Temperature dependence of spin and orbital magnetic moments of Sm 4f electrons in (Sm, Gd)Al2

International Nuclear Information System (INIS)

Qiao, S.; Kimura, A.; Adachi, H.; Iori, K.; Miyamoto, K.; Xie, T.; Namatame, H.; Taniguchi, M.; Tanaka, A.; Muro, T.; Imada, S.; Suga, S.

2005-01-01

X-ray magnetic circular dichroism studies were carried out on (Sm, Gd)Al 2 , a ferromagnet without net magnetization at a certain compensation temperature. For Sm 4f electrons, the following understandings were obtained: the magnitude of expectation value of orbital magnetic moment (m L Sm ) is always larger than that of spin one (m S Sm ), so the cancellation of total spin and orbital magnetic moments cannot be achieved only by Sm 4f electrons and the contributions from Gd ions and conduction electrons are important; when the temperature decreases, the magnitude of both m L Sm and m S Sm increases and the gross magnetic moment due to the Sm 4f electrons monotonically deviates from zero. These results tell us that the temperature dependence of magnetic moments related with the electrons other than Sm 4f ones may play important roles in the subtle adjustment of the total spin and orbital magnetic moments to the zero magnetization at the compensation temperature

Superconductivity in Sm-doped CaFe2As2 single crystals

Science.gov (United States)

Dong-Yun, Chen; Bin-Bin, Ruan; Jia, Yu; Qi, Guo; Xiao-Chuan, Wang; Qing-Ge, Mu; Bo-Jin, Pan; Tong, Liu; Gen-Fu, Chen; Zhi-An, Ren

2016-06-01

In this article, the Sm-doping single crystals Ca1 - x Sm x Fe2As2 (x = 0 ˜ 0.2) were prepared by the CaAs flux method, and followed by a rapid quenching treatment after the high temperature growth. The samples were characterized by structural, resistive, and magnetic measurements. The successful Sm-substitution was revealed by the reduction of the lattice parameter c, due to the smaller ionic radius of Sm3+ than Ca2+. Superconductivity was observed in all samples with onset T c varying from 27 K to 44 K upon Sm-doping. The coexistence of a collapsed phase transition and the superconducting transition was found for the lower Sm-doping samples. Zero resistivity and substantial superconducting volume fraction only happen in higher Sm-doping crystals with the nominal x > 0.10. The doping dependences of the c-axis length and onset T c were summarized. The high-T c observed in these quenched crystals may be attributed to simultaneous tuning of electron carriers doping and strain effect caused by lattice reduction of Sm-substitution. Project supported by the National Natural Science Foundation of China (Grant No. 11474339), the National Basic Research Program of China (Grant Nos. 2010CB923000 and 2011CBA00100), and the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No. XDB07020100).

(Sm,Zr(Fe,Co11.0-11.5Ti1.0-0.5 compounds as new permanent magnet materials

Directory of Open Access Journals (Sweden)

Tomoko Kuno

2016-02-01

Full Text Available We investigated (Sm,Zr(Fe,Co11.0-11.5Ti1.0-0.5 compounds as permanent magnet materials. Good magnetic properties were observed in (Sm0.8Zr0.2(Fe0.75Co0.2511.5Ti0.5 powder containing a limited amount of the α-(Fe, Co phase, including saturation polarization (Js of 1.63 T, an anisotropic field (Ha of 5.90 MA/m at room temperature, and a Curie temperature (Tc of about 880 K. Notably, Js and Ha remained above 1.5 T and 3.70 MA/m, respectively, even at 473 K. The high-temperature magnetic properties of (Sm0.8Zr0.2(Fe0.75Co0.2511.5Ti0.5 were superior to those of Nd2Fe14B.

Probing metastable Sm²⁺ and optically stimulated tunnelling emission in YPO₄: Ce, Sm

DEFF Research Database (Denmark)

Prasad, Amit Kumar; Kook, Myung Ho; Jain, Mayank

2017-01-01

When the model dosimetry system YPO4: Ce3+, Sm3+ is exposed to X-rays, the charge state of the dopants changes, becoming Ce4+ and Sm2+ via hole and electron trapping, respectively which are metastable; the original charge states can be achieved through electron transfer back from Sm2+ to Ce4+ via......) and its temperature dependence to provide insights into thermal quenching, and c) the kinetics of localised recombination from Sm2+ to Ce4+ on nanoseconds to seconds time scales using sub-band-edge excitation....

Evaluation of Radioisotope Production Process of 153Sm and 153Sm-EDTMP Radiopharmaceuticals

International Nuclear Information System (INIS)

Kadarisman; Sri Hastini; Yayan Tahyan; Abidin; Dadang Hafid; Enny Lestari

2007-01-01

Experiments on the process of 153 Sm radioisotope and labeling of 153 Sm-EDTMP radiopharmaceuticals were carried out. This experiments included preparation of Sm 2 O 3 target, dissolution of post irradiation, determination of radioactivity concentration of 153 Sm radioisotope, radionuclide purity, EDTMP labeling, determination of radiochemical purity and pH. In these experiments the total radioactivity 153 Sm product is round about 2845.83 mCi to 36963.31 mCi, or with the radioactivity concentration between 474 mCi/ml to 6160.55 mCi/ml in the SmCl 3 solution form, each its volume is 6.0 ml, and the samarium content is 5.76 mg/ml, and the radionuclide purity of 153 Sm is 100 %. All of the 153 Sm- EDTMP radiopharmaceuticals product are fulfilled requirements the radioactivity concentration, Sm content, radiochemical purity and pH. The radioactivity concentration of 153 Sm-EDTMP radiopharmaceuticals is 37.50 mCi/ml (minimum) to 283.50 mCi/ml (highest). The pH 7.5 were 8 products, and the rest are pH 8.5. Radiochemical purity of 153 Sm-EDTMP are round about 90.00 % to 99.44 %. (author)

Luminescence properties of the Sm-doped borate glasses

International Nuclear Information System (INIS)

Kindrat, I.I.; Padlyak, B.V.; Drzewiecki, A.

2015-01-01

The optical absorption and photoluminescence (emission and excitation) spectra as well as decay kinetics of a series of the Sm-doped glasses with Li 2 B 4 O 7 , LiKB 4 O 7 , CaB 4 O 7 , and LiCaBO 3 compositions were investigated and analysed. The Li 2 B 4 O 7 :Sm, LiKB 4 O 7 :Sm, CaB 4 O 7 :Sm, and LiCaBO 3 :Sm glasses of high optical quality have been obtained from the corresponding polycrystalline compounds in the air atmosphere, using a standard glass technology. On the basis of electron paramagnetic resonance (EPR) and optical spectra analysis it was shown that the samarium impurity is incorporated into the glass network as Sm 3+ (4f 5 , 6 H 5/2 ) ions, exclusively. All observed 4f – 4f transitions of the Sm 3+ centres in the optical absorption and luminescence spectra of the investigated glasses are identified. Most intense emission band of the Sm 3+ ions peaked about 598 nm ( 4 G 5/2 → 6 H 7/2 transition) is characterised by a single exponential decay with typical lifetime values, which depend on the basic glass composition as well as concentration and local structure of the Sm 3+ luminescence centres. The quantum efficiency has been evaluated for observed transitions of the Sm 3+ centres using obtained experimental lifetimes and radiative lifetimes calculated by Judd–Ofelt theory. The calculated high quantum efficiencies and measured quantum yields of luminescence show that the investigated borate glasses are perspective luminescence materials. Energy transfer from the Ce 3+ non-controlled impurity and intrinsic luminescence centres to the Sm 3+ centres has been observed. Peculiarities of the Sm 3+ local structure in the network of investigated glasses have been discussed based on the obtained spectroscopic results and structural data. - Highlights: • The Sm-doped Li 2 B 4 O 7 , LiKB 4 O 7 , CaB 4 O 7 , and LiCaBO 3 glasses of high quality were obtained. • EPR, optical absorption and luminescence spectra of Sm 3+ ions in obtained glasses were

Calorimetric investigation on the Pb-Sm and Sn-Sm alloys

International Nuclear Information System (INIS)

Berrada, A.-E.-A.; Claire, Y.; Chafik el Idrissi, M.; Castanet, R.

1997-01-01

The integral enthalpy of formation of the Sm-Pb and Sm-Sn melts at 1203 K, h f , was determined by direct reaction calorimetry (drop method) in the Pb and Sn rich sides with the help of a high-temperature Tian-Calvet calorimeter. The results can be fitted respectively with reference to the mole fraction of samarium, x, as follows: f /kJmol -1 =x(1-x)(-109.8 -372.0.7x) with 0 Sm f /kJmol -1 =x(1- x)(-277.0+105.4x) with 0 Sm -1 respectively. Such negative values suggest the existence of a strong short-range order in the liquid state. The stoichiometry and the thermal stability of these associations needs additional thermodynamic determinations concerning mainly the free enthalpy of formation. It will be determined by Knudsen-effusion combined with mass spetrometry in a further work. (orig.)

Luminescence properties of the Sm-doped borate glasses

Energy Technology Data Exchange (ETDEWEB)

Kindrat, I.I. [University of Zielona Góra, Institute of Physics, Division of Spectroscopy of Functional Materials, 4a Szafrana Street, 65-516 Zielona Góra (Poland); Padlyak, B.V., E-mail: B.Padlyak@if.uz.zgora.pl [University of Zielona Góra, Institute of Physics, Division of Spectroscopy of Functional Materials, 4a Szafrana Street, 65-516 Zielona Góra (Poland); Vlokh Institute of Physical Optics, 23 Dragomanov Street, 79-005 Lviv (Ukraine); Drzewiecki, A. [University of Zielona Góra, Institute of Physics, Division of Spectroscopy of Functional Materials, 4a Szafrana Street, 65-516 Zielona Góra (Poland)

2015-10-15

The optical absorption and photoluminescence (emission and excitation) spectra as well as decay kinetics of a series of the Sm-doped glasses with Li{sub 2}B{sub 4}O{sub 7}, LiKB{sub 4}O{sub 7}, CaB{sub 4}O{sub 7}, and LiCaBO{sub 3} compositions were investigated and analysed. The Li{sub 2}B{sub 4}O{sub 7}:Sm, LiKB{sub 4}O{sub 7}:Sm, CaB{sub 4}O{sub 7}:Sm, and LiCaBO{sub 3}:Sm glasses of high optical quality have been obtained from the corresponding polycrystalline compounds in the air atmosphere, using a standard glass technology. On the basis of electron paramagnetic resonance (EPR) and optical spectra analysis it was shown that the samarium impurity is incorporated into the glass network as Sm{sup 3+} (4f{sup 5}, {sup 6}H{sub 5/2}) ions, exclusively. All observed 4f – 4f transitions of the Sm{sup 3+} centres in the optical absorption and luminescence spectra of the investigated glasses are identified. Most intense emission band of the Sm{sup 3+} ions peaked about 598 nm ({sup 4}G{sub 5/2} → {sup 6}H{sub 7/2} transition) is characterised by a single exponential decay with typical lifetime values, which depend on the basic glass composition as well as concentration and local structure of the Sm{sup 3+} luminescence centres. The quantum efficiency has been evaluated for observed transitions of the Sm{sup 3+} centres using obtained experimental lifetimes and radiative lifetimes calculated by Judd–Ofelt theory. The calculated high quantum efficiencies and measured quantum yields of luminescence show that the investigated borate glasses are perspective luminescence materials. Energy transfer from the Ce{sup 3+} non-controlled impurity and intrinsic luminescence centres to the Sm{sup 3+} centres has been observed. Peculiarities of the Sm{sup 3+} local structure in the network of investigated glasses have been discussed based on the obtained spectroscopic results and structural data. - Highlights: • The Sm-doped Li{sub 2}B{sub 4}O{sub 7}, LiKB{sub 4}O{sub 7}, Ca

Design, fabrication, and properties of a continuous carbon-fiber reinforced Sm_2O_3/polyimide gamma ray/neutron shielding material

International Nuclear Information System (INIS)

Wang, Peng; Tang, Xiaobin; Chai, Hao; Chen, Da; Qiu, Yunlong

2015-01-01

Highlights: • Sm_2O_3 is used for neutron absorber instead of B_4C, and Sm_2O_3 has a good photon-shielding effect. • Carbon-fiber cloth and polyimide were used to enhance shielding materials’ mechanical behavior and thermal behavior. • Both Monte Carlo method and shielding test were used to evaluate shielding performance of the novel shielding material. - Abstract: The design and fabrication of shielding materials with good heat-resistance and mechanical properties is a major problem in the radiation shielding field. In this paper, based on gamma ray and neutron shielding theory, a continuous carbon-fiber reinforced Sm_2O_3/polyimide gamma ray/neutron shielding material was fabricated by hot-pressing method. The material's application behavior was subsequently evaluated using neutron shielding, photon shielding, mechanical tensile, and thermogravimetric analysis–differential scanning calorimetry tests. The results show that the tensile strength of the novel shielding material exceeds 200 MPa, which makes it of similar strength to aluminum alloy. The material does not undergo crosslinking and decomposition reactions at 300 °C and it can be used in such environments for long periods of time. The continuous carbon-fiber reinforced Sm_2O_3/polyimide material has a good shielding performance with respect to gamma rays and neutrons. The material thus has good prospects for use in fusion reactor system and nuclear waste disposal applications.

Synthesis and photoluminescence properties of Sm3+-doped CaWO4 nanoparticles

International Nuclear Information System (INIS)

Xiao Qi; Zhou Qitao; Li Ming

2010-01-01

The Sm 3+ -doped CaWO 4 nanoparticles were synthesized by hydrothermal method. The room temperature photoluminescence (PL) spectra of Sm 3+ -doped CaWO 4 nanoparticles doped with different Sm 3+ concentrations under 405 nm excitation have been investigated. The PL spectra showed four strong emission peaks at 460, 571, 609, and 653 nm. The first emission peak at 460 nm could be due to a structural defect of the lattice, an oxygen-deficient WO 3 complex. The other three emissions at 571, 609, and 653 nm were due to the f-f forbidden transitions of the 4f electrons of Sm 3+ , corresponding to 4 G 5/2 → 6 H 5/2 (571 nm), 6 H 7/2 (609 nm), and 6 H 9/2 (653 nm), respectively. In addition, the optimum Sm 3+ concentration in CaWO 4 nanoparticles for optical emission was determined to be 1.0%. The Sm 3+4 G 5/2 → 6 H 7/2 (609 nm) emission intensity of Sm 3+ -doped CaWO 4 nanoparticles significantly increased with the increase of Sm 3+ concentration, and showed a maximum when Sm 3+ doping content was 1.0%. If Sm 3+ concentration continued to increase, namely more than 1.0%, the Sm 3+4 G 5/2 → 6 H 7/2 emission intensity would decrease. The present materials might be a promising phosphor for white-light LED applications.

Dielectric spectroscopy of the SmQ* phase

Science.gov (United States)

Perkowski, P.; Bubnov, A.; Piecek, W.; Ogrodnik, K.; Hamplová, V.; Kašpar, M.

2011-11-01

Liquid crystal possessing two biphenyl moieties in the molecular core and lateral chlorine substitution far from the chiral chain has been studied by dielectric spectroscopy. On cooling from the isotropic phase, the material possesses the frustrated smectic Q* (SmQ*) and SmCA* phases. It has been confirmed by dielectric spectroscopy that the SmQ* phase can be related to the SmCA* anti-ferroelectric phase. However, only one relaxation process has been observed in the SmQ* phase, while in the SmCA*, two relaxations are clearly detectable. It seems that the mode found in the SmQ* can be connected with high-frequency anti-phase mode observed in the SmCA* phase. Its relaxation frequency is similar to PH relaxation frequency, but is weaker. The same relaxation has been observed even a few degrees above the SmQ*-Iso phase transition. Another explanation for the mode detected in SmQ* and isotropic phases can be molecular motions around short molecular axis.

Preparation, structural characterization, and enhanced electrical conductivity of pyrochlore-type (Sm{sub 1-x}Eu{sub x}){sub 2}Zr{sub 2}O{sub 7} ceramics

Energy Technology Data Exchange (ETDEWEB)

Xia, X.L. [Institute for Advanced Ceramics, School of Materials Science and Engineering, Harbin Institute of Technology, Harbin (China); Institute of Oceanography Instruments, Shandong Academy of Science, Chinese National Engineering Research Center for Marine Monitoring Equipment, Qingdao (China); Liu, Z.G.; Ouyang, J.H. [Institute for Advanced Ceramics, School of Materials Science and Engineering, Harbin Institute of Technology, Harbin (China); Zheng, Y. [Institute of Oceanography Instruments, Shandong Academy of Science, Chinese National Engineering Research Center for Marine Monitoring Equipment, Qingdao (China)

2012-08-15

(Sm{sub 1-x}Eu{sub x}){sub 2}Zr{sub 2}O{sub 7} (0 {<=} x {<=} 1.0) samples are prepared by solid state reaction method using Sm{sub 2}O{sub 3}, Eu{sub 2}O{sub 3}, and ZrO{sub 2} as starting materials. The phase composition and microstructure of (Sm{sub 1-x}Eu{sub x}){sub 2}Zr{sub 2}O{sub 7} ceramics are investigated by X-ray diffraction (XRD), scanning electron microscopy, high-resolution transmission electron microscopy (HRTEM) coupled with selected area electron diffraction and Raman spectroscopy. XRD and TEM show that all the samples exhibit a single pyrochlore-type structure. HRTEM observation indicates that the whole grain interior of Sm{sub 2}Zr{sub 2}O{sub 7} ceramic is a perfect crystal free of any dislocation. Raman spectroscopy reveals that the degree of structural disorder of (Sm{sub 1-x}Eu{sub x}){sub 2}Zr{sub 2}O{sub 7} ceramics increases gradually with increasing Eu content. The electrical conductivity of (Sm{sub 1-x}Eu{sub x}){sub 2}Zr{sub 2}O{sub 7} ceramics is investigated by impedance spectroscopy in the air and hydrogen atmospheres, respectively. The electrical conductivity of (Sm{sub 1-x}Eu{sub x}){sub 2}Zr{sub 2}O{sub 7} ceramics increases with increasing Eu content at identical temperature levels. Both the activation energy E{sub g} and the pre-exponential factor {sigma}{sub 0g} for the grain conductivity gradually increase with increasing Eu content. As the ionic conductivity shows no obvious change in both air and hydrogen atmospheres, the conduction of (Sm{sub 1-x}Eu{sub x}){sub 2}Zr{sub 2}O{sub 7} is purely ionic with negligible electronic conduction. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Preparation and characterization of SiO2:Sm3+ nanotube arrays with 1.06 μm laser antireflective property

International Nuclear Information System (INIS)

Tan, Wei-min; Huang, Ning; Wang, Li-jun; Song, Tian-shun; Lu, Chun-hua; Wang, Liu-fang; Zhang, Jun-zhi

2013-01-01

SiO 2 : Sm 3+ nanotube arrays with excellent antireflective property at 1.06 μm were synthesized by a template-assisted sol–gel process. The molecular structure, morphology and optical properties of the fabricated SiO 2 :Sm 3+ nanotube arrays were investigated by a Fourier transform infrared spectroscope (FTIR), a Scanning electron microscope (SEM), and a spectro-fluorometer, respectively. The experimental results demonstrate that the SiO 2 :Sm 3+ nanotube arrays were formed via the AAO membrane during the sol–gel process. The remarkable antireflective characteristic of about 0.166% at 1.06 μm was attributed to the drastic decrease of effective refraction index which enhances the matching effect between air and substrate. As well as the absorption performance of Sm3+ at 1.06 μm which consumes the energies of incident light. - Graphical abstract: Directional aligned SiO 2 :Sm 3+ nanotube arrays were synthesized in AAO template by sol–gel process, and the antiflective performance of arrays is prominent comparing to the blank AAO template. Highlights: ► SiO 2 :Sm 3+ nanotube arrays are synthesized by a template-assisted sol–gel process. ► SiO 2 :Sm 3+ nanotube arrays have remarkable antireflective properties at 1.06 μm. ► The subwavelength structure results in a decrease of effective refraction index. ► The absorption performance of Sm 3+ at 1.06 μm consume the energies of incident light

Effect of the addition of Sm2O3 on the microstructure of laser cladding alloy coating layers

Science.gov (United States)

Zhang, Shi Hong; Li, Ming Xi; Cho, Tong Yul; Yoon, Jae Hong; Fang, Wei; Joo, Yun Kon; Kang, Jin Ho; Lee, Chan Gyu

2008-06-01

The effects on the microstructures and phases of coating layers by the addition of micron-sized (m) and nano-sized (n) (m&n) Sm2O3 powders were investigated. The coating materials, which were prepared by means of 2.0 kW CO2 laser cladding, consist of a powder mixture of m Ni-based alloy (NBA) powders comprising 1.5 wt.% m Sm2O3 and 3.0% n Sm2O3 powders. The results indicate that γ-Ni, Cr23C6 and Ni3B are the primary phases of the NBA coatings. The Fe7Sm and Ni3Si phases are highlighted by the addition of m&n Sm2O3 powders. From the substrate, planar crystal layers are first grown in all NBA and m&n Sm2O3/NBA coatings. The dendrite growth then occurs as a result of the addition of the m Sm2O3 powder, and the equiaxed dendrite growth occurs as a result of the addition of the n Sm2O3. With the addition of a rare earth oxide such as Sm2O3 powder, the width of the planar crystal becomes smaller than that of the NBA coating.

Labelling of MoAb with 153SmH1ETA: Preliminary results

International Nuclear Information System (INIS)

Ferro-Flores, G.; De, F.; Ramirez, M.; Pedraza-Lopez, M.; Tendilla, J.I.; Melendez-Alafort, L.; Murphy, C.A.

2001-01-01

A method to label MoAb with Sm-153 using 1,5,9,13-tetraazacyclohexadecane N,N',N'',N''' tetraacetic acid (H 4 ETA) as a bifunctional chelator was developed. H 4 ETA and SmH 1 ETA were synthesized in our laboratory and characterized by IR spectroscopy, TGA (thermogravimetric analysis), SEM (Scattering Electronic Microscopy), EDAX (Elemental Dispersion Analysis by X-rays) and EPR (Electron Paramagnetic Resonance) at 6 K. The 153 SmH 1 ETAMoAb was prepared by a simple incubation of the MoAb ior cea1, and the 153 SmH 1 ETA complex at neutral pH and at room temperature for 24 h. The specific activity of the labelled antibody was 111 MBq/mg (3 mCi/mg). Sm-153(III) is commercially available with specific activities up to 318.2 GBq/mg. Therefore, under the conditions described above 153 SmH 1 ETA labelled MoAb could be obtained with specific activity up to 1.14 GBq/mg (30.7 mCi/mg). (author)

Optical isotype shifts of 146Sm and 151Sm

International Nuclear Information System (INIS)

Eastham, D.A.; Walker, P.M.; Griffith, J.A.R.; Evans, D.E.; England, J.G.; Grant, I.S.

1984-01-01

We have measured the optical isotope shifts of 146 Sm and 151 Sm by laser resonance fluorescence. From these measurements the changes in the mean square nuclear radii are: delta 2 > (A=144 to 146)=0.266(10) fm 2 , and delta 2 > (A=151 to 152)=0.262(10) fm 2 . These results, together with those of the stable isotopes, show that the average nuclear expansion of samarium can be accounted for by the liquid drop model with deformations. (orig.)

Isolated centres versus defect associates in Sm3+-doped CeO2: a spectroscopic investigation

International Nuclear Information System (INIS)

Tiseanu, Carmen; Avram, Daniel; Cojocaru, Bogdan; Parvulescu, Vasile I; Vela-Gonzalez, Andrea V; Sanchez-Dominguez, Margarita

2013-01-01

The interactions between Sm 3+ and oxygen vacancies in CeO 2 are probed by the use of tuneable laser excited time-resolved photoluminescence and Raman spectroscopies. It is found that Sm 3+ (with doping concentrations of 0.1, 0.3, 1 and 5 wt%) substitutes largely for Ce 4+ in sites with cubic symmetry and the corresponding emission is sensitized via the Ce 4+ –O 2− charge-transfer band of CeO 2 . It is established from the photoluminescence spectra measured at long delay after the laser pulse that the local environment around cubic Sm 3+ centres is not changed with concentration and ceria size. In addition to cubic symmetry Sm 3+ centres, low-symmetry Sm 3+ centres tentatively assigned to the Sm 3+ –oxygen vacancy associates of nearest-neighbour type are also observed. Their emission is preferentially excited via the weak f–f absorption transitions of Sm 3+ . A relatively strong concentration-induced quenching of Sm 3+ emission was inferred from the decrease in the average emission lifetimes from 2.1 ms (0.1 wt%) to 0.87 ms (5 wt%). The local environments of Sm 3+ and Eu 3+ in CeO 2 are also compared on the basis of their emission spectra and decays. (paper)

Enhanced protective efficacy of a chimeric form of the schistosomiasis vaccine antigen Sm-TSP-2.

Directory of Open Access Journals (Sweden)

Mark S Pearson

Full Text Available The large extracellular loop of the Schistosoma mansoni tetraspanin, Sm-TSP-2, when fused to a thioredoxin partner and formulated with Freund's adjuvants, has been shown to be an efficacious vaccine against murine schistosomiasis. Moreover, Sm-TSP-2 is uniquely recognised by IgG(1 and IgG(3 from putatively resistant individuals resident in S. mansoni endemic areas in Brazil. In the present study, we expressed Sm-TSP-2 at high yield and in soluble form in E. coli without the need for a solubility enhancing fusion partner. We also expressed in E. coli a chimera called Sm-TSP-2/5B, which consisted of Sm-TSP-2 fused to the immunogenic 5B region of the hookworm aspartic protease and vaccine antigen, Na-APR-1. Sm-TSP-2 formulated with alum/CpG showed significant reductions in adult worm and liver egg burdens in two separate murine schistosomiasis challenge studies. Sm-TSP-2/5B afforded significantly greater protection than Sm-TSP-2 alone when both antigens were formulated with alum/CpG. The enhanced protection obtained with the chimeric fusion protein was associated with increased production of anti-Sm-TSP-2 antibodies and IL-4, IL-10 and IFN-γ from spleen cells of vaccinated animals. Sera from 666 individuals from Brazil who were infected with S. mansoni were screened for potentially deleterious IgE responses to Sm-TSP-2. Anti-Sm-TSP-2 IgE to this protein was not detected (also shown previously for Na-APR-1, suggesting that the chimeric antigen Sm-TSP-2/5B could be used to safely and effectively vaccinate people in areas where schistosomes and hookworms are endemic.

Combustion synthesis of micron-sized Sm2Co17 particles via mechanochemical processing

International Nuclear Information System (INIS)

Liu, W.; McCormick, P.G.

1998-01-01

Full text: The spontaneous formation of Sm 2 Co 17 micron-sized particles via a mechanically induced combustion reaction has been investigated. Sm 2 Co 17 alloy particles of 0.1--2 μm in size embedded in a CaO matrix formed directly via a combustion reaction induced by milling the powder mixture of Sm 2 O 3 , CoO, CaO and Ca over a critical time. The micron-sized Sm 2 Co 17 particles were found to have the TbCu 7 -type structure and characterized by a coercivity value of 7.8 kOe while embedded in the CaO matrix. The effect of subsequent heat treatment on the structure and magnetic properties of as-milled samples was also investigated. Removal of the CaO by a carefully controlled washing process yielded micron-sized Sm 2 Co 17 particles without significant oxidation of the particles. These fine Sm 2 Co 17 particles can be used to produce anisotropic bulk or bonded magnets

Layered SmBaCuCoO5+δ and SmBaCuFeO5+δ perovskite oxides as cathode materials for proton-conducting SOFCs

International Nuclear Information System (INIS)

Nian Qiong; Zhao Ling; He Beibei; Lin Bin; Peng Ranran; Meng Guangyao; Liu Xingqin

2010-01-01

A dense BaCe 0.8 Sm 0.2 O 5+δ (BCS) electrolyte was fabricated on a porous anode by in situ drop-coating to develop a simple and cost-effective route to fabricate proton-conducting solid oxide fuel cells (SOFCs). Layered perovskite-structure oxides SmBaCuCoO 5+δ (SBCC) and SmBaCuFeO 5+δ (SBCF) were prepared and the electrical conductivity, the thermal expansion coefficient and electrochemical performance were investigated as potential cathode materials for proton-conducting SOFCs. Thermal expansion coefficients of SBCC and SBCF were suitable for BCS electrolyte and the electrical conductivity of the SBCC is higher than that of the SBCF. The maximum power density of 449 mW cm 2 and 333 mW cm 2 at 700 o C were obtained for the SBCC/BCS/NiO-BCS and SBCF/BCS/NiO-BCS cells, respectively. The interfacial polarization resistances for SBCC and SBCF cathode are as low as 0.137 Ω cm -2 and 0.196 Ω cm -2 at 700 o C, respectively. The results indicate that the SBCC and SBCF are promising cathode materials for proton-conducting SOFCs.

Cross-species prophylactic efficacy of Sm-p80-based vaccine and intracellular localization of Sm-p80/Sm-p80 ortholog proteins during development in Schistosoma mansoni, Schistosoma japonicum, and Schistosoma haematobium.

Science.gov (United States)

Molehin, Adebayo J; Sennoune, Souad R; Zhang, Weidong; Rojo, Juan U; Siddiqui, Arif J; Herrera, Karlie A; Johnson, Laura; Sudduth, Justin; May, Jordan; Siddiqui, Afzal A

2017-11-01

Schistosomiasis remains a major global health problem. Despite large-scale schistosomiasis control efforts, clear limitations such as possible emergence of drug resistance and reinfection rates highlight the need for an effective schistosomiasis vaccine. Schistosoma mansoni large subunit of calpain (Sm-p80)-based vaccine formulations have shown remarkable efficacy in protecting against S. mansoni challenge infections in mice and baboons. In this study, we evaluated the cross-species protective efficacy of Sm-p80 vaccine against S. japonicum and S. haematobium challenge infections in rodent models. We also elucidated the expression of Sm-p80 and Sm-p80 ortholog proteins in different developmental stages of S. mansoni, S. haematobium, and S. japonicum. Immunization with Sm-p80 vaccine reduced worm burden by 46.75% against S. japonicum challenge infection in mice. DNA prime/protein boost (1 + 1 dose administered on a single day) resulted in 26.95% reduction in worm burden in S. haematobium-hamster infection/challenge model. A balanced Th1 (IFN-γ, TNF-α, IL-2, and IL-12) and Th2 (IL-4, IgG1) type of responses were observed following vaccination in both S. japonicum and S. haematobium challenge trials and these are associated with the prophylactic efficacy of Sm-p80 vaccine. Immunohistochemistry demonstrated that Sm-p80/Sm-p80 ortholog proteins are expressed in different life cycle stages of the three major human species of schistosomes studied. The data presented in this study reinforce the potential of Sm-p80-based vaccine for both hepatic/intestinal and urogenital schistosomiasis occurring in different geographical areas of the world. Differential expression of Sm-p80/Sm-p80 protein orthologs in different life cycle makes this vaccine potentially useful in targeting different levels of infection, disease, and transmission.

Tuning the Magnetic Properties and Structural Stabilities of the 2-17-3 Magnets Sm2Fe17X3 (X =C , N) by Substituting La or Ce for Sm

Science.gov (United States)

Pandey, Tribhuwan; Du, Mao-Hua; Parker, David S.

2018-03-01

Designing a permanent magnet with reduced critical rare-earth content is of paramount importance in the development of cost-effective modern technologies. By performing comprehensive first-principles calculations, we investigate the potential avenues for reducing the critical rare-earth content in Sm2Fe17N3 and Sm2Fe17C3 by making a La or Ce substitution for Sm. The calculated magnetic properties of base compounds are in good agreement with the previous low-temperature (4.2-K) experimental measurements, and they show a large axial anisotropy. Although La or Ce substitution results in a slight reduction of magnetic anisotropy, the magnetic moments of Fe atoms mostly remain unchanged. Specifically, large axial anisotropies of 7.2 and 4.1 MJ /m3 are obtained for SmCeFe17 N3 and SmLaFe17 N3 , respectively. These values of anisotropies are comparable to the state-of-the-art permanent magnet Nd2 Fe14 B . The foremost limitation of Sm2 Fe17X3 magnets for practical application is the formation nitrogen or carbon vacancies at high temperatures. By calculating the N- (C)- vacancy formation energy, we show that La or Ce substitution enhances the vacancy formation energy. This enhanced vacancy formation energy will likely improve the thermodynamic stability of these alloys at high temperatures. Therefore, La- or Ce-substituted Sm2Fe17C3 and Sm2Fe17N3 compounds are promising candidates for high-performance permanent magnets with substantially reduced rare-earth content.

Modified chemical synthesis of porous α-Sm{sub 2}S{sub 3} thin films

Energy Technology Data Exchange (ETDEWEB)

Kumbhar, V.S.; Jagadale, A.D. [Thin Film Physics Laboratory, Department of Physics, Shivaji University, Kolhapur, (M.S.) 416004 (India); Gaikwad, N.S. [Rayat Shikshan Sanstha, Satara, (M.S.) 415 001 (India); Lokhande, C.D., E-mail: l_chandrakant@yahoo.com [Thin Film Physics Laboratory, Department of Physics, Shivaji University, Kolhapur, (M.S.) 416004 (India)

2014-08-15

Highlights: • A novel chemical route to prepare α-Sm{sub 2}S{sub 3} thin films. • A porous honeycomb like morphology of the α-Sm{sub 2}S{sub 3} thin film. • An application of α-Sm{sub 2}S{sub 3} thin film toward its supercapacitive behaviour. - Abstract: The paper reports synthesis of porous α-Sm{sub 2}S{sub 3} thin films using modified chemical synthesis, also known as successive ionic layer adsorption and reaction (SILAR) method. The X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), atomic force microscopy (AFM), wettability and ultraviolet–visible spectroscopy (UV–vis) techniques are used for the study of structural, elemental, morphological and optical properties of α-Sm{sub 2}S{sub 3} films. An orthorhombic crystal structure of α-Sm{sub 2}S{sub 3} is resulted from XRD study. The SEM and AFM observations showed highly porous α-Sm{sub 2}S{sub 3} film surface. An optical band gap of 2.50 eV is estimated from optical absorption spectrum. The porous α-Sm{sub 2}S{sub 3} thin film tuned for supercapacitive behaviour using cyclic voltammetry and galvanostatic charge discharge showed a specific capacitance and energy density of 294 Fg{sup –1} and 48.9 kW kg{sup –1}, respectively in 1 M LiClO{sub 4}–propylene carbonate electrolyte.

Evaluation of the exothermicity of the chemi-ionization reaction Sm + O → SmO+ + e−

International Nuclear Information System (INIS)

Cox, Richard M; Kim, JungSoo; Armentrout, P. B.; Bartlett, Joshua; VanGundy, Robert A.; Heaven, Michael C.; Ard, Shaun G.; Shuman, Nicholas S.; Viggiano, Albert A.; Melko, Joshua J.

2015-01-01

The exothermicity of the chemi-ionization reaction Sm + O → SmO + + e − has been re-evaluated through the combination of several experimental methods. The thermal reactivity (300–650 K) of Sm + and SmO + with a range of species measured using a selected ion flow tube-mass spectrometer apparatus is reported and provides limits for the bond strength of SmO + , 5.661 eV ≤ D 0 (Sm + -O) ≤ 6.500 eV. A more precise value is measured to be 5.72 5 ± 0.07 eV, bracketed by the observed reactivity of Sm + and SmO + with several species using a guided ion beam tandem mass spectrometer (GIBMS). Combined with the established Sm ionization energy (IE), this value indicates an exothermicity of the title reaction of 0.08 ± 0.07 eV, ∼0.2 eV smaller than previous determinations. In addition, the ionization energy of SmO has been measured by resonantly enhanced two-photon ionization and pulsed-field ionization zero kinetic energy photoelectron spectroscopy to be 5.7427 ± 0.0006 eV, significantly higher than the literature value. Combined with literature bond energies of SmO, this value indicates an exothermicity of the title reaction of 0.14 ± 0.17 eV, independent from and in agreement with the GIBMS result presented here. The evaluated thermochemistry also suggests that D 0 (SmO) = 5.83 ± 0.07 eV, consistent with but more precise than the literature values. Implications of these results for interpretation of chemical release experiments in the thermosphere are discussed

The ferromagnetic Kondo-lattice compound SmFe sub 4 P sub 1 sub 2

CERN Document Server

Takeda, N

2003-01-01

We report on the magnetic properties of a filled skutterudite compound, SmFe sub 4 P sub 1 sub 2. Magnetic susceptibility and specific heat measurements revealed a ferromagnetic transition at 1.6 K. The temperature dependence of the electrical resistivity exhibits a Kondo-lattice behaviour and the electronic specific heat coefficient attains values as large as 370 mJ mol sup - sup 1 K sup - sup 2. This compound is thereby the first Sm-based heavy-fermion system found with a ferromagnetic ground state. The Kondo temperature is estimated to be about 30 K. (letter to the editor)

Gamma ray irradiation characteristics of SM fibers

International Nuclear Information System (INIS)

Ito, Ryuichi; Okano, Hiroaki; Hashiba, Keichi; Nakai, Hisanori

1987-01-01

1.3 μm range single mode (SM) optical fibers have been used for wide application of mainly long distance communication. At present, in order to realize the larger capacity and longer distance between relay points, the development of 1.5 μm range SM fibers of low dispersion and small loss has been actively promoted. As for the radiation withstanding property of SM fibers, report is scarce. The authors reported on the gamma ray irradiation characteristics of 1.3 μm range SM fibers, but since 1.5 μm range SM fibers are designed with the different structure from that of 1.3 μm fibers, it is necessary to evaluate from new viewpoint. In this report, mainly on the structure having triangular distribution, the effect that the manufacturing condition and the structural defects of glass exert on the gamma ray irradiation characteristics is described. The specimens were mainly dispersion shift type fibers (DSF), and for comparison, single window, double window and 1.3 μm SM fibers were examined. Co-60 gamma ray was irradiated, and the optical loss and electron spin resonance were measured. By low temperature and low speed drawing, the good result in the optical loss was obtained. The presence of oxygen at the time of sintering materials had no effect. The dependence of the ESR on the drawing condition was not very remarkable. (Kako, I.)

Detection of antifungal properties in Lactobacillus paracasei subsp. paracasei SM20, SM29, and SM63 and molecular typing of the strains.

Science.gov (United States)

Schwenninger, Susanne Miescher; von Ah, Ueli; Niederer, Brigitte; Teuber, Michael; Meile, Leo

2005-01-01

Lactobacilli isolated from different food and feed samples such as raw milk, cheese, yoghurt, olives, sour dough, as well as corn and grass silage, were screened for their antifungal activities. Out of 1,424 isolates tested, 82 were shown to be inhibitory to different yeasts (Candida spp. and Zygosaccharomyces bailii) and a Penicillium sp., which were previously isolated from spoiled yoghurt and fruits. Carbohydrate fermentation patterns suggested that a substantial portion, 25%, belonged to the Lactobacillus casei group, including L. casei, L. paracasei, and L. rhamnosus. The isolates SM20 (DSM14514), SM29 (DSM14515), and SM63 (DSM14516) were classified by PCR using species-specific primers to target the corresponding type strains (L. casei, L. paracasei, and L. rhamnosus) as controls. Further molecular typing methods such as randomly amplified polymorphic DNA, pulsed-field gel electrophoresis, and sequencing analysis of the 16S rRNA gene allowed classifying strains SM20, SM29, and SM63 as L. paracasei subsp. paracasei in accordance with the new reclassification of the L. casei group proposed by Collins et al.

Effect of Sr doping on structural and magnetic behavior of SmBa1-xSrxCo2O5+δ (x = 0 and 1)

Science.gov (United States)

Kumari, Archana; Dhanasekhar, C.; Das, A. K.

2018-05-01

Layered double perovskite, SmBa1-xSrxCo2O5+δ (x = 0, δ = 0.5 and x = 1, δ = 1) samples were prepared by solid state reaction method. X-ray diffraction studies show that the SmBaCo2O5.5 sample crystallizes in the orthorhombic crystal structure with Pmmm space group, whereas SmSrCo2O6 sample crystallizes in the orthorhombic crystal structure with Pnma space group. The temperature dependent magnetization of the SmBaCo2O5.5 sample shows a paramagnetic (PM)-ferromagnetic (FM) and a FM-antiferromagnetic (AFM) transitions at TC = 267 K and TN = 221 K, respectively. In contrast, the SmSrCo2O6 sample shows a PM-FM transition at TC = 175 K. According to Goodenough-Kanamori-Anderson rules, the ferromagnetic behavior in SmSrCo2O6 can be understood from the super exchange interaction between the intermediate spin Co3+ and low spin Co4+ via O2- (IS Co3+ -O2- - LS Co4+). The change in magnetic entropy (ΔSMmax) is found to be maximum for the SmSrCo2O6 sample.

Crystal structure of Sm(NO3)3x6H2O

International Nuclear Information System (INIS)

Espenbetov, A.A.; Gerr, R.G.; Struchkov, Yu.T.; Sal'nikova, N.A.; Akimov, V.M.; Odinets, Z.K.

1985-01-01

X-ray diffraction study of a salt, prepared when mixing concentrated nitric acid solutions of NaNO 3 and Sm(NO 3 ) 3 , has been carried out. It is established, that the salt is a concretion of two crystals: NaNO 3 and Sm(NO 3 ) 3 x6H 2 O (1). X-ray diffraction study of 1 is carried out (lambda Mo, diffractometer, 1511 reflections, the method of heavy atom, the least square method in anisotropic approximation up to R=0.0348). The crystals of 1 are triclinic: a=6.755, b=9.168, c=11.684 A, α=69.93, β=88.86, γ=69.28, Z=2, Fedorov group P anti 1. Symmetery of 10-vertex coordination polyhedron (CP) of Sm atom is close to Csub(s). Sm atom coordination can be described as 4;5:1. Four H 2 O molecules are included into CP, at the expense of two remaining H 2 O molecules CP are bound with each other

Emission properties of Sm(III) complex having ten-coordination structure

International Nuclear Information System (INIS)

Hasegawa, Yasuchika; Tsuruoka, Shin-ichi; Yoshida, Takahiko; Kawai, Hideki; Kawai, Tsuyoshi

2008-01-01

Sammarium(III) complex having ten-coordination structure, bis-(1,10-phenanthroline)tris-(hexafluoroacetylacetonato)samarium(III) (Sm(hfa) 3 (phen) 2 ) was prepared by chelation of tris-(hexafluoroacetylacetonato) samarium(III) (Sm(hfa) 3 (H 2 O) 2 ) with 1,10-phenantroline (phen). The characteristic ten-coordination structure of Sm(hfa) 3 (phen) 2 was determined by 1 H NMR and elemental analyses. Strong deep-red emission (λ max =643 nm) and narrow emission band (FWHM=5 nm) of Sm(hfa) 3 (phen) 2 originated from electronic allowed transition from characteristics ten coordinate structure. The emission quantum yields Sm(hfa) 3 (phen) 2 excited at absorption bands of ligands and Sm(III) ion were found to be 0.36 and 1.4%, respectively

SmShb, the SH2-Containing Adaptor Protein B of Schistosoma mansoni Regulates Venus Kinase Receptor Signaling Pathways.

Directory of Open Access Journals (Sweden)

Marion Morel

Full Text Available Venus kinase receptors (VKRs are invertebrate receptor tyrosine kinases (RTKs formed by an extracellular Venus Fly Trap (VFT ligand binding domain associated via a transmembrane domain with an intracellular tyrosine kinase (TK domain. Schistosoma mansoni VKRs, SmVKR1 and SmVKR2, are both implicated in reproductive activities of the parasite. In this work, we show that the SH2 domain-containing protein SmShb is a partner of the phosphorylated form of SmVKR1. Expression of these proteins in Xenopus oocytes allowed us to demonstrate that the SH2 domain of SmShb interacts with the phosphotyrosine residue (pY979 located in the juxtamembrane region of SmVKR1. This interaction leads to phosphorylation of SmShb on tyrosines and promotes SmVKR1 signaling towards the JNK pathway. SmShb transcripts are expressed in all parasite stages and they were found in ovary and testes of adult worms, suggesting a possible colocalization of SmShb and SmVKR1 proteins. Silencing of SmShb in adult S. mansoni resulted in an accumulation of mature sperm in testes, indicating a possible role of SmShb in gametogenesis.

SmShb, the SH2-Containing Adaptor Protein B of Schistosoma mansoni Regulates Venus Kinase Receptor Signaling Pathways.

Science.gov (United States)

Morel, Marion; Vanderstraete, Mathieu; Cailliau, Katia; Hahnel, Steffen; Grevelding, Christoph G; Dissous, Colette

2016-01-01

Venus kinase receptors (VKRs) are invertebrate receptor tyrosine kinases (RTKs) formed by an extracellular Venus Fly Trap (VFT) ligand binding domain associated via a transmembrane domain with an intracellular tyrosine kinase (TK) domain. Schistosoma mansoni VKRs, SmVKR1 and SmVKR2, are both implicated in reproductive activities of the parasite. In this work, we show that the SH2 domain-containing protein SmShb is a partner of the phosphorylated form of SmVKR1. Expression of these proteins in Xenopus oocytes allowed us to demonstrate that the SH2 domain of SmShb interacts with the phosphotyrosine residue (pY979) located in the juxtamembrane region of SmVKR1. This interaction leads to phosphorylation of SmShb on tyrosines and promotes SmVKR1 signaling towards the JNK pathway. SmShb transcripts are expressed in all parasite stages and they were found in ovary and testes of adult worms, suggesting a possible colocalization of SmShb and SmVKR1 proteins. Silencing of SmShb in adult S. mansoni resulted in an accumulation of mature sperm in testes, indicating a possible role of SmShb in gametogenesis.

Thermoanalytical investigation of the hydrogen absorption behaviour of Sm2Fe17-xGax at high hydrogen pressures

International Nuclear Information System (INIS)

Handstein, A.; Kubis, M.; Gebel, B.; Mueller, K.-H.; Schultz, L.; Gutfleisch, O.; Harris, I.R.; Birmingham Univ.

1998-01-01

The complete disproportionation of Sm 2 Fe 17-x Ga x during annealing in hydrogen is hindered due to an increased stability of the compounds with a higher Ga content (x ≥ 1). Therefore the HD process as the first step of HDDR (hydrogenation-disproportionation-desorption-recombination) has to be carried out at a high hydrogen pressure for x ≥ 1. The hydrogen absorption behaviour of Sm 2 Fe 17-x Ga x (x = 0, 0.5, 1 and 2) was investigated by means of hydrogen differential thermal analysis (HDTA) and high pressure differential scanning calorimetry (HPDSC) at hydrogen pressures up to 70 bar. A dependency of hydrogenation and disproportionation temperatures on hydrogen pressure and Ga content was found. The comparison with other substituents (M = Al and Si) instead of M = Ga showed an increased stability of Sm 2 Fe 17-x M x compounds against disproportionation by hydrogen in the sequence Al, Ga and Si. The Curie temperatures of the interstitially hydrogenated Th 2 Zn 17 -type materials increase with the hydrogen pressure. In order to produce coercive and thermally stable Sm 2 Fe 15 Ga 2 C y powder by means of the HDDR process, we recombined material disproportionated at different hydrogen pressures. Preliminary results of magnetic properties of this HDDR treated and gas-carburized Sm 2 Fe 15 Ga 2 C y are discussed. (orig.)

Low temperature preparation and superconductivity of F-doped SmFeAsO

Energy Technology Data Exchange (ETDEWEB)

Chen, Y.L.; Cui, Y.J. [Key Laboratory of Magnetic Levitation Technologies and Maglev Trains (Ministry of Education of China), Superconductivity R and D Center (SRDC), Mail Stop 165, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); Cheng, C.H. [School of Materials Science and Engineering, University of New South Wales, Sydney, 2052 NSW (Australia); Yang, Y.; Wang, L.; Li, Y.C.; Zhang, Y. [Key Laboratory of Magnetic Levitation Technologies and Maglev Trains (Ministry of Education of China), Superconductivity R and D Center (SRDC), Mail Stop 165, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); Zhao, Y., E-mail: yzhao@swjtu.edu.c [Key Laboratory of Magnetic Levitation Technologies and Maglev Trains (Ministry of Education of China), Superconductivity R and D Center (SRDC), Mail Stop 165, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); School of Materials Science and Engineering, University of New South Wales, Sydney, 2052 NSW (Australia)

2010-11-01

A low temperature (1100 deg. C) process of preparing F-doped SmFeAsO samples has been developed using SmF{sub 3} with nanometer scale as the source of fluorine. A series of the SmFeAsO{sub 1-x}F{sub x} (x = 0, 0.05, 0.1, 0.15, 0.2, 0.25, 0.3) samples have been prepared using the present method. Compared with previous reports, the present SmF{sub 3} is more effective to introduce F into SmFeAsO system in which a transition temperature of 39 K can be observed when x = 0.05. The superconductivity is definitely enhanced with the increasing F-doping level. All the samples presented to be layered structure and the crystal particle size is about three times larger with sintering time increasing from 36 h to 48 h. Except for the nanometer scale of SmF{sub 3}, the flux effect of SmF{sub 3} is recognized to be another reason for the decrease of the sintering temperature. Further more, a relatively large amount of SmF{sub 3} was also employed in the raw materials to introduce excessive F and this has induced higher T{sub c} (55 K) in SmFeAsO{sub 0.8}F{sub 0.2+{delta}}system.

Hydrogen-induced amorphization of SmFe{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Kubis, M.; Handstein, A.; Gebel, B.; Gutfleisch, O.; Mueller, K.-H.; Schultz, L. [Institut fuer Festkoerper- und Werkstofforschung Dresden e.V. (Germany). Inst. fuer Metallische Werkstoffe

2000-07-01

The hydrogen absorption behavior of SmFe{sub 3} (PuNi{sub 3}-type structure) was observed in the range from 0.05 to 4 MPa by differential scanning calorimetry. The structural changes were observed by X-ray diffraction measurements. For pressures below 0.8 MPa two exothermic reactions were found which are attributed (i) to the interstitial absorption and (ii) to the disproportionation into SmH{sub 2} and {alpha}-Fe. For higher hydrogen pressures, the second exothermic peak occured at significantly lower temperatures and splitted into two peaks. The first one was identified as the exothermic signal of the hydrogen-induced amorphization of the SmFe{sub 3} hydride. The second peak is caused by the precipitation of SmH{sub 2} and {alpha}-Fe from the amorphous material. (orig.)

Sm2FeTaO7 Photocatalyst for Degradation of Indigo Carmine Dye under Solar Light Irradiation

Directory of Open Access Journals (Sweden)

Leticia M. Torres-Martínez

2012-01-01

Full Text Available This paper is focused to study Sm2FeTaO7 pyrochlore-type compound as solar photocatalyst for the degradation of indigo carmine dye in aqueous solution. Sm2FeTaO7 was synthesized by using conventional solid state reaction and sol-gel method. X-ray diffraction results indicated that Sm2FeTaO7 exhibit a monoclinic crystal structure. By scanning electron microscopy analysis, it was observed that sol-gel material presents particle size of around 150 nm. The specific surface area and energy bandgap values were 12 m2 g−1 and 2.0 eV, respectively. The photocatalytic results showed that indigo carmine molecule can be degraded under solar light irradiation using the synthesized materials, sol-gel photocatalyst was 8 times more active than solid state. On the other hand, when Sm2FeTaO7 was impregnated with CuO as cocatalyst the photocatalytic activity was increased because CuO acts as electron trap decreasing electron-hole pair recombination rates.

Luminescence and energy transfer of Sm3+ and Eu3+ in Ca2PO4Cl

International Nuclear Information System (INIS)

Wang, Zhijun; Li, Panlai; Yang, Zhiping; Guo, Qinglin

2014-01-01

Sm 3+ , Eu 3+ , and Sm 3+ –Eu 3+ doped Ca 2 PO 4 Cl phosphors are synthesized by a solid-state method. Ca 2 PO 4 Cl:Sm 3+ can produce red emission under the 400 nm radiation excitation, and the emission peak is located at 601 nm, which is assigned to the 4 G 5/2 → 6 H 7/2 transition of Sm 3+ . Ca 2 PO 4 Cl:Eu 3+ can create red emission under the 392 nm radiation excitation, and the strongest peak is located at 620 nm, which is attributed to the 5 D 0 → 7 F 2 transition of Eu 3+ . The energy transfer from Sm 3+ to Eu 3+ in Ca 2 PO 4 Cl has been validated and the critical distance (R c ) of Sm 3+ to Eu 3+ in Ca 2 PO 4 Cl is calculated to be 1.14 nm. With increasing Eu 3+ doping concentration, the energy transfer efficiency (Sm 3+ →Eu 3+ ) gradually increases to 53.7%. The luminescence property of Ca 2 PO 4 Cl:Sm 3+ , Eu 3+ can be tuned by properly tuning the relative ratio of Sm 3+ –Eu 3+ , and the emission intensity of Ca 2 PO 4 Cl:Eu 3+ can be greatly enhanced by codoped Sm 3+ . - Highlights: • Ca 2 PO 4 Cl:Sm 3+ , Eu 3+ can produce red emission under the 400 nm radiation excitation. • The energy transfer from Sm 3+ to Eu 3+ in Ca 2 PO 4 Cl has been validated. • The critical distance of Sm 3+ to Eu 3+ in Ca 2 PO 4 Cl is calculated to be 1.14 nm

Assessment of microseeds biodegradability of Sm and Sm:Ba splenic implants in rabbits

International Nuclear Information System (INIS)

Siqueira, Savio Lana; Barroso, Thiago Vinicius Villar; Campos, Tarcisio P.R.

2009-01-01

The radioactive interstitial implants have applications in controlling neoplasm in several regions of the human body. Currently the permanent brachytherapy seeds implanted in the spleen and other organs are made of I-125 seeds. After the total emission of radiation, the metal encapsulated seed remains inert in the implanted area. Seeds of bioactive ceramics have been prepared with Sm-152 incorporation to be activated in Sm-153. This study aimed to develop surgical technique for implanting biodegradable micro-seeds in the spleen of the rabbit. Three micro-seeds were introduced by hypodermic needle in the spleen in eight rabbits by median laparotomy. Subsequently, there were clinical and functional reactions of the animal to the implanted foreign body. The other objective was to perform the animal monitoring by radiography, produced in time sequence, and pathological studies of a fragment of the spleens of rabbits. The results show the effectiveness of surgery, the identification of the implanted material by radiography in vivo, and the biocompatibility of micro-seeds most of Sm and Sm:Ba. These seeds of reduced volume, 0.3x 1.6 mm, could be monitored for radiological studies in 2 periods: early and later implant. On the later studies, radiography was taken at 60d post-implant. Biopsies were taken and radiographs of the samples were also performed for evidencing the degradation state of the seeds. The results of the two groups of four rabbits are presented. They show partial degradation of the seed verified by radiographic contrast which is related to the atomic number of the elements and mass density in the seed. The biopsy showed that the ceramic is clearly absorbed by the spleen tissue and form tissue-implant interface. The histological slides showed an inflammatory reaction with presence of fibrosis of the giant cell foreign body. In conclusion, the radiograph shows a suitable noninvasive technique for monitoring the degradation of micro-seed ceramics in vivo

Assessment of microseeds biodegradability of Sm and Sm:Ba splenic implants in rabbits

Energy Technology Data Exchange (ETDEWEB)

Siqueira, Savio Lana; Barroso, Thiago Vinicius Villar [Faculdade de Ciencias Medicas de Minas Gerais, Belo Horizonte, MG (Brazil). Dept. de Anatomia; Campos, Tarcisio P.R., E-mail: campos@nuclear.ufmg.b [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Programa de Ciencias e Tecnicas Nucleares

2009-07-01

The radioactive interstitial implants have applications in controlling neoplasm in several regions of the human body. Currently the permanent brachytherapy seeds implanted in the spleen and other organs are made of I-125 seeds. After the total emission of radiation, the metal encapsulated seed remains inert in the implanted area. Seeds of bioactive ceramics have been prepared with Sm-152 incorporation to be activated in Sm-153. This study aimed to develop surgical technique for implanting biodegradable micro-seeds in the spleen of the rabbit. Three micro-seeds were introduced by hypodermic needle in the spleen in eight rabbits by median laparotomy. Subsequently, there were clinical and functional reactions of the animal to the implanted foreign body. The other objective was to perform the animal monitoring by radiography, produced in time sequence, and pathological studies of a fragment of the spleens of rabbits. The results show the effectiveness of surgery, the identification of the implanted material by radiography in vivo, and the biocompatibility of micro-seeds most of Sm and Sm:Ba. These seeds of reduced volume, 0.3x 1.6 mm, could be monitored for radiological studies in 2 periods: early and later implant. On the later studies, radiography was taken at 60d post-implant. Biopsies were taken and radiographs of the samples were also performed for evidencing the degradation state of the seeds. The results of the two groups of four rabbits are presented. They show partial degradation of the seed verified by radiographic contrast which is related to the atomic number of the elements and mass density in the seed. The biopsy showed that the ceramic is clearly absorbed by the spleen tissue and form tissue-implant interface. The histological slides showed an inflammatory reaction with presence of fibrosis of the giant cell foreign body. In conclusion, the radiograph shows a suitable noninvasive technique for monitoring the degradation of micro-seed ceramics in vivo

Preparation and quality control of {sup 153}Sm radiopharmaceuticals

Energy Technology Data Exchange (ETDEWEB)

Swasono, R Tamat; Widyastuti, W; Purwadi, B; Laksmi, I [Radioisotope Production Center - BATAN, Jakarta (Indonesia)

1998-10-01

The paper summarizes the preparation and quality control of {sup 153}Sm-EDTMP and three {sup 153}Sm-radiosynovectomy agents. Natural and enriched Sm{sub 2}O{sub 3} (98.7% {sup 152}Sm) irradiated in RSG-GAS 30 MW reactor yielded pure and high specific activity {sup 153}Sm. Labeling of EDTMP with {sup 153}Sm was carried out by mixing {sup 153}SmCl{sub 3} solution of pH 4.0 to an EDTMP solution at room temperature then pH adjustment to 8. The {sup 153}Sm-EDTMP complex was separated from the free {sup 153}Sm{sup +3} on a Chelex 100 column. Radiochemical purity was determined by thin layer chromatography using Cellulose sheets and pyridine: ethanol: water (1: 2: 4) mixture as solvent. The {sup 153}Sm-EDTMP has been shown to be stable for two weeks. Three particulate preparations of {sup 153}Sm used for the irradiation of chronic synovitis have been studied. They are hydroxyapatite particles, human serum albumin microspheres and ferric hydroxide macroaggregates. The {sup 153}Sm-ferric hydroxide macroaggregates were prepared in a single step by coprecipitation of {sup 153}Sm in the formation of Fe(OH){sub 3}. Preparation of {sup 153}Sm-labelled hydroxyapatite particles and {sup 153}Sm-labelled albumin microspheres were carried out by {sup 153}Sm labelling of previously prepared particles. Radiolabelling efficiency were greater than 95% for hydroxyapatite particles and macroaggregates and was lower than 20% for albumin microspheres. The particle sizes were inspected using an optical microscope with a haemocytometer and micrometric ocular. (author)

Nanocrystallization in Cu-Zr-Al-Sm Bulk Metallic Glasses

Science.gov (United States)

Sikan, Fatih; Yasar, Bengisu; Kalay, Ilkay

2018-04-01

The effect of rare-earth element (Sm) microalloying on the thermal stability and crystallization kinetics of melt-spun ribbons and suction-cast rods of Zr48Cu38.4Al9.6Sm4 alloy were investigated using differential scanning calorimetry (DSC), X-ray diffraction (XRD), transmission electron microscopy (TEM), and atom probe tomography (APT). The XRD results of constant heating rate annealing indicated that amorphous Zr48Cu38.4Al9.6Sm4 melt-spun ribbons devitrifies into Cu2Sm at 673 K (400 °C). The sequence continues with the precipitation of Cu10Zr7 and then these two phases coexist. XRD and TEM studies on 1 mm diameter as suction-cast rods indicated the precipitation of 30-nm-mean size Cu2Sm crystals during solidification. TEM investigation of the isothermal crystallization sequence of melt-spun ribbons and 1-mm-diameter suction-cast rods revealed the precipitation of Cu2Sm nanocrystals at the onset of crystallization and the restriction of the growth of these nanocrystals up to 10 nm diameter with further annealing. APT analysis of 1-mm-diameter suction-cast rods showed that the limited growth of Cu2Sm nanocrystals is due to sluggish diffusion of Sm and Al-Zr pile up at the interface.

Distinguishing a SM-like MSSM Higgs boson from SM Higgs boson ...

Indian Academy of Sciences (India)

We explore the possibility of distinguishing the SM-like MSSM Higgs boson from the SM Higgs boson via Higgs boson pair production at future muon collider. We study the behavior of the production cross-section in SM and MSSM with Higgs boson mass for various MSSM parameters tan and A. We observe that at fixed ...

Preparation and Luminescent Properties of the antibacterial materials of the La3+ Doped Sm3+-Hydroxyapatite

Science.gov (United States)

Lv, Yuguang; Shi, Qi; Jin, Yuling; Ren, Hengxin; Qin, Yushan; Wang, Bo; Song, Shanshan

2018-03-01

In this paper, the La3+-doped Sm3+ hydroxyapatite (La/Sm/HAP) complexes were prepared by a precipitation method. The sample was defined by IR spectra, fluorescence spectra and X ray diffraction analysis et al. The structure of complexes were discussed. The emission wavelength of heat treatment of Sm3+ do not change, but will affect the intensity of the peak Sm3+ luminescence properties and the occupy hydroxyapatite in the lattice Ca( II )and Ca( I ) loci with Sm3+ doped concentration and the proportion of the sintering temperature change and change: The nano hydroxyapatite complex of the La3+ doped samarium obtain the good fluorescence intensity, by La3+ doping content of Sm3+ were hydroxyapatite 6% (La3+, Sm3+ mole ratio) device. The complex of La3+ doped samarium HAP have Stable chemical property, fluorescence property and excellent biological activity. The ligand HAP absorbs energy or captures an electron-hole pair and then transfers it to the lanthanide ions. The catalytic activity influence of the La3+-doped Sm3+hydroxyapatite was discussed, the La/Sm/HAP had excellent antibacterial property, which used as potential biological antibacterial material.

Crystalline α-Sm2S3 nanowires: Structure and optical properties of an unusual intrinsically degenerate semiconductor

International Nuclear Information System (INIS)

Marin, Chris M.; Wang, Lu; Brewer, Joseph R.; Mei, Wai-Ning; Cheung, Chin Li

2013-01-01

Highlights: ► Developed a rapid synthetic method to generate thin films of α-Sm 2 S 3 nanowires. ► Calculated the electronic structure of α-Sm 2 S 3 by density functional theory. ► Predicted that α-Sm 2 S 3 is an intrinsically degenerate p-type semiconductor. ► Found that the gap in the band states of α-Sm 2 S 3 could be engineered to 1.3 eV via sulfur vacancy. -- Abstract: The lanthanide sulfides have long been a promising class of semiconductors because of their infrared-to-visible range band gaps and excellent thermoelectric properties. However, their applications have been limited due to their time consuming conventional synthetic processes and the lack of sufficient understanding of their electronic properties. To address these shortcomings, here we report a rapid, chemical vapor deposition route which results in thin films of crystalline α-phase samarium sesquisulfide (α-Sm 2 S 3 ) nanowires within a few hours, rather than the typical 4–7 days required in previous synthetic processes. In addition, density functional theory was, for the first time, utilized to calculate the electronic band structure of α-Sm 2 S 3 in order to shed insight into the interpretation of their UV–Vis absorption spectrum. We found that the theoretical direct gap in the band states of α-Sm 2 S 3 is 1.7 eV. Computation results suggest that this gap can be tuned to a solar optimal ∼1.3 eV via systematic sulfur vacancy sites engineered into the crystal structure. Most significantly, the degenerate semiconductor-like behavior long observed in lanthanide sulfide samples have been shown to be present even in the ideal α-Sm 2 S 3 structure, suggesting that the observed heavily p-type behavior is an unusual intrinsic property of the material resulting from the Fermi level being located significantly below the optically active 1.7 eV band edge

SM18 Visits and Access

CERN Multimedia

2012-01-01

  VISITS The rules and conditions to be followed for visits in the SM18 Hall are laid out in the EDMS 1205328 document. No visit is allowed without prior reservation.   ACCESS Special access right is needed ONLY from 7 p.m. to 7 a.m. and during week-ends. From 1 December, the current SM18 access database will be closed and a new one “SM18-OWH outside normal hours” started from scratch. Requests, via EDH SM18-OWH, will have to be duly justified.   For further information, please contact Evelyne Delucinge.

24/7 SM slavery.

Science.gov (United States)

Dancer, Peter L; Kleinplatz, Peggy J; Moser, Charles

2006-01-01

This study describes the nature of 24/7 SM slavery as practiced within the SM (sadomasochistic) community. These SM participants, who attempt to live full-time in owner-slave roles, represent a small proportion of those with SM interests. SM slaves have not been studied systematically to determine if and how they differ from other SM practitioners. An online questionnaire was used to obtain responses from individuals who self-identified as slaves. A total of 146 respondents participated, 53% female and 47% male, ranging in age from 18 to 72. We explored the depth of their relationships, how well they approximated "slavery," and how their relationships were structured to maintain distinct roles. Data showed that in long-term SM slave relationships, a power differential exists which extends beyond time-limited SM or sexual interactions. Owners and slaves often use common, daily life experiences or situations, such as the completion of household chores, money management, and morning or evening routines, to distinguish and maintain their respective roles. In addition, contrary to the perception of total submission, results revealed that slaves exercise free will when it is in their best interests to do so. These relationships were long-lasting and satisfying to the respondents.

Transcription Factor SmWRKY1 Positively Promotes the Biosynthesis of Tanshinones in Salvia miltiorrhiza

Directory of Open Access Journals (Sweden)

Wenzhi Cao

2018-04-01

Full Text Available Tanshinones, one group of bioactive diterpenes, were widely used in the treatment of cardiovascular diseases. WRKYs play important roles in plant metabolism, but their regulation mechanism in Salvia miltiorrhiza remains elusive. In this study, one WRKY transcription factor SmWRKY1 was isolated and functionally characterized from S. miltiorrhiza. Multiple sequence alignment and phylogenetic tree analysis showed SmWRKY1 shared high homology with other plant WRKYs such as CrWRKY1. SmWRKY1 was found predominantly expressed in leaves and stems, and was responsive to salicylic acid (SA, methyl jasmonate (MeJA, and nitric oxide (NO treatment. Subcellular localization analysis found that SmWRKY1 was localized in the nucleus. Over-expression of SmWRKY1 significantly elevated the transcripts of genes coding for enzymes in the MEP pathway especially 1-deoxy-D-xylulose-5-phosphate synthase (SmDXS and 1-deoxy-D-xylulose-5-phosphate reductoisomerase (SmDXR, resulted in over fivefold increase in tanshinones production in transgenic lines (up to 13.7 mg/g DW compared with the control lines. A dual-luciferase (Dual-LUC assay showed that SmWRKY1 can positively regulate SmDXR expression by binding to its promoter. Our work revealed that SmWRKY1 participated in the regulation of tanshinones biosynthesis and acted as a positive regulator through activating SmDXR in the MEP pathway, thus provided a new insight to further explore the regulation mechanism of tanshinones biosynthesis.

Characterization on the coatings of Ni-base alloy with nano- and micron-size Sm2O3 addition prepared by laser deposition

International Nuclear Information System (INIS)

Zhang Shihong; Li Mingxi; Yoon, Jae Hong; Cho, Tong Yul

2008-01-01

The coating materials are the powder mixture of micron-size Ni-base alloy powders with both 1.5 wt.% micron-size and nano-size Sm 2 O 3 powders, which are prepared on Q235 steel plate by 2.0 kW CO 2 laser deposition. The results indicate that with rare earth oxide Sm 2 O 3 addition, the width of planar crystallization is smaller than that of the Ni-base alloy coatings. Micron- and nano-Sm 2 O 3 /Ni-base alloy coatings have similar microstructure showing the primary phase of γ-Ni dendrite and eutectic containing γ-Ni and Cr 23 C 6 phases. However, compared to micron-Sm 2 O 3 /Ni-base alloy, preferred orientation of γ-Ni dendrite of nano-Sm 2 O 3 /Ni-base alloy is weakened. Planar crystal of several-μm thickness is first grown and then dendrite growth is observed at 1.5% micron-Sm 2 O 3 /Ni-base alloy coating whereas equiaxed dendrite is grown at 1.5% nano-Sm 2 O 3 /Ni-base alloy coating. Hardness and wear resistance of the coating improves with decreasing Sm 2 O 3 size from micron to nano. The improvement on tribological property of nano-Sm 2 O 3 /Ni-base alloy over micron-Sm 2 O 3 /Ni-base alloy coatings can be attributed to the better resistance of equiaxed dendrite to adhesion interactions during the wear process. In 6 M HNO 3 solution, the corrosion resistance is greatly improved with nano-Sm 2 O 3 addition since the decrease of corrosion ratio along grain-boundary in nano-Sm 2 O 3 /Ni-base alloy coating contributes to harmonization of corrosion potential

Distinguishing a SM-like MSSM Higgs boson from SM Higgs boson at muon collider

International Nuclear Information System (INIS)

Singhal, Jai Kumar; Singh, Sardar; Nagawat, Ashok K.

2007-01-01

We explore the possibility of distinguishing the SM-like MSSM Higgs boson from the SM Higgs boson via Higgs boson pair production at future muon collider. We study the behavior of the production cross-section in SM and MSSM with Higgs boson mass for various MSSM parameters tanβ and m A . We observe that at fixed CM energy, in the SM, the total cross-section increases with the increase in Higgs boson mass whereas this trend is reversed for the MSSM. The changes that occur for the MSSM in comparison to the SM predictions are quantified in terms of the relative percentage deviation in cross-section. The observed deviations in cross-section for different choices of Higgs boson masses suggest that the measurements of the cross-section could possibly distinguish the SM-like MSSM Higgs boson from the SM Higgs boson. (author)

Hydrogenation-disproportionation-desorption-recombination in Sm2Fe16M (M=Al, Ga and Si) and magnetic properties of their carburized powders

International Nuclear Information System (INIS)

Kubis, M.; Rave, W.; Cao, L.; Gebel, B.; Mueller, K.-H.; Schultz, L.

1998-01-01

The application of the hydrogenation-disproportionation-desorption-recombination (HDDR) process in Sm 2 Fe 16 M (M=Al,Ga and Si) was investigated. The hydrogen absorption behaviour was studied by temperature-pressure analysis (TPA). In the temperature range between 500 and 800 C, Sm 2 Fe 16 M samples with M=Ga and Si show a weaker hydrogen absorption than Sm 2 Fe 16 Al. This was confirmed by X-ray diffraction which showed a complete disproportionation of Sm 2 Fe 16 Al into SmH z (1.9 2 Fe 16 Ga and Sm 2 Fe 16 Si exhibit a fraction of undecomposed material with the Th 2 Zn 17 -type structure after the disproportionation procedure. These results point to a stabilization of Sm 2 Fe 16 M against disproportionation by hydrogen for M=Ga and Si. The magnetization processes of carburized HDDR powders were studied by VSM measurements and Kerr microscopy. The demagnetization curve of our HDDR processed Sm 2 Fe 16 AlC y is well shaped, whereas those of Sm 2 Fe 16 GaC y and Sm 2 Fe 16 SiC y show a large decrease of the polarization at low fields. The favourable behaviour of Sm 2 Fe 16 AlC y is due to a homogeneous submicron grain structure. In Sm 2 Fe 16 GaC y and Sm 2 Fe 16 SiC y samples, an additional, magnetically soft phase with larger domains was observed which causes the low coercivity. As a consequence, HDDR was only favourable for the preparation of Sm 2 Fe 16 MC y hard magnets with M=Al but not for M=Ga and Si. Optimization of the HDDR process in Sm 2 Fe 16 Al and subsequent nitrogenation or carburization led to coercivities of μ 0j H c =2.9 and 2.5 T, respectively. (orig.)

Magneto-optical imaging of iron-oxypnictide SmFeAsO1-xFx and SmFeAsO1-y

International Nuclear Information System (INIS)

Tamegai, T.; Nakajima, Y.; Tsuchiya, Y.; Iyo, A.; Miyazawa, K.; Shirage, P.M.; Kito, H.; Eisaki, H.

2009-01-01

We have prepared iron-oxypnictide SmFeAsO 1-x F x by ambient-pressure technique and SmFeAsO 1-y by high-pressure technique, and characterized their bulk and local magnetic properties by using SQUID magnetometer and magneto-optical imaging. While the high-pressure samples have densities close to the theoretical value, the ambient-pressure samples have several small voids. Despite these structural differences between the two kinds of samples, they both have superconducting transition temperature above 50 K. In addition, magneto-optical images for both samples show similar kinds of inhomogeneities with large current concentrated in several grains and with small intergranular current. The estimated intragranular currents for both samples are over 10 5 A/cm 2 at low temperatures and low fields.

The simultaneous mass and energy evaporation (SM2E) model.

Science.gov (United States)

Choudhary, Rehan; Klauda, Jeffery B

2016-01-01

In this article, the Simultaneous Mass and Energy Evaporation (SM2E) model is presented. The SM2E model is based on theoretical models for mass and energy transfer. The theoretical models systematically under or over predicted at various flow conditions: laminar, transition, and turbulent. These models were harmonized with experimental measurements to eliminate systematic under or over predictions; a total of 113 measured evaporation rates were used. The SM2E model can be used to estimate evaporation rates for pure liquids as well as liquid mixtures at laminar, transition, and turbulent flow conditions. However, due to limited availability of evaporation data, the model has so far only been tested against data for pure liquids and binary mixtures. The model can take evaporative cooling into account and when the temperature of the evaporating liquid or liquid mixture is known (e.g., isothermal evaporation), the SM2E model reduces to a mass transfer-only model.

Excited states in 146Sm and 147Sm

International Nuclear Information System (INIS)

Kownacki, J.; Sujkowski, Z.; Hammaren, E.; Liukkonen, E.; Piiparinen, M.; Lindblad, Th.; Ryde, H.

1979-10-01

The sup(144,146)Nd(α,xn) and sup(146,148)Nd( 3 He,xn) reactions with Esub(α) = 20 - 43 MeV and E 3 sub(He) = 19 - 27 MeV are used to investigate excited states in the isotopes 146 Sm and 147 Sm. The experiments involve measurements of singles γ-ray spectra and conversion electron spectra, γ-ray angular distributions and three parameter (E sub(γ)E sub(γ) time) coincidences. From these experiments information is obtained for states with spin up to I = 13 + and I = 27/2 - , respectively, These states are interpeted within the framework of the cluster-vibration model (CVM) as well as the shell model. (author)

Thermogravimetric and Magnetic Studies of the Oxidation and Reduction Reaction of SmCoO3 to Nanostructured Sm2O3 and Co

Science.gov (United States)

Kelly, Brian; Cichocki, Ronald; Poirier, Gerald; Unruh, Karl

The SmCoO3 to nanostructured Sm2O3 and Co oxidation and reduction reaction has been studied by thermogravimetric analysis (TGA) measurements in forming gas (FG) and inert N2 atmospheres, x-ray diffraction (XRD) and vibrating sample magnetometry (VSM). The TGA measurements showed two clearly resolvable reduction processes when heating in FG, from the initial SmCoO3 phase through an intermediate nanostructured mixture of Sm2O3 and CoO when heated to 330°C for several minutes, and then the conversion of CoO to metallic Co when heated above 500°C. These phases were confirmed by XRD and VSM. Similar measurements in N2 yielded little mass change below 900°C and coupled reduction processes at higher temperatures. Isoconversional measurements of the CoO to Co reduction reaction in FG yielded activation energies above 2eV/atom in the nanostructured system. This value is several times larger than those reported in the literature or obtained by similar measurements of bulk mixtures of Sm2O3 and CoO, suggesting the nanostructuring was the source of the large increase in activation energy.

Fabrication and properties of SmFe2-PZT magnetoelectric thin films

KAUST Repository

Giouroudi, Ioanna

2013-05-17

Magnetoelectric (ME) thin film composites are attracting a continually increasing interest due to their unique features and potential applications in multifunctional microdevices and integrated units such as sensors, actuators and energy harvesting modules. By combining piezoelectric and highly magnetostrictive thin films, the potentialities of these materials increase. In this paper we report the fabrication of SmFe2 and PZT thin films and the investigation of their properties. First of all, a ~ 400 nm thin SmFe film was deposited on top of Si/SiO2 substrate by magnetron sputter deposition. Afterwards, a 140 nm Pt bottom electrode was sputtered on top of the SmFe film forming a bottom electrode. Spin coating was employed for the deposition of the 150 nm thin PZT layer. A PZT solution with 10 %Pb excess was utilized for this fabrication step. Finally, circular Pt top electrodes were sputtered as top electrodes. This paper focuses on the microstructure of the individual films characterized by X-Ray diffractometer (XRD) and scanning electron microscopy (SEM). A piezoelectric evaluation system, aixPES, with TF2000E analyzer component was used for the electric hysteresis measurements of PZT thin films and a vibrating sample magnetometer (VSM) was employed for the magnetic characterization of the SmFe. The developed thin films and the fabricated double layer SmFe-PZT exhibit both good ferromagnetic and piezoelectric responses which predict a promising ME composite structure. The quantitative chemical composition of the samples was confirmed by energy dispersive spectroscopy (EDX). © (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

Fabrication and properties of SmFe2-PZT magnetoelectric thin films

KAUST Repository

Giouroudi, Ioanna; Alnassar, Mohammed; Kosel, Jü rgen

2013-01-01

Magnetoelectric (ME) thin film composites are attracting a continually increasing interest due to their unique features and potential applications in multifunctional microdevices and integrated units such as sensors, actuators and energy harvesting modules. By combining piezoelectric and highly magnetostrictive thin films, the potentialities of these materials increase. In this paper we report the fabrication of SmFe2 and PZT thin films and the investigation of their properties. First of all, a ~ 400 nm thin SmFe film was deposited on top of Si/SiO2 substrate by magnetron sputter deposition. Afterwards, a 140 nm Pt bottom electrode was sputtered on top of the SmFe film forming a bottom electrode. Spin coating was employed for the deposition of the 150 nm thin PZT layer. A PZT solution with 10 %Pb excess was utilized for this fabrication step. Finally, circular Pt top electrodes were sputtered as top electrodes. This paper focuses on the microstructure of the individual films characterized by X-Ray diffractometer (XRD) and scanning electron microscopy (SEM). A piezoelectric evaluation system, aixPES, with TF2000E analyzer component was used for the electric hysteresis measurements of PZT thin films and a vibrating sample magnetometer (VSM) was employed for the magnetic characterization of the SmFe. The developed thin films and the fabricated double layer SmFe-PZT exhibit both good ferromagnetic and piezoelectric responses which predict a promising ME composite structure. The quantitative chemical composition of the samples was confirmed by energy dispersive spectroscopy (EDX). © (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

Measurement of N and C diffusion in Sm2Fe17 by magnetic relaxation

International Nuclear Information System (INIS)

Mommer, N.; Hirscher, M.; Gerlach, M.; Van Lier, J.; Kronmueller, H.; Kubis, M.; Mueller, K.-H.

1998-01-01

Magnetic after-effect (MAE) measurements of nitrided and carburized Sm 2 Fe 17 compounds were performed in the temperature range of 140 K to 480 K. Both nitrided and carburized compounds show relaxation maxima at 285 and 300 K, respectively, which are absent in pure Sm 2 Fe 17 compounds. Therefore, these relaxation maxima are attributed to jumps of interstitially dissolved nitrogen or carbon atoms. Numerical evaluation yielded an activation enthalpy Q N (0.84±0.05) eV and a pre-exponential factor τ 0 N =3.10 -15±1 s for the short-range diffusion of N atoms. The corresponding values for the carbon diffusion are Q C =(0.91±0.05) eV and τ 0 C =1.10 -15±1 s. The carbon and nitrogen content of the samples was determined from the increase in mass during nitrogenation or carburization to Sm 2 Fe 17 N 1.2 and Sm 2 Fe 17 C 2.6 . (orig.)

Thermochemical studies on complex of [Sm(o-NBA)_3phen]_2

Institute of Scientific and Technical Information of China (English)

肖圣雄; 张建军; 李旭; 李强国; 任宁; 李环

2010-01-01

A ternary complex [Sm(o-NBA)3phen]2 (o-NBA: o-Nitrobenzoate; phen: 1,10-phenanthroline) was synthesized and characterized by elemental analysis, IR, molar conductance, and thermogravimetric analysis. The dissolution enthalpies of SmCl3·6H2O(s), o-HNBA(s) and phen·H2O(s) in mixed solvent (VHCl :VDMF :VDMSO=2:2:1) were determined by calorimetry at 298.15 K. The enthalpy change of the reaction was determined to be rHmΔθ=252.49±1.60 kJ/mol. Using the relevant data in the literature and a thermochemical recycle ...

Strategisch management (SM)

NARCIS (Netherlands)

Nagel, A.P.; Vercouteren, W.J.J.C.; Hoek, van der N.; Lohman, T.A.M.; Vermeulen, N.

1996-01-01

Kernbegrippen die bij de discussie van strategisch management (SM) aan de orde komen, zijn productinnovatie op ondernemingsniveau (oftewel strategische productinnovatie, SPI) en technologiestrategie. In dit artikel wordt een raamwerk van SM geintroduceerd. Daartoe worden de verschillende fasen van

Electronic structure and magnetic anisotropy of Sm2Fe17Nx

Science.gov (United States)

Akai, Hisazumi; Ogura, Masako

2014-03-01

Electronic structure and magnetic properties of Sm2Fe17Nx are studies on the basis of the first-principles electronic structure calculation in the framework of the density functional theory within the local density and coherent potential approximations. The magnetic anisotropy of the system as a function of nitrogen concentration x is discussed by taking account not only of the crystal field effects but also of the effects of the f-electron transfer from Sm to the neighboring sites. Also discussed is the magnetic transition temperature that is estimated by mapping the system into a Heisenberg model. The results show the crystalline magnetic anisotropy changes its direction from in-plane to uniaxial ones as x increases. It takes the maximum value near x ~ 2 . 8 and then decreases slightly towards x = 3 . The mechanism for these behaviors is discussed in the light of the results of detailed calculations on the bonding properties between Sm and its neighboring N. This work was partly supported by Elements Strategy Initiative Center for Magnetic Materials Project, the Ministry of Education, Culture, Sports, Science and Technology, Japan.

The microwave absorbing properties of SmCo attached single wall carbon nanotube/epoxy composites

International Nuclear Information System (INIS)

Yu, Liming; Li, Bo; Sheng, Leimei; An, Kang; Zhao, Xinluo

2013-01-01

Highlights: •The SmCo nanoparticles attached SWCNTs were prepared by dc arc discharge method. •The nano-composite prepared by a rare earth permanent magnet Sm 2 Co 17 as catalyst. •The SmCo attached SWCNT/epoxy composites have an excellent electromagnetic matching characteristics. •The reflection loss and bandwidth below −20 dB of the composite can reach −23.7 dB, 6.2 GHz, respectively. -- Abstract: The SmCo nanoparticles attached single wall carbon nanotubes (SmCo attached SWCNTs) were prepared by hydrogen dc arc discharge method using 2:17 type SmCo permanent powder as catalyst. The SmCo attached SWCNT/epoxy composites with different doping ratios were investigated in the frequency region of 2–18 GHz. The complex permittivity and permeability of the SmCo attached SWCNT/epoxy composites were calculated. The reflection loss properties were simulated by transmission line theory and the microwave absorptive mechanisms were discussed. The results indicate that, due to the better interfacial polarization absorption mechanism of SmCo attached SWCNTs and the electromagnetic (EM) matching of magnetic loss and dielectric loss, the microwave absorption properties of SmCo attached SWCNT/epoxy are evidently improved. When the SmCo attached SWCNTs is doped by 1 wt%, the composite display a larger and wider absorption peak, and the bandwidth of the reflection loss below −20 dB is larger than 6 GHz with the thickness of 3.3 mm. It is expected that the new SmCo attached SWCNT/epoxy composites will be a good microwave absorbing material for the applications in X band, Ku band, or even K band

New NaSrPO4:Sm phosphor as orange-red emitting material

Indian Academy of Sciences (India)

Because NaSr1−xPO4:xSm3+ phosphor features a high colour-rendering index and chemical stability, it is potentially ... use blue LED chips (GaN or InGaN) with a yellow phosphor ... excitation by doping Sm3+ rare earth ions into a suitable.

Low temperature features of the local structure of Sm1-xYxS

International Nuclear Information System (INIS)

Menushenkov, A. P.; Chernikov, R. V.; Sidorov, V. V.; Klementiev, K. V.; Alekseev, P. A.; Rybina, A. V.

2007-01-01

The particular features of the local electronic and local crystal structures of the mixed-valence compound Sm 1-x Y x S are studied by the XAFS spectroscopy methods in the temperature range 20-300 K for the yttrium concentration x = 0.17, 0.25, 0.33, and 0.45. The temperature behavior of the valence of Sm, as well as of the lengths and the Debye-Waller factors of the bonds Sm-S, Sm-Sm(Y), Y-S, and Y-Sm(Y), has been determined. The violation of the Vegard law has been observed. A model for the estimation of the energy width of the 4f level and of its position with respect to the Fermi level is proposed

Enhancing Sm{sup 3+} red emission via energy transfer from Bi{sup 3+}→Sm{sup 3+} based on terbium bridge mechanism in Ca{sub 2}Al{sub 2}SiO{sub 7} phosphors

Energy Technology Data Exchange (ETDEWEB)

Li, Minhong; Wang, LiLi; Ran, Weiguang; Ren, Chunyan; Song, Zeling; Shi, Jinsheng, E-mail: jsshiqn@aliyun.com

2017-04-15

Currently, the key change for white-LED is to improve the luminescence efficiency of red phosphor. Sm{sup 3+} activated phosphor was considered due to suitable emission position of red light. However, the luminescence intensity in the red region is weak. For enhancing red-emitting of Sm{sup 3+}, Bi{sup 3+} and Tb{sup 3+} ions were introduced into Ca{sub 2}Al{sub 2}SiO{sub 7}:Sm{sup 3+} phosphors based on the concept of energy transfer. For Ca{sub 2}Al{sub 2}SiO{sub 7}:Bi{sup 3+}, Sm{sup 3+} samples, it can be observed that the energy transfer process was blocked. Hence, Tb{sup 3+} was introduced into Ca{sub 2}Al{sub 2}SiO{sub 7}:Bi{sup 3+}, Sm{sup 3+} samples to increase Sm{sup 3+} luminescence intensity based on Bi{sup 3+}→Tb{sup 3+}→Sm{sup 3+} energy transfer process. Compared with Sm{sup 3+} single-doped Ca{sub 2}Al{sub 2}SiO{sub 7} phosphor, the luminescence intensity of Sm{sup 3+} was enhanced by 2.6 times. It can be found that Tb{sup 3+} ions play a role of storing the energy or transfer bridge from Bi{sup 3+}→ Sm{sup 3+} by investigating the Ca{sub 2}Al{sub 2}SiO{sub 7}:Bi{sup 3+}, Tb{sup 3+} and Ca{sub 2}Al{sub 2}SiO{sub 7}:Tb{sup 3+}, Sm{sup 3+} energy transfer mechanism. All these results suggest that terbium branch mechanism plays an important role on enhancing activators luminescence intensity.

Phase evolution and its effects on the magnetic performance of nanocrystalline SmCo7 alloy

International Nuclear Information System (INIS)

Zhang Zhexu; Song Xiaoyan; Xu Wenwu

2011-01-01

The evolution of the phase constitution and the microstructure, as well as their effects on magnetic performance, were investigated systematically using a prepared nanocrystalline single-phase SmCo 7 alloy as the starting material for a series of annealing processes. The SmCo 7 (1:7 H) phase was discovered to have a good single-phase stability from room temperature up to 600 deg. C. The destabilization of the SmCo 7 phase results in the formation of the Sm 2 Co 17 (2:17 R) and SmCo 5 (1:5 H) phases, which exist as phase-transformation twins and particulate precipitates, respectively, with a completely coherent relationship with the 1:7 H parent phase. For the first time the formation mechanism of the 2:17 R phase-transformation twins has been proposed, in which the ordered substitution of 1/3 of the Sm atoms by Co-Co dumbbell pairs along two particular crystal directions was demonstrated. The characteristic width values of the 2:17 R phase-transformation twins, as deduced from this model of the mechanism, were unambiguously verified by the experimental results. Among the SmCo 7 alloys with various phase constitutions and microstructures, the best magnetic properties were obtained in the nanocrystalline 1:7 H single-phase alloys. The present work may promote a new understanding of nanoscale-stabilized single-phase SmCo 7 and its potential applications as unique high-temperature permanent magnets.

In vivo and in vitro binding assay of 153Sm-EDTMP

International Nuclear Information System (INIS)

Chen Daming; Wang Yuqing; Jin Xiaohai; Fan Hongqiang; Bai Hongsheng; Jia Bin; Zhang Jingming

1999-01-01

With the waters ultra hydrogel TM 120 μm hplc column (7.7 mm x 300 mm), several experiments have been finished, including the in vitro binding assay of 153 Sm-EDTMP, 153 SmCl 3 with the Cys, BSA, mouse plasma; HPLC analysis of the urine and the extracting solution of liver homogenate after having injected the 153 Sm-EDTMP and 153 SmCl 3 2h; HPLC analysis of the production ( 153 Sm-EDTMP) radiation self-decomposition with large dose. For the HPLC analysis, the condition is the mobile phase of 0.85 mol/mL PBS (pH7.5), flow rate of 0.5 mL/min, sampling of 15 μL. The results are following: (1) The 153 SmCl 3 not only is able to bind with the mouse plasma in vitro, but also is able to be absorbed by liver in vivo; (2) 153 Sm-EDTMP is not bind with the mouse plasma, the Cys and BSA in vitro and vivo; 153 Sm-EDTMP is not found in the extracted solution of liver homogenate at n(EDTMP): n(Sm) ≥ 5:1; 153 Sm-EDTMP is not decomposed in the urine, 1 53 Sm-EDTMP is stable in vivo; (3) 153 Sm-EDTMP radiation self-decomposition is not detected with large dose in the term of validity (6 d), but two small degradation peaks have been found in the production solution after 60 d, the radiochemistry purity of production is always great than 98% during the period

Mechanochemical synthesis of magnetically hard anisotropic RFe{sub 10}Si{sub 2} powders with R representing combinations of Sm, Ce and Zr

Energy Technology Data Exchange (ETDEWEB)

Gabay, A.M., E-mail: gabay@udel.edu; Hadjipanayis, G.C.

2017-01-15

Alloy synthesis consisting of mechanical activation followed by annealing was explored as a method of manufacturing medium-grade permanent magnet materials with a reduced content of the critical rare earth elements. Four R{sub x}Fe{sub 10}Si{sub 2} alloys with R=Sm, Sm{sub 0.7}Zr{sub 0.3}, Sm{sub 0.3}Ce{sub 0.3}Zr{sub 0.4} and Ce{sub 0.6}Zr{sub 0.4} (nominal compositions) were prepared from mixtures of Sm{sub 2}O{sub 3}, CeO{sub 2}, ZrO{sub 2}, Fe{sub 2}O{sub 3} and Si powders in the presence of a reducing agent Ca and a CaO dispersant. The collected alloy particles typically consisted of few joined submicron crystals. For R=Sm, X-ray diffraction analysis reveals a significant amount of the unwanted Th{sub 2}Zn{sub 17}-type compound forming alongside the desired ThMn{sub 12}-type 1:12 compound. A more pure 1:12 phase could be obtained for R=Ce{sub 0.6}Zr{sub 0.4}, but it exhibited a room-temperature coercivity of less than 1 kOe. The most pure 1:12 phase and the highest values of the coercivity (10.8 kOe) and calculated maximum energy product (13.8 MGOe) were obtained for R=Sm{sub 0.7}Zr{sub 0.3} processed at 1150 °C. The calculated maximum energy products of the Sm{sub 0.3}Ce{sub 0.3}Zr{sub 0.4}Fe{sub 10}Si{sub 2} particles, with half of their rare earths constituents represented by the relatively abundant Ce, was 10.1 MGOe. - Highlights: • 30% Zr substitution for Sm improves prospects of the alloys as permanent magnets. • Pure ThMn{sub 12}-type structure could only be obtained in the Zr-substituted alloys. • Obtained powders exhibit better properties than nanocrystalline Sm(Fe,M){sub 12} alloys. • If fully dense, alloy containing only 2.3 at% Sm would energy product of 10 MGOe.

In-flight fast-timing measurements in "1"5"2Sm

International Nuclear Information System (INIS)

Plaisir, C.; Gaudefroy, L.; Meot, V.; Blanc, A.; Daugas, J.M.; Roig, O.; Arnal, N.; Bonnet, T.; Gobet, F.; Hannachi, F.; Tarisien, M.; Versteegen, M.; Roger, T.; Rejmund, M.; Navin, A.; Schmitt, C.; Fremont, G.; Goupil, J.; Pancin, J.; Spitaels, C.; Zielinska, M.

2014-01-01

We report on the first application of in-flight fast-timing measurements, a method developed in order to directly measure lifetimes in the picosecond to nanosecond range. As a proof of principle of the method, lifetimes of the states belonging to the ground-state band in "1"5"2Sm are measured up to the 8"+_1 state. An excellent agreement with recommended values is found. A slightly improved determination of the spectroscopic quadrupole moment of the 4"+_1 state is also reported. In-flight fast-timing measurements open interesting opportunities for future studies of collective properties in radioactive nuclei. (authors)

AC susceptibility, XRD and DSC studies of Sm1-xGdxMn2Si2 silicides

International Nuclear Information System (INIS)

Kervan, S.; Kilic, A.; Gencer, A.

2004-01-01

X-ray powder diffraction, AC susceptibility and differential scanning calorimetry (DSC) studies were performed on the polycrystalline Sm 1-x Gd x Mn 2 Si 2 (0≤x≤1) compounds. All compounds investigated crystallize in the body-centered tetragonal ThCr 2 Si 2 -type structure with the space group I4/mmm. Substitution of Gd for Sm leads to a linear decrease of the lattice constants and the unit cell volume. The lattice constants and the unit cell volume obey Vegard's law. At low temperatures, the rare earth sublattice orders and reconfigures the ordering in the Mn sublattice. The samples with x=0.6 and 0.8 exhibit spin reorientation phenomenon. The Neel temperature T N (Mn) determined by DSC technique and the Curie temperature T C (RE) increase linearly with increasing Gd content x. The results are summarized in the x-T magnetic phase diagram

Luminescent properties of Sr{sub 2.5-3x/2}Ba{sub 0.5}Sm{sub x}AlO{sub 4}F oxyfluorides

Energy Technology Data Exchange (ETDEWEB)

Park, Sangmoon, E-mail: spark@silla.ac.kr [Department of Engineering in Energy and Applied Chemistry, Silla University, Busan 617-736 (Korea, Republic of)

2012-04-15

Effective orange Sm{sup 3+}-doped Sr{sub 2.5}Ba{sub 0.5}AlO{sub 4}F phosphors excited at 254 and 408 nm excitation were prepared by the solid-state method. The excitation and emission spectra of Sr{sub 2.5-3x/2}Ba{sub 0.5}Sm{sub x}AlO{sub 4}F and Sr{sub 2.5-3x/2}Ba{sub 0.5}Sm{sub x}AlO{sub 4-{alpha}}F{sub 1-{delta}} (x=0.001{approx}0.1) based on photoluminescence spectroscopy are investigated. The defects in anion-deficient Sr{sub 2.5-3x/2}Ba{sub 0.5}Sm{sub x}AlO{sub 4-{alpha}}F{sub 1-{delta}} (x=0.001, 0.01) are monitored by broad-band photoluminescence emission centered near 480 nm along with the orange emission transitions of Sm{sup 3+}. CIE values and relative luminescent intensities of Sr{sub 2.5-3x/2}Ba{sub 0.5}Sm{sub x}AlO{sub 4}F and Sr{sub 2.5-3x/2}Ba{sub 0.5}Sm{sub x}AlO{sub 4-{alpha}}F{sub 1-{delta}} by changing the Sm{sup 3+} content (x=0.001{approx}0.1) are discussed. - Highlights: Black-Right-Pointing-Pointer Under the excitation of 408 nm competent orange emitting Sr{sub 2.5-3x/2}Ba{sub 0.5}Sm{sub x}AlO{sub 4}F phosphor is initiated. Black-Right-Pointing-Pointer Sm{sup 3+}-activated oxyfluoride phosphor is quite effective to prepare white-emitting light for near-UV LED applications. Black-Right-Pointing-Pointer Defects could be visibly created in the Sr{sub 2.5-3x/2}Ba{sub 0.5}Sm{sub x}Al O{sub 4}F host lattices when Sm{sup 3+} ions are doped less than 5 mol %. Black-Right-Pointing-Pointer The gradual substitution of Sm{sup 3+} contents in oxyfluoride hosts is amenable to change CIE values and desired emitting intensity.

Reddish orange long afterglow phosphor Ca2SnO4:Sm3+prepared by sol-gel method

International Nuclear Information System (INIS)

Ju Zhenghua; Zhang Shuihe; Gao Xiuping; Tang Xiaoliang; Liu Weisheng

2011-01-01

Highlights: → A promising reddish orange emissive long afterglow phosphor Ca 2 SnO 4 :Sm 3+ prepared by sol-gel method was firstly reported. → The optics properties of Ca 2 SnO 4 :Sm 3+ were discussed. → Very useful tool, thermoluminscent technique was chosen to investigate the traps in the material. The results of thermoluminscent spectra indicating that the depth and number of traps are critical factors in determining their performance. → Furthermore, the phosphorescence mechanism was discussed successfully. → This work provides a potential approach to develop reddish orange light emitting long afterglow phosphor. - Abstract: A reddish orange light emissive long afterglow phosphor, Ca 2 SnO 4 :Sm 3+ was prepared by sol-gel method at lower temperature. The synthesized phosphors were characterized by X-ray diffraction, scanning electron micrograph images, photoluminescence spectra, afterglow decay curves and thermoluminescence spectra. Three emission peaks locate at 565 nm, 609 nm and 655 nm corresponding to CIE chromaticity coordinates of x = 0.53 and y = 0.47, which indicates the reddish orange light emitting. The fluorescent intensity and the afterglow characteristic depends on the concentration of Sm 3+ and the optimized concentration is 1.5 mol%. The afterglow decay curves are well fitted with triple-exponential decay models. The thermoluminescence glow curves show that the Sm 3+ induces suitable trap depth and result in the long afterglow phenomenon, and the corresponding increase or decrease in afterglow is associated with trap concentration, nearly no change in trap depth. The 1.5 mol% Sm 3+ -doped Ca 2 SnO 4 sample has the biggest trap concentration and exhibit the best afterglow characteristic, its' afterglow time is about 1 h. The phosphorescence mechanism of this long afterglow phosphor was discussed.

Synthesis and magnetic properties of SmOOH crystals

Energy Technology Data Exchange (ETDEWEB)

Samata, Hiroaki, E-mail: samata@maritime.kobe-u.ac.jp [Graduate School of Maritime Sciences, Kobe University, Fukaeminami, Higashinada, Kobe, Hyogo 658-0022 (Japan); Hanioka, Masashi [Graduate School of Maritime Sciences, Kobe University, Fukaeminami, Higashinada, Kobe, Hyogo 658-0022 (Japan); Ozawa, Tadashi C. [Materials Development Group, Superconducting Properties Unit, National Institute for Materials Science, Sengen, Tsukuba, Ibaraki 305-0047 (Japan)

2016-01-15

Samarium oxyhydroxide (SmOOH) crystals were synthesized using a flux method. The as-grown crystals were yellowish, transparent, and elongated with a maximum length of approximately 1.0 mm. SmOOH adopts a monoclinic structure in the space group P2{sub 1}/m with a=0.4356 nm, b=0.3766 nm, c=0.6139 nm, and β=108.464°. The magnetic susceptibility of the SmOOH crystals exhibited typical Van Vleck paramagnetism, and the experimental data at temperatures above 200 K were in close agreement with the calculated results using a spin-orbit coupling constant λ=443 K (308 cm{sup −1}). - Highlights: • SmOOH crystals were synthesized via flux method and characterized. • Magnetic susceptibilities above 200 K agreed with theoretical Van Vleck values. • Discrepancies were observed at lower temperatures based on the crystalline field.

Characterization on the coatings of Ni-base alloy with nano- and micron-size Sm{sub 2}O{sub 3} addition prepared by laser deposition

Energy Technology Data Exchange (ETDEWEB)

Zhang Shihong [School of Materials Science and Engineering, Anhui University of Technology, Maanshan City, Anhui Province 243002 (China); School of Nano and Advanced Materials Engineering, Changwon National University, 9, Sarim-Dong, Changwon, Gyeongnam 641-773 (Korea, Republic of)], E-mail: zsh10110903@hotmail.com; Li Mingxi [School of Materials Science and Engineering, Anhui University of Technology, Maanshan City, Anhui Province 243002 (China); Yoon, Jae Hong; Cho, Tong Yul [School of Nano and Advanced Materials Engineering, Changwon National University, 9, Sarim-Dong, Changwon, Gyeongnam 641-773 (Korea, Republic of)

2008-12-01

The coating materials are the powder mixture of micron-size Ni-base alloy powders with both 1.5 wt.% micron-size and nano-size Sm{sub 2}O{sub 3} powders, which are prepared on Q235 steel plate by 2.0 kW CO{sub 2} laser deposition. The results indicate that with rare earth oxide Sm{sub 2}O{sub 3} addition, the width of planar crystallization is smaller than that of the Ni-base alloy coatings. Micron- and nano-Sm{sub 2}O{sub 3}/Ni-base alloy coatings have similar microstructure showing the primary phase of {gamma}-Ni dendrite and eutectic containing {gamma}-Ni and Cr{sub 23}C{sub 6} phases. However, compared to micron-Sm{sub 2}O{sub 3}/Ni-base alloy, preferred orientation of {gamma}-Ni dendrite of nano-Sm{sub 2}O{sub 3}/Ni-base alloy is weakened. Planar crystal of several-{mu}m thickness is first grown and then dendrite growth is observed at 1.5% micron-Sm{sub 2}O{sub 3}/Ni-base alloy coating whereas equiaxed dendrite is grown at 1.5% nano-Sm{sub 2}O{sub 3}/Ni-base alloy coating. Hardness and wear resistance of the coating improves with decreasing Sm{sub 2}O{sub 3} size from micron to nano. The improvement on tribological property of nano-Sm{sub 2}O{sub 3}/Ni-base alloy over micron-Sm{sub 2}O{sub 3}/Ni-base alloy coatings can be attributed to the better resistance of equiaxed dendrite to adhesion interactions during the wear process. In 6 M HNO{sub 3} solution, the corrosion resistance is greatly improved with nano-Sm{sub 2}O{sub 3} addition since the decrease of corrosion ratio along grain-boundary in nano-Sm{sub 2}O{sub 3}/Ni-base alloy coating contributes to harmonization of corrosion potential.

Orange-red emitting Gd2Zr2O7:Sm3+: Structure-property correlation, optical properties and defect spectroscopy

Science.gov (United States)

Gupta, Santosh K.; Reghukumar, C.; Sudarshan, K.; Ghosh, P. S.; Pathak, Nimai; Kadam, R. M.

2018-05-01

Local structure analysis of dopant ion, understanding host to dopant energy transfer dynamics and defects characterization in a doped material which plays an important role in the designing a highly efficient opto-electronic material. In this connection a new Sm3+ doped Gd2Zr2O7 pyrochlore material was synthesized using gel-combustion technique and was characterized systematically using X-ray diffraction (XRD), time resolved photoluminescence spectroscopy (TRPLS), positron annihilation lifetime spectroscopy (PALS) and density functional theory (DFT) based ab-initio calculation. Based on DFT site selective energetics calculation and luminescence decay measurement, it was observed that the Sm3+ was distributed at both Gd3+ and Zr4+ site with higher Sm3+ fraction at the Gd3+ site. PALS was used to probe the presence of defects in the phosphor. In this work intense orange-red emission is realized through manipulating the energy transfer from host defect emission (oxygen vacancies) to Sm3+ which allows color emission from green in undoped to orange-red in doped samples. Effect of dopant concentration and annealing temperature was probed using TRPLS and PALS. These all information is highly important for researcher looking to achieve pyrochlore based phosphor materials with high quantum yield.

Sr_2SmNbO_6 perovskite: Synthesis, characterization and density functional theory calculations

International Nuclear Information System (INIS)

Dutta, Alo; Mukhopadhyay, P.K.; Sinha, T.P.; Shannigrahi, Santiranjan; Himanshu, A.K.; Sen, Pintu; Bandyopadhyay, S.K.

2016-01-01

The density functional theory (DFT) under the generalized gradient approximation (GGA) has been used to investigate the electronic structure of double perovskite oxide Sr_2SmNbO_6 synthesized by the solid-state reaction technique. The Rietveld refinement of the X-ray diffraction pattern of the sample shows the monoclinic P2_1/n phase at room temperature. The X-ray photoemission spectrum (XPS) of the material is collected in the energy window of 0–1200 eV. The chemical shift of the constituent elements calculated from the core level XPS spectra is used to analyze the covalency between the O anion and Sm/Nb cations. The valence band (VB) XPS spectrum is compared with the calculated VB spectrum using partial density of states in a standard way. The Raman spectrum is employed to investigate the phonon modes of the material in the monoclinic phase. Lorentzian lines are used to fit the experimental Raman spectrum, which present 24 phonon modes corresponding to the stretching and banding of NbO_6/SmO_6 octahedra and translational motion of Sr along the Sr−O bond. The discrepancy between the measured and calculated band gap values has been removed by applying modified Becke-Johnson (mBJ) potential in the DFT calculations. The experimental optical band gap obtained from the UV–visible reflectance spectrum is found to be 3.42 eV, which is well matched with the DFT calculated value of 3.2 eV, and suggests the semiconducting nature of the material. The real (ε′) and imaginary (ε″) parts of the optical dielectric constant as a function of energy along the x-, y- and z-polarization directions using mBJ potential are calculated. The collective vibrational modes of the atoms, the Born effective charge of the ions and their effect on the static dielectric constant of the material are studied using DFT. The calculated value of static dielectric constant for SSN is found to be 41.3. - Highlights: • Electronic structure and dynamical properties of Sr_2SmNbO_6 (SSN

Photoluminescence characteristics of reddish-orange Eu{sup 3+} or Sm{sup 3+} singly-doped and Eu{sup 3+} and Sm{sup 3+} co-doped KZnGd(PO{sub 4}){sub 2} phosphors

Energy Technology Data Exchange (ETDEWEB)

Jeong, Jun Ho; Bandi, Vengala Rao; Grandhe, Bhaskar Kumar; Jang, Ki Wan; Lee, Ho Sueb [Changwon National University, Changwon (Korea, Republic of); Yi, Soung Soo [Silla University, Busan (Korea, Republic of); Jeong, Jung Hyun [Pukyong National University, Busan (Korea, Republic of)

2011-02-15

Eu{sup 3+} or Sm{sup 3+} singly-doped and Eu{sup 3+} and Sm{sup 3+} co-doped KZnGd(PO{sub 4}){sub 2} phosphors were synthesized by using a conventional solid state reaction method at 750 .deg. C. The emission spectra of KZnGd{sub 1-x}(PO{sub 4}){sub 2}:Eu{sup 3+}{sub x} with {lambda}{sub ex} = 395 nm and KZnGd{sub 1-y}(PO{sub 4}){sub 2}:Sm{sup 3+}{sub y} with {lambda}{sub ex} = 403 nm phosphors showed intense {sup 5}D{sub 0} {yields} {sup 7}F{sub 1}, {sup 4}G{sub 5/2} {yields} {sup 6}H{sub 7/2} emission transitions at 595 nm and 599 nm, respectively. The optimum relative intensity of the KZnGd{sub 1-x-y}(PO{sub 4}){sub 2}:Eu{sup 3+}{sub x} , Sm{sup 3+}{sub y} phosphor was obtained for the doping concentrations of (x = 0.09, y = 0.01). In addition, the temperature dependent luminescence intensity of the synthesized phosphors was investigated and the thermal stability of the KZnGd(PO{sub 4}){sub 2}:Eu{sup 3+} phosphor was found to be higher than that of standard YAG:Ce{sup 3+} and KZnGd{sub 1-x-y}(PO{sub 4}){sub 2}:Eu{sup 3+}{sub x} Sm{sup 3+}{sub y} under near ultra-violet (NUV) light emitting diode excitation (LED). Therefore, we suggest that Eu{sup 3+} or Sm{sup 3+} singly-doped and Eu{sup 3+} and Sm{sup 3+} co-doped KZnGd(PO{sub 4}){sub 2} phosphors should be efficient for different red-color-emitting display device applications and NUV-LED-based white-light-emitting diodes.

Bi2(Sr, Ln)2CuOz (Ln = Nd, Sm) phases: stability, crystal growth and superconducting properties

International Nuclear Information System (INIS)

Faqir, H.; Kikuchi, M.; Syono, Y.; Mansori, M.; Satre, P.; Sebaoun, A.; Vacquier, G.

2000-01-01

Bi 2 (Sr,Ln) 2 CuO z (Ln = Nd, Sm) single crystals were successfully grown by a self-flux method from stoichiometric and (Bi, Cu)-rich melts. Thermal analysis and thermogravimetry were used to determine stability and the melting sequence of Bi 2 (Sr,Ln) 2 CuO z phases in air. As-grown crystals of the ideal Bi 2 (Sr,Ln) 2 CuO z phase, of dimensions 1x0.5x0.03 mm 3 , exhibit superconducting behaviour with critical temperature T c = 21 K for the Bi 1.9 Sr 1.6 Nd 0.6 CuO z crystal and Tc = 14 K for the Bi 1.8 Sr 1.6 Sm 0.6 CuO z crystal. The compositions of these crystals were homogeneous and close to the stoichiometric composition. We report on the growth of Bi 2 Sr 2-x Sm x CuO z single crystals of large dimensions 9x3x0.03 mm 3 using Bi 2 Sr 1.5 Sm 0.5 CuO z as precursor and Bi 2 CuO 4 as flux. (author)

Structural and magnetic properties of Fe{sub 2-x}CoSm{sub x}O{sub 4}-nanoparticles and Fe{sub 2-x}CoSm{sub x}O{sub 4}-PDMS magnetoelastomers as a function of Sm content

Energy Technology Data Exchange (ETDEWEB)

Ruiz, Mariano M.; Mietta, Jose L.; Soledad Antonel, P. [Instituto de Quimica Fisica de Materiales, Ambiente y Energia (INQUIMAE), Departamento de Quimica Inorganica, Analitica y Quimica Fisica, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Av. Cantilo s/n (1428), Buenos Aires (Argentina); Perez, Oscar E. [Departamento de Industrias, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Av. Cantilo s/n (1428), Buenos Aires (Argentina); Martin Negri, R. [Instituto de Quimica Fisica de Materiales, Ambiente y Energia (INQUIMAE), Departamento de Quimica Inorganica, Analitica y Quimica Fisica, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Av. Cantilo s/n (1428), Buenos Aires (Argentina); Jorge, Guillermo, E-mail: gjorge@df.uba.ar [Instituto de Fisica de Buenos Aires, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Av. Cantilo s/n (1428), Buenos Aires (Argentina); Instituto de Ciencias, Universidad Nacional de General Sarmiento, J.M. Gutierrez 1150 (1613), Los Polvorines, Buenos Aires (Argentina)

2013-02-15

We have synthesized magnetic Fe{sub 2-x}CoSm{sub x}O{sub 4} nanoparticles (NPs) by means of the coprecipitation method, varying Sm content from x=0 to x=0.5. Energy-dispersive X-ray spectroscopy showed agreement between the metal proportion of the obtained nanoparticles and the stoichiometric mixture of cations used for the synthesis. Part of the particles were heated at 800 Degree-Sign C, and both were characterized by X-ray diffraction, scanning electron microscope imaging and magnetization measurements. Physical and magnetic properties were analyzed as a function of Sm content, before and after the heating treatment. A phase segregation is found for the calcined nanoparticles with large Sm content. The magnetic remanence, saturation and coercive field were investigated as a function of Sm content for both heated and unheated (as-prepared) particles. Polydimethylsiloxane-NPs magnetoelastomers were prepared and cured under an external uniform magnetic field, obtaining structured anisotropic composites, in which inorganic needles (columnar micrometric structures) oriented in the direction of the magnetic field are formed. Young modulus and remanent magnetic moment were measured and magnetization time relaxation experiments were performed in the directions parallel and perpendicular to the needles in order to determine the magnetic and elastic anisotropy of the composites. The elastic modulus measured parallel to the needles resulted almost twice in magnitude with respect to the perpendicular modulus. The measured magnetic anisotropy of the composites is probably due to the enhanced interparticle interaction within a needle and the freezing of an preferred easy axis distribution among the particles at the curing process. - Highlights: Black-Right-Pointing-Pointer We study magnetic and physical properties of Sm-substituted Fe{sub 2}CoO{sub 4} nanoparticles. Black-Right-Pointing-Pointer Magnetic nanoparticles were synthesized by the coprecipitation method. Black

β-decay spectroscopy of neutron-rich 160,161,162Sm isotopes

Directory of Open Access Journals (Sweden)

Patel Z.

2016-01-01

Full Text Available Neutron-rich 160,161,162Sm isotopes have been populated at the RIBF, RIKEN via β first time. β-coincident γ rays were observed in all three isotopes including γ rays from the isomeric decay of 160Sm and 162Sm. The isomers in 160Sm and 162Sm have previously been observed but have been populated via β decay for the first time. The isomeric state in 162Sm is assigned a 4−v72+[ 633 ]⊗v12−[ 521 ]${4^ - }v{{7 \\over 2}^ + }\\left[ {633} \\right] \\otimes v{{1 \\over 2}^ - }\\left[ {521} \\right]$ configuration based on the decay pattern. The level schemes of 160Sm and 162Sm are presented. The ground states in the parent nuclei 160Pm and 162Pm are both assigned a 6−v72+[633]⊗π52−[532]${6^ - }v{{7 \\over 2}^ + }\\left[ {633} \\right] \\otimes \\pi {{5 \\over 2}^ - }\\left[ {532} \\right]$ configuration based on the population of states in the daughter nuclei. Blocked BCS calculations were performed to further investigate the spin-parities of the ground states in 160Pm, 161Pm, and 162Pm, and the isomeric state in 162Sm

Structural and spectral properties of MgZnO2:Sm3+ phosphor

Science.gov (United States)

Rajput, Preasha; Sharma, Pallavi; Biswas, Pankaj; Kamni

2018-05-01

The samarium doped MgZnO2 phosphor was synthesized by the low-cost combustion method. The powder X-ray diffraction (XRD) analysis confirmed the crystallinity and phase purity of the phosphor. The lattice parameters were determined by indexing the diffraction peaks. The photoluminescence (PL) study revealed that the phosphor exhibited a broad excitation band in the UV region ranging between 200 to 350 nm. The 601 nm emission was ascribed to 4G5/2 to 6H7/2 transitions of the Sm3+ ion. The optical bandgap of MgZnO2:Sm3+ was obtained to be 3.56 eV. The phosphor can be projected as a useful material in X- and gamma-ray scintillators.

Microstructural changes during the slow-cooling annealing of nanocrystalline SmCo 2:17 type magnets

International Nuclear Information System (INIS)

Romero, S.A.; Campos, M.F. de; Castro, J.A. de; Moreira, A.J.; Landgraf, F.J.G.

2013-01-01

Highlights: ► Use of the Stoner-Wohlfarth Callen Liu Cullen model in 2:17 type magnets. ► Data suggest exchange coupling between Sm2(CoFe)17 and Sm(CoCu)5 phases. ► It is given structural data for phase Sm0.33Zr0.67TM3, with TM=Co,Fe,Cu. ► The beneficial effect of the slow cooling treatment is explained. - Abstract: The microstructure and magnetic properties of 2:17 type isotropic magnets were investigated. The slow cooling heat treatment (cooling at 1 °C/min from 820 to 400 °C, and isothermal treatment during 24 h) was interrupted after the temperatures of 820, 700, 600 and 500 °C and their hysteresis were measured with fields up to 9 T. The fully heat treated sample presented coercivity (μ 0 H) of 3.32 T, after 24 h at 400 °C. The microstructure was investigated with SEM–FEG (Scanning Electron Microscope with Field Emission Gun) and X-ray Diffraction Rietveld analysis. The application of the Stoner–Wohlfarth–Callen–Liu–Cullen (SW–CLC) model points out exchange coupling between ferromagnetic Sm 2 (CoFe) 17 nanocells and ferromagnetic Sm(CoCu) 5 present at the cell boundary phase. The results are interpreted with the double shell model: first-a cobalt-rich ferromagnetic Sm(CoCu) 5 shell originates exchange coupling and second-a copper-rich paramagnetic Sm(CuCo) 5 shell produces magnetic decoupling. This double shell helps to maximize coercivity and remanence. The anisotropy field of the Sm 2 (CoFe) 17 cell phase was estimated in 7 T with the SW–CLC model.

SmBa2NbO6 Nanopowders, an Effective Percolation Network Medium for YBCO Superconductors

Directory of Open Access Journals (Sweden)

S. Vidya

2013-01-01

Full Text Available The percolation behavior of superconductor-insulator composite, YBa2Cu3O7–δ, and nano SmBa2NbO2 synthesized by modified combustion technique was studied. Particle size of nano SmBa2NBO6 was determined using transmission electron microscopy. The chemical nonreactivity of nano SmBa2NbO6 with YBCO is evident from the X-Ray diffraction study which makes it a suitable nanoceramic substrate material for high temperature superconducting films. A systematic increase in the sintered density, approaching the optimum value of the insulating nanophase is clearly observed, as the vol.% of YBCO in the composite decreases. SEM micrograph showed uniform distribution of nanopowder among the large clusters of YBCO. The obtained percolation threshold is ~26 vol% of YBCO in the composite. All the composites below the threshold value showed TC(0~92 K even though the room resistivity increases with increase in vol.% of nano SmBa2NbO6. The values of critical exponents obtained matches well with the theoretically expected ones for an ideal superconductor-insulator system.

Permanent magnets prepared from Sm10.5Fe88.5Zr1.0Ny without homogenization

International Nuclear Information System (INIS)

Gebel, B.; Kubis, M.; Mueller, K.-H.

1997-01-01

In as-cast Sm 2 Fe 17 the high amount of α-Fe caused by a peritectic reaction can be considerably reduced by a small addition of about 1 at% Zr. X-ray diffraction showed that as-cast Sm 10.5 Fe 88.5 Zr 1.0 mainly consists of a phase with the Th 2 Zn 17 -type structure and SmFe 3 . Non-homogenized Sm 10.5 Fe 88.5 Zr 1.0 was milled and (i) annealed in vacuum or (ii) treated with a hydrogenation-disproportionation-desorp tion-recombination (HDDR) process. The annealed and subsequently nitrogenated powder is magnetically anisotropic and has a coercivity μ 0J H C up to 2.0 T and an energy product (BH) max up to 136 kJ/m 3 . HDDR-treated and nitrogenated powder is isotropic and exhibits values of μ 0J H C = 3.1 T and (BH) max 103 kJ/m 3 . Consequently, Sm 10.5 Fe 88.5 Zr 1.0 N y (y ∼ 16) permanent magnets with very good properties can be prepared without the time-consuming homogenization procedure. (orig.)

Crystal structure and magnetic properties of a nitrogenated melt-spun Sm[sub 2]Fe[sub 17] compound

Energy Technology Data Exchange (ETDEWEB)

Yang, Choong-Jin [Electromagnetic Materials Laboratory, Research Institute of Industrial Science and Technology, P.O. Box 135, 790-330 Pohang (Korea, Republic of); Lee, Woo-Young [Electromagnetic Materials Laboratory, Research Institute of Industrial Science and Technology, P.O. Box 135, 790-330 Pohang (Korea, Republic of); Choi, Seung-Duck [Electromagnetic Materials Laboratory, Research Institute of Industrial Science and Technology, P.O. Box 135, 790-330 Pohang (Korea, Republic of)

1994-05-15

Sm[sub 2]Fe[sub 17]N[sub 2.9] compound powders were prepared from parent alloys of Sm[sub 2]Fe[sub 17] which were made by both arc melting and rapid solidification processes. The cast Sm[sub 2]Fe[sub 17] contained mixed phases of SmFe[sub 3] and [alpha]-Fe, and correspondingly formed less Sm[sub 2]Fe[sub 17]N[sub x] with a rather large amount of residual [alpha]-Fe after nitrogenation. The melt-spun Sm[sub 2]Fe[sub 17] compound, however, was single phase and exhibited a negligible amount of residual [alpha]+Fe after nitrogenation. The residual amount of free iron was found to increase as a function of milling time and to impede the development of promising permanent magnetic properties. The melt-spun Sm[sub 2]Fe[sub 17]N[sub x] compound powders exhibited a coercivity value [sub i]H[sub c] of 5 kOe, which is double that of the as-cast Sm[sub 2]Fe[sub 17]N[sub x] powders and a high remanence B[sub r]=60 e.m.u. g[sup -1]. The average magnetic moment of Fe atoms in the crystal is estimated to be 2.29 [mu][sub B] and the Fe atom in the 6c site exhibits the highest magnetic moment of 2.65 [mu][sub B]. The expansion in the c axial direction of the nitrogenated crystal was found to be mainly due to extension of Sm(6c)-Fe(c) and Fe(18f)-Fe(18f) distances. ((orig.))

Angle-resolved photoemission investigation of SmB{sub 6}

Energy Technology Data Exchange (ETDEWEB)

Hlawenka, Peter; Rader, Oliver; Siemensmeyer, Konrad; Weschke, Eugen; Varykhalov, Andrei; Rienks, Emile [Helmholtz-Zentrum Berlin (Germany); Shitsevalova, Natalya [Institute for Problems of Material Science, Kiev (Ukraine); Gabani, Slavomir; Flachbart, Karol [IEP, Slovak Academy of Science, Kosice (Slovakia)

2015-07-01

Recently the mixed valence compound SmB{sub 6} has drawn great attention. Theoretically predicted surface states, which should result from a hybridisation of localised f-bands with conduction electrons and a band inversion, would make SmB{sub 6} the first realisation of a so called topological Kondo insulator. Conductivity and transport measurements, as well as spin-resolved photoemission spectroscopy seem to fortify the scenario of a topological nature of the conductive surface. We investigate the surface electronic structure of SmB{sub 6} by means of high resolution angle-resolved photoemission spectroscopy measurements below 1 K. We will present new insights into the surface states that determine the low temperature conductivity of this material.

Hydrogenation-disproportionation-desorption-recombination in Sm{sub 2}Fe{sub 16}M (M=Al, Ga and Si) and magnetic properties of their carburized powders

Energy Technology Data Exchange (ETDEWEB)

Kubis, M.; Rave, W.; Cao, L.; Gebel, B.; Mueller, K.-H.; Schultz, L. [Institut fuer Festkoerper- und Werkstofforschung Dresden e.V. (Germany)

1998-11-20

The application of the hydrogenation-disproportionation-desorption-recombination (HDDR) process in Sm{sub 2}Fe{sub 16}M (M=Al,Ga and Si) was investigated. The hydrogen absorption behaviour was studied by temperature-pressure analysis (TPA). In the temperature range between 500 and 800 C, Sm{sub 2}Fe{sub 16}M samples with M=Ga and Si show a weaker hydrogen absorption than Sm{sub 2}Fe{sub 16}Al. This was confirmed by X-ray diffraction which showed a complete disproportionation of Sm{sub 2}Fe{sub 16}Al into SmH{sub z} (1.92.8) and {alpha}-(Fe,Al), while Sm{sub 2}Fe{sub 16}Ga and Sm{sub 2}Fe{sub 16}Si exhibit a fraction of undecomposed material with the Th{sub 2}Zn{sub 17}-type structure after the disproportionation procedure. These results point to a stabilization of Sm{sub 2}Fe{sub 16}M against disproportionation by hydrogen for M=Ga and Si. The magnetization processes of carburized HDDR powders were studied by VSM measurements and Kerr microscopy. The demagnetization curve of our HDDR processed Sm{sub 2}Fe{sub 16}AlC{sub y} is well shaped, whereas those of Sm{sub 2}Fe{sub 16}GaC{sub y} and Sm{sub 2}Fe{sub 16}SiC{sub y} show a large decrease of the polarization at low fields. The favourable behaviour of Sm{sub 2}Fe{sub 16}AlC{sub y} is due to a homogeneous submicron grain structure. In Sm{sub 2}Fe{sub 16}GaC{sub y} and Sm{sub 2}Fe{sub 16}SiC{sub y} samples, an additional, magnetically soft phase with larger domains was observed which causes the low coercivity. As a consequence, HDDR was only favourable for the preparation of Sm{sub 2}Fe{sub 16}MC{sub y} hard magnets with M=Al but not for M=Ga and Si. Optimization of the HDDR process in Sm{sub 2}Fe{sub 16}Al and subsequent nitrogenation or carburization led to coercivities of {mu}{sub 0j}H{sub c}=2.9 and 2.5 T, respectively. (orig.) 11 refs.

High coercivity Sm-Co thin films from elemental Sm/Co multilayer deposition and their microstructural aspects

Energy Technology Data Exchange (ETDEWEB)

Krishnan, M. [Surface Engineering Division, CSIR-National Aerospace Laboratories, Bangalore 560 017 (India); Department of Physics, National Institute of Technology Calicut, Calicut 673601 (India); Predeep, P. [Department of Physics, National Institute of Technology Calicut, Calicut 673601 (India); Sridhara Rao, D.V. [Defence Metallurgical Research Laboratories, Hyderabad 500058 (India); Prajapat, C.L.; Singh, M.R. [Technical Physics Division, Bhabha Atomic Research Centre, Mumbai 400085 (India); Barshilia, Harish C. [Surface Engineering Division, CSIR-National Aerospace Laboratories, Bangalore 560 017 (India); Chowdhury, P., E-mail: pchowdhury@nal.res.in [Surface Engineering Division, CSIR-National Aerospace Laboratories, Bangalore 560 017 (India)

2017-05-15

Hard magnetic thin films with high coercivity were fabricated by magnetron sputtering on MgO(100) and quartz substrates. The films were grown by depositing sequentially Sm and Co layers at an elevated substrate temperature of 500 °C. Subsequent post-annealing was carried out at various temperatures in range of 500–700 °C to form Sm-Co hard magnetic thin films. X-ray diffraction studies revealed the formation of randomly oriented SmCo{sub 5} crystallites on quartz substrate, whereas, a textured growth of Sm{sub 2}Co{sub 7} with strong (110) crystalline phases was observed on MgO substrate. Microstructural analyses were carried out using Transmission Electron Microscopy (TEM) for samples grown on MgO substrate at 650 °C and inferred the presence of high density planar defects along with large grain boundaries. Further microdiffraction studies confirmed the presence of SmCo{sub 3} as an impurity phase in the films. Magnetic hysteresis measurements indicate the square hysteresis behaviors with high coercivity value of 3.1 T and 2.7 T for 650 °C annealed samples on both MgO and quartz substrates, respectively. The origin of such high coercivity value was then correlated with pinning type of spin reversal mechanism as confirmed through the analyses of demagnetization curves. The magnetic force microscopy images for films on MgO substrate, annealed at 650 °C, revealed the presence of magnetic domains with size higher than 1 µm. The formed magnetic domains lacked well defined boundaries indicating an enhanced exchange coupling between the grain clusters. - Highlights: • Ewald technique in micromagnetic simulations with periodic boundary conditions. • Effect of micromagnetic parameters on hysteresis in exchange spring magnets. • Importance of the interface exchange coupling for hard-soft nanocomposites. • Geometry dependence of the optimal soft phase size in exchange spring magnets.

Standard enthalpy of formation of Sm6UO12 acid dissolution calorimetry

International Nuclear Information System (INIS)

Venkata Krishnan, R.; Jogeswararao, G.; Ananthasivan, K.

2016-01-01

The standard molar enthalpies of formation of Δ f (298 K) of Sm 6 UO 12 have been determined by using an indigenously developed isoperibol acid solution calorimeter. The water equivalent of this calorimeter was determined by electrical calibration. The accuracy of measurement were determined by using standard materials KCl and tris(hydroxyl methyl) amino-methane (TRIS) and was found to be within ±2%. The enthalpies of solution at 298 K of Sm 2 O 3 , UO 3 and Sm 6 UO 12 were measured by using this calorimeter. From these experimental results the enthalpies of formation of Sm 6 UO 12 at 298 K were computed by using Hess's law of summation. (author)

Acute toxicity of injection of 153Sm-EDTMP

International Nuclear Information System (INIS)

Chen Baiwei; Chai Xuehong

2004-01-01

Sm-153 has several distinct advantages as a radiopharmaceutical for the treat of patients with bone to skeletal metastasis. Sm-153 shows high skeletal uptake and rapid blood and nonosseous tissue clearance. Several paper have considered the toxicity of 153Sm-EDTMP. We report the acute toxicity in mice and rats after injection of 153Sm-EDTMP or unlabeled EDTMP. The EDTMP was injected to mice by 9.76, 7.8, 6.25, 5, 4 mg/Kg. The logarithmic dose of EDTMP were given to mice to determine LD50. The LD50 of EDTMP in mice is 7.1 mg/Kg. The decay of 153Sm-EDTMP for 4 months were injected to mice at dose of 225 mg/Kg. 153Sm-EDTMP were given at 4 difference dosage to rats by 74 MBq/Kg, 370 MBq/Kg, 1110 MBq/Kg, 1850 MBq/Kg. The LD50 of 153Sm-EDTMP in rats is more than 370 MBq/Kg. Although the cold EDTMP LD50 was low, chelated with Sm can decrease it's toxicity. The decay 153Sm-EDTMP can be safe at dose of 225 mg/Kg. The clinical dose will be used at 37 MBq/Kg. So there is no need to consider to acute toxicity in clinical used 153Sm-EDTMP in designated regimen because the safe range is wide enough to cover clinical used. (authors)

The microwave magnetic performance of Sm3+ doped BaCo2Fe16O27

International Nuclear Information System (INIS)

Wang Lixi; Song Jie; Zhang Qitu; Huang Xiaogu; Xu Naicen

2009-01-01

W-type barium hexaferrites doped with Sm 3+ , Ba 1-x Sm x Co 2 Fe 16 O 27 (x = 0.0, 0.05, 0.1, 0.15, 0.2) were prepared by the conventional solid-state reaction. The structure and electromagnetic properties of the calcined samples were studied using powder X-ray diffraction (XRD) and network analyzer (Agilent 8722ET). All the XRD patterns showed the single phase of the magnetoplumbite barium ferrite without other intermediate phase when x ≤ 0.15. The microwave electromagnetic properties of the samples have been studied at the frequency range from 2 GHz to 18 GHz. It was shown that ε' and ε'' increased slightly, and the maximum of ε'' shifted to low frequency position with Sm 3+ ions doping. The μ'' and μ' values were improved significantly when x = 0.15, and the peak value of μ'' was about 1.6 at 7 GHz and 1.75 at 18 GHz position, respectively, exhibiting excellent microwave magnetic performance. Furthermore, the reasons have also been discussed using electromagnetic theory. Ba 0.85 Sm 0.15 Co 2 Fe 16 O 27 powders (85% by weight) were mixed with epoxy resin to form compound coating materials with different thicknesses, the reflection loss values of which were also measured. It is shown that the reflection loss value increases with the increase of the coating thickness under our experimental range. The maximum of reflection loss reached about -23 dB and it was below -10 dB at the frequency range from 8 GHz to 18 GHz, when the thickness was 1.8 mm.

A study of the Fe-based superconductor SmFeAsO{sub 1-x}F{sub x} by x-ray photoelectron spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Zhang, Y; Chen, Y L; Cui, Y J; Cheng, C H; Zhao, Y [Key Laboratory of Magnetic Levitation Technologies and Maglev Trains (Ministry of Education of China), Superconductivity R and D Center (SRDC), Mail Stop 165, Southwest Jiaotong University, Chengdu, Sichuan 610031 (China); Zhang, H [Department of Physics, Peking University, Beijing 100871 (China)], E-mail: yzhao@swjtu.edu.cn

2009-01-15

The electronic structure of the Fe-based superconductor SmFeAsO{sub 1-x}F{sub x} (x = 0 and 0.2) is studied with x-ray photoemission spectroscopy (XPS) through comparing the band structures of the nonsuperconducting parent material SmFeAsO and the superconducting SmFeAsO{sub 0.8}F{sub 0.2} (T{sub c} = 52.5 K). A small peak centered at 0.2 eV below the Fermi level, E{sub F}, in the valence band is observed in the parent material SmFeAsO, which is due to the low-spin state of the Fe 3d electrons. With fluorine doping, the peak at 0.2 eV disappears and a broad plateau forms near the Fermi level; in the meantime, the density of states at E{sub F} is slightly suppressed. The O 1s and Sm 3d core levels shift towards high energy by {approx}0.55 eV with fluorine doping, but in a sharp comparison, the Fe 2p and As 3d core levels do not shift significantly (the binding energy shift is less than 0.01 eV). It is deduced from the core-level shifts that the Fermi level of the system moves up by 0.55 eV by fluorine doping.

Thermoanalytical investigation of the hydrogen absorption behaviour of Sm{sub 2}Fe{sub 17-x}Ga{sub x} at high hydrogen pressures

Energy Technology Data Exchange (ETDEWEB)

Handstein, A.; Kubis, M.; Gebel, B.; Mueller, K.-H.; Schultz, L. [Institut fuer Festkoerper- und Werkstofforschung Dresden e.V. (Germany). Inst. fuer Metallische Werkstoffe; Gutfleisch, O.; Harris, I.R. [Institut fuer Festkoerper- und Werkstofforschung Dresden e.V. (Germany). Inst. fuer Metallische Werkstoffe]|[Birmingham Univ. (United Kingdom). School of Metallurgy and Materials

1998-07-01

The complete disproportionation of Sm{sub 2}Fe{sub 17-x}Ga{sub x} during annealing in hydrogen is hindered due to an increased stability of the compounds with a higher Ga content (x {>=} 1). Therefore the HD process as the first step of HDDR (hydrogenation-disproportionation-desorption-recombination) has to be carried out at a high hydrogen pressure for x {>=} 1. The hydrogen absorption behaviour of Sm{sub 2}Fe{sub 17-x}Ga{sub x} (x = 0, 0.5, 1 and 2) was investigated by means of hydrogen differential thermal analysis (HDTA) and high pressure differential scanning calorimetry (HPDSC) at hydrogen pressures up to 70 bar. A dependency of hydrogenation and disproportionation temperatures on hydrogen pressure and Ga content was found. The comparison with other substituents (M = Al and Si) instead of M = Ga showed an increased stability of Sm{sub 2}Fe{sub 17-x}M{sub x} compounds against disproportionation by hydrogen in the sequence Al, Ga and Si. The Curie temperatures of the interstitially hydrogenated Th{sub 2}Zn{sub 17}-type materials increase with the hydrogen pressure. In order to produce coercive and thermally stable Sm{sub 2}Fe{sub 15}Ga{sub 2}C{sub y} powder by means of the HDDR process, we recombined material disproportionated at different hydrogen pressures. Preliminary results of magnetic properties of this HDDR treated and gas-carburized Sm{sub 2}Fe{sub 15}Ga{sub 2}C{sub y} are discussed. (orig.)

checkCIF/PLATON report Datablock: Sm

Indian Academy of Sciences (India)

Moiety formula C59 H45 N2 O6 Sm. Sm (C14 H12 N2) ... 4.0 Ratio. PLAT234_ALERT_4_C Large Hirshfeld Difference O4 -- C24 .. 0.16 Ang. ... outliers and unusual parameters, but every test has its limitations and alerts that are not important.

Superconductivity at 43K in SmFeAsO1-xFx

Science.gov (United States)

Chen, X. H.; Wu, T.; Wu, G.; Liu, R. H.; Chen, H.; Fang, D. F.

2008-06-01

Since the discovery of high-transition-temperature (high-Tc) superconductivity in layered copper oxides, extensive effort has been devoted to exploring the origins of this phenomenon. A Tc higher than 40K (about the theoretical maximum predicted from Bardeen-Cooper-Schrieffer theory), however, has been obtained only in the copper oxide superconductors. The highest reported value for non-copper-oxide bulk superconductivity is Tc = 39K in MgB2 (ref. 2). The layered rare-earth metal oxypnictides LnOFeAs (where Ln is La-Nd, Sm and Gd) are now attracting attention following the discovery of superconductivity at 26K in the iron-based LaO1-xFxFeAs (ref. 3). Here we report the discovery of bulk superconductivity in the related compound SmFeAsO1-xFx, which has a ZrCuSiAs-type structure. Resistivity and magnetization measurements reveal a transition temperature as high as 43K. This provides a new material base for studying the origin of high-temperature superconductivity.

Correlation between the nanocrystalline Sm(Fe,Mo){sub 12} and its out of equilibrium phase Sm(Fe,Mo){sub 10}

Energy Technology Data Exchange (ETDEWEB)

Khazzan, S. [CMTR, ICMPE, UMR7182, CNRS - Université Paris Est, 2-8 rue Henri Dunant, F-94320 Thiais (France); Laboratoire Matériaux Organisation et Propriétés, Faculté des Sciences de Tunis, Université de Tunis El Manar, 2092 Tunis (Tunisia); Bessais, L., E-mail: bessais@glvt.cnrs.fr [CMTR, ICMPE, UMR7182, CNRS - Université Paris Est, 2-8 rue Henri Dunant, F-94320 Thiais (France); Van Tendeloo, G. [EMAT, University of Antwerp, B-2020 Antwerp (Belgium); Mliki, N. [Laboratoire Matériaux Organisation et Propriétés, Faculté des Sciences de Tunis, Université de Tunis El Manar, 2092 Tunis (Tunisia)

2014-08-01

Nanostructured Sm–Fe–Mo semi-hard magnetic material exhibiting enhanced magnetic properties can be produced by ball milling followed by recrystallization. Milled samples were annealed for 30 min in a vacuum at different temperatures (T{sub A}) between 700 and 1190 °C. The effects of heat treatment and Mo content on structural and magnetic property changes have been investigated by means of X-ray diffraction using the Rietveld method, transmission electron microscopy and magnetic measurements. For samples annealed at T{sub A}>900°C the tetragonal ThMn{sub 12}-type structure is identified, while for 7001:10, for the out of equilibrium hexagonal phase, which is described with three crystallographic transition metal sites: 3g is fully occupied, 6l occupation is limited to hexagons surrounding the Fe dumbbell pairs 2e. We have performed a magnetic and structural study of nanocrystalline metastable P6/mmm Sm(Fe{sub 1−x}Mo{sub x}){sub 10}, correlated with structural transformation towards its equilibrium derivative I4/mmm Sm(Fe{sub 1−x}Mo{sub x}){sub 12}. A maximum of the coercive field H{sub C} (H{sub C}>5kOe) has been observed for the new hexagonal P6/mmm phase suggesting that nanocrystalline Sm(Fe,Mo){sub 10}, is a semi-hard material, and is potential candidate for magnetic recording. - Highlights: • A study of the structure and magnetic properties of SmFeMo compound. • A new out of equilibrium P6/mmm-type structure was found. • Correlation between the 1/12 phase and its out of equilibrium 1/10 phase.

Sm 3+-doped polymer optical waveguide amplifiers

Science.gov (United States)

Huang, Lihui; Tsang, Kwokchu; Pun, Edwin Yue-Bun; Xu, Shiqing

2010-04-01

Trivalent samarium ion (Sm 3+) doped SU8 polymer materials were synthesized and characterized. Intense red emission at 645 nm was observed under UV laser light excitation. Spectroscopic investigations show that the doped materials are suitable for realizing planar optical waveguide amplifiers. About 100 μm wide multimode Sm 3+-doped SU8 channel waveguides were fabricated using a simple UV exposure process. At 250 mW, 351 nm UV pump power, a signal enhancement of ˜7.4 dB at 645 nm was obtained for a 15 mm long channel waveguide.

X-ray induced Sm{sup 3+} to Sm{sup 2+} conversion in fluorophosphate and fluoroaluminate glasses for the monitoring of high-doses in microbeam radiation therapy

Energy Technology Data Exchange (ETDEWEB)

Vahedi, Shahrzad; Okada, Go; Morrell, Brian; Muzar, Edward; Koughia, Cyril; Kasap, Safa [Department of Electrical and Computer Engineering, University of Saskatchewan, Saskatoon, Saskatchewan S7N 5A9 (Canada); Edgar, Andy; Varoy, Chris [School of Chemical and Physical Sciences and MacDiarmid Institute, Victoria University of Wellington, Kelburn Parade (New Zealand); Belev, George; Wysokinski, Tomasz [Canadian Light Source, Inc., University of Saskatchewan, Saskatoon, Saskatchewan S7N 0X4 (Canada); Chapman, Dean [Department of Anatomy and Cell Biology, University of Saskatchewan, Saskatoon, Saskatchewan S7N 5E5 (Canada)

2012-10-01

Fluorophosphate and fluoroaluminate glasses doped with trivalent samarium were evaluated as sensors of x-ray radiation for microbeam radiation therapy at the Canadian Light Source using the conversion of trivalent Sm{sup 3+} to the divalent form Sm{sup 2+}. Both types of glasses show similar conversion rates and may be used as a linear sensor up to {approx}150 Gy and as a nonlinear sensor up to {approx}2400 Gy, where saturation is reached. Experiments with a multi-slit collimator show high spatial resolution of the conversion pattern; the pattern was acquired by a confocal fluorescence microscopy technique. The effects of previous x-ray exposure may be erased by annealing at temperatures exceeding the glass transition temperature T{sub g} while annealing at T{sub A} < T{sub g} enhances the Sm conversion. This enhancement is explained by a thermally stimulated relaxation of host glass ionic matrix surrounding x-ray induced Sm{sup 2+} ions. In addition, some of the Sm{sup 3+}-doped glasses were codoped with Eu{sup 2+}-ions but the results show that there is no marked improvement in the conversion efficiency by the introduction of Eu{sup 2+}.

Absorption Spectra of BaF2 Sm2O3, Sm, Gd, and Ho Plasmas

Science.gov (United States)

Martin, Michael; Bastiani-Ceccotti, Serena

2009-11-01

Knowledge of the opacities of high Z element plasmas is important in indirect drive ICF and the study of stellar evolution. There are few experimental measurements of this quantity, and its theoretical determination is difficult due to the number of possible bound electron configurations. This study aims to better the theoretical understanding of this parameter by looking at the 3d-4f transitions of BaF2, Sm2O3, Sm, Gd, and Ho plasmas at the LULI2000 facility. The plasmas are produced by radiative heating and are cold, 15 -- 40 eV, and relatively dense, ˜ .01gm/cm^3 A plasma is produced by a .5 ns laser pulse irradiating a gold hohlraum and then probed by an x-ray source created by a gold foil irradiated by a 10 ps laser pulse. The transmission is found with simultaneous source and absorption measurements by an x-ray spectrometer in the 8 - 20 å range We will compare the results with statistical atomic structure codes. From this experiment we will gain further insight into the spectral broadening of neighboring Z elements due to changing plasma temperature and into mixture thermodynamics. This is a first step towards an experimental study of astrophysical domains.

High spin states in 143Sm

International Nuclear Information System (INIS)

Raut, R.; Ganguly, S.; Kshetri, R.; Banerjee, P.; Bhattacharya, S.; Dasmahapatra, B.; Mukherjee, A.; Mukherjee, G.; Sarkar, M. Saha; Goswami, A.; Gangopadhyay, G.; Mukhopadhyay, S.; Krishichayan,; Chakraborty, A.; Ghughre, S. S.; Bhattacharjee, T.; Basu, S. K.

2006-01-01

The high spin states of 143 Sm have been studied by in-beam γ-spectroscopy following the reaction 130 Te( 20 Ne,7n) 143 Sm at E lab =137 MeV, using a Clover detector array. More than 50 new gamma transitions have been placed above the previously known J π =23/2 - , 30 ms isomer at 2795 keV. The level scheme of 143 Sm has been extended up to 12 MeV and spin-parity assignments have been made to most of the newly proposed level. Theoretical calculation with the relativistic mean field approach using blocked BCS method, has been performed. A sequence of levels connected by M1 transitions have been observed at an excitation energy ∼8.6 MeV. The sequence appears to be a magnetic rotational band from systematics

Magnetic properties of Sm-based filled skutterudite phosphides

Energy Technology Data Exchange (ETDEWEB)

Giri, R.; Sekine, C.; Shimaya, Y.; Shirotani, I.; Matsuhira, K.; Doi, Y.; Hinatsu, Y.; Yokoyama, M.; Amitsuka, H

2003-05-01

Filled skutterudites SmFe{sub 4}P{sub 12} and SmOs{sub 4}P{sub 12} have been prepared at high temperature and high pressure. The temperature dependence of electrical resistivity in both compounds shows metallic behavior. The magnetic susceptibility and specific heat measurements indicate that SmFe{sub 4}P{sub 12} shows a ferromagnetic ordering at 1.5 K, whereas SmOs{sub 4}P{sub 12} is an antiferromagnet with a T{sub N} of 4.6 K.

Determination of the {sup 151}Sm half-life

Energy Technology Data Exchange (ETDEWEB)

Be, Marie-Martine; Cassette, Philippe [CEA, LIST, Gif sur Yvette (France). LNE-Laboratoire National Henri Becquerel; Isnard, Helene [CEA-LANIE, Gif sur Yvette (France); and others

2015-07-01

New measurements have been undertaken to determine the half-life of {sup 151}Sm. A pure {sup 151}Sm solution was obtained after chemical separation from a samarium solution resulting from the dissolution of an irradiated samarium sample. The concentration of {sup 151}Sm in the solution was measured by mass spectrometry, combined with the isotope dilution technique. The activity of the solution was measured by liquid scintillation counting by six European laboratories as part of an international comparison. These combined results lead to a half-life of T{sub 1/2} = 94.6(6)a.

SM-1420 computer conjugation with the ES-5017 magnetic tape storage device and the SM-6313 printer

International Nuclear Information System (INIS)

Zhurkin, V.V.; Safonov, A.A.; Troitskij, A.N.

1987-01-01

The flow sheets are given and the methods of the technical implementation of expansion units of SM 5002.4 controllers to connect NML ES-5017 and analogue-digital printer ATsPU SM-6818, respectively, to SM-1420 computer are described

Enhanced Photoluminescence of Sm3+/Bi3+ Co-Doped La2O3 Nanophosphors by Combustion Synthesis

Science.gov (United States)

Zhang, Ying; Wu, Muying; Zhang, W. F.

Nanosized La2O3:Sm3+ and La2O3:Sm3+, Bi3+ phosphor powders were prepared via combustion synthesis. The structures and morphology were examined using powder X-ray diffraction and transmission electron microscope, respectively. The photoluminescence spectra were investigated at different doping concentrations of Sm3+ and Bi3+ ions. The results indicate that La2O3:Sm3+ (Bi3+) exhibited good crystallinity and spherical-like particles. All phosphors give emission bands centered at 564, 608 and 650 nm corresponding to 4G5/2→6HJ (J=5/2, 7/2 and 9/2) transitions of Sm3+ ions, respectively. Interestingly, the emission intensity of Sm3+ ions is significantly enhanced with the addition of Bi3+ ions to La2O3:Sm3+ and the maximum occurs at a Bi3+ concentration of 0.8 mol%. The La2O3:Sm3+, Bi3+ phosphor with highly enhanced luminescence is very encouraging for applications in display and tunable solid lasers.

Småhuse: Indretning og funktion

DEFF Research Database (Denmark)

Hansen, Ernst Jan de Place; Sigbrand, Lone; Frandsen, Anne Kathrine

Denne anvisning omhandler generelle krav og anbefalinger til indretning og funktion af nybyggede småhuse i henhold til bestemmelserne i Bygningsreglement 2010 (BR10). Småhuse - Indretning og funktionSmåhuse omfatter fritliggende og sammenbyggede enfamiliehuse med lodret lejlighedsskel i indtil...

Hyperfine fields of Fe in Nd2Fe14BandSm2Fe17N3

Science.gov (United States)

Akai, Hisazumi; Ogura, Masako

2015-03-01

High saturation magnetization of rare-earth magnets originates from Fe and the strong magnetic anisotropy stems from f-states of rare-earth elements such as Nd and Sm. Therefore the hyperfine fields of both Fe and rare-earth provide us with important pieces of information: Fe NMR enable us to detect site dependence of the local magnetic moment and magnetic anisotropy (Fe sites also contribute to the magnetic anisotropy) while rare-earth NQR directly give the information of electric field gradients (EFG) that are related to the shape of the f-electron cloud as well as the EFG produced by ligands. In this study we focus on the hyperfine fields of materials used as permanent magnets, Nd2Fe14BandSm2Fe17N3 from theoretical points of view. The detailed electronic structure together with the hyperfine interactions are discussed on the basis of the first-principles calculation. In particular, the relations between the observed hyperfine fields and the magnetic properties are studies in detail. The effects of doping of those materials by other elements such as Dy and the effects of N adding in Sm2Fe17N3 will be discussed. This work was supported by Elements Strategy Initiative Center for Magnetic Materials Project, the Ministry of Education, Culture, Sports, Science and Technology, Japan.

Transition to intermediate valence state and x-ray photoemission in Sm/sub 1-x/Gd/sub x/S

International Nuclear Information System (INIS)

Campagna, M.; Chui, S.T.; Wertheim, G.K.; Tosatti, E.

1976-01-01

We report a systematic x-ray photoemission study of the alloys Sm 1 /sub -//subx/Gd/subx/S for 0 2+ → Sm 3+ photoemission line shape using a model which has some similarities with the Jaccarino-Walker model for magnetic alloys. It assumes the existence of only two different kinds of Sm 2+ ions in Sm 1 /sub -//subx/Gd/subx/S for x approximately-less-than 16%. We discuss possible reasons for the fact that Gd does not show the usual clustering effects known to occur in many substitutional rare-earth alloys. Lattice-constant measurements for various substituents further illustrate the importance of electronic effects in the phase transition

Arterial injury promotes medial chondrogenesis in Sm22 knockout mice.

Science.gov (United States)

Shen, Jianbin; Yang, Maozhou; Jiang, Hong; Ju, Donghong; Zheng, Jian-Pu; Xu, Zhonghui; Liao, Tang-Dong; Li, Li

2011-04-01

Expression of SM22 (also known as SM22alpha and transgelin), a vascular smooth muscle cells (VSMCs) marker, is down-regulated in arterial diseases involving medial osteochondrogenesis. We investigated the effect of SM22 deficiency in a mouse artery injury model to determine the role of SM22 in arterial chondrogenesis. Sm22 knockout (Sm22(-/-)) mice developed prominent medial chondrogenesis 2 weeks after carotid denudation as evidenced by the enhanced expression of chondrogenic markers including type II collagen, aggrecan, osteopontin, bone morphogenetic protein 2, and SRY-box containing gene 9 (SOX9). This was concomitant with suppression of VSMC key transcription factor myocardin and of VSMC markers such as SM α-actin and myosin heavy chain. The conversion tendency from myogenesis to chondrogenesis was also observed in primary Sm22(-/-) VSMCs and in a VSMC line after Sm22 knockdown: SM22 deficiency altered VSMC morphology with compromised stress fibre formation and increased actin dynamics. Meanwhile, the expression level of Sox9 mRNA was up-regulated while the mRNA levels of myocardin and VSMC markers were down-regulated, indicating a pro-chondrogenic transcriptional switch in SM22-deficient VSMCs. Furthermore, the increased expression of SOX9 was mediated by enhanced reactive oxygen species production and nuclear factor-κB pathway activation. These findings suggest that disruption of SM22 alters the actin cytoskeleton and promotes chondrogenic conversion of VSMCs.

Microstructure and corrosion resistance of Sm-containing Al-Mn-Si-Fe-Cu alloy

Directory of Open Access Journals (Sweden)

Han Yuyin

2017-12-01

Full Text Available Optimizing alloy composition is an effective way to improve physical and chemical properties of automobile heat exchanger materials.A Sm-containing Al-Mn-Si-Fe-Cu alloy was investigated through transmission electron microscopy,scanning electron microscopy,and electrochemical measurement.Experimental results indicated that main phases distributed in the alloy wereα-Al(Mn,FeSi,Al2Sm and Al10Cu7Sm2.Alloying with Sm element could refine the precipitated α-Al(Mn,FeSi phase.Polarization testing results indicated that the corrosion surfacewas mainly composed of pitting pits and corrosion products.Sea water acetic acid test(SWAAT showed that corrosion loss increased first and then slowed downwith increase of the corrosion time.

Synthesis and bio-evaluation of nano-hydroxyapatite trapped by 153Sm

International Nuclear Information System (INIS)

Bing Wenzeng; Luo Shunzhong; Wen Guanghua; Jiang Shubin; Xiong Xiaoling; Liu Guoping

2006-03-01

After nanoHA was synthesized, 153 Sm-EDTMP-nanoHA and 153 Sm-citrate-nanoHA were prepared and proved stable in vitro. ECT images of New Zealand rabbits injected with 153 Sm-EDTMP-nanoHA had better contrast, skeletal figure visible, liver and spleen clear. The images of 153 Sm-citrate-nanoHA showed a similar results but kidney invisible, which meant 153 Sm-citrate-nanoHA showed a similar results but kidney invisible, which meant 153 Sm-citrate-nanoHA was mainly excreted through liver and gall. 153 Sm-EDTMP-nanoHA's half effective inhibition concentrations to SMMC-7721 and MCF-7 cells were 1.98 g/L and 0.075 g/L respectively and 153 Sm-citrate-nanoHA's were 1.89 g/L and 0.094 g/L proportionally. 153 Sm-EDTMP-nanoHA and 153 Sm-citrate-nanoHA were worthy of a further research because their half effective inhibition concentrations were much lower than ones of the single nanoHA. (authors)

Measurement of N and C diffusion in Sm{sub 2}Fe{sub 17} by magnetic relaxation

Energy Technology Data Exchange (ETDEWEB)

Mommer, N.; Hirscher, M.; Gerlach, M.; Van Lier, J.; Kronmueller, H. [Max-Planck-Institut fuer Metallforschung, Stuttgart (Germany); Kubis, M.; Mueller, K.-H. [Institut fuer Festkoerper und Werkstofforschung, Institut fuer Metallische Werkstoffe, D-01171 Dresden (Germany)

1998-10-02

Magnetic after-effect (MAE) measurements of nitrided and carburized Sm{sub 2}Fe{sub 17} compounds were performed in the temperature range of 140 K to 480 K. Both nitrided and carburized compounds show relaxation maxima at 285 and 300 K, respectively, which are absent in pure Sm{sub 2}Fe{sub 17} compounds. Therefore, these relaxation maxima are attributed to jumps of interstitially dissolved nitrogen or carbon atoms. Numerical evaluation yielded an activation enthalpy Q{sup N} (0.84{+-}0.05) eV and a pre-exponential factor {tau}{sub 0}{sup N}=3.10{sup -15{+-}1} s for the short-range diffusion of N atoms. The corresponding values for the carbon diffusion are Q{sup C}=(0.91{+-}0.05) eV and {tau}{sub 0}{sup C}=1.10{sup -15{+-}1} s. The carbon and nitrogen content of the samples was determined from the increase in mass during nitrogenation or carburization to Sm{sub 2}Fe{sub 17}N{sub 1.2} and Sm{sub 2}Fe{sub 17}C{sub 2.6}. (orig.) 18 refs.

Effects of Sm3+/Yb3+ co-doping and temperature on the Raman, IR spectra and structure of [TeO2-GeO2-K2O-Sm2O3/Yb2O3] glasses

International Nuclear Information System (INIS)

Shaltout, I.; Badr, Y.

2006-01-01

Effects of Sm 3+ /Yb 3+ co-doping on Raman scattering, IR absorption, temperature dependence of the Raman spectra up to 210 o C and the structure of two glass systems of the composition (80TeO 2 -10GeO 2 -8K 2 O-2Sm 2 O 3 /Yb 2 O 3 ) is discussed. It was found that the addition of Yb 3+ to the glass very strongly enhances the intensities of the antistokes' Raman bands at 155, 375, 557 and 828 cm -1 and quenches both the intensities of the stokes' vibration modes of the TeO 4 units in the range of 120-770 cm -1 and the intensities of the OH - stretching vibration modes in the range of 2600-3300 cm -1 . Sm 2 O 3 /Yb 2 O 3 rare earth co-doping has a great influence on removing and/or changing the nature of the OH - groups. The appearance and splitting of the stretching vibration modes of the OH - groups at lower frequencies (2770, 2970 cm -1 ) for the Sm +3 singly doped glass sample, compared to the band at ∼3200 cm -1 for the Sm 3+ /Yb 3+ co-doped glass sample, suggested that the OH - groups are more strongly bonded and incorporated with the glass matrix for the singly doped glass. Heating the sample up continuously weakens the hydrogen bonding of the OH - groups to the glass matrix leading to creation of NBO and breakdown of the connectivity of the OH - groups to the TeO 4 , TeO 3+1 and TeO 3 structural units. Raman bands at 286, 477, 666 and 769 cm -1 were assigned to its respective vibrations of Te 2 O 7 , TeO 4 -4 species, the (Te-O-Te) bending vibrations of the TeO 4 triagonal bipyramids (tbps), the axial symmetric stretching vibration modes (Te ax -O) s with bridging oxygen BO atoms and to the (Te-O) nbo non-bridging stretching vibration modes of the TeO 3+1 and/or TeO 3 pyramids

Model SM-1 ballast density gauge

International Nuclear Information System (INIS)

Gao Weixiang; Fang Jidong; Zhang Xuejuan; Zhang Reilin; Gao Wanshan

1990-05-01

The ballast density is one of the principal parameters for roadbed operating state. It greatly affects the railroad stability, the accumulation of railroad residual deformation and the amount of work for railroad maintenance. SM-1 ballast density gauge is designed to determine the density of ballast by using the effect of γ-ray passed through the ballast. Its fundamentals, construction, specifications, application and economic profit are described

Purification of the spliced leader ribonucleoprotein particle from Leptomonas collosoma revealed the existence of an Sm protein in trypanosomes. Cloning the SmE homologue.

Science.gov (United States)

Goncharov, I; Palfi, Z; Bindereif, A; Michaeli, S

1999-04-30

Trans-splicing in trypanosomes involves the addition of a common spliced leader (SL) sequence, which is derived from a small RNA, the SL RNA, to all mRNA precursors. The SL RNA is present in the cell in the form of a ribonucleoprotein, the SL RNP. Using conventional chromatography and affinity selection with 2'-O-methylated RNA oligonucleotides at high ionic strength, five proteins of 70, 16, 13, 12, and 8 kDa were co-selected with the SL RNA from Leptomonas collosoma, representing the SL RNP core particle. Under conditions of lower ionic strength, additional proteins of 28 and 20 kDa were revealed. On the basis of peptide sequences, the gene coding for a protein with a predicted molecular weight of 11.9 kDa was cloned and identified as homologue of the cis-spliceosomal SmE. The protein carries the Sm motifs 1 and 2 characteristic of Sm antigens that bind to all known cis-spliceosomal uridylic acid-rich small nuclear RNAs (U snRNAs), suggesting the existence of Sm proteins in trypanosomes. This finding is of special interest because trypanosome snRNPs are the only snRNPs examined to date that are not recognized by anti-Sm antibodies. Because of the early divergence of trypanosomes from the eukaryotic lineage, the trypanosome SmE protein represents one of the primordial Sm proteins in nature.

High power density cell using nanostructured Sr-doped SmCoO3 and Sm-doped CeO2 composite powder synthesized by spray pyrolysis

Science.gov (United States)

Shimada, Hiroyuki; Yamaguchi, Toshiaki; Suzuki, Toshio; Sumi, Hirofumi; Hamamoto, Koichi; Fujishiro, Yoshinobu

2016-01-01

High power density solid oxide electrochemical cells were developed using nanostructure-controlled composite powder consisting of Sr-doped SmCoO3 (SSC) and Sm-doped CeO2 (SDC) for electrode material. The SSC-SDC nano-composite powder, which was synthesized by spray pyrolysis, had a narrow particle size distribution (D10, D50, and D90 of 0.59, 0.71, and 0.94 μm, respectively), and individual particles were spherical, composing of nano-size SSC and SDC fragments (approximately 10-15 nm). The application of the powder to a cathode for an anode-supported solid oxide fuel cell (SOFC) realized extremely fine cathode microstructure and excellent cell performance. The anode-supported SOFC with the SSC-SDC cathode achieved maximum power density of 3.65, 2.44, 1.43, and 0.76 W cm-2 at 800, 750, 700, and 650 °C, respectively, using humidified H2 as fuel and air as oxidant. This result could be explained by the extended electrochemically active region in the cathode induced by controlling the structure of the starting powder at the nano-order level.

Calculated and experimental definition of neutron-physical and temperature conditions of material testing in the SM reactor

International Nuclear Information System (INIS)

Toporova, V.G.; Pimenov, V.V.

2004-01-01

Full text: Reactor material science is one of the main scientific directions of the RIAR activities. Particularly, a wide range of materials and products testing under irradiation is performed in reactor facility SM (RF SM). To solve the tasks specified in the technical specification for an experiment, previously, the test conditions are chosen. At the minimum a space-energy distribution of neutrons and heating rate in the materials under test are important as well as temperature conditions of irradiation. The up-to-date software and libraries of nuclear data allow modeling of neutron-material interaction processes to a considerable degree of details and also obtaining a true neutron distribution by calculation methods. As a result of a great scope of work on verification, a calculation model, developed on the basis of a package of applied software MCU (option MCU-4/SM22) and analogue Monte-Carlo method, is widely used at RIAR. The MCU geometric module makes it possible to model the SM core and reflector in three-dimensional geometry with sufficient accuracy and to describe all elements of the channel structure and irradiation device with specimens. The calculation model of RF SM is tested using the results of activation experiments performed in its critical assembly, geometric parameters and structural materials of which correspond completely with the prototype. The difference in the calculated and experimental values is less than 2.5%. Possibilities of the calculated estimation of operating temperature conditions of absorbing elements under irradiation should be considered separately. As the conducted calculations and their analysis show, to define the fuel column temperature correctly, one needs reliable data on thermal-physical parameters of materials, especially ceramic ones, such as titanium, dysprosium or boron carbide. This is very important for boron carbide-absorbing elements for actually all their operation parameters (such as: gas release, swelling

Electrochemical preparation of Al–Sm intermetallic compound whisker in LiCl–KCl Eutectic Melts

International Nuclear Information System (INIS)

Ji, De−Bin; Yan, Yong−De; Zhang, Mi−Lin; Li, Xing; Jing, Xiao−Yan; Han, Wei; Xue, Yun; Zhang, Zhi−Jian; Hartmann, Thomas

2015-01-01

Highlights: • The reduction process of Sm(III) was investigated in LiCl–KCl melt on an aluminum electrode at 773 K. • Al–Sm alloy with different phase structure (Al 2 Sm and Al 3 Sm) was prepared by potentiostatic electrolysis on an aluminum electrode with the change of electrolytic potentials and time in LiCl–KCl–SmCl 3 melts. • Al − Sm alloy containing whiskers (Al 4 Sm) was obtained by potentiostatic electrolysis (−2.10 V) on an aluminum electrode for 7 hours with the change of electrolytic temperature and cooling rate in LiCl–KCl–SmCl 3 (16.5 wt. %) melts. The results from micro–hardness test and potentiodynamic polarization test show the micro hardness and corrosion property are remarkably improved with the help of Al–Sm intermetallic compound whiskers. - Abstract: This work presents the electrochemical study of Sm(III) on an aluminum electrode in LiCl–KCl melts at 773 K by different electrochemical methods. Three electrochemical signals in cyclic voltammetry, square wave voltammetry, open circuit chronopotentiometry, and cathode polarization curve are attributed to different kinds of Al–Sm intermetallic compounds, Al 2 Sm, Al 3 Sm, and Al 4 Sm, respectively. Al–Sm alloy with different phase structure (Al 2 Sm and Al 3 Sm) could be obtained by the potentiostatic electrolysis with the change of electrolytic potentials and time. Al–Sm alloy containing whiskers (Al 4 Sm) was obtained by potentiostatic electrolysis (−2.10 V) on an aluminum electrode for 7 hours with the change of electrolytic temperature and cooling rate in LiCl–KCl–SmCl 3 (16.5 wt. %) melts. The XRD and SEM&EDS were employed to investigate the phase composition and microstructure of Al–Sm alloy. SEM analysis shows that lots of needle−like precipitates formed in Al–Sm alloy, and their ratios of length to diameter are found to be greater than 10 to 1. The TEM and electron diffraction pattern were performed to investigate the crystal structure of the

A study of (Ba0.5Sr0.5)1-xSm xCo0.8Fe0.2O3-δ as a cathode material for IT-SOFCs

International Nuclear Information System (INIS)

Li Shuyan; Lue Zhe; Wei Bo; Huang Xiqiang; Miao Jipeng; Cao Gang; Zhu Ruibin; Su Wenhui

2006-01-01

(Ba 0.5 Sr 0.5 ) 1-x Sm x Co 0.8 Fe 0.2 O 3-δ (BSSCF; x = 0.05-0.15) compounds were synthesized with EDTA-Pechini method and characterized by powder X-ray diffraction (XRD), electrical conductivity and thermal expansion coefficient (TEC) measurements, as well as the electrochemical impedance spectra measurement. According to the XRD results, the main phase of the material belongs to the cubic perovskite-type, and the lattice contracting with the increasing contents of Sm 3+ . The TEC of the compounds is 19.1-20.3 x 10 -6 K -1 from 30 to 800 deg. C, which close to the values of Co-based materials, such as Ba 0.5 Sr 0.5 Co 0.8 Fe 0.2 O 3-δ (BSCF). And the conductivity of BSSCF is higher than that of BSCF; e.g., about 212% higher at 500 deg. C for the x = 0.15 compound. Electrochemical impedance spectra at intermediate temperature revealed the better electrochemical performance of BSSCF than BSCF; e.g., the total resistance values of BSSCF electrode is 2.98 Ω cm 2 at 500 deg. C, nearly 50% lower than that of BSCF

Ba2ZnWO6:Sm3+ as promising orange-red emitting phosphors: Photoluminescence properties and energy transfer process

Science.gov (United States)

Chen, Peng; Hu, Wenyuan; Yang, Dingming; Zhu, Jiayi; Zhang, Jing; Wu, Yadong

2018-02-01

Novel orange-red emitting phosphors, Ba2Zn1-xWO6:xSm3+ (x = 0.03, 0.04, 0.05, 0.06 and 0.07) (BZW:Sm3+), were prepared using a high-temperature solid-state reaction method. Their crystal structure and photoluminescence properties were characterized and the mechanism of energy transfers between Ba2ZnWO6 and Sm3+ elucidated in detail. It was found that the phosphors had a cubic structure with space group Fm 3 bar m . They can be excited by near-ultraviolet light, and the characteristic emissions of Sm3+ ions are observed at 564 nm, 598 nm and 645 nm, corresponding to 4G5/2 → 6H5/2, 4G5/2 → 6H7/2 and 4G5/2 → 6H9/2 transitions, respectively. The 4G5/2 → 6H9/2 transitions shows the greatest intensity, which indicates that Sm3+ ions occupy the noncentrosymmetric sites. The optimal doping concentration of Sm3+ ions in Ba2ZnWO6 is about 5 mol% and the phenomenon of concentration quenching occurs when the content of Sm3+ ions exceeds 5 mol%. All results show that the Ba2ZnWO6:Sm3+ phosphor holds great promise for use in high-quality white light-emitting diodes.

Catalytic properties of oxygen adsorbed on NiO-Sm/sub 2/O/sub 3/ binary oxides

Energy Technology Data Exchange (ETDEWEB)

Tadasu, Y.; Niwa, H.; Matsuda, Y.

1978-02-01

Various rare earths were screened as promoters for a nickel oxidation catalyst, and samarium (Sm) was selected for further studies. The activity of a physical mixture of NiO/Sm/sub 2/O/sub 3/ and SiC for the oxidation of 500 ppm nitric oxide with 5% oxygen in nitrogen to nitrogen dioxide at 320/sup 0/C went through a maximum with increasing Sm/sub 2/O/sub 3/ content of the catalyst. The most active catalyst, which contained 3.75% Sm/sub 2/O/sub 3/, was 3.7 times as active as pure nickel oxide. Temperature-programed desorption of oxygen from the catalysts revealed three peaks, ..cap alpha.. at 220/sup 0/-230/sup 0/C ..beta.. at 370/sup 0/-380/sup 0/C, and ..gamma.. at 530/sup 0/-540/sup 0/C, for all catalysts except pure Sm/sub 2/O/sub 3/. The amount of adsorbed oxygen increased with increasing Sm/sub 2/O/sub 3/ content to 3.75%, and then decreased with further Sm/sub 2/O/sub 3/ increases. The catalytic activity was correlated to oxygen in the ..beta..-state. Graphs, spectra, and table.

Guided ion beam and theoretical studies of the bond energy of SmS+

Science.gov (United States)

Armentrout, P. B.; Demireva, Maria; Peterson, Kirk A.

2017-12-01

Previous work has shown that atomic samarium cations react with carbonyl sulfide to form SmS+ + CO in an exothermic and barrierless process. To characterize this reaction further, the bond energy of SmS+ is determined in the present study using guided ion beam tandem mass spectrometry. Reactions of SmS+ with Xe, CO, and O2 are examined. Results for collision-induced dissociation processes with all three molecules along with the endothermicity of the SmS+ + CO → Sm+ + COS exchange reaction are combined to yield D0(Sm+-S) = 3.37 ± 0.20 eV. The CO and O2 reactions also yield a SmSO+ product, with measured endothermicities that indicate D0(SSm+-O) = 3.73 ± 0.16 eV and D0(OSm+-S) = 1.38 ± 0.27 eV. The SmS+ bond energy is compared with theoretical values characterized at several levels of theory, including CCSD(T) complete basis set extrapolations using all-electron basis sets. Multireference configuration interaction calculations with explicit spin-orbit calculations along with composite thermochemistry using the Feller-Peterson-Dixon method and all-electron basis sets were also explored for SmS+, and for comparison, SmO, SmO+, and EuO.

Mass of the 158Sm

International Nuclear Information System (INIS)

Zhao Kui; Guo Jiyu; Lu Xiuqin; Cheng Yehao; Huang Xiaolin; Ma Yong; Li Shuyuan; Ruan Ming; Li Zhichang; Jiang Chenglie

1997-01-01

A preliminary result was reported for the experiment to determine the mass of the heavier neutron-rich nucleus 158 Sm using the 160 Gd( 18 O, 20 Ne) two proton transfer reaction in last progress report. The average Q-value of (4.046 +- 0.102) MeV for the 160 Gd( 18 O, 20 Ne) 158 Sm reaction is given. A mass excess for 158 Sm of (-65.738 +- 0.102) MeV was derived. This is the first experimentally measured value of the mass of 158 Sm which is about 450 keV higher than the evaluation value from systematic trends listed in the 1993 atomic mass table. The new prediction shows better agreement with the measured values and a significant improvement over the earlier FRDM (finite-range droplet model) value

The Preparation and Optical Properties of Novel LiLa(MoO4)2:Sm3+,Eu3+ Red Phosphor

Science.gov (United States)

Luo, Li; Huang, Baoyu; He, Jingqi; Zhang, Wei; Zhao, Weiren; Wang, Jianqing

2018-01-01

Novel LiLa1−x−y(MoO4)2:xSm3+,yEu3+ (in short: LL1−x−yM:xSm3+,yEu3+) double molybdate red phosphors were synthesized by a solid-state reaction at as low temperature as 610 °C. The optimal doping concentration of Sm3+ in LiLa1−x(MoO4)2:xSm3+ (LL1−xM:xSm3+) phosphor is x = 0.05 and higher concentrations lead to emission quenching by the electric dipole—electric dipole mechanism. In the samples co-doped with Eu3+ ions, the absorption spectrum in the near ultraviolet and blue regions became broader and stronger than these of the Sm3+ single-doped samples. The efficient energy transfer from Sm3+ to Eu3+ was found and the energy transfer efficiency was calculated. Under the excitation at 403 nm, the chromaticity coordinates of LL0.95−yM:0.05Sm3+,yEu3+ approach to the NTSC standard values (0.670, 0.330) continuously with increasing Eu3+ doping concentration. The phosphor exhibits high luminous efficiency under near UV or blue light excitation and remarkable thermal stability. At 150 °C, the integrated emission intensity of the Eu3+ remained 85% of the initial intensity at room temperature and the activation energy is calculated to be 0.254 eV. The addition of the LL0.83M:0.05Sm3+,0.12Eu3+ red phosphors can improve the color purity and reduce the correlated color temperature of WLED lamps. Hence, LL1−x−yM:xSm3+,yEu3+ is a promising WLED red phosphor. PMID:29443910

Sr{sub 2}SmNbO{sub 6} perovskite: Synthesis, characterization and density functional theory calculations

Energy Technology Data Exchange (ETDEWEB)

Dutta, Alo, E-mail: alo_dutta@yahoo.com [Department of Condensed Matter Physics and Material Sciences, S. N. Bose National Centre for Basic Sciences, Block-JD, Sector III, Salt Lake, Kolkata, 700106 (India); Mukhopadhyay, P.K. [Department of Condensed Matter Physics and Material Sciences, S. N. Bose National Centre for Basic Sciences, Block-JD, Sector III, Salt Lake, Kolkata, 700106 (India); Sinha, T.P. [Department of Physics, Bose Institute, 93/1 Acharya Prafulla Chandra Road, Kolkata, 700 009 (India); Shannigrahi, Santiranjan [Institute of Materials Research and Engineering, Agency for Science Technology and Research, 3 Research Link, Singapore, 117602 (Singapore); Himanshu, A.K.; Sen, Pintu; Bandyopadhyay, S.K. [Variable Energy Cyclotron Centre, 1/AF Bidhannagar, Kolkata, 700064 (India)

2016-08-15

The density functional theory (DFT) under the generalized gradient approximation (GGA) has been used to investigate the electronic structure of double perovskite oxide Sr{sub 2}SmNbO{sub 6} synthesized by the solid-state reaction technique. The Rietveld refinement of the X-ray diffraction pattern of the sample shows the monoclinic P2{sub 1}/n phase at room temperature. The X-ray photoemission spectrum (XPS) of the material is collected in the energy window of 0–1200 eV. The chemical shift of the constituent elements calculated from the core level XPS spectra is used to analyze the covalency between the O anion and Sm/Nb cations. The valence band (VB) XPS spectrum is compared with the calculated VB spectrum using partial density of states in a standard way. The Raman spectrum is employed to investigate the phonon modes of the material in the monoclinic phase. Lorentzian lines are used to fit the experimental Raman spectrum, which present 24 phonon modes corresponding to the stretching and banding of NbO{sub 6}/SmO{sub 6} octahedra and translational motion of Sr along the Sr−O bond. The discrepancy between the measured and calculated band gap values has been removed by applying modified Becke-Johnson (mBJ) potential in the DFT calculations. The experimental optical band gap obtained from the UV–visible reflectance spectrum is found to be 3.42 eV, which is well matched with the DFT calculated value of 3.2 eV, and suggests the semiconducting nature of the material. The real (ε′) and imaginary (ε″) parts of the optical dielectric constant as a function of energy along the x-, y- and z-polarization directions using mBJ potential are calculated. The collective vibrational modes of the atoms, the Born effective charge of the ions and their effect on the static dielectric constant of the material are studied using DFT. The calculated value of static dielectric constant for SSN is found to be 41.3. - Highlights: • Electronic structure and dynamical

Polarized spectral properties of Sm3+:LiYF4 crystal

International Nuclear Information System (INIS)

Wang, G.Q.; Lin, Y.F.; Gong, X.H.; Chen, Y.J.; Huang, J.H.; Luo, Z.D.; Huang, Y.D.

2014-01-01

A trivalent samarium-doped LiYF 4 single crystal was grown by the vertical Bridgman technique. Its polarized absorption and fluorescence spectra and fluorescence decay curves were recorded at room temperature. On the basis of the Judd–Ofelt theory, the spectral parameters of the Sm 3+ :LiYF 4 crystal were calculated. The emission cross sections for the 4 G 5/2 → 6 H J (J=5/2, 7/2. 9/2, and 11/2) transitions of special interest for visible laser application were obtained by the Fuchtbauer–Ladenburg formula. -- Highlights: • Polarized spectral properties of Sm 3+ :LiYF 4 crystal at room temperature were analyzed in detail. • The emission cross sections for the transitions of special interest for visible laser application are calculated. • Sm 3+ :LiYF 4 is a promising laser material for 401 nm GaN LD pumped 605 nm visible laser

Schistosome tegumental ecto-apyrase (SmATPDase1 degrades exogenous pro-inflammatory and pro-thrombotic nucleotides

Directory of Open Access Journals (Sweden)

Akram A. Da’dara

2014-03-01

Full Text Available Schistosomes are parasitic worms that can survive in the hostile environment of the human bloodstream where they appear refractory to both immune elimination and thrombus formation. We hypothesize that parasite migration in the bloodstream can stress the vascular endothelium causing this tissue to release chemicals alerting responsive host cells to the stress. Such chemicals are called damage associated molecular patterns (DAMPs and among the most potent is the proinflammatory mediator, adenosine triphosphate (ATP. Furthermore, the ATP derivative ADP is a pro-thrombotic molecule that acts as a strong activator of platelets. Schistosomes are reported to possess at their host interactive tegumental surface a series of enzymes that could, like their homologs in mammals, degrade extracellular ATP and ADP. These are alkaline phosphatase (SmAP, phosphodiesterase (SmNPP-5 and ATP diphosphohydrolase (SmATPDase1. In this work we employ RNAi to knock down expression of the genes encoding these enzymes in the intravascular life stages of the parasite. We then compare the abilities of these parasites to degrade exogenously added ATP and ADP. We find that only SmATPDase1-suppressed parasites are significantly impaired in their ability to degrade these nucleotides. Suppression of SmAP or SmNPP-5 does not appreciably affect the worms’ ability to catabolize ATP or ADP. These findings are confirmed by the functional characterization of the enzymatically active, full-length recombinant SmATPDase1 expressed in CHO-S cells. The enzyme is a true apyrase; SmATPDase1 degrades ATP and ADP in a cation dependent manner. Optimal activity is seen at alkaline pH. The Km of SmATPDase1 for ATP is 0.4 ± 0.02 mM and for ADP, 0.252 ± 0.02 mM. The results confirm the role of tegumental SmATPDase1 in the degradation of the exogenous pro-inflammatory and pro-thrombotic nucleotides ATP and ADP by live intravascular stages of the parasite. By degrading host inflammatory signals

The comparative study on microstructure and properties of nano-CeO 2 and Sm 2O 3 particulate reinforced nickel-based composites by laser deposition

Science.gov (United States)

Zhang, Shihong; Li, Mingxi; Yoon, Jae Hong; Cho, Tong Yul; Lee, Chan Gyu; He, Yizhu

2008-09-01

Micron size Ni-based alloy (NBA) powders are mixed with both 1.5 wt% nano-CeO 2 (n-CeO 2) and nano-Sm 2O 3 (n-Sm 2O 3) powders. These mixtures are coated on low carbon steel by laser deposition. Based on the thermodynamic characteristic of rare earth oxides, evolution of microstructure and variety of phase and properties of the coatings by the addition of n-CeO 2 and Sm 2O 3 powders to NBA have been investigated comparatively. The morphology of dendrite is transformed from bulky without n-CeO 2 and Sm 2O 3 into fine and compact with the addition of 1.5% n-CeO 2 and Sm 2O 3. And lamellar spacing of the eutectic of n-CeO 2/NBA is smaller than that of n-Sm 2O 3/NBA. The microhardness, wear resistance and corrosion resistance of the coatings are greatly improved by n-CeO 2 and Sm 2O 3 powder addition.

The comparative study on microstructure and properties of nano-CeO2 and Sm2O3 particulate reinforced nickel-based composites by laser deposition

International Nuclear Information System (INIS)

Zhang Shihong; Li Mingxi; Yoon, Jae Hong; Cho, Tong Yul; Lee, Chan Gyu; He Yizhu

2008-01-01

Micron size Ni-based alloy (NBA) powders are mixed with both 1.5 wt% nano-CeO 2 (n-CeO 2 ) and nano-Sm 2 O 3 (n-Sm 2 O 3 ) powders. These mixtures are coated on low carbon steel by laser deposition. Based on the thermodynamic characteristic of rare earth oxides, evolution of microstructure and variety of phase and properties of the coatings by the addition of n-CeO 2 and Sm 2 O 3 powders to NBA have been investigated comparatively. The morphology of dendrite is transformed from bulky without n-CeO 2 and Sm 2 O 3 into fine and compact with the addition of 1.5% n-CeO 2 and Sm 2 O 3 . And lamellar spacing of the eutectic of n-CeO 2 /NBA is smaller than that of n-Sm 2 O 3 /NBA. The microhardness, wear resistance and corrosion resistance of the coatings are greatly improved by n-CeO 2 and Sm 2 O 3 powder addition

Soil Moisture Active Passive Mission L4_SM Data Product Assessment (Version 2 Validated Release)

Science.gov (United States)

Reichle, Rolf Helmut; De Lannoy, Gabrielle J. M.; Liu, Qing; Ardizzone, Joseph V.; Chen, Fan; Colliander, Andreas; Conaty, Austin; Crow, Wade; Jackson, Thomas; Kimball, John;

Simplified syntheses of the water-soluble chiral shift reagents Sm-(R)-pdta and Sm-(S)-pdta

Czech Academy of Sciences Publication Activity Database

Hrubá, L.; Buděšínský, Miloš; Pícha, Jan; Jiráček, Jiří; Vaněk, Václav

2013-01-01

Roč. 54, č. 47 (2013), s. 6296-6297 ISSN 0040-4039 Institutional support: RVO:61388963 Keywords : NMR * chiral shift reagents * Sm-pdta * PDTA * samarium * 1,2-diaminopropane Subject RIV: CC - Organic Chemistry Impact factor: 2.391, year: 2013

The RELixSn2 (RE=La–Nd, Sm, and Gd; 0≤x<1) series revisited. Synthesis, crystal chemistry, and magnetic susceptibilities

International Nuclear Information System (INIS)

Makongo, Julien P.A.; Suen, Nian-Tzu; Guo, Shengping; Saha, Shanta; Greene, Richard; Paglione, Johnpierre; Bobev, Svilen

2014-01-01

This study is concerned with the ternary compounds RELi x Sn 2 (RE=La–Nd, Sm, and Gd; 0≤x 2 phases. These materials crystallize with the base-centered orthorhombic space group Cmcm (No. 63), and can be formally assigned with the CeNiSi 2 structure type (Pearson symbol oC16). Our systematic single-crystal X-ray diffraction studies revealed substantial Li-deficiencies in all cases, with SmSn 2 (space group Cmmm, ZrGa 2 structure type, Pearson symbol oC12) and GdSn 2 (space group Cmcm, ZrSi 2 structure type, Pearson symbol oC12) being completely lithium-free. The structure refinements also uncovered positional disorder on the Sn site neighboring the vacancies. The Sn-disorder and the Li-deficiency correlate, and vary monotonically with the decreased size of the rare-earth atoms in the order RE=La–Nd. The SmSn 2 and GdSn 2 structures are devoid of any disorder. Temperature-dependent studies of the magnetic response of the title compounds are also presented and discussed. -- Graphical abstract: RELi x Sn 2 (RE=La–Nd, 0≤x 2 structure type (a). The Sn-disorder and the Li-deficiency correlate, and vary monotonically with the decreased size of the rare-earth atoms in the order RE=La–Nd. The SmSn 2 (b) and GdSn 2 (c) structures are devoid of any disorder. Highlights: • The crystal structures of the RELi x Sn 2 (RE=La–Nd, 0≤x 2 structure type or defect variant of the CeNiSi 2 structure type. • SmSn 2 is isotypic with the ZrGa 2 structure, while RESn 2 (RE=Gd–Lu) are isotypic with the ZrSi 2 structure

The monomeric orphan nuclear receptor Schistosoma mansoni Ftz-F1 dimerizes specifically and functionally with the schistosome RXR homologue, SmRXR1

International Nuclear Information System (INIS)

Bertin, Benjamin; Caby, Stephanie; Oger, Frederik; Sasorith, Souphatta; Wurtz, Jean-Marie; Pierce, Raymond J.

2005-01-01

In an attempt to understand development and differentiation processes of the parasitic blood fluke Schistosoma mansoni, several members of the nuclear receptor superfamily were cloned, including SmFtz-F1 (S. mansoni Fushi Tarazu-factor 1). The Ftz-F1 nuclear receptor subfamily only contains orphan receptors that bind to their response element as monomers. Whereas SmFtz-F1 displays these basic functional properties, we have identified an original and specific interaction between SmFtz-F1 and the schistosome RXR homologue, SmRXR1. The mammalian two-hybrid assay showed that the D, E, and F domains of SmFtz-F1 were capable of interacting specifically with the E domain of SmRXR1 but not with that of mouse RXRα. Using three-dimensional LBD homology modelling and structure-guided mutagenesis, we were able to demonstrate the essential role of exposed residues located in the dimerization interfaces of both receptors in the maintenance of the interaction. Cotransfection experiments with constructions encoding full-length nuclear receptors show that SmRXR1 potentiates the transcriptional activity of SmFtz-F1 from various promoters. Nevertheless, the lack of identification of a dimeric response element for this SmFtz-F1/SmRXR1 heterodimer seems to indicate a 'tethering' mechanism. Thus, our results suggest for the first time that a member of the Ftz-F1 family could heterodimerize functionally with a homologue of the universal heterodimerization partner of nuclear receptors. This unique property confirms that SmFtz-F1 may be involved in the development and differentiation of schistosome-specific structures

Preparation of Sm3H7 nanoparticles and their application in ammonia synthesis

International Nuclear Information System (INIS)

Liu Tong; Zhang Yaohua; Li Xingguo

2006-01-01

Sm 3 H 7 nanoparticles have been successfully produced by hydrogen plasma-metal reaction (HPMR) method, and then used to synthesize ammonia at 298 K and 1 atm. The morphologies of the Sm 3 H 7 nanoparticles before and after reaction were investigated by transmission electron microscopy, and the crystal structures at different steps by X-ray diffraction. Nessler's test was adopted to detect ammonia. It was found that the passivated Sm 3 H 7 nanoparticles possess polyhedron shape and smooth surface, with the average size of about 50 nm and the specific surface area 11.2 m 2 g -1 . It was proposed that Sm 3 H 7 nanoparticles react with oxygen and nitrogen to form ammonia, but ammonia production is not observable in the case of coarse particles. After ammonia synthesis, the morphology of Sm 3 H 7 nanoparticles changes into spongy surface and the mean particle size and specific surface area increase to 100 nm and 28.6 m 2 g -1 , respectively, due to the release of hydrogen. The hydrogen conversion percentage from samarium hydride is estimated to be 1.5%. Without O 2 , Sm 3 H 7 nanoparticles cannot react with N 2 or N 2 + H 2 at 298 K and 1 atm

Synthesis, characterization and antimicrobial activity of some nitrilotriacetic acid−V(III, −Sn(II, −Sm(II and −Sm(III complexes

Directory of Open Access Journals (Sweden)

Mohsen S. Asker

2011-04-01

Full Text Available Four new complexes [V(NTA(H2O 2]•H2O (1, H[Sn(NTA] (2, H[Sm(NTA]•H2O (3, and [Sm(NTA(H2O 2]•H2O (4 were obtained during the reactions of metal salts (VCl3, SnCl2•2H2O, SnCl4, Sm(NO32•6H2O and SmCl3•6H2O with nitrilotriacetic acid, H3NTA. The infrared and 1H-NMR spectra of the solid complexes have been obtained and assigned. Thermogravimetric analyses were also carried out. The data obtained agree with the proposed structures and show that the complexes decomposed to the corresponding metal oxide. The ligand and their metal complexes were screened for their antimicrobial activities by the agar-well diffusion technique using DMSO as a solvent against the following bacterial species: Bacillus subtilis, Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa and antifungal activity against Aspergillus niger, Aspergillus flavus, Saccharomyces cerevisiae and Candida albicans. The obtained results were compared with some types of known antibiotics. The minimum inhibitory concentration (MIC values were calculated at 30 °C for 24−48 h. The activity data show that the complexes are more potent antimicrobials than the parent ligand.

Influence of ground state correlations on the properties of the first 2+ and 3- states in some Sm isotopes

International Nuclear Information System (INIS)

Navrotskaya-Rybarska, V.; Stoyanova, O.; Stoyanov, Ch.

1980-01-01

The influence of ground state correlations and of their coupling with the phonon amplitudes on the properties of the first collective states is investigated in some Sm isotopes. Equations for the eXcited state energies are derived using the variational principle. Formulae for the gap and quasiparticle energies are given. The numerical calculations are performed for sup(144-150)Sm. The energies of the 2 + - and 3 - - states and the B(E2) and B(E3) electric transition probability values are presented. The effects studied are shown to be small for sup(144-146)Sm but the collectivity of the 2sub(1)sup(+) and 3sub(1)sup(-) states decreases strongly for 150 Sm [ru

Multifunctional Sm2-xDyxZr2O7 pyrochlore system: potential ionic conductors and photocatalysts

International Nuclear Information System (INIS)

Grover, V.; Sayed, Farheen N.; Bhattacharyya, K.; Jain, D.; Pillai, C.G.S.; Tyagi, A.K.; Arya, A.

2010-01-01

Full text: Pyrochlores have garnered considerable interest over the years because of a range of potentially useful properties such as fast-ion (mainly anion) conductivity, electrical conductivity, catalysis, luminescence etc. In present work a series of Sm 2-x Dy x Zr 2 O 7 compounds (0.0 ≤ x ≤ 2.0) were synthesized by gel combustion and characterized by Powder XRD and Raman spectroscopic studies. XRD studies revealed the system to be single-phasic throughout with the retention of pyrochlore phase till 40 mol% of Dy 3+ beyond which, an order-disorder phase transition occurred resulting in a defect fluorite structure. Surprisingly, Raman studies showed the retention of pyrochlore type ordering till the other end member, i.e. Dy 2 Zr 2 O 7 . This is the first study, which reports the retention of a weak pyrochlore type superstructure in Dy 2 Zr 2 O 7 system. Ionic conductivity measurements were performed on these samples, which showed that the activation Energy (E a ) increases with increase in Dy 3+ mol% owing to the decreased mobility with increasing degree of disorder. The representative nquist Plots are given for Sm 2 Zr 2 O 7 . These materials have a definite band gap absorbing mainly in the UV region which makes them good candidates for photocatalysed dye degradation studies. Potential of some of these compositions as photocatalysts was also explored and they were found to efficiently catalyse the degradation of Xylenol Orange with t 1/2 decreasing from pure Sm 2 Zr 2 O 7 to pure Dy 2 Zr 2 O 7

Lifetime measurements of the excited states in {sup 145} Sm

Energy Technology Data Exchange (ETDEWEB)

El-Badry, A M; Abdel Samie, Sh; Ahmad, A A [Depatment of Physics, Faculty of Science, ElMinia University, ElMinia, (Egypt); Kuroyanagi, T; Odahara, A; Gono, Y; Morinobu, S [Tandem Accelerator Laboratory, Department of Physics, Kyushu University, (Japan)

1997-12-31

Lifetime of the excited levels in {sup 145} Sm has been measured through the {sup 139} La ({sup 10} B, 4 n){sup 145} Sm nuclear reaction. The optimal beam energy of 49 MeV was determined from the measurements of the excitation function and Cascade program. With the possibility of studying lifetime of this nucleus a conventional plunger system have been designed and constructed at kyushu University tandem accelerator laboratory. A La target of 0.22 mg/cm{sup 2} thickness which was evaporated onto a Au foil of 2 mg/cm{sup 2} thickness was used. Since the recoil velocity was estimated to be 1.76 mm/ns (beta 0.00585), the measurable time range resulted in the range from 5 Ps to 5 ns. The single spectra measurements were performed at the 20 plunger positions in the range from 10 {mu} to 10 mm. Analyses of the data were carried using hypermet and/or GF2 program to obtain the lifetimes. A new list of lifetimes for 12 excited states up to 3.922 MeV excitations for {sup 145} Sm were determined for the first time. Decay curves of the these transitions are discussed. The new lifetimes of excited states in {sup 145} Sm enabled us to understand the electromagnetic properties. The deduced transition probabilities were established and compared with that of N = 83 isotones and the closed shell nucleus {sup 144} Sm. In addition, a nuclear structure of {sup 145} Sm have been discussed and proposed in framework of the shell model. 4 figs., 1 tab.

Orange and reddish-orange light emitting phosphors: Sm{sup 3+} and Sm{sup 3+}/Eu{sup 3+} doped zinc phosphate glasses

Energy Technology Data Exchange (ETDEWEB)

Meza-Rocha, A.N., E-mail: ameza@fis.cinvestav.mx [Departamento de Física, Universidad Autónoma Metropolitana-Iztapalapa, P.O. Box 55-534, 09340 México D.F., México (Mexico); Speghini, A. [Dipartimento di Biotecnologie, Universita di Verona and INSTM, UdR Verona, Strada Le Grazie 15, I-37314 Verona (Italy); IFAC CNR, Nello Carrara Institute of Applied Physics, MDF Lab, I-50019 Sesto Fiorentino, FI (Italy); Bettinelli, M. [Dipartimento di Biotecnologie, Universita di Verona and INSTM, UdR Verona, Strada Le Grazie 15, I-37314 Verona (Italy); Caldiño, U. [Departamento de Física, Universidad Autónoma Metropolitana-Iztapalapa, P.O. Box 55-534, 09340 México D.F., México (Mexico)

2015-11-15

A spectroscopy study of Sm{sup 3+} and Sm{sup 3+}/Eu{sup 3+} doped zinc phosphate glasses is performed through photoluminescence spectra and decay time profile measurements. Under Sm{sup 3+} excitation at 344 nm, the Sm{sup 3+} singly doped glass shows an orange global emission with x=0.579 and y=0.414 CIE1931 chromaticity coordinates, whereas the Sm{sup 3+}/Eu{sup 3+} co-doped sample exhibits orange overall emissions (x=0.581 and y=0.398, and x=0.595 and y=0.387) and reddish-orange overall emission (x=0.634 and y=0.355) upon excitations at 344, 360 and 393 nm, respectively. Such luminescence from the co-doped sample is originated by the simultaneous emission of Sm{sup 3+} and Eu{sup 3+}. Under Sm{sup 3+} excitation at 344 and 360 nm, the Eu{sup 3+} emission is sensitized and enhanced by Sm{sup 3+} through a non-radiative energy transfer process. The non-radiative nature was inferred from the shortening of the Sm{sup 3+} lifetime observed in the Sm{sup 3+}/Eu{sup 3+} co-doped sample. An analysis of the Sm{sup 3+} emission decay time profiles using the Inokuti–Hirayama model suggests that an electric quadrupole–quadrupole interaction into Sm–Eu clusters might dominate the energy transfer process, with an efficiency of 0.17. - Highlights: • Zinc phosphate glasses are optically activated with Sm{sup 3+}/Eu{sup 3+} (ZPOSmEu). • Non-radiative energy transfer Sm{sup 3+}→Eu{sup 3+} takes place in ZPOSmEu. • ZPOSmEu overall emission can be modulated with the excitation wavelength. • ZPOSmEu might be useful as orange/reddish-orange phosphor for UV-white LEDs.

Optical properties of Sm3+ -doped TeO2sbnd WO3sbnd GeO2 glasses for solid state lasers

Science.gov (United States)

Subrahmanyam, T.; Gopal, K. Rama; Suvarna, R. Padma; Jamalaiah, B. Chinna; Rao, Ch Srinivasa

2018-03-01

Sm3+ -doped oxyfluoride tellurite-tungsten (TWGSm) glasses were prepared by conventional melt quenching method. The optical properties were investigated through photoluminescence excitation, emission and luminescence decay analysis. The optical band gap energy was determined as ∼3.425 eV for 1.0 mol% of Sm3+ -doped TWGSm glass. Upon 404 nm excitation, the TWGSm glasses emit luminescence through 4G5/2 → 6H5/2 (563 nm), 4G5/2 → 6H7/2 (600 nm), 4G5/2 → 6H9/2 (645 nm) and 4G5/2 → 6H11/2 (705 nm) transitions. The Judd-Ofelt analysis was performed using absorption spectrum and obtained radiative parameters were used to estimate the laser characteristics of present glasses. The concentration of Sm3+ has been optimized as 1.0 mol% for efficient luminescence. The luminescence decay of 4G5/2 emission level was studied by monitoring the emission and excitation wavelengths at 600 and 404 nm, respectively. The experimental lifetime of 4G5/2 level was decrease with increase of Sm3+ concentration. The 1.0 mol% of Sm3+ -doped TWGSm glass could be the best choice for solid state visible lasers to emit orange luminescence.

Molecular Characterization of the Schistosoma mansoni Zinc Finger Protein SmZF1 as a Transcription Factor

Science.gov (United States)

D'Astolfo, Diego S.; Cardoso, Fernanda C.; Rajão, Matheus A.; Mourão, Marina M.; Gava, Elisandra; Oliveira, Sérgio C.; Macedo, Andréa M.; Machado, Carlos R.; Pena, Sérgio D. J.; Kitten, Gregory T.; Franco, Glória R.

2009-01-01

Background During its development, the parasite Schistosoma mansoni is exposed to different environments and undergoes many morphological and physiological transformations as a result of profound changes in gene expression. Characterization of proteins involved in the regulation of these processes is of importance for the understanding of schistosome biology. Proteins containing zinc finger motifs usually participate in regulatory processes and are considered the major class of transcription factors in eukaryotes. It has already been shown, by EMSA (Eletrophoretic Mobility Shift Assay), that SmZF1, a S. mansoni zinc finger (ZF) protein, specifically binds both DNA and RNA oligonucleotides. This suggests that this protein might act as a transcription factor in the parasite. Methodology/Principal Findings In this study we extended the characterization of SmZF1 by determining its subcellular localization and by verifying its ability to regulate gene transcription. We performed immunohistochemistry assays using adult male and female worms, cercariae and schistosomula to analyze the distribution pattern of SmZF1 and verified that the protein is mainly detected in the cells nuclei of all tested life cycle stages except for adult female worms. Also, SmZF1 was heterologously expressed in mammalian COS-7 cells to produce the recombinant protein YFP-SmZF1, which was mainly detected in the nucleus of the cells by confocal microscopy and Western blot assays. To evaluate the ability of this protein to regulate gene transcription, cells expressing YFP-SmZF1 were tested in a luciferase reporter system. In this system, the luciferase gene is downstream of a minimal promoter, upstream of which a DNA region containing four copies of the SmZF1 putative best binding site (D1-3DNA) was inserted. SmZF1 increased the reporter gene transcription by two fold (p≤0.003) only when its specific binding site was present. Conclusion Taken together, these results strongly support the hypothesis

Synthesis and characterization of Ce{sub 1-x}SmXO{sub 2-(x/2)} as solid electrolyte for application in IT-SOFCs; Sintese e caracterizacao de Ce{sub 1-x}SmXO{sub 2-(x/2)} como eletrolito solido para aplicacao em IT-SOFCs

Energy Technology Data Exchange (ETDEWEB)

Nicodemo, J.P.; Martinelli, A.E.; Nascimento, R.M. [Universidade Federal do Rio Grande do Norte (DECM/UFRN), Natal, RN (Brazil). Dept. de Engenharia de Materiais], e-mail: juli_pivotto@yahoo.com.br; Melo, D.M.A. [Universidade Federal do Rio Grande do Norte (DQ/UFRN), Natal, RN (Brazil). Dept. de Quimica; Cela, B. [Universidade Federal do Rio Grande do Norte (PPGCEM/UFRN), Natal, RN (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais; Macedo, D.A. [Universidade Federal do Rio Grande do Norte (PPGEM/UFRN), Natal, RN (Brazil). Programa de Pos-Graduacao em Engenharia Mecanica

2008-07-01

Mixed rare earth doped CeO{sub 2} oxide-based have been extensively studied for use in solid electrolytes for fuel cells. Ceramics-based CeO{sub 2} have high ionic conductivity and enable the operation of solid oxide fuel cells (SOFCs) in intermediate temperatures, in the range of 500 to 750 deg C. In this work, was investigated the Sm{sub 2}O{sub 3} doped CeO{sub 2} by Pechini method to obtain Ce{sub 0,9}Sm{sub 0,1}O{sub 1,95}. The resulting powders were characterized by the chemical composition (EDS) and crystallographic (XRD), thermal analysis (TG/ATD and DTG), and particles morphology (SEM). After calcinations of 500 and 700 deg C for 2 hours were obtained nanosized powders with crystalline structure of cubic phase type fluorite fully formed. (author)

Sm isotope composition and Sm/Eu ratio determination in an irradiated 153Eu sample by ion exchange chromatography-quadrupole inductively coupled plasma mass spectrometry combined with double spike isotope dilution technique

International Nuclear Information System (INIS)

Bourgeois, M.; Isnard, H.; Gourgiotis, A.; Stadelmann, G.; Gautier, C.; Mialle, S.; Nonell, A.; Chartier, F.

2011-01-01

Within the framework of the research undertaken by the French Atomic Energy Commission on transmutation of long-lived radionuclides, targets of highly enriched actinides and fission products were irradiated in the fast neutron reactor Phenix. Precise and accurate measurements of the isotopic and elemental composition of the enriched elements are therefore required. In order to obtain the uncertainties of several per mil and to reduce handling time and exposure to analyst on radioactive material, the on-line coupling of ion exchange chromatography with quadrupole inductively coupled plasma mass spectrometry has been associated with the technique of the double spike isotope dilution. We present in this paper the results obtained on an irradiated sample of Europium oxide powder (enriched at 99.13% in 153 Eu). After irradiation of around 5 mg of Eu 2 O 3 powder the theoretical calculations predict the formation of several micrograms of gadolinium and samarium isotopes. In relation to the very high activity of the sample after irradiation and the very low quantity of Sm formed, the on-line ion exchange chromatography separation of Gd, Sm and Eu before Sm isotope ratio measurements has been developed for the quantification of the 152 Sm/ 153 Eu ratio. These on-line measurements were associated with the double spike isotope dilution technique after calibration of a 147 Sm/ 151 Eu spike solution. The external reproducibility of Sm isotopic ratios was determined to be around 0.5% (2 σ) resulting in a final uncertainty on the 152 Sm/ 153 Eu ratio of around 1% (2 σ). These on-line measurements present therefore a robust and high-throughput alternative to the thermal-ionisation mass spectrometry technique used so far in combination with off-line chromatographic separation, particularly in nuclear applications where characterisation of high activity sample solutions is required. (authors)

Phase formation and crystallization behavior of melt spun Sm-Fe-based alloys

International Nuclear Information System (INIS)

Shield, J.E.

1999-01-01

The phase formation and microstructures of Sm-Fe alloys have been investigated at Sm levels of 11 and 17 atomic percent and with alloying additions of Ti and C. At lower Sm content, virtually phase pure SmFe 7 formed, while higher Sm content resulted in the formation of SmFe 7 , SmFe 2 and amorphous phases. The addition of Ti and C resulted in greater stability and a larger volume fraction of the amorphous phase. The binary Sm-Fe alloys at both Sm levels had tremendously variable microstructures, with large discrepancies in grain size and phase distribution from region to region. The addition of Ti and C tended to result in a more homogeneous microstructure, as well as a refinement in the microstructural scale. (orig.)

Study of fuel element characteristic of SM and SMP (SM-PRIMA) fuel assemblies

International Nuclear Information System (INIS)

Klinov, A.V.; Kuprienko, V.A.; Lebedev, V.A.; Makhin, V.M.; Tuchnin, L.M.; Tsykanov, V.A.

1999-01-01

The paper discusses the techniques and results of reactor tests and post-reactor investigations of the SM reactor fuel elements and fuel elements developed in the process of designing the specialized PRIMA test reactor with the SM reactor fuel elements used as a prototype and which are referred to as the SMP fuel elements. The behavior of fuel elements under normal operating conditions and under deviation from normal operating conditions was studied to verify the calculation techniques, to check the calculation results during preparation of the SM reactor safety substantiation report and to estimate the possibility of using such fuel elements in other projects. During tests of fuel rods under deviation from normal operating conditions their advantages were shown over fuel elements, the components of which were produced using the Al-based alloys. (author)

Efficacy of synovectomy in haemophilic patients with 153Sm-Hydroxyapatite

International Nuclear Information System (INIS)

Calegaro, J.U.M; Paula, J.C; Machado, J; Cruz, J.S

2006-01-01

Introduction - We preconized the use of 153 Sm-Hydroxyapatite (HYP) in the synoviorthesis of haemophilic patients (pts) by physical, chemical and biological characteristics. The real efficacy is being confirmed by the actual experience over the previous results. These are the first results with 153 Sm-HYP in our literature review. Material and Methods - Fifteen pts. were treated, all males, with ages between 15 and 31 years (average = 22,8 years old), with an intraarticular injection of 185 MBq (5mCi) of 153 Sm-HYP, totalizing 29 joints: 12 knees, 11 elbows, 4 ankles and 2 shoulders. The 153 Sm, produced by IPEN/CNEN - Sao Paulo, targeted hydroxyapatite particles with a diameter between 1-10μm, radiochemical purity superior to 95% and stability of 96,6% 1440min after the labeling process. The intraarticular punction was made after local antiseptic, aspirating synovial fluid, injecting 0,5 ml of radioactive solution and flushing the tract with a saline with a total volume no greater than 1,5 ml. The images were obtained 2 and 24h after injection in all pts in a large field of view gamma-camera. The clinical evaluation was made before and one year after it, using objective (range of motion, joint tenderness, degree of joint effusion) and subjective criteria (joint pain by visual scale and joint aspect). The response were graded: 1 - Excellent (E); 2 - Good (G); 3 - Mild (M); 4 - Bad (B); 5 - Worse (W). The reduction in clotting factor use and heamarthroses were others aspects evaluated. Results - The scintigrafies showed homogeneous distribution of the material in joints (2h) and no articular scape (24h). The was a reduction of 34% in the clotting factor use and of 51,4% in haemarthroses including the poor responses in knees. The results by patients were: 53,3% E, 20% G, 13,3% M, 13,3% B, 0% W and by joints were 47,75 with excellent and good responses and 84,75% when included the mild group. There was no patient without response. Few patients (4) had local pain in

Thermal decomposition of the Fe17 Sm2 N3 phase

International Nuclear Information System (INIS)

Cabral, F.A.O.; Gama, S.; Morais, E. de; Sanjurjo, N.L.; Ribeiro, C.A.

1996-01-01

We studied the high temperature decomposition mechanism for the Fe 17 Sm 2 N 3 phase using several different experimental techniques, as thermomagnetic and thermogravimetric analyses. Our results slow that the decomposition occurs in a two step scheme. In the first reaction we have the formation of Sm N and a solid solution of nitrogen in iron. In the second step, this solid solution degases, and we observe the evolution of nitrogen over a broad temperature range. (author)

Photoluminescence characteristics of Sm{sup 3+}-doped Ba{sub 2}CaWO{sub 6} as new orange–red emitting phosphors

Energy Technology Data Exchange (ETDEWEB)

Yu, Ruiijn [College of Science, Northwest A and F University, Yangling, Shaanxi 712100 (China); Department of Physics, Pukyong National University, Busan 608-737 (Korea, Republic of); Department of Physics, Changwon National University, Changwon 641-773 (Korea, Republic of); Mi Noh, Hyeon; Kee Moon, Byung; Chun Choi, Byung [Department of Physics, Pukyong National University, Busan 608-737 (Korea, Republic of); Hyun Jeong, Jung, E-mail: jhjeong@pknu.ac.kr [Department of Physics, Pukyong National University, Busan 608-737 (Korea, Republic of); Sueb Lee, Ho [Department of Physics, Changwon National University, Changwon 641-773 (Korea, Republic of); Jang, Kiwan, E-mail: kwjang@changwon.ac.kr [Department of Physics, Changwon National University, Changwon 641-773 (Korea, Republic of); Soo Yi, Soung [Department of Electronic Material Engineering, Silla University, Busan 617-736 (Korea, Republic of)

2014-08-01

The orange–red emitting Ba{sub 2}CaWO{sub 6}:xSm{sup 3+} (0.01≤x≤0.25) phosphors were synthesized via solid state reaction process. The crystal structure of the phosphor was characterized by XRD. The photoluminescence excitation and emission spectra, concentration effect were investigated. The results show an efficient energy transfer from WO{sub 6}{sup 6−} group to Sm{sup 3+} occurs. The emission spectra of the Ba{sub 2}CaWO{sub 6}:Sm{sup 3+} phosphors consisted of some sharp emission peaks of Sm{sup 3+} ions centre at 579 nm, 618 nm, 625 nm, and 675 nm. The strongest one is located at 610 nm due to {sup 4}G{sub 5/2}→{sup 6}H{sub 7/2} transition of Sm{sup 3+}, generating bright orange–red light. The optimum dopant concentration of Sm{sup 3+} ions in Ba{sub 2}CaWO{sub 6}:xSm{sup 3+} is around 5 mol% and the critical transfer distance of Sm{sup 3+} is calculated as 18 Å. The fluorescence lifetime of Sm{sup 3+} in Ba{sub 2}CaWO{sub 6}:0.05Sm{sup 3+} is 2.36 ms. The Ba{sub 2}CaWO{sub 6}:Sm{sup 3+} phosphors may be potentially used as orange–red phosphors for white light-emitting diodes. - Highlights: • A new host-sensitized Sm{sup 3+}-doped Ba{sub 2}CaWO{sub 6} phosphor was firstly synthesized. • Its structure, luminescent properties are well studied and characterized. • There exists an efficient energy transfer from WO{sub 6}{sup 6−} group to Sm{sup 3+}. • The thermal quenching properties of Ba{sub 2}CaWO{sub 6}:Sm{sup 3+} was firstly evaluated.

Integration plan required by performance agreement SM 7.2.1

International Nuclear Information System (INIS)

Diediker, L.P.

1997-01-01

to complete the requirements specified in the Performance Expectation 7.2.1, within the SM7 Environmental, Safety, and Health section of the Project Hanford Management Contract

Sm{sub 0.5}Sr{sub 0.5}CoO{sub 3}+Sm{sub 0.2}Ce{sub 0.8}O{sub 1.9} composite cathode for cermet supported thin Sm{sub 0.2}Ce{sub 0.8}O{sub 1.9} electrolyte SOFC operating below 600{sup o}C

Energy Technology Data Exchange (ETDEWEB)

Zhang, Xinge; Robertson, Mark; Yick, Sing; Deces-Petit, Cyrille; Styles, Edward; Qu, Wei; Xie, Yongsong; Hui, Rob; Roller, Justin; Kesler, Olivera; Maric, Radenka; Ghosh, Dave [Institute for Fuel Cell Innovation, National Research Council Canada, 3250 East Mall, Vancouver, BC (Canada V6T 1W5)

2006-10-06

The cathode is a key component in low temperature solid oxide fuel cells. In this study, composite cathode, 75wt.% Sm{sub 0.5}Sr{sub 0.5}CoO{sub 3} (SSC)+25wt.% Sm{sub 0.2}Ce{sub 0.8}O{sub 1.9} (SDC), was applied on the cermet supported thin SDC electrolyte cell which was fabricated by tape casting, screen-printing, and co-firing. Single cells with the composite cathodes sintered at different temperatures were tested from 400 to 650{sup o}C. The best cell performance, 0.75Wcm{sup -2} peak power operating at 600{sup o}C, was obtained from the 1050{sup o}C sintered cathode. The measured thin SDC electrolyte resistance R{sub s} was 0.128{omega}cm{sup 2} and total electrode polarization R{sub p}(a+c) was only 0.102{omega}cm{sup 2} at 600{sup o}C. (author)

High field magnetization process of (Sm, Nd)2Fe17Ny compounds

International Nuclear Information System (INIS)

Yu, M.J.; Tang, N.; Liu, Y.L.; Tegus, O.; Lu, Y.; Kuang, J.P.; Yang, F.M.; Li, X.; Zhou, G.F.; Boer, F.R. de

1992-01-01

The crystal structure and high-field magnetization process of (Sm 1-x Nd x ) 2 Fe 17 N y compounds (x = 0.0, 0.1, ..., 1.0, 2 1-x Nd x ) 2 Fe 17 N y compounds were found to crystallize in the rhombohedral Th 2 Zn 17 structure. As x increases, the Curie temperature decreases. The anisotropy fields and easy magnetization direction were investigated from 1.5 K to room temperature by means of high-field magnetization measurements and AC-susceptibility measurements, combined with X-ray diffraction on random and magnetically aligned powder samples. The anisotropy field decreases with increasing x and approaches a minimum value at about x = 0.6, then increases again. A tentative spin phase diagram for the (Sm 1-x Nd x ) 2 Fe 17 N y series is presented. At room temperature, the easy magnetization direction remains along the c-axis up to x = 0.6. (orig.)

An alternative gas sensor material: Synthesis and electrical characterization of SmCoO3

International Nuclear Information System (INIS)

Michel, Carlos Rafael; Delgado, Emilio; Santillan, Gloria; Martinez, Alma H.; Chavez-Chavez, Arturo

2007-01-01

Single-phase perovskite SmCoO 3 was prepared by a wet-chemical synthesis technique using metal-nitrates and citric acid; after its characterization by thermal analyses and X-ray diffraction, sintering at 900 deg. C in air, gave single phase and well crystallized powders. The powders were mixed with an organic solvent to prepare a slurry, which was deposited on alumina substrates as thick films, using the screen-printing technique. Electrical and gas sensing properties of sintered SmCoO 3 films were investigated in air, O 2 and CO 2 , the results show that sensitivity reached a maximum value at 420 deg. C, for both gases. Dynamic tests revealed a better behavior of SmCoO 3 in CO 2 than O 2 , due to a fast response and a larger electrical resistance change to this gas. X-ray diffraction made on powders after electrical characterization in gases, showed that perovskite-type structure was preserved

Crystallographic characterization of divalent organosamarium compound (C5H5)2Sm(THF)2

International Nuclear Information System (INIS)

Jagannatha Swamy, S.

2002-01-01

The single pot reaction between SmX 2 (X = Cl - , I - ) and BuLi in THF at -40 degC, followed by the addition of C 5 H 5 - Na + results in a dark red solution. Leaving the concentrated reaction mixture at -25 degC for two days in a deep freezer results in the formation of the crystals of the compound, (C 5 H 5 ) 2 ; Sm(THF) 2 . The compound is insoluble in any solvent and it has been characterized by conventional methods. The crystals are monoclinic with space group C2/c, and a = 13.416(1), b = 9.644(1), c = 14.129(2) pm, β109.873(9) 0 and z = 4 for ρcalcd = 1.64 g cm -3 . Least squares refinement on the basis of 1804 observed reflections has led to a final R value of 0.037 and R w = 0.054. (author)

Kampen om det sibiriske smør

DEFF Research Database (Denmark)

Larsen, Inge Marie

2001-01-01

Afhandlingen følger opbygningen af og udviklingen i den vestsibiriske smørsektor og den internationale handel med sibirisk smør. Hvordan gik det til, at Rusland blev verdens næststørste smøreksportør? Indfaldsvinkelen er lokal sibirisk, national russisk og global, idet danske og engelske firmaers...

Crystal structures of orthorhombic, hexagonal, and cubic compounds of the Sm(x)Yb(2−x)TiO5 series

International Nuclear Information System (INIS)

Aughterson, Robert D.; Lumpkin, Gregory R.; Reyes, Massey de los; Sharma, Neeraj; Ling, Christopher D.; Gault, Baptiste; Smith, Katherine L.; Avdeev, Maxim; Cairney, Julie M.

2014-01-01

A series of single phase compounds with nominal stoichiometry Sm (x) Yb (2−x) TiO 5 (x=2, 1.4, 1, 0.6, and 0) have been successfully fabricated to generate a range of crystal structures covering the most common polymorphs previously discovered in the Ln 2 TiO 5 series (Ln=lanthanides and yttrium). Four of the five samples have not been previously fabricated in bulk, single phase form so their crystal structures are refined and detailed using powder synchrotron and single crystal x-ray diffraction, neutron diffraction and transmission electron microscopy. Based on the phase information from diffraction data, there are four crystal structure types in this series; orthorhombic Pnma, hexagonal P6 3 /mmc, cubic (pyrochlore-like) Fd-3m and cubic (fluorite-like) Fm-3m. The cubic materials show modulated structures with variation between long and short range ordering and the variety of diffraction techniques were used to describe these complex crystal structure types. - Graphical abstract: A high resolution image of the compound Sm 0.6 Yb 1.4 TiO 5 showing contrast from lattice fringes and the corresponding fast Fourier transform (FFT) of the HREM image with pyrochlore related diffraction spots marked “P” and fluorite marked “F”. The crystal is oriented down the [1 1 0] zone axis based on the Fd-3m structure. The ideal crystal structure (no vacancies) of the cubic, pyrochlore-like (Sm 0.6 Yb 1.4 TiO 5 ). - Highlights: • First fabrication of bulk single-phase material with stoichiometry Sm 2 TiO 5 . • Systematic study of crystal structure types within Ln 2 TiO 5 series (Ln=lanthanides). • A novel technique using IFFT of HREM images to study cubic structures

Physicochemical investigation of Bi2MoO6 solid-phase interaction with Sm2MoO6

International Nuclear Information System (INIS)

Khajkina, E.G.; Kovba, L.M.; Bazarova, Zh.G.; Khal'baeva, K.M.; Khakhinov, V.V.; Mokhosoev, M.V.

1986-01-01

Bi 2 MoO 6 -Sm 2 MoO 6 interaction in the temperature range of 700-1000 deg C is studied using X-ray phase analysis and vibrational spectroscopy. Formation of monoclinic solid solutions based on γ'-Bi 2 MoO 6 and B 2-x Sm x MoO 6 varied composition phase with α-Ln 2 MoO 6 structure which homogeneity region extent at 1000 deg C constitutes ∼ 50 mol % (0.7≤x≤1.7) is stated. Crystallographic characteristics of the synthesized phases are determined

Photoluminescent properties of LiSrxBa1-xPO4:RE3+ (RE = Sm3+, Eu3+) f-f transition phosphors

International Nuclear Information System (INIS)

Tu Dong; Liang Yujun; Liu Rong; Cheng Zheng; Yang Fan; Yang Wenlong

2011-01-01

Highlights: → Novel phosphors LiSr x Ba 1-x PO 4 : Sm 3+ and LiSr x Ba 1-x PO 4 : Eu 3+ have been synthesized by solid-state reaction method. → The LiSr x Ba 1-x PO 4 : Sm 3+ and LiSr x Ba 1-x PO 4 : Eu 3+ phosphors may be potential f-f transition phosphors used in LED. → The emission intensity of the LiSr x Ba 1-x PO 4 : Sm 3+ and LiSr x Ba 1-x PO 4 : Eu 3+ phosphors can be enhanced by increasing the value of x. - Abstract: Rare-earth ions (Sm 3+ or Eu 3+ ) doped LiSr x Ba 1-x PO 4 (x = 0, 0.2, 0.4, 0.6, 0.8, 1.0) f-f transition phosphor powders were prepared by a high temperature solid-state reaction. The resulted phosphors were characterized by X-ray diffraction (XRD) and photoluminescence (PL) spectroscopy. The results of XRD indicate that the phase structure of the sample changes from LiBaPO 4 to LiSrPO 4 when x changes from 0 to 1.0. The excitation spectra indicate that only direct excitation of rare earth ions (Sm 3+ or Eu 3+ ) can be observed. The doped rare earth ions show their characteristic emission in LiSr x Ba 1-x PO 4 , i.e., Eu 3+5 D 0 - 7 F J (J = 0, 1, 2, 3, 4), Sm 3+4 G 5/2 → 6 H J (J = 5/2, 7/2, 9/2, 11/2), respectively. The dependence of the emission intensities of the LiSr x Ba 1-x PO 4 :Sm 3+ and LiSr x Ba 1-x PO 4 :Eu 3+ phosphors on the x value and Ln 3+ (Ln 3+ = Sm 3+ , Eu 3+ ) concentration is also investigated.

Recycled Sm-Co bonded magnet filaments for 3D printing of magnets

Science.gov (United States)

Khazdozian, Helena A.; Manzano, J. Sebastián; Gandha, Kinjal; Slowing, Igor I.; Nlebedim, Ikenna C.

2018-05-01

Recycling of rare earth elements, such as Sm and Nd, is one technique towards mitigating long-term supply and cost concerns for materials and devices that depend on these elements. In this work recycled Sm-Co powder recovered from industrial grinding swarfs, or waste material from magnet processing, was investigated for use in preparation of filament for 3D printing of bonded magnets. Recycled Sm-Co powder recovered from swarfs was blended into polylactic acid (PLA). Up to 20 vol.% of the recycled Sm-Co in PLA was extruded at 160°C to produce a filament. It was demonstrated that no degradation of magnetic properties occurred due to the preparation or extrusion of the bonded magnet material. Good uniformity of the magnetic properties is exhibited throughout the filament, with the material first extruded being the exception. The material does exhibit some magnetic anisotropy, allowing for the possibility of the development of anisotropic filaments. This work provides a path forward for producing recycled magnetic filament for 3D printing of permanent magnets.

The Neutronic Effect of Zr-rod and Sm2O3-disk in the Model of Kartini Reactor Fuel Element

International Nuclear Information System (INIS)

Edi-Trijono-Budisantoso; Bambang-Sumarsono; Tri-Wulan-Tjiptono

2000-01-01

The model of Kartini fuel element has been constructed using a variationof materials in it fuels. For basic model, the construction of fuel assemblyis a rod type fuel element with SS-304 cladding and UZrH (8.5 % wt U in 20 %enrichment) as a fuel meat and graphite reflector at the both ends of fuelmeat. By using is basic construction, the material then varied in 4 models asthe following: 1) The model with the Zr-rod in 5.76 mm diameter, is insertedat the axis of fuel meat; 2) The model with Sm 2 O 3 -disk in 1.28 mmthickness, is inserted at the both ends of fuel meat; 3) The compound ofmodel 1 and model 2; 4) The basic construction of cell without Zr-rod andSm 2 O 3 -disk. The neutronic-behavior of each model then calculated usingWIMSD4 and the result then represented as a graphics form of the correlationof parameters as the following: 1) The correlation between model and itneutron multiplication factor; 2) The comparison of neutron flux distributionfor each model. By the graphic can be concluded, that Zr-rod in the fuelelement can reduce power peaking factor to 82 % with the effect of neutronmultiplication factor reduced to 98 %, while the insertion of Sm 2 O 3 -disk atthe both ends of fuel meat can make neutron multiplication factor reduce to97 % but unfortunately the neutron peaking factor increase to 101 %. Theinsertion of Zr-rod in the axis of fuel meat, increase the safety margin offuel utilization, while the insertion of Sm 2 O 3 -disk at the both ends offuel meat can make it as the burn-able poison that maintain the neutronmultiplication factor stable for a long time utilization. (author)

Optical spectroscopy of Sm(3+) doped Na2O-ZnO-La2O3-TeO2 glasses.

Science.gov (United States)

Sobczyk, Marcin

2015-10-05

Telluride glasses with the composition xSm2O3-(7-x)La2O3-3Na2O-25ZnO-65TeO2 (where x=0.1, 1, 2, 5 and 7 mol%) were obtained by the melt quenching technique. Electronic absorption and fluorescence spectra as well as fluorescence dynamics of the Sm(3+)-doped title glasses are presented and analysed in detail. A Judd-Ofelt intensity analysis of the absorption spectrum at 300 K has been applied for determination of Ωλ parameters (Ω2=3.10, Ω4=3.80, Ω6=1.61×10(-20) cm(2)) which in turn have been used for calculations of the radiative transition probabilities (AT), the natural (radiative) lifetimes (τR) of the (4)G5/2 level of Sm(3+), the fluorescence branching ratios (β) and the emission cross-sections (σem). The τR value of the (4)G5/2 level amount to 1546 μs and is slightly higher than the measured decay time of 1306 μs. With the increasing of Sm2O3 concentration from 0.1 to 7.0 mol% the experimental lifetime of the fluorescent level decreases from 1306 to 41 μs. An analysis of the non-radiative decay was based on the cross-relaxation mechanisms. The optical achieved results indicate that the investigated glasses are potentially applicable as an orange and/or red laser host. Copyright © 2015 Elsevier B.V. All rights reserved.

Solid-solid synthesis and structural phase transition process of SmF3

Science.gov (United States)

Yan, Qi-Cao; Guo, Xing-Min

2018-04-01

Mazes of contradictory conclusions have been obtained by previous researches about structural phase transition process of SmF3. In this paper, the single crystals of SmF3 (hexagonal and orthorhombic) were prepared by solid-solid synthesis, which have shown gradual changes in crystal growth modes with the increase temperature and holding time. Furthermore, we propose the phase transition process of in SmF3. Hexagonal symmetry of SmF3 (space group Pnma) was prepared firstly by heating Sm2O3 and NH4HF2 over 40 min at 270 °C. And then orthorhombic symmetry of SmF3 (space group P63mc) was obtained by heating hexagonal symmetry over 10 h at 650 °C. The reaction of SmF3 (hexagonal) = SmF3 (orthorhombic) is extremely sluggish at a low temperature (less than 650 °C), which was seen as a Mixed Grown Region.

Luminescence properties of NaY(WO{sub 4}){sub 2}:Sm{sup 3+}, Eu{sup 3+} phosphors prepared by molten salt method

Energy Technology Data Exchange (ETDEWEB)

Liu, Ting; Meng, Qingyu, E-mail: qingyumeng163@163.com; Sun, Wenjun

2016-02-15

Sm{sup 3+} singly doped NaY(WO{sub 4}){sub 2} and Sm{sup 3+}, Eu{sup 3+} co-doped NaY(WO{sub 4}){sub 2} phosphors have been synthesized by molten salt method. The crystal structure and morphology were characterized by means of X-ray powder diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). In Sm{sup 3+} singly doped NaY(WO{sub 4}){sub 2} phosphors, the suitable doping concentration was proved. In Sm{sup 3+}, Eu{sup 3+} co-doped NaY(WO{sub 4}){sub 2} phosphors, the energy transfer from Sm{sup 3+} to Eu{sup 3+} is confirmed by the luminescent spectra. A strong absorption line at 405 nm can be generated from {sup 6}H{sub 5/2}-{sup 4}K{sub 11/2} ({sup 4}F{sub 7/2}) transition of Sm{sup 3+} in Sm{sup 3+}, Eu{sup 3+} co-doped NaY(WO{sub 4}){sub 2} phosphors, which is suitable for the emission of the near-ultraviolet light-emitting diodes. The energy transfer efficiency, energy transfer rate and average distance between Sm{sup 3+} and Eu{sup 3+} in the NaY(WO{sub 4}){sub 2}:Sm{sup 3+}, Eu{sup 3+} phosphors have been calculated based on the fluorescent dynamic analysis. Finally, the energy transfer mechanism between Sm{sup 3+} and Eu{sup 3+} is confirmed, the energy transfer occurs between {sup 4}G{sub 5/2} state of Sm{sup 3+} ions and {sup 5}D{sub 0} state rather than {sup 5}D{sub 1} state of Eu{sup 3+} ions.

Site populations analysis of the Sm2(Co,Fe)17 alloys using Moessbauer spectroscopy

International Nuclear Information System (INIS)

Nagamine, L.C.C.M.

1990-01-01

Moessbauer measurements were carried out at room temperature for Sm 2 (Co 1-x Fe x ) 17 alloys with x=0,1 to 0,6 and Sm 2 (Co 0.9-v Fe v Cu 0.08 Zr 0.02 ) 8.35 , with v=0.23 to 0.27. All samples were characterized by x-ray diffraction. They showed rhombohedral structure of Th 2 Zn 17 type (R 3-bar m), where Fe atoms occupy four crystallographic sites. All spectra showed magnetic splitting and a high complexity resulting from the superposition of four Fe sites. Hyperfine parameters and site populations were obtained by least-squares fitting of the spectra. (author)

Studies concerning the preparation of the 153Sm complex with EDTMP (ethylenediaminetetra methylenephosphonic acid) and other 153Sm complexes with other phosphonates, at room temperature

International Nuclear Information System (INIS)

Gasiglia, Haroldo Taurian

2000-01-01

This work presents a study on the preparation of the complexes 1 53S m - EDTMP, 153 Sm - HEDP, 153 Sm - NTMP, 153 Sm - DTPMP and 153 Sm - HDTMP at room temperature. The preparation of the complex 153 Sm - HDTMP, under heating (70 - 72 deg C), was also studied. Several factors affecting the 153 Sm - EDTMP complexing yields were studied, due to its importance for use in Nuclear Medicine. These factors were: the molar ratio [ligand] / [metal], the ligand concentration and the incubation time of the mixture ligand-metal. The preparation of this complex, in low molar ratios, was also investigated. A study of the 153 Sm - EDTMP concerning the 'in vitro' stability, when this complex was prepared in low radioactive concentrations was performed. A study on the temperature influence on its degradation, when this complex was obtained in higher radioactive concentrations, was also performed. The preparation of the complexes 153 Sm - HEDP, 153 Sm - NTMP, 153 Sm - DTPMP and 153 Sm - HDTMP was investigated by preparing the complexes in two situations: high molar ratio and ligand concentration and low molar ratio and ligand concentration. The 'in vitro' stability of each complex, obtained in low radioactive concentration was studied. In the specific case of the complex 153 Sm - HDTMP, its biological distribution in mice was performed. All the complexes were investigated by high performance liquid chromatography (HPLC) and its complexing yields were determined by other three chromatographic processes: ionic exchange, thin layer chromatography (TLC - SG) and paper chromatography. The chromatographic processes were performed by association with specific radiochemical techniques. This work also presents a comparative study on the chromatograms obtained by thin layer chromatography (TLC - SG) and paper chromatography, when evaluated by the technique of cutting the strips into pieces and the chromatograms performed directly on a radiochromatography. The shape of the chromatograms and R

Germinal Center Kinases SmKIN3 and SmKIN24 Are Associated with the Sordaria macrospora Striatin-Interacting Phosphatase and Kinase (STRIPAK) Complex.

Science.gov (United States)

Frey, Stefan; Reschka, Eva J; Pöggeler, Stefanie

2015-01-01

The striatin-interacting phosphatase and kinase (STRIPAK) complex is composed of striatin, protein phosphatase PP2A and protein kinases that regulate development in animals and fungi. In the filamentous ascomycete Sordaria macrospora, it is required for fruiting-body development and cell fusion. Here, we report on the presence and function of STRIPAK-associated kinases in ascomycetes. Using the mammalian germinal center kinases (GCKs) MST4, STK24, STK25 and MINK1 as query, we identified the two putative homologs SmKIN3 and SmKIN24 in S. macrospora. A BLASTP search revealed that both kinases are conserved among filamentous ascomycetes. The physical interaction of the striatin homolog PRO11 with SmKIN3 and SmKIN24 were verified by yeast two-hybrid (Y2H) interaction studies and for SmKIN3 by co-Immunoprecipitation (co-IP). In vivo localization found that both kinases were present at the septa and deletion of both Smkin3 and Smkin24 led to abnormal septum distribution. While deletion of Smkin3 caused larger distances between adjacent septa and increased aerial hyphae, deletion of Smkin24 led to closer spacing of septa and to sterility. Although phenotypically distinct, both kinases appear to function independently because the double-knockout strain ΔSmkin3/ΔSmkin24 displayed the combined phenotypes of each single-deletion strain.

Germinal Center Kinases SmKIN3 and SmKIN24 Are Associated with the Sordaria macrospora Striatin-Interacting Phosphatase and Kinase (STRIPAK Complex.

Directory of Open Access Journals (Sweden)

Stefan Frey

Full Text Available The striatin-interacting phosphatase and kinase (STRIPAK complex is composed of striatin, protein phosphatase PP2A and protein kinases that regulate development in animals and fungi. In the filamentous ascomycete Sordaria macrospora, it is required for fruiting-body development and cell fusion. Here, we report on the presence and function of STRIPAK-associated kinases in ascomycetes. Using the mammalian germinal center kinases (GCKs MST4, STK24, STK25 and MINK1 as query, we identified the two putative homologs SmKIN3 and SmKIN24 in S. macrospora. A BLASTP search revealed that both kinases are conserved among filamentous ascomycetes. The physical interaction of the striatin homolog PRO11 with SmKIN3 and SmKIN24 were verified by yeast two-hybrid (Y2H interaction studies and for SmKIN3 by co-Immunoprecipitation (co-IP. In vivo localization found that both kinases were present at the septa and deletion of both Smkin3 and Smkin24 led to abnormal septum distribution. While deletion of Smkin3 caused larger distances between adjacent septa and increased aerial hyphae, deletion of Smkin24 led to closer spacing of septa and to sterility. Although phenotypically distinct, both kinases appear to function independently because the double-knockout strain ΔSmkin3/ΔSmkin24 displayed the combined phenotypes of each single-deletion strain.

SmD1 Modulates the miRNA Pathway Independently of Its Pre-mRNA Splicing Function.

Directory of Open Access Journals (Sweden)

Xiao-Peng Xiong

2015-08-01

Full Text Available microRNAs (miRNAs are a class of endogenous regulatory RNAs that play a key role in myriad biological processes. Upon transcription, primary miRNA transcripts are sequentially processed by Drosha and Dicer ribonucleases into ~22-24 nt miRNAs. Subsequently, miRNAs are incorporated into the RNA-induced silencing complexes (RISCs that contain Argonaute (AGO family proteins and guide RISC to target RNAs via complementary base pairing, leading to post-transcriptional gene silencing by a combination of translation inhibition and mRNA destabilization. Select pre-mRNA splicing factors have been implicated in small RNA-mediated gene silencing pathways in fission yeast, worms, flies and mammals, but the underlying molecular mechanisms are not well understood. Here, we show that SmD1, a core component of the Drosophila small nuclear ribonucleoprotein particle (snRNP implicated in splicing, is required for miRNA biogenesis and function. SmD1 interacts with both the microprocessor component Pasha and pri-miRNAs, and is indispensable for optimal miRNA biogenesis. Depletion of SmD1 impairs the assembly and function of the miRISC without significantly affecting the expression of major canonical miRNA pathway components. Moreover, SmD1 physically and functionally associates with components of the miRISC, including AGO1 and GW182. Notably, miRNA defects resulting from SmD1 silencing can be uncoupled from defects in pre-mRNA splicing, and the miRNA and splicing machineries are physically and functionally distinct entities. Finally, photoactivatable-ribonucleoside-enhanced crosslinking and immunoprecipitation (PAR-CLIP analysis identifies numerous SmD1-binding events across the transcriptome and reveals direct SmD1-miRNA interactions. Our study suggests that SmD1 plays a direct role in miRNA-mediated gene silencing independently of its pre-mRNA splicing activity and indicates that the dual roles of splicing factors in post-transcriptional gene regulation may be

Anti-skin-aging benefits of exopolymers from Aureobasidium pullulans SM2001.

Science.gov (United States)

Kim, Kyung Hu; Park, Soo Jin; Lee, Ji Eun; Lee, Young Joon; Song, Chang Hyun; Choi, Seong Hun; Ku, Sae Kwang; Kang, Su Jin

2014-01-01

There have been many attempts to search for affordable and effective functional cosmetic ingredients, especially from natural sources. As research into developing a functional cosmetic ingredient, we investigated whether exopolymers from Aureobasidium pullulans SM2001 (E-AP-SM2001) exert antioxidant, antiwrinkle, whitening, and skin moisturizing effects. Antioxidant effects of E-AP-SM2001 were determined by measuring free radical scavenging capacity and superoxide dismutase (SOD)-like activity. Antiwrinkle effects were assessed through the inhibition of hyaluronidase, elastase, collagenase, and matrix metalloproteinase (MMP)-1. Whitening effects were measured by tyrosinase inhibition assay, and by melanin formation test in B16/F10 melanoma cells. Skin moisturizing effects were detected by mouse skin water content test. E-AP-SM2001 showed potent DPPH radical scavenging activity and SOD-like effects. Additionally, hyaluronidase, elastase, collagenase, and MMP-1 activities were significantly inhibited by E-AP-SM2001. We also observed that E-AP-SM2001 effectively reduced melanin production by B16/F10 melanoma cells and mushroom tyrosinase activities. Furthermore, significant increases in skin water content were detected in E-AP-SM2001- treated mouse skin, as compared with vehicle-treated control skin. Notably, a mask pack containing E-AP-SM2001 showed a >twofold more extensive moisturizing effect compared with one containing Saccharomycopsis ferment filtrate. Our results suggest that E-AP-SM2001 has adequate antiaging, antiwrinkle, and whitening benefits and skin moisturizing effect. These effects involve reducing hyaluronidase, elastase, collagenase, and MMP-1 activities, as well as inhibition of melanin production and tyrosinase activities. Therefore, the antioxidant E-AP-SM2001 may serve as a predictable functional ingredient.

Study of hydrogenation of Sm2Fe17-yGay by means of X-ray diffraction

International Nuclear Information System (INIS)

Teresiak, A.; Uhlemann, M.; Kubis, M.; Gebel, B.; Mattern, N.; Mueller, K.-H.

2000-01-01

The hydrogenation process of Sm 2 Fe 17-y Ga y (y=0-2) was studied. X-ray investigations show a decreasing hydrogen solubility in the intermetallic alloy with increasing Ga-content from 4.0±0.3 atoms per formula unit for Sm 2 Fe 17 to 2.85±0.05 for Sm 2 Fe 15 Ga 2 . The larger Ga atoms reduce the size of the interstitial sites and thereby the maximum hydrogen concentration is decreased. The behaviour of the lattice parameters a and c with increasing Ga content points to a changed hydrogen distribution on the interstitial sites, becoming more statistical. In situ observations by means of high temperature X-ray diffraction show that the hydrogen absorption process is diffusion controlled. The hydrogen absorption starts at an annealing temperature of 120-140 C in all cases. The solubility of hydrogen decreases with increasing temperature. The hydrogen is completely desorbed above 350 C in all cases. The absorption/desorption process is reversible between room temperature and 400 C. Annealing at temperatures above 400 C leads to the decomposition of the Sm 2 Fe 17 phase, indicated by emerging of α-Fe. The formation of SmH x is established at 600 C. The decomposition temperature increases with increasing Ga-content. Up to 750 C, only Sm 2 Fe 17 is completely decomposed. (orig.)

Structural and magnetic properties of SmCo-based magnetic films grown by electron-beam evaporation

Energy Technology Data Exchange (ETDEWEB)

Saravanan, P., E-mail: psdrdo@gmail.com [Defence Metallurgical Research Laboratory, Hyderabad 500058 (India); Vinod, V.T.P.; Černík, Miroslav [Institute for Nanomaterials, Advanced Technologies and Innovation, Department of Natural Sciences, Technical University of Liberec, Studentská 1402/2, Liberec 1, 461 17 (Czech Republic); Vishnuraj, R.; Arout Chelvane, J.; Kamat, S.V. [Defence Metallurgical Research Laboratory, Hyderabad 500058 (India); Hsu, Jen-Hwa, E-mail: jhhsu@phys.ntu.edu.tw [Department of Physics, National Taiwan University, Taipei 106, Taiwan (China)

2015-07-01

Sub-micron thick Sm–Co films (200 and 300 nm) with selective phase composition are grown on Si (100) substrates by electron-beam evaporation using Sm-lean alloy targets such as Sm{sub 4}Co{sub 96} and Sm{sub 8}Co{sub 92}. The structural and magnetic properties of Sm–Co films are characterized by x-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM) and super-conducting quantum interference device (SQUID) magnetometer. The Sm–Co films obtained with the Sm{sub 4}Co{sub 96} target exhibit Sm{sub 2}Co{sub 17} as a prominent phase; while the films produced with the Sm{sub 8}Co{sub 92} target show Sm{sub 2}Co{sub 7} as a major phase. Both the Sm–Co films reveal granular morphology; however, the estimated grain size values are slightly lower in the case of Sm{sub 2}Co{sub 7} films, irrespective of their thicknesses. Coercivity (H{sub c}) values of 1.48 and 0.9 kOe are achieved for the as-grown 200-nm thick Sm{sub 2}Co{sub 17} and Sm{sub 2}Co{sub 7}-films. Temperature-dependent magnetization studies confirm that the demagnetization behaviors of these films are consistent with respect to the identified phase composition. Upon rapid thermal annealing, maximum H{sub c} value of 8.4 kOe is achieved for the 200 nm thick Sm{sub 2}Co{sub 17}-films. As far as e-beam evaporated Sm–Co films are concerned, this H{sub c} value is one of the best values reported so far. - Highlights: • Electron-beam evaporation was exploited to grow sub-μm thick Sm–Co films. • Sm{sub 2}Co{sub 7} and Sm{sub 2}Co{sub 17} magnetic phases were crystallized using Sm-lean alloy targets. • Both 200 and 300-nm thick Sm–Co films revealed distinct granular morphology. • Sm–Co films of lower thickness exhibited high H{sub c} and low M{sub s} and vice-versa. • Coercivity value of 8.4 kOe achieved for the 200-nm thick Sm{sub 2}Co{sub 17}-films after RTA.

Preparation of nanocrystalline Ce{sub 1−x}Sm{sub x}(Fe,Co){sub 11}Ti by melt spinning and mechanical alloying

Energy Technology Data Exchange (ETDEWEB)

Wuest, H., E-mail: holger.wuest@de.bosch.com [Robert Bosch GmbH, Postfach 10 60 50, 70049 Stuttgart (Germany); Bommer, L., E-mail: lars.bommer@de.bosch.com [Robert Bosch GmbH, Postfach 10 60 50, 70049 Stuttgart (Germany); Huber, A.M., E-mail: arne.huber@de.bosch.com [Robert Bosch GmbH, Postfach 10 60 50, 70049 Stuttgart (Germany); Goll, D., E-mail: dagmar.goll@htw-aalen.de [Aalen University, Materials Research Institute, Beethovenstr. 1, 73430 Aalen (Germany); Weissgaerber, T., E-mail: thomas.weissgaerber@ifam-dd.fraunhofer.de [Fraunhofer Institute for Manufacturing Technology and Advanced Materials (IFAM), Branch Lab Dresden, Winterbergstraße 28, 01277 Dresden (Germany); Kieback, B., E-mail: bernd.kieback@ifam-dd.fraunhofer.de [Fraunhofer Institute for Manufacturing Technology and Advanced Materials (IFAM), Branch Lab Dresden, Winterbergstraße 28, 01277 Dresden (Germany); Technische Universität Dresden, Institute for Materials Science, Helmholtzstraße 7, 01069 Dresden (Germany)

2017-04-15

Permanent magnetic materials based on Ce(Fe, Co){sub 12−x}Ti{sub x} with the ThMn{sub 12} structure are promising candidates for replacing NdFeB magnets. Its intrinsic magnetic properties are not far below the values of Nd{sub 2}Fe{sub 14}B, and the high amount of Fe and the fact that Ce is much more abundant and less expensive than Nd encourages the reasonable interest in these compounds. Nanocrystalline magnetic material of the composition Ce{sub 1−x}Sm{sub x}Fe{sub 11−y}Co{sub y}Ti (x=0−1 and y=0; 1.95) has been produced by both melt spinning and mechanical alloying. Alloys containing only Ce as rare earth element (x=0) show coercivities below 77 kA/m, while for x=1 H{sub c,J} values up to 392 kA/m are reached. Coercivity shows rather an exponential than a linear dependence on the gradual substitution of Ce by Sm. - Highlights: • CeFe{sub 11}Ti nanocrystalline samples demonstrate values of H{sub c,J} up to 77 kA/m. • SmFe{sub 11}Ti nanocrystalline samples demonstrate values of H{sub c,J} up to 392 kA/m. • Dependence of H{sub c,J} on x in Ce{sub 1−x}Sm{sub x(}Fe, Co){sub 11}Ti obeys non-linear dependence. • Optimum annealing shifts to from 800 °C for CeFe{sub 11}Ti to 900 °C for SmFe{sub 11}Ti.

White-emission in single-phase Ba2Gd2Si4O13:Ce3 +,Eu2 +,Sm3 + phosphor for white-LEDs

Science.gov (United States)

Jiang, Xiumin; Zhang, Yuqian; Zhang, Jia

2018-03-01

To develop new white-light-emitting phosphor, a series of Ce3 +-Eu2 +-Sm3 + doped Ba2Gd2Si4O13 (BGS) phosphors were prepared by the solid-state reaction method, and their photoluminescence properties were studied. The Ce3 + and Eu2 + single-doped BGS show broad emission bands around in the region of 350-550 and 420-650 nm, respectively. By co-doping Ce3 +-Eu2 + into BGS, the energy transfer (ET) from Ce3 + to Eu2 + is inefficient, which could be due to the competitive absorption between the two activator ions. The Sm3 +-activated BGS exhibits an orangey-red emission in the region of 550-750 nm. To achieve white emission, the BGS:0.06Ce3 +,0.04Eu2 +,ySm3 + (0 ≤ y ≤ 0.18) phosphors were designed, in which the ET from Ce3 +/Eu2 + to Sm3 + was observed. The emission color can be tuned by controlling the Sm3 + concentration, and white emission was obtained in the BGS:0.06Ce3 +,0.04Eu2 +,0.06Sm3 + sample. The investigation of thermal luminescence stability for the typical BGS:0.06Ce3 +,0.04Eu2 +,0.06Sm3 + sample reveals that the emission intensities of both Eu2 + and Sm3 + demonstrate continuous decrease but the Ce3 + emission is enhanced gradually with increasing temperature. The corresponding reason has been discussed.

Effects of synthesis conditions on structure and surface properties of SmMn{sub 2}O{sub 5} mullite-type oxide

Energy Technology Data Exchange (ETDEWEB)

Thampy, Sampreetha; Ibarra, Venessa; Lee, Yun-Ju [Department of Materials Science and Engineering, University of Texas at Dallas, Richardson, TX 75080 (United States); McCool, Geoffrey [Nanostellar Inc., 3696 Haven Avenue, Redwood City, CA 94063 (United States); Cho, Kyeongjae [Department of Materials Science and Engineering, University of Texas at Dallas, Richardson, TX 75080 (United States); Hsu, Julia W.P., E-mail: jwhsu@utdallas.edu [Department of Materials Science and Engineering, University of Texas at Dallas, Richardson, TX 75080 (United States)

2016-11-01

Highlights: • Investigate the effects of calcination temperature and precipitation pH on crystallinity, phase purity, particle size, surface composition, and NO adsorption capacity of SmMn{sub 2}O{sub 5}. • High calcination temperature increases mullite phase purity but decreases specific surface area (SSA). • Mullite phase purity is independent of pH while SSA monotonically increases. • SSA and surface Mn/Sm ratio determine NO uptake. - Abstract: A mixed-phase compound that contains SmMn{sub 2}O{sub 5} mullite-type oxides has been reported to display excellent catalytic activity for nitric oxide (NO) oxidation. Here we investigate the effects of calcination temperature and precipitation pH on structural, physical, chemical, and surface properties of SmMn{sub 2}O{sub 5}. As the calcination temperature increases from 750 °C to 1000 °C, mullite phase purity increases from 74% to 100%, while specific surface area (SSA) decreases from 23.6 m{sup 2}/g to 5.1 m{sup 2}/g with particle size increases correspondingly. Mullite phase purity (87%) is independent of pH between 8.5–10.4, whereas SSA monotonically increases from 12.5 m{sup 2}/g at pH 8.1 to 27.4 m{sup 2}/g at pH 13. X-ray photoelectron spectroscopy (XPS) studies reveal that the surface Mn/Sm ratio is similar to the bulk value and is unaffected by calcination temperature and pH values up to 10.4, whereas sample precipitated at pH 13 is surface-rich in Sm. NO chemisorption studies show that the SSA and surface Mn/Sm ratio determine NO uptake by SmMn{sub 2}O{sub 5} mullite oxides.

Structural and luminescence properties of Sm3+ -doped bismuth phosphate glass for orange-red photonic applications.

Science.gov (United States)

Damodaraiah, S; Reddy Prasad, V; Ratnakaram, Y C

2018-05-01

In the present study, the effect of bismuth oxide (Bi 2 O 3 ) content on the structural and optical properties of 0.5Sm 3+ -doped phosphate glass and the effect of concentration on structural and optical properties of Sm 3+ -doped bismuth phosphate (BiP) glass were studied. Structural characterization was accomplished using X-ray diffraction (XRD), scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS), Fourier transform infrared (FTIR) spectroscopy and 31 P nuclear magnetic resonance (NMR) spectroscopy. Optical properties were studied using absorption, photoluminescence and decay measurements. Using optical absorption spectra, Judd-Ofelt parameters were derived to determine the local structure and bonding in the vicinity of Sm 3+ ions. The emission spectra of Sm 3+ -doped BiP glass showed two intense emission bands, 4 G 5/2 → 6 H 7/2 (orange) and 4 G 5/2 → 6 H 9/2 (red) for which the stimulated emission cross-sections (σ e ) and branching ratios (β) were found to be higher. The quantum efficiencies were also calculated from decay measurements recorded for the 4 G 5/2 level of Sm 3+ ions. The suitable combination of Bi 2 O 3 (10 mol%) and Sm 3+ (0.5 mol%) ions in these glasses acted as an efficient lasing material and might be suitable for the development of visible orange-red photonic materials. Copyright © 2018 John Wiley & Sons, Ltd.

The electrodeposition of 149Sm targets for (n,α) studies

International Nuclear Information System (INIS)

Ingelbrecht, C.; Ambeck-Madsen, J.; Teipel, K.; Robouch, P.; Arana, G.; Pomme, S.

1999-01-01

A method of electrodeposition from ethanol was developed for the production of 149 Sm targets of area 50x60 mm 2 to be used for (n,α) experiments. Targets of 60 μg cm -2 Sm were obtained with a Sm yield of 50% and a Sm mass fraction of 35% after calcination of the layers at 450 deg. C. Target substrates were 20 μm aluminium foils mounted on brass frames. A water cooling jig was constructed to protect the glue used for mounting during the calcination process. The layers were characterized by inductively coupled plasma source mass spectrometry (ICP-MS) and by neutron activation analysis (NAA)

Synthesis and photoluminescence properties of Sm{sup 3+}substituted glaserite-type orthovanadates K{sub 3}Y[VO{sub 4}]{sub 2} with monoclinic structure

Energy Technology Data Exchange (ETDEWEB)

Duke John David, A., E-mail: dukejohndavid02@gmail.com [Voorhees College, Vellore, Tamil Nadu (India); Muhammad, G. Shakil [Islamiah College, Vaniyambadi, Tamil Nadu (India); Sivakumar, V. [National Institute of Technology (NIT), Rourkela (India)

2016-09-15

A novel phosphor of Glaserite type Orthovanadate K{sub 3}Y[VO{sub 4}]{sub 2} substituted with the trivalent rare-earth Sm{sup 3+} ions were synthesized by the conventional high temperature solid-state reaction method, their structural characterization and photoluminescent properties were investigated by X-ray diffraction and spectrofluorimetry. The phase-purity of glaserite structure in the synthesized compound was verified by XRD study. The morphology was measured by FESEM. Host lattice emits broad-band green color and it is originated from the [VO{sub 4}]{sup 3−}. Photoluminescence studies of Sm{sup 3+} activated samples show orange red emission. The charge transfer behaviours from [VO{sub 4}]{sup 3−} to Sm{sup 3+} ions (host to activator) in K{sub 3}Y{sub (1−x)}[VO{sub 4}]{sub 2}: {sub x}Sm{sup 3+} phosphors have been confirmed by photoluminescence and PL decay life time measurement. No concentration quenching was observed even for higher concentration of the dopant Sm{sup 3+} ions. The CIE chromaticity color coordinate values were calculated and it is very much closer to the NTSC standards. All the results clearly indicate that self-activated K{sub 3}Y{sub 1−x}[VO{sub 4}]{sub 2} with the rare earth {sub x}Sm{sup 3+} activated phosphors show great potential as a phosphor material for near-UV based white LEDs.

Magnetic anomalies in SmMn2Ge2

International Nuclear Information System (INIS)

Mallik, R.; Sampathkumaran, E.V.; Paulose, P.L.

1997-01-01

The results of electrical resistance (ρ), magnetoresistance (Δρ/ρ) and magnetization (M) measurements are reported for polycrystalline SmMn 2 Ge 2 . Sharp variations in ρ at 108 and 142 K attributable to well-known magnetic transitions from Mn sublattice are noted. Sign of the ρ across these transitions exhibits anomalies. Δρ/ρ data indicate the existence of a hitherto unrecognized magnetic anomaly near 30 K, presumably of ferrimagnetic type as revealed by isothermal M data at low temperatures. (orig.)

The monoclonal antibody SM5-1 recognizes a fibronectin variant which is widely expressed in melanoma

Directory of Open Access Journals (Sweden)

Guo Yajun

2006-01-01

Full Text Available Abstract Background Previously we have generated the monoclonal antibody SM5-1 by using a subtractive immunization protocol of human melanoma. This antibody exhibits a high sensitivity for primary melanomas of 99% (248/250 tested and for metastatic melanoma of 96% (146/151 tested in paraffin embedded sections. This reactivity is superior to the one obtained by HMB-45, anti-MelanA or anti-Tyrosinase and is comparable to anti-S100. However, as compared to anti-S100, the antibody SM5-1 is highly specific for melanocytic lesions since 40 different neoplasms were found to be negative for SM5-1 by immunohistochemistry. The antigen recognized by SM5-1 is unknown. Methods In order to characterize the antigen recognized by mAb SM5-1, a cDNA library was constructed from the metastatic human melanoma cell line SMMUpos in the Uni-ZAP lambda phage and screened by mAb SM5-1. The cDNA clones identified by this approach were then sequenced and subsequently analyzed. Results Sequence analysis of nine independent overlapping clones (length 3100–5600 bp represent fibronectin cDNA including the ED-A, but not the ED-B region which are produced by alternative splicing. The 89aa splicing variant of the IIICS region was found in 8/9 clones and the 120aa splicing variant in 1/9 clones, both of which are included in the CS1 region of fibronectin being involved in melanoma cell adhesion and spreading. Conclusion The molecule recognized by SM5-1 is a melanoma associated FN variant expressed by virtually all primary and metastatic melanomas and may play an important role in melanoma formation and progression. This antibody is therefore not only of value in immunohistochemistry, but potentially also for diagnostic imaging and immunotherapy.

The glomerular parietal epithelial cell's responses are influenced by SM22 alpha levels.

Science.gov (United States)

Naito, Shokichi; Pippin, Jeffrey W; Shankland, Stuart J

2014-11-06

Studies have shown in several diseases initially affecting podocytes, that the neighboring glomerular parietal epithelial cells (PECs) are secondarily involved. The PEC response might be reparative under certain circumstances, yet injurious under others. The factors governing these are not well understood. We have shown that SM22α, an actin-binding protein considered a marker of smooth muscle differentiation, is upregulated in podocytes and PECs in several models of podocyte disease. However, the impact of SM22α levels on PECs is not known. Experimental glomerular disease, characterized by primary podocyte injury, was induced in aged-matched SM22α+/+ and SM22α-/-mice by intraperitoneal injection of sheep anti-rabbit glomeruli antibody. Immunostaining methods were employed on days 7 and 14 of disease. The number of PEC transition cells, defined as cells co-expressing a PEC protein (PAX2) and podocyte protein (Synaptopodin) was higher in diseased SM22α-/-mice compared with SM22α+/+mice. WT1 staining along Bowman's capsule is higher in diseased SM22α-/-mice. This was accompanied by increased PEC proliferation (measured by ki-67 staining), and an increase in immunostaining for the progenitor marker NCAM, in a subpopulation of PECs in diseased SM22α-/-mice. In addition, immunostaining for vimentin and alpha smooth muscle actin, markers of epithelial-to-mesenchymal transition (EMT), was lower in diseased SM22α-/-mice compared to diseased SM22α+/+mice. SM22α levels may impact how PECs respond following a primary podocyte injury in experimental glomerular disease. Absent/lower levels favor an increase in PEC transition cells and PECs expressing a progenitor marker, and a lower EMT rate compared to SM22α+/+mice, where SM22 levels are markedly increased in PECs.

Coercive force changes in Sm(CoFeCuZr)z during step-like heat treatments

International Nuclear Information System (INIS)

Puzanova, T.Z.; Shchegoleva, N.N.; Sakhnova, L.V.; Majkov, V.G.; Shur, Ya.S.; Nikolaeva, N.V.

1987-01-01

Sm(Co 0.67 Fe 0.22 Cu 0.08 Zr 0.03 ) 8.35 alloy, contaning two homogeneous solid solutions SmM 6.85 and SmM 7.75 (M=Co, Fe, Cu, Zr) after high-temperature treatment, is investigated. It is shown, that after isothermal tempering at 800 deg C, SmM 6.85 and SmM 7.75 are close by microstructure and their coercive forces change in a different way during step-like cooling within 700-400 deg C interval. Possibility of producing material, single-phase in magnetic relation, is discussed

SmBaCoCuO5+x as cathode material based on GDC electrolyte for intermediate-temperature solid oxide fuel cells

International Nuclear Information System (INIS)

Lue Shiquan; Long, Guohui; Ji Yuan; Meng Xiangwei; Zhao Hongyuan; Sun Cuicui

2011-01-01

Research highlights: → We synthesize a new kind of layered perovskite SmBaCoCuO 5+x (SBCCO) as a cathode material of a solid oxide fuel cell. → There are some reports on the performance of cathodes in proton-conducting SOFCs based on BaCe 0.8 Sm 0.2 O 3-δ electrolyte. → However, to the best of our knowledge, the performance of SBCCO cathodes in oxygen-ion conducting SOFCs has not been reported to date. → In this work, the ceramic powder SBCCO is examined as a cathode for IT-SOFCs based on Ce 0.9 Gd 0.1 O 1.95 (GDC) electrolyte. - Abstract: The performance of SmBaCoCuO 5+x (SBCCO) cathode has been investigated for their potential utilization in intermediate-temperature solid oxide fuel cells (IT-SOFCs). The powder X-ray diffraction (XRD), thermal expansion and electrochemical performance on Ce 0.9 Gd 0.1 O 1.95 (GDC) electrolyte are evaluated. XRD results show that there is no chemical reaction between SBCCO cathode and GDC electrolyte when the temperature is below 950 o C. The thermal expansion coefficient (TEC) value of SBCCO is 15.53 x 10 -6 K -1 , which is ∼23% lower than the TEC of the SmBaCo 2 O 5+x (SBCO) sample. The electrochemical impedance spectra reveals that SBCCO symmetrical half-cells by sintering at 950 deg. C has the best electrochemical performance and the area specific resistance (ASR) of SBCCO cathode is as low as 0.086 Ω cm 2 at 800 o C. An electrolyte-supported fuel cell generates good performance with the maximum power density of 517 mW cm -2 at 800 deg. C in H 2 . Preliminary results indicate that SBCCO is promising as a cathode for IT-SOFCs.

Exchange-coupled nanoscale SmCo/NdFeB hybrid magnets

Energy Technology Data Exchange (ETDEWEB)

Wang Dapeng; Poudyal, Narayan; Rong, Chuanbing [Department of Physics, University of Texas at Arlington, Arlington, TX 76019 (United States); Zhang Ying [Department of Physics, University of Texas at Arlington, Arlington, TX 76019 (United States); Materials Science and Engineering, Ames Laboratory, USDOE, Iowa State University, Ames, IA 50011 (United States); Kramer, M.J. [Materials Science and Engineering, Ames Laboratory, USDOE, Iowa State University, Ames, IA 50011 (United States); Liu, J. Ping, E-mail: pliu@uta.edu [Department of Physics, University of Texas at Arlington, Arlington, TX 76019 (United States)

2012-09-15

Nanoscale hybrid magnets containing SmCo{sub 5} and Nd{sub 2}Fe{sub 14}B hard magnetic phases have been produced via a novel 'in-one-pot' processing route. The grain size of the processed bulk composite materials is controlled below 20 nm. The refinement of the nanoscale morphology leads to effective inter-phase exchange coupling that results in single-phase like magnetic properties. Energy product of 14 MGOe was obtained in the isotropic nanocomposite magnets at room temperature. At elevated temperatures, the hybrid magnets have greatly improved thermal stability compared to the Nd{sub 2}Fe{sub 14}B single-phase counterpart and have substantially increased magnetization and energy products compared to the single-phase SmCo{sub 5} counterpart. - Highlights: Black-Right-Pointing-Pointer We realize interphase exchange coupling in nanoscale SmCo{sub 5}/Nd{sub 2}Fe{sub 14}B magnets. Black-Right-Pointing-Pointer We observe homogenously distributed two-phase grains with size smaller than 20 nm. Black-Right-Pointing-Pointer We observe a common Curie temperature in the hybrid magnet. Black-Right-Pointing-Pointer High-temperature magnetic properties of the hybrid magnets greatly improved. Black-Right-Pointing-Pointer Plastic deformation of composite materials leads to self-nanoscaling of grains.

Sm29, but not Sm22.6 retains its ability to induce a protective immune response in mice previously exposed to a Schistosoma mansoni infection.

Directory of Open Access Journals (Sweden)

Clarice Carvalho Alves

2015-02-01

Full Text Available BACKGROUND: A vaccine against schistosomiasis would have a great impact in disease elimination. Sm29 and Sm22.6 are two parasite tegument proteins which represent promising antigens to compose a vaccine. These antigens have been associated with resistance to infection and reinfection in individuals living in endemic area for the disease and induced partial protection when evaluated in immunization trials using naïve mice. METHODOLOGY/PRINCIPALS FINDINGS: In this study we evaluated rSm29 and rSm22.6 ability to induce protection in Balb/c mice that had been previously infected with S. mansoni and further treated with Praziquantel. Our results demonstrate that three doses of the vaccine containing rSm29 were necessary to elicit significant protection (26%-48%. Immunization of mice with rSm29 induced a significant production of IL-2, IFN-γ, IL-17, IL-4; significant production of specific antibodies; increased percentage of CD4+ central memory cells in comparison with infected and treated saline group and increased percentage of CD4+ effector memory cells in comparison with naïve Balb/c mice immunized with rSm29. On the other hand, although immunization with Sm22.6 induced a robust immune response, it failed to induce protection. CONCLUSION/SIGNIFICANCE: Our results demonstrate that rSm29 retains its ability to induce protection in previously infected animals, reinforcing its potential as a vaccine candidate.

Study of 148-152Sm nuclei employing γ - derived from B(E2) values and level energies

International Nuclear Information System (INIS)

Sharma, Aparna; Varshney, A.K.; Singh, M.; Gupta, D.K.; Singh, Yuvraj; Gupta, K.K.; Bihari, Chhail; Varshney, Mani

2011-01-01

The study of samarium nuclei has been a challenging theoretical problem, since they lie in the range from near spherical to well deformed shapes. 148 Sm was believed to be basically spherical while 154 Sm is thought to be well deformed nucleus and 150-15 '2Sm are transitional nuclei

SM2RAIN-CCI: a new global long-term rainfall data set derived from ESA CCI soil moisture

Science.gov (United States)

Ciabatta, Luca; Massari, Christian; Brocca, Luca; Gruber, Alexander; Reimer, Christoph; Hahn, Sebastian; Paulik, Christoph; Dorigo, Wouter; Kidd, Richard; Wagner, Wolfgang

2018-02-01

Accurate and long-term rainfall estimates are the main inputs for several applications, from crop modeling to climate analysis. In this study, we present a new rainfall data set (SM2RAIN-CCI) obtained from the inversion of the satellite soil moisture (SM) observations derived from the ESA Climate Change Initiative (CCI) via SM2RAIN (Brocca et al., 2014). Daily rainfall estimates are generated for an 18-year long period (1998-2015), with a spatial sampling of 0.25° on a global scale, and are based on the integration of the ACTIVE and the PASSIVE ESA CCI SM data sets.The quality of the SM2RAIN-CCI rainfall data set is evaluated by comparing it with two state-of-the-art rainfall satellite products, i.e. the Tropical Measurement Mission Multi-satellite Precipitation Analysis 3B42 real-time product (TMPA 3B42RT) and the Climate Prediction Center Morphing Technique (CMORPH), and one modeled data set (ERA-Interim). A quality check is carried out on a global scale at 1° of spatial sampling and 5 days of temporal sampling by comparing these products with the gauge-based Global Precipitation Climatology Centre Full Data Daily (GPCC-FDD) product. SM2RAIN-CCI shows relatively good results in terms of correlation coefficient (median value > 0.56), root mean square difference (RMSD, median value test the capabilities of the data set to correctly identify rainfall events under different climate and precipitation regimes.The SM2RAIN-CCI rainfall data set is freely available at https://doi.org/10.5281/zenodo.846259.

Moessbauer investigation of Sm{sub 2}Fe{sub 17-x}Ga{sub x} powders at different steps of the HDDR process

Energy Technology Data Exchange (ETDEWEB)

Steyaert, S.; Breton, J.-M. le; Teillet, J. [Rouen Univ. (France). Groupe de Metall. Phys.; Kubis, M.; Handstein, A.; Mueller, K.H. [Rouen Univ. (France). Groupe de Metall. Phys.]|[Institut fuer Festkoerper- und Werkstofforschung Dresden e.V. (Germany). Inst. fuer Metallische Werkstoffe

1998-07-01

Sm{sub 2}Fe{sub 17-x}Ga{sub x} powders (x=0,0.5,1,2) obtained at different steps of the HDDR process were analysed by Moessbauer spectrometry. For the homogenised powders, the mean hyperfine field of the Sm{sub 2}Fe{sub 17-x}Ga{sub x} contribution increases with Ga content in agreement with a lattice expansion. The anisotropy change from planar to uniaxial is confirmed in samples with x = 2. In the hydrogenated powders, the value of the mean hyperfine field of Sm{sub 2}Fe{sub 17-x}Ga{sub x}H{sub y} is greater than that of Sm{sub 2}Fe{sub 17-x}Ga{sub x} in the corresponding homogenised powders, in agreement with the presence of hydrogen in the 2:17 structure. It decreases with increasing Ga amount, suggesting that the H content in the Sm{sub 2}Fe{sub 17-x}Ga{sub x}H{sub y} phase decreases with increasing Ga content. In the disproportionated powders, the disproportionation reaction is incomplete for x {>=} 1 as the contributions of both the Sm{sub 2}Fe{sub 17-x}Ga{sub x}H{sub y} and {alpha}-Fe(Ga) phases are observed in the corresponding Moessbauer spectra. This indicates that for x {>=} 1 the hydrogen diffusion is inhibited during hydrogenation. (orig.)

High-Performance Epoxy-Resin-Bonded Magnets Produced from the Sm2Fe17Nx Powders Coated by Copper and Zinc Metals

Science.gov (United States)

Noguchi, Kenji; Machida, Ken-ichi; Adachi, Gin-ya

2001-04-01

Fine powders of Sm2Fe17Nx coated with copper metal reduced from CuCl2 and/or zinc metal subsequently derived by photo-decomposition of diethylzinc [Zn(C2H5)2] were prepared, and their magnetic properties were characterized in addition to those of epoxy-resin-bonded magnets produced from the coated powders (Cu/Sm2Fe17Nx, Zn/Sm2Fe17Nx and Zn/Cu/Sm2Fe17Nx). The remanence (Br) and maximum energy product [(\\mathit{BH})max] of double metal-coated Zn/Cu/Sm2Fe17Nx powders were maintained at higher levels than those of single Zn metal-coated Sm2Fe17Nx ones (Zn/Sm2Fe17Nx) even after heat treatment at 673 K since the oxidation resistance and thermal stability were effectively improved by formation of the thick and uniform protection layer on the surface of Sm2Fe17Nx particles. Moreover, the epoxy-resin-bonded magnets produced from the Zn/Cu/Sm2Fe17Nx powders possessed good corrosion resistance in air at 393 K which it resulted in the smaller thermal irreversible flux loss than that of uncoated and single Zn metal-coated Sm2Fe17Nx powders in the temperature range of above 393 K.

Ferroelectric, magnetic and structural studies of the Bi4LaSmFe2Ti3O18 multiferroic material

International Nuclear Information System (INIS)

Alarcón-Suesca, C.E.; Cardona-Vásquez, J.A.; Salcedo-Fontecha, J.P.; Vargas-Jiménez, A.; Landínez-Téllez, D.A.; Roa-Rojas, J.

2014-01-01

We report the synthesis and characterization of the new Bi 4 LaSmFe 2 Ti 3 O 18 ferroelectric ceramic. X-ray characterization reveals reflections for layered perovskite Aurivillius system. Rietveld analyses of the powder pattern shows that Bi 4 LaSmFe 2 Ti 3 O 18 crystallizes in orthorhombic structure, which corresponds to the space group F2/mm (#42), with lattice parameters a=5.4240(16) Ǻ, b=5.4078(23) Ǻ and c=50.2440(12) Ǻ. Scanning electron microscopy (SEM) reveals the formation of dense material with plate-like morphology. Electric polarization curves were measured by means of a radiant ferroelectric tester, at room temperature in bulk samples and exhibit an intrinsic ferroelectric response, even at low applied fields. Measurements of the magnetization as a function of temperature after Zero field cooling and field cooling were carried out by using a MPMS Quantum Design SQUID magnetometer. We found an effective magnetic moment of 7.95 µB, which is 95.8% in agreement with the expected value calculated from Hund's rules. Magnetization curves as the function of applied fields reveal an incipient hysteretic behavior at room temperature

Investigations on optical properties of Sm3+ ion doped boro-phosphate glasses

Science.gov (United States)

Vijayakumar, R.; Suthanthirakumar, P.; Karthikeyan, P.; Marimuthu, K.

2015-06-01

The Sm3+ doped Boro-phosphate glasses with the chemical composition 60H3BO3+20Li2CO3+10ZnO+(10-x) H6NO4P+xSm2O3 (where x= 0.1, 0.5, 1 and 2 in wt%) have been prepared by melt quenching technique. The prepared glasses were characterized through optical absorption and luminescence spectral measurements. The band gap energies corresponding to the direct and indirect allowed transitions and the Urbach's energy values were estimated from the absorption spectra. Judd-Ofelt intensity parameters have been derived to predict the radiative properties of the various emission transitions. In order to identify the emission color of the prepared glasses, the emission intensities were analyzed using CIE 1931 color chromaticity diagram. The energy transfer process takes place between Sm3+-Sm3+ ions through cross-relaxation mechanism have also been investigated and the results were discussed and reported.

Energy transfer mechanism from Gd3+ to Sm3+ in K3Gd(PO4)2:Sm3+ phosphor

International Nuclear Information System (INIS)

Gupta, Palvi; Bedyal, A K; Kumar, Vinay; Khajuria, Y; Sharma, Vishal; Ntwaeaborwa, O M; Swart, H C

2015-01-01

Undoped K 3 Gd(PO 4 ) 2 and trivalent samarium (0.5–2.5 mol%) doped K 3 Gd(PO 4 ) 2 phosphors were synthesized by the solid-state method. The phase formation, optical and luminescence properties were investigated by x-ray diffraction (XRD), diffuse reflectance (DR) spectroscopy, and photoluminescence (PL) spectroscopy. The fluorescence decay spectra of the obtained phosphors were also recorded to study the energy transfer from sensitizer (Gd 3+ ) to activator (Sm 3+ ). Energy transfer effects from sensitizer to activator caused by rare-earth ions were mainly observed in the obtained PL and lifetime spectra. The decay curves of K 3 Gd(PO 4 ) 2 phosphor with different Sm 3+ ions concentrations were found to be non-exponential and the data is well fitted with the Inokuti–Hirayama (I–H) model. The energy transfer parameters such as critical distance for the transfer processes were determined. The Commission Internationale de l’Eclairage (CIE) chromatic coordinates and color-correlated temperature were also determined for the prepared phosphor. (paper)

Structure and Phase Transformation in the Giant Magnetostriction Laves-Phase SmFe₂

Energy Technology Data Exchange (ETDEWEB)

Liu, Xiaonan; Lin, Kun; Gao, Qilong; Zhu, He; Li, Qiang; Cao, Yili; Liu, Zhanning; You, Li; Chen, Jun; Ren, Yang [Argonne National Laboratory, X-Ray Science Division, Argonne, Illinois 60439, United States; Huang, Rongjin [Key Laboratory; Lapidus, Saul H. [Argonne National Laboratory, X-Ray Science Division, Argonne, Illinois 60439, United States; Xing, Xianran

2017-10-13

As one class of the most important intermetallic compounds, the binary Laves-phase is well-known for their abundant magnetic properties. Samarium-iron alloy system, SmFe₂, is a prototypical Laves compound that shows strong negative magnetostriction but relatively weak magnetocrystalline anisotropy. SmFe₂ has been identified as a cubic Fd$ \\overline{3}\\ $m structure at room temperature, however, the cubic symmetry does not match the spontaneous magnetization along the [111]_cubic direction. Here we studied the crystal structure of SmFe₂ by high-resolution synchrotron X-ray powder diffraction and X-ray total scattering methods. SmFe₂ is found to adopt a centrosymmetric trigonal R$ \\overline{3}\\ $m structure at room temperature, which transforms to an orthorhombic Imma structure at 200 K. This transition is in agreement with the changes of easy magnetization direction from [111]_cubic to [110]_cubic direction, and is further evidenced by the inflexion of thermal expansion behavior, the sharp decline of the magnetic susceptibility in the FC-ZFC curve, and the anomaly in the specific heat capacity measurement. The revised structure and phase transformation of SmFe₂ could be useful to understand the magnetostriction and related physical properties of other RM₂-type pseudo-cubic Laves-phase intermetallic compounds.

Propagation of Nd magnetic phases in Nd/Sm(001) superlattices

International Nuclear Information System (INIS)

Soriano, S; Dufour, C; Dumesnil, K; Stunault, A

2006-01-01

The propagation of Nd long range magnetic order in the hexagonal and cubic sublattices has been investigated in double hexagonal compact Nd/Sm(001) superlattices by resonant x-ray magnetic scattering at the Nd L 2 absorption edge. For a superlattice with 3.7 nm thick Sm layers, the magnetic structure of the hexagonal sublattice propagates coherently through several bilayers, whereas the order in the cubic sublattice remains confined to single Nd blocks. For a superlattice with 1.4 nm thick Sm layers, the magnetic structures of both sublattices appear to propagate coherently through the superlattice. This is the first observation (i) of the long range coherent propagation of Nd order on the cubic sites between Nd blocks and (ii) of a different thickness dependence of the propagation of the Nd magnetic phases associated with the hexagonal and cubic sublattices. The propagation of the Nd magnetic order through Sm is interpreted in terms of generalized susceptibility of the Nd conduction electrons

Functional organization of the Sm core in the crystal structure of human U1 snRNP.

OpenAIRE

Weber, G.; Trowitzsch, S.; Kastner, B.; Lührmann, R.; Wahl, M.

2010-01-01

The U1 small nuclear ribonucleoprotein initiates the assembly of the spliceosome. Here, the structure of the natively purified U1 small nuclear ribonucleoprotein particle reveals the core Sm protein ring and its interactions with the Sm site in the small nuclear RNA.

Crossrelaxations and non-radiative energy transfer from (4G5/2) Sm3+ → (5D0) Eu3+: B2O3–ZnO glasses

International Nuclear Information System (INIS)

Naresh, V.; Rudramadevi, B.H.; Buddhudu, S.

2015-01-01

Graphical abstract: The energy transfer process occurring from Sm 3+ to Eu 3+ in B 2 O 3 –ZnO (BZn) glasses is analyzed. Based on the Foster–Dexter theory, the possibility of energy transfer between Sm 3+ and Eu 3+ has been demonstrated from the spectral overlap of Eu 3+ absorption and Sm 3+ emission, photoluminescence spectra, energy level diagram and lifetime measurements. The energy transfer mechanism in (Sm 3+ + Eu 3+ ) co-doped glass is governed by dipole–dipole interaction. - Highlights: • Spectroscopic properties of individually doped Sm 3+ , Eu 3+ & co-doped (Sm 3+ + Eu 3+ ) in BZn glasses were studied separately. • The effect of Eu 3+ concentration on luminescence properties is explained from cross-relaxations. • Energy transfer from Sm 3+ ( 4 G 5/2 ) to Eu 3+ ( 5 D 0 ) has been explained from Foster–Dexter theory. • Dipole–dipole mechanism governs the energy transfer from Sm 3+ to Eu 3+ . - Abstract: The present paper reports on the results concerning to photoluminescence features of Eu 3+ , Sm 3+ ions and energy transfer process occurring from Sm 3+ to Eu 3+ doped in 45 B 2 O 3 –55 ZnO (BZn) glasses prepared by melt quenching technique. Luminescence quenching as a function of Eu 3+ concentration in BZn glasses has been discussed. Among the studied concentrations, 0.5 mol% of Eu 3+ is optimized because it has exhibited red emission transition 5 D 0 → 7 F 2 . With regard to Sm 3+ glasses, orange emission at 602 nm ( 4 G 5/2 → 6 H 7/2 ) has been noticed on exciting with λ exci = 403 nm. Based on the Foster–Dexter theory, the possibility of energy transfer between Sm 3+ and Eu 3+ has been explained from the spectral overlap of Eu 3+ absorption and Sm 3+ emission. The optimized concentration 0.5 mol% of Eu 3+ is co-doped with Sm 3+ in various concentrations ranging from 0.1 to 1.5 mol% inorder to study the sensitization effect of Sm 3+ on Eu 3+ luminescence. The results have revealed that with the addition of Sm 3+ to Eu 3+ : BZn

Electrospinning fabrication and luminescent properties of SrMoO4:Sm3+ nanofibers

International Nuclear Information System (INIS)

Du Pingfan; Song Lixin; Xiong Jie; Cao Houbao; Xi Zhenqiang; Guo Shaoyi; Wang Naiyan; Chen Jianjun

2012-01-01

Highlights: ► SrMoO 4 :Sm 3+ fluorescent nanofibers were fabricated by electrospinning. ► The properties of the SrMoO 4 :Sm 3+ nanofibers were investigated. ► The obtained nanofibers exhibit a fine orange-red fluorescent property. ► The PL intensity of the nanofibers is superior to the nanoparticles counterpart. ► The optimum doping concentration of Sm 3+ in the host lattice is 2 at.%. - Abstract: Samarium ions doped strontium molybdate (SrMoO 4 :Sm 3+ ) nanofibers (NFs) were fabricated by a simple electrospinning process. The obtained SrMoO 4 :Sm 3+ NFs are composed of scheelite-type tetragonal SrMoO 4 phase, and the NFs have an average diameter of ca. 90 nm. Under 275 nm ultraviolet (UV) excitation, the NFs show an orange-red fluorescent property symbolized by a characteristic emission (606 nm) resulting from the 4 G 5/2 → 6 H 7/2 energy level transition of Sm 3+ . And the photoluminescence (PL) emissi on intensity of the SrMoO 4 :Sm 3+ NFs is superior to that of the nanoparticles (NPs) counterpart under the same doping concentrations. The effect of Sm 3+ concentrations on the 4 G 5/2 → 6 H 7/2 emission intensity was also investigated. The result reveals that the concentration quenching will occur when the Sm 3+ content exceeds 2 at.%. In other words, the SrMoO 4 :Sm 3+ NFs have an optimal luminescent performance under such a doping concentration.

Level Lifetime Measurements in ^150Sm

Science.gov (United States)

Barton, C. J.; Krücken, R.; Beausang, C. W.; Caprio, M. A.; Casten, R. F.; Cooper, J. R.; Hecht, A. A.; Newman, H.; Novak, J. R.; Pietralla, N.; Wolf, A.; Zyromski, K. E.; Zamfir, N. V.; Börner, H. G.

2000-10-01

Shape/phase coexistence and the evolution of structure in the region around ^152Sm have recently been of great interest. Experiments performed at WNSL, Yale University, measured the lifetime of low spin states in a target of ^150Sm with the recoil distance method (RDM) and the Doppler-shift attenuation method (DSAM). The low spin states, both yrast and non-yrast, were populated via Coulomb excitation with a beam of ^16O. The experiments were performed with the NYPD plunger in conjunction with the SPEEDY γ-ray array. The SCARY array of solar cells was used to detect backward scattered projectiles, selecting forward flying Coulomb excited target nuclei. The measured lifetimes yield, for example, B(E2) values for transitions such as the 2^+2 arrow 2^+1 and the 2^+3 arrow 0^+_1. Data from the RDM measurment and the DSAM experiment will be presented. This work was supported by the US DOE under grants DE-FG02-91ER-40609 and DE-FG02-88ER-40417.

Polarized single crystal neutron diffraction study of the zero-magnetization ferromagnet Sm1 -xGdxAl2 (x =0.024 )

Science.gov (United States)

Chatterji, T.; Stunault, A.; Brown, P. J.

2018-02-01

We have determined the temperature evolution of the spin and orbital moments in the zero-magnetization ferromagnet Sm1 -xGdxAl2 (x = 0.024) by combining polarized and unpolarized single crystal neutron diffraction data. The sensitivity of the polarized neutron technique has allowed the moment values to be determined with a precision of ≈0.1 μB . Our results clearly demonstrate that, when magnetized by a field of 8 T, the spin and orbital moments in Sm1 -xGdxAl2 are oppositely directed, so that the net magnetization is very small. Below 60 K the contributions from spin and orbital motions are both about 2 μB , with that due to orbital motion being slightly larger than that due to spin. Between 60 and 65 K the contributions of each to the magnetization fall rapidly and change sign at Tcomp ≈67 K , above which the aligned moments recover but with the orbital magnetization still slightly higher than the spin one. These results imply that above Tcomp the small resultant magnetization of the Sm3 + ion is oppositely directed to the magnetizing field. It is suggested that this anomaly is due to polarization of conduction electron spin associated with the doping Gd3 + ions.

Luminescence properties of Sm{sup 3+}-doped Sr{sub 3}Sn{sub 2}O{sub 7} phosphor

Energy Technology Data Exchange (ETDEWEB)

Lei Bingfu, E-mail: tleibf@jnu.edu.cn [Department of Physics, Jinan University, Guangzhou 510632 (China); Department of Chemistry and Nanochemistry Institute, Jinan University, Guangzhou 510632 (China); Man Shiqing [Department of Chemistry and Nanochemistry Institute, Jinan University, Guangzhou 510632 (China); Department of Electronic Engineering, Jinan University, Guangzhou 510632 (China); Liu Yingliang [Department of Chemistry and Nanochemistry Institute, Jinan University, Guangzhou 510632 (China); Yue Song [Department of Physics, Jinan University, Guangzhou 510632 (China)

2010-12-01

We report on a luminescent phenomenon in Sm{sup 3+}-doped Sr{sub 3}Sn{sub 2}O{sub 7} afterglow phosphor. XRD, photoluminescence, afterglow emission spectra and long-lasting phosphorescence decay curve are used to characterize this phosphor. After irradiation by a 267-nm UV light for 5 min, the Sm{sup 3+}-doped Sr{sub 3}Sn{sub 2}O{sub 7} phosphor emits intense reddish-orange emitting afterglow from the {sup 4}G{sub 5/2} to {sup 6}H{sub J} (J = 5/2, 7/2, 9/2) transitions, and its afterglow can be seen with the naked eye in the dark clearly for more than 1 h after removal of the excitation source. Photoluminescence spectra reveal that the reddish-orange light-emitting long-lasting phosphorescence originate from the mixture of Sm{sup 3+} characteristic transitions. The afterglow decay curve of the Sm{sup 3+}-doped Sr{sub 3}Sn{sub 2}O{sub 7} phosphor contains a fast decay component and another slow decay one. The possible mechanism of this reddish-orange light-emitting LLP phosphor is also discussed based on the experiment results.

Impedance spectroscopy study of Na{sub 1/2}Sm{sub 1/2}TiO{sub 3} ceramic

Energy Technology Data Exchange (ETDEWEB)

Barik, S K; Choudhary, R N.P. [I.I.T., Department of Physics and Meteorology, Kharagpur (India); Mahapatra, P K [Vidyasagar University, Department of Physics and Technophysics, Midnapur, West Bengal (India)

2007-07-15

Complex impedance analysis of a valence-compensated perovskite ceramic oxide Na{sub 1/2}Sm{sub 1/2}TiO{sub 3}, prepared by a mixed oxide (solid-state reaction) method, has been carried out. The formation of single-phase material was confirmed by X-ray diffraction studies, and it was found to be an orthorhombic phase at room temperature. In a scanning electron microscope, grains separated by well-defined boundaries are visible, which is in good agreement with that of impedance analysis. Alternating current impedance measurements were made over a wide temperature range (31-400 C) in an air atmosphere. Complex impedance and modulus plots helped to separate out the contributions of grain and grain boundaries to the overall polarization or electrical behavior. The physical structure of the samples was visualized most prominently at higher temperatures (275 C) from the Nyquist plots showing inter- and intragranular impedance present in the material. The frequency dependence of electrical data is also analyzed in the framework of the conductivity and modulus formalisms. The bulk resistance, evaluated from the impedance spectrum, was observed to decrease with rise in temperature, showing a typical negative temperature coefficient of resistance-type behavior like that of semiconductors. The modulus mechanism indicates the non-Debye type of conductivity relaxation in the materials, which is supported by the impedance data. (orig.)

Exchange-coupled nanoscale SmCo/NdFeB hybrid magnets

Energy Technology Data Exchange (ETDEWEB)

Wang, Dapeng; Poudyal, Narayan; Rong, Chuanbing; Zhang, Ying; Kramer, Matthew J.; Liu, J. Ping

2012-05-11

Nanoscalehybridmagnets containing SmCo5 and Nd2Fe14B hard magnetic phases have been produced via a novel “in-one-pot” processing route. The grain size of the processed bulk composite materials is controlled below 20 nm. The refinement of the nanoscale morphology leads to effective inter-phase exchange coupling that results in single-phase like magnetic properties. Energy product of 14 MGOe was obtained in the isotropic nanocomposite magnets at room temperature. At elevated temperatures, the hybridmagnets have greatly improved thermal stability compared to the Nd2Fe14B single-phase counterpart and have substantially increased magnetization and energy products compared to the single-phase SmCo5 counterpart.

Overexpression of SmMYC2 Increases the Production of Phenolic Acids in Salvia miltiorrhiza

Directory of Open Access Journals (Sweden)

Na Yang

2017-10-01

Full Text Available MYC2 is a core transcription factor in the plant response to jasmonates. It also functions in secondary metabolism and various processes for growth and development. However, the knowledge about its role in Salvia miltiorrhiza is still very limited. We determined that the biosynthesis of salvianolic acid B (Sal B was strongly induced in 2-month-old transgenic plants that over-expressed SmMYC2. In the roots of transgenic line 12 that over-expressed SmMYC2 (OEM-12, the Sal B concentration was as high as 5.95 ± 0.07 mg g-1, a level that was 1.88-fold higher than that in control plants that had been transformed with an empty vector. Neither tanshinone IIA nor cryptotanshinone was detected by high-performance liquid chromatography in any of the genotypes. Global transcriptomic analysis using RNA sequencing revealed that most enzyme-encoding genes for the phenylpropanoid biosynthesis pathway were up-regulated in the overexpression lines. Furthermore, both the phenylalanine and tyrosine biosynthesis pathways were activated in those transgenics. Our data demonstrate that overexpression of SmMYC2 promotes the production of phenolic acids by simultaneously activating both primary and secondary pathways for metabolism in S. miltiorrhiza.

SM-1 negative ion source

International Nuclear Information System (INIS)

Huang Zhenjun; Wang Jianzhen

1987-01-01

The working principle and characteristics of SM-1 Negative Ion Source is mainly introduced. In the instrument, there is a device to remove O 3 . This instrument can keep high density of negative ions which is generated by the electrical coronas setting out electricity at negative high voltage and can remove the O 3 component which is harmful to the human body. The density of negative ions is higher than 2.5 x 10 6 p./cm 3 while that of O 3 components is less than 1 ppb at the distance of 50 cm from the panel of the instrument. The instrument sprays negative ions automatically without the help of electric fan, so it works noiselessly. It is widely used in national defence, industry, agriculture, forestry, stock raising, sidelines and in the places with an equipment of low density of negative ion or high concentration of O 3 components. Besides, the instrument may also be used to treat diseases, to prevent against rot, to arrest bacteria, to purify air and so on

Effect of temperature on the luminescence of Sm{sup 3+} ions in YAM crystals

Energy Technology Data Exchange (ETDEWEB)

Kaczkan, M. [Institute of Microelectronics and Optoelectronics PW, ul. Koszykowa 75, 00-662 Warsaw (Poland); Boruc, Z., E-mail: z.boruc@stud.elka.pw.edu.pl [Institute of Microelectronics and Optoelectronics PW, ul. Koszykowa 75, 00-662 Warsaw (Poland); Turczyński, S. [Institute of Electronic Materials Technology, ul. Wólczyńska 133, 01-919 Warsaw (Poland); Malinowski, M. [Institute of Microelectronics and Optoelectronics PW, ul. Koszykowa 75, 00-662 Warsaw (Poland)

2014-11-05

Highlights: • Different concentration Sm{sup 3+}-doped Y{sub 4}Al{sub 2}O{sub 9} crystals are fabricated by μ-pulling down method. • Thermally activated {sup 4}F{sub 3/2} → {sup 6}H{sub 5/2} emission of Sm{sup 3+} in YAM is studied. • Temperature dependent quenching mechanism of the {sup 4}G{sub 5/2} luminescence is proposed. - Abstract: The spectroscopic features of samarium Sm{sup 3+} activated Y{sub 4}Al{sub 2}O{sub 9} (YAM) crystals are presented and discussed. Temperature sensing properties of Sm{sup 3+}:YAM phosphor was demonstrated over the 300–1200 K range. Temperature dependent luminescence spectra and decay curves for the {sup 4}G{sub 5/2} level of Sm{sup 3+} in YAM were measured. Ratio of the fluorescence intensities arising from the two close lying {sup 4}F{sub 3/2} and {sup 4}G{sub 5/2} levels (with energy separation of ΔE ∼ 1000 cm{sup −1}) followed a straight line pattern, which confirms the Boltzmann distribution of the population, and can be used to measure temperature. The lifetime for the {sup 4}G{sub 5/2} level in 1% Sm doped sample decreases from 1.65 to 0.08 ms with heating from room temperature to 1200 K. This behavior of decays is discussed in terms of radiative and multiphonon decays as well as cross-relaxation dependence on temperature.

Mixed Messages from Garnet Lu-Hf and Sm-Nd Geochronology

Science.gov (United States)

Vervoort, J. D.; Wang, D.; Johnson, T. A.

2017-12-01

Garnet geochronology provides important information on the timing and conditions of metamorphism. As a major indicator mineral formed during metamorphism, its direct dating can not only help establish the timing of metamorphism, provide the "t" for P-T-t paths, but also, if the dated garnet can be placed in a textural context, can provide information on the timing of deformational features. With advances in chemistry and mass spectrometry, garnet Lu-Hf and Sm-Nd geochronology has become an important geochronological tool and we can now reliably (if not routinely) date a wide variety of garnet compositions formed under diverse conditions. In the course of dating a variety of lithologies using both Lu-Hf and Sm-Nd isotope systems, however, some intriguing results have emerged. Although there are many examples where the Lu-Hf and Sm-Nd systems give the same date within uncertainty, there are also many cases where these systems yield significantly different dates, and the differences between these dates can be considerable—many 10's of Ma of and even 100's of Ma. For example, in garnet-bearing Mesoproterozoic gneisses from across the Blue Ridge Province in Virginia, both Lu-Hf and Sm-Nd analyses (determined on the same solutions) define narrow time spans, but with the Sm-Nd dates systematically younger (for orthogneisses Lu-Hf dates are 1032 to 1019 Ma whereas Sm-Nd dates are 965 to 949 Ma—a difference of 67 to 80 Ma). There are many other examples of systematically younger Sm-Nd garnet dates in both the literature and with our ongoing research. Potential explanations for these differences include: 1) strong partitioning of Lu into garnet during growth yielding ages weighted toward the beginning of growth; 2) faster Lu diffusion from high Lu regions after garnet formation, potentially leading to isochron rotation and anomalously old Lu-Hf dates; and 3) differences in closure temperatures of the two isotope systems. We will review several examples of divergent Lu

Electron back scattered diffraction study of SmCo magnets

International Nuclear Information System (INIS)

Yonamine, T.; Fukuhara, M.; Machado, R.; Missell, F.P.

2008-01-01

The remanence and energy product of permanent magnets is a strong function of their crystallographic texture. Electron back scattered diffraction (EBSD) is a tool for texture analysis providing information about the atomic layers up to 50 nm below the surface of the material. This paper discusses experimental requirements for performing EBSD measurements on rare-earth permanent magnets and presents results on commercial SmCo magnet material. EBSD measurements proved to be very sensitive to misaligned grains and were sensitive to texture in good agreement with information provided by X-ray diffraction scans. Results for nanostructured Sm(CoFeCuZr) z magnets are also discussed

Degeneracy lifting due to thermal fluctuations around the frustration point between anticlinic antiferroelectric SmC(A)* and synclinic ferroelectric SmC*.

Science.gov (United States)

Sandhya, K L; Chandani, A D L; Fukuda, Atsuo; Vij, Jagdish K; Emelyanenko, A V; Ishikawa, Ken

2013-01-01

In the binary mixture phase diagram of MC881 and MC452, the borderline between anticlinic antiferroelectric SmC(A)(*) and synclinic ferroelectric SmC(*) becomes apparently parallel to the temperature ordinate axis at the critical concentration r(c). The free energy difference between SmC(A)(*) and SmC^{*} is extremely small in a wide temperature range near r(c). In such circumstances, by observing Bragg reflection spectra due to the director helical structure and electric-field-induced birefringence, we have observed the continuous change from SmC(A)(*) to SmC(*) for r/~r(c). These intriguing phenomena have been explained, successfully at least in the high-temperature region, by a thermal equilibrium between the synclinic and anticlinic orderings and the resulting Boltzmann distribution for the ratio between them; the thermal equilibrium is considered to be attained in a nonuniform defect-assisted way through solitary waves moving around dynamically. We have also discussed qualitatively an important role played by the effective long-range interlayer interactions in the low-temperature region.

The constitution of alloys in the Al-rich corner of the Al-Si-Sm ternary system

International Nuclear Information System (INIS)

Markoli, B.; Spaic, S.; Zupanic, F.

2001-01-01

The constitution of alloys and the liquidus surface in the Al-rich corner of the Al-Si-Sm ternary system were determined by the examination of controlled heated and cooled specimens, as well as heat-treated specimens by means of optical and scanning electron microscopy, energy-dispersive X-ray spectroscopy, differential thermal analysis and X-ray diffraction. The Al-rich corner of the Al-Si-Sm ternary system comprises five regions of primary crystallisation (α Al , β Si , Al 3 Sm, Al 2 Si 2 Sm and AlSiSm) with following characteristic invariant reaction sequences: ternary eutectic reaction L → α Al + β Si + Al 2 Si 2 Sm, and two liquidus transition reactions, i. e., L + Al 3 Sm → α Al + AlSiSm, and L + AlSiSm → α Al + Al 2 Si 2 Sm. Along with the position of ternary eutectic and both interstitial points in the Al-rich corner of the Al-Si-Sm ternary system, the temperatures for each reaction were determined. (orig.)

Evaluation of the biological and scanning distribution of hydroxyapatite-153Sm radiotherapeutic agent

International Nuclear Information System (INIS)

Herrera, J.; Paredes, N.; Portilla, A.; Miranda, J.; Carrillo, D.

1999-01-01

Fixation of 153 Sm labeled hydroxyapatite (HA) in the synovial capsule and extra articular localization were evaluated by means of biological distribution tests and gamma scanning studies. These were carried out using HA- 153 Sm with particle size ranging between 5 and μm, and radiochemical purity above 99%. Animal models used were wistar rats and new zealand rabbits. Rabbits were injected with 7,4 MBq of HA- 153 Sm while rats received between 1,85 and 92,6 MBq of HA- 153 Sm. In both cases injection was given in the intra articular area. After injection, scanning images were obtained in rabbits on the 1 st , 3 rd and 7 st day and in rats on the 2 nd and 7 th day. Biological distribution studies are conducted in the 2 hours to 9 days range in rats and one the 7 th day in rabbits. No extra articular localization of HA- 153 Sm was found in scanning conducted on rabbits by the 1 st , 3 rd and 7 st day after injection, neither on rats by the 2 nd and 7 th day. Biological distributions for rabbits and rats show localization above 99% in the intra articular area, during the evaluated periods of time. The evaluations of the biological distribution and the scintigraphic images show that fixation of HA- 153 Sm in the synovial capsule up to the 9 th day is very high

Synthesis and physicochemical analysis of Sm (II, III) acetylacetone chelate complexes

International Nuclear Information System (INIS)

Kostyuk, N.N.; Dik, T.A.; Trebnikov, A.G.

2004-01-01

Sm (II, III) acetylacetone chelate complexes were synthesized by electrochemical method. It was shown that anode dissolution of the metal samarium over acetylacetone leads to formation of the Sm (II, III) chelate complexes: xSm(acac)2 · ySm(acac)3 · zH(acac). Factors x, y and z depend on quantity of the electricity, which flew through the electrolysis cell. The compositions of the obtained substances were confirmed by the physicochemical analysis (ultimate analysis, IR-, mass spectroscopy and thermal analysis (thermogravimetric, isothermal warming-up and differential scanning colorimetry). (Authors)

Luminescent Enhancement of Na+ and Sm3+ Co-doping Reddish Orange SrCa3Si2O8 Phosphors

Science.gov (United States)

Chun, Fengjun; Zhang, Binbin; Li, Wen; Liu, Honggang; Deng, Wen; Chu, Xiang; Osman, Hanan; Zhang, Haitao; Yang, Weiqing

2018-04-01

Reddish orange SrCa3Si2O8 phosphors, prepared by the facile solid state reaction method, are a luminescent enhancement of Na+ and Sm3+ co-doping luminescent material. Na+ was designed to compensate the charge imbalance of Sm3+ ion substituting for the Sr2+ ion of orthorhombic SrCa3Si2O8 crystals. The results suggest that Na+ can effectively enhance the luminescent intensity of the reddish orange light peaked at about 562 nm (4 G 5/2 → 6 H 5/2), 600 nm (4 G 5/2 → 6 H 7/2) and 645 nm (4 G 5/2 → 6 H 9/2) excited by the near ultraviolet excited light 404 nm (4 L 13/2 → 6 H 5/2). The energy transfer has been further verified by the florescence lifetime. Additionally, the luminescent lifetime τ of as-grown phosphors was separated into two parts, a rapid lifetime and a slow lifetime. The average lifetime results ranged from 2.098 to 1.329 ms which were influenced by the concentration of Sm3+ doping. The systematic researches of as-grown phosphors have clearly suggested a potential application for white-light-emitting diodes ( w-LEDs).

Arsenate reduction and methylation in the cells of Trichoderma asperellum SM-12F1, Penicillium janthinellum SM-12F4, and Fusarium oxysporum CZ-8F1 investigated with X-ray absorption near edge structure

Energy Technology Data Exchange (ETDEWEB)

Su, S.M., E-mail: shimingsu@163.com [Institute of Environment and Sustainable Development in Agriculture, Chinese Academy of Agricultural Sciences/Key Laboratory of Agro-Environment, Ministry of Agriculture, Beijing (China); Zeng, X.B., E-mail: zengxb@ieda.org.cn [Institute of Environment and Sustainable Development in Agriculture, Chinese Academy of Agricultural Sciences/Key Laboratory of Agro-Environment, Ministry of Agriculture, Beijing (China); Li, L.F.; Duan, R.; Bai, L.Y. [Institute of Environment and Sustainable Development in Agriculture, Chinese Academy of Agricultural Sciences/Key Laboratory of Agro-Environment, Ministry of Agriculture, Beijing (China); Li, A.G.; Wang, J.; Jiang, S. [Shanghai Synchrotron Radiation Facility, Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai (China)

2012-12-15

Highlights: Black-Right-Pointing-Pointer Three fungal strains are capable of As(V) reduction and methylation. Black-Right-Pointing-Pointer As(V) reduction might be more easily processed than the methylation in fungal cells. Black-Right-Pointing-Pointer As sequestration and speciation transformation might be the detoxification processes. - Abstract: Synchrotron radiation-based X-ray absorption near edge structure (XANES) was introduced to directly analysis chemical species of arsenic (As) in the cells of Trichoderma asperellum SM-12F1, Penicillium janthinellum SM-12F4, and Fusarium oxysporum CZ-8F1 capable of As accumulation and volatilisation. After exposure to As(V) of 500 mg L{sup -1} for 15 days, a total of 60.5% and 65.3% of the accumulated As in the cells of T. asperellum SM-12F1 and P. janthinellum SM-12F4, respectively, was As(III), followed by 31.3% and 32.4% DMA (dimethylarsinic acid), 8.3% and 2.3% MMA (monomethylarsonic acid), respectively. However, for F. oxysporum CZ-8F1, 54.5% of the accumulated As was As(III), followed by 37.8% MMA and 7.7% As(V). The reduction and methylation of As(V) formed As(III), MMA, and DMA as the primacy products, and the reduction of As(V) might be more easily processed than the methylation. These results will help to understanding the mechanisms of As detoxification and its future application in bioremediation.

Arsenate reduction and methylation in the cells of Trichoderma asperellum SM-12F1, Penicillium janthinellum SM-12F4, and Fusarium oxysporum CZ-8F1 investigated with X-ray absorption near edge structure

International Nuclear Information System (INIS)

Su, S.M.; Zeng, X.B.; Li, L.F.; Duan, R.; Bai, L.Y.; Li, A.G.; Wang, J.; Jiang, S.

2012-01-01

Highlights: ► Three fungal strains are capable of As(V) reduction and methylation. ► As(V) reduction might be more easily processed than the methylation in fungal cells. ► As sequestration and speciation transformation might be the detoxification processes. - Abstract: Synchrotron radiation-based X-ray absorption near edge structure (XANES) was introduced to directly analysis chemical species of arsenic (As) in the cells of Trichoderma asperellum SM-12F1, Penicillium janthinellum SM-12F4, and Fusarium oxysporum CZ-8F1 capable of As accumulation and volatilisation. After exposure to As(V) of 500 mg L −1 for 15 days, a total of 60.5% and 65.3% of the accumulated As in the cells of T. asperellum SM-12F1 and P. janthinellum SM-12F4, respectively, was As(III), followed by 31.3% and 32.4% DMA (dimethylarsinic acid), 8.3% and 2.3% MMA (monomethylarsonic acid), respectively. However, for F. oxysporum CZ-8F1, 54.5% of the accumulated As was As(III), followed by 37.8% MMA and 7.7% As(V). The reduction and methylation of As(V) formed As(III), MMA, and DMA as the primacy products, and the reduction of As(V) might be more easily processed than the methylation. These results will help to understanding the mechanisms of As detoxification and its future application in bioremediation.

Site-selective laser spectroscopy of Sm{sup 3+} ions in Y{sub 4}Al{sub 2}O{sub 9}

Energy Technology Data Exchange (ETDEWEB)

Kaczkan, M., E-mail: m.kaczkan@elka.pw.edu.pl [Institute of Microelectronics and Optoelectronics, Koszykowa 75, Warsaw 00-662 (Poland); Boruc, Z. [Institute of Microelectronics and Optoelectronics, Koszykowa 75, Warsaw 00-662 (Poland); Turczyński, S.; Pawlak, D. [Institute of Electronic Materials Technology, Wolczynska 133, Warsaw 01-919 (Poland); Malinowski, M. [Institute of Microelectronics and Optoelectronics, Koszykowa 75, Warsaw 00-662 (Poland)

2016-02-15

Sm{sup 3+} doped Y{sub 4}Al{sub 2}O{sub 9} (YAM) crystals were prepared by the micro-pulling down method. Optical-absorption and laser-selective-excitation techniques along with luminescence decays have been used to reveal that Sm{sup 3+} ions in YAM normally occupy four sites, which were characterized and discussed. The comprehensive sets of Stark energy levels of the four Sm{sup 3+} centers in YAM were established. The intensity ratio of forced electric dipole ({sup 4}G{sub 5/2} → {sup 6}H{sub 9/2}) and magnetic dipole ({sup 4}G{sub 5/2} → {sup 6}H{sub 5/2}) transitions has been used to estimate the degree of asymmetry of Sm{sup 3+} sites. The lifetime of Sm{sup 3+} ions and the cross-relaxation rates were experimentally determined as a function of concentration for two distinct crystallographic Sm{sup 3+} centers. The dependencies of the nearest surroundings on the relaxation of the {sup 4}G{sub 5/2} excited state was discussed.

Effect of Zr addition on structure and electrical properties of SmFeO3 prepared by solid state reaction method

Directory of Open Access Journals (Sweden)

Abdalla M. Abdalla

2017-12-01

Full Text Available Series of Sm1-xFe1-3xZr3xO3 (SFZO, where x = 0.0, 0.01, 0.02, 0.033, 0.05, 0.1 and 0.15, was synthesised by the solid state reaction method and sintered at 1500 °C in air. X-ray diffraction (XRD and scanning electron microscopy (SEM were used to investigate the structure of the materials. The XRD results indicated that the pure SmFeO3 and Sm0.99Fe0.97Zr0.03O3 samples are single phase materials with an orthorhombic symmetry and Pbnm space group. The increase of Zr content (x ≥ 0.02 causes a phase change from single to two-phase system with orthorhombic (Pbnm and fluorite symmetry (Fm3m. The microstructural analyses showed that the Zr4+ doping resulted in an increase of porosity in the sintered SFZO compared to SmFeO3 sample. The direct current (DC electrical conductivity at 850 °C in air was found to be 0.045 S/cm and 0.007 S/cm for Sm0.99Fe0.97Zr0.03O3 and SmFeO3, respectively, showing a significant enhancement compared to the pure SmFeO3.

Growth and characterization of Sm3+ doped cerium oxalate single crystals

Directory of Open Access Journals (Sweden)

Minu Mary C

2016-07-01

Full Text Available Single crystals of Sm3+ doped cerium oxalate decahydrate were synthesized using single diffusion gel technique and the conditions influencing the size, morphology, nucleation density and quality of the crystals were optimized. Highly transparent single crystals of average size 3 mm × 2 mm × 1 mm with well-defined hexagonal morphology were grown during a time period of two weeks. X-ray powder diffraction analysis revealed that the grown crystals crystallize in the monoclinic system with space group P21/c as identical with the pure cerium oxalate. The various functional groups of the oxalate ligand and the water of crystallization were identified by Fourier transform infrared spectroscopy. The photoluminescence spectrum of the Sm3+ doped cerium oxalate indicated that the Sm3+ ions are optically active in the cerium oxalate matrix. The crystal has a strong and efficient orange red emission with a wavelength peak at 595 nm and hence can be effectively used for optical amplification. Microhardness measurements of the crystal revealed that they belong to the soft material category.

Preparation and luminescence properties of Ca3(VO4)2: Eu3+, Sm3+ phosphor for light-emitting diodes

International Nuclear Information System (INIS)

Huang Jiaping; Li Qiuxia; Chen Donghua

2010-01-01

Rare-earth ions co-activated red phosphors Ca 3 (VO 4 ) 2 : Eu 3+ , Sm 3+ were synthesized by modified solid-state reactions. The samples were characterized by X-ray powder diffractometer (XRD), energy-dispersive X-ray spectrometer (EDS), transmission electron microscopy (TEM) and luminescence spectrometer (LS). The results showed that the Eu-Sm system exhibits higher emission intensity than those of the Eu single-doped system and Sm separate-doped system under blue light. Samarium (III) ions are effective in broadening and strengthening absorptions around 467 nm. Furthermore, they exhibit enhanced luminescence emission. Luminescent measurements showed that the phosphors can be efficiently excited by ultraviolet (UV) to visible region, emitting a red light with a peak wavelength of 616 nm. The material has potential application as a phosphor for light-emitting diodes (LEDs).

Decay spectroscopy of 160Sm: The lightest four-quasiparticle K isomer

Directory of Open Access Journals (Sweden)

Z. Patel

2016-02-01

Full Text Available The decay of a new four-quasiparticle isomeric state in 160Sm has been observed using γ-ray spectroscopy at the RIBF, RIKEN. The four-quasiparticle state is assigned a 2π⊗2ν π52−[532], π52+[413], ν52−[523], ν72+[633] configuration. The half-life of this (11+ state is measured to be 1.8(4 μs. The (11+ isomer decays into a rotational band structure, based on a (6− ν52−[523]⊗ν72+[633] bandhead, consistent with the gK−gR values. This decays to a (5− two-proton quasiparticle state, which in turn decays to the ground state band. Potential energy surface and blocked-BCS calculations were performed in the deformed midshell region around 160Sm. They reveal a significant influence from β6 deformation and that 160Sm is the best candidate for the lightest four-quasiparticle K isomer to exist in this region. The relationship between reduced hindrance and isomer excitation energy for E1 transitions from multiquasiparticle states is considered with the new data from 160Sm. The E1 data are found to agree with the existing relationship for E2 transitions.

Surface properties of SmB{sub 6} from X-ray photoemission spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Heming, Nadine; Treske, Uwe; Knupfer, Martin; Koitzsch, Andreas [Institute for Solid State Research, IFW Dresden (Germany); Buechner, Bernd [Institute for Solid State Research, IFW Dresden (Germany); Institut fuer Festkoerperphysik, TU Dresden (Germany); Inosov, Dmytro [Institut fuer Festkoerperphysik, TU Dresden (Germany); Shitsevalova, Natalya Y.; Filipov, Volodymyr B. [Institute for Problems of Material Science, Kiev (Ukraine); Kraus, Stephan [BESSY II, Berlin (Germany)

2015-07-01

The mixed valence compound SmB{sub 6} has been well known for its anomalous low temperature resistivity behavior for decades: At temperatures below 50 K, SmB{sub 6} transmutes from a metal to an insulator but shows residual resistivity for temperatures less than 5 K. Renewed interest in this material comes from theoretical proposals, predicting topological protected surface states making this compound the prime candidate for the new material class of ''Topological Kondo Insulators''. Indeed, elaborate transport experiments have evidenced that the residual conductivity occurs only at the surface. However, it is generally well known that the surface of f-systems undergoes valence changes and reconstructions, which may also influence the surface properties of this material. Applying surface sensitive soft X-ray photoemission spectroscopy, we have investigated the surface properties of freshly cleaved SmB{sub 6} single crystals at 15 K monitoring the Sm valance, the chemical state of boron as well as the surface stoichiometry, and also the development of these over time and with increased temperature: We have found that the surface shows an unexpected complexity stemming from both intrinsic and extrinsic changes.

A Sm-Nd isotopic study of atmospheric dusts and particulates from major river systems

International Nuclear Information System (INIS)

Goldstein, S.L.; Cambridge Univ.; O'Nions, R.K.; Hamilton, P.J.

1984-01-01

143 Nd/ 144 Nd ratios, and Sm and Nd abundances, are reported for particulates from major and minor rivers of the Earth, continental sediments, and aeolian dusts collected over the Atlantic, Pacific, and Indian Oceans. Overall, Sm/Nd ratios and Nd isotopic compositions in contemporary continental erosion products vary within the small ranges of 147 Sm/ 144 Nd=0.115 +- 0.01 and 143 Nd/ 144 Nd=0.51204 +- 0.0002 (epsilonsub(Nd)=-11.4 +- 4). The average period of residence in the continental crust is estimated to be 1.70 +- 0.35 Ga. These results combined with data from the literature have implications for the age, history, and composition of the sedimentary mass and the continental crust: (1) The average 'crustal residence age' of the whole sedimentary mass is about 1.9 Ga. (2) The range of Nd isotope compositions in the continent derived particulate input to the oceans is the same as Atlantic sediments and seawater, but lower than those of the Pacific, demonstrating the importance of Pacific volcanism to Pacific Nd chemistry. (3) The average ratio of Sm/Nd is about 0.19 in the upper continental crust, and has remained so since the early Archean. This precludes the likelihood of major mafic to felsic or felsic to mafic trends in the overall composition of the upper continental crust through Earth history. (4) Sediments appear to be formed primarily by erosion of continental crust having similar Sm/Nd ratios, rather than by mixing of mafic and felsic compositions. (5) The average ratio of 143 Nd/ 144 Nd approx.= 0.5117 (epsilonsub(Nd) approx.= -17) in the upper continental crust, assuming its mean age is about 2 Ga. (6) The uniformity of the Sm-Nd isotopic systematics in river and aeolian particulates primarily reflects efficient recycling of old sediment by sedimentary processes on a short time scale compared to the amount of time the material has resided in the crust. (orig.)

The constitution of alloys in the Al-rich corner of the Al-Si-Sm ternary system

Energy Technology Data Exchange (ETDEWEB)

Markoli, B.; Spaic, S. [Ljubljana Univ. (Slovenia). Faculty of Natural Science and Engineering; Zupanic, F. [Maribor Univ. (Slovenia). Faculty of Mechanical Engineering

2001-09-01

The constitution of alloys and the liquidus surface in the Al-rich corner of the Al-Si-Sm ternary system were determined by the examination of controlled heated and cooled specimens, as well as heat-treated specimens by means of optical and scanning electron microscopy, energy-dispersive X-ray spectroscopy, differential thermal analysis and X-ray diffraction. The Al-rich corner of the Al-Si-Sm ternary system comprises five regions of primary crystallisation ({alpha}{sub Al}, {beta}{sub Si}, Al{sub 3}Sm, Al{sub 2}Si{sub 2}Sm and AlSiSm) with following characteristic invariant reaction sequences: ternary eutectic reaction L {yields} {alpha}{sub Al} + {beta}{sub Si} + Al{sub 2}Si{sub 2}Sm, and two liquidus transition reactions, i. e., L + Al{sub 3}Sm {yields} {alpha}{sub Al} + AlSiSm, and L + AlSiSm {yields} {alpha}{sub Al} + Al{sub 2}Si{sub 2}Sm. Along with the position of ternary eutectic and both interstitial points in the Al-rich corner of the Al-Si-Sm ternary system, the temperatures for each reaction were determined. (orig.)

Permanent magnets prepared from Sm{sub 10.5}Fe{sub 88.5}Zr{sub 1.0}N{sub y} without homogenization

Energy Technology Data Exchange (ETDEWEB)

Gebel, B.; Kubis, M.; Mueller, K.-H. [Institut fuer Festkoerper- und Werkstofforschung Dresden e.V. (Germany). Inst. fuer Metallische Werkstoffe

1997-10-01

In as-cast Sm{sub 2}Fe{sub 17} the high amount of {alpha}-Fe caused by a peritectic reaction can be considerably reduced by a small addition of about 1 at% Zr. X-ray diffraction showed that as-cast Sm{sub 10.5}Fe{sub 88.5}Zr{sub 1.0} mainly consists of a phase with the Th{sub 2}Zn{sub 17}-type structure and SmFe{sub 3}. Non-homogenized Sm{sub 10.5}Fe{sub 88.5}Zr{sub 1.0} was milled and (i) annealed in vacuum or (ii) treated with a hydrogenation-disproportionation-desorp tion-recombination (HDDR) process. The annealed and subsequently nitrogenated powder is magnetically anisotropic and has a coercivity {mu}{sub 0J}H{sub C} up to 2.0 T and an energy product (BH){sub max} up to 136 kJ/m{sup 3}. HDDR-treated and nitrogenated powder is isotropic and exhibits values of {mu}{sub 0J}H{sub C} = 3.1 T and (BH){sub max} 103 kJ/m{sup 3}. Consequently, Sm{sub 10.5}Fe{sub 88.5}Zr{sub 1.0}N{sub y} (y {approx} 16) permanent magnets with very good properties can be prepared without the time-consuming homogenization procedure. (orig.). 11 refs.

Intrinsic magnetic properties of Sm2Fe17-xMxNy/Cy (M=Al, Ga or Si)

International Nuclear Information System (INIS)

Kubis, M.; Eckert, D.; Gebel, B.; Mueller, K.-H.; Schultz, L.

2000-01-01

Curie temperature T c , saturation polarization J s and anisotropy field H a of Sm 2 Fe 17-x M x N y /C y with M=Al, Ga or Si (x≤3, y∼3) were determined by thermomagnetic measurements and a numerical fitting procedure of demagnetization curves. An increasing amount of the substitutional element M leads to an increase of T c of the Sm 2 Fe 17-x M x parent compounds and generally to a decrease of T c , J s and H a for the interstitial nitrides and carbides. However, for small M contents, x≤1, an increased H a was observed compared to the substitution-free interstitial compounds. Gas-carburized and melt-carburized Sm 2 Fe 15 Ga 2 C y samples showed large differences in J s and H a but identical T c values

Enhanced photoluminescence of Sm{sup 3+}/Bi{sup 3+} co-doped Gd{sub 2}O{sub 3} phosphors by combustion synthesis

Energy Technology Data Exchange (ETDEWEB)

Liu Guangsheng; Zhang Ying [Institute of Micro-system Physics, School of Physics and Electronics, Henan University, Kaifeng 475001 (China); Yin Jiang [Department of Physics, Nanjing University, Nanjing 210093 (China); Zhang, W.F. [Institute of Micro-system Physics, School of Physics and Electronics, Henan University, Kaifeng 475001 (China)], E-mail: wfzhang@henu.edu.cn

2008-12-15

Gd{sub 2}O{sub 3}:Sm{sup 3+} and Gd{sub 2}O{sub 3}:Sm{sup 3+},Bi{sup 3+} powders were prepared by a combustion method. Their structures were determined using X-ray diffraction. UV-visible absorption and photoluminescence spectra were investigated for Gd{sub 2}O{sub 3}:Sm{sup 3+} and Gd{sub 2}O{sub 3}:Sm{sup 3+},Bi{sup 3+} at different annealing temperatures and different doping concentrations. The emission spectra of all samples presented the characteristic emission narrow lines arising from the {sup 4}G{sub 5/2}{yields}{sup 6}H{sub J} transitions (J=5/2, 7/2, and 9/2) of Sm{sup 3+} ions upon excitation with UV irradiation. The emission intensity of Sm{sup 3+} ions was largely enhanced with introducing Bi{sup 3+} ions into Gd{sub 2}O{sub 3}:Sm{sup 3+} and the maximum occurred at a Bi{sup 3+} concentration of 0.5 mol%. The relevant mechanisms were discussed with the sensitization theory by Dexter and the aggregation behavior of Bi{sup 3+} ions.

Photoluminescence in Sm3+ doped Ba2P2O7 phosphor prepared by solution combustion method

Science.gov (United States)

Ghawade, Sonal P.; Deshmukh, Kavita A.; Dhoble, S. J.; Deshmukh, Abhay D.

2018-05-01

In this paper, Sm3+ doped Ba2P2O7 phosphors were synthesized via a Solution combustion method. The crystal structure of the phosphor was characterized by XRD. Orange-red emission was observed from these phosphors under near-ultraviolet (UV) excitation at 404 nm. The luminescence properties of the obtained phosphors were characterized by different techniques. The Ba2P2O7:Sm3+ phosphor can be efficiently excited by near-UV and blue light, and their emission spectrum consists of three emission peaks, at 564, 602, and 646 nm, respectively. Based on the results, the as prepared Ba2P2O7:Sm3+ phosphors are promising orange-red-emitting phosphors exhibit great potential may be applicable as a spectral convertor in c-Si solar cell to enhance the efficiency of solar cell in future.

SM*A*S*H (Standard Model*Axion*Seesaw*Higgs portal inflation)

International Nuclear Information System (INIS)

Ringwald, Andreas

2016-10-01

We present a minimal model for particle physics and cosmology. The Standard Model (SM) particle content is extended by three right-handed SM-singlet neutrinos N_i and a vector-like quark Q, all of them being charged under a global lepton number and Peccei-Quinn (PQ) U(1) symmetry which is spontaneously broken by the vacuum expectation value υ_σ∝10"1"1 GeV of a SM-singlet complex scalar field σ. Five fundamental problems - neutrino oscillations, baryogenesis, dark matter, inflation, strong CP problem - are solved at one stroke in this model, dubbed ''SM*A*S*H'' (Standard Model*Axion*Seesaw*Higgs portal inflation). It can be probed decisively by upcoming cosmic microwave background and axion dark matter experiments.

Electrochemical fabrication, microstructure and magnetic properties of Sm2Co17/Fe7Co3 dual phase nanocomposite

International Nuclear Information System (INIS)

Cui, Chunxiang; Chen, Fenghua; Yang, Wei; Li, Hongfang; Liu, Qiaozhi; Sun, Jibing

2015-01-01

By utilizing alternate electrochemical reaction, atomic migration and deposition of Fe, Co, Sm and other chemical substances in the electrochemical solution, a large number of Sm 2 Co 17 /Fe 7 Co 3 dual phase nanowire arrays were carried out in the anodic aluminum oxide (AAO) template with highly uniform and orderly. The Sm 2 Co 17 /Fe 7 Co 3 dual phase nanowire arrays with diameter of 50 nm and length of 12 μm have the smooth surface and uniform diameter. The morphology and microstructure of annealed Sm 2 Co 17 /Fe 7 Co 3 dual phase nanowires were observed and analyzed using SEM, TEM and HRTEM. Compared with single-phase nanowires, dual phase magnetic nanowires have higher coercivity and saturation magnetization. In this composite system, both the hard and the soft phases have a high Curie temperature, therefore, we believe that the Sm 2 Co 17 /Fe 7 Co 3 dual phase nanowire arrays is a new type of high-temperature magnetic composites. - Highlights: • Sm 2 Co 17 /Fe 7 Co 3 dual phase nanowires were prepared by electrochemical method. • The interface pinning is the main factor to improve anisotropy field of the nanowires. • The dual phase magnetic nanowires have higher coercivity and saturation magnetization

Brillouin spectroscopy with surface acoustic waves on intermediate valent, doped SmS

International Nuclear Information System (INIS)

Schaerer, U.; Jung, A.; Wachter, P.

1998-01-01

Brillouin scattering on surface acoustic waves is a very powerful tool to determine the elastic constants of intermediate valent crystals, since the method is non-destructive and no mechanical contact is needed. A strong evidence for intermediate valence is a negative value of Poisson's ratio, which describes the behavior of the volume under uniaxial pressure. SmS by itself makes a semiconductor-metal transition at a pressure of more than 6.5 kbar. When substituting the divalent Sm by a trivalent cation, like Y, La or Tm, SmS can become - depending on the doping concentration - intermediate valent without any applied, external pressure. In this work, we will present measurements of the velocities of the surface acoustic waves and the calculation of the elastic constants of La- and Tm-doped SmS compounds. We found a clear dependence of Poisson's ratio on the doping concentration and on the valence of the materials. Furthermore, we will discuss the mechanism leading to intermediate valence when substituting Sm. Besides the internal, chemical pressure, which is produced by the built in trivalent cations with their smaller ionic radii, we have clear evidence, that the free electrons in the 5d band, induced by the substituting atoms, also play an important role in making doped SmS intermediate valent. (orig.)

Electronic structure and equation of state of Sm2Co17 from first-principles DFT+ U

Science.gov (United States)

Huang, Patrick; Butch, Nicholas P.; Jeffries, Jason R.; McCall, Scott K.

2013-03-01

Rare-earth intermetallics have important applications as permanent magnet materials, and the rational optimization of their properties would benefit greatly from guidance from ab initio modeling. However, these systems are particularly challenging for current electronic structure methods. Here, we present an ab initio study of the prototype material Sm2Co17 and related compounds, using density functional theory with a Hubbard correction for the Sm 4 f-electrons (DFT+ U method) and ultrasoft pseudopotentials. The Hubbard U parameter is derived from first principles [Cococcioni and de Gironcoli, PRB 71, 035105 (2005)], not fit to experiment. Our calculations are in good agreement with recent photoemission measurements at ambient pressure and the equation of state up to 40 GPa, thus supporting the validity of our DFT+ U model. Prepared by LLNL under Contract DE-AC52-07NA27344.

Study on cellular survival adaptive response induced by low dose irradiation of 153Sm

International Nuclear Information System (INIS)

Zhu Shoupeng; Xiao Dong

1999-01-01

The present study engages in determining whether low dose irradiation of 153 Sm could cut down the responsiveness of cellular survival to subsequent high dose exposure of 153 Sm so as to make an inquiry into approach the protective action of adaptive response by second irradiation of 153 Sm. Experimental results indicate that for inductive low dose of radionuclide 153 Sm 3.7 kBq/ml irradiated beforehand to cells has obvious resistant effect in succession after high dose irradiation of 153 Sm 3.7 x 10 2 kBq/ml was observed. Cells exposed to low dose irradiation of 153 Sm become adapted and therefore the subsequent cellular survival rate induced by high dose of 153 Sm is sufficiently higher than high dose of 153 Sm merely. It is evident that cellular survival adaptive response could be induced by pure low dose irradiation of 153 Sm only

External exposure in radionuclide therapy with 153 Sm

Energy Technology Data Exchange (ETDEWEB)

Rezio, M.T.; Vieira, M.R. [Instituto Portugues Oncologia de Francisco Gentil, CROL, Lisboa (Portugal)

2006-07-01

Full text of publication follows: Aim: The radiopharmaceutical 153 Sm is an beta emitter used in metastatic bone pain palliation. The prescribed activity is 37 MBq/kg body weight.. The aim of this study is to measure the dose rate of the patients during 4 to 6 hours after 153 Sm - E.D.T.M.P. administration in order to prevent external exposure of nursing staff, family members and general public. Material and Methods: Twelve patients were treated with 153 Sm in our department. External exposure rates( {mu}Sv/h) at different times and at one meter were measured, with a Geiger-Muller detector. Results: The mean dose rate at one meter was 12 {mu}Sv/h, one hour after injection and 3{mu} Sv/h, 6 hours after injection. Conclusion: The policy in our department is to keep the patient in the hospital 4-6 h, due to the risk of contamination. Based on our results, the external exposure of the nursing staff, family members and the general public is very low, in agreement with other studies. (authors)

External exposure in radionuclide therapy with 153 Sm

International Nuclear Information System (INIS)

Rezio, M.T.; Vieira, M.R.

2006-01-01

Full text of publication follows: Aim: The radiopharmaceutical 153 Sm is an beta emitter used in metastatic bone pain palliation. The prescribed activity is 37 MBq/kg body weight.. The aim of this study is to measure the dose rate of the patients during 4 to 6 hours after 153 Sm - E.D.T.M.P. administration in order to prevent external exposure of nursing staff, family members and general public. Material and Methods: Twelve patients were treated with 153 Sm in our department. External exposure rates( μSv/h) at different times and at one meter were measured, with a Geiger-Muller detector. Results: The mean dose rate at one meter was 12 μSv/h, one hour after injection and 3μ Sv/h, 6 hours after injection. Conclusion: The policy in our department is to keep the patient in the hospital 4-6 h, due to the risk of contamination. Based on our results, the external exposure of the nursing staff, family members and the general public is very low, in agreement with other studies. (authors)

Crystal growth and optical properties of Sm:CaNb2O6 single crystal

International Nuclear Information System (INIS)

Di Juqing; Xu Xiaodong; Xia Changtai; Zeng Huidan; Cheng Yan; Li Dongzhen; Zhou Dahua; Wu Feng; Cheng Jimeng; Xu Jun

2012-01-01

Highlights: ► Sm:CaNb 2 O 6 single crystal was grown by the Czochralski method. ► Thermal expansion coefficients and J–O parameters were calculated. ► We found that this crystal had high quantum efficiency of 97%. - Abstract: Sm:CaNb 2 O 6 single crystal has been grown by the Czochralski method. Its high-temperature X-ray powder diffraction, optical absorption, emission spectroscopic as well as lifetime have been studied. Thermal expansion coefficients (α), J–O parameters (Ω i ), radiative lifetime (τ rad ), branching ratios (β) and stimulated emission cross-sections (σ e ) were calculated. The quantum efficiency (η) was calculated to be 97%. The intense peak emission cross section at 610, 658 nm were calculated to be 2.40 × 10 −21 , 2.42 × 10 −21 cm 2 . These results indicate that Sm:CaNb 2 O 6 crystal has potential use in visible laser and photonic devices area.

PVD Ti coatings on Sm-Co magnets

International Nuclear Information System (INIS)

Bovda, O.M.; Bovda, V.O.; Garkusha, I.E.; Leonov, S.O.; Onishchenko, L.V.; Tereshin, V.I.; Totrika, O.S.; Chen, C.H.

2008-01-01

The combination of conventional ion-plasma deposition (PVD) and pulsed plasma technologies (PPT) has been applied for rare-earth Sm-Co based magnets, to provide them with enhanced corrosion resistance. The influence of pulsed plasma treatment on Sm-Co magnets with deposited titanium PVD coatings has been investigated. It was revealed that thickness of modified layer significantly depends on the thickness of initial titanium film and plasma treatment regimes. As a result of plasma treatment with energy density of 30 J/cm 2 and pulse duration of ∼ 5 μs fine-grained layer with the thickness of 70 microns has been formed on the Sm-Co magnet with pure titanium film of 50 micron. According to SEM analyses considerable diffusion of titanium to the bulk of the magnet, on the depth of 20 microns, took place. Such reaction enhances strong bonding between the coating and the magnet

Structural and Magnetic Properties of Sm Implanted GaN

International Nuclear Information System (INIS)

Li-Juan, Jiang; Xiao-Liang, Wang; Hong-Ling, Xiao; Zhan-Guo, Wang; Chun, Feng; Ming-Lan, Zhang; Jian, Tang

2009-01-01

The structural and magnetic properties of Sm ion-implanted GaN with different Sm concentrations are investigated. XRD results do not show any peaks associated with second phase formation. Magnetic investigations performed by superconducting quantum interference device reveal ferromagnetic behavior with an ordering temperature above room temperature in all the implanted samples, while the effective magnetic moment per Sm obtained from saturation magnetization gives a much higher value than the atomic moment of Sm. These results could be explained by the phenomenological model proposed by Dhar et al. [Phys. Rev. Lett. 94(2005)037205, Phys. Rev. B 72(2005)245203] in terms of a long-range spin polarization of the GaN matrix by the Sm atoms. (condensed matter: electronicstructure, electrical, magnetic, and opticalproperties)

Moessbauer and channeling experiments on TeSi and SmSi

International Nuclear Information System (INIS)

Kemerink, G.J.; Boerma, D.O.; Waard, H. de; Wit, J.C. de; Drentje, S.A.

1980-01-01

Considerable effort is made to obtain an insight in the structural and electronic properties of ion implanted elemental semiconductors. This research is strongly stimulated by the many applications of semi-conductor devices. We report here on Moessbauer studies of 129 TeSi and 153 SmSi, using the 27.8 keV transition in 129 I and the 103.2 keV transition in 153 Eu, respectively, and on channeling experiments on 128 TeSi and 152 SmSi with a 2 MeV α-beam from the Groningen Van de Graaff generator. In the Moessbauer experiments we used Cu 129 I and EuF 3 .1/2H 2 O as absorber materials. Source and absorber were held at 4.2 K. The implantations were generally done at room temperature with an implantation energy of 100-115 keV. For the Moessbauer and channeling measurements we applied similar Si single crystals and the same implantation and annealing conditions. Crystals with low doses could only be investigated with the Moessbauer effect

Sorption of samarium in soils: influence of soil properties and Sm concentration

Energy Technology Data Exchange (ETDEWEB)

Ramirez-Guinart, Oriol; Salaberria, Aitor; Rigol, Anna; Vidal, Miquel [Analytical Chemistry department, Faculty of Chemistry, University of Barcelona, Marti i Franques 1-11, 08028, Barcelona (Spain)

2014-07-01

Due to the fact that barriers of Deep Geological Repositories (DGR) may lose efficiency before the radioisotopes present in the High Level Radioactive Waste (HLRW) completely decay, it is possible that, in the long-term, radioactive leachates may escape from the DGR and reach the soil and water compartments in the biosphere. Therefore, it is required to examine the interaction and mobility of radionuclides present in the HLRW, or their chemical analogues, to predict the impact of their eventual incorporation in the biosphere and to assess the derived risk. Although relevant data have been recently obtained for a few radionuclides in soils, there are still some important gaps for some radionuclides, such us for samarium (Sm). Sm is a lanthanide that, besides being considered as a natural analogue of actinides, may also be present in HLRW in the form of the radioactive isotope {sup 151}Sm. The main objective of this work was to obtain sorption data (K{sub d}) of {sup 151}Sm gathered from a set of soil samples physicochemical fully-characterized (pH, texture, cationic exchange capacity, soil solution cationic composition, organic matter, carbonate and metallic oxides content, etc.). Additionally, as an alternative for testing sorption capacity of radionuclides in soils is the use of the corresponding stable isotope or a chemical analogue, the influence of Sm concentration was also checked. To evaluate {sup 151}Sm sorption, batch assays were carried out for each soil sample, which consisted in a pre-equilibration step of 2 g of each soil with 50 ml of double deionised water, and a subsequent equilibration step with the same solution, but labelled with {sup 151}Sm. The activity of {sup 151}Sm in initial and final solutions was measured by liquid scintillation and K{sub d} ({sup 151}Sm) data were calculated. The reversibly sorbed fraction was estimated by the application of a single extraction test, with double deionised water, to soil residues coming from the previous

Systematic analysis of DEMETER-like DNA glycosylase genes shows lineage-specific Smi-miR7972 involved in SmDML1 regulation in Salvia miltiorrhiza.

Science.gov (United States)

Li, Jiang; Li, Caili; Lu, Shanfa

2018-05-08

DEMETER-like DNA glycosylases (DMLs) initiate the base excision repair-dependent DNA demethylation to regulate a wide range of biological processes in plants. Six putative SmDML genes, termed SmDML1-SmDML6, were identified from the genome of S. miltiorrhiza, an emerging model plant for Traditional Chinese Medicine (TCM) studies. Integrated analysis of gene structures, sequence features, conserved domains and motifs, phylogenetic analysis and differential expression showed the conservation and divergence of SmDMLs. SmDML1, SmDML2 and SmDML4 were significantly down-regulated by the treatment of 5Aza-dC, a general DNA methylation inhibitor, suggesting involvement of SmDMLs in genome DNA methylation change. SmDML1 was predicted and experimentally validated to be target of Smi-miR7972. Computational analysis of forty whole genome sequences and almost all of RNA-seq data from Lamiids revealed that MIR7972s were only distributed in some plants of the three orders, including Lamiales, Solanales and Boraginales, and the number of MIR7972 genes varied among species. It suggests that MIR7972 genes underwent expansion and loss during the evolution of some Lamiids species. Phylogenetic analysis of MIR7972s showed closer evolutionary relationships between MIR7972s in Boraginales and Solanales in comparison with Lamiales. These results provide a valuable resource for elucidating DNA demethylation mechanism in S. miltiorrhiza.

Tailoring the luminescence properties of Y_2O_3:Sm"3"+ nanophosphors by 6 MeV electron beam irradiation

International Nuclear Information System (INIS)

Sunitha, D.V.; Nagabhushana, H.; Hareesh, K.; Bhoraskar, V.N.; Dhole, S.D.

2017-01-01

Sm"3"+ (3 mol%) ions doped Y_2O_3 nanophosphors were synthesized by green synthesis route using Aloe Vera gel as fuel. The final product was irradiated by 6 MeV electron beam (E-beam) to different fluences in the range (2–10 × 10"1"3 e"− cm"−"2) and well characterized. Powder X-ray Diffractogram (PXRD) results revealed the loss of crystalline nature due to lattice disorder created during irradiation. Fourier Transform Infrared (FTIR) spectroscopic results showed absorption peaks around 688–843 cm"−"1 (Y-O bond), 1076 and 1398 cm"−"1 (C-O bond), 1505–1765 cm"−"1 and 3498 cm"−"1 (O-H bond). Scanning Electron Microscopic (SEM) images showed flake like morphological features. The Photoluminescence (PL) emission spectrum recorded at 407 nm excitation showed magnetic and electric dipole transitions at ∼569–575 ("4G_5_/_2 → "6H_5_/_2), ∼607–623 ("4G_5_/_2 → "6H_7_/_2) and ∼655–668 nm ("4G_5_/_2 → "6H_9_/_2) respectively. Thermoluminescence (TL) glow curve consists of three peaks in E-beam irradiated nanophosphors at 158, 243 and 352 °C due to creation of more number of trapping and luminescent centers. The E-beam irradiated Y_2O_3:Sm"3"+ nanophosphors showed strong PL emission with color co-ordinate values lying in the orange-red region. Therefore, this material can be potentially used as a red component in WLEDs (White LEDs). - Highlights: • Y_2O_3:Sm"3"+ nanophosphor was synthesized by solution combustion technique using Aloe Vera gel as a fuel. • Y_2O_3:Sm"3"+ nanophosphor was irradiated with 6 MeV E-beam in the fluence range 2–10 × 10"1"3e"− cm"−"2. • The size of the particle decreases and surface area increases with increase in E-beam fluence. • The E-beam irradiated Y_2O_3:Sm"3"+ nanophosphors PL intensity increases and CIE coordinate values moves towards red region indicating the potential usage of this phosphor for LED applications.

Analysis of the magnetic anisotropy in SmCo5 and GdCo5

International Nuclear Information System (INIS)

Zhao, T.; Jin, H.; Groessinger, R.; Kou, X.; Kirchmayr, H.R.

1991-01-01

The temperature dependence of the magnetic anisotropy constant K 1 for SmCo 5 and GdCo 5 is well reproduced by calculations based on a single-ion model taking into account the anisotropies of the R--Co exchange interaction and the Co-sublattice magnetic moment. The anisotropy of the R--Co exchange interaction plays an important role in reproducing the experimental K 1 (T) for SmCo 5 and GdCo 5 . It is found that the absolute value of the second order crystalline electric field parameter A 0 2 in SmCo 5 decreases monotonically with increasing temperature

Synthesis by two methods and crystal structure determination of a new pyrochlore-related compound Sm{sub 2}FeTaO{sub 7}

Energy Technology Data Exchange (ETDEWEB)

Torres-Martinez, Leticia M., E-mail: lettorresg@yahoo.com [Departamento de Ecomateriales y Energia, Facultad de Ingenieria Civil, Universidad Autonoma de Nuevo Leon, Cd. Universitaria, San Nicolas de los Garza, Nuevo Leon 66450 (Mexico); Ruiz-Gomez, Miguel A. [Departamento de Ecomateriales y Energia, Facultad de Ingenieria Civil, Universidad Autonoma de Nuevo Leon, Cd. Universitaria, San Nicolas de los Garza, Nuevo Leon 66450 (Mexico); Facultad de Ciencias Quimicas, Universidad Autonoma de San Luis Potosi, Av. Manuel Nava 6, San Luis Potosi, S.L.P. 78290 (Mexico); Figueroa-Torres, M.Z.; Juarez-Ramirez, Isaias [Departamento de Ecomateriales y Energia, Facultad de Ingenieria Civil, Universidad Autonoma de Nuevo Leon, Cd. Universitaria, San Nicolas de los Garza, Nuevo Leon 66450 (Mexico); Moctezuma, Edgar [Facultad de Ciencias Quimicas, Universidad Autonoma de San Luis Potosi, Av. Manuel Nava 6, San Luis Potosi, S.L.P. 78290 (Mexico); and others

2012-04-16

Graphical abstract: The monoclinic (space group C2/c) structure of a new compound, Sm{sub 2}FeTaO{sub 7} shows an alternating Sm-O and Fe/Ta-O layers. In the Fe/Ta-O layer, Fe/Ta1 and Fe/Ta3 cations are coordinated by six oxygen atoms, forming irregular octahedral interconnected into a hexagonal tungsten bronze (HTB) type network. The HTB layer is a fundamental framework in the pyrohlore-related structure. Highlights: Black-Right-Pointing-Pointer Pyrochlore-related compound Sm{sub 2}FeTaO{sub 7} prepared by solid state reaction and sol-gel. Black-Right-Pointing-Pointer Sm{sub 2}FeTaO{sub 7} crystallizes with a monoclinic crystal structure and space group C2/c. Black-Right-Pointing-Pointer The compound is synthesized by sol-gel at lower temperature and time than solid state. Black-Right-Pointing-Pointer Surface area of sol-gel Sm{sub 2}FeTaO{sub 7} is 10 times higher than that prepared by solid state. - Abstract: This paper reports on the synthesis of a new pyrochlore-related compound Sm{sub 2}FeTaO{sub 7} by both solid state reaction and sol-gel synthesis routes. Structural features were determined by X-ray powder diffraction and Rietveld refinement and were corroborated using Transmission Electron Microscopy (TEM). The results revealed that Sm{sub 2}FeTaO{sub 7} crystallized in the monoclinic system with space group C2/c and the following cell parameters: a = 13.1307(5) Angstrom-Sign , b = 7.5854(3) Angstrom-Sign , c = 11.6425(4) Angstrom-Sign and {beta} = 100.971(2) Degree-Sign . The monoclinic structure of Sm{sub 2}FeTaO{sub 7} showed an arrangement of alternating Sm-O and Fe/Ta-O layers and two types of irregular octahedra of Fe/Ta-O, which are interconnected into a hexagonal tungsten bronze (HTB)-type network. On the other hand, Sm{sub 2}FeTaO{sub 7} prepared by sol-gel was obtained with lower particle sizes than the solid state produced compound. The difference in particle size causes a difference of one order of magnitude in the specific surface area. In

Thermodynamics of the (Sm{sub 2}Fe{sub 17-x}Ga{sub x}+H{sub 2}) system

Energy Technology Data Exchange (ETDEWEB)

Kubis, M.; Handstein, A.; Gebel, B.; Gutfleisch, O.; Mueller, K.H.; Schultz, L. [Institut fuer Festkoerper- und Werkstofforschung Dresden e.V. (Germany). Inst. fuer Metallische Werkstoffe

2000-08-10

Sm{sub 2}Fe{sub 17-x}Ga{sub x} samples (with x=0, 0.5, 1, and 2) were disproportionated into SmH{sub 2} and {alpha}-(Fe,Ga) by heating the samples in 4 MPa hydrogen up to 650 C. It was possible to disproportionate even the more stable compounds with a higher Ga content under these conditions. The recombination into the original 2:17 phase was carried out by annealing in low hydrogen pressures of 2.5, 12 and 60 kPa. The values of the hydride formation enthalpy, {delta}H, and of the change of entropy, {delta}S, for the Sm{sub 2}Fe{sub 17-x}Ga{sub x} compounds were obtained by using the Van't Hoff relation. It was found that the negative {delta}H increases monotonically from 141 to 229 kJ/mol H{sub 2} and the negative {delta}S increases monotonically from 112 to 258 J/Kmol H{sub 2} for x=0 to x=2, respectively. These results show that the higher stability for the compounds with increasing Ga content is mainly attributed to the increasing negative change of entropy -{delta}S and not, as expected before, to a decrease of -{delta}H. (orig.)

Structure and magnetic properties of Sm{sub 2}Rh{sub 3}Sn{sub 5}. An intergrowth of TiNiSi- and NdRh{sub 2}Sn{sub 4}-related slabs

Energy Technology Data Exchange (ETDEWEB)

Heying, Birgit; Koesters, Jutta; Hoffmann, Rolf-Dieter; Heletta, Lukas; Poettgen, Rainer [Muenster Univ. (Germany). Inst. fuer Anorganische und Analytische Chemie

2017-07-01

The stannide Sm{sub 2}Rh{sub 3}Sn{sub 5} was obtained by arc-melting of the elements and subsequent annealing at 1070 K in a silica tube. Sm{sub 2}Rh{sub 3}Sn{sub 5} crystallizes with the orthorhombic Y{sub 2}Rh{sub 3}Sn{sub 5} type structure, space group Cmc2{sub 1}, Z=4: a=444.46(8), b=2636.2(4), c=718.3(1) pm, wR=0.0711, 1761 F{sup 2} values and 61 variables. The three crystallographically independent rhodium atoms show tricapped trigonal prismatic coordination by samarium and tin atoms. Sm{sub 2}Rh{sub 3}Sn{sub 5} can be considered as a simple 1:1 intergrowth structure of TiNiSi- and NdRh{sub 2}Sn{sub 4}-related slabs of compositions SmRhSn and SmRh{sub 2}Sn{sub 4}. Temperature dependent magnetic susceptibility data revealed van Vleck type behavior caused by the proximity of the exited {sup 6}H{sub 7/2} state to the {sup 6}H{sub 5/2} ground state of Sm{sup 3+}, and an antiferromagnetic ordering occurs at T{sub N}=3.5(5) K.

Preparation of Sm2Fe17-xGaxNy/Cy magnets by a hydrogenation-disproportionation-desorption-recombination process

International Nuclear Information System (INIS)

Kubis, M.; Cao, L.; Handstein, A.; Gebel, B.; Mueller, K.; Schultz, L.

1997-01-01

A hydrogenation-disproportionation-desorption-recombination process (HDDR) was applied to Sm 2 Fe 17-x Ga x (x=0.5, 1, and 2). The process was studied by means of temperature-pressure analysis, x-ray diffraction and scanning electron microscopy. It was shown that Ga not only stabilizes the interstitially modified compounds Sm 2 Fe 17-x Ga x C y (0 2 Fe 17-x Ga x against the disproportionation by hydrogen. Therefore, only for x=0.5 can a nearly complete HDDR be performed. The HDDR-treated and subsequently nitrogenated or carburized samples show coercivities μ 0J H C up to 3.1 T and 2.5 T, respectively. Hot compaction increases the density of the Sm 2 Fe 16.5 Ga 0.5 C y powder; however, it leads to a loss of coercivity due to decomposition into α-iron and samarium carbides. copyright 1997 American Institute of Physics

Symmetries for SM Alignment in multi-Higgs Doublet Models

CERN Document Server

Pilaftsis, Apostolos

2016-01-01

We derive the complete set of maximal symmetries for Standard Model (SM) alignment that may occur in the tree-level scalar potential of multi-Higgs Doublet Models, with $n > 2$ Higgs doublets. Our results generalize the symmetries of SM alignment, without decoupling of large mass scales or fine-tuning, previously obtained in the context of two-Higgs Doublet Models.

Ferromagnetic behavior in linear charge-transfer complexes. Structural and magnetic characterization of octamethylferrocene salts: (Fe(C sub 5 Me sub 4 H) sub 2 ) sup sm bullet + (A) sup sm bullet minus (A = TCNE, TCNQ)

Energy Technology Data Exchange (ETDEWEB)

Miller, J.S.; Glatzhofer, D.T.; O' Hare, D.M. (E.I. de Pont de Nemours and Co., Inc., Wilmington, DE (USA)); Reiff, W.M. (Northeastern Univ., Boston, MA (USA)); Chakraborty, A.; Epstein, A.J. (Ohio Sate Univ., Columbus (USA))

1989-07-26

The reaction of Fe{sup II}({eta}{sup 5}-C{sub 5}Me{sub 4}H){sub 2} with cyano acceptors A (A = TCNE (tetracyanoethylene), TCNQ (7,7,8,8-tetracyano-p-quanodimethane), n-C{sub 4}(CN){sub 6} (n-hexacyanobutadiene), C{sub 6}(CN){sub 6} (tris(dicyanomethylene)cyclopropane), DDQ (2,3-dichloro-5,6-dicyanobenzoquinone), TCNQF{sub 4} (perfluoro-7,7,8,8-tetracyano-p-quinodimethane) results in formation of 1:1 charge-transfer salts of (Fe{sup III})(C{sub 5}Me{sub 4}H){sub 2}){sup {sm bullet}+}(A){sup {sm bullet}{minus}} composition. The TCNE and TCNQ complexes have been structurally characterized. The high-temperature magnetic susceptibility for polycrystalline samples of these complexes can be fit by the Curie-Qeiss law, {chi} = C(T-{theta}){sup {minus}1}, with {theta} = +0.5 {plus minus} 2.2 K, and {mu}{sub eff} ranges from 2.71 to 3.97 {mu}{sub B}, suggesting that the polycrystalline samples measured had varying degrees of orientation. The 7.0 K EPR spectrum of the radical cation exhibits an axially symmetric powder pattern with g{sub {parallel}} = 4.11 and g{sub {perpendicular}} = 1.42, and the EPR parameters are essentially identical with those reported for ferrocenium and decamethylferrocenium. No EPR spectrum is observed at 78 K. Akin to the (Fe(C{sub 5}Me{sub 5}){sub 2}){sup {sm bullet}+} salts, these salts have {sup 57}Fe Moessbauer spectra consistent with complete charge transfer; however, unlike the case for the former complexes, quadrupole splittings of 0.30 and 0.220 mm/s are observed at 4.8 and 298 K, respectively. The absence of strong interionic magnetic coupling for the (Fe(C{sub 5}Me{sub 4}H){sub 2}){sup {sm bullet}+} salts contrasts with the behavior of the (Fe(C{sub 5}Me{sub 5}){sub 2}){sup {sm bullet}+} salts. 26 refs., 13 figs., 8 tabs.

Chilean experience in production of therapeutic radiopharmaceuticals labelled with 153Sm and 166Ho

International Nuclear Information System (INIS)

Chandia, M.; Gil, M.G.; Tomicic, M.; Araya, G.; Olea, E.; Chong, G.

1998-01-01

153 Samarium ( 153 Sm) and 166 Holmium ( 166 Ho) were produced at the Nuclear Center of La Reina Research Reactor, Chilean Nuclear Energy Commission. 153 Sm-EDTMP (Ethylenediaminetetramethylene Phosphonate) used for clinical trial of therapy for painful skeletal metastases and labeled particles such as 166 Ho-FHMA (ferric hydroxide macroagregattes) and 153 Sm-HAP (hydroxiapatite particles) used for radiation synevectomy, were labeled. Radionuclide purity of both radionuclides was analyzed by gamma spectrometry using a multichannel gamma spectrometer. Radiochemical labeled reaction parameters of 153 Sm-EDTMP such as: Sm/EDTMP molar ratio, 153 Sm specific activity, labeled pH and temperature, were determined in order to get high radiolabeling yields. Radiochemical Quality Controls of 153 Sm-EDTMP using different chromatographic systems were carried out in order to determine labeling yields. Bodistribution studies were achieved in mice by dissection of animals and by autoradiography of histological slices in rats, after 2h post injection. 153 Sm-HAP and 166 Ho-FHMA labeled particles were prepared using the methods described. Radiochemical purity, in case of radiolabeled particles was carried out by centrifugation, measuring activity in the supernatant and in particles pellet. Physical parameters, such as particle size and range of the radiopharmaceuticals based on particles labeling were evaluated in order to determine the ideal conditions to obtain particles size range between 10 - 40μ. In vitro labeling stability for over seven days and wash out activity by incubation in human synovial fluid after 6 and 24h post labeling, was also studied. 153 Sm-EDTMP was easily labeled with a Radiochemical purity over 99.5% and stable for over 7 days. Biodistribution studies in mice give more than 50% of ID uptake in bone and less than 0,1% in liver this was correlated by autoradiographic image. 153 Sm-HAP and 166 Ho-FHMA were also labeling obtaining radiochemical purity over 95

Sm-Nd isochrone of 2,1 Ga in ores of two samples from Santa Maria Chico Granulite Complex

International Nuclear Information System (INIS)

Hartmann, L.A.

1987-01-01

Sm and Nd isotopes were determined on garnet and plagioclasse from a metapelite and on garnet and clinopyroxene from a mafic gneiss. The age of this metamorphic event in the Santa Maria Chico Granulite Complex is 2.1 Ga. The age of generaion of the protoliths is 2.6 Ga, as determined on total rock samples. (author) [pt

Enhanced solar light photodegradation of brilliant black bis-azo dye in aqueous solution by F, Sm3+ codoped TiO2

Science.gov (United States)

Mukonza, Sabastian S.; Nxumalo, Edward N.; Mamba, Bhekie B.; Mishra, Ajay K.

2017-05-01

This research focuses on improving the photocatalytic efficiency of TiO2 during the photo-mineralisation of brilliant black (BN) bis-azo dye pollutant in aqueous solution. This was achieved by improving the visible light activity of TiO2 photocatalyst semiconductor through co-doping of fluorine (F) and trivalent samarium ions (Sm3+) into a TiO2 matrix using a modified sol-gel synthesis method. Structural, morphological, and textural properties were evaluated using ultra-violet /visible spectroscopy (UV-visible), Raman spectroscopy, scanning electron microscopy coupled to energy dispersive X-ray spectroscopy (SEM/EDX) and X-ray diffraction spectroscopy (XRD). Photocatalytic and degradation efficiencies were assessed by decolourisation of BN dye in aqueous solution. Complete degradation of BN was attained after an irradiation time of 3 h using F, Sm3+-TiO2 (0.6% Sm3+) compared to 73.4% achieved using pristine TiO2. Pseudo first order kinetics rate constants (Ka) were 2.73×10-2 and 6.6×10-3 min-1 for Sm3+-TiO2 (0.6%Sm3+) and pristine TiO2, respectively, which translates to a remarkably high enhancement factor of 4. The results obtained established that doping of TiO2 by F and Sm3+ enhances the photocatalytic performance of TiO2 during solar light radiation which enables the utilisation of freely available and clean solar energy.

Synthesis of Methylenebicyclo[3.2.1]octanol by a Sm(II)-Induced 1,2-Rearrangement Reaction with Ring Expansion of Methylenebicyclo[4.2.0]octanone.

Science.gov (United States)

Takatori, Kazuhiko; Ota, Shoya; Tendo, Kenta; Matsunaga, Kazuma; Nagasawa, Kokoro; Watanabe, Shinya; Kishida, Atsushi; Kogen, Hiroshi; Nagaoka, Hiroto

2017-07-21

Direct conversion of methylenebicyclo[4.2.0]octanone to methylenebicyclo[3.2.1]octanol by a Sm(II)-induced 1,2-rearrangement with ring expansion of the methylenecyclobutane is described. Three conditions were optimized to allow the adaptation of this approach to various substrates. A rearrangement mechanism is proposed involving the generation of a ketyl radical and cyclopentanation by ketyl-olefin cyclization, followed by radical fragmentation and subsequent protonation.

Synthesis and DNA interaction of a Sm(III) complex of a Schiff base ...

African Journals Online (AJOL)

The interaction between the Sm(III) complex of an ionic Schiff base [HL]-, derived from vanillin and L-tryptophan, and herring sperm DNA at physiological pH (7.40) has been studied by UV-Vis absorption, fluorescence and viscosity methods. The binding ratios nSm(III) : nK[HL] = 1:1 and nSm(III)L: nDNA =5:1 were confirmed ...

CDCC calculations of fusion of 6Li with targets 144Sm and 154Sm: effect of resonance states

Science.gov (United States)

Gómez Camacho, A.; Lubian, J.; Zhang, H. Q.; Zhou, Shan-Gui

2017-12-01

Continuum Discretized Coupled-Channel (CDCC) model calculations of total, complete and incomplete fusion cross sections for reactions of the weakly bound 6Li with 144,154Sm targets at energies around the Coulomb barrier are presented. In the cluster structure frame of 6Li→α+d, short-range absorption potentials are considered for the interactions between the ground state of the projectile 6Li and α-d fragments with the target. In order to separately calculate complete and incomplete fusion and to reduce double-counting, the corresponding absorption potentials are chosen to be of different range. Couplings to low-lying excited states 2+, 3- of 144Sm and 2+, 4+ of 154Sm are included. So, the effect on total fusion from the excited states of the target is investigated. Similarly, the effect on fusion due to couplings to resonance breakup states of 6Li, namely, l=2, J π =3+,2+,1+ is also calculated. The latter effect is determined by using two approaches, (a) by considering only resonance state couplings and (b) by omitting these states from the full discretized energy space. Among other things, it is found that both resonance and non-resonance continuum breakup couplings produce fusion suppression at all the energies considered. A. Gómez Camacho from CONACYT, México, J. Lubian from CNPq, FAPERJ, Pronex, Brazil. S.G.Z was partly supported by the NSF of China (11120101005, 11275248, 11525524, 11621131001, 11647601, 11711540016), 973 Program of China (2013CB834400) and the Key Research Program of Frontier Sciences of CAS. H.Q.Z. from NSF China (11375266)

Investigations on optical properties of Sm{sup 3+} ion doped boro-phosphate glasses

Energy Technology Data Exchange (ETDEWEB)

Vijayakumar, R.; Suthanthirakumar, P.; Karthikeyan, P.; Marimuthu, K., E-mail: mari-ram2000@yahoo.com [Department of Physics, Gandhigram Rural Institute – Deemed University, Gandhigram – 624302 (India)

2015-06-24

The Sm{sup 3+} doped Boro-phosphate glasses with the chemical composition 60H{sub 3}BO{sub 3}+20Li{sub 2}CO{sub 3}+10ZnO+(10−x) H{sub 6}NO{sub 4}P+xSm{sub 2}O{sub 3} (where x= 0.1, 0.5, 1 and 2 in wt%) have been prepared by melt quenching technique. The prepared glasses were characterized through optical absorption and luminescence spectral measurements. The band gap energies corresponding to the direct and indirect allowed transitions and the Urbach’s energy values were estimated from the absorption spectra. Judd-Ofelt intensity parameters have been derived to predict the radiative properties of the various emission transitions. In order to identify the emission color of the prepared glasses, the emission intensities were analyzed using CIE 1931 color chromaticity diagram. The energy transfer process takes place between Sm{sup 3+}−Sm{sup 3+} ions through cross-relaxation mechanism have also been investigated and the results were discussed and reported.

Analysis of energy transfer based emission spectra of (Sm{sup 3+}, Dy{sup 3+}): Li{sub 2}O–LiF–B{sub 2}O{sub 3}–CdO glasses

Energy Technology Data Exchange (ETDEWEB)

Naresh, V., E-mail: varna.naresh@gmail.com; Buddhudu, S., E-mail: profsb_svuniv@hotmail.com

2014-03-15

The present paper brings out the results concerning the preparation and optical properties of Sm{sup 3+} and Dy{sup 3+} each ion separately in four different concentrations (0.1, 0.5, 1.0 and 1.5 mol%) and also together doped (1 mol% Dy{sup 3+}+x mol% Sm{sup 3+}): Li{sub 2}O–LiF–B{sub 2}O{sub 3}–CdO (where x=0.1, 0.5, 1.0 and 1.5 mol%) glasses by a melt quenching method. Sm{sup 3+} doped base glasses have displayed an intense orange emission at 602 nm ({sup 4}G{sub 5/2}→{sup 6}H{sub 7/2}) with an excitation at 403 nm and Dy{sup 3+} doped glasses have shown two emissions located at 486 nm ({sup 4}F{sub 9/2}→{sup 6}H{sub 15/2}; blue) and 577 nm ({sup 4}F{sub 9/2}→{sup 6}H{sub 13/2}; yellow) with λ{sub exci}=387 nm. The co-doped (Dy{sup 3+}+Sm{sup 3+}) lithium fluoro-boro cadmium glasses have been excited with an excitation at 387 nm of Dy{sup 3+} which has resulted in with a significant reduction in Dy{sup 3+} emission, at the same time there exists an increase in the reddish-orange emission of Sm{sup 3+} due to an energy transfer from Dy{sup 3+} to Sm{sup 3+}. The non-radiative energy transfer from Dy{sup 3+} to Sm{sup 3+} is governed by dipole–quadrupole interactions as is explained in terms of their emission spectra, donor lifetime, energy level diagram and energy transfer characteristic factors. -- Highlights: • In co-doped (Dy{sup 3+}+Sm{sup 3+}): LFBCd glass, reddish-orange emission due to Sm{sup 3+} ({sup 4}F{sub 9/2}→{sup 6}H{sub J}) has been enhanced due to an energy transfer from Dy{sup 3+} ions in the glass. • This has been evidenced from a lowering trend in the emission transition lifetimes of donor (Dy{sup 3+}) ions with increasing acceptor (Sm{sup 3+}) concentration. • Energy transfer mechanism involved in Dy{sup 3+}→Sm{sup 3+} has been explained in terms of I–H luminescence decay curve analysis.

Magnetic anisotropies in SmCo thin films

International Nuclear Information System (INIS)

Chen, K.

1993-01-01

A systemic study of the deposition processes and magnetic properties for the Sm-Co film system has been carried out. Films of Sm-Co system with various magnetic anisotropies have been synthesized through sputter deposition in both crystalline and amorphous phases. The origins of various anisotropies have been studied. Thermalized sputter deposition process control was used to synthesize Fe enriched Sm-Co films with rhombohedral Th 2 Zn 17 type structure. The film exhibited unusually strong textures with the crystallographic c axes of the crystallites aligned in the film plane. A large anisotropy was resulted with easy axis in the film plane. A well defined and large in-the-film-plane anisotropy of exceptionally high value of 3.3 x 10 6 erg/cm 3 has been obtained in the amorphous SmCo films by applying a magnetic field in the film plane during deposition. It was found that the in-the-film-plane anisotropy depended essentially on the applied field and Sm concentration. For films not synthesized through thermallized sputtering, the easy axis of the film could reoriented. A perpendicular anisotropy was also presented in the film synthesized through thermallized sputtering deposition. A large in-plane anisotropy was obtained in films deposited above ambient temperatures. It was concluded that the surface induced short range ordering was the origin of the in-the-film-phase anisotropy observed in amorphous film deposited in the presence of a magnetic field. The formation mechanism was different from that of the short range ordering induced by field annealing. The perpendicular anisotropy was shown to be growth induced. Large in-plane anisotropy in amorphous films was resulted form partial crystallization in the film. Both the formation of growth induced structure and partial crystallization in the film prevented the formation of the pair ordering and decreased in-the-film-plane anisotropy

Preferential removal of Sm by evaporation from Nd-Sm mixture and its application in direct burn-up determination of spent nuclear fuel

International Nuclear Information System (INIS)

Sajimol, R.; Bera, S.; Nalini, S.; Sivaraman, N.; Joseph, M.; Kumar, T.

2016-01-01

Rate of evaporation of Sm and Nd from their mixture was studied based on their ion intensities using thermal ionization mass spectrometry. Because of the comparatively larger evaporation rate of Sm, it was found possible to get the isotopic composition of Nd (fission product monitor) free from isobaric interference of Sm isotopes. The decrease in ion intensity of Sm was studied as a function of time and filament temperature. Based on this study, an easy and time effective method for the determination of burn-up of spent nuclear fuel was examined and the results are compared with that obtained by the conventional method. Typical burn-up value obtained for a pressurized heavy water reactor fuel dissolver solution using the direct method by preferential evaporation of Sm is: 0.84 at.%, whereas the one obtained by the use of conventional method is 0.82 at.%. In both the cases, Nd was employed as the fission product monitor. (author)

Production of medical radioisotope 153Sm in the Tehran Research Reactor (TRR) through theoretical calculations and practical tests

International Nuclear Information System (INIS)

Forughi, Sh.; Hamidi, S.; Khalafi, H.; Sheibani, Sh.; Shahidi, A.

2013-01-01

Highlights: ► Production of 153 Sm isotope by neutron activation in a nuclear reactor was studied. ► Optimal parameters for weight and irradiation time were found. ► This study led to an empirical correction factor (kf). ► Kf enhanced the production procedure of the 153 Sm radioisotope. ► The results led to nearly 60% decrease in the amount of material used in the production process. - Abstract: The feasibility of producing 2000–3000 mCi 153 Sm by irradiation of 152 Sm in 5 MW TRR was studied via TRR core simulation. In this study the cross-section of 152 Sm (n,γ) 153 Sm reaction from ENDF/B library was used. The effective activation cross section for production of 153 Sm is obtained using the neutron spectra in different irradiation channel of the core. The activity of the simulated samples is calculated using the obtained fluxes and cross sections. Then samples were prepared and irradiated under different conditions and fluxes. The final production’s specific activity was measured by the standard dose calibrator ISOMED 1010. By comparison of the theoretical calculations and actual measurements, an empirical correction factor (K f ) was obtained, which is helpful in production procedure of the 153 Sm radioisotope. The optimal weight of the samples and irradiation time was studied according to the flux calculations based on the location of the sample and saturated activity calculation. In order to test the proposed conditions, samples were prepared and were irradiated under the proposed conditions. According to the compared results with the initial irradiation condition, the new proposed sample which weighed 4 mg of Sm 2 O 3 is acceptable for the labeling, therefore this study led to nearly 60% decrease in the amount of material used in the production process

[Expression of plant antimicrobial peptide pro-SmAMP2 gene increases resistance of transgenic potato plants to Alternaria and Fusarium pathogens].

Science.gov (United States)

Vetchinkina, E M; Komakhina, V V; Vysotskii, D A; Zaitsev, D V; Smirnov, A N; Babakov, A V; Komakhin, R A

2016-09-01

The chickweed (Stellaria media L.) pro-SmAMP2 gene encodes the hevein-like peptides that have in vitro antimicrobial activity against certain harmful microorganisms. These peptides play an important role in protecting the chickweed plants from infection, and the pro-SmAMP2 gene was previously used to protect transgenic tobacco and Arabidopsis plants from phytopathogens. In this study, the pro-SmAMP2 gene under control of viral CaMV35S promoter or under control of its own pro-SmAMP2 promoter was transformed into cultivated potato plants of two cultivars, differing in the resistance to Alternaria: Yubiley Zhukova (resistant) and Skoroplodny (susceptible). With the help of quantitative real-time PCR, it was demonstrated that transgenic potato plants expressed the pro-SmAMP2 gene under control of both promoters at the level comparable to or exceeding the level of the potato actin gene. Assessment of the immune status of the transformants demonstrated that expression of antimicrobial peptide pro-SmAMP2 gene was able to increase the resistance to a complex of Alternaria sp. and Fusarium sp. phytopathogens only in potato plants of the Yubiley Zhukova cultivar. The possible role of the pro-SmAMP2 products in protecting potatoes from Alternaria sp. and Fusarium sp. is discussed.

Chemical methods for Sm-Nd separation and its application in isotopic geological dating

International Nuclear Information System (INIS)

Guo Qifeng.

1990-01-01

Three chemical methods for Sm-Nd separation are mainly desribed: low chromatography of butamone-ammonium thiocyanate for hight concentration Sm and Nd separation, P 240 column chromatography for medium concentration Sm-Nd separation, and pressure ion exchange for low concentration Sm-Nd. The first Sm-Nd synchrone obtained in China with Sm-Nd methods is introduced and Sm-Nd isotopic geological dating in Early Archaean rocks in eastern Hebei has been determined

An inelastic neutron scattering determination of the temperature dependence of the 3d-4f exchange interaction in Sm2Fe17

International Nuclear Information System (INIS)

Solodovnikov, Anton; Loewenhaupt, Michael; Moze, Oscar; Kuz'min, Michael D.; Bewley, Robert

2002-01-01

High energy transfer inelastic neutron scattering has been used to investigate the temperature dependence in the range from 20 to 450 K of the intermultiplet transition E inter in the intermetallic compound Sm 2 Fe 17 . The peak due to this transition, observed in the inelastic neutron spectrum, shifts to lower energies with increasing temperature. From the temperature dependence of E inter , the temperature dependence of the exchange field B ex acting on the Sm ion has been established experimentally, as the energy of the intermultiplet transition provides a direct value for the exchange field. At the highest measured temperature T=450 K, which is above the Curie point of 389 K for this compound, the transition energy is situated just above the bare spin-orbit splitting for Sm 3+ . The method utilized in the present investigation offers a rather easy and direct way to determine B ex in a large range of Sm intermetallics, which form an interesting class of hard magnetic materials

Smáčivost povrchových úprav DPS

OpenAIRE

Minář, Jan

2016-01-01

Tato bakalářská práce se zabývá měřením smáčecích charakteristik pomocí metody smáčecích vah u vzorků různých povrchových úprav od firmy Gatema. Věnuje se vlivu izotermálního stárnutí a přetavovacích procesů na smáčecí charakteristiky povrchových úprav ENIG, bezolovnatý HAL a imerzní cín. U povrchové úpravy imerzním cínem je sledován vliv intermetalické vrstvy na celkovou smáčivost. Dále se zabývá smáčivostí vrstvy niklu, po odstripování zlata, u povrchové úpravy ENIG. This bachelor’s thes...

VUV light induced valence degeneration in Sm over-layer on HOPG

International Nuclear Information System (INIS)

Kutluk, G; Nakatake, M; Arita, M; Namatame, H; Taniguchi, M; Ishitobi, Y; Sumida, H

2013-01-01

Systematic investigation of the influence of vacuum ultraviolet (VUV) irradiation on the valence degeneration in a Sm over-layer on a HOPG substrate was performed using in-situ photoemission spectroscopy (XPS, UPS, and ARPES) for the Sm coverage regime of 0.05-3.6 Å. This investigation confirmed that VUV irradiation-induced degeneration of divalent Sm exerts a more profound effect than Sm contamination during photoemission spectroscopy even under UHV. We found that the charge transfer occurs mainly from divalent Sm to the HOPG surface.

High pressure studies of configuration interaction and crystal field effects in Sm2+

International Nuclear Information System (INIS)

Shen, Y.; Bray, K.L.

1998-01-01

Full text: Divalent rare earth ions are interesting luminescence centres because of the low energy of the excited 4f n-1 5d 1 configuration relative to the 4f n ground configuration. The low energy difference between these two configurations leads to two principle effects which distinguish the luminescence properties of divalent rare earth ions from those of trivalent rare earth ions. First, a significant amount of 5d state mixing into the electronic states of the 4f n configuration occurs and second, the thermal activation barrier to 4f n → 4f n-1 5d 1 crossing is greatly reduced. The first effect introduces opposite parity character into the emitting levels of divalent rare earth ions and acts to shorten lifetimes and increase f-f luminescence intensity, while the second effect acts to enhance thermal quenching of 4f n excited electronic states closest in energy to the 4f n-1 5d 1 configuration. The interaction between the 4f n and 4f n-1 5d 1 configurations and crystal field properties are typically studied by considering the luminescence properties of divalent rare earth ions in a series of host crystals. We are currently developing a new approach, based on high pressure luminescence spectroscopy, for understanding con-figuration interaction and crystal field properties of divalent rare earth ions. The strategy of our approach is to use high pressure as a tool of structural perturbation. By applying hydrostatic pressure to solids, we have an opportunity to continuously vary the nearest neighbour coordination environment of divalent rare earth dopants. Our general goal is to correlate pressure-induced changes in local structure with pressure-induced changes in luminescence properties in an attempt to better understand structure-property-composition relations in solid state luminescent materials. In this paper we present recent results on Sm 2+ in a series of MFCl (M = Sr, Ba, Ca) host lattices. Luminescence spectra and decay properties as a function of

Solid-state amorphization of SmFe3 by hydrogenation

International Nuclear Information System (INIS)

Mueller, K.H.; Kubis, M.; Handstein, A.; Gutfleisch, O.

2000-01-01

Hydrogen-induced amorphization (HIA) has received much attention as a method for the preparation of amorphous compounds since its discovery by Yeh et al. Meanwhile it has been observed for a large number of intermetallic compounds with C15, C23, B8 2 , DO 19 and L1 2 structures. E.G. the C15 Laves-type compounds (MgCu 2 -type structure) of rare earth (R) - transition metal (T) compounds RT 2 show HIA for R = Y, Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho and Er. Aoki et al. postulated that new amorphizing compounds can be expected at high hydrogen pressures. In this work, the structural changes of SmFe 3 (PuNi 3 -type structure) during heating in high hydrogen pressures are reported

Magnetic properties of sintered high energy sm-co and nd-fe-b magnets

Directory of Open Access Journals (Sweden)

Talijan Nadežda M.

2006-01-01

Full Text Available Magnetic properties of permanent magnetic materials based on intermetallic compounds of Sm-Co and Nd-Fe-B are in direct dependence on the microstructure. In the first part of this paper, having in mind the importance of the regime of sintering and heat treatment to obtain the optimal magnetic structure, yet another approach in defining the most adequate technological parameters of the sintering process for applied heat treatment conditions was made. The goal of these investigations was to use the correlation that exists between sintering conditions (temperature and time and intensity of the diffraction peak of the (111 plane of the SmCo5 phase to optimize. In the second part a brief overview of high energy magnetic materials based on Nd-Fe-B is presented with special emphasis to the current research and development of high remanent nanocomposite magnetic materials based on Nd-Fe-B alloys with a reduced Nd content. Part of experimental results gained during research of the sintering process of SmCo5 magnetic materials were realized and published earlier. The scientific meeting devoted to the 60th anniversary of Frankel’s theory of sintering was an opportunity to show once more the importance and role of sintering in optimization of the magnetic microstructure of sintered Sm Co5 magnetic materials.

Fabrication of High-Quality SmBa2Cu3O7-δ Thin Films by a Modified TFA-MOD Process

International Nuclear Information System (INIS)

Kim, Duck Jin; Moon, Seung Hyun; Park, Chan; Yoo, Sang Im; Song, Kyu Jeong

2005-01-01

We report a successful fabrication of high-quality SmBa 2 Cu 3 O 7-δ (SmBCO) thin films on LaAlO 3 (LAO)(100) single crystalline substrates by a modified TFA-MOD method. After the pyrolysis heat treatment of spin-coated films up to 400 degree C, SmBCO films were fired at various temperatures ranging from 810 to 850 degree C in a reduced oxygen atmosphere (10 ppm O 2 in Ar). Optimally processed SmBCO films exhibited the zero-resistance temperature (T c ,zero) of 90.2 K and the critical current density (J c ) of 0.8 MA/cm 2 at 77K in self-field. Compared with the J c values (normally, > 2 MA/cm 2 at 77 K) of MOD-TFA processed YBCO films, rather depressed J c values in SmBCO films are most probably attributed to the existence of alpha-axis oriented grains.

X(5 Symmetry to 152Sm

Directory of Open Access Journals (Sweden)

Eid S. A.

2016-07-01

Full Text Available The excited positive and negative parity states, potential energy surfaces, V ( ; , electromagnetic transition probabilities, B ( E 1, B ( E 2, electric monopole strength X ( E 0 = E 2 and staggering e ect, I = 1, were calculated successfully using the inter- acting boson approximation model IBA -1. The calculated values are compared to the available experimental data and show reasonable agreement. The energy ratios and contour plot of the potential energy surfaces show that 152 Sm is an X (5 candidate.

Higher-order scalar interactions and SM vacuum stability

Energy Technology Data Exchange (ETDEWEB)

Lalak, Zygmunt; Lewicki, Marek; Olszewski, Paweł [Institute of Theoretical Physics, Faculty of Physics, University of Warsawul. Hoża 69, Warsaw (Poland)

2014-05-26

Investigation of the structure of the Standard Model effective potential at very large field strengths opens a window towards new phenomena and can reveal properties of the UV completion of the SM. The map of the lifetimes of the vacua of the SM enhanced by nonrenormalizable scalar couplings has been compiled to show how new interactions modify stability of the electroweak vacuum. Whereas it is possible to stabilize the SM by adding Planck scale suppressed interactions and taking into account running of the new couplings, the generic effect is shortening the lifetime and hence further destabilisation of the SM electroweak vacuum. These findings have been illustrated with phase diagrams of modified SM-like models. It has been demonstrated that stabilisation can be achieved by lowering the suppression scale of higher order operators while picking up such combinations of new couplings, which do not deepen the new minima of the potential. Our results show the dependence of the lifetime of the electroweak minimum on the magnitude of the new couplings, including cases with very small couplings (which means very large effective suppression scale) and couplings vastly different in magnitude (which corresponds to two different suppression scales)

Anomalous Z2 antiferromagnetic topological phase in pressurized SmB6

Science.gov (United States)

Chang, Kai-Wei; Chen, Peng-Jen

2018-05-01

Antiferromagnetic materials, whose time-reversal symmetry is broken, can be classified into the Z2 topology if they respect some specific symmetry. Since the theoretical proposal, however, no materials have been found to host such Z2 antiferromagnetic topological (Z2-AFT ) phase to date. Here we demonstrate that the topological Kondo insulator SmB6 can be a Z2-AFT system when pressurized to undergo an antiferromagnetic phase transition. In addition to proposing the possible candidate for a Z2-AFT material, in this work we also illustrate the anomalous topological surface states of the Z2-AFT phase which have not been discussed before. Originating from the interplay between the topological properties and the antiferromagnetic surface magnetization, the topological surface states of the Z2-AFT phase behave differently as compared with those of a topological insulator. Besides, the Z2-AFT insulators are also found promising in the generation of tunable spin currents, which is an important application in spintronics.

The ternary systems Sc-Sm(Dy)-Si at 870 K

International Nuclear Information System (INIS)

Kotur, B.Ya.; Mokra, I.Ya.; Toporinskij, A.Ya.

1991-01-01

Isothermal cross sections of the ternary systems Sc-Sm-Si and Sc-Dy-Si at 870 K have been plotted. Investigation of scandium and disprosium in ternary systems have been examined by X-ray diffraction and microstructure analysis. Besides literary data on binary systems Sc-Si, Sm-Si, Dy-Si have been used. Formation of limited (Sc-Sm-Si, Sc-Dy-Si) and continuous (Sc-Dy-Si) solid solutions based on bisilicides of Sc and Sm(Dy) is discovered. Two and five ternary compounds in Sc-Sm-Si and Sc-Dy-Si systems have been determined and their crystal structure has been established. When investigating of Sc-(rare earth element)-Si ternary systems and should take into account the specific interaction of scandium and samarium with REE

Cytogenetic effect of {sup 153} Sm-EDTMP in peripheral lymphocytes of patients with metastatic cancer; Efeito citogenetico do {sup 153} Sm-EDTMP em linfocitos perifericos de pacientes com cancer metastatico

Energy Technology Data Exchange (ETDEWEB)

Silva, Marcia Augusta da

2001-07-01

The {sup 153}Sm-EDTMP is a radiopharmaceutical used in nuclear medicine with promising results for the relief of metastatic pain. Therefore, there are few knowledge about the effects of {sup 153}Sm-EDTMP at cellular level. The present study was conduced with the aim of evaluating the cytogenetic effects of {sup 153}Sm-EDTMP in peripheral lymphocytes from patients with bone metastasis (with and without previous radio and/or chemotherapy) by the chromosome aberration technique, either in vivo or in vitro. For that, the blood samples were collected before and one hour after the endovenous administration of {sup 153}Sm-EDTMP (mean activity of 42.53+/-5.31 MBq/kg body weight), taking into account the rapid blood clearance. The principal types of structural chromosome aberrations found gaps and breaks, acentric fragments centric rings, double minutes and dicentrics. The statistical analysis showed that the group submitted to previous radio and chemotherapy before {sup 153}Sm-EDTMP administration showed significant difference in chromosome aberrations frequency one hour after the treatment. The analysis of the chromosome modal number and the kinetics of cellular cycle showed no statistical difference among the groups, suggesting that the treatment with {sup 153}Sm-EDTMP, did not influence these parameters. The carrier molecule, EDTMP, did not influence the induction of chromosome aberration. In relation to the in vitro assays, the obtained data of peripheral lymphocytes of healthy donors and patients with no previous treatment exposed to different radioactive concentration of {sup 153}Sm-EDTMP (0.046 - 1.110 MBq/mL) were better adjusted by linear regression model (Y=A+BX). The chromosome damage induced by {sup 153}Sm-EDTMP observed in vitro was about 2 fold higher than that found in vivo for the group of patients with no previous treatment. The obtained data showed that the therapy with {sup 153}Sm-EDTMP induced a few quantity of cytogenetic damages in peripheral

Luminescence enhancement in Eu3+, Sm3+ co-doped liy(MoO4)2 nano-phosphors by sol-gel process.

Science.gov (United States)

Zhou, Xianju; Wang, Guangchuan; Zhou, Tonghui; Zhou, Kaining; Li, Qingxu; Wang, Zhongqing

2014-05-01

A series of LiY(0.95-x)Eu(0.05)Sm(x)(MoO4)2 red light emitting phosphors were synthesized by sol-gel technique. The phase impurity and spectroscopic properties were characterized by X-ray Diffraction (XRD), Photo-Luminescence (PL) and Photo-Luminescence Excitation (PLE) spectra, respectively. It is found that the PLE spectra of the Eu3+, Sm3+ co-doped nanoparticles are enhanced and broadened as compared with the solely doped samples, which will make the co-doped phosphors match better with blue and/or UV GaN based LED chips. The red emission intensity of Eu3+ is largely enhanced by the energy transfer from Sm3+. The mechanism of the enhancement is clearly proven to be the increase in the quantum efficiency of 5D0 state of Eu3+ rather than the increase in the absorption of Eu3+. Meanwhile, the characteristic f-f transitions of Sm3+ are greatly reduced, resulting in little influence in the color purity of the co-doped phosphors. The present material is an amendatory promising red light emitting phosphor for white LEDs.

Evaluation of energy deposition by 153Sm in small samples

International Nuclear Information System (INIS)

Cury, M.I.C.; Siqueira, P.T.D.; Yoriyaz, H.; Coelho, P.R.P.; Da Silva, M.A.; Okazaki, K.

2002-01-01

Aim: This work presents evaluations of the absorbed dose by 'in vitro' blood cultures when mixed with 153 Sm solutions of different concentrations. Although 153 Sm is used as radiopharmaceutical mainly due to its beta emission, which is short-range radiation, it also emits gamma radiation which has a longer-range penetration. Therefore it turns to be a difficult task to determine the absorbed dose by small samples where the infinite approximation is no longer valid. Materials and Methods: MCNP-4C (Monte Carlo N - Particle transport code) has been used to perform the evaluations. It is not a deterministic code that calculates the value of a specific quantity solving the physical equations involved in the problem, but a virtual experiment where the events related to the problems are simulated and the concerned quantities are tallied. MCNP also stands out by its possibilities to specify geometrically any problem. However, these features, among others, turns MCNP in a time consuming code. The simulated problem consists of a cylindrical plastic tube with 1.5 cm internal diameter and 0.1cm thickness. It also has 2.0 cm height conic bottom end, so that the represented sample has 4.0 ml ( consisted by 1 ml of blood and 3 ml culture medium). To evaluate the energy deposition in the blood culture in each 153 Sm decay, the problem has been divided in 3 steps to account to the β- emissions (which has a continuum spectrum), gammas and conversion and Auger electrons emissions. Afterwards each emission contribution was weighted and summed to present the final value. Besides this radiation 'fragmentation', simulations were performed for many different amounts of 153 Sm solution added to the sample. These amounts cover a range from 1μl to 0.5 ml. Results: The average energy per disintegration of 153 Sm is 331 keV [1]. Gammas account for 63 keV and β-, conversion and Auger electrons account for 268 keV. The simulations performed showed an average energy deposition of 260 ke

Investigations on the determination of traces of some rare earths (Eu, Sm, Gd, Y) in oxides of rare earths (Y2O3, Sm2O3, Gd2O3) by emission spectrography in d.c. arc

International Nuclear Information System (INIS)

Dittrich, K.; Gajek, M.; Luan, P.

1978-01-01

The evaporation of traces and matrices of rare earth elements was investigated in different atmospheres. It was found, that low-boiling rare earths elements, because of their extended formation of carbides evaporate more slowly than high-boiling rare earths elements. The evaporation of the traces depends on the matrices. 3 cases for the determination of traces of rare earths elements in oxides of other rare earths elements are derived from the results of the evaporation: Low- to high-boiling traces of rare earths elements in low-boiling matrices of rare earths elements, low-boiling traces in medium- to high-boiling matrices, and medium- to high-boiling traces in medium- to high-boiling matrices. The results of the determination are: in Y 2 O 3 : 14 ppm Sm, 2 ppm Eu; in Gd 2 O 3 : 18 ppm Y, 3 ppm Sm, 2 ppm Eu; in Sm 2 O 3 : 70 ppm Y, 370 ppm Gd, 16 ppm Eu. (author)

Klimaforsøg med fravænnede smågrise

DEFF Research Database (Denmark)

Feenstra, A.

Publikationen belyser betydningen af luftfugtighed og ventilationsluftmængder for smågrise. Undersøgelsen var led i bestræbelserne på at nedbringe energiforbruget i smågrisestalde, og resultaterne viser at ventilationsmængden kan formindskes uden skadelige virkninger for dyrene.......Publikationen belyser betydningen af luftfugtighed og ventilationsluftmængder for smågrise. Undersøgelsen var led i bestræbelserne på at nedbringe energiforbruget i smågrisestalde, og resultaterne viser at ventilationsmængden kan formindskes uden skadelige virkninger for dyrene....

Crustal evolution of South American Platform based on Sm-Nd isotope geochemistry; Evolucao crustal da plataforma sul americana com base na geoquimica isotopica Sm-Nd

Energy Technology Data Exchange (ETDEWEB)

Sato, Kei

1998-07-01

Sm-Nd isotopic systematics is relevant to the topics of origin and evolution the of continental crust, where model ages refer to the time when crustal material was differentiated from the upper mantle. Alternative interpretations are due to a lack of adequate information on crustal processes and the variable composition of the mantle sources. The Sm-Nd methods are presented, and applied on rock materials from the South American Platform. The main conclusions indicate juvenile accretion with higher growth rates (peaks), around 3.7-3.5 Ga ({approx} 0.5% in volume), 3.1 - 2.9 Ga ({approx}16%), 2.7 - 2.6 ({approx} 9%), 2.2 - 1.9 (35%) and 1.3-1.0 (7%). The continental growth curve indicates that about 35 % of the crust was formed by 2.5 Ga, 88% by 1.8 Ga and 99% by 1.0 Ga, and the remaining {approx} 1 % was added in the Phanerozoic. Rapid crustal growth occurred between 2.2 and 1.9 Ga. The main period of continental crust formation occurred during the Paleoproterozoic, corresponding to 54 % in volume. Sm-Nd model ages, when compared with the crystallisation ages of granitoid rocks, furnish a rough estimate of juvenile vs. reworked material. Within the South American Platform about 45% of juvenile continental crust is still preserved within tectonic provinces of different ages. The remainder represents continental crust reworked in younger tectono-thermal events. In particular crustal reworking was predominating over juvenile accretion during Meso-Neoproterozoic. The Transbrasiliano Lineament is a megasuture, active in the Neoproterozoic, which separates a large northwestern mass, including the Amazonian and Sao Luis Cratons, from a southeastern mass, formed by a collage of cratonic fragments, of which the Sao Francisco and Rio de La Plata are the largest. The crustal evolutions of these two large continental masses are considered individually, and can be resumed following form: I - Old Archean rocks (>3.4 Ga) are found only within the south-eastern part (Gaviao Block

Real-time observation of growth and orientation of Sm-Ba-Cu-O phases on a Sm-211 whisker substrate by high-temperature optical microscopy

Czech Academy of Sciences Publication Activity Database

Sun, J.L.; Huang, Y.B.; Cheng, L.; Yao, X.; Lai, Y.J.; Jirsa, Miloš

2009-01-01

Roč. 9, č. 2 (2009), 898-902 ISSN 1528-7483 R&D Projects: GA ČR GA202/08/0722 Institutional research plan: CEZ:AV0Z10100520 Keywords : high-temperature optical microscopy * growth and orientation of Sm-Ba-Cu-O phases * Sm-211 whisker substrate Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 4.162, year: 2009

Influence of annealing and nitrogenation on structure and magnetic properties of mechanically alloyed Sm-Fe powders

International Nuclear Information System (INIS)

Teresiak, A.; Kubis, M.; Mattern, N.; Wolf, M.; Mueller, K.-H.

1998-01-01

Sm-Fe-N compounds were prepared by mechanical alloying, subsequent annealing and nitrogenation. For crystal structure investigations of the non-equilibrium phases Sm 2 Fe 17+x and Sm 2 Fe 17+x N y , respectively, formed at the various annealing temperatures T A , XRD with following Rietveld analysis was used. For T A between 600 C and 750 C a modified hexagonal TbCu 7 structure (space group P6/mmm) was found in which the Fe(2c) site is replaced by the partially (1/3) and randomly occupied Fe(61) site. The approximated composition is SmFe 8.8-9.0 . The nitrogenated alloys crystallize in the same structure for 600 C A A ≤ 900 C a disordered modified Th 2 Zn 17 structure (space group R anti 3m) was found that is formed by introducing additional Fe (6c) and Sm(3a) positions. The degree of order of the Sm- and Fe-atoms in c-direction increases with increasing annealing temperature. The completely ordered stoichiometric Sm 2 Fe 17 structure could not be reached by annealing the ball milled elemental powders. The nitrided alloys already form this intermediate structure at T A = 750 C. The interstitial nitrogen occupies the 9e site. The estimated nitrogen content is higher in the hexagonal phases than in the rhombohedral phase. Optimum magnetic properties, in particular a coercitivity μ 01 H C = 3.7 T and a good squareness of the demagnetization curve, were obtained for T A = 750 C. Here we found a nitrogen content of y = 3 for Sm 2 Fe 17+x N y . (orig.)

Immunostimulatory property of a synthetic peptide belonging to the soluble ATP diphosphohydro-lase isoform (SmATPDase 2 and immunolocalisation of this protein in the Schistosoma mansoni egg

Directory of Open Access Journals (Sweden)

Rita Gabriela Pedrosa Ribeiro Mendes

2011-11-01

Full Text Available A peptide (SmB2LJ; r175-194 that belongs to a conserved domain from Schistosoma mansoni SmATPDase 2 and is shared with potato apyrase, as predicted by in silico analysis as antigenic, was synthesised and its immunostimulatory property was analysed. When inoculated in BALB/c mice, this peptide induced high levels of SmB2LJ-specific IgG1 and IgG2a subtypes, as detected by enzyme linked immunosorbent assay. In addition, dot blots were found to be positive for immune sera against potato apyrase and SmB2LJ. These results suggest that the conserved domain r175-194 from the S. mansoni SmATPDase 2 is antigenic. Western blots were performed and the anti-SmB2LJ antibody recognised in adult worm (soluble worm antigen preparation or soluble egg antigen antigenic preparations two bands of approximately 63 and 55 kDa, molecular masses similar to those predicted for adult worm SmATPDase 2. This finding strongly suggests the expression of this same isoform in S. mansoni eggs. To assess localisation of SmATPDase 2, confocal fluorescence microscopy was performed using cryostat sections of infected mouse liver and polyclonal antiserum against SmB2LJ. Positive reactions were identified on the external surface from the miracidium in von Lichtenberg's envelope and, in the outer side of the egg-shell, showing that this soluble isoform is secreted from the S. mansoni eggs.

Investigation of the oxidative processes in intermetallic Sm Co5 powder during heat treatment

International Nuclear Information System (INIS)

Talijan, Nadezda M.; Milutinovic-Nikolic, Aleksandra; Stajic-Trosic, Jasna T.; Jovanovic, Zarko D.

1996-01-01

Understanding of the thermal stability of intermetallic Sm Co 5 powder is essential for designing the working atmosphere in all phases of the technological procedure in the production of sintered Sm Co 5 magnets to obtain maximal magnetic properties. The thermal stability of the Sm Co 5 powder with defined chemical composition and particle size was investigated in the interval from 20 to 900 deg C. Commercial Sm Co 5 powder was used in this experiment. The powder was milled in anhydrous toluene in an agate mortar to fine powder of quality used in the production of sintered magnets. All the experiments were carried out with powder of an average particle size of 7.23μm, established by SEM. THe thermal stability of the Sm Co 5 powder in static air atmosphere was investigated by thermogravimetric analysis (TGA) using a DuPont Thermal Analyzer. Investigation of the behaviour of Sm Co 5 powder during heating was carried out using new samples of Sm Co 5 powder for each of the investigated temperature cycles. It was found by TGA that up to 200 deg C, the oxidation of Sm Co 5 was negligible. X-ray diffraction of the thermogravimetric experimental residue of the Sm Co 5 powder, heated at 240 deg C, yielded only the presence of the Sm Co 5 phase. By X-ray diffraction different crystal forms were identified depending on the maximal heating temperature. The following phases were identified: Sm 2 O 3 , Co, Co O, Co 3 O 4 and Sm Co O 3 . According to TG and X-ray results, for each of the investigated temperatures, the corresponding chemical reactions were established. The experimental data from both the thermal and X-ray investigations confirm that the phases of pressing and aligning the Sm Co 5 powder, in the process of producing sintered Sm Co 5 magnets, may be performed without a protective atmosphere. (author)

Synthesis, crystal structure and thermal decomposition mechanism of the complex [Sm(p-BrBA)3bipy.H2O]2.H2O

International Nuclear Information System (INIS)

Zhang Haiyan; Zhang Jianjun; Ren Ning; Xu Suling; Tian Liang; Bai Jihai

2008-01-01

A new binuclear samarium (III) complex [Sm(p-BrBA) 3 bipy.H 2 O] 2 .H 2 O (p-BrBA = p-bromobenzoic acid; bipy = 2,2'-bipyridine) has been synthesized and characterized by elemental analysis, UV, IR, molar conductance and TG-DTG techniques. The structure of the complex was established by single crystal X-ray diffraction. It crystallizes in triclinic, space group P1-bar with a = 8.2476(7) A, b = 13.3483(10) A, c = 15.9035(13) A, α 73.9160(10) o , β = 78.9630(10) o , γ = 74.4770(10) o , Z = 1, D c 1.947 g cm -3 , F(000) = 910. The carboxylic groups are bonded to the samarium ion in two modes: bidentate bridging, monodentate. Each center Sm 3+ ion is eight-coordinated by one 2,2'-bipyridine molecular, four bidentate bridging and a monodentate carboxylic group, as well as one water molecular. The coordination polyhedron around each Sm 3+ ion can be described as bi-capped triangular prism geometry. The thermal decomposition behavior of the title complex in a static air atmosphere was investigated by TG-DTG and IR techniques

Magnetic anomalies in SmMn{sub 2}Ge{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Mallik, R; Sampathkumaran, E V; Paulose, P L [Tata Inst. of Fundamental Res., Mumbai (India). Solid State Phys. Group

1997-02-01

The results of electrical resistance ({rho}), magnetoresistance ({Delta}{rho}/{rho}) and magnetization (M) measurements are reported for polycrystalline SmMn{sub 2}Ge{sub 2}. Sharp variations in {rho} at 108 and 142 K attributable to well-known magnetic transitions from Mn sublattice are noted. Sign of the {rho} across these transitions exhibits anomalies. {Delta}{rho}/{rho} data indicate the existence of a hitherto unrecognized magnetic anomaly near 30 K, presumably of ferrimagnetic type as revealed by isothermal M data at low temperatures. (orig.). 5 refs.

Molecular electrophosphorescence in (Sm, Gd)-β-diketonate complex blend for OLED applications

International Nuclear Information System (INIS)

Reyes, R.; Cremona, M.; Teotonio, E.E.S.; Brito, H.F.; Malta, O.L.

2013-01-01

In this work the preparation and characterization of the triple-layer organic light-emitting diode (OLED) using a mixture of the samarium and gadolinium β-diketonate complexes [Sm 0.5 Gd 0.5 (TTA) 3 (TPPO) 2 ] as emitting layer is reported. The OLED's devices contain 1-(3-methylphenyl)-1,2,3,4-tetrahydroquinoline-6-carboxyaldehyde-1, 1'-diphenylhydrazone (MTCD) as hole-transporting layer and tris(8-hydroxyquinoline aluminum) (Alq 3 ) as electron transporting layer. The electroluminescence spectrum present emission narrow bands from the 4 G 5/2 → 6 H J transitions (where J=5/2, 7/2 and 9/2) characteristic of the Sm 3+ ion. These sharp lines are overlapped with a broad band attributed to the electrophosphorescence from the T 1 →S 0 transition in the ligand TTA. The intramolecular energy transfer is discussed and applied on the change of the emission color of the organic LEDs at different bias voltages. - Highlights: ► Samarium and gadolinium complexes. ► OLED with complex blend (Sm,Gd). ► Electrophosphorescence emission detection. ► Application in OLED changing the color emission.

Nonlinear acoustic properties of the ternary (La sub 2 O sub 3) sub x (Sm sub 2 O sub 3) sub y (P sub 2 O sub 5) sub (1-x-y) phosphate glasses

International Nuclear Information System (INIS)

Senin, H.B.; Sidek, H.A.A.; Saunders, G.A.

1994-01-01

From measurements of changes in transit time of 10 MHz of ultrasonic wave as a function of temperature and hydrostatic pressure, the linear and non-linear acoustic properties of the ternary (La sub 2 O sub 3) sub x (Sm sub 2 O sub 3) sub y (P sub 2 O sub 5) sub (1-x-y) glasses with compositions near to that corresponding to the metaphosphate have been determined. For each glass the second order elastic stiffness tensor components C sub ijs (SOEC) continue to increase down to 10K in a manner consistent with phonons interactions with two level systems. Measurements of the effects of hydrostatic pressure on the ultrasonic wave velocities have been used to determine the hydrostatic pressure derivatives (dC sub ij/dP) sub T,P=0 of the SOEC and (dB0 sup s)/dP) sub T,P=0 of the bulk modulus B0 sup s at room temperature (293K). For the ternary (La sub 2 O sub 3) sub x (Sm sub 2 O sub 3) sub y (P sub 2 O sub 5) sub (1-x-y) glasses, (dC sub 11/dP), (dC sub 44/dP), and (dBo/dP), are small but positives; these glasses stiffen under pressure. The elastic behaviour of these ternary glasses lies intermediate between those of (Sm sub 2 O sub 3)(P sub 2 O sub 5) sub (1-x) and (La sub 2 O sub 3) sub y (P sub 2 O sub 5) sub (1-x-y) glasses. Replacement of the Sm sup 3+ by La sup 3+ in the ternary phosphate glasses negates the acoustic mode softening. Possible sources of the different effects of La sub 3+ and Sm sub 3+ modifiers on the nonlinear acoustic properties of metaphosphate glasses are discussed

Synthesis and evaluation of 1,4-naphthoquinone ether derivatives as SmTGR inhibitors and new anti-schistosomal drugs.

Science.gov (United States)

Johann, Laure; Belorgey, Didier; Huang, Hsin-Hung; Day, Latasha; Chessé, Matthieu; Becker, Katja; Williams, David L; Davioud-Charvet, Elisabeth

2015-08-01

Investigations regarding the chemistry and mechanism of action of 2-methyl-1,4-naphthoquinone (or menadione) derivatives revealed 3-phenoxymethyl menadiones as a novel anti-schistosomal chemical series. These newly synthesized compounds (1-7) and their difluoromethylmenadione counterparts (8, 9) were found to be potent and specific inhibitors of Schistosoma mansoni thioredoxin-glutathione reductase (SmTGR), which has been identified as a potential target for anti-schistosomal drugs. The compounds were also tested in enzymic assays using both human flavoenzymes, i.e. glutathione reductase (hGR) and selenium-dependent human thioredoxin reductase (hTrxR), to evaluate the specificity of the inhibition. Structure-activity relationships as well as physico- and electro-chemical studies showed a high potential for the 3-phenoxymethyl menadiones to inhibit SmTGR selectively compared to hGR and hTrxR enzymes, in particular those bearing an α-fluorophenol methyl ether moiety, which improves anti-schistosomal action. Furthermore, the (substituted phenoxy)methyl menadione derivative (7) displayed time-dependent SmTGR inactivation, correlating with unproductive NADPH-dependent redox cycling of SmTGR, and potent anti-schistosomal action in worms cultured ex vivo. In contrast, the difluoromethylmenadione analog 9, which inactivates SmTGR through an irreversible non-consuming NADPH-dependent process, has little killing effect in worms cultured ex vivo. Despite ex vivo activity, none of the compounds tested was active in vivo, suggesting that the limited bioavailability may compromise compound activity. Therefore, future studies will be directed toward improving pharmacokinetic properties and bioavailability. © 2015 FEBS.

Raman spectrum, quantum mechanical calculations and vibrational assignments of (95% alpha-TeO2/5% Sm2O3) glass.

Science.gov (United States)

Shaltout, I; Mohamed, Tarek A

2007-06-01

Chozen system of tellurite glasses doped with rare earth oxides (95% alpha-TeO(2)+5% Sm2O3) was prepared by melt quenching. Consequently, the Raman spectrum (150-1250 cm(-1)) of the modified tellurite have been recorded. As a continuation to our normal coordinate analysis, force constants and quantum mechanical (QM) calculations for tbp TeO4(4-) (triagonal bipyramid, C(2v)) and TeO(3+1); Te2O7(6-) (bridged tetrahedral), we have carried out ab initio frequency calculations for tpy TeO3(2-) (triagonal pyramidal, C(3v) and C(s)) and tp TeO3(2-) (triagonal planar, D(3h)) ions. The quantum mechanical calculations at the levels of RHF, B3LYP and MP2 allow confident vibrational assignments and structural identification in the binary oxide glass (95% alpha-TeO2 +5% Sm2O3). The dominant three-dimensional network structures in the modified glass are triagonal pyramidal TeO3 with minor features of short range distorted tbp TeO4 and bridged tetrahedral unit of TeO(3+1), leading to a structure of infinite chain. Therefore, alpha-TeO2/Sm2O3 (95/5%) glass experience structural changes from TeO4 (tbp); Te2O7 (TeO(3+1))-->TeO3 (tpy).

Sm2Fe17Nx with discontinuous nitrogen profiles

International Nuclear Information System (INIS)

Skomski, R.; Kobayashi, K.; Brennan, S.; Coey, J.M.D.

1995-01-01

Microprobe analysis and theoretical calculations based on Hooke's law are used to investigate Sm 2 Fe 17 N x nitrides produced by N 2 and NH 3 interstitial modification. In the case of molecular nitrogen, stress and strain as well as Curie temperature, magnetization and anisotropy exhibit a smooth spatial variation, while nitrogen overloading due to the presence of ammonia leads to large excess strain and lattice incoherency. Discontinuous nitrogen profiles are associated with the occurrence of microcracks. ((orig.))

Novel SM-like Higgs decay into displaced heavy neutrino pairs in U(1){sup ′} models

Energy Technology Data Exchange (ETDEWEB)

Accomando, Elena [School of Physics and Astronomy, University of Southampton,Highfield, Southampton SO17 1BJ (United Kingdom); Rose, Luigi Delle; Moretti, Stefano [School of Physics and Astronomy, University of Southampton,Highfield, Southampton SO17 1BJ (United Kingdom); Particle Physics Department, Rutherford Appleton Laboratory,Chilton, Didcot, Oxon OX11 0QX (United Kingdom); Olaiya, Emmanuel; Shepherd-Themistocleous, Claire H. [Particle Physics Department, Rutherford Appleton Laboratory,Chilton, Didcot, Oxon OX11 0QX (United Kingdom)

2017-04-13

We examine the observability of heavy neutrino (ν{sub h}) signatures of a U(1){sup ′} enlarged Standard Model (SM) encompassing three heavy Majorana neutrinos alongside the known light neutrino states at the the Large Hadron Collider (LHC). We show that heavy neutrinos can be rather long-lived particles producing distinctive displaced vertices that can be accessed in the CERN LHC detectors. We concentrate here on the gluon fusion production mechanism gg→H{sub 1,2}→ν{sub h}ν{sub h}, where H{sub 1} is the discovered SM-like Higgs and H{sub 2} is a heavier state, yielding displaced leptons following ν{sub h} decays into weak gauge bosons. Using data collected by the end of the LHC Run 2, these signatures would prove to be accessible with negligibly small background.

Facile synthesis of Sm-doped BiFeO{sub 3} nanoparticles for enhanced visible light photocatalytic performance

Energy Technology Data Exchange (ETDEWEB)

Hu, Zijun; Chen, Da, E-mail: dchen_80@hotmail.com; Wang, Sen; Zhang, Ning; Qin, Laishun, E-mail: qinlaishun@cjlu.edu.cn; Huang, Yuexiang

2017-06-15

Highlights: • Effective Sm doping into BiFeO{sub 3} nanoparticles was obtained by a facile sol-gel route. • Band gap of Sm-doped BiFeO{sub 3} nanoparticles was regulated by the dopant concentration. • Sm-doped BiFeO{sub 3} nanoparticles exhibited superior photocatalytic activities. • The possible photocatalytic mechanism of Sm-doped BiFeO{sub 3} nanospheres was discussed. - Abstract: In this work, the effect of Sm doping on the structural and photocatalytic properties of BiFeO{sub 3} (BFO) was investigated. A series of Sm doped BFO nanoparticles containing different Sm dopant contents (Bi{sub (1−x)}Sm{sub x}FeO{sub 3}, x = 0.00, 0.01, 0.03, 0.05, 0.07, 0.10) were synthesized via a simple sol-gel route. It was revealed that Sm{sup 3+} ions were successfully doped into BFO nanoparticles, and the band gap value was gradually decreased when increasing Sm dopant concentration. The photocatalytic activity of Sm-doped BFO photocatalyst was significantly affected by the Sm doping content. Compared to pure BFO, the Sm-doped BFO samples exhibited much higher photocatalytic activity. The improved photocatalytic activity of Sm-doped BFO could be attributed to the enhanced visible light absorption and the efficient separation of photogenerated electrons and holes derived from Sm dopant trapping level in the Sm-doped BFO samples. In addition, the possible photocatalytic mechanism of Sm-doped BFO photocatalyst was also proposed.

Nuclear translocation of the cytoskeleton-associated protein, smALP, upon induction of skeletal muscle differentiation

International Nuclear Information System (INIS)

Cambier, Linda; Pomies, Pascal

2011-01-01

Highlights: → The cytoskeleton-associated protein, smALP, is expressed in differentiated skeletal muscle. → smALP is translocated from the cytoplasm to the nucleus of C2C12 myoblasts upon induction of myogenesis. → The differentiation-dependent nuclear translocation of smALP occurs in parallel with the nuclear accumulation of myogenin. → The LIM domain of smALP is essential for the nuclear accumulation of the protein. → smALP might act in the nucleus to control some critical aspect of the muscle differentiation process. -- Abstract: The skALP isoform has been shown to play a critical role in actin organization and anchorage within the Z-discs of skeletal muscles, but no data is available on the function of the smALP isoform in skeletal muscle cells. Here, we show that upon induction of differentiation a nuclear translocation of smALP from the cytoplasm to the nucleus of C2C12 myoblasts, concomitant to an up-regulation of the protein expression, occurs in parallel with the nuclear accumulation of myogenin. Moreover, we demonstrate that the LIM domain of smALP is essential for the nuclear translocation of the protein.

Subcoulomb fusion of 16O in odd Sm isotopes

International Nuclear Information System (INIS)

Pacheco, A.J.

1989-01-01

Cross sections for the formation of evaporation residues were measured for the reaction of 16 O with the odd 147 Sm and 149 Sm nuclei at near barrier energies. The results are well described by statistical model calculations. Fusion cross sections as a function of energy do not show any unusual behaviour that could be attributed to the presence of unpaired nucleons. An analysis based on a one-dimensional penetration model that includes the effect of permanent quadrupolar deformations shows that the extracted values of the parameter β 2 follow the systematics established by the rest of the even samarium isotopes. The dependence of β 2 on the mass of the target nucleus indicates that the influence exerted by collective aspects upon the subbarrier fusion process increases rapidly as a function of the number of neutrons added to the spherical semimagic 144 Sm nucleus. (Author) [es

Optical imaging of the transport properties of S-Sm-S junctions

International Nuclear Information System (INIS)

Tsumura, K; Nomura, S; Akazaki, T; Takayanagi, H

2009-01-01

We study the optical effects on superconductor-normal metal superconductor (S-Sm-S) junctions composed of two-dimensional electron gas (2DEG) in a GaAs/AlGaAs heterostructure and NbN superconducting electrodes. When the whole junction area was illuminated at λ = 800 nm, we observe a reduction in the normal resistance due to an increase in the sheet carrier density of the 2DEG, and the enhancement of the Andreev reflection probability. To reveal its origin, we performed scanning photo-voltage measurement by employing an optical microscope. The obtained image plots show maxima and minima of the photo-voltage change along the S-Sm interfaces. Those structures are considered to reflect the modulation of the barrier height at S-Sm interface and the increase in the scattering by photo-generated carriers. It is demonstrated that the scanning photo-voltage measurement is one of the most powerful tools as a local probe of the transport properties of S-Sm-S junctions.

Isotope shifts and hyperfine splittings in 144-154Sm I

International Nuclear Information System (INIS)

England, J.G.; Grant, I.S.; Newton, G.W.A.; Walker, P.M.

1990-01-01

The isotope shifts and hyperfine splittings have been measured in 144-154 Sm I using the crossed-beam laser fluorescence method. Transitions at 598.98 nm and 570.68 nm were investigated for all isotopes except 146 Sm and 153 Sm, in which measurements were only obtained at 570.68 nm. Laser-induced fluorescence has not previously been reported for 145 Sm. The magnetic dipole and electric quadrupole moments of the odd isotopes and the changes in mean square radii of the even ones are shown to be consistent with the information obtained from nuclear spectroscopy. (author)

Structural and photoluminescence investigations of Sm{sup 3+} doped BaY{sub 2}ZnO{sub 5} nanophosphors

Energy Technology Data Exchange (ETDEWEB)

Chahar, Sangeeta; Taxak, V.B.; Dalal, Mandeep; Singh, Sonika; Khatkar, S.P., E-mail: s_khatkar@rediffmail.com

2016-05-15

Highlights: • BaY{sub 2(1−x)}Sm{sub 2x}ZnO{sub 5} nanophosphors have been synthesized via solution combustion. • The nanophosphors have been characterized by XRD, TEM and PL spectroscopy. • The crystal structure reveals influence of doping on lattice parameters. • This nanophosphor executes orange–red emission under near UV excitation. - Abstract: BaY{sub 2}ZnO{sub 5}:Sm{sup 3+} nanophosphor was successfully synthesized using solution combustion process. XRD and photoluminescence (PL) techniques were used to analyze the structural and photoluminescence properties. Morphological study of the thermally stable powder was carried out using transmission electron microscope (TEM). Rietveld refinement technique has been used to analyze the samples qualitatively as well as quantitatively. X-Ray diffraction analysis confirms that the highly crystalline single phased Sm{sup 3+} doped BaY{sub 2}ZnO{sub 5} nanophosphor crystallizes in orthorhombic lattice with Pbnm space group. The average particle size lies in the range 80–90 nm with spherical morphology. The photoluminescence excitation at 411 nm yields an intense orange–red emission centered at 610 nm due to {sup 4}G{sub 5/2}–{sup 6}H{sub 7/2} transition. The concentration dependent luminescent behavior of BaY{sub 2(1−x)}Sm{sub 2x}ZnO{sub 5} nanophosphor shows that the optimum concentration for best luminescence is 3 mol%. These results indicate that these nanophosphors find potential applications in the field of phosphor-converted white LED systems.