WorldWideScience

Sample records for matlab envi gis

  1. Orthogonal transformations for change detection, Matlab code (ENVI-like headers)

    DEFF Research Database (Denmark)

    2007-01-01

    Matlab code to do (iteratively reweighted) multivariate alteration detection (MAD) analysis, maximum autocorrelation factor (MAF) analysis, canonical correlation analysis (CCA) and principal component analysis (PCA) on image data; accommodates ENVI (like) header files.......Matlab code to do (iteratively reweighted) multivariate alteration detection (MAD) analysis, maximum autocorrelation factor (MAF) analysis, canonical correlation analysis (CCA) and principal component analysis (PCA) on image data; accommodates ENVI (like) header files....

  2. Why envy outperforms admiration.

    Science.gov (United States)

    van de Ven, Niels; Zeelenberg, Marcel; Pieters, Rik

    2011-06-01

    Four studies tested the hypothesis that the emotion of benign envy, but not the emotions of admiration or malicious envy, motivates people to improve themselves. Studies 1 to 3 found that only benign envy was related to the motivation to study more (Study 1) and to actual performance on the Remote Associates Task (which measures intelligence and creativity; Studies 2 and 3). Study 4 found that an upward social comparison triggered benign envy and subsequent better performance only when people thought self-improvement was attainable. When participants thought self-improvement was hard, an upward social comparison led to more admiration and no motivation to do better. Implications of these findings for theories of social emotions such as envy, social comparisons, and for understanding the influence of role models are discussed.

  3. The niche of envy

    DEFF Research Database (Denmark)

    Quintanilla, Laura; Jensen de López, Kristine M.

    2013-01-01

    -cultural, psychological, and anthropological research. Finally, in the third section, we introduce a cross-cultural and developmental view of how envy is embodied. We briefly address and offer a critique of Klein’s psychoanalytic view and present recent results from our cross-cultural studies of the ontogenesis...

  4. When envy leads to schadenfreude.

    Science.gov (United States)

    van de Ven, Niels; Hoogland, Charles E; Smith, Richard H; van Dijk, Wilco W; Breugelmans, Seger M; Zeelenberg, Marcel

    2015-01-01

    Previous research has yielded inconsistent findings concerning the relationship between envy and schadenfreude. Three studies examined whether the distinction between benign and malicious envy can resolve this inconsistency. We found that malicious envy is related to schadenfreude, while benign envy is not. This result held both in the Netherlands where benign and malicious envy are indicated by separate words (Study 1: Sample A, N = 139; Sample B, N = 150), and in the USA where a single word is used to denote both types (Study 2, N = 180; Study 3, N = 349). Moreover, the effect of malicious envy on schadenfreude was independent of other antecedents of schadenfreude (such as feelings of inferiority, disliking the target person, anger, and perceived deservedness). These findings improve our understanding of the antecedents of schadenfreude and help reconcile seemingly contradictory findings on the relationship between envy and schadenfreude.

  5. Antecedents and Consequences of Envy.

    Science.gov (United States)

    Thompson, Geir; Glasø, Lars; Martinsen, Øyvind

    2016-01-01

    The aim of this study was to examine the relationship between individual attributes and envy, and to determine how envy may impact personal response variables in the workplace. To address these issues we apply Vecchio's theory on antecedents and consequences of envy (1995) as a theoretical framework. The present study relied on a cross-sectional measurement design. A total of 135 leaders and 772 followers employed in business organizations participated. SEM analysis shows that span of supervision serves as an important antecedent of envy, where span of supervision is significantly associated to envy via supportive leadership. Furthermore, envy seems to be indirectly and negatively related to self-esteem via distress and directly related to social loafing. The implications of these findings are discussed, and suggestions for future research are outlined.

  6. "Green with envy"

    DEFF Research Database (Denmark)

    Staunæs, Dorthe

    2018-01-01

    as a mortal sin, is shown as integral of the ambiguous affective economy following the wake of the motivational technologies used to translate the Danish school reform of 2014 into everyday class rooms. Grasping and following the invidious complex as performative effects of the intra-action of policy......, motivational technologies, and student bodies is a way of researching the implementation of a reform beyond the already designed tales of the reform. The point of formulating envy as an affirmative critique is not to debunk visual devices or motivational technologies. Rather, it is to provide a more complex...

  7. Appraisal patterns of envy and related emotions

    OpenAIRE

    van de Ven, Niels; Zeelenberg, Marcel; Pieters, Rik

    2011-01-01

    Envy is a frustrating emotion that arises from upward social comparison. Two studies investigated the appraisals that distinguish benign envy (aimed at improving one’s own situation) from malicious envy (aimed at pulling down the superior other). Study 1 found that appraisals of deservingness and control potential differentiated both types of envy. We manipulated these appraisals in Study 2 and found that while both did not influence the intensity of envy, they did determine the type of envy ...

  8. Envy divides the two faces of narcissism.

    Science.gov (United States)

    Krizan, Zlatan; Johar, Omesh

    2012-10-01

    In this article, we test psychodynamic assumptions about envy and narcissism by examining malicious envy in the context of narcissistic grandiosity and vulnerability. In Study 1, students (N = 192) and community adults (N = 161) completed trait measures of narcissism, envy, and schadenfreude. In Study 2 (N = 121), participants relived an episode of envy, and cognitive-affective components of envy were examined in the context of both self- and informant reports of their envy and narcissism. In Study 3 (N = 69), narcissism was linked to reports of envy covertly induced in the laboratory. Vulnerable narcissism was strongly and consistently related to dispositional envy and schadenfreude (Studies 1-2), as well as to all cognitive-affective components of envy (Study 2). Furthermore, it facilitated envy and schadenfreude toward a high-status peer (Study 3). Grandiose narcissism was slightly negatively related to dispositional envy (Studies 1-2), and it did not predict informant reports of envy or cognitive-affective components of the emotion (Study 2). Finally, it did not exacerbate envy, hostility, or resentment toward a high-status peer (Study 3). The results suggest envy is a central emotion in the lives of those with narcissistic vulnerability and imply that envy should be reconsidered as a symptom accompanying grandiose features in the diagnosis of narcissistic personality disorder. © 2012 The Authors. Journal of Personality © 2012, Wiley Periodicals, Inc.

  9. Appraisal patterns of envy and related emotions.

    Science.gov (United States)

    van de Ven, Niels; Zeelenberg, Marcel; Pieters, Rik

    2012-06-01

    Envy is a frustrating emotion that arises from upward social comparison. Two studies investigated the appraisals that distinguish benign envy (aimed at improving one's own situation) from malicious envy (aimed at pulling down the superior other). Study 1 found that appraisals of deservingness and control potential differentiated both types of envy. We manipulated these appraisals in Study 2 and found that while both did not influence the intensity of envy, they did determine the type of envy that resulted. The more a situation was appraised as undeserved, the more participants experienced malicious envy. Benign envy was experienced more when the situation was not undeserved, and the most when the situation was appraised as both deserved and controllable. The current research also clarifies how the types of envy differ from the related emotions admiration and resentment.

  10. Appraisal patterns of envy and related emotions

    NARCIS (Netherlands)

    van de Ven, N.; Zeelenberg, M.; Pieters, R.

    2012-01-01

    Envy is a frustrating emotion that arises from upward social comparison. Two studies investigated the appraisals that distinguish benign envy (aimed at improving one’s own situation) from malicious envy (aimed at pulling down the superior other). Study 1 found that appraisals of deservingness and

  11. MATLAB - Introduction

    International Nuclear Information System (INIS)

    Jung, Heon Seul

    2005-08-01

    This book introduces MATLAB giving descriptions of analysis and design of this control system like what is control? cases of control system, working environment of MATLAB, signs of MATLAB, commands of MATLAB, and drawing graphs. It also tells of basic use of simulink, mathematical model of physical system like mechanical-electrical analogous system, system analysis in time part, frequency analysis, state space and design such as canonical from and principle of duality and state observer design.

  12. MATLAB syntaksen

    DEFF Research Database (Denmark)

    Skajaa, Anders; Jørgensen, Jakob Heide

    MATLAB er et matematik-program som fokuserer på anvendelsen af matricer og vektorer. Deraf navnet MATrix LABoratory. Denne bog er en praktisk vejledning i at forstår og anvende MATLAB syntaksen og fungerer som en hurtig genvej til dig, der skal i gang med at anvende MATLAB i forbindelse med fx dit...

  13. Elucidating the Dark Side of Envy: Distinctive Links of Benign and Malicious Envy With Dark Personalities

    Science.gov (United States)

    Lange, Jens; Paulhus, Delroy L.; Crusius, Jan

    2017-01-01

    Researchers have recently drawn a contrast between two forms of envy: benign and malicious envy. In three studies (total N = 3,123), we challenge the assumption that malicious envy is destructive, whereas benign envy is entirely constructive. Instead, both forms have links with the Dark Triad of personality. Benign envy is associated with Machiavellian behaviors, whereas malicious envy is associated with both Machiavellian and psychopathic behaviors. In Study 1, this pattern emerged from meta-analyzed trait correlations. In Study 2, a manipulation affecting the envy forms mediated an effect on antisocial behavioral intentions. Study 3 replicated these patterns by linking envy to specific antisocial behaviors and their impact on status in the workplace. Together, our correlational and experimental results suggest that the two forms of envy can both be malevolent. Instead of evaluating envy’s morality, we propose to focus on its functional value. PMID:29271287

  14. Burning With Envy? Dispositional and Situational Influences on Envy in Grandiose and Vulnerable Narcissism.

    Science.gov (United States)

    Neufeld, Darren C; Johnson, Edward A

    2016-10-01

    Research on narcissism and envy suggests a variable relationship that may reflect differences between how vulnerable and grandiose narcissism relate to precursors of envy. Accordingly, we proposed a model in which dispositional envy and relative deprivation differentially mediate envy's association with narcissistic vulnerability, grandiosity, and entitlement. To test the model, 330 young adults completed dispositional measures of narcissism, entitlement, and envy; one week later, participants reported on deprivation and envy feelings toward a peer who outperformed others on an intelligence test for a cash prize (Study 1) or earned higher monetary payouts in a betting game (Study 2). In both studies, structural equation modeling broadly supported the proposed model. Vulnerable narcissism robustly predicted episodic envy via dispositional envy. Entitlement-a narcissistic facet common to grandiosity and vulnerability-was a significant indirect predictor via relative deprivation. Study 2 also found that (a) the grandiose leadership/authority facet indirectly curbed envy feelings via dispositional envy, and (b) episodic envy contributed to schadenfreude feelings, which promoted efforts to sabotage a successful rival. Whereas vulnerable narcissists appear dispositionally envy-prone, grandiose narcissists may be dispositionally protected. Both, however, are susceptible to envy through entitlement when relative deprivation is encountered. © 2015 Wiley Periodicals, Inc.

  15. Envy and jealousy in Classical Athens

    OpenAIRE

    Sanders, E. M.

    2010-01-01

    Emotions differ between cultures, especially in their eliciting conditions, social acceptability, forms of expression, and co-extent of terminology. This thesis examines the psychological sensation and social expression of envy and jealousy in Classical Athens. Previous scholarship on envy and jealousy (Walcot 1978, Konstan and Rutter 2003) has primarily taken a lexical approach, focusing on usage of the Greek words phthonos (envy, begrudging spite, possessive jealousy) and zêl...

  16. Envi

    African Journals Online (AJOL)

    USER

    2017-03-13

    Mar 13, 2017 ... Biology and Biotechnology, University of Benin, Benin City, Nigeria ... Stomata number was more on the abaxial surface than adaxial surface in all ... world were significant gas flaring ... The entire project site was radially ... Slides were examined with top-view light ... measurements in light microscope (LM).

  17. Dispositional envy revisited: unraveling the motivational dynamics of benign and malicious envy.

    Science.gov (United States)

    Lange, Jens; Crusius, Jan

    2015-02-01

    Previous research has conceptualized dispositional envy as a unitary construct. Recently however, episodic envy has been shown to emerge in two qualitatively different forms. Benign envy is related to the motivation to move upward, whereas malicious envy is related to pulling superior others down. In four studies (N = 1,094)--using the newly developed Benign and Malicious Envy Scale (BeMaS)--we show that dispositional envy is also characterized by two independent dimensions related to distinct motivational dynamics and behavioral consequences. Dispositional benign and malicious envy uniquely predict envious responding following upward social comparisons. Furthermore, they are differentially connected to hope for success and fear of failure. Corresponding to these links, dispositional benign envy predicted faster race performance of marathon runners mediated via higher goal setting. In contrast, dispositional malicious envy predicted race goal disengagement. The findings highlight that disentangling the two sides of envy opens up numerous research avenues. © 2014 by the Society for Personality and Social Psychology, Inc.

  18. Enterprise Potential, Entrepreneurial Intentions and Envy

    Directory of Open Access Journals (Sweden)

    Edit Terek

    2017-06-01

    Full Text Available This paper presents the results of research about the impact of envy on enterprise potential and entrepreneurial intentions. The research was conducted in Serbia and the respondents were students from 5 faculties, from the first to the fifth year of study. The results were gained by statistical analysis of the gathered information (380 completed questionnaires. Descriptive, correlation and regression analysis are the methods of statistical analysis that were used. From the dimensions of enterprise potential, the highest average value has the dimension Creativity, while from the dimensions of entrepreneurial intentions, the highest average value has the dimension Subjective norm. Of all the observed dimensions, the lowest value has the Envy dimension. Between envy and dimensions of enterprise potential and dimensions of entrepreneurial intentions, there are a number of statistically significant negative correlations. This is more prevalent at the dimension of entrepreneurial intentions. Feelings of inferiority in relation to other people and the perception of having a boring or a bad life have an especially negative impact on entrepreneurial potential and intentions. Envy, which occurs due to the desire for more entertainment, travel, and due to the perception of the lack of fortune, also has a negative impact on entrepreneurial potential and intentions, but the influence is considerably weaker. There is a statistically significant predictive effect of certain items of envy on enterprise potential dimensions and entrepreneurial intentions dimensions. But this fact is not so strongly expressed. Some results suggest the possibility (however small that envy, in some circumstances, can mildly encourage entrepreneurial intention.

  19. The two faces of envy : Studying benign and malicious envy in the workplace

    NARCIS (Netherlands)

    Sterling, Christopher M.; van de Ven, Niels; Smith, Richard H.; Smith, R.H.; Merlone, U.; Duffy, M.K.

    2016-01-01

    As this book shows, we are starting to understand more about the nature of envy, the content of its emotional experience, and its effects in an organization. Envy is the result of an upward social comparison, one that signals to someone that he or she lacks desired abilities, traits or rewards

  20. Greed, Envy, Jealousy - A Tool for more Efficient Resource Management

    NARCIS (Netherlands)

    Farjam, M.D.; Haselager, W.F.G.; Sprinkhuizen-Kuyper, I.G.; Uiterwijk, J.W.H.M.; Roos, N.; Winands, M.H.M.

    2012-01-01

    Highly social animals like humans developed features such as greed, envy, and jealousy through evolution. Assuming that the concept of envy has already been learned, experiments are performed in an artificial life environment. They show the benefits of envy for a multiagent system and how principles

  1. Clinical Perspective Working with a child's envy in the transference ...

    African Journals Online (AJOL)

    Karl Abrahams and Melanie Klein later placed envy at the crucial developing stages of the relationship between primary caregiver and infant. Klein boldly identified envy as a primary constitutional emotion. However, the presence and difficulties of envy in clinical work remain largely underreported, more so in work with ...

  2. Social Responsibility and Envy: Multicultural Reflections

    Science.gov (United States)

    Canen, Alberto G.; Ivenicki, Ana

    2015-01-01

    Multicultural organizations can be central to mitigate organizational situations in which envy could potentially flourish, therefore contributing to fostering organizational conduct that leads to institutional social responsibility. The paper focuses on the inner workings of organizations related to their leaders' understanding of what the…

  3. The painful duality of envy: Evidence for an integrative theory and a meta-analysis on the relation of envy and schadenfreude.

    Science.gov (United States)

    Lange, Jens; Weidman, Aaron C; Crusius, Jan

    2018-04-01

    Despite envy's importance as a driver of social behavior, scholars disagree on its conceptualization. We review the literature and distinguish three incongruent theories: (a) Malicious Envy Theory (i.e., envy as uniform and malicious), (b) Dual Envy Theory (i.e., envy as taking on 2 forms, benign and malicious), and (c) Pain Theory of Envy (i.e., envy as uniform and driven by pain). Moreover, within and across theories, operationalizations of envy have included various different components. We integrate these conceptualizations using a data-driven approach, deriving a comprehensive theory of envy in 5 studies (total N = 1,237)-the Pain-driven Dual Envy (PaDE) Theory. Exploratory and confirmatory factor analyses of an exhaustive set of envy components (Studies 1-4) suggest that envy consists of 3 factors: Pain (i.e., preoccupation with the envy-eliciting situation, inferiority), predicts both benign envy (i.e., desire for the envy object, improvement motivation, emulation of the other), and malicious envy (i.e., communication about the other, directed aggression, nondirected aggression). An experience-sampling study (Study 5) suggests that pain constitutes a quickly fading reaction, whereas benign and malicious envy are enduring attitudinal constructs. We apply this theory in a meta-analysis on the controversial relation of envy and schadenfreude (N = 4,366), finding that envy and schadenfreude are more strongly and positively correlated to the extent that the respective research operationalizes envy as malicious, compared with as pain or benign envy. We discuss how the PaDE Theory can illuminate research on envy in diverse settings, and envy's relation to other distinct emotions. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  4. Envy and admiration: emotion and motivation following upward social comparison.

    Science.gov (United States)

    van de Ven, Niels

    2017-01-01

    Two key emotions people can experience when someone else is better than them are envy and admiration. There are conflicting findings in the scientific literature on which behaviour is elicited by these emotions. In one study (with two samples, total N = 345), we test which motivations are triggered by envy and admiration. The main finding is that (benign) envy and admiration both lead to a motivation to improve oneself. This confirms earlier findings that admiration leads to a motivation to affiliate with the admired other and a motivation to improve one's own position. Furthermore, it supports the idea that envy can lead to both a motivation to improve oneself and a motivation to pull down the envied other, finding support for a subtypes theory of envy.

  5. Envy and admiration: Emotion and motivation following upward social comparison

    OpenAIRE

    van de Ven, Niels

    2017-01-01

    Two key emotions people can experience when someone else is better than them are envy and admiration. There are conflicting findings in the scientific literature on which behaviour is elicited by these emotions. In one study (with two samples, total N = 345), we test which motivations are triggered by envy and admiration. The main finding is that (benign) envy and admiration both lead to a motivation to improve oneself. This confirms earlier findings that admiration leads to a motivation to a...

  6. Working with a child's envy in the transference.

    Science.gov (United States)

    Gericke, Renate

    2006-10-01

    In literature, envy has long been written of as one of the seven cardinal sins. In biblical mythology, envy as a consequence of vanity can be understood to be the reason for archangel Lucifer's fall from a state of heavenly grace and unionship. Freud was the first psychoanalytic theorist to introduce the idea of envy, albeit through his controversial concept of penis envy. Karl Abrahams and Melanie Klein later placed envy at the crucial developing stages of the relationship between primary caregiver and infant. Klein boldly identified envy as a primary constitutional emotion. However, the presence and difficulties of envy in clinical work remain largely underreported, more so in work with children. This paper asks whether an attachment base can be secure if envy is dominant. The analysis of a nine-year-old girl ('Kirsten') and her envious transference with her therapist will be examined, to explore the relationship between envy and attachment security. While contemporary research focuses on developing attachment theory in relation to specific psychiatric conditions, this paper will discuss affect as the binding link or disruptive force between self and object representations, that then determine attachment security.

  7. Matlab for dummies

    CERN Document Server

    Sizemore, Jim

    2014-01-01

    Plot graphs, solve equations, and write code in a flash! If you work in a STEM field, chances are you'll be using MATLAB on a daily basis. MATLAB is a popular and powerful computational tool and this book provides everything you need to start manipulating and plotting your data. MATLAB has rapidly become the premier data tool, and MATLAB For Dummies is a comprehensive guide to the fundamentals. MATLAB For Dummies guides you through this complex computational language from installation to visualization to automation.Learn MATLAB's language fundamentals including syntax, operators, and data type

  8. Leveling up and down : The experiences of benign and malicious envy

    NARCIS (Netherlands)

    van de Ven, N.; Zeelenberg, M.; Pieters, R.

    2009-01-01

    Envy is the painful emotion caused by the good fortune of others. This research empirically supports the distinction between two qualitatively different types of envy, namely benign and malicious envy. It reveals that the experience of benign envy leads to a moving-up motivation aimed at improving

  9. Matlab for engineers explained

    CERN Document Server

    Gustafsson, Fredrik

    2003-01-01

    This book is written for students at bachelor and master programs and has four different purposes, which split the book into four parts: 1. To teach first or early year undergraduate engineering students basic knowledge in technical computations and programming using MATLAB. The first part starts from first principles and is therefore well suited both for readers with prior exposure to MATLAB but lacking a solid foundational knowledge of the capabilities of the system and readers not having any previous experience with MATLAB. The foundational knowledge gained from these interactive guided tours of the system will hopefully be sufficient for an effective utilization of MATLAB in the engineering profession, in education and in research. 2. To explain the foundations of more advanced use of MATLAB using the facilities added the last couple of years, such as extended data structures, object orientation and advanced graphics. 3. To give an introduction to the use of MATLAB in typical undergraduate courses in elec...

  10. Matlab linear algebra

    CERN Document Server

    Lopez, Cesar

    2014-01-01

    MATLAB is a high-level language and environment for numerical computation, visualization, and programming. Using MATLAB, you can analyze data, develop algorithms, and create models and applications. The language, tools, and built-in math functions enable you to explore multiple approaches and reach a solution faster than with spreadsheets or traditional programming languages, such as C/C++ or Java. MATLAB Linear Algebra introduces you to the MATLAB language with practical hands-on instructions and results, allowing you to quickly achieve your goals. In addition to giving an introduction to

  11. An examination of envy and jealousy in nursing academia.

    Science.gov (United States)

    Cleary, Michelle; Walter, Garry; Halcomb, Elizabeth; Lopez, Violeta

    2016-07-01

    To discuss envy and jealousy and how their positive and negative aspects among nurse academics affect the workplace. In nursing academia, jealousy and envy are common emotions, engendered by demands for high productivity, intense competition for limited resources, preferences for particular assignments and opportunities for promotions. When these feelings are moderate and part of everyday rivalry, competition and ambition benefit the organisation. However, jealousy and envy can have serious consequences including damaged relationships and communication, and the undermining of colleagues' performance. Strategies are recommended to provide opportunities for self-reflection and consideration of how the workplace affects nursing academics' wellbeing and professional performance. Jealousy and envy can be damaging emotions in the workplace. The embittered, hostile person can undermine and damage relationships, disrupt teams and communication, and undermine organisational performance. Discussing the positive and negative effects of envy and jealousy provides an opportunity for nursing academics to self-reflect and to consider others and their own personal and professional performance. Understanding how jealousy and envy impact on the work environment, workplace relationships and individual/team performance is important especially for early career and seasoned nursing academics alike.

  12. CONCEPTS OF ENVY IN THE PSYCHOLOGICAL THEORIES OF PERSONALITY

    Directory of Open Access Journals (Sweden)

    Татьяна Викторовна Бескова

    2014-04-01

    Full Text Available The article analyzes the foreign and Russian theorists of personality, representing different psychological directions in which there is a reference to the problem of envy. The problem of envy is discussed in the framework of classical psychoanalysis (S. Freud, M. Klein, individual psychology (A. Adler, analytical psychology (C.G. Jung, concept ofhumanistic psychoanalysis (E. Fromm, social-cultural theory (K. Horney, ego-theory (E. Erikson, A. Peeters, dispositional direction (G. Allport, R. Cattell, humanistic psychology (A. Maslow, existential psychology (V. Frankl. It is shown that in Russian theories of personality the problem of envy is reflected in the works of A.A. Bodalev, V.N. Myasishchev, V.N. Panferov, A.V. Petrovsky.Purpose.To carry out the analysis of psychological theories of the personality to identify the specific of ideas of psychological essence and envy sources.Methodology.Theoretical analysis and systematization of scientific data.Results.Separation and heterogeneity of scientific ideas of envy is revealed, that, on the one hand, allows looking at it from different points of view, and with another – counteracts the integration of knowledge of envy into uniform theoretical system.Practical implications. Research results can be used in the practice of psychological consultation, the psycho-correction of the envious relation, the outreach activity of psychologists.DOI: http://dx.doi.org/10.12731/2218-7405-2013-9-68

  13. Comparison 3 - 386 MATLAB

    DEFF Research Database (Denmark)

    Jensen, Niels

    1992-01-01

    MATLAB is a C-based general tool for mathematical and engineering calculations with limited capabilities for simulation of non-linear equation systems.......MATLAB is a C-based general tool for mathematical and engineering calculations with limited capabilities for simulation of non-linear equation systems....

  14. Matlab laser toolbox

    NARCIS (Netherlands)

    Römer, Gerardus Richardus, Bernardus, Engelina; Huis in 't Veld, Bert; Schmidt, M.; Vollertsen, F.; Geiger, M.

    2010-01-01

    Matlab® is a program for numeric computation, simulation and visualization, developed by The Mathworks, Inc. It is used heavily in education, research, and industry, for solving general, as well as application area-specific problems, that arise in various disciplines. For this purpose Matlab has

  15. The Matlab Syntax

    DEFF Research Database (Denmark)

    Jørgensen, Jakob Heide; Skajaa, Anders

    Matlab (MATrix LABoratory) is one of the most widely used programming environments for numerical computations and simulations in the technical sciences. The reason is that Matlab makes it easy to get started as well as to construct advanced programs. This book is a practical guide to understanding...... and using Matlab. It works as a quick reference for anyone who is starting to use Matlab for example while enrolled in university studies. For this reason, the book is limited to covering what is typically used by a university student and is designed as a reference of the syntax including plenty of examples....... While the primary audience of the book is university students, it is well suited for anyone who wants to become acquainted with Matlab....

  16. The Evolutionary Psychology of Envy and Jealousy

    Science.gov (United States)

    Ramachandran, Vilayanur S.; Jalal, Baland

    2017-01-01

    The old dogma has always been that the most complex aspects of human emotions are driven by culture; Germans and English are thought to be straight-laced whereas Italians and Indians are effusive. Yet in the last two decades there has been a growing realization that even though culture plays a major role in the final expression of human nature, there must be a basic scaffolding specified by genes. While this is recognized to be true for simple emotions like anger, fear, and joy, the relevance of evolutionary arguments for more complex nuances of emotion have been inadequately explored. In this paper, we consider envy or jealousy as an example; the feeling evoked when someone is better off than you. Our approach is broadly consistent with traditional evolutionary psychology (EP) approaches, but takes it further by exploring the complexity and functional logic of the emotion – and the precise social triggers that elicit them – by using deliberately farfetched, and contrived “thought experiments” that the subject is asked to participate in. When common sense (e.g., we should be jealous of Bill Gates – not of our slightly richer neighbor) appears to contradict observed behavior (i.e., we are more envious of our neighbor) the paradox can often be resolved by evolutionary considerations which h predict the latter. Many – but not all – EP approaches fail because evolution and common sense do not make contradictory predictions. Finally, we briefly raise the possibility that gaining deeper insight into the evolutionary origins of certain undesirable emotions or behaviors can help shake them off, and may therefore have therapeutic utility. Such an approach would complement current therapies (such as cognitive behavior therapies, psychoanalysis, psychopharmacologies, and hypnotherapy), rather than negate them. PMID:28970815

  17. The Evolutionary Psychology of Envy and Jealousy

    Directory of Open Access Journals (Sweden)

    Vilayanur S. Ramachandran

    2017-09-01

    Full Text Available The old dogma has always been that the most complex aspects of human emotions are driven by culture; Germans and English are thought to be straight-laced whereas Italians and Indians are effusive. Yet in the last two decades there has been a growing realization that even though culture plays a major role in the final expression of human nature, there must be a basic scaffolding specified by genes. While this is recognized to be true for simple emotions like anger, fear, and joy, the relevance of evolutionary arguments for more complex nuances of emotion have been inadequately explored. In this paper, we consider envy or jealousy as an example; the feeling evoked when someone is better off than you. Our approach is broadly consistent with traditional evolutionary psychology (EP approaches, but takes it further by exploring the complexity and functional logic of the emotion – and the precise social triggers that elicit them – by using deliberately farfetched, and contrived “thought experiments” that the subject is asked to participate in. When common sense (e.g., we should be jealous of Bill Gates – not of our slightly richer neighbor appears to contradict observed behavior (i.e., we are more envious of our neighbor the paradox can often be resolved by evolutionary considerations which h predict the latter. Many – but not all – EP approaches fail because evolution and common sense do not make contradictory predictions. Finally, we briefly raise the possibility that gaining deeper insight into the evolutionary origins of certain undesirable emotions or behaviors can help shake them off, and may therefore have therapeutic utility. Such an approach would complement current therapies (such as cognitive behavior therapies, psychoanalysis, psychopharmacologies, and hypnotherapy, rather than negate them.

  18. R and Matlab

    CERN Document Server

    Hiebeler, David E

    2015-01-01

    The First Book to Explain How a User of R or MATLAB Can Benefit from the OtherIn today's increasingly interdisciplinary world, R and MATLAB® users from different backgrounds must often work together and share code. R and MATLAB® is designed for users who already know R or MATLAB and now need to learn the other platform. The book makes the transition from one platform to the other as quick and painless as possible.Enables R and MATLAB Users to Easily Collaborate and Share CodeThe author covers essential tasks, such as working with matrices and vectors, writing functions and other programming co

  19. Essential Matlab and Octave

    CERN Document Server

    Rogel-Salazar, Jesus

    2014-01-01

    ""This is an excellent book for anyone approaching MATLAB or Octave for the first time. The pleasant language used throughout creates the sensation of having the author by your side. … An interesting feature are the examples used to explain the use of functions and operations. … compared to similar texts on Octave and MATLAB, the author introduces at an early stage how to produce line and surface plots with MATLAB and Octave. It is very attractive to students to be able to quickly produce plots with scientific journal quality. … The margin notes are great as they can also work as virtual bookm

  20. Numerical methods using Matlab

    CERN Document Server

    Lindfield, George

    2012-01-01

    Numerical Methods using MATLAB, 3e, is an extensive reference offering hundreds of useful and important numerical algorithms that can be implemented into MATLAB for a graphical interpretation to help researchers analyze a particular outcome. Many worked examples are given together with exercises and solutions to illustrate how numerical methods can be used to study problems that have applications in the biosciences, chaos, optimization, engineering and science across the board. Numerical Methods using MATLAB, 3e, is an extensive reference offering hundreds of use

  1. Intranasal administration of oxytocin increases envy and schadenfreude (gloating).

    Science.gov (United States)

    Shamay-Tsoory, Simone G; Fischer, Meytal; Dvash, Jonathan; Harari, Hagai; Perach-Bloom, Nufar; Levkovitz, Yechiel

    2009-11-01

    Humans have a strong social tendency to compare themselves with others. We tend to feel envious when we receive less valuable rewards and may rejoice when our payoffs are more advantageous. Envy and schadenfreude (gloating over the other's misfortune) are social emotions widely agreed to be a symptom of the human social tendency to compare one's payoffs with those of others. Given the important social components of envy and gloating, we speculated that oxytocin may have a modulating effect on the intensity of these emotions. Fifty-six participants participated in this double-blind, placebo-controlled, within-subject study. Following the administration of oxytocin or a placebo, participants played a game of chance with another (fake) participant who either won more money (envy manipulation), lost more money (schadenfreude manipulation), or won/lost equal amounts of money. In comparison with the placebo, oxytocin increased the envy ratings during unequal monetary gain conditions involving relative loss (when the participant gained less money than another player). Oxytocin also increased the ratings of gloating during relative gain conditions (when the participant gained more money than the other player). By contrast, oxytocin had no effect on the emotional ratings following equal monetary gains nor did it affect general mood ratings. These results suggest that the oxytocinergic system is involved in modulating envy and gloating. Thus, contrary to the prevailing belief that this system is involved solely in positive prosocial behaviors, it probably plays a key role in a wider range of social emotion-related behaviors.

  2. Efficient Matlab Programs

    Data.gov (United States)

    National Aeronautics and Space Administration — Matlab has a reputation for running slowly. Here are some pointers on how to speed computations, to an often unexpected degree. Subjects currently covered: Matrix...

  3. Mathematical Modeling Using MATLAB

    National Research Council Canada - National Science Library

    Phillips, Donovan

    1998-01-01

    .... Mathematical Modeling Using MA MATLAB acts as a companion resource to A First Course in Mathematical Modeling with the goal of guiding the reader to a fuller understanding of the modeling process...

  4. MATLAB matrix algebra

    CERN Document Server

    Pérez López, César

    2014-01-01

    MATLAB is a high-level language and environment for numerical computation, visualization, and programming. Using MATLAB, you can analyze data, develop algorithms, and create models and applications. The language, tools, and built-in math functions enable you to explore multiple approaches and reach a solution faster than with spreadsheets or traditional programming languages, such as C/C++ or Java. MATLAB Matrix Algebra introduces you to the MATLAB language with practical hands-on instructions and results, allowing you to quickly achieve your goals. Starting with a look at symbolic and numeric variables, with an emphasis on vector and matrix variables, you will go on to examine functions and operations that support vectors and matrices as arguments, including those based on analytic parent functions. Computational methods for finding eigenvalues and eigenvectors of matrices are detailed, leading to various matrix decompositions. Applications such as change of bases, the classification of quadratic forms and ...

  5. An introduction to MATLAB.

    Science.gov (United States)

    Sobie, Eric A

    2011-09-13

    This two-part lecture introduces students to the scientific computing language MATLAB. Prior computer programming experience is not required. The lectures present basic concepts of computer programming logic that tend to cause difficulties for beginners in addition to concepts that relate specifically to the MATLAB language syntax. The lectures begin with a discussion of vectors, matrices, and arrays. Because many types of biological data, such as fluorescence images and DNA microarrays, are stored as two-dimensional objects, processing these data is a form of array manipulation, and MATLAB is especially adept at handling such array objects. The students are introduced to basic commands in MATLAB, as well as built-in functions that provide useful shortcuts. The second lecture focuses on the differences between MATLAB scripts and MATLAB functions and describes when one method of programming organization might be preferable to the other. The principles are illustrated through the analysis of experimental data, specifically measurements of intracellular calcium concentration in live cells obtained using confocal microscopy.

  6. DLR-EnviHab - A closed environmental Habitat

    Science.gov (United States)

    Rabbow, E.; Koch, B.; Rettberg, P.; Horneck, G.; Graef, P.; Gerzer, R.

    Closed habitats intended for different purposes like confinement studies, life in extreme environments (Antarctica) and as simulation testbeds for complex closed life support systems have been built and achieved different degrees of closure. Those that were built in preparation of space missions oriented themselves on the need of a crew of astronauts during a long term mission in Space, on Mars or Moon. At DLR in Cologne, a modular approach is followed to build a closed environmental habitat for scientific and medical studies, the DLR-EnviHab. This modular structure of the EnviHab is designed to include humans as integral part in a bioregenerative life support system, and allows a step-wise realization of the project, ensuring useful results for a wide field of scientific research during each phase. The DLR-EnviHab provides a platform for international and interdisciplinary research and the development of innovative solutions for cultivation and habitation on Earth as well as for long term space or planetary missions. By the inclusion of humans as integral component of the system, medical research areas including physiological and psychological health and rehabilitation as well as environmental research and monitoring and modelling of coupled and controlled systems are addressed in EnviHab. Results of the research conducted in the individual and combined EnviHab modules will also contribute to most urgent issues like water(recycling) management, food management, pollution/waste management and atmosphere(air) management. In addition, EnviHab contributes to public education and outreach with the open visible and partly accessible structure, an exhibition and an explanatory module.

  7. Envy and admiration : Emotion and motivation following upward social comparison

    NARCIS (Netherlands)

    van de Ven, Niels

    2017-01-01

    Two key emotions people can experience when someone else is better than them are envy and admiration. There are conflicting findings in the scientific literature on which behaviour is elicited by these emotions. In one study (with two samples, total N = 345), we test which motivations are triggered

  8. Accelerator Toolbox for MATLAB

    International Nuclear Information System (INIS)

    Terebilo, Andrei

    2001-01-01

    This paper introduces Accelerator Toolbox (AT)--a collection of tools to model particle accelerators and beam transport lines in the MATLAB environment. At SSRL, it has become the modeling code of choice for the ongoing design and future operation of the SPEAR 3 synchrotron light source. AT was designed to take advantage of power and simplicity of MATLAB--commercially developed environment for technical computing and visualization. Many examples in this paper illustrate the advantages of the AT approach and contrast it with existing accelerator code frameworks

  9. Introduction à MATLAB

    OpenAIRE

    Zenou, Emmanuel

    2013-01-01

    Cette initiation à MatLab a pour objectif de se familiariser à un outil très utilisé par la communauté scientifique dans les laboratoires et dans l'industrie. Il a également pour objectif d'initier (pour ceux qui n'y ont jamais touché) à la programmation et à l'algorithmique, ce qui est indispensable à tout bon ingénieur aujourd'hui. En effet, beaucoup de notions introduites ici ne sont pas propres à MatLab mais à tout langage structuré comme le C/C++, le Java, etc.

  10. MATLAB 3A

    DEFF Research Database (Denmark)

    Freil, Ole; Kristiansen, Heidi; Kaas, Thomas

    MATLAB 3a – Matematiklaboratoriet er en elevbog til første halvdel af 3. klasse. Bogen indeholder fire kapitler: 'Store tal og regnemåder', 'Kan du tegne det?', 'Gange og division', 'Undersøg data og chance'.......MATLAB 3a – Matematiklaboratoriet er en elevbog til første halvdel af 3. klasse. Bogen indeholder fire kapitler: 'Store tal og regnemåder', 'Kan du tegne det?', 'Gange og division', 'Undersøg data og chance'....

  11. ENVI Model Development for Korean Nuclear Spent Fuel Options Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Sunyoung; Jeong, Yon Hong; Han, Jae-Jun; Lee, Aeri; Hwang, Yong-Soo [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

    2015-10-15

    The disposal facility of the spent nuclear fuel will be operated from 2051. This paper presents the ENVI code developed by GoldSim Software to simulate options for managing spent nuclear fuel (SNF) in South Korea. The ENVI is a simulator to allow decision-makers to assist to evaluate the performance for spent nuclear fuel management. The multiple options for managing the spent nuclear fuel including the storage and transportation are investigated into interim storage, permanent disposal in geological repositories and overseas and domestic reprocessing. The ENVI code uses the GoldSim software to simulate the logistics of the associated activities. The result by the ENVI model not only produces the total cost to compare among the multiple options but also predict the sizes and timings of different facilities required. In order to decide the policy for spent nuclear management this purpose of this paper is to draw the optimum management plan to solve the nuclear spent fuel issue in the economical aspects. This paper is focused on the development of the ENVI's logic and calculations to simulate four options(No Reprocessing, Overseas Reprocessing, Domestic Reprocessing, and Overseas and Domestic Reprocessing) for managing the spent nuclear fuel in South Korea. The time history of the spent nuclear fuel produced from both the existing and future NPP's can be predicted, based on the Goldsim software made available very user friendly model. The simulation result will be used to suggest the strategic plans for the spent nuclear fuel management.

  12. ENVI Model Development for Korean Nuclear Spent Fuel Options Analysis

    International Nuclear Information System (INIS)

    Chang, Sunyoung; Jeong, Yon Hong; Han, Jae-Jun; Lee, Aeri; Hwang, Yong-Soo

    2015-01-01

    The disposal facility of the spent nuclear fuel will be operated from 2051. This paper presents the ENVI code developed by GoldSim Software to simulate options for managing spent nuclear fuel (SNF) in South Korea. The ENVI is a simulator to allow decision-makers to assist to evaluate the performance for spent nuclear fuel management. The multiple options for managing the spent nuclear fuel including the storage and transportation are investigated into interim storage, permanent disposal in geological repositories and overseas and domestic reprocessing. The ENVI code uses the GoldSim software to simulate the logistics of the associated activities. The result by the ENVI model not only produces the total cost to compare among the multiple options but also predict the sizes and timings of different facilities required. In order to decide the policy for spent nuclear management this purpose of this paper is to draw the optimum management plan to solve the nuclear spent fuel issue in the economical aspects. This paper is focused on the development of the ENVI's logic and calculations to simulate four options(No Reprocessing, Overseas Reprocessing, Domestic Reprocessing, and Overseas and Domestic Reprocessing) for managing the spent nuclear fuel in South Korea. The time history of the spent nuclear fuel produced from both the existing and future NPP's can be predicted, based on the Goldsim software made available very user friendly model. The simulation result will be used to suggest the strategic plans for the spent nuclear fuel management

  13. Basis and application of MATLAB

    International Nuclear Information System (INIS)

    Shin, Chun Sik; An, Yeong Ju; Byun, Gi Sik; Lee, Hyeong Gi

    1998-01-01

    This book introduces MATLAB, which deals with operation and basic function, MATLAB programming like for, if, else, while and script file, equation, calculation and interpolation, operation of the matrix, file management function, such as basic file management function input-output of internal file of MATLAB input-output of outer file of MATLAB, basic graph function, two-dimensional graph and three-dimensional graph and other graph function debugger of MATLAB program in 4.2 version and debugger of MATLAB in 5.1 version.

  14. Leveling up and down: the experiences of benign and malicious envy.

    Science.gov (United States)

    van de Ven, Niels; Zeelenberg, Marcel; Pieters, Rik

    2009-06-01

    Envy is the painful emotion caused by the good fortune of others. This research empirically supports the distinction between two qualitatively different types of envy, namely benign and malicious envy. It reveals that the experience of benign envy leads to a moving-up motivation aimed at improving one's own position, whereas the experience of malicious envy leads to a pulling-down motivation aimed at damaging the position of the superior other. Study 1 used guided recall of the two envy types in a culture (the Netherlands) that has separate words for benign and malicious envy. Analyses of the experiential content of these emotions found the predicted differences. Study 2 and 3 used one sample from the United States and one from Spain, respectively, where a single word exists for both envy types. A latent class analysis based on the experiential content of envy confirmed the existence of separate experiences of benign and malicious envy in both these cultures as well. The authors discuss the implications of distinguishing the two envy types for theories of cooperation, group performance, and Schadenfreude.

  15. DACE - A Matlab Kriging Toolbox

    DEFF Research Database (Denmark)

    2002-01-01

    DACE, Design and Analysis of Computer Experiments, is a Matlab toolbox for working with kriging approximations to computer models.......DACE, Design and Analysis of Computer Experiments, is a Matlab toolbox for working with kriging approximations to computer models....

  16. Matlab Based LOCO

    International Nuclear Information System (INIS)

    Portmann, Greg; Safranek, James; Huang, Xiaobiao

    2011-01-01

    The LOCO algorithm has been used by many accelerators around the world. Although the uses for LOCO vary, the most common use has been to find calibration errors and correct the optics functions. The light source community in particular has made extensive use of the LOCO algorithms to tightly control the beta function and coupling. Maintaining high quality beam parameters requires constant attention so a relatively large effort was put into software development for the LOCO application. The LOCO code was originally written in FORTRAN. This code worked fine but it was somewhat awkward to use. For instance, the FORTRAN code itself did not calculate the model response matrix. It required a separate modeling code such as MAD to calculate the model matrix then one manually loads the data into the LOCO code. As the number of people interested in LOCO grew, it required making it easier to use. The decision to port LOCO to Matlab was relatively easy. It's best to use a matrix programming language with good graphics capability; Matlab was also being used for high level machine control; and the accelerator modeling code AT, (5), was already developed for Matlab. Since LOCO requires collecting and processing a relative large amount of data, it is very helpful to have the LOCO code compatible with the high level machine control, (3). A number of new features were added while porting the code from FORTRAN and new methods continue to evolve, (7)(9). Although Matlab LOCO was written with AT as the underlying tracking code, a mechanism to connect to other modeling codes has been provided.

  17. The tango of two deadly sins: The social-functional relation of envy and pride.

    Science.gov (United States)

    Lange, Jens; Crusius, Jan

    2015-09-01

    Envy stems from a social comparison with a superior standard. Its 2 distinct forms are directed at changing this situation in different ways, either by becoming as successful as the envied person (in benign envy) or by lowering the envied person's advantage (in malicious envy). In essence, envy is thus a social phenomenon. Nevertheless, most previous research has focused on its underlying intrapersonal processes, overlooking envy's interpersonal core. In contrast, we show in 6 studies (N = 1,513) that envy and pride are intertwined in a social-functional relationship. Envy and pride often co-occur (Study 1) and pride displays enhance envious feelings (Studies 2 and 3). Specifically, authentic (success attributed to effort) and hubristic pride (success attributed to talent) modulate envious intentions and behavior toward their benign and malicious form (Study 2 to 6). This effect is mediated via liking, perceived prestige, and perceived dominance (Study 4). In accordance with a social-functional approach, the effects emerge only when authentic and hubristic pride are expressed by the superior person and not when the respective information about the superior person's feelings is simply available in the environment (Study 5). These effects are present when participants recall envy situations (Study 1), when they imagine being in a competitive situation (Studies 3, 4, and 5), or when envy is elicited in situ (Studies 2 and 6). Our findings show the value of studying envy as a social phenomenon and open up numerous avenues for research on envy at the interpersonal and intergroup level. (c) 2015 APA, all rights reserved).

  18. Warding off the evil eye: when the fear of being envied increases prosocial behavior.

    Science.gov (United States)

    van de Ven, Niels; Zeelenberg, Marcel; Pieters, Rik

    2010-11-01

    The fear of being envied makes people act prosocially, in an attempt to ward off the potentially destructive effects of envy. In three experiments, people who were in a superior position and could be envied were more likely than control participants to give time-consuming advice to a potentially envious person or to help a potentially envious person pick up erasers she had accidentally scattered. However, helping behavior increased only if envy was likely to be malicious rather than benign. People who were better off did not increase their helping behavior toward people in general, but increased their helping only toward the potentially envious. This finding is consistent with the idea that the better off act more prosocially as an appeasement strategy. The fear of being envied serves useful group functions, because it triggers prosocial behavior that is likely to dampen the potentially destructive effects of envy and simultaneously helps to improve the situation of people who are worse off.

  19. On the counterfactual nature of envy: "It could have been me".

    Science.gov (United States)

    van de Ven, Niels; Zeelenberg, Marcel

    2015-01-01

    We examined whether counterfactual thinking influences the experience of envy. Counterfactual thinking refers to comparing the situation as it is to what it could have been, and these thought processes have been shown to lead to a variety of emotions. We predicted that for envy the counterfactual thought "it could have been me" would be important. In four studies we found a clear link between such counterfactual thoughts and the intensity of envy. Furthermore, Studies 3 and 4 revealed that a manipulation known to affect the extent of counterfactual thinking (the perception of being close to obtaining the desired outcome oneself), had an effect on the intensity of envy via counterfactual thoughts. This relationship between counterfactual thinking and the experience of envy allows for new predictions concerning situations under which envy is likely be more intense.

  20. Cosmology with MATLAB

    CERN Document Server

    Green, Dan

    2016-01-01

    This volume makes explicit use of the synergy between cosmology and high energy physics, for example, supersymmetry and dark matter, or nucleosynthesis and the baryon-to-photon ratio. In particular the exciting possible connection between the recently discovered Higgs scalar and the scalar field responsible for inflation is explored.The recent great advances in the accuracy of the basic cosmological parameters is exploited in that no free scale parameters such as h appear, rather the basic calculations are done numerically using all sources of energy density simultaneously. Scripts are provided that allow the reader to calculate exact results for the basic parameters. Throughout MATLAB tools such as symbolic math, numerical solutions, plots and 'movies' of the dynamical evolution of systems are used. The GUI package is also shown as an example of the real time manipulation of parameters which is available to the reader.All the MATLAB scripts are made available to the reader to explore examples of the uses of ...

  1. Effect of Gratitude on Benign and Malicious Envy: The Mediating Role of Social Support

    Science.gov (United States)

    Xiang, Yanhui; Chao, Xiaomei; Ye, Yanyan

    2018-01-01

    Gratitude has been investigated in various areas in psychology. The present research showed that gratitude had some positive effects on some aspects of our life, such as subjective well-being, life satisfaction, and social relationships. It can also help us relieve negative emotions. However, the existing literature has not studied the influence of gratitude on envy. The present study used structural equation modeling to test the mediating role of social support between gratitude and two types of envy (malicious and benign). We recruited 426 Chinese undergraduates to complete the Gratitude Questionnaire, Malicious and Benign Envy Scales, and the Multi-Dimensional Scale of Perceived Social Support. Results showed that gratitude positively predicted benign envy and negatively predicted malicious envy. In addition, the indirect effect of gratitude on two types of envy via social support was significant. These results revealed the direct relationship between gratitude and malicious/benign envy, and the mediating effect of social support, which will contribute to find effective measures to inhibit malicious envy and promote benign envy from the perspective of cultivating gratitude and increasing individuals' social support. PMID:29867595

  2. Effect of Gratitude on Benign and Malicious Envy: The Mediating Role of Social Support

    Directory of Open Access Journals (Sweden)

    Yanhui Xiang

    2018-05-01

    Full Text Available Gratitude has been investigated in various areas in psychology. The present research showed that gratitude had some positive effects on some aspects of our life, such as subjective well-being, life satisfaction, and social relationships. It can also help us relieve negative emotions. However, the existing literature has not studied the influence of gratitude on envy. The present study used structural equation modeling to test the mediating role of social support between gratitude and two types of envy (malicious and benign. We recruited 426 Chinese undergraduates to complete the Gratitude Questionnaire, Malicious and Benign Envy Scales, and the Multi-Dimensional Scale of Perceived Social Support. Results showed that gratitude positively predicted benign envy and negatively predicted malicious envy. In addition, the indirect effect of gratitude on two types of envy via social support was significant. These results revealed the direct relationship between gratitude and malicious/benign envy, and the mediating effect of social support, which will contribute to find effective measures to inhibit malicious envy and promote benign envy from the perspective of cultivating gratitude and increasing individuals' social support.

  3. Effect of Gratitude on Benign and Malicious Envy: The Mediating Role of Social Support.

    Science.gov (United States)

    Xiang, Yanhui; Chao, Xiaomei; Ye, Yanyan

    2018-01-01

    Gratitude has been investigated in various areas in psychology. The present research showed that gratitude had some positive effects on some aspects of our life, such as subjective well-being, life satisfaction, and social relationships. It can also help us relieve negative emotions. However, the existing literature has not studied the influence of gratitude on envy. The present study used structural equation modeling to test the mediating role of social support between gratitude and two types of envy (malicious and benign). We recruited 426 Chinese undergraduates to complete the Gratitude Questionnaire, Malicious and Benign Envy Scales, and the Multi-Dimensional Scale of Perceived Social Support. Results showed that gratitude positively predicted benign envy and negatively predicted malicious envy. In addition, the indirect effect of gratitude on two types of envy via social support was significant. These results revealed the direct relationship between gratitude and malicious/benign envy, and the mediating effect of social support, which will contribute to find effective measures to inhibit malicious envy and promote benign envy from the perspective of cultivating gratitude and increasing individuals' social support.

  4. Digital speech processing using Matlab

    CERN Document Server

    Gopi, E S

    2014-01-01

    Digital Speech Processing Using Matlab deals with digital speech pattern recognition, speech production model, speech feature extraction, and speech compression. The book is written in a manner that is suitable for beginners pursuing basic research in digital speech processing. Matlab illustrations are provided for most topics to enable better understanding of concepts. This book also deals with the basic pattern recognition techniques (illustrated with speech signals using Matlab) such as PCA, LDA, ICA, SVM, HMM, GMM, BPN, and KSOM.

  5. Matlab differential and integral calculus

    CERN Document Server

    Lopez, Cesar

    2014-01-01

    MATLAB is a high-level language and environment for numerical computation, visualization, and programming. Using MATLAB, you can analyze data, develop algorithms, and create models and applications. The language, tools, and built-in math functions enable you to explore multiple approaches and reach a solution faster than with spreadsheets or traditional programming languages, such as C/C++ or Java. MATLAB Differential and Integral Calculus introduces you to the MATLAB language with practical hands-on instructions and results, allowing you to quickly achieve your goals. In addition to givi

  6. Matlab programming for numerical analysis

    CERN Document Server

    Lopez, Cesar

    2014-01-01

    MATLAB is a high-level language and environment for numerical computation, visualization, and programming. Using MATLAB, you can analyze data, develop algorithms, and create models and applications. The language, tools, and built-in math functions enable you to explore multiple approaches and reach a solution faster than with spreadsheets or traditional programming languages, such as C/C++ or Java. Programming MATLAB for Numerical Analysis introduces you to the MATLAB language with practical hands-on instructions and results, allowing you to quickly achieve your goals. You will first become

  7. Perancangan Kendali Pid Dengan Matlab

    OpenAIRE

    Sukamta, Sri

    2010-01-01

    Perancangan PID Controller selama ini menggunakan metoda trial and error dengan perhitungan yangmemakan waktu lama. MatLab yang dilengkapi Control Toolbox, membantu perancang untuk melihatrespon berbagai kombinasi konstanta dengan variasi input yang berbeda. Penggunaan MatLab ini sangatmembantu perancang dalam menentukan kombinasi di antara P, I, dan D Controller untuk menghasilkansistem pengaturan yang baik dan sederhana.

  8. Matpar: Parallel Extensions for MATLAB

    Science.gov (United States)

    Springer, P. L.

    1998-01-01

    Matpar is a set of client/server software that allows a MATLAB user to take advantage of a parallel computer for very large problems. The user can replace calls to certain built-in MATLAB functions with calls to Matpar functions.

  9. The GMT/MATLAB Toolbox

    Science.gov (United States)

    Wessel, Paul; Luis, Joaquim F.

    2017-02-01

    The GMT/MATLAB toolbox is a basic interface between MATLAB® (or Octave) and GMT, the Generic Mapping Tools, which allows MATLAB users full access to all GMT modules. Data may be passed between the two programs using intermediate MATLAB structures that organize the metadata needed; these are produced when GMT modules are run. In addition, standard MATLAB matrix data can be used directly as input to GMT modules. The toolbox improves interoperability between two widely used tools in the geosciences and extends the capability of both tools: GMT gains access to the powerful computational capabilities of MATLAB while the latter gains the ability to access specialized gridding algorithms and can produce publication-quality PostScript-based illustrations. The toolbox is available on all platforms and may be downloaded from the GMT website.

  10. The emotional responses of browsing Facebook: Happiness, envy, and the role of tie strength.

    Science.gov (United States)

    Lin, Ruoyun; Utz, Sonja

    2015-11-01

    On Facebook, users are exposed to posts from both strong and weak ties. Even though several studies have examined the emotional consequences of using Facebook, less attention has been paid to the role of tie strength. This paper aims to explore the emotional outcomes of reading a post on Facebook and examine the role of tie strength in predicting happiness and envy. Two studies - one correlational, based on a sample of 207 American participants and the other experimental, based on a sample of 194 German participants - were conducted in 2014. In Study 2, envy was further distinguished into benign and malicious envy. Based on a multi-method approach, the results showed that positive emotions are more prevalent than negative emotions while browsing Facebook. Moreover, tie strength is positively associated with the feeling of happiness and benign envy, whereas malicious envy is independent of tie strength after reading a (positive) post on Facebook.

  11. The cognitive consequences of envy: attention, memory, and self-regulatory depletion.

    Science.gov (United States)

    Hill, Sarah E; DelPriore, Danielle J; Vaughan, Phillip W

    2011-10-01

    In a series of 4 experiments, we provide evidence that--in addition to having an affective component--envy may also have important consequences for cognitive processing. Our first experiment (N = 69) demonstrated that individuals primed with envy better attended to and more accurately recalled information about fictitious peers than did a control group. Studies 2 (N = 187) and 3 (N = 65) conceptually replicated these results, demonstrating that envy elicited by targets predicts attention and later memory for information about them. We demonstrate that these effects cannot be accounted for by admiration or changes in negative affect or arousal elicited by the targets. Study 4 (N = 152) provides evidence that greater memory for envied--but not neutral--targets leads to diminished perseverance on a difficult anagram task. Findings demonstrate that envy may play an important role in attention and memory systems and deplete limited self-regulatory resources available for acts of volition. 2011 APA, all rights reserved

  12. KALMTOOL for use with MATLAB

    DEFF Research Database (Denmark)

    Nørgaard, Peter Magnus; Ravn, Ole; Poulsen, Niels Kjølstad

    2003-01-01

    The KALMTOOL toolbox is a set of MATLAB tools for state estimation for nonlinear systems. The toolbox contains functions for extended Kalman filtering as well as for two new filters called the DD1 filter and the DD2 filter. The toolbox specifically addresses the problem of not having observations...... available at all sampling instants. All functions are available as m-functions but for faster (much faster!) execution, the DD1 and DD2 filters are also available as C Mex files for MATLAB under Windows and Linux. The toolbox requires MATLAB 6. No additional toolboxes are required....

  13. Effects of anger, guilt, and envy on moral hypocrisy.

    Science.gov (United States)

    Polman, Evan; Ruttan, Rachel L

    2012-01-01

    In the current article the authors examined the impact of specific emotions on moral hypocrisy, the tendency among people to judge others more severely than they judge themselves. In two studies, they found that (a) anger increased moral hypocrisy, (b) guilt eliminated moral hypocrisy, and (c) envy reversed moral hypocrisy. In particular, these findings were observed in two domains. In Study 1, participants responded to moral dilemmas describing unethical behavior and rated how acceptable it would be if others engaged in the unethical behavior, or alternatively, if they themselves engaged in the unethical behavior. In Study 2, participants were asked how much they would like to donate to research on cancer, or alternatively, how much they think others should donate. The results demonstrate that specific emotions influence moral decision making, even when real money is at stake, and that emotions of the same valence have opposing effects on moral judgment.

  14. Une introduction à MATLAB c

    OpenAIRE

    CREMONA, Christian; LABORATOIRE CENTRAL DES PONTS ET CHAUSSEES - LCPC

    2002-01-01

    MATLAB c présente toutes les fonctionnalités des approches récentes de la programmation : programmation objet basée sur des hiérarchies de classes, programmation événementielle du graphisme. MATLAB c présente une aide en ligne très complète sous format html des différentes fontions accessibles. COMPTE RENDU DE RECHERCHE

  15. Statistics in Matlab a primer

    CERN Document Server

    Cho, MoonJung

    2014-01-01

    List of Tables Preface MATLAB BasicsDesktop Environment Getting Help and Other Documentation Data Import and Export Data I/O via the Command Line The Import Wizard Examples of Data I/O in MATLAB Data I/O with the Statistics Toolbox More Functions for Data I/O Data in MATLAB Data Objects in Base MATLAB Accessing Data Elements Examples of Joining Data Sets Data Types in the Statistics Toolbox Object-Oriented Programming Miscellaneous Topics File and Workspace Management Punctuation in MATLAB Arithmetic Operators Functions in MATLAB Summary and Further Reading Visualizing DataBasic Plot Functions Plotting 2-D Data Plotting 3-D Data Examples Scatter Plots Basic 2-D and 3-D Scatter Plots Scatter Plot Matrix Examples GUIs for Graphics Simple Plot Editing Plotting Tools Interface PLOTS Tab Summary and Further Reading Descriptive StatisticsMeasures of Location Means, Medians, and Modes Examples Measures of Dispersion Range Variance and Standard Deviation Covariance and Correlation Examples Describing the Distribution...

  16. Effect of leader-member exchange on employee envy and work behavior moderated by self-esteem and neuroticism

    Directory of Open Access Journals (Sweden)

    Chin-Yi Shu

    2017-04-01

    Full Text Available This study investigates the impact of leader-member exchange (LMX on envy in the workplace and the subsequent effects of envy on work engagement and socially undermining behavior. In addition, the moderating roles of personality traits, such as self-esteem and neuroticism, are examined in this relationship. Paired questionnaires were personally collected from 245 subordinates and 82 of their immediate supervisors. Empirical analysis of the responses revealed: (a the quality of LMX is negatively related to employee envy in the workplace, (b employee envy mediates the relationship between LMX and work engagement, (c self-esteem boosts the relationship between envy and work engagement, but decreases the relationship between envy and social undermining, and (d neuroticism exacerbates the relationship between envy and social undermining.

  17. Test Generator for MATLAB Simulations

    Science.gov (United States)

    Henry, Joel

    2011-01-01

    MATLAB Automated Test Tool, version 3.0 (MATT 3.0) is a software package that provides automated tools that reduce the time needed for extensive testing of simulation models that have been constructed in the MATLAB programming language by use of the Simulink and Real-Time Workshop programs. MATT 3.0 runs on top of the MATLAB engine application-program interface to communicate with the Simulink engine. MATT 3.0 automatically generates source code from the models, generates custom input data for testing both the models and the source code, and generates graphs and other presentations that facilitate comparison of the outputs of the models and the source code for the same input data. Context-sensitive and fully searchable help is provided in HyperText Markup Language (HTML) format.

  18. Introducing a model of organizational envy management among university faculty members: A mixed research approach

    Directory of Open Access Journals (Sweden)

    Maris Zarin Daneshvar

    2016-01-01

    Full Text Available The present study aimed at offering a model of organizational envy management among faculty members of Islamic Azad Universities of East Azerbaijan Province. A mixed method through involving qualitative data and then quantitative data emphasizing on quantitative analysis. Population of the study was the entire faculty members with associate or higher degree in the educational year of 2014-2015. In the qualitative stage 20 individuals (experts were selected to design the primary model and questionnaire, and to fit the model 316 faculty members were selected. In the qualitative section it was specified that influential variables on envy management in faculty members are health organizational climate, spiritual leadership, effective communication, job satisfaction and professional development of professors and approved, as well in the quantitative section findings showed that there is a significant relationship between effective variables so that in indirect analysis of effect of organizational climate on envy management, the variable of spiritual leadership via the variable of effective communication had little effect on envy management than variables of professional development and job satisfaction. It is concluded that university managers should provide conditions and backgrounds of envy management in the universities and enable professors for more effective roles without envy in the scientific climate of university to achieve in educational, research and servicing efficiency.

  19. Signals and systems with MATLAB

    CERN Document Server

    Yang, Won Young; Song, Ik H; Cho, Yong S

    2009-01-01

    Covers some of the theoretical foundations and mathematical derivations that can be used in higher-level related subjects such as signal processing, communication, and control, minimizing the mathematical difficulty and computational burden. This book illustrates the usage of MATLAB and Simulink for signal and system analysis and design.

  20. Matlab Software for Spatial Panels

    NARCIS (Netherlands)

    Elhorst, J.Paul

    2014-01-01

    Elhorst provides Matlab routines to estimate spatial panel data models at his website. This article extends these routines to include the bias correction procedure proposed by Lee and Yu if the spatial panel data model contains spatial and/or time-period fixed effects, the direct and indirect

  1. A lesion model of envy and Schadenfreude: legal, deservingness and moral dimensions as revealed by neurodegeneration

    Science.gov (United States)

    Santamaría-García, Hernando; Baez, Sandra; Reyes, Pablo; Santamaría-García, José A; Santacruz-Escudero, José M; Matallana, Diana; Arévalo, Analía; Sigman, Mariano; García, Adolfo M; Ibáñez, Agustín

    2017-01-01

    Abstract The study of moral emotions (i.e. Schadenfreude and envy) is critical to understand the ecological complexity of everyday interactions between cognitive, affective, and social cognition processes. Most previous studies in this area have used correlational imaging techniques and framed Schadenfreude and envy as unified and monolithic emotional domains. Here, we profit from a relevant neurodegeneration model to disentangle the brain regions engaged in three dimensions of Schadenfreude and envy: deservingness, morality, and legality. We tested a group of patients with behavioural variant frontotemporal dementia (bvFTD), patients with Alzheimer’s disease, as a contrastive neurodegeneration model, and healthy controls on a novel task highlighting each of these dimensions in scenarios eliciting Schadenfreude and envy. Compared with the Alzheimer’s disease and control groups, patients with bvFTD obtained significantly higher scores on all dimensions for both emotions. Correlational analyses revealed an association between envy and Schadenfreude scores and greater deficits in social cognition, inhibitory control, and behaviour disturbances in bvFTD patients. Brain anatomy findings (restricted to bvFTD and controls) confirmed the partially dissociable nature of the moral emotions’ experiences and highlighted the importance of socio-moral brain areas in processing those emotions. In all subjects, an association emerged between Schadenfreude and the ventral striatum, and between envy and the anterior cingulate cortex. In addition, the results supported an association between scores for moral and legal transgression and the morphology of areas implicated in emotional appraisal, including the amygdala and the parahippocampus. By contrast, bvFTD patients exhibited a negative association between increased Schadenfreude and envy across dimensions and critical regions supporting social-value rewards and social-moral processes (dorsolateral prefrontal cortex, angular

  2. A lesion model of envy and Schadenfreude: legal, deservingness and moral dimensions as revealed by neurodegeneration.

    Science.gov (United States)

    Santamaría-García, Hernando; Baez, Sandra; Reyes, Pablo; Santamaría-García, José A; Santacruz-Escudero, José M; Matallana, Diana; Arévalo, Analía; Sigman, Mariano; García, Adolfo M; Ibáñez, Agustín

    2017-12-01

    The study of moral emotions (i.e. Schadenfreude and envy) is critical to understand the ecological complexity of everyday interactions between cognitive, affective, and social cognition processes. Most previous studies in this area have used correlational imaging techniques and framed Schadenfreude and envy as unified and monolithic emotional domains. Here, we profit from a relevant neurodegeneration model to disentangle the brain regions engaged in three dimensions of Schadenfreude and envy: deservingness, morality, and legality. We tested a group of patients with behavioural variant frontotemporal dementia (bvFTD), patients with Alzheimer's disease, as a contrastive neurodegeneration model, and healthy controls on a novel task highlighting each of these dimensions in scenarios eliciting Schadenfreude and envy. Compared with the Alzheimer's disease and control groups, patients with bvFTD obtained significantly higher scores on all dimensions for both emotions. Correlational analyses revealed an association between envy and Schadenfreude scores and greater deficits in social cognition, inhibitory control, and behaviour disturbances in bvFTD patients. Brain anatomy findings (restricted to bvFTD and controls) confirmed the partially dissociable nature of the moral emotions' experiences and highlighted the importance of socio-moral brain areas in processing those emotions. In all subjects, an association emerged between Schadenfreude and the ventral striatum, and between envy and the anterior cingulate cortex. In addition, the results supported an association between scores for moral and legal transgression and the morphology of areas implicated in emotional appraisal, including the amygdala and the parahippocampus. By contrast, bvFTD patients exhibited a negative association between increased Schadenfreude and envy across dimensions and critical regions supporting social-value rewards and social-moral processes (dorsolateral prefrontal cortex, angular gyrus and

  3. Solving applied mathematical problems with Matlab

    CERN Document Server

    Xue, Dingyu

    2008-01-01

    Computer Mathematics Language-An Overview. Fundamentals of MATLAB Programming. Calculus Problems. MATLAB Computations of Linear Algebra Problems. Integral Transforms and Complex Variable Functions. Solutions to Nonlinear Equations and Optimization Problems. MATLAB Solutions to Differential Equation Problems. Solving Interpolations and Approximations Problems. Solving Probability and Mathematical Statistics Problems. Nontraditional Solution Methods for Mathematical Problems.

  4. Digital signal processing using MATLAB

    CERN Document Server

    Schilling, Robert L

    2016-01-01

    Focus on the development, implementation, and application of modern DSP techniques with DIGITAL SIGNAL PROCESSING USING MATLAB(R), 3E. Written in an engaging, informal style, this edition immediately captures your attention and encourages you to explore each critical topic. Every chapter starts with a motivational section that highlights practical examples and challenges that you can solve using techniques covered in the chapter. Each chapter concludes with a detailed case study example, a chapter summary with learning outcomes, and practical homework problems cross-referenced to specific chapter sections for your convenience. DSP Companion software accompanies each book to enable further investigation. The DSP Companion software operates with MATLAB(R) and provides intriguing demonstrations as well as interactive explorations of analysis and design concepts.

  5. MatLab 1b

    DEFF Research Database (Denmark)

    Kristiansen, Heidi; Kaas, Thomas; Freil, Ole

    Bogen indeholder fire kapitler: ’Tal i spil’, ’Spejlinger og mønstre’, ’Mønstre med farver, figurer og tal’ og ’Længde og vægt’. MATLAB: •bygger på en undersøgende og problemorienteret tilgang til matematikken •understøtter læringsmålstyret undervisning •har fokus på faglige samtaler og undersøge......Bogen indeholder fire kapitler: ’Tal i spil’, ’Spejlinger og mønstre’, ’Mønstre med farver, figurer og tal’ og ’Længde og vægt’. MATLAB: •bygger på en undersøgende og problemorienteret tilgang til matematikken •understøtter læringsmålstyret undervisning •har fokus på faglige samtaler og...

  6. Computational colour science using MATLAB

    CERN Document Server

    Westland, Stephen; Cheung, Vien

    2012-01-01

    Computational Colour Science Using MATLAB 2nd Edition offers a practical, problem-based approach to colour physics. The book focuses on the key issues encountered in modern colour engineering, including efficient representation of colour information, Fourier analysis of reflectance spectra and advanced colorimetric computation. Emphasis is placed on the practical applications rather than the techniques themselves, with material structured around key topics. These topics include colour calibration of visual displays, computer recipe prediction and models for colour-appearance prediction. Each t

  7. MatLab 1a

    DEFF Research Database (Denmark)

    Kristiansen, Heidi; Kaas, Thomas; Freil, Ole

    Bogen indeholder fire kapitler: ’Tæl og brug tal’, ’Undersøg figurer’, ’Plus- og minusproblemer’ og ’Statistik og chance’. MATLAB: •bygger på en undersøgende og problemorienteret tilgang til matematikken •understøtter læringsmålstyret undervisning •har fokus på faglige samtaler og undersøgelser...

  8. MatLab 0. Matematiklaboratoriet

    DEFF Research Database (Denmark)

    Kristiansen, Heidi; Kaas, Thomas; Freil, Ole

    Bogen indeholder fem kapitler: ’Tælle og tal’, ’Figurer og mønstre’, ’Hvor mange?’, ’Måling’ og ’Data og diagrammer’. MATLAB: •bygger på en undersøgende og problemorienteret tilgang til matematikken •understøtter læringsmålstyret undervisning •har fokus på faglige samtaler og undersøgelser, der...

  9. Penis Envy and the Female Oedipus Complex: A Plea to Reawaken an Ineffectual Debate.

    Science.gov (United States)

    Zepf, Siegfried; Seel, Dietmar

    2016-06-01

    Going along with Laplanche's assumption that there is no endogenous sexuality, the authors discuss Freud's concepts of the female Oedipus complex and penis envy and some of its proposed alternatives. The female oedipal conflict turns out to be the outcome of a projective identification with the Oedipus complexes of the mother and father. In the context of the rivalry with the mother, penis envy refers to the maternal power over the father's penis that the daughter wants to have in herself, while, in the context of the rivalry with the father, penis envy arises from the jealousy of the father's penis that the daughter believes is necessary to have on herself in order to satisfy her mother. The authors conclude that in Freud's day such insights were already available, which might have culminated in the conceptualization they present in this paper.

  10. Projecting my envy onto you: neurocognitive mechanisms of an offline emotional egocentricity bias.

    Science.gov (United States)

    Steinbeis, Nikolaus; Singer, Tania

    2014-11-15

    Humans often project their own beliefs, desires and emotions onto others, indicating an inherent egocentrism. In five studies we investigated the neurocognitive mechanisms underlying emotional egocentricity bias (EEB) and specifically an offline EEB, defined as the projection of one's own tendency to react with a certain emotional response pattern in a given situation onto other people. We used a competitive reaction time game associated with monetary gains and losses that allowed inducing feelings of envy and Schadenfreude. While we found evidence for the first hand experience of envy and Schadenfreude, we also observed an offline bias, that is participants on average projected feelings of envy and Schadenfreude when having to judge others. Importantly the extent of experienced and projected social emotions were highly correlated. This bias was observed when participants were both directly involved and also as an uninvolved party, suggesting the offline bias to be independent of the presently experienced emotion. Under increased time pressure however an online bias emerged whereby participants just projected their presently experienced emotions onto the other. Finally, we show that on the neural level shared neuronal networks underlie the offline EEB at least for envy. Thus, for envy, activity of the same part of anterior insula was sensitive to individual differences both in the experience and the projection of envy. These findings outline the set of circumstances leading to specific types of empathic attribution biases and show that individual differences in the experience of social emotions are predictive of the offline egocentricity bias both on a behavioral as well as a neural level. These data extend present models on the neurocognitive mechanisms of interpersonal understanding in the socio-affective domain. Copyright © 2014 Elsevier Inc. All rights reserved.

  11. A MATLAB companion for multivariable calculus

    CERN Document Server

    Cooper, Jeffery

    2001-01-01

    Offering a concise collection of MatLab programs and exercises to accompany a third semester course in multivariable calculus, A MatLab Companion for Multivariable Calculus introduces simple numerical procedures such as numerical differentiation, numerical integration and Newton''s method in several variables, thereby allowing students to tackle realistic problems. The many examples show students how to use MatLab effectively and easily in many contexts. Numerous exercises in mathematics and applications areas are presented, graded from routine to more demanding projects requiring some programming. Matlab M-files are provided on the Harcourt/Academic Press web site at http://www.harcourt-ap.com/matlab.html.* Computer-oriented material that complements the essential topics in multivariable calculus* Main ideas presented with examples of computations and graphics displays using MATLAB * Numerous examples of short code in the text, which can be modified for use with the exercises* MATLAB files are used to implem...

  12. Vicious circles of punishment: a reading of Melanie Klein's Envy and gratitude.

    Science.gov (United States)

    Smith, Henry F

    2008-01-01

    Staged as a moral drama, Melanie Klein's Envy and Gratitude (1957) straddles two eras: one reflecting a simpler more concrete, historical method, and the other an approach of greater complexity, focused on the transferential moment. Embedded within the transference are the vicious circles of envy and punishment that are the hallmark of Klein's text. Punishment itself which is always punishment of both self and other, creates its own vicious circle, set in motion by a single act. In the sadomasochistic enactments that result, the moral force of Klein's categories fuels the countertransference. A detailed clinical hour is presented.

  13. Matlab modeling of ITER CODAC

    International Nuclear Information System (INIS)

    Pangione, L.; Lister, J.B.

    2008-01-01

    The ITER CODAC (COntrol, Data Access and Communication) conceptual design resulted from 2 years of activity. One result was a proposed functional partitioning of CODAC into different CODAC Systems, each of them partitioned into other CODAC Systems. Considering the large size of this project, simple use of human language assisted by figures would certainly be ineffective in creating an unambiguous description of all interactions and all relations between these Systems. Moreover, the underlying design is resident in the mind of the designers, who must consider all possible situations that could happen to each system. There is therefore a need to model the whole of CODAC with a clear and preferably graphical method, which allows the designers to verify the correctness and the consistency of their project. The aim of this paper is to describe the work started on ITER CODAC modeling using Matlab/Simulink. The main feature of this tool is the possibility of having a simple, graphical, intuitive representation of a complex system and ultimately to run a numerical simulation of it. Using Matlab/Simulink, each CODAC System was represented in a graphical and intuitive form with its relations and interactions through the definition of a small number of simple rules. In a Simulink diagram, each system was represented as a 'black box', both containing, and connected to, a number of other systems. In this way it is possible to move vertically between systems on different levels, to show the relation of membership, or horizontally to analyse the information exchange between systems at the same level. This process can be iterated, starting from a global diagram, in which only CODAC appears with the Plant Systems and the external sites, and going deeper down to the mathematical model of each CODAC system. The Matlab/Simulink features for simulating the whole top diagram encourage us to develop the idea of completing the functionalities of all systems in order to finally have a full

  14. Is envy harmful to a society's psychological health and wellbeing? A longitudinal study of 18,000 adults.

    Science.gov (United States)

    Mujcic, Redzo; Oswald, Andrew J

    2018-02-01

    Nearly 100 years ago, the philosopher and mathematician Bertrand Russell warned of the social dangers of widespread envy. One view of modern society is that it is systematically developing a set of institutions -- such as social media and new forms of advertising -- that make people feel inadequate and envious of others. If so, how might that be influencing the psychological health of our citizens? This paper reports the first large-scale longitudinal research into envy and its possible repercussions. The paper studies 18,000 randomly selected individuals over the years 2005, 2009, and 2013. Using measures of SF-36 mental health and psychological well-being, four main conclusions emerge. First, the young are especially susceptible. Levels of envy fall as people grow older. This longitudinal finding is consistent with a cross-sectional pattern noted recently by Nicole E. Henniger and Christine R. Harris, and with the theory of socioemotional regulation suggested by scholars such as Laura L. Carstensen. Second, using fixed-effects equations and prospective analysis, the analysis reveals that envy today is a powerful predictor of worse SF-36 mental health and well-being in the future. A change from the lowest to the highest level of envy, for example, is associated with a worsening of SF-36 mental health by approximately half a standard deviation (p < .001). Third, no evidence is found for the idea that envy acts as a useful motivator. Greater envy is associated with slower -- not higher -- growth of psychological well-being in the future. Nor is envy a predictor of later economic success. Fourth, the longitudinal decline of envy leaves unaltered a U-shaped age pattern of well-being from age 20 to age 70. These results are consistent with the idea that society should be concerned about institutions that stimulate large-scale envy. Copyright © 2018 Elsevier Ltd. All rights reserved.

  15. ECONOMIC MODELING PROCESSES USING MATLAB

    Directory of Open Access Journals (Sweden)

    Anamaria G. MACOVEI

    2008-06-01

    Full Text Available To study economic phenomena and processes using mathem atical modeling, and to determine the approximatesolution to a problem we need to choose a method of calculation and a numerical computer program, namely thepackage of programs MatLab. Any economic process or phenomenon is a mathematical description of h is behavior,and thus draw up an economic and mathematical model that has the following stages: formulation of the problem, theanalysis process modeling, the production model and design verification, validation and implementation of the model.This article is presented an economic model and its modeling is using mathematical equations and software packageMatLab, which helps us approximation effective solution. As data entry is considered the net cost, the cost of direct andtotal cost and the link between them. I presented the basic formula for determining the total cost. Economic modelcalculations were made in MatLab software package and with graphic representation of its interpretation of the resultsachieved in terms of our specific problem.

  16. Value chain envy : explaining new entry and vertical integration in popular music

    NARCIS (Netherlands)

    Mol, Joeri M.; Wijnberg, Nachoem M.

    2002-01-01

    The desirability of establishing a value chain at a particular stage in a value system can be considered to depend on the relation between the value that can be created and the value that can be captured at that particular stage. Value chain envy motivates firms to invade the more desirable stages

  17. Value Chain Envy: Explaining New Entry and Vertical Integration in Popular Music

    NARCIS (Netherlands)

    Mol, J.M.; Wijnberg, N.M.; Carroll, C.

    2005-01-01

    The concepts of value creation, value capture, and value protection are employed to explain new entry and vertical integration. It is posited that if, at one stage of the value system, the share of value captured is disproportionally higher than the share of value created, value chain envy will

  18. Value chain envy : Explaining new entry and vertical integration in popular music

    NARCIS (Netherlands)

    Mol, J.M.; Wijnberg, N.M.; Carroll, C.

    The concepts of value creation, value capture, and value protection are employed to explain new entry and vertical integration. It is posited that if, at one stage of the value system, the share of value captured is disproportionally higher than the share of value created, value chain envy will

  19. Psychopathological Processes Involved in Social Comparison, Depression, and Envy on Facebook

    Directory of Open Access Journals (Sweden)

    Aurel Pera

    2018-01-01

    Full Text Available Is Facebook utilization beneficial or detrimental for psychological well-being? I draw on outstanding research (e.g., Chou and Edge, 2012; Lin and Utz, 2015; Appel et al., 2016; Ehrenreich and Underwood, 2016; Vogel and Rose, 2016; Hu et al., 2017 to substantiate that examining other individuals’ positively presented material on Facebook may have detrimental consequences. Increasing comparisons on Facebook may generate feelings of envy, the latter being a significant process determining the effect of growing social comparison on psychological well-being. To date, there is an increasing body of literature investigating the psychological consequences of Facebook usage, the function of relationship closeness in producing the feelings of contentment and envy, the impacts of exposure to positive content on Facebook, the link between envy and depression on Facebook, and the function of tie strength in expecting the emotional results of browsing Facebook. I am specifically interested in how previous research explored the consequences of Facebook use on psychological outcomes, the moderating function of envy in the link between Facebook use and reduced affective wellbeing, the psychological results of non-interactive Facebook conduct, and the role of relationship closeness in anticipating user’s contentment and envy after inspecting a post. A synthesis of the extant literature suggests that inspecting other individuals’ positive news on Facebook brings about contentment through emotional contagion, whereas negative news causes discomfort as a consequence of mood contagion, the transmissible effect being more powerful when the news is associated with a strong tie. The outcomes of this research back the argument that self-confidence and dispositional envy are instrumental in producing Facebook envy. These findings highlight that the emotional results of browsing Facebook are considerably affected by the substance of the comment, the personal

  20. Psychopathological Processes Involved in Social Comparison, Depression, and Envy on Facebook.

    Science.gov (United States)

    Pera, Aurel

    2018-01-01

    Is Facebook utilization beneficial or detrimental for psychological well-being? I draw on outstanding research (e.g., Chou and Edge, 2012; Lin and Utz, 2015; Appel et al., 2016; Ehrenreich and Underwood, 2016; Vogel and Rose, 2016; Hu et al., 2017) to substantiate that examining other individuals' positively presented material on Facebook may have detrimental consequences. Increasing comparisons on Facebook may generate feelings of envy, the latter being a significant process determining the effect of growing social comparison on psychological well-being. To date, there is an increasing body of literature investigating the psychological consequences of Facebook usage, the function of relationship closeness in producing the feelings of contentment and envy, the impacts of exposure to positive content on Facebook, the link between envy and depression on Facebook, and the function of tie strength in expecting the emotional results of browsing Facebook. I am specifically interested in how previous research explored the consequences of Facebook use on psychological outcomes, the moderating function of envy in the link between Facebook use and reduced affective wellbeing, the psychological results of non-interactive Facebook conduct, and the role of relationship closeness in anticipating user's contentment and envy after inspecting a post. A synthesis of the extant literature suggests that inspecting other individuals' positive news on Facebook brings about contentment through emotional contagion, whereas negative news causes discomfort as a consequence of mood contagion, the transmissible effect being more powerful when the news is associated with a strong tie. The outcomes of this research back the argument that self-confidence and dispositional envy are instrumental in producing Facebook envy. These findings highlight that the emotional results of browsing Facebook are considerably affected by the substance of the comment, the personal attributes of the Facebook user

  1. Psychopathological Processes Involved in Social Comparison, Depression, and Envy on Facebook

    Science.gov (United States)

    Pera, Aurel

    2018-01-01

    Is Facebook utilization beneficial or detrimental for psychological well-being? I draw on outstanding research (e.g., Chou and Edge, 2012; Lin and Utz, 2015; Appel et al., 2016; Ehrenreich and Underwood, 2016; Vogel and Rose, 2016; Hu et al., 2017) to substantiate that examining other individuals’ positively presented material on Facebook may have detrimental consequences. Increasing comparisons on Facebook may generate feelings of envy, the latter being a significant process determining the effect of growing social comparison on psychological well-being. To date, there is an increasing body of literature investigating the psychological consequences of Facebook usage, the function of relationship closeness in producing the feelings of contentment and envy, the impacts of exposure to positive content on Facebook, the link between envy and depression on Facebook, and the function of tie strength in expecting the emotional results of browsing Facebook. I am specifically interested in how previous research explored the consequences of Facebook use on psychological outcomes, the moderating function of envy in the link between Facebook use and reduced affective wellbeing, the psychological results of non-interactive Facebook conduct, and the role of relationship closeness in anticipating user’s contentment and envy after inspecting a post. A synthesis of the extant literature suggests that inspecting other individuals’ positive news on Facebook brings about contentment through emotional contagion, whereas negative news causes discomfort as a consequence of mood contagion, the transmissible effect being more powerful when the news is associated with a strong tie. The outcomes of this research back the argument that self-confidence and dispositional envy are instrumental in producing Facebook envy. These findings highlight that the emotional results of browsing Facebook are considerably affected by the substance of the comment, the personal attributes of the Facebook

  2. Menhir: An Environment for High Performance Matlab

    Directory of Open Access Journals (Sweden)

    Stéphane Chauveau

    1999-01-01

    Full Text Available In this paper we present Menhir a compiler for generating sequential or parallel code from the Matlab language. The compiler has been designed in the context of using Matlab as a specification language. One of the major features of Menhir is its retargetability to generate parallel and sequential C or Fortran code. We present the compilation process and the target system description for Menhir. Preliminary performances are given and compared with MCC, the MathWorks Matlab compiler.

  3. Cyclotron beam dynamic simulations in MATLAB

    International Nuclear Information System (INIS)

    Karamysheva, G.A.; Karamyshev, O.V.; Lepkina, O.E.

    2008-01-01

    MATLAB is useful for beam dynamic simulations in cyclotrons. Programming in an easy-to-use environment permits creation of models in a short space of time. Advanced graphical tools of MATLAB give good visualization features to created models. The beam dynamic modeling results with an example of two different cyclotron designs are presented. Programming with MATLAB opens wide possibilities of the development of the complex program, able to perform complete block of calculations for the design of the accelerators

  4. MatLab Script and Functional Programming

    Science.gov (United States)

    Shaykhian, Gholam Ali

    2007-01-01

    MatLab Script and Functional Programming: MatLab is one of the most widely used very high level programming languages for scientific and engineering computations. It is very user-friendly and needs practically no formal programming knowledge. Presented here are MatLab programming aspects and not just the MatLab commands for scientists and engineers who do not have formal programming training and also have no significant time to spare for learning programming to solve their real world problems. Specifically provided are programs for visualization. The MatLab seminar covers the functional and script programming aspect of MatLab language. Specific expectations are: a) Recognize MatLab commands, script and function. b) Create, and run a MatLab function. c) Read, recognize, and describe MatLab syntax. d) Recognize decisions, loops and matrix operators. e) Evaluate scope among multiple files, and multiple functions within a file. f) Declare, define and use scalar variables, vectors and matrices.

  5. Orthogonal transformations for change detection, Matlab code

    DEFF Research Database (Denmark)

    2005-01-01

    Matlab code to do multivariate alteration detection (MAD) analysis, maximum autocorrelation factor (MAF) analysis, canonical correlation analysis (CCA) and principal component analysis (PCA) on image data.......Matlab code to do multivariate alteration detection (MAD) analysis, maximum autocorrelation factor (MAF) analysis, canonical correlation analysis (CCA) and principal component analysis (PCA) on image data....

  6. Accelerator Modeling with MATLAB Accelerator Toolbox

    International Nuclear Information System (INIS)

    2002-01-01

    This paper introduces Accelerator Toolbox (AT)--a collection of tools to model storage rings and beam transport lines in the MATLAB environment. The objective is to illustrate the flexibility and efficiency of the AT-MATLAB framework. The paper discusses three examples of problems that are analyzed frequently in connection with ring-based synchrotron light sources

  7. Channel Access Client Toolbox for Matlab

    International Nuclear Information System (INIS)

    2002-01-01

    This paper reports on MATLAB Channel Access (MCA) Toolbox--MATLAB [1] interface to EPICS Channel Access (CA) client library. We are developing the toolbox for SPEAR3 accelerator controls, but it is of general use for accelerator and experimental physics applications programming. It is packaged as a MATLAB toolbox to allow easy development of complex CA client applications entirely in MATLAB. The benefits include: the ability to calculate and display parameters that use EPICS process variables as inputs, availability of MATLAB graphics tools for user interface design, and integration with the MATLABbased accelerator modeling software - Accelerator Toolbox [2-4]. Another purpose of this paper is to propose a feasible path to a synergy between accelerator control systems and accelerator simulation codes, the idea known as on-line accelerator model

  8. Methods for Georeferencing and Spectral Scaling of Remote Imagery using ArcView, ArcGIS, and ENVI

    Science.gov (United States)

    Remote sensing images can be used to support variable-rate (VR) application of material from aircraft. Geographic coordinates must be assigned to an image (georeferenced) so that the variable-rate system can determine where in the field to apply these inputs and adjust the system when a zone has bee...

  9. Methods for georectification and spectral scaling of remote imagery using ArcView, ArcGIS, and ENVI

    Science.gov (United States)

    Remote sensing images can be used to support variable-rate (VR) application of material from aircraft. Geographic coordinates must be assigned to an image (georeferenced) so that the variable-rate system can determine where in the field to apply these inputs and adjust the system when a zone has bee...

  10. Psychopathological Processes Involved in Social Comparison, Depression, and Envy on Facebook

    OpenAIRE

    Aurel Pera

    2018-01-01

    Is Facebook utilization beneficial or detrimental for psychological well-being? I draw on outstanding research (e.g., Chou and Edge, 2012; Lin and Utz, 2015; Appel et al., 2016; Ehrenreich and Underwood, 2016; Vogel and Rose, 2016; Hu et al., 2017) to substantiate that examining other individuals’ positively presented material on Facebook may have detrimental consequences. Increasing comparisons on Facebook may generate feelings of envy, the latter being a significant process determining the ...

  11. Parallelizing AT with MatlabMPI

    International Nuclear Information System (INIS)

    2011-01-01

    The Accelerator Toolbox (AT) is a high-level collection of tools and scripts specifically oriented toward solving problems dealing with computational accelerator physics. It is integrated into the MATLAB environment, which provides an accessible, intuitive interface for accelerator physicists, allowing researchers to focus the majority of their efforts on simulations and calculations, rather than programming and debugging difficulties. Efforts toward parallelization of AT have been put in place to upgrade its performance to modern standards of computing. We utilized the packages MatlabMPI and pMatlab, which were developed by MIT Lincoln Laboratory, to set up a message-passing environment that could be called within MATLAB, which set up the necessary pre-requisites for multithread processing capabilities. On local quad-core CPUs, we were able to demonstrate processor efficiencies of roughly 95% and speed increases of nearly 380%. By exploiting the efficacy of modern-day parallel computing, we were able to demonstrate incredibly efficient speed increments per processor in AT's beam-tracking functions. Extrapolating from prediction, we can expect to reduce week-long computation runtimes to less than 15 minutes. This is a huge performance improvement and has enormous implications for the future computing power of the accelerator physics group at SSRL. However, one of the downfalls of parringpass is its current lack of transparency; the pMatlab and MatlabMPI packages must first be well-understood by the user before the system can be configured to run the scripts. In addition, the instantiation of argument parameters requires internal modification of the source code. Thus, parringpass, cannot be directly run from the MATLAB command line, which detracts from its flexibility and user-friendliness. Future work in AT's parallelization will focus on development of external functions and scripts that can be called from within MATLAB and configured on multiple nodes, while

  12. MATLAB for Engineering and the Life Sciences

    CERN Document Server

    Tranquillo, Joseph

    2011-01-01

    In recent years, the life sciences have embraced simulation as an important tool in biomedical research. Engineers are also using simulation as a powerful step in the design process. In both arenas, Matlab has become the gold standard. It is easy to learn, flexible, and has a large and growing userbase. MATLAB for Engineering and the Life Sciences is a self-guided tour of the basic functionality of MATLAB along with the functions that are most commonly used in biomedical engineering and other life sciences. Although the text is written for undergraduates, graduate students and academics, those

  13. One hundred physics visualizations using Matlab

    CERN Document Server

    Green, Dan

    2014-01-01

    This book provides visualizations of many topics in general physics. The aim is to have an interactive MATLAB script wherein the user can vary parameters in a specific problem and then immediately see the outcome by way of dynamic movies of the response of the system in question. MATLAB tools are used throughout and the software scripts accompany the text in Symbolic Mathematics, Classical Mechanics, Electromagnetism, Waves and Optics, Gases and Fluid Flow, Quantum Mechanics, Special and General Relativity, and Astrophysics and Cosmology. The emphasis is on building up an intuition by running many different parametric choices chosen actively by the user and watching the subsequent behavior of the system. Physics books using MATLAB do not have the range or the intent of this text. They are rather steeped in technical detail. Symbolic math is used extensively and is integral to the aim of using MATLAB tools to accomplish the technical aspects of problem solving.

  14. An Accelerator control middle layer using Matlab

    CERN Document Server

    Portmann, G J; Terebilo, Andrei

    2005-01-01

    Matlab is a matrix manipulation language originally developed to be a convenient language for using the LINPACK and EISPACK libraries. What makes Matlab so appealing for accelerator physics is the combination of a matrix oriented programming language, an active workspace for system variables, powerful graphics capability, built-in math libraries, and platform independence. A number of software toolboxes for accelerators have been written in Matlab – the Accelerator Toolbox (AT) for machine simulations, LOCO for accelerator calibration, Matlab Channel Access Toolbox (MCA) for EPICS connections, and the Middle Layer. This paper will describe the MiddleLayer software toolbox that resides between the high-level control applications and the low-level accelerator control system. This software was a collaborative effort between ALS and Spear but was written to easily port. Five accelerators presently use this software – Spear, ALS, CLS, and the X-ray and VUV rings at Brookhaven. The Middle Layer fu...

  15. An introduction to differential equations using MATLAB

    CERN Document Server

    Butt, Rizwan

    2016-01-01

    An Introduction to Differential Equations using MATLAB exploits the symbolic, numerical, and graphical capabilitiesof MATLAB to develop a thorough understanding of differential equations algorithms. This book provides the readerwith numerous applications, m-files, and practical examples to problems. Balancing theoretical concepts withcomputational speed and accuracy, the book includes numerous short programs in MATLAB that can be used to solveproblems involving first-and higher-order differential equations, Laplace transforms, linear systems of differentialequations, numerical solutions of differential equations, computer graphics, and more. The author emphasizes thebasic ideas of analytical and numerical techniques and the uses of modern mathematical software (MATLAB) ratherthan relying only on complex mathematical derivations to engineers, mathematician, computer scientists, andphysicists or for use as a textbook in applied or computational courses.A CD-ROM with all the figures, codes, solutions, appendices...

  16. Learning Matlab a problem solving approach

    CERN Document Server

    Gander, Walter

    2015-01-01

    This comprehensive and stimulating introduction to Matlab, a computer language now widely used for technical computing, is based on an introductory course held at Qian Weichang College, Shanghai University, in the fall of 2014.  Teaching and learning a substantial programming language aren’t always straightforward tasks. Accordingly, this textbook is not meant to cover the whole range of this high-performance technical programming environment, but to motivate first- and second-year undergraduate students in mathematics and computer science to learn Matlab by studying representative problems, developing algorithms and programming them in Matlab. While several topics are taken from the field of scientific computing, the main emphasis is on programming. A wealth of examples are completely discussed and solved, allowing students to learn Matlab by doing: by solving problems, comparing approaches and assessing the proposed solutions.

  17. Linear algebra applications using Matlab software

    Directory of Open Access Journals (Sweden)

    Cornelia Victoria Anghel

    2005-10-01

    Full Text Available The paper presents two ways of special matrix generating using some functions included in the MatLab software package. The MatLab software package contains a set of functions that generate special matrixes used in the linear algebra applications and the signal processing from different activity fields. The paper presents two tipes of special matrixes that can be generated using written sintaxes in the dialog window of the MatLab software and for the command validity we need to press the Enter task. The applications presented in the paper represent eamples of numerical calculus using the MatLab software and belong to the scientific field „Computer Assisted Mathematics” thus creating the symbiosis between mathematics and informatics.

  18. MOCCASIN: converting MATLAB ODE models to SBML.

    Science.gov (United States)

    Gómez, Harold F; Hucka, Michael; Keating, Sarah M; Nudelman, German; Iber, Dagmar; Sealfon, Stuart C

    2016-06-15

    MATLAB is popular in biological research for creating and simulating models that use ordinary differential equations (ODEs). However, sharing or using these models outside of MATLAB is often problematic. A community standard such as Systems Biology Markup Language (SBML) can serve as a neutral exchange format, but translating models from MATLAB to SBML can be challenging-especially for legacy models not written with translation in mind. We developed MOCCASIN (Model ODE Converter for Creating Automated SBML INteroperability) to help. MOCCASIN can convert ODE-based MATLAB models of biochemical reaction networks into the SBML format. MOCCASIN is available under the terms of the LGPL 2.1 license (http://www.gnu.org/licenses/lgpl-2.1.html). Source code, binaries and test cases can be freely obtained from https://github.com/sbmlteam/moccasin : mhucka@caltech.edu More information is available at https://github.com/sbmlteam/moccasin. © The Author 2016. Published by Oxford University Press.

  19. A Matlab program for stepwise regression

    Directory of Open Access Journals (Sweden)

    Yanhong Qi

    2016-03-01

    Full Text Available The stepwise linear regression is a multi-variable regression for identifying statistically significant variables in the linear regression equation. In present study, we presented the Matlab program of stepwise regression.

  20. Visual media processing using Matlab beginner's guide

    CERN Document Server

    Siogkas, George

    2013-01-01

    Written in a friendly, Beginner's Guide format, showing the user how to use the digital media aspects of Matlab (image, video, sound) in a practical, tutorial-based style.This is great for novice programmers in any language who would like to use Matlab as a tool for their image and video processing needs, and also comes in handy for photographers or video editors with even less programming experience wanting to find an all-in-one tool for their tasks.

  1. MATLAB Software Versions and Licenses for the Peregrine System |

    Science.gov (United States)

    High-Performance Computing | NREL MATLAB Software Versions and Licenses for the Peregrine System MATLAB Software Versions and Licenses for the Peregrine System Learn about the MATLAB software Peregrine is R2017b. Licenses MATLAB is proprietary software. As such, users have access to a limited number

  2. CoC GIS Tools (GIS Tool)

    Data.gov (United States)

    Department of Housing and Urban Development — This tool provides a no-cost downloadable software tool that allows users to interact with professional quality GIS maps. Users access pre-compiled projects through...

  3. An Accelerator Control Middle Layer Using MATLAB

    International Nuclear Information System (INIS)

    Portmann, Gregory J.; Corbett, Jeff; Terebilo, Andrei

    2005-01-01

    Matlab is an interpretive programming language originally developed for convenient use with the LINPACK and EISPACK libraries. Matlab is appealing for accelerator physics because it is matrix-oriented, provides an active workspace for system variables, powerful graphics capabilities, built-in math libraries, and platform independence. A number of accelerator software toolboxes have been written in Matlab -- the Accelerator Toolbox (AT) for model-based machine simulations, LOCO for on-line model calibration, and Matlab Channel Access (MCA) to connect with EPICS. The function of the MATLAB ''MiddleLayer'' is to provide a scripting language for machine simulations and on-line control, including non-EPICS based control systems. The MiddleLayer has simplified and streamlined development of high-level applications including configuration control, energy ramp, orbit correction, photon beam steering, ID compensation, beam-based alignment, tune correction and response matrix measurement. The database-driven Middle Layer software is largely machine-independent and easy to port. Six accelerators presently use the software package with more scheduled to come on line soon

  4. A note on envy-free cake cutting with polynomial valuations

    DEFF Research Database (Denmark)

    Branzei, Simina

    2015-01-01

    number of players. The only existing finite envy-free cake cutting protocol for any number of players, designed by Brams and Taylor [4], has the property that its runtime can be made arbitrarily large by setting up the valuation functions of the players appropriately. Moreover, there is no closed formula...... that relates the valuation functions to the number of queries required by the protocol. In this note we show that when the valuations can be represented as polynomial functions, there exists a protocol in the standard query model that is much simpler conceptually and has a runtime bound depending...

  5. [Sibling relations from the family therapy perspective--support, attachment, rivalry and envy].

    Science.gov (United States)

    Cierpka, M

    2001-01-01

    In family therapy, during the last years more and more importance is attached to the dynamics of the sibling subsystem. In the present paper differences between them as well as similarities are discussed from the point of view of family theory. Relevant dimensions like support, attachment, rivalry and envy between brothers and sisters contribute essentially to the family dynamics. In this clinically orientated paper, we describe by means of a case example how the couple's conflicts after their separation is unconsciously repeated in the sibling subsystem. It is shown how the intergenerational dynamics can be interrupted by the initiative of the children and the initiated family therapy.

  6. Practical image and video processing using MATLAB

    CERN Document Server

    Marques, Oge

    2011-01-01

    "The book provides a practical introduction to the most important topics in image and video processing using MATLAB (and its Image Processing Toolbox) as a tool to demonstrate the most important techniques and algorithms. The contents are presented in a clear, technically accurate, objective way, with just enough mathematical detail. Most of the chapters are supported by figures, examples, illustrative problems, MATLAB scripts, suggestions for further reading, bibliographical references, useful Web sites, and exercises and computer projects to extend the understanding of their contents"--

  7. Aplikasi MATLAB untuk Mengenali Karakter Tulisan Tangan

    Directory of Open Access Journals (Sweden)

    ali mahmudi

    2017-03-01

    Full Text Available Handwriting recognition is one of the very interesting research object in the field of image processing, artificial intelligence and computer vision. This is due to the handwritten characters is varied in every individual. The style, size and orientation of handwriting characters has made every body’s is different, hence handwriting recognition is a very interesting research object. Handwriting recognition application has been used in quite many applications, such as reading the bank deposits, reading the postal code in letters, and helping peolple in managing documents. This paper presents a handwriting recognition application using Matlab. Matlab toolbox that is used in this research are Image Processing and Neural Network Toolbox.

  8. Intrapersonal characteristics of body-related guilt, shame, pride, and envy in Canadian adults.

    Science.gov (United States)

    Pila, Eva; Brunet, Jennifer; Crocker, Peter R E; Kowalski, Kent C; Sabiston, Catherine M

    2016-03-01

    This study examined differences in body-related shame, guilt, pride, and envy based on intrapersonal characteristics of sex, age, and weight status in 527 Canadian adults. Compared to men, women reported significantly higher shame and guilt contextualized to the body. No sex differences were observed for envy or pride. Middle-aged adults reported higher shame and lower pride compared with young adults, whereas no age differences were observed with body-related guilt. Meanwhile, shame and guilt were highest for individuals who had overweight or obese weight status, and pride was highest in individuals with average weight status. Overall, effect sizes were small and there were no significant interaction effects between sex, age, and weight status across body-related emotions. Further research is needed to capture similarities and differences of body-related self-conscious emotions between intrapersonal characteristics, to aid the development of intervention strategies to manage this important dimension of body image. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Radar signal analysis and processing using Matlab

    CERN Document Server

    Mahafza, Bassem R

    2008-01-01

    Offering radar-related software for the analysis and design of radar waveform and signal processing, this book provides comprehensive coverage of radar signals and signal processing techniques and algorithms. It contains numerous graphical plots, common radar-related functions, table format outputs, and end-of-chapter problems. The complete set of MATLAB[registered] functions and routines are available for download online.

  10. A Total Factor Productivity Toolbox for MATLAB

    NARCIS (Netherlands)

    B.M. Balk (Bert); J. Barbero (Javier); J.L. Zofío (José)

    2018-01-01

    textabstractTotal Factor Productivity Toolbox is a new package for MATLAB that includes functions to calculate the main Total Factor Productivity (TFP) indices and their decompositions, based on Shephard’s distance functions and using Data Envelopment Analysis (DEA) programming techniques. The

  11. How to Interface Fortran with Matlab

    OpenAIRE

    Sagastizábal , Claudia; Vige , Guillaume

    1995-01-01

    Projet PROMATH; We describe the general procedure for interfacing Fortran routines with Matlab. We explain how to write a mex-file and the associated gateway function. In particular, each different type of argument is considered in detail. We finish with an illustrative example

  12. An Accelerator Control Middle Layer Using MATLAB

    International Nuclear Information System (INIS)

    Portmann, Gregory J.; Corbett, Jeff; Terebilo, Andrei

    2005-01-01

    Matlab is a matrix manipulation language originally developed to be a convenient language for using the LINPACK and EISPACK libraries. What makes Matlab so appealing for accelerator physics is the combination of a matrix oriented programming language, an active workspace for system variables, powerful graphics capability, built-in math libraries, and platform independence. A number of software toolboxes for accelerators have been written in Matlab--the Accelerator Toolbox (AT) for machine simulations, LOCO for accelerator calibration, Matlab Channel Access Toolbox (MCA) for EPICS connections, and the Middle Layer. This paper will describe the ''middle layer'' software toolbox that resides between the high-level control applications and the low-level accelerator control system. This software was a collaborative effort between ALS (LBNL) and SPEAR3 (SSRL) but easily ports to other machines. Five accelerators presently use this software. The high-level Middle Layer functionality includes energy ramp, configuration control (save/restore), global orbit correction, local photon beam steering, insertion device compensation, beam-based alignment, tune correction, response matrix measurement, and script-based programs for machine physics studies

  13. Accelerating MATLAB with GPU computing a primer with examples

    CERN Document Server

    Suh, Jung W

    2013-01-01

    Beyond simulation and algorithm development, many developers increasingly use MATLAB even for product deployment in computationally heavy fields. This often demands that MATLAB codes run faster by leveraging the distributed parallelism of Graphics Processing Units (GPUs). While MATLAB successfully provides high-level functions as a simulation tool for rapid prototyping, the underlying details and knowledge needed for utilizing GPUs make MATLAB users hesitate to step into it. Accelerating MATLAB with GPUs offers a primer on bridging this gap. Starting with the basics, setting up MATLAB for

  14. Experiences with Matlab and VRML in Functional Neuroimaging Visualizations

    DEFF Research Database (Denmark)

    Nielsen, Finn Årup; Hansen, Lars Kai

    2000-01-01

    We describe some experiences with Matlab and VRML. We are developing a toolbox for neuroinformatics and describe some of the functionalities we have implemented or will implement and how Matlab and VRML support the implementation....

  15. Application of MATLAB in testing digital power supply controllers

    International Nuclear Information System (INIS)

    Ke Xinhua; Chinese Academy of Sciences, Beijing; Lu Songlin; Shen Tianjian

    2008-01-01

    Based on introducing MATLAB SISOTOOL in MATLAB control box and the magnet power supply system in detail, this paper presented the application of MATLAB SISOTOOL in Testing Digital Power Supply controllers. This control tool should be popularized because of its characteristics of convenience and easy-to-use. (authors)

  16. Introduction to fuzzy logic using Matlab

    CERN Document Server

    Sivanandam, SN; Deepa, S N

    2006-01-01

    Fuzzy Logic, at present is a hot topic, among academicians as well various programmers. This book is provided to give a broad, in-depth overview of the field of Fuzzy Logic. The basic principles of Fuzzy Logic are discussed in detail with various solved examples. The different approaches and solutions to the problems given in the book are well balanced and pertinent to the Fuzzy Logic research projects. The applications of Fuzzy Logic are also dealt to make the readers understand the concept of Fuzzy Logic. The solutions to the problems are programmed using MATLAB 6.0 and the simulated results are given. The MATLAB Fuzzy Logic toolbox is provided for easy reference.

  17. MATLAB tensor classes for fast algorithm prototyping.

    Energy Technology Data Exchange (ETDEWEB)

    Bader, Brett William; Kolda, Tamara Gibson (Sandia National Laboratories, Livermore, CA)

    2004-10-01

    Tensors (also known as mutidimensional arrays or N-way arrays) are used in a variety of applications ranging from chemometrics to psychometrics. We describe four MATLAB classes for tensor manipulations that can be used for fast algorithm prototyping. The tensor class extends the functionality of MATLAB's multidimensional arrays by supporting additional operations such as tensor multiplication. The tensor as matrix class supports the 'matricization' of a tensor, i.e., the conversion of a tensor to a matrix (and vice versa), a commonly used operation in many algorithms. Two additional classes represent tensors stored in decomposed formats: cp tensor and tucker tensor. We descibe all of these classes and then demonstrate their use by showing how to implement several tensor algorithms that have appeared in the literature.

  18. Intelligent traffic lights based on MATLAB

    Science.gov (United States)

    Nie, Ying

    2018-04-01

    In this paper, I describes the traffic lights system and it has some. Through analysis, I used MATLAB technology, transformed the camera photographs into digital signals. Than divided the road vehicle is into three methods: very congestion, congestion, a little congestion. Through the MCU programming, solved the different roads have different delay time, and Used this method, saving time and resources, so as to reduce road congestion.

  19. Nuclear Fuel Depletion Analysis Using Matlab Software

    Science.gov (United States)

    Faghihi, F.; Nematollahi, M. R.

    Coupled first order IVPs are frequently used in many parts of engineering and sciences. In this article, we presented a code including three computer programs which are joint with the Matlab software to solve and plot the solutions of the first order coupled stiff or non-stiff IVPs. Some engineering and scientific problems related to IVPs are given and fuel depletion (production of the 239Pu isotope) in a Pressurized Water Nuclear Reactor (PWR) are computed by the present code.

  20. Directional quantile regression in Octave (and MATLAB)

    Czech Academy of Sciences Publication Activity Database

    Boček, Pavel; Šiman, Miroslav

    2016-01-01

    Roč. 52, č. 1 (2016), s. 28-51 ISSN 0023-5954 R&D Projects: GA ČR GA14-07234S Institutional support: RVO:67985556 Keywords : quantile regression * multivariate quantile * depth contour * Matlab Subject RIV: IN - Informatics, Computer Science Impact factor: 0.379, year: 2016 http://library.utia.cas.cz/separaty/2016/SI/bocek-0458380.pdf

  1. Implementation of Digital Watermarking Using MATLAB Software

    OpenAIRE

    Karnpriya Vyas; Kirti Sethiya; Sonu Jain

    2012-01-01

    Digital watermarking holds significant promise as one of the keys to protecting proprietary digital content in the coming years. It focuses on embedding information inside a digital object such that the embedded information is in separable bound to the object. The proposed scheme has been implemented on MATLAB, as it is a high level technical computing language and interactive environment for algorithm development, data visualization, data analysis, and numerical computation. We w...

  2. Matlab as a robust control design tool

    Science.gov (United States)

    Gregory, Irene M.

    1994-01-01

    This presentation introduces Matlab as a tool used in flight control research. The example used to illustrate some of the capabilities of this software is a robust controller designed for a single stage to orbit air breathing vehicles's ascent to orbit. The global requirements of the controller are to stabilize the vehicle and follow a trajectory in the presence of atmospheric disturbances and strong dynamic coupling between airframe and propulsion.

  3. Generation of synthetic gamma spectra with MATLAB

    International Nuclear Information System (INIS)

    Palmerio, Julian J.; Coppo, Anibal D.

    2009-01-01

    Objectives: The aim of this work is the simulation of gamma spectra using the MATLAB program to generate the calibration curves in efficiency, which will be used to measure radioactive waste in drums. They are necessary for the proper characterization of these drums. A Monte Carlo simulation was basically developed with the random number generator Mersenne Twister and nuclear data obtained from NIST. This paper shows the results obtained and difficulties encountered until today. The physical correction of the simulated spectra has been the only aspect we have been working, up to this moment. Procedures: A simplified representation of the 'Laboratorio de Verificacion y Control de la Calidad' was chosen. Drums with cemented liquid waste are routinely measured in this laboratory. The commercial program MCNP was also used to get a valid reference in the field of simulation of spectra. We analyzed the spectra obtained by MATLAB in the light of classical literature photon detection and the spectrum obtained by MCNP. Conclusions: Currently the program developed seems adequate to simulate a measurement in the 'Laboratorio de Verificacion y Control de la Calidad'. The spectra obtained by MATLAB seem to physically represent what is observed in real spectra. However, it is a slow program. The current development efforts are directed to improve the speed of simulation. An alternative is to use the CUDA language for NVIDIA video cards to parallelized the simulation. An adequate simulation of the electronic measuring chain is also needed to obtain better representations of the shapes of the peaks. (author)

  4. Transportation channels calculation method in MATLAB

    International Nuclear Information System (INIS)

    Averyanov, G.P.; Budkin, V.A.; Dmitrieva, V.V.; Osadchuk, I.O.; Bashmakov, Yu.A.

    2014-01-01

    Output devices and charged particles transport channels are necessary components of any modern particle accelerator. They differ both in sizes and in terms of focusing elements depending on particle accelerator type and its destination. A package of transport line designing codes for magnet optical channels in MATLAB environment is presented in this report. Charged particles dynamics in a focusing channel can be studied easily by means of the matrix technique. MATLAB usage is convenient because its information objects are matrixes. MATLAB allows the use the modular principle to build the software package. Program blocks are small in size and easy to use. They can be executed separately or commonly. A set of codes has a user-friendly interface. Transport channel construction consists of focusing lenses (doublets and triplets). The main of the magneto-optical channel parameters are total length and lens position and parameters of the output beam in the phase space (channel acceptance, beam emittance - beam transverse dimensions, particles divergence and image stigmaticity). Choice of the channel operation parameters is based on the conditions for satisfying mutually competing demands. And therefore the channel parameters calculation is carried out by using the search engine optimization techniques.

  5. HUD GIS Boundary Files

    Data.gov (United States)

    Department of Housing and Urban Development — The HUD GIS Boundary Files are intended to supplement boundary files available from the U.S. Census Bureau. The files are for community planners interested in...

  6. Archeology and GIS

    Directory of Open Access Journals (Sweden)

    Janez Dular

    1992-12-01

    Full Text Available Concepts of spatial and landscape archaeologu have been accepted within Stepene archaeology for a decade. These concepts are based on the assumption  that man, by his diverse activities, made a tremendous impact on the landscape as a whole. Therefore in the research of archaeological settlement patterns, the whole landscape should be observed and analgzed. Diverse techniques of archaeological survey for data collection were developed and theoretical concepts for interpretation of those data were adapted from geographg, but onlg by applying GIS technology were this concepts made accessible to ali archaeologists. Basic concepts for GIS applications were defined in the research project "The Genesis of the cultural landscape" at the Department of Archaeology of the University of Ljubljana. However, the Hvar Project, as the first archaeological čase study, played the crucial role in acceptance of GIS technology. The analyses were concentrated on the possibilities of GIS applications in archaeo logical analysis. The best results were achieved in definition of archaeological site territories, subsistence strategies, communications and trade analyses. Few regional čase studies were started this gear because it is to be expected that soon the majoritg of the GIS archaeological applications will be in protection and management of cultural heritage. Simultaneously the Institute for Archaeology at the Slovene Academy of Sciences and Art has started with the computerization of the site and monuments database which will be integrated into the state GIS.

  7. Advanced Dynamics Analytical and Numerical Calculations with MATLAB

    CERN Document Server

    Marghitu, Dan B

    2012-01-01

    Advanced Dynamics: Analytical and Numerical Calculations with MATLAB provides a thorough, rigorous presentation of kinematics and dynamics while using MATLAB as an integrated tool to solve problems. Topics presented are explained thoroughly and directly, allowing fundamental principles to emerge through applications from areas such as multibody systems, robotics, spacecraft and design of complex mechanical devices. This book differs from others in that it uses symbolic MATLAB for both theory and applications. Special attention is given to solutions that are solved analytically and numerically using MATLAB. The illustrations and figures generated with MATLAB reinforce visual learning while an abundance of examples offer additional support. This book also: Provides solutions analytically and numerically using MATLAB Illustrations and graphs generated with MATLAB reinforce visual learning for students as they study Covers modern technical advancements in areas like multibody systems, robotics, spacecraft and des...

  8. Operational SAR Data Processing in GIS Environments for Rapid Disaster Mapping

    Science.gov (United States)

    Bahr, Thomas

    2014-05-01

    The use of SAR data has become increasingly popular in recent years and in a wide array of industries. Having access to SAR can be highly important and critical especially for public safety. Updating a GIS with contemporary information from SAR data allows to deliver a reliable set of geospatial information to advance civilian operations, e.g. search and rescue missions. SAR imaging offers the great advantage, over its optical counterparts, of not being affected by darkness, meteorological conditions such as clouds, fog, etc., or smoke and dust, frequently associated with disaster zones. In this paper we present the operational processing of SAR data within a GIS environment for rapid disaster mapping. For this technique we integrated the SARscape modules for ENVI with ArcGIS®, eliminating the need to switch between software packages. Thereby the premier algorithms for SAR image analysis can be directly accessed from ArcGIS desktop and server environments. They allow processing and analyzing SAR data in almost real time and with minimum user interaction. This is exemplified by the November 2010 flash flood in the Veneto region, Italy. The Bacchiglione River burst its banks on Nov. 2nd after two days of heavy rainfall throughout the northern Italian region. The community of Bovolenta, 22 km SSE of Padova, was covered by several meters of water. People were requested to stay in their homes; several roads, highways sections and railroads had to be closed. The extent of this flooding is documented by a series of Cosmo-SkyMed acquisitions with a GSD of 2.5 m (StripMap mode). Cosmo-SkyMed is a constellation of four Earth observation satellites, allowing a very frequent coverage, which enables monitoring using a very high temporal resolution. This data is processed in ArcGIS using a single-sensor, multi-mode, multi-temporal approach consisting of 3 steps: (1) The single images are filtered with a Gamma DE-MAP filter. (2) The filtered images are geocoded using a reference

  9. Signals and systems primer with Matlab

    CERN Document Server

    Poularikas, Alexander D

    2006-01-01

    Signals and Systems Primer with MATLAB® equally emphasizes the fundamentals of both analog and digital signals and systems. To ensure insight into the basic concepts and methods, the text presents a variety of examples that illustrate a wide range of applications, from microelectromechanical to worldwide communication systems. It also provides MATLAB functions and procedures for practice and verification of these concepts.Taking a pedagogical approach, the author builds a solid foundation in signal processing as well as analog and digital systems. The book first introduces orthogonal signals,

  10. The Matlab Radial Basis Function Toolbox

    Directory of Open Access Journals (Sweden)

    Scott A. Sarra

    2017-03-01

    Full Text Available Radial Basis Function (RBF methods are important tools for scattered data interpolation and for the solution of Partial Differential Equations in complexly shaped domains. The most straight forward approach used to evaluate the methods involves solving a linear system which is typically poorly conditioned. The Matlab Radial Basis Function toolbox features a regularization method for the ill-conditioned system, extended precision floating point arithmetic, and symmetry exploitation for the purpose of reducing flop counts of the associated numerical linear algebra algorithms.

  11. Computational partial differential equations using Matlab

    CERN Document Server

    Li, Jichun

    2008-01-01

    Brief Overview of Partial Differential Equations The parabolic equations The wave equations The elliptic equations Differential equations in broader areasA quick review of numerical methods for PDEsFinite Difference Methods for Parabolic Equations Introduction Theoretical issues: stability, consistence, and convergence 1-D parabolic equations2-D and 3-D parabolic equationsNumerical examples with MATLAB codesFinite Difference Methods for Hyperbolic Equations IntroductionSome basic difference schemes Dissipation and dispersion errors Extensions to conservation lawsThe second-order hyperbolic PDE

  12. Multimodale trafiknet i GIS (Multimodal Traffic Network in GIS)

    DEFF Research Database (Denmark)

    Kronbak, Jacob; Brems, Camilla Riff

    1996-01-01

    The report introduces the use of multi-modal traffic networks within a geographical Information System (GIS). The necessary theory of modelling multi-modal traffic network is reviewed and applied to the ARC/INFO GIS by an explorative example.......The report introduces the use of multi-modal traffic networks within a geographical Information System (GIS). The necessary theory of modelling multi-modal traffic network is reviewed and applied to the ARC/INFO GIS by an explorative example....

  13. Anvendeligheden af GIS

    DEFF Research Database (Denmark)

    Winstrup, Mie; Levin, Gregor

    2011-01-01

    Fragmentering af naturen er en trussel mod biodiversiteten, og etablering af økologiske forbindelser/korridorer mellem naturområderne er én måde hvorved nedgangen i biodiversitet kan stoppes. Med Næstved Kommune som case-område har jeg undersøgt, hvordan analyser i GIS kan bruges til at udvælge...... omdannet til reelle korridorer, hvor bredden afhænger af arealdækket som forbindelserne krydser. I implementerings øjemed er det anvendeligt at vide om nogle forbindelser er særlig vigtige for at skabe mere sammenhængende natur. GIS er anvendeligt hertil, idet GIS kan bruges til at bestemme den enkelte...

  14. Evaluation of the ENVI-Met Vegetation Model of Four Common Tree Species in a Subtropical Hot-Humid Area

    Directory of Open Access Journals (Sweden)

    Zhixin Liu

    2018-05-01

    Full Text Available Urban trees can significantly improve the outdoor thermal environment, especially in subtropical zones. However, due to the lack of fundamental evaluations of numerical simulation models, design and modification strategies for optimizing the thermal environment in subtropical hot-humid climate zones cannot be proposed accurately. To resolve this issue, this study investigated the physiological parameters (leaf surface temperature and vapor flux and thermal effects (solar radiation, air temperature, and humidity of four common tree species (Michelia alba, Mangifera indica, Ficus microcarpa, and Bauhinia blakeana in both spring and summer in Guangzhou, China. A comprehensive comparison of the observed and modeled data from ENVI-met (v4.2 Science, a three-dimensional microclimate model was performed. The results show that the most fundamental weakness of ENVI-met is the limitation of input solar radiation, which cannot be input hourly in the current version and may impact the thermal environment in simulation. For the tree model, the discrepancy between modeled and observed microclimate parameters was acceptable. However, for the physiological parameters, ENVI-met tended to overestimate the leaf surface temperature and underestimate the vapor flux, especially at midday in summer. The simplified calculation of the tree model may be one of the main reasons. Furthermore, the thermal effect of trees, meaning the differences between nearby treeless sites and shaded areas, were all underestimated in ENVI-met for each microclimate variable. This study shows that the tree model is suitable in subtropical hot-humid climates, but also needs some improvement.

  15. Digital signal processing with Matlab examples

    CERN Document Server

    Giron-Sierra, Jose Maria

    2017-01-01

    This is the first volume in a trilogy on modern Signal Processing. The three books provide a concise exposition of signal processing topics, and a guide to support individual practical exploration based on MATLAB programs. This book includes MATLAB codes to illustrate each of the main steps of the theory, offering a self-contained guide suitable for independent study. The code is embedded in the text, helping readers to put into practice the ideas and methods discussed. The book is divided into three parts, the first of which introduces readers to periodic and non-periodic signals. The second part is devoted to filtering, which is an important and commonly used application. The third part addresses more advanced topics, including the analysis of real-world non-stationary signals and data, e.g. structural fatigue, earthquakes, electro-encephalograms, birdsong, etc. The book’s last chapter focuses on modulation, an example of the intentional use of non-stationary signals.

  16. GIS og geodata

    DEFF Research Database (Denmark)

    Balstrøm, Thomas

    2008-01-01

    Interview med Thomas Balstrøm om anvendelser af geografiske informationssystemer (GIS) i relation til forskning i jordbundsgeografiske problemstillinger. Bl.a. om forskning i rumlige analyser og inddragelse af rumlig statistik til at finde sammenhænge i geografiske data.......Interview med Thomas Balstrøm om anvendelser af geografiske informationssystemer (GIS) i relation til forskning i jordbundsgeografiske problemstillinger. Bl.a. om forskning i rumlige analyser og inddragelse af rumlig statistik til at finde sammenhænge i geografiske data....

  17. Gis and public health

    CERN Document Server

    Cromley, Ellen K

    2011-01-01

    Authoritative and comprehensive, this is the leading text and professional resource on using geographic information systems (GIS) to analyze and address public health problems. Basic GIS concepts and tools are explained, including ways to access and manage spatial databases. The book presents state-of-the-art methods for mapping and analyzing data on population, health events, risk factors, and health services, and for incorporating geographical knowledge into planning and policy. Numerous maps, diagrams, and real-world applications are featured. The companion Web page provides lab exercises w

  18. Differential substrate subsidence of the EnviHUT project pitched extensive green roof

    Directory of Open Access Journals (Sweden)

    Nečadová Klára

    2017-01-01

    Full Text Available In primary phase of testing building physical characteristics of the EnviHUT project extensive and semi-intensive roofs with 30° inclination occurred exceptional substrate subsidence. An extensive testing field with retaining geocell-system evinced differential subsidence of individual sectors after six months. Measured subsidence of installed substrate reached 40 % subsidence compared to originally designed height (intended layer thickness. Subsequent deformation of geocell-system additionally caused partial slide of substrate to drip edge area. These slides also influenced initial development of stonecrop plants on its surface. Except functional shortages the aesthetical function of the whole construction is influenced by the mentioned problem. The stated paper solves mentioned issues in view of installation method optimization, selection and modification of used roof substrate and in view of modification of geometric and building installed elements retaining system arrangement. Careful adjustment of roof system geometry and enrichment of original substrate fraction allow full functionality from pitched extensive green roof setting up. The modification scheme and its substantiation is a part of this technical study output.

  19. Evaluating the performance of ENVI-met model in diurnal cycles for different meteorological conditions

    Science.gov (United States)

    Acero, Juan A.; Arrizabalaga, Jon

    2018-01-01

    Urban areas are known to modify meteorological variables producing important differences in small spatial scales (i.e. microscale). These affect human thermal comfort conditions and the dispersion of pollutants, especially those emitted inside the urban area, which finally influence quality of life and the use of public open spaces. In this study, the diurnal evolution of meteorological variables measured in four urban spaces is compared with the results provided by ENVI-met (v 4.0). Measurements were carried out during 3 days with different meteorological conditions in Bilbao in the north of the Iberian Peninsula. The evaluation of the model accuracy (i.e. the degree to which modelled values approach measured values) was carried out with several quantitative difference metrics. The results for air temperature and humidity show a good agreement of measured and modelled values independently of the regional meteorological conditions. However, in the case of mean radiant temperature and wind speed, relevant differences are encountered highlighting the limitation of the model to estimate these meteorological variables precisely during diurnal cycles, in the considered evaluation conditions (sites and weather).

  20. Climate-sensitive urban design through Envi-Met simulation: case study in Kemayoran, Jakarta

    Science.gov (United States)

    Kusumastuty, K. D.; Poerbo, H. W.; Koerniawan, M. D.

    2018-03-01

    Indonesia as a tropical country which the character of its climate are hot and humid, the outdoor activity applications are often disrupted due to discomfort in thermal conditions. Massive construction of skyscrapers in urban areas are caused by the increase of human population leads to reduced green and infiltration areas that impact to environmental imbalances and triggering microclimate changes with rising air temperatures on the surface. The area that significantly experiences the rise of temperature in the Central Business District (CBD), which has need an analysis to create thermal comfort conditions to improve the ease of outdoor activities by an approach. This study aims to design the Kemayoran CBD through Climate Sensitive Urban Design especially in hot and humid tropical climate area and analyze thermal comfort level and optimal air conditioning in the outdoor area. This research used a quantitative method by generating the design using Climate Sensitive Urban Design principle through Envi-met 4.1 simulation program to find out the value of PMV, air temperature, wind speed and relative humidity conditions. The design area considers the configuration of buildings such as the distance between buildings, the average height, the orientation of the building, and the width of the road.

  1. A guide to MATLAB for beginners and experienced users

    CERN Document Server

    Hunt, Brian R; Rosenberg, Jonathan M

    2014-01-01

    Now in its third edition, this outstanding textbook explains everything you need to get started using MATLAB®. It contains concise explanations of essential MATLAB commands, as well as easily understood instructions for using MATLAB's programming features, graphical capabilities, simulation models, and rich desktop interface. MATLAB 8 and its new user interface is treated extensively in the book. New features in this edition include: a complete treatment of MATLAB's publish feature; new material on MATLAB graphics, enabling the user to master quickly the various symbolic and numerical plotting routines; and a robust presentation of MuPAD® and how to use it as a stand-alone platform. The authors have also updated the text throughout, reworking examples and exploring new applications. The book is essential reading for beginners, occasional users and experienced users wishing to brush up their skills. Further resources are available from the authors' website at www-math.umd.edu/schol/a-guide-to-matlab.html.

  2. Digital image processing an algorithmic approach with Matlab

    CERN Document Server

    Qidwai, Uvais

    2009-01-01

    Introduction to Image Processing and the MATLAB EnvironmentIntroduction Digital Image Definitions: Theoretical Account Image Properties MATLAB Algorithmic Account MATLAB CodeImage Acquisition, Types, and File I/OImage Acquisition Image Types and File I/O Basics of Color Images Other Color Spaces Algorithmic Account MATLAB CodeImage ArithmeticIntroduction Operator Basics Theoretical TreatmentAlgorithmic Treatment Coding ExamplesAffine and Logical Operations, Distortions, and Noise in ImagesIntroduction Affine Operations Logical Operators Noise in Images Distortions in ImagesAlgorithmic Account

  3. GIS Readiness Survey 2014

    DEFF Research Database (Denmark)

    Schrøder, Lise; Hvingel, Line Træholt; Hansen, Henning Sten

    2014-01-01

    The GIS Readiness Survey 2014 is a follow-up to the corresponding survey that was carried out among public institutions in Denmark in 2009. The present survey thus provides an updated image of status and challenges in relation to the use of spatial information, the construction of the com- mon...

  4. GIS WORK GROUP: AN OVERVIEW (INCLUDES GIS-QA AND AUDITING GIS DATABASE SYSTEMS)

    Science.gov (United States)

    In order to promote cooperation in the implementation of GIS in regional offices, a GIS Regional Workgroup was established by the ten Regions in 1989. Since that time the GIS Work Group evolved and now consists of members from each of the ten EPA Regional Offices, the Office of A...

  5. Colour based sorting station with Matlab simulation

    Directory of Open Access Journals (Sweden)

    Constantin Victor

    2017-01-01

    Full Text Available The paper presents the design process and manufacturing elements of a colour-based sorting station. The system is comprised of a gravitational storage, which also contains the colour sensor. Parts are extracted using a linear pneumatic motor and are fed onto an electrically driven conveyor belt. Extraction of the parts is done at 4 points, using two pneumatic motors and a geared DC motor, while the 4th position is at the end of the belt. The mechanical parts of the system are manufactured using 3D printer technology, allowing for easy modification and adaption to the geometry of different parts. The paper shows all of the stages needed to design, optimize, test and implement the proposed solution. System optimization was performed using a graphical Matlab interface which also allows for sorting algorithm optimization.

  6. Scientific computing with MATLAB and Octave

    CERN Document Server

    Quarteroni, Alfio; Gervasio, Paola

    2014-01-01

    This textbook is an introduction to Scientific Computing, in which several numerical methods for the computer-based solution of certain classes of mathematical problems are illustrated. The authors show how to compute the zeros, the extrema, and the integrals of continuous functions, solve linear systems, approximate functions using polynomials and construct accurate approximations for the solution of ordinary and partial differential equations. To make the format concrete and appealing, the programming environments Matlab and Octave are adopted as faithful companions. The book contains the solutions to several problems posed in exercises and examples, often originating from important applications. At the end of each chapter, a specific section is devoted to subjects which were not addressed in the book and contains bibliographical references for a more comprehensive treatment of the material. From the review: ".... This carefully written textbook, the third English edition, contains substantial new developme...

  7. Coded Modulation in C and MATLAB

    Science.gov (United States)

    Hamkins, Jon; Andrews, Kenneth S.

    2011-01-01

    This software, written separately in C and MATLAB as stand-alone packages with equivalent functionality, implements encoders and decoders for a set of nine error-correcting codes and modulators and demodulators for five modulation types. The software can be used as a single program to simulate the performance of such coded modulation. The error-correcting codes implemented are the nine accumulate repeat-4 jagged accumulate (AR4JA) low-density parity-check (LDPC) codes, which have been approved for international standardization by the Consultative Committee for Space Data Systems, and which are scheduled to fly on a series of NASA missions in the Constellation Program. The software implements the encoder and decoder functions, and contains compressed versions of generator and parity-check matrices used in these operations.

  8. Object-oriented Matlab adaptive optics toolbox

    Science.gov (United States)

    Conan, R.; Correia, C.

    2014-08-01

    Object-Oriented Matlab Adaptive Optics (OOMAO) is a Matlab toolbox dedicated to Adaptive Optics (AO) systems. OOMAO is based on a small set of classes representing the source, atmosphere, telescope, wavefront sensor, Deformable Mirror (DM) and an imager of an AO system. This simple set of classes allows simulating Natural Guide Star (NGS) and Laser Guide Star (LGS) Single Conjugate AO (SCAO) and tomography AO systems on telescopes up to the size of the Extremely Large Telescopes (ELT). The discrete phase screens that make the atmosphere model can be of infinite size, useful for modeling system performance on large time scales. OOMAO comes with its own parametric influence function model to emulate different types of DMs. The cone effect, altitude thickness and intensity profile of LGSs are also reproduced. Both modal and zonal modeling approach are implemented. OOMAO has also an extensive library of theoretical expressions to evaluate the statistical properties of turbulence wavefronts. The main design characteristics of the OOMAO toolbox are object-oriented modularity, vectorized code and transparent parallel computing. OOMAO has been used to simulate and to design the Multi-Object AO prototype Raven at the Subaru telescope and the Laser Tomography AO system of the Giant Magellan Telescope. In this paper, a Laser Tomography AO system on an ELT is simulated with OOMAO. In the first part, we set-up the class parameters and we link the instantiated objects to create the source optical path. Then we build the tomographic reconstructor and write the script for the pseudo-open-loop controller.

  9. Introduction to Numerical Computation - analysis and Matlab illustrations

    DEFF Research Database (Denmark)

    Elden, Lars; Wittmeyer-Koch, Linde; Nielsen, Hans Bruun

    In a modern programming environment like eg MATLAB it is possible by simple commands to perform advanced calculations on a personal computer. In order to use such a powerful tool efiiciently it is necessary to have an overview of available numerical methods and algorithms and to know about...... are illustrated by examples in MATLAB....

  10. Flexible missile autopilot design studies with PC-MATLAB/386

    Science.gov (United States)

    Ruth, Michael J.

    1989-01-01

    Development of a responsive, high-bandwidth missile autopilot for airframes which have structural modes of unusually low frequency presents a challenging design task. Such systems are viable candidates for modern, state-space control design methods. The PC-MATLAB interactive software package provides an environment well-suited to the development of candidate linear control laws for flexible missile autopilots. The strengths of MATLAB include: (1) exceptionally high speed (MATLAB's version for 80386-based PC's offers benchmarks approaching minicomputer and mainframe performance); (2) ability to handle large design models of several hundred degrees of freedom, if necessary; and (3) broad extensibility through user-defined functions. To characterize MATLAB capabilities, a simplified design example is presented. This involves interactive definition of an observer-based state-space compensator for a flexible missile autopilot design task. MATLAB capabilities and limitations, in the context of this design task, are then summarized.

  11. Viva il GIS Day!

    Directory of Open Access Journals (Sweden)

    Redazione Redazione

    2007-03-01

    Full Text Available Il GIS Day è sponsorizzato oltre che da ESRI, dalla National Geographic Society, dalla Association of American Geographers, dalla UCGIS (University Consortium for Geographic Information Science, dalla United States Geological Survey e dalla Library of Congress. Il tutto nasce nel corso della Geography Awareness Week, terza settimana di novembre che nel 1987 il Presidente degli Stati Uniti Ronald Reagan stabilì dovesse essere dedicata alla diffusione della cultura geografica.

  12. Assessment of Envi-Carb™ as a passive sampler binding phase for acid herbicides without pH adjustment.

    Science.gov (United States)

    Seen, Andrew; Bizeau, Oceane; Sadler, Lachlan; Jordan, Timothy; Nichols, David

    2014-05-01

    The graphitised carbon solid phase extraction (SPE) sorbent Envi-Carb has been used to fabricate glass fibre filter- Envi-Carb "sandwich" disks for use as a passive sampler for acid herbicides. Passive sampler uptake of a suite of herbicides, including the phenoxyacetic acid herbicides 4-chloro-o-tolyloxyacetic acid (MCPA), 2,4-dichlorophenoxyacetic acid (2,4-D) and 3,6-dichloro-2-methoxybenzoic acid (Dicamba), was achieved without pH adjustment, demonstrating for the first time a suitable binding phase for passive sampling of acid herbicides at neutral pH. Passive sampling experiments with Duck River (Tasmania, Australia) water spiked at 0.5 μg L(-1) herbicide concentration over a 7 d deployment period showed that sampling rates in Duck River water decreased for seven out of eight herbicides, and in the cases of 3,6-dichloro-2-pyridinecarboxylic acid (Clopyralid) and Dicamba no accumulation of the herbicides occurred in the Envi-Carb over the deployment period. Sampling rates for 4-amino-3,5,6-trichloro-2-pyridinecarboxylic acid (Picloram), 2,4-D and MCPA decreased to approximately 30% of the sampling rates in ultrapure water, whilst sampling rates for 2-(4,6-dimethylpyrimidin-2-ylcarbamoylsulfamoyl) benzoic acid, methyl ester (Sulfometuron-methyl) and 3,5,6-Trichloro-2-pyridinyloxyacetic acid (Triclopyr) were approximately 60% of the ultrapure water sampling rate. For methyl N-(2,6-dimethylphenyl)-N-(methoxyacetyl)-D-alaninate (Metalaxyl-M) there was little variation in sampling rate between passive sampling experiments in ultrapure water and Duck River water. SPE experiments undertaken with Envi-Carb disks using ultrapure water and filtered and unfiltered Duck River water showed that not only is adsorption onto particulate matter in Duck River water responsible for a reduction in herbicide sampling rate, but interactions of herbicides with dissolved or colloidal matter (matter able to pass through a 0.2 μm membrane filter) also reduces the herbicide sampling

  13. Cloud GIS Based Watershed Management

    Science.gov (United States)

    Bediroğlu, G.; Colak, H. E.

    2017-11-01

    In this study, we generated a Cloud GIS based watershed management system with using Cloud Computing architecture. Cloud GIS is used as SAAS (Software as a Service) and DAAS (Data as a Service). We applied GIS analysis on cloud in terms of testing SAAS and deployed GIS datasets on cloud in terms of DAAS. We used Hybrid cloud computing model in manner of using ready web based mapping services hosted on cloud (World Topology, Satellite Imageries). We uploaded to system after creating geodatabases including Hydrology (Rivers, Lakes), Soil Maps, Climate Maps, Rain Maps, Geology and Land Use. Watershed of study area has been determined on cloud using ready-hosted topology maps. After uploading all the datasets to systems, we have applied various GIS analysis and queries. Results shown that Cloud GIS technology brings velocity and efficiency for watershed management studies. Besides this, system can be easily implemented for similar land analysis and management studies.

  14. Introduction to finite element analysis using MATLAB and Abaqus

    CERN Document Server

    Khennane, Amar

    2013-01-01

    There are some books that target the theory of the finite element, while others focus on the programming side of things. Introduction to Finite Element Analysis Using MATLAB(R) and Abaqus accomplishes both. This book teaches the first principles of the finite element method. It presents the theory of the finite element method while maintaining a balance between its mathematical formulation, programming implementation, and application using commercial software. The computer implementation is carried out using MATLAB, while the practical applications are carried out in both MATLAB and Abaqus. MA

  15. Kinematic analysis of the finger exoskeleton using MATLAB/Simulink.

    Science.gov (United States)

    Nasiłowski, Krzysztof; Awrejcewicz, Jan; Lewandowski, Donat

    2014-01-01

    A paralyzed and not fully functional part of human body can be supported by the properly designed exoskeleton system with motoric abilities. It can help in rehabilitation, or movement of a disabled/paralyzed limb. Both suitably selected geometry and specialized software are studied applying the MATLAB environment. A finger exoskeleton was the base for MATLAB/Simulink model. Specialized software, such as MATLAB/Simulink give us an opportunity to optimize calculation reaching precise results, which help in next steps of design process. The calculations carried out yield information regarding movement relation between three functionally connected actuators and showed distance and velocity changes during the whole simulation time.

  16. Matlab Tools: An Alternative to Planning Systems in Brachytherapy Treatments

    International Nuclear Information System (INIS)

    Herrera, Higmar; Rodriguez, Mercedes; Rodriguez, Miguel

    2006-01-01

    This work proposes the use of the Matlab environment to obtain the treatment dose based on the reported data by Krishnaswamy and Liu et al. The comparison with reported measurements is showed for the Amersham source model. For the 3M source model, measurements with TLDs and a Monte Carlo simulation are compared to the data obtained by Matlab. The difference for the Amersham model is well under the 15% recommended by the IAEA and for the 3M model, although the difference is greater, the results are consistent. The good agreement to the reported data allows the Matlab calculations to be used in daily brachytherapy treatments

  17. A Graphical User Interface to Generalized Linear Models in MATLAB

    Directory of Open Access Journals (Sweden)

    Peter Dunn

    1999-07-01

    Full Text Available Generalized linear models unite a wide variety of statistical models in a common theoretical framework. This paper discusses GLMLAB-software that enables such models to be fitted in the popular mathematical package MATLAB. It provides a graphical user interface to the powerful MATLAB computational engine to produce a program that is easy to use but with many features, including offsets, prior weights and user-defined distributions and link functions. MATLAB's graphical capacities are also utilized in providing a number of simple residual diagnostic plots.

  18. Paleomagnetic dating: Methods, MATLAB software, example

    Science.gov (United States)

    Hnatyshin, Danny; Kravchinsky, Vadim A.

    2014-09-01

    A MATLAB software tool has been developed to provide an easy to use graphical interface for the plotting and interpretation of paleomagnetic data. The tool takes either paleomagnetic directions or paleopoles and compares them to a user defined apparent polar wander path or secular variation curve to determine the age of a paleomagnetic sample. Ages can be determined in two ways, either by translating the data onto the reference curve, or by rotating it about a set location (e.g. sampling location). The results are then compiled in data tables which can be exported as an excel file. This data can also be plotted using variety of built-in stereographic projections, which can then be exported as an image file. This software was used to date the giant Sukhoi Log gold deposit in Russia. Sukhoi Log has undergone a complicated history of faulting, folding, metamorphism, and is the vicinity of many granitic bodies. Paleomagnetic analysis of Sukhoi Log allowed for the timing of large scale thermal or chemical events to be determined. Paleomagnetic analysis from gold mineralized black shales was used to define the natural remanent magnetization recorded at Sukhoi Log. The obtained paleomagnetic direction from thermal demagnetization produced a paleopole at 61.3°N, 155.9°E, with the semi-major axis and semi-minor axis of the 95% confidence ellipse being 16.6° and 15.9° respectively. This paleopole is compared to the Siberian apparent polar wander path (APWP) by translating the paleopole to the nearest location on the APWP. This produced an age of 255.2- 31.0+ 32.0Ma and is the youngest well defined age known for Sukhoi Log. We propose that this is the last major stage of activity at Sukhoi Log, and likely had a role in determining the present day state of mineralization seen at the deposit.

  19. Matlab GUI for a Fluid Mixer

    Science.gov (United States)

    Barbieri, Enrique

    2005-01-01

    The Test and Engineering Directorate at NASA John C. Stennis Space Center developed an interest to study the modeling, evaluation, and control of a liquid hydrogen (LH2) and gas hydrogen (GH2) mixer subsystem of a ground test facility. This facility carries out comprehensive ground-based testing and certification of liquid rocket engines including the Space Shuttle Main engine. A software simulation environment developed in MATLAB/SIMULINK (M/S) will allow NASA engineers to test rocket engine systems at relatively no cost. In the progress report submitted in February 2004, we described the development of two foundation programs, a reverse look-up application using various interpolation algorithms, a variety of search and return methods, and self-checking methods to reduce the error in returned search results to increase the functionality of the program. The results showed that these efforts were successful. To transfer this technology to engineers who are not familiar with the M/S environment, a four-module GUI was implemented allowing the user to evaluate the mixer model under open-loop and closed-loop conditions. The progress report was based on an udergraduate Honors Thesis by Ms. Jamie Granger Austin in the Department of Electrical Engineering and Computer Science at Tulane University, during January-May 2003, and her continued efforts during August-December 2003. In collaboration with Dr. Hanz Richter and Dr. Fernando Figueroa we published these results in a NASA Tech Brief due to appear this year. Although the original proposal in 2003 did not address other components of the test facility, we decided in the last few months to extend our research and consider a related pressurization tank component as well. This report summarizes the results obtained towards a Graphical User Interface (GUI) for the evaluation and control of the hydrogen mixer subsystem model and for the pressurization tank each taken individually. Further research would combine the two

  20. The Study of Thermal Comfort in Transforming Residential Area in Bandung using ENVI-met Software. Case Study: Progo Street

    Science.gov (United States)

    Aziz Soelaiman, Tubagus M.; Soedarsono, Woerjantari K.; Donny Koerniawan, M.

    2018-05-01

    Bandung has a high potential in attracting tourists. This potential impact on building function near tourist attraction that can transform residential uses into commercial uses. Progo Street and its surrounding area used as the case study, which is close to Gedung Sate and Riau Street as tourist destinations in Bandung. Moreover, this transformation is also reinforced by the spatial planning policies in Bandung, known as RTRW and RDTR, said that this area will be fully non-residential area. This condition in some cases could affect thermal comfort. This paper provides the changes of thermal comfort phenomenon that occurs using EnviMet software. The study compares Predicted Mean Voted (PMV) as thermal comfort indicator between existing and Bandung detailed spatial plan (RDTR) condition. The result shows that the PMV value of current condition is higher than future planning, nonetheless the planned area will be changed into higher non-residential buildings and less greeneries. Some environmental factors that are used to calculate PMV such as air temperature, mean radiant temperature, humidity, and wind speed are also examined to find out what makes the plan more comfortable than the existing. Simulations using ENVI-met software could be considered in making more objective planning policy in the future.

  1. Gis Day 2005

    Directory of Open Access Journals (Sweden)

    Esri Italia Esri Italia

    2005-10-01

    Full Text Available Si è svolto nelle Marche, ad Urbino, città simbolo del legame tra scienza e Rinascimento, il GIS DAY 2005; l’evento ha avuto il patrocinio di DAMAC – INTERREG SECUR SEA ed il supporto di: Regione Marche - Giunta Regionale, Contea di Zara (Croazia, Centro di Geobiologia - Università di Urbino, Forum delle Città dell’Adriatico e dello Ionio e Adriatic Action Plan 2020 ed ha sviluppato il tema dedicato ad “Un GIS interoperabile e internazionale”.

  2. System design through Matlab, control toolbox and Simulink

    CERN Document Server

    Singh, Krishna K

    2001-01-01

    MATLAB , a software package developed by Math Works, Inc. is powerful, versatile and interactive software for scientific and technical computations including simulations. Specialised toolboxes provided with several built-in functions are a special feature of MATLAB . This book titled System Design through MATLAB , Control Toolbox and SIMULINK aims at getting the reader started with computations and simulations in system engineering quickly and easily and then proceeds to build concepts for advanced computations and simulations that includes the control and compensation of systems. Simulation through SIMULINK has also been described to allow the reader to get the feel of the real world situation. This book is appropriate for undergraduate students undergoing final semester of their project work, postgraduate students who have MATLAB integrated in their course or wish to take up simulation problem in the area of system engineering for their dissertation work and research scholars for whom MATLABÊ

  3. Speeding up the MATLAB complex networks package using graphic processors

    International Nuclear Information System (INIS)

    Zhang Bai-Da; Wu Jun-Jie; Li Xin; Tang Yu-Hua

    2011-01-01

    The availability of computers and communication networks allows us to gather and analyse data on a far larger scale than previously. At present, it is believed that statistics is a suitable method to analyse networks with millions, or more, of vertices. The MATLAB language, with its mass of statistical functions, is a good choice to rapidly realize an algorithm prototype of complex networks. The performance of the MATLAB codes can be further improved by using graphic processor units (GPU). This paper presents the strategies and performance of the GPU implementation of a complex networks package, and the Jacket toolbox of MATLAB is used. Compared with some commercially available CPU implementations, GPU can achieve a speedup of, on average, 11.3×. The experimental result proves that the GPU platform combined with the MATLAB language is a good combination for complex network research. (interdisciplinary physics and related areas of science and technology)

  4. Introducing Effects in an Image: A MATLAB Approach

    OpenAIRE

    Kumar , Vinay; Sood , Saurabh; Mishra , Shruti

    2008-01-01

    A detailed study of introducing morning, night, and some more effect in an image is discussed, the original image is clicked in the morning. Several examples have also been discussed. MATLAB is used for the processing.

  5. Development and Validation of Reentry Simulation Using MATLAB

    National Research Council Canada - National Science Library

    Jameson, Jr, Robert E

    2006-01-01

    This research effort develops a program using MATLAB to solve the equations of motion for atmospheric reentry and analyzes the validity of the program for use as a tool to expeditiously predict reentry profiles...

  6. Research based on matlab method of digital trapezoidal shaping filter

    International Nuclear Information System (INIS)

    Zhou Qinghua; Zhang Ruanyu; Li Taihua

    2008-01-01

    In order to develop digital shaping system fast and conveniently, the paper presents the method of optimizing the trapezoidal shaping filter's parameters by using MATLAB, and discusses the affections of the parameters to the shaping result by this method. (authors)

  7. Design and fabrication of diffractive optical elements with MATLAB

    National Research Council Canada - National Science Library

    Bhattacharya, Shanti (Professor in Optics); Vijayakumar, Anand

    2017-01-01

    ... their diffraction patterns using MATLAB. The fundamentals of fabrication techniques such as photolithography, electron beam lithography, and focused ion beam lithography with basic instructions for the beginner are presented...

  8. Students Individual Engagement in GIS

    Science.gov (United States)

    Madsen, Lene Møller; Christiansen, Frederik; Rump, Camilla

    2014-01-01

    This paper develops two sets of concepts to theorize why students engage differently in Geographical Information Systems (GIS). These theoretical concepts are used as an analytical lens to explore empirical data on the experiences and engagement of students enrolled in an undergraduate GIS course in planning and management. The analysis shows that…

  9. Tilgængelighed & GIS

    DEFF Research Database (Denmark)

    Clemens, Esben Norby; Rolff-Petersen, Hans

    2002-01-01

    Artiklen beskriver en metode til implementering af en gravitationsbaseret tilgængelighedsmodel ved anvendelse af bl.a. netværksberegninger i et standard GIS-software. Udgivelsesdato: August......Artiklen beskriver en metode til implementering af en gravitationsbaseret tilgængelighedsmodel ved anvendelse af bl.a. netværksberegninger i et standard GIS-software. Udgivelsesdato: August...

  10. Study of a photovoltaic system with MPPT using Matlab

    Directory of Open Access Journals (Sweden)

    Dumitru Pop

    2012-12-01

    Full Text Available In this paper a photovoltaic (PV system is analyzed using Matlab. First, a Matlab code is written in order to obtain the I-V and P-V curves at different values of solar irradiation and cell temperature. The results were compared with the experimental data of a commercial PV module, USP 150. Then, the code was implemented in Simulink and, along with a MPPT algorithm and a DC-DC converter, the whole system was simulated.

  11. Training course "Porting code from Matlab to Python"

    OpenAIRE

    Diaz, Sandra; Klijn, Wouter; Deepu, Rajalekshmi; Peyser, Alexander; Oden, Lena

    2017-01-01

    Python is becoming a popular language for scientific applications and is increasingly used for high performance computing. In this course we want to introduce Matlab programmers to the usage of Python. Matlab and Python have a comparable language philosophy, but Python can offer better performance using its optimizations and parallelization interfaces. Python also increases the portability and flexibility (interaction with other open source and proprietary software packages) of solutions, and...

  12. Subband/Transform MATLAB Functions For Processing Images

    Science.gov (United States)

    Glover, D.

    1995-01-01

    SUBTRANS software is package of routines implementing image-data-processing functions for use with MATLAB*(TM) software. Provides capability to transform image data with block transforms and to produce spatial-frequency subbands of transformed data. Functions cascaded to provide further decomposition into more subbands. Also used in image-data-compression systems. For example, transforms used to prepare data for lossy compression. Written for use in MATLAB mathematical-analysis environment.

  13. GIS and Public Health

    Directory of Open Access Journals (Sweden)

    Stefania Bertazzon

    2014-06-01

    Full Text Available This Special Issue on GIS and public health is the result of a highly selective process, which saw the participation of some 20 expert peer-reviewers and led to the acceptance of one half of the high-quality submissions received over the past year. Many threads link these papers to each other and, indeed, to our original call for papers, but the element that most clearly emerges from these works is the inextricable connection between public health and the environment. Indeed, GIS analysis of public health simply cannot disregard the geospatial dimension of environmental resources and risks. What consistently emerges from these analyses is that current geospatial research can only scratch the surface of the complex interactions of spatial resources, risks, and public health. In today’s world, or at least in the developed world, researchers and practitioners can count on virtually endless data, on inexpensive computational power, and on seamless connectivity. In this research environment, these papers point to the need for improved analytical tools, covering concepts, representation, modeling and reliability. These works are important contributions that help us to identify what advances in geospatial analysis can better address the complex interactions of public health with our physical and cultural environment, and bridge research and practice, so that geospatial analyses can inform public health policy making. [...

  14. OMPC: an Open-Source MATLAB-to-Python Compiler.

    Science.gov (United States)

    Jurica, Peter; van Leeuwen, Cees

    2009-01-01

    Free access to scientific information facilitates scientific progress. Open-access scientific journals are a first step in this direction; a further step is to make auxiliary and supplementary materials that accompany scientific publications, such as methodological procedures and data-analysis tools, open and accessible to the scientific community. To this purpose it is instrumental to establish a software base, which will grow toward a comprehensive free and open-source language of technical and scientific computing. Endeavors in this direction are met with an important obstacle. MATLAB((R)), the predominant computation tool in many fields of research, is a closed-source commercial product. To facilitate the transition to an open computation platform, we propose Open-source MATLAB((R))-to-Python Compiler (OMPC), a platform that uses syntax adaptation and emulation to allow transparent import of existing MATLAB((R)) functions into Python programs. The imported MATLAB((R)) modules will run independently of MATLAB((R)), relying on Python's numerical and scientific libraries. Python offers a stable and mature open source platform that, in many respects, surpasses commonly used, expensive commercial closed source packages. The proposed software will therefore facilitate the transparent transition towards a free and general open-source lingua franca for scientific computation, while enabling access to the existing methods and algorithms of technical computing already available in MATLAB((R)). OMPC is available at http://ompc.juricap.com.

  15. MASCOT - MATLAB Stability and Control Toolbox

    Science.gov (United States)

    Kenny, Sean; Crespo, Luis

    2011-01-01

    MASCOT software was created to provide the conceptual aircraft designer accurate predictions of air vehicle stability and control characteristics. The code takes as input mass property data in the form of an inertia tensor, aerodynamic loading data, and propulsion (i.e. thrust) loading data. Using fundamental non-linear equations of motion, MASCOT then calculates vehicle trim and static stability data for any desired flight condition. Common predefined flight conditions are included. The predefined flight conditions include six horizontal and six landing rotation conditions with varying options for engine out, crosswind and sideslip, plus three takeoff rotation conditions. Results are displayed through a unique graphical interface developed to provide stability and control information to the conceptual design engineers using a qualitative scale indicating whether the vehicle has acceptable, marginal, or unacceptable static stability characteristics. This software allows the user to prescribe the vehicle s CG location, mass, and inertia tensor so that any loading configuration between empty weight and maximum take-off weight can be analyzed. The required geometric and aerodynamic data as well as mass and inertia properties may be entered directly, passed through data files, or come from external programs such as Vehicle Sketch Pad (VSP). The current version of MASCOT has been tested with VSP used to compute the required data, which is then passed directly into the program. In VSP, the vehicle geometry is created and manipulated. The aerodynamic coefficients, stability and control derivatives, are calculated using VorLax, which is now available directly within VSP. MASCOT has been written exclusively using the technical computing language MATLAB . This innovation is able to bridge the gap between low-fidelity conceptual design and higher-fidelity stability and control analysis. This new tool enables the conceptual design engineer to include detailed static stability

  16. GIS4schools: a new approach in GIS education

    Science.gov (United States)

    Demharter, Timo; Michel, Ulrich

    2012-10-01

    From a didactic point of view the procurement and the application of modern geographical methods and functions become more and more important. Although the integration of GIS in the classroom is repeatedly demanded, inter alia in Baden-Württemberg, Germany, the number of GIS users is small in comparison to other European countries or the USA. Possible reasons for this could, for instance, lie in the lack of GIS and computer knowledge of the teachers themselves and the subsequent extensive training effort in Desktop-GIS (KERSKI 2000, SCHLEICHER 2004). Today you have the technological possibilities to provide the broad public with geoinformation and geotechnology: Web technologies offer access to web-based, mobile and local applications through simple gateways. The objective of the project "GIS4schools" is to generate a service-based infrastructure, which can be operated via mobile clients as well as via Desktop-GIS or a Browser. Due to the easy availability of the services the focus is in particular on students. This circumstance is a novelty through which a differentiated approach to the implementation of GIS in schools is established. Accordingly, the pilot nature of this project becomes apparent as well as its greater importance beyond its actual content especially for the sector of media development at colleges of education. The continuity from Web-GIS to Desktop-GIS is innovative: The goal is to create an adapted multi-level solution which allows both, an easy introduction if desired or a detailed analysis - either to be achieved with a focus especially on students and their cooperation among one another.

  17. Programming for computations MATLAB/Octave : a gentle introduction to numerical simulations with MATLAB/Octave

    CERN Document Server

    Linge, Svein

    2016-01-01

    This book presents computer programming as a key method for solving mathematical problems. There are two versions of the book, one for MATLAB and one for Python. The book was inspired by the Springer book TCSE 6: A Primer on Scientific Programming with Python (by Langtangen), but the style is more accessible and concise, in keeping with the needs of engineering students. The book outlines the shortest possible path from no previous experience with programming to a set of skills that allows the students to write simple programs for solving common mathematical problems with numerical methods in engineering and science courses. The emphasis is on generic algorithms, clean design of programs, use of functions, and automatic tests for verification.

  18. VQone MATLAB toolbox: A graphical experiment builder for image and video quality evaluations: VQone MATLAB toolbox.

    Science.gov (United States)

    Nuutinen, Mikko; Virtanen, Toni; Rummukainen, Olli; Häkkinen, Jukka

    2016-03-01

    This article presents VQone, a graphical experiment builder, written as a MATLAB toolbox, developed for image and video quality ratings. VQone contains the main elements needed for the subjective image and video quality rating process. This includes building and conducting experiments and data analysis. All functions can be controlled through graphical user interfaces. The experiment builder includes many standardized image and video quality rating methods. Moreover, it enables the creation of new methods or modified versions from standard methods. VQone is distributed free of charge under the terms of the GNU general public license and allows code modifications to be made so that the program's functions can be adjusted according to a user's requirements. VQone is available for download from the project page (http://www.helsinki.fi/psychology/groups/visualcognition/).

  19. GRASS GIS: The first Open Source Temporal GIS

    Science.gov (United States)

    Gebbert, Sören; Leppelt, Thomas

    2015-04-01

    GRASS GIS is a full featured, general purpose Open Source geographic information system (GIS) with raster, 3D raster and vector processing support[1]. Recently, time was introduced as a new dimension that transformed GRASS GIS into the first Open Source temporal GIS with comprehensive spatio-temporal analysis, processing and visualization capabilities[2]. New spatio-temporal data types were introduced in GRASS GIS version 7, to manage raster, 3D raster and vector time series. These new data types are called space time datasets. They are designed to efficiently handle hundreds of thousands of time stamped raster, 3D raster and vector map layers of any size. Time stamps can be defined as time intervals or time instances in Gregorian calendar time or relative time. Space time datasets are simplifying the processing and analysis of large time series in GRASS GIS, since these new data types are used as input and output parameter in temporal modules. The handling of space time datasets is therefore equal to the handling of raster, 3D raster and vector map layers in GRASS GIS. A new dedicated Python library, the GRASS GIS Temporal Framework, was designed to implement the spatio-temporal data types and their management. The framework provides the functionality to efficiently handle hundreds of thousands of time stamped map layers and their spatio-temporal topological relations. The framework supports reasoning based on the temporal granularity of space time datasets as well as their temporal topology. It was designed in conjunction with the PyGRASS [3] library to support parallel processing of large datasets, that has a long tradition in GRASS GIS [4,5]. We will present a subset of more than 40 temporal modules that were implemented based on the GRASS GIS Temporal Framework, PyGRASS and the GRASS GIS Python scripting library. These modules provide a comprehensive temporal GIS tool set. The functionality range from space time dataset and time stamped map layer management

  20. Titanic exploration with GIS

    Science.gov (United States)

    Kerski, J.J.

    2004-01-01

    To help teachers and students investigate one of the world's most famous historical events using the geographic perspective and GIS tools and methods, the U.S. Geological Survey (USGS) created a set of educational lessons based on the RMS Titanic's April 1912 sailing. With these lessons, student researchers can learn about latitude and longitude, map projections, ocean currents, databases, maps, and images through the analysis of the route, warnings, sinking, rescue, and eventual discovery of the submerged ocean liner in 1985. They can also consider the human and physical aspects of the maiden voyage in the North Atlantic Ocean at a variety of scales, from global to regional to local. Likewise, their investigations can reveal how the sinking of the Titanic affected future shipping routes.

  1. Public Participation GIS

    DEFF Research Database (Denmark)

    Hansen, Henning Sten

    2004-01-01

    The protection and enhancement of the environment is the main aim of most environmental planning, and the use of geographic information as well as public participation can improve the quality of both the processes and the decisions. The current paper describes the role of web-based geographic...... information in environmental planning and gives an overview over the various approaches to public participation. The current advances in Web-based GIS in many countries contain great possibilities for supporting good governance based on information and knowledge on the one hand and active involvement...... of the citizens on the other hand. One important precondition for success in this field is a well-informed population with access to the Internet. The overall purpose of this paper is to give en overview of how to utilise geographic information and public participation as natural components in environmental...

  2. Interactive Effects of Instagram Foodies' Hashtagged #Foodporn and Peer Users' Eating Disorder on Eating Intention, Envy, Parasocial Interaction, and Online Friendship.

    Science.gov (United States)

    Jin, Seunga Venus

    2018-03-01

    Drawing from social comparison theory, parasocial interaction (PSI) theory, and the literature on envy, a randomized experiment addressed the dynamics of body image, fame, and envy in the context of foodies' foodporn posting on Instagram. Using a 2 (foodie's body type: fat vs. thin) × 2 (foodie's Instagram popularity: unpopular vs. popular) between-subjects design, this experiment (N = 141) examined the effects of an Instagram foodie's body shape and popularity level on peer Instagram users' eating intention, envy, and PSI with the Instagram foodie. The results showed main effects of an Instagram foodie's body shape on peer users' eating intention, and moderating effects of users' self-esteem, body mass index, perfectionism, anorexia, and bulimia nervosa. Additionally, envy mediated the effects of the Instagram foodie's body shape and popularity on peer users' PSI with the foodie and intention to build an Instagram-based friendship. Theoretical contributions to the literature on social comparison and eating disorder and practical implications for fitspiration and social media-based health interventions are discussed.

  3. The Effect of Perceived Spiritual Leadership on Envy Management of Faculty Members through the Role of Professional Development Mediation and Job Satisfaction

    Science.gov (United States)

    Haris, Zarin Daneshvar; Saidabadi, Reza Yousefi; Niazazari, Kiumars

    2016-01-01

    Purpose: the present study aimed to investigate the effect of perceived spiritual leadership on envy management of faculty members of Islamic Azad Universities of East Azerbaijan province through the role of professional development mediation and job satisfaction. Methodology: this study was a descriptive and correlational study that was conducted…

  4. Your Co-author Received 150 Citations: Pride, but Not Envy, Mediates the Effect of System-Generated Achievement Messages on Motivation.

    Science.gov (United States)

    Utz, Sonja; Muscanell, Nicole L

    2018-01-01

    ResearchGate, a social network site for academics, prominently displays the achievements of people one follows ("With 150 new reads, X was the most read author from their institute"). The goal of this paper was to examine the emotional and motivational effects of these system-generated messages, thereby extending prior research on envy-evoking status updates on Facebook to a professional context. We also extend the research on social comparisons and more broadly, on emotional responses elicited by social media. Specifically, social media research has largely focused on examining emotional reactions to content that is both generated by and is about others. In this research we directly examine updates generated by the system (ResearchGate) while also directly comparing reactions to updates about others' achievements with reactions to updates that are about the self-i.e., one's personal achievements which are also displayed on ResearchGate ("With 150 new reads, you were the most read author from your institute"). Particular attention was paid to the mediating role of envy and pride. The results of our quasi-experimental field study ( n = 419) showed that the achievements of others elicited envy, whereas personal achievements elicited pride. People exposed to their personal achievements (vs. the achievement of others) showed a higher motivation to work harder. This effect was mediated by pride, but not envy. The theoretical and practical implications of these findings are discussed.

  5. Your Co-author Received 150 Citations: Pride, but Not Envy, Mediates the Effect of System-Generated Achievement Messages on Motivation

    Science.gov (United States)

    Utz, Sonja; Muscanell, Nicole L.

    2018-01-01

    ResearchGate, a social network site for academics, prominently displays the achievements of people one follows (“With 150 new reads, X was the most read author from their institute”). The goal of this paper was to examine the emotional and motivational effects of these system-generated messages, thereby extending prior research on envy-evoking status updates on Facebook to a professional context. We also extend the research on social comparisons and more broadly, on emotional responses elicited by social media. Specifically, social media research has largely focused on examining emotional reactions to content that is both generated by and is about others. In this research we directly examine updates generated by the system (ResearchGate) while also directly comparing reactions to updates about others’ achievements with reactions to updates that are about the self—i.e., one’s personal achievements which are also displayed on ResearchGate (“With 150 new reads, you were the most read author from your institute”). Particular attention was paid to the mediating role of envy and pride. The results of our quasi-experimental field study (n = 419) showed that the achievements of others elicited envy, whereas personal achievements elicited pride. People exposed to their personal achievements (vs. the achievement of others) showed a higher motivation to work harder. This effect was mediated by pride, but not envy. The theoretical and practical implications of these findings are discussed. PMID:29780339

  6. Your Co-author Received 150 Citations: Pride, but Not Envy, Mediates the Effect of System-Generated Achievement Messages on Motivation

    Directory of Open Access Journals (Sweden)

    Sonja Utz

    2018-05-01

    Full Text Available ResearchGate, a social network site for academics, prominently displays the achievements of people one follows (“With 150 new reads, X was the most read author from their institute”. The goal of this paper was to examine the emotional and motivational effects of these system-generated messages, thereby extending prior research on envy-evoking status updates on Facebook to a professional context. We also extend the research on social comparisons and more broadly, on emotional responses elicited by social media. Specifically, social media research has largely focused on examining emotional reactions to content that is both generated by and is about others. In this research we directly examine updates generated by the system (ResearchGate while also directly comparing reactions to updates about others’ achievements with reactions to updates that are about the self—i.e., one’s personal achievements which are also displayed on ResearchGate (“With 150 new reads, you were the most read author from your institute”. Particular attention was paid to the mediating role of envy and pride. The results of our quasi-experimental field study (n = 419 showed that the achievements of others elicited envy, whereas personal achievements elicited pride. People exposed to their personal achievements (vs. the achievement of others showed a higher motivation to work harder. This effect was mediated by pride, but not envy. The theoretical and practical implications of these findings are discussed.

  7. Students individual engagement in GIS

    DEFF Research Database (Denmark)

    Madsen, Lene Møller; Christiansen, Frederik V; Rump, Camilla Østerberg

    2014-01-01

    This paper develops two sets of concepts to theorize why students engage differently in Geographical Information Systems (GIS). These theoretical concepts are used as an analytical lens to explore empirical data on the experiences and engagement of students enrolled in an undergraduate GIS course...... in planning and management. The analysis shows that both the theoretical perspectives and the custom and didactical contract are important to understand students' engagement in GIS. However, it is the personal desiderata that are the key to understanding the students' different engagement. Further, a temporal...... dimension and contextual awareness are important in understanding students' engagement in a broader perspective....

  8. Evaluating Mitigation Effects of Urban Heat Islands in a Historical Small Center with the ENVI-Met® Climate Model

    Directory of Open Access Journals (Sweden)

    Dario Ambrosini

    2014-10-01

    Full Text Available Urban morphology and increasing building density play a key role in the overall use of energy and promotion of environmental sustainability. The urban environment causes a local increase of temperature, a phenomenon known as Urban Heat Island (UHI. The purpose of this work is the study of the possible formation of an UHI and the evaluation of its magnitude, in the context of a small city, carried out with the ENVI-met® software. For this purpose, a simulation was needed, and this simulation is preparatory for a monitoring campaign on site, which will be held in the immediate future. ENVI-met® simulates the temporal evolution of several thermodynamics parameters on a micro-scale range, creating a 3D, non-hydrostatic model of the interactions between building-atmosphere-vegetation. The weather conditions applied simulate a typical Italian summer heat wave. Three different case-studies have been analyzed: Base Case, Cool Case and Green Case. Analysis of the actual state in the Base Case shows how even in an area with average building density, such as the old town center of a small city, fully developed UHI may rise with strong thermal gradients between built areas and open zones with plenty of vegetation. These gradients arise in a really tiny space (few hundreds of meters, showing that the influence of urban geometry can be decisive in the characterization of local microclimate. Simulations, carried out considering the application of green or cool roofs, showed small relevant effects as they become evident only in large areas heavily built up (metropolis subject to more intense climate conditions.

  9. Deterministic modelling and stochastic simulation of biochemical pathways using MATLAB.

    Science.gov (United States)

    Ullah, M; Schmidt, H; Cho, K H; Wolkenhauer, O

    2006-03-01

    The analysis of complex biochemical networks is conducted in two popular conceptual frameworks for modelling. The deterministic approach requires the solution of ordinary differential equations (ODEs, reaction rate equations) with concentrations as continuous state variables. The stochastic approach involves the simulation of differential-difference equations (chemical master equations, CMEs) with probabilities as variables. This is to generate counts of molecules for chemical species as realisations of random variables drawn from the probability distribution described by the CMEs. Although there are numerous tools available, many of them free, the modelling and simulation environment MATLAB is widely used in the physical and engineering sciences. We describe a collection of MATLAB functions to construct and solve ODEs for deterministic simulation and to implement realisations of CMEs for stochastic simulation using advanced MATLAB coding (Release 14). The program was successfully applied to pathway models from the literature for both cases. The results were compared to implementations using alternative tools for dynamic modelling and simulation of biochemical networks. The aim is to provide a concise set of MATLAB functions that encourage the experimentation with systems biology models. All the script files are available from www.sbi.uni-rostock.de/ publications_matlab-paper.html.

  10. Analysis of open source GIS software

    OpenAIRE

    Božnis, Andrius

    2006-01-01

    GIS is one of the most perspective information technology sciences sphere. GIS conjuncts the digital image analysis and data base systems. This makes GIS wide applicable and very high skills demanding system. There is a lot of commercial GIS software which is well advertised and which functionality is pretty well known, while open source software is forgotten. In this diploma work is made analysis of available open source GIS software on the Internet, in the scope of different projects interr...

  11. Programming ArcGIS with Python cookbook

    CERN Document Server

    Pimpler, Eric

    2015-01-01

    Programming ArcGIS with Python Cookbook, Second Edition, is written for GIS professionals who wish to revolutionize their ArcGIS workflow with Python. Whether you are new to ArcGIS or a seasoned professional, you almost certainly spend time each day performing various geoprocessing tasks. This book will teach you how to use the Python programming language to automate these geoprocessing tasks and make you a more efficient and effective GIS professional.

  12. Towards a GIS Evaluation Methodology

    African Journals Online (AJOL)

    sekuru

    Abstract. There is a growing use of Geographic Information Systems (GIS) within the public sector in ... decision making and in public policy formulation and implementation. From a public sector .... Directorate of Water Resources Management.

  13. GIS applications in riparian management

    Science.gov (United States)

    Carrie Christman; Douglas W. Shaw; Charles L. Spann; Penny Luehring

    1996-01-01

    GIS was used to prioritize watersheds for treatment needs across the USDA Forest Service Southwestern Region. Factors in this analysis included soil condition, riparian habitat, population centers and mining sites.

  14. Piezoelectric Actuator Modeling Using MSC/NASTRAN and MATLAB

    Science.gov (United States)

    Reaves, Mercedes C.; Horta, Lucas G.

    2003-01-01

    This paper presents a procedure for modeling structures containing piezoelectric actuators using MSCMASTRAN and MATLAB. The paper describes the utility and functionality of one set of validated modeling tools. The tools described herein use MSCMASTRAN to model the structure with piezoelectric actuators and a thermally induced strain to model straining of the actuators due to an applied voltage field. MATLAB scripts are used to assemble the dynamic equations and to generate frequency response functions. The application of these tools is discussed using a cantilever aluminum beam with a surface mounted piezoelectric actuator as a sample problem. Software in the form of MSCINASTRAN DMAP input commands, MATLAB scripts, and a step-by-step procedure to solve the example problem are provided. Analysis results are generated in terms of frequency response functions from deflection and strain data as a function of input voltage to the actuator.

  15. Effective approach to spectroscopy and spectral analysis techniques using Matlab

    Science.gov (United States)

    Li, Xiang; Lv, Yong

    2017-08-01

    With the development of electronic information, computer and network, modern education technology has entered new era, which would give a great impact on teaching process. Spectroscopy and spectral analysis is an elective course for Optoelectronic Information Science and engineering. The teaching objective of this course is to master the basic concepts and principles of spectroscopy, spectral analysis and testing of basic technical means. Then, let the students learn the principle and technology of the spectrum to study the structure and state of the material and the developing process of the technology. MATLAB (matrix laboratory) is a multi-paradigm numerical computing environment and fourth-generation programming language. A proprietary programming language developed by MathWorks, MATLAB allows matrix manipulations, plotting of functions and data, Based on the teaching practice, this paper summarizes the new situation of applying Matlab to the teaching of spectroscopy. This would be suitable for most of the current school multimedia assisted teaching

  16. Introduction to multifractal detrended fluctuation analysis in matlab.

    Science.gov (United States)

    Ihlen, Espen A F

    2012-01-01

    Fractal structures are found in biomedical time series from a wide range of physiological phenomena. The multifractal spectrum identifies the deviations in fractal structure within time periods with large and small fluctuations. The present tutorial is an introduction to multifractal detrended fluctuation analysis (MFDFA) that estimates the multifractal spectrum of biomedical time series. The tutorial presents MFDFA step-by-step in an interactive Matlab session. All Matlab tools needed are available in Introduction to MFDFA folder at the website www.ntnu.edu/inm/geri/software. MFDFA are introduced in Matlab code boxes where the reader can employ pieces of, or the entire MFDFA to example time series. After introducing MFDFA, the tutorial discusses the best practice of MFDFA in biomedical signal processing. The main aim of the tutorial is to give the reader a simple self-sustained guide to the implementation of MFDFA and interpretation of the resulting multifractal spectra.

  17. Elements of matrix modeling and computing with Matlab

    CERN Document Server

    White, Robert E

    2006-01-01

    As discrete models and computing have become more common, there is a need to study matrix computation and numerical linear algebra. Encompassing a diverse mathematical core, Elements of Matrix Modeling and Computing with MATLAB examines a variety of applications and their modeling processes, showing you how to develop matrix models and solve algebraic systems. Emphasizing practical skills, it creates a bridge from problems with two and three variables to more realistic problems that have additional variables. Elements of Matrix Modeling and Computing with MATLAB focuses on seven basic applicat

  18. KEGGParser: parsing and editing KEGG pathway maps in Matlab.

    Science.gov (United States)

    Arakelyan, Arsen; Nersisyan, Lilit

    2013-02-15

    KEGG pathway database is a collection of manually drawn pathway maps accompanied with KGML format files intended for use in automatic analysis. KGML files, however, do not contain the required information for complete reproduction of all the events indicated in the static image of a pathway map. Several parsers and editors of KEGG pathways exist for processing KGML files. We introduce KEGGParser-a MATLAB based tool for KEGG pathway parsing, semiautomatic fixing, editing, visualization and analysis in MATLAB environment. It also works with Scilab. The source code is available at http://www.mathworks.com/matlabcentral/fileexchange/37561.

  19. Rapid BeagleBoard prototyping with MATLAB and Simulink

    CERN Document Server

    Qin, Fei

    2013-01-01

    This book is a fast-paced guide with practical, hands-on recipes which will show you how to prototype Beagleboard-based audio/video applications using Matlab/Simlink and Sourcery Codebench on a Windows host.Beagleboard Embedded Projects is great for students and academic researchers who have practical ideas and who want to build a proof-of-concept system on an embedded hardware platform quickly and efficiently. It is also useful for product design engineers who want to ratify their applications and reduce the time-to-market. It is assumed that you are familiar with Matlab/Simulink and have som

  20. Kinematic simulation and analysis of robot based on MATLAB

    Science.gov (United States)

    Liao, Shuhua; Li, Jiong

    2018-03-01

    The history of industrial automation is characterized by quick update technology, however, without a doubt, the industrial robot is a kind of special equipment. With the help of MATLAB matrix and drawing capacity in the MATLAB environment each link coordinate system set up by using the d-h parameters method and equation of motion of the structure. Robotics, Toolbox programming Toolbox and GUIDE to the joint application is the analysis of inverse kinematics and path planning and simulation, preliminary solve the problem of college students the car mechanical arm positioning theory, so as to achieve the aim of reservation.

  1. Modelling real solar cell using PSCAD/MATLAB

    Energy Technology Data Exchange (ETDEWEB)

    Ramos, Sergio; Silva, Marco; Fernandes, Filipe; Vale, Zita [Polytechnic of Porto (Portugal). GECAD - Knowledge Engineering and Decision Support Research Center

    2012-07-01

    This paper presents the development of a solar photovoltaic (PV) model based on PSCAD/EMTDC - Power System Computer Aided Design - including a mathematical model study. An additional algorithm has been implemented in MATLAB software in order to calculate several parameters required by the PSCAD developed model. All the simulation study has been performed in PSCAD/MATLAB software simulation tool. A real data base concerning irradiance, cell temperature and PV power generation was used in order to support the evaluation of the implemented PV model. (orig.)

  2. Instruction of pattern recognition by MATLAB practice 1

    International Nuclear Information System (INIS)

    1999-06-01

    This book describes the pattern recognition by MATLAB practice. It includes possibility and limit of AI, introduction of pattern recognition a vector and matrix, basic status and a probability theory, a random variable and probability distribution, statistical decision theory, data-mining, gaussian mixture model, a nerve cell modeling such as Hebb's learning rule, LMS learning rule, genetic algorithm, dynamic programming and DTW, HMN on Markov model and HMM's three problems and solution, introduction of SVM with KKT condition and margin optimum, kernel trick and MATLAB practice.

  3. Estimating aquifer transmissivity from specific capacity using MATLAB.

    Science.gov (United States)

    McLin, Stephen G

    2005-01-01

    Historically, specific capacity information has been used to calculate aquifer transmissivity when pumping test data are unavailable. This paper presents a simple computer program written in the MATLAB programming language that estimates transmissivity from specific capacity data while correcting for aquifer partial penetration and well efficiency. The program graphically plots transmissivity as a function of these factors so that the user can visually estimate their relative importance in a particular application. The program is compatible with any computer operating system running MATLAB, including Windows, Macintosh OS, Linux, and Unix. Two simple examples illustrate program usage.

  4. TecDEM: A MATLAB Based Toolbox for understanding Tectonics from Digital Elevation Models

    Science.gov (United States)

    Shahzad, F.; Mahmood, S. A.; Gloaguen, R.

    2009-04-01

    TecDEM is a MATLAB based tool box for understanding the tectonics from digital elevation models (DEMs) of any area. These DEMs can be derived from data of any spatial resolution (Low, medium and High). In the first step we extract drainage network from the DEMs using flow grid approach. Drainage network is a group of streams having elevation and catchment area information as a function of spatial locations. We implement an array of stream structure to study this drainage network. Knickpoints can be identified on each stream of the drainage network by a graphical user interface and are helpful for understanding stream morphology. Stream profile analysis in steady state condition is applied on all streams to calculate geomorphic parameters and regional uplift rates. Hack index is calculated for all the profiles at a certain interval and over the change of knickpoints. Reports menu of this tool box generates detailed statistics report, complete tabulated report, graphical output of each analyzed stream profile and Hack index profile. All the calculated values are part of stream structure and is saved as .mat file for later use with this tool box. The spatial distribution of geomorphic parameters, uplift rates and knickpoints are exported as a shape files for visualization in professional GIS software. We test this tool box on DEMs from different tectonic settings worldwide and received verifiable results with other studies.

  5. Vectorized Matlab Codes for Linear Two-Dimensional Elasticity

    Directory of Open Access Journals (Sweden)

    Jonas Koko

    2007-01-01

    Full Text Available A vectorized Matlab implementation for the linear finite element is provided for the two-dimensional linear elasticity with mixed boundary conditions. Vectorization means that there is no loop over triangles. Numerical experiments show that our implementation is more efficient than the standard implementation with a loop over all triangles.

  6. A linear algebra course with PC-MATLAB : some experiences

    NARCIS (Netherlands)

    Smits, J.G.M.M.; Rijpkema, J.J.M.

    1992-01-01

    The authors present their views on the impact that the use of computers and software packages should have on the contents of a first service course on linear algebra. Furthermore they report on their experiences using the software package PC-MATLAB in such a course.

  7. Simulaser, a graphical laser simulator based on Matlab Simulink

    CSIR Research Space (South Africa)

    Jacobs, Cobus

    2016-07-01

    Full Text Available We present a single-element plane-wave laser rate equation model and its implementation as a graphical laser simulation library using Matlab Simulink. Simulink’s graphical interface and vector capabilities provide a unique layer of abstraction...

  8. Introduction of pattern recognition by MATLAB practice 2

    International Nuclear Information System (INIS)

    1999-06-01

    The contents of this book starts introduction and examples of pattern recognition. This book describes a vector and matrix, basic statistics and a probability distribution, statistical decision theory and probability density function, liner shunt, vector quantizing and clustering GMM, PCA and KL conversion, LDA, ID 3, a nerve cell modeling, HMM, SVM and Ada boost. It has direction of MATLAB in the appendix.

  9. MATLAB simulation for an experimental setup of digital feedback control

    International Nuclear Information System (INIS)

    Zheng Lifang; Liu Songqiang

    2005-01-01

    This paper describes the digital feedback simulation using MATLAB for an experimental accelerator control setup. By analyzing the plant characteristic in time-domain and frequency-domain, a guideline for design of digital filter and PID controller is derived. (authors)

  10. NNCTRL - a CANCSD toolkit for MATLAB(R)

    DEFF Research Database (Denmark)

    Nørgård, Peter Magnus; Ravn, Ole; Poulsen, Niels Kjølstad

    1996-01-01

    A set of tools for computer-aided neuro-control system design (CANCSD) has been developed for the MATLAB environment. The tools can be used for construction and simulation of a variety of neural network based control systems. The design methods featured in the toolkit are: direct inverse control...

  11. Benchmark Simulation Model No 2 in Matlab-Simulink

    DEFF Research Database (Denmark)

    Vrecko, Darko; Gernaey, Krist; Rosen, Christian

    2006-01-01

    In this paper, implementation of the Benchmark Simulation Model No 2 (BSM2) within Matlab-Simulink is presented. The BSM2 is developed for plant-wide WWTP control strategy evaluation on a long-term basis. It consists of a pre-treatment process, an activated sludge process and sludge treatment...

  12. UN OPEN GIS CAPACITY BUILDING

    Directory of Open Access Journals (Sweden)

    A. Albertella

    2017-07-01

    Full Text Available The UN Open GIS Initiative is to identify and develop, under UN guidance, an Open Source GIS bundle that meets the requirements of UN operations, taking full advantage of the expertise of mission partners (partner nations, technology contributing countries, international organizations, academia, NGO’s, private sector. The project, started in 2016, is composed by 4 working groups. One of the working group is specifically related to Capacity Building, given its importance for the success of the project. UN Open GIS will be based on some existing open source geospatial software (packages and libraries with many extensions specifically developed. The users of the platform will be the UN staff supporting with mapping and GIS the peacekeeping missions. Therefore, they are generally expert of this specific domain, even if they are currently using proprietary software. UN Open GIS Capacity Building is specifically thought for covering this gap, providing them the suitable background about open source geospatial software in general and the education tailored to the solution that has been being developed within the project itself.

  13. Open Source Power Plant Simulator Development Under Matlab Environment

    International Nuclear Information System (INIS)

    Ratemi, W.M.; Fadilah, S.M.; Abonoor, N

    2008-01-01

    In this paper an open source programming approach is targeted for the development of power plant simulator under Matlab environment. With this approach many individuals can contribute to the development of the simulator by developing different orders of complexities of the power plant components. Such modules can be modeled based on physical principles, or using neural networks or other methods. All of these modules are categorized in Matlab library, of which the user can select and build up his simulator. Many international companies developed its own authoring tool for the development of its simulators, and hence it became its own property available for high costs. Matlab is a general software developed by mathworks that can be used with its toolkits as the authoring tool for the development of components by different individuals, and through the appropriate coordination, different plant simulators, nuclear, traditional , or even research reactors can be computerly assembled. In this paper, power plant components such as a pressurizer, a reactor, a steam generator, a turbine, a condenser, a feedwater heater, a valve, a pump are modeled based on physical principles. Also a prototype modeling of a reactor ( a scram case) based on neural networks is developed. These modules are inserted in two different Matlab libraries one called physical and the other is called neural. Furthermore, during the simulation one can pause and shuffle the modules selected from the two libraries and then proceed the simulation. Also, under the Matlab environment a PID controller is developed for multi-loop plant which can be integrated for the control of the appropriate developed simulator. This paper is an attempt to base the open source approach for the development of power plant simulators or even research reactor simulators. It then requires the coordination among interested individuals or institutions to set it to professionalism. (author)

  14. MATLAB as a tool as Analysis and Problem Solving Competency Development in Chemical Engineering Degree using MATLAB

    Directory of Open Access Journals (Sweden)

    Maria-Fernanda López-Pérez

    2016-10-01

    The principal purpose of this work is the students improvement using, as has been mentioned previously, MATLAB in a problem-based learning methodology. This methodology allows a more effective coordination in the degree. The present paper presents a real- world problem and the common elements of most problem-solving contexts and how is designed to function across all disciplines.

  15. GIS in geoscience education- geomorphometric study

    Digital Repository Service at National Institute of Oceanography (India)

    Mahender, K.; Yogita, K.; Kunte, P.D.

    The educational institutions around the world have realised the possibility of using GIS in geosciences teaching along with in many other subjects. GIS is been used in a large number of geoscience applications viz. mapping, mineral and petroleum...

  16. GIS and radiological crisis management

    International Nuclear Information System (INIS)

    Kacenelen, Y.

    2009-01-01

    The author reports a new operational exercise performed on September 17, 2009 on the CEA Saclay site. For this purpose, the CEA (the French Atomic Energy Commission) developed M2IRAGE, a tool based on ArcGIS 9.3 technologies. This tool allows an easier data collection and exploitation in order to quickly map the distribution of radioactive particles and thus help the management of the health response and emergency organization within two hours after the warning. This tool notably uses a geographic information system (GIS)

  17. A web GIS based integrated flood assessment modeling tool for coastal urban watersheds

    Science.gov (United States)

    Kulkarni, A. T.; Mohanty, J.; Eldho, T. I.; Rao, E. P.; Mohan, B. K.

    2014-03-01

    Urban flooding has become an increasingly important issue in many parts of the world. In this study, an integrated flood assessment model (IFAM) is presented for the coastal urban flood simulation. A web based GIS framework has been adopted to organize the spatial datasets for the study area considered and to run the model within this framework. The integrated flood model consists of a mass balance based 1-D overland flow model, 1-D finite element based channel flow model based on diffusion wave approximation and a quasi 2-D raster flood inundation model based on the continuity equation. The model code is written in MATLAB and the application is integrated within a web GIS server product viz: Web Gram Server™ (WGS), developed at IIT Bombay, using Java, JSP and JQuery technologies. Its user interface is developed using open layers and the attribute data are stored in MySQL open source DBMS. The model is integrated within WGS and is called via Java script. The application has been demonstrated for two coastal urban watersheds of Navi Mumbai, India. Simulated flood extents for extreme rainfall event of 26 July, 2005 in the two urban watersheds of Navi Mumbai city are presented and discussed. The study demonstrates the effectiveness of the flood simulation tool in a web GIS environment to facilitate data access and visualization of GIS datasets and simulation results.

  18. Computational mathematics models, methods, and analysis with Matlab and MPI

    CERN Document Server

    White, Robert E

    2004-01-01

    Computational Mathematics: Models, Methods, and Analysis with MATLAB and MPI explores and illustrates this process. Each section of the first six chapters is motivated by a specific application. The author applies a model, selects a numerical method, implements computer simulations, and assesses the ensuing results. These chapters include an abundance of MATLAB code. By studying the code instead of using it as a "black box, " you take the first step toward more sophisticated numerical modeling. The last four chapters focus on multiprocessing algorithms implemented using message passing interface (MPI). These chapters include Fortran 9x codes that illustrate the basic MPI subroutines and revisit the applications of the previous chapters from a parallel implementation perspective. All of the codes are available for download from www4.ncsu.edu./~white.This book is not just about math, not just about computing, and not just about applications, but about all three--in other words, computational science. Whether us...

  19. Integration of Modeling in Solidworks and Matlab/Simulink Environments

    Directory of Open Access Journals (Sweden)

    Cekus Dawid

    2014-03-01

    Full Text Available W pracy opisano tok postepowania podczas budowy modeli symulacyjnych z wykorzystaniem programu SolidWorks i Matlab/Simulink. Tworzenie modelu symulacyjnego przebiega etapami, to znaczy najpierw opracowywany jest model geometryczny w programie SolidWorks, nastepnie dzieki mozliwosci wymiany danych, model CAD jest implementowany w srodowisku obliczeniowym Matlab/Simulink. Modele SimMechanics pozwalaja na sledzenie wielu parametrów, np. trajektorii, predkosci, czy przyspieszen dowolnych elementów układu złozonego. W pracy, jako przykłady modeli symulacyjnych opracowanych zgodnie z zaprezentowana metoda, pokazano modele laboratoryjnego zurawia samochodowego oraz zurawia lesnego. Modele te umozliwiaja wizualizacje zadanego - za pomoca wymuszen kinematycznych - cyklu pracy.

  20. Calcolo scientifico esercizi e problemi risolti con Matlab e Octave

    CERN Document Server

    Quarteroni, Alfio; Gervasio, Paola

    2017-01-01

    Questo testo è concepito per i corsi delle Facoltà di Ingegneria e di Scienze. Esso affronta tutti gli argomenti tipici della Matematica Numerica, spaziando dal problema di risolvere sistemi di equazioni lineari e non lineari a quello di approssimare una funzione, di calcolare i suoi minimi, le sue derivate ed il suo integrale definito fino alla risoluzione di equazioni differenziali ordinarie e alle derivate parziali con metodi alle differenze finite ed agli elementi finiti. Un capitolo iniziale conduce lo studente ad un rapido ripasso degli argomenti dell'Analisi Matematica e dell'Algebra Lineare di uso frequente nel volume e ad una introduzione ai linguaggi MATLAB e Octave. Al fine di rendere maggiormente incisiva la presentazione e fornire un riscontro quantitativo immediato alla teoria vengono implementati in linguaggio MATLAB e Octave tutti gli algoritmi che via via si introducono. Vengono inoltre proposti numerosi esercizi, tutti risolti per esteso, ed esempi, anche con riferimento ad applicazioni in...

  1. AIR Tools - A MATLAB package of algebraic iterative reconstruction methods

    DEFF Research Database (Denmark)

    Hansen, Per Christian; Saxild-Hansen, Maria

    2012-01-01

    We present a MATLAB package with implementations of several algebraic iterative reconstruction methods for discretizations of inverse problems. These so-called row action methods rely on semi-convergence for achieving the necessary regularization of the problem. Two classes of methods are impleme......We present a MATLAB package with implementations of several algebraic iterative reconstruction methods for discretizations of inverse problems. These so-called row action methods rely on semi-convergence for achieving the necessary regularization of the problem. Two classes of methods...... are implemented: Algebraic Reconstruction Techniques (ART) and Simultaneous Iterative Reconstruction Techniques (SIRT). In addition we provide a few simplified test problems from medical and seismic tomography. For each iterative method, a number of strategies are available for choosing the relaxation parameter...

  2. Digital signal processing for wireless communication using Matlab

    CERN Document Server

    Gopi, E S

    2016-01-01

    This book examines signal processing techniques used in wireless communication illustrated by using the Matlab program. The author discusses these techniques as they relate to Doppler spread; delay spread; Rayleigh and Rician channel modeling; rake receiver; diversity techniques; MIMO and OFDM -based transmission techniques; and array signal processing. Related topics such as detection theory, link budget, multiple access techniques, and spread spectrum are also covered.   ·         Illustrates signal processing techniques involved in wireless communication using Matlab ·         Discusses multiple access techniques such as Frequency division multiple access, Time division multiple access, and Code division multiple access ·         Covers band pass modulation techniques such as Binary phase shift keying, Differential phase shift keying, Quadrature phase shift keying, Binary frequency shift keying, Minimum shift keying, and Gaussian minimum shift keying.

  3. A Matlab Tool for Tumor Localization in Parathyroid Sestamibi Scintigraphy

    Directory of Open Access Journals (Sweden)

    M. Đurović

    2015-11-01

    Full Text Available Submarine method for localization of parathyroid tumors (PT has proved to be effective in case of typical pitfalls of conventional scintigraphic methods (combined subtraction and double phase methods. It uses images obtained by standard dynamic parathyroid sestamibi scintigraphy suggested by European Association of Nuclear Medicine. This paper presents: 1 the developed Matlab interface that enables the implementation and evaluation of algorithms for the automatic application of Submarine method; 2 the algorithm for automatic extraction of the entire thyroid region from the background radioactivity using operations from mathematical morphology applied on dynamic scintigrams; 3 the results obtained by algorithm for localization and visualization of PTs based on estimation of exponential decreasing trend of time-activity curves. The algorithm was tested on a group of 20 patients with histopathologically proven PTs using developed Matlab interface.

  4. MATLAB/SIMULINK model of CANDU reactor for control studies

    International Nuclear Information System (INIS)

    Javidnia, H.; Jiang, J.

    2006-01-01

    In this paper a MATLAB/SIMULINK model is developed for a CANDU type reactor. The data for the reactor are taken from an Indian PHWR, which is very similar to CANDU in its design. Among the different feedback mechanisms in the core of the reactor, only xenon has been considered which plays an important role in spatial oscillations. The model is verified under closed loop scenarios with simple PI controller. The results of the simulation show that this model can be used for controller design and simulation of the reactor systems. Adding models of the other components of a CANDU reactor would ultimately result in a complete model of CANDU plant in MATLAB/SIMULINK. (author)

  5. Scientific computing an introduction using Maple and Matlab

    CERN Document Server

    Gander, Walter; Kwok, Felix

    2014-01-01

    Scientific computing is the study of how to use computers effectively to solve problems that arise from the mathematical modeling of phenomena in science and engineering. It is based on mathematics, numerical and symbolic/algebraic computations and visualization. This book serves as an introduction to both the theory and practice of scientific computing, with each chapter presenting the basic algorithms that serve as the workhorses of many scientific codes; we explain both the theory behind these algorithms and how they must be implemented in order to work reliably in finite-precision arithmetic. The book includes many programs written in Matlab and Maple – Maple is often used to derive numerical algorithms, whereas Matlab is used to implement them. The theory is developed in such a way that students can learn by themselves as they work through the text. Each chapter contains numerous examples and problems to help readers understand the material “hands-on”.

  6. Slow Orbit Feedback at the ALS Using Matlab

    International Nuclear Information System (INIS)

    Portmann, G.

    1999-01-01

    The third generation Advanced Light Source (ALS) produces extremely bright and finely focused photon beams using undulatory, wigglers, and bend magnets. In order to position the photon beams accurately, a slow global orbit feedback system has been developed. The dominant causes of orbit motion at the ALS are temperature variation and insertion device motion. This type of motion can be removed using slow global orbit feedback with a data rate of a few Hertz. The remaining orbit motion in the ALS is only 1-3 micron rms. Slow orbit feedback does not require high computational throughput. At the ALS, the global orbit feedback algorithm, based on the singular valued decomposition method, is coded in MATLAB and runs on a control room workstation. Using the MATLAB environment to develop, test, and run the storage ring control algorithms has proven to be a fast and efficient way to operate the ALS

  7. First experience with the MATLAB Middle Layer at ANKA

    International Nuclear Information System (INIS)

    Marsching, S.; Huttel, E.; Klein, M.; Mueller, A.S.; Smale, N.J.

    2012-01-01

    ANKA is a synchrotron radiation facility at the Karlsruhe Institute of Technology. The MATLAB Middle Layer (MML) is a collection of scripts for the MATLAB programming environment, designed to control and measure parameters of an accelerator. MML has been adapted for use at ANKA and the commissioning process was quite simple and would have been even simpler if we had used one of the control systems directly supported by MML. At ANKA MML is used for accelerator physics studies and regular tasks like beam-based alignment and response matrix analysis using LOCO. Furthermore, we intend to study the MML as default orbit correction tool for user operation. We report on the experience made during the commissioning process and present the latest results obtained while using the MML for machine studies. MML simplifies the task of performing a beam-based alignment dramatically compared to our old solution which required the user to copy the measured data into specific files for further evaluation

  8. MATLAB based beam orbit correction system of HLS storage ring

    International Nuclear Information System (INIS)

    Ding Shichuan; Liu Gongfa; Xuan Ke; Li Weimin; Wang Lin; Wang Jigang; Li Chuan; Bao Xun; Guo Weiqun

    2006-01-01

    The distortion of closed orbit usually causes much side effect which is harmful to synchrotron radiation source such as HLS, so it is necessary to correct the distortion of closed orbit. In this paper, the correction principle, development procedure and test of MATLAB based on beam orbit correction system of HLS storage ring are described. The correction system is consisted of the beam orbit measure system, corrector magnet system and the control system, and the beam orbit correction code based on MATLAB is working on the operation interface. The data of the beam orbit are analyzed and calculated firstly, and then the orbit is corrected by changing corrector strength via control system. The test shows that the distortion of closed orbit is from max 4.468 mm before correction to max 0.299 mm after correction as well as SDEV is from 2.986 mm to 0.087 mm. So the correction system reaches the design goal. (authors)

  9. Research Reactor Power Control System Design by MATLAB/SIMULINK

    International Nuclear Information System (INIS)

    Baang, Dane; Suh, Yong Suk; Kim, Young Ki; Im, Ki Hong

    2013-01-01

    In this study it is presented that MATLAB/SIMULINK can be efficiently used for modeling and power control system design for research reactors. The presented power control system deals with various functions including reactivity control, signals processing, reactivity calculation, alarm request generation, etc., thus it is required to test all the software logic using proper model for reactor, control rods, and field instruments. In MATLAB/SIMULINK tool, point kinetics, thermal model, control absorber rod model, and other instrument models were developed based on reactor parameters and known properties of each component or system. The software for power control system was invented and linked to the model to test each function. From the simulation result it is shown that the power control performance and other functions of the system can be easily tested and analyzed in the proposed simulation structure

  10. Bogen om GIS og geodata

    DEFF Research Database (Denmark)

    Balstrøm, Thomas; Jacobi, Ole; Bodum, Lars

    OM INDHOLDET: Kort har gennem århundreder været brugt til at afbilde fænomener på vores runde Jord på papir, men i dagens IT-samfund håndteres de i computere ved brug af geografiske informationssystemer - forkortet GIS. I dem er det for eksempel muligt at koble kortinformationer med registeroplys......OM INDHOLDET: Kort har gennem århundreder været brugt til at afbilde fænomener på vores runde Jord på papir, men i dagens IT-samfund håndteres de i computere ved brug af geografiske informationssystemer - forkortet GIS. I dem er det for eksempel muligt at koble kortinformationer med...... kriterier osv. I systemerne findes der også værktøjer til beregning af korteste vej i vejnetværk og analyser på cellebaserede data som eksempelvis digitale højdemodeller. I denne første dansksprogede lærebog gives der en introduktion til de basale begreber i forståelsen af GIS eksemplificeret ved fokus på...... geodata i databaser, analysemetoder, kartografiske principper, metadata (data om data) og udvalgte eksempler på geodata til brug for den offentlige forvaltning, private virksomheder og borgere. Bogen afrundes med en perspektivering om mulighederne i fremtidens brug af GIS og geodata, som desværre ikke har...

  11. Spatial narratives from mobile GIS

    DEFF Research Database (Denmark)

    Møller-Jensen, Lasse

    2007-01-01

    Principles of a mobile gps-enabled gis acting as a tourist infor­mation sys­tem are discussed and exemplified with special focus on the narrative aspects of tourist guidance. Flexible adaptation to user movements is accomplished by providing information about objects that the user passes as well...

  12. BGS Radon Protective Measures GIS

    International Nuclear Information System (INIS)

    Appleton, D.; Adlam, K.

    2000-01-01

    The British Geological Survey Radon Protective Measures Geographical Information System is described. The following issues are highlighted: Identification of development sites where radon protection is required in new dwellings; Mapping radon potential on the basis of house radon and geology; Radon Protective Measures GIS; Radon site reports; and Follow-up radon protective measures sire reports

  13. The generation game: using GIS

    International Nuclear Information System (INIS)

    Mahony, C.D.

    1995-01-01

    The siting of wind farms is a controversial business: strong emotions often clash with practical considerations. In conjunction with GIS, a new set of criteria, developed using the Isle of Man as a model, offers the potential for a more objective approach. (Author)

  14. Processing of hyperspectral medical images applications in dermatology using Matlab

    CERN Document Server

    Koprowski, Robert

    2017-01-01

    This book presents new methods of analyzing and processing hyperspectral medical images, which can be used in diagnostics, for example for dermatological images. The algorithms proposed are fully automatic and the results obtained are fully reproducible. Their operation was tested on a set of several thousands of hyperspectral images and they were implemented in Matlab. The presented source code can be used without licensing restrictions. This is a valuable resource for computer scientists, bioengineers, doctoral students, and dermatologists interested in contemporary analysis methods.

  15. Online design of Matlab/Simulink block schemes

    Directory of Open Access Journals (Sweden)

    Zoltán Janík

    2011-04-01

    Full Text Available The paper presents a new online tool that enables to build a Matlab/Simulink block scheme in the Internet environment. The block scheme can be designed in similar manner as it is offered by local installation of Simulink. The application was created by widely used technologies as XHTML, CSS, JavaScript, PHP together with AJAX approach. The created application can be used as a supporting tool in virtual and remote laboratories.

  16. The Research of Histogram Enhancement Technique Based on Matlab Software

    Directory of Open Access Journals (Sweden)

    Li Kai

    2014-08-01

    Full Text Available Histogram enhancement technique has been widely applied as a typical pattern in digital image processing. The paper is based on Matlab software, through the two ways of histogram equalization and histogram specification technologies to deal with the darker images, using two methods of partial equilibrium and mapping histogram to transform the original histograms, thereby enhanced the image information. The results show that these two kinds of techniques both can significantly improve the image quality and enhance the image feature.

  17. AIR Tools - A MATLAB Package of Algebraic Iterative Reconstruction Techniques

    DEFF Research Database (Denmark)

    Hansen, Per Christian; Saxild-Hansen, Maria

    This collection of MATLAB software contains implementations of several Algebraic Iterative Reconstruction methods for discretizations of inverse problems. These so-called row action methods rely on semi-convergence for achieving the necessary regularization of the problem. Two classes of methods...... are implemented: Algebraic Reconstruction Techniques (ART) and Simultaneous Iterative Reconstruction Techniques (SIRT). In addition we provide a few simplified test problems from medical and seismic tomography. For each iterative method, a number of strategies are available for choosing the relaxation parameter...

  18. Applied Statistics Using SPSS, STATISTICA, MATLAB and R

    CERN Document Server

    De Sá, Joaquim P Marques

    2007-01-01

    This practical reference provides a comprehensive introduction and tutorial on the main statistical analysis topics, demonstrating their solution with the most common software package. Intended for anyone needing to apply statistical analysis to a large variety of science and enigineering problems, the book explains and shows how to use SPSS, MATLAB, STATISTICA and R for analysis such as data description, statistical inference, classification and regression, factor analysis, survival data and directional statistics. It concisely explains key concepts and methods, illustrated by practical examp

  19. Model of a photovoltaic panel emulator in MATLAB-Simulink

    OpenAIRE

    CAN, Hayrettin

    2014-01-01

    Being able to behave electrically similar to photovoltaic (PV) panels, PV emulator systems make it possible to perform different PV system tests under various operation conditions. In this paper, a model of a PV panel emulator is presented using the Power System Blockset under MATLAB-Simulink. The simulation of the emulator system is developed for testing a controller prior to a real-time implementation. The model can handle the dependence of all of the parameters in the model with ...

  20. Virtual experiment of optical spatial filtering in Matlab environment

    Science.gov (United States)

    Ji, Yunjing; Wang, Chunyong; Song, Yang; Lai, Jiancheng; Wang, Qinghua; Qi, Jing; Shen, Zhonghua

    2017-08-01

    The principle of spatial filtering experiment has been introduced, and the computer simulation platform with graphical user interface (GUI) has been made out in Matlab environment. Using it various filtering processes for different input image or different filtering purpose will be completed accurately, and filtering effect can be observed clearly with adjusting experimental parameters. The physical nature of the optical spatial filtering can be showed vividly, and so experimental teaching effect will be promoted.

  1. Matlab implementation of LASSO, LARS, the elastic net and SPCA

    DEFF Research Database (Denmark)

    2005-01-01

    There are a number of interesting variable selection methods available beside the regular forward selection and stepwise selection methods. Such approaches include LASSO (Least Absolute Shrinkage and Selection Operator), least angle regression (LARS) and elastic net (LARS-EN) regression. There al...... exists a method for calculating principal components with sparse loadings. This software package contains Matlab implementations of these functions. The standard implementations of these functions are available as add-on packages in S-Plus and R....

  2. Introduction to Artificial Vision through Laboratory Guides Using Matlab

    OpenAIRE

    Verónica Londoño-Osorio; Jhovana Marín-Pineda; Eliana I. Arango-Zuluaga

    2013-01-01

    This paper presents the design of two laboratory guides in artificial vision for a course which aims to introduce students to the different areas of specialization of his career. Therefore, the designed practices motivate and provide relevant content to the student, and to encourage research in the area of image processing. The first guide presents an introductory practice that explores the basic commands for image processing by programming a GUI in Matlab, and a second practice in which you ...

  3. Simulasi Teknik Modulasi Ofdm Qpsk Dengan Menggunakan Matlab

    OpenAIRE

    Subrata, Rosalia H; Gozali, Ferrianto

    2015-01-01

    This paper provides a brief explanation of the processing steps involved in Orthogonal Frequency Division Multiplexing (OFDM) with Quadrature Phase Shift Keying (QPSK) modulation technique implemented as a simulation program in MatLab. Input data of the simulation program in the form of random bit stream or text can be selected by users. The process conducted in the simulation is divided into three consecutive steps, processes in the OFDM transmitter, in transmission channel and in the OFDM r...

  4. Nonlinear distortion in wireless systems modeling and simulation with Matlab

    CERN Document Server

    Gharaibeh, Khaled M

    2011-01-01

    This book covers the principles of modeling and simulation of nonlinear distortion in wireless communication systems with MATLAB simulations and techniques In this book, the author describes the principles of modeling and simulation of nonlinear distortion in single and multichannel wireless communication systems using both deterministic and stochastic signals. Models and simulation methods of nonlinear amplifiers explain in detail how to analyze and evaluate the performance of data communication links under nonlinear amplification. The book addresses the analysis of nonlinear systems

  5. Matlab enhanced multi-threaded tomography optimization sequence (MEMTOS)

    International Nuclear Information System (INIS)

    Lum, Edward S.; Pope, Chad L.

    2016-01-01

    Highlights: • Monte Carlo simulation of spent nuclear fuel assembly neutron computed tomography. • Optimized parallel calculations conducted from within the MATLAB environment. • Projection difference technique used to identify anomalies in spent nuclear fuel assemblies. - Abstract: One challenge associated with spent nuclear fuel assemblies is the lack of non-destructive analysis techniques to determine if fuel pins have been removed or replaced or if there are significant defects associated with fuel pins deep within a fuel assembly. Neutron computed tomography is a promising technique for addressing these qualitative issues. Monte Carlo simulation of spent nuclear fuel neutron computed tomography allows inexpensive process investigation and optimization. The main purpose of this work is to provide a fully automated advanced simulation framework for the analysis of spent nuclear fuel inspection using neutron computed tomography. The simulation framework, called Matlab Enhanced Multi-Threaded Tomography Optimization Sequence (MEMTOS) not only automates the simulation process, but also generates superior tomography image results. MEMTOS is written in the MATLAB scripting language and addresses file management, parallel Monte Carlo execution, results extraction, and tomography image generation. This paper describes the mathematical basis for neutron computed tomography, the Monte Carlo technique used to simulate neutron computed tomography, and the overall tomography simulation optimization algorithm. Sequence results presented include overall simulation speed enhancement, tomography and image results obtained for Experimental Breeder Reactor II spent fuel assemblies and light water reactor fuel assemblies. Optimization using a projection difference technique are also described.

  6. MATLAB as an incentive for student learning of skills

    Science.gov (United States)

    Bank, C. G.; Ghent, R. R.

    2016-12-01

    Our course "Computational Geology" takes a holistic approach to student learning by using MATLAB as a focal point to increase students' computing, quantitative reasoning, data analysis, report writing, and teamwork skills. The course, taught since 2007 with recent enrollments around 35 and aimed at 2nd to 3rd-year students, is required for the Geology and Earth and Environmental Systems major programs, and can be chosen as elective in our other programs, including Geophysics. The course is divided into five projects: Pacific plate velocity from the Hawaiian hotspot track, predicting CO2 concentration in the atmosphere, volume of Earth's oceans and sea-level rise, comparing wind directions for Vancouver and Squamish, and groundwater flow. Each project is based on real data, focusses on a mathematical concept (linear interpolation, gradients, descriptive statistics, differential equations) and highlights a programming task (arrays, functions, text file input/output, curve fitting). Working in teams of three, students need to develop a conceptional model to explain the data, and write MATLAB code to visualize the data and match it to their conceptional model. The programming is guided, and students work individually on different aspects (for example: reading the data, fitting a function, unit conversion) which they need to put together to solve the problem. They then synthesize their thought process in a paper. Anecdotal evidence shows that students continue using MATLAB in other courses.

  7. Design of high-performance parallelized gene predictors in MATLAB.

    Science.gov (United States)

    Rivard, Sylvain Robert; Mailloux, Jean-Gabriel; Beguenane, Rachid; Bui, Hung Tien

    2012-04-10

    This paper proposes a method of implementing parallel gene prediction algorithms in MATLAB. The proposed designs are based on either Goertzel's algorithm or on FFTs and have been implemented using varying amounts of parallelism on a central processing unit (CPU) and on a graphics processing unit (GPU). Results show that an implementation using a straightforward approach can require over 4.5 h to process 15 million base pairs (bps) whereas a properly designed one could perform the same task in less than five minutes. In the best case, a GPU implementation can yield these results in 57 s. The present work shows how parallelism can be used in MATLAB for gene prediction in very large DNA sequences to produce results that are over 270 times faster than a conventional approach. This is significant as MATLAB is typically overlooked due to its apparent slow processing time even though it offers a convenient environment for bioinformatics. From a practical standpoint, this work proposes two strategies for accelerating genome data processing which rely on different parallelization mechanisms. Using a CPU, the work shows that direct access to the MEX function increases execution speed and that the PARFOR construct should be used in order to take full advantage of the parallelizable Goertzel implementation. When the target is a GPU, the work shows that data needs to be segmented into manageable sizes within the GFOR construct before processing in order to minimize execution time.

  8. A Collection of Nonlinear Aircraft Simulations in MATLAB

    Science.gov (United States)

    Garza, Frederico R.; Morelli, Eugene A.

    2003-01-01

    Nonlinear six degree-of-freedom simulations for a variety of aircraft were created using MATLAB. Data for aircraft geometry, aerodynamic characteristics, mass / inertia properties, and engine characteristics were obtained from open literature publications documenting wind tunnel experiments and flight tests. Each nonlinear simulation was implemented within a common framework in MATLAB, and includes an interface with another commercially-available program to read pilot inputs and produce a three-dimensional (3-D) display of the simulated airplane motion. Aircraft simulations include the General Dynamics F-16 Fighting Falcon, Convair F-106B Delta Dart, Grumman F-14 Tomcat, McDonnell Douglas F-4 Phantom, NASA Langley Free-Flying Aircraft for Sub-scale Experimental Research (FASER), NASA HL-20 Lifting Body, NASA / DARPA X-31 Enhanced Fighter Maneuverability Demonstrator, and the Vought A-7 Corsair II. All nonlinear simulations and 3-D displays run in real time in response to pilot inputs, using contemporary desktop personal computer hardware. The simulations can also be run in batch mode. Each nonlinear simulation includes the full nonlinear dynamics of the bare airframe, with a scaled direct connection from pilot inputs to control surface deflections to provide adequate pilot control. Since all the nonlinear simulations are implemented entirely in MATLAB, user-defined control laws can be added in a straightforward fashion, and the simulations are portable across various computing platforms. Routines for trim, linearization, and numerical integration are included. The general nonlinear simulation framework and the specifics for each particular aircraft are documented.

  9. PFA toolbox: a MATLAB tool for Metabolic Flux Analysis.

    Science.gov (United States)

    Morales, Yeimy; Bosque, Gabriel; Vehí, Josep; Picó, Jesús; Llaneras, Francisco

    2016-07-11

    Metabolic Flux Analysis (MFA) is a methodology that has been successfully applied to estimate metabolic fluxes in living cells. However, traditional frameworks based on this approach have some limitations, particularly when measurements are scarce and imprecise. This is very common in industrial environments. The PFA Toolbox can be used to face those scenarios. Here we present the PFA (Possibilistic Flux Analysis) Toolbox for MATLAB, which simplifies the use of Interval and Possibilistic Metabolic Flux Analysis. The main features of the PFA Toolbox are the following: (a) It provides reliable MFA estimations in scenarios where only a few fluxes can be measured or those available are imprecise. (b) It provides tools to easily plot the results as interval estimates or flux distributions. (c) It is composed of simple functions that MATLAB users can apply in flexible ways. (d) It includes a Graphical User Interface (GUI), which provides a visual representation of the measurements and their uncertainty. (e) It can use stoichiometric models in COBRA format. In addition, the PFA Toolbox includes a User's Guide with a thorough description of its functions and several examples. The PFA Toolbox for MATLAB is a freely available Toolbox that is able to perform Interval and Possibilistic MFA estimations.

  10. DSISoft—a MATLAB VSP data processing package

    Science.gov (United States)

    Beaty, K. S.; Perron, G.; Kay, I.; Adam, E.

    2002-05-01

    DSISoft is a public domain vertical seismic profile processing software package developed at the Geological Survey of Canada. DSISoft runs under MATLAB version 5.0 and above and hence is portable between computer operating systems supported by MATLAB (i.e. Unix, Windows, Macintosh, Linux). The package includes processing modules for reading and writing various standard seismic data formats, performing data editing, sorting, filtering, and other basic processing modules. The processing sequence can be scripted allowing batch processing and easy documentation. A structured format has been developed to ensure future additions to the package are compatible with existing modules. Interactive modules have been created using MATLAB's graphical user interface builder for displaying seismic data, picking first break times, examining frequency spectra, doing f- k filtering, and plotting the trace header information. DSISoft modular design facilitates the incorporation of new processing algorithms as they are developed. This paper gives an overview of the scope of the software and serves as a guide for the addition of new modules.

  11. Teaching with ArcGIS Pro

    OpenAIRE

    Theller, Larry

    2016-01-01

    For Fall semester 2016 the ABE department moved the course ASM 540 Basic GIS from ArcGIS Desktop 10.2 to ArcGIS Pro 1.3. This software from ESRI has a completely new look and feel, (ribbon-based rather than cascading menus) and is a true 64 bit application, capable of multi-threading, and built on Python 3. After ArcGIS Desktop 10.5 is released, desktop ends and the future release will be ArcGIS Pro; so it makes sense to switch sooner rather than later. This talk will discuss some issues and...

  12. A DISTRIBUTED HYPERMAP MODEL FOR INTERNET GIS

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The rapid development of Internet technology makes it possible to integrate GIS with the Internet,forming Internet GIS.Internet GIS is based on a distributed client/server architecture and TCP/IP & IIOP.When constructing and designing Internet GIS,we face the problem of how to express information units of Internet GIS.In order to solve this problem,this paper presents a distributed hypermap model for Internet GIS.This model provides a solution to organize and manage Internet GIS information units.It also illustrates relations between two information units and in an internal information unit both on clients and servers.On the basis of this model,the paper contributes to the expressions of hypermap relations and hypermap operations.The usage of this model is shown in the implementation of a prototype system.

  13. A Compilation of MATLAB Scripts and Functions for MACGMC Analyses

    Science.gov (United States)

    Murthy, Pappu L. N.; Bednarcyk, Brett A.; Mital, Subodh K.

    2017-01-01

    The primary aim of the current effort is to provide scripts that automate many of the repetitive pre- and post-processing tasks associated with composite materials analyses using the Micromechanics Analysis Code with the Generalized Method of Cells. This document consists of a compilation of hundreds of scripts that were developed in MATLAB (The Mathworks, Inc., Natick, MA) programming language and consolidated into 16 MATLAB functions. (MACGMC). MACGMC is a composite material and laminate analysis software code developed at NASA Glenn Research Center. The software package has been built around the generalized method of cells (GMC) family of micromechanics theories. The computer code is developed with a user-friendly framework, along with a library of local inelastic, damage, and failure models. Further, application of simulated thermo-mechanical loading, generation of output results, and selection of architectures to represent the composite material have been automated to increase the user friendliness, as well as to make it more robust in terms of input preparation and code execution. Finally, classical lamination theory has been implemented within the software, wherein GMC is used to model the composite material response of each ply. Thus, the full range of GMC composite material capabilities is available for analysis of arbitrary laminate configurations as well. The pre-processing tasks include generation of a multitude of different repeating unit cells (RUCs) for CMCs and PMCs, visualization of RUCs from MACGMC input and output files and generation of the RUC section of a MACGMC input file. The post-processing tasks include visualization of the predicted composite response, such as local stress and strain contours, damage initiation and progression, stress-strain behavior, and fatigue response. In addition to the above, several miscellaneous scripts have been developed that can be used to perform repeated Monte-Carlo simulations to enable probabilistic

  14. Determining of the morpholithology types in the Kamchia River basin (Eastern Bulgaria by means of geographic information system (GIS

    Directory of Open Access Journals (Sweden)

    Nikolova Valentina

    2010-01-01

    Full Text Available The article presents the morpholithology types in the Kamchia River basin (Eastern Bulgaria - the catchment area of the largest Bulgarian river which flows into the Black Sea. These types are determined on the base of information about the relief and lithological substrate. The rocks in the investigated area are divided into groups accord­ing to their physical-mechanical and chemical composition, and the relief types are determined in regards to the morphographic features of the catchment area. The research is done on the base of geological and topographic maps in scale 1:200 000 and also terrain observations are taken into account. As a result of the research a map of morpholithological types (1:200 000 is made. The map shows a considerable variety of the morpholithological types in the Kamchia River basin. This variety determines the appearance of the territory and also influences on the landscape differentiation. The analyses and composition of the morpholithology map are done in GIS envi­ronment. For that purpose a GIS database of lithology and relief (topography of the Kamchia River basin is built as spatial 'overlay' analysis is done.

  15. Spatial narratives from mobile GIS

    DEFF Research Database (Denmark)

    Møller-Jensen, Lasse

    2007-01-01

    Principles of a mobile gps-enabled gis acting as a tourist infor­mation sys­tem are discussed and exemplified with special focus on the narrative aspects of tourist guidance. Flexible adaptation to user movements is accomplished by providing information about objects that the user passes as well......-study of H.C. Andersen's residences in Copen­hagen...

  16. GUI development for GRASS GIS

    Directory of Open Access Journals (Sweden)

    Martin Landa

    2007-12-01

    Full Text Available This article discusses GUI development for GRASS GIS. Sophisticated native GUI for GRASS is one of the key points (besides the new 2D/3D raster library, vector architecture improvements, etc. for the future development of GRASS. In 2006 the GRASS development team decided to start working on the new generation of GUI instead of improving the current GUI based on Tcl/Tk.

  17. SIGNUM: A Matlab, TIN-based landscape evolution model

    Science.gov (United States)

    Refice, A.; Giachetta, E.; Capolongo, D.

    2012-08-01

    Several numerical landscape evolution models (LEMs) have been developed to date, and many are available as open source codes. Most are written in efficient programming languages such as Fortran or C, but often require additional code efforts to plug in to more user-friendly data analysis and/or visualization tools to ease interpretation and scientific insight. In this paper, we present an effort to port a common core of accepted physical principles governing landscape evolution directly into a high-level language and data analysis environment such as Matlab. SIGNUM (acronym for Simple Integrated Geomorphological Numerical Model) is an independent and self-contained Matlab, TIN-based landscape evolution model, built to simulate topography development at various space and time scales. SIGNUM is presently capable of simulating hillslope processes such as linear and nonlinear diffusion, fluvial incision into bedrock, spatially varying surface uplift which can be used to simulate changes in base level, thrust and faulting, as well as effects of climate changes. Although based on accepted and well-known processes and algorithms in its present version, it is built with a modular structure, which allows to easily modify and upgrade the simulated physical processes to suite virtually any user needs. The code is conceived as an open-source project, and is thus an ideal tool for both research and didactic purposes, thanks to the high-level nature of the Matlab environment and its popularity among the scientific community. In this paper the simulation code is presented together with some simple examples of surface evolution, and guidelines for development of new modules and algorithms are proposed.

  18. Curtain Antenna Array Simulation Research Based on MATLAB

    Directory of Open Access Journals (Sweden)

    Hongbo LIU

    2014-01-01

    Full Text Available For the radiating capacity of curtain antenna array, this paper constructs a three- line-four-column curtain antenna array using cage antenna as the antenna array element and obtains a normalizing 3D radiation patterns through conducting simulation with MATLAB. Meanwhile, the relationships between the antenna spacing and the largest directivity coefficient, as well as the communication frequency and largest directivity coefficient are analyzed in this paper. It turns out that the max value will generate when the antenna spacing is around 18 m and the best communication effect will be achieved when the communication frequency is about 12.4 MHz.

  19. PEM fuel cell modeling and simulation using Matlab

    CERN Document Server

    Spiegel, Colleen

    2011-01-01

    Although, the basic concept of a fuel cell is quite simple, creating new designs and optimizing their performance takes serious work and a mastery of several technical areas. PEM Fuel Cell Modeling and Simulation Using Matlab, provides design engineers and researchers with a valuable tool for understanding and overcoming barriers to designing and building the next generation of PEM Fuel Cells. With this book, engineers can test components and verify designs in the development phase, saving both time and money.Easy to read and understand, this book provides design and modelling tips for

  20. Obtención de curvas de residuo con Matlab

    OpenAIRE

    Barrio García-Parra, Marco Bruno del

    2017-01-01

    Los diagramas de curvas de residuo son una herramienta cualitativa que permite una mejor comprensión de los procesos físicos que se dan en la destilación de sistemas multicomponente. Una curva de residuo representa la evolución de la composición de una mezcla líquida según se va evaporando y retirando el vapor producido resultante de la ebullición. En este trabajo se expone la metodología, resultados y conclusiones que han llevado a la obtención de curvas de residuo con Matlab® en sistema...

  1. ADAMS-MATLAB Co-Simulation of A Serial Manipulator

    Directory of Open Access Journals (Sweden)

    Parthasarathy Tejaswin

    2017-01-01

    Full Text Available This paper presents the dynamic modelling and simulation of a now redundant robot, Mitsubishi RM-501, and proposes a general algorithm for experimental simulation in kinematics, dynamics and control analysis to any such robot. Through reverse engineering, a model as accurate as the real robot was developed in SolidWorks.The simulations of the same were performed in ADAMS (dynamicmodeling software offered by MSC Software Corpalong with MATLAB for motion studies and control dynamics. Finally, with a user-input path the accuracy and precision of the simulator was verified.

  2. Development of Integral Environment in Matlab/Simulink for FPGA

    Directory of Open Access Journals (Sweden)

    Dejan Jokic

    2014-01-01

    Full Text Available In this paper is presented realization of integral environment which consists of software and hardware components for the purpose of programming Altera DE boards. Software component is Toolbox FPGA Real Time which enables simple use of Matlab/Simulink with DSP Builder for the purpose of realization of control structures. Hardware component are Interface cards that make connection of DE board with object of control possible. Simulation and experimental results of DC motor control indicate the usefulness of the proposed concept.

  3. Discrete random signal processing and filtering primer with Matlab

    CERN Document Server

    Poularikas, Alexander D

    2013-01-01

    Engineers in all fields will appreciate a practical guide that combines several new effective MATLAB® problem-solving approaches and the very latest in discrete random signal processing and filtering.Numerous Useful Examples, Problems, and Solutions - An Extensive and Powerful ReviewWritten for practicing engineers seeking to strengthen their practical grasp of random signal processing, Discrete Random Signal Processing and Filtering Primer with MATLAB provides the opportunity to doubly enhance their skills. The author, a leading expert in the field of electrical and computer engineering, offe

  4. Image processing tensor transform and discrete tomography with Matlab

    CERN Document Server

    Grigoryan, Artyom M

    2012-01-01

    Focusing on mathematical methods in computer tomography, Image Processing: Tensor Transform and Discrete Tomography with MATLAB(R) introduces novel approaches to help in solving the problem of image reconstruction on the Cartesian lattice. Specifically, it discusses methods of image processing along parallel rays to more quickly and accurately reconstruct images from a finite number of projections, thereby avoiding overradiation of the body during a computed tomography (CT) scan. The book presents several new ideas, concepts, and methods, many of which have not been published elsewhere. New co

  5. Differential equations with Matlab exploration, applications, and theory

    CERN Document Server

    McKibben, Mark

    2014-01-01

    ORDINARY DIFFERENTIAL EQUATIONS Welcome! Introduction This Book Is a Field Guide. What Does That Mean for YOU? Mired in Jargon - A Quick Language Lesson! Introducing MATLAB A First Look at Some Elementary Mathematical Models A Basic Analysis Toolbox Some Basic Mathematical Shorthand Set Algebra Functions The Space (R; j_j) A Closer Look at Sequences in (R; j_j) The Spaces (RN; k_kRN ) and (MN(R); k_kMN(R)Calculus of RN-valued and MN(R)-valued FunctionsSome Elementary ODEs Looking Ahead A First Wave of Mathematical Models Newton's Law of Heating and Cooling-Revisited Pharmocokinetics Uniform Mi

  6. Causes of maternal mortality decline in Matlab, Bangladesh.

    Science.gov (United States)

    Chowdhury, Mahbub Elahi; Ahmed, Anisuddin; Kalim, Nahid; Koblinsky, Marge

    2009-04-01

    Bangladesh is distinct among developing countries in achieving a low maternal mortality ratio (MMR) of 322 per 100,000 livebirths despite the very low use of skilled care at delivery (13% nationally). This variation has also been observed in Matlab, a rural area in Bangladesh, where longitudinal data on maternal mortality are available since the mid-1970s. The current study investigated the possible causes of the maternal mortality decline in Matlab. The study analyzed 769 maternal deaths and 215,779 pregnancy records from the Health and Demographic Surveillance System (HDSS) and other sources of safe motherhood data in the ICDDR,B and government service areas in Matlab during 1976-2005. The major interventions that took place in both the areas since the early 1980s were the family-planning programme plus safe menstrual regulation services and safe motherhood interventions (midwives for normal delivery in the ICDDR,B service area from the late 1980s and equal access to comprehensive emergency obstetric care [EmOC] in public facilities for women from both the areas). National programmes for social development and empowerment of women through education and microcredit programmes were implemented in both the areas. The quantitative findings were supplemented by a qualitative study by interviewing local community care providers for their change in practices for maternal healthcare over time. After the introduction of the safe motherhood programme, reduction in maternal mortality was higher in the ICDDR,B service area (68.6%) than in the government service area (50.4%) during 1986-1989 and 2001-2005. Reduction in the number of maternal deaths due to the fertility decline was higher in the government service area (30%) than in the ICDDR,B service area (23%) during 1979-2005. In each area, there has been substantial reduction in abortion-related mortality--86.7% and 78.3%--in the ICDDR,B and government service areas respectively. Education of women was a strong predictor

  7. SBEToolbox: A Matlab Toolbox for Biological Network Analysis.

    Science.gov (United States)

    Konganti, Kranti; Wang, Gang; Yang, Ence; Cai, James J

    2013-01-01

    We present SBEToolbox (Systems Biology and Evolution Toolbox), an open-source Matlab toolbox for biological network analysis. It takes a network file as input, calculates a variety of centralities and topological metrics, clusters nodes into modules, and displays the network using different graph layout algorithms. Straightforward implementation and the inclusion of high-level functions allow the functionality to be easily extended or tailored through developing custom plugins. SBEGUI, a menu-driven graphical user interface (GUI) of SBEToolbox, enables easy access to various network and graph algorithms for programmers and non-programmers alike. All source code and sample data are freely available at https://github.com/biocoder/SBEToolbox/releases.

  8. Automatic analysis of intrinsic positional verification films brachytherapy using MATLAB

    International Nuclear Information System (INIS)

    Quiros Higueras, J. D.; Marco Blancas, N. de; Ruiz Rodriguez, J. C.

    2011-01-01

    One of the essential tests in quality control of brachytherapy equipment is verification auto load intrinsic positional radioactive source. A classic method for evaluation is the use of x-ray film and measuring the distance between the marks left by autoradiography of the source with respect to a reference. In our center has developed an automated method of measurement by the radiochromic film scanning and implementation of a macro developed in Matlab, in order to optimize time and reduce uncertainty in the measurement. The purpose of this paper is to describe the method developed, assess their uncertainty and quantify their advantages over the manual method. (Author)

  9. Efficient topology optimization in MATLAB using 88 lines of code

    DEFF Research Database (Denmark)

    Andreassen, Erik; Clausen, Anders; Schevenels, Mattias

    2011-01-01

    The paper presents an efficient 88 line MATLAB code for topology optimization. It has been developed using the 99 line code presented by Sigmund (Struct Multidisc Optim 21(2):120–127, 2001) as a starting point. The original code has been extended by a density filter, and a considerable improvemen...... of the basic code to include recent PDE-based and black-and-white projection filtering methods. The complete 88 line code is included as an appendix and can be downloaded from the web site www.topopt.dtu.dk....

  10. Black Sea GIS developed in MHI

    Science.gov (United States)

    Zhuk, E.; Khaliulin, A.; Zodiatis, G.; Nikolaidis, A.; Isaeva, E.

    2016-08-01

    The work aims at creating the Black Sea geoinformation system (GIS) and complementing it with a model bank. The software for data access and visualization was developed using client server architecture. A map service based on MapServer and MySQL data management system were chosen for the Black Sea GIS. Php-modules and python-scripts are used to provide data access, processing, and exchange between the client application and the server. According to the basic data types, the module structure of GIS was developed. Each type of data is matched to a module which allows selection and visualization of the data. At present, a GIS complement with a model bank (the models build in to the GIS) and users' models (programs launched on users' PCs but receiving and displaying data via GIS) is developed.

  11. Teaching Thousands with Cloud-based GIS

    Science.gov (United States)

    Gould, Michael; DiBiase, David; Beale, Linda

    2016-04-01

    Teaching Thousands with Cloud-based GIS Educators often draw a distinction between "teaching about GIS" and "teaching with GIS." Teaching about GIS involves helping students learn what GIS is, what it does, and how it works. On the other hand, teaching with GIS involves using the technology as a means to achieve education objectives in the sciences, social sciences, professional disciplines like engineering and planning, and even the humanities. The same distinction applies to CyberGIS. Understandably, early efforts to develop CyberGIS curricula and educational resources tend to be concerned primarily with CyberGIS itself. However, if CyberGIS becomes as functional, usable and scalable as it aspires to be, teaching with CyberGIS has the potential to enable large and diverse global audiences to perform spatial analysis using hosted data, mapping and analysis services all running in the cloud. Early examples of teaching tens of thousands of students across the globe with cloud-based GIS include the massive open online courses (MOOCs) offered by Penn State University and others, as well as the series of MOOCs more recently developed and offered by Esri. In each case, ArcGIS Online was used to help students achieve educational objectives in subjects like business, geodesign, geospatial intelligence, and spatial analysis, as well as mapping. Feedback from the more than 100,000 total student participants to date, as well as from the educators and staff who supported these offerings, suggest that online education with cloud-based GIS is scalable to very large audiences. Lessons learned from the course design, development, and delivery of these early examples may be useful in informing the continuing development of CyberGIS education. While MOOCs may have passed the peak of their "hype cycle" in higher education, the phenomenon they revealed persists: namely, a global mass market of educated young adults who turn to free online education to expand their horizons. The

  12. Implementation av spridningsmodell i ArcGIS

    OpenAIRE

    Jou, Javid

    2012-01-01

    The project involves implementing a finished dispersion model into ArcGIS. The goal of the tool is to show how dangerous and toxic substances will travel in the ground after long periods. The goal of the project is to understand GIS in general, what it is used for and gain an insight into how developing tools for ArcGIS is, what challenges might exists. Understanding the type of data that can be stored and accessed in ArcGIS a long with the tools and functionality offered by the system when u...

  13. Digital Signal Processing for Medical Imaging Using Matlab

    CERN Document Server

    Gopi, E S

    2013-01-01

    This book describes medical imaging systems, such as X-ray, Computed tomography, MRI, etc. from the point of view of digital signal processing. Readers will see techniques applied to medical imaging such as Radon transformation, image reconstruction, image rendering, image enhancement and restoration, and more. This book also outlines the physics behind medical imaging required to understand the techniques being described. The presentation is designed to be accessible to beginners who are doing research in DSP for medical imaging. Matlab programs and illustrations are used wherever possible to reinforce the concepts being discussed.  ·         Acts as a “starter kit” for beginners doing research in DSP for medical imaging; ·         Uses Matlab programs and illustrations throughout to make content accessible, particularly with techniques such as Radon transformation and image rendering; ·         Includes discussion of the basic principles behind the various medical imaging tec...

  14. KiT: a MATLAB package for kinetochore tracking.

    Science.gov (United States)

    Armond, Jonathan W; Vladimirou, Elina; McAinsh, Andrew D; Burroughs, Nigel J

    2016-06-15

    During mitosis, chromosomes are attached to the mitotic spindle via large protein complexes called kinetochores. The motion of kinetochores throughout mitosis is intricate and automated quantitative tracking of their motion has already revealed many surprising facets of their behaviour. Here, we present 'KiT' (Kinetochore Tracking)-an easy-to-use, open-source software package for tracking kinetochores from live-cell fluorescent movies. KiT supports 2D, 3D and multi-colour movies, quantification of fluorescence, integrated deconvolution, parallel execution and multiple algorithms for particle localization. KiT is free, open-source software implemented in MATLAB and runs on all MATLAB supported platforms. KiT can be downloaded as a package from http://www.mechanochemistry.org/mcainsh/software.php The source repository is available at https://bitbucket.org/jarmond/kit and under continuing development. Supplementary data are available at Bioinformatics online. jonathan.armond@warwick.ac.uk. © The Author 2016. Published by Oxford University Press.

  15. Solution of the reactor point kinetics equations by MATLAB computing

    Directory of Open Access Journals (Sweden)

    Singh Sudhansu S.

    2015-01-01

    Full Text Available The numerical solution of the point kinetics equations in the presence of Newtonian temperature feedback has been a challenging issue for analyzing the reactor transients. Reactor point kinetics equations are a system of stiff ordinary differential equations which need special numerical treatments. Although a plethora of numerical intricacies have been introduced to solve the point kinetics equations over the years, some of the simple and straightforward methods still work very efficiently with extraordinary accuracy. As an example, it has been shown recently that the fundamental backward Euler finite difference algorithm with its simplicity has proven to be one of the most effective legacy methods. Complementing the back-ward Euler finite difference scheme, the present work demonstrates the application of ordinary differential equation suite available in the MATLAB software package to solve the stiff reactor point kinetics equations with Newtonian temperature feedback effects very effectively by analyzing various classic benchmark cases. Fair accuracy of the results implies the efficient application of MATLAB ordinary differential equation suite for solving the reactor point kinetics equations as an alternate method for future applications.

  16. Humbo Woreda Envi

    African Journals Online (AJOL)

    USER

    2017-05-11

    May 11, 2017 ... this is greater than most ma or towns of Ethiopia. The ma or sources of ... is an important challenge for countries across the ... Education Training (TVET) college teachers; three public health officers and ..... city profile. The 6 th.

  17. Collaborative Planetary GIS with JMARS

    Science.gov (United States)

    Dickenshied, S.; Christensen, P. R.; Edwards, C. S.; Prashad, L. C.; Anwar, S.; Engle, E.; Noss, D.; Jmars Development Team

    2010-12-01

    Traditional GIS tools have allowed users to work locally with their own datasets in their own computing environment. More recently, data providers have started offering online repositories of preprocessed data which helps minimize the learning curve required to access new datasets. The ideal collaborative GIS tool provides the functionality of a traditional GIS and easy access to preprocessed data repositories while also enabling users to contribute data, analysis, and ideas back into the very tools they're using. JMARS (Java Mission-planning and Analysis for Remote Sensing) is a suite of geospatial applications developed by the Mars Space Flight Facility at Arizona State University. This software is used for mission planning and scientific data analysis by several NASA missions, including Mars Odyssey, Mars Reconnaissance Orbiter, and the Lunar Reconnaissance Orbiter. It is used by scientists, researchers and students of all ages from more than 40 countries around the world. In addition to offering a rich set of global and regional maps and publicly released orbiter images, the JMARS software development team has been working on ways to encourage the creation of collaborative datasets. Bringing together users from diverse teams and backgrounds allows new features to be developed with an interest in making the application useful and accessible to as wide a potential audience as possible. Actively engaging the scientific community in development strategy and hands on tasks allows the creation of user driven data content that would not otherwise be possible. The first community generated dataset to result from this effort is a tool mapping peer-reviewed papers to the locations they relate to on Mars with links to ancillary data. This allows users of JMARS to browse to an area of interest and then quickly locate papers corresponding to that area. Alternately, users can search for published papers over a specified time interval and visually see what areas of Mars have

  18. Use NASA GES DISC Data in ArcGIS

    Science.gov (United States)

    Yang, Wenli; Pham, Long B.; Kempler, Steve

    2015-01-01

    This presentation describes GIS relevant data at NASA Goddard Earth Sciences Data and Information Services Center (GES DISC), GES DISC Services and Support for GIS Users, and use cases of GES DISC data in ArcGIS.

  19. Development of MATLAB Scripts for the Calculation of Thermal Manikin Regional Resistance Values

    Science.gov (United States)

    2016-01-01

    TECHNICAL NOTE NO. TN16-1 DATE January 2016 ADA DEVELOPMENT OF MATLAB ® SCRIPTS FOR THE...USARIEM TECHNICAL NOTE TN16-1 DEVELOPMENT OF MATLAB ® SCRIPTS FOR THE CALCULATION OF THERMAL MANIKIN REGIONAL RESISTANCE VALUES...EXECUTIVE SUMMARY A software tool has been developed via MATLAB ® scripts to reduce the amount of repetitive and time-consuming calculations that are

  20. GIS-facilitated spatial narratives

    DEFF Research Database (Denmark)

    Møller-Jensen, Lasse; Jeppesen, Henrik; Kofie, Richard Y.

    2008-01-01

    on the thematically and narrative linking of a set of locations within an area. A spatial narrative that describes the - largely unsuccessful - history of Danish plantations on the Gold Coast (1788-1850) is implemented through the Google Earth client. This client is seen both as a type of media in itself for ‘home......-based' exploration of sites related to the narrative and as a tool that facilitates the design of spatial narratives before implementation within portable GIS devices. The Google Earth-based visualization of the spatial narrative is created by a Python script that outputs a web-accessible KML format file. The KML...

  1. From Workshop to Classroom: Bridging GIS Success

    Science.gov (United States)

    Stonier, Francis; Hong, Jung Eun

    2016-01-01

    This article shares the first-time geographic information system (GIS) experiences of two advanced placement human geography classes. The teacher had participated in a summer GIS workshop and then brought those skills into her classroom for the students' benefit. Eighteen students shared their experiences researching their family history, working…

  2. Trends in GIS: an environmental perspective

    International Nuclear Information System (INIS)

    Ringrose, S.

    1992-01-01

    Trends in the Geographic Information System (GIS) have long been difficult to assess comprehensively because of the different perspective of the large number of players in the GIS game. This work represents an overview intended as background to the Workshop Proceedings. As the term GIS means different things to different people the intent is to start with definitions followed by a discussion of data models and inherent functionality of GIS systems. Recent trends are also considered in the context of environmental analyses. Problems arise when considering environmental monitoring due to the paucity of explicit functions dealing with change detection through time. Here parallels are drawn with recent studies which have used the integration of GIS and remotely sensed data. Reasons behind the functional limitations of GIS because apparent as the historical evolution of present day GIS systems is considered, although to some extent these are mitigated by future trends. Finally consideration is given to the role of GIS in assisting with mine site development and especially mine site rehabilitation. 23 refs

  3. Data Driven Program Planning for GIS Instruction

    Science.gov (United States)

    Scarletto, Edith

    2013-01-01

    This study used both focus groups (qualitative) and survey data (quantitative) to develop and expand an instruction program for GIS services. It examined the needs and preferences faculty and graduate students have for learning about GIS applications for teaching and research. While faculty preferred in person workshops and graduate students…

  4. GIS in oceanography: Status, hurdles and prospects

    Digital Repository Service at National Institute of Oceanography (India)

    Kunte, P.D.

    stream_size 5 stream_content_type text/plain stream_name Remote_Sens_GIS_Environ_Plan_1995_575.pdf.txt stream_source_info Remote_Sens_GIS_Environ_Plan_1995_575.pdf.txt Content-Encoding ISO-8859-1 Content-Type text/plain; charset...

  5. GIS and Cartography: An Introduction Overview

    International Nuclear Information System (INIS)

    Dominguez, J.

    2000-01-01

    This Technical Report concerns to some relevant concepts in Cartography and GIS. We will define terms and functions as scale, projection, cartographic syntaxes. We'll specify some Geographic Information, formats, sources... Finally, we will study about GIS applications and, specially, how CIEMAT is working with that, and what is the future of this technology. (Author) 71 refs

  6. GIS risk analysis of hazardous materials transport

    International Nuclear Information System (INIS)

    Anders, C.; Olsten, J.

    1991-01-01

    The Geographic Information System (GIS) was used to assess the risks and vulnerability of transporting hazardous materials and wastes (such as gasoline, explosives, poisons, etc) on the Arizona highway system. This paper discusses the methodology that was utilized, and the application of GIS systems to risk analysis problems

  7. Visualizing Opportunities: GIS Skills for Retail Marketing

    Science.gov (United States)

    Wu, Peter Y.; Rathswohl, Eugene

    2011-01-01

    Business students need to develop skills in the intelligent use of information, especially spatial information, for decision-making. Geographic Information System (GIS) is a viable tool for that purpose. Yet the few GIS courses in the Information Systems curriculum offered in various business schools tend to focus on different concepts and skills.…

  8. Development a GIS Snowstorm Database

    Science.gov (United States)

    Squires, M. F.

    2010-12-01

    This paper describes the development of a GIS Snowstorm Database (GSDB) at NOAA’s National Climatic Data Center. The snowstorm database is a collection of GIS layers and tabular information for 471 snowstorms between 1900 and 2010. Each snowstorm has undergone automated and manual quality control. The beginning and ending date of each snowstorm is specified. The original purpose of this data was to serve as input for NCDC’s new Regional Snowfall Impact Scale (ReSIS). However, this data is being preserved and used to investigate the impacts of snowstorms on society. GSDB is used to summarize the impact of snowstorms on transportation (interstates) and various classes of facilities (roads, schools, hospitals, etc.). GSDB can also be linked to other sources of impacts such as insurance loss information and Storm Data. Thus the snowstorm database is suited for many different types of users including the general public, decision makers, and researchers. This paper summarizes quality control issues associated with using snowfall data, methods used to identify the starting and ending dates of a storm, and examples of the tables that combine snowfall and societal data.

  9. Numerical linear algebra a concise introduction with Matlab and Julia

    CERN Document Server

    Bornemann, Folkmar

    2018-01-01

    This book offers an introduction to the algorithmic-numerical thinking using basic problems of linear algebra. By focusing on linear algebra, it ensures a stronger thematic coherence than is otherwise found in introductory lectures on numerics. The book highlights the usefulness of matrix partitioning compared to a component view, leading not only to a clearer notation and shorter algorithms, but also to significant runtime gains in modern computer architectures. The algorithms and accompanying numerical examples are given in the programming environment MATLAB, and additionally – in an appendix – in the future-oriented, freely accessible programming language Julia. This book is suitable for a two-hour lecture on numerical linear algebra from the second semester of a bachelor's degree in mathematics.

  10. Bifurcation software in Matlab with applications in neuronal modeling.

    Science.gov (United States)

    Govaerts, Willy; Sautois, Bart

    2005-02-01

    Many biological phenomena, notably in neuroscience, can be modeled by dynamical systems. We describe a recent improvement of a Matlab software package for dynamical systems with applications to modeling single neurons and all-to-all connected networks of neurons. The new software features consist of an object-oriented approach to bifurcation computations and the partial inclusion of C-code to speed up the computation. As an application, we study the origin of the spiking behaviour of neurons when the equilibrium state is destabilized by an incoming current. We show that Class II behaviour, i.e. firing with a finite frequency, is possible even if the destabilization occurs through a saddle-node bifurcation. Furthermore, we show that synchronization of an all-to-all connected network of such neurons with only excitatory connections is also possible in this case.

  11. Proper generalized decompositions an introduction to computer implementation with Matlab

    CERN Document Server

    Cueto, Elías; Alfaro, Icíar

    2016-01-01

    This book is intended to help researchers overcome the entrance barrier to Proper Generalized Decomposition (PGD), by providing a valuable tool to begin the programming task. Detailed Matlab Codes are included for every chapter in the book, in which the theory previously described is translated into practice. Examples include parametric problems, non-linear model order reduction and real-time simulation, among others. Proper Generalized Decomposition (PGD) is a method for numerical simulation in many fields of applied science and engineering. As a generalization of Proper Orthogonal Decomposition or Principal Component Analysis to an arbitrary number of dimensions, PGD is able to provide the analyst with very accurate solutions for problems defined in high dimensional spaces, parametric problems and even real-time simulation. .

  12. Numerical simulation of dimples in airfoil using MATLAB

    Science.gov (United States)

    Booma Devi, P.; Shah, Dilip A.

    2017-05-01

    The Aircraft wing is a point of important research which poses greater challenge in terms of aerodynamic efficiency. The flow separation control method is addressed in classical aerodynamics methods. This study focuses on influence of dimples on controlling the flow and also increasing the aerodynamic efficiency. The periodic process of placing the cavities on the wing starting from root to tip controls the flow separation. The linear variation of characteristic curve provides the information about the flow separation and control of flow on upper surface of the airfoil.These different shapes are utilized viz., Square, Rectangle and Triangle. The numerical simulation is carried out in using MATLAB package. Preliminary analysis on the flow separation is carried out focuses on laminar flow separation, which has the influence on the overall lift generation and drag generation.

  13. MATLAB Simulation of RFID Communication Protocol for Sensor Data Acquisition

    Directory of Open Access Journals (Sweden)

    Soumen GHOSH

    2015-05-01

    Full Text Available Data acquisition processes the sampling and conditioning the signals that measure real world physical conditions such as temperature, pressure, flow etc. and convert the signal into in appropriate format for displaying and transmission to remote end. Now a days RFID i.e. Radio Frequency Identification plays a vital role in Data acquisition system. The present article proposes a smart DAS scheme containing RFID reader and Active tag. The data acquisition system is interfaced with tag through I2C bus. The reader communicates with tag following RFID communication protocol requesting to send the logged data which are refreshed and stored into tag memory periodically. The communication is simulated using MATLAB software successfully.

  14. Introduction to Artificial Vision through Laboratory Guides Using Matlab

    Directory of Open Access Journals (Sweden)

    Verónica Londoño-Osorio

    2013-11-01

    Full Text Available This paper presents the design of two laboratory guides in artificial vision for a course which aims to introduce students to the different areas of specialization of his career. Therefore, the designed practices motivate and provide relevant content to the student, and to encourage research in the area of image processing. The first guide presents an introductory practice that explores the basic commands for image processing by programming a GUI in Matlab, and a second practice in which you use an image recognition algorithm, which compares the color characteristics of facial or objects images. The discussion of the results, challenges and recommendations for the development of each practice session are explained. The survey answers of the students are displayed. This survey allows checking their level of acceptance for the design and content of practice and motivation to continue studying in the image processing area. Finally, comparisons with laboratory guides that were designed in other universities are made.

  15. PSYCHOACOUSTICS: a comprehensive MATLAB toolbox for auditory testing.

    Science.gov (United States)

    Soranzo, Alessandro; Grassi, Massimo

    2014-01-01

    PSYCHOACOUSTICS is a new MATLAB toolbox which implements three classic adaptive procedures for auditory threshold estimation. The first includes those of the Staircase family (method of limits, simple up-down and transformed up-down); the second is the Parameter Estimation by Sequential Testing (PEST); and the third is the Maximum Likelihood Procedure (MLP). The toolbox comes with more than twenty built-in experiments each provided with the recommended (default) parameters. However, if desired, these parameters can be modified through an intuitive and user friendly graphical interface and stored for future use (no programming skills are required). Finally, PSYCHOACOUSTICS is very flexible as it comes with several signal generators and can be easily extended for any experiment.

  16. Matlab Stability and Control Toolbox: Trim and Static Stability Module

    Science.gov (United States)

    Crespo, Luis G.; Kenny, Sean P.

    2006-01-01

    This paper presents the technical background of the Trim and Static module of the Matlab Stability and Control Toolbox. This module performs a low-fidelity stability and control assessment of an aircraft model for a set of flight critical conditions. This is attained by determining if the control authority available for trim is sufficient and if the static stability characteristics are adequate. These conditions can be selected from a prescribed set or can be specified to meet particular requirements. The prescribed set of conditions includes horizontal flight, take-off rotation, landing flare, steady roll, steady turn and pull-up/ push-over flight, for which several operating conditions can be specified. A mathematical model was developed allowing for six-dimensional trim, adjustable inertial properties, asymmetric vehicle layouts, arbitrary number of engines, multi-axial thrust vectoring, engine(s)-out conditions, crosswind and gyroscopic effects.

  17. Some selected quantitative methods of thermal image analysis in Matlab.

    Science.gov (United States)

    Koprowski, Robert

    2016-05-01

    The paper presents a new algorithm based on some selected automatic quantitative methods for analysing thermal images. It shows the practical implementation of these image analysis methods in Matlab. It enables to perform fully automated and reproducible measurements of selected parameters in thermal images. The paper also shows two examples of the use of the proposed image analysis methods for the area of ​​the skin of a human foot and face. The full source code of the developed application is also provided as an attachment. The main window of the program during dynamic analysis of the foot thermal image. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. A GUI tool for beta function measurement using MATLAB

    International Nuclear Information System (INIS)

    Chen Guangling; Tian Shunqiang; Liu Guimin; Jiang Bocheng

    2009-01-01

    The beta function measurement is used to detect the shift in the betatron tune as the strength of an individual quadrupole magnet is varied. A GUI (graphic user interface) tool for the beta function measurement is developed using the MATLAB program language in the Linux environment, which facilitates the commissioning of the Shanghai Synchrotron Radiation Facility (SSRF) storage ring. In this paper, we describe the design of the application and give some measuring results and discussions about the definition of the measurement. The program has been optimized to solve some restrictions of the AT tracking code. After the correction with LOCO (linear optics from closed orbits), the horizontal and the vertical root mean square values (rms values) can be reduced to 0.12 and 0.10. (authors)

  19. GIS/FIS development for the SSC

    International Nuclear Information System (INIS)

    Oslin, A.; Butalla, M.

    1992-01-01

    Facility management for a project of the size and complexity of the SSCL is a challenging task. The Facility Information System/Geographic Information System (FIS/GIS) should provide an effective tool for the demanding work ahead. Both the FIS and GIS encompass information that many potential users across multiple disciplines will require for effective facility management. FIS will be integrated with the GIS for applications that involve duplicate needs of graphic and attribute data. In particular, infrastructure networks, environmental monitoring, emergency dispatching, and hazardous materials management have been identified as areas where the two systems will interface. In general, the GIS will manage graphic and attribute information outside the actual structure of the SSCL. The FIS will take over operation of components and networks within the SSCL facility. By providing a method for informed decision-making, implementation of the SSC FIS/GIS will facilitate the tasks involved in managing our Laboratory during all phases of its life

  20. A MATLAB-Aided Method for Teaching Calculus-Based Business Mathematics

    Science.gov (United States)

    Liang, Jiajuan; Pan, William S. Y.

    2009-01-01

    MATLAB is a powerful package for numerical computation. MATLAB contains a rich pool of mathematical functions and provides flexible plotting functions for illustrating mathematical solutions. The course of calculus-based business mathematics consists of two major topics: 1) derivative and its applications in business; and 2) integration and its…

  1. Matlab for electrical and computer engineering students and professionals with Simulink

    CERN Document Server

    Priemer, Roland

    2013-01-01

    This book combines the teaching of the MATLAB#65533; programming language with the presentation and development of carefully selected electrical and computer engineering (ECE) fundamentals. This is what distinguishes it from other books concerned with MATLAB#65533;: it is directed specifically to ECE concerns.

  2. Scilab and MATLAB Interfaces to MUMPS (version 4.6 or greater)

    OpenAIRE

    Fèvre , Aurélia; Pralet , Stéphane; L'Excellent , Jean-Yves

    2006-01-01

    This document describes the Scilab and MATLAB interfaces to MUMPS version 4.6. We describe the differences and similarities between usual Fortran/C MUMPS interfaces and its Scilab/MATLAB interfaces, the calling sequences and functionalities. Examples of use and experimental results are also provided.

  3. A Matlab/Simulink-Based Interactive Module for Servo Systems Learning

    Science.gov (United States)

    Aliane, N.

    2010-01-01

    This paper presents an interactive module for learning both the fundamental and practical issues of servo systems. This module, developed using Simulink in conjunction with the Matlab graphical user interface (Matlab-GUI) tool, is used to supplement conventional lectures in control engineering and robotics subjects. First, the paper introduces the…

  4. Based on matlab 3d visualization programming in the application of the uranium exploration

    International Nuclear Information System (INIS)

    Qi Jianquan

    2012-01-01

    Combined geological theory, geophysical curve and Matlab programming three dimensional visualization applied to the production of uranium exploration. With a simple Matlab programming, numerical processing and graphical visualization of convenient features, and effective in identifying ore bodies, recourse to ore, ore body delineation of the scope of analysis has played the role of sedimentary environment. (author)

  5. Regularization Tools Version 3.0 for Matlab 5.2

    DEFF Research Database (Denmark)

    Hansen, Per Christian

    1999-01-01

    This communication describes Version 3.0 of Regularization Tools, a Matlab package for analysis and solution of discrete ill-posed problems.......This communication describes Version 3.0 of Regularization Tools, a Matlab package for analysis and solution of discrete ill-posed problems....

  6. OXlearn: a new MATLAB-based simulation tool for connectionist models.

    Science.gov (United States)

    Ruh, Nicolas; Westermann, Gert

    2009-11-01

    OXlearn is a free, platform-independent MATLAB toolbox in which standard connectionist neural network models can be set up, run, and analyzed by means of a user-friendly graphical interface. Due to its seamless integration with the MATLAB programming environment, the inner workings of the simulation tool can be easily inspected and/or extended using native MATLAB commands or components. This combination of usability, transparency, and extendability makes OXlearn an efficient tool for the implementation of basic research projects or the prototyping of more complex research endeavors, as well as for teaching. Both the MATLAB toolbox and a compiled version that does not require access to MATLAB can be downloaded from http://psych.brookes.ac.uk/oxlearn/.

  7. MatLab Programming for Engineers Having No Formal Programming Knowledge

    Science.gov (United States)

    Shaykhian, Linda H.; Shaykhian, Gholam Ali

    2007-01-01

    MatLab is one of the most widely used very high level programming languages for Scientific and engineering computations. It is very user-friendly and needs practically no formal programming knowledge. Presented here are MatLab programming aspects and not just the MatLab commands for scientists and engineers who do not have formal programming training and also have no significant time to spare for learning programming to solve their real world problems. Specifically provided are programs for visualization. Also, stated are the current limitations of the MatLab, which possibly can be taken care of by Mathworks Inc. in a future version to make MatLab more versatile.

  8. Microcontroller USB interfacing with MATLAB GUI for low cost medical ultrasound scanners

    Directory of Open Access Journals (Sweden)

    Jean Rossario Raj

    2016-06-01

    Full Text Available This paper presents an 8051 microcontroller-based control of ultrasound scanner prototype hardware from a host laptop MATLAB GUI. The hardware control of many instruments is carried out by microcontrollers. These microcontrollers are in turn controlled from a GUI residing in a computing machine that is connected over the USB interface. Conventionally such GUIs are developed using ‘C’ language or its variants. But MATLAB GUI is a better tool, when such GUI programs need to do huge image/video processing. However interfacing MATLAB with the microcontroller is a challenging task. Here, MATLAB interfacing through an intermediate MEX ‘C’ language program is presented. This paper outlines the MEX programming methods for achieving the smooth interfacing of microcontrollers with MATLAB GUI.

  9. Application of GIS in Beach Placer Exploration

    International Nuclear Information System (INIS)

    Babu, M.N.

    2016-01-01

    Application of Geographic Information System (GIS) in beach placer exploration combines the activities of data collection, organisation, visualisation, query, analysis and prediction. GIS has the potential to enhance the capability for creative data analysis, modelling and interpretation. Exploration software and GIS are essential tools for geoscientists searching for mineral deposits. GIS technology has come a long way in the past fifteen years, especially in data handling, analysis, visualization etc. Modern technology and solutions are now evolving to allow geoscientists to share data easily between mapping platforms and enterprise level GIS environments. In beach placer exploration programme, data handling and processing are the main challenging tasks due to generation and processing of large volume of field and laboratory data of the areas under investigation. Though there are limitations in visualising map data as a single map on a screen, due to its non-proportionate lengths and widths, a GIS can very well handle all these varied datasets to demarcate highly potential zones within a narrow coastal strip. Generally these datasets contain information from thousands of drillholes about their location co-ordinates, depth, height, description and thickness of lithounits, water table level, radioactivity and other pertinent subsurface properties. Field data collection can be efficiently done using a hand held global positioning system (GPS) installed with mobile-GIS application and data handling software

  10. Using Web-Based GIS in Introductory Human Geography

    Science.gov (United States)

    Songer, Lynn C.

    2010-01-01

    Advocates for using a geographic information system (GIS) in education assert that GIS improves student learning. However, studies to clarify the relationship between learning and using GIS are still needed. This study examines the effects of using Web-based GIS maps in place of paper maps on students' geography content knowledge and motivation…

  11. On Using GIS to Teach in the Social Sciences

    Science.gov (United States)

    Harris, Jill S.

    2012-01-01

    In this article, the author discusses how a professor can harness the power of Geographic Information Systems (GIS) and use GIS to teach in the social sciences. She shows examples of how GIS can illustrate concepts during lecture or discussion, and provides two specific GIS assignments: one for undergraduate students and the other for graduate…

  12. The Global Landscape of GIS in Secondary Education

    Science.gov (United States)

    Kerski, Joseph J.; Demirci, Ali; Milson, Andrew J.

    2013-01-01

    This study analyzes the status of GIS in schools in thirty-three countries and proposes recommendations for advancing the implementation and effectiveness of GIS in secondary education from an international perspective. Thirty-three countries have been evaluated in the study to assess the global landscape of educational GIS by analyzing how GIS is…

  13. IMPLEMENTATION OF GIS-BASED MULTICRITERIA DECISION ANALYSIS WITH VB IN ArcGIS

    OpenAIRE

    DERYA OZTURK; FATMAGUL BATUK

    2011-01-01

    This article focuses on the integration of multicriteria decision analysis (MCDA) and geographical information systems (GIS) and introduces a tool, GIS–MCDA, written in visual basic in ArcGIS for GIS-based MCDA. The GIS–MCDA deals with raster-based data sets and includes standardization, weighting and decision analysis methods, and sensitivity analysis. Simple additive weighting, weighted product method, technique for order preference by similarity to ideal solution, compromise programming, a...

  14. MATLAB simulation software used for the PhD thesis "Acquisition of Multi-Band Signals via Compressed Sensing

    DEFF Research Database (Denmark)

    2014-01-01

    MATLAB simulation software used for the PhD thesis "Acquisition of Multi-Band Signals via Compressed Sensing......MATLAB simulation software used for the PhD thesis "Acquisition of Multi-Band Signals via Compressed Sensing...

  15. Optoelectronic polarimeter controlled by a graphical user interface of Matlab

    International Nuclear Information System (INIS)

    Vilardy, J M; Torres, R; Jimenez, C J

    2017-01-01

    We show the design and implementation of an optical polarimeter using electronic control. The polarimeter has a software with a graphical user interface (GUI) that controls the optoelectronic setup and captures the optical intensity measurement, and finally, this software evaluates the Stokes vector of a state of polarization (SOP) by means of the synchronous detection of optical waves. The proposed optoelectronic polarimeter can determine the Stokes vector of a SOP in a rapid and efficient way. Using the polarimeter proposed in this paper, the students will be able to observe (in an optical bench) and understand the different interactions of the SOP when the optical waves pass through to the linear polarizers and retarder waves plates. The polarimeter prototype could be used as a main tool for the students in order to learn the theory and experimental aspects of the SOP for optical waves via the Stokes vector measurement. The proposed polarimeter controlled by a GUI of Matlab is more attractive and suitable to teach and to learn the polarization of optical waves. (paper)

  16. Development of a fault test experimental facility model using Matlab

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Iraci Martinez; Moraes, Davi Almeida, E-mail: martinez@ipen.br, E-mail: dmoraes@dk8.com.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    The Fault Test Experimental Facility was developed to simulate a PWR nuclear power plant and is instrumented with temperature, level and pressure sensors. The Fault Test Experimental Facility can be operated to generate normal and fault data, and these failures can be added initially small, and their magnitude being increasing gradually. This work presents the Fault Test Experimental Facility model developed using the Matlab GUIDE (Graphical User Interface Development Environment) toolbox that consists of a set of functions designed to create interfaces in an easy and fast way. The system model is based on the mass and energy inventory balance equations. Physical as well as operational aspects are taken into consideration. The interface layout looks like a process flowchart and the user can set the input variables. Besides the normal operation conditions, there is the possibility to choose a faulty variable from a list. The program also allows the user to set the noise level for the input variables. Using the model, data were generated for different operational conditions, both under normal and fault conditions with different noise levels added to the input variables. Data generated by the model will be compared with Fault Test Experimental Facility data. The Fault Test Experimental Facility theoretical model results will be used for the development of a Monitoring and Fault Detection System. (author)

  17. MATLAB Simulation of Photovoltaic and Photovoltaic/Thermal Systems Performance

    Science.gov (United States)

    Nasir, Farah H. M.; Husaini, Yusnira

    2018-03-01

    The efficiency of the photovoltaic reduces when the photovoltaic cell temperature increased due to solar irradiance. One solution is come up with the cooling system photovoltaic system. This combination is forming the photovoltaic-thermal (PV/T) system. Not only will it generate electricity also heat at the same time. The aim of this research is to focus on the modeling and simulation of photovoltaic (PV) and photovoltaic-thermal (PV/T) electrical performance by using single-diode equivalent circuit model. Both PV and PV/T models are developed in Matlab/Simulink. By providing the cooling system in PV/T, the efficiency of the system can be increased by decreasing the PV cell temperature. The maximum thermal, electrical and total efficiency values of PV/T in the present research are 35.18%, 15.56% and 50.74% at solar irradiance of 400 W/m2, mass flow rate of 0.05kgs-1 and inlet temperature of 25 °C respectively has been obtained. The photovoltaic-thermal shows that the higher efficiency performance compared to the photovoltaic system.

  18. Designing an ultrafast laser virtual laboratory using MATLAB GUIDE

    International Nuclear Information System (INIS)

    Cambronero-López, F; Gómez-Varela, A I; Bao-Varela, C

    2017-01-01

    In this work we present a virtual simulator developed using the MATLAB GUIDE environment based on the numerical resolution of the nonlinear Schrödinger equation (NLS) and using the split step method for the study of the spatial–temporal propagation of nonlinear ultrashort laser pulses. This allows us to study the spatial–temporal propagation of ultrafast pulses as well as the influence of high-order spectral phases such as group delay dispersion and third-order dispersion on pulse compression in time. The NLS can describe several nonlinear effects, in particular in this paper we consider the Kerr effect, cross-polarized wave generation and cubic–quintic propagation in order to highlight the potential of this equation combined with the GUIDE environment. Graphical user interfaces are commonly used in science and engineering teaching due to their educational value, and have proven to be an effective way to engage and motivate students. Specifically, the interactive graphical interfaces presented provide the visualization of some of the most important nonlinear optics phenomena and allows users to vary the values of the main parameters involved. (paper)

  19. Development Of Translational Motion Of Unmanned Aerial Vehicle Using MATLAB

    Directory of Open Access Journals (Sweden)

    Thwe Thwe Htoo

    2015-08-01

    Full Text Available This research work describes the translational motion analysis of unmanned aerial vehicle UAV. Since the center of mass of the receiver is timevarying the equations are written in a reference frame that is geometrically fixed in the aircraft. Due to the fact that aerial vehicle simulation and control deal with the position and orientation of the UAV the equations of motion are derived in terms of the translational and rotational position and velocity with respect to the aircraft location. The formation relative motion control is a challenging problem due to the coupled translational and rotational dynamics. As the translational vector depends on the current attitude and its angular velocity and some of the attitude constraints also couple the position and attitude of the spacecraft it makes the formation control problem high dimensional. This work develops UAV stability conditions including translational vector maneuverability condition and included angle condition between the translational and the rotational motion of UAV system and then presents two methods to calculate the UAV attitude. Both of the two methods need first design the optimal trajectory of the translational vector and then use geometric and nonlinear programming methods to calculate the target trajectory. The validity of the proposed approach is demonstrated in a UAV by using MATLAB. The performance of the translational motion control is evaluated by the simulated results.

  20. Wind power limit calculation basedon frequency deviation using Matlab

    International Nuclear Information System (INIS)

    Santos Fuentefria, Ariel; Salgado Duarte, Yorlandis; MejutoFarray, Davis

    2017-01-01

    The utilization of the wind energy for the production of electricity it’s a technology that has promoted itself in the last years, like an alternative before the environmental deterioration and the scarcity of the fossil fuels. When the power generation of wind energy is integrated into the electrical power systems, maybe take place problems in the frequency stability due to, mainly, the stochastic characteristic of the wind and the impossibility of the wind power control on behalf of the dispatchers. In this work, is make an analysis of frequency deviation when the wind power generation rise in an isolated electrical power system. This analysis develops in a computerized frame with the construction of an algorithm using Matlab, which allowed to make several simulations in order to obtain the frequency behavior for different loads and wind power conditions. Besides, it was determined the wind power limit for minimum, medium and maximum load. The results show that the greatest values on wind power are obtained in maximum load condition. However, the minimum load condition limit the introduction of wind power into the system. (author)

  1. MPBEC, a Matlab Program for Biomolecular Electrostatic Calculations.

    Science.gov (United States)

    Vergara-Perez, Sandra; Marucho, Marcelo

    2016-01-01

    One of the most used and efficient approaches to compute electrostatic properties of biological systems is to numerically solve the Poisson-Boltzmann (PB) equation. There are several software packages available that solve the PB equation for molecules in aqueous electrolyte solutions. Most of these software packages are useful for scientists with specialized training and expertise in computational biophysics. However, the user is usually required to manually take several important choices, depending on the complexity of the biological system, to successfully obtain the numerical solution of the PB equation. This may become an obstacle for researchers, experimentalists, even students with no special training in computational methodologies. Aiming to overcome this limitation, in this article we present MPBEC, a free, cross-platform, open-source software that provides non-experts in the field an easy and efficient way to perform biomolecular electrostatic calculations on single processor computers. MPBEC is a Matlab script based on the Adaptative Poisson Boltzmann Solver, one of the most popular approaches used to solve the PB equation. MPBEC does not require any user programming, text editing or extensive statistical skills, and comes with detailed user-guide documentation. As a unique feature, MPBEC includes a useful graphical user interface (GUI) application which helps and guides users to configure and setup the optimal parameters and approximations to successfully perform the required biomolecular electrostatic calculations. The GUI also incorporates visualization tools to facilitate users pre- and post- analysis of structural and electrical properties of biomolecules.

  2. A Series of Computational Neuroscience Labs Increases Comfort with MATLAB.

    Science.gov (United States)

    Nichols, David F

    2015-01-01

    Computational simulations allow for a low-cost, reliable means to demonstrate complex and often times inaccessible concepts to undergraduates. However, students without prior computer programming training may find working with code-based simulations to be intimidating and distracting. A series of computational neuroscience labs involving the Hodgkin-Huxley equations, an Integrate-and-Fire model, and a Hopfield Memory network were used in an undergraduate neuroscience laboratory component of an introductory level course. Using short focused surveys before and after each lab, student comfort levels were shown to increase drastically from a majority of students being uncomfortable or with neutral feelings about working in the MATLAB environment to a vast majority of students being comfortable working in the environment. Though change was reported within each lab, a series of labs was necessary in order to establish a lasting high level of comfort. Comfort working with code is important as a first step in acquiring computational skills that are required to address many questions within neuroscience.

  3. MATLAB Stability and Control Toolbox Trim and Static Stability Module

    Science.gov (United States)

    Kenny, Sean P.; Crespo, Luis

    2012-01-01

    MATLAB Stability and Control Toolbox (MASCOT) utilizes geometric, aerodynamic, and inertial inputs to calculate air vehicle stability in a variety of critical flight conditions. The code is based on fundamental, non-linear equations of motion and is able to translate results into a qualitative, graphical scale useful to the non-expert. MASCOT was created to provide the conceptual aircraft designer accurate predictions of air vehicle stability and control characteristics. The code takes as input mass property data in the form of an inertia tensor, aerodynamic loading data, and propulsion (i.e. thrust) loading data. Using fundamental nonlinear equations of motion, MASCOT then calculates vehicle trim and static stability data for the desired flight condition(s). Available flight conditions include six horizontal and six landing rotation conditions with varying options for engine out, crosswind, and sideslip, plus three take-off rotation conditions. Results are displayed through a unique graphical interface developed to provide the non-stability and control expert conceptual design engineer a qualitative scale indicating whether the vehicle has acceptable, marginal, or unacceptable static stability characteristics. If desired, the user can also examine the detailed, quantitative results.

  4. Designing an ultrafast laser virtual laboratory using MATLAB GUIDE

    Science.gov (United States)

    Cambronero-López, F.; Gómez-Varela, A. I.; Bao-Varela, C.

    2017-05-01

    In this work we present a virtual simulator developed using the MATLAB GUIDE environment based on the numerical resolution of the nonlinear Schrödinger equation (NLS) and using the split step method for the study of the spatial-temporal propagation of nonlinear ultrashort laser pulses. This allows us to study the spatial-temporal propagation of ultrafast pulses as well as the influence of high-order spectral phases such as group delay dispersion and third-order dispersion on pulse compression in time. The NLS can describe several nonlinear effects, in particular in this paper we consider the Kerr effect, cross-polarized wave generation and cubic-quintic propagation in order to highlight the potential of this equation combined with the GUIDE environment. Graphical user interfaces are commonly used in science and engineering teaching due to their educational value, and have proven to be an effective way to engage and motivate students. Specifically, the interactive graphical interfaces presented provide the visualization of some of the most important nonlinear optics phenomena and allows users to vary the values of the main parameters involved.

  5. Efficient MATLAB computations with sparse and factored tensors.

    Energy Technology Data Exchange (ETDEWEB)

    Bader, Brett William; Kolda, Tamara Gibson (Sandia National Lab, Livermore, CA)

    2006-12-01

    In this paper, the term tensor refers simply to a multidimensional or N-way array, and we consider how specially structured tensors allow for efficient storage and computation. First, we study sparse tensors, which have the property that the vast majority of the elements are zero. We propose storing sparse tensors using coordinate format and describe the computational efficiency of this scheme for various mathematical operations, including those typical to tensor decomposition algorithms. Second, we study factored tensors, which have the property that they can be assembled from more basic components. We consider two specific types: a Tucker tensor can be expressed as the product of a core tensor (which itself may be dense, sparse, or factored) and a matrix along each mode, and a Kruskal tensor can be expressed as the sum of rank-1 tensors. We are interested in the case where the storage of the components is less than the storage of the full tensor, and we demonstrate that many elementary operations can be computed using only the components. All of the efficiencies described in this paper are implemented in the Tensor Toolbox for MATLAB.

  6. Calculus Problem Solution And Simulation Using GUI Of Matlab

    Directory of Open Access Journals (Sweden)

    Syaharuddin

    2017-09-01

    Full Text Available This research aims to develop the project application in teaching and learning Calculus using Grapichal User Interface GUI of Matlab. The scope of the development result includes 1 PreCalculus 2 Function Limit 3 Derivative and its application and 4 Integral and its application. Every aspect of development is presented according to the standards of material competence learning achievement indicators and solutions or settlement steps on each issue presented. This project application can be used by lecturers and students in universities to improve motivation mastery of material and student learning outcomes in the Calculus course. Development of this project application is done through 4 stages called 4-D namely Define Design Development and Dissemination. Based on the data analysis the results obtained at the validation stage of expert validity level average of 3.575 which means quite valid. Then on a limited trial the average student gave a response of 92.00 which means very good. While in the first field trial the average student gave a response of 89.30 which means very good and in the second field trial the average student gave a responded of 90.15 which means very good. Besides that we also solve computational calculus problems in Edwin J. Purcell Dale Varbergs Book of Volume 1 of Edition 5 of 48 questions that are divided into 64 cases.

  7. MPBEC, a Matlab Program for Biomolecular Electrostatic Calculations

    Science.gov (United States)

    Vergara-Perez, Sandra; Marucho, Marcelo

    2016-01-01

    One of the most used and efficient approaches to compute electrostatic properties of biological systems is to numerically solve the Poisson-Boltzmann (PB) equation. There are several software packages available that solve the PB equation for molecules in aqueous electrolyte solutions. Most of these software packages are useful for scientists with specialized training and expertise in computational biophysics. However, the user is usually required to manually take several important choices, depending on the complexity of the biological system, to successfully obtain the numerical solution of the PB equation. This may become an obstacle for researchers, experimentalists, even students with no special training in computational methodologies. Aiming to overcome this limitation, in this article we present MPBEC, a free, cross-platform, open-source software that provides non-experts in the field an easy and efficient way to perform biomolecular electrostatic calculations on single processor computers. MPBEC is a Matlab script based on the Adaptative Poisson-Boltzmann Solver, one of the most popular approaches used to solve the PB equation. MPBEC does not require any user programming, text editing or extensive statistical skills, and comes with detailed user-guide documentation. As a unique feature, MPBEC includes a useful graphical user interface (GUI) application which helps and guides users to configure and setup the optimal parameters and approximations to successfully perform the required biomolecular electrostatic calculations. The GUI also incorporates visualization tools to facilitate users pre- and post-analysis of structural and electrical properties of biomolecules.

  8. Development of a fault test experimental facility model using Matlab

    International Nuclear Information System (INIS)

    Pereira, Iraci Martinez; Moraes, Davi Almeida

    2015-01-01

    The Fault Test Experimental Facility was developed to simulate a PWR nuclear power plant and is instrumented with temperature, level and pressure sensors. The Fault Test Experimental Facility can be operated to generate normal and fault data, and these failures can be added initially small, and their magnitude being increasing gradually. This work presents the Fault Test Experimental Facility model developed using the Matlab GUIDE (Graphical User Interface Development Environment) toolbox that consists of a set of functions designed to create interfaces in an easy and fast way. The system model is based on the mass and energy inventory balance equations. Physical as well as operational aspects are taken into consideration. The interface layout looks like a process flowchart and the user can set the input variables. Besides the normal operation conditions, there is the possibility to choose a faulty variable from a list. The program also allows the user to set the noise level for the input variables. Using the model, data were generated for different operational conditions, both under normal and fault conditions with different noise levels added to the input variables. Data generated by the model will be compared with Fault Test Experimental Facility data. The Fault Test Experimental Facility theoretical model results will be used for the development of a Monitoring and Fault Detection System. (author)

  9. GIS, Pollution Prevention and Public Health

    Science.gov (United States)

    Using examples of preventing pollution and reducing risk of exposure to communities, this guide answers basic interest and start-up questions, addresses benefits and limitations and illustrates the value of GIS for local health departments.

  10. Cloud Computing and Its Applications in GIS

    Science.gov (United States)

    Kang, Cao

    2011-12-01

    Cloud computing is a novel computing paradigm that offers highly scalable and highly available distributed computing services. The objectives of this research are to: 1. analyze and understand cloud computing and its potential for GIS; 2. discover the feasibilities of migrating truly spatial GIS algorithms to distributed computing infrastructures; 3. explore a solution to host and serve large volumes of raster GIS data efficiently and speedily. These objectives thus form the basis for three professional articles. The first article is entitled "Cloud Computing and Its Applications in GIS". This paper introduces the concept, structure, and features of cloud computing. Features of cloud computing such as scalability, parallelization, and high availability make it a very capable computing paradigm. Unlike High Performance Computing (HPC), cloud computing uses inexpensive commodity computers. The uniform administration systems in cloud computing make it easier to use than GRID computing. Potential advantages of cloud-based GIS systems such as lower barrier to entry are consequently presented. Three cloud-based GIS system architectures are proposed: public cloud- based GIS systems, private cloud-based GIS systems and hybrid cloud-based GIS systems. Public cloud-based GIS systems provide the lowest entry barriers for users among these three architectures, but their advantages are offset by data security and privacy related issues. Private cloud-based GIS systems provide the best data protection, though they have the highest entry barriers. Hybrid cloud-based GIS systems provide a compromise between these extremes. The second article is entitled "A cloud computing algorithm for the calculation of Euclidian distance for raster GIS". Euclidean distance is a truly spatial GIS algorithm. Classical algorithms such as the pushbroom and growth ring techniques require computational propagation through the entire raster image, which makes it incompatible with the distributed nature

  11. GIS Technology: Resource and Habitability Assessment Tool

    Data.gov (United States)

    National Aeronautics and Space Administration — We are applying Geographic Information Systems (GIS) to new orbital data sets for lunar resource assessment and the identification of past habitable environments on...

  12. Il GIS sulle note di violino

    Directory of Open Access Journals (Sweden)

    Redazione Redazione

    2005-02-01

    Full Text Available La conferenza della comunità GIS italiana senza ombra di dubbio può essere assimilata alla annuale conferenza degli Utenti ESRI, che per presenza e temi non ha eguali ne come appuntamento nè come presenze. Non ce ne vogliano gli altri players delle tecnologie GIS, nè tanto meno gli organizzatori di altre conferenze nazionali quale ASITA

  13. Freeware for GIS and Remote Sensing

    Directory of Open Access Journals (Sweden)

    Lena Halounová

    2007-12-01

    Full Text Available Education in remote sensing and GIS is based on software utilization. The software needs to be installed in computer rooms with a certain number of licenses. The commercial software equipment is therefore financially demanding and not only for universities, but especially for students. Internet research brings a long list of free software of various capabilities. The paper shows a present state of GIS, image processing and remote sensing free software.

  14. Freeware for GIS and Remote Sensing

    OpenAIRE

    Lena Halounová

    2007-01-01

    Education in remote sensing and GIS is based on software utilization. The software needs to be installed in computer rooms with a certain number of licenses. The commercial software equipment is therefore financially demanding and not only for universities, but especially for students. Internet research brings a long list of free software of various capabilities. The paper shows a present state of GIS, image processing and remote sensing free software.

  15. Managing Data and ArcGIS

    OpenAIRE

    Farr, Lucy

    2011-01-01

    Glenn Jobson (CRASSH) produced and edited this video in collaboration with the Incremental project. ESRI's ArcGIS data, and other vector data system, are highly vulnerable to partial or complete data loss over time because as the company makes frequent software updates, and the data themselves have so many moving parts. In this presentation, Lucy Farr (McDonald Institute for Archaeological Research) describes her experiences using ArcGIS, lessons learnt, and recommendations for best practi...

  16. Matlab Geochemistry: An open source geochemistry solver based on MRST

    Science.gov (United States)

    McNeece, C. J.; Raynaud, X.; Nilsen, H.; Hesse, M. A.

    2017-12-01

    The study of geological systems often requires the solution of complex geochemical relations. To address this need we present an open source geochemical solver based on the Matlab Reservoir Simulation Toolbox (MRST) developed by SINTEF. The implementation supports non-isothermal multicomponent aqueous complexation, surface complexation, ion exchange, and dissolution/precipitation reactions. The suite of tools available in MRST allows for rapid model development, in particular the incorporation of geochemical calculations into transport simulations of multiple phases, complex domain geometry and geomechanics. Different numerical schemes and additional physics can be easily incorporated into the existing tools through the object-oriented framework employed by MRST. The solver leverages the automatic differentiation tools available in MRST to solve arbitrarily complex geochemical systems with any choice of species or element concentration as input. Four mathematical approaches enable the solver to be quite robust: 1) the choice of chemical elements as the basis components makes all entries in the composition matrix positive thus preserving convexity, 2) a log variable transformation is used which transfers the nonlinearity to the convex composition matrix, 3) a priori bounds on variables are calculated from the structure of the problem, constraining Netwon's path and 4) an initial guess is calculated implicitly by sequentially adding model complexity. As a benchmark we compare the model to experimental and semi-analytic solutions of the coupled salinity-acidity transport system. Together with the reservoir simulation capabilities of MRST the solver offers a promising tool for geochemical simulations in reservoir domains for applications in a diversity of fields from enhanced oil recovery to radionuclide storage.

  17. GISMO: A MATLAB toolbox for seismic research, monitoring, & education

    Science.gov (United States)

    Thompson, G.; Reyes, C. G.; Kempler, L. A.

    2017-12-01

    GISMO is an open-source MATLAB toolbox which provides an object-oriented framework to build workflows and applications that read, process, visualize and write seismic waveform, catalog and instrument response data. GISMO can retrieve data from a variety of sources (e.g. FDSN web services, Earthworm/Winston servers) and data formats (SAC, Seisan, etc.). It can handle waveform data that crosses file boundaries. All this alleviates one of the most time consuming part for scientists developing their own codes. GISMO simplifies seismic data analysis by providing a common interface for your data, regardless of its source. Several common plots are built-in to GISMO, such as record section plots, spectrograms, depth-time sections, event count per unit time, energy release per unit time, etc. Other visualizations include map views and cross-sections of hypocentral data. Several common processing methods are also included, such as an extensive set of tools for correlation analysis. Support is being added to interface GISMO with ObsPy. GISMO encourages community development of an integrated set of codes and accompanying documentation, eliminating the need for seismologists to "reinvent the wheel". By sharing code the consistency and repeatability of results can be enhanced. GISMO is hosted on GitHub with documentation both within the source code and in the project wiki. GISMO has been used at the University of South Florida and University of Alaska Fairbanks in graduate-level courses including Seismic Data Analysis, Time Series Analysis and Computational Seismology. GISMO has also been tailored to interface with the common seismic monitoring software and data formats used by volcano observatories in the US and elsewhere. As an example, toolbox training was delivered to researchers at INETER (Nicaragua). Applications built on GISMO include IceWeb (e.g. web-based spectrograms), which has been used by Alaska Volcano Observatory since 1998 and became the prototype for the USGS

  18. Cluster implementation for parallel computation within MATLAB software environment

    International Nuclear Information System (INIS)

    Santana, Antonio O. de; Dantas, Carlos C.; Charamba, Luiz G. da R.; Souza Neto, Wilson F. de; Melo, Silvio B. Melo; Lima, Emerson A. de O.

    2013-01-01

    A cluster for parallel computation with MATLAB software the COCGT - Cluster for Optimizing Computing in Gamma ray Transmission methods, is implemented. The implementation correspond to creation of a local net of computers, facilities and configurations of software, as well as the accomplishment of cluster tests for determine and optimizing of performance in the data processing. The COCGT implementation was required by data computation from gamma transmission measurements applied to fluid dynamic and tomography reconstruction in a FCC-Fluid Catalytic Cracking cold pilot unity, and simulation data as well. As an initial test the determination of SVD - Singular Values Decomposition - of random matrix with dimension (n , n), n=1000, using the Girco's law modified, revealed that COCGT was faster in comparison to the literature [1] cluster, which is similar and operates at the same conditions. Solution of a system of linear equations provided a new test for the COCGT performance by processing a square matrix with n=10000, computing time was 27 s and for square matrix with n=12000, computation time was 45 s. For determination of the cluster behavior in relation to 'parfor' (parallel for-loop) and 'spmd' (single program multiple data), two codes were used containing those two commands and the same problem: determination of SVD of a square matrix with n= 1000. The execution of codes by means of COCGT proved: 1) for the code with 'parfor', the performance improved with the labs number from 1 to 8 labs; 2) for the code 'spmd', just 1 lab (core) was enough to process and give results in less than 1 s. In similar situation, with the difference that now the SVD will be determined from square matrix with n1500, for code with 'parfor', and n=7000, for code with 'spmd'. That results take to conclusions: 1) for the code with 'parfor', the behavior was the same already described above; 2) for code with 'spmd', the same besides having produced a larger performance, it supports a

  19. Integration of CAD and GIS technology using ArcGIS for development of building information systems

    Directory of Open Access Journals (Sweden)

    Cvetinović Jelena M.

    2014-01-01

    Full Text Available Paper will present basic definitions and significance of implementation of information systems for facility maintenance, as well as terms Facility management (FM and FM lifecycle. The main focus of this paper is on CAD and GIS integration within ArcGIS software in order to consolidate different data formats for creating unique information system for FM.

  20. SVD application in image and data compression - Some case studies in oceanography (Developed in MATLAB)

    Digital Repository Service at National Institute of Oceanography (India)

    Murty, T.V.R.; Rao, M.M.M.; SuryaPrakash, S.; Chandramouli, P.; Murthy, K.S.R.

    An integrated friendly-user interactive multiple Ocean Application Pacakage has been developed utilizing the well known statistical technique called Singular Value Decomposition (SVD) to achieve image and data compression in MATLAB environment...

  1. Mathematical Formulation used by MATLAB Code to Convert FTIR Interferograms to Calibrated Spectra

    Energy Technology Data Exchange (ETDEWEB)

    Armstrong, Derek Elswick [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-07-19

    This report discusses the mathematical procedures used to convert raw interferograms from Fourier transform infrared (FTIR) sensors to calibrated spectra. The work discussed in this report was completed as part of the Helios project at Los Alamos National Laboratory. MATLAB code was developed to convert the raw interferograms to calibrated spectra. The report summarizes the developed MATLAB scripts and functions, along with a description of the mathematical methods used by the code. The first step in working with raw interferograms is to convert them to uncalibrated spectra by applying an apodization function to the raw data and then by performing a Fourier transform. The developed MATLAB code also addresses phase error correction by applying the Mertz method. This report provides documentation for the MATLAB scripts.

  2. ImageJ-MATLAB: a bidirectional framework for scientific image analysis interoperability.

    Science.gov (United States)

    Hiner, Mark C; Rueden, Curtis T; Eliceiri, Kevin W

    2017-02-15

    ImageJ-MATLAB is a lightweight Java library facilitating bi-directional interoperability between MATLAB and ImageJ. By defining a standard for translation between matrix and image data structures, researchers are empowered to select the best tool for their image-analysis tasks. Freely available extension to ImageJ2 ( http://imagej.net/Downloads ). Installation and use instructions available at http://imagej.net/MATLAB_Scripting. Tested with ImageJ 2.0.0-rc-54 , Java 1.8.0_66 and MATLAB R2015b. eliceiri@wisc.edu. Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

  3. The method in γ spectrum analysis with artificial neural network based on MATLAB

    International Nuclear Information System (INIS)

    Bai Lixin; Zhang Yiyun; Xu Jiayun; Wu Liping

    2003-01-01

    Analyzing γ spectrum with artificial neural network have the advantage of using the information of whole spectrum and having high analyzing precision. A convenient realization based on MATLAB was present in this

  4. Responsive Graphical User Interface (ReGUI) and its Implementation in MATLAB

    OpenAIRE

    Mikulszky, Matej; Pocsova, Jana; Mojzisova, Andrea; Podlubny, Igor

    2017-01-01

    In this paper we introduce the responsive graphical user interface (ReGUI) approach to creating applications, and demonstrate how this approach can be implemented in MATLAB. The same general technique can be used in other programming languages.

  5. Pemrograman Graphical User Interface (GUI) Dengan Matlab Untuk Mendesain Alat Bantu Opersai Matematika

    OpenAIRE

    Butar Butar, Ronisah Putra

    2011-01-01

    Graphical User Interface ( GUI) is a application program orient visual which woke up with graphical obyek in the place of comand of text for the user interaction. Graphical User Interface ( GUI) in MATLAB embraced in a application of GUIDE ( Graphical User Interface Builder). In this paper will be discuss about how disagning a appliance assist mathematics operation with program of Graphical User Interface ( GUI) with MATLAB with aim to as one of the appliance alternative assist...

  6. Matlab based Toolkits used to Interface with Optical Design Software for NASA's James Webb Space Telescope

    Science.gov (United States)

    Howard, Joseph

    2007-01-01

    The viewgraph presentation provides an introduction to the James Webb Space Telescope (JWST). The first part provides a brief overview of Matlab toolkits including CodeV, OSLO, and Zemax Toolkits. The toolkit overview examines purpose, layout, how Matlab gets data from CodeV, function layout, and using cvHELP. The second part provides examples of use with JWST, including wavefront sensitivities and alignment simulations.

  7. Hyperspectral imaging in medicine: image pre-processing problems and solutions in Matlab.

    Science.gov (United States)

    Koprowski, Robert

    2015-11-01

    The paper presents problems and solutions related to hyperspectral image pre-processing. New methods of preliminary image analysis are proposed. The paper shows problems occurring in Matlab when trying to analyse this type of images. Moreover, new methods are discussed which provide the source code in Matlab that can be used in practice without any licensing restrictions. The proposed application and sample result of hyperspectral image analysis. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. DESIGN AND IMPLEMENTATION OF DYNAMIC SYMBOLS IN DYNAMIC GIS

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Many Internet-GIS have been implemented on the web and they are increasingly bec oming an important part of multimedia cartography that has much more users as co mpared to traditional GIS production media.Internet GIS technology has provided the GIS dynamic information acquisition w ith technical support.Also,the visualization technology of electronic map ha s provided tools for GIS symbols with dynamic characteristics.On the basis of GI S dynamic information acquisition,the design idea and implementation methods of dynamic symbols in dynamic GIS are presented in this article.

  9. COSMO-SkyMed and GIS applications

    Science.gov (United States)

    Milillo, Pietro; Sole, Aurelia; Serio, Carmine

    2013-04-01

    Geographic Information Systems (GIS) and Remote Sensing have become key technology tools for the collection, storage and analysis of spatially referenced data. Industries that utilise these spatial technologies include agriculture, forestry, mining, market research as well as the environmental analysis . Synthetic Aperture Radar (SAR) is a coherent active sensor operating in the microwave band which exploits relative motion between antenna and target in order to obtain a finer spatial resolution in the flight direction exploiting the Doppler effect. SAR have wide applications in Remote Sensing such as cartography, surface deformation detection, forest cover mapping, urban planning, disasters monitoring , surveillance etc… The utilization of satellite remote sensing and GIS technology for this applications has proven to be a powerful and effective tool for environmental monitoring. Remote sensing techniques are often less costly and time-consuming for large geographic areas compared to conventional methods, moreover GIS technology provides a flexible environment for, analyzing and displaying digital data from various sources necessary for classification, change detection and database development. The aim of this work si to illustrate the potential of COSMO-SkyMed data and SAR applications in a GIS environment, in particular a demostration of the operational use of COSMO-SkyMed SAR data and GIS in real cases will be provided for what concern DEM validation, river basin estimation, flood mapping and landslide monitoring.

  10. Remote supervision of GIS monitoring system

    Energy Technology Data Exchange (ETDEWEB)

    Pannunzio, J.; Juge, P.; Ficheux, A.; Rayon, J.L. [Areva T and D Automation Canada Inc., Monteal, PQ (Canada)

    2007-07-01

    Operators of gas-insulated substations (GIS) are increasingly concerned with failure prevention, scheduled maintenance, personnel safety and shortage of maintenance crews. Until recently, the density levels of the insulating gas sulfur hexafluoride (SF6) was the only parameter controlled in gas-insulated substations. Modern digital type control and monitoring equipment have been widely used in the past decade. Remote indication of gas density and status of dynamic components was made possible and shown on local control panels. Modern GIS monitoring systems offer features such as SF6 monitoring, SF6 leakage trends, internal arc localization and detection. The required information is recorded in a local computer and displaced onto a local human machine interface (HMI) or a local industrial PC mounted next to the GIS. These monitoring systems are used as decision making tools to facilitate maintenance activities and optimize the management of assets. This paper presented the latest developments in digital monitoring systems in terms of modern digital architecture; management of information flows between monitoring systems and control systems; operation of remote supervision; configuration of high voltage substations and information sharing; and, types of links between GIS room and remote supervision. This paper also demonstrated what can be achieved by moving the central HMI of a GIS monitoring system to the decision-making centres. It was shown that integrated features that allow remote on-line or automated management have reached an acceptable level of reliability and comfort for operators. 5 figs.

  11. The architecture of a virtual grid GIS server

    Science.gov (United States)

    Wu, Pengfei; Fang, Yu; Chen, Bin; Wu, Xi; Tian, Xiaoting

    2008-10-01

    The grid computing technology provides the service oriented architecture for distributed applications. The virtual Grid GIS server is the distributed and interoperable enterprise application GIS architecture running in the grid environment, which integrates heterogeneous GIS platforms. All sorts of legacy GIS platforms join the grid as members of GIS virtual organization. Based on Microkernel we design the ESB and portal GIS service layer, which compose Microkernel GIS. Through web portals, portal GIS services and mediation of service bus, following the principle of SoC, we separate business logic from implementing logic. Microkernel GIS greatly reduces the coupling degree between applications and GIS platforms. The enterprise applications are independent of certain GIS platforms, and making the application developers to pay attention to the business logic. Via configuration and orchestration of a set of fine-grained services, the system creates GIS Business, which acts as a whole WebGIS request when activated. In this way, the system satisfies a business workflow directly and simply, with little or no new code.

  12. Using Programming Environments in Teaching GIS Concepts

    Directory of Open Access Journals (Sweden)

    Imre Bornemisza

    2009-03-01

    Full Text Available When teaching Geographical Information Systems (GIS it is important to explain the theoretical elements, but it is also necessary to illustrate the basic functions with examples. To help students it is advisable to separate the teaching of fundamentals from the practical application of complex GIS software. A simple programming language like Logo creates opportunities for acquiring knowledge in an easy way. The development of a program makes it possible tounderstand the most important categories. If the program contains query functions as well, students can learn more about problem solution methods.This paper also demonstrates the power of the Logo family of languages which is delivered by different implementations. Elica Logo is used to build simple GIS tools that provide a very widerange of educational problems and lead to numerous ideas for further explorations. The nice intuitive 3D interface is an attractive approach to gain and retain student’s engagement in thelearning process.

  13. System Simulation of Nuclear Power Plant by Coupling RELAP5 and Matlab/Simulink

    International Nuclear Information System (INIS)

    Meng Lin; Dong Hou; Zhihong Xu; Yanhua Yang; Ronghua Zhang

    2006-01-01

    Since RELAP5 code has general and advanced features in thermal-hydraulic computation, it has been widely used in transient and accident safety analysis, experiment planning analysis, and system simulation, etc. So we wish to design, analyze, verify a new Instrumentation And Control (I and C) system of Nuclear Power Plant (NPP) based on the best-estimated code, and even develop our engineering simulator. But because of limited function of simulating control and protection system in RELAP5, it is necessary to expand the function for high efficient, accurate, flexible design and simulation of I and C system. Matlab/Simulink, a scientific computation software, just can compensate the limitation, which is a powerful tool in research and simulation of plant process control. The software is selected as I and C part to be coupled with RELAP5 code to realize system simulation of NPPs. There are two key techniques to be solved. One is the dynamic data exchange, by which Matlab/Simulink receives plant parameters and returns control results. Database is used to communicate the two codes. Accordingly, Dynamic Link Library (DLL) is applied to link database in RELAP5, while DLL and S-Function is applied in Matlab/Simulink. The other problem is synchronization between the two codes for ensuring consistency in global simulation time. Because Matlab/Simulink always computes faster than RELAP5, the simulation time is sent by RELAP5 and received by Matlab/Simulink. A time control subroutine is added into the simulation procedure of Matlab/Simulink to control its simulation advancement. Through these ways, Matlab/Simulink is dynamically coupled with RELAP5. Thus, in Matlab/Simulink, we can freely design control and protection logic of NPPs and test it with best-estimated plant model feedback. A test will be shown to illuminate that results of coupling calculation are nearly the same with one of single RELAP5 with control logic. In practice, a real Pressurized Water Reactor (PWR) is

  14. Automation technology using Geographic Information System (GIS)

    Science.gov (United States)

    Brooks, Cynthia L.

    1994-01-01

    Airport Surface Movement Area is but one of the actions taken to increase the capacity and safety of existing airport facilities. The System Integration Branch (SIB) has designed an integrated system consisting of an electronic moving display in the cockpit, and includes display of taxi routes which will warn controllers and pilots of the position of other traffic and warning information automatically. Although, this system has in test simulation proven to be accurate and helpful; the initial process of obtaining an airport layout of the taxi-routes and designing each of them is a very tedious and time-consuming process. Other methods of preparing the display maps are being researched. One such method is the use of the Geographical Information System (GIS). GIS is an integrated system of computer hardware and software linking topographical, demographic and other resource data that is being referenced. The software can support many areas of work with virtually unlimited information compatibility due to the system's open architecture. GIS will allow us to work faster with increased efficiency and accuracy while providing decision making capabilities. GIS is currently being used at the Langley Research Center with other applications and has been validated as an accurate system for that task. GIS usage for our task will involve digitizing aerial photographs of the topology for each taxi-runway and identifying each position according to its specific spatial coordinates. The information currently being used can be integrated with the GIS system, due to its ability to provide a wide variety of user interfaces. Much more research and data analysis will be needed before this technique will be used, however we are hopeful this will lead to better usage of man-power and technological capabilities for the future.

  15. GIS4schools: custom-made GIS-applications for educational use

    Science.gov (United States)

    Demharter, Timo; Michel, Ulrich

    2013-10-01

    From a didactic point of view the procurement and the application of modern geographical methods and functions become more and more important. Although the integration of GIS in the classroom is repeatedly demanded, inter alia in Baden-Württemberg, Germany, the number of GIS users is small in comparison to other European countries or the USA. Possible reasons for this could, for instance, lie in the lack of GIS and computer knowledge of the teachers themselves and the subsequent extensive training effort in Desktop-GIS [1]. Today you have the technological possibilities to provide the broad public with geoinformation and geotechnology: Web technologies offer access to web-based, mobile and local applications through simple gateways. The objective of the project "GIS4schools" is to generate a service-based infrastructure, which can be operated via mobile clients as well as via Desktop-GIS or a Browser. Due to the easy availability of the services the focus is in particular on students. This circumstance is a novelty through which a differentiated approach to the implementation of GIS in schools is established. Accordingly, the pilot nature of this project becomes apparent as well as its greater importance beyond its actual content especially for the sector of media development at colleges of education. The continuity from Web-GIS to Desktop-GIS is innovative: The goal is to create an adapted multi-level solution which allows both, an easy introduction if desired or a detailed analysis - either to be achieved with a focus especially on students and their cooperation among one another.

  16. GIS-based assessment of landslide susceptibility using certainty ...

    Indian Academy of Sciences (India)

    tion systems (GIS) using different models. Many of these ... as spatial multicriteria decision analysis (MCDA) approach ... 2013), support vec- ... Landslide susceptibility assessment using mathematical methods in GIS, Qianyang China 1401.

  17. Assessment of Meteorological Drought Hazard Area using GIS in ...

    African Journals Online (AJOL)

    Michael Horsfall

    The purpose of this study was to make a model of the meteorological drought hazard area using GIS. ... overlaying different hazard indicator maps in the GIS, deploying the new model. The final ..... Northeast Thailand Project Bangkok. Min. of.

  18. Towards a Public Sector GIS Evaluation Methodology | Kurwakumire ...

    African Journals Online (AJOL)

    Towards a Public Sector GIS Evaluation Methodology. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL · RESOURCES ... However, evaluation methodologies for public sector GIS are largely lacking.

  19. Quantum GIS: il desktop GIS più potente, amichevole e libero

    Directory of Open Access Journals (Sweden)

    Otto Dassau

    2009-03-01

    Full Text Available QuantumGIS is a free and open source GISIt has an intuitive graphical interface, suitable also for first time GIS users, and thanks to the integration with other free software (e.g. GRASS, PostGIS, GDAL can read dozens of different formats, both raster and vector, link to OGC standard web services (WMS, WFS, SF and run complex analysis and modeling. Many plugins make it easy to extend its functionality. It is used throughout the world, by thousands of users, and its development is fast, with new functions continuously added.

  20. The GIS and data solution for advanced business analysis

    OpenAIRE

    RADUT Carmen

    2009-01-01

    The GIS Business Analyst is a suite of Geographic Information System (GIS)-enabled tools, wizards, and data that provides business professionals with a complete solution for site evaluation, selective customer profiling, and trade area market analysis. Running simple reports, mapping the results, and performing complex probability models are among the capabilities The GIS Business Analyst offers in one affordable desktop analysis solution. Data and analyses produced by The GIS Business Analys...

  1. Programming ArcGIS 10.1 with Python cookbook

    CERN Document Server

    Pimpler, Eric

    2013-01-01

    This book is written in a helpful, practical style with numerous hands-on recipes and chapters to help you save time and effort by using Python to power ArcGIS to create shortcuts, scripts, tools, and customizations.""Programming ArcGIS 10.1 with Python Cookbook"" is written for GIS professionals who wish to revolutionize their ArcGIS workflow with Python. Basic Python or programming knowledge is essential(?).

  2. The application of geographic information system (GIS) in forensics geoscience

    OpenAIRE

    McKinley, Jennifer

    2017-01-01

    Advances in technological developments in Geographic Information Systems (GIS) has enabled the application of GIS in landscape mapping, environmental management, natural hazard risk and disaster management. As geographi- cal information becomes more widely available through satel- lite and aerial imagery, the cost of software decreases and GIS expertise expands, it is most likely that the use of GIS will increase. The methodology has practical applications for police, crime scene investigator...

  3. What is exciting at the libraries? – GIS resources at Libraries

    OpenAIRE

    Kong, Nicole

    2017-01-01

    This presentation introduce the new GIS resources offered from Purdue University Libraries. These new support areas include the D-VELoP GIS computing lab, new Esri Development Center (EDC), GIS data portal, GIS data server, Insights for ArcGIS, and GIS VR technology.

  4. Estudio del confort térmico en la ciudad de São Paulo utilizando el modelo ENVI-MET

    Directory of Open Access Journals (Sweden)

    Ana Claudia Carfan

    2012-07-01

    Full Text Available En este estudio se analizó la comodidad termal en distintas áreas en la ciudad de São Paulo. Dos áreas diferentes fueron seleccionadas, densamente construido (Consolação y el otro fue en el Parque de Estado de Ipiranga (FISP, un área con solo unos edificios e impermeabilidad reducida. Un microclimático ENVI - encontrado fue usado para simular la atmósfera superficial de interacción en el ambiente urbano. La resolución del modelo está entre 0.5 y 10 m. Este modelo fue desarrollado por Bruse y Fleer (1998 y Bruse (2004. Por el índice de comodidad termal PMV (voto medio predicho y TMR (significan la temperatura radiante proporcionado por el modelo, esto reveló que el Parque Estatal muestra valores de PMV cerca de cómodo comparado con la otra área estudiada. El análisis del índice de comodidad termal y el flujo de viento mostró la influencia de edificios altos en el ambiente climático local.

  5. Application of GIS from the multifunctionality aspect

    Directory of Open Access Journals (Sweden)

    Mirko A. Borisov

    2011-04-01

    Full Text Available Application of computer technology in the Earth science has led to the creation and development of new scientific disciplines, particularly digital cartography and GIS. This paper describes the application of GIS from several points of view such as: multi-scale, multi-thematic, multi-viewing, accommodation to standard software platforms and multi-user data accesses. Introduction The premise of a successful usage of topographic data nowadays implies their disposal in a digital form and organisation in a modern way, suitable for further computer processing. It is a unanimous opinion that it can be successfully completed only through creating data basis of space developing GIS. The theme of the written work is the development and application of GIS, and management of topographic data in accordance with international standards and users' needs. Moving to digital technology of creating and using topographic data should not be literal translation of the analogue map into a digital picture or just the automation of the map making using digital technology. The new method implies the formation of the central topographic data base which would generate displays of arbitrary scales, desired volumes of content, changeable sheet dimensions, various thematic displays, altogether in accordance with users' demands and needs. Digital cartography and GIS The development and application of computers in the area of earth sciences caused the creation of new definitions and disciplines among which are noticeable computer supported cartography and GIS. The computer-supported cartography was in its later phase called digital cartography and it can be used in two ways: like modern technology of date processing about space and like a new discipline. The main principle on which digital cartography as a discipline is based represents the processing and visualization of data about space but with computer supported technology. Application of GIS from various aspects

  6. GIS In-Service Teacher Training Based on TPACK

    Science.gov (United States)

    Hong, Jung Eun; Stonier, Francis

    2015-01-01

    This article introduces the geographic information systems (GIS) in-service teacher training, focusing on the intersection of technological, pedagogical, and content knowledge (TPACK) for successful implementation of GIS in the classroom. Eleven social studies teachers in Georgia learned GIS technologies, inquiry-based learning, and social studies…

  7. GIS and the Social Sciences : Theory and Applications

    NARCIS (Netherlands)

    Ballas, Dimitris; Clarke, Graham; Franklin, Rachel S.; Newing, Andy

    2017-01-01

    GIS and the Social Sciences offers a uniquely social science approach on the theory and application of GIS with a range of modern examples. It explores how human geography can engage with a variety of important policy issues through linking together GIS and spatial analysis, and demonstrates the

  8. Integrating 3D Visualization and GIS in Planning Education

    Science.gov (United States)

    Yin, Li

    2010-01-01

    Most GIS-related planning practices and education are currently limited to two-dimensional mapping and analysis although 3D GIS is a powerful tool to study the complex urban environment in its full spatial extent. This paper reviews current GIS and 3D visualization uses and development in planning practice and education. Current literature…

  9. An Approach to Teaching Applied GIS: Implementation for Local Organizations.

    Science.gov (United States)

    Benhart, John, Jr.

    2000-01-01

    Describes the instructional method, Client-Life Cycle GIS Project Learning, used in a course at Indiana University of Pennsylvania that enables students to learn with and about geographic information system (GIS). Discusses the course technical issues in GIS and an example project using this method. (CMK)

  10. Visualizing Economic Development with ArcGIS Explorer

    Science.gov (United States)

    Webster, Megan L.; Milson, Andrew J.

    2011-01-01

    Numerous educators have noted that Geographic Information Systems (GIS) is a powerful tool for social studies teaching and learning. Yet the use of GIS has been hampered by issues such as the cost of the software and the management of large spatial data files. One trend that shows great promise for GIS in education is the move to cloud computing.…

  11. The portable GIS applied to geotechnical inspections; O GIS portatil para inspecoes geotecnicas

    Energy Technology Data Exchange (ETDEWEB)

    Rabaco, Lis M.; Lins, Alexandre F. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Costa, Rogerio M.; Freitas, Carlos F. [CONCREMAT, Rio de Janeiro, RJ (Brazil)

    2005-07-01

    The purpose of this paper is to implement an interface using tool to pack the GIS application to carry out a field inspection. The solution was implemented on pocket equipment using a simplified map and database integrated with the GIS Corporative. The main objective is to avoid paper work in field inspections. The emphases are on geotechnical inspections in order to assist the recuperation of information about points with geotechnical risk. There are interfaces with external device as GPS for insertion of points of risk. A set of tools are developed for bidirectional synchronization among the Corporative GIS and the pocket devices. The project focused geotechnical inspections on field, in order to synchronize automatically the information collected with the pocket GIS application with a Web server, packing all information from field operation to managers. (author)

  12. Using Web GIS for Public Health Education

    Science.gov (United States)

    Reed, Rajika E.; Bodzin, Alec M.

    2016-01-01

    An interdisciplinary curriculum unit that used Web GIS mapping to investigate malaria disease patterns and spread in relation to the environment for a high school Advanced Placement Environmental Science course was developed. A feasibility study was conducted to investigate the efficacy of the unit to promote geospatial thinking and reasoning…

  13. Teaching Tectonics to Undergraduates with Web GIS

    Science.gov (United States)

    Anastasio, D. J.; Bodzin, A.; Sahagian, D. L.; Rutzmoser, S.

    2013-12-01

    Geospatial reasoning skills provide a means for manipulating, interpreting, and explaining structured information and are involved in higher-order cognitive processes that include problem solving and decision-making. Appropriately designed tools, technologies, and curriculum can support spatial learning. We present Web-based visualization and analysis tools developed with Javascript APIs to enhance tectonic curricula while promoting geospatial thinking and scientific inquiry. The Web GIS interface integrates graphics, multimedia, and animations that allow users to explore and discover geospatial patterns that are not easily recognized. Features include a swipe tool that enables users to see underneath layers, query tools useful in exploration of earthquake and volcano data sets, a subduction and elevation profile tool which facilitates visualization between map and cross-sectional views, drafting tools, a location function, and interactive image dragging functionality on the Web GIS. The Web GIS platform is independent and can be implemented on tablets or computers. The GIS tool set enables learners to view, manipulate, and analyze rich data sets from local to global scales, including such data as geology, population, heat flow, land cover, seismic hazards, fault zones, continental boundaries, and elevation using two- and three- dimensional visualization and analytical software. Coverages which allow users to explore plate boundaries and global heat flow processes aided learning in a Lehigh University Earth and environmental science Structural Geology and Tectonics class and are freely available on the Web.

  14. Introducing GIS across Levels: Designing for Diversity

    Science.gov (United States)

    Barros, Joana

    2017-01-01

    The paper proposes a strategy for designing introductory GIS modules at Birkbeck, University of London. Seven design aspects or elements (content, practical exercises, assessment, pace, mode, level of support, and level of difficulty) for tailoring modules at appropriate levels and for diversity are introduced and their application in Birkbeck's…

  15. Più turismo con il GIS

    Directory of Open Access Journals (Sweden)

    Erminio Paolo Canavese

    2015-02-01

    Full Text Available In questa case history Virtualgeo presenta la sua soluzione per diffondere l’uso delle nuove tecnologie geomatiche a supporto del turismo grazie a un WebGIS ricco di funzionalità. La realizzazione di un percorso turistico digitale auspica di fornire possibili suggerimenti all’interno del processo di adeguamento tecnologico perseguito dalle municipalità.In this case study Virtualgeo presents its solution to spread the use of new geomatics technologies to support tourism through a webGIS that is rich of features. The creation of a tourist route through digital technology-based processing tools hopes to provide possible suggestions in the process of technological updating pursued by the municipalities of Eastern Venice, providing those simple solutions that become more and more "necessary" in an era constructed through the network. The created webGIS is a tourist product that is useful for the institutions directly concerned with the promotion of the territory; for the "natives", i.e. the citizens who often know little the area where they live, and for the eco-tourists visiting this wonderful land. The webGIS should not be neglected as an extraordinary tool of knowledge of the area (cultural heritage, landscape, environment for teaching in schools of all levels.

  16. Più turismo con il GIS

    Directory of Open Access Journals (Sweden)

    Erminio Paolo Canavese

    2015-02-01

    Full Text Available In questa case history Virtualgeo presenta la sua soluzione per diffondere l’uso delle nuove tecnologie geomatiche a supporto del turismo grazie a un WebGIS ricco di funzionalità. La realizzazione di un percorso turistico digitale auspica di fornire possibili suggerimenti all’interno del processo di adeguamento tecnologico perseguito dalle municipalità. In this case study Virtualgeo presents its solution to spread the use of new geomatics technologies to support tourism through a webGIS that is rich of features. The creation of a tourist route through digital technology-based processing tools hopes to provide possible suggestions in the process of technological updating pursued by the municipalities of Eastern Venice, providing those simple solutions that become more and more "necessary" in an era constructed through the network. The created webGIS is a tourist product that is useful for the institutions directly concerned with the promotion of the territory; for the "natives", i.e. the citizens who often know little the area where they live, and for the eco-tourists visiting this wonderful land. The webGIS should not be neglected as an extraordinary tool of knowledge of the area (cultural heritage, landscape, environment for teaching in schools of all levels.

  17. Labbtex: Toolbox para generación de informes en LATEX para Matlab

    Directory of Open Access Journals (Sweden)

    José Luis Almazán Gárate

    2012-10-01

    Full Text Available En este artículo se presenta el software desarrollado por el Equipo H3lite dentro del Departamento de Ingeneniería Civil. Transportes de la Escuela de Ingenieros de Caminos, Canales y Puertos de la Universidad Politécnica de Madrid para la generación de informes enLATEX mediante el software Matlab® y la integración en sus rutinas, Labbtex.La librería Labbtex proporciona un marco flexible para mezclar texto y código Matlab® para la generación automática de documentos. Un rchivo fuente simple contiene el texto de documentación y el código Matlab, al correr la aplicación se genera un documento final LATEX que contiene el texto, gráficos y tablas indicados con el formato de un documento LATEX. El código Matlab genera un documento LATEX usando la sintaxis. Así, LATEX (para composición de texto de alta calidad y Matlab® (para cálculo matemático pueden usarse simultáneamente. Esto permite la generación de informes en tiempo real con un uso de recursos mínimo.

  18. Integrating Online GIS into the K-12 Curricula: Lessons from the Development of a Collaborative GIS in Michigan

    Science.gov (United States)

    Henry, Paul; Semple, Hugh

    2012-01-01

    GIS has shown promise in Project Based Learning (PBL) environments, but many obstacles exist in its integration into school curriculums. This article discusses the development and utilization of an online GIS tool that was created to illustrate that the perceptual gap between relevance and ease of use of GIS software can be bridged at the K-12…

  19. Format conversion between CAD data and GIS data based on ArcGIS

    Science.gov (United States)

    Xie, Qingqing; Wei, Bo; Zhang, Kailin; Wang, Zhichao

    2015-12-01

    To make full use of the data resources and realize a sharing for the different types of data in different industries, a method of format conversion between CAD data and GIS data based on ArcGIS was proposed. To keep the integrity of the converted data, some key steps to process CAD data before conversion were made in AutoCAD. For examples, deleting unnecessary elements such as title, border and legend avoided the appearance of unnecessary elements after conversion, as layering data again by a national standard avoided the different types of elements to appear in a same layer after conversion. In ArcGIS, converting CAD data to GIS data was executed by the correspondence of graphic element classification between AutoCAD and ArcGIS. In addition, an empty geographic database and feature set was required to create in ArcGIS for storing the text data of CAD data. The experimental results show that the proposed method avoids a large amount of editing work in data conversion and maintains the integrity of spatial data and attribute data between before and after conversion.

  20. The application of GIS equipment in nuclear power plant

    International Nuclear Information System (INIS)

    Ji Lin; Huang Pengbo; Chang Xin'ai

    2012-01-01

    In this paper, the advantage and disadvantage of gas insulated switchgear (GIS) in environmental adaptability, operation safety and economic benefit are analyzed. Issues concerning the manufacture, transportation, on-site installation, operation, maintenance and extension of GIS equipment are discussed. Comparing those characteristics with air insulated switchgear (AIS), GIS is characterized by better aseismic ability, less occupied area and installation process, lower fault rate, longer maintenance period, easier for extension and higher economic benefit, SF6 gas insures the operation safety and reliability of GIS equipment, modular transport and re-assembling improves the installation flexibility. Therefore, GIS equipment may be the first choice for the primary equipment of nuclear power plant. (authors)

  1. The use of MATLAB-SIMULINK for evaluation of thermal building behavior; O uso do MATLAB-SIMULINK para avaliacao do comportamento termico de ambientes

    Energy Technology Data Exchange (ETDEWEB)

    Mendes, Nathan; Oliveira, Gustavo H.C.; Araujo, Humberto X. de [Pontificia Universidade Catolica do Parana, Curitiba, PR (Brazil). Lab. de Sistemas Termicos]|[Pontificia Universidade Catolica do Parana, Curitiba, PR (Brazil). Lab. de Automacao e Sistemas]. E-mail: nmendes@ccet.pucpr.br; oliv@ ccet.pucpr.br; araujo@ ccet.pucpr.br

    2000-07-01

    We describe a mathematical model applied to both building thermal analysis and control systems design. We use a lumped approach to model the room air temperature and a multi-layer model for the building envelope. The capacitance model allows to study the transient analysis of room air temperature when it is submitted to sinusoidal variation of external air temperature, representing a case study for the city of Curitiba-PR, Brazil. To evaluate the building performance with thermal parameters, we use MATLAB/SIMULINK. In the results section, we show the influences of thermal capacitance on the building air temperature and energy consumption and the advantages of using MATLAB/SIMULINK in building thermal and energy analysis as well. (author)

  2. Abaqus2Matlab: A suitable tool for finite element post-processing

    DEFF Research Database (Denmark)

    Papazafeiropoulos, George; Muñiz-Calvente, Miguel; Martínez Pañeda, Emilio

    2017-01-01

    A suitable piece of software is presented to connect Abaqus, a sophisticated finite element package, with Matlab, the most comprehensive program for mathematical analysis. This interface between these well- known codes not only benefits from the image processing and the integrated graph-plotting ......A suitable piece of software is presented to connect Abaqus, a sophisticated finite element package, with Matlab, the most comprehensive program for mathematical analysis. This interface between these well- known codes not only benefits from the image processing and the integrated graph...... crack propagation in structural materials by means of a cohesive zone approach. The source code, detailed documentation and a large number of tutorials can be freely downloaded from www.abaqus2matlab.com ....

  3. ABAQUS2MATLAB: A Novel Tool for Finite Element Post-Processing

    DEFF Research Database (Denmark)

    Martínez Pañeda, Emilio; Papazafeiropoulos, George; Muniz-Calvente, Miguel

    2017-01-01

    A novel piece of software is presented to connect Abaqus, a sophisticated finite element package, with Matlab, the most comprehensive program for mathematical analysis. This interface between these well-known codes not only benefits from the image processing and the integrated graph-plotting feat......A novel piece of software is presented to connect Abaqus, a sophisticated finite element package, with Matlab, the most comprehensive program for mathematical analysis. This interface between these well-known codes not only benefits from the image processing and the integrated graph...... to demonstrate its capabilities. The source code, detailed documentation and a large number of tutorials can be freely downloaded from www.abaqus2matlab.com....

  4. Measuring modules for the research of compensators of reactive power with voltage stabilization in MATLAB

    Science.gov (United States)

    Vlasayevsky, Stanislav; Klimash, Stepan; Klimash, Vladimir

    2017-10-01

    A set of mathematical modules was developed for evaluation the energy performance in the research of electrical systems and complexes in the MatLab. In the electrotechnical library SimPowerSystems of the MatLab software, there are no measuring modules of energy coefficients characterizing the quality of electricity and the energy efficiency of electrical apparatus. Modules are designed to calculate energy coefficients characterizing the quality of electricity (current distortion and voltage distortion) and energy efficiency indicators (power factor and efficiency) are presented. There are described the methods and principles of building the modules. The detailed schemes of modules built on the elements of the Simulink Library are presented, in this connection, these modules are compatible with mathematical models of electrical systems and complexes in the MatLab. Also there are presented the results of the testing of the developed modules and the results of their verification on the schemes that have analytical expressions of energy indicators.

  5. Parallel Sequential Monte Carlo for Efficient Density Combination: The Deco Matlab Toolbox

    DEFF Research Database (Denmark)

    Casarin, Roberto; Grassi, Stefano; Ravazzolo, Francesco

    This paper presents the Matlab package DeCo (Density Combination) which is based on the paper by Billio et al. (2013) where a constructive Bayesian approach is presented for combining predictive densities originating from different models or other sources of information. The combination weights...... for standard CPU computing and for Graphical Process Unit (GPU) parallel computing. For the GPU implementation we use the Matlab parallel computing toolbox and show how to use General Purposes GPU computing almost effortless. This GPU implementation comes with a speed up of the execution time up to seventy...... times compared to a standard CPU Matlab implementation on a multicore CPU. We show the use of the package and the computational gain of the GPU version, through some simulation experiments and empirical applications....

  6. Algorithm 873: LSTRS: MATLAB Software for Large-Scale Trust-Region Subproblems and Regularization

    DEFF Research Database (Denmark)

    Rojas Larrazabal, Marielba de la Caridad; Santos, Sandra A.; Sorensen, Danny C.

    2008-01-01

    A MATLAB 6.0 implementation of the LSTRS method is resented. LSTRS was described in Rojas, M., Santos, S.A., and Sorensen, D.C., A new matrix-free method for the large-scale trust-region subproblem, SIAM J. Optim., 11(3):611-646, 2000. LSTRS is designed for large-scale quadratic problems with one...... at each step. LSTRS relies on matrix-vector products only and has low and fixed storage requirements, features that make it suitable for large-scale computations. In the MATLAB implementation, the Hessian matrix of the quadratic objective function can be specified either explicitly, or in the form...... of a matrix-vector multiplication routine. Therefore, the implementation preserves the matrix-free nature of the method. A description of the LSTRS method and of the MATLAB software, version 1.2, is presented. Comparisons with other techniques and applications of the method are also included. A guide...

  7. Visualization problems in conductor thermal aging resp. comparison of matlab and gnuplot graphical outputs

    International Nuclear Information System (INIS)

    Beza, J.; Heckenbergerova, J.

    2012-01-01

    The main aim of this paper is comparison of Matlab and Gnuplot software suitability for visualization of results in electro energetic and electro engineering domain. Whole contribution is targeted on specific graphical outputs in problematic of thermal aging of overhead power transmission lines. First, all graphical outputs determined for comparison are visualized in Matlab and furthermore strengths and disadvantages of this implementation are described. Same graphics are then created by free software Gnuplot and finally comparison of both visualization software is made. Last part of the contribution contains main rules and tips about Gnuplot visualization and can be used as User Handbook. The major target of this contribution is to show advantages and shortcomings of Matlab graphical outputs together with introduction of Gnuplot software and suitable alternative for visualization of electrotechnical results. (Authors)

  8. MATLAB/SIMULINK platform for simulation of CANDU reactor control system

    International Nuclear Information System (INIS)

    Javidnia, H.; Jiang, J.

    2007-01-01

    In this paper a simulation platform for CANDU reactors' control system is presented. The platform is built on MATLAB/SIMULINK interactive graphical interface. Since MATLAB/SIMULINK are powerful tools to describe systems mathematically, all the subsystems in a CANDU reactor are represented in MATLAB's language and are implemented in SIMULINK graphical representation. The focus of the paper is on the flux control loop of CANDU reactors. However, the ideas can be extended to include other parts in CANDU power plants and the same technique can be applied to other types of nuclear reactors and their control systems. The CANDU reactor model and xenon feedback model are also discussed in this paper. (author)

  9. Changing patient population in Dhaka Hospital and Matlab Hospital of icddr,b.

    Science.gov (United States)

    Das, S K; Rahman, A; Chisti, M J; Ahmed, S; Malek, M A; Salam, M A; Bardhan, P K; Faruque, A S G

    2014-02-01

    The Diarrhoeal Disease Surveillance System of icddr,b noted increasing number of patients ≥60 years at urban Dhaka and rural Matlab from 2001 to 2012. Shigella and Vibrio cholerae were more frequently isolated from elderly people than children under 5 years and adults aged 5-59 in both areas. The resistance observed to various drugs of Shigella in Dhaka and Matlab was trimethoprim-sulphamethoxazole (72-63%), ampicillin (43-55%), nalidixic acid (58-61%), mecillinam (12-9%), azithromycin (13-0%), ciprofloxacin (11-13%) and ceftriaxone (11-0%). Vibrio cholerae isolated in Dhaka and Matlab was resistant to trimethoprim-sulphamethoxazole (98-94%), furazolidone (100%), erythromycin (71-53%), tetracycline (46-44%), ciprofloxacin (3-10%) and azithromycin (3-0%). © 2013 John Wiley & Sons Ltd.

  10. Integration of MATLAB Simulink(Registered Trademark) Models with the Vertical Motion Simulator

    Science.gov (United States)

    Lewis, Emily K.; Vuong, Nghia D.

    2012-01-01

    This paper describes the integration of MATLAB Simulink(Registered TradeMark) models into the Vertical Motion Simulator (VMS) at NASA Ames Research Center. The VMS is a high-fidelity, large motion flight simulator that is capable of simulating a variety of aerospace vehicles. Integrating MATLAB Simulink models into the VMS needed to retain the development flexibility of the MATLAB environment and allow rapid deployment of model changes. The process developed at the VMS was used successfully in a number of recent simulation experiments. This accomplishment demonstrated that the model integrity was preserved, while working within the hard real-time run environment of the VMS architecture, and maintaining the unique flexibility of the VMS to meet diverse research requirements.

  11. MATLAB algorithm to implement soil water data assimilation with the Ensemble Kalman Filter using HYDRUS.

    Science.gov (United States)

    Valdes-Abellan, Javier; Pachepsky, Yakov; Martinez, Gonzalo

    2018-01-01

    Data assimilation is becoming a promising technique in hydrologic modelling to update not only model states but also to infer model parameters, specifically to infer soil hydraulic properties in Richard-equation-based soil water models. The Ensemble Kalman Filter method is one of the most widely employed method among the different data assimilation alternatives. In this study the complete Matlab© code used to study soil data assimilation efficiency under different soil and climatic conditions is shown. The code shows the method how data assimilation through EnKF was implemented. Richards equation was solved by the used of Hydrus-1D software which was run from Matlab. •MATLAB routines are released to be used/modified without restrictions for other researchers•Data assimilation Ensemble Kalman Filter method code.•Soil water Richard equation flow solved by Hydrus-1D.

  12. Linking Advanced Visualization and MATLAB for the Analysis of 3D Gene Expression Data

    Energy Technology Data Exchange (ETDEWEB)

    Ruebel, Oliver; Keranen, Soile V.E.; Biggin, Mark; Knowles, David W.; Weber, Gunther H.; Hagen, Hans; Hamann, Bernd; Bethel, E. Wes

    2011-03-30

    Three-dimensional gene expression PointCloud data generated by the Berkeley Drosophila Transcription Network Project (BDTNP) provides quantitative information about the spatial and temporal expression of genes in early Drosophila embryos at cellular resolution. The BDTNP team visualizes and analyzes Point-Cloud data using the software application PointCloudXplore (PCX). To maximize the impact of novel, complex data sets, such as PointClouds, the data needs to be accessible to biologists and comprehensible to developers of analysis functions. We address this challenge by linking PCX and Matlab via a dedicated interface, thereby providing biologists seamless access to advanced data analysis functions and giving bioinformatics researchers the opportunity to integrate their analysis directly into the visualization application. To demonstrate the usefulness of this approach, we computationally model parts of the expression pattern of the gene even skipped using a genetic algorithm implemented in Matlab and integrated into PCX via our Matlab interface.

  13. A platform for dynamic simulation and control of movement based on OpenSim and MATLAB.

    Science.gov (United States)

    Mansouri, Misagh; Reinbolt, Jeffrey A

    2012-05-11

    Numerical simulations play an important role in solving complex engineering problems and have the potential to revolutionize medical decision making and treatment strategies. In this paper, we combine the rapid model-based design, control systems and powerful numerical method strengths of MATLAB/Simulink with the simulation and human movement dynamics strengths of OpenSim by developing a new interface between the two software tools. OpenSim is integrated with Simulink using the MATLAB S-function mechanism, and the interface is demonstrated using both open-loop and closed-loop control systems. While the open-loop system uses MATLAB/Simulink to separately reproduce the OpenSim Forward Dynamics Tool, the closed-loop system adds the unique feature of feedback control to OpenSim, which is necessary for most human movement simulations. An arm model example was successfully used in both open-loop and closed-loop cases. For the open-loop case, the simulation reproduced results from the OpenSim Forward Dynamics Tool with root mean square (RMS) differences of 0.03° for the shoulder elevation angle and 0.06° for the elbow flexion angle. MATLAB's variable step-size integrator reduced the time required to generate the forward dynamic simulation from 7.1s (OpenSim) to 2.9s (MATLAB). For the closed-loop case, a proportional-integral-derivative controller was used to successfully balance a pole on model's hand despite random force disturbances on the pole. The new interface presented here not only integrates the OpenSim and MATLAB/Simulink software tools, but also will allow neuroscientists, physiologists, biomechanists, and physical therapists to adapt and generate new solutions as treatments for musculoskeletal conditions. Copyright © 2012 Elsevier Ltd. All rights reserved.

  14. Integración del brazo robot IRB120 en entorno ROS-MATLAB

    OpenAIRE

    Gómez Cuadrado, José Manuel

    2017-01-01

    Este proyecto usa el entorno ROS (Robot Operating System) para desarrollar el control del brazo robot IRB 120 y su implementación en el entorno de trabajo MATLAB. Se explicará la creación del modelo del robot, la planificación de trayectorias y la comunicación con dicho robot. This project uses the ROS (Robot Operating System) environment for developing the control of the IRB 120 robotic arm and its implementation in the MATLAB working environment. It will explain the creation of the...

  15. Analysis of the MPEG-1 Layer III (MP3) Algorithm using MATLAB

    CERN Document Server

    Thiagarajan, Jayaraman

    2011-01-01

    The MPEG-1 Layer III (MP3) algorithm is one of the most successful audio formats for consumer audio storage and for transfer and playback of music on digital audio players. The MP3 compression standard along with the AAC (Advanced Audio Coding) algorithm are associated with the most successful music players of the last decade. This book describes the fundamentals and the MATLAB implementation details of the MP3 algorithm. Several of the tedious processes in MP3 are supported by demonstrations using MATLAB software. The book presents the theoretical concepts and algorithms used in the MP3 stand

  16. Wind Turbine Blockset in Matlab/Simulink. General Overview and Description of the Model

    DEFF Research Database (Denmark)

    Iov, Florin; Hansen, A. D.; Soerensen, P.

    This report presents a new developed Matlab/Simulink Toolbox for wind turbine applications. This toolbox has been developed during the research project ?Simulation Platform to model, optimize and design wind turbines? and it has been used as a general developer tool for other three simulation tools......: Saber, DIgSILENT, HAWC. The report provides first a quick overview over Matlab issues and then explains the structure of the developed toolbox. The attention in the report is mainly drawn to the description of the most important mathematical models, which have been developed in the Toolbox. Then, some...

  17. A MATLAB toolbox for the analysis of articulatory data in the production of speech.

    Science.gov (United States)

    Nguyen, N

    2000-08-01

    The goal of this paper is to present EMATOOLS, a set of scripts for displaying and annotating acoustic and articulatory data simultaneously in studies on speech production. These scripts were developed with the use of MATLAB, a multiplatform computing environment for numeric computation and visualization. The system is equipped with a mouse-driven graphical interface made up of a number of displays. This interface can be easily customized to speed up routine tasks. The scripts can also be used in a noninteractive way, as stand-alone MATLAB commands. Output data can be imported into any standard spreadsheet. EMATOOLS is freely available from www.lpl.univ-aix.fr/nguyen/ematools.html.

  18. Elementary mathematical and computational tools for electrical and computer engineers using Matlab

    CERN Document Server

    Manassah, Jamal T

    2013-01-01

    Ideal for use as a short-course textbook and for self-study Elementary Mathematical and Computational Tools for Electrical and Computer Engineers Using MATLAB fills that gap. Accessible after just one semester of calculus, it introduces the many practical analytical and numerical tools that are essential to success both in future studies and in professional life. Sharply focused on the needs of the electrical and computer engineering communities, the text provides a wealth of relevant exercises and design problems. Changes in MATLAB's version 6.0 are included in a special addendum.

  19. Design of PR current control with selective harmonic compensators using Matlab

    Directory of Open Access Journals (Sweden)

    Daniel Zammit

    2017-12-01

    Full Text Available This paper presents a procedure to design a Proportional Resonant (PR current controller with additional PR selective harmonic compensators for Grid Connected Photovoltaic (PV Inverters. The design of the PR current control and the harmonic compensators will be carried out using Matlab. Testing was carried out on a 3 kW Grid-Connected PV Inverter which was designed and constructed for this research. Both simulation and experimental results will be presented. Keywords: Inverters, Proportional-resonant controllers, Harmonic compensation, Photovoltaic, Matlab, SISO design tool

  20. Quantification of larval zebrafish motor function in multiwell plates using open-source MATLAB applications.

    Science.gov (United States)

    Zhou, Yangzhong; Cattley, Richard T; Cario, Clinton L; Bai, Qing; Burton, Edward A

    2014-07-01

    This article describes a method to quantify the movements of larval zebrafish in multiwell plates, using the open-source MATLAB applications LSRtrack and LSRanalyze. The protocol comprises four stages: generation of high-quality, flatly illuminated video recordings with exposure settings that facilitate object recognition; analysis of the resulting recordings using tools provided in LSRtrack to optimize tracking accuracy and motion detection; analysis of tracking data using LSRanalyze or custom MATLAB scripts; and implementation of validation controls. The method is reliable, automated and flexible, requires plate format suitable for high-throughput applications.

  1. The NNSYSID Toolbox - A MATLAB Toolbox for System Identification with Neural Networks

    DEFF Research Database (Denmark)

    Nørgård, Peter Magnus; Ravn, Ole; Hansen, Lars Kai

    1996-01-01

    To assist the identification of nonlinear dynamic systems, a set of tools has been developed for the MATLAB(R) environment. The tools include a number of different model structures, highly effective training algorithms, functions for validating trained networks, and pruning algorithms for determi......To assist the identification of nonlinear dynamic systems, a set of tools has been developed for the MATLAB(R) environment. The tools include a number of different model structures, highly effective training algorithms, functions for validating trained networks, and pruning algorithms...

  2. A Simulation Platform To Model, Optimize And Design Wind Turbines. The Matlab/Simulink Toolbox

    Directory of Open Access Journals (Sweden)

    Anca Daniela HANSEN

    2002-12-01

    Full Text Available In the last years Matlab / Simulink® has become the most used software for modeling and simulation of dynamic systems. Wind energy conversion systems are for example such systems, containing subsystems with different ranges of the time constants: wind, turbine, generator, power electronics, transformer and grid. The electrical generator and the power converter need the smallest simulation step and therefore, these blocks decide the simulation speed. This paper presents a new and integrated simulation platform for modeling, optimizing and designing wind turbines. The platform contains different simulation tools: Matlab / Simulink - used as basic modeling tool, HAWC, DIgSilent and Saber.

  3. Aspirin for the prevention of cognitive decline in the elderly: rationale and design of a neuro-vascular imaging study (ENVIS-ion

    Directory of Open Access Journals (Sweden)

    Reid Christopher M

    2012-02-01

    Full Text Available Abstract Background This paper describes the rationale and design of the ENVIS-ion Study, which aims to determine whether low-dose aspirin reduces the development of white matter hyper-intense (WMH lesions and silent brain infarction (SBI. Additional aims include determining whether a changes in retinal vascular imaging (RVI parameters parallel changes in brain magnetic resonance imaging (MRI; b changes in RVI parameters are observed with aspirin therapy; c baseline cognitive function correlates with MRI and RVI parameters; d changes in cognitive function correlate with changes in brain MRI and RVI and e whether factors such as age, gender or blood pressure influence the above associations. Methods/Design Double-blind, placebo-controlled trial of three years duration set in two Australian academic medical centre outpatient clinics. This study will enrol 600 adults aged 70 years and over with normal cognitive function and without overt cardiovascular disease. Subjects will undergo cognitive testing, brain MRI and RVI at baseline and after 3 years of study treatment. All subjects will be recruited from a 19,000-patient clinical outcome trial conducted in Australia and the United States that will evaluate the effects of aspirin in maintaining disability-free longevity over 5 years. The intervention will be aspirin 100 mg daily versus matching placebo, randomized on a 1:1 basis. Discussion This study will improve understanding of the mechanisms at the level of brain and vascular structure that underlie the effects of aspirin on cognitive function. Given the limited access and high cost of MRI, RVI may prove useful as a tool for the identification of individuals at high risk for the development of cerebrovascular disease and cognitive decline. Trial Registration clinicaltrials.gov Identifier: NCT01038583

  4. Forbedring af GIS data til trafikmodeller

    DEFF Research Database (Denmark)

    Hansen, Stephen; Landex, Alex; Nielsen, Otto Anker

    2005-01-01

    indbyggere og arbejdspladser er meget inhomogen. Dette er især tilfældet for zonerne i Frederiksborg og Roskilde Amter. For at opnå mere detaljerede resultater er det nødvendigt at opdele disse zoner. I artiklen præsenteres forskellige GIS-baserede metoder, der er blevet benyttet til at forbedre og kombinere...... eksisterende GIS-baserede datakilder, så der er opnået en hidtil uset nøjagtighed i trafikmodellernes geografiske data. Herefter beskrives, hvordan der med udgangspunkt i disse forbedrede data er foretaget analyser af zonerne i modellen, og hvordan zoner som ikke lever op til den ønske detaljegrad, er splittet...

  5. Application of IPv6 in GIS

    Science.gov (United States)

    Wang, Zhen-feng; Wang, Liang

    2008-10-01

    The inherent flaws in current network, especially the inadequate IP address space, make the born of NGN (Next Generation Network). The NGN aims to enable the information sharing and inter-operation of heterogeneous networks. As the core of NGN, IPv6 (Internet Protocol version 6), which is designed as the successor of IPv4 running now, brings us many new features. It provides larger address space, supports mobile devices, and has built-in security policy, and so on. Although it brings us so many advantages and the backbone of NGN also has been constructed in many countries, we have difficulties moving to NGN. One of the main reasons is there are few killer applications for it. So what features can be employed by GIS, and how to use them is the main content of this paper. The IPv6 certainly offers new entry to solve some problems in GIS.

  6. Quantum GIS plugin for Czech cadastral data

    Directory of Open Access Journals (Sweden)

    Anna Kratochvílová

    2012-10-01

    Full Text Available This paper presents new Quantum GIS plugin for Czech cadastral data and its development. QGIS is a rapidly developing cross-platform desktop Geographic Information System (GIS released under the GNU GPL. QGIS is written in C++, and uses the Qt library. The plugin is developed in C++, too. The new plugin can work with Czech cadastral data in the new Czech cadastral exchange data format called VFK (or NVF. Data are accessed through VFK driver of the OGR library. The plugin should facilitate the work with cadastral data by easy search and presenting well arranged information. Information is displayed in the way similar to web applications, thus the control is friendly and familiar for users. The plugin supports interaction with map using QGIS functionality and it is able to export various cadastral reports. This paper provides ideas which can be generalized to develop QGIS plugin dealing with specific data.

  7. CyberGIS software: a synthetic review and integration roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Shaowen [University of Illinois, Urbana-Champaign; Anselin, Luc [Arizona State University; Bhaduri, Budhendra L [ORNL; Cosby, Christopher [University Navstar Consortium, Boulder, CO; Goodchild, Michael [University of California, Santa Barbara; Liu, Yan [University of Illinois, Urbana-Champaign; Nygers, Timothy L. [University of Washington, Seattle

    2013-01-01

    CyberGIS defined as cyberinfrastructure-based geographic information systems (GIS) has emerged as a new generation of GIS representing an important research direction for both cyberinfrastructure and geographic information science. This study introduces a 5-year effort funded by the US National Science Foundation to advance the science and applications of CyberGIS, particularly for enabling the analysis of big spatial data, computationally intensive spatial analysis and modeling (SAM), and collaborative geospatial problem-solving and decision-making, simultaneously conducted by a large number of users. Several fundamental research questions are raised and addressed while a set of CyberGIS challenges and opportunities are identified from scientific perspectives. The study reviews several key CyberGIS software tools that are used to elucidate a vision and roadmap for CyberGIS software research. The roadmap focuses on software integration and synthesis of cyberinfrastructure, GIS, and SAM by defining several key integration dimensions and strategies. CyberGIS, based on this holistic integration roadmap, exhibits the following key characteristics: high-performance and scalable, open and distributed, collaborative, service-oriented, user-centric, and community-driven. As a major result of the roadmap, two key CyberGIS modalities gateway and toolkit combined with a community-driven and participatory approach have laid a solid foundation to achieve scientific breakthroughs across many geospatial communities that would be otherwise impossible.

  8. gisõhtu : [luuletused] / Kersti Merilaas

    Index Scriptorium Estoniae

    Merilaas, Kersti, pseud., 1913-1986

    1998-01-01

    Sisu: Sügisõhtu ; Hulguse laul ; Öö ; Mina magan ; Suletud luugid ; Viimne paat ; Usalda oma silmi ; Punane moon ; Rannapääsuke ; Mägiste Märt ; Võõrdumus ; "Minna midagi nõudmata..." ; Lihtne lauluke ; Kohtupäev ; Diogenes ; Kui põletasin need kirjad ; Laul ; Need vanad astjad ; Hobune ; Käolina ; Usutunnistus ; Nägemus

  9. Water Hammer Modelling and Simulation by GIS

    Directory of Open Access Journals (Sweden)

    K. Hariri Asli

    2012-01-01

    Full Text Available This work defined an Eulerian-based computational model compared with regression of the relationship between the dependent and independent variables for water hammer surge wave in transmission pipeline. The work also mentioned control of Unaccounted-for-Water (UFW based on the Geography Information System (GIS for water transmission pipeline. The experimental results of laboratory model and the field test results showed the validity of prediction achieved by computational model.

  10. Estimating hurricane hazards using a GIS system

    Directory of Open Access Journals (Sweden)

    A. Taramelli

    2008-08-01

    Full Text Available This paper develops a GIS-based integrated approach to the Multi-Hazard model method, with reference to hurricanes. This approach has three components: data integration, hazard assessment and score calculation to estimate elements at risk such as affected area and affected population. First, spatial data integration issues within a GIS environment, such as geographical scales and data models, are addressed. Particularly, the integration of physical parameters and population data is achieved linking remotely sensed data with a high resolution population distribution in GIS. In order to assess the number of affected people, involving heterogeneous data sources, the selection of spatial analysis units is basic. Second, specific multi-hazard tasks, such as hazard behaviour simulation and elements at risk assessment, are composed in order to understand complex hazard and provide support for decision making. Finally, the paper concludes that the integrated approach herein presented can be used to assist emergency management of hurricane consequences, in theory and in practice.

  11. STUDY NOISE POLLUTION TYUMEN USING GIS

    Directory of Open Access Journals (Sweden)

    V. A. Dobryakova

    2016-01-01

    Full Text Available One of the most harmful factors of environment of the city is the noise, and its weight among the factors adversely affecting the life and health of the population has been increasing steadily [Sheina and etc., 2007; Polovinkina and etc., 2012]. Today, most major cities of the Russian Federation (70% have a high noise pollution problem. The system of support for the monitoring and control of acoustic situation in the city can be considered noise pollution electronic cards made using geographic information systems (GIS. There are two fundamentally different approaches to the selection of software for creation of noise maps. According to the first of them, use universal multifunctional complexes GIS (ArcGIS, MapInfo. According to the distribution of data points on the noise characteristics is created TIN model. A second approach to create noise maps using highly specialized software (MapNoise, SoundPLAN, Mitha, Cadna, ExNOISE et al.. To calculate noise propagation area is divided on the grid with a certain step, the most relevant mapping purposes. Calculation of noise levels is carried out in a grid cell by measurements based on diffraction and reflection of sound barriers and absorbing underlying surface. Noise pollution is also displayed using contour lines.

  12. Public participation in GIS via mobile applications

    Science.gov (United States)

    Brovelli, Maria Antonia; Minghini, Marco; Zamboni, Giorgio

    2016-04-01

    Driven by the recent trends in the GIS domain including Volunteered Geographic Information, geo-crowdsourcing and citizen science, and fostered by the constant technological advances, collection and dissemination of geospatial information by ordinary people has become commonplace. However, applications involving user-generated geospatial content show dramatically diversified patterns in terms of incentive, type and level of participation, purpose of the activity, data/metadata provided and data quality. This study contributes to this heterogeneous context by investigating public participation in GIS within the field of mobile-based applications. Results not only show examples of how to technically build GIS applications enabling user collection and interaction with geospatial data, but they also draw conclusions about the methods and needs of public participation. We describe three projects with different scales and purposes in the context of urban monitoring and planning, and tourism valorisation. In each case, an open source architecture is used, allowing users to exploit their mobile devices to collect georeferenced information. This data is then made publicly available on specific Web viewers. Analysis of user involvement in these projects provides insights related to participation patterns which suggests some generalized conclusions.

  13. Building archaeology geodatabase in Iraq using GIS

    Directory of Open Access Journals (Sweden)

    Kalaf Abbas

    2018-01-01

    Full Text Available Geomatics has been an important tool in archaeology. The combination of Geomatics and archaeology adopters have been considered a perfect match, since archaeology often involves the study of the spatial dimension of human behavior over time, and all archaeology carries a spatial component. Since Iraqi archaeology becomes one of the main victims of destruction by negligence and terror attacks, makes our great heritages forgotten. Hence, it is necessary to build a secure database for all Iraqi archeological sites with their two main types (investigated and uninvestigated and rely on digital system by creating digital maps for each Governorate with their archeological database system. Results of archaeological studies are rich in spatial information. GIS is adept at processing these large volumes of data especially those that are geographically referenced. It is effective, accurate and a fast tool. The tools made available through GIS help in data collection, its storage and retrieval, its ability for customization and, finally, the display of the data so that it is visually comprehensible by the user. The most important aspect of GIS in archaeology lies, however, not in its use as a pure map-making tool, but in its capability to merge and analyze

  14. Highway traffic noise prediction based on GIS

    Science.gov (United States)

    Zhao, Jianghua; Qin, Qiming

    2014-05-01

    Before building a new road, we need to predict the traffic noise generated by vehicles. Traditional traffic noise prediction methods are based on certain locations and they are not only time-consuming, high cost, but also cannot be visualized. Geographical Information System (GIS) can not only solve the problem of manual data processing, but also can get noise values at any point. The paper selected a road segment from Wenxi to Heyang. According to the geographical overview of the study area and the comparison between several models, we combine the JTG B03-2006 model and the HJ2.4-2009 model to predict the traffic noise depending on the circumstances. Finally, we interpolate the noise values at each prediction point and then generate contours of noise. By overlaying the village data on the noise contour layer, we can get the thematic maps. The use of GIS for road traffic noise prediction greatly facilitates the decision-makers because of GIS spatial analysis function and visualization capabilities. We can clearly see the districts where noise are excessive, and thus it becomes convenient to optimize the road line and take noise reduction measures such as installing sound barriers and relocating villages and so on.

  15. Simulation, design and thermal analysis of a solar Stirling engine using MATLAB

    International Nuclear Information System (INIS)

    Shazly, J.H.; Hafez, A.Z.; El Shenawy, E.T.; Eteiba, M.B.

    2014-01-01

    Highlights: • Modeling and simulation for a prototype of the solar-powered Stirling engine. • The solar-powered Stirling engine working at the low temperature range. • Estimating output power from the solar Stirling engine using Matlab program. • Solar radiation simulation program presents a solar radiation data using MATLAB. - Abstract: This paper presents the modeling and simulation for a prototype of the solar-powered Stirling engine working at the low temperature range. A mathematical model for the thermal analysis of the solar-powered low temperature Stirling engine with heat transfer is developed using Matlab program. The model takes into consideration the effect of the absorber temperature on the thermal analysis like as radiation and convection heat transfer between the absorber and the working fluid as well as radiation and convection heat transfer between the lower temperature plate and the working fluid. Hence, the present analysis provides a theoretical guidance for designing and operating of the solar-powered low temperature Stirling engine system, as well as estimating output power from the solar Stirling engine using Matlab program. This study attempts to demonstrate the potential of the low temperature Stirling engine as an option for the prime movers for Photovoltaic tracking systems. The heat source temperature is 40–60 °C as the temperature available from the sun directly

  16. Mehrkörpersimulation eines ebenen Koppelgetriebes mittels Matlab / ADAMS -Co-Simulation

    OpenAIRE

    Gollee, Christian; Troll, Clemens

    2017-01-01

    Mit Hilfe der Matlab/ADAMS-Co-Simulation wird ein ebenes Koppelgetriebe (5- Gelenk) untersucht und anschließend die Wirkpaarung mit einem Stückgut betrachtet. Dabei werden verschiedene Modellierungsstufen angewendet und die Simulationsergebnisse Messergebnissen vom Versuchsstand gegenübergestellt. Daneben wird die grundlegende Herangehensweise beim Einsatz dieser Simulationswerkzeuge erläutert.

  17. HAM Construction modeling using COMSOL with MatLab Modeling Guide version 1.0.

    NARCIS (Netherlands)

    Schijndel, van A.W.M.

    2006-01-01

    This paper presents a first modeling guide for the modeling and simulation of up to full 3D dynamic Heat, Air & Moisture (HAM) transport of building constructions using COMSOL with Matlab. The modeling scripts are provided at the appendix. Furthermore, all modeling files and results are published at

  18. HAM Construction modeling using COMSOL with MatLab Modeling Guide, version 1.0

    NARCIS (Netherlands)

    Schijndel, van A.W.M.

    2006-01-01

    This paper presents a first modeling guide for the modeling and simulation of up to full 3D dynamic Heat, Air & Moisture (HAM) transport of building constructions using COMSOL with Matlab. The modeling scripts are provided at the appendix. Furthermore, all modeling files and results are published at

  19. Image enhancement using MCNP5 code and MATLAB in neutron radiography

    International Nuclear Information System (INIS)

    Tharwat, Montaser; Mohamed, Nader; Mongy, T.

    2014-01-01

    This work presents a method that can be used to enhance the neutron radiography (NR) image for objects with high scattering materials like hydrogen, carbon and other light materials. This method used Monte Carlo code, MCNP5, to simulate the NR process and get the flux distribution for each pixel of the image and determines the scattered neutron distribution that caused image blur, and then uses MATLAB to subtract this scattered neutron distribution from the initial image to improve its quality. This work was performed before the commissioning of digital NR system in Jan. 2013. The MATLAB enhancement method is quite a good technique in the case of static based film neutron radiography, while in neutron imaging (NI) technique, image enhancement and quantitative measurement were efficient by using ImageJ software. The enhanced image quality and quantitative measurements were presented in this work. - Highlights: • This work is applicable for static based film neutron radiography and digital neutron imaging. • MATLAB is a useful tool for imaging enhancement in radiographic film. • Advanced imaging processing is available in the ETRR-2 for imaging processing and data extraction. • The digital imaging system is suitable for complex shapes and sizes, while MATLAB technique is suitable for simple shapes and sizes. • Quantitative measurements are available

  20. Detecting variability in MATLAB/Simulink models : an industry-inspired technique and its evaluation

    NARCIS (Netherlands)

    Schlie, A.; Wille, D.; Schulze, S.; Cleophas, L.G.W.A.; Schaefer, I.

    2017-01-01

    Model-based languages such as MATLAB/Simulink play an essential role in the model-driven development of software systems. To comply with new requirements, it is common practice to create new variants by copying existing systems and modifying them. Commonly referred to as clone-and-own, severe

  1. Common Exercise X, step 1 using Matlab Reference: A41-T3-NL-05-4

    NARCIS (Netherlands)

    Schijndel, van A.W.M.

    2005-01-01

    This document presents a preliminary solution to Common exercise x. The exercise is solved by writing a mfile in MatLab. Appendix A provides a table with the requested calculations results, with: Orient Orientation Pin calculated internal pressure err Pin error in calculated internal pressure G1

  2. Enhancing Student Writing and Computer Programming with LATEX and MATLAB in Multivariable Calculus

    Science.gov (United States)

    Sullivan, Eric; Melvin, Timothy

    2016-01-01

    Written communication and computer programming are foundational components of an undergraduate degree in the mathematical sciences. All lower-division mathematics courses at our institution are paired with computer-based writing, coding, and problem-solving activities. In multivariable calculus we utilize MATLAB and LATEX to have students explore…

  3. Implementing ADM1 for plant-wide benchmark simulations in Matlab/Simulink

    DEFF Research Database (Denmark)

    Rosen, Christian; Vrecko, Darko; Gernaey, Krist

    2006-01-01

    , in particular if the ADM1 is to be included in dynamic simulations of plant-wide or even integrated systems. In this paper, the experiences gained from a Matlab/Simulink implementation of ADM1 into the extended COST/IWA Benchmark Simulation Model (BSM2) are presented. Aspects related to system stiffness, model...

  4. [Application of the mixed programming with Labview and Matlab in biomedical signal analysis].

    Science.gov (United States)

    Yu, Lu; Zhang, Yongde; Sha, Xianzheng

    2011-01-01

    This paper introduces the method of mixed programming with Labview and Matlab, and applies this method in a pulse wave pre-processing and feature detecting system. The method has been proved suitable, efficient and accurate, which has provided a new kind of approach for biomedical signal analysis.

  5. MBEToolbox: a Matlab toolbox for sequence data analysis in molecular biology and evolution

    Directory of Open Access Journals (Sweden)

    Xia Xuhua

    2005-03-01

    Full Text Available Abstract Background MATLAB is a high-performance language for technical computing, integrating computation, visualization, and programming in an easy-to-use environment. It has been widely used in many areas, such as mathematics and computation, algorithm development, data acquisition, modeling, simulation, and scientific and engineering graphics. However, few functions are freely available in MATLAB to perform the sequence data analyses specifically required for molecular biology and evolution. Results We have developed a MATLAB toolbox, called MBEToolbox, aimed at filling this gap by offering efficient implementations of the most needed functions in molecular biology and evolution. It can be used to manipulate aligned sequences, calculate evolutionary distances, estimate synonymous and nonsynonymous substitution rates, and infer phylogenetic trees. Moreover, it provides an extensible, functional framework for users with more specialized requirements to explore and analyze aligned nucleotide or protein sequences from an evolutionary perspective. The full functions in the toolbox are accessible through the command-line for seasoned MATLAB users. A graphical user interface, that may be especially useful for non-specialist end users, is also provided. Conclusion MBEToolbox is a useful tool that can aid in the exploration, interpretation and visualization of data in molecular biology and evolution. The software is publicly available at http://web.hku.hk/~jamescai/mbetoolbox/ and http://bioinformatics.org/project/?group_id=454.

  6. ORNL ADCP POST-PROCESSING GUIDE AND MATLAB ALGORITHMS FOR MHK SITE FLOW AND TURBULENCE ANALYSIS

    Energy Technology Data Exchange (ETDEWEB)

    Gunawan, Budi [Oak Ridge National Laboratory (ORNL); Neary, Vincent S [ORNL

    2011-09-01

    Standard methods, along with guidance for post-processing the ADCP stationary measurements using MATLAB algorithms that were evaluated and tested by Oak Ridge National Laboratory (ORNL), are presented following an overview of the ADCP operating principles, deployment methods, error sources and recommended protocols for removing and replacing spurious data.

  7. FIT3D toolbox: multiple view geometry and 3D reconstruction for Matlab

    NARCIS (Netherlands)

    Esteban, I.; Dijk, J.; Groen, F.

    2010-01-01

    FIT3D is a Toolbox built for Matlab that aims at unifying and distributing a set of tools that will allow the researcher to obtain a complete 3D model from a set of calibrated images. In this paper we motivate and present the structure of the toolbox in a tutorial and example based approach. Given

  8. A graphical user interface (gui) matlab program Synthetic_Ves For ...

    African Journals Online (AJOL)

    An interactive and robust computer program for 1D forward modeling of Schlumberger Vertical Electrical Sounding (VES) curves for multilayered earth models is presented. The Graphical User Interface (GUI) enabled software, written in MATLAB v.7.12.0.635 (R2011a), accepts user-defined geologic model parameters (i.e. ...

  9. PEMANFAATAN SOFTWARE MATLAB DALAM PEMBELAJARAN METODE NUMERIK POKOK BAHASAN SISTEM PERSAMAAN LINEAR SIMULTAN

    Directory of Open Access Journals (Sweden)

    ani muanalifah

    2016-02-01

    Dalam pembelajaran metode Numerik khususnya pada pokok bahasan Sistem Persamaan Linear Simultan diperlukan perhitungan iterasi dengan menggunakan Komputer.  Software yang digunakan untuk perhitungan Numerik salah satunya adalah MATLAB.  Dengan peman- faatan software ini ternyata sangat membantu pemebelaja- ran metode numerik

  10. Generalized Simulation Model for a Switched-Mode Power Supply Design Course Using MATLAB/SIMULINK

    Science.gov (United States)

    Liao, Wei-Hsin; Wang, Shun-Chung; Liu, Yi-Hua

    2012-01-01

    Switched-mode power supplies (SMPS) are becoming an essential part of many electronic systems as the industry drives toward miniaturization and energy efficiency. However, practical SMPS design courses are seldom offered. In this paper, a generalized MATLAB/SIMULINK modeling technique is first presented. A proposed practical SMPS design course at…

  11. The Relationship between Gender and Students' Attitude and Experience of Using a Mathematical Software Program (MATLAB)

    Science.gov (United States)

    Ocak, Mehmet A.

    2006-01-01

    This correlation study examined the relationship between gender and the students' attitude and prior knowledge of using one of the mathematical software programs (MATLAB). Participants were selected from one community college, one state university and one private college. Students were volunteers from three Calculus I classrooms (one class from…

  12. Identification of the main thermal characteristics of building components using MATLAB

    DEFF Research Database (Denmark)

    Jimenez, M.J.; Madsen, Henrik; Andersen, Klaus Kaae

    2008-01-01

    This paper presents the application of the IDENT Graphical User Interface of MATLAB to estimate the thermal properties of building components from outdoor dynamic testing, imposing appropriate physical constraints and assuming linear and time invariant parametric models. The theory is briefly...

  13. Optimizing dc-resistance of a foil wounded toroidal inductor combining matlab and comsol

    DEFF Research Database (Denmark)

    Schneider, Henrik; Andersen, Thomas; Knott, Arnold

    2013-01-01

    An optimization routine is presented to optimize the shape of a foil winding of a toroid inductor in terms of the DC resistance. MATLAB was used to define the geometry of the foil winding and COMSOL was used to import the geometry and create a 3D finite element model. The initial parameters...

  14. SIPPI: A Matlab toolbox for sampling the solution to inverse problems with complex prior information

    DEFF Research Database (Denmark)

    Hansen, Thomas Mejer; Cordua, Knud Skou; Caroline Looms, Majken

    2013-01-01

    on the solution. The combined states of information (i.e. the solution to the inverse problem) is a probability density function typically referred to as the a posteriori probability density function. We present a generic toolbox for Matlab and Gnu Octave called SIPPI that implements a number of methods...

  15. Small-signal modelling and analysis of switching converters using MATLAB

    NARCIS (Netherlands)

    Duarte, J.L.

    1998-01-01

    A general procedure for the description of power electronic circuit dynamics is proposed, with the intention of control system design and discrete-time system simulation. The approach is especially suited to be used along with computeraided analysis and synthesis software packages such as MATLAB.

  16. Computer Based Learning in an Undergraduate Physics Laboratory: Interfacing and Instrument Control Using Matlab

    Science.gov (United States)

    Sharp, J. S.; Glover, P. M.; Moseley, W.

    2007-01-01

    In this paper we describe the recent changes to the curriculum of the second year practical laboratory course in the School of Physics and Astronomy at the University of Nottingham. In particular, we describe how Matlab has been implemented as a teaching tool and discuss both its pedagogical advantages and disadvantages in teaching undergraduate…

  17. Teaching Tool for a Control Systems Laboratory Using a Quadrotor as a Plant in MATLAB

    Science.gov (United States)

    Khan, Subhan; Jaffery, Mujtaba Hussain; Hanif, Athar; Asif, Muhammad Rizwan

    2017-01-01

    This paper presents a MATLAB-based application to teach the guidance, navigation, and control concepts of a quadrotor to undergraduate students, using a graphical user interface (GUI) and 3-D animations. The Simulink quadrotor model is controlled by a proportional integral derivative controller and a linear quadratic regulator controller. The GUI…

  18. Development of MATLAB software to control data acquisition from a multichannel systems multi-electrode array.

    Science.gov (United States)

    Messier, Erik

    2016-08-01

    A Multichannel Systems (MCS) microelectrode array data acquisition (DAQ) unit is used to collect multichannel electrograms (EGM) from a Langendorff perfused rabbit heart system to study sudden cardiac death (SCD). MCS provides software through which data being processed by the DAQ unit can be displayed and saved, but this software's combined utility with MATLAB is not very effective. MCSs software stores recorded EGM data in a MathCad (MCD) format, which is then converted to a text file format. These text files are very large, and it is therefore very time consuming to import the EGM data into MATLAB for real-time analysis. Therefore, customized MATLAB software was developed to control the acquisition of data from the MCS DAQ unit, and provide specific laboratory accommodations for this study of SCD. The developed DAQ unit control software will be able to accurately: provide real time display of EGM signals; record and save EGM signals in MATLAB in a desired format; and produce real time analysis of the EGM signals; all through an intuitive GUI.

  19. Computer-Aided Teaching Using MATLAB/Simulink for Enhancing an IM Course With Laboratory Tests

    Science.gov (United States)

    Bentounsi, A.; Djeghloud, H.; Benalla, H.; Birem, T.; Amiar, H.

    2011-01-01

    This paper describes an automatic procedure using MATLAB software to plot the circle diagram for two induction motors (IMs), with wound and squirrel-cage rotors, from no-load and blocked-rotor tests. The advantage of this approach is that it avoids the need for a direct load test in predetermining the IM characteristics under reduced power.…

  20. DynaSim: A MATLAB Toolbox for Neural Modeling and Simulation.

    Science.gov (United States)

    Sherfey, Jason S; Soplata, Austin E; Ardid, Salva; Roberts, Erik A; Stanley, David A; Pittman-Polletta, Benjamin R; Kopell, Nancy J

    2018-01-01

    DynaSim is an open-source MATLAB/GNU Octave toolbox for rapid prototyping of neural models and batch simulation management. It is designed to speed up and simplify the process of generating, sharing, and exploring network models of neurons with one or more compartments. Models can be specified by equations directly (similar to XPP or the Brian simulator) or by lists of predefined or custom model components. The higher-level specification supports arbitrarily complex population models and networks of interconnected populations. DynaSim also includes a large set of features that simplify exploring model dynamics over parameter spaces, running simulations in parallel using both multicore processors and high-performance computer clusters, and analyzing and plotting large numbers of simulated data sets in parallel. It also includes a graphical user interface (DynaSim GUI) that supports full functionality without requiring user programming. The software has been implemented in MATLAB to enable advanced neural modeling using MATLAB, given its popularity and a growing interest in modeling neural systems. The design of DynaSim incorporates a novel schema for model specification to facilitate future interoperability with other specifications (e.g., NeuroML, SBML), simulators (e.g., NEURON, Brian, NEST), and web-based applications (e.g., Geppetto) outside MATLAB. DynaSim is freely available at http://dynasimtoolbox.org. This tool promises to reduce barriers for investigating dynamics in large neural models, facilitate collaborative modeling, and complement other tools being developed in the neuroinformatics community.

  1. SIPPI: A Matlab toolbox for sampling the solution to inverse problems with complex prior information

    DEFF Research Database (Denmark)

    Hansen, Thomas Mejer; Cordua, Knud Skou; Looms, Majken Caroline

    2013-01-01

    We present an application of the SIPPI Matlab toolbox, to obtain a sample from the a posteriori probability density function for the classical tomographic inversion problem. We consider a number of different forward models, linear and non-linear, such as ray based forward models that rely...

  2. MATLAB-Based Program for Teaching Autocorrelation Function and Noise Concepts

    Science.gov (United States)

    Jovanovic Dolecek, G.

    2012-01-01

    An attractive MATLAB-based tool for teaching the basics of autocorrelation function and noise concepts is presented in this paper. This tool enhances traditional in-classroom lecturing. The demonstrations of the tool described here highlight the description of the autocorrelation function (ACF) in a general case for wide-sense stationary (WSS)…

  3. ANALYSIS AND SIMULATION OF INDUSTRIAL manipulators K 180 by a software MATLAB

    Directory of Open Access Journals (Sweden)

    Slobodan Stefanović

    2014-07-01

    Full Text Available Robotics is a multidisciplinary branch of science that integrates knowledge from many areas of mechanics, electronics, computer science and automation. Due to the large application in practice often goes in some parts of medicine, art, economics. Further in the presentation we will experimentally demonstrate the application of MATLAB 2010 to create industrial robot KR 80 and movement simulations.

  4. Is Nigeria losing its natural vegetation and landscape? Assessing the landuse-landcover change trajectories and effects in Onitsha using remote sensing and GIS

    Science.gov (United States)

    Nwaogu, Chukwudi; Okeke, Onyedikachi J.; Fadipe, Olusola O.; Bashiru, Kehinde A.; Pechanec, Vilém

    2017-12-01

    Onitsha is one of the largest commercial cities in Africa with its population growth rate increasing arithmetically for the past two decades. This situation has direct and indirect effects on the natural resources including vegetation and water. The study aimed at assessing land use-land cover (LULC) change and its effects on the vegetation and landscape from 1987 to 2015 using geoinformatics. Supervised and unsupervised classifications including maximum likelihood algorithm were performed using ENVI 4.7 and ArcGIS 10.1 versions. The LULC was classified into 7 classes: built-up areas (settlement), waterbody, thick vegetation, light vegetation, riparian vegetation, sand deposit (bare soil) and floodplain. The result revealed that all the three vegetation types decreased in areas throughout the study period while, settlement, sand deposit and floodplain areas have remarkable increase of about 100% in 2015 when compared with the total in 1987. Number of dominant plant species decreased continuously during the study. The overall classification accuracies in 1987, 2002 and 2015 was 90.7%, 92.9% and 95.5% respectively. The overall kappa coefficient of the image classification for 1987, 2002 and 2015 was 0.98, 0.93 and 0.96 respectively. In general, the average classification was above 90%, a proof that the classification was reliable and acceptable.

  5. The Coastal Area Development Using GIS (Review of GIS Application Models

    Directory of Open Access Journals (Sweden)

    Prastowo Sutanto

    2004-01-01

    Full Text Available GIS, Geographical Information System, is a means that an be used to plan and to develop the coastal area because in carrying out the analysis this system combines the space data and their  attributes. The activities done among others the prototype development of algae cultivation and tourism ativities, the development of fish pond location, the reclamation of the Jakarta Bay, and the concept of development the floating “Keramba” for pearl oysters and white sea fish similar to sole. GIS analysis with heaviness and overlay mapping yields the appropriate map to plan and to develop the coastal area. The result of GIS analysis can be used to plan and to develop the coastal area.

  6. Three-dimensional rendering of segmented object using matlab - biomed 2010.

    Science.gov (United States)

    Anderson, Jeffrey R; Barrett, Steven F

    2010-01-01

    The three-dimensional rendering of microscopic objects is a difficult and challenging task that often requires specialized image processing techniques. Previous work has been described of a semi-automatic segmentation process of fluorescently stained neurons collected as a sequence of slice images with a confocal laser scanning microscope. Once properly segmented, each individual object can be rendered and studied as a three-dimensional virtual object. This paper describes the work associated with the design and development of Matlab files to create three-dimensional images from the segmented object data previously mentioned. Part of the motivation for this work is to integrate both the segmentation and rendering processes into one software application, providing a seamless transition from the segmentation tasks to the rendering and visualization tasks. Previously these tasks were accomplished on two different computer systems, windows and Linux. This transition basically limits the usefulness of the segmentation and rendering applications to those who have both computer systems readily available. The focus of this work is to create custom Matlab image processing algorithms for object rendering and visualization, and merge these capabilities to the Matlab files that were developed especially for the image segmentation task. The completed Matlab application will contain both the segmentation and rendering processes in a single graphical user interface, or GUI. This process for rendering three-dimensional images in Matlab requires that a sequence of two-dimensional binary images, representing a cross-sectional slice of the object, be reassembled in a 3D space, and covered with a surface. Additional segmented objects can be rendered in the same 3D space. The surface properties of each object can be varied by the user to aid in the study and analysis of the objects. This inter-active process becomes a powerful visual tool to study and understand microscopic objects.

  7. Gene ARMADA: an integrated multi-analysis platform for microarray data implemented in MATLAB.

    Science.gov (United States)

    Chatziioannou, Aristotelis; Moulos, Panagiotis; Kolisis, Fragiskos N

    2009-10-27

    The microarray data analysis realm is ever growing through the development of various tools, open source and commercial. However there is absence of predefined rational algorithmic analysis workflows or batch standardized processing to incorporate all steps, from raw data import up to the derivation of significantly differentially expressed gene lists. This absence obfuscates the analytical procedure and obstructs the massive comparative processing of genomic microarray datasets. Moreover, the solutions provided, heavily depend on the programming skills of the user, whereas in the case of GUI embedded solutions, they do not provide direct support of various raw image analysis formats or a versatile and simultaneously flexible combination of signal processing methods. We describe here Gene ARMADA (Automated Robust MicroArray Data Analysis), a MATLAB implemented platform with a Graphical User Interface. This suite integrates all steps of microarray data analysis including automated data import, noise correction and filtering, normalization, statistical selection of differentially expressed genes, clustering, classification and annotation. In its current version, Gene ARMADA fully supports 2 coloured cDNA and Affymetrix oligonucleotide arrays, plus custom arrays for which experimental details are given in tabular form (Excel spreadsheet, comma separated values, tab-delimited text formats). It also supports the analysis of already processed results through its versatile import editor. Besides being fully automated, Gene ARMADA incorporates numerous functionalities of the Statistics and Bioinformatics Toolboxes of MATLAB. In addition, it provides numerous visualization and exploration tools plus customizable export data formats for seamless integration by other analysis tools or MATLAB, for further processing. Gene ARMADA requires MATLAB 7.4 (R2007a) or higher and is also distributed as a stand-alone application with MATLAB Component Runtime. Gene ARMADA provides a

  8. An Introduction to Transient Engine Applications Using the Numerical Propulsion System Simulation (NPSS) and MATLAB

    Science.gov (United States)

    Chin, Jeffrey C.; Csank, Jeffrey T.; Haller, William J.; Seidel, Jonathan A.

    2016-01-01

    This document outlines methodologies designed to improve the interface between the Numerical Propulsion System Simulation framework and various control and dynamic analyses developed in the Matlab and Simulink environment. Although NPSS is most commonly used for steady-state modeling, this paper is intended to supplement the relatively sparse documentation on it's transient analysis functionality. Matlab has become an extremely popular engineering environment, and better methodologies are necessary to develop tools that leverage the benefits of these disparate frameworks. Transient analysis is not a new feature of the Numerical Propulsion System Simulation (NPSS), but transient considerations are becoming more pertinent as multidisciplinary trade-offs begin to play a larger role in advanced engine designs. This paper serves to supplement the relatively sparse documentation on transient modeling and cover the budding convergence between NPSS and Matlab based modeling toolsets. The following sections explore various design patterns to rapidly develop transient models. Each approach starts with a base model built with NPSS, and assumes the reader already has a basic understanding of how to construct a steady-state model. The second half of the paper focuses on further enhancements required to subsequently interface NPSS with Matlab codes. The first method being the simplest and most straightforward but performance constrained, and the last being the most abstract. These methods aren't mutually exclusive and the specific implementation details could vary greatly based on the designer's discretion. Basic recommendations are provided to organize model logic in a format most easily amenable to integration with existing Matlab control toolsets.

  9. PROMAB-GIS: A GIS based Tool for Estimating Runoff and Sediment Yield in running Waters

    Science.gov (United States)

    Jenewein, S.; Rinderer, M.; Ploner, A.; Sönser, T.

    2003-04-01

    In recent times settlements have expanded, traffic and tourist activities have increased in most alpine regions. As a consequence, on the one hand humans and goods are affected by natural hazard processes more often, while on the other hand the demand for protection by both technical constructions and planning measures carried out by public authorities is growing. This situation results in an ever stronger need of reproducibility, comparability, transparency of all methods applied in modern natural hazard management. As a contribution to a new way of coping this situation Promab-GIS Version 1.0 has been developed. Promab-Gis has been designed as a model for time- and space-dependent determination of both runoff and bedload transport in rivers of small alpine catchment areas. The estimation of the unit hydrograph relies upon the "rational formula" and the time-area curves of the watershed. The time area diagram is a graph of cumulative drainage area contributing to discharge at the watershed outlet within a specified time of travel. The sediment yield is estimated for each cell of the channel network by determining the actual process type (erosion, transport or accumulation). Two types of transport processes are considered, sediment transport and debris flows. All functions of Promab-GIS are integrated in the graphical user interface of ArcView as pull-up menus and tool buttons. Hence the application of Promab-GIS does not rely on a sophisticated knowledge of GIS in general, respectively the ArcView software. However, despite the use of computer assistance, Promab-GIS still is an expert support system. In order to obtain plausible results, the users must be familiar with all the relevant processes controlling runoff and sediment yield in torrent catchments.

  10. Identifying Skill Requirements for GIS Positions: A Content Analysis of Job Advertisements

    Science.gov (United States)

    Hong, Jung Eun

    2016-01-01

    This study identifies the skill requirements for geographic information system (GIS) positions, including GIS analysts, programmers/developers/engineers, specialists, and technicians, through a content analysis of 946 GIS job advertisements from 2007-2014. The results indicated that GIS job applicants need to possess high levels of GIS analysis…

  11. When Informationists Get Involved: the CHICA-GIS Project.

    Science.gov (United States)

    Whipple, Elizabeth C; Odell, Jere D; Ralston, Rick K; Liu, Gilbert C

    2013-01-01

    Child Health Improvement through Computer Automation (CHICA) is a computer decision support system (CDSS) that interfaces with existing electronic medical record systems (EMRS) and delivers "just-in-time" patient-relevant guidelines to physicians during the clinical encounter and accurately captures structured data from all who interact with the system. "Delivering Geospatial Intelligence to Health Care Professionals (CHICA-GIS)" (1R01LM010923-01) expands the medical application of Geographic Information Systems (GIS) by integrating a geographic information system with CHICA. To provide knowledge management support for CHICA-GIS, three informationists at the Indiana University School of Medicine were awarded a supplement from the National Library Medicine. The informationists will enhance CHICA-GIS by: improving the accuracy and accessibility of information, managing and mapping the knowledge which undergirds the CHICA-GIS decision support tool, supporting community engagement and consumer health information outreach, and facilitating the dissemination of new CHICA-GIS research results and services.

  12. Open Source GIS Connectors to NASA GES DISC Satellite Data

    Science.gov (United States)

    Kempler, Steve; Pham, Long; Yang, Wenli

    2014-01-01

    The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) houses a suite of high spatiotemporal resolution GIS data including satellite-derived and modeled precipitation, air quality, and land surface parameter data. The data are valuable to various GIS research and applications at regional, continental, and global scales. On the other hand, many GIS users, especially those from the ArcGIS community, have difficulties in obtaining, importing, and using our data due to factors such as the variety of data products, the complexity of satellite remote sensing data, and the data encoding formats. We introduce a simple open source ArcGIS data connector that significantly simplifies the access and use of GES DISC data in ArcGIS.

  13. A GIS tool for the economic assessment of renewable technologies

    International Nuclear Information System (INIS)

    Mahmmud, F.; Woods, J.; Watson, S.; Halliday, J.; Hossain, J.

    1997-01-01

    A Geographical Information System (GIS) has the potential to analyse a large area for the optimum selection and siting of renewable energy systems. This paper reports on a GIS based scheme for the economic assessment of a selected number of wind and photovoltaic systems in the state of Karnataka, in India. This involved the implementation of an appropriate GIS methodology. The preparation of the GIS database is often the most arduous task in GIS operations. Thus, a description of the GIS methodology and the preparation of the database for the analysis of a selection of wind and photovoltaic systems is given. This approach has enabled the identification of the high potential areas in terms of the levelised electricity costs. An overall assessment of the region for present and future scenarios is also given. (author)

  14. Evaluation of AirGIS: a GIS-based air pollution and human exposure modelling system

    DEFF Research Database (Denmark)

    Ketzel, Matthias; Berkowicz, Ruwim; Hvidberg, Martin

    2011-01-01

    This study describes in brief the latest extensions of the Danish Geographic Information System (GIS)-based air pollution and human exposure modelling system (AirGIS), which has been developed in Denmark since 2001 and gives results of an evaluation with measured air pollution data. The system...... shows, in general, a good performance for both long-term averages (annual and monthly averages), short-term averages (hourly and daily) as well as when reproducing spatial variation in air pollution concentrations. Some shortcomings and future perspectives of the system are discussed too....

  15. Renewable energies supported by GIS and land management; Erneuerbare Energien unterstuetzt durch GIS und Landmanagement

    Energy Technology Data Exchange (ETDEWEB)

    Klaerle, Martina (ed.)

    2012-11-01

    The author of the book under consideration reports on the support of renewable energy sources by Geographical Information Systems (GIS) and land management. The first part of this book is addressed to actual land political and planning legal fundamentals of the energy policy turnaround as well as on future developments of the planning instruments. The second part of this book presents GIS based tools and concrete application examples which are very valuable for regional authorities in the implementation of the energy policy turnaround: solar plant cadastre, holistic potential analysis for all forms of renewable energy systems, visibility studies, flexible power grids and so forth.

  16. INTEGRATION OF GIS AND BIM FOR INDOOR GEOVISUAL ANALYTICS

    Directory of Open Access Journals (Sweden)

    B. Wu

    2016-06-01

    Full Text Available This paper presents an endeavour of integration of GIS (Geographical Information System and BIM (Building Information Modelling for indoor geovisual analytics. The merits of two types of technologies, GIS and BIM are firstly analysed in the context of indoor environment. GIS has well-developed capabilities of spatial analysis such as network analysis, while BIM has the advantages for indoor 3D modelling and dynamic simulation. This paper firstly investigates the important aspects for integrating GIS and BIM. Different data standards and formats such as the IFC (Industry Foundation Classes and GML (Geography Markup Language are discussed. Their merits and limitations in data transformation between GIS and BIM are analysed in terms of semantic and geometric information. An optimized approach for data exchange between GIS and BIM datasets is then proposed. After that, a strategy of using BIM for 3D indoor modelling, GIS for spatial analysis, and BIM again for visualization and dynamic simulation of the analysis results is presented. Based on the developments, this paper selects a typical problem, optimized indoor emergency evacuation, to demonstrate the integration of GIS and BIM for indoor geovisual analytics. The block Z of the Hong Kong Polytechnic University is selected as a test site. Detailed indoor and outdoor 3D models of the block Z are created using a BIM software Revit. The 3D models are transferred to a GIS software ArcGIS to carry out spatial analysis. Optimized evacuation plans considering dynamic constraints are generated based on network analysis in ArcGIS assuming there is a fire accident inside the building. The analysis results are then transferred back to BIM software for visualization and dynamic simulation. The developed methods and results are of significance to facilitate future development of GIS and BIM integrated solutions in various applications.

  17. GISMOVA. GIS-baseret moniteringsstrategi i vandforsyningen. 2. del - Vejledning

    OpenAIRE

    Larsen, Sille Lyster; Christensen, Sarah Christine Boesgaard; Albrechtsen, Hans-Jørgen; Rygaard, Martin

    2015-01-01

    GISMOVA - GIS-baseret MOniteringsstrategi i VAndforsyningen – er en GIS-baseret analysemetode til at udpege prøvetagningssteder, til kontrol af drikkevandskvalitet i vandforsyningens distributionssystem. Første del: GISMOVA - GIS-baseret Moniteringsstrategi i Vandforsyningen. 1. del - Introduktion, baggrund og metode, beskriver baggrunden for GISMOVA, samt sammenfatning og inspiration til metoden (Larsen et al. 2015). Denne 2. del demonstrerer GISMOVA, anvendt på VandCenter Syds (VCS) distrib...

  18. Automatic analysis of intrinsic positional verification films brachytherapy using MATLAB; Analisis automatico de peliculas de verificacion posicional intrinsica en braqueterapia mediante MATLAB

    Energy Technology Data Exchange (ETDEWEB)

    Quiros Higueras, J. D.; Marco Blancas, N. de; Ruiz Rodriguez, J. C.

    2011-07-01

    One of the essential tests in quality control of brachytherapy equipment is verification auto load intrinsic positional radioactive source. A classic method for evaluation is the use of x-ray film and measuring the distance between the marks left by autoradiography of the source with respect to a reference. In our center has developed an automated method of measurement by the radiochromic film scanning and implementation of a macro developed in Matlab, in order to optimize time and reduce uncertainty in the measurement. The purpose of this paper is to describe the method developed, assess their uncertainty and quantify their advantages over the manual method. (Author)

  19. Computer-based instrumentation for partial discharge detection in GIS

    International Nuclear Information System (INIS)

    Md Enamul Haque; Ahmad Darus; Yaacob, M.M.; Halil Hussain; Feroz Ahmed

    2000-01-01

    Partial discharge is one of the prominent indicators of defects and insulation degradation in a Gas Insulated Switchgear (GIS). Partial discharges (PD) have a harmful effect on the life of insulation of high voltage equipment. The PD detection using acoustic technique and subsequent analysis is currently an efficient method of performing non-destructive testing of GIS apparatus. A low cost PC-based acoustic PD detection instrument has been developed for the non-destructive diagnosis of GIS. This paper describes the development of a PC-based instrumentation system for partial discharge detection in GIS and some experimental results have also presented. (Author)

  20. Ground subsidence information as a valuable layer in GIS analysis

    Science.gov (United States)

    Murdzek, Radosław; Malik, Hubert; Leśniak, Andrzej

    2018-04-01

    Among the technologies used to improve functioning of local governments the geographic information systems (GIS) are widely used. GIS tools allow to simultaneously integrate spatial data resources, analyse them, process and use them to make strategic decisions. Nowadays GIS analysis is widely used in spatial planning or environmental protection. In these applications a number of spatial information are utilized, but rarely it is an information about environmental hazards. This paper includes information about ground subsidence that occurred in USCB mining area into GIS analysis. Monitoring of this phenomenon can be carried out using the radar differential interferometry (DInSAR) method.

  1. Ground subsidence information as a valuable layer in GIS analysis

    Directory of Open Access Journals (Sweden)

    Murdzek Radosław

    2018-01-01

    Full Text Available Among the technologies used to improve functioning of local governments the geographic information systems (GIS are widely used. GIS tools allow to simultaneously integrate spatial data resources, analyse them, process and use them to make strategic decisions. Nowadays GIS analysis is widely used in spatial planning or environmental protection. In these applications a number of spatial information are utilized, but rarely it is an information about environmental hazards. This paper includes information about ground subsidence that occurred in USCB mining area into GIS analysis. Monitoring of this phenomenon can be carried out using the radar differential interferometry (DInSAR method.

  2. Geographical Information Systems (GIS); Sistemas de Informacion Geografica

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Santiago, P.A. [Inisel Espacio, Madrid (Spain)

    1994-12-31

    Geographical Information Systems (GIS) have converted in a computer`s tool that due of its great versatility, exceeds of its usage as Basic Cartography Manager. The best GIS to use (vector or raster) will depend on the type of data we work with, we should keep in mind that the use of a specific GIS does not mean total incompatibility with others GIS. Future tendencies in this field aim to Data Storage Optimization and to Shared Operating System between Workstations and Personal computers. (Author)

  3. Sensuous and Reflexive GIS: exploring visualisation and VRML

    Directory of Open Access Journals (Sweden)

    Mark Gillings

    1996-09-01

    Full Text Available Over the last five years, landscape-based archaeological research has been transformed as the widespread introduction of Geographical Information Systems (GIS has begun to revolutionise the way we, as archaeologists, manage and manipulate spatial information. As GIS-based applications begin to reach maturity and the role of GIS as a flexible mechanism for the articulation, exploration and analysis of landscape data becomes more fully realised, GIS is increasingly being seen as much as a place to think as a simple data management and mapping tool.

  4. Parallel Performance of Pure MATLAB "M-files" versus "C-code" as Applied to Formation of Wide-Bandwidth and Wide-Beamwidth SAR Imagery

    National Research Council Canada - National Science Library

    Nehrbass, John

    2003-01-01

    .... For scientists in the area of Signal and Image processing, MATLAB is often the tool of choice. MATLAB allows extremely rapid prototyping and debugging of complicated studies with a minimal of computer science expertise...

  5. THE CONTRIBUTION OF GIS IN FLOOD MAPPING: TWO APPROACHES USING OPEN SOURCE GRASS GIS SOFTWARE

    Directory of Open Access Journals (Sweden)

    R. Marzocchi

    2014-01-01

    In this work we present a comparison between the two models mentioned above. We analyse the possibility of integrating these two approaches. We intend to use the 1D model, GIS embedded if possible, to calculate the water surface profile along the river axis and the 2D numerical one to analyse inundation beside the river levees.

  6. Advanced GIS Exercise: Performing Error Analysis in ArcGIS ModelBuilder

    Science.gov (United States)

    Hall, Steven T.; Post, Christopher J.

    2009-01-01

    Knowledge of Geographic Information Systems is quickly becoming an integral part of the natural resource professionals' skill set. With the growing need of professionals with these skills, we created an advanced geographic information systems (GIS) exercise for students at Clemson University to introduce them to the concept of error analysis,…

  7. GIS for Nevada railroads: 1993 report

    International Nuclear Information System (INIS)

    Carr, J.R.

    1993-12-01

    This is an interim report on a task within a large, ongoing study by the University of Nevada, Reno to examine the safety of Nevada railroads. The overall goal, of which this year's research is a middle stage, is to develop models based on the use of geographic information systems (GIS). These models are to enable the selection of the best and safest railway routes for the transport of high-level nuclear waste across Nevada to the proposed repository at Yucca Mountain. Last year's research concluded that the databases are adequate and that GIS are feasible and desirable for displaying the multi-layered data required to reach decisions about safety. It developed several database layers. This report deals with work during 1993 on the use of geographic information systems (GIS) for rail-route selection. The goal was to identify and assemble many of the databases necessary for the models. In particular, the research aimed to identify (a) any problems with developing database layers; and (b) the level of effort required. This year's effort developed database layers for two Nevada counties: Clark and Lincoln. The layers dealt with: topographic information, geologic information, and land ownership. These are among the most important database layers. The database layers were successfully created. No significant problems arose in developing them. The level of effort did not exceed the expected level. The most effective approach is by means of digital, shaded relief maps. (Sample maps appear in plates.) Therefore, future database development will be straightforward. Research may proceed on the full development of shaded relief elevation maps for Elko, White Pine, Nye and Eureka counties and with actual modeling for the selection of a route or routes between the UP/SP line in northern Nevada and Yucca Mountain

  8. Optimization of Grillages Using Genetic Algorithms for Integrating Matlab and Fortran Environments

    Directory of Open Access Journals (Sweden)

    Darius Mačiūnas

    2012-12-01

    Full Text Available The purpose of the paper is to present technology applied for the global optimization of grillage-type pile foundations (further grillages. The goal of optimization is to obtain the optimal layout of pile placement in the grillages. The problem can be categorized as a topology optimization problem. The objective function is comprised of maximum reactive force emerging in a pile. The reactive force is minimized during the procedure of optimization during which variables enclose the positions of piles beneath connecting beams. Reactive forces in all piles are computed utilizing an original algorithm implemented in the Fortran programming language. The algorithm is integrated into the MatLab environment where the optimization procedure is executed utilizing a genetic algorithm. The article also describes technology enabling the integration of MatLab and Fortran environments. The authors seek to evaluate the quality of a solution to the problem analyzing experimental results obtained applying the proposed technology.

  9. Optics learning by computing, with examples using Maple, MathCad, Mathematica, and MATLAB

    CERN Document Server

    Moeller, Karl Dieter

    2007-01-01

    This new edition is intended for a one semester course in optics for juniors and seniors in science and engineering; it uses scripts from Maple, MathCad, Mathematica, and MATLAB provide a simulated laboratory where students can learn by exploration and discovery instead of passive absorption. The text covers all the standard topics of a traditional optics course, including: geometrical optics and aberration, interference and diffraction, coherence, Maxwell's equations, wave guides and propagating modes, blackbody radiation, atomic emission and lasers, optical properties of materials, Fourier transforms and FT spectroscopy, image formation, and holography. It contains step by step derivations of all basic formulas in geometrical, wave and Fourier optics. The basic text is supplemented by over 170 files in Maple, MathCad, Mathematica, and MATLAB (many of which are in the text, each suggesting programs to solve a particular problem, and each linked to a topic in or application of optics. The computer files are d...

  10. Desarrollo de una interfaz para el control del robot IRB desde Matlab

    OpenAIRE

    Gutiérrez Corbacho, Azahara

    2014-01-01

    El objetivo de este proyecto es realizar la comunicación con el brazo robótico, IRB120 de ABB, a través de la herramienta de software matemático Matlab. Para ello desarrollaremos un socket de comunicación, que se encargará enviar y procesar los datos. Para comprobar que la comunicación funciona y que el envío de datos se realiza correctamente, se implementarán en Matlab, una serie de interfaces de comunicación con el robot y una aplicación final. La primera, será una interfaz gráfica r...

  11. Problem-based learning in communication systems using MATLAB and Simulink

    CERN Document Server

    Choi, Kwonhue

    2016-01-01

    Designed to help teach and understand communication systems using a classroom-tested, active learning approach. This book covers the basic concepts of signals, and analog and digital communications, to more complex simulations in communication systems. Problem-Based Learning in Communication Systems Using MATLAB and Simulink begins by introducing MATLAB and Simulink to prepare readers who are unfamiliar with these environments in order to tackle projects and exercises included in this book. Discussions on simulation of signals, filter design, sampling and reconstruction, and analog communications are covered next. The book concludes by covering advanced topics such as Viterbi decoding, OFDM and MIMO. In addition, this book contains examples of how to convert waveforms, constructed in simulation, into electric signals. It also includes problems illustrating how to complete actual wireless communications in the band near ultrasonic frequencies. A content-m pping table is included in this book to help instruc...

  12. Wind Turbine Blockset in Matlab/Simulink - General overview and description of the models

    Energy Technology Data Exchange (ETDEWEB)

    Iov, F.; Hansen, A.D.; Soerensen, P.; Blaabjerg, F.

    2004-03-01

    This report presents a new developed Matlab/Simulink Toolbox for wind turbine applications. This toolbox has been developed during the research project 'Simulation Platform to model, optimize and design wind turbines' and it has been used as a general developer tool for other three simulation tools: Saber, DIgSILENT, HAWC. The report provides first a quick overview over Matlab issues and then explains the structure of the developed toolbox. The attention in the report is mainly drawn to the description of the most important mathematical models, which have been developed in the Toolbox. Then, some simulation results using the developed models are shown. Finally, some general conclusions regarding this new developed Toolbox as well as some directions for future work are made. (au)

  13. STOCHSIMGPU: parallel stochastic simulation for the Systems Biology Toolbox 2 for MATLAB

    KAUST Repository

    Klingbeil, G.

    2011-02-25

    Motivation: The importance of stochasticity in biological systems is becoming increasingly recognized and the computational cost of biologically realistic stochastic simulations urgently requires development of efficient software. We present a new software tool STOCHSIMGPU that exploits graphics processing units (GPUs) for parallel stochastic simulations of biological/chemical reaction systems and show that significant gains in efficiency can be made. It is integrated into MATLAB and works with the Systems Biology Toolbox 2 (SBTOOLBOX2) for MATLAB. Results: The GPU-based parallel implementation of the Gillespie stochastic simulation algorithm (SSA), the logarithmic direct method (LDM) and the next reaction method (NRM) is approximately 85 times faster than the sequential implementation of the NRM on a central processing unit (CPU). Using our software does not require any changes to the user\\'s models, since it acts as a direct replacement of the stochastic simulation software of the SBTOOLBOX2. © The Author 2011. Published by Oxford University Press. All rights reserved.

  14. OXSA: An open-source magnetic resonance spectroscopy analysis toolbox in MATLAB.

    Directory of Open Access Journals (Sweden)

    Lucian A B Purvis

    Full Text Available In vivo magnetic resonance spectroscopy provides insight into metabolism in the human body. New acquisition protocols are often proposed to improve the quality or efficiency of data collection. Processing pipelines must also be developed to use these data optimally. Current fitting software is either targeted at general spectroscopy fitting, or for specific protocols. We therefore introduce the MATLAB-based OXford Spectroscopy Analysis (OXSA toolbox to allow researchers to rapidly develop their own customised processing pipelines. The toolbox aims to simplify development by: being easy to install and use; seamlessly importing Siemens Digital Imaging and Communications in Medicine (DICOM standard data; allowing visualisation of spectroscopy data; offering a robust fitting routine; flexibly specifying prior knowledge when fitting; and allowing batch processing of spectra. This article demonstrates how each of these criteria have been fulfilled, and gives technical details about the implementation in MATLAB. The code is freely available to download from https://github.com/oxsatoolbox/oxsa.

  15. Optimization of Grillages Using Genetic Algorithms for Integrating Matlab and Fortran Environments

    Directory of Open Access Journals (Sweden)

    Darius Mačiūnas

    2013-02-01

    Full Text Available The purpose of the paper is to present technology applied for the global optimization of grillage-type pile foundations (further grillages. The goal of optimization is to obtain the optimal layout of pile placement in the grillages. The problem can be categorized as a topology optimization problem. The objective function is comprised of maximum reactive force emerging in a pile. The reactive force is minimized during the procedure of optimization during which variables enclose the positions of piles beneath connecting beams. Reactive forces in all piles are computed utilizing an original algorithm implemented in the Fortran programming language. The algorithm is integrated into the MatLab environment where the optimization procedure is executed utilizing a genetic algorithm. The article also describes technology enabling the integration of MatLab and Fortran environments. The authors seek to evaluate the quality of a solution to the problem analyzing experimental results obtained applying the proposed technology.

  16. MATLAB for laser speckle contrast analysis (LASCA): a practice-based approach

    Science.gov (United States)

    Postnikov, Eugene B.; Tsoy, Maria O.; Postnov, Dmitry E.

    2018-04-01

    Laser Speckle Contrast Analysis (LASCA) is one of the most powerful modern methods for revealing blood dynamics. The experimental design and theory for this method are well established, and the computational recipie is often regarded to be trivial. However, the achieved performance and spatial resolution may considerable differ for different implementations. We comprise a minireview of known approaches to the spatial laser speckle contrast data processing and their realization in MATLAB code providing an explicit correspondence to the mathematical representation, a discussion of available implementations. We also present the algorithm based on the 2D Haar wavelet transform, also supplied with the program code. This new method provides an opportunity to introduce horizontal, vertical and diagonal speckle contrasts; it may be used for processing highly anisotropic images of vascular trees. We provide the comparative analysis of the accuracy of vascular pattern detection and the processing times with a special attention to details of the used MATLAB procedures.

  17. A computerized glow curve analysis (GCA) method for WinREMS thermoluminescent dosimeter data using MATLAB

    International Nuclear Information System (INIS)

    Harvey, John A.; Rodrigues, Miesher L.; Kearfott, Kimberlee J.

    2011-01-01

    A computerized glow curve analysis (GCA) program for handling of thermoluminescence data originating from WinREMS is presented. The MATLAB program fits the glow peaks using the first-order kinetics model. Tested materials are LiF:Mg,Ti, CaF 2 :Dy, CaF 2 :Tm, CaF 2 :Mn, LiF:Mg,Cu,P, and CaSO 4 :Dy, with most having an average figure of merit (FOM) of 1.3% or less, with CaSO 4 :Dy 2.2% or less. Output is a list of fit parameters, peak areas, and graphs for each fit, evaluating each glow curve in 1.5 s or less. - Highlights: → Robust algorithm for performing thermoluminescent dosimeter glow curve analysis. → Written in MATLAB so readily implemented on variety of computers. → Usage of figure of merit demonstrated for six different materials.

  18. Numerical methods in finance and economics a MATLAB-based introduction

    CERN Document Server

    Brandimarte, Paolo

    2006-01-01

    A state-of-the-art introduction to the powerful mathematical and statistical tools used in the field of financeThe use of mathematical models and numerical techniques is a practice employed by a growing number of applied mathematicians working on applications in finance. Reflecting this development, Numerical Methods in Finance and Economics: A MATLAB?-Based Introduction, Second Edition bridges the gap between financial theory and computational practice while showing readers how to utilize MATLAB?--the powerful numerical computing environment--for financial applications.The author provides an essential foundation in finance and numerical analysis in addition to background material for students from both engineering and economics perspectives. A wide range of topics is covered, including standard numerical analysis methods, Monte Carlo methods to simulate systems affected by significant uncertainty, and optimization methods to find an optimal set of decisions.Among this book''s most outstanding features is the...

  19. Radial basis function (RBF) neural network control for mechanical systems design, analysis and Matlab simulation

    CERN Document Server

    Liu, Jinkun

    2013-01-01

    Radial Basis Function (RBF) Neural Network Control for Mechanical Systems is motivated by the need for systematic design approaches to stable adaptive control system design using neural network approximation-based techniques. The main objectives of the book are to introduce the concrete design methods and MATLAB simulation of stable adaptive RBF neural control strategies. In this book, a broad range of implementable neural network control design methods for mechanical systems are presented, such as robot manipulators, inverted pendulums, single link flexible joint robots, motors, etc. Advanced neural network controller design methods and their stability analysis are explored. The book provides readers with the fundamentals of neural network control system design.   This book is intended for the researchers in the fields of neural adaptive control, mechanical systems, Matlab simulation, engineering design, robotics and automation. Jinkun Liu is a professor at Beijing University of Aeronautics and Astronauti...

  20. The Application of PSIM & Matlab/ Simulink in Teaching of Power Electronics Courses

    Directory of Open Access Journals (Sweden)

    Sameer Hanna Khader

    2011-07-01

    Full Text Available This paper presents a comparison analysis between two engineering software platforms, Matlab/Simulink & PSIM, which are used as major educational tools in teaching of power electronics and electrical drive courses, in additional to conducted research in these fields. The comparison analysis is based on studying the design simplicity of the module, time consumed in building of the module, accuracy, functionality, simulation time, and the acceptability of obtained results. Various power electronic simulation circuits are illustrated and the results are processed and displayed. The simulation results states that Matlab/Simulink is a suitable platform for control and regulation of simulation processes, in additional to its dominant role in conducting research tasks. Conversely, PSIM is dedicated to power electronic circuits and machine simulation tasks with fast and robust algorithms and suitable for educational purposes. It is recommended that both packages can be used in teaching power electronics courses.