WorldWideScience

Sample records for materials control resources

  1. Crime and Control: Syllabi and Instructional Materials for Criminology and Criminal Justice. Resource Materials for Teaching.

    Science.gov (United States)

    Deutschmann, Linda B., Ed.; Wright, Richard A., Ed.

    One of a series of resources for teaching sociology at the postsecondary level, this volume contains syllabi and instructional materials for courses in criminology and criminal justice. Material is divided into four sections. Section 1, innovative approaches to the teaching of criminology, contains four papers which discuss a corrections practicum…

  2. Renewable material resource potential

    NARCIS (Netherlands)

    van Weenen, H.; Wever, R.; Quist, J.; Tukker, A.; Woudstra, J.; Boons, F.A.A.; Beute, N.

    2010-01-01

    Renewable material resources, consist of complex systems and parts. Their sub-systems and sub-sub-systems, have unique, specific, general and common properties. The character of the use that is made of these resources, depends on the availability of knowledge, experience, methods, tools, machines

  3. Bodily-material resources in CSCL

    DEFF Research Database (Denmark)

    Davidsen, Jacob; Ryberg, Thomas

    2015-01-01

    Within CSCL language is often perceived as the primary vehicle for knowledge building and collaboration, whereas bodily-material resources are explored to a lesser extent. In this data session we explore the importance of gestures and body movements as bodily-material resources in relation...... and methodologically from focusing on bodily-material resources in CSCL....

  4. Polymeric materials from renewable resources

    Energy Technology Data Exchange (ETDEWEB)

    Frollini, Elisabete; Rodrigues, Bruno V. M.; Silva, Cristina G. da; Castro, Daniele O.; Ramires, Elaine C.; Oliveira, Fernando de; Santos, Rachel P. O. [Macromolecular Materials and Lignocellulosic Fibers Group, Center for Research on Science and Technology of BioResources, Institute of Chemistry of São Carlos, University of São Paulo, CP 780, 13560-970 São Carlos, São Paulo (Brazil)

    2016-05-18

    The goals of our studies have been the use of renewable raw materials in the preparation of polymeric materials with diversified properties. In this context, lignosulfonate, which is produced in large scale around the world, but not widely used in the production of polymeric materials, was used to replace phenol and polyols in the preparation of phenolic- (Ligno-PH) and polyurethane-type (Ligno-PU) polymers, respectively. These polymers were used to prepare composites reinforced with sisal lignocellulosic fibers. The use of lignosulfonate in the formulation of both types of polymers was beneficial, because in general composites with improved properties, specially impact strength, were obtained. Composites were also prepared from the so called “biopolyethylene” (HDPE), curaua lignocellulosic fiber, and castor oil (CO). All composites HDBPE/CO/Fiber exhibited higher impact strength, when compared to those of the corresponding HDBPE/Fiber. These results, combined with others (eg SEM images of the fractured surfaces) indicated that, in addition to acting as a plasticizer, this oil may have acted as a compatibilizer of the hydrophilic fiber with the hydrophobic polymer. The set of results indicated that (i) mats with nano (diameter ≤ 100nm) and/or ultrafine (submicron scale) fibers were produced, (ii) hybrid fibers were produced (bio-based mats composites), (iii) cellulosic pulp (CP) and/or lignin (Lig) can be combined with PET matrices to control properties such as stiffness and hydrophilicity of the respective mats. Materials with diversified properties were prepared from high content of renewable raw materials, thus fulfilling the proposed targets.

  5. Polymeric materials from renewable resources

    Science.gov (United States)

    Frollini, Elisabete; Rodrigues, Bruno V. M.; da Silva, Cristina G.; Castro, Daniele O.; Ramires, Elaine C.; de Oliveira, Fernando; Santos, Rachel P. O.

    2016-05-01

    The goals of our studies have been the use of renewable raw materials in the preparation of polymeric materials with diversified properties. In this context, lignosulfonate, which is produced in large scale around the world, but not widely used in the production of polymeric materials, was used to replace phenol and polyols in the preparation of phenolic- (Ligno-PH) and polyurethane-type (Ligno-PU) polymers, respectively. These polymers were used to prepare composites reinforced with sisal lignocellulosic fibers. The use of lignosulfonate in the formulation of both types of polymers was beneficial, because in general composites with improved properties, specially impact strength, were obtained. Composites were also prepared from the so called "biopolyethylene" (HDPE), curaua lignocellulosic fiber, and castor oil (CO). All composites HDBPE/CO/Fiber exhibited higher impact strength, when compared to those of the corresponding HDBPE/Fiber. These results, combined with others (eg SEM images of the fractured surfaces) indicated that, in addition to acting as a plasticizer, this oil may have acted as a compatibilizer of the hydrophilic fiber with the hydrophobic polymer. The set of results indicated that (i) mats with nano (diameter ≤ 100nm) and/or ultrafine (submicron scale) fibers were produced, (ii) hybrid fibers were produced (bio-based mats composites), (iii) cellulosic pulp (CP) and/or lignin (Lig) can be combined with PET matrices to control properties such as stiffness and hydrophilicity of the respective mats. Materials with diversified properties were prepared from high content of renewable raw materials, thus fulfilling the proposed targets.

  6. Resource Efficient Metal and Material Recycling

    Science.gov (United States)

    Reuter, Markus A.; van Schaik, Antoinette

    Metals enable sustainability through their use and their recyclability. However, various factors can affect the Resource Efficiency of Metal Processing and Recycling. Some typical factors that enable Resource Efficiency include and arranged under the drivers of sustainability: Environment (Maximize Resource Efficiency — Energy, Recyclates, Materials, Water, Sludges, Emissions, Land); Economic Feasibility (BAT & Recycling Systems Simulation / Digitalization, Product vis-à-vis Material Centric Recycling); and Social — Licence to Operate (Legislation, consumer, policy, theft, manual labour.). In order to realize this primary production has to be linked systemically with typical actors in the recycling chain such as Original Equipment Manufacturers (OEMs), Recyclers & Collection, Physical separation specialists as well as process metallurgical operations that produce high value metals, compounds and products that recycle back to products. This is best done with deep knowledge of multi-physics, technology, product & system design, process control, market, life cycle management, policy, to name a few. The combination of these will be discussed as Design for Sustainability (DfS) and Design for Recycling (DfR) applications.

  7. Asteroids prospective energy and material resources

    CERN Document Server

    2013-01-01

    The Earth has limited material and energy resources while these resources in space are virtually unlimited. Further development of humanity will require going beyond our planet and exploring of extraterrestrial resources and sources of unlimited power.   Thus far, all missions to asteroids have been motivated by scientific exploration. However, given recent advancements in various space technologies, mining asteroids for resources is becoming ever more feasible. A significant portion of asteroids value is derived from their location; the required resources do not need to be lifted at a great expense from the surface of the Earth.   Resources derived from Asteroid not only can be brought back to Earth but could also be used to sustain human exploration of space and permanent settlements in space.   This book investigates asteroids' prospective energy and material resources. It is a collection of topics related to asteroid exploration, and utilization. It presents past and future technologies and solutions t...

  8. Asteroids. Prospective energy and material resources

    Energy Technology Data Exchange (ETDEWEB)

    Badescu, Viorel (ed.) [Bucharest Polytechnic Univ. (Romania). Candida Oancea Institute

    2013-11-01

    Recent research on Prospective Energy and Material Resources on Asteroids. Carefully edited book dedicated to Asteroids prospective energy and material resources. Written by leading experts in the field. The Earth has limited material and energy resources while these resources in space are virtually unlimited. Further development of humanity will require going beyond our planet and exploring of extraterrestrial resources and sources of unlimited power. Thus far, all missions to asteroids have been motivated by scientific exploration. However, given recent advancements in various space technologies, mining asteroids for resources is becoming ever more feasible. A significant portion of asteroids value is derived from their location; the required resources do not need to be lifted at a great expense from the surface of the Earth. Resources derived from Asteroid not only can be brought back to Earth but could also be used to sustain human exploration of space and permanent settlements in space. This book investigates asteroids' prospective energy and material resources. It is a collection of topics related to asteroid exploration, and utilization. It presents past and future technologies and solutions to old problems that could become reality in our life time. The book therefore is a great source of condensed information for specialists involved in current and impending asteroid-related activities and a good starting point for space researchers, inventors, technologists and potential investors. Written for researchers, engineers, and businessmen interested in asteroids' exploration and exploitation.

  9. Moon Prospective Energy and Material Resources

    CERN Document Server

    2012-01-01

    The Earth has limited material and energy resources. Further development of the humanity will require going beyond our planet for mining and use of extraterrestrial mineral resources and search of power sources. The exploitation of the natural resources of the Moon is a first natural step on this direction. Lunar materials may contribute to the betterment of conditions of people on Earth but they also may be used to establish permanent settlements on the Moon. This will allow developing new technologies, systems and flight operation techniques to continue space exploration.   In fact, a new branch of human civilization could be established permanently on Moon in the next century. But, meantime, an inventory and proper social assessment of Moon’s prospective energy and material resources is required. This book investigates the possibilities and limitations of various systems supplying manned bases on Moon with energy and other vital resources. The book collects together recent proposals and innovative optio...

  10. Controlling percolation with limited resources

    Science.gov (United States)

    Schröder, Malte; Araújo, Nuno A. M.; Sornette, Didier; Nagler, Jan

    2017-12-01

    Connectivity, or the lack thereof, is crucial for the function of many man-made systems, from financial and economic networks over epidemic spreading in social networks to technical infrastructure. Often, connections are deliberately established or removed to induce, maintain, or destroy global connectivity. Thus, there has been a great interest in understanding how to control percolation, the transition to large-scale connectivity. Previous work, however, studied control strategies assuming unlimited resources. Here, we depart from this unrealistic assumption and consider the effect of limited resources on the effectiveness of control. We show that, even for scarce resources, percolation can be controlled with an efficient intervention strategy. We derive such an efficient strategy and study its implications, revealing a discontinuous transition as an unintended side effect of optimal control.

  11. Resources of nuclear fuels and materials

    Energy Technology Data Exchange (ETDEWEB)

    Kawamura, K [Tokyo Inst. of Tech. (Japan); Kamiyama, Teiji; Hayashi, S; Hida, Noboru; Okano, T

    1974-11-01

    In this explanatory article, data on the world resources of nuclear fuels and materials, their production, and the present state of utilization are presented by specialists in varied fields. Main materials taken up are uranium, thorium, beryllium, zirconium, niobium, rare earth elements, graphite, and materials for nuclear fusion (heavy hydrogen and tritium). World reserves and annual production of these materials listed in a number of tables are cited from statistics of the period 1970-1973 or given by estimation. These data may be used as valuable numerical data for various projects and problems of atomic power industries.

  12. Material control evaluation

    International Nuclear Information System (INIS)

    Waddoups, I.G.; Anspach, D.A.; Abbott, J.A.

    1993-01-01

    Changes in the Department of Energy's (DOE) scope of work have stimulated several laboratories and commercial companies to develop and apply technology to enhance nuclear material control. Accountability, inventory, radiation exposure, and insider protection concerns increase as many DOE facilities require increased storage. This paper summarizes a study of the existing material control technologies. The goal of the study is to identify, characterize, and quantify the trade-offs associated with using these technologies to provide real-time information on stored nuclear material that in turn supports decreasing the frequency of inventories conducted by site personnel

  13. Moon. Prospective energy and material resources

    Energy Technology Data Exchange (ETDEWEB)

    Badescu, Viorel (ed.) [Polytechnic Univ. of Bucharest (Romania). Candida Oancea Inst.

    2012-07-01

    The Earth has limited material and energy resources. Further development of the humanity will require going beyond our planet for mining and use of extraterrestrial mineral resources and search of power sources. The exploitation of the natural resources of the Moon is a first natural step on this direction. Lunar materials may contribute to the betterment of conditions of people on Earth but they also may be used to establish permanent settlements on the Moon. This will allow developing new technologies, systems and flight operation techniques to continue space exploration. In fact, a new branch of human civilization could be established permanently on Moon in the next century. But, meantime, an inventory and proper social assessment of Moon's prospective energy and material resources is required. This book investigates the possibilities and limitations of various systems supplying manned bases on Moon with energy and other vital resources. The book collects together recent proposals and innovative options and solutions. It is a useful source of condensed information for specialists involved in current and impending Moon-related activities and a good starting point for young researchers. (orig.)

  14. Natural resources and control processes

    CERN Document Server

    Wang, Mu-Hao; Hung, Yung-Tse; Shammas, Nazih

    2016-01-01

    This edited book has been designed to serve as a natural resources engineering reference book as well as a supplemental textbook. This volume is part of the Handbook of Environmental Engineering series, an incredible collection of methodologies that study the effects of pollution and waste in their three basic forms: gas, solid, and liquid. It complements two other books in the series including Environmental and Natural Resources Engineering and Integrated Natural Resources Management that serve as a basis for advanced study or specialized investigation of the theory and analysis of various natural resources systems. This book covers the management of many waste sources including those from agricultural livestock, deep-wells, industries manufacturing dyes, and municipal solid waste incinerators. The purpose of this book is to thoroughly prepare the reader for understanding the sources, treatment and control methods of toxic wastes shown to have harmful effects on the environment. Chapters provide information ...

  15. Food Processing Curriculum Material and Resource Guide.

    Science.gov (United States)

    Louisiana State Dept. of Education, Baton Rouge.

    Intended for secondary vocational agriculture teachers, this curriculum guide contains a course outline and a resource manual for a seven-unit food processing course on meats. Within the course outline, units are divided into separate lessons. Materials provided for each lesson include preparation for instruction (student objectives, review of…

  16. Raw materials resources classification and characterisation for ...

    African Journals Online (AJOL)

    Raw materials resources classification and characterisation for ceramic tableware production in Nigeria. PSA Irabor. Abstract. No Abstract. Journal of Applied Science, Engineering and Technology Vol. 2(1) 2002: 48-52. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

  17. MATERIAL CONTROL ACCOUNTING INMM

    Energy Technology Data Exchange (ETDEWEB)

    Hasty, T.

    2009-06-14

    Since 1996, the Mining and Chemical Combine (MCC - formerly known as K-26), and the United States Department of Energy (DOE) have been cooperating under the cooperative Nuclear Material Protection, Control and Accounting (MPC&A) Program between the Russian Federation and the U.S. Governments. Since MCC continues to operate a reactor for steam and electricity production for the site and city of Zheleznogorsk which results in production of the weapons grade plutonium, one of the goals of the MPC&A program is to support implementation of an expanded comprehensive nuclear material control and accounting (MC&A) program. To date MCC has completed upgrades identified in the initial gap analysis and documented in the site MC&A Plan and is implementing additional upgrades identified during an update to the gap analysis. The scope of these upgrades includes implementation of MCC organization structure relating to MC&A, establishing material balance area structure for special nuclear materials (SNM) storage and bulk processing areas, and material control functions including SNM portal monitors at target locations. Material accounting function upgrades include enhancements in the conduct of physical inventories, limit of error inventory difference procedure enhancements, implementation of basic computerized accounting system for four SNM storage areas, implementation of measurement equipment for improved accountability reporting, and both new and revised site-level MC&A procedures. This paper will discuss the implementation of MC&A upgrades at MCC based on the requirements established in the comprehensive MC&A plan developed by the Mining and Chemical Combine as part of the MPC&A Program.

  18. Nanotechnology, resources, and pollution control

    Science.gov (United States)

    Gillett, Stephen L.

    1996-09-01

    The separation of different kinds of atoms or molecules from each other is a fundamental technological problem. Current techniques of resource extraction, which use the ancient paradigm of the differential partitioning of elements into coexisting phases, are simple but extremely wasteful and require feedstocks (`ores') that are already anomalously enriched. This is impractical for pollution control and desalination, which require extraction of low concentrations; instead, atomistic separation, typically by differential motion through semipermeable membranes, is used. The present application of such membranes is seriously limited, however, mostly because of limitations in their fabrication by conventional bulk techniques. The capabilities of biological systems, such as vertebrate kidneys, are vastly better, largely because they are intrinsically structured at a molecular scale. Nanofabrication of semipermeable membranes promises capabilities on the order of those of biological systems, and this in turn could provide much financial incentive for the development of molecular assemblers, as well established markets exist already. Continued incentives would exist, moreover, as markets expanded with decreasing costs, leading to such further applications as remediation of polluted sites, cheap desalination, and resource extraction from very low-grade sources.

  19. ARAC: A unique command and control resource

    International Nuclear Information System (INIS)

    Bradley, M.M.; Baskett, R.L.; Ellis, J.S.

    1996-04-01

    The Atmospheric Release Advisory Capability (ARAC) at Lawrence Livermore National Laboratory (LLNL) is a centralized federal facility designed to provide real-time, world-wide support to military and civilian command and control centers by predicting the impacts of inadvertent or intentional releases of nuclear, biological, or chemical materials into the atmosphere. ARAC is a complete response system consisting of highly trained and experienced personnel, continually updated computer models, redundant data collection systems, and centralized and remote computer systems. With over 20 years of experience responding to domestic and international incidents, strong linkages with the Department of Defense, and the ability to conduct classified operations, ARAC is a unique command and control resource

  20. ARAC: A unique command and control resource

    Energy Technology Data Exchange (ETDEWEB)

    Bradley, M.M.; Baskett, R.L.; Ellis, J.S. [and others

    1996-04-01

    The Atmospheric Release Advisory Capability (ARAC) at Lawrence Livermore National Laboratory (LLNL) is a centralized federal facility designed to provide real-time, world-wide support to military and civilian command and control centers by predicting the impacts of inadvertent or intentional releases of nuclear, biological, or chemical materials into the atmosphere. ARAC is a complete response system consisting of highly trained and experienced personnel, continually updated computer models, redundant data collection systems, and centralized and remote computer systems. With over 20 years of experience responding to domestic and international incidents, strong linkages with the Department of Defense, and the ability to conduct classified operations, ARAC is a unique command and control resource.

  1. Global nuclear material control model

    International Nuclear Information System (INIS)

    Dreicer, J.S.; Rutherford, D.A.

    1996-01-01

    The nuclear danger can be reduced by a system for global management, protection, control, and accounting as part of a disposition program for special nuclear materials. The development of an international fissile material management and control regime requires conceptual research supported by an analytical and modeling tool that treats the nuclear fuel cycle as a complete system. Such a tool must represent the fundamental data, information, and capabilities of the fuel cycle including an assessment of the global distribution of military and civilian fissile material inventories, a representation of the proliferation pertinent physical processes, and a framework supportive of national or international perspective. They have developed a prototype global nuclear material management and control systems analysis capability, the Global Nuclear Material Control (GNMC) model. The GNMC model establishes the framework for evaluating the global production, disposition, and safeguards and security requirements for fissile nuclear material

  2. Committee on renewable resources for industrial materials (Corrim)

    Science.gov (United States)

    Robert W. Meyer; Carol B. Ovens

    1976-01-01

    In recent years major emphasis has been placed on nonrenewable resources in relation to potential national problems that may arise from possible changes in materials supply or utilization. Renewable resources, however, have received disproportionately small attention in spite of their current importance as industrial raw materials and their potential for the future. In...

  3. ABOUT INDEX EVALUATION OF MATERIAL RESOURCE SUPPLIER SELECTION

    OpenAIRE

    V. A. Skochinskaya

    2008-01-01

    The paper analyzes existing methods for evaluation of material resource supplier selection. It shows advantages and shortcomings of the present evaluation systems. The necessity for application of an index evaluation is justified in the paper. The paper contains rating (index) evaluation for material resource supplier selection which is based on the application of quantitative (index) tool instead of an expert (numerical) evaluation. 

  4. Measurement control workshop instructional materials

    Energy Technology Data Exchange (ETDEWEB)

    Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Harvel, Charles [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Clark, John [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gregg Protection Services, Lynchburg, VA (United States)

    2012-09-01

    An essential element in an effective nuclear materials control and accountability (MC&A) program is the measurement of the nuclear material as it is received, moved, processed and shipped. Quality measurement systems and methodologies determine the accuracy of the accountability values. Implementation of a measurement control program is essential to ensure that the measurement systems and methodologies perform as expected. A measurement control program also allows for a determination of the level of confidence in the accounting values.

  5. Measurement control workshop instructional materials

    Energy Technology Data Exchange (ETDEWEB)

    Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Harvel, Charles [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Clark, John [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gregg Protection Services, Lynchburg, VA (United States)

    2011-12-01

    An essential element in an effective nuclear materials control and accountability (MC&A) program is the measurement of the nuclear material as it is received, moved, processed and shipped. Quality measurement systems and methodologies determine the accuracy of the accountability values. Implementation of a measurement control program is essential to ensure that the measurement systems and methodologies perform as expected. A measurement control program also allows for a determination of the level of confidence in the ac counting values.

  6. International control of nuclear materials

    International Nuclear Information System (INIS)

    Koponen, Hannu

    1989-01-01

    Nuclear materials are subject to both national and international safeguards control. The International Atomic Energy Agency (IAEA) takes care of the international safeguards control. The control activities, which are discussed in this article, are carried out according to the agreements between various countries and the IAEA

  7. Measurement control workshop instructional materials

    Energy Technology Data Exchange (ETDEWEB)

    Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Crawford, Cary [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McGinnis, Brent [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Insolves LLC, Piketon, OH (United States)

    2014-04-01

    A workshop to teach the essential elements of an effective nuclear materials control and accountability (MC&A) programs are outlined, along with the modes of Instruction, and the roles and responsibilities of participants in the workshop.

  8. Measurement Control Workshop Instructional Materials

    International Nuclear Information System (INIS)

    Gibbs, Philip; Crawford, Cary; McGinnis, Brent

    2014-01-01

    A workshop to teach the essential elements of an effective nuclear materials control and accountability (MC&A) programs are outlined, along with the modes of Instruction, and the roles and responsibilities of participants in the workshop.

  9. Nuclear material control in Spain

    International Nuclear Information System (INIS)

    Velilla, A.

    1988-01-01

    A general view about the safeguards activities in Spain is presented. The national system of accounting for and control of nuclear materials is described. The safeguards agreements signed by Spain are presented and the facilities and nuclear materials under these agreements are listed. (E.G.) [pt

  10. Nuclear material control in Brazil

    International Nuclear Information System (INIS)

    Marzo, M.A.S.; Iskin, M.C.L.; Palhares, L.C.; Almeida, S.G. de.

    1988-01-01

    A general view about the safeguards activities in Brazil is presented. The national system of accounting for and control of nuclear materials is described. The safeguards agreements signed by Brazil are presented, the facilities and nuclear material under these agreements are listed, and the dificulties on the pratical implementation are discussed. (E.G.) [pt

  11. Material control and accountability alternatives

    International Nuclear Information System (INIS)

    1991-01-01

    Department of Energy and Nuclear Regulatory Commission regulations governing material control and accountability in nuclear facilities have become more restrictive in the past decade, especially in areas that address the insider threat. As the insider threat receives greater credibility, regulations have been strengthened to increase the probability of detecting insider activity and to prevent removal of a significant quantity of Special Nuclear Material (SNM) from areas under control of the protective force

  12. Customs control of radioactive materials

    International Nuclear Information System (INIS)

    Causse, B.

    1998-01-01

    Customs officers take part in the combat against illicit traffic od radioactive materials by means of different regulations dealing with nuclear materials, artificial radiation sources or radioactive wastes. The capability of customs officers is frequently incomplete and difficult to apply due to incompatibility of the intervention basis. In case of contaminated materials, it seems that the customs is not authorised directly and can only perform incidental control. In order to fulfil better its mission of fighting against illicit traffic of radioactive materials customs established partnership with CEA which actually includes practical and theoretical training meant to augment the capabilities of customs officers

  13. Improving the Status of Human and Material Resources in Public ...

    African Journals Online (AJOL)

    Improving the Status of Human and Material Resources in Public Primary School in Oyo States ... the Millennium Development Goals project in the State. ... libraries, well-equipped first aid centres, adequate electronically projected instructional ...

  14. A Classification Scheme for Career Education Resource Materials.

    Science.gov (United States)

    Koontz, Ronald G.

    The introductory section of the paper expresses its purpose: to devise a classification scheme for career education resource material, which will be used to develop the USOE Office of Career Education Resource Library and will be disseminated to interested State departments of education and local school districts to assist them in classifying…

  15. The status of human and material resources used in teaching ...

    African Journals Online (AJOL)

    The study explored the status of human and material resources used in teaching biology in public schools in Ilorin. A descriptive survey method was adopted. All senior school students in Ilorin constituted the population, out of which 20 secondary schools were randomly selected. A checklist tagged Inventory of Resources ...

  16. ABOUT INDEX EVALUATION OF MATERIAL RESOURCE SUPPLIER SELECTION

    Directory of Open Access Journals (Sweden)

    V. A. Skochinskaya

    2008-01-01

    Full Text Available The paper analyzes existing methods for evaluation of material resource supplier selection. It shows advantages and shortcomings of the present evaluation systems. The necessity for application of an index evaluation is justified in the paper. The paper contains rating (index evaluation for material resource supplier selection which is based on the application of quantitative (index tool instead of an expert (numerical evaluation. 

  17. Maintenance modeling and optimization integrating human and material resources

    International Nuclear Information System (INIS)

    Martorell, S.; Villamizar, M.; Carlos, S.; Sanchez, A.

    2010-01-01

    Maintenance planning is a subject of concern to many industrial sectors as plant safety and business depend on it. Traditionally, the maintenance planning is formulated in terms of a multi-objective optimization (MOP) problem where reliability, availability, maintainability and cost (RAM+C) act as decision criteria and maintenance strategies (i.e. maintenance tasks intervals) act as the only decision variables. However the appropriate development of each maintenance strategy depends not only on the maintenance intervals but also on the resources (human and material) available to implement such strategies. Thus, the effect of the necessary resources on RAM+C needs to be modeled and accounted for in formulating the MOP affecting the set of objectives and constraints. In this paper RAM+C models to explicitly address the effect of human resources and material resources (spare parts) on RAM+C criteria are proposed. This extended model allows accounting for explicitly how the above decision criteria depends on the basic model parameters representing the type of strategies, maintenance intervals, durations, human resources and material resources. Finally, an application case is performed to optimize the maintenance plan of a motor-driven pump equipment considering as decision variables maintenance and test intervals and human and material resources.

  18. Maintenance modeling and optimization integrating human and material resources

    Energy Technology Data Exchange (ETDEWEB)

    Martorell, S., E-mail: smartore@iqn.upv.e [Dpto. Ingenieria Quimica y Nuclear, Universidad Politecnica Valencia (Spain); Villamizar, M.; Carlos, S. [Dpto. Ingenieria Quimica y Nuclear, Universidad Politecnica Valencia (Spain); Sanchez, A. [Dpto. Estadistica e Investigacion Operativa Aplicadas y Calidad, Universidad Politecnica Valencia (Spain)

    2010-12-15

    Maintenance planning is a subject of concern to many industrial sectors as plant safety and business depend on it. Traditionally, the maintenance planning is formulated in terms of a multi-objective optimization (MOP) problem where reliability, availability, maintainability and cost (RAM+C) act as decision criteria and maintenance strategies (i.e. maintenance tasks intervals) act as the only decision variables. However the appropriate development of each maintenance strategy depends not only on the maintenance intervals but also on the resources (human and material) available to implement such strategies. Thus, the effect of the necessary resources on RAM+C needs to be modeled and accounted for in formulating the MOP affecting the set of objectives and constraints. In this paper RAM+C models to explicitly address the effect of human resources and material resources (spare parts) on RAM+C criteria are proposed. This extended model allows accounting for explicitly how the above decision criteria depends on the basic model parameters representing the type of strategies, maintenance intervals, durations, human resources and material resources. Finally, an application case is performed to optimize the maintenance plan of a motor-driven pump equipment considering as decision variables maintenance and test intervals and human and material resources.

  19. Global nuclear material flow/control model

    International Nuclear Information System (INIS)

    Dreicer, J.S.; Rutherford, D.S.; Fasel, P.K.; Riese, J.M.

    1997-01-01

    This is the final report of a two-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The nuclear danger can be reduced by a system for global management, protection, control, and accounting as part of an international regime for nuclear materials. The development of an international fissile material management and control regime requires conceptual research supported by an analytical and modeling tool which treats the nuclear fuel cycle as a complete system. The prototype model developed visually represents the fundamental data, information, and capabilities related to the nuclear fuel cycle in a framework supportive of national or an international perspective. This includes an assessment of the global distribution of military and civilian fissile material inventories, a representation of the proliferation pertinent physical processes, facility specific geographic identification, and the capability to estimate resource requirements for the management and control of nuclear material. The model establishes the foundation for evaluating the global production, disposition, and safeguards and security requirements for fissile nuclear material and supports the development of other pertinent algorithmic capabilities necessary to undertake further global nuclear material related studies

  20. Resource Directory of Hispanic Educational Materials on Child Abuse Prevention.

    Science.gov (United States)

    Hill, Nancy; And Others

    This annotated resource directory lists brochures, booklets, audiovisual materials, charts, and other educational materials, most of which are available in both English and Spanish, that address the following issues: (1) child abuse; (2) child development; (3) parenting skills; (4) mental health; (5) self-esteem; (6) stress management; (7) family…

  1. THE DEVELOPMENT OF BIOLOGY MATERIAL RESOURCES BY METACOGNITIVE STRATEGY

    Directory of Open Access Journals (Sweden)

    Endang Susantini

    2016-02-01

    Full Text Available The Development of Biology Material Resources by Metacognitive Strategy The study was aimed at finding out the suitability of Biology Materials using the metacognitive strategy. The materials were textbooks, self-understanding Evaluation Sheet and the key, lesson plan, and tests including the answer key. The criteria of appropriateness included the relevance of the resources with the content validity, face va­lidity and the language. This research and development study was carried out employing a 3D model, namely define, design and develop. At the define stage, three topics were selected for analysis, they were virus, Endocrine System, and Genetic material. During the design phase, the physical appearance of the materials was suited with the Metacognitive Strategy. At the develop phase, the material resources were examined and validated by two Biology experts and senior teachers of Biology. The results showed that the Biology material Resources using Metacognitive Strategy developed in the study has fell into the category of very good ( score > 3.31 and was therefore considered suitable.

  2. Inhibition: Mental Control Process or Mental Resource?

    Science.gov (United States)

    Im-Bolter, Nancie; Johnson, Janice; Ling, Daphne; Pascual-Leone, Juan

    2015-01-01

    The current study tested 2 models of inhibition in 45 children with language impairment and 45 children with normally developing language; children were aged 7 to 12 years. Of interest was whether a model of inhibition as a mental-control process (i.e., executive function) or as a mental resource would more accurately reflect the relations among…

  3. Insertion material for controlling reactivity

    International Nuclear Information System (INIS)

    Baba, Iwao.

    1994-01-01

    Moderators and a group of suspended materials having substantially the same density as the moderator are sealed in a hollow rod vertically inserted to a fuel assembly. Specifically, the group of suspended materials is adapted to have a density changing stepwise from density of the moderator at the exit temperature of the reactor core to that at the inlet temperature of the reactor core. Reactivity is selectively controlled for a portion of high power and a portion of high reactivity by utilizing the density of the moderator and the distribution of the density. That is, if the power distribution is flat, the density of the moderators changes at a constant rate over the vertical direction of the reactor core and the suspended materials stay at a portion of the same density, to form a uniform distribution. Further, upon reactor shutdown, since the liquid temperature of the moderators is lowered and the density is increased, all of beads are collected at the upper portion to remove water at the upper portion of the reactor core of low burnup degree thereby selectively controlling the reactivity at a portion of high power and a portion of high reactivity. (N.H.)

  4. Resource allocation for epidemic control in metapopulations.

    Science.gov (United States)

    Ndeffo Mbah, Martial L; Gilligan, Christopher A

    2011-01-01

    Deployment of limited resources is an issue of major importance for decision-making in crisis events. This is especially true for large-scale outbreaks of infectious diseases. Little is known when it comes to identifying the most efficient way of deploying scarce resources for control when disease outbreaks occur in different but interconnected regions. The policy maker is frequently faced with the challenge of optimizing efficiency (e.g. minimizing the burden of infection) while accounting for social equity (e.g. equal opportunity for infected individuals to access treatment). For a large range of diseases described by a simple SIRS model, we consider strategies that should be used to minimize the discounted number of infected individuals during the course of an epidemic. We show that when faced with the dilemma of choosing between socially equitable and purely efficient strategies, the choice of the control strategy should be informed by key measurable epidemiological factors such as the basic reproductive number and the efficiency of the treatment measure. Our model provides new insights for policy makers in the optimal deployment of limited resources for control in the event of epidemic outbreaks at the landscape scale.

  5. Resource allocation for epidemic control in metapopulations.

    Directory of Open Access Journals (Sweden)

    Martial L Ndeffo Mbah

    Full Text Available Deployment of limited resources is an issue of major importance for decision-making in crisis events. This is especially true for large-scale outbreaks of infectious diseases. Little is known when it comes to identifying the most efficient way of deploying scarce resources for control when disease outbreaks occur in different but interconnected regions. The policy maker is frequently faced with the challenge of optimizing efficiency (e.g. minimizing the burden of infection while accounting for social equity (e.g. equal opportunity for infected individuals to access treatment. For a large range of diseases described by a simple SIRS model, we consider strategies that should be used to minimize the discounted number of infected individuals during the course of an epidemic. We show that when faced with the dilemma of choosing between socially equitable and purely efficient strategies, the choice of the control strategy should be informed by key measurable epidemiological factors such as the basic reproductive number and the efficiency of the treatment measure. Our model provides new insights for policy makers in the optimal deployment of limited resources for control in the event of epidemic outbreaks at the landscape scale.

  6. Material resources availability, parent subject perception and school ...

    African Journals Online (AJOL)

    Students' poor performance in the Yoruba language is being considered a serious problem by researchers and education stakeholders. Despite their efforts, no appreciable improvement is noticeable for hardly are enough researches on the extent to which school material resources availability, parental subject perception ...

  7. The American Slave Narrative. Dramatic Resource Material for the Classroom

    Science.gov (United States)

    Polsky, Milton

    1976-01-01

    Notes that the story of the black runaway who escapes the slave status under great risk to live as a free man or woman comprises one of the most meaningful chapters in United States history. The slave narrative genre offers resource material which all children should find compelling and inspiring. (Author/AM)

  8. Technology assessment of solar-energy systems. Materials resource and hazardous materials impacts of solar deployment

    Science.gov (United States)

    Schiffman, Y. M.; Tahami, J. E.

    1982-04-01

    The materials-resource and hazardous-materials impacts were determined by examining the type and quantity of materials used in the manufacture, construction, installation, operation and maintenance of solar systems. The materials requirements were compared with US materials supply and demand data to determine if potential problems exist in terms of future availability of domestic supply and increased dependence on foreign sources of supply. Hazardous materials were evaluated in terms of public and occupational health hazards and explosive and fire hazards. It is concluded that: although large amounts of materials would be required, the US had sufficient industrial capacity to produce those materials; (2) postulated growth in solar technology deployment during the period 1995-2000 could cause some production shortfalls in the steel and copper industry; the U.S. could increase its import reliance for certain materials such as silver, iron ore, and copper; however, shifts to other materials such as aluminum and polyvinylchloride could alleviate some of these problems.

  9. Material control and accountability orders

    International Nuclear Information System (INIS)

    Jewell, D.L.

    1988-01-01

    The Department of Energy's (DOE) Material Control and Accountability (MC and A) Orders were revised during this past year. The primary focus of the revision process was to eliminate any policy gaps that existed between current orders and the standards and criteria and to examine current policy where questions of completeness or effectiveness may be of concern. The MC and A Subtask Group identified the following three major areas for change: (1) the need to expand the graded safeguards concept; (2) the need to provide for defense in depth; and (3) the need to include system performance requirements. Operational and cost impacts were of primary consideration in these changes. The subtask group accomplished its goal as directed and within the required time frames. The revision process benefitted tremendously from the earlier works of the numerous standards and criteria committees and the Operation Cerberus Committees

  10. The first word in material control is material

    International Nuclear Information System (INIS)

    Martin, H.R.; Wilkey, D.D.

    1989-01-01

    Material control has tended to rely on containment and access control, augmented by physical inventories, to meet the material control and accounting (MC ampersand A) goals of detecting theft/diversion and providing assurance that all nuclear material (NM) is present. Such systems have significant deficiencies. Material containment strategies are generally based on protection provided at boundaries around the NM and rely on alarms at the boundary for detection of theft/diversion. Assurance that all NM is present requires a negative inference based on the absence of alarms. Additionally, design of effective boundary protection systems requires that the designer be able to anticipate and provide protection for all scenarios that the insider adversary might utilize in removing material from the facility. Access control is an administrative system that cannot protect against malevolent actions by insiders authorized to access the material. Inventories may not provide timely detection of theft/diversion, and the sensitivity of detection depends on the magnitude of the variance of the inventory difference. More effective material control is provided for both material in storage and in process by a material-oriented system designed to detect abnormal events involving NM. Abnormal events are defined as any unauthorized activity involving NM, whether accidental or deliberate, and are assessed to determine the cause of the discrepancy. The designs of material-oriented control systems vary greatly, depending on the operations involved; however, a model system would include the use of process monitoring data for material control and automated surveillance of material in storage

  11. Efficacy of materials used by resource limited farmers in ethno ...

    African Journals Online (AJOL)

    zino

    2013-04-03

    Apr 3, 2013 ... and efficacy of selected materials used in the control fleas in free-range chickens. The materials tested .... Mature fleas, Ctenocephalides felis of mixed sex were obtained from Clinvet ... were bought from one farmer in the Amatola basin. In addition, ..... Ababa University of School of graduate studies.

  12. Report of the Material Control and Material Accounting Task Force

    International Nuclear Information System (INIS)

    1978-03-01

    In September 1977 a Task Force was formed to complete a study of the role of material control and material accounting in NRC's safeguards program. The Task Force's assignment was to: define the roles and objectives of material control and material accounting in the NRC safeguards program; recommend goals for the material control and material accounting systems based on their roles and objectives; assess the extent to which the existing safeguards regulatory base meets or provides the capability to meet the recommended goals; and provide direction for material control and material accounting development, including both near-term and long-term upgrades. The study was limited to domestic nuclear facilities possessing significant amounts of plutonium, uranium-233 or highly enriched uranium in unsealed form. The Task Force findings are reported

  13. Engineering solutions for sustainability materials and resources II

    CERN Document Server

    Mishra, Brajendra; Anderson, Dayan; Sarver, Emily; Neelameggham, Neale

    2016-01-01

    With impending and burgeoning societal issues affecting both developed and emerging nations, the global engineering community has a responsibility and an opportunity to truly make a difference and contribute. The papers in this collection address what materials and resources are integral to meeting basic societal sustainability needs in critical areas of energy, transportation, housing, and recycling. Contributions focus on the engineering answers for cost-effective, sustainable pathways; the strategies for effective use of engineering solutions; and the role of the global engineering community. Authors share perspectives on the major engineering challenges that face our world today; identify, discuss, and prioritize engineering solution needs; and establish how these fit into developing global-demand pressures for materials and human resources.

  14. Petroleum as a raw material resource for sustainable development

    International Nuclear Information System (INIS)

    Egorov, O.I.

    1996-01-01

    Author notes that for economic and social region development it is necessary has been created large petroleum chemical plants near by Atyrau city (initial raw material - Tengiz, Korolev and other petroleum deposits of this region) and Aktau (Mangistau and Bazuchin petroleum). Realization of projects for structure changes of petroleum and gas region demands a great investments. It is noted that growing scales of petroleum and gas resources mastering calls already a considerable environmental complications because of Caspian Sea's level marking rise

  15. Material control system simulator program reference manual

    Energy Technology Data Exchange (ETDEWEB)

    Hollstien, R.B.

    1978-01-24

    A description is presented of a Material Control System Simulator (MCSS) program for determination of material accounting uncertainty and system response to particular adversary action sequences that constitute plausible material diversion attempts. The program is intended for use in situations where randomness, uncertainty, or interaction of adversary actions and material control system components make it difficult to assess safeguards effectiveness against particular material diversion attempts. Although MCSS may be used independently in the design or analysis of material handling and processing systems, it has been tailored toward the determination of material accountability and the response of material control systems to adversary action sequences.

  16. Material control system simulator program reference manual

    International Nuclear Information System (INIS)

    Hollstien, R.B.

    1978-01-01

    A description is presented of a Material Control System Simulator (MCSS) program for determination of material accounting uncertainty and system response to particular adversary action sequences that constitute plausible material diversion attempts. The program is intended for use in situations where randomness, uncertainty, or interaction of adversary actions and material control system components make it difficult to assess safeguards effectiveness against particular material diversion attempts. Although MCSS may be used independently in the design or analysis of material handling and processing systems, it has been tailored toward the determination of material accountability and the response of material control systems to adversary action sequences

  17. Materials Synthesis Of Barium Hexa ferrite Used Local Natural Resources

    International Nuclear Information System (INIS)

    Ridwan; Sulungbudi, Grace Tj.; Mujamilah

    2003-01-01

    The magnetic materials of barium hexa ferrites, Ba O.6Fe 2 O 3 successfully synthesized by powder metallurgy method used local natural resources from materials waste of steel fabrication (HSM, CRM), waste of polymer fabrication (LK) as well as iron sands (PBA). These waste as well as iron sands were the main resources of iron oxide, Fe 2 O 3 . The barium oxide used in this experiments are from BaCO 3 product of Merck, and BaCO 4 which is commercially available in the market as barite. Phase identification by x-ray diffraction technique show the synthesized magnetic materials are agreed with the available commercial product, (SUMI). The energy product maximum (BH) max measured by vibrating sample magnetometer (VSM) for the samples used HSM-, CRM- and BaCO 3 as basic materials are 1.141 MGOe and 1.136 MGOe while SUMI is 1.142 MGOe. However for the samples made from LK-, PBA- used of BaCO 3 or CRM- with barite, the energy product maximum (BH) max are relatively lower than commercial product

  18. Nuclear material control in the United States

    International Nuclear Information System (INIS)

    Jaeger, C.; Waddoups, I.

    1995-01-01

    The Department of Energy has defined a safeguards system to be an integrated system of physical protection, material accounting and material control subsystems designed to deter, prevent, detect, and respond to unauthorized possession, use, or sabotage of SNM. In practice, safeguards involve the development and application of techniques and procedures dealing with the establishment and continued maintenance of a system of activities. The system must also include administrative controls and surveillance to assure that the procedures and techniques of the system are effective and are being carried out. The control of nuclear material is critical to the safeguarding of nuclear materials within the United States. The U.S. Department of Energy includes as part of material control four functional performance areas. They include access controls, material surveillance, material containment and detection/assessment. This paper will address not only these areas but also the relationship between material control and other safeguards and security functions

  19. Material control system simulator user's manual

    International Nuclear Information System (INIS)

    Hollstien, R.B.

    1978-01-01

    This report describes the use of a Material Control System Simulator (MCSS) program for determination of material accounting uncertainty and system response to particular adversary action sequences that constitute plausible material diversion attempts. The program is intended for use in situations where randomness, uncertainty, or interaction of adversary actions and material control system components make it difficult to assess safeguards effectiveness against particular material diversion attempts

  20. Design And Implementation Of Radio Resources Controller Of WCDMA

    International Nuclear Information System (INIS)

    Hafez, A.M.A.

    2012-01-01

    Recently, wireless communications and especially the mobile networks are employed in nuclear applications including, but not limited to, Nuclear Material Integrity [1], Radiation Monitoring Networks [2, 3] and Nuclear Power Plants [4]. The thesis introduces an overview about one of the third generation (3G) mobile networks, known as Universal Mobile Telecommunications System (UMTS) networks, which consists of Universal Terrestrial Radio Access Network (UTRAN) and the Core Network (CN). The UTRAN has many interfaces, but the thesis focuses on the Uu interface which is between the User Equipment (UE) and the UTRAN. That interface is based on Wideband Code Division Multiple Accessing (WCDMA) system. The protocol architecture of UMTS is composed of two planes; the control plane and the user plane. Again, the thesis is concerned on the control plane which has the Radio Resources Control (RRC) protocol to manage the control signal at the Uu interface between the UE and the Radio Network Controller. The main goal of the thesis is to design, implement and test the building blocks of Radio Resources Controller of the WCDMA system. Also, the thesis presents one of nuclear applications that is based on WCDMA. This application includes design, implementation and simulation of Radiation Monitoring network as a pilot prototype model.

  1. Inner solar system prospective energy and material resources

    CERN Document Server

    Zacny, Kris

    2015-01-01

    This book investigates Venus and Mercury prospective energy and material resources. It is a collection of topics related to exploration and utilization of these bodies. It presents past and future technologies and solutions to old problems that could become reality in our life time. The book therefore is a great source of condensed information for specialists interested in current and impending Venus and Mercury related activities and a good starting point for space researchers, inventors, technologists and potential investors.   Written for researchers, engineers, and businessmen interested in Venus and Mercury exploration and exploitation.

  2. Marine dredged sediments as new materials resource for road construction.

    Science.gov (United States)

    Siham, Kamali; Fabrice, Bernard; Edine, Abriak Nor; Patrick, Degrugilliers

    2008-01-01

    Large volumes of sediments are dredged each year in Europe in order to maintain harbour activities. With the new European Union directives, harbour managers are encouraged to find environmentally sound solutions for these materials. This paper investigates the potential uses of Dunkirk marine dredged sediment as a new material resource for road building. The mineralogical composition of sediments is evaluated using X-ray diffraction and microscopy analysis. Since sediments contain a high amount of water, a dewatering treatment has been used. Different suitable mixtures, checking specific geotechnical criteria as required in French standards, are identified. The mixtures are then optimized for an economical reuse. The mechanical tests conducted on these mixtures are compaction, bearing capacity, compression and tensile tests. The experimental results show the feasibility of the beneficial use of Dunkirk marine dredged sand and sediments as a new material for the construction of foundation and base layers for roads. Further research is now needed to prove the resistance of this new material to various environmental impacts (e.g., frost damage).

  3. Rice Hulls as a Renewable Complex Material Resource

    Directory of Open Access Journals (Sweden)

    Irina Glushankova

    2018-05-01

    Full Text Available As a result of rice grain processing, a big amount of waste (up to 20% is produced. It is mainly rice hulls. The main components of rice hulls are cellulose, lignin and mineral ash. The mineral ash quantity in rice hulls varies from 15 up to 20%, by weight of the rice hulls. The mineral ash consists of amorphous silica (opal-type. Due to the high content of silica in rice hulls, the material burns with difficulty under natural conditions, and it is biodegradably destroyed only with difficulty, when composted. Utilization of rice hulls then becomes an ecological problem due to huge rice production and its continuous growth. At the same time, the annual quantity of silica content in rice hulls is comparable with the quantity of amorphous silica produced as a mineral resource. The issue of manufacturing cellular glass silica construction materials from rice hulls as a renewable resource is discussed in this paper. The utilization technology is based on an amorphous silicon oxide with the use of energy from the combustion of the organic component of rice hulls.

  4. Prospects for development of hydrocarbon raw materials resources reproduction

    Science.gov (United States)

    Vertakova, Y. V.; Babich, T. N.; Polozhentseva, Y. S.; Zvyagintsev, G. L.

    2017-10-01

    The article presents data on the influence of factors in the field of innovative technology of thermocatalytic depolymerization of solid household wastes (SHW) on the efficiency and prospects for the development of technogenic hydrocarbon raw materials resource reproduction. Process thermodynamics, reactions kinetics, the mechanism of thermolysis of secondary polymers in organic solvents have been studied by means of laboratory experiments. It is shown that different morphological groups of wastes dissolve practically at the same rate at temperatures of 250-310°C. A homogeneous product is formed in the liquid phase; the spread of values for the elements lies in the interval of 1.5-4.5 %; technological requirements of the stages of formation of boiler fuels are satisfied. Using the principles of patent analysis, new techniques of processing household waste components are proposed. The basics of energy-efficient and energy-saving processes of technogenic hydrocarbon raw materials resource reproduction have been laid. The possibility of increasing the production payback and intensification is shown. Ecological and demographic safety for population and technical and economic benefits from SHW processing are achieved.

  5. the legal chasm between resource control and the determination of ...

    African Journals Online (AJOL)

    Mofasony

    In a true Federalism, the component states constitutionally control the resources, which are found within their geographical spread, and they pay a certain percentage of revenue derived from such resources to the Federal Government. Practically, therefore, resource control rests in the component states of the Federation.

  6. Oil minorities and the politics of resource control in Nigeria ...

    African Journals Online (AJOL)

    The paper examines the contentious nature of resource control and distribution in Nigeria. It avers that resource control has been a big problem confronting the Nigerian state from inception. This fact has not been helped by the heterogeneous nature of Nigeria, the weak capacity of the Nigerian state, the politics of resource ...

  7. Assessment of material and technical resources of crop production technologies

    Directory of Open Access Journals (Sweden)

    V. M. Beylis

    2017-01-01

    Full Text Available The author explains the general principles of influence of the material and technical resources (MTR on performance and efficiency of the main technological operations in crop production. Various technologies from the point of view of MTR expenses were estimated. The general tendencies in development of crop production technologies were revealed. The distribution of costs of materials and equipment to perform a variety of agricultural activities was determined. Cost indicators should be a guide in the search of innovative technological processes and working elements of agricultural machins. The greatest values of expenses of work, fuel, metal, and also, money where found. The concepts allowing to provide costs production reduction were formulated. To achieve the maximum productivity with the minimum expenses, the perspective calculations shoul be based on «progressive» agrotechnologies. When determining progressive agrotechnology it is necessary on reasonable grounds to approach indicators of crop productivity in various agrozones and regions of the country. For an assessment of efficiency of MTR by crop production and ensuring decrease in resource intensity of agricultural products by search and use of essentially new technologies for energy saving when performing agricultural operations, an integrated percentage indicator of comparison of progressive technologies with the applied ones was developed. MTR at application of new progressive crop production technologies by integrated percentage index were estimated. This indicator can be used for definition of efficiency of MTR. Application of the offered technique will promote an effective assessment of MTR, decrease in resource intensity by search and developments of essentially new technologies of performance of operations in crop production.

  8. Control of nuclear materials and materials in Argentina

    International Nuclear Information System (INIS)

    Arbor G, A.; Fernandes M, S.

    1988-01-01

    A general view about the safeguards activities in Argentina is presented. The national system of accounting for and control of nuclear materials is described. The safeguards agreement signed by Argentina are presented. (E.G.) [pt

  9. Cost effective material control and accountability training

    International Nuclear Information System (INIS)

    Robichaux, J.J.; Shull, L.M.; Salizzoni, L.M.

    1995-01-01

    DOE Order 5630.15, ''Safeguards and Security Training Program'' is being implemented at the Savannah River Site within the Westinghouse Savannah River Company's material control and accountability program. This paper reviews the development of a material control and accountability task analysis, the development of specific material control and accountability courses, and the cost effective and innovative strategies employed to implement the training program. The paper also discusses how the site material control and accountability policies and procedures are incorporated into the Westinghouse Savannah River Company training program to ensure that personnel receive the most current information

  10. Methods of evaluation of procurement of material resources

    Directory of Open Access Journals (Sweden)

    Dupina L.F.

    2017-04-01

    Full Text Available the researchers of this article analyze some questions concerning the choice of methods of material resources evaluation, types and elements of the evaluation, organization of effective accounting and analytical support of material and production resources of enterprises.

  11. Measurement control program for nuclear material accounting

    International Nuclear Information System (INIS)

    Brouns, R.J.; Roberts, F.P.; Merrill, J.A.; Brown, W.B.

    1980-06-01

    A measurement control program for nuclear material accounting monitors and controls the quality of the measurments of special nuclear material that are involved in material balances. The quality is monitored by collecting data from which the current precision and accuracy of measurements can be evaluated. The quality is controlled by evaluations, reviews, and other administrative measures for control of selection or design of facilities, equipment and measurement methods and the training and qualification of personnel who perform SNM measurements. This report describes the most important elements of a program by which management can monitor and control measurement quality

  12. Fuzzy batch controller for granular materials

    OpenAIRE

    Zamyatin Nikolaj; Smirnov Gennadij; Fedorchuk Yuri; Rusina Olga

    2018-01-01

    The paper focuses on batch control of granular materials in production of building materials from fluorine anhydrite. Batching equipment is intended for smooth operation and timely feeding of supply hoppers at a required level. Level sensors and a controller of an asynchronous screw drive motor are used to control filling of the hopper with industrial anhydrite binders. The controller generates a required frequency and ensures required productivity of a feed conveyor. Mamdani-type fuzzy infer...

  13. Protection and control of nuclear materials

    International Nuclear Information System (INIS)

    Jalouneix, J.; Winter, D.

    2007-01-01

    In the framework of the French regulation on nuclear materials possession, the first liability is the one of operators who have to know at any time the quantity, quality and localization of any nuclear material in their possession. This requires an organization of the follow up and of the inventory of these materials together with an efficient protection against theft or sabotage. The French organization foresees a control of the implementation of this regulation at nuclear facilities and during the transport of nuclear materials by the minister of industry with the sustain of the institute of radiation protection and nuclear safety (IRSN). This article presents this organization: 1 - protection against malevolence; 2 - national protection and control of nuclear materials: goals, administrative organization, legal and regulatory content (authorization, control, sanctions), nuclear materials protection inside facilities (physical protection, follow up and inventory, security studies), protection of nuclear material transports (physical protection, follow up), control of nuclear materials (inspection at facilities, control of nuclear material measurements, inspection of nuclear materials during transport); 3 - international commitments of France: non-proliferation treaty, EURATOM regulation, international convention on the physical protection of nuclear materials, enforcement in France. (J.S.)

  14. Fuzzy batch controller for granular materials

    Directory of Open Access Journals (Sweden)

    Zamyatin Nikolaj

    2018-01-01

    Full Text Available The paper focuses on batch control of granular materials in production of building materials from fluorine anhydrite. Batching equipment is intended for smooth operation and timely feeding of supply hoppers at a required level. Level sensors and a controller of an asynchronous screw drive motor are used to control filling of the hopper with industrial anhydrite binders. The controller generates a required frequency and ensures required productivity of a feed conveyor. Mamdani-type fuzzy inference is proposed for controlling the speed of the screw that feeds mixture components. As related to production of building materials based on fluoride anhydrite, this method is used for the first time. A fuzzy controller is proven to be effective in controlling the filling level of the supply hopper. In addition, the authors determined optimal parameters of the batching process to ensure smooth operation and production of fluorine anhydrite materials of specified properties that can compete with gypsum-based products.

  15. Controlling material reactivity using architecture

    Science.gov (United States)

    Sullivan, Kyle

    2017-06-01

    The reactivity of thermites can be tailored through selection of several parameters, and can range from very slow burns to rapid deflagrations. 3D printing is a rapidly emerging field, and offers the potential to build architected parts. Here we sought to explore whether controlling such features could be a suitable path forward for gaining additional control of the reactivity. This talk discusses several new methods for preparing thermite samples with controlled architectures using 3D printing. Additionally, we demonstrate that the architecture can play a role in the reactivity of an object. Our results suggest that architecture can be used to tailor the convective and/or advective energy transport during a deflagration, thus enhancing or retarding the reaction. The results are promising in that they give researchers an additional way of controlling the energy release rate without defaulting to the conventional approach of changing the formulation. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under contract DE-AC52-07NA27344. LLNL-ABS-708525. In collaboration with: Cheng Zhu, Eric Duoss, Matt Durban, Alex Gash, Alexandra Golobic, Michael Grapes, David Kolesky, Joshua Kuntz, Jennifer Lewis, Christopher Spadaccini; LAWRENCE LIVERMORE NATIONAL LAB.

  16. Optimal dynamic control of resources in a distributed system

    Science.gov (United States)

    Shin, Kang G.; Krishna, C. M.; Lee, Yann-Hang

    1989-01-01

    The authors quantitatively formulate the problem of controlling resources in a distributed system so as to optimize a reward function and derive optimal control strategies using Markov decision theory. The control variables treated are quite general; they could be control decisions related to system configuration, repair, diagnostics, files, or data. Two algorithms for resource control in distributed systems are derived for time-invariant and periodic environments, respectively. A detailed example to demonstrate the power and usefulness of the approach is provided.

  17. Materials in world perspective. Assessment of resources, technologies and trends for key materials industries

    Energy Technology Data Exchange (ETDEWEB)

    Altenpohl, D G

    1980-01-01

    This book deals with the entire materials cycle - from extraction or harvesting to processing, manufacture, use, and reuse or disposal. It covers the present status and ongoing developments in six key materials industries in both industrialized and developing countries. Techno-economics trends, which are recognizable today, as well as important changes taking place from the mine through the refining stage on to finished products, are outlined. The 'problem triangle' of the materials industry - basic or raw materials, ecology and energy - is discussed. Of specific importance are the impacts which a given material or technology can have on the environment. Methods of assessing these impacts, which should be integrated into overall technology planning by the materials industry, are described. This book discusses resources, industry's social responsibilities and limits-to-growth. An explanation is given for opposing views on constraints and growth, not only for the materials industry, but also for the automotive and packaging industries. Thus, this book spotlights the interaction between different fields of technology and their interrelationship with and between different regions on Earth.

  18. US national material control and accounting system

    International Nuclear Information System (INIS)

    Smith, C.N.

    1984-01-01

    The State System of Accounting and Control (SSAC) for fuel cycle facilities in the licensed, commercial sector of the US nuclear community, and details of the material control and accounting measures dealing with the national safeguards program are discussed. The concept and role of the Fundamental Nuclear Material Control (FNMC) Plan is discussed. Also, the relationship between the national safeguards program and the international safeguards program of the US SSAC are described

  19. Development and use of reference materials and quality control materials

    International Nuclear Information System (INIS)

    2003-04-01

    Current knowledge is summarized on correct use of commercially available certified reference materials (CRMs) and reference materials (RMs). Acknowledged are also the limitations and restrictions analysts have to face if they want to apply quality control. The concept of in-house RMs or quality control materials (QCMs) is advocated to supplement the use of CRMs for quality control purposes. On hand advice on how to select, prepare, characterize and use these QCMs is given from the experts' perspective. Several scenarios are described to make this concept widely applicable to: advanced laboratories with CRMs with validated analytical techniques available, laboratories with less experience and facilities, as well as cases were labile compounds and unstable matrices are involved. Each scenario considers different approaches to overcome the lack of appropriate CRMs and advise on the preparation of QCMs, which might fit the particular purpose

  20. Development and use of reference materials and quality control materials

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-04-01

    Current knowledge is summarized on correct use of commercially available certified reference materials (CRMs) and reference materials (RMs). Acknowledged are also the limitations and restrictions analysts have to face if they want to apply quality control. The concept of in-house RMs or quality control materials (QCMs) is advocated to supplement the use of CRMs for quality control purposes. On hand advice on how to select, prepare, characterize and use these QCMs is given from the experts' perspective. Several scenarios are described to make this concept widely applicable to: advanced laboratories with CRMs with validated analytical techniques available, laboratories with less experience and facilities, as well as cases were labile compounds and unstable matrices are involved. Each scenario considers different approaches to overcome the lack of appropriate CRMs and advise on the preparation of QCMs, which might fit the particular purpose.

  1. The Trope Tank: A Laboratory with Material Resources for Creative Computing

    Directory of Open Access Journals (Sweden)

    Nick Montfort

    2014-12-01

    Full Text Available http://dx.doi.org/10.5007/1807-9288.2014v10n2p53 Principles for organizing and making use of a laboratory with material computing resources are articulated. This laboratory, the Trope Tank, is a facility for teaching, research, and creative collaboration and offers hardware (in working condition and set up for use from the 1970s, 1980s, and 1990s, including videogame systems, home computers, and an arcade cabinet. To aid in investigating the material history of texts, the lab has a small 19th century letterpress, a typewriter, a print terminal, and dot-matrix printers. Other resources include controllers, peripherals, manuals, books, and software on physical media. These resources are used for teaching, loaned for local exhibitions and presentations, and accessed by researchers and artists. The space is primarily a laboratory (rather than a library, studio, or museum, so materials are organized by platform and intended use. Textual information about the historical contexts of the available systems, and resources are set up to allow easy operation, and even casual use, by researchers, teachers, students, and artists.

  2. [Management of human resources, materials, and organization processes in radioprotection].

    Science.gov (United States)

    Coppola, V

    1999-06-01

    The radiologist must learn to face daily management responsibilities and therefore he/she needs the relevant knowledge. Aside from the mechanisms of management accounting, which differ only slightly from similar analysis methods used in other centers, the managing radiologist (the person in charge) is directly responsible for planning, organizing, coordinating and controlling radiation protection, a major discipline characterizing diagnostic imaging. We will provide some practical management hints, keeping in mind that radiation protection must not be considered a simple (or annoying) technical task, but rather an extraordinary positive element for the radiologist's cultural differentiation and professional identity. The managing radiologist can use the theory and practice of management techniques successfully applied in business, customizing them to the ethics and economics of health care. Meeting the users' needs must obviously prevail on balancing the budget from both a logical and an accounting viewpoints, since non-profit organizations are involved. In radiological practice, distinguishing the management of human from structural resources (direct funding is not presently available) permits to use internal benchmarking for the former and controlled acquisition and planned replacement of technologies in the latter, obviously after evaluation of specific indicators and according to the relevant laws and technical guidelines. Managing human resources means safeguarding the patient, the operator and the population, which can be achieved or improved using benchmarking in a diagnostic imaging department. The references for best practice will be set per tabulas based on the relevant laws and (inter)national guidelines. The physical-technical and bureaucratic-administrative factors involved will be considered as process indices to evaluate the gap from normal standards. Among the different elements involved in managing structural resources, the appropriate acquisition

  3. The Resource Control Debate: Enthroning Parasitism or Instituting ...

    African Journals Online (AJOL)

    User

    ISSN 1994-9057 (Print). ISSN 2070--0083 (Online) ... considering materials as resources, it is imperative that the useful purpose of satisfying human needs in ..... advantage to the region in terms of resource allocation. The North it is argued has ...

  4. Strategically oriented management and controlling of resource intensive projects

    International Nuclear Information System (INIS)

    Kemmeter, Sascha

    2015-01-01

    The book on strategically oriented management and controlling of resource intensive projects covers the following issues: frame of project management and project controlling, classification of the decommissioning of nuclear facilities as resource intensive projects, research design for case studies, results of the study of project management specific characteristics of decommissioning, reference model for the project management of nuclear facility decommissioning.

  5. Development of nuclear material accountancy control system

    International Nuclear Information System (INIS)

    Hirosawa, Naonori; Kashima, Sadamitsu; Akiba, Mitsunori

    1992-01-01

    PNC is developing a wide area of nuclear fuel cycle. Therefore, much nuclear material with a various form exists at each facility in the Works, and the controls of the inventory changes and the physical inventories of nuclear material are important. Nuclear material accountancy is a basic measure in safeguards system based on Non-Proliferation Treaty (NPT). In the light of such importance of material accountancy, the data base of nuclear material control and the material accountancy report system for all facilities has been developed by using the computer. By this system, accountancy report to STA is being presented certainly and timely. Property management and rapid corresponding to various inquiries can be carried out by the data base system which has free item searching procedure. (author)

  6. Controlling user access to electronic resources without password

    Science.gov (United States)

    Smith, Fred Hewitt

    2015-06-16

    Described herein are devices and techniques for remotely controlling user access to a restricted computer resource. The process includes pre-determining an association of the restricted computer resource and computer-resource-proximal environmental information. Indicia of user-proximal environmental information are received from a user requesting access to the restricted computer resource. Received indicia of user-proximal environmental information are compared to associated computer-resource-proximal environmental information. User access to the restricted computer resource is selectively granted responsive to a favorable comparison in which the user-proximal environmental information is sufficiently similar to the computer-resource proximal environmental information. In at least some embodiments, the process further includes comparing user-supplied biometric measure and comparing it with a predetermined association of at least one biometric measure of an authorized user. Access to the restricted computer resource is granted in response to a favorable comparison.

  7. Controlling the discharge of molten material

    International Nuclear Information System (INIS)

    Geel, J. van; Dobbels, F.; Theunissen, W.

    1980-01-01

    A method and device are described for controlling the discharge of molten material from a melter or an intermediate vessel, in which a primary outflow is fed to an overflow system, the working level of which is regulated by means of pneumatic pressure on a communicating chamber pertaining to the overflow system. Molten material may be led into a primary overflow by means of a pneumatic lift. The material melted may be a glass used for disposing of radioactive liquid wastes. (author)

  8. Materials contamination control in the microelectronic industry

    International Nuclear Information System (INIS)

    Tardif, F.

    1993-01-01

    This paper deals with many aspects of the contamination of materials in the microelectronic industry. The contamination's control of chemicals, process gases, silicon and the survey of the ions free water's purity are treated. (TEC). 29 figs., 7 tabs

  9. Minicomputer based, controlled materials information system

    International Nuclear Information System (INIS)

    Roberts, N.; Jessen, T.; Meadors, O.; Seibel, D.

    1976-01-01

    The LLL, Materials Management Group and Data Processing Services have developed a transaction-oriented, minicomputer system for the management of the Laboratory's controlled materials. The system consists of a multi-vendor hardware system designed for ease of operation, maximum reliability, and quick response and the requirements imposed on the hardware and software systems are discussed

  10. Infection control practice in countries with limited resources

    Directory of Open Access Journals (Sweden)

    Alp Emine

    2011-10-01

    Full Text Available Abstract Nosocomial infections and their control are a world-wide challenge. The prevalence of nosocomial infections is generally higher in developing countries with limited resources than industrialized countries. In this paper we aimed to further explain the differences with regard to infection control challenges between Turkey, a country with "limited" resources, and the Netherlands, a country with "reasonable" resources. Infrastructure of hospitals, low compliance of hand hygiene, understaffing, overcrowding, heavy workload, misuse of personal protective equipments, late establishment of infection control programme are major problems in limited-resources countries. These problems cause high infection rates and spread of multi-drug resistant pathogens. To improve the control and prevention of infections in countries with limited resources, a multi-facet approach is needed.

  11. Controlled maritime storage of noxious materials

    International Nuclear Information System (INIS)

    1984-01-01

    The invention relates to an accommodation for the controlled storage of noxious material, especially of radioactive material packed in vessels. The invention provides a storage accommodation far from populated regions, in which this material may be stored during a long period in a safe and controlled way and from which it may be winned back in a simple and cheap way. For that purpose, a floating and submersible construction is designed that may be let down to the sea-bottom at least partially and that is fitted with a closable entrance. (Auth.)

  12. IMPROVING THE ORGANIZATION RATIONING OF MATERIAL RESOURCES IN AN INDUSTRIAL PLANT

    Directory of Open Access Journals (Sweden)

    N. V. Baturova

    2010-01-01

    Full Text Available Main directions to be followed to improve the material resources rationing system at an industrial enterprise are discussed. Particular attention should be paid to factors that determine utilization efficiency of the resources.

  13. Housing Quality and Access to Material and Learning Resources within the Home Environment in Developing Countries

    Science.gov (United States)

    Bradley, Robert H.; Putnick, Diane L.

    2012-01-01

    This study examined home environment conditions (housing quality, material resources, formal and informal learning materials) and their relations with the Human Development Index (HDI) in 28 developing countries. Home environment conditions in these countries varied widely. The quality of housing and availability of material resources at home were…

  14. Operational advanced materials control and accountability system

    International Nuclear Information System (INIS)

    Malanify, J.J.; Bearse, R.C.; Christensen, E.L.

    1980-01-01

    An accountancy system based on the Dynamic Materials Accountability (DYMAC) System has been in operation at the Plutonium Processing Facility at the Los Alamos Scientific Laboratory (LASL) since January 1978. This system, now designated the Plutonium Facility/Los Alamos Safeguards System (PF/LASS), has enhanced nuclear material accountability and process control at the LASL facility. The nondestructive assay instruments and the central computer system are operating accurately and reliably. As anticipated, several uses of the system have developed in addition to safeguards, notably scrap control and quality control. The successes of this experiment strongly suggest that implementation of DYMAC-based systems should be attempted at other facilities. 20 refs

  15. Reinforcement learning techniques for controlling resources in power networks

    Science.gov (United States)

    Kowli, Anupama Sunil

    As power grids transition towards increased reliance on renewable generation, energy storage and demand response resources, an effective control architecture is required to harness the full functionalities of these resources. There is a critical need for control techniques that recognize the unique characteristics of the different resources and exploit the flexibility afforded by them to provide ancillary services to the grid. The work presented in this dissertation addresses these needs. Specifically, new algorithms are proposed, which allow control synthesis in settings wherein the precise distribution of the uncertainty and its temporal statistics are not known. These algorithms are based on recent developments in Markov decision theory, approximate dynamic programming and reinforcement learning. They impose minimal assumptions on the system model and allow the control to be "learned" based on the actual dynamics of the system. Furthermore, they can accommodate complex constraints such as capacity and ramping limits on generation resources, state-of-charge constraints on storage resources, comfort-related limitations on demand response resources and power flow limits on transmission lines. Numerical studies demonstrating applications of these algorithms to practical control problems in power systems are discussed. Results demonstrate how the proposed control algorithms can be used to improve the performance and reduce the computational complexity of the economic dispatch mechanism in a power network. We argue that the proposed algorithms are eminently suitable to develop operational decision-making tools for large power grids with many resources and many sources of uncertainty.

  16. Regulation on control of nuclear fuel materials

    International Nuclear Information System (INIS)

    Ikeda, Kaname

    1976-01-01

    Some comment is made on the present laws and the future course of consolidating the regulation of nuclear fuel materials. The first part gives the definitions of the nuclear fuel materials in the laws. The second part deals with the classification and regulation in material handling. Refinement undertaking, fabrication undertaking, reprocessing undertaking, the permission of the government to use the materials, the permission of the government to use the materials under international control, the restriction of transfer and receipt, the reporting, and the safeguard measures are commented. The third part deals with the strengthening of regulation. The nuclear fuel safety deliberation special committee will be established at some opportunity of revising the ordinance. The nuclear material safeguard special committee has been established in the Atomic Energy Commission. The last part deals with the future course of legal consolidation. The safety control will be strengthened. The early investigation of waste handling is necessary, because low level solid wastes are accumulating at each establishment. The law for transporting nuclear materials must be consolidated as early as possible to correspond to foreign transportation laws. Physical protection is awaiting the conclusions of the nuclear fuel safeguard special committee. The control and information systems for the safeguard measures must be consolidated in the laws. (Iwakiri, K.)

  17. Hierarchical Model Predictive Control for Resource Distribution

    DEFF Research Database (Denmark)

    Bendtsen, Jan Dimon; Trangbæk, K; Stoustrup, Jakob

    2010-01-01

    units. The approach is inspired by smart-grid electric power production and consumption systems, where the flexibility of a large number of power producing and/or power consuming units can be exploited in a smart-grid solution. The objective is to accommodate the load variation on the grid, arising......This paper deals with hierarchichal model predictive control (MPC) of distributed systems. A three level hierachical approach is proposed, consisting of a high level MPC controller, a second level of so-called aggregators, controlled by an online MPC-like algorithm, and a lower level of autonomous...... on one hand from varying consumption, on the other hand by natural variations in power production e.g. from wind turbines. The approach presented is based on quadratic optimization and possess the properties of low algorithmic complexity and of scalability. In particular, the proposed design methodology...

  18. NATURAL RESOURCE ABUNDANCE, EXPLOITATION AND AGITATION FOR RESOURCE CONTROL IN NIGERIA’S NIGER DELTA: A MARXIAN ANALYSIS

    Directory of Open Access Journals (Sweden)

    Ogaboh AGBA

    2014-06-01

    Full Text Available Prolonged agitation for resource control in Nigeria’s Niger Delta has attracted increasing attention of academia and policy makers. Key issues are involved-fiscal federalism principles, resource control agitation strategies/intensities and politico-philosophical bases within constitutional and theoretical frameworks, past and present governments’ efforts aimed at resolving agitations by Niger Delta peoples for resource control have been examined from various traditional disciplinary perspectives in social sciences and humanities. This study explains conflicting postures of resources control, and dynamics of the struggle by applying fragments of the revolutionary Marxist ideology/ frameworks comprising Gramscian, Dialectical Materialism and the Frankfort School’s Critical Social and Neo-Marxist (conflict theoretical perspectives espoused by Lewis Coser and C. Wright Mills. We argue that sections of Nigeria’s laws (the Constitution, and 1978 Land Use Act that vested absolute land ownership/control authority on Nigeria’s Federal Government, among other obnoxious laws that promote marginalization of particular oppressed sections/strata of Nigeria’s population thereby provoking persistent conflicts, such laws are overdue for amendment. We recommend, among others, that: non-exploitative variety of federalism applied in Scandinavia (Norway, Switzerland, etc. should be implemented in Nigeria.

  19. Control of Resources for Economic Development in Food Networks

    DEFF Research Database (Denmark)

    Brink, Tove

    2010-01-01

    The challenge of economic development in the 21st century is linked to innovation. Enabling innovation contains a wide span from the new idea to learning how to provide value through the new idea and continuing to how to control resources to perform at prime. The focus in this paper is set on how...... to control resources for innovation to add value and economic development. This paper reveals how crossing dynamic composite underlying boundaries can have an impact on control of resources for economic development in food networking SMEs .The analyses in this paper shows the broad and significant impact....... Connections are revealed to have no significant influence on the internal control of resources but a significant direct influence on economic development through value chain activities. Through the analyses in this paper the notion of ‘boundary utility’ is elaborated as the crossing and transformation...

  20. Resource-aware control and dynamic scheduling in CPS

    NARCIS (Netherlands)

    Heemels, W.P.M.H.

    2015-01-01

    Recent developments in computer and communication technologies are leading to an increasingly networked and wireless world. This raises new challenging questions in the context of control for cyberphysical systems (CPS), especially when the computation, communication, energy and actuation resources

  1. Material control: Problems in assessing effectiveness

    International Nuclear Information System (INIS)

    Sanborn, J.

    1989-01-01

    This paper discusses the evaluation of material accounting and control systems at facilities processing large quantities of strategic nuclear materials. The subject is timely because of the content of new orders and procedures adopted by the U.S. Department of Energy (DOE), in particular the performance requirements in DOE order 5633.3. This order requires the contractor to demonstrate specified levels of detection probability by the safeguards system for actions involving the attempted removal of specified target quantities of material from a facility. The paper reviews some of the difficulties involved in developing methods for determining adequacy with respect to this and similar requirements

  2. INVESTMENT ASPECT IN MATERIAL INCENTIVE OF HUMAN RESOURCES

    Directory of Open Access Journals (Sweden)

    Potasheva Galina Anatol’evna

    2017-03-01

    Full Text Available Value of intellectual resources in modern economy due to which the assets of human resources became one of the factors of formation of value of systems on the basis of their investing, is considered. Adequate evaluation of employees’ activities as one of the basic resources will make it possible to meet competition under conditions of "survival" through periodic formation of socio-economic profile and stimulation of investment in human resources on the basis of the following technologies: formation of a balanced scorecard system, creation of a mechanism of formation and distribution of labour compensation funds, use of the golden section principle. Establishment of wages according to the golden section principle contributes to the stability and commitment of employees and increase of efficiency of investments in human resources, provided that it doubles the sales volume and should accordingly increase the wages of each employee by a factor of 1.62. Statistical analysis demonstrated that organizations that work using the golden section principle increased the labour productivity on average by 10-20 %, augmented the turnover by a factor of 1.3–1.5, minimized the costs by 15-20 %. Application of the golden section technology creates conditions necessary for economic growth on the basis of efficiency of investments in human resources.

  3. Tracing and control of raw materials sourcing for vaccine manufacturers.

    Science.gov (United States)

    Faretra Peysson, Laurence

    2010-05-01

    The control of the raw materials used to manufacture vaccines is mandatory; therefore, a very clear process must be in place to guarantee that raw materials are traced. Those who make products or supplies used in vaccine manufacture (suppliers of culture media, diagnostic tests, etc.) must apply quality systems proving that they adhere to certain standards. ISO certification, Good Manufacturing Practices for production sites and the registration of culture media with a 'Certificate of Suitability' from the European Directorate for the Quality of Medicines and Healthcare are reliable quality systems pertaining to vaccine production. Suppliers must assure that each lot of raw materials used in a product that will be used in vaccine manufacture adheres to the level of safety and traceability required. Incoming materials must be controlled in a single 'Enterprise Resource Planning' system which is used to document important information, such as the assignment of lot number, expiration date, etc. Ingredients for culture media in particular must conform to certain specifications. The specifications that need to be checked vary according to the ingredient, based on the level of risk. The way a raw material is produced is also important, and any aspect relative to cross-contamination, such as the sanitary measures used in producing and storing the raw material must be checked as well. In addition, suppliers can reduce the risk of viral contamination of raw materials by avoiding purchases in countries where a relevant outbreak is currently declared. 2010 The International Association for Biologicals. Published by Elsevier Ltd. All rights reserved.

  4. Design of POLCA material control systems

    NARCIS (Netherlands)

    Riezebos, J.

    2010-01-01

    POLCA is a material control system designed for make-to-order or engineer-to-order companies. These firms have to cope with a high variety of customised products, and strong pressure to provide short throughput times. POLCA constrains the amount of work in progress on the shop floor in order to

  5. Computer information resources of inorganic chemistry and materials science

    Energy Technology Data Exchange (ETDEWEB)

    Kiselyova, N N; Dudarev, V A; Zemskov, V S [A.A.Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, Moscow (Russian Federation)

    2010-02-28

    Information systems used in inorganic chemistry and materials science are considered. The following basic trends in the development of modern information systems in these areas are highlighted: access to information via the Internet, merging of documental and factual databases, involvement of experts in the evaluation of the data reliability, supplementing databases with information analysis tools on the properties of inorganic substances and materials.

  6. Computer information resources of inorganic chemistry and materials science

    International Nuclear Information System (INIS)

    Kiselyova, N N; Dudarev, V A; Zemskov, V S

    2010-01-01

    Information systems used in inorganic chemistry and materials science are considered. The following basic trends in the development of modern information systems in these areas are highlighted: access to information via the Internet, merging of documental and factual databases, involvement of experts in the evaluation of the data reliability, supplementing databases with information analysis tools on the properties of inorganic substances and materials.

  7. Citizenship Education: Instructional Materials/Resources for High School Citizenship.

    Science.gov (United States)

    Kinoshita, Jane

    This resource guide contains six units of study on citizenship education for use at the secondary level. The purpose of the units is to help students examine the political and legal processes of American society and the rights, responsibilities, and roles of its citizens. The units can be used as the basis for a one-semester elective course in…

  8. [Research on resources chemistry of Chinese medicinal materials and resources recycling utilization ways and goals and tasks].

    Science.gov (United States)

    Duan, Jin-ao; Su, Shu-lan; Guo, Sheng; Jiang, Shu; Liu, Pei; Yan, Hui; Qian, Da-wei; Zhu, Hua-xu; Tang, Yu-ping; Wu, Qi-nan

    2015-09-01

    The objects of research on the resources chemistry of Chinese medicinal materials (RCCMM) are promotion of efficient production, rational utilization and improving quality of CMM and natural products. The development of TCM cause depends on the efficient utilization and sustainable development of CMM, hinges on the technologies and methods for using and discovering medicinal biological resources, stand or fall on the extension of industy chains, detailed utilizaion of resource chemical components by multi-way, multi-level. All of these may help to the recycling utilization and sound development of RCMM. In this article, five respects were discussed to the RCCMM researches and resources recycling utilization ways and goals and tasks. First, based on the principle of resource scarcity, discovering or replacing CMM resources, protecting the rare or endangered species or resources. Second, based on the multifunctionality of CMM, realizing the value-added and value compensation, and promoting the utilization efficiency through systermatic and detailed exploitation and utilization. Third, based on the resource conservation and environment-friendly, reducing raw material consumption, lowering cost, promoting recycling utilization and elevating utilization efficiency. Fourth, based on the stratege of turning harm into good, using the invasive alien biological resources by multi-ways and enriching the medicial resources. Fifth, based on the method of structure modification of chemical components, exploring and enhancing the utility value of resouces chemical substances. These data should provide references and attention for improving the utilization efficiency, promoting the development of recycling economy, and changing the mode of economic growth of agriculture and industry of CMM fundamentally.

  9. Strategy and implementation of resources control of key equipments in nuclear power plant

    International Nuclear Information System (INIS)

    Zha Qing

    2014-01-01

    The strategic resources of the construction of nuclear power plant, which include the main equipment of nuclear island, heavy forgings, the bottleneck equipment and strategic materials, is one of the key issues in the construction of nuclear power projects. The control of these strategic resources has become the focus of competition in industry and the major nuclear power groups are willing to fight for this huge advantages. The resource control strategies of key equipment of nuclear power projects are analyzed in this paper. This paper put forward specific measures and methods for the strategic resources control. By the application to a plurality of nuclear power engineering construction projects, these specific measures and methods achieved good results and will be with important guidance and reference for the construction of future nuclear power projects in China. (author)

  10. Tuningless Load Frequency Control Through Active Engagement of Distributed Resources

    DEFF Research Database (Denmark)

    Prostejovsky, Alexander; Marinelli, Mattia; Rezkalla, Michel M.N.

    2017-01-01

    system dynamics. Second, primary resources are actively involved in frequency restoration by systematic adjustment of their frequency reference setpoints. In contrast to the commonly used Automatic Generation Control (AGC), the proposed Direct Load Frequency Control (DLFC) does not require an integrator...

  11. Infection control practice in countries with limited resources.

    NARCIS (Netherlands)

    Alp, E.; Leblebicioglu, H.; Doganay, M.; Voss, A.

    2011-01-01

    Nosocomial infections and their control are a world-wide challenge. The prevalence of nosocomial infections is generally higher in developing countries with limited resources than industrialized countries. In this paper we aimed to further explain the differences with regard to infection control

  12. Materials Challenges and Testing for Supply of Energy and Resources

    CERN Document Server

    Bollinghaus, Thomas

    2012-01-01

    One major goal of the World Materials Research Institute Forum - WMRIF is to promote young scientists in the field of materials science and engineering. To enhance the international knowledge exchange between young postdoctoral scientists all over the world, WMRIF meanwhile regularly organizes joint workshops among the member institutes. These workshops also represent an increasingly appreciated platform to get known to each other and to build co-operations. For such workshops, various topics are selected, pointing to future perspectives and challenges in the field of Materials Science and Eng

  13. The American Slave Narrative: Exciting Resource Material for the Classroom

    Science.gov (United States)

    Polsky, Milton

    1975-01-01

    An exploration of the educational value of the American slave narrative, offering suggestions as to how these materials can be integrated with a variety of classroom activities--music, art, writing, debate, dramatization and dance. (EH)

  14. Improving the Status of Human and Material Resources in Public ...

    African Journals Online (AJOL)

    Nekky Umera

    Public Primary Schools in Oyo States towards Achieving the. Millennium ... projected instructional materials such as computers, counselling centres as well as ... for their children to receive basic education in order to achieve one of the goals of ...

  15. Multidimensional optimal droop control for wind resources in DC microgrids

    Science.gov (United States)

    Bunker, Kaitlyn J.

    Two important and upcoming technologies, microgrids and electricity generation from wind resources, are increasingly being combined. Various control strategies can be implemented, and droop control provides a simple option without requiring communication between microgrid components. Eliminating the single source of potential failure around the communication system is especially important in remote, islanded microgrids, which are considered in this work. However, traditional droop control does not allow the microgrid to utilize much of the power available from the wind. This dissertation presents a novel droop control strategy, which implements a droop surface in higher dimension than the traditional strategy. The droop control relationship then depends on two variables: the dc microgrid bus voltage, and the wind speed at the current time. An approach for optimizing this droop control surface in order to meet a given objective, for example utilizing all of the power available from a wind resource, is proposed and demonstrated. Various cases are used to test the proposed optimal high dimension droop control method, and demonstrate its function. First, the use of linear multidimensional droop control without optimization is demonstrated through simulation. Next, an optimal high dimension droop control surface is implemented with a simple dc microgrid containing two sources and one load. Various cases for changing load and wind speed are investigated using simulation and hardware-in-the-loop techniques. Optimal multidimensional droop control is demonstrated with a wind resource in a full dc microgrid example, containing an energy storage device as well as multiple sources and loads. Finally, the optimal high dimension droop control method is applied with a solar resource, and using a load model developed for a military patrol base application. The operation of the proposed control is again investigated using simulation and hardware-in-the-loop techniques.

  16. Materials control and accountability auditor training

    International Nuclear Information System (INIS)

    Barham, M.A.

    1993-01-01

    As the Department of Energy (DOE) works to standardize the training for individuals performing materials control and accountability (MC and A) functions, the need for a definition of the appropriate training for MC and A auditors has become apparent. In order to meet the DOE requirement for individual training plans for all staff performing MC and A functions, the following set of guidelines was developed for consideration as applicable to MC and A auditors. The application of these guidelines to specific operating environments at individual DOE sites may require modification to some of the tables. The paper presents one method of developing individual training programs for an MC and A auditor or for an MC and A audit group based on the requirements for internal audits and assessments included in DOE Order 5633.3, Control and Accountability for Nuclear Materials

  17. Fuzzy controllers in nuclear material accounting

    International Nuclear Information System (INIS)

    Zardecki, A.

    1994-01-01

    Fuzzy controllers are applied to predicting and modeling a time series, with particular emphasis on anomaly detection in nuclear material inventory differences. As compared to neural networks, the fuzzy controllers can operate in real time; their learning process does not require many iterations to converge. For this reason fuzzy controllers are potentially useful in time series forecasting, where the authors want to detect and identify trends in real time. They describe an object-oriented implementation of the algorithm advanced by Wang and Mendel. Numerical results are presented both for inventory data and time series corresponding to chaotic situations, such as encountered in the context of strange attractors. In the latter case, the effects of noise on the predictive power of the fuzzy controller are explored

  18. Controlling Thermal Conduction by Graded Materials

    Science.gov (United States)

    Ji, Qin; Huang, Ji-Ping

    2018-04-01

    Manipulating thermal conductivities are fundamentally important for controlling the conduction of heat at will. Thermal cloaks and concentrators, which have been extensively studied recently, are actually graded materials designed according to coordinate transformation approaches, and their effective thermal conductivity is equal to that of the host medium outside the cloak or concentrator. Here we attempt to investigate a more general problem: what is the effective thermal conductivity of graded materials? In particular, we perform a first-principles approach to the analytic exact results of effective thermal conductivities of materials possessing either power-law or linear gradation profiles. On the other hand, by solving Laplace’s equation, we derive a differential equation for calculating the effective thermal conductivity of a material whose thermal conductivity varies along the radius with arbitrary gradation profiles. The two methods agree with each other for both external and internal heat sources, as confirmed by simulation and experiment. This work provides different methods for designing new thermal metamaterials (including thermal cloaks and concentrators), in order to control or manipulate the transfer of heat. Support by the National Natural Science Foundation of China under Grant No. 11725521, by the Science and Technology Commission of Shanghai Municipality under Grant No. 16ZR1445100

  19. Experience with dynamic material control subsystems

    International Nuclear Information System (INIS)

    Severe, W.R.; Hagen, J.; Siebelist, R.; Wagner, R.P.; Olson, W.M.

    1977-01-01

    Operation of a Dynamic Material Control (DYMAC) prototype system has yielded some useful information for installing the final system. We discovered a bias between two methods for measuring filtrates. Evaluation of a unit process dynamic balance brought to light an operating procedure that weakens the accountability goals of the DYMAC system. We were able to correct both situations for the final system and learned that we must regularly monitor the system once it is operational for similar discrepancies

  20. Biomimetic materials for controlling bone cell responses.

    Science.gov (United States)

    Drevelle, Olivier; Faucheux, Nathalie

    2013-01-01

    Bone defects that cannot "heal spontaneously during life" will become an ever greater health problem as populations age. Harvesting autografts has several drawbacks, such as pain and morbidity at both donor and acceptor sites, the limited quantity of material available, and frequently its inappropriate shape. Researchers have therefore developed alternative strategies that involve biomaterials to fill bone defects. These biomaterials must be biocompatible and interact with the surrounding bone tissue to allow their colonization by bone cells and blood vessels. The latest generation biomaterials are not inert; they control cell responses like adhesion, proliferation and differentiation. These biomaterials are called biomimetic materials. This review focuses on the development of third generation materials. We first briefly describe the bone tissue with its cells and matrix, and then how bone cells interact with the extracellular matrix. The next section covers the materials currently used to repair bone defects. Finally, we describe the strategies employed to modify the surface of materials, such as coating with hydroxyapatite and grafting biomolecules.

  1. Improving the Status of Human and Material Resources in Public ...

    African Journals Online (AJOL)

    libraries, well-equipped first aid centres, adequate electronically projected instructional materials such as computers, counselling centres as well as recreational facilities among others. Based on this discovery, it was recommended that the government of the State should provide these facilities in public primary schools in ...

  2. Control cards as a statistical quality control resource

    Directory of Open Access Journals (Sweden)

    Aleksandar Živan Drenovac

    2013-02-01

    Full Text Available Normal 0 false false false MicrosoftInternetExplorer4 This paper proves that applying of statistical methods can significantly contribute increasing of products and services quality, as well as increasing of institutions rating. Determining of optimal, apropos anticipatory and limitary values, is based on sample`s statistical analyze. Control cards represent very confident instrument, which is simple for use and efficient for control of process, by which process is maintained in set borders. Thus, control cards can be applied in quality control of procesess of weapons and military equipment production, maintenance of technical systems, as well as for seting of standards and increasing of quality level for many other activities.

  3. Performance-oriented packagings for hazardous materials: Resource guide

    International Nuclear Information System (INIS)

    1993-09-01

    This document provides recommendations to US Department of Energy (DOE) shippers regarding packaging that meet performance-oriented packaging requirements implemented by US Department of Transportation (DOT) in rulemaking HM-181 (December 21, 1990) and subsequent actions. The packaging described in this document are certified by their vendor to comply with requirements for Packing Group I, II, or III hazardous materials packaging. The intent of this document is to share information between DOE and contractors and at all DOE facilities

  4. Energy and resource saving raw materials for dactyloscopy

    Directory of Open Access Journals (Sweden)

    Ikonnikova Lyubov F.

    2014-01-01

    Full Text Available The “developing” properties of ferromagnetic fingerprint powders are defined by the chemical nature and the particle sizes of the pigment which form acidity of its surface, adhesive and magnetic properties, and color spectrum. The optimum ratio of these physical and chemical parameters is observed in the pigment consisting of iron-containing sludge tempered at 800°C, which contains α-Fe2O3 and impurity of clay materials.

  5. Performance-oriented packagings for hazardous materials: Resource guide

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    This document provides recommendations to US Department of Energy (DOE) shippers regarding packaging that meet performance-oriented packaging requirements implemented by US Department of Transportation (DOT) in rulemaking HM-181 (December 21, 1990) and subsequent actions. The packaging described in this document are certified by their vendor to comply with requirements for Packing Group I, II, or III hazardous materials packaging. The intent of this document is to share information between DOE and contractors and at all DOE facilities.

  6. Resource planning of solid waste materials through process modelling as contribution to sustainable resource management; Ressourcenplanung fester Abfallstoffe mit Hilfe der Prozessmodellierung als Beitrag zum nachhaltigen Ressourcenmanagement

    Energy Technology Data Exchange (ETDEWEB)

    Pehlken, Alexandra [Bremen Univ. (Germany). BIK, Institut fuer integrierte Produktentwicklung

    2010-10-15

    Raw materials are essential to satisfy our needs in energy and products. Many raw materials are restricted and far away from being endless available; therefore there is a strong intention of developing raw material- and energy-efficient production processes. Recycling processes provide a substantial contribution to sustainable resource management due to the supply of valuable secondary raw materials for new applications. Processing solid waste materials generate new secondary resources from residues as resources for new products. This saves primary resources and keeps up a long material life cycle. But material characterisation is an important issue to look at. Material properties ascertain the following application possibilities. It has to be noted that no processing technique can guarantee solely material flows with properties to substitute primary raw materials. There are always material flows that are of minor quality. This makes it difficult to assess the future potential of secondary raw materials to be available for following applications with specific quality demands. (orig.)

  7. Croatian National System of Nuclear Materials Control

    International Nuclear Information System (INIS)

    Biscan, R.

    1998-01-01

    In the process of economic and technological development of Croatia by using or introducing nuclear power or in the case of international co-operation in the field of peaceful nuclear activities, including international exchange of nuclear material, Croatia should establish and implement National System of Nuclear Materials Control. Croatian National System of accounting for and control of all nuclear material will be subjected to safeguards under requirements of Agreement and Additional Protocol between the Republic of Croatia and the International Atomic Energy Agency (IAEA) for the Application of Safeguards in Connection with the Treaty on the Non-Proliferation of Nuclear Weapons (NPT). The decision by NPT parties at the 1995 NPT Review and Extension Conference to endorse the Fullscope IAEA Safeguards Standard (FSS) as a necessary precondition of nuclear supply means that states are obliged to ensure that the recipient country has a FSS agreement in place before any nuclear transfer can take place (Ref. 1). The FSS standard of nuclear supply is a central element of the Nuclear Suppliers Group (NSG) Guidelines which the NSG adopted in 1992 and should be applied to members and non-members of the NSG. The FSS standard of nuclear supply in general allows for NPT parties or countries which have undertaken the same obligations through other treaty arrangements, to receive favourable treatment in nuclear supply arrangements. However, the Iraqi experience demonstrate that trade in nuclear and dual-use items, if not properly monitored, can contribute to a nuclear weapons program in countries acting contrary to their non-proliferation obligation. Multilateral nuclear export control mechanisms, including the FSS supply standard, provide the basis for co-ordination and standardisation of export control measures. (author)

  8. Computerized materials protection, control, and accountability

    International Nuclear Information System (INIS)

    Whiteson, R.; Seitz, S.; Landry, R.P.; Hadden, M.L.; Painter, J.A.

    1997-01-01

    The proliferation of nuclear weapons, along with the technical knowledge and materials needed to make these weapons, is an enduring problem of international urgency. Current international nuclear nonproliferation efforts are aimed at deterring, detecting, and responding to proliferation of weapons of mass destruction. These safeguards efforts are being implemented by applying preeminent science and technology to the management and control of nuclear materials. By strengthening systems of nuclear material protection, control, and accountability (MPC and A), one can reduce the threat of nuclear weapons proliferation. Two major programs of international cooperation are now underway to achieve this goal. The first is between the US Department of Energy (DOE) and the Institutes of the Russian Federation (Laboratory-to-Laboratory Program), and the second is between the US Government and Governments of the former Soviet Republics (Government-to-Government Program). As part of these programs, the DOE is working with facilities to assist them in implementing computerized MPC and A systems. This work is a collaboration between computer scientists and safeguards experts in both the US and the new Republics. The US is making available technology and expertise to enable Russian experts to build on computerized MPC and A software developed in the US. This paper describes the joint efforts of these international teams to develop sophisticated computerized MPC and A systems using modern computer hardware and software technology. These systems are being customized to meet the site-specific needs of each facility

  9. Equality in the distribution of health material and human resources in Guangxi: evidence from Southern China.

    Science.gov (United States)

    Sun, Jian

    2017-08-29

    The aim of this study was to assess the equality in the distribution of health material and human resources in Guangxi, and put forward proposal to improve the equality status of the health material and human resources. We used concentration index to evaluate the degree of income-related equality of health material and human resources. The concentration index values of the five resources ranged from -0.0847 to 0.1416 from 2011 to 2015. Health institution was concentrated among the poorer populations, while other four resources were concentrated among the richer populations. Overall, the equality status of health institutions, health care beds, health technical personnel, and certified nurses got better from 2011 to 2015. However, the equality status of practicing physicians has got worse since 2014.

  10. Resource management in Diffserv measurement-based admission control PHR

    NARCIS (Netherlands)

    Westberg, L.; Heijenk, Geert; Karagiannis, Georgios; Oosthoek, S.; Partain, D.; Rexhepi, Vlora; Szabo, R.; Wallentin, P.; El Allali, H.

    2002-01-01

    The purpose of this draft is to present the Resource Management in Diffserv (RMD) Measurement-Based Admission Control (RIMA) Per Hop Reservation (PHR) protocol. The RIMA PHR protocol is used on a per-hop basis in a Differentiated Services (Diffserv) domain and extends the Diffserv Per Hop Behavior

  11. A Sociobiological Analysis Of Resource Control Issues | Nnadi ...

    African Journals Online (AJOL)

    Adopting the stand point that humans are part of the animal kingdom, the sociobiological phenomena of metamorphosis, aggression and territoriality are introduced into the fray. They are then juxtaposed to the issue of resource control and applied to improve understanding and, hopefully, management of the former.

  12. Resource Control: A Translocation Of The Scramble For Africa ...

    African Journals Online (AJOL)

    Adopting a theoretical framework successfully adapted from the biological and medical sciences, namely; translocation analysis, the paper traces the ancestry of the present resource control problem to the scramble, first, and then, the use of fiscal and revenue allocation commissions during the colonial era, and the ...

  13. Problems Of Resource Control In Nigeria And The Way Forward ...

    African Journals Online (AJOL)

    In recent times, the issues of Resources Control in Nigeria have generated a lot of controversies. In discussing these issues, this paper focuses primarily on Crude Oil and its allied products from an historic standpoint, the issues of Federalism, Inter-governmental Relations in Nigeria, Fiscal federalism and the distribution of ...

  14. Quality control and characterization of bentonite materials

    International Nuclear Information System (INIS)

    Kiviranta, L.; Kumpulainen, S.

    2011-12-01

    Before bentonite material is taken into use in performance testing, the quality of the material needs to be checked. Three high grade bentonite materials: two natural Nabentonites from Wyoming, and one natural Ca-bentonite from Milos, were characterized. Each material was characterized using duplicate or triplicate samples in order to study variability in material quality in batches. The procedure consisted of basic acceptance testing (water ratio, CEC, swelling index, liquid limit, and granule size distribution), advanced acceptance testing (exchangeable cations, chemical and mineralogical composition, density, swelling pressure and hydraulic conductivity) and complementary testing (herein surface area, water absorption capacity, montmorillonite composition, grain size distribution and plastic limit). All three materials qualified the requirements set for buffer bentonite for CEC, smectite content, swelling pressure, and hydraulic conductivity. Wyoming bentonites contained approximately 88 wt.% of smectite, and Milos bentonite 79 wt.% of smectite and 3 wt.% of illite. Precision of smectite analyses was ±2 %, and variances in composition of parallel samples within analytical errors, at least for Wyoming bentonites. Accuracy of quantitative analyses for trace minerals such as gypsum, pyrite or carbonates, was however low. As the concentrations of these trace minerals are important for Eh or pH buffering reactions or development of bentonite pore water composition, normative concentrations are recommended to be used instead of mineralogically determined concentrations. The swelling pressures and hydraulic conductivities of different materials were compared using EMDD. Swelling pressure was relatively higher for studied Cabentonite than for the studied Na-bentonites and the difference could not be explained with different smectite contents. Hydraulic conductivities seemed to be similar for all materials. The results of index tests correlated with the smectite content

  15. From materials control to astrophysics: metastable superconductors

    International Nuclear Information System (INIS)

    Waysand, G.

    1984-01-01

    The basic properties of metastable superconducting materials are reviewed: superheated domain, size of the granules, reading of the change of state. In the case of superheating, the phase transition can occur following two paths: a) increase of temperature (thermal nucleation) which allows an analysis of the calorimetric behavior for particle detection; b) increase of the applied magnetic field which allows the evaluation of surface defects promoting the nucleation of the normal state, and, more generally, the study of the superheated material as a disordered system. The thermal nucleation is useful for X-ray detection in non-destructive control as well as for the solar neutrino detection in real time. The magnetic nucleation is the basis for a proposal of detection of magnetic monopoles by induction [fr

  16. Feedback control and adaptive control of the energy resource chaotic system

    International Nuclear Information System (INIS)

    Sun Mei; Tian Lixin; Jiang Shumin; Xu Jun

    2007-01-01

    In this paper, the problem of control for the energy resource chaotic system is considered. Two different method of control, feedback control (include linear feedback control, non-autonomous feedback control) and adaptive control methods are used to suppress chaos to unstable equilibrium or unstable periodic orbits. The Routh-Hurwitz criteria and Lyapunov direct method are used to study the conditions of the asymptotic stability of the steady states of the controlled system. The designed adaptive controller is robust with respect to certain class of disturbances in the energy resource chaotic system. Numerical simulations are presented to show these results

  17. Control of nuclear material specified equipment and specified material

    International Nuclear Information System (INIS)

    1982-04-01

    The goal and application field of NE 2.02 regulatory guide of CNEN (Comissao Nacional de Energia Nuclear), are described. This regulatory guide is about nuclear material management, specified equipment and specified material. (E.G.) [pt

  18. Sustainable hybrid photocatalysts: titania immobilized on carbon materials derived from renewable and biodegradable resources

    Science.gov (United States)

    This review comprises the preparation, properties and heterogeneous photocatalytic applications of TiO2 immobilized on carbon materials derived from earth-abundant, renewable and biodegradable agricultural residues and sea food waste resources. The overview provides key scientifi...

  19. Smart material screening machines using smart materials and controls

    Science.gov (United States)

    Allaei, Daryoush; Corradi, Gary; Waigand, Al

    2002-07-01

    The objective of this product is to address the specific need for improvements in the efficiency and effectiveness in physical separation technologies in the screening areas. Currently, the mining industry uses approximately 33 billion kW-hr per year, costing 1.65 billion dollars at 0.05 cents per kW-hr, of electrical energy for physical separations. Even though screening and size separations are not the single most energy intensive process in the mining industry, they are often the major bottleneck in the whole process. Improvements to this area offer tremendous potential in both energy savings and production improvements. Additionally, the vibrating screens used in the mining processing plants are the most costly areas from maintenance and worker health and safety point of views. The goal of this product is to reduce energy use in the screening and total processing areas. This goal is accomplished by developing an innovative screening machine based on smart materials and smart actuators, namely smart screen that uses advanced sensory system to continuously monitor the screening process and make appropriate adjustments to improve production. The theory behind the development of Smart Screen technology is based on two key technologies, namely smart actuators and smart Energy Flow ControlT (EFCT) strategies, developed initially for military applications. Smart Screen technology controls the flow of vibration energy and confines it to the screen rather than shaking much of the mass that makes up the conventional vibratory screening machine. Consequently, Smart Screens eliminates and downsizes many of the structural components associated with conventional vibratory screening machines. As a result, the surface area of the screen increases for a given envelope. This increase in usable screening surface area extends the life of the screens, reduces required maintenance by reducing the frequency of screen change-outs and improves throughput or productivity.

  20. Dynamic Resource Allocation with the arcControlTower

    CERN Document Server

    Filipcic, Andrej; The ATLAS collaboration; Nilsen, Jon Kerr

    2015-01-01

    Distributed computing resources available for high-energy physics research are becoming less dedicated to one type of workflow and researchers’ workloads are increasingly exploiting modern computing technologies such as parallelism. The current pilot job management model used by many experiments relies on static dedicated resources and cannot easily adapt to these changes. The model used for ATLAS in Nordic countries and some other places enables a flexible job management system based on dynamic resources allocation. Rather than a fixed set of resources managed centrally, the model allows resources to be requested on the fly. The ARC Computing Element (ARC-CE) and ARC Control Tower (aCT) are the key components of the model. The aCT requests jobs from the ATLAS job management system (PanDA) and submits a fully-formed job description to ARC-CEs. ARC-CE can then dynamically request the required resources from the underlying batch system. In this paper we describe the architecture of the model and the experienc...

  1. CHEP2015: Dynamic Resource Allocation with arcControlTower

    CERN Document Server

    Filipcic, Andrej; The ATLAS collaboration; Nilsen, Jon Kerr

    2015-01-01

    Distributed computing resources available for high-energy physics research are becoming less dedicated to one type of workflow and researchers’ workloads are increasingly exploiting modern computing technologies such as parallelism. The current pilot job management model used by many experiments relies on static dedicated resources and cannot easily adapt to these changes. The model used for ATLAS in Nordic countries and some other places enables a flexible job management system based on dynamic resources allocation. Rather than a fixed set of resources managed centrally, the model allows resources to be requested on the fly. The ARC Computing Element (ARC-CE) and ARC Control Tower (aCT) are the key components of the model. The aCT requests jobs from the ATLAS job mangement system (Panda) and submits a fully-formed job description to ARC-CEs. ARC-CE can then dynamically request the required resources from the underlying batch system. In this paper we describe the architecture of the model and the experience...

  2. Future approaches to material control and accounting

    International Nuclear Information System (INIS)

    Sherr, T.S.; Smith, G.D.; Wirfs, L.F.

    1978-01-01

    This paper presents a short description of the safeguards responsibilities and activities of the U.S. Nuclear Regulatory Commission (NRC), the NRC regulatory requirements for safeguards in the area of material control and accounting (MCandA), and the current NRC efforts which may result in significant changes in the current U.S. safeguards system. The preliminary results of NRC staff and contractor MCandA activities are discussed, as well as the recommendations of a recent NRC task force on MCandA. 9 refs

  3. Controlling user access to electronic resources without password

    Science.gov (United States)

    Smith, Fred Hewitt

    2017-08-22

    Described herein are devices and techniques for remotely controlling user access to a restricted computer resource. The process includes obtaining an image from a communication device of a user. An individual and a landmark are identified within the image. Determinations are made that the individual is the user and that the landmark is a predetermined landmark. Access to a restricted computing resource is granted based on the determining that the individual is the user and that the landmark is the predetermined landmark. Other embodiments are disclosed.

  4. Bioinspired Materials for Controlling Ice Nucleation, Growth, and Recrystallization.

    Science.gov (United States)

    He, Zhiyuan; Liu, Kai; Wang, Jianjun

    2018-05-15

    Ice formation, mainly consisting of ice nucleation, ice growth, and ice recrystallization, is ubiquitous and crucial in wide-ranging fields from cryobiology to atmospheric physics. Despite active research for more than a century, the mechanism of ice formation is still far from satisfactory. Meanwhile, nature has unique ways of controlling ice formation and can provide resourceful avenues to unravel the mechanism of ice formation. For instance, antifreeze proteins (AFPs) protect living organisms from freezing damage via controlling ice formation, for example, tuning ice nucleation, shaping ice crystals, and inhibiting ice growth and recrystallization. In addition, AFP mimics can have applications in cryopreservation of cells, tissues, and organs, food storage, and anti-icing materials. Therefore, continuous efforts have been made to understand the mechanism of AFPs and design AFP inspired materials. In this Account, we first review our recent research progress in understanding the mechanism of AFPs in controlling ice formation. A Janus effect of AFPs on ice nucleation was discovered, which was achieved via selectively tethering the ice-binding face (IBF) or the non-ice-binding face (NIBF) of AFPs to solid surfaces and investigating specifically the effect of the other face on ice nucleation. Through molecular dynamics (MD) simulation analysis, we observed ordered hexagonal ice-like water structure atop the IBF and disordered water structure atop the NIBF. Therefore, we conclude that the interfacial water plays a critical role in controlling ice formation. Next, we discuss the design and fabrication of AFP mimics with capabilities in tuning ice nucleation and controlling ice shape and growth, as well as inhibiting ice recrystallization. For example, we tuned ice nucleation via modifying solid surfaces with supercharged unfolded polypeptides (SUPs) and polyelectrolyte brushes (PBs) with different counterions. We found graphene oxide (GO) and oxidized quasi

  5. Supervisory control of drilling of composite materials

    Science.gov (United States)

    Ozaki, Motoyoshi

    Composite materials have attractive features, such as high ratios of strength-to-weight and stiffness-to-weight. However, they are easily damaged when they are machined. A typical damage is delamination, which can occur when fiber reinforced composite laminates are drilled. The objective of this research is to study the drilling processes of carbon fiber reinforced laminates, and to develop and test a supervisory control strategy for their delamination-free drilling. Characterization of thrust force and torque is achieved through constant feedrate drilling experiments. The average values of thrust force and torque during the full engagement of the drill are utilized to obtain the Shaw's equations' parameters. The thrust force profile just before exit is given special attention. The Hocheng-Dharan equations, which give conservative values of delamination at the entrance and at the exit, are modified to express the influence of one lamina thickness explicitly. They are utilized not only for the characterization of thrust force but also for the determination of the thrust force reference for force control. In the design of the controllers of thrust force and torque, both thrust force and torque are assumed to be proportional to FPHR (Feed Per Half Revolution). A discrete-time dynamic model is established for the case when the time interval for a half revolution of the drill is divided by the sampling time, and the model is extended to the case of general spindle speeds. PI controllers are designed for the dynamic models of thrust force and torque. Root-locus techniques are used in the analysis. The phases of the drilling process are introduced and the control strategy at each phase is explained. The supervisory controller chooses not only the best control strategy for each phase, but also the reference value and the controller gain that are suitable at each drill position. Drilling experiments are conducted to show the usefulness of the concepts introduced in this

  6. Material control for a reprocessing plant

    International Nuclear Information System (INIS)

    Rundquist, D.; Bray, G.; Donelson, S.; Glancy, J.; Gozani, T.; Harris, L.; McNamera, R.; Pence, D.; Ringham, M.

    1976-01-01

    Adequate control of special nuclear material (SNM) implies a basic knowledge of the quantities of SNM processed through or contained within a fuels processing facility with sufficient accuracy that diversion of the SNM for deleterious purposes can be detected in a timely manner. This report to the Lawrence Livermore Laboratory (LLL) describes the primary process streams containing plutonium that are handled routinely within a spent fuel reprocessing plant and conversion facility. As an aid in implementing the objectives of the accountability system in a realistic situation, the Allied General Nuclear Services (AGNS) reprocessing plant now under construction near Barnwell, South Carolina, was chosen as the study model. The AGNS plant processes are discussed in detail emphasizing those portions of the process that contain significant quantities of plutonium. The unit processes within the separations plant, nitrate storage, plutonium product facility and the analytical laboratory are described with regard to the SNM control system currently planned for use in the facilities. A general discussion of laboratory techniques, nondestructive assay and process instrumentation for plutonium process and product material from a reprocessing plant is included. A comprehensive discussion is given of holdup measurements in plutonium recycle facilities. A brief preliminary overview is presented of alternative processing strategies for LWR fuel. An extensive review and summary of modeling efforts for liquid-liquid extraction cycles is included. A comprehensive bibliography of previous modeling efforts is covered

  7. Determinants of human resource investment in internal controls

    Directory of Open Access Journals (Sweden)

    Jong-Hag Choi

    2013-09-01

    Full Text Available Using the unique reporting environment in Korea, this study investigates the determinants of human resource investment in internal controls for 1352 listed firms disclosing the number of personnel who are in charge of internal control-related tasks (IC personnel from 2005 to 2008. We find that the number of IC personnel within a firm and several key departments increase with firm size, number of employees, complexity and for Chaebols, and decrease in rapidly growing firms. Additional analysis reveals that the factors influencing internal control systems have an accentuated effect on firms with relatively larger firm size.

  8. Asynchronous control of Distributed Energy Resources using behaviour descriptions

    DEFF Research Database (Denmark)

    Kullmann, Daniel; Gehrke, Oliver; Bindner, Henrik

    2012-01-01

    The activation of power system services from small DER is a key to building electrical power systems with a high penetrations of renewable generation. Reliable, real-time and low-cost communication to a large number of DER units is required for controlling these resources, but difficult to achiev....... This paper presents an alternative to traditional closed-loop control which has the potential to relax the real-time requirements on the communication link between supervisory controller and DER unit. Examples are given, and experimental results are provided as a proof-of-concept....

  9. Program-oriented approach to resource saving issues in construction materials industry

    Directory of Open Access Journals (Sweden)

    Novikova Galina

    2017-01-01

    Full Text Available The construction as a sector of the economy is one of the largest consumers of energy resources, and the building materials industry is today one of the most energy-intensive construction industry. At the enterprises of the building materials industry the different approaches and methods are used to solve resource and energy problems. Energy saving is considered not as an complex approach in the enterprise activity, but as activity for the implementation of specific energy-saving projects, which have limitations in time and in resources. The authors suggest to use a softwareoriented approach to solving the problems of resource and energy saving. For practical application of program-oriented approach we offer to use a structuring method of the decision-making, not previously used to solve problems of resource and energy saving.

  10. Academic Entrepreneurship and Exchange of Scientific Resources: Material Transfer in Life and Materials Sciences in Japanese Universities

    Science.gov (United States)

    Shibayama, Sotaro; Walsh, John P.; Baba, Yasunori

    2012-01-01

    This study uses a sample of Japanese university scientists in life and materials sciences to examine how academic entrepreneurship has affected the norms and behaviors of academic scientists regarding sharing scientific resources. Results indicate that high levels of academic entrepreneurship in a scientific field are associated with less reliance…

  11. Infection control resources in New York State hospitals, 2007.

    Science.gov (United States)

    Stricof, Rachel L; Schabses, Karolina A; Tserenpuntsag, Boldtsetseg

    2008-12-01

    In July 2005, New York State legislation requiring the mandatory reporting of specific hospital-associated infections (HAIs) was passed by the legislature and signed by the governor. In an effort to measure the impact of this legislation on infection control resources, the New York State Department of Health (NYSDOH) conducted a baseline survey in March 2007. This report presents an overview of the methods and results of this survey. An electronic survey of infection control resources and responsibilities was conducted by the NYSDOH on their secure data network. The survey contained questions regarding the number and percent time for infection prevention and control professional (ICP) and hospital epidemiologist (HE) staff members, ICP/HE educational background and certification, infection control program support services, activities and responsibilities of infection prevention and control program staff, and estimates of time dedicated to various activities, including surveillance. Practitioners in 222 of 224 acute care hospitals (99%) responded. The average number of ICPs per facility depended on the average daily census of acute care beds and ranged from a mean of 0.64 full-time equivalent (FTE) ICP in facilities with an average daily census of or = 900 beds. Averaging the ICP resources over the health care settings for which they were responsible revealed that the "average full-time ICP" was responsible for 151 acute care facility beds, 1.3 intensive care units (ICUs) (average, 16 ICU beds), 21 long-term care facility beds, 0.6 dialysis centers, 0.5 ambulatory surgery centers, 4.8 ambulatory/outpatient clinics, and 1.1 private practice offices. The ICPs reported that 45% of their time is dedicated to surveillance. Other activities for which ICPs reported at least partial responsibility include staff education, quality assurance, occupational health, emergency preparedness, construction, central supply/processing, and risk management. This survey was designed to

  12. Reuse and recovery of raw materials: Towards the achievement of a resource-efficient society

    International Nuclear Information System (INIS)

    Brunori, Claudia; Cutaia, Laura; Norabito, Roberto

    2015-01-01

    Resource efficiency plays a key role in the transition from a linear to a circular economy system. During the last few decades a rapid growth in the number of materials used across complex products has occurred. Given the high economic importance of critical raw materials combined with relatively high supply risk, securing reliable and undistorted access of certain raw materials is of growing concern across the globe. Development of eco-innovative approaches devoted to closing the loop of resources is strongly needed, allowing the connection between production cycles and their territory.

  13. Phase change material for temperature control and material storage

    Science.gov (United States)

    Wessling, Jr., Francis C. (Inventor); Blackwood, James M. (Inventor)

    2011-01-01

    A phase change material comprising a mixture of water and deuterium oxide is described, wherein the mole fraction of deuterium oxide is selected so that the mixture has a selected phase change temperature within a range between 0.degree. C. and 4.degree. C. The mixture is placed in a container and used for passive storage and transport of biomaterials and other temperature sensitive materials. Gels, nucleating agents, freezing point depression materials and colorants may be added to enhance the characteristics of the mixture.

  14. Report of the Material Control and Material Accounting Task Force: appendices

    International Nuclear Information System (INIS)

    1978-03-01

    Five appendixes are presented. The first comprises a chronological development of material control and material accounting requirements. The second gives a description of current NRC control and material accounting requirements, practices, and capabilities. In the third a description is given of NRC's research and technical assistance program concerning the measurement and measurement quality control elements of licensee material control and material accounting systems. The fourth covers some special considerations related to inventory differences and their analysis. In the fifth a detailed description is presented of the evaluation methodologies used in development of improved material control and material accounting systems

  15. Information Modeling for Direct Control of Distributed Energy Resources

    DEFF Research Database (Denmark)

    Biegel, Benjamin; Andersen, Palle; Stoustrup, Jakob

    2013-01-01

    We present an architecture for an unbundled liberalized electricity market system where a virtual power plant (VPP) is able to control a number of distributed energy resources (DERs) directly through a two-way communication link. The aggregator who operates the VPP utilizes the accumulated...... a desired accumulated response. In this paper, we design such an information model based on the markets that the aggregator participates in and based on the flexibility characteristics of the remote controlled DERs. The information model is constructed in a modular manner making the interface suitable...

  16. Revisiting Rebound Effects from Material Resource Use. Indications for Germany Considering Social Heterogeneity

    Directory of Open Access Journals (Sweden)

    Johannes Buhl

    2014-02-01

    Full Text Available In contrast to the original investigation by William Stanley Jevons, compensations of energy savings due to improved energy efficiency are mostly analyzed by providing energy consumption or greenhouse gas emissions. In support of a sustainable resource management, this paper analyzes so-called rebound effects based on resource use. Material flows and associated expenditures by households allow for calculating resource intensities and marginal propensities to consume. Marginal propensities to consume are estimated from data of the German Socio-Economic Panel (SOEP in order to account for indirect rebound effects for food, housing and mobility. Resource intensities are estimated in terms of total material requirements per household final consumption expenditures along the Classification of Individual Consumption according to Purpose (COICOP. Eventually, rebound effects are indicated on the basis of published saving scenarios in resource and energy demand for Germany. In sum, compensations due to rebound effects are lowest for food while the highest compensations are induced for mobility. This is foremost the result of a relatively high resource intensity of food and a relatively low resource intensity in mobility. Findings are provided by giving various propensity scenarios in order to cope with income differences in Germany. The author concludes that policies on resource conservation need to reconsider rebound effects under the aspect of social heterogeneity.

  17. The ideal usage of sustainable materials and local resources of the interior space design in Jordan

    Energy Technology Data Exchange (ETDEWEB)

    Fahmi Hussien, Mayyadah [Department of Interior Design, Faculty of Architect and Art, Petra University (Jordan)], Email: Mayada19732004@yahoo.com

    2011-07-01

    A large amount of waste is generated by buildings over their life cycle, from construction and operation to destruction. Sustainable design principles and recycling programs in buildings can help moderate this waste. The simplest way is directly through the materials used in the building's construction. The materials and resources used should focus on the health and productivity consequences for the building's inhabitants and its environmental, social and economic impacts. This aim of this study is to make certain recommendations with respect to the use of sustainable building materials and resources in indoor spaces in Jordan. A general overview of collection and storage of recyclable materials, waste management, material reuse, and green and rapidly renewable materials is given. Sustainable material usage in the elements of interior design in Jordan is also discussed in two case studies. A set of indicators is proposed which identify the ideal sustainable materials and resources for use in interior design in Jordan to provide a healthy living environment.

  18. Eight Tons of Material Footprint—Suggestion for a Resource Cap for Household Consumption in Finland

    Directory of Open Access Journals (Sweden)

    Michael Lettenmeier

    2014-07-01

    Full Text Available The paper suggests a sustainable material footprint of eight tons, per person, in a year as a resource cap target for household consumption in Finland. This means an 80% (factor 5 reduction from the present Finnish average. The material footprint is used as a synonym to the Total Material Requirement (TMR calculated for products and activities. The paper suggests how to allocate the sustainable material footprint to different consumption components on the basis of earlier household studies, as well as other studies, on the material intensity of products, services, and infrastructures. It analyzes requirements, opportunities, and challenges for future developments in technology and lifestyle, also taking into account that future lifestyles are supposed to show a high degree of diversity. The targets and approaches are discussed for the consumption components of nutrition, housing, household goods, mobility, leisure activities, and other purposes. The paper states that a sustainable level of natural resource use by households is achievable and it can be roughly allocated to different consumption components in order to illustrate the need for a change in lifestyles. While the absolute material footprint of all the consumption components will have to decrease, the relative share of nutrition, the most basic human need, in the total material footprint is expected to rise, whereas much smaller shares than at present are proposed for housing and especially mobility. For reducing material resource use to the sustainable level suggested, both social innovations, and technological developments are required.

  19. The Role of Material/Energy Resources and Dematerialisation in Economic Growth Theories

    OpenAIRE

    Ayres, Robert U.; van den Bergh, Jeroen C.J.M.

    2000-01-01

    The nature of energy and material resources in an endogenous growththeory framework isclarified. This involves three modifications of the conventionaltheory. Firstly, multiple feedbackmechanisms or “growth engines” are identified. Secondly, a productionfunction distinguishesbetween resource use, technical efficiency and value creation.Thirdly, the impact of the cost ofproduction through demand on growth is accounted for. A formal modelis analytically solvedunder a condition of a constant grow...

  20. Material resources, energy, and nutrient recovery from waste: are waste refineries the solution for the future?

    DEFF Research Database (Denmark)

    Tonini, Davide; Martinez-Sanchez, Veronica; Astrup, Thomas Fruergaard

    2013-01-01

    Waste refineries focusing on multiple outputs of material resources, energy carriers, and nutrients may potentially provide more sustainable utilization of waste resources than traditional waste technologies. This consequential life cycle assessment (LCA) evaluated the environmental performance....... Overall, the waste refinery provided global warming (GW) savings comparable with efficient incineration, MBT, and bioreactor landfilling technologies. The main environmental benefits from waste refining were a potential for improved phosphorus recovery (about 85%) and increased electricity production (by...

  1. 78 FR 67225 - Amendments to Material Control and Accounting Regulations

    Science.gov (United States)

    2013-11-08

    ... Amendments to Material Control and Accounting Regulations AGENCY: Nuclear Regulatory Commission. ACTION... for material control and accounting (MC&A) of special nuclear material (SNM). The goal of this... for control and accounting of SNM that is held by a licensee. The MC&A regulations ensure that the...

  2. 10 CFR 74.51 - Nuclear material control and accounting for strategic special nuclear material.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Nuclear material control and accounting for strategic special nuclear material. 74.51 Section 74.51 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) MATERIAL CONTROL AND ACCOUNTING OF SPECIAL NUCLEAR MATERIAL Formula Quantities of Strategic Special Nuclear...

  3. Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials. Supplement 34, 1988.

    Science.gov (United States)

    Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

    The Environmental Quality Instructional Resources Center in Columbus, Ohio, acquires, reviews, indexes, and announces both print (books, modules, units, etc.) and non-print (films, slides, video tapes, etc.) materials related to water quality and water resources education and instruction. In addition some materials related to pesticides, hazardous…

  4. Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials. Supplement 32, 1987.

    Science.gov (United States)

    Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

    The Environmental Quality Instructional Resources Center in Columbus, Ohio, acquires, reviews, indexes, and announces both print (books, modules, units, etc.) and non-print (films, slides, video tapes, etc.) materials related to water quality and water resources education and instruction. In addition some materials related to pesticides, hazardous…

  5. The global resource balance table, an integrated table of energy, materials and the environment

    International Nuclear Information System (INIS)

    Tsuchiya, Haruki

    2013-01-01

    This paper introduces the Global Resource Balance Table (GRBT), which is an extension of the energy balance tables that expresses the relationships between energy, materials and the environment. The material division of the GRBT includes steel, cement, paper, wood and grain. In contrast, the environmental division of the GRBT includes oxygen, CO 2 and methane. The transaction division rows in the GRBT include production, conversion, end use and stock. Each cell of the GRBT contains the quantities of the respective resources that were generated or consumed. The relationships between the cells were constructed from the laws of conservation of the materials and energy. We constructed a GRBT for 2007 and discussed the increasing air temperature due to waste heat and the CO 2 equivalent from human breathing. The GRBT is a comprehensive integrated table that represents the resources that are consumed by human activities and is useful for energy and environmental studies. - Highlights: • We extended energy balance table and introduced Global Resource Balance Table. • It shows relationships between energy, materials and the environment. • The material division includes steel, cement, paper, wood and grain. • The environmental division includes oxygen, CO 2 and methane. • We discussed on waste heat and CO 2 emission by human breathing

  6. Raw material monitoring assists companies. German Mineral Resources Agency at BGR provides information on global developments in resource markets

    International Nuclear Information System (INIS)

    2016-01-01

    Germany is dependent on imports for its metalliferous natural resources. Although prices have been declining significantly in recent months, numerous raw materials such as platinum, cobalt and rare earth elements continue to be exposed to price and supply risks. To ensure that German industry can respond better to this situation in their procurement activities, the German Mineral Resources Agency (DERA) at BGR has developed a raw material monitoring system on behalf of the German government. DERA experts have con figured a screening method for the early identification of possible procurement risks. This is the platform which enables German companies to gain the specific advice they require. All of the most important information on this issue is bundled within DERA 's internet portal (www.deutsche-rohstoffagentur.de). BGR also provides its expertise in other important fields with great societal relevance. BGR has been advising the national commission on ''Storage of High-level Radioactive Waste'' since 2014. Due to their comprehensive research activities in the field of radioactive waste disposal, BGR scientists are important technical experts to which the commission can turn to for geological information and advice.

  7. Cancer in Angola, resources and strategy for its control.

    Science.gov (United States)

    Lopes, Lygia Vieira; Conceição, Ana Vaz; Oliveira, João Blasques; Tavares, António; Domingos, Clarinha; Santos, Lucio Lara

    2012-01-01

    Cancer is an increasingly important health problem in Africa. The number of cancer cases in this region could double, ranging between 700 000 and 1 600 000 new cases in 2030. The mortality rate is higher than 80% and is explained, mainly, by a lack of early detection, diagnostics and treatment resources. In Angola, about 7,000 patients die of cancer every year. Data were derived from open-ended interviews conducted in 2010-11 with health authorities, clinicians, nurses and Administration of Hospitals. According Angola epidemiological data, results of interviews and international published advocacy for cancer control we develop a potential strategy for its control. The objectives are to identify existing resources for cancer control and describe the needs thereto, in order to establish an oncological program to guide the development of Angola cancer control strategies. Malaria remains the leading cause of illness and death in Angola, and other communicable diseases remain a public health problem. However, 9 000 new cases of cancer are diagnosed each year.The most common types of cancer are: cancer of the cervix, breast, prostate, esophagus, stomach and head and neck, as well as cancers with infectious origin, such as Kaposi's sarcoma and liver and bladder cancer. The foundation for developing national cancer control strategies includes: oncological data; investment and training; identifying and removing barriers; guidance and protection of the patient. Angolan National Cancer Centre, Sagrada Esperança Clinic and Girassol Clinic are now developing a cancer program. Improving the economic situation of Angola creates conditions for an increase in life expectancy which in itself is associated with an increased risk of oncological diseases. On the other hand, infectious diseases, associated with the risk of malignant tumors, are endemic. Thus, an increase in patients with malignant disease is expected. A plan is therefore necessary to organize the response to this old

  8. Material control system simulator user's manual

    Energy Technology Data Exchange (ETDEWEB)

    Hollstien, R.B.

    1978-01-24

    This report describes the use of a Material Control System Simulator (MCSS) program for determination of material accounting uncertainty and system response to particular adversary action sequences that constitute plausible material diversion attempts. The program is intended for use in situations where randomness, uncertainty, or interaction of adversary actions and material control system components make it difficult to assess safeguards effectiveness against particular material diversion attempts.

  9. Realization of New and Enhanced Materials Properties Through Nanostructural Control

    National Research Council Canada - National Science Library

    Dalton, Larry

    2006-01-01

    ... transmitter/receiver systems. During this period of time, the Dalton research group served as the national resource for state-of-the-art electro-optic materials providing materials to DoD laboratories, DoE labs, NIST researchers...

  10. Realization of New and Enhanced Materials Properties through Nanostructural Control

    National Research Council Canada - National Science Library

    Lee, Charles

    2003-01-01

    ...) transmitter/receiver systems. During this period of time, the Dalton research group served as the national resource for state-of-the-art electro-optic materials providing materials to DoD laboratories, DoE labs, NIST researchers...

  11. Decision making model for the recovery of useful material resources from wastes

    International Nuclear Information System (INIS)

    Rising, K.H.; Jensen, G.A.; FitzPatrick, V.F.

    1982-06-01

    In the United States, many of the material resources necessary for energy production are imported. Strategic stockpiling of these resources has been a well-known method for reducing the economic and productivity impact of supply interruption in case of emergency. Another viable option is the recovery of valuable materials and recycle of useful products from wastes generated in energy production and industrial processing. The technical feasibility for recovery and recycle, including decontamination of nuclear-related materials, has been proven and demonstrated. The economic feasibility would depend on both the resale and strategic values of the material, the saving from reusing rather than disposing of the material, the reclamation cost, and other factors that may influence the incentive for recovery and recycle. The purpose of the work presented in this paper is to develop a model to identify the economic and other incentives for the reclamation of useful material resources. Using available data to quantify factors such as strategic and resale values, reclamation cost and disposal cost saving, this model calculates the incentive value consisting of the above factors and selects the appropriate reclamation option. Because this model is empirical, there are limitations to its application. However, within the boundary where the model has been tested, it can be a useful tool for the decision maker to evaluate the economic feasibility of reclamation

  12. Schooling the Mean Girl: A Critical Discourse Analysis of Teacher Resource Materials

    Science.gov (United States)

    Bethune, Jennifer; Gonick, Marnina

    2017-01-01

    This paper is a critical discourse analysis of teacher resource materials about girl bullying. The "mean girl" phenomenon has been widely taken up as one of the current key narratives about schools and school girls. This paper argues for the importance of understanding the origins of this discourse within behavioural psychology, which…

  13. Ecologia: Spanish Ecology Packet Resource Units and Materials for Intermediate and Advanced Spanish Classes.

    Science.gov (United States)

    Bell, Mozelle Sawyer; Arribas, E. Jaime

    This Spanish ecology packet contains resource units and materials for intermediate and advanced Spanish classes. It is designed to be used for individual and small-group instruction in the senior high school to supplement the Spanish language curriculum. Included are articles, pictures, and cartoons from Spanish-language newspapers and magazines…

  14. Determining the Supply of Material Resources for High-Rise Construction: Scenario Approach

    Science.gov (United States)

    Minnullina, Anna; Vasiliev, Vladimir

    2018-03-01

    This article presents a multi-criteria approach to determining the supply of material resources for high-rise construction under certain and uncertain conditions, which enables integrating a number of existing models into a fairly compact generalised economic and mathematical model developed for two extreme scenarios.

  15. Material Resources For Eye Care Delivery In Urban South-Eastern ...

    African Journals Online (AJOL)

    Objectives: To determine the availability and distribution of material resources for primary and secondary level eye care delivery in Enugu-North Local Government Area (LGA) of Enugu State. Methods: A survey of Public (State and Local Government administered) health care facilities in Enugu North LGA was done.

  16. 77 FR 71842 - Exemption of Material for Proposed Disposal Procedures at the US Ecology Idaho Resource...

    Science.gov (United States)

    2012-12-04

    ... Proposed Disposal Procedures at the US Ecology Idaho Resource Conservation and Recovery Act Subtitle C... water solidified with clay containing low-activity radioactive material, at the US Ecology Idaho (USEI... and 10 CFR 70.17 Exemption of Humboldt Bay Power Plant Waste For Disposal at US Ecology, Inc'' [ADAMS...

  17. Information systems for the materials management department: stand-alone and enterprise resource planning systems.

    Science.gov (United States)

    2005-03-01

    Materials management information systems (MMISs) incorporate information tools that hospitals can use to automate certain business processes, increase staff compliance with these processes, and identify opportunities for cost savings. Recently, there has been a push by hospital administration to purchase enterprise resource planning (ERP) systems, information systems that promise to integrate many more facets of healthcare business. We offer this article to help materials managers, administrators, and others involved with information system selection understand the changes that have taken place in materials management information systems, decide whether they need a new system and, if so, whether a stand-alone MMIS or an ERP system will be the best choice.

  18. Climate control systems using pozzolan materials

    KAUST Repository

    Almadhoun, Mahmoud Nassar Mahmoud

    2016-01-01

    A system and method for conditioning air is provided that optimizes the use of sustainable and locally sourced materials with agrarian, residential, and industrial applications. The system can be formed with a porous siliceous, or siliceous

  19. Rural providers’ access to online resources: a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Jonathan D. Eldredge

    2016-01-01

    Full Text Available Objective: The research determined the usage and satisfaction levels with one of two point-of-care (PoC resources among health care providers in a rural state. Methods: In this randomized controlled trial, twenty-eight health care providers in rural areas were stratified by occupation and region, then randomized into either the DynaMed or the AccessMedicine study arm. Study participants were physicians, physician assistants, and nurses. A pre- and post-study survey measured participants’ attitudes toward different information resources and their information-seeking activities. Medical student investigators provided training and technical support for participants. Data analyses consisted of analysis of variance (ANOVA, paired t tests, and Cohen’s d statistic to compare pre- and post-study effects sizes. Results: Participants in both the DynaMed and the AccessMedicine arms of the study reported increased satisfaction with their respective PoC resource, as expected. Participants in both arms also reported that they saved time in finding needed information. At baseline, both arms reported too little information available, which increased to ‘‘about right amounts of information’’ at the completion of the study. DynaMed users reported a Cohen’s d increase of þ1.50 compared to AccessMedicine users’ reported use of 0.82. DynaMed users reported d2 satisfaction increases of 9.48 versus AccessMedicine satisfaction increases of 0.59 using a Cohen’s d. Conclusion: Participants in the DynaMed arm of the study used this clinically oriented PoC more heavily than the users of the textbook-based AccessMedicine. In terms of user satisfaction, DynaMed users reported higher levels of satisfaction than the users of AccessMedicine.

  20. Rural providers' access to online resources: a randomized controlled trial

    Science.gov (United States)

    Hall, Laura J.; McElfresh, Karen R.; Warner, Teddy D.; Stromberg, Tiffany L.; Trost, Jaren; Jelinek, Devin A.

    2016-01-01

    Objective The research determined the usage and satisfaction levels with one of two point-of-care (PoC) resources among health care providers in a rural state. Methods In this randomized controlled trial, twenty-eight health care providers in rural areas were stratified by occupation and region, then randomized into either the DynaMed or the AccessMedicine study arm. Study participants were physicians, physician assistants, and nurses. A pre- and post-study survey measured participants' attitudes toward different information resources and their information-seeking activities. Medical student investigators provided training and technical support for participants. Data analyses consisted of analysis of variance (ANOVA), paired t tests, and Cohen's d statistic to compare pre- and post-study effects sizes. Results Participants in both the DynaMed and the AccessMedicine arms of the study reported increased satisfaction with their respective PoC resource, as expected. Participants in both arms also reported that they saved time in finding needed information. At baseline, both arms reported too little information available, which increased to “about right amounts of information” at the completion of the study. DynaMed users reported a Cohen's d increase of +1.50 compared to AccessMedicine users' reported use of 0.82. DynaMed users reported d2 satisfaction increases of 9.48 versus AccessMedicine satisfaction increases of 0.59 using a Cohen's d. Conclusion Participants in the DynaMed arm of the study used this clinically oriented PoC more heavily than the users of the textbook-based AccessMedicine. In terms of user satisfaction, DynaMed users reported higher levels of satisfaction than the users of AccessMedicine. PMID:26807050

  1. Material control test and evaluation system at the ICPP

    International Nuclear Information System (INIS)

    Johnson, C.E.

    1979-01-01

    The US DOE is evaluating process monitoring as part of a total nuclear material safeguards system. A monitoring system is being installed at the Idaho Chemical Processing Plant to test and evaluate material control and surveillance concepts in an operating nuclear fuel reprocessing plant. Process monitoring for nuclear material control complements conventional safeguards accountability and physical protection to assure adherence to approved safeguards procedures and verify containment of nuclear materials within the processing plant

  2. Exergy Analysis of the Supply of Energy and Material Resources in the Swedish Society

    Directory of Open Access Journals (Sweden)

    Mei Gong

    2016-09-01

    Full Text Available Exergy is applied to the Swedish energy supply system for the period 1970–2013. Exergy flow diagrams for the systems of electricity and district heating as well as for the total supply system of energy and material resources for 2012 are presented. The share of renewable use has increased in both electricity and district heat production. The resource use is discussed in four sectors: residential and service, transportation, industry and agriculture. The resource use is also analyzed with respect to exergy efficiency and renewable share. The total exergy input of energy and material resources amounts to about 2700 PJ of which about 530 PJ was used for final consumption in 2012. The results are also compared with similar studies. Even though the share of renewable resource use has increased from 42% in 1980 to 47% in 2012, poor efficiency is still occurring in transportation, space heating, and food production. A strong dependence on fossil and nuclear fuels also implies a serious lack of sustainability. A more exergy efficient technology and a higher renewable energy share are needed in order to become a more sustainable society.

  3. Report of the Material Control and Material Accounting Task Force: the role of material control and material accounting in the safeguards program

    International Nuclear Information System (INIS)

    1978-03-01

    Results are presented of NRC Task Force investigations to identify the functions of a safeguards program in relation to the NRC safeguards objective, define the role and objectives of material control and material accounting systems within that program, develop goals for material control and material accounting based on those roles and objectives, assess current material control and material accounting requirements and performance levels in the light of the goals, and recommend future actions needed to attain the proposed goals. It was found that the major contribution of material accounting to the safeguards program is in support of the assurance function. It also can make secondary contributions to the prevention and response functions. In the important area of loss detection, a response measure, it is felt that limitations inherent in material accounting for some fuel cycle operations limit its ability to operate as a primary detection system to detect a five formula kilogram loss with high assurance (defined by the Task Force as a probability of detection of 90 percent or more) and that, in those cases, material accounting can act only in a backup role. Physical security and material control must make the primary contributions to the prevention and detection of theft, so that safeguards do not rely primarily for detection capabilities on material accounting. There are several areas of accounting that require more emphasis than is offered by the current regulatory base. These areas include: timely shipper-receiver difference analysis and reconciliation; a demand physical inventory capability; improved loss localization;discard measurement verification; timely recovery of scrap; improved measurement and record systems; and limits on cumulative inventory differences and shipper-receiver differences. An increased NRC capability for monitoring and analyzing licensee accounting data and more timely and detailed submittals of data to NRC by licensees are recommended

  4. Cultural Resource Investigations for the Resumption of Transient Testing of Nuclear Fuels and Material at the Idaho National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Pace, Brenda R. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Williams, Julie B. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2013-11-01

    The U. S. Department of Energy (DOE) has a need to test nuclear fuels under conditions that subject them to short bursts of intense, high-power radiation called ‘transient testing’ in order to gain important information necessary for licensing new nuclear fuels for use in U.S. nuclear power plants, for developing information to help improve current nuclear power plant performance and sustainability, for improving the affordability of new generation reactors, for developing recyclable nuclear fuels, and for developing fuels that inhibit any repurposing into nuclear weapons. To meet this mission need, DOE is considering alternatives for re-use and modification of existing nuclear reactor facilities to support a renewed transient testing program. One alternative under consideration involves restarting the Transient Reactor Test (TREAT) reactor located at the Materials and Fuels Complex (MFC) on the Idaho National Laboratory (INL) site in southeastern Idaho. This report summarizes cultural resource investigations conducted by the INL Cultural Resource Management Office in 2013 to support environmental review of activities associated with restarting the TREAT reactor at the INL. These investigations were completed in order to identify and assess the significance of cultural resources within areas of potential effect associated with the proposed action and determine if the TREAT alternative would affect significant cultural resources or historic properties that are eligible for nomination to the National Register of Historic Places. No archaeological resources were identified in the direct area of potential effects for the project, but four of the buildings proposed for modifications are evaluated as historic properties, potentially eligible for nomination to the National Register of Historic Places. This includes the TREAT reactor (building #), control building (building #), guardhouse (building #), and warehouse (building #). The proposed re-use of these historic

  5. The role of material/energy resources and dematerialisation in economic growth theories

    Energy Technology Data Exchange (ETDEWEB)

    Ayres, R.U. [Center for the Management of Environmental Resources INSEAD, Fountainebleau (France); Van den Bergh, J.C.J.M. [Department of Spatial Economics, Free University, Amsterdam (Netherlands)

    2000-06-01

    The nature of energy and material resources in an endogenous growth theory framework is clarified. This involves three modifications of the conventional theory. Firstly, multiple feedback mechanisms or 'growth engines' are identified. Secondly, a production function distinguishes between resource use, technical efficiency and value creation. Thirdly, the impact of the cost of production through demand on growth is accounted for. A formal model is analytically solved under a condition of a constant growth rate. Given model complexity, numerical experiments are performed as well, providing relevant insights to the academic and political debates on 'environmental Kuznets curves' and 'dematerialization'. 49 refs.

  6. Climate control systems using pozzolan materials

    KAUST Repository

    Almadhoun, Mahmoud Nassar Mahmoud

    2016-02-18

    A system and method for conditioning air is provided that optimizes the use of sustainable and locally sourced materials with agrarian, residential, and industrial applications. The system can be formed with a porous siliceous, or siliceous and aluminous material that is sufficiently porous, to allow conditioning fluid to flow there through. The material can also be formed into a structure that includes one or more passageways configured to allow air to be conditioned to also pass there through. The structure can be configured to cause the conditioning fluid passing through the porous portions of the structure to intersect and mix with air passing there through. The structure may include a plurality of passageways and intersections and may include a plurality of air inlets and outlets for air passage. The system may additionally include a means for storing, collecting, and driving conditioning fluid through the system and a means for collecting solar radiation to drive airflow and regenerate conditioning fluid.

  7. Integrating Space Flight Resource Management Skills into Technical Lessons for International Space Station Flight Controller Training

    Science.gov (United States)

    Baldwin, Evelyn

    2008-01-01

    The Johnson Space Center s (JSC) International Space Station (ISS) Space Flight Resource Management (SFRM) training program is designed to teach the team skills required to be an effective flight controller. It was adapted from the SFRM training given to Shuttle flight controllers to fit the needs of a "24 hours a day/365 days a year" flight controller. More recently, the length reduction of technical training flows for ISS flight controllers impacted the number of opportunities for fully integrated team scenario based training, where most SFRM training occurred. Thus, the ISS SFRM training program is evolving yet again, using a new approach of teaching and evaluating SFRM alongside of technical materials. Because there are very few models in other industries that have successfully tied team and technical skills together, challenges are arising. Despite this, the Mission Operations Directorate of NASA s JSC is committed to implementing this integrated training approach because of the anticipated benefits.

  8. Prescriptive concepts for advanced nuclear materials control and accountability systems

    International Nuclear Information System (INIS)

    Whitty, W.J.; Strittmatter, R.B.; Ford, W.; Tisinger, R.M.; Meyer, T.H.

    1987-06-01

    Networking- and distributed-processing hardware and software have the potential of greatly enhancing nuclear materials control and accountability (MC and A) systems, from both safeguards and process operations perspectives, while allowing timely integrated safeguards activities and enhanced computer security at reasonable cost. A hierarchical distributed system is proposed consisting of groups of terminal and instruments in plant production and support areas connected to microprocessors that are connected to either larger microprocessors or minicomputers. These micros and/or minis are connected to a main machine, which might be either a mainframe or a super minicomputer. Data acquisition, preliminary input data validation, and transaction processing occur at the lowest level. Transaction buffering, resource sharing, and selected data processing occur at the intermediate level. The host computer maintains overall control of the data base and provides routine safeguards and security reporting and special safeguards analyses. The research described outlines the distribution of MC and A system requirements in the hierarchical system and distributed processing applied to MC and A. Implications of integrated safeguards and computer security concepts for the distributed system design are discussed. 10 refs., 4 figs

  9. Material Resources and Population Health: Disadvantages in Health Care, Housing, and Food Among Adults Over 50 Years of Age

    Science.gov (United States)

    Soldo, Beth J.; Pagán, José A.; McCabe, John; deBlois, Madeleine; Field, Samuel H.; Asch, David A.; Cannuscio, Carolyn

    2009-01-01

    Objectives. We examined associations between material resources and late-life declines in health. Methods. We used logistic regression to estimate the odds of declines in self-rated health and incident walking limitations associated with material disadvantages in a prospective panel representative of US adults aged 51 years and older (N = 15 441). Results. Disadvantages in health care (odds ratio [OR] = 1.39; 95% confidence interval [CI] = 1.23, 1.58), food (OR = 1.69; 95% CI = 1.29, 2.22), and housing (OR = 1.20; 95% CI = 1.07, 1.35) were independently associated with declines in self-rated health, whereas only health care (OR = 1.43; 95% CI = 1.29, 1.58) and food (OR = 1.64; 95% CI = 1.31, 2.05) disadvantage predicted incident walking limitations. Participants experiencing multiple material disadvantages were particularly susceptible to worsening health and functional decline. These effects were sustained after we controlled for numerous covariates, including baseline health status and comorbidities. The relations between health declines and non-Hispanic Black race/ethnicity, poverty, marital status, and education were attenuated or eliminated after we controlled for material disadvantage. Conclusions. Material disadvantages, which are highly policy relevant, appear related to health in ways not captured by education and poverty. Policies to improve health should address a range of basic human needs, rather than health care alone. PMID:19890175

  10. FUNCTIONAL MODEL OF THE MATERIAL RESOURCES MANAGEMENT FOR PROJECTS OF THE CREATION OF NEW TECHNIQUES

    Directory of Open Access Journals (Sweden)

    S. Yu. Danshyna

    2016-01-01

    Full Text Available The article is devoted to problem of material management arising in the implementation of projects for the development and creation (modernization of the new techniques. The uniqueness of the projects, their limit on the cost and time does not allow the use of traditional approaches to resource management. Such projects are often implemented in the development of companies; where it is not possible to abandon the traditional operating methods of management. The aim of the article is a formalization of the process of material management of projects, a description of its information flows for integrate into the project management practices and for improve the efficiency of material management. For the systematization of information arising from the material resources management, invited the set-theoretic representation of the management process. According with the requirements of project management standards were described the sets and defined rules of their transformation. Specification of the set-theoretic representation helped to establish the area and limits of the modelling process. Further decomposition process became the basis of the functional model, constructed in accordance with the methodology IDEF 0. A graphical representation of the model allows you to visualize the process at different levels of detail. For specification of issues related to the organization and promotion of material flow, were developed functional models of sub-processes and were described the identified data-flows. For the harmonization of process and project approaches formulated conditions for evaluating the efficiency of material management. The developed models can be the basis for designing the structure of companies, for regulation of their project activities, as well as for establishing an information system of management resources of projects.

  11. Estimation of Resource Productivity and Efficiency: An Extended Evaluation of Sustainability Related to Material Flow

    Directory of Open Access Journals (Sweden)

    Pin-Chih Wang

    2014-09-01

    Full Text Available This study is intended to conduct an extended evaluation of sustainability based on the material flow analysis of resource productivity. We first present updated information on the material flow analysis (MFA database in Taiwan. Essential indicators are selected to quantify resource productivity associated with the economy-wide MFA of Taiwan. The study also applies the IPAT (impact-population-affluence-technology master equation to measure trends of material use efficiency in Taiwan and to compare them with those of other Asia-Pacific countries. An extended evaluation of efficiency, in comparison with selected economies by applying data envelopment analysis (DEA, is conducted accordingly. The Malmquist Productivity Index (MPI is thereby adopted to quantify the patterns and the associated changes of efficiency. Observations and summaries can be described as follows. Based on the MFA of the Taiwanese economy, the average growth rates of domestic material input (DMI; 2.83% and domestic material consumption (DMC; 2.13% in the past two decades were both less than that of gross domestic product (GDP; 4.95%. The decoupling of environmental pressures from economic growth can be observed. In terms of the decomposition analysis of the IPAT equation and in comparison with 38 other economies, the material use efficiency of Taiwan did not perform as well as its economic growth. The DEA comparisons of resource productivity show that Denmark, Germany, Luxembourg, Malta, Netherlands, United Kingdom and Japan performed the best in 2008. Since the MPI consists of technological change (frontier-shift or innovation and efficiency change (catch-up, the change in efficiency (catch-up of Taiwan has not been accomplished as expected in spite of the increase in its technological efficiency.

  12. Emotor control: computations underlying bodily resource allocation, emotions, and confidence.

    Science.gov (United States)

    Kepecs, Adam; Mensh, Brett D

    2015-12-01

    Emotional processes are central to behavior, yet their deeply subjective nature has been a challenge for neuroscientific study as well as for psychiatric diagnosis. Here we explore the relationships between subjective feelings and their underlying brain circuits from a computational perspective. We apply recent insights from systems neuroscience-approaching subjective behavior as the result of mental computations instantiated in the brain-to the study of emotions. We develop the hypothesis that emotions are the product of neural computations whose motor role is to reallocate bodily resources mostly gated by smooth muscles. This "emotor" control system is analagous to the more familiar motor control computations that coordinate skeletal muscle movements. To illustrate this framework, we review recent research on "confidence." Although familiar as a feeling, confidence is also an objective statistical quantity: an estimate of the probability that a hypothesis is correct. This model-based approach helped reveal the neural basis of decision confidence in mammals and provides a bridge to the subjective feeling of confidence in humans. These results have important implications for psychiatry, since disorders of confidence computations appear to contribute to a number of psychopathologies. More broadly, this computational approach to emotions resonates with the emerging view that psychiatric nosology may be best parameterized in terms of disorders of the cognitive computations underlying complex behavior.

  13. Work in the classrooms with European perspective: materials and resources for autonomus learning

    Directory of Open Access Journals (Sweden)

    Manuela RAPOSO RIVAS

    2011-04-01

    Full Text Available One of the key principles set forth in the bologna process is to focus teaching on students, by getting involved actively and independently in their learning process and in developing their skills. This requires the use of teaching and learning methods together with materials and resources to motivate and guide them. In this paper, we present three of them, from our experience in adapting the subject of «New Technologies Applied to education» to the ecTs system, which we have found useful for guiding and evaluating the learning process and promote the intended learning. These materials and resources are: «learning guides», the portfolio and the rubric.

  14. Popularity and Resource Control Goals as Predictors of Adolescent Indirect Aggression.

    Science.gov (United States)

    Dyches, Karmon D; Mayeux, Lara

    2015-01-01

    Resource Control Theory conceptualizes aggression as a behavior that allows access to, and control of, limited resources (P. H. Hawley, 1999 ). This study investigated the associations of adolescents' indirect aggression with their resource control goals, or goals related to controlling social resources such as dating opportunities and peer status, and with their levels of popularity and social intelligence. Participants were 109 seventh-graders (52% girls) who completed a resource control goals measure, the Tromsø Social Intelligence Scale, and peer nominations of popularity and indirect aggression. Results indicated positive associations between resource control goals and peer-nominated indirect aggression, with popularity further moderating these associations. These findings suggest that the resource control goals of adolescents can be a motivating force to engage in hurtful behaviors. They provide a context from which peer relations researchers can improve their understanding and prevention of adolescents' indirect aggression.

  15. Criticality Control Fissile of Materials. Proceedings of the Symposium on Criticality Control of Fissile Materials

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1966-05-15

    Criticality control comprises all the administrative and technical procedures which enable the storage and processing of fissile material to be carried out under conditions of nuclear safety. It is of particular importance in the safe design and operation of chemical and metallurgical plants processing fissile material, in the handling and storage of enriched fuel for reactors, and in transportation of fissile material. The growth of nuclear power, with its increasing use of fissile material and production of plutonium, is leading to an ever widening need for this discipline. This Symposium was held 4 Vulgar-Fraction-One-Half years after the only other international meeting on this topic, at which the first broad exchange of ideas and theories enabled a comparison to be drawn between the various ways in which the subject is handled in the different countries. That meeting showed that criticality safety was often achieved by procedures known to be ultra-safe, as there was a great lack of useful experimental data with which to check theoretical models. Since that time the quantities of material being processed have increased, and with the now urgent necessity of achieving economic, and hence commercially competitive, operation, the procedure of using arbitrary factors of safety is no longer adequate. Plant Managers now require good data on the basis of which they can choose a suitable factor of safety, and design a process to be safe under any foreseeable circumstances. The present Symposium showed the great increase in the amount of available experimental data and its importance in checking the now highly sophisticated computer calculations. There are many diagrams in these Proceedings with curves from which critical parameters for various configurations can be taken. The dearth of data for plutonium systems is causing some difficulty in plutonium processing plants, which are becoming commercially important. The excellent safety record of the atomic energy industry

  16. Evaluation of a fungal collection as certified reference material producer and as a biological resource center

    Directory of Open Access Journals (Sweden)

    Tatiana Forti

    2016-06-01

    Full Text Available Abstract Considering the absence of standards for culture collections and more specifically for biological resource centers in the world, in addition to the absence of certified biological material in Brazil, this study aimed to evaluate a Fungal Collection from Fiocruz, as a producer of certified reference material and as Biological Resource Center (BRC. For this evaluation, a checklist based on the requirements of ABNT ISO GUIA34:2012 correlated with the ABNT NBR ISO/IEC17025:2005, was designed and applied. Complementing the implementation of the checklist, an internal audit was performed. An evaluation of this Collection as a BRC was also conducted following the requirements of the NIT-DICLA-061, the Brazilian internal standard from Inmetro, based on ABNT NBR ISO/IEC 17025:2005, ABNT ISO GUIA 34:2012 and OECD Best Practice Guidelines for BRCs. This was the first time that the NIT DICLA-061 was applied in a culture collection during an internal audit. The assessments enabled the proposal for the adequacy of this Collection to assure the implementation of the management system for their future accreditation by Inmetro as a certified reference material producer as well as its future accreditation as a Biological Resource Center according to the NIT-DICLA-061.

  17. Evaluation of a fungal collection as certified reference material producer and as a biological resource center.

    Science.gov (United States)

    Forti, Tatiana; Souto, Aline da S S; do Nascimento, Carlos Roberto S; Nishikawa, Marilia M; Hubner, Marise T W; Sabagh, Fernanda P; Temporal, Rosane Maria; Rodrigues, Janaína M; da Silva, Manuela

    2016-01-01

    Considering the absence of standards for culture collections and more specifically for biological resource centers in the world, in addition to the absence of certified biological material in Brazil, this study aimed to evaluate a Fungal Collection from Fiocruz, as a producer of certified reference material and as Biological Resource Center (BRC). For this evaluation, a checklist based on the requirements of ABNT ISO GUIA34:2012 correlated with the ABNT NBR ISO/IEC17025:2005, was designed and applied. Complementing the implementation of the checklist, an internal audit was performed. An evaluation of this Collection as a BRC was also conducted following the requirements of the NIT-DICLA-061, the Brazilian internal standard from Inmetro, based on ABNT NBR ISO/IEC 17025:2005, ABNT ISO GUIA 34:2012 and OECD Best Practice Guidelines for BRCs. This was the first time that the NIT DICLA-061 was applied in a culture collection during an internal audit. The assessments enabled the proposal for the adequacy of this Collection to assure the implementation of the management system for their future accreditation by Inmetro as a certified reference material producer as well as its future accreditation as a Biological Resource Center according to the NIT-DICLA-061. Copyright © 2016 Sociedade Brasileira de Microbiologia. Published by Elsevier Editora Ltda. All rights reserved.

  18. Workshop on materials control and accounting system design

    International Nuclear Information System (INIS)

    Pillay, K.K.S.

    1989-01-01

    The chapter describes the workshop aimed at reinforcing, through participation in the design exercise, the concepts of nuclear materials control and accountability. Topics include: workshop format; key elements of a materials management and accounting (MC and A) system; and MC and A system design including safeguards organization and management, material access areas, key measurement points, nuclear materials measurements, physical inventory, material balance closings, and internal controls. Appended to this chapter is a detailed description of a facility that produces metallic plutonium and the safeguards requirements for this facility

  19. Management review of nuclear material control and accounting systems

    International Nuclear Information System (INIS)

    1975-06-01

    Section 70.58, ''Fundamental Nuclear Material Controls,'' of 10 CFR Part 70, ''Special Nuclear Materials,'' requires, in paragraph 70.58(c), that certain licensees authorized to possess more than one effective kilogram of special nuclear material establish a management system to provide for the development, revision, implementation, and enforcement of nuclear material control and accounting procedures. Such a system must provide for a review of the nuclear material control system at least every 12 months. This guide describes the purpose and scope, personnel qualifications, depth of detail, and procedures that are acceptable to the NRC staff for the management review of nuclear material control systems required under paragraph 70.58(c) of 10 CFR Part 70. (U.S.)

  20. Materials control and accounting (MC and A): the evolutionary pressures

    International Nuclear Information System (INIS)

    Shipley, J.P.

    1983-01-01

    Nuclear materials control and accounting systems are subject to pressures of both regulatory and institutional natures. This fact, coupled with the emergence of new technology, is causing evolutionary changes in materials control and accounting systems. These changes are the subject of this paper

  1. 76 FR 28193 - Amendments to Material Control and Accounting Regulations

    Science.gov (United States)

    2011-05-16

    ...] Amendments to Material Control and Accounting Regulations AGENCY: Nuclear Regulatory Commission. ACTION... amendments to the material control and accounting (MC&A) regulations. These regulations apply to NRC... ``accounting,'' and thus does not fully describe the accounting aspects that MC&A programs must include...

  2. Materials, methods and quality control, ch. 3

    International Nuclear Information System (INIS)

    Vader, H.L.

    1978-01-01

    A description of the chemical reagents, the 125 I-labelled angiotensin I, the antiserum and the standards is given. A modified measuring method with the New England Nuclear kit for angiotensin I radioimmunoassay is presented as well as the quality control data

  3. Selection of material balance areas and item control areas

    International Nuclear Information System (INIS)

    1975-04-01

    Section 70.58, ''Fundamental Nuclear Material Controls,'' of 10 CFR Part 70, ''Special Nuclear Material,'' requires certain licensees authorized to possess more than one effective kilogram of special nuclear material to establish Material Balance Areas (MBAs) or Item Control Areas (ICAs) for the physical and administrative control of nuclear materials. This section requires that: (1) each MBA be an identifiable physical area such that the quantity of nuclear material being moved into or out of the MBA is represented by a measured value; (2) the number of MBAs be sufficient to localize nuclear material losses or thefts and identify the mechanisms; (3) the custody of all nuclear material within an MBA or ICA be the responsibility of a single designated individual; and (4) ICAs be established according to the same criteria as MBAs except that control into and out of such areas would be by item identity and count for previously determined special nuclear material quantities, the validity of which must be ensured by tamper-safing unless the items are sealed sources. This guide describes bases acceptable to the NRC staff for the selection of material balance areas and item control areas. (U.S.)

  4. Material control and accountability procedures for a waste isolation repository

    International Nuclear Information System (INIS)

    Jenkins, J.D.; Allen, E.J.; Blakeman, E.D.

    1978-05-01

    The material control and accountability needs of a waste isolation repository are examined. Three levels of control are discussed: (1) item identification and control, (2) tamper indication, and (3) quantitative material assay. A summary of waste characteristics is presented and, based on these, plus a consideration of the accessibility of the various types of waste, material control by item identification and accountability (where the individual waste container is the basic unit) is recommended. Tamper indicating procedures are also recommended for the intermediate and low level waste categories

  5. Information resources and material selection in bonded restorations among Korean dentists.

    Science.gov (United States)

    Chang, Juhea; Kim, Hae-Young; Cho, Byeong Hoon; Lee, In Bog; Son, Ho Hyun

    2009-12-01

    To elucidate how dentists access knowledge sources when choosing adhesive agents for bonded restoration and whether these resources influenced the selection of materials. A national survey was carried out involving dentists in South Korea. The questionnaire included the status of the operator, clinical techniques, and materials. A total of 12,193 e-mails were distributed, 2632 were opened by recipients, and 840 responses were collected. For primary information resources in material selection, 55.8% (n = 469) of the responders mentioned continuing education. This selection criteria varied according to the working status of the clinician (p choice of bonding system was influenced by of the length of the career (p < 0.0001), and the preferred bonding systems differed according to the source of the information (p = 0.035). The popular bonding systems were not ranked according to the bonding strategy, but a preference was found for specific brands or manufacturers. To decrease the confusion of clinicians related to the selection of bonding materials, evidence-based guidelines need to be comprehensibly organized and efficiently approached in clinics.

  6. The system of nuclear material control of Kazakhstan

    International Nuclear Information System (INIS)

    Yeligbayeva, G.Zh.

    2001-01-01

    Full text: The State system for nuclear material control consists of three integral components. The efficiency of each is to guarantee the non-proliferation regime in Kazakhstan. The components are the following: accounting, export and import control and physical protection of nuclear materials. First, the implementation of the goals of accounting and control bring into force, by the organization of the system for accounting and measurement of nuclear materials to determine present quantity. Organizing the accounting for nuclear material at facilities will ensure the efficiency of accountancy and reporting information. This defines the effectiveness of the state system for the accounting for the Kazakhstan's nuclear materials. Currently, Kazakhstan's nuclear material is fully safeguarded in designated secure locations. Kazakhstan has a nuclear power plant, 4 research reactors and a fuel fabrication plant. The governmental information system for nuclear materials control consist of two level: Governmental level - KAEA collects reports from facilities and prepares the reports for International Atomic Energy Agency, keeping of supporting documents and other necessary information, a data base of export and import, a data base of nuclear material inventory. Facility level - registration and processing information from key measurement points, formation the facility's nuclear materials accounting database. All facilities have computerized systems. Currently, all facilities are safeguarded under IAEA safeguarding standards, through IAEA inspections. Annually, IAEA verifies all nuclear materials at all Kazakhstan nuclear facilities. The government reporting system discloses the existence of all nuclear material and its transfer intended for interaction through the export control system and the nuclear control accounting system. Nuclear material export is regulated by the regulations of the Nuclear Export Control Law. The standard operating procedure is the primary means for

  7. Computerized real-time materials accountability system for safeguards material control

    International Nuclear Information System (INIS)

    Spencer, W.F.; Affel, R.G.; Austin, H.C.; Nichols, J.P.; Stoutt, B.H.; Wachter, J.W.

    1975-01-01

    A real-time, computer-based system is described which provides safeguards material control at the Oak Ridge National Laboratory. Originally installed in 1972 to provide computerized real-time fissile materials accountability for criticality control purposes, the system has been expanded to provide accountability of all source and nuclear materials (SNM) and to utilize the on-line inventory files in support of the Laboratory physical protection and surveillance procedures. (auth)

  8. Materials to be covered by accountancy and control

    International Nuclear Information System (INIS)

    Bellinger, J.

    1989-01-01

    In the State System of Accounting for and Control of Nuclear Materials it is the responsibility of the National Authority to prescribe the points at which nuclear material begins to attract full accounting and control, and when accounting and control are terminated. NPT-type safeguards agreements, as well as prescribing the starting and terminating ponts for international safeguards, permit exemption and de-exemption from safeguards. These matters are discussed with the Australian experience providing examples

  9. A Systemic and Systematic Approach to the Development of a Policy Mix for Material Resource Efficiency

    Directory of Open Access Journals (Sweden)

    Tomas Ekvall

    2016-04-01

    Full Text Available Increasing material use efficiency is important to mitigate future supply risks and minimize environmental impacts associated with the production of the materials. The policy mix presented in this paper aims to contribute to reducing the use of virgin metals in the EU by 80% by 2050 without significant shifting of burdens to other material resources, environmental impacts, or parts of the world. We used a heuristic framework and a systems perspective for designing the policy mix that combines primary instruments designed to increase material efficiency, recycling and substitution of materials (a materials tax, the extended producer responsibility, technical regulations, and environmental taxes and supportive instruments aimed to reduce barriers to implementing the primary instruments and to contribute towards the policy objectives (e.g., research and development support, and advanced recycling centers. Furthermore, instruments were designed so as to increase political feasibility: e.g., taxes were gradually increased as part of a green fiscal reform, and border-tax adjustments were introduced to reduce impacts on competitiveness. However, even in such a policy mix design ongoing ex-ante assessments indicate that the policy mix will be politically difficult to implement—and also fall short of achieving the 80% reduction target. Nonetheless, we suggest combining primary and supportive instruments into coherent and dynamic policy mixes as a promising step towards system reconfigurations for sustainability.

  10. Alternative surfacing materials for weed control at BC Hydro substations

    International Nuclear Information System (INIS)

    Wells, T.C.; Shrimpton, G.M.

    1997-01-01

    A two year study was conducted by BC Hydro in which a variety of surfacing materials were tested for their suitability for use in substations. Ideally, surfacing materials should have the following characteristics: high electrical resistivity in both dry and wet conditions, resistance to invasion by weeds, good driveability, good drainage, non-flammable, reasonably priced, no dust to foul conductors, and be aesthetically pleasing. Trials at Vernon Koksilah, and Ingledow substations were conducted to test the materials. A qualitative estimate of the amount of weed control provided by each material was recorded. The trials were meant to provide operational recommendations and screening information to allow for future testing of promising materials or combination of materials. Results showed that no single material meets all the desired criteria. The surfaces that best combined good weed control, electrical resistance and surface stability was a 15 cm deep layer of crushed gravel, especially if underlain by a layer of geotextile. 4 refs., 3 tabs., 1 fig

  11. Controlled low strength materials (CLSM), reported by ACI Committee 229

    International Nuclear Information System (INIS)

    Rajendran, N.

    1997-01-01

    Controlled low-strength material (CLSM) is a self-compacted, cementitious material used primarily as a backfill in lieu of compacted fill. Many terms are currently used to describe this material including flowable fill, unshrinkable fill, controlled density fill, flowable mortar, flowable fly ash, fly ash slurry, plastic soil-cement, soil-cement slurry, K-Krete and other various names. This report contains information on applications, material properties, mix proportioning, construction and quality-control procedures. This report's intent is to provide basic information on CLSM technology, with emphasis on CLSM material characteristics and advantages over conventional compacted fill. Applications include backfills, structural fills, insulating and isolation fills, pavement bases, conduit bedding, erosion control, void filling, and radioactive waste management

  12. U.S. national nuclear material control and accounting system

    International Nuclear Information System (INIS)

    Taylor, S; Terentiev, V G

    1998-01-01

    Issues related to nuclear material control and accounting and illegal dealing in these materials were discussed at the April 19--20, 1996 Moscow summit meeting (G7 + Russia). The declaration from this meeting reaffirmed that governments are responsible for the safety of all nuclear materials in their possession and for the effectiveness of the national control and accounting system for these materials. The Russian delegation at this meeting stated that ''the creation of a nuclear materials accounting, control, and physical protection system has become a government priority''. Therefore, in order to create a government nuclear material control and accounting system for the Russian Federation, it is critical to study the structure, operating principles, and regulations supporting the control and accounting of nuclear materials in the national systems of nuclear powers. In particular, Russian specialists have a definite interest in learning about the National Nuclear Material Control and Accounting System of the US, which has been operating successfully as an automated system since 1968

  13. The Resource Control Debate: Enthroning Parasitism or Instituting ...

    African Journals Online (AJOL)

    ... dominated (and still dominates) political power in Nigeria.The paper argues that there is nothing fundamentally wrong with the principle of “Resource Control” which is basically a product of the weird brand of federal system in Nigeria (I choose to call it “unitary federalism”). The conclude that the “Resource Control” debate ...

  14. Smart Inverter Control and Operation for Distributed Energy Resources

    Science.gov (United States)

    Tazay, Ahmad F.

    The motivation of this research is to carry out the control and operation of smart inverters and voltage source converters (VSC) for distributed energy resources (DERs) such as photovoltaic (PV), battery, and plug-in hybrid electric vehicles (PHEV). The main contribution of the research includes solving a couple of issues for smart grids by controlling and implementing multifunctions of VSC and smart inverter as well as improving the operational scheme of the microgrid. The work is mainly focused on controlling and operating of smart inverter since it promises a new technology for the future microgrid. Two major applications of the smart inverter will be investigated in this work based on the connection modes: microgrid at grid-tied mode and autonomous mode. In grid-tied connection, the smart inverter and VSC are used to integrate DER such as Photovoltaic (PV) and battery to provide suitable power to the system by controlling the supplied real and reactive power. The role of a smart inverter at autonomous mode includes supplying a sufficient voltage and frequency, mitigate abnormal condition of the load as well as equally sharing the total load's power. However, the operational control of the microgrid still has a major issue on the operation of the microgrid. The dissertation is divided into two main sections which are: 1. Low-level control of a single smart Inverter. 2. High-level control of the microgrid. The first part investigates a comprehensive research for a smart inverter and VSC technology at the two major connections of the microgrid. This involves controlling and modeling single smart inverter and VSC to solve specific issues of microgrid as well as improve the operation of the system. The research provides developed features for smart inverter comparing with a conventional voltage sourced converter (VSC). The two main connections for a microgrid have been deeply investigated to analyze a better way to develop and improve the operational procedure of

  15. Nondestructive control of materials by ultrasonic tests

    International Nuclear Information System (INIS)

    Mercier, Noelle.

    1974-01-01

    A bibliographic study of nondestructive control methods of solids by ultrasonic tests, and of the ultrasonic emission of a transducer of finite dimension, is first presented. The principle of two of these methods is verified experimentally; they should permit the measurement of various physical parameters of solids, and the detection of local inhomogeneities. The first method calls upon the analysis of the ultrasonic signal (amplitude and phase), after it has crossed a constant thickness of a metallic specimen. This analysis reveals variations of attenuation and of ultrasonic propagation velocity within the specimen. A good spatial resolution is obtained by using 1mm-diameter probes. The second method leads, thanks to a test rig equipped with broad frequency band electrostatic transducers, to the knowledge of the attenuation law of the specimens as a function of frequency (present range: 5 to 15MHz); from this a classification of these specimens as regards their granulometry is deduced [fr

  16. Material flow analysis for resource management towards resilient palm oil production

    Science.gov (United States)

    Kamahara, H.; Faisal, M.; Hasanudin, U.; Fujie, K.; Daimon, H.

    2018-03-01

    Biomass waste generated from palm oil mill can be considered not only as the feedstock of renewable energy but also as the nutrient-rich resources to produce organic fertilizer. This study explored the appropriate resource management towards resilient palm oil production by applying material flow analysis. This study was conducted based on two palm oil mills in Lampung, Indonesia. The results showed that the empty fruit bunch (EFB) has the largest potential in terms of amount and energy among the biomass waste. The results also showed that the palm oil mills themselves had already self-managed their energy consumption thatwas obtained from palm kernel shell and palm press fiber. Finally, this study recommended the several utilization options of EFB for improvement of soil sustainability to contribute towards resilient palm oil production.

  17. Quality indexes for selecting control materials of the nuclear reactors

    International Nuclear Information System (INIS)

    Martinez-Val, J.M.; Pena, J.; Esteban Naudin, A.

    1981-01-01

    Quality indexes are established and valued for selecting control materials, The requirements for accomplishing such purposes are explained with detailed analysis: absortion cross section must be as high as possible, adequate reactivity evolution versus depletion, good resistance to radiation, appropiate thermal stability, mechanical resistance and ductility, chemical compatibility with the environment, good heat transfer properties, abundant in the nature and low costs. At present Westinghouse desire to commercialize hafnium as control material shows the exciting task of looking for new materials controlling nuclear reactors. (auth.)

  18. Material-controlled dynamic vacuum insulation

    Science.gov (United States)

    Benson, D.K.; Potter, T.F.

    1996-10-08

    A compact vacuum insulation panel is described comprising a chamber enclosed by two sheets of metal, glass-like spaces disposed in the chamber between the sidewalls, and a high-grade vacuum in the chamber includes apparatus and methods for enabling and disabling, or turning ``on`` and ``off`` the thermal insulating capability of the panel. One type of enabling and disabling apparatus and method includes a metal hydride for releasing hydrogen gas into the chamber in response to heat, and a hydrogen grate between the metal hydride and the chamber for selectively preventing and allowing return of the hydrogen gas to the metal hydride. Another type of enabling and disabling apparatus and method includes a variable emissivity coating on the sheets of metal in which the emissivity is controllably variable by heat or electricity. Still another type of enabling and disabling apparatus and method includes metal-to-metal contact devices that can be actuated to establish or break metal-to-metal heat paths or thermal short circuits between the metal sidewalls. 25 figs.

  19. Managing nuclear knowledge: IAEA activities and international coordination. Including resource material full text CD-ROM

    International Nuclear Information System (INIS)

    2005-06-01

    The present CD-ROM summarizes some activities carried out by the Departments of Nuclear Energy and Nuclear Safety and Security in the area of nuclear knowledge management in the period 2003-2005. It comprises, as open resource, most of the relevant documents in full text, including policy level documents, reports, presentation material by Member States and meeting summaries. The collection starts with a reprint of the report to the IAEA General Conference 2004 on Nuclear Knowledge [GOV/2004/56-GC(48)/12] summarizing the developments in nuclear knowledge management since the 47th session of the General Conference in 2003 and covers Managing Nuclear Knowledge including safety issues and Information and Strengthening Education and Training for Capacity Building. It contains an excerpt on Nuclear Knowledge from the General Conference Resolution [GC(48)/RES/13] on Strengthening the Agency's Activities Related to Nuclear Science, Technology and Applications. On the CD-ROM itself, all documents can easily be accessed by clicking on their titles on the subject pages (also printed at the end of this Working Material). Part 1 of the CD-ROM covers the activities in the period 2003-2005 and part 2 presents a resource material full text CD-ROM on Managing Nuclear Knowledge issued in October 2003

  20. Process of making porous ceramic materials with controlled porosity

    Science.gov (United States)

    Anderson, Marc A.; Ku, Qunyin

    1993-01-01

    A method of making metal oxide ceramic material is disclosed by which the porosity of the resulting material can be selectively controlled by manipulating the sol used to make the material. The method can be used to make a variety of metal oxide ceramic bodies, including membranes, but also pellets, plugs or other bodies. It has also been found that viscous sol materials can readily be shaped by extrusion into shapes typical of catalytic or adsorbent bodies used in industry, to facilitate the application of such materials for catalytic and adsorbent applications.

  1. The regulations concerning the uses of international controlled material

    International Nuclear Information System (INIS)

    1979-01-01

    The regulations are defined under the law for the regulations of nuclear source materials, nuclear fuel materials and reactors and provisions concerning the uses of international controlled material in the order for execution of the law. Basic concepts and terms are explained, such as: area of material delivery; fluctuation of stock; batch; real stock, effective value; fuel assembly and main measuring point. The application for permission of the uses of international controlled material shall be filed to the Director General of Science and Technology Agency by the processor, the establisher of reactor, the reprocessor or the user for each works or enterprise, listing name and address of the person, name and location of the works or the enterprise where such material is used, kind and quantity of the material and expected period of the uses. Records shall be made and kept for particular periods for each works or enterprise on specified matters, including especially delivery, stock and fluctuation of stock of nuclear source or fuel material, etc. Provisions on control of measurement, method of analysis and information processing business are stipulated. Reports shall be submitted to the Director in the forms attached on delivery, control and fluctuation of stock of nuclear source or fuel material, etc. (Okada, K.)

  2. Nuclear material control systems for nuclear power plants

    International Nuclear Information System (INIS)

    1975-06-01

    Paragraph 70.51(c) of 10 CFR Part 70 requires each licensee who is authorized to possess at any one time special nuclear material in a quantity exceeding one effective kilogram to establish, maintain, and follow written material control and accounting procedures that are sufficient to enable the licensee to account for the special nuclear material in his possession under license. While other paragraphs and sections of Part 70 provide specific requirements for nuclear material control systems for fuel cycle plants, such detailed requirements are not included for nuclear power reactors. This guide identifies elements acceptable to the NRC staff for a nuclear material control system for nuclear power reactors. (U.S.)

  3. Role of measurements in material control and accountability (abstract)

    International Nuclear Information System (INIS)

    Mahmud, T.

    2011-01-01

    Analytical techniques are widely used for verification and accountancy of nuclear materials. Nuclear Material (NM) inventories are based on sampling followed by Destructive Analysis. Destructive Analyses range from traditional chemical techniques to recent implementations of radiometric methods. These techniques are performed to quantify the amount of nuclear material (elemental assay and isotopic composition) present in a specific item, container, or in some cases facility and resolving shipper-receiver differences. Analytical techniques used for the MC and A of nuclear material normally require more attention than that for process control because the largest contribution to Material Unaccounted For is in measurement uncertainty. Therefore analytical techniques selected for material control and accountability are highly precise and they comply with accepted 'International Target Values 2010'. (author)

  4. Controller resource management : what can we learn from aircrews?

    Science.gov (United States)

    1995-07-01

    This paper provides an overview of the scientific literature regarding Crew Resource Management (CRM). It responds to tasking from the Office of Air Traffic Program Management to conduct studies addressing the application of team training models such...

  5. Digital resources and low cost of teaching materials for astronomical education

    Science.gov (United States)

    Paladino, L.; Voelzke, M. R.

    2017-12-01

    This work presents the results of the application of two questionnaires about Astronomical concepts in three classes in the first year High School of a public school in the periphery of São Paulo. In the first questionnaire was verified the prior knowledge of students. Then the intervention strategies were carried out: use of digital resources of the school, construction of mock-ups using low cost materials and the use of educational books, such as Couper & Henbest (1997), Horvath (2008). After four months, the second questionnaire was applied to verify the occurence of meaningful learning.

  6. Material accountancy and control practice at a research reactor facility

    International Nuclear Information System (INIS)

    Bouchard, J.; Maurel, J.J.; Tromeur, Y.

    1982-01-01

    This session surveys the regulations, organization, and accountancy practice that compose the French State System of Accountancy and Control. Practical examples are discussed showing how inventories are verified at a critical assembly facility and at a materials testing reactor

  7. Stimuli-Responsive Materials for Controlled Release Applications

    KAUST Repository

    Li, Song

    2015-01-01

    The controlled release of therapeutics has been one of the major challenges for scientists and engineers during the past three decades. To address this outstanding problem, the design and fabrication of stimuli-responsive materials are pursued

  8. Basic components of a national control system for nuclear materials

    International Nuclear Information System (INIS)

    Rabot, G.

    1986-01-01

    The paper presents the different aspects related to the organization and the functioning of a national control and accounting system for nuclear materials. The legal aspects and the relations with the IAEA are included

  9. Maintenance standards, care and control of the radiation protection material

    International Nuclear Information System (INIS)

    Brasesco, L.

    2004-01-01

    The present protocol in Radiology, Tomography, surgical block and intensive care unit in the Britanic Hospital from Uruguay.Between their topics find care procedures in protective clothes, periodic and control methods, material record,and staff assigned

  10. Resource efficiency of urban sanitation systems. A comparative assessment using material and energy flow analysis

    Energy Technology Data Exchange (ETDEWEB)

    Meinzinger, Franziska

    2010-07-01

    Within the framework of sustainable development it is important to find ways of reducing natural resource consumption and to change towards closed-loop management. As in many other spheres increased resource efficiency has also become an important issue in sanitation. Particularly nutrient recovery for agriculture, increased energy-efficiency and saving of natural water resources, can make a contribution to more resource efficient sanitation systems. To assess the resource efficiency of alternative developments a systems perspective is required. The present study applies a combined cost, energy and material flow analysis (ceMFA) as a system analysis method to assess the resource efficiency of urban sanitation systems. This includes the discussion of relevant criteria and assessment methods. The main focus of this thesis is the comparative assessment of different systems, based on two case studies; Hamburg in Germany and Arba Minch in Ethiopia. A range of possible system developments including source separation (e.g. diversion of urine or blackwater) is defined and compared with the current situation as a reference system. The assessment is carried out using computer simulations based on model equations. The model equations not only integrate mass and nutrient flows, but also the energy and cost balances of the different systems. In order to assess the impact of different assumptions and calculation parameters, sensitivity analyses and parameter variations complete the calculations. Based on the simulations, following general conclusions can be drawn: None of the systems show an overall benefit with regard to all investigated criteria, namely nutrients, energy, water and costs. Yet, the results of the system analysis can be used as basis for decision making if a case-related weighting is introduced. The systems show varying potential for the recovery of nutrients from (source separated) wastewater flows. For the case study of Hamburg up to 29% of the mineral

  11. Dynamic Resource Allocation and QoS Control Capabilities of the Japanese Academic Backbone Network

    Directory of Open Access Journals (Sweden)

    Michihiro Aoki

    2010-08-01

    Full Text Available Dynamic resource control capabilities have become increasingly important for academic networks that must support big scientific research projects at the same time as less data intensive research and educational activities. This paper describes the dynamic resource allocation and QoS control capabilities of the Japanese academic backbone network, called SINET3, which supports a variety of academic applications with a wide range of network services. The article describes the network architecture, networking technologies, resource allocation, QoS control, and layer-1 bandwidth on-demand services. It also details typical services developed for scientific research, including the user interface, resource control, and management functions, and includes performance evaluations.

  12. 1980 Annual status report: fissile materials control and management

    International Nuclear Information System (INIS)

    1981-01-01

    The R and D activities of the JRC in the field of Fissile Material Control and Management are oriented to the development of safeguards systems in the European Community nuclear fuel cycle and to provide means for a more efficient nuclear material management within the nuclear industry

  13. Hungarian national nuclear material control and accounting system

    International Nuclear Information System (INIS)

    Lendvai, O.

    1985-01-01

    The Hungarian system for nuclear materials control and accounting is briefly described. Sections include a historical overview, a description of nuclear activities and an outline of the organizational structure of the materials management system. Subsequent sections discuss accounting, verification and international relations

  14. State planning policy 2/07: protection of extractive resources results in certainty of materials supply

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-09-15

    Extractive resources are primary source materials used for building infrastructure such as roads, ports, airports, bridges, railways, factories, hospitals, schools and homes. The Policy seeks to protect those essential and finite construction materials for future and existing extraction purposes. Population increases in south-east Queensland the upgrading of rail and port facilities to export coal and other minerals will form a major part in the expansion of extractive industry. Over $4 billion has been committed by the Government and industry to coal infrastructure developments such as upgrades at RG Tanna, Barney Point and the proposed Wiggins Island coal terminals at Gladstone, the Dalryample Bay and Hay Point terminals near Mackay and the Abbot Point coal terminal near Bower. The new Bauhinia regional railway will service the Rolleston coal mines.

  15. Material operating behaviour of ABB BWR control rods

    International Nuclear Information System (INIS)

    Rebensdorff, B.; Bart, G.

    2000-01-01

    The BWR control rods made by ABB use boron carbide (B 4 C and hafnium as absorber material within a cladding of stainless steel. The general behaviour under operation has proven to be very good. ABB and many of their control rod customers have performed extensive inspection programs of control rod behaviour. However, due to changes in the material properties under fast and thermal neutron irradiation defects may occur in the control rods at high neutron fluences. Examinations of irradiated control rod materials have been performed in hot cell laboratories. The examinations have revealed the defect mechanism Irradiation Assisted Stress Corrosion Cracking (IASCC) to appear in the stainless steel cladding. For IASCC to occur three factors have to act simultaneously. Stress, material sensitization and an oxidising environment. Stress may be obtained from boron carbide swelling due to irradiation. Stainless steel may be sensitized to intergranular stress corrosion cracking under irradiation. Normally the reactor environment in a BWR is oxidising. The presentation focuses on findings from hot cell laboratory work on irradiated ABB BWR control rods and studies of irradiated control rod materials in the hot cells at PSI. Apart from physical, mechanical and microstructural examinations, isotope analyses were performed to describe the local isotopic burnup of boron. Consequences (such as possible B 4 C washout) of a under operation in a ABB BWR, after the occurrence of a crack is discussed based on neutron radiographic examinations of control rods operated with cracks. (author)

  16. Engineering and material aspects of impurity control systems

    International Nuclear Information System (INIS)

    Koski, J.A.

    1985-01-01

    The design of impurity control devices for fusion energy devices is discussed from the engineering and materials viewpoint. First, examples of impurity control devices are presented, and the plasma edge environment for which they are designed is briefly described. Materials concerns related to the design of the components are discussed and some currently proposed designs presented. Engineering tools available to the designer are listed, and some commonly encountered engineering analysis problems described

  17. Modeling, Analysis, and Control of Demand Response Resources

    Energy Technology Data Exchange (ETDEWEB)

    Mathieu, Johanna L. [Univ. of California, Berkeley, CA (United States)

    2012-05-01

    variability in response. We find that, in general, baseline model error is large. Though some facilities exhibit real DR variability, most observed variability results from baseline model error. In some cases, however, aggregations of C&I facilities exhibit real DR variability, which could create challenges for power system operation. These results have implications for DR program design and deployment. Emerging DR paradigms focus on faster timescale DR. Here, we investigate methods to coordinate aggregations of residential thermostatically controlled loads (TCLs), including air conditioners and refrigerators, to manage frequency and energy imbalances in power systems. We focus on opportunities to centrally control loads with high accuracy but low requirements for sensing and communications infrastructure. Specifically, we compare cases when measured load state information (e.g., power consumption and temperature) is 1) available in real time; 2) available, but not in real time; and 3) not available. We develop Markov Chain models to describe the temperature state evolution of heterogeneous populations of TCLs, and use Kalman filtering for both state and joint parameter/state estimation. We present a look-ahead proportional controller to broadcast control signals to all TCLs, which always remain in their temperature dead-band. Simulations indicate that it is possible to achieve power tracking RMS errors in the range of 0.26–9.3% of steady state aggregated power consumption. Results depend upon the information available for system identification, state estimation, and control. We find that, depending upon the performance required, TCLs may not need to provide state information to the central controller in real time or at all. We also estimate the size of the TCL potential resource; potential revenue from participation in markets; and break-even costs associated with deploying DR-enabling technologies. We find that current TCL energy storage capacity in California is 8–11

  18. Municipal wastes and landfield gases utilization - renewable resource of energy and materials

    International Nuclear Information System (INIS)

    Kuburovic, M.; Jovovic, A.

    2002-01-01

    Urbanization and industrialization, have been fundamental causes of environmental pollution (of water, air and land) which the cities were unable to handle. There is already enough evidence of the fact that the role of technology in environmental matters is moving in two important directions: sustainable development, dealing primary with global problems, and preventive technology, designed to reduce the environmental effects of processes, operations, and products. Treatment plants for industrial and municipal wastes, emission controls for incinerators, and safe landfills for waste disposal were developed to control air, water, and land pollution. Now, this 'end-of-pipe' treatment technologies are still the way of environmental protection philosophy, particularly in the developing countries. New environmental standards demand more and more rigorous preventive environmental protection technologies, therefore further development of industrial production requires the rational use of natural sources of raw materials and energy. Production and the use of goods with the minimum municipal and industrial wastes and the development of recycling technology provided closed cycle of materials. Main principles for the development and exploitation of the technology with the minimum or without waste materials and energy are: the use of renewable sources of material and energy, maximum use of waste materials and waste energy, waste minimisation and reduction of energy losses in the production, development of new industrial processes operating with minimum material and energy losses in products exploitation period and after that, and the responsible use of natural sources, products and energy in the field of industry and consumption. (author)

  19. A Dynamic Resource Scheduling Method Based on Fuzzy Control Theory in Cloud Environment

    Directory of Open Access Journals (Sweden)

    Zhijia Chen

    2015-01-01

    Full Text Available The resources in cloud environment have features such as large-scale, diversity, and heterogeneity. Moreover, the user requirements for cloud computing resources are commonly characterized by uncertainty and imprecision. Hereby, to improve the quality of cloud computing service, not merely should the traditional standards such as cost and bandwidth be satisfied, but also particular emphasis should be laid on some extended standards such as system friendliness. This paper proposes a dynamic resource scheduling method based on fuzzy control theory. Firstly, the resource requirements prediction model is established. Then the relationships between resource availability and the resource requirements are concluded. Afterwards fuzzy control theory is adopted to realize a friendly match between user needs and resources availability. Results show that this approach improves the resources scheduling efficiency and the quality of service (QoS of cloud computing.

  20. INIS-based Japanese literature materials of bibliographic tools for human resource development

    International Nuclear Information System (INIS)

    Kunii, Katsuhiko; Gonda, Mayuki; Ikeda, Kiyoshi; Nagaya, Shun; Itabashi, Keizo; Nakajima, Hidemitsu; Mineo, Yukinobu

    2011-01-01

    The Library of the Japan Atomic Energy Agency (JAEA) has developed two Japanese literature materials of bibliographic tools based on the International Nuclear Information System (INIS) of the IAEA which contains over 3.3 million records of 127 countries and 24 international organizations. These materials have been elaborated by appropriately designating Japanese terminology of nuclear field corresponding with English terminology or vice versa. One is 'Transliterated Japanese journal title list' and the other is 'INIS Thesaurus in Japanese'. While the former is served as a reference that enables users to access articles of Japanese journals better matching their needs, the latter is served as a dictionary to bridge the gap on nuclear field terminologies between over 30,000 English terms and Japanese terms which correspond with those in a semantic manner. The application of those materials to the INIS's full text collection over 280,000 of technical reports, proceedings etc. as an archive is helpful for enhancement of human resource development. The authors describe the effectiveness of those INIS-based materials with bibliographic references of Fukushima Daiichi NPS accident. (author)

  1. Report of the Material Control and Material Accounting Task Force: blueprint for the future

    International Nuclear Information System (INIS)

    1978-03-01

    A blueprint is presented for the development of improved material control and material accounting systems by integrating the goals and capabilities of material control and material accounting and recommending specific upgrading actions. An analysis is included of several specific issues and developing recommendations for future actions related to those issues. It is felt that there is a need for a program to define specific quantified goals for an integrated safeguards program, and to monitor safeguards programs in terms of these goals. NRC should give highest priority to developing regulations and guides that will enable material control to make a greater contribution to safeguards by providing greater timeliness and sensitivity in detecting and assessing material losses. It is recommended that a technical study be conducted to determine a quantitative measure or at least a figure of merit for the effectiveness of a security clearance program, based upon full field background investigations, in protecting against malevolent conspiracies involving two or more security cleared individuals. It is also recommended that a specific effort be initiated to formulate an approach to combating collusion. This effort should specifically consider the contribution that material control and material accounting programs can make to safeguards effectiveness in this area

  2. Merit exponents and control area diagrams in materials selection

    International Nuclear Information System (INIS)

    Zander, Johan; Sandstroem, Rolf

    2011-01-01

    Highlights: → Merit exponents are introduced to generalise the merit indices commonly used in materials selection. → The merit exponents can rank materials in general design situations. → To allow identification of the active merit exponent(s), control area diagrams are used. → Principles for generating the control area diagrams are presented. -- Abstract: Merit indices play a fundamental role in materials selection, since they enable ranking of materials. However, the conventional formulation of merit indices is associated with severe limitations. They are dependent on the explicit solution of the variables in the equations for the constraints from the design criteria. Furthermore, it is not always easy to determine which the controlling merit index is. To enable the ranking of materials in more general design cases, merit exponents are introduced as generalisations of the merit indices. Procedures are presented for how to compute the merit exponents numerically without having to solve equations algebraically. Merit exponents (and indices) are only valid in a certain range of property values. To simplify the identification of the controlling merit exponent, it is suggested that so called control area diagrams are used. These diagrams consist of a number of domains, each showing the active constraints and the controlling merit exponent. It is shown that the merit exponents play a crucial role when the control area diagram (CAD) is set up. The principles in the paper are developed for mechanically loaded components and are illustrated for engineering beams with two or three geometric variables.

  3. Material control and accountancy at EDF PWR plants

    International Nuclear Information System (INIS)

    de Cormis, F.

    1991-01-01

    The paper describes the comprehensive system which is developed and implemented at Electricite de France to provide a single reliable nuclear material control and accounting system for all nuclear plants. This software aims at several objectives among which are: the control and the accountancy of nuclear material at the plant, the optimization of the consistency of data by minimizing the possibility of transcription errors, the fulfillment of the statutory requirements by automatic transfer of reports to national and international safeguards authorities, the servicing of other EDF users of nuclear material data for technical or commercial purposes

  4. Accounting systems for special nuclear material control. Technical report

    International Nuclear Information System (INIS)

    Korstad, P.A.

    1980-05-01

    Nuclear material accounting systems were examined and compared to financial double-entry accounting systems. Effective nuclear material accounting systems have been designed using the principles of double-entry financial accounting. The modified double-entry systems presently employed are acceptable if they provide adequate control over the recording and summarizing of transactions. Strong internal controls, based on principles of financial accounting, can help protect nuclear materials and produce accurate, reliable accounting data. An electronic data processing system can more accurately maintain large volumes of data and provide management with more current, reliable information

  5. The role of certified reference materials in material control and accounting

    International Nuclear Information System (INIS)

    Turel, S.P.

    1979-01-01

    One way of providing an adequate material control and accounting system for the nuclear fuel cycle is to calculate material unaccounted for (MUF) after a physical inventory and to compare the limit of error of the MUF value (LEMUF) against prescribed criteria. To achieve a meaningful LEMUF, a programme for the continuing determination of systematic and random errors is necessary. Within this programme it is necessary to achieve traceability of all Special Nuclear Material (SNM) control and accounting measurements to an International/National Measurement System by means of Certified Reference Materials. SNM measurements for control and accounting are made internationally on a great variety of materials using many diverse measurement procedures by a large number of facilities. To achieve valid overall accountability over this great variety of measurements there must be some means of relating all these measurements and their uncertainties to each other. This is best achieved by an International/National Measurement System (IMS/NMS). To this end, all individual measurement systems must be compatible to the IMS/NMS and all measurement results must be traceable to appropriate international/national Primary Certified Reference Materials. To obtain this necessary compatibility for any given SNM measurement system, secondary certified reference materials or working reference materials are needed for every class of SNM and each type of measurement system. Ways to achieve ''traceability'' and the various types of certified reference material are defined and discussed in this paper. (author)

  6. RETIMAC: a real-time material control concept for strategic special nuclear material

    International Nuclear Information System (INIS)

    Shea, T.E.

    1975-01-01

    As one possible means to upgrade licensee safeguards systems, the NRC is exploring a real-time material control concept. The concept incorporates process controls, material containment provisions, and extensive instrumentation. Plants incorporating this concept would be better able to prevent, deter, and detect diversion, and to assure that diversion has not gone undetected. A substantial methods development, evaluation, and preliminary standards development program is under way to develop the basis for future policy decisions

  7. Coordinated control of distributed energy resources to support load frequency control

    International Nuclear Information System (INIS)

    Ravikumar Pandi, V.; Al-Hinai, A.; Feliachi, Ali

    2015-01-01

    Highlights: • We aims to maintain feeder power flow by the coordination of DER units. • The error in feeder flow with respect to scheduled value is used by the controller. • The particle swarm optimization is employed to minimize the error in feeder flow. • Implemented on a transmission system along with 37 bus distribution feeder. • The results of proposed feeder control is analyzed with no feeder control scheme. - Abstract: The control of generating resources to follow the unscheduled load changes is considered to be an essential process in the power system in order to maintain the frequency of power supply. This load frequency control (LFC) problem has been given more importance in the recent smart grid environment because of the impact from high penetration of distributed energy resources (DER) installed at the distribution level. The renewable sources are highly intermittent in nature, so it is required to coordinate and control the DER units to maintain the feeder power flow at substation bus bar which is seen by transmission system operator during the LFC process. This paper aims to identify the impact of distributed generation and its control method to reduce the deviation of feeder power flow from the scheduled value in real time operation. The error in feeder power flow with respect to scheduled value is utilized by the PI controller to estimate the change in power reference of all DER units. The power output of DER units are maintained to reference values by the individual PI controllers. The particle swarm optimization algorithm is employed to minimize the error in feeder power flow by optimally tuning the gain values of all PI controllers. The proposed method is examined on a small transmission system along with the feeder of IEEE 37 bus distribution system with balanced loading condition. The complete system along with DER units is implemented in the MATLAB based stability package named Power Analysis Toolbox (PAT) for performing time domain

  8. Automatized material and radioactivity flow control tool in decommissioning process

    International Nuclear Information System (INIS)

    Rehak, I.; Vasko, M.; Daniska, V.; Schultz, O.

    2009-01-01

    In this presentation the automatized material and radioactivity flow control tool in decommissioning process is discussed. It is concluded that: computer simulation of the decommissioning process is one of the important attributes of computer code Omega; one of the basic tools of computer optimisation of decommissioning waste processing are the tools of integral material and radioactivity flow; all the calculated parameters of materials are stored in each point of calculation process and they can be viewed; computer code Omega represents opened modular system, which can be improved; improvement of the module of optimisation of decommissioning waste processing will be performed in the frame of improvement of material procedures and scenarios.

  9. HB-Line Material Control and Accountability Measurements at SRS

    International Nuclear Information System (INIS)

    Casella, V.R.

    2003-01-01

    Presently, HB-Line work at the Savannah River Site consists primarily of the stabilization and packaging of nuclear materials for storage and the characterization of materials for disposition in H-Area. In order to ensure compliance with Material Control and Accountability (MC and A) Regulations, accountability measurements are performed throughout the HB-Line processes. Accountability measurements are used to keep track of the nuclear material inventory by constantly updating the amount of material in the MBAs (Material Balance Area) and sub-MBAs. This is done by subtracting the amount of accountable material that is added to a process and by adding the amount of accountable material that is put back in storage. A Physical Inventory is taken and compared to the ''Book Value'' listed in the Nuclear Material Accounting System. The difference (BPID) in the Book Inventory minus the Physical Inventory of a sub-account for bulk material must agree within the measurement errors combined in quadrature to provide assurance that nuclear material is accounted for. This work provides an overview of HB-Line processes and accountability measurements. The Scrap Recovery Line and Neptunium-237/Plutonium-239 Oxide Line are described and sampling and analyses for Phase II are provided. Recommendations for improvements are provided to improve efficiency and cost effectiveness

  10. Smart Materials in Structural Health Monitoring, Control and Biomechanics

    CERN Document Server

    Soh, Chee-Kiong; Bhalla, Suresh

    2012-01-01

    "Smart Materials in Structural Health Monitoring, Control and Biomechanics" presents the latest developments in structural health monitoring, vibration control and biomechanics using smart materials. The book mainly focuses on piezoelectric, fibre optic and ionic polymer metal composite materials. It introduces concepts from the very basics and leads to advanced modelling (analytical/ numerical), practical aspects (including software/ hardware issues) and case studies spanning civil, mechanical and aerospace structures, including bridges, rocks and underground structures. This book is intended for practicing engineers, researchers from academic and R&D institutions and postgraduate students in the fields of smart materials and structures, structural health monitoring, vibration control and biomedical engineering. Professor Chee-Kiong Soh and Associate Professor Yaowen Yang both work at the School of Civil and Environmental Engineering, Nanyang Technological University, Singapore. Dr. Suresh Bhalla is an A...

  11. Material control and accountability in nuclear fuel cycle

    International Nuclear Information System (INIS)

    Rumyantsev, A.N.

    2006-01-01

    It is proposed to unify the complexes, used in the systems for control and accountability of nuclear materials, and to use the successful experience of developing these complexes. It is shown that the problem of control, accountability and physical protection may by achieved by using the developed complex Probabilistic expert-advising system, permitting to analyse the safety in nuclear fuel cycles [ru

  12. Smart Materials and Active Noise and Vibration Control in Vehicles

    NARCIS (Netherlands)

    Doppenberg, E.J.J.; Berkhoff, Arthur P.; van Overbeek, M.; Gissinger, G.L.

    2001-01-01

    The paper presents the results for the reduction of sound radiated from a structure using different control methodologies, and discusses two approaches for active structural acoustic control: the acoustic approach or the vibro-acoustic approach. Integrated actuators in structure material are

  13. New Control Paradigms for Resources Saving: An Approach for Mobile Robots Navigation

    Directory of Open Access Journals (Sweden)

    Rafael Socas

    2018-01-01

    Full Text Available In this work, an event-based control scheme is presented. The proposed system has been developed to solve control problems appearing in the field of Networked Control Systems (NCS. Several models and methodologies have been proposed to measure different resources consumptions. The use of bandwidth, computational load and energy resources have been investigated. This analysis shows how the parameters of the system impacts on the resources efficiency. Moreover, the proposed system has been compared with its equivalent discrete-time solution. In the experiments, an application of NCS for mobile robots navigation has been set up and its resource usage efficiency has been analysed.

  14. New Control Paradigms for Resources Saving: An Approach for Mobile Robots Navigation.

    Science.gov (United States)

    Socas, Rafael; Dormido, Raquel; Dormido, Sebastián

    2018-01-18

    In this work, an event-based control scheme is presented. The proposed system has been developed to solve control problems appearing in the field of Networked Control Systems (NCS). Several models and methodologies have been proposed to measure different resources consumptions. The use of bandwidth, computational load and energy resources have been investigated. This analysis shows how the parameters of the system impacts on the resources efficiency. Moreover, the proposed system has been compared with its equivalent discrete-time solution. In the experiments, an application of NCS for mobile robots navigation has been set up and its resource usage efficiency has been analysed.

  15. The Resource Control Debate: Enthroning Parasitism or Instituting ...

    African Journals Online (AJOL)

    User

    principle of “Resource Control” which is basically a product of the weird brand of ... lopsided development benefits within the Nigerian space – economy, has ..... an invitation to the disintegration of the country, as they fear that this may be.

  16. Diffusion in Solids Fundamentals, Methods, Materials, Diffusion-Controlled Processes

    CERN Document Server

    Mehrer, Helmut

    2007-01-01

    Diffusion is a vital topic in solid-state physics and chemistry, physical metallurgy and materials science. Diffusion processes are ubiquitous in solids at elevated temperatures. A thorough understanding of diffusion in materials is crucial for materials development and engineering. This book first gives an account of the central aspects of diffusion in solids, for which the necessary background is a course in solid state physics. It then provides easy access to important information about diffuson in metals, alloys, semiconductors, ion-conducting materials, glasses and nanomaterials. Several diffusion-controlled phenomena, including ionic conduction, grain-boundary and dislocation pipe diffusion, are considered as well. Graduate students in solid-state physics, physical metallurgy, materials science, physical and inorganic chemistry or geophysics will benefit from this book as will physicists, chemists, metallurgists, materials engineers in academic and industrial research laboratories.

  17. Establishing control over nuclear materials and radiation sources in Georgia

    International Nuclear Information System (INIS)

    Basilia, G.

    2010-01-01

    Regulatory control over radiation sources in Georgia was lost after disintegration of the Soviet Union. A number of radiation accidents and illegal events occurred in Georgia. From 1999 Nuclear and Radiation Safety Service of the Ministry of Environmental Protection and Natural Resources is responsible for regulatory control over radiation sources in Georgia. US NRC Regulatory Assistance Program in Georgia Assist the Service in establishing long term regulatory control over sources. Main focuses of US NRC program are country-wide inventory, create National Registry of sources, safe storage of disused sources, upgrade legislation and regulation, implementation licensing and inspection activities

  18. Effect of locus of resource control on operational efficiency in distributed operations

    Science.gov (United States)

    Geoffroy, A. L.

    1991-01-01

    The following topics are presented in view graph form: space network control (SNC) usage in the Advanced Tracking and Data Relay Satellite (ATDRSS) era; an acronym and icon list; demands of the SNC; tightness of resources coupling; sharing information and sharing control; potential ways of distributing control; efficiency problems unrelated to distribution of control; efficiency problems related to distribution of control; and recommendations.

  19. Minority Threat, Crime Control, and Police Resource Allocation in the Southwestern United States

    Science.gov (United States)

    Holmes, Malcolm D.; Smith, Brad W.; Freng, Adrienne B.; Munoz, Ed A.

    2008-01-01

    Numerous studies have examined political influences on communities' allocations of fiscal and personnel resources to policing. Rational choice theory maintains that these resources are distributed in accordance with the need for crime control, whereas conflict theory argues that they are allocated with the aim of controlling racial and ethnic…

  20. Differences between resource control types revisited : A short term longitudinal study

    NARCIS (Netherlands)

    Reijntjes, Albert|info:eu-repo/dai/nl/265818494; Vermande, Marjolijn|info:eu-repo/dai/nl/138483515; Olthof, Tjeert; Goossens, Frits A; Vink, Gerko|info:eu-repo/dai/nl/323348793; Aleva, Liesbeth|info:eu-repo/dai/nl/141299789; van der Meulen, Matty

    2018-01-01

    Hawley's influential resource control theory (RCT) posits that both coercive and prosocial strategies may yield social dominance, as indexed by resource control. Based on differences in youths’ relative use of these strategies, RCT a priori defines five distinct subtypes. Several studies by Hawley

  1. Direct product quality control for energy efficient climate controlled transport of agro-material

    NARCIS (Netherlands)

    Verdijck, G.J.C.; Preisig, H.A.; Straten, van G.

    2005-01-01

    A (model-based) Product Quality Controller is presented for climate controlled operations involving agro-material, such as storage and transport. This controller belongs to the class of Model Predictive Controllers and fits in a previously developed hierarchical control structure. The new Product

  2. ECONOMIC AND LEGAL ASPECTS OF MANAGEMENT OF WASTES AND SECONDARY MATERIAL RESOURCES (ON THE EXAMPLE OF CONSTRUCTION COMPLEX

    Directory of Open Access Journals (Sweden)

    Tskhovrebov Eduard Stanislavovich

    2018-05-01

    Full Text Available Subject: technical and economic processes and aspects of handling wastes and secondary material resources; stages of transition of anthropogenic object of environment to wastes and secondary material resources; technical possibility and economic feasibility of using secondary material resources as a secondary raw material for making products, providing energy, works, services. The problem of economy and rational use of material and power resources is relevant and significant within the limits of maintenance of a strategic course of Russia on innovative sustainable development. In this article, issues of actualization and harmonization of the regulatory and legal base in the field of management of wastes and secondary material resources are considered from the viewpoint of maintenance of minimization of waste formation and maximum use of secondary material resources in an industrial-economic cycle, provision of economic incentives for innovative activity in the given field. The actual multi-plan problem, chosen here as a topic of research, concerns regulations in management of wastes and secondary material resources in construction complex, in which economic, civil-law, ecological, social, industrial and legal relations are closely coordinated and define a subject of the present research. Production and consumption waste is a dangerous anthropogenic object of the environment but at the same time, it is a valuable secondary material resource. The non-use of wastes to be recycled as secondary raw materials for energy generation, production and, as a result, their increasing accumulation in the environment causes irreparable harm to natural objects and human health due to their dangerous properties. Research objectives: scientific and methodological substantiation of legal regulation, economic basis for formation of wastes and secondary material resources management system (on the example of construction complex and building materials industry

  3. Control of Nuclear Materials and Special Equipment (Nuclear Safety Regulations)

    International Nuclear Information System (INIS)

    Cizmek, A.; Prah, M.; Medakovic, S.; Ilijas, B.

    2008-01-01

    Based on Nuclear Safety Act (OG 173/03) the State Office for Nuclear Safety (SONS) in 2008 adopted beside Ordinance on performing nuclear activities (OG 74/06) and Ordinance on special conditions for individual activities to be performed by expert organizations which perform activities in the area of nuclear safety (OG 74/06) the new Ordinance on the control of nuclear material and special equipment (OG 15/08). Ordinance on the control of nuclear material and special equipment lays down the list of nuclear materials and special equipment as well as of nuclear activities covered by the system of control of production of special equipment and non-nuclear material, the procedure for notifying the intention to and filing the application for a license to carry out nuclear activities, and the format and contents of the forms for doing so. This Ordinance also lays down the manner in which nuclear material records have to be kept, the procedure for notifying the State administration organization (regulatory body) responsible for nuclear safety by the nuclear material user, and the keeping of registers of nuclear activities, nuclear material and special equipment by the State administration organization (regulatory body) responsible for nuclear safety, as well as the form and content of official nuclear safety inspector identification card and badge.(author)

  4. The potential value of dynamic materials control in international safeguards

    International Nuclear Information System (INIS)

    Keepin, G.R.; Lovett, J.E.

    1979-01-01

    The difficulties inherent in conventional materials accountancy based on semi-annual or annual shutdown cleanout physical inventories have been recognized for many years. The increasing importance of international nuclear materials safeguards, coupled with the availability of advanced non-destructive measurement technology which could be installed on or near process lines, has led to the development of the concept of advanced or dynamic materials control. The potential benefits of dynamic materials control in terms of significantly improved detection capabilities (ranging from a few kilograms of plutonium down to perhaps a few hundred grams, even for large-scale bulk processing facilities), and even more dramatically improved detection timeliness (typically a few days, and potentially only a few hours, in advanced facilities), are reviewed. At least twelve major dynamic material control systems already in existence or in the process of being installed are noted, and some of the essential characteristics are discussed. Some currently unresolved questions are explored, and future prospects for the concept of dynamic material control in international safeguards are reviewed. (author)

  5. The regulations concerning the uses of international controlled material

    International Nuclear Information System (INIS)

    1978-01-01

    These provisions are established on the basis of and to enforce ''The law for the regulations of nuclear source materials, nuclear fuel materials and reactors'' and the ''Prescriptions on the usage of internationally regulated goods'' in the Enforcement Ordinance of the Law. Terms are explained, such as area for incoming and outgoing of goods, main measuring point, batch and real stocks. Applications for the permission of the use of internationally regulated goods shall be filed, in which the kinds of such goods for the materials and equipments in each partner country, with which international agreement was concluded, and the quantity and expected period of use of each regulated material must be written. The users of such regulated materials shall keep the records on the usage of such materials in each factory or establishment. Such records include the quantities of receiving and delivering and stocks of nuclear raw material of each kind, radiation control reports and the records of accidents in the facilities for using nuclear raw materials. Applications for the approval of the stipulation on the management of measurement shall be filed, in which the functions and organizations of the persons engaging in the measurement and control of internationally regulated goods, the establishment of the areas for receiving and delivering the goods and the marks to be put on such areas, etc. Applications for the designation as the persons engaging in information processing works are specified. (Okada, K.)

  6. 10 CFR 74.41 - Nuclear material control and accounting for special nuclear material of moderate strategic...

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Nuclear material control and accounting for special nuclear material of moderate strategic significance. 74.41 Section 74.41 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) MATERIAL CONTROL AND ACCOUNTING OF SPECIAL NUCLEAR MATERIAL Special Nuclear Material...

  7. Human Resource Management in COSO Internal Control: Integrated Framework

    OpenAIRE

    Uysal, Gürhan

    2010-01-01

    COSO perceives human resource management (HRM) as an organizational governance technic. Because COSO aims to increase efficency and effectiveness of business operations, reliability of financial reporting, and compliance with applicable laws and regulations. Therefore, for example, in COSO HRM policy and practices should enable organizations to achieve organizational goals and objectives. Moreover, HRM is to find out best-ability and capable employees for managerial positions. In addition, or...

  8. Material Control and Accountability Experience at the Fuel Conditioning Facility

    International Nuclear Information System (INIS)

    Vaden, D.; Fredrickson, G.L.

    2007-01-01

    The Fuel Conditioning Facility (FCF) at the Idaho National Laboratory (INL) treats spent nuclear fuel using an electrometallurgical process that separates the uranium from the fission products, sodium thermal bond, and cladding materials. Material accountancy is necessary at FCF for two reasons: 1) it provides a mechanism for detecting a potential loss of nuclear material for safeguards and security, and 2) it provides a periodic check of inventories to ensure that processes and materials are within control limits. Material Control and Accountability is also a Department of Energy (DOE) requirement (DOE Order 474.1). The FCF employs a computer based Mass Tracking (MTG) System to collect, store, retrieve, and process data on all operations that directly affect the flow of materials through the FCF. The MTG System is important for the operations of the FCF because it supports activities such as material control and accountability, criticality safety, and process modeling. To conduct material control and accountability checks and to monitor process performance, mass balances are routinely performed around the process equipment. The equipment used in FCF for pyro-processing consists of two mechanical choppers and two electro-refiners (the Mark-IV with the accompanying element chopper and Mark-V with the accompanying blanket chopper for processing driver fuel and blanket, respectively), and a cathode processor (used for processing both driver fuel and blanket) and casting furnace (mostly used for processing driver fuel). Performing mass balances requires the measurement of the masses and compositions of several process streams and equipment inventories. The masses of process streams are obtained via in-cell balances (i.e., load cells) that weigh containers entering and leaving the process equipment. Samples taken at key locations are analyzed to determine the composition of process streams and equipment inventories. In cases where equipment or containers cannot be

  9. The importance of reference materials in doping-control analysis.

    Science.gov (United States)

    Mackay, Lindsey G; Kazlauskas, Rymantas

    2011-08-01

    Currently a large range of pure substance reference materials are available for calibration of doping-control methods. These materials enable traceability to the International System of Units (SI) for the results generated by World Anti-Doping Agency (WADA)-accredited laboratories. Only a small number of prohibited substances have threshold limits for which quantification is highly important. For these analytes only the highest quality reference materials that are available should be used. Many prohibited substances have no threshold limits and reference materials provide essential identity confirmation. For these reference materials the correct identity is critical and the methods used to assess identity in these cases should be critically evaluated. There is still a lack of certified matrix reference materials to support many aspects of doping analysis. However, in key areas a range of urine matrix materials have been produced for substances with threshold limits, for example 19-norandrosterone and testosterone/epitestosterone (T/E) ratio. These matrix-certified reference materials (CRMs) are an excellent independent means of checking method recovery and bias and will typically be used in method validation and then regularly as quality-control checks. They can be particularly important in the analysis of samples close to threshold limits, in which measurement accuracy becomes critical. Some reference materials for isotope ratio mass spectrometry (IRMS) analysis are available and a matrix material certified for steroid delta values is currently under production. In other new areas, for example the Athlete Biological Passport, peptide hormone testing, designer steroids, and gene doping, reference material needs still need to be thoroughly assessed and prioritised.

  10. Resource Use in Small Island States: Material Flows in Iceland and Trinidad and Tobago, 1961-2008.

    Science.gov (United States)

    Krausmann, Fridolin; Richter, Regina; Eisenmenger, Nina

    2014-04-01

    Iceland and Trinidad and Tobago are small open, high-income island economies with very specific resource-use patterns. This article presents a material flow analysis (MFA) for the two countries covering a time period of nearly five decades. Both countries have a narrow domestic resource base, their economy being largely based on the exploitation of one or two key resources for export production. In the case of Trinidad and Tobago, the physical economy is dominated by oil and natural gas extraction and petrochemical industries, whereas Iceland's economy for centuries has been based on fisheries. More recently, abundant hydropower and geothermal heat were the basis for the establishment of large export-oriented metal processing industries, which fully depend on imported raw materials and make use of domestic renewable electricity. Both countries are highly dependent on these natural resources and vulnerable to overexploitation and price developments. We show how the export-oriented industries lead to high and growing levels of per capita material and energy use and carbon dioxide emissions resulting from large amounts of processing wastes and energy consumption in production processes. The example of small open economies with an industrial production system focused on few, but abundant, key resources and of comparatively low complexity provides interesting insights of how resource endowment paired with availability or absence of infrastructure and specific institutional arrangements drives domestic resource-use patterns. This also contributes to a better understanding and interpretation of MFA indicators, such as domestic material consumption.

  11. IMPORTANCE OF MATERIAL BALANCES AND THEIR STATISTICAL EVALUATION IN RUSSIAN MATERIAL, PROTECTION, CONTROL AND ACCOUNTING

    International Nuclear Information System (INIS)

    Fishbone, L.G.

    1999-01-01

    While substantial work has been performed in the Russian MPC and A Program, much more needs to be done at Russian nuclear facilities to complete four necessary steps. These are (1) periodically measuring the physical inventory of nuclear material, (2) continuously measuring the flows of nuclear material, (3) using the results to close the material balance, particularly at bulk processing facilities, and (4) statistically evaluating any apparent loss of nuclear material. The periodic closing of material balances provides an objective test of the facility's system of nuclear material protection, control and accounting. The statistical evaluation using the uncertainties associated with individual measurement systems involved in the calculation of the material balance provides a fair standard for concluding whether the apparent loss of nuclear material means a diversion or whether the facility's accounting system needs improvement. In particular, if unattractive flow material at a facility is not measured well, the accounting system cannot readily detect the loss of attractive material if the latter substantially derives from the former

  12. Control of radioactive material transport in sodium-cooled reactors

    International Nuclear Information System (INIS)

    Brehm, W.F.

    1980-03-01

    The Radioactivity Control Technology (RCT) program was established by the Department of Energy to develop and demonstrate methods to control radionuclide transport to ex-core regions of sodium-cooled reactors. This radioactive material is contained within the reactor heat transport system with any release to the environment well below limits established by regulations. However, maintenance, repair, decontamination, and disposal operations potentially expose plant workers to radiation fields arising from radionuclides transported to primary system components. This paper deals with radioactive material generated and transported during steady-state operation, which remains after 24 Na decay. Potential release of radioactivity during postulated accident conditions is not discussed. The control methods for radionuclide transport, with emphasis on new information obtained since the last Environmental Control Symposium, are described. Development of control methods is an achievable goal

  13. Report of the Material Control and Material Accounting Task Force: summary

    International Nuclear Information System (INIS)

    1978-03-01

    A special review was made of the safeguards maintained by licensees possessing 5 kg or more of strategic special nuclear material (SSNM), i.e., plutonium, uranium-233, or uranium enriched in the uranium-235 isotope to 20 percent or more. A Task Force was formed to define the roles and objectives of material control and material accounting in the NRC safeguards program; recommend goals for material control and material accounting systems based on their roles and objectives; assess the extent to which the existing regulatory base meets or provides the capability to meet the recommended goals; and to provide direction for material control and material accounting development, including both near-term and long-term upgrades. Based on results of Task Force investigations it is recommended that licensee plans for measurement control programs be submitted in response to Section 70.57(c) of Title 10 of the Code of Federal Regulations. Other recommendations include the review and upgrading, as necessary, of measurement error propagation models used by each licensee; revision of Nuclear Materials Management and Safeguards System (NMMSS) reporting entities for SSNM licensees to be consistent with the partitioning of facilities into plants or, if appropriate, accounting units; review of NMMSS reporting entities for SSNM licensees to assure that data for high enriched uranium operations are clearly separated from low enriched uranium operations; upgrading of the editing by NMMSS of reported licensee safeguards data for accuracy and consistency; and the acquisition of (a) a secure interactive computer capability for use in collecting, storing, sorting, and analyzing special nuclear material accounting data, and (b) associated flexible computer software that presents safeguards information in a succinct and comprehensive manner

  14. New flexible thermal control material for long-life satellite

    International Nuclear Information System (INIS)

    Sasaki, Shigekuni; Hasuda, Yoshinori; Ichino, Toshihiro

    1986-01-01

    Flexible thermal control materials are light weight, cheap and excellent in the practical applicability, and are expected to be applied to future long life, large capacity satellites. However, the flexible thermal control materials used at present have the defect that either the space environment withstanding capability or the thermal control performance is poor. Therefore, the authors examined the flexible thermal control materials which are excellent in both these properties, and have developed the thermal control material PEI-OSR using polyether imide films as the substrate. In this study, while comparing with the FEP Teflon with silver vapor deposition, which has been used so far for short life satellites, the long term reliability of the PEI-OSR supposing the use for seven years was examined. As the results, the FEP Teflon with silver vapor deposition caused cracking and separation by irradiation and heat cycle test, and became unusable, but the PEI-OSR did not change its flexibility at all. Also the thermal control performance of the PEI-OSR after the test equivalent to seven years was superior to the initial performance of the Kaptone with aluminum vapor deposition, which has excellent space environment endurance, thus it was clarified that the PEI-OSR is the most excellent for this purpose. (Kako, I.)

  15. Evaluation of a webquest on the theme "management of material resources in nursing" by undergraduate students.

    Science.gov (United States)

    Pereira, Marta Cristiane Alves; Melo, Márcia Regina Antonietto da Costa; Silva, Adriana Serafim Bispo E; Evora, Yolanda Dora Martinez

    2010-01-01

    The learning process mediated by information and communication technology has considerable importance in the current context. This study describes the evaluation of a WebQuest on the theme "Management of Material Resources in Nursing". It was developed in three stages: Stage 1 consisted of its pedagogical aspect, that is, elaboration and definition of content; Stage 2 involved the organization of content, inclusion of images and completion; Stage 3 corresponded to its availability to students. Results confirm the importance of information technology and information as instruments for a mediating teaching practice in the integration between valid knowledge and the complex and dynamic reality of health services. As a result of the students' favorable evaluation of the approximation with the reality of nursing work and satisfaction for performing the activity successfully, the WebQuest method was considered valid and innovating for the teaching-learning process.

  16. Materials and energy resources. Report of the research committee working party

    International Nuclear Information System (INIS)

    1976-01-01

    The Working Party has tried to assess the problems likely to stem from future scarcity of a number of important materials and how these interact with the simultaneous depletion of energy resources. The report examines in detail the likely areas of shortages, and their economic, social and political implications, and suggests the various choices for preventive or corrective action. In its recommendations it has delineated areas not only for research but for action by government and by professional and other bodies. The need is forseen for a nuclear power programme of possibly 35 GW(e) by the end of the century part of which could be from fast breeders. Uranium supplies would appear to be adequate only if fast breeders become available. Nuclear fusion is potentially a very large energy source but only for the distant future. (author)

  17. Environmental impact of coal utilization (from raw material to waste resources): Proceedings

    International Nuclear Information System (INIS)

    Sahu, K.C.

    1991-10-01

    The proceedings contains 27 papers presented at the conference on environmental impact of coal utilization from raw material to waste resources which was held at the Indian Institute of Technology, Bombay, during 14-15 January 1991. The conference was held as a follow-up of the research project to study the impact of coal utilization. The project was undertaken jointly by the Indian Institute of Technology, Bombay and the University of Western Ontario, Canada. The project was funded by the International Development Research Centre, Ottawa (Canada). The principle themes of the conference were : occurrence of trace elements in coal, fate of trace elements during combustion of coal, characterisation of fly ash and its properties and utilization, and environmental impact of ash disposal. (M.G.B.)

  18. R'07 World Congress - Recovery of materials and energy for resource efficiency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    This final congress report summarises the topics dealt with at the R'07 World Congress on the recovery of materials and energy for resource efficiency. The congress was held in 2007 in Davos, Switzerland. Details on the organisation and participants are given and the experts who held plenary lectures are listed. Brief details are given on oral and poster sessions, along with details on how the proceedings of the congress can be obtained. Workshops held at the conference covered the following topics: Plastics recycling, biofuels and E-waste, workshops on zero wastes, scarce metals and the identification and management of social implications over the product life cycle (footprint). An Internet-address where the results of the sessions can be obtained is given along with a summary of excursions and social events held within the framework of the congress. Finally, participant feedback is presented in graphical form.

  19. Material control and accounting at Exxon Nuclear, I

    International Nuclear Information System (INIS)

    Schneider, R.A.

    1985-01-01

    The nuclear material control and accounting system at Exxon Nuclear will be described in detail. Subjects discussed will include: the basis of the MC and A system, the nuclear materials accounting systems (NMRS and NICS), physical inventory taking, IAEA inspection experience, safeguards organization, measurements and measurement control, MUF evaluation, accounting forms and reports and use of tamper-indicating seals. The general requirements for material accounting and control in this type of a bulk-handling facility are described. The way those requirements are met for the subject areas shown above is illustrated using a reference (Model Plant) version of the Exxon Nuclear plant The difference between the item-accounting procedures used at reactor facilities and the bulk-accounting procedures used at fuel fabrication facilities is discussed in detail

  20. Nanomodified heat-accumulating materials controlled by a magnetic field

    Science.gov (United States)

    Shchegolkov, Alexander; Shchegolkov, Alexey; Dyachkova, Tatyana; Bodin, Nikolay; Semenov, Alexander

    2017-11-01

    The paper presents studies of nanomodified heat-accumulating materials controlled by a magnetic field. In order to obtain controlled heat-accumulating materials, synthetic motor oil CASTROL 0W30, ferromagnetic particles, CNTs and paraffin were used. Mechanically activated carbon nanotubes with ferromagnetic particles were used for the nanomodification of paraffin. Mechanoactivation ensured the production of ferromagnetic particles with an average particle size of 5 µm. Using an extrusion plant, a mixture of CNTs and ferromagnetic particles was introduced into the paraffin. Further, the nanomodified paraffin in a granular form was introduced into synthetic oil. To conduct experimental studies, a contactless method for measuring temperature was used. The thermal contact control with the help of the obtained nanomodified material is possible with a magnetic induction of 1250 mT, and a heat flux of about 74 kW/m2 is provided at the same time.

  1. Nuclear material control and accountancy planning and performance testing

    International Nuclear Information System (INIS)

    Mike Enhinger; Dennis Wilkey; Rod Martin; Ken Byers; Brian Smith

    1999-01-01

    An overview of performance testing as used at U.S. Department of Energy facilities is provided. Performance tests are performed on specific aspects of the regulations or site policy. The key issues in establishing a performance testing program are: identifying what needs to be tested; determining how to test; establishing criteria to evaluate test results. The program elements of performance testing program consist of: planning; coordination; conduct; evaluation. A performance test may be conducted of personnel or equipment. The DOE orders for nuclear material control and accountancy are divided into three functional areas: program administration, material accounting, and material control. Examples performance tests may be conducted on program administration, accounting, measurement and measurement control, inventory, and containment [ru

  2. Use of blog as a supplementary study material resource in dentistry: An Indian experience

    Directory of Open Access Journals (Sweden)

    Thavarajah Rooban

    2014-01-01

    Full Text Available Objective: Social networking sites (SNS are emerging as an alternate teaching resource. The reach and access characteristics of SNS for a noninstitutional, academic blog in an Indian setting has not been documented and this manuscript aim to address this lacunae. Materials and Methods: A blog for oral histology, an integral basic dental subject and its Facebook promotional page was created. The access characteristics were observed using Google analytics. The Facebook promotional pages of the blog access characteristics are presented. Results: A total of 582 people visited the blog during the study period. Majority of them used Google Chrome from desktop/laptop to access the blog. There were 2723 page visits in all. Visitors from 36 countries and 99 cities across the globe accessed the blog. In all through Facebook, the promotional page reached 36,543 people. The total number of people engaged through Facebook promotion page was 10,757. Conclusion: Access characteristics of the noninstitutional, academic blog have been described for the first time in dentistry. The lessons learnt through this exercise would be helpful in designing e-mentoring courses as well promotional pages of such events in the future. The necessity of making the mentors and students to adapt to e-learning and digital learning resources before drawing such programs is highlighted.

  3. Development and demonstration program for dynamic nuclear materials control

    International Nuclear Information System (INIS)

    Augustson, R.H.; Baron, N.; Ford, R.F.; Ford, W.; Hagen, J.; Li, T.K.; Marshall, R.S.; Reams, V.S.; Severe, W.R.; Shirk, D.G.

    1978-01-01

    A significant portion of the Los Alamos Scientific Laboratory Safeguards Program is directed toward the development and demonstration of dynamic nuclear materials control. The building chosen for the demonstration system is the new Plutonium Processing Facility in Los Alamos, which houses such operations as metal-to-oxide conversion, fuel pellet fabrication, and scrap recovery. A DYnamic MAterials Control (DYMAC) system is currently being installed in the facility as an integral part of the processing operation. DYMAC is structured around interlocking unit-process accounting areas. It relies heavily on nondestructive assay measurements made in the process line to draw dynamic material balances in near real time. In conjunction with the nondestructive assay instrumentation, process operators use interactive terminals to transmit additional accounting and process information to a dedicated computer. The computer verifies and organizes the incoming data, immediately updates the inventory records, monitors material in transit using elapsed time, and alerts the Nuclear Materials Officer in the event that material balances exceed the predetermined action limits. DYMAC is part of the United States safeguards system under control of the facility operator. Because of its advanced features, the system will present a new set of inspection conditions to the IAEA, whose response is the subject of a study being sponsored by the US-IAEA Technical Assistance Program. The central issue is how the IAEA can use the increased capabilities of such a system and still maintain independent verification

  4. Controlling fugitive dust emissions in material handling operations

    Energy Technology Data Exchange (ETDEWEB)

    Tooker, G E

    1992-05-01

    The primary mechanism of fugitive dust generation in bulk material handling transfer operations is by dispersion of dust in turbulent air induced to flow with falling or projected material streams. This paper returns to basic theories of particle dynamics and fluid mechanics to quantify the dust generating mechanism by rational analysis. Calculations involving fluid mechanisms are made easier by the availability of the personal computer and the many math manipulating programs. Rational analysis is much more cost effective when estimating collection air volumes to control fugitive emissions; especially in enclosed material handling transfers transporting large volumes of dusty material. Example calculations, using a typical enclosed conveyor-to-conveyor transfer operation are presented to illustrate and highlight the key parameters that determine the magnitude of induced air flow that must be controlled. The methods presented in this paper for estimating collection air volumes apply only enclosed material handling transfers, exhausted to a dust collector. Since some assistance to the control of dust emissions must be given by the material handling transfer chute design, a discussion of good transfer chute design practice is presented. 4 refs., 2 figs., 2 tabs.

  5. Infection prevention and control in outpatient settings in China-structure, resources, and basic practices.

    Science.gov (United States)

    Qiao, Fu; Huang, Wenzhi; Zong, Zhiyong; Yin, Weijia

    2018-01-25

    More than 7 billion visits are made by patients to ambulatory services every year in mainland China. Healthcare-associated infections are becoming a new source of illness for outpatients. Little is known about infection prevention, control structure, resources available, and basic practices in outpatient settings. In 2014, we conducted a multisite survey. Five provinces were invited to participate based on geographic dispersion. Self-assessment questionnaires regarding the structure, infrastructure, apparatus and materials, and basic activities of infection prevention and control were issued to 25 hospitals and 5 community health centers in each province. A weight was assigned to each question according to its importance. Overall, 146 of 150 facilities (97.3%) participated in this study. The average survey score was 77.6 (95% confidence interval 75.7-79.5) and varied significantly between the different gross domestic product areas (P infection prevention and control was practiced consistently, although there were lapses in some areas. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

  6. Materials control and accountability at the Idaho Chemical Processing Plant

    International Nuclear Information System (INIS)

    Denning, G.E.; Britschgi, J.J.; Spraktes, F.W.

    1985-01-01

    The ICPP high enriched uranium recovery process has historically been operated as a single Material Balance Area (MBA), with input and output measurement capabilities. Safeguards initiated changes in the last five years have resulted in significant materials control and accountability improvements. Those changes include semi-automation of process accountability measurement, data collection and recording; definition of Sub-MBAs; standard plant cleanouts; and, bimonthly inventory estimates. Process monitoring capabilities are also being installed to provide independent operational procedural compliance verification, process anomaly detection, and enhanced materials traceability. Development of a sensitivity analysis approach to defining process measurement requirements is in progress

  7. Methodology for performing measurements to release material from radiological control

    International Nuclear Information System (INIS)

    Durham, J.S.; Gardner, D.L.

    1993-09-01

    This report describes the existing and proposed methodologies for performing measurements of contamination prior to releasing material for uncontrolled use at the Hanford Site. The technical basis for the proposed methodology, a modification to the existing contamination survey protocol, is also described. The modified methodology, which includes a large-area swipe followed by a statistical survey, can be used to survey material that is unlikely to be contaminated for release to controlled and uncontrolled areas. The material evaluation procedure that is used to determine the likelihood of contamination is also described

  8. The contribution of material control to meeting performance requirements

    International Nuclear Information System (INIS)

    Rivers, J.D.

    1989-01-01

    The U.S. Dept. of Energy (DOE) is in the process of implementing a set of performance requirements for material control and accountability (MC ampersand A). These graded requirements set a uniform level of performance for similar materials at various facilities with respect to the threat of an insider adversary stealing special nuclear material (SNM). These requirements are phrased in terms of detecting the theft of a goal quantity of SNM within a specified time period and with a probability greater than or equal to a specified value and include defense in-depth requirements

  9. The nuclear materials control system: Safeguards - circa 1957

    International Nuclear Information System (INIS)

    Thomas, C.C. Jr.

    1992-01-01

    In the late 1950s, the Westinghouse Electric Corporation undertook a nuclear materials control study for the Division of International Affairs of the US Atomic Energy Commission (AEC). The objective of the study was to develop a Nuclear Materials Control System (NMCS) that could be used under the US bilateral agreements or by the International Atomic Energy Agency. Phase I was a system study to determine the requirements for an NMCS for an assumed nuclear fuel complex. This paper summarizes aspects of Phase I studies addressing facility types, measurement points, and instrumentation needs and Phase II studies covering chemistry/chemical engineering, nuclear, special devices, and security devices and techniques. 1 fig

  10. Analytical quality control service programme, intercomparison runs, certified reference materials, reference materials 1987-88

    International Nuclear Information System (INIS)

    1986-12-01

    The purpose of the Analytical Quality Control Services (AQCS) programme provided by the IAEA, is to assist laboratories engaged in the analysis of nuclear, environmental, biological, and materials of marine origin for radionuclide, major, minor and trace elements, as well as stable isotopes using atomic and nuclear analytical techniques, to check the quality of their work. The tables give details of the intercomparison samples and reference materials distributed by the IAEA in the period 1987 to 1988. 2 tabs

  11. Survey procedure: Control and accountability of nuclear materials

    International Nuclear Information System (INIS)

    Van Ness, H.

    1987-02-01

    This procedure outlines the method by which the Department of Energy (DOE) San Francisco Operations Office (SAN) will plan and execute periodic field surveys of the Material Control and Accountability (MC and A) program and practices at designated contractors' facilities. The surveys will be conducted in accordance with DOE Order 5630.7, Control and Accountability of Nuclear Materials Surveys (7/8/81) to ascertain compliance with applicable DOE Orders and SAN Management Directives in the 5630 series, as well as the adequacy of the contractor's program and procedures. Surveys will be conducted by the Safeguards and Security Division of DOE-SAN. The survey team will review and evaluate the adequacy of the contractor's procedures and practices for nuclear material control and accounting by means of physical inventory, internal control, measurement and statistics, material control indicators, records and reports, and personnel training. The survey will include an audit of records and reports, observation of inventory procedures, an independent test of the inventory and a review and evaluation of the inventory differences, accidental losses, and normal operational losses as applicable to the facility to be surveyed

  12. Resource Leveling Based on Backward Controlling Activity in Line of Balance

    Directory of Open Access Journals (Sweden)

    Lihui Zhang

    2017-01-01

    Full Text Available The line of balance method that provides continuous and uninterrupted use of resources is one of the best methods for repetitive project resource management. This paper develops a resource leveling algorithm based on the backward controlling activity in line of balance. The backward controlling activity is a kind of special activity, and if its duration is prolonged the project duration could be reduced. It brings two advantages to the resource leveling: both the resource allocated on the backward activity and the project duration are reduced. A resource leveling algorithm is presented which permits the number of crews of the backward controlling activity to be reduced until the terminal situation is reached, where the backward controlling activity does not exist or the number of crews cannot be reduced. That adjustment enables the productivity of all activities to be consistent. An illustrative pipeline project demonstrates the improvement in resource leveling. And this study designed a MATLAB program to execute the design algorithm. The proposed model could help practitioners to achieve the goals of both resource leveling and project duration reduction without increasing any resource.

  13. Genetic resources as initial material for developing new soft winter wheat varieties

    Directory of Open Access Journals (Sweden)

    В. М. Кір’ян

    2016-12-01

    Full Text Available Purpose. To estimate genetic resources collection of soft winter wheat plants (new collection accessions of Ustymivka Experimental Station for Plant Production and select initial material for breeding of adaptive, productive and qualitative soft winter wheat varieties. Methods. Field experiment, laboratory testing. Results. The authors pre- sented results of study of over 1000 samples of gene pool of soft winter wheat from 25 countries during 2001–2005 in Ustymivka Experimental Station for Plant Production of Plant Production Institute nd. a. V. Ya. Yuriev, NAAS of Ukraine for a complex of economic traits. More than 400 new sources with high adaptive properties were selected that combine traits of high productivity and high quality of grain, early ripening, resistance to biotic and abiotic fac- tors (the assessment of samples for 16 valuable traits is given. The selected material comes from various agro-cli- matic zones, including zones of unsustainable agriculture. Conclusions. Recommended sources of traits that have breeding value will allow to enrich high-quality assortment of wheat and considerably accelerate breeding process du- ring development of new soft winter wheat varieties.

  14. Episodic encoding in normal aging: attentional resources hypothesis extended to musical material.

    Science.gov (United States)

    Blanchet, Sophie; Belleville, Sylvie; Peretz, Isabelle

    2006-01-01

    The goal of the present study was to examine age-related changes in musical episodic memory for novel tunes. This was conducted by manipulating the encoding condition in a recognition paradigm. After receiving memory instructions (intentional condition), older and younger participants obtained equivalent hits. In contrast, when intentional encoding was accompanied by a dancing judgment (dancing + intentional condition), the recognition performance of the older persons was severely impaired. Impaired recognition was also found when participants only judged the excerpts without being instructed to memorize them (dancing judgment condition). Although older participants demonstrated a preserved ability to perform the dancing judgment on its own, this ability was not optimal and likely precluded the initiation of more elaborate encoding strategies. These results suggest that asking older persons to divide their attention in the study phase reduces the quality of their musical encoding. Given this extension to musical material, we discuss the notion that the age-related attentional resource decline appears to be domain-general rather than specific to verbal material.

  15. An accountancy system for nuclear materials control in research centres

    International Nuclear Information System (INIS)

    Buttler, R.; Bueker, H.; Vallee, J.

    1979-01-01

    The Nuclear Accountancy and Control System (NACS) was developed at KFA Juelich in accordance with the requirements of the Non-Proliferation Treaty. The main features are (1) recording of nuclear material in inventory items. These are combined to form batches wherever suitable; (2) extrapolation of accounting data as a replacement for detailed measurement of inventory items data. Recording and control of nuclear material are carried out on two levels with access to a common data bank. The lower level deals with nuclear materials handling plus internal management while on the upper level there is a central control point which is responsible for nuclear safeguarding within the entire research centre. By keeping the organizational and technical infrastructure it was possible to develop a system which is both economical and operator-oriented. In this system the emphasis of nuclear safeguarding is placed on the acquisition of the nuclear material inventory. As much consideration has been given to the interests of the various operational levels and organizational units as to internal and national regulations. Since it is part of the safeguarding and control system, access to the NACS must be restricted to a limited number of users only. Furthermore, it must include facilities for manual control in the form of records. Authorization for access must correspond with the various tasks of different user groups. All necessary data are acquired decentrally in the organizational units and entered via a terminal. It is available to the user groups on both levels through a central data bank. To meet all requirements, the NACS has been designed as an integrated, computer-assisted information system for the automated processing of extensive and multi-level nuclear materials data. As part of the preventive measures entailed with nuclear safeguarding, the accountancy system enables the operator of a nuclear plant to furnish proof of non-diversion of nuclear material. (author)

  16. Nondestructive assay technology and automated ''real-time'' materials control

    International Nuclear Information System (INIS)

    Keepin, G.R.

    1977-01-01

    Significant advances in nondestructive assay techniques and instrumentation now enable rapid, accurate and direct in-plant measurement of nuclear material on a continuous or ''real-time'' basis as it progresses through a nuclear facility. A variety of passive and active assay instruments are required for the broad range of materials measurement problems encountered by safeguards inspectors and facility operators in various types of nuclear plants. Representative NDA techniques and instruments are presented and reviewed with special attention to their assay capabilities and areas of applicability in the nuclear fuel cycle. An advanced system of materials control - called ''DYMAC'', for Dynamic Materials Control - is presently under development by the U.S. Energy Research and Development Administration; the DYMAC program integrates new nondestructive assay instrumentation and modern data-processing methods, with the overall objective of demonstrating a workable, cost-effective system of stringent safeguards and materials control in various generic types of facilities found in the nuclear fuel cycle. Throughout the program, emphasis will be placed on devloping practical solutions to generic measurement problems so that resulting techniques and instrumentation will have widespread utility. Projected levels of safeguards assurance, together with other vital - and cost-sensitive - plant operational factors such as process and quality control, criticality safety and waste management are examined in an evaluation of the impact of future advanced materials control systems on overall plant operations, efficiency and productivity. The task of implementing effective and stringent safeguards includes the transfer of new safeguards technology to the nuclear industry. Clearly the training of inspectors (both IAEA and national), plant people, etc., in the effective use of new NDA equipment is of paramount importance; thus in the United States, the Energy Research and Development

  17. Material control and accounting requirements for uranium enrichment facilities

    International Nuclear Information System (INIS)

    Ting, P.

    1991-01-01

    This paper reports that the U.S. Nuclear Regulatory Commission has defined material control and accounting (MC and A) requirement for low-enriched uranium enrichment plants licensed under 10 CFR parts 40 and 70. Following detailed assessment of potential safeguards issues relevant to these facilities, a new MC and A rule was developed. The primary safeguards considerations are detection of the loss of special nuclear material, detection of clandestine production of special nuclear material of low strategic significance for unauthorized use or distribution, and detection of unauthorized production of uranium enriched to ≥10 wt % U-235. The primary safeguards concerns identified were the large absolute limit of error associated with the material balance closing, the inability to shutdown some uranium enrichment technologies to perform a cleanout inventory of the process system, and the flexibility of some of these technologies to produce higher enrichments. Unauthorized production scenarios were identified for some technologies that could circumvent the detection of the production and removal of 5 kilograms of U-235 as high-enriched uranium through conventional material control and accounting programs. Safeguards techniques, including the use of production and process control information, measurements, and technical surveillance, were identified to compensate for these concerns

  18. Nanostructured Solar Irradiation Control Materials for Solar Energy Conversion

    Science.gov (United States)

    Kang, Jinho; Marshall, I. A.; Torrico, M. N.; Taylor, C. R.; Ely, Jeffry; Henderson, Angel Z.; Kim, J.-W.; Sauti, G.; Gibbons, L. J.; Park, C.; hide

    2012-01-01

    Tailoring the solar absorptivity (alpha(sub s)) and thermal emissivity (epsilon(sub T)) of materials constitutes an innovative approach to solar energy control and energy conversion. Numerous ceramic and metallic materials are currently available for solar absorbance/thermal emittance control. However, conventional metal oxides and dielectric/metal/dielectric multi-coatings have limited utility due to residual shear stresses resulting from the different coefficient of thermal expansion of the layered materials. This research presents an alternate approach based on nanoparticle-filled polymers to afford mechanically durable solar-absorptive and thermally-emissive polymer nanocomposites. The alpha(sub s) and epsilon(sub T) were measured with various nano inclusions, such as carbon nanophase particles (CNPs), at different concentrations. Research has shown that adding only 5 wt% CNPs increased the alpha(sub s) and epsilon(sub T) by a factor of about 47 and 2, respectively, compared to the pristine polymer. The effect of solar irradiation control of the nanocomposite on solar energy conversion was studied. The solar irradiation control coatings increased the power generation of solar thermoelectric cells by more than 380% compared to that of a control power cell without solar irradiation control coatings.

  19. Antimicrobial Materials for Advanced Microbial Control in Spacecraft Water Systems

    Science.gov (United States)

    Birmele, Michele; Caro, Janicce; Newsham, Gerard; Roberts, Michael; Morford, Megan; Wheeler, Ray

    2012-01-01

    Microbial detection, identification, and control are essential for the maintenance and preservation of spacecraft water systems. Requirements set by NASA put limitations on the energy, mass, materials, noise, cost, and crew time that can be devoted to microbial control. Efforts are being made to attain real-time detection and identification of microbial contamination in microgravity environments. Research for evaluating technologies for capability enhancement on-orbit is currently focused on the use of adenosine triphosphate (ATP) analysis for detection purposes and polymerase chain reaction (peR) for microbial identification. Additional research is being conducted on how to control for microbial contamination on a continual basis. Existing microbial control methods in spacecraft utilize iodine or ionic silver biocides, physical disinfection, and point-of-use sterilization filters. Although these methods are effective, they require re-dosing due to loss of efficacy, have low human toxicity thresholds, produce poor taste, and consume valuable mass and crew time. Thus, alternative methods for microbial control are needed. This project also explores ultraviolet light-emitting diodes (UV-LEDs), surface passivation methods for maintaining residual biocide levels, and several antimicrobial materials aimed at improving current microbial control techniques, as well as addressing other materials presently under analysis and future directions to be pursued.

  20. Phase change thermal control materials, method and apparatus

    Science.gov (United States)

    Buckley, Theresa M. (Inventor)

    2001-01-01

    An apparatus and method for metabolic cooling and insulation of a user in a cold environment. In its preferred embodiment the apparatus is a highly flexible composite material having a flexible matrix containing a phase change thermal storage material. The apparatus can be made to heat or cool the body or to act as a thermal buffer to protect the wearer from changing environmental conditions. The apparatus may also include an external thermal insulation layer and/or an internal thermal control layer to regulate the rate of heat exchange between the composite and the skin of the wearer. Other embodiments of the apparatus also provide 1) a path for evaporation or direct absorption of perspiration from the skin of the wearer for improved comfort and thermal control, 2) heat conductive pathways within the material for thermal equalization, 3) surface treatments for improved absorption or rejection of heat by the material, and 4) means for quickly regenerating the thermal storage capacity for reuse of the material. Applications of the composite materials are also described which take advantage of the composite's thermal characteristics. The examples described include a diver's wet suit, ski boot liners, thermal socks, gloves and a face mask for cold weather activities, and a metabolic heating or cooling blanket useful for treating hypothermia or fever patients in a medical setting and therapeutic heating or cooling orthopedic joint supports.

  1. The regulations concerning the uses of international controlled materials

    International Nuclear Information System (INIS)

    1981-01-01

    This rule is established under the provisions of the law concerning the regulation of nuclear raw materials, nuclear fuel materials and nuclear reactors and the ordinance for the execution of this law and to enforce them. Basic terms are defined, such as material delivery and receipt area, stock fluctuation, batch, real inventory, effective value, fuel assembly and main measuring point. The application for the permission of using internationally regulated goods shall list the kinds of the goods classifying into materials and facilities for each partner country of international agreements concerning these goods. When such goods are utilized by fabricators, persons who install reactors, reprocessors or users, they shall file application to the Director General of the Science and Technology Agency for each works or enterprise where these goods are employed. The application shall include names and addresses, the names and places of works or enterprises where the goods are used, the kinds and quantities of the goods and expected period of usage etc. Records shall be made on the items specified for refiners, fabricators, persons who install reactors and users, respectively, and kept for particular periods. Measurement control, analysis method and business rules are defined. Reports shall be submitted to the Director General on the receipt and delivery, control, and stock fluctuation of nuclear raw materials and fuel materials, etc. (Okada, K.)

  2. System analysis for material control and accountancy technology

    International Nuclear Information System (INIS)

    Persiani, P.J.; Daly, T.A.; Bucher, R.G.; Rothman, A.B.; Cha, B.C.; Trevorrow, L.E.; Seefeldt, W.B.

    1987-01-01

    The systems analysis for material control and accountancy technology (SAMCAT) program involves a working group structured to ensure that direct operating measurements, accountancy experience, and knowledge of the processes and flows of nuclear material in the total US Department of Energy (DOE) complex of production fuel cycles would be the major bases for developing and implementing a plan of action. This working group consists of facility operators, DOE Office of Safeguards Security headquarters and field offices, and government laboratories. The program focus is to develop a system for decision support in validating the material control and accountancy (MC ampersand A) aspects of the masters safeguards and security agreements effectiveness and in evaluating proposed MC ampersand A upgrades. This paper is a status report on the current capabilities of the system

  3. Safeguards research: assessing material control and accounting systems

    International Nuclear Information System (INIS)

    Maimoni, A.

    1977-01-01

    The Laboratory is working for the Nuclear Regulatory Commission to improve the safeguarding of special nuclear material at nuclear fuel processing facilities, to provide a basis for improved regulations for material control and accounting systems, and to develop an assessment procedure for verifying compliance with these regulations. Early work included setting up a hierarchy of safeguard objectives and a set of measurable parameters with which systems performance to meet those objectives can be measured. Present work has focused on developing a computerized assessment procedure. We have also completed a test bed (based on a plutonium nitrate storage area) to identify and correct problems in the procedure and to show how this procedure can be used to evaluate the performance of an applicant's material control and accounting system

  4. Y2K experiences in the nuclear material control area

    International Nuclear Information System (INIS)

    Yagi, T.; Suzuki, T.

    1999-01-01

    Though the Y2K problem was treated by each organization, it became systematic in Japan when Advanced Information and Telecommunication Society Promotion Head-quarters was established recognizing the importance and urgency of the issue. The summary of the action and some experiences concerning Y2K issues in the nuclear materials control area are presented

  5. Human performance: An essential element in materials control and accountability

    International Nuclear Information System (INIS)

    Haber, S.B.; Allentuck, J.

    1996-01-01

    The importance of the role of human performance in the successful and effective operation of many activities throughout many industries has been well documented. Most closely related to the materials control and accountability area is the work in human factors that has been ongoing in the U.S. nuclear industry since the Three Mile Island Nuclear Power Plant accident in 1979. Research related to the role of human reliability, human-system interface, and organization and management influences has been and is still being conducted to identify ways to enhance the safe and effective operation of nuclear facilities. This paper will discuss these human performance areas and how they relate to the materials control and accountability area. Particular attention will be focussed on the notion of open-quotes safety cultureclose quotes and how it can be defined and measured for understanding the values and attitudes held by individuals working in the materials control area. It is widely believed that the culture of an organization, which reflects the expectations and values of the management of an organization, is a key element to the operation of that organization. The human performance element is one which has not received a great deal of consideration in the materials control and accountability area and yet it will be demonstrated that it is an essential component to ensure the success of safeguards activities

  6. The management of radioactive materials and its control

    International Nuclear Information System (INIS)

    Flory, D.; Charles, T.

    1998-01-01

    The present work is destined to present the arrangements taken by users of radioactive materials to follow them and to manage them efficiency; it takes stock of the different control systems that work towards checking the efficiency of these arrangements. Some particular cases are evoked relative to nuclear facilities. (N.C.)

  7. Systems analysis for materials control and accountancy technology

    International Nuclear Information System (INIS)

    Daly, T.A.; Bucher, R.G.; Rothman, A.B.; Charak, I.; Persiani, P.J.

    1987-01-01

    The objective is to upgrade Materials Control and Accountancy (MCandA) technology over the flows of special nuclear materials throughout the DOE complex of fuel cycles. The program focus is to develop a ''Management Tool'' for decision support in evaluating MCandA upgrades, and invalidating the MCandA aspects of the Master Safeguards and Security Agreements (MSSA) effectiveness. The approach is the computerization of the nuclear materials flow charts, identification of key measurement locations in the production and product fuel cycle, and construct data information processing at each measurement location. The program is to provide the Office of Safeguards and Security (OSS) with a timely management decision support system in planning MCandA safeguards technology upgrades over the nuclear materials production and product cycles

  8. Thermotropic and Thermochromic Polymer Based Materials for Adaptive Solar Control

    Directory of Open Access Journals (Sweden)

    Olaf Mühling

    2010-12-01

    Full Text Available The aim of this review is to present the actual status of development in adaptive solar control by use of thermotropic and organic thermochromic materials. Such materials are suitable for application in smart windows. In detail polymer blends, hydrogels, resins, and thermoplastic films with a reversible temperature-dependent switching behavior are described. A comparative evaluation of the concepts for these energy efficient materials is given as well. Furthermore, the change of strategy from ordinary shadow systems to intrinsic solar energy reflection materials based on phase transition components and a first remark about their realization is reported. Own current results concerning extruded films and high thermally stable casting resins with thermotropic properties make a significant contribution to this field.

  9. Radar coordination and resource management in a distributed sensor network using emergent control

    Science.gov (United States)

    Weir, B. S.; Sokol, T. M.

    2009-05-01

    As the list of anti-air warfare and ballistic missile defense missions grows, there is an increasing need to coordinate and optimize usage of radar resources across the netted force. Early attempts at this optimization involved top-down control mechanisms whereby sensors accept resource tasking orders from networked tracking elements. These approaches rely heavily on uncertain knowledge of sensor constraints and capabilities. Furthermore, advanced sensor systems may support self-defense missions of the host platform and are therefore unable to relinquish control to an external function. To surmount these issues, the use of bottom-up emergent control techniques is proposed. The information necessary to make quality, network-wide resource allocations is readily available to sensor nodes with access to a netted track picture. By assessing resource priorities relative to the network (versus local) track picture, sensors can understand the contribution of their resources to the netted force. This allows the sensors to apply resources where most needed and remove waste. Furthermore, simple local rules for resource usage, when properly constructed, allow sensors to obtain a globally optimal resource allocation without direct coordination (emergence). These results are robust to partial implementation (i.e., not all nodes upgraded at once) and failures on individual nodes (whether from casualty or reallocation to other sensor missions), and they leave resource control decisions in the hands of the sensor systems instead of an external function. This paper presents independent research and development work on emergent control of sensor resources and the impact to resource allocation and tracking performance.

  10. Radioactive material inventory control at a waste characterization facility

    International Nuclear Information System (INIS)

    Yong, L.K.; Chapman, J.A.; Schultz, F.J.

    1996-01-01

    Due to the recent introduction of more stringent Department of Energy (DOE) regulations and requirements pertaining to nuclear and criticality safety, the control of radioactive material inventory has emerged as an important facet of operations at DOE nuclear facilities. In order to comply with nuclear safety regulations and nuclear criticality requirements, radioactive material inventories at each nuclear facility have to be maintained below limits specified for the facility in its safety authorization basis documentation. Exceeding these radioactive material limits constitutes a breach of the facility's nuclear and criticality safety envelope and could potentially result in an accident, cause a shut-down of the facility, and bring about imminent regulatory repercussions. The practice of maintaining control of radioactive material, especially sealed and unsealed sources, is commonplace and widely implemented; however, the requirement to track the entire radioactivity inventory at each nuclear facility for the purpose of ensuring nuclear safety is a new development. To meet the new requirements, the Applied Radiation Measurements Department at Oak Ridge National Laboratory (ORNL) has developed an information system, called the open-quotes Radioactive Material Inventory Systemclose quotes (RMIS), to track the radioactive material inventory at an ORNL facility, the Waste Examination and Assay Facility (WEAF). The operations at WEAF, which revolve around the nondestructive assay and nondestructive examination of waste and related research and development activities, results in an ever-changing radioactive material inventory. Waste packages and radioactive sources are constantly being brought in or taken out of the facility; hence, use of the RMIS is necessary to ensure that the radioactive material inventory limits are not exceeded

  11. Renewable resources in industry. Industrial use of agricultural and wood raw materials in Germany. 3. compl. rev. ed.

    Energy Technology Data Exchange (ETDEWEB)

    Peters, Dietmar

    2010-11-17

    The ''Action Plan for the Industrial Use of Renewable Resources'' that was adopted by the German Federal Government in 2009 is an important impulse for promoting the industrial use of renewable resources parallel to their use for energy generation. The Action Plan sets forth a broad vision, not only for a significant and sustainable increase in the proportion of biomass used in industry but also for an improvement in the efficiency of biomass use in ensuring Germany's raw material supplies while taking into account the objectives and requirements of sustainability strategies. It also aims to secure and advance Germany's role as an international leader in the industrial use of renewable resources. This brochure provides an overview of the possible industrial uses of renewable resources in Germany and illustrates the important role that agricultural raw materials and wood already play in today's industry. (orig.)

  12. Renewable resources in industry. Industrial use of agricultural and wood raw materials in Germany. 3. compl. rev. ed.

    Energy Technology Data Exchange (ETDEWEB)

    Peters, Dietmar

    2010-11-17

    The ''Action Plan for the Industrial Use of Renewable Resources'' that was adopted by the German Federal Government in 2009 is an important impulse for promoting the industrial use of renewable resources parallel to their use for energy generation. The Action Plan sets forth a broad vision, not only for a significant and sustainable increase in the proportion of biomass used in industry but also for an improvement in the efficiency of biomass use in ensuring Germany's raw material supplies while taking into account the objectives and requirements of sustainability strategies. It also aims to secure and advance Germany's role as an international leader in the industrial use of renewable resources. This brochure provides an overview of the possible industrial uses of renewable resources in Germany and illustrates the important role that agricultural raw materials and wood already play in today's industry. (orig.)

  13. FERLENT - a controlled release fertilizer produced from a polymer material

    International Nuclear Information System (INIS)

    Gonzalez, Mayra; Arces, Milagros; Cuesta, Ernesto; Corredera, Pilar; Sardina, Carmen; Rieumont, Jacques; Quintana, Patricia; Bartolo, Pascual; Guenther, Bluma

    2011-01-01

    The possibility to use release controlled fertilizers in the agriculture of the tropical countries is more important than in the agriculture of the countries of the template regions. In this context, this work purpose the development of a new Fertilizer of Controlled Release named FERLENT, which was obtained starting from a polymeric material, under controlled conditions which allowed to corroborate the adjustment of the synthesis parameters under the modulate of nutrients liberation. It was characterized by, Scanning Microscopy Electron (SEM), Thermogravimetric analysis (TGA), Nuclear Magnetic Resonance (NMR) and infrared spectroscopy (FTIR). (author)

  14. The algorithms for control of heating massive material

    Directory of Open Access Journals (Sweden)

    Karol Kostúr

    2008-03-01

    Full Text Available In numerous technological processes a change on the output follows change on the input pending specific time. This time is called dead time and if this time is too large, it causes problems in the control. This contribution is aimed at analyzing the algorithms of discreet regulation of the systems with dead time. Verified were classical PID regulator and a regulator using Dead Beat method. The control was also tried with Dead interval method. The regulators were tested by simulation and in the electrical laboratory furnace. The task was to control the temperature inside the material heated by furnace power.

  15. Control of radioactive materials on the medical science campus

    International Nuclear Information System (INIS)

    Thompson, C.H.; Vandergrift, J.F.; Slayden, S.A.; Dalrymple, G.V.

    1977-01-01

    There are persistent and difficult control problems associated with the large scale use of radionuclides: nowhere are these more apparent than in a large university medical center. If a safe environment is to be maintained with respect to employees, students, patients, and the general public, a program must be devised for effective supervision and control of radioactive sources. An automated system has been developed for the inventory and control of radioactive materials that has proven a valuable asset in a large institution. The reports generated have assisted in making responsible judgements, as well as assuring the continuation of single licensure for the medical science campus. (author)

  16. INTRODUCTION OF THE PRINCIPLES OF A SUSTAINABLE DEVELOPMENT PRODUCTION OF BIODEGRADABLE PACKING FROM SECONDARY MATERIAL RESOURCES OF FOOD PRODUCTIONS

    Directory of Open Access Journals (Sweden)

    S. T. Antipov

    2014-01-01

    Full Text Available Summary. For increase of profitability of the food enterprises, decrease in an ecological trace from technogenic activity of the food industry the concept of development of low-waste and waste-free productions considered on the example of technology of receiving a biodegradable packing material from secondary material resources of food productions is offered: beer pellet, beet press, spirit bards, Pancake week press and bone glue. The technology of receiving biodegradable material from secondary material resources of food productions includes itself the following main stages: dehydration, crushing, mixing, leveling, formation, glazing. Advantage of the offered product consists of: - low cost of packing due to use of secondary material resources and full naturalness (now the raw materials for biodegradable packing specially are grown up on technical fields with use of GMO; - full decomposition in nature less than in 6 months according to GOST R 54533-2011 (EN 13432:2000 "Resource-saving. Packing. Requirements, criteria and the scheme of utilization of packing by means of a composting and biological decomposition"; - presence at the compost received at decomposition, the elements promoting increase of fertility of the soil. Application of technology allows reach at the same time three effects of a positive orientation: economic, ecological and social.

  17. A METHOD OF AND A SYSTEM FOR CONTROLLING ACCESS TO A SHARED RESOURCE

    DEFF Research Database (Denmark)

    2006-01-01

    A method and a system of controlling access of data items to a shared resource, wherein the data items each is assigned to one of a plurality of priorities, and wherein, when a predetermined number of data items of a priority have been transmitted to the shared resource, that priority...

  18. The role of implicit affective responses and trait self-control in ego resource management

    NARCIS (Netherlands)

    Buczny, Jacek; Layton, Rebekah L.; Muraven, Mark

    2015-01-01

    Exertion of self-control requires reliance on ego resources. Impaired performance typically results once those resources have been depleted by previous use. Yet the mechanism behind the depletion processes is little understood. Beliefs, motivation, and physiological changes have been implicated, yet

  19. A line of defense approach to fissile material control

    International Nuclear Information System (INIS)

    Holloway, S.P.; Holloway, N.J.

    1995-01-01

    A crucial element of the safety policy of the UK Atomic Weapons Establishment (AWE) is that concerned with the safe control of fissile material in order to minimize the potential for unplanned criticality. The principles by which AWE controls fissile material advocate a simple Line of Defense (LOD) approach to assessing criticality-safety related aspects of fissile operations. An LOD assessment provides a measure of the depth of defense available to prevent general types of criticality accident and can be used to demonstrate compliance with the risk-based Basic Safety Limits (BSLs) and Objectives (BSOs) used by the UK Nuclear Installations Inspectorate (NII) to judge the safety of operations in accordance with its Safety Assessment Principles (SAPs) for Nuclear Plants. This paper discusses the LOD concept, the basis of LOD assessment and describes LODs specific to criticality control

  20. An application of neural networks to process and materials control

    International Nuclear Information System (INIS)

    Howell, J.A.; Whiteson, R.

    1991-01-01

    Process control consists of two basic elements: a model of the process and knowledge of the desired control algorithm. In some cases the level of the control algorithm is merely supervisory, as in an alarm-reporting or anomaly-detection system. If the model of the process is known, then a set of equations may often be solved explicitly to provide the control algorithm. Otherwise, the model has to be discovered through empirical studies. Neural networks have properties that make them useful in this application. They can learn (make internal models from experience or observations). The problem of anomaly detection in materials control systems fits well into this general control framework. To successfully model a process with a neutral network, a good set of observables must be chosen. These observables must in some sense adequately span the space of representable events, so that a signature metric can be built for normal operation. In this way, a non-normal event, one that does not fit within the signature, can be detected. In this paper, we discuss the issues involved in applying a neural network model to anomaly detection in materials control systems. These issues include data selection and representation, network architecture, prediction of events, the use of simulated data, and software tools. 10 refs., 4 figs., 1 tab

  1. 10 CFR 74.31 - Nuclear material control and accounting for special nuclear material of low strategic significance.

    Science.gov (United States)

    2010-01-01

    ... and maintain a measurement system which assures that all quantities in the material accounting records...) In each inventory period, control total material control and accounting measurement uncertainty so... 10 Energy 2 2010-01-01 2010-01-01 false Nuclear material control and accounting for special...

  2. A development of radioactive material tracking and location control system

    International Nuclear Information System (INIS)

    Joo, Gwang Tae; Jung Seung Yong; Song, Jung Ho

    2005-01-01

    As the whole industry fields such as construction, chemistry, machine, medicine including nuclear-related field have extended the range of radioactive material uses, it is tendency that domestic uses of radioactive material have been increased in quantity and number. In addition, as the transportation, transfer and use of radioactive material have been frequent, its loss, robbery, and carelessness of handling may cause not only employees in charge but the public to worry about damage of explosion and put an obstacle to increase trust in nuclear-related industry. At present, though the transportation, use and storage of radioactive material conform to the institution and standard of the atomic energy law, if we tracking radioactive material in real time, we can take immediate actions to prevent its loss, robbery. As our research institute developed a terminal that control location and tracking real time location for gamma-ray projector used in transporting, transferring, and using nondestructive test, we take a good look at utilities by using GPS-Cell ID bases location control

  3. Stimuli-Responsive Materials for Controlled Release Applications

    KAUST Repository

    Li, Song

    2015-04-01

    The controlled release of therapeutics has been one of the major challenges for scientists and engineers during the past three decades. To address this outstanding problem, the design and fabrication of stimuli-responsive materials are pursued to guarantee the controlled release of cargo at a specific time and with an accurate amount. Upon applying different stimuli such as light, magnetic field, heat, pH change, enzymes or redox, functional materials change their physicochemical properties through physical transformation or chemical reactions, allowing the release of payload agents on demand. This dissertation studied three stimuli-responsive membrane systems for controlled release from films of macro sizes to microcapsules of nano sizes. The first membrane system is a polymeric composite film which can decrease and sustain diffusion upon light irradiation. The photo-response of membranes is based on the photoreaction of cinnamic derivatives. The second one is composite membrane which can improve diffusion upon heating. The thermo-response of membranes comes from the volume phase transition ability of hydrogels. The third one is microcapsule which can release encapsulated agents upon light irradiation. The photo-response of capsules results from the photoreaction of nitrobenzyl derivatives. The study on these membrane systems reveals that stimuli-responsive release can be achieved by utilizing different functional materials on either macro or micro level. Based on the abundant family of smart materials, designing and fabricating stimuli-responsive systems shall lead to various advanced release processes on demand for biomedical applications.

  4. Status of control assembly materials in Indian water reactors

    International Nuclear Information System (INIS)

    Date, V.G.; Kulkarni, P.G.

    2000-01-01

    India's present operating water cooled power reactors comprise boiling water reactors of Tarapur Atomic Power Station (TAPS) and pressurized heavy water reactors (PHWRs) at Kota (RAPS), Kalpakkam (MAPS), Narora (NAPS) and Kakrapara (KAPS). Boiling water reactors of TAPS use boron carbide control blades for control of power as well as for shut down (scram). PHWRs use boron steel and cobalt absorber rods for power control and Cd sandwiched shut off rods (primary shut down system) and liquid poison rods (secondary shut down system) for shut down. In TAPS, Gadolinium rods (burnable poison rods) are also incorporated in fuel assembly for flux flattening. Boron carbide control blades and Gadolinium rods for TAPS, cobalt absorber rods and shut down assemblies for PHWRs are fabricated indigenously. Considerable development work was carried out for evolving material specifications, component and assembly drawings, and fabrication processes. Details of various control and shut off assemblies being fabricated currently are highlighted in the paper. (author)

  5. Spoken commands control robot that handles radioactive materials

    International Nuclear Information System (INIS)

    Phelan, P.F.; Keddy, C.; Beugelsdojk, T.J.

    1989-01-01

    Several robotic systems have been developed by Los Alamos National Laboratory to handle radioactive material. Because of safety considerations, the robotic system must be under direct human supervision and interactive control continuously. In this paper, we describe the implementation of a voice-recognition system that permits this control, yet allows the robot to perform complex preprogrammed manipulations without the operator's intervention. To provide better interactive control, we connected to the robot's control computer, a speech synthesis unit, which provides audible feedback to the operator. Thus upon completion of a task or if an emergency arises, an appropriate spoken message can be reported by the control computer. The training programming and operation of this commercially available system are discussed, as are the practical problems encountered during operations

  6. Adaptive prediction model accuracy in the control of residential energy resources

    NARCIS (Netherlands)

    Negenborn, R.R.; Houwing, M.; De Schutter, B.; Hellendoorn, H.

    2008-01-01

    With the increasing use of distributed energy resources and intelligence in the electricity infrastructure, the possibilities for minimizing costs of household energy consumption increase. Technology is moving toward a situation in which automated energy management systems could control domestic

  7. The Effects of Control of Resources on Magnitudes of Sex Differences in Human Mate Preferences

    Directory of Open Access Journals (Sweden)

    Fhionna Moore

    2010-10-01

    Full Text Available We tested the hypothesis that magnitudes of sex differences in human mate preferences would be inversely related to control of resources. Specifically, we predicted that the ideal partner age, maximum and minimum partner ages tolerated and preferences for “physical attractiveness” over “good financial prospects” of female participants would approach parity with that of men with increasing control of resources. In a sample of 3770 participants recruited via an online survey, the magnitudes of sex differences in age preferences increased with resource control whereas the sex difference in preferences for “physical attractiveness” over “good financial prospects” disappeared when resource control was high. Results are inconsistent, and are discussed in the context of adaptive tradeoff and biosocial models of sex differences in human mate preferences.

  8. Nuclear materials control and accountability criteria for upgrades measures

    Energy Technology Data Exchange (ETDEWEB)

    Erkkila, B.H.; Hatcher, C.R.

    1998-11-01

    As a result of major political and societal changes in the past several years, methods of nuclear material control may no longer be as effective as in the past in Russia, the Newly Independent States (NIS), and the Baltic States (BS). The objective of the Department of Energy (DOE) Material Protection, Control, and Accounting Program (MPC and A) is to reduce the threat of nuclear proliferation by collaborating with Russia, NIS, and BS governments to promote western-style MPC and A. This cooperation will improve the MPC and A on all weapons useable nuclear materials and will establish a sustainable infrastructure to provide future support and maintenance for these technology-based improvements. Nuclear materials of proliferation concern include materials of the types and quantities that can be most easily and directly used in a nuclear weapon. Sabotage of nuclear material is an event of great concern and potentially disastrous consequences to both the US and the host country. However, sabotage is currently beyond the scope of program direction and cannot be used to justify US-funded MPC and A upgrades. Judicious MPC and A upgrades designed to protect against insider and outsider theft scenarios would also provide addition, although not comprehensive, protection against saboteurs. This paper provides some suggestions to establish consistency in prioritizing system-enhancement efforts at nuclear material facilities. The suggestions in this paper are consistent with DOE policy and directions and should be used as a supplement to any policy directives issued by NN-40, DOE Russia/NIS Task Force.

  9. Nuclear materials control and accountability criteria for upgrades measures

    International Nuclear Information System (INIS)

    Erkkila, B.H.; Hatcher, C.R.

    1998-01-01

    As a result of major political and societal changes in the past several years, methods of nuclear material control may no longer be as effective as in the past in Russia, the Newly Independent States (NIS), and the Baltic States (BS). The objective of the Department of Energy (DOE) Material Protection, Control, and Accounting Program (MPC and A) is to reduce the threat of nuclear proliferation by collaborating with Russia, NIS, and BS governments to promote western-style MPC and A. This cooperation will improve the MPC and A on all weapons useable nuclear materials and will establish a sustainable infrastructure to provide future support and maintenance for these technology-based improvements. Nuclear materials of proliferation concern include materials of the types and quantities that can be most easily and directly used in a nuclear weapon. Sabotage of nuclear material is an event of great concern and potentially disastrous consequences to both the US and the host country. However, sabotage is currently beyond the scope of program direction and cannot be used to justify US-funded MPC and A upgrades. Judicious MPC and A upgrades designed to protect against insider and outsider theft scenarios would also provide addition, although not comprehensive, protection against saboteurs. This paper provides some suggestions to establish consistency in prioritizing system-enhancement efforts at nuclear material facilities. The suggestions in this paper are consistent with DOE policy and directions and should be used as a supplement to any policy directives issued by NN-40, DOE Russia/NIS Task Force

  10. 77 FR 72868 - The Centers for Disease Control (CDC)/Health Resources and Services Administration (HRSA...

    Science.gov (United States)

    2012-12-06

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention The Centers for Disease Control (CDC)/Health Resources and Services Administration (HRSA) Advisory Committee on HIV, Viral... announcements of meetings and other committee management activities, for both the Centers for Disease Control...

  11. Cancer in Angola, resources and strategy for its control | Lopes | Pan ...

    African Journals Online (AJOL)

    According Angola epidemiological data, results of interviews and international published advocacy for cancer control we develop a potential strategy for its control. The objectives are to identify existing resources for cancer control and describe the needs thereto, in order to establish an oncological program to guide the ...

  12. Nuclear material control and accounting safeguards in the United States

    International Nuclear Information System (INIS)

    Woltermann, H.A.; Rudy, C.R.; Rakel, D.A.; DeVer, E.A.

    1982-01-01

    Material control and accounting (MC and A) of special nuclear material (SNM) must supplement physical security to protect SNM from unlawful use such as terrorist activities. This article reviews MC and A safeguards of SNM in the United States. The following topics are covered: a brief perspective and history of MC and A safeguards, current MC and A practices, measurement methods for SNM, historical MC and A performance, a description of near-real-time MC and A systems, and conclusions on the status of MC and A in the United States

  13. Methodologies for nuclear material accounting and control: challenges and expectations

    International Nuclear Information System (INIS)

    Ramakumar, K.L.

    2007-01-01

    Nuclear Material Accounting and Control (NUMAC) represents one of the most important and indispensable responsibilities of any nuclear installation. The emphasis is to ensure that the nuclear material being handled in the nuclear installation is properly accounted for with the expected accuracy and confidence levels. A number of analytical methods based on both destructive and non-destructive assay techniques are available at the disposal of the nuclear analytical scientists for this purpose and they have been enumerated extensively in literature. Instead of recounting the analytical methodologies available, an attempt has been made in this paper to highlight some of the challenges. (author)

  14. Controlling Beryllium Contaminated Material And Equipment For The Building 9201-5 Legacy Material Disposition Project

    International Nuclear Information System (INIS)

    Reynolds, T.D.; Easterling, S.D.

    2010-01-01

    This position paper addresses the management of beryllium contamination on legacy waste. The goal of the beryllium management program is to protect human health and the environment by preventing the release of beryllium through controlling surface contamination. Studies have shown by controlling beryllium surface contamination, potential airborne contamination is reduced or eliminated. Although there are areas in Building 9201-5 that are contaminated with radioactive materials and mercury, only beryllium contamination is addressed in this management plan. The overall goal of this initiative is the compliant packaging and disposal of beryllium waste from the 9201-5 Legacy Material Removal (LMR) Project to ensure that beryllium surface contamination and any potential airborne release of beryllium is controlled to levels as low as practicable in accordance with 10 CFR 850.25.

  15. Composite materials pipings: selection of basic materials and manufacturing process, quality control during manufacture

    International Nuclear Information System (INIS)

    Pays, M.F.

    1997-01-01

    The purpose of the paper is to present a summary of the knowledge acquired at the R and D on resins used as composite matrix, the resistance to hydrolysis and mechanical strength of pipings made from these materials, and on quality control during manufacture. The initial targets concerning the material selection, industrial manufacturing and quality control procedures are presented. The paper describes the results obtained concerning the investigation of the damage produced by hydrolysis in polyesters, vinyl esters and epoxides, the influence of temperature, reinforcement and the mechanical characterization of the tubing manufacturing. The performances of the nondestructive testings (radiography, ultrasonic controls, differential interferometry and infrared thermography) used are also reported. The paper ends with a further research and testings programme. (author)

  16. Environmental sustainability control by water resources carrying capacity concept: application significance in Indonesia

    Science.gov (United States)

    Djuwansyah, M. R.

    2018-02-01

    This paper reviews the use of Water Resources carrying capacity concept to control environmental sustainability with the particular note for the case in Indonesia. Carrying capacity is a capability measure of an environment or an area to support human and the other lives as well as their activities in a sustainable manner. Recurrently water-related hazards and environmental problems indicate that the environments are exploited over its carrying capacity. Environmental carrying capacity (ECC) assessment includes Land and Water Carrying Capacity analysis of an area, suggested to always refer to the dimension of the related watershed as an incorporated hydrologic unit on the basis of resources availability estimation. Many countries use this measure to forecast the future sustainability of regional development based on water availability. Direct water Resource Carrying Capacity (WRCC) assessment involves population number determination together with their activities could be supported by available water, whereas indirect WRCC assessment comprises the analysis of supply-demand balance status of water. Water resource limits primarily environmental carrying capacity rather than the land resource since land capability constraints are easier. WRCC is a crucial factor known to control land and water resource utilization, particularly in a growing densely populated area. Even though capability of water resources is relatively perpetual, the utilization pattern of these resources may change by socio-economic and cultural technology level of the users, because of which WRCC should be evaluated periodically to maintain usage sustainability of water resource and environment.

  17. Control of Nuclear Material in Republic of Croatia

    International Nuclear Information System (INIS)

    Cizmek, A.; Medakovic, S.; Prah, M.; Novosel, N.

    2008-01-01

    State Office for Nuclear Safety (SONS) is established based on 'Nuclear Safety Act' (Official Gazette No. 173/2003) as an independent state organization responsible for all questions in connection with safe use of nuclear energy and technology, for expert matters of preparedness in the case of nuclear emergency, as well as for international co-operation in these fields (regulatory body). In the second half of year 2006, stationary detection systems for nuclear and other radioactive materials were installed on Border Crossing Bregana, Croatia. Yantar 2U, which is the commercial name of the system, is integrated automatic system capable of detection of nuclear and other radioactive materials prepared for fixed-site customs applications (Russian origin). Installed system contains portal monitors, camera, communication lines and communication boxes and server. Two fully functional separate systems has been installed on BC Bregana, one on truck entrance and another one on car entrance. In this article the operational experience of installed system is presented. This includes statistical analysis of recorded alarms, evaluation of procedures for operational stuff and maintenance and typical malfunction experience, as well as some of the recommendation for future use of detection systems. Ordinance on the control of nuclear material and special equipment (Official Gazette No. 15/08) lays down the list of nuclear materials and special equipment as well as the list of other activities related to the production of special equipment and non-nuclear materials; the contents of the declaration of intent form for export/import of goods, the form for notifying export/import of goods, the form for notifying transport of nuclear material, the form for notifying the activity related to producing of special equipment and non-nuclear material, as well as of the form of the report on nuclear material balance in the user's material balance area. This Ordinance lays down the method of

  18. Review of material recovery from used electric and electronic equipment-alternative options for resource conservation.

    Science.gov (United States)

    Friege, Henning

    2012-09-01

    For waste from electric and electronic equipment, the WEEE Directive stipulates the separate collection of electric and electronic waste. As to new electric and electronic devices, the Restriction of Hazardous Substances (RoHS) Directive bans the use of certain chemicals dangerous for man and environment. From the implementation of the WEEE directive, many unsolved problems have been documented: poor collection success, emission of dangerous substances during collection and recycling, irretrievable loss of valuable metals among others. As to RoHS, data from the literature show a satisfying success. The problems identified in the process can be reduced to some basic dilemmas at the borders between waste management, product policy and chemical safety. The objectives of the WEEE Directive and the specific targets for use and recycling of appliances are not consistent. There is no focus on scarce resources. Extended producer responsibility is not sufficient to guarantee sustainable waste management. Waste management reaches its limits due to problems of implementation but also due to physical laws. A holistic approach is necessary looking at all branch points and sinks in the stream of used products and waste from electric and electronic equipment. This may be done with respect to the general rules for sustainable management of material streams covering the three dimensions of sustainable policy. The relationships between the players in the field of electric and electronic devices have to be taken into account. Most of the problems identified in the implementation process will not be solved by the current amendment of the WEEE Directive.

  19. Hazardous materials management and control program at Oak Ridge National Laboratory - environmental protection

    International Nuclear Information System (INIS)

    Eisenhower, B.M.; Oakes, T.W.

    1982-01-01

    In the Federal Register of May 19, 1980, the US Environmental Protection Agency promulgated final hazardous waste regulations according to the Resource Conservation and Recovery Act (RCRA) of 1976. The major substantive portions of these regulations went into effect on November 19, 1980, and established a federal program to provide comprehensive regulation of hazardous waste from its generation to its disposal. In an effort to comply with these regulations, a Hazardous Materials Management and Control Program was established at Oak Ridge National Laboratory. The program is administered by two Hazardous Materials Coordinators, who together with various support groups, ensure that all hazardous materials and wastes are handled in such a manner that all personnel, the general public, and the environment are adequately protected

  20. Safeguarding nuclear materials in the former Soviet Republics through computerized materials protection, control and accountability

    International Nuclear Information System (INIS)

    Roumiantsev, A.N.; Ostroumov, Y.A.; Whiteson, R.; Seitz, S.L.; Landry, R.P.; Martinez, B.J.; Boor, M.G.; Anderson, L.K.; Gary, S.P.

    1997-01-01

    The threat of nuclear weapons proliferation is a problem of global concern. International efforts at nonproliferation focus on preventing acquisition of weapons-grade nuclear materials by unauthorized states, organizations, or individuals. Nonproliferation can best be accomplished through international cooperation in the application of advanced science and technology to the management and control of nuclear materials. Computerized systems for nuclear material protection, control, and accountability (MPC and A) are a vital component of integrated nuclear safeguards programs. This paper describes the progress of scientists in the United States and former Soviet Republics in creating customized, computerized MPC and A systems. The authors discuss implementation of the Core Material Accountability System (CoreMAS), which was developed at Los Alamos National Laboratory by the US Department of Energy and incorporates, in condensed and integrated form, the most valuable experience gained by US nuclear enterprises in accounting for and controlling nuclear materials. The CoreMAS approach and corresponding software package have been made available to sites internationally. CoreMAS provides methods to evaluate their existing systems and to examine advantages and disadvantages of customizing CoreMAS or improving their own existing systems. The sites can also address crucial issues of software assurance, data security, and system performance; compare operational experiences at sites with functioning computerized systems; and reasonably evaluate future efforts. The goal of the CoreMAS project is to introduce facilities at sites all over the world to modern international MPC and A practices and to help them implement effective, modern, computerized MPC and A systems to account for their nuclear materials, and thus reduce the likelihood of theft or diversion. Sites are assisted with MPC and A concepts and the implementation of an effective computerized MPC and A system

  1. Controlling collective dynamics in complex minority-game resource-allocation systems

    Science.gov (United States)

    Zhang, Ji-Qiang; Huang, Zi-Gang; Dong, Jia-Qi; Huang, Liang; Lai, Ying-Cheng

    2013-05-01

    Resource allocation takes place in various kinds of real-world complex systems, such as traffic systems, social services institutions or organizations, or even ecosystems. The fundamental principle underlying complex resource-allocation dynamics is Boolean interactions associated with minority games, as resources are generally limited and agents tend to choose the least used resource based on available information. A common but harmful dynamical behavior in resource-allocation systems is herding, where there are time intervals during which a large majority of the agents compete for a few resources, leaving many other resources unused. Accompanying the herd behavior is thus strong fluctuations with time in the number of resources being used. In this paper, we articulate and establish that an intuitive control strategy, namely pinning control, is effective at harnessing the herding dynamics. In particular, by fixing the choices of resources for a few agents while leaving the majority of the agents free, herding can be eliminated completely. Our investigation is systematic in that we consider random and targeted pinning and a variety of network topologies, and we carry out a comprehensive analysis in the framework of mean-field theory to understand the working of control. The basic philosophy is then that, when a few agents waive their freedom to choose resources by receiving sufficient incentives, the majority of the agents benefit in that they will make fair, efficient, and effective use of the available resources. Our work represents a basic and general framework to address the fundamental issue of fluctuations in complex dynamical systems with significant applications to social, economical, and political systems.

  2. Impact of water control projects on fisheries resources in Bangladesh

    Science.gov (United States)

    Mirza, Monirul Qader; Ericksen, Neil J.

    1996-07-01

    Bangladesh is a very flat delta built up by the Ganges—Brahmaputra—Meghna/Barak river systems. Because of its geographical location, floods cause huge destruction of lives and properties almost every year. Water control programs have been undertaken to enhance development through mitigating the threat of disasters. This structural approach to flood hazard has severely affected floodplain fisheries that supply the major share of protein to rural Bangladesh, as exemplified by the Chandpur Irrigation Project. Although the regulated environment of the Chandpur project has become favorable for closed-water cultured fish farming, the natural open-water fishery loss has been substantial. Results from research show that fish yields were better under preproject conditions. Under project conditions per capita fish consumption has dropped significantly, and the price of fish has risen beyond the means of the poor people, so that fish protein in the diet of poor people is gradually declining. Bangladesh is planning to expand water control facilities to the remaining flood-prone areas in the next 15 20 years. This will cause further loss of floodplain fisheries. If prices for closed-water fish remain beyond the buying power of the poor, alternative sources of cheap protein will be required.

  3. Fluoropolymer materials and architectures prepared by controlled radical polymerizations

    DEFF Research Database (Denmark)

    Hansen, Natanya Majbritt Louie; Jankova Atanasova, Katja; Hvilsted, Søren

    2007-01-01

    This review initially summarizes the mechanisms, merits and limitations of the three controlled radical polymerizations: nitroxide mediated polymerization (NMP), atom transfer radical polymerization (ATRP) or metal catalyzed living radical polymerization, and reversible addition–fragmentation chain...... transfer (RAFT) polymerization. This is followed by two parts, one dealing with homo- and copolymerizations of fluorinated methacrylates and acrylates, and a second where fluorinated styrenes, alone or in combination with other monomers, are the main issues. In these parts, initiators (including...... properties and functionalities that can be obtained from these novel fluorinated materials and architectures are especially emphasized. Thus, various amphiphilic, biocompatible or low energy materials, fluorinated nanoparticles and nanoporous films/membranes as well as materials for submicron and nanolevel...

  4. BIODEGRABILITY OF BIOPLASTIC MATERIALS IN A CONTROLLED COMPOSTING ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Magdalena Daria Vaverková

    2015-06-01

    Full Text Available The objective of this study was to determine the biodegradability of bioplastic materials – sponge cloths – available on the European market that are labeled as 100% biodegradable but not certified as compostable. The test was carried out in a controlled composting environment. The project length was 22 weeks. The emphasis was put on discovering whether the sponge cloths are biodegradable or not. Based on the results thereof it can be concluded that sponge cloths have not decomposed completely but their color has changed and that degradation and physical changes occurred. Samples A1, and A2 have not decomposed completely and exhibited very slow degradation rate. Sample B5 exhibited the highest degradation rate. Samples B3, B4 exhibited high degree of decomposition. The main conclusion from this study is that biodegradation of bioplastics materials strongly depends on both the environment in which they are placed and the chemical nature of the material.

  5. Competent authority regulatory control of the transport of radioactive material

    International Nuclear Information System (INIS)

    1987-04-01

    The purpose of this guide is to assist competent authorities in regulating the transport of radioactive materials and to assist users of transport regulations in their interactions with competent authorities. The guide should assist specifically those countries which are establishing their regulatory framework and further assist countries with established procedures to harmonize their application and implementation of the IAEA Regulations. This guide specifically covers various aspects of the competent authority implementation of the IAEA Regulations for the Safe Transport of Radioactive Material. In addition, physical protection and safeguards control of the transport of nuclear materials as well as third party liability aspects are briefly discussed. This is because they have to be taken into account in overall transport regulatory activities, especially when establishing the regulatory framework

  6. Transcending sovereignty. In the management and control of nuclear material

    International Nuclear Information System (INIS)

    Scheinman, Lawrence

    2001-01-01

    Effective control of nuclear material is fundamentally important to the credibility and reliability of the nuclear non-proliferation regime. Under the Treaty on the Non-Proliferation of Nuclear Weapons (NPT), international safeguards are applied to non-nuclear- weapon State Parties for the purpose of verifying compliance with their undertakings not to seek to acquire nuclear weapons or explosive devices by assuring that safeguarded nuclear activities and material are not diverted from their intended peaceful use. Reflecting the sovereign State basis upon which the international system rests, the control and protection of nuclear materials within the State are the responsibility of the national authority. This division of responsibility between international verification of non-diversion on the one hand and national responsibility for material protection on the other has worked quite well over time. But it has not created a seamless web of fully effective control over nuclear material. 34 In so far as safeguards are concerned, six points are to be made: 1. INFCIRC/153 Agreements: Completion by all NPT Parties of the required safeguards agreements with the IAEA. Fifty States Party to the NPT still have not entered into treaty-obligated safeguards agreements with the IAEA. 2. Adherence by all States having full-scope safeguards INFCIRC/540. As noted, very few States have thus far negotiated and implemented the strengthened safeguards arrangements. 3. United Nations Security Council action to take its 1992 assertions (related to compliance and enforcement) on proliferation and safeguards a step further. 4. Non-NPT Party support for international Safeguards. 5. Safeguards financing. 6. IAEA Access to export license information

  7. Nuclear materials control and accountability internal audit program

    International Nuclear Information System (INIS)

    Barham, M.A.; Abbott, R.R.

    1991-01-01

    This paper reports that the Department of Energy Order (DOE) 5633.3, Control and Accountability for Nuclear Materials, includes several requirements for development and implementation of an internal audit program. Martin Marietta Energy System, Inc., manages five sites in Tennessee, Kentucky, and Ohio for the DOE Field Office, Oak Ridge and has a Central Nuclear Materials Control and Accountability (NMC and A) Manager with matrixed responsibility for the NMC and A program at the five sites. The Energy Systems Central NMC and A Manager has developed an NMC and A Internal Audit Handbook which defines the functional responsibilities, performance criteria, and reporting and documentation requirements for the Energy Systems NMC and A Internal Audit Program. The initial work to develop and implement these standards was tested at the K-25 Site when the site hired an internal auditor to meet the DOE requirements for an NMC and A Internal Audit program

  8. Material control and accounting at Exxon Nuclear, II

    International Nuclear Information System (INIS)

    Schneider, R.A.

    1985-01-01

    In this session the measurements and the associated measurement control program used at the Model Plant are described. The procedures for evaluating MUF and sigma MUF are also discussed. The use of material composition codes and their role in IAEA safeguards under the US/IAEA Safeguards Agreement are described. In addition, the various accounting forms used at the plant are described and the use of tamper-indicating seals is discussed

  9. Methods of Verification, Accountability and Control of Special Nuclear Material

    International Nuclear Information System (INIS)

    Stewart, J.E.

    1999-01-01

    This session demonstrates nondestructive assay (NDA) measurement, surveillance and analysis technology required to protect, control and account (MPC and A) for special nuclear materials (SNM) in sealed containers. These measurements, observations and analyses comprise state-of-the art, strengthened, SNM safeguards systems. Staff member specialists, actively involved in research, development, training and implementation worldwide, will present six NDA verification systems and two software tools for integration and analysis of facility MPC and A data

  10. Robotic control architecture development for automated nuclear material handling systems

    International Nuclear Information System (INIS)

    Merrill, R.D.; Hurd, R.; Couture, S.; Wilhelmsen, K.

    1995-02-01

    Lawrence Livermore National Laboratory (LLNL) is engaged in developing automated systems for handling materials for mixed waste treatment, nuclear pyrochemical processing, and weapon components disassembly. In support of these application areas there is an extensive robotic development program. This paper will describe the portion of this effort at LLNL devoted to control system architecture development, and review two applications currently being implemented which incorporate these technologies

  11. Determination of internationally controlled materials according to provisions of the law for the regulations of nuclear source materials, nuclear fuel materials and reactors

    International Nuclear Information System (INIS)

    1977-01-01

    According to the provisions of The Law, those stipulated as internationally controlled materials are nuclear source materials, nuclear fuel materials, moderating materials, reactors and facilities, transferred from such as the U.S.A., the U.K. and Canada on the agreements of peaceful uses of atomic energy, and nuclear fuel materials accruing therefrom. (Mori, K.)

  12. Geological control in computer-based resource estimation

    International Nuclear Information System (INIS)

    Cram, A.A.

    1992-01-01

    The economic assessment of mineral deposits potentially involves a number of phases from initial assessment through to detailed orebody evaluation and subsequently to estimation of bench or stope grades in an operational mine. Obviously the nature and quantity of information varies significantly from one extreme to the other. This paper reports on geological interpretation which obviously plays a major part during the early phases of assessment and it logically follows that computerized orebody assessment techniques must be able to effectively utilize this information. Even in an operational mine the importance of geological control varies according to the type of orebody. The method of modelling coal seams is distinctly different from those techniques used for a massive sulphide deposit. For coal seams significant reliance is placed on the correlation of seam intercepts from holes which are widely spaced in relation to the seam (i.e.) orebody) thickness. The use of geological interpretation in this case is justified other experience gained in the past, compared to the cost of reliance only on samples from a very dense drill hole pattern

  13. Effective algorithm for solving complex problems of production control and of material flows control of industrial enterprise

    Science.gov (United States)

    Mezentsev, Yu A.; Baranova, N. V.

    2018-05-01

    A universal economical and mathematical model designed for determination of optimal strategies for managing subsystems (components of subsystems) of production and logistics of enterprises is considered. Declared universality allows taking into account on the system level both production components, including limitations on the ways of converting raw materials and components into sold goods, as well as resource and logical restrictions on input and output material flows. The presented model and generated control problems are developed within the framework of the unified approach that allows one to implement logical conditions of any complexity and to define corresponding formal optimization tasks. Conceptual meaning of used criteria and limitations are explained. The belonging of the generated tasks of the mixed programming with the class of NP is shown. An approximate polynomial algorithm for solving the posed optimization tasks for mixed programming of real dimension with high computational complexity is proposed. Results of testing the algorithm on the tasks in a wide range of dimensions are presented.

  14. Materialism.

    Science.gov (United States)

    Melnyk, Andrew

    2012-05-01

    Materialism is nearly universally assumed by cognitive scientists. Intuitively, materialism says that a person's mental states are nothing over and above his or her material states, while dualism denies this. Philosophers have introduced concepts (e.g., realization and supervenience) to assist in formulating the theses of materialism and dualism with more precision, and distinguished among importantly different versions of each view (e.g., eliminative materialism, substance dualism, and emergentism). They have also clarified the logic of arguments that use empirical findings to support materialism. Finally, they have devised various objections to materialism, objections that therefore serve also as arguments for dualism. These objections typically center around two features of mental states that materialism has had trouble in accommodating. The first feature is intentionality, the property of representing, or being about, objects, properties, and states of affairs external to the mental states. The second feature is phenomenal consciousness, the property possessed by many mental states of there being something it is like for the subject of the mental state to be in that mental state. WIREs Cogn Sci 2012, 3:281-292. doi: 10.1002/wcs.1174 For further resources related to this article, please visit the WIREs website. Copyright © 2012 John Wiley & Sons, Ltd.

  15. A theory of economic growth with material/energy resources and dematerialization: interaction of three growth mechanisms

    NARCIS (Netherlands)

    Ayes, R.U.; van den Bergh, J.C.J.M.

    2005-01-01

    The nature of energy and material resources in a non-optimizing growth theory framework is clarified. This involves two modifications of the conventional theory. Firstly, multiple feedback mechanisms or "growth engines" are identified, such that the impact of the cost of production through demand on

  16. Material flow cost accounting as a tool for improved resource efficiency in the hotel sector: A case of emerging market

    Directory of Open Access Journals (Sweden)

    Celani John Nyide

    2016-12-01

    Full Text Available Material Flow Cost Accounting (MFCA is one of the Environmental Management Accounting (EMA tools that has been developed to enable environmentally and economically efficient material usage and thus improve resource efficiency. However, the use of this tool to improve resource efficiency in the South African hotel sector remains unknown. An exploratory study, qualitative in nature, was conducted using a single case study with embedded units approach. A Hotel Management Group that met the selection criteria formed part of this study. In-depth interviews were conducted with 10 participants and additional documents were analysed. The investigated hotels have developed technologies that provide an environmental account in both physical and monetary units which constitute the use of MFCA to improve resource efficiencies. However, the study established a number of factors that affect the implementation of MFCA by the hotel sector in a South African context

  17. Cultural Resource Investigation for the Materials and Fuels Complex Wastewater System Upgrade at the Idaho National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Brenda R. Pace; Julie B raun Williams; Hollie Gilbert; Dino Lowrey; Julie Brizzee

    2010-05-01

    The Materials and Fuels Complex (MFC) located in Bingham County at the Idaho National Laboratory (INL) in southeastern Idaho is considering several alternatives to upgrade wastewater systems to meet future needs at the facility. In April and May of 2010, the INL Cultural Resource Management Office conducted archival searches, archaeological field surveys, and coordination with the Shoshone-Bannock Tribes to identify cultural resources that may be adversely affected by the proposed construction and to provide recommendations to protect any resources listed or eligible for listing on the National Register of Historic Places. These investigations showed that one National Register-eligible archaeological site is located on the boundary of the area of potential effects for the wastewater upgrade. This report outlines protective measures to help ensure that this resource is not adversely affected by construction.

  18. Control of tritium permeation through fusion reactor strucural materials

    International Nuclear Information System (INIS)

    Maroni, V.A.

    1978-01-01

    The intention of this paper is to provide a brief synopsis of the status of understanding and technology pertaining to the dissolution and permeation of tritium in fusion reactor materials. The following sections of this paper attempt to develop a simple perspective for understanding the consequences of these phenomena and the nature of the technical methodology being contemplated to control their impact on fusion reactor operation. Considered in order are: (1) the occurrence of tritium in the fusion fuel cycle, (2) a set of tentative criteria to guide the analysis of tritium containment and control strategies, (3) the basic mechanisms by which tritium may be released from a fusion plant, and (4) the methods currently under development to control the permeation-related release mechanisms. To provide background and support for these considerations, existing solubility and permeation data for the hydrogen isotopes are compared and correlated under conditions to be expected in fusion reactor systems

  19. Nuclear material control and accountancy in a radiochemical plant

    International Nuclear Information System (INIS)

    Crawford, J. M.

    1999-01-01

    The measurement systems in use at Savannah River Site, SRS, to determine material balance around dissolution of fuel, separation and purification of actinides to a nitrate product are described. To ensure that volume accuracy's are as expected, SRS has implemented a volumetric measurement control program to control errors and to detect anomalies. The program consists of periodic instrument calibrations, comparison of in-tank density measurements. An analytical quality control program is in place at SRS to provide assurance that analysis are reliable and to estimate and monitor method performance. Checks include the analysis of standard prior to the use of each method each shift the method is used. At SRS cumulative inventory difference is compared to the combined errors for the balance. The results from current evaluations for uranium and plutonium balances are presented [ru

  20. Litter Control, Waste Management, and Recycling Resource Unit, K-6. Bulletin 1722.

    Science.gov (United States)

    Louisiana State Dept. of Education, Baton Rouge.

    This unit provides elementary teachers with ideas for assisting their students in developing an understanding and appreciation of sound resource use. It contains projects and activities that focus on both the litter problem and on waste management solutions. These materials can be adapted and modified to accommodate different grade levels and…

  1. Control and accountancy of nuclear materials in a uranium enrichment plant

    International Nuclear Information System (INIS)

    Hurt, N.H.

    1985-01-01

    A nuclear material control and accountancy system has been developed by Goodyear Atomic Corporation to meet safeguards and security requirements. It comprises three major elements: physical security, nuclear material control, and nuclear material accounting. This safeguards system is called Dynamic Material Control and Accountancy System (DYMCAS). The system approaches real-time computer control on a transaction-by-transaction basis

  2. Day-Ahead Scheduling Considering Demand Response as a Frequency Control Resource

    Directory of Open Access Journals (Sweden)

    Yu-Qing Bao

    2017-01-01

    Full Text Available The development of advanced metering technologies makes demand response (DR able to provide fast response services, e.g., primary frequency control. It is recognized that DR can contribute to the primary frequency control like thermal generators. This paper proposes a day-ahead scheduling method that considers DR as a frequency control resource, so that the DR resources can be dispatched properly with other resources. In the proposed method, the objective of frequency control is realized by defining a frequency limit equation under a supposed contingency. The frequency response model is used to model the dynamics of system frequency. The nonlinear frequency limit equation is transformed to a linear arithmetic equation by piecewise linearization, so that the problem can be solved by mixed integer linear programming (MILP. Finally, the proposed method is verified on numerical examples.

  3. A new neutron absorber material for criticality control

    International Nuclear Information System (INIS)

    Wells, Alan H.

    2007-01-01

    A new neutron absorber material based on a nickel metal matrix composite has been developed for applications such as the Transport, Aging, and Disposal (TAD) canister for the Yucca Mountain Project. This new material offers superior corrosion resistance to withstand the more demanding geochemical environments found in a 300,000 year to a million year repository. The lifetime of the TAD canister is currently limited to 10,000 years, reflecting the focus of current regulations embodied in 10 CFR 63. The use of DOE-owned nickel stocks from decommissioned enrichment facilities could reduce the cost compared to stainless steel/boron alloy. The metal matrix composite allows the inclusion of more than one neutron absorber compound, so that the exact composition may be adjusted as needed. The new neutron absorber material may also be used for supplementary criticality control of stored or transported PWR spent fuel by forming it into cylindrical pellets that can be inserted into a surrogate control rod. (authors)

  4. Investigation of thermal management materials for automotive electronic control units

    International Nuclear Information System (INIS)

    Mallik, Sabuj; Ekere, Ndy; Best, Chris; Bhatti, Raj

    2011-01-01

    Today's electronics packages are smaller and more powerful than ever before. This leads to ever increasing thermal challenges for the systems designer. The automotive electronic control unit (ECU) package faces the same challenge of thermal management as the industry in general. This is coupled with the latest European Union legislation (Euro 6 standard) which forced the ECU manufacturers to completely re-design their ECU platform with improved hardware and software capability. This will result in increased power densities and therefore, the ability to dissipate heat will be a key factor. A higher thermal conductivity (TC) material for the ECU housing (than the currently used Aluminium) could improve heat dissipation from the ECU. This paper critically reviews the state-of-the-art in thermal management materials which may be applicable to an automotive ECU. This review shows that of the different materials currently available, the Al/SiC composites in particular have very good potential for automotive ECU application. In terms of metal composites processing, the liquid metal infiltration process is recommended as it has a lower processing cost and it also has the ability to produce near net-shape materials.

  5. Distributed Control and Management of Renewable Electric Energy Resources for Future Grid Requirements

    DEFF Research Database (Denmark)

    Mokhtari, Ghassem; Anvari-Moghaddam, Amjad; Nourbakhsh, Ghavameddin

    2016-01-01

    strategy is a promising approach to manage and utilise the resources in future distribution networks to effectively deal with grid electric quality issues and requirements. Jointly, utility and customers the owners of the resources in the network are considered as part of a practical coordination strategy......It is anticipated that both medium- and low-voltage distribution networks will include high level of distributed renewable energy resources, in the future. The high penetration of these resources inevitably can introduce various power quality issues, including; overvoltage and overloading....... This book chapter provides the current research state of the art concepts and techniques in dealing with these potential issues. The methods provided in this chapter are based on distributed control approach, tailored and suitable particularly for the future distribution composition. The distributed control...

  6. A modelling and control structure for product quality control in climate-controlled processing of agro-material

    NARCIS (Netherlands)

    Verdijck, G.J.C.; Straten, van G.

    2002-01-01

    In this paper a modelling and control structure for product quality control is presented for a class of operations that processes agro-material. This class can be characterised as climate-controlled operations, such as storage, transport and drying. The basic model consists of three parts. These are

  7. A design methodology for materials control and accounting information systems

    International Nuclear Information System (INIS)

    Helman, P.; Strittmatter, R.B.

    1987-01-01

    Modern approaches to nuclear materials safeguards have significantly increased the data processing needs of safeguards information systems. Implementing these approaches will require developing efficient, cost-effective designs. Guided by database design research, we are developing a design methodology for distributed materials control and accounting (MCandA) information systems. The methodology considers four design parameters: network topology, allocation of data to nodes, high-level global processing strategy, and local file structures to optimize system performance. Characteristics of system performance that are optimized are response time for an operation, timeliness of data, validity of data, and reliability. The ultimate goal of the research is to develop a comprehensive computerized design tool specifically tailored to the design of MCandA systems

  8. Material control system design: Test Bed Nitrate Storage Area (TBNSA)

    International Nuclear Information System (INIS)

    Clark, G.A.; Da Roza, R.A.; Dunn, D.R.; Sacks, I.J.; Harrison, W.; Huebel, J.G.; Ross, W.N.; Salisbury, J.D.; Sanborn, R.H.; Weissenberger, S.

    1978-05-01

    This report provides an example of a hypothetical Special Nuclear Material (SNM) Safeguard Material Control and Accounting (MC and A) System which will be used as a subject for the demonstration of the Lawrence Livermore Laboratory MC and A System Evaluation Methodology in January 1978. This methodology is to become a tool in the NRC evaluation of license applicant submittals for Nuclear Fuel Cycle facilities. The starting point for this test bed design was the Allied-General Nuclear Services--Barnwell Nuclear Fuel Plant Reprocessing plant as described in the Final Safety Analysis Report (FSAR), of August 1975. The test bed design effort was limited to providing an SNM safeguard system for the plutonium nitrate storage area of this facility

  9. Additive Manufacturing: Multi Material Processing and Part Quality Control

    DEFF Research Database (Denmark)

    Pedersen, David Bue

    This Ph.D dissertation,ffAdditive Manufacturing: Multi Material Processing and Part Quality Controlff, deal with Additive Manufacturing technologies which is a common name for a series of processes that are recognized by being computer controlled, highly automated, and manufacture objects...... by a layered deposition of material. Two areas of particular interest is addressed. They are rooted in two very different areas, yet is intended to fuel the same goal. To help Additive Manufacturing technologies one step closer to becoming the autonomous, digital manufacturing method of tomorrow. Vision...... systems A paradox exist in the field of Additive Manufacturing. The technologies allow for close-to unrestrained and integral geometrical freedom. Almost any geometry can be manufactured fast, e"ciently and cheap. Something that has been missing fundamental capability since the entering of the industrial...

  10. Request Stream Control for the Access to Broadband Multimedia Educational Resources in the Distance Learning System

    Directory of Open Access Journals (Sweden)

    Irina Pavlovna Bolodurina

    2013-10-01

    Full Text Available This article presents a model of queuing system for broadband multimedia educational resources, as well as a model of access to a hybrid cloud system storage. These models are used to enhance the efficiency of computing resources in a distance learning system. An additional OpenStack control module has been developed to achieve the distribution of request streams and balance the load between cloud nodes.

  11. Product Control of Waste Products with New Coating Materials

    International Nuclear Information System (INIS)

    Krumbach, H.; Steinmetz, H.J.; Odoj, R.; Wartenberg, W.; Grunau, H.

    2009-01-01

    In Germany, with the shaft KONRAD a repository for low radioactive waste will be available at the earliest in the year 2013. The previously conditioned radioactive waste has to be suitable for a longer-term interim storage. They have to be treated in a way that they are chemically stable and that their integrity is guaranteed for a long time. That is why the waste product or the container is covered/ coated for special waste such as hygroscopic waste or waste that includes aluminium. The Product Control Group for radioactive waste (PKS) has to proof the suitability of the so-treated waste for the repository KONRAD on behalf of the Federal Office for Radiation Protection (BfS). This has to be done before the delivering. In this context the PKS also assesses the suitability of new coating materials for low radioactive waste products or containers and their correct technical application. The characteristics and the technical application of polyurethane coatings as well as the control of the so-coated waste for the disposal in the shaft KONRAD are described in this poster. The Poster shows the development stages of the coating and the filling. There are also shown the boundary conditions and the investigations of the Product Control Group for the use of the new coating material for radioactive waste. (authors)

  12. Dose control in road transport of radioactive material

    International Nuclear Information System (INIS)

    Gerulis, Eduardo

    2013-01-01

    The radiation doses to workers in the transport of radioactive material should be as low as reasonably achievable. The average doses of drivers and loaders, sampled in this thesis should be decreased. The demonstration of doses control in a road vehicle with radioactive material required by the current Brazilian regulation, CNEN NE 5.01 should be written in its own printed form with exposure values obtained in normally occupied positions from workers and members of the public, even when the consignment does not need 'exclusive use' (⅀IT ≤50). Through bibliographic research, modeling and field research, this research work shows that this demonstration of the control should be done by writing the registration accumulation of load, limited (⅀IT ≤50), also in the own printed form. It is for a better control method, in order to avoid the use of measuring equipment, to build standardization with foreign regulations, to the current occupational doses of radioprotection technicians, the costs and time, (important for consignment with radiopharmaceuticals short half-life) would be all smaller. Exposure values of the parameters used with this method are smaller than regulatory limits. The segregation distances between loads and the cabins of vehicles shall be showed by Brazilian regulation updated to contribute to these aims. (author)

  13. Applications of Kalman Filtering to nuclear material control

    International Nuclear Information System (INIS)

    Pike, D.H.; Morrison, G.W.; Westley, G.W.

    1977-10-01

    The feasibility of using modern state estimation techniques (specifically Kalman Filtering and Linear Smoothing) to detect losses of material from material balance areas is evaluated. It is shown that state estimation techniques are not only feasible but in most situations are superior to existing methods of analysis. The various techniques compared include Kalman Filtering, linear smoothing, standard control charts, and average cumulative summation (CUSUM) charts. Analysis results indicated that the standard control chart is the least effective method for detecting regularly occurring losses. An improvement in the detection capability over the standard control chart can be realized by use of the CUSUM chart. Even more sensitivity in the ability to detect losses can be realized by use of the Kalman Filter and the linear smoother. It was found that the error-covariance matrix can be used to establish limits of error for state estimates. It is shown that state estimation techniques represent a feasible and desirable method of theft detection. The technique is usually more sensitive than the CUSUM chart in detecting losses. One kind of loss which is difficult to detect using state estimation techniques is a single isolated loss. State estimation procedures are predicated on dynamic models and are well-suited for detecting losses which occur regularly over several accounting periods. A single isolated loss does not conform to this basic assumption and is more difficult to detect

  14. Application of controllable unit approach (CUA) to performance-criterion-based nuclear material control and accounting

    International Nuclear Information System (INIS)

    Foster, K.W.; Rogers, D.R.

    1979-01-01

    The Nuclear Regulatory Commission is considering the use of maximum-loss performance criteria as a means of controlling SNM in nuclear plants. The Controllable Unit Approach to material control and accounting (CUA) was developed by Mound to determine the feasibility of controlling a plant to a performance criterion. The concept was tested with the proposed Anderson, SC, mixed-oxide plant, and it was shown that CUA is indeed a feasible method for controlling a complex process to a performance criterion. The application of CUA to an actual low-enrichment plant to assist the NRC in establishing performance criteria for uranium processes is discussed. 5 refs

  15. Clearance of slightly radioactive material from radiological control in Germany

    International Nuclear Information System (INIS)

    Thierfeldt, S.

    1995-01-01

    Clearance from radiological control of slightly radioactive material arising from operation or decommissioning of nuclear installations has been practiced in Germany for nearly two decades. Meanwhile, for the clearance of metal generally approved and applicable recommendations for clearance levels have been issued. For other materials like building waste, case-by-case decisions are made by the state licensing authorities. Efforts to implement consistent sets of clearance levels for all kinds of material are under way. As several decommissioning projects will soon generate large amounts of materials from dismantling, a solution needs to be reached soon. The legal framework in Germany governing the use of atomic energy consists of the Atomic Energy Act and several ordinances. Rules and guidelines including the recommendations of the German Commission for Radiation Protection (SSK) exist on a lower level and are not legally binding. Several generic studies for the derivation of clearance levels for metals and building debris with alpha, beta, and gamma contamination have been performed on behalf of the Federal Ministry for Environment, Nature Conservation and Nuclear Safety, which oriented themselves on an individual dose of 10 microSv/a in agreement with IAEA recommendations. Stochastic models have been used for establishing the connection between specific activity of the material to be released and the resulting individual doses, with significant advantages over deterministic scenarios. In the future, for new SSK recommendations or an ordinance on clearance, the increase of masses from demolition of installations, higher recycling rates in the conventional sector and harmonization with international regulations and standards have to be taken into account

  16. OSE inspection of materials control and accountability: Review

    International Nuclear Information System (INIS)

    Coady, K.J.

    1987-01-01

    As part of its task to confirm that Department of Energy (DOE) field offices provide levels of security and safeguards commensurate with defined threats, the DOE Office of Security Evaluations (OSE) conducts inspections of the nuclear materials control and accountability (MC and A) systems at DOE facilities throughout the United States. Inspections are based on the DOE Safeguards and Security Standards and Criteria, tailored to the specific aspects at and threats to each individual site. This paper reviews the process of inspecting MC and A systems during the planning, preinspection, and inspection/reporting phases

  17. Procedure for the assessment of material control and accounting systems

    International Nuclear Information System (INIS)

    Parziale, A.A.; Sacks, I.J.

    1979-01-01

    For the United States Nuclear Regulatory Commission, a procedure was developed and tested for the evaluation of Material Control and Accounting (MC and A) Systems at nuclear fuel facilities. This procedure, called the Structured Assessment Approach, SAA, subjects the MC and A system at a facility to a series of increasingly sophisticated adversaries and strategies. A fully integrated version of the computer codes which assist the analyst in this assessment will become available in October 1979. The concepts of the SAA and the results of the assessment of a hypothetical but typical facility are presented

  18. Hexapartite safeguards project team 3: material accounting and control questionnaire

    International Nuclear Information System (INIS)

    Swindle, D.W. Jr.

    1981-01-01

    Information provided in this report reflects the current design and operating procedures for the GCEP. However, since the installation is currently under construction, facility design and operating procedures discussed in this report are subject to change. Where applicable, the responses are based on material control and accounting practices of the Portsmouth Gaseous Diffusion Plant's (GDP) operating contractor (Goodyear Atomic Corporation). These practices meet US Department of Energy (DOE) standards and are assumed to be the reference practices for the GCEP. This report covers data collection and record keeping actions of the operator

  19. Controlled generation of silver nanocolloid in amorphous silica materials

    International Nuclear Information System (INIS)

    Gil, C.; Garcia-Heras, M.; Carmona, N.; Villages, M. A.

    2004-01-01

    Amorphous silica-based materials bulk and superficially doped with silver nano colloids were prepared. Bulk doped glasses were obtained by conventional melting and doped monolithic slabs by sol-gel. Superficially doped glasses were obtained by ion-exchange and doped coatings by sol-gel. The samples were characterised by TEM and UV-VIS spectrometry. Depending on the composition, the silver incorporation process, and the thermal treatments, several colourings were obtained. By controlling these parameters, metallic silver nano colloids can be generated in the matrices studied. Colloids aggregation and growing up depends on the matrix nature and on the experimental process carried out. (Author) 10 refs

  20. Development of Tailorable Electrically Conductive Thermal Control Material Systems

    Science.gov (United States)

    Deshpande, M. S.; Harada, Y.

    1997-01-01

    The optical characteristics of surfaces on spacecraft are fundamental parameters in controlling its temperature. Passive thermal control coatings with designed solar absorptance and infrared emittance properties have been developed and have been in use for some time. In this total space environment, the coating must be stable and maintain its desired optical properties as well as mechanical properties for the course of the mission lifetime. The mission lifetimes are increasing and in our quest to save weight, newer substrates are being integrated which limit electrical grounding schemes. All of this has added to already existing concerns about spacecraft charging and related spacecraft failures or operational failures. The concern is even greater for thermal control surfaces that are very large. One way of alleviating such concerns is to design new thermal control material systems (TCMS) that can help to mitigate charging via providing charge leakage paths. The objective of this program was to develop two types of passive electrically conductive TCMS. The first was a highly absorbing/emitting black surface and the second was a low (alpha(sub s)/epsilon(sub N)) type white surface. The surface resistance goals for the black absorber was 10(exp 4) to 10(exp 9) Omega/square, and for the white surfaces it was 10(exp 6) to 10(exp 10) Omega/square. Several material system concepts were suggested and evaluated for space environment stability and electrical performance characterization. Our efforts in designing and evaluating these material systems have resulted in several developments. New concepts, pigments and binders have been developed to provide new engineering quality TCMS. Some of these have already found application on space hardware, some are waiting to be recognized by thermal designers, and some require further detailed studies to become state-of-the-art for future space hardware and space structures. Our studies on baseline state-of-the-art materials and

  1. Transactive control: a framework for operating power systems characterized by high penetration of distributed energy resources

    DEFF Research Database (Denmark)

    Hu, Junjie; Yang, Guangya; Kok, Koen

    2016-01-01

    The increasing number of distributed energy resources connected to power systems raises operational challenges for the network operator, such as introducing grid congestion and voltage deviations in the distribution network level, as well as increasing balancing needs at the whole system level......, followed by a literature review and demonstration projects that apply to transactive control. Cases are then presented to illustrate the transactive control framework. At the end, discussions and research directions are presented, for applying transactive control to operating power systems, characterized...

  2. A theory of economic growth with material/energy resources and dematerialization. Interaction of three growth mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    Ayres, Robert U. [Department of Physical Resource Theory, Chalmers Institute, Gothenburg (Sweden); Van den Bergh, Jeroen C.J.M. [Department of Spatial Economics, Faculty of Economics and Business Administration, and Institute for Environmental Studies, Free University, De Boelelaan 1105, Amsterdam 1081 HV (Netherlands)

    2005-10-05

    The nature of energy and material resources in a non-optimizing growth theory framework is clarified. This involves two modifications of the conventional theory. Firstly, multiple feedback mechanisms or 'growth engines' are identified, such that the impact of the cost of production through demand on growth is accounted for. Secondly, a production function distinguishes between resource use, technical efficiency, and value creation. The resulting model is analytically solved under the condition of a constant growth rate. Given model complexity, numerical experiments are performed as well, providing relevant insights to the academic and political debates on 'environmental Kuznets curves' and 'dematerialization.'.

  3. Exploitation and use of raw materials resources for manufacturing nuclear fuels. Present and future

    International Nuclear Information System (INIS)

    Georgescu, Dan; Nica, Dan Bujor; Iuhas, Tiberius; Muntean, Ioan

    2002-01-01

    The nuclear fuel for Cernavoda Romanian nuclear power plant is based on natural uranium cycle implying mining, concentration-refining and UO 2 manufacturing. For the Uranium National Company securing the raw materials necessary for fuel element manufacturing implies the following sources: - from the production cumulated till the year 2001 in the Security and Consumption Stock; - from the current production of uranium ore. Romania posses two categories of deposits which ensure at present and in the future the uranium ore production: active deposits and production center at Crucea-Botusana; - deposits proposed for the exploitation activity at Tulghes - Grinties. Other two important centers of production in Banat and Bihor ceased the production since 1999 due to the deposit depletion. The uranium reserve of Romania is estimated to 9,233 tones in geological deposits of high confidence level plus 6,344 tones in resources still not searched. The medium- and long-term strategy of CNU to fructify the uranium reserves of Romania is in concordance with the current government policy and is based upon two major investments: - opening a new production unit at Tulghes-Grinties; - Refurbishment of plants R1 and E1. The main amount of uranium currently used for making the needed nuclear fuel comes today from the production center Crucea-Botusana. Here the exploitation is based mainly on pitchblende-rich deposits. Uranium ore processing and concentration is made at 'R' and 'E' plants at Feldioara able to ensure an annual capacity of 300 tones UO 2 . In the assesment of the amount of uranium needed in the nuclear fuel fabrication the degree of uranium recovery was also taken into account. The uranium supply implied by the new electro-nuclear plants to be installed till 2025 was evaluated by taking into account the future advanced fuel solutions, SEU and RU, what will diminish the natural uranium consumption to 55% and 66%, respectively. The price of nuclear fuel has been estimated

  4. The importance of material resources and qualified trainers in adult non-formal education and training centres in South Africa

    Science.gov (United States)

    Mayombe, Celestin; Lombard, Antoinette

    2016-04-01

    Non-formal education and training (NFET) programmes in public and private centres in South Africa aim to meet the training needs of adults who have been deprived of formal education which would have fostered skills acquisition and access to employment earlier in their lives. The concern which informs this paper is that adults who face long-term unemployment due to a lack of marketable skills often remain unemployed after completing NFET programmes. The paper assesses the extent to which material and human resources have affected skills acquisition and graduate employment in KwaZulu-Natal, South Africa. The results show that material and human resource challenges in most public and some private centres have led to gaps in skills training. Programmes focus too strongly on academic credits and certificates and not enough on employment as an end goal. The authors argue that the existence of suitable training materials and qualified trainers with practical experience and specific technical skills constitutes favourable conditions ("enabling environments") for graduate employment. Without improvement in material and human resources, adult trainees will continue to experience difficulties integrating into the labour market, and the cycle of poverty and social exclusion will remain unbroken.

  5. Services of radiological protection: as sizing the human and material resources

    International Nuclear Information System (INIS)

    Rueda Guerrero, M. D.; Sierra Perler, I.; Lorenzo Perez, P.

    2014-01-01

    Discussion of radiological protection in the Middle Health has formed a task force to develop a technical document recommendatory to help plan and evaluate resources radiological protection services. (Author)

  6. Control of inhomogeneous materials strength by method of acoustic emission

    Directory of Open Access Journals (Sweden)

    В. В. Носов

    2017-08-01

    Full Text Available The ambiguous connection between the results of acoustic emission control and the strength of materials makes acoustic-emission diagnosis ineffective and actualizes the problem of strength and metrological heterogeneity. Inhomogeneity is some deviation from a certain norm. The real object is always heterogeneous, homogeneity is an assumption that simplifies the image of the object and the solution of the tasks associated with it. The need to consider heterogeneity is due to the need to clarify a particular task and is a transition to a more complex level of research. Accounting for heterogeneity requires the definition of its type, criterion and method of evaluation. The type of heterogeneity depends on the problem being solved and should be related to the property that determines the function of the real object, the criterion should be informative, and the way of its evaluation is non-destructive. The complexity of predicting the behavior of heterogeneous materials necessitates the modeling of the destructive process that determines the operability, the formulation of the inhomogeneity criterion, the interpretation of the Kaiser effect, as showing inhomogeneity of the phenomenon of non-reproduction of acoustic emission (AE activity upon repeated loading of the examined object.The article gives an example of modeling strength and metrological heterogeneity, analyzes and estimates the informative effect of the Kaiser effect on the danger degree of state of diagnosed object from the positions of the micromechanical model of time dependencies of AE parameters recorded during loading of structural materials and technical objects.

  7. Supporting Instruction By Defining Conceptual Relevance Of Materials: Alignment Of Resources To An Earth Systems Framework

    Science.gov (United States)

    Menicucci, A. J.; Bean, J. R.

    2017-12-01

    Environmental, geological, and climatological sciences are important facets of physical science education. However, it is often difficult for educators to acquire the necessary resources to facilitate content explanations, and demonstration of the conceptual links between individual lessons. The Understanding Global Change (UGC) Project at the University of California Museum of Paleontology (UCMP) at UC Berkeley is aligning new and existing Earth systems educational resources that are high-quality, interactive and inquiry based. Learning resources are organized by the UGC framework topics (Causes of Change, How the Earth System Works, and Measurable Changes), and focus on exploring topic relationships. Resources are currently aligned with both the UGC framework and the Next Generation Science Standards (NGSS), facilitating broad utility among K-16 educators. The overarching goal of the UGC Project is to provide the necessary resources that guide the construction of coherent, interdisciplinary instructional units. These units can be reinforced through system models, providing visual learning scaffolds for assessments of student content knowledge. Utilizing the central framework of UGC alleviates the long-standing problem of creating coherent instructional units from multiple learning resources, each organized and categorized independently across multiple platforms that may not provide explicit connections among Earth science subjects UGC topic cross listing of learning modules establishes conceptual links. Each resource is linked across several Earth system components, facilitating exploration of relationships and feedbacks between processes. Cross listed topics are therefore useful for development of broad picture learning goals via targeted instructional units. We also anticipate cultivating summaries of the explicit conceptual links explored in each resource from both current teachers and content specialists. Insructional units currated and aligned under the UGC

  8. Nuclear Material Control and Accountability System Effectiveness Tool (MSET)

    International Nuclear Information System (INIS)

    Powell, Danny H.; Elwood, Robert H. Jr.; Roche, Charles T.; Campbell, Billy J.; Hammond, Glenn A.; Meppen, Bruce W.; Brown, Richard F.

    2011-01-01

    A nuclear material control and accountability (MC and A) system effectiveness tool (MSET) has been developed in the United States for use in evaluating material protection, control, and accountability (MPC and A) systems in nuclear facilities. The project was commissioned by the National Nuclear Security Administration's Office of International Material Protection and Cooperation. MSET was developed by personnel with experience spanning more than six decades in both the U.S. and international nuclear programs and with experience in probabilistic risk assessment (PRA) in the nuclear power industry. MSET offers significant potential benefits for improving nuclear safeguards and security in any nation with a nuclear program. MSET provides a design basis for developing an MC and A system at a nuclear facility that functions to protect against insider theft or diversion of nuclear materials. MSET analyzes the system and identifies several risk importance factors that show where sustainability is essential for optimal performance and where performance degradation has the greatest impact on total system risk. MSET contains five major components: (1) A functional model that shows how to design, build, implement, and operate a robust nuclear MC and A system (2) A fault tree of the operating MC and A system that adapts PRA methodology to analyze system effectiveness and give a relative risk of failure assessment of the system (3) A questionnaire used to document the facility's current MPC and A system (provides data to evaluate the quality of the system and the level of performance of each basic task performed throughout the material balance area (MBA)) (4) A formal process of applying expert judgment to convert the facility questionnaire data into numeric values representing the performance level of each basic event for use in the fault tree risk assessment calculations (5) PRA software that performs the fault tree risk assessment calculations and produces risk importance

  9. Taxonomy for Evaluation of Distributed Control Strategies for Distributed Energy Resources

    DEFF Research Database (Denmark)

    Han, Xue; Heussen, Kai; Gehrke, Oliver

    2017-01-01

    Distributed control strategies applied to power distribution control problems are meant to offer robust and scalable integration of distributed energy resources (DER). However, the term “distributed control” is often loosely applied to a variety of very different control strategies. In particular....... For such comparison, a classification is required that is consistent across the different aspects mentioned above. This paper develops systematic categories of control strategies that accounts for communication, control and physical distribution aspects of the problem, and provides a set of criteria that can...

  10. Systems of accounting for and control of nuclear material

    International Nuclear Information System (INIS)

    1975-01-01

    The implementation of safeguards agreements has always involved governmental organizations to a greater or lesser extent, according to the practices of the State concerned. When the Safeguards Committee 1970 defined the structure and content of agreements required in connection with the Treaty on the Non-Proliferation of Nuclear Weapons, particular attention was paid to the contacts between States and the Agency during the implementation of such agreements. The basic idea was that in each State a national organization would, as far as possible, lay the foundations for international safeguards. Accordingly, NPT safeguards agreements contain the obligation of the State to establish and maintain a 'State's system of accountancy for and control of nuclear material'. The Agency document describing the structure and content of NPT safeguards agreements, INFCIRC/153, also known as the 'Blue Book', lays down the basic requirements for a State's system of accounting for and control of nuclear material - SSAC for short. The same document stipulates that the Agency in its safeguards work should take due account of the technical effectiveness of the SSAC. In practice, the effectiveness of SSACs may differ widely. To take due account of their effectiveness, the Agency has to analyse them, note the elements included in them and the requirements they meet, and consider the particular situations they are designed to cope with

  11. Molten salt oxidation of mixed wastes: Separation of radioactive materials and Resource Conservation and Recovery Act (RCRA) materials

    International Nuclear Information System (INIS)

    Bell, J.T.; Haas, P.A.; Rudolph, J.C.

    1993-01-01

    The Oak Ridge National Laboratory (ORNL) is involved in a program to apply a molten salt oxidation (MSO) process to the treatment of mixed wastes at Oak Ridge and other Department of Energy (DOE) sites. Mixed wastes are defined as those wastes that contain both radioactive components, which are regulated by the atomic energy legislation, and hazardous waste components, which are regulated under the Resource Conservation and Recovery Act (RCRA). A major part of our ORNL program involves the development of separation technologies that are necessary for the complete treatment of mixed wastes. The residues from the MSO treatment of the mixed wastes must be processed further to separate the radioactive components, to concentrate and recycle residues, or to convert the residues into forms acceptable for final disposal. This paper is a review of the MSO requirements for separation technologies, the information now available, and the concepts for our development studies

  12. Biologically inspired autonomous structural materials with controlled toughening and healing

    Science.gov (United States)

    Garcia, Michael E.; Sodano, Henry A.

    2010-04-01

    The field of structural health monitoring (SHM) has made significant contributions in the field of prognosis and damage detection in the past decade. The advantageous use of this technology has not been integrated into operational structures to prevent damage from propagating or to heal injured regions under real time loading conditions. Rather, current systems relay this information to a central processor or human operator, who then determines a course of action such as altering the mission or scheduling repair maintenance. Biological systems exhibit advanced sensory and healing traits that can be applied to the design of material systems. For instance, bone is the major structural component in vertebrates; however, unlike modern structural materials, bone has many properties that make it effective for arresting the propagation of cracks and subsequent healing of the fractured area. The foremost goal for the development of future adaptive structures is to mimic biological systems, similar to bone, such that the material system can detect damage and deploy defensive traits to impede damage from propagating, thus preventing catastrophic failure while in operation. After sensing and stalling the propagation of damage, the structure must then be repaired autonomously using self healing mechanisms motivated by biological systems. Here a novel autonomous system is developed using shape memory polymers (SMPs), that employs an optical fiber network as both a damage detection sensor and a network to deliver stimulus to the damage site initiating adaptation and healing. In the presence of damage the fiber optic fractures allowing a high power laser diode to deposit a controlled level of thermal energy at the fractured sight locally reducing the modulus and blunting the crack tip, which significantly slows the crack growth rate. By applying a pre-induced strain field and utilizing the shape memory recovery effect, thermal energy can be deployed to close the crack and return

  13. National infrastructure for detecting, controlling and monitoring radioactive materials

    International Nuclear Information System (INIS)

    Othman, I.

    2001-01-01

    Full text: The Atomic Energy Commission of Syria (AECS) has the direct responsibility to assure proper safety for handling, accounting for and controlling of nuclear materials and radioactive sources which based on a solid regulatory infrastructure , its elements contains the following items: preventing, responding, training, exchanging of information. Based on the National Law for AECS's Establishment no. 12/1976, a Ministerial Decree for Radiation Safety no. 6514 dated 8.12.1997, issued by the Prime Minister. This Decree authorizes the Syrian Atomic Energy Commission to regulate all kinds of radiation sources. It fulfills the basic requirements of radiation protection and enforce the rules and regulations. The Radiation and Nuclear Regulatory Office (RNRO) is responsible for preparing all the draft regulations. In 1999 the General Regulations for Radiation Protection was issued by the Director General of the AECS, under Decision no. 112/99 dated 3.2.1999. It is based on an IAEA publication, Safety Series no. 115 (1996), and adopted to meet the national requirements. Syria has nine Boarding Centers seeking to prevent unauthorized movement of nuclear material and radioactive sources in and out side the country. They are related to the Atomic Energy Commission (AECS), and are located at the main entrances of the country. Each is provided with the practical tools and equipment in order to assist Radiation Protection Officers (RPO) in fulfilling their commitments, by promoting greater transparency in legal transfers of radioactive materials and devices. They apply complete procedures for the safe import, export and transit of radioactive sources. The RPOs provide authorizations by issuing an entry approval document, after making sure that each concerned shipments has an authorized license from the Syrian Regulatory Body (RNRO) before permitting shipments to leave, arrive or transit across their territory, enabling law enforcement to track the legal movement of

  14. A closer look at cognitive control: Differences in resource allocation during updating, inhibition and switching as revealed by pupillometry

    NARCIS (Netherlands)

    Rondeel, E.W.M.; Steenbergen, H. van; Holland, R.W.; Knippenberg, A.F.M. van

    2015-01-01

    The present study investigated resource allocation, as measured by pupil dilation, in tasks measuring updating (2 Back task), inhibition (Stroop task) and switching (Number Switch task). Because each cognitive control component has unique characteristics, differences in patterns of resource

  15. Availability and Quantity of Human and Material Resources of Nigerian Universities' HIV Youth Friendly Centres: Implication for Policy Implementation

    Directory of Open Access Journals (Sweden)

    A.G. Akintomide

    2017-12-01

    Full Text Available The study assessed the availability and quality of human and material resources at the Campus-based Youth Friendly Centres in Southwestern Nigeria. The survey research design was adopted and the study was carried out among ten counsellors and centre coordinators of Youth Friendly Centres in four higher institutions of learning in Southwest Nigeria using interview guide and observation checklist to collect data. The result revealed that there were no enough counsellors at the YFCs and some of the counsellors available at the centres did not have enough qualification to render HIV counselling. It was also revealed that material resources were moderately available at most of the centres but not up to the require standard stipulated by the World Health Organization.

  16. Regulation on control of nuclear materials of the 31 Oct 1986

    International Nuclear Information System (INIS)

    1986-01-01

    The new regulation on accounting for and control of nuclear materials was issued on 31 October 1986 and put into force on 1 February 1987. The following provisions are included: aim and scope, responsibility for nuclear material accounting and control, rights and obligations of the nuclear material control officer, licensing, facility's instructions for nuclear material control, accounting, records, reporting, unusual events, inspections, nuclear material transfers, exemptions and termination of IAEA safeguards, final provisions, and definitions of terms

  17. International Trade Drives Global Resource Use: A Structural Decomposition Analysis of Raw Material Consumption from 1990-2010.

    Science.gov (United States)

    Plank, Barbara; Eisenmenger, Nina; Schaffartzik, Anke; Wiedenhofer, Dominik

    2018-04-03

    Globalization led to an immense increase of international trade and the emergence of complex global value chains. At the same time, global resource use and pressures on the environment are increasing steadily. With these two processes in parallel, the question arises whether trade contributes positively to resource efficiency, or to the contrary is further driving resource use? In this article, the socioeconomic driving forces of increasing global raw material consumption (RMC) are investigated to assess the role of changing trade relations, extended supply chains and increasing consumption. We apply a structural decomposition analysis of changes in RMC from 1990 to 2010, utilizing the Eora multi-regional input-output (MRIO) model. We find that changes in international trade patterns significantly contributed to an increase of global RMC. Wealthy developed countries play a major role in driving global RMC growth through changes in their trade structures, as they shifted production processes increasingly to less material-efficient input suppliers. Even the dramatic increase in material consumption in the emerging economies has not diminished the role of industrialized countries as drivers of global RMC growth.

  18. Materials control and accountability challenges associated with plutonium inventories

    International Nuclear Information System (INIS)

    Crawford, D.W.

    1996-01-01

    There are currently many initiatives underway within the Department of Energy (DOE) to safely and securely manage large plutonium inventories arising from weapons dismantlement, changing missions and facility operations. Plutonium inventory information is increasingly accessible to the public as a result of the secretary of energy's openness initiative. As a result, knowledge of these inventories and levels to which the department has accounted for and controlled these inventories, will be under increased scrutiny from a variety of interest groups. The quality of this accountability data and what this data means will greatly influence the public's perception of how the US is protecting its plutonium inventories. In addition, the department's safeguards program provides an essential basis for the application of International Atomic Energy Agency (IAEA) safeguards that, in addition to possibly other international control regimes, will be in place over a large portion of these future inventories. The capability and functionality of the department's nuclear safeguards program will be important contributors to the success of US programs for the responsible stewardship of these vast plutonium inventories. This paper discusses some of the challenges, in terms of specific issues relating to one part of the department's safeguards program--materials control and accountability (MC and A)--to meet the growing domestic and international requirements and expectations associated with these plutonium inventories

  19. Materials control and accountability challenges associated with plutonium inventories

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, D.W. [USDOE Office of Safeguards and Security, Washington, DC (United States)

    1996-07-01

    There are currently many initiatives underway within the Department of Energy (DOE) to safely and securely manage large plutonium inventories arising from weapons dismantlement, changing missions and facility operations. Plutonium inventory information is increasingly accessible to the public as a result of the secretary of energy`s openness initiative. As a result, knowledge of these inventories and levels to which the department has accounted for and controlled these inventories, will be under increased scrutiny from a variety of interest groups. The quality of this accountability data and what this data means will greatly influence the public`s perception of how the US is protecting its plutonium inventories. In addition, the department`s safeguards program provides an essential basis for the application of International Atomic Energy Agency (IAEA) safeguards that, in addition to possibly other international control regimes, will be in place over a large portion of these future inventories. The capability and functionality of the department`s nuclear safeguards program will be important contributors to the success of US programs for the responsible stewardship of these vast plutonium inventories. This paper discusses some of the challenges, in terms of specific issues relating to one part of the department`s safeguards program--materials control and accountability (MC and A)--to meet the growing domestic and international requirements and expectations associated with these plutonium inventories.

  20. Analyzing Crime and Crime Control: A Resource Guide. Economics-Political Science Series.

    Science.gov (United States)

    Butterfield, Ruth I.; And Others

    This document, the fourth in a series of resource guides emphasizing economic-political analysis of contemporary public policies and issues, focuses on crime control. Designed as a three-week unit for secondary school students, the guide is presented in three sections. The introduction presents an economic and a political science framework for…

  1. Gender Relations in Access to and Control over Resources in Awra ...

    African Journals Online (AJOL)

    This paper explores gender relations in access to and control over resources in Awra Amba Community of Amhara Region, Ethiopia. The study employed primary and secondary data sources. The primary data were gathered through semistructured interviews with selected community members and key informants, focus ...

  2. Rationalizing Historical successes of malaria control in Africa in terms of mosquito resource availabilty management

    NARCIS (Netherlands)

    Killeen, G.F.; Seyoum, A.; Knols, B.G.J.

    2004-01-01

    Environmental management of mosquito resources is a promising approach with which to control malaria, but it has seen little application in Africa for more than half a century. Here we present a kinetic model of mosquito foraging for aquatic habitats and vertebrate hosts that allows estimation of

  3. Optimum Aggregation and Control of Spatially Distributed Flexible Resources in Smart Grid

    DEFF Research Database (Denmark)

    Bhattarai, Bishnu Prasad; Mendaza, Iker Diaz de Cerio; Myers, Kurt S.

    2018-01-01

    system operators (DSOs) to make faster operational decisions. Moreover, the aggregation enables flexibility from small distributed flexible resources to be traded to different power and energy markets. A hierarchical control architecture comprising a combination of centralized and decentralized control...... is demonstrated through simulation of three operational scenarios in a real low voltage distribution system having high penetrations of electric vehicles and heat pumps. The simulation results demonstrated that the aggregation helps DSOs not only in taking faster operational decisions, but also in effectively...

  4. Reducing usage of the computational resources by event driven approach to model predictive control

    Science.gov (United States)

    Misik, Stefan; Bradac, Zdenek; Cela, Arben

    2017-08-01

    This paper deals with a real-time and optimal control of dynamic systems while also considers the constraints which these systems might be subject to. Main objective of this work is to propose a simple modification of the existing Model Predictive Control approach to better suit needs of computational resource-constrained real-time systems. An example using model of a mechanical system is presented and the performance of the proposed method is evaluated in a simulated environment.

  5. Bilateral collaboration in built heritage material research and resource maintenance supportive to smart and sustainable cities

    NARCIS (Netherlands)

    Quist, W.J.; Clarke, N.J.; van Hees, R.P.J.; Conradie, D.C.U.; du Plessis, C.; van den Dobbelsteen, A.A.J.F.

    2017-01-01

    Built heritage contains value on many scales. On the most basic level it represents the investment of building materials following a constructional logic. As the use of once-predominant materials goes out of fashion due to changing technological regimes and architectural styles, knowledge about them

  6. Fluidized bed combustion bottom ash: A better and alternative geo-material resource for construction.

    Science.gov (United States)

    Mandal, A K; Paramkusam, Bala Ramudu; Sinha, O P

    2018-04-01

    Though the majority of research on fly ash has proved its worth as a construction material, the utility of bottom ash is yet questionable due to its generation during the pulverized combustion process. The bottom ash produced during the fluidized bed combustion (FBC) process is attracting more attention due to the novelty of coal combustion technology. But, to establish its suitability as construction material, it is necessary to characterize it thoroughly with respect to the geotechnical as well as mineralogical points of view. For fulfilling these objectives, the present study mainly aims at characterizing the FBC bottom ash and its comparison with pulverized coal combustion (PCC) bottom ash, collected from the same origin of coal. Suitability of FBC bottom ash as a dike filter material in contrast to PCC bottom ash in replacing traditional filter material such as sand was also studied. The suitability criteria for utilization of both bottom ash and river sand as filter material on pond ash as a base material were evaluated, and both river sand and FBC bottom ash were found to be satisfactory. The study shows that FBC bottom ash is a better geo-material than PCC bottom ash, and it could be highly recommended as an alternative suitable filter material for constructing ash dikes in place of conventional sand.

  7. To Kit or Not to Kit? Evaluating and Implementing Science Materials and Resources

    Science.gov (United States)

    Schiller, Ellen; Melin, Jacque; Bair, Mary

    2016-01-01

    With the release of the "Next Generation Science Standards," many schools are reexamining the science materials they are using. Textbook companies and kit developers are eager to meet the demand for "NGSS"-aligned teaching materials. Teacher may have been asked to serve on a science curriculum committee, or to evaluate current…

  8. Study of rare earth elements as material for control rods

    International Nuclear Information System (INIS)

    1975-03-01

    The properties of rare earth elements as the material for control rods were studied. The rare earth elements, especially europium oxide, has the nuclear property corresponding to boron carbide, and its neutron absorption process does not emit alpha particles. The elements produced as a result of neutron capture also have large capture cross sections. This paper presents survey report on the properties and nuclear properties of rare earth elements, and comparison with other materials. Preliminary experiment was performed to make the pellets of europium oxide, and is described in this paper. Because of large density, the crystal form to be made was monoclinic system. Europium hydroxide was decomposed at 1000 0 C and 10 -5 torr. The obtained powder was dipped into benzene, and dryed in the air at 450 0 C. This powder was pressed and sintered in the air for one hour at 1500 0 C. The density of the obtained pellets was 97.0% of the theoretical density. The cross section of europium for fast neutron absorption is not yet accurately obtained, and is in the range between 4.65 and 8.5 barn for 151 Eu(n,γ) reaction. Since chain absorption reaction is caused in Eu, the overall capability of neutron absorption is not much changed by the loss of original material due to absorption. The pellets of europium oxide may be handled in air, but must be kept in dry atmosphere. The reactions of europium oxide with various metals were also investigated. The characteristic behavior in case of irradiation depends on the amount of silicon contained, and it was very good if the amount was less than 0.03%. (Kato, T.)

  9. Controlling the Casimir force via the electromagnetic properties of materials

    International Nuclear Information System (INIS)

    Yang Yaping; Chen Hong; Zeng Ran; Zhu Shiyao; Zubairy, M. Suhail

    2010-01-01

    The control of the Casimir force between two parallel plates can be achieved through adjusting the frequency-dependent electromagnetic properties of materials of the two plates. We show that, for different plate separations, the main contribution to the Casimir force comes from different frequency regions: For smaller (larger) separation, it comes from the higher (lower) frequency region. When the separation of the plates increases, the Casimir force can vary from attractive to repulsive and/or vice versa, by selecting the two plates with suitable electromagnetic properties. We discuss how a restoring Casimir force, which varies from repulsive to attractive by increasing the separation, can be realized and that the stable equilibrium is formed at zero Casimir force.

  10. Radiological control criteria for materials considered for recycle and reuse

    International Nuclear Information System (INIS)

    Kennedy, W.E. Jr.; Hill, R.L.; Aaberg, R.L.; Wallo, A. III.

    1995-01-01

    Pacific Northwest Laboratory (PNL) is conducting technical analyses to support the U.S. Department of Energy (DOE), Office of Environmental Guidance, Air, Water, and Radiation Division (DOE/EH-232) in developing radiological control criteria for recycling or reuse of metals or equipment containing residual radioactive contamination from DOE operations. The criteria, framed as acceptable concentrations for release of materials for recycling or reuse, are risk-based and were developed through analysis of generic radiation exposure scenarios and pathways. The analysis includes evaluation of relevant radionuclides, potential mechanisms of exposure, and non-health-related impacts of residual radioactivity on electronics and film. The analysis considers 42 key radionuclides that DOE operations are known to generate and that may be contained in recycled or reused metals or equipment. The preliminary results are compared with similar results reported by the International Atomic Energy Agency, by radionuclide grouping. (author)

  11. Radiological control criteria for materials considered for recycle and reuse

    International Nuclear Information System (INIS)

    Kennedy, W.E. Jr.; Hill, R.L.; Aaberg, R.L.; Wallo, A. III

    1994-11-01

    Pacific Northwest Laboratory (PNL) is conducting technical analyses to support the US Department of Energy (DOE), Office of Environmental Guidance, Air, Water, and Radiation Division (DOE/EH-232) in developing radiological control criteria for recycling or reuse of metals or equipment containing residual radioactive contamination from DOE operations. The criteria, framed as acceptable concentrations for release of materials for recycling or reuse, are risk-based and were developed through analysis of generic radiation exposure scenarios and pathways. The analysis includes evaluation of relevant radionuclides, potential mechanisms of exposure, and non-health-related impacts of residual radioactivity on electronics and film. The analysis considers 42 key radionuclides that DOE operations are known to generate and that may be contained in recycled or reused metals or equipment. Preliminary results are compared with similar results reported by the International Atomic Energy Agency, by radionuclide grouping

  12. Nuclear material control and accounting by process simulation with smalltalk

    International Nuclear Information System (INIS)

    O'Rourke, P.E.; Soper, P.D.

    1986-01-01

    Smalltalk, an object oriented computer language, enables programmers to build data structures and code which explicitly reflect the structure and working of a facility in an easily understood fashion. This paper discusses demonstration material control and accounting system that has been written in Smalltalk for the IBM PC-XT computer using the methods environment from Digitalk, Inc. The system is designed to track uranium through a processing facility. The objects are generic and not specific to any facility, objects like vault positions or tanks are created from classes of objects called uranium accounts. Uranium account objects are connected by a list of transfer rules which should reflect the operation of the facility. If operations or equipment are changed, only those rules or objects which simulate the affected components must be changed. By the nature of Smalltalk code, other objects will not be affected by these changes

  13. Novel cost controlled materials and processing for primary structures

    Science.gov (United States)

    Dastin, S. J.

    1993-01-01

    Textile laminates, developed a number of years ago, have recently been shown to be applicable to primary aircraft structures for both small and large components. Such structures have the potential to reduce acquisition costs but require advanced automated processing to keep costs controlled while verifying product reliability and assuring structural integrity, durability and affordable life-cycle costs. Recently, resin systems and graphite-reinforced woven shapes have been developed that have the potential for improved RTM processes for aircraft structures. Ciba-Geigy, Brochier Division has registered an RTM prepreg reinforcement called 'Injectex' that has shown effectivity for aircraft components. Other novel approaches discussed are thermotropic resins producing components by injection molding and ceramic polymers for long-duration hot structures. The potential of such materials and processing will be reviewed along with initial information/data available to date.

  14. Material Protection, Accounting, and Control Technologies (MPACT) Advanced Integration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Durkee, Joe W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Cipiti, Ben [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Demuth, Scott Francis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Fallgren, Andrew James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jarman, Ken [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Li, Shelly [Argonne National Lab. (ANL), Argonne, IL (United States); Meier, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Miller, Mike [Argonne National Lab. (ANL), Argonne, IL (United States); Osburn, Laura Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pereira, Candido [Argonne National Lab. (ANL), Argonne, IL (United States); Dasari, Venkateswara Rao [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ticknor, Lawrence O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Yoo, Tae-Sic [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-09-30

    The development of sustainable advanced nuclear fuel cycles is a long-term goal of the Office of Nuclear Energy’s (DOE-NE) Fuel Cycle Technologies program. The Material Protection, Accounting, and Control Technologies (MPACT) campaign is supporting research and development (R&D) of advanced instrumentation, analysis tools, and integration methodologies to meet this goal (Miller, 2015). This advanced R&D is intended to facilitate safeguards and security by design of fuel cycle facilities. The lab-scale demonstration of a virtual facility, distributed test bed, that connects the individual tools being developed at National Laboratories and university research establishments, is a key program milestone for 2020. These tools will consist of instrumentation and devices as well as computer software for modeling, simulation and integration.

  15. Material Protection, Accounting, and Control Technologies (MPACT) Advanced Integration Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Mike [Idaho National Lab. (INL), Idaho Falls, ID (United States); Cipiti, Ben [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Demuth, Scott Francis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Durkee, Jr., Joe W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Fallgren, Andrew James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jarman, Ken [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Li, Shelly [Idaho National Lab. (INL), Idaho Falls, ID (United States); Meier, Dave [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Osburn, Laura Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pereira, Candido [Argonne National Lab. (ANL), Argonne, IL (United States); Dasari, Venkateswara Rao [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ticknor, Lawrence O. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Yoo, Tae-Sic [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-01-30

    The development of sustainable advanced nuclear fuel cycles is a long-term goal of the Office of Nuclear Energy’s (DOE-NE) Fuel Cycle Technologies program. The Material Protection, Accounting, and Control Technologies (MPACT) campaign is supporting research and development (R&D) of advanced instrumentation, analysis tools, and integration methodologies to meet this goal (Miller, 2015). This advanced R&D is intended to facilitate safeguards and security by design of fuel cycle facilities. The lab-scale demonstration of a virtual facility, distributed test bed, that connects the individual tools being developed at National Laboratories and university research establishments, is a key program milestone for 2020. These tools will consist of instrumentation and devices as well as computer software for modeling, simulation and integration.

  16. Controllable biomimetic adhesion using embedded phase change material

    International Nuclear Information System (INIS)

    Krahn, J; Sameoto, D; Menon, C

    2011-01-01

    In many cases, such as in the instance of climbing robots or temporary adhesives, there is the need to be able to dynamically control the level of adhesion a biomimetic dry adhesive can provide. In this study, the effect of changing the backing layer stiffness of a dry adhesive is examined. Embedding a phase change material within the backing of a synthetic dry adhesive sheet allows the stiffness to be tailored at different points of a preload and adhesion cycle. Larger contact areas and more equal load sharing between adhesive fibres can be achieved by increasing the backing layer stiffness after initial deformation when the adhesive backing is loaded in its softened state. Adhesion behaviour is examined when the backing layer is maintained in solid and softened phases during complete load cycles and for load cycles under the condition of contact with the softened phase backing followed by pull-off during the solid phase. Absolute adhesion force is increased for trials in which a soft backing layer hardens prior to pull-off. This effect is due to the increased contact area made between the rounded probe and the softened material during preloading and the more equal load sharing condition during pull-off when the backing layer becomes stiff again

  17. Ultrafast control and monitoring of material properties using terahertz pulses

    Energy Technology Data Exchange (ETDEWEB)

    Bowlan, Pamela Renee [Los Alamos National Lab. (LANL), Los Alamos, NM (United States). Lab. for Ultrafast Materials Optical Science (LUMOS)

    2016-05-02

    These are a set of slides on ultrafast control and monitoring of material properties using terahertz pulses. A few of the topics covered in these slides are: How fast is a femtosecond (fs), Different frequencies probe different properties of molecules or solids, What can a THz pulse do to a material, Ultrafast spectroscopy, Generating and measuring ultrashort THz pulses, Tracking ultrafast spin dynamics in antiferromagnets through spin wave resonances, Coherent two-dimensional THz spectroscopy, and Probing vibrational dynamics at a surface. Conclusions are: Coherent two-dimensional THz spectroscopy: a powerful approach for studying coherence and dynamics of low energy resonances. Applying this to graphene we investigated the very strong THz light mater interaction which dominates over scattering. Useful for studying coupled excitations in multiferroics and monitoring chemical reactions. Also, THz-pump, SHG-probe spectoscopy: an ultrafast, surface sensitive probe of atomic-scale symmetry changes and nonlinear phonon dymanics. We are using this in Bi2Se3 to investigate the nonlinear surface phonon dynamics. This is potentially very useful for studying catalysis.

  18. Upgrading nuclear material protection, control and accounting in Russia

    International Nuclear Information System (INIS)

    Caravelli, Jack; Behan, Chris; Fishbone, Les

    2001-01-01

    Full text: I. Program goal and organization - In this paper we review the Cooperative US-Russia Program of Nuclear Material Protection, Control and Accounting (MPC and A), whose goal is to reduce the risk of nuclear weapons proliferation by strengthening systems of MPC and A; thereby the Program enhances US national security. Based on this goal, the technical objective is to enhance, through US technical cooperation, the effectiveness of MPC and A systems at Russian sites with weapons-usable nuclear material, i.e. plutonium and highly enriched uranium. The Program exists because the extensive social, political and economic changes in Russia arising from the dissolution of the Soviet Union have increased the risk that these materials would be subject to theft or other misuse, with potentially grave consequences. On the US side, the MPC and A Program is administered by the US Department of Energy (DOE) National Nuclear Security Administration through the DOE national laboratories and other contractors. On the Russian side, the Program is administered by the Russian Ministry of Atomic Energy (Minatom) through its nuclear sites, by the regulatory agency Gosatomnadzor, and by nuclear sites not under Minatom. To carry out the Program objective, the DOE national laboratories consummate contracts with the Russian sites to implement agreed MPC and A upgrades. Deciding on what upgrades to perform depends on a cooperative analysis of site characteristics, materials, and vulnerabilities by joint US and Russian teams. Once the upgrades are agreed, the DOE laboratories supply technical and financial support and equipment to the Russian sites. The staff of the Russian sites do the work, and the US team members monitor the work through some combination - according to contract - of direct observation and reports, photographs and videotape supplied by the staff of the Russian sites. II. MPC and A task areas - Information in this review covers a selection of topical areas, with a

  19. Understanding and control of optical performance from ceramic materials

    International Nuclear Information System (INIS)

    Barbour, J.C.; Knapp, J.A.; Potter, B.G.; Jennison, D.R.; Verdozzi, C.A.; Follstaedt, D.M.; Bendale, R.D.; Simmons, J.H.

    1998-06-01

    This report summarizes a two-year Laboratory-Directed Research and Development (LDRD) program to gain understanding and control of the important parameters which govern the optical performance of rare-earth (RE) doped ceramics. This LDRD developed the capability to determine stable atomic arrangements in RE doped alumina using local density functional theory, and to model the luminescence from RE-doped alumina using molecular dynamic simulations combined with crystal-field calculations. Local structural features for different phases of alumina were examined experimentally by comparing their photoluminescence spectra and the atomic arrangement of the amorphous phase was determined to be similar to that of the gamma phase. The luminescence lifetimes were correlated to these differences in the local structure. The design of both high and low-phonon energy host materials was demonstrated through the growth of Er-doped aluminum oxide and lanthanum oxide. Multicomponent structures of rare-earth doped telluride glass in an alumina and silica matrix were also prepared. Finally, the optical performance of Er-doped alumina was determined as a function of hydrogen content in the host matrix. This LDRD is the groundwork for future experimentation to understand the effects of ionizing radiation on the optical properties of RE-doped ceramic materials used in space and other radiation environments

  20. A Randomised Controlled Trial of complete denture impression materials

    Science.gov (United States)

    Hyde, T.P.; Craddock, H.L.; Gray, J.C.; Pavitt, S.H.; Hulme, C.; Godfrey, M.; Fernandez, C.; Navarro-Coy, N.; Dillon, S.; Wright, J.; Brown, S.; Dukanovic, G.; Brunton, P.A.

    2014-01-01

    Objectives There is continuing demand for non-implant prosthodontic treatment and yet there is a paucity of high quality Randomised Controlled Trial (RCT) evidence for best practice. The aim of this research was to provide evidence for best practice in prosthodontic impressions by comparing two impression materials in a double-blind, randomised, crossover, controlled, clinical trial. Methods Eighty-five patients were recruited, using published eligibility criteria, to the trial at Leeds Dental Institute, UK. Each patient received two sets of dentures; made using either alginate or silicone impressions. Randomisations determined the order of assessment and order of impressions. The primary outcome was patient blinded preference for unadjusted dentures. Secondary outcomes were patient preference for the adjusted dentures, rating of comfort, stability and chewing efficiency, experience of each impression, and an OHIP-EDENT questionnaire. Results Seventy-eight (91.8%) patients completed the primary assessment. 53(67.9%) patients preferred dentures made from silicone impressions while 14(17.9%) preferred alginate impressions. 4(5.1%) patients found both dentures equally satisfactory and 7 (9.0%) found both equally unsatisfactory. There was a 50% difference in preference rates (in favour of silicone) (95%CI 32.7–67.3%, p alginate as their material of choice for secondary impressions for complete dentures. Trial Registration: ISRCTN 01528038.

 This article forms part of a project for which the author (TPH) won the Senior Clinical Unilever Hatton Award of the International Assocation for Dental Research, Capetown, South Africa, June 2014. PMID:24995473

  1. Consumer Education Resources Catalog. 16mm Films, Multi Media Kits, Video Cassettes, Simulations & Games, Printed Material.

    Science.gov (United States)

    Jones, Sandra; Bannister, Rosella

    This catalog lists teaching-learning resources available for preview at the Michigan Consumer Education Center. A subject index to multi-media identifies titles of films, video casettes, multi-media kits, and games under seven specific subjects. These are (1) Factors Affecting Consumer Behavior, (2) Money Management and Credit, (3) Buying and…

  2. Innovative Resources Based on ICTs and Authentic Materials to Improve EFL Students' Communicative Needs

    Science.gov (United States)

    González Otero, Rebeca

    2016-01-01

    Our global society and our current communication needs have put a strain on English as a Foreign Language (EFL) teaching, since common resources such as textbooks may fail to adapt to the needs and interests of our students. The present action research study aims at identifying EFL students' communicative needs and developing their oral skills…

  3. Resource sharing of online teaching materials: The lon-capa project

    Science.gov (United States)

    Bauer, Wolfgang

    2004-03-01

    The use of information technology resources in conventional lecture-based courses, in distance-learning offerings, as well as hybrid courses, is increasing. But this may put additional burden on faculty, who are now asked to deliver this new content. Additionally, it may require the installation of commercial courseware systems, putting the colleges and universities in new financial licensing dependencies. To address exactly these two problems, the lon-capa system was invented to provide an open-source, gnu public license based, courseware system that allows for sharing of educational resources across institutional and disciplinary boundaries. This presentation will focus on both aspects of the system, the courseware capabilities that allow for customized environments for individual students, and the educational resources library that enables teachers to take full advantages of the work of their colleagues. Research results on learning effectiveness, resource and system usage patterns, and customization for different learning styles will be shown. Institutional perceptions of and responses to open source courseware systems will be discussed.

  4. What Is the Impact of Online Resource Materials on Student Self-Learning Strategies?

    Science.gov (United States)

    Dowell, David John; Small, Felicity A.

    2011-01-01

    The purpose of this article is to examine how students are incorporating online resources into their self-regulated learning strategies. The process of developing these learning strategies and the importance of these strategies has been widely researched, but there has been little empirical research into how the students are affected by online…

  5. Chronic inhibition, self-control and eating behavior: test of a 'resource depletion' model.

    Directory of Open Access Journals (Sweden)

    Martin S Hagger

    Full Text Available The current research tested the hypothesis that individuals engaged in long-term efforts to limit food intake (e.g., individuals with high eating restraint would have reduced capacity to regulate eating when self-control resources are limited. In the current research, body mass index (BMI was used as a proxy for eating restraint based on the assumption that individuals with high BMI would have elevated levels of chronic eating restraint. A preliminary study (Study 1 aimed to provide evidence for the assumed relationship between eating restraint and BMI. Participants (N = 72 categorized into high or normal-range BMI groups completed the eating restraint scale. Consistent with the hypothesis, results revealed significantly higher scores on the weight fluctuation and concern for dieting subscales of the restraint scale among participants in the high BMI group compared to the normal-range BMI group. The main study (Study 2 aimed to test the hypothesized interactive effect of BMI and diminished self-control resources on eating behavior. Participants (N = 83 classified as having high or normal-range BMI were randomly allocated to receive a challenging counting task that depleted self-control resources (ego-depletion condition or a non-depleting control task (no depletion condition. Participants then engaged in a second task in which required tasting and rating tempting cookies and candies. Amount of food consumed during the taste-and-rate task constituted the behavioral dependent measure. Regression analyses revealed a significant interaction effect of these variables on amount of food eaten in the taste-and-rate task. Individuals with high BMI had reduced capacity to regulate eating under conditions of self-control resource depletion as predicted. The interactive effects of BMI and self-control resource depletion on eating behavior were independent of trait self-control. Results extend knowledge of the role of self-control in regulating eating

  6. Access Control Mechanism for IoT Environments Based on Modelling Communication Procedures as Resources.

    Science.gov (United States)

    Cruz-Piris, Luis; Rivera, Diego; Marsa-Maestre, Ivan; de la Hoz, Enrique; Velasco, Juan R

    2018-03-20

    Internet growth has generated new types of services where the use of sensors and actuators is especially remarkable. These services compose what is known as the Internet of Things (IoT). One of the biggest current challenges is obtaining a safe and easy access control scheme for the data managed in these services. We propose integrating IoT devices in an access control system designed for Web-based services by modelling certain IoT communication elements as resources. This would allow us to obtain a unified access control scheme between heterogeneous devices (IoT devices, Internet-based services, etc.). To achieve this, we have analysed the most relevant communication protocols for these kinds of environments and then we have proposed a methodology which allows the modelling of communication actions as resources. Then, we can protect these resources using access control mechanisms. The validation of our proposal has been carried out by selecting a communication protocol based on message exchange, specifically Message Queuing Telemetry Transport (MQTT). As an access control scheme, we have selected User-Managed Access (UMA), an existing Open Authorization (OAuth) 2.0 profile originally developed for the protection of Internet services. We have performed tests focused on validating the proposed solution in terms of the correctness of the access control system. Finally, we have evaluated the energy consumption overhead when using our proposal.

  7. Access Control Mechanism for IoT Environments Based on Modelling Communication Procedures as Resources

    Directory of Open Access Journals (Sweden)

    Luis Cruz-Piris

    2018-03-01

    Full Text Available Internet growth has generated new types of services where the use of sensors and actuators is especially remarkable. These services compose what is known as the Internet of Things (IoT. One of the biggest current challenges is obtaining a safe and easy access control scheme for the data managed in these services. We propose integrating IoT devices in an access control system designed for Web-based services by modelling certain IoT communication elements as resources. This would allow us to obtain a unified access control scheme between heterogeneous devices (IoT devices, Internet-based services, etc.. To achieve this, we have analysed the most relevant communication protocols for these kinds of environments and then we have proposed a methodology which allows the modelling of communication actions as resources. Then, we can protect these resources using access control mechanisms. The validation of our proposal has been carried out by selecting a communication protocol based on message exchange, specifically Message Queuing Telemetry Transport (MQTT. As an access control scheme, we have selected User-Managed Access (UMA, an existing Open Authorization (OAuth 2.0 profile originally developed for the protection of Internet services. We have performed tests focused on validating the proposed solution in terms of the correctness of the access control system. Finally, we have evaluated the energy consumption overhead when using our proposal.

  8. Access Control Mechanism for IoT Environments Based on Modelling Communication Procedures as Resources

    Science.gov (United States)

    2018-01-01

    Internet growth has generated new types of services where the use of sensors and actuators is especially remarkable. These services compose what is known as the Internet of Things (IoT). One of the biggest current challenges is obtaining a safe and easy access control scheme for the data managed in these services. We propose integrating IoT devices in an access control system designed for Web-based services by modelling certain IoT communication elements as resources. This would allow us to obtain a unified access control scheme between heterogeneous devices (IoT devices, Internet-based services, etc.). To achieve this, we have analysed the most relevant communication protocols for these kinds of environments and then we have proposed a methodology which allows the modelling of communication actions as resources. Then, we can protect these resources using access control mechanisms. The validation of our proposal has been carried out by selecting a communication protocol based on message exchange, specifically Message Queuing Telemetry Transport (MQTT). As an access control scheme, we have selected User-Managed Access (UMA), an existing Open Authorization (OAuth) 2.0 profile originally developed for the protection of Internet services. We have performed tests focused on validating the proposed solution in terms of the correctness of the access control system. Finally, we have evaluated the energy consumption overhead when using our proposal. PMID:29558406

  9. The R and D/operational MC and A [materials control and accounting] interface

    International Nuclear Information System (INIS)

    Shipley, J.P.

    1987-06-01

    Improvements in our ability to do materials control and accounting (MC and A) have been steady since the beginning of the nuclear age and the appearance of processes and facilities for handling nuclear materials. The motivation for these improvements has not been just safeguards: the desire for better process control also has played a major role, and the emergence of technology focused on the problems of MC and A has made it possible to pursue such improvements. However, it is a continuing challenge to match the needs of the operational MC and A elements with the capabilities and resources of the R and D community. In the last couple of years this challenge has been addressed very visibly by the DOE's Project Cerberus R and D Committee, which has devised a procedure to encourage closer interactions between the operations and R and D elements. In the particular case of Los Alamos, we have recently concluded the efforts of the Nuclear Materials Management and Safeguards Task Force, which made strong recommendations about the need for close internal cooperation. The issues associated with these activities and the specific means for addressing them, will be of surpassing interest for the future of safeguards

  10. Power flow control strategy in distribution network for dc type distributed energy resource at load bus

    International Nuclear Information System (INIS)

    Hanif, A.; Choudhry, M.A.

    2013-01-01

    This research work presents a feed forward power flow control strategy in the secondary distribution network working in parallel with a DC type distributed energy resource (DER) unit with SPWM-IGBT Voltage Source Converter (VSC). The developed control strategy enables the VSC to be used as power flow controller at the load bus in the presence of utility supply. Due to the investigated control strategy, power flow control from distributed energy resource (DER) to common load bus is such that power flows to the load without facing any power quality problem. The technique has an added advantage of controlling power flow without having a dedicated power flow controller. The SPWM-IGBT VSC is serving the purpose of dc-ac converter as well as power flow controller. Simulations for a test system using proposed power flow control strategy are carried out using SimPower Systems toolbox of MATLAB at the rate and Simulink at the rate. The results show that a reliable, effective and efficient operation of DC type DER unit in coordination with main utility network can be achieved. (author)

  11. Review of selected dynamic material control functions for international safeguards

    International Nuclear Information System (INIS)

    Lowry, L.L.

    1980-09-01

    With the development of Dynamic Special Nuclear Material Accounting and Control systems used in nuclear manufacturing and reprocessing plants, there arises the question as to how these systems affect the IAEA inspection capabilities. The systems in being and under development provide information and control for a variety of purposes important to the plant operator, the safeguards purpose being one of them. This report attempts to judge the usefulness of these dynamic systems to the IAEA and have defined 12 functions that provide essential information to it. If the information acquired by these dynamic systems is to be useful to the IAEA, the inspectors must be able to independently verify it. Some suggestions are made as to how this might be done. But, even if it should not be possible to verify all the data, the availability to the IAEA of detailed, simultaneous, and plant-wide information would tend to inhibit a plant operator from attempting to generate a floating or fictitious inventory. Suggestions are made that might be helpful in the design of future software systems, an area which has proved to be fatally deficient in some systems and difficult in all

  12. Wind erosion control of soils using polymeric materials

    Directory of Open Access Journals (Sweden)

    Mohammad Movahedan

    2012-07-01

    Full Text Available Wind erosion of soils is one of the most important problems in environment and agriculture which could affects several fields. Agricultural lands, water reservoires, irrigation canals, drains and etc. may be affected by wind erosion and suspended particles. As a result wind erosion control needs attention in arid and semi-arid regions. In recent years, some polymeric materials have been used for improvement of structural stability, increasing aggregate stability and soil stabilization, though kind of polymer, quantity of polymer, field efficiency and durability and environmental impacts are some important parameters which should be taken into consideration. In this study, a Polyvinil Acetate-based polymer was used to treat different soils. Then polymer-added soil samples were investigated experimentally in a wind tunnel to verify the effecte of polymer on wind erosion control of the soils and the results were compared with water treated soil samples. The results of wind tunnel experiments with a maximum 26 m/s wind velocity showed that there was a significat difference between the erosion of polymer treated and water treated soil samples. Application of 25g/m2 polymer to Aeolian sands reduced the erosion of Aeolian sands samples to zero related to water treated samples. For silty and calyey soils treated by polymer, the wind erosion reduced minimum 90% in relation to water treated samples.

  13. A randomised controlled trial of complete denture impression materials.

    Science.gov (United States)

    Hyde, T P; Craddock, H L; Gray, J C; Pavitt, S H; Hulme, C; Godfrey, M; Fernandez, C; Navarro-Coy, N; Dillon, S; Wright, J; Brown, S; Dukanovic, G; Brunton, P A

    2014-08-01

    There is continuing demand for non-implant prosthodontic treatment and yet there is a paucity of high quality Randomised Controlled Trial (RCT) evidence for best practice. The aim of this research was to provide evidence for best practice in prosthodontic impressions by comparing two impression materials in a double-blind, randomised, crossover, controlled, clinical trial. Eighty-five patients were recruited, using published eligibility criteria, to the trial at Leeds Dental Institute, UK. Each patient received two sets of dentures; made using either alginate or silicone impressions. Randomisations determined the order of assessment and order of impressions. The primary outcome was patient blinded preference for unadjusted dentures. Secondary outcomes were patient preference for the adjusted dentures, rating of comfort, stability and chewing efficiency, experience of each impression, and an OHIP-EDENT questionnaire. Seventy-eight (91.8%) patients completed the primary assessment. 53(67.9%) patients preferred dentures made from silicone impressions while 14(17.9%) preferred alginate impressions. 4(5.1%) patients found both dentures equally satisfactory and 7 (9.0%) found both equally unsatisfactory. There was a 50% difference in preference rates (in favour of silicone) (95%CI 32.7-67.3%, pUnilever Hatton Award of the International Assocation for Dental Research, Capetown, South Africa, June 2014. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

  14. Programs and resources for control of job stress in the Federal workplace

    Science.gov (United States)

    Joice, Wendell

    1993-01-01

    A couple of weeks ago, the American Psychological Association and the National Institute of Occupational Safety and Health held a conference in Washingtion, D.C. entitled 'Stress in the 90's'. At this conference the Office of Personnel Management (OPM) conducted a session on 'Programs and Resources for the Control of Job Stress in the Federal Workplace'. I am going to present an overview of that three-hour session and some related information from the conference. My discussion covers stress terminology and models, selected programs and resources, evaluation research, some concerns about our progress, and plans to expand our efforts at OPM.

  15. Brownfields Recover Your Resources - Reduce, Reuse, and Recycle Construction and Demolition Materials at Land Revitalization Projects

    Science.gov (United States)

    This document provides background information on how the sustainable reuse of brownfield properties includes efforts to reduce the environmental impact by reusing and recycling materials generated during building construction, demolition, or renovation.

  16. Sustainable materials: issues in implementing resource efficiency – A UK policy & planning perspective

    OpenAIRE

    Odeleye, Dellé; Menzies, Brian

    2010-01-01

    Increasing the recovery of construction and demolition wastes, and the use of sustainable materials in construction is dependent on a range of drivers that influence design and project planning decisions, as well as mainstream practice on construction sites. In the absence of sustainable materials standards in UK Building Regulations, behaviour is influenced by a combination of sustainability assessment ratings (e.g. BREEAM and the Code for Sutainable Homes), waste regulations, landfill taxes...

  17. Negative thermal expansion materials: technological key for control of thermal expansion

    OpenAIRE

    Koshi Takenaka

    2012-01-01

    Most materials expand upon heating. However, although rare, some materials contract upon heating. Such negative thermal expansion (NTE) materials have enormous industrial merit because they can control the thermal expansion of materials. Recent progress in materials research enables us to obtain materials exhibiting negative coefficients of linear thermal expansion over −30 ppm K−1. Such giant NTE is opening a new phase of control of thermal expansion in composites. Specifically examining pra...

  18. Current Control and Performance Evaluation of Converter Interfaced Distribution Resources in Grid Connected Mode

    Directory of Open Access Journals (Sweden)

    SINGH Alka

    2012-10-01

    Full Text Available Use of distributed resources is growing in developing countries like India and in developed nations too. The increased acceptance of suchresources is mainly due to their modularity, increased reliability, good power quality and environment friendly operation. These are currently being interfaced to the existing systems using voltage source inverters (VSC’s. The control of such distributed resources is significantly different than the conventional power systems mainly because the VSC’s have no inertia unlike the synchronous generators.This paper deals with the Matlab modeling and design of control aspects of one such distributed source feeding a common load. A grid connected supply is also available. The control algorithm is developed for real and reactive power sharing of the load between thedistributed source and the grid. The developed control scheme is tested for linear (R-L load as well as nonlinear loads. With suitable modifications, the control algorithm can be extended for several distributed resources connected in parallel.

  19. Prevention and control of rheumatic heart disease: Overcoming core challenges in resource-poor environments

    Science.gov (United States)

    Dougherty, Scott; Beaton, Andrea; Nascimento, Bruno R; Zühlke, Liesl J; Khorsandi, Maziar; Wilson, Nigel

    2018-01-01

    Rheumatic heart disease (RHD) has long receded as a significant threat to public health in high-income countries. In low-resource settings, however, the specter of RHD remains unabated, as exemplified by recent data from the Global Burden of Diseases Study. There are many complex reasons for this ongoing global disparity, including inadequate data on disease burden, challenges in effective advocacy, ongoing poverty and inequality, and weak health systems, most of which predominantly affect developing nations. In this review, we discuss how each of these acts as a core challenge in RHD prevention and control. We then examine key lessons learnt from successful control programs in the past and highlight resources that have been developed to help create strong national RHD control programs. PMID:29440834

  20. Use of magnetic carbon composites from renewable resource materials for oil spill clean up and recovery

    Science.gov (United States)

    Viswanathan, Tito

    2014-02-11

    A method for separating a liquid hydrocarbon material from a body of water. In one embodiment, the method includes the steps of mixing a plurality of magnetic carbon-metal nanocomposites with a liquid hydrocarbon material dispersed in a body of water to allow the plurality of magnetic carbon-metal nanocomposites each to be adhered by an amount of the liquid hydrocarbon material to form a mixture, applying a magnetic force to the mixture to attract the plurality of magnetic carbon-metal nanocomposites each adhered by an amount of the liquid hydrocarbon material, and removing said plurality of magnetic carbon-metal nanocomposites each adhered by an amount of the liquid hydrocarbon material from said body of water while maintaining the applied magnetic force, wherein the plurality of magnetic carbon-metal nanocomposites is formed by subjecting one or more metal lignosulfonates or metal salts to microwave radiation, in presence of lignin/derivatives either in presence of alkali or a microwave absorbing material.

  1. ReflectoActive(trademark) Seals for Materials Control and Accountability

    International Nuclear Information System (INIS)

    Richardson, G.D.; Younkin, J.R.; Bell, Z.W.

    2002-01-01

    The ReflectoActive(trademark) Seals system, a continuously monitored fiber optic, active seal technology, provides real-time tamper indication for large arrays of storage containers. The system includes a PC running the RFAS software, an Immediate Detection Unit (IDU), an Optical Time Domain Reflectometer (OTDR), links of fiber optic cable, and the methods and devices used to attach the fiber optic cable to the containers. When a breach on any of the attached fiber optic cable loops occurs, the IDU immediately signals the connected computer to control the operations of an OTDR to seek the breach location. The ReflectoActive(trademark) Seals System can be adapted for various types of container closure designs and implemented in almost any container configuration. This automatic protection of valued assets can significantly decrease the time and money required for surveillance. The RFAS software is the multi-threaded, client-server application that monitors and controls the components of the system. The software administers the security measures such as a two-person rule as well as continuous event logging. Additionally the software's architecture provides a secure method by which local or remote clients monitor the system and perform administrative tasks. These features provide the user with a robust system to meet today's material control and accountability needs. A brief overview of the hardware, and different hardware configurations will be given. The architecture of the system software, and its benefits will then be discussed. Finally, the features to be implemented in future versions of the system will be presented

  2. Microstructural evolution and control in laser material processing

    International Nuclear Information System (INIS)

    Kaul, R.; Nath, A.K.

    2005-01-01

    Laser processing, because of its characteristic features, often gives rise to unique microstructure and properties not obtained with other conventional processes. We present various diverse laser processing case studies involving control of microstructure through judicious selection of processing parameters carried out with indigenously developed high power CO 2 lasers. The first study describes microstructural control during end plug laser welding of PFBR fuel pin, involving crack pone alloy D9 tube and type 316 M stainless steel (SS) plug, through preferential displacement of focused laser beam. Crater and associated cracks were eliminated by suitable laser power ramping. Another case study describes how low heat input characteristics of laser cladding process has been exploited for suppressing dilution in 'Colomony 6' deposits on austenitic SS. The results are in sharp contrast to extensive dilution noticed in Colmony 6 hard faced deposits made by GTAW. A novel laser surface melting (LSM) treatment for type 316 (N) SS weld metal has been developed to generate a sensitization-resistant microstructure which leads to enhanced resistance against intergranular corrosion (IGC). IGC resistance of laser treated surface has been found to be critically dependent on laser processing parameters. Experimental observations have been analyzed with thermal simulation. We have also studied the effect of laser beam spatial intensity profile on the microstructure in LSM. We have developed laser-assisted graded hard facing of austenitic SS substrate with Stellite 6 which, in contrast to direct deposition either by laser or GTAW, produced smooth transition in chemical composition and hardness used to control grain coarsening and martensite formation in type 430 SS weldment. Laser rapid manufacturing (LRM) is emerging as a new rapid and cost effective process for low volume fabrication, esp. of expensive materials. The talk will also present microstructural characteristics of laser

  3. Rationale for using integrated enzymatic preparation for receiving food fibers from secondary resources of vegetable material processing

    Directory of Open Access Journals (Sweden)

    Alimov A. V.

    2016-09-01

    Full Text Available The purpose of the work is to establish some rational modes of receipt of the food fibers (FF from secondary resources of vegetable raw materials. Studying chemical properties of research objects has been carried out by standard methods in accordance with the GOST 26183–84, GOST 7636–85, GOST 25555.3–82, GOST 28561–90. Determination of reducing and not reducing sugars content has been performed by the cyanide method; determination of pectinaceous substances' content – by the calcium-pectate method. As an enzyme medicine the earlier not studied complex enzyme medicine of proteolytic and amilolytic action of Bacillus subtilis and Penicillium emersonii cultures has been tested. Studying heat stability of complex enzyme medicine has been carried out at varying of the hydrolysis temperature from 40 °C to 80 °C. The fractional composition of carbohydrates of secondary resources of aubergines, vegetable marrows and onions conversion has been researched. Content of FF (cellulose, gemitsellyuloza, pectin in waste from conversion of vegetable marrows constitutes 42 % of general content of carbohydrates, aubergines – 39,2 %, and onion – 30,4 %. Chemical and carbohydrate structures of secondary resources of vegetable raw materials allow consider them as FF source, and also shows feasibility of their conversion without fractionation by the form of secondary resources. The rational modes of hydrolysis of vegetable raw materials secondary resources' mix for removing the accompanying organic compounds have been determined. The maximum proteolytic activity of enzyme medicine takes place at the temperature of 50 °C, amilolytic activity – at 70 °C. In case of рН increase from 2.0 to 6.0 proteolytic and amilolytic activity reaches the maximum and constitutes 94 % and 95 % respectively, in case of further increase рН the activity decreases. The rational value of рН of reactionary environment when carrying out enzymatic hydrolysis in the

  4. [Current situation of human resources of parasitic disease control and prevention organizations in Henan Province].

    Science.gov (United States)

    Ya-Lan, Zhang; Yan-Kun, Zhu; Wei-Qi, Chen; Yan, Deng; Peng, Li

    2018-01-10

    To understand the current status of human resources of parasitic disease control and prevention organizations in Henan Province, so as to provide the reference for promoting the integrative ability of the prevention and control of parasitic diseases in Henan Province. The questionnaires were designed and the method of census was adopted. The information, such as the amounts, majors, education background, technical titles, working years, and turnover in each parasitic disease control and prevention organization was collected by the centers for disease control and prevention (CDCs) at all levels. The data were descriptively analyzed. Totally 179 CDCs were investigated, in which only 19.0% (34/179) had the independent parasitic diseases control institution (department) . There were only 258 full-time staffs working on parasitic disease control and prevention in the whole province, in which only 61.9% (159/258) were health professionals. Those with junior college degree or below in the health professionals accounted for 60.3% (96/159) . Most of them (42.1%) had over 20 years of experience, but 57.9% (92/159) of their technical post titles were at primary level or below. The proportion of the health professionals is low in the parasitic disease control and prevention organizations in Henan Province. The human resource construction for parasitic disease control and prevention at all levels should be strengthened.

  5. Raw Materials Synthesis from Heavy Metal Industry Effluents with Bioremediation and Phytomining: A Biomimetic Resource Management Approach

    Directory of Open Access Journals (Sweden)

    Salmah B. Karman

    2015-01-01

    Full Text Available Heavy metal wastewater poses a threat to human life and causes significant environmental problems. Bioremediation provides a sustainable waste management technique that uses organisms to remove heavy metals from contaminated water through a variety of different processes. Biosorption involves the use of biomass, such as plant extracts and microorganisms (bacteria, fungi, algae, yeast, and represents a low-cost and environmentally friendly method of bioremediation and resource management. Biosorption-based biosynthesis is proposed as a means of removing heavy metals from wastewaters and soils as it aids the development of heavy metal nanoparticles that may have an application within the technology industry. Phytomining provides a further green method of managing the metal content of wastewater. These approaches represent a viable means of removing toxic chemicals from the effluent produced during the process of manufacturing, and the bioremediation process, furthermore, has the potential to save metal resources from depletion. Biomimetic resource management comprises bioremediation, biosorption, biosynthesis, phytomining, and further methods that provide innovative ways of interpreting waste and pollutants as raw materials for research and industry, inspired by materials, structures, and processes in living nature.

  6. Research on the control strategy of distributed energy resources inverter based on improved virtual synchronous generator.

    Science.gov (United States)

    Gao, Changwei; Liu, Xiaoming; Chen, Hai

    2017-08-22

    This paper focus on the power fluctuations of the virtual synchronous generator(VSG) during the transition process. An improved virtual synchronous generator(IVSG) control strategy based on feed-forward compensation is proposed. Adjustable parameter of the compensation section can be modified to achieve the goal of reducing the order of the system. It can effectively suppress the power fluctuations of the VSG in transient process. To verify the effectiveness of the proposed control strategy for distributed energy resources inverter, the simulation model is set up in MATLAB/SIMULINK platform and physical experiment platform is established. Simulation and experiment results demonstrate the effectiveness of the proposed IVSG control strategy.

  7. Job control and social support as coping resources in job satisfaction.

    Science.gov (United States)

    Shimazu, Akihito; Shimazu, Miyuki; Odahara, Tsutomu

    2004-04-01

    This study examined the effects of active coping on job satisfaction in the context of the job demands-control-support model. Participants were 867 employees (811 men and 56 women, M age = 35.2 yr.) of a large electrical company in Japan. Hierarchical multiple regression analysis examined whether effects of active coping on job satisfaction might depend on the extent of coping resources, such as job control or social support (supervisor and coworker). Analysis showed that the effect of active coping on job satisfaction depended on the extent of coworkers' support, not on job control and supervisors' support.

  8. Piles used for the nuclear control of materials; Empilements pour le controle nucleaire des materiaux

    Energy Technology Data Exchange (ETDEWEB)

    Raievski, V; Sautiez, B; Bailly du Bois, B; Tretiakoff, O; Thome, P; Vidal, R; Koppel Martelly, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The devices which make it possible to check on the nuclear qualities of the materials used in reactor construction are described. These verifications bear on substantial masses of materials, following the last stage of their machining. The components found in all these are a graphite pile into which the material to be investigated is inserted, a source of neutrons made up of an Ra-Be system, and a proportional BF{sub 3} counter. The devices described here bear on checking graphite, beryllium oxide and uranium absorption, as well as on a verification of the {sup 235}U content of fuel elements. (author)Fren. [French] On decrit des dispositifs permettant de controler les qualites nucleaires de materiaux utilises dans la construction des piles. Ce controle s'effectue sur des masses importantes de materiaux apres la phase finale d'usinage. Ces dispositifs ont en commun un empilement de graphite recevant le materiau a etudier, une source de neutrons de Ra-Be et un compteur proportionnel a BF{sub 3}. Les dispositifs decrits concernent le controle de l'absorption du graphite, de la glucine et de l'uranium, ainsi que le controle de la teneur en {sup 235}U des elements de combustion. (auteur)

  9. Weed Control in Maize-Cowpea Intercropping System Related to Environmental Resources Consumption

    Directory of Open Access Journals (Sweden)

    Hamdollah ESKANDARI

    2011-03-01

    Full Text Available A field experiment was carried out in Ramhormoz, Iran during the 2008-2009 growing season to investigate the effects of different planting pattern of intercropping on environmental resource consumption and weed biomass. A randomized complete block design (RCBD with three replications was employed to compare the treatments. Treatments included maize sole crop (M, cow pea sole crop (C, within row intercropping (I1, row intercropping (I2 and mix cropping (I3. The density of intercropping was according to replacement design (one maize replaced by three cow pea plants. The results showed that environmental resource consumption was significantly (P?0.05 affected by cropping system, where PAR interception, moisture and nutrients uptake were higher in intercropping systems compared to sole crop systems. Regarding to weed control, intercrops were more effective than sole crops and it was related to lower availability of environmental resources for weeds in intercropping systems.

  10. Integration of domain and resource-based reasoning for real-time control in dynamic environments

    Science.gov (United States)

    Morgan, Keith; Whitebread, Kenneth R.; Kendus, Michael; Cromarty, Andrew S.

    1993-01-01

    A real-time software controller that successfully integrates domain-based and resource-based control reasoning to perform task execution in a dynamically changing environment is described. The design of the controller is based on the concept of partitioning the process to be controlled into a set of tasks, each of which achieves some process goal. It is assumed that, in general, there are multiple ways (tasks) to achieve a goal. The controller dynamically determines current goals and their current criticality, choosing and scheduling tasks to achieve those goals in the time available. It incorporates rule-based goal reasoning, a TMS-based criticality propagation mechanism, and a real-time scheduler. The controller has been used to build a knowledge-based situation assessment system that formed a major component of a real-time, distributed, cooperative problem solving system built under DARPA contract. It is also being employed in other applications now in progress.

  11. Potentials for Improvement of Resource Efficiency in Printed Circuit Board Manufacturing: A Case Study Based on Material Flow Cost Accounting

    Directory of Open Access Journals (Sweden)

    Yi-Xuan Wang

    2017-05-01

    Full Text Available The pursuit of sustainable resource use by manufacturing companies is driven by resource scarcity, environmental awareness, and cost savings potentials. To address these issues, Material Flow Cost Accounting (MFCA has been developed and applied as an effective environmental management tool. Within MFCA’s general allocation, the accounts of products and losses are overrated by weight or volume. However, such a method is incompatible with Printed Circuit Board (PCB manufacturing because of industry characteristics in which primary inputs and products are measured by area. Based on MFCA, this case study systematically established several linear cost calculation models along the production process for capturing the actual waste flows as well as performing cost-benefit analysis. The recognition of previously ignored losses offered the incentive to find appropriate indicators to conduct cost-benefit analysis on hotspots for losses. Loss identification and analysis indicated that machining and wiring are the necessities and priorities of process optimization for resource efficiency improvement measures. Therefore, this research could not only advance the achievement of a profitable and sustainable production while improving resource efficiency at the source but could also provide support for decision making in PCB manufacturing.

  12. Organization of customs control of fissionable and other radioactive materials

    International Nuclear Information System (INIS)

    Ukhlinov, L.; Bojko, V.

    2001-01-01

    Among the routine inspection tasks of the Sheremetyevo customs office are tasks stemming from international commitments of Russia to prevent proliferation of nuclear weapons and material that can be used for making these weapons. These tasks are: radiation monitoring of all vehicles, passengers, their luggage and goods crossing the state border; inspection of fissionable and radioactive materials (FRM) legally transported by participants in the foreign trade activities with a view to checking that the declared data fully correspond to the actual radioactive cargo. Organizational measures and technical measures at the Sheremetyevo customs office are described in detail. The efficiency of the scheme is illustrated by the following figures. In 1997, when appropriate technical means and trained personnel were lacking, there were only 2 events of detecting items with a rather high radioactivity level in the luggage. In 1999, after the entire radiation monitoring system was fully deployed (i.e. the flight checkpoint was equipped with technical means of radiation monitoring, personnel was trained, special technologies and algorithms were developed), there were 61 events of radiation detection, and in 2000 there have been 90 events, including breaches of legal FRM traffic regulations through disagreement of declared and actual parameters. We believe that the above-considered organization of radiation monitoring allows effective and quite reliable control of and adequate response to possible illicit transport of FRM through the airport Sheremetyevo to other countries, including CIS. In the near future we plan to increase the efficiency of the radiation monitoring by integrating the currently operational customs-used stationary FRM detection systems into a single information network capable of providing simultaneous video-aided continuous nuclear monitoring at three terminals (Sheremetyevo-1, Sheremetyevo-2, Sheremetyevo-Cargo) with display of information at the workstation

  13. Nonlinear phononics and structural control of strongly correlated materials

    Energy Technology Data Exchange (ETDEWEB)

    Mankowsky, Roman

    2016-01-20

    Mid-infrared light pulses can be used to resonantly excite infrared-active vibrational modes for the phase control of strongly correlated materials on subpicosecond timescales. As the energy is transferred directly into atomic motions, dissipation into the electronic system is reduced, allowing for the emergence of unusual low energy collective properties. Light-induced superconductivity, insulator-metal transitions and melting of magnetic order demonstrate the potential of this method. An understanding of the mechanism, by which these transitions are driven, is however missing. The aim of this work is to uncover this process by investigating the nonlinear lattice dynamics induced by the excitation and to elucidate their contribution to the modulation of collective properties of strongly correlated materials. The first signature of nonlinear lattice dynamics was reported in the observation of coherent phonon oscillations, resonant with the excitation of an infrared-active phonon mode in a manganite. This nonlinear phononic coupling can be described within a model, which predicts not only oscillatory coherent phonons dynamics but also directional atomic displacements along the coupled modes on average, which could cause the previously observed transitions. We verified this directional response and quantified the anharmonic coupling constant by tracing the atomic motions in a time-resolved hard X-ray diffraction experiment with sub-picometer spatial and femtosecond temporal resolution. In a subsequent study, we investigated the role of nonlinear lattice dynamics in the emergence of superconductivity far above the equilibrium transition temperature, an intriguing effect found to follow lattice excitation of YBa{sub 2}Cu{sub 3}O{sub 6+x}. By combining density functional theory (DFT) calculations of the anharmonic coupling constants with time-resolved X-ray diffraction experiments, we identified a structural rearrangement, which appears and decays with the same temporal

  14. 21 CFR 862.1660 - Quality control material (assayed and unassayed).

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Quality control material (assayed and unassayed... Test Systems § 862.1660 Quality control material (assayed and unassayed). (a) Identification. A quality... that may arise from reagent or analytical instrument variation. A quality control material (assayed and...

  15. Young people and ICT – materials shaping resource-intensive practices?

    DEFF Research Database (Denmark)

    Christensen, Toke Haunstrup; Rommes, Els

    2016-01-01

    The extensive use of information and communication technology (ICT) in everyday practices results in increasing levels of consumption of energy and materials. Academics, NGOs and policymakers are beginning to address this issue and develop policies and campaigns to promote “sustainable” use of ICT....... The use of ICT is particularly widespread among young people, and this paper investigates the practices related to young people’s use of ICT. More specifically, we focus on the use of smart phones and laptops. The paper focuses on how the material qualities of smart phones, laptops and their related...... of ICT. Theoretically, the paper will apply a practice theoretical approach with STS concepts that bring the role of materials in shaping practices to the fore. In particular, we will draw on the Madeline Akrichs (1992) concept of (design) scripts. The analysis is based on focus groups with young people...

  16. STRUCTURING DEFENSE POLICIES FOR THE DEFENSE AND CONTROL OF STRATEGIC NATURAL RESOURCES

    Directory of Open Access Journals (Sweden)

    GABRIEL DE PAULA

    2018-02-01

    Full Text Available During the last decade, there has been a reconfiguration of a new geopolitical scenario. This new scenario focus on the assessment about strategic natural resources (oil, gas and water, and less important, biodiversity, food and fertile land and its spatial condition (the resources are in a territory which is politically defined by boundaries or zone of influence. The scenario in South America is not far from that international dynamic, which affects in different levels the strategic lines of national defense policies in Brazil, Venezuela and (in less degree Argentina. In that way, competence and confluence scenarios are defined, which may have variability in the conflict level, such as a military confrontation or cooperation mechanisms (as the South America Defense Council. These scenarios are geographically located in: oil and gas basins, Amazonas, water resources, Antarctica, Atlantic Ocean and fertile land. The defense strategies set parameters for the design of the armed forces, as far as the hypothesis of conflicts above-mentioned applied. Thus, the defense administration reconfigured the capabilities of the Armed Forces (logistic, personnel, doctrine, resources, surveillance, in order to achieve the mission of control the regions where availability of natural resources exists.

  17. Selective classification and quantification model of C&D waste from material resources consumed in residential building construction.

    Science.gov (United States)

    Mercader-Moyano, Pilar; Ramírez-de-Arellano-Agudo, Antonio

    2013-05-01

    The unfortunate economic situation involving Spain and the European Union is, among other factors, the result of intensive construction activity over recent years. The excessive consumption of natural resources, together with the impact caused by the uncontrolled dumping of untreated C&D waste in illegal landfills have caused environmental pollution and a deterioration of the landscape. The objective of this research was to generate a selective classification and quantification model of C&D waste based on the material resources consumed in the construction of residential buildings, either new or renovated, namely the Conventional Constructive Model (CCM). A practical example carried out on ten residential buildings in Seville, Spain, enabled the identification and quantification of the C&D waste generated in their construction and the origin of the waste, in terms of the building material from which it originated and its impact for every m(2) constructed. This model enables other researchers to establish comparisons between the various improvements proposed for the minimization of the environmental impact produced by building a CCM, new corrective measures to be proposed in future policies that regulate the production and management of C&D waste generated in construction from the design stage to the completion of the construction process, and the establishment of sustainable management for C&D waste and for the selection of materials for the construction on projected or renovated buildings.

  18. Protein Structure Initiative Material Repository: an open shared public resource of structural genomics plasmids for the biological community

    Science.gov (United States)

    Cormier, Catherine Y.; Mohr, Stephanie E.; Zuo, Dongmei; Hu, Yanhui; Rolfs, Andreas; Kramer, Jason; Taycher, Elena; Kelley, Fontina; Fiacco, Michael; Turnbull, Greggory; LaBaer, Joshua

    2010-01-01

    The Protein Structure Initiative Material Repository (PSI-MR; http://psimr.asu.edu) provides centralized storage and distribution for the protein expression plasmids created by PSI researchers. These plasmids are a resource that allows the research community to dissect the biological function of proteins whose structures have been identified by the PSI. The plasmid annotation, which includes the full length sequence, vector information and associated publications, is stored in a freely available, searchable database called DNASU (http://dnasu.asu.edu). Each PSI plasmid is also linked to a variety of additional resources, which facilitates cross-referencing of a particular plasmid to protein annotations and experimental data. Plasmid samples can be requested directly through the website. We have also developed a novel strategy to avoid the most common concern encountered when distributing plasmids namely, the complexity of material transfer agreement (MTA) processing and the resulting delays this causes. The Expedited Process MTA, in which we created a network of institutions that agree to the terms of transfer in advance of a material request, eliminates these delays. Our hope is that by creating a repository of expression-ready plasmids and expediting the process for receiving these plasmids, we will help accelerate the accessibility and pace of scientific discovery. PMID:19906724

  19. Controlling vacancies in chalcogenides as energy harvesting materials

    NARCIS (Netherlands)

    Li, Guowei

    2016-01-01

    Recent years witnessed fruitful results on tailoring properties and application performance, especially in the field of clean energy storage and harvesting materials. Defects, especially elemental vacancies, exist universally and are inevitable in materials. Due to the difficulties to precisely map

  20. Depletion of forest resources in Sudan. Intervention options for optimal control

    International Nuclear Information System (INIS)

    Hassan, Rashid; Hertzler, Greg; Benhin, James K.A.

    2009-01-01

    Agricultural expansion and over-cutting of trees for fuelwood are important causes of deforestation in arid and semi-arid countries such as Sudan. The consequence is increased desertification and high erosion and loss of soil nutrients leading to declining agricultural productivity. However, the social costs of the deforestation externality are not taken into account in present forest management and land use planning in Sudan leading to under-pricing and over-exploitation of the country's forest resources. This study evaluated the suitability of approaches commonly used by most forest resource management agencies for prediction of the state and control of harvesting of forest resources against alternative empirical simulation models using relevant information about economic behaviour of trading agents in the fuelwood market. Results showed the clear superiority of models integrating market behaviour over current approaches in the ability to better simulate real trends of wood consumption and hence depletion rates. The study also adopted an optimal control model to derive socially optimal forest harvesting regimes. The results showed that current rates of forest resource rent recovery and reforestation efforts are very far from optimal. Results also suggest that, in addition to optimal pricing and higher reforestation efforts, promotion and availability of fuel substitutes and investment in wood energy conversion efficiencies have a strong potential for curbing the problem of deforestation in Sudan. (author)

  1. Depletion of forest resources in Sudan. Intervention options for optimal control

    Energy Technology Data Exchange (ETDEWEB)

    Hassan, Rashid [Centre for Environmental Economics and Policy in Africa (CEEPA), Faculty of Natural and Agricultural Sciences, University of Pretoria, 0002 Pretoria (South Africa); Hertzler, Greg [Agricultural and Resource Economics, Faculty of Agriculture, Food and Natural Resources, The University of Sydney, Sydney, NSW 2006 (Australia); Benhin, James K.A. [Marine and Coastal Environmental Economics, Business School, University of Plymouth, Drake Circus, Plymouth, Devon PL4 8AA (United Kingdom)

    2009-04-15

    Agricultural expansion and over-cutting of trees for fuelwood are important causes of deforestation in arid and semi-arid countries such as Sudan. The consequence is increased desertification and high erosion and loss of soil nutrients leading to declining agricultural productivity. However, the social costs of the deforestation externality are not taken into account in present forest management and land use planning in Sudan leading to under-pricing and over-exploitation of the country's forest resources. This study evaluated the suitability of approaches commonly used by most forest resource management agencies for prediction of the state and control of harvesting of forest resources against alternative empirical simulation models using relevant information about economic behaviour of trading agents in the fuelwood market. Results showed the clear superiority of models integrating market behaviour over current approaches in the ability to better simulate real trends of wood consumption and hence depletion rates. The study also adopted an optimal control model to derive socially optimal forest harvesting regimes. The results showed that current rates of forest resource rent recovery and reforestation efforts are very far from optimal. Results also suggest that, in addition to optimal pricing and higher reforestation efforts, promotion and availability of fuel substitutes and investment in wood energy conversion efficiencies have a strong potential for curbing the problem of deforestation in Sudan. (author)

  2. Depletion of forest resources in Sudan: Intervention options for optimal control

    Energy Technology Data Exchange (ETDEWEB)

    Hassan, Rashid [Centre for Environmental Economics and Policy in Africa (CEEPA), Faculty of Natural and Agricultural Sciences, University of Pretoria, 0002 Pretoria (South Africa)], E-mail: rashid.hassan@up.ac.za; Hertzler, Greg [Agricultural and Resource Economics, Faculty of Agriculture, Food and Natural Resources, University of Sydney, Sydney, NSW 2006 (Australia); Benhin, James K.A. [Marine and Coastal Environmental Economics, Business School, University of Plymouth, Drake Circus, Plymouth, Devon PL4 8AA (United Kingdom)

    2009-04-15

    Agricultural expansion and over-cutting of trees for fuelwood are important causes of deforestation in arid and semi-arid countries such as Sudan. The consequence is increased desertification and high erosion and loss of soil nutrients leading to declining agricultural productivity. However, the social costs of the deforestation externality are not taken into account in present forest management and land use planning in Sudan leading to under-pricing and over-exploitation of the country's forest resources. This study evaluated the suitability of approaches commonly used by most forest resource management agencies for prediction of the state and control of harvesting of forest resources against alternative empirical simulation models using relevant information about economic behaviour of trading agents in the fuelwood market. Results showed the clear superiority of models integrating market behaviour over current approaches in the ability to better simulate real trends of wood consumption and hence depletion rates. The study also adopted an optimal control model to derive socially optimal forest harvesting regimes. The results showed that current rates of forest resource rent recovery and reforestation efforts are very far from optimal. Results also suggest that, in addition to optimal pricing and higher reforestation efforts, promotion and availability of fuel substitutes and investment in wood energy conversion efficiencies have a strong potential for curbing the problem of deforestation in Sudan.

  3. Environmental degradation of materials and corrosion control in metals

    International Nuclear Information System (INIS)

    Lou, J.; Elboujdaini, M.; Shoesmith, D.; Patnaik, P.C.

    2003-01-01

    The first International Symposium on Environmental Degradation of Materials and Corrosion Control In Metals (EDMCCM), held in Quebec City in 1999, was very successful. Encouraged by this success. the Metallurgical Society of CIM organized the Second International Conference in what is hoped will be an on-going series. This meeting was held in Vancouver, British Columbia, Canada, in August 2003. The objective of this conference was to provide a wide-ranging forum for the discussion of recent developments in the study and understanding of corrosion degradation of metals and alloys and the variety of processes by which corrosion damage accumulates. The scope of the meeting ranged from the fundamental to the very applied with a primary emphasis on the inter-relationships between chemical, electrochemical, mechanical and metallurgical features of corrosion. This symposium was an excellent forum for the exchange of ideas and approaches between generally disparate fields of endeavour. The success of the symposium can be gauged from the large number of papers presented and the outstanding level of international participation, with authors from China, Iran, Japan, North America, Russia, United Kingdom and Venezuela. In addition authors from six Canadian provinces (Alberta, British Columbia, New Brunswick, Ontario, Quebec, Saskatchewan) participated. Six keynote presentations covered a wide range of topics and industries in corrosion and corrosion control, and a total 45 papers were presented, spread over three days in six individual sessions; Electrochemistry and Corrosion of Metals, Corrosion and Cracking Behaviour. Hydrogen in Steel and Pipeline Corrosion, Corrosion Case Studies and Applications, Characterization of Corrosion Behaviour, and Corrosion Protection Coatings. (author)

  4. A computer program for controlling a university radioactive material inventory: From confusion to computer to control

    International Nuclear Information System (INIS)

    Robb, D.B.; Riches, C.G.; O'Brian, M.J.; Riordan, F.J.

    1984-01-01

    The University of Washington is a large user of radioactive material. Over 250 authorized programs are working in over 600 labs with nearly 3500 orders of radioactive material per year. The state license sets limits on the total amount of material on campus. There are also limits on sewer disposal. To meet these needs it is necessary to know the amount of material on campus at any time. A computer program was developed which covered many aspects of the radiation safety record needs including inventory control. Inventory is now managed by tracking each order from purchase to disposal. A screen menu as part of the interactive program allows immediate and detailed information about the inventory at time of purchase approval and delivery. Because of this system our knowledge and control of radionuclide work on campus has increased dramatically. A description of how this system is used during ordering, delivery and disposal will be given. Details on the methods to check limits are included along with a summary of the reports made possible by the current data files

  5. The Hawaiian Monarchy: Instructional Materials/Resources for Grade 7 Social Studies. Draft.

    Science.gov (United States)

    Hawaii State Dept. of Education, Honolulu. Office of Instructional Services.

    Materials in this curriculum guide for a seventh grade social studies course focus on the development of the monarchy period in Hawaii's history. Following a course outline, 10 study units cover map skills, early historical background, and the reigns of the following kings and queens: Kamehameha, Liholiho, Kauikeaouli, Alexander Liholiho, Lot,…

  6. Interactive computer-based instruction: Basic material control and accounting demonstration

    International Nuclear Information System (INIS)

    Keisch, B.

    1993-01-01

    The use of interactive, computer-based training (CBT) courses can be a time- and resource-saving alternative to formal instruction in a classroom milieu. With CBT, students can proceed at their own pace, fit the study course into their schedule, and avoid the extra time and effort involved in travel and other special arrangements. The demonstration given here is an abbreviated, annotated version of a recently developed course in basic material control and accounting designed for the MC and A novice. The system used is ''Quest'' which includes multi-media capabilities, individual scoring, and built-in result-reporting capabilities for the course administrator. Efficient instruction and training are more important than ever because of the growing numbers of relatively inexperienced persons becoming active in safeguards

  7. Determination of internationally controlled materials according to provisions of the law for the regulations of nuclear source materials, nuclear fuel materials and reactors

    International Nuclear Information System (INIS)

    1984-01-01

    The internationally controlled materials determined according to the law for nuclear source materials, etc. are the following: nuclear source materials, nuclear fuel materials, moderating materials, facilities including reactors, etc. sold, transferred, etc. to Japan according to the agreements for peaceful uses of atomic energy between Japan, and the United States, the United Kingdom, Canada, Australia and France by the respective governments and those organs under them; nuclear fuel materials resulting from usage of the above sold and transferred materials, facilities; nuclear fuel materials sold to Japan according to agreements set by the International Atomic Energy Agency; nuclear fuel materials involved with the safeguards in nuclear weapons non-proliferation treaty with IAEA. (Mori, K.)

  8. Application of telerobotic control to remote processing of nuclear material

    International Nuclear Information System (INIS)

    Merrill, R.D.; Grasz, E.L.; Herget, C.J.; Gavel, D.T.; Addis, R.B.; DeMinico, G.A.

    1991-01-01

    In processing radioactive material there are certain steps which have customarily required operators working at glove box enclosures. This can subject the operators to low level radiation dosages and the risk of accidental contamination, as well as generate significant radioactive waste to accommodate the human interaction. An automated system is being developed to replace the operator at the glove box and thus remove the human from these risks, and minimize waste. Although most of the processing can be automated with very little human operator interaction, there are some tasks where intelligent intervention is necessary to adapt to unexpected circumstances and events. These activities will require that the operator be able to interact with the process using a remote manipulator in a manner as natural as if the operator were actually in the work cell. This robot-based remote manipulation system, or telerobot, must provide the operator with an effective means of controlling the robot arm, gripper and tools. This paper describes the effort in progress in Lawrence Livermore National Laboratory to achieve this capability. 8 refs

  9. Criteria for Determination of Material Control and Accountability System Effectiveness

    International Nuclear Information System (INIS)

    John Wright

    2008-01-01

    The Nevada Test Site (NTS) is a test bed for implementation of the Safeguards First Principles Initiative (SFPI), a risk-based approach to Material Control and Accountability (MC and A) requirements. The Comprehensive Assessment of Safeguards Strategies (COMPASS) model is used to determine the effectiveness of MC and A systems under SFPI. Under this model, MC and A is divided into nine primary elements. Each element is divided into sub-elements. Then each sub-element is assigned two values, effectiveness and contribution, that are used to calculate the rating. Effectiveness is a measure of subelement implementation and how well it meets requirements. Contribution is a relative measure of the importance, and functions as a weighting factor. The COMPASS model provides the methodology for calculation of sub-element and element ratings, but not the actual criteria. Each site must develop its own criteria. For the rating to be meaningful, the effectiveness criteria must be objective and based on explicit, measurable criteria. Contribution (weights) must reflect the importance within the MC and A program. This paper details the NTS approach to system effectiveness and contribution values, and will cover the following: the basis for the ratings, an explanation of the contribution 'weights', and the objective, performance based effectiveness criteria. Finally, the evaluation process will be described

  10. Bleed water testing program for controlled low strength material

    International Nuclear Information System (INIS)

    Langton, C.A.

    1996-01-01

    Bleed water measurements for two Controlled Low Strength Material (CLSM) mixes were conducted to provide engineering data for the Tank 20F closure activities. CLSM Mix 1 contained 150 pounds of cement per cubic yard whereas CLSM Mix 2 contained 50 pounds per cub yard. SRS currently used CLSM Mix 2 for various applications. Bleed water percentages and generation rates were measured along with flow and compressive strength. This information will be used to select a mix design for the Tank 20F closure activities and to establish the engineering requirements, such as, lift height, time required between lifts and quantity of bleed water to be removed from the tank during the placement activities. Mix 1 is recommended for placement within Tank 20F because it has better flow characteristics, less segregation, lower percentage of bleed water and slightly higher strength. Optimization of Mix 1 was beyond the scope of this study. However, further testing of thickening additives, such as clays (bentonite), sodium silicate or fine silicas maybe useful for decreasing or eliminating bleed water

  11. ESTIMATION OF THE MODERN STATE OF PROVISION OF AGRICULTURAL ENTERPRISES IN MYKOLAIV REGION BY MATERIAL AND TECHNICAL RESOURCES

    Directory of Open Access Journals (Sweden)

    Natalya Potryvaieva

    2017-09-01

    Full Text Available The research considers the issue of the provision of agrarian enterprises in Ukraine by material and technical resources and effective use of them. The scientific novelty of the results obtained is in the research of theoretical positions, substantiation of applied approaches concerning the organization of material and technical provision of enterprises of the agrarian sector, in particular, Mykolaiv region, taking into account the proposals of the second market of agricultural machinery, units, and aggregates. Methodology. The purpose of the article is the research and estimation of the current state of the provision of agrarian enterprises by material and technical resources. The object of scientific research is the process of provision of material and technical resources for enterprises of the agrarian sector in Mykolaiv region. The level of material and technical resources at agricultural enterprises in Mykolaiv region is analysed. Relative improvement of the situation with technical equipment and energy supply of agriculture in the Mykolaiv region since 2014 is defined; however, the dynamics are not active sufficiently and do not exceed five percent. The ratio between the amount of machinery purchased and disposed of by depreciation is disproportionate, the equipment provided by the unit of area, and the load on the machines available in the farms do not meet the requirements. The dynamics of capital and direct foreign investments in agriculture of Mykolaiv region, which during the research period increased, is investigated. It is proved that despite the rather successful development of capital investments by large-scale agricultural producers in the region, financial investments in modernization, repair, and acquisition of the new technology by small business entities are not sufficiently active. The authors substantiate that the tasks of technical re-equipment for commodity producers of the Mykolaiv region remain one of the most important

  12. Verification and controller synthesis for resource-constrained real-time systems

    DEFF Research Database (Denmark)

    Li, Shuhao; Pettersson, Paul

    2010-01-01

    -TIGA to check whether a given control objective can be enforced, and if so, we synthesize a controller for the system. We carry out a case study of this approach on a battery-powered autonomous truck. Experimental results indicate that the method is effective and computationally feasible.......An embedded system is often subject to timing constraints, resource constraints, and it should operate properly no matter how its environment behaves. This paper proposes to use timed game automata to characterize the timed behaviors and the environment uncertainties, and use piece-wise constant...... integer functions to approximate the continuous resources in real-time embedded systems. Based on these formal models and techniques, we employ the realtime model checker UPPAAL to verify a system against a given functional and/or timing requirement. Furthermore, we employ the timed game solver UPPAAL...

  13. Negative thermal expansion materials: technological key for control of thermal expansion.

    Science.gov (United States)

    Takenaka, Koshi

    2012-02-01

    Most materials expand upon heating. However, although rare, some materials contract upon heating. Such negative thermal expansion (NTE) materials have enormous industrial merit because they can control the thermal expansion of materials. Recent progress in materials research enables us to obtain materials exhibiting negative coefficients of linear thermal expansion over -30 ppm K -1 . Such giant NTE is opening a new phase of control of thermal expansion in composites. Specifically examining practical aspects, this review briefly summarizes materials and mechanisms of NTE as well as composites containing NTE materials, based mainly on activities of the last decade.

  14. Negative thermal expansion materials: technological key for control of thermal expansion

    Directory of Open Access Journals (Sweden)

    Koshi Takenaka

    2012-01-01

    Full Text Available Most materials expand upon heating. However, although rare, some materials contract upon heating. Such negative thermal expansion (NTE materials have enormous industrial merit because they can control the thermal expansion of materials. Recent progress in materials research enables us to obtain materials exhibiting negative coefficients of linear thermal expansion over −30 ppm K−1. Such giant NTE is opening a new phase of control of thermal expansion in composites. Specifically examining practical aspects, this review briefly summarizes materials and mechanisms of NTE as well as composites containing NTE materials, based mainly on activities of the last decade.

  15. Negative thermal expansion materials: technological key for control of thermal expansion

    International Nuclear Information System (INIS)

    Takenaka, Koshi

    2012-01-01

    Most materials expand upon heating. However, although rare, some materials contract upon heating. Such negative thermal expansion (NTE) materials have enormous industrial merit because they can control the thermal expansion of materials. Recent progress in materials research enables us to obtain materials exhibiting negative coefficients of linear thermal expansion over −30 ppm K −1 . Such giant NTE is opening a new phase of control of thermal expansion in composites. Specifically examining practical aspects, this review briefly summarizes materials and mechanisms of NTE as well as composites containing NTE materials, based mainly on activities of the last decade. (topical review)

  16. Activate distributed energy resources' services: Hierarchical voltage controller as an application

    DEFF Research Database (Denmark)

    Han, Xue; Kosek, Anna Magdalena; Gehrke, Oliver

    2014-01-01

    The flexibilities from controllable distributed energy resources (DERs) offer the opportunities to mitigate some of the operation problems in the power distribution grid. The provision of system services requires the aggregation and coordination of their flexibilities, in order to obtain the flex......The flexibilities from controllable distributed energy resources (DERs) offer the opportunities to mitigate some of the operation problems in the power distribution grid. The provision of system services requires the aggregation and coordination of their flexibilities, in order to obtain...... the flexible capacity of large scale. In this paper, a hierarchical controller is presented to activate the aggregation, and tries to obtain a global optimum of the grid operation. A distribution grid with large penetration of highly varying generation or load is under the risk that the voltage quality...... delivered to the end users is very poor. Hence, a coordinated voltage control function is investigated given such control hierarchy utilizing the flexibilities from the DER units to obtain an optimal voltage profile along the distribution feeder. The results are two folded: the controller enables...

  17. Regulations on nuclear materials control of the People's Republic of China

    International Nuclear Information System (INIS)

    1996-01-01

    The present 'Regulations on Nuclear Materials Control of the People's Republic of China' were promulgated by the State Council on June 15, 1987, which are enacted to ensure safe and lawful use of nuclear materials, to prevent theft, sabotage, lose, unlawful diversion and unlawful use, to protect the security of the State and the Public and to facilitate the development of nuclear undertakings. The nuclear materials controlled are: 1. Uranium-235 (materials and products); 2. Uranium-233 (material and products); 3. Plutonium-239 (materials and products); 4. tritium (materials and products); 5. lithium-6 (materials and products); 6. Other nuclear materials requiring control. The present regulations are not applicable to the control of uranium ore and its primary products. The control measures for nuclear products transferred to the armed forces shall be laid down by the national defence department

  18. Management Control Systems and Strategy: A Resource based Perspective. Evidence from Greece

    OpenAIRE

    Nikolaos Theriou; Dimitrios Maditinos; Georgios N. Theriou

    2017-01-01

    Purpose: The purpose of this paper is to empirically examine from the resource-based perspective, the relationship between the use of management control systems (MCS) and organisational capabilities in the Greek context. Design/Methodology/Approach: The study follows Henri's (2006) methodology and explores the relationships between the diagnostic and interactive uses of performance measurement systems (PMS) and the five capabilities (e.g. market orientation, organisational learning, entrep...

  19. Green material composites from renewable resources: Polymorphic transitions and phase diagram of beeswax/rosin resin

    Energy Technology Data Exchange (ETDEWEB)

    Gaillard, Yves [Mines-ParisTech., CEMEF, UMR CNRS 7635, 1 rue Claude Daunesse 06904 Sophia Antipolis cedex (France); Mija, Alice [University of Nice-Sophia Antipolis, Thermokinetic Group, Laboratory of Chemistry of Organic and Metallic Materials C.M.O.M., 06108 Nice Cedex 2 (France); Burr, Alain; Darque-Ceretti, Evelyne; Felder, Eric [Mines-ParisTech., CEMEF, UMR CNRS 7635, 1 rue Claude Daunesse 06904 Sophia Antipolis cedex (France); Sbirrazzuoli, Nicolas, E-mail: sbirrazz@unice.fr [University of Nice-Sophia Antipolis, Thermokinetic Group, Laboratory of Chemistry of Organic and Metallic Materials C.M.O.M., 06108 Nice Cedex 2 (France)

    2011-07-10

    Highlights: {yields} Blends of Rosin and beeswax are studied by DSC, XRD, and optical microscopy. {yields} The first phase diagram beeswax/rosin is established. {yields} Polymorphic transitions are identified and appear to be highly related to rosin content. - Abstract: Rosin and beeswax are two complex natural materials presenting numerous applications in paints, adhesives, varnishes or inks. Melted, they are particularly interesting for their adhesion properties. This paper establishes the first phase diagram beeswax/rosin blends. A systematic approach using X-ray diffraction (XRD), differential scanning calorimetry (DSC) and polarised optical microscopy (POM) has been performed in order to describe the crystallographic structure and the thermal properties of two materials, beeswax and rosin, and their blends. Indeed, melting, softening and crystallisation temperatures, polymorphic transitions but also crystalline index has been investigated. The resulting phase diagram reveals a complex behaviour in terms of phase transformation and time-dependent phenomenon mainly representative of the complex composition of beeswax.

  20. Assessing extraterrestrial regolith material simulants for in-situ resource utilization based 3D printing

    OpenAIRE

    Goulas, A; Binner, JGP; Harris, RA; Friel, RJ

    2017-01-01

    This research paper investigates the suitability of ceramic multi-component materials, which are found on the Martian and Lunar surfaces, for 3D printing (aka Additive Manufacturing) of solid structures. 3D printing is a promising solution as part of the cutting edge field of future in situ space manufacturing applications. 3D printing of physical assets from simulated Martian and Lunar regolith was successfully performed during this work by utilising laser-based powder bed fusion equipment. ...

  1. Development of A Web-Based Information System for Material Inventory Control: The Case of An Automotive Company

    OpenAIRE

    Renjana Setyoandara Wibisono; Tanika D Sofianti; Setijo Awibowo

    2016-01-01

    Inventory control is controlling the materials movement to fulfill the requirements. The materials can from the direct and indirect materials. the indirect materials are the materials that cannot be calculated according to the bill of materials. Indirect materials need safety stocks, so the requirements can always be fulfilled, means it need the control and monitoring of their levels. To control the movement of the materials, each department have roles to control and information that need to ...

  2. Lab Manual & Resources for Materials Science, Engineering and Technology on CD-Rom

    Science.gov (United States)

    Jacobs, James A.; McKenney, Alfred E.

    2001-01-01

    The National Educators' Workshop (NEW:Update) series of workshops has been in existence since 1986. These annual workshops focus on technical updates and laboratory experiments for materials science, engineering and technology, involving new and traditional content in the field. Scores of educators and industrial and national laboratory personnel have contributed many useful experiments and demonstrations which were then published as NASA Conference Proceedings. This "out poring of riches" creates an ever-expanding shelf of valuable teaching tools for college, university, community college and advanced high school instruction. Now, more than 400 experiments and demonstrations, representing the first thirteen years of NEW:Updates have been selected and published on a CD-ROM, through the collaboration of this national network of materials educators, engineers, and scientists. The CD-ROM examined in this document utilizes the popular Adobe Acrobat Reader format and operates on most popular computer platforms. This presentation provides an overview of the second edition of Experiments in Materials Science, Engineering and Technology (EMSET2) CD-ROM, ISBN 0-13-030534-0.

  3. Diffusing wave spectroscopy applied to material analysis and process control

    International Nuclear Information System (INIS)

    Lloyd, Christopher James

    1997-01-01

    Diffusing Wave Spectroscopy (DWS) was studied as a method of laboratory analysis of sub-micron particles, and developed as a prospective in-line, industrial, process control sensor, capable of near real-time feedback. No sample pre-treatment was required and measurement was via a non-invasive, flexible, dip in probe. DWS relies on the concept of the diffusive migration of light, as opposed to the ballistic scatter model used in conventional dynamic light scattering. The specific requirements of the optoelectronic hardware, data analysis methods and light scattering model were studied experimentally and, where practical, theoretically resulting in a novel technique of analysis of particle suspensions and emulsions of volume fractions between 0.01 and 0.4. Operation at high concentrations made the technique oblivious to dust and contamination. A pure homodyne (autodyne) experimental arrangement described was resilient to environmental disturbances, unlike many other systems which utilise optical fibres or heterodyne operation. Pilot and subsequent prototype development led to a highly accurate method of size ranking, suitable for analysis of a wide range of suspensions and emulsions. The technique was shown to operate on real industrial samples with statistical variance as low as 0.3% with minimal software processing. Whilst the application studied was the analysis of TiO 2 suspensions, a diverse range of materials including polystyrene beads, cell pastes and industrial cutting fluid emulsions were tested. Results suggest that, whilst all sizing should be comparative to suitable standards, concentration effects may be minimised and even completely modelled-out in many applications. Adhesion to the optical probe was initially a significant problem but was minimised after the evaluation and use of suitable non stick coating materials. Unexpected behaviour in the correlation in the region of short decay times led to consideration of the effects of rotational diffusion

  4. 5 CFR 1312.26 - Control of secret and confidential material.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Control of secret and confidential... Accountability of Classified Information § 1312.26 Control of secret and confidential material. Classified... Document Control, will be used to establish accountability controls on all Secret material received or...

  5. Access Control Mechanism for IoT Environments Based on Modelling Communication Procedures as Resources

    OpenAIRE

    Luis Cruz-Piris; Diego Rivera; Ivan Marsa-Maestre; Enrique de la Hoz; Juan R. Velasco

    2018-01-01

    Internet growth has generated new types of services where the use of sensors and actuators is especially remarkable. These services compose what is known as the Internet of Things (IoT). One of the biggest current challenges is obtaining a safe and easy access control scheme for the data managed in these services. We propose integrating IoT devices in an access control system designed for Web-based services by modelling certain IoT communication elements as resources. This would allow us to o...

  6. Controlling healthcare professionals: how human resource management influences job attitudes and operational efficiency.

    Science.gov (United States)

    Cogin, Julie Ann; Ng, Ju Li; Lee, Ilro

    2016-09-20

    We assess how human resource management (HRM) is implemented in Australian hospitals. Drawing on role theory, we consider the influence HRM has on job attitudes of healthcare staff and hospital operational efficiency. We adopt a qualitative research design across professional groups (physicians, nurses, and allied health staff) at multiple levels (executive, healthcare managers, and employee). A total of 34 interviews were carried out and analyzed using NVivo. Findings revealed a predominance of a control-based approach to people management. Using Snell's control framework (AMJ 35:292-327, 1992), we found that behavioral control was the principal form of control used to manage nurses, allied health workers, and junior doctors. We found a mix between behavior, output, and input controls as well as elements of commitment-based HRM to manage senior physicians. We observed low levels of investment in people and a concentration on transactional human resource (HR) activities which led to negative job attitudes such as low morale and frustration among healthcare professionals. While hospitals used rules to promote conformity with established procedures, the overuse and at times inappropriate use of behavior controls restricted healthcare managers' ability to motivate and engage their staff. Excessive use of behavior control helped to realize short-term cost-cutting goals; however, this often led to operational inefficiencies. We suggest that hospitals reduce the profusion of behavior control and increase levels of input and output controls in the management of people. Poor perceptions of HR specialists and HR activities have resulted in HR being overlooked as a vehicle to address the strategic challenges required of health reform and to build an engaged workforce.

  7. Human Rights and Drug Control : Access to Controlled Essential Medicines in Resource-Constrained Countries

    NARCIS (Netherlands)

    Gispen, M.E.C.

    2017-01-01

    Millions of people worldwide suffer a range of health and socio-economic related problems because of inadequate availability and use of controlled essential medicines like morphine and codeine for pain treatment. As a result, millions of people, often living in lesser-advanced conditions, suffer in

  8. Material Protection, Control, and Accountancy (MPC and A) Sustainability

    International Nuclear Information System (INIS)

    Baumann, Mark; Farmer, James; Haase, Michael; Mann, Greg; Soo Hoo, Mark; Toth, William

    1999-01-01

    To date, the Department of Energy's (DOE) Material Protection, Control, and Accountancy (MPC and A) program has assisted in the implementation of operational site-wide MPC and A systems at several nuclear facilities in Russia. Eleven sites from the civilian sector have completed the site-wide installations and two have completed sub-site installations. By the end of 1999, several additional sites will have completed site-wide and sub-site system installations through DOE assistance. the effort at the completed sites has focused primarily on the design, integration, and installation of upgraded MPC and A systems. In most cases, little work has been performed to ensure that the installed systems will be sustained. Because of concerns that the installed systems would not be operated in the future, DOE established a sustainability pilot program involving the 11 sites. The purpose of DOE's MPC and A Sustainability Program is to ensure that MPC and A upgrades installed at sites in Russia are effective and will continue to operate over the long term. The program mission is to work with sites where rapid upgrades have been completed to cultivate enduring and consistent MPC and A practices. The program attempts to assist the Russian sites to develop MPC and A organizations that will operate, maintain, and continue to improve the systems and procedures. Future assistance will strive to understand and incorporate culturally sensitive approaches so that the sites take ownership for all MPC and A matters. This paper describes the efforts of the sustainability program to date

  9. Local system for control by console-mobile crane for russian depository of fissionable materials

    International Nuclear Information System (INIS)

    Troshchenko, V.G.; Kapustin, V.N.; Zinina, N.V.; Derbyshev, S.A.

    2005-01-01

    Description of crane of console-mobile type used for transportation of fissionable materials in depository with local control system is represented. Local control system realizes program control in real time [ru

  10. Air pollution, cardiovascular endpoints and susceptibility by stress and material resources: a systematic review of the evidence.

    Science.gov (United States)

    Fuller, Christina H; Feeser, Karla R; Sarnat, Jeremy A; O'Neill, Marie S

    2017-06-14

    Evidence shows that both the physical and social environments play a role in the development of cardiovascular disease. The purpose of this systematic review is two-fold: First, we summarize research from the past 12 years from the growing number of studies focused on effect modification of the relationships between air pollution and cardiovascular disease (CVD) outcomes by socioeconomic position (SEP) and; second, we identify research gaps throughout the published literature on this topic and opportunities for addressing these gaps in future study designs. We identified 30 articles that examined the modifying effects of either material resources or psychosocial stress (both related to SEP) on associations between short and long-term air pollution exposure and CVD endpoints. Although 18 articles identified at least one interaction between an air pollutant and material resource indicator, 11 others did not. Support for susceptibility to air pollution by psychosocial stress was weaker; however, only three articles tested this hypothesis. Further studies are warranted to investigate how air pollution and SEP together may influence CVD. We recommend that such research include thorough assessment of air pollution and SEP correlations, including spatial correlation; investigate air pollution indices or multi-pollutant models; use standardized metrics of SEP to enhance comparability across studies; and evaluate potentially susceptible populations.

  11. Linking material flow analysis and resource policy via future scenarios of in-use stock: an example for copper.

    Science.gov (United States)

    Gerst, Michael D

    2009-08-15

    A key aspect to achieving long-term resource sustainability is the development of methodologies that explore future material cycles and their environmental impact. Using a novel dynamic in-use stock model and scenario analysis, I analyzed the multilevel global copper cycle over the next 100 years. In 1990, the industrialized world had an in-use copper stock about twice as large as the developing world and a per capita in-use stock of about six times as large. By 2100, the developing world will have an in-use copper stock about three times as large as the industrialized world, but the industrialized world will maintain a per capita stock twice that of the developing world. Under a scenario of no material substitution or technological change in copper products, global in-use stock in 2100 will be about as large as currently known copper resources. However, current scrap recycling trends and exploration will alleviate absolute supply pressure but not environmental impacts from decreasing copper are grades. Additionally, unexpected emergent properties of dematerialization are observed from the in-use stock model that arise solely from the properties of stock dynamics, an infrequently discussed cause of dematerialization in the literature.

  12. Workshop summary: detection, impact, and control of specific pathogens in animal resource facilities.

    Science.gov (United States)

    Mansfield, Keith G; Riley, Lela K; Kent, Michael L

    2010-01-01

    Despite advances, infectious diseases remain a threat to animal facilities, continue to affect animal health, and serve as potential confounders of experimental research. A workshop entitled Detection, Impact, and Control of Specific Pathogens in Animal Resource Facilities was sponsored by the National Center for Research Resources (NCRR) and National Institutes of Aging (NIA) and held April 23-24, 2009, at the Lister Hill Conference Center on the National Institutes of Health's (NIH) Bethesda campus. The meeting brought together laboratory animal scientists and veterinarians with experience in fish, rodent, and nonhuman primate models to identify common issues and problems. Session speakers addressed (1) common practices and current knowledge of these species, (2) new technologies in the diagnosis of infectious diseases, (3) impact of environmental quality on infectious disease, (4) normal microbial flora in health and disease, (5) genetics and infectious disease, and (6) specific infectious agents and their impact on research. Attendees discussed current challenges and future needs, highlighting the importance of education and training, the funding of critical infrastructure and resource research, and the need for improved communication of disease risks and integration of these risks with strategic planning. NIH and NCRR have a strong record of supporting resource initiatives that have helped address many of these issues and recent efforts have focused on the building of consortium activities among such programs. This manuscript summarizes the presentations and conclusions of participants at the meeting; abstracts and a full conference report are available online (www.ncrr.nih.gov).

  13. Resource Supply Overrides Temperature as a Controlling Factor of Marine Phytoplankton Growth

    Science.gov (United States)

    Marañón, Emilio; Cermeño, Pedro; Huete-Ortega, María; López-Sandoval, Daffne C.; Mouriño-Carballido, Beatriz; Rodríguez-Ramos, Tamara

    2014-01-01

    The universal temperature dependence of metabolic rates has been used to predict how ocean biology will respond to ocean warming. Determining the temperature sensitivity of phytoplankton metabolism and growth is of special importance because this group of organisms is responsible for nearly half of global primary production, sustains most marine food webs, and contributes to regulate the exchange of CO2 between the ocean and the atmosphere. Phytoplankton growth rates increase with temperature under optimal growth conditions in the laboratory, but it is unclear whether the same degree of temperature dependence exists in nature, where resources are often limiting. Here we use concurrent measurements of phytoplankton biomass and carbon fixation rates in polar, temperate and tropical regions to determine the role of temperature and resource supply in controlling the large-scale variability of in situ metabolic rates. We identify a biogeographic pattern in phytoplankton metabolic rates, which increase from the oligotrophic subtropical gyres to temperate regions and then coastal waters. Variability in phytoplankton growth is driven by changes in resource supply and appears to be independent of seawater temperature. The lack of temperature sensitivity of realized phytoplankton growth is consistent with the limited applicability of Arrhenius enzymatic kinetics when substrate concentrations are low. Our results suggest that, due to widespread resource limitation in the ocean, the direct effect of sea surface warming upon phytoplankton growth and productivity may be smaller than anticipated. PMID:24921945

  14. Water Resources Research Program. Abatement of malodors at diked, dredged-material disposal sites. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, W.; Dravnieks, A.; Zussman, R.; Goltz, R.

    1976-06-01

    Samples of malodorous air and dredged material were collected at diked disposal sites at the following locations: Buffalo, NY; Milwaukee, WI; Mobile, AL; York Harbor, ME; Houston, TX; Detroit, MI; and Anacortes, WA; during the period July--October, 1975. Odorous compounds in the air samples were identified by gas chromatography/mass spectrometry, while the detection threshold, intensity, and character of the various odors were determined by experienced panelists using a dynamic, forced-choice-triangle olfactometer. Although significant problems with malodors were not observed beyond the disposal-area dikes during site visits, noteworthy odor episodes had occurred at some sites. An odor-abatement strategy is presented for handling the expected range of odor conditions at dredged-material disposal sites. Its aim is to reduce to an acceptable level the intensity of malodors in an affected community. The main steps in the strategy cover selection of the disposal site, site preparation, odor characterization of sediments to be dredged, malodor abatement during dredging and disposal operations, malodor abatement after filling of the disposal site, and the handling of malodor complaints.

  15. Sustainable Materials Management (SMM) Web Academy Webinar: Changing How We Think About Our Resources for a Better Tomorrow: How to Donate Surplus Food from K-12 Schools

    Science.gov (United States)

    This is a webinar page for the Sustainable Management of Materials (SMM) Web Academy webinar titled Changing How We Think About Our Resources for a Better Tomorrow: How to Donate Surplus Food from K-12 Schools

  16. A Cost Control Policy for Material Requirements Planning and ...

    African Journals Online (AJOL)

    It is sometimes difficult to predict that a particular material will be out of stock at a particular time. This uncertainty can be avoided by deriving a probability distribution of stock-out. Let us assume that the stock-out of material occur only at the end of a certain period, say t. This paper derives a probability distribution theory of ...

  17. International regulatory control of the transport of radioactive materials

    International Nuclear Information System (INIS)

    Swindell, G.E.

    1979-01-01

    The development of the IAEA regulations on the transport of radioactive materials and the background for the adoption of these regulations by the various international organizations responsible for regulating the different modes of international transport of hazardous materials is briefly discussed

  18. Accounting for and control of nuclear material at the Central Institute of Nuclear Research, Rossendorf

    International Nuclear Information System (INIS)

    Heidel, S.; Rossbander, W.; Helming, M.

    1983-01-01

    A survey is given of the system of accounting for and control of nuclear material at the Central Institute for Nuclear Research, Rossendorf. It includes 3 material balance areas. Control is implemented at both the institute and the MBA levels on the basis of concepts which are coordinated with the national control authority of the IAEA. The system applied enables national and international nuclear material control to be carried out effectively and economically at a minimum of interference with operational procedures. (author)

  19. Strategically oriented management and controlling of resource intensive projects; Strategieorientiertes Management und Controlling ressourcenintensiver Projekte. Fallstudienanalyse und Konzeption eines Referenzmodells zum Projektmanagement der Stilllegung kerntechnischer Anlagen

    Energy Technology Data Exchange (ETDEWEB)

    Kemmeter, Sascha

    2015-07-01

    The book on strategically oriented management and controlling of resource intensive projects covers the following issues: frame of project management and project controlling, classification of the decommissioning of nuclear facilities as resource intensive projects, research design for case studies, results of the study of project management specific characteristics of decommissioning, reference model for the project management of nuclear facility decommissioning.

  20. U.S. N.R.C. special safeguards study on nuclear material control and accounting

    International Nuclear Information System (INIS)

    Smith, G.D.

    1976-01-01

    In Feb. 1975, NRC directed that an effort be made to determine a safeguards program for Pu recycle. This paper summarizes results of individual contractor evaluations of upgrading material control and accounting concepts as applied to strategically important special nuclear material and describes staff interpretations of these results as applied to future high-throughput fuel-cycle facilities. Real-time material control, design for physical inventory, Pu isotopics control and calorimetry, and material control and accounting for highly enriched uranium fuel materials were the concepts studied. 1 table, 15 references