WorldWideScience

Sample records for materials science 1990 1991

  1. Chemistry and Materials Science, 1990--1991. [Second annual report

    Energy Technology Data Exchange (ETDEWEB)

    Sugihara, T.T.; Bruner, J.M.; McElroy, L.A. [eds.

    1991-12-31

    This 2-year (FY 1990-91) contains 49 technical articles in ten sections: research sampler, metals and alloys, energetic materials, chemistry and physics of advanced materials, bonding and reactions at surfaces and interfaces, superconductivity, energy R and D, waste processing and management, characterization and analysis, and facilities and instrumentation. Two more sections list department personnel, their publications etc., consultants, and summary of department budgets. The articles are processed separately for the data base. (DLC)

  2. Center for Materials Science, Los Alamos National Laboratory. Status report, October 1, 1990--September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Parkin, D.M.; Boring, A.M. [comps.

    1991-10-01

    This report summarizes the progress of the Center for Materials Science (CMS) from October 1, 1990 to September 30, 1991, and is the nineth such annual report. It has been a year of remarkable progress in building the programs of the Center. The extent of this progress is described in detail. The CMS was established to enhance the contribution of materials science and technology to the Laboratory`s defense, energy and scientific missions, and the Laboratory. In carrying out these responsibilities it has accepted four demanding missions: (1) Build a core group of highly rated, established materials scientists and solid state physicists. (2) Promote and support top quality, interdisciplinary materials research programs at Los Alamos. (3) Strengthen the interactions of materials science and Los Alamos with the external materials science community. and (4) Establish and maintain modern materials research facilities in a readily accessible, central location.

  3. Materials Sciences Division 1990 annual report

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-31

    This report is the Materials Sciences Division`s annual report. It contains abstracts describing materials research at the National Center for Electron Microscopy, and for research groups in metallurgy, solid-state physics, materials chemistry, electrochemical energy storage, electronic materials, surface science and catalysis, ceramic science, high tc superconductivity, polymers, composites, and high performance metals.

  4. Materials Sciences Division 1990 annual report

    Energy Technology Data Exchange (ETDEWEB)

    1990-01-01

    This report is the Materials Sciences Division's annual report. It contains abstracts describing materials research at the National Center for Electron Microscopy, and for research groups in metallurgy, solid-state physics, materials chemistry, electrochemical energy storage, electronic materials, surface science and catalysis, ceramic science, high tc superconductivity, polymers, composites, and high performance metals.

  5. Knotts Environmental Science Magnet Elementary School: 1988-1989, 1989-1990, 1990-1991. Summative Evaluation.

    Science.gov (United States)

    Seever, Margaret

    This report presents a summative evaluation of the first 3 years of the program of Knotts Environmental Science School in the Kansas City School District, Missouri. The school, which serves students in kindergarten through grade 5, began operation in 1988. The report focuses on the enrollment goals; the implementation of the program; the 1990-91…

  6. High Temperature Materials Laboratory fourth annual report, October 1990--September 1991

    Energy Technology Data Exchange (ETDEWEB)

    Tennery, V.J.; Foust, F.M.

    1991-12-01

    The High Temperature Materials Laboratory has completed its fourth year of operation as a designated Department of Energy User Facility at the Oak Ridge National Laboratory. Growth of the user program is evidenced by the number of outside institutions who have executed user agreements since the facility began operation in 1987. A total of 118 nonproprietary agreements (62 university and 56 industry) and 28 proprietary agreements (2 university, 26 industry) are now in effect. Five other government facilities have also participated in the user program. Sixty-free nonproprietary research proposals (38 from university, 26 from industry, and 1 other government facility) and four proprietary proposals were considered during this reporting period. Research projects active in FY 1991 are summarized.

  7. Polycrystalline thin film materials and devices. Annual subcontract report, 16 January 1990--15 January 1991

    Energy Technology Data Exchange (ETDEWEB)

    Baron, B.N.; Birkmire, R.W.; Phillips, J.E.; Shafarman, W.N.; Hegedus, S.S.; McCandless, B.E. [Delaware Univ., Newark, DE (United States). Inst. of Energy Conversion

    1991-11-01

    Results and conclusion of Phase I of a multi-year research program on polycrystalline thin film solar cells are presented. The research comprised investigation of the relationships among processing, materials properties and device performance of both CuInSe{sub 2} and CdTe solar cells. The kinetics of the formation of CuInSe{sub 2} by selenization with hydrogen selenide was investigated and a CuInSe{sub 2}/CdS solar cell was fabricated. An alternative process involving the reaction of deposited copper-indium-selenium layers was used to obtain single phase CuInSe{sub 2} films and a cell efficiency of 7%. Detailed investigations of the open circuit voltage of CuInSe{sub 2} solar cells showed that a simple Shockley-Read-Hall recombination mechanism can not account for the limitations in open circuit voltage. Examination of the influence of CuInSe{sub 2} thickness on cell performance indicated that the back contact behavior has a significant effect when the CuInSe{sub 2} is less than 1 micron thick. CdTe/CdS solar cells with efficiencies approaching 10% can be repeatedly fabricated using physical vapor deposition and serial post deposition processing. The absence of moisture during post deposition was found to be critical. Improvements in short circuit current of CdTe solar cells to levels approaching 25 mA/cm{sup 2} are achievable by making the CdS window layer thinner. Further reductions in the CdS window layer thickness are presently limited by interdiffusion between the CdS and the CdTe. CdTe/CdS cells stored without protection from the atmosphere were found to degrade. The degradation was attributed to the metal contact. CdTe cells with ZnTe:Cu contacts to the CdTe were found to be more stable than cells with metal contacts. Analysis of current-voltage and spectral response of CdTe/CdS cells indicates the cell operates as a p-n heterojunction with the diode current dominated by SRH recombination in the junction region of the CdTe.

  8. National Educators' Workshop: Update 1991. Standard Experiments in Engineering Materials Science and Technology

    Science.gov (United States)

    Gardner, James E. (Compiler); Jacobs, James A. (Compiler); Stiegler, James O. (Compiler)

    1992-01-01

    Given here is a collection of experiments presented and demonstrated at the National Educators' Workshop: Update 91, held at the Oak Ridge National Laboratory on November 12-14, 1991. The experiments related to the nature and properties of engineering materials and provided information to assist in teaching about materials in the education community.

  9. Nuclear Technology Programs semiannual progress report, October 1990--March 1991

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-12-01

    This document reports on the work done by the Nuclear Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period October 1990--March 1991. These programs involve R&D in three areas: applied physical chemistry, separation science and technology, and nuclear waste management. The work in applied physical chemistry includes investigations into the processes that control the release and transpose of fission products under accident-like conditions in a light water reactor, the thermophysical properties of the metal fuel in the Integral Fast Reactor, and the properties of selected materials in environments simulating those of fusion energy systems. In the area of separation science and technology, the bulk of the effort is concerned with developing and implementing processes for the removal and concentration of actinides from waste streams contaminated by transuranic elements. In the area of waste management, investigations are underway on the performance of materials in projected nuclear repository conditions to provide input to the licensing of the nation`s high-level waste repositories.

  10. Photovoltaic Subcontract Program, FY 1991. Annual report, [October 1, 1990--September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    This report summarizes the fiscal year (FY) 1991 (October 1, 1990, through September 30, 1991) progress of the subcontracted photovoltaic (PV) research and development (R&D) performed under the Photovoltaic Advanced Research and Development Project at the National Renewable Energy Laboratory (NREL) -- formerly the Solar Energy Research Institute (SERI). The mission of the national PV program is to develop PV technology for large-scale generation of economically competitive electric power in the United States. The technical sections of the report cover the main areas of the subcontract program: the Amorphous Silicon Research Project, Polycrystalline Thin Films, Crystalline Silicon Materials Research, High-Efficiency Concepts, the New Ideas Program, the University Participation Program, and the Photovoltaic Manufacturing Technology (PVMaT) project. Technical summaries of each of the subcontracted programs provide a discussion of approaches, major accomplishments in FY 1991, and future research directions.

  11. Fossil Energy Program semiannual progress report, October 1990--March 1991

    Energy Technology Data Exchange (ETDEWEB)

    Judkins, R.R.

    1992-07-01

    This report covers progress made during the period October 1, 1990, through March 31, 1991, for research and development projects that contribute to the advancement of various fossil energy technologies. Projects on the Fossil Energy Program are supported by the DOE Office of Fossil Energy, the DOE Morgantown Energy Technology Center, the DOE Pittsburgh Energy Technology Center, the DOE Fossil Energy Clean Coal Technology Program, the DOE Office of Basic Energy Sciences, the DOE Fossil Energy Office of Petroleum Reserves, the DOE Fossil Energy Naval Petroleum and Oil Shale Reserves, and the US Agency for International Development. The Fossil, Energy Program organization chart is shown in the appendix. Topics include: alloys, ceramics and composite research and development; corrosion and erosion research; environmental analysis and information systems; coal conversion development; mild gasification product characterization; coal combustion research; strategic petroleum reserve planning and modeling; and coal structure and chemistry.

  12. The 1990-1991 NASA space biology accomplishments

    Science.gov (United States)

    Halstead, Thora W. (Editor)

    1993-01-01

    This report consists of individual technical summaries of research projects of NASA's Space Biology Program, for research conducted during the period May 1990 through May 1991. This program includes both plant and animal research, and is dedicated to understanding the role of gravity and other environmental factors on biological systems and to using the microgravity of the space environment as a tool to advance fundamental scientific knowledge in the biological sciences to improve the quality of life on Earth and contribute to NASA's goal of manned exploration of space. The summaries for each project include a description of the research, a list of the accomplishments, an explanation of the significance of the accomplishments, and a list of publications.

  13. Annual report, Basic Sciences Branch, FY 1991

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    This report summarizes the progress of the Basic Sciences Branch of the National Renewable Energy Laboratory (NREL) from October 1, 1990, through September 30, 1991. Seven technical sections of the report cover these main areas of NREL`s in-house research: Semiconductor Crystal Growth, Amorphous Silicon Research, Polycrystalline Thin Films, III-V High-Efficiency Photovoltaic Cells, Solid-State Theory, Solid-State Spectroscopy, and Superconductivity. Each section explains the purpose and major accomplishments of the work in the context of the US Department of Energy`s National Photovoltaic Research Program plans.

  14. Annual report, Basic Sciences Branch, FY 1991

    Energy Technology Data Exchange (ETDEWEB)

    1993-04-01

    This report summarizes the progress of the Basic Sciences Branch of the National Renewable Energy Laboratory (NREL) from October 1, 1990, through September 30, 1991. Seven technical sections of the report cover these main areas of NREL's in-house research: Semiconductor Crystal Growth, Amorphous Silicon Research, Polycrystalline Thin Films, III-V High-Efficiency Photovoltaic Cells, Solid-State Theory, Solid-State Spectroscopy, and Superconductivity. Each section explains the purpose and major accomplishments of the work in the context of the US Department of Energy's National Photovoltaic Research Program plans.

  15. AMSAHTS 1990: Advances in Materials Science and Applications of High Temperature Superconductors

    Science.gov (United States)

    Bennett, Larry H. (Editor); Flom, Yury (Editor); Moorjani, Kishin (Editor)

    1991-01-01

    This publication is comprised of abstracts for oral and poster presentations scheduled for AMSAHTS '90. The conference focused on understanding high temperature superconductivity with special emphasis on materials issues and applications. AMSAHTS 90, highlighted the state of the art in fundamental understanding of the nature of high-Tc superconductivity (HTSC) as well as the chemistry, structure, properties, processing and stability of HTSC oxides. As a special feature of the conference, space applications of HTSC were discussed by NASA and Navy specialists.

  16. Molecular Science Research Center, 1991 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Knotek, M.L.

    1992-03-01

    During 1991, the Molecular Science Research Center (MSRC) experienced solid growth and accomplishment and the Environmental, and Molecular Sciences Laboratory (EMSL) construction project moved forward. We began with strong programs in chemical structure and dynamics and theory, modeling, and simulation, and both these programs continued to thrive. We also made significant advances in the development of programs in materials and interfaces and macromolecular structure and dynamics, largely as a result of the key staff recruited to lead these efforts. If there was one pervasive activity for the past year, however, it was to strengthen the role of the EMSL in the overall environmental restoration and waste management (ER/WM) mission at Hanford. These extended activities involved not only MSRC and EMSL staff but all PNL scientific and technical staff engaged in ER/WM programs.

  17. CoalCorp annual report 1990/1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    A report of performance of the CoalCorp during 1990/91 is given by the Chairman and the Directors and Chief Executive's review discusses the New Zealand market for coal, the export market, the company's involvement with the community, privatization, industrial relations and the environmental issues facing the company. Financial statements for the year ended 31 March 1991 are included. After tax profit of 8.9M dollars was less than in 1989/90. The company was affected by the recession, the deferral of energy use decisions and the government's decision to dedicate Maui gas to electricity generation. The sale of CoalCorp awaits resolution of legal issues arising from a claim by the Tianui Maori Trust Board.

  18. Joint Services Electronics Program for the Period 1 April 1990 Through 31 March 1991, (Coordinated Science Laboratory, University Illinois at Urbana-Champaign)

    Science.gov (United States)

    1991-06-30

    Urbana-Champaign Coordinated Science Laboratory I 102 REFERENCES:" [14] D. A. B. Miller, D. S. Chemla, T. C. Damen, A. C, Gossard, W. Wiegman , T. H...Jul. 1985. [15] D. A. B. Miller, D. S. Chemla, T. C. Damen, A. C. Gossard, W. Wiegman , T. H. Wood, and C. A, Burrus, "Novel hybrid optically...Damen, T. H. Wood, C. A. Burrus, A. C. Gossard, and W. Wiegman , ’The quantum well self-electrooptic effect device: optoelectronic bistability and

  19. Biological Sciences Division 1991 Programs

    Science.gov (United States)

    1991-08-01

    from S. microadriaticum. PUBLICATIONS AND REPORTS: Govind, N.S., Roman, S.J., Iglesias- Prieto , R., Trench, R.K., Triplett, E.L., and Prezelin, B.B...growth in vitro under varied oxygen tensions. Symbiosis 11 (in press). Markell, D.A., Trench, R.K. and Iglesias- Prieto , R. 1991, Macromolecules...Oppenheim, M. Kluger, and C.A. Dinarello), Molecular and Cellular Biology of Cytokines, New York, Alan R. Lies, pp. 407-412. Kovacs, E.J. (1991) Control

  20. Brookhaven highlights for fiscal year 1991, October 1, 1990--September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Rowe, M.S.; Cohen, A.; Greenberg, D.; Seubert, L.; Kuper, J.B.H.

    1991-01-01

    This report highlights Brookhaven National Laboratory's activities for fiscal year 1991. Topics from the four research divisions: Computing and Communications, Instrumentation, Reactors, and Safety and Environmental Protection are presented. The research programs at Brookhaven are diverse, as is reflected by the nine different scientific departments: Accelerator Development, Alternating Gradient Synchrotron, Applied Science, Biology, Chemistry, Medical, National Synchrotron Light Source, Nuclear Energy, and Physics. Administrative and managerial information about Brookhaven are also disclosed. (GHH)

  1. Brookhaven highlights for fiscal year 1991, October 1, 1990--September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Rowe, M.S.; Cohen, A.; Greenberg, D.; Seubert, L.; Kuper, J.B.H.

    1991-12-31

    This report highlights Brookhaven National Laboratory`s activities for fiscal year 1991. Topics from the four research divisions: Computing and Communications, Instrumentation, Reactors, and Safety and Environmental Protection are presented. The research programs at Brookhaven are diverse, as is reflected by the nine different scientific departments: Accelerator Development, Alternating Gradient Synchrotron, Applied Science, Biology, Chemistry, Medical, National Synchrotron Light Source, Nuclear Energy, and Physics. Administrative and managerial information about Brookhaven are also disclosed. (GHH)

  2. Cooperative research in coal liquefaction. Final report, May 1, 1990-- April 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Huffman, G.P. [ed.

    1992-02-15

    The Consortium for Fossil Fuel Liquefaction Science (CFFLS) is currently engaged in a three year contract with the US Department of Energy investigating a range of research topics dealing with direct coal liquefaction. This report summarizes the results of this program in its second year, from May 1, 1990 to April 30, 1991. Accomplishments for this period are presented for the following tasks: Iron-based catalysts for coal liquefaction, exploratory research on coal conversion, novel coal liquefaction concepts, and novel catalysts for coal liquefaction.

  3. Cognitive and Neural Sciences Division, 1991 Programs.

    Science.gov (United States)

    Vaughan, Willard S., Ed.

    This report documents research and development performed under the sponsorship of the Cognitive and Neural Sciences Division of the Office of Naval Research in fiscal year 1991. It provides abstracts (title, principal investigator, project code, objective, approach, progress, and related reports) of projects of three program divisions (cognitive…

  4. Contaminants in Interior Least Tern Eggs from Quivira National Wildlife Refuge, Kansas, in 1990 and 1991

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Flooded or abandoned eggs of interior least terns (Sterna antillarum) nesting at Quivira National Wildlife Refuge in central Kansas were collected in 1990 and 1991....

  5. Tewaukon National Wildlife Refuge Complex: 1991 Annual Water Management Plan and 1990 Use Report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is the water use report/management plan for Tewaukon National Wildlife Refuge Complex for 1991-1990. The plan includes discussion on water rights,...

  6. 1990 Annual water management report 1991 Annual water management plan : Ruby Lake National Wildlife Refuge : Ruby Valley Nevada

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Ruby Lake NWR 1990 Annual Water Management Report 1991 Annual Water Management Plan. Includes 1990 weather summary, water availability forecast, summary of 1990...

  7. Water Science and Technology Board annual report, 1990

    Energy Technology Data Exchange (ETDEWEB)

    1990-01-01

    This report summarizes the activities of the Water Science and Technology Board (WSTB) during 1990, its eighth year of existence. It describes current and recently completed projects, new activities scheduled to begin in 1991, and plans for the future. The WSTB is intended to be a dynamic forum, a mechanism by which the board community of water science, technology, and policy professionals can help assure high-quality national water programs. As such, the Board considers out-reach and communications of much importance.

  8. Water Science and Technology Board annual report, 1990

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-31

    This report summarizes the activities of the Water Science and Technology Board (WSTB) during 1990, its eighth year of existence. It describes current and recently completed projects, new activities scheduled to begin in 1991, and plans for the future. The WSTB is intended to be a dynamic forum, a mechanism by which the board community of water science, technology, and policy professionals can help assure high-quality national water programs. As such, the Board considers out-reach and communications of much importance.

  9. Rijden onder invloed in de provincie Noord-Brabant 1990/1991 : evaluatie van de alcoholcampagne 1990-1991 van het Regionaal Orgaan voor de Verkeersveiligheid ROV.

    NARCIS (Netherlands)

    Mathijssen, M.P.M.

    1992-01-01

    For the second time in succession, the Regional Organization for Traffic Safety conducted an alcohol campaign in the Dutch province of North Brabant, at the end of 1990 and the beginning of 1991. The campaign, which lasted for two and a half months, consisted of an intensive police surveillance

  10. The State Prize for 1991 Science and Technology Advance

    Institute of Scientific and Technical Information of China (English)

    LINantion; FENGYilun

    1992-01-01

    According to the report in Science and Technology Daily on 10 July 1991, prize winners for the State Prize for 1991 Science and Technology Advance in China have been selected by the Evaluation Committee of the State Prize for 1991 Science and Technology Advance. Among the prizes, eight programs were concerned with rice research: Pathogenetic Types of Rice Bacterial Leaf Blight in China and the Application in Disease-resistant Breeding, by FANG Zhongda,

  11. Research in Progress 1 July 1990 - 30 June 1991

    Science.gov (United States)

    1991-06-30

    Review of Progress in Quantitative Toughening of Ceria- Tetragonal - Zirconia -Alumina (Ce- TZP / Nondestructive Evaluation. Vol 9. 1990. p1 123. AD A228 AI...crystal Y205 stabilized cubic zirconia after change occurs. These observations are consistent implantation with 240 KeV Xe. These measurements with the...Ceria-Partially-Stabilized Zirconia University of Michigan iCe- TZP )-Alumina Composites, by Jing-Fong Tsai et al.. J SC: BWL. MTL Am Ceram Soc 73.2992

  12. Arlington/Alexandria 1990-1991 REEP Workplace Literacy Training Project. Final Evaluation Report.

    Science.gov (United States)

    Peterson, Morris

    As part of the National Workplace Literacy Program, the 1990-1991 Arlington Education and Employment Program (REEP) served 333 functionally illiterate limited English proficient (LEP) adults working in Virginia hotels at entry level jobs in housekeeping, food and beverage service, and maintenance. Training in workplace literacy and…

  13. Analysis of Annual Report Data for School Years 1990, 1991, and 1992.

    Science.gov (United States)

    Lewis, Morgan V.

    Annual report data for the 1990, 1991, and 1992 school years of schools and colleges accredited by the Accrediting Commission of Career Schools/Colleges of Technology were analyzed to determine whether such schools and colleges have any characteristics that are significantly related to their performance. The following six measures were derived:…

  14. MHD Integrated Topping Cycle Project. Fourteenth quarterly technical progress report, November 1, 1990-- January 31, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-02-01

    This fourteenth quarterly technical progress report of the MHD Integrated Topping Cycle Project presents the accomplishments during the period November 1, 1990 to January 31, 1991. Testing of the High Pressure Cooling Subsystem electrical isolator was completed. The PEEK material successfully passed the high temperature, high pressure duration tests (50 hours). The Combustion Subsystem drawings were CADAM released. The procurement process is in progress. An equipment specification and RFP were prepared for the new Low Pressure Cooling System (LPCS) and released for quotation. Work has been conducted on confirmation tests leading to final gas-side designs and studies to assist in channel fabrication.The final cathode gas-side design and the proposed gas-side designs of the anode and sidewall are presented. Anode confirmation tests and related analyses of anode wear mechanisms used in the selection of the proposed anode design are presented. Sidewall confirmation tests, which were used to select the proposed gas-side design, were conducted. The design for the full scale CDIF system was completed. A test program was initiated to investigate the practicality of using Avco current controls for current consolidation in the power takeoff (PTO) regions and to determine the cause of past current consolidation failures. Another important activity was the installation of 1A4-style coupons in the 1A1 channel. A description of the coupons and their location with 1A1 channel is presented herein.

  15. Fusion Energy Division progress report, 1 January 1990--31 December 1991

    Energy Technology Data Exchange (ETDEWEB)

    Sheffield, J.; Baker, C.C.; Saltmarsh, M.J.

    1994-03-01

    The Fusion Program of the Oak Ridge National Laboratory (ORNL), a major part of the national fusion program, encompasses nearly all areas of magnetic fusion research. The program is directed toward the development of fusion as an economical and environmentally attractive energy source for the future. The program involves staff from ORNL, Martin Marietta Energy systems, Inc., private industry, the academic community, and other fusion laboratories, in the US and abroad. Achievements resulting from this collaboration are documented in this report, which is issued as the progress report of the ORNL Fusion Energy Division; it also contains information from components for the Fusion Program that are external to the division (about 15% of the program effort). The areas addressed by the Fusion Program include the following: experimental and theoretical research on magnetic confinement concepts; engineering and physics of existing and planned devices, including remote handling; development and testing of diagnostic tools and techniques in support of experiments; assembly and distribution to the fusion community of databases on atomic physics and radiation effects; development and testing of technologies for heating and fueling fusion plasmas; development and testing of superconducting magnets for containing fusion plasmas; development and testing of materials for fusion devices; and exploration of opportunities to apply the unique skills, technology, and techniques developed in the course of this work to other areas (about 15% of the Division`s activities). Highlights from program activities during 1990 and 1991 are presented.

  16. Reconstruction and analysis of the Chukchi Sea circulation in 1990-1991

    Science.gov (United States)

    Panteleev, G.; Nechaev, D. A.; Proshutinsky, A.; Woodgate, R.; Zhang, J.

    2010-08-01

    The Chukchi Sea (CS) circulation reconstructed for September 1990 to October 1991 from sea ice and ocean data is presented and analyzed. The core of the observational data used in this study comprises the records from 12 moorings deployed in 1990 and 1991 in U.S. and Russian waters and two hydrographic surveys conducted in the region in the fall of 1990 and 1991. The observations are processed by a two-step data assimilation procedure involving the Pan-Arctic Ice-Ocean Modeling and Assimilation System (employing a nudging algorithm for sea ice data assimilation) and the Semi-implicit Ocean Model [utilizing a conventional four-dimensional variational (4D-var) assimilation technique]. The reconstructed CS circulation is studied to identify pathways and assess residence times of Pacific water in the region; quantify the balances of volume, freshwater, and heat content; and determine the leading dynamical factors configuring the CS circulation. It is found that in 1990-1991 (high AO index and a cyclonic circulation regime) Pacific water transiting the CS toward the Canada basin followed two major pathways, namely via Herald Canyon (Herald branch of circulation, 0.23 Sv) and between Herald Shoal and Cape Lisburne (central branch of circulation and Alaskan Coastal Current, 0.32 Sv). The annual mean flow through Long Strait was negligible (0.01 Sv). Typical residence time of Pacific water in the region varied between 150 days for waters entering the CS in September and 270 days for waters entering in February/March. Momentum balance analysis reveals that geostrophic balance between barotropic pressure gradient and Coriolis force dominated for most of the year. Baroclinic effects were important for circulation only in the regions with large horizontal salinity gradients associated with the fresh Alaskan and Siberian coastal currents and the Cape Lisburne and Great Siberian polynyas. In the polynyas, the baroclinic effects were due to strong salinification and convection

  17. National Synchrotron Light Source annual report 1991. Volume 1, October 1, 1990--September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Hulbert, S.L.; Lazarz, N.M. [eds.

    1992-04-01

    This report discusses the following research conducted at NSLS: atomic and molecular science; energy dispersive diffraction; lithography, microscopy and tomography; nuclear physics; UV photoemission and surface science; x-ray absorption spectroscopy; x-ray scattering and crystallography; x-ray topography; workshop on surface structure; workshop on electronic and chemical phenomena at surfaces; workshop on imaging; UV FEL machine reviews; VUV machine operations; VUV beamline operations; VUV storage ring parameters; x-ray machine operations; x-ray beamline operations; x-ray storage ring parameters; superconducting x-ray lithography source; SXLS storage ring parameters; the accelerator test facility; proposed UV-FEL user facility at the NSLS; global orbit feedback systems; and NSLS computer system.

  18. Earth Sciences report, 1989--1990

    Energy Technology Data Exchange (ETDEWEB)

    Younker, L.W.; Peterson, S.J.; Price, M.E. (eds.)

    1991-03-01

    The Earth Sciences Department at Lawrence Livermore National Laboratory (LLNL) conducts work in support of the Laboratory's energy, defense, environmental, and basic research programs. The Department comprises more than 100 professional scientific personnel spanning a variety of subdisciplines: geology, seismology, physics, geophysics, geochemistry, geohydrology, chemical engineering, and mechanical engineering. Resident technical support groups add significant additional technical expertise, including Containment Engineering, Computations, Electronic Engineering, Mechanical Engineering, Chemistry and Materials Science, and Technical Information. In total, approximately 180 professional scientists and engineers are housed in the Earth Sciences Department, making it one of the largest geo-science research groups in the nation. Previous Earth Sciences reports have presented an outline of the technical capabilities and accomplishments of the groups within the Department. In this FY 89/90 Report, we have chosen instead to present twelve of our projects in full-length technical articles. This Overview introduces those articles and highlights other significant research performed during this period.

  19. Site characterization progress report: Yucca Mountain, Nevada, October 1, 1990--March 31, 1991; Number 4

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-10-01

    In accordance with the requirements of Section 113 (b) (3) of the Nuclear Waste Policy Act of 1982, as amended (NWPA), the US Department of Energy (DOE) has prepared this report on the progress of site characterization activities at Yucca Mountain, Nevada, for the period October 1, 1990, through March 31, 1991. This report is the fourth in a series of reports that are issued at intervals of approximately six months during site characterization. The report covers a number of initiatives to improve the effectiveness of the site characterization program, and covers continued efforts related to preparatory activities, Study Plans, and performance assessment.

  20. DOE Hydropower Program biennial report 1990--1991 (with updated annotated bibliography)

    Energy Technology Data Exchange (ETDEWEB)

    Chappell, J.R.; Rinehart, B.N.; Sommers, G.L. (Idaho National Engineering Lab., Idaho Falls, ID (United States)); Sale, M.J. (Oak Ridge National Lab., TN (United States))

    1991-07-01

    This report summarizes the activities of the US Department of Energy's (DOE) Hydropower Program for fiscal years 1990 and 1991, and provides an annotated bibliography of research, engineering, operations, regulations, and costs of projects pertinent to hydropower development. The Hydropower Program is organized as follows: background (including Technology Development and Engineering Research and Development); Resource Assessment; National Energy Strategy; Technology Transfer; Environmental Research; and, the bibliography discusses reports written by both private and non-Federal Government sectors. Most reports are available from the National Technical Information Service. 5 figs., 2 tabs.

  1. Basic Sciences Branch annual report, FY 1990

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-01

    This report summarizes the progress of the Basic Sciences Branch of the National Renewable Energy Laboratory (NREL) from October 1, 1989, through September 30, 1990. Six technical sections of the report cover these main areas of NREL's in-house research: Semiconductor Crystal Growth, Amorphous Silicon Research, Polycrystalline Thin Films, III-V High-Efficiency Photovoltaic Cells, Solid-State Theory, and Solid-State Spectroscopy. Each section of the report was written by the group leader principally in charge of the work. The task in each case was to explain the purpose and major accomplishments of the work in the context of the US Department of Energy's National Photovoltaic Research Program plans.

  2. Basic Sciences Branch annual report, FY 1990

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-01

    This report summarizes the progress of the Basic Sciences Branch of the National Renewable Energy Laboratory (NREL) from October 1, 1989, through September 30, 1990. Six technical sections of the report cover these main areas of NREL`s in-house research: Semiconductor Crystal Growth, Amorphous Silicon Research, Polycrystalline Thin Films, III-V High-Efficiency Photovoltaic Cells, Solid-State Theory, and Solid-State Spectroscopy. Each section of the report was written by the group leader principally in charge of the work. The task in each case was to explain the purpose and major accomplishments of the work in the context of the US Department of Energy`s National Photovoltaic Research Program plans.

  3. A Summary Of The Naval Postgraduate School Research Program And Recent Publications, October 1990 to September 1991

    Science.gov (United States)

    1991-09-30

    States Navy B.S., University of New Mexico , 1984 Master of Science in Computer Science-September 1991 Advisor. Lucia Luqi-Department of Computer Science...John B. Frank, Jr.-Commander, United States Navy B.S., University of New Mexico , 1974 Master of Science in Information Systems-September 1991 Advisor...Mangement Services ( MOCAS ), as the organizational management information system. This thesis research was undertaken to recommend the most efficient method

  4. Cognitive and Neural Sciences Division 1991 Programs

    Science.gov (United States)

    1991-08-01

    Neuroscience. Davis, J. and Eichenbaum , H., (Eds) MIT Press. Leen, T., Means, E. and Hammerstrom, D. (1990) Analysis and VLSI implementation of self-organizing...Davis and H. Eichenbaum (Eds.) MIT Press. 154 TITLE: Intelligent Controls Research Using the Dexterous Robotic Hand and Neural Networks Laboratory...Electronic ’.pproach PRINCIPAL INVESTIGATOR: Kevan A. Martin Medical Research Council Department of Pharmacology (0865) 275184 R&T PROJECT CODE: 4426411

  5. Kootenai River White Sturgeon Investigations and Experimental Culture, 1990-1991 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Apperson, Kimberly A.

    1992-07-01

    Setline and angling techniques were used to sample 56 white sturgeon Acioenser transmontanus from the Kootenai River in 1991. Of those sampled, nine were recaptures from previous years of this study. A total of 382 white sturgeon were captured from March 1989 through October 1991. Fork lengths of white sturgeon in the sample ranged from 88-274 cm. Our data indicated there was a complete lack of recruitment of juveniles into the population. The youngest fish sampled was of the 1977 year class. The population was estimated at 880 individuals with a 95% confidence interval of 638 to 1,211. Annual mortality of white sturgeon since 1982 is 3.74%. Approximately 80% of the population was more than 20 years old and was reproductively mature. Surgical examination of 309 white sturgeon since 1989 indicated that approximately 7% of the female white sturgeon and 30% of the male white sturgeon are reproductive each year. The ratio of males to females was estimated at 1:l. White sturgeon sampled and released with and without surgical examination were recaptured at equal rates. An ongoing sonic telemetry study has documented long distance movements by adults. White sturgeon regularly move across the British Columbia - Idaho border. White sturgeon seek out deep holes in the river or migrate to Kootenay Lake during late fall, During spring and early summer of both 1990 and 1991 reproductively mature white sturgeon moved from 15 to 110 km upriver and congregated within 10 km downriver from Bonners Ferry in areas of elevated water velocity. This behavior coincided with increasing discharge and water temperatures. Developing white sturgeon eggs were recovered from the river near Bonners Ferry on July 3, 1991. Contamination of eggs by organochloride compounds were less in recent samples from the Kootenai River than in a single sample collected in 1982. White sturgeon eggs from the Kootenai River fish contained approximately one tenth the organochloride compounds of white sturgeon eggs

  6. Space life sciences strategic plan, 1991

    Science.gov (United States)

    1992-01-01

    Over the last three decades the life sciences program has significantly contributed to NASA's manned and unmanned exploration of space, while acquiring new knowledge in the fields of space biology and medicine. The national and international events which have led to the development and revision of NASA strategy will significantly affect the future of life sciences programs both in scope and pace. This document serves as the basis for synthesizing the option to be pursued during the next decade, based on the decisions, evolution, and guiding principles of the National Space Policy.

  7. FY 1990 Applied Sciences Branch annual report

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.M.; Dippo, P.C. (eds.)

    1991-11-01

    The Applied Sciences Branch actively supports the advancement of DOE/SERI goals for the development and implementation of the solar photovoltaic technology. The primary focus of the laboratories is to provide state-of-the-art analytical capabilities for materials and device characterization and fabrication. The branch houses a comprehensive facility which is capable of providing information on the full range of photovoltaic components. A major objective of the branch is to aggressively pursue collaborative research with other government laboratories, universities, and industrial firms for the advancement of photovoltaic technologies. Members of the branch disseminate research findings to the technical community in publications and presentations. This report contains information on surface and interface analysis, materials characterization, development, electro-optical characterization module testing and performance, surface interactions and FTIR spectroscopy.

  8. Student science enrichment training program. Progress report, June 1, 1991--May 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Sandhu, S.S.

    1992-04-21

    Historically Black Colleges and Universities wing of the United States Department of Energy (DOE) provided funds to Claflin College, Orangeburg, S.C. To conduct a student Science Enrichment Training Program for a period of six weeks during 1991 summer. Thirty participants were selected from a pool of applicants, generated by the High School Seniors and Juniors and the Freshmen class of 1990-1991 at Claflin College. The program primarily focused on high ability students, with potential for Science, Mathematics and Engineering Careers. The major objectives of the program were W to increase the pool of well qualified college entering minority students who will elect to go in Physical Sciences and Engineering and (II) to increase the enrollment in Chemistry and Preprofessional-Pre-Med, Pre-Dent, etc.-majors at Claflin College by including the Claflin students to participate in summer academic program. The summer academic program consisted of Chemistry and Computer Science training. The program placed emphasis upon laboratory experience and research. Visits to Scientific and Industrial laboratories were arranged. Guest speakers which were drawn from academia, industry and several federal agencies, addressed the participants on the future role of Science in the industrial growth of United States of America. The guest speakers also acted as role models for the participants. Several videos and films, emphasizing the role of Science in human life, were also screened.

  9. Acute effecten van verhoogde luchtverontreiniging tijdens de winter van 1990-1991 op de luchtwegen van basisschoolkinderen

    NARCIS (Netherlands)

    Fischer PH; Janssen NAH; Lebret E

    1993-01-01

    During the period 15-11-1990 to 1-4-1991 an epidemiologic study was conducted on the relation between air pollution and respiratory health of school children. Pulmonary function was measured by spirometry every second week and by daily peakflow measurements. During the observation period an episod

  10. Water Science and Technology Board. Annual report 1991

    Energy Technology Data Exchange (ETDEWEB)

    1995-01-01

    This report summarizes the activities of the Water Science and Technology Board during 1991. The WSTB is intended to be a dynamic forum, a mechanism by which the broad community of water science, technology, and policy professionals can help assure high-quality national water programs. The principal products of WSTB studies are written reports which cover a wide range of water resources issues of current national concern. A few recent examples are: Restoration of aquatic ecosystems - science, technologies and public policy; Water transfers in the West - efficiency, equity and the environment; Opportunities in the hydrologic sciences; and Ground water models - scientific and regulatory applications. Projects completed, ongoing studies and published reports are described in detail in their respective sections of this report.

  11. Increased symptom reporting persists in 1990-1991 Gulf War veterans 20 years post deployment.

    Science.gov (United States)

    Gwini, Stella M; Forbes, Andrew B; Kelsall, Helen L; Ikin, Jillian F; Sim, Malcolm R

    2015-12-01

    Following the 1990-1991 Gulf War, Gulf War veterans (veterans) reported health symptoms more commonly than non-deployed groups. This article examines symptom persistence, incidence and prevalence 20 years on. In 2000-2003 and 2011-2012, a 63-item symptom checklist was administered to 697 veterans and 659 comparison group. Symptomatology was compared using log-binomial regression. Both veterans and comparison group reported significantly increased prevalence (3-52%) over time in more than half the symptoms, with a similar overall rate of increase. Half the symptoms had higher incidence (risk-ratios ranged 1.43-1.50) and a quarter were more persistent (risk-ratios ranged 1.12-1.20) in veterans than the comparison group. Symptomatology increased in both groups over time, but persisted to a similar extent and had higher incidence among veterans than the comparison group. The gap in symptom prevalence between the two groups remained unchanged. These findings suggest enduring health consequences of Gulf War service. © 2015 Commonwealth of Australia. American Journal of Industrial Medicine © 2015 Wiley Periodicals, Inc.

  12. EG & G Mount Plant, December 1990 and January 1991, D & D soil box sampling

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-04-01

    Six hundred eighty-two (682) containers of soil were generated at Mound Plant between April 1 and October 31, 1990 as a result of the excavation of soils containing plutonium-238 at two ongoing Decontamination and Decommissioning (D&D) Program sites; these areas are known as Area 14, the waste transfer system (WTS) hillside, and Area 17, the Special Metallurgical (SM) Building Area. The soils from these areas are part of the Mound Plant waste stream number AMDM-000000010, Contaminated Soil, and are proposed for shipment to the Nevada Test Site (NTS) for disposal as low-level radioactive waste. These containers of soil are currently in storage at Mound Plant. The purpose of this sampling and analysis was to demonstrate that the D&D soils comply with the waste acceptance requirements of the NTS, as presented In Nevada Test Site Defense Waste Acceptance Criteria, Certification, and Transfer Requirements (DOE 1988). The sealed waste packages, constructed of wood or metal, are currently being stored In Building 31 and at other locations throughout the Mound Plant. For additional historical information concerning the D&D soils, Including waste stream evaluations and past sampling data see the Sampling and Analysis Plan for Mound Plant D&D Soils Packages (EG&G 1991).

  13. Children of divorce in the 1990s: an update of the Amato and Keith (1991) meta-analysis.

    Science.gov (United States)

    Amato, P R

    2001-09-01

    The present study updates the P. R. Amato and B. Keith (1991) meta-analysis of children and divorce with a new analysis of 67 studies published in the 1990s. Compared with children with continuously married parents, children with divorced parents continued to score significantly lower on measures of academic achievement, conduct, psychological adjustment, self-concept, and social relations. After controlling for study characteristics, curvilinear trends with respect to decade of publication were present for academic achievement, psychological well-being, self-concept, and social relations. For these outcomes, the gap between children with divorced and married parents decreased during the 1980s and increased again during the 1990s.

  14. Current meter components and other data from FIXED PLATFORMS from the Chukchi Sea from 27 August 1990 to 05 October 1991 (NODC Accession 9300039)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter components data were collected from FIXED PLATFORMS in the Chukchi Sea from 27 August 1990 to 05 October 1991. Data were collected by the Pacific...

  15. Environmental Sciences Division annual progress report for period ending September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-01

    This progress report summarizes the research and development activities conducted in the Environmental Sciences Division of Oak Ridge National Laboratory during the period October 1, 1990, through September 30, 1991. The report is structured to provide descriptions of current activities and accomplishments in each of the division`s major organizational units. Following the sections describing the organizational units is a section devoted to lists of information necessary to convey the scope of the work in the division. The Environmental Sciences Division (ESD) at Oak Ridge National Laboratory (ORNL) conducts environmental research and analyses associated with both energy technology development and the interactions between people and the environment. The division engages in basic and applied research for a diverse list of sponsors. While the US Department of Energy (DOE) is the primary sponsor ESD staff also perform research for other federal agencies, state agencies, and private industry. The division works collaboratively with federal agencies, universities, and private organizations in achieving its research objectives and hosts a large number of visiting investigators from these organizations. Given the diverse interdisciplinary specialization of its staff, ESD provides technical expertise on complex environmental problems and renders technical leadership for major environmental issues of national and local concern. This progress report highlights many of ESD`s accomplishment in these and other areas in FY 1991.

  16. Environmental Sciences Division annual progress report for period ending September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-01

    This progress report summarizes the research and development activities conducted in the Environmental Sciences Division of Oak Ridge National Laboratory during the period October 1, 1990, through September 30, 1991. The report is structured to provide descriptions of current activities and accomplishments in each of the division's major organizational units. Following the sections describing the organizational units is a section devoted to lists of information necessary to convey the scope of the work in the division. The Environmental Sciences Division (ESD) at Oak Ridge National Laboratory (ORNL) conducts environmental research and analyses associated with both energy technology development and the interactions between people and the environment. The division engages in basic and applied research for a diverse list of sponsors. While the US Department of Energy (DOE) is the primary sponsor ESD staff also perform research for other federal agencies, state agencies, and private industry. The division works collaboratively with federal agencies, universities, and private organizations in achieving its research objectives and hosts a large number of visiting investigators from these organizations. Given the diverse interdisciplinary specialization of its staff, ESD provides technical expertise on complex environmental problems and renders technical leadership for major environmental issues of national and local concern. This progress report highlights many of ESD's accomplishment in these and other areas in FY 1991.

  17. Rudiments of materials science

    CERN Document Server

    Pillai, SO

    2007-01-01

    Writing a comprehensive book on Materials Science for the benefit of undergraduate courses in Science and Engineering was a day dream of the first author, Dr. S.O. Pillai for a long period. However, the dream became true after a lapse of couple of years. Lucid and logical exposition of the subject matter is the special feature of this book.

  18. Community Radiation Monitoring Program; Annual report, October 1, 1990--September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, E.N.; McArthur, R.D.

    1992-06-01

    The Community Radiation Monitoring Program is a cooperative effort between the US Department of Energy (DOE), the US Environmental Protection Agency (EPA), the Desert Research Institute (DRI), a division of the University and Community College System of Nevada, and the Nuclear Engineering Laboratory of the University of Utah (U of U). This eleventh year of the program began in the summer of 1991 and the work continues as an integral part of the DOE-sponsored long-term offsite radiological monitoring effort that has been conducted by EPA and its predecessors since the inception of nuclear testing at the Nevada Test Site (NTS). The primary objectives of this program are still to increase the understanding by the people who live in the area surrounding the NTS of the activities for which the DOE is responsible, to enhance the performance of radiological sampling and monitoring, and to inform all concerned of the results of those efforts. One of the primary methods used to improve the communication link with the potentially impacted area has been the hiring and training of local citizens as Managers and program representatives in 19 communities adjacent to and downwind from the NTS. These Managers, active science teachers wherever possible, have succeeded, through their training, experience, community standing, and effort, in becoming a very visible, able and valuable asset in this link.

  19. Materials Science Laboratory

    Science.gov (United States)

    Jackson, Dionne

    2005-01-01

    The NASA Materials Science Laboratory (MSL) provides science and engineering services to NASA and Contractor customers at KSC, including those working for the Space Shuttle. International Space Station. and Launch Services Programs. These services include: (1) Independent/unbiased failure analysis (2) Support to Accident/Mishap Investigation Boards (3) Materials testing and evaluation (4) Materials and Processes (M&P) engineering consultation (5) Metrology (6) Chemical analysis (including ID of unknown materials) (7) Mechanical design and fabrication We provide unique solutions to unusual and urgent problems associated with aerospace flight hardware, ground support equipment and related facilities.

  20. Materials science and engineering

    Energy Technology Data Exchange (ETDEWEB)

    Lesuer, D.R.

    1997-02-01

    During FY-96, work within the Materials Science and Engineering Thrust Area was focused on material modeling. Our motivation for this work is to develop the capability to study the structural response of materials as well as material processing. These capabilities have been applied to a broad range of problems, in support of many programs at Lawrence Livermore National Laboratory. These studies are described in (1) Strength and Fracture Toughness of Material Interfaces; (2) Damage Evolution in Fiber Composite Materials; (3) Flashlamp Envelope Optical Properties and Failure Analysis; (4) Synthesis and Processing of Nanocrystalline Hydroxyapatite; and (5) Room Temperature Creep Compliance of Bulk Kel-E.

  1. Earth Sciences Division annual report 1990

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-06-01

    This Annual Report presents summaries of selected representative research activities grouped according to the principal disciplines of the Earth Sciences Division: Reservoir Engineering and Hydrogeology, Geology and Geochemistry, and Geophysics and Geomechanics. Much of the Division`s research deals with the physical and chemical properties and processes in the earth`s crust, from the partially saturated, low-temperature near-surface environment to the high-temperature environments characteristic of regions where magmatic-hydrothermal processes are active. Strengths in laboratory and field instrumentation, numerical modeling, and in situ measurement allow study of the transport of mass and heat through geologic media -- studies that now include the appropriate chemical reactions and the hydraulic-mechanical complexities of fractured rock systems. Of particular note are three major Division efforts addressing problems in the discovery and recovery of petroleum, the application of isotope geochemistry to the study of geodynamic processes and earth history, and the development of borehole methods for high-resolution imaging of the subsurface using seismic and electromagnetic waves. In 1989 a major DOE-wide effort was launched in the areas of Environmental Restoration and Waste Management. Many of the methods previously developed for and applied to deeper regions of the earth will in the coming years be turned toward process definition and characterization of the very shallow subsurface, where man-induced contaminants now intrude and where remedial action is required.

  2. Comparing the cancer in Ninawa during three periods (1980-1990, 1991-2000, 2001-2010 using Poisson regression

    Directory of Open Access Journals (Sweden)

    Muzahem Mohammed Yahya AL-Hashimi

    2013-01-01

    Full Text Available Background: Iraq fought three wars in three consecutive decades, Iran-Iraq war (1980-1988, Persian Gulf War in 1991, and the Iraq′s war in 2003. In the nineties of the last century and up to the present time, there have been anecdotal reports of increase in cancer in Ninawa as in all provinces of Iraq, possibly as a result of exposure to depleted uranium used by American troops in the last two wars. This paper deals with cancer incidence in Ninawa, the most importance province in Iraq, where many of her sons were soldiers in the Iraqi army, and they have participated in the wars. Materials and Methods: The data was derived from the Directorate of Health in Ninawa. The data was divided into three sub periods: 1980-1990, 1991-2000, and 2001-2010. The analyses are performed using Poisson regressions. The response variable is the cancer incidence number. Cancer cases, age, sex, and years were considered as the explanatory variables. The logarithm of the population of Ninawa is used as an offset. The aim of this paper is to model the cancer incidence data and estimate the cancer incidence rate ratio (IRR to illustrate the changes that have occurred of incidence cancer in Ninawa in these three periods. Results: There is evidence of a reduction in the cancer IRR in Ninawa in the third period as well as in the second period. Our analyses found that breast cancer remained the first common cancer; while the lung, trachea, and bronchus the second in spite of decreasing as dramatically. Modest increases in incidence of prostate, penis, and other male genitals for the duration of the study period and stability in incidence of colon in the second and third periods. Modest increases in incidence of placenta and metastatic tumors, while the highest increase was in leukemia in the third period relates to the second period but not to the first period. The cancer IRR in men was decreased from more than 33% than those of females in the first period, more than 39

  3. Annual report 1991 - Science and Engineering Alliance, Inc.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-02-21

    Nineteen ninety-one was a busy and productive year for the Science and Engineering Alliance (SEA). This report covers the major programs and activities of the SEA during the fiscal year 1991 (the year ending September 30, 1991), which was the first year of operation. Where warranted, the report highlights some of the events from the last quarter of the calendar year. The SEA is a non-profit consortium of four Historically Black Colleges and Universities. The SEA members are Alabama A&M University (Normal, Alabama); Jackson State University (Jackson, Mississippi); Prairie View A&M University (Prairie View, Texas); and Southern University and A&M College (Baton Rouge, Louisiana). The SEA`s mission is to help increase the number of well-qualified minority scientists for the next century and beyond, and to provide input into the research and development needs of the nation. The SEA collaborates on research projects with government agencies, national laboratories, private foundations, industry and other universities in a broad range of technical areas.

  4. Chemical Sciences Division annual report, 1990

    Energy Technology Data Exchange (ETDEWEB)

    1991-08-01

    This report contains sections on the following topics: photochemistry of materials in the stratosphere, energy transfer and structural studies of molecules on surfaces, crossed molecular beams, molecular interactions, theory of atomic and molecular collision processes, selective photochemistry, photodissociation of free radicals, physical chemistry with emphasis on thermodynamic properties, chemical physics at the high photon energies, high-energy atomic physics, atomic physics, high-energy oxidizers and delocalized-electron solids, catalytic hydrogenation of CO, transition metal-catalyzed conversion of CO, NO, H{sub 2}, and organic molecules to fuels and petrochemicals, formation of oxyacids of sulfur from SO{sub 2}, potentially catalytic and conducting polyorganometallics, actinide chemistry, and molecular thermodynamics for phase equilibria in mixtures.

  5. Chemical Sciences Division annual report, 1990

    Energy Technology Data Exchange (ETDEWEB)

    1991-08-01

    This report contains sections on the following topics: photochemistry of materials in the stratosphere, energy transfer and structural studies of molecules on surfaces, crossed molecular beams, molecular interactions, theory of atomic and molecular collision processes, selective photochemistry, photodissociation of free radicals, physical chemistry with emphasis on thermodynamic properties, chemical physics at the high photon energies, high-energy atomic physics, atomic physics, high-energy oxidizers and delocalized-electron solids, catalytic hydrogenation of CO, transition metal-catalyzed conversion of CO, NO, H{sub 2}, and organic molecules to fuels and petrochemicals, formation of oxyacids of sulfur from SO{sub 2}, potentially catalytic and conducting polyorganometallics, actinide chemistry, and molecular thermodynamics for phase equilibria in mixtures.

  6. Northwest Montana Libby/Hungry Horse Dams Wildlife Mitigation; Columbian Sharp-Tailed Grouse, 1990-1991 Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Cope, Michael G. [Montana State Univ., Bozeman, MT (United States)]|[Montana Dept. of Fish, Wildlife and Parks, Kalispell, MT (United States)

    1992-07-01

    Distribution, habitat use and survival of transplanted Columbian sharp-tailed grouse in the Tobacco Plains, Montana were studied from April, 1990 to August, 1991. For transplant purposes, 12 grouse (5 female and 7 male) were trapped on dancing grounds near Douglas Lake, British Columbia, Canada during spring, 1990. In April, 1991, trapping of 4 female and 2 male grouse for transplant occurred on the Sand Creek Wildlife Management Area in southeast Idaho while 3 additional males were transplanted from Douglas Lake. Minimum annual survival of transplanted grouse in the Tobacco Plains is relatively high (47%). High survival is possibly due to 2 factors: (1) topography and habitat characteristics that discourage dispersal and (2) the presence of limited but relatively good habitat. Two of 18 radio-equipped grouse dispersed out of the study area, while 2 others survived in the area for over 590 days. A negative correlation in distances moved between consecutive relocations and length of survival was seen in radio-equipped grouse in this study. Data collected during this study showed the importance of habitat associated with the Dancing Prairie Preserve. Three of 5 females transplanted in 1990 attempted to nest after being released. Nesting and brood rearing sites were characterized by dense grass cover with an average effective height {ge}20 cm. Shrub cover was associated only with brood rearing sites. Overall habitat use by transplanted Columbian Sharp-tailed grouse showed an apparent avoidance of agricultural land and use of other habitat types in proportion to their availability.

  7. Materials science and engineering

    Energy Technology Data Exchange (ETDEWEB)

    Holden, T.M.

    1995-10-01

    The science-based stockpile stewardship program emphasizes a better understanding of how complex components function through advanced computer calculations. Many of the problem areas are in the behavior of materials making up the equipment. The Los Alamos Neutron Science Center (LANSCE) can contribute to solving these problems by providing diagnostic tools to examine parts noninvasively and by providing the experimental tools to understand material behavior in terms of both the atomic structure and the microstructure. Advanced computer codes need experimental information on material behavior in response to stress, temperature, and pressure as input, and they need benchmarking experiments to test the model predictions for the finished part.

  8. The Historically Black Colleges and Universities/Minority Institutions Environmental Technology and Waste Management Consortium annual report, 1990--1991

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1991-12-31

    The HBCU/MI Environmental Technology and Waste Management Consortium was established in January 1990, through a Memorandum of Understanding (MOU) among the member institutions. This group of research-oriented Historically Black Colleges and Universities and Minority Institutions (HBCU/MI) agreed to work together to initiate research, technology development and education programs to address the nation`s critical environmental problems. As a group the HBCU/MI Consortium is uniquely positioned to reach women and the minority populations of African Americans, Hispanics and American Indians. As part of their initial work, they developed the Research, Education, and Technology Transfer (RETT) Plan to actualize the Consortium`s guiding principles. In addition to developing a comprehensive research agenda, four major programs were begun to meet these goals. This report summarizes the 1990--1991 progress.

  9. EDITORIAL: Computational materials science Computational materials science

    Science.gov (United States)

    Kahl, Gerhard; Kresse, Georg

    2011-10-01

    Special issue in honour of Jürgen Hafner On 30 September 2010, Jürgen Hafner, one of the most prominent and influential members within the solid state community, retired. His remarkably broad scientific oeuvre has made him one of the founding fathers of modern computational materials science: more than 600 scientific publications, numerous contributions to books, and a highly cited monograph, which has become a standard reference in the theory of metals, witness not only the remarkable productivity of Jürgen Hafner but also his impact in theoretical solid state physics. In an effort to duly acknowledge Jürgen Hafner's lasting impact in this field, a Festsymposium was held on 27-29 September 2010 at the Universität Wien. The organizers of this symposium (and authors of this editorial) are proud to say that a large number of highly renowned scientists in theoretical condensed matter theory—co-workers, friends and students—accepted the invitation to this celebration of Hafner's jubilee. Some of these speakers also followed our invitation to submit their contribution to this Festschrift, published in Journal of Physics: Condensed Matter, a journal which Jürgen Hafner served in 2000-2003 and 2003-2006 as a member of the Advisory Editorial Board and member of the Executive Board, respectively. In the subsequent article, Volker Heine, friend and co-worker of Jürgen Hafner over many decades, gives an account of Hafner's impact in the field of theoretical condensed matter physics. Computational materials science contents Theoretical study of structural, mechanical and spectroscopic properties of boehmite (γ-AlOOH) D Tunega, H Pašalić, M H Gerzabek and H Lischka Ethylene epoxidation catalyzed by chlorine-promoted silver oxide M O Ozbek, I Onal and R A Van Santen First-principles study of Cu2ZnSnS4 and the related band offsets for photovoltaic applicationsA Nagoya, R Asahi and G Kresse Renormalization group study of random quantum magnetsIstván A Kovács and

  10. Fietsongevallen bij kinderen in Nederland in 1990/1991: tijd voor fietshelmen [Bicycle accidents of children in the Netherlands in 1990/1991; time for cycle helmets

    NARCIS (Netherlands)

    Hirasing, R.A.; Verloove-Vanhorick, S.P.; Kampen, L.T.B. van

    1994-01-01

    Objective. To assess the possibility of preventing consequences of bicycle accidents. Design. Retrospective study. Setting. The Netherlands. Material and method. The data on mortality and hospital admissions of children aged 0-14 years were analysed. The data on traffic accident fatalities were

  11. Water quality and contaminant evaluation at Union Slough National Wildlife Refuge, 1990 and 1991

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — In 1990 sediment and water samples were collected at five outlets in Union Slough National Wildlife Refuge. Forty eight hour sediment bioassay results revealed...

  12. Using materials science.

    Science.gov (United States)

    Baker, W O

    1981-01-23

    The science of the solid state has joined nuclear science and molecular biology as a field of major importance in the latter half of the 20th century. It took particular shape during the genesis of solid-state electronics and the post-transistor era of integrated circuits for telecommunications, computers, and digital signal machines. However, these developments were soon joined by techniques from the ancient fields of metallurgy and ceramics and contributions from the more current fields of synthetic polymers, rubbers, plastics, and modified bioorganic substances. This vast realm was characterized by a National Academy of Sciences study of the 1970's as "materials science and engineering." The public, as well as the scientific and engineering community, are currently concerned about the uses of research and development and the applications of knowledge for national progress. Consideration is given here to how well we are using the science of materials for industrial strength and such governmental objectives as national security and energy economy.

  13. Fietsongevallen bij kinderen in Nederland in 1990/1991 : tijd voor fietshelmen.

    NARCIS (Netherlands)

    Hirasing, R.A. Verloove-Vanhorick, S.P. & Kampen, L.T.B. van

    1994-01-01

    The data on mortality and hospital admissions for children aged 0-14 years were analysed. In 1991, 82 children (1-14 years) died from the consequences of a traffic accident. Most of them died after a bicycle accident. The largest category of hospital admissions (46%) in the age group 0-14 years was

  14. Lasers in materials science

    CERN Document Server

    Ossi, Paolo; Zhigilei, Leonid

    2014-01-01

    This book covers various aspects of lasers in materials science, including a comprehensive overview on basic principles of laser-materials interactions and applications enabled by pulsed laser systems.  The material is organized in a coherent way, providing the reader with a harmonic architecture. While systematically covering the major current and emerging areas of lasers processing applications, the Volume provides examples of targeted modification of material properties achieved through careful control of the processing conditions and laser irradiation parameters. Special emphasis is placed on specific strategies aimed at nanoscale control of material structure and properties to match the stringent requirements of modern applications.  Laser fabrication of novel nanomaterials, which expands to the domains of photonics, photovoltaics, sensing, and biomedical applications, is also discussed in the Volume. This book assembles chapters based on lectures delivered at the Venice International School on Lasers...

  15. Data from synoptic water-quality studies on the Colorado River in the Grand Canyon, Arizona, November 1990 and June 1991

    Science.gov (United States)

    Taylor, H.E.; Peart, D.B.; Antweiler, R.C.; Brinton, T.I.; Campbell, W.L.; Barbarino, J.R.; Roth, D.A.; Hart, R.J.; Averett, R.C.

    1996-01-01

    Two water-quality synoptic studies were made on the Colorado River in the Grand Canyon, Arizona. Field measurements and the collection of water samples for laboratory analysis were made at 10 mainstem and 6 tributary sites every 6 hours for a 48-hour period on November 5-6, 1990, and again on June 18-20, 1991. Field measurements included discharge, alkalinity, water temperature, light penetration, pH, specific conductance, and dissolved oxygen. Water samples were collected for the laboratory analysis of major and minor ions (calcium, magnesium, sodium, potassium, strontium, chloride, sulfate, silica as SiO2), trace elements (aluminum, arsenic, boron, barium, beryllium, cadmium, cobalt, chromium, copper, iron, lead, lithium, manganese, molybdenum, nickel, selenium, thallium, uranium, vanadium and zinc), and nutrients (phosphate, nitrate, ammonium, nitrite, total dissolved nitrogen, total dissolved phosphorus and dissolved organic carbon). Biological measurements included drift (benthic invertebrates and detrital material), and benthic invertebrates from the river bottom.

  16. Department of Petroleum Engineering and Center for Petroleum and Geosystems Engineering annual report, 1990--1991 academic year

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-31

    The Department of Petroleum Engineering at The University of Texas at Austin is one of more than 20 such departments in the United States and more than 40 worldwide. The department has more than 20 faculty members and, as of the fall of 1990, 146 undergraduate and 156 graduate students. During the 1990--91 academic year, undergraduate enrollment is up slightly from the several downturns that began in 1986; graduate enrollment continues to increase, significantly in the number of Ph.D. candidates enrolled. The 1990--91 academic year was one of consolidation of gains. A remote teaching program in the Midland-Odessa area was initiated. During 1991, the Center for Petroleum and Geosystems Engineering (CPGE) continued its large, diversified research activities related to oil, gas and geopressured/geothermal energy production, energy and mineral resources analysis, and added new research projects in other areas such as groundwater remediation. Many of these research projects included interdisciplinary efforts involving faculty, research scientists and graduate students in chemistry, mathematics, geology, geophysics, engineering mechanics, chemical engineering, microbiology and other disciplines. Several projects were undertaken in cooperation with either the Bureau of Economic Geology or the Institute for Geophysics at The University of Texas at Austin. Collaborative research projects with scientists at Brookhaven National Laboratory, Los Alamos National Laboratory, Rice University, and Sandia National Laboratory were also initiated. About 43 companies from seven countries around the world continued to provide the largest portion of research funding to CPGE.

  17. Department of Petroleum Engineering and Center for Petroleum and Geosystems Engineering annual report, 1990--1991 academic year

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    The Department of Petroleum Engineering at The University of Texas at Austin is one of more than 20 such departments in the United States and more than 40 worldwide. The department has more than 20 faculty members and, as of the fall of 1990, 146 undergraduate and 156 graduate students. During the 1990--91 academic year, undergraduate enrollment is up slightly from the several downturns that began in 1986; graduate enrollment continues to increase, significantly in the number of Ph.D. candidates enrolled. The 1990--91 academic year was one of consolidation of gains. A remote teaching program in the Midland-Odessa area was initiated. During 1991, the Center for Petroleum and Geosystems Engineering (CPGE) continued its large, diversified research activities related to oil, gas and geopressured/geothermal energy production, energy and mineral resources analysis, and added new research projects in other areas such as groundwater remediation. Many of these research projects included interdisciplinary efforts involving faculty, research scientists and graduate students in chemistry, mathematics, geology, geophysics, engineering mechanics, chemical engineering, microbiology and other disciplines. Several projects were undertaken in cooperation with either the Bureau of Economic Geology or the Institute for Geophysics at The University of Texas at Austin. Collaborative research projects with scientists at Brookhaven National Laboratory, Los Alamos National Laboratory, Rice University, and Sandia National Laboratory were also initiated. About 43 companies from seven countries around the world continued to provide the largest portion of research funding to CPGE.

  18. Report to the Governor on Tourism Training, 1990, 1991, 1992, and 1993.

    Science.gov (United States)

    Hawaii State Dept. of Labor and Industrial Relations, Honolulu. Tourism Training Council.

    This document consists of four consecutive annual reports of the Hawaii State Tourism Training Council (TTC) to the Governor of Hawaii. The 1990 report examines a study done in 1989 to assess career advancement opportunities for native Hawaiians in the hotel industry. The study, which was based on a literature review and two rounds of key…

  19. Review of BPA Funded Sturgeon, Resident Fish and Wildlife Projects for 1990/1991.

    Energy Technology Data Exchange (ETDEWEB)

    United States. Bonneville Power Administration.

    1990-12-01

    The Bonneville Power Administration (BPA) held a public meeting on November 19--21, 1991, for the purpose of review, coordination, and consultation of the BPA-funded projects for sturgeon, resident fish, and wildlife in the Columbia River Basin (Basin). The comments received after the meeting were favorable and the participants agreed that the meeting was stimulating and productive. The information exchanged should lead to better coordination with other projects throughout the Basin. This document list the projects by title, the project leaders and BPA's project officers, and an abstract of each leader's presentation.

  20. JPRS Report, Science & Technology, USSR: Materials Science

    Science.gov (United States)

    2015-08-20

    JPRS-UPIS-90-Q03 1 MAY 1990 S#J1%\\ ■ ■■in FOREIGN BROADCAST INFORMATION SERVICE .JPRS Report — 19981021 129 Science & Technology USSR... entity , with average temperature of its own, engaged in heat exchange with the two-phase zone according to the convection law. However, such a model...it represents a definite technological complication and requires separate solution. 7. Problems of mechanizing the loading of the initial blank

  1. Panel 3 - material science

    Energy Technology Data Exchange (ETDEWEB)

    Sarrao, John L [Los Alamos National Laboratory; Yip, Sidney [MIT

    2010-01-01

    In the last decades, NNSA's national security challenge has evolved, and the role of simulation and computation has grown dramatically. The process of certifying nuclear weapons performance has changed from one based on integrated tests to science-based certification in which underground nuclear tests have been replaced by large-scale simulations, appropriately validated with fundamental experimental data. Further, the breadth of national security challenges has expanded beyond stewardship of a nuclear deterrent to a broad range of global and asymmetric threats. Materials challenges are central to the full suite of these national security challenges. Mission requirements demand that materials perform predictably in extreme environments -- high pressure, high strain rate, and hostile irradiation and chemical conditions. Considerable advances have been made in incorporating fundamental materials physics into integrated codes used for component certification. On the other hand, significant uncertainties still remain, and materials properties, especially at the mesoscale, are key to understanding uncertainties that remain in integrated weapons performance codes and that at present are treated as empirical knobs. Further, additional national security mission challenges could be addressed more robustly with new and higher performing materials.

  2. Biological monitoring of Upper Three Runs Creek, Savannah River Site, Aiken County, South Carolina, March 1990--July 1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-01

    In anticipation of the fall 1988 start up of effluent discharges into Upper Three Runs Creek by the F/H Area Effluent Treatment Facility of the Savannah River Site, Aiken, SC, a two and one half year biological study was initiated in June 1987. Upper Three Runs Creek is an intensively studied fourth order stream known for its high species richness. Designed to assess the potential impact of F/H area effluent on the creek, the study included qualitative and quantitative macroinvertebrate stream surveys at five sites (see map), chronic toxicity testing of the effluent, water chemistry and bioaccumulation analysis. In a March 1990 study of the potential impact of F/H Area effluent on the macroinvertebrate communities of Upper Three Runs Creek was extended, with reductions in the number of sites to be sampled and in the frequency of water chemistry sampling. This report presents the results of macroinvertebrate stream surveys at three sites, chronic toxicity testing of the effluent and water chemistry analysis of the three stream sites and the effluent from March 1990 to July 1991.

  3. Biological monitoring of Upper Three Runs Creek, Savannah River Site, Aiken County, South Carolina, March 1990--July 1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-01

    In anticipation of the fall 1988 start up of effluent discharges into Upper Three Runs Creek by the F/H Area Effluent Treatment Facility of the Savannah River Site, Aiken, SC, a two and one half year biological study was initiated in June 1987. Upper Three Runs Creek is an intensively studied fourth order stream known for its high species richness. Designed to assess the potential impact of F/H area effluent on the creek, the study included qualitative and quantitative macroinvertebrate stream surveys at five sites (see map), chronic toxicity testing of the effluent, water chemistry and bioaccumulation analysis. In a March 1990 study of the potential impact of F/H Area effluent on the macroinvertebrate communities of Upper Three Runs Creek was extended, with reductions in the number of sites to be sampled and in the frequency of water chemistry sampling. This report presents the results of macroinvertebrate stream surveys at three sites, chronic toxicity testing of the effluent and water chemistry analysis of the three stream sites and the effluent from March 1990 to July 1991.

  4. Annual Conference Journal NABE '90-'91. Proceedings of the National Association for Bilingual Education Conferences (Tucson, Arizona, 1990; Washington, D.C., 1991).

    Science.gov (United States)

    Malave, Lilliam M., Ed.

    Papers from the 1990 and 1991 conferences of the National Association for Bilingual Education (NABE) are presented, including: "Beyond Socially Naive Bilingual Education: The Effects of Schooling and Ethnolinguistic Vitality of the Community on Additive and Subtractive Bilingualism" (Rodriguez Landry, Real Allard); "Descubriendo la lectura: An…

  5. Analysis of geomagnetic secular variation during 1980-1985 and 1985- 1990, and geomagnetic models proposed for the 1991 revision of the International Geomagnetic Reference Field

    Science.gov (United States)

    Peddie, N.W.

    1992-01-01

    The secular variation of the main geomagnetic field during the periods 1980-1985 and 1985-1990 was analyzed in terms of spherical harmonics up to the eighth degree and order. Data from worldwide magnetic observatories and the Navy's Project MAGNET aerial surveys were used. The resulting pair of secular-variation models was used to update the Definitive Geomagnetic Reference Field (DGRF) model for 1980, resulting in new mainfield models for 1985.0 and 1990.0. These, along with the secular-variation model for 1985-1990, were proposed for the 1991 revision of the International Geomagnetic Reference Field (IGRF). -Author

  6. Energy Materials Coordinating Committee (EMaCC), Fiscal year 1990

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    1991-05-31

    The DOE Energy Materials Coordinating Committee (EMaCC) serves primarily to enhance coordination among the Department's materials programs and to further the effective use of materials expertise within the Department. These functions are accomplished through the exchange of budgetary and planning information among program managers and through technical meetings/workshops on selected topics involving both DOE and major contractors. Four topical subcommittees are established and are continuing their own programs: Structural Ceramics, Electrochemical Technologies, Radioactive Waste Containment, and Superconductivity. In addition, the EMaCC aids in obtaining materialsrelated inputs for both intra- and inter-agency compilations. Membership in the EMaCC is open to any Department organizational unit; participants are appointed by Division or Office Directors. The current active membership is listed on the following four pages. The EMaCC reports to the Director of the Office of Energy Research in his capacity as overseer of the technical programs of the Department. This annual technical report is mandated by the EMaCC terms of reference. This report summarizes EMaCC activities for FY 1990 and describes the materials research programs of various offices and divisions within the Department. The Chairman of EMaCC for FY 1990 was Scott L. Richlen; the Executive Secretary was Dr. Jerry Smith.

  7. Princeton University Plasma Physics Laboratory, Princeton, New Jersey. Annual report, October 1, 1990--September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-31

    This report discusses the following topics: Principal parameters of experimental devices; Tokamak Fusion Test Reactor; Burning Plasma Experiment; Princeton Beta Experiment-Modification; Current Drive Experiment-Upgrade; International Thermonuclear Experimental Reactor; International Collaboration; X-Ray Laser Studies; Hyperthermal Atomic Beam Source; Pure Electron Plasma Experiments; Plasma Processing: Deposition and Etching of Thin Films; Theoretical Studies; Tokamak Modeling; Engineering Department; Environment, Safety, and Health and Quality Assurance; Technology Transfer; Office of Human Resources and Administration; PPPL Patent Invention Disclosures; Office of Resource Management; Graduate Education: Plasma Physics; Graduate Education: Program in Plasma Science and Technology; and Science Education Program.

  8. The Waste-Management Education and Research Consortium (WERC) annual progress report, 1990--1991

    Energy Technology Data Exchange (ETDEWEB)

    None

    1991-02-25

    In February, 1990, the Secretary of Energy, James Watkins approved a grant for a waste (management) education and research consortium program by New Mexico State University (NMSU) to the US Department of Energy (DOE) . This program known by the acronym, WERC'' includes NMSU, the University of New Mexico (UNM), the New Mexico Institute of Mining and Technology (NMIMT), the Los Alamos National Laboratory and the Sandia National Laboratories. The program is designed to provide an integrated approach to the national need via the following: (1) Education in waste management by the Consortium universities resulting in graduate, undergraduate, and associate degrees with concentration in environmental management. The term waste management is used in a broad sense throughout this paper and includes all aspects of environmental management and environmental restoration. (2) Research programs at the leading edge, providing training to faculty and students and feeding into the education programs. (3) Education and research at the campuses, as well as from three field sites. (4) Ties with other multi-disciplinary university facilities. (5) Ties with two National Laboratories located in New Mexico. (6) Technology transfer and education via an existing fiber optic network, a proposed satellite link, and an existing state-wide extension program. (7) An outreach program to interest others in environmental management, especially precollege students, minority students and practitioners in the field. This report summarizes the accomplishments and status at the end of the first year.

  9. Hydrologic data summary for the White Oak Watershed at Oak Ridge National Laboratory, Oak Ridge, Tennessee, October 1990--December 1991

    Energy Technology Data Exchange (ETDEWEB)

    Borders, D.M.; Gregory, S.M.; Clapp, R.B.; Frederick, B.J.; Watts, J.A.

    1992-06-01

    This report summarizes for the 15-month period of October 1990-- December 1991 the available dynamic hydrologic data collected, primarily on the White Oak Creek (WOC) watershed, along with information collected on the surface flow systems that affect the quality or quantity of surface water. The collection of hydrologic data is one component of numerous, ongoing Oak Ridge National Laboratory (ORNL) environmental studies and monitoring programs and is intended to: (1) characterize the quantity and quality of water in the flow systems; (2) assist with the planning and assessment of remedial action activities; and, (3) provide long-term availability of data and quality assurance. Characterization of the hydrology of the WOC watershed is critical for understanding the processes that drive contaminant transport in the watershed. Identification of spatial and temporal trends in hydrologic parameters and mechanisms that affect the movement of contaminants supports the development of interim corrective measures and remedial restoration alternatives. In addition, hydrologic monitoring supports long-term assessment of the effectiveness of remedial actions in limiting the transport of contaminants across Waste Area Grouping (WAG) boundaries and ultimately to the off-site environment. For these reasons, it is of paramount importance to the Environmental Restoration Program (ERP) to collect and report hydrologic data activities that contribute to the Site Investigations component of the ERP. (White Oak Creek is also referred to as Whiteoak'' Creek).

  10. Hydrologic data summary for the White Oak Watershed at Oak Ridge National Laboratory, Oak Ridge, Tennessee, October 1990--December 1991

    Energy Technology Data Exchange (ETDEWEB)

    Borders, D.M.; Gregory, S.M.; Clapp, R.B.; Frederick, B.J.; Watts, J.A.

    1992-06-01

    This report summarizes for the 15-month period of October 1990-- December 1991 the available dynamic hydrologic data collected, primarily on the White Oak Creek (WOC) watershed, along with information collected on the surface flow systems that affect the quality or quantity of surface water. The collection of hydrologic data is one component of numerous, ongoing Oak Ridge National Laboratory (ORNL) environmental studies and monitoring programs and is intended to: (1) characterize the quantity and quality of water in the flow systems; (2) assist with the planning and assessment of remedial action activities; and, (3) provide long-term availability of data and quality assurance. Characterization of the hydrology of the WOC watershed is critical for understanding the processes that drive contaminant transport in the watershed. Identification of spatial and temporal trends in hydrologic parameters and mechanisms that affect the movement of contaminants supports the development of interim corrective measures and remedial restoration alternatives. In addition, hydrologic monitoring supports long-term assessment of the effectiveness of remedial actions in limiting the transport of contaminants across Waste Area Grouping (WAG) boundaries and ultimately to the off-site environment. For these reasons, it is of paramount importance to the Environmental Restoration Program (ERP) to collect and report hydrologic data activities that contribute to the Site Investigations component of the ERP. (White Oak Creek is also referred to as ``Whiteoak`` Creek).

  11. Teaching materials science and engineering

    Indian Academy of Sciences (India)

    Bernhard Ilschner

    2003-06-01

    This paper is written with the intention of simulating discussion on teaching materials science and engineering in the universities. The article illustrates the tasks, priorities, goals and means lying ahead in the teaching of materials science and engineering for a sustainable future.

  12. Thin film cadmium telluride photovoltaic cells. Annual subcontract report, 23 July 1990--31 October 1991

    Energy Technology Data Exchange (ETDEWEB)

    Compaan, A.; Bohn, R. [Toledo Univ., OH (United States)

    1992-04-01

    This report describes research to develop to vacuum-based growth techniques for CdTe thin-film solar cells: (1) laser-driven physical vapor deposition (LDPVD) and (2) radio-frequency (rf) sputtering. The LDPVD process was successfully used to deposit thin films of CdS, CdTe, and CdCl{sub 2}, as well as related alloys and doped semiconductor materials. The laser-driven deposition process readily permits the use of several target materials in the same vacuum chamber and, thus, complete solar cell structures were fabricated on SnO{sub 2}-coated glass using LDPVD. The rf sputtering process for film growth became operational, and progress was made in implementing it. Time was also devoted to enhancing or implementing a variety of film characterization systems and device testing facilities. A new system for transient spectroscopy on the ablation plume provided important new information on the physical mechanisms of LDPVD. The measurements show that, e.g., Cd is predominantly in the neutral atomic state in the plume but with a fraction that is highly excited internally ({ge} 6 eV), and that the typical neutral Cd translational kinetic energies perpendicular to the target are 20 eV and greater. 19 refs.

  13. Science in Counseling Psychology: Reply to Gelso (1991) and Patton and Jackson (1991).

    Science.gov (United States)

    Strong, Stanley R.

    1991-01-01

    Replies to responses to article on theory-driven science and naive empiricism in counseling psychology. Notes that cycle of scientific work entails both context of testing and of discovery. Sees work in context of discovery receiving little emphasis in scientific training. Sees differences in approaches to discovery related to subjectivism versus…

  14. Stratospheric OClO and NO2 measured by groundbased UV/Vis-spectroscopy in Greenland in January and February 1990 and 1991

    Science.gov (United States)

    Roth, A.; Perner, D.

    1994-01-01

    Groundbased UV/Vis-spectroscopy of zenith scattered sunlight was performed at Sondre Stromfjord (Greenland) during Jan/Feb 1990 and Jan/Feb 1991. Considerable amounts of OClO were observed during both campaigns. Maximum OClO vertical column densities at 92 deg solar zenith angle (SZA) were 7.4 x 10(exp 13) molec/sq cm in 1990 and 5.7 x 10(exp 13) molec/sq cm in 1991 (chemical enhancement is included in the calculation of the air mass factor (AMF)). A threshold seems to exist for OClO detection: OClO was detected on every day when the potential vorticity at the 475 K level of potential temperature was higher than 35 x 10(exp -6)Km(exp 2)kg(exp -1)s(exp -1). NO2 vertical columns lower than 1 x 10(exp 15) molec/sq cm were frequently observed in both winters.

  15. [Regulation of terpene metabolism]. Annual progress report, March 15, 1990--March 14, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Croteau, R.

    1991-12-31

    During the last grant period, we have completed studies on the key pathways of monoterpene biosynthesis and catabolism in sage and peppermint, and have, by several lines of evidence, deciphered the rate-limiting step of each pathway. We have at least partially purified and characterized the relevant enzymes of each pathway. We have made a strong case, based on analytical, in vivo, and in vitro studies, that terpene accumulation depends upon the balance between biosynthesis and catabolism, and provided supporting evidence that these processes are developmentally-regulated and very closely associated with senescence of the oil glands. Oil gland ontogeny has been characterized at the ultrastructural level. We have exploited foliar-applied bioregulators to delay gland senescence, and have developed tissue explant and cell culture systems to study several elusive aspects of catabolism. We have isolated pure gland cell clusters and localized monoterpene biosynthesis and catabolism within these structures, and have used these preparations as starting materials for the purification to homogeneity of target ``regulatory`` enzymes. We have thus developed the necessary background knowledge, based on a firm understanding of enzymology, as well as the necessary experimental tools for studying the regulation of monoterpene metabolism at the molecular level. Furthermore, we are now in a position to extend our systematic approach to other terpenoid classes (C{sub 15}-C{sub 30}) produced by oil glands.

  16. Grain Drier Project Report for task 2 dated July 1990 edited 1991, 1992. Follow up report

    Energy Technology Data Exchange (ETDEWEB)

    Frye, S.; Hall, R.; Lee, Myoung; Ouyang, Chieh [and others

    1990-07-01

    One of the original projects undertaken under the cooperative agreement No. DE-FC04-87AL42558 between the Massachusetts Photovoltaic Program and the United States Department of Energy was to design, build, and test a grain drier which utilized solar energy effectively. Different grains have different drying requirements, and the grain drier team chose to design the drier for rice because of the worldwide economic importance of this staple food and also because of the challenges that drying rice presents. Rice loses much of its market value if it is exposed to large temperature changes while drying; therefore, a solar rice drier must be designed so as to try to level the temperature variations which naturally arise from the intermittency of the solar source. The design team committed itself early in the project to a hybrid concept, where solar energy is utilized in two ways: it is captured {open_quote}thermally{close_quote} in a rock-bed which acts at the same time as thermal storage and buffer, and it is converted {open_quote}directly{close_quote} in a small photovoltaic panel which generates electricity to power a small fan to circulate air through the rock-bed and the grain during daylight hours. At night, natural convection drives the air flow. The design of most of the system is flexible, in that the drier can be built with materials available at the intended site, with non-specialized labor. The team has purposely avoided any {open_quote}high tech{close_quote} solution which would increase the drier cost for third-world users. Therefore, the drier design does not incorporate selective surfaces or a vacuum, two common methods of enhancing solar thermal performance. The design does incorporate a small but relatively high value element, the PV panel and fan package. A major part of the group effort was devoted to data acquisition, to analyze the effects of different modifications on the drier performance. The results of the effort are summarized in this report.

  17. Minutes of the Tank Waste Science Panel meeting, November 11--13, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Strachan, D.M. (comp.)

    1992-04-01

    The sixth meeting of the Tank Waste Science Panel was held November 11--13, 1991, in Pasco and Richland, Washington. Participating scientists presented the results of recent work on various aspects of issues relating to the generation and release of gases from Tank 241-SY-101 and the presence of ferrocyanide in other tanks at Hanford. Results are discussed.

  18. Minutes of the Tank Waste Science Panel meeting July 9--1, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Strachan, D.M. (comp.)

    1992-04-01

    The fifth meeting of the Tank Waste Science Panel was held July 9--11, 1991, in Atlanta, Georgia. The subject areas included the generation, retention, and release of gases from Tank 241-SY-101 and the chemistry of ferrocyanide wastes.

  19. Digitized analog boomer seismic-reflection data collected during U.S. Geological Survey cruises Erda 90-1_HC, Erda 90-1_PBP, and Erda 91-3 in Mississippi Sound, June 1990 and September 1991

    Science.gov (United States)

    Bosse, Stephen T.; Flocks, James G.; Forde, Arnell S.

    2017-04-21

    The U.S. Geological Survey (USGS) Coastal and Marine Geology Program has actively collected geophysical and sedimentological data in the northern Gulf of Mexico for several decades, including shallow subsurface data in the form of high-resolution seismic-reflection profiles (HRSP). Prior to the mid-1990s most HRSP data were collected in analog format as paper rolls of continuous profiles up to 25 meters long. A large portion of this data resides in a single repository with minimal metadata. As part of the National Geological and Geophysical Data Preservation Program, scientists at the USGS St. Petersburg Coastal and Marine Science Center are converting the analog paper records to digital format using a large-format continuous scanner.This report, along with the accompanying USGS data release (Bosse and others, 2017), serves as an archive of seismic profiles with headers, converted Society of Exploration Geophysicists Y format (SEG-Y) files, navigation data, and geographic information system data files for digitized boomer seismic-reflection data collected from the Research Vessel (R/V) Erda during two cruises in 1990 and 1991. The Erda 90-1 geophysical cruise was conducted in two legs. The first leg included seismic data collected from the Hancock County region of the Mississippi Sound (Erda 90-1_HC) from June 4 to June 6, 1990. The second leg included seismic data collected from the Petit Bois Pass area of Mississippi Sound (Erda 90-1_PBP) from June 8 to June 9, 1990. The Erda 91-3 cruise occurred between September 12 and September 23, 1991, and surveyed the Mississippi Sound region just west of Horn Island, Mississippi.

  20. United Nations Basic Space Science Initiative (UNBSSI) 1991-2012 and Beyond

    CERN Document Server

    Mathai, A M; Balogh, W R

    2015-01-01

    This paper contains an overview and summary on the achievements of the United Nations basic space science initiative in terms of donated and provided planetariums, astronomical telescopes, and space weather instruments, particularly operating in developing nations. This scientific equipment has been made available to respective host countries, particularly developing nations, through the series of twenty basic space science workshops, organized through the United Nations Programme on Space Applications since 1991. Organized by the United Nations, the European Space Agency (ESA), the National Aeronautics and Space Administration (NASA) of the United States of America, and the Japan Aerospace Exploration Agency (JAXA), the basic space science workshops were organized as a series of workshops that focused on basic space science (1991-2004), the International Heliophysical Year 2007 (2005-2009), and the International Space Weather Initiative (2010-2012) proposed by the Committee on the Peaceful Uses of Outer Spac...

  1. Radioactive materials released from nuclear power plants. Annual report 1991, Volume 12

    Energy Technology Data Exchange (ETDEWEB)

    Tichler, J.; Doty, K.; Congemi, J. [Brookhaven National Lab., Upton, NY (United States)

    1994-05-01

    Releases of radioactive materials in airborne and liquid effluents from commercial light water reactors during 1991 have been compiled and reported. Data on solid waste shipments as well as selected operating information have been included. This report supplements earlier annual reports issued by the former Atomic Energy Commission and the Nuclear Regulatory Commission. The 1991 release data are summarized in tabular form. Data Covering specific radionuclides are summarized.

  2. Current meter data from moored current meter casts in the Pacific Ocean as part of the Equatorial Pacific Ocean Climate Studies (EPOCS) project from 30 April 1990 - 15 May 1991 (NODC Accession 9400005)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the Pacific Ocean from April 30, 1990 to May 15, 1991. Data were submitted by Pacific Marine...

  3. Archive of Digitized Analog Boomer Seismic Reflection Data Collected from the Mississippi-Alabama-Florida shelf During Cruises Onboard the R/V Kit Jones, June 1990 and July 1991

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — In June of 1990 and July of 1991, the U.S. Geological Survey (USGS) conducted geophysical surveys to investigate the shallow geologic framework of the...

  4. Current meter data from moored current meter casts in the Northwest Atlantic Ocean (limit -40 W) as part of the Ocean Dumping project, 24 May 1990 - 17 June 1991 (NODC Accession 9300112)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the Northwest Atlantic Ocean (limit -40 W) from May 24, 1990 to June 17, 1991. Data were...

  5. Current meter data from moored current meter casts in the Northeast Pacific Ocean as part of the Flow Over Abrupt Topography project from 06 January 1990 - 03 December 1991 (NODC Accession 9500077)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Current meter data were collected using moored current meter casts in the Northeast Pacific Ocean from January 6, 1990 to December 3, 1991. Data were submitted by...

  6. Archive of Digitized Analog Boomer Seismic Reflection Data Collected from the Mississippi-Alabama-Florida shelf During Cruises Onboard the R/V Kit Jones, June 1990 and July 1991

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — In June of 1990 and July of 1991, the U.S. Geological Survey (USGS) conducted geophysical surveys to investigate the shallow geologic framework of the...

  7. COP 1990-1991

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Compared nekton densities among 5 natural and 10 created salt marsh sites to test whether these marsh types were functionally equivalent. Created marshes ranged from...

  8. Computer simulation in materials science

    Energy Technology Data Exchange (ETDEWEB)

    Arsenault, R.J.; Beeler, J.R.; Esterling, D.M.

    1988-01-01

    This book contains papers on the subject of modeling in materials science. Topics include thermodynamics of metallic solids and fluids, grain-boundary modeling, fracture from an atomistic point of view, and computer simulation of dislocations on an atomistic level.

  9. Archive of digitized analog boomer seismic-reflection data collected during U.S. Geological Survey cruises Erda 90-1_HC, Erda 90-1_PBP, and Erda 91-3 in Mississippi Sound, June 1990 and September 1991

    Science.gov (United States)

    Bosse, Stephen T.; Flocks, James G.; Forde, Arnell S.

    2017-01-01

    The U.S. Geological Survey Coastal and Marine Geology Program has actively collected geophysical and sedimentological data in the northern Gulf of Mexico for several decades, including shallow subsurface data in the form of high-resolution seismic-reflection profiles (HRSP). Prior to the mid-1990s most HRSP data were collected in analog format as paper rolls of continuous profiles up to 25 meters long. As part of the National Geological and Geophysical Data Preservation Program, scientists at the U.S. Geological Survey St. Petersburg Coastal and Marine Science Center are converting the analog paper records to digital format using a large-format continuous scanner.This data release serves as an archive of seismic profiles with headers, converted SEG-Y files, navigation data, and trackline shapefiles for digitized boomer seismic data collected from the Research Vessel (R/V) Erda during two cruises in 1990 and 1991 (Figure 1). The Erda 90-1 geophysical cruise was conducted in two legs. The first leg included seismic data collected from the Hancock County region of the Mississippi Sound (Erda 90-1_HC) from June 4 to June 6, 1990. The second leg included seismic data collected from the Petit Bois Pass area of Mississippi Sound (Erda 90-1_PBP) from June 8 to June 9, 1990. The Erda 91-3 cruise occurred between September 12 and September 23, 1991 and surveyed the Mississippi Sound region just west of Horn Island, Mississippi. Additional project and data rescue details are included in the associated USGS Data Series 1047.Bosse, S.T., Flocks, J.G., and Forde, A.S., 2017, Digitized analog boomer seismic-reflection data collected during U.S. Geological Survey cruises Erda 90-1_HC, Erda 90-1_PBP, and Erda 91-3 in Mississippi Sound, June 1990 and September 1991: U.S. Geological Survey Data Series 1047, https://doi.org/10.3133/ds1047.

  10. Physical foundations of materials science

    CERN Document Server

    Gottstein, Günter

    2004-01-01

    In this vivid and comprehensible introduction to materials science, the author expands the modern concepts of metal physics to formulate basic theory applicable to other engineering materials, such as ceramics and polymers. Written for engineering students and working engineers with little previous knowledge of solid-state physics, this textbook enables the reader to study more specialized and fundamental literature of materials science. Dozens of illustrative photographs, many of them Transmission Electron Microscopy images, plus line drawings, aid developing a firm appreciation of this complex topic. Hard-to-grasp terms such as "textures" are lucidly explained - not only the phenomenon itself, but also its consequences for the material properties. This excellent book makes materials science more transparent.

  11. Weightless Materials Science

    Science.gov (United States)

    Curtis, Jeremy

    2012-01-01

    Gravity affects everything we do. Only in very recent years have we been able to carry out experiments in orbit around the Earth and see for the first time how things behave in its absence. This has allowed us to understand fundamental processes better and to design new materials using this knowledge. (Contains 6 figures.)

  12. Research in Materials Science

    Science.gov (United States)

    1975-05-31

    236. (1966) 836. 11. Noah Hendelsohn, S.B. Thesis, MIT (Physics, 1974) unpublished; Myron Hale Frommer , Ph.D. Thesis, MIT (Metallurgy and Materials...iiiK±\\fju\\mki^m\\IUW<MfW.imK-VlWW I 1 ■77- 12. J. Bostock, Kofi Agyeman, M.ll. Frommer , and M.L.A. MacVicar, J. Appl. Phys. 44 (1973) 5567. 13. W. N

  13. Materials Science in Ancient Rome

    CERN Document Server

    Sparavigna, Amelia Carolina

    2011-01-01

    Two books, the "De Architectura" by Vitruvius and the "Naturalis Historia" by Pliny the Elder, give us a portrait of the Materials Science, that is, the knowledge of materials, in Rome at the beginning of the Empire. Here, I am reporting some very attractive contents that we can find in these books. The reader will see the discussion proposed in fours case studies: concretes, coatings, amorphous materials and colloidal crystals, to describe them in modern words.

  14. Material Science Smart Coatings

    Energy Technology Data Exchange (ETDEWEB)

    Rubinstein, A. I. [Univ. of Nebraska Medical Center, Omaha, NE (United States); Sabirianov, R. F. [Univ. of Nebraska Medical Center, Omaha, NE (United States); Namavar, Fereydoon [Univ. of Nebraska Medical Center, Omaha, NE (United States)

    2014-07-01

    The contribution of electrostatic interactions to the free energy of binding between model protein and a ceramic implant surface in the aqueous solvent, considered in the framework of the nonlocal electrostatic model, is calculated as a function of the implant low-frequency dielectric constant. We show that the existence of a dynamically ordered (low-dielectric) interfacial solvent layer at the protein-solvent and ceramic-solvent interface markedly increases charging energy of the protein and ceramic implant, and consequently makes the electrostatic contribution to the protein-ceramic binding energy more favorable (attractive). Our analysis shows that the corresponding electrostatic energy between protein and oxide ceramics depends nonmonotonically on the dielectric constant of ceramic, εC. Obtained results indicate that protein can attract electrostatically to the surface if ceramic material has a moderate εC below or about 35 (in particularly ZrO2 or Ta2O5). This is in contrast to classical (local) consideration of the solvent, which demonstrates an unfavorable electrostatic interaction of protein with typical metal oxide ceramic materialsC>10). Thus, a solid implant coated by combining oxide ceramic with a reduced dielectric constant can be beneficial to strengthen the electrostatic binding of the protein-implant complex.

  15. Temporal variations in the constituents of volcanic ash and adherent water-soluble components in the Unzen Fugendake eruption during 1990-1991

    Science.gov (United States)

    Nogami, K.; Hirabayashi, J.; Ohba, T.; Ossaka, J.; Yamamoto, M.; Akagi, S.; Ozawa, T.; Yoshida, M.

    2001-07-01

    A change in the chemical compositions of volcanic gases is one of the noticeable phenomena that frequently occurs prior to an eruption. Analysis of the water-soluble components adhering to volcanic ash is available for remote monitoring of volcanic gases from inaccessible volcanoes. It is a secure method for monitoring volcanic activity without using particular devices. Prolonged volcanic eruption at the Unzen Fugendake volcano from 1990 to 1995 started with a phreatic eruption after 198 years of dormancy. Volcanic activity changed from a phreatic and phreatomagmatic eruption to a magmatic eruption with pyroclastic flows in May 1991. The relationship between the chemical composition of volcanic ash and the contents of the water-soluble components adhering to it are discussed in relation to the early stage of the long-term eruption. Volcanic ash ejected by phreatic and phreatomagmatic eruption before dome formation was the product of the alteration in the volcanoclastic materials beneath the surface. The ash had a high content of water-soluble components, which was caused by the absorption of hydrogen chloride and sulfur dioxide gases from magma into wet debris before dome formation. Volcanic ashes which were generated by pyroclastic flows after dome formation were fresh lava fragments. While the contents of water-soluble sulfate adhering to the ash noticeably decreased, those of water-soluble chloride adhering to the ash hardly decreased. The considerable decrease in the contents of water-soluble sulfate was caused by the reaction of volcanic gases with dry lava fragments. Contrary to this, the concentration of hydrogen chloride gas in ash clouds was extremely high, which obstructed the decrease in the water-soluble chloride content in the ash. Volatility of chlorine and sulfur from volcanic rock suggests that the inner temperature of pyroclastic flows was higher than 600~700° C at least.

  16. Transportation accidents/incidents involving radioactive materials (1971--1991)

    Energy Technology Data Exchange (ETDEWEB)

    Cashwell, C. E. [Applied Physics, Inc., Albuquerque, NM (United States); McClure, J. D. [Sandia National Labs., Albuquerque, NM (United States)

    1992-01-01

    The Radioactive Materials Incident Report (RMIR) database contains information on transportation-related accidents and incidents involving radioactive materials that have occurred in the United States. The RMIR was developed at Sandia National Laboratories (SNL) to support its research and development program efforts for the US Department of Energy (DOE). This paper will address the following topics: background information on the regulations and process for reporting a hazardous materials transportation incident, overview data of radioactive materials transportation accidents and incidents, and additional information and summary data on how packagings have performed in accident conditions.

  17. Biological materials: a materials science approach.

    Science.gov (United States)

    Meyers, Marc A; Chen, Po-Yu; Lopez, Maria I; Seki, Yasuaki; Lin, Albert Y M

    2011-07-01

    The approach used by Materials Science and Engineering is revealing new aspects in the structure and properties of biological materials. The integration of advanced characterization, mechanical testing, and modeling methods can rationalize heretofore unexplained aspects of these structures. As an illustration of the power of this methodology, we apply it to biomineralized shells, avian beaks and feathers, and fish scales. We also present a few selected bioinspired applications: Velcro, an Al2O3-PMMA composite inspired by the abalone shell, and synthetic attachment devices inspired by gecko.

  18. Youth Solid Waste Educational Materials List, November 1991.

    Science.gov (United States)

    Cornell Univ., Ithaca, NY. Cooperative Extension Service.

    This guide provides a brief description and ordering information for approximately 300 educational materials for grades K-12 on the subject of solid waste. The materials cover a variety of environmental issues and actions related to solid waste management. Entries are divided into five sections including audiovisual programs, books, magazines,…

  19. Materials and Components Technology Division research summary, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-04-01

    This division has the purpose of providing a R and D capability for design, fabrication, and testing of high-reliability materials, components, and instrumentation. Current divisional programs are in support of the Integral Fast Reactor, life extension for light water reactors, fuels development for the new production reactor and research and test reactors, fusion reactor first-wall and blanket technology, safe shipment of hazardous materials, fluid mechanics/materials/instrumentation for fossile energy systems, and energy conservation and renewables (including tribology, high- temperature superconductivity). Separate abstracts have been prepared for the data base.

  20. Materials and Components Technology Division research summary, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-04-01

    This division has the purpose of providing a R and D capability for design, fabrication, and testing of high-reliability materials, components, and instrumentation. Current divisional programs are in support of the Integral Fast Reactor, life extension for light water reactors, fuels development for the new production reactor and research and test reactors, fusion reactor first-wall and blanket technology, safe shipment of hazardous materials, fluid mechanics/materials/instrumentation for fossile energy systems, and energy conservation and renewables (including tribology, high- temperature superconductivity). Separate abstracts have been prepared for the data base.

  1. [Lawrence Berkeley Laboratory] Chemical Sciences Division annual report 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-09-01

    Summaries are given of research in the following fields: photochemistry of materials in stratosphere, energy transfer and structural studies of molecules on surfaces, laser sources and techniques, crossed molecular beams, molecular interactions, theory of atomic and molecular collision processes, selective photochemistry, photodissociation of free radicals, physical chemistry with emphasis on thermodynamic properties, chemical physics at high photon energies, high-energy atomic physics, atomic physics, high-energy oxidizers and delocalized-electron solids, catalytic hydrogenation of CO, transition metal-catalyzed conversion of CO, NO, H{sub 2}, and organic molecules to fuels and petrochemicals, formation of oxyacids of sulfur from SO{sub 2}, potentially catalytic and conducting organometallics, actinide chemistry, and molecular thermodynamics for phase equilibria in mixtures. Under exploratory R and D funds, the following are discussed: technical evaluation of beamlines and experimental stations for chemical cynamics applications at the ALS synchrotron, and molecular beam threshold time-of-flight spectroscopy of rare gas atoms. Research on normal and superconducting properties of high-{Tc} systems is reported under work for others. (DLC)

  2. [Lawrence Berkeley Laboratory] Chemical Sciences Division annual report 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-09-01

    Summaries are given of research in the following fields: photochemistry of materials in stratosphere, energy transfer and structural studies of molecules on surfaces, laser sources and techniques, crossed molecular beams, molecular interactions, theory of atomic and molecular collision processes, selective photochemistry, photodissociation of free radicals, physical chemistry with emphasis on thermodynamic properties, chemical physics at high photon energies, high-energy atomic physics, atomic physics, high-energy oxidizers and delocalized-electron solids, catalytic hydrogenation of CO, transition metal-catalyzed conversion of CO, NO, H[sub 2], and organic molecules to fuels and petrochemicals, formation of oxyacids of sulfur from SO[sub 2], potentially catalytic and conducting organometallics, actinide chemistry, and molecular thermodynamics for phase equilibria in mixtures. Under exploratory R and D funds, the following are discussed: technical evaluation of beamlines and experimental stations for chemical cynamics applications at the ALS synchrotron, and molecular beam threshold time-of-flight spectroscopy of rare gas atoms. Research on normal and superconducting properties of high-[Tc] systems is reported under work for others. (DLC)

  3. Organization of the Optical Society of America Photonic Science Topical Meeting Series. Volume 14. Photorefractive Materials Effects, and Devices Held in Beverly, Massachusetts on 29-31 July 1991

    Science.gov (United States)

    1991-01-01

    Laboratories Peter Gunter Swiss Federal Institute of Technology, Switzerland Tom Pollak Sanders Associates Daniel Rytz Sandoz Optoelectronique , Switzerland...photorefractive quantum MJlA, NEW MATERIALS well structures, Q. N. Wang, D. D. Nolte, M. R. Melloch, Pur- Daniel Rytz, Sandoz Optoelectronique , Switzerland...are presented and discussed. (p. 432) xiv New Materials MA 8:30am-10:00am Academic Center Auditorium Daniel Rytz, Presider Sandoz Optoelectronique

  4. Bibliography of the technical literature of the Materials Joining Group, 1951--1991

    Energy Technology Data Exchange (ETDEWEB)

    David, S.A.; Goodwin, G.M.; Gardner, K. [comps.

    1991-12-01

    This document contains a listing of the written scientific information originating in the Materials Joining (formerly the Welding and Brazing Group), Metals and Ceramics Division, Oak Ridge National Laboratory during 1951 through June 1991. This registry of documents is as much as possible, in the order of issue date.

  5. Materials Science with Ion Beams

    CERN Document Server

    Bernas, Harry

    2010-01-01

    This book introduces materials scientists and designers, physicists and chemists to the properties of materials that can be modified by ion irradiation or implantation. These techniques can help design new materials or to test modified properties; novel applications already show that ion-beam techniques are complementary to others, yielding previously unattainable properties. Also, ion-beam interactions modify materials at the nanoscale, avoiding the often detrimental results of lithographic or chemical techniques. Here, the effects are related to better-known quasi-equilibrium thermodynamics, and the consequences to materials are discussed with concepts that are familiar to materials science. Examples addressed concern semiconductor physics, crystal and nanocluster growth, optics, magnetism, and applications to geology and biology.

  6. Status and Habitat Requirements of the White Sturgeon Populations in the Columbia River Downstream from McNary Dam, 1990-1991 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Nigro, Anthony A. (Oregon Department of Fish and Wildlife, Portland, OR)

    1991-09-01

    We report on our effort from April 1990 to March 1991 to describe the life history and population dynamics of white sturgeon Acipenser transmontanus in.John Day Reservoir. We set 1188 set lines and 26 gill nets. We caught 623 white sturgeon with set lines and 236 with gill nets. Catch per unit effort was much higher in areas near the tailrace than in downstream sites. Our setlines were size selective. We recaptured 3 fish released in John Day Reservoir in 1989 and 28 fish released in 1990. Sport and commercial fishermen recovered 62 tags from fish we tagged in Bonneville, The Dalles and John Day reservoirs, 1987-1990. We observed extensive movements of marked sturgeon within the reservoirs. We completed aging of available samples from all three reservoirs from 1987-1990. We aged fish as old as 46 years. Bone marks were observed on 74 of 78 fish previously injected with oxytetracycline and annulus formation was generally complete after June. We estimated parameters in a length-weight equation. About 1.5% of the female white sturgeon we examined to date had early or late vitellogenic eggs and would be expected to spawn the following year.

  7. Setting science free from materialism.

    Science.gov (United States)

    Sheldrake, Rupert

    2013-01-01

    Contemporary science is based on the claim that all reality is material or physical. There is no reality but material reality. Consciousness is a by-product of the physical activity of the brain. Matter is unconscious. Evolution is purposeless. This view is now undergoing a credibility crunch. The biggest problem of all for materialism is the existence of consciousness. Panpsychism provides a way forward. So does the recognition that minds are not confined to brains. Copyright © 2013 Elsevier Inc. All rights reserved.

  8. Phase change materials science and applications

    CERN Document Server

    Raoux, Simone

    2009-01-01

    ""Phase Change Materials: Science and Applications"" provides a unique introduction of this rapidly developing field. This clearly written volume describes the material science of these fascinating materials from a theoretical and experimental perspective.

  9. Department of the Navy FY 1990/FY 1991 Biennial Budget Estimates. Military Construction and Family Housing Program FY 1990. Justification Data Submitted to Congress

    Science.gov (United States)

    1989-01-01

    010 LP4OI6 131 NTLEHUSE PGlO 14 1. COMPONENT [2. DATE FY 1990 MILITARY CONSTRUCTION PROGRAM I NAVY 3. INSTALLATION AND LOCATION 4. COMMAND 5. AREA...PROPOSED CONSTRUCTION Expand electrical distribution system, cable, transformers , manholes; water distribution system, fire protection system, pump and...distribution system including substations, aerial, underground, and submarine feeders, oil switches, oil fuse cutouts, transformers , manholes

  10. Materials science experiments in space

    Science.gov (United States)

    Gelles, S. H.; Giessen, B. C.; Glicksman, M. E.; Margrave, J. L.; Markovitz, H.; Nowick, A. S.; Verhoeven, J. D.; Witt, A. F.

    1978-01-01

    The criteria for the selection of the experimental areas and individual experiments were that the experiment or area must make a meaningful contribution to the field of material science and that the space environment was either an absolute requirement for the successful execution of the experiment or that the experiment can be more economically or more conveniently performed in space. A number of experimental areas and individual experiments were recommended for further consideration as space experiments. Areas not considered to be fruitful and others needing additional analysis in order to determine their suitability for conduct in space are also listed. Recommendations were made concerning the manner in which these materials science experiments are carried out and the related studies that should be pursued.

  11. Ground based materials science experiments

    Science.gov (United States)

    Meyer, M. B.; Johnston, J. C.; Glasgow, T. K.

    1988-01-01

    The facilities at the Microgravity Materials Science Laboratory (MMSL) at the Lewis Research Center, created to offer immediate and low-cost access to ground-based testing facilities for industrial, academic, and government researchers, are described. The equipment in the MMSL falls into three categories: (1) devices which emulate some aspect of low gravitational forces, (2) specialized capabilities for 1-g development and refinement of microgravity experiments, and (3) functional duplicates of flight hardware. Equipment diagrams are included.

  12. Ground based materials science experiments

    Science.gov (United States)

    Meyer, M. B.; Johnston, J. C.; Glasgow, T. K.

    1988-01-01

    The facilities at the Microgravity Materials Science Laboratory (MMSL) at the Lewis Research Center, created to offer immediate and low-cost access to ground-based testing facilities for industrial, academic, and government researchers, are described. The equipment in the MMSL falls into three categories: (1) devices which emulate some aspect of low gravitational forces, (2) specialized capabilities for 1-g development and refinement of microgravity experiments, and (3) functional duplicates of flight hardware. Equipment diagrams are included.

  13. Office of Basic Energy Sciences 1990 summary report

    Energy Technology Data Exchange (ETDEWEB)

    1990-10-01

    Basic research is an important investment in the future which will help the US maintain and enhance its economic strength. The Office of Basic Energy Sciences (BES) basic research activities, carried out mainly in universities and Department of Energy (DOE) laboratories, are critical to the Nation's leadership in science, for training future scientists, and to fortify the Nation's foundations for social and economic well-being. Attainment of the national goals -- energy self-sufficiency, improved health and quality of life for all, economic growth, national security -- depends on both technological research achievements and the ability to exploit them rapidly. Basic research is a necessary element for technology development and economic growth. This report presents the Department of Energy's Office of Basic Energy Sciences program. The BES mission is to develop understanding and to stimulate innovative thinking needed to fortify the Department's missions.

  14. Expectations and beliefs in science communication: Learning from three European gene therapy discussions of the early 1990s.

    Science.gov (United States)

    Meyer, Gitte

    2016-04-01

    There is widespread agreement that the potential of gene therapy was oversold in the early 1990s. This study, however, comparing written material from the British, Danish and German gene therapy discourses of the period finds significant differences: Over-optimism was not equally strong everywhere; gene therapy was not universally hyped. Against that background, attention is directed towards another area of variation in the material: different basic assumptions about science and scientists. Exploring such culturally rooted assumptions and beliefs and their possible significance to science communication practices, it is argued that deep beliefs may constitute drivers of hype that are particularly difficult to deal with. To participants in science communication, the discouragement of hype, viewed as a practical-ethical challenge, can be seen as a learning exercise that includes critical attention to internalised beliefs.

  15. The Republic of Science in the 1990s

    NARCIS (Netherlands)

    Rip, Arie

    1994-01-01

    Research councils began as channels for state patronage of science (a widespread phenomenon after World War II) and were captured by the scientists: peer review of proposals, panels, board membership. In this way, they became an important organ of the lsquoRepublic of Sciencersquo (Michael Polanyi's

  16. Coal Combustion Science quarterly progress report, April--June 1990

    Energy Technology Data Exchange (ETDEWEB)

    Hardesty, D.R. (ed.); Baxter, L.L.; Fletcher, T.H.; Mitchell, R.E.

    1990-11-01

    This document provides a quarterly status report of the Coal Combustion Science Program that is being conducted at the Combustion, Research Facility, Sandia National Laboratories, Livermore, California. Coal devolatilization, coal char combustion, and fate of mineral matter during coal combustion. 56 refs., 25 figs., 13 tabs.

  17. Trends and Developments in Multi-Authorship in five Social Science disciplines from 1991 to 2014

    Energy Technology Data Exchange (ETDEWEB)

    Mayer, S.J

    2016-07-01

    This article explores developments in author numbers in five disciplines of the Social Sciences from 1991 to 2014, Economics, Educational Sciences, Political Science, Psychology, and Sociology. The relationship between the mean number of authors per article (in every discipline's five top journals) and three factors, publication year, international collaboration (IC), and article content (theoretical, experimental, or large-scale comparative) are analyzed. The findings show that single-authorship is decreasing and multi-authorship is on the rise, publication year was found to be significantly correlated with the number of authors. In addition, IC is positively correlated with the number of authors, even when publication year is controlled for. The content type “theoretical articles” is negatively related to the number of authors, even when publication year is controlled for. (Author)

  18. Annual Research Progress Report for Department of Clinical Investigation (Madigan Army Medical Center), October 1990 - September 1991

    Science.gov (United States)

    1991-09-01

    Study Objective: To determine the incidence of antiphospholipid antibodies in pregnancies complicated by intrauterine growth restriction (IUGR), to...Spontaneous Vaginal Delive2ry in Term Pregnancies Other nominees were: Richard A. Beck Cardiovascular Effects of Pseudoephedrine in MAd, MC Medically...Sex Hormone Matt DW, Steingold KA, Binding Globulin Levels in Obese Women with the Polycystic Plymate SR, Ovary Syndrome . JCEM 72(1): 83-89, 1991

  19. Structural dynamics division research and technology accomplishments for fiscal year 1990 and plans for fiscal year 1991

    Science.gov (United States)

    Wynne, Eleanor C.

    1991-01-01

    The research accomplishments of the Structural Dynamics Division for F.Y. 1991 are presented. The work is discussed in terms of highlights of accomplishments during the past year and plans for the current year as they relate to 5-year plans and the objectives of each technical area. Included is research on unsteady aerodynamics, helicopter rotors, computational fluid dynamics, oscillations of leading edge flaps of a delta wing, and aircraft wing loads.

  20. Research in mathematics and computer science at Argonne, September 1989--February 1991

    Energy Technology Data Exchange (ETDEWEB)

    Pieper, G.W.

    1991-03-01

    This report reviews the research activities in the Mathematics and Computer Science Division at Argonne National Laboratory for the period September 1989 through February 1991. The body of the report gives a brief look at the MCS staff and the research facilities and then discusses the diverse research projects carried out in the division. Projects funded by non-DOE sources are also discussed, and new technology transfer activities are described. Further information on staff, visitors, workshops, and seminars is found in the appendixes.

  1. Dialogs by Jerry Szymanski regarding the Yucca Mountain controversy from December, 1990 to March, 1991: Volume 2. Special report number 9, Contract number 92/94.0004

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-07-01

    This report is a compilation of materials used as part of the Penrose Conference of Bodega Bay, California and the NRC/NAS panel field trip (April 23--25, 1991). The document contains extensive graphs on the hydrologic and geologic systems of the Yucca Mountain region. It outlines and diagrams hydrologic issues relative to geothermal gradients, geochemical pathways, hydraulic gradients, ground water chemistry, and ground water flow models. Specific anomalies in regards to geology or hydrology are addressed as separate issues.

  2. HISD Magnet Evaluation: Science, Math, and Computer Enrichment Programs, 1990-91.

    Science.gov (United States)

    Kirkpatrick, Nanda D.; And Others

    Twenty-one magnet programs in the Houston Independent School District in Texas feature an enriched curriculum in science, math, and/or computers (science/math). Of these, 12 are elementary programs, 4 are middle school programs, and 5 are high school programs. In these programs, a total of 9,574 students were served during the 1990-91 school year:…

  3. Application of railgun principle to high-velocity hydrogen pellet injection for magnetic fusion reactor refueling. Technical progress report, [July 16, 1990--August 16, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Kim, K.

    1991-08-01

    This report contains three documents describing the progress made by the University of Illinois electromagnetic railgun program sponsored by the Office of Fusion Energy of the United States Department of Energy during the period from July 16, 1990 to August 16, 1991. The first document contains a brief summary of the tasks initiated, continued, or completed, the status of major tasks, and the research effort distribution, estimated and actual, during the period. The second document contains a description of the work performed on time resolved laser interferometric density measurement of the railgun plasma-arc armature. The third document is an account of research on the spectroscopic measurement of the electron density and temperature of the railgun plasma arc.

  4. Nanoscale tomography in materials science

    Directory of Open Access Journals (Sweden)

    Günter Möbus

    2007-12-01

    Full Text Available In materials science, various techniques for three-dimensional reconstruction of microstructures have been applied successfully for decades, such as X-ray tomography and mechanical sectioning. However, in the last decade the family tree of methods has grown significantly. This is partly through advances in instrumentation. The introduction of the focused ion beam microscope and the transformation of transmission electron microscopy into a multipurpose analytical and structural tool have made major impacts. The main driving force for progress is perhaps the advent of nanotechnology with the need to achieve nanometer-scale resolution and the desire to get a real three-dimensional view of the nanoscale world.

  5. Phospholipid Vesicles in Materials Science

    Energy Technology Data Exchange (ETDEWEB)

    Granick, Steve [Univ. of Illinois, Champaign, IL (United States)

    2016-05-11

    The objective of this research was to develop the science basis needed to deploy phospholipid vesicles as functional materials in energy contexts. Specifically, we sought to: (1) Develop an integrated molecular-level understanding of what determines their dynamical shape, spatial organization, and responsiveness to complex, time-varying environments; and (2) Develop understanding of their active transportation in crowded environments, which our preliminary measurements in cells suggest may hold design principles for targeting improved energy efficiency in new materials systems. The methods to do this largely involved fluorescence imaging and other spectroscopy involving single particles, vesicles, particles, DNA, and endosomes. An unexpected importance outcome was a new method to image light-emitting diodes during actual operation using super-resolution spectroscopy.

  6. University of Illinois at Urbana-Champaign, Materials Research Laboratory progress report for FY 1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    The Materials Research Laboratory at the University of Illinois is an interdisciplinary laboratory operated in the College of Engineering. Its focus is the science of materials and it supports research in the areas of condensed matter physics, solid state chemistry, and materials science. This report addresses topics such as: an MRL overview; budget; general programmatic and institutional issues; new programs; research summaries for metallurgy, ceramics, solid state physics, and materials chemistry.

  7. University of Illinois at Urbana-Champaign, Materials Research Laboratory progress report for FY 1991

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    The Materials Research Laboratory at the University of Illinois is an interdisciplinary laboratory operated in the College of Engineering. Its focus is the science of materials and it supports research in the areas of condensed matter physics, solid state chemistry, and materials science. This report addresses topics such as: an MRL overview; budget; general programmatic and institutional issues; new programs; research summaries for metallurgy, ceramics, solid state physics, and materials chemistry.

  8. Radioactive materials released from nuclear power plants. Volume 11: Annual report, 1990

    Energy Technology Data Exchange (ETDEWEB)

    Tichler, J.; Doty, K.; Congemi, J. [Brookhaven National Lab., Upton, NY (United States)

    1993-10-01

    Releases of radioactive materials in airborne and liquid effluents from commercial light water reactors during 1990 have been compiled and reported. Data on solid waste shipments as well as selected operating information have been included. This report supplements earlier annual reports issued by the former Atomic Energy Commission and the Nuclear Regulatory Commission. The 1990 release data are summarized in tabular form. Data covering specific radionuclides are summarized.

  9. ANL Technical Support Program for DOE Environmental Restoration and Waste Management. Annual report, October 1990--September 1991

    Energy Technology Data Exchange (ETDEWEB)

    Bates, J.K.; Bradley, C.R.; Buck, E.C.; Cunnane, J.C.; Dietz, N.L.; Ebert, W.L.; Emery, J.W.; Feng, X.; Gerding, T.J.; Gong, M.; Hoh, J.C.; Mazer, J.J.; Wronkiewicz, D.J. [Argonne National Lab., IL (United States); Bourcier, W.L.; Morgan, L.E.; Nielsen, J.K.; Steward, S.A. [Lawrence Livermore National Lab., CA (United States); Ewing, R.C.; Wang, L.M. [New Mexico Univ., Albuquerque, NM (United States); Han, W.T.; Tomozawa, M. [Rensselaer Polytechnic Inst., Troy, MI (United States)

    1992-03-01

    This report provides an overview of progress during FY 1991 for the Technical Support Program that is part of the ANL Technology Support Activity for DOE, Environmental Restoration and Waste Management (EM). The purpose is to evaluate, before hot start-up of the Defenses Waste Processing Facility (DWPF) and the West Valley Demonstration Project (WVDP), factors that are likely to affect glass reaction in an unsaturated environment typical of what may be expected for the candidate Yucca Mountain repository site. Specific goals for the testing program include the following: (1) to review and evaluate available information on parameters that will be important in establishing the long-term performance of glass in a repository environment; (2) to perform testing to further quantify the effects of important variables where there are deficiencies in the available data; and (3) to initiate long-term testing that will bound glass performance under a range of conditions applicable to repository disposal.

  10. Compilation of reports from research supported by the Materials Engineering Branch, Division of Engineering: 1991--1993. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Hiser, A.L. [comp.

    1994-06-01

    Since 1965, the Materials Engineering Branch, Division of Engineering, of the Nuclear Regulatory Commission`s Office of Nuclear Regulatory Research, and its predecessors dating back to the Atomic Energy Commission (AEC), has sponsored research programs concerning the integrity of the primary system pressure boundary of light water reactors. The components of concern in these research programs have included the reactor pressure vessel (RPV), steam generators, and the piping. These research programs have covered a broad range of topics, including fracture mechanics analysis and experimental work for RPV and piping applications, inspection method development and qualification, and evaluation of irradiation effects to RPV steels. This report provides as complete a listing as practical of formal technical reports submitted to the NRC by the investigators working on these research programs. This listing includes topical, final and progress reports, and is segmented by topic area. In many cases a report will cover several topics (such as in the case of progress reports of multi-faceted programs), but is listed under only one topic. Therefore, in searching for reports on a specific topic, other related topic areas should be checked also. The separate volumes of this report cover the following periods: Volume 1: 1965--1990 and Volume 2: 1991--1993.

  11. Materials sciences programs, Fiscal year 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-01

    The Division of Materials Sciences is responsible for basic research and research facilities in materials science topics important to the mission of the Department of Energy. The programmatic divisions under the Office of Basic Energy Sciences are Chemical Sciences, Engineering and Geosciences, and Energy Biosciences. Materials Science is an enabling technology. The performance parameters, economics, environmental acceptability and safety of all energy generation, conversion, transmission and conservation technologies are limited by the properties and behavior of materials. The Materials Sciences programs develop scientific understanding of the synergistic relationship among synthesis, processing, structure, properties, behavior, performance and other characteristics of materials. Emphasis is placed on the development of the capability to discover technologically, economically, and environmentally desirable new materials and processes, and the instruments and national user facilities necessary for achieving such progress. Materials Sciences subfields include: physical metallurgy, ceramics, polymers, solid state and condensed matter physics, materials chemistry, surface science and related disciplines where the emphasis is on the science of materials. This report includes program descriptions for 517 research programs including 255 at 14 DOE National Laboratories, 262 research grants (233 of which are at universities), and 29 Small Business Innovation Research Grants. Five cross-cutting indices located at the rear of this book identify all 517 programs according to principal investigator(s), materials, techniques, phenomena, and environment.

  12. High energy physics program at Texas A&M University. Final report, April 1, 1990--March 31, 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-01

    The Texas A&M experimental high energy physics program has been supported since its inception by DOE Contract DE-AS05-81ER40039. During that period we established a viable experimental program at a university which before this time had no program in high energy physics. In 1990, the experimental program was augmented with a program in particle theory. In the accompanying final report, we outline the research work accomplished during the final year of this contract and the program being proposed for consideration by the Department of Energy for future grant support. Some of the particular areas covered are: Collider detector at Fermilab program; the TAMU MACRO program; SSC R&D program; SSC experimental program; and theoretical physics program.

  13. Life Sciences Division and Center for Human Genome Studies. Annual report, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Spitzmiller, D.; Bradbury, M.; Cram, S. [comps.

    1992-05-01

    This report summarizes the research and development activities of Los Alamos National Laboratories Life Sciences Division and biological aspects of the Center for Human Genome Studies for the calendar year 1991. Selected research highlights include: yeast artificial chromosome libraries from flow sorted human chromosomes 16 and 21; distances between the antigen binding sites of three murine antibody subclasses measured using neutron and x-ray scattering; NFCR 10th anniversary highlights; kinase-mediated differences found in the cell cycle regulation of normal and transformed cells; and detecting mutations that cause Gaucher`s disease by denaturing gradient gel electrophoresis. Project descriptions include: genomic structure and regulation, molecular structure, cytometry, cell growth and differentiation, radiation biology and carcinogenesis, and pulmonary biology.

  14. Separations Science and Technology, Semiannual progress report, October 1991--March 1992

    Energy Technology Data Exchange (ETDEWEB)

    Vandegrift, G.F.; Betts, S.; Chamberlain, D.B. [and others

    1994-01-01

    This document reports on the work done by the Separations Science and Technology Programs of the Chemical Technology Division, Argonne National Laboratory, in the period October 1991--March 1992. This effort is mainly concerned with developing the TRUEX process for removing and concentrating actinides from acidic waste streams contaminated with transuranic (TRU) elements. The objectives of TRUEX processing are to recover valuable TRU elements and to lower disposal costs for the nonTRU waste product of the process. Two other projects are underway with the objective of developing (1) a membrane-assisted solvent extraction method for treating natural and process waters contaminated by volatile organic compounds and (2) evaporation technology for concentrating radioactive waste and product streams such as those generated by the TRUEX process.

  15. LBL/JSU/AGMUS science consortium annual report, FY 1991--1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-31

    In 1983, a formal Memorandum of Understanding joined the Ana G. Mendez University System (AGMUS), Jackson State University (JSU), and the Lawrence Berkeley Laboratory (LBL) in a consortium designed to advance the science and technology programs of JSU and AGMUS. This is the first such collaboration between a Hispanic university system, a historically Black university, and a national laboratory. The goals of this alliance are basic and direct: to develop and effect a long-term, comprehensive program that will enable the campuses of AGMUS and JSU to provide a broad, high-quality offering in the natural and computer sciences, to increase the number of minority students entering these fields, and to contribute to scientific knowledge and the federal government`s science mission through research. This report documents the progress toward these goals and includes individual success stories. The LBL/JSU/AGMUS Science Consortium has developed plans for utilizing its program successes to help other institutions to adopt or adapt those elements of the model that have produced the greatest results. Within the five-year plan formulated in 1990 are eight major components, each with defining elements and goals. These elements have become the components of the Science Consortium`s current plan for expansion and propagation.

  16. JPRS Report, Science & Technology, USSR: Materials Science.

    Science.gov (United States)

    1988-04-04

    Producing Kovar-To-Glass Seals by Heating With Light From Xenon^Arc Lamps CM. 1, Oparin , V. B. Redchits; SVAROCHNOYE PROIZVODSTVO, No 11, Nov 87) 28...10-11 iArticle by M, I, Oparin , candidate of technical sciences, and V, B. Redchits, engineer] [Abstract] Hermetic Kovar-to-glass seals were

  17. JPRS Report, Science & Technology, USSR: Materials Science

    Science.gov (United States)

    1988-03-15

    of Smelting 12Crl2NiCu Cast Steel for Water-Turbine Blades (I.A. Kuntsevich , V.V. Kobzistyy et al.; LITEYNOYE PROIZVODSTVO, No 4, Apr 87) Alloying...Moscow LITEYNOYE PROIZVODSTVO in Russian No 4, Apr 87 pp 9-10 [Article by I.A. Kuntsevich , candidate of technical sciences, V.V. Kobzistyy, engineer

  18. Inertial Confinement Fusion Materials Science

    Energy Technology Data Exchange (ETDEWEB)

    Hamza, A V

    2004-06-01

    Demonstration of thermonuclear ignition and gain on a laboratory scale is one of science's grand challenges. The National Ignition Facility (NIF) is committed to achieving inertial confinement fusion (ICF) by 2010. Success in this endeavor depends on four elements: the laser driver performance, target design, experimental diagnostics performance, and target fabrication and target materials performance. This article discusses the current state of target fabrication and target materials performance. The first three elements will only be discussed insofar as they relate to target fabrication specifications and target materials performance. Excellent reviews of the physics of ICF are given by Lindl [Lindl 1998] and Lindl et al. [Lindl 2004]. To achieve conditions under which inertial confinement is sufficient to achieve thermonuclear burn, an imploded fuel capsule is compressed to conditions of high density and temperature. In the laboratory a driver is required to impart energy to the capsule to effect an implosion. There are three drivers currently being considered for ICF in the laboratory: high-powered lasers, accelerated heavy ions, and x rays resulting from pulsed power machines. Of these, high-powered lasers are the most developed, provide the most symmetric drive, and provide the most energy. Laser drive operates in two configurations. The first is direct drive where the laser energy impinges directly on the ICF capsule and drives the implosion. The second is indirect drive, where the energy from the laser is first absorbed in a high-Z enclosure or hohlraum surrounding the capsule, and the resulting x-rays emitted by the hohlraum material drives the implosion. Using direct drive the laser beam energy is absorbed by the electrons in the outer corona of the target. The electrons transport the energy to the denser shell region to provide the ablation and the resulting implosion. Laser direct drive is generally less efficient and more hydrodynamically unstable

  19. JPRS Report, Science & Technology, USSR: Materials Science.

    Science.gov (United States)

    2007-11-02

    Semiconductor Physics Institute, Siberian Department, USSR Academy of Sciences] [Abstract] An experimental study was made concerning use of binary Bi...begun at the "round table". We are waiting for letters with your opinions and suggestions which, we hope, will help accelerate the solution of the...received 23 Jun 86) pp 516-520 [Article "by B. I. Kosilo, L. I. Polezhayeva, L. P. Polyakova, Ye. G. Polyakov and A. B. Smirnov, Institute of the

  20. JPRS Report, Science & Technology, USSR: Materials Science

    Science.gov (United States)

    1988-01-11

    material possess special heat-stability. The optical characteristics of metals usually used as selective solar cell absorbers (high absorbability in the...single-phase crystalline (spinel- perovskite -, garnet-like materials), as well as composite. Electrical, mechanical, optical, magnetic, and biological...Dielectrics Ferroelectries Piezoelectrics Semiconductors Electron-ion semiconductors Ion conductors AI2O3, BeO BaTi03, SrTi03 Pb (Ti, Zr)Oß

  1. Minutes of the Tank Waste Science Panel meeting July 9--1, 1991. Hanford Tank Safety Project

    Energy Technology Data Exchange (ETDEWEB)

    Strachan, D.M. [comp.

    1992-04-01

    The fifth meeting of the Tank Waste Science Panel was held July 9--11, 1991, in Atlanta, Georgia. The subject areas included the generation, retention, and release of gases from Tank 241-SY-101 and the chemistry of ferrocyanide wastes.

  2. Minutes of the Tank Waste Science Panel meeting, November 11--13, 1991. Hanford Tank Safety Project

    Energy Technology Data Exchange (ETDEWEB)

    Strachan, D.M. [comp.

    1992-04-01

    The sixth meeting of the Tank Waste Science Panel was held November 11--13, 1991, in Pasco and Richland, Washington. Participating scientists presented the results of recent work on various aspects of issues relating to the generation and release of gases from Tank 241-SY-101 and the presence of ferrocyanide in other tanks at Hanford. Results are discussed.

  3. Middle school integrated science, mathematics and technology curriculum. Final report, September 30, 1991--December 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Brecher, K.

    1994-03-01

    The Project ``Middle School Integrated Science, Mathematics and Technology Curriculum`` had two goals: (1) to survey the literature of energy education; and (2) to develop a theme for a possible integrated middle school energy based curriculum. We aimed to respond to the challenge of developing thematic integrated curricula as advocated by the NSTA, AAAS and other organizations analyzing the future of American science and mathematics education. The survey of middle school energy curriculum materials has been completed. A list of the resources surveyed are included in this report. Though many energy based curriculum materials have been produced, none of them appears to be broadly disseminated throughout the country. Some energy based curriculum materials are far less well developed than others. We found that an integrated set of modular materials concerning the energy based theme of light and optics does not now exist. If they were developed, they could be broadly disseminated throughout middle school courses in the physical and biological sciences, as well as in new integrated science courses proposed as part of the current science education reform movement. These types of modular materials could also provide a powerful means of student exploration of new technologies such as microcomputers.

  4. Herbicides and their metabolites in rainfall: Origin, transport, and deposition patterns across the midwestern and northeastern United States, 1990-1991

    Science.gov (United States)

    Goolsby, D.A.; Thurman, E.M.; Pomes, M.L.; Meyer, M.T.; Battaglin, W.A.

    1997-01-01

    Herbicides were detected in rainfall throughout the midwestern and northeastern United States during late spring and summer of 1990 and 1991. Herbicide concentrations exhibited distinct geographic and seasonal patterns. The highest concentrations occurred in midwestern cornbelt states following herbicide application to cropland. Volume-weighted concentrations of 0.2- 0.4??g/L for atrazine and alachlor were typical in this area during mid- April through mid-July, and weighted concentrations as large as 0.6-0.9 ??g/L occurred at several sites. Concentrations of 1-3 ??g/L were measured in a few individual samples. Atrazine was detected most often followed by alachlor, deethylatrazine, metolachlor, cyanazine, and deisopropyl-atrazine. The high ratio (~0.5) of deethylatrazine to atrazine in rainfall suggests atmospheric degradation of atrazine. Mass deposition of herbicides was greatest in areas where herbicide use was high and decreased with distance from the cornbelt. Estimated deposition rates for both atrazine and alachlor ranged from more than 240 ??g m-2 yr-1 for some areas in the midwestern states to less than 10 ??g m-2 yr-1 for the New England states. The estimated annual deposition of atrazine on the Great Lakes ranged from about 12 to 63 ??g m-2 yr-1. The total amounts of atrazine and alachlor deposited annually in rainfall in the study area represent about 0.6% of the atrazine and 0.4% of the alachlor applied annually to crops in the study area.

  5. [History of pedagogy and educational sciences in the Baltic countries from 1940 to 1990. An overview] / Mare Oja

    Index Scriptorium Estoniae

    Oja, Mare, 1960-

    2014-01-01

    Arvustus: History of pedagogy and educational sciences in the Baltic countries from 1940 to 1990. An overview. Hrsg. im Auftrag der Baltic Association of Historians of Pedagogy von Vadim Rõuk und Vidimantas Raudys. Verlag RaKa. Riga 2013

  6. [History of pedagogy and educational sciences in the Baltic countries from 1940 to 1990. An overview] / Mare Oja

    Index Scriptorium Estoniae

    Oja, Mare, 1960-

    2014-01-01

    Arvustus: History of pedagogy and educational sciences in the Baltic countries from 1940 to 1990. An overview. Hrsg. im Auftrag der Baltic Association of Historians of Pedagogy von Vadim Rõuk und Vidimantas Raudys. Verlag RaKa. Riga 2013

  7. Materials sciences programs: Fiscal year 1994

    Science.gov (United States)

    1995-04-01

    The Division of Materials Sciences is located within the DOE in the Office of Basic Energy Sciences. The Division of Materials Sciences is responsible for basic research and research facilities in strategic materials science topics of critical importance to the mission of the Department and its Strategic Plan. Materials Science is an enabling technology. The performance parameters, economics, environmental acceptability and safety of all energy generation, conversion, transmission and conservation technologies are limited by the properties and behavior of materials. The Materials Sciences programs develop scientific understanding of the synergistic relationship amongst the synthesis, processing, structure, properties, behavior, performance and other characteristics of materials. Emphasis is placed on the development of the capability to discover technologically, economically, and environmentally desirable new materials and processes, and the instruments and national user facilities necessary for achieving such progress. Materials Sciences sub-fields include physical metallurgy, ceramics, polymers, solid state and condensed matter physics, materials chemistry, surface science and related disciplines where the emphasis is on the science of materials. This report includes program descriptions for 458 research programs including 216 at 14 DOE National Laboratories, 242 research grants (233 for universities), and 9 Small Business Innovation Research (SBIR) Grants. The report is divided into eight sections. Section A contains all Laboratory projects, Section B has all contract research projects, Section C has projects funded under the SBIR Program, Section D describes the Center of Excellence for the Synthesis and Processing of Advanced Materials and E has information on major user facilities. F contains descriptions of other user facilities; G, a summary of funding levels; and H, indices characterizing research projects.

  8. Materials sciences programs, fiscal year 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    The Division of Materials Sciences is located within the DOE in the Office of Basic Energy Sciences. The Division of Materials Sciences is responsible for basic research and research facilities in strategic materials science topics of critical importance to the mission of the Department and its Strategic Plan. Materials Science is an enabling technology. The performance parameters, economics, environmental acceptability and safety of all energy generation, conversion, transmission and conservation technologies are limited by the properties and behavior of materials. The Materials Sciences programs develop scientific understanding of the synergistic relationship amongst the synthesis, processing, structure, properties, behavior, performance and other characteristics of materials. Emphasis is placed on the development of the capability to discover technologically, economically, and environmentally desirable new materials and processes, and the instruments and national user facilities necessary for achieving such progress. Materials Sciences sub-fields include physical metallurgy, ceramics, polymers, solid state and condensed matter physics, materials chemistry, surface science and related disciplines where the emphasis is on the science of materials. This report includes program descriptions for 458 research programs including 216 at 14 DOE National Laboratories, 242 research grants (233 for universities), and 9 Small Business Innovation Research (SBIR) Grants. The report is divided into eight sections. Section A contains all Laboratory projects, Section B has all contract research projects, Section C has projects funded under the SBIR Program, Section D describes the Center of Excellence for the Synthesis and Processing of Advanced Materials and E has information on major user facilities. F contains descriptions of other user facilities; G, a summary of funding levels; and H, indices characterizing research projects.

  9. JPRS Report, Science & Technology, USSR: Materials Science

    Science.gov (United States)

    2007-11-02

    structural materials and the formation of macroscopic and microscopic over- growth on them. Specimens measuring 100x50x2 mm were attached by PVC ...composition, in percent: 0.10 C; 0.39 Mn; 0.019 S; 0.020 P. A boron-containing slag-forming mixture was placed in the mold before pouring of one of the...steel making system consisting of oxygen converters, steel-pouring ladles, installations for blowing argon through the steel and continuous casting

  10. Photovoltaic Subcontract Program, FY 1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    This report summarizes the fiscal year (FY) 1991 (October 1, 1990, through September 30, 1991) progress of the subcontracted photovoltaic (PV) research and development (R D) performed under the Photovoltaic Advanced Research and Development Project at the National Renewable Energy Laboratory (NREL) -- formerly the Solar Energy Research Institute (SERI). The mission of the national PV program is to develop PV technology for large-scale generation of economically competitive electric power in the United States. The technical sections of the report cover the main areas of the subcontract program: the Amorphous Silicon Research Project, Polycrystalline Thin Films, Crystalline Silicon Materials Research, High-Efficiency Concepts, the New Ideas Program, the University Participation Program, and the Photovoltaic Manufacturing Technology (PVMaT) project. Technical summaries of each of the subcontracted programs provide a discussion of approaches, major accomplishments in FY 1991, and future research directions.

  11. Perspectives on Materials Science in 3D

    DEFF Research Database (Denmark)

    Juul Jensen, Dorte

    2016-01-01

    Materials characterization in 3D has opened a new era in materials science, which is discussed in this paper. The original motivations and visions behind the development of one of the new 3D techniques, namely the three dimensional x-ray diffraction (3DXRD) method, are presented and the route...... to its implementation is described. The present status of materials science in 3D is illustrated by examples related to recrystallization. Finally, challenges and suggestions for the future success for 3D Materials Science relating to hardware evolution, data analysis, data exchange and modeling...

  12. The Science of Smart Materials

    Science.gov (United States)

    Boohan, Richard

    2011-01-01

    Over the last few decades, smart materials have become increasingly important in the design of products. Essentially, a smart material is one that has been designed to respond to a stimulus, such as a change in temperature or magnetic field, in a particular and useful way. This article looks at a range of smart materials that are relatively…

  13. JPRS report: Science and technology. Central Eurasia: Materials science

    Science.gov (United States)

    1992-03-01

    A bibliography is given of Central Eurasian research in materials science. Topics covered include analysis and testing; corrosion resistance; ferrous metals; nonferrous alloys, brazes, and solders; heat treatment; welding, brazing, and soldering; and extractive metallurgy.

  14. Materials science for nuclear detection

    Directory of Open Access Journals (Sweden)

    Anthony Peurrung

    2008-03-01

    Full Text Available The increasing importance of nuclear detection technology has led to a variety of research efforts that seek to accelerate the discovery and development of useful new radiation detection materials. These efforts aim to improve our understanding of how these materials perform, develop formalized discovery tools, and enable rapid and effective performance characterization. We provide an overview of these efforts along with an introduction to the history, physics, and taxonomy of radiation detection materials.

  15. Pacific Northwest Laboratory annual report for 1991 to the DOE Office of Energy Research. Part 1, Biomedical sciences

    Energy Technology Data Exchange (ETDEWEB)

    Park, J.F.

    1992-09-01

    This report summarizes progress in OHER biological research and general life sciences research programs conducted conducted at PNL in FLY 1991. The research develops the knowledge and scientific principles necessary to identify, understand, and anticipate the long- term health consequences of energy-related radiation and chemicals. Our continuing emphasis is to decrease the uncertainty of health risk estimates from existing and newly developed energy-related technologies through an increased understanding of the ways in which radiation and chemicals cause biological damage.

  16. Recent progress in hybrid materials science.

    Science.gov (United States)

    Sanchez, Clément; Shea, Kenneth J; Kitagawa, Susumu

    2011-02-01

    This themed issue of Chemical Society Reviews reviews recent progress made in hybrid materials science. Guest editors Clément Sanchez, Susumu Kitagawa and Ken Shea introduce the issue and the academic and industrial importance of the field.

  17. Overview of HVEM Investigations in Materials Science

    Directory of Open Access Journals (Sweden)

    Hirotaro Mori

    2011-12-01

    Full Text Available High-voltage electron microscopy possesses a number of advantages that cannot be afforded by conventional electron microscopy. Topics in recent investigations with HVEMs in materials science are reviewed.

  18. Computational materials science: Nanoscale plasticity

    DEFF Research Database (Denmark)

    Jacobsen, Karsten Wedel; Schiøtz, Jakob

    2002-01-01

    How does plastic deformation of polycrystalline materials with grain sizes less than 100 nm look at the atomic scale? A large-scale molecular dynamics simulation of nanocrystalline alluminium reveals some surprising behaviour.......How does plastic deformation of polycrystalline materials with grain sizes less than 100 nm look at the atomic scale? A large-scale molecular dynamics simulation of nanocrystalline alluminium reveals some surprising behaviour....

  19. Microgravity Materials Science Conference 2000. Volume 3

    Science.gov (United States)

    Ramachandran, Narayanan; Bennett, Nancy; McCauley, Dannah; Murphy, Karen; Poindexter, Samantha

    2001-01-01

    This is Volume 3 of 3 of the 2000 Microgravity Materials Science Conference that was held June 6-8 at the Von Braun Center, Huntsville, Alabama. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division (MRD) at NASA Headquarters, and hosted by NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the fourth NASA conference of this type in the Microgravity materials science discipline. The microgravity science program sponsored 200 investigators, all of whom made oral or poster presentations at this conference- In addition, posters and exhibits covering NASA microgravity facilities, advanced technology development projects sponsored by the NASA Microgravity Research Division at NASA Headquarters, and commercial interests were exhibited. The purpose of the conference was to inform the materials science community of research opportunities in reduced gravity and to highlight the Spring 2001 release of the NASA Research Announcement (NRA) to solicit proposals for future investigations. It also served to review the current research and activities in material,, science, to discuss the envisioned long-term goals. and to highlight new crosscutting research areas of particular interest to MRD. The conference was aimed at materials science researchers from academia, industry, and government. A workshop on in situ resource utilization (ISRU) was held in conjunction with the conference with the goal of evaluating and prioritizing processing issues in Lunar and Martian type environments. The workshop participation included invited speakers and investigators currently funded in the material science program under the Human Exploration and Development of Space (HEDS) initiative. The conference featured a plenary session every day with an invited speaker that was followed by three parallel breakout sessions in subdisciplines. Attendance was close

  20. Microgravity Materials Science Conference 2000. Volume 2

    Science.gov (United States)

    Ramachandran, Narayanan (Editor); Bennett, Nancy (Editor); McCauley, Dannah (Editor); Murphy, Karen (Editor); Poindexter, Samantha (Editor)

    2001-01-01

    This is Volume 2 of 3 of the 2000 Microgravity Materials Science Conference that was held June 6-8 at the Von Braun Center, Huntsville, Alabama. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division (MRD) at NASA Headquarters, and hosted by NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the fourth NASA conference of this type in the Microgravity materials science discipline. The microgravity science program sponsored approx. 200 investigators, all of whom made oral or poster presentations at this conference- In addition, posters and exhibits covering NASA microgravity facilities, advanced technology development projects sponsored by the NASA Microgravity Research Division at NASA Headquarters, and commercial interests were exhibited. The purpose of the conference %%,its to inform the materials science community of research opportunities in reduced gravity and to highlight the Spring 2001 release of the NASA Research Announcement (NRA) to solicit proposals for future investigations. It also served to review the current research and activities in material,, science, to discuss the envisioned long-term goals. and to highlight new crosscutting research areas of particular interest to MRD. The conference was aimed at materials science researchers from academia, industry, and government. A workshop on in situ resource utilization (ISRU) was held in conjunction with the conference with the goal of evaluating and prioritizing processing issues in Lunar and Martian type environments. The workshop participation included invited speakers and investigators currently funded in the material science program under the Human Exploration and Development of Space (HEDS) initiative. The conference featured a plenary session every day with an invited speaker that was followed by three parallel breakout sessions in subdisciplines. Attendance

  1. Microgravity Materials Science Conference 2000. Volume 1

    Science.gov (United States)

    Ramachandran, Narayanan (Editor); Bennett, Nancy (Editor); McCauley, Dannah (Editor); Murphy, Karen (Editor); Poindexter, Samantha (Editor)

    2001-01-01

    This is Volume 1 of 3 of the 2000 Microgravity Material Science Conference that was held June 6-8 at the Von Braun Center, Huntsville, Alabama. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division (MRD) at NASA Headquarters, and hosted by NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the fourth NASA conference of this type in the microgravity materials science discipline. The microgravity science program sponsored approx. 200 investigators, all of whom made oral or poster presentations at this conference. In addition, posters and exhibits covering NASA microgravity facilities, advanced technology development projects sponsored by the NASA Microgravity Research Division at NASA Headquarters, and commercial interests were exhibited. The purpose of the conference was to inform the materials science community of research opportunities in reduced gravity and to highlight the Spring 2001 release of the NASA Research Announcement (NRA) to solicit proposals for future investigations. It also served to review the current research and activities in materials science, to discuss the envisioned long-term goals. and to highlight new crosscutting research areas of particular interest to MRD. The conference was aimed at materials science researchers from academia, industry, and government. A workshop on in situ resource utilization (ISRU) was held in conjunction with the conference with the goal of evaluating and prioritizing processing issues in Lunar and Martian type environments. The workshop participation included invited speakers and investigators currently funded in the material science program under the Human Exploration and Development of Space (HEDS) initiative. The conference featured a plenary session every day with an invited speaker that was followed by three parallel breakout sessions in subdisciplines. Attendance was

  2. AGS Experiments: 1989, 1990, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Depken, J.C.

    1992-02-01

    This report contains: Experimental areas layout; table of beam parameters and fluxes; experiment schedule ``as run``; proposed 1992 schedule; a listing of experiments by number; two-page summaries of each experiment begin here, also ordered by number; publications of AGS Experiments begin here; and list of AGS Experimenters begins here.

  3. AGS Experiments: 1989, 1990, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Depken, J.C.

    1992-02-01

    This report contains: Experimental areas layout; table of beam parameters and fluxes; experiment schedule as run''; proposed 1992 schedule; a listing of experiments by number; two-page summaries of each experiment begin here, also ordered by number; publications of AGS Experiments begin here; and list of AGS Experimenters begins here.

  4. New activities and changing roles of health sciences librarians: a systematic review, 1990-2012.

    Science.gov (United States)

    Cooper, I Diane; Crum, Janet A

    2013-10-01

    The paper identifies and documents new health sciences librarian activities and roles during the period from 1990-2012. A systematic review of the literature was conducted using MEDLINE, Library and Information Abstracts, Library Literature, Scopus, and Web of Science. To find new roles that might not yet have been described in the literature, job announcements published in the Medical Library Association email discussion list archives from 2008-2012 were searched. For inclusion, an article needed to contain a substantive description of a new role and/or activity performed by librarians and be in the field of medical or health sciences librarianship. Papers that did not describe an actual (rather than proposed) librarian role were excluded. NEW ROLES IDENTIFIED THROUGH THE LITERATURE SEARCH WERE: embedded librarians (such as clinical informationist, bioinformationist, public health informationist, disaster information specialist); systematic review librarian; emerging technologies librarian; continuing medical education librarian; grants development librarian; and data management librarian. New roles identified through job announcements were digital librarian, metadata librarian, scholarly communication librarian, and translational research librarian. New twists to old roles were also identified: clinical medical librarian, instruction librarian, outreach librarian, and consumer health librarian. While the main purposes of health sciences librarianship remain the same, the new roles represent major new activities so that, for many librarians, daily on-the-job work is completely different. This list of new activities should inform students contemplating medical librarianship careers, guide formal and continuing education programs, and encourage other librarians to consider these new services.

  5. BUILDING MATERIAL SUPPORT FOR TEACHING OF MATERIALS SCIENCE

    Directory of Open Access Journals (Sweden)

    Jesús García-Lira

    2015-07-01

    Full Text Available The present work shows a number of materials that have processor is presented to facilitate and enhance the learning process of the subject of materials science by students who are studying mechanical engineering, with the always present possibility of use in other common or related field. These materials can be accessible to students in the virtual field, as new more active and participatory teaching methodologies focused on learning are presented.

  6. Carbon Nanotubes: Miracle of Materials Science?

    Science.gov (United States)

    Files, Bradley S.; Mayeaux, Brian M.

    1999-01-01

    Article to be sent to Advanced Materials and Processes, journal of ASM International, as attached. This is a news-type technical journal for a large organization of scientists, engineers, salesmen, and managers. The article is quite general, meant to be an introduction to the properties of nanotubes. This is a materials science organization, therefore the article is geared toward using nanotubes for materials uses. Pictures have not been included in this version.

  7. Overview of NASA's Microgravity Materials Science Program

    Science.gov (United States)

    Downey, James Patton

    2012-01-01

    The microgravity materials program was nearly eliminated in the middle of the aughts due to budget constraints. Hardware developments were eliminated. Some investigators with experiments that could be performed using ISS partner hardware received continued funding. Partnerships were established between US investigators and ESA science teams for several investigations. ESA conducted peer reviews on the proposals of various science teams as part of an ESA AO process. Assuming he or she was part of a science team that was selected by the ESA process, a US investigator would submit a proposal to NASA for grant funding to support their part of the science team effort. In a similar manner, a US materials investigator (Dr. Rohit Trivedi) is working as a part of a CNES selected science team. As funding began to increase another seven materials investigators were selected in 2010 through an NRA mechanism to perform research related to development of Materials Science Research Rack investigations. One of these has since been converted to a Glovebox investigation.

  8. Materials Science and Technology Teachers Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Wieda, Karen J.; Schweiger, Michael J.; Bliss, Mary; Pitman, Stan G.; Eschbach, Eugene A.

    2008-09-04

    The Materials Science and Technology (MST) Handbook was developed by Pacific Northwest National Laboratory, in Richland, Washington, under support from the U.S. Department of Energy. Many individuals have been involved in writing and reviewing materials for this project since it began at Richland High School in 1986, including contributions from educators at the Northwest Regional Education Laboratory, Central Washington University, the University of Washington, teachers from Northwest Schools, and science and education personnel at Pacific Northwest National Laboratory. Support for its development was also provided by the U.S. Department of Education. This introductory course combines the academic disciplines of chemistry, physics, and engineering to create a materials science and technology curriculum. The course covers the fundamentals of ceramics, glass, metals, polymers and composites. Designed to appeal to a broad range of students, the course combines hands-on activities, demonstrations and long term student project descriptions. The basic philosophy of the course is for students to observe, experiment, record, question, seek additional information, and, through creative and insightful thinking, solve problems related to materials science and technology. The MST Teacher Handbook contains a course description, philosophy, student learning objectives, and instructional approach and processes. Science and technology teachers can collaborate to build the course from their own interests, strengths, and experience while incorporating existing school and community resources. The course is intended to meet local educational requirements for technology, vocational and science education.

  9. Displaying Science: The Exhibits Revolution in Science and Natural History Museums, 1900--1990

    Science.gov (United States)

    Rader, Karen

    2014-03-01

    Once defined primarily by their collections, by the end of the twentieth century, American natural history and science museums had become institutions defined largely by their displays. This talk will use life science and physics exhibits to illustrate how and why this transformation occurred. Efforts to modernize displays shaped and were themselves shaped by new institutional roles and identities for museums in twentieth-century science education and in American culture. Drawing on a forthcoming co-authored book (``Life on Display,'' U. Chicago, 2014) this talk will reveal the controversies that accompanied exhibition building, chronicling how and why curators, designers, and educators worked with and against one another to build displays intended to communicate new ideas about topics like evolution, animal behavior, and radiation to the American public. It explains that scientists were extraordinarily invested in the success of museums' displays and saw display as an integral element of their own public outreach work and research agendas. In turn, rapidly professionalizing exhibit designers were periodic participants in the research process, supplementing and sometimes prompting research projects through the displays they built. Presenting work that is co-authored by Rader and Victoria E.M. Cain (Northeastern University).

  10. Trends in health sciences library and information science research: an analysis of research publications in the Bulletin of the Medical Library Association and Journal of the Medical Library Association from 1991 to 2007*

    Science.gov (United States)

    Gore, Sally A.; Nordberg, Judith M.; Palmer, Lisa A.

    2009-01-01

    Objective: This study analyzed trends in research activity as represented in the published research in the leading peer-reviewed professional journal for health sciences librarianship. Methodology: Research articles were identified from the Bulletin of the Medical Library Association and Journal of the Medical Library Association (1991–2007). Using content analysis and bibliometric techniques, data were collected for each article on the (1) subject, (2) research method, (3) analytical technique used, (4) number of authors, (5) number of citations, (6) first author affiliation, and (7) funding source. The results were compared to a previous study, covering the period 1966 to 1990, to identify changes over time. Results: Of the 930 articles examined, 474 (51%) were identified as research articles. Survey (n = 174, 37.1%) was the most common methodology employed, quantitative descriptive statistics (n = 298, 63.5%) the most used analytical technique, and applied topics (n = 332, 70%) the most common type of subject studied. The majority of first authors were associated with an academic health sciences library (n = 264, 55.7%). Only 27.4% (n = 130) of studies identified a funding source. Conclusion: This study's findings demonstrate that progress is being made in health sciences librarianship research. There is, however, room for improvement in terms of research methodologies used, proportion of applied versus theoretical research, and elimination of barriers to conducting research for practicing librarians. PMID:19626146

  11. Solid state sciences committee forum

    Science.gov (United States)

    Smith, Philip

    1992-05-01

    The 1991 SSSC Forum was conducted under the auspices of the Board on Physics and Astronomy's Solid State Sciences Committee (SSSC) and cosponsored with the National Materials Advisory Board (NMAB). The Forum was the culmination of a year-long dissemination effort following up the NCR study Materials Science and Engineering for the 1990s that was released in September of 1989 and successfully brought together experts and policy makers in the field of advanced materials processing to discuss issues pertinent to the field. Support for the Forum was provided by the Air Force office of Scientific Research (AFOSR), the Department of Energy (DOE), the National Science Foundation (NSF), and the office of Naval Research (ONR).

  12. A research of material input and environmental impact for Chinese economy:1990-2005

    Institute of Scientific and Technical Information of China (English)

    Liu Kailing; Duan Ning; Sun Qihong

    2009-01-01

    The process of economic activities is on the basis of tremendous material inputs.China has been discharging an enormous amount of waste, giving rise to a wide range of environmental impacts.The method of economy-wide material flow analysis (FW-MFA) is one of the effective tools to examine the flow of materials entering physical economies, and recognize early environmental problems.Relevant researches are still at the early stage in China and most focus on material throughput but are rarely concerned about the utilization of recycling resource and environmental impact.Based on more than 3,000 items of data related, materials entering Chinese economy,are classified into three types, and then the characteristics of material input and environmental impact are presented for the years 1990-2005 by using the indicators derived,from EW-MFA.The Ratio of Recycled Material (RRM)is added as the new indicator in order to be in accordance with the need of circular economy being promoted in China.Results show that the great changes in the structure of material input cause the continuous increase of industrial solid waste emissions and the bogging down of material productivity.The RRM reveals that the utilization of recycling resources remains at a fairly low level in China.Finally, some weakness of EW-MFA is discussed according to the calculated results.

  13. The Impact of Computer Science on the Development of Oulu ICT during 1985-1990

    Science.gov (United States)

    Oinas-Kukkonen, Henry; Similä, Jouni; Pulli, Petri; Oinas-Kukkonen, Harri; Kerola, Pentti

    The region of Oulu has been emphasizing the importance of electronics industry for its business growth since the 1960s. After a pitch-dark recession, the region developed in the 1990s into a new, well-established hub of information and communication technology (ICT) in Finland. The city with its 100,000 inhabitants occupied nearly 10,000 ICT professionals in 1995. This article will contribute to the body of research knowledge through analyzing the role of computer science, in particular information systems and software engineering, for the development of the ICT industry in Oulu in the latter half of the 1980s. This analysis is based on a variety of both primary and secondary sources. This article suggests that the system-theoretical and software-oriented research expertise played a key role for the rapid and successful ICT business development of the Oulu region.

  14. Density functional theory in materials science.

    Science.gov (United States)

    Neugebauer, Jörg; Hickel, Tilmann

    2013-09-01

    Materials science is a highly interdisciplinary field. It is devoted to the understanding of the relationship between (a) fundamental physical and chemical properties governing processes at the atomistic scale with (b) typically macroscopic properties required of materials in engineering applications. For many materials, this relationship is not only determined by chemical composition, but strongly governed by microstructure. The latter is a consequence of carefully selected process conditions (e.g., mechanical forming and annealing in metallurgy or epitaxial growth in semiconductor technology). A key task of computational materials science is to unravel the often hidden composition-structure-property relationships using computational techniques. The present paper does not aim to give a complete review of all aspects of materials science. Rather, we will present the key concepts underlying the computation of selected material properties and discuss the major classes of materials to which they are applied. Specifically, our focus will be on methods used to describe single or polycrystalline bulk materials of semiconductor, metal or ceramic form.

  15. Material Science Experiments on Mir

    Science.gov (United States)

    Kroes, Roger L.

    1999-01-01

    This paper describes the microgravity materials experiments carried out on the Shuttle/Mir program. There were six experiments, all of which investigated some aspect of diffusivity in liquid melts. The Liquid Metal Diffusion (LMD) experiment investigated the diffusivity of molten Indium samples at 185 C using a radioactive tracer, In-114m. By monitoring two different gamma ray energies (190 keV and 24 keV) emitted by the samples it was possible to measure independently the diffusion rates in the bulk and at the surface of the samples. The Queens University Experiment in Liquid Diffusion (QUELD) was the furnace facility used to process 213 samples for the five other experiments. These experiments investigated the diffusion, ripening, crystal growth, and glass formation in metal, semiconductor, and glass samples. This facility had the capability to process samples in an isothermal or gradient configuration for varying periods of time at temperatures up to 900 C. Both the LMD and the QUELD furnaces were mounted on the Microgravity Isolation Mount (MIM) which provided isolation from g-jitter. All the microgravity experiments were supported by the Space Acceleration Measurement System (SAMS); a three head three axes acceleration monitoring system which measured and recorded the acceleration environment.

  16. Material Science Experiments on Mir

    Science.gov (United States)

    Kroes, Roger L.

    1999-01-01

    This paper describes the microgravity materials experiments carried out on the Shuttle/Mir program. There were six experiments, all of which investigated some aspect of diffusivity in liquid melts. The Liquid Metal Diffusion (LMD) experiment investigated the diffusivity of molten Indium samples at 185 C using a radioactive tracer, In-114m. By monitoring two different gamma ray energies (190 keV and 24 keV) emitted by the samples it was possible to measure independently the diffusion rates in the bulk and at the surface of the samples. The Queens University Experiment in Liquid Diffusion (QUELD) was the furnace facility used to process 213 samples for the five other experiments. These experiments investigated the diffusion, ripening, crystal growth, and glass formation in metal, semiconductor, and glass samples. This facility had the capability to process samples in an isothermal or gradient configuration for varying periods of time at temperatures up to 900 C. Both the LMD and the QUELD furnaces were mounted on the Microgravity Isolation Mount (MIM) which provided isolation from g-jitter. All the microgravity experiments were supported by the Space Acceleration Measurement System (SAMS); a three head three axes acceleration monitoring system which measured and recorded the acceleration environment.

  17. Metallurgy, the Father of Materials Science

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The evolution of the discipline of materials science during the second half of the twentieth century is outlined. The concept emerged in the USA, almost simultaneously in an academic metallurgy department and in an avant-garde industrial research laboratory, and its development subsequently all over the world has been a joint enterprise involving universities, industrial laboratories and government establishments. The initial impetus came unambiguously from the well established discipline of physical metallurgy, but from the 1960s onwards, the input from solid-state physicists grew very rapidly, while materials chemistry is a later addition. Of all the many subdivisions of modern materials science, polymer science has been the slowest to fit under the umbrella of the broad discipline; its concepts are very different from those familiar to metallurgists. Two fields have contributed mightily to the creation of modern materials science: One is nuclear energy and, more specifically, the study of radiation damage, the other is the huge field of electronic and opto-electronic materials in which physics, chemistry and metallurgy are seamlessly combined.

  18. New activities and changing roles of health sciences librarians: a systematic review, 1990–2012

    Science.gov (United States)

    Cooper, I. Diane; Crum, Janet A

    2013-01-01

    Objective: The paper identifies and documents new health sciences librarian activities and roles during the period from 1990–2012. Methods: A systematic review of the literature was conducted using MEDLINE, Library and Information Abstracts, Library Literature, Scopus, and Web of Science. To find new roles that might not yet have been described in the literature, job announcements published in the Medical Library Association email discussion list archives from 2008–2012 were searched. For inclusion, an article needed to contain a substantive description of a new role and/or activity performed by librarians and be in the field of medical or health sciences librarianship. Papers that did not describe an actual (rather than proposed) librarian role were excluded. Results: New roles identified through the literature search were: embedded librarians (such as clinical informationist, bioinformationist, public health informationist, disaster information specialist); systematic review librarian; emerging technologies librarian; continuing medical education librarian; grants development librarian; and data management librarian. New roles identified through job announcements were digital librarian, metadata librarian, scholarly communication librarian, and translational research librarian. New twists to old roles were also identified: clinical medical librarian, instruction librarian, outreach librarian, and consumer health librarian. Conclusions: While the main purposes of health sciences librarianship remain the same, the new roles represent major new activities so that, for many librarians, daily on-the-job work is completely different. Implications: This list of new activities should inform students contemplating medical librarianship careers, guide formal and continuing education programs, and encourage other librarians to consider these new services. PMID:24163598

  19. Steels from materials science to structural engineering

    CERN Document Server

    Sha, Wei

    2013-01-01

    Steels and computer-based modelling are fast growing fields in materials science as well as structural engineering, demonstrated by the large amount of recent literature. Steels: From Materials Science to Structural Engineering combines steels research and model development, including the application of modelling techniques in steels.  The latest research includes structural engineering modelling, and novel, prototype alloy steels such as heat-resistant steel, nitride-strengthened ferritic/martensitic steel and low nickel maraging steel.  Researchers studying steels will find the topics vital to their work.  Materials experts will be able to learn about steels used in structural engineering as well as modelling and apply this increasingly important technique in their steel materials research and development. 

  20. Materials and Chemical Sciences Division annual report, 1987

    Energy Technology Data Exchange (ETDEWEB)

    1988-07-01

    Research programs from Lawrence Berkeley Laboratory in materials science, chemical science, nuclear science, fossil energy, energy storage, health and environmental sciences, program development funds, and work for others is briefly described. (CBS)

  1. Materials Sciences programs, Fiscal year 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-02-01

    This report provides a compilation and index of the DOE Materials Sciences Division programs; the compilation is to assist administrators, managers, and scientists to help coordinate research. The report is divided into 7 sections: laboratory projects, contract research projects, small business innovation research, major user facilities, other user facilities, funding level distributions, and indexes.

  2. Chemistry and Materials Science Strategic Plan

    Energy Technology Data Exchange (ETDEWEB)

    Rhodie, K B; Mailhiot, C; Eaglesham, D; Hartmann-Siantar, C L; Turpin, L S; Allen, P G

    2004-04-21

    Lawrence Livermore National Laboratory's mission is as clear today as it was in 1952 when the Laboratory was founded--to ensure our country's national security and the safety and reliability of its nuclear deterrent. As a laboratory pursuing applied science in the national interest, we strive to accomplish our mission through excellence in science and technology. We do this while developing and implementing sound and robust business practices in an environment that emphasizes security and ensures our safety and the safety of the community around us. Our mission as a directorate derives directly from the Laboratory's charter. When I accepted the assignment of Associate Director for Chemistry and Materials Science (CMS), I talked to you about the need for strategic balance and excellence in all our endeavors. We also discussed how to take the directorate to the next level. The long-range CMS strategic plan presented here was developed with this purpose in mind. It also aligns with the Lab's institutional long-range science and technology plan and its 10-year facilities and infrastructure site plan. The plan is aimed at ensuring that we fulfill our directorate's two governing principles: (1) delivering on our commitments to Laboratory programs and sponsors, and (2) anticipating change and capitalizing on opportunities through innovation in science and technology. This will require us to attain a new level of creativity, agility, and flexibility as we move forward. Moreover, a new level of engagement in partnerships with other directorates across the Laboratory as well as with universities and other national labs will also be required. The group of managers and staff that I chartered to build a strategic plan identified four organizing themes that define our directorate's work and unite our staff with a set of common goals. The plan presented here explains how we will proceed in each of these four theme areas: (1) Materials properties and

  3. Avaldus : [13. jaanuar 1991

    Index Scriptorium Estoniae

    1991-01-01

    NSVL juhtkonna aktsioonidest Balti riikide suhtes. Vene keeles vt. Путь к переговорам с Союзом ССР. Т. 1 : март 1990 г. - май 1991 г. : Вильнюс,1991, lk. 239-240

  4. Avaldus : [13. jaanuar 1991

    Index Scriptorium Estoniae

    1991-01-01

    NSVL juhtkonna aktsioonidest Balti riikide suhtes. Vene keeles vt. Путь к переговорам с Союзом ССР. Т. 1 : март 1990 г. - май 1991 г. : Вильнюс,1991, lk. 239-240

  5. Understanding solids the science of materials

    CERN Document Server

    Tilley, Richard J D

    2005-01-01

    A modern introduction to the subject taking a unique integrated approach designed to appeal to both science and engineering students. Covering a broad spectrum of topics, this book includes numerous up-to-date examples of real materials with relevant applications and a modern treatment of key concepts. The science bias allows this book to be equally accessible to engineers, chemists and physicists. * Carefully structured into self-contained bite-sized chapters to enhance student understanding * Questions have been designed to reinforce the concepts presented * Includes coverage of radioactivit

  6. Energy technology review, July--August 1991

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, K.C. (ed.)

    1991-01-01

    This issue of Energy Technology Review'' gives the annual review of the programs at Lawrence Livermore National Laboratory. This State of the Laboratory issue includes discussions of all major programs: Defense Systems; Laser Research; Magnetic Fusion Energy; Energy and Earth Sciences; Environmental Technology Program; Biomedical and Environmental Science; Engineering; Physics; Chemistry and Materials Science; Computations; and Administrative and Institutional Services. An index is also given of the 1991 achievements with contact names and telephone number.

  7. Oceanic CO sub 2 measurements for the WOCE hydrographic survey in the Pacific Ocean, 1990--1991: Shore based analyses during Legs 1--3

    Energy Technology Data Exchange (ETDEWEB)

    Keeling, C.D.

    1992-01-01

    During the winter and spring of 1991 we made preparations for sampling on three legs of the US World Ocean Circulation Experiment in the Pacific Ocean. These transects, postponed from an original start date early in 1991, took place between May 31 to October 1. For the project, 1400 0.5 liter Pyrex sampling bottles were used for the collection of sea water. A second major pre-expedition task was the construction of a dual titration cell system of new design, as described in the original proposal and our previous semi-annual report.

  8. Oceanic CO{sub 2} measurements for the WOCE hydrographic survey in the Pacific Ocean, 1990--1991: Shore based analyses during Legs 1--3. Technical progress report, 1 December 1990--28 January 1992

    Energy Technology Data Exchange (ETDEWEB)

    Keeling, C.D.

    1992-05-01

    During the winter and spring of 1991 we made preparations for sampling on three legs of the US World Ocean Circulation Experiment in the Pacific Ocean. These transects, postponed from an original start date early in 1991, took place between May 31 to October 1. For the project, 1400 0.5 liter Pyrex sampling bottles were used for the collection of sea water. A second major pre-expedition task was the construction of a dual titration cell system of new design, as described in the original proposal and our previous semi-annual report.

  9. Surface analysis methods in materials science

    CERN Document Server

    Sexton, Brett; Smart, Roger

    1992-01-01

    The idea for this book stemmed from a remark by Philip Jennings of Murdoch University in a discussion session following a regular meeting of the Australian Surface Science group. He observed that a text on surface analysis and applica­ tions to materials suitable for final year undergraduate and postgraduate science students was not currently available. Furthermore, the members of the Australian Surface Science group had the research experience and range of coverage of sur­ face analytical techniques and applications to provide a text for this purpose. A of techniques and applications to be included was agreed at that meeting. The list intended readership of the book has been broadened since the early discussions, particularly to encompass industrial users, but there has been no significant alter­ ation in content. The editors, in consultation with the contributors, have agreed that the book should be prepared for four major groups of readers: - senior undergraduate students in chemistry, physics, metallur...

  10. Environmental Sciences Division annual progress report for period ending September 30, 1990

    Energy Technology Data Exchange (ETDEWEB)

    1991-04-01

    The Environmental Sciences Division (ESD) of Oak Ridge National Laboratory (ORNL) conducts research on the environmental aspects of existing and emerging energy systems and applies this information to ensure that technology development and energy use are consistent with national environmental health and safety goals. Offering an interdisciplinary resource of staff and facilities to address complex environmental problems, the division is currently providing technical leadership for major environmental issues of national concern: (1) acidic deposition and related environmental effects, (2) effects of increasing concentrations of atmospheric CO{sub 2} and the resulting climatic changes to ecosystems and natural and physical resources, (3) hazardous chemical and radioactive waste disposal and remediation research and development, and (4) development of commercial biomass energy production systems. This progress report outlines ESD's accomplishments in these and other areas in FY 1990. Individual reports are processed separately for the data bases in the following areas: ecosystem studies; environmental analyses; environmental toxicology; geosciences; technical and administrative support; biofuels feedstock development program; carbon dioxide information analysis and research program; and environmental waste program.

  11. Brilliant Light in Life and Material Sciences

    CERN Document Server

    Tsakanov, Vasili

    2007-01-01

    The present book contains an excellent overview of the status and highlights of brilliant light facilities and their applications in biology, chemistry, medicine, materials and environmental sciences. Overview papers on diverse fields of research by leading experts are accompanied by the highlights in the near and long-term perspectives of brilliant X-Ray photon beam usage for fundamental and applied research. The book includes advanced topics in the fields of high brightness photon beams, instrumentation, the spectroscopy, microscopy, scattering and imaging experimental techniques and their applications. The book is strongly recommended for students, engineers and scientists in the field of accelerator physics, X-ray optics and instrumentation, life, materials and environmental sciences, bio and nanotechnology.

  12. Materials Science Research Rack-1 (MSRR-1)

    Science.gov (United States)

    2001-01-01

    This scale model depicts the Materials Science Research Rack-1 (MSRR-1) being developed by NASA's Marshall Space Flight Center and the European Space Agency (ESA) for placement in the Destiny laboratory module aboard the International Space Station. The rack is part of the plarned Materials Science Research Facility (MSRF) and is expected to include two furnace module inserts, a Quench Module Insert (being developed by NASA's Marshall Space Flight Center) to study directional solidification in rapidly cooled alloys and a Diffusion Module Insert (being developed by the European Space Agency) to study crystal growth, and a transparent furnace (being developed by NASA's Space Product Development program). Multi-user equipment in the rack is being developed under the auspices of NASA's Office of Biological and Physical Research (OBPR) and ESA. Key elements are labeled in other images (0101754, 0101829, 0101830, and TBD). This image is from a digital still camera; higher resolution is not available.

  13. Material science experiments at the ATLAS facility

    CERN Document Server

    Keinigs, R K; Atchison, W L; Bartsch, R R; Faehl, R J; Flower-Maudlin, E C; Hammerberg, J E; Holtkamp, D B; Kyrala, G A; Oro, D M; Parker, J V; Preston, D L; Removsky, R E; Scudder, D W; Sheehey, P T; Shlachter, J S; Taylor, A J; Tonks, D L; Turchi, P J; Chandler, E A

    2001-01-01

    Summary form only given, as follows. Three experimental campaigns designed for fielding on the Atlas Pulsed Power Facility are discussed. The foci of these experiments are directed toward a better understanding of three material science issues; (1) strength at high strain and high strain rate, (2) friction at material interfaces moving at high relative velocities, and (3) material failure in convergent geometry. Atlas provides an environment for investigating these problems in parameter regimes and geometries that are inaccessible with standard techniques. For example, flow stress measurements of material strength using conventional Hopkinson bar experiments are limited to strain rates ~10/sup 4/ sec/sup -1/. Atlas will be capable of imploding metal shells to combined strains of 200% and strain rates >10/sup 6/ sec/sup -1/. Data obtained regimes is used to test different constitutive strength models used in several Los Alamos hydrocodes. Dynamic friction has been investigated for nearly 300 years, but a first...

  14. Thermal Boundary Conductance: A Materials Science Perspective

    Science.gov (United States)

    Monachon, Christian; Weber, Ludger; Dames, Chris

    2016-07-01

    The thermal boundary conductance (TBC) of materials pairs in atomically intimate contact is reviewed as a practical guide for materials scientists. First, analytical and computational models of TBC are reviewed. Five measurement methods are then compared in terms of their sensitivity to TBC: the 3ω method, frequency- and time-domain thermoreflectance, the cut-bar method, and a composite effective thermal conductivity method. The heart of the review surveys 30 years of TBC measurements around room temperature, highlighting the materials science factors experimentally proven to influence TBC. These factors include the bulk dispersion relations, acoustic contrast, and interfacial chemistry and bonding. The measured TBCs are compared across a wide range of materials systems by using the maximum transmission limit, which with an attenuated transmission coefficient proves to be a good guideline for most clean, strongly bonded interfaces. Finally, opportunities for future research are discussed.

  15. Numerical modeling in materials science and engineering

    CERN Document Server

    Rappaz, Michel; Deville, Michel

    2003-01-01

    This book introduces the concepts and methodologies related to the modelling of the complex phenomena occurring in materials processing. After a short reminder of conservation laws and constitutive relationships, the authors introduce the main numerical methods: finite differences, finite volumes and finite elements. These techniques are developed in three main chapters of the book that tackle more specific problems: phase transformation, solid mechanics and fluid flow. The two last chapters treat inverse methods to obtain the boundary conditions or the material properties and stochastic methods for microstructural simulation. This book is intended for undergraduate and graduate students in materials science and engineering, mechanical engineering and physics and for engineering professionals or researchers who want to get acquainted with numerical simulation to model and compute materials processing.

  16. Materials sciences programs fiscal year 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    The purpose of this report is to provide a convenient compilation and index of the DOE Materials Sciences Division programs. This compilation is primarily intended for use by administrators, managers, and scientists to help coordinate research. The report is divided into eight sections. Section A contains all Laboratory projects, Section B has all contract research projects, Section C has projects funded under the Small Business Innovation Research Program, Section D describes the Center of Excellence for the Synthesis and Processing of Advanced Materials and E has information on major user facilities. F describes other user facilities, G as a summary of funding levels and H has indices characterizing research projects.

  17. Materials sciences programs: Fiscal year 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    The purpose of this report is to provide a convenient compilation and index of the DOE Materials Science Division programs. This compilation is primarily intended for use by administrators, managers, and scientists to help coordinate research. The report is divided into eight sections. Section A contains all Laboratory projects, Section B has all contract research projects, Section C has projects funded under the Small Business Innovation Research Program, Section D describes the Center of Excellence for the Synthesis and Processing of Advanced Materials and E has information on major user facilities. F describes other user facilities, G as a summary of funding levels and H has indices characterizing research projects.

  18. Annual Report: Photovoltaic Subcontract Program FY 1991

    Energy Technology Data Exchange (ETDEWEB)

    Summers, K. A.

    1992-03-01

    This report summarizes the fiscal year (FY) 1991 (October 1, 1990, through September 30, 1991) progress of the subcontracted photovoltaic (PV) research and development (R&D) performed under the Photovoltaic Advanced Research and Development Project at the National Renewable Energy Laboratory (NREL)-formerly the Solar Energy Research Institute (SERI). The mission of the national PV program is to develop PV technology for large-scale generation of economically competitive electric power in the United States. The technical sections of the report cover the main areas of the subcontract program: the Amorphous Silicon Research Project, Polycrystalline Thin Films, Crystalline Silicon Materials Research, High Efficiency Concepts, the New Ideas Program, the University Participation Program, and the Photovoltaic Manufacturing Technology (PVMaT) project. Technical summaries of each of the subcontracted programs provide a discussion of approaches, major accomplishments in FY 1991, and future research directions.

  19. Proceedings of Lunar and Planetary Science, Volume 22; Conference, Houston, TX, Mar. 18-22, 1991

    Science.gov (United States)

    Ryder, Graham (Editor); Sharpton, Virgil L. (Editor)

    1992-01-01

    Various papers on lunar and planetary science are presented. Individual topics addressed include: analysis of Phobos Mission Gamma ray spectra from Mars, comparison of volcanic and modified landforms from Tharsis Montes on Mars, polygenetic origin of Hrad Vallis region of Mars, new evidence of lacustrine basins on Mars, flood surge through the Lunae Planum Outflow Complex on Mars, interpretation of canyon materials and flood sources on Kasei Valles on Mars, geochemistry of Manson Impact structure rocks, micrometer-sized glass spheres in Apollo 16 soil 61181, isotopic abundances in Pesyanoe of solar-type xenon, mineralogy of 12 large 'chondritic' interplanetary dust particles. Also discussed are: trace elements in chondritic stratospheric particles, evolution of isotopic signatures in lunar regolith nitrogen, pyroclastic deposits on the western limb of the moon, origin of picritic green glass magmas by polybaric fractional fusion, origin of yellow glasses associated with Apollo 15 KREEP basalt fragments, trace elements in 59 mostly highland moon rocks, mineralization on the moon, relation between diogenite cumulates and eucrite magmas.

  20. Chemistry and materials science research report

    Energy Technology Data Exchange (ETDEWEB)

    1990-05-31

    The research reported here in summary form was conducted under the auspices of Weapons-Supporting Research (WSR) and Institutional Research and Development (IR D). The period covered is the first half of FY90. The results reported here are for work in progress; thus, they may be preliminary, fragmentary, or incomplete. Research in the following areas are briefly described: energetic materials, tritium, high-Tc superconductors, interfaces, adhesion, bonding, fundamental aspects of metal processing, plutonium, synchrotron-radiation-based materials science, photocatalysis on doped aerogels, laser-induced chemistry, laser-produced molecular plasmas, chemistry of defects, dta equipment development, electronic structure study of the thermodynamic and mechanical properties of Al-Li Alloys, and the structure-property link in sub-nanometer materials.

  1. Progress in the materials science of silicene.

    Science.gov (United States)

    Yamada-Takamura, Yukiko; Friedlein, Rainer

    2014-12-01

    In its freestanding, yet hypothetical form, the Si counterpart of graphene called silicene is predicted to possess massless Dirac fermions and to exhibit an experimentally accessible quantum spin Hall effect. Such interesting electronic properties are not realized in two-dimensional (2D) Si honeycomb lattices prepared recently on metallic substrates where the crystal and hybrid electronic structures of these 'epitaxial silicene' phases are strongly influenced by the substrate, and thus different from those predicted for isolated 2D structures. While the realization of such low-dimensional Si π materials has hardly been imagined previously, it is evident that the materials science behind silicene remains challenging. In this contribution, we will review our recent results that lead to an enhanced understanding of epitaxial silicene formed on diboride thin films, and discuss the remaining challenges that must be addressed in order to turn Si 2D nanostructures into technologically interesting nanoelectronic materials.

  2. Material science lesson from the biological photosystem

    Science.gov (United States)

    Kim, Younghye; Lee, Jun Ho; Ha, Heonjin; Im, Sang Won; Nam, Ki Tae

    2016-08-01

    Inspired by photosynthesis, artificial systems for a sustainable energy supply are being designed. Each sequential energy conversion process from light to biomass in natural photosynthesis is a valuable model for an energy collection, transport and conversion system. Notwithstanding the numerous lessons of nature that provide inspiration for new developments, the features of natural photosynthesis need to be reengineered to meet man's demands. This review describes recent strategies toward adapting key lessons from natural photosynthesis to artificial systems. We focus on the underlying material science in photosynthesis that combines photosystems as pivotal functional materials and a range of materials into an integrated system. Finally, a perspective on the future development of photosynthesis mimetic energy systems is proposed.

  3. Perspective: Materials informatics and big data: Realization of the "fourth paradigm" of science in materials science

    Science.gov (United States)

    Agrawal, Ankit; Choudhary, Alok

    2016-05-01

    Our ability to collect "big data" has greatly surpassed our capability to analyze it, underscoring the emergence of the fourth paradigm of science, which is data-driven discovery. The need for data informatics is also emphasized by the Materials Genome Initiative (MGI), further boosting the emerging field of materials informatics. In this article, we look at how data-driven techniques are playing a big role in deciphering processing-structure-property-performance relationships in materials, with illustrative examples of both forward models (property prediction) and inverse models (materials discovery). Such analytics can significantly reduce time-to-insight and accelerate cost-effective materials discovery, which is the goal of MGI.

  4. Nanobiotechnology: synthetic biology meets materials science.

    Science.gov (United States)

    Jewett, Michael C; Patolsky, Fernando

    2013-08-01

    Nanotechnology, the area of science focused on the control of matter in the nanometer scale, allows ground-breaking changes of the fundamental properties of matter that are often radically different compared to those exhibited by the bulk counterparts. In view of the fact that dimensionality plays a key role in determining the qualities of matter, the realization of the great potential of nanotechnology has opened the door to other disciplines such as life sciences and medicine, where the merging between them offers exciting new applications, along with basic science research. The application of nanotechnology in life sciences, nanobiotechnology, is now having a profound impact on biological circuit design, bioproduction systems, synthetic biology, medical diagnostics, disease therapy and drug delivery. This special issue is dedicated to the overview of how we are learning to control biopolymers and biological machines at the molecular- and nanoscale. In addition, it covers far-reaching progress in the design and synthesis of nanoscale materials, thus enabling the construction of integrated systems in which the component blocks are comparable in size to the chemical and biological entities under investigation.

  5. Ukrainian Program for Material Science in Microgravity

    Science.gov (United States)

    Fedorov, Oleg

    Ukrainian Program for Material Sciences in Microgravity O.P. Fedorov, Space Research Insti-tute of NASU -NSAU, Kyiv, The aim of the report is to present previous and current approach of Ukrainian research society to the prospect of material sciences in microgravity. This approach is based on analysis of Ukrainian program of research in microgravity, preparation of Russian -Ukrainian experiments on Russian segment of ISS and development of new Ukrainian strategy of space activity for the years 2010-2030. Two parts of issues are discussed: (i) the evolution of our views on the priorities in microgravity research (ii) current experiments under preparation and important ground-based results. item1 The concept of "space industrialization" and relevant efforts in Soviet and post -Soviet Ukrainian research institutions are reviewed. The main topics are: melt supercooling, crystal growing, testing of materials, electric welding and study of near-Earth environment. The anticipated and current results are compared. item 2. The main experiments in the framework of Ukrainian-Russian Research Program for Russian Segment of ISS are reviewed. Flight installations under development and ground-based results of the experiments on directional solidification, heat pipes, tribological testing, biocorrosion study is presented. Ground-based experiments and theoretical study of directional solidification of transparent alloys are reviewed as well as preparation of MORPHOS installation for study of succinonitrile -acetone in microgravity.

  6. With Whom Does LANL Publish? – A look at LANL collaborations from 1990 -2015 using the Web of Science

    Energy Technology Data Exchange (ETDEWEB)

    Springer, Everett P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-10-17

    Collaborations are critical to the science, technology, and engineering achievements at Los Alamos National Laboratory (LANL). This report analyzed the collaborations as measured through peer-reviewed publications from the Web of Science (WoS) database for LANL for the 1990 – 2015 period. Both a cumulative analysis over the entire time period and annual analyses were performed. The results found that the Department of Energy national laboratories, University of California campuses, and other academic institutions collaborate with LANL on regular basis. Results provide insights into trends in peer-reviewed papers collaborations for LANL.

  7. Comprehensive Instructional Management Systems (CIMS)--Science 1991-92. OREA Report.

    Science.gov (United States)

    New York City Board of Education, Brooklyn, NY. Office of Research, Evaluation, and Assessment.

    The Comprehensive Instructional Management System (CIMS)-Science program is designed to support teachers in teaching the "New York State Elementary Science Syllabus." The curriculum emphasizes a hands-on inquiry approach to learning and includes an assessment component comprised of written tests and performance-based tests, designed to…

  8. Three-year summary report of biological monitoring at the Southwest Ocean dredged-material disposal site and additional locations off Grays Harbor, Washington, 1990--1992

    Energy Technology Data Exchange (ETDEWEB)

    Antrim, L.D.; Shreffler, D.K.; Pearson, W.H.; Cullinan, V.I. [Battelle Marine Research Lab., Sequim, WA (United States)

    1992-12-01

    The Grays Harbor Navigation Improvement Project was initiated to improve navigation by widening and deepening the federal channel at Grays Harbor. Dredged-material disposal sites were selected after an extensive review process that included inter-agency agreements, biological surveys, other laboratory and field studies, and preparation of environmental impact statements The Southwest Site, was designated to receive materials dredged during annual maintenance dredging as well as the initial construction phase of the project. The Southwest Site was located, and the disposal operations designed, primarily to avoid impacts to Dungeness crab. The Final Environmental Impact Statement Supplement for the project incorporated a Site Monitoring Plan in which a tiered approach to disposal site monitoring was recommended. Under Tier I of the Site Monitoring Plan, Dungeness crab densities are monitored to confirm that large aggregations of newly settled Dungeness crab have not moved onto the Southwest Site. Tier 2 entails an increased sampling effort to determine whether a change in disposal operations is needed. Four epibenthic surveys using beam trawls were conducted in 1990, 1991, and 1992 at the Southwest Site and North Reference area, where high crab concentrations were found in the spring of 1985. Survey results during these three years prompted no Tier 2 activities. Epibenthic surveys were also conducted at two nearshore sites where construction of sediment berms has been proposed. This work is summarized in an appendix to this report.

  9. Pacific Northwest Laboratory annual report for 1991 to the DOE Office of Energy Research. Part 2, Environmental sciences

    Energy Technology Data Exchange (ETDEWEB)

    Perez, D.A. [ed.

    1992-02-01

    This report summarizes progress in environmental sciences research conducted by Pacific Northwest Laboratory (PNL) for the US Department of Energy`s (DOE) Office of Health and Environmental Research in FY 1991. Each project in the PNL research program is a component in an integrated laboratory, intermediate-scale, and field approach designed to examine multiple phenomena at increasing levels of complexity. Examples include definition of the role of fundamental geochemical and physical phenomena on the diversity and function of microorganisms in the deep subsurface, and determination of the controls on nutrient, water, and energy dynamics in arid ecosystems and their response to stress at the landscape scale. The Environmental Science Research Center has enable PNL to extend fundamental knowledge of subsurface science to develop emerging new concepts for use in natural systems and in environmental restoration of DOE sites. New PNL investments have been made in developing advanced concepts for addressing chemical desorption kinetics, enzyme transformations and redesign, the role of heterogeneity in contaminant transport, and modeling of fundamental ecological processes.

  10. Multicultural Science Education and Curriculum Materials

    Science.gov (United States)

    Atwater, Mary M.

    2010-01-01

    This article describes multicultural science education and explains the purposes of multicultural science curricula. It also serves as an introductory article for the other multicultural science education activities in this special issue of "Science Activities".

  11. The Mars Science Laboratory Organic Check Material

    Science.gov (United States)

    Conrad, Pamela G.; Eigenbrode, J. E.; Mogensen, C. T.; VonderHeydt, M. O.; Glavin, D. P.; Mahaffy, P. M.; Johnson, J. A.

    2011-01-01

    The Organic Check Material (OCM) has been developed for use on the Mars Science Laboratory mission to serve as a sample standard for verification of organic cleanliness and characterization of potential sample alteration as a function of the sample acquisition and portioning process on the Curiosity rover. OCM samples will be acquired using the same procedures for drilling, portioning and delivery as are used to study martian samples with The Sample Analysis at Mars (SAM) instrument suite during MSL surface operations. Because the SAM suite is highly sensitive to organic molecules, the mission can better verify the cleanliness of Curiosity's sample acquisition hardware if a known material can be processed through SAM and compared with the results obtained from martian samples.

  12. Archive of Digitized Analog Boomer Seismic Reflection Data Collected from the Mississippi-Alabama-Florida Shelf During Cruises Onboard the R/V Kit Jones, June 1990 and July 1991

    Science.gov (United States)

    Sanford, Jordan M.; Harrison, Arnell S.; Wiese, Dana S.; Flocks, James G.

    2009-01-01

    In June of 1990 and July of 1991, the U.S. Geological Survey (USGS) conducted geophysical surveys to investigate the shallow geologic framework of the Mississippi-Alabama-Florida shelf in the northern Gulf of Mexico, from Mississippi Sound to the Florida Panhandle. Work was done onboard the Mississippi Mineral Resources Institute R/V Kit Jones as part of a project to study coastal erosion and offshore sand resources. This report is part of a series to digitally archive the legacy analog data collected from the Mississippi-Alabama SHelf (MASH). The MASH data rescue project is a cooperative effort by the USGS and the Minerals Management Service (MMS). This report serves as an archive of high-resolution scanned Tagged Image File Format (TIFF) and Graphics Interchange Format (GIF) images of the original boomer paper records, navigation files, trackline maps, Geographic Information System (GIS) files, cruise logs, and formal Federal Geographic Data Committee (FGDC) metadata.

  13. A new direction in mathematics for materials science

    CERN Document Server

    Ikeda, Susumu

    2015-01-01

    This book is the first volume of the SpringerBriefs in the Mathematics of Materials and provides a comprehensive guide to the interaction of mathematics with materials science. The anterior part of the book describes a selected history of materials science as well as the interaction between mathematics and materials in history. The emergence of materials science was itself a result of an interdisciplinary movement in the 1950s and 1960s. Materials science was formed by the integration of metallurgy, polymer science, ceramics, solid state physics, and related disciplines. We believe that such historical background helps readers to understand the importance of interdisciplinary interaction such as mathematics–materials science collaboration. The middle part of the book describes mathematical ideas and methods that can be applied to materials problems and introduces some examples of specific studies—for example, computational homology applied to structural analysis of glassy materials, stochastic models for ...

  14. Gender Equity in Materials Science and Engineering

    Energy Technology Data Exchange (ETDEWEB)

    Angus Rockett

    2008-12-01

    At the request of the University Materials Council, a national workshop was convened to examine 'Gender Equity Issues in Materials Science and Engineering.' The workshop considered causes of the historic underrepresentation of women in materials science and engineering (MSE), with a goal of developing strategies to increase the gender diversity of the discipline in universities and national laboratories. Specific workshop objectives were to examine efforts to level the playing field, understand implicit biases, develop methods to minimize bias in all aspects of training and employment, and create the means to implement a broadly inclusive, family-friendly work environment in MSE departments. Held May 18-20, 2008, at the Conference Center at the University of Maryland, the workshop included heads and chairs of university MSE departments and representatives of the National Science Foundation (NSF), the Office of Basic Energy Sciences of the Department of Energy (DOE-BES), and the national laboratories. The following recommendations are made based on the outcomes of the discussions at the workshop. Many or all of these apply equally well to universities and national laboratories and should be considered in context of industrial environments as well. First, there should be a follow-up process by which the University Materials Council (UMC) reviews the status of women in the field of MSE on a periodic basis and determines what additional changes should be made to accelerate progress in gender equity. Second, all departments should strengthen documentation and enforcement of departmental procedures such that hiring, promotion, compensation, and tenure decisions are more transparent, that the reasons why a candidate was not selected or promoted are clear, and that faculty are less able to apply their biases to personnel decisions. Third, all departments should strengthen mentoring of junior faculty. Fourth, all departments must raise awareness of gender biases

  15. 1991 Annual report on scientific programs: A broad research program on the sciences of complexity

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-31

    1991 was continued rapid growth for the Santa Fe Institute (SFI) as it broadened its interdisciplinary research into the organization, evolution and operation of complex systems and sought deeply the principles underlying their dynamic behavior. Research on complex systems--the focus of work at SFI--involves an extraordinary range of topics normally studied in seemingly disparate fields. Natural systems displaying complex behavior range upwards from proteins and DNA through cells and evolutionary systems to human societies. Research models exhibiting complexity include nonlinear equations, spin glasses, cellular automata, genetic algorithms, classifier systems, and an array of other computational models. Some of the major questions facing complex systems researchers are: (1) explaining how complexity arises from the nonlinear interaction of simples components, (2) describing the mechanisms underlying high-level aggregate behavior of complex systems (such as the overt behavior of an organism, the flow of energy in an ecology, the GNP of an economy), and (3) creating a theoretical framework to enable predictions about the likely behavior of such systems in various conditions. The importance of understanding such systems in enormous: many of the most serious challenges facing humanity--e.g., environmental sustainability, economic stability, the control of disease--as well as many of the hardest scientific questions--e.g., protein folding, the distinction between self and non-self in the immune system, the nature of intelligence, the origin of life--require deep understanding of complex systems.

  16. 1991 Annual report on scientific programs: A broad research program on the sciences of complexity

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    1991 was continued rapid growth for the Santa Fe Institute (SFI) as it broadened its interdisciplinary research into the organization, evolution and operation of complex systems and sought deeply the principles underlying their dynamic behavior. Research on complex systems--the focus of work at SFI--involves an extraordinary range of topics normally studied in seemingly disparate fields. Natural systems displaying complex behavior range upwards from proteins and DNA through cells and evolutionary systems to human societies. Research models exhibiting complexity include nonlinear equations, spin glasses, cellular automata, genetic algorithms, classifier systems, and an array of other computational models. Some of the major questions facing complex systems researchers are: (1) explaining how complexity arises from the nonlinear interaction of simples components, (2) describing the mechanisms underlying high-level aggregate behavior of complex systems (such as the overt behavior of an organism, the flow of energy in an ecology, the GNP of an economy), and (3) creating a theoretical framework to enable predictions about the likely behavior of such systems in various conditions. The importance of understanding such systems in enormous: many of the most serious challenges facing humanity--e.g., environmental sustainability, economic stability, the control of disease--as well as many of the hardest scientific questions--e.g., protein folding, the distinction between self and non-self in the immune system, the nature of intelligence, the origin of life--require deep understanding of complex systems.

  17. Polyoxometalates: from inorganic chemistry to materials science.

    Science.gov (United States)

    Casañ-Pastor, Nieves; Gómez-Romero, Pedro

    2004-05-01

    Polyoxometalates have been traditionally the subject of study of molecular inorganic chemistry. Yet, these polynuclear molecules, reminiscent of oxide clusters, present a wide range of structures and with them ideal frameworks for the deployment of a plethora of useful magnetic, electroionic, catalytic, bioactive and photochemical properties. With this in mind, a new trend towards the application of these remarkable species in materials science is beginning to develop. In this review we analyze this trend and discuss two main lines of thought for the application of polyoxometalates as materials. On the one hand, there is their use as clusters with inherently useful properties on themselves, a line which has produced fundamental studies of their magnetic, electronic or photoelectrochemical properties and has shown these clusters as models for quantum-sized oxides. On the other hand, the encapsulation or integration of polyoxometalates into organic, polymeric or inorganic matrices or substrates opens a whole new field within the area of hybrid materials for harnessing the multifunctional properties of these versatile species in a wide variety of applications, ranging from catalysis to energy storage to biomedicine.

  18. Elk tooth aging results - 1986, 1990, and 1990

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The Charles M. Russel NWR Wildlife Biologist, Randy Matchett shares elk tooth aging results with all CMR staff from the years 1986, 1990, and 1991. Most of the...

  19. Innovative Video Diagnostic Equipment for Material Science

    Science.gov (United States)

    Capuano, G.; Titomanlio, D.; Soellner, W.; Seidel, A.

    2012-01-01

    Materials science experiments under microgravity increasingly rely on advanced optical systems to determine the physical properties of the samples under investigation. This includes video systems with high spatial and temporal resolution. The acquisition, handling, storage and transmission to ground of the resulting video data are very challenging. Since the available downlink data rate is limited, the capability to compress the video data significantly without compromising the data quality is essential. We report on the development of a Digital Video System (DVS) for EML (Electro Magnetic Levitator) which provides real-time video acquisition, high compression using advanced Wavelet algorithms, storage and transmission of a continuous flow of video with different characteristics in terms of image dimensions and frame rates. The DVS is able to operate with the latest generation of high-performance cameras acquiring high resolution video images up to 4Mpixels@60 fps or high frame rate video images up to about 1000 fps@512x512pixels.

  20. Molecular forensic science analysis of nuclear materials

    Science.gov (United States)

    Reilly, Dallas David

    Concerns over the proliferation and instances of nuclear material in the environment have increased interest in the expansion of nuclear forensics analysis and attribution programs. A new related field, molecular forensic science (MFS) has helped meet this expansion by applying common scientific analyses to nuclear forensics scenarios. In this work, MFS was applied to three scenarios related to nuclear forensics analysis. In the first, uranium dioxide was synthesized and aged at four sets of static environmental conditions and studied for changes in chemical speciation. The second highlighted the importance of bulk versus particle characterizations by analyzing a heterogeneous industrially prepared sample with similar techniques. In the third, mixed uranium/plutonium hot particles were collected from the McGuire Air Force Base BOMARC Site and analyzed for chemical speciation and elemental surface composition. This work has identified new signatures and has indicated unexpected chemical behavior under various conditions. These findings have lead to an expansion of basic actinide understanding, proof of MFS as a tool for nuclear forensic science, and new areas for expansion in these fields.

  1. Benthic data from bottom grabs from Prince William Sound in support of Exxon Valdez Oil Spill Restoration Project from the R/V DAVIDSON and R/V BIG VALLEY from 03 July 1990 to 25 June of 1991 (NODC Accession 0000447)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Benthic samples and other data were collected from the R/V DAVIDSON and R/V BIG VALLEY from the Prince William Sound from 03 July 1990 to 25 June of 1991 . Data were...

  2. Medipix3 CT for material sciences

    Science.gov (United States)

    Procz, S.; Wartig, K.-A.; Fauler, A.; Zwerger, A.; Luebke, J.; Ballabriga, R.; Blaj, G.; Campbell, M.; Mix, M.; Fiederle, M.

    2013-01-01

    Innovative detector systems for non-destructive material analysis and for medical diagnosis are an important development to improve the performance and the quality of examination methods. For a number of years now photon-counting X-ray detectors are being developed to process incoming X-ray photons as single events. These detectors facilitate a higher signal-to-noise ratio (SNR) than conventional, non-photon-counting, scintillator based detector systems, which detect X-ray photons indirectly through conversion into visible light. The Medipix is a pixelated photon counting semiconductor detector which features adjustable energy thresholds allowing energy selective, multispectral X-ray imaging. The Medipix chip is under continued development by the ``Medipix2 Collaboration'' and ``Medipix3 Collaboration'' at CERN [1]. The Medipix electronic offers 256 × 256 pixels with a pixel pitch of 55 × 55 μm2 and can be hybridized with different sensor materials like Si, CdTe or GaAs. The newest member of the Medipix family is the Medipix3 (ASIC in 0.13 μm CMOS technology) providing up to eight separate 12-bit counters per pixel. It offers a couple of different working modes [2], which are useful for X-ray imaging applications. A Medipix3 CT X-ray measuring station was built up for small animal X-ray imaging and non-destructive material analysis [3]. The combination of the low energy threshold ( ~ 4 keV) of the Medipix3 with its multispectral capability enables tomographic investigations on objects with low absorption contrast. The advantage of photon counting, multispectral detectors like Medipix3 for material sciences will be presented here as well as a comparison with a scintillator based CT.

  3. Focuses of material science development in recent years

    Institute of Scientific and Technical Information of China (English)

    WANG Jing

    2011-01-01

    Materials science is an interdisciplinary field applying the properties of matter to various areas of science and engineering.This scientific field investigates the relationship between the structure of materials at atomic or molecular scales and their macroscopic properties.It incorporates elements of applied physics and chemistry.With significant media attention focused on nanoscience and nanotechnology in recent years,materials science has been propelled to the forefront at many universities.Materials science encompasses various classes of materials,including electronic materials,functional ceramics,magnesium,material and processes for flat-panel displays,eco/environmental materials,sustainable energy materials,transportation materials,electronic packaging materials,etc.

  4. Mutations in Soviet public health science: post-Lysenko medical genetics, 1969-1991.

    Science.gov (United States)

    Bauer, Susanne

    2014-09-01

    This paper traces the integration of human genetics with Soviet public health science after the Lysenko era. For nearly three decades, USSR biology pursued its own version of anti-bourgeois, Soviet 'creative Darwinism', departing from western, post-WWII scientific developments. After Lysenko was suspended, research niches of immunology, biophysics and mutation research formed the basis of new departments at the Institute of Medical Genetics, which was founded in 1969 as part of the Soviet Academy of Medical Sciences. Focussing on early research activities and collaborations at the institute, I show how the concept of mutagenesis, a pivotal issue during the Cold War, became mobilized from Drosophila genetics to human heredity and to society as a whole. This mode of scaling up and down through population studies shaped not only Soviet human biology and genetics; it also brought about changes in clinical practice and public health as well as in the monitoring and regulation of mutagenic agents in the environment.

  5. Bulletin of the State Statistical Bureau of the People's Republic of China on major figures of 1990 Population Census (No. 10), July 3, 1991.

    Science.gov (United States)

    1991-10-01

    Migration statistics from the 10% sampling tabulation of the 1990 Population Census for China reflect intra and inter regional migration patterns between July 1, 1985 and June 30, 1990. Tabulations for 29 provinces provide data on inmigrants, outmigrants, interprovincial net migration, and intraprovincial migration. The provinces with inmigration 1% are Beijing (6.13%), Shanghai, Tianjin, Qinghai, Xinjiang, Hainan, Guangdong, Ningxia, Liaoning, Jiangsu, Inner Mongolia, and Jilin in descending order. The remaining provinces wer 1% with Guangxi the lowest at .37%. Provinces with 1% of out migrants were Qinghai (2.22%), Xinjiang, Hainan, Heilongjiang, Zhejiang, Jilin, Inner Mongolia, Guangxi, Sichuan, Ningxia, Gansu, Beijing, Shanghai, Hebei, and Shaanxi. The lowest of the remaining provinces with migration 1% was Guangdong (.40%). Inmingration outmigration was revealed in the following provinces: Beijing (5%), Shanghai (1%), Tianjin (1%), Guangdong (1%), Liaoning, Ningxia, Xinjiang, Jiangsu, Hainan, Fujian, Shanxi, Qinghai, Hubei, and Shandong. Outmigrants were inmigrants in Guangxi (.92%), Sichuan (.5%), Heilongjiang .5%), Zhejiang (.5%), Gansu, Hunan, Jilin, Anhui, Guizhou, Heibi, Inner Mongolia, Jiangxi, Henan, Yunnan and Shaanxi. Only 2 provinces had intra regional migration between cities and counties 3%: Guangdong (3.99%) and Qinghai. Other intra regional migration which was between 2-3% were Inner Mongolia, Heilongjiang, Fujian, Guangxi, Ningxia, Xinjiang, Sichuan, Jilin, Shaanxi, Liaoning, Yunnanm, Zhejiang, Hubei, and Hunan. Tianjin with the lowest at .29% and the remaining provinces had intramigration 2%.

  6. Fusion Reactor Materials semiannual progress report for period ending September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1992-04-01

    This report contains papers on topic in the following areas of thermonuclear reactor materials: irradiation facilities, test matrices, and experimental methods; dosimetry, damage parameters and activation calculations; materials engineering and design requirements; fundamental mechanical behavior; radiation effects; development of structural alloys; solid breeding materials and beryllium; and ceramics. These paper have been index separately elsewhere. (LSP).

  7. Chemistry and Materials Science progress report, FY 1994. Revision 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-01

    Thrust areas of the weapons-supporting research include surface science, fundamentals of the physics and processing of metals, energetic materials, etc. The laboratory directed R and D include director`s initiatives, individual projects, and transactinium science studies.

  8. Research in mathematics and computer science, March 1, 1991--September 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Pieper, G.W.

    1992-10-01

    This report discusses the following topics in mathematics and computer science at Argonne National Laboratory: Harnessing the Power; Modeling Piezoelectric Crystals; A Two-Way Street; The Challenge Is On; A True Molecular Engineering Capability; CHAMMPions Attack Climate Issues; Studying Vortex Dynamics; Studying Vortex Structure; Providing Reliable and Fast Derivatives; Automating Reasoning for Scientific Problem Solving; Optimization and Mathematical Programming; Scalable Algorithms for Linear Algebra; Reliable Core Software; Computing Phylogenetic Trees; Managing Life-Critical Systems; Interacting with Data through Visualization; New Tools for New Technologies.

  9. Research in mathematics and computer science, March 1, 1991--September 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Pieper, G.W.

    1992-10-01

    This report discusses the following topics in mathematics and computer science at Argonne National Laboratory: Harnessing the Power; Modeling Piezoelectric Crystals; A Two-Way Street; The Challenge Is On; A True Molecular Engineering Capability; CHAMMPions Attack Climate Issues; Studying Vortex Dynamics; Studying Vortex Structure; Providing Reliable and Fast Derivatives; Automating Reasoning for Scientific Problem Solving; Optimization and Mathematical Programming; Scalable Algorithms for Linear Algebra; Reliable Core Software; Computing Phylogenetic Trees; Managing Life-Critical Systems; Interacting with Data through Visualization; New Tools for New Technologies.

  10. Ventures in science Truman College. Final technical report, September 15, 1991--August 14, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Fredrick, W.C.

    1996-08-14

    This is the final report for a Venture in Science program begun in the summer of 1992 for a group of students just finishing the eighth grade, in the greater Chicago area. Students were chosen to participate in the program, and to serve as part of control groups as part of the evaluation of the effectiveness of the program. The program met on Saturdays throughout the school year, and had more extensive activities in the summer. Following almost a two year no-cost extension, students are still involved with each other, and with program teachers on a regular basis, pursuing development of the general program goals.

  11. Pulsed Neutron Powder Diffraction for Materials Science

    Science.gov (United States)

    Kamiyama, T.

    2008-03-01

    The accelerator-based neutron diffraction began in the end of 60's at Tohoku University which was succeeded by the four spallation neutron facilities with proton accelerators at the High Energy Accelerator Research Organization (Japan), Argonne National Laboratory and Los Alamos Laboratory (USA), and Rutherford Appleton Laboratory (UK). Since then, the next generation source has been pursued for 20 years, and 1MW-class spallation neutron sources will be appeared in about three years at the three parts of the world: Japan, UK and USA. The joint proton accelerator project (J-PARC), a collaborative project between KEK and JAEA, is one of them. The aim of the talk is to describe about J-PARC and the neutron diffractometers being installed at the materials and life science facility of J-PARC. The materials and life science facility of J-PARC has 23 neutron beam ports and will start delivering the first neutron beam of 25 Hz from 2008 May. Until now, more than 20 proposals have been reviewed by the review committee, and accepted proposal groups have started to get fund. Those proposals include five polycrystalline diffractometers: a super high resolution powder diffractometer (SHRPD), a 0.2%-resolution powder diffractometer of Ibaraki prefecture (IPD), an engineering diffractometers (Takumi), a high intensity S(Q) diffractometer (VSD), and a high-pressure dedicated diffractometer. SHRPD, Takumi and IPD are being designed and constructed by the joint team of KEK, JAEA and Ibaraki University, whose member are originally from the KEK powder group. These three instruments are expected to start in 2008. VSD is a super high intensity diffractometer with the highest resolution of Δd/d = 0.3%. VSD can measure rapid time-dependent phenomena of crystalline materials as well as glass, liquid and amorphous materials. The pair distribution function will be routinely obtained by the Fourier transiformation of S(Q) data. Q range of VSD will be as wide as 0.01 Å-1industries based on

  12. Longitudinal Nanotechnology Development (1991-2002): National Science Foundation Funding and its Impact on Patents

    Energy Technology Data Exchange (ETDEWEB)

    Huang Zan, E-mail: zhuang@eller.arizona.edu; Chen Hsinchun; Yan Lijun [University of Arizona, Department of Management Information Systems, Artificial Intelligence Lab, Eller College of Management (United States); Roco, Mihail C. [National Science Foundation (United States)

    2005-10-15

    Nanotechnology holds the promise to revolutionize a wide range of products, processes and applications. It is recognized by over sixty countries as critical for their development at the beginning of the 21st century. A significant public investment of over $1 billion annually is devoted to nanotechnology research in the United States. This paper provides an analysis of the National Science Foundation (NSF) funding of nanoscale science and engineering (NSE) and its relationship to the innovation as reflected in the United States Patent and Trade Office (USPTO) patent data. Using a combination of bibliometric analysis and visualization tools, we have identified several general trends, the key players, and the evolution of technology topics in the NSF funding and commercial patenting activities. This study documents the rapid growth of innovation in the field of nanotechnology and its correlation to funding. Statistical analysis shows that the NSF-funded researchers and their patents have higher impact factors than other private and publicly funded reference groups. This suggests the importance of fundamental research on nanotechnology development. The number of cites per NSF-funded inventor is about 10 as compared to 2 for all inventors of NSE-related patents recorded at USPTO, and the corresponding Authority Score is 20 as compared to 1.8.

  13. Confirmation of Anopheles (Anopheles) calderoni Wilkerson, 1991 (Diptera: Culicidae) in Colombia and Ecuador Through Molecular and Morphological Correlation with Topotypic Material

    Science.gov (United States)

    2010-12-01

    nominal species from synonymy with the former. According to Wilkerson (1990, 1991), An. punctimacula is reported from Mexico to northern Colombia and...Illustrated key to the female anopheline mosquitoes of Central America and Mexico . J Am Mosq Control Assoc 6: 7-34. 1Supplementary data An. calderoni...Gómez Plata El Brasil 244 10 May1984 SEM Puerto Nare El Pescado 270 4 Oct 1983 SEM Santafe de Antioquia Paso Real 666 17 Mar 1984 SEM Bolívar Achí

  14. ION BEAM TECHNOLOGY IN MATERIALS SCIENCE

    Directory of Open Access Journals (Sweden)

    M.B. Dutt

    2009-07-01

    Full Text Available Ion beam processing of materials in general and semiconductors in particular, started with ion implantation in semiconductors; first used by Ohl at Bell Labs in 1952 toimprove the electrical characteristics of silicon point contact diodes by implanting H, He, N and Ar ions.The improvement was obvious but it was caused by surface damage and notthe ion implantation. However, in the process, ion implantation had an entry and slowly it became popular among the scientists and the technocrats. Thus, over the last six decades, demands continued for new and improved materials and devices that has pushed ion implanter to expand to ion beam technology. In the semiconductor industry alone, the processes have evolved so much so that in today’s world, there are morethan 4000 ion implanters in the IC fab lines apart from otherion beam-assisted processing machines. Ion beam deposition techniques, ion beam lithography, ion beam etching, ion beammilling are all ion beam beam-assisted techniques that arebeing extensively used in semiconductor industries. In this backdrop, it was thought that a compilation of uses of allthese techniques together with relevant tools of analysis toserve as a guide to the semiconductor scientists and technologists for a glimpse of the ongoing efforts being madein this direction. Fortunately enough, Indian research is not lagging in use of all these modern day technologies that will be evident as the reader will go from one article to the other of this special volume.Defence Science Journal, 2009, 59(4, pp.328-328, DOI:http://dx.doi.org/10.14429/dsj.59.1530

  15. Fusion reactor materials semiannual progress report for the period ending March 31, 1991

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1991-07-01

    This is the tenth in a series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following progress reports: alloy development for irradiation performance; damage analysis and fundamental studies; special purpose materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials program being conducted in support of the Magnetic Fusion Energy Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The Fusion Reactor Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of program participants, and to provide a means of communicating the efforts of materials scientists to the test of the fusion community, both nationally and worldwide.

  16. Chemistry and materials science progress report, FY 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    Research is reported in the areas of surface science, fundamentals of the physics and processing of metals, energetic materials, transactinide materials and properties and other indirectly related areas of weapons research.

  17. Chemistry and materials science progress report, FY 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    Research is reported in the areas of surface science, fundamentals of the physics and processing of metals, energetic materials, transactinide materials and properties and other indirectly related areas of weapons research.

  18. CSIR eNews: Materials science and manufacturing

    CSIR Research Space (South Africa)

    CSIR

    2008-12-01

    Full Text Available knowledge and networks within these fields. A major competitive advantage is the wide coverage of materials (e.g. fibres, textiles, polymers, ceramics, composites, metals) and manufacturing disciplines within one unit. This enables CSIR Materials Science...

  19. CSIR eNews: Materials science and manufacturing

    CSIR Research Space (South Africa)

    CSIR

    2008-03-01

    Full Text Available knowledge and networks within these fields. A major competitive advantage is the wide coverage of materials (e.g. fibres, textiles, polymers, ceramics, composites, metals) and manufacturing disciplines within one unit. This enables CSIR Materials Science...

  20. JPRS Report, Science & Technology, Japan, Bio-Functional Materials.

    Science.gov (United States)

    1990-01-17

    BIO -Functional Materials Selected abstracts on the design, structure, and functions of bio -functional materials; "priority areas of research" sponsored by the Ministry of Education, Science and Culture

  1. FWP executive summaries: basic energy sciences materials sciences and engineering program (SNL/NM).

    Energy Technology Data Exchange (ETDEWEB)

    Samara, George A.; Simmons, Jerry A.

    2006-07-01

    This report presents an Executive Summary of the various elements of the Materials Sciences and Engineering Program which is funded by the Division of Materials Sciences and Engineering, Office of Basic Energy Sciences, U.S. Department of Energy at Sandia National Laboratories, New Mexico. A general programmatic overview is also presented.

  2. The 1991 Lead/Copper Drinking Water Rule and the 1995 Decision Not to Revise the Arsenic Drinking Water Rule: Two Case Studies in EPA's Use of Science

    OpenAIRE

    Powell, Mark

    1996-01-01

    This paper discusses EPA's acquisition and use of science in two decisions under the Safe Drinking Water Act: the 1991 revision of the lead drinking water regulations and the 1995 decision to pursue additional research instead of revising the arsenic in drinking water standard. In the first case, a committed band of policy entrepreneurs within EPA mobilized and supplemented scientific information which had accumulated in the agency's air program to force lead in drinking water up the agency's...

  3. Supporting Data FY 1991 Amended Budget Estimate Submitted to Congress - January 1990: Descriptive Summaries of the Research Development Test and Evaluation Army Appropriation

    Science.gov (United States)

    1990-01-01

    Aircraft Engine Component Improvement Program (CIP) is authorized for all three military Services by DOD Manual 71101 -M. When more than one Service...Date Remarks Test of MCRR 1.0 Software 5-9 Feb 89 5-7 Feb 89 Tests indicated numerous dif- Users Manual (SUM) ferences between SUM and actual screens...pogramn geiment is consastent with the Army’s resource constrained Technolo- gy Base Master Plan anid force modernoization Plans Science and Technology

  4. Materials and Chemical Sciences Division annual report 1989

    Energy Technology Data Exchange (ETDEWEB)

    1990-07-01

    This report describes research conducted at Lawrence Berkeley Laboratories, programs are discussed in the following topics: materials sciences; chemical sciences; fossil energy; energy storage systems; health and environmental sciences; exploratory research and development funds; and work for others. A total of fifty eight programs are briefly presented. References, figures, and tables are included where appropriate with each program.

  5. The Usage of Recycle Materials for Science Practicum: Is There Any Effect on Science Process Skills?

    Science.gov (United States)

    Prajoko, Setiyo; Amin, Mohamad; Rohman, Fatchur; Gipayana, Muhana

    2017-01-01

    This study aimed at determining the effect of recycle materials usage for science practicum on students' basic science process skills of the Open University, Surakarta. Recycle materials are the term used for the obtained materials and equipment from the students' environment by taking back the garbage or secondhand objects into goods or new…

  6. The Cornell/Xerox Commission on Preservation and Access Joint Study in Digital Preservation. Report: Phase 1 (January 1990-December 1991). Digital Capture, Paper Facsimiles, and Network Access.

    Science.gov (United States)

    Kenney, Anne R.; Personius, Lynne K.

    The primary emphasis of this study of the use of digital technology to preserve library materials was the capture of brittle books as digital images and the production of printed paper facsimiles. Of equal interest, however, was the role of digital technology in providing access to library resources, and preliminary work in this area has also been…

  7. PREFACE: Tsukuba International Conference on Materials Science 2013

    Science.gov (United States)

    Kijima, Masashi; Ohshima, Kenichi; Kojima, Seiji; Nagasaki, Yukio; Miyazaki, Shuichi; Kim, Hee Young; Kadowaki, Kazuo; Kashiwagi, Takanari; Nakamura, Junji; Yamamoto, Yohei; Goto, Hiromasa

    2014-03-01

    Tsukuba International Conference on Materials Science (TICMS) was held from 28th August to 6th September, 2013 for the celebration of 40th year anniversary of the University of Tsukuba. The conference was organized by the Division of Materials Science, in cooperation with the Graduate School of Pure and Applied Sciences, and Tsukuba Research Center for Interdisciplinary Materials Science. The purpose of the conference was to provide a unique forum for researchers and students working in various fields of materials science, which have been progressing so rapidly that no single society could cover. The conference consists of following seven workshops to cover various fields. The organizing committee believed that the conference gave all participants new insights into the widespread development of materials science and enhanced the circulation, among them, of information released at the conference. The organizers are grateful for the financial support from University of Tsukuba. This volume contains 25 selected papers from invited and contributed papers, all of which have been screened on the basis of the standard review process of the program committee. The editors express their thanks to those authors who contributed the papers published in this proceedings, which reflects the scientific value of the conference. Nov. 20, 2013 Seiji Kojima, Prof. Dr. Chair, Division of Materials Science Chair, Doctoral Program in Materials Science TICMS 2013 (http://www.ticonfms.tsukuba.ac.jp/) Workshop list The 13th Japan-Korea Joint Workshop on Materials Science Summer School of Biomaterials Science The Japan-Korea Joint Workshop on Shape Memory and Superelastic Technologies The 2nd Workshop on THz Radiation from Intrinsic Josephson Junctions The 3rd German-Japan Nanoworkshop TICMS and IWP Joint Workshop on Conjugated Polymers International Workshop on Science and Patents (IWP) 2013

  8. The materiality of materials and artefacts used in science classrooms

    DEFF Research Database (Denmark)

    Cowie, Bronwen; Otrel-Cass, Kathrin; Moreland, Judy

    and ends of artefacts/ materials. They explored artefacts/materials and how they could be used and through this exemplified materiality in the objects. More deliberate and focused attention to what constitutes materiality can support collaboration and communication to support and enhance learning...... materials as natural objects in this world and artefacts as manmade objects. We are aware that in a classroom material objects and artefacts shape, and are shaped by classroom practice through the way they selectively present scientific explanations. However, materials and artefacts have no intrinsic...... and constrain forms of action and insights that are likely to “emerge” (Wells, 2003). Methods The study's teachers considered that students enjoy and benefit from “hands–on” learning activities and many commented that tasks and interactions incorporated the use of materials. These included material objects...

  9. Exploratory Research and Development Fund, FY 1990

    Energy Technology Data Exchange (ETDEWEB)

    1992-05-01

    The Lawrence Berkeley Laboratory Exploratory R D Fund FY 1990 report is compiled from annual reports submitted by principal investigators following the close of the fiscal year. This report describes the projects supported and summarizes their accomplishments. It constitutes a part of an Exploratory R D Fund (ERF) planning and documentation process that includes an annual planning cycle, projection selection, implementation, and review. The research areas covered in this report are: Accelerator and fusion research; applied science; cell and molecular biology; chemical biodynamics; chemical sciences; earth sciences; engineering; information and computing sciences; materials sciences; nuclear science; physics and research medicine and radiation biophysics.

  10. Materials Centered Science and Manipulative Skill

    Science.gov (United States)

    Struve, Nancy L.; And Others

    1974-01-01

    Evaluated were effects of experience with two physical science units adapted for use by the visually impaired on the manipulative skills of 14 visually impaired low income students from 9 to 19 years of age. (DB)

  11. Materials science: Lessons from tooth enamel

    Science.gov (United States)

    Espinosa, Horacio D.; Soler-Crespo, Rafael

    2017-03-01

    A remarkable composite material has been made that mimics the structure of tooth enamel. This achievement opens up the exploration of new composite materials and of computational methods that reliably predict their properties. See Letter p.95

  12. Materials science: Chemistry and physics happily wed

    Science.gov (United States)

    Fiete, Gregory A.

    2017-07-01

    A major advance in the quantum theory of solids allows materials to be identified whose electronic states have a non-trivial topology. Such materials could have many computing and electronics applications. See Article p.298

  13. High Temperature Materials Laboratory fifth annual report, October 1991--September 1992

    Energy Technology Data Exchange (ETDEWEB)

    Tennery, V.J.; Foust, F.M.

    1992-12-01

    The High Temperature Materials Laboratory (HTML) has completed its fifth year of operation as a designated Department of Energy (DOE) User Facility at the Oak Ridge National Laboratory (ORNL). Growth of the User Program is evidenced by the number of outside institutions executing user agreements since the facility began operation in 1987. A total of 145 nonproprietary agreements (77 university and 68 industry) and 30 proprietary agreements (2 university, 28 industry) are now in effect. Five other government facilities have also participated in the User Program. Thirty-six states are represented by these interactions. Eighty-one nonproprietary research proposals (44 from university, 36 from industry, and 1 other government facility) and six proprietary proposals were considered during this reporting period. Research projects active in FY 1992 are summarized.

  14. Novel thin-film CuInSe{sub 2} fabrication. Annual subcontract report, 1 March 1990--30 April 1991

    Energy Technology Data Exchange (ETDEWEB)

    Mooney, G.D.; Hermann, A.M. [Colorado Univ., Boulder, CO (United States)

    1992-03-01

    This report describes research in Rapid Thermal Processing (RTP), a process that allows the formation of CuInSe{sub 2} without the use of H{sub 2}Se. RTP is a well-established method of rapidly achieving temperatures necessary to melt and recrystallize materials such as Si and and silicides. RTP processes can rapidly and uniformly heat large surface areas to hundreds of degrees Celsius. RTP is the most promising method of rapid recrystallization studied to date, being readily scalable from the research to the production level. The approach to the experiment was divided into two sections: (1) fabricating the precursor film and (2) processing the precursor film. The objective of the first phase of the work was to fabricate the thin films by RTP, then fully characterize them, to demonstrate the viability of the process as a method by which to make device-quality CuInSe{sub 2}. The second phase was to demonstrate that material made by this method could be used to make an active photovoltaic device. 24 refs.

  15. Piezoelectric materials and devices applications in engineering and medical sciences

    CERN Document Server

    Vijaya, M S

    2012-01-01

    Piezoelectric Materials and Devices: Applications in Engineering and Medical Sciences provides a complete overview of piezoelectric materials, covering all aspects of the materials starting from fundamental concepts. The treatment includes physics of piezoelectric materials, their characteristics and applications. The author uses simple language to explain the theory of piezoelectricity and introduce readers to the properties and design of different types of piezoelectric materials, such as those used in engineering and medical device applications.This book: Introduces various types of dielect

  16. Underrepresentation of Girls and Women in Computer Science: Classification of 1990s Research.

    Science.gov (United States)

    Dryburgh, Heather

    2000-01-01

    Discusses the decline in the number of female computer science graduates and presents a categorization by educational stages of the research into this decline as well as an evaluation of the generalizability of findings to broader contexts. Show that the most extensive research is done at the post-secondary stage. (Contains 53 references.)…

  17. The matilda effect in science: awards and prizes in the US, 1990s and 2000s.

    Science.gov (United States)

    Lincoln, Anne E; Pincus, Stephanie; Koster, Janet Bandows; Leboy, Phoebe S

    2012-04-01

    Science is stratified, with an unequal distribution of research facilities and rewards among scientists. Awards and prizes, which are critical for shaping scientific career trajectories, play a role in this stratification when they differentially enhance the status of scientists who already have large reputations: the 'Matthew Effect'. Contrary to the Mertonian norm of universalism--the expectation that the personal attributes of scientists do not affect evaluations of their scientific claims and contributions--in practice, a great deal of evidence suggests that the scientific efforts and achievements of women do not receive the same recognition as do those of men: the 'Matilda Effect'. Awards in science, technology, engineering and medical (STEM) fields are not immune to these biases. We outline the research on gender bias in evaluations of research and analyze data from 13 STEM disciplinary societies. While women's receipt of professional awards and prizes has increased in the past two decades, men continue to win a higher proportion of awards for scholarly research than expected based on their representation in the nomination pool. The results support the powerful twin influences of implicit bias and committee chairs as contributing factors. The analysis sheds light on the relationship of external social factors to women's science careers and helps to explain why women are severely underrepresented as winners of science awards. The ghettoization of women's accomplishments into a category of 'women-only' awards also is discussed.

  18. German Influences on the Spanish Academic Discourse in Educational Sciences between 1945 and 1990

    Science.gov (United States)

    Roith, Christian

    2008-01-01

    The idiosyncrasy of national academic discourses in educational sciences and the flow of ideas between them is a topic that has inspired recent research, even though it has not been treated very exhaustively. This study presents some results of an investigation into German influences on the Spanish academic discourse in educational sciences…

  19. Assessment of the National Science Foundation's 1988-1990 Undergraduate Faculty Enhancement Program. Final Report.

    Science.gov (United States)

    Westat, Inc., Rockville, MD.

    The National Science Foundation's Undergraduate Faculty Enhancement Program (UFEP) awards grants on a competitive basis to project directors at colleges and universities, professional societies, industry, and other qualified organizations to conduct regional or national seminars, short courses, workshops, conferences, or similar activities for…

  20. Underrepresentation of Girls and Women in Computer Science: Classification of 1990s Research.

    Science.gov (United States)

    Dryburgh, Heather

    2000-01-01

    Discusses the decline in the number of female computer science graduates and presents a categorization by educational stages of the research into this decline as well as an evaluation of the generalizability of findings to broader contexts. Show that the most extensive research is done at the post-secondary stage. (Contains 53 references.)…

  1. The use of historical materials in elementary science classrooms

    Science.gov (United States)

    Kafai, Yasmin B.; Gilliland-Swetland, Anne J.

    2001-07-01

    Science educators have stressed in recent years the importance of providing students with an historical understanding of the development of scientific knowledge. Although many approaches have been suggested for building historical understanding of science, historical source materials have often been deemed too difficult to use with elementary school students. This article reports on a case study that used archival and contemporary source materials in project activities, such as photographs and field notes, to engage students in the processes of data generation, selection, annotation, and evaluation. The curricular science activities of one elementary classroom with 29 fourth and fifth grade students are decribed and analyzed as they build and use archives of historical and contemporary naturalist materials. The article concludes with a discussion of the feasibility and benefits of using historical source materials within elementary science education, as well as the implications for selecting and preparing historical source materials in digital format for use in elementary education.

  2. Polycrystalline thin film materials and devices. Annual subcontract report, 16 January 1991--15 January 1992

    Energy Technology Data Exchange (ETDEWEB)

    Baron, B.N.; Birkmire, R.W.; Phillips, J.E.; Shafarman, W.N.; Hegedus, S.S.; McCandless, B.E. [Delaware Univ., Newark, DE (United States). Inst. of Energy Conversion

    1992-10-01

    Results of Phase II of a research program on polycrystalline thin film heterojunction solar cells are presented. Relations between processing, materials properties and device performance were studied. The analysis of these solar cells explains how minority carrier recombination at the interface and at grain boundaries can be reduced by doping of windows and absorber layers, such as in high efficiency CdTe and CuInSe{sub 2} based solar cells. The additional geometric dimension introduced by the polycrystallinity must be taken into consideration. The solar cells are limited by the diode current, caused by recombination in the space charge region. J-V characteristics of CuInSe{sub 2}/(CdZn)S cells were analyzed. Current-voltage and spectral response measurements were also made on high efficiency CdTe/CdS thin film solar cells prepared by vacuum evaporation. Cu-In bilayers were reacted with Se and H{sub 2}Se gas to form CuInSe{sub 2} films; the reaction pathways and the precursor were studied. Several approaches to fabrication of these thin film solar cells in a superstrate configuration were explored. A self-consistent picture of the effects of processing on the evolution of CdTe cells was developed.

  3. Making Audio-Visual Teaching Materials for Elementary Science

    OpenAIRE

    永田, 四郎

    1980-01-01

    For the elementary science, some audio-visual teaching materials were made by author and our students. These materials are slides for projector, transparencies and materials for OHP, 8 mm sound films and video tapes. We hope this kind of study will continue.

  4. Diamond detector - material science, design and application

    Science.gov (United States)

    Gaowei, Mengjia

    Modern synchrotrons, such as the NSLS-II, will enable unprecedented science by having extremely high brightness and flux with exceptional beam stability. These capabilities create a harsh and demanding environment for measuring the characteristics of the x-ray beam. In many cases, existing measurement techniques fail completely, requiring the development of new detectors which can meet the demands of the synchrotron. The combination of diamond properties ranked diamond an appealing candidate in the field of radiation detection in extreme conditions and it has been used as x-ray sensor material for decades. However, only until the development of chemical vapor deposition (CVD) process in the synthesis of diamond that has it been considered for wider applications in the state-of-art synchrotron light sources as part of beamline diagnostics, including the detection of x-ray beam flux and position. While defects and dislocations in CVD grown single crystal diamonds are inevitable, there are solutions in other aspects of a device fabrication to compensate this technological downside, including improving device performance in engineering diamond surface electrode materials and patterns and slicing and polishing diamond plates into thinner pieces. The content of this dissertation summarizes our effort in addressing several problems we encounter in the process of design and fabrication of single crystal CVD diamond based electronic devices. In order to study the generation of post-anneal photoconductive gain in our devices we have discussed in section 3 and 4 the two criteria for the observation of photoconductive current. In section 3 we reveal the correlation between structural defects in diamond and the post-anneal photoconductive regions. Section 4 introduces the measurements of hard x-ray photoelectron spectroscopy (HAXPES) we applied to investigate the diamond-metal Schottky barrier height for several metals and diamond surface terminations. The position of the

  5. 2003 research briefs : Materials and Process Sciences Center.

    Energy Technology Data Exchange (ETDEWEB)

    Cieslak, Michael J.

    2003-08-01

    This report is the latest in a continuing series that highlights the recent technical accomplishments associated with the work being performed within the Materials and Process Sciences Center. Our research and development activities primarily address the materials-engineering needs of Sandia's Nuclear-Weapons (NW) program. In addition, we have significant efforts that support programs managed by the other laboratory business units. Our wide range of activities occurs within six thematic areas: Materials Aging and Reliability, Scientifically Engineered Materials, Materials Processing, Materials Characterization, Materials for Microsystems and Materials Modeling and Computational Simulation. We believe these highlights collectively demonstrate the importance that a strong materials-science base has on the ultimate success of the NW program and the overall DOE technology portfolio.

  6. 2004 research briefs :Materials and Process Sciences Center.

    Energy Technology Data Exchange (ETDEWEB)

    Cieslak, Michael J.

    2004-01-01

    This report is the latest in a continuing series that highlights the recent technical accomplishments associated with the work being performed within the Materials and Process Sciences Center. Our research and development activities primarily address the materials-engineering needs of Sandia's Nuclear-Weapons (NW) program. In addition, we have significant efforts that support programs managed by the other laboratory business units. Our wide range of activities occurs within six thematic areas: Materials Aging and Reliability, Scientifically Engineered Materials, Materials Processing, Materials Characterization, Materials for Microsystems, and Materials Modeling and Simulation. We believe these highlights collectively demonstrate the importance that a strong materials-science base has on the ultimate success of the NW program and the overall DOE technology portfolio.

  7. 2005 Research Briefs : Materials and Process Sciences Center.

    Energy Technology Data Exchange (ETDEWEB)

    Cieslak, Michael J.

    2005-05-01

    This report is the latest in a continuing series that highlights the recent technical accomplishments associated with the work being performed within the Materials and Process Sciences Center. Our research and development activities primarily address the materials-engineering needs of Sandia's Nuclear-Weapons (NW) program. In addition, we have significant efforts that support programs managed by the other laboratory business units. Our wide range of activities occurs within six thematic areas: Materials Aging and Reliability, Scientifically Engineered Materials, Materials Processing, Materials Characterization, Materials for Microsystems, and Materials Modeling and Simulation. We believe these highlights collectively demonstrate the importance that a strong materials-science base has on the ultimate success of the NW program and the overall DOE technology portfolio.

  8. Preservice Elementary Teachers' Adaptation of Science Curriculum Materials for Inquiry-Based Elementary Science

    Science.gov (United States)

    Forbes, Cory T.

    2011-01-01

    Curriculum materials are important resources with which teachers make pedagogical decisions about the design of science learning environments. To become well-started beginning elementary teachers capable of engaging their students in inquiry-based science, preservice elementary teachers need to learn to use science curriculum materials…

  9. Materials science for solar energy conversion systems

    CERN Document Server

    Granqvist, CG

    1991-01-01

    Rapid advances in materials technology are creating many novel forms of coatings for energy efficient applications in solar energy. Insulating heat mirrors, selective absorbers, transparent insulation and fluorescent concentrators are already available commercially. Radiative cooling, electrochromic windows and polymeric light pipes hold promise for future development, while chemical and photochemical processes are being considered for energy storage. This book investigates new material advances as well as applications, costs, reliability and industrial production of existing materials. Each c

  10. Biological issues in materials science and engineering: Interdisciplinarity and the bio-materials paradigm

    Science.gov (United States)

    Murr, L. E.

    2006-07-01

    Biological systems and processes have had, and continue to have, important implications and applications in materials extraction, processing, and performance. This paper illustrates some interdisciplinary, biological issues in materials science and engineering. These include metal extraction involving bacterial catalysis, galvanic couples, bacterial-assisted corrosion and degradation of materials, biosorption and bioremediation of toxic and other heavy metals, metal and material implants and prostheses and related dental and medical biomaterials developments and applications, nanomaterials health benefits and toxicity issue, and biomimetics and biologically inspired materials developments. These and other examples provide compelling evidence and arguments for emphasizing biological sicences in materials science and engineering curricula and the implementation of a bio-materials paradigm to facilitate the emergence of innovative interdisciplinarity involving the biological sciences and materials sciences and engineering.

  11. Comparative toxicity of strontium-90 and radium-226 in beagle dogs. Progress report of second year, December 16, 1990--December 15, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Raabe, O.G.; Culbertson, M.R.; White, R.G.; Spangler, W.L.; Cain, G.R.; Parks, N.J.; Samuels, S.J.

    1991-12-01

    We are completing a 30-year study of the biological effects of {sup 90}Sr and {sup 226}Ra in the beagle in order to predict the possible long-term hazards to people from chronic exposure to low levels of irradiation. Animals received either radionuclide by several means of administration: (a) continual ingestion of {sup 90}Sr, (b) a single intravenous injection of {sup 90}Sr, or (c) a series of eight intravenous injections of {sup 226}Ra. Although administration of {sup 90}Sr and {sup 226}Ra ended at 540 days of age, the animals continued to receive chronic, low-level radiation doses from these bone-seeking radionuclides throughout life. This project is the largest single cohort study in beagles of internally deposited radionuclides. It is unique in use of the ingestion route for {sup 90}Sr and in exposure that began before birth and continued throughout development to adulthood with uniform labeling of the skeletons with {sup 90}Sr. The last of the dogs died in 1986 at age 18.5 years, but we are continuing to investigate the significance of these long-term exposures given at low dose rates with regard to cancer production, physiologic well-being, and shortening of life through the detailed records that were kept and by study of preserved materials. All the data have been successfully accumulated and entered into a main-frame computer data base management system. Current work is exclusively directed at preparing research papers summarizing the results and the associated biostatistical and survival analyses. 15 refs., 1 fig., 4 tabs.

  12. Comparative toxicity of strontium-90 and radium-226 in beagle dogs. Report of second year, December 16, 1990--December 15, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Raabe, O.G.; Culbertson, M.R.; White, R.G.; Spangler, W.L.; Cain, G.R.; Parks, N.J.; Samuels, S.J.

    1991-12-31

    The authors are completing a 30-year study of the biological effects of {sup 90}Sr and {sup 226}Ra in the beagle in order to predict the possible long-term hazards to people from chronic exposure to low levels of irradiation. Animals received either radionuclide by several means of administration: (a) continual ingestion of {sup 90}Sr, (b) a single intravenous injection of {sup 90}Sr, or (c) a series of eight intravenous injections of {sup 226}Ra. Although administration of {sup 90}Sr and {sup 226}Ra ended at 540 days of age, the animals continued to receive chronic, low-level radiation doses from these bone-seeking radionuclides throughout life. This project is the largest single cohort study in beagles of internally deposited radionuclides. It is unique in use of the ingestion route for {sup 90}Sr and in exposures that began before birth and continued throughout development to adulthood with uniform labeling of the skeletons with {sup 90}Sr. The last of the dogs died in 1986 at age 18.5 years, but the authors are continuing to investigate the significance of these long-term exposures given at low dose rates with regard to cancer production, physiologic well-being, and shortening of life through the detailed records that were kept and by study of preserved materials. All the data have been successfully accumulated and entered into a main-frame computer data base management system. Current work is exclusively directed at preparing research papers summarizing the results and the associated biostatistical and survival analyses.

  13. Materials Science Experiment Module Accommodation within the Materials Science Research Rack (MSRR-1) on the International Space Station (ISS)

    Science.gov (United States)

    Higgins, D. B.; Jayroe, R. R.; McCarley, K. S.

    2000-01-01

    The Materials Science Research Rack I (MSRR-1) of the Materials Science Research Facility (MSRF) is a modular facility designed to accommodate two Experiment Modules (EM) simultaneously on board the International Space Station (ISS). One of these EMs will be the NASA/ESA EM being, developed collaboratively by NASA and the European Space Agency. The other EM position will be occupied by various multi-user EMs that will be exchanged in-orbit to accommodate a variety of materials science investigations. This paper discusses the resources, services, and allocations available to the EMs and briefly describes performance capabilities of the EMs currently planned for flight.

  14. First Materials Science Research Rack Capabilities and Design Features

    Science.gov (United States)

    Schaefer, D.; King, R.; Cobb, S.; Whitaker, Ann F. (Technical Monitor)

    2001-01-01

    The first Materials Science Research Rack (MSRR-1) will accommodate dual Experiment Modules (EM's) and provide simultaneous on-orbit processing operations capability. The first international Materials Science Experiment Module for the MSRR-1 is an international cooperative research activity between NASA's Marshall Space Flight Center (MSFC) and the European Space Agency's (ESA) European Space Research and Technology Center. (ESTEC). This International Standard Payload Rack (ISPR) will contain the Materials Science Laboratory (MSL) developed by ESA as an Experiment Module. The MSL Experiment Module will accommodate several on-orbit exchangeable experiment-specific Module Inserts. Module Inserts currently planned are a Quench Module Insert, Low Gradient Furnace, Solidification with Quench Furnace, and Diffusion Module Insert. The second Experiment Module for the MSRR-1 configuration is a commercial device supplied by MSFC's Space Products Department (SPD). It includes capabilities for vapor transport processes and liquid metal sintering. This Experiment Module will be replaced on-orbit with other NASA Materials Science EMs.

  15. The materiality of materials and artefacts used in science classrooms

    DEFF Research Database (Denmark)

    Cowie, Bronwen; Otrel-Cass, Kathrin; Moreland, Judy

    materials as natural objects in this world and artefacts as manmade objects. We are aware that in a classroom material objects and artefacts shape, and are shaped by classroom practice through the way they selectively present scientific explanations. However, materials and artefacts have no intrinsic...... such as fossils, plant samples and artefacts like test tubes, worksheets and digital tools along with written inscriptions produced during interactions and that served as artefacts in subsequent interactions (Roehl, 2012). Data sources Data were generated via classroom observation using video, student work sample....... d) Artefacts as an adjunct to talk. The use of sets of cards or actual objects. Students changed the position of the cards/ objects as a dynamic visual representation of consensus thinking. Significance The teachers in our study did not view materials as being neutral objects but thought about means...

  16. Materials science. Materials that couple sensing, actuation, computation, and communication.

    Science.gov (United States)

    McEvoy, M A; Correll, N

    2015-03-20

    Tightly integrating sensing, actuation, and computation into composites could enable a new generation of truly smart material systems that can change their appearance and shape autonomously. Applications for such materials include airfoils that change their aerodynamic profile, vehicles with camouflage abilities, bridges that detect and repair damage, or robotic skins and prosthetics with a realistic sense of touch. Although integrating sensors and actuators into composites is becoming increasingly common, the opportunities afforded by embedded computation have only been marginally explored. Here, the key challenge is the gap between the continuous physics of materials and the discrete mathematics of computation. Bridging this gap requires a fundamental understanding of the constituents of such robotic materials and the distributed algorithms and controls that make these structures smart.

  17. Applied solid state science advances in materials and device research

    CERN Document Server

    Wolfe, Raymond

    2013-01-01

    Applied Solid State Science: Advances in Materials and Device Research, Volume 4 covers articles on single crystal compound semiconductors and complex polycrystalline materials. The book discusses narrow gap semiconductors and solid state batteries. The text then describes the advantages of hot-pressed microcrystalline compacts of oxygen-octahedra ferroelectrics over single crystal materials, as well as heterostructure junction lasers. Solid state physicists, materials scientists, electrical engineers, and graduate students studying the subjects being discussed will find the book invaluable.

  18. Surface physics of materials materials science and technology

    CERN Document Server

    Blakely, J M

    2013-01-01

    Surface Physics of Materials presents accounts of the physical properties of solid surfaces. The book contains selected articles that deal with research emphasizing surface properties rather than experimental techniques in the field of surface physics. Topics discussed include transport of matter at surfaces; interaction of atoms and molecules with surfaces; chemical analysis of surfaces; and adhesion and friction. Research workers, teachers and graduate students in surface physics, and materials scientist will find the book highly useful.

  19. Materials science: Nanomagnets boost thermoelectric output

    Science.gov (United States)

    Boona, Stephen R.

    2017-09-01

    The direct conversion of heat into electricity -- a reversible process known as the thermoelectric effect -- can be greatly enhanced in some materials by embedding them with a small number of magnetic nanoparticles. See Letter p.247

  20. Critical materialism: science, technology, and environmental sustainability.

    Science.gov (United States)

    York, Richard; Clark, Brett

    2010-01-01

    There are widely divergent views on how science and technology are connected to environmental problems. A view commonly held among natural scientists and policy makers is that environmental problems are primarily technical problems that can be solved via the development and implementation of technological innovations. This technologically optimistic view tends to ignore power relationships in society and the political-economic order that drives environmental degradation. An opposed view, common among postmodernist and poststructuralist scholars, is that the emergence of the scientific worldview is one of the fundamental causes of human oppression. This postmodernist view rejects scientific epistemology and often is associated with an anti-realist stance, which ultimately serves to deny the reality of environmental problems, thus (unintentionally) abetting right-wing efforts to scuttle environmental protection. We argue that both the technologically optimistic and the postmodernist views are misguided, and both undermine our ability to address environmental crises. We advocate the adoption of a critical materialist stance, which recognizes the importance of natural science for helping us to understand the world while also recognizing the social embeddedness of the scientific establishment and the need to challenge the manipulation of science by the elite.

  1. Materials science: Like cartilage, but simpler

    DEFF Research Database (Denmark)

    Skov, Anne Ladegaard

    2015-01-01

    The properties of articular cartilage, which lines bones in joints, depend partlyon repulsion between components of the material. A new synthetic gel that mimics this feature has rare, direction-dependent properties.......The properties of articular cartilage, which lines bones in joints, depend partlyon repulsion between components of the material. A new synthetic gel that mimics this feature has rare, direction-dependent properties....

  2. A strategy for space biology and medical science for the 1980s and 1990s

    Science.gov (United States)

    1987-01-01

    A guideline is provided for developing NASA's long-term mission plans and a rational, coherent research program. Ten topical areas for research are addressed: developmental biology, gravitropism in plants, sensorimotor integration, bone and mineral metabolism, cardiovascular/pulmonary function, muscle remodeling, nutrition, human reproduction, space anemia, and human behavior. Scientific goals, objectives, and required measurements and facilities for each of the major areas of space biology and medicine are identified and described along with primary goals and objectives for each of these disciplines. Proposals are made concerning the use of scientific panels to oversee the implementation of the strategy, life sciences' need for continuous access to spaceflight opportunities, the advantages of a focused mission strategy, certain design features that will enhance spaceflight experimentation, and general facilities. Other topics that are considered include mission planning, crew selection and training, and interagency and international cooperation.

  3. Fusion reactor materials semiannual progress report for the period ending March 31, 1990

    Energy Technology Data Exchange (ETDEWEB)

    1990-08-01

    This report mainly discusses topics on the physical effects of radiation on thermonuclear reactor materials. The areas discussed are: irradiation facilities, test matrices, and experimental methods; dosimetry, damage parameters, and activation calculations; fundamental mechanical behavior; radiation effects; mechanistic studies, theory and modeling; development of structural alloys; solid breeding materials; and ceramics. (FI)

  4. Using Federally Funded Curricular Materials to meet Next Geneartion Science Standards in Earth System Science

    Science.gov (United States)

    McAuliffe, C.

    2015-12-01

    The Next Generation Science Standards (NGSS) describe teaching and learning goals for Earth system science at all levels of K-12, including elementary, middle school, and high school. Teachers must consider science and engineering practices, cross-cutting concepts, and disciplinary core ideas. The National Science Foundation and other federal organizations have supported the development of reformed curricular materials at the K-12 level for many years. Although developed before the adoption of NGSS, many of these Earth system science resources are, in fact, NGSS congruent. Such resources include those developed by TERC, SERC, EDC, NASA, NOAA, USGS, and others. This session features NGSS congruent materials, carefully examining and dissecting the performance expectations that embody these materials. It also shares a process of tagging these materials via NSTA's, NGSS portal guidelines.

  5. MateriApps — a Portal Site of Materials Science Simulation

    Science.gov (United States)

    Konishi, Yusuke; Igarashi, Ryo; Kasamatsu, Shusuke; Kato, Takeo; Kawashima, Naoki; Kawatsu, Tsutomu; Kouta, Hikaru; Noda, Masashi; Sasaki, Shoichi; Terada, Yayoi; Todo, Synge; Tsuchida, Shigehiro; Yoshimi, Kazuyoshi; Yoshizawa, Kanako

    "MateriApps" is a portal website of computational materials science simulation that has a database containing over 100 application software including density functional theory calculation, quantum chemistry, molecular dynamics, etc. On the MateriApps website, researchers can find applications suitable for their own research in materials science by browsing the website or searching by keywords. We also provide forums and tutorial courses of applications. In order to avoid troublesome installation procedures and provide users an environment in which they can try out various applications easily, we develop and freely distribute "MateriApps LIVE!," a live Linux system, in which several applications introduced in MateriApps are pre-installed.

  6. Understanding structural conservation through materials science:

    DEFF Research Database (Denmark)

    Fuster-López, Laura; Krarup Andersen, Cecil

    2014-01-01

    Mechanical properties and the structure of materials are key elements in understanding how structural interventions in conservation treatments affect cultural heritage objects. In this context, engineering mechanics can help determine the strength and stability found in art objects as it can...... with tools to avoid future problems, it should be present in all conservation-restoration training programs to help promote students’ understanding of the degradation mechanisms in cultural materials (and their correlation with chemical and biological degradation) as well as the implications behind...

  7. Fusion reactor materials semiannual progress report for period ending September 30, 1990

    Energy Technology Data Exchange (ETDEWEB)

    1991-04-01

    This is the ninth in series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following technical progress reports: Alloy Development of Irradiation Performance; Damage Analysis and Fundamental Studies; and Special Purpose Materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials program being conducted in support of the Magnetic Fusion Energy Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The Fusion Reactor Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide.

  8. AGS experiments: 1990, 1991, 1992. Ninth edition

    Energy Technology Data Exchange (ETDEWEB)

    Depken, J.C.

    1993-04-01

    This report contains a description of the following: AGS Experimental Area - High Energy Physics FY 1993 and Heavy Ion Physics FY 1993; Table of Beam Parameters and Fluxes; Experiment Schedule ``as run``; Proposed 1993 Schedule; A listing of experiments by number; Two-page summaries of each experiment begin here, also ordered by number; Publications of AGS Experiments; and List of AGS Experimenters.

  9. Materials science: Crystals aligned through graphene

    Science.gov (United States)

    Lee, Minjoo Larry

    2017-04-01

    Graphene has been used as a 'transparent' layer that allows single crystals of a material to be grown on a substrate, and then lifted off -- in much the same way that baking paper lets cakes be removed easily from tins. See Letter p.340

  10. The science and engineering of materials

    Energy Technology Data Exchange (ETDEWEB)

    Askeland, D.R.

    1985-01-01

    The book includes contents from atomic and crystal structure through strengthening mechanisms to service behaviour and failure analysis. The range of materials studied include metals, alloys, ceramics, polymers, and composites-is truly catholic. Properties covered include mechanical (creep, hardness, brittle, failure, etc.), electrical (dielectric and magnetic), optical, thermal, and elastic.

  11. Understanding structural conservation through materials science:

    DEFF Research Database (Denmark)

    Fuster-López, Laura; Krarup Andersen, Cecil

    2014-01-01

    with tools to avoid future problems, it should be present in all conservation-restoration training programs to help promote students’ understanding of the degradation mechanisms in cultural materials (and their correlation with chemical and biological degradation) as well as the implications behind...

  12. Understanding solids: the science of materials

    CERN Document Server

    Tilley, Richard J. D.

    2013-01-01

    This edition contains new sections on the use of computing methods to solve materials problems and has been thoroughly updated to include the many developments and advances made in the past 10 years, e.g.  batteries, solar cells, lighting technology, laser...

  13. Computer information resources of inorganic chemistry and materials science

    Energy Technology Data Exchange (ETDEWEB)

    Kiselyova, N N; Dudarev, V A; Zemskov, V S [A.A.Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, Moscow (Russian Federation)

    2010-02-28

    Information systems used in inorganic chemistry and materials science are considered. The following basic trends in the development of modern information systems in these areas are highlighted: access to information via the Internet, merging of documental and factual databases, involvement of experts in the evaluation of the data reliability, supplementing databases with information analysis tools on the properties of inorganic substances and materials.

  14. Preservice Elementary Teachers' Critique of Instructional Materials for Science

    Science.gov (United States)

    Davis, Elizabeth A.

    2006-01-01

    Science teachers must adapt curriculum materials, so preservice teachers must develop beginning proficiency with this authentic task of teaching. What criteria do they use when they critique these materials in preparation for adapting them, when they develop the criteria themselves and when they are given a set of criteria from which to choose?…

  15. Lunar and Planetary Science Conference, 21st, Houston, TX, Mar. 12-16, 1990, Proceedings

    Science.gov (United States)

    Ryder, Graham (Editor); Sharpton, Virgil L. (Editor)

    1991-01-01

    The present conference on lunar and planetary science discusses the geology and geophysics of Venus; the lunar highlands and regolith; magmatic processes of the moon and meteorites; remote sensing of the moon and Mars; chondrites, cosmic dust, and comets; ammonia-water mixtures; and the evolution of volcanism, tectonics, and volatiles on Mars. Attention is given to volcanism on Venus, pristine moon rocks, the search for Crisium Basin ejecta, Apollo 14 glasses, lunar anorthosites, the sources of mineral fragments in impact melts 15445 and 15455, and argon adsorption in the lunar atmosphere. Also discussed are high-pressure experiments on magnesian eucrite compositions, the early results of thermal diffusion in metal-sulfide liquids, preliminary results of imaging spectroscopy of the Humorum Basin region of the moon, high-resolution UV-visible spectroscopy of lunar red spots, and a radar-echo model for Mars. Other topics addressed include nitrogen isotopic signatures in the Acapulco Meteorite, tridymite and maghemite formation in an Fe-SiO smoke, and the enigma of mottled terrain on Mars.

  16. International Conference on Recent Trends in Materials Science and Applications

    CERN Document Server

    2017-01-01

    This book gathers the proceedings of the plenary sessions, invited lectures, and papers presented at the International Conference on Recent Trends in Materials Science and Applications (ICRTMSA-2016). It also features revealing presentations on various aspects of Materials Science, such as nanomaterials, photonic crystal fibers, quantum dots, thin film techniques, crystal growth, spectroscopic procedures, fabrication and characterisation of new materials / compounds with enhanced features, and potential applications in nonlinear optical and electro-optic devices, solar cell device, chemical sensing, biomedical imaging, diagnosis and treatment of cancer, energy storage device etc. This book will be of great interest to beginning and seasoned researchers alike.

  17. Application of nuclear-physics methods in space materials science

    Science.gov (United States)

    Novikov, L. S.; Voronina, E. N.; Galanina, L. I.; Chirskaya, N. P.

    2017-07-01

    The brief history of the development of investigations at the Skobeltsyn Institute of Nuclear Physics, Moscow State University (SINP MSU) in the field of space materials science is outlined. A generalized scheme of a numerical simulation of the radiation impact on spacecraft materials and elements of spacecraft equipment is examined. The results obtained by solving some of the most important problems that modern space materials science should address in studying nuclear processes, the interaction of charged particles with matter, particle detection, the protection from ionizing radiation, and the impact of particles on nanostructures and nanomaterials are presented.

  18. FWP executive summaries, Basic Energy Sciences Materials Sciences Programs (SNL/NM)

    Energy Technology Data Exchange (ETDEWEB)

    Samara, G.A.

    1997-05-01

    The BES Materials Sciences Program has the central theme of Scientifically Tailored Materials. The major objective of this program is to combine Sandia`s expertise and capabilities in the areas of solid state sciences, advanced atomic-level diagnostics and materials synthesis and processing science to produce new classes of tailored materials as well as to enhance the properties of existing materials for US energy applications and for critical defense needs. Current core research in this program includes the physics and chemistry of ceramics synthesis and processing, the use of energetic particles for the synthesis and study of materials, tailored surfaces and interfaces for materials applications, chemical vapor deposition sciences, artificially-structured semiconductor materials science, advanced growth techniques for improved semiconductor structures, transport in unconventional solids, atomic-level science of interfacial adhesion, high-temperature superconductors, and the synthesis and processing of nano-size clusters for energy applications. In addition, the program includes the following three smaller efforts initiated in the past two years: (1) Wetting and Flow of Liquid Metals and Amorphous Ceramics at Solid Interfaces, (2) Field-Structured Anisotropic Composites, and (3) Composition-Modulated Semiconductor Structures for Photovoltaic and Optical Technologies. The latter is a joint effort with the National Renewable Energy Laboratory. Separate summaries are given of individual research areas.

  19. Learning about materials science and technology by deconstructing modern products

    DEFF Research Database (Denmark)

    Horsewell, Andy

    Get the attention of young engineering students, interest and inspire them. Encourage them to think about materials science and technology by looking at the consumer products and gadgets that interest them. Analyse what modern products are constructed of, and how and why the materials...... and the processes have been chosen in their manufacture i.e. deconstruct modern products. Suitable items can easily be found in personal communication and entertainment, including all manner of sports goods. Further, the current pace of materials product development ensures that using these objects to focus...... teaching encourages and demands constant modernisation of the course and the materials being presented. A consideration of material and process selection for components in a modern product can be a dynamic starting point for a course on materials science and engineering; providing inspiration and showing...

  20. Understanding Materials Science History · Properties · Applications

    CERN Document Server

    Hummel, Rolf E

    2005-01-01

    This introduction to materials science both for students of engineering and physics and for the interested general public examines not only the physical and engineering properties of virtually all kinds of materials, but also their history, uses, development, and some of the implications of resource depletion and recycling. It covers all topics on materials from an entirely novel perspective: the role materials have played throughout history in the development of humankind and technologies. Specifically, it shows the connection between the technical and the cultural, economic, ecological, and societal aspects of materials science. It aims to whet the appetite of its readers and inspire them to further explore the properties and applications of metals, alloys, ceramics, plastics, and electronic materials by presenting easily understandable explanations and entertaining historical facts. It is also intended to raise the reader’s awareness of their obligations to society as practicing engineers and scientists....

  1. Nutrition Education Printed Materials and Audiovisuals: Grades 7-12, January 1979-May 1990. Quick Bibliography Series: QB 90-80.

    Science.gov (United States)

    Evans, Shirley King

    This annotated bibliography contains 203 citations from AGRICOLA, the U.S. Department of Agriculture database, dating from January 1979 through May 1990. The bibliography cites books, print materials, and audiovisual materials on the subject of nutrition education for grades 7-12. Each citation contains complete bibliographic information,…

  2. Chemistry and Materials Science 2004 Annual Report, Preview Edition

    Energy Technology Data Exchange (ETDEWEB)

    Shang, S; Diaz de la Rubia, T; Rennie, G

    2005-05-16

    Thriving from change is a constant element at LLNL. Through our commitment to scientific accomplishments, we have met the challenges posed by our evolving missions in 2004. It is the scientific breakthroughs that substantiate our strategic directions. Investments based on our strategic directions are bearing fruit, as illustrated in this preview of the 2004 Annual Report. We describe how our science is built around a strategic plan with four organizing themes: {sm_bullet} Materials properties and performance under extreme conditions {sm_bullet} Chemistry under extreme conditions and chemical engineering in support of national-security programs {sm_bullet} Science supporting national objectives at the intersection of chemistry, materials science, and biology {sm_bullet} Applied nuclear science for human health and national security We are particularly pleased with achievements within the 'intersection of chemistry, materials science, and biology,' an emerging area of science that may reshape the landscape of our national-security mission. CMS continues to have an unambiguous role both as a technology leader and as a partner for all of the four theme areas. We look forward to expanding the frontiers of science and continuing our partnership with the worldwide scientific community, as we firmly respond to the changing environment with agility and flexibility.

  3. Addgene: making materials sharing "science as usual".

    Directory of Open Access Journals (Sweden)

    Joanne Kamens

    2014-11-01

    Full Text Available Addgene (www.addgene.org is a nonprofit organization that facilitates biomedical research and discovery by improving access to useful research materials and information. To fulfill this mission, Addgene works with hundreds of laboratories all over the world to collect high-quality published plasmids and data for the repository that can then be distributed to academic institutions and used to further research. Biological resource centers such as Addgene are an important part of the scientific infrastructure. They play a key role in helping scientists overcome logistical barriers to sharing, improving experimental reproducibility, and optimizing use of limited resources.

  4. Analytical Chemistry at the Interface Between Materials Science and Biology

    Energy Technology Data Exchange (ETDEWEB)

    O' Brien, Janese C. [Iowa State Univ., Ames, IA (United States)

    2000-09-21

    Likedlessentid sciences, anal~cd chetis~continues toreinvent itself. Moving beyond its traditional roles of identification and quantification, analytical chemistry is now expanding its frontiers into areas previously reserved to other disciplines. This work describes several research efforts that lie at the new interfaces between analytical chemistry and two of these disciplines, namely materials science and biology. In the materials science realm, the search for new materials that may have useful or unique chromatographic properties motivated the synthesis and characterization of electrically conductive sol-gels. In the biology realm, the search for new surface fabrication schemes that would permit or even improve the detection of specific biological reactions motivated the design of miniaturized biological arrays. Collectively, this work represents some of analytical chemistry’s newest forays into these disciplines. The introduction section to this dissertation provides a literature review on several of the key aspects of this work. In advance of the materials science discussion, a brief introduction into electrochemically-modulated liquid chromatography (EMLC) and sol-gel chemistry is provided. In advance of the biological discussions, brief overviews of scanning force microscopy (SFM) and the oxidative chemistry used to construct our biological arrays are provided. This section is followed by four chapters, each of which is presented as a separate manuscript, and focuses on work that describes some of our cross-disciplinary efforts within materials science and biology. This dissertation concludes with a general summary and future prospectus.

  5. Development Approach for the Accommodation of Materials Science Research for the Materials Science Research Facility on the International Space Station

    Science.gov (United States)

    Schaefer, D. A.; Cobb, S. D.; Szofran, F. R.

    2000-01-01

    The Materials Science Research Facility (MSRF) is a modular facility comprised of autonomous Materials Science Research Racks (MSRR's) for research in the microgravity environment afforded by the International Space Station (ISS). The initial MSRF concept consists of three Materials Science Research Racks (MSRR-1, MSRR-2, and MSRR-3) which will be developed for a phased deployment beginning on the third Utilization Flight (UF-3). The facility will house materials processing apparatus and common subsystems required for operating each device. Each MSRR is a stand alone autonomous rack and will be comprised of either on-orbit replaceable Experiment Modules, Module Inserts, investigation unique apparatus, and/or multiuser generic processing apparatus. Each MSRR will support a wide range of materials science themes in the NASA research program and will use the ISS Active Rack Isolation System (ARIS). MSRF is being developed for the United States Laboratory Module and will provide the apparatus for satisfying near-term and long-range Materials Science Discipline goals and objectives.

  6. Active Sites Environmental Monitoring Program: Mid-FY 1991 report

    Energy Technology Data Exchange (ETDEWEB)

    Ashwood, T.L.; Wickliff, D.S.; Morrissey, C.M.

    1991-10-01

    This report summarizes the activities of the Active Sites Environmental Monitoring Program (ASEMP) from October 1990 through March 1991. The ASEMP was established in 1989 by Solid Waste Operations and the Environmental Sciences Division to provide early detection and performance monitoring at active low-level radioactive waste (LLW) disposal sites in Solid Waste Storage Area (SWSA) 6 and transuranic (TRU) waste storage sites in SWSA 5 as required by chapters II and III of US Department of Energy Order 5820.2A. Monitoring results continue to demonstrate the no LLW is being leached from the storage vaults on the tumulus pads. Loading of vaults on Tumulus II began during this reporting period and 115 vaults had been loaded by the end of March 1991.

  7. Learning physical descriptors for materials science by compressed sensing

    Science.gov (United States)

    Ghiringhelli, Luca M.; Vybiral, Jan; Ahmetcik, Emre; Ouyang, Runhai; Levchenko, Sergey V.; Draxl, Claudia; Scheffler, Matthias

    2017-02-01

    The availability of big data in materials science offers new routes for analyzing materials properties and functions and achieving scientific understanding. Finding structure in these data that is not directly visible by standard tools and exploitation of the scientific information requires new and dedicated methodology based on approaches from statistical learning, compressed sensing, and other recent methods from applied mathematics, computer science, statistics, signal processing, and information science. In this paper, we explain and demonstrate a compressed-sensing based methodology for feature selection, specifically for discovering physical descriptors, i.e., physical parameters that describe the material and its properties of interest, and associated equations that explicitly and quantitatively describe those relevant properties. As showcase application and proof of concept, we describe how to build a physical model for the quantitative prediction of the crystal structure of binary compound semiconductors.

  8. Materials Knowledge Systems in Python - A Data Science Framework for Accelerated Development of Hierarchical Materials.

    Science.gov (United States)

    Brough, David B; Wheeler, Daniel; Kalidindi, Surya R

    2017-03-01

    There is a critical need for customized analytics that take into account the stochastic nature of the internal structure of materials at multiple length scales in order to extract relevant and transferable knowledge. Data driven Process-Structure-Property (PSP) linkages provide systemic, modular and hierarchical framework for community driven curation of materials knowledge, and its transference to design and manufacturing experts. The Materials Knowledge Systems in Python project (PyMKS) is the first open source materials data science framework that can be used to create high value PSP linkages for hierarchical materials that can be leveraged by experts in materials science and engineering, manufacturing, machine learning and data science communities. This paper describes the main functions available from this repository, along with illustrations of how these can be accessed, utilized, and potentially further refined by the broader community of researchers.

  9. Contribution of Frenkel's theory to the development of materials science

    Directory of Open Access Journals (Sweden)

    Pavlović V.B.

    2006-01-01

    Full Text Available The original and comprehensive research of Yakov Ilich Frenkel in physics and physical chemistry of condensed states, nuclear physics, electrodynamics, science of sintering has significantly contributed to the development of modern scientific knowledge and his scientific ideas are still an inspiration to many scientists. Having in mind the wealth of scientific ideas he had in the research of electroconductivity in metals, crystal structure imperfections and phase transitions and in founding the science of sintering, the contribution of individual theories of Frenkel of significance to materials science are presented in this paper.

  10. Materials Science Standard Rack on Interntional Space Station (ISS)

    Science.gov (United States)

    1999-01-01

    Line drawing depicts the location of one of three racks that will make up the Materials Science Research Facility in the U.S. Destiny laboratory module to be attached to the International Space Station (ISS). Other positions will be occupied by a variety of racks supporting research in combustion, fluids, biotechnology, and human physiology, and racks to support lab and station opertions. The Materials Science Research Facility is managed by NASA's Marshall Space Flight Center. Photo credit: NASA/Marshall Space Flight Center

  11. Using a profiling process to insure program quality: Volume II - support materials. Final progress report, May 15, 1991--November 14, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Kaser, J.S.; Roody, D.S.; Raizen, S.A.

    1996-11-01

    Between 1990 and 1995 the U.S. Department of Energy (DOE) and the National Center for Improving Science Education (National Center) developed a system for ongoing evaluation of K-12 educational programs in the DOE-supported national energy Laboratories. As part of the formative evaluation component of this collaborative endeavor, field staff in the Laboratories began creating profiles of their programs. However, many individuals within DOE Headquarters were not familiar with this profiling process and were unprepared to use the valuable information that the profiles generated. This manual was produced to orient Headquarters staff to profiling. It focuses on how Headquarters staff can use the profiling process to help their funded programs establish and/or maintain high quality. Its purpose, then, is not to train Headquarters staff to become proficient in profiling, but to show them how to draw on the Laboratories` use of profiling to bring about program improvement. Profiling is the process of systematically examining and describing a program`s elements against a set of components that define Effective Practice. The instrument used to capture the data for analysis is called a template, and most of this manual focuses on the templates and how to read and interpret them. However, since it is important to understand these data in context, the authors also describe what should accompany each template in a complete profiling packet and offer guidelines for reviewing complete packets and providing feedback to program managers. This document consists of Support Materials for the manual: exercise answer keys; templates; guidelines for reviewing templates; a complete profiling packet; guidelines for the trainer.

  12. Energy sciences supercomputing 1990

    Energy Technology Data Exchange (ETDEWEB)

    Mirin, A.A.; Kaiper, G.V. (eds.)

    1990-01-01

    This report contains papers on the following topics: meeting the computational challenge; lattice gauge theory: probing the standard model; supercomputing for the superconducting super collider; and overview of ongoing studies in climate model diagnosis and intercomparison; MHD simulation of the fueling of a tokamak fusion reactor through the injection of compact toroids; gyrokinetic particle simulation of tokamak plasmas; analyzing chaos: a visual essay in nonlinear dynamics; supercomputing and research in theoretical chemistry; monte carlo simulations of light nuclei; parallel processing; and scientists of the future: learning by doing.

  13. Polycrystalline thin film materials and devices. Final subcontract report, 16 January 1990--15 January 1993

    Energy Technology Data Exchange (ETDEWEB)

    Birkmire, R.W.; Phillips, J.E.; Shafarman, W.N.; Hegedus, S.S.; McCandless, B.E.; Yokimcus, T.A. [Delaware Univ., Newark, DE (United States). Inst. of Energy Conversion

    1993-08-01

    This report describes results and conclusions of the final phase (III) of a three-year research program on polycrystalline thin-film heterojunction solar cells. The research consisted of the investigation of the relationships between processing, materials properties, and device performance. This relationship was quantified by device modeling and analysis. The analysis of thin-film polycrystalline heterojunction solar cells explains how minority-carrier recombination at the metallurgical interface and at grain boundaries can be greatly reduced by the proper doping of the window and absorber layers. Additional analysis and measurements show that the present solar cells are limited by the magnitude of the diode current, which appears to be caused by recombination in the space charge region. Developing an efficient commercial-scale process for fabricating large-area polycrystalline, thin-film solar cells from a research process requires a detailed understanding of the individual steps in making the solar cell, and their relationship to device performance and reliability. The complexities involved in characterizing a process are demonstrated with results from our research program on CuInSe{sub 2}, and CdTe processes.

  14. Basic Research in Materials Science and Economic Sustainable Growth

    Science.gov (United States)

    Habermeier, H.-U.

    2000-09-01

    The necessity of public funding of basic research has been proclaimed by V. Bush 1945 in the `social contract for science' and this concept has been unanimously accepted as a vital prerequisite for the wealth of nations during the past 50 years. Recent developments gave rise to a paradigm shift away from the Bush's concept. In this paper this development is critically explored and the economical impact of research is discussed. Current evolution in knowledge generation and a change of the political boundary conditions require a new concept for an integrated research system. Examples taken from the semiconductor industry serve as an indicator of the enabling importance of materials science and condensed matter physics in the past. Basic research in materials science of functional ceramics generated new developments that are believed to have similar impact in the future. Already appearing and in the years ahead more emphasized nature of materials science as an multidisciplinary activity serves a model for the proposal of the vision of an integrated system of basic research and education. This is a prerequisite to master the challenges we are facind in the next century. A science based winning culture is the model for the future.

  15. Biomimetics in materials science self-healing, self-lubricating, and self-cleaning materials

    CERN Document Server

    Nosonovsky, Michael

    2012-01-01

    Biomimetics in Materials Science provides a comprehensive theoretical and practical review of biomimetic materials with self-healing, self-lubricating and self-cleaning properties. These three topics are closely related and constitute rapidly developing areas of study. The field of self-healing materials requires a new conceptual understanding of this biomimetic technology, which is in contrast to traditional  engineering processes such as wear and fatigue.  Biomimetics in Materials Science is the first monograph to be devoted to these materials. A new theoretical framework for these processes is presented based on the concept of multi-scale structure of entropy and non-equilibrium thermodynamics, together with a detailed review of the available technology. The latter includes experimental, modeling, and simulation results obtained on self-healing/lubricating/cleaning materials since their emergence in the past decade. Describes smart, biomimetic materials in the context of nanotechnology, biotechnology, an...

  16. Analysis of Co-Authorship Indicators, Betweenness Centrality and Structural Holes of the Iranian Nanotechnology Researchers in Science Citation Index (1991-2011

    Directory of Open Access Journals (Sweden)

    Mohammad Hassanzadeh

    2012-12-01

    Full Text Available This research aimed to investigate Iranian papers on nanotechnology area against some scientometrics indicators such as most prolific, most cited and so on. The statistical population were all papers have been published by Iranian researchers on nanotechnology in the Science Citation Index (SCI from 1991 to 7 August 2011 (4605 records that has been done with the aim of identifying, the most prolific, most cited and most effect of Iranian nanotechnology scientists. The results showed that the collaborative index in per-document was 3.39. The highest collaborative index was in 1997 with six authors by per-document. Iranian nanotechnology researchers' degree of collaboration was 0.96 this indicates, greater tendency of nanotechnology authors towards co-authorship. Considering total collaboration coefficient (0.64, nanotechnology authors have shown tendency to production of scientific collaborative document. The highest collaboration coefficient (0.83 And the lowest collaboration coefficient (0.5 have been allocated to the 1997 and 1991 respectively.

  17. Materials Science Research Rack Onboard the International Space Station

    Science.gov (United States)

    Reagan, S. E.; Lehman, J. R.; Frazier, N. C.

    2016-01-01

    The Materials Science Research Rack (MSRR) is a research facility developed under a cooperative research agreement between NASA and ESA for materials science investigations on the International Space Station (ISS). MSRR was launched on STS-128 in August 2009 and currently resides in the U.S. Destiny Laboratory Module. Since that time, MSRR has logged more than 1400 hours of operating time. The MSRR accommodates advanced investigations in the microgravity environment on the ISS for basic materials science research in areas such as solidification of metals and alloys. The purpose is to advance the scientific understanding of materials processing as affected by microgravity and to gain insight into the physical behavior of materials processing. MSRR allows for the study of a variety of materials, including metals, ceramics, semiconductor crystals, and glasses. Materials science research benefits from the microgravity environment of space, where the researcher can better isolate chemical and thermal properties of materials from the effects of gravity. With this knowledge, reliable predictions can be made about the conditions required on Earth to achieve improved materials. MSRR is a highly automated facility with a modular design capable of supporting multiple types of investigations. The NASA-provided Rack Support Subsystem provides services (power, thermal control, vacuum access, and command and data handling) to the ESA-developed Materials Science Laboratory (MSL) that accommodates interchangeable Furnace Inserts (FI). Two ESA-developed FIs are presently available on the ISS: the Low Gradient Furnace (LGF) and the Solidification and Quenching Furnace (SQF). Sample Cartridge Assemblies (SCAs), each containing one or more material samples, are installed in the FI by the crew and can be processed at temperatures up to 1400degC. ESA continues to develop samples with 14 planned for launch and processing in the near future. Additionally NASA has begun developing SCAs to

  18. Research in Materials Science: Superconducting Transition Metal Alloys

    Science.gov (United States)

    1975-07-31

    Myron Hale Frommer , Ph.D. Thesis, MIT (Metallurgy and Materials Science, 1973) unpublished. t-1.■>-’-■ ^mm^m^^^m^^ßm^^^^f*rm**^^1**^^^*mi^^~*^^^^^m...77- 12. J. Bostock, Kofi Agyeman, M.H. Frommer , and M.L.A. MacVicar, J. Appl. Phys. 44 (1973j 5567. 13. W. N. Cheung (unpublished

  19. Mathematical Research in Materials Science: Opportunities and Perspectives. Part 2

    Science.gov (United States)

    1993-01-01

    mainly involves classical mathematics and therefore little knowledge of modern mathematics , especially tools that might be beneficial for exploring...application. The committee believes that a considerable amount of modern mathematics and statistics would be useful in resolving problems of materials science

  20. Polymerization Simulator for Introductory Polymer and Material Science Courses

    Science.gov (United States)

    Chirdon, William M.

    2010-01-01

    This work describes how molecular simulation of polymerization reactions can be used to enrich introductory polymer or material science courses to give students a deeper understanding of free-radical chain and stepwise growth polymerization reactions. These simulations have proven to be effective media for instruction that do not require material…

  1. Introduction of Materials Science Through Solid State Chemistry.

    Science.gov (United States)

    Mueller, William M.

    Presented is a report of a program of the American Society for Metals, designed to introduce materials science principles via solid state chemistry into high school chemistry courses. At the time of the inception of this program in the mid-sixties, it was felt that high school students were not being adequately exposed to career opportunities in…

  2. Materials for construction and civil engineering science, processing, and design

    CERN Document Server

    Margarido, Fernanda

    2015-01-01

    This expansive volume presents the essential topics related to construction materials composition and their practical application in structures and civil installations. The book's diverse slate of expert authors assemble invaluable case examples and performance data on the most important groups of materials used in construction, highlighting aspects such as nomenclature, the properties, the manufacturing processes, the selection criteria, the products/applications, the life cycle and recyclability, and the normalization. Civil Engineering Materials: Science, Processing, and Design is ideal for practicing architects; civil, construction, and structural engineers, and serves as a comprehensive reference for students of these disciplines. This book also: ·       Provides a substantial and detailed overview of traditional materials used in structures and civil infrastructure ·       Discusses properties of natural and synthetic materials in construction and materials' manufacturing processes ·  �...

  3. 49 CFR 199.1 - Scope.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Scope. 199.1 Section 199.1 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY DRUG AND ALCOHOL TESTING General § 199.1 Scope....

  4. Annual report 1991

    Energy Technology Data Exchange (ETDEWEB)

    Broda, R.; Lesniak, L.; Malecki, P.; Stachura, Z.; Wojciechowski, H. [eds.

    1992-12-31

    The material presented describing the scientific activities of the Henryk Niewodniczanski Institute of Nuclear Physics in 1991 is the first annual report in several years.The arrangement of the report from various departments reflect the present structure of the Institute and is meant to help in the future task of reconstructing the Institute. Few guidelines proposed by the editorial board gave the individual departments much freedom in selecting the material and choosing the volume and format of presentation. (author).

  5. Materials Research Society Symposium Proceedings Held in Boston, Massachusetts on 4-6 December 1991. Low Temperature (LT) GaAs and Related Materials. Volume 241.

    Science.gov (United States)

    1992-09-14

    this, session chairs played a key role. In addition, they had major responsibility for the refereeing of the manuscripts. They were: M. Delany F.W...11. A.E. Schmitz, L.D. Nguyen, A.S. Brown and R.A. Metzger, DRC Abstracts, Boulder, CO.(1991). 12. M.Y. Frankel, J.F. Whitaker, G.A. Mourou, F.W...A.E. Schmitz, L.D. Nguyen, A.S. Brown, and R.A. Metzger, 1991 DRC , Boulder, CO. 15. J.F. Jensen, W.E. Stanchina, R.A. Metzger, D.B. Rensch, R.F. Lohr

  6. Computational Materials Science and Chemistry: Accelerating Discovery and Innovation through Simulation-Based Engineering and Science

    Energy Technology Data Exchange (ETDEWEB)

    Crabtree, George [Argonne National Lab. (ANL), Argonne, IL (United States); Glotzer, Sharon [University of Michigan; McCurdy, Bill [University of California Davis; Roberto, Jim [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2010-07-26

    This report is based on a SC Workshop on Computational Materials Science and Chemistry for Innovation on July 26-27, 2010, to assess the potential of state-of-the-art computer simulations to accelerate understanding and discovery in materials science and chemistry, with a focus on potential impacts in energy technologies and innovation. The urgent demand for new energy technologies has greatly exceeded the capabilities of today's materials and chemical processes. To convert sunlight to fuel, efficiently store energy, or enable a new generation of energy production and utilization technologies requires the development of new materials and processes of unprecedented functionality and performance. New materials and processes are critical pacing elements for progress in advanced energy systems and virtually all industrial technologies. Over the past two decades, the United States has developed and deployed the world's most powerful collection of tools for the synthesis, processing, characterization, and simulation and modeling of materials and chemical systems at the nanoscale, dimensions of a few atoms to a few hundred atoms across. These tools, which include world-leading x-ray and neutron sources, nanoscale science facilities, and high-performance computers, provide an unprecedented view of the atomic-scale structure and dynamics of materials and the molecular-scale basis of chemical processes. For the first time in history, we are able to synthesize, characterize, and model materials and chemical behavior at the length scale where this behavior is controlled. This ability is transformational for the discovery process and, as a result, confers a significant competitive advantage. Perhaps the most spectacular increase in capability has been demonstrated in high performance computing. Over the past decade, computational power has increased by a factor of a million due to advances in hardware and software. This rate of improvement, which shows no sign of

  7. Perspective: Codesign for materials science: An optimal learning approach

    Science.gov (United States)

    Lookman, Turab; Alexander, Francis J.; Bishop, Alan R.

    2016-05-01

    A key element of materials discovery and design is to learn from available data and prior knowledge to guide the next experiments or calculations in order to focus in on materials with targeted properties. We suggest that the tight coupling and feedback between experiments, theory and informatics demands a codesign approach, very reminiscent of computational codesign involving software and hardware in computer science. This requires dealing with a constrained optimization problem in which uncertainties are used to adaptively explore and exploit the predictions of a surrogate model to search the vast high dimensional space where the desired material may be found.

  8. Follow-Up Study of Former Materials/Logistics Management Students at Harper College, 1990-1995. Volume XXIV, Number 14.

    Science.gov (United States)

    Lucas, John A.; Magad, Eugene

    In fall 1995, William Rainey Harper College in Illinois conducted a study of former students in the Materials/Logistics Management (MLM) program to determine their evaluation of their educational experiences in the program. The sample consisted of 298 former MLM students from 1990 to 1995, including 119 students who had earned 48 credit hours but…

  9. Ultrasonic spectroscopy applications in condensed matter physics and materials science

    CERN Document Server

    Leisure, Robert G

    2017-01-01

    Ultrasonic spectroscopy is a technique widely used in solid-state physics, materials science, and geology that utilizes acoustic waves to determine fundamental physical properties of materials, such as their elasticity and mechanical energy dissipation. This book provides complete coverage of the main issues relevant to the design, analysis, and interpretation of ultrasonic experiments. Topics including elasticity, acoustic waves in solids, ultrasonic loss, and the relation of elastic constants to thermodynamic potentials are covered in depth. Modern techniques and experimental methods including resonant ultrasound spectroscopy, digital pulse-echo, and picosecond ultrasound are also introduced and reviewed. This self-contained book includes extensive background theory and is accessible to students new to the field of ultrasonic spectroscopy, as well as to graduate students and researchers in physics, engineering, materials science, and geophysics.

  10. Nature of science in instruction materials of science through the model of educational reconstruction

    Science.gov (United States)

    Azizah, Nur; Mudzakir, Ahmad

    2016-02-01

    The study was carried out to reconstruct the science teaching materials charged view of the nature of science (VNOS). This reconstruction process using the Model of Educational Reconstruction (MER), which is the framework for research and development of science education as well as a guide for planning the teaching of science in the schools is limited in two stages, namely: content structure analysis, and empirical studies of learners. The purpose of this study is to obtain a pre-conception of learners and prospective scientists to the topic of the nature of the material and utilization. The method used to descriptive with the instruments is guidelines for interviews for 15 students of class VIII, text analysis sheet, sheet analysis of the concept, and the validation sheet indicators and learning objectives NOS charged on cognitive and affective aspects. The results obtained in the form of pre-conceptions of learners who demonstrate almost 100% of students know the types of materials and some of its nature, the results of the scientist's perspective on the topic of the nature of the material and its use, as well as the results of the validation indicators and learning objectives charged NOS and competencies PISA 2015 cognitive and affective aspects with CVI value of 0.99 and 1.0 after being validated by five experts. This suggests that the indicators and the resulting learning objectives feasible and can proceed to the reconstruction of teaching materials on the topic of material properties and utilization.

  11. Southeast Alaska cetacean vessel surveys conducted by Alaska Fisheries Science Center, National Marine Mammals Laboratory from 1991-04-20 to 2012-07-20 (NCEI Accession 0140931)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — In 1991, NMML initiated cetacean studies with vessel coverage throughout inland waters of Southeast Alaska. Between 1991 and 1993, line-transect methodology was used...

  12. An Interdisciplinary Program in Materials Science at James Madison University.

    Science.gov (United States)

    Hughes, Chris

    2008-03-01

    Over the past decade a core group of faculty at James Madison University has created an interdisciplinary program in materials science that provides our students with unique courses and research experiences that augment the existing, high-quality majors in physics and astronomy, chemistry and biochemistry, geology and environmental science, mathematics and statistics, and integrated science and technology. The university started this program by creating a Center for Materials Science whose budget is directly allocated by the provost. This source of funds acts as seed money for research, support for students, and a motivating factor for each of the academic units to support the participation of their faculty in the program. Courses were created at the introductory and intermediate level that are cross-listed by the departments to encourage students to enroll in them as electives toward their majors. Furthermore, the students are encouraged to participate in undergraduate research in materials since this is the most fundamental unifying theme across the disciplines. This talk will cover some of the curricular innovations that went into the design of the program to make it successful, examples of faculty and student research and how that feeds back into the classroom, and success stories of the interactions that have developed between departments because of this program. Student outcomes and future plans to improve the program will also be discussed.

  13. Materials Science Experiments on the International Space Station

    Science.gov (United States)

    Gillies, Donald C.

    1999-01-01

    The Performance Goal for NASA's Microgravity Materials Science Program reads "Use microgravity to establish and improve quantitative and predictive relationships between the structure, processing and properties of materials." The advent of the International Space Station will open up a new era in Materials Science Research including the ability to perform long term and frequent experiments in microgravity. As indicated the objective is to gain a greater understanding of issues of materials science in an environment in which the force of gravity can be effectively switched off. Thus gravity related issues of convection, buoyancy and hydrostatic forces can be reduced and the science behind the structure/processing/properties relationship can more easily be understood. The specific areas of research covered within the program are (1) the study of Nucleation and Metastable States, (2) Prediction and Control of Microstructure (including pattern formation and morphological stability), (3) Phase Separation and Interfacial Stability, (4) Transport Phenomena (including process modeling and thermophysical properties measurement), and (5) Crystal Growth, and Defect Generation and Control. All classes of materials, including metals and alloys, glasses and ceramics, polymers, electronic materials (including organic and inorganic single crystals), aerogels and nanostructures, are included in these areas. The principal experimental equipment available to the materials scientist on the International Space Station (ISS) will be the Materials Science Research Facility (MSRF). Each of these systems will be accommodated in a single ISS rack, which can operate autonomously, will accommodate telescience operations, and will provide real time data to the ground. Eventual plans call for three MSRF racks, the first of which will be shared with the European Space Agency (ESA). Under international agreements, ESA and other partners will provide some of the equipment, while NASA covers launch

  14. Materials Science Experiments on the International Space Station

    Science.gov (United States)

    Gillies, Donald C.

    1999-01-01

    The Performance Goal for NASA's Microgravity Materials Science Program reads "Use microgravity to establish and improve quantitative and predictive relationships between the structure, processing and properties of materials." The advent of the International Space Station will open up a new era in Materials Science Research including the ability to perform long term and frequent experiments in microgravity. As indicated the objective is to gain a greater understanding of issues of materials science in an environment in which the force of gravity can be effectively switched off. Thus gravity related issues of convection, buoyancy and hydrostatic forces can be reduced and the science behind the structure/processing/properties relationship can more easily be understood. The specific areas of research covered within the program are (1) the study of Nucleation and Metastable States, (2) Prediction and Control of Microstructure (including pattern formation and morphological stability), (3) Phase Separation and Interfacial Stability, (4) Transport Phenomena (including process modeling and thermophysical properties measurement), and (5) Crystal Growth, and Defect Generation and Control. All classes of materials, including metals and alloys, glasses and ceramics, polymers, electronic materials (including organic and inorganic single crystals), aerogels and nanostructures, are included in these areas. The principal experimental equipment available to the materials scientist on the International Space Station (ISS) will be the Materials Science Research Facility (MSRF). Each of these systems will be accommodated in a single ISS rack, which can operate autonomously, will accommodate telescience operations, and will provide real time data to the ground. Eventual plans call for three MSRF racks, the first of which will be shared with the European Space Agency (ESA). Under international agreements, ESA and other partners will provide some of the equipment, while NASA covers launch

  15. Chemistry and Materials Science Directorate 2005 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Diaz De La Rubia, T; Fluss, M J; Rath, K; Rennie, G; Shang, S; Kitrinos, G

    2006-08-08

    In 1952, we began laboratory operations in the barracks building of the Naval Air Station with approximately 50 employees. Today, the Chemistry and Materials Science (CMS) Directorate is a major organization at the Lawrence Livermore National Laboratory with more than 500 employees who continue to contribute to our evolving national security mission. For more than half a century, the mission of the Laboratory revolved primarily around nuclear deterrence and associated defense technologies. Today, Livermore supports a broad-based national security mission, and our specialized capabilities increasingly support emerging missions in human health and energy security. In the future, CMS will play a significantly expanded role in science and technology at the intersection of national security, energy and environment, and health. Our world-class workforce will provide the science and technology base for radically innovative materials to our programs and sponsors. Our 2005 Annual Report describes how our successes and breakthroughs follow a path set forward by our strategic plan and four organizing research themes, each with key scientific accomplishments by our staff and collaborators. Organized into two major sections-research themes and dynamic teams, this report focuses on achievements arising from earlier investments that address future challenges. The research presented in this annual report gives substantive examples of how we are proceeding in each of these four theme areas and how they are aligned with our national security mission. Research Themes: (1) Materials Properties and Performance under Extreme Conditions--We are developing ultrahard nanocrystalline metals, exploring the properties of nanotubes when exposed to very high temperatures, and engineering stronger materials to meet future needs for materials that can withstand extreme conditions. (2) Chemistry under Extreme Conditions and Chemical Engineering to Support National-Security Programs--Our recent

  16. Chemistry and Materials Science Directorate 2005 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Diaz De La Rubia, T; Fluss, M J; Rath, K; Rennie, G; Shang, S; Kitrinos, G

    2006-08-08

    In 1952, we began laboratory operations in the barracks building of the Naval Air Station with approximately 50 employees. Today, the Chemistry and Materials Science (CMS) Directorate is a major organization at the Lawrence Livermore National Laboratory with more than 500 employees who continue to contribute to our evolving national security mission. For more than half a century, the mission of the Laboratory revolved primarily around nuclear deterrence and associated defense technologies. Today, Livermore supports a broad-based national security mission, and our specialized capabilities increasingly support emerging missions in human health and energy security. In the future, CMS will play a significantly expanded role in science and technology at the intersection of national security, energy and environment, and health. Our world-class workforce will provide the science and technology base for radically innovative materials to our programs and sponsors. Our 2005 Annual Report describes how our successes and breakthroughs follow a path set forward by our strategic plan and four organizing research themes, each with key scientific accomplishments by our staff and collaborators. Organized into two major sections-research themes and dynamic teams, this report focuses on achievements arising from earlier investments that address future challenges. The research presented in this annual report gives substantive examples of how we are proceeding in each of these four theme areas and how they are aligned with our national security mission. Research Themes: (1) Materials Properties and Performance under Extreme Conditions--We are developing ultrahard nanocrystalline metals, exploring the properties of nanotubes when exposed to very high temperatures, and engineering stronger materials to meet future needs for materials that can withstand extreme conditions. (2) Chemistry under Extreme Conditions and Chemical Engineering to Support National-Security Programs--Our recent

  17. Performance indicators, third quarter CY-1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    Secretary of Energy Notice (SEN-29-91) directed that a Department- wide ``uniform system of Performance Indicators (PI`s) for trending and analyzing operational data to help assess and support progress in improving performance and in strengthening line management control of operations relating to environmental safety, and health activities`` be developed. This Performance Indicator Report represents a compilation of data for the third quarter of calendar year 1991 for the following Lawrence Berkeley Laboratory (LBL) facilities: (1) Bevalac, (2) 88-Inch Cyclotron, (3) Materials Sciences Division.

  18. Performance indicators, third quarter CY-1991

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    Secretary of Energy Notice (SEN-29-91) directed that a Department- wide uniform system of Performance Indicators (PI's) for trending and analyzing operational data to help assess and support progress in improving performance and in strengthening line management control of operations relating to environmental safety, and health activities'' be developed. This Performance Indicator Report represents a compilation of data for the third quarter of calendar year 1991 for the following Lawrence Berkeley Laboratory (LBL) facilities: (1) Bevalac, (2) 88-Inch Cyclotron, (3) Materials Sciences Division.

  19. Perspective: Materials Informatics and Big Data: Realization of the Fourth Paradigm of Science in Materials Science

    Science.gov (United States)

    2016-08-17

    regression techniques can be used for predic- tive modeling and if it is categorical (e.g., whether a compound is metallic or not), classification... clustering and relationship mining depending on the goal of the project, for instance, to find group similar materials or discovering hidden patterns and...analytics framework on simulation data from quantum mechanical DFT calculations. Performing a DFT simulation on a material requires its composition and

  20. Semiconductor Nanowires from Materials Science and Device Physics Perspectives

    Science.gov (United States)

    Samuelson, Lars

    2005-03-01

    Realization of extremely down-scaled devices gives tough challenges related to technology and materials science. One reason for the concern is that top-down fabricated nano-devices tend to have their properties dominated by process-induced damage, rendering ultra-small devices not so useful. Alternatively, bottom-up fabrication methods may allow dimensions on the scale even below 10 nm, still with superb device properties. I will in this talk describe our research on catalytically induced growth of semiconductor nanowires. Our method uses catalytic gold nanoparticles, allowing tight control of diameter as well as position of where the nanowire grows, with our work completely focused on epitaxially nucleated nanowires in which the nanowire structure can be seen as a coherent, monolithic extension of the crystalline substrate material. One of the most important achievements in this field of research is the realization of atomically abrupt heterostructures within nanowires, in which the material composition can be altered within only one or a few monolayers, thus allowing 1D heterostructure devices to be realized. This has allowed a variety of quantum devices to be realized, such as single-electron transistors, resonant tunneling devices as well as memory storage devices. A related recent field of progress has been the realization of ideally nucleated III-V nanowires on Si substrates, cases where we have also reported functioning III-V heterostructure device structures on Si. All of these device related challenges evolve from an improved understanding of the materials science involved in nucleation of nanowires, in altering of composition of the growing nanowire, in control of the growth direction etc. I will give examples of these materials science issues and will especially dwell on the opportunities to form new kinds of materials, e.g. as 3D complex nanowire structures, resembling nanotrees or nanoforests.

  1. The Materials Science beamline upgrade at the Swiss Light Source

    Energy Technology Data Exchange (ETDEWEB)

    Willmott, P. R., E-mail: philip.willmott@psi.ch; Meister, D.; Leake, S. J.; Lange, M.; Bergamaschi, A. [Swiss Light Source, Paul Scherrer Institut, CH-5232 Villigen (Switzerland); and others

    2013-07-16

    The wiggler X-ray source of the Materials Science beamline at the Swiss Light Source has been replaced with a 14 mm-period cryogenically cooled in-vacuum undulator. In order to best exploit the increased brilliance of this new source, the entire front-end and optics have been redesigned. The Materials Science beamline at the Swiss Light Source has been operational since 2001. In late 2010, the original wiggler source was replaced with a novel insertion device, which allows unprecedented access to high photon energies from an undulator installed in a medium-energy storage ring. In order to best exploit the increased brilliance of this new source, the entire front-end and optics had to be redesigned. In this work, the upgrade of the beamline is described in detail. The tone is didactic, from which it is hoped the reader can adapt the concepts and ideas to his or her needs.

  2. [Advances of poly (ionic liquid) materials in separation science].

    Science.gov (United States)

    Liu, Cuicui; Guo, Ting; Su, Rina; Gu, Yuchen; Deng, Qiliang

    2015-11-01

    Ionic liquids, as novel ionization reagents, possess beneficial characteristics including good solubility, conductivity, thermal stability, biocompatibility, low volatility and non-flammability. Ionic liquids are attracting a mass of attention of analytical chemists. Poly (ionic liquid) materials have common performances of ionic liquids and polymers, and have been successfully applied in separation science area. In this paper, we discuss the interaction mechanisms between the poly(ionic liquid) materials and analytes including hydrophobic/hydrophilic interactions, hydrogen bond, ion exchange, π-π stacking and electrostatic interactions, and summarize the application advances of the poly(ionic liquid) materials in solid phase extraction, chromatographic separation and capillary electrophoresis. At last, we describe the future prospect of poly(ionic liquid) materials.

  3. Computational Materials Science and Chemistry: Accelerating Discovery and Innovation through Simulation-Based Engineering and Science

    Energy Technology Data Exchange (ETDEWEB)

    Crabtree, George [Argonne National Lab. (ANL), Argonne, IL (United States); Glotzer, Sharon [University of Michigan; McCurdy, Bill [University of California Davis; Roberto, Jim [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2010-07-26

    This report is based on a SC Workshop on Computational Materials Science and Chemistry for Innovation on July 26-27, 2010, to assess the potential of state-of-the-art computer simulations to accelerate understanding and discovery in materials science and chemistry, with a focus on potential impacts in energy technologies and innovation. The urgent demand for new energy technologies has greatly exceeded the capabilities of today's materials and chemical processes. To convert sunlight to fuel, efficiently store energy, or enable a new generation of energy production and utilization technologies requires the development of new materials and processes of unprecedented functionality and performance. New materials and processes are critical pacing elements for progress in advanced energy systems and virtually all industrial technologies. Over the past two decades, the United States has developed and deployed the world's most powerful collection of tools for the synthesis, processing, characterization, and simulation and modeling of materials and chemical systems at the nanoscale, dimensions of a few atoms to a few hundred atoms across. These tools, which include world-leading x-ray and neutron sources, nanoscale science facilities, and high-performance computers, provide an unprecedented view of the atomic-scale structure and dynamics of materials and the molecular-scale basis of chemical processes. For the first time in history, we are able to synthesize, characterize, and model materials and chemical behavior at the length scale where this behavior is controlled. This ability is transformational for the discovery process and, as a result, confers a significant competitive advantage. Perhaps the most spectacular increase in capability has been demonstrated in high performance computing. Over the past decade, computational power has increased by a factor of a million due to advances in hardware and software. This rate of improvement, which shows no sign of

  4. Neutron scattering treatise on materials science and technology

    CERN Document Server

    Kostorz, G

    1979-01-01

    Treatise on Materials Science and Technology, Volume 15: Neutron Scattering shows how neutron scattering methods can be used to obtain important information on materials. The book discusses the general principles of neutron scattering; the techniques used in neutron crystallography; and the applications of nuclear and magnetic scattering. The text also describes the measurement of phonons, their role in phase transformations, and their behavior in the presence of crystal defects; and quasi-elastic scattering, with its special merits in the study of microscopic dynamical phenomena in solids and

  5. SCOPE OF MEDICINE BIOINORGANIC CHEMISTRY, HYDRO AND MATERIALS SCIENCE

    OpenAIRE

    Beyer, L.; Universidad de Leipzig/Alemania, Facultad de Química y Mineralogía,Instituto de Química Inorgánica.Talstr. 35 041034 Leipzig República Federal Alemana; Angulo Cornejo, J.; Universidad Mayor de San Marcos, Facultad de química e Ingeniería Química. Departamento de Química inorgánica. Av. Venezuela S/N, Ciudad universitaria, Apartado 05-018 Breña, Lima-Perú

    2014-01-01

    The Bioinorganic Chemistry is the newest discipline of Inorganic Chemistry. Despite his youth, has found many applications in various fields such as medicine, Hidrometalugia and Materials Science. in this article an overview of the current status of research in this area is presented through concrete examples of the principles and applications as the study of biominerals, biomineralization processes, bioceramic, bioleaching and metal complexes for medicinal use (therapeutic and diagnostic). T...

  6. Applied solid state science advances in materials and device research

    CERN Document Server

    Wolfe, Raymond

    2013-01-01

    Applied Solid State Science: Advances in Materials and Device Research, Volume 1 presents articles about junction electroluminescence; metal-insulator-semiconductor (MIS) physics; ion implantation in semiconductors; and electron transport through insulating thin films. The book describes the basic physics of carrier injection; energy transfer and recombination mechanisms; state of the art efficiencies; and future prospects for light emitting diodes. The text then discusses solid state spectroscopy, which is the pair spectra observed in gallium phosphide photoluminescence. The extensive studies

  7. US Army Research Office research in progress, July 1, 1991--June 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-31

    The US Army Research Office, under the US Army Materiel Command (AMC), is responsible for coordinating and supporting research in the physical and engineering sciences, in materials science, geosciences, biology, and mathematics. This report describes research directly supported by the Army Research Projects Agency, and several AMC and other Army commands. A separate section is devoted to the research program at the US Army Research, Development and Standardization Group - United Kingdom. The present volume includes the research program in physics, chemistry, biological sciences, mathematics, engineering sciences, metallurgy and materials science, geosciences, electronics, and the European Research Program. It covers the 12-month period from 1 July 1991 through 30 June 1992.

  8. Accelerating the design of biomimetic materials by integrating RNA-seq with proteomics and materials science.

    Science.gov (United States)

    Guerette, Paul A; Hoon, Shawn; Seow, Yiqi; Raida, Manfred; Masic, Admir; Wong, Fong T; Ho, Vincent H B; Kong, Kiat Whye; Demirel, Melik C; Pena-Francesch, Abdon; Amini, Shahrouz; Tay, Gavin Z; Ding, Dawei; Miserez, Ali

    2013-10-01

    Efforts to engineer new materials inspired by biological structures are hampered by the lack of genomic data from many model organisms studied in biomimetic research. Here we show that biomimetic engineering can be accelerated by integrating high-throughput RNA-seq with proteomics and advanced materials characterization. This approach can be applied to a broad range of systems, as we illustrate by investigating diverse high-performance biological materials involved in embryo protection, adhesion and predation. In one example, we rapidly engineer recombinant squid sucker ring teeth proteins into a range of structural and functional materials, including nanopatterned surfaces and photo-cross-linked films that exceed the mechanical properties of most natural and synthetic polymers. Integrating RNA-seq with proteomics and materials science facilitates the molecular characterization of natural materials and the effective translation of their molecular designs into a wide range of bio-inspired materials.

  9. Computational materials science: The emergence of predictive capabilities of material behaviour

    Indian Academy of Sciences (India)

    Vijay Kumar

    2003-06-01

    The availability of high performance computers and development of efficient algorithms has led to the emergence of computational materials science as the third branch of materials research complementing the traditional theoretical and experimental approaches. It has created new virtual realities in materials design that are either experimentally not realizable easily or are prohibitively expensive. The possibilities of doing calculations from first principles have led to predictive capabilities that open up new avenues of discovering novel materials with desired properties, understanding material behaviour on the nano- to the macroscopic scale and helping research in new frontiers that could interface between nano-materials and drug design, as well as in understanding biological systems. Here, we describe some significant recent developments related to alloy and steel design as well as the study of matter on the nano-scale — an area that has gained much prominence in current materials research.

  10. Mineral Surface Reactivity in teaching of Science Materials

    Science.gov (United States)

    Del Hoyo Martínez, Carmen

    2013-04-01

    In the last fifty years, science materials issues has required the study of air pollution, water and soil to prevent and remedy the adverse effects of waste originating from anthropogenic activity and the development of new energies and new materials. The teaching of this discipline has been marked by lectures on general lines, materials, disciplines, who explained biased objects of reality, but often forgot the task of reconstruction and integration of such visions. Moving from that model, otherwise quite static, to a dynamic relational model, would in our view, a real revolution in education. This means taking a systematic approach to complex both in interpreting reality and in favor when learning. Children relationships are as important or more than single objects, and it is to discover fundamental organizational principles of phenomena we seek to interpret or in other words, find the pattern that connects. Thus, we must work on relationships and also take into account the relation between the observer and the observed. Educate about relationships means that studies should always be considered within a framework of probabilities, not absolute certainties. This model of systemic thinking, dealing with complexity, is a possibility to bring coherence to our educational work, because the complexity is not taught, complexity is live, so that complex thinking is extended (and fed) in a form educate complex. It is the task of teaching to help people move from level to level of decision reviews. This means that systems thinking should be extended in a local action, action that engages the individual and the environment. Science Materials has emerged as a discipline of free choice for pupils attending chemical engineering which has been assigned 6.0 credits. The chemical engineer's professional profile within the current framework is defined as a professional knowledge as a specialization technical / functional, working in a learning organization and the formation of

  11. Temperature profile data collected using BT and XBT casts in a World-wide distribution from NOAA Ship MALCOLM BALDRIGE and other platforms from 1990-06-22 to 1991-08-29 (NCEI Accession 9100184)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature profile data were collected using XBT and BT casts from NOAA Ship MALCOLM BALDRIGE and other platforms in a World-wide distribution from 22 June 1990 to...

  12. Activities of the Oil Implementation Task Force, reporting period March--August 1991; Contracts for field projects and supporting research on enhanced oil recovery, reporting period October--December 1990

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    Activities of DOE's Oil Implementation Task Force for the period March--August 1991 are reviewed. Contracts for fields projects and supporting research on enhanced oil recovery are discussed, with a list of related publications given. Enhanced recovery processes covered include chemical flooding, gas displacement, thermal recovery, and microbial recovery.

  13. The Future of Boundary Plasma and Material Science

    Science.gov (United States)

    Whyte, Dennis

    2012-03-01

    The boundary of magnetic confinement devices, from the pedestal through to the surrounding surfaces, encompasses an enormous range of plasma and material physics, and their integrated coupling. It is becoming clear that due to fundamental limits of plasma stability and material response the boundary will largely define the viability of an MFE reactor. However we face an enormous knowledge deficit in stepping from present devices and ITER towards a demonstration power plant. We outline the future of boundary research required to address this deficit. The boundary should be considered a multi-scale system of coupled plasma and material science regulated through the non-linear interface of the sheath. Measurement, theory and modeling across these scales are assessed. Dimensionless parameters, often used to organized core plasma transport on similarity arguments, can be extended to the boundary plasma, plasma-surface interactions and material response. This methodology suggests an intriguing way forward to prescribe and understand the boundary issues of an eventual reactor in intermediate devices. A particularly critical issue is that the physical chemistry of the material, which is mostly determined by the material temperature, has been too neglected; pointing to the requirement for boundary plasma experiments at appropriate material temperatures. Finally the boundary plasma requirements for quiescent heat exhaust and control of transient events, such as ELMs, will be examined.

  14. Teleconferences and Audiovisual Materials in Earth Science Education

    Science.gov (United States)

    Cortina, L. M.

    2007-05-01

    Unidad de Educacion Continua y a Distancia, Universidad Nacional Autonoma de Mexico, Coyoaca 04510 Mexico, MEXICO As stated in the special session description, 21st century undergraduate education has access to resources/experiences that go beyond university classrooms. However in some cases, resources may go largely unused and a number of factors may be cited such as logistic problems, restricted internet and telecommunication service access, miss-information, etc. We present and comment on our efforts and experiences at the National University of Mexico in a new unit dedicated to teleconferences and audio-visual materials. The unit forms part of the geosciences institutes, located in the central UNAM campus and campuses in other States. The use of teleconference in formal graduate and undergraduate education allows teachers and lecturers to distribute course material as in classrooms. Course by teleconference requires learning and student and teacher effort without physical contact, but they have access to multimedia available to support their exhibition. Well selected multimedia material allows the students to identify and recognize digital information to aid understanding natural phenomena integral to Earth Sciences. Cooperation with international partnerships providing access to new materials and experiences and to field practices will greatly add to our efforts. We will present specific examples of the experiences that we have at the Earth Sciences Postgraduate Program of UNAM with the use of technology in the education in geosciences.

  15. E-learning on the example of materials science

    Directory of Open Access Journals (Sweden)

    L.A. Dobrzański

    2008-07-01

    Full Text Available Purpose: The main aim of this article is to present the use of the Moodle educational platform in teaching Fundamentals of Materials Science and Metal Materials in the Institute of Engineering Materials and Biomaterials at Silesian University of Technology in Gliwice, and to analyse the efficacy of e-learning as the means of introducing education within a traditional model.Design/methodology/approach: This article contains the description of learning within the mixed mode, which is education embracing a face to face method and distance learning method for the first-year students. The comparison of the efficacy of mixed mode learning versus traditional learning will be presented.Findings: The efficient method of assisting remotely the e-learning students acquiring skills and knowledge at a varying pace has been developed, providing them with the personalised support.Research limitations/implications: Larger population of students should be tested so as to give measurable results, which would imply what needs to be worked on and what changes to introduce in order to improve the e-learning process.Originality/value: The course presented in this article confirms that e-learning enables the introduction of the new education formula, which may embrace advantages of traditional teaching and distance education as far as Materials Science is concerned.

  16. Components of abstracts in materials science and technology

    Directory of Open Access Journals (Sweden)

    Alenka Šauperl

    2009-01-01

    Full Text Available We investigated the structure of abstracts in Slovenian and international journals in the field of materials and technology. The aim of the study was to analyze the adherence of the abstracts published in Materials and Technology (MIT and Materials Science and Technology (MST to two different instructions for the preparation of abstracts (scheme based on ISO 214:1976 and Spanring system. 25 abstracts from each journal were divided into sentences. We tried to place the sentences into one of the categories of the above mentioned schemes. The research was a part of the postgraduate study in the Department of Library and Information Science and Book Studies (Faculty of Arts, Ljubljana in September and October 2008. There are no important differences between MIT and MST. Spanring system seems more appropriate for the field of materials and technology. The place and the time of the research should be added to abstracts and the Hu-bit category should be distributed into two parts: Hu-M (method and Hu-R (results. The recommended Spanring system should be harmonized with authors, who publish in these serials and the effect of the instructions should be analyzed, too.

  17. Ceramics Technology Project database: September 1991 summary report. [Materials for piston ring-cylinder liner for advanced heat/diesel engines

    Energy Technology Data Exchange (ETDEWEB)

    Keyes, B.L.P.

    1992-06-01

    The piston ring-cylinder liner area of the internal combustion engine must withstand very-high-temperature gradients, highly-corrosive environments, and constant friction. Improving the efficiency in the engine requires ring and cylinder liner materials that can survive this abusive environment and lubricants that resist decomposition at elevated temperatures. Wear and friction tests have been done on many material combinations in environments similar to actual use to find the right materials for the situation. This report covers tribology information produced from 1986 through July 1991 by Battelle columbus Laboratories, Caterpillar Inc., and Cummins Engine Company, Inc. for the Ceramic Technology Project (CTP). All data in this report were taken from the project's semiannual and bimonthly progress reports and cover base materials, coatings, and lubricants. The data, including test rig descriptions and material characterizations, are stored in the CTP database and are available to all project participants on request. Objective of this report is to make available the test results from these studies, but not to draw conclusions from these data.

  18. Recent trends in physics of material science and technology

    CERN Document Server

    Shrivastava, Keshav; Akhtar, Jamil

    2015-01-01

    This book discusses in detail the recent trends in Computational Physics, Nano-physics and Devices Technology. Numerous modern devices with very high accuracy, are explored In conditions such as longevity and extended possibilities to work in wide temperature and pressure ranges, aggressive media, etc. This edited volume presents 32 selected papers  of the 2013 International Conference on Science & Engineering in Mathematics, Chemistry and Physics . The book is divided into three  scientific Sections: (i) Computational Physics, (ii) Nanophysics and Technology, (iii) Devices and Systems and is addressed to Professors, post-graduate students, scientists and engineers taking part in R&D of nano-materials, ferro-piezoelectrics, computational Physics and devices system, and also different devices based on broad applications in different areas of modern science and technology.

  19. Annual Water Management Program - 1991 : Big Stone National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The proposed water management program for 1991 focuses on managing unit water levels to maintain habitat on Big Stone NWR. During the winter of 1990/91, cattails...

  20. Statistical analysis and interpolation of compositional data in materials science.

    Science.gov (United States)

    Pesenson, Misha Z; Suram, Santosh K; Gregoire, John M

    2015-02-01

    Compositional data are ubiquitous in chemistry and materials science: analysis of elements in multicomponent systems, combinatorial problems, etc., lead to data that are non-negative and sum to a constant (for example, atomic concentrations). The constant sum constraint restricts the sampling space to a simplex instead of the usual Euclidean space. Since statistical measures such as mean and standard deviation are defined for the Euclidean space, traditional correlation studies, multivariate analysis, and hypothesis testing may lead to erroneous dependencies and incorrect inferences when applied to compositional data. Furthermore, composition measurements that are used for data analytics may not include all of the elements contained in the material; that is, the measurements may be subcompositions of a higher-dimensional parent composition. Physically meaningful statistical analysis must yield results that are invariant under the number of composition elements, requiring the application of specialized statistical tools. We present specifics and subtleties of compositional data processing through discussion of illustrative examples. We introduce basic concepts, terminology, and methods required for the analysis of compositional data and utilize them for the spatial interpolation of composition in a sputtered thin film. The results demonstrate the importance of this mathematical framework for compositional data analysis (CDA) in the fields of materials science and chemistry.

  1. Chemistry and Materials Science Department annual report, 1988--1989

    Energy Technology Data Exchange (ETDEWEB)

    Borg, R.J.; Sugihara, T.T.; Cherniak, J.C.; Corey, C.W. [eds.

    1989-12-31

    This is the first annual report of the Chemistry & Materials Science (C&MS) Department. The principal purpose of this report is to provide a concise summary of our scientific and technical accomplishments for fiscal years 1988 and 1989. The report is also tended to become part of the archival record of the Department`s activities. We plan to publish future editions annually. The activities of the Department can be divided into three broad categories. First, C&MS staff are assigned by the matrix system to work directly in a program. These programmatic assignments typically involve short deadlines and critical time schedules. A second category is longer-term research and development in technologies important to Laboratory programs. The focus and direction of this technology-base work are generally determined by programmatic needs. Finally, the Department manages its own research program, mostly long-range in outlook and basic in orientation. These three categories are not mutually exclusive but form a continuum of technical activities. Representative examples of all three are included in this report. The principal subject matter of this report has been divided into six sections: Innovations in Analysis and Characterization, Advanced Materials, Metallurgical Science and Technology, Surfaces and Interfaces, Energetic Materials and Chemical Synthesis, and Energy-Related Research and Development.

  2. Living in a Materials World: Materials Science Engineering Professional Development for K-12 Educators

    Energy Technology Data Exchange (ETDEWEB)

    Anne Seifert; Louis Nadelson

    2011-06-01

    Advances in materials science are fundamental to technological developments and have broad societal impacs. For example, a cellular phone is composed of a polymer case, liquid crystal displays, LEDs, silicon chips, Ni-Cd batteries, resistors, capacitors, speakers, microphones all of which have required advances in materials science to be compacted into a phone which is typically smaller than a deck of cards. Like many technological developments, cellular phones have become a ubiquitous part of society, and yet most people know little about the materials science associated with their manufacture. The probable condition of constrained knowledge of materials science was the motivation for developing and offering a 20 hour fourday course called 'Living in a Materials World.' In addition, materials science provides a connection between our every day experiences and the work of scientists and engineers. The course was offered as part of a larger K-12 teacher professional development project and was a component of a week-long summer institute designed specifically for upper elementary and middle school teachers which included 20 hour content strands, and 12 hours of plenary sessions, planning, and collaborative sharing. The focus of the institute was on enhancing teacher content knowledge in STEM, their capacity for teaching using inquiry, their comfort and positive attitudes toward teaching STEM, their knowledge of how people learn, and strategies for integrating STEM throughout the curriculum. In addition to the summer institute the participating teachers were provided with a kit of about $300 worth of materials and equipment to use to implement the content they learned in their classrooms. As part of this professional development project the participants were required to design and implement 5 lesson plans with their students this fall and report on the results, as part of the continuing education course associated with the project. 'Living in a

  3. Technical Education Outreach in Materials Science and Technology Based on NASA's Materials Research

    Science.gov (United States)

    Jacobs, James A.

    2003-01-01

    The grant NAG-1 -2125, Technical Education Outreach in Materials Science and Technology, based on NASA s Materials Research, involves collaborative effort among the National Aeronautics and Space Administration s Langley Research Center (NASA-LaRC), Norfolk State University (NSU), national research centers, private industry, technical societies, colleges and universities. The collaboration aims to strengthen math, science and technology education by providing outreach related to materials science and technology (MST). The goal of the project is to transfer new developments from LaRC s Center for Excellence for Structures and Materials and other NASA materials research into technical education across the nation to provide educational outreach and strengthen technical education. To achieve this goal we are employing two main strategies: 1) development of the gateway website and 2) using the National Educators Workshop: Update in Engineering Materials, Science and Technology (NEW:Updates). We have also participated in a number of national projects, presented talks at technical meetings and published articles aimed at improving k-12 technical education. Through the three years of this project the NSU team developed the successful MST-Online site and continued to upgrade and update it as our limited resources permitted. Three annual NEW:Updates conducted from 2000 though 2002 overcame the challenges presented first by the September 11,2001 terrorist attacks and the slow U.S. economy and still managed to conduct very effective workshops and expand our outreach efforts. Plans began on NEW:Update 2003 to be hosted by NASA Langley as a part of the celebration of the Centennial of Controlled Flight.

  4. Low Gravity Materials Science Research for Space Exploration

    Science.gov (United States)

    Clinton, R. G., Jr.; Semmes, Edmund B.; Schlagheck, Ronald A.; Bassler, Julie A.; Cook, Mary Beth; Wargo, Michael J.; Sanders, Gerald B.; Marzwell, Neville I.

    2004-01-01

    On January 14, 2004, the President of the United States announced a new vision for the United States civil space program. The Administrator of the National Aeronautics and Space Administration (NASA) has the responsibility to implement this new vision. The President also created a Presidential Commission 'to obtain recommendations concerning implementation of the new vision for space exploration.' The President's Commission recognized that achieving the exploration objectives would require significant technical innovation, research, and development in focal areas defined as 'enabling technologies.' Among the 17 enabling technologies identified for initial focus were advanced structures; advanced power and propulsion; closed-loop life support and habitability; extravehicular activity system; autonomous systems and robotics; scientific data collection and analysis; biomedical risk mitigation; and planetary in situ resource utilization. The Commission also recommended realignment of NASA Headquarters organizations to support the vision for space exploration. NASA has aggressively responded in its planning to support the vision for space exploration and with the current considerations of the findings and recommendations from the Presidential Commission. This presentation will examine the transformation and realignment activities to support the vision for space exploration that are underway in the microgravity materials science program. The heritage of the microgravity materials science program, in the context of residence within the organizational structure of the Office of Biological and Physical Research, and thematic and sub-discipline based research content areas, will be briefly examined as the starting point for the ongoing transformation. Overviews of future research directions will be presented and the status of organizational restructuring at NASA Headquarters, with respect to influences on the microgravity materials science program, will be discussed

  5. 10th International School of Materials Science and Technology : Intercalation in Layered Materials "Ettore Majorana"

    CERN Document Server

    1986-01-01

    This volume is prepared from lecture notes for the course "Intercalation in Layered Materials" which was held at the Ettore Majorana Centre for Scientific Culture at Erice, Sicily in July, 1986, as part of the International School of Materials Science and Tech­ nology. The course itself consisted of formal tutorial lectures, workshops, and informal discussions. Lecture notes were prepared for the formal lectures, and short summaries of many of the workshop presentations were prepared. This volume is based on these lecture notes and research summaries. The material is addressed to advanced graduate students and postdoctoral researchers and assumes a background in basic solid state physics. The goals of this volume on Intercalation in Layered Materials include an introduc­ tion to the field for potential new participants, an in-depth and broad exposure for stu­ dents and young investigators already working in the field, a basis for cross-fertilization between workers on various layered host materials...

  6. Materials science symposium 'heavy ion science in tandem energy region'

    Energy Technology Data Exchange (ETDEWEB)

    Iwamoto, Akira; Yoshida, Tadashi; Takeuchi, Suehiro (eds.) [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2001-11-01

    The facility of the JAERI tandem accelerator and its booster has been contributing to obtain plenty of fruitful results in the fields of nuclear physics, nuclear chemistry, atomic and solid state physics and materials science, taking an advantage of its prominent performances of heavy ion acceleration. The previous meeting held in 1999 also offered an opportunity to scientists from all over the heavy ion science fields, including nuclear physics, solid state physics and cross-field physics to have active discussions. This meeting included oral presentations with a new plan and with a new scope of fields expected from now on, as an occasion for opening the 21st century in heavy ion science. The 50 of the presented papers are indexed individually. (J.P.N.)

  7. Multiscale paradigms in integrated computational materials science and engineering materials theory, modeling, and simulation for predictive design

    CERN Document Server

    Runge, Keith; Muralidharan, Krishna

    2016-01-01

    This book presents cutting-edge concepts, paradigms, and research highlights in the field of computational materials science and engineering, and provides a fresh, up-to-date perspective on solving present and future materials challenges. The chapters are written by not only pioneers in the fields of computational materials chemistry and materials science, but also experts in multi-scale modeling and simulation as applied to materials engineering. Pedagogical introductions to the different topics and continuity between the chapters are provided to ensure the appeal to a broad audience and to address the applicability of integrated computational materials science and engineering for solving real-world problems.

  8. A study of the source materials, depositional environments, mechanisms of generation and migration of oils in the Anadarko, Oklahoma. Progress report, September 15, 1990--September 14, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Philp, R.P.

    1990-04-20

    This report is for the final year of a three-year funded project. A new proposal has been submitted and it is hoped that funding will continue for another three years. It is felt that good progress is being made with our work on studying the oils and source rocks in the Anadarko Basin. Furthermore a number of associated projects have evolved during this period which have also produced many useful results and various analytical methods have been developed. In Appendix I lists of students totally or partially supported by this work plus various publications are given. It is hoped that these will testify to our productivity arising from the DOE support over the past few years.

  9. Multiple-probe scanning probe microscopes for nanoarchitectonic materials science

    Science.gov (United States)

    Nakayama, Tomonobu; Shingaya, Yoshitaka; Aono, Masakazu

    2016-11-01

    Nanoarchitectonic systems are of interest for utilizing a vast range of nanoscale materials for future applications requiring a huge number of elemental nanocomponents. To explore the science and technology of nanoarchitectonics, advanced characterization tools that can deal with both nanoscale objects and macroscopically extended nanosystems are demanded. Multiple-probe scanning probe microscopes (MP-SPMs) are powerful tools that meet this demand because they take the advantages of conventional scanning probe microscopes and realize atomically precise electrical measurements, which cannot be done with conventional microprobing systems widely used in characterizing materials and devices. Furthermore, an MP-SPM can be used to operate some nanoarchitectonic systems. In this review, we overview the indispensable features of MP-SPMs together with the past, present and future of MP-SPM technology.

  10. Materials science of Mg-Ni-based new hydrides

    Energy Technology Data Exchange (ETDEWEB)

    Orimo, S.; Fujii, H. [Hiroshima Univ. (Japan). Faculty of Integrated Arts and Sciences

    2001-02-01

    One of the advantageous functional properties of Mg alloys (or compounds) is to exhibit the reversible hydriding reaction. In this paper, we present our systematic studies regarding the relationship between nanometer- or atomistic-scale structures and the specific hydriding properties of the Mg-Ni binary system, such as(1) nanostructured (n)-Mg{sub 2}Ni, (2) a mixture of n-Mg{sub 2}Ni and amorphous (a)-MgNi,(3) pure a-MgNi, and(4) n-MgNi{sub 2}. Further studies on(5) an a-MgNi-based system for clarifying the effect of the short-range ordering on the structural and hydriding properties and(6) a MgNi{sub 2}-based system for synthesizing the new Laves phase structure are also presented. The materials science of Mg-Ni-based new hydrides will provide indispensable knowledge for practically developing the Mg alloys as hydrogen-storage materials. (orig.)

  11. The material science of minimally invasive esthetic restorations.

    Science.gov (United States)

    Nový, Brian B; Fuller, Cameron E

    2008-01-01

    The term esthetic dentistry usually conjures up mental images of porcelain crowns and veneers. To some dentists, the term minimally invasive dentistry evokes thoughts of observing early lesions, and postponing treatment until lesions are closer to the pulp. (The World Congress of Minimally Invasive Dentistry defines minimally invasive dentistry as those techniques which respect health, function, and esthetics of oral tissue by preventing disease from occurring, or intercepting its progress with minimal tissue loss.) It would seem these two niches within dentistry are on opposite ends of the spectrum; however, composite resin and glass ionomer restorative materials unite these two ideologies. Understanding the limitations, benefits, and science behind each material allows clinicians to produce highly esthetic restorations that can resist future decay, internally remineralize the tooth, and help protect adjacent teeth from cariogenic attack.

  12. Materials Science Constraints on the Development of Aluminium Reduction Cells

    Science.gov (United States)

    Metson, James; McIntosh, Grant; Etzion, Ronny

    The Hall-Heroult process for the production of Aluminium metal is some 125 years old. The process is energy constrained by the need to shed around half of the (electrical) energy supplied to the cell as waste heat. The molten cryolite electrolyte is sufficiently aggressive that the only reliable method of protecting the side wall of the cell is to maintain a frozen layer of electrolyte at the hot face of the sidewall. Thus the lack of a cryolite resistant sidewall is but one of several materials science constraints which still limit the energy efficiency of the process. An inert anode and non-consumable cathode are also significant challenges which limit cell life and energy efficiency. Thus there are major challenges in both materials development and new conceptual cell designs to improve the efficiency of this process.

  13. Materials Sciences Programs. Fiscal Year 1980, Office of Basic Energy Sciences

    Energy Technology Data Exchange (ETDEWEB)

    1980-09-01

    This report provides a convenient compilation index of the DOE Materials Sciences Division programs. This compilation is intended for use by administrators, managers, and scientists to help coordinate research and as an aid in selecting new programs and is divided into Sections A and B, listing all the projects, Section C, a summary of funding levels, and Section D, an index (the investigator index is in two parts - laboratory and contract research).

  14. Object-Oriented Heterogeneous Database for Materials Science

    Directory of Open Access Journals (Sweden)

    David Hansen

    1992-01-01

    Full Text Available As a part of the scientific database research underway at the Oregon Graduate Institute, we are collaborating with materials scientists in the research and development of an extensible modeling and computation environment for materials science. Materials scientists are prolific users of computers for scientific research. Modeling techniques and algorithms are well known and refined, and computerized databases of chemical and physical property data abound. However, applications are typically developed in isolation, using information models specifically tailored for the needs of each application. Furthermore, available computerized databases in the form of CDs and on-line information services are still accessed manually by the scientist in an off-line fashion. Thus researchers are repeatedly constructing and populating new custom databases for each application. The goal of our research is to bridge this gulf between applications and sources of data. We believe that object-oriented technology in general and data-bases in particular, provide powerful tools for transparently bridging the gap between programs and data. An object-oriented database that not only manages data generated by user applications, but also provides access to relevant external data sources can be used to bridge this gap. An object-oriented database for materials science data is described that brings together data from heterogeneous non-object-oriented sources and formats, and presents the user with a single, uniform object-oriented schema that transparently integrates these diverse databases. A unique multilevel architecture is presented that provides a mechanism for efficiently accessing both heterogeneous external data sources and new data stored within the database.

  15. Reconstructing the history of science education through its materiality

    Directory of Open Access Journals (Sweden)

    Francesca Davida Pizzigoni

    2016-04-01

    Full Text Available “Things of Science” is a project promoted in 2014 by the Polytechnic of Turin in partnership with several other scientific territorial institutions that intended to survey and study the educational scientific historical heritage of schools in Turin. It aims to derive from material traces some testimonies of teaching science in different historical periods. Through the project, over 47.000 historical teaching aids have been made available representing a significant basis for numerous studies and insights as well as a safeguard action towards this important source for scientific research in terms of the materiality of the school and in particular of science in school. Ricostruire la storia della didattica scientifica attraverso la sua materialità“Cose di Scienza” è un progetto promosso nel 2014 dal Politecnico di Torino in partenariato con diverse altre realtà scientifiche territoriali che ha inteso censire e studiare il patrimonio didattico scientifico storico presente nelle scuole torinesi, al fine di ricavare dalle tracce materiali alcune testimonianze di didattica della scienza nei diversi periodi storici. Attraverso il progetto sono stati reperiti oltre 47.000 supporti didattici storici che costituiscono da un lato una significativa base per numerosi studi e approfondimenti, e dall’altro una azione di salvaguardia verso questa importante fonte per la ricerca scientifica costituita dalla materialità della scuola e in particolare della scienza a scuola.

  16. Customization of Curriculum Materials in Science: Motives, Challenges, and Opportunities

    Science.gov (United States)

    Romine, William L.; Banerjee, Tanvi

    2012-02-01

    Exemplary science instructors use inquiry to tailor content to student's learning needs; traditional textbooks treat science as a set of facts and a rigid curriculum. Publishers now allow instructors to compile pieces of published and/or self-authored text to make custom textbooks. This brings numerous advantages, including the ability to produce smaller, cheaper text and added flexibility on the teaching models used. Moreover, the internet allows instructors to decentralize textbooks through easy access to educational objects such as audiovisual simulations, individual textbook chapters, and scholarly research articles. However, these new opportunities bring with them new problems. With educational materials easy to access, manipulate and duplicate, it is necessary to define intellectual property boundaries, and the need to secure documents against unlawful copying and use is paramount. Engineers are developing and enhancing information embedding technologies, including steganography, cryptography, watermarking, and fingerprinting, to label and protect intellectual property. While these are showing their utility in securing information, hackers continue to find loop holes in these protection schemes, forcing engineers to constantly assess the algorithms to make them as secure as possible. As newer technologies rise, people still question whether custom publishing is desirable. Many instructors see the process as complex, costly, and substandard in comparison to using traditional text. Publishing companies are working to improve attitudes through advertising. What lacks is peer reviewed evidence showing that custom publishing improves learning. Studies exploring the effect of custom course materials on student attitude and learning outcomes are a necessary next step.

  17. Transmission electron microscopy a textbook for materials science

    CERN Document Server

    Williams, David B

    1996-01-01

    Electron microscopy has revolutionized our understanding the extraordinary intellectual demands required of the mi­ of materials by completing the processing-structure-prop­ croscopist in order to do the job properly: crystallography, erties links down to atomistic levels. It now is even possible diffraction, image contrast, inelastic scattering events, and to tailor the microstructure (and meso structure ) of materials spectroscopy. Remember, these used to be fields in them­ to achieve specific sets of properties; the extraordinary abili­ selves. Today, one has to understand the fundamentals ties of modem transmission electron microscopy-TEM­ of all of these areas before one can hope to tackle signifi­ instruments to provide almost all of the structural, phase, cant problems in materials science. TEM is a technique of and crystallographic data allow us to accomplish this feat. characterizing materials down to the atomic limits. It must Therefore, it is obvious that any curriculum in modem mate­ be use...

  18. THE WOMEN’S STATE POLICY IN THE RUSSIAN FEDERATION IN THE 1990S (using the materials of the Krasnoyarsk region

    Directory of Open Access Journals (Sweden)

    Albina Urjevna Nikolaeva

    2014-08-01

    Full Text Available Actuality of studying women’s state policy problems in the 1990s in Russia is determined by political, socio-economic and cultural reforms because political organization and social structure of the society have changed. This caused the changing of women role in policy, economics and family.The aim of work is to find out the state policy impact to women’s position in the 1990s.In the article the following methods were used: historical approach and objectivism. Theoretical and methodological basis is stratification methodology, theoretical positions of gender approach.The results of work are analyses of the women’s state policy impact to socio-demographic situation in the Krasnoyarsk region. In the scientific usage new materials and materials of local archives were introduced.The study of women’s position in the 1990s enables to make a conclusion that it is necessary to work out state measures to overcome the demographic crises caused by socio-economic reforms during the “Perestroyka” Period.

  19. Evaluation of Online Teacher and Student Materials for the Framework for K-12 Science Education Science and Engineering Crosscutting Concepts

    Science.gov (United States)

    Schwab, Patrick

    2013-01-01

    The National Research Council developed and published the "Framework for K-12 Science Education," a new set of concepts that many states were planning on adopting. Part of this new endeavor included a set of science and engineering crosscutting concepts to be incorporated into science materials and activities, a first in science…

  20. Chemistry and Materials Science Directorate Annual Report 2003

    Energy Technology Data Exchange (ETDEWEB)

    Diaz de la Rubia, T; Shang, S P; Kitrinos, G A; Fluss, M; Westbrook, C; Rennie, G

    2004-04-21

    Evolving challenges and solid accomplishments define the year 2003 for us. Our scientific breakthroughs validate our strategic directions and reaffirm our critical role in fulfilling the Laboratory's missions. Our growth continues in new research projects and significant new programmatic support. Our mission is clear: to enable the Laboratory to accomplish its primary mission through excellence in the chemical and materials sciences. The directorate's common theme and determination has remained constant: Deliver on our commitments, while anticipating and capitalizing on opportunities through innovation in science and technology. In this, the 2003 Annual Report, we describe how our science is built around a strategic plan with four organizing themes, each with key scientific accomplishments by our staff and collaborators. Our strategic plan is synergistic with the Laboratory's Long-Range Science and Technology Plan, which identifies six areas of institutional research and development strategy. This 2003 CMS Annual Report is organized into two major sections: research themes and dynamic teams. The research-theme section addresses challenges, achievements, and new frontiers within each of the four research themes. The dynamic-teams section illustrates the directorate's organizational structure of divisions, centers, and institutes that supports a team environment across disciplinary and institutional boundaries. The research presented gives substantive examples of how we are proceeding in each of these four theme areas and how they are aligned with the institutional strategy. Our organizational structure offers an environment of collaborative problem-solving opportunities, an environment that attracts and retains the best and the brightest from across the Laboratory and around the world.

  1. Pre-Service Science Teachers Views on STEM Materials and STEM Competition in Instructional Technologies and Material Development Course

    Science.gov (United States)

    Cetin, Ali; Balta, Nuri

    2017-01-01

    This qualitative study was designed to introduce STEM (Science, Technology, Engineering, Mathematics) activities to preservice science teachers and identify their views about STEM materials. In this context, a competition was organized with 42 preservice science teachers (13 male- 29 female) who took Instructional Technologies and Material…

  2. Bipolar electrochemistry: from materials science to motion and beyond.

    Science.gov (United States)

    Loget, Gabriel; Zigah, Dodzi; Bouffier, Laurent; Sojic, Neso; Kuhn, Alexander

    2013-11-19

    Bipolar electrochemistry, a phenomenon which generates an asymmetric reactivity on the surface of conductive objects in a wireless manner, is an important concept for many purposes, from analysis to materials science as well as for the generation of motion. Chemists have known the basic concept for a long time, but it has recently attracted additional attention, especially in the context of micro- and nanoscience. In this Account, we introduce the fundamentals of bipolar electrochemistry and illustrate its recent applications, with a particular focus on the fields of materials science and dynamic systems. Janus particles, named after the Roman god depicted with two faces, are currently in the heart of many original investigations. These objects exhibit different physicochemical properties on two opposite sides. This makes them a unique class of materials, showing interesting features. They have received increasing attention from the materials science community, since they can be used for a large variety of applications, ranging from sensing to photosplitting of water. So far the great majority of methods developed for the generation of Janus particles breaks the symmetry by using interfaces or surfaces. The consequence is often a low time-space yield, which limits their large scale production. In this context, chemists have successfully used bipolar electrodeposition to break the symmetry. This provides a single-step technique for the bulk production of Janus particles with a high control over the deposit structure and morphology, as well as a significantly improved yield. In this context, researchers have used the bipolar electrodeposition of molecular layers, metals, semiconductors, and insulators at one or both reactive poles of bipolar electrodes to generate a wide range of Janus particles with different size, composition and shape. In using bipolar electrochemistry as a driving force for generating motion, its intrinsic asymmetric reactivity is again the

  3. Computed Tomography Support for Microgravity Materials Science Experiments

    Science.gov (United States)

    Gillies, Donald C.; Engel, H. Peter; Whitaker, Ann F. (Technical Monitor)

    2001-01-01

    The accurate measurement of density in both liquid and solid samples is of considerable interest to Principal Investigators with materials science experiments slated for the ISS. The work to be described is an innovative application of a conventional industrial nondestructive evaluation instrument. Traditional applications of industrial computed tomography (CT) rely on reconstructing cross sections of large structures to provide two-dimensional planar views which can identify defects such as porosity, or other material anomalies. This has been done on microgravity materials science experiments to check the integrity of ampoule-cartridge assemblies for safety purposes. With a substantially monoenergetic flux, as can be obtained with a radioactive cobalt source, there will be a direct correlation between absorption and density. Under such conditions it then becomes possible to make accurate measurements of density throughout a sample, and even when the sample itself is enclosed within a furnace and a safety required cartridge. Such a system has been installed at Kennedy Space Center (KSC) and is available to PIs to examine samples before and after flight. The CT system is being used to provide density information for two purposes. Firstly, the determination of density changes from liquid to solid is vital information to the PI for purposes of modeling the solidification behavior of his sample, and to engineers who have to design containment ampoules and must allow for shrinkage and other volume changes that may occur during processing. While such information can be obtained by pycnometric measurements, the possibility of using a furnace installed on the CT system enables one to examine potentially dangerous materials having high vapor pressures, while not needing visible access to the material. In addition, uniform temperature can readily be obtained, and the system can be controlled to ramp up, hold, and ramp down while collecting data over a wide range of

  4. Computed Tomography Support for Microgravity Materials Science Experiments

    Science.gov (United States)

    Gillies, Donald C.; Engel, H. Peter; Whitaker, Ann F. (Technical Monitor)

    2001-01-01

    The accurate measurement of density in both liquid and solid samples is of considerable interest to Principal Investigators with materials science experiments slated for the ISS. The work to be described is an innovative application of a conventional industrial nondestructive evaluation instrument. Traditional applications of industrial computed tomography (CT) rely on reconstructing cross sections of large structures to provide two-dimensional planar views which can identify defects such as porosity, or other material anomalies. This has been done on microgravity materials science experiments to check the integrity of ampoule-cartridge assemblies for safety purposes. With a substantially monoenergetic flux, as can be obtained with a radioactive cobalt source, there will be a direct correlation between absorption and density. Under such conditions it then becomes possible to make accurate measurements of density throughout a sample, and even when the sample itself is enclosed within a furnace and a safety required cartridge. Such a system has been installed at Kennedy Space Center (KSC) and is available to PIs to examine samples before and after flight. The CT system is being used to provide density information for two purposes. Firstly, the determination of density changes from liquid to solid is vital information to the PI for purposes of modeling the solidification behavior of his sample, and to engineers who have to design containment ampoules and must allow for shrinkage and other volume changes that may occur during processing. While such information can be obtained by pycnometric measurements, the possibility of using a furnace installed on the CT system enables one to examine potentially dangerous materials having high vapor pressures, while not needing visible access to the material. In addition, uniform temperature can readily be obtained, and the system can be controlled to ramp up, hold, and ramp down while collecting data over a wide range of

  5. Teachers and Science Curriculum Materials: Where We Are and Where We Need to Go

    Science.gov (United States)

    Davis, Elizabeth A.; Janssen, Fred J. J. M.; Van Driel, Jan H.

    2016-01-01

    Curriculum materials serve as a key conceptual tool for science teachers, and better understanding how science teachers use these tools could help to improve both curriculum design and theory related to teacher learning and decision-making. The authors review the literature on teachers and science curriculum materials. The review is organised…

  6. Trends in the Use of Supplementary Materials in Environmental Science Journals

    Science.gov (United States)

    Kenyon, Jeremy; Sprague, Nancy R.

    2014-01-01

    Our research examined the use of supplementary materials in six environmental science disciplines: atmospheric sciences, biology, fisheries, forestry, geology, and plant sciences. Ten key journals were selected from each of these disciplines and the number of supplementary materials, such as data files or videos, in each issue was noted over a…

  7. Trends in the Use of Supplementary Materials in Environmental Science Journals

    Science.gov (United States)

    Kenyon, Jeremy; Sprague, Nancy R.

    2014-01-01

    Our research examined the use of supplementary materials in six environmental science disciplines: atmospheric sciences, biology, fisheries, forestry, geology, and plant sciences. Ten key journals were selected from each of these disciplines and the number of supplementary materials, such as data files or videos, in each issue was noted over a…

  8. 75 FR 39664 - Grant of Authority For Subzone Status Materials Science Technology, Inc. (Specialty Elastomers...

    Science.gov (United States)

    2010-07-12

    ... Foreign-Trade Zones Board Grant of Authority For Subzone Status Materials Science Technology, Inc... Materials Science Technology, Inc., located in Conroe, Texas, (FTZ Docket 46-2009, filed October 27, 2009... Science Technology, Inc., located in Conroe, Texas (Subzone 265C), as described in the application...

  9. To Kit or Not to Kit? Evaluating and Implementing Science Materials and Resources

    Science.gov (United States)

    Schiller, Ellen; Melin, Jacque; Bair, Mary

    2016-01-01

    With the release of the "Next Generation Science Standards," many schools are reexamining the science materials they are using. Textbook companies and kit developers are eager to meet the demand for "NGSS"-aligned teaching materials. Teacher may have been asked to serve on a science curriculum committee, or to evaluate current…

  10. Remote Monitoring and Controlling of a Material Science Experiment

    Directory of Open Access Journals (Sweden)

    Wattanapong KURDTHONGMEE

    2004-01-01

    Full Text Available The computer industry’s remarkable ability to integrate more transistors into a small area of silicon is increasing the intelligence of our devices and simultaneously decreasing their cost and power consumption. In addition, the proliferation of wired and wireless networking spurred by the development of the world-wide web and demands for mobile access are enabling low-cost connectivity among computing devices. It is now possible to connect every computing device into a true world-wide web that connects the physical world of sensors and actuators to the virtual world of our information utilities and services. This paper examines an application of an integration of the intelligent chip with the network connectivity into a material science experiment designed to study the sorption of woods. The intelligence and network connectivity infrastructures of the system eliminate laborious tasks previously required during experiment control and data collection processes.

  11. Material Science Activities for Fusion Reactors in Kazakhstan

    Energy Technology Data Exchange (ETDEWEB)

    Tazhibayeva, I.; Kenzhin, E.; Kulsartov, T. [Institute of Atomic Energy NNC RK, Kurchatov (Kazakhstan); Shestakov, V. [Kazakhstan State University, Almaty (Kazakhstan); Chikhray, Y. [Kazakh National University, Kourmangazy 15, app.lO, 480100 Almaty (Kazakhstan); Azizov, E. [TRINITI, Troitsk (Russian Federation); Filatov, O. [Effremov Institute, Saint Petersburg (Russian Federation); Chernov, V.M. [Bochvar Institute of Inorganic Materials, P.O. Box 369, 123060 Moscow (Russian Federation)

    2007-07-01

    techniques for prevention of failures of intra-chamber components. High parameters of power loads (up to 20 MWt/m{sup 2}), wide range of used techniques and diagnostics allow for carrying out the studies and tests in divertor volume and at first wall, including mockups of DEMO vanadium module and lithium divertor module on the basis of capillary-porous system. The paper contains description of tokamak KTM features and material science program in support of creation of experimental modules for DEMO, ITER and fusion power reactors. (authors)

  12. Diffraction phase microscopy: monitoring nanoscale dynamics in materials science [invited].

    Science.gov (United States)

    Edwards, Chris; Zhou, Renjie; Hwang, Suk-Won; McKeown, Steven J; Wang, Kaiyuan; Bhaduri, Basanta; Ganti, Raman; Yunker, Peter J; Yodh, Arjun G; Rogers, John A; Goddard, Lynford L; Popescu, Gabriel

    2014-09-20

    Quantitative phase imaging (QPI) utilizes the fact that the phase of an imaging field is much more sensitive than its amplitude. As fields from the source interact with the specimen, local variations in the phase front are produced, which provide structural information about the sample and can be used to reconstruct its topography with nanometer accuracy. QPI techniques do not require staining or coating of the specimen and are therefore nondestructive. Diffraction phase microscopy (DPM) combines many of the best attributes of current QPI methods; its compact configuration uses a common-path off-axis geometry which realizes the benefits of both low noise and single-shot imaging. This unique collection of features enables the DPM system to monitor, at the nanoscale, a wide variety of phenomena in their natural environments. Over the past decade, QPI techniques have become ubiquitous in biological studies and a recent effort has been made to extend QPI to materials science applications. We briefly review several recent studies which include real-time monitoring of wet etching, photochemical etching, surface wetting and evaporation, dissolution of biodegradable electronic materials, and the expansion and deformation of thin-films. We also discuss recent advances in semiconductor wafer defect detection using QPI.

  13. A materials science vision of extracellular matrix mineralization

    Science.gov (United States)

    Reznikov, N.; Steele, J. A. M.; Fratzl, P.; Stevens, M. M.

    2016-08-01

    From an engineering perspective, skeletal tissues are remarkable structures because they are lightweight, stiff and tough, yet produced at ambient conditions. The biomechanical success of skeletal tissues is largely attributable to the process of biomineralization — a tightly regulated, cell-driven formation of billions of inorganic nanocrystals formed from ions found abundantly in body fluids. In this Review, we discuss nature's strategies to produce and sustain appropriate biomechanical properties in mineralizing (by the promotion of mineralization) and non-mineralizing (by the inhibition of mineralization) tissues. We review how perturbations of biomineralization are controlled over a continuum that spans from the desirable (or defective in disease) mineralization of the skeleton to pathological cardiovascular mineralization, and to mineralization of bioengineered constructs. A materials science vision of mineralization is presented with an emphasis on the micro- and nanostructure of mineralized tissues recently revealed by state-of-the-art analytical methods, and on how biomineralization-inspired designs are influencing the field of synthetic materials.

  14. Advances in materials science, metals and ceramics division. Triannual progress report, June-September 1980

    Energy Technology Data Exchange (ETDEWEB)

    Truhan, J.J.; Hopper, R.W.; Gordon, K.M. (eds.)

    1980-10-28

    Information is presented concerning the magnetic fusion energy program; the laser fusion energy program; geothermal research; nuclear waste management; Office of Basic Energy Sciences (OBES) research; diffusion in silicate minerals; chemistry research resources; and chemistry and materials science research.

  15. 75 FR 69078 - Workshop To Review Draft Materials for the Lead (Pb) Integrated Science Assessment (ISA)

    Science.gov (United States)

    2010-11-10

    ... AGENCY Workshop To Review Draft Materials for the Lead (Pb) Integrated Science Assessment (ISA) AGENCY... a workshop to evaluate initial draft materials for the Pb Integrated Science Assessment (ISA) is... the scientific content of initial draft materials or sections for the draft ISA. Workshop...

  16. Elementary Students' Learning of Materials Science Practices through Instruction Based on Engineering Design Tasks

    Science.gov (United States)

    Wendell, Kristen Bethke; Lee, Hee-Sun

    2010-01-01

    Materials science, which entails the practices of selecting, testing, and characterizing materials, is an important discipline within the study of matter. This paper examines how third grade students' materials science performance changes over the course of instruction based on an engineering design challenge. We conducted a case study of nine…

  17. Educators Guide to Free Science Materials, 11th Annual Edition--1970.

    Science.gov (United States)

    Saterstrom, Mary Horkheimer; Renner, John W.

    This eleventh edition of the Educators Guide to Free Science Materials is devoted exclusively to free science materials, based on the cross-media approach. It is designed to provide a continuing means of identifying existing materials that are currently available. It is a complete, up-to-date, annotated schedule of selected free or inexpensive…

  18. Chemistry {ampersand} Materials Science progress report summary of selected research and development topics, FY97

    Energy Technology Data Exchange (ETDEWEB)

    Newkirk, L.

    1997-12-01

    This report contains summaries of research performed in the Chemistry and Materials Science division. Topics include Metals and Ceramics, High Explosives, Organic Synthesis, Instrument Development, and other topics.

  19. AN ANTHOLOGY OF THE DISTINGUISHED ACHIEVEMENTS IN SCIENCE AND TECHNIQUE. PART 35: NOBEL PRIZE LAUREATES IN PHYSICS FOR 1990-1994

    Directory of Open Access Journals (Sweden)

    M. I. Baranov

    2016-12-01

    Full Text Available Purpose. Implementation of brief analytical review of the distinguished scientific achievements of the world scientists-physicists, awarded the Nobel Prize in physics for period 1990-1994. Methodology. Scientific methods of collection, analysis and analytical treatment of scientific and technical information of world level in area physics of elementary particles, physics of high energies, of astrophysics, of modern theoretical and experimental physics. Results. The brief analytical review of the scientific openings and distinguished achievements of scientists-physicists is resulted in area of modern physical and technical problems which were marked the Nobel Prize in physics for period 1990-1994. Originality. Systematization is executed with exposition in the short concentrated form of the known scientific and technical materials, devoted pioneer researches results on dispersion of relativism electrons on protons (neutrons, to opening of likenesses of physics of hard matter and physics of the condensed state of matter, creation of revolutionary detector of elementary particles, to opening of new pulsars and new possibilities in the study of gravitation, to creation of neutron spectroscopy and method of neutron diffraction. Practical value. Popularization and deepening of scientific and technical knowledges for students, engineer and technical specialists and research workers in area of modern theoretical and experimental physics, extending their scientific range of interests and cooperant further development of scientific and technical progress in human society.

  20. Fossil Energy Program semiannual progress report, April 1990-- September 1990

    Energy Technology Data Exchange (ETDEWEB)

    Judkins, R.R.

    1991-09-01

    This report covers progress made during the period April 1, 1990, through September 30, 1990, for research and development projects that contribute to the advancement of various fossil energy technologies. Topics discussed include: ceramics and composite materials R D, new alloys, corrosion and erosion research, coal conversion development, mild gasification. (VC)

  1. Fossil Energy Program semiannual progress report, April 1990-- September 1990

    Energy Technology Data Exchange (ETDEWEB)

    Judkins, R.R.

    1991-09-01

    This report covers progress made during the period April 1, 1990, through September 30, 1990, for research and development projects that contribute to the advancement of various fossil energy technologies. Topics discussed include: ceramics and composite materials R&D, new alloys, corrosion and erosion research, coal conversion development, mild gasification. (VC)

  2. NSF 1990 Plan

    Science.gov (United States)

    Jones, R.

    The National Science Foundation has released its Fiscal Year 1990 Current Plan, making expected cuts in some of the activities it supports. These cuts come on the heels of the reduction of grant and cooperative agreement increments by 2% from their originally committed amounts.NSF started with the budget request for FY 1990, subtracted the amounts cut by Congress, Gramm-Rudman-Hollings sequestration, and the across-the-board reductions for the war on drugs, and then calculated an overall funding increase of 8% over FY 1989. Funding for research and related activities was “particularly hard hit,” NSF said, and will increase by only 5%. The increase is 6% when the amount for academic research facilities is included. (That amount would have been lower had not money been reallocated into academic research facilities that was to have been used to build 10-12 new science and technology centers.)

  3. U.S.-Japan Workshop on Smart/Intelligent Materials and Systems, Honolulu, HI, Mar. 19-23, 1990, Proceedings

    Science.gov (United States)

    Ahmad, Iqbal (Editor); Crowson, Andrews (Editor); Rogers, Craig A. (Editor); Aizawa, Masuo (Editor)

    1990-01-01

    Topics presented include the concept of intelligent materials, the molecular engineering of channel proteins, the prospects, limitations, and requirements of intelligent micro motion systems, the modeling of a shape memory integrated actuator for vibration control of large space structures, and intelligent materials for future electronics. Also presented are the slewing of an active structure, the health monitoring of control system components, the numerical modeling of the microstructure of crystals with symmetry-related variants, and the intelligent material system concept.

  4. Forging the Solution to the Energy Challenge: The Role of Materials Science and Materials Scientists

    Science.gov (United States)

    Wadsworth, Jeffrey

    2010-05-01

    The energy challenge is central to the most important strategic problems facing the United States and the world. It is increasingly clear that even large-scale deployments of the best technologies available today cannot meet the rising energy demands of a growing world population. Achieving a secure and sustainable energy future will require full utilization of, and substantial improvements in, a comprehensive portfolio of energy systems and technologies. This goal is complicated by several factors. First, energy strategies are inextricably linked to national security and health issues. Second, in developing and deploying energy technologies, it is vital to consider not only environmental issues, such as global climate change, but also economic considerations, which strongly influence both public and political views on energy policy. Third, a significant and sustained effort in basic and applied research and development (R&D) will be required to deliver the innovations needed to ensure a desirable energy future. Innovations in materials science and engineering are especially needed to overcome the limits of essentially all energy technologies. A wealth of historical evidence demonstrates that such innovations are also the key to economic prosperity. From the development of the earliest cities around flint-trading centers, to the Industrial Revolution, to today’s silicon-based global economy, the advantage goes to those who lead in exploiting materials. I view our challenge by considering the rate of innovation and the transition of discovery to the marketplace as the relationship among R&D investment, a skilled and talented workforce, business innovations, and the activities of competitors. Most disturbing in analyzing this relationship is the need for trained workers in science, technology, engineering, and mathematics (STEM). To develop the STEM workforce needed for innovation, we need sustainable, positive change in STEM education at all levels from preschool

  5. Applications of density functional theory in materials science and engineering

    Science.gov (United States)

    Alvarado, Manuel, Jr.

    Density Functional Theory (DFT) is a powerful tool that can be used to model various systems in materials science. Our research applies DFT to two problems of interest. First, an organic/inorganic complex dye system known as a Mayan pigment is modeled to determine chemical binding sites, verifying each model with physical data such as UV/Vis spectra. Preliminary studies on palygorskite-based mayan pigments (mayacrom blue, mayacrom purple) show excellent agreement with experimental studies when using a dimer dye geometry binding with tetrahedrally-coordinated aluminum impurity sites in palygorksite. This approach is applied to a sepiolite-based organic/inorganic dye system using thioindigo attached to a tetrahedral aluminum impurity site with an additional aluminum impurity site in close proximity to the binding site. As a second application of DFT, various grain orientations in beta-Sn are modeled under imposed strains in order to calculate elastic properties of this system. These calculations are intended to clarify discrepancies in published, experimental crystal compliance values.

  6. Progress on research of materials science and biotechnology by ion beam application

    Energy Technology Data Exchange (ETDEWEB)

    Ishigaki, Isao [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

    1997-03-01

    Research of materials science and biotechnology by ion beam application in Takasaki Establishment was reviewed. Especially, the recent progresses of research on semiconductors in space, creation of new functional materials and topics in biotechnology were reported. (author)

  7. Advances in materials science, Metals and Ceramics Division. Triannual progress report, October 1979-January 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-03-31

    Progress is summarized concerning magnetic fusion energy materials, laser fusion energy, aluminium-air battery and vehicle, geothermal research, oil-shale research, nuclear waste management, office of basic energy sciences research, and materials research notes. (FS)

  8. Information technologies and software packages for education of specialists in materials science [In Russian

    NARCIS (Netherlands)

    V. Krzhizhanovskaya; S. Ryaboshuk

    2009-01-01

    This paper presents methodological materials, interactive text-books and software packages developed and extensively used for education of specialists in materials science. These virtual laboratories for education and research are equipped with tutorials and software environment for modeling complex

  9. Materials science symposium 'heavy ion science in tandem energy region'

    Energy Technology Data Exchange (ETDEWEB)

    Iwamoto, Akira; Yoshida, Tadashi; Takeuchi, Suehiro [eds.

    2000-01-01

    The tandem accelerator established at Japan Atomic Energy Research Institute (JAERI) in 1982 has been one of the most prominent electrostatic accelerators in the world. The accelerator has been serving for many researches planned by not only JAERI staff but also researchers of universities and national institutes. After the completion of the tandem booster in 1993, four times higher beam energy became available. These two facilities, the tandem accelerator and the booster, made great strides in heavy ion physics and a lot of achievements have been accumulated until now. The research departments of JAERI were reformed in 1998, and the accelerators section came under the Department of Materials Science. On this reform of the research system, the symposium 'Heavy Ion Science in Tandem Energy Region' was held in cooperation with nuclear and solid state physicists although there has been no such symposium for many years. The symposium was expected to stimulate novel development in both nuclear and solid state physics, and also interdisciplinary physics between nuclear and solid state physics. The 68 papers are indexed individually. (J.P.N.)

  10. Future Directions for Selected Topics in Physics and Materials Science

    Science.gov (United States)

    2012-07-12

    in the last decade? • New materials: (-materials (CNTs, graphene ) Correlated solids/oxides Metamaterials Superatoms/nanodroplets Highly spin...nanostructured materials, where the best multiferroics might be metamaterials . In addition to this important area, other types of materials that can...rather is engineered by purposeful nanostructuring. One of the more interesting metamaterials is the negative index of refraction materials that can

  11. Bayer MaterialScience Is Committed to PC Market in China

    Institute of Scientific and Technical Information of China (English)

    Lily Wang

    2007-01-01

    @@ Bayer MaterialScience' Business Unit Polycarbonates is firmly committed to its customers in China and the wider Asia Pacific region. On May 22nd, at the Chinaplas 2007 exhibition in Guangzhou, Bayer MaterialScience announced further steps of its strategy aimed at improving its responsiveness to customer needs.

  12. Framework for Reducing Teaching Challenges Relating to Improvisation of Science Education Equipment and Materials in Schools

    Science.gov (United States)

    Akuma, Fru Vitalis; Callaghan, Ronel

    2016-01-01

    The science education budget of many secondary schools has decreased, while shortages and environmental concerns linked to conventional Science Education Equipment and Materials (SEEMs) have emerged. Thus, in some schools, resourceful educators produce low-cost equipment from basic materials and use these so-called improvised SEEMs in practical…

  13. Metals and Ceramics Division Materials Science Program. Annual progress report for period ending December 31, 1982

    Energy Technology Data Exchange (ETDEWEB)

    McHargue, C.J. (comp.)

    1983-05-01

    This report summarizes the activities of the Materials Sciences Program in the Metals and Ceramics Division. These activities constitute about one-fourth of the research and development conducted by the division. The major elements of the Materials Sciences Program can be grouped under the areas of (1) structural characterization, (2) high-temperature alloy studies, (3) structural ceramics, and (4) radiation effects.

  14. Book Review: Materials Science aAnd Engineering: An Introduction by William D. Callister

    Directory of Open Access Journals (Sweden)

    Hassan Malik

    2012-08-01

    Full Text Available For a number of decades, Materials Science and Engineering an Introduction, has been an essential and trusted source of literature, as an introduction to Materials Science and Engineering. Now revised and updated the sixth edition is now available.

  15. Merton and Ziman's modes of science: the case of biological and similar material transfer agreements

    NARCIS (Netherlands)

    Rodriguez, Victor

    2007-01-01

    This paper makes a connection between recent studies on research materials exchange and its effect on the progress of science. Academia fears that scientific development could be hampered by the privatised practices of research material exchange. Since post-academic science represents a sufficient d

  16. Materials Science Research Rack-1 Fire Suppressant Distribution Test Report

    Science.gov (United States)

    Wieland, P. O.

    2002-01-01

    Fire suppressant distribution testing was performed on the Materials Science Research Rack-1 (MSRR-1), a furnace facility payload that will be installed in the U.S. Lab module of the International Space Station. Unlike racks that were tested previously, the MSRR-1 uses the Active Rack Isolation System (ARIS) to reduce vibration on experiments, so the effects of ARIS on fire suppressant distribution were unknown. Two tests were performed to map the distribution of CO2 fire suppressant throughout a mockup of the MSRR-1 designed to have the same component volumes and flowpath restrictions as the flight rack. For the first test, the average maximum CO2 concentration for the rack was 60 percent, achieved within 45 s of discharge initiation, meeting the requirement to reach 50 percent throughout the rack within 1 min. For the second test, one of the experiment mockups was removed to provide a worst-case configuration, and the average maximum CO2 concentration for the rack was 58 percent. Comparing the results of this testing with results from previous testing leads to several general conclusions that can be used to evaluate future racks. The MSRR-1 will meet the requirements for fire suppressant distribution. Primary factors that affect the ability to meet the CO2 distribution requirements are the free air volume in the rack and the total area and distribution of openings in the rack shell. The length of the suppressant flowpath and degree of tortuousness has little correlation with CO2 concentration. The total area of holes in the rack shell could be significantly increased. The free air volume could be significantly increased. To ensure the highest maximum CO2 concentration, the PFE nozzle should be inserted to the stop on the nozzle.

  17. Small-angle neutron scattering in materials science - an introduction

    Energy Technology Data Exchange (ETDEWEB)

    Fratzl, P. [Vienna Univ., Inst. fuer Materialphysik, Vienna (Austria)

    1996-12-31

    The basic principles of the application of small-angle neutron scattering to materials research are summarized. The text focusses on the classical methods of data evaluation for isotropic and for anisotropic materials. Some examples of applications to the study of alloys, porous materials, composites and other complex materials are given. (author) 9 figs., 38 refs.

  18. Agricultural Education (Postsecondary): Teaching Materials, Methods and Curricula. January 1990-March 1994. Quick Bibliography Series: QB 94-03.

    Science.gov (United States)

    Krug, Patricia A.

    This bibliography is intended primarily for current awareness on the topic of postsecondary agricultural education teaching materials, methods, and curricula, and as the title of the series implies, is not an indepth exhaustive bibliography on the subject. It is derived from a computerized search of the AGRICOLA database. The search strategy used…

  19. Synchrotron Studies of Narrow Band and Low-Dimensional Materials. Final Report for July 1, 1990---December 31, 2002

    Energy Technology Data Exchange (ETDEWEB)

    Allen, J. W.

    2003-05-13

    This report summarizes a 12-year program of various kinds of synchrotron spectroscopies directed at the electronic structures of narrow band and low-dimensional materials that display correlated electron behaviors such as metal-insulator transitions, mixed valence, superconductivity, Kondo moment quenching, heavy Fermions, and non-Fermi liquid properties.

  20. Exploratory Research and Development Fund, FY 1990. Report on Lawrence Berkeley Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    1992-05-01

    The Lawrence Berkeley Laboratory Exploratory R&D Fund FY 1990 report is compiled from annual reports submitted by principal investigators following the close of the fiscal year. This report describes the projects supported and summarizes their accomplishments. It constitutes a part of an Exploratory R&D Fund (ERF) planning and documentation process that includes an annual planning cycle, projection selection, implementation, and review. The research areas covered in this report are: Accelerator and fusion research; applied science; cell and molecular biology; chemical biodynamics; chemical sciences; earth sciences; engineering; information and computing sciences; materials sciences; nuclear science; physics and research medicine and radiation biophysics.

  1. Annual Research Progress Report, FY 1991

    Science.gov (United States)

    1991-09-30

    Powder. Ann Allergy 66:301-304, 1991. Larsen LV, Copeland TA, Weber RW, Vaughan TR: Allergen Extraction Methods: Effects of Time, Temperature, Buffer...Subretinal Hemorrhage: A Case Report. Ann Ophthalmol 22:259-262, 1990. Weston B, Enzenauer RW, Kraft SP, Gayowky GR: Stability of the Postoperative Alignment...Teresa Copeland , CPT, MC (11) Key Words: David L. Goodman, LTC, MC migraine food hypersensitivity mediators (12) Accumulative MEDCASE:* (13) Est Accum OMA

  2. Proceedings of the High Energy Density Materials Contractors Conference Held on 25-28 February 1990 in Long Beach, California

    Science.gov (United States)

    1990-05-01

    4 LUI 0 F- u u < cc z cc U- m< t CD z U - < 4 ) _ u w 282 Stabilization of HEDM Materials S.D. Thompson, R.A. van Opijnen, M.I. Kenney1 , S.L...Soc. (in press). 5. M. Rincon , N. Kirchner and M.T. Bowers, Int. J. Mass Spectrom. lion Proc. 86, 369 (1988). 5. The ground state of carbon ion, C

  3. THE DEVELOPMENT OF GUIDED INQUIRY SCIENCE LEARNING MATERIALS TO IMPROVE SCIENCE LITERACY SKILL OF PROSPECTIVE MI TEACHERS

    Directory of Open Access Journals (Sweden)

    M. I. S. Putra

    2016-04-01

    Full Text Available This study aimed to produce valid, practical and effective guided inquiry model science learning materials to enhance science literacy skill of prospective MI teachers. The tryout of the materials was implementedto students of MI teacher educationof Unipdu Jombang at academic year of 2015/2016 semesters 3 using One Group Pretest Posttest Design. The data collections were done using observation, testing, and questionnaires. Data were analysed using descriptive analysis of quantitative, qualitative and non-parametric statistical tests. The findings of the research were: 1 the learning materials were valid; 2 Practicality of the materials was tested through the implementation of lesson plans, while the learners’ activity wereappropriate to the guided inquirymodel; and 3 The effectiveness of the learning materials in terms of improvement of learning outcomes of students was seen from the n-gain with high category and increasing mastery of science literacy skills of learners also scored n-gain with high category and the response of students to the device and the implementation of learning is very positive. It was concluded that the materials were valid, practical, and effective to enhance science literacy skills of prospective MI teachers.

  4. The Development Materials from Substances Waste for Some Topics in Science and Technology Textbook for Primary

    Directory of Open Access Journals (Sweden)

    Abdullah Aydın

    2011-06-01

    Full Text Available The aim of study is to develop instructional materials from substances waste in which students teachers have problems to learn, taught in Instructional Technology and Materials Course at the third year of primary science teacher education program. The study was carried out with 54 primary science student teachers attending primary science teacher education program in Ahi Evran University Faculty of Education, in the fall term of the 2009-2010 academic year. Material design or development of prospective teachers' views were taken before and after. The findings from the material prepared were supported by the data obtained from the interviews conducted with 16 head student teachers. It was concluded that, based on the findings obtained from the material design the environmental pollution by waste products are designed for visual teaching materials. Can be taken into account the materials designed or developed by nominated teacher, during revised to be name of last books.

  5. Non-Structured Materials Science Data Sharing Based on Semantic Annotation

    Directory of Open Access Journals (Sweden)

    Changjun Hu

    2009-04-01

    Full Text Available The explosion of non-structured materials science data makes it urgent for materials researchers to resolve the problem of how to effectively share this information. Materials science image data is an important class of non-structured data. This paper proposes a semantic annotation method to resolve the problem of materials science image data sharing. This method is implemented by a four-layer architecture, which includes ontology building, semantic annotation, reasoning service, and application. We take metallographic image data as an example and build a metallographic image OWL-ontology. Users can accomplish semantic annotation of metallographic image according to the ontology. Reasoning service is provided in a data sharing application to demonstrate the effective sharing of materials science image data through adding semantic annotation.

  6. A rheometer for measuring the material moduli for granular solids. Final report, August 7, 1990--February 6, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Rajagopal, K.R.

    1998-03-01

    A great many industrial processes involve interaction between solids and fluids (i.e. gases or liquids). Combustion, gasification of solid fuels, shales or solid wastes, drying of particles, calcining, particle heating, regenerative heat exchangers, oxidation or reduction of ores, metal surface treatments and catalytic and thermal cracking are some of such processes. Solids and fluids serve different roles and several combinations of solids and fluids can arise in a practical situation. Thus, when considering processes or plants it is necessary to be clear as to the particular purpose served by the fluids and the solids. Heating and drying of solids, for example, involve heat and mass transfer only, whereas combustors, gasifiers etc. have the additional complication of chemical reactions which have to be carried out simultaneously with heat and mass transfer. Again, there are many processes where just the flow of granular particles take place, for example, the flow of food grain, coal or sand particles through bin, silo, hoppers, chutes, conveyor belts, inclined planes etc. In most of these cases, a theoretical modeling of the process requires a complete and thorough understanding of the phenomena involved and constitutive modeling of the constituents along with the usual balance laws. In a process, where both a fluid and a solid constituents are involved, it is essential to model both the constituents such that the models accurately describes the characteristics of the constituent concerned. While there are many different models available for fluids, the models for granular materials lack from an understanding of the material parameters.

  7. Marginalization of Socioscientific Material in Science-Technology-Society Science Curricula: Some Implications for Gender Inclusivity and Curriculum Reform

    Science.gov (United States)

    Hughes, Gwyneth

    2000-05-01

    Science education reformers have argued that presenting science in the abstract is neither motivating nor inclusive of the majority of students. Science-technology-society (STS) curricula that give science an accessible social context have developed in response, but controversy surrounds the extent to which students should be introduced to socioscientific debate. Using material from a case study of Salters' Advanced Chemistry in the United Kingdom, this article demonstrates how socioscientific material is marginalized through the structures and language of syllabus texts and through classroom practices. This means students are unlikely to engage with socioscientific aspects in their course. Socioscientific content is gendered through association with social concerns and epistemological uncertainty, and because gender is asymmetric, socioscience is devalued with respect to the masculinity of abstract science. Teachers fear that extensive coverage of socioscience devalues the curriculum, alienates traditional science students and jeopardizes their own status as gatekeepers of scientific knowledge. Thus, although STS curricula such as Salters' offer potential for making science more accessible, the article concludes that greater awareness of, and challenges to, gender binaries could result in more effective STS curriculum reform.

  8. Analytical techniques for thin films treatise on materials science and technology

    CERN Document Server

    Tu, K N

    1988-01-01

    Treatise on Materials Science and Technology, Volume 27: Analytical Techniques for Thin Films covers a set of analytical techniques developed for thin films and interfaces, all based on scattering and excitation phenomena and theories. The book discusses photon beam and X-ray techniques; electron beam techniques; and ion beam techniques. Materials scientists, materials engineers, chemical engineers, and physicists will find the book invaluable.

  9. Life Science Research Facility materials management requirements and concepts

    Science.gov (United States)

    Johnson, Catherine C.

    1986-01-01

    The Advanced Programs Office at NASA Ames Research Center has defined hypothetical experiments for a 90-day mission on Space Station to allow analysis of the materials necessary to conduct the experiments and to assess the impact on waste processing of recyclable materials and storage requirements of samples to be returned to earth for analysis as well as of nonrecyclable materials. The materials include the specimens themselves, the food, water, and gases necessary to maintain them, the expendables necessary to conduct the experiments, and the metabolic products of the specimens. This study defines the volumes, flow rates, and states of these materials. Process concepts for materials handling will include a cage cleaner, trash compactor, biological stabilizer, and various recycling devices.

  10. Applications of synchrotron radiation techniques to materials science 4

    Energy Technology Data Exchange (ETDEWEB)

    Mini, S.M. [ed.] [Northern Illinois Univ., DeKalb, IL (United States)]|[Argonne National Lab., IL (United States); Stock, S.R. [ed.] [Georgia Inst. of Tech., Atlanta, GA (United States); Perry, D.L. [ed.] [Lawrence Berkeley National Lab., CA (United States); Terminello, L.J. [ed.] [Lawrence Livermore National Lab., CA (United States)

    1998-12-31

    As more synchrotron facilities are constructed and go online both in the US and in other countries, even more applications of synchrotron radiation will be realized. Both basic and applied research possibilities are manifold, including studies of materials mentioned below and those that are yet to be discovered. Also, the combination of synchrotron-based spectroscopic techniques with ever increasing high-resolution microscopy allows researchers to study very small domains of materials in an attempt to understand their chemical and electronic properties. This is especially important in the areas of composites and other related materials involving material bonding interfaces. The topics covered in this symposium include surfaces, interfaces, electronic materials, metal oxides, solar cells, thin films, carbides, polymers, alloys, nanoparticles, and graphitic materials. Results reported at this symposium relate recent advances in X-ray absorption and scattering, imaging, tomography, microscopy, and topography methods.

  11. The application of Principal Component Analysis to materials science data

    Directory of Open Access Journals (Sweden)

    Changwon Suh

    2006-01-01

    Full Text Available The relationship between apparently disparate sets of data is a critical component of interpreting materials' behavior, especially in terms of assessing the impact of the microscopic characteristics of materials on their macroscopic or engineering behavior. In this paper we demonstrate the value of principal component analysis of property data associated with high temperature superconductivity to examine the statistical impact of the materials' intrinsic characteristics on high temperature superconducting behavior

  12. Tribology of ceramics and composites materials science perspective

    CERN Document Server

    Basu, Bikramjit

    2011-01-01

    This book helps students and practicing scientists alike understand that a comprehensive knowledge about the friction and wear properties of advanced materials is essential to further design and development of new materials. With important introductory chapters on the fundamentals, processing, and applications of tribology, the book then examines in detail the nature and properties of materials, the friction and wear of structural ceramics, bioceramics, biocomposites, and nanoceramics, as well as lightweight composites and the friction and wear of ceramics in a cryogenic environment.

  13. The material co-construction of hard science fiction and physics

    Science.gov (United States)

    Hasse, Cathrine

    2015-12-01

    This article explores the relationship between hard science fiction and physics and a gendered culture of science. Empirical studies indicate that science fiction references might spur some students' interest in physics and help develop this interest throughout school, into a university education and even further later inspire the practice of doing science. There are many kinds of fiction within the science fiction genre. In the presented empirical exploration physics students seem particularly fond of what is called `hard science fiction': a particular type of science fiction dealing with technological developments (Hartwell and Cramer in The hard SF renaissance, Orb/TOR, New York, 2002). Especially hard science fiction as a motivating fantasy may, however, also come with a gender bias. The locally materialized techno-fantasies spurring dreams of the terraforming of planets like Mars and travels in time and space may not be shared by all physics students. Especially female students express a need for other concerns in science. The entanglement of physics with hard science fiction may thus help develop some students' interest in learning school physics and help create an interest for studying physics at university level. But research indicates that especially female students are not captured by the hard techno-fantasies to the same extent as some of their male colleagues. Other visions (e.g. inspired by soft science fiction) are not materialized as a resource in the local educational culture. It calls for an argument of how teaching science is also teaching cultural values, ethics and concerns, which may be gendered. Teaching materials, like the use of hard science fiction in education, may not just be (yet another) gender bias in science education but also carrier of particular visions for scientific endeavours.

  14. FOREWORD: Some thoughts about Jürgen Hafner's work in computational materials science Some thoughts about Jürgen Hafner's work in computational materials science

    Science.gov (United States)

    Heine, Volker

    2011-10-01

    groups extended these studies to molten [19] and quasicrystalline metals. The stunning result was that among the distorted structures there was a region where quasicrystals were stable with the lowest energy among all the structures they tried and which had shown up elsewhere [20]. In addition to Jürgen Hafner's actual research work published in over 600 research papers, including numerous review articles, several contributions to books and one monograph, he has done a great deal to establish our field of electronic structure calculation as the basis for understanding materials in Austria and across Europe. The founding and expansion of the Computational Materials Science Centre (CMS) in Vienna owes much to him, as well as the development of the European Psi-k network where he served as acting chairman in 1997-1999. He has been one of the leaders of the 'Surfaces and Catalysis Working Group' of Psi-k, and the instigator of several 'Theory Meets Industry' workshops [21] to stimulate the transfer of our methodology to industrial problems. Jürgen Hafner has always aimed for the highest intellectual standards. His nose for finding the most advanced work going on elsewhere has resulted in many international cooperations, including some in the USA and Japan. His list of international joint research projects runs to many pages. This in turn has been a major contributor to European cooperation, and in making it now the leading area in the world for our field. Hafner's research has always been linked closely to understanding puzzling experimental results, and in this way he has helped to establish a good reputation for computational physics within the mainstream of condensed matter physics of materials. It has taken quite a long time to establish computer simulations as a respectable component of research in condensed matter physics. "It is not real theory" people sneered from one side, and "computer simulations are not like real experiments" from the other. In the late 1990s a

  15. Materials science tetrahedron--a useful tool for pharmaceutical research and development.

    Science.gov (United States)

    Sun, Changquan Calvin

    2009-05-01

    The concept of materials science tetrahedron (MST) concisely depicts the inter-dependent relationship among the structure, properties, performance, and processing of a drug. Similar to its role in traditional materials science, MST encompasses the development in the emerging field of pharmaceutical materials science and forms a scientific foundation to the design and development of new drug products. Examples are given to demonstrate the applicability of MST to both pharmaceutical research and product development. It is proposed that a systematic implementation of MST can expedite the transformation of pharmaceutical product development from an art to a science. By following the principle of MST, integration of research among different laboratories can be attained. The pharmaceutical science community as a whole can conduct more efficient, collaborative, and coherent research.

  16. Evaluation of dry-solids-blend material source for grouts containing 106-AN waste: September 1990 progress report

    Energy Technology Data Exchange (ETDEWEB)

    Gilliam, T.M.; Osborne, S.C.; Francis, C.L.; Scott, T.C.

    1993-09-01

    Stabilization/solidification (S/S) is the most widely used technology for the treatment and ultimate disposal of both radioactive and chemically hazardous wastes. Such technology is being utilized in a Grout Treatment Facility (GTF) by the Westinghouse Hanford Company (WHC) for the disposal of various wastes, including 106-AN wastes, located on the Hanford Reservation. The WHC personnel have developed a grout formula for 106-AN disposal that is designed to meet stringent performance requirements. This formula consists of a dry-solids blend containing 40 wt % limestone, 28 wt % granulated blast furnace slag (BFS), 28 wt % ASTM Class F fly ash, and 4 wt % Type I-II-LA Portland cement. The blend is mixed with 106-AN waste at a ratio of 9 lb of dry-solids blend per gallon of waste. This report documents progress made to date on efforts at Oak Ridge National Laboratory (ORNL) in support of WHC`s Grout Technology Program to assess the effects of the source of the dry-solids-blend materials on the resulting grout formula.

  17. Overview of the NIST Materials Science and Engineering Laboratory

    Science.gov (United States)

    2010-08-01

    mechanical routes to weakened products were identified in polybenzoxazole (Zylon) fibers . [This work included testing on materials which had failed...to characterize the processing, structure, mechanics and long-term reliability of high performance polymeric fibers used for ballistic protection...Apparatus, modified for fiber testing •Measurement techniques and instrumentation for characterizing next generation hybrid materials which

  18. Models and Materials: Bridging Art and Science in the Secondary Curriculum

    Science.gov (United States)

    Pak, D.; Cavazos, L.

    2006-12-01

    Creating and sustaining student engagement in science is one challenge facing secondary teachers. The visual arts provide an alternative means of communicating scientific concepts to students who may not respond to traditional formats or identify themselves as interested in science. We have initiated a three-year teacher professional development program at U C Santa Barbara focused on bridging art and science in secondary curricula, to engage students underrepresented in science majors, including girls, English language learners and non-traditional learners. The three-year format provides the teams of teachers with the time and resources necessary to create innovative learning experiences for students that will enhance their understanding of both art and science content. Models and Materials brings together ten secondary art and science teachers from six Santa Barbara County schools. Of the five participating science teachers, three teach Earth Science and two teach Life Science. Art and science teachers from each school are teamed and challenged with the task of creating integrated curriculum projects that bring visual art concepts to the science classroom and science concepts to the art classroom. Models and Materials were selected as unifying themes; understanding the concept of models, their development and limitations, is a prominent goal in the California State Science and Art Standards. Similarly, the relationship between composition, structure and properties of materials is important to both art and science learning. The program began with a 2-week institute designed to highlight the natural links between art and science through presentations and activities by both artists and scientists, to inspire teachers to develop new ways to present models in their classrooms, and for the teacher teams to brainstorm ideas for curriculum projects. During the current school year, teachers will begin to integrate science and art and the themes of modeling and materials

  19. U.S. Materials Science on the International Space Station: Status and Plans

    Science.gov (United States)

    Chiaramonte, Francis P.; Kelton, Kenneth F.; Matson, Douglas M.; Poirier, David R.; Trivedi, Rohit K.; Su, Ching-Hua; Volz, Martin P.; Voorhees, Peter W.

    2010-01-01

    This viewgraph presentation reviews the current status and NASA plans for materials science on the International Space Station. The contents include: 1) Investigations Launched in 2009; 2) DECLIC in an EXPRESS rack; 3) Dynamical Selection of Three-Dimensional Interface Patterns in Directional Solidification (DSIP); 4) Materials Science Research Rack (MSRR); 5) Materials Science Laboratory; 6) Comparison of Structure and Segregation in Alloys Directionally Solidified in Terrestrial and Microgravity Environments (MICAST/CETSOL); 7) Coarsening in Solid Liquid Mixtures 2 Reflight (CSLM 2R); 8) Crystal Growth Investigations; 9) Levitator Investigations; 10) Quasi Crystalline Undercooled Alloys for Space Investigation (QUASI); 11) The Role of Convection and Growth Competition in Phase Selection in Microgravity (LODESTARS); 12) Planned Additional Investigations; 13) SETA; 14) METCOMP; and 15) Materials Science NRA.

  20. Advances in materials science, Metals and Ceramics Division. Quarterly progress report, July-September 1979

    Energy Technology Data Exchange (ETDEWEB)

    Truhan, J.J.; Weld, F.N.

    1979-10-25

    Research is reported on materials for magnetic fusion energy, laser fusion energy, Al-air batteries, geothermal energy, oil shale, nuclear waste management, thermochemical cycles for hydrogen production, chemistry, and basic energy science. (FS)

  1. 75 FR 16514 - Bayer Material Science, LLC, Formally Known as Sheffield Plastics, Including On-Site Leased...

    Science.gov (United States)

    2010-04-01

    ... Employment and Training Administration Bayer Material Science, LLC, Formally Known as Sheffield Plastics... Material Science, LLC, formally known as Sheffield Plastics, including on-site leased workers from... that Bayer Material Science, LLC was formally known as Sheffield Plastics. Some workers separated...

  2. Science of Materials: A Case Study of Intentional Teaching in the Early Years

    Science.gov (United States)

    Hackling, Mark; Barratt-Pugh, Caroline

    2012-01-01

    Australia's Early Years Learning Framework and leading international researchers argue for more intentional and purposeful teaching of science in the early years. This case study of exemplary practice illustrates intentional teaching of science materials which opened-up learning opportunities in literacy and number. Student-led hands-on…

  3. Dispositions Supporting Elementary Interns in the Teaching of Reform-Based Science Materials

    Science.gov (United States)

    Eick, Charles J.; Stewart, Bethany

    2010-01-01

    Dispositions supporting the teaching of science as structured inquiry by four elementary candidates are presented. Candidates were studied during student teaching based on their positive attitudes toward teaching science with reform-based materials in their methods course. Personal learning histories informed their attitudes, values, and beliefs…

  4. Energy Frontier Research Center, Center for Materials Science of Nuclear Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Todd R. Allen

    2011-12-01

    This is a document required by Basic Energy Sciences as part of a mid-term review, in the third year of the five-year award period and is intended to provide a critical assessment of the Center for Materials Science of Nuclear Fuels (strategic vision, scientific plans and progress, and technical accomplishments).

  5. Electromagnetic Spectrum. 7th and 8th Grade Agriculture Science Curriculum. Teacher Materials.

    Science.gov (United States)

    Southern Illinois Univ., Carbondale. Dept. of Agricultural Education and Mechanization.

    This curriculum guide, the second in a set of six, contains teacher and student materials for a unit on the electromagnetic spectrum prepared as part of a seventh- and eighth-grade agricultural science curriculum that is integrated with science instruction. The guide contains the state goals and sample learning objectives for each goal for…

  6. The Efficacy of Educative Curriculum Materials to Support Geospatial Science Pedagogical Content Knowledge

    Science.gov (United States)

    Bodzin, Alec; Peffer, Tamara; Kulo, Violet

    2012-01-01

    Teaching and learning about geospatial aspects of energy resource issues requires that science teachers apply effective science pedagogical approaches to implement geospatial technologies into classroom instruction. To address this need, we designed educative curriculum materials as an integral part of a comprehensive middle school energy…

  7. 3D construction and repair from welding and material science perspectives

    Science.gov (United States)

    Marya, Surendar; Hascoet, Jean-Yves

    2016-10-01

    Additive manufacturing, based on layer-by-layer deposition of a feedstock material from a 3D data, can be mechanistically associated to welding. With feedstock fusion based processes, both additive manufacturing and welding implement similar heat sources, feedstock materials and translation mechanisms. From material science perspectives, additive manufacturing can take clue from lessons learned by millennium old welding technology to rapidly advance in its quest to generate fit for service metallic parts. This paper illustrates material science highlights extracted from the fabrication of a 316 L air vent and the functional repair of a Monel K500 (UNS N0500) with Inconel 625.

  8. Science of materials. Progress report, January 1-December 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1979-01-01

    The research program includes studies of the microchemistry, microstructure, deformation, corrosion and fracture of metals, ceramics and alloy materials, of the hydrogen embrittlement of metals, the mechanism of heat transfer across interfacts, catalytic properties of surfaces, and erosion of surfaces by fluid suspended particles. The structure of liquids, polymers and disordered solids is under investigation with emphasis on molecular interactions and bonding, on ionic conduction, phase transitions and radiation damage. Ferro- and pyro-electric materials with potential for solar energy applications are under development. The study of optical properties includes the mechanism of luminescence, the design of molecular photoreceptors, and new semiconductor materials for photovoltaic devices.

  9. RIMS International Conference : Mathematical Challenges in a New Phase of Materials Science

    CERN Document Server

    Kotani, Motoko

    2016-01-01

    This volume comprises eight papers delivered at the RIMS International Conference "Mathematical Challenges in a New Phase of Materials Science", Kyoto, August 4–8, 2014. The contributions address subjects in defect dynamics, negatively curved carbon crystal, topological analysis of di-block copolymers, persistence modules, and fracture dynamics. These papers highlight the strong interaction between mathematics and materials science and also reflect the activity of WPI-AIMR at Tohoku University, in which collaborations between mathematicians and experimentalists are actively ongoing.

  10. National Solar Radiation Database 1991-2005 Update: User's Manual

    Energy Technology Data Exchange (ETDEWEB)

    Wilcox, S.

    2007-04-01

    This manual describes how to obtain and interpret the data products from the updated 1991-2005 National Solar Radiation Database (NSRDB). This is an update of the original 1961-1990 NSRDB released in 1992.

  11. Coal conversion processes and their materials requirements. Physical sciences

    Energy Technology Data Exchange (ETDEWEB)

    Marriott, J.B.; Voorde, M. van de; Betteridge, W.

    1984-01-01

    The coal conversion processes combustion, gasification and liquefaction are discussed with respect to current industrial developments and material problems in industrial plants due to fouling, corrosion and erosion. The available materials are discussed by means of high temperature corrosion, erosion, ductibility, creep, fatigue and physical properties. Ceramics and refractories which are particularly used as thermal insulation are also discussed by means of corrosion and erosion and mechanical properties.

  12. Materials Science and Engineering: An Introduction, 7th Edition

    Science.gov (United States)

    Callister, William D., Jr.

    2006-01-01

    Now in its seventh edition, this accessible book provides readers with clear and concise discussions of key concepts while also incorporating familiar terminology. The author treats the important properties of the three primary types of materials (metals, ceramics, and polymers) and composites, as well as the relationships that exist between the structural elements of materials and their properties. Throughout, the emphasis is placed on mechanical behavior and failure, including techniques that are employed to improve performance.

  13. New Hydrophobic IOL Materials and Understanding the Science of Glistenings.

    Science.gov (United States)

    Tetz, Manfred; Jorgensen, Matthew R

    2015-01-01

    An introduction to the history of intraocular lenses (IOLs) is given, leading up to modern hydrophobic examples. The roles of hydrophobicity, hygroscopy, materials chemistry, and edge design are discussed in the context of IOLs. The four major types of IOL materials are compared in terms of their chemistry and biocompatibility. An example of a modern "hydrophobic" acrylic polymer with higher water content is discussed in detail.

  14. Multiscale Materials Science - A Mathematical Approach to the Role of Defects and Uncertainty

    Science.gov (United States)

    2016-10-28

    AFRL-AFOSR-UK-TR-2016-0034 Multiscale materials science - a mathematical approach to the role of defects and uncertainty Claude Le Bris ECOLE... science - a mathematical approach to the role of defects and uncertainty 5a.  CONTRACT NUMBER 5b.  GRANT NUMBER FA8655-13-1-3061 5c.  PROGRAM ELEMENT...1FORM SF 298 10/31/2016https://livelink.ebs.afrl.af.mil/livelink/llisapi.dll Contract FA 8655-13-1-3061 Multiscale materials science : a mathematical

  15. Academic Entrepreneurship and Exchange of Scientific Resources: Material Transfer in Life and Materials Sciences in Japanese Universities

    Science.gov (United States)

    Shibayama, Sotaro; Walsh, John P.; Baba, Yasunori

    2012-01-01

    This study uses a sample of Japanese university scientists in life and materials sciences to examine how academic entrepreneurship has affected the norms and behaviors of academic scientists regarding sharing scientific resources. Results indicate that high levels of academic entrepreneurship in a scientific field are associated with less reliance…

  16. The NASA Materials Science Research Program: It's New Strategic Goals and Opportunities

    Science.gov (United States)

    Schlagheck, Ronald A.; Stagg, Elizabeth

    2004-01-01

    In the past year, the NASA s Office of Biological and Physical Research (OBPR) has formulated a long term plan to perform strategical and fundamental research bringing together physics, chemistry, biology, and engineering to solve problems needed for current and future agency mission goals. Materials Science is one of basic disciplines within the Enterprise s Division of Physical Sciences Research. The Materials Science Program participates to utilize effective use of International Space Station (ISS) and various world class ground laboratory facilities to solve new scientific and technology questions and transfer these results for public and agency benefits. The program has recently targeted new investigative research in strategic areas necessary to expand NASA knowledge base for exploration of the universe and some of these experiments will need access to the microgravity of space. The program is implementing a wide variety of traditional ground and flight based research related types of fundamental science related to materials crystallization, fundamental processing, and properties characterization in order to obtain basic understanding of various phenomena effects and relationships to the structures, processing, and properties of materials. , In addition new initiatives in radiation protection, materials for propulsion and In-space fabrication and repair focus on research helping the agency solve problems needed for future transportation into the solar system. A summary of the types and sources for this research is presented including those experiments planned for a low gravity environment. Areas to help expand the science basis for NASA future missions are described. An overview of the program is given including the scope of the current and future NASA Research Announcements with emphasis on new materials science initiatives. A description of the planned flight experiments to be conducted on the International Space Station program along with the planned

  17. Ultrafast laser inscribed integrated photonics: material science to device development

    Directory of Open Access Journals (Sweden)

    Gross S.

    2013-11-01

    Full Text Available Detailed studies of intense light – material interactions has led to new insights into fs laser induced refractive index change in a range of glass types. This body of knowledge enables the development of advanced processing methodologies, resulting in novel planar and 3D guided wave devices. We will review the chemistry and morphology associated with fs laser induced refractive index change in multi-component glasses such as ZBLAN, phosphates and silicates, and discuss how these material changes inform our research programs developing a range of active and passive lightwave systems.

  18. Colloid and materials science for the conservation of cultural heritage: cleaning, consolidation, and deacidification.

    Science.gov (United States)

    Baglioni, Piero; Chelazzi, David; Giorgi, Rodorico; Poggi, Giovanna

    2013-04-30

    Serendipity and experiment have been a frequent approach for the development of materials and methodologies used for a long time for either cleaning or consolidation of works of art. Recently, new perspectives have been opened by the application of materials science, colloid science, and interface science frameworks to conservation, generating a breakthrough in the development of innovative tools for the conservation and preservation of cultural heritage. This Article is an overview of the most recent contributions of colloid and materials science to the art conservation field, mainly focusing on the use of amphiphile-based fluids, gels, and alkaline earth metal hydroxide nanoparticles dispersions for the cleaning of pictorial surfaces, the consolidation of artistic substrates, and the deacidification of paper, canvas, and wood. Future possible directions for solving several conservation issues that still need to be faced are also highlighted.

  19. Oxygen Transport Membranes: A Material Science and Process Engineering Approach

    NARCIS (Netherlands)

    Chen, W.

    2014-01-01

    This thesis describes several fundamental aspects on the membrane-integrated oxy-fuel combustion process and can be divided in two parts: 1) The development and characterization of membrane materials; 2) The design, simulation and evaluation of a coal-fired power plant, coupled with a membrane modul

  20. Detection of Nuclear Weapons and Materials: Science, Technologies, Observations

    Science.gov (United States)

    2010-06-04

    between Z=57 (lanthanum) and Z=72 ( hafnium ), inclusive, are very rare in commerce, making 72 a reasonable boundary between high Z and lower Z elements...materials used in nuclear weapons of other nations (e.g., for alloys ) for purposes of nuclear forensics. (2) Another task is to develop the algorithms

  1. Materials science challenges for high-temperature superconducting wire.

    Science.gov (United States)

    Foltyn, S R; Civale, L; Macmanus-Driscoll, J L; Jia, Q X; Maiorov, B; Wang, H; Maley, M

    2007-09-01

    Twenty years ago in a series of amazing discoveries it was found that a large family of ceramic cuprate materials exhibited superconductivity at temperatures above, and in some cases well above, that of liquid nitrogen. Imaginations were energized by the thought of applications for zero-resistance conductors cooled with an inexpensive and readily available cryogen. Early optimism, however, was soon tempered by the hard realities of these new materials: brittle ceramics are not easily formed into long flexible conductors; high current levels require near-perfect crystallinity; and--the downside of high transition temperature--performance drops rapidly in a magnetic field. Despite these formidable obstacles, thousands of kilometres of high-temperature superconducting wire have now been manufactured for demonstrations of transmission cables, motors and other electrical power components. The question is whether the advantages of superconducting wire, such as efficiency and compactness, can outweigh the disadvantage: cost. The remaining task for materials scientists is to return to the fundamentals and squeeze as much performance as possible from these wonderful and difficult materials.

  2. Proton Conducting Fuel Cells where Electrochemistry Meets Material Science

    DEFF Research Database (Denmark)

    Li, Qingfeng

    Fuel cells are electrochemical devices which directly convert the chemical energy of fuels into electrical energy. They are featured of high energy conversion efficiency and minimized pollutant emission. Proton conducting electrolytes are primarily used as separator materials for low and intermed...

  3. CSIR eNews: Materials science and manufacturing

    CSIR Research Space (South Africa)

    CSIR

    2009-09-01

    Full Text Available The CSIR is in a unique position to add value and impact to the materials and manufacturing industries in Africa and to develop human capital through its critical mass of multi-disciplinary researchers, its equipment and infrastructure and its...

  4. Analyzing Science Textbook Materials to Determine How "Persuasive" They Are.

    Science.gov (United States)

    Chambliss, Marilyn J.

    2001-01-01

    Demonstrates the difference between typical textbook fare and textbook material designed to be comprehensive and built upon the reader's understanding, arguing that the hallmark of persuasion and learning must include comprehensibility and understandability. A taxonomy of text types is presented, examining the argument and explanation patterns and…

  5. [Science and Technology and Recycling: Instructional Materials on Aluminum.

    Science.gov (United States)

    Aluminum Association, New York, NY.

    Educational materials on the manufacture and use of aluminum are assembled in this multi-media unit for use by junior high and secondary school students. Student booklets and brochures include: "The Story of Aluminum,""Uses of Aluminum,""Independent Study Guide for School Research Projects,""Questions and Answers About Litter, Solid Waste, and…

  6. Chemistry and Materials Science. Progress report, first half, FY 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    Thrust areas of the weapons-supporting research are growth, structure, and reactivity of surfaces and thin films; uranium research; physics and processing of metals; energetic materials; etc. The laboratory-directed R and D include director`s initiatives and individual projects, and transactinium institute studies.

  7. Demographic Data, U.S. Census 1990 Rhode Island Data; Sample Count, Calculated Percentages; s44dbm92; U.S. Census 1990 pop, housing, economic, education, ethnic origin, and employment information by town, tract, and block group level as derived from U.S. Census STF3a, Published in 1991, 1:100000 (1in=8333ft) scale, State of Rhode Island and Providence Plantations.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Demographic Data dataset, published at 1:100000 (1in=8333ft) scale, was produced all or in part from Other information as of 1991. It is described as 'U.S....

  8. Curriculum Design for Inquiry: Preservice Elementary Teachers' Mobilization and Adaptation of Science Curriculum Materials

    Science.gov (United States)

    Forbes, Cory T.; Davis, Elizabeth A.

    2010-01-01

    Curriculum materials are crucial tools with which teachers engage students in science as inquiry. In order to use curriculum materials effectively, however, teachers must develop a robust capacity for pedagogical design, or the ability to mobilize a variety of personal and curricular resources to promote student learning. The purpose of this study…

  9. Materials science approaches to solve problems with emerging mycotoxins in corn

    Science.gov (United States)

    Materials science technology is an attractive, cost effective, and robust alternative to address the limitations of highly selective natural receptors. These materials are especially well suited to address issues with emerging toxins for which a better understanding is needed to establish levels of ...

  10. Three-diemensional materials science: An intersection of three-dimensional reconstructions and simulations

    DEFF Research Database (Denmark)

    Thornton, Katsuyo; Poulsen, Henning Friis

    2008-01-01

    . Combined with three-dimensional (3D) simulations and analyses that are capable of handling the complexity of these microstructures, 3D reconstruction, or tomography, has become a powerful tool that provides clear insights into materials processing and properties. This introductory article provides...... an overview of this emerging field of materials science, as well as brief descriptions of selected methods and their applicability....

  11. Wide Band Gap Semiconductors Symposium Held in Boston, Massachusetts on 2-6 December 1991. Materials Research Society Symposium Proceedings. Volume 242

    Science.gov (United States)

    1992-01-01

    Diego. CA, April 23. 1991. 11. Yukio Saito, Kouji Sato. Hideaki Tanaka, Kazunori Fujita. Shinpei Matuda, J. Mater. Sci. 23. 842 (1988). 12. Yukio Saito...DEAC04-76DP00789. REFERENCES I. Jeffrey T. Cheung and Haluk Sankur, CRC Crit. Rev. in Solid State and Mat. Sci. 15, 6 (1988). 2. 0. Mishima in...Yokoyama, Takeshi lmura and Yukio Osaka, Jap. J. App. Phys. 2.6, L1435 (1987). 5. S. Y. Shapoval, V.T. Petrashov, 0. A. Popov, A. 0. Westner, M. D

  12. Materials Science Research Rack Onboard the International Space Station Hardware and Operations

    Science.gov (United States)

    Lehman, John R.; Frazier, Natalie C.; Johnson, Jimmie

    2012-01-01

    The Materials Science Research Rack (MSRR) is a research facility developed under a cooperative research agreement between NASA and ESA for materials science investigations on the International Space Station (ISS). MSRR was launched on STS-128 in August 2009, and is currently installed in the U.S. Destiny Laboratory Module. Since that time, MSRR has performed virtually flawlessly, logging more than 620 hours of operating time. The MSRR accommodates advanced investigations in the microgravity environment on the ISS for basic materials science research in areas such as solidification of metals and alloys. The purpose is to advance the scientific understanding of materials processing as affected by microgravity and to gain insight into the physical behavior of materials processing. MSRR allows for the study of a variety of materials including metals, ceramics, semiconductor crystals, and glasses. Materials science research benefits from the microgravity environment of space, where the researcher can better isolate chemical and thermal properties of materials from the effects of gravity. With this knowledge, reliable predictions can be made about the conditions required on Earth to achieve improved materials. MSRR is a highly automated facility with a modular design capable of supporting multiple types of investigations. Currently the NASA-provided Rack Support Subsystem provides services (power, thermal control, vacuum access, and command and data handling) to the ESA developed Materials Science Laboratory (MSL) which accommodates interchangeable Furnace Inserts (FI). Two ESA-developed FIs are presently available on the ISS: the Low Gradient Furnace (LGF) and the Solidification and Quenching Furnace (SQF). Sample-Cartridge Assemblies (SCAs), each containing one or more material samples, are installed in the FI by the crew and can be processed at temperatures up to 1400 C. Once an SCA is installed, the experiment can be run by automatic command or science conducted via

  13. JPRS Report - Science & Technology Japan: New Functional Materials.

    Science.gov (United States)

    2007-11-02

    Liquid Crystals Useful as a High-Performance Material [Akihiro Abe ] 7 Fundamental Analysis on the Effect of the Structural Modification on the...Optical Property of Conducting Polymer and Origin of Its Functionality [Katsumi Yoshino, Masanori Ozaki] lk Ab Initio Molecular Orbital Calculations of...Nishida, et al. ] 1+8 - d - Molecular Design of Polycationic Functional Elastomers [ Shinzo Yamashita, Shinzo Kohjiya] , ^9 Synthesis of

  14. Materials science research for sodium cooled fast reactors

    Indian Academy of Sciences (India)

    Baldev Raj

    2009-06-01

    The paper gives an insight into basic as well as applied research being carried out at the Indira Gandhi Centre for Atomic Research for the development of advanced materials for sodium cooled fast reactors towards extending the life of reactors to nearly 100 years and the burnup of fuel to 2,00,000 MWd/t with an objective of providing fast reactor electricity at an affordable and competitive price.

  15. Collimation and material science studies (ColMat) at GSI.

    CERN Document Server

    Stadlmann, J; Kollmus, H; Krause, M; Mustafin, E; Petzenhauser, I; Spiller, P; Strasik, I; Tahir, N; Tomut, M; Trautmann, C

    2010-01-01

    Within the frame of the EuCARD program, the GSI Helmholtzzentrum für Schwerionenforschung in Darmstadt is performing accelerator R&D in workpackage 8: ColMat. The coordinated effort is focussed on materials aspects important for building the FAIR accelerator facility at GSI and the LHC upgrade at CERN. Accelerator components and especially protection devices have to be operated in high dose environments. The radiation hazard occurs either by the primary proton and ion beams or the secondary radiation after initial beam loss. Detailed numerical simulations have been carried out to study the damage caused to solid targets by the full impact of the LHC beam as well as the SPS beam. Tungsten, copper and graphite as possible collimator materials have been studied. Experimental an theoretical studies on radiation damage on materials used for the LHC upgrade and the FAIR accelerators are performed at the present GSI experimental facilities. Technical decisions based on these results will have an impact on the F...

  16. The High Energy Materials Science Beamline (HEMS) at PETRA III

    Science.gov (United States)

    Schell, Norbert; King, Andrew; Beckmann, Felix; Ruhnau, Hans-Ulrich; Kirchhof, René; Kiehn, Rüdiger; Müller, Martin; Schreyer, Andreas

    2010-06-01

    The HEMS Beamline at the German high-brilliance synchrotron radiation storage ring PETRA III is fully tunable between 30 and 250 keV and optimized for sub-micrometer focusing. Approximately 70 % of the beamtime will be dedicated to Materials Research. Fundamental research will encompass metallurgy, physics and chemistry with first experiments planned for the investigation of the relationship between macroscopic and micro-structural properties of polycrystalline materials, grain-grain-interactions, and the development of smart materials or processes. For this purpose a 3D-microsctructure-mapper has been designed. Applied research for manufacturing process optimization will benefit from high flux in combination with ultra-fast detector systems allowing complex and highly dynamic in-situ studies of micro-structural transformations, e.g. during welding processes. The beamline infrastructure allows accommodation of large and heavy user provided equipment. Experiments targeting the industrial user community will be based on well established techniques with standardized evaluation, allowing full service measurements, e.g. for tomography and texture determination. The beamline consists of a five meter in-vacuum undulator, a general optics hutch, an in-house test facility and three independent experimental hutches working alternately, plus additional set-up and storage space for long-term experiments. HEMS is under commissioning as one of the first beamlines running at PETRA III.

  17. Structural properties of porous materials and powders used in different fields of science and technology

    CERN Document Server

    Volfkovich, Yury Mironovich; Bagotsky, Vladimir Sergeevich

    2014-01-01

    This book provides a comprehensive and concise description of most important aspects of experimental and theoretical investigations of porous materials and powders, with the use and application of these materials in different fields of science, technology, national economy and environment. It allows the reader to understand the basic regularities of heat and mass transfer and adsorption occurring in qualitatively different porous materials and products, and allows the reader to optimize the functional properties of porous and powdered products and materials. Written in an straightforward and transparent manner, this book is accessible to both experts and those without specialist knowledge, and it is further elucidated by drawings, schemes and photographs. Porous materials and powders with different pore sizes are used in many areas of industry, geology, agriculture and science. These areas include (i) a variety of devices and supplies; (ii) thermal insulation and building materials; (iii) oil-bearing geologic...

  18. Johnson County Community College Master Plan, 1990-1991.

    Science.gov (United States)

    Johnson County Community Coll., Overland Park, KS.

    Following a message from the president of the college and a review of the college's mission, this master plan for Johnson County Community College presents a series of six challenges facing the college and the policy directions and responses which the college has prepared to deal with these challenges. Each response is followed by a series of…

  19. Student Literacy Corps, 1990-1991. Final Report.

    Science.gov (United States)

    Newman, Anabel P.; And Others

    The Indiana University Student Literacy Corps was developed through an existing reading practicum course offered by the school of education through the Reading Practicum center; (2) tutors met or exceeded the time requirements of performing voluntary, uncompensated service each week of the academic term; (3) the corps provided a tutoring service…

  20. Summary of Research: Academic Departments 1990-1991

    Science.gov (United States)

    1991-10-01

    went to the theatre for escape--an entirely performances. The most decided success story, understandable motivation in men, who, on a though, was R. C...message pageants were the staples of London’s West End was an (arguably) cynical one suggests that the theatre district, not plots detailing morale in the...researcher seeks to discover why Romanticism anew the relationship of the Romantic ideological as a literary phenomenon exacts as part of its credo