciduous, evergreen and mixed). The results of this process are a total of four vegetation cover maps, that are freely accessible to the public, one for each decade in the 1980's, 1990's, 2000's, and a current map for 2017. These maps focus on Fairbanks, Alaska and the surrounding area covering approximately 36,140 square miles. The maps are validated with over 4,000 ground truth points collected through organizations such as the Landfire Project and the Long Term Ecological Research Network, as well as vegetation and soil spectra collected from the study area concurrent with the Landsat satellite over-passes with a Spectral Evolution PSR+ 3500 spectro-radiometer (0.35 - 2.5 μm). We anticipate these maps to be viewed by a wide user-community and may aid in preparing the residents of Alaska for changes in their subsistence food sources and will contribute to the scientific community in understanding the variety of changes that can occur in response to changing vegetation.

12. Interior's Climate Science Centers: Focus or Fail

Science.gov (United States)

Udall, B.

2012-12-01

After a whirlwind two years of impressive and critical infrastructure building, the Department of Interior's Climate Science Centers are now in a position to either succeed or fail. The CSCs have a number of difficult structural problems including too many constituencies relative to the available resources, an uneasy relationship among many of the constituencies including the DOI agencies themselves, a need to do science in a new, difficult and non-traditional way, and a short timeframe to produce useful products. The CSCs have built a broad and impressive network of scientists and stakeholders. These entities include science providers of the universities and the USGS, and decision makers from the states, tribes, DOI land managers and other federal agencies and NGOs. Rather than try to support all of these constituencies the CSCs would be better served by refocusing on a core mission of supporting DOI climate related decision making. The CSCs were designed to service the climate science needs of DOI agencies, many of which lost their scientific capabilities in the 1990s due to a well-intentioned but ultimately harmful re-organization at DOI involving the now defunct National Biological Survey. Many of these agencies would like to have their own scientists, have an uneasy relationship with the nominal DOI science provider, the USGS, and don't communicate effectively among themselves. The CSCs must not succumb to pursuing science in either the traditional mode of the USGS or in the traditional mode of the universities, or worse, both of them. These scientific partners will need to be flexible, learn how to collaborate and should expect to see fewer resources. Useful CSC processes and outputs should start with the recommendations of the 2009 NRC Report Informing Decisions in a Changing Climate: (1) begin with users' needs; (2) give priority to process over products; (3) link information producers and users; (4) build connections across disciplines and organizations

13. Environmental Approach In Interior Design Education In Turkey

Directory of Open Access Journals (Sweden)

2013-12-01

Full Text Available These days there has been a severe encroachment on nature, a large amount of waste being generated, and natural resources being used irresponsibly during the design, application and usage phases of buildings. Environmental sensitivity is necessary during the construction of new buildings and re-usage of current buildings to resolve environmental problems. In order to increase environmental sensitivity, a great responsibility falls onto interior design along with other disciplines during the creation of living spaces. The accumulation of knowledge from career training and the level of awareness will determine the practical development of environmentally sensitive interior design. Therefore the purpose of this article is to make a determination of the current state of environmental design in interior design education in Turkey. The degree to which environmental design is reflected in the curricula of interior design departments was studied. The relationship between the awareness level of the students and the educational programs will be presented through three samples. Surveys were conducted at three universities that have varying degrees of environmental design within the interior design curricula. As a result, the importance of having an environmentally conscious design understanding within the curricula of interior design and recommendations for improving the environmental design awareness of students will be presented in this article.

14. Effects of coloured lighting on the perception of interior spaces.

Science.gov (United States)

Odabaşioğlu, Seden; Olguntürk, Nіlgün

2015-02-01

Use of coloured lighting in interior spaces has become prevalent in recent years. Considerable importance is ascribed to coloured lighting in interior and lighting design. The effects of colour on the perception of interior spaces have been studied as surface colour; but here, the effects of three different types of chromatic light were investigated. The lighting differed in colour (red, green and white) and perceptions of interior space were assessed. 97 participants (59 women, 38 men; M age = 21.4 yr.) evaluated the experiment room on a questionnaire assessing eight evaluative factors: Pleasantness, Arousal, Aesthetics, Usefulness, Comfort, Spaciousness, Colour, and Lighting quality. Perceptions of the room differed by colour of lighting for some of the evaluative factors, but there was no sex difference in perceptions. Interior spaces may be perceived as equally pleasant under white, green and red lighting. Under white lighting a space is perceived as more useful, spacious, clear, and luminous. Green lighting would make the same effect. Green and white lighting were perceived equally comfortable in an interior space. Chromatic coloured lighting was perceived to be more aesthetic than white lighting. The results support previous findings for some evaluative factors, but differed for others.

15. Interior microelectrolysis oxidation of polyester wastewater and its treatment technology

Energy Technology Data Exchange (ETDEWEB)

Yang Xiaoyi, E-mail: yangxiaoyi@buaa.edu.cn [Department of Thermal Energy Engineering, BeiHang University, Beijing 100191 (China)

2009-09-30

This paper has investigated the effects of interior microelectrolysis pretreatment on polyester wastewater treatment and analyzed its mechanism on COD and surfactant removal. The efficiency of interior microelectrolysis is mainly influenced by solution pH, aeration and reaction time. Contaminants can be removed not only by redox reaction and flocculation in the result of ferrous and ferric hydroxides but also by electrophoresis under electric fields created by electron flow. pH confirms the chemical states of surfactants, Fe(II)/Fe(III) ratio and the redox potential, and thus influences the effects of electrophoresis, flocculation and redox action on contaminant removal. Anaerobic and aerobic batch tests were performed to study the degradation of polyester wastewater. The results imply that interior microelectrolysis and anaerobic pretreatment are lacking of effectiveness if applied individually in treating polyester wastewater in spite of their individual advantages. The interior microelectrolysis-anaerobic-aerobic process was investigated to treat polyester wastewater with comparison with interior microelectrolysis-aerobic process and anaerobic-aerobic process. High COD removal efficiencies have been gotten by the combination of interior microelectrolysis with anaerobic technology and aerobic technology. The results also imply that only biological treatment was less effective in polyester wastewater treatment.

16. Interior microelectrolysis oxidation of polyester wastewater and its treatment technology

International Nuclear Information System (INIS)

Yang Xiaoyi

2009-01-01

This paper has investigated the effects of interior microelectrolysis pretreatment on polyester wastewater treatment and analyzed its mechanism on COD and surfactant removal. The efficiency of interior microelectrolysis is mainly influenced by solution pH, aeration and reaction time. Contaminants can be removed not only by redox reaction and flocculation in the result of ferrous and ferric hydroxides but also by electrophoresis under electric fields created by electron flow. pH confirms the chemical states of surfactants, Fe(II)/Fe(III) ratio and the redox potential, and thus influences the effects of electrophoresis, flocculation and redox action on contaminant removal. Anaerobic and aerobic batch tests were performed to study the degradation of polyester wastewater. The results imply that interior microelectrolysis and anaerobic pretreatment are lacking of effectiveness if applied individually in treating polyester wastewater in spite of their individual advantages. The interior microelectrolysis-anaerobic-aerobic process was investigated to treat polyester wastewater with comparison with interior microelectrolysis-aerobic process and anaerobic-aerobic process. High COD removal efficiencies have been gotten by the combination of interior microelectrolysis with anaerobic technology and aerobic technology. The results also imply that only biological treatment was less effective in polyester wastewater treatment.

17. Scout-view assisted interior micro-CT

International Nuclear Information System (INIS)

Sharma, Kriti Sen; Narayanan, Shree; Agah, Masoud; Holzner, Christian; Vasilescu, Dragoş M; Jin, Xin; Hoffman, Eric A; Yu, Hengyong; Wang, Ge

2013-01-01

Micro computed tomography (micro-CT) is a widely-used imaging technique. A challenge of micro-CT is to quantitatively reconstruct a sample larger than the field-of-view (FOV) of the detector. This scenario is characterized by truncated projections and associated image artifacts. However, for such truncated scans, a low resolution scout scan with an increased FOV is frequently acquired so as to position the sample properly. This study shows that the otherwise discarded scout scans can provide sufficient additional information to uniquely and stably reconstruct the interior region of interest. Two interior reconstruction methods are designed to utilize the multi-resolution data without significant computational overhead. While most previous studies used numerically truncated global projections as interior data, this study uses truly hybrid scans where global and interior scans were carried out at different resolutions. Additionally, owing to the lack of standard interior micro-CT phantoms, we designed and fabricated novel interior micro-CT phantoms for this study to provide means of validation for our algorithms. Finally, two characteristic samples from separate studies were scanned to show the effect of our reconstructions. The presented methods show significant improvements over existing reconstruction algorithms. (paper)

18. Interior microelectrolysis oxidation of polyester wastewater and its treatment technology.

Science.gov (United States)

Yang, Xiaoyi

2009-09-30

This paper has investigated the effects of interior microelectrolysis pretreatment on polyester wastewater treatment and analyzed its mechanism on COD and surfactant removal. The efficiency of interior microelectrolysis is mainly influenced by solution pH, aeration and reaction time. Contaminants can be removed not only by redox reaction and flocculation in the result of ferrous and ferric hydroxides but also by electrophoresis under electric fields created by electron flow. pH confirms the chemical states of surfactants, Fe(II)/Fe(III) ratio and the redox potential, and thus influences the effects of electrophoresis, flocculation and redox action on contaminant removal. Anaerobic and aerobic batch tests were performed to study the degradation of polyester wastewater. The results imply that interior microelectrolysis and anaerobic pretreatment are lacking of effectiveness if applied individually in treating polyester wastewater in spite of their individual advantages. The interior microelectrolysis-anaerobic-aerobic process was investigated to treat polyester wastewater with comparison with interior microelectrolysis-aerobic process and anaerobic-aerobic process. High COD removal efficiencies have been gotten by the combination of interior microelectrolysis with anaerobic technology and aerobic technology. The results also imply that only biological treatment was less effective in polyester wastewater treatment.

19. DEMAND FOR POT PLANTS FOR INTERIOR DECORATION IN VIEW OF THE SURVEY CARRIED OUT IN POZNAŃ

Directory of Open Access Journals (Sweden)

Monika Henschke

2013-12-01

Full Text Available The aim of the study was to determine the demand for pot plants for interior decoration at various points of sale in Poznan. The results were based on questionnaires filled by clients of three retail sale points with pot plants: flower shop, horticultural centre and building material market in Poznan and its surroundings. Collected information was analysed for a frequency of purchases, amount of money spent on pot plants, place of purchases, occasions for which plant was bought, preferences of buyers and pattern of purchases. Customers purchase plants in various points of sale from 7 to 9 pot plants per year, mostly in horticultural centres and in spring. Plants are used for interior decoration and are cultivated for many years, however cut flowers are more often chosen for a gift than pot plants. Whereas a significant part of building material market customers cultivate flowers pot plants for a short time, and they buy pot plants for a gift as often as cut flowers. Among plants with flowers Phalaenopsis and Anthurium are selected most frequently, and Zamioculcas and Yucca among plants with decorative foliage. While choosing plants, buyers are guided by the overall appearance and price.

20. Effect of tides, river flow, and gate operations on entrainment of juvenile salmon into the interior Sacramento–San Joaquin River Delta

Science.gov (United States)

Perry, Russell W.; Brandes, Patricia L.; Burau, Jon R.; Sandstrom, Philip T.; Skalski, John R.

2015-01-01

Juvenile Chinook Salmon Oncorhynchus tshawytscha emigrating from natal tributaries of the Sacramento River, California, must negotiate the Sacramento-San Joaquin River Delta (hereafter, the Delta), a complex network of natural and man-made channels linking the Sacramento River with San Francisco Bay. Fish that enter the interior and southern Delta—the region to the south of the Sacramento River where water pumping stations are located—survive at a lower rate than fish that use alternative migration routes. Consequently, total survival decreases as the fraction of the population entering the interior Delta increases, thus spurring management actions to reduce the proportion of fish that are entrained into the interior Delta. To better inform management actions, we modeled entrainment probability as a function of hydrodynamic variables. We fitted alternative entrainment models to telemetry data that identified when tagged fish in the Sacramento River entered two river channels leading to the interior Delta (Georgiana Slough and the gated Delta Cross Channel). We found that the probability of entrainment into the interior Delta through both channels depended strongly on the river flow and tidal stage at the time of fish arrival at the river junction. Fish that arrived during ebb tides had a low entrainment probability, whereas fish that arrived during flood tides (i.e., when the river's flow was reversed) had a high probability of entering the interior Delta. We coupled our entrainment model with a flow simulation model to evaluate the effect of nighttime closures of the Delta Cross Channel gates on the daily probability of fish entrainment into the interior Delta. Relative to 24-h gate closures, nighttime closures increased daily entrainment probability by 3 percentage points on average if fish arrived at the river junction uniformly throughout the day and by only 1.3 percentage points if 85% of fish arrived at night. We illustrate how our model can be used to

1. Zero-point energy in bag models

International Nuclear Information System (INIS)

Milton, K.A.

1979-01-01

The zero-point (Casimir) energy of free vector (gluon) fields confined to a spherical cavity (bag) is computed. With a suitable renormalization the result for eight gluons is E = + 0.51/a. This result is substantially larger than that for a spherical shell (where both interior and exterior modes are present), and so affects Johnson's model of the QCD vacuum. It is also smaller than, and of opposite sign to, the value used in bag model phenomenology, so it will have important implications there. 1 figure

2. Emotion and interior space design: an ergonomic perspective.

Science.gov (United States)

Reddy, Swathi Matta; Chakrabarti, Debkumar; Karmakar, Sougata

2012-01-01

Interaction between the users and their environment is spontaneous and unavoidable. This interaction can be positive or negative. A good interior space is about considering all the physical, environmental and cognitive elements and harmonizing them to make it a space that feels right, functionally and emotionally. The important element that has to be considered the most in an interior space is the "user". Balancing all these elements is a challenging job and results in a perfect interior space design. This paper intends to bring to light the necessity of designing an optimum interior space, which is a balance of the user's choice and the mandatory standards that ought to be followed for user safety and convenience. There has to be an intervening domain of ergonomics which will guide to bring out a balance between the personal choice of the user and the usual standards followed. It should also provide a step-by-step information, guidance and direction to act to the specifications and standards systematically to adapt an integrated approach of handling all the elements holistically which will indeed result in a good interior space.

3. 26 CFR 49.4253-9 - Exemption for certain interior communication systems.

Science.gov (United States)

2010-04-01

... Exemption for certain interior communication systems. (a) In general. The taxes imposed by section 4251 do... rendered through the use of an interior communication system. (b) Interior communication system. The term “interior communication system” means any system: (1) No part of which is situated off the premises of the...

4. On ethics and the earthquake resistant interior design of buildings.

Science.gov (United States)

Hurol, Yonca

2014-03-01

5. PhD Thesis: Functional Textiles in Hospital Interiors

DEFF Research Database (Denmark)

Mogensen, Jeppe Emil

The PhD thesis explores the possibilities and design qualities of using functional textiles in the interior of hospital environments, and is the result of a three-year collaboration between Aalborg University, Department of Civil Engineering, and VIA University College, VIA Design. The thesis...... years, knowledge on the use of interior materials and textiles are still rather limited. Contemporary hospital design has been widely criticised of being too institutional and clinical, and one of the main reasons for this experience may be related to the use of ‘cold’, hard-surfaced materials...... of plastic, vinyl and steel. These materials also dominate the new hospitals, designed and constructed these years, and despite the increased focus on the design concept healing architecture, the rational requirements of ef cient cleaning and maintenance still seems to direct the interior design of hospital...

6. SYSTEMS OF INTERIOR STYLING AND TRAINING OF SPECIALISTS

Directory of Open Access Journals (Sweden)

samatdinov Marat Orynbaevich

2016-09-01

Full Text Available Increasing the quality of construction works and heat insulation efficiency of building envelope as well as providing additional fire proof and acoustic comfort suppose the use of special construction systems provided with the whole complex of components — composite construction systems. Composite interior systems include structural solutions of dividing walls, floors, suspended ceilings, inner facing of walls and fireproof facing, as well as assembling technology of these constructions. The main components of interior composite systems are gypsum board and gypsum-fiber sheets, gypsum-containing dry mortars. Less often gypsum partition blocks or panels based on Portland cement are used (cement fibrolite plates, aquapanels, etc.. The companies producing these materials are usually the movers of the creation of complex systems of interior facing. The systems are developed by leading Russian design organizations or engineering services of companies-the movers.

7. Measure Guideline: Summary of Interior Ducts in New Construction, Including an Efficient, Affordable Method to Install Fur-Down Interior Ducts

Energy Technology Data Exchange (ETDEWEB)

Beal, D. [BA-PIRC, Cocoa, FL (United States); McIlvaine, J. [BA-PIRC, Cocoa, FL (United States); Fonorow, K. [BA-PIRC, Cocoa, FL (United States); Martin, E. [BA-PIRC, Cocoa, FL (United States)

2011-11-01

This document illustrates guidelines for the efficient installation of interior duct systems in new housing, including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces.

8. An interior seaway for northern Africa

Energy Technology Data Exchange (ETDEWEB)

Champlin, J B.F. [Westinghouse Electric Corporation, Environmental Systems (United States); Poston, J W; Lake, J A [Georgia Institute of Technology (United States)

1970-05-15

One of the difficulties confronted in advancing explosives-engineering is that experimentation is both hazardous and expensive. This is particularly true of engineering experiments employing nuclear explosives, because there is a possibility that personnel located many miles from the center of the atomic blast may suffer from fallout or the migration of radioactivity through groundwater to public sources of drinking water. As a consequence, in order to establish courses of instruction in nuclear explosives engineering, it is necessary to use the special technique of deep consideration of a problem as a substitute for a laboratory exercise. This paper represents a summary of one such exercise in which students were assigned the task of performing the preliminary engineering on a project which could, if implemented, have considerable beneficial effect on a rather large area of the world. The possibilities of this project coming into being are quite remote in our time, largely due to the political ramifications and the current tendency to overemphasize the hazards of anything pertaining to nuclear explosions. But, as a classroom device, the use of the Project Analysis as a teaching tool has proved invaluable in training the students to think of the whole system involved rather than a part of it. This paper, primarily a summary of a report submitted by a student team in the course of Engineering with Nuclear Explosives at Georgia Tech in the summer of 1968, speaks for itself in its inventiveness and its expression of deliberate concern for the betterment of mankind. A minimal amount of additional material was added by the senior author to draw attention to recent related events and publications. The students named the study 'Project Pecos Bill' after an American folklore character, a mythical super cowboy who invented roping and other cowboy skills. During a very dry spell, Pecos Bill is said to have used a pointed stick to dig the Rio Grande River and bring water from

9. An interior seaway for northern Africa

International Nuclear Information System (INIS)

Champlin, J.B.F.; Poston, J.W.; Lake, J.A.

1970-01-01

One of the difficulties confronted in advancing explosives-engineering is that experimentation is both hazardous and expensive. This is particularly true of engineering experiments employing nuclear explosives, because there is a possibility that personnel located many miles from the center of the atomic blast may suffer from fallout or the migration of radioactivity through groundwater to public sources of drinking water. As a consequence, in order to establish courses of instruction in nuclear explosives engineering, it is necessary to use the special technique of deep consideration of a problem as a substitute for a laboratory exercise. This paper represents a summary of one such exercise in which students were assigned the task of performing the preliminary engineering on a project which could, if implemented, have considerable beneficial effect on a rather large area of the world. The possibilities of this project coming into being are quite remote in our time, largely due to the political ramifications and the current tendency to overemphasize the hazards of anything pertaining to nuclear explosions. But, as a classroom device, the use of the Project Analysis as a teaching tool has proved invaluable in training the students to think of the whole system involved rather than a part of it. This paper, primarily a summary of a report submitted by a student team in the course of Engineering with Nuclear Explosives at Georgia Tech in the summer of 1968, speaks for itself in its inventiveness and its expression of deliberate concern for the betterment of mankind. A minimal amount of additional material was added by the senior author to draw attention to recent related events and publications. The students named the study 'Project Pecos Bill' after an American folklore character, a mythical super cowboy who invented roping and other cowboy skills. During a very dry spell, Pecos Bill is said to have used a pointed stick to dig the Rio Grande River and bring water from

10. Interior near-field acoustical holography in flight.

Science.gov (United States)

Williams, E G; Houston, B H; Herdic, P C; Raveendra, S T; Gardner, B

2000-10-01

In this paper boundary element methods (BEM) are mated with near-field acoustical holography (NAH) in order to determine the normal velocity over a large area of a fuselage of a turboprop airplane from a measurement of the pressure (hologram) on a concentric surface in the interior of the aircraft. This work represents the first time NAH has been applied in situ, in-flight. The normal fuselage velocity was successfully reconstructed at the blade passage frequency (BPF) of the propeller and its first two harmonics. This reconstructed velocity reveals structure-borne and airborne sound-transmission paths from the engine to the interior space.

11. Conference on Boundary and Interior Layers : Computational and Asymptotic Methods

CERN Document Server

2015-01-01

This volume offers contributions reflecting a selection of the lectures presented at the international conference BAIL 2014, which was held from 15th to 19th September 2014 at the Charles University in Prague, Czech Republic. These are devoted to the theoretical and/or numerical analysis of problems involving boundary and interior layers and methods for solving these problems numerically. The authors are both mathematicians (pure and applied) and engineers, and bring together a large number of interesting ideas. The wide variety of topics treated in the contributions provides an excellent overview of current research into the theory and numerical solution of problems involving boundary and interior layers.  .

12. Interior drains for open pit disposal of uranium mill tailings

International Nuclear Information System (INIS)

Staub, W.P.

1978-01-01

A conceptualized interior drainage system is presented for reducing the environmental impact on natural groundwater by disposal of uranium mill tailings in the mined-out open pit. The evaporation/seepage ratio can be increased through the use of interior drains, long-term monitoring of groundwater quality can be eliminated, and the open pit will not require an extensive liner. Other advantages not related to groundwater are: control of fugitive dust and radon emanation during mill operations and timely reclamation after the impoundment is filled with tailings

13. Interior structure of rotating black holes. I. Concise derivation

International Nuclear Information System (INIS)

Hamilton, Andrew J. S.; Polhemus, Gavin

2011-01-01

This paper presents a concise derivation of a new set of solutions for the interior structure of accreting, rotating black holes. The solutions are conformally stationary, axisymmetric, and conformally separable. Hyper-relativistic counter-streaming between freely-falling collisionless ingoing and outgoing streams leads to mass inflation at the inner horizon, followed by collapse. The solutions fail at an exponentially tiny radius, where the rotational motion of the streams becomes comparable to their radial motion. The papers provide a fully nonlinear, dynamical solution for the interior structure of a rotating black hole from just above the inner horizon inward, down to a tiny scale.

14. Constraining the volatile budget of the lunar interior

Science.gov (United States)

Potts, N. J.; Bromiley, G. D.

2017-12-01

Measurements of volatiles (F, Cl, S, H2O) in a range of lunar samples confirm the presence of volatile material in lunar magmas. It remains unknown, however, where this volatile material is stored and when it was delivered to the Moon. On Earth, point defects within mantle olivine, and its high-pressure polymorphs, are thought to be the largest reservoir of volatile material. However, as volatiles have been cycled into and out of the Earth's mantle throughout geological time, via subduction and volcanism, this masks any original volatile signatures. As the Moon has no plate tectonics, it is expected that any volatile material present in the deep lunar interior would have been inherited during accretion and differentiation, providing insight into the delivery of volatiles to the early Earth-Moon system. Our aim was, therefore, to test the volatile storage capacity of the deep lunar mantle and determine mineral/melt partitioning for key volatiles. Experiments were performed in a primitive lunar mantle composition and run at relevant T, P, and at fO2 below the IW buffer. Experiments replicated the initial stages of LMO solidification with either olivine + melt, olivine + pyroxene + melt, or pyroxene + melt as the only phases present. Mineral-melt partition coefficients (Dx) derived for volatile material (F, Cl, S, H2O) vary significantly compared to those derived for terrestrial conditions. An order of magnitude more H2O was found to partition into lunar olivine compared to the terrestrial upper mantle. DF derived for lunar olivine are comparable to the highest terrestrial derived values whilst no Cl was found to partition into lunar olivine under these conditions. Furthermore, an inverse trend between DF and DOH hints towards coupled-substitution mechanisms between H and F under low-fO2/lunar bulk composition. These results suggest that if volatile material was present in the LMO a significant proportion could be partitioned into the lower lunar mantle. The

15. Point-like bounding chains in open Gromov-Witten theory

OpenAIRE

Solomon, Jake P.; Tukachinsky, Sara B.

2016-01-01

We use $A_\\infty$ algebras to define open Gromov-Witten invariants with both boundary and interior constraints, associated to a Lagrangian submanifold $L\\subset X$ of arbitrary odd dimension. The boundary constraints are bounding chains, which are shown to behave like points. The interior constraints are arbitrary even degree classes in the cohomology of $X$ relative to $L.$ We show the invariants satisfy analogs of the axioms of closed Gromov-Witten theory. Our definition of invariants depen...

16. Technical Drafting and Mental Visualization in Interior Architecture Education

Science.gov (United States)

Arslan, Ali Riza; Dazkir, Sibel Seda

2017-01-01

We explored how beginning-level interior architecture students develop skills to create mental visualizations of three-dimensional objects and environments, how they develop their technical drawing skills, and whether or not physical and computer generated models aid this design process. We used interviews and observations to collect data. The…

17. Interior design of a two-dimensional semiclassical black hole

Science.gov (United States)

Levanony, Dana; Ori, Amos

2009-10-01

We look into the inner structure of a two-dimensional dilatonic evaporating black hole. We establish and employ the homogenous approximation for the black-hole interior. Two kinds of spacelike singularities are found inside the black hole, and their structure is investigated. We also study the evolution of spacetime from the horizon to the singularity.

18. Computer-assisted ergonomic analysis for vehicle interior design

NARCIS (Netherlands)

Punte, P.A.J.; Oudenhuijzen, A.J.K.

2000-01-01

TNO Human Factors is involved in the process of designing and testing a new concept for driver workplaces in passenger cars, i.e. with a horizontally fixed driver seat and adjustable pedals, steering wheel and instrument panel. This new concept is intended to achieve an interior space and

19. Radon measurements in the interior of the great pyramid

Energy Technology Data Exchange (ETDEWEB)

Kenawy, M A; Morsy, A A [Ain Shams Univ., Cairo (Egypt). College for Girls

1991-01-01

Radon concentration measurements were made in the interior of the great pyramid of ''Cheops'' at Giza. Measurements were carried out using CR-39 as a solid state nuclear track detector. The CR-39 sheets were placed inside the Queen's and King's chambers and along the ascending corridor leading to them. An evaluation of the radon concentration is presented and discussed. (author).

20. Penerapan Tipografi dalam Sistem Signage pada Interior Ruang Publik

OpenAIRE

Ulli Aulia Ruki; Amarena Nediari

2014-01-01

Sistem signage diaplikasikan pada sebuah interior ruang publik dengan memerhatikan dasar tipografi. Manfaat signage adalah memberikan kemudahan para pengguna ruang publik dalam mencapai tujuan saat mereka berada di dalam sebuah bangunan. Hal mendasar yang perlu diperhatikan dalam merencanakan sistem signage adalah kejelasan bentuk huruf serta kemudahan untuk dibaca. Masih banyak desainer yang kurang memerhatikan desain signage, sehingga terkadang desainnya memberikan kesan hanya s...

1. 77 FR 45650 - Interior Fire Program Assessment 2012

Science.gov (United States)

2012-08-01

... the Interior, Environment, and Related Agencies Appropriation Bill for fiscal year 2012, the House of... management services in support of the Departmental and bureau missions and to better direct scarce resources... been conducted as they are a major partner in the Federal wildland fire management program. On June 19...

2. Research on the Interior Sound Quality in Hybrid Electric Vehicle

Directory of Open Access Journals (Sweden)

Liao Lian Ying

2016-01-01

Full Text Available Even the overall level of vehicle interior noise of hybrid electric vehicle (HEV reduced to a certain degree, the vibration and noise generated by the engine, motor, generator and power split have made greater effect on the vehicle interior sound quality in HEV. In order to research the feature of vehicle interior sound quality in HEV, the HEV is used to be the research object, the binaural noise sample of the driver when playing different kinds of music in the vehicle with the speed of sixty kilometers per hour is collected. ArtemiS is used to conduct frequency division processing, so as to obtain the relative weight of each frequency band and the overall noise. The tone, roughness and sharpness of sound quality subjective evaluation parameters are quantified, the SPSS is used to establish the linear regression model of the sample, and the best masking music tracks are found out. Then, the sound samples that contains the best music tracks and the simple vehicle interior noise are re-collected, the regression model and ArtemiS are used to predict the subjective evaluation value. The research results show that when adding the music, the tone degree rises and the lowering degree decreases, thus the disturbing degree reduces, which significantly improves the sound quality in the HEV.

3. Non-static vacuum strings: exterior and interior solutions

International Nuclear Information System (INIS)

Stein-Schabes, J.A.

1986-01-01

New non-static cylindrically symmetric solutions of Einsteins's equations are presented. Some of these solutions represent string-like objects. An exterior vacuum solution is matched to a non-vacuum interior solution for different forms of the energy-momentum tensor. They generalize the standard static string. 12 refs

4. Exploring the Effectiveness of Blended Learning in Interior Design Education

Science.gov (United States)

Afacan, Yasemin

2016-01-01

This study explores how blended learning can contribute to interior design students' learning outcomes, their engagement with non-studio courses and affect their learning achievements. Within the framework of the study, a blended learning experience was carried out in "IAED 342 Building Performance" module at Bilkent University, Turkey.…

5. U-CrAc Flexible Interior Doctrine, Agile Learning Environments

DEFF Research Database (Denmark)

Poulsen, Søren Bolvig; Rosenstand, Claus Andreas Foss

2012-01-01

6. Interior design of a two-dimensional semiclassical black hole

International Nuclear Information System (INIS)

Levanony, Dana; Ori, Amos

2009-01-01

We look into the inner structure of a two-dimensional dilatonic evaporating black hole. We establish and employ the homogenous approximation for the black-hole interior. Two kinds of spacelike singularities are found inside the black hole, and their structure is investigated. We also study the evolution of spacetime from the horizon to the singularity.

7. The Integration of Interior Architecture Education with Digital Design Approaches

Science.gov (United States)

Yazicioglu, Deniz Ayse

2011-01-01

It is inevitable that as a result of progress in technology and the changes in the ways with which design is conceived, interior architecture schools should be updated according to these requirements and that new educational processes should be tried out. It is for this reason that the scope and aim of this study have been determined as being the…

8. Service-Learning and Interior Design: A Case Study

Science.gov (United States)

Sterling, Mary

2007-01-01

The case study approach was used to analyze experiential learning through its three components: knowledge, action, and reflection. Two interior design courses were integrated through a university service-learning project. The restoration/adaptive reuse of a 95-year-old library building was to serve as a prototype for future off-campus…

9. Group Projects in Interior Design Studio Classes: Peer Feedback Benefits

Science.gov (United States)

2011-01-01

Group projects have been shown to be effective for providing peer feedback in classrooms. While students in regular enrollment classes benefit from peer feedback, low-enrollment classes face many challenges. This study compares peer feedback effectiveness between two interior design studio classes with different design projects. In one class,…

10. The Neutron star Interior Composition Explorer (NICER): design and development

DEFF Research Database (Denmark)

Gendreau, Keith C.; Arzoumanian, Zaven; Adkins, Phillip W.

2016-01-01

During 2014 and 2015, NASA's Neutron star Interior Composition Explorer (NICER) mission proceeded successfully through Phase C, Design and Development. An X-ray (0.2-12 keV) astrophysics payload destined for the International Space Station, NICER is manifested for launch in early 2017...

11. Perceptions of Interior Design Program Chairs Regarding Credentials for Faculty

Science.gov (United States)

Miller, Beth R.

2017-01-01

The purpose of this study was to determine whether program chairs in interior design have a preferred degree credential for candidates seeking a full-time, tenure-track position or other full-time position at their institution and to determine if there is a correlation between this preference and the program chair's university's demographics,…

12. Improving FCS Accountability: Increasing STEM Awareness with Interior Design Modules

Science.gov (United States)

Etheredge, Jessica; Moody, Dana; Cooper, Ashley

2014-01-01

This paper demonstrates ways in which family and consumer sciences (FCS) educators can explore more opportunities to integrate Science, Technology, Engineering, and Math (STEM) principles into secondary education curriculum. Interior design is used as a case study for creating learning modules that incorporate STEM principles in a creative and…

13. Group Dynamics in the Interior Design Studio: Student Perceptions

Science.gov (United States)

Hill, Caroline

2008-01-01

This article presents the findings of a study measuring the classroom climates in collegiate interior design studios and considers these findings within the group dynamics theory framework. Three groups of students completed the College Classroom Environment Scales (CCES) questionnaire. Five of the six CCES subscale F ratios were statistically…

14. Emergency evacuation : how better interior design can improve passenger flow

NARCIS (Netherlands)

Boer, L.C.; Skjong, R.

2001-01-01

The paper presents some conclusions from the EU basic research project "MEPdesign" relevant for design of ship interiors. The findings are discussed with regard to passenger flow as a function of design parameters. The paper explains that current evacuation analyses may be overly optimistic. The

15. Possibilities to improve the aircraft interior comfort experience

NARCIS (Netherlands)

Vink, P.; Bazley, C.; Kamp, I.; Blok, M.

2012-01-01

Comfort plays an increasingly important role in the interior design of airplanes. Although ample research has been conducted on airplane design technology, only a small amount of public scientific information is available addressing the passenger's opinion. In this study, more than 10,000 internet

16. The Attitudes of Interior Design Students towards Sustainability

Science.gov (United States)

Ruff, Caimen Leigh; Olson, Margot A.

2009-01-01

To measure attitudes toward environmental issues, interior design students responded to a four-part survey: demographics, ecology, sustainability, and comments. The ecology section was composed of modifications of questions from the New Ecological Paradigm Scale (Dunlap et al. "Journal of Environmental Education," 9:10-19, 2000). The researchers…

17. Generators with interior degeneracy on spaces of L^2 type

Directory of Open Access Journals (Sweden)

Genni Fragnelli

2012-10-01

Full Text Available We consider operators in divergence and in nondivergence form with degeneracy at the interior of the space domain. Characterizing the domain of the operators, we prove that they generate positive analytic semigroups on spaces of L^2 type. Finally, some applications to linear and semilinear parabolic evolution problems and to linear hyperbolic ones are presented.

18. Pertimbangan Aspek Kejiwaan terhadap Feng Shui dalam Perancangan Interior

OpenAIRE

C. Indrani, Hedy

2003-01-01

The truth of applying feng shui in interior design is always doubted because feng shui is still consider mystically, unlogic, and unusual, therefore it needs facts of this potential feng shui. As knowledge, feng shui psychologically plays important role for home design that it increases psychological life of the residents.

19. Resonant inverter supplied Interior Permanent Magnet (IPM) motor ...

African Journals Online (AJOL)

In this paper, rotor position in relation to the resonant frequency component current in the stator winding of DC-voltage link resonant inverter supplied Interior Permanent Magnet (IPM) motor has been developed. Six reference frames are used to relate the rotor position angle to the resonant frequency component current ...

20. Hot-start Giant Planets Form with Radiative Interiors

Energy Technology Data Exchange (ETDEWEB)

Berardo, David; Cumming, Andrew, E-mail: david.berardo@mcgill.ca, E-mail: andrew.cumming@mcgill.ca [Department of Physics and McGill Space Institute, McGill University, 3600 rue University, Montreal, QC H3A 2T8 (Canada)

2017-09-10

In the hot-start core accretion formation model for gas giants, the interior of a planet is usually assumed to be fully convective. By calculating the detailed internal evolution of a planet assuming hot-start outer boundary conditions, we show that such a planet will in fact form with a radially increasing internal entropy profile, so that its interior will be radiative instead of convective. For a hot outer boundary, there is a minimum value for the entropy of the internal adiabat S {sub min} below which the accreting envelope does not match smoothly onto the interior, but instead deposits high entropy material onto the growing interior. One implication of this would be to at least temporarily halt the mixing of heavy elements within the planet, which are deposited by planetesimals accreted during formation. The compositional gradient this would impose could subsequently disrupt convection during post-accretion cooling, which would alter the observed cooling curve of the planet. However, even with a homogeneous composition, for which convection develops as the planet cools, the difference in cooling timescale will change the inferred mass of directly imaged gas giants.

1. Temporal Variation of Large Scale Flows in the Solar Interior ...

tribpo

Temporal Variation of Large Scale Flows in the Solar Interior. 355. Figure 2. Zonal and meridional components of the time-dependent residual velocity at a few selected depths as marked above each panel, are plotted as contours of constant velocity in the longitude-latitude plane. The left panels show the zonal component, ...

2. A smartphone photogrammetry method for digitizing prosthetic socket interiors.

Science.gov (United States)

Hernandez, Amaia; Lemaire, Edward

2017-04-01

Prosthetic CAD/CAM systems require accurate 3D limb models; however, difficulties arise when working from the person's socket since current 3D scanners have difficulties scanning socket interiors. While dedicated scanners exist, they are expensive and the cost may be prohibitive for a limited number of scans per year. A low-cost and accessible photogrammetry method for socket interior digitization is proposed, using a smartphone camera and cloud-based photogrammetry services. 15 two-dimensional images of the socket's interior are captured using a smartphone camera. A 3D model is generated using cloud-based software. Linear measurements were comparing between sockets and the related 3D models. 3D reconstruction accuracy averaged 2.6 ± 2.0 mm and 0.086 ± 0.078 L, which was less accurate than models obtained by high quality 3D scanners. However, this method would provide a viable 3D digital socket reproduction that is accessible and low-cost, after processing in prosthetic CAD software. Clinical relevance The described method provides a low-cost and accessible means to digitize a socket interior for use in prosthetic CAD/CAM systems, employing a smartphone camera and cloud-based photogrammetry software.

3. Remarks on interior transmission eigenvalues, Weyl formula and branching billiards

International Nuclear Information System (INIS)

Lakshtanov, E; Vainberg, B

2012-01-01

This paper contains the Weyl formula for the counting function of the interior transmission problem when the latter is parameter elliptic. Branching billiard trajectories are constructed, and the second term of the Weyl asymptotics is estimated from above under some conditions on the set of periodic billiard trajectories. (paper)

4. 49 CFR 38.155 - Interior circulation, handrails and stanchions.

Science.gov (United States)

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Interior circulation, handrails and stanchions. 38.155 Section 38.155 Transportation Office of the Secretary of Transportation AMERICANS WITH... passenger from the door through the boarding procedure. Passengers shall be able to lean against the assist...

5. 49 CFR 38.29 - Interior circulation, handrails and stanchions.

Science.gov (United States)

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Interior circulation, handrails and stanchions. 38.29 Section 38.29 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES... boarding passenger from the front door through the boarding procedure. Passengers shall be able to lean...

6. 49 CFR 38.77 - Interior circulation, handrails and stanchions.

Science.gov (United States)

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Interior circulation, handrails and stanchions. 38.77 Section 38.77 Transportation Office of the Secretary of Transportation AMERICANS WITH DISABILITIES... passenger from the door through the boarding procedure. Passengers shall be able to lean against the assist...

7. Woody debris dynamics in Interior West forests and woodlands

Science.gov (United States)

John D. Shaw; James Long; Raffaella Marzano; Matteo Garbarino

2012-01-01

Managers are interested in the dynamics of down woody material because of its role as a fuel component, a feature of wildlife habitat, a carbon pool, and other characteristics. We analyzed nearly 9,000 plots from the Interior West, spanning the range from sparse juniper and mesquite woodland to dense spruce-fir forests, in order to characterize down woody material as...

8. Forward scatter radar for remote intelligence of building interiors

NARCIS (Netherlands)

Rossum, W.L. van; Wit, J.J.M. de

2017-01-01

Through-wall radar allows for remote intelligence of building interiors including stand-off detection and tracking of persons inside a building. However, reliable radar tracking of people inside a building is not trivial. Conventional, monostatic through-wall radar measures the backscatter of moving

9. Perancangan Interior Nestlé's Cereal World Di Surabaya

OpenAIRE

Mariana Wibowo, Linda Gunawan

2014-01-01

Nestlé's Cereal World is a new facility in foodservice industry, which people can explore and obtain a new experience about cereal through 4 main facilities: attraction, discover, dining, and shopping. Nestlé's Cereal World design will use Nestlé's interior branding, which the tangible and intangible design will represent the Nestlé's Cereal identity.

10. Young Children's Color Preferences in the Interior Environment

Science.gov (United States)

2009-01-01

This study focuses on children's color preferences in the interior environment. Previous studies highlight young children's preferences for the colors red and blue. The methods of this study used a rank ordering technique and a semi-structured interview process with 3-, 4-, and 5-year-old children. Findings reveal that children prefer the color…

11. Radon measurements in the interior of the great pyramid

International Nuclear Information System (INIS)

Kenawy, M.A.; Morsy, A.A.

1991-01-01

Radon concentration measurements were made in the interior of the great pyramid of ''Cheops'' at Giza. Measurements were carried out using CR-39 as a solid state nuclear track detector. The CR-39 sheets were placed inside the Queen's and King's chambers and along the ascending corridor leading to them. An evaluation of the radon concentration is presented and discussed. (author)

12. Exact solution for the interior of a black hole

NARCIS (Netherlands)

Nieuwenhuizen, T.M.

2008-01-01

Within the Relativistic Theory of Gravitation it is shown that the equation of state p = rho holds near the center of a black hole. For the stiff equation of state p = rho - rho(c) the interior metric is solved exactly. It is matched with the Schwarzschild metric, which is deformed in a narrow range

13. Pengaruh Elemen Interior Restoran terhadap Pengalaman Nostalgia Konsumen

Directory of Open Access Journals (Sweden)

Miranti Sari Rahma

2017-09-01

Full Text Available Selama beberapa tahun terakhir, restoran bertema "nostalgia" menjadi populer di Bandung. Penelitian ini bertujuan untuk mengeksplorasi unsur-unsur lingkungan yang disukai konsumen di restoran yang dapat mempengaruhi respon pengalaman nostalgia konsumen di restoran. Penelitian ini menggunakan metode deskriptif eksploratif untuk menentukan variabel yang dapat digunakan sebagai stimulus eksperimen berikutnya guna mendapatkan respon persepsi, emosi, dan sikap. Data hasil eksperimen dianalisis menggunakan ANOVA, menunjukkan bahwa (1 elemen interior restoran yang paling mempengaruhi pengalaman nostalgia konsumen di restoran; (2 meskipun gaya modern dapat membangkitkan respon persepsi, emosi dan sikap nostalgia, elemen dekoratif dan furnitur kolonial paling efektif dapat membangkitkan pengalaman nostalga; (3 ditemukan juga hubungan antara persepsi, emosi, dan sikap kaitannya dengan proses persepsi, emosi dapat mempengaruhi sikap konsumen di restoran, hal ini sejalan dengan mekanisme persepsi dimana kontribusi pengalaman masa lalu dapat membangkitkan emosi sehingga mempengaruhi persepsi dan munculnya sikap konsumen di restoran. Effect of Restaurant Interior Elements on Consumer Nostalgic Experience Abstract. In the last few years, ‘nostalgic’ restaurants have become quite popular in Bandung. This study was aimed at exploring interior elements that may evoke a nostalgic experience in consumers in a restaurant. In this study, an exploratory descriptive method was applied to determine the variables to be used as stimulus in the experiment to get perception, emotion, and attitude responses. The data of this research were analyzed by ANOVA and showed that: (1 interior elements of the restaurant influenced the nostalgic experience by consumers; (2 colonial decorative elements and colonial style furniture, even if other interior elements have a modern style, can evoke nostalgic perceptions, emotions, and attitudes; (3 a link was found between perceptions

14. Applications of Panoramic Images: from 720° Panorama to Interior 3d Models of Augmented Reality

Science.gov (United States)

Lee, I.-C.; Tsai, F.

2015-05-01

A series of panoramic images are usually used to generate a 720° panorama image. Although panoramic images are typically used for establishing tour guiding systems, in this research, we demonstrate the potential of using panoramic images acquired from multiple sites to create not only 720° panorama, but also three-dimensional (3D) point clouds and 3D indoor models. Since 3D modeling is one of the goals of this research, the location of the panoramic sites needed to be carefully planned in order to maintain a robust result for close-range photogrammetry. After the images are acquired, panoramic images are processed into 720° panoramas, and these panoramas which can be used directly as panorama guiding systems or other applications. In addition to these straightforward applications, interior orientation parameters can also be estimated while generating 720° panorama. These parameters are focal length, principle point, and lens radial distortion. The panoramic images can then be processed with closerange photogrammetry procedures to extract the exterior orientation parameters and generate 3D point clouds. In this research, VisaulSFM, a structure from motion software is used to estimate the exterior orientation, and CMVS toolkit is used to generate 3D point clouds. Next, the 3D point clouds are used as references to create building interior models. In this research, Trimble Sketchup was used to build the model, and the 3D point cloud was added to the determining of locations of building objects using plane finding procedure. In the texturing process, the panorama images are used as the data source for creating model textures. This 3D indoor model was used as an Augmented Reality model replacing a guide map or a floor plan commonly used in an on-line touring guide system. The 3D indoor model generating procedure has been utilized in two research projects: a cultural heritage site at Kinmen, and Taipei Main Station pedestrian zone guidance and navigation system. The

15. The End of Points

Science.gov (United States)

Feldman, Jo

2018-01-01

Have teachers become too dependent on points? This article explores educators' dependency on their points systems, and the ways that points can distract teachers from really analyzing students' capabilities and achievements. Feldman argues that using a more subjective grading system can help illuminate crucial information about students and what…

16. Demerit points systems.

NARCIS (Netherlands)

2006-01-01

In 2012, 21 of the 27 EU Member States had some form of demerit points system. In theory, demerit points systems contribute to road safety through three mechanisms: 1) prevention of unsafe behaviour through the risk of receiving penalty points, 2) selection and suspension of the most frequent

17. Maestrichtian benthic foraminifers from Ocean Point, North Slope, Alaska ( USA).

Science.gov (United States)

McDougall, K.

1987-01-01

Previous studies of fauna and flora from Ocean Point, Alaska, have suggested ages ranging from Campanian to early Eocene and that these assemblages are either highly endemic or commonplace. I demonstrate that the moderately abundant benthic foraminifers constitute early Maestrichtian boreal assemblages common to Canada and northern Europe. Paleoenvironmental analysis indicates that deposition took place in outer neritic settings (50 to 150m). The Ocean Point benthic foraminiferal assemblages contain species that migrated from the US Gulf Coast, North American Interior and Europe during the Campanian, and from Europe during the Maestrichtian. These faunal affinities suggest that seaways connected the Arctic to the North American Interior and Atlantic during the Campanian and that a shallow seaway connected the Arctic to the Atlantic during the early Maestrichtian. - from Author

18. Point specificity in acupuncture

Directory of Open Access Journals (Sweden)

Choi Emma M

2012-02-01

Full Text Available Abstract The existence of point specificity in acupuncture is controversial, because many acupuncture studies using this principle to select control points have found that sham acupoints have similar effects to those of verum acupoints. Furthermore, the results of pain-related studies based on visual analogue scales have not supported the concept of point specificity. In contrast, hemodynamic, functional magnetic resonance imaging and neurophysiological studies evaluating the responses to stimulation of multiple points on the body surface have shown that point-specific actions are present. This review article focuses on clinical and laboratory studies supporting the existence of point specificity in acupuncture and also addresses studies that do not support this concept. Further research is needed to elucidate the point-specific actions of acupuncture.

19. Recording and Modelling of MONUMENTS' Interior Space Using Range and Optical Sensors

Science.gov (United States)

Georgiadis, Charalampos; Patias, Petros; Tsioukas, Vasilios

2016-06-01

Three dimensional modelling of artefacts and building interiors is a highly active research field in our days. Several techniques are being utilized to perform such a task, spanning from traditional surveying techniques and photogrammetry to structured light scanners, laser scanners and so on. New technological advancements in both hardware and software create new recording techniques, tools and approaches. In this paper we present a new recording and modelling approach based on the SwissRanger SR4000 range camera coupled with a Canon 400D dSLR camera. The hardware component of our approach consists of a fixed base, which encloses the range and SLR cameras. The two sensors are fully calibrated and registered to each other thus we were able to produce colorized point clouds acquired from the range camera. In this paper we present the initial design and calibration of the system along with experimental data regarding the accuracy of the proposed approach. We are also providing results regarding the modelling of interior spaces and artefacts accompanied with accuracy tests from other modelling approaches based on photogrammetry and laser scanning.

20. Numerical computations of interior transmission eigenvalues for scattering objects with cavities

International Nuclear Information System (INIS)

Peters, Stefan; Kleefeld, Andreas

2016-01-01

In this article we extend the inside-outside duality for acoustic transmission eigenvalue problems by allowing scattering objects that may contain cavities. In this context we provide the functional analytical framework necessary to transfer the techniques that have been used in Kirsch and Lechleiter (2013 Inverse Problems, 29 104011) to derive the inside-outside duality. Additionally, extensive numerical results are presented to show that we are able to successfully detect interior transmission eigenvalues with the inside-outside duality approach for a variety of obstacles with and without cavities in three dimensions. In this context, we also discuss the advantages and disadvantages of the inside-outside duality approach from a numerical point of view. Furthermore we derive the integral equations necessary to extend the algorithm in Kleefeld (2013 Inverse Problems, 29 104012) to compute highly accurate interior transmission eigenvalues for scattering objects with cavities, which we will then use as reference values to examine the accuracy of the inside-outside duality algorithm. (paper)

1. Measure Guideline: Summary of Interior Ducts in New Construction, Including an Efficient, Affordable Method to Install Fur-Down Interior Ducts

Energy Technology Data Exchange (ETDEWEB)

Beal, D.; McIlvaine , J.; Fonorow, K.; Martin, E.

2011-11-01

This document illustrates guidelines for the efficient installation of interior duct systems in new housing, including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces. This document illustrates guidelines for the efficient installation of interior duct systems in new housing. Interior ducts result from bringing the duct work inside a home's thermal and air barrier. Architects, designers, builders, and new home buyers should thoroughly investigate any opportunity for energy savings that is as easy to implement during construction, such as the opportunity to construct interior duct work. In addition to enhanced energy efficiency, interior ductwork results in other important advantages, such as improved indoor air quality, increased system durability and increased homeowner comfort. While the advantages of well-designed and constructed interior duct systems are recognized, the implementation of this approach has not gained a significant market acceptance. This guideline describes a variety of methods to create interior ducts including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces. As communication of the intent of an interior duct system, and collaboration on its construction are paramount to success, this guideline details the critical design, planning, construction, inspection, and verification steps that must be taken. Involved in this process are individuals from the design team; sales/marketing team; and mechanical, insulation, plumbing, electrical, framing, drywall and solar contractors.

2. Semantic feature extraction for interior environment understanding and retrieval

Science.gov (United States)

Lei, Zhibin; Liang, Yufeng

1998-12-01

In this paper, we propose a novel system of semantic feature extraction and retrieval for interior design and decoration application. The system, V2ID(Virtual Visual Interior Design), uses colored texture and spatial edge layout to obtain simple information about global room environment. We address the domain-specific segmentation problem in our application and present techniques for obtaining semantic features from a room environment. We also discuss heuristics for making use of these features (color, texture, edge layout, and shape), to retrieve objects from an existing database. The final resynthesized room environment, with the original scene and objects from the database, is created for the purpose of animation and virtual walk-through.

3. Modal response of interior mass based upon external measurements

International Nuclear Information System (INIS)

Chow, C T; Eli, M; Jorgensen, B R; Woehrle, T.

1999-01-01

Modal response testing has been used to predict the motion of interior masses of a system in which only external instrumentation is allowed. Testing of this form may occasionally be necessary in validation of a computer model, but also has potential as a tool for validating individual assemblies in a QA process. Examination of the external frequency response and mode shapes can offer insight into interior response. The interpretation of these results is improved through parallel analytical solutions. A simple, three-mass model has been examined experimentally and analytically to demonstrate modal theory. These results show the limitations of the external measurement in predicting internal response due to transmissibility. A procedure for utilizing external testing is described. The question posed through this research is whether or not modal correlation analysis can be adapted for use in systems for which instrumentation of critical components is missing

4. Plasma Decontamination of Uranium From the Interior of Aluminum Objects

International Nuclear Information System (INIS)

Veilleux, J.M.; Munson, C.; Fitzpatrick, J.; Chamberlin, E.P.; El-Genk, M.S.

1997-01-01

RF plasma glow discharges are being investigated for removing and recovering radioactive elements from contaminated objects, especially those contaminated with transuranic (TRU) materials. These plasmas, using nitrogen trifluoride as the working gas, have been successful at removing uranium and plutonium contaminants from test coupons of stainless steel and aluminum surfaces, including small cracks and crevices, and the interior surfaces of relatively hard to reach aluminum pipes. Contaminant removal exceeded 99.9% from simple surfaces and contaminant recovery using cryogenic traps has exceeded 50%. Work continues with the objective of demonstrating that transuranic contaminated waste can be transformed to low level waste (LLW) and to better understand the physics of the interaction between plasma and surface contaminants. This work summarizes the preliminary results from plasma decontamination from the interior of aluminum objects--the nooks and crannies experiments

5. Numerical simulation of effect of laser nonuniformity in interior interface

International Nuclear Information System (INIS)

Yu Xiaojin; Wu Junfeng; Ye Wenhua

2007-01-01

Using the LARED-S code and referring to the NIF direct-drive DT ignition target, the effect of laser nonuniformity on the interior interface in direct-drive spherical implosion with high convergence ratio was numerically studied. The two-dimensional results show that the implosion with high convergence ratio is sensitive to the nonuniformity of driving laser, and the growth of hydrodynamic instability on interior interface destroys the symmetric-drive and reduces the volume of central hot spot observably. Taking the limit that perturbation amplitude is equal to 1/3 radius of central hot spot, the simulation also gives that the requirements for the laser uniformity for different mode number(less than 12) on simple physical model are between 2.5% -0.25%, and the modes between 8-10 have the most rigorous requirement which is about 0.25%. (authors)

6. Numerical simulation of interior flow field of nuclear model pump

International Nuclear Information System (INIS)

Wang Chunlin; Peng Na; Kang Can; Zhao Baitong; Zhang Hao

2009-01-01

Reynolds time-averaged N-S equations and the standard k-ε turbulent model were adopted, and three-dimensional non-structural of tetrahedral mesh division was used for modeling. Multiple reference frame model of rotating fluid mechanical model was used, under the design condition, the three-dimensional incompressible turbulent flow of nuclear model pump was simulated, and the results preferably post the characteristics of the interior flow field. This paper first analyzes the total pressure and velocity distribution in the flow field, and then describes the interior flow field characteristics of each part such as the impeller, diffuser and spherical shell, and also discusses the reasons that cause these characteristics. The study results can be used to estimate the performance of nuclear model pump, and will provide some useful references for its hydraulic optimized design. (authors)

7. Concrete as secondary containment for interior wall embedded waste lines

International Nuclear Information System (INIS)

Porter, C.L.

1993-01-01

Throughout the Department of Energy (DOE) complex are numerous facilities that handle hazardous waste solutions. Secondary containment of tank systems and their ancillary piping is a major concern for existing facilities. The Idaho Division of Environmental Quality was petitioned in 1990 for an Equivalent Device determination regarding secondary containment of waste lines embedded in interior concrete walls. The petition was granted, however it expires in 1996. To address the secondary containment issue, additional studies were undertaken. One study verified the hypothesis that an interior wall pipe leak would follow the path of least resistance through the naturally occurring void found below a rigidly supported pipe and pass into an adjacent room where detection could occur, before any significant deterioration of the concrete takes place. Other tests demonstrated that with acidic waste solutions rebar and cold joints are not an accelerated path to the environment. The results from these latest studies confirm that the subject configuration meets all the requirements of secondary containment

8. Early warning signal for interior crises in excitable systems.

Science.gov (United States)

Karnatak, Rajat; Kantz, Holger; Bialonski, Stephan

2017-10-01

The ability to reliably predict critical transitions in dynamical systems is a long-standing goal of diverse scientific communities. Previous work focused on early warning signals related to local bifurcations (critical slowing down) and nonbifurcation-type transitions. We extend this toolbox and report on a characteristic scaling behavior (critical attractor growth) which is indicative of an impending global bifurcation, an interior crisis in excitable systems. We demonstrate our early warning signal in a conceptual climate model as well as in a model of coupled neurons known to exhibit extreme events. We observed critical attractor growth prior to interior crises of chaotic as well as strange-nonchaotic attractors. These observations promise to extend the classes of transitions that can be predicted via early warning signals.

9. Strange distance: towards an anthropology of interior dialogue.

Science.gov (United States)

Irving, Andrew

2011-03-01

The capacity for a complex inner life--encompassing inner speech, imaginative reverie, and unarticulated moods--is an essential feature of living with illness and a principal means through which people interpret, understand, and manage their condition. Nevertheless, anthropology lacks a generally accepted theory or methodological framework for understanding how interiority relates to people's public actions and expressions. Moreover, as conventional social-scientific methods are often too static to understand the fluidity of perception among people living with illness or bodily instability, I argue we need to develop new, practical approaches to knowing. By placing the problem of interiority directly into the field and turning it into an ethnographic, practice-based question to be addressed through fieldwork in collaboration with informants, this article works alongside women living with HIV/AIDS in Uganda with the aim of capturing the unvoiced but sometimes radical changes in being, belief, and perception that accompany terminal illness.

10. Possibilities to improve the aircraft interior comfort experience.

Science.gov (United States)

Vink, P; Bazley, C; Kamp, I; Blok, M

2012-03-01

Comfort plays an increasingly important role in the interior design of airplanes. Although ample research has been conducted on airplane design technology, only a small amount of public scientific information is available addressing the passenger's opinion. In this study, more than 10,000 internet trip reports and 153 passenger interviews were used to gather opinions about aspects which need to be improved in order to design a more comfortable aircraft interior. The results show clear relationships between comfort and legroom, hygiene, crew attention and seat/personal space. Passengers rate the newer planes significantly better than older ones, indicating that attention to design for comfort has proven effective. The study also shows that rude flight attendants and bad hygiene reduce the comfort experience drastically and that a high comfort rating is related to higher "fly again" values. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

11. Structural Acoustic Prediction and Interior Noise Control Technology

Science.gov (United States)

Mathur, G. P.; Chin, C. L.; Simpson, M. A.; Lee, J. T.; Palumbo, Daniel L. (Technical Monitor)

2001-01-01

This report documents the results of Task 14, "Structural Acoustic Prediction and Interior Noise Control Technology". The task was to evaluate the performance of tuned foam elements (termed Smart Foam) both analytically and experimentally. Results taken from a three-dimensional finite element model of an active, tuned foam element are presented. Measurements of sound absorption and sound transmission loss were taken using the model. These results agree well with published data. Experimental performance data were taken in Boeing's Interior Noise Test Facility where 12 smart foam elements were applied to a 757 sidewall. Several configurations were tested. Noise reductions of 5-10 dB were achieved over the 200-800 Hz bandwidth of the controller. Accelerometers mounted on the panel provided a good reference for the controller. Configurations with far-field error microphones outperformed near-field cases.

12. High Resolution 3D Radar Imaging of Comet Interiors

Science.gov (United States)

Asphaug, E. I.; Gim, Y.; Belton, M.; Brophy, J.; Weissman, P. R.; Heggy, E.

2012-12-01

13. The interactive optical fiber fabrics for smart interior environment

Science.gov (United States)

Bai, Z. Q.; Dong, A. H.; Du, Z. Y.; Tan, J.

2017-10-01

Comparing to conventional textiles, interactive photonic textiles can emit light, present different colors, change the surface pattern and can interact with users. They are particularly suitable for decorative purpose. Home furniture is one possible application [1]. With attractive illumination and color effect, the photonic textiles can also be used in hotels, exhibition halls, restaurants and many other circumstances to enhance the interior environment. However, the functionality of the interactive photonic textile for interior purpose is still underdeveloped, since there are still sever challenges about how to improve the usability and functionality of the interactive textile. This project aims to study how to improve the interactive function of photonic textiles, which can enhance the well-being of the end-user. In the end, a color-changeable interactive cushion which can detect the main primary particulate matter (PM) 2.5 was developed.

14. Aircraft Interior Noise Control Using Distributed Piezoelectric Actuators

Science.gov (United States)

Sun, Jian Q.

1996-01-01

Developing a control system that can reduce the noise and structural vibration at the same time is an important task. This talk presents one possible technical approach for accomplishing this task. The target application of the research is for aircraft interior noise control. The emphasis of the present approach is not on control strategies, but rather on the design of actuators for the control system. In the talk, a theory of distributed piezoelectric actuators is introduced. A uniform cylindrical shell is taken as a simplified model of fuselage structures to illustrate the effectiveness of the design theory. The actuators developed are such that they can reduce the tonal structural vibration and interior noise in a wide range of frequencies. Extensive computer simulations have been done to study various aspects of the design theory. Experiments have also been conducted and the test results strongly support the theoretical development.

15. Evaluation of piezoceramic actuators for control of aircraft interior noise

Science.gov (United States)

Silcox, Richard J.; Lefebvre, Sylvie; Metcalf, Vern L.; Beyer, Todd B.; Fuller, Chris R.

1992-01-01

Results of an experiment to evaluate piezoceramic actuators as the control actuator for active control of interior noise in a large-scale fuselage model are presented. Control was demonstrated for tonal excitation using a time domain least mean squares algorithm. A maximum of four actuator channels and six error signals were used. The actuators were employed for control of noise at frequencies where interior cavity modes were the dominant response and for driven acoustic responses where a structure resonance was dominant. Global reductions of 9 to 12 dB were obtained for the cases examined. The most effective configuration of skin-mounted actuators was found to be a pure in-plane forcing function as opposed to a bending excitation. The frame-mounted actuators were found to be equally effective as the skin-mounted actuators. However, both configurations resulted in local regions of unacceptably high vibration response in the structure.

16. Evaluation of physical-protection elements for interior applications

International Nuclear Information System (INIS)

Scott, S.H.

1983-01-01

Considerable emphasis has been given in recent years to the threat of sabotage by an insider at nuclear facilities. This threat is inherently different from the outsider threat of theft or sabotage because of the insiders' unique knowledge and access to vital material and equipment. Thus, special safeguards elements are needed in order to counter the insider threat. In addition, insider physical protection system elements must be compatible with the operations, safety, and maintenance programs at the facility. To help identify elements which meet these needs, field evaluations were performed on an interior access control system, piping sensors, interior video motion detectors, and valve monitoring devices. These elements were tested in a realistic operating environment and both technical and operational evaluation data were obtained. Safeguards element descriptions and the results of the operational tests and evaluations are outlined

17. Interior thermal insulation systems for historical building envelopes

Science.gov (United States)

Jerman, Miloš; Solař, Miloš; Černý, Robert

2017-11-01

The design specifics of interior thermal insulation systems applied for historical building envelopes are described. The vapor-tight systems and systems based on capillary thermal insulation materials are taken into account as two basic options differing in building-physical considerations. The possibilities of hygrothermal analysis of renovated historical envelopes including laboratory methods, computer simulation techniques, and in-situ tests are discussed. It is concluded that the application of computational models for hygrothermal assessment of interior thermal insulation systems should always be performed with a particular care. On one hand, they present a very effective tool for both service life assessment and possible planning of subsequent reconstructions. On the other, the hygrothermal analysis of any historical building can involve quite a few potential uncertainties which may affect negatively the accuracy of obtained results.

18. Approach to interior design for passive direct gain solar homes

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

In response to requests from buyers and builders of direct gain passive solar homes interior design criteria either specific to, or emphasized by, passive solar buildings are investigated. Problems of high sunlight penetration, secondary illumination, material selection, sound control and psychology are approached. Material deterioration, fading, glare, noise, and a sense of spacial confinement can be minimized, contributing to the appeal and saleability of passive solar homes.

19. Estimation of parameters of interior permanent magnet synchronous motors

International Nuclear Information System (INIS)

Hwang, C.C.; Chang, S.M.; Pan, C.T.; Chang, T.Y.

2002-01-01

This paper presents a magnetic circuit model to the estimation of machine parameters of an interior permanent magnet synchronous machine. It extends the earlier work of Hwang and Cho that focused mainly on the magnetic aspects of motor design. The proposed model used to calculate EMF, d- and q-axis reactances. These calculations are compared to those from finite element analysis and measurement with good agreement

20. Interior design criteria for successful hospital patient rooms

OpenAIRE

Bilir, Seda

1997-01-01

Ankara : The Department of Interior Architecture and Environmental Design and Institute of Fine Arts of Bilkent University, 1997. Thesis (Master's) -- Bilkent University, 1997. Includes bibliographical references leaves 94-99 In this study, the design requirements of hospital acute-care patient rooms, which support the recovery and well-being of the patients, are examined. Patients' psycho-spatial needs which may be complementary to the healing effects of the medical treatme...

1. Remote viewing of melter interior Defense Waste Processing Facility

International Nuclear Information System (INIS)

Heckendorn, F.M. II.

1986-01-01

A remote system has been developed and demonstrated for continuous reviewing of the interior of a glass melter, which is used to vitrify highly radioactive waste. The system is currently being implemented with the Defense Waste Processing Facility (DWPF) now under construction at the Savannah River Plant (SRP). The environment in which the borescope/TV unit is implemented combines high temperature, high ionizing radiation, low light, spattering, deposition, and remote maintenance

2. A post-Galileo view of Io's interior

Science.gov (United States)

Keszthelyi, L.; Jaeger, W.L.; Turtle, E.P.; Milazzo, M.; Radebaugh, J.

2004-01-01

We present a self-consistent model for the interior of Io, taking the recent Galileo data into account. In this model, Io has a completely molten core, substantially molten mantle, and a very cold lithosphere. Heat from magmatic activity can mobilize volatile compounds such as SO2 in the lithosphere, and the movement of such cryogenic fluids may be important in the formation of surface features including sapping scarps and paterae. ?? Published by Elsevier Inc.

3. Integration of Models of Building Interiors with Cadastral Data

OpenAIRE

Gotlib Dariusz; Karabin Marcin

2017-01-01

Demands for applications which use models of building interiors is growing and highly diversified. Those models are applied at the stage of designing and construction of a building, in applications which support real estate management, in navigation and marketing systems and, finally, in crisis management and security systems. They are created on the basis of different data: architectural and construction plans, both, in the analogue form, as well as CAD files, BIM data files, by means of las...

OpenAIRE

Mariana Wibowo, Inez Natalia Suteja

2016-01-01

Malang is one of the places nostalgia tourists by Dutchman. Design boutique hotel take building's dutch colonial. Boutique hotel having the characteristics of unique, historic, and fancy. Uniqueness boutique hotel ditonjolkan in the atmosphere hotel that looks homey with support 3star class hotel facilities. The concept of the basis of design with apply a style of design colonial into the interior of boutique hotel good with the material the wall, the floor, ceiling, column and the elements d...

5. The Neutron star Interior Composition Explorer (NICER): design and development

OpenAIRE

Gendreau, Keith C.; Arzoumanian, Zaven; Adkins, Phillip W.; Albert, Cheryl L.; Anders, John F.; Aylward, Andrew T.; Baker, Charles L.; Balsamo, Erin R.; Bamford, William A.; Benegalrao, Suyog S.; Berry, Daniel L.; Bhalwani, Shiraz; Black, J. Kevin; Blaurock, Carl; Bronke, Ginger M.

2016-01-01

During 2014 and 2015, NASA's Neutron star Interior Composition Explorer (NICER) mission proceeded successfully through Phase C, Design and Development. An X-ray (0.2-12 keV) astrophysics payload destined for the International Space Station, NICER is manifested for launch in early 2017 on the Commercial Resupply Services SpaceX-11 flight. Its scientific objectives are to investigate the internal structure, dynamics, and energetics of neutron stars, the densest objects in the universe. During P...

6. Redesain Interior Hotel Bisnis Dengan Konsep Minimalis Montana

OpenAIRE

2016-01-01

Pada era global ini bisnis perhotelan berkembang seiring dengan kemajuan sektor pariwisata dan bisnis. Kondisi ini tidak lepas dari mobilisasi yang dilakukan oleh manusia di seluruh dunia dari waktu ke waktu. Perkembangan bisnis yang pesat di kota besar seperti Surabaya membuat orang- orang berdatangan ke kota ini untuk berbisnis. Akibatnya, industri hotel berbasis bisnis bersaing ketat. Tema perancangan desain interior hotel bisnis ini ditentukan setelah melewati beberapa tahapan, seperti st...

7. Analysis of Subway Interior Noise at Peak Commuter Time.

Science.gov (United States)

Lee, Donguk; Kim, Gibbeum; Han, Woojae

2017-07-01

Although mass transit systems are convenient and efficient for urban people, little attention has been paid to the potential hearing hazard from their noise. The purpose of the current study was to measure and analyze levels of subway interior noise at peak commuter times and to provide information about commuters' daily dose of noise exposure. To measure the subway interior noise, nine subway lines inside Seoul (i.e., lines 1-9) and six lines surrounding the capital city area (i.e., Central, Bundang, Sinbundang, Incheon, Gyeongui, and Gyeongchun) were chosen. The noise was measured and recorded by a sound level meter for two-hour periods in the morning and evening. 1) In the LZeq analysis, the average noise level of all 15 lines was 72.78 dB; the maximum and minimum noise levels were 78.34 and 62.46 dB, respectively. The average noise level of the nine lines inside Seoul was 73.45 dB, which was 1.68-dB louder than that of the six lines surrounding the capital city area. 2) Based on the LZeq analysis of 33 measured frequencies, 12.5 Hz was the highest frequency and 20,000 Hz was the lowest. 3) There was no remarkable difference in the level of subway interior noise between morning and evening peak commuter times. We concluded that the level of subway interior noise was not loud enough for commuters to incur noise-induced hearing loss. Regardless, environmental noise control efforts in the subway system might be needed for commuters who take a subway every day.

8. SYSTEMS OF INTERIOR STYLING AND TRAINING OF SPECIALISTS

OpenAIRE

samatdinov Marat Orynbaevich; Chkunin Anatoliy Sergeevich; Ivanov Kazbek Kazbekovich; Rumyantsev Georgiy Borisovich

2016-01-01

Increasing the quality of construction works and heat insulation efficiency of building envelope as well as providing additional fire proof and acoustic comfort suppose the use of special construction systems provided with the whole complex of components — composite construction systems. Composite interior systems include structural solutions of dividing walls, floors, suspended ceilings, inner facing of walls and fireproof facing, as well as assembling technology of these constructions. The ...

9. Estimation of parameters of interior permanent magnet synchronous motors

CERN Document Server

Hwang, C C; Pan, C T; Chang, T Y

2002-01-01

This paper presents a magnetic circuit model to the estimation of machine parameters of an interior permanent magnet synchronous machine. It extends the earlier work of Hwang and Cho that focused mainly on the magnetic aspects of motor design. The proposed model used to calculate EMF, d- and q-axis reactances. These calculations are compared to those from finite element analysis and measurement with good agreement.

10. Perancangan Interior Sekolah Musik Surabaya Symphony Orchestra Di Surabaya

OpenAIRE

Grace Mulyono, Liliyana Tan IGN. Ardana

2016-01-01

Classical music has a lot of benefits that can make more optimal brain development. Surabaya Symphony Orchestra Music School is a place to facilitate society in Surabaya to learn classical music.Many activities that can support learning classical music has not been facilitated due to the limited area, and lack of interior on SSO create interest and learning music became blocked. In accordance with Dolce concept which means “to play sweetly”, the music school design is using bright colors with...

11. Exact interior solutions in 2 + 1-dimensional spacetime

Energy Technology Data Exchange (ETDEWEB)

Rahaman, Farook; Bhar, Piyali [Jadavpur University, Department of Mathematics, Kolkata, West Bengal (India); Biswas, Ritabrata [Indian Institute of Engineering Sceince and Technology Shibpur, Howrah, West Bengal (India); Usmani, A.A. [Aligarh Muslim University, Department of Physics, Aligarh, Uttar Pradesh (India)

2014-04-15

We provide a new class of exact solutions for the interior in 2 + 1-dimensional spacetime. The solutions obtained for the perfect fluid model both with and without cosmological constant (Λ) are found to be regular and singularity free. It assumes very simple analytical forms that help us to study the various physical properties of the configuration. Solutions without Λ are found to be physically acceptable. (orig.)

12. Interesting Interest Points

DEFF Research Database (Denmark)

Aanæs, Henrik; Dahl, Anders Lindbjerg; Pedersen, Kim Steenstrup

2012-01-01

on spatial invariance of interest points under changing acquisition parameters by measuring the spatial recall rate. The scope of this paper is to investigate the performance of a number of existing well-established interest point detection methods. Automatic performance evaluation of interest points is hard......Not all interest points are equally interesting. The most valuable interest points lead to optimal performance of the computer vision method in which they are employed. But a measure of this kind will be dependent on the chosen vision application. We propose a more general performance measure based...... position. The LED illumination provides the option for artificially relighting the scene from a range of light directions. This data set has given us the ability to systematically evaluate the performance of a number of interest point detectors. The highlights of the conclusions are that the fixed scale...

13. Penerapan Tipografi dalam Sistem Signage pada Interior Ruang Publik

Directory of Open Access Journals (Sweden)

Ulli Aulia Ruki

2014-10-01

Full Text Available Signage system is applied in interior public spaces with consideration to the basic of typography. The objective of signage system is to provide the user convenience in public spaces in order to reach destination while the user is in the building. The basic requirements for designing signage system are legibility and readability. There are still designers who are not aware about the importance of designing a signage system so that sometimes it is found only as decorative element. It is necessary to make the best use of the purpose of signage design, so an interior design should be more carefully in conducting research related to the application of signage system in public spaces. The applied typography has to be considered by its size, placement, colors, and materials to be used. This research used design thinking goal grid method that is suitable to examine the signage system in order to complete design objectives. Article focuses on how to design the signage system to accommodate information that was useful for the user in public space. At the end, there would be identified signage system’s function in interior public spaces as information, guidance, identification as well as safety regulation.

14. Evaluation of internal/external exposure from interior building materials

International Nuclear Information System (INIS)

Furuta, Etsuko; Morita-Murase, Yuko; Yoshizawa, Yukio

2008-01-01

15. Perkembangan Material Rotan dan Penggunaan di Dunia Desain Interior

Directory of Open Access Journals (Sweden)

Grace Hartanti

2012-10-01

Full Text Available For most Indonesia people, rattan had long been known, for personal use and trade.  It started from raw materials and semi-finished trades, and later it was developed  into the finished rattan product trade conducted by the wholesalers in Indonesia. In addition to the processing of rattan in Indonesia, the rattan finished-product trade has also been done widely.The trade agreement that has been made with foreign parties spur the contribution in increasing the state revenue which deserves to be taken into account. In this case, rattan application has grown in the world of Interior Design, for example as furniture and as interior accessories. The use of substitute materials, such as synthetic rattan, is now also widely used to fulfill high demand and product diversity.With the growing numbers of variants of rattan application in interior design field, a research based on qualitative research was applied. Article explores the process of research and rattan is expected to be the mediator in bringing local Indonesian culture to the global world competition. Thus, the state gait could be known more widely, and hopefully could help improving the welfare of Indonesian people into a better place.

16. Transient simulation in interior flow field of lobe pump

International Nuclear Information System (INIS)

Li, Y B; Sang, X H; Shen, H; Jia, K; Meng, Q W

2013-01-01

The subject of this paper is mainly focused on the development and control of the double folium and trifolium lobe pump profiles by using the principle of involute engagement and use CAD to get an accurate involute profile. We use the standard k-ε turbulence model and PISO algorithm based on CFD software FLUENT. The dynamic mesh and UDF technology is introduced to simulate the interior flow field inside a lobe pump, and the variation of interior flow field under the condition of the lobe rotating is analyzed. We also analyse the influence produced by the difference in lobes, and then reveal which lobe is best. The results show that dynamic variation of the interior flow field is easily obtained by dynamic mesh technology and the distribution of its pressure and velocity. Because of the small gaps existing between the rotors and pump case, the higher pressure area will flow into the lower area though the small gaps which cause the working area keep with higher pressure all the time. Both of the double folium and trifolium are existing the vortex during the rotting time and its position, size and shape changes all the time. The vortexes even disappear in a circle period and there are more vortexes in double folium lobe pump. The velocity and pressure pulsation of trifolium pump are lower than that of the double folium

17. Modelling of the inhomogeneous interior of polymer gels

International Nuclear Information System (INIS)

Shew, C-Y; Iwaki, Takafumi

2006-01-01

A simple model has been investigated to elucidate the mean squared displacement (MSD) of probe molecules in cross-linked polymer gels. In the model, we assume that numerous cavities distribute in the inhomogeneous interior of a gel, and probe molecules are confined within these cavities. The individual probe molecules trapped in a gel are treated as Brownian particles confined to a spherical harmonic potential. The harmonic potential is chosen to model the effective potential experienced by the probe particle in the cavity of a gel. Each field strength is corresponding to the characteristic of one type of effective cavity. Since the statistical distribution of different effective cavity sizes is unknown, several distribution functions are examined. Meanwhile, the calculated averaged MSDs are compared to the experimental data by Nisato et al (2000 Phys. Rev. E 61 2879). We find that the theoretical results of the MSD are sensitive to the shape of the distribution function. For low cross-linked gels, the best fit is obtained when the interior cavities of a gel follow a bimodal distribution. Such a result may be attributed to the presence of at least two distinct classes of cavity in gels. For high cross-linked gels, the cavities in the gel can be depicted by a single-modal uniform distribution function, suggesting that the range of cavity sizes becomes smaller. These results manifest the voids inside a gel, and the shape of distribution functions may provide the insight into the inhomogeneous interior of a gel

18. Optimization of actuator arrays for aircraft interior noise control

Science.gov (United States)

Cabell, R. H.; Lester, H. C.; Mathur, G. P.; Tran, B. N.

1993-01-01

A numerical procedure for grouping actuators in order to reduce the number of degrees of freedom in an active noise control system is evaluated using experimental data. Piezoceramic actuators for reducing aircraft interior noise are arranged into groups using a nonlinear optimization routine and clustering algorithm. An actuator group is created when two or more actuators are driven with the same control input. This procedure is suitable for active control applications where actuators are already mounted on a structure. The feasibility of this technique is demonstrated using measured data from the aft cabin of a Douglas DC-9 fuselage. The measured data include transfer functions between 34 piezoceramic actuators and 29 interior microphones and microphone responses due to the primary noise produced by external speakers. Control inputs for the grouped actuators were calculated so that a cost function, defined as a quadratic pressure term and a penalty term, was a minimum. The measured transfer functions and microphone responses are checked by comparing calculated noise reductions with measured noise reductions for four frequencies. The grouping procedure is then used to determine actuator groups that improve overall interior noise reductions by 5.3 to 15 dB, compared to the baseline experimental configuration.

19. Lake Habitat and Fish Surveys on Interior Alaska National Wildlife Refuges, 1984–1986

Data.gov (United States)

Department of the Interior — A large-scale lake study on Interior Alaska National Wildlife Refuges (NWR) was undertaken from 1984–1986. Six NWRs were surveyed (Innoko, Kanuti, Koyukuk, Nowitna,...

20. International style interior in the historical steam power plant in Žilina

Directory of Open Access Journals (Sweden)

Grúňová Zuzana

2016-01-01

Full Text Available The article deals with one of the examples of good interior design in Slovak functionalist architecture uncovered during recent restorational research (2016. It points out that even provincial, small but growing town, which Žilina in the northern Slovakia region was at that time, can be a place of high-quality implementation of aesthetically valuable and structurally developed architectural design. The high level of composition, choice of color scheme, quality of materials and attention to detail prove the fact, that the architect František Bednárik mastered to apply international style ideas also to a small extent reconstruction of the original steam power plant in Žilina.

1. Door recognition in cluttered building interiors using imagery and lidar data

Science.gov (United States)

Díaz-Vilariño, L.; Martínez-Sánchez, J.; Lagüela, S.; Armesto, J.; Khoshelham, K.

2014-06-01

Building indoors reconstruction is an active research topic due to the importance of the wide range of applications to which they can be subjected, from architecture and furniture design, to movies and video games editing, or even crime scene investigation. Among the constructive elements defining the inside of a building, doors are important entities in applications like routing and navigation, and their automated recognition is advantageous e.g. in case of large multi-storey buildings with many office rooms. The inherent complexity of the automation of the recognition process is increased by the presence of clutter and occlusions, difficult to avoid in indoor scenes. In this work, we present a pipeline of techniques used for the reconstruction and interpretation of building interiors using information acquired in the form of point clouds and images. The methodology goes in depth with door detection and labelling as either opened, closed or furniture (false positive)

2. Door recognition in cluttered building interiors using imagery and lidar data

Directory of Open Access Journals (Sweden)

L. Díaz-Vilariño

2014-06-01

Full Text Available Building indoors reconstruction is an active research topic due to the importance of the wide range of applications to which they can be subjected, from architecture and furniture design, to movies and video games editing, or even crime scene investigation. Among the constructive elements defining the inside of a building, doors are important entities in applications like routing and navigation, and their automated recognition is advantageous e.g. in case of large multi-storey buildings with many office rooms. The inherent complexity of the automation of the recognition process is increased by the presence of clutter and occlusions, difficult to avoid in indoor scenes. In this work, we present a pipeline of techniques used for the reconstruction and interpretation of building interiors using information acquired in the form of point clouds and images. The methodology goes in depth with door detection and labelling as either opened, closed or furniture (false positive

3. The Stellar Imager (SI) Project: Resolving Stellar Surfaces, Interiors, and Magnetic Activity

Science.gov (United States)

Carpenter, Kenneth G.; Schrijver, K.; Karovska, M.

2007-01-01

The Stellar Imager (SI) is a UV/Optical. Space-Based Interferometer designed to enable 0.1 milli-arcsec (mas) spectral imaging of stellar surfaces and, via asteroseismology, stellar interiors and of the Universe in general. The ultra-sharp images of SI will revolutionize our view of many dynamic astrophysical processes by transforming point sources into extended sources, and snapshots into evolving views. The science of SI focuses on the role of magnetism in the Universe, particularly on magnetic activity on the surfaces of stars like the Sun. Its prime goal is to enable long-term forecasting of solar activity and the space weather that it drives. SI will also revolutionize our understanding of the formation of planetary systems, of the habitability and climatology of distant planets, and of many magneto-hydrodynamically controlled processes in the Universe. In this paper we discuss the science goals, technology needs, and baseline design of the SI mission.

4. Dissipation at the angstrom scale: Probing the surface and interior of an enzyme

Science.gov (United States)

Alavi, Zahra; Zocchi, Giovanni

2018-05-01

Pursuing a materials science approach to understanding the deformability of enzymes, we introduce measurements of the phase of the mechanical response function within the nanorheology paradigm. Driven conformational motion of the enzyme is dissipative as characterized by the phase measurements. The dissipation originates both from the surface hydration layer and the interior of the molecule, probed by examining the effect of point mutations on the mechanics. We also document changes in the mechanics of the enzyme examined, guanylate kinase, upon binding its four substrates. GMP binding stiffens the molecule, ATP and ADP binding softens it, while there is no clear mechanical signature of GDP binding. A hyperactive two-Gly mutant is found to possibly trade specificity for speed. Global deformations of enzymes are shown to be dependent on both hydration layer and polypeptide chain dynamics.

5. Deep Interior: The first comprehensive geophysical investigation of an asteroid

Science.gov (United States)

Asphaug, E.; Belton, M.; Klaasen, K.; McFadden, L.; Ostro, S.; Safaeinili, A.; Scheeres, D.; Sunshine, J.; Yeomans, D.

Near-Earth Objects (NEOs) come closer to Earth than any other celestial body, and their compositions are represented on Earth by thousands of well-studied meteorites. Yet we understand neither their origin, evolution, nor their geophysical behavior. These secrets are locked up in their unexplored interiors. Goal 1 of the NASA Strategic Plan emphasizes the requirement to catalogue and understand NEOs down to 1 km diameter. Goal 4 urges us to understand natural processes at work in the low gravity environment. Goal 5 expresses the need to explore the solar system and to learn how planets originated and evolved. In response to the NASA Strategic Plan we are proposing a NASA Discovery mission whose primary science objective is to greatly advance the realization of these Goals by conducting the first investigation of the global geophysics of an asteroid. Radio reflection data from 5 km orbit about a 1 km NEO will provide a tomographic 3D image of electromagnetic properties. Mechanical properties will be examined in the simplest possible way, using explosions to initiate seismic cratering events and to expose diverse interior units for spectroscopic analysis. Deep Interior is the lowest-risk, lowest cost path towards attaining the required characterization of NEOs. It breaks new ground for future missions to asteroids and comets and facilitates the design of reliable NEO technologies. Our science goals are as follows, and the techniques (radio science, imaging, IR spectroscopy, active surface science) will be described at this meeting: Asteroid Interiors. Radio, gravity, and seismology experiments give a complete first picture of an asteroid's deep interior, resolving inclusions, voids and unit boundaries at ˜ 30 m scales, and determining global and regional mechanical properties. Surface Geophysics. Blast experiments explore the structure and mechanics of the upper meters, demonstrate microgravity cratering, trigger natural geomorphic events, and expose subsurface

6. A New Wave of Permafrost Warming in the Alaskan Interior?

Science.gov (United States)

Romanovsky, V. E.; Nicolsky, D.; Cable, W.; Kholodov, A. L.; Panda, S. K.

2017-12-01

The impact of climate warming on permafrost and the potential of climate feedbacks resulting from permafrost thawing have recently received a great deal of attention. Ground temperatures are a primary indicator of permafrost stability. Many of the research sites in our permafrost network are located along the North American Arctic Permafrost-Ecological Transect that spans all permafrost zones in Alaska. Most of the sites in Alaska show substantial warming of permafrost since the 1980s. The magnitude of warming has varied with location, but was typically from 0.5 to 3°C. However, this warming was not linear in time and not spatially uniform. In some regions this warming even may be reversed and a slight recent cooling of permafrost has been observed recently at some locations. The Interior of Alaska is one of such regions where a slight permafrost cooling was observed starting in the late 1990s that has continued through the 2000s and in the beginning of the 2010s. The cooling has followed the substantial increase in permafrost temperatures documented for the Interior during the 1980s and 1990s. Permafrost temperatures at 15 m depth increased here by 0.3 to 0.6°C between 1983 and 1996. In most locations they reached their maximum in the second half of the 1990s. Since then, the permafrost temperatures started to decrease slowly and by 2013 this decrease at some locations was as much as 0.3°C at 15 m depth. There are some indications that the warming trend in the Alaskan Interior permafrost resumed during the last four years. By 2016, new record highs for the entire period of measurements of permafrost temperatures at 15 m depth were recorded at several locations. The latest observed permafrost warming in the Interior was combined with higher than normal summer precipitations. This combination has triggered near-surface permafrost degradation in many locations with adverse consequences for the ground surface stability affecting ecosystems and infrastructure. In

7. Insert Tidal Here: Finding Stability of Galilean Satellite Interiors

Science.gov (United States)

Walker, M.; Bills, B. G.; Mitchell, J.; Rhoden, A.

2017-12-01

The tidal environment is often hypothesized as a cause of surface expression in the satellites of the outer solar system. In two notable cases, Io's volcanism is thought to be driven by tidal heating of its mantle while the shattered surface of Europa's ice shell is said to be generated by tidal stresses in that ice. Being adjacent moons of Jupiter, these satellites give us a unique opportunity to apply a single set of general coupled models at each body to predict how one model can predict the heat generation and flow, strain and stress states, and structural parameters for each body. We include the effects of interior evolution into the tidal environment in addition to an evolving orbit. We find that the interiors of Io and Europa will evolve, as a consequence of the heat transfer from interior to surface, and stable structural and heat flow conditions are found. Then as their orbits evolve, perturbed by the mutual interactions of the Laplace mean motion resonance, those conditions of structural and heat stability also change. In particular, we find that at current orbital conditions there is sufficient heat to completely melt Io models for which a convecting interior is capped by a conducting lid. This argues for the presence of a non dissipating (or barely dissipating) core below the mantle, which future Io structure models should include. For the Europa model at current orbit, we use a silicate interior under an ocean capped by a two layer ice; convecting below with a conducting surface. We find stability in heat and structure occurs when the lower ice melts and recedes until the shell is roughly 50km thick. We present a variety of plausible structures for these bodies, and track how the stability of those structures trend as the orbit (in particular the orbital eccentricity, mean motion, and obliquity) change. We show how the Love numbers, layer thicknesses, surface heat flow, and orbital parameters are all linked. For Europa, upcoming measurements from

8. Point defects in solids

International Nuclear Information System (INIS)

Anon.

1978-01-01

The principal properties of point defects are studied: thermodynamics, electronic structure, interactions with etended defects, production by irradiation. Some measuring methods are presented: atomic diffusion, spectroscopic methods, diffuse scattering of neutron and X rays, positron annihilation, molecular dynamics. Then points defects in various materials are investigated: ionic crystals, oxides, semiconductor materials, metals, intermetallic compounds, carbides, nitrides [fr

9. Indexing Moving Points

DEFF Research Database (Denmark)

Agarwal, Pankaj K.; Arge, Lars Allan; Erickson, Jeff

2003-01-01

We propose three indexing schemes for storing a set S of N points in the plane, each moving along a linear trajectory, so that any query of the following form can be answered quickly: Given a rectangle R and a real value t, report all K points of S that lie inside R at time t. We first present an...

10. Generalized zero point anomaly

International Nuclear Information System (INIS)

Nogueira, Jose Alexandre; Maia Junior, Adolfo

1994-01-01

It is defined Zero point Anomaly (ZPA) as the difference between the Effective Potential (EP) and the Zero point Energy (ZPE). It is shown, for a massive and interacting scalar field that, in very general conditions, the renormalized ZPA vanishes and then the renormalized EP and ZPE coincide. (author). 3 refs

11. Poisson branching point processes

International Nuclear Information System (INIS)

Matsuo, K.; Teich, M.C.; Saleh, B.E.A.

1984-01-01

We investigate the statistical properties of a special branching point process. The initial process is assumed to be a homogeneous Poisson point process (HPP). The initiating events at each branching stage are carried forward to the following stage. In addition, each initiating event independently contributes a nonstationary Poisson point process (whose rate is a specified function) located at that point. The additional contributions from all points of a given stage constitute a doubly stochastic Poisson point process (DSPP) whose rate is a filtered version of the initiating point process at that stage. The process studied is a generalization of a Poisson branching process in which random time delays are permitted in the generation of events. Particular attention is given to the limit in which the number of branching stages is infinite while the average number of added events per event of the previous stage is infinitesimal. In the special case when the branching is instantaneous this limit of continuous branching corresponds to the well-known Yule--Furry process with an initial Poisson population. The Poisson branching point process provides a useful description for many problems in various scientific disciplines, such as the behavior of electron multipliers, neutron chain reactions, and cosmic ray showers

12. The Lagrangian Points

Science.gov (United States)

Linton, J. Oliver

2017-01-01

There are five unique points in a star/planet system where a satellite can be placed whose orbital period is equal to that of the planet. Simple methods for calculating the positions of these points, or at least justifying their existence, are developed.

13. Content Analysis of Introductory Interior Design College Textbooks: A Study Revisited

Science.gov (United States)

Temple, Julie A.; Potthoff, Joy K.

2013-01-01

Introductory interior design texts adopted by design educators present information relevant to both historical and contemporary issues in interior design. According to one author, they provide a "survey of the field of interior design as it now exists" (Pile, 2007). A comparison of the content of contemporary texts with those of more…

14. 41 CFR 101-26.506 - Interior planning and design services.

Science.gov (United States)

2010-07-01

... SOURCES AND PROGRAM 26.5-GSA Procurement Programs § 101-26.506 Interior planning and design services. In... various phases of interior planning and design. These services will be provided either directly or through... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Interior planning and...

15. Residential Interior Design as Complex Composition: A Case Study of a High School Senior's Composing Process

Science.gov (United States)

Smagorinsky, Peter; Zoss, Michelle; Reed, Patty M.

2006-01-01

This research analyzed the composing processes of one high school student as she designed the interiors of homes for a course in interior design. Data included field notes, an interview with the teacher, artifacts from the class, and the focal student's concurrent and retrospective protocols in relation to her design of home interiors. The…

16. Manipulating the optical properties of symmetrically branched Au/Pd nanocrystals through interior design.

Science.gov (United States)

DeSantis, Christopher J; Skrabalak, Sara E

2014-05-25

Au/Pd octopods with hollow, cubic interiors and Oh symmetry were synthesized for the first time by etching core@shell Pd@Au/Pd octopods to selectively remove their Pd interiors. Integration of multiple architectural features - in this case branching symmetry, composition, and interior design - into one nanostructure provides design strategies to new plasmonic colloids.

17. Publication point indicators

DEFF Research Database (Denmark)

Elleby, Anita; Ingwersen, Peter

2010-01-01

; the Cumulated Publication Point Indicator (CPPI), which graphically illustrates the cumulated gain of obtained vs. ideal points, both seen as vectors; and the normalized Cumulated Publication Point Index (nCPPI) that represents the cumulated gain of publication success as index values, either graphically......The paper presents comparative analyses of two publication point systems, The Norwegian and the in-house system from the interdisciplinary Danish Institute of International Studies (DIIS), used as case in the study for publications published 2006, and compares central citation-based indicators...... with novel publication point indicators (PPIs) that are formalized and exemplified. Two diachronic citation windows are applied: 2006-07 and 2006-08. Web of Science (WoS) as well as Google Scholar (GS) are applied to observe the cite delay and citedness for the different document types published by DIIS...

18. Multispectral Image Feature Points

Directory of Open Access Journals (Sweden)

Cristhian Aguilera

2012-09-01

Full Text Available This paper presents a novel feature point descriptor for the multispectral image case: Far-Infrared and Visible Spectrum images. It allows matching interest points on images of the same scene but acquired in different spectral bands. Initially, points of interest are detected on both images through a SIFT-like based scale space representation. Then, these points are characterized using an Edge Oriented Histogram (EOH descriptor. Finally, points of interest from multispectral images are matched by finding nearest couples using the information from the descriptor. The provided experimental results and comparisons with similar methods show both the validity of the proposed approach as well as the improvements it offers with respect to the current state-of-the-art.

19. From Point Clouds to Definitions of Architectural Space

DEFF Research Database (Denmark)

Tamke, Martin; Blümel, Ina; Ochmann, Sebastian

2014-01-01

Regarding interior building topology as an important aspect in building design and management, several approaches to indoor point cloud structuring have been introduced recently. Apart from a high-level semantic segmentation of the formerly unstructured point clouds into stories and rooms...... possible applications of these approaches in architectural design and building management and comment on the possible benefits for the building profession. While contemporary practice of spatial arrangement is predominantly based on the manual iteration of spatial topologies, we show that the segmentation...

20. Nonconvergence to Saddle Boundary Points under Perturbed Reinforcement Learning

Science.gov (United States)

2012-12-07

of the ODE (12). Note that for some games not all stationary points of the ODE (12) are Nash equilibria. For example, if you consider the Typewriter ...B A 4, 4 2, 2 B 2, 2 3, 3 Table 1: The Typewriter Game. On the other hand, any stationary point in the interior of the probability simplex will... Typewriter Game of Table 1. We observe that it is possible for the process to converge to a pure strategy profile which is not a Nash equilibrium when Ri(α

1. Does a point lie inside a polygon

International Nuclear Information System (INIS)

Milgram, M.S.

1988-01-01

A superficially simple problem in computational geometry is that of determining whether a query point P lies in the interior of a polygon if it lies in the polygon's plane. Answering this question is often required when tracking particles in a Monte Carlo program; it is asked frequently and an efficient algorithm is crucial. Littlefield has recently rediscovered Shimrat's algorithm, while in separate works, Wooff, Preparata and Shamos and Mehlhorn, as well as Yamaguchi, give other algorithms. A practical algorithm answering this question when the polygon's plane is skewed in space is not immediately evident from most of these methods. Additionally, all but one fails when two sides extend to infinity (open polygons). In this paper the author review the above methods and present a new, efficient algorithm, valid for all convex polygons, open or closed, and topologically connected in n-dimensional space (n ≥ 2)

2. Do acupuncture points exist?

International Nuclear Information System (INIS)

Yan Xiaohui; Zhang Xinyi; Liu Chenglin; Dang, Ruishan; Huang Yuying; He Wei; Ding Guanghong

2009-01-01

We used synchrotron x-ray fluorescence analysis to probe the distribution of four chemical elements in and around acupuncture points, two located in the forearm and two in the lower leg. Three of the four acupuncture points showed significantly elevated concentrations of elements Ca, Fe, Cu and Zn in relation to levels in the surrounding tissue, with similar elevation ratios for Cu and Fe. The mapped distribution of these elements implies that each acupuncture point seems to be elliptical with the long axis along the meridian. (note)

3. Do acupuncture points exist?

Energy Technology Data Exchange (ETDEWEB)

Yan Xiaohui; Zhang Xinyi [Department of Physics, Surface Physics Laboratory (State Key Laboratory), and Synchrotron Radiation Research Center of Fudan University, Shanghai 200433 (China); Liu Chenglin [Physics Department of Yancheng Teachers' College, Yancheng 224002 (China); Dang, Ruishan [Second Military Medical University, Shanghai 200433 (China); Huang Yuying; He Wei [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100039 (China); Ding Guanghong [Shanghai Research Center of Acupuncture and Meridian, Pudong, Shanghai 201203 (China)

2009-05-07

We used synchrotron x-ray fluorescence analysis to probe the distribution of four chemical elements in and around acupuncture points, two located in the forearm and two in the lower leg. Three of the four acupuncture points showed significantly elevated concentrations of elements Ca, Fe, Cu and Zn in relation to levels in the surrounding tissue, with similar elevation ratios for Cu and Fe. The mapped distribution of these elements implies that each acupuncture point seems to be elliptical with the long axis along the meridian. (note)

4. The effect of the configuration and the interior design of a virtual weightless space station on human spatial orientation

Science.gov (United States)

Aoki, Hirofumi; Ohno, Ryuzo; Yamaguchi, Takao

2005-05-01

In a virtual weightless environment, subjects' orientation skills were studied to examine what kind of cognitive errors people make when they moved through the interior space of virtual space stations and what kind of visual information effectively decreases those errors. Subjects wearing a head-mounted display moved from one end to the other end in space station-like routes constructed of rectangular and cubical modules, and did Pointing and Modeling tasks. In Experiment 1, configurations of the routes were changed with such variables as the number of bends, the number of embedding planes, and the number of planes with respect to the body posture. The results indicated that spatial orientation ability was relevant to the variables and that orientational errors were explained by two causes. One of these was that the place, the direction, and the sequence of turns were incorrect. The other was that subjects did not recognize the rotation of the frame of reference, especially when they turned in pitch direction rather than in yaw. In Experiment 2, the effect of the interior design was examined by testing three design settings. Wall colors that showed the allocentric frame of reference and the different interior design of vertical and horizontal modules were effective; however, there was a limit to the effectiveness in complicated configurations.

5. Analysis of the Effect of Interior Nudging on Temperature and Precipitation Distributions of Multi-year Regional Climate Simulations

Science.gov (United States)

Nolte, C. G.; Otte, T. L.; Bowden, J. H.; Otte, M. J.

2010-12-01

There is disagreement in the regional climate modeling community as to the appropriateness of the use of internal nudging. Some investigators argue that the regional model should be minimally constrained and allowed to respond to regional-scale forcing, while others have noted that in the absence of interior nudging, significant large-scale discrepancies develop between the regional model solution and the driving coarse-scale fields. These discrepancies lead to reduced confidence in the ability of regional climate models to dynamically downscale global climate model simulations under climate change scenarios, and detract from the usability of the regional simulations for impact assessments. The advantages and limitations of interior nudging schemes for regional climate modeling are investigated in this study. Multi-year simulations using the WRF model driven by reanalysis data over the continental United States at 36km resolution are conducted using spectral nudging, grid point nudging, and for a base case without interior nudging. The means, distributions, and inter-annual variability of temperature and precipitation will be evaluated in comparison to regional analyses.

6. The effect of the configuration and the interior design of a virtual weightless space station on human spatial orientation.

Science.gov (United States)

Aoki, Hirofumi; Ohno, Ryuzo; Yamaguchi, Takao

2005-01-01

In a virtual weightless environment, subjects' orientation skills were studied to examine what kind of cognitive errors people make when they moved through the interior space of virtual space stations and what kind of visual information effectively decreases those errors. Subjects wearing a head-mounted display moved from one end to the other end in space station-like routes constructed of rectangular and cubical modules, and did Pointing and Modeling tasks. In Experiment 1, configurations of the routes were changed with such variables as the number of bends, the number of embedding planes, and the number of planes with respect to the body posture. The results indicated that spatial orientation ability was relevant to the variables and that orientational errors were explained by two causes. One of these was that the place, the direction, and the sequence of turns were incorrect. The other was that subjects did not recognize the rotation of the frame of reference, especially when they turned in pitch direction rather than in yaw. In Experiment 2, the effect of the interior design was examined by testing three design settings. Wall colors that showed the allocentric frame of reference and the different interior design of vertical and horizontal modules were effective; however, there was a limit to the effectiveness in complicated configurations. c2005 Published by Elsevier Ltd.

7. Deep Interior: Multiple-Rendezvous Prospecting of NEOs

Science.gov (United States)

Kakuda, R. Y.; Asphaug, E.; Belton, M. J. S.; Gulkis, S.; Huebner, W. F.

2000-10-01

This is an international multiple-rendezvous mission designed to prospect the deep interior and subsurface geophysical properties of diverse near-Earth objects, using reflection radar tomography, imaging, gravity, and explosions. What we learn will greatly influence future missions and guide strategies for the diversion, disruption, or utilization of potentially hazardous objects. Deep Interior. Low-frequency radar to determine internal variations of complex permittivity at resolutions approaching 20 m. Map inclusions or voids, fracture geometries, and compositional or structural boundaries. Subsurface. High-frequency radar to determine depth of regolith, existence and nature of cometary mantle, geology beneath and around craters, and subsurface expressions to surface geology. Topography and Geodesy. Stereogrammetric imaging with 1 m/pixel spatial resolution, supplemented by radar altimetry in shadowed regions, to determine detailed shape, volume, and spin state. Compare with radar sounding to learn how internal structure is manifested on the surface. Mass and Density. Total mass and lower moments of the internal mass distribution by mapping the exterior gravitational field. Look for mass concentrations. Surface microphysics and composition. Map color, albedo, and scattering properties of the surface over sunlit regions in six optical filters. Material properties. Deploy grenades to characterize the mechanics and dynamics of surface materials. Record 8 frame/sec, 20 cm/pixel videos of crater formation and ejecta dynamics, to enable simple and direct laboratory constraints on material density, cohesion and porosity. Dust. Look for dust lofted by surface waves propagating from the explosions, to constrain elastic properties and attenuation. Observe longer-term dynamics and optical properties of dust "atmosphere" generated by human activity. Cometary Activity. At comet 107P/Wilson-Harrington, look for expressions of past cometary activity, and for possible awakening

8. Marine Point Forecasts

Science.gov (United States)

will link to the zone forecast and then allow further zooming to the point of interest whereas on the Honolulu, HI Chicago, IL Northern Indiana, IN Lake Charles, LA New Orleans, LA Boston, MA Caribou, ME

9. Critical-point nuclei

International Nuclear Information System (INIS)

Clark, R.M.

2004-01-01

It has been suggested that a change of nuclear shape may be described in terms of a phase transition and that specific nuclei may lie close to the critical point of the transition. Analytical descriptions of such critical-point nuclei have been introduced recently and they are described briefly. The results of extensive searches for possible examples of critical-point behavior are presented. Alternative pictures, such as describing bands in the candidate nuclei using simple ΔK = 0 and ΔK = 2 rotational-coupling models, are discussed, and the limitations of the different approaches highlighted. A possible critical-point description of the transition from a vibrational to rotational pairing phase is suggested

10. National Wetlands Inventory Points

Data.gov (United States)

Minnesota Department of Natural Resources — Wetland point features (typically wetlands that are too small to be as area features at the data scale) mapped as part of the National Wetlands Inventory (NWI). The...

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset contains address points which represent physical address locations assigned by the Allegheny County addressing authority. Data is updated by County...

12. Iowa Geologic Sampling Points

Data.gov (United States)

Iowa State University GIS Support and Research Facility — Point locations of geologic samples/files in the IGS repository. Types of samples include well cuttings, outcrop samples, cores, drillers logs, measured sections,...

13. The effect of lighting exterior and interior design

OpenAIRE

2017-01-01

Light, whether natural or artificial is a very important element in interior and exterior design. It actually helps us to see color because color is visible to our eye because the substances of which was obtained reflect wavelengths of light. Light as an element of design influences other elements. It can make the space large or small, showy and bright or dark and unpleasant. Places that are well-lit with clean, clear light make the space seem larger, while the fading light and shadows ...

14. Development of assembly techniques for fire resistant aircraft interior panels

Science.gov (United States)

Lee, S. C. S.

1978-01-01

Ten NASA Type A fire resistant aircraft interior panels were fabricated and tested to develop assembly techniques. These techiques were used in the construction of a full scale lavatory test structure for flame propagation testing. The Type A panel is of sandwich construction consisting of Nomex honeycomb filled with quinone dioxime foam, and bismaleimide/glass face sheets bonded to the core with polyimide film adhesive. The materials selected and the assembly techniques developed for the lavatory test structure were designed for obtaining maximum fire containment with minimum smoke and toxic emission.

15. New model for the lunar interior to 250 km

International Nuclear Information System (INIS)

Piwinskii, A.J.; Duba, A.G.

1975-01-01

A new model for the structure of the lunar interior to about a 250-km depth is proposed. It is suggested that this region is composed of plagioclase-bearing rocks, and that the 65-km seismic discontinuity represents the appearance of garnet. A variety of rock types mainly composed of plagioclase, pyroxene, olivine and garnet is envisioned, with at least half of the outer 250 km of the moon made of plagioclase, which dominates the electrical conductivity. This model agrees with recent petrological and electrical conductivity results and does not violate velocity-depth profiles obtained from elastic-wave studies of lunar and terrestrial materials. (U.S.)

16. A subtractive approach to interior intrusion detection system design

International Nuclear Information System (INIS)

Sons, R.J.; Graham, R.H. Jr.

1986-01-01

This paper discusses the subtractive approach to interior intrusion detection system design which assumes that all sensors are viable candidates until they are subjected to the constraints imposed by a particular facility. The constraints are determined by a sequence of questions concerning parameters such as threat definition, facility description and operation, environment, assets to be protected, security system capabilities, and cost. As a result of the questioning, some sensors will be eliminated from the candidate list, and the ''best'' set of sensors for the facility will remain. This form of questioning could be incorporated into an expert system aiding future intrusion detection system designs

17. Development of fire resistant, nontoxic aircraft interior materials

Science.gov (United States)

Haley, G.; Silverman, B.; Tajima, Y.

1976-01-01

All available newly developed nonmetallic polymers were examined for possible usage in developing fire resistant, nontoxic nonmetallic parts or assemblies for aircraft interiors. Specifically, feasibility for the development of clear films for new decorative laminates, compression moldings, injection molded parts, thermoformed plastic parts, and flexible foams were given primary considerations. Preliminary data on the flame resistant characteristics of the materials were obtained. Preliminary toxicity data were generated from samples of materials submitted from the contractor. Preliminary data on the physical characteristics of various thermoplastic materials to be considered for either compression molded, injection molded, or thermoformed parts were obtained.

18. Analysis of Daylight Control in a Chateau Interior

Directory of Open Access Journals (Sweden)

Jitka Mohelníková

2018-05-01

Full Text Available Assessment of daylighting in the residential hall of a historical chateau is presented. The evaluation is based on both the daylight measurement and simulations. Illuminance levels in the interior were controlled in accordance with requirements for light exposition of light sensitive materials. Valuable paintings and claddings as well as wallpapers and furniture upholstery in the hall are extremely light sensitive and they need to be protected from light damage. The daylight measurements and simulations give an overview of daylight conditions in the annual profile for clear sky conditions and for different levels of window shadings.

19. Isolated Neutron Stars: From the Surface to the Interior

CERN Document Server

Zane, Silvia; Page, Dany

2007-01-01

This book collects the contributions presented at the conference Isolated Neutron Stars: From the Surface to the Interior, held in London in April 2006. Forty years after the discovery of radio pulsars it presents an up-to-date description of the new vision of isolated neutron stars that has emerged in recent years with the advance of multi-wavelength observations. The great variety of isolated neutron stars, from pulsars to magnetars, some of them discovered very recently and many of them not detectable in radio wavelengths, is amply covered by descriptions of recent observational results and presentations of the latest theoretical interpretation of these data.

20. Evaluations of fiber optic sensors for interior applications

Energy Technology Data Exchange (ETDEWEB)

Sandoval, M.W.; Malone, T.P.

1996-02-01

This report addresses the testing and evaluation of commercial fiber optic intrusion detection systems in interior applications. The applications include laying optical fiber cable above suspended ceilings to detect removal of ceiling tiles, embedding optical fibers inside a tamper or item monitoring blanket that could be placed over an asset, and installing optical fibers on a door to detect movement or penetration. Detection capability of the fiber optic sensors as well as nuisance and false alarm information were focused on during the evaluation. Fiber optic sensor processing, system components, and system setup are described.

1. Characterizing fixed points

Directory of Open Access Journals (Sweden)

Sanjo Zlobec

2017-04-01

Full Text Available A set of sufficient conditions which guarantee the existence of a point x⋆ such that f(x⋆ = x⋆ is called a "fixed point theorem". Many such theorems are named after well-known mathematicians and economists. Fixed point theorems are among most useful ones in applied mathematics, especially in economics and game theory. Particularly important theorem in these areas is Kakutani's fixed point theorem which ensures existence of fixed point for point-to-set mappings, e.g., [2, 3, 4]. John Nash developed and applied Kakutani's ideas to prove the existence of (what became known as "Nash equilibrium" for finite games with mixed strategies for any number of players. This work earned him a Nobel Prize in Economics that he shared with two mathematicians. Nash's life was dramatized in the movie "Beautiful Mind" in 2001. In this paper, we approach the system f(x = x differently. Instead of studying existence of its solutions our objective is to determine conditions which are both necessary and sufficient that an arbitrary point x⋆ is a fixed point, i.e., that it satisfies f(x⋆ = x⋆. The existence of solutions for continuous function f of the single variable is easy to establish using the Intermediate Value Theorem of Calculus. However, characterizing fixed points x⋆, i.e., providing answers to the question of finding both necessary and sufficient conditions for an arbitrary given x⋆ to satisfy f(x⋆ = x⋆, is not simple even for functions of the single variable. It is possible that constructive answers do not exist. Our objective is to find them. Our work may require some less familiar tools. One of these might be the "quadratic envelope characterization of zero-derivative point" recalled in the next section. The results are taken from the author's current research project "Studying the Essence of Fixed Points". They are believed to be original. The author has received several feedbacks on the preliminary report and on parts of the project

2. Photoacoustic Point Source

International Nuclear Information System (INIS)

Calasso, Irio G.; Craig, Walter; Diebold, Gerald J.

2001-01-01

We investigate the photoacoustic effect generated by heat deposition at a point in space in an inviscid fluid. Delta-function and long Gaussian optical pulses are used as sources in the wave equation for the displacement potential to determine the fluid motion. The linear sound-generation mechanism gives bipolar photoacoustic waves, whereas the nonlinear mechanism produces asymmetric tripolar waves. The salient features of the photoacoustic point source are that rapid heat deposition and nonlinear thermal expansion dominate the production of ultrasound

3. Unconventional Quantum Critical Points

OpenAIRE

Xu, Cenke

2012-01-01

In this paper we review the theory of unconventional quantum critical points that are beyond the Landau's paradigm. Three types of unconventional quantum critical points will be discussed: (1). The transition between topological order and semiclassical spin ordered phase; (2). The transition between topological order and valence bond solid phase; (3). The direct second order transition between different competing orders. We focus on the field theory and universality class of these unconventio...

4. SharePoint governance

OpenAIRE

Ali, Mudassar

2013-01-01

Masteroppgave i informasjons- og kommunikasjonsteknologi IKT590 2013 – Universitetet i Agder, Grimstad SharePoint is a web-based business collaboration platform from Microsoft which is very robust and dynamic in nature. The platform has been in the market for more than a decade and has been adapted by large number of organisations in the world. The platform has become larger in scale, richer in features and is improving consistently with every new version. However, SharePoint ...

5. A Warm-Started Homogeneous and Self-Dual Interior-Point Method for Linear Economic Model Predictive Control

DEFF Research Database (Denmark)

Sokoler, Leo Emil; Skajaa, Anders; Frison, Gianluca

2013-01-01

algorithm in MATLAB and its performance is analyzed based on a smart grid power management case study. Closed loop simulations show that 1) our algorithm is significantly faster than state-of-the-art IPMs based on sparse linear algebra routines, and 2) warm-starting reduces the number of iterations...

6. Optimisation of Oil Production in Two – Phase Flow Reservoir Using Simultaneous Method and Interior Point Optimiser

DEFF Research Database (Denmark)

Lerch, Dariusz Michal; Völcker, Carsten; Capolei, Andrea

2012-01-01

in the reservoir. A promising decrease of these remained resources can be provided by smart wells applying water injections to sustain satisfactory pressure level in the reservoir throughout the whole process of oil production. Basically to enhance secondary recovery of the remaining oil after drilling, water...... is injected at the injection wells of the down-hole pipes. This sustains the pressure in the reservoir and drives oil towards production wells. There are however, many factors contributing to the poor conventional secondary recovery methods e.g. strong surface tension, heterogeneity of the porous rock...... fields, or closed loop optimisation, can be used for optimising the reservoir performance in terms of net present value of oil recovery or another economic objective. In order to solve an optimal control problem we use a direct collocation method where we translate a continuous problem into a discrete...

7. On the many saddle points description of quantum black holes

Energy Technology Data Exchange (ETDEWEB)

Germani, Cristiano, E-mail: cristiano.germani@physik.uni-muenchen.de

2014-06-02

Considering two dimensional gravity coupled to a CFT, we show that a semiclassical black hole can be described in terms of two Liouville theories matched at the horizon. The black hole exterior corresponds to a space-like while the interior to a time-like Liouville theory. This matching automatically implies that a semiclassical black hole has an infinite entropy. The path integral description of the time-like Liouville theory (the Black Hole interior) is studied and it is found that the correlation functions of the coupled CFT-gravity system are dominated by two (complex) saddle points, even in the semiclassical limit. We argue that this system can be interpreted as two interacting Bose–Einstein condensates constructed out of two degenerate quantum states. In AdS/CFT context, the same system is mapped into two interacting strings intersecting inside a three-dimensional BTZ black hole.

8. Natural Preconditioning and Iterative Methods for Saddle Point Systems

KAUST Repository

Pestana, Jennifer

2015-01-01

© 2015 Society for Industrial and Applied Mathematics. The solution of quadratic or locally quadratic extremum problems subject to linear(ized) constraints gives rise to linear systems in saddle point form. This is true whether in the continuous or the discrete setting, so saddle point systems arising from the discretization of partial differential equation problems, such as those describing electromagnetic problems or incompressible flow, lead to equations with this structure, as do, for example, interior point methods and the sequential quadratic programming approach to nonlinear optimization. This survey concerns iterative solution methods for these problems and, in particular, shows how the problem formulation leads to natural preconditioners which guarantee a fast rate of convergence of the relevant iterative methods. These preconditioners are related to the original extremum problem and their effectiveness - in terms of rapidity of convergence - is established here via a proof of general bounds on the eigenvalues of the preconditioned saddle point matrix on which iteration convergence depends.

9. Monitoring Interior and Exterior Wall Inspections within a Virtual Environment

Directory of Open Access Journals (Sweden)

A. Z. Sampaio

2012-01-01

Full Text Available This paper describes two prototype applications based on the Virtual Reality (VR technology for use in maintenance planning of buildings. In a building, the paint coating applied to interior walls and the different types of materials applied to façades convey their aesthetic character and also perform an important function of protection. This a construction component which is exposed to agents of deterioration related to its use, needing the regular evaluation of its state of repair. The applications support the performance of such periodic inspections and the monitoring of interior and exterior wall maintenance, using the VR technology. Used during an inspection visit, the applications allow users to consult a database of irregularities, normally associated with the coating, classified by the most probable causes and by the recommended repair methodologies. In addition, a chromatic scale related to the degree of deterioration of the coating, defined as a function of the time between the dates of the application of the paint and the scheduled repainting, can be attributed to each element of coating monitored. This use of the VR technology allows inspections and the evaluation of the degree of wear and tear of materials to be carried out in a highly direct and intuitive manner.

10. An interior vessel viewing system for DIII-D

International Nuclear Information System (INIS)

Senior, R.

1989-11-01

It was anticipated that there could be damage to the interior walls of the vacuum vessel during operations of the DIII-D tokamak. A method of viewing the inside of the vessel from the outside was required, that would allow the interior walls to be inspected visually for damage and to locate any debris resulting from operations. A miniature closed circuit television color camera system was developed which could be inserted into one of several ports of the vessel during a 'clean' vent, i.e., vented to inert gas. The system has pan, tilt and zoom capability and carries its own lighting. The use of this system allows a quick assessment of the condition of the vessel to be made under 'clean' vent conditions. This precludes the need for the permit process and manned entry into the vessel which would allow air inside the vessel. A permanent record of the inspection can then be made on video tape. The design and configuration of this camera system is presented and its use as a diagnostic tool discussed. 2 refs., 5 figs

11. Competing Grain Boundary and Interior Deformation Mechanisms with Varying Sizes

Energy Technology Data Exchange (ETDEWEB)

Zhang, Wei [University of Tennessee (UT); Gao, Yanfei [ORNL; Nieh, T. G. [University of Tennessee, Knoxville (UTK)

2018-01-01

In typical coarse-grained alloys, the dominant plastic deformations are dislocation gliding or climbing, and material strengths can be tuned by dislocation interactions with grain boundaries, precipitates, solid solutions, and other defects. With the reduction of grain size, the increase of material strengths follows the classic Hall-Petch relationship up to nano-grained materials. Even at room temperatures, nano-grained materials exhibit strength softening, or called the inverse Hall-Petch effect, as grain boundary processes take over as the dominant deformation mechanisms. On the other hand, at elevated temperatures, grain boundary processes compete with grain interior deformation mechanisms over a wide range of the applied stress and grain sizes. This book chapter reviews and compares the rate equation model and the microstructure-based finite element simulations. The latter explicitly accounts for the grain boundary sliding, grain boundary diffusion and migration, as well as the grain interior dislocation creep. Therefore the explicit finite element method has clear advantages in problems where microstructural heterogeneities play a critical role, such as in the gradient microstructure in shot peening or weldment. Furthermore, combined with the Hall-Petch effect and its breakdown, the above competing processes help construct deformation mechanism maps by extending from the classic Frost-Ashby type to the ones with the dependence of grain size.

12. Integration of Models of Building Interiors with Cadastral Data

Directory of Open Access Journals (Sweden)

Gotlib Dariusz

2017-12-01

Full Text Available Demands for applications which use models of building interiors is growing and highly diversified. Those models are applied at the stage of designing and construction of a building, in applications which support real estate management, in navigation and marketing systems and, finally, in crisis management and security systems. They are created on the basis of different data: architectural and construction plans, both, in the analogue form, as well as CAD files, BIM data files, by means of laser scanning (TLS and conventional surveys. In this context the issue of searching solutions which would integrate the existing models and lead to elimination of data redundancy is becoming more important. The authors analysed the possible input- of cadastral data (legal extent of premises at the stage of the creation and updating different models of building’s interiors. The paper focuses on one issue - the way of describing the geometry of premises basing on the most popular source data, i.e. architectural and construction plans. However, the described rules may be considered as universal and also may be applied in practice concerned may be used during the process of creation and updating indoor models based on BIM dataset or laser scanning clouds

13. New initiative in studies of Earth's deep interior

Science.gov (United States)

Lay, Thorne

A multidisciplinary U.S. research community is undertaking a new coordinated effort to study the state and dynamics of the Earth's deep mantle and core. At an open meeting held at the Massachusetts Institute of Technology, Cambridge, from September 11 to 12, 1992, over 120 Earth scientists gathered to discuss this new program, which is an outgrowth of activity during the previous year by an ad hoc steering committee. The research program will be coordinated by a community-based scientific organization and supported through competitive research proposals submitted to the National Science Foundation with the aim of facilitating cooperative research projects cutting across traditional disciplinary and institutional boundaries.The new organization is the U.S. Studies of the Earth's Deep Interior (SEDI) Coordinating Committee. This committee will facilitate communication among the U.S. SEDI research community, federal funding agencies, the AGU Committee for Studies of the Earth's Interior (SEI), the Union SEDI Committee of the International Union of Geodesy and Geophysics, and the general public (Figure 1).

14. Magnetic Fields of Extrasolar Planets: Planetary Interiors and Habitability

Science.gov (United States)

Lazio, T. Joseph

2018-06-01

Ground-based observations showed that Jupiter's radio emission is linked to its planetary-scale magnetic field, and subsequent spacecraft observations have shown that most planets, and some moons, have or had a global magnetic field. Generated by internal dynamos, magnetic fields are one of the few remote sensing means of constraining the properties of planetary interiors. For the Earth, its magnetic field has been speculated to be partially responsible for its habitability, and knowledge of an extrasolar planet's magnetic field may be necessary to assess its habitability. The radio emission from Jupiter and other solar system planets is produced by an electron cyclotron maser, and detections of extrasolar planetary electron cyclotron masers will enable measurements of extrasolar planetary magnetic fields. Based on experience from the solar system, such observations will almost certainly require space-based observations, but they will also be guided by on-going and near-future ground-based observations.This work has benefited from the discussion and participants of the W. M. Keck Institute of Space Studies "Planetary Magnetic Fields: Planetary Interiors and Habitability" and content within a white paper submitted to the National Academy of Science Committee on Exoplanet Science Strategy. Part of this research was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration.

15. Corrected Statistical Energy Analysis Model for Car Interior Noise

Directory of Open Access Journals (Sweden)

A. Putra

2015-01-01

Full Text Available Statistical energy analysis (SEA is a well-known method to analyze the flow of acoustic and vibration energy in a complex structure. For an acoustic space where significant absorptive materials are present, direct field component from the sound source dominates the total sound field rather than a reverberant field, where the latter becomes the basis in constructing the conventional SEA model. Such environment can be found in a car interior and thus a corrected SEA model is proposed here to counter this situation. The model is developed by eliminating the direct field component from the total sound field and only the power after the first reflection is considered. A test car cabin was divided into two subsystems and by using a loudspeaker as a sound source, the power injection method in SEA was employed to obtain the corrected coupling loss factor and the damping loss factor from the corrected SEA model. These parameters were then used to predict the sound pressure level in the interior cabin using the injected input power from the engine. The results show satisfactory agreement with the directly measured SPL.

16. Intercambios convectivos en el interior de los edificios

Directory of Open Access Journals (Sweden)

Roset, J.

1987-12-01

Full Text Available Convection inside buildings is the main mechanism to explain heat transfer among its parts. The numerical model, we use in this work, is bidimensional with the heat flux in laminar regime. We simule different thermal conditions of a room with one of its walls having several non-uniform distributions of temperature. We obtain, for these configurations, the heat fluxes through the different parts of the wall and the final distribution of the temperatures inside the whole room.

La convección en el interior de los edificios es el principal mecanismo de transferencia de calor entre las partes de los mismos. El modelo numérico que se utiliza en este trabajo es bidimensional con el flujo de calor en régimen laminan Se simulan diferentes condiciones térmicas de un cerramiento con la hipótesis de que una de sus paredes es sometida a varias distribuciones de temperatura no uniformes. Se obtienen, para estas configuraciones, los flujos de calor en las distintas partes de la pared así como la distribución final de temperaturas en el interior de toda la habitación.

17. Integration of Models of Building Interiors with Cadastral Data

Science.gov (United States)

Gotlib, Dariusz; Karabin, Marcin

2017-12-01

Demands for applications which use models of building interiors is growing and highly diversified. Those models are applied at the stage of designing and construction of a building, in applications which support real estate management, in navigation and marketing systems and, finally, in crisis management and security systems. They are created on the basis of different data: architectural and construction plans, both, in the analogue form, as well as CAD files, BIM data files, by means of laser scanning (TLS) and conventional surveys. In this context the issue of searching solutions which would integrate the existing models and lead to elimination of data redundancy is becoming more important. The authors analysed the possible input- of cadastral data (legal extent of premises) at the stage of the creation and updating different models of building's interiors. The paper focuses on one issue - the way of describing the geometry of premises basing on the most popular source data, i.e. architectural and construction plans. However, the described rules may be considered as universal and also may be applied in practice concerned may be used during the process of creation and updating indoor models based on BIM dataset or laser scanning clouds

18. MUEBLES E INTERIORES EN CANET DE MAR 1890-1917

Directory of Open Access Journals (Sweden)

Vicente de la Fuente Bermúdez

2014-01-01

Full Text Available Entre 1900 y 1910 se produce un auge constructivo en Canet de Mar, población cercana a Barcelona. Reformas o construcciones de nueva planta integran las novedades técnicas, como el gas y después la electricidad; adaptándose a modas y nuevos estilos de vida. El primer edificio construido por Lluís Domènech i Montaner en Canet, en 1884, es el Ateneu. Pere Domènech Roura, su hijo, diseña en 1917, la Casa Serra Pujadas. Entre ambas construcciones se crean interiores decorados en mayor o menor medida con objetos Art Nouveau/Modernistas que conviven con muebles anteriores, reflejando tanto el gusto personal de las familias, como su pasado, con muebles heredados. Junto a las casas para pequeños fabricantes locales destacan los interiores creados por artistas de renombre, como Lluís Domènech i Montaner o Eduard Ferrés i Puig, para grandes fortunas como Ramon de Montaner o Ramir Busquets.

19. Formation of Oxides in the Interior of Friction Stir Welds

Science.gov (United States)

Schneider, Judy; Chen, Po; Nunes, Arthur C., Jr.

2016-01-01

In friction stir welding (FSWing) the actual solid state joining takes place between the faying surfaces which form the weld seam. Thus the seam trace is often investigated for clues when the strength of the weld is reduced. Aluminum and its alloys are known to form a native, protective oxide on the surface. If these native surface oxides are not sufficiently broken up during the FSW process, they are reported to remain in the FSW interior and weaken the bond strength. This type of weld defect has been referred to as a lazy "S", lazy "Z", joint line defect, kissing bond, or residual oxide defect. Usually these defects are mitigated by modification of the process parameters, such as increased tool rotation rate, which causes a finer breakup of the native oxide particles. This study proposes that there may be an alternative mechanism for formation of oxides found within the weld nugget. As the oxidation rate increases at elevated temperatures above 400ºC, it may be possible for enhanced oxidation to occur on the interior surfaces during the FSW process from entrained air entering the seam gap. Normally, FSWs of aluminum alloys are made without a purge gas and it is unknown how process parameters and initial fit up could affect a potential air path into the interior during the processing. In addition, variations in FSW parameters, such as the tool rotation, are known to have a strong influence on the FSW temperature which may affect the oxidation rate if internal surfaces are exposed to entrained air. A series of FSWs were made in 3 different thickness panels of AA2219 (0.95, 1.27 and 1.56 cm) at 2 different weld pitches. As the thickness of the panels increased, there was an increased tendency for a gap to form in advance of the weld tool. If sufficient air is able to enter the workpiece gap prior to consolidation, the weld temperature can increase the oxidation rate on the interior surfaces. These oxidation rates would also be accelerated in areas of localized

20. Deep Interior: Probing the Structure of Primitive Bodies

Science.gov (United States)

Asphaug, Erik; Scheeres, Daniel; Safaeinili, Ali

1. Publication point indicators

DEFF Research Database (Denmark)

Elleby, Anita; Ingwersen, Peter

2010-01-01

The paper presents comparative analyses of two publication point systems, The Norwegian and the in-house system from the interdiscplinary Danish Institute for International Studies (DIIS), used as case in the study for publications published 2006, and compares central citation-based indicators...... with novel publication point indicators (PPIs) that are formalized and exemplified. Two diachronic citation windows are applied: 2006-07 and 2006-08. Web of Science (WoS) as well as Google Scholar (GS) are applied to observe the cite delay and citedness for the different document types published by DIIS...... for all document types. Statistical significant correlations were only found between WoS and GS and the two publication point systems in between, respectively. The study demonstrates how the nCPPI can be applied to institutions as evaluation tools supplementary to JCI in various combinations...

2. A Systematic Approach to Identify Sources of Abnormal Interior Noise for a High-Speed Train

Directory of Open Access Journals (Sweden)

Jie Zhang

2018-01-01

Full Text Available A systematic approach to identify sources of abnormal interior noise occurring in a high-speed train is presented and applied in this paper to resolve a particular noise issue. This approach is developed based on a number of previous dealings with similar noise problems. The particular noise issue occurs in a Chinese high-speed train. It is measured that there is a difference of 7 dB(A in overall Sound Pressure Level (SPL between two nominally identical VIP cabins at 250 km/h. The systematic approach is applied to identify the root cause of the 7 dB(A difference. Well planned measurements are performed in both the VIP cabins. Sound pressure contributions, either in terms of frequency band or in terms of facing area, are analyzed. Order analysis is also carried out. Based on these analyses, it is found that the problematic frequency is the sleeper passing frequency of the train, and an area on the roof contributes the most. In order to determine what causes that area to be the main contributor without disassembling the structure of the roof, measured noise and vibration data for different train speeds are further analyzed. It is then reasoned that roof is the main contributor caused by sound pressure behind the panel. Up to this point, panels of the roof are removed, revealing that a hole of 300 cm2 for running cables is presented behind the red area without proper sound insulation. This study can provide a basis for abnormal interior noise analysis and control of high-speed trains.

3. Numerical simulation and optimized design of cased telescoped ammunition interior ballistic

Directory of Open Access Journals (Sweden)

Jia-gang Wang

2018-04-01

Full Text Available In order to achieve the optimized design of a cased telescoped ammunition (CTA interior ballistic design, a genetic algorithm was introduced into the optimal design of CTA interior ballistics with coupling the CTA interior ballistic model. Aiming at the interior ballistic characteristics of a CTA gun, the goal of CTA interior ballistic design is to obtain a projectile velocity as large as possible. The optimal design of CTA interior ballistic is carried out using a genetic algorithm by setting peak pressure, changing the chamber volume and gun powder charge density. A numerical simulation of interior ballistics based on a 35 mm CTA firing experimental scheme was conducted and then the genetic algorithm was used for numerical optimization. The projectile muzzle velocity of the optimized scheme is increased from 1168 m/s for the initial experimental scheme to 1182 m/s. Then four optimization schemes were obtained with several independent optimization processes. The schemes were compared with each other and the difference between these schemes is small. The peak pressure and muzzle velocity of these schemes are almost the same. The result shows that the genetic algorithm is effective in the optimal design of the CTA interior ballistics. This work will be lay the foundation for further CTA interior ballistic design. Keywords: Cased telescoped ammunition, Interior ballistics, Gunpowder, Optimization genetic algorithm

4. Indentations and Starting Points in Traveling Sales Tour Problems: Implications for Theory

Science.gov (United States)

MacGregor, James N.

2012-01-01

A complete, non-trivial, traveling sales tour problem contains at least one "indentation", where nodes in the interior of the point set are connected between two adjacent nodes on the boundary. Early research reported that human tours exhibited fewer such indentations than expected. A subsequent explanation proposed that this was because…

5. 77 FR 61632 - Final Environmental Impact Statement for Cattle Point Road Relocation, San Juan Island National...

Science.gov (United States)

2012-10-10

... Juan County, Washington AGENCY: National Park Service, Interior. ACTION: Notice of Availability of the... Service (NPS) and the Federal Highway Administration (FHWA), in cooperation with San Juan County... through the park for use by residents and visitors traveling to the east end of the Cattle Point peninsula...

6. An Investigation of Starting Point Preferences in Human Performance on Traveling Salesman Problems

Science.gov (United States)

MacGregor, James N.

2014-01-01

Previous studies have shown that people start traveling sales problem tours significantly more often from boundary than from interior nodes. There are a number of possible reasons for such a tendency: first, it may arise as a direct result of the processes involved in tour construction; second, boundary points may be perceptually more salient than…

7. New Novae snack point

CERN Document Server

2012-01-01

Located next to the car park by the flag poles, a few metres from the Main CERN Reception (building 33), a new snack point catered by Novae will open to the public on Wednesday 8 August. More information will be available in the next issue of the Bulletin!

8. [Clinical key points. Gonioscopy].

Science.gov (United States)

Hamard, P

2007-05-01

Gonioscopy should be performed in all patients with glaucoma or suspected of having glaucoma. Four points are systematically evaluated: the width of the angle, the degree of trabecular pigmentation, the iridotrabecular appositions or synechia, and the level of iris insertion and the shape of the peripheral iris profile.

9. ACS Zero Point Verification

Science.gov (United States)

Dolphin, Andrew

2005-07-01

The uncertainties in the photometric zero points create a fundamental limit to the accuracy of photometry. The current state of the ACS calibration is surprisingly poor, with zero point uncertainties of 0.03 magnitudes. The reason for this is that the ACS calibrations are based primarily on semi-emprical synthetic zero points and observations of fields too crowded for accurate ground-based photometry. I propose to remedy this problem by obtaining ACS images of the omega Cen standard field with all nine broadband ACS/WFC filters. This will permit the direct determination of the ACS zero points by comparison with excellent ground-based photometry, and should reduce their uncertainties to less than 0.01 magnitudes. A second benefit is that it will facilitate the comparison of the WFPC2 and ACS photometric systems, which will be important as WFPC2 is phased out and ACS becomes HST's primary imager. Finally, three of the filters will be repeated from my Cycle 12 observations, allowing for a measurement of any change in sensitivity.

10. Point Lepreau generating station

International Nuclear Information System (INIS)

Ganong, G.H.D.; Strang, A.E.; Gunter, G.E.; Thompson, T.S.

Point Lepreau-1 reactor is a 600 MWe generating station expected to be in service by October 1979. New Brunswick is suffering a 'catch up' phenomenon in load growth and needs to decrease dependence on foreign oil. The site is on salt water and extensive study has gone into corrosion control. Project management, financing and scheduling have unique aspects. (E.C.B.)

11. Least fixed points revisited

NARCIS (Netherlands)

J.W. de Bakker (Jaco)

1975-01-01

textabstractParameter mechanisms for recursive procedures are investigated. Contrary to the view of Manna et al., it is argued that both call-by-value and call-by-name mechanisms yield the least fixed points of the functionals determined by the bodies of the procedures concerned. These functionals

12. Point kinetics modeling

International Nuclear Information System (INIS)

Kimpland, R.H.

1996-01-01

A normalized form of the point kinetics equations, a prompt jump approximation, and the Nordheim-Fuchs model are used to model nuclear systems. Reactivity feedback mechanisms considered include volumetric expansion, thermal neutron temperature effect, Doppler effect and void formation. A sample problem of an excursion occurring in a plutonium solution accidentally formed in a glovebox is presented

13. A Primary Study on the Recording Method of Interior Decoration in Qing Dynasty - A Case Study of Interior Decoration of Jingfu Palace

Science.gov (United States)

Rong, X.; He, B.; Zhuang, L.

2017-08-01

The existing interior decoration of Qing Dynasty is the master of that of each dynasty, with its diversified forms and complicated functions. As early as 1920s, the Rehabilitation Committee of Qing court recorded the interior furnishing in the Forbidden City by using Chinese traditional documentary method. Today, along with the constantly updated techniques, the recording method for the current situation of interior decoration has gradually developed from two-dimensional drawings into digital and comprehensive record. However, the current research results are mostly limited to a single field. This paper takes the digital record and reproduction about the current situation of interior decoration in Jingfu Palace in the Forbidden City as an example. Through the use of photogrammetry, 3D laser scanning, virtual display and other technology and equipment at the forefront of architectural field, it makes qualitative and quantitative record about the interior decoration inside Jingfu Palace. By combing with the interpretation of historical documents, it restores the original design ideas hidden behind the current situation of interior decoration, so as to summarize the best recording and reproducing method of interior decoration of Qing Dynasty.

14. A Primary Study on the Recording Method of Interior Decoration in Qing Dynasty – A Case Study of Interior Decoration of Jingfu Palace

Directory of Open Access Journals (Sweden)

X. Rong

2017-08-01

Full Text Available The existing interior decoration of Qing Dynasty is the master of that of each dynasty, with its diversified forms and complicated functions. As early as 1920s, the Rehabilitation Committee of Qing court recorded the interior furnishing in the Forbidden City by using Chinese traditional documentary method. Today, along with the constantly updated techniques, the recording method for the current situation of interior decoration has gradually developed from two-dimensional drawings into digital and comprehensive record. However, the current research results are mostly limited to a single field. This paper takes the digital record and reproduction about the current situation of interior decoration in Jingfu Palace in the Forbidden City as an example. Through the use of photogrammetry, 3D laser scanning, virtual display and other technology and equipment at the forefront of architectural field, it makes qualitative and quantitative record about the interior decoration inside Jingfu Palace. By combing with the interpretation of historical documents, it restores the original design ideas hidden behind the current situation of interior decoration, so as to summarize the best recording and reproducing method of interior decoration of Qing Dynasty.

15. Thermal automobile interior model; Thermisches Pkw-Innenraum-Modell

Energy Technology Data Exchange (ETDEWEB)

Flieger, Bjoern; Streblow, Rita; Mueller, Dirk [RWTH Aachen (Germany). E.ON Energieforschungszentrum

2012-11-01

The energy demand of climate-control instruments is an increasingly important focus of study in the automobile industry. The ratio of the energy demand for the engine as opposed to that of other car components will greatly change in the future. Especially for electrical vehicles the auxiliary energy use is very critical because of the limited battery capacity. Thus, the aim of this research project is to investigate means of more efficiently using the available energy by maintaining comfort criteria for all passengers. To realize this, a simulation model of a car interior cabin is being developed with which conclusions can be drawn, under the given boundary conditions, about the air circulation and -states as well as about the resulting energy demand to evaluate the efficiency and the thermal comfort. (orig.)

16. Limited solubility of iron in the Sun's interior

International Nuclear Information System (INIS)

Pollock, E.L.; Alder, B.J.

1978-01-01

Stripped iron nuclei in a hydrogen plasma under central solar conditions, according to the classical Debye-Huckel model, would undergo phase separation for concentrations well below the cosmic abundance value. The higher concentration corrections, needed to characterise the iron-rich phase, lead to enhanced solubility for a simplified model where the electrons form a uniform background. Support for an iron-rich phase coalescing in the solar interior requires more accurate treatment of bound and partially bound electrons in such a mixture. The results of the Debye-Huckel model where the electrons are treated discretely and as a continuum, are reported here and support the possibility of phase separation. The physical cause of that phase separation is simply that the potential energy is lower in the separated phase than in the mixture because the local charge neutralisation is much better satisfied in the two separated phases. (author)

17. Fire-retardant decorative inks for aircraft interiors

Science.gov (United States)

Kourtides, D. A.; Nir, Z.; Mikroyannidis, J. A.

1985-01-01

Commercial and experimental fire retardants were screened as potential fire retardants for acrylic printing inks used on aircraft interior sandwich panels. The fire retardants are selected according to their physical properties and their thermostabilities. A criterion for selecting a more stable fire retardant is established. Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) are used to determine thermostabilities. Results show that the fire retardant formulations are more thermally stable than the acrylic ink control. It is determined that an ink formulation containing a brominated phenol and carboxy-terminated butadiene acrylonitrile which has been modified with a brominated polymeric additive (BPA), yields the highest limiting oxygen index (LOI) of all the compounds tested. All of the fire-retardant formulations have a higher oxygen index than the baseline acrylic ink.

18. Generalized multiscale finite element method. Symmetric interior penalty coupling

KAUST Repository

Efendiev, Yalchin R.; Galvis, Juan; Lazarov, Raytcho D.; Moon, M.; Sarkis, Marcus V.

2013-01-01

Motivated by applications to numerical simulations of flows in highly heterogeneous porous media, we develop multiscale finite element methods for second order elliptic equations. We discuss a multiscale model reduction technique in the framework of the discontinuous Galerkin finite element method. We propose two different finite element spaces on the coarse mesh. The first space is based on a local eigenvalue problem that uses an interior weighted L2-norm and a boundary weighted L2-norm for computing the "mass" matrix. The second choice is based on generation of a snapshot space and subsequent selection of a subspace of a reduced dimension. The approximation with these multiscale spaces is based on the discontinuous Galerkin finite element method framework. We investigate the stability and derive error estimates for the methods and further experimentally study their performance on a representative number of numerical examples. © 2013 Elsevier Inc.

19. Thermal Comfort-CFD maps for Architectural Interior Design

DEFF Research Database (Denmark)

Naboni, Emanuele; Lee, Daniel Sang-Hoon; Fabbri, Kristian

2017-01-01

opportunities of movable interior partitions (operated by the users) could be estimated, providing a new layer of information to the designer. The applicability of the thermal maps within an architectural design process is discussed adopting standard energy simulation comfort outputs as a reference......Within the context of nearly Zero-Energy Buildings, it is debated that the energy-centred notion of design, proposed by regulatory frames, needs to be combined with a further focus toward users’ comfort and delight. Accordingly, the underlying theory of the research is that designers should take...... responsibility for understanding the heat flows through the building parts and its spaces. A design, which is sensible to the micro-thermal conditions coexisting in a space, allows the inhabitants to control the building to their needs and desires: for instance, maximising the benefits of heat gain from the sun...

20. Exploratory shaft facility preliminary designs - Gulf Interior Region salt domes

International Nuclear Information System (INIS)

1983-09-01

The purpose of the Preliminary Design Report, Gulf Interior Region, is to provide a description of the preliminary design for an Exploratory Shaft Facility on the Richton Dome, Mississippi. This issue of the report describes the preliminary design for constructing the exploratory shaft using the Large Hole Drilling method of construction and outlines the preliminary design and estimates of probable construction cost. The Preliminary Design Report is prepared to complement and summarize other documents that comprise the design at the preliminary stage of completion, December 1982. Other design documents include drawings, cost estimates and schedules. The preliminary design drawing package, which includes the construction schedule drawing, depicts the descriptions in this report. For reference, a list of the drawing titles and corresponding numbers are included in the Appendix. The report is divided into three principal sections: Design Basis, Facility Description and Construction Cost Estimate

1. Generalized multiscale finite element method. Symmetric interior penalty coupling

KAUST Repository

Efendiev, Yalchin R.

2013-12-01

Motivated by applications to numerical simulations of flows in highly heterogeneous porous media, we develop multiscale finite element methods for second order elliptic equations. We discuss a multiscale model reduction technique in the framework of the discontinuous Galerkin finite element method. We propose two different finite element spaces on the coarse mesh. The first space is based on a local eigenvalue problem that uses an interior weighted L2-norm and a boundary weighted L2-norm for computing the "mass" matrix. The second choice is based on generation of a snapshot space and subsequent selection of a subspace of a reduced dimension. The approximation with these multiscale spaces is based on the discontinuous Galerkin finite element method framework. We investigate the stability and derive error estimates for the methods and further experimentally study their performance on a representative number of numerical examples. © 2013 Elsevier Inc.

2. Conference on Boundary and Interior Layers : Computational and Asymptotic Methods

CERN Document Server

Stynes, Martin; Zhang, Zhimin

2017-01-01

This volume collects papers associated with lectures that were presented at the BAIL 2016 conference, which was held from 14 to 19 August 2016 at Beijing Computational Science Research Center and Tsinghua University in Beijing, China. It showcases the variety and quality of current research into numerical and asymptotic methods for theoretical and practical problems whose solutions involve layer phenomena. The BAIL (Boundary And Interior Layers) conferences, held usually in even-numbered years, bring together mathematicians and engineers/physicists whose research involves layer phenomena, with the aim of promoting interaction between these often-separate disciplines. These layers appear as solutions of singularly perturbed differential equations of various types, and are common in physical problems, most notably in fluid dynamics. This book is of interest for current researchers from mathematics, engineering and physics whose work involves the accurate app roximation of solutions of singularly perturbed diffe...

3. System Cost Analysis for an Interior Permanent Magnet Motor

Energy Technology Data Exchange (ETDEWEB)

Peter Campbell

2008-08-01

The objective of this program is to provide an assessment of the cost structure for an interior permanent magnet ('IPM') motor which is designed to meet the 2010 FreedomCAR specification. The program is to evaluate the range of viable permanent magnet materials for an IPM motor, including sintered and bonded grades of rare earth magnets. The study considers the benefits of key processing steps, alternative magnet shapes and their assembly methods into the rotor (including magnetization), and any mechanical stress or temperature limits. The motor's costs are estimated for an annual production quantity of 200,000 units, and are broken out into such major components as magnetic raw materials, processing and manufacturing. But this is essentially a feasibility study of the motor's electromagnetic design, and is not intended to include mechanical or thermal studies as would be done to work up a selected design for production.

4. Spectral analysis methods for vehicle interior vibro-acoustics identification

Science.gov (United States)

2009-02-01

Noise has various effects on comfort, performance and health of human. Sound are analysed by human brain based on the frequencies and amplitudes. In a dynamic system, transmission of sound and vibrations depend on frequency and direction of the input motion and characteristics of the output. It is imperative that automotive manufacturers invest a lot of effort and money to improve and enhance the vibro-acoustics performance of their products. The enhancement effort may be very difficult and time-consuming if one relies only on 'trial and error' method without prior knowledge about the sources itself. Complex noise inside a vehicle cabin originated from various sources and travel through many pathways. First stage of sound quality refinement is to find the source. It is vital for automotive engineers to identify the dominant noise sources such as engine noise, exhaust noise and noise due to vibration transmission inside of vehicle. The purpose of this paper is to find the vibro-acoustical sources of noise in a passenger vehicle compartment. The implementation of spectral analysis method is much faster than the 'trial and error' methods in which, parts should be separated to measure the transfer functions. Also by using spectral analysis method, signals can be recorded in real operational conditions which conduce to more consistent results. A multi-channel analyser is utilised to measure and record the vibro-acoustical signals. Computational algorithms are also employed to identify contribution of various sources towards the measured interior signal. These achievements can be utilised to detect, control and optimise interior noise performance of road transport vehicles.

5. Composite Match Index with Application of Interior Deformation Field Measurement from Magnetic Resonance Volumetric Images of Human Tissues

Directory of Open Access Journals (Sweden)

Penglin Zhang

2012-01-01

Full Text Available Whereas a variety of different feature-point matching approaches have been reported in computer vision, few feature-point matching approaches employed in images from nonrigid, nonuniform human tissues have been reported. The present work is concerned with interior deformation field measurement of complex human tissues from three-dimensional magnetic resonance (MR volumetric images. To improve the reliability of matching results, this paper proposes composite match index (CMI as the foundation of multimethod fusion methods to increase the reliability of these various methods. Thereinto, we discuss the definition, components, and weight determination of CMI. To test the validity of the proposed approach, it is applied to actual MR volumetric images obtained from a volunteer’s calf. The main result is consistent with the actual condition.

6. Melting point of yttria

International Nuclear Information System (INIS)

Skaggs, S.R.

1977-06-01

Fourteen samples of 99.999 percent Y 2 O 3 were melted near the focus of a 250-W CO 2 laser. The average value of the observed melting point along the solid-liquid interface was 2462 +- 19 0 C. Several of these same samples were then melted in ultrahigh-purity oxygen, nitrogen, helium, or argon and in water vapor. No change in the observed temperature was detected, with the exception of a 20 0 C increase in temperature from air to helium gas. Post test examination of the sample characteristics, clarity, sphericity, and density is presented, along with composition. It is suggested that yttria is superior to alumina as a secondary melting-point standard

International Nuclear Information System (INIS)

Gay, T.J.; Hale, E.B.; Irby, V.D.; Olson, R.E.; Missouri Univ., Rolla; Berry, H.G.

1988-01-01

We have studied the ionization of rare gases by protons at intermediate energies, i.e., energies at which the velocities of the proton and the target-gas valence electrons are comparable. A significant channel for electron production in the forward direction is shown to be 'saddle-point' ionization, in which electrons are stranded on or near the saddle-point of electric potential between the receding projectile and the ionized target. Such electrons yield characteristic energy spectra, and contribute significantly to forward-electron-production cross sections. Classical trajectory Monte Carlo calculations are found to provide qualitative agreement with our measurements and the earlier measurements of Rudd and coworkers, and reproduce, in detail, the features of the general ionization spectra. (orig.)

8. Measure Guideline: Deep Energy Enclosure Retrofit for Interior Insulation of Masonry Walls

Energy Technology Data Exchange (ETDEWEB)

Musunuru, S. [Building Science Corporation, Westford, MA (United States); Pettit, B. [Building Science Corporation, Westford, MA (United States)

2015-04-01

This Measure Guideline describes a deep energy enclosure retrofit (DEER) solution for insulating mass masonry buildings from the interior. It describes the retrofit assembly, technical details, and installation sequence for retrofitting masonry walls. Interior insulation of masonry retrofits has the potential to adversely affect the durability of the wall; this document includes a review of decision criteria pertinent to retrofitting masonry walls from the interior and the possible risk of freeze-thaw damage.

9. Perwujudan Brand Image Dalam Penataan Interior Rotelli Shoes Di Galaxy Mall

OpenAIRE

Sriti Mayang Sari, Maria Sulistya C

2013-01-01

Nowadays the economic developmentis increasing in Surabaya. This has a positive impact on retail companies in Surabaya. In order to remain competitive shop among many other stores, they need a unique interior design, comfortable and functional that can attract customers to shop. An attractive interior design alone is not enough, however they need an interior design that canreflect the image and strategies.Rotelli is one of the famous shoesbrand from Italy and has a vision to be a trendsetter ...

10. Investigation of the interior of Mercury through the study of its gravity, topography, and tidal response

OpenAIRE

2014-01-01

With the goal of furthering our understanding of the interior structure of Mercury, this work tries to answer the following two questions. What can the response of the planet to solar tides reveal about the interior structure? What is the thickness of the crust and what are the implications for the interior?By comparing the models developed here for the tidal response of Mercury with the response measured by the MErcury Surface Space ENvironment GEochemistry and Ranging spacecraft (MESSENGER)...

11. Using BIM Technology to Optimize the Traditional Interior Design Work Mode

Science.gov (United States)

Zhu, Ning Ke

2018-06-01

the development of BIM technology and application in the field of architecture design has produced results, but BIM technology and application in the field of interior design is still immaturity because of construction and decoration engineering separation. The article analyzes the problems that BIM technology lead to the interior design work mode optimization, from the 3D visualization work environment, real-time collaborative design mode, physical analysis design mode, information integration design mode state the application in interior design.

12. Measure Guideline. Deep Energy Enclosure Retrofit for Interior Insulation of Masonry Walls

Energy Technology Data Exchange (ETDEWEB)

Musunuru, S. [Building Science Corporation, Westford, MA (United States); Pettit, B. [Building Science Corporation, Westford, MA (United States)

2015-04-30

This Measure Guideline describes a deep energy enclosure retrofit solution for insulating mass masonry buildings from the interior. It describes the retrofit assembly, technical details, and installation sequence for retrofitting masonry walls. Interior insulation of masonry retrofits might adversely affect the durability of the wall. This guideline includes a review of decision criteria pertinent to retrofitting masonry walls from the interior and the possible risk of freeze-thaw damage.

13. Insectivorous Birds and Environmental Factors Across an Edge-Interior Gradient in Tropical Rainforest of Malaysia

OpenAIRE

Abdullah B. Mohd; Mohamed Zakaria; Hossein Varasteh Moradi; Ebil Yusof

2009-01-01

The study objectives were to test: (1) the effects of the edge-interior gradient on understorey insectivorous bird abundance, density and diversity; (2) effects of environmental variables along an edge-interior gradient at population level (i.e., on each sub-guilds and species abundance); (3) possible effects of environmental structure along an edge-interior gradient at community level (i.e., species richness, diversity and total abundance). Fifteen hundred and four birds belonging to ...

14. Thermodynamic Effects of Replacements of Pro Residues in Helix Interiors of Maltose-Binding Protein

OpenAIRE

2003-01-01

Introduction of Pro residues into helix interiors results in protein destabilization. It is currently unclear if the converse substitution (i.e., replacement of Pro residues that naturally occur in helix interiors would be stabilizing). Maltose-binding protein is a large 370-amino acid protein that contains 21 Pro residues. Of these, three nonconserved residues (P48, P133, and P159) occur at helix interiors. Each of the residues was replaced with Ala and Ser. Stabilities were characterized by...

15. High boiling point hydrocarbons

Energy Technology Data Exchange (ETDEWEB)

Pier, M

1929-04-29

A process is given for the production of hydrocarbons of high boiling point, such as lubricating oils, from bituminous substances, such as varieties of coal, shale, or other solid distillable carbonaceous materials. The process consists of treating the initial materials with organic solvents and then subjecting the products extracted from the initial materials, preferably directly, to a reducing treatment in respect to temperature, pressure, and time. The reduction treatment is performed by means of hydrogen under pressure.

16. Critical point predication device

International Nuclear Information System (INIS)

Matsumura, Kazuhiko; Kariyama, Koji.

1996-01-01

An operation for predicting a critical point by using a existent reverse multiplication method has been complicated, and an effective multiplication factor could not be plotted directly to degrade the accuracy for the prediction. The present invention comprises a detector counting memory section for memorizing the counting sent from a power detector which monitors the reactor power, a reverse multiplication factor calculation section for calculating the reverse multiplication factor based on initial countings and current countings of the power detector, and a critical point prediction section for predicting the criticality by the reverse multiplication method relative to effective multiplication factors corresponding to the state of the reactor core previously determined depending on the cases. In addition, a reactor core characteristic calculation section is added for analyzing an effective multiplication factor depending on the state of the reactor core. Then, if the margin up to the criticality is reduced to lower than a predetermined value during critical operation, an alarm is generated to stop the critical operation when generation of a period of more than a predetermined value predicted by succeeding critical operation. With such procedures, forecasting for the critical point can be easily predicted upon critical operation to greatly mitigate an operator's burden and improve handling for the operation. (N.H.)

17. At the Tipping Point

Energy Technology Data Exchange (ETDEWEB)

Wiley, H. S.

2011-02-28

There comes a time in every field of science when things suddenly change. While it might not be immediately apparent that things are different, a tipping point has occurred. Biology is now at such a point. The reason is the introduction of high-throughput genomics-based technologies. I am not talking about the consequences of the sequencing of the human genome (and every other genome within reach). The change is due to new technologies that generate an enormous amount of data about the molecular composition of cells. These include proteomics, transcriptional profiling by sequencing, and the ability to globally measure microRNAs and post-translational modifications of proteins. These mountains of digital data can be mapped to a common frame of reference: the organism’s genome. With the new high-throughput technologies, we can generate tens of thousands of data points from each sample. Data are now measured in terabytes and the time necessary to analyze data can now require years. Obviously, we can’t wait to interpret the data fully before the next experiment. In fact, we might never be able to even look at all of it, much less understand it. This volume of data requires sophisticated computational and statistical methods for its analysis and is forcing biologists to approach data interpretation as a collaborative venture.

18. Maximum power point tracking

International Nuclear Information System (INIS)

Enslin, J.H.R.

1990-01-01

A well engineered renewable remote energy system, utilizing the principal of Maximum Power Point Tracking can be m ore cost effective, has a higher reliability and can improve the quality of life in remote areas. This paper reports that a high-efficient power electronic converter, for converting the output voltage of a solar panel, or wind generator, to the required DC battery bus voltage has been realized. The converter is controlled to track the maximum power point of the input source under varying input and output parameters. Maximum power point tracking for relative small systems is achieved by maximization of the output current in a battery charging regulator, using an optimized hill-climbing, inexpensive microprocessor based algorithm. Through practical field measurements it is shown that a minimum input source saving of 15% on 3-5 kWh/day systems can easily be achieved. A total cost saving of at least 10-15% on the capital cost of these systems are achievable for relative small rating Remote Area Power Supply systems. The advantages at larger temperature variations and larger power rated systems are much higher. Other advantages include optimal sizing and system monitor and control

19. A direct observation the asteroid's structure from deep interior to regolith: why and how do it?

Science.gov (United States)

Herique, A.; Kofman, W. W.

2013-12-01

The internal structure of asteroids is still poorly known and has never been measured directly. Our knowledge is relying entirely on inferences from remote sensing observations of the surface, and theoretical modeling. Is the body a monolithic piece of rock or a rubble-pile, an aggregate of boulders held together by gravity and how much porosity it contains, both in the form of micro-scale or macro-scale porosity? What is the typical size of the constituent blocs? Are these blocs homogeneous or heterogeneous? Is the body a defunct or dormant comet and such MBC can become active? The body is covered by a regolith from whose properties remains largely unknown in term of depth, size distribution and spatial variation. Is resulting from fine particles re-accretion or from thermal fracturing? What are its coherent forces? How to model is thermal conductivity while this parameter is so important to estimate Yarkowsky and Yorp effects? Knowing asteroid deep interior and regolith structure is a key point for a better understanding of the asteroid accretion and dynamical evolution. There is no way to determine this from ground-based observation. Radar operating from a spacecraft is the only technique capable of achieving this science objective of characterizing the internal structure and heterogeneity from submetric to global scale for the science benefit as well as for the planetary defence and human exploration. The deep interior structure tomography requires low-frequency radar to penetrate throughout the complete body. The radar wave propagation delay and the received power are related to the complex dielectric permittivity (i.e to the composition and microporosity) and the small scale heterogeneities (scattering losses) while the spatial variation of the signal and the multiple paths provide information on the presence of heterogeneities (variations in composition or porosity), layers, ice lens. A partial coverage will provide "cuts" of the body when a dense coverage

20. Optimal 25-Point Finite-Difference Subgridding Techniques for the 2D Helmholtz Equation

Directory of Open Access Journals (Sweden)

Tingting Wu

2016-01-01

Full Text Available We present an optimal 25-point finite-difference subgridding scheme for solving the 2D Helmholtz equation with perfectly matched layer (PML. This scheme is second order in accuracy and pointwise consistent with the equation. Subgrids are used to discretize the computational domain, including the interior domain and the PML. For the transitional node in the interior domain, the finite difference equation is formulated with ghost nodes, and its weight parameters are chosen by a refined choice strategy based on minimizing the numerical dispersion. Numerical experiments are given to illustrate that the newly proposed schemes can produce highly accurate seismic modeling results with enhanced efficiency.

1. Quantifying the Effects of Spatial Uncertainty in Fracture Permeability on CO2 Leakage through Columbia River Basalt Flow Interiors

Science.gov (United States)

Gierzynski, A.; Pollyea, R.

2016-12-01

Recent studies suggest that continental flood basalts may be suitable for geologic carbon sequestration, due to fluid-rock reactions that mineralize injected CO2 on relatively short time-scales. Flood basalts also possess a morphological structure conducive to injection, with alternating high-permeability (flow margin) and low-permeability (flow interior) layers. However, little information exists on the behavior of CO2 migration within field-scale fracture networks, particularly within flow interiors and at conditions near the critical point for CO2. In this study, numerical simulation is used to investigate the influence of fracture permeability uncertainty during gravity-driven CO2 migration within a jointed basalt flow interior as CO2 undergoes phase change from supercritical fluid to a subcritical phase. The model domain comprises a 2D fracture network mapped with terrestrial LiDAR scans of Columbia River Basalt acquired near Starbuck, WA. The model domain is 5 m × 5 m with bimodal heterogeneity (fracture and matrix), and initial conditions corresponding to a hydrostatic pressure gradient between 750 and 755 m depth. Under these conditions, the critical point for CO2 occurs 1.5 m above the bottom of the domain. For this model scenario, CO2 enters the base of the fracture network at 0.5 MPa overpressure, and matrix permeability is assumed constant. Fracture permeability follows a lognormal distribution on the basis of fracture aperture values from literature. In order to account for spatial uncertainty, the lognormal fracture permeability distribution is randomly located in the model domain and CO2 migration is simulated within the same fracture network for 50 equally probable realizations. Model results suggest that fracture connectivity, which is independent of permeability distribution, governs the path taken by buoyant CO2 as it rises through the flow interior; however, the permeability distribution strongly governs the CO2 flux magnitude. In particular

2. Vernal Point and Anthropocene

Science.gov (United States)

Chavez-Campos, Teodosio; Chavez S, Nadia; Chavez-Sumarriva, Israel

2014-05-01

The time scale was based on the internationally recognized formal chronostratigraphical /geochronological subdivisions of time: The Phanerozoic Eonathem/Eon; the Cenozoic Erathem/Era; the Quaternary System/Period; the Pleistocene and Holocene Series/Epoch. The Quaternary was divided into: (1) The Pleistocene that was characterized by cycles of glaciations (intervals between 40,000 and 100,000 years). (2) The Holocene that was an interglacial period that began about 12,000 years ago. It was believed that the Milankovitch cycles (eccentricity, axial tilt and the precession of the equinoxes) were responsible for the glacial and interglacial Holocene periods. The magnetostratigraphic units have been widely used for global correlations valid for Quaternary. The gravitational influence of the sun and moon on the equatorial bulges of the mantle of the rotating earth causes the precession of the earth. The retrograde motion of the vernal point through the zodiacal band is 26,000 years. The Vernal point passes through each constellation in an average of 2000 years and this period of time was correlated to Bond events that were North Atlantic climate fluctuations occurring every ≡1,470 ± 500 years throughout the Holocene. The vernal point retrogrades one precessional degree approximately in 72 years (Gleissberg-cycle) and approximately enters into the Aquarius constellation on March 20, 1940. On earth this entry was verify through: a) stability of the magnetic equator in the south central zone of Peru and in the north zone of Bolivia, b) the greater intensity of equatorial electrojet (EEJ) in Peru and Bolivia since 1940. With the completion of the Holocene and the beginning of the Anthropocene (widely popularized by Paul Crutzen) it was proposed the date of March 20, 1940 as the beginning of the Anthropocene. The date proposed was correlated to the work presented in IUGG (Italy 2007) with the title "Cusco base meridian for the study of geophysical data"; Cusco was

3. Border collisions inside the stability domain of a fixed point

DEFF Research Database (Denmark)

Avrutin, Viktor; Zhusubaliyev, Zhanybai T.; Mosekilde, Erik

2016-01-01

a complicated interior structure formed by boundaries defined by persistence border collisions. We describe a simple approach that is based on symbolic dynamics and makes it possible to detect such boundaries numerically. Using this approach we describe several regions in the parameter space leading......Recent studies on a power electronic DC/AC converter (inverter) have demonstrated that such systems may undergo a transition from regular dynamics (associated with a globally attracting fixed point of a suitable stroboscopic map) to chaos through an irregular sequence of border-collision events...

4. Point/Counterpoint

DEFF Research Database (Denmark)

Ungar, David; Ernst, Erik

2007-01-01

Point Argument: "Dynamic Languages (in Reactive Environments) Unleash Creativity," by David Ungar. For the sake of creativity, the profession needs to concentrate more on inventing new and better dynamic languages and environments and less on improving static languages. Counterpoint Argument......: "Explicitly Declared Static Types: The Missing Links," by Erik Ernst. How do we understand software? Using it is a powerful approach, but it provides examples of properties, not general truths. Some static knowledge is needed. This department is part of a special issue on dynamically typed languages....

5. Mise au point

African Journals Online (AJOL)

tomie est replacé et fixé par des fils d'acier, krönlein lais- sait ce fragment pédiculé au fascia temporalis afin d'évi- ter la dépression de la fosse temporale due à la désinser- tion du muscle temporal [20] ; dans notre série, après reconstitution du cadre, le muscle temporal est suturé à son point d'insertion. pour les tumeurs ...

Directory of Open Access Journals (Sweden)

Richard J Chen, MD

2018-04-01

Full Text Available History of present illness: 70-year-old male with a history ventricular arrhythmia, AICD (automated implantable cardioverter defibrillator, coronary artery disease and cardiac stents presented to the Emergency Department after three AICD discharges with dyspnea but no chest pain. During triage, he was found to have an irregular radial pulse and was placed on a cardiac monitor. Significant findings: The patient was found to be in a polymorphic ventricular tachycardia; he was alert, awake and asymptomatic. A rhythm strip showed a wide complex tachycardia with the QRS complex varying in amplitude around the isoelectric line consistent with Torsades de Pointes. Discussion: Torsades de Pointes (TdP is a specific type of polymorphic ventricular tachycardia. The arrhythmia’s characteristic morphology consists of the QRS complex “twisting” around the isoelectric line with gradual variation of the amplitude, reflecting its literal translation of “twisting of the points.”1 This arrhythmia occurs in the context of prolonged QT. The most common form of acquired QT prolongation is medication induced. Common causes include antiarrhythmics, antipsychotics, antiemetics, and antibiotics.2 Patient specific risk factors include female sex, bradycardia, hypokalemia, hypomagnesemia, hypocalcemia, hypothermia and heart disease.3 In the setting of prolonged QT, the repolarization phase is extended. TdP is initiated when a PVC (premature ventricular contraction occurs during this repolarization, known as an ‘R on T’ phenomenon. TdP is often asymptomatic and self-limited. The danger in TdP is its potential to deteriorate into ventricular fibrillation. A mainstay of management of TdP is prevention of risk factors when possible.4 Unstable patients should be treated with synchronized cardioversion. Magnesium sulfate should be administered in all cases of TdP.1 If a patient is not responsive to magnesium, consider isoproterenol, amiodarone, and overdrive

7. Pointing control for LDR

Science.gov (United States)

Yam, Y.; Briggs, C.

1988-01-01

One important aspect of the LDR control problem is the possible excitations of structural modes due to random disturbances, mirror chopping, and slewing maneuvers. An analysis was performed to yield a first order estimate of the effects of such dynamic excitations. The analysis involved a study of slewing jitters, chopping jitters, disturbance responses, and pointing errors, making use of a simplified planar LDR model which describes the LDR dynamics on a plane perpendicular to the primary reflector. Briefly, the results indicate that the command slewing profile plays an important role in minimizing the resultant jitter, even to a level acceptable without any control action. An optimal profile should therefore be studied.

8. Point of Care Ultrasound

DEFF Research Database (Denmark)

Dietrich, Christoph F; Goudie, Adrian; Chiorean, Liliana

2017-01-01

Over the last decade, the use of portable ultrasound scanners has enhanced the concept of point of care ultrasound (PoC-US), namely, "ultrasound performed at the bedside and interpreted directly by the treating clinician." PoC-US is not a replacement for comprehensive ultrasound, but rather allows...... and critical care medicine, cardiology, anesthesiology, rheumatology, obstetrics, neonatology, gynecology, gastroenterology and many other applications. In the future, PoC-US will be more diverse than ever and be included in medical student training....

9. The point on.

International Nuclear Information System (INIS)

1996-01-01

In this last article, we find the point of view about the world petroleum activity, the reserves and the recent discoveries, the deep offshore, the technological developments in petroleum upstream. The petroleum situation in China is treated. The trends of world refining are described. The recent technological developments in the petroleum downstream are detailed. The prices of crude oil and the refining margins are the subject of a chapter. The investments of hydrocarbons area are given, the world trade and the lng projects, the gas availability in Western Europe have their place. The trends of European automobile industry and the fuels distribution are also discussed. (N.C.)

10. Modeling vehicle interior noise exposure dose on freeways: Considering weaving segment designs and engine operation.

Science.gov (United States)

Li, Qing; Qiao, Fengxiang; Yu, Lei; Shi, Junqing

2017-07-05

Vehicle interior noise functions at the dominant frequencies of 500 Hz below and around 800 Hz, which fall into the bands that may impair hearing. Recent studies demonstrated that freeway commuters are chronically exposed to vehicle interior noise, bearing the risk of hearing impairment. The interior noise evaluation process is mostly conducted in a laboratory environment. The test results and the developed noise models may underestimate or ignore the noise effects from dynamic traffic and road conditions and configuration. However, the interior noise is highly associated with vehicle maneuvering. The vehicle maneuvering on a freeway weaving segment is more complex because of its nature of conflicting areas. This research is intended to explore the risk of the interior noise exposure on freeway weaving segments for freeway commuters and to improve the interior noise estimation by constructing a decision tree learning-based noise exposure dose (NED) model, considering weaving segment designs and engine operation. On-road driving tests were conducted on 12 subjects on State Highway 288 in Houston, Texas. On-board Diagnosis (OBD) II, a smartphone-based roughness app, and a digital sound meter were used to collect vehicle maneuvering and engine information, International Roughness Index, and interior noise levels, respectively. Eleven variables were obtainable from the driving tests, including the length and type of a weaving segment, serving as predictors. The importance of the predictors was estimated by their out-of-bag-permuted predictor delta errors. The hazardous exposure level of the interior noise on weaving segments was quantified to hazard quotient, NED, and daily noise exposure level, respectively. Results showed that the risk of hearing impairment on freeway is acceptable; the interior noise level is the most sensitive to the pavement roughness and is subject to freeway configuration and traffic conditions. The constructed NED model shows high predictive

11. Grid-based Continual Analysis of Molecular Interior for Drug Discovery, QSAR and QSPR.

Science.gov (United States)

Potemkin, Andrey V; Grishina, Maria A; Potemkin, Vladimir A

2017-01-01

In 1979, R.D.Cramer and M.Milne made a first realization of 3D comparison of molecules by aligning them in space and by mapping their molecular fields to a 3D grid. Further, this approach was developed as the DYLOMMS (Dynamic Lattice- Oriented Molecular Modelling System) approach. In 1984, H.Wold and S.Wold proposed the use of partial least squares (PLS) analysis, instead of principal component analysis, to correlate the field values with biological activities. Then, in 1988, the method which was called CoMFA (Comparative Molecular Field Analysis) was introduced and the appropriate software became commercially available. Since 1988, a lot of 3D QSAR methods, algorithms and their modifications are introduced for solving of virtual drug discovery problems (e.g., CoMSIA, CoMMA, HINT, HASL, GOLPE, GRID, PARM, Raptor, BiS, CiS, ConGO,). All the methods can be divided into two groups (classes):1. Methods studying the exterior of molecules; 2) Methods studying the interior of molecules. A series of grid-based computational technologies for Continual Molecular Interior analysis (CoMIn) are invented in the current paper. The grid-based analysis is fulfilled by means of a lattice construction analogously to many other grid-based methods. The further continual elucidation of molecular structure is performed in various ways. (i) In terms of intermolecular interactions potentials. This can be represented as a superposition of Coulomb, Van der Waals interactions and hydrogen bonds. All the potentials are well known continual functions and their values can be determined in all lattice points for a molecule. (ii) In the terms of quantum functions such as electron density distribution, Laplacian and Hamiltonian of electron density distribution, potential energy distribution, the highest occupied and the lowest unoccupied molecular orbitals distribution and their superposition. To reduce time of calculations using quantum methods based on the first principles, an original quantum

12. Relative Critical Points

Directory of Open Access Journals (Sweden)

Debra Lewis

2013-05-01

Full Text Available Relative equilibria of Lagrangian and Hamiltonian systems with symmetry are critical points of appropriate scalar functions parametrized by the Lie algebra (or its dual of the symmetry group. Setting aside the structures – symplectic, Poisson, or variational – generating dynamical systems from such functions highlights the common features of their construction and analysis, and supports the construction of analogous functions in non-Hamiltonian settings. If the symmetry group is nonabelian, the functions are invariant only with respect to the isotropy subgroup of the given parameter value. Replacing the parametrized family of functions with a single function on the product manifold and extending the action using the (coadjoint action on the algebra or its dual yields a fully invariant function. An invariant map can be used to reverse the usual perspective: rather than selecting a parametrized family of functions and finding their critical points, conditions under which functions will be critical on specific orbits, typically distinguished by isotropy class, can be derived. This strategy is illustrated using several well-known mechanical systems – the Lagrange top, the double spherical pendulum, the free rigid body, and the Riemann ellipsoids – and generalizations of these systems.

13. Reassessing Function Points

Directory of Open Access Journals (Sweden)

G.R. Finnie

1997-05-01

Full Text Available Accurate estimation of the size and development effort for software projects requires estimation models which can be used early enough in the development life cycle to be of practical value. Function Point Analysis (FPA has become possibly the most widely used estimation technique in practice. However the technique was developed in the data processing environment of the 1970's and, despite undergoing considerable reassessment and formalisation, still attracts criticism for the weighting scoring it employs and for the way in which the function point score is adapted for specific system characteristics. This paper reviews the validity of the weighting scheme and the value of adjusting for system characteristics by studying their effect in a sample of 299 software developments. In general the value adjustment scheme does not appear to cater for differences in productivity. The weighting scheme used to adjust system components in terms of being simple, average or complex also appears suspect and should be redesigned to provide a more realistic estimate of system functionality.

14. Bright point study

International Nuclear Information System (INIS)

Tang, F.; Harvey, K.; Bruner, M.; Kent, B.; Antonucci, E.

1982-01-01

Transition region and coronal observations of bright points by instruments aboard the Solar Maximum Mission and high resolution photospheric magnetograph observations on September 11, 1980 are presented. A total of 31 bipolar ephemeral regions were found in the photosphere from birth in 9.3 hours of combined magnetograph observations from three observatories. Two of the three ephemeral regions present in the field of view of the Ultraviolet Spectrometer-Polarimeter were observed in the C IV 1548 line. The unobserved ephemeral region was determined to be the shortest-lived (2.5 hr) and lowest in magnetic flux density (13G) of the three regions. The Flat Crystal Spectrometer observed only low level signals in the O VIII 18.969 A line, which were not statistically significant to be positively identified with any of the 16 ephemeral regions detected in the photosphere. In addition, the data indicate that at any given time there lacked a one-to-one correspondence between observable bright points and photospheric ephemeral regions, while more ephemeral regions were observed than their counterparts in the transition region and the corona

15. Referential Zero Point

Directory of Open Access Journals (Sweden)

Matjaž Potrč

2016-04-01

Full Text Available Perhaps the most important controversy in which ordinary language philosophy was involved is that of definite descriptions, presenting referential act as a community-involving communication-intention endeavor, thereby opposing the direct acquaintance-based and logical proper names inspired reference aimed at securing truth conditions of referential expression. The problem of reference is that of obtaining access to the matters in the world. This access may be forthcoming through the senses, or through descriptions. A review of how the problem of reference is handled shows though that one main practice is to indulge in relations of acquaintance supporting logical proper names, demonstratives, indexicals and causal or historical chains. This testifies that the problem of reference involves the zero point, and with it phenomenology of intentionality. Communication-intention is but one dimension of rich phenomenology that constitutes an agent’s experiential space, his experiential world. Zero point is another constitutive aspect of phenomenology involved in the referential relation. Realizing that the problem of reference is phenomenology based opens a new perspective upon the contribution of analytical philosophy in this area, reconciling it with continental approach, and demonstrating variations of the impossibility related to the real. Chromatic illumination from the cognitive background empowers the referential act, in the best tradition of ordinary language philosophy.

16. Evaluation of Standard Concepts Design of Library Interior Physical Environment

Directory of Open Access Journals (Sweden)

Debri Harindya Putri

2018-01-01

Full Text Available Currently the function of a room is not only used as a shelter, the function of the room itself to be increased as a refreshing or relaxation area for users to follow the development of creativity and technology in the field of design. The comfortable factor becomes the main factor that indicates a successful process of creating a space. No exception library. The nature of library seemed stiff because of its function as a place to read, now can be developed and made into more dynamic with the special design concepts or color patterns used. Libraries can be created a special concept that suits the characteristics of the users themselves. Most users of the library, especially in college libraries are teenagers. Naturally, teenagers like to gather with their friends and we have to facilitate this activity in our library design concept. In addition we can also determine the needs of users through research by questionnaire method. The answers of users can be mapped and drawn conclusions. To explore the research, the author reviewed some literature about library interior design and observed the library of Ma Chung University as a case study. The combined results of the method can be concluded and the discovery of ideal standards of physical environment. So, the library can be made as a comfortable reading environment so as to increased interest in reading behavior and the frequent visits of students in the library

17. Experimental Study of Interior Temperature Distribution Inside Parked Automobile Cabin

Directory of Open Access Journals (Sweden)

Issam Mohammed Ali Aljubury

2015-03-01

Full Text Available Temperature inside the vehicle cabin is very important to provide comfortable conditions to the car passengers. Temperature inside the cabin will be increased, when the car is left or parked directly under the sunlight. Experimental studies were performed in Baghdad, Iraq (33.3 oN, 44.4 oE to investigate the effects of solar radiation on car cabin components (dashboard, steering wheel, seat, and inside air. The test vehicle was oriented to face south to ensure maximum (thermal sun load on the front windscreen. Six different parking conditions were investigated. A suggested car cover was examined experimentally. The measurements were recorded for clear sky summer days started at 8 A.M. till 5 P.M. Results show that interior air temperature in unshaded parked car reaches 70oC and dashboard temperature can approach 100 oC. While, cardboard car shade inside the car not reduce the air temperature inside it. Suggested car cover with 1 cm part-down side windows reduced temperature of cabin components by 70 % in average compare to the base case.

18. Microbial Habitability and Pleistocene Aridification of the Asian Interior.

Science.gov (United States)

Wang, Jiuyi; Lowenstein, Tim K; Fang, Xiaomin

2016-06-01

Fluid inclusions trapped in ancient halite can contain a community of halophilic prokaryotes and eukaryotes that inhabited the surface brines from which the halite formed. Long-term survival of bacteria and archaea and preservation of DNA have been reported from halite, but little is known about the distribution of microbes in buried evaporites. Here we report the discovery of prokaryotes and single-celled algae in fluid inclusions in Pleistocene halite, up to 2.26 Ma in age, from the Qaidam Basin, China. We show that water activity (aw), a measure of water availability and an environmental control on biological habitability in surface brines, is also related to microbe entrapment in fluid inclusions. The aw of Qaidam Basin brines progressively decreased over the last ∼1 million years, driven by aridification of the Asian interior, which led to decreased precipitation and water inflow and heightened evaporation rates. These changes in water balance produced highly concentrated brines, which reduced the habitability of surface lakes and decreased the number of microbes trapped in halite. By 0.13 Ma, the aw of surface brines approached the limits tolerated by halophilic prokaryotes and algae. These results show the response of microbial ecosystems to climate change in an extreme environment, which will guide future studies exploring deep life on Earth and elsewhere in the Solar System. Halite fluid inclusions-Ancient microbes-Water activity-Qaidam Basin-Pleistocene aridification. Astrobiology 16, 379-388.

19. Exploratory shaft conceptual design report: Gulf Interior Region salt domes

International Nuclear Information System (INIS)

1983-07-01

This conceptual design report summarizes the conceptualized design for an exploratory shaft facility at a representative site in the Gulf Interior Region of the United States (Louisiana and Mississippi). Conceptualized designs for other possible locations (Paradox Basin in Utah and Permian Basin in Texas) are summarized in separate reports. The purpose of the exploratory shaft facility is to provide access to the reference repository horizon to permit in-situ testing of the salt. The in-situ testing is necessary to verify repository salt design parameters, evaluate isotropy and homoqeneity of the salt, and provide a demonstration of the constructability and confirmation of the design to gain access to the repository. The fundamental purpose of this conceptual design report is to assure the feasibility of the exploratory shaft project and to develop a reliable cost estimate and realistic schedule. Because a site has not been selected and site-specific subsurface data are not available, it has been necessary to make certain assumptions in order to develop a conceptural design for an exploratory shaft facility in salt. As more definitive information becomes available to support the design process, adjustments in the projected schedule and estimated costs will be required

20. Large deficiency of polonium in the oligotrophic ocean's interior

Science.gov (United States)

Kim, Guebuem

2001-09-01

The naturally occurring radionuclide 210Po is typically deficient relative to its parent 210Pb in the surface ocean due to preferential removal by biota, while in near equilibrium or excess below the surface mixed layer due to rapid regeneration from sinking organic matter. However, a strikingly large deficit of 210Po is observed in the oligotrophic Sargasso Sea's interior. This argues against the general concept that the removal of reactive elements depends on the population of settling particles. A 210Po mass balance model suggests that rather than downward transport, polonium (proxy for S, Se, and Te) is taken up efficiently by bacteria (i.e., cyanobacteria) and transferred to higher trophic levels (i.e., nekton) in this environment. In contrast, in productive areas of the ocean, sulfur group elements seem to reside in the subsurface ocean for much longer periods as taken up by abundant free-living bacteria (non-sinking fine particles). This study sheds new light on global biogeochemical cycling of sulfur group elements in association with microbial roles, and suggests that 210Po may be useful as a tracer of nitrogen fixation in the ocean.