WorldWideScience

Sample records for materials total listing

  1. Energy Materials: A Classified Listing

    Science.gov (United States)

    Library Journal, 1978

    1978-01-01

    This bibliography includes 615 books and audiovisual products on energy and related topics. Books are listed in the following categories: reference, general, alternative sources, citizen action, coal, conservation and ecology, economics and politics, electricity, gas, geothermal, nuclear power, oil, solar, water, wind, and juveniles. A/V materials…

  2. List of Nuclear Materials Licensing Actions Received

    Data.gov (United States)

    Nuclear Regulatory Commission — A catalog of all Materials Licensing Actions received for review. The catalog lists the name of the entity submitting the license application, their city and state,...

  3. Radioactive waste - a select list of material

    International Nuclear Information System (INIS)

    Lambert, C.M.

    1982-01-01

    A chronological bibliography is presented of literature relating to radioactive waste management in the United Kingdom concentrating on material published since 1978. The main sections include Dept. of Environ. and Official publications, administrative and environmental concerns, technological and scientific considerations, including publications on geological aspects, deep-sea bed and ocean-dumping and salt domes, with general background material and further sources of information listed at the end. (U.K.)

  4. Updated candidate list for engineered barrier materials

    International Nuclear Information System (INIS)

    McCright, R.D.

    1995-10-01

    This report describes candidate materials to be evaluated over the next several years during advanced design phases for the waste package to be used for the underground disposal of high-level radioactive wastes at the Yucca Mountain facility

  5. Material Science in Cervical Total Disc Replacement

    Science.gov (United States)

    Pham, Martin H.; Mehta, Vivek A.; Tuchman, Alexander; Hsieh, Patrick C.

    2015-01-01

    Current cervical total disc replacement (TDR) designs incorporate a variety of different biomaterials including polyethylene, stainless steel, titanium (Ti), and cobalt-chrome (CoCr). These materials are most important in their utilization as bearing surfaces which allow for articular motion at the disc space. Long-term biological effects of implanted materials include wear debris, host inflammatory immune reactions, and osteolysis resulting in implant failure. We review here the most common materials used in cervical TDR prosthetic devices, examine their bearing surfaces, describe the construction of the seven current cervical TDR devices that are approved for use in the United States, and discuss known adverse biological effects associated with long-term implantation of these materials. It is important to appreciate and understand the variety of biomaterials available in the design and construction of these prosthetics and the considerations which guide their implementation. PMID:26523281

  6. Material Science in Cervical Total Disc Replacement

    Directory of Open Access Journals (Sweden)

    Martin H. Pham

    2015-01-01

    Full Text Available Current cervical total disc replacement (TDR designs incorporate a variety of different biomaterials including polyethylene, stainless steel, titanium (Ti, and cobalt-chrome (CoCr. These materials are most important in their utilization as bearing surfaces which allow for articular motion at the disc space. Long-term biological effects of implanted materials include wear debris, host inflammatory immune reactions, and osteolysis resulting in implant failure. We review here the most common materials used in cervical TDR prosthetic devices, examine their bearing surfaces, describe the construction of the seven current cervical TDR devices that are approved for use in the United States, and discuss known adverse biological effects associated with long-term implantation of these materials. It is important to appreciate and understand the variety of biomaterials available in the design and construction of these prosthetics and the considerations which guide their implementation.

  7. Material Science in Cervical Total Disc Replacement.

    Science.gov (United States)

    Pham, Martin H; Mehta, Vivek A; Tuchman, Alexander; Hsieh, Patrick C

    2015-01-01

    Current cervical total disc replacement (TDR) designs incorporate a variety of different biomaterials including polyethylene, stainless steel, titanium (Ti), and cobalt-chrome (CoCr). These materials are most important in their utilization as bearing surfaces which allow for articular motion at the disc space. Long-term biological effects of implanted materials include wear debris, host inflammatory immune reactions, and osteolysis resulting in implant failure. We review here the most common materials used in cervical TDR prosthetic devices, examine their bearing surfaces, describe the construction of the seven current cervical TDR devices that are approved for use in the United States, and discuss known adverse biological effects associated with long-term implantation of these materials. It is important to appreciate and understand the variety of biomaterials available in the design and construction of these prosthetics and the considerations which guide their implementation.

  8. Total scattering of disordered crystalline functional materials

    International Nuclear Information System (INIS)

    Shamoto, Shin-Ichi; Kodama, Katsuaki; Iikubo, Satoshi; Taguchi, Tomitsugu

    2009-01-01

    There are disorders in some modern functional materials. As an example, the crystalline phase of an optical recording material has low thermal conductivity but high electrical conductivity, simultaneously. This contradiction is a challenge to material scientists in designing good functional materials, which should have at least two types of crystallographic sites. One site limits thermal conductivity while the other site carries electrons or holes with high mobility. This problem exists with not only optical recording materials but also thermoelectric materials. The periodic boundary condition gets lost in the disordered parts. This therefore, makes atomic pair distribution function (PDF) analysis with a wide range of real space suitable for investigating the form and size of crystalline parts as well as disordered parts in the material. Pulsed neutron powder diffraction is one of the best tools for use in this new type of emerging research, together with synchrotron X-ray powder diffraction and electron diffraction.

  9. The relationship between debt levels and total shareholder return of JSE-listed platinum companies

    Directory of Open Access Journals (Sweden)

    Sandra Jooste

    2016-02-01

    Full Text Available The purpose of this study is to investigate empirically whether there is a positive correlation between debt levels and total shareholder return (TSR of platinum JSE-listed companies. The study field comprised annual analyses for 12 companies listed under the Platinum and Precious Metals sector on the JSE Ltd for the 14-year period 2000 to 2013. The results of the study were inconclusive as a statistically significant positive correlation between changes in debt levels and changes in TSR could only be found in two of these years. The core audience of the study will be the management of South African platinum companies considering changes in their capital structure, and investors considering investment in a listed platinum company. The contribution of the study is therefore to add to the body of literature on capital structure decisions from a South African platinum mine context

  10. Listings.

    Science.gov (United States)

    1994-12-07

    Nursing Standard regrets that it is no longer able to take listings over the telephone because of unprecedented demand. Readers are reminded that the listings section is for the use of charitable and professional organisations, unions and health authorities to publicise forthcoming events. Listings should contain all relevant details and be posted or faxed to Susan Blood-worth, Nursing Standard, Viking House, 17-19 Peterborough Road, Harrotc. Middlesex HA 1 2AX. Fax: 081-423 3867.

  11. Free recall of word lists under total sleep deprivation and after recovery sleep.

    Science.gov (United States)

    de Almeida Valverde Zanini, Gislaine; Tufik, Sérgio; Andersen, Monica Levy; da Silva, Raquel Cristina Martins; Bueno, Orlando Francisco Amodeo; Rodrigues, Camila Cruz; Pompéia, Sabine

    2012-02-01

    One task that has been used to assess memory effects of prior total sleep deprivation (TSD) is the immediate free recall of word lists; however, results have been mixed. A possible explanation for this is task impurity, since recall of words from different serial positions reflects use of distinct types of memory (last words: short-term memory; first and intermediate words: episodic memory). Here we studied the effects of 2 nights of TSD on immediate free recall of semantically unrelated word lists considering the serial position curve. Random allocation to a 2-night TSD protocol followed by one night of recovery sleep or to a control group. Study conducted under continuous behavioral monitoring. 24 young, healthy male volunteers. 2 nights of total sleep deprivation (TSD) and one night of recovery sleep. Participants were shown five 15 unrelated word-lists at baseline, after one and 2 nights of TSD, and after one night of recovery sleep. We also investigated the development of recall strategies (learning) and susceptibility to interference from previous lists. No free recall impairment occurred during TSD, irrespective of serial position. Interference was unchanged. Both groups developed recall strategies, but task learning occurred earlier in controls and was evident in the TSD group only after sleep recovery. Prior TSD spared episodic memory, short-term phonological memory, and interference, allowed the development of recall strategies, but may have decreased the advantage of using these strategies, which returned to normal after recovery sleep.

  12. Total Scattering Analysis of Disordered Nanosheet Materials

    Science.gov (United States)

    Metz, Peter C.

    Two dimensional materials are of increasing interest as building blocks for functional coatings, catalysts, and electrochemical devices. While increasingly sophisticated processing routes have been designed to obtain high-quality exfoliated nanosheets and controlled, self-assembled mesostructures, structural characterization of these materials remains challenging. This work presents a novel method of analyzing pair distribution function (PDF) data for disordered nanosheet ensembles, where supercell stacking models are used to infer atom correlations over as much as 50 A. Hierarchical models are used to reduce the parameter space of the refined model and help eliminate strongly correlated parameters. Three data sets for restacked nanosheet assemblies with stacking disorder are analyzed using these methods: simulated data for graphene-like layers, experimental data for 1 nm thick perovskite layers, and experimental data for highly defective delta-MnO2 layers. In each case, the sensitivity of the PDF to the real-space distribution of layer positions is demonstrated by exploring the fit residual as a function of stacking vectors. The refined models demonstrate that nanosheets tend towards local interlayer ordering, which is hypothesized to be driven by the electrostatic potential of the layer surfaces. Correctly accounting for interlayer atom correlations permits more accurate refinement of local structural details including local structure perturbations and defect site occupancies. In the delta-MnO2 nanosheet material, the new modeling approach identified 14% Mn vacancies while application of 3D periodic crystalline models to the < 7 A PDF region suggests a 25% vacancy concentration. In contrast, the perovskite nanosheet material is demonstrated to exhibit almost negligible structural relaxation in contrast with the bulk crystalline material from which it is derived.

  13. Development of a comprehensive list of criteria for evaluating consumer education materials on colorectal cancer screening.

    Science.gov (United States)

    Dreier, Maren; Borutta, Birgit; Seidel, Gabriele; Kreusel, Inga; Töppich, Jürgen; Bitzer, Eva M; Dierks, Marie-Luise; Walter, Ulla

    2013-09-13

    Appropriate patient information materials may support the consumer's decision to attend or not to attend colorectal cancer (CRC) screening tests (fecal occult blood test and screening colonoscopy). The aim of this study was to develop a list of criteria to assess whether written health information materials on CRC screening provide balanced, unbiased, quantified, understandable, and evidence-based health information (EBHI) about CRC and CRC screening. The list of criteria was developed based on recommendations and assessment tools for health information in the following steps: (1) Systematic literature search in 13 electronic databases (search period: 2000-2010) and completed by an Internet search (2) Extraction of identified criteria (3) Grouping of criteria into categories and domains (4) Compilation of a manual of adequate answers derived from systematic reviews and S3 guidelines (5) Review by external experts (6) Modification (7) Final discussion with external experts. Thirty-one publications on health information tools and recommendations were identified. The final list of criteria includes a total of 230 single criteria in three generic domains (formal issues, presentation and understandability, and neutrality and balance) and one CRC-specific domain. A multi-dimensional rating approach was used whenever appropriate (e.g., rating for the presence, correctness, presentation and level of evidence of information). Free text input was allowed to ensure the transparency of assessment. The answer manual proved to be essential to the rating process. Quantitative analyses can be made depending on the level and dimensions of criteria. This comprehensive list of criteria clearly has a wider range of evaluation than previous assessment tools. It is not intended as a final quality assessment tool, but as a first step toward thorough evaluation of specific information materials for their adherence to EBHI requirements. This criteria list may also be used to revise

  14. A list of websites and reading materials on strategy & complexity

    OpenAIRE

    Wigboldus, S.A.

    2009-01-01

    The list has been developed based on a broad interpretation of the subject of ‘strategy & complexity’. Resources will therefore more, or less directly relate to ‘being strategic in the face of complexity’. Many of the articles and reports referred to in the attached bibliography can be accessed and downloaded from the internet. Most books can be found at amazon.com where you will often find a number of book reviews and summaries as well. Sometimes, reading the reviews will suffice and wil...

  15. Development of total medical material distribution management system.

    Science.gov (United States)

    Uto, Y; Kumamoto, I

    1994-07-01

    Since September 1992, attempts have been made at Kagoshima University Hospital to develop the Medical Material Distribution Management System which helps to realize optimal hospital management as a subsystem of the Total Hospital Information System of Kagoshima University (THINK). As this system has been established, it has become possible for us to have an accurate grasp of the flow and stock of medical materials at our hospital. Furthermore, since September 1993, the Medical Material Distribution Management System has been improved and the Total Medical Material Distribution Management System has been smoothly introduced into the site of clinical practice. This system enables automatic demands for fees for treatment with specific instruments and materials covered by health insurance. It was difficult to predict the effect of this system, because no similar system had been developed in Japan. However, more satisfactory results than expected have been obtained since its introduction.

  16. Youth Solid Waste Educational Materials List, November 1991.

    Science.gov (United States)

    Cornell Univ., Ithaca, NY. Cooperative Extension Service.

    This guide provides a brief description and ordering information for approximately 300 educational materials for grades K-12 on the subject of solid waste. The materials cover a variety of environmental issues and actions related to solid waste management. Entries are divided into five sections including audiovisual programs, books, magazines,…

  17. A Description and Source Listing of Curriculum Materials in Agricultural Education. 1972-73.

    Science.gov (United States)

    American Vocational Association, Washington, DC. Agricultural Education Div.

    Listed are 246 curriculum material items in ten categories: field crops, horticulture, forestry, animal science, soils, diseases and pests, agricultural engineering, agricultural economics, agricultural occupations, and professional. Most materials are annotated and all are classified according to the AGPEX filing system. Bibliographic and…

  18. 7 CFR 330.210a - Administrative instructions listing approved packing materials for plant pests.

    Science.gov (United States)

    2010-01-01

    ... materials for plant pests. 330.210a Section 330.210a Agriculture Regulations of the Department of... PEST REGULATIONS; GENERAL; PLANT PESTS; SOIL, STONE, AND QUARRY PRODUCTS; GARBAGE Movement of Plant Pests § 330.210a Administrative instructions listing approved packing materials for plant pests. (a) The...

  19. Financial recognition of material misstatement risks of listed companies on GEM

    OpenAIRE

    Jie Ming; Yicong Jiang

    2017-01-01

    Listed companies on GEM are characterized by strong innovation, great growth ability, high risks and high yields. Starting from these characteristics, this paper carries out analysis by using the financial indicators that are effective to recognize the material misstatement risks and easy to be acquired, and combines with the sample data with high material misstatement risks on GEM in 2012 to 2014 to test the significance of spss difference, and finds that the material misstatement company an...

  20. Total focusing method (TFM) robustness to material deviations

    Science.gov (United States)

    Painchaud-April, Guillaume; Badeau, Nicolas; Lepage, Benoit

    2018-04-01

    The total focusing method (TFM) is becoming an accepted nondestructive evaluation method for industrial inspection. What was a topic of discussion in the applied research community just a few years ago is now being deployed in critical industrial applications, such as inspecting welds in pipelines. However, the method's sensitivity to unexpected parametric changes (material and geometric) has not been rigorously assessed. In this article, we investigate the robustness of TFM in relation to unavoidable deviations from modeled nominal inspection component characteristics, such as sound velocities and uncertainties about the parts' internal and external diameters. We also review TFM's impact on the standard inspection modes often encountered in industrial inspections, and we present a theoretical model supported by empirical observations to illustrate the discussion.

  1. THE FEDERAL LIST OF EXTREMIST MATERIALS AS A CULTURAL ARTEFACT “FAN-FICTION”

    Directory of Open Access Journals (Sweden)

    E. V. Salnikov

    2017-01-01

    Full Text Available The article suggests the analysis of problem of counteraction to distribution of extremist materials. According to the author, a strictly legal interpretation of the Federal list of extremist materials ignores the problem of the nature of extremist materials and the question of the applicability of this concept. As a result extremist materials can be understood as phantom, determined by fight the power with its political opponents. Overcoming this negative interpretation is possible through the interpretation of extremist materials in the context of the practices of the prohibition of texts that took place in society at different historical stages. Qualitative difference of extremist materials from other forms of censorship sets a postmodern culture in which there is a transformation of the concept of the author of the text up until his disappearance. This is the epitome of cultures fan-fiction – free community of persons who in their literary works – fanfiction – develop, modify or refine some of the original idea, embodied in a book, film, computer game. The author offers the interpretation of extremist materials as of fanfics object, where the list of extremist materials sets the boundaries of the field of extremist ideas, acting as a marker of the space limitation of the creative generation of information in the world of mass culture.

  2. Financial recognition of material misstatement risks of listed companies on GEM

    Directory of Open Access Journals (Sweden)

    Jie Ming

    2017-11-01

    Full Text Available Listed companies on GEM are characterized by strong innovation, great growth ability, high risks and high yields. Starting from these characteristics, this paper carries out analysis by using the financial indicators that are effective to recognize the material misstatement risks and easy to be acquired, and combines with the sample data with high material misstatement risks on GEM in 2012 to 2014 to test the significance of spss difference, and finds that the material misstatement company and the normal company have significant difference in the profitability, solvency, growth ability and cash flow.

  3. Priority listing of industrial processes by total energy consumption and potential for savings. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Streb, A.J.

    1977-01-01

    A survey of eight of the most energy-intensive segments of the U.S. industry is made to quantify the energy consumed in the principal process units, to identify areas in which significant improvement appear possible, and to rank the process units in terms of total energy consumption and the potential for improvement. Data on the steel, paper, aluminum, textile, cement, and glass industries, petroleum refineries, and olefins and derivative products industries were compiled to help plan the development of new energy sources and to provide targets for energy conservation activities. (MCW)

  4. Alternative materials to improve total hip replacement tribology.

    Science.gov (United States)

    Santavirta, Seppo; Böhler, Max; Harris, William H; Konttinen, Yrjö T; Lappalainen, Reijo; Muratoglu, Orhun; Rieker, Claude; Salzer, Martin

    2003-08-01

    An improvement in tribology of bearing surfaces is an effective means of increasing the longevity of total hip replacement (THR). Currently, 3 approaches are available to achieve this aim: first, use of highly cross-linked UHMWPE; second, aluminum oxide ceramic bearings, and third, metal-on-metal bearings. Cross-linking reduces the wear resistance of UHMWPE markedly without impairment of other significant properties of the material. Simulator studies and some clinical long-term (10-22 years) follow-up surveys suggest an almost immeasurable wear of the highly cross-linked UHMWPE-based acetabular components during an expected clinical life span. Bioinert alumina ceramic (aluminum oxide) was introduced 3 decades ago for THR-bearing surfaces to improve performance and longevity. Alumina ceramic is entirely biostable and bioinert and has good mechanical properties. For correctly positioned alumina-on-alumina bearings, the annual linear wear rate has been reported to be 3.9 microm. Alumina heads have been successfully used in combination with polyethylene sockets, but as regards wear, the best results have been obtained with alumina-on-alumina bearings. In ceramic THR bearings, precise manufacture and contact surface geometry, including optimal clearance, are most important. For the currently available products, the component fracture risk is almost nonexistent (less than 1 per 1000). Metal-on-metal bearings were used in the early stage of THR surgery, although not all old designs were successful. More recent analyses of the early series have shown the advantages of metal-on-metal to be better and have led to a renaissance of this articulation. Initially, stainless steel was used because it was easy to manufacture and polish. Current metal-on-metal bearings are based on cobalt-chromium-molybdenum alloys with varying carbon contents. Such bearings are self-polishing. Linear wear rates remain at the level of a few microm a year. An improvement in technology has increased

  5. MAK and BAT values list 2014. Maximum permissible concentrations at the place of work and biological tolerance values for working materials; MAK- und BAT-Werte-Liste 2014. Maximale Arbeitsplatzkonzentrationen und Biologische Arbeitsstofftoleranzwerte

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-11-01

    The book on the MAK (maximum permissible concentrations at the place of work) and BAT (biological tolerance values for working materials) value list 2014 includes the following chapters: (a) Maximum permissible concentrations at the place of work: definition, application and determination of MAT values, list of materials; carcinogenic working materials, sensibilizing working materials, aerosols, limiting the exposition peaks, skin resorption, MAK values during pregnancy, germ cell mutagens, specific working materials; (b) Biological tolerance values for working materials: definition and application of BAT values, list of materials, carcinogenic working materials, biological guide values, biological working material reference values.

  6. MAK and BAT values list 2013. Maximum permissible concentrations at the place of work and biological tolerance values for working materials; MAK- und BAT-Werte-Liste 2013. Maximale Arbeitsplatzkonzentrationen und Biologische Arbeitsstofftoleranzwerte

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-01

    The book on the MAK (maximum permissible concentrations at the place of work) and BAT (biological tolerance values for working materials) value list 2013 includes the following chapters: (a) Maximum permissible concentrations at the place of work: definition, application and determination of MAT values, list of materials; carcinogenic working materials, sensibilizing working materials, aerosols, limiting the exposition peaks, skin resorption, MAK values during pregnancy, germ cell mutagens, specific working materials; (b) Biological tolerance values for working materials: definition and application of BAT values, list of materials, carcinogenic working materials, biological guide values, biological working material reference values.

  7. MAK and BAT values list 2015. Maximum permissible concentrations at the place of work and biological tolerance values for working materials; MAK- und BAT-Werte-Liste 2015. Maximale Arbeitsplatzkonzentrationen und Biologische Arbeitsstofftoleranzwerte

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2015-11-01

    The book on the MAK (maximum permissible concentrations at the place of work) and BAT (biological tolerance values for working materials) value list 2015 includes the following chapters: (a) Maximum permissible concentrations at the place of work: definition, application and determination of MAT values, list of materials; carcinogenic working materials, sensibilizing working materials, aerosols, limiting the exposition peaks, skin resorption, MAK values during pregnancy, germ cell mutagens, specific working materials; (b) Biological tolerance values for working materials: definition and application of BAT values, list of materials, carcinogenic working materials, biological guide values, biological working material reference values.

  8. Solid Waste Management Available Information Materials. Total Listing 1966-1976.

    Science.gov (United States)

    Larsen, Julie L.

    This publication is a compiled and indexed bibliography of solid waste management documents produced in the last ten years. This U.S. Environmental Protection Agency (EPA) publication is compiled from the Office of Solid Waste Management Programs (OSWMP) publications and the National Technical Information Service (NTIS) reports. Included are…

  9. TRUPACT-II Content Codes (TRUCON), Revision 8 and list of chemicals and materials in TRUCON (chemical list), Revision 7

    International Nuclear Information System (INIS)

    1996-03-01

    The Transuranic Package Transporter (TRUPACT-II) Content Codes document (TRUCON) represents the development of a new content code system for shipping contact handled transuranic (CH-TRU) waste in TRUPACT-II. It will be used to convert existing waste forms, content codes, and any other identification codes into a system that is uniform throughout for all the Department of Energy (DOE) sites. These various codes can be grouped under the newly formed shipping content codes without any loss of waste characterization information. The TRUCON document provides a parametric description for each content code for waste generated and compiles this information for all ten DOE sites. Compliance with waste generation, processing and certification procedures at the sites (outlined in the TRUCON document for each content code) ensures that prohibited waste forms are not present in the waste. The content code essentially gives a description of the CH-TRU waste material in terms of processes and packaging, and the generation location. This helps to provide cradle-to-grave traceability of the waste material so that the various actions required to assess its qualification as payload for the TRUPACT-II package can be performed

  10. MAK and BAT values list 2014. Maximum permissible concentrations at the place of work and biological tolerance values for working materials

    International Nuclear Information System (INIS)

    2014-01-01

    The book on the MAK (maximum permissible concentrations at the place of work) and BAT (biological tolerance values for working materials) value list 2014 includes the following chapters: (a) Maximum permissible concentrations at the place of work: definition, application and determination of MAT values, list of materials; carcinogenic working materials, sensibilizing working materials, aerosols, limiting the exposition peaks, skin resorption, MAK values during pregnancy, germ cell mutagens, specific working materials; (b) Biological tolerance values for working materials: definition and application of BAT values, list of materials, carcinogenic working materials, biological guide values, biological working material reference values.

  11. MAK and BAT values list 2015. Maximum permissible concentrations at the place of work and biological tolerance values for working materials

    International Nuclear Information System (INIS)

    2015-01-01

    The book on the MAK (maximum permissible concentrations at the place of work) and BAT (biological tolerance values for working materials) value list 2015 includes the following chapters: (a) Maximum permissible concentrations at the place of work: definition, application and determination of MAT values, list of materials; carcinogenic working materials, sensibilizing working materials, aerosols, limiting the exposition peaks, skin resorption, MAK values during pregnancy, germ cell mutagens, specific working materials; (b) Biological tolerance values for working materials: definition and application of BAT values, list of materials, carcinogenic working materials, biological guide values, biological working material reference values.

  12. MAK and BAT values list 2017. Maximum permissible concentrations at the place of work and biological tolerance values for working materials; MAK- und BAT-Werte-Liste 2017. Maximale Arbeitsplatzkonzentrationen und Biologische Arbeitsstofftoleranzwerte

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2017-08-01

    The MAK and BAT values list 2017 includes the maximum permissible concentrations at the place of work and biological tolerance values for working materials. The following working materials are covered: carcinogenic working materials, sensitizing materials and aerosols. The report discusses the restriction of exposure peaks, skin resorption, MAK (maximum working place concentration) values during pregnancy, germ cell mutagens and specific working materials. Importance and application of BAT (biological working material tolerance) values, list of materials, carcinogens, biological guide values and reference values are also included.

  13. Structure analysis of liquids and disordered materials using pulsed neutron diffraction and total scattering

    International Nuclear Information System (INIS)

    Suzuya, Kentaro

    2011-01-01

    Neutron diffraction·total scattering at pulsed neutron source is a powerful method to analyze the complex structure of disordered materials: liquids, glasses, amorphous materials and disordered crystals. The basic idea of the structure of disordered materials, the fundamental diffraction theory for disordered materials, and structure analysis of disordered materials using pulsed neutron diffraction·total scattering technique (TOF method) are described in detail. In addition, the precise information of the world highest class J-PARC MLF spallation neutron source and typical J-PARC neutron total scattering instrument NOVA are also given. Recent structural modelling methods of disordered materials such like reverse Monte Carlo (RMC) simulation method is briefly described using an example of the analysis of a typical disordered material silica glass. (author)

  14. Assessment of total polar materials in Frying fats from Czech restaurants

    Directory of Open Access Journals (Sweden)

    J. Mlcek

    2015-06-01

    Full Text Available Deep-frying is commonly used as convenient technique for the preparation of foods. The frying oils and fats are absorbed by fried food and become a part of diet. The content of total polar materials was determined in frying oils and fats in 46 restaurants from South Moravia and the Olomouc regions. Twenty-eight samples were found with total polar materials with limit of rejection over 24%. The highest total polar materials values were observed in cooking fat; the lowest one was in vegetable shortening oil. This conclusion corresponds with frying temperatures, which were highest in cooking fat.

  15. Total scattering investigation of materials for clean energy applications: the importance of the local structure.

    Science.gov (United States)

    Malavasi, Lorenzo

    2011-04-21

    In this Perspective article we give an account of the application of total scattering methods and pair distribution function (PDF) analysis to the investigation of materials for clean energy applications such as materials for solid oxide fuel cells and lithium batteries, in order to show the power of this technique in providing new insights into the structure-property correlation in this class of materials.

  16. Total gamma activity measurements for determining the radioactivity of residual materials from nuclear power stations

    International Nuclear Information System (INIS)

    Auler, I.; Meyer, M.; Stickelmann, J.

    1995-01-01

    Large amounts of residual materials from retrofitting measures and from decommissioning of nuclear power stations shows such a weak level of radioactivity that they could be released after decision measurements. Expenses incurred with complex geometry cannot be taken with common methods. NIS developed a Release Measurement Facility (RMF) based on total gamma activity measurements especially for these kind of residual materials. The RMF has been applied for decision measurements in different nuclear power plants. Altogether about 2,000 Mg of various types of materials have been measured up to now. More than 90 % of these materials could be released 0 without any restriction after decision measurements

  17. MAK and BAT values list 2016. Maximum permissible concentrations at the place of work and biological tolerance values for working materials

    International Nuclear Information System (INIS)

    2016-01-01

    The MAK and BAT values list 2016 includes the maximum permissible concentrations at the place of work and biological tolerance values for working materials. The following working materials are covered: carcinogenic working materials, sensitizing materials and aerosols. The report discusses the restriction of exposure peaks, skin resorption, MAK (maximum working place concentration) values during pregnancy, germ cell mutagens and specific working materials. Importance and application of BAT (biological working material tolerance) values, list of materials, carcinogens, biological guide values and reference values are also included.

  18. MAK and BAT values list 2017. Maximum permissible concentrations at the place of work and biological tolerance values for working materials

    International Nuclear Information System (INIS)

    2017-01-01

    The MAK and BAT values list 2017 includes the maximum permissible concentrations at the place of work and biological tolerance values for working materials. The following working materials are covered: carcinogenic working materials, sensitizing materials and aerosols. The report discusses the restriction of exposure peaks, skin resorption, MAK (maximum working place concentration) values during pregnancy, germ cell mutagens and specific working materials. Importance and application of BAT (biological working material tolerance) values, list of materials, carcinogens, biological guide values and reference values are also included.

  19. A Description and Source Listing of Curriculum Materials in Agricultural Education, 1971-1972.

    Science.gov (United States)

    American Vocational Association, Washington, DC. Agricultural Education Div.

    Members of the Curriculum Materials Committee collect materials available to them prior to each American Vocational Association Meeting. The resulting bibliography contains current, non-commercial materials developed by persons in vocational education in agriculture for use in that field, but of interest beyond the state in which it was developed.…

  20. Patient with a total artificial heart maintained on outpatient dialysis while listed for combined organ transplant, a single center experience.

    Science.gov (United States)

    Hanna, Ramy M; Hasnain, Huma; Kamgar, Mohammad; Hanna, Mina; Minasian, Raffi; Wilson, James

    2017-10-01

    Advanced mechanical circulatory support is increasingly being used with more sophisticated devices that can deliver pulsatile rather than continuous flow. These devices are more portable as well, allowing patients to await cardiac transplantation in an outpatient setting. It is known that patients with renal failure are at increased risk for developing worsening acute kidney injury during implantation of a ventricular assist device (VAD) or more advanced modalities like a total artificial heart (TAH). Dealing with patients who have an implanted TAH who develop renal failure has been a challenge with the majority of such patients having to await a combined cardiac and renal transplant prior to transition to outpatient care. Protocols do exist for VAD implanted patients to be transitioned to outpatient dialysis care, but there are no reported cases of TAH patients with end stage renal disease (ESRD) being successfully transitioned to outpatient dialysis care. In this report, we identify a patient with a TAH and ESRD transitioned successfully to outpatient hemodialysis and maintained for more than 2 years, though he did not survive to transplant. It is hoped that this report will raise awareness of this possibility, and assist in the development of protocols for similar patients to be successfully transitioned to outpatient dialysis care. © 2017 International Society for Hemodialysis.

  1. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no 28. 1997 edition

    International Nuclear Information System (INIS)

    1997-01-01

    To assist Member States in implementing IAEA's Regulations for the Safe Transport of Radioactive Material and carrying out responsibility for compliance assurance, the IAEA maintains an updated list of national competent authorities designated for this purpose

  2. MAK- and BAT values list 2003. Maximum permissible concentrations at the place of work and biological tolerance values for working materials; MAK- und BAT-Werte-Liste 2003. Maximale Arbeitsplatzkonzentrationen und Biologische Arbeitsstofftoleranzwerte

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    The importance, application and derivation of the maximum concentrations at the workplace is explained. A material's list contains the presently valid maximum concentration values supplemented by a list of materials for which no such values were determined as yet. Furthermore there is a list of working materials clearly identified as carcinogenic, and of working materials with a sensitizing effect, aerosols and some specific working materials are discussed. Finally, the importance and the application of biological tolerance values is explained, supplemented by a materials list. (orig.) [German] In der vorliegenden neuesten Ausgabe werden erneut Bedeutung, Benutzung und Ableitung der MAK-Werte (maximale Arbeitsplatzkonzentrationen) erlaeutert. Eine Stoffliste enthaelt die derzeit gueltigen MAK-Werte, ergaenzt durch eine Aufzaehlung von Stoffen, fuer die noch keine MAK-Werte aufgestellt werden koennen. Es folgt eine Auflistung der Arbeitsstoffe, die bereits eindeutig als krebserregend ausgewiesen wurden, sowie der sensibilisierenden Arbeitsstoffe, Aerosole und einige besondere Arbeitsstoffe. Abschliessend wird die Bedeutung und Benutzung der BAT-Werte erlaeutert, ergaenzt durch eine Stoffliste. (orig.)

  3. Assessment of Corrosion, Fretting, and Material Loss of Retrieved Modular Total Knee Arthroplasties.

    Science.gov (United States)

    Martin, Audrey J; Seagers, Kirsten A; Van Citters, Douglas W

    2017-07-01

    Modular junctions in total hip arthroplasties have been associated with fretting, corrosion, and debris release. The purpose of this study is to analyze damage severity in total knee arthroplasties of a single design by qualitative visual assessment and quantitative material loss measurements to evaluate implant performance and patient impact via material loss. Twenty-two modular knee retrievals of the same manufacturer were identified from an institutional review board-approved database. Junction designs included tapers with an axial screw and tapers with a radial screw. Constructs consisted of 2 metal alloys: CoCr and Ti6Al4V. Components were qualitatively scored and quantitatively measured for corrosion and fretting. Negative values represent adhered material. Statistical differences were analyzed using sign tests. Correlations were tested with a Spearman rank order test (P corrosion than other components, suggesting preferential corrosion when interfacing with Ti6Al4V. Overall, although corrosion was noted in this series, material loss was low, and none were revised for clinical metal-related reaction. This suggests the clinical impact from corrosion in total knee arthroplasty is low. Copyright © 2017 Elsevier Inc. All rights reserved.

  4. A Description and Source Listing of Curriculum Materials in Agricultural Education, 1970-1971.

    Science.gov (United States)

    American Vocational Association, Washington, DC. Agricultural Education Div.

    To provide teachers of vocational agriculture, agricultural supervisors, and agricultural teacher educators with information on current curriculum materials available to them, this annotated bibliography presents 207 references classified according to the AGDEX filing system. Topics are: (1) Field Crops, (2) Horticulture, (3) Forestry, (4) Animal…

  5. A Description and Source Listing of Curriculum Materials in Agricultural Education, 1969-1970.

    Science.gov (United States)

    American Vocational Association, Washington, DC. Agricultural Education Div.

    The purpose of this annotated bibliography is to provide teachers of vocational agriculture, agricultural supervisors, and agricultural teacher educators with information on current curriculum materials available to them. Classified according to the AGDEX filing system, the 163 references are grouped under the headings: (1) Field Crops, (2)…

  6. Food sources of total omega 6 fatty acids (18:2 + 20:4), listed in descending order by percentages of their contribution to intake, based on data from the National Health and Nutrition Examination Survey 2005-2006

    Science.gov (United States)

    Food sources of total omega 6 fatty acids (18:2 + 20:4), listed in descending order by percentages of their contribution to intake, based on data from the National Health and Nutrition Examination Survey 2005-2006

  7. Anastomose cavo-pulmonar total sem uso de material protético

    Directory of Open Access Journals (Sweden)

    Valdester C. PINTO Jr.

    1998-07-01

    Full Text Available Objetivo: Demonstrar a viabilidade na feitura de túnel cava inferior-cava superior com retalho da parede atrial direita, evitando o emprego de material protético. Casuística e Métodos: Foram operados 2 pacientes nos quais se empregou a técnica de anastomose cavo-pulmonar total, sem uso de material protético. O primeiro caso, A.L.M., masc, 4 anos, 15 kg, era portador de atresia tricúspide (EP, com comunicação interventricular (CIV restritiva. O segundo caso, M.E.N.O., fem, 15 anos, 47 kg, tinha doença de Ebstein. O controle pós-operatório dos pacientes foi feito com ecocardiograma e cateterismo cardíaco. As operações foram realizadas com o emprego de circulação extracorpórea (CEC, e cardioplegia sangüínea como método de proteção miocárdica. A canulação das cavas foi o mais distal possível. A tunelização foi realizada com retalho de tecido atrial direito, suturado ao septo interatrial, deixando-se o seio coronariano e a comunicação interatrial (CIA para a esquerda. Resultados: Ambos os pacientes evoluíram, sem complicações, na UTI. O primeiro apresentou derrame pleural discreto à direita, e o segundo mantém-se em estimulação artificial (VVI,R. Conclusões: A tunelização intra-atrial para anastomose cavo-pulmonar total pode ser realizada sem o uso de material protético, evitando-se os riscos advindos do seu emprego (calcificação, retração, embolização.The authors describe two cases (one tricuspid atresia without TGA or pulmonary stenosis, but with a restrictive IVC: the second of an Ebstein disease of total cavo-pulmonary anastomosis using only the tissue of the atrial wall, avoiding any prosthetic material. Both cases were done under cardiopulmonary bypass and cold blood cardioplegia. A flap of the right atrial wall was used to re-direct the blood flow. Pleural effusion in one patient and complete AV block in the other were the complications found. They conclude that right intra-atrial tunneling for

  8. Listing the investment costs and producing material analyses for given plants for energy supply

    International Nuclear Information System (INIS)

    Wagner, H.J.; Hansen, K.; Schoen, R.; Wassmann, B.

    1989-01-01

    In this comparison, the investment and material cost for the following plants are examined: 1. Solar service water treatment plants, 2. Solar heating plants, 3. Conventional comparative plants, 4. Heat pump heating plants, 5. Nuclear power stations and hardcoal-fired power stations, and 6. Wind energy converters. The technique of energy conversion of each is generally explained. In the appendix, points of the use of energy are given for the manufacture of components of the heating and installation trade. Specific energy costs per product unit are compiled for the different branches. (UA) [de

  9. Windscale inquiry. A selected list of material based on the DOE/DTp library

    Energy Technology Data Exchange (ETDEWEB)

    Lambert, C M [comp.

    1981-01-01

    The nuclear debate, far from being concluded by the Windscale decision, was in fact opened up and its scope widened to take into account the political, international, environmental and social issues involved. This debate continues and the selection of literature presented here aims to illustrate all aspects of the Inquiry and its implications. The material is presented in two main sections. Section A is concerned with the Inquiry itself: the proceedings, the report and the government's decision. Section B presents a selection of the literature and debate that resulted.

  10. Effects of Material Properties on the Total Stored Energy of a Hybrid Flywheel Rotor

    Energy Technology Data Exchange (ETDEWEB)

    Ha, S.K.; Yoon, Y.B. [Hanyang University, Seoul (Korea); Han, S.C. [Korea Electric Power Research Institute, Taejon (Korea)

    2000-05-01

    A numerical method based on an assumption of a generalized plane strain (GPS) state is presented for calculating the stress and strength ratio distributions of the rotating composite flywheel rotor of varying material properties in the radial direction. The rotor is divided into many rings and each ring has constant material properties. All the rings are assumed to expand and have the same axial strain. A three-dimensional finite element method is then used to verify the accuracy of the present method for various height ratios and ply angles. This method gives a better solution for most of the rotors than other methods of a plane stress or plane strain state. After verification, the effects of material properties on the total stored energy (TSE) of the composite flywheel rotor are investigated. For this purpose, the material properties of the rotor, i.e., circumferential and radial Youngs moduli, ply angles and mass densities, are expressed by power functions of the radius and the rotor is analyzed. The analysis shows that TSE can be most effectively increased by changing the circumferential Youngs moduli along the radius, which amounts to over 300% of TSE of the constant material properties. The variation of ply angles along the radius can increase TSE by about 30% at most. The method of changing the mass densities along the radius could be also effective but its effects are not so noticeable in the rotor where the circumferential stiffness is properly arranged. (author). 24 refs., 7 figs.

  11. Evaluation of automated analysis of 15N and total N in plant material and soil

    DEFF Research Database (Denmark)

    Jensen, E.S.

    1991-01-01

    Simultaneous determination of N-15 and total N using an automated nitrogen analyser interfaced to a continuous-flow isotope ratio mass spectrometer (ANA-MS method) was evaluated. The coefficient of variation (CV) of repeated analyses of homogeneous standards and samples at natural abundance...... was lower than 0.1%. The CV of repeated analyses of N-15-labelled plant material and soil samples varied between 0.3% and 1.1%. The reproducibility of repeated total N analyses using the automated method was comparable to results obtained with a semi-micro Kjeldahl procedure. However, the automated method...... analysis showed that the recovery of inorganic N in the NH3 trap was lower when the N was diffused from water than from 2 M KCl. The results also indicated that different proportions of the NO3- and the NH4+ in aqueous solution were recovered in the trap after combined diffusion. The method is most suited...

  12. Total mineral material, acidity, sulphur, and nitrogen in rain and snow at Kentville, Nova Scotia

    Energy Technology Data Exchange (ETDEWEB)

    Herman, F A; Gorham, E

    1957-01-01

    Analyses of total ash, sulphur, ph, ammonia, and nitrate nitrogen have been made on 23 monthly precipitation samples and 17 individual snow samples collected between June 1952 and May 1954 at Kentville, Nova Scotia, in a predominantly agricultural area. Mean annual supply of total mineral ash was 95 kg/ha, of sulphur 9.1 hg/ha, of ammonia nitrogen 2.8 kg/ha, and of nitrate nitrogen 1.1 kg/ha. Average pH was 5.7, and rains more acid than this exhibited higher levels of both nitrate and sulphur, and a marked correlation between the latter and ammonia. Snow samples had much lower concentrations of ash, sulphur, and nitrogen than rain samples collected in the same months, which may perhaps indicate a lower efficiency of snow flakes in removing materials from the atmosphere.

  13. BRICKS WITH TOTAL REPLACEMENT OF CLAY BY FLY ASH MIXED WITH DIFFERENT MATERIALS

    OpenAIRE

    J.N Akhtar; J.Alam; M.N Akhtar

    2011-01-01

    Fly ash is a powdery substance obtained from the dust collectors in the Thermal power plants that use coal as fuel. From the cement point of view the mineralogy of Fly ash is important as it contains 80% - 90% of glass. The impurities in coal-mostly clays, shale’s, limestone & dolomite; they cannot be burned so they turn up as ash. The Fly ash of class C category was used as a raw material to total replacement of clay for making Fly ash bricks. In present study the effect of Fly ash with high...

  14. Total flavonoids content in the raw material and aqueous extractives from Bauhinia monandra Kurz (Caesalpiniaceae).

    Science.gov (United States)

    Fernandes, Ana Josane Dantas; Ferreira, Magda Rhayanny Assunção; Randau, Karina Perrelli; de Souza, Tatiane Pereira; Soares, Luiz Alberto Lira

    2012-01-01

    The aim of this work was to evaluate the spectrophotometric methodology for determining the total flavonoid content (TFC) in herbal drug and derived products from Bauhinia monandra Kurz. Several analytical parameters from this method grounded on the complex formed between flavonoids and AlCl₃ were evaluated such as herbal amount (0.25 to 1.25 g); solvent composition (ethanol 40 to 80%, v/v); as well as the reaction time and AlCl₃ concentration (2 to 9%, w/v). The method was adjusted to aqueous extractives and its performance studied through precision, linearity and preliminary robustness. The results showed an important dependence of the method response from reaction time, AlCl₃ concentration, sample amount, and solvent mixture. After choosing the optimized condition, the method was applied for the matrixes (herbal material and extractives), showing precision lower than 5% (for both parameters repeatability and intermediate precision), coefficient of determination higher than 0.99, and no important influence could be observed for slight variations from wavelength or AlCl₃ concentration. Thus, it could be concluded that the evaluated analytical procedure was suitable to quantify the total flavonoid content in raw material and aqueous extractives from leaves of B. monandra.

  15. Evaluation of the Total Cost of Ownership of Fuel Cell-Powered Material Handling Equipment

    Energy Technology Data Exchange (ETDEWEB)

    Ramsden, T.

    2013-04-01

    This report discusses an analysis of the total cost of ownership of fuel cell-powered and traditional battery-powered material handling equipment (MHE, or more typically 'forklifts'). A number of fuel cell MHE deployments have received funding support from the federal government. Using data from these government co-funded deployments, DOE's National Renewable Energy Laboratory (NREL) has been evaluating the performance of fuel cells in material handling applications. NREL has assessed the total cost of ownership of fuel cell MHE and compared it to the cost of ownership of traditional battery-powered MHE. As part of its cost of ownership assessment, NREL looked at a range of costs associated with MHE operation, including the capital costs of battery and fuel cell systems, the cost of supporting infrastructure, maintenance costs, warehouse space costs, and labor costs. Considering all these costs, NREL found that fuel cell MHE can have a lower overall cost of ownership than comparable battery-powered MHE.

  16. Total Flavonoids Content in the Raw Material and Aqueous Extractives from Bauhinia monandra Kurz (Caesalpiniaceae

    Directory of Open Access Journals (Sweden)

    Ana Josane Dantas Fernandes

    2012-01-01

    Full Text Available The aim of this work was to evaluate the spectrophotometric methodology for determining the total flavonoid content (TFC in herbal drug and derived products from Bauhinia monandra Kurz. Several analytical parameters from this method grounded on the complex formed between flavonoids and AlCl3 were evaluated such as herbal amount (0.25 to 1.25 g; solvent composition (ethanol 40 to 80%, v/v; as well as the reaction time and AlCl3 concentration (2 to 9%, w/v. The method was adjusted to aqueous extractives and its performance studied through precision, linearity and preliminary robustness. The results showed an important dependence of the method response from reaction time, AlCl3 concentration, sample amount, and solvent mixture. After choosing the optimized condition, the method was applied for the matrixes (herbal material and extractives, showing precision lower than 5% (for both parameters repeatability and intermediate precision, coefficient of determination higher than 0.99, and no important influence could be observed for slight variations from wavelength or AlCl3 concentration. Thus, it could be concluded that the evaluated analytical procedure was suitable to quantify the total flavonoid content in raw material and aqueous extractives from leaves of B. monandra.

  17. Total dose radiation effects of pressure sensors fabricated on uni-bond-SOI materials

    International Nuclear Information System (INIS)

    Zhu Shiyang; Huang Yiping; Wang Jin; Li Anzhen; Shen Shaoqun; Bao Minhang

    2001-01-01

    Piezoresistive pressure sensors with a twin-island structure were successfully fabricated using high quality Uni-bond-SOI (On Insulator) materials. Since the piezoresistors were structured by the single crystalline silicon overlayer of the SOI wafer and were totally isolated by the buried SiO 2 , the sensors are radiation-hard. The sensitivity and the linearity of the pressure sensors keep their original values after being irradiated by 60 Co γ-rays up to 2.3 x 10 4 Gy(H 2 O). However, the offset voltage of the sensor has a slight drift, increasing with the radiation dose. The absolute value of the offset voltage deviation depends on the pressure sensor itself. For comparison, corresponding polysilicon pressure sensors were fabricated using the similar process and irradiated at the same condition

  18. Modeling river total bed material load discharge using artificial intelligence approaches (based on conceptual inputs)

    Science.gov (United States)

    Roushangar, Kiyoumars; Mehrabani, Fatemeh Vojoudi; Shiri, Jalal

    2014-06-01

    This study presents Artificial Intelligence (AI)-based modeling of total bed material load through developing the accuracy level of the predictions of traditional models. Gene expression programming (GEP) and adaptive neuro-fuzzy inference system (ANFIS)-based models were developed and validated for estimations. Sediment data from Qotur River (Northwestern Iran) were used for developing and validation of the applied techniques. In order to assess the applied techniques in relation to traditional models, stream power-based and shear stress-based physical models were also applied in the studied case. The obtained results reveal that developed AI-based models using minimum number of dominant factors, give more accurate results than the other applied models. Nonetheless, it was revealed that k-fold test is a practical but high-cost technique for complete scanning of applied data and avoiding the over-fitting.

  19. Effect of dental restorative materials on total antioxidant capacity and calcium concentration of unstimulated saliva.

    Science.gov (United States)

    Ramezani, Gholam H; Moghadam, Mona-Momeni; Saghiri, Mohammad-Ali; Garcia-Godoy, Franklin; Asatourian, Armen; Aminsobhani, Mohsen; Scarbecz, Mark; Sheibani, Nader

    2017-01-01

    To evaluate the effect of dental amalgam and composite restorations on total antioxidant capacity (TAC) and calcium (Ca) ion concentration of unstimulated saliva. Forty-eight children aged 6-10 years selected and divided into three groups of sixteen (8 males, 8 females). In group A and B, samples consisted of two class II dental composite or amalgam restorations, while in group C samples were caries-free (control group). Unstimulated saliva from all samples was collected and TAC was measured by spectrophotometry using an adaptation of 2, 2'-azino-di-(3-ethylbenzthiazoline-6-sulphonate) (ABTS) assay. The Ca ion level was estimated by an auto- analyzer. Data were analyzed with one- and two-way ANOVA test, at a p difference between groups ( p differences within and between groups ( p Gender is an effective factor in changes induced in oral cavity as females showed more emphatic reaction to dental filling materials than males. Patients who have dental restorations, especially dental composites, should pay more attention to their dental hygiene, because dental restorations can increase oxidative stress and decrease Ca ion level in saliva, which might jeopardize remineralization process of tooth structures after demineralization. Key words: Amalgam, caries, composite, saliva, total antioxidant capacity.

  20. Total emissivity and spectral emissivity of high-temperature materials; Gesamtemissionsgrad und spektraler Emissionsgrad von Hochtemperaturmaterialien

    Energy Technology Data Exchange (ETDEWEB)

    Neuer, G.; Pohlmann, P.; Schreiber, E.

    1998-05-01

    A new emissivity measurement device with inductive sample heating is described. The disc shaped samples can be measured between 800 C and 2000 C in vacuum or in each available gas atmosphere. Two kinds of surface temperature measurement methods are described, one by measuring in a blackbody hole and one by measuring at the surface without additional measures to correct emissivity. Total normal and spectral emissivity at wavelengths between 0,5 {mu}m and 8,3 {mu}m of various high temperature materials like platinum and Pt-Rh-alloys, siliconcarbide and molybdenum disilicide have been measured. From the investigated materials a few have been selected as reference samples for comparative emissivity measurements fullfilling the requirement of stability on air up to 400 C to 1000 C in order to ensure reproducibility of the results at different measurement conditions in air and in vacuum. (orig.) [Deutsch] Der Aufbau einer neuen Messapparatur fuer Emissionsgradmessungen bei Temperaturen zwischen 1000 C und 2000 C wird beschrieben. Die scheibenfoermigen Proben werden induktiv beheizt, und die Messungen koennen entweder in Vakuum oder einer beliebigen Gasatmosphaere durchgefuehrt werden. Es werden zwei verschiedene Verfahren zur Bestimmung der Oberflaechentemperatur bechrieben, wobei entweder in einer oder direkt an der Oberflaeche ohne zusaetzliche Massnahmen zur Emissionsgradkorrektur gemessen wird. An verschiedenen Hochtemperaturwerkstoffen wie Platin und Platin-Rhodium-Legierungen, Siliziumkarbid mit unterschiedlichen Herstellungsarten und Molybdaen-Disilizid wurden der Gesamtemissionsgrad und der spektrale Emissionsgrad bei Wellenlaengen von 0,5 {mu}m bis 8,3 {mu}m senkrecht zur Oberflaeche gemessen. Aus den untersuchten Materialien wurden solche als Referenzmaterialien fuer vergleichende Emissionsgradmessungen ausgewaehlt, die sowohl im Vakuum als auch in Luft und bei Temperaturen von 1400 C bis 1600 C unter verschiedenen Messbedingungen reproduzierbare Ergebnisse

  1. Online Condition Monitoring of Bearings to Support Total Productive Maintenance in the Packaging Materials Industry.

    Science.gov (United States)

    Gligorijevic, Jovan; Gajic, Dragoljub; Brkovic, Aleksandar; Savic-Gajic, Ivana; Georgieva, Olga; Di Gennaro, Stefano

    2016-03-01

    The packaging materials industry has already recognized the importance of Total Productive Maintenance as a system of proactive techniques for improving equipment reliability. Bearing faults, which often occur gradually, represent one of the foremost causes of failures in the industry. Therefore, detection of their faults in an early stage is quite important to assure reliable and efficient operation. We present a new automated technique for early fault detection and diagnosis in rolling-element bearings based on vibration signal analysis. Following the wavelet decomposition of vibration signals into a few sub-bands of interest, the standard deviation of obtained wavelet coefficients is extracted as a representative feature. Then, the feature space dimension is optimally reduced to two using scatter matrices. In the reduced two-dimensional feature space the fault detection and diagnosis is carried out by quadratic classifiers. Accuracy of the technique has been tested on four classes of the recorded vibrations signals, i.e., normal, with the fault of inner race, outer race, and ball operation. The overall accuracy of 98.9% has been achieved. The new technique can be used to support maintenance decision-making processes and, thus, to increase reliability and efficiency in the industry by preventing unexpected faulty operation of bearings.

  2. Online Condition Monitoring of Bearings to Support Total Productive Maintenance in the Packaging Materials Industry

    Directory of Open Access Journals (Sweden)

    Jovan Gligorijevic

    2016-03-01

    Full Text Available The packaging materials industry has already recognized the importance of Total Productive Maintenance as a system of proactive techniques for improving equipment reliability. Bearing faults, which often occur gradually, represent one of the foremost causes of failures in the industry. Therefore, detection of their faults in an early stage is quite important to assure reliable and efficient operation. We present a new automated technique for early fault detection and diagnosis in rolling-element bearings based on vibration signal analysis. Following the wavelet decomposition of vibration signals into a few sub-bands of interest, the standard deviation of obtained wavelet coefficients is extracted as a representative feature. Then, the feature space dimension is optimally reduced to two using scatter matrices. In the reduced two-dimensional feature space the fault detection and diagnosis is carried out by quadratic classifiers. Accuracy of the technique has been tested on four classes of the recorded vibrations signals, i.e., normal, with the fault of inner race, outer race, and ball operation. The overall accuracy of 98.9% has been achieved. The new technique can be used to support maintenance decision-making processes and, thus, to increase reliability and efficiency in the industry by preventing unexpected faulty operation of bearings.

  3. A data reduction program for the linac total-scattering amorphous materials spectrometer (LINDA)

    International Nuclear Information System (INIS)

    Clarke, J.H.

    1976-01-01

    A computer program has been written to reduce the data collected on the A.E.R.E., Harwell linac total-scattering spectrometer (TSS) to the differential scattering cross-section. This instrument, used for studying the structure of amorphous materials such as liquids and glasses, has been described in detail. Time-of-flight spectra are recorded by several arrays of detectors at different angles using a pulsed incident neutron beam with a continuous distribution of wavelengths. The program performs all necessary background and container subtractions and also absorption corrections using the method of Paalman and Pings. The incident neutron energy distribution is obtained from the intensity recorded from a standard vanadium sample, enabling the observed differential scattering cross-section dsigma/dΩ (theta, lambda) and the structure factor S(Q) to be obtained. Various sample and vanadium geometries can be analysed by the program and facilities exist for the summation of data sets, smoothing of data, application of Placzek corrections and the output of processed data onto magnetic tape or punched cards. A set of example data is provided and some structure factors are shown with absorption corrections. (author)

  4. Determination of the total attenuation coefficient for six contact lens materials using the Beer-Lambert law.

    Science.gov (United States)

    Hull, C C; Crofts, N C

    1996-03-01

    The Beer-Lambert law has been used to determine the total attenuation coefficient, mu t, of three hard and three soft contact lens materials. The three hard contact lens materials were PMMA, Polycon II and Boston IV whereas the 3 soft materials were chosen with differing water contents of 38, 55 and 70%, respectively. The total attenuation coefficients of all six materials were obtained from measurements of the axial transmission at 632.8 nm of a series of plano powered lenses varying in axial thickness from 0.5 to 3.5 mm. The value of the total attenuation coefficient depends on both scattering and absorption and hence PMMA and Boston IV, which both incorporated a handling tint, showed significantly higher values (P 0.5) was found between any of the hydrated soft contact lens materials tested.

  5. Estimation of uncertainty of a reference material for proficiency testing for the determination of total mercury in fish in nature

    International Nuclear Information System (INIS)

    Santana, L V; Sarkis, J E S; Ulrich, J C; Hortellani, M A

    2015-01-01

    We provide an uncertainty estimates for homogeneity and stability studies of reference material used in proficiency test for determination of total mercury in fish fresh muscle tissue. Stability was estimated by linear regression and homogeneity by ANOVA. The results indicate that the reference material is both homogeneous and chemically stable over the short term. Total mercury concentration of the muscle tissue, with expanded uncertainty, was 0.294 ± 0.089 μg g −1

  6. ACQUISITIONS LIST, MAY 1966.

    Science.gov (United States)

    Harvard Univ., Cambridge, MA. Graduate School of Education.

    THIS ACQUISITIONS LIST IS A BIBLIOGRAPHY OF MATERIAL ON VARIOUS ASPECTS OF EDUCATION. OVER 300 UNANNOTATED REFERENCES ARE PROVIDED FOR DOCUMENTS DATING MAINLY FROM 1960 TO 1966. BOOKS, JOURNALS, REPORT MATERIALS, AND UNPUBLISHED MANUSCRIPTS ARE LISTED UNDER THE FOLLOWING HEADINGS--(1) ACHIEVEMENT, (2) ADOLESCENCE, (3) CHILD DEVELOPMENT, (4)…

  7. A rolling-gliding wear simulator for the investigation of tribological material pairings for application in total knee arthroplasty

    OpenAIRE

    Richter, Berna I; Ostermeier, Sven; Turger, Anke; Denkena, Berend; Hurschler, Christof

    2010-01-01

    Abstract Background Material wear testing is an important technique in the development and evaluation of materials for use in implant for total knee arthroplasty. Since a knee joint induces a complex rolling-gliding movement, standardised material wear testing devices such as Pin-on-Disc or Ring-on-Disc testers are suitable to only a limited extent because they generate pure gliding motion only. Methods A rolling-gliding wear simulator was thus designed, constructed and implemented, which sim...

  8. Control Analysis Of Tobacco Raw Material Supplies Using Eoq Method Economic Order Quantity To Reach Efficiency Total Costs Of Raw Material In Pr. Sukun

    Directory of Open Access Journals (Sweden)

    Wiwik Sudarwati

    2017-07-01

    Full Text Available The raw material inventory control system determines and guarantees the availability of raw material stock in the right quantity quality and timing. The problem in this research is the procurement of raw materials of tobacco. PR. Sukun still often experiences the excess. This is related to the frequency of raw material purchases and the quantity of raw material purchases which can lead to waste of working capital embedded in raw material inventory raw material ordering costs and raw material storage costs. The purpose of this research is to know how to make an efficiency level in procurement of raw material inventory between EOQ method compared with policy of PR. Sukun. The type of research used is analytic descriptive type. Data analysis begins by analyzing raw material quantity comparison total raw material inventory cost and raw material cost between PR Sukun policy with EOQ method. Based on the results of research known that by using EOQ method can be much more efficient compared to policy of PR. Sukun. The quantity and frequency of purchasing raw materials is less but still take into account the safety stock and reorder point so the production process is not disturbed. In addition the cost of purchasing ordering costs and raw materials storage costs less so as to create efficiencies on the cost of raw materials inventory. PR. Sukun in the procurement of raw material inventory should use EOQ method to be more efficient and take into account the safety stock and reorder point to avoid the inventory excess of raw materials.

  9. Research report of fiscal 1997. Study on total energy and material control (feasibility study on circulating society); 1997 nendo chosa hokokusho. Total energy and material control ni kansuru chosa (junkangata shakai kochiku kanosei chosa) chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In order to construct real sustainable global environment and human society in the 21st century called the century of environment, not only the innovation of manufacturing processes technically supporting such the construction but also the conception including the innovation of the whole society from a wide viewpoint are essential. As a total energy and material control system (TEMCOS) concept, the view of an energy-saving circulating society is attempted which minimizes a total energy and material flow in Japan, and the role and issue of manufacturing industry, in particular, material industry are extracted. As one of the targets of such a concept, the conception of an eco-town is also described. Paying attention on some important material industries including a mass material flow and consuming a large amount of energy such as metal, plastics and automobile industries, the study result on a material flow for every industry is arranged, and some effective issues contributing to minimize a material flow and control energy consumption and CO2 emission are extracted. 80 refs., 67 figs., 30 tabs.

  10. Totally James

    Science.gov (United States)

    Owens, Tom

    2006-01-01

    This article presents an interview with James Howe, author of "The Misfits" and "Totally Joe". In this interview, Howe discusses tolerance, diversity and the parallels between his own life and his literature. Howe's four books in addition to "The Misfits" and "Totally Joe" and his list of recommended books with lesbian, gay, bisexual, transgender,…

  11. National competent authorities. List no. 17. Regulations for the safe transport of radioactive material. 1985 edition (Safety series no.6 )

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1985-12-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  12. National competent authorities. List no. 1. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

    International Nuclear Information System (INIS)

    1967-04-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  13. National competent authorities. List no. 2. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

    International Nuclear Information System (INIS)

    1968-08-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  14. National competent authorities. List no. 3. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

    International Nuclear Information System (INIS)

    1970-06-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  15. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 20

    International Nuclear Information System (INIS)

    1989-03-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  16. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 24

    International Nuclear Information System (INIS)

    1993-01-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  17. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 21

    International Nuclear Information System (INIS)

    1990-02-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  18. National competent authorities. List no. 5. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1972-09-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  19. National competent authorities. List no. 4. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1971-06-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  20. National competent authorities. List no. 4. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

    International Nuclear Information System (INIS)

    1971-06-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  1. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 23

    International Nuclear Information System (INIS)

    1992-01-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  2. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 22

    International Nuclear Information System (INIS)

    1991-01-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  3. National competent authorities. List no. 5. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

    International Nuclear Information System (INIS)

    1972-09-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  4. National competent authorities. List no. 17. Regulations for the safe transport of radioactive material. 1985 edition (Safety series no.6 )

    International Nuclear Information System (INIS)

    1985-12-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  5. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 20

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-03-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  6. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 25

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-01-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  7. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 19

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-01-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  8. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 18

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1986-12-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  9. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 19

    International Nuclear Information System (INIS)

    1988-01-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  10. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 25

    International Nuclear Information System (INIS)

    1994-01-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  11. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 18

    International Nuclear Information System (INIS)

    1986-12-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  12. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 23

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-01-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  13. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 24

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-01-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  14. National competent authorities. List no. 3. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1970-06-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  15. National competent authorities. List no. 2. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1968-08-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  16. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 22

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-01-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  17. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 21

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1990-02-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  18. National competent authorities. List no. 1. Regulations for the safe transport of radioactive materials. 1967 edition (Safety series no. 6)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1967-04-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  19. Course Resource Lists.

    Science.gov (United States)

    England, Robert G.

    The Mountain-Plains Course Resource List is presented by job title for 26 curriculum areas. For each area the printed materials, audiovisual aids, and equipment needed for the course are listed. The 26 curriculum areas are: mathematics skills, communication skills, office education, lodging services, food services, marketing and distribution,…

  20. Automated atomic absorption spectrometric determination of total arsenic in water and streambed materials

    Science.gov (United States)

    Fishman, M.

    1977-01-01

    An automated method to determine both inorganic and organic forms of arsenic In water, water-suspended mixtures, and streambed materials Is described. Organic arsenic-containing compounds are decomposed by either ultraviolet radiation or by suHurlc acid-potassium persulfate digestion. The arsenic liberated, with Inorganic arsenic originally present, is reduced to arsine with sodium borohydrlde. The arable Is stripped from the solution with the aid of nitrogen and Is then decomposed In a tube furnace heated to 800 ??C which Is placed in the optical path of an atomic absorption spectrometer. Thirty samples per hour can be analyzed to levels of 1 ??g arsenic per liter.

  1. Characterization of high viscosity materials by total reflection x-ray fluorescence

    International Nuclear Information System (INIS)

    Custo, G.; Boeykens, S.; Vazquez, C.

    2000-01-01

    Gel are soft, solid or solid-like materials of two or more components, one of which is a liquid present in substantial amount. It consists of three-dimensional polymer network and solvent and is an important state of matter. Polymer is a long-chain molecule that is composed of a large number of repeating units of identical structure. These macromolecules assemblies recently developed have interesting properties, which depends of their structure. Their impurities change these physical properties. The great inconvenient of these systems is their high viscosity that difficult sample preparation and analysis by most common chemical techniques. The purpose of this work is to explore the applicability of the TRXRF for the multi-elemental and structural analysis of synthetic and natural aqueous gels (mean polymer molecular weight greater than 10 3 ). The polymers investigated are scleroglucan, polyacrilamide, polyoxyethylene and xhantan. (author)

  2. The total amounts of radioactively contaminated materials in forests in Fukushima, Japan

    Science.gov (United States)

    Hashimoto, Shoji; Ugawa, Shin; Nanko, Kazuki; Shichi, Koji

    2012-01-01

    There has been leakage of radioactive materials from the Fukushima Daiichi Nuclear Power Plant. A heavily contaminated area (≥ 134, 137Cs 1000 kBq m−2) has been identified in the area northwest of the plant. The majority of the land in the contaminated area is forest. Here we report the amounts of biomass, litter (small organic matter on the surface of the soil), coarse woody litter, and soil in the contaminated forest area. The estimated overall volume and weight were 33 Mm3 (branches, leaves, litter, and coarse woody litter are not included) and 21 Tg (dry matter), respectively. Our results suggest that removing litter is an efficient method of decontamination. However, litter is being continuously decomposed, and contaminated leaves will continue to fall on the soil surface for several years; hence, the litter should be removed promptly but continuously before more radioactive elements are transferred into the soil. PMID:22639724

  3. Single/total-economy aspects of production and utilization of energy from renewable raw materials

    Energy Technology Data Exchange (ETDEWEB)

    Meinhold, K

    1982-01-01

    ''Biosprit (biologically produced gasohol) can compete with synthetically produced ethanol for use in commerce and industries but not fully so with petrol due to the present refinery selling prices. Nevertheless, a 10% admixture will increase the price of one litre of petrol only slightly. If the consumer is not meant to cover this price increase, it could be covered by a small proportion of those expenditures which will be saved through a changeover to biogasohol production and which have been payed for necessary export refunding so far. Even at present, there is a considerable benefit involved for the overall national economy if there was a changeover to biogasohol production. In terms of total economy, transitional or initial subsidization would be just as justified as it is with initial promotion by the government with the introduction of new technologies.

  4. Applications of Total Scattering & Pair Distribution Function Analysis in Metal-Organic Framework Materials

    DEFF Research Database (Denmark)

    Xu, Hui; Birgisson, Steinar; Sommer, Sanna

    structure. At the same time, there is an ongoing debate on whether the SBU is present prior, or during MOF crystallization in MOF chemistry. However, little is known about MOFs formation mechanism. Currently techniques to study the in situ MOF formation process mainly focused on after......-crystallization process, for example in situ XRD and SAXS/WAXS study on MOF formation. However, the pre-crystallization process in the early stage of MOF formation is still unexplored. In this project, total scattering and PDF study will be carried out to explore the MOF formation process in early stage. This includes......Metal-Organic Frameworks (MOFs) is constructed by metal-oxide nodes and organic ligands. The formation of different structures of metal-oxide nodes (also called secondary building units, SBU) is crucial for MOF final structures, because the connectivity of SBU greatly influence the final MOF...

  5. Total phytosterol content in drug materials and extracts from roots of Acanthospermum hispidum by UV-VIS spectrophotometry

    Directory of Open Access Journals (Sweden)

    Larissa B. D. C. Araújo

    Full Text Available Acanthospermum hispidum DC., Asteraceae, is widely used in folk medicine in Brazil to treat respiratory diseases; this biological property has been attributed to its phytosterol content. This study evaluated the spectrophotometric assay method to quantify the total phytosterol content in raw materials and extracts from roots of A. hispidum. The procedure was based on the quantification at 625 nm after the Liebermann-Burchard reaction. The method was evaluated for linearity, repeatability, intermediate precision, accuracy and robustness. The date indicated that the procedure is a valid analytical tool for materials and herbal derivatives from A. hispidum.

  6. Stowing of radioactive materials package during road transport on vehicles of a total weight under 38 tons

    International Nuclear Information System (INIS)

    Gilles, P.; Chevalier, G.; Pouard, M.

    1985-01-01

    Results of testing allow the formulation of recommendations for stowing radioactive material packaging for severe accidental conditions during land transport. For frontal impact kinetic energy acquired by deceleration should be totally absorbed by the packaging, as this energy is proportional to its mass it will stay on the vehicle. For side impact, the packaging should yield because kinetic energy to absorb, if fasteners are not deformed before rupture, can be largely over the packaging mass and damage could be very severe

  7. Visual and colorimetric methods for rapid determination of total tannins in vegetable raw materials

    Directory of Open Access Journals (Sweden)

    S. P. Kalinkina

    2016-01-01

    Full Text Available The article is dedicated to the development of rapid colorimetric method for determining the amount of tannins in aqueous extracts of vegetable raw materials. The sorption-based colorimetric test is determining sorption tannins polyurethane foam, impregnated of FeCl3, receiving on its surface painted in black and green color of the reaction products and the determination of their in sorbent matrix. Selectivity is achieved by determining the tannins specific interaction of polyphenols with iron ions (III. The conditions of sorption-colorimetric method: the concentration of ferric chloride (III, impregnated in the polyurethane foam; sorbent mass in the analytical cartridge; degree of loading his agent; the contact time of the phases. color scales have been developed for the visual determination of the amount of tannins in terms of gallic acid. Spend a digitized image obtained scales using computer program “Sorbfil TLC”, excluding a subjective assessment of the intensity of the color scale of the test. The results obtained determine the amount of tannins in aqueous extracts of vegetable raw rapid method using tablets and analytical cartridges. The results of the test determination of tannins with visual and densitometric analytical signal registration are compared to known methods. Spend a metrological evaluation of the results of determining the amount of tannins sorption rapid colorimetric methods. Time visual and densitometric rapid determination of tannins, taking into account the sample preparation is 25–30 minutes, the relative error does not exceed 28 %. The developed test methods for quantifying the content of tannins allow to exclude the use of sophisticated analytical equipment, carry out the analysis in non-laboratory conditions do not require highly skilled personnel.

  8. 10 CFR Appendix L to Part 110 - Illustrative List of Byproduct Materials Under NRC Export/Import Licensing Authority a

    Science.gov (United States)

    2010-01-01

    ... material produced, extracted, or converted for use for a commercial, medical, or research activity...) Gallium 72 (Ga 72) Germanium 68 (Ge 68) Germanium 71 (Ge 71) Gold 198 (Au 198) Gold 199 (Au 199) Hafnium...

  9. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 33. 2002 edition

    International Nuclear Information System (INIS)

    2002-01-01

    The IAEA's Regulations for the Safe Transport of Radioactive Material has been widely implemented among the IAEA's Member States since it was first published in 1961. Its objective is to protect people, property and the environment from the direct and indirect effects of radiation during the transport of radioactive material. Any national or international authority designated or otherwise recognized as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States, such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework, the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  10. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 32. 2001 edition

    International Nuclear Information System (INIS)

    2001-01-01

    The IAEA's Regulations for the Safe Transport of Radioactive Material has been widely implemented among the IAEA's Member States since it was first published in 1961. Its objective is to protect people, property and the environment from the direct and indirect effects of radiation during the transport of radioactive material. Any national or international authority designated or otherwise recognized as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States, such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework, the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  11. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 32. 2001 edition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-01-01

    The IAEA's Regulations for the Safe Transport of Radioactive Material has been widely implemented among the IAEA's Member States since it was first published in 1961. Its objective is to protect people, property and the environment from the direct and indirect effects of radiation during the transport of radioactive material. Any national or international authority designated or otherwise recognized as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States, such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework, the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  12. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 34. 2003 edition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-01-01

    The IAEA's Regulations for the Safe Transport of Radioactive Material has been widely implemented among the IAEA's Member States since it was first published in 1961. Its objective is to protect people, property and the environment from the direct and indirect effects of radiation during the transport of radioactive material. Any national or international authority designated or otherwise recognized as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States, such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework, the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  13. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 34. 2003 edition

    International Nuclear Information System (INIS)

    2003-01-01

    The IAEA's Regulations for the Safe Transport of Radioactive Material has been widely implemented among the IAEA's Member States since it was first published in 1961. Its objective is to protect people, property and the environment from the direct and indirect effects of radiation during the transport of radioactive material. Any national or international authority designated or otherwise recognized as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States, such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework, the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  14. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 35. 2004 edition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-01-01

    The IAEA's Regulations for the Safe Transport of Radioactive Material has been widely implemented among the IAEA's Member States since it was first published in 1961. Its objective is to protect people, property and the environment from the direct and indirect effects of radiation during the transport of radioactive material. Any national or international authority designated or otherwise recognized as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States, such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework, the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  15. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 33. 2002 edition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-01-01

    The IAEA's Regulations for the Safe Transport of Radioactive Material has been widely implemented among the IAEA's Member States since it was first published in 1961. Its objective is to protect people, property and the environment from the direct and indirect effects of radiation during the transport of radioactive material. Any national or international authority designated or otherwise recognized as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States, such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework, the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  16. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 35. 2004 edition

    International Nuclear Information System (INIS)

    2004-01-01

    The IAEA's Regulations for the Safe Transport of Radioactive Material has been widely implemented among the IAEA's Member States since it was first published in 1961. Its objective is to protect people, property and the environment from the direct and indirect effects of radiation during the transport of radioactive material. Any national or international authority designated or otherwise recognized as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States, such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework, the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  17. GGVS. Ordinance on road transport of hazardous materials, including the European agreement on international road transport of hazardous materials (ADR), in their wording. Annexes A and B. Ordinances regarding exceptions from GGVS and from the ordinance on rail transport of hazardous materials, GGVE. Reasons. Selected guidelines. List of materials. 6. rev. and enlarged ed.

    International Nuclear Information System (INIS)

    Ridder, K.

    1990-01-01

    The brochure contains the following texts: (1) Ordinance on road transport of hazardous materials (GGVS), including the European agreement on international road transport of hazardous materials (ADR), as of 1990: Skeleton ordinance, annexes A and B, reasons given for the first version, and for the first amendment in 1988, execution guidelines - RS 002 (guidelines for executing the ordinance on road transport of hazardous materials, with catalogue of penalties), guidelines for drawing up written instructions for the event of accidents - RS 006, guiding principles for the training of vehicle conductors; (2) ordinance regarding exceptions from the ordinance on road transport of hazardous materials; (3) ordinance regarding exceptions from the ordinance on rail transport of hazardous materials; (4) selected guidelines: Technical guidelines TR IBC K 001, TRS 003, TRS 004, TRS 005, TRS 006; (5) listing of materials and objects governed by the ordinance on hazardous materials transport; (6) catalogue of penalties relative to road transport of hazardous materials. (orig./HP) [de

  18. A rolling-gliding wear simulator for the investigation of tribological material pairings for application in total knee arthroplasty

    Directory of Open Access Journals (Sweden)

    Denkena Berend

    2010-06-01

    Full Text Available Abstract Background Material wear testing is an important technique in the development and evaluation of materials for use in implant for total knee arthroplasty. Since a knee joint induces a complex rolling-gliding movement, standardised material wear testing devices such as Pin-on-Disc or Ring-on-Disc testers are suitable to only a limited extent because they generate pure gliding motion only. Methods A rolling-gliding wear simulator was thus designed, constructed and implemented, which simulates and reproduces the rolling-gliding movement and loading of the knee joint on specimens of simplified geometry. The technical concept was to run a base-plate, representing the tibia plateau, against a pivoted cylindrical counter-body, representing one femur condyle under an axial load. A rolling movement occurs as a result of the friction and pure gliding is induced by limiting the rotation of the cylindrical counter-body. The set up also enables simplified specimens handling and removal for gravimetrical wear measurements. Long-term wear tests and gravimetrical wear measurements were carried out on the well known material pairings: cobalt chrome-polyethylene, ceramic-polyethylene and ceramic-ceramic, over three million motion cycles to allow material comparisons to be made. Results The observed differences in wear rates between cobalt-chrome on polyethylene and ceramic on polyethylene pairings were similar to the differences of published data for existing material-pairings. Test results on ceramic-ceramic pairings of different frontal-plane geometry and surface roughness displayed low wear rates and no fracture failures. Conclusions The presented set up is able to simulate the rolling-gliding movement of the knee joint, is easy to use, and requires a minimum of user intervention or monitoring. It is suitable for long-term testing, and therefore a useful tool for the investigation of new and promising materials which are of interest for application in

  19. A rolling-gliding wear simulator for the investigation of tribological material pairings for application in total knee arthroplasty.

    Science.gov (United States)

    Richter, Berna I; Ostermeier, Sven; Turger, Anke; Denkena, Berend; Hurschler, Christof

    2010-06-15

    Material wear testing is an important technique in the development and evaluation of materials for use in implant for total knee arthroplasty. Since a knee joint induces a complex rolling-gliding movement, standardised material wear testing devices such as Pin-on-Disc or Ring-on-Disc testers are suitable to only a limited extent because they generate pure gliding motion only. A rolling-gliding wear simulator was thus designed, constructed and implemented, which simulates and reproduces the rolling-gliding movement and loading of the knee joint on specimens of simplified geometry. The technical concept was to run a base-plate, representing the tibia plateau, against a pivoted cylindrical counter-body, representing one femur condyle under an axial load. A rolling movement occurs as a result of the friction and pure gliding is induced by limiting the rotation of the cylindrical counter-body. The set up also enables simplified specimens handling and removal for gravimetrical wear measurements. Long-term wear tests and gravimetrical wear measurements were carried out on the well known material pairings: cobalt chrome-polyethylene, ceramic-polyethylene and ceramic-ceramic, over three million motion cycles to allow material comparisons to be made. The observed differences in wear rates between cobalt-chrome on polyethylene and ceramic on polyethylene pairings were similar to the differences of published data for existing material-pairings. Test results on ceramic-ceramic pairings of different frontal-plane geometry and surface roughness displayed low wear rates and no fracture failures. The presented set up is able to simulate the rolling-gliding movement of the knee joint, is easy to use, and requires a minimum of user intervention or monitoring. It is suitable for long-term testing, and therefore a useful tool for the investigation of new and promising materials which are of interest for application in knee joint replacement implants.

  20. A rolling-gliding wear simulator for the investigation of tribological material pairings for application in total knee arthroplasty

    Science.gov (United States)

    2010-01-01

    Background Material wear testing is an important technique in the development and evaluation of materials for use in implant for total knee arthroplasty. Since a knee joint induces a complex rolling-gliding movement, standardised material wear testing devices such as Pin-on-Disc or Ring-on-Disc testers are suitable to only a limited extent because they generate pure gliding motion only. Methods A rolling-gliding wear simulator was thus designed, constructed and implemented, which simulates and reproduces the rolling-gliding movement and loading of the knee joint on specimens of simplified geometry. The technical concept was to run a base-plate, representing the tibia plateau, against a pivoted cylindrical counter-body, representing one femur condyle under an axial load. A rolling movement occurs as a result of the friction and pure gliding is induced by limiting the rotation of the cylindrical counter-body. The set up also enables simplified specimens handling and removal for gravimetrical wear measurements. Long-term wear tests and gravimetrical wear measurements were carried out on the well known material pairings: cobalt chrome-polyethylene, ceramic-polyethylene and ceramic-ceramic, over three million motion cycles to allow material comparisons to be made. Results The observed differences in wear rates between cobalt-chrome on polyethylene and ceramic on polyethylene pairings were similar to the differences of published data for existing material-pairings. Test results on ceramic-ceramic pairings of different frontal-plane geometry and surface roughness displayed low wear rates and no fracture failures. Conclusions The presented set up is able to simulate the rolling-gliding movement of the knee joint, is easy to use, and requires a minimum of user intervention or monitoring. It is suitable for long-term testing, and therefore a useful tool for the investigation of new and promising materials which are of interest for application in knee joint replacement

  1. Career listings.

    Science.gov (United States)

    1994-01-12

    Nursing Standard regrets that it is no longer able to take listings over the telephone because of unprecedented demand. Readers are reminded that the listings section is for the use of charitable and professional organisations, unions and health authorities to publicise forthcoming events.

  2. Dead Ends and Detours En Route to Total Syntheses of the 1990s A list of abbreviations can be found at the end of the article.

    Science.gov (United States)

    Sierra; de La Torre MC

    2000-05-01

    From the very beginning organic chemistry and total synthesis have been intimately joined. In fact, one of the first things that freshmen in organic chemistry learn is how to join two molecules together to obtain a more complex one. Of course they still have a long way to go to become fully mature synthetic chemists, but they must have the primary instinct to build molecules, as synthesis is the essence of organic chemistry. With the different points of view that actually coexist in the chemical community about the maturity of the science (art, or both) of organic synthesis, it is clear that nowadays we know how to make almost all of the most complex molecules ever isolated. The primary question is how easy is it to accomplish? For the readers of papers describing the total synthesis of either simple or complex molecules, it appears that the routes followed are, most of the time, smooth and free of troubles. The synthetic scheme written on paper is, apparently, done in the laboratory with few, if any, modifications and these, essentially, seem to be based on finding the optimal experimental conditions to effect the desired reaction. Failures in the planned synthetic scheme to achieve the goal, detours imposed by unexpected reactivity, or the absence of reactivity are almost never discussed, since they may diminish the value of the work reported. This review attempts to look at total synthesis from a different side; it will focus on troubles found during the synthetic work that cause detours from the original synthetic plan, or on the dead ends that eventually may force redesign. From there, the evolution from the original route to the final successful one that achieves the synthetic target will be presented. The syntheses discussed in this paper have been selected because they contain explicit information about the failures of the original synthetic plan, together with the evolution of the final route to the target molecule. Therefore, they contain a lot of useful

  3. Probing Amorphous Components in High Temperature TE Materials by in situ Total Scattering and the Pair Distribution Function (PDF) Method

    DEFF Research Database (Denmark)

    Reardon, Hazel; Iversen, Bo Brummerstedt; Blichfeld, Anders Bank

    -I clathrate Ba8Ga16Ge30. This suggests that local structure reorientations in the cage are likely to be the root cause of the degradation of the structure. This deepens our understanding of disordered clathrates, and provides evidence that the PDF technique is an effective method for probing local structure.......e., by measuring both the Bragg and diffuse scattering from a sample. This method has rarely been exploited by the non-oxide thermoelectrics community. , , Treating total scattering data by the Pair Distribution Function method is a logical approach to understanding defects, disorder and amorphous components...... to heating cycles, then we are closer to distinguishing how we may generate materials that do not undergo specific structure reorientation processes, and/or how we may mitigate them before they occur. Here, we will present a total scattering and PDF study that probes the local structure of the Type...

  4. Radioactive Substances Act 1960. Keeping and use of radioactive materials; list of registrations in England and Wales issued under the Radioactive Substances Act 1960 for the keeping and use of radioactive materials and mobile

    International Nuclear Information System (INIS)

    1989-05-01

    Through the Radioactive Substances Act 1960 (RSA 60), Her Majesty's Inspectorate of Pollution (Radioactive Substances) (HMIP) exercises control, on behalf of the Secretary of State for the Environment, over the keeping and use of radioactive material and the accumulation and disposal of radioactive waste in England. HMIP also provides technical advice to the Secretary of State for Wales in connection with the enforcement of RSA 60 in Wales. Registrations under RSA 60 for the keeping and use of radioactive materials in England and Wales are issued respectively by the Secretaries of State for the Environment and Wales, following careful assessment of the radiological consequences for members of the public. Registrations impose strict limits and conditions and premises and apparatus are subject to scrutiny by HMIP Inspectors to ensure compliance. A list contains names and addresses of those registered in England and Wales for the keeping and use of radioactive materials and mobile apparatus

  5. Use of INAA in the preparation of a set soil Reference Materials with certified values of total element contents

    International Nuclear Information System (INIS)

    Kucera, J.; Horakova, J.; Soukal, L.

    1997-01-01

    A set of certified Reference Materials was prepared consisting of four natural agricultural soils with normal (n) and elevated (e) levels of element contents: CRM 7001 Light Sandy Soil (n), CRM 7002 Light Sandy Soil (e), CRM 7003 Silty Clay Loam (n), and CRM 7004 Loam (e). In these materials, certified and/or information values of the total contents of the elements As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, V and Zn, and their fractions extractable by aqua regia, boiling and cold 2M nitric acid were derived from an interlaboratory comparison in which 28 laboratories participated. Highly precise and accurate procedures of instrumental neutron activation analysis (INAA) were employed for homogeneity testing and also for certification of the total element contents. For comparation purposes, NIST SRM-2704 Buffalo River Sediment was analyzed by INAA, as well. The INAA results obtained compared very well with the certified and/or information values for four soil CRMs and also with NIST values for SRM-2704. From this agreement, a very high reliability of the new soil CRMs can be inferred. (author)

  6. Total neutron-counting plutonium inventory measurement systems (PIMS) and their potential application to near real time materials accountancy (NRTMA)

    International Nuclear Information System (INIS)

    Driscall, I.; Fox, G.H.; Orr, C.H.; Whitehouse, K.R.

    1988-01-01

    A radiometric method of determining the inventory of an operating plutonium plant is described. An array of total neutron counters distributed across the plant is used to estimate hold-up at each plant item. Corrections for the sensitivity of detectors to plutonium in adjacent plant items are achieved through a matrix approach. This paper describes our experience in design, calibration and operation of a Plutonium Inventory Measurement System (PIMS) on an oxalate precipitation plutonium finishing line. Data from a recent trial of Near-Real-Time Materials Accounting (NRTMA) using the PIMS are presented and used to illustrate its present performance and problem areas. The reader is asked to consider what role PIMS might have in future accountancy systems

  7. Determination of total fluorine in five coal reference materials by proton-induced gamma-ray emission spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Roelandts, I.; Robaye, G.; Delbrouck-Habaru, J.M.; Weber, G. [University of Liege, Sart (Belgium). Dept. of Geology, Petrology and Geochemistry

    1996-03-01

    The direct non-destructive proton-induced gamma-ray emission (PIGE) technique with a germanium detector was applied to the determination of total fluorine concentration in five coal reference materials (BCR 30, NIST 1632b, NIST 1635, SARM 20 and USGS CLB-1). Duplicate analyses were made from five randomly selected bottles of each coal. Individual data are presented and some problems (calibration, proton stopping power, effects of sample heating by the proton beam, background estimation) which were encountered during this study are discussed. Sensitivity and reproducibility of the determinations, and homogeneity of the coal samples with respect to fluorine contents by analysis of variance were investigated. The present data are also compared with the few published values for these reference samples, including other PIGE data. The use of synthetic standards and spiked samples in the present study suggested that the PIGE method was more accurate than other techniques.

  8. Water Conservation Resource List.

    Science.gov (United States)

    NJEA Review, 1981

    1981-01-01

    Alarmed by the growing water shortage, the New Jersey State Office of Dissemination has prepared this annotated list of free or inexpensive instructional materials for teaching about water conservation, K-l2. A tipsheet for home water conservation is appended. (Editor/SJL)

  9. Materials and technology

    International Nuclear Information System (INIS)

    Gockel, E.; Simon, J.

    1998-01-01

    New materials and the processes for their economical fabrication and use are the factors which drive innovation in totally different fields of technology, such as energy engineering, transport, and information. But they also open up new fields of technology such as micro systems or medicine technology. Five out of a total of twelve articles are separately listed in the ENERGY database [de

  10. Analysis of Ingredient Lists to Quantitatively Characterize ...

    Science.gov (United States)

    The EPA’s ExpoCast program is developing high throughput (HT) approaches to generate the needed exposure estimates to compare against HT bioactivity data generated from the US inter-agency Tox21 and the US EPA ToxCast programs. Assessing such exposures for the thousands of chemicals in consumer products requires data on product composition. This is a challenge since quantitative product composition data are rarely available. We developed methods to predict the weight fractions of chemicals in consumer products from weight fraction-ordered chemical ingredient lists, and curated a library of such lists from online manufacturer and retailer sites. The probabilistic model predicts weight fraction as a function of the total number of reported ingredients, the rank of the ingredient in the list, the minimum weight fraction for which ingredients were reported, and the total weight fraction of unreported ingredients. Weight fractions predicted by the model compared very well to available quantitative weight fraction data obtained from Material Safety Data Sheets for products with 3-8 ingredients. Lists were located from the online sources for 5148 products containing 8422 unique ingredient names. A total of 1100 of these names could be located in EPA’s HT chemical database (DSSTox), and linked to 864 unique Chemical Abstract Service Registration Numbers (392 of which were in the Tox21 chemical library). Weight fractions were estimated for these 864 CASRN. Using a

  11. A total cost perspective on use of polymeric materials in solar collectors – Importance of environmental performance on suitability

    International Nuclear Information System (INIS)

    Carlsson, Bo; Persson, Helena; Meir, Michaela; Rekstad, John

    2014-01-01

    Highlights: • A polymeric solar collector system was compared with two traditional ones. • It was found the best in terms of climatic performance per solar heat collected. • The differences in climatic cost between the systems compared however are small. • The low climatic cost makes solar heating better compared to natural gas heating. • Use of Ecoindicator 99 for environmental cost makes solar heating even better. - Abstract: To assess the suitability of solar collector systems in which polymeric materials are used versus those in which more traditional materials are used, a case study was undertaken. In this case study a solar heating system with polymeric solar collectors was compared with two equivalent but more traditional solar heating systems: one with flat plate solar collectors and one with evacuated tube solar collectors. To make the comparison, a total cost accounting approach was adopted. The life cycle assessment (LCA) results clearly indicated that the polymeric solar collector system is the best as regards climatic and environmental performance when they are expressed in terms of the IPPC 100 a indicator and the Ecoindicator 99, H/A indicator, respectively. In terms of climatic and environmental costs per amount of solar heat collected, the differences between the three kinds of collector systems were small when compared with existing energy prices. With the present tax rates, it seems unlikely that the differences in environmental and climatic costs will have any significant influence on which system is the most favoured, from a total cost point of view. In the choice between a renewable heat source and a heat source based on the use of a fossil fuel, the conclusion was that for climatic performance to be an important economic factor, the tax or trade rate of carbon dioxide emissions must be increased significantly, given the initial EU carbon dioxide emission trade rate. The rate would need to be at least of the same order of magnitude

  12. Onlay bone augmentation on mouse calvarial bone using a hydroxyapatite/collagen composite material with total blood or platelet-rich plasma.

    Science.gov (United States)

    Ohba, Seigo; Sumita, Yoshinori; Umebayashi, Mayumi; Yoshimura, Hitoshi; Yoshida, Hisato; Matsuda, Shinpei; Kimura, Hideki; Asahina, Izumi; Sano, Kazuo

    2016-01-01

    The aim of this study was to assess newly formed onlay bone on mouse calvarial bone using a new artificial bone material, a hydroxyapatite/collagen composite, with total blood or platelet-rich plasma. The hydroxyapatite/collagen composite material with normal saline, total blood or platelet-rich plasma was transplanted on mouse calvarial bone. The mice were sacrificed and the specimens were harvested four weeks after surgery. The newly formed bone area was measured on hematoxylin and eosin stained specimens using Image J software. The hydroxyapatite/collagen composite materials with total blood or platelet-rich plasma induced a significantly greater amount of newly formed bone than that with normal saline. Moreover, bone marrow was observed four weeks after surgery in the transplanted materials with total blood or platelet-rich plasma but not with normal saline. However, there were no significant differences in the amount of newly formed bone between materials used with total blood versus platelet-rich plasma. The hydroxyapatite/collagen composite material was valid for onlay bone augmentation and this material should be soaked in total blood or platelet-rich plasma prior to transplantation. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Determination of total tin in geological materials by electrothermal atomic-absorption spectrophotometry using a tungsten-impregnated graphite furnace

    Science.gov (United States)

    Zhou, L.; Chao, T.T.; Meier, A.L.

    1984-01-01

    An electrothermal atomic-absorption spectrophotometric method is described for the determination of total tin in geological materials, with use of a tungsten-impregnated graphite furnace. The sample is decomposed by fusion with lithium metaborate and the melt is dissolved in 10% hydrochloric acid. Tin is then extracted into trioctylphosphine oxide-methyl isobutyl ketone prior to atomization. Impregnation of the furnace with a sodium tungstate solution increases the sensitivity of the determination and improves the precision of the results. The limits of determination are 0.5-20 ppm of tin in the sample. Higher tin values can be determined by dilution of the extract. Replicate analyses of eighteen geological reference samples with diverse matrices gave relative standard deviations ranging from 2.0 to 10.8% with an average of 4.6%. Average tin values for reference samples were in general agreement with, but more precise than, those reported by others. Apparent recoveries of tin added to various samples ranged from 95 to 111% with an average of 102%. ?? 1984.

  14. WIPP [Waste Isolation Pilot Plant]/SRL in situ tests: Part 2, Pictorial history of MIIT [Materials Interface Interactions Tests] and final MIIT matrices, assemblies, and sample listings

    International Nuclear Information System (INIS)

    Wicks, G.G.; Weinle, M.E.; Molecke, M.A.

    1987-01-01

    In situ testing of Savannah River Plant [SRP] waste glass is an important component in ensuring technical and public confidence in the safety and effective performance of the wasteforms. Savannah River Laboratory [SRL] is currently involved in joint programs involving field testing of SRP waste in Sweden, Belgium, and the United Kingdom. Most recently, this in situ effort has been expanded to include the first field tests to be conducted in the United States, involving burial of a variety of simulated nuclear waste systems. This new effort, called the Materials Interface Interactions Tests or MIIT, is a program jointly conducted by Sandia National Laboratory/Waste Isolation Pilot Plant [WIPP] and SRL. Over 1800 samples, supplied by the United States, France, West Germany, Belgium, Canada, Japan, and the United Kingdom, were buried approximately 650m below the earth's surface in the salt geology at WIPP, near Carlsbad, New Mexico. The MIIT program is one of the largest cooperative efforts ever undertaken in the waste management field; the data produced from these tests are designed to benefit a wide cross-section of the waste management community. An earlier document provided an overview of the WIPP MIIT program and described its place in the waste glass assessment program at Savannah River. This document represents the second in this series and its objectives include: (1) providing a pictorial history of assembly and installation of wasteforms, metals, and geologic samples in WIPP; (2) providing 'finalized and completed' sample matrices for the entire 7-part MIIT program; (3) documenting final sample assemblies by the use of schematic drawings, including each sample, its orientation, and its environment; and (4) providing a complete listing of all samples and the means for managing analyses and resulting data

  15. Division of Materials Science (DMS) meeting presentation

    Energy Technology Data Exchange (ETDEWEB)

    Cline, C.F.; Weber, M.J.

    1982-11-08

    Materials preparation techniques are listed. Materials preparation capabilities are discussed for making BeF/sub 2/ glasses and other materials. Materials characterization techniques are listed. (DLC)

  16. Survey of total error of precipitation and homogeneous HDL-cholesterol methods and simultaneous evaluation of lyophilized saccharose-containing candidate reference materials for HDL-cholesterol

    NARCIS (Netherlands)

    C.M. Cobbaert (Christa); H. Baadenhuijsen; L. Zwang (Louwerens); C.W. Weykamp; P.N. Demacker; P.G.H. Mulder (Paul)

    1999-01-01

    textabstractBACKGROUND: Standardization of HDL-cholesterol is needed for risk assessment. We assessed for the first time the accuracy of HDL-cholesterol testing in The Netherlands and evaluated 11 candidate reference materials (CRMs). METHODS: The total error (TE) of

  17. Truly Absorbed Microbial Protein Synthesis, Rumen Bypass Protein, Endogenous Protein, and Total Metabolizable Protein from Starchy and Protein-Rich Raw Materials

    NARCIS (Netherlands)

    Parand, Ehsan; Vakili, Alireza; Mesgaran, Mohsen Danesh; Duinkerken, Van Gert; Yu, Peiqiang

    2015-01-01

    This study was carried out to measure truly absorbed microbial protein synthesis, rumen bypass protein, and endogenous protein loss, as well as total metabolizable protein, from starchy and protein-rich raw feed materials with model comparisons. Predictions by the DVE2010 system as a more

  18. Certification of a reference material for determination of total cyanide in soil to support implementation of the International Standard ISO 11262:2011.

    Science.gov (United States)

    Scharf, Holger; Bremser, Wolfram

    2015-04-01

    Cyanides are among the most important inorganic pollutants to be tested and monitored in environmental compartments. They can be distinguished and determined as free cyanide, weak acid dissociable cyanide or as total cyanide. However, in any case obtained, measurement results are operationally defined referring to the applied analytical method. In 2011, the International Standard ISO 11262 has been published which specifies a normative analytical method for the determination of total cyanide in soil. The objective of the project described in this paper was to provide the first soil reference material (CRM) certified for its mass fraction of total cyanide on the basis of this standard. A total of 12 German laboratories with proven experience in the determination of cyanides in environmental samples participated in the certification study. Measurement results were evaluated in full compliance with the requirements of ISO Guide 35. Taking into account the results of the inter-laboratory comparison as well as the outcome of the homogeneity and stability studies, a certified mass fraction of total cyanide of 21.1 mg/kg and an expanded uncertainty (k = 2) of 1.3 mg/kg were assigned to the material. The reference material has been issued as CRM BAM-U114.

  19. Food sources of total omega 3 fatty acids (18:3 + 20:5 + 22:6), listed in descending order by percentages of their contribution to intake, based on data from the National Health and Nutrition Examination Survey 2005-2006

    Science.gov (United States)

    Food sources of total omega 3 fatty acids (18:3 + 20:5 + 22:6), listed in descending order by percentages of their contribution to intake, based on data from the National Health and Nutrition Examination Survey 2005-2006

  20. Safeguards summary event list (SSEL)

    International Nuclear Information System (INIS)

    Davidson, J.J.; MacMurdy, P.H.

    1980-12-01

    The List contains nine categories of events involving NRC licensed material or licensees. It is deliberately broad in scope for two main reasons. First, the list is designed to serve as a reference document. It is as complete and accurate as possible. Second, the list is intended to provide as broad a perspective of the nature of licensee-related events as possible. The nine categories of events are as follows: bomb-related events; intrusion events; missing and/or allegedly stolen events; transportation-related events; vandalism events; arson events; firearms-related events; sabotage events; and miscellaneous events

  1. Fiscal 2000 report on result of R and D of nonmetallic material recycling promotion technology (demonstration test and research, total system technology); 2000 nendo hitetsu kinzokukei sozai recycle sokushin gijutsu kenkyu kaihatsu seika hokokusho. Jissho shiken kenkyu, total system gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-03-01

    R and D was conducted on advanced recycling technology for aluminum and base metal/rare metal based materials, with fiscal 2000 results compiled. In the research of aluminum recycling technology, on a continuous fractional crystallization process and a purification by zinc removal process, the existing facilities for each demonstrated that they could simulate an aluminum scrap melting process capacity of 1,000 t/month, with a series of initial conditions determined. In the research of total system technology, combined test facilities were completed in which a purification process and a melt cleaning process were integrated. In the research of the recycling technology for base metal/rare metal based materials, a test was carried out by demonstrative facilities, with the aim of establishing copper regeneration technology in which high grade copper is produced using metal/resin based scraps such as shredder dust of automobiles as the materials. In structuring the total system technology, a preliminary survey and environmental load measures were carried out toward the practicability of a comprehensive copper metal collection recycling system. (NEDO)

  2. National competent authorities. List no. 16. Regulations for the safe transport of radioactive materials. 1973 revised edition (as amended) (Safety series no. 6)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1984-10-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  3. National competent authorities. List no. 11. Regulations for the safe transport of radioactive materials. 1973 revised edition (Safety series no. 6)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1979-04-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  4. National competent authorities. List no. 13. Regulations for the safe transport of radioactive materials. 1973 revised edition (as amended) (Safety series no. 6)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1981-10-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  5. National competent authorities. List no. 12. Regulations for the safe transport of radioactive materials. 1973 revised edition (as amended) (Safety series no. 6)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1980-07-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  6. National competent authorities. List no. 10. Regulations for the safe transport of radioactive materials. 1973 revised edition (Safety series no. 6)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1978-04-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  7. National competent authorities. List no. 9. Regulations for the safe transport of radioactive materials. 1973 revised edition (Safety series no. 6)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1977-08-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  8. National competent authorities. List no. 15. Regulations for the safe transport of radioactive materials. 1973 revised edition (as amended) (Safety series no. 6)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1983-10-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  9. National competent authorities. List no. 14. Regulations for the safe transport of radioactive materials. 1973 revised edition (as amended) (Safety series no. 6)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1982-10-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  10. National competent authorities. List no. 13. Regulations for the safe transport of radioactive materials. 1973 revised edition (as amended) (Safety series no. 6)

    International Nuclear Information System (INIS)

    1981-10-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  11. National competent authorities. List no. 7. Regulations for the safe transport of radioactive materials. 1973 revised edition (Safety series no. 6)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1975-01-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  12. National competent authorities. List no. 6. Regulations for the safe transport of radioactive materials. 1973 revised edition (Safety series no. 6)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1974-01-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  13. National competent authorities. List no. 11. Regulations for the safe transport of radioactive materials. 1973 revised edition (Safety series no. 6)

    International Nuclear Information System (INIS)

    1979-04-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  14. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 27. 1996 edition

    International Nuclear Information System (INIS)

    1996-01-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  15. National competent authorities. List no. 8. Regulations for the safe transport of radioactive materials. 1973 revised edition (Safety series no. 6)

    International Nuclear Information System (INIS)

    1976-01-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  16. National competent authorities. List no. 10. Regulations for the safe transport of radioactive materials. 1973 revised edition (Safety series no. 6)

    International Nuclear Information System (INIS)

    1978-04-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  17. National competent authorities. List no. 7. Regulations for the safe transport of radioactive materials. 1973 revised edition (Safety series no. 6)

    International Nuclear Information System (INIS)

    1975-01-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  18. National competent authorities. List no. 9. Regulations for the safe transport of radioactive materials. 1973 revised edition (Safety series no. 6)

    International Nuclear Information System (INIS)

    1977-08-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  19. National competent authorities. List no. 6. Regulations for the safe transport of radioactive materials. 1973 revised edition (Safety series no. 6)

    International Nuclear Information System (INIS)

    1974-01-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  20. National competent authorities. List no. 14. Regulations for the safe transport of radioactive materials. 1973 revised edition (as amended) (Safety series no. 6)

    International Nuclear Information System (INIS)

    1982-10-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  1. National competent authorities. List no. 16. Regulations for the safe transport of radioactive materials. 1973 revised edition (as amended) (Safety series no. 6)

    International Nuclear Information System (INIS)

    1984-10-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  2. National competent authorities. List no. 15. Regulations for the safe transport of radioactive materials. 1973 revised edition (as amended) (Safety series no. 6)

    International Nuclear Information System (INIS)

    1983-10-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  3. National competent authorities. List no. 12. Regulations for the safe transport of radioactive materials. 1973 revised edition (as amended) (Safety series no. 6)

    International Nuclear Information System (INIS)

    1980-07-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  4. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 30. 1999 edition

    International Nuclear Information System (INIS)

    1999-02-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  5. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 31. 2000 edition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-02-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  6. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 29. 1998 edition

    International Nuclear Information System (INIS)

    1998-02-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  7. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 30. 1999 edition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-02-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  8. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 26. 1995 edition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  9. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 29. 1998 edition

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  10. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 26. 1995 edition

    International Nuclear Information System (INIS)

    1995-01-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  11. National competent authorities responsible for approvals and authorizations in respect of the transport of radioactive material. List no. 31. 2000 edition

    International Nuclear Information System (INIS)

    2000-02-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness

  12. National competent authorities. List no. 8. Regulations for the safe transport of radioactive materials. 1973 revised edition (Safety series no. 6)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1976-01-01

    Any national or international authority designated or otherwise recognised as such for any purpose in connection with the transport Regulations is known as a competent authority. In the Member States such a body has the responsibility for establishing national legislation to bring the Agency's transport Regulations into effect and for assuring compliance with its requirements. Depending on the national regulatory or institutional framework the functions of the competent authority may be assigned to one or more bodies. To assist Member States in implementing the transport Regulations and carrying out responsibility for compliance assurance, the IAEA continues to maintain this updated list of designated national competent authorities. Member States are annually requested to verify the list for correctness and completeness.

  13. DisLexList

    DEFF Research Database (Denmark)

    2013-01-01

    DisLexList is a simple analysis script for the generation of lists of lexemes in discourses, and may be used as a tool in discourse analysis (critical and otherwise). DisLexList is, in its current state, able to generate simple word lists and lexeme list based on output from VISL's flat structure...

  14. Estimation of uncertainty of a reference material for proficiency testing for the determination of total mercury in fish in natura; Estimativa da incerteza de um material de referencia para ensaios de proficiencia para a determinacao de mercurio total em pescado in natura

    Energy Technology Data Exchange (ETDEWEB)

    Santana, L.V.; Sarkis, J.E.S.; Ulrich, J.C.; Hortellani, M.A., E-mail: santana-luciana@ig.com.br, E-mail: jesarkis@ipen.br, E-mail: jculrich@ipen.br, E-mail: mahortel@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    This study presents the uncertainty estimate for characterization, study of homogeneity and stability study obtained in the preparation of a reference material for the determination of total mercury in fish fresh muscle tissue for proficiency testing. The test results for stability were obtained by linear regression and to homogeneity study was obtained by ANOVA-one way showed that the material is homogeneous and stable. The value of total mercury concentration with expanded uncertainty for the material was 0,294 ± 0,089 μg g{sup -}. (author)

  15. MAK- and BAT values list 2000. Maximum permissible concentrations at the place of work and biological tolerance values for working materials

    International Nuclear Information System (INIS)

    2000-01-01

    The definitions and use of MAK and BAT values for hazardous materials are presented, and tables are presented for various hazardous materials, e.g. carcinogenic and allergogenic materials, aerosols and organic substances such as peroxides, benzenes, turpentine oil, and cooling lubricants. (SR) [de

  16. The Development of Stereotype-Free Teaching Materials for the K-12 Levels. A Selected and Annotated List of Bibliographies on Latin American Studies for Teachers K-12.

    Science.gov (United States)

    Woods, Richard D.

    This document contains suggestions and materials for developing stereotype-free teaching materials. The paper is divided into five parts: (1) introduction, (2) bibliographies, (3) proverbs, (4) Spanish names, and (5) Spanish loan words. The introduction outlines 17 suggestions for developing units on cultural enrichment. Multiple resources for…

  17. 15 CFR Supplement No. 3 to Part 783 - List of Specified Equipment and Non-Nuclear Material for the Reporting of Imports

    Science.gov (United States)

    2010-01-01

    ... is covered by this section 1.2 as a major shop-fabricated part of a pressure vessel. Reactor... several rotor tubes. The housings are made of or protected by materials resistant to corrosion by UF6. (f... protected by materials resistant to corrosion by UF6. 5.2. Specially designed or prepared auxiliary systems...

  18. The Picture Complexity Effect: Another List Composition Paradox

    Science.gov (United States)

    Nguyen, Khuyen; McDaniel, Mark A.

    2015-01-01

    "List composition effects" refer to the findings in which a given memory phenomenon shows discrepant patterns across different list designs (i.e., mixed or pure lists). These effects have typically been reported with verbal materials (e.g., word lists, paired associates, sentences); much less research has examined whether these effects…

  19. Support for the Delisting of Decontaminated Liquid Chemical Surety Materials as Listed Hazardous Waste from Specific Sources (STATE) MD02 in COMAR 10.51.02.16-1

    Science.gov (United States)

    1988-11-01

    radiography , and clear’y stated in I 160.81(c), EPA test systems without also bearing the handling of biohazardous materials." considers the inclusion of this...treatment, and necropsy, histology, radiography , and proper conduct of the study. control of disease. Additionally, EPA handling of bimazardous materials...inhalation Pa1 Page 8-77 hazard test reccgnizes that both volatility and toxicity affect the hazard potential in the workplace . To address these two

  20. High-frequency Total Focusing Method (TFM) imaging in strongly attenuating materials with the decomposition of the time reversal operator associated with orthogonal coded excitations

    Science.gov (United States)

    Villaverde, Eduardo Lopez; Robert, Sébastien; Prada, Claire

    2017-02-01

    In the present work, the Total Focusing Method (TFM) is used to image defects in a High Density Polyethylene (HDPE) pipe. The viscoelastic attenuation of this material corrupts the images with a high electronic noise. In order to improve the image quality, the Decomposition of the Time Reversal Operator (DORT) filtering is combined with spatial Walsh-Hadamard coded transmissions before calculating the images. Experiments on a complex HDPE joint demonstrate that this method improves the signal-to-noise ratio by more than 40 dB in comparison with the conventional TFM.

  1. O the Determination of the Complex Refractive Index of Powdered Materials in the 9 TO 11 Micrometer Spectral Region Utilizing AN Attenuated Total Reflectance Technique.

    Science.gov (United States)

    Gillespie, James Bryce

    1982-03-01

    A specific method of determining the complex refractive index of powdered materials using attenuated total reflectance (ATR) spectroscopy was investigated. A very precise laser/goniometric ATR system was assembled and applied to powdered samples of carbon blacks, graphite, kaolin clay, quartz, calcite, and sodalime glass beads. The reflectivity data fell into two categories: (1) data representative of a medium having a unique effective refractive index and (2) data representative of a scattering medium having no unique refractive index. Data of the first kind were obtained from all the carbon black, graphite, and kaolin clay samples. The Fahrenfort-Visser solution of the Fresnel equations was applied to the goniometric reflectivity data for these samples to obtain the complex refractive index of these effective media. The complex refractive index obtained in this manner is not that of the bulk material but is instead a value which may be related to the bulk material value through some refractive index mixing rule. A systematic experiment using carbon black of particle size 0.0106 mm diameter was conducted to determine the applicability of several mixture rules for the volume packing fraction range of .2 to .6 which is most often encountered. The Bruggemann effective medium theory produced credible results while the Lorentz-Lorenz rule and the empirical Biot-Arago rule were invalid in this volume packing region. The Bruggemann rule was applied to lampblack, Mogul-L carbon black, graphite, and kaolin clay to obtain the complex refractive indices of these materials from the ATR spectroscopy data. Goniometric reflectivity data representative of an inhomogeneous scattering medium were obtained from all the powdered quartz, powdered calcite, and sodalime glass beads samples. These samples all contained particles with diameters nearly as large as the wavelength. These data demonstrate that the ATR technique, coupled with an effective medium analysis, may be used to obtain

  2. An analysis of the impact of native oxide, surface contamination and material density on total electron yield in the absence of surface charging effects

    Energy Technology Data Exchange (ETDEWEB)

    Iida, Susumu, E-mail: susumu.iida@toshiba.co.jp [EUVL Infrastructure Development Center, Inc., 16-1 Onogawa, Tsukuba-shi, Ibaraki-ken, 305-8569 (Japan); Ohya, Kaoru [Institute of Technology and Science, The University of Tokushima, 2-1 Minamijyousanjima-cho,Tokushima, 770-8506 (Japan); Hirano, Ryoichi; Watanabe, Hidehiro [EUVL Infrastructure Development Center, Inc., 16-1 Onogawa, Tsukuba-shi, Ibaraki-ken, 305-8569 (Japan)

    2016-10-30

    Highlights: • Total electron yields were assessed in the absence of any surface charging effect. • Experimental and simulation results showed a low native oxide energy barrier. • The yield enhancement effect of a native oxide layer was confirmed. • The yield enhancement effect of a thin surface contamination layer was confirmed. • Deviations in the material density from the theoretical values were evaluated. - Abstract: The effects of the presence of a native oxide film or surface contamination as well as variations in material density on the total electron yield (TEY) of Ru and B{sub 4}C were assessed in the absence of any surface charging effect. The experimental results were analyzed using semi-empirical Monte Carlo simulations and demonstrated that a native oxide film increased the TEY, and that this effect varied with film thickness. These phenomena were explained based on the effect of the backscattered electrons (BSEs) at the interface between Ru and RuO{sub 2}, as well as the lower potential barrier of RuO{sub 2}. Deviations in the material density from the theoretical values were attributed to the film deposition procedure based on fitting simulated TEY curves to experimental results. In the case of B{sub 4}C, the TEY was enhanced by the presence of a 0.8-nm-thick surface contamination film consisting of oxygenated hydrocarbons. The effect of the low potential barrier of the contamination film was found to be significant, as the density of the B{sub 4}C was much lower than that of the Ru. Comparing the simulation parameters generated in the present work with Joy’s database, it was found that the model and the input parameters used in the simulations were sufficiently accurate.

  3. Acronym master list

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    This document is a master list of acronyms and other abbreviations that are used by or could be useful to, the personnel at Los Alamos National Laboratory. Many specialized and well-known abbreviations are not included in this list.

  4. National List of Beaches

    Data.gov (United States)

    U.S. Environmental Protection Agency — EPA has published a list of coastal recreation waters adjacent to beaches (or similar points of access) used by the public in the U.S. The list, required by the...

  5. Total Quality Management Simplified.

    Science.gov (United States)

    Arias, Pam

    1995-01-01

    Maintains that Total Quality Management (TQM) is one method that helps to monitor and improve the quality of child care. Lists four steps for a child-care center to design and implement its own TQM program. Suggests that quality assurance in child-care settings is an ongoing process, and that TQM programs help in providing consistent, high-quality…

  6. Safeguards Summary Event List (SSEL)

    International Nuclear Information System (INIS)

    Fadden, M.; Yardumian, J.

    1993-07-01

    The Safeguards Summary Event List provides brief summaries of hundreds of safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission. Events are described under the categories: Bomb-related, Intrusion, Missing/Allegedly Stolen, Transportation-related, Tampering/Vandalism, Arson, Firearms-related, Radiological Sabotage, Non-radiological Sabotage, and Miscellaneous. Because of the public interest, the Miscellaneous category also includes events reported involving source material, byproduct material, and natural uranium, which are exempt from safeguards requirements. Information in the event descriptions was obtained from official NRC sources

  7. Retrofitting Listed Buildings

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    2011-01-01

    The paper presents a case study where the energy demand for a listed building constructed in 1900 is reduced. Many older buildings are listed and have restrictions that include the entire building or that include only its exterior. For the building presented, only its exterior facade is listed. T...

  8. Title III List of Lists -- Data Tool

    Data.gov (United States)

    U.S. Environmental Protection Agency — This list was prepared to help firms handling chemicals determine whether they need to submit reports under sections 302, 304, or 313 of the Emergency Planning and...

  9. 78 FR 12295 - Procurement List; Additions

    Science.gov (United States)

    2013-02-22

    ... published notices of proposed additions to the Procurement List. After consideration of the material..., 508 Compliant, 12 Digit, Portable, Desktop, Battery Operated NPA: MidWest Enterprises for the Blind...

  10. Materialism.

    Science.gov (United States)

    Melnyk, Andrew

    2012-05-01

    Materialism is nearly universally assumed by cognitive scientists. Intuitively, materialism says that a person's mental states are nothing over and above his or her material states, while dualism denies this. Philosophers have introduced concepts (e.g., realization and supervenience) to assist in formulating the theses of materialism and dualism with more precision, and distinguished among importantly different versions of each view (e.g., eliminative materialism, substance dualism, and emergentism). They have also clarified the logic of arguments that use empirical findings to support materialism. Finally, they have devised various objections to materialism, objections that therefore serve also as arguments for dualism. These objections typically center around two features of mental states that materialism has had trouble in accommodating. The first feature is intentionality, the property of representing, or being about, objects, properties, and states of affairs external to the mental states. The second feature is phenomenal consciousness, the property possessed by many mental states of there being something it is like for the subject of the mental state to be in that mental state. WIREs Cogn Sci 2012, 3:281-292. doi: 10.1002/wcs.1174 For further resources related to this article, please visit the WIREs website. Copyright © 2012 John Wiley & Sons, Ltd.

  11. 77 FR 51522 - Procurement List Proposed Additions

    Science.gov (United States)

    2012-08-24

    ..., Barricade, Yellow, ``CAUTION'', Premium Grade, 3''W x 1000'L COVERAGE: A-List for the Total Government... Contract OFC, Fort Belvoir, VA Patricia Briscoe, Deputy Director, Business Operations (Pricing and...

  12. CO 2 Capture Capacity and Swelling Measurements of Liquid-like Nanoparticle Organic Hybrid Materials via Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy

    KAUST Repository

    Park, Youngjune

    2012-01-12

    Novel nanoparticle organic hybrid materials (NOHMs), which are comprised of organic oligomers or polymers tethered to an inorganic nanosized cores of various sizes, have been synthesized, and their solvating property for CO 2 was investigated using attenuated total reflectance (ATR) Fourier transform infrared (FT-IR) spectroscopy. Simultaneous measurements of CO 2 capture capacity and swelling behaviors of polyetheramine (Jeffamine M-2070) and its corresponding NOHMs (NOHM-I-PE2070) were reported at temperatures of (298, 308, 323 and 353) K and CO 2 pressure conditions ranging from (0 to 5.5) MPa. The polymeric canopy, or polymer bound to the nanoparticle surface, showed significantly less swelling behavior with enhanced or comparable CO 2 capture capacity compared to pure unbound polyetheramine. © 2011 American Chemical Society.

  13. Development of Total Reflection X-ray fluorescence spectrometry quantitative methodologies for elemental characterization of building materials and their degradation products

    Science.gov (United States)

    García-Florentino, Cristina; Maguregui, Maite; Marguí, Eva; Torrent, Laura; Queralt, Ignasi; Madariaga, Juan Manuel

    2018-05-01

    In this work, a Total Reflection X-ray fluorescence (TXRF) spectrometry based quantitative methodology for elemental characterization of liquid extracts and solids belonging to old building materials and their degradation products from a building of the beginning of 20th century with a high historic cultural value in Getxo, (Basque Country, North of Spain) is proposed. This quantification strategy can be considered a faster methodology comparing to traditional Energy or Wavelength Dispersive X-ray fluorescence (ED-XRF and WD-XRF) spectrometry based methodologies or other techniques such as Inductively Coupled Plasma Mass Spectrometry (ICP-MS). In particular, two kinds of liquid extracts were analysed: (i) water soluble extracts from different mortars and (ii) acid extracts from mortars, black crusts, and calcium carbonate formations. In order to try to avoid the acid extraction step of the materials and their degradation products, it was also studied the TXRF direct measurement of the powdered solid suspensions in water. With this aim, different parameters such as the deposition volume and the measuring time were studied for each kind of samples. Depending on the quantified element, the limits of detection achieved with the TXRF quantitative methodologies for liquid extracts and solids were set around 0.01-1.2 and 2-200 mg/L respectively. The quantification of K, Ca, Ti, Mn, Fe, Zn, Rb, Sr, Sn and Pb in the liquid extracts was proved to be a faster alternative to other more classic quantification techniques (i.e. ICP-MS), accurate enough to obtain information about the composition of the acidic soluble part of the materials and their degradation products. Regarding the solid samples measured as suspensions, it was quite difficult to obtain stable and repetitive suspensions affecting in this way the accuracy of the results. To cope with this problem, correction factors based on the quantitative results obtained using ED-XRF were calculated to improve the accuracy of

  14. Safeguards Summary Event List (SSEL)

    International Nuclear Information System (INIS)

    1984-03-01

    The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the U.S. Nuclear Regulatory Commission (NRC). Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, tampering/vandalism, arson, firearms, radiological sabotage and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

  15. Safeguards Summary Event List (SSEL)

    International Nuclear Information System (INIS)

    1983-02-01

    The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC). Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, vandalism, arson, firearms, radiological sabotage and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

  16. Safeguards Summary Event List (SSEL)

    International Nuclear Information System (INIS)

    1982-07-01

    The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC). Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, vandalism, arson, firearms, sabotage and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

  17. Title List of documents made publicly available

    International Nuclear Information System (INIS)

    1982-07-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes: (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979. Microfiche of the docketed information listed in the Title List is available for sale on a subscription basis from the National Technical Information Service (NTIS)

  18. Title List of documents made publicly available

    International Nuclear Information System (INIS)

    1982-06-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes: (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued throught the Department of Energy publication Power Reactor Docket Information, last published in January 1979. Microfiche of the docketed information listed in the Title List is available for sale on a subscription basis from the National Technical Information Service (NTIS)

  19. Materials

    CSIR Research Space (South Africa)

    Van Wyk, Llewellyn V

    2009-02-01

    Full Text Available . It is generally included as part of a structurally insulated panel (SIP) where the foam is sandwiched between external skins of steel, wood or cement. Cement composites Cement bonded composites are an important class of building materials. These products... for their stone buildings, including the Egyptians, Aztecs and Inca’s. As stone is a very dense material it requires intensive heating to become warm. Rocks were generally stacked dry but mud, and later cement, can be used as a mortar to hold the rocks...

  20. Safeguards summary event list (SSEL)

    International Nuclear Information System (INIS)

    1989-07-01

    The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC). Because of public interest, also included are events reported involving byproduct material which is exempt from safeguards requirements. Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, tampering/vandalism, arson, firearms, radiological sabotage, nonradiological sabotage, alcohol and drugs, and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

  1. Total protein

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/article/003483.htm Total protein To use the sharing features on this page, please enable JavaScript. The total protein test measures the total amount of two classes ...

  2. CRNL library serials list

    International Nuclear Information System (INIS)

    Alburger, T.P.

    1982-04-01

    A list of 1900 serial publications (periodicals, society transactions and proceedings, annuals and directories, indexes, newspapers, etc.) is presented with volumes and years held by the Main Library. This library is the largest in AECL as well as one of the largest scientific and technical libraries in North America, and functions as a Canadian resource for nuclear information. A main alphabetical list is followed by broad subject field lists representing research interests, and lists of abstract and index serials, general bibliographic serials, conference indexes, press releases, English translations, and original language journals

  3. Retail Shopping Lists

    DEFF Research Database (Denmark)

    Schmidt, Marcus

    2012-01-01

    categories. An association between the frequency of a brand's appearance on lists and the amount of money spent on advertising the brand could not be found. A strong link between brands, prices and store names is revealed. Price in the majority of cases refers to brands rather than to product categories......The paper addresses consumers' shopping lists. The current study is based on a survey of 871 lists collected at retail grocery stores. Most items on shopping lists appear on the product category level rather than the brand level. The importance of the brand level varies considerably across product...

  4. The critical micelle concentration of lecithin in bulk oils and medium chain triacylglycerol is influenced by moisture content and total polar materials.

    Science.gov (United States)

    Kim, JiSu; Kim, Mi-Ja; Lee, JaeHwan

    2018-09-30

    Effects of different moisture contents and oxidised compounds on the critical micelle concentration (CMC) of lecithin were determined in bulk oils and in medium-chain triacylglycerols (MCT). CMC of lecithin in MCT was significantly higher than that in other vegetable oils including olive, soybean, corn, and rapeseed oils (p < 0.05). Presence of moisture significantly affected the CMC of lecithin in MCT (p < 0.05). CMC of lecithin was high when the moisture content was below 900 ppm, whereas at a moisture content of 1000 ppm, CMC of lecithin decreased significantly (p < 0.05), and then started to increase. Addition of total polar materials (TPM), which are oxidation products, at 3 and 5% concentrations, decreased CMC of lecithin significantly (p < 0.05) in MCT, compared to when 0, 1, and 1.5% of TPM was added to MCT. As the degree of oxidation increased in corn oil, CMC of lecithin gradually decreased. Additionally, under different moisture contents, corn oils showed a similar pattern of CMC of lecithin in MCT, whereas oxidised corn oil had a little lower CMC of lecithin than unoxidised corn oil. The results clearly showed that the concentration of lecithin for the formation of micelles is greatly influenced by the presence of oxidation products and the moisture content in bulk oils. Copyright © 2018 Elsevier Ltd. All rights reserved.

  5. Report on a survey in fiscal 1999. Part 3. Survey on total energy and material control (Survey on feasibility of structuring a circulation type society); 1999 nendo total energy and material control ni kansuru chosa hokokusho. 3. Junkangata shakai kochiku kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Structuring a circulation type society indispensably requires effective utilization of energies and resources, to which approaches have been taken by industries independently. An approach upon structuring an industry crossing network may be taken effective for further effective utilization of the energies and resources. The present survey is intended to extract problems therefrom. It is also intended to perform surveys and studies on the following three points: (1) process-linking with different industries aimed at zero wasting in industrial complexes and electric furnaces dispersed adequately nationwide, (2) effective use and cascading utilization of energies and resources, and (3) a circulating type economic system simulation using metallic material industry as the core. It is further intended that problems shall be extracted; the results are compiled as the 'basic technology development for the metallic material circulating type economic system'; technological development themes are extracted; and the draft proposal shall be prepared. The total energy and materials control system (TECOS) activities are aimed at structuring a circulation type industrial structure, in which the following requirements are executed: the process-linking transcending the conventional industrial boundaries is performed; substances included in respective materials and discharges, and energies used in the processes are controlled comprehensively; the energies are utilized at ultra-high efficiency; and minimization of all the discharges is realized. (NEDO)

  6. Report on a survey in fiscal 1999. Part 3. Survey on total energy and material control (Survey on feasibility of structuring a circulation type society); 1999 nendo total energy and material control ni kansuru chosa hokokusho. 3. Junkangata shakai kochiku kanosei chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Structuring a circulation type society indispensably requires effective utilization of energies and resources, to which approaches have been taken by industries independently. An approach upon structuring an industry crossing network may be taken effective for further effective utilization of the energies and resources. The present survey is intended to extract problems therefrom. It is also intended to perform surveys and studies on the following three points: (1) process-linking with different industries aimed at zero wasting in industrial complexes and electric furnaces dispersed adequately nationwide, (2) effective use and cascading utilization of energies and resources, and (3) a circulating type economic system simulation using metallic material industry as the core. It is further intended that problems shall be extracted; the results are compiled as the 'basic technology development for the metallic material circulating type economic system'; technological development themes are extracted; and the draft proposal shall be prepared. The total energy and materials control system (TECOS) activities are aimed at structuring a circulation type industrial structure, in which the following requirements are executed: the process-linking transcending the conventional industrial boundaries is performed; substances included in respective materials and discharges, and energies used in the processes are controlled comprehensively; the energies are utilized at ultra-high efficiency; and minimization of all the discharges is realized. (NEDO)

  7. Development of equally intelligible Telugu sentence-lists to test speech recognition in noise.

    Science.gov (United States)

    Tanniru, Kishore; Narne, Vijaya Kumar; Jain, Chandni; Konadath, Sreeraj; Singh, Niraj Kumar; Sreenivas, K J Ramadevi; K, Anusha

    2017-09-01

    To develop sentence lists in the Telugu language for the assessment of speech recognition threshold (SRT) in the presence of background noise through identification of the mean signal-to-noise ratio required to attain a 50% sentence recognition score (SRTn). This study was conducted in three phases. The first phase involved the selection and recording of Telugu sentences. In the second phase, 20 lists, each consisting of 10 sentences with equal intelligibility, were formulated using a numerical optimisation procedure. In the third phase, the SRTn of the developed lists was estimated using adaptive procedures on individuals with normal hearing. A total of 68 native Telugu speakers with normal hearing participated in the study. Of these, 18 (including the speakers) performed on various subjective measures in first phase, 20 performed on sentence/word recognition in noise for second phase and 30 participated in the list equivalency procedures in third phase. In all, 15 lists of comparable difficulty were formulated as test material. The mean SRTn across these lists corresponded to -2.74 (SD = 0.21). The developed sentence lists provided a valid and reliable tool to measure SRTn in Telugu native speakers.

  8. Energia total de ruptura: um teste biomecânico para avaliação de material biológico com propriedade viscoelástica não linear Total energy of rupture: a biomechanical test to evaluate non-linear viscoelastic biological material

    Directory of Open Access Journals (Sweden)

    Feng Chung Wu

    2004-12-01

    Full Text Available Objetivo: Apresentação do teste biomecânico Energia Total de Ruptura para o estudo da resistência intrínseca de material biológico com propriedade viscoelástica não-linear representado neste trabalho por segmento íntegro de cólon descendente de rato. Métodos: Implementação do teste biomecânico Energia Total de Ruptura e do Sistema de Aquisição e Análise de dados Biomecânicos - SABI 2.0. Para esse fim, foram utilizados conceitos físico-mecânicos, computacionais e biomecânicos e como corpos de teste, 15 espécimes de cólon descendente de ratos. Resultados: O teste biomecânico Energia Total de Ruptura permitiu o cálculo da energia total acumulada necessária para promover a ruptura dos corpos de prova durante os ensaios mecânicos. Por meio da automatização e gerenciamento da aquisição e análise dos dados capturados foi possível a geração de gráficos e relatórios descritivos e estatísticos. Conclusão: Fundamentado em conceitos físico-mecânicos, computacionais e biomecânicos, o teste Energia Total de Ruptura pôde proporcionar análise matemática do comportamento dos segmentos de cólon descendente de ratos durante os ensaios, demonstrando ser um possível método de medição da resistência intrínseca desse material biológico com propriedade viscoelástica não-linear.Purpose: Presentation of the Total Energy of Rupture biomechanical test to evaluate the intrinsic resistance of the rat’s left colon which presents a non-linear viscoelastic property. Methods: Implementation of Total Energy of Rupture test (ETR and the Biomechanical Data Acquisition and Analysis System (SABI 2.0 based on physic-mechanical, computational and biomechanical concepts. Fifteen specimens of Wistar adults rat’s left colon where considered for experiments. Results: Using the TER biomechanical test it was possible calculate the accumulated total energy necessary to promote the specimens rupture during the mechanical trial. It was

  9. A landscape-scale study of land use and parent material effects on soil organic carbon and total nitrogen in the Konya Basin, Turkey

    Science.gov (United States)

    Mayes, M. T.; Marin-Spiotta, E.; Ozdogan, M.; Erdogan, M. A.

    2011-12-01

    In ecosystems where intensive farming and grazing have been occurring for millennia, there is poor understanding of how present-day soil biogeochemical properties relate to factors associated with soil parent materials (e.g. texture, mineralogy), and the net effects of long-term land use practices. Soil organic carbon (SOC) and total soil nitrogen (TN) are important for their roles in maintaining soil structure, moisture, fertility and contributing to carbon sequestration. Our research used a state factor approach (Jenny 1981) to study effects of soil parent materials and land use practices on SOC, TN, and other properties across thirty-five sites in the Konya Basin, an arid region in south-central Turkey farmed and grazed for over 8,000 years. This project is one of the first to study land use impacts on soils at a landscape scale (500 km2) in south-central Turkey, and incorporate geospatial data (e.g. a satellite imagery-derived land cover map we developed) to aid selection of field sites. Focusing on the plough layer (0-25cm) in two depth intervals, we compared effects of agriculture, orchard cultivation and grazing land use practices and clay-loam alluvial, sandy-loam volcanic and lacustrine clay soils on soil properties using standard least squares regression analyses. SOC and TN depended strongly on parent materials, but not on land use. Averaged across both depth intervals, alluvial soil SOC and TN concentrations (19.4 ± 1.32 Mg/ha SOC, 2.86 ± 1.23 Mg/ha TN) were higher and significantly different than lacustrine (9.72 ± 3.01 Mg/ha SOC, 1.57 ± 0.69 Mg/ha TN) and volcanic soil concentrations (7.40 ± 1.72 Mg/ha SOC, 1.02 ± 0.35 Mg/ha TN). Land use significantly affected SOC and TN on alluvial soils, but not on volcanic or lacustrine soils. Our results demonstrate the potential for land use to have different effects on different soils in this region. Our data on SOC, TN and other soil properties illustrate patterns in regional SOC and TN variability not

  10. Title list of documents made publicly available

    International Nuclear Information System (INIS)

    1991-01-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes docketed material associated with civilian nuclear power plants and other uses of radioactive materials and nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued though the Department of Energy publication Power Reactor Docket Information, last published in January 1979

  11. Standard Materials. A Descriptive List with Prices.

    Science.gov (United States)

    1962-03-12

    10.00 1056 Cupric Cyclohexanebutyrate ------------ Cu --------------------------- 16.0 5 10.00 1057 Dibutyltin Bis(2-ethylhexanoate) -------- Sn...pH (approx.) 9.2 ---------------------- 30 2.50 188 Potassium hydrogen tartrate ------------ pH (approx.) 3.6-----------------------60

  12. Automation of a problem list using natural language processing

    OpenAIRE

    Meystre, Stephane; Haug, Peter J

    2005-01-01

    Abstract Background The medical problem list is an important part of the electronic medical record in development in our institution. To serve the functions it is designed for, the problem list has to be as accurate and timely as possible. However, the current problem list is usually incomplete and inaccurate, and is often totally unused. To alleviate this issue, we are building an environment where the problem list can be easily and effectively maintained. Methods For this project, 80 medica...

  13. High frequency circular translation pin-on-disk method for accelerated wear testing of ultrahigh molecular weight polyethylene as a bearing material in total hip arthroplasty.

    Science.gov (United States)

    Saikko, Vesa

    2015-01-21

    The temporal change of the direction of sliding relative to the ultrahigh molecular weight polyethylene (UHMWPE) component of prosthetic joints is known to be of crucial importance with respect to wear. One complete revolution of the resultant friction vector is commonly called a wear cycle. It was hypothesized that in order to accelerate the wear test, the cycle frequency may be substantially increased if the circumference of the slide track is reduced in proportion, and still the wear mechanisms remain realistic and no overheating takes place. This requires an additional slow motion mechanism with which the lubrication of the contact is maintained and wear particles are conveyed away from the contact. A three-station, dual motion high frequency circular translation pin-on-disk (HF-CTPOD) device with a relative cycle frequency of 25.3 Hz and an average sliding velocity of 27.4 mm/s was designed. The pins circularly translated at high frequency (1.0 mm per cycle, 24.8 Hz, clockwise), and the disks at low frequency (31.4mm per cycle, 0.5 Hz, counter-clockwise). In a 22 million cycle (10 day) test, the wear rate of conventional gamma-sterilized UHMWPE pins against polished CoCr disks in diluted serum was 1.8 mg per 24 h, which was six times higher than that in the established 1 Hz CTPOD device. The wear mechanisms were similar. Burnishing of the pin was the predominant feature. No overheating took place. With the dual motion HF-CTPOD method, the wear testing of UHMWPE as a bearing material in total hip arthroplasty can be substantially accelerated without concerns of the validity of the wear simulation. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. Approach for determining the contributions of phytoplankton, colored organic material, and nonalgal particles to the total spectral absorption in marine waters.

    Science.gov (United States)

    Lin, Junfang; Cao, Wenxi; Wang, Guifeng; Hu, Shuibo

    2013-06-20

    Using a data set of 1333 samples, we assess the spectral absorption relationships of different wave bands for phytoplankton (ph) and particles. We find that a nonlinear model (second-order quadratic equations) delivers good performance in describing their spectral characteristics. Based on these spectral relationships, we develop a method for partitioning the total absorption coefficient into the contributions attributable to phytoplankton [a(ph)(λ)], colored dissolved organic material [CDOM; a(CDOM)(λ)], and nonalgal particles [NAP; a(NAP)(λ)]. This method is validated using a data set that contains 550 simultaneous measurements of phytoplankton, CDOM, and NAP from the NASA bio-Optical Marine Algorithm Dataset. We find that our method is highly efficient and robust, with significant accuracy: the relative root-mean-square errors (RMSEs) are 25.96%, 38.30%, and 19.96% for a(ph)(443), a(CDOM)(443), and the CDOM exponential slope, respectively. The performance is still satisfactory when the method is applied to water samples from the northern South China Sea as a regional case. The computed and measured absorption coefficients (167 samples) agree well with the RMSEs, i.e., 18.50%, 32.82%, and 10.21% for a(ph)(443), a(CDOM)(443), and the CDOM exponential slope, respectively. Finally, the partitioning method is applied directly to an independent data set (1160 samples) derived from the Bermuda Bio-Optics Project that contains relatively low absorption values, and we also obtain good inversion accuracy [RMSEs of 32.37%, 32.57%, and 11.52% for a(ph)(443), a(CDOM)(443), and the CDOM exponential slope, respectively]. Our results indicate that this partitioning method delivers satisfactory performance for the retrieval of a(ph), a(CDOM), and a(NAP). Therefore, this may be a useful tool for extracting absorption coefficients from in situ measurements or remotely sensed ocean-color data.

  15. [A model list of high risk drugs].

    Science.gov (United States)

    Cotrina Luque, J; Guerrero Aznar, M D; Alvarez del Vayo Benito, C; Jimenez Mesa, E; Guzman Laura, K P; Fernández Fernández, L

    2013-12-01

    «High-risk drugs» are those that have a very high «risk» of causing death or serious injury if an error occurs during its use. The Institute for Safe Medication Practices (ISMP) has prepared a high-risk drugs list applicable to the general population (with no differences between the pediatric and adult population). Thus, there is a lack of information for the pediatric population. The main objective of this work is to develop a high-risk drug list adapted to the neonatal or pediatric population as a reference model for the pediatric hospital health workforce. We made a literature search in May 2012 to identify any published lists or references in relation to pediatric and/or neonatal high-risk drugs. A total of 15 studies were found, from which 9 were selected. A model list was developed mainly based on the ISMP one, adding strongly perceived pediatric risk drugs and removing those where the pediatric use was anecdotal. There is no published list that suits pediatric risk management. The list of pediatric and neonatal high-risk drugs presented here could be a «reference list of high-risk drugs » for pediatric hospitals. Using this list and training will help to prevent medication errors in each drug supply chain (prescribing, transcribing, dispensing and administration). Copyright © 2013 Asociación Española de Pediatría. Published by Elsevier Espana. All rights reserved.

  16. Total algorithms

    NARCIS (Netherlands)

    Tel, G.

    We define the notion of total algorithms for networks of processes. A total algorithm enforces that a "decision" is taken by a subset of the processes, and that participation of all processes is required to reach this decision. Total algorithms are an important building block in the design of

  17. Safeguards Summary Event List (SSEL)

    International Nuclear Information System (INIS)

    1991-07-01

    The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC). Because of public interest, the Miscellaneous category includes a few events which involve either source material, byproduct material, or natural uranium which are exempt from safeguards requirements. Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, tampering/vandalism, arson, firearms, radiological sabotage, nonradiological sabotage, pre-1990 alcohol and drugs (involving reactor operators, security force members, or management persons), and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

  18. The Kjeldahl method as a primary reference procedure for total protein in certified reference materials used in clinical chemistry. II. Selection of direct Kjeldahl analysis and its preliminary performance parameters.

    Science.gov (United States)

    Vinklárková, Bára; Chromý, Vratislav; Šprongl, Luděk; Bittová, Miroslava; Rikanová, Milena; Ohnútková, Ivana; Žaludová, Lenka

    2015-01-01

    To select a Kjeldahl procedure suitable for the determination of total protein in reference materials used in laboratory medicine, we reviewed in our previous article Kjeldahl methods adopted by clinical chemistry and found an indirect two-step analysis by total Kjeldahl nitrogen corrected for its nonprotein nitrogen and a direct analysis made on isolated protein precipitates. In this article, we compare both procedures on various reference materials. An indirect Kjeldahl method gave falsely lower results than a direct analysis. Preliminary performance parameters qualify the direct Kjeldahl analysis as a suitable primary reference procedure for the certification of total protein in reference laboratories.

  19. List of unclassified documents by the staff of Metallurgy Division AERE Harwell from August 1980 to July 1982

    International Nuclear Information System (INIS)

    Winkless, M.S.

    1983-01-01

    The contents of the report have been provided by the following groups at AERE Harwell: Fast Reactor Fuels Group, Advanced Systems Group, Fracture Studies Group, Core Components and Structural Materials Group, radiation Effects Group, Composite Materials Group, High Voltage Microscope Group, Fabrication Technology Group and Management and Administration. AERE reports and memoranda are listed first followed by other literature; papers in periodicals, conference and symposia papers and lectures, books, articles and patent specifications. The information given is document type, title, author and date of publication (for papers). A total of 189 documents are listed. (U.K.)

  20. Ocoee Junior High School's Total School Reading Program on a Shoestring.

    Science.gov (United States)

    Hinson, Bess; Williams, Robert W.

    The total school reading program described in this booklet includes a program for remedial, developmental, and special education students. Faculty members and students not participating in this program spend one half hour a day in a silent reading program. The booklet outlines each facet of the program, lists the equipment and materials used,…

  1. List identifies threatened ecosystems

    Science.gov (United States)

    Showstack, Randy

    2012-09-01

    The International Union for Conservation of Nature (IUCN) announced on 9 September that it will develop a new Red List of Ecosystems that will identify which ecosystems are vulnerable or endangered. The list, which is modeled on the group's Red List of Threatened Species™, could help to guide conservation activities and influence policy processes such as the Convention on Biological Diversity, according to the group. “We will assess the status of marine, terrestrial, freshwater, and subterranean ecosystems at local, regional, and global levels,” stated Jon Paul Rodriguez, leader of IUCN's Ecosystems Red List Thematic Group. “The assessment can then form the basis for concerted implementation action so that we can manage them sustainably if their risk of collapse is low or restore them if they are threatened and then monitor their recovery.”

  2. Green Power Partner List

    Science.gov (United States)

    The U.S. EPA's Green Power Partnership is a voluntary program designed to reduce the environmental impact of electricity generation by promoting renewable energy. There are thousands of Green Power Partners, all listed on this page.

  3. Contaminant Candidate List 2

    Data.gov (United States)

    U.S. Environmental Protection Agency — CCL 2 is a list of contaminants that are currently not subject to any proposed or promulgated national primary drinking water regulations, that are known or...

  4. Contaminant Candidate List 3

    Data.gov (United States)

    U.S. Environmental Protection Agency — CCL 3 is a list of contaminants that are currently not subject to any proposed or promulgated national primary drinking water regulations, that are known or...

  5. Contaminant Candidate List 1

    Data.gov (United States)

    U.S. Environmental Protection Agency — CCL 1 is a list of contaminants that are currently not subject to any proposed or promulgated national primary drinking water regulations, that are known or...

  6. License Address List

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Address list generated from National Saltwater Angler Registry. Used in conjunction with an address-based sample as per survey design.

  7. List of publications 1988

    International Nuclear Information System (INIS)

    1989-01-01

    A list is given of reports, articles published in or submitted to journals, theses, conference papers, patents and reports only for internal use, published by the Nuclear Research Institute staff in 1988

  8. Goat production check list

    DEFF Research Database (Denmark)

    Henriksen, Jørgen; Nielsen, Mette Benedicte Olaf; Madsen, Jørgen

    2009-01-01

    This check list, financed by DanChurchAid, highlights all issues should be carefully investigated before investing in distribution of goats and in interventions to assist poor rural communities to improve their livelihood through goat production.......This check list, financed by DanChurchAid, highlights all issues should be carefully investigated before investing in distribution of goats and in interventions to assist poor rural communities to improve their livelihood through goat production....

  9. Dual-energy CT and ceramic or titanium prostheses material reduce CT artifacts and provide superior image quality of total knee arthroplasty.

    Science.gov (United States)

    Kasparek, Maximilian F; Töpker, Michael; Lazar, Mathias; Weber, Michael; Kasparek, Michael; Mang, Thomas; Apfaltrer, Paul; Kubista, Bernd; Windhager, Reinhard; Ringl, Helmut

    2018-06-07

    To evaluate the influence of different scan parameters for single-energy CT and dual-energy CT, as well as the impact of different material used in a TKA prosthesis on image quality and the extent of metal artifacts. Eight pairs of TKA prostheses from different vendors were examined in a phantom set-up. Each pair consisted of a conventional CoCr prosthesis and the corresponding anti-allergic prosthesis (full titanium, ceramic, or ceramic-coated) from the same vendor. Nine different (seven dual-energy CT and two single-energy CT) scan protocols with different characteristics were used to determine the most suitable CT protocol for TKA imaging. Quantitative image analysis included assessment of blooming artifacts (metal implants appear thicker on CT than they are, given as virtual growth in mm in this paper) and streak artifacts (thick dark lines around metal). Qualitative image analysis was used to investigate the bone-prosthesis interface. The full titanium prosthesis and full ceramic knee showed significantly fewer blooming artifacts compared to the standard CoCr prosthesis (mean virtual growth 0.6-2.2 mm compared to 2.9-4.6 mm, p energy CT protocols showed less blooming (range 3.3-3.8 mm) compared to single-energy protocols (4.6-5.5 mm). The full titanium and full ceramic prostheses showed significantly fewer streak artifacts (mean standard deviation 77-86 Hounsfield unit (HU)) compared to the standard CoCr prosthesis (277-334 HU, p energy CT protocols had fewer metal streak artifacts (215-296 HU compared to single-energy CT protocols (392-497 HU)). Full titanium and ceramic prostheses were ranked superior with regard to the image quality at the bone/prosthesis interface compared to a standard CoCr prosthesis, and all dual-energy CT protocols were ranked better than single-energy protocols. Dual-energy CT and ceramic or titanium prostheses reduce CT artifacts and provide superior image quality of total knee arthroplasty at the bone/prosthesis interface

  10. NASA directives master list and index

    Science.gov (United States)

    1995-01-01

    This handbook sets forth in two parts, Master List of Management Directives and Index to NASA Management Directives, the following information for the guidance of users of the NASA Management Directives System. Chapter 1 contains introductory information material on how to use this handbook. Chapter 2 is a complete master list of agencywide management directives, describing each directive by type, number, effective date, expiration date, title, and organization code of the office responsible for the directive. Chapter 3 includes a consolidated numerical list of all delegations of authority and a breakdown of such delegation by the office or center to which special authority is assigned. Chapter 4 sets forth a consolidated list of all NASA handbooks (NHB's) and important footnotes covering the control and ordering of such documents. Chapter 5 is a consolidated list of NASA management directives applicable to the Jet Propulsion Laboratory. Chapter 6 is a consolidated list of NASA regulations published in the Code of Federal Regulations. Chapter 7 is a consolidated list of NASA regulations published in Title 14 of the Code of Federal Regulations. Complementary manuals to the NASA Management Directives System are described in Chapter 8. The second part contains an in depth alphabetical index to all NASA management directives other than handbooks, most of which are indexed by titles only.

  11. Site maps and facilities listings

    International Nuclear Information System (INIS)

    1993-11-01

    In September 1989, a Memorandum of Agreement among DOE offices regarding the environmental management of DOE facilities was signed by appropriate Assistant Secretaries and Directors. This Memorandum of Agreement established the criteria for EM line responsibility. It stated that EM would be responsible for all DOE facilities, operations, or sites (1) that have been assigned to DOE for environmental restoration and serve or will serve no future production need; (2) that are used for the storage, treatment, or disposal of hazardous, radioactive, and mixed hazardous waste materials that have been properly characterized, packaged, and labelled, but are not used for production; (3) that have been formally transferred to EM by another DOE office for the purpose of environmental restoration and the eventual return to service as a DOE production facility; or (4) that are used exclusively for long-term storage of DOE waste material and are not actively used for production, with the exception of facilities, operations, or sites under the direction of the DOE Office of Civilian Radioactive Waste Management. As part of the implementation of the Memorandum of Agreement, Field Offices within DOE submitted their listings of facilities, systems, operation, and sites for which EM would have line responsibility. It is intended that EM facility listings will be revised on a yearly basis so that managers at all levels will have a valid reference for the planning, programming, budgeting and execution of EM activities

  12. Site maps and facilities listings

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    In September 1989, a Memorandum of Agreement among DOE offices regarding the environmental management of DOE facilities was signed by appropriate Assistant Secretaries and Directors. This Memorandum of Agreement established the criteria for EM line responsibility. It stated that EM would be responsible for all DOE facilities, operations, or sites (1) that have been assigned to DOE for environmental restoration and serve or will serve no future production need; (2) that are used for the storage, treatment, or disposal of hazardous, radioactive, and mixed hazardous waste materials that have been properly characterized, packaged, and labelled, but are not used for production; (3) that have been formally transferred to EM by another DOE office for the purpose of environmental restoration and the eventual return to service as a DOE production facility; or (4) that are used exclusively for long-term storage of DOE waste material and are not actively used for production, with the exception of facilities, operations, or sites under the direction of the DOE Office of Civilian Radioactive Waste Management. As part of the implementation of the Memorandum of Agreement, Field Offices within DOE submitted their listings of facilities, systems, operation, and sites for which EM would have line responsibility. It is intended that EM facility listings will be revised on a yearly basis so that managers at all levels will have a valid reference for the planning, programming, budgeting and execution of EM activities.

  13. CO 2 Capture Capacity and Swelling Measurements of Liquid-like Nanoparticle Organic Hybrid Materials via Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy

    KAUST Repository

    Park, Youngjune; Shin, Dolly; Jang, Young Nam; Park, Ah-Hyung Alissa

    2012-01-01

    attenuated total reflectance (ATR) Fourier transform infrared (FT-IR) spectroscopy. Simultaneous measurements of CO 2 capture capacity and swelling behaviors of polyetheramine (Jeffamine M-2070) and its corresponding NOHMs (NOHM-I-PE2070) were reported

  14. The Kjeldahl method as a primary reference procedure for total protein in certified reference materials used in clinical chemistry. I. A review of Kjeldahl methods adopted by laboratory medicine.

    Science.gov (United States)

    Chromý, Vratislav; Vinklárková, Bára; Šprongl, Luděk; Bittová, Miroslava

    2015-01-01

    We found previously that albumin-calibrated total protein in certified reference materials causes unacceptable positive bias in analysis of human sera. The simplest way to cure this defect is the use of human-based serum/plasma standards calibrated by the Kjeldahl method. Such standards, commutative with serum samples, will compensate for bias caused by lipids and bilirubin in most human sera. To find a suitable primary reference procedure for total protein in reference materials, we reviewed Kjeldahl methods adopted by laboratory medicine. We found two methods recommended for total protein in human samples: an indirect analysis based on total Kjeldahl nitrogen corrected for its nonprotein nitrogen and a direct analysis made on isolated protein precipitates. The methods found will be assessed in a subsequent article.

  15. The effect of N-2-cyano-ethylamphetamine. HCl on total lipid contents of placenta and some material and fetal tissues of the rat.

    Science.gov (United States)

    Kulay, L; Oliveira-Filho, R M; Siciliano, S F; Kulay, M N

    1978-12-01

    Female rats received 1.25 mg/kg body weight of N-2-cyano-ethylamphetamine. HCl (Fenproporex chlorhydrate) by oral route, once daily from the 5th to the 21st day of pregnancy, and compared to untreated pregnant rats, showed an increased total lipid content in maternal blood and fetal hearts; liver and heart have had total lipids decrease, while in placenta and fetal livers they were not observed significant differences.

  16. STAFF VACANCY LIST

    CERN Document Server

    Human Resources Division

    2002-01-01

    For economy reasons, it has been decided to stop printing and distributing this list to Staff Members. It can be found on the Web (LIST). Divisional Administrative Officers will receive an updated printed copy on a monthly basis and are asked to display this in a public place in their division. Copies will also be posted on the notice boards of the Administration Building (No. 60) in the glass-fronted cabinet (close to the lifts) and also on the notice board close to the Post Office. A copy will also be given to the Reception (Building No. 33). Human Resources Division Tel. 74606

  17. Iterative List Decoding

    DEFF Research Database (Denmark)

    Justesen, Jørn; Høholdt, Tom; Hjaltason, Johan

    2005-01-01

    We analyze the relation between iterative decoding and the extended parity check matrix. By considering a modified version of bit flipping, which produces a list of decoded words, we derive several relations between decodable error patterns and the parameters of the code. By developing a tree...... of codewords at minimal distance from the received vector, we also obtain new information about the code....

  18. List of participants

    Indian Academy of Sciences (India)

    List of participants. Abbas Sohrab, BARC, Mumbai, India. Achary S N, BARC, Mumbai, India. Acharya Prashant G, JMS College, Ahmedabad, India. Aggarwal S K, BARC, Mumbai, India. Agrawal Ashish, BARC, Mumbai, India. Alam Md Sayem, AMU, Aligarh, India. Alamelu D, BARC, Mumbai, India. Aldona Rajewska, IAE ...

  19. Booster parameter list

    International Nuclear Information System (INIS)

    Parsa, Z.

    1986-10-01

    The AGS Booster is designed to be an intermediate synchrotron injector for the AGS, capable of accelerating protons from 200 MeV to 1.5 GeV. The parameters listed include beam and operational parameters and lattice parameters, as well as parameters pertaining to the accelerator's magnets, vacuum system, radio frequency acceleration system, and the tunnel. 60 refs., 41 figs

  20. List of publications 1990

    International Nuclear Information System (INIS)

    1991-06-01

    AECL Research is engaged in research and development related to the peaceful applications of nuclear energy. Specifically, the company's mission is to perform the research, development, demonstration and marketing required to apply nuclear sciences and their related technologies for the maximum benefit of Canada. Among our most important products are scientific reports, publications and conference presentations. This document lists our publications for 1990

  1. Making Lists, Enlisting Scientists

    DEFF Research Database (Denmark)

    Jensen, Casper Bruun

    2011-01-01

    was the indicator conceptualised? How were notions of scientific knowledge and collaboration inscribed and challenged in the process? The analysis shows a two-sided process in which scientists become engaged in making lists but which is simultaneously a way for research policy to enlist scientists. In conclusion...

  2. The Christmas list

    CERN Multimedia

    James Gillies

    2010-01-01

    List making seems to be among mankind’s favourite activities, particularly as the old year draws to a close and the new one begins. It seems that we all want to know what the top 100 annoying pop songs are, who are the world’s most embarrassing people and what everyone’s been watching on TV. The transition from 2009 to 2010 was no different, but some of the latest batch of lists have a few surprising entries. According to the Global Language Monitor, ‘twitter’ was the top word of 2009. No surprises there, but ‘hadron’ came in at number 8 on the list. ‘King of pop’ was top phrase, according to the same source, but ‘god particle’ came in at number 10. And while ‘Barack Obama’ was the name of the year, ‘Large Hadron Collider’ came in at number four. The Global Language Monitor was not the only organization whose lists included particle physics references. &ls...

  3. Getting on the List

    Science.gov (United States)

    ... to know FAQ Living donation What is living donation? Organs Types Being a living donor First steps Being ... brochures What Every Patient Needs to Know Living Donation Multiple Listing Visit UNOS Store Learn more How organs are matched How to become a living donor ...

  4. 75 FR 34701 - Procurement List; Proposed Additions

    Science.gov (United States)

    2010-06-18

    ...--Scissors, Ladies Sewing; Stainless Steel Coverage: A-List for the Total Government Requirement as... SERVICE, GSA/FSS TOOLS ACQUISITION DIVISION I, KANSAS CITY, MO. Services Service Type/Location: Mess Attendant Service, 185th Air Refueling Wing Dining Hall, 2920 Headquarters Avenue, Sioux City, IA. NPA...

  5. Corrosion of graphitic high temperature reactor materials in steam/helium mixtures at total pessures of 3-55 bar and temperatures of 900-1150 C (1173-1423K)

    International Nuclear Information System (INIS)

    Hinssen, H.K.; Loenissen, K.J.; Katscher, W.; Moormann, R.

    1993-03-01

    In course of accident examination for (HTR), experiments on the corrosion behavior of graphitic reactor materials in steam have been performed a total pressures of 3-55bar and temperatures of 900-1150 C (1173-1423K); these experiments and their evaluation are documented here. Reactor materials examined are the structure graphite V483T2 and the fuel element matrices A3-27 and A3-3. In all experiments, the steam partial pressure was 474mbar (inert gas helium). The dependence of reaction rates and density profiles on burn-off, total pressure and temperature has been examined. Experimental reaction rates depending on burn-off are fitted by theoretical curves, a procedure, which allows rate comparison for a well defined burn-off. Comparing rates as a function of total pressure, V483T2 shows a linear dependence on 1√p total , whereas for matrix materials a pressure independent rate was found for p total 4mm for A3-3. (orig.) [de

  6. Transcatheter embolization of renal neoplasms. A comparison of the merits of the radio-active infarct implant versus total embolization with inert material

    International Nuclear Information System (INIS)

    Lang, E.K.; Pisco, J.M.

    1980-01-01

    Transcatheter embolization with radio-active infarct particles and inert embolic material has been proposed for adjuvant therapy in the management of renal cell carcinoma. Transcatheter embolization with inert embolic material has been advocated in preparation for surgical resection of renal tumours. Embolization with radio-active infarct particles is undertaken to deliver a tumouricidal dose to the primary neoplasm. The resultant interstitial implant offers the advantage of a high dose to the primary tumour, choice of time of delivery of the radiant energy by selection of a radio-isotope with appropriate half-life, and limitation of the integral dose to the patient by selection of appropriate physical characteristics of the radio-isotope utilized. Transcatheter embolization with radio-active infarct particles is advocated either as definitive therapy for clearly inoperable neoplasms, or in hope to make an initially inoperable neoplasm operable. (Auth.)

  7. A study of total measurement error in tomographic gamma scanning to assay nuclear material with emphasis on a bias issue for low-activity samples

    International Nuclear Information System (INIS)

    Burr, T.L.; Mercer, D.J.; Prettyman, T.H.

    1998-01-01

    Field experience with the tomographic gamma scanner to assay nuclear material suggests that the analysis techniques can significantly impact the assay uncertainty. For example, currently implemented image reconstruction methods exhibit a positive bias for low-activity samples. Preliminary studies indicate that bias reduction could be achieved at the expense of increased random error variance. In this paper, the authors examine three possible bias sources: (1) measurement error in the estimated transmission matrix, (2) the positivity constraint on the estimated mass of nuclear material, and (3) improper treatment of the measurement error structure. The authors present results from many small-scale simulation studies to examine this bias/variance tradeoff for a few image reconstruction methods in the presence of the three possible bias sources

  8. PLE in the analysis of plant compounds. Part II: One-cycle PLE in determining total amount of analyte in plant material.

    Science.gov (United States)

    Dawidowicz, Andrzej L; Wianowska, Dorota

    2005-04-29

    Pressurised liquid extraction (PLE) is recognised as one of the most effective sample preparation methods. Despite the enhanced extraction power of PLE, the full recovery of an analyte from plant material may require multiple extractions of the same sample. The presented investigations show the possibility of estimating the true concentration value of an analyte in plant material employing one-cycle PLE in which plant samples of different weight are used. The performed experiments show a linear dependence between the reciprocal value of the analyte amount (E*), extracted in single-step PLE from a plant matrix, and the ratio of plant material mass to extrahent volume (m(p)/V(s)). Hence, time-consuming multi-step PLE can be replaced by a few single-step PLEs performed at different (m(p)/V(s)) ratios. The concentrations of rutin in Sambucus nigra L. and caffeine in tea and coffee estimated by means of the tested procedure are almost the same as their concentrations estimated by multiple PLE.

  9. List of HMI reports

    International Nuclear Information System (INIS)

    1987-01-01

    The Hahn-Meitner-Institute Berlin publishes a series of reports with the results of R+D work of the institute. This list of publications contains also an author index in alphabetical order which points to annual reports of the institute as well as to the reports of the sections of nuclear and radiation physics, nuclear chemistry and reactor, and the section data processing and electronics. With 440 refs [de

  10. Software listing: CHEMTOX database

    International Nuclear Information System (INIS)

    Moskowitz, P.D.

    1993-01-01

    Initially launched in 1983, the CHEMTOX Database was among the first microcomputer databases containing hazardous chemical information. The database is used in many industries and government agencies in more than 17 countries. Updated quarterly, the CHEMTOX Database provides detailed environmental and safety information on 7500-plus hazardous substances covered by dozens of regulatory and advisory sources. This brief listing describes the method of accessing data and provides ordering information for those wishing to obtain the CHEMTOX Database

  11. High-Risk List

    Science.gov (United States)

    2017-01-01

    economy. The World Bank has said that “corruption creates an unfavorable business environment by undermining the operation efficiency of firms and... Bank Began as ‘Ponzi Scheme,’” 11/27/2012. 64 Independent Joint Anti-Corruption Monitoring and Evaluation Committee, Unfinished Business : The Follow...HIGH RISK AREA 7: Oversight 51 HIGH-RISK AREA 8: Strategy and Planning 55 CONCLUSION HIGH RISK LIST I JANUARY 11, 2017 2 EXECUTIVE SUMMARY

  12. Marker list - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ...Database Site Policy | Contact Us Marker list - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

  13. QTL list - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ...Policy | Contact Us QTL list - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

  14. 15 CFR 230.7 - Description of services and list of fees, incorporation by reference.

    Science.gov (United States)

    2010-01-01

    ... STANDARD REFERENCE MATERIALS STANDARD REFERENCE MATERIALS Description of Services and List of Fees § 230.7 Description of services and list of fees, incorporation by reference. (a) The text of NIST Special Publication... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Description of services and list of...

  15. Determination of total ribonucleotide pool in plant materials by high-pH anion-exchange high-performance liquid chromatography following extraction with potassium hydroxide.

    Science.gov (United States)

    Riondet, Christophe; Morel, Sylvain; Alcaraz, Gérard

    2005-06-10

    A new, improved method that only requires a potassium hydroxide extraction procedure is presented for the analysis of a full nucleotide pool in plant materials. Quantification was performed by high-pH anion-exchange chromatography (HPAEC) with UV detection after a potassium hydroxide extraction, and allowed the quantification of 13 linear ribonucleotides in a single run. The method has been validated by comparison of six extraction methods and also by measurement of the intracellular nucleotide levels of three plant species (cell cultures and leaves). The evolution of the nucleotide pool of Nicotiana tabacum cell culture during growth has also been measured, and showed an increase in the pool until the fifth day, where the growth rate reaches a maximum, after which a decrease was observed.

  16. Certification of total arsenic in blood and urine standard reference materials by radiochemical neutron activation analysis and inductively coupled plasma-mass spectrometry

    International Nuclear Information System (INIS)

    Paul, R.L.; Clay Davis, W.; Lee Yu; Murphy, K.E.; Bryan, C.E.; Vetter, T.W.; Guthrie, W.F.; Leber, D.D.; Gulchekhra Shakirova; Graylin Mitchell

    2014-01-01

    Radiochemical neutron activation analysis (RNAA) was used to measure arsenic at four levels in standard reference material (SRM) 955c Toxic Elements in Caprine Blood and at two levels in SRM 2668 Toxic Elements in Frozen Human Urine for the purpose of providing mass concentration values for certification. Samples were freeze-dried prior to analysis followed by neutron irradiation for 3 h at a fluence rate of 1 × 10 14 cm -2 s -1 . After sample dissolution in perchloric and nitric acids, arsenic was separated from the matrix either by retention on hydrated manganese dioxide (urine) or by extraction into zinc diethyldithiocarbamate in chloroform (blood). 76 As was quantified by gamma-ray spectroscopy. Differences in chemical yield and counting geometry between samples and standards were monitored by measuring the count rate of a 77 As tracer added before sample dissolution. RNAA results were combined with inductively coupled plasma-mass spectrometry values from National Institute of Standards and Technology and collaborating laboratories to provide certified values of 10.81 ± 0.54 and 213.1 ± 0.73 μg/L for SRM 2668 Levels I and II, and certified values of 21.66 ± 0.73, 52.7 ± 1.1, and 78.8 ± 4.9 μg/L for SRM 955c Levels II-IV, respectively. Because of discrepancies between values obtained by different methods for SRM 955c Level I, an information value of <5 μg/L was assigned for this material. (author)

  17. The STAPL pList

    KAUST Repository

    Tanase, Gabriel; Xu, Xiabing; Buss, Antal; Harshvardhan,; Papadopoulos, Ioannis; Pearce, Olga; Smith, Timmie; Thomas, Nathan; Bianco, Mauro; Amato, Nancy M.; Rauchwerger, Lawrence

    2010-01-01

    We present the design and implementation of the stapl pList, a parallel container that has the properties of a sequential list, but allows for scalable concurrent access when used in a parallel program. The Standard Template Adaptive Parallel

  18. NOAA Weather Radio - Station Listing

    Science.gov (United States)

    Non-Zero All Hazards Logo Emergency Alert Description Event Codes Fact Sheet FAQ Organization Search COVERAGE County Coverage Listings State Coverage Listings NWR Station Search Maps SAME SAME Coding Using

  19. Benefits from Funding the MSD Engineering List: A Fiscal Year 1999 Case Study

    National Research Council Canada - National Science Library

    Gehrich, David

    2004-01-01

    Every year the Air Force Material Command (AFMC) funds the MSD Engineering list. The projects on the list are submitted by the Air Logistic Centers in order to address problems with the maintainability or reliability of a reparable part...

  20. List manipulation in Turbo Prolog

    Directory of Open Access Journals (Sweden)

    V.Cotelea

    1995-06-01

    Full Text Available The present paper is concerned with list processing in Turbo Prolog language. It doesn't claim to be an exhaustive description of operations which can be performed upon lists. Nevertheless adduced programs are most representative, more or less known to specialists in logic programming domain. By means of examples are explained the list manipulation techniques, use of recursion, declarative comparison of predicates, analysis and fixation of acceptable prototypes and some problems of predicates' inconsistency. Index terms. Prolog, list, recursion.

  1. Listed waste determination report

    International Nuclear Information System (INIS)

    1993-06-01

    On September 23, 1988, the US Environmental Protection Agency (EPA) published a notice clarifying interim status requirements for the management of radioactive mixed waste thereby subjecting the Idaho National Engineering Laboratory (INEL) and other applicable Department of Energy (DOE) sites to regulation under the Resource Conservation and Recovery Act (RCRA). Therefore, the DOE was required to submit a Part A Permit application for each treatment, storage, and disposal (TSD) unit within the INEL, defining the waste codes and processes to be regulated under RCRA. The September 1990 revised Part A Permit application, that was approved by the State of Idaho identified 101 potential acute and toxic hazardous waste codes (F-, P-, and U- listed wastes according to 40 CFR 261.31 and 40 CFR 261.33) for some TSD units at the Idaho Chemical Processing Plant. Most of these waste were assumed to have been introduced into the High-level Liquid Waste TSD units via laboratory drains connected to the Process Equipment Waste (PEW) evaporator (PEW system). At that time, a detailed and systematic evaluation of hazardous chemical use and disposal practices had not been conducted to determine if F-, P-, or Unlisted waste had been disposed to the PEW system. The purpose of this investigation was to perform a systematic and detailed evaluation of the use and disposal of the 101 F-, P-, and Unlisted chemicals found in the approved September 1990 Part A Permit application. This investigation was aimed at determining which listed wastes, as defined in 40 CFR 261.31 (F-listed) and 261.33 (P ampersand Unlisted) were discharged to the PEW system. Results of this investigation will be used to support revisions to the RCRA Part A Permit application

  2. Title list of documents made publicly available

    International Nuclear Information System (INIS)

    1994-06-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index

  3. Title list of documents made publicly available

    International Nuclear Information System (INIS)

    1982-03-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index

  4. REVIEWER LIST – 2014

    OpenAIRE

    Chief Editor

    2014-01-01

    REVIEWER LIST – 2014 The Editorial Team would like to thank all those who gave generously of their time and expertise in reviewing the papers for the Indian Journal of Community Health in 2014.AAarti Kapil, New Delhi, IndiaAbhishek SinghAmandeep Kaur, Haldwani, IndiaAmit Kaushik, Safai, IndiaAnu Bhardwaj, Ambala, IndiaAnurag Chaudary, Ludhiana, IndiaA R BondArpan YagnikArvind Kumar Singh, Gorakhpur, IndiaAshish Yadav, Meerut, IndiaAthar Ansari, Aligarh, India BBaridalyne Nongkynrih, New Delhi...

  5. Total Thyroidectomy

    Directory of Open Access Journals (Sweden)

    Lopez Moris E

    2016-06-01

    Full Text Available Total thyroidectomy is a surgery that removes all the thyroid tissue from the patient. The suspect of cancer in a thyroid nodule is the most frequent indication and it is presume when previous fine needle puncture is positive or a goiter has significant volume increase or symptomes. Less frequent indications are hyperthyroidism when it is refractory to treatment with Iodine 131 or it is contraindicated, and in cases of symptomatic thyroiditis. The thyroid gland has an important anatomic relation whith the inferior laryngeal nerve and the parathyroid glands, for this reason it is imperative to perform extremely meticulous dissection to recognize each one of these elements and ensure their preservation. It is also essential to maintain strict hemostasis, in order to avoid any postoperative bleeding that could lead to a suffocating neck hematoma, feared complication that represents a surgical emergency and endangers the patient’s life.It is essential to run a formal technique, without skipping steps, and maintain prudence and patience that should rule any surgical act.

  6. NASA directives: Master list and index

    Science.gov (United States)

    1994-01-01

    This Handbook sets forth in two parts the following information for the guidance of users of the NASA Management Directives System. Chapter 1 contains introductory information material on how to use this Handbook. Chapter 2 is a complete master list of Agency-wide management directives, describing each directive by type, number, effective date, expiration date, title, and organization code of the office responsible for the directive. Chapter 3 includes a consolidated numerical list of all delegations of authority and a breakdown of such delegation by the office of Installation to which special authority is assigned. Chapter 4 sets forth a consolidated list of all NASA Handbooks (NHB's) and important footnotes covering the control and ordering of such documents. Chapter 5 is a consolidated list of NASA management directives applicable to the Jet Propulsion Laboratory. Chapter 6 is a consolidated list of NASA management directives published in the code of Federal Regulations. Complementary manuals to the NASA Management Directives System are described in Chapter 7. Part B contains an in-depth alphabetical index to all NASA management directives other than Handbooks.

  7. Registered plant list - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ...the Plant DB link list in simple search page) Genome analysis methods Presence or... absence of Genome analysis methods information in this DB (link to the Genome analysis methods information ...base Site Policy | Contact Us Registered plant list - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

  8. TQM: A bibliography with abstracts. [total quality management

    Science.gov (United States)

    Gottlich, Gretchen L. (Editor)

    1992-01-01

    This document is designed to function as a special resource for NASA Langley scientists, engineers, and managers during the introduction and development of total quality management (TQM) practices at the Center. It lists approximately 300 bibliographic citations for articles and reports dealing with various aspects of TQM. Abstracts are also available for the majority of the citations. Citations are organized by broad subject areas, including case studies, customer service, senior management, leadership, communication tools, TQM basics, applications, and implementation. An introduction and indexes provide additional information on arrangement and availability of these materials.

  9. A Dictionary of Basic Pashto Frequency List I, Project Description and Samples, and Frequency List II.

    Science.gov (United States)

    Heston, Wilma

    The three-volume set of materials describes and presents the results to date of a federally-funded project to develop Pashto-English and English-Pashto dictionaries. The goal was to produce a list of 12,000 basic Pashto words for English-speaking users. Words were selected based on frequency in various kinds of oral and written materials, and were…

  10. Results of monitoring at Olkiluoto in 2008. Foreign Materials

    International Nuclear Information System (INIS)

    Juhola, P.

    2009-08-01

    This report focuses on foreign materials introduced to ONKALO. These foreign materials are not part of the multi-barrier system or the natural environment. All the allowed materials introduced to ONKALO are included in the material handbook. All materials used in ONKALO 2008 are listed in this report. During 2008 the ONKALO access tunnel was excavated from chainage 2581 to chainage 3307 and the total excavated volume in 2008 was 38812 m 3 . During 2004 to 2008 the total excavated volume was 161060 m 3 . This report also summaries the total amount of foreign materials used in ONKALO since 2004. All waters used during the excavation of ONKALO are pumped up to the surface into a sedimentation pool. In 2008 water samples were taken from sedimentation pool and from the outlet ditch. The chemistry of these waters can predict us how the use of foreign materials has affected to the baseline groundwater chemistry. (orig.)

  11. Results of monitoring at Olkiluoto in 2011. Foreign materials

    International Nuclear Information System (INIS)

    Salo, V.

    2013-06-01

    This report focuses on foreign materials introduced to ONKALO. These foreign materials are not part of the engineered multi-barrier system or the natural environment. All the allowed materials introduced to ONKALO are included in the material handbook. All materials used in ONKALO 2011 are listed in this report. During 2011 the ONKALO access tunnel was excavated from the chainage of 4570 to the chainage of 4913 and the total excavated volume in 2011 was 77750 m 3 . During the years from 2004 to 2011 the total excavated volume was 305240 m 3 . This report also summaries the total amount of foreign materials used in ONKALO since 2004. All waters used during the excavation of ONKALO have been pumped up to the surface into a sedimentation pool. In 2011 water samples were taken from sedimentation pool and from the outlet ditch. The chemistry of these waters can indicate us how the foreign materials have effected on the undisturbed groundwater chemistry. (orig.)

  12. Results of monitoring at Olkiluoto in 2010. Foreign materials

    International Nuclear Information System (INIS)

    Salo, V.

    2012-11-01

    This report focuses on foreign materials introduced to ONKALO. These foreign materials are not part of the engineered multi-barrier system or the natural environment. All the allowed materials introduced to ONKALO are included in the material handbook. All materials used in ONKALO 2010 are listed in this report. During 2010 the ONKALO access tunnel was excavated from the chainage of 4059 to the chainage of 4570 and the total excavated volume in 2010 was 29652 m 3 . During the years from 2004 to 2010 the total excavated volume was 227490 m 3 . This report also summaries the total amount of foreign materials used in ONKALO since 2004. All waters used during the excavation of ONKALO have been pumped up to the surface into a sedimentation pool. In 2010 water samples were taken from sedimentation pool and from the outlet ditch. The chemistry of these waters can indicate us how the foreign materials have effected on the undisturbed groundwater chemistry. (orig.)

  13. Taxon lists for studies of modern nannoplankton

    DEFF Research Database (Denmark)

    Jordan, R.W.; Broerse, A.T.C.; Hagino, K.

    2000-01-01

    Six studies in this special issue dealt with modern nannoplankton assemblages. In total during these studies 552 samples were analysed and about 180,000 specimens identified, from 152 species. This paper provides a unified list of taxa from these studies, records the presence/absence of each...... species across the studies and indicates the more common species. Comparison of results indicates a high level of consensus on taxonomy and a high commonality of the floras. (C) 2000 Elsevier Science B.V....

  14. Uncertainty measurement evaluation of WDXRF and EDXRF techniques for the Si and U{sub total} determination in U{sub 3}Si{sub 2} used as nuclear fuel material

    Energy Technology Data Exchange (ETDEWEB)

    Scapin, Marcos A.; Salvador, Vera L.R.; Cotrim, Marycel E.B.; Pires, Maria Ap. F.; Sato, Ivone M., E-mail: mascapin@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP) Sao Paulo, SP (Brazil). Centro de Quimica e Meio Ambiente

    2009-07-01

    Uranium silicide (U{sub 3}Si{sub 2}), 20% {sup 235}U enriched powder, is an intermetallic compound used as nuclear fuel material; that is the state-of-the-art among nuclear fuel materials used in modern research reactors. It is produced by IPEN and used as nuclear fuel of the IEA-R1 reactor (IPEN/CNEN, Sao Paulo, Brazil); U{sub 3}Si{sub 2} has 92.3%wtU and 7.7%wtSi. The qualification of this material requires chemical and physical tests such as Si and U{sub total} content, isotope ratio, impurities, density, specific surface area and particle size determination. The Si and U{sub total} determination were made by gravimetric and volumetric procedures at the Environment Chemistry Center (CQMA-IPEN/CNEN). Usually, these classical methods require a long time for analyses and are expensive. The objective of this study was to establish a fast and efficient analytical method to meet ISO/IEC 17025:2005 requirements in the Si and U{sub total} determination. The X-ray fluorescence techniques (XRF) were chosen to allow a direct and non-destructive testing, what is a principal advantage faced to other instrumental techniques, since previous chemical treatments are not necessary. In this study, the performance of the wavelength dispersive (WDXRF) and energy dispersive (EDXRF) X- ray fluorescence techniques was evaluated. Furthermore, two different sample preparation procedures, plain powdered and pressed powdered were evaluated. Statistical tools were used to evaluate the results and a comparison between these results and the conventional methods was done. (author)

  15. TOTAL user manual

    Science.gov (United States)

    Johnson, Sally C.; Boerschlein, David P.

    1994-01-01

    Semi-Markov models can be used to analyze the reliability of virtually any fault-tolerant system. However, the process of delineating all of the states and transitions in the model of a complex system can be devastatingly tedious and error-prone. Even with tools such as the Abstract Semi-Markov Specification Interface to the SURE Tool (ASSIST), the user must describe a system by specifying the rules governing the behavior of the system in order to generate the model. With the Table Oriented Translator to the ASSIST Language (TOTAL), the user can specify the components of a typical system and their attributes in the form of a table. The conditions that lead to system failure are also listed in a tabular form. The user can also abstractly specify dependencies with causes and effects. The level of information required is appropriate for system designers with little or no background in the details of reliability calculations. A menu-driven interface guides the user through the system description process, and the program updates the tables as new information is entered. The TOTAL program automatically generates an ASSIST input description to match the system description.

  16. The Total Quality Movement in Education.

    Science.gov (United States)

    Leuenberger, John A.; Whitaker, Sheldon V., Jr.

    The total quality movement began as a result of the desire of W. Edwards Deming, an American statistician, to permit the economic system to maintain its edge in a growing global market. The 14 points Deming listed as essential to "total quality management" have recently been adapted to the field of education. The success of the total…

  17. The STAPL pList

    KAUST Repository

    Tanase, Gabriel

    2010-01-01

    We present the design and implementation of the stapl pList, a parallel container that has the properties of a sequential list, but allows for scalable concurrent access when used in a parallel program. The Standard Template Adaptive Parallel Library (stapl) is a parallel programming library that extends C++ with support for parallelism. stapl provides a collection of distributed data structures (pContainers) and parallel algorithms (pAlgorithms) and a generic methodology for extending them to provide customized functionality. stapl pContainers are thread-safe, concurrent objects, providing appropriate interfaces (e.g., views) that can be used by generic pAlgorithms. The pList provides stl equivalent methods, such as insert, erase, and splice, additional methods such as split, and efficient asynchronous (non-blocking) variants of some methods for improved parallel performance. We evaluate the performance of the stapl pList on an IBM Power 5 cluster and on a CRAY XT4 massively parallel processing system. Although lists are generally not considered good data structures for parallel processing, we show that pList methods and pAlgorithms (p-generate and p-partial-sum) operating on pLists provide good scalability on more than 103 processors and that pList compares favorably with other dynamic data structures such as the pVector. © 2010 Springer-Verlag.

  18. The advisory list for selvclassification of dangerous substances

    DEFF Research Database (Denmark)

    Niemelä, Jay Russell; Wedebye, Eva Bay; Nikolov, Nikolai Georgiev

    All chemical substances marketed in the EU must be classified and labelled according to the regulation on classification and labelling of dangerous substances (7). Substances with harmonised classifications adopted in the EU are to be found on the List of harmonised classification and labelling...... this issue, the Danish Environmental Protection Agency published the Advisory Self-classification List /5/. This report describes the updating of this list. The Advisory Self-Classification list is created by the use of (Q)SARs ((Quantitative) Structure-Activity Relationships) to predict the effects...... Skin sensitisation The updated advisory list is available as an Excel file for download from DK-EPA's website and as an online searchable database. This includes the 23,922 chemicals with new advisory classifications resulting from this project, making in all, a total of 30,179 chemicals with advisory...

  19. License - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ...t list, Marker list, QTL list, Plant DB link & Genome analysis methods © Satoshi ... Policy | Contact Us License - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

  20. Development of analytical procedures for determination of total chromium by quadrupole ICP-MS and high-resolution ICP-MS, and hexavalent chromium by HPLC-ICP-MS, in different materials used in the automotive industry.

    Science.gov (United States)

    Séby, F; Gagean, M; Garraud, H; Castetbon, A; Donard, O F X

    2003-10-01

    A European directive was recently adopted limiting the use of hazardous substances such as Pb, Hg, Cd, and Cr(VI) in vehicle manufacturing. From July 2003 a maximum of 2 g Cr(VI) will be authorised per vehicle in corrosion-preventing coatings of key components. As no standardised procedures are available to check if produced vehicles are in agreement with this directive, the objective of this work was to develop analytical procedures for total chromium and Cr(VI) determination in these materials. The first step of this study was to optimise digestion procedures for total chromium determination in plastic and metallic materials by inductively coupled plasma mass spectrometry (ICP-MS). High resolution (HR) ICP-MS was used to examine the influence of polyatomic interferences on the detection of the (52)Cr(+) and (53)Cr(+) isotopes. If there was strong interference with m/ z 52 for plastic materials, it was possible to use quadrupole ICP-MS for m/ z 53 if digestions were performed with HNO(3)+H(2)O(2). This mixture was also necessary for digestion of chromium from metallic materials. Extraction procedures in alkaline medium (NH(4)(+)/NH(3) buffer solution at pH 8.9) assisted by sonication were developed for determining Cr(VI) in four different corrosion-preventing coatings by HPLC-ICP-MS. After optimisation and validation with the only solid reference material certified for its Cr(VI) content (BCR 545; welding dusts), the efficiency of this extraction procedure for screw coatings was compared with that described in the EN ISO 3613 standard generally used in routine laboratories. For coatings comprising zinc and aluminium passivated in depth with chromium oxides the extraction procedure developed herein enabled determination of higher Cr(VI) concentrations. This was also observed for the screw covered with a chromium passivant layer on zinc-nickel. For coating comprising a chromium passivant layer on alkaline zinc the standardized extraction procedure was more efficient

  1. Title III List of Lists -- Raw Data Set

    Data.gov (United States)

    U.S. Environmental Protection Agency — This list was prepared to help firms handling chemicals determine whether they need to submit reports under sections 302, 304, or 313 of the Emergency Planning and...

  2. Stable isotope customer list and summary of shipments: FY 1975

    International Nuclear Information System (INIS)

    Davis, W.C.

    1975-10-01

    This compilation is published as an aid to those concerned with the separation and sale of stable isotopes. The information is divided into four sections: an alphabetical list of domestic and foreign customers, showing the stable isotopes purchased during the fiscal year; an alphabetical list of isotopes, cross-referenced to customer numbers and divided into domestic and foreign categories; an alphabetical list of states and countries, cross-referenced to customer numbers and indicating geographical concentrations of isotope users; and a tabulation of the shipments, quantities, and dollars for domestic, foreign, and project categories for each isotope, with the totals for loaned isotopes shown at the end of the table. (auth)

  3. On a List of Priests

    DEFF Research Database (Denmark)

    Isager, Signe

    2014-01-01

    The article concerns the fate of an often cited list of priests for Poseidon, which at some point was established and cut into a stele in ancient Halikarnassos. The list could be considered the genealogical table of Halikarnassos: The cult of Poseidon was founded by colonists from Troizen...... and the first priest on the list was a son of the god Poseidon himself. This could be read from the inscription on a new stele to which it was decided to transfer all the names on the first stele in the Late Hellenistic Period. The article presents two new documents for future discussions on when, why...

  4. Clinical Investigator Inspector List (CLIIL)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Clinical Investigator Inspection List (CLIIL) contains names, addresses, and other pertinent information gathered from inspections of clinical investigators who...

  5. #DDOD: Establishment Registration & Device Listing

    Data.gov (United States)

    U.S. Department of Health & Human Services — SUMMARY DDOD use case to request means on consolidating multiple data sources (MDR, PMA, 510(k), R&L) in order to build a list of all marketed medical devices....

  6. Total Logistic Plant Solutions

    Directory of Open Access Journals (Sweden)

    Dusan Dorcak

    2016-02-01

    Full Text Available The Total Logistics Plant Solutions, plant logistics system - TLPS, based on the philosophy of advanced control processes enables complex coordination of business processes and flows and the management and scheduling of production in the appropriate production plans and planning periods. Main attributes of TLPS is to create a comprehensive, multi-level, enterprise logistics information system, with a certain degree of intelligence, which accepts the latest science and research results in the field of production technology and logistics. Logistic model of company understands as a system of mutually transforming flows of materials, energy, information, finance, which is realized by chain activities and operations

  7. Top of the list

    International Nuclear Information System (INIS)

    Cameron, A.; Vries, E. de

    2006-01-01

    In this article the authors look at how the major turbine suppliers fared in the year 2005, and look forward to 2006 which could be the best ever for the wind industry. The world wind turbine market continues to be dominated by ten major companies, who together account for almost 100% of the total global market. Although there are some new companies on the horizon it is the ten major companies that the authors concentrate on, in particular the top three, Vestas, Gamesa and Enercon who between them control 66% of the market. They give their overall report on business in 2005 and give their predictions for 2006. By far the leading wind turbine supplier is the Danish Company Vestas, accounting for over 30% of the global market. However all of the top ten companies report a successful year and all are expecting an even better 2006. This paper also reports on potential newcomers to the industry, one of these is California-based Clipper Windpower which commenced manufacturing the 2.5 MW Liberty turbine in Iowa. Chinese manufacturer Goldwind is also looking to enter the market having acquired a licence to produce the Vensys 1.2 MW turbine. It may well be that changes are on the way, there will be jockeying for position at the top and newcomers will want to make an impression on the market

  8. Avanços nos materiais e no tratamento endovascular de oclusões arteriais crônicas totais: um relato de caso Advances in materials and endovascular treatment of chronic total arterial occlusions: a case report

    Directory of Open Access Journals (Sweden)

    Daniel Queiroz Neves

    2012-09-01

    Full Text Available As oclusões arteriais crônicas totais com forte componente cálcico são ainda nos dias atuais, um fator muitas vezes limitante para o tratamento endovascular devido à dificuldade em transpor estas lesões com fios-guia e cateteres habitualmente utilizados. Revisamos a literatura e descrevemos um caso de tratamento endovascular de uma oclusão total de artéria ilíaca externa, onde o uso de novos materiais desenvolvidos especificamente para o tratamento deste tipo de lesão foi determinante para o sucesso do caso.Chronic arterial occlusions with great calcium component are usually a factor of limitation to endovascular treatment to the difficulty to transpose these lesions with guidewires and catheters commonly used. We reviewed the literature and described a case of endovascular treatment of a total occlusion of external iliac artery, where the use of new materials developed specifically to the treatment of such injuries was critical to the success of the case.

  9. Validation and dosimetric evaluation employing the techniques of TL and OSL of thermoluminescent materials for application in the dosimetry of clinical beams of electrons used in total irradiation of the skin - TSI

    International Nuclear Information System (INIS)

    Almeida, Shirlane Barbosa de

    2017-01-01

    In vivo dosimetry has become an important role for the treatment of total skin irradiation within a rigorous quality assurance program that should be an integral part of the radiotherapy departments. TSI dosimetry is difficult because of the complexity of the treatment in assessing dose uniformity and measuring the dose absorbed at shallow depths throughout the skin surface extent, resulting in a wide variation in dose distribution. The TLDs have proven to be very useful for the distribution and verification of the dose prescribed for the patient as the dose may differ from place to place due to patient body geometry, overlapping of structures and asymmetries of the radiation field. The use of TLDs in vivo can identify variations in the prescribed dose because its measurement accuracy and great precision. Several types of dosimeters have been used in the radiotherapy sectors, the most commonly used are Lithium Fluride (TLD-100), where it obtains a long history in this type of application. New dosimetric materials have gained great importance in the dosimetry of clinical electron beams, such as Dysprosium-doped Calcium Sulphate (TL) and Carbon doped (OSL) based Aluminum Oxide, This work evaluates the performance of the respective thermoluminescent dosimeters and the optically stimulated luminescence in the dosimetry of clinical electron beams used in total irradiation of the skin. (author)

  10. List of Posters

    Science.gov (United States)

    List of Posters: Dark matter annihilation in the Galactic galo, by Dokuchaev Vyacheslav, et al. NEMO developments towards km3 telescope in the Mediterranean Sea. The NEMO project. Neutrino Mediterranean Observatory By Antonio Capone, NEMO Collaboration. Alignment as a result from QCD jet production or new still unknown physics at LHC? By Alexander Snigirev. Small-scale fluctuations of extensive air showers: systematics in energy and muon density estimation By Grigory Rubtsov. SHINIE: Simulation of High-Energy Neutrino Interacting with the Earth By Lin Guey-Lin, et al.. Thermodynamics of rotating solutions in n+1 dimensional Einstein - Maxwell -dilation gravity By Ahmad Sheykhi, et al.. Supernova neutrino physics with future large Cherenkov detectors By Daniele Montanino. Crossing of the Cosmological Constant Barrier in the string Inspired Dark Energy Model By S. Yu. Vernov. Calculations of radio signals produced by ultra-high and extremely high energy neutrino induced cascades in Antarctic ice By D. Besson, et al.. Inflation, Cosmic Acceleration and string Gravity By Ischwaree Neupane. Neutrino Physics: Charm and J/Psi production in the atmosphere By Liudmila Volkova. Three generation flavor transitions and decays of supernova relic neutrinos By Daniele Montanino. Lattice calculations & computational quantum field theory: Sonification of Quark and Baryon Spectra By Markum Harald, et al.. Generalized Kramers-Wannier Duality for spin systems with non-commutative symmetry By V. M. Buchstaber, et al.. Heavy ion collisions & quark matter: Nuclear matter jets and multifragmentation By Danut Argintaru, et al.. QCD hard interactions: The qT-spectrum of the Higgs and Slepton-pairs at the LHC By Guiseppe Bozzi. QCD soft interactions: Nonperturbative effects in Single-Spin Asymmetries: Instantons and TMD-parton distributions By Igor Cherednikov, et al.. Gluon dominance model and high multiplicity By Elena Kokoulina. Resonances in eta pi- pi- pi+ system By Dmitry Ryabchikov

  11. Automation of a problem list using natural language processing

    Directory of Open Access Journals (Sweden)

    Haug Peter J

    2005-08-01

    Full Text Available Abstract Background The medical problem list is an important part of the electronic medical record in development in our institution. To serve the functions it is designed for, the problem list has to be as accurate and timely as possible. However, the current problem list is usually incomplete and inaccurate, and is often totally unused. To alleviate this issue, we are building an environment where the problem list can be easily and effectively maintained. Methods For this project, 80 medical problems were selected for their frequency of use in our future clinical field of evaluation (cardiovascular. We have developed an Automated Problem List system composed of two main components: a background and a foreground application. The background application uses Natural Language Processing (NLP to harvest potential problem list entries from the list of 80 targeted problems detected in the multiple free-text electronic documents available in our electronic medical record. These proposed medical problems drive the foreground application designed for management of the problem list. Within this application, the extracted problems are proposed to the physicians for addition to the official problem list. Results The set of 80 targeted medical problems selected for this project covered about 5% of all possible diagnoses coded in ICD-9-CM in our study population (cardiovascular adult inpatients, but about 64% of all instances of these coded diagnoses. The system contains algorithms to detect first document sections, then sentences within these sections, and finally potential problems within the sentences. The initial evaluation of the section and sentence detection algorithms demonstrated a sensitivity and positive predictive value of 100% when detecting sections, and a sensitivity of 89% and a positive predictive value of 94% when detecting sentences. Conclusion The global aim of our project is to automate the process of creating and maintaining a problem

  12. List of the world's nuclear power plants

    International Nuclear Information System (INIS)

    Kempken, M.

    1984-01-01

    This list published once a year presents, subdivided into countries, data on all nuclear power plants in operation, under construction, or for which a contract has been placed, referring to the following aspects: Year the contract has been placed, name and/or size, owner or operator, design type, manufacturers, net output, first year of commercial operation, and total electricity output up to the data June 30, 1984. Two additional tables present a survey on the world's nuclear power plants, also grouped by countries, and the largest commercially used nuclear power plants of the world. (UA) [de

  13. Materials Department annual report for 1994

    Energy Technology Data Exchange (ETDEWEB)

    Horsewell, A; Hansen, N

    1995-04-01

    The annual report describes the work of the Materials Department at Risoe National Laboratory during 1994. The work is presented in three main chapters: Materials Science, Materials Engineering and Materials Technology. The report includes lists of staff members, guests, post docs and PhD students. There are detailed lists of the published work which has resulted from the projects. (au) (37 ills.).

  14. Materials Department annual report for 1995

    Energy Technology Data Exchange (ETDEWEB)

    Soerensen, B.F.; Hansen, N. [eds.

    1996-04-01

    The annual report describes the work of the Materials Department at Risoe National Laboratory during 1995. The work is presented in three main chapters: Materials Science, Materials Engineering and Materials Technology. The report includes lists of staff members, guests, post docs and PhD students. There are detailed lists of the published work which has resulted from the projects. (au) 53 ills.

  15. Materials Department annual report for 1994

    International Nuclear Information System (INIS)

    Horsewell, A.; Hansen, N.

    1995-04-01

    The annual report describes the work of the Materials Department at Risoe National Laboratory during 1994. The work is presented in three main chapters: Materials Science, Materials Engineering and Materials Technology. The report includes lists of staff members, guests, post docs and PhD students. There are detailed lists of the published work which has resulted from the projects. (au) (37 ills.)

  16. Materials Department annual report for 1995

    International Nuclear Information System (INIS)

    Soerensen, B.F.; Hansen, N.

    1996-04-01

    The annual report describes the work of the Materials Department at Risoe National Laboratory during 1995. The work is presented in three main chapters: Materials Science, Materials Engineering and Materials Technology. The report includes lists of staff members, guests, post docs and PhD students. There are detailed lists of the published work which has resulted from the projects. (au) 53 ills

  17. Computer modeling of nuclide adsorption on geologic materials

    International Nuclear Information System (INIS)

    Silva, R.J.; White, A.R.; Yee, A.W.

    1980-07-01

    A computer program, called MINEQL, has been developed and is being tested for use in predicting the distribution of radionuclides between solid and aqueous species for a variety of geologic materials and solution conditions. MINEQL is designed to accept a list of components of a system (electrolytes, solid substrates and radionuclides) and their total analytical concentrations, solve the appropriate set of mass balance and equilibrium expressions, and produce a list of the identities and concentrations of all species formed by interactions among the components and between them and/or water

  18. Programming list processes. SLIP: symmetric list processor - applications

    International Nuclear Information System (INIS)

    Broudin, Y.

    1966-06-01

    Modern aspects of programming languages are essentially turned towards list processing. The ordinary methods of sequential treatment become inadequate and we must substitute list processes for them, where the cells of a group have no neighbourhood connection, but where the address of one cell is contained in the preceding one. These methods are required in 'time sharing' solving problems. They also allow us to treat new problems and to solve others in the shortest time. Many examples are presented after an abstract of the most usual list languages and a detailed study of one of them : SLIP. Among these examples one should note: locating of words in a dictionary or in a card index, treatment of non numerical symbols, formal derivation. The problems are treated in Fortran II on an IBM 7094 machine. The subroutines which make up the language are presented in an appendix. (author) [fr

  19. Creating a Total Object of Art.

    Science.gov (United States)

    Klie, Evelyn Busch

    2003-01-01

    Discusses a workshop that accompanied the author's exhibit, "A Sense of Place: Paintings by Evelyn Busch Klie." Explains that students created a watercolor painting and a clay frame or base with details in it. Includes a list of art materials and learning objectives. (CMK)

  20. Property Testing on Linked Lists

    DEFF Research Database (Denmark)

    Afshani, Peyman; Matulef, Kevin; Wilkinson, Bryan Thomas

    2013-01-01

    We define a new property testing model for algorithms that do not have arbitrary query access to the input, but must instead traverse it in a manner that respects the underlying data structure in which it is stored. In particular, we consider the case when the underlying data structure is a linked...... list, and the testing algorithm is allowed to either sample randomly from the list, or walk to nodes that are adjacent to those already visited. We study the well-known monotonicity testing problem in this model, and show that (n13) queries are both necessary and sufficient to distinguish whether...... a list is sorted (monotone increasing) versus a constant distance from sorted. Our bound is strictly greater than the (logn) queries required in the standard testing model, that allows element access indexed by rank, and strictly less than the (n12) queries required by a weak model that only allows...

  1. Programming list processes. SLIP: symmetric list processor - applications; Le traitement de listes en programmation. SLIP: langage de listes symetrique - applications

    Energy Technology Data Exchange (ETDEWEB)

    Broudin, Y [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)

    1966-06-01

    Modern aspects of programming languages are essentially turned towards list processing. The ordinary methods of sequential treatment become inadequate and we must substitute list processes for them, where the cells of a group have no neighbourhood connection, but where the address of one cell is contained in the preceding one. These methods are required in 'time sharing' solving problems. They also allow us to treat new problems and to solve others in the shortest time. Many examples are presented after an abstract of the most usual list languages and a detailed study of one of them : SLIP. Among these examples one should note: locating of words in a dictionary or in a card index, treatment of non numerical symbols, formal derivation. The problems are treated in Fortran II on an IBM 7094 machine. The subroutines which make up the language are presented in an appendix. (author) [French] La programmation moderne ne se satisfait plus des methodes classiques de traitement sequentiel ni des tableaux a positions de memoire contigues. Elle tend a generaliser les methodes de listes ou les cellules d'un groupe n'ont pas de relation de voisinage, mais sont enchainees en listes, l'une donnant l'adresse machine de l'autre. Ces methodes sont indispensables en 'partage de temps' et dans les traitements en 'temps reel'. De plus, elles permettent de traiter des problemes nouveaux et d'optimiser le temps de traitement de nombreux autres. De nombreux exemples sont traites, apres un resume des langages les plus utilises et une etude plus precise d'un langage de listes: SLIP. Parmi les exemples traites signalons la recherche lexicographique, le traitement de symboles alphanumeriques, la derivation formelle. Probleme traite en Fortran II sur IBM 7094. Les sous-programmes constitutifs du langage sont fournis en annexe. (auteur)

  2. Infants' Memory Processing of a Serial List: List Length Effects.

    Science.gov (United States)

    Gulya, Michele; Sweeney, Becky; Rovee-Collier, Carolyn

    1999-01-01

    Three experiments demonstrated that increasing the length of a mobile serial list impaired 6-month olds' memory for serial order. Findings indicated that the primacy effect was absent on a 24-hour delayed recognition test and was exhibited on a reactivation test, adding to growing evidence that young infants possess two functionally distinct…

  3. Achievement report for fiscal 1981 on Sunshine Program-assisted project. Survey of Australian industrial capability and construction capability relative to Australian brown coal liquefaction plant construction project (Annexed materials: Lists of projects undertaken by important corporations in Australia); 1981 nendo Goshu kattan ekika plant no kensetsu ni kakawaru kogyoryoku, kensetsu kojiryoku ni kansuru chosa seika hokokusho (fuzoku shiryo). Australia ni okeru shuyo kigyo no jisshi project list

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1982-03-01

    In relation with the construction of an Australian brown coal liquefaction plant, a survey is conducted into projects being undertaken by important businesses in Australia, and lists are compiled about them. Mentioned in the lists are the head office, directors, number of employees, line of business, contents of projects, the names of clients, etc., for each of 12 corporations including consulting firms and engineering contractors such as the Bechtel Pacific Corporation Limited. Named in the lists also are 17 manufacturers of pipes and tubes, pressure vessels, heat exchangers, tower tanks, steel structures and other fabricated metallic items, boilers, water treatment systems, pumps, electrical equipment, instrumentation, valves, iron and steel, etc. Furthermore, in relation with civil engineering and construction, 7 corporations including the Citra Constructions Limited are mentioned. (NEDO)

  4. List of unclassified documents by the staff of Metallurgy Division, AERE Harwell from January 1972 to July 1977

    International Nuclear Information System (INIS)

    Wallis, V.

    1977-11-01

    This list constitutes unclassified material published or presented between January 1972 and July 1977 by the staff of Metallurgy Division. It covers reports, memoranda, bibliographies, articles in periodicals, conference papers, books, theses and patent specifications. It is planned to issue a list annually. The publications are listed under the following titles of the research teams concerned: fast reactor fuels, advanced reactor systems, fracture studies, structural materials, radiation effects, composite materials, high voltage microscope and metals fabrication, management and administration. (U.K.)

  5. Report on achievements in fiscal 1998. Research and development of a technology to promote non-ferrous metal based material recycling. (Research on component technologies and a total system); 1998 nendo hitetsu kinzokukei sozai recycle sokushin gijutsu seika hokokusho. Kenkyu kaihatsu yoso gijutsu kenkyu, total system kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This project is intended to research and develop a high level aluminum recycling technology to realize the 'product to product' philosophy to return different aluminum scraps into the original materials, while attempting to develop and unify the aluminum recycling technologies and promote utilization of LNG. This fiscal year has studied the following methods as the component technology research: (1) an inclusion removing method, (2) a crystal sorting method, (3) a vacuum distillation method, and (4) a semi-melting method. The studies on (1), (2) and (3) were performed on identification of basic data and systematization to determine the life and facility specifications, with the full-swing demonstration tests being waited to start in fiscal 1999. The research and development on the item (4) was determined technologically feasible although additional discussions are required on the engineering aspect for practical application. The component technology study thereon will be finished with the current fiscal year. For the demonstration tests among the studies on total system technologies, the crystal sorting method and the vacuum distillation method had the achievements obtained in the research of the component technologies reflected directly to the facility design and fabrication. There has been no large-scale facility fabrication for the inclusion removing method and effective utilization of ash remaining in dross, and the researches were performed as scheduled. (NEDO)

  6. Sublime Imperfections : Annotated Reading List

    NARCIS (Netherlands)

    Rutten, E.

    2016-01-01

    In this reading list, I share thoughts on scholars and journalists from which the Sublime Imperfections project takes its inspiration. The authors of the texts that I clustered ponder the nexus between the imperfect and the sublime, they rethink repair and breakdown, they critically interrogate and

  7. IAHR List of Sea Parameters

    DEFF Research Database (Denmark)

    Frigaard, Peter; Helm-Petersen, J; Klopman, G.

    1997-01-01

    A Working Group on multidirectional waves formed by the International Association for Hydraulic Research has proposed an update of the IAHR List of Sea State Parameters from 1986 in the part concerning directional. Especially wave structure interaction with reflection of the waves have been treated....

  8. The program RADLST [Radiation Listing

    International Nuclear Information System (INIS)

    Burrows, T.W.

    1988-01-01

    The program RADLST (Radiation Listing) is designed to calculate the nuclear and atomic radiations associated with the radioactive decay of nuclei. It uses as its primary input nuclear decay data in the Evaluated Nuclear Structure Data File (ENSDF) format. The code is written in FORTRAN 77 and, with a few exceptions, is consistent with the ANSI standard. 65 refs

  9. Oil Companies Climb Global List

    Institute of Scientific and Technical Information of China (English)

    JESSY ZHANG

    2006-01-01

    @@ Backed by the huge market size,China's energy companies have been ranked in the group of the world's largest industry players. On September 6th,eight companies from the Chinese mainland and six companies from Hong Kong SAR were included in this year's Platts Top 250 Energy Companies List.

  10. List of publications, 1976 - 1981

    International Nuclear Information System (INIS)

    1981-12-01

    The scientific and technical publications of Atomic Energy of Canada Ltd. - reports, reprints of journal articles, and presentations to conferences - issued from April 1976 to March 1981 are listed under ten subject categories, and author and report number indexes are provided

  11. Panel draws up shopping list

    CERN Multimedia

    Clery, Daniel

    2006-01-01

    "European researchers have compiled a wish list of 35 large-scale projects that they would love to see built over the next 2 decades. The projects, which must be internationally important and open to all European researchers, include a database on the impacts of population aging, a polar research ship, and an underwater neutrino observatory." (1 page)

  12. Update History of This Database - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ...B link & Genome analysis methods English archive site is opened. 2012/08/08 PGDBj... Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods is opened. About This...ate History of This Database - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

  13. Risoe National Laboratory. List of selected publications 1979

    International Nuclear Information System (INIS)

    1980-11-01

    The list comprises a selection of scientific and technical publications of Risoe National Laboratory and its staff during 1979. Journal articles, conference papers, and reports are included. The publications are arranged in the following broad subject categories: Reactor Safety and Technology, The Nuclear Fuel Cycle, Environmental and General Safety Research, Materials Research, Radiation Technology, Agricultural Research, Non-Nuclear Energy Research, General. (author)

  14. List of Selected Publications 1983. Risø National Laboratory

    DEFF Research Database (Denmark)

    Risø National Laboratory, Roskilde

    The list comprises a selection of scientific and technical publications of Risø National Laboratory and its staff during 1983. Journal articles, conference papers, and reports are included. The publications are arranged in the following broad subject categories: Energy Supply and Supporting...... Technology, Environmental and Safety Research, Materials Research, Biotechnology and Radiation Research, Technical Support, General....

  15. List of selected publications 1981. Risoe National Laboratory

    International Nuclear Information System (INIS)

    1982-07-01

    The list comprises a selection of scientific and technical publications of Risoe National Laboratory and its staff during 1981. Journal articles, conference papers, and reports are included. The publications are arranged in the following broad subject categories: Energy Supply, Environmental and Safety Reseach, Materials Research, Biotechnology and Radiation Research,Experimental Methods and Analyses, Major Research Facilities, General. (author)

  16. List of selected publications 1982. Risoe National Laboratory

    International Nuclear Information System (INIS)

    1983-12-01

    The list comprises a selection of scientific and technical publications of Risoe National Laboratory and its staff during 1982. Journal articles, conference papers, and reports are included. The publications are arranged in the following broad subject categories: Energy Supply and Supporting Technology, Environmental and Safety Research, Materials Research, Biotechnology and Radiation Research, Technical and Administrative Services, General. (author)

  17. Risoe National Laboratory. List of selected publications 1980

    International Nuclear Information System (INIS)

    1981-12-01

    The list comprises a selection of scientific and technical publications of Risoe National Laboratory and its staff during 1980. Journal articles, conference papers, and reports are included. The publications are arranged in the following broad subject categories: Reactor Safety and Technology, The Nuclear Fuel Cycle, Environmental and General Safety Research, Materials Research, and Radiation Technology, Agricultural Research, Non-Nuclear Research, General. (author)

  18. List of selected publications 1978 Risoe National Laboratory

    International Nuclear Information System (INIS)

    1979-09-01

    The list comprises a selection of scientific and technical publications of Risoe National Laboratory and its staff during 1978. Journal articles, conference papers, and reports are included. The publications are arranged in the following broad subject categories: Reactor Safety Technology, The Nuclear Fuel Cycle, Environmental and General Safety Research, Materials Research, Radiation Technology, Agricultural Research, Non-Nuclear Energy Research, General. (author)

  19. List of selected publications 1983. Risoe National Laboratory

    International Nuclear Information System (INIS)

    1985-09-01

    The list comprises a selection of scientific and technical publications of Risoe National Laboratory and its staff during 1983. Journal articles, conference papers, and reports are included. The publications are arranged in the following broad subject categories: Energy Supply and Supporting Technology, Environmental and Safety Research, Materials Research, Biotechnology and Tradiation Research, Technical Support, General. (author)

  20. 12 CFR 618.8310 - Lists of borrowers and stockholders.

    Science.gov (United States)

    2010-01-01

    ... Section 618.8310 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM GENERAL PROVISIONS..., other than the stockholder's attorney or accountant, without first obtaining the written consent of the... this option when requesting the list to distribute campaign material for election to the institution...

  1. 78 FR 20912 - Clean Water Act: Availability of List Decisions

    Science.gov (United States)

    2013-04-08

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL-9798-8] Clean Water Act: Availability of List Decisions.... SUMMARY: The Clean Water Act requires that States periodically submit, and EPA approve or disapprove... are not stringent enough to attain or maintain State water quality standards and for which total...

  2. 78 FR 16475 - Procurement List; Proposed Additions and Deletion

    Science.gov (United States)

    2013-03-15

    ..., Inc., Indianapolis, IN Contracting Activity: Defense Logistics Agency Aviation, Richmond, VA Coverage: B-List for the Total Government Requirement as aggregated by the Defense Logistics Agency Aviation...: Dept of the Navy, NAVAL FAC Engineering CMD MID LANT, Norfolk, VA. Navy Operational Support Center Fort...

  3. Systematic prediction of new ferroelectric inorganic materials in point group 6

    International Nuclear Information System (INIS)

    Abrahams, S.C.

    1990-01-01

    A total of seven new families and sixteen structurally different inorganic materials with point group 6 are shown to satisfy the criteria presented previously by the present author for predicting ferroelectricity. In case each prediction is experimentally verified, the 183 individual entries for point group 6 listed in the Inorganic Crystal Structure Database will result in over 80 new ferroelectrics, of which about 30 are rare-earth isomorphs. The total number of 'pure'

  4. TWRS engineering bibliography software listing

    International Nuclear Information System (INIS)

    Husa, E.I.

    1995-01-01

    This document contains the computer software listing for Engineering Bibliography software, developed by E. Ivar Husa. This software is in the working prototype stage of development. The code has not been tested to requirements. TWRS Engineering created this software for engineers to share bibliographic references across the Hanford site network (HLAN). This software is intended to store several hundred to several thousand references (a compendium with limited range). Coded changes are needed to support the larger number of references

  5. Plant DB link - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ...e Site Policy | Contact Us Plant DB link - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

  6. Waiting list in a public health facility in Santiago, Chile

    Directory of Open Access Journals (Sweden)

    Alejandro Letelier

    2014-07-01

    Full Text Available Introduction Waiting lists are a well-known problem in public healthcare systems worldwide. For instance, England had over one million people in waiting lists for elective surgical procedures in 2000. Spain had over 360 000 patients in surgical waiting lists in 2007. Chile has been trying to manage waiting times through the GES (Explicit Guarantees in Healthcare plan, which was established by the Chilean government in 2005. Waiting lists for the guaranteed-care diseases in the GES plan had 380 000 patients at the beginning of 2010, and that number was reduced to zero in 2011. Internationally, there are some descriptive studies about waiting lists that focus on variables such as waiting times and number of patients in the list. In Chile, however, this type of study is lacking. Purpose This study aims to describe the characteristics of waiting lists for medical specialties between April and October 2011. It also aims to identify the components of management models in public healthcare centers, and to identify and analyze waiting-time frames of patients referred to a secondary or tertiary healthcare public center from a public primary healthcare center. Methods A descriptive cross-sectional study of the waiting list for first-time consultations for medical specialties was carried out. Referred patients were described and grouped using indicators of access to healthcare and waiting time between April and October 2011. Each consultation request or referral of a new patient was included in the waiting list and analyzed. Results There were 15 935 requests for consultations; 5 717 requests were resolved, and 8 544 were not (54% of the total requests for consultation. There was a mean waiting time of 498 days for non-resolved requests for consultation, and a mean of 141 days for resolved requests. The specialties in highest demand were orthopedic surgery and ophthalmology. The main waiting-list management processes were referral and reception of requests

  7. 308 Building electrical load list and panel schedules

    International Nuclear Information System (INIS)

    Giamberardini, S.J.

    1994-01-01

    This report contains two lists. The first lists equipment, load location, source of power, and breaker identification. The second compiles the same information but in a different format, namely, for each power source, the breaker, equipment, and location is given. Building 308 is part of the Fuels and Materials Examination Facility which houses the Secure Automated Fabrication process line for fabrication of reactor fuels and the Breeder Processing Engineering Test for processing Fast Flux Test Facility fuel to demonstrate closure of the fuel cycle

  8. The "Total Immersion" Meeting Environment.

    Science.gov (United States)

    Finkel, Coleman

    1980-01-01

    The designing of intelligently planned meeting facilities can aid management communication and learning. The author examines the psychology of meeting attendance; architectural considerations (lighting, windows, color, etc.); design elements and learning modes (furniture, walls, audiovisuals, materials); and the idea of "total immersion meeting…

  9. 7 CFR 1755.30 - List of telecommunications standard contract forms.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false List of telecommunications standard contract forms... UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE TELECOMMUNICATIONS POLICIES ON SPECIFICATIONS, ACCEPTABLE MATERIALS, AND STANDARD CONTRACT FORMS § 1755.30 List of telecommunications standard contract forms. (a...

  10. 7 CFR 1755.98 - List of telecommunications specifications included in other 7 CFR parts.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false List of telecommunications specifications included in... (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE TELECOMMUNICATIONS POLICIES ON SPECIFICATIONS, ACCEPTABLE MATERIALS, AND STANDARD CONTRACT FORMS § 1755.98 List of telecommunications specifications...

  11. 78 FR 64246 - Commerce in Explosives; List of Explosives Materials

    Science.gov (United States)

    2013-10-28

    ..., including non-cap sensitive slurry and water gel explosives. Blasting caps. Blasting gelatin. Blasting.... Explosive conitrates. Explosive gelatins. Explosive liquids. Explosive mixtures containing oxygen-releasing... powder. [[Page 64247

  12. 77 FR 35942 - Procurement List; Proposed Additions

    Science.gov (United States)

    2012-06-15

    ... List for production by the nonprofit agencies listed: Products Hose, Fire, Orange NSN: 4210-01-131-0247.... Contracting Activity: Dept. of Housing and Urban Development, Chicago Regional Office, RCO, Chicago, IL...

  13. 78 FR 40727 - Procurement List; Proposed Additions

    Science.gov (United States)

    2013-07-08

    ... for addition to the Procurement List for production by the nonprofit agencies listed: Products Towel.... 12/BX Cleaner, Brake Parts NSN: 6850-01-167-0678--17 oz. NPA: The Lighthouse for the Blind, St. Louis...

  14. 78 FR 35874 - Procurement List; Proposed Additions

    Science.gov (United States)

    2013-06-14

    ... proposed for addition to the Procurement List for production by the nonprofit agencies listed: Products... Cleaner NPA: Winston-Salem Industries for the Blind, Inc., Winston-Salem, NC Contracting Activity: Defense...

  15. Electronic Animal Drug Product Listing Directory

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Electronic Animal Drug Product Listing Directory is a directory of all animal drug products that have been listed electronically since June 1, 2009, to comply...

  16. Species List and Status of Mammals and Birds in Sambisa Game ...

    African Journals Online (AJOL)

    This study determined the species list and status of mammals and birds in Sambisa Game Reserve. Species list was determined using direct sighting, animal signs and activities, information from hunters and visits to bush meat processing and selling centers. Results indicate that a total of seventeen (17) species of ...

  17. How Picture Books on the National Science Teacher's Association Recommend List Portray Scientists

    Science.gov (United States)

    Farland-Smith, Donna; Finson, Kevin D.; Arquette, Cecile M.

    2017-01-01

    This study utilized the Draw-A-Scientist Test Checklist (DAST-C) to assess the illustrations of scientists in the most recent three years of NSTA Recommends book lists. A total of 15,778 images were contained in the 148 books from those lists, of which 1,676 were of scientists. ANOVA procedures revealed no significant differences in stereotypical…

  18. Stable isotope customer list and summary of shipments:

    International Nuclear Information System (INIS)

    Tracy, J.G.

    1988-03-01

    This compilation is published as an aid to those concerned with the separation and sale of stable isotopes. The information is divided into four sections: alphabetical lists of domestic and foreign customers;alphabetical lists of isotopes and services;alphabetical lists of states and countries;tabulation of the shipments, quantities, and dollars for each isotope and dollars for services divided into domestic, foreign, and DOE project categories. During FY 1987 sales of stable isotope products and services were made to 272 differnt customers, of whom 159 were domestic and 113 were foreign, representing 18 different foreign countries. The total revenue was $3,785,609 of which 12.3% was from sales to DOE project customers, 60.4% was from sales to other domestic customers, and 27.3% was from sales to foreign customers. this represented sales of 189 different stable isotopes plus associated services and was a 16.5% increase over FY 1986

  19. Monte Carlo Particle Lists: MCPL

    DEFF Research Database (Denmark)

    Kittelmann, Thomas; Klinkby, Esben Bryndt; Bergbäck Knudsen, Erik

    2017-01-01

    A binary format with lists of particle state information, for interchanging particles between various Monte Carlo simulation applications, is presented. Portable C code for file manipulation is made available to the scientific community, along with converters and plugins for several popular...... simulation packages. Program summary: Program Title: MCPL. Program Files doi: http://dx.doi.org/10.17632/cby92vsv5g.1 Licensing provisions: CC0 for core MCPL, see LICENSE file for details. Programming language: C and C++ External routines/libraries: Geant4, MCNP, McStas, McXtrace Nature of problem: Saving...

  20. Airborne Lidar Surface Topography (LIST) Simulator

    Science.gov (United States)

    Yu, Anthony W.; Krainak, Michael A.; Harding, David J.; Abshire, James B.; Sun, Xiaoli; Cavanaugh, John; Valett, Susan; Ramos-Izquierdo, Luis; Winkert, Tom; Plants, Michael; hide

    2011-01-01

    In this paper we will discuss our development effort of an airborne instrument as a pathfinder for the Lidar Surface Technology (LIST) mission. This paper will discuss the system approach, enabling technologies, instrument concept and performance of the Airborne LIST Simulator (A-LISTS).

  1. Publication List - New York State Museum.

    Science.gov (United States)

    New York State Museum, Albany.

    Presented is a list of publications in six areas: (1) Anthropology and Archeology, (2) Botany, (3) Entomology, (4) Zoology, (5) Geology and Paleontology, and (6) Miscellaneous. This list was produced by the New York State Department of Education in cooperation with the New York State Museum. The list includes the publication number, author(s),…

  2. 77 FR 26795 - Product List Changes

    Science.gov (United States)

    2012-05-07

    ... the United States Postal Service to Transfer Parcel Post to the Competitive Product List, April 26... Service request to remove Parcel Post from the market dominant product list and to add a nearly identical ``Parcel Post'' to the competitive product list. Alaska Bypass Service would remain on the market dominant...

  3. 77 FR 64567 - Product List Change

    Science.gov (United States)

    2012-10-22

    ... Delivery service from the competitive product list due to low customer demand.\\2\\ It states that there are... POSTAL REGULATORY COMMISSION [Docket No. MC2013-3; Order No. 1503] Product List Change AGENCY... product list. This notice provides public notice of the Postal Service's filing, invites public comment...

  4. 78 FR 37525 - Procurement List; Deletions

    Science.gov (United States)

    2013-06-21

    .... Contracting Activity: Dept of the Air Force, FA7014 AFDW A7KI, Andrews AFB, MD. Service Type/Location: Laundry... Procurement List. SUMMARY: This action deletes products and services from the Procurement List that were... products and services listed below are no longer suitable for procurement by the Federal Government under...

  5. 76 FR 43988 - Procurement List; Additions

    Science.gov (United States)

    2011-07-22

    ... this work, based on applicable experience. Finally, the purpose of the JWOD Act and the responsibility... COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED Procurement List; Additions... Procurement List. SUMMARY: This action adds products and services to the Procurement List that will be...

  6. 1968 Listing of Swimming Pool Equipment.

    Science.gov (United States)

    National Sanitation Foundation, Ann Arbor, MI. Testing Lab.

    An up-to-date listing of swimming pool equipment including--(1) companies authorized to display the National Sanitation Foundation seal of approval, (2) equipment listed as meeting NSF swimming pool equipment standards relating to diatomite type filters, (3) equipment listed as meeting NSF swimming pool equipment standard relating to sand type…

  7. Development of an Information Model for Kidney Transplant Wait List.

    Science.gov (United States)

    Bircan, Hüseyin Yüce; Özçelik, Ümit; Uysal, Nida; Demirağ, Alp; Haberal, Mehmet

    2015-11-01

    Deceased-donor kidney transplant is unique among surgical procedures that are an urgent procedure performed in an elective population. It has not been possible to accurately determine when a given patient will be called for transplant. Patients on the active transplant list can be called for a transplant at any time. As a result, every effort must be made to optimize their health according to best practices and published clinical practice guidelines. Once the patient is placed on the transplant wait list after undergoing an initial extensive evaluation, continued surveillance is required. Therefore, we developed a kidney transplant wait list surveillance software program that alerts organ transplant coordinator on time regarding which patients need a work-up. The new designed software has a database of our waiting patients with their completed and pending controls. The software also has built-in functions to warn the responsible staff with an E-mail. If one of the controls of a recipient delayed, the software sends an automated E-mail to the staff regarding the patients delayed controls. The software is a Web application that works on any platform with a Web browser and Internet connection and allows access by multiple users. The software has been developed with NET platform. The database is SQL server. The software has the following functions: patient communication info, search, alert list, alert E-mail, control entry, and system management. As of January 2014, a total of 21 000 patients were registered on the National Kidney Transplant wait list in Turkey and the kidney transplant wait list had been expanding by 2000 to 3000 patients each year. Therefore computerized wait list programs are crucial to help to transplant centers to keep their patients up-to-date on time.

  8. Database Description - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ... QTL list, Plant DB link & Genome analysis methods Alternative name - DOI 10.18908/lsdba.nbdc01194-01-000 Cr...ers and QTLs are curated manually from the published literature. The marker information includes marker sequences, genotyping methods... Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

  9. Automated nuclear materials accounting

    International Nuclear Information System (INIS)

    Pacak, P.; Moravec, J.

    1982-01-01

    An automated state system of accounting for nuclear materials data was established in Czechoslovakia in 1979. A file was compiled of 12 programs in the PL/1 language. The file is divided into four groups according to logical associations, namely programs for data input and checking, programs for handling the basic data file, programs for report outputs in the form of worksheets and magnetic tape records, and programs for book inventory listing, document inventory handling and materials balance listing. A similar automated system of nuclear fuel inventory for a light water reactor was introduced for internal purposes in the Institute of Nuclear Research (UJV). (H.S.)

  10. Division of Integrity and Materials

    International Nuclear Information System (INIS)

    Zdarek, J.

    1995-01-01

    The organization structure is described of the Division of Integrity and Materials, Institute of Nuclear Research plc, Rez, and the main fields of their activities given. Listed are the major research projects of the Division in 1994. (Z.S.)

  11. Title list of documents made publicly available, March 1-31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    This document is the March 1996 listing of publicly available documents published by the NRC. The documents include: (1) docketed material associated with civilian nuclear power plants and other uses of radioactive material, and (2) nondocketed material received and generated by the NRC in its role as a regulatory agency.

  12. Title list of documents made publicly available, March 1-31, 1996

    International Nuclear Information System (INIS)

    1996-05-01

    This document is the March 1996 listing of publicly available documents published by the NRC. The documents include: (1) docketed material associated with civilian nuclear power plants and other uses of radioactive material, and (2) nondocketed material received and generated by the NRC in its role as a regulatory agency

  13. Title list of documents made publicly available, November 1-30, 1985. Volume 7, No. 11

    International Nuclear Information System (INIS)

    1985-12-01

    The Title List of Documents Made Publicly Available contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC) during November 1985. This information includes: (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency

  14. An Electronic Mail List for a Network of Family Practice Residency Programs: A Good Idea?

    Directory of Open Access Journals (Sweden)

    Jodi Summers Holtrop

    2001-08-01

    Full Text Available The use of an electronic mailing list as a means of communication among faculty in a network of university-affiliated family practice residency programs was evaluated. Faculty were automatically subscribed to the list by the list owner. Messages were tracked for one year and a written evaluation survey was sent. Ninety two messages were sent, with 52% of the messages being posted information. While most (65% survey respondents reported reading 61% or more of the messages, with only 33% ever actually posted at least one message to the list. Given that faculty were automatically subscribed and that there were only 84 total members, the list may have failed to reach a critical mass of active participants. It is concluded that an email list for network faculty did not function as an online discussion group, although it was extremely beneficial as a way of posting information to affiliated residency faculty.

  15. Lists of semi-dwarf cereal stocks

    International Nuclear Information System (INIS)

    1984-01-01

    The lists are prepared in relation to the Co-ordinated Research Programme. At the first Research Co-ordination Meeting on evaluation of cereal semi-dwarf mutants for cross breeding, March 1981, programme participants were requested to list semi-dwarf mutants available at their institutes including also non-induced semi-dwarf stocks being used in cross-breeding programme for short stature. List-I is prepared from such lists provided by programme participants. Further it was requested to name breeders and institutes providing characteristics of the listed semi-dwarf stocks. List-II gives that information. In the List-I: Parents of semi-dwarf stocks derived from cross breeding, are shown in brackets. In column ''Culm length'', figures are in cm and those of parent cultivars are shown in brackets

  16. MaTech - the BMFT ''new materials'' materials research program - 1994 annual report about new materials for innovative information technology, energy technology, traffic engineering, medical engineering and production engineering applications, and about general materials research and new fields

    International Nuclear Information System (INIS)

    Lillack, D.; Gilbert, I.; Runte, S.

    1995-01-01

    This annual report gives a survey of projects supported within the framework of the Matfo and Ma-Tech programs. These projects focus on research into materials for innovative: 1. information technology, 2. energy technology, 3. traffic engineering, 4. medical engineering, and 5. production engineering applications and on 6. general materials research and new fields. The descriptions of individual projects indicate project goals and work schedules, names of important sub-contractors, and total costs and the funds contributed by BMFT. Information added in an annex includes inter alia a list of publications, lectures, contracts, or patents resulting from project activities in the year 1994. (MM) [de

  17. Total parenteral nutrition - infants

    Science.gov (United States)

    ... medlineplus.gov/ency/article/007239.htm Total parenteral nutrition - infants To use the sharing features on this page, please enable JavaScript. Total parenteral nutrition (TPN) is a method of feeding that bypasses ...

  18. Total parenteral nutrition

    Science.gov (United States)

    ... medlineplus.gov/ency/patientinstructions/000177.htm Total parenteral nutrition To use the sharing features on this page, please enable JavaScript. Total parenteral nutrition (TPN) is a method of feeding that bypasses ...

  19. Technique of total thyroidectomy

    International Nuclear Information System (INIS)

    Rao, R.S.

    1999-01-01

    It is essential to define the various surgical procedures that are carried out for carcinoma of the thyroid gland. They are thyroid gland, subtotal lobectomy, total thyroidectomy and near total thyroidectomy

  20. Total iron binding capacity

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/article/003489.htm Total iron binding capacity To use the sharing features on this page, please enable JavaScript. Total iron binding capacity (TIBC) is a blood test to ...

  1. List Decoding of Algebraic Codes

    DEFF Research Database (Denmark)

    Nielsen, Johan Sebastian Rosenkilde

    We investigate three paradigms for polynomial-time decoding of Reed–Solomon codes beyond half the minimum distance: the Guruswami–Sudan algorithm, Power decoding and the Wu algorithm. The main results concern shaping the computational core of all three methods to a problem solvable by module...... Hermitian codes using Guruswami–Sudan or Power decoding faster than previously known, and we show how to Wu list decode binary Goppa codes....... to solve such using module minimisation, or using our new Demand–Driven algorithm which is also based on module minimisation. The decoding paradigms are all derived and analysed in a self-contained manner, often in new ways or examined in greater depth than previously. Among a number of new results, we...

  2. Position list word aligned hybrid

    DEFF Research Database (Denmark)

    Deliege, Francois; Pedersen, Torben Bach

    2010-01-01

    Compressed bitmap indexes are increasingly used for efficiently querying very large and complex databases. The Word Aligned Hybrid (WAH) bitmap compression scheme is commonly recognized as the most efficient compression scheme in terms of CPU efficiency. However, WAH compressed bitmaps use a lot...... of storage space. This paper presents the Position List Word Aligned Hybrid (PLWAH) compression scheme that improves significantly over WAH compression by better utilizing the available bits and new CPU instructions. For typical bit distributions, PLWAH compressed bitmaps are often half the size of WAH...... bitmaps and, at the same time, offer an even better CPU efficiency. The results are verified by theoretical estimates and extensive experiments on large amounts of both synthetic and real-world data....

  3. Total well dominated trees

    DEFF Research Database (Denmark)

    Finbow, Arthur; Frendrup, Allan; Vestergaard, Preben D.

    cardinality then G is a total well dominated graph. In this paper we study composition and decomposition of total well dominated trees. By a reversible process we prove that any total well dominated tree can both be reduced to and constructed from a family of three small trees....

  4. Materials Research Department annual report 2000

    International Nuclear Information System (INIS)

    Winther, G.; Hansen, N.

    2001-03-01

    Selected activities of the Materials Research Department at Risoe National Laboratory during 2000 are described. The scientific work is presented in three chapters: Materials Science, Materials Engineering and Materials Technology. A survey is given of the Department's industrial collaboration, educational activities and academic activities, such as collaboration with other research institutions, committee work and a list of publications. Furthermore, the main figures outlining the funding and expenditures of the Department are given. Lists of staff members and visiting scientists are included. (au)

  5. Title list of documents made publicly available, March 1-31, 1983. Volume 5, No. 3

    International Nuclear Information System (INIS)

    1983-03-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979. Microfiche of the docketed information listed in the Title List is available for sale on a subscription basis from the National Technical Inforation Service (NTIS)

  6. Title list of documents made publicly available, March 1--31, 1989

    International Nuclear Information System (INIS)

    1989-05-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979. Microfiche of the docketed information listed in the Title List is available for sale on a subscription basis from the National Technical Information Service (NTIS)

  7. Title list of documents made publicly available, October 1-31, 1982

    International Nuclear Information System (INIS)

    1983-01-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes: (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials; and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979. Microfiche of the docketed information listed in the Title List is available for sale on a subscription basis from the National Technical Information Service (NTIS)

  8. Title list of documents made publicly available, May 1--31, 1988

    International Nuclear Information System (INIS)

    1988-07-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979. Microfiche of the docketed information listed in the Title List is available for sale on a subscription basis from the National Technical Information Service (NTIS)

  9. Paradigmatic List Constructions. Patterns and Functions

    Directory of Open Access Journals (Sweden)

    Valentina Benigni

    2016-02-01

    Full Text Available This paper deals with listing as a useful conceptual tool for categorization and offers an overview of the different types of lists in Russian, highlighting both universal and language-specific characteristics of this kind of construction. The data-driven approach adopted in this study allows you to identify the main criteria according to which lists can be classified (exhaustiveness of the enumeration, conjunction, types of constituents, compositionality, and so on. Particular attention is paid to paradigmatic lists, i.e. lists whose items are in a paradigmatic relationship with each other as either synonyms, co-hyponyms or co-meronyms. The features of this family of lists are dealt with in the framework of Construction Grammar, which accounts for both similarities in structure and meaning and differences in pragmatic and communicative functions.

  10. Download - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ...t_db_link_en.zip (36.3 KB) - 6 Genome analysis methods pgdbj_dna_marker_linkage_map_genome_analysis_methods_... of This Database Site Policy | Contact Us Download - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

  11. SECURITIES REGULATION: Improvements Needed in the Amex Listing Program

    National Research Council Canada - National Science Library

    2001-01-01

    .... The remaining markets had significantly fewer listings. For example, the fourth-largest market in terms of the number of companies listed was the Boston Stock Exchange, with 84 listings, 46 of which were also listed on Nasdaq...

  12. 19 CFR 4.50 - Passenger lists.

    Science.gov (United States)

    2010-04-01

    ... VESSELS IN FOREIGN AND DOMESTIC TRADES Passengers on Vessels § 4.50 Passenger lists. (a) The master of... passenger and crew lists, as required by § 4.7(a) of this part. If the vessel is arriving from noncontiguous... 19 Customs Duties 1 2010-04-01 2010-04-01 false Passenger lists. 4.50 Section 4.50 Customs Duties...

  13. Unravelling Airbnb Predicting Price for New Listing

    OpenAIRE

    Choudhary, Paridhi; Jain, Aniket; Baijal, Rahul

    2018-01-01

    This paper analyzes Airbnb listings in the city of San Francisco to better understand how different attributes such as bedrooms, location, house type amongst others can be used to accurately predict the price of a new listing that optimal in terms of the host's profitability yet affordable to their guests. This model is intended to be helpful to the internal pricing tools that Airbnb provides to its hosts. Furthermore, additional analysis is performed to ascertain the likelihood of a listings...

  14. Radiation carcinogenesis and related radiobiology. Special listing

    International Nuclear Information System (INIS)

    1978-01-01

    This Special Listing of Current Cancer Research Projects is a service of the International Cancer Research Data Bank (ICRDB) program of the National Cancer Institute. Each listing contains descriptions of ongoing projects in one selected cancer research area. The descriptions are provided by cancer scientists in about 50 different countries. Research areas covered in this listing are: Human cancer and exposure to radiation; experimental radiation carcinogenesis and radiation biology

  15. 76 FR 75536 - Procurement List; Proposed Addition

    Science.gov (United States)

    2011-12-02

    ... listed: Service Service Type/Location: Grounds Maintenance, Beale AFB, CA. NPA: Crossroads Diversified Service, Inc., Sacramento, CA. Contracting Activity: 9th Contracting Squadron, Beale AFB, CA. Patricia...

  16. SITE COMPREHENSIVE LISTING (CERCLIS) (Superfund) - NPL Sites

    Data.gov (United States)

    U.S. Environmental Protection Agency — National Priorities List (NPL) Sites - The Comprehensive Environmental Response, Compensation and Liability Information System (CERCLIS) (Superfund) Public Access...

  17. The chromatic polynomial and list colorings

    DEFF Research Database (Denmark)

    Thomassen, Carsten

    2009-01-01

    We prove that, if a graph has a list of k available colors at every vertex, then the number of list-colorings is at least the chromatic polynomial evaluated at k when k is sufficiently large compared to the number of vertices of the graph.......We prove that, if a graph has a list of k available colors at every vertex, then the number of list-colorings is at least the chromatic polynomial evaluated at k when k is sufficiently large compared to the number of vertices of the graph....

  18. Children's early reading vocabulary: description and word frequency lists.

    Science.gov (United States)

    Stuart, Morag; Dixon, Maureen; Masterson, Jackie; Gray, Bob

    2003-12-01

    When constructing stimuli for experimental investigations of cognitive processes in early reading development, researchers have to rely on adult or American children's word frequency counts, as no such counts exist for English children. The present paper introduces a database of children's early reading vocabulary, for use by researchers and teachers. Texts from 685 books from reading schemes and story books read by 5-7 year-old children were used in the construction of the database. All words from the 685 books were typed or scanned into an Oracle database. The resulting up-to-date word frequency list of early print exposure in the UK is available in two forms from a website address given in this paper. This allows access to one list of the words ordered alphabetically and one list of the words ordered by frequency. We also briefly address some fundamental issues underlying early reading vocabulary (e.g., that it is heavily skewed towards low frequencies). Other characteristics of the vocabulary are then discussed. We hope the word frequency lists will be of use to researchers seeking to control word frequency, and to teachers interested in the vocabulary to which young children are exposed in their reading material.

  19. Ethics in radiology: wait lists queue jumping.

    Science.gov (United States)

    Cunningham, Natalie; Reid, Lynette; MacSwain, Sarah; Clarke, James R

    2013-08-01

    Education in ethics is a requirement for all Royal College residency training programs as laid out in the General Standards of Accreditation for residency programs in Canada. The ethical challenges that face radiologists in clinical practice are often different from those that face other physicians, because the nature of the physician-patient interaction is unlike that of many other specialties. Ethics education for radiologists and radiology residents will benefit from the development of teaching materials and resources that focus on the issues that are specific to the specialty. This article is intended to serve as an educational resource for radiology training programs to facilitate teaching ethics to residents and also as a continuing medical education resource for practicing radiologists. In an environment of limited health care resources, radiologists are frequently asked to expedite imaging studies for patients and, in some respects, act as gatekeepers for specialty care. The issues of wait lists, queue jumping, and balancing the needs of individuals and society are explored from the perspective of a radiologist. Copyright © 2013 Canadian Association of Radiologists. Published by Elsevier Inc. All rights reserved.

  20. Development of a provisional essential medicines list for children in Canada: consensus process.

    Science.gov (United States)

    Woods, Hannah; Oronsaye, Efosa; Bali, Anjli; Rajakulasingam, Yathavan; Lee, Taehoon; Umali, Norman; Cohen, Eyal; Finkelstein, Yaron; Offringa, Martin; Persaud, Nav

    2018-03-26

    Worldwide, many countries have developed a list of essential medicines for children to improve prescribing. We aimed to create an essential medicines list for children in Canada. We adapted the previously created preliminary list of essential medicines for adults in Canada and the WHO Model List of Essential Medicines for Children to create a provisional list of essential medicines for children in Canada. Canadian clinicians made suggestions for changes. Literature relevant to each suggestion was presented to clinician-scientists, who used a modified nominal group technique to make recommendations on the suggestions. Ontario Public Drug Programs prescription data were reviewed to identify commonly prescribed medications missing from the list. Literature relevant to these medications was shared with a clinician-scientist review panel to determine which should be added, and a revised list was developed. A total of 76 items were removed from the list of essential medicines for adults in Canada because they were not indicated for use in children or were not relevant in the Canadian health care context; 7 medications were added to the child list based on Ontario Public Drugs Programs prescribing data and clinician-scientist review. Suggestions to add, remove or substitute medications were made by peer-reviewers and resulted in removal of 1 medication and replacement of 1 medication. The process produced a provisional list of 67 essential medications for children. A provisional list of 67 essential medicines for children was created through a peer-reviewed, multistep process based on current clinical evidence, Canadian clinical practice guidelines and historical prescribing data. It is publicly posted at http://cleanmeds.ca/. The list should be further developed based on wider input and should be continuously revised based on emerging evidence of the safety and effectiveness of these medicines in all pediatric age groups. Copyright 2018, Joule Inc. or its licensors.

  1. List of unclassified documents, lectures, etc. by the staff of Chemistry Division AERE Harwell 1.11.74 - 31.10.75

    International Nuclear Information System (INIS)

    Suttar, N.

    1976-02-01

    This list comprises unclassified material published or presented during 1975 by the staff of Chemistry Division and covers reports, memoranda, conference papers, lectures and articles in journals. (author)

  2. Total Quality Leadership

    Science.gov (United States)

    1991-01-01

    More than 750 NASA, government, contractor, and academic representatives attended the Seventh Annual NASA/Contractors Conference on Quality and Productivity. The panel presentations and Keynote speeches revolving around the theme of total quality leadership provided a solid base of understanding of the importance, benefits, and principles of total quality management (TQM). The presentations from the conference are summarized.

  3. Genoptraening efter total knaealloplastik

    DEFF Research Database (Denmark)

    Holm, Bente; Kehlet, Henrik

    2009-01-01

    The short- and long-term benefits of post-discharge physiotherapy regimens after total knee arthroplasty are debatable. A national survey including hospitals in Denmark that perform total knee arthroplasty showed a large variability in indication and regimen for post-knee arthroplasty...

  4. Results of monitoring at Olkiluoto in 2009. Foreign materials

    International Nuclear Information System (INIS)

    Kasa, S.

    2011-02-01

    This report focuses on foreign materials introduced to ONKALO. These foreign materials are not part of the engineered multi-barrier system or the natural environment. All the allowed materials introduced to ONKALO are included in the material handbook. All materials used in ONKALO 2009 are listed in this report. During 2009 the ONKALO access tunnel was excavated from the chainage of 3297 to the chainage of 4059 and the total excavated volume in 2009 was 36778 m 3 . During the years 2004 and 2009 the total excavated volume was 197838 m 3 . This report also summaries the total amount of foreign materials used in ONKALO since 2004. All waters used during the excavation of ONKALO have been pumped up to the surface into a sedimentation pool. In 2009 water samples were taken from sedimentation pool, from the end of the discharge tube and from the outlet ditch. The chemistry of these waters can indicate us how the foreign materials have effected on the undisturbed groundwater chemistry. (orig.)

  5. 78 FR 24309 - Pipeline and Hazardous Materials Safety Administration

    Science.gov (United States)

    2013-04-24

    ... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration List of Special Permit Applications Delayed AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA..., Pipeline and Hazardous Materials Safety Administration, U.S. Department of Transportation, East Building...

  6. 76 FR 45332 - Pipeline and Hazardous Materials Safety Administration

    Science.gov (United States)

    2011-07-28

    ... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration Office of... Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: List of Applications for Modification of..., 2011. ADDRESSES: Record Center, Pipeline and Hazardous Materials Safety Administration, U.S. Department...

  7. List of scientific and technical publications of the Karlsruhe Nuclear Research Centre, 1985

    International Nuclear Information System (INIS)

    1986-05-01

    The report lists the titles and other bibliographic data of the publications released in 1985. Lectures not yet available in printed form are listed separately. The patent section gives information on patent rights granted or published in 1985. Technical lectures or material prepared for courses held by the SKT (Nuclear Engineering School) are not part of the list. The data are arranged by institutes, information on project activities is given referring to published project reports and other publications prepared by project staff. The list also presents R and D reports printed by KfK for informationn on the PFT project, fabrication technologies, which is a joint enterprise by KfK, several other institutes, and industry. Publications of the branch institute of the Federal Food Research Institute are also given, followed by a list of publications prepared by guest scientists of the KfK. (orig./PW) [de

  8. Radiation carcinogenesis and related radiobiology. Special listing

    International Nuclear Information System (INIS)

    1980-01-01

    The special listing of Current Cancer Research Projects is a publication of the International Cancer Research Data Bank (ICRDB) Program of the National Cancer Institute. Each Listing contains descriptions of ongoing projects in one selected cancer research area. The research areas include: Human cancer and exposure to radiation; Experimental radiation carcinogenesis and radiation biology

  9. 75 FR 47550 - Procurement List; Additions

    Science.gov (United States)

    2010-08-06

    ...--Macintosh Apple NSN: MR 473--Fresh Linen NPA: Industries for the Blind, Inc., West Allis, WI Contracting... Service, 5777 S. Aviation Blvd., N. Charleston, SC NPA: Goodwill Industries of Lower South Carolina, Inc... Procurement List. SUMMARY: This action adds products and services to the Procurement List that will be...

  10. 19 CFR 19.46 - Employee lists.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Employee lists. 19.46 Section 19.46 Customs Duties... Employee lists. A permit shall not be granted to an operator to transfer a container or containers to a... new employees. The operator shall, within 10 calendar days, advise the port director if the employment...

  11. 75 FR 22745 - Procurement List Additions

    Science.gov (United States)

    2010-04-30

    ... General Services Administration. Services Service Type/Location: Laundry Services, Alaska VA Healthcare... Procurement List. SUMMARY: This action adds to the Procurement List products and services to be furnished by... concerning capability of qualified nonprofit agencies to provide the products and services and impact of the...

  12. 76 FR 80345 - Procurement List; Additions

    Science.gov (United States)

    2011-12-23

    ... ARMY, W6QL ECC MIAMI DIV, MIAMI, FL. Service Type/Location: Industrial Laundry Service, Bureau of... Procurement List. SUMMARY: This action adds services to the Procurement List that will be provided by... concerning capability of qualified nonprofit agencies to provide the services and impact of the additions on...

  13. 78 FR 48656 - Procurement List; Proposed Additions

    Science.gov (United States)

    2013-08-09

    ... Oceanic and Atmospheric Administration, Boulder, CO. Service Type/Location: Laundry Service, US Coast... Additions to the Procurement List. SUMMARY: The Committee is proposing to add products and services to the... required to procure the products and services listed below from nonprofit agencies employing persons who...

  14. 77 FR 27736 - Procurement List Additions

    Science.gov (United States)

    2012-05-11

    ... Research Laboratory, Washington, DC. Service Type/Location: Laundry, Refurbishment, and Warehouse Services... Procurement List. SUMMARY: This action adds products and services to the Procurement List that will be... products and services and impact of the additions on the current or most recent contractors, the Committee...

  15. 77 FR 29596 - Procurement List Proposed Additions

    Science.gov (United States)

    2012-05-18

    .../Location: Laundry Service, Veterans Administration Medical Center (VAMC), (offsite: 1809 W 2nd Avenue... Additions to the Procurement List. SUMMARY: The Committee is proposing to add products and services to the... identified in this notice will be required to procure the products and services listed below from nonprofit...

  16. 75 FR 14576 - Procurement List Additions

    Science.gov (United States)

    2010-03-26

    ... Inspection Service, Minneapolis, MN. M.R. Laundry Products NSN: MR 1103--Heavy Duty Laundry Bag. NSN: MR 1104... procurement list. SUMMARY: This action adds to the Procurement List products and services to be furnished by... products and services and impact of the additions on the current or most recent contractors, the Committee...

  17. Extended Access List untuk Mengendalikan Trafik Jaringan

    Directory of Open Access Journals (Sweden)

    Hari Antoni Musril

    2016-12-01

    Full Text Available Keamana jaringan komputer saat ini menjadi hal penting untuk diterapkan. Banyak organisasi yang telah menjadikan teknologi informasi sebagai bahagian penting dalam menunjang aktivitasnya. Akses pengguna yang tidak dibatasi menjadi ancaman bagi sebuah organisasi, karena banyak data dan informasi penting yang tersebar dalam perangkat jaringan komputer di organisasi tersebut dapat disusupi oleh pihak yang tidak berwenang. Salah satu usaha yang dapat dilakukan adalah dengan menerapkan extended access list yang merupakan salah satu bagian dari metode access control list. Extended access list dapat menyaring lalu lintas data suatu jaringan dengan mengontrol apakah paket-paket tersebut dilewatkan atau dihentikan. Extended access list juga dapat menjamin keamanan untuk setiap komputer sehingga jalur komunikasi serta hak akses setiap komputer dapat berjalan dengan baik. Extended access list memungkinkan penyaringan berdasarkan sumber atau alamat tujuan, protokol yang dipilih, port yang digunakan, dan apakah koneksi sudah ditetapkan. Tulisan ini membahas penerapan extended access list dalam jaringan supaya dapat melakukan filter terhadap paket data yang melewati jaringan. Penerapannya menggunakan software Packet Tracer 6.1.1 untuk membuat prototipe jaringan dan mensimulasikannya. Sehingga nanti dapat diterapkan pada jaringan yang sebenarnya. List yang dibangun pada penelitian ini diterapkan untuk protokol antara lain : TCP (WWW, FTP, Telnet, SMTP, POP3, UDP (DNS, dan ICMP (Ping. Hasilnya didapatkan extended access list yang dikonfigurasi pada router dalam topologi penelitian ini mampu melakukan filter terhadap paket yang melewati jaringan. Hasil konfigurasinya sangat spesifik, sehingga penerapan hak akses permit dan deny dapat dilakukan sesuai dengan aturan dan skenario yang dirancang.

  18. 14 CFR 1212.603 - Mailing lists.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Mailing lists. 1212.603 Section 1212.603 Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION PRIVACY ACT-NASA REGULATIONS Instructions for NASA Employees § 1212.603 Mailing lists. NASA will not sell, rent, or otherwise disclose an...

  19. 2000 Honor List: A Hopeful Bunch.

    Science.gov (United States)

    Nilsen, Alleen Pace; Donelson, Ken; Blasingame, James, Jr.

    2001-01-01

    Presents 11 titles selected for the 2000 Honor List for young adult literature. Notes that the books were selected by combining their favorites with the best-book list compiled by the editors of such publications as "School Library Journal,""Booklist," and "Horn Book." (SG)

  20. 76 FR 57719 - Procurement List; Proposed Additions

    Science.gov (United States)

    2011-09-16

    ... proposed for addition to the Procurement List for production by the nonprofit agencies listed: Products NSN: 7930-00-NIB-0583--Refills, Bathroom Cleaner and Deodorizer, Cartridge Concentrate. NSN: 7930-00-NIB-0584--Starter Kit, Bathroom Cleaner and Deodorizer, Cartridge Concentrate. NSN: 7930-00-NIB-0585...

  1. 78 FR 12296 - Procurement List; Proposed Additions

    Science.gov (United States)

    2013-02-22

    ... services are proposed for addition to the Procurement List for production by the nonprofit agencies listed... and Trailer Wash, 55 GL NSN: 7930-00-NIB-0649--Cleaner/Degreaser, Heavy Duty, Biodegradable, Car and Trucks, 5 GL NSN: 7930-00-NIB-0650--Cleaner/Degreaser, Heavy Duty, Biodegradable, Car and Trucks, 55 GL...

  2. 76 FR 81793 - The Commerce Control List

    Science.gov (United States)

    2011-12-29

    ... DEPARTMENT OF COMMERCE Bureau of Industry and Security 15 CFR Part 774 The Commerce Control List CFR Correction In Title 15 of the Code of Federal Regulations, Parts 300 to 799, revised as of Jan. 1... Commerce Control List), Category 9 Aerospace and Propulsion, Product Group E is amended by revising the...

  3. 78 FR 45183 - Procurement List Additions

    Science.gov (United States)

    2013-07-26

    ... Requirement as aggregated by the General Services Administration. NSN: 7920-00-NIB-0564--Towel, Cleaning, Non... Procurement List. SUMMARY: This action adds a products and services to the Procurement List that will be... presented to it concerning capability of qualified nonprofit agencies to provide the products and services...

  4. 76 FR 26279 - Procurement List; Proposed Additions

    Science.gov (United States)

    2011-05-06

    ...-service area; clean and sanitize food service equipment, utensil cleaning, and dishwashing; clean pots... additions to the Procurement List. SUMMARY: The Committee is proposing to add services to the Procurement... in this notice will be required to procure the services listed below from nonprofit agencies...

  5. Laparoscopic total pancreatectomy

    Science.gov (United States)

    Wang, Xin; Li, Yongbin; Cai, Yunqiang; Liu, Xubao; Peng, Bing

    2017-01-01

    Abstract Rationale: Laparoscopic total pancreatectomy is a complicated surgical procedure and rarely been reported. This study was conducted to investigate the safety and feasibility of laparoscopic total pancreatectomy. Patients and Methods: Three patients underwent laparoscopic total pancreatectomy between May 2014 and August 2015. We reviewed their general demographic data, perioperative details, and short-term outcomes. General morbidity was assessed using Clavien–Dindo classification and delayed gastric emptying (DGE) was evaluated by International Study Group of Pancreatic Surgery (ISGPS) definition. Diagnosis and Outcomes: The indications for laparoscopic total pancreatectomy were intraductal papillary mucinous neoplasm (IPMN) (n = 2) and pancreatic neuroendocrine tumor (PNET) (n = 1). All patients underwent laparoscopic pylorus and spleen-preserving total pancreatectomy, the mean operative time was 490 minutes (range 450–540 minutes), the mean estimated blood loss was 266 mL (range 100–400 minutes); 2 patients suffered from postoperative complication. All the patients recovered uneventfully with conservative treatment and discharged with a mean hospital stay 18 days (range 8–24 days). The short-term (from 108 to 600 days) follow up demonstrated 3 patients had normal and consistent glycated hemoglobin (HbA1c) level with acceptable quality of life. Lessons: Laparoscopic total pancreatectomy is feasible and safe in selected patients and pylorus and spleen preserving technique should be considered. Further prospective randomized studies are needed to obtain a comprehensive understanding the role of laparoscopic technique in total pancreatectomy. PMID:28099344

  6. Report on joint research in fiscal 1999. Research and development of technology to promote recycling of non-ferrous metal materials (Report on achievement in researches of demonstration tests and total system technology); 1999 nendo hitetsu kinzokukei sozai recycle sokushin gijutsu seika hokokusho. Jissho shiken kenkyu, total system gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Development has been in progress on promotion of recycling the non-ferrous metal materials, particularly aluminum, base metals and rare metals (such as copper). For aluminum, researches were made on demonstration of the crystal separation process, vacuum deposition process, molten scrap cleaning technology, and residual dross utilizing technology. In the crystal separation process to remove Fe and Si, and the vacuum deposition process to remove Zn, trial operation and adjustments were performed on the demonstration and testing facilities, making simulation in the scale of 1000 tons a month possible. In the molten scrap cleaning technology, discussions were given on a method to install on the trough a filter permitting micro inclusions in the molten scrap, but no results as have been expected were obtained. The residual dross was used on a trial basis for applications such as road aggregate and refractory materials. In the exhaust treatment, it was recognized effective that activated carbon and slaked lime are used simultaneously to remove hydrochloric acid and dioxins. In developing a technology to regenerate high-grade copper from sludge dust, discussions were given on design, fabrication, and trial operation of the demonstration facilities, partly by using a demonstration plant, with regard to the five related technologies including a technology for high precision refining of scraps, and high-speed metal melting technology. (NEDO)

  7. Estonian total ozone climatology

    Directory of Open Access Journals (Sweden)

    K. Eerme

    Full Text Available The climatological characteristics of total ozone over Estonia based on the Total Ozone Mapping Spectrometer (TOMS data are discussed. The mean annual cycle during 1979–2000 for the site at 58.3° N and 26.5° E is compiled. The available ground-level data interpolated before TOMS, have been used for trend detection. During the last two decades, the quasi-biennial oscillation (QBO corrected systematic decrease of total ozone from February–April was 3 ± 2.6% per decade. Before 1980, a spring decrease was not detectable. No decreasing trend was found in either the late autumn ozone minimum or in the summer total ozone. The QBO related signal in the spring total ozone has an amplitude of ± 20 DU and phase lag of 20 months. Between 1987–1992, the lagged covariance between the Singapore wind and the studied total ozone was weak. The spring (April–May and summer (June–August total ozone have the best correlation (coefficient 0.7 in the yearly cycle. The correlation between the May and August total ozone is higher than the one between the other summer months. Seasonal power spectra of the total ozone variance show preferred periods with an over 95% significance level. Since 1986, during the winter/spring, the contribution period of 32 days prevails instead of the earlier dominating 26 days. The spectral densities of the periods from 4 days to 2 weeks exhibit high interannual variability.

    Key words. Atmospheric composition and structure (middle atmosphere – composition and chemistry; volcanic effects – Meteorology and atmospheric dynamics (climatology

  8. TOTAL Reference 27

    African Journals Online (AJOL)

    ENEH O C

    2012-11-01

    Nov 1, 2012 ... health effects of crude lead extracted from e-wastes materials, ... children and pregnant women, whose bones are under- .... able to pass through the placenta and into breast milk, ..... Protecting children from toxic exposure:.

  9. Total photon absorption

    International Nuclear Information System (INIS)

    Carlos, P.

    1985-06-01

    The present discussion is limited to a presentation of the most recent total photonuclear absorption experiments performed with real photons at intermediate energy, and more precisely in the region of nucleon resonances. The main sources of real photons are briefly reviewed and the experimental procedures used for total photonuclear absorption cross section measurements. The main results obtained below 140 MeV photon energy as well as above 2 GeV are recalled. The experimental study of total photonuclear absorption in the nuclear resonance region (140 MeV< E<2 GeV) is still at its beginning and some results are presented

  10. [Total artificial heart].

    Science.gov (United States)

    Antretter, H; Dumfarth, J; Höfer, D

    2015-09-01

    To date the CardioWest™ total artificial heart is the only clinically available implantable biventricular mechanical replacement for irreversible cardiac failure. This article presents the indications, contraindications, implantation procedere and postoperative treatment. In addition to a overview of the applications of the total artificial heart this article gives a brief presentation of the two patients treated in our department with the CardioWest™. The clinical course, postoperative rehabilitation, device-related complications and control mechanisms are presented. The total artificial heart is a reliable implant for treating critically ill patients with irreversible cardiogenic shock. A bridge to transplantation is feasible with excellent results.

  11. Radiation damage in organic materials

    International Nuclear Information System (INIS)

    Campbell, F.J.

    1981-01-01

    A surprising number of electrical components and seals are listed as being inside the containment building of a nuclear power plant. The types of radiation and their interaction with organic materials lead to a dosimetry discussion, and then a brief description of the chemical mechanisms which predominate in typical organic materials follows. Relative stability of polymer structures and the types of additives that contribute stabilization to the basic polymer matrix in formulated compounds are reviewed. However, the emphasis must now be directed toward the need to consider the total environment of nuclear plant service on the degradation of these materials if maximum reliability is to be achieved. The degradation mechanisms may be strongly affected by the dose-rate/oxidation effect. Temperature, steam and physical stress, when applied concurrently with the radiation field, can also influence the amount of absorbed dose required to produce a given change in the property being tested. Determining the degree of these influences and developing standardized test procedures to evaluate them have become the objective of several prominent research programs and international committee efforts. (author)

  12. Transitioning the California Energy Commission Eligible Equipment List to a National Platform

    Energy Technology Data Exchange (ETDEWEB)

    Truitt, Sarah; Nobler, Erin; Krasko, Vitaliy; Blair, Nate; Kurtz, Sarah; Hillman, Daniel; Studer, Daniel

    2017-03-01

    The Energy Commission called on the National Renewable Energy Laboratory's (NREL)'s Solar Technical Assistance Team to explore various pathways for supporting continued evolution of the list. NREL staff utilized the Database of State Incentives for Renewables and Efficiency (DSIRE), California Solar Initiative (CSI) data, and information from in-depth interviews to better understand the impact of a lack of an updated list and suggest potential solutions. A total of 18 people from state energy offices, rebate program administrators, utilities, national testing laboratories, private companies, nonprofit organizations, and the federal government were interviewed between July and September 2013. CSI data were analyzed to illustrate the monetary benefits of the algorithm behind calculating performance of PV modules included on the list. The primary objectives of this study are to: 1) Determine the impact of not maintaining the list, and 2) Explore alternatives to the State of California's maintenance of the list.

  13. Materials Department. Annual report 1990

    International Nuclear Information System (INIS)

    Horsewell, A.; Hansen, N.

    1991-07-01

    Selected activities of the Materials Department at Risoe National Laboratory during 1990 are described. The work is presented in three chapters: Materials Science, Materials Engineering and Materials Technology. A survey is given of the Department's participation in international collaboration and of its activities within education and training. Furthermore, the main figures outlining the funding and expenditure of the Department are given. Lists of staff members, visiting scientists, publications, lectures and poster presentations are included. (author) 91 refs., 46 ills

  14. Materials Department. Annual report 1991

    International Nuclear Information System (INIS)

    Horsewell, A.; Hansen, N.

    1992-03-01

    Selected activities of the Materials Department at Risoe National Laboratory during 1991 are described. The work is presented in three chapters: Materials Science, Materials Engineering and Materials Technology. A survey is given of the Department's participation in international collaboration and of its activities within education and training. Furthermore, the main figures outlining the funding and expenditure of the Department are given. Lists of staff members, visiting scientists, publications, lectures and poster presentations are included. (au)

  15. Total 2004 results

    International Nuclear Information System (INIS)

    2005-02-01

    This document presents the 2004 results of Total Group: consolidated account, special items, number of shares, market environment, adjustment for amortization of Sanofi-Aventis merger-related intangibles, 4. quarter 2004 results (operating and net incomes, cash flow), upstream (results, production, reserves, recent highlights), downstream (results, refinery throughput, recent highlights), chemicals (results, recent highlights), Total's full year 2004 results (operating and net income, cash flow), 2005 sensitivities, Total SA parent company accounts and proposed dividend, adoption of IFRS accounting, summary and outlook, main operating information by segment for the 4. quarter and full year 2004: upstream (combined liquids and gas production by region, liquids production by region, gas production by region), downstream (refined product sales by region, chemicals), Total financial statements: consolidated statement of income, consolidated balance sheet (assets, liabilities and shareholder's equity), consolidated statements of cash flows, business segments information. (J.S.)

  16. Total synthesis of ciguatoxin.

    Science.gov (United States)

    Hamajima, Akinari; Isobe, Minoru

    2009-01-01

    Something fishy: Ciguatoxin (see structure) is one of the principal toxins involved in ciguatera poisoning and the target of a total synthesis involving the coupling of three segments. The key transformations in this synthesis feature acetylene-dicobalthexacarbonyl complexation.

  17. Total 2004 results

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-02-01

    This document presents the 2004 results of Total Group: consolidated account, special items, number of shares, market environment, adjustment for amortization of Sanofi-Aventis merger-related intangibles, 4. quarter 2004 results (operating and net incomes, cash flow), upstream (results, production, reserves, recent highlights), downstream (results, refinery throughput, recent highlights), chemicals (results, recent highlights), Total's full year 2004 results (operating and net income, cash flow), 2005 sensitivities, Total SA parent company accounts and proposed dividend, adoption of IFRS accounting, summary and outlook, main operating information by segment for the 4. quarter and full year 2004: upstream (combined liquids and gas production by region, liquids production by region, gas production by region), downstream (refined product sales by region, chemicals), Total financial statements: consolidated statement of income, consolidated balance sheet (assets, liabilities and shareholder's equity), consolidated statements of cash flows, business segments information. (J.S.)

  18. Genoptraening efter total knaealloplastik

    DEFF Research Database (Denmark)

    Holm, Bente; Kehlet, Henrik

    2009-01-01

    The short- and long-term benefits of post-discharge physiotherapy regimens after total knee arthroplasty are debatable. A national survey including hospitals in Denmark that perform total knee arthroplasty showed a large variability in indication and regimen for post-knee arthroplasty rehabilitat......The short- and long-term benefits of post-discharge physiotherapy regimens after total knee arthroplasty are debatable. A national survey including hospitals in Denmark that perform total knee arthroplasty showed a large variability in indication and regimen for post-knee arthroplasty...... rehabilitation. Since hospital stay duration has decreased considerably, the need for post-discharge physiotherapy may also have changed. Thus, the indication for and types of rehabilitation programmes need to be studied within the context of fast-track knee arthroplasty....

  19. Genoptraening efter total knaealloplastik

    DEFF Research Database (Denmark)

    Holm, Bente; Kehlet, Henrik

    2009-01-01

    The short- and long-term benefits of post-discharge physiotherapy regimens after total knee arthroplasty are debatable. A national survey including hospitals in Denmark that perform total knee arthroplasty showed a large variability in indication and regimen for post-knee arthroplasty rehabilitat......The short- and long-term benefits of post-discharge physiotherapy regimens after total knee arthroplasty are debatable. A national survey including hospitals in Denmark that perform total knee arthroplasty showed a large variability in indication and regimen for post-knee arthroplasty...... rehabilitation. Since hospital stay duration has decreased considerably, the need for post-discharge physiotherapy may also have changed. Thus, the indication for and types of rehabilitation programmes need to be studied within the context of fast-track knee arthroplasty. Udgivelsesdato: 2009-Feb-23...

  20. Title list of documents made publicly available, February 1--28, 1990

    International Nuclear Information System (INIS)

    1990-06-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes docketed material associated with civilian nuclear power plants and other uses of radioactive materials, and nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979

  1. Title list of documents made publicly available, April 1--30, 1991

    International Nuclear Information System (INIS)

    1991-06-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes docketed material associated with civilian nuclear power plants and other uses of radioactive materials and nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979

  2. Title list of documents made publicly available, April 1--30, 1990

    International Nuclear Information System (INIS)

    1990-07-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979

  3. Title list of documents made publicly available, December 1--31, 1990

    International Nuclear Information System (INIS)

    1991-02-01

    The Title List of Documents Made Publicly Available is a monthly publication. It contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes docketed material associated with civilian nuclear power plants and other uses of radioactive materials and nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979

  4. Supravaginal eller total hysterektomi?

    DEFF Research Database (Denmark)

    Edvardsen, L; Madsen, E M

    1994-01-01

    There has been a decline in the rate of hysterectomies in Denmark in general over the last thirteen years, together with a rise in the number of supravaginal operations over the last two years. The literature concerning the relative merits of the supravaginal and the total abdominal operation is ...... indicate a reduced frequency of orgasm after the total hysterectomy compared with the supravaginal operation. When there are technical problems peroperatively with an increased urologic risk the supravaginal operation is recommended....

  5. Total lymphoid irradiation

    International Nuclear Information System (INIS)

    Sutherland, D.E.; Ferguson, R.M.; Simmons, R.L.; Kim, T.H.; Slavin, S.; Najarian, J.S.

    1983-01-01

    Total lymphoid irradiation by itself can produce sufficient immunosuppression to prolong the survival of a variety of organ allografts in experimental animals. The degree of prolongation is dose-dependent and is limited by the toxicity that occurs with higher doses. Total lymphoid irradiation is more effective before transplantation than after, but when used after transplantation can be combined with pharmacologic immunosuppression to achieve a positive effect. In some animal models, total lymphoid irradiation induces an environment in which fully allogeneic bone marrow will engraft and induce permanent chimerism in the recipients who are then tolerant to organ allografts from the donor strain. If total lymphoid irradiation is ever to have clinical applicability on a large scale, it would seem that it would have to be under circumstances in which tolerance can be induced. However, in some animal models graft-versus-host disease occurs following bone marrow transplantation, and methods to obviate its occurrence probably will be needed if this approach is to be applied clinically. In recent years, patient and graft survival rates in renal allograft recipients treated with conventional immunosuppression have improved considerably, and thus the impetus to utilize total lymphoid irradiation for its immunosuppressive effect alone is less compelling. The future of total lymphoid irradiation probably lies in devising protocols in which maintenance immunosuppression can be eliminated, or nearly eliminated, altogether. Such protocols are effective in rodents. Whether they can be applied to clinical transplantation remains to be seen

  6. Totally optimal decision rules

    KAUST Repository

    Amin, Talha

    2017-11-22

    Optimality of decision rules (patterns) can be measured in many ways. One of these is referred to as length. Length signifies the number of terms in a decision rule and is optimally minimized. Another, coverage represents the width of a rule’s applicability and generality. As such, it is desirable to maximize coverage. A totally optimal decision rule is a decision rule that has the minimum possible length and the maximum possible coverage. This paper presents a method for determining the presence of totally optimal decision rules for “complete” decision tables (representations of total functions in which different variables can have domains of differing values). Depending on the cardinalities of the domains, we can either guarantee for each tuple of values of the function that totally optimal rules exist for each row of the table (as in the case of total Boolean functions where the cardinalities are equal to 2) or, for each row, we can find a tuple of values of the function for which totally optimal rules do not exist for this row.

  7. Totally optimal decision rules

    KAUST Repository

    Amin, Talha M.; Moshkov, Mikhail

    2017-01-01

    Optimality of decision rules (patterns) can be measured in many ways. One of these is referred to as length. Length signifies the number of terms in a decision rule and is optimally minimized. Another, coverage represents the width of a rule’s applicability and generality. As such, it is desirable to maximize coverage. A totally optimal decision rule is a decision rule that has the minimum possible length and the maximum possible coverage. This paper presents a method for determining the presence of totally optimal decision rules for “complete” decision tables (representations of total functions in which different variables can have domains of differing values). Depending on the cardinalities of the domains, we can either guarantee for each tuple of values of the function that totally optimal rules exist for each row of the table (as in the case of total Boolean functions where the cardinalities are equal to 2) or, for each row, we can find a tuple of values of the function for which totally optimal rules do not exist for this row.

  8. 10 CFR 110.8 - List of nuclear facilities and equipment under NRC export licensing authority.

    Science.gov (United States)

    2010-01-01

    ... isotopes of uranium (source material or special nuclear material) including gas centrifuge plants, gaseous diffusion plants, aerodynamic enrichment plants, chemical exchange or ion exchange enrichment plants, laser... of uranium. (See appendices to this part for lists of: gas centrifuge equipment—Appendix B; gaseous...

  9. Overseas listing location and capital structure

    Institute of Scientific and Technical Information of China (English)

    Peixin Li; Baolian Wang

    2014-01-01

    Purpose-A significant number of Chinese companies are listed overseas.The authors aim to examine whether overseas locations affect their financing decision,specifically their capital structure choice.Design/methodology/approach-Most of the Chinese overseas listed companies are listed in the USA and Hong Kong.As the institutional quality of the USA is better than Hong Kong,the authors,therefore,choose to build the hypotheses from the “law and finance” literature.Specifically,the authors argue that the better institutional environment of the USA can mitigate the information asymmetry problem and the agency problem of financing via equity.Consequently,firms listed in the USA will rely more on equity and have lower leverage ratio.The difference in leverage ratio of US listed and Hong Kong listed companies should be larger when the marginal benefit of better information environment is larger.Findings-Referring to various data sources,the authors construct a comprehensive list of overseas listed companies in the USA and Hong Kong.The authors collect the accounting and stock performance information from Datastream/Worldscope and the equity offering data from Global New Issue database.The empirical findings provide strong support of the hypotheses:the leverage is 15 percent lower for US listed companies than the Hong Kong listed companies;the results are stronger when the firms face more severe information asymmetry problem;the stock price reacts less negatively for seasoned equity offering in the USA than in Hong Kong.Practical implications-Most of the Chinese companies decided to be listed overseas because they cannot be listed in the Mainland Chinese stock exchanges.One of the most important motivation is to access to external capital to support firm growth.As the main channel of external financing in the overseas markets is equity since debt is still mainly domestically based,one implication of this paper is that Chinese companies can gain better access to external

  10. Nuclear material control in Spain

    International Nuclear Information System (INIS)

    Velilla, A.

    1988-01-01

    A general view about the safeguards activities in Spain is presented. The national system of accounting for and control of nuclear materials is described. The safeguards agreements signed by Spain are presented and the facilities and nuclear materials under these agreements are listed. (E.G.) [pt

  11. Nuclear material control in Brazil

    International Nuclear Information System (INIS)

    Marzo, M.A.S.; Iskin, M.C.L.; Palhares, L.C.; Almeida, S.G. de.

    1988-01-01

    A general view about the safeguards activities in Brazil is presented. The national system of accounting for and control of nuclear materials is described. The safeguards agreements signed by Brazil are presented, the facilities and nuclear material under these agreements are listed, and the dificulties on the pratical implementation are discussed. (E.G.) [pt

  12. Plastic Materials for Insulating Applications.

    Science.gov (United States)

    Wang, S. F.; Grossman, S. J.

    1987-01-01

    Discusses the production and use of polymer materials as thermal insulators. Lists several materials that provide varying degrees of insulation. Describes the production of polymer foam and focuses on the major applications of polystyrene foam, polyurethane foam, and polyisocyanurate foam. (TW)

  13. Total volume versus bouts

    DEFF Research Database (Denmark)

    Chinapaw, Mai; Klakk, Heidi; Møller, Niels Christian

    2018-01-01

    BACKGROUND/OBJECTIVES: Examine the prospective relationship of total volume versus bouts of sedentary behaviour (SB) and moderate-to-vigorous physical activity (MVPA) with cardiometabolic risk in children. In addition, the moderating effects of weight status and MVPA were explored. SUBJECTS....../METHODS: Longitudinal study including 454 primary school children (mean age 10.3 years). Total volume and bouts (i.e. ≥10 min consecutive minutes) of MVPA and SB were assessed by accelerometry in Nov 2009/Jan 2010 (T1) and Aug/Oct 2010 (T2). Triglycerides, total cholesterol/HDL cholesterol ratio (TC:HDLC ratio......, with or without mutual adjustments between MVPA and SB. The moderating effects of weight status and MVPA (for SB only) were examined by adding interaction terms. RESULTS: Children engaged daily in about 60 min of total MVPA and 0-15 min/week in MVPA bouts. Mean total sedentary time was around 7 h/day with over 3...

  14. Information Retrieval during Free Listing Is Biased by Memory: Evidence from Medicinal Plants.

    Directory of Open Access Journals (Sweden)

    Daniel Carvalho Pires de Sousa

    Full Text Available Free listing is a methodological tool that is widely used in various scientific disciplines. A typical assumption of this approach is that individual lists reflect a subset of total knowledge and that the first items listed are the most culturally important. However, little is known about how cognitive processes influence free lists. In this study, we assess how recent memory of use, autonoetic and anoetic memory, and long-term associative memory can affect the composition and order of items in free lists and evaluate whether free lists indicate the most important items. Based on a model of local knowledge about medicinal plants and their therapeutic targets, which was collected via individual semi-structured interviews, we classify each item recorded in free lists according to the last time that the item was used by the informant (recently or long ago, the type of relevant memory (autonoetic or anoetic memory and the existing associations between therapeutic targets (similar or random. We find that individuals have a tendency to recall information about medicinal plants used during the preceding year and that the recalled plants were also the most important plants during this period. However, we find no trend in the recall of plants from long-term associative memory, although this phenomenon is well established in studies on cognitive psychology. We suggest that such evidence should be considered in studies that use lists of medicinal plants because this temporal cognitive limit on the retrieval of knowledge affects data interpretation.

  15. List search hardware for interpretive software

    CERN Document Server

    Altaber, Jacques; Mears, B; Rausch, R

    1979-01-01

    Interpreted languages, e.g. BASIC, are simple to learn, easy to use, quick to modify and in general 'user-friendly'. However, a critically time consuming process during interpretation is that of list searching. A special microprogrammed device for fast list searching has therefore been developed at the SPS Division of CERN. It uses bit- sliced hardware. Fast algorithms perform search, insert and delete of a six-character name and its value in a list of up to 1000 pairs. The prototype shows retrieval times of the order of 10-30 microseconds. (11 refs).

  16. List of publications 1986-1987

    International Nuclear Information System (INIS)

    1988-03-01

    This list includes all the scientific and technical publications of Atomic Energy of Canada Limited - reports, reprints of journal articles, and translations - issued from 1986 April to 1987 December. Together with the earlier cumulative lists (AECL-5000, AECL-5001, AECL-5002, AECL--5003, AECL--5004, AECL--5005), it provides a complete catalogue of publications in the AECL-series. In the future, lists will be produced at twelve month intervals. The titles and other bibliographic information are arranged in several categories, each devoted to a broad subject area. In addition, each document is identified with an AECL number (for example, AECL-12345) which should be used in ordering reports and making enquiries

  17. World list of nuclear power plants

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    Twice each year Nuclear News sends a questionnaire to each utility or agency on this list, asking for corrections or additions to the information listed. In cases where a response is not received, we try to follow up by phone or facsimile, though this is not always possible for plants outside the United States. The criterion for listing a unit is that either an order or a letter of intent has been signed for the reactor. In cases where the definition of open-quotes letter of intentclose quotes may be ambiguous, or where a special situation exists, the judgment of the utility is followed as to whether a plant should be included

  18. Total versus subtotal hysterectomy

    DEFF Research Database (Denmark)

    Gimbel, Helga; Zobbe, Vibeke; Andersen, Anna Birthe

    2005-01-01

    The aim of this study was to compare total and subtotal abdominal hysterectomy for benign indications, with regard to urinary incontinence, postoperative complications, quality of life (SF-36), constipation, prolapse, satisfaction with sexual life, and pelvic pain at 1-year postoperative. Eighty...... women chose total and 105 women chose subtotal abdominal hysterectomy. No significant differences were found between the 2 operation methods in any of the outcome measures at 12 months. Fourteen women (15%) from the subtotal abdominal hysterectomy group experienced vaginal bleeding and three women had...

  19. Qualità totale e mobilità totale Total Quality and Total Mobility

    Directory of Open Access Journals (Sweden)

    Giuseppe Trieste

    2010-05-01

    Full Text Available FIABA ONLUS (Italian Fund for Elimination of Architectural Barriers was founded in 2000 with the aim of promoting a culture of equal opportunities and, above all, it has as its main goal to involve public and private institutions to create a really accessible and usable environment for everyone. Total accessibility, Total usability and Total mobility are key indicators to define quality of life within cities. A supportive environment that is free of architectural, cultural and psychological barriers allows everyone to live with ease and universality. In fact, people who access to goods and services in the urban context can use to their advantage time and space, so they can do their activities and can maintain relationships that are deemed significant for their social life. The main aim of urban accessibility is to raise the comfort of space for citizens, eliminating all barriers that discriminate people, and prevent from an equality of opportunity. “FIABA FUND - City of ... for the removal of architectural barriers” is an idea of FIABA that has already affected many regions of Italy as Lazio, Lombardy, Campania, Abruzzi and Calabria. It is a National project which provides for opening a bank account in the cities of referring, in which for the first time, all together, individuals and private and public institutions can make a donation to fund initiatives for the removal of architectural barriers within its own territory for a real and effective total accessibility. Last February the fund was launched in Rome with the aim of achieving a Capital without barriers and a Town European model of accessibility and usability. Urban mobility is a prerequisite to access to goods and services, and to organize activities related to daily life. FIABA promotes the concept of sustainable mobility for all, supported by the European Commission’s White Paper. We need a cultural change in management and organization of public means, which might focus on

  20. Measurements of total suspended matter - How does salinity and the amount of rinse water influence the results; Maetning av totalt suspenderat material - Hur paaverkar salthalt och maengden skoeljvatten resultatet

    Energy Technology Data Exchange (ETDEWEB)

    Hall, Bjoern (Bjoern Hall, Miljoe och Foerbraenningskemi, Onsala (Sweden))

    2010-03-15

    Under regulations for incineration of waste NFS 2002:28 total suspended matter (tsm) in wastewater from incineration plants are analyzed by daily sampling measurement or by representative flow-proportional 24-hour test. It has been shown that many plants that analyzes the suspended matter according to EN 872:2005 are having trouble keeping their conditions for suspended solids constant. This applies mainly to plants rated for a high chloride content in the closing process. Waste Sweden has for years drawn attention to this problem and have with a joint working group with representatives from the Swedish waste incineration plants tried to obtain a better understanding of this phenomenon. The basic question is whether the water from the facilities in question really contain high levels of tsm or if there is something else behind the observed concentrations. The results from this study suggest that the most important factor is the salinity and the amount of rinse water used in the analysis. Under the standard, all samples are washed with 2 x 20 ml of water. If salinity exceeds 1000 mg/l, a further 3 x 50 ml used. How this process is this implemented in practice varies from laboratory to laboratory and there is no laboratory that regularly measure the salinity of the sample. It is not specified especially when submitting the sample uses most of the labs normal rinse water of 2 x 20 ml. The findings also indicate that the samples with very high salinities the standard stipulated 190 mls is not enough. This would likely lead to that further rinse water is needed. In order to establish safe Several measurements would be needed to confirm this assumption. A relatively simple way to obtain an idea of the salinity of the test is to measure its conductivity. Accordingly, this could be a first step on to get a more consistent performance than is the case at present

  1. CSF total protein

    Science.gov (United States)

    CSF total protein is a test to determine the amount of protein in your spinal fluid, also called cerebrospinal fluid (CSF). ... The normal protein range varies from lab to lab, but is typically about 15 to 60 milligrams per deciliter (mg/dL) ...

  2. Total body irradiation

    International Nuclear Information System (INIS)

    Novack, D.H.; Kiley, J.P.

    1987-01-01

    The multitude of papers and conferences in recent years on the use of very large megavoltage radiation fields indicates an increased interest in total body, hemibody, and total nodal radiotherapy for various clinical situations. These include high dose total body irradiation (TBI) to destroy the bone marrow and leukemic cells and provide immunosuppression prior to a bone marrow transplant, high dose total lymphoid irradiation (TLI) prior to bone marrow transplantation in severe aplastic anemia, low dose TBI in the treatment of lymphocytic leukemias or lymphomas, and hemibody irradiation (HBI) in the treatment of advanced multiple myeloma. Although accurate provision of a specific dose and the desired degree of dose homogeneity are two of the physicist's major considerations for all radiotherapy techniques, these tasks are even more demanding for large field radiotherapy. Because most large field radiotherapy is done at an extended distance for complex patient geometries, basic dosimetry data measured at the standard distance (isocenter) must be verified or supplemented. This paper discusses some of the special dosimetric problems of large field radiotherapy, with specific examples given of the dosimetry of the TBI program for bone marrow transplant at the authors' hospital

  3. Total design of participation

    DEFF Research Database (Denmark)

    Munch, Anders V.

    2016-01-01

    The idea of design as an art made not only for the people, but also by the people is an old dream going back at least to William Morris. It is, however, reappearing vigoriously in many kinds of design activism and grows out of the visions of a Total Design of society. The ideas of participation b...

  4. Total Quality Management Seminar.

    Science.gov (United States)

    Massachusetts Career Development Inst., Springfield.

    This booklet is one of six texts from a workplace literacy curriculum designed to assist learners in facing the increased demands of the workplace. The booklet contains seven sections that cover the following topics: (1) meaning of total quality management (TQM); (2) the customer; (3) the organization's culture; (4) comparison of management…

  5. Total photon absorption

    International Nuclear Information System (INIS)

    Carlos, P.

    1985-01-01

    Experimental methods using real photon beams for measurements of total photonuclear absorption cross section σ(Tot : E/sub γ/) are recalled. Most recent σ(Tot : E/sub γ/)results for complex nuclei and in the nucleon resonance region are presented

  6. Total 2004 annual report

    International Nuclear Information System (INIS)

    2004-01-01

    This annual report of the Group Total brings information and economic data on the following topics, for the year 2004: the corporate governance, the corporate social responsibility, the shareholder notebook, the management report, the activities, the upstream (exploration and production) and downstream (refining and marketing) operating, chemicals and other matters. (A.L.B.)

  7. Total Water Management - Report

    Science.gov (United States)

    There is a growing need for urban water managers to take a more holistic view of their water resource systems as population growth, urbanization, and current operations put different stresses on the environment and urban infrastructure. Total Water Management (TWM) is an approac...

  8. EPA CIO Governance Board Membership List

    Science.gov (United States)

    In keeping with OMB guidance on implementing the Federal Information Technology Reform Act (FITARA), EPA is publishing its list of officials who perform the duties or responsibilities of a Bureau CIO.

  9. 77 FR 46409 - Procurement List; Additions

    Science.gov (United States)

    2012-08-03

    ... List. Binder, Loose-Leaf NSN: 7510-01-392-5283--3 D-Ring, No Overlay, Black, 5'' NSN: 7510-01-495-0696... Requirement as aggregated by the General Services Administration. Copy Paper, 100% Recycled, Convenience Pack...

  10. Reference List About Implicit and Unconscious Bias

    DEFF Research Database (Denmark)

    Munar, Ana Maria; Villeseche, Florence; Wiedemann, Cecilie Dam

    to publications accessible through the CBS library website and/or specifications of where and how to access each publication. In addition, as part of this effort and in line with the task list of the Council for Diversity and Inclusion, the report “Gender and Leadership Practices at Copenhagen Business School......The compilation of this reference list is one of the initiatives of the action plan developed by the Council for Diversity and Inclusion at Copenhagen Business School (CBS). This reference list is the first in a series of efforts initiated by this Council to develop an academic resource pool......, everyday human thought and activity” (Hardin and Banaji, 2013, pp. 13-14). Research also indicates that it is possible to implement procedures and strategic actions that help reduce implicit biases (Devine, Forscher, Austin, & Cox, 2012). Although extensive, this list does not include all existing academic...

  11. 40 CFR 60.16 - Priority list.

    Science.gov (United States)

    2010-07-01

    ... PERFORMANCE FOR NEW STATIONARY SOURCES General Provisions § 60.16 Priority list. Prioritized Major Source... and Resins: Polyethylene 19. Charcoal Production 20. Synthetic Rubber (a) Tire manufacture (b) SBR...

  12. 78 FR 38953 - Procurement List Additions

    Science.gov (United States)

    2013-06-28

    ... Blind or Severely Disabled published notices of proposed additions to the Procurement List. After... Punch, Paper, Desktop, 3-Hole, Adjustable, 11 sheet capacity, Metallic Base, Black Grip. Coverage: A...

  13. Science responses to IUCN Red Listing

    Directory of Open Access Journals (Sweden)

    Ivan Jarić

    2017-11-01

    Full Text Available The IUCN Red List of Threatened Species is often advocated as a tool to assist decision-making in conservation investment and research focus. It is frequently suggested that research efforts should prioritize species in higher threat categories and those that are Data Deficient (DD. We assessed the linkage between IUCN listing and research effort in DD and Critically Endangered (CR species, two groups generally advocated as research priorities. The analysis of the change in the research output following species classification indicated a listing effect in DD species, while such effect was observed in only a minority of CR species groups. DD species, while chronically understudied, seem to be recognized as research priorities, while research effort for endangered species appears to be driven by various factors other than the IUCN listing. Optimized conservation research focus would require international science planning efforts, harmonized through international mechanisms and promoted by financial and other incentives.

  14. Listing of Sandia publications in nuclear energy

    International Nuclear Information System (INIS)

    Cochrell, R.C.

    1990-10-01

    This report gives an annotated bibliography of reports published in 1989 by the Nuclear Energy Technology Directorate. A listing is also given of reports published by the staff in the nuclear energy field since 1972

  15. Astronomy Books of 1985: The Technical List.

    Science.gov (United States)

    Fraknoi, Andrew

    1986-01-01

    Consists of the second part of the 1985 annotated review of technical books done by the Astronomical Society of the Pacific. This listing was primarily designed for graduate students or research scientists. (TW)

  16. HUD Subprime and Manufactured Home Lender List

    Data.gov (United States)

    Department of Housing and Urban Development — The U.S. Department of Housing and Urban Development (HUD) periodically produce its HUD Subprime and Manufactured home Lender List for the lenders who specialize in...

  17. 76 FR 777 - National Wetland Plant List

    Science.gov (United States)

    2011-01-06

    ... the Wetland Conservation Provisions of the Food Security Act. Other applications of the list include... recommended changes and additions to the NWPL. The process will be supported by an interactive Web site where...

  18. Oil spill sorbents: Testing protocol and certification listing program

    International Nuclear Information System (INIS)

    Cooper, D.; Gausemel, I.

    1993-01-01

    Environment Canada's Emergencies Engineering Division is spearheading a program in conjunction with the Canadian General Standards Board that would see the development of a certification and listing program in addition to a national standard for the testing of sorbent materials. Funding for this program is provided by Environment Canada (EC), Canadian Coast Guard (CCG), Marine Spill Response Corporation (MSRC), US Coast Guard (USCG), and US Minerals Management Service (MMS). The test methods are based upon those defined by the American Society for Testing and Materials and previous test methods developed by Environment Canada for our series of reports entitled Selection Criteria and Laboratory Evaluation of Oil Spill Sorbents. This series, which was started in 1975, encompasses a number of commercially available oil spill sorbents tested with different petroleum products and hydrocarbon solvents. The testing program will categorize the sorbents according to their operating characteristics. The main categories are oil spills on water, oil spills on land, and industrial use. The characteristics to be evaluated with the new test protocols include initial and maximum sorption capacities, water pickup, buoyancy, reuse potential, retention profile, disintegration (material integrity), and ease of application and retrieval. In the near future are plans to incorporate changes to the test that would involve increasing the list of test liquids to encompass spills in an industrial setting, in addition to testing sorbent booms and addressing the disposal problem

  19. Title list of documents made publicly available. Documents from October-December 1978 for Dockets 50-334 through STN 50-597

    International Nuclear Information System (INIS)

    1978-01-01

    This special edition of the Title List contains Docket 50 material from 1978 that has not appeared in previous issues of the Title List. The documents in this supplement are indexed by personal author, corporate source, and report number. The listings of this material on the domestic licensing of production and utilization facilities, divided into the categories used for filing and searching in the NRC Public Document Room, are presented

  20. Automatic detection of omissions in medication lists.

    Science.gov (United States)

    Hasan, Sharique; Duncan, George T; Neill, Daniel B; Padman, Rema

    2011-01-01

    Evidence suggests that the medication lists of patients are often incomplete and could negatively affect patient outcomes. In this article, the authors propose the application of collaborative filtering methods to the medication reconciliation task. Given a current medication list for a patient, the authors employ collaborative filtering approaches to predict drugs the patient could be taking but are missing from their observed list. The collaborative filtering approach presented in this paper emerges from the insight that an omission in a medication list is analogous to an item a consumer might purchase from a product list. Online retailers use collaborative filtering to recommend relevant products using retrospective purchase data. In this article, the authors argue that patient information in electronic medical records, combined with artificial intelligence methods, can enhance medication reconciliation. The authors formulate the detection of omissions in medication lists as a collaborative filtering problem. Detection of omissions is accomplished using several machine-learning approaches. The effectiveness of these approaches is evaluated using medication data from three long-term care centers. The authors also propose several decision-theoretic extensions to the methodology for incorporating medical knowledge into recommendations. Results show that collaborative filtering identifies the missing drug in the top-10 list about 40-50% of the time and the therapeutic class of the missing drug 50%-65% of the time at the three clinics in this study. Results suggest that collaborative filtering can be a valuable tool for reconciling medication lists, complementing currently recommended process-driven approaches. However, a one-size-fits-all approach is not optimal, and consideration should be given to context (eg, types of patients and drug regimens) and consequence (eg, the impact of omission on outcomes).

  1. Task Performance with List-Mode Data

    Science.gov (United States)

    Caucci, Luca

    This dissertation investigates the application of list-mode data to detection, estimation, and image reconstruction problems, with an emphasis on emission tomography in medical imaging. We begin by introducing a theoretical framework for list-mode data and we use it to define two observers that operate on list-mode data. These observers are applied to the problem of detecting a signal (known in shape and location) buried in a random lumpy background. We then consider maximum-likelihood methods for the estimation of numerical parameters from list-mode data, and we characterize the performance of these estimators via the so-called Fisher information matrix. Reconstruction from PET list-mode data is then considered. In a process we called "double maximum-likelihood" reconstruction, we consider a simple PET imaging system and we use maximum-likelihood methods to first estimate a parameter vector for each pair of gamma-ray photons that is detected by the hardware. The collection of these parameter vectors forms a list, which is then fed to another maximum-likelihood algorithm for volumetric reconstruction over a grid of voxels. Efficient parallel implementation of the algorithms discussed above is then presented. In this work, we take advantage of two low-cost, mass-produced computing platforms that have recently appeared on the market, and we provide some details on implementing our algorithms on these devices. We conclude this dissertation work by elaborating on a possible application of list-mode data to X-ray digital mammography. We argue that today's CMOS detectors and computing platforms have become fast enough to make X-ray digital mammography list-mode data acquisition and processing feasible.

  2. Swedish Listed Family Firms and Entrepreneurial Spirit

    OpenAIRE

    Bjuggren, Per-Olof; Palmberg, Johanna

    2008-01-01

    This paper investigates the entrepreneurial spirit in Swedish listed family firms. We associate family firms with entrepreneurship in the sense that there is an identifiable person that takes the uninsurable risk in the sense of Knight. This paper analysis two questions: Do entrepreneurial family firms have a higher rate of growth and do they invest in a more profit maximizing fashion than other listed firms? The analysis shows that entrepreneurial family firms in general are smaller in terms...

  3. The national tree-list layer

    Science.gov (United States)

    Stacy A. Drury; Jason M. Herynk

    2011-01-01

    The National Tree-List Layer (NTLL) project used LANDFIRE map products to produce the first national tree-list map layer that represents tree populations at stand and regional levels. The NTLL was produced in a short time frame to address the needs of Fire and Aviation Management for a map layer that could be used as input for simulating fire-caused tree mortality...

  4. Economic benefits analysis of listed companies in radiation processing

    International Nuclear Information System (INIS)

    Zhang Yingming; Xu Tao; Zhang Yue; Yang Bin; Zhao Wenying

    2012-01-01

    Radiation processing industry is an important part of civilian nuclear technology and develop rapidly during the past decade. Radiation modification of new materials industries use new technology to promote new product development and application and get good economic benefit. There are problems and bottlenecks during the development, such as how to implement the guideline of optimize the industrial structure and upgrade the product, and adapt the market develop law and need. By analysing the typical listed companies in this field together with the domestic economic development condition and future situation, we give the development strategy and method in the future. (authors)

  5. Decree of the State Office for Nuclear Safety No. 147/1997 of 17 June 1997 specifying lists of selected nuclear-related items and dual-use nuclear-related items

    International Nuclear Information System (INIS)

    1997-01-01

    The core of the Decree consists of 2 lists, viz (a) the List of Selected Items (selected nuclear-related materials, equipment and technologies) which are subject to control regimes during imports, exports and transit; and (b) the List of Dual-Use Items (dual-use nuclear-related materials, equipment and technologies) which are subject to control regimes during imports and exports. Both Lists are based on the IAEA document INFCIRC/254/Rev.2/Part 2/Mod.1. (P.A.)

  6. List of unclassified documents by the staff of Metallurgy Division, AERE Harwell from January 1979 to July 1980

    International Nuclear Information System (INIS)

    Smith, N.C.

    1980-12-01

    This list constitutes unclassified material published or presented between January 1979 and July 1980, by the staff of Metallurgy Division. It covers reports, memoranda, articles in periodicals, conference papers, books and patent specifications. (author)

  7. Title list of documents made publicly available, December 1--31, 1988

    International Nuclear Information System (INIS)

    1989-02-01

    This monthly publication contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes docketed material associated with civilian power plants and other uses of radioactive materials and nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979. Microfiche of the docketed information listed in the Title List is available for sale on a subscription basis from the National Technical Information Service (NTIS)

  8. Title list of documents made publicly available, April 1--30, 1989

    International Nuclear Information System (INIS)

    1989-06-01

    This monthly publication contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personnel Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979. Microfiche of the docketed information listed in the Title List is available for sale on a subscription basis from the National Technical Information Service (NTIS)

  9. Title list of documents made publicly available, October 1--31, 1989

    International Nuclear Information System (INIS)

    1990-01-01

    This monthly publication contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979. Microfiche of the docketed information listed in the Title List is available for sale on a subscription basis from the National Technical Information Service (NTIS). See NOTES at the end of the Preface for the complete NTIS address

  10. Title list of documents made publicly available, November 1--30, 1988

    International Nuclear Information System (INIS)

    1989-01-01

    This monthly publication contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes docketed material associated with civilian nuclear power plants and other uses of radioactive materials and nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979. Microfiche of the docketed information listed in the Title List is available for sale on a subscription basis from the National Technical Information Service (NTIS)

  11. Title list of documents made publicly available: January 1--31, 1989

    International Nuclear Information System (INIS)

    1989-03-01

    This monthly publication contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979. Microfiche of the docketed information listed in the Title List is available for sale on a subscription basis from the National Technical Information Service (NTIS)

  12. Title List of Documents Made Publicly Available, February 1--28, 1991

    International Nuclear Information System (INIS)

    1991-04-01

    The document is a monthly publication which contains descriptions of the information received and generated by the U.S. Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets, it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979. Microfiche of the docketed information listed in the Title List is available for sale on a subscription basis from the National Technical Information Service (NTIS)

  13. Title list of documents made publicly available, September 1--30,1990

    International Nuclear Information System (INIS)

    1990-11-01

    This monthly publication contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes docketed material associated with civilian nuclear power plants and other uses of radioactive materials and nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. This series of documents is indexed by a Personal Author Index a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979. Microfiche of the docketed information listed in the Title List is available for sale on a subscription basis from the National Technical Information Service (NTIS)

  14. Title list of documents made publicly available, May 1--31, 1990

    International Nuclear Information System (INIS)

    1990-07-01

    This monthly publication contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979. Microfiche of the docketed information listed in the Title List is available for sale on a subscription basis from the National Technical Information Service (NTIS)

  15. Title list of documents made publicly available, August 1-31, 1987

    International Nuclear Information System (INIS)

    1987-10-01

    This monthly publication contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes docketed material associated with civilian nuclear power plants and other uses of radioactive materials, and nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List includes the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979. Microfiche of the docketed information listed in the Title List is available for sale on a subscription basis from the National Technical Information Service (NTIS)

  16. Title list of documents made publicly available, May 1--31, 1989

    International Nuclear Information System (INIS)

    1989-07-01

    This monthly publication contains descriptions of the information received and generated by the US Nuclear Regulatory Commission (NRC). This information includes (1) docketed material associated with civilian nuclear power plants and other uses of radioactive materials and (2) nondocketed material received and generated by NRC pertinent to its role as a regulatory agency. As used here, docketed does not refer to Court dockets; it refers to the system by which NRC maintains its regulatory records. This series of documents is indexed by a Personal Author Index, a Corporate Source Index, and a Report Number Index. The docketed information contained in the Title List included the information formerly issued through the Department of Energy publication Power Reactor Docket Information, last published in January 1979. Microfiche of the docketed information listed in the Title List is available for sale on a subscription basis from the National Technical Information Service (NTIS)

  17. Total 2003 Results

    International Nuclear Information System (INIS)

    2003-01-01

    This document presents the 2003 results of Total Group: consolidated account, special items, number of shares, market environment, 4. quarter 2003 results, full year 2003 results, upstream (key figures, proved reserves), downstream key figures, chemicals key figures, parent company accounts and proposed dividends, 2004 sensitivities, summary and outlook, operating information by segment for the 4. quarter and full year 2003: upstream (combined liquids and gas production by region, liquids production by region, gas production by region), downstream (refinery throughput by region, refined product sales by region, chemicals), impact of allocating contribution of Cepsa to net operating income by business segment: equity in income (loss) and affiliates and other items, Total financial statements: consolidated statement of income, consolidated balance sheet (assets, liabilities and shareholder's equity), consolidated statements of cash flows, business segments information. (J.S.)

  18. TOTAL PERFORMANCE SCORECARD

    Directory of Open Access Journals (Sweden)

    Anca ȘERBAN

    2013-06-01

    Full Text Available The purpose of this paper is to present the evolution of the Balanced Scorecard from a measurement instrument to a strategic performance management tool and to highlight the advantages of implementing the Total Performance Scorecard, especially for Human Resource Management. The study has been accomplished using the methodology of bibliographic study and various secondary sources. Implementing the classical Balanced Scorecard indicated over the years, repeatedly failure. It can be indicated that the crucial level is determined by the learning and growth perspective. It has been developed from a human perspective, which focused on staff satisfaction, innovation perspective with focus on future developments. Integrating the Total Performance Scorecard in an overall framework assures the company’s success, by keeping track of the individual goals, the company’s objectives and strategic directions. Like this, individual identity can be linked to corporate brand, individual aspirations to business goals and individual learning objectives to needed organizational capabilities.

  19. Totally parallel multilevel algorithms

    Science.gov (United States)

    Frederickson, Paul O.

    1988-01-01

    Four totally parallel algorithms for the solution of a sparse linear system have common characteristics which become quite apparent when they are implemented on a highly parallel hypercube such as the CM2. These four algorithms are Parallel Superconvergent Multigrid (PSMG) of Frederickson and McBryan, Robust Multigrid (RMG) of Hackbusch, the FFT based Spectral Algorithm, and Parallel Cyclic Reduction. In fact, all four can be formulated as particular cases of the same totally parallel multilevel algorithm, which are referred to as TPMA. In certain cases the spectral radius of TPMA is zero, and it is recognized to be a direct algorithm. In many other cases the spectral radius, although not zero, is small enough that a single iteration per timestep keeps the local error within the required tolerance.

  20. Entomology: A Catalog of Instructional Materials.

    Science.gov (United States)

    Rutschky, Charles W.

    This reference book provides information on all types of materials for teaching and studying entomology. The first section contains: a list of books organized by subject and arranged alphabetically by author; lists of booklets, offprints, and pamphlets on various entomological topics; sources of equipment, live insects, and titles of laboratory…

  1. Instructional Aids, Materials, and Supplies--Guidelines.

    Science.gov (United States)

    Education Development Center, Inc., Newton, MA.

    This resource guide produced for the Follow Through Program, primarily lists instructional aids and supplies; it also suggests practical implications for provisioning the classroom environment, gives specific suggestions for Project Follow Through directors, and lists addresses of suppliers. The materials are divided into nine categories, which…

  2. Total space in resolution

    Czech Academy of Sciences Publication Activity Database

    Bonacina, I.; Galesi, N.; Thapen, Neil

    2016-01-01

    Roč. 45, č. 5 (2016), s. 1894-1909 ISSN 0097-5397 R&D Projects: GA ČR GBP202/12/G061 EU Projects: European Commission(XE) 339691 - FEALORA Institutional support: RVO:67985840 Keywords : total space * resolution random CNFs * proof complexity Subject RIV: BA - General Mathematics Impact factor: 1.433, year: 2016 http://epubs.siam.org/doi/10.1137/15M1023269

  3. MFTF TOTAL benchmark

    International Nuclear Information System (INIS)

    Choy, J.H.

    1979-06-01

    A benchmark of the TOTAL data base management system as applied to the Mirror Fusion Test Facility (MFTF) data base was implemented and run in February and March of 1979. The benchmark was run on an Interdata 8/32 and involved the following tasks: (1) data base design, (2) data base generation, (3) data base load, and (4) develop and implement programs to simulate MFTF usage of the data base

  4. Total - annual report 2005

    International Nuclear Information System (INIS)

    2006-01-01

    This annual report presents the activities and results of TOTAL S.A., french society on oil and gas. It deals with statistics, the managers, key information on financial data and risk factors, information on the Company, unresolved Staff Comments, employees, major Shareholders, consolidated statements, markets, security, financial risks, defaults dividend arrearages and delinquencies, controls and procedures, code of ethics and financial statements. (A.L.B.)

  5. Total Absorption Spectroscopy

    International Nuclear Information System (INIS)

    Rubio, B.; Gelletly, W.

    2007-01-01

    The problem of determining the distribution of beta decay strength (B(GT)) as a function of excitation energy in the daughter nucleus is discussed. Total Absorption Spectroscopy is shown to provide a way of determining the B(GT) precisely. A brief history of such measurements and a discussion of the advantages and disadvantages of this technique, is followed by examples of two recent studies using the technique. (authors)

  6. Materials Research Department Annual report 1998

    Energy Technology Data Exchange (ETDEWEB)

    Winther, Grethe; Hansen, N [eds.

    1999-04-01

    Selected activities of the Materials Research Department at Risoe National Laboratory during 1998 are described. The scientific work is presented in five chapters: Materials Science, Materials Engineering, Materials Technology, Materials Chemistry and Fusion Materials. A survey is given of the Departments collaboration with national and international industries and research institutions. Furthermore, the main figures outlining the funding and expenditure of the Department are given. Lists of staff members, visiting scientists and educational activities are included. (au) 165 refs.

  7. Materials Research Department Annual report 1998

    International Nuclear Information System (INIS)

    Winther, Grethe; Hansen, N.

    1999-04-01

    Selected activities of the Materials Research Department at Risoe National Laboratory during 1998 are described. The scientific work is presented in five chapters: Materials Science, Materials Engineering, Materials Technology, Materials Chemistry and Fusion Materials. A survey is given of the Departments collaboration with national and international industries and research institutions. Furthermore, the main figures outlining the funding and expenditure of the Department are given. Lists of staff members, visiting scientists and educational activities are included. (au)

  8. Sobredentadura total superior implantosoportada

    Directory of Open Access Journals (Sweden)

    Luis Orlando Rodríguez García

    2010-06-01

    Full Text Available Se presenta un caso de un paciente desdentado total superior, rehabilitado en la consulta de implantología de la Clínica "Pedro Ortiz" del municipio Habana del Este en Ciudad de La Habana, Cuba, en el año 2009, mediante prótesis sobre implantes osteointegrados, técnica que se ha incorporado a la práctica estomatológica en Cuba como alternativa al tratamiento convencional en los pacientes desdentados totales. Se siguió un protocolo que comprendió una fase quirúrgica, procedimiento con o sin realización de colgajo y carga precoz o inmediata. Se presenta un paciente masculino de 56 años de edad, que acudió a la consulta multidisciplinaria, preocupado, porque se le habían elaborado tres prótesis en los últimos dos años y ninguna reunía los requisitos de retención que él necesitaba para sentirse seguro y cómodo con las mismas. El resultado final fue la satisfacción total del paciente, con el mejoramiento de la calidad estética y funcional.

  9. A computed room temperature line list for phosphine

    Science.gov (United States)

    Sousa-Silva, Clara; Yurchenko, Sergei N.; Tennyson, Jonathan

    2013-06-01

    An accurate and comprehensive room temperature rotation-vibration transition line list for phosphine (31PH3) is computed using a newly refined potential energy surface and a previously constructed ab initio electric dipole moment surface. Energy levels, Einstein A coefficients and transition intensities are computed using these surfaces and a variational approach to the nuclear motion problem as implemented in the program TROVE. A ro-vibrational spectrum is computed, covering the wavenumber range 0-8000 cm-1. The resulting line list, which is appropriate for temperatures up to 300 K, consists of a total of 137 million transitions between 5.6 million energy levels. Several of the band centres are shifted to better match experimental transition frequencies. The line list is compared to the most recent HITRAN database and other laboratorial sources. Transition wavelengths and intensities are generally found to be in good agreement with the existing experimental data, with particularly close agreement for the rotational spectrum. An analysis of the comparison between the theoretical data created and the existing experimental data is performed, and suggestions for future improvements and assignments to the HITRAN database are made.

  10. TQ What?: Applying Total Quality Management to Child Care.

    Science.gov (United States)

    Hewes, Dorothy

    1994-01-01

    Discusses the concept of Total Quality Management (TQM), developed by W. Edward Deming and Joseph Juran in 1940s, and its applications for child care centers. Discusses how TQM focuses on customer satisfaction, measuring performance, benchmarking, employee empowerment, and continuous training. Includes a list of suggested readings on TQM. (MDM)

  11. Total System Performance Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Yong Soo; Kang, Chul Hyung; Lee, Youn Myoung; Han, Ji Woong; Choi, Jong Won; Hahn, Pil Soo; Park, Jeong Hwa; Jeong, Mi Seon

    2007-06-15

    Based on the KAERI FEP list developed through the previous studies, the KAERI FEP Encyclopedia has been developed. Current version is 1.0 which includes all relevant FEPs to compose of two references and all alternative scenarios. Many interaction FEPs between scenario defining FEP(SDF) are created throughout the study. FEPs are classified into many Integrated FEP(IFEP) which eventually become the elements of the RES matrix. The FEAS program one of the component of the KAERI's CYPRUS information system is added to develop the FEP, RES, AC, AMF and finally scenarios. It assists to create transparent way to deal with assessment from the stage of the planning of the R and D to the final stage of the external audit and regulatory body review. Even though MASCOT-K and compartment analysis codes such as AMBER, GoldSim and Ecolego are excellent for TSPA they by in heritage possess a certain limitation especially to identify a proper migration cross sectional area when a relatively big component intersects with a tiny one such as a fracture. It is truly 3D phenomena in nature. MDPSA code is developed which is expected to overcome limitations in compartment models while successfully deals with natural disruptive events. The R and D target for the TSPA is to develop the sufficient scenarios and their variation cases to understand the safety of KRS in every possible aspect. For this, reference scenarios, alternative scenarios covering engineered barrier failure and natural events are developed and assessed respectively for around 100 cases. The stylized template to assess the Korean reference biosphere is developed using the AMBER. Three critical groups, agricultural, freshwater and marine water fishing groups are identified to assess the DCF following the guidelines of ICRP. Based on the QA principles of T2R3, the web based QA system is developed using the procedures in the USNRC 10CFR50 Appendix B. The QA system is combined with the PAID and FEAS to create the comprehensive

  12. Total System Performance Assessment

    International Nuclear Information System (INIS)

    Hwang, Yong Soo; Kang, Chul Hyung; Lee, Youn Myoung; Han, Ji Woong; Choi, Jong Won; Hahn, Pil Soo; Park, Jeong Hwa; Jeong, Mi Seon

    2007-06-01

    Based on the KAERI FEP list developed through the previous studies, the KAERI FEP Encyclopedia has been developed. Current version is 1.0 which includes all relevant FEPs to compose of two references and all alternative scenarios. Many interaction FEPs between scenario defining FEP(SDF) are created throughout the study. FEPs are classified into many Integrated FEP(IFEP) which eventually become the elements of the RES matrix. The FEAS program one of the component of the KAERI's CYPRUS information system is added to develop the FEP, RES, AC, AMF and finally scenarios. It assists to create transparent way to deal with assessment from the stage of the planning of the R and D to the final stage of the external audit and regulatory body review. Even though MASCOT-K and compartment analysis codes such as AMBER, GoldSim and Ecolego are excellent for TSPA they by in heritage possess a certain limitation especially to identify a proper migration cross sectional area when a relatively big component intersects with a tiny one such as a fracture. It is truly 3D phenomena in nature. MDPSA code is developed which is expected to overcome limitations in compartment models while successfully deals with natural disruptive events. The R and D target for the TSPA is to develop the sufficient scenarios and their variation cases to understand the safety of KRS in every possible aspect. For this, reference scenarios, alternative scenarios covering engineered barrier failure and natural events are developed and assessed respectively for around 100 cases. The stylized template to assess the Korean reference biosphere is developed using the AMBER. Three critical groups, agricultural, freshwater and marine water fishing groups are identified to assess the DCF following the guidelines of ICRP. Based on the QA principles of T2R3, the web based QA system is developed using the procedures in the USNRC 10CFR50 Appendix B. The QA system is combined with the PAID and FEAS to create the comprehensive

  13. Total System Performance Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Yong Soo; Kang, Chul Hyung; Lee, Youn Myoung; Han, Ji Woong; Choi, Jong Won; Hahn, Pil Soo; Park, Jeong Hwa; Jeong, Mi Seon

    2007-06-15

    Based on the KAERI FEP list developed through the previous studies, the KAERI FEP Encyclopedia has been developed. Current version is 1.0 which includes all relevant FEPs to compose of two references and all alternative scenarios. Many interaction FEPs between scenario defining FEP(SDF) are created throughout the study. FEPs are classified into many Integrated FEP(IFEP) which eventually become the elements of the RES matrix. The FEAS program one of the component of the KAERI's CYPRUS information system is added to develop the FEP, RES, AC, AMF and finally scenarios. It assists to create transparent way to deal with assessment from the stage of the planning of the R and D to the final stage of the external audit and regulatory body review. Even though MASCOT-K and compartment analysis codes such as AMBER, GoldSim and Ecolego are excellent for TSPA they by in heritage possess a certain limitation especially to identify a proper migration cross sectional area when a relatively big component intersects with a tiny one such as a fracture. It is truly 3D phenomena in nature. MDPSA code is developed which is expected to overcome limitations in compartment models while successfully deals with natural disruptive events. The R and D target for the TSPA is to develop the sufficient scenarios and their variation cases to understand the safety of KRS in every possible aspect. For this, reference scenarios, alternative scenarios covering engineered barrier failure and natural events are developed and assessed respectively for around 100 cases. The stylized template to assess the Korean reference biosphere is developed using the AMBER. Three critical groups, agricultural, freshwater and marine water fishing groups are identified to assess the DCF following the guidelines of ICRP. Based on the QA principles of T2R3, the web based QA system is developed using the procedures in the USNRC 10CFR50 Appendix B. The QA system is combined with the PAID and FEAS to create the

  14. Total colourings of graphs

    CERN Document Server

    Yap, Hian-Poh

    1996-01-01

    This book provides an up-to-date and rapid introduction to an important and currently active topic in graph theory. The author leads the reader to the forefront of research in this area. Complete and easily readable proofs of all the main theorems, together with numerous examples, exercises and open problems are given. The book is suitable for use as a textbook or as seminar material for advanced undergraduate and graduate students. The references are comprehensive and so it will also be useful for researchers as a handbook.

  15. Monomers and Monomer Mixtures Used in Impregnation of Fibrous Materials

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1968-10-15

    Some important properties of monomers and polymers in relation to their use for reinforcement of fibrous materials are listed. Some monomers and their properties important in impregnation of fibrous materials are also listed. In general it is not advantageous to use a pure monomer for impregnation but rather a mixture of monomers or a mixture of a monomer and a low molecular weight polymer such as unsaturated polyester. Some of these mixtures which have been well studied in connection with WPC are listed together with some of their properties when used in WPC. Other monomer mixtures may well come in question and other monomers can probably be used. For instance, it is reported from Japan that the cheap monomer ethyleneoxide, which cannot be polymerized by gamma radiation as such, can be polymerized (in bulk) as a mixture with methylmethacrylate. Good results with WPC have generally been obtained without swelling agents but more is grafted if some swelling agent is used, and it is possible that a swelling agent might be useful in the case of fibre-boards. Solvents, plasticizers, crosslinkable natural resins, aromatic chlorinated hydrocarbons, and retardants can be added, and with their use the properties of WPC can be widely modified. For example, a chlorinated wax can act as retardant, can reduce the total dose of radiation and can increase the flame resistance simultaneously.

  16. 20 CFR 718.204 - Total disability and disability causation defined; criteria for determining total disability and...

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Total disability and disability causation... Section 718.204 Employees' Benefits EMPLOYMENT STANDARDS ADMINISTRATION, DEPARTMENT OF LABOR FEDERAL COAL... than those listed in Table B1 (Males) or Table B2 (Females) in Appendix B to this part for an...

  17. The backfilling and sealing of radioactive waste repositories. V. 1. Text - Reference - List of symbols

    International Nuclear Information System (INIS)

    1984-01-01

    The report is in two volumes: Volume 1 contains the main text, the references and a list of symbols, and Volume 2, all the figues, tables and appendices. In Volume 1, backfilling and sealing is considered in relation to the geological, physical and chemical environments. There follows a detailed evaluation of the role and performance of the backfilling and sealing system in terms of thermal, hydraulic, chemical buffering, radionuclide retention, mechanical properties and behaviour as well as longevity. The results of the listing, screening and classification of a comprehensive range of candidate backfill materials are summarized. The different candidate materials are examined

  18. Safeguards Summary Event List (SSEL). Pre-NRC trhough December 31, 1978

    International Nuclear Information System (INIS)

    1978-12-01

    Nine categories of events involving NRC licensed material or licensees are included. As additional information is obtained on an event, it will be incorporated in future editions. The list contains incidents as well as less significant events. The nine categories are: bomb-related (divided into two sections: (a) those events in which a bomb or explosive material was located or an explosion occurred at or in the vicinity of a licensed facility, (b) a complete chronological list), intrusion, missing and/or allegedly stolen, transportation-related, vandalism, arson, firearms-related, sabotage, and miscellaneous

  19. Total Synthesis of Hyperforin.

    Science.gov (United States)

    Ting, Chi P; Maimone, Thomas J

    2015-08-26

    A 10-step total synthesis of the polycyclic polyprenylated acylphloroglucinol (PPAP) natural product hyperforin from 2-methylcyclopent-2-en-1-one is reported. This route was enabled by a diketene annulation reaction and an oxidative ring expansion strategy designed to complement the presumed biosynthesis of this complex meroterpene. The described work enables the preparation of a highly substituted bicyclo[3.3.1]nonane-1,3,5-trione motif in only six steps and thus serves as a platform for the construction of easily synthesized, highly diverse PPAPs modifiable at every position.

  20. Total quality is people

    International Nuclear Information System (INIS)

    Vogel, C.E.

    1991-01-01

    Confronted by changing market conditions and increased global competition, in 1983 the Commercial Nuclear Fuel Division (CNFD) of Westinghouse Electric embarked on an ambitious plan to make total quality the centerpiece of its long-term business strategy. Five years later, the division's efforts in making continuous quality improvement a way of life among its more than 2,000 employees gained national recognition when it was named a charter recipient of the Malcolm Baldridge National Quality Award. What CNFD achieved during the 1980s was a cultural transformation, characterized by an empowered work force committed to a common vision. The company's quality program development strategy is described