Injectable calcium sulfate/mineralized collagen-based bone repair materials with regulable self-setting properties.

Science.gov (United States)

Chen, Zonggang; Liu, Huanye; Liu, Xi; Cui, Fu-Zhai

2011-12-15

An injectable and self-setting bone repair materials (nano-hydroxyapatite/collagen/calcium sulfate hemihydrate, nHAC/CSH) was developed in this study. The nano-hydroxyapatite/collagen (nHAC) composite, which is the mineralized fibril by self-assembly of nano-hydrocyapatite and collagen, has the same features as natural bone in both main hierarchical microstructure and composition. It is a bioactive osteoconductor due to its high level of biocompatibility and appropriate degradation rate. However, this material lacks handling characteristics because of its particle or solid-preformed block shape. Herein, calcium sulfate hemihydrate (CSH) was introduced into nHAC to prepare an injectable and self-setting in situ bone repair materials. The morphology of materials was observed using SEM. Most important and interesting of all, calcium sulfate dihydrate (CSD), which is not only the reactant of preparing CSH but also the final solidified product of CSH, was introduced into nHAC as setting accelerator to regulate self-setting properties of injectable nHAC/CSH composite, and thus the self-setting time of nHAC/CSH composite can be regulated from more than 100 min to about 30 min and even less than 20 min by adding various amount of setting accelerator. The compressive properties of bone graft substitute after final setting are similar to those of cancellous bone. CSD as an excellent setting accelerator has no significant effect on the mechanical property and degradability of bone repair materials. In vitro biocompatibility and in vivo histology studies demonstrated that the nHAC/CSH composite could provide more adequate stimulus for cell adhesion and proliferation, embodying favorable cell biocompatibility and a strong ability to accelerate bone formation. It can offer a satisfactory biological environment for growing new bone in the implants and for stimulating bone formation. Copyright © 2011 Wiley Periodicals, Inc.

Transport and diffusion of material quantities on propagating interfaces via level set methods

CERN Document Server

Adalsteinsson, D

2003-01-01

We develop theory and numerical algorithms to apply level set methods to problems involving the transport and diffusion of material quantities in a level set framework. Level set methods are computational techniques for tracking moving interfaces; they work by embedding the propagating interface as the zero level set of a higher dimensional function, and then approximate the solution of the resulting initial value partial differential equation using upwind finite difference schemes. The traditional level set method works in the trace space of the evolving interface, and hence disregards any parameterization in the interface description. Consequently, material quantities on the interface which themselves are transported under the interface motion are not easily handled in this framework. We develop model equations and algorithmic techniques to extend the level set method to include these problems. We demonstrate the accuracy of our approach through a series of test examples and convergence studies.

Transport and diffusion of material quantities on propagating interfaces via level set methods

International Nuclear Information System (INIS)

Adalsteinsson, David; Sethian, J.A.

2003-01-01

We develop theory and numerical algorithms to apply level set methods to problems involving the transport and diffusion of material quantities in a level set framework. Level set methods are computational techniques for tracking moving interfaces; they work by embedding the propagating interface as the zero level set of a higher dimensional function, and then approximate the solution of the resulting initial value partial differential equation using upwind finite difference schemes. The traditional level set method works in the trace space of the evolving interface, and hence disregards any parameterization in the interface description. Consequently, material quantities on the interface which themselves are transported under the interface motion are not easily handled in this framework. We develop model equations and algorithmic techniques to extend the level set method to include these problems. We demonstrate the accuracy of our approach through a series of test examples and convergence studies

Some aspects of the formulation of alginate dental impression materials--setting characteristics and mechanical properties.

Science.gov (United States)

Nallamuthu, Navina A; Braden, Michael; Patel, Mangala P

2012-07-01

To study the role of the various components of alginate dental impression materials. Experimental materials were formulated and their physical properties characterized and compared to commercially available counterparts (Neocolloid, Palgat Plus and Blueprint Cremix). Properties examined were: dimensional stability and weight change in water and artificial saliva; setting behavior; Shore A hardness and tear energy. The role of magnesium oxide was also investigated. Weight changes in water and artificial saliva can be attributed to an initial thermodynamic potential owing to the ionic content of the alginate, causing water to diffuse into the material. Water is then driven back out following a reversal of this potential. Hardness results for experimental materials were within the range obtained from the commercial materials. The hardness value for an experimental formulation that did not contain magnesium oxide was lower than values from the other experimental materials that did. Tear energies for all three experimental materials were greater than those of the commercial products. There were statistically significant differences between the two experimental materials that contained magnesium oxide and one that did not. With regard to setting time, statistically significant differences were seen between commercial materials and two of the experimental materials. The experimental material that did not contain magnesium oxide had a considerably longer setting time than all of the other materials tested. The key role of magnesium oxide in the setting reaction and the effect on hardness have been demonstrated and discussed. Copyright © 2012 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Material science experiments at the ATLAS facility

CERN Document Server

Keinigs, R K; Atchison, W L; Bartsch, R R; Faehl, R J; Flower-Maudlin, E C; Hammerberg, J E; Holtkamp, D B; Kyrala, G A; Oro, D M; Parker, J V; Preston, D L; Removsky, R E; Scudder, D W; Sheehey, P T; Shlachter, J S; Taylor, A J; Tonks, D L; Turchi, P J; Chandler, E A

2001-01-01

Summary form only given, as follows. Three experimental campaigns designed for fielding on the Atlas Pulsed Power Facility are discussed. The foci of these experiments are directed toward a better understanding of three material science issues; (1) strength at high strain and high strain rate, (2) friction at material interfaces moving at high relative velocities, and (3) material failure in convergent geometry. Atlas provides an environment for investigating these problems in parameter regimes and geometries that are inaccessible with standard techniques. For example, flow stress measurements of material strength using conventional Hopkinson bar experiments are limited to strain rates ~10/sup 4/ sec/sup -1/. Atlas will be capable of imploding metal shells to combined strains of 200% and strain rates >10/sup 6/ sec/sup -1/. Data obtained regimes is used to test different constitutive strength models used in several Los Alamos hydrocodes. Dynamic friction has been investigated for nearly 300 years, but a first...

Functional relationship of room temperature and setting time of alginate impression material

Directory of Open Access Journals (Sweden)

Dyah Irnawati

2009-09-01

Full Text Available Background: Indonesia is a tropical country with temperature variation. A lot of dental clinics do not use air conditioner. The room temperature influences water temperature for mixing alginate impression materials. Purpose: The aim of this study was to investigate the functional relationship of room temperature and initial setting time of alginate impression materials. Methods: The New Kromopan® alginate (normal and fast sets were used. The initial setting time were tested at 23 (control, 24, 25, 26, 27, 28, 29, 30 and 31 degrees Celcius room temperatures (n = 5. The initial setting time was tested based on ANSI/ADA Specification no. 18 (ISO 1563. The alginate powder was mixed with distilled water (23/50 ratio, put in the metal ring mould, and the initial setting time was measured by test rod. Data were statistically analyzed by linear regression (α = 0.05. result: The initial setting times were 149.60 ± 0.55 (control and 96.40 ± 0.89 (31° C seconds for normal set, and 122.00 ± 1.00 (control and 69.60 ± 0.55 (31° C seconds for fast set. The coefficient of determination of room temperature to initial setting time of alginate were R2 = 0.74 (normal set and R2 = 0.88 (fast set. The regression equation for normal set was Y = 257.6 – 5.5 X (p < 0.01 and fast set was Y = 237.7 – 5.6 X (p < 0.01. Conclusions: The room temperature gave high contribution and became a strength predictor for initial setting time of alginates. The share contribution to the setting time was 0.74% for normal set and 0.88% for fast set alginates.

EXTENSIVE LISTENING: LET STUDENTS EXPERIENCE LEARNING BY OPTIMIZING THE USE OF AUTHENTIC MATERIALS

Directory of Open Access Journals (Sweden)

Yulia Hapsari

2014-10-01

Full Text Available In a country like Indonesia, one of challenges in learning English as a foreign language is a lack of exposure of English in its authentic sense. The use of authentic materials seems to be an option to cope with this situation. One of the ways to optimize the use of the authentic materials to trigger students to experience learning and to enhance their active involvement in the learning process is by using it in extensive listening activities. Through extensive listening by using authentic materials, students are exposed to real native speech in meaningful language use. As the result, difficulties in listening gradually disappear.  In order to put the idea into practice, the first thing to do is to set objectives of each meeting based on core vocabulary and grammar that are suitable for the learners using comprehensible input principle as the basic consideration. Second, selecting authentic materials that suit the objectives and that give exposure to formulaic language and meaningful language use. Then, preparing activities in which the instruction is reasonable and lead to sufficient practice to develop fluency. Finally, synchronize teaching activities to increase students’ motivation to learn. As a follow up activities, students are informed and eventually involved in the whole process. Thus, students experience learning and actively involved in their learning process.

Transnational television audiences and modes of engagement: studying audience engagement as a set of experiences

DEFF Research Database (Denmark)

Keinonen, Heidi; Jensen, Pia Majbritt; Esser, Andrea

2018-01-01

Audience engagement is attracting increasing attention in various academic disciplines. Recently, the industry- and technology-oriented conceptualizations of engagement have been challenged by a more audience-oriented understanding. This article aims at contributing to the development of a more...... nuanced audience-oriented approach. First, we make a theoretical argument by bringing various key theories together and, second, we present an empirical contribution by analysing audience engagement as a set of experiences. Our analysis builds on the empirical material produced by conducting two rounds...... and ritualistic engagement, ludic engagement. We also discovered that audiences at times get disengaged or opt to actively resist engagement....

Material Science Experiments on Mir

Science.gov (United States)

Kroes, Roger L.

1999-01-01

This paper describes the microgravity materials experiments carried out on the Shuttle/Mir program. There were six experiments, all of which investigated some aspect of diffusivity in liquid melts. The Liquid Metal Diffusion (LMD) experiment investigated the diffusivity of molten Indium samples at 185 C using a radioactive tracer, In-114m. By monitoring two different gamma ray energies (190 keV and 24 keV) emitted by the samples it was possible to measure independently the diffusion rates in the bulk and at the surface of the samples. The Queens University Experiment in Liquid Diffusion (QUELD) was the furnace facility used to process 213 samples for the five other experiments. These experiments investigated the diffusion, ripening, crystal growth, and glass formation in metal, semiconductor, and glass samples. This facility had the capability to process samples in an isothermal or gradient configuration for varying periods of time at temperatures up to 900 C. Both the LMD and the QUELD furnaces were mounted on the Microgravity Isolation Mount (MIM) which provided isolation from g-jitter. All the microgravity experiments were supported by the Space Acceleration Measurement System (SAMS); a three head three axes acceleration monitoring system which measured and recorded the acceleration environment.

Characterization of full set material constants of piezoelectric materials based on ultrasonic method and inverse impedance spectroscopy using only one sample.

Science.gov (United States)

Li, Shiyang; Zheng, Limei; Jiang, Wenhua; Sahul, Raffi; Gopalan, Venkatraman; Cao, Wenwu

2013-09-14

The most difficult task in the characterization of complete set material properties for piezoelectric materials is self-consistency. Because there are many independent elastic, dielectric, and piezoelectric constants, several samples are needed to obtain the full set constants. Property variation from sample to sample often makes the obtained data set lack of self-consistency. Here, we present a method, based on pulse-echo ultrasound and inverse impedance spectroscopy, to precisely determine the full set physical properties of piezoelectric materials using only one small sample, which eliminated the sample to sample variation problem to guarantee self-consistency. The method has been applied to characterize the [001] C poled Mn modified 0.27Pb(In 1/2 Nb 1/2 )O 3 -0.46Pb(Mg 1/3 Nb 2/3 )O 3 -0.27PbTiO 3 single crystal and the validity of the measured data is confirmed by a previously established method. For the inverse calculations using impedance spectrum, the stability of reconstructed results is analyzed by fluctuation analysis of input data. In contrast to conventional regression methods, our method here takes the full advantage of both ultrasonic and inverse impedance spectroscopy methods to extract all constants from only one small sample. The method provides a powerful tool for assisting novel piezoelectric materials of small size and for generating needed input data sets for device designs using finite element simulations.

Interprofessional education through shadowing experiences in multi-disciplinary clinical settings

Directory of Open Access Journals (Sweden)

Moore Ainsley E

2010-12-01

Full Text Available Abstract The World Health Organization has recently added Interprofessional Education (IPE to its global health agenda recognizing it as a necessary component of all health professionals' education. We suggest mandatory interprofessional shadowing experiences as a mechanism to be used by chiropractic institutions to address this agenda. IPE initiatives of other professions (pharmacy and medicine are described along with chiropractic. This relative comparison of professions local to our jurisdiction in Ontario, Canada is made so that the chiropractic profession may take note that they are behind other health care providers in implementing IPE. Interprofessional shadowing experiences would likely take place in a multi-disciplinary clinical setting. We offer an example of how two separate professions within a Family Health Team (FHT can work together in such a setting to enhance both student learning and patient care. For adult learners, using interprofessional shadowing experiences with learner-derived and active objectives across diverse health professional groups may help to improve the educational experience. Mandatory interprofessional shadowing experiences for chiropractors during their training can enhance future collaborative practice and provide success in reaching a goal common to each profession - improved patient care.

Participatory health system priority setting: Evidence from a budget experiment.

Science.gov (United States)

Costa-Font, Joan; Forns, Joan Rovira; Sato, Azusa

2015-12-01

Budget experiments can provide additional guidance to health system reform requiring the identification of a subset of programs and services that accrue the highest social value to 'communities'. Such experiments simulate a realistic budget resource allocation assessment among competitive programs, and position citizens as decision makers responsible for making 'collective sacrifices'. This paper explores the use of a participatory budget experiment (with 88 participants clustered in social groups) to model public health care reform, drawing from a set of realistic scenarios for potential health care users. We measure preferences by employing a contingent ranking alongside a budget allocation exercise (termed 'willingness to assign') before and after program cost information is revealed. Evidence suggests that the budget experiment method tested is cognitively feasible and incentive compatible. The main downside is the existence of ex-ante "cost estimation" bias. Additionally, we find that participants appeared to underestimate the net social gain of redistributive programs. Relative social value estimates can serve as a guide to aid priority setting at a health system level. Copyright © 2015 Elsevier Ltd. All rights reserved.

SeriousGeoGames - Geoscience Virtual Reality Experiences for Festival Settings

Science.gov (United States)

Skinner, Christopher

2017-04-01

Festivals, fairs and showcases provide scientists an opportunity to engage with potentially thousands of members of the public in a short space of time. However, the festival setting provides the same members of the public many exhibits competing for their attention - for family groups, this means a successful exhibit must both attract the attention of the group, and also entertain them long enough for the scientist to communicate their message. Here, we will discuss the use of short Virtual Reality (VR) experiences by the SeriousGeoGames project in engaging the public with research in a festival-like setting. SeriousGeoGames uses bespoke, immersive VR experiences to both attract and engage the user. They merge scientific models and/or research field data with popular gaming engines, and present them in VR using the Oculus Rift headset. The experiences are designed to last around four minutes and follow a basic script, although a conversational tone is encouraged. SeriousGeoGames applications have been successfully exhibited at several festivals of different sizes and intended audiences, such as the national-level week-long Cheltenham Science Festival, and the local arts and cultural festival, Hull Freedom Festival. The Flash Flood! application was developed for the Natural Environment Research Council UK (NERC) Flooding from Intense Rainfall (FFIR) programme as a Knowledge Transfer (KT) tool. It was demonstrated at the 5-day NERC Into the blue Science Showcase as one of 38 stands highlighting the UK's cutting edge environmental science research. Over 5000 members of the public attended, and more than 1000 demonstrations of Flash Flood! were made, with 400 booklets handed out. The exhibit received positive feedback from users, and won third prize in a public vote for favourite stand - but this had little visible impact on online metrics of the SeriousGeoGames web presence. In terms of providing a 'positive experience' with science the application was successfully

R20 Programme: Grout setting and strength development in ONKALO. Literature review, observations and experiments

International Nuclear Information System (INIS)

Karttunen, P.; Raivio, P.

2008-12-01

ONKALO is an underground rock characterisation facility planned to be a part of nuclear waste repository in future. ONKALO is located in Olkiluoto Finland. Posiva Oy owned by Teollisuuden Voima Oy and Fortum Power and Heat Oy is responsible for the repository, research, construction and use of the ONKALO and closing of the underground facility after use. During construction of ONKALO it has been observed that the setting and strength of grouting materials have not sporadically developed as expected (in ONKALO). The phenomenon has been observed for the first time in the year 2005. The observations examined in this report are made in the grouting field tests and in ordinary grouting during the year 2007. The phenomenon has been observed with low pH and standard grouts and bolt grouting mortars. The reasons for this phenomenon are studied based on literature review, observations and tests in the field and laboratory. The effect of reactions between groundwater and grout, the effect of the raw materials as well as curing conditions, temperature and pressure are studied. There are several potential factors that can cause observed phenomenon. Some factors are more probable than others. Laboratory experiments for the samples of poor strength development were done. These samples were taken from the grouting holes or packers in which the strength of the grout was not developed as expected. The results of these experiments were compared to the results gained from the samples cast from the same grout batches and cured in the tunnel conditions. The purpose was to find out the factor causing slow strength development of the grouted mixes. One single reason, which can slow the setting of the grouts in ONKALO is the low temperature in the rock, but the temperature cannot cause the phenomenon alone. Locally groundwater contains compounds that can create chemically aggressive environment for (the Portland) cement based grouts. The groundwater chemistry in ONKALO has not been proved

Priority setting for risk assessment-The benefit of human experience

International Nuclear Information System (INIS)

Alonzo, Cristina; Laborde, Amalia

2005-01-01

The chemical risk assessment process plays an essential role in the potential human health risk evaluation. Setting priorities for this purpose is critical for better use of the available human and material resources. It has been generally accepted that all new chemicals require safety evaluation before manufacture and sale. This is a difficult task due to the large number of chemicals directly consumed by man, as well as those that are widely used. At present, more than 50% of chemicals do not have the minimum data requirements for risk assessment. Production and release volumes are well-established prioritization criteria, although volume itself does not directly reflect the likelihood of human exposure. This quantitative approach applied in setting priorities may be influenced by human experience. Human data provided by epidemiological investigations have been accepted as the most credible evidence for human toxicity although analytical studies are expensive and require long-term follow up. Unfortunately, some epidemiological studies continue to have difficulties with exposure documentation, controlling bias and confounding, and are not able to provide predictions of risk until humans are exposed. Clinical toxicology services and Poison Centres around the world accumulate a great amount of toxicological-related information that may contribute to the evidence-based medicine and research and so collaborate with all the risk assessment disciplines. The information obtained from these services and centers has the potential to prioritize existing chemical assessment processes or to influence scheduling of classes of chemicals. Prioritization process may be improved by evaluating Poisons Centres statistics about frequency of cases, severity of effects, detection of unusual circumstances of exposure, as well as vulnerable sub-populations. International efforts for the harmonization of these data offer a useful tool to take advantage of this global information. Case

Ultrasound-guided Breast Biopsy in the Resource-limited Setting: An Initial Experience in Rural Uganda

Directory of Open Access Journals (Sweden)

Christopher R. Stark

2017-06-01

Full Text Available Purpose: To describe the methodology and initial experience behind creation of an ultrasoundguided percutaneous breast core biopsy program in rural Uganda. Methods and Materials: Imaging the World Africa (ITWA is the registered non-governmental organization division of Imaging the World (ITW, a not-for-profit organization whose primary aim is the integration of affordable high-quality ultrasound into rural health centers. In 2013, ITWA began the pilot phase of an IRB-approved breast care protocol at a rural health center in Uganda. As part of the protocol’s diagnostic arm, an ultrasound-guided percutaneous breast core biopsy training curriculum was implemented in tandem with creation of regionally supplied biopsy kits. Results: A surgeon at a rural regional referral hospital was successfully trained and certified to perform ultrasound-guided percutaneous breast core biopsies. Affordable and safe biopsy kits were created using locally available medical supplies with the cost of each kit totaling $10.62 USD. Conclusion: Successful implementation of an ultrasound-guided percutaneous breast core biopsy program in the resource-limited setting is possible and can be made sustainable through incorporation of local health care personnel and regionally supplied biopsy materials. Our hope is that ITWA’s initial experience in rural Uganda can serve as a model for similar programs in the future.

Neutron irradiation experiments for fusion reactor materials through JUPITER program

International Nuclear Information System (INIS)

Abe, K.; Namba, C.; Wiffen, F.W.; Jones, R.H.

1998-01-01

A Japan-USA program of irradiation experiments for fusion research, ''JUPITER'', has been established as a 6 year program from 1995 to 2000. The goal is to study ''the dynamic behavior of fusion reactor materials and their response to variable and complex irradiation environment''. This is phase-three of the collaborative program, which follows RTNS-II program (phase-1: 1982-1986) and FFTF/MOTA program (phase-2: 1987-1994). This program is to provide a scientific basis for application of materials performance data, generated by fission reactor experiments, to anticipated fusion environments. Following the systematic study on cumulative irradiation effects, done through FFTF/MOTA program. JUPITER is emphasizing the importance of dynamic irradiation effects on materials performance in fusion systems. The irradiation experiments in this program include low activation structural materials, functional ceramics and other innovative materials. The experimental data are analyzed by theoretical modeling and computer simulation to integrate the above effects. (orig.)

Recreation settings, scenery, and visitor experiences: a research assessment.

Science.gov (United States)

Daniel R. Williams

2007-01-01

A core task of recreation research is to understand the relation between settings, scenery, and visitor experiences. This paper uses environmental psychology to describe four conceptual models underlying these relations: inherent/aesthetic, opportunity/goal-directed, symbolic, and expressive. The paper then describes some challenges to applying results to recreation...

Moldable setting time evaluation between sodium alginate and bovine gelatine of glutinous rice mixture as dental putty materials

Science.gov (United States)

Takarini, V.; Hasratiningsih, Z.; Karlina, E.; Febrida, R.; Asri, L. A. T. W.; Purwasasmita, BS

2017-02-01

Putty elastomeric material is a viscous, moldable material that can be used as a dental impression to record and duplicate the tooth structure. Commercially available putty materials are hardly found in the Indonesian market. The aim of this work is to develop an alternative putty dental material from glutinous rice with two different gelling agents; sodium alginate and bovine gelatine. A commercially putty material was used as a control. The length of time required for the putty materials to set (setting time) was evaluated with compression set test. The result showed that sodium alginate and bovine gelatine gelling agents resulted in moldable putty materials that comparable to the commercial product. Glutinous rice mixed with sodium alginate gelling agent demonstrated longer setting time (more than 1 hours) compared to bovine gelatine (6 minutes). These may occur due to heat treatment applied to the bovine gelatine, while sodium alginate mixture has a chemical reaction since CaCl2 crosslink agent had been added to the mixture. Glutinous rice with bovine gelatine mixture is a promising candidate to be used as a dental putty material.

Ceramic bar impact experiments for improved material model

International Nuclear Information System (INIS)

Brar, N.S.; Proud, W.G.; Rajendran, A.M.

2004-01-01

Ceramic bar-on-bar (uniaxial stress) experiments are performed to extend uniaxial strain deformation states imposed in flyer plate impact experiments. A number of investigators engaged in modeling the bar-on-bar experiments have varying degrees of success in capturing the observed fracture modes in bars and correctly simulating the measured in-situ axial stress or free surface velocity histories. The difficulties encountered are related to uncertainties in understanding the dominant failure mechanisms as a function of different stress states imposed in bar impacts. Free surface velocity of the far end of the target AD998 bar were measured using a VISAR in a series of bar-on-bar impact experiments at nominal impact speeds of 100 m/s, 220 m/s, and 300 m/s. Velocity history data at an impact of 100 m/s show the material response as elastic. At higher impact velocities of 200 m/s and 300 m/s the velocity history data suggest an inelastic material response. A high-speed (Imacon) camera was employed to examine the fracture and failure of impactor and target bars. High speed photographs provide comprehensive data on geometry of damage and failure patterns as a function of time to check the validity of a particular constitutive material model for AD998 alumina used in numerical simulations of fracture and failure of the bars on impact

Experience-based design for integrating the patient care experience into healthcare improvement: Identifying a set of reliable emotion words.

Science.gov (United States)

Russ, Lauren R; Phillips, Jennifer; Brzozowicz, Keely; Chafetz, Lynne A; Plsek, Paul E; Blackmore, C Craig; Kaplan, Gary S

2013-12-01

Experience-based design is an emerging method used to capture the emotional content of patient and family member healthcare experiences, and can serve as the foundation for patient-centered healthcare improvement. However, a core tool-the experience-based design questionnaire-requires words with consistent emotional meaning. Our objective was to identify and evaluate an emotion word set reliably categorized across the demographic spectrum as expressing positive, negative, or neutral emotions for experience-based design improvement work. We surveyed 407 patients, family members, and healthcare workers in 2011. Participants designated each of 67 potential emotion words as positive, neutral, or negative based on their emotional perception of the word. Overall agreement was assessed using the kappa statistic. Words were selected for retention in the final emotion word set based on 80% simple agreement on classification of meaning across subgroups. The participants were 47.9% (195/407) patients, 19.4% (33/407) family members and 32.7% (133/407) healthcare staff. Overall agreement adjusted for chance was moderate (k=0.55). However, agreement for positive (k=0.69) and negative emotions (k=0.68) was substantially higher, while agreement in the neutral category was low (k=0.11). There were 20 positive, 1 neutral, and 14 negative words retained for the final experience-based design emotion word set. We identified a reliable set of emotion words for experience questionnaires to serve as the foundation for patient-centered, experience-based redesign of healthcare. Incorporation of patient and family member perspectives in healthcare requires reliable tools to capture the emotional content of care touch points. Copyright © 2013 Elsevier Inc. All rights reserved.

New nuclear data set ABBN-90 and its testing on macroscopic experiments

International Nuclear Information System (INIS)

Kosh'cheev, V.N.; Manturov, G.N.; Nikolaev, M.N.; Rineyskiy, A.A.; Sinitsa, V.V.; Tsyboolya, A.M.; Zabrodskaya, S.V.

1993-01-01

The new group constant set ABBN-90 is developed now. It based on the FOND-2 evaluated neutron data library processed with the code GRUCON. Some results of the testing ABBN-90 set in different macroscopic experiments are presented. (author)

Development of Data Acquisition Set-up for Steady-state Experiments

Science.gov (United States)

Srivastava, Amit K.; Gupta, Arnab D.; Sunil, S.; Khan, Ziauddin

2017-04-01

For short duration experiments, generally digitized data is transferred for processing and storage after the experiment whereas in case of steady-state experiment the data is acquired, processed, displayed and stored continuously in pipelined manner. This requires acquiring data through special techniques for storage and on-the-go viewing data to display the current data trends for various physical parameters. A small data acquisition set-up is developed for continuously acquiring signals from various physical parameters at different sampling rate for long duration experiment. This includes the hardware set-up for signal digitization, Field Programmable Gate Arrays (FPGA) based timing system for clock synchronization and event/trigger distribution, time slicing of data streams for storage of data chunks to enable viewing of data during acquisition and channel profile display through down sampling etc. In order to store a long data stream of indefinite/long time duration, the data stream is divided into data slices/chunks of user defined time duration. Data chunks avoid the problem of non-access of server data until the channel data file is closed at the end of the long duration experiment. A graphical user interface has been developed in Lab VIEW application development environment for configuring the data acquisition hardware and storing data chunks on local machine as well as at remote data server through Python for further data access. The data plotting and analysis utilities have been developed with Python software, which provides tools for further data processing. This paper describes the development and implementation of data acquisition for steady-state experiment.

Machinability Study on Milling Kenaf Fiber Reinforced Plastic Composite Materials using Design of Experiments

Science.gov (United States)

Azmi, H.; Haron, C. H. C.; Ghani, J. A.; Suhaily, M.; Yuzairi, A. R.

2018-04-01

The surface roughness (Ra) and delamination factor (Fd) of a milled kenaf reinforced plastic composite materials are depending on the milling parameters (spindle speed, feed rate and depth of cut). Therefore, a study was carried out to investigate the relationship between the milling parameters and their effects on a kenaf reinforced plastic composite materials. The composite panels were fabricated using vacuum assisted resin transfer moulding (VARTM) method. A full factorial design of experiments was use as an initial step to screen the significance of the parameters on the defects using Analysis of Variance (ANOVA). If the curvature of the collected data shows significant, Response Surface Methodology (RSM) is then applied for obtaining a quadratic modelling equation that has more reliable in expressing the optimization. Thus, the objective of this research is obtaining an optimum setting of milling parameters and modelling equations to minimize the surface roughness (Ra) and delamination factor (Fd) of milled kenaf reinforced plastic composite materials. The spindle speed and feed rate contributed the most in affecting the surface roughness and the delamination factor of the kenaf composite materials.

Experiment study on sediment erosion of Pelton turbine flow passage component material

Science.gov (United States)

Liu, J.; Lu, L.; Zhu, L.

2012-11-01

A rotating and jet experiment system with high flow velocity is designed to study the anti-erosion performance of materials. The resultant velocity of the experiment system is high to 120 m/s. The anti-erosion performance of materials used in needle and nozzle and bucket of Pelton turbine, which is widely used in power station with high head and little discharge, was studied in detail by this experiment system. The experimental studies were carried with different resultant velocities and sediment concentrations. Multiple linear regression analysis method was applied to get the exponents of velocity and sediment concentration. The exponents for different materials are different. The exponents of velocity ranged from 3 to 3.5 for three kinds of material. And the exponents of sediment concentration ranged from 0.97 to 1.03 in this experiment. The SEM analysis on the erosion surface of different materials was also carried. On the erosion condition with high resultant impact velocity, the selective cutting loss of material is the mainly erosion mechanism for metal material.

Experiment study on sediment erosion of Pelton turbine flow passage component material

International Nuclear Information System (INIS)

Liu, J; Lu, L; Zhu, L

2012-01-01

A rotating and jet experiment system with high flow velocity is designed to study the anti-erosion performance of materials. The resultant velocity of the experiment system is high to 120 m/s. The anti-erosion performance of materials used in needle and nozzle and bucket of Pelton turbine, which is widely used in power station with high head and little discharge, was studied in detail by this experiment system. The experimental studies were carried with different resultant velocities and sediment concentrations. Multiple linear regression analysis method was applied to get the exponents of velocity and sediment concentration. The exponents for different materials are different. The exponents of velocity ranged from 3 to 3.5 for three kinds of material. And the exponents of sediment concentration ranged from 0.97 to 1.03 in this experiment. The SEM analysis on the erosion surface of different materials was also carried. On the erosion condition with high resultant impact velocity, the selective cutting loss of material is the mainly erosion mechanism for metal material.

Is Performance in Task-Cuing Experiments Mediated by Task Set Selection or Associative Compound Retrieval?

Science.gov (United States)

Forrest, Charlotte L. D.; Monsell, Stephen; McLaren, Ian P. L.

2014-01-01

Task-cuing experiments are usually intended to explore control of task set. But when small stimulus sets are used, they plausibly afford learning of the response associated with a combination of cue and stimulus, without reference to tasks. In 3 experiments we presented the typical trials of a task-cuing experiment: a cue (colored shape) followed,…

Neutron source characterization for materials experiments

International Nuclear Information System (INIS)

Greenwood, L.R.

1982-01-01

Data are presented from HFIR-CTR32, EBRII-X287, and the Omega West Reactor. An important new source of damage in nickel arises from the 340 keV 56 Fe recoil from the 59 Ni(n,α) reaction used to produce high helium levels in materials irradiations in a thermal spectrum. The status of all other experiments is summarized

Analysis of material flow in metal forming processes by using computer simulation and experiment with model material

International Nuclear Information System (INIS)

Kim, Heon Young; Kim, Dong Won

1993-01-01

The objective of the present study is to analyze material flow in the metal forming processes by using computer simulation and experiment with model material, plasticine. A UBET program is developed to analyze the bulk flow behaviour of various metal forming problems. The elemental strain-hardening effect is considered in an incremental manner and the element system is automatically regenerated at every deforming step in the program. The material flow behaviour in closed-die forging process with rib-web type cavity are analyzed by UBET and elastic-plastic finite element method, and verified by experiments with plasticine. There were good agreements between simulation and experiment. The effect of corner rounding on material flow behavior is investigated in the analysis of backward extrusion with square die. Flat punch indentation process is simulated by UBET, and the results are compared with that of elastic-plastic finite element method. (Author)

Designing Meaningful Game Experiences for Rehabilitation and Sustainable Mobility Settings

Directory of Open Access Journals (Sweden)

Silvia Gabrielli

2014-03-01

Full Text Available This paper presents the approach followed in two ongoing research projects aimed to designing meaningful game-based experiences to support home rehabilitation, eco-sustainable mobility goals and more in general better daily lifestyles. We first introduce the need for designing meaningful game-based experiences that are well-connected to the relevant non-game settings and can be customized by/for users, then, we show examples of how this approach can be realized in the rehabilitation and sustainable mobility contexts.

The materials irradiation experiment for testing plasma facing materials at fusion relevant conditions

Energy Technology Data Exchange (ETDEWEB)

Garrison, L. M., E-mail: garrisonlm@ornl.gov; Egle, B. J. [Oak Ridge National Laboratory, 1 Bethel Valley Road, Oak Ridge, Tennessee 37831 (United States); Fusion Technology Institute, University of Wisconsin-Madison, 1500 Engineering Drive, Madison, Wisconsin 53706 (United States); Zenobia, S. J.; Kulcinski, G. L.; Santarius, J. F. [Fusion Technology Institute, University of Wisconsin-Madison, 1500 Engineering Drive, Madison, Wisconsin 53706 (United States)

2016-08-15

The Materials Irradiation Experiment (MITE-E) was constructed at the University of Wisconsin-Madison Inertial Electrostatic Confinement Laboratory to test materials for potential use as plasma-facing materials (PFMs) in fusion reactors. PFMs in fusion reactors will be bombarded with x-rays, neutrons, and ions of hydrogen and helium. More needs to be understood about the interactions between the plasma and the materials to validate their use for fusion reactors. The MITE-E simulates some of the fusion reactor conditions by holding samples at temperatures up to 1000 °C while irradiating them with helium or deuterium ions with energies from 10 to 150 keV. The ion gun can irradiate the samples with ion currents of 20 μA–500 μA; the typical current used is 72 μA, which is an average flux of 9 × 10{sup 14} ions/(cm{sup 2} s). The ion gun uses electrostatic lenses to extract and shape the ion beam. A variable power (1-20 W), steady-state, Nd:YAG laser provides additional heating to maintain a constant sample temperature during irradiations. The ion beam current reaching the sample is directly measured and monitored in real-time during irradiations. The ion beam profile has been investigated using a copper sample sputtering experiment. The MITE-E has successfully been used to irradiate polycrystalline and single crystal tungsten samples with helium ions and will continue to be a source of important data for plasma interactions with materials.

Set-up of experiment R606

CERN Multimedia

CERN PhotoLab

1976-01-01

Experiment R606 (Aachen, CERN, Harvard, Munich, Northwestern, Riverside)installed in the specially constructed pit at intersection 6. It was designed to investigate production of new particles in the fragmentation and diffraction regions. Use was made of a toroidal field provided by 12 flat copper coils, seen here as the rays of a wheel; in the free spaces between coils are housed Cerenkov counters. These counters, together with calorimetric shower detectors, located behind the magnet, provide separation of electrons from hadrons. The momenta of particles going through the system are measured with two sets of three drift chambers, two in front of the magnet, one behind, whose size increases from 1.5 m for the one seen in the picture, to 5 m for the one on the back. On the right the thin- walled cylindrical vacuum chamber.

Setting science free from materialism.

Science.gov (United States)

Sheldrake, Rupert

2013-01-01

Contemporary science is based on the claim that all reality is material or physical. There is no reality but material reality. Consciousness is a by-product of the physical activity of the brain. Matter is unconscious. Evolution is purposeless. This view is now undergoing a credibility crunch. The biggest problem of all for materialism is the existence of consciousness. Panpsychism provides a way forward. So does the recognition that minds are not confined to brains. Copyright © 2013 Elsevier Inc. All rights reserved.

A review of low density porous materials used in laser plasma experiments

Science.gov (United States)

Nagai, Keiji; Musgrave, Christopher S. A.; Nazarov, Wigen

2018-03-01

This review describes and categorizes the synthesis and properties of low density porous materials, which are commonly referred to as foams and are utilized for laser plasma experiments. By focusing a high-power laser on a small target composed of these materials, high energy and density states can be produced. In the past decade or so, various new target fabrication techniques have been developed by many laboratories that use high energy lasers and consequently, many publications and reviews followed these developments. However, the emphasis so far has been on targets that did not utilize low density porous materials. This review therefore, attempts to redress this balance and endeavors to review low density materials used in laser plasma experiments in recent years. The emphasis of this review will be on aspects of low density materials that are of relevance to high energy laser plasma experiments. Aspects of low density materials such as densities, elemental compositions, macroscopic structures, nanostructures, and characterization of these materials will be covered. Also, there will be a brief mention of how these aspects affect the results in laser plasma experiments and the constrictions that these requirements put on the fabrication of low density materials relevant to this field. This review is written from the chemists' point of view to aid physicists and the new comers to this field.

Some relevant parameters for assessing fire hazards of combustible mine materials using laboratory scale experiments.

Science.gov (United States)

Litton, Charles D; Perera, Inoka E; Harteis, Samuel P; Teacoach, Kara A; DeRosa, Maria I; Thomas, Richard A; Smith, Alex C

2018-04-15

When combustible materials ignite and burn, the potential for fire growth and flame spread represents an obvious hazard, but during these processes of ignition and flaming, other life hazards present themselves and should be included to ensure an effective overall analysis of the relevant fire hazards. In particular, the gases and smoke produced both during the smoldering stages of fires leading to ignition and during the advanced flaming stages of a developing fire serve to contaminate the surrounding atmosphere, potentially producing elevated levels of toxicity and high levels of smoke obscuration that render the environment untenable. In underground mines, these hazards may be exacerbated by the existing forced ventilation that can carry the gases and smoke to locations far-removed from the fire location. Clearly, materials that require high temperatures (above 1400 K) and that exhibit low mass loss during thermal decomposition, or that require high heat fluxes or heat transfer rates to ignite represent less of a hazard than materials that decompose at low temperatures or ignite at low levels of heat flux. In order to define and quantify some possible parameters that can be used to assess these hazards, small-scale laboratory experiments were conducted in a number of configurations to measure: 1) the toxic gases and smoke produced both during non-flaming and flaming combustion; 2) mass loss rates as a function of temperature to determine ease of thermal decomposition; and 3) mass loss rates and times to ignition as a function of incident heat flux. This paper describes the experiments that were conducted, their results, and the development of a set of parameters that could possibly be used to assess the overall fire hazard of combustible materials using small scale laboratory experiments.

Using Goal-Setting Strategies To Enrich the Practicum and Internship Experiences of Beginning Counselors.

Science.gov (United States)

Curtis, Russell C.

2000-01-01

Goal setting can be an effective way to help beginning counselors focus on important developmental issues. This article argues that counselors and supervisors must consider issues related to goal-setting theory and understand the process by which goals are set so that optimal learning experiences are created. (Author/MKA)

Susceptibility of materials processing experiments to low-level accelerations

Science.gov (United States)

Naumann, R. J.

1981-01-01

The types of material processing experiments being considered for shuttle can be grouped into four categories: (1) contained solidification experiment; (2) quasicontainerless experiments; (3) containerless experiments; and (4) fluids experiments. Low level steady acceleration, compensated and uncompensated transient accelerations, and rotation induced flow factors that must be considered in the acceleration environment of a space vehicle whose importance depends on the type of experiment being performed. Some control of these factors may be exercised by the location and orientation of the experiment relative to shuttle and by the orbit vehicle attitude chosen for mission. The effects of the various residual accelerations can have serious consequence to the control of the experiment and must be factored into the design and operation of the apparatus.

National Educators' Workshop: Update 2002 - Standard Experiments in Engineering, Materials Science, and Technology

Science.gov (United States)

Prior, Edwin J. (Compiler); Jacobs, James A. (Compiler); Chung, W. Richard (Compiler)

2003-01-01

This document contains a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 2002 held in San Jose, California, October 13-16,2002. This publication provides experiments and demonstrations that can serve as a valuable guide to faculty who are interested in useful activities for their students. The material was the result of years of research aimed at better methods of teaching technical subjects. The experiments developed by faculty, scientists, and engineers throughout the United States and abroad add to the collection from past workshops. They include a blend of experiments on new materials and traditional materials.

Irradiation experiments and materials testing capabilities in High Flux Reactor in Petten

International Nuclear Information System (INIS)

Luzginova, N.; Blagoeva, D.; Hegeman, H.; Van der Laan, J.

2011-01-01

The text of publication follows: The High Flux Reactor (HFR) in Petten is a powerful multi-purpose research and materials testing reactor operating for about 280 Full Power Days per year. In combination with hot cells facilities, HFR provides irradiation and post-irradiation examination services requested by nuclear energy research and development programs, as well as by industry and research organizations. Using a variety of the custom developed irradiation devices and a large experience in executing irradiation experiments, the HFR is suitable for fuel, materials and components testing for different reactor types. Irradiation experiments carried out at the HFR are mainly focused on the understanding of the irradiation effects on materials; and providing databases for irradiation behavior of materials to feed into safety cases. The irradiation experiments and materials testing at the HFR include the following issues. First, materials irradiation to support the nuclear plant life extensions, for instance, characterization of the reactor pressure vessel stainless steel claddings to insure structural integrity of the vessel, as well as irradiation of the weld material coupons to neutron fluence levels that are representative for Light Water Reactors (LWR) internals applications. Secondly, development and qualification of the structural materials for next generation nuclear fission reactors as well as thermo-nuclear fusion machines. The main areas of interest are in both conventional stainless steel and advanced reduced activation steels and special alloys such as Ni-base alloys. For instance safety-relevant aspects of High Temperature Reactors (HTR) such as the integrity of fuel and structural materials with increasing neutron fluence at typical HTR operating conditions has been recently assessed. Thirdly, support of the fuel safety through several fuel irradiation experiments including testing of pre-irradiated LWR fuel rods containing UO 2 or MOX fuel. Fourthly

Sample positioning in neutron diffraction experiments using a multi-material fiducial marker

Energy Technology Data Exchange (ETDEWEB)

Marais, D., E-mail: Deon.Marais@necsa.co.za [Research and Development Division, South African Nuclear Energy Corporation (Necsa) SOC Limited, PO Box 582, Pretoria 0001 (South Africa); School of Mechanical and Nuclear Engineering, North-West University, Potchefstroom 2520 (South Africa); Venter, A.M., E-mail: Andrew.Venter@necsa.co.za [Research and Development Division, South African Nuclear Energy Corporation (Necsa) SOC Limited, PO Box 582, Pretoria 0001 (South Africa); Faculty of Agriculture Science and Technology, North-West University, Mahikeng 2790 (South Africa); Markgraaff, J., E-mail: Johan.Markgraaff@nwu.ac.za [School of Mechanical and Nuclear Engineering, North-West University, Potchefstroom 2520 (South Africa); James, J., E-mail: Jon.James@open.ac.uk [Faculty of Mathematics, Computing and Technology, The Open University, Milton Keynes, MK76AA England (United Kingdom)

2017-01-01

An alternative sample positioning method is reported for use in conjunction with sample positioning and experiment planning software systems deployed on some neutron diffraction strain scanners. In this approach, the spherical fiducial markers and location trackers used with optical metrology hardware are replaced with a specifically designed multi-material fiducial marker that requires one diffraction measurement. In a blind setting, the marker position can be determined within an accuracy of ±164 µm with respect to the instrument gauge volume. The scheme is based on a pre-determined relationship that links the diffracted peak intensity to the absolute positioning of the fiducial marker with respect to the instrument gauge volume. Two methods for establishing the linking relationship are presented, respectively based on fitting multi-dimensional quadratic functions and a cross-correlation artificial neural network.

On the effective atomic number and electron density: A comprehensive set of formulas for all types of materials and energies above 1 keV

DEFF Research Database (Denmark)

Manohara, S.R.; Hanagodimath, S.M.; Thind, K.S.

2008-01-01

A comprehensive and consistent set of formulas is given for calculating the effective atomic number and electron density for all types of materials and for all photon energies greater than 1 keV. The are derived from first principles using photon interaction cross sections of the constituent atom....... The theory is illustrated by calculations and experiments for molecules of medical and biological interest, glasses for radiation shielding, alloys, minerals and liquids....

Performance of fast-setting impression materials in the reproduction of subgingival tooth surfaces without soft tissue retraction.

Science.gov (United States)

Rudolph, Heike; Röhl, Andreas; Walter, Michael H; Luthardt, Ralph G; Quaas, Sebastian

2014-01-01

Fast-setting impression materials may be prone to inaccuracies due to accidental divergence from the recommended mixing protocol. This prospective randomized clinical trial aimed to assess three-dimensional (3D) deviations in the reproduction of subgingival tooth surfaces and to determine the effect of either following or purposely diverging from the recommended mixing procedure for a fast-setting addition-curing silicone (AS) and fast-setting polyether (PE). After three impressions each were taken from 96 participants, sawcut gypsum casts were fabricated with a standardized procedure and then optically digitized. Data were assessed with a computer-aided 3D analysis. For AS impressions, multivariate analysis of variance revealed a significant influence of the individual tooth and the degree to which the recommended mixing protocol was violated. For PE impressions, the ambient air temperature and individual tooth showed significant effects, while divergence from the recommended mixing protocol was not of significance. The fast-setting PE material was not affected by changes in the recommended mixing protocol. For the two fast-setting materials examined, no divergences from the recommended mixing protocol of less than 2 minutes led to failures in the reproduction of the subgingival tooth surfaces.

Birth setting, labour experience, and postpartum psychological distress.

Science.gov (United States)

MacKinnon, Anna L; Yang, Lisa; Feeley, Nancy; Gold, Ian; Hayton, Barbara; Zelkowitz, Phyllis

2017-07-01

although psychosocial risk factors have been identified for postpartum depression (PPD) and perinatal posttraumatic stress disorder (PTSD), the role of labour- and birth-related factors remains unclear. The present investigation explored the impact of birth setting, subjective childbirth experience, and their interplay, on PPD and postpartum PTSD. in this prospective longitudinal cohort study, three groups of women who had vaginal births at a tertiary care hospital, a birthing center, and those transferred from the birthing centre to the tertiary care hospital were compared. Participants were followed twice during pregnancy (12-14 and 32-34 weeks gestation) and twice after childbirth (1-3 and 7-9 weeks postpartum). symptoms of PPD and PTSD did not significantly differ between birth groups; however, measures of subjective childbirth experience and obstetric factors did. Moderation analyses indicated a significant interaction between pain and birth group, such that higher ratings of pain among women who were transferred was associated with greater symptoms of postpartum PTSD. women who are transferred appear to have a unique experience that may put them at greater risk for postpartum psychological distress. It may be beneficial for care providers to help prepare women for pain management and potential unexpected complications, particularly if it is their first childbirth. Copyright © 2017 Elsevier Ltd. All rights reserved.

COMPARING INTRA- AND INTERENVIRONMENTAL PARAMETERS OF OPTIMAL SETTING IN BREEDING EXPERIMENTS

Directory of Open Access Journals (Sweden)

Domagoj Šimić

2004-06-01

Full Text Available A series of biometrical and quantitative-genetic parameters, not well known in Croatia, are being used for the most important agronomic traits to determine optimal genotype setting within a location as well as among locations. Objectives of the study are to estimate and to compare 1 parameters of intra-environment setting (effective mean square error EMSE, in lattice design, relative efficiency RE, of lattice design LD, compared to randomized complete block design RCBD, and repeatability Rep, of a plot value, and 2 operative heritability h2, as a parameter of inter-environment setting in an experiment with 72 maize hybrids. Trials were set up at four environments (two locations in two years evaluating grain yield and stalk rot. EMSE values corresponded across environments for both traits, while the estimations for RE of LD varied inconsistently over environments and traits. Rep estimates were more different over environments than traits. Rep values did not correspond with h2 estimates: Rep estimates for stalk rot were higher than those for grain yield, while h2 for grain yield was higher than for stalk rot in all instances. Our results suggest that due to importance of genotype × environment interaction, there is a need for multienvironment trials for both traits. If the experiment framework should be reduced due to economic or other reasons, decreasing number of locations in a year rather than decreasing number of years of investigation is recommended.

National Educators' Workshop. Update 92: Standard Experiments in Engineering Materials Science and Technology

Science.gov (United States)

Gardner, James E. (Compiler); Jacobs, James A. (Compiler); Craig, Douglas F. (Compiler)

1993-01-01

This document contains a collection of experiments presented and demonstrated at the workshop. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community.

Servicing HEP experiments with a complete set of ready integreated and configured common software components

International Nuclear Information System (INIS)

Roiser, Stefan; Gaspar, Ana; Perrin, Yves; Kruzelecki, Karol

2010-01-01

The LCG Applications Area at CERN provides basic software components for the LHC experiments such as ROOT, POOL, COOL which are developed in house and also a set of 'external' software packages (70) which are needed in addition such as Python, Boost, Qt, CLHEP, etc. These packages target many different areas of HEP computing such as data persistency, math, simulation, grid computing, databases, graphics, etc. Other packages provide tools for documentation, debugging, scripting languages and compilers. All these packages are provided in a consistent manner on different compilers, architectures and operating systems. The Software Process and Infrastructure project (SPI) [1] is responsible for the continous testing, coordination, release and deployment of these software packages. The main driving force for the actions carried out by SPI are the needs of the LHC experiments, but also other HEP experiments could profit from the set of consistent libraries provided and receive a stable and well tested foundation to build their experiment software frameworks. This presentation will first provide a brief description of the tools and services provided for the coordination, testing, release, deployment and presentation of LCG/AA software packages and then focus on a second set of tools provided for outside LHC experiments to deploy a stable set of HEP related software packages both as binary distribution or from source.

Servicing HEP experiments with a complete set of ready integreated and configured common software components

Energy Technology Data Exchange (ETDEWEB)

Roiser, Stefan; Gaspar, Ana; Perrin, Yves [CERN, CH-1211 Geneva 23, PH Department, SFT Group (Switzerland); Kruzelecki, Karol, E-mail: stefan.roiser@cern.c, E-mail: ana.gaspar@cern.c, E-mail: yves.perrin@cern.c, E-mail: karol.kruzelecki@cern.c [CERN, CH-1211 Geneva 23, PH Department, LBC Group (Switzerland)

2010-04-01

The LCG Applications Area at CERN provides basic software components for the LHC experiments such as ROOT, POOL, COOL which are developed in house and also a set of 'external' software packages (70) which are needed in addition such as Python, Boost, Qt, CLHEP, etc. These packages target many different areas of HEP computing such as data persistency, math, simulation, grid computing, databases, graphics, etc. Other packages provide tools for documentation, debugging, scripting languages and compilers. All these packages are provided in a consistent manner on different compilers, architectures and operating systems. The Software Process and Infrastructure project (SPI) [1] is responsible for the continous testing, coordination, release and deployment of these software packages. The main driving force for the actions carried out by SPI are the needs of the LHC experiments, but also other HEP experiments could profit from the set of consistent libraries provided and receive a stable and well tested foundation to build their experiment software frameworks. This presentation will first provide a brief description of the tools and services provided for the coordination, testing, release, deployment and presentation of LCG/AA software packages and then focus on a second set of tools provided for outside LHC experiments to deploy a stable set of HEP related software packages both as binary distribution or from source.

National Educators' Workshop: Update 95. Standard Experiments in Engineering Materials Science and Technology

Science.gov (United States)

Gardner, James E. (Compiler); Jacobs, James A.; Karnitz, Michael A.

1996-01-01

This document contains a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 95. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community.

Why Is 10 Past 10 the Default Setting for Clocks and Watches in Advertisements? A Psychological Experiment

Directory of Open Access Journals (Sweden)

Ahmed A. Karim

2017-08-01

Full Text Available Have you ever noticed that in watch advertisements the time is usually set at 10:10? The reasons and psychological effects of this default time setting are elusive. In Experiment 1, we hypothesized that watches showing a time setting resembling a smiling face (10:10 would enhance emotional valence and intention to buy compared to a neutral time setting (11:30, whereas a time setting resembling a sad face (8:20 would have the opposite effect. Moreover, we investigated a possible interaction effect with the gender of the participants. In Experiment 2, we directly tested the hypotheses that watches set at 10:10 resemble a smiling face, whereas watches set at 8:20 resemble a sad face. The data of the first experiment reveal that watches set at 10:10 showed a significant positive effect on the emotion of the observer and the intention to buy. However, watches set at 8:20 did not show any effect on the emotion or the intention to buy. Moreover, watches set at 10:10 induced in women significantly stronger ratings of pleasure than in men. The data of the second experiment show that participants consistently perceive high resemblance between watches set at 10:10 and a smiling face as well as high resemblance between watches set at 8:20 and a sad face. This study provides for the first time empirical evidence for the notion that using watches with a time setting resembling a smiling face (like 10:10 can positively affect the emotional response of the observers and their evaluation of a seen watch, even though they are not aware of the fact that the shown time setting is inducing this effect. Practical implications of the observed findings and alternative explanations are discussed.

Why Is 10 Past 10 the Default Setting for Clocks and Watches in Advertisements? A Psychological Experiment.

Science.gov (United States)

Karim, Ahmed A; Lützenkirchen, Britta; Khedr, Eman; Khalil, Radwa

2017-01-01

Have you ever noticed that in watch advertisements the time is usually set at 10:10? The reasons and psychological effects of this default time setting are elusive. In Experiment 1, we hypothesized that watches showing a time setting resembling a smiling face (10:10) would enhance emotional valence and intention to buy compared to a neutral time setting (11:30), whereas a time setting resembling a sad face (8:20) would have the opposite effect. Moreover, we investigated a possible interaction effect with the gender of the participants. In Experiment 2, we directly tested the hypotheses that watches set at 10:10 resemble a smiling face, whereas watches set at 8:20 resemble a sad face. The data of the first experiment reveal that watches set at 10:10 showed a significant positive effect on the emotion of the observer and the intention to buy. However, watches set at 8:20 did not show any effect on the emotion or the intention to buy. Moreover, watches set at 10:10 induced in women significantly stronger ratings of pleasure than in men. The data of the second experiment show that participants consistently perceive high resemblance between watches set at 10:10 and a smiling face as well as high resemblance between watches set at 8:20 and a sad face. This study provides for the first time empirical evidence for the notion that using watches with a time setting resembling a smiling face (like 10:10) can positively affect the emotional response of the observers and their evaluation of a seen watch, even though they are not aware of the fact that the shown time setting is inducing this effect. Practical implications of the observed findings and alternative explanations are discussed.

Mechanical experiments on the superplastic material ALNOVI-1, including leak information

International Nuclear Information System (INIS)

Snippe, Q.H.C.; Meinders, T.

2011-01-01

Research highlights: → Mechanical testing of superplastic materials, in particular ALNOVI-1. → Uniaxial tests to show the one-dimensional stress-strain behaviour and the high amount of strain rate sensitivity. → Void volume fractions have been observed. → Free bulge experiments to show the dependence on the backpressure during the forming stage. → Measuring leak tightness of superplastically formed sheets. → Experiments are used in order to develop a constitutive model in a later stage. - Abstract: In subatomic particle physics, unstable particles can be detected with a so-called vertex detector, placed inside a particle accelerator. A detecting unit close to the accelerator bunch of charged particles must be separated from the accelerator vacuum. A thin sheet with a complex 3D shape prevents the detector vacuum from polluting the accelerator vacuum. Therefore, this sheet has to be completely leak tight. However, this can conflict with restrictions concerning maximum sheet thickness of the product. To produce such a complex thin sheet, superplastic forming can be very attractive in cases where a small number of products is needed. In order to predict gas permeability of these formed sheets, many mechanical experiments are necessary, where the gas leak has to be measured. To obtain insight in the mechanical behaviour of the used material, ALNOVI-1, tensile experiments were performed to describe the uniaxial stress-strain behaviour. From these experiments, a high strain rate sensitivity was measured. The flow stress of this material under superplastic conditions was low and the material behaved in an isotropic manner upon large plastic strains. The results of these experiments were used to predict the forming pressure as a function of time in a free bulge experiment, such that a predefined target strain rate will not be exceeded in the material. An extra parameter within these bulging experiments is the application of a hydrostatic pressure during the

Stratospheric experiments on curing of composite materials

Science.gov (United States)

Chudinov, Viacheslav; Kondyurin, Alexey; Svistkov, Alexander L.; Efremov, Denis; Demin, Anton; Terpugov, Viktor; Rusakov, Sergey

2016-07-01

Future space exploration requires a large light-weight structure for habitats, greenhouses, space bases, space factories and other constructions. A new approach enabling large-size constructions in space relies on the use of the technology of polymerization of fiber-filled composites with a curable polymer matrix applied in the free space environment on Erath orbit. In orbit, the material is exposed to high vacuum, dramatic temperature changes, plasma of free space due to cosmic rays, sun irradiation and atomic oxygen (in low Earth orbit), micrometeorite fluence, electric charging and microgravitation. The development of appropriate polymer matrix composites requires an understanding of the chemical processes of polymer matrix curing under the specific free space conditions to be encountered. The goal of the stratospheric flight experiment is an investigation of the effect of the stratospheric conditions on the uncured polymer matrix of the composite material. The unique combination of low residual pressure, high intensity UV radiation including short-wave UV component, cosmic rays and other aspects associated with solar irradiation strongly influences the chemical processes in polymeric materials. We have done the stratospheric flight experiments with uncured composites (prepreg). A balloon with payload equipped with heater, temperature/pressure/irradiation sensors, microprocessor, carrying the samples of uncured prepreg has been launched to stratosphere of 25-30 km altitude. After the flight, the samples have been tested with FTIR, gel-fraction, tensile test and DMA. The effect of cosmic radiation has been observed. The composite was successfully cured during the stratospheric flight. The study was supported by RFBR grants 12-08-00970 and 14-08-96011.

National Educators' Workshop: Update 2003. Standard Experiments in Engineering, Materials Science, and Technology. Part 2

Science.gov (United States)

Prior, Edwin J. (Compiler); Jacobs, James A. (Compiler); Edmonson, William (Compiler); Wilkerson, Amy (Compiler)

2004-01-01

The 18th Annual National Educators Workshop [NEW:Update 2003] was a part of NASA Langley s celebration of the Centennial of Controlled, Powered Flight by Orville and Wilbur Wright on December 17, 1903. The conference proceedings from NEW:Update 2003 reflect the Flight 100 theme by first providing a historic perspective on the remarkable accomplishments of the Wright Brothers. The historical perspective set the stag for insights into aeronautics and aerospace structures and materials now and into the future. The NEW:Update 2003 proceedings provide valuable resources to educators and students in the form of visuals, experiments and demonstrations for classes/labs at levels ranging from precollege through college education.

National Educators' Workshop: Update 2003. Standard Experiments in Engineering, Materials Science, and Technology. Part 1

Science.gov (United States)

Prior, Edwin J. (Compiler); Jacobs, James A. (Compiler); Edmonson, William (Compiler); Wilkerson, Amy (Compiler)

2004-01-01

The 18th Annual National Educators Workshop [NEW:Update 2003] was a part of NASA Langley s celebration of the Centennial of Controlled, Powered Flight by Orville and Wilbur Wright on December 17, 1903. The conference proceedings from NEW:Update 2003 reflect the Flight 100 theme by first providing a historic perspective on the remarkable accomplishments of the Wright Brothers. The historical perspective set the stag for insights into aeronautics and aerospace structures and materials now and into the future. The NEW:Update 2003 proceedings provide valuable resources to educators and students in the form of visuals, experiments and demonstrations for classes/labs at levels ranging from precollege through college education.

Transcultural healthcare immersion: a unique interprofessional experience poised to influence collaborative practice in cultural settings.

Science.gov (United States)

Morton, Jennifer

2012-01-01

This paper describes a model for interprofessional and transcultural learning established by the author and supported by the University of New England and Ghana Health Mission, Inc. The model for interprofessional immersion in cultural settings represents a guiding framework predicated on a conceptual "brick and mortar" process for building cultural proficiency among individuals and within teams. It encompasses social, clinical and behavioral components (brick) and personal desire, cultural humility and values (mortar). The ``bounty'' aspect of the model is achieved by way of successful student learning outcomes, positive interprofessional and community-based collaborations, and finally, and to be measured over time, favorable patient and population (programmatic) outcomes. In partnership with the Ghana Health Mission, Inc and local community health workers, students and faculty from a range of health professions took part in a cultural-clinical experience known as Transcultural Immersion in Healthcare. The goal of the experience was to advance cultural proficiency and knowledge through intensive cultural immersion. An urban setting in Ghana, located in West Africa served as the setting for this unique experience. The transcultural immersion in healthcare experience achieved its ``bounty'' as seen in the enhanced cultural proficiency of students and faculty, seamless interprofessional communication and collaboration, and provision of primary care and related services to patients and the Ghanaian community. Future research is in development to test the Model for Interprofessional Immersion in Cultural Settings (MIICS) in a variety of other settings and with a cross section of health disciplines.

Preparation of 24 ternary thin film materials libraries on a single substrate in one experiment for irreversible high-throughput studies.

Science.gov (United States)

Buenconsejo, Pio John S; Siegel, Alexander; Savan, Alan; Thienhaus, Sigurd; Ludwig, Alfred

2012-01-09

For different areas of combinatorial materials science, it is desirable to have multiple materials libraries: especially for irreversible high-throughput studies, like, for example, corrosion resistance testing in different media or annealing of complete materials libraries at different temperatures. Therefore a new combinatorial sputter-deposition process was developed which yields 24 materials libraries in one experiment on a single substrate. It is discussed with the example of 24 Ti-Ni-Ag materials libraries. They are divided based on the composition coverage and orientation of composition gradient into two sets of 12 nearly identical materials libraries. Each materials library covers at least 30-40% of the complete ternary composition range. An acid etch test in buffered-HF solution was performed, illustrating the feasibility of our approach for destructive materials characterization. The results revealed that within the composition range of Ni < 30 at.%, the films were severely etched. The composition range which shows reversible martensitic transformations was confirmed to be outside this region. The high output of the present method makes it attractive for combinatorial studies requiring multiple materials libraries.

Material and Virtuality

DEFF Research Database (Denmark)

Kruse Aagaard, Anders

2015-01-01

Through tangible experiments this paper discusses the dialogues between digital architectural drawing and the process of materialisation. The paper sets op the spans between virtual and actual and control and uncertainty making these oppositions a combined spaces where information between a digital...... world and a physical world can interchange. The paper suggest an approach where an overlapping of virtuality and the tangible material output from digital fabrication machines create a method of using materialisation tools as instruments to connect the reality of materials and to an exploring process...... through these experiments is both tangible and directly connected to real actions in digital drawing or material processing but also the base for theoretical contemplations of the relation between virtual and actual and control and uncertainty....

Materials International Space Station Experiment (MISSE): Overview, Accomplishments and Future Needs

Science.gov (United States)

deGroh, Kim K.; Jaworske, Donald A.; Pippin, Gary; Jenkins, Philip P.; Walters, Robert J.; Thibeault, Sheila A.; Palusinski, Iwona; Lorentzen, Justin R.

2014-01-01

Materials and devices used on the exterior of spacecraft in low Earth orbit (LEO) are subjected to environmental threats that can cause degradation in material properties, possibly threatening spacecraft mission success. These threats include: atomic oxygen (AO), ultraviolet and x-ray radiation, charged particle radiation, temperature extremes and thermal cycling, micrometeoroid and debris impacts, and contamination. Space environmental threats vary greatly based on spacecraft materials, thicknesses and stress levels, and the mission environment and duration. For more than a decade the Materials International Space Station Experiment (MISSE) has enabled the study of the long duration environmental durability of spacecraft materials in the LEO environment. The overall objective of MISSE is to test the stability and durability of materials and devices in the space environment in order to gain valuable knowledge on the performance of materials in space, as well as to enable lifetime predictions of new materials that may be used in future space flight. MISSE is a series of materials flight experiments, which are attached to the exterior of the International Space Station (ISS). Individual experiments were loaded onto suitcase-like trays, called Passive Experiment Containers (PECs). The PECs were transported to the ISS in the Space Shuttle cargo bay and attached to, and removed from, the ISS during extravehicular activities (EVAs). The PECs were retrieved after one or more years of space exposure and returned to Earth enabling post-flight experiment evaluation. MISSE is a multi-organization project with participants from the National Aeronautics and Space Administration (NASA), the Department of Defense (DoD), industry and academia. MISSE has provided a platform for environmental durability studies for thousands of samples and numerous devices, and it has produced many tangible impacts. Ten PECs (and one smaller tray) have been flown, representing MISSE 1 through MISSE

Level Set-Based Topology Optimization for the Design of an Electromagnetic Cloak With Ferrite Material

DEFF Research Database (Denmark)

Otomori, Masaki; Yamada, Takayuki; Andkjær, Jacob Anders

2013-01-01

. A level set-based topology optimization method incorporating a fictitious interface energy is used to find optimized configurations of the ferrite material. The numerical results demonstrate that the optimization successfully found an appropriate ferrite configuration that functions as an electromagnetic......This paper presents a structural optimization method for the design of an electromagnetic cloak made of ferrite material. Ferrite materials exhibit a frequency-dependent degree of permeability, due to a magnetic resonance phenomenon that can be altered by changing the magnitude of an externally...

Compositions and use of cementitious materials: experience from Onkalo

International Nuclear Information System (INIS)

Hansen, Johanna

2012-01-01

Johanna Hansen of Posiva in Finland summarised experiences of working with cementitious materials in the Finnish disposal programme. Posiva is responsible for geological disposal of spent nuclear fuel from the Finnish nuclear power plants at Loviisa and Olkiluoto. Posiva plans to submit a construction license application in 2012 and, if approved, repository construction will begin in 2014-2015. The geologic disposal facility will be a KBS-3 type repository at a depth of 400 to 500 m in crystalline bedrock. Construction of the repository will require using a large quantity of cementitious materials. A 2007 estimate indicated that approximately 20 million kilograms of cementitious material will be introduced into the repository, although much of this material will be removed, with only approximately 6 million kilograms remaining in the repository after closure, mostly in the form of tunnel plugs. To minimise the potential negative effects of cementitious materials, low-pH cement and colloidal silica both were studied as alternative materials. Based on experience gained in constructing the ONKALO underground characterisation facility, Posiva decided that from the spring 2008 onwards, mainly low-pH cement will be used as grouting material because the grout cannot be removed for repository closure. The low-pH grout is composed of Portland cement, silica fume, and super-plasticizer. Various recipes were tested in the laboratory, and field mixing and grouting tests were conducted at ONKALO. The effects of organics on radionuclide retention and the leaching of organics from the cement also were evaluated. The studies indicated no impediments to the use of low-pH grout at ONKALO and showed that low-pH cementitious grout has better penetration ability and stiffness than regular grout. It was also concluded that the amount of cementitious materials in the repository can be reduced with careful design; for this, cooperation is needed between repository designers and long

National Educators' Workshop: Update 1991. Standard Experiments in Engineering Materials Science and Technology

International Nuclear Information System (INIS)

Gardner, J.E.; Jacobs, J.A.; Stiegler, J.O.

1992-06-01

Given here is a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 91, held at the Oak Ridge National Laboratory on November 12-14, 1991. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community

National Educators' Workshop: Update 1991. Standard Experiments in Engineering Materials Science and Technology

Science.gov (United States)

Gardner, James E. (Compiler); Jacobs, James A. (Compiler); Stiegler, James O. (Compiler)

1992-01-01

Given here is a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 91, held at the Oak Ridge National Laboratory on November 12-14, 1991. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community.

Accuracy of a reformulated fast-set vinyl polysiloxane impression material using dual-arch trays.

Science.gov (United States)

Kang, Alex H; Johnson, Glen H; Lepe, Xavier; Wataha, John C

2009-05-01

A common technique used for making crown impressions involves use of a vinyl polysiloxane impression material in combination with a dual-arch tray. A leading dental manufacturer has reformulated its vinyl polysiloxane (VPS) impression line, but the accuracy of the new material has not been verified. The purpose of this study was to assess the accuracy of reformulated VPS impression materials using the single-step dual-arch impression technique. Dual-arch impressions were made on a typodont containing a master stainless steel standard crown preparation die, from which gypsum working dies were formed, recovered, and measured. The impression materials evaluated were Imprint 3 Penta Putty with Quick Step Regular Body (IP-0); Imprint 3 Penta Quick Step Heavy Body with Quick Step Light Body (IP-1); Aquasil Ultra Rigid Fast Set with LV Fast Set (AQ-1); and Aquasil Ultra Heavy Fast Set with XLV Fast Set (AQ-2) (n=10). All impressions were disinfected with CaviCide spray for 10 minutes prior to pouring with type IV gypsum. Buccolingual (BL), mesiodistal (MD), and occlusogingival (OG) dimensions were measured and compared to the master die using an optical measuring microscope. Linear dimensional change was also assessed for IP-0 and AQ-1 at 1 and 24 hours based on ANSI/ADA Specification No. 19. Single-factor ANOVA with Dunnett's T3 multiple comparisons was used to compare BL, MD, and OG changes, with hypothesis testing at alpha=.05. A repeated-measures ANOVA was used to compare linear dimensional changes. There were statistical differences among the 4 impression systems for 3 of 4 dimensions of the master die. IP-0 working dies were significantly larger in MD and OG-L dimensions but significantly smaller in the BL dimension. IP-1 working dies were significantly smaller in the BL dimension compared to the master die. With the exception of IP-0, differences detected were small and clinically insignificant. No significant differences were observed for linear dimensional change

Material radioassay and selection for the XENON1T dark matter experiment

Energy Technology Data Exchange (ETDEWEB)

Aprile, E.; Anthony, M.; De Perio, P.; Gao, F.; Goetzke, L.W.; Greene, Z.; Lin, Q.; Messina, M.; Plante, G.; Rizzo, A.; Zhang, Y. [Columbia University, Physics Department, New York, NY (United States); Aalbers, J.; Breur, P.A.; Brown, A.; Colijn, A.P.; Decowski, M.P.; Hogenbirk, E.; Tiseni, A. [Nikhef and the University of Amsterdam, Amsterdam (Netherlands); Agostini, F. [INFN-Laboratori Nazionali del Gran Sasso, L' Aquila (Italy); Gran Sasso Science Institute, L' Aquila (Italy); University of Bologna, Department of Physics and Astrophysics, Bologna (Italy); INFN-Bologna (Italy); Alfonsi, M.; Geis, C.; Grignon, C.; Oberlack, U.; Scheibelhut, M.; Schindler, S. [Johannes Gutenberg-Universitaet Mainz, Institut fuer Physik and Exzellenzcluster PRISMA, Mainz (Germany); Amaro, F.D.; Cardoso, J.M.R.; Lopes, J.A.M.; Santos, J.M.F. dos; Silva, M. [University of Coimbra, LIBPhys, Department of Physics, Coimbra (Portugal); Arneodo, F.; Benabderrahmane, M.L.; Maris, I. [New York University Abu Dhabi, Abu Dhabi (United Arab Emirates); Barrow, P.; Baudis, L.; Di Giovanni, A.; Franco, D.; Galloway, M.; Kessler, G.; Kish, A.; Mayani, D.; Pakarha, P.; Piastra, F.; Wei, Y.; Wulf, J. [University of Zurich, Physik Institut, Zurich (Switzerland); Bauermeister, B. [Johannes Gutenberg-Universitaet Mainz, Institut fuer Physik and Exzellenzcluster PRISMA, Mainz (Germany); Stockholm University, AlbaNova, Oskar Klein Centre, Department of Physics, Stockholm (Sweden); Berger, T.; Brown, E.; Piro, M.C. [Rensselaer Polytechnic Institute, Department of Physics, Applied Physics and Astronomy, Troy, NY (United States); Sivers, M. von [Rensselaer Polytechnic Institute, Troy, NY (United States). Dept. of Physics, Applied Physics and Astronomy; Bern Univ. (Switzerland). Albert Einstein Center for Fundamental Physics; Bruenner, S.; Cichon, D.; Eurin, G.; Hasterok, C.; Lindemann, S.; Lindner, M.; Marrodan Undagoitia, T.; Pizzella, V.; Rauch, L.; Rupp, N.; Schreiner, J.; Simgen, H. [Max-Planck-Institut fuer Kernphysik, Heidelberg (Germany); Bruno, G.; Gallo Rosso, A.; Molinario, A.; Laubenstein, M.; Nisi, S. [INFN-Laboratori Nazionali del Gran Sasso, L' Aquila (Italy); Gran Sasso Science Institute, L' Aquila (Italy); Budnik, R.; Itay, R.; Landsman, H.; Lellouch, D.; Levinson, L.; Manfredini, A.; Priel, N. [Weizmann Institute of Science, Department of Particle Physics and Astrophysics, Rehovot (Israel); Buetikofer, L.; Coderre, D.; Kaminsky, B.; Schumann, M. [Universitaet Freiburg, Physikalisches Institut, Freiburg (Germany); Calven, J.; Conrad, J.; Ferella, A.D.; Pelssers, B. [Stockholm University, AlbaNova, Oskar Klein Centre, Department of Physics, Stockholm (Sweden); Cervantes, M.; Lang, R.F.; Masson, D.; Pienaar, J.; Reichard, S.; Reuter, C. [Purdue University, Department of Physics and Astronomy, West Lafayette, IN (United States); Cussonneau, J.P.; Diglio, S.; Le Calloch, M.; Masbou, J.; Micheneau, K.; Persiani, R.; Thers, D. [Universite de Nantes, SUBATECH, Ecole des Mines de Nantes, CNRS/IN2P3, Nantes (France); Di Gangi, P.; Garbini, M.; Massoli, F.V.; Sartorelli, G.; Selvi, M. [University of Bologna, Department of Physics and Astrophysics, Bologna (Italy); INFN-Bologna (Italy); Fei, J.; Ni, K.; Ye, J. [University of California, Department of Physics, San Diego, CA (United States); Fieguth, A.; Murra, M.; Rosendahl, S.; Weinheimer, C. [Westfaelische Wilhelms-Universitaet Muenster, Institut fuer Kernphysik, Muenster (Germany); Fulgione, W. [INFN-Laboratori Nazionali del Gran Sasso, L' Aquila (Italy); Gran Sasso Science Institute, L' Aquila (Italy); INFN-Torino (Italy); Osservatorio Astrofisico di Torino, Torino (Italy); Grandi, L.; Saldanha, R.; Shockley, E.; Upole, N. [University of Chicago, Department of Physics and Kavli Institute of Cosmological Physics, Chicago, IL (United States); Miguez, B.; Trinchero, G. [INFN-Torino (Italy); Osservatorio Astrofisico di Torino, Torino (Italy); Naganoma, J.; Shagin, P. [Rice University, Department of Physics and Astronomy, Houston, TX (United States); Scotto Lavina, L. [Universite Pierre et Marie Curie, Universite Paris Diderot, CNRS/IN2P3, LPNHE, Paris (France); Stein, A.; Wang, H. [University of California, Physics and Astronomy Department, Los Angeles, CA (United States); Tunnell, C. [Nikhef and the University of Amsterdam, Amsterdam (Netherlands); University of Chicago, Department of Physics and Kavli Institute of Cosmological Physics, Chicago, IL (United States); Collaboration: XENON Collaboration

2017-12-15

The XENON1T dark matter experiment aims to detect weakly interacting massive particles (WIMPs) through low-energy interactions with xenon atoms. To detect such a rare event necessitates the use of radiopure materials to minimize the number of background events within the expected WIMP signal region. In this paper we report the results of an extensive material radioassay campaign for the XENON1T experiment. Using gamma-ray spectroscopy and mass spectrometry techniques, systematic measurements of trace radioactive impurities in over one hundred samples within a wide range of materials were performed. The measured activities allowed for stringent selection and placement of materials during the detector construction phase and provided the input for XENON1T detection sensitivity estimates through Monte Carlo simulations. (orig.)

Materials Science Experiments Under Microgravity - A Review of History, Facilities, and Future Opportunities

Science.gov (United States)

Stenzel, Ch.

2012-01-01

Materials science experiments have been a key issue already since the early days of research under microgravity conditions. A microgravity environment facilitates processing of metallic and semiconductor melts without buoyancy driven convection and sedimentation. Hence, crystal growth of semiconductors, solidification of metallic alloys, and the measurement of thermo-physical parameters are the major applications in the field of materials science making use of these dedicated conditions in space. In the last three decades a large number of successful experiments have been performed, mainly in international collaborations. In parallel, the development of high-performance research facilities and the technological upgrade of diagnostic and stimuli elements have also contributed to providing optimum conditions to perform such experiments. A review of the history of materials science experiments in space focussing on the development of research facilities is given. Furthermore, current opportunities to perform such experiments onboard ISS are described and potential future options are outlined.

Suitability of various materials for porous filters in diffusion experiments

Energy Technology Data Exchange (ETDEWEB)

Aldaba, David; Vidal, Miquel; Rigol, Anna [Univ. de Barcelona (Spain). Dept. de Quimica Analitica; Glaus, Martin; Van Loon, Luc [Paul Scherrer Institut, Villigen PSI (Switzerland). Lab. for Waste Management; Leupin, Olivier [Nagra, Wettingen (Switzerland)

2014-10-01

The suitability of different porous materials (stainless steel, VYCOR {sup registered} glass, Al{sub 2}O{sub 3} and PEEK) for use as confining filters in diffusion experiments was evaluated by measuring the effective diffusion coefficients (D{sub e}) of neutral (HTO) and ionic solutes (Na{sup +}, Cs{sup +}, Sr{sup 2+}, Cl{sup -}, SeO{sub 4}{sup 2-}) in the materials in through-diffusion experiments. For stainless steel filters, the D{sub e} values of the target solutes correlated satisfactorily with their bulk diffusion coefficient in water (D{sub w}); thus, the diffusion process in the stainless steel filters was primarily controlled by the diffusivity of the solvated ions. For the remaining materials, the D{sub e} and D{sub w} values were also correlated for the target solutes, and the geometric factors were in the sequence: VYCOR {sup registered} glass < Al{sub 2}O{sub 3} < PEEK. Stainless steel and VYCOR {sup registered} glass were the most appropriate materials because of their high D{sub e} values, but a specific interaction of caesium with VYCOR {sup registered} glass was hypothesised because the D{sub e} values obtained for this solute were slightly higher than expected.

National Educators' Workshop: Update 1988. Standard Experiments in Engineering Materials Science and Technology

Science.gov (United States)

Gardner, James E. (Compiler); Jacobs, James A. (Compiler)

1990-01-01

Presented here is a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 88, held May 10 to 12, 1988 at the National Institute of Standards and Technology (NIST), Gaithersberg, Maryland. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community.

National Educators' Workshop: Update 1989 Standard Experiments in Engineering Materials Science and Technology

Science.gov (United States)

Gardner, James E. (Compiler); Jacobs, James A. (Compiler)

1990-01-01

Presented here is a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 89, held October 17 to 19, 1989 at the National Aeronautics and Space Administration, Hampton, Virginia. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community.

National Educators' Workshop: Update 1993. Standard Experiments in Engineering Materials Science and Technology

Science.gov (United States)

Gardner, James E. (Compiler); Jacobs, James A. (Compiler)

1994-01-01

This document contains a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 93 held at the NASA Langley Research Center in Hampton, Virginia, on November 3-5, 1993. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community.

Social construction and materiality: the limits of indeterminacy in therapeutic settings.

Science.gov (United States)

Lannamann, J W

1998-01-01

By drawing parallels between the courtroom testimony of a Christian Science practitioner and an intersession conversation between systemic family therapists, I critique the abstract idealism of language-centered social constructionism. I argue that social constructionist inquiry that highlights the indeterminacy of meaning without a corresponding emphasis on the responsive embodied practices of family members glosses over the material conditions shaping the politics of interaction. The implications of this problem are discussed as they relate to the setting of family therapy, where social construction theory is often used to guide practical interventions.

Melting curve of materials: theory versus experiments

International Nuclear Information System (INIS)

Alfe, D; Vocadlo, L; Price, G D; Gillan, M J

2004-01-01

A number of melting curves of various materials have recently been measured experimentally and calculated theoretically, but the agreement between different groups is not always good. We discuss here some of the problems which may arise in both experiments and theory. We also report the melting curves of Fe and Al calculated recently using quantum mechanics techniques, based on density functional theory with generalized gradient approximations. For Al our results are in very good agreement with both low pressure diamond-anvil-cell experiments (Boehler and Ross 1997 Earth Planet. Sci. Lett. 153 223, Haenstroem and Lazor 2000 J. Alloys Compounds 305 209) and high pressure shock wave experiments (Shaner et al 1984 High Pressure in Science and Technology ed Homan et al (Amsterdam: North-Holland) p 137). For Fe our results agree with the shock wave experiments of Brown and McQueen (1986 J. Geophys. Res. 91 7485) and Nguyen and Holmes (2000 AIP Shock Compression of Condensed Matter 505 81) and the recent diamond-anvil-cell experiments of Shen et al (1998 Geophys. Res. Lett. 25 373). Our results are at variance with the recent calculations of Laio et al (2000 Science 287 1027) and, to a lesser extent, with the calculations of Belonoshko et al (2000 Phys. Rev. Lett. 84 3638). The reasons for these disagreements are discussed

Assessment of the Swedish EQ-5D experience-based value sets in a total hip replacement population.

Science.gov (United States)

Nemes, Szilárd; Burström, Kristina; Zethraeus, Niklas; Eneqvist, Ted; Garellick, Göran; Rolfson, Ola

2015-12-01

All patients undergoing elective total hip replacement (THR) in Sweden are asked to complete a survey, including the EQ-5D. Thus far, EQ-5D values have been presented using the UK TTO value set based on hypothetical values. Shift to the use of the recently introduced Swedish experience-based value set, derived from a representative Swedish population, is an appealing alternative. To investigate how accurate the Swedish experience-based VAS value set predicts observed EQ VAS values and to compare correlations between Swedish and UK value sets including two provisional value sets derived from the THR population. Pre- and one-year postoperative data from 56,062 THR patients from the Swedish Hip Arthroplasty Register were used. Agreement between the observed and the predicted EQ VAS values was assessed with correlation. Based on pre- and postoperative data, we constructed two provisional VAS value sets. Correlations between observed and calculated values using the Swedish VAS value set were moderate (r = 0.46) in preoperative data and high (r = 0.72) in postoperative data. Correlations between UK and register-based value sets were constantly lower compared to Swedish value sets. Register-based values and Swedish values were highly correlated. The Swedish value sets are more accurate in terms of representation of the Swedish THR patients than the currently used UK TTO value set. We find it feasible to use the experience-based Swedish value sets for further presentation of EQ-5D values in the Swedish THR population.

Microcosm experiments to control anaerobic redox conditions when studying the fate of organic micropollutants in aquifer material.

Science.gov (United States)

Barbieri, Manuela; Carrera, Jesús; Sanchez-Vila, Xavier; Ayora, Carlos; Cama, Jordi; Köck-Schulmeyer, Marianne; López de Alda, Miren; Barceló, Damià; Tobella Brunet, Joana; Hernández García, Marta

2011-11-01

The natural processes occurring in subsurface environments have proven to effectively remove a number of organic pollutants from water. The predominant redox conditions revealed to be one of the controlling factors. However, in the case of organic micropollutants the knowledge on this potential redox-dependent behavior is still limited. Motivated by managed aquifer recharge practices microcosm experiments involving aquifer material, settings potentially feasible in field applications, and organic micropollutants at environmental concentrations were carried out. Different anaerobic redox conditions were promoted and sustained in each set of microcosms by adding adequate quantities of electron donors and acceptors. Whereas denitrification and sulfate-reducing conditions are easily achieved and maintained, Fe- and Mn-reduction are strongly constrained by the slower dissolution of the solid phases commonly present in aquifers. The thorough description and numerical modeling of the evolution of the experiments, including major and trace solutes and dissolution/precipitation of solid phases, have been proven necessary to the understanding of the processes and closing the mass balance. As an example of micropollutant results, the ubiquitous beta-blocker atenolol is completely removed in the experiments, the removal occurring faster under more advanced redox conditions. This suggests that aquifers constitute a potentially efficient alternative water treatment for atenolol, especially if adequate redox conditions are promoted during recharge and long enough residence times are ensured. Copyright © 2011 Elsevier B.V. All rights reserved.

Flight Experiments for Living With a Star Space Environment Testbed (LWS-SET): Relationship to Technology

Science.gov (United States)

LaBel, Kenneth A.; Barth, Janet L.; Brewer, Dana A.

2003-01-01

This viewgraph presentation provides information on flight validation experiments for technologies to determine solar effects. The experiments are intended to demonstrate tolerance to a solar variant environment. The technologies tested are microelectronics, photonics, materials, and sensors.

Spanish experiences with marginal and special materials on the construction of road embankments

International Nuclear Information System (INIS)

Cano Linares, H.; Perucho Martinez, A.

2015-01-01

The use of existing materials along the alignment of a road is an essential problem within the Sustainable Development policies, which is being promoting worldwide since a long time. In the Word road Association (PIARC-AIPCR) this subject has being investigated by different Technical Committees during last decades. Additionally, the review of the article 330 Embankment of PG-3 (FOM 1382/2002) has opened the door to new non-conventional materials, as wastes and artificial materials, to be used on embankments. This could come to adequate solutions, technically, and environmentally, contributing with national legislation on valorisation policies. In this sense, the use of marginal materials and wastes con represent and important save on natural resources and dumping sites. In Spain, some experiences with marginal materials and wastes have being carried out. The work presented has consisted in compiling and analysing the experiences executed with marginal materials and wastes on Spanish road embankments. Although there are many other cases, 24 cases published with adequate information have being analysed, summarising aspects as: materials problems arrangement solutions or treatments employed. Analysing these experiences and making them public can be a way to transmit confidence, help to improve knowledge, and progress on the preparation of recommendations. This work has being carried out on the frame of the Project Geotechnical Engineering, Materials and Structures and Impact of Infrastructure in Civil engineering (TTIGEM), within the frame Program Border Cooperation Spain-External Borders (POCTEFEX); particularly in the Activity 2 related to Technology Transfer of Construction Materials, including marginal materials and wastes. (Author)

Scaling criteria for rock dynamic experiments

Energy Technology Data Exchange (ETDEWEB)

Crowley, Barbara K [Lawrence Radiation Laboratory, University of California, Livermore, CA (United States)

1970-05-01

A set of necessary conditions for performing scaled rock dynamics experiments is derived from the conservation equations of continuum mechanics. Performing scaled experiments in two different materials is virtually impossible because of the scaling restrictions imposed by two equations of state. However, performing dynamically scaled experiments in the same material is possible if time and distance use the same scaling factor and if the effects of gravity are insignificant. When gravity becomes significant, dynamic scaling is no longer possible. To illustrate these results, example calculations of megaton and kiloton experiments are considered. (author00.

Recommended nuclear criticality safety experiments in support of the safe transportation of fissile material

International Nuclear Information System (INIS)

Tollefson, D.A.; Elliott, E.P.; Dyer, H.R.; Thompson, S.A.

1993-01-01

Validation of computer codes and nuclear data (cross-section) libraries using benchmark quality critical (or certain subcritical) experiments is an essential part of a nuclear criticality safety evaluation. The validation results establish the credibility of the calculational tools for use in evaluating a particular application. Validation of the calculational tools is addressed in several American National Standards Institute/American Nuclear Society (ANSI/ANS) standards, with ANSI/ANS-8.1 being the most relevant. Documentation of the validation is a required part of all safety analyses involving significant quantities of fissile materials. In the case of transportation of fissile materials, the safety analysis report for packaging (SARP) must contain a thorough discussion of benchmark experiments, detailing how the experiments relate to the significant packaging and contents materials (fissile, moderating, neutron absorbing) within the package. The experiments recommended in this paper are needed to address certain areas related to transportation of unirradiated fissile materials in drum-type containers (packagings) for which current data are inadequate or are lacking

Digital breast tomosynthesis (DBT): initial experience in a clinical setting

International Nuclear Information System (INIS)

Skaane, Per; Gullien, Randi; Eben, Ellen B.; Haakenaasen, Unni; Naess Jebsen, Ingvild; Krager, Mona; Bjoerndal, Hilde; Ekseth, Ulrika; Jahr, Gunnar

2012-01-01

Background: Digital breast tomosynthesis (DBT) is a promising new technology. Some experimental clinical studies have shown positive results, but the future role and indications of this new technique, whether in a screening or clinical setting, need to be evaluated. Purpose: To compare digital mammography and DBT in a side-by-side feature analysis for cancer conspicuity, and to assess whether there is a potential additional value of DBT to standard state-of-the-art conventional imaging work-up with respect to detection of additional malignancies. Material and Methods: The study had ethics committee approval. A total of 129 women underwent 2D digital mammography including supplementary cone-down and magnification views and breast ultrasonography if indicated, as well as digital breast tomosynthesis. The indication for conventional imaging in the clinical setting included a palpable lump in 30 (23%), abnormal mammographic screening findings in 54 (42%), and surveillance in 45 (35%) of the women. The women were examined according to present guidelines, including spot-magnification views, ultrasonography, and needle biopsies, if indicated. The DBT examinations were interpreted several weeks after the conventional imaging without knowledge of the conventional imaging findings. In a later session, three radiologists performed a side-by-side feature analysis for cancer conspicuity in a sample of 50 cases. Results: State-of-the-art conventional imaging resulted in needle biopsy of 45 breasts, of which 20 lesions were benign and a total of 25 cancers were diagnosed. The remaining 84 women were dismissed with a normal/definitely benign finding and without indication for needle biopsy. The subsequent DBT interpretation found suspicious findings in four of these 84 women, and these four women had to be called back for repeated work-up with knowledge of the tomosynthesis findings. These delayed work-ups resulted in two cancers (increasing the cancer detection by 8%) and two

Exploring Rural High School Learners' Experience of Mathematics Anxiety in Academic Settings

Science.gov (United States)

Hlalele, Dipane

2012-01-01

The purpose of the study was to explore rural high school learners' experience of mathematics anxiety in academic settings. Mathematics anxiety has been found to have an adverse effect on confidence, motivation and achievement. This quantitative study is exploratory and descriptive in nature. The participants were 403 learners doing mathematics in…

Material control study: a directed graph and fault tree procedure for adversary event set generation

International Nuclear Information System (INIS)

Lambert, H.E.; Lim, J.J.; Gilman, F.M.

1978-01-01

In work for the United States Nuclear Regulatory Commission, Lawrence Livermore Laboratory is developing an assessment procedure to evaluate the effectiveness of a potential nuclear facility licensee's material control (MC) system. The purpose of an MC system is to prevent the theft of special nuclear material such as plutonium and highly enriched uranium. The key in the assessment procedure is the generation and analysis of the adversary event sets by a directed graph and fault-tree methodology

How We Used NASA Lunar Set in Planetary Material Science Analog Studies on Lunar Basalts and Breccias with Industrial Materials of Steels and Ceramics

Science.gov (United States)

Berczi, S.; Cech, V.; Jozsa, S.; Szakmany, G.; Fabriczy, A.; Foldi, T.; Varga, T.

2005-01-01

Analog studies play important role in space materials education. Various aspects of analogies are used in our courses. In this year two main rock types of NASA Lunar Set were used in analog studies in respect of processes and textures with selected industrial material samples. For breccias and basalts on the lunar side, ceramics and steels were found as analogs on the industrial side. Their processing steps were identified on the basis of their textures both in lunar and in industrial groups of materials.

Experiments on thermal conductivity in buffer materials for geologic repository

International Nuclear Information System (INIS)

Kanno, T.; Yano, T.; Wakamatsu, H.; Matsushima, E.

1989-01-01

Engineered barriers for geologic disposal for HLW are planned to consist of canister, overpack and buffer elements. One of important physical characteristics of buffer materials is determining temperature profiles within the near field in a repository. Buffer materials require high thermal conductivity to disperse radiogenic heat away to the host rock. As the buffer materials, compacted blocks of the mixture of sodium bentonite and sand have been the most promising candidate in some countries, e.g. Sweden, Switzerland and Japan. The authors have been carrying out a series of thermal dispersion experiments to evaluate thermal conductivity of bentonite/quartz sand blocks. In this study, the following two factors considered to affect thermal properties of the near field were examined: effective thermal conductivities of buffer materials, and heat transfer characteristics of the gap between overpack and buffer materials

The experience of intimate partner violence in the context of the rural setting

Science.gov (United States)

Roush, karen

Intimate partner violence (IPV) against women is a pervasive health and social problem in the United States; one in three women report being abused by an intimate partner at least once in their lifetime. IPV presents unique challenges to women living in rural areas that increase their vulnerability, limit their options for safety, and hamper efforts to leave an abusive relationship. Yet there is little research examining the lived experience of WV in a general population of women in the rural setting. Also, though there is a large body of research on TV screening and health care providers' attitudes and beliefs, little is known about rural providers specifically. A mixed methods study exploring the lived experience of IPV in women in the context of the rural setting was conducted. Along with qualitative interviews with women with experience of IPV, I conducted a survey to examine the TV-related knowledge, attitudes, beliefs and behaviors of the health care providers who interact with the women. The results from this study form a picture of the lives of women who experience IPV in the rural setting as one of isolation, fear, and uncertainty tempered by determination to understand and overcome the violence. Six major themes were identified, 1) living with violence, 2) protect self, 3) isolation, 4) search for understanding, 5) system level abuse, and 6) creating a new life. In contrast to earlier studies, health care providers demonstrated good overall knowledge and judicious attitudes about IPV and beliefs congruent with available evidence related to IPV. When looked at together the knowledge, attitudes, beliefs, and behaviors of the health care providers were aligned with the experiences voiced by the women participating in the interviews. The results of this study highlight the need for an interprofessional, public health approach that addresses the complex web of individual, social, cultural, economic, and political factors that create and feed the problem.

Modelling of thermal shock experiments of carbon based materials in JUDITH

Science.gov (United States)

Ogorodnikova, O. V.; Pestchanyi, S.; Koza, Y.; Linke, J.

2005-03-01

The interaction of hot plasma with material in fusion devices can result in material erosion and irreversible damage. Carbon based materials are proposed for ITER divertor armour. To simulate carbon erosion under high heat fluxes, electron beam heating in the JUDITH facility has been used. In this paper, carbon erosion under energetic electron impact is modeled by the 3D thermomechanics code 'PEGASUS-3D'. The code is based on a crack generation induced by thermal stress. The particle emission observed in thermal shock experiments is a result of breaking bonds between grains caused by thermal stress. The comparison of calculations with experimental data from JUDITH shows good agreement for various incident power densities and pulse durations. A realistic mean failure stress has been found. Pre-heating of test specimens results in earlier onset of brittle destruction and enhanced particle loss in agreement with experiments.

Modelling of thermal shock experiments of carbon based materials in JUDITH

International Nuclear Information System (INIS)

Ogorodnikova, O.V.; Pestchanyi, S.; Koza, Y.; Linke, J.

2005-01-01

The interaction of hot plasma with material in fusion devices can result in material erosion and irreversible damage. Carbon based materials are proposed for ITER divertor armour. To simulate carbon erosion under high heat fluxes, electron beam heating in the JUDITH facility has been used. In this paper, carbon erosion under energetic electron impact is modeled by the 3D thermomechanics code 'PEGASUS-3D'. The code is based on a crack generation induced by thermal stress. The particle emission observed in thermal shock experiments is a result of breaking bonds between grains caused by thermal stress. The comparison of calculations with experimental data from JUDITH shows good agreement for various incident power densities and pulse durations. A realistic mean failure stress has been found. Pre-heating of test specimens results in earlier onset of brittle destruction and enhanced particle loss in agreement with experiments

Modelling of thermal shock experiments of carbon based materials in JUDITH

Energy Technology Data Exchange (ETDEWEB)

Ogorodnikova, O.V. [Forschungszentrum Juelich, EURATOM-Association, IWV-2, 52425 Juelich (Germany)]. E-mail: o.ogorodnikova@fz-juelich.de; Pestchanyi, S. [Forschungszentrum Karlsruhe, EURATOM-Associaton, IHM, 76021 Karlsruhe (Germany); Koza, Y. [Forschungszentrum Juelich, EURATOM-Association, IWV-2, 52425 Juelich (Germany); Linke, J. [Forschungszentrum Juelich, EURATOM-Association, IWV-2, 52425 Juelich (Germany)

2005-03-01

The interaction of hot plasma with material in fusion devices can result in material erosion and irreversible damage. Carbon based materials are proposed for ITER divertor armour. To simulate carbon erosion under high heat fluxes, electron beam heating in the JUDITH facility has been used. In this paper, carbon erosion under energetic electron impact is modeled by the 3D thermomechanics code 'PEGASUS-3D'. The code is based on a crack generation induced by thermal stress. The particle emission observed in thermal shock experiments is a result of breaking bonds between grains caused by thermal stress. The comparison of calculations with experimental data from JUDITH shows good agreement for various incident power densities and pulse durations. A realistic mean failure stress has been found. Pre-heating of test specimens results in earlier onset of brittle destruction and enhanced particle loss in agreement with experiments.

Applications of simulation experiments in LMFBR core materials technology

International Nuclear Information System (INIS)

Appleby, W.K.

1976-01-01

The development of charged particle bombardment experiments to simulate neutron irradiation induced swelling in austenitic alloys is briefly described. The applications of these techniques in LMFBR core materials technology are discussed. It is shown that use of the techniques to study the behavior of cold-worked Type-316 was instrumental in demonstrating at an early date the need for advanced materials. The simulation techniques then were used to identify alloying elements which can markedly decrease swelling and thus a focused reactor irradiation program is now in place to allow the future use of a lower swelling alloy for LMFBR core components

Experiences of violence, burnout and job satisfaction in Korean nurses in the emergency medical centre setting.

Science.gov (United States)

Yoon, Hee Sook; Sok, Sohyune R

2016-12-01

The aim of this study was to examine the experience of violence in relation to burnout and job satisfaction in Korean nurses in the emergency medical centre setting. Participants were 236 nurses in the emergency medical centre setting of three metropolitan areas in Korea. Measures included a general characteristics form, characteristics related to experiences of violence, the Maslach Burnout Inventory and the Minnesota Satisfaction Questionnaire. Data were collected from June 2013 to February 2014. In the prediction model, 33.4% of burnout was explained and 35.7% for job satisfaction. The greatest influence on burnout was handling violence, followed by verbal abuse. The greatest influence on job satisfaction was physical threat, followed by handling violence. The study shows that burnout and job satisfaction of Korean nurses in the emergency medical centre setting are related to experiences of violence such as verbal abuse, physical threat and physical violence, as well as handling violence. © 2016 John Wiley & Sons Australia, Ltd.

Exploring rural high school learners' experience of mathematics anxiety in academic settings

Directory of Open Access Journals (Sweden)

Dipane Hlalele

2012-01-01

Full Text Available The purpose of the study was to explore rural high school learners' experience of mathematics anxiety in academic settings. Mathematics anxiety has been found to have an adverse effect on confidence, motivation and achievement. This quantitative study is exploratory and descriptive in nature. The participants were 403 learners doing mathematics in 18 rural schools in the Free State province of South Africa. Participants completed a 20-item questionnaire and 373 (92.5% questionnaires were found to contain valid responses and were analysed by a professional statistician at the University of the Free State using the Statistical Package for the Social Sciences (SPSS, Version 17.0. The questionnaire was testedfor reliability using the Cronbach alpha coefficient and was found to have a reliability score of .841, indicating an acceptable reliability coefficient. Findings reveal that all learners sometimes, often, or always experience mathematics anxiety in academic settings. It is therefore important for teachers and authorities in education to observe its prevalence and to implement strategies toward the alleviation of the effects ofmathematics anxiety.

Children's moral experiences of crisis management in a child mental health setting.

Science.gov (United States)

Montreuil, Marjorie; Thibeault, Catherine; McHarg, Linda; Carnevale, Franco A

2018-02-15

The experiences of children related to conflict and crisis management in child mental health settings, especially those aged 12 and below, have been rarely studied. This study examined the moral experiences of children related to conflict and crisis management and the related use of restraint and seclusion in a child mental health setting. A 5-month focused ethnography using a participatory hermeneutic framework was conducted in a day hospital programme for children with severe disruptive disorders within a mental health institute. Children considered restraints and seclusion could help them feel safe in certain instances, for example if another child was being aggressive towards them or in exceptional cases to prevent self-injury. However, their own experiences of being restrained were predominantly negative, especially if not knowing the reason for their use, which they then found unfair. Some of the children emphasized the punitive nature of the use of restraints and seclusion, and most children disagreed with these practices when used as a punishment. Children's perspectives also highlighted the limits of the use of a uniform de-escalation approach by the staff to manage crises. Children considered discussing with the staff and developing a relationship with them as more helpful in case of a crisis then the use of a de-escalation approach or coercive strategies. © 2018 Australian College of Mental Health Nurses Inc.

Experience in nuclear materials accountancy, including the use of computers, in the UKAEA

International Nuclear Information System (INIS)

Anderson, A.R.; Adamson, A.S.; Good, P.T.; Terrey, D.R.

1976-01-01

The UKAEA have operated systems of nuclear materials accountancy in research and development establishments handling large quantities of material for over 20 years. In the course of that time changing requirements for nuclear materials control and increasing quantities of materials have required that accountancy systems be modified and altered to improve either the fundamental system or manpower utilization. The same accountancy principles are applied throughout the Authority but procedures at the different establishments vary according to the nature of their specific requirements; there is much in the cumulative experience of the UKAEA which could prove of value to other organizations concerned with nuclear materials accountancy or safeguards. This paper reviews the present accountancy system in the UKAEA and summarizes its advantages. Details are given of specific experience and solutions which have been found to overcome difficulties or to strengthen previous weak points. Areas discussed include the use of measurements, the establishment of measurement points (which is relevant to the designation of MBAs), the importance of regular physical stock-taking, and the benefits stemming from the existence of a separate accountancy section independent of operational management at large establishments. Some experience of a dual system of accountancy and criticality control is reported, and the present status of computerization of nuclear material accounts is summarized. Important aspects of the relationship between management systems of accountancy and safeguards' requirements are discussed briefly. (author)

Irradiation experiments on materials for core internals, pressure vessel and fuel cladding

Energy Technology Data Exchange (ETDEWEB)

Tsukada, Takashi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1998-03-01

Materials degradation due to the aging phenomena is one of the key issues for the life assessment and extension of the light water reactors (LWRs). This presentation introduces JAERI`s activities in the field of LWR material researches which utilize the research and testing reactors for irradiation experiments. The activities are including the material studies for the core internals, pressure vessel and fuel cladding. These materials are exposed to the neutron/gamma radiation and high temperature water environments so that it is worth reviewing their degradation phenomena as the continuum. Three topics are presented; For the core internal materials, the irradiation assisted stress corrosion cracking (IASCC) of austenitic stainless steels is the present major concern. At JAERI the effects of alloying elements on IASCC have been investigated through the post-irradiation stress corrosion cracking tests in high-temperature water. The radiation embrittlement of pressure vessel steels is still a significant issue for LWR safety, and at JAERI some factors affecting the embrittlement behavior such as a dose rate have been investigated. Waterside corrosion of Zircaloy fuel cladding is one of the limiting factors in fuel rod performance and an in-situ measurement of the corrosion rate in high-temperature water was performed in JMTR. To improve the reliability of experiments and to extent the applicability of experimental techniques, a mutual utilization of the technical achievements in those irradiation experiments is desired. (author)

Improving students’ creative thinking skill through local material-based experiment (LMBE) on protein qualitative test

Science.gov (United States)

Supriyanti, F. M. T.; Halimatul, H. S.

2018-05-01

This study aims to enhance chemistry students’ creative thinking skills using material from local resources on protein qualitative test experiment (LMBE). In this study, a quasi experiment method using one group pretest-postest non-equivalen control group design was carried out on the effectiveness of local material-based experiment approach. The data was collected using the test consists of five assay test and student work sheet (LKM). The effectiveness of the local material-based experiment was tested by means of percentage of normalized gain and score percentage of students’ worksheet. Comparison of creative thinking skills pretest and postest scores showed that the implementation of local material- based experiment (LMBE) enhanced students’s creative thinking skills in experiment class with the value of normalized gain (=0,77) at high category, while in control class reached to =0,44 at medium category. In addition, the LKM shown the enhancements of all aspect of creative thinking skills, including fluency, flexibility, and elaboration skills with the score of in experiment class are 0.79; 0.75; and 0.87 at high category, respectively. In contrast, the only the elaboration skill of control group was improved at high category (=0.76), while fluency and flexibility indicators enhanced at medium category (=0.48 and 0.56, respectively).

A review of analogue modelling of geodynamic processes: Approaches, scaling, materials and quantification, with an application to subduction experiments

Science.gov (United States)

Schellart, Wouter P.; Strak, Vincent

2016-10-01

We present a review of the analogue modelling method, which has been used for 200 years, and continues to be used, to investigate geological phenomena and geodynamic processes. We particularly focus on the following four components: (1) the different fundamental modelling approaches that exist in analogue modelling; (2) the scaling theory and scaling of topography; (3) the different materials and rheologies that are used to simulate the complex behaviour of rocks; and (4) a range of recording techniques that are used for qualitative and quantitative analyses and interpretations of analogue models. Furthermore, we apply these four components to laboratory-based subduction models and describe some of the issues at hand with modelling such systems. Over the last 200 years, a wide variety of analogue materials have been used with different rheologies, including viscous materials (e.g. syrups, silicones, water), brittle materials (e.g. granular materials such as sand, microspheres and sugar), plastic materials (e.g. plasticine), visco-plastic materials (e.g. paraffin, waxes, petrolatum) and visco-elasto-plastic materials (e.g. hydrocarbon compounds and gelatins). These materials have been used in many different set-ups to study processes from the microscale, such as porphyroclast rotation, to the mantle scale, such as subduction and mantle convection. Despite the wide variety of modelling materials and great diversity in model set-ups and processes investigated, all laboratory experiments can be classified into one of three different categories based on three fundamental modelling approaches that have been used in analogue modelling: (1) The external approach, (2) the combined (external + internal) approach, and (3) the internal approach. In the external approach and combined approach, energy is added to the experimental system through the external application of a velocity, temperature gradient or a material influx (or a combination thereof), and so the system is open

Entombment Using Cementitious Materials: Design Considerations and International Experience

Energy Technology Data Exchange (ETDEWEB)

Seitz, Roger Ray

2002-08-01

Cementitious materials have physical and chemical properties that are well suited for the requirements of radioactive waste management. Namely, the materials have low permeability and durability that is consistent with the time frame required for short-lived radionuclides to decay. Furthermore, cementitious materials can provide a long-term chemical environment that substantially reduces the mobility of some long-lived radionuclides of concern for decommissioning (e.g., C-14, Ni-63, Ni-59). Because of these properties, cementitious materials are common in low-level radioactive waste disposal facilities throughout the world and are an attractive option for entombment of nuclear facilities. This paper describes design considerations for cementitious barriers in the context of performance over time frames of a few hundreds of years (directed toward short-lived radionuclides) and time frames of thousands of years (directed towards longer-lived radionuclides). The emphasis is on providing an overview of concepts for entombment that take advantage of the properties of cementitious materials and experience from the design of low-level radioactive waste disposal facilities. A few examples of the previous use of cementitious materials for entombment of decommissioned nuclear facilities and proposals for the use in future decommissioning of nuclear reactors in a few countries are also included to provide global perspective.

Entombment Using Cementitious Materials: Design Considerations and International Experience

Energy Technology Data Exchange (ETDEWEB)

Seitz, R.R.

2002-05-15

Cementitious materials have physical and chemical properties that are well suited for the requirements of radioactive waste management. Namely, the materials have low permeability and durability that is consistent with the time frame required for short-lived radionuclides to decay. Furthermore, cementitious materials can provide a long-term chemical environment that substantially reduces the mobility of some long-lived radionuclides of concern for decommissioning (e.g., C-14, Ni-63, Ni-59). Because of these properties, cementitious materials are common in low-level radioactive waste disposal facilities throughout the world and are an attractive option for entombment of nuclear facilities. This paper describes design considerations for cementitious barriers in the context of performance over time frames of a few hundreds of years (directed toward short-lived radionuclides) and time frames of thousands of years (directed towards longer-lived radionuclides). The emphasis is on providing a n overview of concepts for entombment that take advantage of the properties of cementitious materials and experience from the design of low-level radioactive waste disposal facilities. A few examples of the previous use of cementitious materials for entombment of decommissioned nuclear facilities and proposals for the use in future decommissioning of nuclear reactors in a few countries are also included to provide global perspective.

Entombment Using Cementitious Materials: Design Considerations and International Experience

International Nuclear Information System (INIS)

Seitz, R.R.

2002-01-01

Cementitious materials have physical and chemical properties that are well suited for the requirements of radioactive waste management. Namely, the materials have low permeability and durability that is consistent with the time frame required for short-lived radionuclides to decay. Furthermore, cementitious materials can provide a long-term chemical environment that substantially reduces the mobility of some long-lived radionuclides of concern for decommissioning (e.g., C-14, Ni-63, Ni-59). Because of these properties, cementitious materials are common in low-level radioactive waste disposal facilities throughout the world and are an attractive option for entombment of nuclear facilities. This paper describes design considerations for cementitious barriers in the context of performance over time frames of a few hundreds of years (directed toward short-lived radionuclides) and time frames of thousands of years (directed towards longer-lived radionuclides). The emphasis is on providing a n overview of concepts for entombment that take advantage of the properties of cementitious materials and experience from the design of low-level radioactive waste disposal facilities. A few examples of the previous use of cementitious materials for entombment of decommissioned nuclear facilities and proposals for the use in future decommissioning of nuclear reactors in a few countries are also included to provide global perspective

Friction material composites copper-metal-free material design perspective

CERN Document Server

Sundarkrishnaa, K L

2015-01-01

This book examines material composites used in connection with brake friction, their design and safety. To aid in understanding, the essentials of friction are explained. This second edition was extended to include friction material composites without copper, as they offer an environmentally friendlier option. The second edition is intended to support beginners by offering insights into the essentials of friction material composites, helping them to develop a broader understanding of brake friction materials. Friction materials find wide-ranging applications in household and industrial appliances, brake pads for automotive applications, rail brake friction pads and composition brake blocks. This second edition is an introductory volume to a set of related books, and is based on the author’s experience and expertise with various material manufacturers, brake manufacturers, vehicle manufacturers, researchers and testing labs around the world with which the author has been associated for the past 28 years.

Set of thermal neutron-scattering experiments for the Weapons Neutron Research Facility

International Nuclear Information System (INIS)

Brugger, R.M.

1975-12-01

Six classes of experiments form the base of a program of thermal neutron scattering at the Weapons Neutron Research (WNR) Facility. Three classes are to determine the average microscopic positions of atoms in materials and three are to determine the microscopic vibrations of these atoms. The first three classes concern (a) powder sample neutron diffraction, (b) small angle scattering, and (c) single crystal Laue diffraction. The second three concern (d) small kappa inelastic scattering, (e) scattering surface phonon measurements, and (f) line widths. An instrument to couple with the WNR pulsed source is briefly outlined for each experiment

Randomized controlled clinical trial on the three-dimensional accuracy of fast-set impression materials.

Science.gov (United States)

Rudolph, Heike; Quaas, Sebastian; Haim, Manuela; Preißler, Jörg; Walter, Michael H; Koch, Rainer; Luthardt, Ralph G

2013-06-01

The use of fast-setting impression materials with different viscosities for the one-stage impression technique demands precise working times when mixing. We examined the effect of varying working time on impression precision in a randomized clinical trial. Focusing on tooth 46, three impressions were made from each of 96 volunteers, using either a polyether (PE: Impregum Penta H/L DuoSoft Quick, 3 M ESPE) or an addition-curing silicone (AS: Aquasil Ultra LV, Dentsply/DeTrey), one with the manufacturer's recommended working time (used as a reference) and two with altered working times. All stages of the impression-taking were subject to randomization. The three-dimensional precision of the non-standard working time impressions was digitally analyzed compared to the reference impression. Statistical analysis was performed using multivariate models. The mean difference in the position of the lower right first molar (vs. the reference impression) ranged from ±12 μm for PE to +19 and -14 μm for AS. Significantly higher mean values (+62 to -40 μm) were found for AS compared to PE (+21 to -26 μm) in the area of the distal adjacent tooth. Fast-set impression materials offer high precision when used for single tooth restorations as part of a one-stage impression technique, even when the working time (mixing plus application of the light- and heavy-body components) diverges significantly from the manufacturer's recommended protocol. Best accuracy was achieved with machine-mixed heavy-body/light-body polyether. Both materials examined met the clinical requirements regarding precision when the teeth were completely syringed with light material.

Development of Control Teaching Material for Mechatronics Education Based on Experience

Science.gov (United States)

Tasaki, Takao; Watanabe, Shinichi; Shikanai, Yoshihito; Ozaki, Koichi

In this paper, we have developed a teaching material for technical high school students to understand the control technique. The material makes the students understanding the control technique through the sensibility obtained from the experience of riding the robot. We have considered the correspondence of the teaching material with the ARCS Model. Therefore, the material aims to improve the interest and the willingness to learn mechatronics and control technique by experiencing the difference of the response by the change in the control parameters. As the results of the questionnaire to the technical high school students in the class, we have verified educative effect of the teaching material which can be improved willingness of learning and interesting for mechatronics and control technique.

A framework of analysis for field experiments with alternative materials in road construction.

Science.gov (United States)

François, D; Jullien, A

2009-01-01

In France, a wide variety of alternative materials is produced or exists in the form of stockpiles built up over time. Such materials are distributed over various regions of the territory depending on local industrial development and urbanisation trends. The use of alternative materials at a national scale implies sharing local knowledge and experience. Building a national database on alternative materials for road construction is useful in gathering and sharing information. An analysis of feedback from onsite experiences (back analysis) is essential to improve knowledge on alternative material use in road construction. Back analysis of field studies has to be conducted in accordance with a single common framework. This could enable drawing comparisons between alternative materials and between road applications. A framework for the identification and classification of data used in back analyses is proposed. Since the road structure is an open system, this framework has been based on a stress-response approach at both the material and structural levels and includes a description of external factors applying during the road service life. The proposal has been shaped from a review of the essential characteristics of road materials and structures, as well as from the state of knowledge specific to alternative material characterisation.

Simulated experiments in modern physics

International Nuclear Information System (INIS)

Tirnini, Mahmud Hasan

1981-01-01

Author.In this thesis a number of the basic experiments of atomic and nuclear physics are simulated on a microcomputer interfaced to a chart recorder and CRT. These will induce the student to imagine that he is actually performing the experiments. He will collect data to be worked out. The thesis covers the relevant material to set up such experiments in the modern physics laboratory

Dynamic and impact contact mechanics of geologic materials: Grain-scale experiments and modeling

International Nuclear Information System (INIS)

Cole, David M.; Hopkins, Mark A.; Ketcham, Stephen A.

2013-01-01

High fidelity treatments of the generation and propagation of seismic waves in naturally occurring granular materials is becoming more practical given recent advancements in our ability to model complex particle shapes and their mechanical interaction. Of particular interest are the grain-scale processes that are activated by impact events and the characteristics of force transmission through grain contacts. To address this issue, we have developed a physics based approach that involves laboratory experiments to quantify the dynamic contact and impact behavior of granular materials and incorporation of the observed behavior indiscrete element models. The dynamic experiments do not involve particle damage and emphasis is placed on measured values of contact stiffness and frictional loss. The normal stiffness observed in dynamic contact experiments at low frequencies (e.g., 10 Hz) are shown to be in good agreement with quasistatic experiments on quartz sand. The results of impact experiments – which involve moderate to extensive levels of particle damage – are presented for several types of naturally occurring granular materials (several quartz sands, magnesite and calcium carbonate ooids). Implementation of the experimental findings in discrete element models is discussed and the results of impact simulations involving up to 5 × 105 grains are presented.

Dynamic and impact contact mechanics of geologic materials: Grain-scale experiments and modeling

Energy Technology Data Exchange (ETDEWEB)

Cole, David M.; Hopkins, Mark A.; Ketcham, Stephen A. [Engineer Research and Development Center - Cold Regions Research and Engineering Laboratory, 72 Lyme Rd., Hanover, NH 03755 (United States)

2013-06-18

High fidelity treatments of the generation and propagation of seismic waves in naturally occurring granular materials is becoming more practical given recent advancements in our ability to model complex particle shapes and their mechanical interaction. Of particular interest are the grain-scale processes that are activated by impact events and the characteristics of force transmission through grain contacts. To address this issue, we have developed a physics based approach that involves laboratory experiments to quantify the dynamic contact and impact behavior of granular materials and incorporation of the observed behavior indiscrete element models. The dynamic experiments do not involve particle damage and emphasis is placed on measured values of contact stiffness and frictional loss. The normal stiffness observed in dynamic contact experiments at low frequencies (e.g., 10 Hz) are shown to be in good agreement with quasistatic experiments on quartz sand. The results of impact experiments - which involve moderate to extensive levels of particle damage - are presented for several types of naturally occurring granular materials (several quartz sands, magnesite and calcium carbonate ooids). Implementation of the experimental findings in discrete element models is discussed and the results of impact simulations involving up to 5 Multiplication-Sign 105 grains are presented.

Goal setting with type 2 diabetes: a hermeneutic analysis of the experiences of diabetes educators.

Science.gov (United States)

Fleming, Susan E; Boyd, Angela; Ballejos, Miriam; Kynast-Gales, Susan A; Malemute, Charlene L; Armstrong Shultz, Jill; Vandermause, Roxanne K

2013-01-01

The purpose of this study was to explicate and interpret common experiences of diabetes educators (DEs) with patient goal setting for patients with type 2 diabetes in diabetes education. Transcripts (n = 10) from semi-structured interviews were analyzed using a hermeneutic phenomenological approach to more deeply explore the accounts of DEs' goal setting with patients with type 2 diabetes. The overarching pattern that emerged was "Striking a Balance," which subsumed 4 subthemes: Applying Theoretical-Practical Principles When Setting Goals, Identifying Idealistic-Realistic Expectations, Creating Patient-Educator-Centered Plans, and Readying-Living With Goal Setting. The pattern, "Striking a Balance," revealed a common meaning of DEs as experiences requiring balance and nuance in goal setting with patients. The results of this study combined with the tenets of the self-determination theory can provide the DEs with real-life exemplars and a theoretical framework to encourage their patients to self-manage, increase intrinsic motivation, and improve adherence related to their lifestyle changes and glycemic control. DEs, as facilitators of change, can implement these changes with flexible and reciprocal activities with their patients. The DEs owned these activities and they are: "building the bond," "sharing the session," "readying for change," "sending them home," and "bringing them back."

The Experience of Adolescents and Young Adults Treated for Cancer in an Adult Setting: A Review of the Literature.

Science.gov (United States)

Marshall, Steve; Grinyer, Anne; Limmer, Mark

2018-02-13

The purpose of this review is to explore the literature on the experience of adolescents and young adults (AYAs) having cancer treatment in an adult setting, rather than on a specialist adolescent cancer unit. The integrative review method was used to explore the current literature. Primary research on the topic was located systematically and then synthesized into a thematic narrative. The experience of AYAs undergoing treatment in an adult setting was generally negative. This can be attributed to three themes: feeling isolated in the adult setting; the lack of empathy from staff working in the adult setting; and the inappropriateness of the adult environment for this age group. As many AYAs with cancer will continue to have treatment in adult settings, staff working in this environment should be aware of the negative experience of this cohort and the impact this can have on a vulnerable group of patients. Staff could consider simple ways of improving the AYA experience, such as connecting AYA patients with their peers to reduce isolation; adapting their approach to take account of the unique emotional needs of this age group; and considering ways of making the environment more welcoming and age-appropriate.

Fuzzy sets on step of planning of experiment for organization and management of construction processes

Directory of Open Access Journals (Sweden)

Lapidus Azariy

2016-01-01

Full Text Available In this article, problems of mathematical modeling and experiment planning of the organization and management of construction. The authors designated the basic restrictions and the difficulties in this field. Concluded that the planning of research experiment is possible in the information sphere with using of heuristic, graphical, mathematical models, as well as neural networks and genetic algorithms. The authors note the need for use of expert information in the case of the formalization of quality parameters. The article presented an overview of the translation methods of qualitative information into mathematical language. Comparison of methods the qualimetry of USSR scientists, the analytic hierarchy process and fuzzy set theory were performed. The benefits of the latter for interpretation of qualitative parameters were identified. The authors have given many examples of application fuzzy sets for formalization of organizational factors of construction processes. Finally, there conclusion was made about progressiveness and effectiveness of fuzzy set theory to describe the qualitative parameters of organization and management of construction.

Men's experiences of sexuality after cancer: a material discursive intra-psychic approach.

Science.gov (United States)

Gilbert, Emilee; Ussher, Jane M; Perz, Janette; Wong, W K Tim; Hobbs, Kim; Mason, Catherine

2013-01-01

Men can experience significant changes to their sexuality following the onset of cancer. However, research on men's sexuality post-cancer has focused almost exclusively on those with prostate and testicular cancer, despite evidence that the diagnosis and treatment for most cancers can impact on men's sexuality. This Australian qualitative study explores the experiences of changes to sexuality for 21 men across a range of cancer types and stages, sexual orientations and relationship contexts. Semi-structured interviews were analysed with theoretical thematic analysis guided by a material discursive intra-psychic approach, recognising the materiality of sexual changes, men's intrapsychic experience of such changes within a relational context and the influence of the discursive construction of masculine sexuality. Material changes included erectile difficulty, decreased desire, and difficulty with orgasm. The use of medical aids to minimise the impact of erectile difficulties was shaped by discursive constructions of 'normal' masculine sexuality. The majority of men reported accepting the changes to their sexuality post-cancer and normalised them as part of the natural ageing process. Men's relationship status and context played a key role managing the changes to their sexuality. We conclude by discussing the implications for clinical practice.

Materials on the International Space Station - Forward Technology Solar Cell Experiment

Science.gov (United States)

Walters, R. J.; Garner, J. C.; Lam, S. N.; Vazquez, J. A.; Braun, W. R.; Ruth, R. E.; Lorentzen, J. R.; Bruninga, R.; Jenkins, P. P.; Flatico, J. M.

2005-01-01

This paper describes a space solar cell experiment currently being built by the Naval Research Laboratory (NRL) in collaboration with NASA Glenn Research Center (GRC), and the US Naval Academy (USNA). The experiment has been named the Forward Technology Solar Cell Experiment (FTSCE), and the purpose is to rapidly put current and future generation space solar cells on orbit and provide validation data for these technologies. The FTSCE is being fielded in response to recent on-orbit and ground test anomalies associated with space solar arrays that have raised concern over the survivability of new solar technologies in the space environment and the validity of present ground test protocols. The FTSCE is being built as part of the Fifth Materials on the International Space Station (MISSE) Experiment (MISSE-5), which is a NASA program to characterize the performance of new prospective spacecraft materials when subjected to the synergistic effects of the space environment. Telemetry, command, control, and communication (TNC) for the FTSCE will be achieved through the Amateur Satellite Service using the PCSat2 system, which is an Amateur Radio system designed and built by the USNA. In addition to providing an off-the-shelf solution for FTSCE TNC, PCSat2 will provide a communications node for the Amateur Radio satellite system. The FTSCE and PCSat2 will be housed within the passive experiment container (PEC), which is an approximately 2ft x2ft x 4in metal container built by NASA Langley Research Center (NASA LaRC) as part of the MISSE-5 program. NASA LaRC has also supplied a thin film materials experiment that will fly on the exterior of the thermal blanket covering the PCSat2. The PEC is planned to be transported to the ISS on a Shuttle flight. The PEC will be mounted on the exterior of the ISS by an astronaut during an extravehicular activity (EVA). After nominally one year, the PEC will be retrieved and returned to Earth. At the time of writing this paper, the

Halden fuel and material experiments beyond operational and safety limits

International Nuclear Information System (INIS)

Volkov, Boris; Wiesenack, Wolfgang; McGrath, M.; Tverberg, T.

2014-01-01

One of the main tasks of any research reactor is to investigate the behavior of nuclear fuel and materials prior to their introduction into the market. For commercial NPPs, it is important both to test nuclear fuels at a fuel burn-up exceeding current limits and to investigate reactor materials for higher irradiation dose. For fuel vendors such tests enable verification of fuel reliability or for the safety limits to be found under different operational conditions and accident situations. For the latter, in-pile experiments have to be performed beyond some normal limits. The program of fuel tests performed in the Halden reactor is aimed mainly at determining: The thermal FGR threshold, which may limit fuel operational power with burn-up increase, the “lift-off effect” when rod internal pressure exceeds coolant pressure, the effects of high burn-up on fuel behavior under power ramps, fuel relocation under LOCA simulation at higher burn-up, the effect of dry-out on high burn-up fuel rod integrity. This paper reviews some of the experiments performed in the Halden reactor for understanding some of the limits for standard fuel utilization with the aim of contributing to the development of innovative fuels and cladding materials that could be used beyond these limits. (author)

Design of a materials testing experiment for the INTOR

International Nuclear Information System (INIS)

Vogel, M.A.; Opperman, E.K.

1981-01-01

The United States, Japan, USSR and the European community are jointly participating in the design of an International Tokamak Reactor called INTOR. In support of the US contribution to the INTOR design, the features of an experiment for bulk neutron irradiation damage studies were developed. It is anticipated that materials testing will be an important part of the programmatic mission of INTOR and consequently the requirements for materials testing in INTOR must be identified early in the reactor design to insure compatibility. The design features of the experiment, called a Channel Test, are given in this paper. The major components of the channel test are the water cooled heat sink (channel module) and the specimen capsule. The temperature within each of the 153 specimen capsules is predetermined by engineering the thermal barrier between the specimen capsule and heat sink. Individual capsules can be independently accessed and are designed to operate at a predetermined temperature within the range of 50 to 700 0 C. The total irradiation volume within a single channel test is 45 liters. Features of the channel test that result in experimental versatility and simplified remote access and handling are discussed

Preservice Teachers' Experiences on Accessing Course Materials Using Mobile Devices

Science.gov (United States)

Unal, Zafer; Unal, Aslihan

2014-01-01

This study investigates and reports the first time experiences of mobile device users accessing the course materials on both the web and mobile version of course management system (Web Moodle & Mobile Moodle) during an online course offered at the University of South Florida, St. Petersburg College of Education.

The influence of storage duration on the setting time of type 1 alginate impression material

Science.gov (United States)

Rahmadina, A.; Triaminingsih, S.; Irawan, B.

2017-08-01

Alginate is one of the most commonly used dental impression materials; however, its setting time is subject to change depending on storage conditions and duration. This creates problems because consumer carelessness can affect alginate shelf life and quality. In the present study, the setting times of two groups of type I alginate with different expiry dates was tested. The first group consisted of 11 alginate specimens that had not yet passed the expiry date, and the second group consisted of alginates that had passed the expiry date. The alginate powder was mixed with distilled water, poured into a metal ring, and tested with a polished rod of poly-methyl methacrylate. Statistical analysis showed a significant difference (p<0.05) between the setting times of the alginate that had not passed the expiry date (157 ± 3 seconds) and alginate that had passed the expiry date (144 ± 2 seconds). These findings indicate that storage duration can affect alginate setting time.

Novel gene sets improve set-level classification of prokaryotic gene expression data.

Science.gov (United States)

Holec, Matěj; Kuželka, Ondřej; Železný, Filip

2015-10-28

Set-level classification of gene expression data has received significant attention recently. In this setting, high-dimensional vectors of features corresponding to genes are converted into lower-dimensional vectors of features corresponding to biologically interpretable gene sets. The dimensionality reduction brings the promise of a decreased risk of overfitting, potentially resulting in improved accuracy of the learned classifiers. However, recent empirical research has not confirmed this expectation. Here we hypothesize that the reported unfavorable classification results in the set-level framework were due to the adoption of unsuitable gene sets defined typically on the basis of the Gene ontology and the KEGG database of metabolic networks. We explore an alternative approach to defining gene sets, based on regulatory interactions, which we expect to collect genes with more correlated expression. We hypothesize that such more correlated gene sets will enable to learn more accurate classifiers. We define two families of gene sets using information on regulatory interactions, and evaluate them on phenotype-classification tasks using public prokaryotic gene expression data sets. From each of the two gene-set families, we first select the best-performing subtype. The two selected subtypes are then evaluated on independent (testing) data sets against state-of-the-art gene sets and against the conventional gene-level approach. The novel gene sets are indeed more correlated than the conventional ones, and lead to significantly more accurate classifiers. The novel gene sets are indeed more correlated than the conventional ones, and lead to significantly more accurate classifiers. Novel gene sets defined on the basis of regulatory interactions improve set-level classification of gene expression data. The experimental scripts and other material needed to reproduce the experiments are available at http://ida.felk.cvut.cz/novelgenesets.tar.gz.

Flash autoclave settings may influence eradication but not presence of well-established biofilms on orthopaedic implant material.

Science.gov (United States)

Williams, Dustin L; Taylor, Nicholas B; Epperson, Richard T; Rothberg, David L

2017-10-04

Flash autoclaving is one of the most frequently utilized methods of sterilizing devices, implants or other materials. For a number of decades, it has been common practice for surgeons to remove implantable devices, flash autoclave and then reimplant them in a patient. Data have not yet indicated the potential for biofilms to survive or remain on the surface of orthopaedic-relevant materials following flash autoclave. In this study, monomicrobial and polymicrobial biofilms were grown on the surface of clinically relevant titanium materials and exposed to flash autoclave settings that included varying times and temperatures. Data indicated that when the sterilization and control temperatures of an autoclave were the same, biofilms were able to survive flash autoclaving that was performed for a short duration. Higher temperature and increased duration rendered biofilms non-viable, but none of the autoclave settings had the ability to remove or disperse the presence of biofilms from the titanium surfaces. These findings may be beneficial for facilities, clinics, or hospitals to consider if biofilms are suspected to be present on materials or devices, in particular implants that have had associated infection and are considered for re-implantation. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

A Qualitative Inquiry into Nursing Students’ Experience of Facilitating Reflection in Clinical Setting

Directory of Open Access Journals (Sweden)

Shahnaz Karimi

2017-01-01

Full Text Available Background and Aim. Reflection is known as a skill that is central to nursing students’ professional development. Due to the importance and the role of reflection in clinical areas of nursing, it is important to know how to achieve it. However, nursing trainers face the challenge of how to help their students to improve reflection in clinical settings. The aim of this study was to investigate the nursing students’ experiences of facilitating reflection during clinical practice. This qualitative study was conducted by qualitative content analysis approach. Twenty nursing students during the second to eighth semester of their educational program were selected for participation using purposive sampling. Data were collected through in-depth semistructured interviews. The interview was transcribed verbatim, and qualitative content analysis was used to analyze the data. From the data analysis, four main themes were extracted. Motivation to reflect, complex experiences, efficient trainer, and effective relations were four main themes obtained from study that, in interaction with each other, had facilitating roles in students’ reflective process on experiences. The findings revealed that the nursing students’ reflection in clinical settings is effective in personal and professional level. Reflection of nursing students depends on motivational and educational factors and these factors increase the quality of care in patients. Furthermore, nursing educators need to create nurturing climate as well as supporting reflective behaviors of nursing students.

BACCHUS 2: an in situ backfill hydration experiment for model validation

International Nuclear Information System (INIS)

Volckaert, G.; Bernier, F.; Alonso, E.; Gens, A.

1995-01-01

The BACCHUS 2 experiment is an in situ backfill hydration test performed in the HADES underground research facility situated in the plastic Boom clay layer at 220 m depth. The experiment aims at the optimization and demonstration of an installation procedure for a clay based backfill material. The instrumentation has been optimized in such a way that the results of the experiments can be used for the validation of hydro-mechanical codes such a NOSAT developed at the University of Catalunya Spain (UPC). The experimental set-up consists in a bottom flange and a central filter around which the backfill material was applied. The backfill material consist of a mixture of high density clay pellets and clay powder. The experimental set-up and its instrumentation are described in detail. The results of the hydro-mechanical characterization of the backfill material is summarized. (authors). 8 refs., 16 figs., 1 tab

Pulsed power experiments in hydrodynamics and material properties

CERN Document Server

Reinovsky, R E

1999-01-01

A new application for high performance pulsed power program, the production of high energy density environments in materials for the study of material properties and hydrodynamics in complex geometries, has joined family of radiation source applications in the Stockpile Stewardship. The principle tool for producing high energy density environments is the high precision, magnetically imploded, near-solid density liner. The most attractive pulsed power system for driving such experiments is an ultra-high current, low impedance, microsecond time scale source that is economical both to build and operate. The 25-MJ Atlas capacitor bank system currently under construction at Los Alamos is the first system of its scale specifically designed to drive high precision solid liners. Delivering 30 MA, Atlas will provide liner velocities 12-15 km/sec and kinetic energies of 1-2 MJ /cm with extensive diagnostics and excellent reproducibility. Explosive flux compressor technology provides access to currents exceeding 100 MA ...

Direct containment heating experiments in Zion Nuclear Power Plant geometry using prototypic materials

International Nuclear Information System (INIS)

Binder, J.L.; McUmber, L.M.; Spencer, B.W.

1993-01-01

Direct Containment Heating (DCH) experiments have been completed which utilize prototypic core materials. The experiments reported on here are a continuation of the Integral Effects Testing (IET) DCH program. The experiments incorporated a 1/40 scale model of the Zion Nuclear Power Plant containment structures. The model included representations of the primary system volume, RPV lower head, cavity and instrument tunnel, and the lower containment structures. The experiments were steam driven. Iron-alumina thermite with chromium was used as a core melt stimulant in the earlier IET experiments. These earlier IET experiments at Argonne National Laboratory (ANL) and Sandia National Laboratories (SNL) provided useful data on the effect of scale on DCH phenomena; however, a significant question concerns the potential experiment distortions introduced by the use of non-prototypic iron/alumina thermite. Therefore, further testing with prototypic materials has been carried out at ANL. Three tests have been completed, DCH-U1A, U1B and U2. DCH-U1A and U1B employed an inerted containment atmosphere and are counterpart to the IET-1RR test with iron/alumina thermite. DCH-U2 employed nominally the same atmosphere composition of its counterpart iron/alumina test, IET-6. All tests, with prototypic material, have produced lower peak containment pressure rises; 45, 111 and 185 kPa in U1A, U1B and U2, compared to 150 and 250 kPa IET-1RR and 6. Hydrogen production, due to metal-steam reactions, was 33% larger in U1B and U2 compared to IET-1RR and IET-6. The pressurization efficiency was consistently lower for the corium tests compared to the IET tests

High-speed infrared imaging for material characterization in experimental mechanics experiments

Science.gov (United States)

Gagnon, Marc-André; Marcotte, Frédérick; Lagueux, Philippe; Farley, Vincent; Guyot, Éric; Morton, Vince

2017-10-01

Heat transfers are involved in many phenomena such as friction, tensile stress, shear stress and material rupture. Among the challenges encountered during the characterization of such thermal patterns is the need for both high spatial and temporal resolution. Infrared imaging provides information about surface temperature that can be attributed to the stress response of the material and breaking of chemical bounds. In order to illustrate this concept, tensile and shear tests were carried out on steel, aluminum and carbon fiber composite materials and monitored using high-speed (Telops FASTM2K) and high-definition (Telops HD-IR) infrared imaging. Results from split-Hopkinson experiments carried out on a polymer material at high strain-rate are also presented. The results illustrate how high-speed and high-definition infrared imaging in the midwave infrared (MWIR, 3 - 5 μm) spectral range can provide detailed information about the thermal properties of materials undergoing mechanical testing.

Activity Settings and Daily Routines in Preschool Classrooms: Diverse Experiences in Early Learning Settings for Low-Income Children.

Science.gov (United States)

Fuligni, Allison Sidle; Howes, Carollee; Huang, Yiching; Hong, Sandra Soliday; Lara-Cinisomo, Sandraluz

2012-06-01

This paper examines activity settings and daily classroom routines experienced by 3- and 4-year-old low-income children in public center-based preschool programs, private center-based programs, and family child care homes. Two daily routine profiles were identified using a time-sampling coding procedure: a High Free-Choice pattern in which children spent a majority of their day engaged in child-directed free-choice activity settings combined with relatively low amounts of teacher-directed activity, and a Structured-Balanced pattern in which children spent relatively equal proportions of their day engaged in child-directed free-choice activity settings and teacher-directed small- and whole-group activities. Daily routine profiles were associated with program type and curriculum use but not with measures of process quality. Children in Structured-Balanced classrooms had more opportunities to engage in language and literacy and math activities, whereas children in High Free-Choice classrooms had more opportunities for gross motor and fantasy play. Being in a Structured-Balanced classroom was associated with children's language scores but profiles were not associated with measures of children's math reasoning or socio-emotional behavior. Consideration of teachers' structuring of daily routines represents a valuable way to understand nuances in the provision of learning experiences for young children in the context of current views about developmentally appropriate practice and school readiness.

Automated nuclear material recovery and decontamination of large steel dynamic experiment containers

International Nuclear Information System (INIS)

Dennison, D.K.; Gallant, D.A.; Nelson, D.C.; Stovall, L.A.; Wedman, D.E.

1999-01-01

A key mission of the Los Alamos National Laboratory (LANL) is to reduce the global nuclear danger through stockpile stewardship efforts that ensure the safety and reliability of nuclear weapons. In support of this mission LANL performs dynamic experiments on special nuclear materials (SNM) within large steel containers. Once these experiments are complete, these containers must be processed to recover residual SNM and to decontaminate the containers to below low level waste (LLW) disposal limits which are much less restrictive for disposal purposes than transuranic (TRU) waste limits. The purpose of this paper is to describe automation efforts being developed by LANL for improving the efficiency, increasing worker safety, and reducing worker exposure during the material cleanout and recovery activities performed on these containers

Y2K experiences in the nuclear material control area

International Nuclear Information System (INIS)

Yagi, T.; Suzuki, T.

1999-01-01

Though the Y2K problem was treated by each organization, it became systematic in Japan when Advanced Information and Telecommunication Society Promotion Head-quarters was established recognizing the importance and urgency of the issue. The summary of the action and some experiences concerning Y2K issues in the nuclear materials control area are presented

The effectiveness of three sets of school-based instructional materials and community training on the acquisition and generalization of community laundry skills by students with severe handicaps.

Science.gov (United States)

Morrow, S A; Bates, P E

1987-01-01

This study examined the effectiveness of three sets of school-based instructional materials and community training on acquisition and generalization of a community laundry skill by nine students with severe handicaps. School-based instruction involved artificial materials (pictures), simulated materials (cardboard replica of a community washing machine), and natural materials (modified home model washing machine). Generalization assessments were conducted at two different community laundromats, on two machines represented fully by the school-based instructional materials and two machines not represented fully by these materials. After three phases of school-based instruction, the students were provided ten community training trials in one laundromat setting and a final assessment was conducted in both the trained and untrained community settings. A multiple probe design across students was used to evaluate the effectiveness of the three types of school instruction and community training. After systematic training, most of the students increased their laundry performance with all three sets of school-based materials; however, generalization of these acquired skills was limited in the two community settings. Direct training in one of the community settings resulted in more efficient acquisition of the laundry skills and enhanced generalization to the untrained laundromat setting for most of the students. Results of this study are discussed in regard to the issue of school versus community-based instruction and recommendations are made for future research in this area.

Selecting materialized views in a data warehouse

Science.gov (United States)

Zhou, Lijuan; Liu, Chi; Liu, Daxin

2003-01-01

A Data Warehouse contains lots of materialized views over the data provided by the distributed heterogeneous databases for the purpose of efficiently implementing decision-support or OLAP queries. It is important to select the right view to materialize that answer a given set of queries. In this paper, we have addressed and designed algorithm to select a set of views to materialize in order to answer the most queries under the constraint of a given space. The algorithm presented in this paper aim at making out a minimum set of views, by which we can directly respond to as many as possible user"s query requests. We use experiments to demonstrate our approach. The results show that our algorithm works better. We implemented our algorithms and a performance study of the algorithm shows that the proposed algorithm gives a less complexity and higher speeds and feasible expandability.

Improved set of criticality accident detectors used in the intercomparison experiment in Valduc

International Nuclear Information System (INIS)

Jozefowicz, K.; Golnik, N.

1996-01-01

An improved set of critically accident detectors has been elaborated for the needs of the Inst. of Atomic Energy in Swierk. The sets, which consist of fission track detectors, wide-base silicon diodes and RPL glasses, were tested in the international intercomparison experiment in Valduc, France. Comparison of our results with the reference measurements showed a good agreement (within 25%) for both the neutron and gamma measurements. Additionally, the diode response to neutron kerma was investigated more extensively in the dose range between 2 and 10 Gy, where the dependence of the diode signal versus neutron kerma was not well known. A possibility of the multiple use of the diodes has been proved. (author)

Selection of views to materialize using simulated annealing algorithms

Science.gov (United States)

Zhou, Lijuan; Liu, Chi; Wang, Hongfeng; Liu, Daixin

2002-03-01

A data warehouse contains lots of materialized views over the data provided by the distributed heterogeneous databases for the purpose of efficiently implementing decision-support or OLAP queries. It is important to select the right view to materialize that answer a given set of queries. The goal is the minimization of the combination of the query evaluation and view maintenance costs. In this paper, we have addressed and designed algorithms for selecting a set of views to be materialized so that the sum of processing a set of queries and maintaining the materialized views is minimized. We develop an approach using simulated annealing algorithms to solve it. First, we explore simulated annealing algorithms to optimize the selection of materialized views. Then we use experiments to demonstrate our approach. The results show that our algorithm works better. We implemented our algorithms and a performance study of the algorithms shows that the proposed algorithm gives an optimal solution.

Spherical wave particle velocities in geologic materials from laboratory experiments

International Nuclear Information System (INIS)

Cizek, J.C.; Florence, A.L.

1983-01-01

Particle velocity records that describe spherical waves in rock simulants, tuffs, salt, and granite have been obtained in laboratory experiments. The records aid the modeling of constitutive equations for continuum mechanics codes used in DNA containment research. The technique has also been applied to investigate containment-related problems involving material poperties, failure criteria, scaling, decoupling, and residual strain field relaxation. 22 figures

Analysis of the elastic behaviour of nonclassical nonlinear mesoscopic materials in quasi-static experiments

International Nuclear Information System (INIS)

Ruffino, E.; Scalerandi, M.

2000-01-01

As discovered by recent quasi-static and dynamic resonance experiments, the classical nonlinear theory fails in describing the hysteretic behaviour of nonlinear mesoscopic materials like rocks, concrete, etc. The paper applies the local interaction simulation approach (LISA) for studying such kind of nonclassical nonlinearity. To this purpose, in the LISA treatment of ultrasonic wave propagation has been included a phenomenological model, based on the PM space approach, of the local mesoscopic features of rocks and other materials with localized damages. A quantitative comparison of simulation and experimental results in quasi-static experiments is also presented

A statistical method for predicting sound absorbing property of porous metal materials by using quartet structure generation set

International Nuclear Information System (INIS)

Guan, Dong; Wu, Jiu Hui; Jing, Li

2015-01-01

Highlights: • A random internal morphology and structure generation-growth method, termed as the quartet structure generation set (QSGS), has been utilized based on the stochastic cluster growth theory for numerical generating the various microstructures of porous metal materials. • Effects of different parameters such as thickness and porosity on sound absorption performance of the generated structures are studied by the present method, and the obtained results are validated by an empirical model as well. • This method could be utilized to guide the design and fabrication of the sound-absorption porous metal materials. - Abstract: In this paper, a statistical method for predicting sound absorption properties of porous metal materials is presented. To reflect the stochastic distribution characteristics of the porous metal materials, a random internal morphology and structure generation-growth method, termed as the quartet structure generation set (QSGS), has been utilized based on the stochastic cluster growth theory for numerical generating the various microstructures of porous metal materials. Then by using the transfer-function approach along with the QSGS tool, we investigate the sound absorbing performance of porous metal materials with complex stochastic geometries. The statistical method has been validated by the good agreement among the numerical results for metal rubber from this method and a previous empirical model and the corresponding experimental data. Furthermore, the effects of different parameters such as thickness and porosity on sound absorption performance of the generated structures are studied by the present method, and the obtained results are validated by an empirical model as well. Therefore, the present method is a reliable and robust method for predicting the sound absorption performance of porous metal materials, and could be utilized to guide the design and fabrication of the sound-absorption porous metal materials

Patients' experiences of NPWT in an outpatient setting in Denmark

DEFF Research Database (Denmark)

Ottosen, B; Pedersen, B D

2013-01-01

qualitative interviews regarding their NPWT treatment. The French philosopher, Ricoeur's,theory of interpretation guided the data analysis, which included three levels: naive reading, structural analysis and critical interpretation and discussion. RESULTS: The patients experienced a high level of dependency......OBJECTIVE: To study patients' experiences of negative pressure wound therapy (NPWT) used for wounds of various aetiologies in the outpatient setting and the influences on daily life. METHOD: In this qualitative study, a phenomenological-hermeneutic approach was used. Ten patients underwent......, and they experienced embarrassment about odour,anxiety and uneasiness in relation to complications, a need for relatives' support and other social relation issues. It was important to include relatives as a resource and make use of the opportunity they presented to assist patients during information sessions about...

Teachers' Perceptions of Their Mentoring Role in Three Different Clinical Settings: Student Teaching, Early Field Experiences, and Entry Year Teaching

Science.gov (United States)

Gut, Dianne M.; Beam, Pamela C.; Henning, John E.; Cochran, Deborah C.; Knight, Rhonda Talford

2014-01-01

The purpose of this study was to determine the differences in mentoring across three different clinical settings: student teaching, early field experiences, and entry year teachers. Eighteen teachers with mentoring experience in all three clinical settings were selected and interviewed. The teachers' expectations for teacher development,…

United States experience in the transportation of radioactive materials

International Nuclear Information System (INIS)

Platt, A.M.; Rhoads, R.E.; Hall, R.J.; Williams, L.D.; Brobst, W.A.; Shappert, L.B.; Jefferson, R.M.

1977-01-01

The transport of radioactive material forms a vital link in the nuclear fuel cycle in the United States. Actual U.S. experience and practice with such systems for the packaging and transport of uranium ore concentrates, uranium hexafluoride, fresh fuel, irradiated fuel, non-high-level waste, and plutonium with low heat generation rates are described. Specific shipping systems in current use for these services are illustrated. A comparison will be made of shipping requirements for nuclear parks versus dispersed facilities. Shipping systems for other fuel cycle materials (e.g., high-level waste and cladding hulls) have not been developed because there has been no need to transport these materials commercially. However, conceptual designs for packaging and transport of such materials have been developed. Selected systems are reviewed and summarized. Transport safety in the U.S. is regulated by the U.S. Department of Transportation and the Nuclear Regulatory Commission. Key regulations defining packaging requirements, allowable radiation dose rates, and handling procedures are reviewed. Although the radioactive material shipping industry has an outstanding safety record, opposition to nuclear fuel cycle shipments has surfaced in several areas. The U.S. congressional ban on the shipment of plutonium by air, the actions of New York City to prohibit certain shipments within the city limits, and the requirement of U.S. railroads to ship spent fuel casks only in dedicated trains are reviewed. In an attempt to provide information on the safety margins inherent in the design of radioactive materials packages, ERDA has undertaken a series of accident studies and full scale crash tests that stress the packages beyond the levels expected in severe accidents. In addition, the level of total risk associated with radioactive materials shipments is being evaluated. Current ERDA crash test and transportation risk assessment studies are reviewed. Concern about the possibility of

Phase Change Material Heat Sink for an ISS Flight Experiment

Science.gov (United States)

Quinn, Gregory; Stieber, Jesse; Sheth, Rubik; Ahlstrom, Thomas

2015-01-01

A flight experiment is being constructed to utilize the persistent microgravity environment of the International Space Station (ISS) to prove out operation of a microgravity compatible phase change material (PCM) heat sink. A PCM heat sink can help to reduce the overall mass and volume of future exploration spacecraft thermal control systems (TCS). The program is characterizing a new PCM heat sink that incorporates a novel phase management approach to prevent high pressures and structural deformation that often occur with PCM heat sinks undergoing cyclic operation in microgravity. The PCM unit was made using brazed aluminum construction with paraffin wax as the fusible material. It is designed to be installed into a propylene glycol and water cooling loop, with scaling consistent with the conceptual designs for the Orion Multipurpose Crew Vehicle. This paper reports on the construction of the PCM heat sink and on initial ground test results conducted at UTC Aerospace Systems prior to delivery to NASA. The prototype will be tested later on the ground and in orbit via a self-contained experiment package developed by NASA Johnson Space Center to operate in an ISS EXPRESS rack.

Modeling and experiments of x-ray ablation of National Ignition Facility first wall materials

International Nuclear Information System (INIS)

Anderson, A.T.; Burnham, A.K.; Tobin, M.T.; Peterson, P.F.

1996-01-01

This paper discusses results of modeling and experiments on the x-ray response of selected materials relevant to NIF target chamber design. X-ray energy deposition occurs in such small characteristic depths (on the order of a micron) that thermal conduction and hydrodynamic motion significantly affect the material response, even during the typical 10-ns pulses. The finite-difference ablation model integrates four separate processes: x-ray energy deposition, heat conduction, hydrodynamics, and surface vaporization. Experiments have been conducted at the Nova laser facility in Livermore on response of various materials to NIF-relevant x-ray fluences. Fused silica, Si nitride, B carbide, B, Si carbide, C, Al2O3, and Al were tested. Response was diagnosed using post-shot examinations of the surfaces with SEM and atomic force microscopes. Judgements were made about the dominant removal mechanisms for each material; relative importances of these processes were also studied with the x-ray response model

Teacher Experiences of Delivering an Obesity Prevention Programme (The WAVES Study Intervention) in a Primary School Setting

Science.gov (United States)

Griffin, Tania L; Clarke, Joanne L; Lancashire, Emma R; Pallan, Miranda J; Passmore, Sandra; Adab, Peymane

2015-01-01

Objective: There has been a wealth of childhood obesity prevention studies in school-based settings. However, few have investigated the experiences of school staff charged with delivery of such programmes. This study aimed to elicit teachers' experiences of delivering a childhood obesity prevention programme for children aged 6-7 years. Design:…

Creep of fibrous composite materials

DEFF Research Database (Denmark)

Lilholt, Hans

1985-01-01

Models are presented for the creep behaviour of fibrous composite materials with aligned fibres. The models comprise both cases where the fibres remain rigid in a creeping matrix and cases where the fibres are creeping in a creeping matrix. The treatment allows for several contributions...... to the creep strength of composites. The advantage of combined analyses of several data sets is emphasized and illustrated for some experimental data. The analyses show that it is possible to derive creep equations for the (in situ) properties of the fibres. The experiments treated include model systems...... such as Ni + W-fibres, high temperature materials such as Ni + Ni3Al + Cr3C2-fibres, and medium temperature materials such as Al + SiC-fibres. For the first two systems reasonable consistency is found for the models and the experiments, while for the third system too many unquantified parameters exist...

Set-up of a pre-test mock-up experiment in preparation for the HCPB Breeder Unit mock-up experimental campaign

Energy Technology Data Exchange (ETDEWEB)

Hernández, F., E-mail: francisco.hernandez@kit.edu [Karlsruhe Institute of Technology (KIT), Institute for Neutron Physics and Reactor Technology (INR) (Germany); Kolb, M. [Karlsruhe Institute of Technology (KIT), Institute for Applied Materials (IAM-WPT) (Germany); Ilić, M.; Kunze, A. [Karlsruhe Institute of Technology (KIT), Institute for Neutron Physics and Reactor Technology (INR) (Germany); Németh, J. [KFKI Research Institute for Particle and Nuclear Physics (Hungary); Weth, A. von der [Karlsruhe Institute of Technology (KIT), Institute for Neutron Physics and Reactor Technology (INR) (Germany)

2013-10-15

Highlights: ► As preparation for the HCPB-TBM Breeder Unit out-of-pile testing campaign, a pre-test experiment (PREMUX) has been prepared and described. ► A new heater system based on a wire heater matrix has been developed for imitating the neutronic volumetric heating and it is compared with the conventional plate heaters. ► The test section is described and preliminary thermal results with the available models are presented and are to be benchmarked with PREMUX. ► The PREMUX integration in the air cooling loop L-STAR/LL in the Karlsruhe Institute for Technology is shown and future steps are discussed. -- Abstract: The complexity of the experimental set-up for testing a full-scaled Breeder Unit (BU) mock-up for the European Helium Cooled Pebble Bed Test Blanket Module (HCPB-TBM) has motivated to build a pre-test mock-up experiment (PREMUX) consisting of a slice of the BU in the Li{sub 4}SiO{sub 4} region. This pre-test aims at verifying the feasibility of the methods to be used for the subsequent testing of the full-scaled BU mock-up. Key parameters needed for the modeling of the breeder material is also to be determined by the Hot Wire Method (HWM). The modeling tools for the thermo-mechanics of the pebble beds and for the mock-up structure are to be calibrated and validated as well. This paper presents the setting-up of PREMUX in the L-STAR/LL facility at the Karlsruhe Institute of Technology. A key requirement of the experiments is to mimic the neutronic volumetric heating. A new heater concept is discussed and compared to several conventional heater configurations with respect to the estimated temperature distribution in the pebble beds. The design and integration of the thermocouple system in the heater matrix and pebble beds is also described, as well as other key aspects of the mock-up (dimensions, layout, cooling system, purge gas line, boundary conditions and integration in the test facility). The adequacy of these methods for the full-scaled BU

Progress in mass spectrometry for the analysis of set-off phenomena in plastic food packaging materials.

Science.gov (United States)

Aznar, Margarita; Alfaro, Pilar; Nerín, Cristina; Jones, Emrys; Riches, Eleanor

2016-07-01

In most cases, food packaging materials contain inks whose components can migrate to food by diffusion through the material as well as by set-off phenomena. In this work, different mass spectrometry approaches had been used in order to identify and confirm the presence of ink components in ethanol (95%) and Tenax(®) as food simulants. Three different sets of materials, manufactured with different printing technologies and with different structures, were analyzed. Sample analysis by ultra performance liquid chromatography mass spectrometry (UPLC-MS), using a quadrupole-time of flight (Q-TOF) as a mass analyser proved to be an excellent tool for identification purposes while ion mobility mass spectrometry (IM-MS) shown to be very useful for the confirmation of the candidates proposed. The results showed the presence of different non-volatile ink components in migration such as colorants (Solvent Red 49), plasticizers (dimethyl sebacate, tributyl o-acetyl citrate) or surfactants (SchercodineM, triethylene glycol caprilate). An oxidation product of an ink additive (triphenyl phosphine oxide) was also detected. In addition, a surface analysis technique, desorption electrospray mass spectrometry (DESI-MS), was used for analyzing the distribution of some ink components (tributyl o-acetyl citrate Schercodine L, phthalates) in the material. The detection of some of these compounds in the back-printed side confirmed the transference of this compound from the non-food to the food contact side. The results also showed that concentration of ink migrants decreased when an aluminum or polypropylene layer covered the ink. When aluminum was used, concentration of most of ink migrants decreased, and for 5 out of the 9 even disappeared. Copyright © 2016 Elsevier B.V. All rights reserved.

Integral activation experiment of fusion reactor materials with d-Li neutrons up to 55 MeV

Energy Technology Data Exchange (ETDEWEB)

Maekawa, Fujio; Ikeda, Yujiro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Moellendorff, Ulrich von [Forschungszentrum Karlsruhe, Karlsruhe (Germany); Wada, Masayuki [Business Automation Co., Ltd., Tokyo (Japan)

2000-03-01

An integral activation experiment of fusion reactor materials with a deuteron-lithium neutron source was performed. Since the maximum energy of neutrons produced was 55 MeV, the experiment with associated analysis was one of the first attempts for extending the energy range beyond 20 MeV. The following keywords represent the present study: d-Li neutrons, 55 MeV, dosimetry, SAND-II, spectrum adjustment, LA-150, MCNP, McDeLi, IFMIF, fusion reactor materials, integral activation experiment, low-activation, F82H, vanadium-alloy, IEAF, ALARA, and sequential charged particle reaction. (author)

Exposure to space radiation of high-performance infrared multilayer filters and materials technology experiments (A0056)

Science.gov (United States)

Seeley, J. S.; Hunneman, R.; Whatley, A.; Lipscombe, D. R.

1984-01-01

Infrared multilayer interface filter which were used in satellite radiometers were examined. The ability of the filters to withstand the space environment in these applications is critical. An experiment on the LDEF subjects the filters to authoritative spectral measurements following space exposure to ascertain their suitability for spacecraft use and to permit an understanding of degradation mechanisms. The understanding of the effects of prolonged space exposure on spacecraft materials, surface finishes, and adhesive systems is important to the spacecraft designer. Materials technology experiments and experiment on infrared multilayer filters are discussed.

Applying radiological emergency planning experience to hazardous materials emergency planning within the nuclear industry

International Nuclear Information System (INIS)

Foltman, A.; Newsom, D.; Lerner, K.

1988-01-01

The nuclear industry has extensive radiological emergency planning (REP) experience that is directly applicable to hazardous materials emergency planning. Recently, the Feed Materials Production Center near Cincinnati, Ohio, successfully demonstrated such application. The REP experience includes conceptual bases and standards for developing plans that have been tested in hundreds of full-scale exercises. The exercise program itself is also well developed. Systematic consideration of the differences between chemical and radiological hazards shows that relatively minor changes to the REP bases and standards are necessary. Conduct of full-scale, REP-type exercises serves to test the plans, provide training, and engender confidence and credibility

Physical protection concepts of nuclear materials. The French experience

International Nuclear Information System (INIS)

Arnaud, G.; Artaud, R.

1995-01-01

As the nuclear energy was being developed, it appeared necessary to set up protections against its potential hazards, that should be more complete and elaborate than those implemented on the other industrial installations. This had to be done both in the safety field to prevent the environment and the populations from the consequences of severe casualties, and in the security field to avoid the risk of proliferation and limit to an acceptable level the results of voluntarily provoked accidents and sabotages. Taking advantage of the gathered experience, this document gives consideration to the concepts used in France in order to ensure the physical protection of the nuclear materials. The following topics are tackled: context inside which are envisaged the specific measures, coherence with the general dispositions taken to protect industrial installations, importance and limitations of the part played by the regulations, respective responsibilities of the plant operators and the public authorities, compromise between objectives in view and means to implement, adjustment between the physical protection system and the operating requirements. In addition, the ways in which these systems should be implemented are discussed, underlining the necessity to make progressive steps under a permanent will, in order, first, to update and bring under conformity the old installations, and second, to ensure the maintenance of the systems, taking account of the evolutions of needs and techniques. Those points are commented on examples taken among the different types of installations to be found in France, showing the differences in approach coming from the type and the age of the facilities, and giving the present trends for the new plants. (authors). 1 annexe

Setting research priorities across science, technology, and health sectors: the Tanzania experience.

Science.gov (United States)

de Haan, Sylvia; Kingamkono, Rose; Tindamanyire, Neema; Mshinda, Hassan; Makandi, Harun; Tibazarwa, Flora; Kubata, Bruno; Montorzi, Gabriela

2015-03-12

Identifying research priorities is key to innovation and economic growth, since it informs decision makers on effectively targeting issues that have the greatest potential public benefit. As such, the process of setting research priorities is of pivotal importance for favouring the science, technology, and innovation (STI)-driven development of low- and middle-income countries. We report herein on a major cross-sectoral nationwide research priority setting effort recently carried out in Tanzania by the Tanzania Commission for Science and Technology (COSTECH) in partnership with the Council on Health Research for Development (COHRED) and the NEPAD Agency. The first of its type in the country, the process brought together stakeholders from 42 sub-sectors in science, technology, and health. The cross-sectoral research priority setting process consisted of a 'training-of-trainers' workshop, a demonstration workshop, and seven priority setting workshops delivered to representatives from public and private research and development institutions, universities, non-governmental organizations, and other agencies affiliated to COSTECH. The workshops resulted in ranked listings of research priorities for each sub-sector, totalling approximately 800 priorities. This large number was significantly reduced by an expert panel in order to build a manageable instrument aligned to national development plans that could be used to guide research investments. The Tanzania experience is an instructive example of the challenges and issues to be faced in when attempting to identify research priority areas and setting an STI research agenda in low- and middle-income countries. As countries increase their investment in research, it is essential to increase investment in research management and governance as well, a key and much needed capacity for countries to make proper use of research investments.

Health professionals' experience of teamwork education in acute hospital settings: a systematic review of qualitative literature.

Science.gov (United States)

Eddy, Kylie; Jordan, Zoe; Stephenson, Matthew

2016-04-01

Teamwork is seen as an important element of patient care in acute hospital settings. The complexity of the journey of care for patients highlights the need for health professionals to collaborate and communicate clearly with each other. Health organizations in western countries are committed to improving patient safety through education of staff and teamwork education programs have been integral to this focus. There are no current systematic reviews of the experience of health professionals who participate in teamwork education in acute hospital settings. The objective of this systematic review was to search for the best available evidence on the experiences of health professionals who participate in teamwork education in acute hospital settings. This review considered studies reporting on experiences of registered health professionals who work in acute hospitals. This included medical, nursing and midwifery and allied health professionals. The focus of the meta-synthesis was the experiences and reflections of health professionals who were involved in teamwork education in acute hospital settings. The geographical context for this review was acute hospitals in rural or metropolitan settings in Australia and overseas countries. The review focused on the experiences of health professionals who work in acute hospitals and participated in teamwork education programs. This review considered studies that focused on qualitative data including, but not limited to, designs such as phenomenology, grounded theory, ethnography, action research and feminist research.In the absence of research studies, other text such as opinion papers, discussion papers and reports were considered. Studies published in English and from 1990 to 2013 were included in this review. The literature search for relevant papers occurred between 13 September and 26 October 2013. A three-step search strategy was utilized in this review. The databases searched were PubMed, CINAHL, Embase and Scopus. The

The National Airborne Field Experiment Data Sets

DEFF Research Database (Denmark)

Walker, J. P.; Balling, Jan E.; Bell, M.

2007-01-01

The National Airborne Field Experiment's (NAFE) were a series of intensive experiments recently conducted in different parts of Australia. These hydrologic-focused experiments have been designed to answer a range of questions which can only be resolved through carefully planned and executed field...

An integrated methods study of the experiences of youth with severe disabilities in leisure activity settings: the importance of belonging, fun, and control and choice.

Science.gov (United States)

King, Gillian; Gibson, Barbara E; Mistry, Bhavnita; Pinto, Madhu; Goh, Freda; Teachman, Gail; Thompson, Laura

2014-01-01

The aim was to examine the leisure activity setting experiences of two groups of youth with severe disabilities - those with complex continuing care (CCC) needs and those who have little functional speech and communicate using augmentative and alternative communication (AAC). Twelve youth took part in a mixed methods study, in which their experiences were ascertained using qualitative methods (observations, photo elicitation and interviews) and the measure of Self-Reported Experiences of Activity Settings (SEAS). Data integration occurred using a "following a thread" technique and case-by-case analysis. The analysis revealed several highly valued aspects of leisure activity setting experiences for youth, including engagement with others, enjoying the moment, and control and choice in selection and participation in activity settings. The findings provide preliminary insights into the nature of optimal activity settings for youth with severe disabilities, and the mediators of these experiences. Compared to other youth, the data illustrate both the commonalities of experiences and differences in the ways in which these experiences are attained. Implications for research concern the utility of mixed methods approaches in understanding the complex nature of participation experiences. Implications for clinical practice concern the importance of not assuming the nature of youths' experiences.

Analysis of benchmark critical experiments with ENDF/B-VI data sets

International Nuclear Information System (INIS)

Hardy, J. Jr.; Kahler, A.C.

1991-01-01

Several clean critical experiments were analyzed with ENDF/B-VI data to assess the adequacy of the data for U 235 , U 238 and oxygen. These experiments were (1) a set of homogeneous U 235 -H 2 O assemblies spanning a wide range of hydrogen/uranium ratio, and (2) TRX-1, a simple, H 2 O-moderated Bettis lattice of slightly-enriched uranium metal rods. The analyses used the Monte Carlo program RCP01, with explicit three-dimensional geometry and detailed representation of cross sections. For the homogeneous criticals, calculated k crit values for large, thermal assemblies show good agreement with experiment. This supports the evaluated thermal criticality parameters for U 235 . However, for assemblies with smaller H/U ratios, k crit values increase significantly with increasing leakage and flux-spectrum hardness. These trends suggest that leakage is underpredicted and that the resonance eta of the ENDF/B-VI U 235 is too large. For TRX-1, reasonably good agreement is found with measured lattice parameters (reaction-rate ratios). Of primary interest is rho28, the ratio of above-thermal to thermal U 238 capture. Calculated rho28 is 2.3 (± 1.7) % above measurement, suggesting that U 238 resonance capture remains slightly overpredicted with ENDF/B-VI. However, agreement is better than observed with earlier versions of ENDF/B

Dynamic Data Driven Experiment Control Coordinated with Anisotropic Elastic Material Characterization

Science.gov (United States)

John G. Michopoulos; Tomonari Furukawa; John C. Hermanson; Samuel G. Lambrakos

2011-01-01

The goal of this paper is to propose and demonstrate a multi level design optimization approach for the coordinated determination of a material constitutive model synchronously to the design of the experimental procedure needed to acquire the necessary data. The methodology achieves both online (real-time) and offline design of optimum experiments required for...

Physicists purchase materials testing machine in support of pioneering particle physics experiments

CERN Multimedia

Sharpe, Suzanne

2007-01-01

"The particle physics group at Liverpool University has purchased an LRXPlus singlecolumn materials testing machine from Lloyd Instruments, which will be used to help characterise the carbon-fibre support frames for detectors used for state-of-the-art particle physics experiments." (1 page)

A new level set model for multimaterial flows

Energy Technology Data Exchange (ETDEWEB)

Starinshak, David P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Karni, Smadar [Univ. of Michigan, Ann Arbor, MI (United States). Dept. of Mathematics; Roe, Philip L. [Univ. of Michigan, Ann Arbor, MI (United States). Dept. of AerospaceEngineering

2014-01-08

We present a new level set model for representing multimaterial flows in multiple space dimensions. Instead of associating a level set function with a specific fluid material, the function is associated with a pair of materials and the interface that separates them. A voting algorithm collects sign information from all level sets and determines material designations. M(M ₋1)/2 level set functions might be needed to represent a general M-material configuration; problems of practical interest use far fewer functions, since not all pairs of materials share an interface. The new model is less prone to producing indeterminate material states, i.e. regions claimed by more than one material (overlaps) or no material at all (vacuums). It outperforms existing material-based level set models without the need for reinitialization schemes, thereby avoiding additional computational costs and preventing excessive numerical diffusion.

Advance Care Planning: Understanding Clinical Routines and Experiences of Interprofessional Team Members in Diverse Health Care Settings.

Science.gov (United States)

Arnett, Kelly; Sudore, Rebecca L; Nowels, David; Feng, Cindy X; Levy, Cari R; Lum, Hillary D

2017-12-01

Interprofessional health care team members consider advance care planning (ACP) to be important, yet gaps remain in systematic clinical routines to support ACP. A clearer understanding of the interprofessional team members' perspectives on ACP clinical routines in diverse settings is needed. One hundred eighteen health care team members from community-based clinics, long-term care facilities, academic clinics, federally qualified health centers, and hospitals participated in a 35-question, cross-sectional online survey to assess clinical routines, workflow processes, and policies relating to ACP. Respondents were 53% physicians, 18% advanced practice nurses, 11% nurses, and 18% other interprofessional team members including administrators, chaplains, social workers, and others. Regarding clinical routines, respondents reported that several interprofessional team members play a role in facilitating ACP (ie, physician, social worker, nurse, others). Most (62%) settings did not have, or did not know of, policies related to ACP documentation. Only 14% of settings had a patient education program. Two-thirds of the respondents said that addressing ACP is a high priority and 85% felt that nonphysicians could have ACP conversations with appropriate training. The clinical resources needed to improve clinical routines included training for providers and staff, dedicated staff to facilitate ACP, and availability of patient/family educational materials. Although interprofessional health care team members consider ACP a priority and several team members may be involved, clinical settings lack systematic clinical routines to support ACP. Patient educational materials, interprofessional team training, and policies to support ACP clinical workflows that do not rely solely on physicians could improve ACP across diverse clinical settings.

Investigation of materials for inert electrodes in aluminum electrodeposition cells

Energy Technology Data Exchange (ETDEWEB)

Haggerty, J. S.; Sadoway, D. R.

1987-09-14

Work was divided into major efforts. The first was the growth and characterization of specimens; the second was Hall cell performance testing. Cathode and anode materials were the subject of investigation. Preparation of specimens included growth of single crystals and synthesis of ultra high purity powders. Special attention was paid to ferrites as they were considered to be the most promising anode materials. Ferrite anode corrosion rates were studied and the electrical conductivities of a set of copper-manganese ferrites were measured. Float Zone, Pendant Drop Cryolite Experiments were undertaken because unsatisfactory choices of candidate materials were being made on the basis of a flawed set of selection criteria applied to an incomplete and sometimes inaccurate data base. This experiment was then constructed to determine whether the apparatus used for float zone crystal growth could be adapted to make a variety of important based melts and their interactions with candidate inert anode materials. The third major topic was Non Consumable Anode (Data Base, Candidate Compositions), driven by our perception that the basis for prior selection of candidate materials was inadequate. Results are presented. 162 refs., 39 figs., 18 tabs.

Shocked materials at the intersection of experiment and simulation

Energy Technology Data Exchange (ETDEWEB)

Lorenzana, H. E.; Belak, J. F.; Bradley, K. S.; Bringa, E. M.; Budil, K. S.; Cazamias, J. U.; El-Dasher, B.; Hawreliak, J. A.; Hessler, J.; Kadau, K.; Kalantar, D. H.; McNaney, J. M.; Milathianaki, D.; Rosolankova, K.; Swift, D. C.; Taravillo, M.; Van Buuren, T. W.; Wark, J. S.; de la Rubia, T. Diaz

2008-04-01

Understanding the dynamic lattice response of solids under the extreme conditions of pressure, temperature and strain rate is a scientific quest that spans nearly a century. Critical to developing this understanding is the ability to probe and model the spatial and temporal evolution of the material microstructure and properties at the scale of the relevant physical phenomena-nanometers to micrometers and picoseconds to nanoseconds. While experimental investigations over this range of spatial and temporal scales were unimaginable just a decade ago, new technologies and facilities currently under development and on the horizon have brought these goals within reach for the first time. The equivalent advancements in simulation capabilities now mean that we can conduct simulations and experiments at overlapping temporal and spatial scales. In this article, we describe some of our studies which exploit existing and new generation ultrabright, ultrafast x-ray sources and large scale molecular dynamics simulations to investigate the real-time physical phenomena that control the dynamic response of shocked materials.

Shocked materials at the intersection of experiment and simulation

Energy Technology Data Exchange (ETDEWEB)

Kadau, Kai [Los Alamos National Laboratory

2008-01-01

Understanding the dynamic lattice response of solids under the extreme conditions of pressure, temperature and strain rate is a scientific quest that spans nearly a century. Critical to developing this understanding is the ability to probe and model the spatial and temporal evolution of the material microstructure and properties at the scale of the relevant physical phenomena -- nanometers to micrometers and picoseconds to nanoseconds. While experimental investigations over this range of spatial and temporal scales were unimaginable just a decade ago, new technologies and facilities currently under development and on the horizon have brought these goals within reach for the first time. The equivalent advancements in simulation capabilities now mean that we can conduct simulations and experiments at overlapping temporal and spatial scales. In this article, we describe some of our studies which exploit existing and new generation ultrabright, ultrafast x-ray sources and large scale molecular dynamics simulations to investigate the real-time physical phenomena that control the dynamic response of shocked materials.

PENGEMBANGAN MODUL PEMBELAJARAN KIMIA BERVISI SETS BERORIENTASI CHEMO-ENTREPRENEURSHIP (CEP PADA MATERI LARUTAN ASAM BASA

Directory of Open Access Journals (Sweden)

M. Agus Prayitno

2016-05-01

Full Text Available Kimia merupakan salah satu mata pelajaran yang berkaitan dengan kehidupan sehari- hari, dari segi lingkungan teknologi, maupun masyarakat. Tujuan penelitian ini adalah menghasilkan modul pembelajaran kimia bervisi SETS berorientasi CEP pada materi larutan asam basa yang layak dan efektif digunakan dalam pembelajaran untuk meningkatkan motivasi belajar, minat wirausaha, dan hasil belajar siswa. Penelitian ini merupakan penelitian pengembangan. Uji coba kelayakan produk pada penelitian ini dilaksanakan di MA Mu’allimin Mu’allimat dengan model penelitian one group pre-test and post-test design dan di MAN Rembang dengan model penelitian pre-test and post-test control group design. Data penelitian diperoleh dengan metode validasi, observasi, dokumentasi, tes, dan skala Likert. Hasil validasi ahli materi, ahli media, dan praktisi menunjukkan bahwa modul pembelajaran kimia bervisi SETS berorientasi CEP sangat layak digunakan dalam pembelajaran kimia dengan skor ratarata pada aspek kegrafikan 95,00, aspek penyajian 95,33, aspek kebahasaan 95,00, dan aspek kegrafikan 94,44. Hasil uji coba modul di MA Mu’allimin Mu’allimat menunjukkan peningkatan motivasi 20%, minat wirausaha 25%, dan hasil belajar siswa 79%. Uji coba modul di MAN Rembang peningkatan motivasi belajar siswa, minat wirausaha, dan hasil belajar siswa kelas eksperimen sebesar 27%, 17% dan 66%, sedangkan peningkatan kelas kontrol secara berturutturut 0,4%, 11%, dan 24%.Chemistryis one of the subjects related to everyday life, in terms of environmental technology, and society. The purpose of this research is to produce visionary chemistry learning modules SETS with CEP oriented on acid-base materials which properly and effectively use in learning to improve learning motivation, entrepreneurial interest, and student learning outcomes. This research is development reaserch. Testing the product viability on the research carried out in MA Mu'allimin Mu'allimat with research model are one

The clinical nurse leader in the perioperative setting: a preceptor experience.

Science.gov (United States)

Wesolowski, Michael S; Casey, Gwendolyn L; Berry, Shirley J; Gannon, Jane

2014-07-01

The U.S. Veterans Administration (VA) has implemented the clinical nurse leader (CNL) role nationwide. Nursing leaders at the Malcolm Randall VA Medical Center in Gainesville, Florida, implemented the development of the CNL role in the perioperative setting during the summer of 2012. The perioperative department developed the position in partnership with the University of Florida College of Nursing, Gainesville, Florida. The team developed a description of the roles and experiences of the preceptors, the clinical nurse leader resident, and the University of Florida faculty member. The clinical nurse leader resident's successes and the positive outcomes, such as improved patient outcomes, experienced by the perioperative department demonstrated the importance of the CNL role. Published by Elsevier Inc.

Production of a calcium silicate cement material from alginate impression material.

Science.gov (United States)

Washizawa, Norimasa; Narusawa, Hideaki; Tamaki, Yukimichi; Miyazaki, Takashi

2012-01-01

The purpose of this study was to synthesize biomaterials from daily dental waste. Since alginate impression material contains silica and calcium salts, we aimed to synthesize calcium silicate cement from alginate impression material. Gypsum-based investment material was also investigated as control. X-ray diffraction analyses revealed that although firing the set gypsum-based and modified investment materials at 1,200°C produced calcium silicates, firing the set alginate impression material did not. However, we succeeded when firing the set blend of pre-fired set alginate impression material and gypsum at 1,200°C. SEM observations of the powder revealed that the featured porous structures of diatomite as an alginate impression material component appeared useful for synthesizing calcium silicates. Experimentally fabricated calcium silicate powder was successfully mixed with phosphoric acid solution and set by depositing the brushite. Therefore, we conclude that the production of calcium silicate cement material is possible from waste alginate impression material.

Penerapan Pendekatan Reciprocal Teaching dalam Setting Pembelajaran Kooperatif Materi Sistem Persamaan Linear Tiga Variabel

OpenAIRE

Dewi, Wahyu Tiara

2017-01-01

This research aims to determine the effectiveness of mathematics learning with reciprocal teaching approach in the setting of cooperative learning. The subject matter is system of linear equations of three variables grade X IPS-1 MAN 2 Pontianak. Three aspects of learning effectiveness used are the teacher's ability to manage learning, the student activity learning, and the student learning outcomes. The research method used is descriptive method. The form of research used is pre-experiment w...

Some techniques and results from high-pressure shock-wave experiments utilizing the radiation from shocked transparent materials

International Nuclear Information System (INIS)

McQueen, R.G.; Fritz, J.N.

1981-01-01

It has been known for many years that some transparent materials emit radiation when shocked to high pressures. This property was used to determine the temperature of shocked fused and crystal quartz, which in turn allowed the thermal expansion of SiO 2 at high pressure and also the specific heat to be calculated. Once the radiative energy as a function of pressure is known for one material it is shown how this can be used to determine the temperature of other transparent materials. By the nature of the experiments very accurate shock velocities can be measured and hence high quality equation of state data obtained. Some techniques and results are presented on measuring sound velocities from symmetrical impact of nontransparent materials using radiation emitting transparent analyzers, and on nonsymmetrical impact experiments on transparent materials. Because of special requirements in the later experiments, techniques were developed that lead to very high-precision shock-wave data. Preliminary results, using these techniques are presented for making estimates of the melting region and the yield strength of some metals under strong shock conditions

Cometary Materials Originating from Interstellar Ices: Clues from Laboratory Experiments

Energy Technology Data Exchange (ETDEWEB)

Fresneau, A.; Mrad, N. Abou; LS d’Hendecourt, L.; Duvernay, F.; Chiavassa, T.; Danger, G. [Aix-Marseille Université, PIIM UMR-CNRS 7345, F-13397 Marseille (France); Flandinet, L.; Orthous-Daunay, F.-R.; Vuitton, V.; Thissen, R., E-mail: gregoire.danger@univ-amu.fr [Université Grenoble Alpes, CNRS, IPAG, Grenoble F-38000 (France)

2017-03-10

We use laboratory experiments to derive information on the chemistry occurring during the evolution of astrophysical ices from dense molecular clouds to interplanetary objects. Through a new strategy that consists of coupling very high resolution mass spectrometry and infrared spectroscopy (FT-IR), we investigate the molecular content of the organic residues synthesized from different initial ice compositions. We also obtain information on the evolution of the soluble part of the residues after their over-irradiation. The results give insight into the role of water ice as a trapping and diluting agent during the chemical evolution. They also give information about the importance of the amount of ammonia in such ices, particularly regarding its competition with the carbon chemistry. All of these results allow us to build a first mapping of the evolution of soluble organic matter based on its chemical and physical history. Furthermore, our results suggest that interstellar ices should lead to organic materials enriched in heteroatoms that present similarities with cometary materials but strongly differ from meteoritic organic material, especially in their C/N ratios.

Cometary Materials Originating from Interstellar Ices: Clues from Laboratory Experiments

Science.gov (United States)

Fresneau, A.; Abou Mrad, N.; d'Hendecourt, L. LS; Duvernay, F.; Flandinet, L.; Orthous-Daunay, F.-R.; Vuitton, V.; Thissen, R.; Chiavassa, T.; Danger, G.

2017-03-01

We use laboratory experiments to derive information on the chemistry occurring during the evolution of astrophysical ices from dense molecular clouds to interplanetary objects. Through a new strategy that consists of coupling very high resolution mass spectrometry and infrared spectroscopy (FT-IR), we investigate the molecular content of the organic residues synthesized from different initial ice compositions. We also obtain information on the evolution of the soluble part of the residues after their over-irradiation. The results give insight into the role of water ice as a trapping and diluting agent during the chemical evolution. They also give information about the importance of the amount of ammonia in such ices, particularly regarding its competition with the carbon chemistry. All of these results allow us to build a first mapping of the evolution of soluble organic matter based on its chemical and physical history. Furthermore, our results suggest that interstellar ices should lead to organic materials enriched in heteroatoms that present similarities with cometary materials but strongly differ from meteoritic organic material, especially in their C/N ratios.

Tropospheric Aerosol Radiative Forcing Observational eXperiment - University of Washington instrumented C-131A aircraft Data Set

Data.gov (United States)

National Aeronautics and Space Administration — TARFOX_UWC131A is the Tropospheric Aerosol Radiative Forcing Observational eXperiment (TARFOX) - University of Washington instrumented C-131A aircraft data set. The...

An Optimization Study on Listening Experiments to Improve the Comparability of Annoyance Ratings of Noise Samples from Different Experimental Sample Sets.

Science.gov (United States)

Di, Guoqing; Lu, Kuanguang; Shi, Xiaofan

2018-03-08

Annoyance ratings obtained from listening experiments are widely used in studies on health effect of environmental noise. In listening experiments, participants usually give the annoyance rating of each noise sample according to its relative annoyance degree among all samples in the experimental sample set if there are no reference sound samples, which leads to poor comparability between experimental results obtained from different experimental sample sets. To solve this problem, this study proposed to add several pink noise samples with certain loudness levels into experimental sample sets as reference sound samples. On this basis, the standard curve between logarithmic mean annoyance and loudness level of pink noise was used to calibrate the experimental results and the calibration procedures were described in detail. Furthermore, as a case study, six different types of noise sample sets were selected to conduct listening experiments using this method to examine the applicability of it. Results showed that the differences in the annoyance ratings of each identical noise sample from different experimental sample sets were markedly decreased after calibration. The determination coefficient ( R ²) of linear fitting functions between psychoacoustic annoyance (PA) and mean annoyance (MA) of noise samples from different experimental sample sets increased obviously after calibration. The case study indicated that the method above is applicable to calibrating annoyance ratings obtained from different types of noise sample sets. After calibration, the comparability of annoyance ratings of noise samples from different experimental sample sets can be distinctly improved.

Experience of air transport of nuclear fuel material as type A package

International Nuclear Information System (INIS)

Kawasaki, Masashi; Kageyama, Tomio; Suzuki, Toru

2004-01-01

Special law on nuclear disaster countermeasures (hereafter called as to nuclear disaster countermeasures low) that is domestic law for dealing with measures for nuclear disaster, was enforced in June, 2000. Therefore, nuclear enterprise was obliged to report accidents as required by nuclear disaster countermeasures law, besides meeting the technical requirement of existent transport regulation. For overseas procurement of plutonium reference materials that are needed for material accountability, A Type package must be transported by air. Therefore, concept of air transport of nuclear fuel materials according to the nuclear disaster countermeasures law was discussed, and the manual including measures against accident in air transport was prepared for the oversea procurement. In this presentation, the concept of air transport of A Type package containing nuclear fuel materials according to the nuclear disaster countermeasures law, and the experience of a transportation of plutonium solution from France are shown. (author)

Shape Memory Polymers: A Joint Chemical and Materials Engineering Hands-On Experience

Science.gov (United States)

Seif, Mujan; Beck, Matthew

2018-01-01

Hands-on experiences are excellent tools for increasing retention of first year engineering students. They also encourage interdisciplinary collaboration, a critical skill for modern engineers. In this paper, we describe and evaluate a joint Chemical and Materials Engineering hands-on lab that explores cross-linking and glass transition in…

The RaDIATE High-Energy Proton Materials Irradiation Experiment at the Brookhaven Linac Isotope Producer Facility

Energy Technology Data Exchange (ETDEWEB)

Ammigan, Kavin; et al.

2017-05-01

The RaDIATE collaboration (Radiation Damage In Accelerator Target Environments) was founded in 2012 to bring together the high-energy accelerator target and nuclear materials communities to address the challenging issue of radiation damage effects in beam-intercepting materials. Success of current and future high intensity accelerator target facilities requires a fundamental understanding of these effects including measurement of materials property data. Toward this goal, the RaDIATE collaboration organized and carried out a materials irradiation run at the Brookhaven Linac Isotope Producer facility (BLIP). The experiment utilized a 181 MeV proton beam to irradiate several capsules, each containing many candidate material samples for various accelerator components. Materials included various grades/alloys of beryllium, graphite, silicon, iridium, titanium, TZM, CuCrZr, and aluminum. Attainable peak damage from an 8-week irradiation run ranges from 0.03 DPA (Be) to 7 DPA (Ir). Helium production is expected to range from 5 appm/DPA (Ir) to 3,000 appm/DPA (Be). The motivation, experimental parameters, as well as the post-irradiation examination plans of this experiment are described.

Experiences With and Perceptions of Workplace Bullying Among Athletic Trainers in the Secondary School Setting.

Science.gov (United States)

Pitney, William A; Weuve, Celest; Mazerolle, Stephanie M

2016-09-01

Workplace bullying (WPB) has recently received much attention in society. Research on WPB in athletic training practice settings is limited. To determine the prevalence of WPB in the secondary school setting and explore the factors related to it. Mixed-methods study. Secondary school. A total of 567 athletic trainers (women = 322 [56.8%], men = 245 [43.2%]), aged 36.5 ± 11.1 years with 11.9 ± 9.5 years of experience took part in phase I. Ten participants (7 women and 3 men), aged 39.3 ± 10.1 years with 14.3 ± 8.3 years of experience, took part in phase II. For the online survey, we used the previously validated and reliable (Cronbach α = .84) Athletic Training Workplace Environment Survey, which included the Negative Acts Questionnaire-Revised. The prevalence of WPB was measured with descriptive statistics, and χ 2 analyses were used to compare differences between groups (ie, females and males, perpetrators' titles). The interview data were examined using an inductive content analysis. Of the participants, 44 (7.8%) were empirically identified as targets of bullying, though a higher percentage (12.4%, n = 70) self-identified as bullying targets. Men and women did not differ with respect to having experienced WPB, but more perpetrators were male (71.6%, n = 48) than female (28.4%, n = 19; χ 2 1 = 12.55, P = discrimination were antecedents of bullying. Stress, depression, and sleep disturbances were reported consequences. Participants coped with bullying by avoidance and role refocusing. Bullying was experienced by a small percentage of athletic trainers in the secondary school setting, a contrast to the findings in the collegiate practice setting.

49 CFR 173.194 - Gas identification sets.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Gas identification sets. 173.194 Section 173.194... Gas identification sets. Gas identification sets containing poisonous material must be packaged in... silical gel, gas identification sets may be shipped as follows: (1) If the poisonous material does not...

Organic materials: sources of nitrogen in the organic production of lettuce

OpenAIRE

MANOJLOVIC, Maja; CABILOVSKI, Ranko; BAVEC, Martina

2010-01-01

This paper presents the results of 2 experiments: an incubation experiment and a subsequent field experiment. An incubation experiment was set up in order to determine the mineralization potential of different organic materials (OMs) (well-rotted farmyard manure [FTM], guano [G], soybean seed [S], and forage pea seed [P]), the kinetics of mineral nitrogen (N) release, and the correlation between OM content and the quantity of mineralized N. The results of the incubation experiment were checke...

Physical protection of nuclear materials: Experience in regulation, implementation and operations. Proceedings of a conference

International Nuclear Information System (INIS)

1998-01-01

The conference was held at IAEA Headquarters in Vienna from 10 to 14 November 1997. It was attended by 162 registered participants from 42 countries and eight international organizations. The 58 papers presented dealt with the experience of regulators, designers and facility operators, including response forces, in meeting the demands and requirements in this changing area of physical protection of nuclear materials and facilities. Individual abstracts were prepared for each of the papers. Topics covered include contemporary and emerging issues, experience in regulation, implementation at facilities, program assessment and cooperation, hardware and software, illicit trafficking in nuclear materials, and transportation

Analysis of an out-of-pile experiment for materials redistribution under core disruptive accident condition of fast breeder reactors

International Nuclear Information System (INIS)

Sawada, Tetsuo; Ninokata, Hisashi; Shimizu, Akinao

1995-01-01

Calculation of one of the SIMBATH experiments was performed using the SIMMER-II code. The experiments were intended to simulate the fuel pin disintegration, the molten materials relocation and following materials redistribution that could occur during core disruptive accidents assumed in fast breeder reactors. The calculation by SIMMER-II showed that the incorporated step-wise fuel pin disintegration model and the modified particle jamming model were capable of reproducing the course of materials relocation within the identified ranges of the parameters which governed the blockages formation, i.e. the characteristic radius of solid particles jamming and/or sieving out in the flow and the effective particle viscosity. In particular the final materials redistribution calculated by SIMMER-II very well reproduced the experiment. This fact made it possible to interpret theoretically the mechanisms of flow blockages formation and related materials redistribution. (author)

Effects of molten material temperatures and coolant temperatures on vapor explosion

Institute of Scientific and Technical Information of China (English)

LI Tianshu; YANG Yanhua; YUAN Minghao; HU Zhihua

2007-01-01

An observable experiment facility for low-temperature molten materials to be dropped into water was set up in this study to investigate the mechanism of the vapor explosion. The effect of the fuel and coolant interaction(FCI) on the vapor explosion during the severe accidents of a fission nuclear reactor has been studied. The experiment results showed that the molten material temperature has an important effect on the vapor explosion behavior and pressure. The increase of the coolant temperature would decrease the pressure of the vapor explosion.

Finding Environmental Knowledge in SCUBA-Based Textual Materials

Science.gov (United States)

Gündogdu, Cemal; Aygün, Yalin; Ilkim, Mehmet

2018-01-01

As marine environments within the adventure domain are future key-settings for recreational SCUBA diving experience, SCUBA-based textual materials should provide insight into environmental knowledge that is well connected to the novice divers' behaviour and attitude. This research is concerned with a major recreational SCUBA diver manual for…

Material Control and Accountability Experience at the Fuel Conditioning Facility

International Nuclear Information System (INIS)

Vaden, D.; Fredrickson, G.L.

2007-01-01

placed on a balance, others methods (e.g., level measurements, volume calibration equations, calculated density via additive volumes) are utilized to measure the inventory mass. This paper will discuss the material control and accountability experience at the FCF after ten-plus years of processing spent nuclear fuel. A particular area of discussion is the calculated electrolyte density via additive volumes and its importance in determining the mass and composition in the FCF electro-refiners for material control and accountability of special nuclear material. (authors)

Project for a beam line consecrated to soft condensed matter, common heterogeneous materials and non-crystalline materials on soleil

International Nuclear Information System (INIS)

Ne, F.; Zemb, T.

1998-01-01

This project is a part of the 'SOLEIL' synchrotron project. The camera proposed is optimized for small angle x-ray scattering in the domain of soft condensed matter, common heterogeneous materials such as wood, cements, glass, and more generally non-crystalline materials. The beam line is designed to allow a quick succession of different users without time consuming adjustments. Therefore, optical settings are minimized, taking into account the pluri-disciplinary nature of the analysis possibilities. To this end, the technical requirements are as follows. First and essentially, the wave-length has to be fixed and set around 12 keV. Focusing mirrors, optics to sample and sample to detector distances, and the size of the detector allow for a wide range of wave vector to be used. Rejection rate will be lower, and angular dynamical range will be larger than any of the current synchrotron lines. We want this line to be, and to stay, complementary to more specific systems, such as reflectivity experiments or grazing angle scattering experiments. However, we are thinking of an adaptation to ultra small angle scattering mode, based on the Bonse and Hart camera. Such equipment, actually a kind of 'Instamatic' of the reciprocal space, will fulfill to the need of chemical engineers, biophysicists or material scientists interested in hard as well as soft condensed matter. It will allow a large amount of experiments per time unit. (author)

Clearance of materials, some experience from the UK - Clearing a recent building, a chance to get as much material out as indistinguishable from background. A rare opportunity

International Nuclear Information System (INIS)

Burgess, Peter; Fisher, Alan

2014-01-01

This poster will illustrate the methods used in the UK to clear materials from a relatively modern building with good history. Some materials were cleared as clean, i.e. there was no reasonable chance of contamination given where they were and how they had been used. Other materials were cleared as Out of Scope, i.e. they complied with the relevant UK legislation to be considered in law as non-radioactive. The first group was subjected to limited confirmation measurements whereas the latter were carefully monitored. The aim was to set up, for each object, a monitoring method which took account of the fingerprint, the material mass per unit area and its influence on background. The capacity of the monitoring method was described in terms of Maximum Missable Activity and the aim was to set up methods which gave MMAs which gave confident sentencing but limited the time taken. The project was very successful. (authors)

Augmented Reality Learning Experiences: Survey of Prototype Design and Evaluation

Science.gov (United States)

Santos, Marc Ericson C.; Chen, Angie; Taketomi, Takafumi; Yamamoto, Goshiro; Miyazaki, Jun; Kato, Hirokazu

2014-01-01

Augmented reality (AR) technology is mature for creating learning experiences for K-12 (pre-school, grade school, and high school) educational settings. We reviewed the applications intended to complement traditional curriculum materials for K-12. We found 87 research articles on augmented reality learning experiences (ARLEs) in the IEEE Xplore…

Physics-Based Simulation and Experiment on Blast Protection of Infill Walls and Sandwich Composites Using New Generation of Nano Particle Reinforced Materials

Science.gov (United States)

Irshidat, Mohammad

A critical issue for the development of nanotechnology is our ability to understand, model, and simulate the behavior of small structures and to make the connection between nano structure properties and their macroscopic functions. Material modeling and simulation helps to understand the process, to set the objectives that could guide laboratory efforts, and to control material structures, properties, and processes at physical implementation. These capabilities are vital to engineering design at the component and systems level. In this research, experimental-computational-analytical program was employed to investigate the performance of the new generation of polymeric nano-composite materials, like nano-particle reinforced elastomeric materials (NPREM), for the protection of masonry structures against blast loads. New design tools for using these kinds of materials to protect Infill Walls (e.g. masonry walls) against blast loading were established. These tools were also extended to cover other type of panels like sandwich composites. This investigation revealed that polymeric nano composite materials are strain rate sensitive and have large amount of voids distributed randomly inside the materials. Results from blast experiments showed increase in ultimate flexural resistance achieved by both unreinforced and nano reinforced polyurea retrofit systems applied to infill masonry walls. It was also observed that a thin elastomeric coating on the interior face of the walls could be effective at minimizing the fragmentation resulting from blast. More conclusions are provided with recommended future research.

Structure and experience of the state system of accounting for and control of nuclear material (SSAC) in the German Democratic Republic

International Nuclear Information System (INIS)

Rehak, W.

1989-01-01

The legislative basis, structure, functions, records and experience of the State System of Accounting for and Control of Nuclear Materials (SSAC) in the German Democratic Republic (GDR) are reviewed. The GDR's nuclear activities are characterized by research establishments and power reactors and by the absence of industrial bulk handling facilities such as fuel fabrication, reprocessing and enrichment plants. As a consequence both the national and the international safeguards approach can be based on the principles of item accountability which does not require the establishment of an elaborate measurement system. Right from the beginning the safeguards implemented were of the NPT type as the GDR was among the early parties to the Non-Proliferation Treaty. The national rules and procedures of safeguards were thus established in harmony with the international requirements and have closely followed their development. The SSAC in the GDR is part of the comprehensive set-up of protective measures against the potential hazards in the use of nuclear energy under the National Board for Atomic Safety and Radiation Protection which has established a number of inspectorates, among them the inspection group for nuclear material control -the Nuclear Material Inspectorate. 5 figs., 2 tabs

Experiences of nurses working in a rural primary health-care setting in Mopani district, Limpopo Province

Directory of Open Access Journals (Sweden)

MP Mohale

2008-09-01

Full Text Available Professional nurses working in rural, primary health-care settings are experiencing burnout due to serious shortages of personnel. This is exacerbated by the brain drain of nurses leaving the country. Rural settings are resource constrained in terms of personnel and equipment. This results in dissatisfaction among nurses due to the unbearable working conditions which result in stress and frustration. A qualitative, explorative, descriptive study was conducted to explore and describe the experiences of nurses working in a rural primary health-care setting in the greater Letaba sub district in Limpopo Province. Purposive sampling was used to identify the participants. Data was collected in the form of in-depth interviews. The study revealed that nurses working in primary health-care settings were experiencing emotional and physical strain as a result of the shortage of human resources. It was recommended that policies that meet the health-care needs of rural communities be developed, and that strategies to retain professional nurses in primary health-care settings be formulated.

Materials research for passive solar systems: Solid-state phase-change materials

Science.gov (United States)

Benson, D. K.; Webb, J. D.; Burrows, R. W.; McFadden, J. D. O.; Christensen, C.

1985-03-01

A set of solid-state phase-change materials is being evaluated for possible use in passive solar thermal energy storage systems. The most promising materials are organic solid solutions of pentaerythritol (C5H12O4), pentaglycerinve (C5H12O3), and neopentyl glycol (C5H12O2). Solid solution mixtures of these compounds can be tailored so that they exhibit solid-to-solid phase transformations at any desired temperature between 25 C and 188 C, and have latent heats of transformation etween 20 and 70 cal/g. Transformation temperatures, specific heats, and latent heats of transformation have been measured for a number of these materials. Limited cyclic experiments suggest that the solid solutions are stable. These phase-change materials exhibit large amounts of undercooling; however, the addition of certain nucleating agents as particulate dispersions in the solid phase-change material greatly reduces this effect. Computer simulations suggest that the use of an optimized solid-state phase-change material in a Trombe wall could provide better performance than a concrete Trombe wall four times thicker and nine times heavier.

Irradiation capability of Japanese materials test reactor for water chemistry experiments

International Nuclear Information System (INIS)

Hanawa, Satoshi; Hata, Kuniki; Chimi, Yasuhiro; Nishiyama, Yutaka; Nakamura, Takehiko

2012-09-01

Appropriate understanding of water chemistry in the core of LWRs is essential as chemical species generated due to water radiolysis by neutron and gamma-ray irradiation govern corrosive environment of structural materials in the core and its periphery, causing material degradation such as stress corrosion cracking. Theoretical model calculation such as water radiolysis calculation gives comprehensive understanding of water chemistry at irradiation field where we cannot directly monitor. For enhancement of the technology, accuracy verification of theoretical models under wide range of irradiation conditions, i.e. dose rate, temperature etc., with well quantified in-pile measurement data is essential. Japan Atomic Energy Agency (JAEA) has decided to launch water chemistry experiments for obtaining data that applicable to model verification as well as model benchmarking, by using an in-pile loop which will be installed in the Japan Materials Testing Reactor (JMTR). In order to clarify the irradiation capability of the JMTR for water chemistry experiments, preliminary investigations by water radiolysis / ECP model calculations were performed. One of the important irradiation conditions for the experiments, i.e. dose rate by neutron and gamma-ray, can be controlled by selecting irradiation position in the core. In this preliminary study, several representative irradiation positions that cover from highest to low absorption dose rate were chosen and absorption dose rate at the irradiation positions were evaluated by MCNP calculations. As a result of the calculations, it became clear that the JMTR could provide the irradiation conditions close to the BWR. The calculated absorption dose rate at each irradiation position was provided to water radiolysis calculations. The radiolysis calculations were performed under various conditions by changing absorption dose rate, water chemistry of feeding water etc. parametrically. Qualitatively, the concentration of H 2 O 2 , O 2 and

Midwives' experiences of labour care in midwifery units. A qualitative interview study in a Norwegian setting.

Science.gov (United States)

Skogheim, Gry; Hanssen, Tove A

2015-12-01

In some economically developed countries, women's choice of birth care and birth place is encouraged. The aim of this study was to explore and describe the experiences of midwives who started working in alongside/free-standing midwifery units (AMU/FMU) and their experiences with labour care in this setting. A qualitative explorative design using a phenomenographic approach was used. Semi-structured interviews were conducted with ten strategically sampled midwives working in midwifery units. The analysis revealed the following five categories of experiences noted by the midwives: mixed emotions and de-learning obstetric unit habits, revitalising midwifery philosophy, alertness and preparedness, presence and patience, and coping with time. Starting to work in an AMU/FMU can be a distressing period for a midwife. First, it may require de-learning the medical approach to birth, and, second, it may entail a revitalisation (and re-learning) of birth care that promotes physiological birth. Midwifery, particularly in FMUs, requires an especially careful assessment of the labouring process, the ability to be foresighted, and capability in emergencies. The autonomy of midwives may be constrained also in AMUs/FMUs. However, working in these settings is also viewed as experiencing "the art of midwifery" and enables revitalisation of the midwifery philosophy. Copyright © 2015 Elsevier B.V. All rights reserved.

Pulsed power accelerator for material physics experiments

Directory of Open Access Journals (Sweden)

D. B. Reisman

2015-09-01

Full Text Available We have developed the design of Thor: a pulsed power accelerator that delivers a precisely shaped current pulse with a peak value as high as 7 MA to a strip-line load. The peak magnetic pressure achieved within a 1-cm-wide load is as high as 100 GPa. Thor is powered by as many as 288 decoupled and transit-time isolated bricks. Each brick consists of a single switch and two capacitors connected electrically in series. The bricks can be individually triggered to achieve a high degree of current pulse tailoring. Because the accelerator is impedance matched throughout, capacitor energy is delivered to the strip-line load with an efficiency as high as 50%. We used an iterative finite element method (FEM, circuit, and magnetohydrodynamic simulations to develop an optimized accelerator design. When powered by 96 bricks, Thor delivers as much as 4.1 MA to a load, and achieves peak magnetic pressures as high as 65 GPa. When powered by 288 bricks, Thor delivers as much as 6.9 MA to a load, and achieves magnetic pressures as high as 170 GPa. We have developed an algebraic calculational procedure that uses the single brick basis function to determine the brick-triggering sequence necessary to generate a highly tailored current pulse time history for shockless loading of samples. Thor will drive a wide variety of magnetically driven shockless ramp compression, shockless flyer plate, shock-ramp, equation of state, material strength, phase transition, and other advanced material physics experiments.

Control of helium effects in irradiated materials based on theory and experiment

International Nuclear Information System (INIS)

Mansur, L.K.; Lee, E.H.; Maziasz, P.J.; Rowcliffe, A.F.

1986-01-01

Helium produced in materials by (n,α) transmutation reactions during neutron irradiations or subjected in ion bombardment experiments causes substantial changes in the response to displacement damage. In particular, swelling, phase transformations and embrittlement are strongly affected. Present understanding of the mechanisms underlying these effects is reviewed. Key theoretical relationships describing helium effects on swelling and helium diffusion are described. Experimental data in the areas of helium effects on swelling and precipitation is reviewed with emphasis on critical experiments that have been designed and evaluated in conjunction with theory. Confirmed principles for alloy design to control irradiation performance are described

Experiences of Nigerian Internationally Educated Nurses Transitioning to United States Health Care Settings.

Science.gov (United States)

Iheduru-Anderson, Kechinyere C; Wahi, Monika M

2018-04-01

Successful transition to practice of internationally educated nurses (IENs) can critically affect quality of care. The aim of this study was to characterize the facilitators and barriers to transition of Nigerian IENs (NIENs) to the United States health care setting. Using a descriptive phenomenology approach, 6 NIENs were interviewed about their transitional experiences in the United States. Thematic methods were used for data analysis. The three major themes identified from the participants' stories were "fear/anger and disappointment" (FAD), "road/journey to success/overcoming challenges" (RJO), and "moving forward" (MF). The FAD theme predominated, including experiences of racism, bullying, and inequality. The RJO theme included resilience, and the MF theme encompassed personal growth. NIENs face personal and organizational barriers to adaptation, especially fear, anger and disappointment. Future research should seek to develop a model for optimal adaptation that focuses on improving both personal and organizational facilitators and decreasing barriers.

Radon and material radiopurity assessment for the NEXT double beta decay experiment

Energy Technology Data Exchange (ETDEWEB)

Cebrián, S.; Dafni, T.; González-Díaz, D.; Herrera, D. C.; Irastorza, I. G.; Luzón, G.; Ortiz de Solórzano, A.; Villar, J. A. [Laboratorio de Física Nuclear y Astropartículas, Universidad de Zaragoza, C/ Pedro Cerbuna 12, 50009 Zaragoza (Spain); Laboratorio Subterráneo de Canfranc, Paseo de los Ayerbe s/n, 22880 Canfranc Estación, Huesca (Spain); Pérez, J. [Instituto de Física Teórica, UAM/CSIC, Campus de Cantoblanco, 28049 Madrid (Spain); Bandac, I. [Laboratorio Subterráneo de Canfranc, Paseo de los Ayerbe s/n, 22880 Canfranc Estación, Huesca (Spain); Labarga, L. [Dpto. de Física Teórica, Universidad Autónoma de Madrid, Campus de Cantoblanco, 28049 Madrid (Spain); Álvarez, V.; Cárcel, S.; Cervera, A.; Díaz, J.; Ferrario, P.; Gómez-Cadenas, J. J.; Laing, A.; Liubarsky, I.; López-March, N. [Instituto de Física Corpuscular, CSIC & Universitat de València, C/ Catedrático José Beltrán, 2, 46980 Paterna, Valencia (Spain); and others

2015-08-17

The ”Neutrino Experiment with a Xenon TPC” (NEXT), intended to investigate the neutrinoless double beta decay using a high-pressure xenon gas TPC filled with Xe enriched in {sup 136}Xe at the Canfranc Underground Laboratory in Spain, requires ultra-low background conditions demanding an exhaustive control of material radiopurity and environmental radon levels. An extensive material screening process is underway for several years based mainly on gamma-ray spectroscopy using ultra-low background germanium detectors in Canfranc but also on mass spectrometry techniques like GDMS and ICPMS. Components from shielding, pressure vessel, electroluminescence and high voltage elements and energy and tracking readout planes have been analyzed, helping in the final design of the experiment and in the construction of the background model. The latest measurements carried out will be presented and the implication on NEXT of their results will be discussed. The commissioning of the NEW detector, as a first step towards NEXT, has started in Canfranc; in-situ measurements of airborne radon levels were taken there to optimize the system for radon mitigation and will be shown too.

Descriptive set theory

CERN Document Server

Moschovakis, YN

1987-01-01

Now available in paperback, this monograph is a self-contained exposition of the main results and methods of descriptive set theory. It develops all the necessary background material from logic and recursion theory, and treats both classical descriptive set theory and the effective theory developed by logicians.

Electromagnetic analysis of the Korean helium cooled ceramic reflector test blanket module set

International Nuclear Information System (INIS)

Lee, Youngmin; Ku, Duck Young; Lee, Dong Won; Ahn, Mu-Young; Park, Yi-Hyun; Cho, Seungyon

2016-01-01

Korean helium cooled ceramic reflector (HCCR) test blanket module set (TBM-set) will be installed at equatorial port #18 of Vacuum Vessel in ITER in order to test the breeding blanket performance for forthcoming fusion power plant. Since ITER tokamak has a set of electromagnetic coils (Central Solenoid, Poloidal Field and Toroidal Field coil set) around Vacuum Vessel, the HCCR TBM-set, the TBM and associated shield, is greatly influenced by magnetic field generated by these coils. In the case of fast transient electromagnetic events such as major disruption, vertical displacement event or magnet fast discharge, magnetic field and induced eddy current results in huge electromagnetic load, known as Lorentz load, on the HCCR TBM-set. In addition, the TBM-set experiences electromagnetic load due to magnetization of the structural material not only during the fast transient events but also during normal operation since the HCCR TBM adopts Reduced Activation Ferritic Martensitic (RAFM) steel as a structural material. This is known as Maxwell load which includes Lorentz load as well as load due to magnetization of structure material. This paper presents electromagnetic analysis results for the HCCR TBM-set. For analysis, a 20° sector finite model was constructed considering ITER configuration such as Vacuum Vessel, ITER shield blankets, Central Solenoid, Poloidal Field, Toroidal Field coil set as well as the HCCR TBM-set. Three major disruptions (operational event, likely event and highly unlikely event) were selected for analysis based on the load specifications. ANSYS-EMAG was used as a calculation tool. The results of EM analysis will be used as input data for the structural analysis.

Electromagnetic analysis of the Korean helium cooled ceramic reflector test blanket module set

Energy Technology Data Exchange (ETDEWEB)

Lee, Youngmin, E-mail: ymlee@nfri.re.kr [National Fusion Research Institute, Daejeon (Korea, Republic of); Ku, Duck Young [National Fusion Research Institute, Daejeon (Korea, Republic of); Lee, Dong Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Ahn, Mu-Young; Park, Yi-Hyun; Cho, Seungyon [National Fusion Research Institute, Daejeon (Korea, Republic of)

2016-11-01

Korean helium cooled ceramic reflector (HCCR) test blanket module set (TBM-set) will be installed at equatorial port #18 of Vacuum Vessel in ITER in order to test the breeding blanket performance for forthcoming fusion power plant. Since ITER tokamak has a set of electromagnetic coils (Central Solenoid, Poloidal Field and Toroidal Field coil set) around Vacuum Vessel, the HCCR TBM-set, the TBM and associated shield, is greatly influenced by magnetic field generated by these coils. In the case of fast transient electromagnetic events such as major disruption, vertical displacement event or magnet fast discharge, magnetic field and induced eddy current results in huge electromagnetic load, known as Lorentz load, on the HCCR TBM-set. In addition, the TBM-set experiences electromagnetic load due to magnetization of the structural material not only during the fast transient events but also during normal operation since the HCCR TBM adopts Reduced Activation Ferritic Martensitic (RAFM) steel as a structural material. This is known as Maxwell load which includes Lorentz load as well as load due to magnetization of structure material. This paper presents electromagnetic analysis results for the HCCR TBM-set. For analysis, a 20° sector finite model was constructed considering ITER configuration such as Vacuum Vessel, ITER shield blankets, Central Solenoid, Poloidal Field, Toroidal Field coil set as well as the HCCR TBM-set. Three major disruptions (operational event, likely event and highly unlikely event) were selected for analysis based on the load specifications. ANSYS-EMAG was used as a calculation tool. The results of EM analysis will be used as input data for the structural analysis.

Seeking to understand lived experiences of personal recovery in personality disorder in community and forensic settings - a qualitative methods investigation.

Science.gov (United States)

Shepherd, Andrew; Sanders, Caroline; Shaw, Jenny

2017-08-01

Understandings of personal recovery have emerged as an alternative framework to traditional ideas of clinical progression, or symptom remission, in clinical practice. Most research in this field has focussed on the experience of individuals suffering with psychotic disorders and little research has been conducted to explore the experience of individuals with a personality disorder diagnosis, despite the high prevalence of such difficulties. The nature of the personality disorder diagnosis, together with high prevalence rates in forensic settings, renders the understanding of recovery in these contexts particularly problematic. The current study seeks to map out pertinent themes relating to the recovery process in personality disorder as described by individuals accessing care in either community or forensic settings. Individual qualitative interviews were utilised to explore the lived experience of those receiving a personality disorder diagnosis and accessing mental health care in either community or forensic settings. A thematic analysis was conducted to identify shared concepts and understanding between participants. Fourty-one individual participant interviews were conducted across forensic and community settings. Recovery was presented by participants as a developing negotiated understanding of the self, together with looked for change and hope in the future. Four specific themes emerged in relation to this process: 1. Understanding early lived experience as informing sense of self 2. Developing emotional control 3. Diagnosis as linking understanding and hope for change 4. The role of mental health services. Through considering personal recovery in personality disorder as a negotiated understanding between the individual, their social networks and professionals this study illustrates the complexity of working through such a process. Clarity of understanding in this area is essential to avoid developing resistance in the recovery process. Understanding of

Simulated Irradiation of Samples in HFIR for use as Possible Test Materials in the MPEX (Material Plasma Exposure Experiment) Facility

Energy Technology Data Exchange (ETDEWEB)

Ellis, Ronald James [ORNL; Rapp, Juergen [ORNL

2014-01-01

The importance of Plasma Material Interaction (PMI) is a major concern in fusion reactor design and analysis. The Material-Plasma Exposure eXperiment (MPEX) facility will explore PMI under fusion reactor plasma conditions. Samples with accumulated displacements per atom (DPA) damage produced by irradiations in the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL) will be studied in the MPEX facility. The project presented in this paper involved performing assessments of the induced radioactivity and resulting radiation fields of a variety of potential fusion reactor materials. The scientific code packages MCNP and SCALE were used to simulate irradiation of the samples in HFIR; generation and depletion of nuclides in the material and the subsequent composition, activity levels, gamma radiation fields, and resultant dose rates as a function of cooling time. These state-of-the-art simulation methods were used in addressing the challenge of the MPEX project to minimize the radioactive inventory in the preparation of the samples for inclusion in the MPEX facility.

Setting up experimental incineration system for low-level radioactive samples and combustion experiments

International Nuclear Information System (INIS)

Yumoto, Yasuhiro; Hanafusa, Tadashi; Nagamatsu, Tomohiro; Okada, Shigeru

1997-01-01

An incineration system was constructed which were composed of a combustion furnace (AP-150R), a cyclone dust collector, radioisotope trapping and measurement apparatus and a radioisotope storage room built in the first basement of the Radioisotope Center. Low level radioactive samples (LLRS) used for the combustion experiment were composed of combustible material or semi-combustible material containing 500 kBq of 99m TcO 4 or 23.25 kBq of 131 INa. The distribution of radioisotopes both in the inside and outside of combustion furnace were estimated. We measured radioactivity of a smoke duct gas in terminal exit of the exhaust port. In case of combustion of LLRS containing 99m TcO 4 or 131 INa, concentration of radioisotopes at the exhaust port showed less than legal concentration limit of these radioisotopes. In cases of combustion of LLRS containing 99m TcO 4 or 131 INa, decontamination factors of the incineration system were 120 and 1.1, respectively. (author)

Accelerated Aging Experiments for Prognostics of Damage Growth in Composite Materials

Science.gov (United States)

2011-09-01

builds on current understanding of fault modes in composites. This paper investigates faults in laminated ply composites. Such structures mainly...experiments where intermittent ground truth and in-situ characteristics are collected. Growth patterns are analyzed for damage types typical of laminated ...2: [0/902/45/-45/90], and Layup 3: [902/45/-45]2. Torayca T700G uni-directional carbon- prepreg material was used for 15.24 cm x 25.4 cm coupons with

Machine-learning-assisted materials discovery using failed experiments

Science.gov (United States)

Raccuglia, Paul; Elbert, Katherine C.; Adler, Philip D. F.; Falk, Casey; Wenny, Malia B.; Mollo, Aurelio; Zeller, Matthias; Friedler, Sorelle A.; Schrier, Joshua; Norquist, Alexander J.

2016-05-01

Inorganic-organic hybrid materials such as organically templated metal oxides, metal-organic frameworks (MOFs) and organohalide perovskites have been studied for decades, and hydrothermal and (non-aqueous) solvothermal syntheses have produced thousands of new materials that collectively contain nearly all the metals in the periodic table. Nevertheless, the formation of these compounds is not fully understood, and development of new compounds relies primarily on exploratory syntheses. Simulation- and data-driven approaches (promoted by efforts such as the Materials Genome Initiative) provide an alternative to experimental trial-and-error. Three major strategies are: simulation-based predictions of physical properties (for example, charge mobility, photovoltaic properties, gas adsorption capacity or lithium-ion intercalation) to identify promising target candidates for synthetic efforts; determination of the structure-property relationship from large bodies of experimental data, enabled by integration with high-throughput synthesis and measurement tools; and clustering on the basis of similar crystallographic structure (for example, zeolite structure classification or gas adsorption properties). Here we demonstrate an alternative approach that uses machine-learning algorithms trained on reaction data to predict reaction outcomes for the crystallization of templated vanadium selenites. We used information on ‘dark’ reactions—failed or unsuccessful hydrothermal syntheses—collected from archived laboratory notebooks from our laboratory, and added physicochemical property descriptions to the raw notebook information using cheminformatics techniques. We used the resulting data to train a machine-learning model to predict reaction success. When carrying out hydrothermal synthesis experiments using previously untested, commercially available organic building blocks, our machine-learning model outperformed traditional human strategies, and successfully predicted

Corrosion evaluation of materials from the second deployment of the Gulf of Mexico Experiment

Energy Technology Data Exchange (ETDEWEB)

Zeman, G.J.

1979-10-01

The corrosion behavior and nature of films formed on 5052 aluminum, CA706 copper-nickel alloy, AL-6X stainless alloy, and grade 2 titanium in seawater during the second deployment of the Gulf of Mexico Experiment (GOME II) were evaluated by optical and scanning-electron microscopy as well as gravimetric measurements. The thickness of the corrosion-product and biofouling film on the copper-nickel alloy increased linearly with time over the 99-day duration of the experiment, whereas the film thickness on aluminum was independent of exposure time. The uniform corrosion of aluminum and the copper-nickel alloy, based upon defilmed metal loss from preweighed ring specimens, was approx. 0.3 and 0.7 mils, respectively, for the 55-day exposure period. The thin films formed on stainless alloy and titanium were composed primarily of organic residues. The corrosion resistance of titanium and stainless alloy was excellent under the conditions in this experiment, although some evidence for pitting attack was found for the latter material. This study is directed toward the evaluation of candidate materials for OTEC heat exchangers.

ICP MS selection of radiopure materials for the GERDA experiment

Science.gov (United States)

di Vacri, M. L.; Nisi, S.; Cattadori, C.; Janicsko, J.; Lubashevskiy, A.; Smolnikov, A.; Walter, M.

2015-08-01

The GERDA (GERmanium Detector Array) experiment, located in the Gran Sasso Underground Laboratory (LNGS, Italy) aims to search for neutrinoless double beta (0νββ) decay of the 76Ge isotope. Both an ultra-low radioactivity background environment and active techniques to abate the residual background are required to reach the background index (of 10-3 counts/keV kg y) at the Qββ. In order to veto and suppress those events that partially deposit energy in Ge detectors, the readout of liquid argon (LAr) scintillation light (SL) has been implemented for the second GERDA experimental Phase. A double veto system has been designed and constructed using highly radiopure materials (scintillating fibers, wavelength shifters, polymeric foils, reflective foils). This work describes the study of lead, thorium and uranium ultra-trace content, performed at the LNGS Chemistry Laboratory by High Resolution Mass Spectrometry (HR ICP MS), for the selection of all materials involved in the construction of the veto system

ICP MS selection of radiopure materials for the GERDA experiment

Energy Technology Data Exchange (ETDEWEB)

Di Vacri, M. L., E-mail: divacrim@lngs.infn.it [INFN, Laboratori Nazionali del Gran Sasso, via G.Acitelli 22, 67100 Assergi (Italy); Dipartimento di Scienze Fisiche e Chimiche, University of L’Aquila, via Vetoio, 67100 L’Aquila (Italy); Nisi, S., E-mail: nisi@lngs.infn.it [INFN, Laboratori Nazionali del Gran Sasso, via G.Acitelli 22, 67100 Assergi (AQ) (Italy); Cattadori, C., E-mail: cattadori@lngs.infn.it [INFN Sezione di Milano Bicocca, Milano (Italy); Janicsko, J. [TUM Munich (Germany); Lubashevskiy, A. [MPIK, Heidelberg (Germany); JINR, Dubna (Russian Federation); Smolnikov, A. [MPIK, Heidelberg (Germany); Walter, M. [Physik-Institut, Universitat Zurich, 8057 Zurich (Switzerland)

2015-08-17

The GERDA (GERmanium Detector Array) experiment, located in the Gran Sasso Underground Laboratory (LNGS, Italy) aims to search for neutrinoless double beta (0νββ) decay of the {sup 76}Ge isotope. Both an ultra-low radioactivity background environment and active techniques to abate the residual background are required to reach the background index (of 10{sup −3} counts/keV kg y) at the Q{sub ββ}. In order to veto and suppress those events that partially deposit energy in Ge detectors, the readout of liquid argon (LAr) scintillation light (SL) has been implemented for the second GERDA experimental Phase. A double veto system has been designed and constructed using highly radiopure materials (scintillating fibers, wavelength shifters, polymeric foils, reflective foils). This work describes the study of lead, thorium and uranium ultra-trace content, performed at the LNGS Chemistry Laboratory by High Resolution Mass Spectrometry (HR ICP MS), for the selection of all materials involved in the construction of the veto system.

New Materials = New Expressive Powers: Smart Material Interfaces and Arts, experience via smart materials

NARCIS (Netherlands)

Minuto, A.; Pittarello, Fabio; Nijholt, Antinus

2014-01-01

It is not easy for a growing artist to find his poetry. Smart materials could be an answer for those who are looking for new forms of art. Smart Material Interfaces (SMI) define a new interaction paradigm based on dynamic modications of the innovative materials' properties. SMI can be applied in

Material science experience gained from the space nuclear rocket program: Insulators

International Nuclear Information System (INIS)

Wagner, P.

1992-07-01

Although Rover reactors are viewed as the ultimate in high-temperature operating systems, many of the materials used in these reactors (for example, support rods, control drums, and the reflector) have to be held at relatively low temperatures while the reactor operates, in order to maintain their structural integrity. Thus the insulators needed to separate these temperature domains are crucial to the reactor's ultimate operating times and temperatures. All of the reactors that were tested used pyrolytic graphite as the primary insulator. However, it had been long planned to replace the graphite with zirconium carbide and a lengthy and intensive effort to develop the zirconium carbide insulators had been made at the time Rover was terminated. This report details research and development and the experience we gained with both these insulator materials

Permeable barrier materials for strontium immobilization: Unsaturated flow apparatus determination of hydraulic conductivity -- Column sorption experiments

International Nuclear Information System (INIS)

Moody, T.E.; Conca, J.

1996-09-01

Selected materials were tested to emulate a permeable barrier and to examine the (1) capture efficiency of these materials relating to the immobilization of strontium-90 and hexavalent chromium (Cr 6+ ) in Hanford Site groundwater; and (2) hydraulic conductivity of the barrier material relative to the surrounding area. The emplacement method investigated was a permeable reactive barrier to treat contaminated groundwater as it passes through the barrier. The hydraulic conductivity function was measured for each material, and retardation column experiments were performed for each material. Measurements determining the hydraulic conductivity at unsaturated through saturated water content were executed using the Unsaturated Flow Apparatus

PENERAPAN PEMBELAJARAN SAINS DENGAN PENDEKATAN SETS PADA MATERI CAHAYA UNTUK MENINGKATKAN HASIL BELAJAR SISWA KELAS V SD

Directory of Open Access Journals (Sweden)

Z. Ragil

2012-02-01

Full Text Available Penelitian ini dilatarbelakangi oleh nilai rata-rata dan presentase ketuntasan klasikal siswa yang masih rendah pada matapelajaran sains di SD. Untuk mengatasi permasalahan tersebut, diterapkan pembelajaran sains dengan pendekatan SETS(Science, Environment, Technology, Society. SETS adalah visi atau pendekatan pembelajaran yang memiliki fokus utamamemberikan pengalaman penyelidikan pada siswa untuk mendapatkan pengetahuan yang berkaitan dengan sains, lingkungan,teknologi, dan masyarakat serta kesalingketerkaitannya. Penelitian ini bertujuan untuk mendeskripsikan pembelajaran sainsdengan pendekatan SETS yang diterapkan, dan mengetahui peningkatan hasil belajar. Data penelitian berupa hasil belajar kognitifdiperoleh dari test, hasil belajar afektif dan psikomotorik diperoleh dari lembar observasi, untuk mengetahui peningkatan hasilbelajar siswa secara keseluruhan digunakan dalam penelitian ini adalah uji gain. Hasil analisis data menunjukkan adanyapeningkatan hasil belajar kognitif, afektif dan psikomotorik. Dari hasil analisis tersebut dapat disimpulkan bahwa penerapanpembelajaran sains dengan pendekatan SETS dapat meningkatkan hasil belajar siswa. This research was carried out with the background of low average mark and classical mastery percentage of science subject ofelementary school student. With the purpose of the research of describing science lesson with SETS approach to increase learningachievement, the researcher applies SETS approach in the lesson of light material. The data of cognitive learning achievement isfound by using test, while the affective and psychomotor ones are taken from observation sheets. In order to examine the overalllearning achievement, this study uses gain test. The data analysis shows that there is an improvement of cognitive, affective andpsychomotor learning achievements of student after having the lesson. It is concluded that the application of science lesson withSETS approach can increase the students

A Study on the Reuse of Plastic Concrete Using Extended Set-Retarding Admixtures

Science.gov (United States)

Lobo, Colin; Guthrie, William F.; Kacker, Raghu

1995-01-01

The disposal of ready mixed concrete truck wash water and returned plastic concrete is a growing concern for the ready mixed concrete industry. Recently, extended set-retarding admixtures, or stabilizers, which slow or stop the hydration of portland cement have been introduced to the market. Treating truck wash-water or returned plastic concrete with stabilizing admixtures delays its setting and hardening, thereby facilitating the incorporation of these typically wasted materials in subsequent concrete batches. In a statistically designed experiment, the properties of blended concrete containing stabilized plastic concrete were evaluated. The variables in the study included (1) concrete age when stabilized, (2) stabilizer dosage, (3) holding period of the treated (stabilized) concrete prior to blending with fresh ingredients, and (4) amount of treated concrete in the blended batch. The setting time, strength, and drying shrinkage of the blended concretes were evaluated. For the conditions tested, batching 5 % treated concrete with fresh material did not have a significant effect on the setting time, strength, or drying shrinkage of the resulting blended concrete. Batching 50 % treated concrete with fresh materials had a significant effect on the setting characteristics of the blended cocnrete, which in turn affected the water demand to maintain slump. The data suggests that for a known set of conditions, the stabilizer dosage can be optimized within a relatively narrow range to produce desired setting characteristics. The strength and drying shrinkage of the blended concretes were essentially a function of the water content at different sampling ages and the relationship followed the general trend of control concrete. PMID:29151762

A Study on the Reuse of Plastic Concrete Using Extended Set-Retarding Admixtures.

Science.gov (United States)

Lobo, Colin; Guthrie, William F; Kacker, Raghu

1995-01-01

The disposal of ready mixed concrete truck wash water and returned plastic concrete is a growing concern for the ready mixed concrete industry. Recently, extended set-retarding admixtures, or stabilizers, which slow or stop the hydration of portland cement have been introduced to the market. Treating truck wash-water or returned plastic concrete with stabilizing admixtures delays its setting and hardening, thereby facilitating the incorporation of these typically wasted materials in subsequent concrete batches. In a statistically designed experiment, the properties of blended concrete containing stabilized plastic concrete were evaluated. The variables in the study included (1) concrete age when stabilized, (2) stabilizer dosage, (3) holding period of the treated (stabilized) concrete prior to blending with fresh ingredients, and (4) amount of treated concrete in the blended batch. The setting time, strength, and drying shrinkage of the blended concretes were evaluated. For the conditions tested, batching 5 % treated concrete with fresh material did not have a significant effect on the setting time, strength, or drying shrinkage of the resulting blended concrete. Batching 50 % treated concrete with fresh materials had a significant effect on the setting characteristics of the blended cocnrete, which in turn affected the water demand to maintain slump. The data suggests that for a known set of conditions, the stabilizer dosage can be optimized within a relatively narrow range to produce desired setting characteristics. The strength and drying shrinkage of the blended concretes were essentially a function of the water content at different sampling ages and the relationship followed the general trend of control concrete.

Successful user experience strategy and roadmaps

CERN Document Server

Rosenzweig, Elizabeth

2015-01-01

Successful User Experience: Strategy and Roadmaps provides you with a hands-on guide for pulling all of the User Experience (UX) pieces together to create a strategy that includes tactics, tools, and methodologies. Leveraging material honed in user experience courses and over 25 years in the field, the author explains the value of strategic models to refine goals against available data and resources. You will learn how to think about UX from a high level, design the UX while setting goals for a product or project, and how to turn that into concrete actionable steps. After reading this book, y

Narrated animated solution videos in a mastery setting

Directory of Open Access Journals (Sweden)

Noah Schroeder

2015-02-01

Full Text Available Narrated animated solution videos were implemented in a clinical study that compared a mastery setting that employed repeated cycles of testing with instructional support to a group that had a single opportunity to experience the materials. The mastery setting students attempted sequential questions sets on a topic, with animated solutions between each set, until mastery was achieved, combining formative assessment with worked examples. Students showed significant improvement from their first to second tries on similar sets of problems, attributable to the feedback and solutions they were given after the first try. These improvements were shown in two topics, superposition and electric potential. The single try group was given one version of the questions and solutions, and while they were not required to watch the solutions to move forward, they chose to. On a post-test including near and far transfer questions, no significant difference was seen between the mastery group and the single try group, but both significantly outperformed a control group that received no instructional support, indicating that students successfully transferred the skills from the solutions to the post-test.

Patients' self-interested preferences: empirical evidence from a priority setting experiment.

Science.gov (United States)

Alvarez, Begoña; Rodríguez-Míguez, Eva

2011-04-01

This paper explores whether patients act according to self-interest in priority setting experiments. The analysis is based on a ranking experiment, conducted in Galicia (Spain), to elicit preferences regarding the prioritization of patients on a waiting list for an elective surgical intervention (prostatectomy for benign prostatic hyperplasia). Participants were patients awaiting a similar intervention and members of the general populations. All of them were asked to rank hypothetical patients on a waiting list. A rank-ordered logit was then applied to their responses in order to obtain a prioritization scoring system. Using these estimations, we first test for differences in preferences between patients and general population. Second, we implement a procedure based on the similarity between respondents (true patients) and the hypothetical scenarios they evaluate (hypothetical patients) to analyze whether patients provide self-interested rankings. Our results show that patient preferences differ significantly from general population preferences. The findings also indicate that, when patients rank the hypothetical scenarios on the waiting list, they consider not only the explicit attributes but also the similarity of each scenario to their own. In particular, they assign a higher priority to scenarios that more closely match their own states. We also find that such a preference structure increases their likelihood of reporting "irrational" answers. Copyright © 2011 Elsevier Ltd. All rights reserved.

Job Resources, Physician Work Engagement, and Patient Care Experience in an Academic Medical Setting.

Science.gov (United States)

Scheepers, Renée A; Lases, Lenny S S; Arah, Onyebuchi A; Heineman, Maas Jan; Lombarts, Kiki M J M H

2017-10-01

Physician work engagement is associated with better work performance and fewer medical errors; however, whether work-engaged physicians perform better from the patient perspective is unknown. Although availability of job resources (autonomy, colleague support, participation in decision making, opportunities for learning) bolster work engagement, this relationship is understudied among physicians. This study investigated associations of physician work engagement with patient care experience and job resources in an academic setting. The authors collected patient care experience evaluations, using nine validated items from the Dutch Consumer Quality index in two academic hospitals (April 2014 to April 2015). Physicians reported job resources and work engagement using, respectively, the validated Questionnaire on Experience and Evaluation of Work and the Utrecht Work Engagement Scale. The authors conducted multivariate adjusted mixed linear model and linear regression analyses. Of the 9,802 eligible patients and 238 eligible physicians, respectively, 4,573 (47%) and 185 (78%) participated. Physician work engagement was not associated with patient care experience (B = 0.01; 95% confidence interval [CI] = -0.02 to 0.03; P = .669). However, learning opportunities (B = 0.28; 95% CI = 0.05 to 0.52; P = .019) and autonomy (B = 0.31; 95% CI = 0.10 to 0.51; P = .004) were positively associated with work engagement. Higher physician work engagement did not translate into better patient care experience. Patient experience may benefit from physicians who deliver stable quality under varying levels of work engagement. From the physicians' perspective, autonomy and learning opportunities could safeguard their work engagement.

International Experience with Key Program Elements of IndustrialEnergy Efficiency or Greenhouse Gas Emissions Reduction Target-SettingPrograms

Energy Technology Data Exchange (ETDEWEB)

Price, Lynn; Galitsky, Christina; Kramer, Klaas Jan

2008-02-02

Target-setting agreements, also known as voluntary ornegotiated agreements, have been used by a number of governments as amechanism for promoting energy efficiency within the industrial sector. Arecent survey of such target-setting agreement programs identified 23energy efficiency or GHG emissions reduction voluntary agreement programsin 18 countries. International best practice related to target-settingagreement programs calls for establishment of a coordinated set ofpolicies that provide strong economic incentives as well as technical andfinancial support to participating industries. The key program elementsof a target-setting program are the target-setting process,identification of energy-saving technologies and measures usingenergy-energy efficiency guidebooks and benchmarking as well as byconducting energy-efficiency audits, development of an energy-savingsaction plan, development and implementation of energy managementprotocols, development of incentives and supporting policies, monitoringprogress toward targets, and program evaluation. This report firstprovides a description of three key target-setting agreement programs andthen describes international experience with the key program elementsthat comprise such programs using information from the three keytarget-setting programs as well as from other international programsrelated to industrial energy efficiency or GHG emissionsreductions.

Gamma-ray spectrometry of ultra low levels of radioactivity within the material screening program for the GERDA experiment.

Science.gov (United States)

Budjás, D; Gangapshev, A M; Gasparro, J; Hampel, W; Heisel, M; Heusser, G; Hult, M; Klimenko, A A; Kuzminov, V V; Laubenstein, M; Maneschg, W; Simgen, H; Smolnikov, A A; Tomei, C; Vasiliev, S I

2009-05-01

In present and future experiments in the field of rare events physics a background index of 10(-3) counts/(keV kg a) or better in the region of interest is envisaged. A thorough material screening is mandatory in order to achieve this goal. The results of a systematic study of radioactive trace impurities in selected materials using ultra low-level gamma-ray spectrometry in the framework of the GERDA experiment are reported.

Microwave Palaeointensity Experiments On Terrestrial and Martian Material

Science.gov (United States)

Shaw, J.; Hill, M.; Gratton, M.

The microwave palaeointensity technique was developed in Liverpool University (Walton et al 1996) and has successfully been applied to archaeological ceramics and recent lavas (Shaw et al 1996, 1999.; Hill et al 1999,2000). These published results show that microwave analysis provides accurate palaeointensity determinations com- bined with a very high success rate. Most recently the technique has been successfully applied to Martian material (Shaw et al, 2001) to look for the existence of an internal Martian dynamo early in Martian history. New experiments have been carried out us- ing microwaves to demagnetise synthetic muti-component TRM's and new palaeoin- tensity experiments providing a comparison between microwave analysis of laboratory TRM's and conventional thermal Thellier analysis of microwave generated mTRM's. These experiments demonstrate the equivalence of microwave and thermally gener- ated TRM's. D. Walton, S Snape, T.C. Rolph, J. Shaw and J.A. Share, Application of ferromagnetic resonance heating to palaeointensity determinations.1996, Phys Earth Planet Int,94, 183-186. J. Shaw, D. Walton, S Yang, T.C.Rolph, and J.A. Share. Microwave Archaeointensities from Peruvian Ceramics. 1996, Geophys. J. Int,124,241-244 J. Shaw, S. Yang, T. C. Rolph, and F. Y. Sun. A comparison of archaeointensity results from Chinese ceramics using Microwave and conventional ThellierSs and ShawSs methods.,1999, G J Int.136, 714-718 M. Hill, and J. Shaw, 1999, Palaeointensity results for Historic Lavas from Mt. Etna using microwave demagnetisation/remagnetisation in a modified Thellier type exper- iment. G. J. Int, 139, 583-590 M. J. Hill, and J. Shaw, 2000. Magnetic field intensity study of the 1960 Kilauea lava flow, Hawaii, using the microwave palaeointensity technique, Geophys. J. Int., 142, 487-504. J. Shaw, M. Hill, and S. J. Openshaw, 2001, Investigating the ancient Martian magnetic field using microwaves, Earth and Planetary Science Letters 190 (2001) 103-109

Developing antitobacco mass media campaign messages in a low-resource setting: experience from the Kingdom of Tonga

Science.gov (United States)

Sugden, C; Phongsavan, P; Gloede, S; Filiai, S; Tongamana, V O

2017-01-01

Tobacco use has become the leading cause of preventable death in Tonga, a small island nation in the South Pacific. One pragmatic and economical strategy to address this worrying trend is to adapt effective antitobacco mass media materials developed in high-income countries for local audiences. Using Tonga as an example, this paper shares the practical steps involved in adapting antitobacco campaign materials for local audiences with minimal resources, a limited budget and without the need for an external production team. The Tongan experience underscores the importance of an adaptation process that draws from evidence-based best-practice models and engages local and regional stakeholders to ensure that campaign materials are tailored to the local context and are embedded within a mix of antitobacco strategies. PMID:26969171

Articulating Material Criteria

DEFF Research Database (Denmark)

Hasling, Karen Marie

2013-01-01

, imitate and articulate the students’ inclusion of materials. This paper particularly discusses the experiences made and ideas generated after the execution of a material science course for second year students, with emphasis on the concept of the material selection matrix as an educational tool......This paper discusses the experiences and potentials with materials teaching at the Institute for Product Design at Kolding School of Design, using materials teaching as experiments in my PhD project. The project intents to create a stronger material awareness among product design students...... with emphasis on sustainability. The experiments aim to develop an understanding of, how product design students include materials in their design practice and how tools can be developed that further enhance this. Hence experiments are essential for the progress of the PhD project as they help to observe...

Healing process following application of set or fresh mineral trioxide aggregate as a root-end filling material.

Science.gov (United States)

Habibi, Mehdi; Ghoddusi, Jamileh; Habibi, Ataollah; Mohtasham, Nooshin

2011-01-01

An unsuccessful attempt to reach the apical area or to place the retrograde material is a major difficulty in periradicular surgery. The aim of this study was to compare the histological evaluation of the healing process following an orthograde versus a retrograde application of mineral trioxide aggregate (MTA) as a root-end filling material during apical surgery on cats' teeth in order to find out whether orthograde placement of MTA before surgery can be used instead of retrograde placement during surgery. In this experimental study, 24 canine teeth in 12 mature and healthy cats were filled with either MTA or gutta-percha in an orthograde manner. Two weeks later, the teeth with MTA were surgically exposed and resected to the set-MTA within the canals. The teeth previously filled by gutta-percha were also surgically exposed, and retrograde cavities were prepared at the root ends and filled with fresh-MTA. After 8 weeks, the animals were euthanized by vital perfusion. Six-micron histological slices were prepared from samples, stained by Hematoxylin & Eosin, and histologically studied by means of a light microscope. The collected data was analyzed by the Chi-square and the T-test. One of the samples in the fresh-MTA group was omitted during processing because of inappropriate sectioning. In the set-MTA group, 5 out of 12 showed chronic abscess, while in the fresh-MTA group, 2 out of 11 were discovered to have chronic abscess; however, no significant difference was observed (P>.05). Hard tissue healing (cementum, bone, cementum + bone formation) in the set-MTA and fresh-MTA groups were 7 out of 12 and 9 out of 11, respectively. While healing seemed more likely to occur in the fresh-MTA group, the difference was statistically insignificant (P>.05). The magnitude of bone, cementum, or bone and cementum formation showed slight differences between the two groups; however, the figures failed to show any marked differences (P>.05). Orthograde placement of MTA could be used

Elements of set theory

CERN Document Server

Enderton, Herbert B

1977-01-01

This is an introductory undergraduate textbook in set theory. In mathematics these days, essentially everything is a set. Some knowledge of set theory is necessary part of the background everyone needs for further study of mathematics. It is also possible to study set theory for its own interest--it is a subject with intruiging results anout simple objects. This book starts with material that nobody can do without. There is no end to what can be learned of set theory, but here is a beginning.

"Looking and Listening-In": A Methodological Approach to Generating Insights into Infants' Experiences of Early Childhood Education and Care Settings

Science.gov (United States)

Sumsion, Jennifer; Goodfellow, Joy

2012-01-01

In this article, we describe an observational approach, "looking and listening-in," that we have used to try to understand the experience of an infant in an Australian family day-care home. The article is drawn from a larger study of infants' experiences of early childhood education and care settings. In keeping with the mosaic…

Setting priorities for space research: An experiment in methodology

Science.gov (United States)

1995-01-01

In 1989, the Space Studies Board created the Task Group on Priorities in Space Research to determine whether scientists should take a role in recommending priorities for long-term space research initiatives and, if so, to analyze the priority-setting problem in this context and develop a method by which such priorities could be established. After answering the first question in the affirmative in a previous report, the task group set out to accomplish the second task. The basic assumption in developing a priority-setting process is that a reasoned and structured approach for ordering competing initiatives will yield better results than other ways of proceeding. The task group proceeded from the principle that the central criterion for evaluating a research initiative must be its scientific merit -- the value of the initiative to the proposing discipline and to science generally. The group developed a two-stage methodology for priority setting and constructed a procedure and format to support the methodology. The first of two instruments developed was a standard format for structuring proposals for space research initiatives. The second instrument was a formal, semiquantitative appraisal procedure for evaluating competing proposals. This report makes available complete templates for the methodology, including the advocacy statement and evaluation forms, as well as an 11-step schema for a priority-setting process. From the beginning of its work, the task group was mindful that the issue of priority setting increasingly pervades all of federally supported science and that its work would have implications extending beyond space research. Thus, although the present report makes no recommendations for action by NASA or other government agencies, it provides the results of the task group's work for the use of others who may study priority-setting procedures or take up the challenge of implementing them in the future.

Cardiovascular disease prevention in low resource settings: lessons from the Heartfile experience in Pakistan.

Science.gov (United States)

Nishtar, Sania

2003-01-01

This paper outlines activities of the Heartfile Program in Pakistan (http://heartfile.org). The program focuses on cardiovascular disease prevention and health promotion, and includes several initiatives that encompass building policy, reorienting health services, and developing community interventions that utilize the print and electronic media and outreach at the grass-root level to incorporate social marketing approaches. Initiated by the nonprofit private sector, the program now links with major public sector primary healthcare programs, and is currently spearheading formulation of the National Action Plan on Noncommunicable Disease Prevention and Control in Pakistan. In addition, the program is being refined, validated, and packaged as a replicable model for other developing countries and in low resource settings, utilizing appropriate principles of franchising with inbuilt components sensitive to cultural and social adaptations. A review of the planning process, implementation strategy, and fund-raising experience is presented. Strategies unique to low resource settings, such as the development of cost- and time-efficient strategic alliances and partnerships, have also been highlighted. In addition, specific caveats are identified as being helpful to private sector development of chronic disease prevention programs in resource-constrained settings, and a road map to a sustainable public-private sector partnership is provided.

Solar furnace experiments for thermophysical properties studies of rare-earth oxide MHD materials

International Nuclear Information System (INIS)

Coutures, J.P.

1978-01-01

Some high temperature work performed with solar furnaces on rare earth oxides is reviewed. Emphasis is on the thermophysical properties (refractoriness, vaporization behavior) and the nature of solid solution on materials which could be used as electrodes for the MHD process. As new sources of energy are being developed due to the world energy crisis, MHD conversion could be useful. The development of MHD systems requires new efforts to develop and optimize materials properties. These materials must have good mechanical and electrical properties (if possible, pure electronic conduction with good emission). Because of the high temperature in MHD generators, the materials for electrodes must have good refractoriness and also must resist vaporization and corrosion at high temperature (T approx. 2000 0 C). Rare-earth oxides are the basic components for most of the MHD electrode materials and it is important to know their thermophysical properties (solidification point phase transitions, heat of fusion and of phase transition, vapor pressure). Because of the high temperature range and the nature of the atmosphere in which these experiments must be performed, special equipment adapted to solar furnaces was developed

Economic communication model set

Science.gov (United States)

Zvereva, Olga M.; Berg, Dmitry B.

2017-06-01

This paper details findings from the research work targeted at economic communications investigation with agent-based models usage. The agent-based model set was engineered to simulate economic communications. Money in the form of internal and external currencies was introduced into the models to support exchanges in communications. Every model, being based on the general concept, has its own peculiarities in algorithm and input data set since it was engineered to solve the specific problem. Several and different origin data sets were used in experiments: theoretic sets were estimated on the basis of static Leontief's equilibrium equation and the real set was constructed on the basis of statistical data. While simulation experiments, communication process was observed in dynamics, and system macroparameters were estimated. This research approved that combination of an agent-based and mathematical model can cause a synergetic effect.

Material report in support to RCC-MRX code 2010 stainless steel parts and products

International Nuclear Information System (INIS)

Ancelet, Olivier; Lebarbe, Thierry; Dubiez-Le Goff, Sophie; Bonne, Dominique; Gelineau, Odile

2012-01-01

This paper presents the Material Report dedicated to stainless steels parts and products issued by AFCEN (Association Francaise pour les regles de Conception et de Construction des Materiels des Chaudieres Electro-Nucleaires) in support to RCC-MRx 2010 Code. The RCC-MRx Code is the result of the merger of the RCC-MX 2008, developed in the context of the research reactor Jules Horowitz Reactor project, in the RCC-MR 2007, which set up rules applicable to the design of components operating at high temperature and to the Vacuum Vessel of ITER (a presentation of RCC-MRx 2010 Code is the subject of another paper proposed in this Congress; it explains in particular the status of this Code). This Material Report is part of a set of Criteria of RCC-MRx (this set of Criteria is under construction). The Criteria aim at explaining the design and construction rules of the Code. They cover analyses rules as well as part procurement, welding, methods of tests and examination and fabrication rules. The Material Report particularly provides justifications and explanations on requirements and features dealing with parts and products proposed in the Code. The Material Report contains the following information: Introduction of the grade(s): codes and standards and Reference Procurement Specifications covering parts and products, applications and experience gained, - Physical properties, - Mechanical properties used for design calculations (base metal and welds): basic mechanical properties, creep mechanical properties, irradiated mechanical properties, - Fabrication: experience gained, metallurgy, - Welding: weldability, experience gained during welding and repair procedure qualifications, - Non-destructive examination, - In-service behaviour. In the article, examples of data supplied in the Material Report dedicated to stainless steels will be exposed. (authors)

Ferromagnetic shape memory materials

Science.gov (United States)

Tickle, Robert Jay

Ferromagnetic shape memory materials are a new class of active materials which combine the properties of ferromagnetism with those of a diffusionless, reversible martensitic transformation. These materials have been the subject of recent study due to the unusually large magnetostriction exhibited in the martensitic phase. In this thesis we report the results of experiments which characterize the magnetic and magnetomechanical properties of both austenitic and martensitic phases of ferromagnetic shape memory material Ni2MnGa. In the high temperature cubic phase, anisotropy and magnetostriction constants are determined for a range of temperatures from 50°C down to the transformation temperature, with room temperature values of K1 = 2.7 +/- 104 ergs/cm3 and lambda100 = -145 muepsilon. In the low temperature tetragonal phase, the phenomenon of field-induced variant rearrangement is shown to produce anomalous results when traditional techniques for determining anisotropy and magnetostriction properties are employed. The requirement of single variant specimen microstructure is explained, and experiments performed on such a specimen confirm a uniaxial anisotropy within each martensitic variant with anisotropy constant Ku = 2.45 x 106 ergs/cm3 and a magnetostriction constant of lambdasv = -288 +/- 73 muepsilon. A series of magnetomechanical experiments investigate the effects of microstructure bias, repeated field cycling, varying field ramp rate, applied load, and specimen geometry on the variant rearrangement phenomenon in the martensitic phase. In general, the field-induced strain is found to be a function of the variant microstructure. Experiments in which the initial microstructure is biased towards a single variant state with an applied load generate one-time strains of 4.3%, while those performed with a constant bias stress of 5 MPa generate reversible strains of 0.5% over a period of 50 cycles. An increase in the applied field ramp rate is shown to reduce the

Skylab experiments. Volume 3: Materials science. [Skylab experiments on metallurgy, crystal growth, semiconductors, and combustion physics in weightless environment for high school level education

Science.gov (United States)

1973-01-01

The materials science and technology investigation conducted on the Skylab vehicle are discussed. The thirteen experiments that support these investigations have been planned to evaluate the effect of a weightless environment on melting and resolidification of a variety of metals and semiconductor crystals, and on combustion of solid flammable materials. A glossary of terms which define the space activities and a bibliography of related data are presented.

Review of US accident/incident experience involving the transportation of radioactive material (RAM) 1971-1980

International Nuclear Information System (INIS)

McClure, J.D.; Emerson, E.L.

1980-01-01

This paper analyzes the transportation accidents and incidents which have occurred in the United States in the period 1971-1980 based upon the information in the Radioactive Material Transportation Accident/Incident Data Base developed by the Transportation Technology Center (TTC) at Sandia National Laboratories. The accident/incident data base incorporates the files of the Hazardous Material Incident Report (HMIR) system operated by the Material Transportation Bureau of the US Department of Transportation (DOT) with additional information obtained from the files of the US Nuclear Regulatory Commission (NRC). A principal objective of this paper is to summarize US accident/incident experience for the past ten years, providing a concise statement of radioactive material (RAM) package failure description for the transport modes of truck, rail and air

Elderly Men’s Experience of Information Material about Melanoma—A Qualitative Study

Directory of Open Access Journals (Sweden)

Kristina Rosengren

2013-07-01

Full Text Available Malignant melanoma is an aggressive disease that has been increasing worldwide. Public education is trying to focus on reducing intense sun exposure and raise awareness of signs and symptoms to prevent illness. The aim of the study was to describe and analyze elderly men’s (over 65 years experience of an information booklet regarding malignant melanoma. The study comprised of a total of 15 interviews with elderly men. The interviews were analyzed using manifest qualitative content analysis. Respect for the individuals was a main concern in the study. One category, Security—to act, and three subcategories, Availability—to use, Clarity—to understand, and Awareness—to know, were identified to describe the men’s experiences of information material about melanoma. By using person-centered care, based on a holistic approach focusing on men’s need for security to act on specific risk factors and to do skin self-examination, health could be improved. The results of this study could help other health organizations to develop information material to prevent illness, such as for skin self-examination. Strategies concerning educating, preparing, and training health professionals in interpersonal communication skills should be implemented in healthcare organizations to meet patients’ information needs about illness to develop continuous learning and quality improvement.

Portland cement hydration and early setting of cement stone intended for efficient paving materials

Science.gov (United States)

Grishina, A.

2017-10-01

Due to the growth of load on automotive roads, modern transportation engineering is in need of efficient paving materials. Runways and most advanced highways require Portland cement concretes. This makes important the studies directed to improvement of binders for such concretes. In the present work some peculiarities of the process of Portland cement hydration and early setting of cement stone with barium hydrosilicate sol were examined. It was found that the admixture of said sol leads to a shift in the induction period to later times without significant change in its duration. The admixture of a modifier with nanoscale barium hydrosilicates increases the degree of hydration of the cement clinker minerals and changes the phase composition of the hydration products; in particular, the content of portlandite and tricalcium silicate decreases, while the amount of ettringite increases. Changes in the hydration processes of Portland cement and early setting of cement stone that are caused by the nanoscale barium hydrosilicates, allow to forecast positive technological effects both at the stage of manufacturing and at the stage of operation. In particular, the formwork age can be reduced, turnover of molds can be increased, formation of secondary ettringite and corrosion of the first type can be eliminated.

The Material Plasma Exposure eXperiment (MPEX)

Science.gov (United States)

Rapp, J.; Biewer, T. M.; Bigelow, T. S.; Canik, J.; Caughman, J. B. O.; Duckworth, R. C.; Goulding, R. H.; Hillis, D. L.; Lore, J. D.; Lumsdaine, A.; McGinnis, W. D.; Meitner, S. J.; Owen, L. W.; Shaw, G. C.; Luo, G.-N.

2014-10-01

Next generation plasma generators have to be able to access the plasma conditions expected on the divertor targets in ITER and future devices. The Material Plasma Exposure eXperiment (MPEX) will address this regime with electron temperatures of 1--10 eV and electron densities of 1021--1020 m-3. The resulting heat fluxes are about 10 MW/m2. MPEX is designed to deliver those plasma conditions with a novel Radio Frequency plasma source able to produce high density plasmas and heat electron and ions separately with Electron Bernstein Wave (EBW) heating and Ion Cyclotron Resonance Heating (ICRH). Preliminary modeling has been used for pre-design studies of MPEX. MPEX will be capable to expose neutron irradiated samples. In this concept targets will be irradiated in ORNL's High Flux Isotope Reactor (HFIR) or possibly at the Spallation Neutron Source (SNS) and then subsequently (after a sufficient long cool-down period) exposed to fusion reactor relevant plasmas in MPEX. The current state of the pre-design of MPEX including the concept of handling irradiated samples will be presented. ORNL is managed by UT-Battelle, LLC, for the U.S. DOE under Contract DE-AC-05-00OR22725.

Progress in the Development of a High Power Helicon Plasma Source for the Materials Plasma Exposure Experiment

Energy Technology Data Exchange (ETDEWEB)

Goulding, Richard Howell [ORNL; Caughman, John B. [ORNL; Rapp, Juergen [ORNL; Biewer, Theodore M. [ORNL; Bigelow, Tim S. [ORNL; Campbell, Ian H. [ORNL; Caneses Marin, Juan F. [ORNL; Donovan, David C. [ORNL; Kafle, Nischal [ORNL; Martin, Elijah H. [ORNL; Ray, Holly B. [ORNL; Shaw, Guinevere C. [ORNL; Showers, Melissa A. [ORNL

2017-09-01

Proto-MPEX is a linear plasma device being used to study a novel RF source concept for the planned Material Plasma Exposure eXperiment (MPEX), which will address plasma-materials interaction (PMI) for nuclear fusion reactors. Plasmas are produced using a large diameter helicon source operating at a frequency of 13.56 MHz at power levels up to 120 kW. In recent experiments the helicon source has produced deuterium plasmas with densities up to ~6 × 1019 m–3 measured at a location 2 m downstream from the antenna and 0.4 m from the target. Previous plasma production experiments on Proto-MPEX have generated lower density plasmas with hollow electron temperature profiles and target power deposition peaked far off axis. The latest experiments have produced flat Te profiles with a large portion of the power deposited on the target near the axis. This and other evidence points to the excitation of a helicon mode in this case.

Development of a materials data base for modeling

International Nuclear Information System (INIS)

Iwata, S.; Ashino, T.; Ishino, S.

1988-01-01

Materials selection for fusion reactors requires a materials data base and a set of methods to estimate material properties in a ''virtual'' fusion reactor. This estimation process, namely, modeling, is analyzed as compromising of design requirements, available data bases and methods of estimation, and a concept of an ideal computer system to support this modeling process is proposed. The limitations of a commercial DBMS (Data Base Management System) to handle sophisticated materials data are described in accordance with our experiences. Secondly, ways to manipulate analytical expressions are discussed as the next step for computer assisted modeling. Finally, an advanced method is presented which is able to manage models and data in the same manner without paying attention to annoying rules compelled by constraints of using computers. (orig.)

Being the Bridge: The Lived Experience of Educating with Online Courseware in the High School Blended Learning Setting

Science.gov (United States)

Rambo, Anna Lynn

2011-01-01

This dissertation explores the lived experiences of educators who teach in flex model blended learning settings using online, vendor-provided courseware. The tradition of hermeneutic phenomenology grounds this inquiry (Heidegger, 1927/2008). Phenomenological research activities designed by van Manen (1990, 2002) provide the methodological…

Results and analysis of reactor-material experiments on ex-vessel corium quench and dispersal

International Nuclear Information System (INIS)

Spencer, B.W.; McUmber, L.M.; Sienicki, J.J.; Squarer, D.

1984-01-01

The results of reactor material experiments and related analysis are described in which molten corium is injected into a mock-up of the reactor cavity region of a PWR. The experiments address exvessel interactions such as steam generation (for those cases in which water is present), water and corium dispersal from the cavity, hydrogen generation, direct atmosphere heating by dispersed corium, and debrids characterization. Test results indicate efficiencies of steam generation by corium quench ranging up to 65%. Corium sweepout of up to 62% of the injected material was found for those conditions in which steam generation flowrate was augmented by vessel blowdown. The dispersed corium caused very little direct heating of the atmosphere for the configuration employing a trap at the exit of the cavity-to-containment pathway. Corium sweepout phenomena were modeled for high-pressure blowdown conditions, and the results applied to the full-size reactor system predict essentially complete sweepout of corium from the reactor cavity. (orig.)

Results and analysis of reactor-material experiments on ex-vessel corium quench and dispersal

International Nuclear Information System (INIS)

Spencer, B.W.; McUmber, L.M.; Sienicki, J.J.; Squarer, D.

1984-01-01

Results of reactor-material experiments and related analysis are described in which molten corium is injected into a mock-up of the reactor cavity region of a PWR. The experiments address ex-vessel interactions such as steam generation (for those cases in which water is present), water and corium dispersal from the cavity, hydrogen generation, direct atmosphere heating by dispersed corium, and debris characterization. Test results indicate efficiencies of steam generation by corium quench ranging up to 65%. Corium sweepout of up to 62% of the injected material was found for those conditions in which steam generation flowrate was augmented by vessel blowdown. The dispersed corium caused very little direct heating of the atmosphere for the configuration employing a trap at the exit of the cavity-to-containment pathway. Corium sweepout phenomena were modeled for high-pressure blowdown conditions, and the results applied to the full-size reactor system predict essentially complete sweepout of corium from the reactor cavity

Properties of selected superconductive materials, 1978 supplement. Technical note

International Nuclear Information System (INIS)

Roberts, B.W.

1978-10-01

This report includes data on additional superconductive materials extracted from the world literature up to fall 1977 and is an addendum to the data set published in J. Phys. Chem. Ref. Data 5, no. 3, 581-821 (1976) (Reprint no. 84). The data presented are new values and have not been selected or compared to values (except for selected values of the elements) previously assembled by the Superconductive Materials Data Center. The properties included are composition, critical temperature, critical magnetic field, crystal structure and the results of negative experiments. Special tabulations of high magnetic field materials with Type II behavior and materials with organic components are included. All entries are keyed to the literature. A list of recent reviews centered on superconductive materials is included

Evaluation of diffusion parameters of radon in porous material by flow-through diffusion experiment

International Nuclear Information System (INIS)

Chunnan Hsu; Shihchin Tsai; Shihming Liang

1994-01-01

The effectiveness of a material in reducing the fluence rate of Rn from soil was assessed in this study by using a flow-through diffusion experiment to evaluate the diffusion parameters -apparent diffusion coefficient and capacity factor - of radon (Rn) in a porous material. An improved method based on the nonlinear least-squares and Marquardt's method (NLSM method) was proposed to provide more reliable analyses of experimental data than the graphical method. The NLSM method was confirmed by the experimental results to be capable of estimating the diffusion parameters, even if the process was transient. This method was also demonstrated to correlate sufficiently with the results by the conventional method while the process had already reached steady-state. Natural mordenite was employed in this study as a testing material because it has more effective sorption for noble gas than any other earthen material. (author)

Assessment of Barriers to Providing Introductory Pharmacy Practice Experiences (IPPEs in the Hospital Setting

Directory of Open Access Journals (Sweden)

Matthew J Gibson

2016-07-01

Full Text Available Objectives: The primary objective of the study is to identify the barriers to providing Introductory Pharmacy Practice Experiences (IPPEs in the hospital setting. Methods: Potential barriers to IPPEs were identified via literature review and interviews with current IPPE preceptors from various institutions. Based on this information, an electronic survey was developed and distributed to IPPE preceptors in order to assess student, preceptor, logistical and college or school of pharmacy related barriers that potentially exist for providing IPPE in the hospital setting. Results: Sixty-eight of the 287 eligible survey respondents (24% completed the electronic survey. Seventy-six percent of respondents agreed or strongly agreed that available time was a barrier to precepting IPPE students even though a majority of respondents reported spending a third or more of their day with an IPPE student when on rotation. Seventy-three percent of respondents disagreed or strongly disagreed that all preceptors have consistent performance expectations for students, while just 46% agreed or strongly agreed that they had adequate training to precept IPPEs. Sixty-five percent of respondents agreed that IPPE students have the ability to be a participant in patient care and 70% of preceptors believe that IPPE students should be involved in patient care. Conclusions: Conducting IPPEs in the institutional setting comes with challenges. Based on the results of this study, experiential directors and colleges/schools of pharmacy could make a positive impact on the quality and consistency of IPPEs by setting student expectations and training preceptors on appropriate and consistent expectations for students.   Type: Original Research

Experiment of forced convection heat transfer using microencapsulated phase-change-material slurries

International Nuclear Information System (INIS)

Kubo, Shinji; Akino, Norio; Tanaka, Amane; Nagashima, Akira.

1997-01-01

The present study describes an experiment on forced convective heat transfer using a water slurry of Microencapsulated Phase-change-material. A normal paraffin hydrocarbon is microencapsulated by melamine resin, melting point of 28.1degC. The heat transfer coefficient and pressure drop in a circular tube were evaluated. The heat transfer coefficient using the slurry in case with and without phase change were compared to in case of using pure water. (author)

Feasibility of Pb phytoextraction using nano-materials assisted ryegrass: Results of a one-year field-scale experiment.

Science.gov (United States)

Liang, Shu-Xuan; Jin, Yu; Liu, Wei; Li, Xiliang; Shen, Shi-Gang; Ding, Ling

2017-04-01

The effect of the combined application of nano-hydroxyapatite (NHAP) or nano-carbon black (NCB) on the phytoextraction of Pb by ryegrass was investigated as an enhanced remediation technique for soils by field-scale experiment. After the addition of 0.2% NHAP or NCB to the soil, temporal variation of the uptake of Pb in aboveground parts and roots were observed. Ryegrass shoot concentrations of Pb were lower with nano-materials application than without nano-materials for the first month. However, the shoot concentrations of Pb were significantly increased with nano-materials application, in particular NHAP groups. The ryegrass root concentrations of Pb were lower with nano-materials application for the first month. These results indicated that nano-materials had significant effects on stabilization of lead, especially at the beginning of the experiment. Along with the experimental proceeding, phytotoxicity was alleviated after the incorporation of nano-materials. The ryegrass biomass was significantly higher with nano-materials application. Consequently, the Pb phytoextraction potential of ryegrass significantly increased with nano-materials application compared to the gounps without nano-materials application. The total removal rates of soil Pb were higher after combined application of NHAP than NCB. NHAP is more suitable than NCB for in-situ remediation of Pb-contaminated soils. The ryegrass translocation factor exhibited a marked increase with time. It was thought that the major role of NHP and NBA might be to alleviate the Pb phytotoxicity and increase biomass of plants. Copyright © 2016 Elsevier Ltd. All rights reserved.

Sharing Attention and Activities among Toddlers: The Spatial Dimension of the Setting and the Educator's Role

Science.gov (United States)

Musatti, Tullia; Mayer, Susanna

2011-01-01

The study proposes an analysis of the processes through which the material and symbolic features of the setting and the activities of the educators interact to determine the children's experience in an early educational centre. This analysis is of particular interest with regard to both educational practice and understanding developmental…

Construct Validity and Reliability of Structured Assessment of endoVascular Expertise in a Simulated Setting

DEFF Research Database (Denmark)

Bech, B; Lönn, L; Falkenberg, M

2011-01-01

Objectives To study the construct validity and reliability of a novel endovascular global rating scale, Structured Assessment of endoVascular Expertise (SAVE). Design A Clinical, experimental study. Materials Twenty physicians with endovascular experiences ranging from complete novices to highly....... Validity was analysed by correlating experience with performance results. Reliability was analysed according to generalisability theory. Results The mean score on the 29 items of the SAVE scale correlated well with clinical experience (R = 0.84, P ... with clinical experience (R = -0.53, P validity and reliability of assessment with the SAVE scale was high when applied to performances in a simulation setting with advanced realism. No ceiling effect...

Reference material systems: a sourcebook for material assessment

Energy Technology Data Exchange (ETDEWEB)

Bhagat, N. (ed.)

1976-12-01

A reference set of data related to material systems and a framework for carrying out the material technologies assessment are presented. While the bulk of renewables have been considered in this report, the nonrenewable materials dealt with here include structural materials only, such as steel, aluminum, cement and concrete, and bricks. The complete data set is supposed to include material flows, energy requirements, capital and labor inputs, and environmental effects for each process that a resource must go through to become a useful material for an end use. Although effort has been made to obtain as much information as possible, considerable gaps in data, apparent throughout this report, could not be avoided. A new material technology can be evaluated by substituting that technology for appropriate elements of the reference materials system and calculating the net change in material resource, energy, capital and labor requirements, and environmental impacts. This combination of information thus serves as a means of evaluating the potential benefits to be gained by research in various material technologies.

Eliciting preferences for priority setting in genetic testing: a pilot study comparing best-worst scaling and discrete-choice experiments

OpenAIRE

Severin, Franziska; Schmidtke, Jörg; Mühlbacher, Axel; Rogowski, Wolf H

2013-01-01

Given the increasing number of genetic tests available, decisions have to be made on how to allocate limited health-care resources to them. Different criteria have been proposed to guide priority setting. However, their relative importance is unclear. Discrete-choice experiments (DCEs) and best-worst scaling experiments (BWSs) are methods used to identify and weight various criteria that influence orders of priority. This study tests whether these preference eliciting techniques can be used f...

Aging mechanisms in amorphous phase-change materials.

Science.gov (United States)

Raty, Jean Yves; Zhang, Wei; Luckas, Jennifer; Chen, Chao; Mazzarello, Riccardo; Bichara, Christophe; Wuttig, Matthias

2015-06-24

Aging is a ubiquitous phenomenon in glasses. In the case of phase-change materials, it leads to a drift in the electrical resistance, which hinders the development of ultrahigh density storage devices. Here we elucidate the aging process in amorphous GeTe, a prototypical phase-change material, by advanced numerical simulations, photothermal deflection spectroscopy and impedance spectroscopy experiments. We show that aging is accompanied by a progressive change of the local chemical order towards the crystalline one. Yet, the glass evolves towards a covalent amorphous network with increasing Peierls distortion, whose structural and electronic properties drift away from those of the resonantly bonded crystal. This behaviour sets phase-change materials apart from conventional glass-forming systems, which display the same local structure and bonding in both phases.

Study of the structure and development of the set of reference materials of composition and structure of heat resisting nickel and intermetallic alloys

Directory of Open Access Journals (Sweden)

E. B. Chabina

2016-01-01

Full Text Available Relevance of research: There are two sizes (several microns and nanodimensional of strengthening j'-phase in single-crystal heat resisting nickel and intermetallic alloys, used for making blades of modern gas turbine engines (GTD. For in-depth study of structural and phase condition of such alloys not only qualitative description of created structure is necessary, but quantitative analysis of alloy components geometrical characteristics. Purpose of the work: Development of reference material sets of heat resisting nickel and intermetallic alloy composition and structure. Research methods: To address the measurement problem of control of structural and geometrical characteristics of single-crystal heat resisting and intermetallic alloys by analytical microscopy and X-ray diffraction analysis the research was carried out using certified measurement techniques on facilities, entered in the Register of Measurement Means of the Russian Federation. The research was carried out on microsections, foils and plates, cut in the plane {100}. Results: It is established that key parameters, defining the properties of these alloys are particle size of strengthening j' -phase, the layer thickness of j-phase between them and parameters of phases lattice. Metrological requirements for reference materials of composition and structure of heat resisting nickel and intermetallic alloys are formulated. The necessary and sufficient reference material set providing the possibility to determine the composition and structure parameters of single-crystal heat resisting nickel and intermetallic alloys is defined. The developed RM sets are certified as in-plant reference materials. Conclusion: The reference materials can be used for graduation of spectral equipment when conducting element analysis of specified class alloys; for calibration of means of measuring alloy structure parameters; for measurement of alloys phases lattice parameters; for structure reference pictures

Do Fitness Apps Need Text Reminders? An Experiment Testing Goal-Setting Text Message Reminders to Promote Self-Monitoring.

Science.gov (United States)

Liu, Shuang; Willoughby, Jessica F

2018-01-01

Fitness tracking apps have the potential to change unhealthy lifestyles, but users' lack of compliance is an issue. The current intervention examined the effectiveness of using goal-setting theory-based text message reminders to promote tracking activities on fitness apps. We conducted a 2-week experiment with pre- and post-tests with young adults (n = 50). Participants were randomly assigned to two groups-a goal-setting text message reminder group and a generic text message reminder group. Participants were asked to use a fitness tracking app to log physical activity and diet for the duration of the study. Participants who received goal-setting reminders logged significantly more physical activities than those who only received generic reminders. Further, participants who received goal-setting reminders liked the messages and showed significantly increased self-efficacy, awareness of personal goals, motivation, and intention to use the app. The study shows that incorporating goal-setting theory-based text message reminders can be useful to boost user compliance with self-monitoring fitness apps by reinforcing users' personal goals and enhancing cognitive factors associated with health behavior change.

Inverse methods for the mechanical characterization of materials at high strain rates

Directory of Open Access Journals (Sweden)

Casas-Rodriguez J.P.

2012-08-01

Full Text Available Mechanical material characterization represents a research challenge. Furthermore, special attention is directed to material characterization at high strain rates as the mechanical properties of some materials are influenced by the rate of loading. Diverse experimental techniques at high strain rates are available, such as the drop-test, the Taylor impact test or the Split Hopkinson pressure bar among others. However, the determination of the material parameters associated to a given mathematical constitutive model from the experimental data is a complex and indirect problem. This paper presents a material characterization methodology to determine the material parameters of a given material constitutive model from a given high strain rate experiment. The characterization methodology is based on an inverse technique in which an inverse problem is formulated and solved as an optimization procedure. The input of the optimization procedure is the characteristic signal from the high strain rate experiment. The output of the procedure is the optimum set of material parameters determined by fitting a numerical simulation to the high strain rate experimental signal.

Glass melter materials technical options for the French vitrification process and operations experience authors

International Nuclear Information System (INIS)

Bonniaud, R.; Roznad, L.; Demay, R.

1986-09-01

The French vitrification process for solidifying high-level radioactive waste which has been under industrial application since 1978, is mentioned briefly. This technique involves glass melting at 1,150 deg.C, using an induction heated metallic vessel. The molten glass pouring is controlled by a thermal gate, which is also heated by induction. Two types of vessel are in use. Both are remotely removable and disposable to permit replacement at regular intervals. The technical criteria (the materials used have to meet) are described. The behaviour of the materials has been investigated using the industrial experience gained in the AVM facility during 8 years of operation, as well as with operation of a prototype for the new vitrification facilities under construction at La Hague. A short description of the use of these materials is also presented

Palliative care for cancer patients in a primary health care setting:Bereaved relatives' experience, a qualitative group interview study

DEFF Research Database (Denmark)

Neergaard, Mette Asbjørn; Olesen, Frede; Jensen, Anders Bonde

2008-01-01

care setting to explore barriers and facilitators for delivery of good palliative home care. Methods: Three focus group interviews with fourteen bereaved relatives in Aarhus County, Denmark. Results: Three main categories of experience were identified: 1) The health professionals' management, where...

The Determination of the Optimal Material Proportion in Natural Fiber-Cement Composites Using Design of Mixture Experiments

OpenAIRE

Aramphongphun Chuckaphun; Ungtawondee Kampanart; Chaysuwan Duangrudee

2016-01-01

This research aims to determine the optimal material proportion in a natural fiber-cement composite as an alternative to an asbestos fibercement composite while the materials cost is minimized and the properties still comply with Thai Industrial Standard (TIS) for applications of profile sheet roof tiles. Two experimental sets were studied in this research. First, a three-component mixture of (i) virgin natural fiber, (ii) synthetic fiber and (iii) cement was studied while the proportion of c...

Materials International Space Station Experiment (MISSE) 5 Developed to Test Advanced Solar Cell Technology Aboard the ISS

Science.gov (United States)

Wilt, David M.

2004-01-01

The testing of new technologies aboard the International Space Station (ISS) is facilitated through the use of a passive experiment container, or PEC, developed at the NASA Langley Research Center. The PEC is an aluminum suitcase approximately 2 ft square and 5 in. thick. Inside the PEC are mounted Materials International Space Station Experiment (MISSE) plates that contain the test articles. The PEC is carried to the ISS aboard the space shuttle or a Russian resupply vehicle, where astronauts attach it to a handrail on the outer surface of the ISS and deploy the PEC, which is to say the suitcase is opened 180 deg. Typically, the PEC is left in this position for approximately 1 year, at which point astronauts close the PEC and it is returned to Earth. In the past, the PECs have contained passive experiments, principally designed to characterize the durability of materials subjected to the ultraviolet radiation and atomic oxygen present at the ISS orbit. The MISSE5 experiment is intended to characterize state-of-art (SOA) and beyond photovoltaic technologies.

Investing in organisational culture: nursing students' experience of organisational learning culture in aged care settings following a program of cultural development.

Science.gov (United States)

Grealish, Laurie; Henderson, Amanda

2016-10-01

Concerns around organisational learning culture limit nursing student placements in aged care settings to first year experiences. Determine the impact of an extended staff capacity building program on students' experiences of the organisational learning culture in the aged care setting. Pre and post-test design. A convenience sample of first, second and third year Bachelor of Nursing students attending placements at three residential aged care facilities completed the Clinical Learning Organisational Culture Survey. Responses between the group that attended placement before the program (n = 17/44; RR 38%) and the group that attended following the program (n = 33/72; RR 45%) were compared. Improvements were noted in the areas of recognition, accomplishment, and influence, with decreases in dissatisfaction. Organisational investment in building staff capacity can produce a positive learning culture. The aged care sector offers a rich learning experience for students when staff capacity to support learning is developed.

Are distribution coefficients measured from batch experiments meaningful for quantifying retention in compacted material?

Energy Technology Data Exchange (ETDEWEB)

Goutelard, F.; Charles, Y.; Page, J. [CEA/DEN/DPC/SECR/L3MR batiment 450, 91191 Gif sur Yvette (France)

2005-07-01

Full text of publication follows: To quantify the ability of a clayey material to act as a barrier for radionuclides migration, reliable data on retention properties must be available. The most common method for determining the distribution coefficient, quantifying the radionuclide adsorption, is the batch technique applied to powdered solid. Are these data meaningful for highly compacted minerals? This question is still under debate in literature [1,2]. The aim of the present study is to compare distribution coefficient (KD) value for Cs and Ni onto compacted and dispersed for both Bentonite MX80 and Callovo-Oxfordian clayey material in a simulated site water. Firstly, classical batch sorption experiments are carried on dispersed materials pre-conditioned with the simulated site water at pH 7.3. Radiotracer {sup 137}Cs and {sup 58}Ni are used to investigate the constant-pH isotherm sorption. The bottleneck for measuring distribution coefficient onto highly compacted material lies in a careful monitoring of chemical conditions because they are driven by diffusion processes. For this study, we have chosen to use in-diffusion experiments [3]. Sample size is optimized to reach for high retention level (300 mL/g) the steady state in a reasonable time (3 to 6 month). In order to describe the response surface of compacted distribution coefficient on bentonite MX80, a 2 variables Doehlert matrix has been chosen. In this experimental design, the two variables are density and dispersed distribution coefficient. Bentonite is pre-conditioning before compaction to a density ranging from 1.2 to 1.85 kg/l. The pellet is confined in a cylindrical stainless steel filter (150 {mu}L) closed to both ends. The cell is placed in a tightly closed bottle containing the working solution. After a re-equilibration period (at least 3 weeks), {sup 133}Cs and {sup 59}Ni stable isotope are introduced for monitoring the KD level (between 150 mL/g to 330 mL/g). Radiotracer {sup 137}Cs and {sup 58

Are distribution coefficients measured from batch experiments meaningful for quantifying retention in compacted material?

International Nuclear Information System (INIS)

Goutelard, F.; Charles, Y.; Page, J.

2005-01-01

Full text of publication follows: To quantify the ability of a clayey material to act as a barrier for radionuclides migration, reliable data on retention properties must be available. The most common method for determining the distribution coefficient, quantifying the radionuclide adsorption, is the batch technique applied to powdered solid. Are these data meaningful for highly compacted minerals? This question is still under debate in literature [1,2]. The aim of the present study is to compare distribution coefficient (KD) value for Cs and Ni onto compacted and dispersed for both Bentonite MX80 and Callovo-Oxfordian clayey material in a simulated site water. Firstly, classical batch sorption experiments are carried on dispersed materials pre-conditioned with the simulated site water at pH 7.3. Radiotracer 137 Cs and 58 Ni are used to investigate the constant-pH isotherm sorption. The bottleneck for measuring distribution coefficient onto highly compacted material lies in a careful monitoring of chemical conditions because they are driven by diffusion processes. For this study, we have chosen to use in-diffusion experiments [3]. Sample size is optimized to reach for high retention level (300 mL/g) the steady state in a reasonable time (3 to 6 month). In order to describe the response surface of compacted distribution coefficient on bentonite MX80, a 2 variables Doehlert matrix has been chosen. In this experimental design, the two variables are density and dispersed distribution coefficient. Bentonite is pre-conditioning before compaction to a density ranging from 1.2 to 1.85 kg/l. The pellet is confined in a cylindrical stainless steel filter (150 μL) closed to both ends. The cell is placed in a tightly closed bottle containing the working solution. After a re-equilibration period (at least 3 weeks), 133 Cs and 59 Ni stable isotope are introduced for monitoring the KD level (between 150 mL/g to 330 mL/g). Radiotracer 137 Cs and 58 Ni are used to quantify the

Small scale thermal violence experiments for combined insensitive high explosive and booster materials

Energy Technology Data Exchange (ETDEWEB)

Rae, Philip J [Los Alamos National Laboratory; Bauer, Clare L [AWE, UK; Stennett, C [DCMT SHRIVENHAM, UK; Flower, H M [AWE, UK

2010-01-01

A small scale cook-off experiment has been designed to provide a violence metric for both booster and IHE materials, singly and in combination. The experiment has a simple, axisymmetric geometry provided by a 10 mm internal diameter cylindrical steel confinement up to 80 mm in length. Heating is applied from one end of the sample length creating pseudo 1-D heating profile and a thermal gradient across the sample(s). At the opposite end of the confinement to the heating block, a machined groove provides a point of rupture that generates a cylindrical fragment. The displacement of the external face of the fragment is detected by Heterodyne Velocimetry. Proof of concept experiments are reported focusing on HMX and TATB formulations, and are described in relation to confinement, ullage and heating profile. The development of a violence metric, based upon fragment velocity records is discussed.

Vacuum System and Modeling for the Materials Plasma Exposure Experiment

International Nuclear Information System (INIS)

Lumsdaine, Arnold; Meitner, Steve; Graves, Van; Bradley, Craig; Stone, Chris

2017-01-01

Understanding the science of plasma-material interactions (PMI) is essential for the future development of fusion facilities. The design of divertors and first walls for the next generation of long-pulse fusion facilities, such as a Fusion Nuclear Science Facility (FNSF) or a DEMO, requires significant PMI research and development. In order to meet this need, a new linear plasma facility, the Materials Plasma Exposure Experiment (MPEX) is proposed, which will produce divertor relevant plasma conditions for these next generation facilities. The device will be capable of handling low activation irradiated samples and be able to remove and replace samples without breaking vacuum. A Target Exchange Chamber (TEC) which can be disconnected from the high field environment in order to perform in-situ diagnostics is planned for the facility as well. The vacuum system for MPEX must be carefully designed in order to meet the requirements of the different heating systems, and to provide conditions at the target similar to those expected in a divertor. An automated coupling-decoupling (“autocoupler”) system is designed to create a high vacuum seal, and will allow the TEC to be disconnected without breaking vacuum in either the TEC or the primary plasma materials interaction chamber. This autocoupler, which can be actuated remotely in the presence of the high magnetic fields, has been designed and prototyped, and shows robustness in a variety of conditions. The vacuum system has been modeled using a simplified finite element analysis, and indicates that the design goals for the pressures in key regions of the facility are achievable.

Spatial part-set cuing facilitation.

Science.gov (United States)

Kelley, Matthew R; Parasiuk, Yuri; Salgado-Benz, Jennifer; Crocco, Megan

2016-07-01

Cole, Reysen, and Kelley [2013. Part-set cuing facilitation for spatial information. Journal of Experimental Psychology: Learning, Memory, & Cognition, 39, 1615-1620] reported robust part-set cuing facilitation for spatial information using snap circuits (a colour-coded electronics kit designed for children to create rudimentary circuit boards). In contrast, Drinkwater, Dagnall, and Parker [2006. Effects of part-set cuing on experienced and novice chess players' reconstruction of a typical chess midgame position. Perceptual and Motor Skills, 102(3), 645-653] and Watkins, Schwartz, and Lane [1984. Does part-set cuing test for memory organization? Evidence from reconstructions of chess positions. Canadian Journal of Psychology/Revue Canadienne de Psychologie, 38(3), 498-503] showed no influence of part-set cuing for spatial information when using chess boards. One key difference between the two procedures was that the snap circuit stimuli were explicitly connected to one another, whereas chess pieces were not. Two experiments examined the effects of connection type (connected vs. unconnected) and cue type (cued vs. uncued) on memory for spatial information. Using chess boards (Experiment 1) and snap circuits (Experiment 2), part-set cuing facilitation only occurred when the stimuli were explicitly connected; there was no influence of cuing with unconnected stimuli. These results are potentially consistent with the retrieval strategy disruption hypothesis, as well as the two- and three-mechanism accounts of part-set cuing.

Materiality and Emotions in Making

Directory of Open Access Journals (Sweden)

Pirita Seitamaa-Hakkarainen

2013-10-01

Full Text Available Design practice involves multifaceted activities related to creative processes involving various design tools and material. In the present exploratory study, we investigated the feasibility of using contextual event sampling as a method of studying design activities, materiality and emotions in the making process. ‘Event sampling’ refers to a research strategy for studying ongoing daily experience and emotions as they occur in the ebb and flow of everyday life. A novel method (Contextual Activity Sampling System (CASS was implemented for recording and archiving design behavior. The data were collected using mobile-phone technology employing a CASS query along with a diary method. We report two case studies conducted using CASS query (set of questions that analyzed the socio-emotional experiences (i.e., challenges – competence involved in the process of designing and handling materials during the respective design projects. In the first case study, we were interested in the main aspects of professional designers’ work; resources they used, the social dimension as well as the emotional side of their work experiences. The purpose of the second case study was to examine, longitudinally, one textile artist’s ‘street art project’. The second case study is an example of autoethnographical research that uses CASS-query to document one’s own creative practice. We conclude that the CASS technology has the potential for design research as it captures time-based and multimodal data from designers. The present study also recognizes some limitations of data collection. Methodological implications regarding the contextual study of design practices and ideas of the tool development are discussed.Keywords: Design activity flow experience, event sampling, Contextual Activity Sampling System (CASS, feasibility

The experience and views of mental health nurses regarding nursing care delivery in an integrated, inpatient setting.

Science.gov (United States)

Cleary, Michelle; Walter, Garry; Hunt, Glenn

2005-06-01

Positive and effective consumer outcomes hinge on having in place optimal models of nursing care delivery. The aim of this study was to ascertain the experience and views of mental health nurses, working in hospitals in an area mental health service, regarding nursing care delivery in those settings. Surveys (n = 250) were sent to all mental health nurses working in inpatient settings and 118 (47%) were returned. Results showed that the quality of nursing care achieved high ratings (by 87%), and that two-thirds of respondents were proud to be a mental health nurse and would choose to be a mental health nurse again. Similarly, the majority (71%) would recommend mental health nursing to others. Concern was, however, expressed about the continuity and consistency of nursing work and information technology resources. Nurses with community experiences rated the importance of the following items, or their confidence, higher than those without previous community placements: the importance of interdisciplinary teamwork; the importance of participating in case review; the importance of collaborating with community staff; confidence in performing mental state examinations; and confidence in collaborating with community staff, suggesting that this placement had positive effects on acute care nursing.

A new instrumental set-up for polarized neutron scattering experiments

International Nuclear Information System (INIS)

Schmidt, Wolfgang; Ohl, Michael

2005-01-01

Neutron scattering with polarization analysis is a powerful tool to determine magnetic structures and excitations. A common setup is to mount the sample at the center of a Helmholtz-type coil which can provide a magnetic field of any direction at the sample position and also a guide field along the neutron flight paths around the sample. Recent experiments showed quite a high demand for measurements at low momentum transfers. For the corresponding low scattering angles air scattering gives rise to a very large background. For this reason we have extended the standard setup to a combination of a large vacuum tank surrounded by electrical coils. The vacuum tank eliminates the air scattering and we can use the polarization analysis down to the lowest accessible momentum transfers. The coils themselves also show some new features: In contrary to the classic (symmetric) coil distribution we use an asymmetric setup which gives the advantage of a larger scattering window. Due to a more sophisticated current distribution this modified coil arrangement needs not to be rotated for different scattering conditions. The whole set-up will soon be available at IN12, a cold neutrons three-axis spectrometer operated by FZ Juelich in collaboration with CEA Grenoble as a CRG-B instrument at the Institut Laue Langevin in Grenoble

Crack path predictions and experiments in plane structures considering anisotropic properties and material interfaces

Directory of Open Access Journals (Sweden)

P.O. Judt

2015-10-01

Full Text Available In many engineering applications special requirements are directed to a material's fracture behavior and the prediction of crack paths. Especially if the material exhibits anisotropic elastic properties or fracture toughnesses, e.g. in textured or composite materials, the simulation of crack paths is challenging. Here, the application of path independent interaction integrals (I-integrals, J-, L- and M-integrals is beneficial for an accurate crack tip loading analysis. Numerical tools for the calculation of loading quantities using these path-invariant integrals are implemented into the commercial finite element (FE-code ABAQUS. Global approaches of the integrals are convenient considering crack tips approaching other crack faces, internal boundaries or material interfaces. Curved crack faces require special treatment with respect to integration contours. Numerical crack paths are predicted based on FE calculations of the boundary value problem in connection with an intelligent adaptive re-meshing algorithm. Considering fracture toughness anisotropy and accounting for inelastic effects due to small plastic zones in the crack tip region, the numerically predicted crack paths of different types of specimens with material interfaces and internal boundaries are compared to subcritically grown paths obtained from experiments.

New Experiences in Dike Construction with Soil-Ash Composites and Fine-Grained Dredged Materials

Directory of Open Access Journals (Sweden)

Duszyński Remigiusz

2017-12-01

Full Text Available The supporting structure inside a coastal dike is often made of dredged non-uniform sand with good compaction properties. Due to the shortage of natural construction material for both coastal and river dikes and the surplus of different processed materials, new experiments were made with sand-ash mixtures and fine-grained dredged materials to replace both dike core and dike cover materials resulting in economical, environmentally friendly and sustainable dikes. Ash from EC Gdańsk and dredged sand from the Vistula river were mixed to form an engineering material used for dike construction. The optimum sand-ash composites were applied at a field test site to build a large-scale research dike. Fine-grained dredged materials from Germany were chosen to be applied in a second full-scale research dike in Rostock. All materials were investigated according to the standards for soil mechanical analysis. This includes basic soil properties, mechanical characteristics, such as grain-size distribution, compaction parameters, compressibility, shear strength, and water permeability. In the field, the infiltration of water into the dike body as well as the erosion resistance of the cover material against overflowing water was determined. Results of both laboratory and field testing are discussed in this paper. In conclusion, the mixing of bottom ash with mineral soil, such as relatively uniform dredged sand, fairly improves the geotechnical parameters of the composite, compared to the constituents. Depending on the composite, the materials may be suitable to build a dike core or an erosion-resistant dike cover.

New Experiences in Dike Construction with Soil-Ash Composites and Fine-Grained Dredged Materials

Science.gov (United States)

Duszyński, Remigiusz; Duszyńska, Angelika; Cantré, Stefan

2017-12-01

The supporting structure inside a coastal dike is often made of dredged non-uniform sand with good compaction properties. Due to the shortage of natural construction material for both coastal and river dikes and the surplus of different processed materials, new experiments were made with sand-ash mixtures and fine-grained dredged materials to replace both dike core and dike cover materials resulting in economical, environmentally friendly and sustainable dikes. Ash from EC Gdańsk and dredged sand from the Vistula river were mixed to form an engineering material used for dike construction. The optimum sand-ash composites were applied at a field test site to build a large-scale research dike. Fine-grained dredged materials from Germany were chosen to be applied in a second full-scale research dike in Rostock. All materials were investigated according to the standards for soil mechanical analysis. This includes basic soil properties, mechanical characteristics, such as grain-size distribution, compaction parameters, compressibility, shear strength, and water permeability. In the field, the infiltration of water into the dike body as well as the erosion resistance of the cover material against overflowing water was determined. Results of both laboratory and field testing are discussed in this paper. In conclusion, the mixing of bottom ash with mineral soil, such as relatively uniform dredged sand, fairly improves the geotechnical parameters of the composite, compared to the constituents. Depending on the composite, the materials may be suitable to build a dike core or an erosion-resistant dike cover.

Model for movement of molten limiter material during the ISX-B beryllium limiter experiment

International Nuclear Information System (INIS)

Langley, R.A.; England, A.C.; Edmonds, P.H.; Hogan, J.T.; Neilson, G.H.

1986-01-01

A model is proposed for the movement and erosion of limiter material during the Beryllium Limiter Experiment performed on the ISX-B Tokamak. This model is consistent with observed experimental results and plasma operational characteristics. Conclusions drawn from the model can provide an understanding of erosion mechanisms, thereby contributing to the development of future design criteria. (author)

Experiments on container materials for Swiss high-level waste disposal projects. Part 2

International Nuclear Information System (INIS)

Simpson, J.P.

1984-12-01

The present concept for final disposal of high-level waste in Switzerland consists of a repository at a depth of 1000 to 1500 m in the crystalline bedrock of northern Switzerland. The waste will be placed in a container which is required to function as a high integrity barrier for at least 1000 years. This report is the second of a set of two dealing with the evaluation of potential materials for such containers. Four materials were identified for further evaluation in the first of these reports; they were cast steel, nodular cast iron, copper and Ti-Code 12. It was concluded that some testing was needed, in particular with respect to corrosion, in order to confirm these materials as candidate container materials. The experimental programme included: 1) corrosion tests on copper under gamma radiation; 2) immersion corrosion tests on the four candidate materials including welded specimens; 3) corrosion testing of the four materials in saturated bentonite; 4) constant strain rate testing of Ti-Code 12 and copper at 80 degrees C; 5) the behaviour of copper, Ti-Code 12 and Zircaloy-2 when immersed in liquid lead; 6) corrosion potential and galvanic current measurements on several material pairs. The standard test medium was natural mineral water from the Bad Saeckingen source. This water has a total dissolved solids content of approx. 3200 mg/l, about 1600 mg/l as chloride. The oxygen level was defined as 0.1 μg/g. In certain cases this medium was modified in order to test under more severe conditions. The results of the corrosion tests confirm in general the evaluation in the first part of the report. All of the materials are suitable for high-level waste containers: cast steel, nodular cast iron and copper as single layer containers, and Ti-Code 12 as an outer corrosion resistant layer. Copper could also be used under an outer steel layer, where it could arrest local penetration

Electronic Materials Science

Science.gov (United States)

Irene, Eugene A.

2005-02-01

A thorough introduction to fundamental principles and applications From its beginnings in metallurgy and ceramics, materials science now encompasses such high- tech fields as microelectronics, polymers, biomaterials, and nanotechnology. Electronic Materials Science presents the fundamentals of the subject in a detailed fashion for a multidisciplinary audience. Offering a higher-level treatment than an undergraduate textbook provides, this text benefits students and practitioners not only in electronics and optical materials science, but also in additional cutting-edge fields like polymers and biomaterials. Readers with a basic understanding of physical chemistry or physics will appreciate the text's sophisticated presentation of today's materials science. Instructive derivations of important formulae, usually omitted in an introductory text, are included here. This feature offers a useful glimpse into the foundations of how the discipline understands such topics as defects, phase equilibria, and mechanical properties. Additionally, concepts such as reciprocal space, electron energy band theory, and thermodynamics enter the discussion earlier and in a more robust fashion than in other texts. Electronic Materials Science also features: An orientation towards industry and academia drawn from the author's experience in both arenas Information on applications in semiconductors, optoelectronics, photocells, and nanoelectronics Problem sets and important references throughout Flexibility for various pedagogical needs Treating the subject with more depth than any other introductory text, Electronic Materials Science prepares graduate and upper-level undergraduate students for advanced topics in the discipline and gives scientists in associated disciplines a clear review of the field and its leading technologies.

Articulating Material Criteria

DEFF Research Database (Denmark)

Hasling, Karen Marie

2013-01-01

This paper discusses the experiences and potentials with materials teaching at the Institute for Product Design at Kolding School of Design, using materials teaching as experiments in my PhD project. The project intents to create a stronger material awareness among product design students...... with emphasis on sustainability. The experiments aim to develop an understanding of, how product design students include materials in their design practice and how tools can be developed that further enhance this. Hence experiments are essential for the progress of the PhD project as they help to observe....... Furthermore the purpose is to initiate a discussion on, how to create educational tools for material awareness creation in the design education e.g. by applying objective and quantitative methods in an otherwise often subjective design process....

30 CFR 56.19106 - Shaft sets.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Shaft sets. 56.19106 Section 56.19106 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND... Shaft sets. Shaft sets shall be kept in good repair and clean of hazardous material. ...

Field Experience Study in a Traditional Setting.

Science.gov (United States)

Perenich, Theresa A.

1978-01-01

A field experience in fashion marketing for Kansas State University students is described. The functions and responsibilities of the coordinator, the student, and the departmental supervisor are outlined, along with the evaluation processes used. (Author/LBH)

Corrosion experiments on stainless steels used in dry storage canisters of spent nuclear fuel

Energy Technology Data Exchange (ETDEWEB)

Ryskamp, J.M.; Adams, J.P.; Faw, E.M.; Anderson, P.A.

1996-09-01

Nonradioactive (cold) experiments have been set up in the Idaho Chemical Processing Plant (ICPP)-1634, and radioactive (hot) experiments have been set up in the Irradiated Fuel Storage Facility (IFSF) at ICPP. The objective of these experiments is to provide information on the interactions (corrosion) between the spent nuclear fuel currently stored at the ICPP and the dry storage canisters and containment materials in which this spent fuel will be stored for the next several decades. This information will be used to help select canister materials that will retain structural integrity over this period within economic, criticality, and other constraints. The two purposes for Dual Purpose Canisters (DPCs) are for interim storage of spent nuclear fuel and for shipment to a final geological repository. Information on how corrosion products, sediments, and degraded spent nuclear fuel may corrode DPCs will be required before the DPCs will be allowed to be shipped out of the State of Idaho. The information will also be required by the Nuclear Regulatory Commission (NRC) to support the licensing of DPCs. Stainless steels 304L and 316L are the most likely materials for dry interim storage canisters. Welded stainless steel coupons are used to represent the canisters in both hot and cold experiments.

Corrosion experiments on stainless steels used in dry storage canisters of spent nuclear fuel

International Nuclear Information System (INIS)

Ryskamp, J.M.; Adams, J.P.; Faw, E.M.; Anderson, P.A.

1996-09-01

Nonradioactive (cold) experiments have been set up in the Idaho Chemical Processing Plant (ICPP)-1634, and radioactive (hot) experiments have been set up in the Irradiated Fuel Storage Facility (IFSF) at ICPP. The objective of these experiments is to provide information on the interactions (corrosion) between the spent nuclear fuel currently stored at the ICPP and the dry storage canisters and containment materials in which this spent fuel will be stored for the next several decades. This information will be used to help select canister materials that will retain structural integrity over this period within economic, criticality, and other constraints. The two purposes for Dual Purpose Canisters (DPCs) are for interim storage of spent nuclear fuel and for shipment to a final geological repository. Information on how corrosion products, sediments, and degraded spent nuclear fuel may corrode DPCs will be required before the DPCs will be allowed to be shipped out of the State of Idaho. The information will also be required by the Nuclear Regulatory Commission (NRC) to support the licensing of DPCs. Stainless steels 304L and 316L are the most likely materials for dry interim storage canisters. Welded stainless steel coupons are used to represent the canisters in both hot and cold experiments

The behavior of self-compacting concrete containing micro-encapsulated phase change materials

NARCIS (Netherlands)

Hunger, Martin; Entrop, Alexis Gerardus; Mandilaras, I.; Brouwers, Jos; Founti, M.

2009-01-01

In order to come to a sustainable built environment the construction industry requires new energy saving concepts. One concept is to use Phase Change Materials (PCM), which have the ability to absorb and to release thermal energy at a specific temperature. This paper presents a set of experiments

The behavior of self-compacting concrete containing micro-encapsulated Phase Change Materials

NARCIS (Netherlands)

Hunger, M.; Entrop, A.G.; Mandilaras, I.; Brouwers, H.J.H.; Founti, M.

2009-01-01

In order to come to a sustainable built environment the construction industry requires new energy saving concepts. One concept is to use Phase Change Materials (PCM), which have the ability to absorb and to release thermal energy at a specific temperature. This paper presents a set of experiments

Experience gained with Euratom's nuclear materials accounting and reporting system

International Nuclear Information System (INIS)

Schmitt, M.; Kschwendt, H.; Maxwell, A.G.; Littlejohn, M.

1979-01-01

The entry into force of the Verification Agreement in early 1977, linked to the wish to update the old Euratom System created in 1959, required that a new Euratom system (Community Regulation) be established. The main aspects of this new system, together with the practical experience gained in one and a half years operation, are presented. Certain basic accounting principles incorporated in the Euratom system, which are somewhat different from IAEA principles, are discussed in detail. This includes the notion of accounting date, some correction procedure aspects as well as the continuous updating of the book inventory to the physical reality in form of inventory changes. The effect of these differences when comparing IAEA and Euratom data is also mentioned. Furthermore, certain of the verifications carried out routinely on the operator's reports as well as on the reports submitted by Euratom to IAEA, are described and quantifications are given. Some mention is also made of areas where Euratom's role goes beyond that of the IAEA, i.e. the reporting implications of accounting for material by origin and control of particular use of the materials as well as verification of ore production and processing activities. Finally, improvements and simplifications concerning reports to the IAEA are proposed. (author)

Development of zirconium hydride highly effective moderator materials

International Nuclear Information System (INIS)

Yin Changgeng

2005-10-01

The zirconium hydride with highly content of hydrogen and low density is new efficient moderator material for space nuclear power reactor. Russia has researched it to use as new highly moderator and radiation protection materials. Japanese has located it between the top of pressure vessel and the main protection as a shelter, the work temperature is rach to 220 degree C. The zirconium hydride moderator blocks are main parts of space nuclear power reactor. Development of zirconium hydride moderator materials have strength research and apply value. Nuclear Power Research and Design Instituteoh China (NPIC) has sep up the hydrogenation device and inspect systems, and accumurate a large of experience about zirconium hydride, also set up a strict system of QA and QC. (authors)

Impact of Vicarious Learning Experiences and Goal Setting on Preservice Teachers' Self-Efficacy for Technology Integration: A Pilot Study.

Science.gov (United States)

Wang, Ling; Ertmer, Peggy A.

This pilot study was designed to explore how vicarious learning experiences and goal setting influence preservice teachers' self-efficacy for integrating technology into the classroom. Twenty undergraduate students who were enrolled in an introductory educational technology course at a large midwestern university participated and were assigned…

KEEFEKTIFAN PEMBELAJARAN BENCANA ALAM BERVISI SETS TERINTEGRASI DALAM IPA DENGAN MEDIA ANIMASI DAN LEMBAR PERTANYAAN

Directory of Open Access Journals (Sweden)

F. Ferawati*

2012-07-01

Full Text Available Penelitian ini bertujuan untuk menentukan keefektifan pembelajaran bencana alam banjir bervisi SETS terintegrasi dalam materi IPA pokok bahasan Perubahan Lingkungan Fisik dengan media animasi dan lembar pertanyaan sebagai solusi alternatif mengatasi rendahnya pemahaman masyarakat terhadap bencana alam banjir melalui pembelajaran formal sejak dini. Desain penelitian ini adalah penelitian eksperimen Pretest-Posttest Control Group Design dengan objek siswa kelas IV SD Tahun Ajaran 2010/2011. Hasil belajar siswa pada materi IPA, bencana alam banjir dan ketuntasan belajar dianalisis dengan uji signifikansi gain. Hasil analisis data menunjukkan siswa yang dikenai pembelajaran bencana alam banjir bervisi SETS terintegrasi dalam materi IPA dengan media animasi dan lembar pertanyaan lebih baik daripada siswa yang dikenai pembelajaran bencana alam banjir bervisi SETS terintegrasi dalam materi IPA dengan media LKS dan pertanyaan mandiri. Dengan demikian dapat disimpulkan bahwa pembelajaran bencana alam banjir bervisi SETS yang terintegrasi dalam materi IPA pokok bahasan Perubahan Lingkungan Fisik dengan media animasi dan lembar pertanyaan lebih efektif dalam meningkatkan pemahaman konsep bencana alam dan IPA.This study aims to determine the effectiveness of flood natural disasters learning based on SETS vision integrated to Science subject: Physical Environment Changes applying animation media and the question sheet as an alternative solution to overcome the lack of earlier understanding of society to flood natural disasters. Experimental research design: Control Group Pretest-posttest was used with fourth grade students of elementary school of Bandarharjo 02 academic year 2010/2011 used as the research object. Students’ learning outcomes of science: flood natural disasters topic and students’ achievement were analysed through the use of significance gain test. The results of the analysis of experimental data showed the experiment class

Elastic and inelastic electrons in the double-slit experiment: A variant of Feynman's which-way set-up

Energy Technology Data Exchange (ETDEWEB)

Frabboni, Stefano [Department FIM, University of Modena and Reggio Emilia, Via G. Campi 213/a, 41125 Modena (Italy); CNR-Institute of Nanoscience-S3, Via G. Campi 213/a, 41125 Modena (Italy); Gazzadi, Gian Carlo [CNR-Institute of Nanoscience-S3, Via G. Campi 213/a, 41125 Modena (Italy); Grillo, Vincenzo [CNR-Institute of Nanoscience-S3, Via G. Campi 213/a, 41125 Modena (Italy); CNR-IMEM, Parco delle Scienze 37a, 43100 Parma (Italy); Pozzi, Giulio [Department of Physics and Astronomy, University of Bologna, Viale B. Pichat 6/2, 40127 Bologna (Italy)

2015-07-15

Modern nanotechnology tools allowed us to prepare slits of 90 nm width and 450 nm spacing in a screen almost completely opaque to 200 keV electrons. Then by covering both slits with a layer of amorphous material and carrying out the experiment in a conventional transmission electron microscope equipped with an energy filter we can demonstrate that the diffraction pattern, taken by selecting the elastically scattered electrons, shows the presence of interference fringes, but with a bimodal envelope which can be accounted for by taking into account the non-constant thickness of the deposited layer. However, the intensity of the inelastically scattered electrons in the diffraction plane is very broad and at the limit of detectability. Therefore the experiment was repeated using an aluminum film and a microscope also equipped with a Schottky field emission gun. It was thus possible to observe also the image due to the inelastically scattered electron, which does not show interference phenomena both in the Fraunhofer or Fresnel regimes. If we assume that inelastic scattering through the thin layer covering the slits provides the dissipative process of interaction responsible for the localization mechanism, then these experiments can be considered a variant of the Feynman which-way thought experiment. - Highlights: • Fabrication by focused ion beam and electron beam induced deposition of two slits covered by electron transparent materials. • Two slits interference experiment with elastic and inelastic electrons. • Analysis of Fraunhofer and Fresnel images of the two slits formed with elastic and inelastic (plasmon loss) electrons.

Material Evidence for Ocean Impact from Shock-Metamorphic Experiments

Science.gov (United States)

Miura, Y.; Takayama, K.; Iancu, O. G.

1993-07-01

Continental impact reveals an excavated crater that has few fresh fine ejecta showing major high shock metamorphism due to weathering [1]. A giant ocean impact rarely remains as an excavated crater mainly due to crushing by dynamic plate-tectonic movements on the crust [2]. However, all impact materials, including fine-grained ejecta, can be obtained with artificial impact experiments [3]. The purpose of this study is to discuss material evidence for ocean impact based on shock-metamorphic experiments. Artificial impact experiments indicate that fine shocked quartz (SQ) aggregates can be formed on several target rocks (Table 1) [1]. It is found in Table 1 that (1) the largest-density deviation of SQ grain is found not at the wall-rock or the impact crater but at fine-grained ejecta, and (2) silica-poor rocks of basalt, gabbro, and anorthosite can also make fine SQ aggregates by impact. Table 1, which appears here in the hard copy, shows formations of fine shocked quartz aggregates from ocean-floor rocks of basalt, gabbroic anorthosite, and granite [3]. An asteroid (about 10 km across) hits the Earth ~65 m.y. ago [4] to result in global catastrophe by titanic explosion and climate change. But shocked quartz grains found in the K/T boundary layer were considered to come from crystalline continental rocks [5]. The present result as listed in Table 1 indicates that fine SQ aggregates can also be formed at sea-floor basaltic and gabbroic rocks [3]. The present result of formation of the SQ grains from sea- floor target rocks is nearly consistent with the finding of a sea-impact crater at the K/T boundary near the Caribbean [6]. Impact-induced volcanism at the K/T boundary can explained by the penetration from thin ocean crust to upper mantle reservoirs, if giant impact of a 10-km- diameter asteroid hit the ocean [2,7]. The present result can explain "phreatomagmatic (magmatic vapor) explosion," which is created by abrupt boiling between high-temperature magma and cold

Developing antitobacco mass media campaign messages in a low-resource setting: experience from the Kingdom of Tonga.

Science.gov (United States)

Sugden, C; Phongsavan, P; Gloede, S; Filiai, S; Tongamana, V O

2017-05-01

Tobacco use has become the leading cause of preventable death in Tonga, a small island nation in the South Pacific. One pragmatic and economical strategy to address this worrying trend is to adapt effective antitobacco mass media materials developed in high-income countries for local audiences. Using Tonga as an example, this paper shares the practical steps involved in adapting antitobacco campaign materials for local audiences with minimal resources, a limited budget and without the need for an external production team. The Tongan experience underscores the importance of an adaptation process that draws from evidence-based best-practice models and engages local and regional stakeholders to ensure that campaign materials are tailored to the local context and are embedded within a mix of antitobacco strategies. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

30 CFR 57.19106 - Shaft sets.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Shaft sets. 57.19106 Section 57.19106 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND....19106 Shaft sets. Shaft sets shall be kept in good repair and clean of hazardous material. ...

Materials degradation in fission reactors: Lessons learned of relevance to fusion reactor systems

International Nuclear Information System (INIS)

Was, Gary S.

2007-01-01

The management of materials in power reactor systems has become a critically important activity in assuring the safe, reliable and economical operation of these facilities. Over the years, the commercial nuclear power reactor industry has faced numerous 'surprises' and unexpected occurrences in materials. Mitigation strategies have sometimes solved one problem at the expense of creating another. Other problems have been solved successfully and have motivated the development of techniques to foresee problems before they occur. This paper focuses on three aspects of fission reactor experience that may benefit future fusion systems. The first is identification of parameters and processes that have had a large impact on the behavior of materials in fission systems such as temperature, dose rate, surface condition, gradients, metallurgical variability and effects of the environment. The second is the development of materials performance and failure models to provide a basis for assuring component integrity. Last is the development of proactive materials management programs that identify and pre-empt degradation processes before they can become problems. These aspects of LWR experience along with the growing experience with materials in the more demanding advanced fission reactor systems form the basis for a set of 'lessons learned' to aid in the successful management of materials in fusion reactor systems

Experience in safeguarding nuclear material at the Rheinsberg nuclear power station

International Nuclear Information System (INIS)

Winkler, R.

1976-01-01

The three years' experience that has been gained in application of the Safeguards Agreement shows that the carrying out of inspections at the nuclear power plant has virtually no effect on operating conditions. In future it will be possible to reduce this effect even further and still maintain the operational reliability of the station. Verification of the transfer of nuclear material and detection of possible violations have proved relatively simple. The labour requirement of each unit at the station for the performance of inspections is not more that thirty man-days. Constructive collaboration between power station staff and inspectors is of great importance in improving the safeguards procedures. (author)

Combining computation and experiment to accelerate the discovery of new hydrogen storage materials

Science.gov (United States)

Siegel, Donald

2009-03-01

The potential of emerging technologies such as fuel cells (FCs) and photovoltaics for environmentally-benign power generation has sparked renewed interest in the development of novel materials for high density energy storage. For applications in the transportation sector, the demands placed upon energy storage media are especially stringent, as a potential replacement for fossil-fuel-powered internal combustion engines -- namely, the proton exchange membrane FC -- utilizes hydrogen as a fuel. Although hydrogen has about three times the energy density of gasoline by weight, its volumetric energy density (even at 700 bar) is roughly a factor of six smaller. Consequently, the safe and efficient storage of hydrogen has been identified as one of the key materials-based challenges to realizing a transition to FC vehicles. This talk will present an overview of recent efforts at Ford aimed at developing new materials for reversible, solid state hydrogen storage. A tight coupling between first-principles modeling and experiments has greatly accelerated our efforts, and several examples illustrating the benefits of this approach will be presented.

Practical experience with nuclear material control and accountancy in a large reprocessing plant

International Nuclear Information System (INIS)

Lebaillif, D.; Mitterrand, B.; Rincel, X.; Regnier, J.

1999-01-01

This paper describes the system implemented in UP3 and provides the results of the 9-year operation experience. It will be insisted on the necessity to perform measurements as accurately as possible in order to have an effective system. The Nuclear Material Control and Accountancy implemented at La Hague has proven to be an effective and efficient tool for the management of the facility. In particular it has been shown the necessity to determine as accurately as possible every transfer of nuclear material (NM) out or into the facility of area of the facility, whatever is considered, in order to establish the best possible balance of NM. A computerized system permits accurate and timely data collection, following up of throughputs and inventories, establishment of reports and records requested by national and international authorities [ru

Fabrication of 1m x 1m readout strips panel and quality verification of new set of SFS dielectric material

International Nuclear Information System (INIS)

Kumar, A.; Pandey, A.; Sogarwal, Hariom; Marimuthu, N.; Singh, V.; Subrahmanyam, V.S.

2016-01-01

India based Neutrino Observatory (INO) is going to use ∼ 30,000 Resistive Plate Chamber (RPC) as an active detector. Resistive Plate chambers are parallel plate fast gaseous detector made up of high resistivity (10"1"2 ohm) of glass or bakelite. Glass plates work as electrodes of positive and negative potential. When a charged particle passes through chamber it ionizes the gas and charge move towards opposite electrodes. The pick-up panels pick these signals. Signals are sent to front end electronics. The characteristic impedance of the strips of the panels should be matched with front end electronics which helps in minimizing the reflected signal. Since INO is an underground laboratory, all material used in it must be fireproof. Since ∼ 60,000 pick-up panels are going to be used in INO hence it should be cheaper also. We recently received a new set of Silicon Fiber Sheets - a dielectric material, of 25 pieces of 1m x 0.5m having thickness 05 mm. We fabricated a set of readout strips panel of dimension 1m x 1m. We will present this work in detail

The Experience and Effectiveness of Nurse Practitioners in Orthopaedic Settings: A Comprehensive Systematic Review.

Science.gov (United States)

Taylor, Anita; Staruchowicz, Lynda

This review asks "What is the experience and effectiveness of nurse practitioners in orthopaedic settings"?The objective of the quantitative component of this review is to synthesise the best available evidence on effectiveness of orthopaedic nurse practitioner specific care on patient outcomes and process indicators.The objective of the qualitative component of this review is to synthesise the best available evidence on the experience of becoming or being an orthopaedic nurse practitioner in relation to role development, role implementation and (ongoing) role evaluation.The objective of the text and opinion component of this review is to synthesise the best available evidence of the contemporary discourse on the effectiveness and experience of nurse practitioners in orthopaedic settings. Nurse practitioner roles have emerged in response to areas of unmet healthcare needs in a variety of settings. Nurse practitioners first evolved in the United States 40 years ago in response to a shortage of primary health care physicians. Nurse practitioners filled the void by providing access to primary health care services where otherwise there was none. Nurse practitioners comprise one branch of advanced nursing practice in the US along with Nurse Anaesthetists (NA), Clinical Nurse Specialists (CNS) and Nurse Midwives (NM). Canada soon followed America's lead by establishing the nurse practitioner role in 1967. Canada has two areas of advanced nursing practice, namely nurse practitioner and clinical nurse specialist; they are moving towards introducing nurse anaesthetists currently. The nurse practitioner role was introduced into the United Kingdom 20 years ago.There is commonality amongst the definition and characteristics of Nurse Practitioner (NP)/Advanced Practice Nurse (APN) role and practice internationally in terms of education, practice standards and regulation; operationally there is variability however. Australia's progress with nurse practitioners is very much

Pulling an intruder from a granular material: a novel depinning experiment

Directory of Open Access Journals (Sweden)

Zhang Yue

2017-01-01

Full Text Available Two-dimensional impact experiments by Clark et al. [2] identified the source of inertial drag to be caused by ‘collisions’ with a latent force network, leading to large fluctuations of the force experienced by the impactor. These collisions provided the major drag on an impacting intruder until the intruder was nearly at rest. As a complement, we consider controlled pull-out experiments where a buried intruder is pulled out of a material, starting from rest. This provides a means to better understand the non-inertial part of the drag force, and to explore the mechanisms associated with the force fluctuations. To some extent, the pull out process is a time reversed version of the impact process. In order to visualize this pulling process, we use 2D photoelastic disks from which circular intruders of different radii are pulled out. We present results about the dynamics of the intruder and the structures of the force chains inside the granular system as captured by slow and high speed imaging.

Performance enhancement of hermetic compressor using phase change materials

Science.gov (United States)

Mahmoud, I. M.; Rady, M. A.; Huzayyin, A. S.

2015-08-01

The present study is motivated by the need for the research of simple measures for increasing energy efficiency of hermetic compressor. The measure is the application of phase change materials for performance enhancement. The first experimental study should be guide for choice of PCM. It has been performed to investigate the effects of thermostat setting temperature on the performance of hermetic compressor. The effects of thermostat setting temperature with and without load on power consumption have been analyzed. Performance enhancement using phase change materials (PCMs) has been studied by employing a phase change material Rubitherm-42 (RT-42) on the top surface of compressor. Choice of PCM material is based on basic compressor performance measured in the first part of the present study. Experiments have been carried out for different load values and different quantities of PCM. The quantity and phase change characteristic of PCM are essential parameters that determine the percentage of performance enhancement in term of energy consumption. Reduction of energy consumption of about 10% has been achieved in the present study by using PCM. The present study shows that how to reduce the electrical power consumption to enhance compressor heat dissipation method to improve efficiency.

Ground-based simulation of telepresence for materials science experiments. [remote viewing and control of processes aboard Space Station

Science.gov (United States)

Johnston, James C.; Rosenthal, Bruce N.; Bonner, Mary JO; Hahn, Richard C.; Herbach, Bruce

1989-01-01

A series of ground-based telepresence experiments have been performed to determine the minimum video frame rate and resolution required for the successive performance of materials science experiments in space. The approach used is to simulate transmission between earth and space station with transmission between laboratories on earth. The experiments include isothermal dendrite growth, physical vapor transport, and glass melting. Modifications of existing apparatus, software developed, and the establishment of an inhouse network are reviewed.

Traffic model for commercial payloads in the Materials Experiment Assembly (MEA). [market research in commercial space processing

Science.gov (United States)

Tietzel, F. A.

1979-01-01

One hundred individuals representing universities, technical institutes, government agencies, and industrial facilities were surveyed to determine potential commercial use of a self-contained, automated assembly for the space processing of materials during frequent shuttle flights for the 1981 to 1987 period. The approach used and the results of the study are summarized. A time time-phased projection (traffic model) of commercial usage of the materials experiment assembly is provided.

Modeling a High Explosive Cylinder Experiment

Science.gov (United States)

Zocher, Marvin A.

2017-06-01

Cylindrical assemblies constructed from high explosives encased in an inert confining material are often used in experiments aimed at calibrating and validating continuum level models for the so-called equation of state (constitutive model for the spherical part of the Cauchy tensor). Such is the case in the work to be discussed here. In particular, work will be described involving the modeling of a series of experiments involving PBX-9501 encased in a copper cylinder. The objective of the work is to test and perhaps refine a set of phenomenological parameters for the Wescott-Stewart-Davis reactive burn model. The focus of this talk will be on modeling the experiments, which turned out to be non-trivial. The modeling is conducted using ALE methodology.

Extended liner performance for hydrodynamics and material properties experiments

CERN Document Server

Reinovsky, R E

2001-01-01

Summary form only given, as follows. Over the last few years a new application for high performance pulsed power, the production of high energy density environments for the study of material properties under extreme conditions and hydrodynamics in complex geometries has joined the traditional family of radiation source applications. The newly commissioned Atlas pulsed power system at Los Alamos has replaced its predecessor, Pegasus, and joined the Shiva Star system at AFRL, Albuquerque and a variety of flux compression systems, principally at the All Russian Scientific Research Institute of Experimental Physics (VNIIEF) as ultra high current drivers for the high precision, magnetically imploded, near-solid density liner that is used to create the needed environments. Three families of experiments: the production of ultra strong shocks (>10 Mbar), the production of strongly coupled plasmas by liner compression of an initially dense plasma of a few eV temperature, and the compression of a magnetized plasma for ...

Effects of Suicide Awareness Material on Implicit Suicide Cognition: A Laboratory Experiment.

Science.gov (United States)

Arendt, Florian; Till, Benedikt; Niederkrotenthaler, Thomas

2016-01-01

In spite of the increasing adoption of suicide awareness campaigns to prevent suicide, little is known about the effective construction of awareness messages used and on their impact on suicidal cognition. We hypothesized that media reporting on an individual overcoming a suicidal crisis increases the automatic association between "life" and self. University students (N = 112) were randomly allocated to one of three groups in a laboratory experiment. Participants allocated to treatment group 1 or group 2 read awareness material about a person coping with suicidal ideation by getting professional help. The only difference between the two groups was the amount of social similarity (low vs. high) between the protagonist and the participants. The control group read an article unrelated to suicide. Awareness material increased implicit cognition in terms of a strengthening of self-life associations. This effect was restricted to participants scoring low on wishful identification with the suicidal protagonist. This finding suggests that only individuals who do not wishfully identify with a protagonist going through difficult life circumstances benefit from the awareness material in terms of suicidal cognition. These findings provide a rich basis for further research and have potentially high relevance to the construction of suicide-awareness messages.

The use of radioactive materials in German schools. Obstacles and chances

International Nuclear Information System (INIS)

Vahlbruch, Jan-Willem

2015-01-01

The basics for the understanding of radioactivity and radioprotection are set in the secondary school. Therefore the German-Swiss Radiation Protection Association already is trying to support the appropriate teaching of relevant topics in school for a long time. Unfortunately experiments with radioactive material are hampered in Germany by complex and confusing legislation. In this contribution the framework is described which is given by the German legislation for the use of radioactive sources in secondary schools. Additionally proposals for different simple experiments with radioactivity are presented which can be easily implemented in teaching and alternative methods are introduced like e.g. virtual experiments.

A Set of English Instructional Materials Using Task-Based Learning for News Production Management Study Program in STMM “MMMTC” Yogyakarta

Directory of Open Access Journals (Sweden)

Geovanna Gistha Wicita

2016-12-01

Full Text Available The News Production Management Study Program (NPMSP in STMM “MMTC” Yogyakarta is a study program that has an English subject in the third semester. Due to the lack of time and materials for the students, English, which they will use a lot in journalism, becomes their barrier in learning. Therefore, this research attempted to develop a set of English instructional materials using task-based learning for the third semester students of the NPMSP STMM “MMTC” Yogyakarta. This research aimed to answer how the materials are developed and what the materials look like. To gather the information, the researcher adopted Borg & Gall’s (1986 Research and Development (R&D method which was combined with Kemp’s instructional design model (1977 covering eight flexible steps. Due to time and financial constraints, only five steps of R&D were conducted in designing the materials. To gather the information, the researcher conducted some interviews. After designing the materials, the interview was conducted. The interview results showed that the designed materials were good, appropriate, and applicable. Nine suggestions were obtained to revise the materials which covered the level of difficulty of the text, the content of the exercises, the overview of the learning materials, teaching media, lesson plans, instructions, layout, and material implementation. The materials consist of six units. Each unit contains five sessions, namely “What’s Up?”, “Entering the Newsroom”, “Journalists’ Project”, “Entering the News Editor Room”, and “Lesson Learned”.   DOI: https://doi.org/10.24071/llt.2015.180107

Nurses' experiences providing palliative care to individuals living in rural communities: aspects of the physical residential setting.

Science.gov (United States)

Kaasalainen, S; Brazil, K; Williams, A; Wilson, D; Willison, K; Marshall, D; Taniguchi, A; Phillips, C

2014-01-01

Efforts are needed to improve palliative care in rural communities, given the unique characteristics and inherent challenges with respect to working within the physical aspects of residential settings. Nurses who work in rural communities play a key role in the delivery of palliative care services. Hence, the purpose of this study was to explore nurses' experiences of providing palliative care in rural communities, with a particular focus on the impact of the physical residential setting. This study was grounded in a qualitative approach utilizing an exploratory descriptive design. Individual telephone interviews were conducted with 21 community nurses. Data were analyzed by thematic content analysis. Nurses described the characteristics of working in a rural community and how it influences their perception of their role, highlighting the strong sense of community that exists but how system changes over the past decade have changed the way they provide care. They also described the key role that they play, which was often termed a 'jack of all trades', but focused on providing emotional, physical, and spiritual care while trying to manage many challenges related to transitioning and working with other healthcare providers. Finally, nurses described how the challenges of working within the physical constraints of a rural residential setting impeded their care provision to clients who are dying in the community, specifically related to the long distances that they travel while dealing with bad weather. These study findings contribute to our understanding of the experiences of nurses working in rural communities in terms of the provision of palliative care and the influence of the physical residential setting that surrounds them. These findings are important since nurses play a major role in caring for community-dwelling clients who are dying, but they are confronted with many obstacles. As such, these results may help inform future decisions about how to best improve

Lessons learned from setting up the NOWESP research data base: Experiences in an interdisciplinary research project

Science.gov (United States)

Radach, Günther; Gekeler, Jens

1996-09-01

Research carried out within the framework of the MAST project NOWESP (North-West European Shelf Programme) was based on a multi-parameter data set of existing marine data, relevant for estimating trends, variability and fluxes on the Northwest European Shelf. The data sets were provided by the partners of the project. Additional data sets were obtained from several other institutions. During the project, the data were organized in the NOWESP Research Data Base (NRDB), for which a special data base scheme was defined that was capable of storing different types of marine data. Data products, like time series and interpolated fields, were provided to the partners for analysis (Radach et al. [1997]). After three years of project time, the feasibility of such an approach is discussed. Ways of optimizing data access and evaluation are proposed. A project-oriented Research Data Base is a useful tool because of its flexibility and proximity to the research being carried out. However, several requirements must be met to derive optimum benefits from this type of service unit. Since this task usually is carried out by a limited number of staff, an early start of project data management is recommended. To enable future projects to succeed in an analogous compilation of relevant data for their use, as performed in NOWESP, the task of organizing the data sets for any short-term project should be shared between a research data base group and a national or international data centre whose experience and software could be used. It must be ensured that only quality controlled data sets from the individual data-produ cing projects are delivered to the national data centres. It is recommended that data quality control should be performed by the originators and/or data centres before delivering any data sets to the research data base. Delivery of the (full) data sets should be checked and their quality should be approved by authorized data centres.

Micro-Scale Experiments and Models for Composite Materials with Materials Research

DEFF Research Database (Denmark)

Zike, Sanita

Numerical models are frequently implemented to study micro-mechanical processes in polymer/fibre composites. To ensure that these models are accurate, the length scale dependent properties of the fibre and polymer matrix have to be taken into account. Most often this is not the case, and material...... properties acquired at macro-scale are used for micro-mechanical models. This is because material properties at the macro-scale are much more available and the test procedures to obtain them are well defined. The aim of this research was to find methods to extract the micro-mechanical properties of the epoxy...... resin used in polymer/fibre composites for wind turbine blades combining experimental, numerical, and analytical approaches. Experimentally, in order to mimic the stress state created by a void in a bulk material, test samples with finite root radii were made and subjected to a double cantilever beam...

The Strata-1 Regolith Dynamics Experiment: Class 1E Science on ISS

Science.gov (United States)

Fries, Marc; Graham, Lee; John, Kristen

2016-01-01

The Strata-1 experiment studies the evolution of small body regolith through long-duration exposure of simulant materials to the microgravity environment on the International Space Station (ISS). This study will record segregation and mechanical dynamics of regolith simulants in a microgravity and vibration environment similar to that experienced by regolith on small Solar System bodies. Strata-1 will help us understand regolith dynamics and will inform design and procedures for landing and setting anchors, safely sampling and moving material on asteroidal surfaces, processing large volumes of material for in situ resource utilization (ISRU) purposes, and, in general, predicting the behavior of large and small particles on disturbed asteroid surfaces. This experiment is providing new insights into small body surface evolution.

Experiences and shared meaning of teamwork and interprofessional collaboration among health care professionals in primary health care settings: a systematic review.

Science.gov (United States)

Sangaleti, Carine; Schveitzer, Mariana Cabral; Peduzzi, Marina; Zoboli, Elma Lourdes Campos Pavone; Soares, Cassia Baldini

2017-11-01

During the last decade, teamwork has been addressed under the rationale of interprofessional practice or collaboration, highlighted by the attributes of this practice such as: interdependence of professional actions, focus on user needs, negotiation between professionals, shared decision making, mutual respect and trust among professionals, and acknowledgment of the role and work of the different professional groups. Teamwork and interprofessional collaboration have been pointed out as astrategy for effective organization of health care services as the complexity of healthcare requires integration of knowledge and practices from differente professional groups. This integration has a qualitative dimension that can be identified through the experiences of health professionals and to the meaning they give to teamwork. The objective of this systematic review was to synthesize the best available evidence on the experiences of health professionals regarding teamwork and interprofessional collaboration in primary health care settings. The populations included were all officially regulated health professionals that work in primary health settings: dentistry, medicine, midwifery, nursing, nutrition, occupational therapy, pharmacy, physical education, physiotherapy, psychology, social work and speech therapy. In addition to these professionals, community health workers, nursing assistants, licensed practical nurses and other allied health workers were also included. The phenomena of interest were experiences of health professionals regarding teamwork and interprofessional collaboration in primary health care settings. The context was primary health care settings that included health care centers, health maintenance organizations, integrative medicine practices, integrative health care, family practices, primary care organizations and family medical clinics. National health surgery as a setting was excluded. The qualitative component of the review considered studies that

Radiological Characterisation from a Waste and Materials End-State Perspective: Practices and Experience

International Nuclear Information System (INIS)

Mommaert, Chantal; Andrieu, Caroline; Desnoyers, Yvon; Denis Pombet; Salsac, Marie-Delphine; Knaack, Michael; Altavilla, Massimo; Manes, Daniela; Takahashi, Hiroaki; Ul Syed, Naeem; Palomo, Nieves Martin; Larsson, Arne; Dunlop, Alister; Susan Brown; Emptage, Matthew; Black, Greg; Abu-Eid, Rateb; Szilagyi, Andrew; Weber, Inge; )

2017-01-01

Radiological characterisation is a key enabling activity for the planning and implementation of nuclear facility decommissioning. Effective characterisation allows the extent, location and nature of contamination to be determined and provides crucial information for facility dismantling, the management of material and waste arisings, the protection of workers, the public and the environment, and associated cost estimations. This report will be useful for characterisation practitioners who carry out tactical planning, preparation, optimisation and implementation of characterisation to support the decommissioning of nuclear facilities and the management of associated materials and waste. It compiles recent experience from NEA member countries in radiological characterisation, including from international experts, international case studies, an international conference, and international standards and guidance. Using this comprehensive evidence base, the report identifies relevant good practice and provides practical advice covering all stages of the characterisation process

Pre-conceptual design activities for the materials plasma exposure experiment

International Nuclear Information System (INIS)

Lumsdaine, Arnold; Rapp, Juergen; Varma, Venugopal; Bjorholm, Thomas; Bradley, Craig; Caughman, John; Duckworth, Robert; Goulding, Richard; Graves, Van; Giuliano, Dominic; Lessard, Timothy; McGinnis, Dean; Meitner, Steven

2016-01-01

Highlights: • The development of long-pulse nuclear fusion devices requires testing plasma facing components at reactor relevant conditions. • The pre-conceptual design of a proposed linear plasma facility is presented. • Engineering considerations for multiple systems—plasma source and heating, magnet, vacuum, water cooling, and target, are presented. - Abstract: The development of next step fusion facilities such as DEMO or a Fusion Nuclear Science Facility (FNSF) requires first closing technology gaps in some critical areas. Understanding the material-plasma interface is necessary to enable the development of divertors for long-pulse plasma facilities. A pre-conceptual design for a proposed steady-state linear plasma device, the Materials Plasma Exposure Experiment (MPEX), is underway. A helicon plasma source along with ion cyclotron and electron Bernstein wave heating systems will produce ITER divertor relevant plasma conditions with steady-state parallel heat fluxes of up to 40 MW/m"2 with ion fluxes up to 10"2"4/m"2 s on target. Current plans are for the device to use superconducting magnets to produce 1–2 T fields. As a steady-state device, active cooling will be required for components that interact with the plasma (targets, limiters, etc.), as well as for other plasma facing components (transport regions, vacuum tanks, diagnostic ports). Design concepts for the vacuum system, the cooling system, and the plasma heating systems have been completed. The device will include the capability for handling samples that have been neutron irradiated in order to consider the multivariate effects of neutrons, plasma, and high heat-flux on the microstructure of divertor candidate materials. A vacuum cask, which can be disconnected from the high field environment in order to perform in-vacuo diagnosis of the surface evolution is also planned for the facility.

Pre-conceptual design activities for the materials plasma exposure experiment

Energy Technology Data Exchange (ETDEWEB)

Lumsdaine, Arnold, E-mail: lumsdainea@ornl.gov; Rapp, Juergen; Varma, Venugopal; Bjorholm, Thomas; Bradley, Craig; Caughman, John; Duckworth, Robert; Goulding, Richard; Graves, Van; Giuliano, Dominic; Lessard, Timothy; McGinnis, Dean; Meitner, Steven

2016-11-01

Highlights: • The development of long-pulse nuclear fusion devices requires testing plasma facing components at reactor relevant conditions. • The pre-conceptual design of a proposed linear plasma facility is presented. • Engineering considerations for multiple systems—plasma source and heating, magnet, vacuum, water cooling, and target, are presented. - Abstract: The development of next step fusion facilities such as DEMO or a Fusion Nuclear Science Facility (FNSF) requires first closing technology gaps in some critical areas. Understanding the material-plasma interface is necessary to enable the development of divertors for long-pulse plasma facilities. A pre-conceptual design for a proposed steady-state linear plasma device, the Materials Plasma Exposure Experiment (MPEX), is underway. A helicon plasma source along with ion cyclotron and electron Bernstein wave heating systems will produce ITER divertor relevant plasma conditions with steady-state parallel heat fluxes of up to 40 MW/m{sup 2} with ion fluxes up to 10{sup 24}/m{sup 2} s on target. Current plans are for the device to use superconducting magnets to produce 1–2 T fields. As a steady-state device, active cooling will be required for components that interact with the plasma (targets, limiters, etc.), as well as for other plasma facing components (transport regions, vacuum tanks, diagnostic ports). Design concepts for the vacuum system, the cooling system, and the plasma heating systems have been completed. The device will include the capability for handling samples that have been neutron irradiated in order to consider the multivariate effects of neutrons, plasma, and high heat-flux on the microstructure of divertor candidate materials. A vacuum cask, which can be disconnected from the high field environment in order to perform in-vacuo diagnosis of the surface evolution is also planned for the facility.

Measuring the coefficient of restitution and more: a simple experiment to promote students’ critical thinking and autonomous work

Science.gov (United States)

González, Manuel Á.; González, Miguel Á.; Vegas, Jesús; Llamas, César

2017-09-01

A simple experiment on the determination of the coefficient of restitution of different materials is taken as the basis of an extendable work that can be done by students in an autonomous way. On the whole, the work described in this paper would involve concepts of kinematics, materials science, air drag and buoyancy, and would help students to think of physics as a whole subject instead of a set of, more or less, isolated parts. The experiment can be done either in teaching laboratories or as an autonomous work by students at home. Students’ smartphones and cheap balls of different materials are the only experimental materials required to do the experiment. The proposed work also permits the students to analyse the limitations of a physical model used in the experiment by analysing the approximations considered in it, and then enhancing their critical thinking.

Comparisons of physical experiment and discrete element simulations of sheared granular materials in an annular shear cell

Science.gov (United States)

Ji, S.; Hanes, D.M.; Shen, H.H.

2009-01-01

In this study, we report a direct comparison between a physical test and a computer simulation of rapidly sheared granular materials. An annular shear cell experiment was conducted. All parameters were kept the same between the physical and the computational systems to the extent possible. Artificially softened particles were used in the simulation to reduce the computational time to a manageable level. Sensitivity study on the particle stiffness ensured such artificial modification was acceptable. In the experiment, a range of normal stress was applied to a given amount of particles sheared in an annular trough with a range of controlled shear speed. Two types of particles, glass and Delrin, were used in the experiment. Qualitatively, the required torque to shear the materials under different rotational speed compared well with those in the physical experiments for both the glass and the Delrin particles. However, the quantitative discrepancies between the measured and simulated shear stresses were nearly a factor of two. Boundary conditions, particle size distribution, particle damping and friction, including a sliding and rolling, contact force model, were examined to determine their effects on the computational results. It was found that of the above, the rolling friction between particles had the most significant effect on the macro stress level. This study shows that discrete element simulation is a viable method for engineering design for granular material systems. Particle level information is needed to properly conduct these simulations. However, not all particle level information is equally important in the study regime. Rolling friction, which is not commonly considered in many discrete element models, appears to play an important role. ?? 2009 Elsevier Ltd.

Expansive learning in the university setting: the case for simulated clinical experience.

Science.gov (United States)

Haigh, Jacquelyn

2007-03-01

This paper argues that simulated practice in the university setting is not just a second best to learning in the clinical area but one which offers the potential for deliberation and deep learning [Eraut, M., 2000. Non-formal learning, implicit learning and tacit knowledge in professional work. Journal of Educational Psychology, 70, 113-136]. The context of student learning in an undergraduate midwifery programme is analysed using human activity theory [Engeström, Y., 2001. Expansive learning at work: toward an activity theoretical reconceptualization. Journal of Education and Work, 14, 133-156]. The advantages of this approach to student learning as opposed to situated learning theory and the concept of legitimate peripheral participation [Lave, J., Wenger, E., 1991. Situated Learning: Legitimate Peripheral Participation. Cambridge University Press, New York] are discussed. An activity system changes as a result of contradictions and tensions between what it purports to produce and the views of stakeholders (multi-voicedness) as well as its historical context (Historicity of activity). A focus group with students highlights their expressed need for more simulated practice experience. The views of midwifery lecturers are sought as an alternative voice on this tension in the current programme. Qualitative differences in types of simulated experience are explored and concerns about resources are raised in the analysis. Discussion considers the value of well planned simulations in encouraging the expression of tacit understanding through a group deliberative learning process [Eraut, M., 2000. Non-formal learning, implicit learning and tacit knowledge in professional work. Journal of Educational Psychology, 70, 113-136].

Experiences of Work-Life Conflict for the Athletic Trainer Employed Outside the National Collegiate Athletic Association Division I Clinical Setting

Science.gov (United States)

Mazerolle, Stephanie M.; Pitney, William A.; Eason, Christianne M.

2015-01-01

Context The intercollegiate setting receives much of the scholarly attention related to work-life conflict (WLC). However research has been focused on the National Collegiate Athletic Association Division I setting. Multiple factors can lead to WLC for the athletic trainer (AT), including hours, travel, and lack of flexibility in work schedules. Objective To investigate the experiences of WLC among ATs working in the non-Division I collegiate setting and to identify factors that contribute to fulfillment of work-life balance in this setting. Design Qualitative study. Setting Institutions in the National Collegiate Athletic Association Divisions II and III, the National Association of Intercollegiate Athletics, and the National Junior College Athletic Association. Patients or Other Participants A total of 244 ATs (128 women, 114 men; age = 37.5 ± 13.3 years, experience = 14 ± 12 years) completed phase I. Thirteen participants (8 women, 5 men; age = 38 ± 13 years, experience = 13.1 ± 11.4 years) completed phase II. Data Collection and Analysis For phase I, participants completed a previously validated and reliable (Cronbach α > .90) Web-based survey measuring their levels of WLC and work-family conflict (WFC). This phase included 2 WFC scales defining family; scale 1 defined family as having a partner or spouse with or without children, and scale 2 defined family as those individuals, including parents, siblings, grandparents, and any other close relatives, involved in one's life. Phase II consisted of an interview. Qualitative data were evaluated using content analysis. Data source and multiple-analyst triangulation secured credibility. Results The WFC scores were 26.33 ± 7.37 for scale 1 and 20.46 ± 10.14 for scale 2, indicating a moderate level of WFC for scale 1 and a low level of WFC for scale 2. Qualitative analyses revealed that organizational dimensions, such as job demands and staffing issues, can negatively affect WLC, whereas a combination of

Development of Teaching Materials for a Physical Chemistry Experiment Using the QR Code

OpenAIRE

吉村, 忠与志

2008-01-01

The development of teaching materials with the QR code was attempted in an educational environment using a mobile telephone. The QR code is not sufficiently utilized in education, and the current study is one of the first in the field. The QR code is encrypted. However, the QR code can be deciphered by mobile telephones, thus enabling the expression of text in a small space.Contents of "Physical Chemistry Experiment" which are available on the Internet are briefly summarized and simplified. T...

Experiences of stigma and discrimination in social and healthcare settings among trans people living with HIV in the UK.

Science.gov (United States)

Hibbert, M; Wolton, A; Crenna-Jennings, W; Benton, L; Kirwan, P; Lut, I; Okala, S; Ross, M; Furegato, M; Nambiar, K; Douglas, N; Roche, J; Jeffries, J; Reeves, I; Nelson, M; Weerawardhana, C; Jamal, Z; Hudson, A; Delpech, V

2018-07-01

The People Living with HIV StigmaSurvey UK 2015 was a community led national survey investigating experiences of people living with HIV in the UK in the past 12 months. Participants aged 18 and over were recruited through over 120 cross-sector community organisations and 46 HIV clinics to complete an anonymous online survey. Trans is an umbrella term which refers to individuals whose current gender identity is different to the gender they were assigned at birth. Trans participants self-identified via gender identity and gender at birth questions. Descriptive analyses of reported experiences in social and health care settings were conducted and multivariate logistic regression analyses were used to identify sociodemographic predictors of reporting being treated differently to non-HIV patients, and being delayed or refused healthcare treatment in the past 12 months. 31 out of 1576 participants (2%) identified as trans (19 trans women, 5 trans men, 2 gender queer/non-binary, 5 other). High levels of social stigma were reported for all participants, with trans participants significantly more likely to report worrying about verbal harassment (39% vs. 23%), and exclusion from family gatherings (23% vs. 9%) in the last 12 months, compared to cisgender participants. Furthermore, 10% of trans participants reported physical assault in the last 12 months, compared to 4% of cisgender participants. Identifying as trans was a predictor of reporting being treated differently to non-HIV patients (48% vs. 30%; aOR 2.61, CI 1.06, 6.42) and being delayed or refused healthcare (41% vs. 16%; aOR 4.58, CI 1.83, 11.44). Trans people living with HIV in the UK experience high levels of stigma and discrimination, including within healthcare settings, which is likely to impact upon health outcomes. Trans-specific education and awareness within healthcare settings could help to improve service provision for this demographic.

Investigating the experience of outdoor and adventurous project work in an educational setting using a self-determination framework

OpenAIRE

Sproule, J.; Martindale, R.; Wang, J.; Allison, P.; Nash, C.; Gray, S.

2013-01-01

The purpose of this study was to carry out a preliminary investigation to explore the use ofoutdoor and adventurous project work (PW) within an educational setting. Specifically, differencesbetween the PW and normal academic school experiences were examined using a selfdeterminationtheory framework integrated with a goal orientation and psychological skills perspective.Additionally, an exploratory investigation was carried out to examine the extent to which key motivation constructs predicted...

Goal Setting as Teacher Development Practice

Science.gov (United States)

Camp, Heather

2017-01-01

This article explores goal setting as a teacher development practice in higher education. It reports on a study of college teacher goal setting informed by goal setting theory. Analysis of study participants' goal setting practices and their experiences with goal pursuit offers a framework for thinking about the kinds of goals teachers might set…

Micro gravity - an important tool for development of advanced materials

International Nuclear Information System (INIS)

Sadiq, S.

1995-01-01

Microgravity provides the researchers the opportunity to investigate and improve the methods of creating advanced materials on earth. This can in turn assist in the advanced of economically significant technologies and technology infusement into the private sector. In some unique cases, involving inherently expensive materials that must have high purity, such as composites, high grade alloys etc. small amounts be made in space commercially and viably. A number of developed countries have gained sufficient expertise in material processing and other experiments under microgravity conditions, and their progress has been quite tremendous in this vital area of space research. The four important modes of platform, i.e., space shuttle/satellite, rocket flights, aircraft and drop tower tests have been employed for this purpose. Processing of materials in all such cases differs from the point of view of its cost effectiveness, time required to perform the expertise, instrumentation set up etc. In region of Far East and South East Asia, only one or two countries have made some advances in material processing experiments under microgravity conditions both in the upper atmosphere as well as using Drop Tower Test, but limited experimental means have made these countries to strive in this research area compared to work done in author advanced countries. The paper describes a brief history of microgravity experiments, their types and mode of transport employed for processing of novel materials under extreme low gravity or zero gravity conditions. This will definitely be useful and beneficial to developing nations of this region have entered an era of sophisticated and advanced materials processing and its utilization for industries such as aerospace, nuclear power plants, strategic materials, electronics, biological communication etc. (author)

Technical aspects of the joint JET-ISX-B beryllium limiter experiment

International Nuclear Information System (INIS)

Edmonds, P.H.; Dietz, K.J.; Mioduszewski, P.K.; Watson, R.D.; Emerson, L.C.; Gabbard, W.A.; Goodall, D.; Simpkins, J.E.; Yarber, J.L.

1984-01-01

An experiment has been performed on the Impurity Study Experiment (ISX-B) tokamak to test beryllium as a limiter material. Beryllium is an attractive candidate for a limiter and has been proposed for use in the Joint European Torus (JET) experiment. A temperature-controlled, segmented, beryllium top-rail limiter was located inside the plasma radius described by the existing titanium limiters. An extended set of diagnostics was added for measurement of scrapeoff and limiter parameters. These included visible and infrared monitoring systems, probes, and surface analysis experiments. Tokamak experiments included parameter surveys of both ohmically heated and neutral-beam-heated plasmas and an extended fluence test of the limiter

Towards a Generic Set of Packaging Material Key Figures

NARCIS (Netherlands)

ten Klooster, Roland; de Koeijer, Bjorn; de Lange, Jos

Many companies consider the reduction of packaging material as a relevant development direction, either required by cost savings, supply chain efficiency, sustainability or substantiated by regulations (directive 94/62/EC). This aligns with an eco-efficient redundancy perspective on packaging.

COOLOCE debris bed experiments and simulations investigating the coolability of cylindrical beds with different materials and flow modes

Energy Technology Data Exchange (ETDEWEB)

Takasuo, E.; Kinnunen, T.; Holmstroem, S.; Lehtikuusi, T. [VTT Technical Research Centre of Finland (Finland)

2013-07-15

The COOLOCE experiments aim at investigating the coolability of debris beds of different geometries, flow modes and materials. A debris bed may be formed of solidified corium as a result of a severe accident in a nuclear power reactor. The COOLOCE-8 test series consisted of experiments with a top-flooded test bed with irregular gravel as the simulant material. The objective was to produce comparison data useful in estimating the effects of different particle materials and the possible effect of the test arrangement on the results. It was found that the dryout heat flux (DHF) measured for the gravel was lower compared to previous experiments with spherical beads, and somewhat lower compared to the early STYX experiments. The difference between the beads and gravel is at least partially explained by the smaller average size of the gravel particles. The COOLOCE-9 test series included scoping experiments examining the effect of subcooling of the water pool in which the debris bed is immersed. The experiments with initially subcooled pool suggest that the subcooling may increase DHF and increase coolability. The aim of the COOLOCE-10 experiments was to investigate the effect of lateral flooding on the DHF a cylindrical test bed. The top of the test cylinder and its sidewall were open to water infiltration. It was found that the DHF is increased compared to a top-flooded cylinder by more than 50%. This suggests that coolability is notably improved. 2D simulations of the top-flooded test beds have been run with the MEWA code. Prior to the simulations, the effective particle diameter for the spherical beads and the irregular gravel was estimated by single-phase pressure loss measurements performed at KTH in Sweden. Parameter variations were done for particle size and porosity used as input in the models. It was found that with the measured effective particle diameter and porosity, the simulation models predict DHF with a relatively good accuracy in the case of spherical

A balancing act: a phenomenological exploration of medical students' experiences of using mobile devices in the clinical setting.

Science.gov (United States)

Rashid-Doubell, F; Mohamed, S; Elmusharaf, K; O'Neill, C S

2016-05-03

The aims of this study were to describe the experiences of senior students using mobile devices in a clinical setting while learning and interacting with clinical teachers, patients and each other, and to identify challenges that facilitated or impeded the use of such devices in the hospital. Interpretative phenomenology was chosen to guide our enquiry. Semi-structured interviews were conducted to examine the experiences of five senior medical students using mobile devices in the clinical setting. Senior medical students at an international medical school in the Middle East. Three main themes emerged from the data analysis: learning; professional identity and transitioning from student to doctor. The findings showed that using mobile devices in the clinical area as a learning tool was not a formalised process. Rather, it was opportunistic learning at the bedside and on occasion a source of distraction from clinical teaching. Students needed to negotiate relationships between themselves, the clinical teacher and patients in order to ensure that they maintained an acceptable professional image. Participants experienced and negotiated the change from student to doctor making them mindful of using their devices at the bedside. Mobile devices are part of daily life for a medical student and there is a need to adapt medical education in the clinical setting, to allow the students to use their devices in a sensitive manner. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Methodological developments and materials in salt-rock preparation for irradiation experiments

International Nuclear Information System (INIS)

Garcia Celma, A.; Van Wees, H.; Miralles, L.

1991-01-01

For the first time synthetic salt-rock samples have been produced. Production and preparation of those samples and of other types of rock-salt for experiments and observation require many special handlings. We applied technical knowledge already developed by the HPT Laboratory of the Geology Department of the Rijksuniversiteit Utrecht (high pressure techniques, salt-rock preparation), and by the workshops of the ECN, Petten, and FDO, Amsterdam (mechanical precision). Procedures have been applied and/or modified to solve specific problems. Many of them were never reported before. Moreover, new techniques have been developed. Rock-salt samples have been machined, sawn, ground, glued, etc., with a maximum of precision, a minimum of damage and in dry conditions (without water). Etching, peeling and thin section production has been carried out on irradiated and unirradiated samples. Valves, end pieces, jackets, etc. have been tested and/or produced. These handlings were directed to produce samples for the HAW experiment. Their development required not only knowledge, but also a lot of trial, failures and time. To avoid repetition of this effort, the procedures, materials, instruments and their characteristics are described in detail in this report

Experiences from occupational exposure limits set on aerosols containing allergenic proteins

DEFF Research Database (Denmark)

Nielsen, Gunnar; Larsen, Søren; Hansen, Jitka S

2012-01-01

Occupational exposure limits (OELs) together with determined airborne exposures are used in risk assessment based managements of occupational exposures to prevent occupational diseases. In most countries, OELs have only been set for few protein-containing aerosols causing IgE-mediated allergies. ...... is available for setting OELs for proteins and protein-containing aerosols where the critical effect is IgE sensitization and IgE-mediated airway diseases.......Occupational exposure limits (OELs) together with determined airborne exposures are used in risk assessment based managements of occupational exposures to prevent occupational diseases. In most countries, OELs have only been set for few protein-containing aerosols causing IgE-mediated allergies...... for setting OELs. Our aim is to analyse prerequisites for setting OELs for the allergenic protein-containing aerosols. Opposite to the key effect of toxicological reactions, two thresholds, one for the sensitization phase and one for elicitation of IgE-mediated symptoms in sensitized individuals, are used...

HNCA-TOCSY-CANH experiments with alternate 13C-12C labeling: a set of 3D experiment with unique supra-sequential information for mainchain resonance assignment

International Nuclear Information System (INIS)

Takeuchi, Koh; Gal, Maayan; Takahashi, Hideo; Shimada, Ichio; Wagner, Gerhard

2011-01-01

Described here is a set of three-dimensional (3D) NMR experiments that rely on CACA-TOCSY magnetization transfer via the weak 3 J(C α C α ) coupling. These pulse sequences, which resemble recently described 13 C detected CACA-TOCSY (Takeuchi et al. 2010) experiments, are recorded in 1 H 2 O, and use 1 H excitation and detection. These experiments require alternate 13 C- 12 C labeling together with perdeuteration, which allows utilizing the small 3 J(C α C α ) scalar coupling that is otherwise masked by the stronger 1 J CC couplings in uniformly 13 C labeled samples. These new experiments provide a unique assignment ladder-mark that yields bidirectional supra-sequential information and can readily straddle proline residues. Unlike the conventional HNCA experiment, which contains only sequential information to the 13 (C α ) of the preceding residue, the 3D hnCA-TOCSY-caNH experiment can yield sequential correlations to alpha carbons in positions i−1, i + 1 and i−2. Furthermore, the 3D hNca-TOCSY-caNH and Hnca-TOCSY-caNH experiments, which share the same magnetization pathway but use a different chemical shift encoding, directly couple the 15 N- 1 H spin pair of residue i to adjacent amide protons and nitrogens at positions i−2, i−1, i + 1 and i + 2, respectively. These new experimental features make protein backbone assignments more robust by reducing the degeneracy problem associated with the conventional 3D NMR experiments.

A cultural setting where the other-race effect on face recognition has no social-motivational component and derives entirely from lifetime perceptual experience.

Science.gov (United States)

Wan, Lulu; Crookes, Kate; Reynolds, Katherine J; Irons, Jessica L; McKone, Elinor

2015-11-01

Competing approaches to the other-race effect (ORE) see its primary cause as either a lack of motivation to individuate social outgroup members, or a lack of perceptual experience with other-race faces. Here, we argue that the evidence supporting the social-motivational approach derives from a particular cultural setting: a high socio-economic status group (typically US Whites) looking at the faces of a lower status group (US Blacks) with whom observers typically have at least moderate perceptual experience. In contrast, we test motivation-to-individuate instructions across five studies covering an extremely wide range of perceptual experience, in a cultural setting of more equal socio-economic status, namely Asian and Caucasian participants (N = 480) tested on Asian and Caucasian faces. We find no social-motivational component at all to the ORE, specifically: no reduction in the ORE with motivation instructions, including for novel images of the faces, and at all experience levels; no increase in correlation between own- and other-race face recognition, implying no increase in shared processes; and greater (not the predicted less) effort applied to distinguishing other-race faces than own-race faces under normal ("no instructions") conditions. Instead, the ORE was predicted by level of contact with the other-race. Our results reject both pure social-motivational theories and also the recent Categorization-Individuation model of Hugenberg, Young, Bernstein, and Sacco (2010). We propose a new dual-route approach to the ORE, in which there are two causes of the ORE-lack of motivation, and lack of experience--that contribute differently across varying world locations and cultural settings. Copyright © 2015 Elsevier B.V. All rights reserved.

Material Surface Characteristics and Plasma Performance in the Lithium Tokamak Experiment

Science.gov (United States)

Lucia, Matthew James

The performance of a tokamak plasma and the characteristics of the surrounding plasma facing component (PFC) material surfaces strongly influence each other. Despite this relationship, tokamak plasma physics has historically been studied more thoroughly than PFC surface physics. The disparity is particularly evident in lithium PFC research: decades of experiments have examined the effect of lithium PFCs on plasma performance, but the understanding of the lithium surface itself is much less complete. This latter information is critical to identifying the mechanisms by which lithium PFCs affect plasma performance. This research focused on such plasma-surface interactions in the Lithium Tokamak Experiment (LTX), a spherical torus designed to accommodate solid or liquid lithium as the primary PFC. Surface analysis was accomplished via the novel Materials Analysis and Particle Probe (MAPP) diagnostic system. In a series of experiments on LTX, the MAPP x-ray photoelectron spectroscopy (XPS) and thermal desorption spectroscopy (TDS) capabilities were used for in vacuo interrogation of PFC samples. This represented the first application of XPS and TDS for in situ surface analysis of tokamak PFCs. Surface analysis indicated that the thin (dLi ˜ 100nm) evaporative lithium PFC coatings in LTX were converted to Li2O due to oxidizing agents in both the residual vacuum and the PFC substrate. Conversion was rapid and nearly independent of PFC temperature, forming a majority Li2O surface within minutes and an entirely Li2O surface within hours. However, Li2O PFCs were still capable of retaining hydrogen and sequestering impurities until the Li2 O was further oxidized to LiOH, a process that took weeks. For hydrogen retention, Li2O PFCs retained H+ from LTX plasma discharges, but no LiH formation was observed. Instead, results implied that H+ was only weakly-bound, such that it almost completely outgassed as H 2 within minutes. For impurity sequestration, LTX plasma performance

High flux materials testing reactor HFR Petten. Characteristics of facilities and standard irradiation devices

International Nuclear Information System (INIS)

Roettger, H.; Hardt, P. von der; Tas, A.; Voorbraak, W.P.

1981-01-01

For the materials testing reactor HFR some characteristic information is presented. Besides the nuclear data for the experiment positions short descriptions are given of the most important standard facilities for material irradiation and radionuclide production. One paragraph deals with the experimental set-ups for solid state and nuclear structure investigations. The information in this report refers to a core type, which is operational since March 1977. The numerical data compiled have been up-dated to January 1981

Sensitivity of corneal biomechanical and optical behavior to material parameters using design of experiments method.

Science.gov (United States)

Xu, Mengchen; Lerner, Amy L; Funkenbusch, Paul D; Richhariya, Ashutosh; Yoon, Geunyoung

2018-02-01

The optical performance of the human cornea under intraocular pressure (IOP) is the result of complex material properties and their interactions. The measurement of the numerous material parameters that define this material behavior may be key in the refinement of patient-specific models. The goal of this study was to investigate the relative contribution of these parameters to the biomechanical and optical responses of human cornea predicted by a widely accepted anisotropic hyperelastic finite element model, with regional variations in the alignment of fibers. Design of experiments methods were used to quantify the relative importance of material properties including matrix stiffness, fiber stiffness, fiber nonlinearity and fiber dispersion under physiological IOP. Our sensitivity results showed that corneal apical displacement was influenced nearly evenly by matrix stiffness, fiber stiffness and nonlinearity. However, the variations in corneal optical aberrations (refractive power and spherical aberration) were primarily dependent on the value of the matrix stiffness. The optical aberrations predicted by variations in this material parameter were sufficiently large to predict clinically important changes in retinal image quality. Therefore, well-characterized individual variations in matrix stiffness could be critical in cornea modeling in order to reliably predict optical behavior under different IOPs or after corneal surgery.

Fracture-mechanics data deduced from thermal-shock and related experiments with LWR pressure-vessel material

International Nuclear Information System (INIS)

Cheverton, R.D.; Canonico, D.A.; Iskander, S.K.; Bolt, S.E.; Holz, P.P.; Nanstad, R.K.; Stelzman, W.J.

1982-01-01

Pressurized water reactors (PWRs) are susceptible to certain types of hypothetical accidents that can subject the reactor pressure vessel to severe thermal shock, that is, a rapid cooling of the inner surface of the vessel wall. The thermal-shock loading, coupled with the radiation-induced reduction in the material fracture toughness, introduces the possibility of propagation of preexistent flaws and what at one time were regarded as somewhat unique fracture-oriented conditions. Several postulated reactor accidents have been analyzed to discover flaw behavior trends; seven intermediate-scale thermal-shock experiments with steel cylinders have been conducted; and corresponding materials characterization studies have been performed. Flaw behavior trends and related fracture-mechanics data deduced from these studies are discussed

Hearing the voices of children and young people to develop and test a patient-reported experience measure in a specialist paediatric setting.

Science.gov (United States)

Wray, Jo; Hobden, Sylvie; Knibbs, Sarah; Oldham, Geralyn

2018-03-01

To develop and test patient-reported experience measures (PREMs) for children and young people in a specialist paediatric hospital setting. Six PREMs were developed and tested by children and young people for children and young people aged 8-11, 12-13 and 14-16 years in inpatient and outpatient settings. A week-long pilot was implemented across inpatient wards and outpatient clinics to identify facilitators and barriers to the routine use of PREMs in a real-time setting across our organisation. Tertiary paediatric hospital. Final PREMs; identified facilitators and barriers to implementation. 543 children and young people aged 8-16 years attending outpatient clinics or inpatient wards across a range of specialties. Three key themes about hospital experience were identified during focus groups: facilities, treatment and tests and people working at the hospital, and these provided the structure for the questionnaires. During cognitive testing the questionnaires were generally understood but some revisions to language and length of the questionnaires were required. Two designs were selected for the final PREMs. During acceptability and feasibility testing it was evident that children and young people liked the PREMs and wanted to give feedback on their hospital experience. Particular challenges for routine use of the PREMs focused on sustainability and resources. The new PREMs will provide children and young people receiving care in specialist paediatric hospitals with the opportunity to provide feedback on their experience. Sustainability and ensuring that feedback results in improvements need to be addressed in future work. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Setting the Record Straight. The Truth About Fad Diets.

Science.gov (United States)

Wheat Foods Council, Parker, CO.

The Setting the Record Straight information packet presents facts to set the record straight about nutrition and debunk fad diets. The kit features materials designed to communicate the importance of balanced eating. Materials include: a time line of fad diets; four reproducible fad diet book review handouts that show the misleading claims rampant…

Emission of γ rays from various materials pulsed with 14-MeV neutrons

International Nuclear Information System (INIS)

Goldberg, E.; Hansen, L.F.; Howerton, R.J.; Komoto, T.T.; Pohl, B.A.

1987-10-01

We have performed a number of experiments at LLNL recently to investigate the leakage of gamma rays from spheres of selected materials pulsed centrally with 14-MeV neutrons. Such spectral information may be carefully compared to calculational results to validate the transport models, particularly the nuclear cross section data base. In the present case, the TART code and SANDYL codes are used to explicitly calculate the observable, the recoil electron spectrum. The materials studied were H 2 O, 6 LiD, Be, C, 14 N, CF 2 , Al, Si, Ti, Fe, Cu, Ta, W, Au, Pb, Th, and 238 U. Generally, agreement was good between experiment and calculation. However, for some, the calculations significantly underestimated or overestimated experiment. For oxygen (i.e., H 2 O), the ENDL cross section set led to a sizeable calculational overestimate. Re-examination led to a large improvement. For tungsten, the calculated output was ∼30% below experiment. A re-evaluation led to closer agreement. 16 refs., 10 figs., 1 tab

Elastic and inelastic electrons in the double-slit experiment: A variant of Feynman's which-way set-up.

Science.gov (United States)

Frabboni, Stefano; Gazzadi, Gian Carlo; Grillo, Vincenzo; Pozzi, Giulio

2015-07-01

Modern nanotechnology tools allowed us to prepare slits of 90 nm width and 450 nm spacing in a screen almost completely opaque to 200 keV electrons. Then by covering both slits with a layer of amorphous material and carrying out the experiment in a conventional transmission electron microscope equipped with an energy filter we can demonstrate that the diffraction pattern, taken by selecting the elastically scattered electrons, shows the presence of interference fringes, but with a bimodal envelope which can be accounted for by taking into account the non-constant thickness of the deposited layer. However, the intensity of the inelastically scattered electrons in the diffraction plane is very broad and at the limit of detectability. Therefore the experiment was repeated using an aluminum film and a microscope also equipped with a Schottky field emission gun. It was thus possible to observe also the image due to the inelastically scattered electron, which does not show interference phenomena both in the Fraunhofer or Fresnel regimes. If we assume that inelastic scattering through the thin layer covering the slits provides the dissipative process of interaction responsible for the localization mechanism, then these experiments can be considered a variant of the Feynman which-way thought experiment. Copyright © 2015 Elsevier B.V. All rights reserved.

"PROCESS and UVolution: photochemistry experiments in Low Earth Orbit": investigation of the photostability of organic and mineral material exposed to Mars surface UV radiation conditions

Science.gov (United States)

Stalport, Fabien; Guan, Yuan Yong; Noblet, Audrey; Coll, Patrice; Szopa, Cyril; Macari, Frederique; Person, Alain; Chaput, Didier; Raulin, Francois; Cottin, Hervé

The harsh martian environment could explain the lack of organics and minerals such as car-bonates by destroying them: i) no organic molecule has been found at the two different landing sites of the Viking landers within the detection limits of the instruments onboard, ii) to date, no large deposits of carbonates have been detected and their detection is specific of local ar-eas and in very low amounts. In this context several experimental and numerical modelling studies were led to evaluate the possibility for the destruction or evolution of the organics and carbonates under the martian surface environmental conditions. The presence of UV radiation has been proposed to explain the photodecomposition of such material. This is the reason why, to investigate the nature, abundance, and stability of organic and mineral material that could survive under such environmental conditions, we exposed in low Earth orbit organic molecules and carbonates (also biominerals) with martian relevance to solar UV radiation ¿ 200 nm, in the frame of the experiment UVolution, onboard the BIOPAN ESA module which was set outside a Russian Foton automated capsule and exposed to space condition during 12 days in September 2007, and the experiment PROCESS (hervé peux tu rajouter quelques infos sur le temps exact d'exposition stp) which was set outside the International Space Station (ISS). Here, we present results with regard to the impact of solar UV radiation on the targeted molecules. Preliminary results indicate that that no organic sample seems to resist to the solar UV radiation if directly exposed to it. Conversely our results show that the exposed carbonates seem to be stable to the solar UV radiation if directly exposed to it. Moreover, the stability of the biominerals strengthens the interest to explore deeper their potential as life records at Mars. Hence they should be considered as primary targets for in situ analyses during future missions.

Leisure-time youth centres as health-promoting settings: Experiences from multicultural neighbourhoods in Sweden.

Science.gov (United States)

Fredriksson, Ingela; Geidne, Susanna; Eriksson, Charli

2018-02-01

The aim of this paper is to advocate for the importance of meaningful leisure time for young people from a health-promotion perspective using experiences from two youth centres in multicultural neighbourhoods in Sweden. In this practice-based study, data were collected between 2012 and 2014 at two youth centres in multicultural, socially deprived suburbs in Sweden using surveys with 12- to 16-year-old adolescents ( n = 207), seven individual interviews with staff and three cooperation partners in the neighbourhoods, and six group interviews with adolescents (50% girls). Quantitative, qualitative and mixed methods were used for analysis. As part of the youth centres' strategies, they are open and inclusive, foster supportive relationships, emphasise youth empowerment, and integrate family, school and community in their work. The youth centres are health-promoting settings with regard to four of the action areas in the Ottawa Charter: build healthy public policy, create supportive environments, strengthen community actions and develop personal skills. There is a need for a variety and a combination of various structured and unstructured leisure-time activities because young people's background and life situation plays a role for their participation in leisure-time activities. We conclude that youth centres are well placed to be or to become health-promoting settings if the activities takes place in a structured environment.

Choice Experiment Analysis of Outdoor Decking Material Selection in E-Commerce Market in Finland

OpenAIRE

Holopainen, Jani Markus; Toppinen, Anne Maarit Kristiina; Lähtinen, Katja Päivikki; Rekola, Mika Olavi

2017-01-01

Since the early 1990s, there has been hope that the uptake of certified forest products would ensure more sustainable forest management and also deliver business benefits along the value chain. Our study applies a Discrete Choice Experiment (DCE) to model an e-commerce purchase in the case of multiple products with various attribute and certification combinations in the Finnish retail outdoor decking material market. We received 2772 responses from 231 participants in an online survey. Applyi...

Simple material physics experiment for studying phase diagrams and solid state transformations in alloys

Energy Technology Data Exchange (ETDEWEB)

Kaur, S; Kamal, R [Punjabi Univ., Patiala (India). Dept. of Physics

1977-09-01

Study of phase diagram and accompanying solid state transformations is essential to determine the best possible composition, manufacturing techniques and physical properties of an alloy. A simple technique having wide applications in metallurgical industry is to study the temperature--time curve of the alloy undergoing cooling with an uniform rate. An experiment which uses this technique is described. It is widely applicable in the fields of materials science, applied solid state physics, physical metallurgy and physical chemistry.

The perturbation theory in the fundamental mode. Its application to the analysis of neutronic experiments involving small amounts of materials in fast neutron multiplying media

International Nuclear Information System (INIS)

Remsak, Stanislav.

1975-01-01

The formalism of the perturbation theory at the first order, is developed in its simplest form: diffusion theory in the fundamental mode and then the more complex formalism of the transport theory in the fundamental mode. A comparison shows the effect of the angular correlation between the fine structures of the flux and its adjoint function, the difference in the treatment of neutron leakage phenomena, and the existence of new terms in the perturbation formula, entailing a reactivity representation in the diffusion theory that is not quite exact. Problems of using the formalism developed are considered: application of the multigroup formalism, transients of the flux and its adjoint function, validity of the first order approximation etc. A detailed analysis allows the formulation of a criterion specifying the validity range. Transients occuring in the reference medium are also treated. A set of numerical tests for determining a method of elimination of transient effects is presented. Some differential experiments are then discussed: sodium blowdown in enriched uranium or plutonium cores, experiments utilizing some structural materials (iron and oxygen) and plutonium sample oscillations. The Cadarache version II program was systematically used but the analysis of the experiments of plutonium sample oscillation in Ermine required the Cadarache version III program [fr

Electronic processes in non-crystalline materials

CERN Document Server

Mott, Nevill Francis

2012-01-01

Since the first edition of this highly successful book the field saw many great developments both in experimental and theoretical studies of electrical properties of non-crystalline solids. It became necessary to rewrite nearly the whole book, while the aims of the second edition remained the same: to set out the theoretical concepts, to test them by comparison with experiment for a wide variety of phenomena, and to apply them to non-crystalline materials. Sir Nevill Mott shared the1977 Nobel Prize for Physics, awarded for his research work in this field. The reissue of this book as part of th

Set-fit effects in choice.

Science.gov (United States)

Evers, Ellen R K; Inbar, Yoel; Zeelenberg, Marcel

2014-04-01

In 4 experiments, we investigate how the "fit" of an item with a set of similar items affects choice. We find that people have a notion of a set that "fits" together--one where all items are the same, or all items differ, on salient attributes. One consequence of this notion is that in addition to preferences over the set's individual items, choice reflects set-fit. This leads to predictable shifts in preferences, sometimes even resulting in people choosing normatively inferior options over superior ones.

Turkish Air Force's Experiences in Chemical Material Acquisition

National Research Council Canada - National Science Library

Taskiran, Huseyin

2002-01-01

.... In addition, it analyzes the chemical material acquisition from business perspective. Due to operating in different environments, the Turkish Air Force and the private sector have different objectives in the acquisition of chemical materials...

Effects of material and non-material rewards on remembering to do things for others

Directory of Open Access Journals (Sweden)

Maria A. Brandimonte

2015-12-01

Full Text Available Recent research has shown that pro-social prospective memory, i.e., remembering to do something for others, is negatively affected by the presence of small material rewards. While this competition between pro-social and self-gain motives leads to poor memory for the intention, people do not seem to be aware of the possible collision effects of competing motives (Brandimonte, Ferrante, Bianco, & Villani, 2010. Extending research on this general topic, in two activity-based prospective memory experiments, we explored the effects of different types and amount of rewards on pro-social prospective remembering. In Experiment 1, participants could receive no reward, a low material reward (1 euro, or a high material reward (20 euro for their pro-social prospective memory action. In Experiment 2, their pro-social prospective memory performance could be rewarded or not with an image reward (publicity of their altruistic behavior. Results revealed that introducing a small material reward (Experiment 1 or a non-material reward (Experiment 2 impaired pro-social prospective memory. However, introducing a high material reward eliminated the impairment (Experiment 1. Importantly, in Experiment 1, ongoing task performance in the pro-social condition was faster than in the No PM condition. However, in Experiment 2, ongoing task costs emerged in the presence of a non-material reward, as compared to the pro-social condition. Also, results from two independent ratings showed that people’s predictions on their future pro-social actions were at odds (Experiment 1 or in line (Experiment 2 with actual PM performance. It is suggested that, according to the nature and amount of rewards, memory for a pro-social future action may be modulated by conscious or unconscious motivational mechanisms.

Cuing consumerism: situational materialism undermines personal and social well-being.

Science.gov (United States)

Bauer, Monika A; Wilkie, James E B; Kim, Jung K; Bodenhausen, Galen V

2012-05-01

Correlational evidence indicates that materialistic individuals experience relatively low levels of well-being. Across four experiments, we found that situational cuing can also trigger materialistic mind-sets, with similarly negative personal and social consequences. Merely viewing desirable consumer goods resulted in increases in materialistic concerns and led to heightened negative affect and reduced social involvement (Experiment 1). Framing a computer task as a "Consumer Reaction Study" led to a stronger automatic bias toward values reflecting self-enhancement, compared with framing the same task as a "Citizen Reaction Study" (Experiment 2). Consumer cues also increased competitiveness (Experiment 3) and selfishness in a water-conservation dilemma (Experiment 4). Thus, the costs of materialism are not localized only in particularly materialistic people, but can also be found in individuals who happen to be exposed to environmental cues that activate consumerism-cues that are commonplace in contemporary society.

Full-scale experimentations on alternative materials in roads: analysis of study practices.

Science.gov (United States)

François, D; Jullien, A; Kerzreho, J P; Chateau, L

2009-03-01

In France beginning in the 1990s, the topic of road construction using various alternative materials has given rise to several studies aimed at clarifying the technical and environmental feasibility of such an option. Although crucial to understanding and forecasting their behaviour in the field, an analysis of feedback from onsite experiences (back analysis) of roads built with alternative materials has not yet been carried out. The aim of the CAREX project (2003-2005) has been to fill this gap at the national scale. Based on a stress-response approach applied to both the alternative material and the road structure and including the description of external factors, a dedicated standardised framework for field data classification and analysis was adopted. To carry out this analysis, a set of 17 documented field experiments was identified through a specific national survey. It appears that a great heterogeneity exists in data processing procedures among studies. The description of material is acceptable while it is generally poor regarding external factors and structure responses. Structure monitoring is usually brief and mechanical loads too weak, which limits the significance of field testing. For future full-scale experiments, strengthening the realism within the testing conditions would be appropriate.

Experiments on different materials (polyamide, stainless & galvanized steel) influencing geothermal CaCO3 scaling formation: Polymorphs & elemental incorporation

Science.gov (United States)

Wedenig, Michael; Dietzel, Martin; Boch, Ronny; Hippler, Dorothee

2016-04-01

Thermal water is increasingly used for heat and electric power production providing base-load capable renewable and virtually unlimited geothermal energy. Compared to other energy sources geothermal facilities are less harmful to the environment, i.e. chemically and visually. In order to promote the economic viability of these systems compared to other traditional and renewable energy sources, production hindering processes such as corrosion and scaling of components arising from the typically high salinity thermal waters have to be considered as important economic factors. In this context, using proper materials being in contact with the thermal water is crucial and a playground for further improvements. Aim of the study presented, are basic experiments and observations of scaling and corrosive effects from hydrothermal water interacting with different materials and surfaces (stainless steel, polyamide, galvanized steel) and in particular the nucleation and growth effects of these materials regarding the precipitation of solid carbonate phases. The incorporation of Mg, Sr and Ba cations into the carbonate scalings are investigated as environmental proxy. For this purpose, hydrothermal carbonate precipitating experiments were initialized by mixing NaHCO3 and Ca-Mg-Sr-Ba-chloride solutions at temperatures ranging from 40 to 80 °C in glass reactors hosting artificial substrates of the above mentioned materials. The experiments show a strong dependence of the precipitation behaviour of calcium carbonate polymorphs on the particular material being present. Stainless steel and polyamide seem to restrict aragonite formation, whereas galvanized steel supports aragonite nucleation. Vaterite formation is promoted by polyamide surfaces. Importantly, vaterite is more soluble (less stable) compared to the other anhydrous calcium carbonate polymorphs, i.e. vaterite can be more easily re-dissolved. Thus, the use of polyamide components might reduce the amount and durability of

The High Energy Materials Science Beamline (HEMS) at PETRA III

International Nuclear Information System (INIS)

Schell, Norbert; King, Andrew; Beckmann, Felix; Ruhnau, Hans-Ulrich; Kirchhof, Rene; Kiehn, Ruediger; Mueller, Martin; Schreyer, Andreas

2010-01-01

The HEMS Beamline at the German high-brilliance synchrotron radiation storage ring PETRA III is fully tunable between 30 and 250 keV and optimized for sub-micrometer focusing. Approximately 70 % of the beamtime will be dedicated to Materials Research. Fundamental research will encompass metallurgy, physics and chemistry with first experiments planned for the investigation of the relationship between macroscopic and micro-structural properties of polycrystalline materials, grain-grain-interactions, and the development of smart materials or processes. For this purpose a 3D-microsctructure-mapper has been designed. Applied research for manufacturing process optimization will benefit from high flux in combination with ultra-fast detector systems allowing complex and highly dynamic in-situ studies of micro-structural transformations, e.g. during welding processes. The beamline infrastructure allows accommodation of large and heavy user provided equipment. Experiments targeting the industrial user community will be based on well established techniques with standardized evaluation, allowing full service measurements, e.g. for tomography and texture determination. The beamline consists of a five meter in-vacuum undulator, a general optics hutch, an in-house test facility and three independent experimental hutches working alternately, plus additional set-up and storage space for long-term experiments. HEMS is under commissioning as one of the first beamlines running at PETRA III.

Provision and Dissemination of Easy-To-Read Materials: An experience

Directory of Open Access Journals (Sweden)

Faezeh Amini

2018-06-01

Full Text Available -Patient education is one of the most important factors for the provision of patients and their families' rights at health centers. Some of the benefits of patient education include: Increasing the level of health literacy, developing self-care skills in chronic diseases, increasing knowledge about conditions, improving the quality of care and helping the patient to achieve more self-sufficiency and reducing health care costs. Medical Librarians can help health professionals and nurses to promote community health by identifying useful information as well as writing them in plain language. This paper reports an experience about creating a nongovernmental center for the provision and dissemination of easy-to-read materials. It is hoped that launching and supporting such centers, in addition to promoting community health, will guarantee the patients' rights to access high quality and authentic health educational resources. This can also provide a field for the participation of various health groups and the activities of graduates of the above fields.

In-Pile Experiment of a New Hafnium Aluminide Composite Material to Enable Fast Neutron Testing in the Advanced Test Reactor

Energy Technology Data Exchange (ETDEWEB)

Donna Post Guillen; Douglas L. Porter; James R. Parry; Heng Ban

2010-06-01

A new hafnium aluminide composite material is being developed as a key component in a Boosted Fast Flux Loop (BFFL) system designed to provide fast neutron flux test capability in the Advanced Test Reactor. An absorber block comprised of hafnium aluminide (Al3Hf) particles (~23% by volume) dispersed in an aluminum matrix can absorb thermal neutrons and transfer heat from the experiment to pressurized water cooling channels. However, the thermophysical properties, such as thermal conductivity, of this material and the effect of irradiation are not known. This paper describes the design of an in-pile experiment to obtain such data to enable design and optimization of the BFFL neutron filter.

Setting up the photoluminescence laboratory at ISOLDE & Perturbed Angular Correlation spectroscopy for BIO physics experiments using radioactive ions

CERN Document Server

Savva, Giannis

2016-01-01

The proposed project I was assigned was to set up the photoluminescence (PL) laboratory at ISOLDE, under the supervision of Karl Johnston. My first week at CERN coincided with the run of a BIO physics experiment using radioactive Hg(II) ions in which I also participated under the supervision of Stavroula Pallada. This gave me the opportunity to work in two projects during my stay at CERN and in the present report I describe briefly my contribution to them.

Materials data base as an interface between fusion reactor designs and materials development

International Nuclear Information System (INIS)

Ishino, S.; Iwata, S.

1983-01-01

The materials data base is an integrated information system of experimental and/or calculated data of materials being compiled to meet the broad needs for materials data by taking advantage of the data base management systems. In this paper the objective of such computerized data base is described from the viewpoint of materials engineers and fusion system designers. Materials data spread themselves widely from the field that relates fundamental understanding of the behaviors of electrons, atoms, vacancies, dislocations and so on to the performance of components, devices, machines and systems. In our approach this information is described as ''relations'' by a set of tables which comprise related variables, for example, a set of values about essential properties for materials selection. This approach based on the relational model enables relational operations, i.e. SELECTION, PROJECTION, JOIN and so on, to select suitable materials, to set trade-off parameters for system designers and to establish design criteria. Stored data comprise (i) fundamental properties for all elements and potential structural materials, (ii) low cycle fatigue, irradiation creep and swelling data for type 316 stainless steels. These data have been selected and evaluated from critical reviews of existing data base of about 2 mega bytes data, some examples of materials selections and extraction of trade-off parameters are shown as a subject of critical issue concerning how to bridge the large gap between materials developments and system designs. (author)

Modeling variability in porescale multiphase flow experiments

Science.gov (United States)

Ling, Bowen; Bao, Jie; Oostrom, Mart; Battiato, Ilenia; Tartakovsky, Alexandre M.

2017-07-01

Microfluidic devices and porescale numerical models are commonly used to study multiphase flow in biological, geological, and engineered porous materials. In this work, we perform a set of drainage and imbibition experiments in six identical microfluidic cells to study the reproducibility of multiphase flow experiments. We observe significant variations in the experimental results, which are smaller during the drainage stage and larger during the imbibition stage. We demonstrate that these variations are due to sub-porescale geometry differences in microcells (because of manufacturing defects) and variations in the boundary condition (i.e., fluctuations in the injection rate inherent to syringe pumps). Computational simulations are conducted using commercial software STAR-CCM+, both with constant and randomly varying injection rates. Stochastic simulations are able to capture variability in the experiments associated with the varying pump injection rate.

Experiences of Work-Life Conflict for the Athletic Trainer Employed Outside the National Collegiate Athletic Association Division I Clinical Setting.

Science.gov (United States)

Mazerolle, Stephanie M; Pitney, William A; Eason, Christianne M

2015-07-01

The intercollegiate setting receives much of the scholarly attention related to work-life conflict (WLC). However research has been focused on the National Collegiate Athletic Association Division I setting. Multiple factors can lead to WLC for the athletic trainer (AT), including hours, travel, and lack of flexibility in work schedules. To investigate the experiences of WLC among ATs working in the non-Division I collegiate setting and to identify factors that contribute to fulfillment of work-life balance in this setting. Qualitative study. Institutions in the National Collegiate Athletic Association Divisions II and III, the National Association of Intercollegiate Athletics, and the National Junior College Athletic Association. A total of 244 ATs (128 women, 114 men; age = 37.5 ± 13.3 years, experience = 14 ± 12 years) completed phase I. Thirteen participants (8 women, 5 men; age = 38 ± 13 years, experience = 13.1 ± 11.4 years) completed phase II. For phase I, participants completed a previously validated and reliable (Cronbach α > .90) Web-based survey measuring their levels of WLC and work-family conflict (WFC). This phase included 2 WFC scales defining family; scale 1 defined family as having a partner or spouse with or without children, and scale 2 defined family as those individuals, including parents, siblings, grandparents, and any other close relatives, involved in one's life. Phase II consisted of an interview. Qualitative data were evaluated using content analysis. Data source and multiple-analyst triangulation secured credibility. The WFC scores were 26.33 ± 7.37 for scale 1 and 20.46 ± 10.14 for scale 2, indicating a moderate level of WFC for scale 1 and a low level of WFC for scale 2. Qualitative analyses revealed that organizational dimensions, such as job demands and staffing issues, can negatively affect WLC, whereas a combination of organizational and personal dimensions can positively affect WLC. Overload continues to be a prevalent

D90: The Strongest Contributor to Setting Time in Mineral Trioxide Aggregate and Portland Cement.

Science.gov (United States)

Ha, William N; Bentz, Dale P; Kahler, Bill; Walsh, Laurence J

2015-07-01

The setting times of commercial mineral trioxide aggregate (MTA) and Portland cements vary. It was hypothesized that much of this variation was caused by differences in particle size distribution. Two gram samples from 11 MTA-type cements were analyzed by laser diffraction to determine their particle size distributions characterized by their percentile equivalent diameters (the 10th percentile, the median, and the 90th percentile [d90], respectively). Setting time data were received from manufacturers who performed indentation setting time tests as specified by the standards relevant to dentistry, ISO 6786 (9 respondents) or ISO 9917.1 (1 respondent), or not divulged to the authors (1 respondent). In a parallel experiment, 6 samples of different size graded Portland cements were produced using the same cement clinker. The measurement of setting time for Portland cement pastes was performed using American Society for Testing and Materials C 191. Cumulative heat release was measured using isothermal calorimetry to assess the reactions occurring during the setting of these pastes. In all experiments, linear correlations were assessed between setting times, heat release, and the 3 particle size parameters. Particle size varied considerably among MTA cements. For MTA cements, d90 was the particle size characteristic showing the highest positive linear correlation with setting time (r = 0.538). For Portland cement, d90 gave an even higher linear correlation for the initial setting time (r = 0.804) and the final setting time (r = 0.873) and exhibited a strong negative linear correlation for cumulative heat release (r = 0.901). Smaller particle sizes result in faster setting times, with d90 (the largest particles) being most closely correlated with the setting times of the samples. Copyright © 2015 American Association of Endodontists. All rights reserved.

Benchmark Data Set for Wheat Growth Models: Field Experiments and AgMIP Multi-Model Simulations.

Science.gov (United States)

Asseng, S.; Ewert, F.; Martre, P.; Rosenzweig, C.; Jones, J. W.; Hatfield, J. L.; Ruane, A. C.; Boote, K. J.; Thorburn, P.J.; Rotter, R. P.

2015-01-01

The data set includes a current representative management treatment from detailed, quality-tested sentinel field experiments with wheat from four contrasting environments including Australia, The Netherlands, India and Argentina. Measurements include local daily climate data (solar radiation, maximum and minimum temperature, precipitation, surface wind, dew point temperature, relative humidity, and vapor pressure), soil characteristics, frequent growth, nitrogen in crop and soil, crop and soil water and yield components. Simulations include results from 27 wheat models and a sensitivity analysis with 26 models and 30 years (1981-2010) for each location, for elevated atmospheric CO2 and temperature changes, a heat stress sensitivity analysis at anthesis, and a sensitivity analysis with soil and crop management variations and a Global Climate Model end-century scenario.

Tracer experiment data sets for the verification of local and meso-scale atmospheric dispersion models including topographic effects

International Nuclear Information System (INIS)

Sartori, E.; Schuler, W.

1992-01-01

Software and data for nuclear energy applications are acquired, tested and distributed by several information centres; in particular, relevant computer codes are distributed internationally by the OECD/NEA Data Bank (France) and by ESTSC and EPIC/RSIC (United States). This activity is coordinated among the centres and is extended outside the OECD area through an arrangement with the IAEA. This article proposes more specifically a scheme for acquiring, storing and distributing atmospheric tracer experiment data (ATE) required for verification of atmospheric dispersion models especially the most advanced ones including topographic effects and specific to the local and meso-scale. These well documented data sets will form a valuable complement to the set of atmospheric dispersion computer codes distributed internationally. Modellers will be able to gain confidence in the predictive power of their models or to verify their modelling skills. (au)

Nondestructive characterization of materials damage

International Nuclear Information System (INIS)

Dobmann, G.

1999-01-01

The paper discusses two examples of application of NDT for early detection of materials damage, or ageing effects. The first case shows the potential of micromagnetic testing techniques for early detection of hydrogen-induced stress corrosion cracking in pipework. Pipe specimens made of steel X20Cr13, which differed in materials state induced by various heat treatments, were exposed to corrosive attack induced in a closed cycle by simultaneous rinsing with NACE solution and stress application through stamp impact. Various micromagnetic testing parameters were measured at the specimens' outside surface during the annealing period. Further, fatigue experiments were made with specimen sets made of steel 1.4541, under various mechanical and temperature stresses (room temperature and 300 C), for measuring the remanent magnetization of the cylindrical fatigue test blocks (equal geometry) cut out of the specimens, in order to conclude information on the martensite content and the fatigue effects. (Orig./CB) [de

Constitutive model for porous materials

International Nuclear Information System (INIS)

Weston, A.M.; Lee, E.L.

1982-01-01

A simple pressure versus porosity compaction model is developed to calculate the response of granular porous bed materials to shock impact. The model provides a scheme for calculating compaction behavior when relatively limited material data are available. While the model was developed to study porous explosives and propellants, it has been applied to a much wider range of materials. The early development of porous material models, such as that of Hermann, required empirical dynamic compaction data. Erkman and Edwards successfully applied the early theory to unreacted porous high explosives using a Gruneisen equation of state without yield behavior and without trapped gas in the pores. Butcher included viscoelastic rate dependance in pore collapse. The theoretical treatment of Carroll and Holt is centered on the collapse of a circular pore and includes radial inertia terms and a complex set of stress, strain and strain rate constitutive parameters. Unfortunately data required for these parameters are generally not available. The model described here is also centered on the collapse of a circular pore, but utilizes a simpler elastic-plastic static equilibrium pore collapse mechanism without strain rate dependence, or radial inertia terms. It does include trapped gas inside the pore, a solid material flow stress that creates both a yield point and a variation in solid material pressure with radius. The solid is described by a Mie-Gruneisen type EOS. Comparisons show that this model will accurately estimate major mechanical features which have been observed in compaction experiments

Causal Set Generator and Action Computer

OpenAIRE

Cunningham, William; Krioukov, Dmitri

2017-01-01

The causal set approach to quantum gravity has gained traction over the past three decades, but numerical experiments involving causal sets have been limited to relatively small scales. The software suite presented here provides a new framework for the generation and study of causal sets. Its efficiency surpasses previous implementations by several orders of magnitude. We highlight several important features of the code, including the compact data structures, the $O(N^2)$ causal set generatio...

Aboriginal Australians' experience of social capital and its relevance to health and wellbeing in urban settings.

Science.gov (United States)

Browne-Yung, Kathryn; Ziersch, Anna; Baum, Fran; Gallaher, Gilbert

2013-11-01

Social capital has been linked to physical and mental health. While definitions of social capital vary, all include networks of social relationships and refer to the subsequent benefits and disadvantages accrued to members. Research on social capital for Aboriginal Australians has mainly focused on discrete rural and remote Aboriginal contexts with less known about the features and health and other benefits of social capital in urban settings. This paper presents findings from in-depth interviews with 153 Aboriginal people living in urban areas on their experiences of social capital. Of particular interest was how engagement in bonding and bridging networks influenced health and wellbeing. Employing Bourdieu's relational theory of capital where resources are unequally distributed and reproduced in society we found that patterns of social capital are strongly associated with economic, social and cultural position which in turn reflects the historical experiences of dispossession and disadvantage experienced by Aboriginal Australians. Social capital was also found to both reinforce and influence Aboriginal cultural identity, and had both positive and negative impacts on health and wellbeing. Copyright © 2013 Elsevier Ltd. All rights reserved.

Prospective Validation of the Decalogue, a Set of Doctor-Patient Communication Recommendations to Improve Patient Illness Experience and Mood States within a Hospital Cardiologic Ambulatory Setting

Directory of Open Access Journals (Sweden)

Piercarlo Ballo

2017-01-01

Full Text Available Strategies to improve doctor-patient communication may have a beneficial impact on patient’s illness experience and mood, with potential favorable clinical effects. We prospectively tested the psychometric and clinical validity of the Decalogue, a tool utilizing 10 communication recommendations for patients and physicians. The Decalogue was administered to 100 consecutive patients referred for a cardiologic consultation, whereas 49 patients served as controls. The POMS-2 questionnaire was used to measure the total mood disturbance at the end of the consultation. Structural equation modeling showed high internal consistency (Cronbach alpha 0.93, good test-retest reproducibility, and high validity of the psychometric construct (all > 0.80, suggesting a positive effect on patients’ illness experience. The total mood disturbance was lower in the patients exposed to the Decalogue as compared to the controls (1.4±12.1 versus 14.8±27.6, p=0.0010. In an additional questionnaire, patients in the Decalogue group showed a trend towards a better understanding of their state of health (p=0.07. In a cardiologic ambulatory setting, the Decalogue shows good validity and reliability as a tool to improve patients’ illness experience and could have a favorable impact on mood states. These effects might potentially improve patient engagement in care and adherence to therapy, as well as clinical outcome.

Nanocomposite materials: From lab-scale experiments to prototypes

NARCIS (Netherlands)

Dortmans, A.; Batenburg, L.F.; Koster, T.P.M.; Nelissen, R.G.; Fischer, H.

2002-01-01

A porous PMMA material has been reinforced by clay particles, and properties of the resulting material were evaluated. The clay has been intercalated in a first step by melt-extrusion with a suitable block copolymer. A radical polymerisation reaction after swelling of the intercalated clay with

Evaluation of one-dimensional and two-dimensional volatility basis sets in simulating the aging of secondary organic aerosol with smog-chamber experiments.

Science.gov (United States)

Zhao, Bin; Wang, Shuxiao; Donahue, Neil M; Chuang, Wayne; Hildebrandt Ruiz, Lea; Ng, Nga L; Wang, Yangjun; Hao, Jiming

2015-02-17

We evaluate the one-dimensional volatility basis set (1D-VBS) and two-dimensional volatility basis set (2D-VBS) in simulating the aging of SOA derived from toluene and α-pinene against smog-chamber experiments. If we simulate the first-generation products with empirical chamber fits and the subsequent aging chemistry with a 1D-VBS or a 2D-VBS, the models mostly overestimate the SOA concentrations in the toluene oxidation experiments. This is because the empirical chamber fits include both first-generation oxidation and aging; simulating aging in addition to this results in double counting of the initial aging effects. If the first-generation oxidation is treated explicitly, the base-case 2D-VBS underestimates the SOA concentrations and O:C increase of the toluene oxidation experiments; it generally underestimates the SOA concentrations and overestimates the O:C increase of the α-pinene experiments. With the first-generation oxidation treated explicitly, we could modify the 2D-VBS configuration individually for toluene and α-pinene to achieve good model-measurement agreement. However, we are unable to simulate the oxidation of both toluene and α-pinene with the same 2D-VBS configuration. We suggest that future models should implement parallel layers for anthropogenic (aromatic) and biogenic precursors, and that more modeling studies and laboratory research be done to optimize the "best-guess" parameters for each layer.

Application of simulation experiments to fusion materials development

International Nuclear Information System (INIS)

Nolfi, F.V. Jr.; Li, C.Y.

1978-01-01

One of the major problems in the development of structural alloys for use in magnetic fusion reactors (MFRs) is the lack of suitable materials testing facilities. This is because operating fusion reactors, even of the experimental size, do not exist. A primary task in the early stages of MFR alloy development will be to adapt currently available irradiation facilities for use in materials development. Thus, it is generally recognized that, at least for the next ten years, studies of irradiation effects in an MFR environment on the microstructure and mechanical properties of structural materials must utilize ion and fission neutron simulations. Special problems will arise because, in addition to displacement damage, an MFR radiation environment will produce, in candidate structural materials, higher and more significant concentrations of gaseous nuclear transmutation products, e.g., helium and hydrogen, than found in a fast breeder reactor. These effects must be taken into account when simulation techniques are employed, since they impact heavily on irradiation microstructure development and, hence, mechanical properties

Changes in setting time of alginate impression material with different water temperature

Directory of Open Access Journals (Sweden)

Decky J. Indrani

2013-03-01

Full Text Available Background: Previous studies showed that setting process of alginates can be influenced by temperature. Purpose: To determine the changes in setting time due to differences in water temperature and to determine the correlation between water temperature and the setting time. Methods: Seven groups of dough alginate were prepared by mixing alginate powder and water, each using a temperature between 13° C–28° C with a interval of 2.5° C. A sample mold (Θ = 30 mm, t = 16 mm was placed on a flat plate and filled with doug alginate. Immediately the flat end of a polished acrylic rod was placed in contact with the surface of dough alginate. Setting time of alginat was measured from the starting of the mix to the time when the alginate does not adhere to the end of the rod. Setting time alginate data were analyzed using one way ANOVA, LSD and Pearson. Results: Setting time of alginate with water temperature between 13° C–28° C were 87 to 119.4 seconds and were significantly different (p < 0.01. The setting time between group were also significantly different (p<0.01. There was an inverse correlation between water temperature and the setting time (r = -0.968. Conclusion: Water temperature between 13° C–28°C with a difference of 2.5° C produced significant differences in alginate setting time; the lower the water temperature being used the longer the setting time was produced.Latar belakang: Penelitian-penelitian sebelumnya menunjukkan bahwa proses pengerasan alginat dapat dipengaruhi oleh suhu. Tujuan: Mengetahui perubahan waktu pengerasan alginat akibat perbedaan suhu air serta mengetahui hubungan antara suhu air dan waktu pengerasan. Metode: Tujuh kelompok adonan alginat yang dipersiapkan dengan mencampur bubuk alginat dan air, masingmasing menggunakan suhu antara 13°C–28° C dengan interval 2,5° C. Pengukuran waktu pengerasan alginat dilakukan sesuai dengan spesifikasi ADA no.18. Sebuah cetakan sampel terbuat dari pralon berbentuk

Influence of transmutation and high neutron exposure on materials used in fission-fusion correlation experiments

International Nuclear Information System (INIS)

Garner, F.A.

1990-07-01

This paper explores the response of three different materials to high fluence irradiation as observed in recent fusion-related experiments. While helium at fusion-relevant levels influences the details of the microstructure of Fe--Cr--Ni alloys somewhat, the resultant changes in swelling and tensile behavior are relatively small. Under conditions where substantially greater-than-fusion levels of helium are generated, however, an extensive refinement of microstructure can occur, leading to depression of swelling at lower temperatures and increased strengthening at all temperatures studied. The behavior of these alloys is dominated by their tendency to converge to saturation microstructures which encourage swelling. Irradiations of nickel are dominated by its tendency to develop a different type of saturation microstructure that discourages further void growth. Swelling approaches saturation levels that are remarkably insensitive to starting microstructure and irradiation temperature. The rate of approach to saturation is very sensitive to variables such as helium, impurities, dislocation density and displacement rate, however. Copper exhibits a rather divergent response depending on the property measured. Transmutation of copper to nickel and zinc plays a large role in determining electrical conductivity but almost no role in void swelling. Each of these three materials offers different challenges in the interpretation of fission-fusion correlation experiments

Deformation of volcanic materials by pore pressurization: analog experiments with simplified geometry

Science.gov (United States)

Hyman, David; Bursik, Marcus

2018-03-01

The pressurization of pore fluids plays a significant role in deforming volcanic materials; however, understanding of this process remains incomplete, especially scenarios accompanying phreatic eruptions. Analog experiments presented here use a simple geometry to study the mechanics of this type of deformation. Syrup was injected into the base of a sand medium, simulating the permeable flow of fluids through shallow volcanic systems. The experiments examined surface deformation over many source depths and pressures. Surface deformation was recorded using a Microsoft® Kinect™ sensor, generating high-spatiotemporal resolution lab-scale digital elevation models (DEMs). The behavior of the system is controlled by the ratio of pore pressure to lithostatic loading (λ =p/ρ g D). For λ 10, fluid expulsion from the layer was much faster, vertically fracturing to the surface with larger pressure ratios yielding less deformation. The temporal behavior of deformation followed a characteristic evolution that produced an approximately exponential increase in deformation with time until complete layer penetration. This process is distinguished from magmatic sources in continuous geodetic data by its rapidity and characteristic time evolution. The time evolution of the experiments compares well with tilt records from Mt. Ontake, Japan, in the lead-up to the deadly 2014 phreatic eruption. Improved understanding of this process may guide the evolution of magmatic intrusions such as dikes, cone sheets, and cryptodomes and contribute to caldera resurgence or deformation that destabilizes volcanic flanks.

Advanced insider threat mitigation workshop instructional materials

Energy Technology Data Exchange (ETDEWEB)

Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Larsen, Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); O Brien, Mike [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Edmunds, Tom [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2008-11-01

Insiders represent a formidable threat to nuclear facilities. This set of workshop materials covers methodologies to analyze and approaches to mitigate the threat of an insider attempting abrupt and protracted theft of nuclear materials. This particular set of materials is a n update of a January 2008 version to add increased emphasis on Material Control and Accounting and its role with respect to protracted insider nuclear material theft scenarios.

The use of differential scanning calorimetry for the evaluation of dental materials. I. Cements, cavity lining materials and anterior restorative materials.

Science.gov (United States)

McCabe, J F; Wilson, H J

1980-03-01

Thermal changes occurring during the setting of restorative materials have been measured accurately using a differential scanning calorimeter. The results were used to evaluate setting characteristics. The heat of reaction and rate of heat output may be significant in determining thermal damage to the pulp. The heat capacity is related to thermal insulation properties. These properties have been determined and their effect on the efficacy of restorative materials discussed.

Design Of A Novel Online Experiment Setup For PID Controller Applications

Directory of Open Access Journals (Sweden)

Sezgin Kaçar

2017-02-01

Full Text Available In this study, an internet based remote access experiment setup was developed for induction direct current motor speed control with PID controller which can be used as a support material in engineering education. The experiment setup is wireless and communicates with the remote server using transfer control protocol/internet protocol through a wireless ADSL modem. Users can perform the experiments as real time accessing the web pages in the remote server by using any computer which has internet connection. By means of interactively-designed web pages, users can monitor the speed change executing alterations of the PID controller parameter and motor reference speed. Also users can save the measured values on their own computers. In addition to this, with the support of a webcam, the running of the experimental set can be monitored on the web page. Additionally, for the experimental set, preparing the peripheral units card, the interaction was expanded between the user and the experimental set. Relatively to this, the user can monitor the ambient temperature of the experimental set’s current place on the web page and can make his/her own message write on LCD of the experimental set and can enlighten it if he/she wants.

Set of Frequent Word Item sets as Feature Representation for Text with Indonesian Slang

Science.gov (United States)

Sa'adillah Maylawati, Dian; Putri Saptawati, G. A.

2017-01-01

Indonesian slang are commonly used in social media. Due to their unstructured syntax, it is difficult to extract their features based on Indonesian grammar for text mining. To do so, we propose Set of Frequent Word Item sets (SFWI) as text representation which is considered match for Indonesian slang. Besides, SFWI is able to keep the meaning of Indonesian slang with regard to the order of appearance sentence. We use FP-Growth algorithm with adding separation sentence function into the algorithm to extract the feature of SFWI. The experiments is done with text data from social media such as Facebook, Twitter, and personal website. The result of experiments shows that Indonesian slang were more correctly interpreted based on SFWI.

PREFACE: Advanced Materials for Demanding Applications

Science.gov (United States)

McMillan, Alison; Schofield, Stephen; Kelly, Michael

2015-02-01

This was a special conference. It was small enough (60+ delegates) but covering a wide range of topics, under a broad end-use focussed heading. Most conferences today either have hundreds or thousands of delegates or are small and very focussed. The topics ranged over composite materials, the testing of durability aspects of materials, and an eclectic set of papers on radar screening using weak ionized plasmas, composites for microvascular applications, composites in space rockets, and materials for spallation neutron sources etc. There were several papers of new characterisation techniques and, very importantly, several papers that started with the end-user requirements leading back into materials selection. In my own area, there were three talks about the technology for the ultra-precise positioning of individual atoms, donors, and complete monolayers to take modern electronics and optoelectronics ideas closer to the market place. The President of the Institute opened with an experience-based talk on translating innovative technology into business. Everyone gave a generous introduction to bring all-comers up to speed with the burning contemporary issues. Indeed, I wish that a larger cohort of first-year engineering PhD students were present to see the full gamut of what takes a physics idea to a success in the market place. I would urge groups to learn from Prof Alison McMillan (a Vice President of the Institute of Physics) and Steven Schofield, to set up conferences of similar scale and breadth. I took in more than I do from mega-meetings, and in greater depth. Professor Michael Kelly Department of Engineering University of Cambridge

The mechanical spectra of deposited materials by a composite reed vibration method

International Nuclear Information System (INIS)

Ying, X.N.; Zhang, L.; Yuan, Y.H.

2010-01-01

Recently a composite reed vibration method has been designed to measure the mechanical spectra (complex Young's modulus) of materials from liquid to solid state. The mechanical spectra of materials can be obtained from a composite system consisting of a substrate reed and of materials deposited on it. In this report, two sets of formulas to calculate the mechanical spectra of deposited materials are further analyzed. The proof is given for the previous named 'approximate formulas' (labeled as Formula II). Then the composite reed vibration method can be safely used as an extension of the mechanical spectrum method of the thin solid film. At the same time, some comments are made on previous analytical formulas (labeled as Formula I). At last, more experiments with a small amount of deposited materials are performed. It is found that smaller quantity is more favorable to achieve the intrinsic mechanical spectra of deposited materials.

Disruption simulation experiments in a pulsed plasma accelerator - energy absorption and damage evolution on plasma facing materials

International Nuclear Information System (INIS)

Bolt, H.; Barabash, V.; Gervash, A.; Linke, J.; Lu, L.P.; Ovchinnikov, I.; Roedig, M.

1995-01-01

Plasma accelerators are used as test beds for disruption simulation experiments on plasma facing materials, because the incident energy fluxes and the discharge duration are of similar order as those expected during disruptions in ITER. The VIKA facility was used for the testing of materials under incident energies up to 5 kJ/cm 2 . Different carbon materials, SiC, stainless steel, TZM and tungsten have been tested. From the experimental results a scaling of the ablation with incident energy density was derived. The resulting ablation depth on carbon materials is roughly 2 μm per kJcm -2 of incident energy density. For metals this ablation is much higher due to the partial loss of the melt layer from splashing. For stainless steel an ablation depth of 9.5 μm per kJcm -2 was determined. The result of a linear scaling of the ablation depth with incident energy density is consistent with a previous calorimetric study. (orig.)

Experiences of mental health professionals and patients in the use of pro re nata medication in acute adult mental healthcare settings: a systematic review.

Science.gov (United States)

Morkunas, Bernadette; Porritt, Kylie; Stephenson, Matthew

2016-10-01

The use of pro re nata (PRN) medication, a medication that is given when needed, as opposed to medication that is given at a regular time, is surrounded by claims of misuse and poor accountability within the mental health setting. Gaining insight into and understanding of the experiences of health professionals' and patients' use of PRN medication will assist in contributing to improving education and safety around this common intervention. To analyze and synthesize the best available evidence on the perspectives of patients and mental health professionals (MHPs) with their experiences of PRN medication in mental health settings. Participants considered for inclusion in this review include MHPs working in, and adult patients admitted to, an acute adult mental healthcare setting. This review will consider studies that investigated the experience of MHPs' and patients' use of PRN medication in acute adult mental healthcare settings. The current review will consider studies that focused on qualitative data including, but not limited to, designs such as phenomenology, grounded theory, ethnography, action research and feminist research. The context of the review is acute adult mental healthcare settings with no restriction on geographical location. The search strategy aims to find both published and unpublished studies. The databases searched include CINAHL, PubMed, Scopus, PsycINFO and Embase. A gray literature search included ProQuest Dissertations and Theses, Mednar and Google Scholar. Papers selected for retrieval were assessed by two independent reviewers for methodological validity before inclusion in the review using the standardized critical appraisal instrument from the Joanna Briggs Institute Qualitative Assessment and Review Instrument (JBI-QARI). The standardized data extraction tool from the JBI-QARI was used to extract data from the papers. Qualitative research findings were pooled using the JBI-QARI. This involved the aggregation of findings to generate a

Radiopurity control in the NEXT-100 double beta decay experiment: procedures and initial measurements

International Nuclear Information System (INIS)

Álvarez, V; Cárcel, S; Cervera, A; Díaz, J; Ferrario, P; Bandac, I; Bettini, A; Castel, J; Cebrián, S; Dafni, T; Borges, F I G M; Conde, C A N; Dias, T H V T; Fernandes, L M P; Freitas, E D C; Egorov, M; Gehman, V M; Esteve, R; Evtoukhovitch, P; Ferreira, A L

2013-01-01

The ''Neutrino Experiment with a Xenon Time-Projection Chamber'' (NEXT) is intended to investigate the neutrinoless double beta decay of 136 Xe, which requires a severe suppression of potential backgrounds. An extensive screening and material selection process is underway for NEXT since the control of the radiopurity levels of the materials to be used in the experimental set-up is a must for rare event searches. First measurements based on Glow Discharge Mass Spectrometry and gamma-ray spectroscopy using ultra-low background germanium detectors at the Laboratorio Subterr and apos;aneo de Canfranc (Spain) are described here. Activity results for natural radioactive chains and other common radionuclides are summarized, being the values obtained for some materials like copper and stainless steel very competitive. The implications of these results for the NEXT experiment are also discussed.

Experiences of stigma in healthcare settings among adults living with HIV in the Islamic Republic of Iran.

Science.gov (United States)

Rahmati-Najarkolaei, Fatemeh; Niknami, Shamsaddin; Aminshokravi, Farkhondeh; Bazargan, Mohsen; Ahmadi, Fazlollah; Hadjizadeh, Ebrahim; Tavafian, Sedigheh S

2010-07-22

People living with HIV (PLHIV) sometimes experience discrimination. There is little understanding of the causes, forms and consequences of this stigma in Islamic countries. This qualitative study explored perceptions and experiences of PLHIV regarding both the quality of healthcare and the attitudes and behaviours of their healthcare providers in the Islamic Republic of Iran. In-depth, semi-structured interviews were held with a purposively selected group of 69 PLHIV recruited from two HIV care clinics in Tehran. Data were analyzed using the content analysis approach. Nearly all participants reported experiencing stigma and discrimination by their healthcare providers in a variety of contexts. Participants perceived that their healthcare providers' fear of being infected with HIV, coupled with religious and negative value-based assumptions about PLHIV, led to high levels of stigma. Participants mentioned at least four major forms of stigma: (1) refusal of care; (2) sub-optimal care; (3) excessive precautions and physical distancing; and (4) humiliation and blaming. The participants' healthcare-seeking behavioural reactions to perceived stigma and discrimination included avoiding or delaying seeking care, not disclosing HIV status when seeking healthcare, and using spiritual healing. In addition, emotional responses to perceived acts of stigma included feeling undeserving of care, diminished motivation to stay healthy, feeling angry and vengeful, and experiencing emotional stress. While previous studies demonstrate that most Iranian healthcare providers report fairly positive attitudes towards PLHIV, our participants' experiences tell a different story. Therefore, it is imperative to engage both healthcare providers and PLHIV in designing interventions targeting stigma in healthcare settings. Additionally, specialized training programmes in universal precautions for health providers will lead to stigma reduction. National policies to strengthen medical training and

A Pilot Examination of the Methods Used to Counteract Insider Threat Security Risks Associated with the Use of Radioactive Materials in the Research and Clinical Setting.

Science.gov (United States)

Tsenov, B G; Emery, R J; Whitehead, L W; Gonzalez, J Reingle; Gemeinhardt, G L

2018-03-01

While many organizations maintain multiple layers of security control methodologies to prevent outsiders from gaining unauthorized access, persons such as employees or contractors who have been granted legitimate access can represent an "insider threat" risk. Interestingly, some of the most notable radiological events involving the purposeful contamination or exposure of individuals appear to have been perpetrated by insiders. In the academic and medical settings, radiation safety professionals focus their security efforts on (1) ensuring controls are in place to prevent unauthorized access or removal of sources, and (2) increasing security controls for the unescorted accessing of large sources of radioactivity (known as "quantities of concern"). But these controls may not completely address the threat insiders represent when radioactive materials below these quantities are present. The goal of this research project was to characterize the methodologies currently employed to counteract the insider security threat for the misuse or purposeful divergence of radioactive materials used in the academic and medical settings. A web-based survey was used to assess how practicing radiation safety professionals in academic and medical settings anticipate, evaluate, and control insider threat security risks within their institutions. While all respondents indicated that radioactive sources are being used in amounts below quantities of concern, only 6 % consider insider threat security issues as part of the protocol review for the use of general radioactive materials. The results of this survey identify several opportunities for improvement for institutions to address security gaps.

2169 steel waveform experiments.

Energy Technology Data Exchange (ETDEWEB)

Furnish, Michael David; Alexander, C. Scott; Reinhart, William Dodd; Brown, Justin L.

2012-11-01

In support of LLNL efforts to develop multiscale models of a variety of materials, we have performed a set of eight gas gun impact experiments on 2169 steel (21% Cr, 6% Ni, 9% Mn, balance predominantly Fe). These experiments provided carefully controlled shock, reshock and release velocimetry data, with initial shock stresses ranging from 10 to 50 GPa (particle velocities from 0.25 to 1.05 km/s). Both windowed and free-surface measurements were included in this experiment set to increase the utility of the data set, as were samples ranging in thickness from 1 to 5 mm. Target physical phenomena included the elastic/plastic transition (Hugoniot elastic limit), the Hugoniot, any phase transition phenomena, and the release path (windowed and free-surface). The Hugoniot was found to be nearly linear, with no indications of the Fe phase transition. Releases were non-hysteretic, and relatively consistent between 3- and 5-mmthick samples (the 3 mm samples giving slightly lower wavespeeds on release). Reshock tests with explosively welded impactors produced clean results; those with glue bonds showed transient releases prior to the arrival of the reshock, reducing their usefulness for deriving strength information. The free-surface samples, which were steps on a single piece of steel, showed lower wavespeeds for thin (1 mm) samples than for thicker (2 or 4 mm) samples. A configuration used for the last three shots allows release information to be determined from these free surface samples. The sample strength appears to increase with stress from ~1 GPa to ~ 3 GPa over this range, consistent with other recent work but about 40% above the Steinberg model.

Normalization Methods and Selection Strategies for Reference Materials in Stable Isotope Analyes. Review

Energy Technology Data Exchange (ETDEWEB)

Skrzypek, G. [West Australian Biogeochemistry Centre, John de Laeter Centre of Mass Spectrometry, School of Plant Biology, University of Western Australia, Crawley (Australia); Sadler, R. [School of Agricultural and Resource Economics, University of Western Australia, Crawley (Australia); Paul, D. [Department of Civil Engineering (Geosciences), Indian Institute of Technology Kanpur, Kanpur (India); Forizs, I. [Institute for Geochemical Research, Hungarian Academy of Sciences, Budapest (Hungary)

2013-07-15

Stable isotope ratio mass spectrometers are highly precise, but not accurate instruments. Therefore, results have to be normalized to one of the isotope scales (e.g., VSMOW, VPDB) based on well calibrated reference materials. The selection of reference materials, numbers of replicates, {delta}-values of these reference materials and normalization technique have been identified as crucial in determining the uncertainty associated with the final results. The most common normalization techniques and reference materials have been tested using both Monte Carlo simulations and laboratory experiments to investigate aspects of error propagation during the normalization of isotope data. The range of observed differences justifies the need to employ the same sets of standards worldwide for each element and each stable isotope analytical technique. (author)

Experiments to quantify airborne release from packages with dispersible radioactive materials under accident conditions

Energy Technology Data Exchange (ETDEWEB)

Martens, R.; Lange, F. [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) mbH, Schwertnergasse 1, 50667 Koeln (Germany); Koch, W.; Nolte, O. [Fraunhofer-Institut fuer Toxikologie und Experimentelle Medizin (ITEM), Nikolai-Fuchs-Str.1, 30625 Hannover (Germany)

2005-07-01

For transport or handling accidents involving packages with radioactive materials and the assessment of potential radiological consequences, for the review of current requirements of the IAEA Transport Regulations, and for their possible further development reliable release data following mechanical impact are required. Within this context a research project was carried out which extends the basis for a well-founded examination of the contemporary system of requirements of 'Low Specific Activity' (LSA)-type materials and allows for its further development where appropriate. This project comprises a prior system-analytical examination and an experimental programme aiming at improving the general physical understanding of the release process as well as the quantity and the characteristics of airborne released material for non-fixed dispersible LSA-II material upon mechanical impact. Impaction experiments applying small, medium and real sized specimens of different dispersible materials revealed that the release behaviour of dispersible powders strongly depends upon material properties, e.g. particle size distribution and cohesion forces. The highest experimentally determined release fraction of respirable mass (AED < 10 {mu}m) amounted to about 2 % and was obtained for 2 kg of un-contained easily dispersible pulverized fly ash (PFA). For larger un-contained PFA specimen the release fraction decreases. However, packaging containing powdery material substantially reduces the airborne release fraction. The measured airborne release fractions for a 200 l drum with Type A certificate containing PFA were about a factor of 50 to 100 lower than for un-contained material. For a drop height of 9 m the airborne release fraction amounted to about 4 x 10{sup -5}. This value should be applicable for most of transport and handling accidents with mechanical impact. For a metal container of Type IP-2 or better which contains powder masses of 100 kg or more this release

Set theoretical aspects of real analysis

CERN Document Server

Kharazishvili, Alexander B

2014-01-01

This book addresses a number of questions in real analysis and classical measure theory that are of a set-theoretic flavor. Accessible to graduate students, the beginning of the book presents introductory topics on real analysis and Lebesque measure theory. These topics highlight the boundary between fundamental concepts of measurability and non-measurability for point sets and functions. The remainder of the book deals with more specialized material on set-theoretical real analysis. Problems are included at the end of each chapter.

Materials Science | NREL

Science.gov (United States)

microscopy and imaging science, interfacial and surface science, materials discovery, and thin-film material Science Materials Science Illustration with bottom row showing a ball-and-stick model and top row dense black band. State-of-the-art advances in materials science come from a combination of experiments

Random sets and random fuzzy sets as ill-perceived random variables an introduction for Ph.D. students and practitioners

CERN Document Server

Couso, Inés; Sánchez, Luciano

2014-01-01

This short book provides a unified view of the history and theory of random sets and fuzzy random variables, with special emphasis on its use for representing higher-order non-statistical uncertainty about statistical experiments. The authors lay bare the existence of two streams of works using the same mathematical ground, but differing form their use of sets, according to whether they represent objects of interest naturally taking the form of sets, or imprecise knowledge about such objects. Random (fuzzy) sets can be used in many fields ranging from mathematical morphology, economics, artificial intelligence, information processing and statistics per se, especially in areas where the outcomes of random experiments cannot be observed with full precision. This book also emphasizes the link between random sets and fuzzy sets with some techniques related to the theory of imprecise probabilities. This small book is intended for graduate and doctoral students in mathematics or engineering, but also provides an i...

Comparative analysis of calculations and experiment for uranium-graphite lattices with natural and slightly-enriched uranium

International Nuclear Information System (INIS)

Khrennikov, N.N.; Shchukin, A.V.

1988-01-01

Three sets of experiments carried out at different times and in different laboratories on measuring the material parameter for uranium-graphite lattices using natural and slightly enriched uranium are analyzed. Comparison with the calculations by the TRIFOGR and MCU (the Monte Carlo method) codes reveals resonable agreement between the calculation and experiment (of the order of 0.4% in K eff ). 17 refs.; 3 tabs

Sediment fingerprinting experiments to test the sensitivity of multivariate mixing models

Science.gov (United States)

Gaspar, Leticia; Blake, Will; Smith, Hugh; Navas, Ana

2014-05-01

Sediment fingerprinting techniques provide insight into the dynamics of sediment transfer processes and support for catchment management decisions. As questions being asked of fingerprinting datasets become increasingly complex, validation of model output and sensitivity tests are increasingly important. This study adopts an experimental approach to explore the validity and sensitivity of mixing model outputs for materials with contrasting geochemical and particle size composition. The experiments reported here focused on (i) the sensitivity of model output to different fingerprint selection procedures and (ii) the influence of source material particle size distributions on model output. Five soils with significantly different geochemistry, soil organic matter and particle size distributions were selected as experimental source materials. A total of twelve sediment mixtures were prepared in the laboratory by combining different quantified proportions of the Kruskal-Wallis test, Discriminant Function Analysis (DFA), Principal Component Analysis (PCA), or correlation matrix). Summary results for the use of the mixing model with the different sets of fingerprint properties for the twelve mixed soils were reasonably consistent with the initial mixing percentages initially known. Given the experimental nature of the work and dry mixing of materials, geochemical conservative behavior was assumed for all elements, even for those that might be disregarded in aquatic systems (e.g. P). In general, the best fits between actual and modeled proportions were found using a set of nine tracer properties (Sr, Rb, Fe, Ti, Ca, Al, P, Si, K, Si) that were derived using DFA coupled with a multivariate stepwise algorithm, with errors between real and estimated value that did not exceed 6.7 % and values of GOF above 94.5 %. The second set of experiments aimed to explore the sensitivity of model output to variability in the particle size of source materials assuming that a degree of

Feasibility of the Participatory Experience Survey and the Setting Affordances Survey for use in evaluation of programmes serving youth with intellectual and developmental disabilities.

Science.gov (United States)

Liljenquist, K; Coster, W; Kramer, J; Rossetti, Z

2017-07-01

Participation by youth with disabilities in recreational activities has been shown to promote the development of important skills needed for transition to adulthood. The Participatory Experience Survey (PES) and the Setting Affordances Survey (SAS) were developed for use by recreational programmes serving youth with significant intellectual and developmental disabilities (SIDD) to assess participant experiences and ensure that participants are afforded optimal opportunities to develop these skills. This paper presents a feasibility evaluation to determine the appropriateness of the PES and the SAS for use in a programme evaluation context. The PES and the SAS were used to evaluate a programme serving youth with SIDD in the greater northwest region of the United States. Three recreational activities were evaluated: an art project, trip to a zoo and a track practice. Programme volunteers used the SAS to assess opportunities and affordances offered within each activity. The PES was then given to 10 young people in each activity to capture their experiences. It was hypothesized that each setting would afford different experiences and developmental opportunities because of the differing nature of the activities. The PES and SAS were found to be feasible for conducting a programme evaluation. All three settings offered varying types of experiences and affordances. Notably, as measured by the SAS, opportunity for skill development was greater in more structured activities; the zoo had the fewest opportunities for skill development and the art project had the most skill development opportunities. Youth answered 'no' most often to 'asking for help' and 'helping a kid', suggesting changes to offer more opportunities to develop these skills would be beneficial in all three activities. These new instruments offer programmes a means to more fully include young people with disabilities during programme evaluations, leading to better-structured, more supportive programmes. �

Development of phase-contrast imaging technique for material science and medical science applications

International Nuclear Information System (INIS)

Kashyap, Y.S.; Roy, Tushar; Sarkar, P.S; Shukla, Mayank; Yadav, P.S; Sinha, Amar; Verma, Vishnu; Ghosh, A.K.

2007-07-01

In-line phase contrast imaging technique is an emerging method for study of materials such as carbon fibres, carbon composite materials, polymers etc. These represent the class of materials for which x-ray attenuation cross-section is very small. Similarly, this technique is also well suited for imaging of soft materials such as tissues, distinguishing between tumour and normal tissue. Thus this method promises a far better contrast for low x-ray absorbing substances than the conventional radiography method for material and medical science applications. Though the conventional radiography technique has been carried out for decades, the phase-imaging technique is being demonstrated for the first time within, the country. We have set up an experimental facility for phase contrast imaging using a combination of x-ray CCD detector and a microfocus x-ray source. This facility is dedicated for micro-imaging experiments such as micro-tomography and high resolution phase contrast experiments. In this report, the results of phase contrast imaging using microfocus source and ELETTRA, synchrotron source are discussed. We have also discussed the basic design and heat load calculation for upcoming imaging beamline at Indus-II, RRCAT, Indore. (author)

Collimator settings and performance in 2011 and 2012

International Nuclear Information System (INIS)

Bruce, R.; Assmann, R.W.; Burkart, F.; Cauchi, M.; Deboy, D.; Lari, L.; Redaelli, S; Rossi, A.; Salvachua, B.; Valentino, G.; Wollmann, D.

2012-01-01

Collimator settings and performance are key parameters for deciding the reach in intensity and β* in order to conclude on possible limits for the 2012 run, a summary is first given of the relevant running experience in 2011 and the collimation-related MDs. These include among others tight collimator settings, a quench test, and aperture measurements. Based on the 2011 experience, we conclude on possible running scenarios for 2012 in terms of collimator settings, intensity and β* from the collimation point of view. (authors)

Collimation settings and performance in 2011 and 2012

Energy Technology Data Exchange (ETDEWEB)

Bruce, R; Assmann, R W; Burkart, F; Cauchi, M; Deboy, D; Lari, L; Redaelli, S; Rossi, A; Salvachua, B; Valentino, G; Wollmann, D [European Organization for Nuclear Research, Geneva (Switzerland)

2012-07-01

Collimator settings and available aperture are key parameters for deciding the reach in intensity and β*. In order to conclude on possible limits for the 2012 run, a summary is first given of the relevant running experience in 2011 and the collimation-related MDs. These include among others tight collimator settings, a quench test, and aperture measurements. Based on the 2011 experience, we conclude on possible running scenarios for 2012 in terms of collimator settings, intensity and β* from the collimation point of view.

Collimation settings and performance in 2011 and 2012

CERN Document Server

Bruce, R; Burkart, F; Cauchi, M; Deboy, D; Lari, L; Redaelli, S; Rossi, A; Salvachua, B; Valentino, G; Wollmann, D

2012-01-01

Collimator settings and available aperture are key parameters for deciding the reach in intensity and β*. In order to conclude on possible limits for the 2012 run, a summary is first given of the relevant running experience in 2011 and the collimation-related MDs. These include among others tight collimator settings, a quench test, and aperture measurements. Based on the 2011 experience, we conclude on possible running scenarios for 2012 in terms of collimator settings, intensity and β* from the collimation point of view.

Coupled heat transfer model and experiment study of semitransparent barrier materials in aerothermal environment

Science.gov (United States)

Wang, Da-Lin; Qi, Hong

Semi-transparent materials (such as IR optical windows) are widely used for heat protection or transfer, temperature and image measurement, and safety in energy , space, military, and information technology applications. They are used, for instance, ceramic coatings for thermal barriers of spacecrafts or gas turbine blades, and thermal image observation under extreme or some dangerous environments. In this paper, the coupled conduction and radiation heat transfer model is established to describe temperature distribution of semitransparent thermal barrier medium within the aerothermal environment. In order to investigate this numerical model, one semi-transparent sample with black coating was considered, and photothermal properties were measured. At last, Finite Volume Method (FVM) was used to solve the coupled model, and the temperature responses from the sample surfaces were obtained. In addition, experiment study was also taken into account. In the present experiment, aerodynamic heat flux was simulated by one electrical heater, and two experiment cases were designed in terms of the duration of aerodynamic heating. One case is that the heater irradiates one surface of the sample continually until the other surface temperature up to constant, and the other case is that the heater works only 130 s. The surface temperature responses of these two cases were recorded. Finally, FVM model of the coupling conduction-radiation heat transfer was validated based on the experiment study with relative error less than 5%.

ANALYSIS OF FORMING TREAD WHEEL SETS

Directory of Open Access Journals (Sweden)

Igor IVANOV

2017-09-01

Full Text Available This paper shows the results of a theoretical study of profile high-speed grinding (PHSG for forming tread wheel sets during repair instead of turning and mold-milling. Significant disadvantages of these methods are low capacity to adapt to the tool and inhomogeneous structure of the wheel material. This leads to understated treatment regimens and difficulties in recovering wheel sets with thermal and mechanical defects. This study carried out modeling and analysis of emerging cutting forces. Proposed algorithms describe the random occurrence of the components of the cutting forces in the restoration profile of wheel sets with an inhomogeneous structure of the material. To identify the statistical features of randomly generated structures fractal dimension and the method of random additions were used. The multifractal spectrum formed is decomposed into monofractals by wavelet transform. The proposed method allows you to create the preconditions for controlling the parameters of the treatment process.

BellTest and CHSH experiments with more than two settings

Energy Technology Data Exchange (ETDEWEB)

Basoalto, R M; Percival, I C [Department of Physics, Queen Mary University of London, Mile End Road, London E1 4NS (United Kingdom)

2003-07-04

Strong nonlocality allows signals faster than light. Weak nonlocality is a statistical property of classical events for which there is no realistic local theory. This requires the violation of at least one general Bell inequality. The theory of ideal quantum measurements predicts weak nonlocality but not strong nonlocality. Bell experiment here refers to any experiment designed to demonstrate weak nonlocality. BellTest is a computer program generally available on the Web to help planning and analysis of such Bell experiments. In Mode 1 it obtains general Bell inequalities. In Mode 2 it tests for their violation. We describe its use, with some new results for illustration.

Experience of quality control for material accountancy analysis in Pu fuel facility

International Nuclear Information System (INIS)

Sumi, Mika; Satoh, Mitsuhiro; Ohnishi, Sumitaka; Suzuki, Toru

2003-01-01

Destructive analysis for material accountancy purpose should maintain higher precision referring the International Target Value (ITV). Quality control for the analysis is effective tool to maintain the analytical precision in routine analysis as well as to improve its performance. Since isotope dilution mass spectrometry for the determination of Plutonium and Uranium content and its isotopic composition has launched in the laboratory of Plutonium Fuel Center (PFC) of JNC, comprehensive quality control system has gradually growing up, which currently consists of bias detecting, random error monitoring and human error preventing system. Preventing analysis bias is the most important to maintain long-term performance of measurement. To make bias detecting capability robust, PFC is participating to several intercomparison programs regarding DA samples. Random error monitoring system is another important system to maintain high performance of each routine analysis operation, which composes functions to detect abnormal dispersion of each result and to confirm the state of health of operation of mass spectrometers by measurement of standard materials. To avoid human error during operation process, introduction of computer control system as much extent as possible is practical approach. In this paper, the comprehensive quality control system is introduced and the experiences gained so far are summarized for discussion. (author)

In-pile test of tritium release from tritium breeding materials (VOM-21H experiment)

International Nuclear Information System (INIS)

Kurasawa, Toshimasa; Takeshita, Hidefumi; Watanabe, Hitoshi; Yoshida, Hiroshi.

1986-10-01

Material development and blanket design of lithium-based ceramics such as lithium oxide, lithium aluminate, lithium silicate and lithium zirconate have been performed in Japan, United State of America and Europian Communities. Lithium oxide is a most attractive candidate for tritium breeding materials because of its high lithium density, high thermal conductivity and good tritium release performance. This work has been done to clarify the characteristics of tritium release and recovery from Li 2 O by means of in-situ tritium release measurement. The effects of temperature and sweep gas composition on the tritium release were investigated in this VOM-21H Experiment. Good measurement of tritium release was achieved but there were uncertainties in reproduciblity of data. The experimental results show that the role of surface adsorption/desorption makes a significant contribution to the tritium release and tritium inventory. Also, it is necessary to define the rate limiting process either diffusion or surface adsorption/desorption. (author)

Characterization of materials for a reactive transport model validation experiment: Interim report on the caisson experiment. Yucca Mountain Site Characterization Project

International Nuclear Information System (INIS)

Siegel, M.D.; Cheng, W.C.; Ward, D.B.; Bryan, C.R.

1995-08-01

Models used in performance assessment and site characterization activities related to nuclear waste disposal rely on simplified representations of solute/rock interactions, hydrologic flow field and the material properties of the rock layers surrounding the repository. A crucial element in the design of these models is the validity of these simplifying assumptions. An intermediate-scale experiment is being carried out at the Experimental Engineered Test Facility at Los Alamos Laboratory by the Los Alamos and Sandia National Laboratories to develop a strategy to validate key geochemical and hydrological assumptions in performance assessment models used by the Yucca Mountain Site Characterization Project

Characterization of materials for a reactive transport model validation experiment: Interim report on the caisson experiment. Yucca Mountain Site Characterization Project

Energy Technology Data Exchange (ETDEWEB)

Siegel, M.D.; Cheng, W.C. [Sandia National Labs., Albuquerque, NM (United States); Ward, D.B.; Bryan, C.R. [Univ. of New Mexico, Albuquerque, NM (United States). Dept. of Earth and Planetary Sciences

1995-08-01

Models used in performance assessment and site characterization activities related to nuclear waste disposal rely on simplified representations of solute/rock interactions, hydrologic flow field and the material properties of the rock layers surrounding the repository. A crucial element in the design of these models is the validity of these simplifying assumptions. An intermediate-scale experiment is being carried out at the Experimental Engineered Test Facility at Los Alamos Laboratory by the Los Alamos and Sandia National Laboratories to develop a strategy to validate key geochemical and hydrological assumptions in performance assessment models used by the Yucca Mountain Site Characterization Project.

The M-Learning Experience of Language Learners in Informal Settings

Science.gov (United States)

Sendurur, Emine; Efendioglu, Esra; Çaliskan, Neslihan Yondemir; Boldbaatar, Nomin; Kandin, Emine; Namazli, Sevinç

2017-01-01

This study is designed to understand the informal language learners' experiences of m-learning applications. The aim is two-folded: (i) to extract the reasons why m-learning applications are preferred and (ii) to explore the user experience of Duolingo m-learning application. We interviewed 18 voluntary Duolingo users. The findings suggest that…

Use of INAA in the preparation of a set soil Reference Materials with certified values of total element contents

International Nuclear Information System (INIS)

Kucera, J.; Horakova, J.; Soukal, L.

1997-01-01

A set of certified Reference Materials was prepared consisting of four natural agricultural soils with normal (n) and elevated (e) levels of element contents: CRM 7001 Light Sandy Soil (n), CRM 7002 Light Sandy Soil (e), CRM 7003 Silty Clay Loam (n), and CRM 7004 Loam (e). In these materials, certified and/or information values of the total contents of the elements As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, V and Zn, and their fractions extractable by aqua regia, boiling and cold 2M nitric acid were derived from an interlaboratory comparison in which 28 laboratories participated. Highly precise and accurate procedures of instrumental neutron activation analysis (INAA) were employed for homogeneity testing and also for certification of the total element contents. For comparation purposes, NIST SRM-2704 Buffalo River Sediment was analyzed by INAA, as well. The INAA results obtained compared very well with the certified and/or information values for four soil CRMs and also with NIST values for SRM-2704. From this agreement, a very high reliability of the new soil CRMs can be inferred. (author)

Environmental assessment for consolidation of certain materials and machines for nuclear criticality experiments and training

International Nuclear Information System (INIS)

1996-01-01

In support of its assigned missions and because of the importance of avoiding nuclear criticality accidents, DOE has adopted a policy to reduce identifiable nuclear criticality safety risks and to protect the public, workers, government property and essential operations from the effects of a criticality accident. In support of this policy, the Los Alamos Critical Experiments Facility (LACEF) at the Los Alamos National Laboratory (LANL) Technical Area (TA) 18, provides a program of general purpose critical experiments. This program, the only remaining one of its kind in the United States, seeks to maintain a sound basis of information for criticality control in those physical situations that DOE will encounter in handling and storing fissionable material in the future, and ensuring the presence of a community of individuals competent in practicing this control

GLAD: The IPNS (Intense Pulsed Neutron Source) Glass, Liquid, and Amorphous materials Diffractometer

International Nuclear Information System (INIS)

Crawford, R.K.; Price, D.L.; Haumann, J.R.; Kleb, R.; Montague, D.G.; Carpenter, J.M.; Susman, S.; Dejus, R.J.

1989-01-01

A number of years of experience in diffraction from amorphous materials has now been accumulated at various pulsed neutron sources. Workshops t IPNS and elsewhere have distilled some of this experience to provide a set of criteria for a new diffractometer dedicated to an optimized for structural studies of amorphous materials. This paper discusses the instrument GLAD (Glass, Liquid, and Amorphous Materials Diffractometer) which has been designed to meet these criteria and is now being built at IPNS. This instrument involves the use of relatively short-wavelength neutrons and a sophisticated neutron detection and acquisition system. A preliminary, simplified version of the instrument has been constructed while the final version is still under design, in order to develop the data acquisition and analysis techniques and to develop methods for collection of data with adequate quality (low background) at short wavelengths. This paper will briefly outline the final instrument envisioned and its calculated performance, but will focus mostly on the details of the detection/acquisition system and the calibration and data collection procedures which have been developed. The brief operating experience which has been gained to data with the preliminary instrument version will also be summarized. 6 refs., 12 figs

A routine chromium determination in biological materials; application to various reference materials and standard reference materials

International Nuclear Information System (INIS)

Tjioe, P.S.; Goeij, J.J.M. de; Volkers, K.J.

1979-01-01

The determination limit under standard working conditions of chromium in biological materials is discussed. Neutron activation analysis and atomic spectrometry have been described for some analytical experiences with NBS SRM 1577 reference material. The chromium determination is a part of a larger multi-element scheme for the determination of 12 elements in biological materials

ANDRA - Referential Materials. Volume 1: Context and scope; Volume 2: Argillaceous materials; Volume 3: Cementitious materials; Volume 4: The corrosion of metallic materials

International Nuclear Information System (INIS)

2001-01-01

This huge document gathers four volumes. The first volume presents some generalities about materials used in the storage of radioactive materials (definition, design principle, current choices and corresponding storage components, general properties of materials and functions of the corresponding storage components, physical and chemical solicitations experienced by materials in a storage), and the structure and content of the other documents. The second volume addresses argillaceous materials. It presents some generalities about these materials in the context of a deep geological storage, and about their design. It presents and comments the crystalline and chemical, and physical and chemical characteristics of swelling argillaceous materials and minerals, describes how these swelling argillaceous materials are shaped and set up, presents and comments physical properties (hydraulic, mechanical and thermal properties) of these materials, comments and discusses the modelling of the geo-chemical behaviour, and their behaviour in terms of containment and transport of radionuclides. The third volume addresses cementitious materials. It presents some generalities about these materials in the context of a deep geological storage, and about their definition and specifications. It presents some more detailed generalities (cement definition and composition, hydration, microstructure of hydrated cements, adjuvants), presents and comments their physical properties (fresh concrete structure and influence of composition, main aimed properties in the hardened status, transfer, mechanical, and thermal properties, shaping and setting up of these materials, technical solutions for hydraulic works). The fourth volume addresses the corrosion of metallic materials. It presents some generalities about these materials in the context of a deep geological storage of radioactive materials. It presents metallic materials and discusses their corrosion behaviour. It describes the peculiarities

Diffusion Experiments in Opalinus Clay: Laboratory, Large-Scale Diffusion Experiments and Microscale Analysis by RBS.

Energy Technology Data Exchange (ETDEWEB)

Garcia-Gutierrez, M.; Alonso de los Rios, U.; Missana, T.; Cormenzana, J.L.; Mingarro, M.; Morejon, J.; Gil, P.

2008-08-06

The Opalinus Clay (OPA) formation in the Zurcher Weiland (Switzerland) is a potential host rock for a repository for high-level radioactive waste. Samples collected in the Mont Terri Underground Rock Laboratory (URL), where the OPA formation is located at a depth between -200 and -300 m below the surface, were used to study the radionuclide diffusion in clay materials. Classical laboratory essays and a novel experimental set-up for large-scale diffusion experiments were performed together to a novel application of the nuclear ion beam technique Rutherford Backscattering Spectrometry (RBS), to understand the transport properties of the OPA and to enhance the methodologies used for in situ diffusion experiments. Through-Diffusion and In-Diffusion conventional laboratory diffusion experiments were carried out with HTO, 36{sup C}l-, I-, 22{sup N}a, 75{sup S}e, 85{sup S}r, 233{sup U}, 137{sup C}s, 60{sup C}o and 152{sup E}u. Large-scale diffusion experiments were performed with HTO, 36{sup C}l, and 85{sup S}r, and new experiments with 60{sup C}o, 137{sup C}s and 152{sup E}u are ongoing. Diffusion experiments with RBS technique were done with Sr, Re, U and Eu. (Author) 38 refs.

Project LITE - Light Inquiry Through Experiments

Science.gov (United States)

Brecher, K.

2004-12-01

Hands-on, inquiry-based, constructivist activity offers students a powerful way to explore, uncover and ultimately gain a feel for the nature of science. In order to make practicable a more genuine approach to learning astronomy, we have undertaken the development of hands-on (and eyes-on) materials that can be used in introductory undergraduate astronomy courses. These materials focus on light and optics. Over the past several years as part of Project LITE (Light Inquiry Through Experiments), we have developed a kit of optical materials that is integrated with a set of Java applets. The combined kit and software allows students to do actual experiments concerning geometrical optics, fluorescence, phosphorescence, polarization and other topics by making use of the photons that are emitted by their computer screens. We have also developed a suite of over 100 Flash applets that allow students to directly explore many aspects of visual perception. A major effort of the project concerns spectroscopy, since it is arguably the most important tool used by astronomers to disentangle the nature of the universe. It is also one of the most challenging subjects to teach in undergraduate astronomy courses. The spectroscopy component of Project LITE includes take-home laboratory materials and experiments that are integrated with web-based software. We have also developed a novel quantitative handheld binocular spectrometer (patent pending). Our major spectroscopic software is called the Spectrum Explorer (SPEX). It allows students to create, manipulate and explore all types of spectra including blackbody, power law, emission and absorption. We are now extending the SPEX capabilities to help students gain easy access to the astronomical spectra included in the NVO databases. All of the Project LITE software can be found http://lite.bu.edu. Project LITE is supported by Grant #DUE-0125992 from the NSF Division of Undergraduate Education.

Supervisors' experiences of workplace supervision of nursing and paramedic students in rural settings: a scoping review.

Science.gov (United States)

Trede, Franziska; McEwen, Celina; Kenny, Amanda; O'Meara, Peter

2014-05-01

We present our findings from a scoping review that sought to identify what is known about nursing and paramedic clinical supervisors' experiences of their supervision practices in rural settings. Our interest in these two groups is based on the central role that nurses and paramedics play in rural health care. Scoping reviews support identification of a broad range of literature, including all types of study designs. We adopted Arksey and O'Malley's five-stage approach: identifying the research question; identifying relevant studies; study selection; charting the data; and collating, summarising and reporting results. Databases searched included Academic Search Complete, Springer, Factiva, ProQuest, Ebsco, Informit, VOCEDplus and Scopus. Based on our research question and inclusion and exclusion criteria we selected relevant literature and summarised and reported it using Arksey and O'Malley's framework. The review yielded five articles from four countries: Sweden, Belgium, Malaysia and Australia. From this scoping review, we identified key themes related to supervisors' experiences, including clarification of expectations, support from managers and colleagues, the need for shared understanding between university, students and supervisors and required skills and competence in supervising students. © 2013.

Material Systems

DEFF Research Database (Denmark)

Jensen, Mads Brath; Mortensen, Henrik Rubæk; Mullins, Michael

2009-01-01

This paper describes and reflects upon the results of an investigative project which explores the setting up of a material system - a parametric and generative assembly consisting of and taking into consideration material properties, manufacturing constraints and geometric behavior. The project...... approaches the subject through the construction of a logic-driven system aiming to explore the possibilities of a material system that fulfills spatial, structural and performative requirements concurrently and how these are negotiated in situations where they might be conflicting....

Experiences with workplace bullying among athletic trainers in the collegiate setting.

Science.gov (United States)

Weuve, Celest; Pitney, William A; Martin, Malissa; Mazerolle, Stephanie M

2014-01-01

Workplace bullying (WPB) is a series of persistent negative interactions that affect a clinician's ability to perform his or her role. Although WPB has been studied in other health professions, to date, no information exists pertaining to WPB in athletic training. To determine the prevalence of WPB in the collegiate setting and examine factors that influence its occurrence. Cross-sectional study. Collegiate setting. There were 723 (329 female, 394 male) athletic trainers (ATs) aged 37.5 ± 10.4 years. We collected data via the validated and reliable online Athletic Training Environment Survey. Descriptive statistics were obtained to determine a bullying score for each AT and examine the prevalence of WPB. Chi-square analyses were performed to examine the differences between (1) sex, (2) academic degree level, (3) employment title, and (4) National Athletic Trainers' Association district. A total of 106 participants (14.7%) had a score of 2 or higher, indicating they were bullied in the athletic training setting. Of those bullied, 47 (44.3%) were women and 59 (55.7%) were men. There was no difference between women and men with respect to having experienced bullying (χ(2)1 = 0.068, P = .794). Moreover, no difference existed in the prevalence of bullying among ATs holding various degrees (χ(2)3 = 6.73, P = .081) or among ATs holding various titles within an organization (χ(2)5 = 3.55, P = .616). More (χ(2)1 = 23.77, P = Bullying was experienced by both male and female ATs in the collegiate setting, and a higher number of bullies were male. More research is necessary to explore WPB in other work settings.

Two-stage multipolar ordering in Pr T2Al20 Kondo materials