ABOUT INDEX EVALUATION OF MATERIAL RESOURCE SUPPLIER SELECTION

Directory of Open Access Journals (Sweden)

V. A. Skochinskaya

2008-01-01

Full Text Available The paper analyzes existing methods for evaluation of material resource supplier selection. It shows advantages and shortcomings of the present evaluation systems. The necessity for application of an index evaluation is justified in the paper. The paper contains rating (index evaluation for material resource supplier selection which is based on the application of quantitative (index tool instead of an expert (numerical evaluation. 

Resource Efficient Metal and Material Recycling

Science.gov (United States)

Reuter, Markus A.; van Schaik, Antoinette

Metals enable sustainability through their use and their recyclability. However, various factors can affect the Resource Efficiency of Metal Processing and Recycling. Some typical factors that enable Resource Efficiency include and arranged under the drivers of sustainability: Environment (Maximize Resource Efficiency — Energy, Recyclates, Materials, Water, Sludges, Emissions, Land); Economic Feasibility (BAT & Recycling Systems Simulation / Digitalization, Product vis-à-vis Material Centric Recycling); and Social — Licence to Operate (Legislation, consumer, policy, theft, manual labour.). In order to realize this primary production has to be linked systemically with typical actors in the recycling chain such as Original Equipment Manufacturers (OEMs), Recyclers & Collection, Physical separation specialists as well as process metallurgical operations that produce high value metals, compounds and products that recycle back to products. This is best done with deep knowledge of multi-physics, technology, product & system design, process control, market, life cycle management, policy, to name a few. The combination of these will be discussed as Design for Sustainability (DfS) and Design for Recycling (DfR) applications.

Resources of nuclear fuels and materials

Energy Technology Data Exchange (ETDEWEB)

Kawamura, K [Tokyo Inst. of Tech. (Japan); Kamiyama, Teiji; Hayashi, S; Hida, Noboru; Okano, T

1974-11-01

In this explanatory article, data on the world resources of nuclear fuels and materials, their production, and the present state of utilization are presented by specialists in varied fields. Main materials taken up are uranium, thorium, beryllium, zirconium, niobium, rare earth elements, graphite, and materials for nuclear fusion (heavy hydrogen and tritium). World reserves and annual production of these materials listed in a number of tables are cited from statistics of the period 1970-1973 or given by estimation. These data may be used as valuable numerical data for various projects and problems of atomic power industries.

Planning of resource maintenance at building of railway bridge

Directory of Open Access Journals (Sweden)

Klykov Michael

2017-01-01

Full Text Available The Publication contains the results of research on the problem of resources provision perfecting of erection processes of railway bridges including consideration of forecasting demand questions to material resources, formations of delivery schedules of materials and designs, definitions of insurance reserves in regards to suppliers of material and technical production.

Methods of evaluation of procurement of material resources

Directory of Open Access Journals (Sweden)

Dupina L.F.

2017-04-01

Full Text Available the researchers of this article analyze some questions concerning the choice of methods of material resources evaluation, types and elements of the evaluation, organization of effective accounting and analytical support of material and production resources of enterprises.

Materials compatibility considerations for a fusion-fission hybrid reactor design

International Nuclear Information System (INIS)

DeVan, J.H.; Tortorelli, P.F.

1983-01-01

The Tandem Mirror Hybrid Reactor is a fusion reactor concept that incorporates a fission-suppressed breeding blanket for the production of 233 U to be used in conventional fission power reactors. The present paper reports on compatibility considerations related to the blanket design. These considerations include solid-solid interactions and liquid metal corrosion. Potential problems are discussed relative to the reference blanket operating temperature (490 0 C) and the recycling time of breeding materials (<1 year)

Considerations on the Benefits of Using Recyclable Materials for Road Construction

Directory of Open Access Journals (Sweden)

Popescu Diana

2017-07-01

Full Text Available A current worldwide economy problem includes both the responsible management of the planet's non-renewable resources and the waste management. The benefits of using recyclable materials and recycling technologies with asphalt mixtures consist mainly of reducing fuel consumption and greenhouse gas emissions. It is well known that oil (from which bitumen is obtained is a non-renewable resource, hence the its price increase. Therefore, at present, the world is looking for solutions that will lead to a better use of natural resources and to an economic integration of sub-products from various industries. This paper intends to raise awareness of the possibilities for asphalt mixtures recycling and of the recyclable materials that can be used as additives with benefits of each.

Material and fabrication considerations for the CANDU-PHWR heat transport system

International Nuclear Information System (INIS)

Filipovic, A.; Price, E.G.; Barber, D.; Nickerson, J.

1987-03-01

CANDU PHWR nuclear systems have used carbon steel material for over 25 years. The accumulated operating experience of over 200 reactor years has proven this unique AECL approach to be both technically and economically attractive. This paper discusses design, material and fabrication considerations for out-reactor heat transport system major components. The contribution of this unique choice of materials and equipment to the outstanding CANDU performance is briefly covered

A Classification Scheme for Career Education Resource Materials.

Science.gov (United States)

Koontz, Ronald G.

The introductory section of the paper expresses its purpose: to devise a classification scheme for career education resource material, which will be used to develop the USOE Office of Career Education Resource Library and will be disseminated to interested State departments of education and local school districts to assist them in classifying…

Genetic resources as initial material for developing new soft winter wheat varieties

Directory of Open Access Journals (Sweden)

В. М. Кір’ян

2016-12-01

Full Text Available Purpose. To estimate genetic resources collection of soft winter wheat plants (new collection accessions of Ustymivka Experimental Station for Plant Production and select initial material for breeding of adaptive, productive and qualitative soft winter wheat varieties. Methods. Field experiment, laboratory testing. Results. The authors pre- sented results of study of over 1000 samples of gene pool of soft winter wheat from 25 countries during 2001–2005 in Ustymivka Experimental Station for Plant Production of Plant Production Institute nd. a. V. Ya. Yuriev, NAAS of Ukraine for a complex of economic traits. More than 400 new sources with high adaptive properties were selected that combine traits of high productivity and high quality of grain, early ripening, resistance to biotic and abiotic fac- tors (the assessment of samples for 16 valuable traits is given. The selected material comes from various agro-cli- matic zones, including zones of unsustainable agriculture. Conclusions. Recommended sources of traits that have breeding value will allow to enrich high-quality assortment of wheat and considerably accelerate breeding process du- ring development of new soft winter wheat varieties.

Materials considerations for the National Spallation Neutron Source target

International Nuclear Information System (INIS)

Mansur, L.K.; DiStefano, J.R.; Farrell, K.; Lee, E.H.; Pawel, S.J.; Wechsler, M.S.

1997-08-01

The National Spallation Neutron Source (NSNS), in which neutrons are generated by bombarding a liquid mercury target with 1 GeV protons, will place extraordinary demands on materials performance. The target structural material will operate in an aggressive environment, subject to intense fluxes of high energy protons, neutrons, and other particles, while exposed to liquid mercury and to water. Components that require special consideration include the Hg liquid target container and protective shroud, beam windows, support structures, moderator containers, and beam tubes. In response to these demands a materials R and D program has been developed for the NSNS that includes: selection of materials; calculations of radiation damage; irradiations, post irradiation testing, and characterization; compatibility testing and characterization; design and implementation of a plan for monitoring of materials performance in service; and materials engineering and technical support to the project. Irradiations are being carried out in actual and simulated spallation environments. Compatibility experiments in Hg are underway to ascertain whether the phenomena of liquid metal embrittlement and temperature gradient mass transfer will be significant. Results available to date are assessed in terms of the design and operational performance of the facility

Engineering solutions for sustainability materials and resources II

CERN Document Server

Mishra, Brajendra; Anderson, Dayan; Sarver, Emily; Neelameggham, Neale

2016-01-01

With impending and burgeoning societal issues affecting both developed and emerging nations, the global engineering community has a responsibility and an opportunity to truly make a difference and contribute. The papers in this collection address what materials and resources are integral to meeting basic societal sustainability needs in critical areas of energy, transportation, housing, and recycling. Contributions focus on the engineering answers for cost-effective, sustainable pathways; the strategies for effective use of engineering solutions; and the role of the global engineering community. Authors share perspectives on the major engineering challenges that face our world today; identify, discuss, and prioritize engineering solution needs; and establish how these fit into developing global-demand pressures for materials and human resources.

Sustainable prevention of resource conflicts. Conflict risks for access and use of raw materials (report 1); Rohstoffkonflikte nachhaltig vermeiden. Konfliktrisiken bei Zugang und Nutzung von Rohstoffen (Teilbericht 1)

Energy Technology Data Exchange (ETDEWEB)

Taenzler, Dennis; Westerkamp, Meike [Adelphi Research, Berlin (Germany); Supersberger, Nikolaus; Ritthoff, Michael; Bleischwitz, Raimund [Wuppertal Institut fuer Klima, Umwelt, Energie GmbH, Wuppertal (Germany)

2011-04-15

Inequalities of resources ownership and the consequences of the exploitation of non-renewable resources have always caused violent conflicts of varying intensity. The resulting interdependence between conflicts on the one hand and resources on the other hand - discussed here under the term of conflict-resources nexus - is complex and requires a detailed theoretical and conceptional assessment. The risks of conflict vary as a function of the constellations of actors and the existing political, economic and social boundary conditions. These risks are often globally linked and reflect the flow of resources between consumer countries, transit countries, and producer countries. Conflicts in producer countries may endanger the supply of raw materials to consumer countries. Whether the raw material is an energetic resource like natural gas, petroleum, or coal, or a non-energetic resource like coltane or copper: There are many who demand that Germany should adapt to stronger competition and shorter supply and should also be aware of the possibility of conflicts about raw materials. This part-report of the project 'Sustainable Prevention of Resource Conflicts' presents important theoretical and conceptional considerations on the risk of conflict in the raw materials sector. On this basis, further reports will present case studies, scenarios, and preventive strategies. (orig./RHM)

Raw materials resources classification and characterisation for ...

African Journals Online (AJOL)

Raw materials resources classification and characterisation for ceramic tableware production in Nigeria. PSA Irabor. Abstract. No Abstract. Journal of Applied Science, Engineering and Technology Vol. 2(1) 2002: 48-52. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

Entombment Using Cementitious Materials: Design Considerations and International Experience

Energy Technology Data Exchange (ETDEWEB)

Seitz, Roger Ray

2002-08-01

Cementitious materials have physical and chemical properties that are well suited for the requirements of radioactive waste management. Namely, the materials have low permeability and durability that is consistent with the time frame required for short-lived radionuclides to decay. Furthermore, cementitious materials can provide a long-term chemical environment that substantially reduces the mobility of some long-lived radionuclides of concern for decommissioning (e.g., C-14, Ni-63, Ni-59). Because of these properties, cementitious materials are common in low-level radioactive waste disposal facilities throughout the world and are an attractive option for entombment of nuclear facilities. This paper describes design considerations for cementitious barriers in the context of performance over time frames of a few hundreds of years (directed toward short-lived radionuclides) and time frames of thousands of years (directed towards longer-lived radionuclides). The emphasis is on providing an overview of concepts for entombment that take advantage of the properties of cementitious materials and experience from the design of low-level radioactive waste disposal facilities. A few examples of the previous use of cementitious materials for entombment of decommissioned nuclear facilities and proposals for the use in future decommissioning of nuclear reactors in a few countries are also included to provide global perspective.

Entombment Using Cementitious Materials: Design Considerations and International Experience

Energy Technology Data Exchange (ETDEWEB)

Seitz, R.R.

2002-05-15

Cementitious materials have physical and chemical properties that are well suited for the requirements of radioactive waste management. Namely, the materials have low permeability and durability that is consistent with the time frame required for short-lived radionuclides to decay. Furthermore, cementitious materials can provide a long-term chemical environment that substantially reduces the mobility of some long-lived radionuclides of concern for decommissioning (e.g., C-14, Ni-63, Ni-59). Because of these properties, cementitious materials are common in low-level radioactive waste disposal facilities throughout the world and are an attractive option for entombment of nuclear facilities. This paper describes design considerations for cementitious barriers in the context of performance over time frames of a few hundreds of years (directed toward short-lived radionuclides) and time frames of thousands of years (directed towards longer-lived radionuclides). The emphasis is on providing a n overview of concepts for entombment that take advantage of the properties of cementitious materials and experience from the design of low-level radioactive waste disposal facilities. A few examples of the previous use of cementitious materials for entombment of decommissioned nuclear facilities and proposals for the use in future decommissioning of nuclear reactors in a few countries are also included to provide global perspective.

Entombment Using Cementitious Materials: Design Considerations and International Experience

International Nuclear Information System (INIS)

Seitz, R.R.

2002-01-01

Cementitious materials have physical and chemical properties that are well suited for the requirements of radioactive waste management. Namely, the materials have low permeability and durability that is consistent with the time frame required for short-lived radionuclides to decay. Furthermore, cementitious materials can provide a long-term chemical environment that substantially reduces the mobility of some long-lived radionuclides of concern for decommissioning (e.g., C-14, Ni-63, Ni-59). Because of these properties, cementitious materials are common in low-level radioactive waste disposal facilities throughout the world and are an attractive option for entombment of nuclear facilities. This paper describes design considerations for cementitious barriers in the context of performance over time frames of a few hundreds of years (directed toward short-lived radionuclides) and time frames of thousands of years (directed towards longer-lived radionuclides). The emphasis is on providing a n overview of concepts for entombment that take advantage of the properties of cementitious materials and experience from the design of low-level radioactive waste disposal facilities. A few examples of the previous use of cementitious materials for entombment of decommissioned nuclear facilities and proposals for the use in future decommissioning of nuclear reactors in a few countries are also included to provide global perspective

Program-oriented approach to resource saving issues in construction materials industry

Directory of Open Access Journals (Sweden)

Novikova Galina

2017-01-01

Full Text Available The construction as a sector of the economy is one of the largest consumers of energy resources, and the building materials industry is today one of the most energy-intensive construction industry. At the enterprises of the building materials industry the different approaches and methods are used to solve resource and energy problems. Energy saving is considered not as an complex approach in the enterprise activity, but as activity for the implementation of specific energy-saving projects, which have limitations in time and in resources. The authors suggest to use a softwareoriented approach to solving the problems of resource and energy saving. For practical application of program-oriented approach we offer to use a structuring method of the decision-making, not previously used to solve problems of resource and energy saving.

Food Processing Curriculum Material and Resource Guide.

Science.gov (United States)

Louisiana State Dept. of Education, Baton Rouge.

Intended for secondary vocational agriculture teachers, this curriculum guide contains a course outline and a resource manual for a seven-unit food processing course on meats. Within the course outline, units are divided into separate lessons. Materials provided for each lesson include preparation for instruction (student objectives, review of…

Methodical Approach to Managing Resources at an Industrial Enterprise

Directory of Open Access Journals (Sweden)

Antonets Olga O.

2013-11-01

Full Text Available The goal of the article lies in identification of optimal ways of managing material resources of an industrial enterprise on the basis of economic and mathematical modelling. In the process of analysis and systematisation of works of foreign and domestic scientists the article makes a conclusion about the insufficient degree of development of such complex solutions on formation of logistic systems of resource management, which would be simple and adaptive. The article provides results of the study of specific features of resource management at enterprises, among which – surplus (deficit of resources and availability of non-liquid reserves. In order to eliminate shortcomings the article offers a situational order of management with consideration of a possible state of reserves. The article improves the model of selection of the volume of supply of material resources and identifies optimal solutions with consideration of interval uncertainty. The further direction of the study lies in integration of the proposed approach to resource management with the system of financial planning at an industrial enterprise.

Reference material systems: a sourcebook for material assessment

Energy Technology Data Exchange (ETDEWEB)

Bhagat, N. (ed.)

1976-12-01

A reference set of data related to material systems and a framework for carrying out the material technologies assessment are presented. While the bulk of renewables have been considered in this report, the nonrenewable materials dealt with here include structural materials only, such as steel, aluminum, cement and concrete, and bricks. The complete data set is supposed to include material flows, energy requirements, capital and labor inputs, and environmental effects for each process that a resource must go through to become a useful material for an end use. Although effort has been made to obtain as much information as possible, considerable gaps in data, apparent throughout this report, could not be avoided. A new material technology can be evaluated by substituting that technology for appropriate elements of the reference materials system and calculating the net change in material resource, energy, capital and labor requirements, and environmental impacts. This combination of information thus serves as a means of evaluating the potential benefits to be gained by research in various material technologies.

Material Considerations for Fused-Filament Fabrication of Solid Dosage Forms

Directory of Open Access Journals (Sweden)

Evert Fuenmayor

2018-04-01

Full Text Available Material choice is a fundamental consideration when it comes to designing a solid dosage form. The matrix material will ultimately determine the rate of drug release since the physical properties (solubility, viscosity, and more of the material control both fluid ingress and disintegration of the dosage form. The bulk properties (powder flow, concentration, and more of the material should also be considered since these properties will influence the ability of the material to be successfully manufactured. Furthermore, there is a limited number of approved materials for the production of solid dosage forms. The present study details the complications that can arise when adopting pharmaceutical grade polymers for fused-filament fabrication in the production of oral tablets. The paper also presents ways to overcome each issue. Fused-filament fabrication is a hot-melt extrusion-based 3D printing process. The paper describes the problems encountered in fused-filament fabrication with Kollidon® VA64, which is a material that has previously been utilized in direct compression and hot-melt extrusion processes. Formulation and melt-blending strategies were employed to increase the printability of the material. The paper defines for the first time the essential parameter profile required for successful 3D printing and lists several pre-screening tools that should be employed to guide future material formulation for the fused-filament fabrication of solid dosage forms.

IMPROVING THE ORGANIZATION RATIONING OF MATERIAL RESOURCES IN AN INDUSTRIAL PLANT

Directory of Open Access Journals (Sweden)

N. V. Baturova

2010-01-01

Full Text Available Main directions to be followed to improve the material resources rationing system at an industrial enterprise are discussed. Particular attention should be paid to factors that determine utilization efficiency of the resources.

The status of human and material resources used in teaching ...

African Journals Online (AJOL)

The study explored the status of human and material resources used in teaching biology in public schools in Ilorin. A descriptive survey method was adopted. All senior school students in Ilorin constituted the population, out of which 20 secondary schools were randomly selected. A checklist tagged Inventory of Resources ...

[Research on resources chemistry of Chinese medicinal materials and resources recycling utilization ways and goals and tasks].

Science.gov (United States)

Duan, Jin-ao; Su, Shu-lan; Guo, Sheng; Jiang, Shu; Liu, Pei; Yan, Hui; Qian, Da-wei; Zhu, Hua-xu; Tang, Yu-ping; Wu, Qi-nan

2015-09-01

The objects of research on the resources chemistry of Chinese medicinal materials (RCCMM) are promotion of efficient production, rational utilization and improving quality of CMM and natural products. The development of TCM cause depends on the efficient utilization and sustainable development of CMM, hinges on the technologies and methods for using and discovering medicinal biological resources, stand or fall on the extension of industy chains, detailed utilizaion of resource chemical components by multi-way, multi-level. All of these may help to the recycling utilization and sound development of RCMM. In this article, five respects were discussed to the RCCMM researches and resources recycling utilization ways and goals and tasks. First, based on the principle of resource scarcity, discovering or replacing CMM resources, protecting the rare or endangered species or resources. Second, based on the multifunctionality of CMM, realizing the value-added and value compensation, and promoting the utilization efficiency through systermatic and detailed exploitation and utilization. Third, based on the resource conservation and environment-friendly, reducing raw material consumption, lowering cost, promoting recycling utilization and elevating utilization efficiency. Fourth, based on the stratege of turning harm into good, using the invasive alien biological resources by multi-ways and enriching the medicial resources. Fifth, based on the method of structure modification of chemical components, exploring and enhancing the utility value of resouces chemical substances. These data should provide references and attention for improving the utilization efficiency, promoting the development of recycling economy, and changing the mode of economic growth of agriculture and industry of CMM fundamentally.

Plant oil renewable resources as green alternatives in polymer science

NARCIS (Netherlands)

Meier, M.A.R.; Metzger, J.O.; Schubert, U.S.

2007-01-01

The utilization of plant oil renewable resources as raw materials for monomers and polymers is discussed and reviewed. In an age of increasing oil prices, global warming and other environmental problems (e.g. waste) the change from fossil feedstock to renewable resources can considerably contribute

Integrating resource efficiency and EU State aid. An evaluation of resource efficiency considerations in the current EU State aid framework

Energy Technology Data Exchange (ETDEWEB)

Bennink, D.; Faber, J.; Smit, M. [CE Delft, Delft (Netherlands); Goba, V. [SIA Estonian, Latvian and Lithuanian Environment ELLE, Tallinn (Estonia); Miller, K.; Williams, E. [AEA Technology plc, London (United Kingdom)

2012-10-15

This study, for the European Commission, analyses the issues that need to be addressed in the revision of the EU State aid framework to ensure that they do not hinder environmental, resource efficiency and sustainable development goals. In some cases, State aid can be considered an environmentally harmful subsidy (EHS). The study analyses (1) the extent to which the Environmental Aid Guidelines (EAG) need to be changed to take into account recent European environmental policy developments; (2) existing and potential resource efficiency considerations in a) the Regional Aid Guidelines; b) the Research, Development and Innovation (RDI) Guidelines and c) the Agriculture and Forestry Guidelines; assesses cases and schemes using these guidelines to identify whether resource efficiency considerations are taken into account. The study also considers the social, environmental and economic impacts of these cases and schemes. It develops recommendations for the review of the EAG and a number of horizontal guidelines. One of the conclusions of the analysis is that the way in which multiple objectives and impacts are balanced, when deciding to approve state aid, is unclear. Also, EU member states are not required to provide information on certain types of (estimated) impacts. To guarantee that multiple objectives and impacts are sufficiently balanced, it is recommended that the State aid framework prescribes that applicants identify social, economic and environmental objectives and impacts and describe how these are taken into account in the procedure of balancing multiple (conflicting) objectives. Objectives and impacts should be quantified as much as possible, for example by making use of the method of external cost calculation laid down in 'the Handbook on estimation of external costs in the transport Sector'. The results of the study are used by the European Commission as an input for evaluating and improving the EU State aid framework.

Integrating resource efficiency and EU State aid. An evaluation of resource efficiency considerations in the current EU State aid framework

Energy Technology Data Exchange (ETDEWEB)

Bennink, D.; Faber, J.; Smit, M. [CE Delft, Delft (Netherlands); Goba, V. [SIA Estonian, Latvian and Lithuanian Environment ELLE, Tallinn (Estonia); Miller, K.; Williams, E. [AEA Technology plc, London (United Kingdom)

2012-10-15

This study, for the European Commission, analyses the issues that need to be addressed in the revision of the EU State aid framework to ensure that they do not hinder environmental, resource efficiency and sustainable development goals. In some cases, State aid can be considered an environmentally harmful subsidy (EHS). The study analyses (1) the extent to which the Environmental Aid Guidelines (EAG) need to be changed to take into account recent European environmental policy developments; (2) existing and potential resource efficiency considerations in a) the Regional Aid Guidelines; b) the Research, Development and Innovation (RDI) Guidelines and c) the Agriculture and Forestry Guidelines; assesses cases and schemes using these guidelines to identify whether resource efficiency considerations are taken into account. The study also considers the social, environmental and economic impacts of these cases and schemes. It develops recommendations for the review of the EAG and a number of horizontal guidelines. One of the conclusions of the analysis is that the way in which multiple objectives and impacts are balanced, when deciding to approve state aid, is unclear. Also, EU member states are not required to provide information on certain types of (estimated) impacts. To guarantee that multiple objectives and impacts are sufficiently balanced, it is recommended that the State aid framework prescribes that applicants identify social, economic and environmental objectives and impacts and describe how these are taken into account in the procedure of balancing multiple (conflicting) objectives. Objectives and impacts should be quantified as much as possible, for example by making use of the method of external cost calculation laid down in 'the Handbook on estimation of external costs in the transport Sector'. The results of the study are used by the European Commission as an input for evaluating and improving the EU State aid framework.

Material resources availability, parent subject perception and school ...

African Journals Online (AJOL)

Students' poor performance in the Yoruba language is being considered a serious problem by researchers and education stakeholders. Despite their efforts, no appreciable improvement is noticeable for hardly are enough researches on the extent to which school material resources availability, parental subject perception ...

Considerations for Disposition of Dry Cask Storage System Materials at End of Storage System Life

International Nuclear Information System (INIS)

Howard, Rob; Van den Akker, Bret

2014-01-01

Dry cask storage systems are deployed at nuclear power plants for used nuclear fuel (UNF) storage when spent fuel pools reach their storage capacity and/or the plants are decommissioned. An important waste and materials disposition consideration arising from the increasing use of these systems is the management of the dry cask storage systems' materials after the UNF proceeds to disposition. Thermal analyses of repository design concepts currently under consideration internationally indicate that waste package sizes for the geologic media under consideration may be significantly smaller than the canisters being used for on-site dry storage by the nuclear utilities. Therefore, at some point along the UNF disposition pathway, there could be a need to repackage fuel assemblies already loaded into the dry storage canisters currently in use. In the United States, there are already over 1650 of these dry storage canisters deployed and approximately 200 canisters per year are being loaded at the current fleet of commercial nuclear power plants. There is about 10 cubic meters of material from each dry storage canister system that will need to be dispositioned. The concrete horizontal storage modules or vertical storage overpacks will need to be reused, re-purposed, recycled, or disposed of in some manner. The empty metal storage canister/cask would also have to be cleaned, and decontaminated for possible reuse or recycling or disposed of, likely as low-level radioactive waste. These material disposition options can have impacts of the overall used fuel management system costs. This paper will identify and explore some of the technical and interface considerations associated with managing the dry cask storage system materials. (authors)

Materials Development in the Colombian Context: Some Considerations About Its Benefits and Challenges

Directory of Open Access Journals (Sweden)

Bertha Ramos Holguín

2014-10-01

Full Text Available Materials development is a field of study which has recently acquired significant importance in the Colombian context due to the fact that teachers, as materials developers, consider materials development as an area of knowledge that helps them to improve their teaching practices. However, the rationale, the gains as well as the challenges that drive materials designers have not been explored enough in Colombia. This article aims to provide some general considerations about the benefits teachers, as material developers, will obtain and some of the shortcomings which may emerge along this process. Finally, the authors discuss some implications for teachers, students, and teacher education programs.

Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials. Supplement 34, 1988.

Science.gov (United States)

Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

The Environmental Quality Instructional Resources Center in Columbus, Ohio, acquires, reviews, indexes, and announces both print (books, modules, units, etc.) and non-print (films, slides, video tapes, etc.) materials related to water quality and water resources education and instruction. In addition some materials related to pesticides, hazardous…

Water Quality Instructional Resources Information System (IRIS): A Compilation of Abstracts to Water Quality and Water Resources Materials. Supplement 32, 1987.

Science.gov (United States)

Ohio State Univ., Columbus, OH. Information Reference Center for Science, Mathematics, and Environmental Education.

The Environmental Quality Instructional Resources Center in Columbus, Ohio, acquires, reviews, indexes, and announces both print (books, modules, units, etc.) and non-print (films, slides, video tapes, etc.) materials related to water quality and water resources education and instruction. In addition some materials related to pesticides, hazardous…

The Trope Tank: A Laboratory with Material Resources for Creative Computing

Directory of Open Access Journals (Sweden)

Nick Montfort

2014-12-01

Full Text Available http://dx.doi.org/10.5007/1807-9288.2014v10n2p53 Principles for organizing and making use of a laboratory with material computing resources are articulated. This laboratory, the Trope Tank, is a facility for teaching, research, and creative collaboration and offers hardware (in working condition and set up for use from the 1970s, 1980s, and 1990s, including videogame systems, home computers, and an arcade cabinet. To aid in investigating the material history of texts, the lab has a small 19th century letterpress, a typewriter, a print terminal, and dot-matrix printers. Other resources include controllers, peripherals, manuals, books, and software on physical media. These resources are used for teaching, loaned for local exhibitions and presentations, and accessed by researchers and artists. The space is primarily a laboratory (rather than a library, studio, or museum, so materials are organized by platform and intended use. Textual information about the historical contexts of the available systems, and resources are set up to allow easy operation, and even casual use, by researchers, teachers, students, and artists.

Human Resource Management: Some Vital Considerations

OpenAIRE

Mishra, SK

2007-01-01

The paper discusses how and why the theories of neo-classical economics are inadequate to provide a framework to human resource management and therefore must give way to dynamic gradual optimization procedure based on the principles of bounded rationality and satisficing behaviour in dealing with the problems of an adaptive complex system of business organization. It also widens the scope of human resource management to include crowd-sourcing.

Mining and sustainable development: Considerations for minerals supply

International Nuclear Information System (INIS)

Lambert, Ian B.

2001-01-01

Sustainable development involves meeting the needs of human societies while maintaining viable biological and physical Earth systems. The needs include minerals: metals, fuels, industrial and construction materials. There will continue to be considerable demand for virgin mineral resources, even if levels of recycling and efficiency of use are optimal, and rates of population growth and globalisation decrease significantly. This article aims to stimulate debate on strategic issues for minerals supply. While the world has considerable stocks of mineral resources overall, international considerations of the environmental and social aspects of sustainable development are beginning to result in limitations on where mining will be conducted and what types of deposits will be mined. Current and emerging trends favour large mines in parts of the world where mining can be conducted within acceptable limits of environmental and social impact. Finding new deposits that meet such criteria will be all the more challenging given a disturbing global decline in the rate of discovery of major economic resources over the last decade, and the decreasing land area available for exploration and mining. To attract responsible exploration and mining, governments and mining nations will need to provide: regional-scale geo-scientific datasets as required to attract and guide future generations of exploration; resource access through multiple and sequential land use regimes, and frameworks for dealing with indigenous peoples' issues; and arrangements for consideration of mining proposals and regulation of mines that ensure responsible management of environmental and social issues. The minerals industry will need to continue to pursue advances in technologies for exploration, mining, processing, waste management and rehabilitation, and in public reporting of environmental and social performance. (author)

Quality assurance and reference material requirements and considerations for environmental sample analysis in nuclear forensics

International Nuclear Information System (INIS)

Swindle, D.W. Jr.; Perrin, R.E.; Goldberg, S.A.; Cappis, J.

2002-01-01

Full text: High-sensitivity nuclear environmental sampling and analysis techniques have been proven in their ability to verify declared nuclear activities, as well as to assist in the detection of undeclared nuclear activities and facilities. Following the Gulf War, the capability and revealing power of environmental sampling and analysis techniques to support international safeguards was demonstrated and subsequently adopted by the International Atomic Energy Agency (IAEA) as routine safeguards measures in safeguards inspections and verifications. In addition to having been proved useful in international safeguards, environmental sampling and analysis techniques have demonstrated their utility in identifying the origins of 'orphaned' nuclear material, as well as the origin of intercepted smuggled nuclear material. Today, environmental sampling and analysis techniques are now being applied in six broad areas to support nonproliferation, disarmament treaty verification, national and international nuclear security, and environmental stewardship of weapons production activities. Consequently, more and more laboratories around the world are establishing capabilities or expanding capabilities to meet these growing applications, and as such requirements for quality assurance and control are increasing. The six areas are: 1) Nuclear safeguards; 2) Nuclear forensics/illicit trafficking; 3) Ongoing monitoring and verification (OMV); 4) Comprehensive Test Ban Treaty (CTBT); 5) Weapons dismantlement/materials disposition; and 6) Research and development (R and D)/environmental stewardship/safety. Application of environmental sampling and analysis techniques and resources to illicit nuclear material trafficking, while embodying the same basic techniques and resources, does have unique requirements for sample management, handling, protocols, chain of custody, archiving, and data interpretation. These requirements are derived from needs of how data from nuclear forensics

Resource Directory of Hispanic Educational Materials on Child Abuse Prevention.

Science.gov (United States)

Hill, Nancy; And Others

This annotated resource directory lists brochures, booklets, audiovisual materials, charts, and other educational materials, most of which are available in both English and Spanish, that address the following issues: (1) child abuse; (2) child development; (3) parenting skills; (4) mental health; (5) self-esteem; (6) stress management; (7) family…

Considerations in recycling contaminated scrap metal and rubble

International Nuclear Information System (INIS)

Kluk, A.F.; Hocking, E.K.

1992-01-01

Management options for the Department of Energy's increasing amounts of contaminated scrap metal and rubble include reuse as is, disposal, and recycling. Recycling, with its promise of resource recovery, virgin materials conservation, and land disposal minimization, emerges as a preferred management technique. Implementing a cost effective recycling program requires resolution of several issues including: establishing release limits for contaminants, controlling use of recycled materials creating effective public communication programs; developing economical, reliable assay technologies; managing secondary waste streams, expanding availability of unrestricted markets; and solving conflicting legal considerations

Insulating materials from renewable raw materials. 4. ed.; Daemmstoffe aus nachwachsenden Rohstoffen

Energy Technology Data Exchange (ETDEWEB)

Brandhorst, Joerg; Spritzendorfer, Josef; Gildhorn, Kai; Hemp, Markus

2012-03-27

The thermal insulation has become a central issue in the construction and renovation of buildings. The question of healthy building materials and appropriate construction follows the desire of a comfartable and allergy-free living. Due to these developments, insulation materials from renewable resources increasingly has raised the consciousness. The brochure under consideration describes the dynamic market of insulation materials consisting of renewable raw materials. Wood fibers, wood wool, sheep wool, flax, hemp, reeds, meadow grass, cork, cellulose, seaweed and bulrushes are considered as renewable raw materials for insulating materials.

Crime and Control: Syllabi and Instructional Materials for Criminology and Criminal Justice. Resource Materials for Teaching.

Science.gov (United States)

Deutschmann, Linda B., Ed.; Wright, Richard A., Ed.

One of a series of resources for teaching sociology at the postsecondary level, this volume contains syllabi and instructional materials for courses in criminology and criminal justice. Material is divided into four sections. Section 1, innovative approaches to the teaching of criminology, contains four papers which discuss a corrections practicum…

Materials Synthesis Of Barium Hexa ferrite Used Local Natural Resources

International Nuclear Information System (INIS)

Ridwan; Sulungbudi, Grace Tj.; Mujamilah

2003-01-01

The magnetic materials of barium hexa ferrites, Ba O.6Fe 2 O 3 successfully synthesized by powder metallurgy method used local natural resources from materials waste of steel fabrication (HSM, CRM), waste of polymer fabrication (LK) as well as iron sands (PBA). These waste as well as iron sands were the main resources of iron oxide, Fe 2 O 3 . The barium oxide used in this experiments are from BaCO 3 product of Merck, and BaCO 4 which is commercially available in the market as barite. Phase identification by x-ray diffraction technique show the synthesized magnetic materials are agreed with the available commercial product, (SUMI). The energy product maximum (BH) max measured by vibrating sample magnetometer (VSM) for the samples used HSM-, CRM- and BaCO 3 as basic materials are 1.141 MGOe and 1.136 MGOe while SUMI is 1.142 MGOe. However for the samples made from LK-, PBA- used of BaCO 3 or CRM- with barite, the energy product maximum (BH) max are relatively lower than commercial product

Rice Hulls as a Renewable Complex Material Resource

Directory of Open Access Journals (Sweden)

Irina Glushankova

2018-05-01

Full Text Available As a result of rice grain processing, a big amount of waste (up to 20% is produced. It is mainly rice hulls. The main components of rice hulls are cellulose, lignin and mineral ash. The mineral ash quantity in rice hulls varies from 15 up to 20%, by weight of the rice hulls. The mineral ash consists of amorphous silica (opal-type. Due to the high content of silica in rice hulls, the material burns with difficulty under natural conditions, and it is biodegradably destroyed only with difficulty, when composted. Utilization of rice hulls then becomes an ecological problem due to huge rice production and its continuous growth. At the same time, the annual quantity of silica content in rice hulls is comparable with the quantity of amorphous silica produced as a mineral resource. The issue of manufacturing cellular glass silica construction materials from rice hulls as a renewable resource is discussed in this paper. The utilization technology is based on an amorphous silicon oxide with the use of energy from the combustion of the organic component of rice hulls.

Decision making model for the recovery of useful material resources from wastes

International Nuclear Information System (INIS)

Rising, K.H.; Jensen, G.A.; FitzPatrick, V.F.

1982-06-01

In the United States, many of the material resources necessary for energy production are imported. Strategic stockpiling of these resources has been a well-known method for reducing the economic and productivity impact of supply interruption in case of emergency. Another viable option is the recovery of valuable materials and recycle of useful products from wastes generated in energy production and industrial processing. The technical feasibility for recovery and recycle, including decontamination of nuclear-related materials, has been proven and demonstrated. The economic feasibility would depend on both the resale and strategic values of the material, the saving from reusing rather than disposing of the material, the reclamation cost, and other factors that may influence the incentive for recovery and recycle. The purpose of the work presented in this paper is to develop a model to identify the economic and other incentives for the reclamation of useful material resources. Using available data to quantify factors such as strategic and resale values, reclamation cost and disposal cost saving, this model calculates the incentive value consisting of the above factors and selects the appropriate reclamation option. Because this model is empirical, there are limitations to its application. However, within the boundary where the model has been tested, it can be a useful tool for the decision maker to evaluate the economic feasibility of reclamation

Resource planning of solid waste materials through process modelling as contribution to sustainable resource management; Ressourcenplanung fester Abfallstoffe mit Hilfe der Prozessmodellierung als Beitrag zum nachhaltigen Ressourcenmanagement

Energy Technology Data Exchange (ETDEWEB)

Pehlken, Alexandra [Bremen Univ. (Germany). BIK, Institut fuer integrierte Produktentwicklung

2010-10-15

Raw materials are essential to satisfy our needs in energy and products. Many raw materials are restricted and far away from being endless available; therefore there is a strong intention of developing raw material- and energy-efficient production processes. Recycling processes provide a substantial contribution to sustainable resource management due to the supply of valuable secondary raw materials for new applications. Processing solid waste materials generate new secondary resources from residues as resources for new products. This saves primary resources and keeps up a long material life cycle. But material characterisation is an important issue to look at. Material properties ascertain the following application possibilities. It has to be noted that no processing technique can guarantee solely material flows with properties to substitute primary raw materials. There are always material flows that are of minor quality. This makes it difficult to assess the future potential of secondary raw materials to be available for following applications with specific quality demands. (orig.)

Mainstreaming Climate Change: Recent and Ongoing Efforts to Understand, Improve, and Expand Consideration of Climate Change in Federal Water Resources Planning

Science.gov (United States)

Ferguson, I. M.; McGuire, M.; Broman, D.; Gangopadhyay, S.

2017-12-01

The Bureau of Reclamation is a Federal agency tasked with developing and managing water supply and hydropower projects in the Western U.S. Climate and hydrologic variability and change significantly impact management actions and outcomes across Reclamation's programs and initiatives, including water resource planning and operations, infrastructure design and maintenance, hydropower generation, and ecosystem restoration, among others. Planning, design, and implementation of these programs therefore requires consideration of future climate and hydrologic conditions will impact program objectives. Over the past decade, Reclamation and other Federal agencies have adopted new guidelines, directives, and mandates that require consideration of climate change in water resources planning and decision making. Meanwhile, the scientific community has developed a large number of climate projections, along with an array of models, methods, and tools to facilitate consideration of climate projections in planning and decision making. However, water resources engineers, planners, and decision makers continue to face challenges regarding how best to use the available data and tools to support major decisions, including decisions regarding infrastructure investments and long-term operating criteria. This presentation will discuss recent and ongoing research towards understanding, improving, and expanding consideration of climate projections and related uncertainties in Federal water resources planning and decision making. These research efforts address a variety of challenges, including: How to choose between available climate projection datasets and related methods, models, and tools—many of which are considered experimental or research tools? How to select an appropriate decision framework when design or operating alternatives may differ between climate scenarios? How to effectively communicate results of a climate impacts analysis to decision makers? And, how to improve

Technology assessment of solar-energy systems. Materials resource and hazardous materials impacts of solar deployment

Science.gov (United States)

Schiffman, Y. M.; Tahami, J. E.

1982-04-01

The materials-resource and hazardous-materials impacts were determined by examining the type and quantity of materials used in the manufacture, construction, installation, operation and maintenance of solar systems. The materials requirements were compared with US materials supply and demand data to determine if potential problems exist in terms of future availability of domestic supply and increased dependence on foreign sources of supply. Hazardous materials were evaluated in terms of public and occupational health hazards and explosive and fire hazards. It is concluded that: although large amounts of materials would be required, the US had sufficient industrial capacity to produce those materials; (2) postulated growth in solar technology deployment during the period 1995-2000 could cause some production shortfalls in the steel and copper industry; the U.S. could increase its import reliance for certain materials such as silver, iron ore, and copper; however, shifts to other materials such as aluminum and polyvinylchloride could alleviate some of these problems.

Improving the Status of Human and Material Resources in Public ...

African Journals Online (AJOL)

Improving the Status of Human and Material Resources in Public Primary School in Oyo States ... the Millennium Development Goals project in the State. ... libraries, well-equipped first aid centres, adequate electronically projected instructional ...

Materials in world perspective. Assessment of resources, technologies and trends for key materials industries

Energy Technology Data Exchange (ETDEWEB)

Altenpohl, D G

1980-01-01

This book deals with the entire materials cycle - from extraction or harvesting to processing, manufacture, use, and reuse or disposal. It covers the present status and ongoing developments in six key materials industries in both industrialized and developing countries. Techno-economics trends, which are recognizable today, as well as important changes taking place from the mine through the refining stage on to finished products, are outlined. The 'problem triangle' of the materials industry - basic or raw materials, ecology and energy - is discussed. Of specific importance are the impacts which a given material or technology can have on the environment. Methods of assessing these impacts, which should be integrated into overall technology planning by the materials industry, are described. This book discusses resources, industry's social responsibilities and limits-to-growth. An explanation is given for opposing views on constraints and growth, not only for the materials industry, but also for the automotive and packaging industries. Thus, this book spotlights the interaction between different fields of technology and their interrelationship with and between different regions on Earth.

Housing Quality and Access to Material and Learning Resources within the Home Environment in Developing Countries

Science.gov (United States)

Bradley, Robert H.; Putnick, Diane L.

2012-01-01

This study examined home environment conditions (housing quality, material resources, formal and informal learning materials) and their relations with the Human Development Index (HDI) in 28 developing countries. Home environment conditions in these countries varied widely. The quality of housing and availability of material resources at home were…

The global resource balance table, an integrated table of energy, materials and the environment

International Nuclear Information System (INIS)

Tsuchiya, Haruki

2013-01-01

This paper introduces the Global Resource Balance Table (GRBT), which is an extension of the energy balance tables that expresses the relationships between energy, materials and the environment. The material division of the GRBT includes steel, cement, paper, wood and grain. In contrast, the environmental division of the GRBT includes oxygen, CO 2 and methane. The transaction division rows in the GRBT include production, conversion, end use and stock. Each cell of the GRBT contains the quantities of the respective resources that were generated or consumed. The relationships between the cells were constructed from the laws of conservation of the materials and energy. We constructed a GRBT for 2007 and discussed the increasing air temperature due to waste heat and the CO 2 equivalent from human breathing. The GRBT is a comprehensive integrated table that represents the resources that are consumed by human activities and is useful for energy and environmental studies. - Highlights: • We extended energy balance table and introduced Global Resource Balance Table. • It shows relationships between energy, materials and the environment. • The material division includes steel, cement, paper, wood and grain. • The environmental division includes oxygen, CO 2 and methane. • We discussed on waste heat and CO 2 emission by human breathing

Equality in the distribution of health material and human resources in Guangxi: evidence from Southern China.

Science.gov (United States)

Sun, Jian

2017-08-29

The aim of this study was to assess the equality in the distribution of health material and human resources in Guangxi, and put forward proposal to improve the equality status of the health material and human resources. We used concentration index to evaluate the degree of income-related equality of health material and human resources. The concentration index values of the five resources ranged from -0.0847 to 0.1416 from 2011 to 2015. Health institution was concentrated among the poorer populations, while other four resources were concentrated among the richer populations. Overall, the equality status of health institutions, health care beds, health technical personnel, and certified nurses got better from 2011 to 2015. However, the equality status of practicing physicians has got worse since 2014.

Information resources and material selection in bonded restorations among Korean dentists.

Science.gov (United States)

Chang, Juhea; Kim, Hae-Young; Cho, Byeong Hoon; Lee, In Bog; Son, Ho Hyun

2009-12-01

To elucidate how dentists access knowledge sources when choosing adhesive agents for bonded restoration and whether these resources influenced the selection of materials. A national survey was carried out involving dentists in South Korea. The questionnaire included the status of the operator, clinical techniques, and materials. A total of 12,193 e-mails were distributed, 2632 were opened by recipients, and 840 responses were collected. For primary information resources in material selection, 55.8% (n = 469) of the responders mentioned continuing education. This selection criteria varied according to the working status of the clinician (p choice of bonding system was influenced by of the length of the career (p < 0.0001), and the preferred bonding systems differed according to the source of the information (p = 0.035). The popular bonding systems were not ranked according to the bonding strategy, but a preference was found for specific brands or manufacturers. To decrease the confusion of clinicians related to the selection of bonding materials, evidence-based guidelines need to be comprehensibly organized and efficiently approached in clinics.

Materials considerations in accelerator targets

International Nuclear Information System (INIS)

Peacock, H.B. Jr.; Iyer, N.C.; Louthan, M.R. Jr.

1994-01-01

Future nuclear materials production and/or the burn-up of long lived radioisotopes may be accomplished through the capture of spallation produced neutrons in accelerators. Aluminum clad-lead and/or lead alloys has been proposed as a spallation target. Aluminum was the cladding choice because of the low neutron absorption cross section, fast radioactivity decay, high thermal conductivity, and excellent fabricability. Metallic lead and lead oxide powders were considered for the target core with the fabrication options being casting or powder metallurgy (PM). Scoping tests to evaluate gravity casting, squeeze casting, and casting and swaging processes showed that, based on fabricability and heat transfer considerations, squeeze casting was the preferred option for manufacture of targets with initial core cladding contact. Thousands of aluminum clad aluminum-lithium alloy core targets and control rods for tritium production have been fabricated by coextrusion processes and successfully irradiated in the SRS reactors. Tritium retention in, and release from the coextruded product was modeled from experimental and operational data. Newly produced tritium atoms were trapped by lithium atoms to form a lithium tritide. The effective tritium pressure required for trap or tritide stability was the equilibrium decomposition pressure of tritium over a lithium tritide-aluminum mixture. The temperature dependence of tritium release was determined by the permeability of the cladding to tritium and the local equilibrium at the trap sites. The model can be used to calculate tritium release from aluminum clad, aluminum-lithium alloy targets during postulated accelerator operational and accident conditions. This paper describes the manufacturing technologies evaluated and presents the model for tritium retention in aluminum clad, aluminum-lithium alloy tritium production targets

ECONOMIC AND LEGAL ASPECTS OF MANAGEMENT OF WASTES AND SECONDARY MATERIAL RESOURCES (ON THE EXAMPLE OF CONSTRUCTION COMPLEX

Directory of Open Access Journals (Sweden)

Tskhovrebov Eduard Stanislavovich

2018-05-01

Full Text Available Subject: technical and economic processes and aspects of handling wastes and secondary material resources; stages of transition of anthropogenic object of environment to wastes and secondary material resources; technical possibility and economic feasibility of using secondary material resources as a secondary raw material for making products, providing energy, works, services. The problem of economy and rational use of material and power resources is relevant and significant within the limits of maintenance of a strategic course of Russia on innovative sustainable development. In this article, issues of actualization and harmonization of the regulatory and legal base in the field of management of wastes and secondary material resources are considered from the viewpoint of maintenance of minimization of waste formation and maximum use of secondary material resources in an industrial-economic cycle, provision of economic incentives for innovative activity in the given field. The actual multi-plan problem, chosen here as a topic of research, concerns regulations in management of wastes and secondary material resources in construction complex, in which economic, civil-law, ecological, social, industrial and legal relations are closely coordinated and define a subject of the present research. Production and consumption waste is a dangerous anthropogenic object of the environment but at the same time, it is a valuable secondary material resource. The non-use of wastes to be recycled as secondary raw materials for energy generation, production and, as a result, their increasing accumulation in the environment causes irreparable harm to natural objects and human health due to their dangerous properties. Research objectives: scientific and methodological substantiation of legal regulation, economic basis for formation of wastes and secondary material resources management system (on the example of construction complex and building materials industry

A Consideration of Human Resource Management Future

OpenAIRE

Samad Nasiri; Sahar Valikhanfard Zanjani

2012-01-01

The prediction of future events, at best, is a risky endeavor. Researchers and theorists have different views about what will happen to human resource managers. Most research has been done on topics of technology, intellectual capital, and government regulation, workforce demographic changes, shrinking organizations, international management and globalization. It is evident that all the issues mentioned play a very important role in human resource management over the coming decades, and some ...

Time to propagate green building construction concept for saving precious resources sustainable development

International Nuclear Information System (INIS)

Ali, Z.

2005-01-01

At present, we are constructing houses and buildings without giving any consideration to consumption of resources at the time of construction and consumption of resources for the use of such houses or buildings. ; Although green is our color but we are doing little about green building. Time has now come to propagate Green Building Construction Concepts in order to save our precious resources. The paper deals with dire need of awareness about conservation of water, conservation of energy, use of local materials, use of natural materials, etc. (author)

Prospects for development of hydrocarbon raw materials resources reproduction

Science.gov (United States)

Vertakova, Y. V.; Babich, T. N.; Polozhentseva, Y. S.; Zvyagintsev, G. L.

2017-10-01

The article presents data on the influence of factors in the field of innovative technology of thermocatalytic depolymerization of solid household wastes (SHW) on the efficiency and prospects for the development of technogenic hydrocarbon raw materials resource reproduction. Process thermodynamics, reactions kinetics, the mechanism of thermolysis of secondary polymers in organic solvents have been studied by means of laboratory experiments. It is shown that different morphological groups of wastes dissolve practically at the same rate at temperatures of 250-310°C. A homogeneous product is formed in the liquid phase; the spread of values for the elements lies in the interval of 1.5-4.5 %; technological requirements of the stages of formation of boiler fuels are satisfied. Using the principles of patent analysis, new techniques of processing household waste components are proposed. The basics of energy-efficient and energy-saving processes of technogenic hydrocarbon raw materials resource reproduction have been laid. The possibility of increasing the production payback and intensification is shown. Ecological and demographic safety for population and technical and economic benefits from SHW processing are achieved.

Reuse and recovery of raw materials: Towards the achievement of a resource-efficient society

International Nuclear Information System (INIS)

Brunori, Claudia; Cutaia, Laura; Norabito, Roberto

2015-01-01

Resource efficiency plays a key role in the transition from a linear to a circular economy system. During the last few decades a rapid growth in the number of materials used across complex products has occurred. Given the high economic importance of critical raw materials combined with relatively high supply risk, securing reliable and undistorted access of certain raw materials is of growing concern across the globe. Development of eco-innovative approaches devoted to closing the loop of resources is strongly needed, allowing the connection between production cycles and their territory.

The ideal usage of sustainable materials and local resources of the interior space design in Jordan

Energy Technology Data Exchange (ETDEWEB)

Fahmi Hussien, Mayyadah [Department of Interior Design, Faculty of Architect and Art, Petra University (Jordan)], Email: Mayada19732004@yahoo.com

2011-07-01

A large amount of waste is generated by buildings over their life cycle, from construction and operation to destruction. Sustainable design principles and recycling programs in buildings can help moderate this waste. The simplest way is directly through the materials used in the building's construction. The materials and resources used should focus on the health and productivity consequences for the building's inhabitants and its environmental, social and economic impacts. This aim of this study is to make certain recommendations with respect to the use of sustainable building materials and resources in indoor spaces in Jordan. A general overview of collection and storage of recyclable materials, waste management, material reuse, and green and rapidly renewable materials is given. Sustainable material usage in the elements of interior design in Jordan is also discussed in two case studies. A set of indicators is proposed which identify the ideal sustainable materials and resources for use in interior design in Jordan to provide a healthy living environment.

Evaluation of a webquest on the theme "management of material resources in nursing" by undergraduate students.

Science.gov (United States)

Pereira, Marta Cristiane Alves; Melo, Márcia Regina Antonietto da Costa; Silva, Adriana Serafim Bispo E; Evora, Yolanda Dora Martinez

2010-01-01

The learning process mediated by information and communication technology has considerable importance in the current context. This study describes the evaluation of a WebQuest on the theme "Management of Material Resources in Nursing". It was developed in three stages: Stage 1 consisted of its pedagogical aspect, that is, elaboration and definition of content; Stage 2 involved the organization of content, inclusion of images and completion; Stage 3 corresponded to its availability to students. Results confirm the importance of information technology and information as instruments for a mediating teaching practice in the integration between valid knowledge and the complex and dynamic reality of health services. As a result of the students' favorable evaluation of the approximation with the reality of nursing work and satisfaction for performing the activity successfully, the WebQuest method was considered valid and innovating for the teaching-learning process.

Revisiting Rebound Effects from Material Resource Use. Indications for Germany Considering Social Heterogeneity

Directory of Open Access Journals (Sweden)

Johannes Buhl

2014-02-01

Full Text Available In contrast to the original investigation by William Stanley Jevons, compensations of energy savings due to improved energy efficiency are mostly analyzed by providing energy consumption or greenhouse gas emissions. In support of a sustainable resource management, this paper analyzes so-called rebound effects based on resource use. Material flows and associated expenditures by households allow for calculating resource intensities and marginal propensities to consume. Marginal propensities to consume are estimated from data of the German Socio-Economic Panel (SOEP in order to account for indirect rebound effects for food, housing and mobility. Resource intensities are estimated in terms of total material requirements per household final consumption expenditures along the Classification of Individual Consumption according to Purpose (COICOP. Eventually, rebound effects are indicated on the basis of published saving scenarios in resource and energy demand for Germany. In sum, compensations due to rebound effects are lowest for food while the highest compensations are induced for mobility. This is foremost the result of a relatively high resource intensity of food and a relatively low resource intensity in mobility. Findings are provided by giving various propensity scenarios in order to cope with income differences in Germany. The author concludes that policies on resource conservation need to reconsider rebound effects under the aspect of social heterogeneity.

Materials considerations for molten salt accelerator-based plutonium conversion systems

International Nuclear Information System (INIS)

DiStefano, J.R.; DeVan, J.H.; Keiser, J.R.; Klueh, R.L.; Eatherly, W.P.

1995-03-01

Accelerator-driven transmutation technology (ADTT) refers to a concept for a system that uses a blanket assembly driven by a source of neutrons produced when high-energy protons from an accelerator strike a heavy metal target. One application for such a system is called Accelerator-Based Plutonium Conversion, or ABC. Currently, the version of this concept being proposed by the Los Alamos National Laboratory features a liquid lead target material and a blanket fuel of molten fluorides that contain plutonium. Thus, the materials to be used in such a system must have, in addition to adequate mechanical strength, corrosion resistance to molten lead, corrosion resistance to molten fluoride salts, and resistance to radiation damage. In this report the corrosion properties of liquid lead and the LiF-BeF 2 molten salt system are reviewed in the context of candidate materials for the above application. Background information has been drawn from extensive past studies. The system operating temperature, type of protective environment, and oxidation potential of the salt are shown to be critical design considerations. Factors such as the generation of fission products and transmutation of salt components also significantly affect corrosion behavior, and procedures for inhibiting their effects are discussed. In view of the potential for extreme conditions relative to neutron fluxes and energies that can occur in an ADTT, a knowledge of radiation effects is a most important factor. Present information for potential materials selections is summarized

Materials considerations for molten salt accelerator-based plutonium conversion systems

International Nuclear Information System (INIS)

DiStefano, J.R.; DeVan, J.H.; Keiser, J.R.; Klueh, R.L.; Eatherly, W.P.

1995-02-01

Accelerator-driven transmutation technology (ADTT) refers to a concept for a system that uses a blanket assembly driven by a source of neutrons produced when high-energy protons from an accelerator strike a heavy metal target. One application for such a system is called Accelerator-Based Plutonium Conversion, or ABC. Currently, the version of this concept being proposed by the Los Alamos National Laboratory features a liquid lead target material and a blanket fuel of molten fluorides that contain plutonium. Thus, the materials to be used in such a system must have, in addition to adequate mechanical strength, corrosion resistance to molten lead, corrosion resistance to molten fluoride salts, and resistance to radiation damage. In this report the corrosion properties of liquid lead and the LiF-BeF 2 molten salt system are reviewed in the context of candidate materials for the above application. Background information has been drawn from extensive past studies. The system operating temperature, type of protective environment, and oxidation potential of the salt are shown to be critical design considerations. Factors such as the generation of fission products and transmutation of salt components also significantly affect corrosion behavior, and procedures for inhibiting their effects are discussed. In view of the potential for extreme conditions relative to neutron fluxes and energies that can occur in an ADTT, a knowledge of radiation effects is a most important factor. Present information for potential materials selections is summarized

Europa Lander Material Selection Considerations

Energy Technology Data Exchange (ETDEWEB)

Tappan, Alexander S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Heller, Mellisa [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-01-10

Energetic materials (EMs, explosives, pyrotechnics, propellants) provide high-power output of high temperature reaction products. These products can be solid, liquid, or gaseous during reaction or after the products have equilibrated with the surroundings. For example, high explosives typically consist of carbon, hydrogen, nitrogen, and oxygen bonded within a single molecule, and produce almost exclusively gaseous products. Conversely, intermetallics consist of physical mixtures of metals and metalloids, and produce almost exclusively condensed products. Other materials such as pyrotechnics and propellants have intermediate behavior. All energetic materials react in a self-propagating manner that after ignition, does not necessarily require energy input from the surroundings. The range of reaction velocities can range from mm/s for intermetallics, to km/s for high explosives. Energetic material selection depends on numerous requirements specific to the needs of a system. High explosives are used for applications where high pressure gases are necessary for pushing or fracturing materials (e.g., rock, metal) or creating shock waves or air blast. Propellants are used to produce moderate-pressure, high-temperature products without a shock wave. Pyrotechnics are used to produce numerous effects including: high-temperature products, gases, light, smoke, sound, and others. Thermites are used to produce heat, high-temperature products, materials, and other effects that require condensed products. Intermetallics are used to produce high-temperature condensed products and materials, with very little gas production. Numerous categories of energetic materials exist with overlapping definitions, effects, and properties.

Material Resources For Eye Care Delivery In Urban South-Eastern ...

African Journals Online (AJOL)

Objectives: To determine the availability and distribution of material resources for primary and secondary level eye care delivery in Enugu-North Local Government Area (LGA) of Enugu State. Methods: A survey of Public (State and Local Government administered) health care facilities in Enugu North LGA was done.

Establishing a pediatric cardiac intensive care unit - Special considerations in a limited resources environment

Directory of Open Access Journals (Sweden)

Nair Suresh

2010-01-01

Full Text Available Pediatric cardiac intensive care has evolved as a distinct discipline in well-established pediatric cardiac programs in developed nations. With increasing demand for pediatric heart surgery in emerging economies, a number of new programs are being established. The development of robust pediatric cardiac intensive care units (PCICU is critical to the success of these programs. Because of substantial resource limitations existing models of PCICU care cannot be applied in their existing forms and structure. A number of challenges need to be addressed to deliver pediatric cardiac intensive care in the developing world. Limitations in infrastructure, human, and material resources call for a number of innovations and adaptations. Additionally, a variety of strategies are required to minimize costs of care to the individual patient. This review provides a framework for the establishment of a new PCICU program in face of resource limitations typically encountered in the developing world and emerging economies.

What do we know of world uranium resources?

International Nuclear Information System (INIS)

Capus, G.

2007-01-01

The current trend, of a return to nuclear energy around the world, already appears to have had the effect of pushing up uranium prices. What are the facts, on the other hand, as to the physical resources for this raw material? Will identified resources, and those yet to be discovered, allow the demand to be met? This survey shows the energy potential from fission nuclear power, provided due planning is made for the required capital investment, remains considerable indeed. (author)

The Role of Material/Energy Resources and Dematerialisation in Economic Growth Theories

OpenAIRE

Ayres, Robert U.; van den Bergh, Jeroen C.J.M.

2000-01-01

The nature of energy and material resources in an endogenous growththeory framework isclarified. This involves three modifications of the conventionaltheory. Firstly, multiple feedbackmechanisms or “growth engines” are identified. Secondly, a productionfunction distinguishesbetween resource use, technical efficiency and value creation.Thirdly, the impact of the cost ofproduction through demand on growth is accounted for. A formal modelis analytically solvedunder a condition of a constant grow...

Optimal allocation of international atomic energy agency inspection resources

International Nuclear Information System (INIS)

Markin, J.T.

1987-01-01

Each year the Department of Safeguards of the International Atomic Energy Agency (IAEA) conducts inspections to confirm that nuclear materials and facilities are employed for peaceful purposes. Because of limited inspection resources, however, the IAEA cannot fully attain its safeguards goals either quantitatively as measured by the inspection effort negotiated in the facility attachments or qualitatively as measured by the IAEA criteria for evaluating attainment of safeguards goals. Under current IAEA procedures the allocation of inspection resources assigns essentially equal inspection effort to facilities of the same type. An alternative approach would incorporate consideration of all material categories and facilities to be assigned inspection resources when allocating effort to a particular facility. One such method for allocating inspection resources is based on the IAEA criteria. The criteria provide a framework for allocating inspection effort that includes a ranking of material types according to their safeguards importance, an implicit definition of inspection activities for each material and facility type, and criteria for judging the attainment of safeguards goals in terms of the quality and frequency of these inspection activities. This framework is applicable to resource allocation for an arbitrary group of facilities such as a state's fuel cycle, the facilities inspected by an operations division, or all of the facilities inspected by the IAEA

An overview of safety and environmental considerations in the selection of materials for fusion facilities

International Nuclear Information System (INIS)

Petti, D.A.; Piet, S.J.; Seki, Y.

1996-01-01

Safety and environmental considerations can play a large role in the selection of fusion materials. In this paper, we review the attributes of different structural, plasma facing, and breeding materials from a safety perspective and discuss some generic waste management issues as they relate to fusion materials in general. Specific safety concerns exist for each material that must be dealt with in fusion facility design. Low activation materials offer inherent safety benefits compared with conventional materials, but more work is needed before these materials have the requisite certified databases. In the interim, the international thermonuclear experimental reactor (ITER) has selected more conventional materials and is showing that the safety concerns with these materials can be addressed by proper attention to design. In the area of waste management disposal criteria differ by country. However, the criteria are all very strict making disposal of fusion components difficult. As a result, recycling has gained increasing attention. (orig.)

Resource Use in Small Island States: Material Flows in Iceland and Trinidad and Tobago, 1961-2008.

Science.gov (United States)

Krausmann, Fridolin; Richter, Regina; Eisenmenger, Nina

2014-04-01

Iceland and Trinidad and Tobago are small open, high-income island economies with very specific resource-use patterns. This article presents a material flow analysis (MFA) for the two countries covering a time period of nearly five decades. Both countries have a narrow domestic resource base, their economy being largely based on the exploitation of one or two key resources for export production. In the case of Trinidad and Tobago, the physical economy is dominated by oil and natural gas extraction and petrochemical industries, whereas Iceland's economy for centuries has been based on fisheries. More recently, abundant hydropower and geothermal heat were the basis for the establishment of large export-oriented metal processing industries, which fully depend on imported raw materials and make use of domestic renewable electricity. Both countries are highly dependent on these natural resources and vulnerable to overexploitation and price developments. We show how the export-oriented industries lead to high and growing levels of per capita material and energy use and carbon dioxide emissions resulting from large amounts of processing wastes and energy consumption in production processes. The example of small open economies with an industrial production system focused on few, but abundant, key resources and of comparatively low complexity provides interesting insights of how resource endowment paired with availability or absence of infrastructure and specific institutional arrangements drives domestic resource-use patterns. This also contributes to a better understanding and interpretation of MFA indicators, such as domestic material consumption.

The American Slave Narrative. Dramatic Resource Material for the Classroom

Science.gov (United States)

Polsky, Milton

1976-01-01

Notes that the story of the black runaway who escapes the slave status under great risk to live as a free man or woman comprises one of the most meaningful chapters in United States history. The slave narrative genre offers resource material which all children should find compelling and inspiring. (Author/AM)

Materials considerations in accelerator targets

International Nuclear Information System (INIS)

Peacock, H. B. Jr.; Iyer, N. C.; Louthan, M. R. Jr.

1995-01-01

Future nuclear materials production and/or the burn-up of long lived radioisotopes may be accomplished through the capture of spallation produced neutrons in accelerators. Aluminum clad-lead and/or lead alloys has been proposed as a spallation target. Aluminum was the cladding choice because of the low neutron absorption cross section, fast radioactivity decay, high thermal conductivity, and excellent fabricability. Metallic lead and lead oxide powders were considered for the target core with the fabrication options being casting or powder metallurgy (PM). Scoping tests to evaluate gravity casting, squeeze casting, and casting and swaging processes showed that, based on fabricability and heat transfer considerations, squeeze casting was the preferred option for manufacture of targets with initial core cladding contact. Thousands of aluminum clad aluminum-lithium alloy core targets and control rods for tritium production have been fabricated by coextrusion processes and successfully irradiated in the SRS reactors. Tritium retention in, and release from, the coextruded product was modeled from experimental and operational data. The model assumed that tritium atoms, formed by the 6Li(n,a)3He reaction, were produced in solid solution in the Al-Li alloy. Because of the low solubility of hydrogen isotopes in aluminum alloys, the irradiated Al-Li rapidly became supersaturated in tritium. Newly produced tritium atoms were trapped by lithium atoms to form a lithium tritide. The effective tritium pressure required for trap or tritide stability was the equilibrium decomposition pressure of tritium over a lithium tritide-aluminum mixture. The temperature dependence of tritium release was determined by the permeability of the cladding to tritium and the local equilibrium at the trap sites. The model can be used to calculate tritium release from aluminum clad, aluminum-lithium alloy targets during postulated accelerator operational and accident conditions. This paper describes

Inner solar system prospective energy and material resources

CERN Document Server

Zacny, Kris

2015-01-01

This book investigates Venus and Mercury prospective energy and material resources. It is a collection of topics related to exploration and utilization of these bodies. It presents past and future technologies and solutions to old problems that could become reality in our life time. The book therefore is a great source of condensed information for specialists interested in current and impending Venus and Mercury related activities and a good starting point for space researchers, inventors, technologists and potential investors.   Written for researchers, engineers, and businessmen interested in Venus and Mercury exploration and exploitation.

Some safety considerations of liquid lithium as a fusion breeder material

International Nuclear Information System (INIS)

Jeppson, D.W.; Muhlestein, L.D.

1986-01-01

Test results and conclusions are presented for the reaction of steam with a high temperature lithium pool and for the reaction of high temperature lithium spray with a nitrogen atmosphere. The reactions are characterized and evaluated in regard to the potential for mobilization of radioactive species associated with the liquid breeder under postulated fusion reactor accident conditions. These evaluations include measured lithium temperature responses, atmosphere temperature and pressure responses, gas consumption and generation, aerosol quantities and particle size characterization, and potentially radioactive species releases. Conclusions are made as to the consequences of these safety considerations for the use of lithium as a fusion reactor breeder material

Eight Tons of Material Footprint—Suggestion for a Resource Cap for Household Consumption in Finland

Directory of Open Access Journals (Sweden)

Michael Lettenmeier

2014-07-01

Full Text Available The paper suggests a sustainable material footprint of eight tons, per person, in a year as a resource cap target for household consumption in Finland. This means an 80% (factor 5 reduction from the present Finnish average. The material footprint is used as a synonym to the Total Material Requirement (TMR calculated for products and activities. The paper suggests how to allocate the sustainable material footprint to different consumption components on the basis of earlier household studies, as well as other studies, on the material intensity of products, services, and infrastructures. It analyzes requirements, opportunities, and challenges for future developments in technology and lifestyle, also taking into account that future lifestyles are supposed to show a high degree of diversity. The targets and approaches are discussed for the consumption components of nutrition, housing, household goods, mobility, leisure activities, and other purposes. The paper states that a sustainable level of natural resource use by households is achievable and it can be roughly allocated to different consumption components in order to illustrate the need for a change in lifestyles. While the absolute material footprint of all the consumption components will have to decrease, the relative share of nutrition, the most basic human need, in the total material footprint is expected to rise, whereas much smaller shares than at present are proposed for housing and especially mobility. For reducing material resource use to the sustainable level suggested, both social innovations, and technological developments are required.

Ethical considerations in HIV prevention and vaccine research in resource-limited settings.

Science.gov (United States)

Garner, Samual A; Anude, Chuka J; Adams, Elizabeth; Dawson, Liza

2014-09-01

HIV prevention research has been facing increasing ethical and operational challenges. Factors influencing the design and conduct of HIV prevention trials include a rapidly changing evidence base, new biomedical prevention methods and modalities being tested, a large diversity of countries, sites and populations affected by HIV and participating in trials, and challenges of developing and making available products that will be feasible and affordable for at-risk populations. To discuss these challenges, a meeting, Ethical considerations around novel combination prevention modalities in HIV prevention and vaccine trials in resource-limited settings, was convened by NIH/NIAID/Division of AIDS on April 22-23, 2013. Several themes emerged from the meeting: (1) because of both trial design and ethical complexities, choosing prevention packages and designing combination prevention research trials will need to be evaluated on a case by case basis in different clinical trials, countries, and health systems; (2) multilevel stakeholder engagement from the beginning is vital to a fair and transparent process and also to designing ethical and relevant trials; (3) research should generally be responsive to a host country's needs, and sponsors and stakeholders should work together to address potential barriers to future access; and finally, (4) another meeting including a broader group of stakeholders is needed to address many of the outstanding ethical issues raised by this meeting. We offer an overview of the meeting and the key discussion points and recommendations to help guide the design and conduct of future HIV prevention and vaccine research in resource-limited settings.

Academic Entrepreneurship and Exchange of Scientific Resources: Material Transfer in Life and Materials Sciences in Japanese Universities

Science.gov (United States)

Shibayama, Sotaro; Walsh, John P.; Baba, Yasunori

2012-01-01

This study uses a sample of Japanese university scientists in life and materials sciences to examine how academic entrepreneurship has affected the norms and behaviors of academic scientists regarding sharing scientific resources. Results indicate that high levels of academic entrepreneurship in a scientific field are associated with less reliance…

Exergy Analysis of the Supply of Energy and Material Resources in the Swedish Society

Directory of Open Access Journals (Sweden)

Mei Gong

2016-09-01

Full Text Available Exergy is applied to the Swedish energy supply system for the period 1970–2013. Exergy flow diagrams for the systems of electricity and district heating as well as for the total supply system of energy and material resources for 2012 are presented. The share of renewable use has increased in both electricity and district heat production. The resource use is discussed in four sectors: residential and service, transportation, industry and agriculture. The resource use is also analyzed with respect to exergy efficiency and renewable share. The total exergy input of energy and material resources amounts to about 2700 PJ of which about 530 PJ was used for final consumption in 2012. The results are also compared with similar studies. Even though the share of renewable resource use has increased from 42% in 1980 to 47% in 2012, poor efficiency is still occurring in transportation, space heating, and food production. A strong dependence on fossil and nuclear fuels also implies a serious lack of sustainability. A more exergy efficient technology and a higher renewable energy share are needed in order to become a more sustainable society.

Work in the classrooms with European perspective: materials and resources for autonomus learning

Directory of Open Access Journals (Sweden)

Manuela RAPOSO RIVAS

2011-04-01

Full Text Available One of the key principles set forth in the bologna process is to focus teaching on students, by getting involved actively and independently in their learning process and in developing their skills. This requires the use of teaching and learning methods together with materials and resources to motivate and guide them. In this paper, we present three of them, from our experience in adapting the subject of «New Technologies Applied to education» to the ecTs system, which we have found useful for guiding and evaluating the learning process and promote the intended learning. These materials and resources are: «learning guides», the portfolio and the rubric.

Regenerative raw materials - High technology without end; Nachwachsende Rohstoffe - Spitzentechnologie ohne Ende

Energy Technology Data Exchange (ETDEWEB)

Wenig, Barbara

2007-07-01

Regenerative raw materials are the basis for a multiplicity of environmentally friendly products. Regenerating raw materials fascinate by special qualities and offer the possibility of preserving only restricted existing fossil resources and climatic friendly managing. The review under consideration reports on areas in which vegetable raw materials already are established as well as on future prospects.

Sustainable processes synthesis for renewable resources

International Nuclear Information System (INIS)

Halasz, L.; Povoden, G.; Narodoslawsky, M.

2005-01-01

Renewable resources pose special challenges to process synthesis. Due to decentral raw material generation, usually low transport densities and the perishable character of most renewable raw materials in combination with their time dependent availability, logistical questions as well as adaptation to regional agricultural structures are necessary. This calls for synthesis of structures not only of single processes but of the whole value chain attached to the utilisation of a certain resource. As most of the innovative technologies proposed to build on a renewable raw material base face stiff economic competition from fossil based processes, economic optimality of the value chain is crucial to their implementation. On top of this widening of the process definition for synthesis, many processes on the base of renewable resources apply technologies (like membrane separations, chromatographic purification steps, etc.) for which the heuristic knowledge is still slim. This reduces the choice of methods for process synthesis, mainly to methods based on combinatorial principles. The paper investigates applicability as well as impact on technology development of process synthesis for renewable raw material utilisation. It takes logistic considerations into account and applies process synthesis to the case study of the green biorefinery concept. The results show the great potential of process synthesis for technology development of renewable resource utilisation. Applied early in the development phase, it can point towards the most promising utilisation pathways, thus guiding the engineering work. On top of that, and even more important, it can help avoid costly development flops as it also clearly indicates 'blind alleys' that have to be avoided

Sustainable development and the exploitation of mineral and energy resources: a review

Science.gov (United States)

Wellmer, F.-W.; Becker-Platen, J. D.

2002-04-01

Natural resources, e.g., metals, industrial minerals, water, and soil, are the essential basis for our economy and well-being. We have to know where these raw materials come from and how they are mined. Sustainable development requires the maintenance, rational use and enhancement of natural resources, as well as a balanced consideration of ecology, economy and social justice. Four general rules concerning the implementation of sustainable development for renewable and non-renewable resources are discussed. Examples of the consumption of selected materials from historical times to the present day are presented, as well as of regional distribution, usage (in contrast to consumption), lifetimes of resources, the supply-and-demand cycle, recycling and substitution in modern times. To fulfill the requirement of sustainable development, the efficiency with which resources are utilized has to be improved. The learning process, often driven by financial rewards, leads from one technology to a better one, thus increasing the efficiency of the use of a resource or commodity. Examples of learning curves are discussed. Industrial countries have to transfer their advanced technologies to developing countries in order to avoid undesirable development in the mining industry and use of natural resources in those regions. The use of the best available technology by the mining industry, taking into account economic considerations, and the necessity to establish environmental guidelines are essential if environmental impact of the production of non-renewable resources is to be minimized. Far more critical than the production of non-renewable resources under the aspect of sustainable development and the capacity of the pollutant sinks of the Earth is the element of natural attenuation with regard to the resources soil and water.

Assessment of material and technical resources of crop production technologies

Directory of Open Access Journals (Sweden)

V. M. Beylis

2017-01-01

Full Text Available The author explains the general principles of influence of the material and technical resources (MTR on performance and efficiency of the main technological operations in crop production. Various technologies from the point of view of MTR expenses were estimated. The general tendencies in development of crop production technologies were revealed. The distribution of costs of materials and equipment to perform a variety of agricultural activities was determined. Cost indicators should be a guide in the search of innovative technological processes and working elements of agricultural machins. The greatest values of expenses of work, fuel, metal, and also, money where found. The concepts allowing to provide costs production reduction were formulated. To achieve the maximum productivity with the minimum expenses, the perspective calculations shoul be based on «progressive» agrotechnologies. When determining progressive agrotechnology it is necessary on reasonable grounds to approach indicators of crop productivity in various agrozones and regions of the country. For an assessment of efficiency of MTR by crop production and ensuring decrease in resource intensity of agricultural products by search and use of essentially new technologies for energy saving when performing agricultural operations, an integrated percentage indicator of comparison of progressive technologies with the applied ones was developed. MTR at application of new progressive crop production technologies by integrated percentage index were estimated. This indicator can be used for definition of efficiency of MTR. Application of the offered technique will promote an effective assessment of MTR, decrease in resource intensity by search and developments of essentially new technologies of performance of operations in crop production.

EARTH RESOURCE PROBLEMS AND RELATED ENVIRONMENTAL CONSIDERATIONS

Directory of Open Access Journals (Sweden)

Orlitová Erika

1997-10-01

Full Text Available The paper discusses some of the problems of geology and earth resources management in relation to environmental problems of the technosphere. It deals also with some aspects of environmental monitoring of areas where surveying or mining operations are planned or in progress.

REPORT AND RECOMMENDATION FOR LEARNING MATERIALS CENTER.

Science.gov (United States)

KEIM, WILLIAM A.; AND OTHERS

THIS REPORT IS A HISTORY OF THE DEVELOPMENT OF A SET OF EDUCATIONAL SPECIFICATIONS FOR THE EXPANSION OF AN EXISTING LIBRARY AND THE ADDITION OF AN INSTRUCTIONAL MATERIALS CENTER. PRELIMINARY CONSIDERATION WAS GIVEN TO THE METHODS OF INSTRUCTION AT THE COLLEGE, THE STUDENTS, THE FACULTY, AND THE AVAILABLE FINANCIAL RESOURCES. A GENERAL STUDY…

Considerations for reducing food system energy demand while scaling up urban agriculture

DEFF Research Database (Denmark)

Mohareb, Eugene; Heller, Martin; Novak, Paige

2017-01-01

-income countries, considering UA classification, direct/indirect energy pressures, and interactions with other components of the food-energy-water nexus. This is followed by an exploration of ways in which these cities can plan for the exploitation of waste flows for resource-efficient UA...... with UA systems, highlighting that the literature is not yet sufficiently robust to make universal claims on benefits. This letter explores energy demand from conventional resource inputs, various production systems, water/energy trade-offs, alternative irrigation, packaging materials, and transportation...... of the proposed benefits of UA; however, explicit consideration of energy and resource requirements needs to be made in order to realize these anticipated environmental benefits. A literature review is undertaken here to provide new insight into the energy implications of scaling up UA in cities in high...

Some considerations on robotics for environmental friendliness

International Nuclear Information System (INIS)

Pin, F.G.

1993-01-01

This paper presents a series of considerations regarding the use and potential of robotic devices for supporting humans in a variety of tasks, while maintaining, if not improving, environmental friendliness. One of the main considerations brought forward here relates to the type of human-support functions which the robots are, or will be, expected to perform, and from this, a clear differentiation appears between robots designed to replace humans in environments that were engineered in the past for best human functionality, and robots designed to take functions in the future, in environments which could be better engineered for large-scale human-robot synergy. Other considerations discussed involve the ''life-cycle'' cleanliness of robotic systems, including the materials needs for their construction, their operation, their disposal and, more importantly, their energy consumption which will impact the cycle of natural resources utilization. These considerations are discussed using a variety of possible robotic systems applications in contexts varied as manufacturing, energy recovery and production, emergency situations handling, traffic improvement, waste management, agriculture, and space exploration. In all these applications, the operation costs and complexity of the robots seem to vary in inverse proportion to the amount of engineering that is feasible to make the task environment more robot-friendly, but with no seemingly direct impact on the potential for environmental friendliness of the robots

Some considerations on robotics for environmental friendliness

Energy Technology Data Exchange (ETDEWEB)

Pin, F.G.

1993-12-01

This paper presents a series of considerations regarding the use and potential of robotic devices for supporting humans in a variety of tasks, while maintaining, if not improving, environmental friendliness. One of the main considerations brought forward here relates to the type of human-support functions which the robots are, or will be, expected to perform, and from this, a clear differentiation appears between robots designed to replace humans in environments that were engineered in the past for best human functionality, and robots designed to take functions in the future, in environments which could be better engineered for large-scale human-robot synergy. Other considerations discussed involve the ``life-cycle`` cleanliness of robotic systems, including the materials needs for their construction, their operation, their disposal and, more importantly, their energy consumption which will impact the cycle of natural resources utilization. These considerations are discussed using a variety of possible robotic systems applications in contexts varied as manufacturing, energy recovery and production, emergency situations handling, traffic improvement, waste management, agriculture, and space exploration. In all these applications, the operation costs and complexity of the robots seem to vary in inverse proportion to the amount of engineering that is feasible to make the task environment more robot-friendly, but with no seemingly direct impact on the potential for environmental friendliness of the robots.

Integrating Demand-Side Resources into the Electric Grid: Economic and Environmental Considerations

Science.gov (United States)

Fisher, Michael J.

Demand-side resources are taking an increasingly prominent role in providing essential grid services once provided by thermal power plants. This thesis considers the economic feasibility and environmental effects of integrating demand-side resources into the electric grid with consideration given to the diversity of market and environmental conditions that can affect their behavior. Chapter 2 explores the private economics and system-level carbon dioxide reduction when using demand response for spinning reserve. Steady end uses like lighting are more than twice as profitable as seasonal end uses because spinning reserve is needed year-round. Avoided carbon emission damages from using demand response instead of fossil fuel generation for spinning reserve are sufficient to justify incentives for demand response resources. Chapter 3 quantifies the system-level net emissions rate and private economics of behind-the-meter energy storage. Net emission rates are lower than marginal emission rates for power plants and in-line with estimates of net emission rates from grid-level storage. The economics are favorable for many buildings in regions with high demand charges like California and New York, even without subsidies. Future penetration into regions with average charges like Pennsylvania will depend greatly on installation cost reductions and wholesale prices for ancillary services. Chapter 4 outlines a novel econometric model to quantify potential revenues from energy storage that reduces demand charges. The model is based on a novel predictive metric that is derived from the building's load profile. Normalized revenue estimates are independent of the power capacity of the battery holding other performance characteristics equal, which can be used to calculate the profit-maximizing storage size. Chapter 5 analyzes the economic feasibility of flow batteries in the commercial and industrial market. Flow batteries at a 4-hour duration must be less expensive on a dollar per

Determining the Supply of Material Resources for High-Rise Construction: Scenario Approach

Science.gov (United States)

Minnullina, Anna; Vasiliev, Vladimir

2018-03-01

This article presents a multi-criteria approach to determining the supply of material resources for high-rise construction under certain and uncertain conditions, which enables integrating a number of existing models into a fairly compact generalised economic and mathematical model developed for two extreme scenarios.

Marine dredged sediments as new materials resource for road construction.

Science.gov (United States)

Siham, Kamali; Fabrice, Bernard; Edine, Abriak Nor; Patrick, Degrugilliers

2008-01-01

Large volumes of sediments are dredged each year in Europe in order to maintain harbour activities. With the new European Union directives, harbour managers are encouraged to find environmentally sound solutions for these materials. This paper investigates the potential uses of Dunkirk marine dredged sediment as a new material resource for road building. The mineralogical composition of sediments is evaluated using X-ray diffraction and microscopy analysis. Since sediments contain a high amount of water, a dewatering treatment has been used. Different suitable mixtures, checking specific geotechnical criteria as required in French standards, are identified. The mixtures are then optimized for an economical reuse. The mechanical tests conducted on these mixtures are compaction, bearing capacity, compression and tensile tests. The experimental results show the feasibility of the beneficial use of Dunkirk marine dredged sand and sediments as a new material for the construction of foundation and base layers for roads. Further research is now needed to prove the resistance of this new material to various environmental impacts (e.g., frost damage).

Consideration of materials for aircraft brakes

Science.gov (United States)

Peterson, M. B.; Ho, T.-L.

1974-01-01

A study has been made of the frictional behavior of several aircraft brake materials using a simple high-temperature Falex-type apparatus. Tests were run at velocities of seven ft/minute; loads to 600 pounds and temperatures to 700 C. The data for these brake materials sliding against a variety of steels and other materials indicate a large reduction in friction due to surface oxidation in the temperature range 250 to 300 C. It also was found that the retention of this oxide was a function of the temperature changes. With increasing temperature the oxide was removed, while with reducing temperature it was retained. Frictional behavior was more characteristic of the steel than the brake material.

Material Control and Accounting Design Considerations for High-Temperature Gas Reactors

International Nuclear Information System (INIS)

Bjornard, Trond; Hockert, John

2011-01-01

The subject of this report is domestic safeguards and security by design (2SBD) for high-temperature gas reactors, focusing on material control and accountability (MC and A). The motivation for the report is to provide 2SBD support to the Next Generation Nuclear Plant (NGNP) project, which was launched by Congress in 2005. This introductory section will provide some background on the NGNP project and an overview of the 2SBD concept. The remaining chapters focus specifically on design aspects of the candidate high-temperature gas reactors (HTGRs) relevant to MC and A, Nuclear Regulatory Commission (NRC) requirements, and proposed MC and A approaches for the two major HTGR reactor types: pebble bed and prismatic. Of the prismatic type, two candidates are under consideration: (1) GA's GT-MHR (Gas Turbine-Modular Helium Reactor), and (2) the Modular High-Temperature Reactor (M-HTR), a derivative of Areva's Antares reactor. The future of the pebble-bed modular reactor (PBMR) for NGNP is uncertain, as the PBMR consortium partners (Westinghouse, PBMR (Pty) and The Shaw Group) were unable to agree on the path forward for NGNP during 2010. However, during the technology assessment of the conceptual design phase (Phase 1) of the NGNP project, AREVA provided design information and technology assessment of their pebble bed fueled plant design called the HTR-Module concept. AREVA does not intend to pursue this design for NGNP, preferring instead a modular reactor based on the prismatic Antares concept. Since MC and A relevant design information is available for both pebble concepts, the pebble-bed HTGRs considered in this report are: (1) Westinghouse PBMR; and (2) AREVA HTR-Module. The DOE Office of Nuclear Energy (DOE-NE) sponsors the Fuel Cycle Research and Development program (FCR and D), which contains an element specifically focused on the domestic (or state) aspects of SBD. This Material Protection, Control and Accountancy Technology (MPACT) program supports the present

Inventory extension considerations for long-term storage at the nuclear materials storage facility

International Nuclear Information System (INIS)

Olinger, C.T.; Stanbro, W.D.; Longmire, V.; Argo, P.E.; Nielson, S.M.

1996-01-01

Los Alamos National Laboratory is in the process of modifying its nuclear materials storage facility to a long-term storage configuration. In support of this effort, we examined technical and administrative means to extend periods between physical inventories. Both the frequency and sample size during a physical inventory could significantly impact required sizing of the non-destructive assay (NDA) laboratory as well as material handling capabilities. Several options are being considered, including (1) treating each storage location as a separate vault, (2) minimizing the number of items returned for quantitative analysis by optimizing the use of in situ confirmatory measurements, and (3) utilizing advanced monitoring technologies. Careful consideration of these parameters should allow us to achieve and demonstrate safe and secure storage while minimizing the impact on facility operations and without having to increase the size of the NDA laboratory beyond that required for anticipated shipping and receiving activities

Biocompatibility of biomaterials - Lessons learned and considerations for the design of novel materials.

Science.gov (United States)

Schmalz, Gottfried; Galler, Kerstin M

2017-04-01

Biocompatibility of dental materials has gained increasing interest during recent decades. Meanwhile, legal regulations and standard test procedures are available to evaluate biocompatibility. Herein, these developments will be exemplarily outlined and some considerations for the development of novel materials will be provided. Different aspects including test selection, release of substances, barriers, tissue healing, antibacterial substances, nanoparticles and environmental aspects will be covered. The provided information is mainly based on a review of the relevant literature in international peer reviewed journals, on regulatory documents and on ISO standards. Today, a structured and systematic approach for demonstrating biocompatibility from both a scientific and regulatory point of view is based on a clinical risk assessment in an early stage of material development. This includes the analysis of eluted substances and relevant barriers like dentin or epithelium. ISO standards 14971, 10993, and 7405 specify the modes for clinical risk assessment, test selection and test performance. In contact with breached tissues, materials must not impair the healing process. Antibacterial effects should be based on timely controllable substances or on repellant surfaces. Nanoparticles are produced by intraoral grinding irrespective of the content of nanoparticles in the material, but apparently at low concentrations. Concerns regarding environmental aspects of mercury from amalgam can be met by amalgam separating devices. The status for other materials (e.g. bisphenol-A in resin composites) needs to be evaluated. Finally, the public interest for biocompatibility issues calls for a suitable strategy of risk communication. A wise use of the new tools, especially the clinical risk assessment should aim at preventing the patients, professionals and the environment from harm but should not block the development of novel materials. However, biocompatibility must always be

Estimation of Resource Productivity and Efficiency: An Extended Evaluation of Sustainability Related to Material Flow

Directory of Open Access Journals (Sweden)

Pin-Chih Wang

2014-09-01

Full Text Available This study is intended to conduct an extended evaluation of sustainability based on the material flow analysis of resource productivity. We first present updated information on the material flow analysis (MFA database in Taiwan. Essential indicators are selected to quantify resource productivity associated with the economy-wide MFA of Taiwan. The study also applies the IPAT (impact-population-affluence-technology master equation to measure trends of material use efficiency in Taiwan and to compare them with those of other Asia-Pacific countries. An extended evaluation of efficiency, in comparison with selected economies by applying data envelopment analysis (DEA, is conducted accordingly. The Malmquist Productivity Index (MPI is thereby adopted to quantify the patterns and the associated changes of efficiency. Observations and summaries can be described as follows. Based on the MFA of the Taiwanese economy, the average growth rates of domestic material input (DMI; 2.83% and domestic material consumption (DMC; 2.13% in the past two decades were both less than that of gross domestic product (GDP; 4.95%. The decoupling of environmental pressures from economic growth can be observed. In terms of the decomposition analysis of the IPAT equation and in comparison with 38 other economies, the material use efficiency of Taiwan did not perform as well as its economic growth. The DEA comparisons of resource productivity show that Denmark, Germany, Luxembourg, Malta, Netherlands, United Kingdom and Japan performed the best in 2008. Since the MPI consists of technological change (frontier-shift or innovation and efficiency change (catch-up, the change in efficiency (catch-up of Taiwan has not been accomplished as expected in spite of the increase in its technological efficiency.

FUNCTIONAL MODEL OF THE MATERIAL RESOURCES MANAGEMENT FOR PROJECTS OF THE CREATION OF NEW TECHNIQUES

Directory of Open Access Journals (Sweden)

S. Yu. Danshyna

2016-01-01

Full Text Available The article is devoted to problem of material management arising in the implementation of projects for the development and creation (modernization of the new techniques. The uniqueness of the projects, their limit on the cost and time does not allow the use of traditional approaches to resource management. Such projects are often implemented in the development of companies; where it is not possible to abandon the traditional operating methods of management. The aim of the article is a formalization of the process of material management of projects, a description of its information flows for integrate into the project management practices and for improve the efficiency of material management. For the systematization of information arising from the material resources management, invited the set-theoretic representation of the management process. According with the requirements of project management standards were described the sets and defined rules of their transformation. Specification of the set-theoretic representation helped to establish the area and limits of the modelling process. Further decomposition process became the basis of the functional model, constructed in accordance with the methodology IDEF 0. A graphical representation of the model allows you to visualize the process at different levels of detail. For specification of issues related to the organization and promotion of material flow, were developed functional models of sub-processes and were described the identified data-flows. For the harmonization of process and project approaches formulated conditions for evaluating the efficiency of material management. The developed models can be the basis for designing the structure of companies, for regulation of their project activities, as well as for establishing an information system of management resources of projects.

INTRODUCTION OF THE PRINCIPLES OF A SUSTAINABLE DEVELOPMENT PRODUCTION OF BIODEGRADABLE PACKING FROM SECONDARY MATERIAL RESOURCES OF FOOD PRODUCTIONS

Directory of Open Access Journals (Sweden)

S. T. Antipov

2014-01-01

Full Text Available Summary. For increase of profitability of the food enterprises, decrease in an ecological trace from technogenic activity of the food industry the concept of development of low-waste and waste-free productions considered on the example of technology of receiving a biodegradable packing material from secondary material resources of food productions is offered: beer pellet, beet press, spirit bards, Pancake week press and bone glue. The technology of receiving biodegradable material from secondary material resources of food productions includes itself the following main stages: dehydration, crushing, mixing, leveling, formation, glazing. Advantage of the offered product consists of: - low cost of packing due to use of secondary material resources and full naturalness (now the raw materials for biodegradable packing specially are grown up on technical fields with use of GMO; - full decomposition in nature less than in 6 months according to GOST R 54533-2011 (EN 13432:2000 "Resource-saving. Packing. Requirements, criteria and the scheme of utilization of packing by means of a composting and biological decomposition"; - presence at the compost received at decomposition, the elements promoting increase of fertility of the soil. Application of technology allows reach at the same time three effects of a positive orientation: economic, ecological and social.

Schooling the Mean Girl: A Critical Discourse Analysis of Teacher Resource Materials

Science.gov (United States)

Bethune, Jennifer; Gonick, Marnina

2017-01-01

This paper is a critical discourse analysis of teacher resource materials about girl bullying. The "mean girl" phenomenon has been widely taken up as one of the current key narratives about schools and school girls. This paper argues for the importance of understanding the origins of this discourse within behavioural psychology, which…

Formation and development of theoretical principles for mineral resources logistics

Directory of Open Access Journals (Sweden)

Б. К. Плоткин

2017-03-01

Full Text Available Market transformations in Russia became foundations for formation and development of a new scientific and practical field in economics – logistics. Out of more than 30 existing definitions of logistics the authors according to their opinion have chosen the most appropriate. Logistics of mineral resources should be attributed to production (industrial logistics. It is a proven fact that processes of supply chain management in mining industry and its infrastructure in the framework of mineral resources chain have some fundamental distinctions. Importance of material resources recycling in theory and practice of mineral resources logistics has been highlighted. Special features of merchandise assortment and classifications in the mining industry have been examined in conjunction with substantial contents of material flow. Special consideration has been given to relevant issues in the field of price formation for mining produce, in the view of specific relations between its costs and logistic procurement of the industry. Moreover, questions of inventory control in the mining industry, activity of commodity exchanges, management of mining logistics system have been addressed.

The role of material/energy resources and dematerialisation in economic growth theories

Energy Technology Data Exchange (ETDEWEB)

Ayres, R.U. [Center for the Management of Environmental Resources INSEAD, Fountainebleau (France); Van den Bergh, J.C.J.M. [Department of Spatial Economics, Free University, Amsterdam (Netherlands)

2000-06-01

The nature of energy and material resources in an endogenous growth theory framework is clarified. This involves three modifications of the conventional theory. Firstly, multiple feedback mechanisms or 'growth engines' are identified. Secondly, a production function distinguishes between resource use, technical efficiency and value creation. Thirdly, the impact of the cost of production through demand on growth is accounted for. A formal model is analytically solved under a condition of a constant growth rate. Given model complexity, numerical experiments are performed as well, providing relevant insights to the academic and political debates on 'environmental Kuznets curves' and 'dematerialization'. 49 refs.

Material flow analysis for resource management towards resilient palm oil production

Science.gov (United States)

Kamahara, H.; Faisal, M.; Hasanudin, U.; Fujie, K.; Daimon, H.

2018-03-01

Biomass waste generated from palm oil mill can be considered not only as the feedstock of renewable energy but also as the nutrient-rich resources to produce organic fertilizer. This study explored the appropriate resource management towards resilient palm oil production by applying material flow analysis. This study was conducted based on two palm oil mills in Lampung, Indonesia. The results showed that the empty fruit bunch (EFB) has the largest potential in terms of amount and energy among the biomass waste. The results also showed that the palm oil mills themselves had already self-managed their energy consumption thatwas obtained from palm kernel shell and palm press fiber. Finally, this study recommended the several utilization options of EFB for improvement of soil sustainability to contribute towards resilient palm oil production.

Raw material monitoring assists companies. German Mineral Resources Agency at BGR provides information on global developments in resource markets

International Nuclear Information System (INIS)

2016-01-01

Germany is dependent on imports for its metalliferous natural resources. Although prices have been declining significantly in recent months, numerous raw materials such as platinum, cobalt and rare earth elements continue to be exposed to price and supply risks. To ensure that German industry can respond better to this situation in their procurement activities, the German Mineral Resources Agency (DERA) at BGR has developed a raw material monitoring system on behalf of the German government. DERA experts have con figured a screening method for the early identification of possible procurement risks. This is the platform which enables German companies to gain the specific advice they require. All of the most important information on this issue is bundled within DERA 's internet portal (www.deutsche-rohstoffagentur.de). BGR also provides its expertise in other important fields with great societal relevance. BGR has been advising the national commission on ''Storage of High-level Radioactive Waste'' since 2014. Due to their comprehensive research activities in the field of radioactive waste disposal, BGR scientists are important technical experts to which the commission can turn to for geological information and advice.

Sustainable hybrid photocatalysts: titania immobilized on carbon materials derived from renewable and biodegradable resources

Science.gov (United States)

This review comprises the preparation, properties and heterogeneous photocatalytic applications of TiO2 immobilized on carbon materials derived from earth-abundant, renewable and biodegradable agricultural residues and sea food waste resources. The overview provides key scientifi...

Cultural Resource Investigations for the Resumption of Transient Testing of Nuclear Fuels and Material at the Idaho National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Pace, Brenda R. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Williams, Julie B. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2013-11-01

The U. S. Department of Energy (DOE) has a need to test nuclear fuels under conditions that subject them to short bursts of intense, high-power radiation called ‘transient testing’ in order to gain important information necessary for licensing new nuclear fuels for use in U.S. nuclear power plants, for developing information to help improve current nuclear power plant performance and sustainability, for improving the affordability of new generation reactors, for developing recyclable nuclear fuels, and for developing fuels that inhibit any repurposing into nuclear weapons. To meet this mission need, DOE is considering alternatives for re-use and modification of existing nuclear reactor facilities to support a renewed transient testing program. One alternative under consideration involves restarting the Transient Reactor Test (TREAT) reactor located at the Materials and Fuels Complex (MFC) on the Idaho National Laboratory (INL) site in southeastern Idaho. This report summarizes cultural resource investigations conducted by the INL Cultural Resource Management Office in 2013 to support environmental review of activities associated with restarting the TREAT reactor at the INL. These investigations were completed in order to identify and assess the significance of cultural resources within areas of potential effect associated with the proposed action and determine if the TREAT alternative would affect significant cultural resources or historic properties that are eligible for nomination to the National Register of Historic Places. No archaeological resources were identified in the direct area of potential effects for the project, but four of the buildings proposed for modifications are evaluated as historic properties, potentially eligible for nomination to the National Register of Historic Places. This includes the TREAT reactor (building #), control building (building #), guardhouse (building #), and warehouse (building #). The proposed re-use of these historic

Teaching with Space: K-6 Aviation, Space and Technology Resource Guide

Science.gov (United States)

1998-01-01

Teaching with Space permits easy and quick identification of resources you will find most beneficial. This guide captures the essence of resources with applicability across the elementary curriculum. Specific product reviews and suggested uses in the classroom are provided to enable informed decision-making. Materials from NASA and the Federal Aviation Administration may be obtained in limited quantities at no cost from public domain sources when available. Pricing in this guide is based on duplication, warehousing, and overhead costs associated with distributing these items. Although this resource guide is a prototype guide distributed on a limited basis, we trust you will find it useful in locating quality instructional resources. Your suggestions and comments are most welcome, and will receive the fullest consideration as we work to expand and validate this guide for national distribution. Based on teacher criteria for quality, educational soundness, compatibility with the curriculum, ease of use, and affordability, the guide will be updated as new resources become available, and in response to teacher feedback. You may provide us with additional items for consideration at any time. We also are planning to develop a resource guide for middle and high school teachers, and your input is welcome for that effort too. This guide is just one way that space can help you in the classroom.

Renewable resources in industry. Industrial use of agricultural and wood raw materials in Germany. 3. compl. rev. ed.

Energy Technology Data Exchange (ETDEWEB)

Peters, Dietmar

2010-11-17

The ''Action Plan for the Industrial Use of Renewable Resources'' that was adopted by the German Federal Government in 2009 is an important impulse for promoting the industrial use of renewable resources parallel to their use for energy generation. The Action Plan sets forth a broad vision, not only for a significant and sustainable increase in the proportion of biomass used in industry but also for an improvement in the efficiency of biomass use in ensuring Germany's raw material supplies while taking into account the objectives and requirements of sustainability strategies. It also aims to secure and advance Germany's role as an international leader in the industrial use of renewable resources. This brochure provides an overview of the possible industrial uses of renewable resources in Germany and illustrates the important role that agricultural raw materials and wood already play in today's industry. (orig.)

ITER plasma facing materials. Some critical considerations

International Nuclear Information System (INIS)

Barabash, V.; Dietz, K.J.; Federici, G.; Janeschitz, G.; Matera, R.; Tanaka, S.

1995-01-01

The description of current status with the choice of materials for ITER plasma facing components is presented. The main problem with lifetime of divertor elements is the particle and energy-induced erosion of armour materials. A solution for the first operation phase consists in using Be as an armour for the first wall and the divertor, however other possible materials (e.g. W) could be considered. (orig.)

Considerations in the environmental assessment of resource projects

International Nuclear Information System (INIS)

Alvarez, P.R.

1999-01-01

A broad view is sketched of what needs to happen for Canada's petroleum industry to become a major player in Canada's emerging north, the Northwest Territories and the Yukon Territory. Industry needs to see more clarity and certainty about regulations and timelines, land claim settlements and their implementation, and the resolution of jurisdictional overlaps before it will commit the long-term investment dollars that will provide lasting and environmentally sustainable benefits for northeners. After years of being written off by many industry observers, the two territories have seen a sudden change recently. Oil and gas prices began to recover just when Chevron announced the results of its K-29 well, one of the most prolific wells in the Fort Liard area uncovering a reservoir containing up to 600 billion cubic feet of natural gas. Many companies are prospecting in the area. Given this vast potential, the question has to be asked: Why is so little money being spent developing these resources while billions are being spent in the frontier off Canada's east coast. The answer is location and timing. Some related problems of the lack of infrastructure and the shortage of trained workers are a natural phase of developing a new frontier. What resource development investors have difficulty tolerating is the ongoing uncertainty about access to the resource base and often protracted time for decisions. Such investors need to know clearly and quickly what are the rules, costs and timelines of doing business in the north. Industry in the north has to be responsible and sensitive to the environment and the unique culture and aspirations of northeners, and governments and regulatory bodies have to quickly and clearly simplify the approval process so that the petroleum industry is willing to risk the long-term investments needed to develop this new frontier

International Trade Drives Global Resource Use: A Structural Decomposition Analysis of Raw Material Consumption from 1990-2010.

Science.gov (United States)

Plank, Barbara; Eisenmenger, Nina; Schaffartzik, Anke; Wiedenhofer, Dominik

2018-04-03

Globalization led to an immense increase of international trade and the emergence of complex global value chains. At the same time, global resource use and pressures on the environment are increasing steadily. With these two processes in parallel, the question arises whether trade contributes positively to resource efficiency, or to the contrary is further driving resource use? In this article, the socioeconomic driving forces of increasing global raw material consumption (RMC) are investigated to assess the role of changing trade relations, extended supply chains and increasing consumption. We apply a structural decomposition analysis of changes in RMC from 1990 to 2010, utilizing the Eora multi-regional input-output (MRIO) model. We find that changes in international trade patterns significantly contributed to an increase of global RMC. Wealthy developed countries play a major role in driving global RMC growth through changes in their trade structures, as they shifted production processes increasingly to less material-efficient input suppliers. Even the dramatic increase in material consumption in the emerging economies has not diminished the role of industrialized countries as drivers of global RMC growth.

Facing Global Challenges with Materials Innovation

Science.gov (United States)

Rizzo, Fernando

2017-10-01

The path of society evolution has long been associated with a growing demand for natural resources and continuous environmental degradation. During the last decades, this pace has accelerated considerably, despite the general concern with the legacy being left for the next generations. Looking ahead, the predicted growth of the world population, and the improvement of life conditions in most regions, point to an increasing demand for energy generation, resulting in additional pressure on the Earth's sustainability. Materials have had a key role in decreasing the use of natural resources, by either improving efficiency of existing technologies or enabling the development of radical new ones. The greenhouse effect (CO2 emissions) and the energy crisis are global challenges that can benefit from the development of new materials for the successful implementation of promising technologies and for the imperative replacement of fossil fuels by renewable sources.

Basic considerations for the preparation of performance testing materials as related to performance evaluation acceptance criteria

International Nuclear Information System (INIS)

McCurdy, D.E.; Morton, J.S.

2001-01-01

The preparation of performance testing (PT) materials for environmental and radiobioassay applications involves the use of natural matrix materials containing the analyte of interest, the addition (spiking) of the analyte to a desired matrix (followed by blending for certain matrices) or a combination of the two. The distribution of the sample analyte concentration in a batch of PT samples will reflect the degree of heterogeneity of the analyte in the PT material and/or the reproducibility of the sample preparation process. Commercial and government implemented radioanalytical performance evaluation programs have a variety of acceptable performance criteria. The performance criteria should take into consideration many parameters related to the preparation of the PT materials including the within and between sample analyte heterogeneity, the accuracy of the quantification of an analyte in the PT material and to what 'known' value will a laboratory's result be compared. How sample preparation parameters affect the successful participation in performance evaluation (PE) programs having an acceptance criteria established as a percent difference from a 'known' value or in PE programs using other acceptance criteria, such as the guidance provided in ANSI N42.22 and N13.30 is discussed. (author)

Evaluation of a fungal collection as certified reference material producer and as a biological resource center

Directory of Open Access Journals (Sweden)

Tatiana Forti

2016-06-01

Full Text Available Abstract Considering the absence of standards for culture collections and more specifically for biological resource centers in the world, in addition to the absence of certified biological material in Brazil, this study aimed to evaluate a Fungal Collection from Fiocruz, as a producer of certified reference material and as Biological Resource Center (BRC. For this evaluation, a checklist based on the requirements of ABNT ISO GUIA34:2012 correlated with the ABNT NBR ISO/IEC17025:2005, was designed and applied. Complementing the implementation of the checklist, an internal audit was performed. An evaluation of this Collection as a BRC was also conducted following the requirements of the NIT-DICLA-061, the Brazilian internal standard from Inmetro, based on ABNT NBR ISO/IEC 17025:2005, ABNT ISO GUIA 34:2012 and OECD Best Practice Guidelines for BRCs. This was the first time that the NIT DICLA-061 was applied in a culture collection during an internal audit. The assessments enabled the proposal for the adequacy of this Collection to assure the implementation of the management system for their future accreditation by Inmetro as a certified reference material producer as well as its future accreditation as a Biological Resource Center according to the NIT-DICLA-061.

30 CFR 256.20 - Consideration of coastal zone management program.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Consideration of coastal zone management....20 Consideration of coastal zone management program. In the development of the leasing program, consideration shall be given to the coastal zone management program being developed or administered by an...

Information systems for the materials management department: stand-alone and enterprise resource planning systems.

Science.gov (United States)

2005-03-01

Materials management information systems (MMISs) incorporate information tools that hospitals can use to automate certain business processes, increase staff compliance with these processes, and identify opportunities for cost savings. Recently, there has been a push by hospital administration to purchase enterprise resource planning (ERP) systems, information systems that promise to integrate many more facets of healthcare business. We offer this article to help materials managers, administrators, and others involved with information system selection understand the changes that have taken place in materials management information systems, decide whether they need a new system and, if so, whether a stand-alone MMIS or an ERP system will be the best choice.

Regenerative raw materials. High technology without end; Nachwachsende Rohstoffe. Spitzentechnologie ohne Ende

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-11-03

In recent years, the use of renewable raw materials has developed rapidly. Meanwhile, biomass is one of the most important renewable energy source and a serious alternative to fossil fuel-based industry. The brochure under consideration presents an insight into the complex and promising topic ''Renewable Resources''. In particular, the areas in which renewable resources already are established as well as areas that need to be extended in the future are described.

Sustainability of coastal resource use in San Quintin, Mexico.

Science.gov (United States)

Aguirre-Muñoz, A; Buddemeier, R W; Camacho-Ibar, V; Carriquiry, J D; Ibarra-Obando, S E; Massey, B W; Smith, S V; Wulff, F

2001-05-01

San Quintin, Mexico, provides a useful site for integrated analyses of material fluxes and socioeconomic constraints in a geographically isolated system. Natural resource utilization on the land is dominated by groundwater exploitation for cultivation of horticulture crops (primarily tomatoes). Irrigation exceeds water recharge minus export by a factor of 6. Resource utilization in the bay is dominated by oyster culture; food for the oysters is provided by tidal exchange of bay and ocean water. Consideration of oyster respiration and system respiration suggests that the present level of aquaculture is about 40% of the sustainable level. A "physical unsustainability index" (PhUI) was developed to measure the proportional departure of utilization of the most limiting resource for sustainability: 6 on land; 0.4 in the bay. Based on PhUI and measures of economic development, we conclude that aquaculture is more viable than agriculture.

INIS-based Japanese literature materials of bibliographic tools for human resource development

International Nuclear Information System (INIS)

Kunii, Katsuhiko; Gonda, Mayuki; Ikeda, Kiyoshi; Nagaya, Shun; Itabashi, Keizo; Nakajima, Hidemitsu; Mineo, Yukinobu

2011-01-01

The Library of the Japan Atomic Energy Agency (JAEA) has developed two Japanese literature materials of bibliographic tools based on the International Nuclear Information System (INIS) of the IAEA which contains over 3.3 million records of 127 countries and 24 international organizations. These materials have been elaborated by appropriately designating Japanese terminology of nuclear field corresponding with English terminology or vice versa. One is 'Transliterated Japanese journal title list' and the other is 'INIS Thesaurus in Japanese'. While the former is served as a reference that enables users to access articles of Japanese journals better matching their needs, the latter is served as a dictionary to bridge the gap on nuclear field terminologies between over 30,000 English terms and Japanese terms which correspond with those in a semantic manner. The application of those materials to the INIS's full text collection over 280,000 of technical reports, proceedings etc. as an archive is helpful for enhancement of human resource development. The authors describe the effectiveness of those INIS-based materials with bibliographic references of Fukushima Daiichi NPS accident. (author)

Experimental characterization of thermal and hygric properties of hemp concrete with consideration of the material age evolution

Science.gov (United States)

Bennai, F.; Issaadi, N.; Abahri, K.; Belarbi, R.; Tahakourt, A.

2018-04-01

The incorporation of plant crops in construction materials offers very good hygrothermal performance to the building, ensuring substantial environmental and ecological benefits. This paper focuses on studying the evolution of hygrothermal properties of hemp concrete over age (7, 30 and 60 days). The analysis is done with respect to two main hygric and thermal properties, respectively: sorption isotherms, water vapor permeability, thermal conductivity and heat capacity. In fact, most of these parameters are very susceptible to change function of the age of the material. This influence of the aging is mainly due to the evolution of the microstructure with the binder hydration over time and the creation of new hydrates which can reduces the porosity of the material and consequently modify its properties. All the tested hemp concrete samples presented high moisture storage capacity and high-water vapor permeability whatever the age of such hygroscopic material. These hygric parameters increase significantly for high relative humidity requiring more consideration of such variability during the modeling of coupled heat and mass transfer within the material. By the same, the thermal conductivity and heat capacity tests highlighted the impact of the temperature and hygric state of the studied material.

Material and design considerations of FBGA reliability performance

International Nuclear Information System (INIS)

Lee, Teck Kheng; Ng, T.C.; Chai, Y.M.

2004-01-01

FBGA package reliability is usually assessed through the conventional approaches of die attach and mold compound material optimization. However, with the rapid changes and fast-moving pace of electronic packaging and the introduction of new soldermask and core materials, substrate design has also become a critical factor in determining overall package reliability. The purpose of this paper is to understand the impact design and soldermask material of a rigid substrate on overall package reliability. Three different soldermask patterns with a matrix of different die attach, mold compound, and soldermask materials are assessed using the moisture sensitivity test (MST). Package reliability is also assessed through the use of temperature cycling (T/C) at conditions 'B' and 'C'. For material optimization, three different mold compounds and die attach materials are used. Material adhesion between different die attach materials and soldermask materials are obtained through die shear performed at various temperatures and preset moisture conditions. A study correlating the different packaging material properties and their relative adhesion strengths with overall package reliability in terms of both MST and T/C performance was performed. Soldermask design under the die pads was found to affect package reliability. For example, locating vias at the edge of the die is not desirable because the vias acts as initiation point for delamination and moisture-induced failure. Through die shear testing, soldermask B demonstrated higher adhesion properties compared to soldermask A across several packaging materials and enhanced the overall package reliability in terms of both MST and T/C performance. Both MST JEDEC level 1 and the T/C of 'B' and 'C' at 1000 cycles have been achieved through design and package material optimization

Renewable resources in industry. Industrial use of agricultural and wood raw materials in Germany. 3. compl. rev. ed.

Energy Technology Data Exchange (ETDEWEB)

Peters, Dietmar

2010-11-17

The ''Action Plan for the Industrial Use of Renewable Resources'' that was adopted by the German Federal Government in 2009 is an important impulse for promoting the industrial use of renewable resources parallel to their use for energy generation. The Action Plan sets forth a broad vision, not only for a significant and sustainable increase in the proportion of biomass used in industry but also for an improvement in the efficiency of biomass use in ensuring Germany's raw material supplies while taking into account the objectives and requirements of sustainability strategies. It also aims to secure and advance Germany's role as an international leader in the industrial use of renewable resources. This brochure provides an overview of the possible industrial uses of renewable resources in Germany and illustrates the important role that agricultural raw materials and wood already play in today's industry. (orig.)

Development of a leadership resource pack

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The pack contains notes and presentation material for OSD inspectors to help them prepare for health and safety discussions with senior managers. The successful application of the leadership resource pack depends on an inspector gaining familiarity with the contents of the pack. Flexibility and adaptability were considered crucial factors in developing the contents. The pack is not considered a substitute for an inspector's own experience, knowledge or substitute for prior research. The leadership resource pack is intended as a source of knowledge and good practice that demonstrates how positive leadership can drive a health and safety agenda alongside business considerations. The benefits of the leadership resource pack include: the creation of a flexible tool that inspectors can use to highlight key leadership messages in health and safety; the development of a seven-stage model for characterising senior management commitment; practical examples of how leadership in health and safety management was felt throughout nine organisations; ideas for devising an aide memoire for specific discussions with senior managers. (author)

VII Russian annual conference of young scientists and postgraduate students Physical chemistry and technology of inorganic materials. Collection of materials

International Nuclear Information System (INIS)

Tsvetkov, Yu.V.

2010-01-01

The materials of the VII Russian annual conference of young scientists and postgraduate students Physical chemistry and technology of inorganic materials, held 8-11 November 2010 in Moscow, are presented. Structure and properties of high-strength nanostructured metal and composite materials, development of research methods and simulation of the structure and properties of materials and nanomaterials, functional ceramic and composite nanomaterials - in sight of the participants. The problems of physicochemical principles and processes for new technologies and forming powder materials and nanomaterials, physicochemical bases of production and processing of advanced inorganic materials, physical chemistry and technology of energy-, resource-saving and environmentally friendly processes for ferrous, non-ferrous and rare metals are under consideration. Promising composite coatings and nanostructured films of functional purposes, physicochemical bases of new processes of shaping and forming of materials and nanomaterials are discussed [ru

Material and design considerations of FBGA reliability performance

Energy Technology Data Exchange (ETDEWEB)

Lee, Teck Kheng; Ng, T.C.; Chai, Y.M

2004-09-01

FBGA package reliability is usually assessed through the conventional approaches of die attach and mold compound material optimization. However, with the rapid changes and fast-moving pace of electronic packaging and the introduction of new soldermask and core materials, substrate design has also become a critical factor in determining overall package reliability. The purpose of this paper is to understand the impact design and soldermask material of a rigid substrate on overall package reliability. Three different soldermask patterns with a matrix of different die attach, mold compound, and soldermask materials are assessed using the moisture sensitivity test (MST). Package reliability is also assessed through the use of temperature cycling (T/C) at conditions 'B' and 'C'. For material optimization, three different mold compounds and die attach materials are used. Material adhesion between different die attach materials and soldermask materials are obtained through die shear performed at various temperatures and preset moisture conditions. A study correlating the different packaging material properties and their relative adhesion strengths with overall package reliability in terms of both MST and T/C performance was performed. Soldermask design under the die pads was found to affect package reliability. For example, locating vias at the edge of the die is not desirable because the vias acts as initiation point for delamination and moisture-induced failure. Through die shear testing, soldermask B demonstrated higher adhesion properties compared to soldermask A across several packaging materials and enhanced the overall package reliability in terms of both MST and T/C performance. Both MST JEDEC level 1 and the T/C of 'B' and 'C' at 1000 cycles have been achieved through design and package material optimization.

Technical considerations in materials management policy development

International Nuclear Information System (INIS)

Avci, H.; Goldberg, M.

1996-01-01

Under the Materials-in-Inventory (MIN) initiative, US DOE intends to develop policies to ensure that materials are managed and use efficiently, cost-effectively, and safely throughout DOE. The MIN initiative covers depleted uranium, scrap metals, chemicals, explosives, spent nuclear fuel, lead, alkali metals, etc.; by far the largest component is depleted uranium hexafluoride (DUF6). A technically defensible approach has been developed and is being used to select a long-term management strategy for DOE's DUF6 inventory. The same approach can be adapted to management of other materials in inventory that have the potential to be reutilized

Materials considerations relative to multibarrier waste isolation

International Nuclear Information System (INIS)

McCoy, H.E.; Griess, J.C.

1981-07-01

The environmental conditions associated with the storage of radioactive wastes are reviewed, and the corrosion of potential waste containment materials under these conditions is evaluated. The desired service life of about 1000 years is beyond the time period for which existing corrosion data can be extrapolated with certainty; however, titanium alloys seem to offer the most promise. The mechanical requirements for canisters and overpacks are considered and several candidate materials are selected. Designs for a canister and an overpack have been developed, and these are used to estimate the costs for three possible materials of construction

Container material and design considerations for storage of low-level radioactive waste

International Nuclear Information System (INIS)

Temus, C.J.

1987-01-01

With the threat of increased burial site restrictions and increased surcharges; the ease with which waste is sent to the burial site has been reduced. For many generators of waste the only alternative after maximizing volume reduction efforts is to store the waste. Even after working through the difficult decision of deciding what type of storage facility to have, the decision of what type of container to store the waste in has to still be made. This paper explores the many parameters that affect not only the material selection but also the design. The proper selection of materials affect the ability of the container to survive the storage period. The material selection also directly affects the design and utilization of the storage facility. The impacts to the facility include the functional aspects as well as its operational cost and liability as related to such things as fire insurance and active environmental control systems. The advantages and disadvantages of many of the common systems such as carbon steel, various coatings, polyethylene, stainless steel, composites and concrete will be discussed and evaluated. Recognizing that the waste is to be disposed of in the future differentiates it from waste that is shipped directly to the disposal site. The stored waste has to have the capability to be handled not only once like the disposal site waste but potentially several times before ultimate disposal. This handling may be by several different systems both at the storage facility and the burial site. Some of these systems due to ALARA considerations are usually remote requiring various interfaces, while not interfering with handling, transportation or disposal operations

Decommissioning of Nuclear Facilities: Training and Human Resource Considerations

International Nuclear Information System (INIS)

2008-01-01

One of the cornerstones of the success of nuclear facility decommissioning is the adequate competence of personnel involved in decommissioning activities. The purpose of this publication is to provide methodological guidance for, and specific examples of good practices in training as an integral part of human resource management for the personnel performing decommissioning activities. The use of the systematic methodology and techniques described in this publication may be tailored and applied to the development of training for all types of nuclear facilities undergoing decommissioning. Examples of good practices in other aspects of human resources, such as knowledge preservation, management of the workforce and improvement of human performance, are also covered. The information contained in this publication, and the examples provided in the appendices and enclosed CD-ROM, are representative of the experience of decommissioning of a wide variety of nuclear facilities.

Translators’ Use of Digital Resources during Translation

DEFF Research Database (Denmark)

Hvelplund, Kristian Tangsgaard

2017-01-01

This paper presents the findings from a study on translators’ use of digital resources during the translation process. Eye tracking data and screen recording data from 18 professional translators are analysed in order to 1) examine how much time translators spend on digital resource consultation...... compared with translation drafting and translation revision, 2) examine how eye movements differ between translation drafting, revision and digital resource consultation and 3) investigate what types of digital resources are used by translators. The findings demonstrate that digital resource consultation...... constitutes a considerable amount of the translation process. The findings also show longer fixations and larger pupils during resource consultation, indicating heavier cognitive load, and finally the study identifies considerable variation in the use of resources between translators....

Ecologia: Spanish Ecology Packet Resource Units and Materials for Intermediate and Advanced Spanish Classes.

Science.gov (United States)

Bell, Mozelle Sawyer; Arribas, E. Jaime

This Spanish ecology packet contains resource units and materials for intermediate and advanced Spanish classes. It is designed to be used for individual and small-group instruction in the senior high school to supplement the Spanish language curriculum. Included are articles, pictures, and cartoons from Spanish-language newspapers and magazines…

Material resources, energy, and nutrient recovery from waste: are waste refineries the solution for the future?

DEFF Research Database (Denmark)

Tonini, Davide; Martinez-Sanchez, Veronica; Astrup, Thomas Fruergaard

2013-01-01

Waste refineries focusing on multiple outputs of material resources, energy carriers, and nutrients may potentially provide more sustainable utilization of waste resources than traditional waste technologies. This consequential life cycle assessment (LCA) evaluated the environmental performance....... Overall, the waste refinery provided global warming (GW) savings comparable with efficient incineration, MBT, and bioreactor landfilling technologies. The main environmental benefits from waste refining were a potential for improved phosphorus recovery (about 85%) and increased electricity production (by...

Evaluation of a fungal collection as certified reference material producer and as a biological resource center.

Science.gov (United States)

Forti, Tatiana; Souto, Aline da S S; do Nascimento, Carlos Roberto S; Nishikawa, Marilia M; Hubner, Marise T W; Sabagh, Fernanda P; Temporal, Rosane Maria; Rodrigues, Janaína M; da Silva, Manuela

2016-01-01

Considering the absence of standards for culture collections and more specifically for biological resource centers in the world, in addition to the absence of certified biological material in Brazil, this study aimed to evaluate a Fungal Collection from Fiocruz, as a producer of certified reference material and as Biological Resource Center (BRC). For this evaluation, a checklist based on the requirements of ABNT ISO GUIA34:2012 correlated with the ABNT NBR ISO/IEC17025:2005, was designed and applied. Complementing the implementation of the checklist, an internal audit was performed. An evaluation of this Collection as a BRC was also conducted following the requirements of the NIT-DICLA-061, the Brazilian internal standard from Inmetro, based on ABNT NBR ISO/IEC 17025:2005, ABNT ISO GUIA 34:2012 and OECD Best Practice Guidelines for BRCs. This was the first time that the NIT DICLA-061 was applied in a culture collection during an internal audit. The assessments enabled the proposal for the adequacy of this Collection to assure the implementation of the management system for their future accreditation by Inmetro as a certified reference material producer as well as its future accreditation as a Biological Resource Center according to the NIT-DICLA-061. Copyright © 2016 Sociedade Brasileira de Microbiologia. Published by Elsevier Editora Ltda. All rights reserved.

Collegiality and commerce: The culture of consideration amongst engineers

Science.gov (United States)

Nugent, Paul David

This study is a participant observation ethnography of engineering relationships at a defense contracting plant that specializes in the design and manufacture of launch control systems for nuclear submarines. "Consideration" is presented as a unique mode of interaction enabling resource exchange and pivotal in developing and strengthening work relationships. Consideration differs from other modes of exchange such as markets, gift-giving, and charity primarily in that the bestowal of the resource involves little sacrifice. The manner in which consideration is enacted by the engineers, the structural and cultural conditions supporting consideration, and the social and economic consequences of consideration are presented. From these findings it is concluded that consideration is a unique form of economic exchange embedded in concrete relationships that forces us to rethink and extend current conceptualizations of trust, networks, social capital, and friendship in the workplace. The data for the analysis were drawn from twenty interviews and fieldnotes collected and transcribed over a twelve month period. Quotations from the interviews and exerpts from the fieldnotes are included to illustrate claims being made in the analysis as well as to familiarize the reader with the culture developed by engineers and managers in a defense contracting plant.

Beam energy variability and other system considerations for a deuteron linac materials research neutron source

International Nuclear Information System (INIS)

Jameson, R.A.

1989-01-01

There are many overall system aspects and tradeoffs that must be considered in the design of a deuteron linac based neutron source for materials research, in order to obtain a facility with the best possible response to the user's needs, efficient and reliable operation and maintenance, at the optimum construction and operating cost. These considerations should be included in the facility design from the earliest conceptual stages, and rechecked at each stage to insure consistency and balance. Some of system requirements, particularly that of beam energy variability and its implications, are outlined in this talk. (author)

The importance of material resources and qualified trainers in adult non-formal education and training centres in South Africa

Science.gov (United States)

Mayombe, Celestin; Lombard, Antoinette

2016-04-01

Non-formal education and training (NFET) programmes in public and private centres in South Africa aim to meet the training needs of adults who have been deprived of formal education which would have fostered skills acquisition and access to employment earlier in their lives. The concern which informs this paper is that adults who face long-term unemployment due to a lack of marketable skills often remain unemployed after completing NFET programmes. The paper assesses the extent to which material and human resources have affected skills acquisition and graduate employment in KwaZulu-Natal, South Africa. The results show that material and human resource challenges in most public and some private centres have led to gaps in skills training. Programmes focus too strongly on academic credits and certificates and not enough on employment as an end goal. The authors argue that the existence of suitable training materials and qualified trainers with practical experience and specific technical skills constitutes favourable conditions ("enabling environments") for graduate employment. Without improvement in material and human resources, adult trainees will continue to experience difficulties integrating into the labour market, and the cycle of poverty and social exclusion will remain unbroken.

CONSIDERATIONS FOR THE MASS AND ENERGY INTEGRATION IN THE SUGAR PROCESS PRODUCTION AND DERIVATIVE PROCESS

Directory of Open Access Journals (Sweden)

Dennis Abel Clavelo Sierra

2015-04-01

Full Text Available The current society needs now more than ever of industries that create new forms and methods where the saving of energy and materials is a fundamental aspect. For this reason, in the present investigation we present an outline with the considerations for the integration of the processes of sugar and other derived products, in an outline of bio refinery with the objective of achieving efficient processes with an appropriate use of the material resources and an efficient use of the energy, with minimum operation costs and investment. In the outline we take as base for the study, it is considered that the integrated complex has as basic input the sugarcane; it is also considered the variation of the prices of the products in the market. In the article we make an outline with the precise steps for the development of a methodology that allows analyzing the processes involved in the biorefinery outline and in this way to identify the common material and energy resources that the processes exchange. A heuristic diagram is presented that guides the strategy to continue for it.

Digital resources and low cost of teaching materials for astronomical education

Science.gov (United States)

Paladino, L.; Voelzke, M. R.

2017-12-01

This work presents the results of the application of two questionnaires about Astronomical concepts in three classes in the first year High School of a public school in the periphery of São Paulo. In the first questionnaire was verified the prior knowledge of students. Then the intervention strategies were carried out: use of digital resources of the school, construction of mock-ups using low cost materials and the use of educational books, such as Couper & Henbest (1997), Horvath (2008). After four months, the second questionnaire was applied to verify the occurence of meaningful learning.

Material evidence in a digital context

DEFF Research Database (Denmark)

Egholm Pedersen, Ole

2012-01-01

, but also in the restrictions within an industrial production line. This article presents a method of experimentation with precast concrete, where prototyping using technologies suitable for industrial production provide the parameters for a parallel process of digital form-finding. The method takes its...... al. 2003), and considerations of the sustainability of resources (Cradle to Cradle: McDohnoug & Braungart 2002) as a basis for addressing the relationship between material and technology. The paper argues that this method can support the development of unique architectural elements that challenge...

Managing nuclear knowledge: IAEA activities and international coordination. Including resource material full text CD-ROM

International Nuclear Information System (INIS)

2005-06-01

The present CD-ROM summarizes some activities carried out by the Departments of Nuclear Energy and Nuclear Safety and Security in the area of nuclear knowledge management in the period 2003-2005. It comprises, as open resource, most of the relevant documents in full text, including policy level documents, reports, presentation material by Member States and meeting summaries. The collection starts with a reprint of the report to the IAEA General Conference 2004 on Nuclear Knowledge [GOV/2004/56-GC(48)/12] summarizing the developments in nuclear knowledge management since the 47th session of the General Conference in 2003 and covers Managing Nuclear Knowledge including safety issues and Information and Strengthening Education and Training for Capacity Building. It contains an excerpt on Nuclear Knowledge from the General Conference Resolution [GC(48)/RES/13] on Strengthening the Agency's Activities Related to Nuclear Science, Technology and Applications. On the CD-ROM itself, all documents can easily be accessed by clicking on their titles on the subject pages (also printed at the end of this Working Material). Part 1 of the CD-ROM covers the activities in the period 2003-2005 and part 2 presents a resource material full text CD-ROM on Managing Nuclear Knowledge issued in October 2003

DEVELOPMENT OFINDICATORSFOR EFFECTIVE USE OF INTERIMMATERIAL RESOURCES

Directory of Open Access Journals (Sweden)

Klimuk V. V.

2014-03-01

Full Text Available The article provides the developed methodology of the midterm evaluation of the efficiency of use of material resources. Proposed system of indicators for tracking and monitoring of the efficiency of the production process. The author analyzes literary sources on the problem of the estimation of efficiency of use of material resources, we study the opinions of economists. The author summarizes the observational information and provides conclusions expressed in the reflection of the urgency of forming the system of the midterm evaluation of the efficiency of use of material resources. the traditional system assessment, the method of using of which is presented in the works of scientists, does not contain indicators reflecting the interim targets with the aim of forming a preliminary picture of the future condition of efficiency of use of material resources, on the basis of the quarterly rate of change of the level of material consumption, comparing them to the beginning and end of the time period, the balance of the stock of material resources, mapping the rate of change of the volume of production and the rate of change of material costs, matching the pace of change of volume of purchases of material resources and the pace of changes in the value of material resources, the Author proposes indicators: the rate of change of material capacity for 4 quarter, comparison of the rates of change in material consumption in the 1st and 4th quarters, the balance of the stock of material resources, the rate of change of the volume of production and material costs by quarter, the comparison of the rate of change of volume of purchases of material resources with the pace of changes in the value of material resources by quarter. The theoretical significance of the test is to use the author of the material as an additional reading course of lectures on economic subjects, practical significance - the inclusion of a set of indicators developed as a tool

Cyanobacteria and Microalgae: Thermoeconomic Considerations in Biofuel Production

Directory of Open Access Journals (Sweden)

Umberto Lucia

2018-01-01

Full Text Available In thermodynamics, the useful work in any process can be evaluated by using the exergy quantity. The analyses of irreversibility are fundamental in the engineering design and in the productive processes’ development in order to obtain the economic growth. Recently, the use has been improved also in the thermodynamic analysis of the socio-economic context. Consequently, the exergy lost is linked to the energy cost required to maintain the productive processes themselves. The fundamental role of the fluxes and the interaction between systems and their environment is highlighted. The equivalent wasted primary resource value for the work-hour is proposed as an indicator to support the economic considerations on the biofuel production by using biomass and bacteria. The equivalent wasted primary resource value for the work-hour is proposed as an indicator to support the economic considerations of the biofuel production by using biomass and bacteria. Moreover, the technological considerations can be developed by using the exergy inefficiency. Consequently, bacteria use can be compared with other means of biofuel production, taking into account both the technologies and the economic considerations. Cyanobacteria results as the better organism for biofuel production.

Considerations for Contractile Electroactive Materials and Actuators

International Nuclear Information System (INIS)

Rasmussen, Lenore; Schramm, David; Meixler, Lewis D.; Gentile, Charles A.; Ascione, George; Tilson, Carl; Pagdon, Kelsey

2010-01-01

Ras Labs produces electroactive polymer (EAP) based materials and actuators that bend, swell, ripple, and now contract (new development) with low electric input. In addition, Ras Labs produces EAP materials that quickly contract and expand, repeatedly, by reversing the polarity of the electric input. These recent developments are important attributes in the field of electroactivity because of the ability of contraction and contraction-expansion to produce biomimetric motion. The mechanism of contraction is not well understood. Radionuclide-labeled experiments were conducted to determine the mechanisms during contraction of these EAPs.

Rationale for using integrated enzymatic preparation for receiving food fibers from secondary resources of vegetable material processing

Directory of Open Access Journals (Sweden)

Alimov A. V.

2016-09-01

Full Text Available The purpose of the work is to establish some rational modes of receipt of the food fibers (FF from secondary resources of vegetable raw materials. Studying chemical properties of research objects has been carried out by standard methods in accordance with the GOST 26183–84, GOST 7636–85, GOST 25555.3–82, GOST 28561–90. Determination of reducing and not reducing sugars content has been performed by the cyanide method; determination of pectinaceous substances' content – by the calcium-pectate method. As an enzyme medicine the earlier not studied complex enzyme medicine of proteolytic and amilolytic action of Bacillus subtilis and Penicillium emersonii cultures has been tested. Studying heat stability of complex enzyme medicine has been carried out at varying of the hydrolysis temperature from 40 °C to 80 °C. The fractional composition of carbohydrates of secondary resources of aubergines, vegetable marrows and onions conversion has been researched. Content of FF (cellulose, gemitsellyuloza, pectin in waste from conversion of vegetable marrows constitutes 42 % of general content of carbohydrates, aubergines – 39,2 %, and onion – 30,4 %. Chemical and carbohydrate structures of secondary resources of vegetable raw materials allow consider them as FF source, and also shows feasibility of their conversion without fractionation by the form of secondary resources. The rational modes of hydrolysis of vegetable raw materials secondary resources' mix for removing the accompanying organic compounds have been determined. The maximum proteolytic activity of enzyme medicine takes place at the temperature of 50 °C, amilolytic activity – at 70 °C. In case of рН increase from 2.0 to 6.0 proteolytic and amilolytic activity reaches the maximum and constitutes 94 % and 95 % respectively, in case of further increase рН the activity decreases. The rational value of рН of reactionary environment when carrying out enzymatic hydrolysis in the

Cultural Resource Investigation for the Materials and Fuels Complex Wastewater System Upgrade at the Idaho National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Brenda R. Pace; Julie B raun Williams; Hollie Gilbert; Dino Lowrey; Julie Brizzee

2010-05-01

The Materials and Fuels Complex (MFC) located in Bingham County at the Idaho National Laboratory (INL) in southeastern Idaho is considering several alternatives to upgrade wastewater systems to meet future needs at the facility. In April and May of 2010, the INL Cultural Resource Management Office conducted archival searches, archaeological field surveys, and coordination with the Shoshone-Bannock Tribes to identify cultural resources that may be adversely affected by the proposed construction and to provide recommendations to protect any resources listed or eligible for listing on the National Register of Historic Places. These investigations showed that one National Register-eligible archaeological site is located on the boundary of the area of potential effects for the wastewater upgrade. This report outlines protective measures to help ensure that this resource is not adversely affected by construction.

Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume III. Resources and fuel cycle facilities

International Nuclear Information System (INIS)

1980-06-01

The ability of uranium supply and the rest of the nuclear fuel cycle to meet the demand for nuclear power is an important consideration in future domestic and international planning. Accordingly, the purpose of this assessment is to evaluate the adequacy of potential supply for various nuclear resources and fuel cycle facilities in the United States and in the world outside centrally planned economy areas (WOCA). Although major emphasis was placed on uranium supply and demand, material resources (thorium and heavy water) and facility resources (separative work, spent fuel storage, and reprocessing) were also considered

A theory of economic growth with material/energy resources and dematerialization: interaction of three growth mechanisms

NARCIS (Netherlands)

Ayes, R.U.; van den Bergh, J.C.J.M.

2005-01-01

The nature of energy and material resources in a non-optimizing growth theory framework is clarified. This involves two modifications of the conventional theory. Firstly, multiple feedback mechanisms or "growth engines" are identified, such that the impact of the cost of production through demand on

INVESTMENT ASPECT IN MATERIAL INCENTIVE OF HUMAN RESOURCES

Directory of Open Access Journals (Sweden)

Potasheva Galina Anatol’evna

2017-03-01

Full Text Available Value of intellectual resources in modern economy due to which the assets of human resources became one of the factors of formation of value of systems on the basis of their investing, is considered. Adequate evaluation of employees’ activities as one of the basic resources will make it possible to meet competition under conditions of "survival" through periodic formation of socio-economic profile and stimulation of investment in human resources on the basis of the following technologies: formation of a balanced scorecard system, creation of a mechanism of formation and distribution of labour compensation funds, use of the golden section principle. Establishment of wages according to the golden section principle contributes to the stability and commitment of employees and increase of efficiency of investments in human resources, provided that it doubles the sales volume and should accordingly increase the wages of each employee by a factor of 1.62. Statistical analysis demonstrated that organizations that work using the golden section principle increased the labour productivity on average by 10-20 %, augmented the turnover by a factor of 1.3–1.5, minimized the costs by 15-20 %. Application of the golden section technology creates conditions necessary for economic growth on the basis of efficiency of investments in human resources.

Efficiency of raw materials. Relief of the economy, environmental protection; Rohstoffeffizienz. Wirtschaft entlasten, Umwelt schonen

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-11-15

In the contribution under consideration, the Federal Statistical Office (Wiesbaden, Federal Republic of Germany) and the Federal Environmental Agency (Dessau-Rosslau, Federal Republic of Germany) present actual data and analyses from environmentally economic total computations. In Germany, the use of raw materials became more efficient. Thus, 580 tons of raw materials per million Euro of gross domestic product were needed in the year 2008, while still 680 tons of raw materials were needed in the year 2000. The economical handling of natural resources relieves the environment and enables economic chances for individual companies and national economy. The lowering of environmental effects is to be in the focus of withdrawal and use of raw materials. This requires a stronger reduction of the consumption of raw materials. Savings potentials and an increased efficiency must be aspired in the short and medium term. The politics must create suitable incentives and framework conditions. The contribution under consideration presents new activities and strategies in order to achieve these targets.

Guidance and considerations for the implementation of INFCIRC/225/Rev.4, the physical protection of nuclear material and nuclear facilities

International Nuclear Information System (INIS)

2000-05-01

This publication is intended to provide guidance and considerations for a State's competent authority to better understand and prescribe appropriate requirements, consistent with INFCIRC/225/Rev.4 for the protection of nuclear material and nuclear facilities which are compatible with accepted international practice. This report, together with a more detailed report, Handbook on the Physical Protection of Nuclear Material and Facilities, which addresses to the licencee or designer of physical protection systems who has specific implementation and compliance responsibilities, should be used in conjunction to each other to provide better and comprehensive guidance on physical protection

Guidance and considerations for the implementation of INFCIRC/225/Rev.4, the physical protection of nuclear material and nuclear facilities

International Nuclear Information System (INIS)

2002-05-01

This publication is intended to provide guidance and considerations for a State's competent authority to better understand and prescribe appropriate requirements, consistent with INFCIRC/225/Rev.4 for the protection of nuclear material and nuclear facilities which are compatible with accepted international practice. This report, together with a more detailed report, Handbook on the Physical Protection of Nuclear Material and Facilities, which addresses to the licensee or designer of physical protection systems who has specific implementation and compliance responsibilities, should be used in conjunction to each other to provide better and comprehensive guidance on physical protection

Raw Materials Synthesis from Heavy Metal Industry Effluents with Bioremediation and Phytomining: A Biomimetic Resource Management Approach

Directory of Open Access Journals (Sweden)

Salmah B. Karman

2015-01-01

Full Text Available Heavy metal wastewater poses a threat to human life and causes significant environmental problems. Bioremediation provides a sustainable waste management technique that uses organisms to remove heavy metals from contaminated water through a variety of different processes. Biosorption involves the use of biomass, such as plant extracts and microorganisms (bacteria, fungi, algae, yeast, and represents a low-cost and environmentally friendly method of bioremediation and resource management. Biosorption-based biosynthesis is proposed as a means of removing heavy metals from wastewaters and soils as it aids the development of heavy metal nanoparticles that may have an application within the technology industry. Phytomining provides a further green method of managing the metal content of wastewater. These approaches represent a viable means of removing toxic chemicals from the effluent produced during the process of manufacturing, and the bioremediation process, furthermore, has the potential to save metal resources from depletion. Biomimetic resource management comprises bioremediation, biosorption, biosynthesis, phytomining, and further methods that provide innovative ways of interpreting waste and pollutants as raw materials for research and industry, inspired by materials, structures, and processes in living nature.

15 CFR 971.502 - Conservation of resources.

Science.gov (United States)

2010-01-01

... ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR COMMERCIAL RECOVERY PERMITS Resource Development... restrictions relating to conservation of resources, he will employ a balancing process in the consideration of... potential use of any waste, the environmental effects of the recovery activities, economic and resource data...

Technical considerations for detection of and response to illicit trafficking in radioactive materials

International Nuclear Information System (INIS)

Duftschmid, K.E.; Arlt, R.; Cunningham, J.; Gayral, J.P.; Kravchenko, N.; Smith, D.; York, R.

2001-01-01

it is illicit or 'innocent'. Innocent materials are typically medical radionuclides administered to patient, legal shipments or naturally occurring radioactive materials (NORM). If the radiological hazard is significant, neutron radiation is observed, indicating the presence of nuclear materials or mechanical damage of the item containing the source raises suspicion of contamination, it will be necessary to adopt a tactical response mechanism. A detailed generic model has been developed for a tactical response plan including incident command structures, cordon control areas, casualty handling at the scene, requirements for seizure and temporary storage of radioactive materials, considerations on liaison with the media and incident investigation techniques. Further important information relates to mitigation of health hazards, casualty management, needs for planning, equipment and training, transport arrangements for radioactive materials, decontamination procedures and hints for working with the media. (author)

77 FR 71842 - Exemption of Material for Proposed Disposal Procedures at the US Ecology Idaho Resource...

Science.gov (United States)

2012-12-04

... Proposed Disposal Procedures at the US Ecology Idaho Resource Conservation and Recovery Act Subtitle C... water solidified with clay containing low-activity radioactive material, at the US Ecology Idaho (USEI... and 10 CFR 70.17 Exemption of Humboldt Bay Power Plant Waste For Disposal at US Ecology, Inc'' [ADAMS...

Wonderful Things? A Consideration of 3D Modelling of Objects in Material Culture Research

Directory of Open Access Journals (Sweden)

Molloy Barry

2018-04-01

Full Text Available The role of 3D modelling in archaeology is increasing exponentially, from fieldwork to architecture to material culture studies. For the study of archaeological objects the roles of digital and print models for public engagement has been much considered in recent literature. For model makers, focus has typically been placed on exceptional and visually striking objects with inherent appeal. In contrast, this paper explores some of the potential roles for 3D digital models for routine artefact research and publication. Particular emphasis is placed on the challenges this technology raises for archaeological theory and practice. Following a consideration of how 3D models relate to established illustration and photographic traditions, the paper evaluates some of the unique features of 3D models, focussing on both positive and negative aspects of these. This is followed by a discussion of the role of potential research connections between digital and craft models in experimental research. Our overall objective is to emphasise a need to engage with the ways in which this gradual development has begun to change aspects of longestablished workflows. In turn, the increasing use of this technology is argued to have wider ramifications for the development of archaeology, and material culture studies in particular, as a discipline that requires reflection.

Polymeric materials from renewable resources

Energy Technology Data Exchange (ETDEWEB)

Frollini, Elisabete; Rodrigues, Bruno V. M.; Silva, Cristina G. da; Castro, Daniele O.; Ramires, Elaine C.; Oliveira, Fernando de; Santos, Rachel P. O. [Macromolecular Materials and Lignocellulosic Fibers Group, Center for Research on Science and Technology of BioResources, Institute of Chemistry of São Carlos, University of São Paulo, CP 780, 13560-970 São Carlos, São Paulo (Brazil)

2016-05-18

The goals of our studies have been the use of renewable raw materials in the preparation of polymeric materials with diversified properties. In this context, lignosulfonate, which is produced in large scale around the world, but not widely used in the production of polymeric materials, was used to replace phenol and polyols in the preparation of phenolic- (Ligno-PH) and polyurethane-type (Ligno-PU) polymers, respectively. These polymers were used to prepare composites reinforced with sisal lignocellulosic fibers. The use of lignosulfonate in the formulation of both types of polymers was beneficial, because in general composites with improved properties, specially impact strength, were obtained. Composites were also prepared from the so called “biopolyethylene” (HDPE), curaua lignocellulosic fiber, and castor oil (CO). All composites HDBPE/CO/Fiber exhibited higher impact strength, when compared to those of the corresponding HDBPE/Fiber. These results, combined with others (eg SEM images of the fractured surfaces) indicated that, in addition to acting as a plasticizer, this oil may have acted as a compatibilizer of the hydrophilic fiber with the hydrophobic polymer. The set of results indicated that (i) mats with nano (diameter ≤ 100nm) and/or ultrafine (submicron scale) fibers were produced, (ii) hybrid fibers were produced (bio-based mats composites), (iii) cellulosic pulp (CP) and/or lignin (Lig) can be combined with PET matrices to control properties such as stiffness and hydrophilicity of the respective mats. Materials with diversified properties were prepared from high content of renewable raw materials, thus fulfilling the proposed targets.

Polymeric materials from renewable resources

Science.gov (United States)

Frollini, Elisabete; Rodrigues, Bruno V. M.; da Silva, Cristina G.; Castro, Daniele O.; Ramires, Elaine C.; de Oliveira, Fernando; Santos, Rachel P. O.

2016-05-01

The goals of our studies have been the use of renewable raw materials in the preparation of polymeric materials with diversified properties. In this context, lignosulfonate, which is produced in large scale around the world, but not widely used in the production of polymeric materials, was used to replace phenol and polyols in the preparation of phenolic- (Ligno-PH) and polyurethane-type (Ligno-PU) polymers, respectively. These polymers were used to prepare composites reinforced with sisal lignocellulosic fibers. The use of lignosulfonate in the formulation of both types of polymers was beneficial, because in general composites with improved properties, specially impact strength, were obtained. Composites were also prepared from the so called "biopolyethylene" (HDPE), curaua lignocellulosic fiber, and castor oil (CO). All composites HDBPE/CO/Fiber exhibited higher impact strength, when compared to those of the corresponding HDBPE/Fiber. These results, combined with others (eg SEM images of the fractured surfaces) indicated that, in addition to acting as a plasticizer, this oil may have acted as a compatibilizer of the hydrophilic fiber with the hydrophobic polymer. The set of results indicated that (i) mats with nano (diameter ≤ 100nm) and/or ultrafine (submicron scale) fibers were produced, (ii) hybrid fibers were produced (bio-based mats composites), (iii) cellulosic pulp (CP) and/or lignin (Lig) can be combined with PET matrices to control properties such as stiffness and hydrophilicity of the respective mats. Materials with diversified properties were prepared from high content of renewable raw materials, thus fulfilling the proposed targets.

Biodegradable packaging materials conception based on starch and polylactic acid (PLA) reinforced with cellulose.

Science.gov (United States)

Masmoudi, Fatma; Bessadok, Atef; Dammak, Mohamed; Jaziri, Mohamed; Ammar, Emna

2016-10-01

The plastic materials used for packaging are increasing leading to a considerable amount of undegradable solid wastes. This work deals with the reduction of conventional plastics waste and the natural resources preservation by using cellulosic polymers from renewable resources (alfa and luffa). Plasticized starch films syntheses were achieved at a laboratory scale. These natural films showed some very attractive mechanical properties at relatively low plasticizers levels (12 to 17 % by weight). Furthermore, mixtures including polylactic acid polymer (PLA) and cellulose fibers extracted from alfa and luffa were investigated by melt extrusion technique. When used at a rate of 10 %, these fibers improved the mixture mechanical properties. Both developed materials were biodegradable, but the plasticized starch exhibited a faster biodegradation kinetic compared to the PLA/cellulose fibers. These new materials would contribute to a sustainable development and a waste reduction.

Considerations for Contractile Electroactive Materials and Actuators

Energy Technology Data Exchange (ETDEWEB)

Rasmussen, Lenore; Erickson, Carl J.; Meixler, Lewis D.; Ascione, George; Gentile, Charles A.; Tilson, Carl; Bernasek, Stephen L.; Abelev, Esta

2010-02-19

Ras Labs produces electroactive polymer (EAP) based materials and actuators that bend, swell, ripple and now contract (new development) with low electric input. This is an important attribute because of the ability of contraction to produce life-like motion. The mechanism of contraction is not well understood. Radionuclide-labeled experiments were conducted to follow the movement of electrolytes and water in these EAPs when activated. Extreme temperature experiments were performed on the contractile EAPs with very favorable results. One of the biggest challenges in developing these actuators, however, is the electrode-EAP interface because of the pronounced movement of the EAP. Plasma treatments of metallic electrodes were investigated in order to improve the attachment of the embedded electrodes to the EAP material. Surface analysis, adhesive testing, and mechanical testing were conducted to test metal surfaces and metal-polymer interfaces. The nitrogen plasma treatment of titanium produced a strong metal-polymer interface; however, oxygen plasma treatment of both stainless steel and titanium produced even stronger metal-polymer interfaces. Plasma treatment of the electrodes allows for the embedded electrodes and the EAP material of the actuator to work and move as a unit, with no detachment, by significantly improving the metal-polymer interface.

Considerations for Electroactive Polymeric Materials and Actuators

International Nuclear Information System (INIS)

Rasmussen, Lenore; Erickson, Carl J.; Meixler, Lewis D.; Ascione, George; Gentile, Charles A.; Tilson, Carl; Bernasek, Stephen L.; Abelev, Esta

2010-01-01

Ras Labs produces electroactive polymer (EAP) based materials and actuators that bend, swell, ripple and now contract (new development) with low electric input. This is an important attribute because of the ability of contraction to produce life-like motion. The mechanism of contraction is not well understood. Radionuclide-labeled experiments were conducted to follow the movement of electrolytes and water in these EAPs when activated. Extreme temperature experiments were performed on the contractile EAPs with very favorable results. One of the biggest challenges in developing these actuators, however, is the electrode-EAP interface because of the pronounced movement of the EAP. Plasma treatments of metallic electrodes were investigated in order to improve the attachment of the embedded electrodes to the EAP material. Surface analysis, adhesive testing, and mechanical testing were conducted to test metal surfaces and metal-polymer interfaces. The nitrogen plasma treatment of titanium produced a strong metal-polymer interface; however, oxygen plasma treatment of both stainless steel and titanium produced even stronger metal-polymer interfaces. Plasma treatment of the electrodes allows for the embedded electrodes and the EAP material of the actuator to work and move as a unit, with no detachment, by significantly improving the metal-polymer interface.

Resource efficiency of urban sanitation systems. A comparative assessment using material and energy flow analysis

Energy Technology Data Exchange (ETDEWEB)

Meinzinger, Franziska

2010-07-01

Within the framework of sustainable development it is important to find ways of reducing natural resource consumption and to change towards closed-loop management. As in many other spheres increased resource efficiency has also become an important issue in sanitation. Particularly nutrient recovery for agriculture, increased energy-efficiency and saving of natural water resources, can make a contribution to more resource efficient sanitation systems. To assess the resource efficiency of alternative developments a systems perspective is required. The present study applies a combined cost, energy and material flow analysis (ceMFA) as a system analysis method to assess the resource efficiency of urban sanitation systems. This includes the discussion of relevant criteria and assessment methods. The main focus of this thesis is the comparative assessment of different systems, based on two case studies; Hamburg in Germany and Arba Minch in Ethiopia. A range of possible system developments including source separation (e.g. diversion of urine or blackwater) is defined and compared with the current situation as a reference system. The assessment is carried out using computer simulations based on model equations. The model equations not only integrate mass and nutrient flows, but also the energy and cost balances of the different systems. In order to assess the impact of different assumptions and calculation parameters, sensitivity analyses and parameter variations complete the calculations. Based on the simulations, following general conclusions can be drawn: None of the systems show an overall benefit with regard to all investigated criteria, namely nutrients, energy, water and costs. Yet, the results of the system analysis can be used as basis for decision making if a case-related weighting is introduced. The systems show varying potential for the recovery of nutrients from (source separated) wastewater flows. For the case study of Hamburg up to 29% of the mineral

Considerations when ranking stochastically modeled oil sands resource models for mining applications

Energy Technology Data Exchange (ETDEWEB)

Etris, E.L. [Society of Petroleum Engineers, Canadian Section, Calgary, AB (Canada)]|[Petro-Canada, Calgary, AB (Canada); Idris, Y.; Hunter, A.C. [Petro-Canada, Calgary, AB (Canada)

2008-10-15

Alberta's Athabasca oil sands deposit has been targeted as a major resource for development. Bitumen recovery operations fall into 2 categories, namely mining and in situ operations. Mining recovery is done above ground level and consists of open pit digging, disaggregation of the bitumen-saturated sediment through crushing followed by pipeline transport in a water-based slurry and then separation of oil, water and sediment. In situ recovery consists of drilling wells and stimulating the oil sands in the subsurface with a thermal treatment to reduce the viscosity of the bitumen and allow it to come to the surface. Steam assisted gravity drainage (SAGD) is the most popular thermal treatment currently in use. Resource models that simulate the recovery process are needed for both mining and in situ recovery operations. Both types can benefit from the advantages of a stochastic modeling process for resource model building and uncertainty evaluation. Stochastic modeling provides a realistic geology and allows for multiple realizations, which mining operations can use to evaluate the variability of recoverable bitumen volumes and develop mine plans accordingly. This paper described the processes of stochastic modelling and of determining the appropriate single realization for mine planning as applied to the Fort Hills oil sands mine which is currently in the early planning stage. The modeling exercise was used to estimate the in-place resource and quantify the uncertainty in resource volumes. The stochastic models were checked against those generated from conventional methods to identify any differences and to make the appropriate adaptations. 13 refs., 3 tabs., 16 figs.

DOE handbook: Design considerations

International Nuclear Information System (INIS)

1999-04-01

The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline

DOE handbook: Design considerations

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-04-01

The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. The handbook is presented in two parts. Part 1, which addresses design considerations, includes two sections. The first addresses the design of systems typically used in nuclear facilities to control radiation or radioactive materials. Specifically, this part addresses the design of confinement systems and radiation protection and effluent monitoring systems. The second section of Part 1 addresses the design of special facilities (i.e., specific types of nonreactor nuclear facilities). The specific design considerations provided in this section were developed from review of DOE 6430.1A and are supplemented with specific suggestions and considerations from designers with experience designing and operating such facilities. Part 2 of the Design Considerations Handbook describes good practices and design principles that should be considered in specific design disciplines, such as mechanical systems and electrical systems. These good practices are based on specific experiences in the design of nuclear facilities by design engineers with related experience. This part of the Design Considerations Handbook contains five sections, each of which applies to a particular engineering discipline.

Cultural Resource Investigations for a Multipurpose Haul Road on the Idaho National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Brenda R. Pace; Cameron Brizzee; Hollie Gilbert; Clayton Marler; Julie Braun Williams

2010-08-01

The U. S. Department of Energy, Idaho Operations Office is considering options for construction of a multipurpose haul road to transport materials and wastes between the Materials and Fuels Complex (MFC) and other Idaho National Laboratory (INL) Site facilities. The proposed road will be closed to the public and designed for limited year-round use. Two primary options are under consideration: a new route south of the existing T-25 power line road and an upgrade to road T-24. In the Spring of 2010, archaeological field surveys and initial coordination and field reconnaissance with representatives from the Shoshone-Bannock Tribes were completed to identify any resources that may be adversely affected by the proposed road construction and to develop recommendations to protect any listed or eligible for listing on the National Register of Historic Places. The investigations showed that 24 archaeological resources and one historic marker are located in the area of potential effects for road construction and operation south of the T-25 powerline road and 27archaeological resources are located in the area of potential effects for road construction and operation along road T-24. Generalized tribal concerns regarding protection of natural resources were also documented in both road corridors. This report outlines recommendations for additional investigations and protective measures that can be implemented to minimize adverse impacts to the identified resources.

Proliferation Resistance and Material Type considerations within the Collaborative Project for a European Sodium Fast Reactor

International Nuclear Information System (INIS)

Renda, Guido; Alim, Fatih; Cojazzi, Giacomo GM.

2015-01-01

The collaborative project for a European Sodium Fast Reactor (CP‑ESFR) is an international project where 25 European partners developed Research & Development solutions and concepts for a European sodium fast reactor. The project was funded by the 7. European Union Framework Programme and covered topics such as the reactor architectures and components, the fuel, the fuel element and the fuel cycle, and the safety concepts. Within sub‑project 3, dedicated to safety, a task addressed proliferation resistance considerations. The Generation IV International Forum (GIF) Proliferation Resistance and Physical Protection (PR and PP) Evaluation Methodology has been selected as the general framework for this work, complemented by punctual aspects of the IAEA‑INPRO Proliferation Resistance methodology and other literature studies - in particular for material type characterization. The activity has been carried out taking the GIF PR and PP Evaluation Methodology and its Addendum as the general guideline for identifying potential nuclear material diversion targets. The targets proliferation attractiveness has been analyzed in terms of the suitability of the targets’ nuclear material as the basis for its use in nuclear explosives. To this aim the PR and PP Fissile Material Type measure was supplemented by other literature studies, whose related metrics have been applied to the nuclear material items present in the considered core alternatives. This paper will firstly summarize the main ESFR design aspects relevant for PR following the structure of the GIF PR and PP White Paper template. An analysis on proliferation targets is then discussed, with emphasis on their characterization from a nuclear material point of view. Finally, a high‑level ESFR PR analysis according to the four main proliferation strategies identified by the GIF PR and PP Evaluation Methodology (concealed diversion, concealed misuse, breakout, clandestine production in clandestine facilities) is

Medical diagnosis in resource-poor tropical countries.

Science.gov (United States)

Ramos-Rincón, J M; Cuadros-González, J; Malmierca-Corral, E; de Górgolas-Hernández, M

2015-01-01

When working in healthcare centers in developing countries where diagnostic resources are limited, clinical skills are of considerable importance. This study presents the diagnostic tools available in resource-poor areas. Anamnesis and physical examination are key components for reaching a correct diagnosis. The laboratory has at its disposal hemograms, basic blood chemistry and urinalysis. The available basic microbiological tests are the study of fresh feces, smears for malaria, direct smears for bacilli in sputum and Gram staining of clinical exudates. Basic radiography of the chest, abdomen, bones and soft tissues are of considerable usefulness but are not available in all centers. Ultrasonography can be of considerable usefulness due to its simplicity and versatility. The diagnosis in low resource conditions should sharpen our clinical skills and should be supported by the use of additional basic tests. Copyright © 2014 Elsevier España, S.L.U. All rights reserved.

Consideration on the current status and issues of sensitive information management concerning the physical protection of nuclear material and nuclear facilities

International Nuclear Information System (INIS)

Inamura, Tomoaki; Madarame, Haruki

2009-01-01

The confidentiality system concerning the physical protection of nuclear materials and nuclear facilities was enacted by revision of the Nuclear Reactor Regulation Law in 2005. We made a comparative analysis with the information security in governmental agencies or financial sectors, in order to consider the way the sensitive information management concerning the physical protection of nuclear materials and nuclear facilities should be. The considerations in this paper are as follows. (1) In order to secure a suitable level of security, close cooperation should be achieved among related governmental agencies. (2) A cycle that continuously evaluates whether suitable management is performed should be established. (3) Excessive secretiveness should be eliminated. (4) An information-sharing system among the related persons beyond the frame of governmental agencies and electricity companies should be established. (5) Improvement in the social acceptability of the sensitive information management is important. (6) Although it is important to perform evaluation by the consideration of suitable balance with information disclosure, it is also important that it is positively shown to society. (author)

Considerations on valorization of biomass origin materials in co-combustion with coal in fluidized beds

Energy Technology Data Exchange (ETDEWEB)

I. Gulyurtlu; P. Abelha; H. Lopes; A. Crujeira; I. Cabrita [DEECA-INETI, Lisbon (Portugal)

2007-07-01

Co-combustion of biomass materials with coal is currently gaining increasing importance, in order to meet the targets on greenhouse gas emissions, defined in the Kyoto protocol. Co-firing of coal with biomass materials could be the short-term solution in reducing CO{sub 2} emissions from power stations. The work undertaken studied co-firing of meat and bone meal (MBM), olive cake and straw pellets with bituminous coals from Colombia (CC) and Poland (PC), which are commonly used in European power stations. The co-combustion studies were carried out on the pilot fluidized bed installation of INETI. Gaseous pollutants and solid concentration in flue gases and ashes from different locations were monitored. Results obtained indicate that the co-feeding of biomass materials did not present any problem and ensured stable combustion conditions and high efficiency. However, for temperatures above 800{sup o}C, bed agglomeration could be observed for all biomass species studied. Most of the combustion of biomass material, contrary to that of coal, was observed to take place in the riser where the temperature was as high as 150-250{sup o}C above that of the bed. SO{sub 2} and NOx levels were found to be lower. The emissions of dioxins could be considerable with fuels with high Cl as is the case with straw. However, mixing of fuels with high S content could lead to a strong reduction in dioxin emissions. Ashes produced from biomass combustion may be considered for further reutilization or landfilling. Other options depend on their characteristics, chemical composition and leaching behaviour. This was evaluated in this study.

Forest Resources

Energy Technology Data Exchange (ETDEWEB)

None

2016-06-01

Forest biomass is an abundant biomass feedstock that complements the conventional forest use of wood for paper and wood materials. It may be utilized for bioenergy production, such as heat and electricity, as well as for biofuels and a variety of bioproducts, such as industrial chemicals, textiles, and other renewable materials. The resources within the 2016 Billion-Ton Report include primary forest resources, which are taken directly from timberland-only forests, removed from the land, and taken to the roadside.

World resources: engineering solutions

Energy Technology Data Exchange (ETDEWEB)

1976-01-01

The proceedings include 10 papers that contribute to population environment; fossil fuel resources and energy conservation; nuclear and solar power; production of ores and manufacture and use of metallic resources; resources of manufactured and natural nonmetallic materials; water as a reusable resource; and timber as a replaceable resource.

Material flow cost accounting as a tool for improved resource efficiency in the hotel sector: A case of emerging market

Directory of Open Access Journals (Sweden)

Celani John Nyide

2016-12-01

Full Text Available Material Flow Cost Accounting (MFCA is one of the Environmental Management Accounting (EMA tools that has been developed to enable environmentally and economically efficient material usage and thus improve resource efficiency. However, the use of this tool to improve resource efficiency in the South African hotel sector remains unknown. An exploratory study, qualitative in nature, was conducted using a single case study with embedded units approach. A Hotel Management Group that met the selection criteria formed part of this study. In-depth interviews were conducted with 10 participants and additional documents were analysed. The investigated hotels have developed technologies that provide an environmental account in both physical and monetary units which constitute the use of MFCA to improve resource efficiencies. However, the study established a number of factors that affect the implementation of MFCA by the hotel sector in a South African context

A theory of economic growth with material/energy resources and dematerialization. Interaction of three growth mechanisms

Energy Technology Data Exchange (ETDEWEB)

Ayres, Robert U. [Department of Physical Resource Theory, Chalmers Institute, Gothenburg (Sweden); Van den Bergh, Jeroen C.J.M. [Department of Spatial Economics, Faculty of Economics and Business Administration, and Institute for Environmental Studies, Free University, De Boelelaan 1105, Amsterdam 1081 HV (Netherlands)

2005-10-05

The nature of energy and material resources in a non-optimizing growth theory framework is clarified. This involves two modifications of the conventional theory. Firstly, multiple feedback mechanisms or 'growth engines' are identified, such that the impact of the cost of production through demand on growth is accounted for. Secondly, a production function distinguishes between resource use, technical efficiency, and value creation. The resulting model is analytically solved under the condition of a constant growth rate. Given model complexity, numerical experiments are performed as well, providing relevant insights to the academic and political debates on 'environmental Kuznets curves' and 'dematerialization.'.

Rethinking the Holidays. Teacher's Resources.

Science.gov (United States)

Porter, Priscilla H.

1993-01-01

Maintains that holidays provide opportunities for teaching about history and cultural diversity. Presents a bibliographic essay of recommended resources for elementary teachers on this topic. Materials include reading resources, activity books, and audiovisual materials. (CFR)

Availability and Quantity of Human and Material Resources of Nigerian Universities' HIV Youth Friendly Centres: Implication for Policy Implementation

Directory of Open Access Journals (Sweden)

A.G. Akintomide

2017-12-01

Full Text Available The study assessed the availability and quality of human and material resources at the Campus-based Youth Friendly Centres in Southwestern Nigeria. The survey research design was adopted and the study was carried out among ten counsellors and centre coordinators of Youth Friendly Centres in four higher institutions of learning in Southwest Nigeria using interview guide and observation checklist to collect data. The result revealed that there were no enough counsellors at the YFCs and some of the counsellors available at the centres did not have enough qualification to render HIV counselling. It was also revealed that material resources were moderately available at most of the centres but not up to the require standard stipulated by the World Health Organization.

Landfill mining: Resource potential of Austrian landfills--Evaluation and quality assessment of recovered municipal solid waste by chemical analyses.

Science.gov (United States)

Wolfsberger, Tanja; Aldrian, Alexia; Sarc, Renato; Hermann, Robert; Höllen, Daniel; Budischowsky, Andreas; Zöscher, Andreas; Ragoßnig, Arne; Pomberger, Roland

2015-11-01

Since the need for raw materials in countries undergoing industrialisation (like China) is rising, the availability of metal and fossil fuel energy resources (like ores or coal) has changed in recent years. Landfill sites can contain considerable amounts of recyclables and energy-recoverable materials, therefore, landfill mining is an option for exploiting dumped secondary raw materials, saving primary sources. For the purposes of this article, two sanitary landfill sites have been chosen for obtaining actual data to determine the resource potential of Austrian landfills. To evaluate how pretreating waste before disposal affects the resource potential of landfills, the first landfill site has been selected because it has received untreated waste, whereas mechanically-biologically treated waste was dumped in the second. The scope of this investigation comprised: (1) waste characterisation by sorting analyses of recovered waste; and (2) chemical analyses of specific waste fractions for quality assessment regarding potential energy recovery by using it as solid recovered fuels. The content of eight heavy metals and the net calorific values were determined for the chemical characterisation tests. © The Author(s) 2015.

Considerations for sampling nuclear materials for SNM accounting measurements. Special nuclear material accountability report

International Nuclear Information System (INIS)

Brouns, R.J.; Roberts, F.P.; Upson, U.L.

1978-05-01

This report presents principles and guidelines for sampling nuclear materials to measure chemical and isotopic content of the material. Development of sampling plans and procedures that maintain the random and systematic errors of sampling within acceptable limits for SNM(Special Nuclear Materials) accounting purposes are emphasized

12 CFR 263.62 - Relevant considerations for assessment of civil penalty.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 3 2010-01-01 2010-01-01 false Relevant considerations for assessment of civil... Collection of Civil Money Penalties § 263.62 Relevant considerations for assessment of civil penalty. In... the penalty with respect to the financial resources and good faith of the person charged, the gravity...

Climate Change and Sustainability Open Educational Resources: Lessons learned and challenges to tackle

Science.gov (United States)

Robinson, Zoe; Whitfield, Stephen; Gertisser, Ralf; Krause, Stefan; McKay, Deirdre; Pringle, Jamie; Szkornik, Katie; Waller, Richard

2010-05-01

The UK's Higher Education Academy Subject Centre for Geography, Earth and Environmental Sciences (GEES) is currently running a project entitled ‘C-Change in GEES: Open licensing of climate change and sustainability resources in the Geography, Earth and Environmental Sciences' as part of a national Open Educational Resource project. The C-Change project aims to explore the challenges involved in ‘repurposing' existing teaching materials on the topics of climate change and sustainability to make them open access. This project has produced an open access resource of diverse climate change and sustainability-related teaching materials across the subjects of Geography, Earth and Environmental Sciences. The process of repurposing existing face-to-face teaching resources requires consideration of a wide variety of issues including the Intellectual Property Rights (IPR) associated with images and other material included in the teaching resources, in addition to issues of quality, accessibility and usability of resources. Open access education is an issue that will have implications across the whole of the organizational structure of a university, from legal advisors with commitments to University research and enterprise activities, to the academics wishing to produce open access resources, through to all levels of senior management. The attitudes, concerns and openness to Open Educational Resources of stakeholders from all positions within a HE institution will have implications for the participation of that institution within the OER movement. The many barriers to the whole-scale adoption of Open Educational Resources within the UK Higher Education system and the willingness of UK Higher Education Institutions to engage in the OER movement include institutional perspectives on the IPR of teaching materials developed by members of staff within the institution and financial viability, in addition to more sceptical attitudes of potential contributors. Keele University is

ESTIMATION OF THE MODERN STATE OF PROVISION OF AGRICULTURAL ENTERPRISES IN MYKOLAIV REGION BY MATERIAL AND TECHNICAL RESOURCES

Directory of Open Access Journals (Sweden)

Natalya Potryvaieva

2017-09-01

Full Text Available The research considers the issue of the provision of agrarian enterprises in Ukraine by material and technical resources and effective use of them. The scientific novelty of the results obtained is in the research of theoretical positions, substantiation of applied approaches concerning the organization of material and technical provision of enterprises of the agrarian sector, in particular, Mykolaiv region, taking into account the proposals of the second market of agricultural machinery, units, and aggregates. Methodology. The purpose of the article is the research and estimation of the current state of the provision of agrarian enterprises by material and technical resources. The object of scientific research is the process of provision of material and technical resources for enterprises of the agrarian sector in Mykolaiv region. The level of material and technical resources at agricultural enterprises in Mykolaiv region is analysed. Relative improvement of the situation with technical equipment and energy supply of agriculture in the Mykolaiv region since 2014 is defined; however, the dynamics are not active sufficiently and do not exceed five percent. The ratio between the amount of machinery purchased and disposed of by depreciation is disproportionate, the equipment provided by the unit of area, and the load on the machines available in the farms do not meet the requirements. The dynamics of capital and direct foreign investments in agriculture of Mykolaiv region, which during the research period increased, is investigated. It is proved that despite the rather successful development of capital investments by large-scale agricultural producers in the region, financial investments in modernization, repair, and acquisition of the new technology by small business entities are not sufficiently active. The authors substantiate that the tasks of technical re-equipment for commodity producers of the Mykolaiv region remain one of the most important

Components of sustainability considerations in management of petrochemical industries.

Science.gov (United States)

Aryanasl, Amir; Ghodousi, Jamal; Arjmandi, Reza; Mansouri, Nabiollah

2017-06-01

Sustainability comprises three pillars of social, environmental, and economic aspects. Petrochemical industry has a great inter-related complex impact on social and economic development of societies and adverse impact on almost all environmental aspects and resource depletion in many countries, which make sustainability a crucial issue for petrochemical industries. This study was conducted to propose components of sustainability considerations in management of petrochemical industries.A combination of exploratory study-to prepare a preliminary list of components of sustainable business in petrochemical industries based on review of literature and Delphi-to obtain experts' view on this preliminary list and provide a detailed list of components and sub-components that should be addressed to bring sustainability to petrochemical industries, were used.Two sets of components were provided. First general components, which include stakeholders (staffs, society, and environment) with four sub-components, financial resources with 11 sub-components, improvement of design and processes with nine sub-components, policy and strategy of cleaner production with seven sub-components and leadership with seven sub-components. The second operational components included raw material supply and preparation with five, synthesis with ten, product separation and refinement with nine, product handling and storage with five, emission abatement with eight, and improvement of technology and equipment with 16 sub-components.

Special Features of Using Secondary Materials in the Interior Design of Public Dining Establishments

Science.gov (United States)

Kuznetsova, Irina; Hapchuk, Olena; Lukinov, Vitaly

2017-10-01

This article analyses the latest publications studying the use and practical application of secondary resources as raw materials in design. This analysis is based on the list of secondary resources and their applications in interior decoration. In particular, the interiors of public catering enterprises were analysed. Restaurants with different functional purposes that were classified into several categories with specific peculiarities of interior design were identified. This article presents and describes different types of public catering enterprises based on those categories. The interior design of a public catering enterprise is regarded as a considerably complex system. Different types of secondary materials were reviewed to identify the most frequently used materials for interior space design. This article describes the main peculiarities of the use of secondary materials and presents examples of their practical application. The function of secondary materials in the interior design of public catering enterprises were detected and reviewed. On the basis of the analysis, several directions for the practical application of our results in the field of public catering enterprise design were suggested.

Geothermal energy. A national proposal for geothermal resources research

Energy Technology Data Exchange (ETDEWEB)

Denton, J.C. (ed.)

1972-01-01

Discussions are given for each of the following topics: (1) importance to the Nation of geothermal resources, (2) budget recommendations, (3) overview of geothermal resources, (4) resource exploration, (5) resource assessment, (6) resource development and production, (7) utilization technology and economics, (8) environmental effects, (9) institutional considerations, and (10) summary of research needs.

Storage array reflection considerations

International Nuclear Information System (INIS)

Haire, M.J.; Jordan, W.C.; Taylor, R.G.

1997-01-01

The assumptions used for reflection conditions of single containers are fairly well established and consistently applied throughout the industry in nuclear criticality safety evaluations. Containers are usually considered to be either fully water reflected (i.e., surrounded by 6 to 12 in. of water) for safety calculations or reflected by 1 in. of water for nominal (structural material and air) conditions. Tables and figures are usually available for performing comparative evaluations of containers under various loading conditions. Reflection considerations used for evaluating the safety of storage arrays of fissile material are not as well established. When evaluating arrays, it has become more common for analysts to use calculations to demonstrate the safety of the array configuration. In performing these calculations, the analyst has considerable freedom concerning the assumptions made for modeling the reflection of the array. Considerations are given for the physical layout of the array with little or no discussion (or demonstration) of what conditions are bounded by the assumed reflection conditions. For example, an array may be generically evaluated by placing it in a corner of a room in which the opposing walls are far away. Typically, it is believed that complete flooding of the room is incredible, so the array is evaluated for various levels of water mist interspersed among array containers. This paper discusses some assumptions that are made regarding storage array reflection

SYSTEMATIC LITERATURE REVIEW ON RESOURCE ALLOCATION AND RESOURCE SCHEDULING IN CLOUD COMPUTING

OpenAIRE

B. Muni Lavanya; C. Shoba Bindu

2016-01-01

The objective the work is intended to highlight the key features and afford finest future directions in the research community of Resource Allocation, Resource Scheduling and Resource management from 2009 to 2016. Exemplifying how research on Resource Allocation, Resource Scheduling and Resource management has progressively increased in the past decade by inspecting articles, papers from scientific and standard publications. Survey materialized in three-fold process. Firstly, investigate on t...

Episodic encoding in normal aging: attentional resources hypothesis extended to musical material.

Science.gov (United States)

Blanchet, Sophie; Belleville, Sylvie; Peretz, Isabelle

2006-01-01

The goal of the present study was to examine age-related changes in musical episodic memory for novel tunes. This was conducted by manipulating the encoding condition in a recognition paradigm. After receiving memory instructions (intentional condition), older and younger participants obtained equivalent hits. In contrast, when intentional encoding was accompanied by a dancing judgment (dancing + intentional condition), the recognition performance of the older persons was severely impaired. Impaired recognition was also found when participants only judged the excerpts without being instructed to memorize them (dancing judgment condition). Although older participants demonstrated a preserved ability to perform the dancing judgment on its own, this ability was not optimal and likely precluded the initiation of more elaborate encoding strategies. These results suggest that asking older persons to divide their attention in the study phase reduces the quality of their musical encoding. Given this extension to musical material, we discuss the notion that the age-related attentional resource decline appears to be domain-general rather than specific to verbal material.

Key skills by design: adapting a central Web resource to departmental contexts

Directory of Open Access Journals (Sweden)

Claire McAvinia

2002-12-01

Full Text Available Web-based delivery of support materials for students has proved to be a popular way of helping small teams to implement key skills policies within universities. The development of 'key' or 'transferable' skills is now encouraged throughout education, but resources (both in terms of staffing and budget tend to be limited. It is difficult for key skills teams to see learners face to face, and not feasible to print or distribute large amounts of paper-based material. Web-based delivery presents a means of overcoming these problems but it can result in generic study skills material simply being published online without due consideration of the needs of different groups of learners within different subject disciplines. Therefore, although a centralized Website for skills provision can overcome logistical problems, it may be perceived as irrelevant or unusable by the student population. This paper presents a model for Web-based delivery of support for key skills which incorporates two separate approaches to the design of these resources. The model was implemented as part of a wider key skills pilot project at University College London, over a period of one year. It includes a 'core' Website, containing information and resources for staff and students. These can also be accessed via customized, departmental key skills homepages. This paper presents the basis for the design choices made in preparing these materials, and the evaluation of some of the pilot departments using them. It then draws some wider conclusions about the effectiveness of this design for supporting skills development.

Writing about Clients: Ethical Considerations and Options

Science.gov (United States)

Sperry, Len; Pies, Ronald

2010-01-01

Today, the decision to prepare clinical case material for publication is a decision that cannot be taken lightly. The decision involves reviewing ethical considerations and choosing among various options to safeguard client privacy. Such options include seeking the client's permission, disguising case material, and developing composite case…

Storage array reflection considerations

International Nuclear Information System (INIS)

Haire, M.J.; Jordan, W.C.; Taylor, R.G.

1997-01-01

The assumptions used for reflection conditions of single containers are fairly well established and consistently applied throughout the industry in nuclear criticality safety evaluations. Containers are usually considered to be either fully water-reflected (i.e. surrounded by 6 to 12 in. of water) for safety calculations or reflected by 1 in. of water for nominal (structural material and air) conditions. Tables and figures are usually available for performing comparative evaluations of containers under various loading conditions. Reflection considerations used for evaluating the safety of storage arrays of fissile material are not as well established

Initial integration of accident safety, waste management, recycling, effluent, and maintenance considerations for low-activation materials

International Nuclear Information System (INIS)

Piet, S.J.; Herring, J.S.; Cheng, E.T.; Fetter, S.

1991-01-01

A true low-activation material should ideally achieve all of the following objectives: 1. The possible prompt dose at the site boundary from 100% release of the inventory should be <2 Sv (200 rem); hence, the design would be inherently safe in that no possible accident could result in prompt radiation fatalities. 2. The possible cancers from realistic releases should be limited such that the accident risk is <0.1%/yr of the existing background cancer risk to local residents. This includes consideration of elemental volatility. 3. The decay heat should be limited so that active mitigative measures are not needed to protect the investment from cooling transients; hence, the design would be passively safe with respect to decay heat. 4. Used materials could be either recycled or disposed of as near- surface waste. 5. Hands-on maintenance should be possible around coolant system piping and components such as the heat exchanger. 6. Effluent of activation products should be minor compared to the major challenge of limiting tritium effluents. The most recent studies in these areas are used to determine which individual elements and engineering materials are low activation. Grades from A (best) to G (worst) are given to each element in the areas of accident safety, recycling, and waste management. Structure/fluid combinations are examined for low-activation effluents and out-of-blanket maintenance. The lowest activation structural materials are silicon carbide, vanadium alloys, and ferritic steels. Impurities and minor alloying constituents must be carefully considered. The lowest activation coolants are helium, water, FLiBe, and lithium. The lowest activation breeders are lithium, lithium oxide, lithium silicate, and FLiBe. Designs focusing on these truly low-activation materials will help achieve the excellent safety and environmental potential of fusion energy

Considerations for Contractile Electroactive Materials and Actuators

Energy Technology Data Exchange (ETDEWEB)

Lenore Rasmussen, David Schramm, Paul Rasmussen, Kevin Mullaly, Ras Labs, LLC, Intelligent Materials for Prosthetics & Automation, Lewis D. Meixler, Daniel Pearlman and Alice Kirk

2011-05-23

Ras Labs produces contractile electroactive polymer (EAP) based materials and actuators that bend, swell, ripple, and contract (new development) with low electric input. In addition, Ras Labs produces EAP materials that quickly contract and expand, repeatedly, by reversing the polarity of the electric input, which can be cycled. This phenomenon was explored using molecular modeling, followed by experimentation. Applied voltage step functions were also investigated. High voltage steps followed by low voltage steps produced a larger contraction followed by a smaller contraction. Actuator control by simply adjusting the electric input is extremely useful for biomimetic applications. Muscles are able to partially contract. If muscles could only completely contract, nobody could hold an egg, for example, without breaking it. A combination of high and low voltage step functions could produce gross motor function and fine manipulation within the same actuator unit. Plasma treated electrodes with various geometries were investigated as a means of providing for more durable actuation.

Aquarius study - engineering and economic considerations

International Nuclear Information System (INIS)

Griffin, Roger F.

1970-01-01

The two previous papers described the scope of the Aquarius Study and the various applications considered in evaluating the use of nuclear explosives for the development of water resources in Arizona. Surface storage behind a dam created with the use of nuclear explosives was selected for the major effort, primarily because it could afford the most valid direct comparison between nuclear and conventional methods. In this paper I will focus on the engineering and economic considerations involved in developing and evaluating three concepts for constructing a rockfill dam using nuclear explosives. Engineering development and economic evaluation of the concepts was the principal responsibility of Bechtel Corporation as a consultant in the study to the Arizona Atomic Energy Commission. We depended heavily on information supplied by the Federal participants, notably the U.S. Bureau of Reclamation for site data and the U.S. AEC*s Lawrence Radiation Laboratory for information on nuclear explosives effects. Since the study report has not yet been published and additional material is still forthcoming, some of the information I will present, such as the cost estimates, may be subject to change and should be considered preliminary. (author)

Aquarius study - engineering and economic considerations

Energy Technology Data Exchange (ETDEWEB)

Griffin, Roger F [Bechtel Corporation (United States)

1970-05-15

The two previous papers described the scope of the Aquarius Study and the various applications considered in evaluating the use of nuclear explosives for the development of water resources in Arizona. Surface storage behind a dam created with the use of nuclear explosives was selected for the major effort, primarily because it could afford the most valid direct comparison between nuclear and conventional methods. In this paper I will focus on the engineering and economic considerations involved in developing and evaluating three concepts for constructing a rockfill dam using nuclear explosives. Engineering development and economic evaluation of the concepts was the principal responsibility of Bechtel Corporation as a consultant in the study to the Arizona Atomic Energy Commission. We depended heavily on information supplied by the Federal participants, notably the U.S. Bureau of Reclamation for site data and the U.S. AEC*s Lawrence Radiation Laboratory for information on nuclear explosives effects. Since the study report has not yet been published and additional material is still forthcoming, some of the information I will present, such as the cost estimates, may be subject to change and should be considered preliminary. (author)

Cost-benefit considerations in regulatory decision-making

International Nuclear Information System (INIS)

Harvie, J.D.

1996-01-01

The Atomic Energy Control Board is investigating the feasibility of developing methods for factoring cost-benefit considerations into its regulatory decision-making. This initiative results, in part, from the federal government policy requiring cost-benefit considerations to be taken into account in regulatory processes, and from the recommendations of an Advisory Panel on Regulatory Review in 1993, submitted to the Minister of Natural Resources Canada. One of these recommendations stated: 'that mechanisms be developed to examine cost-benefit issues and work towards some consensus of opinion among stakeholders; a task force on the subject could be an appropriate starting point'. (author)

Uranium resources and supply - demand to 2030

International Nuclear Information System (INIS)

Vance, R.

2010-01-01

Recent fluctuations in the market price for uranium have resulted in more activity in this sector over the past few years than in the preceding 20 years. Amidst this background, uranium demand is increasing. Construction of nuclear reactors is proceeding in some countries, ambitious expansion plans have been announced in others and the development of nuclear power programs to meet electricity demand and minimize greenhouse emissions in a cost effective manner is under consideration in many others. This paper reviews projections of nuclear growth and uranium demand and assesses the challenges faced by the uranium mining sector in meeting rising demand. Since the mid-1960 s, an international expert committee (the 'Uranium Group') formed by the OECD Nuclear Energy Agency and the International Atomic Energy Agency has published biennially comprehensive updates on global uranium resources, production and demand (the 'Red Book'). The most recent in this series, based on 2007 data and published in June 2008, includes a supply/demand projection to 2030. However, much has changed since the data were collected for this projection and an assessment of these changes and their impact on uranium production is included in this presentation. It is concluded that world identified uranium resources (5.45 million t U recoverable at costs up to US$130/kg U, or US$50/lb U 3 O 8 ) are adequate to meet projected future high case nuclear power requirements. However, recent financial market turmoil and lower uranium prices, the opaque nature of the uranium market itself, increased regulatory requirements, a scarcity of the required specialized labour and the fluctuating costs of raw materials makes the process of turning uranium resources in the ground into yellowcake in the can increasingly more challenging, particularly for new entrants. Considerable investment and expertise will be required to bring about the substantial increase in mine production required to meet future demand

Interactions of woody biofuel feedstock production systems with water resources: considerations for sustainability

Science.gov (United States)

Carl C. Trettin; Devendra Amatya; Mark Coleman

2008-01-01

Water resources are important for the production of woody biofuel feedstocks. It is necessary to ensure that production systems do not adversely affect the quantity or quality of surface and ground water. The effects of woody biomass plantations on water resources are largely dependent on the prior land use and the management regime. Experience from both irrigated and...

The Necessity of Qualitative Materiality in Auditing

OpenAIRE

Erdoğan, Nurten

2006-01-01

Auditors have to make materiality judgments on every audit. Assessing materiality requires careful consideration of all relevant circumstances, both quantitative and qualitative considerations, as well as interaction of these considerations. This process is difficult because both quantitative and qualitative factors must evaluate.Audit standards on materiality do not provide sufficient formal guidance to quantify materiality. As a result, the auditors have been left to assess materiality base...

Considerations for sampling nuclear materials for SNM accounting measurements

International Nuclear Information System (INIS)

Brouns, R.J.; Roberts, F.P.; Upson, U.L.

1978-01-01

This report presents principles and guidelines for sampling nuclear materials to measure chemical and isotopic content of the material. Development of sampling plans and procedures that maintain the random and systematic errors of sampling within acceptable limits for SNM accounting purposes are emphasized

Uranium market and resources

International Nuclear Information System (INIS)

Capus, G.; Arnold, T.

2005-01-01

Under the combined effect of various factors, such as interrogations related to facing the climatic changes, the increasing prices of oil versus announced decrease of its resources, the major geopolitical evolution and the remarkable development of Asia, we live nowadays a revival of nuclear power in the very front of stage. In tis context, the following question is posed: could the nuclear fission be a sustainable source of energy when taking into consideration the availability of uranium resources? The article aims at pinpointing the knowledge we have about the world uranium resources, their limits of uncertainty and the relation between knowledge resources and market evolution. To conclude, some susceptible tracks are proposed to improve the using process of uranium resources particularly in softening the impact of high prices

Merge of terminological resources

DEFF Research Database (Denmark)

Henriksen, Lina; Braasch, Anna

2012-01-01

In our globalized world, the amount of cross-national communication increases rapidly, which also calls for easy access to multi-lingual high quality terminological resources. Sharing of terminology resources is currently becoming common practice, and efficient strategies for integration...... – or merging – of terminology resources are strongly needed. This paper discusses prerequisites for successful merging with the focus on identification of candidate duplicates of a subject domain found in the resources to be merged, and it describes automatic merging strategies to be applied to such duplicates...... in electronic terminology resources. Further, some perspectives of manual, supplementary assessment methods supporting the automatic procedures are sketched. Our considerations are primarily based on experience gained in the IATE and EuroTermBank projects, as merging was a much discussed issue in both projects....

Space Resources Roundtable 2

Science.gov (United States)

Ignatiev, A.

2000-01-01

Contents include following: Developing Technologies for Space Resource Utilization - Concept for a Planetary Engineering Research Institute. Results of a Conceptual Systems Analysis of Systems for 200 m Deep Sampling of the Martian Subsurface. The Role of Near-Earth Asteroids in Long-Term Platinum Supply. Core Drilling for Extra-Terrestrial Mining. Recommendations by the "LSP and Manufacturing" Group to the NSF-NASA Workshop on Autonomous Construction and Manufacturing for Space Electrical Power Systems. Plasma Processing of Lunar and Planetary Materials. Percussive Force Magnitude in Permafrost. Summary of the Issues Regarding the Martian Subsurface Explorer. A Costing Strategy for Manufacturing in Orbit Using Extraterrestrial Resources. Mine Planning for Asteroid Orebodies. Organic-based Dissolution of Silicates: A New Approach to Element Extraction from LunarRegohth. Historic Frontier Processes Active in Future Space-based Mineral Extraction. The Near-Earth Space Surveillance (NIESS) Mission: Discovery, Tracking, and Characterization of Asteroids, Comets, and Artificial Satellites with a microsatellite. Privatized Space Resource Property Ownership. The Fabrication of Silicon Solar Cells on the Moon Using In-Situ Resources. A New Strategy for Exploration Technology Development: The Human Exploration and Development of Space (HEDS) Exploratiori/Commercialization Technology Initiative. Space Resources for Space Tourism. Recovery of Volatiles from the Moon and Associated Issues. Preliminary Analysis of a Small Robot for Martian Regolith Excavation. The Registration of Space-based Property. Continuous Processing with Mars Gases. Drilling and Logging in Space; An Oil-Well Perspective. LORPEX for Power Surges: Drilling, Rock Crushing. An End-To-End Near-Earth Asteroid Resource Exploitation Plan. An Engineering and Cost Model for Human Space Settlement Architectures: Focus on Space Hotels and Moon/Mars Exploration. The Development and Realization of a Silicon-60-based

Microwave sintering of ceramic materials

Science.gov (United States)

Karayannis, V. G.

2016-11-01

In the present study, the potential of microwave irradiation as an innovative energy- efficient alternative to conventional heating technologies in ceramic manufacturing is reviewed, addressing the advantages/disadvantages, while also commenting on future applications of possible commercial interest. Ceramic materials have been extensively studied and used due to several advantages they exhibit. Sintering ceramics using microwave radiation, a novel technology widely employed in various fields, can be an efficient, economic and environmentally-friendlier approach, to improve the consolidation efficiency and reduce the processing cycle-time, in order to attain substantial energy and cost savings. Microwave sintering provides efficient internal heating, as energy is supplied directly and penetrates the material. Since energy transfer occurs at a molecular level, heat is generated throughout the material, thus avoiding significant temperature gradients between the surface and the interior, which are frequently encountered at high heating rates upon conventional sintering. Thus, rapid, volumetric and uniform heating of various raw materials and secondary resources for ceramic production is possible, with limited grain coarsening, leading to accelerated densification, and uniform and fine-grained microstructures, with enhanced mechanical performance. This is particularly important for manufacturing large-size ceramic products of quality, and also for specialty ceramic materials such as bioceramics and electroceramics. Critical parameters for the process optimization, including the electromagnetic field distribution, microwave-material interaction, heat transfer mechanisms and material transformations, should be taken into consideration.

Fatigue load considerations and use of high efficiency materials in the nuclear refurbishment projects: a structural engineering perspective

Energy Technology Data Exchange (ETDEWEB)

Mohee, F. M., E-mail: fmm_p@yahoo.com [Univ. of Waterloo, ON (Canada)

2014-07-01

For the Darlington refurbishment project in Canada, fatigue load consideration is a very crucial component in the analysis and design of different structures in the nuclear facilities. New and innovative structural materials having much higher ultimate tensile strength and modulus of elasticity, that are free from corrosion, should be considered along with fatigue load during the analysis and design of the nuclear refurbishment projects. The structural analysis should include beam, column and slabs, vibrating, rotating and crane supporting structures, robotic structures, pipe supports, Serapid chain and associated automated gate structures, flask supporting structures, processing unit and lidding unit support structures. (author)

Clinical bacteriology in low-resource settings: today's solutions.

Science.gov (United States)

Ombelet, Sien; Ronat, Jean-Baptiste; Walsh, Timothy; Yansouni, Cedric P; Cox, Janneke; Vlieghe, Erika; Martiny, Delphine; Semret, Makeda; Vandenberg, Olivier; Jacobs, Jan

2018-03-05

Low-resource settings are disproportionately burdened by infectious diseases and antimicrobial resistance. Good quality clinical bacteriology through a well functioning reference laboratory network is necessary for effective resistance control, but low-resource settings face infrastructural, technical, and behavioural challenges in the implementation of clinical bacteriology. In this Personal View, we explore what constitutes successful implementation of clinical bacteriology in low-resource settings and describe a framework for implementation that is suitable for general referral hospitals in low-income and middle-income countries with a moderate infrastructure. Most microbiological techniques and equipment are not developed for the specific needs of such settings. Pending the arrival of a new generation diagnostics for these settings, we suggest focus on improving, adapting, and implementing conventional, culture-based techniques. Priorities in low-resource settings include harmonised, quality assured, and tropicalised equipment, consumables, and techniques, and rationalised bacterial identification and testing for antimicrobial resistance. Diagnostics should be integrated into clinical care and patient management; clinically relevant specimens must be appropriately selected and prioritised. Open-access training materials and information management tools should be developed. Also important is the need for onsite validation and field adoption of diagnostics in low-resource settings, with considerable shortening of the time between development and implementation of diagnostics. We argue that the implementation of clinical bacteriology in low-resource settings improves patient management, provides valuable surveillance for local antibiotic treatment guidelines and national policies, and supports containment of antimicrobial resistance and the prevention and control of hospital-acquired infections. Copyright © 2018 Elsevier Ltd. All rights reserved.

Materials and energy resources. Report of the research committee working party

International Nuclear Information System (INIS)

1976-01-01

The Working Party has tried to assess the problems likely to stem from future scarcity of a number of important materials and how these interact with the simultaneous depletion of energy resources. The report examines in detail the likely areas of shortages, and their economic, social and political implications, and suggests the various choices for preventive or corrective action. In its recommendations it has delineated areas not only for research but for action by government and by professional and other bodies. The need is forseen for a nuclear power programme of possibly 35 GW(e) by the end of the century part of which could be from fast breeders. Uranium supplies would appear to be adequate only if fast breeders become available. Nuclear fusion is potentially a very large energy source but only for the distant future. (author)

Organizing socially constructed internal and external resources

NARCIS (Netherlands)

Sorge, A

The analysis of economic institutions stands to gain from a consideration of the interactionist theory of institutions, a resource-based view of organizations to develop business and economic perspectives, and a linkage between the two and any theory of economic institutions. A resource-based view

Materials for Consideration in Standardized Canister Design Activities.

Energy Technology Data Exchange (ETDEWEB)

Bryan, Charles R.; Ilgen, Anastasia Gennadyevna; Enos, David George; Teich-McGoldrick, Stephanie; Hardin, Ernest

2014-10-01

This document identifies materials and material mitigation processes that might be used in new designs for standardized canisters for storage, transportation, and disposal of spent nuclear fuel. It also addresses potential corrosion issues with existing dual-purpose canisters (DPCs) that could be addressed in new canister designs. The major potential corrosion risk during storage is stress corrosion cracking of the weld regions on the 304 SS/316 SS canister shell due to deliquescence of chloride salts on the surface. Two approaches are proposed to alleviate this potential risk. First, the existing canister materials (304 and 316 SS) could be used, but the welds mitigated to relieve residual stresses and/or sensitization. Alternatively, more corrosion-resistant steels such as super-austenitic or duplex stainless steels, could be used. Experimental testing is needed to verify that these alternatives would successfully reduce the risk of stress corrosion cracking during fuel storage. For disposal in a geologic repository, the canister will be enclosed in a corrosion-resistant or corrosion-allowance overpack that will provide barrier capability and mechanical strength. The canister shell will no longer have a barrier function and its containment integrity can be ignored. The basket and neutron absorbers within the canister have the important role of limiting the possibility of post-closure criticality. The time period for corrosion is much longer in the post-closure period, and one major unanswered question is whether the basket materials will corrode slowly enough to maintain structural integrity for at least 10,000 years. Whereas there is extensive literature on stainless steels, this evaluation recommends testing of 304 and 316 SS, and more corrosion-resistant steels such as super-austenitic, duplex, and super-duplex stainless steels, at repository-relevant physical and chemical conditions. Both general and localized corrosion testing methods would be used to

Applications of piezoelectric materials in oilfield services.

Science.gov (United States)

Goujon, Nicolas; Hori, Hiroshi; Liang, Kenneth K; Sinha, Bikash K

2012-09-01

Piezoelectric materials are used in many applications in the oilfield services industry. Four illustrative examples are given in this paper: marine seismic survey, precision pressure measurement, sonic logging-while-drilling, and ultrasonic bore-hole imaging. In marine seismics, piezoelectric hydrophones are deployed on a massive scale in a relatively benign environment. Hence, unit cost and device reliability are major considerations. The remaining three applications take place downhole in a characteristically harsh environment with high temperature and high pressure among other factors. The number of piezoelectric devices involved is generally small but otherwise highly valued. The selection of piezoelectric materials is limited, and the devices have to be engineered to withstand the operating conditions. With the global demand for energy increasing in the foreseeable future, the search for hydrocarbon resources is reaching into deeper and hotter wells. There is, therefore, a continuing and pressing need for high-temperature and high-coupling piezoelectric materials.

Production and Resource Scheduling in Mass Customization with Dependent Setup Consideration

DEFF Research Database (Denmark)

Nielsen, Izabela Ewa; Bocewicz, G.; Do, Ngoc Anh Dung

2014-01-01

will contribute to the success of mass customization. This paper addresses the problem of production and resource scheduling for a production system with dependent setup and internal transportation such as AGVs in a mass customization environment. A constraint-programming-based methodology is developed to satisfy...

Modeling resource basis for social and economic development strategies: Water resource case

Science.gov (United States)

Kosolapova, Natalia A.; Matveeva, Ludmila G.; Nikitaeva, Anastasia Y.; Molapisi, Lesego

2017-10-01

The article substantiates that the effectiveness of implementing socio-economic development strategies is to a large extent determined by the adequate provision of basic resources. The key role of water resources in economic strategic development is empirically illustrated. The article demonstrates the practicability of strategic management of water resources based on the principle of a combination of river basin management approaches and the consideration of regional development strategies. The Game Theory technique was used to develop economic and mathematical tools for supporting decision-making in meeting the needs of regional consumers under water balance deficit conditions. The choice of methods was determined from two positions: the methods should allow for the possibility of multi-variant solutions for the selection of optimal options for the distribution of limited water resources between different consumers; the methods should be orientated on the maximum possible harmonization of multidirectional and multi-scale interests of the subjects in the water management system of the different regions (including the state) in order to achieve a balance. The approbation of developing a toolkit for the example of the regions located in the Don and Kuban river basins resulted in the appropriate selection of priority regions for the allocation of water resources in terms of strategic management as well as the determination of measures of ensuring the sustainable use of the river basins under consideration. The proposed tools can be used for coordinating decisions on the water supply of regional economic systems with actual and projected indicators of socio-economic development of the respective regions for a strategic perspective.

Selective classification and quantification model of C&D waste from material resources consumed in residential building construction.

Science.gov (United States)

Mercader-Moyano, Pilar; Ramírez-de-Arellano-Agudo, Antonio

2013-05-01

The unfortunate economic situation involving Spain and the European Union is, among other factors, the result of intensive construction activity over recent years. The excessive consumption of natural resources, together with the impact caused by the uncontrolled dumping of untreated C&D waste in illegal landfills have caused environmental pollution and a deterioration of the landscape. The objective of this research was to generate a selective classification and quantification model of C&D waste based on the material resources consumed in the construction of residential buildings, either new or renovated, namely the Conventional Constructive Model (CCM). A practical example carried out on ten residential buildings in Seville, Spain, enabled the identification and quantification of the C&D waste generated in their construction and the origin of the waste, in terms of the building material from which it originated and its impact for every m(2) constructed. This model enables other researchers to establish comparisons between the various improvements proposed for the minimization of the environmental impact produced by building a CCM, new corrective measures to be proposed in future policies that regulate the production and management of C&D waste generated in construction from the design stage to the completion of the construction process, and the establishment of sustainable management for C&D waste and for the selection of materials for the construction on projected or renovated buildings.

Environmental impact of coal utilization (from raw material to waste resources): Proceedings

International Nuclear Information System (INIS)

Sahu, K.C.

1991-10-01

The proceedings contains 27 papers presented at the conference on environmental impact of coal utilization from raw material to waste resources which was held at the Indian Institute of Technology, Bombay, during 14-15 January 1991. The conference was held as a follow-up of the research project to study the impact of coal utilization. The project was undertaken jointly by the Indian Institute of Technology, Bombay and the University of Western Ontario, Canada. The project was funded by the International Development Research Centre, Ottawa (Canada). The principle themes of the conference were : occurrence of trace elements in coal, fate of trace elements during combustion of coal, characterisation of fly ash and its properties and utilization, and environmental impact of ash disposal. (M.G.B.)

Geologic considerations for the subsurface injection of naturally occurring radioactive materials (NORM): A case study

International Nuclear Information System (INIS)

Ladle, G.H.

1995-01-01

NORM waste consists of naturally occurring radioactive material associated with oil and gas operations as scale deposited in tubulars, surface piping, pumps, and other producing and processing equipment. NORM also occurs as sludge and produced sands at wellheads, transport vessels and tank bottoms. For disposal, NORM scale and sludge are separated from the tubulars and tank bottoms and ground to less than 100 microns and mixed into a slurry at the surface facility for disposal into a deep well injection interval below the Underground Sources of Drinking Water zone. This paper addresses two primary considerations: (1) subsurface geologic investigations which identify specific geologic horizons that have sufficient porosity and permeability to accept NORM slurries containing high total suspended solids concentrations, and (2) surface facility requirements. Generic and specific information, criteria, and examples are included in the paper to allow the application of the geologic principles to other areas or regions

Issues related to the inter-utility transfer of material

International Nuclear Information System (INIS)

1993-08-01

An option that utilities have for obtaining material is to procure the desired item(s) from another utility. There are several reasons utilities choose another utility as the procurement source including item obsolescence, prohibitive cost on the commercial market, and excessive lead time. This document provides information on the technical, quality, and commercial issues which utilities may need to address when selling material to or procuring material from other utilities. This report provides suggested approaches for each of the following technical and quality issues: Design considerations; item acceptability considerations; original supplier considerations; commercial grade item dedication considerations; reportability considerations; packaging, shipping, and storage considerations; documentation considerations; receipt inspection considerations. The information is provided primarily for the inter-utility transfer of safety-related material. Several of the topics, however, may also apply to the transfer of non-safety-related material. The report also provides considerations on commercial issues which may be addressed during the inter-utility transfer of materials

Geotechnical and water resource aspects of uranium mill tailings pile reclamation projects

International Nuclear Information System (INIS)

Caldwell, J.A.; Tackston, J.W.; Portillo, R.

1986-01-01

Design and construction work is currently in progress at more than twenty sites associated with the UMTRA Project - this involves final reclamation of the uranium mill tailings piles so that they are stable for at least 200 years and for up to 1000 years. Remedial action construction plans for the tailings piles involve detailed consideration of the present and possible future ground water and surface-water impacts of the pile. Since the stabilized pile is ultimately a major geotechnical structure, detailed consideration of the long-term resistance to erosion and containment of radioactive material is also required. A case history illustrates how the critical design criteria governing the remedial action activities at the various piles are applied to the pile at the Lakeview site to provide for long-term protection of the water resource and public health and safety

Resource conservation management

International Nuclear Information System (INIS)

Miller, W.

1999-01-01

Resource conservation management is a management program similar to financial management in that its success requires commitment by all levels of the organization to the process as well as an accounting procedure and auditing of critical components. Resource conservation management provides a framework for all elements of efficient building operations and maintenance. The savings connected with the program are principally connected with changes in the way buildings are operated and maintained. Given the reduction in rebates for the installation of energy-efficient equipment, this approach has considerable promise. This paper discusses the evolution of the resource conservation management service and the savings associated with a two-year pilot effort with seven school districts, as well as the critical components of a successful program

Considerations for Contractile Electroactive Polymeric Materials and Actuators

Energy Technology Data Exchange (ETDEWEB)

Rasmussen, Lenore; Erickson, Carl J.; Meixler, Lewis D.; Ascione, George; Gentile, Charles A.; Tilson, Charles; Bernasek, Stephen L.; Abelev, Esta

2009-06-16

Ras Labs produces electroactive polymer (EAP) based materials and actuators that bend, swell, ripple and now contract (new development) with low electric input. This is an important attribute because of the ability of contraction to produce life-like motion. The mechanism of contraction is not well understood. Radionuclide-labeled experiments were conducted to follow the movement of electrolytes and water in these EAPs when activated. Extreme temperature experiments were performed on the contractile EAPs with very favorable results. One of the biggest challenges in developing these actuators, however, is the electrode-EAP interface because of the pronounced movement of the EAP. Plasma treatments of metallic electrodes were investigated in order to improve the attachment of the embedded electrodes to the EAP material. Surface analysis, adhesive testing, and mechanical testing were conducted to test metal surfaces and metal-polymer interfaces. The nitrogen plasma treatment of titanium produced a strong metal-polymer interface; however, oxygen plasma treatment of both stainless steel and titanium produced even stronger metal-polymer interfaces. Plasma treatment of the electrodes allows for the embedded electrodes and the EAP material of the actuator to work and move as a unit, with no detachment, by significantly improving the metal-polymer interface.

Considerations for Contractile Electroactive Polymeric Materials and Actuators

International Nuclear Information System (INIS)

Rasmussen, L.; Erickson, Carl J.; Meixler, Lewis D.; Ascione, G.; Gentile, Charles A.; Tilson, C.; Bernasek, Stephen L.; Abelev, E.

2009-01-01

Ras Labs produces electroactive polymer (EAP) based materials and actuators that bend, swell, ripple and now contract (new development) with low electric input. This is an important attribute because of the ability of contraction to produce life-like motion. The mechanism of contraction is not well understood. Radionuclide-labeled experiments were conducted to follow the movement of electrolytes and water in these EAPs when activated. Extreme temperature experiments were performed on the contractile EAPs with very favorable results. One of the biggest challenges in developing these actuators, however, is the electrode-EAP interface because of the pronounced movement of the EAP. Plasma treatments of metallic electrodes were investigated in order to improve the attachment of the embedded electrodes to the EAP material. Surface analysis, adhesive testing, and mechanical testing were conducted to test metal surfaces and metal-polymer interfaces. The nitrogen plasma treatment of titanium produced a strong metal-polymer interface; however, oxygen plasma treatment of both stainless steel and titanium produced even stronger metal-polymer interfaces. Plasma treatment of the electrodes allows for the embedded electrodes and the EAP material of the actuator to work and move as a unit, with no detachment, by significantly improving the metal-polymer interface

Integrated Data Collection Analysis (IDCA) Program - Mixing Procedures and Materials Compatibility

Energy Technology Data Exchange (ETDEWEB)

Olinger, Becky D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Sandstrom, Mary M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Warner, Kirstin F. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States); Sorensen, Daniel N. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States); Remmers, Daniel L. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States); Moran, Jesse S. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States); Shelley, Timothy J. [Air Force Research Lab. (AFRL), Tyndall AFB, FL (United States); Whinnery, LeRoy L. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Hsu, Peter C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Whipple, Richard E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kashgarian, Michaele [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reynolds, John G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2011-01-14

Three mixing procedures have been standardized for the IDCA proficiency test—solid-solid, solid-liquid, and liquid-liquid. Due to the variety of precursors used in formulating the materials for the test, these three mixing methods have been designed to address all combinations of materials. Hand mixing is recommended for quantities less than 10 grams and Jar Mill mixing is recommended for quantities over 10 grams. Consideration must also be given to the type of container used for the mixing due to the wide range of chemical reactivity of the precursors and mixtures. Eight web site sources from container and chemical manufacturers have been consulted. Compatible materials have been compiled as a resource for selecting containers made of materials stable to the mixtures. In addition, container materials used in practice by the participating laboratories are discussed. Consulting chemical compatibility tables is highly recommended for each operation by each individual engaged in testing the materials in this proficiency test.

Protein Structure Initiative Material Repository: an open shared public resource of structural genomics plasmids for the biological community

Science.gov (United States)

Cormier, Catherine Y.; Mohr, Stephanie E.; Zuo, Dongmei; Hu, Yanhui; Rolfs, Andreas; Kramer, Jason; Taycher, Elena; Kelley, Fontina; Fiacco, Michael; Turnbull, Greggory; LaBaer, Joshua

2010-01-01

The Protein Structure Initiative Material Repository (PSI-MR; http://psimr.asu.edu) provides centralized storage and distribution for the protein expression plasmids created by PSI researchers. These plasmids are a resource that allows the research community to dissect the biological function of proteins whose structures have been identified by the PSI. The plasmid annotation, which includes the full length sequence, vector information and associated publications, is stored in a freely available, searchable database called DNASU (http://dnasu.asu.edu). Each PSI plasmid is also linked to a variety of additional resources, which facilitates cross-referencing of a particular plasmid to protein annotations and experimental data. Plasmid samples can be requested directly through the website. We have also developed a novel strategy to avoid the most common concern encountered when distributing plasmids namely, the complexity of material transfer agreement (MTA) processing and the resulting delays this causes. The Expedited Process MTA, in which we created a network of institutions that agree to the terms of transfer in advance of a material request, eliminates these delays. Our hope is that by creating a repository of expression-ready plasmids and expediting the process for receiving these plasmids, we will help accelerate the accessibility and pace of scientific discovery. PMID:19906724

State planning policy 2/07: protection of extractive resources results in certainty of materials supply

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-09-15

Extractive resources are primary source materials used for building infrastructure such as roads, ports, airports, bridges, railways, factories, hospitals, schools and homes. The Policy seeks to protect those essential and finite construction materials for future and existing extraction purposes. Population increases in south-east Queensland the upgrading of rail and port facilities to export coal and other minerals will form a major part in the expansion of extractive industry. Over $4 billion has been committed by the Government and industry to coal infrastructure developments such as upgrades at RG Tanna, Barney Point and the proposed Wiggins Island coal terminals at Gladstone, the Dalryample Bay and Hay Point terminals near Mackay and the Abbot Point coal terminal near Bower. The new Bauhinia regional railway will service the Rolleston coal mines.

Integrated Resource Management and Recovery

DEFF Research Database (Denmark)

Astrup, Thomas Fruergaard

2014-01-01

, depends on the quality of these resources and technological abilities to extract resources from mixed materials, e.g. mobile phones, solar cells, or mixed domestic waste. The "effort" invested in recovery of secondary resources should not be more than the "benefit" associated with the secondary resources...

Issues about Human Resources Recruitment

OpenAIRE

Aurel Manolescu

2008-01-01

As to ensure its success or even for surviving, organizations must settle accordingly some issues regarding the human resources enlistment, presented in great details within the article, whose success settlement ensure, concomitantly, the success of the entire assurance process with personnel, process extremely important, if there are taken into consideration, especially, the effects of some possible errors or hire errors. Therefore, the human resources recruitment tends to become a complex a...

Equity Considerations for Open Educational Resources in the Glocalization of Education

Science.gov (United States)

Willems, Julie; Bossu, Carina

2012-01-01

Open educational resources (OER) have become new buzzwords in the glocalization of education. While OER are often espoused as enabling educational equity, the reality is not always the case. Looking only at the positives of new educational methods can mask perpetuating challenges, which makes the open aspect of OER a misnomer. Taking an…

Resource price turbulence and macroeconomic adjustment for a resource exporter. A conceptual framework for policy analysis

International Nuclear Information System (INIS)

Cox, Grant M.; Harvie, Charles

2010-01-01

Increased global demand for energy and other resources, particularly from the rapidly developing economies of China and India and the opening up of global resource markets to global investors and speculative activity, has resulted in considerable recent turbulence in resource prices. The recent magnitude of change in resource prices, both positive and negative, and their macroeconomic implications is of considerable contemporary importance to both resource importing and exporting economies. For a resource exporting economy, such as that of Australia, the recent resource price boom has resulted in: increased government taxation revenue, increased employment and wages in the resource and resource related sectors, increased spending in the domestic economy that contributed to buoyant economic growth, increased resource exports to the booming economies of China and India and contributed to a stronger domestic currency with beneficial effects upon inflation. On the other hand these developments have had adverse effects on the non-resource sector by: subjecting it to more intense competition for limited resources, contributing to a loss of international competitiveness and reduced exports arising from a stronger exchange rate, reducing employment in the relatively more labour intensive non-resource sector, and contributing to an eventual slow down in the overall economy. These positive and negative effects, and the overall impact of a resource price boom, require a fundamentally closer analysis of the structure of the economy under scrutiny. In this context the policy response by government is likely to be pivotal in determining the overall macroeconomic outcomes from a resource price boom. The aim of this paper is to develop a generic analytical framework to appraise economic outcomes in the wake of a resource price boom for a resource producing and exporting economy. To this end a dynamic long run macroeconomic model is developed, emphasising the important role and

Managing Human Resource Learning for Innovation

DEFF Research Database (Denmark)

Nielsen, Peter

Managing human resource learning for innovation develops a systemic understanding of building innovative capabilities. Building innovative capabilities require active creation, coordination and absorption of useful knowledge and thus a cohesive management approach to learning. Often learning...... in organizations and work is approached without considerations on how to integrate it in the management of human resources. The book investigates the empirical conditions for managing human resources learning for innovation. With focus on innovative performance the importance of modes of innovation, clues...

Cardiopulmonary Resuscitation in Resource-limited Health Systems-Considerations for Training and Delivery.

Science.gov (United States)

Friesen, Jason; Patterson, Dean; Munjal, Kevin

2015-02-01

In the past 50 years, cardiopulmonary resuscitation (CPR) has gained widespread recognition as a life-saving skill that can be taught successfully to the general public. Cardiopulmonary resuscitation can be considered a cost-effective intervention that requires minimal classroom training and low-cost equipment and supplies; it is commonly taught throughout much of the developed world. But, the simplicity of CPR training and its access for the general public may be misleading, as outcomes for patients in cardiopulmonary arrest are poor and survival is dependent upon a comprehensive "chain-of-survival," which is something not achieved easily in resource-limited health care settings. In addition to the significant financial and physical resources needed to both train and develop basic CPR capabilities within a community, there is a range of ethical questions that should also be considered. This report describes some of the financial and ethical challenges that might result from CPR training in low- and middle-income countries (LMICs). It is determined that for many health care systems, CPR training may have financial and ethically-deleterious, unintended consequences. Evidence shows Basic Life Support (BLS) skills training in a community is an effective intervention to improve public health. But, health care systems with limited resources should include CPR training only after considering the full implications of that intervention.

Questions of quality in repositories of open educational resources: a literature review

Directory of Open Access Journals (Sweden)

Javiera Atenas

2014-07-01

Full Text Available Open educational resources (OER are teaching and learning materials which are freely available and openly licensed. Repositories of OER (ROER are platforms that host and facilitate access to these resources. ROER should not just be designed to store this content – in keeping with the aims of the OER movement, they should support educators in embracing open educational practices (OEP such as searching for and retrieving content that they will reuse, adapt or modify as needed, without economic barriers or copyright restrictions. This paper reviews key literature on OER and ROER, in order to understand the roles ROER are said or supposed to fulfil in relation to furthering the aims of the OER movement. Four themes which should shape repository design are identified, and the following 10 quality indicators (QI for ROER effectiveness are discussed: featured resources; user evaluation tools; peer review; authorship of the resources; keywords of the resources; use of standardised metadata; multilingualism of the repositories; inclusion of social media tools; specification of the creative commons license; availability of the source code or original files. These QI form the basis of a method for the evaluation of ROER initiatives which, in concert with considerations of achievability and long-term sustainability, should assist in enhancement and development.

Biomechanical characteristics of single-row repair in comparison to double-row repair with consideration of the suture configuration and suture material

OpenAIRE

Baums, M. H.; Buchhorn, G. H.; Spahn, G.; Poppendieck, B.; Schultz, W.; Klinger, H.-M.

2008-01-01

The aim of the study was to evaluate the time zero mechanical properties of single- versus double-row configuration for rotator cuff repair in an animal model with consideration of the stitch technique and suture material. Thirty-two fresh-frozen sheep shoulders were randomly assigned to four repair groups: suture anchor single-row repair coupled with (1) braided, nonabsorbable polyester suture sized USP No. 2 (SRAE) or (2) braided polyblend polyethylene suture sized No. 2 (SRAH). The double-...

Cultural Differences in Opportunity Cost Consideration.

Science.gov (United States)

Zhang, Ning; Ji, Li-Jun; Li, Ye

2017-01-01

Two studies were conducted to investigate cultural differences in opportunity cost consideration between Chinese and Euro-Canadians. Opportunity cost is defined as the cost of a benefit that must be forgone in order to pursue a better alternative (Becker et al., 1974). In both studies, participants read about hypothetical purchase scenarios, and then decided whether they would buy a certain product. Opportunity cost consideration was measured in two ways: (1) participants' thoughts pertaining to other (nonfocal) products while making decisions; (2) participants' decisions not to buy a focal product (Study 1) or a more expensive product (Study 2). Across both indexes, we found that after controlling for individual difference variables and amount of pocket money, Chinese participants in China considered financial opportunity cost more than Euro-Canadians in Study 1. Similar results were observed in Study 2 when comparing Chinese in Canada with Euro-Canadians However, the cultural effect on opportunity cost consideration was confounded by family income in Study 2. Implications for resource management, limitations of the current research and directions for future research are discussed.

Modelling of motorway tunnels scenario for utilization of conditionally released radioactive materials

International Nuclear Information System (INIS)

Hrncir, Tomas; Panik, Michal; Necas, Vladimir

2011-01-01

Considerable amount of solid radioactive waste with radioactivity slightly above the limits for unconditional release is generated during the decommissioning of the nuclear installations. Conditional release deals with precisely this type of materials with activity slightly above limits in order to save considerable financial resources, which would be otherwise spend on treatment, conditioning and disposal of these materials at appropriate repository. The basic principles of conditional release as well as possibilities of reusing of the conditionally released materials are described. One of these possibilities of the reusing was chosen and application proposal of conditional release of metal waste - steel reinforcement in the concrete, which could be used for construction of motorway tunnels, was created. The computer code Visiplan 4.0 3D ALARA planning tool software was used for the calculation of effective individual dose for personnel constructing the tunnel and for critical group related to scenario. Particular models for individual scenarios of conditional release have been developed within the scope of this software code. The aim of the paper is to determine a level of the radioactivity of conditional released materials to avoid over exceeding the value of annual individual effective dose 10μSv/year established by international recommendations. (author)

Information Technology Resources Assessment

Energy Technology Data Exchange (ETDEWEB)

1993-04-01

The Information Technology Resources Assessment (ITRA) is being published as a companion document to the Department of Energy (DOE) FY 1994--FY 1998 Information Resources Management Long-Range Plan. This document represents a collaborative effort between the Office of Information Resources Management and the Office of Energy Research that was undertaken to achieve, in part, the Technology Strategic Objective of IRM Vision 21. An integral part of this objective, technology forecasting provides an understanding of the information technology horizon and presents a perspective and focus on technologies of particular interest to DOE program activities. Specifically, this document provides site planners with an overview of the status and use of new information technology for their planning consideration.

Material and energy productivity.

Science.gov (United States)

Steinberger, Julia K; Krausmann, Fridolin

2011-02-15

Resource productivity, measured as GDP output per resource input, is a widespread sustainability indicator combining economic and environmental information. Resource productivity is ubiquitous, from the IPAT identity to the analysis of dematerialization trends and policy goals. High resource productivity is interpreted as the sign of a resource-efficient, and hence more sustainable, economy. Its inverse, resource intensity (resource per GDP) has the reverse behavior, with higher values indicating environmentally inefficient economies. In this study, we investigate the global systematic relationship between material, energy and carbon productivities, and economic activity. We demonstrate that different types of materials and energy exhibit fundamentally different behaviors, depending on their international income elasticities of consumption. Biomass is completely inelastic, whereas fossil fuels tend to scale proportionally with income. Total materials or energy, as aggregates, have intermediate behavior, depending on the share of fossil fuels and other elastic resources. We show that a small inelastic share is sufficient for the total resource productivity to be significantly correlated with income. Our analysis calls into question the interpretation of resource productivity as a sustainability indicator. We conclude with suggestions for potential alternatives.

The material footprint of nations.

Science.gov (United States)

Wiedmann, Thomas O; Schandl, Heinz; Lenzen, Manfred; Moran, Daniel; Suh, Sangwon; West, James; Kanemoto, Keiichiro

2015-05-19

Metrics on resource productivity currently used by governments suggest that some developed countries have increased the use of natural resources at a slower rate than economic growth (relative decoupling) or have even managed to use fewer resources over time (absolute decoupling). Using the material footprint (MF), a consumption-based indicator of resource use, we find the contrary: Achievements in decoupling in advanced economies are smaller than reported or even nonexistent. We present a time series analysis of the MF of 186 countries and identify material flows associated with global production and consumption networks in unprecedented specificity. By calculating raw material equivalents of international trade, we demonstrate that countries' use of nondomestic resources is, on average, about threefold larger than the physical quantity of traded goods. As wealth grows, countries tend to reduce their domestic portion of materials extraction through international trade, whereas the overall mass of material consumption generally increases. With every 10% increase in gross domestic product, the average national MF increases by 6%. Our findings call into question the sole use of current resource productivity indicators in policy making and suggest the necessity of an additional focus on consumption-based accounting for natural resource use.

Raw materials in the manufacture of biotechnology products: regulatory considerations.

Science.gov (United States)

Cordoba-Rodriguez, Ruth

2010-01-01

The Food and Drug Administration's Pharmaceutical cGMPs for the 21st Century initiative emphasizes science and risk-based approaches in the manufacture of drugs. These approaches are reflected in the International Conference on Harmonization (ICH) guidances ICH Q8, Q9, and Q10 and encourage a comprehensive assessment of the manufacture of a biologic, including all aspects of manufacture that have the potential to affect the finished drug product. Appropriate assessment and management of raw materials are an important part of this initiative. Ideally, a raw materials program should strive to assess and minimize the risk to product quality. With this in mind, risk-assessment concepts and control strategies will be discussed and illustrated by examples, with an emphasis on the impact of raw materials on cell substrates. Finally, the life cycle of the raw material will be considered, including its potential to affect the drug product life cycle. In this framework, the supply chain and the vendor-manufacturer relationship will be explored as important parts of an adequate raw materials control strategy.

Open Educational Resources

Science.gov (United States)

McShane, Michael Q.

2017-01-01

While digital products have made significant inroads into the educational resources market, textbooks and other print materials still command about 60 percent of sales. But whether print or digital, all of these commercial offerings now face threats from a burgeoning effort to promote "open" resources for education--that is, materials…

The potential impact of externalities considerations on the market for biomass power technologies

International Nuclear Information System (INIS)

Swezey, B.G.; Porter, K.L.; Feher, J.S.

1995-01-01

Of all the renewable energy sources used for power generation, biomass energy has experienced the greatest growth over the last decade. Spurred by requirements established in the Public Utility Regulatory Policies Act of 1978 (PURPA), as well as various tax incentives, biomass-based power generation now provides more than 50 billion kWh of electric energy from 10,000 MW of installed capacity. The overwhelming majority of this capacity, primarily wood-based, has been developed by the nonutility sector. However, the biomass industry is currently facing more difficult market conditions due to a reduction in federal incentives and changes in the generation market, such as lower utility avoided costs, slower demand growth, and greater competition among both generators and fuel sources. States are increasingly contemplating the inclusion of market externalities costs and benefits associated with different generation options in electricity resource planning and procurement decisions. Market externalities, as they relate to generation resources and technologies, represent impacts that are not wholly reflected in the market price of electricity derived from these sources. These impacts, which can be either positive or negative, can encompass environmental, economic and other social factors, but state considerations have focused predominantly on environmental externalities costs, especially air emissions. The explicit quantification of externalities could measurably affect the competitive standing of various energy resources and technologies in future generation resource acquisitions. This paper summarizes work undertaken to assess the status the externalities considerations in state and utility electricity resource planning processes and to determine how externalities considerations might help or hinder future development of biomass power plants. (author)

A Systemic and Systematic Approach to the Development of a Policy Mix for Material Resource Efficiency

Directory of Open Access Journals (Sweden)

Tomas Ekvall

2016-04-01

Full Text Available Increasing material use efficiency is important to mitigate future supply risks and minimize environmental impacts associated with the production of the materials. The policy mix presented in this paper aims to contribute to reducing the use of virgin metals in the EU by 80% by 2050 without significant shifting of burdens to other material resources, environmental impacts, or parts of the world. We used a heuristic framework and a systems perspective for designing the policy mix that combines primary instruments designed to increase material efficiency, recycling and substitution of materials (a materials tax, the extended producer responsibility, technical regulations, and environmental taxes and supportive instruments aimed to reduce barriers to implementing the primary instruments and to contribute towards the policy objectives (e.g., research and development support, and advanced recycling centers. Furthermore, instruments were designed so as to increase political feasibility: e.g., taxes were gradually increased as part of a green fiscal reform, and border-tax adjustments were introduced to reduce impacts on competitiveness. However, even in such a policy mix design ongoing ex-ante assessments indicate that the policy mix will be politically difficult to implement—and also fall short of achieving the 80% reduction target. Nonetheless, we suggest combining primary and supportive instruments into coherent and dynamic policy mixes as a promising step towards system reconfigurations for sustainability.

How strategic considerations influence decision making on e-HRM applications

NARCIS (Netherlands)

Schalk, R.; Timmerman, V.; van den Heuvel, S.R.H.

2013-01-01

Although numerous studies indicate that the added value of human resource management is strongest when HRM decisions are linked to the organizational strategy, practical knowledge about how strategic considerations influence decision-making processes relating to e-HRM is limited. Therefore, the

[Basic ethical considerations in intensive care--Switzerland, a pluralistic country].

Science.gov (United States)

Muller, A F

1995-06-10

The basic ethical considerations surrounding intensive care are analyzed from the historical perspective, with particular reference to the two doctrines still of greatest importance: Kantianism and utilitarianism. They are correlated with the four essential principles of medical ethics: autonomy of the patient, quality, nihil nocere, and equal distribution of medical resources. The inevitable conflicts, particularly arising from pluralism, are reviewed. Finally, the absolute need is stressed for a global medical ethics taking into consideration not only the patient but society as a whole.

Considerations for producing re-usable and sustainable educational streaming materials

Directory of Open Access Journals (Sweden)

Gayle Calverley

2006-02-01

Full Text Available Useful lifetime of educational materials should be defined by their continuing ability to help meet defined learning objectives. More often lifetime is compromised by changes in the educational environment that do not specifically relate to the capacity of the material to assist learning. Approaches for integration of materials into the learning environment can be designed to maximise useful lifetime of materials against potential barriers created by, for example, instances of technological change. In this study, the impact of different approaches is demonstrated by examining the development of 163 learning objects, based on several licensed collections of streaming video procured for cross-sector educational use by the UK Lifesign project. Constraints relating to sustainability work within the limitations of a short-term project environment are specifically considered.

Consideration of the Effect according to Variation of Material and Respiration in Cone-Beam CT

International Nuclear Information System (INIS)

Na, Jun Young; Kim, Jung Mi; Kim, Dae Sup; Kang, Tae Young; Baek, Geum Mun; Kwon, Gyeong Tae

2012-01-01

Image Guided Radiation Therapy (IGRT) has been carried out using On-Board Imager system (OBI) in Asan Medical Center. For this reason, This study was to analyze and evaluate the impact on Cone-Beam CT according to variation of material and respiration. This study was to acquire and analyze Cone-Beam CT three times for two material: Cylider acryl (lung equvalent material, diameter 3 cm), Fiducial Marker (using clinic) under Motion Phantom able to adjust respiration pattern randomly was varying period, amplitude and baseline vis-a-vis reference respiration pattern. First, According to a kind of material, when being showed 100% in the acryl and 120% in the Fiducial Marker under the condition of same movement of the motion phantom. Second, According to the respiratory alteration, when being showed 1.13 in the baseline shift 1.8 mm and 1.27 in the baseline shift 3.3 mm for acryl. when being showed 1.01 in 1 sec of period and 1.045 in 2.5 sec of period for acryl. When being showed 0.86 in 0.7 times the standard of amplitude and 1.43 in 1.7 times the standard of amplitude for acryl. when being showed 1.18 in the baseline shift 1.8 mm and 1.34 in the baseline shift 3.3 mm for Fiducial Marker. when being showed 1.0 in 1 sec of period and 1.0 in 2.5 sec of period for Fiducial Marker. When being showed 0.99 in 0.7 times the standard of amplitude and 1.66 in 1.7 times the standard of amplitude for Fiducial Marker. The effect of image size of CBCT was 20% in the case of Fiducial marker. The impact of changes in breathing pattern was minimum 13% - maximum 43% for Arcyl, min. 18% - max. 66% for Fiducial marker. This difference makes serious uncertainty. So, Must be stabilized breathing of patient before acquiring CBCT. also must be monitored breathing of patient in the middle of acquire. If you observe considerable change of breathing when acquiring CBCT. After Image Guided, must be need to check treatment site using fluoroscopy. If a change is too big, re-acquiring CBCT.

Considerations of ensuring efficient consumption of energy resources in the Republic of Moldova

Directory of Open Access Journals (Sweden)

Sveatoslav MIHALACHE

2016-09-01

Full Text Available Protecting the environment is essential nowadays. We have to think about us and the needs of future generations. In the last 20 years, Europe has understood that lives beyond its real opportunities and that our way of life put the planet to the test. We consume more and more of the natural resources and jeopardize environmental systems (water, soil and air. This cannot continue indefinitely, especially since the world’s population continues to grow. If we don’t change behavior now, our future will be less secured and more people will fight for natural resources increasingly reduced. Mentioned issues are examined in the following article.

Air pollution, cardiovascular endpoints and susceptibility by stress and material resources: a systematic review of the evidence.

Science.gov (United States)

Fuller, Christina H; Feeser, Karla R; Sarnat, Jeremy A; O'Neill, Marie S

2017-06-14

Evidence shows that both the physical and social environments play a role in the development of cardiovascular disease. The purpose of this systematic review is two-fold: First, we summarize research from the past 12 years from the growing number of studies focused on effect modification of the relationships between air pollution and cardiovascular disease (CVD) outcomes by socioeconomic position (SEP) and; second, we identify research gaps throughout the published literature on this topic and opportunities for addressing these gaps in future study designs. We identified 30 articles that examined the modifying effects of either material resources or psychosocial stress (both related to SEP) on associations between short and long-term air pollution exposure and CVD endpoints. Although 18 articles identified at least one interaction between an air pollutant and material resource indicator, 11 others did not. Support for susceptibility to air pollution by psychosocial stress was weaker; however, only three articles tested this hypothesis. Further studies are warranted to investigate how air pollution and SEP together may influence CVD. We recommend that such research include thorough assessment of air pollution and SEP correlations, including spatial correlation; investigate air pollution indices or multi-pollutant models; use standardized metrics of SEP to enhance comparability across studies; and evaluate potentially susceptible populations.

Resourceful Thinking about Printing and Related Industries: Economic Considerations and Environmental Sustainability

Science.gov (United States)

Wikina, Suanu Bliss; Thompson, Cynthia Carlton; Blackwell, Elinor

2010-01-01

Increasing population, total economic volume, and human consumption levels have resulted in problems of resource shortages, climate change, ozone layer depletion, land regression, and deteriorating environmental pollution. Printing and related industries constitute one of the major sources of environmental pollution due to heavy energy and…

Academic Resourcefulness, Coping Strategies and Doubting in University Undergraduates

Science.gov (United States)

Xuereb, Sharon

2015-01-01

This study hypothesised that academic resourcefulness and coping strategies would predict doubting amongst university undergraduates. Doubting refers to the serious consideration of prematurely withdrawing from university. It was predicted that mature students would report higher levels of academic resourcefulness and adaptive coping strategies,…

Linking material flow analysis and resource policy via future scenarios of in-use stock: an example for copper.

Science.gov (United States)

Gerst, Michael D

2009-08-15

A key aspect to achieving long-term resource sustainability is the development of methodologies that explore future material cycles and their environmental impact. Using a novel dynamic in-use stock model and scenario analysis, I analyzed the multilevel global copper cycle over the next 100 years. In 1990, the industrialized world had an in-use copper stock about twice as large as the developing world and a per capita in-use stock of about six times as large. By 2100, the developing world will have an in-use copper stock about three times as large as the industrialized world, but the industrialized world will maintain a per capita stock twice that of the developing world. Under a scenario of no material substitution or technological change in copper products, global in-use stock in 2100 will be about as large as currently known copper resources. However, current scrap recycling trends and exploration will alleviate absolute supply pressure but not environmental impacts from decreasing copper are grades. Additionally, unexpected emergent properties of dematerialization are observed from the in-use stock model that arise solely from the properties of stock dynamics, an infrequently discussed cause of dematerialization in the literature.

An information system for sustainable materials management with material flow accounting and waste input–output analysis

Directory of Open Access Journals (Sweden)

Pi-Cheng Chen

2017-05-01

Full Text Available Sustainable materials management focuses on the dynamics of materials in economic and environmental activities to optimize material use efficiency and reduce environmental impact. A preliminary web-based information system is thus developed to analyze the issues of resource consumption and waste generation, enabling countries to manage resources and wastes from a life cycle perspective. This pioneering system features a four-layer framework that integrates information on physical flows and economic activities with material flow accounting and waste input–output table analysis. Within this framework, several applications were developed for different waste and resource management stakeholders. The hierarchical and interactive dashboards allow convenient overview of economy-wide material accounts, waste streams, and secondary resource circulation. Furthermore, the system can trace material flows through associated production supply chain and consumption activities. Integrated with economic models; this system can predict the possible overloading on the current waste management facility capacities and provide decision support for designing strategies to approach resource sustainability. The limitations of current system are specified for directing further enhancement of functionalities.

Space and Planetary Resources

Science.gov (United States)

Abbud-Madrid, Angel

2018-02-01

The space and multitude of celestial bodies surrounding Earth hold a vast wealth of resources for a variety of space and terrestrial applications. The unlimited solar energy, vacuum, and low gravity in space, as well as the minerals, metals, water, atmospheric gases, and volatile elements on the Moon, asteroids, comets, and the inner and outer planets of the Solar System and their moons, constitute potential valuable resources for robotic and human space missions and for future use in our own planet. In the short term, these resources could be transformed into useful materials at the site where they are found to extend mission duration and to reduce the costly dependence from materials sent from Earth. Making propellants and human consumables from local resources can significantly reduce mission mass and cost, enabling longer stays and fueling transportation systems for use within and beyond the planetary surface. Use of finely grained soils and rocks can serve for habitat construction, radiation protection, solar cell fabrication, and food growth. The same material could also be used to develop repair and replacement capabilities using advanced manufacturing technologies. Following similar mining practices utilized for centuries on Earth, identifying, extracting, and utilizing extraterrestrial resources will enable further space exploration, while increasing commercial activities beyond our planet. In the long term, planetary resources and solar energy could also be brought to Earth if obtaining these resources locally prove to be no longer economically or environmentally acceptable. Throughout human history, resources have been the driving force for the exploration and settling of our planet. Similarly, extraterrestrial resources will make space the next destination in the quest for further exploration and expansion of our species. However, just like on Earth, not all challenges are scientific and technological. As private companies start working toward

Curriculum/Resource Development: The "C.A.R.E for St. Lucia" Resource Pack.

Science.gov (United States)

Strong, Michelle

1993-01-01

Describes a resource packet that utilizes a four-point approach to make environmental action concerning land use more accessible to teachers. The points are construct a map of the area under consideration; assess the impact of historical development, natural cycles, mining, and eco-tourism on the problem; research land use options; and encourage…

Consideration of radiation effects in the choice of packaging materials

International Nuclear Information System (INIS)

Moore, P.W.

1985-01-01

Requirements for food packaging materials include whether there is any interaction between the food and the package during or after the irradiation, and whether as a result of the irradiation, volatile or leachable substances are released from the pack into the food. The performance of cellulose-based materials and plastic films under irradiation are discussed

Financial and economic considerations for emergency response providers.

Science.gov (United States)

Liong, Anne S; Liong, Samuel U

2010-12-01

Catastrophic events often threaten or cause depletion of resources. It is generally accepted that changes inherent to disasters are stressful. The Conservation of Resources Theory predicts that positive and negative changes in resources will have markedly different effects.28 This theory proposes that resource losses are psychologically stressful, whereas resource gains buffer against the effects of resource loss. For first responders, the level of preparedness is crucial. Investments in planning, training, and logistics are necessary to mitigate the stress associated with a crisis. Stress is also related to not knowing the future of their loved ones if death or permanent incapacity occurs, hence specific laws and financial resources provide a safety net to dependents of first responders and survivors. This kind of safety gives the first responders peace of mind and assurance that the future of their dependents will not be jeopardized. Incentives that are offered let the first responders know that they are valued and appreciated. Indeed, financial support considerably helps first responders before, during, and after catastrophic events. It assists them to cope with stress at the individual level and allows them to become more resilient; this resonates to the community and country in which they serve and enhances their potential to save lives and prevent disabilities. Copyright © 2010 Elsevier Inc. All rights reserved.

Resource sharing of online teaching materials: The lon-capa project

Science.gov (United States)

Bauer, Wolfgang

2004-03-01

The use of information technology resources in conventional lecture-based courses, in distance-learning offerings, as well as hybrid courses, is increasing. But this may put additional burden on faculty, who are now asked to deliver this new content. Additionally, it may require the installation of commercial courseware systems, putting the colleges and universities in new financial licensing dependencies. To address exactly these two problems, the lon-capa system was invented to provide an open-source, gnu public license based, courseware system that allows for sharing of educational resources across institutional and disciplinary boundaries. This presentation will focus on both aspects of the system, the courseware capabilities that allow for customized environments for individual students, and the educational resources library that enables teachers to take full advantages of the work of their colleagues. Research results on learning effectiveness, resource and system usage patterns, and customization for different learning styles will be shown. Institutional perceptions of and responses to open source courseware systems will be discussed.

An overview of regulatory, environmental and social siting considerations

Energy Technology Data Exchange (ETDEWEB)

Jones, Jason [Tetra Tech (United States)

2011-07-01

There is the potential for involvement of different levels of government and many other actors in the location and, finally, the feasibility of a modern wind energy project. This paper gives an overview of the social, regulatory, and environmental considerations that can influence the location of a wind energy project. At the beginning the site has to be identified and wind resources and transmission feasibility have to be assessed. Environmental and engineering issues and public and government acceptability have to be considered. Federal, provincial, local and municipal considerations are discussed. A fatal flaw analysis also known as Critical Issues Analysis (CIA) is performed and the results are given. Constructability issues, telecommunications and aviation screening are omitted from the CIA. Different reasons for setbacks and causes of concern are mentioned and explained. Bird and bat fatalities from collision with turbines are mentioned as a concern. Studies relating to matters of heritage and cultural resources have also been conducted. Finally, issues relating to socioeconomic impact, communications infrastructure and transportation issues are discussed.

Nonregenerative natural resources in a sustainable system of energy supply.

Science.gov (United States)

Bradshaw, Alex M; Hamacher, Thomas

2012-03-12

Following the lead of the European Union in introducing binding measures to promote the use of regenerative energy forms, it is not unreasonable to assume that the global demand for combustible raw materials for energy generation will be reduced considerably in the second half of this century. This will not only have a favourable effect on the CO(2) concentration in the atmosphere, but will also help preserve fossil fuels-important as raw materials in the chemical industry-for future generations. Nevertheless, associated with the concomitant massive shift to regenerative energy forms, there will be a strong demand for other exhaustible raw materials, in particular metals, some of which are already regarded as scarce. After reviewing the debate on mineral depletion between "cornucopians" and "pessimists", we discuss the meaning of mineral "scarcity", particularly in the geochemical sense, and mineral "exhaustion". The expected drastic increase in demand for mineral resources caused by demographic and societal pressures, that is, due to the increase in in-use stock, is emphasised. Whilst not discussing the issue of "strong" versus "weak" sustainability in detail, we conclude that regenerative energy systems-like nearly all resource-consuming systems in our society-do not necessarily satisfy generally accepted sustainability criteria. In this regard, we discuss some current examples, namely, lithium and cobalt for batteries, rare earth-based permanent magnets for wind turbines, cadmium and tellurium for solar cells and copper for electrical power distribution. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Consideration of reference points for the management of renewable resources under an adaptive management paradigm

Science.gov (United States)

Irwin, Brian J.; Conroy, Michael J.

2013-01-01

The success of natural resource management depends on monitoring, assessment and enforcement. In support of these efforts, reference points (RPs) are often viewed as critical values of management-relevant indicators. This paper considers RPs from the standpoint of objective-driven decision making in dynamic resource systems, guided by principles of structured decision making (SDM) and adaptive resource management (AM). During the development of natural resource policy, RPs have been variously treated as either ‘targets’ or ‘triggers’. Under a SDM/AM paradigm, target RPs correspond approximately to value-based objectives, which may in turn be either of fundamental interest to stakeholders or intermediaries to other central objectives. By contrast, trigger RPs correspond to decision rules that are presumed to lead to desirable outcomes (such as the programme targets). Casting RPs as triggers or targets within a SDM framework is helpful towards clarifying why (or whether) a particular metric is appropriate. Further, the benefits of a SDM/AM process include elucidation of underlying untested assumptions that may reveal alternative metrics for use as RPs. Likewise, a structured decision-analytic framework may also reveal that failure to achieve management goals is not because the metrics are wrong, but because the decision-making process in which they are embedded is insufficiently robust to uncertainty, is not efficiently directed at producing a resource objective, or is incapable of adaptation to new knowledge.

Aerospace materials and material technologies

CERN Document Server

Wanhill, R

2017-01-01

This book is a comprehensive compilation of chapters on materials (both established and evolving) and material technologies that are important for aerospace systems. It considers aerospace materials in three Parts. Part I covers Metallic Materials (Mg, Al, Al-Li, Ti, aero steels, Ni, intermetallics, bronzes and Nb alloys); Part II deals with Composites (GLARE, PMCs, CMCs and Carbon based CMCs); and Part III considers Special Materials. This compilation has ensured that no important aerospace material system is ignored. Emphasis is laid in each chapter on the underlying scientific principles as well as basic and fundamental mechanisms leading to processing, characterization, property evaluation and applications. A considerable amount of materials data is compiled and presented in appendices at the end of the book. This book will be useful to students, researchers and professionals working in the domain of aerospace materials.

Safe recycling of materials containing persistent inorganic and carbon nanoparticles

NARCIS (Netherlands)

Reijnders, L.; Njuguna, J.; Pielichowski, K.; Zhu, H.

2014-01-01

For persistent inorganic and carbon nanomaterials, considerable scope exists for a form of recycling called ‘resource cascading’. Resource cascading is aimed at the maximum exploitation of quality and service time of natural resources. Options for resource cascading include engineered nanomaterials

Wind resource analysis. Annual report

Energy Technology Data Exchange (ETDEWEB)

Hardy, D. M.

1978-12-01

FY78 results of the Wind Resource Analyses task of the ERAB are described. Initial steps were taken to acquire modern atmosphere models of near-surface wind flow and primary data sets used in previous studies of national and regional wind resources. Because numerous assumptions are necessary to interpret available data in terms of wind energy potential, conclusions of previous studies differ considerably. These data analyses may be improved by future SERI research. State-of-the-art atmosphere models are a necessary component of the SERI wind resource analyses capacity. However, these methods also need to be tested and verified in diverse applications. The primary data sets and principal features of the models are discussed.

BUILDING MATERIALS AND PRODUCTS BASED ON SILICON MANGANESE SLAGS

Directory of Open Access Journals (Sweden)

BOLSHAKOV V. I.

2016-05-01

Full Text Available Raising of problem. Currently of particular relevance was given to the matter of introduction in manufacture of building materials and products, resource-saving techniques and technologies; integrated use of raw materials and materials that prevent or significantly reduce their harmful impact on the environment. This allows you to recycle hundreds of thousands of tons of the fiery liquid slags of silicon manganese and to develop effective structural materials that can replace metals, non-metallic building materials of natural origin, concretes, cast stone, plastics and refractories. Purpose. The study of the structure and properties of building materials and products from electric furnace slag of silicon manganese. Conclusion. Slags from the smelting of silicon manganese are classified as acidic. Their lime factor is in the range of 0.47–0.52. The composition of the slag located in the heterogeneous region SiO2 near the line of separation of cristobalite spread to the crystallization of wollastonite, according to the ternary system MnO-CaO-SiO2, which in consideration of their stability, allows the development of technology of building materials (gravel, sand, granulated slag, etc. and products (foundation blocks, road slabs, containers for transportation and storage of hazardous waste, and others.

Considerations for ceramic inlays in posterior teeth: a review

Science.gov (United States)

Hopp, Christa D; Land, Martin F

2013-01-01

This review of ceramic inlays in posterior teeth includes a review of the history of ceramic restorations, followed by common indications and contraindications for their use. A discussion on the potential for tooth wear is followed by a review of recommended preparation design considerations, fabrication methods, and material choices. Despite the improved materials available for fabrication of porcelain inlays, fracture remains a primary mode of inlay failure. Therefore, a brief discussion on strengthening methods for ceramics is included. The review concludes with a section on luting considerations, and offers the clinician specific recommendations for luting procedures. In conclusion, inlay success rates and longevity, as reported in the literature, are summarized. PMID:23750101

Statistics Online Computational Resource for Education

Science.gov (United States)

Dinov, Ivo D.; Christou, Nicolas

2009-01-01

The Statistics Online Computational Resource (http://www.SOCR.ucla.edu) provides one of the largest collections of free Internet-based resources for probability and statistics education. SOCR develops, validates and disseminates two core types of materials--instructional resources and computational libraries. (Contains 2 figures.)

Stochastic dynamic programming model for optimal resource ...

Indian Academy of Sciences (India)

M Bhuvaneswari

2018-04-11

Apr 11, 2018 ... handover in VANET; because of high dynamics in net- work topology, collaboration ... containers, doctors, nurses, cash and stocks. Similarly, ... GTBA does not take the resource types and availability into consideration.

Considerations concerning the secure transport of radioactive materials in Romania

International Nuclear Information System (INIS)

Vieru, Gheorghe

2002-01-01

As UNO member and founding member of the IAEA, Romania has implemented national regulations concerning the transport of radioactive materials in complete safety, complying with recommendations by IAEA and other international organizations. Accordingly, the National Commission for Nuclear Activities Control, CNCAN, issued the Directive no. 374/October 2001 which provides the rules for secure radioactive material transport in Romania on roads, rail ways, sea/fluvial and air ways. The paper presents the main sources of producing radioactive materials focussing the following: mining of natural uranium ore, nuclear fuel fabrication plants, nuclear power plants operation, nuclear research reactors, industrial use of radioactive sources (as gamma radiography), use of radioisotope in scientific, educational or medical units. The paper pays attention to the special routes and containers adopted for most secure transport of radioactive waste. Finally, one presents specific issues relating to identification and evaluation of the risk factors occurring at the transport of radioactive waste, as well as the potential radiological consequences upon population and environment. Estimated are the collective risk doses for different categories of populations from areas adjacent to the routes of radioactive materials transportation. It is stressed that the annual collective dose which the population is exposed to in case of accident is comparable with the dose from the natural (cosmic radiation background)

Materials for generation-IV nuclear reactors

International Nuclear Information System (INIS)

Alvarez, M. G.

2009-01-01

Materials science and materials development are key issues for the implementation of innovative reactor systems such as those defined in the framework of the Generation IV. Six systems have been selected for Generation IV consideration: gas-cooled fast reactor, lead-cooled fast reactor, molten salt-cooled reactor, sodium-cooled fast reactor, supercritical water-cooled reactor, and very high temperature reactor. The structural materials need to resist much higher temperatures, higher neutron doses and extremely corrosive environment, which are beyond the experience of the current nuclear power plants. For this reason, the first consideration in the development of Generation-IV concepts is selection and deployment of materials that operate successfully in the aggressive operating environments expected in the Gen-IV concepts. This paper summarizes the Gen-IV operating environments and describes the various candidate materials under consideration for use in different structural applications. (author)

The cellulose resource matrix.

Science.gov (United States)

Keijsers, Edwin R P; Yılmaz, Gülden; van Dam, Jan E G

2013-03-01

The emerging biobased economy is causing shifts from mineral fossil oil based resources towards renewable resources. Because of market mechanisms, current and new industries utilising renewable commodities, will attempt to secure their supply of resources. Cellulose is among these commodities, where large scale competition can be expected and already is observed for the traditional industries such as the paper industry. Cellulose and lignocellulosic raw materials (like wood and non-wood fibre crops) are being utilised in many industrial sectors. Due to the initiated transition towards biobased economy, these raw materials are intensively investigated also for new applications such as 2nd generation biofuels and 'green' chemicals and materials production (Clark, 2007; Lange, 2007; Petrus & Noordermeer, 2006; Ragauskas et al., 2006; Regalbuto, 2009). As lignocellulosic raw materials are available in variable quantities and qualities, unnecessary competition can be avoided via the choice of suitable raw materials for a target application. For example, utilisation of cellulose as carbohydrate source for ethanol production (Kabir Kazi et al., 2010) avoids the discussed competition with easier digestible carbohydrates (sugars, starch) deprived from the food supply chain. Also for cellulose use as a biopolymer several different competing markets can be distinguished. It is clear that these applications and markets will be influenced by large volume shifts. The world will have to reckon with the increase of competition and feedstock shortage (land use/biodiversity) (van Dam, de Klerk-Engels, Struik, & Rabbinge, 2005). It is of interest - in the context of sustainable development of the bioeconomy - to categorize the already available and emerging lignocellulosic resources in a matrix structure. When composing such "cellulose resource matrix" attention should be given to the quality aspects as well as to the available quantities and practical possibilities of processing the

Potential of Technogenic Mineral Raw Materials in Russia and the Issues of its Rational Use

Directory of Open Access Journals (Sweden)

Larisa Ivanovna Goncharova

2015-11-01

Full Text Available The increasing negative impact of mining waste on natural ecosystems often leads to their irreversible destruction, a trend that is gradually becoming global. The particular relevance of the research is explained, on the one hand, by the possibilities of minimization of specific volumes of formation of mining waste in all types of industries; on the other hand, by the possibilities of maximization of comp rehensive use of their valuable components as secondary material resources on an economically rational basis and the possibilities of restoring the disturbed natural environment. The rational use of natural and technogenic mineral raw materials is greatly facilitated by the geological exploration and geological-economic evaluation of the resources, which requires the development of specific methodological approaches to the economic justification of resource estimation parameters for outlining and calculating the multicomponent commercial reserves of raw materials and separate valuable components in them. Analysis shows that researchers’ opinions on a number of methodological principles of sustainable mining, complex processing of multicomponent materials are often contradictory. Scientific publications do not consider the issue of the price valuation of mining waste as secondary material resources. Mining waste processing should be considered as an important part of the overall socio-ecological-economic system for rational nature management. The analysis of the existing practice of using the mining waste should be based on the system approach and take into consideration geological, technological, economic, environmental and social characteristics throughout the cycle of production, combined processing and treatment of secondary waste according to the principle “from the earth to the earth”. The article identifies the main barriers to the recycling of mining wastes, proposes several methodological guidelines for the sustainable mining and

Design of lightweight multi-material automotive bodies using new material performance indices of thin-walled beams for the material selection with crashworthiness consideration

International Nuclear Information System (INIS)

Cui, Xintao; Zhang, Hongwei; Wang, Shuxin; Zhang, Lianhong; Ko, Jeonghan

2011-01-01

Currently, automotive bodies are constructed usually using a single material, e.g. steel or aluminum. Compared to single-material automotive bodies, multi-material automotive bodies allow optimal material selection in each structural component for higher product performance and lower cost. This paper presents novel material performance indices and procedures developed to guide systematic material selection for multi-material automotive bodies. These new indices enable to characterize the crashworthiness performance of complex-shaped thin-walled beams in multi-material automotive bodies according to material types. This paper also illustrates the application of these performance indices and procedures by designing a lightweight multi-material automotive body. These procedures will help to design a lightweight and affordable body favored by the automotive industry, thus to reduce fuel consumption and greenhouse gas emissions.

Materials design considerations and selection for a large rad waste incinerator

International Nuclear Information System (INIS)

Vormelker, P.R.; Jenkins, C.F.; Burns, H.H.

1997-01-01

A new incinerator has been built to process self-generated, low level radioactive wastes at the Department of Energy's Savannah River Site. Wastes include protective clothing and other solid materials used during the handling of radioactive materials, and liquid chemical wastes resulting from chemical and waste management operations. The basic design and materials of construction selected to solve the anticipated corrosion problems from hot acidic gases are reviewed. Problems surfacing during trial runs prior to radioactive operations are discussed

Participatory GIS for resource management in Africa: Taking stock ...

International Development Research Centre (IDRC) Digital Library (Canada)

Participatory GIS for resource management in Africa: Taking stock. 25 avril 2016 ... Spatial decision-support tools hold considerable potential to contribute to sustainable resource management. By improving access to information ... Nombre d'entre nous qui résidons dans l'est du Canada avons l'impression qu'il n'y a pas eu.

Analysis of Pedagogic Potential of Electronic Educational Resources with Elements of Autodidactics

Directory of Open Access Journals (Sweden)

Igor A.

2018-03-01

Full Text Available Introduction: in recent years didactic properties of electronic educational resources undergo considerable changes, nevertheless, the question of studying of such complete phenomenon as “an electronic educational resource with autodidactics elements” remains open, despite sufficient scientific base of researches of the terms making this concept. Article purpose – determination of essence of electronic educational resources with autodidactics elements. Materials and Methods: the main method of research was the theoretical analysis of the pedagogical and psychological literature on the problem under study. We used the theoretical (analysis, synthesis, comparison and generalization methods, the method of interpretation, pedagogical modeling, and empirical methods (observation, testing, conversation, interview, analysis of students’ performance, pedagogical experiment, peer review. Results: we detected the advantages of electronic educational resources in comparison with traditional ones. The concept of autodidactics as applied to the subject of research is considered. Properties of electronic educational resources with a linear and nonlinear principle of construction are studied.The influence of the principle of construction on the development of the learners’ qualities is shown. We formulated an integral definition of electronic educational resources with elements of autodidactics, namely, the variability, adaptivity and cyclicity of training. A model of the teaching-learning process with electronic educational resources is developed. Discussion and Conclusions: further development of a problem will allow to define whether electronic educational resources with autodidactics elements pedagogical potential for realization of educational and self-educational activity of teachers have, to modify technological procedures taking into account age features of students, their specialties and features of the organization of process of training of

Polymetallic nodule resources of the Indian Ocean

Digital Repository Service at National Institute of Oceanography (India)

Nair, R.R.; Jauhari, P.

The seabed resources are large and varied and considerable knowledge and technological development are required to exploit them economically. Beyond the Exclusive Economic Zone (EEZ), the deposits which are of utmost interest are the polymetallic...

Integrated resource planning-concepts and principles

Energy Technology Data Exchange (ETDEWEB)

Atkinson, S.

1994-12-31

The concepts and principles of integrated resource planning (IRP) are outlined. The following topics are discussed: utility opportunities and methodologies, application considerations, ambitious energy-efficient programs, the future of IRP, three methods to study resource alternatives, the load adjustment method, simultaneous optimization, static analysis, utility profile data, load forecasts and shapes, load data, conversion, variable costs, external analysis, internal analysis, DSM objectives, supply-side prescreening, DSM screening analysis, DSM evaluation, the IRP process, risk analysis, collaborative planning process, and load shape objectives.

Mexico Wind Resource Assessment Project

Energy Technology Data Exchange (ETDEWEB)

Schwartz, M.N.; Elliott, D.L.

1995-05-01

A preliminary wind energy resource assessment of Mexico that produced wind resource maps for both utility-scale and rural applications was undertaken as part of the Mexico-U.S. Renewable Energy Cooperation Program. This activity has provided valuable information needed to facilitate the commercialization of small wind turbines and windfarms in Mexico and to lay the groundwork for subsequent wind resource activities. A surface meteorological data set of hourly data in digital form was utilized to prepare a more detailed and accurate wind resource assessment of Mexico than otherwise would have been possible. Software was developed to perform the first ever detailed analysis of the wind characteristics data for over 150 stations in Mexico. The hourly data set was augmented with information from weather balloons (upper-air data), ship wind data from coastal areas, and summarized wind data from sources in Mexico. The various data were carefully evaluated for their usefulness in preparing the wind resource assessment. The preliminary assessment has identified many areas of good-to-excellent wind resource potential and shows that the wind resource in Mexico is considerably greater than shown in previous surveys.

Determinants of Critical Infrastructure Resources

Directory of Open Access Journals (Sweden)

Ostrowska Teresa

2017-12-01

Full Text Available This article is devoted to the issue of how resources are interpreted in the form of technology reactors that, as a result of unexpected circumstances, turn into pyramidal or avalanche threat dynamics. Counteracting such catastrophic, terrorist, or war situations cannot begin in the face of mass casualties or significant material losses that will require reconstruction and the work of many generations. The decisive factor is the correct long-term operation and management of the economy. The starting point of this article is the concept of resource and structural-functional relationships of resources and all their possible interpretations consistent with the functionalities they play in the human environment, human aggregates, and whole nations. The aim is to draw the reader's attention to the importance (semiotics of qualitative specifications and dynamically changing determinants contained in the material and structural-functional properties of the resources and their channel (information communication.

Practical Considerations of Design, Fabrication and Tests for Composite Materials,

Science.gov (United States)

1982-09-01

Harris 2 School of Materials Science University of Bath Claverton Down Bath AB2 7AY UK 1. THE IDEA OF A COMPOSITE The concept is a familiar one even to...A.R. Bunsell " Comportement en torsion des fibres de Kevlar-29 " Colloque nt CNRS No. 319 Comportement plastique des solides anisotropes. 16-19 June...d’hhlicoptares en composites : conception , rdalisation et comportement en operation ". Advances in Composite Materials Vol II Ed. A.R. Bunsell, C. Bathias

Analysis of the Economic Impact of Large-Scale Deployment of Biomass Resources for Energy and Materials in the Netherlands. Appendix 2. Macro-economic Scenarios

International Nuclear Information System (INIS)

Banse, M.

2009-03-01

The Bio-based Raw Materials Platform (known as PGG), which is part of the Energy Transition programme in the Netherlands, commissioned the Agricultural Economics Research Institute (LEI) and the Copernicus Institute of Utrecht University to study the macro-economic impact of large-scale deployment of biomass for energy and materials in the Netherlands. Two model approaches were applied based on a consistent set of scenario assumptions: a bottom-up study including techno-economic projections of fossil and bio-based conversion technologies and a top-down study including macro-economic modelling of (global) trade of biomass and fossil resources. The results of the top-down study (part 2) including macro-economic modelling of (global) trade of biomass and fossil resources, are presented in this report

Task force on resource development and the economy

International Nuclear Information System (INIS)

Mansell, R.L.; Staples, L.B.

2011-02-01

In Alberta, the development and growth of the economy relies heavily on the resource sectors, which drive half of all employment. In 2009, the Alberta Chamber of Resources commissioned a task force, comprising groups from the 9 resource sectors in Alberta, to examine resource development and the economy. The aim of this team was to present the impact that the resource sectors had on Alberta's economy in the past, the impact it could have in the future, and to make recommendations on how to meet the full potential of resource development in the province. This reports states that considerable resources of bitumen and coal are present in Alberta and that forestry and diamonds could also play important roles in future resource development. The task force believes that the resource sectors will continue lead gross domestic product growth in Alberta and 16 recommendations for meeting the province's full potential are provided.

Substitute energy resource policy in Japan

International Nuclear Information System (INIS)

Umehara, Katsuhiko

1980-01-01

Japan depends 88% of energy resources and 99.8% of petroleum on imports. The solution of energy problems is now made internationally. As the means for Japan, there are the substitution of other resources for petroleum and its promotion. However, this involves the considerable funds for the development and utilization, which must be borne by the people in the form of tax. For governmental financing, a special account must be set up for the particular purpose. In the research and development of new energy resources, new institution is required. The following matters are described: petroleum shortage coming even in 1980s, the international need of substitute energy development, the need for establishing measures for substitute energy resources, acquisition of the funds, special-account governmental financing, and an institute of new energy development. (author)

Geophysical considerations of geothermics

Energy Technology Data Exchange (ETDEWEB)

Hayakawa, M

1967-01-01

The development and utilization of geothermal energy is described from the standpoint of geophysics. The internal temperature of the Earth and the history and composition of magmas are described. Methods of exploration such as gravity, magnetic, thermal and electrical surveys are discussed, as are geochemical and infrared photogrammetric techniques. Examples are provided of how these techniques have been used in Italy and at the Matsukawa geothermal field in Japan. Drilling considerations such as muds, casings and cementing materials are discussed. Solutions are proposed for problems of environmental pollution and plant expansion.

Resource recovery from residual household waste: An application of exergy flow analysis and exergetic life cycle assessment.

Science.gov (United States)

Laner, David; Rechberger, Helmut; De Soete, Wouter; De Meester, Steven; Astrup, Thomas F

2015-12-01

Exergy is based on the Second Law of thermodynamics and can be used to express physical and chemical potential and provides a unified measure for resource accounting. In this study, exergy analysis was applied to four residual household waste management scenarios with focus on the achieved resource recovery efficiencies. The calculated exergy efficiencies were used to compare the scenarios and to evaluate the applicability of exergy-based measures for expressing resource quality and for optimizing resource recovery. Exergy efficiencies were determined based on two approaches: (i) exergy flow analysis of the waste treatment system under investigation and (ii) exergetic life cycle assessment (LCA) using the Cumulative Exergy Extraction from the Natural Environment (CEENE) as a method for resource accounting. Scenario efficiencies of around 17-27% were found based on the exergy flow analysis (higher efficiencies were associated with high levels of material recycling), while the scenario efficiencies based on the exergetic LCA lay in a narrow range around 14%. Metal recovery was beneficial in both types of analyses, but had more influence on the overall efficiency in the exergetic LCA approach, as avoided burdens associated with primary metal production were much more important than the exergy content of the recovered metals. On the other hand, plastic recovery was highly beneficial in the exergy flow analysis, but rather insignificant in exergetic LCA. The two approaches thereby offered different quantitative results as well as conclusions regarding material recovery. With respect to resource quality, the main challenge for the exergy flow analysis is the use of exergy content and exergy losses as a proxy for resource quality and resource losses, as exergy content is not per se correlated with the functionality of a material. In addition, the definition of appropriate waste system boundaries is critical for the exergy efficiencies derived from the flow analysis, as it

Uranium resource assessments

International Nuclear Information System (INIS)

1981-01-01

The objective of this investigation is to examine what is generally known about uranium resources, what is subject to conjecture, how well do the explorers themselves understand the occurrence of uranium, and who are the various participants in the exploration process. From this we hope to reach a better understanding of the quality of uranium resource estimates as well as the nature of the exploration process. The underlying questions will remain unanswered. But given an inability to estimate precisely our uranium resources, how much do we really need to know. To answer this latter question, the various Department of Energy needs for uranium resource estimates are examined. This allows consideration of whether or not given the absence of more complete long-term supply data and the associated problems of uranium deliverability for the electric utility industry, we are now threatened with nuclear power plants eventually standing idle due to an unanticipated lack of fuel for their reactors. Obviously this is of some consequence to the government and energy consuming public. The report is organized into four parts. Section I evaluates the uranium resource data base and the various methodologies of resource assessment. Part II describes the manner in which a private company goes about exploring for uranium and the nature of its internal need for resource information. Part III examines the structure of the industry for the purpose of determining the character of the industry with respect to resource development. Part IV arrives at conclusions about the emerging pattern of industrial behavior with respect to uranium supply and the implications this has for coping with national energy issues

Vulnerability Analysis Considerations for the Transportation of Special Nuclear Material

International Nuclear Information System (INIS)

Nicholson, Lary G.; Purvis, James W.

1999-01-01

The vulnerability analysis methodology developed for fixed nuclear material sites has proven to be extremely effective in assessing associated transportation issues. The basic methods and techniques used are directly applicable to conducting a transportation vulnerability analysis. The purpose of this paper is to illustrate that the same physical protection elements (detection, delay, and response) are present, although the response force plays a dominant role in preventing the theft or sabotage of material. Transportation systems are continuously exposed to the general public whereas the fixed site location by its very nature restricts general public access

R'07 World Congress - Recovery of materials and energy for resource efficiency

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

This final congress report summarises the topics dealt with at the R'07 World Congress on the recovery of materials and energy for resource efficiency. The congress was held in 2007 in Davos, Switzerland. Details on the organisation and participants are given and the experts who held plenary lectures are listed. Brief details are given on oral and poster sessions, along with details on how the proceedings of the congress can be obtained. Workshops held at the conference covered the following topics: Plastics recycling, biofuels and E-waste, workshops on zero wastes, scarce metals and the identification and management of social implications over the product life cycle (footprint). An Internet-address where the results of the sessions can be obtained is given along with a summary of excursions and social events held within the framework of the congress. Finally, participant feedback is presented in graphical form.

URANIUM 1991 resources, production and demand

International Nuclear Information System (INIS)

1992-01-01

The uranium supply aspects of the nuclear fuel cycle have undergone considerable change during the last few years. Nuclear power generating capacity can continue to expand only if there is confidence in the final supply of uranium. This report presents governmental compilations of uranium resource and production data, as established in 1991. It also presents short-term projections of the nuclear industry future natural uranium requirements and reviews the status of uranium exploration, resources and production throughout the world. 10 refs., 14 figs., 15 tabs., 6 appendices

Issues about Human Resources Recruitment

Directory of Open Access Journals (Sweden)

Aurel Manolescu

2008-04-01

Full Text Available As to ensure its success or even for surviving, organizations must settle accordingly some issues regarding the human resources enlistment, presented in great details within the article, whose success settlement ensure, concomitantly, the success of the entire assurance process with personnel, process extremely important, if there are taken into consideration, especially, the effects of some possible errors or hire errors. Therefore, the human resources recruitment tends to become a complex and expensive activity and, concomitantly, an independent activity, sustained both through the necessary work volume as well as through its importance for the organization.

Innovation, resources and economic growth

International Nuclear Information System (INIS)

Curzio, A.Q.; Fortis, M.; Zoboli, R.

1994-01-01

The book is concerned with the following items: 1. Technological Creativity and Institutions, 2. Innovation at Work in an Historical-Economic Perspective: Energy and Industrial Materials, 3. Scientific Revolutions and Strategies of Economic Supremacy: Advanced Materials and Biotechnologies, 4. Economic Growth and Agro-Food Policies in Key Problem Regions: Former USSR and LDCs, 5. Economic Growth and Natural Resources at Risk: Climate Change, Forests and Water and in Conclusion: Innovation and Resources in a Global Policy Perspective. Only one chapter have regard to energy problems: Energie efficient technologies: past and future perspectives. (UA)

Considerations on the selection and prioritization of information security solutions

Directory of Open Access Journals (Sweden)

Maria Cristina RĂDULESCU

2016-05-01

Full Text Available This paper provides a set of guidelines that can be used for prescribing a methodology or a detailed process for selecting and prioritizing security projects or solutions. It is based on the idea that costs of security solutions should be justified by their contribution to ensuring adequate protection of information resources in the organization which implements them. The article reviews general issues of security risks and costs, arguing the need for explicit consideration of information resources security requirements in order to validate decisions concerning security projects implementation. In such an approach, security requirements of information resources are used as a reference system to quantify the benefits and limitations of security solutions defined as alternative or complementary responses to certain security risks as their implementation faces budget constraints.

Use of blog as a supplementary study material resource in dentistry: An Indian experience

Directory of Open Access Journals (Sweden)

Thavarajah Rooban

2014-01-01

Full Text Available Objective: Social networking sites (SNS are emerging as an alternate teaching resource. The reach and access characteristics of SNS for a noninstitutional, academic blog in an Indian setting has not been documented and this manuscript aim to address this lacunae. Materials and Methods: A blog for oral histology, an integral basic dental subject and its Facebook promotional page was created. The access characteristics were observed using Google analytics. The Facebook promotional pages of the blog access characteristics are presented. Results: A total of 582 people visited the blog during the study period. Majority of them used Google Chrome from desktop/laptop to access the blog. There were 2723 page visits in all. Visitors from 36 countries and 99 cities across the globe accessed the blog. In all through Facebook, the promotional page reached 36,543 people. The total number of people engaged through Facebook promotion page was 10,757. Conclusion: Access characteristics of the noninstitutional, academic blog have been described for the first time in dentistry. The lessons learnt through this exercise would be helpful in designing e-mentoring courses as well promotional pages of such events in the future. The necessity of making the mentors and students to adapt to e-learning and digital learning resources before drawing such programs is highlighted.

Source Materials for the Healthy Communities Toolkit: A Resource Guide for Community and Faith-Based Organizations.

Science.gov (United States)

Acosta, Joie; Chandra, Anita; Williams, Malcolm; Davis, Lois M

2011-01-01

The Patient Protection and Affordable Care Act places significant emphasis on the role of community-based health promotion initiatives; within this focus, community and faith-based organizations (CFBOs) are seen as critical partners for improving community well-being. This article describes a report that provides the content for a toolkit that will prepare community and faith-based organizations to take advantage of opportunities presented in the Patient Protection and Affordable Care Act and engage faith and community leaders in promoting health in their communities. This includes key facts and figures about health topics, handouts for community groups, and web links for resources and other information in the following areas: healthcare reform; community health centers and development of the community health workforce; promotion of healthy families; mental health; violence and trauma; prevention of teen and unintended pregnancy and HIV/AIDS; and chronic disease prevention. The report also includes recommendations for testing the content of the toolkit with communities and considerations for its implementation.

Increased component safety through improved methods for residual stress analysis. Subprojects. Consideration of the elastic-plastic material properties (phase 1). Final report

International Nuclear Information System (INIS)

Mirbach, David von

2014-01-01

Residual stresses in mechanical components can result in both detrimental but also beneficial effects on the strength and lifetime of the components. The most detailed knowledge of the residual stress state is of advantage or a pre-requisite for the assessment of the component performance. The mechanical methods for residual stress measurement are divided into the groups of non-destructive and destructive methods. Two commonly used mechanical methods for determination of residual stresses are the hole drilling method and the ring core method which can be regarded as semi-destructive methods. In the context of reactor safety research of the German Federal Ministry of Economic and Technology (BMWi) two fundamental and interacting weak points of the hole drilling method as well as of the ring core method, respectively, in order to determine residual stresses are going to be investigated. As a consequence reliability of the methods will be improved in this joint research project. On the one hand there are effects of geometrical boundary conditions of the components and on the other hand there is the influence of plasticity due to notch effects both affecting the released strain field after removing material and after all the calculated residual stresses. The first issue mentioned above is under the responsibility of the Institute of Materials Engineering (Kassel University) and the last one is investigated by Universitaet of Stuttgart-Otto-Graf-Institut - materials testing institute. As a consequence of a successful project the knowledge base will be considerably improved resulting in benefits for various engineering fields. Especially the quantitative consideration of real residual stress states for optimized component designs will be possible and after all the consequences of residual stresses on safety of components which are used in nuclear facilities can be evaluated. The state of art was reground in the first research chapter and the analysed strain gauges where

Russia at the beginning of 3rd millenium. Geopolitical resources and options

Directory of Open Access Journals (Sweden)

Adrian Botezatu

2012-07-01

Full Text Available The authors present and analyze demographic and economic resources of Russia and also its geopolitical options, favored by the control of these resources. Geopolithically, nowadays Russia has great difficulties when it comes to demography, because of the decrease of birth rate, to the poor demographic density, low life expectancy and its population’s precarious general health state. All the same, nowadays Russia is the richest country in the world. Based on these considerations, the authors consider that Rusia could become a true super-power (according to Zbigniew Brzezinski’s considerations only if it will solve its demographical problems and will build a Western-style army and economy, based on its huge economic resources.

Cryogenic Considerations for Superconducting Magnet Design for the Material Plasma Exposure eXperiment

Energy Technology Data Exchange (ETDEWEB)

Duckworth, Robert C [ORNL; Demko, Dr. Jonathan A [LeTourneau University, Texas; Lumsdaine, Arnold [ORNL; Caughman, John B [ORNL; Goulding, Richard Howell [ORNL; McGinnis, William Dean [ORNL; Bjorholm, Thomas P [ORNL; Rapp, Juergen [ORNL

2015-01-01

In order to determine long term performance of plasma facing components such as diverters and first walls for fusion devices, next generation plasma generators are needed. A Material Plasma Exposure eXperiment (MPEX) has been proposed to address this need through the generation of plasmas in front of the target with electron temperatures of 1-15 eV and electron densities of 1020 to 1021 m-3. Heat fluxes on target diverters could reach 20 MW/m2. In order generate this plasma, a unique radio frequency helicon source and heating of electrons and ions through Electron Bernstein Wave (EBW) and Ion Cyclotron Resonance Heating (ICRH) has been proposed. MPEX requires a series of magnets with non-uniform central fields up to 2 T over a 5m length in the heating and transport region and 1 T uniform central field over a 1-m length on a diameter of 1.3 m. Given the field requirements, superconducting magnets are under consideration for MPEX. In order to determine the best construction method for the magnets, the cryogenic refrigeration has been analyzed with respect to cooldown and operational performance criteria for open-cycle and closed-cycle systems, capital and operating costs of these system, and maturity of supporting technology such as cryocoolers. These systems will be compared within the context of commercially available magnet constructions to determine the most economical method for MPEX operation. The current state of the MPEX magnet design including details on possible superconducting magnet configurations will be presented.

Children's decision making: When self-interest and moral considerations conflict.

Science.gov (United States)

Tasimi, Arber; Johnson, Marcia K; Wynn, Karen

2017-09-01

When children's self-interests are at odds with their moral considerations, what do they do? In the current study of 5- and 6-year-olds (N=160), we asked (a) whether children would select the offering of a do-gooder over a neutral individual at a personal cost, (b) whether they would reject the offering of a wrongdoer over a neutral individual at a personal cost, and (c) whether these two types of decisions involve comparable levels of conflict. In the absence of material considerations, children preferred a nice character to a neutral one, but this preference was easily overcome for material gain; children accepted a larger offering from a neutral source over a smaller offering from a nice source. In contrast, children's aversion to negative characters was largely unaffected by the same material consideration; they rejected a larger offering from a mean source in favor of a smaller offering from a neutral source. In addition, children's response times indicated that deciding whether or not to "sell out" to a wrongdoer for personal gain engenders conflict but that deciding whether to take a lesser gain from a do-gooder does not. These findings indicate that children weigh both their own material interests and others' social behaviors when selecting social partners and, importantly, that an aversion to wrongdoers is a more powerful influence on these choices than an attraction to do-gooders. Copyright © 2017 Elsevier Inc. All rights reserved.

Potentials for Improvement of Resource Efficiency in Printed Circuit Board Manufacturing: A Case Study Based on Material Flow Cost Accounting

Directory of Open Access Journals (Sweden)

Yi-Xuan Wang

2017-05-01

Full Text Available The pursuit of sustainable resource use by manufacturing companies is driven by resource scarcity, environmental awareness, and cost savings potentials. To address these issues, Material Flow Cost Accounting (MFCA has been developed and applied as an effective environmental management tool. Within MFCA’s general allocation, the accounts of products and losses are overrated by weight or volume. However, such a method is incompatible with Printed Circuit Board (PCB manufacturing because of industry characteristics in which primary inputs and products are measured by area. Based on MFCA, this case study systematically established several linear cost calculation models along the production process for capturing the actual waste flows as well as performing cost-benefit analysis. The recognition of previously ignored losses offered the incentive to find appropriate indicators to conduct cost-benefit analysis on hotspots for losses. Loss identification and analysis indicated that machining and wiring are the necessities and priorities of process optimization for resource efficiency improvement measures. Therefore, this research could not only advance the achievement of a profitable and sustainable production while improving resource efficiency at the source but could also provide support for decision making in PCB manufacturing.

ECONOMICS OF HUMAN RESOURCES

Directory of Open Access Journals (Sweden)

IOANA - JULIETA JOSAN

2011-04-01

Full Text Available The purpose of this paper is to analyze human resources in terms of quantitative and qualitative side with special focus on the human capital accumulation influence. The paper examines the human resources trough human capital accumulation in terms of modern theory of human resources, educational capital, health, unemployment and migration. The findings presented in this work are based on theoretical economy publications and data collected from research materials. Sources of information include: documents from organizations - the EUROSTAT, INSSE - studies from publications, books, periodicals, and the Internet. The paper describes and analyzes human resources characteristics, human resource capacities, social and economic benefits of human capital accumulation based on economy, and the government plans and policies on health, education and labor market.

Manufacturing considerations for AMLCD cockpit displays

Science.gov (United States)

Luo, Fang-Chen

1995-06-01

AMLCD cockpit displays need to meet more stringent requirements compared with AMLCD commercial displays in areas such as environmental conditions, optical performance and device reliability. Special considerations are required for the manufacturing of AMLCD cockpit displays in each process step to address these issues. Some examples are: UV stable polarizers, wide-temperature LC material, strong LC glue seal, ESS test system, gray scale voltage EEPROM, etc.

Organic petrology of subbituminous carbonaceous shale samples from Chalaw, Kabul Province, Afghanistan: Considerations for paleoenvironment and energy resource potential

Energy Technology Data Exchange (ETDEWEB)

Hackley, Paul C.; SanFilipo, John R. [U.S. Geological Survey, MS 956 National Center, Reston VA, 20192 (United States); Azizi, Gul Pacha [Afghanistan Geological Survey, Macroryan Square, Kabul (Afghanistan); Davis, Philip A. [U.S. Geological Survey, 520 N. Park Avenue, Tucson AZ, 85719 (United States); Starratt, Scott W. [U.S. Geological Survey, MS 910, 345 Middlefield Rd, Menlo Park CA, 94025 (United States)

2010-04-01

Neogene (?) subbituminous carbonaceous shale deposits from Chalaw, Afghanistan, were investigated through organic petrology techniques and standard coal analyses to determine paleoenvironment and potential for resource utilization. The Chalaw deposit, approximately 30 km southeast of Kabul, currently is exploited for brick making and domestic heating and cooking. Three multiple-bench channel samples of the mined bed at Chalaw were collected and evaluated. The presence of significant huminite (ranging from 0.2 to 59.0 vol.%, mineral-inclusive basis) is suggestive of a terrestrial lignin-rich precursor plant material. Measured reflectance values of 0.38-0.55% indicate subbituminous rank. This rank suggests burial depths of approximately 1500 m and maximum temperatures of approximately 50 C. Structured liptinite macerals generally are absent except for some fluorescing morphologies interpreted to be poorly-preserved root cork suberinite. Sponge spicule bioliths including gemmoscleres and megascleres are common. These petrographic observations, in addition to high mineral matter content (33 to > 95 vol.%), medium to high sulfur content (2.1-11.5 wt.%, dry basis; db), and the presence of common gastropod? shell fragments and an aragonite-needle chalk bed are consistent with, but not directly indicative of, a marginal marine or estuarine mangrove depositional environment. However, additional data are necessary to confirm this hypothesis and deposition in a freshwater environment cannot be ruled out at this time. Commercial-scale development and utilization of the Chalaw deposit as a thermal fuel resource may be possible using a fluidized bed combustion system which could accept the low-quality mine product currently produced. Samples examined herein contain high-ash yield (45-90 wt.%, db), high total moisture content (17-39 wt.%), low calorific value (980-6860 Btu/lb, m,mmf), and have poor agglomerating properties (FSI = 0), consistent with fuels utilized in fluidized

AGI's Earth Science Week and Education Resources Network: Connecting Teachers to Geoscience Organizations and Classroom Resources that Support NGSS Implementation

Science.gov (United States)

Robeck, E.; Camphire, G.; Brendan, S.; Celia, T.

2016-12-01

There exists a wide array of high quality resources to support K-12 teaching and motivate student interest in the geosciences. Yet, connecting teachers to those resources can be a challenge. Teachers working to implement the NGSS can benefit from accessing the wide range of existing geoscience resources, and from becoming part of supportive networks of geoscience educators, researchers, and advocates. Engaging teachers in such networks can be facilitated by providing them with information about organizations, resources, and opportunities. The American Geoscience Institute (AGI) has developed two key resources that have great value in supporting NGSS implement in these ways. Those are Earth Science Week, and the Education Resources Network in AGI's Center for Geoscience and Society. For almost twenty years, Earth Science Week, has been AGI's premier annual outreach program designed to celebrate the geosciences. Through its extensive web-based resources, as well as the physical kits of posters, DVDs, calendars and other printed materials, Earth Science Week offers an array of resources and opportunities to connect with the education-focused work of important geoscience organizations such as NASA, the National Park Service, HHMI, esri, and many others. Recently, AGI has initiated a process of tagging these and other resources to NGSS so as to facilitate their use as teachers develop their instruction. Organizing Earth Science Week around themes that are compatible with topics within NGSS contributes to the overall coherence of the diverse array of materials, while also suggesting potential foci for investigations and instructional units. More recently, AGI has launched its Center for Geoscience and Society, which is designed to engage the widest range of audiences in building geoscience awareness. As part of the Center's work, it has launched the Education Resources Network (ERN), which is an extensive searchable database of all manner of resources for geoscience

Materials Analysis and Modeling of Underfill Materials.

Energy Technology Data Exchange (ETDEWEB)

Wyatt, Nicholas B [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Chambers, Robert S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-08-01

The thermal-mechanical properties of three potential underfill candidate materials for PBGA applications are characterized and reported. Two of the materials are a formulations developed at Sandia for underfill applications while the third is a commercial product that utilizes a snap-cure chemistry to drastically reduce cure time. Viscoelastic models were calibrated and fit using the property data collected for one of the Sandia formulated materials. Along with the thermal-mechanical analyses performed, a series of simple bi-material strip tests were conducted to comparatively analyze the relative effects of cure and thermal shrinkage amongst the materials under consideration. Finally, current knowledge gaps as well as questions arising from the present study are identified and a path forward presented.

Information resources for nuclear power construction

International Nuclear Information System (INIS)

Rozin, V.M.

1987-01-01

Problems of designing and introduction of data resources (in the form of magnetic carrier data) for the construction of NPP with the WWER-1000 type reactors are considered. It is suggested that the data resources should be supplied to the construction as independent production alongside with preliminary estimation and material resources. It is pointed out that the introduction of the data resource will permit to increase the efficiency of NPP construction management

Application of natural resource valuation concepts for development of sustainable remediation plans for groundwater.

Science.gov (United States)

Connor, John A; Paquette, Shawn; McHugh, Thomas; Gie, Elaine; Hemingway, Mark; Bianchi, Gino

2017-12-15

This paper explores the application of natural resource assessment and valuation procedures as a tool for developing groundwater remediation strategies that achieve the objectives for health and environmental protection, in balance with considerations of economic viability and conservation of natural resources. The natural resource assessment process, as applied under U.S. and international guidelines, entails characterization of groundwater contamination in terms of the pre-existing beneficial services of the impacted resource, the loss of these services caused by the contamination, and the measures and associated costs necessary to restore or replace the lost services. Under many regulatory programs, groundwater remediation objectives assume that the impacted groundwater may be used as a primary source of drinking water in the future, even if not presently in use. In combination with a regulatory preference for removal or treatment technologies, this assumed exposure, while protective of human health, can drive the remedy selection process toward remedies that may not be protective of the groundwater resource itself or of the other natural resources (energy, materials, chemicals, etc.) that may be consumed in the remediation effort. To achieve the same health and environmental protection goals under a sustainable remediation framework, natural resource assessment methods can be applied to restore the lost services and preserve the intact services of the groundwater so as to protect both current and future users of that resource. In this paper, we provide practical guidelines for use of natural resource assessment procedures in the remedy selection process and present a case study demonstrating the use of these protocols for development of sustainable remediation strategies. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Resources for our Future. Key issues and best practices in resource efficiency

Energy Technology Data Exchange (ETDEWEB)

Weterings, R.; Bastein, T.; Tukker, A. [TNO, Delft (Netherlands); Rademaker, M.; De Ridder, M. [The Hague Centre for Strategic studies HCSS, Den Haag (Netherlands)

2013-08-15

This book provides an analysis of the issues surrounding international resources and inspiring accounts of industrial best practices. The book consists of two distinct parts. The first part of the book brings together the results of years of research into the geopolitical, economic and ecological dimensions of material scarcity and resource efficiency. Chapter 2 discusses the main challenges and constraints related to the use of energy resources, water and land, industrial and metallic minerals, construction minerals and biotic resources, including water use and ecosystem degradation. The chapter also addresses important linkages between these various resources. Chapter 3 describes the international trends that are shaping the geopolitics of natural resources and looks at the implications for Europe and the Netherlands. Chapter 4 presents a wide range of strategies by which governments, producers and consumers may contribute to the more sustainable use of natural resources. The second part of the book describes 21 inspiring best practices in resource efficiency in a variety of industrial sectors. Based on a series of interviews with industrial pioneers, these chapters relate their first-hand experiences in improving resource efficiency. These business cases demonstrate that innovation and entrepreneurship can result in substantial improvements in resource efficiency. Chapter 5 focuses on best practices in the built environment, where substantial amounts of energy and minerals are used. Chapter 6 presents four ambitious strategies to promote sustainable food production and consumption. Chapter 7 describes recent developments in the chemical process industry, which produces most of the ingredients, compounds and semi-products for the vast range of products used by society. Chapter 8 provides four examples of the state-of-the-art in resource efficiency in the metal and high-tech industries. This chapter presents four business cases highlighting the benefits of the

30 CFR 56.15001 - First-aid materials.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false First-aid materials. 56.15001 Section 56.15001 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE....15001 First-aid materials. Adequate first-aid materials, including stretchers and blankets, shall be...

Uranium resource processing. Secondary resources

International Nuclear Information System (INIS)

Gupta, C.K.; Singh, H.

2003-01-01

This book concentrates on the processing of secondary sources for recovering uranium, a field which has gained in importance in recent years as it is environmental-friendly and economically in tune with the philosophy of sustainable development. Special mention is made of rock phosphate, copper and gold tailings, uranium scrap materials (both natural and enriched) and sea water. This volume includes related area of ore mineralogy, resource classification, processing principles involved in solubilization followed by separation and safety aspects

Design considerations for multi component molecular-polymeric nonlinear optical materials

Energy Technology Data Exchange (ETDEWEB)

Singer, K.D. (Case Western Reserve Univ., Cleveland, OH (USA). Dept. of Physics); Kuzyk, M.G. (Washington State Univ., Pullman, WA (USA). Dept. of Physics); Fang, T.; Holland, W.R. (AT and T Bell Labs., Princeton, NJ (USA)); Cahill, P.A. (Sandia National Labs., Albuquerque, NM (USA))

1990-01-01

We review our work on multi component polymeric nonlinear optical materials. These materials consist of nonlinear optical molecules incorporated in a polymeric host. A cross-linked triazine polymer incorporating a dicyanovinyl terminated azo dye was found to be relatively stable at 85{degree} and posses an electro-optic coefficient of 11pm/V. We have also observed the zero dispersion condition in a new anomalous dispersion dye for phase matched second harmonic generation, and expect efficient conversion to the blue. A squarylium dye, ISQ, has been found to posses a large third order nonlinearity, and may display two-level behavior. 24 refs., 11 figs.

Rubber-based carbon electrode materials derived from dumped tires for efficient sodium-ion storage.

Science.gov (United States)

Wu, Zhen-Yue; Ma, Chao; Bai, Yu-Lin; Liu, Yu-Si; Wang, Shi-Feng; Wei, Xiao; Wang, Kai-Xue; Chen, Jie-Sheng

2018-04-03

The development of sustainable and low cost electrode materials for sodium-ion batteries has attracted considerable attention. In this work, a carbon composite material decorated with in situ generated ZnS nanoparticles has been prepared via a simple pyrolysis of the rubber powder from dumped tires. Upon being used as an anode material for sodium-ion batteries, the carbon composite shows a high reversible capacity and rate capability. A capacity as high as 267 mA h g-1 is still retained after 100 cycles at a current density of 50 mA g-1. The well dispersed ZnS nanoparticles in carbon significantly enhance the electrochemical performance. The carbon composites derived from the rubber powder are proposed as promising electrode materials for low-cost, large-scale energy storage devices. This work provides a new and effective method for the reuse of dumped tires, contributing to the recycling of valuable waste resources.

Energy and other resources

International Nuclear Information System (INIS)

Rosenqvist, I.Th.

It is pointed out that inorganic mineral raw materials, usually called ores, do not form a separate geological class, with a strictly defined limit in quantity. The raw materials are in fact present in continuously variable concentrations and amounts with differing geographical distribution. It is only the richest occurrences which are regarded as resources and exploited. The cone concept of available material is presented, where the amount of material available increases as the work invested is increased, but the profitable ore is represented only by the apex of the cone. In applying this idea to fossil fuels the concept must be modified to a 'pear', since the energy invested in retrieving the fuel must not exceed the energy content of the fuel. Renewable energy sources are also discussed, and it is pointed out that geothermal energy should not be regarded as renewable. It is pointed out, too, that, unless breeder reactors are introduced, the fossil fuel resources will give more energy than uranium, and probably cheaper. (JIW)Ψ

Activation characteristics of candidate structural materials for a near-term Indian fusion reactor and the impact of their impurities on design considerations

Science.gov (United States)

H, L. SWAMI; C, DANANI; A, K. SHAW

2018-06-01

as the dose level, which has an impact on design considerations. IN-RAFMS was shown to be a more effective low-activation material than SS-316LN-IG.

30 CFR 57.15001 - First aid materials.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false First aid materials. 57.15001 Section 57.15001 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... Surface and Underground § 57.15001 First aid materials. Adequate first-aid materials, including stretchers...

Quantification of the resource recovery potential of municipal solid waste incineration bottom ashes.

Science.gov (United States)

Allegrini, Elisa; Maresca, Alberto; Olsson, Mikael Emil; Holtze, Maria Sommer; Boldrin, Alessio; Astrup, Thomas Fruergaard

2014-09-01

Municipal solid waste incineration (MSWI) plays an important role in many European waste management systems. However, increasing focus on resource criticality has raised concern regarding the possible loss of critical resources through MSWI. The primary form of solid output from waste incinerators is bottom ashes (BAs), which also have important resource potential. Based on a full-scale Danish recovery facility, detailed material and substance flow analyses (MFA and SFA) were carried out, in order to characterise the resource recovery potential of Danish BA: (i) based on historical and experimental data, all individual flows (representing different grain size fractions) within the recovery facility were quantified, (ii) the resource potential of ferrous (Fe) and non-ferrous (NFe) metals as well as rare earth elements (REE) was determined, (iii) recovery efficiencies were quantified for scrap metal and (iv) resource potential variability and recovery efficiencies were quantified based on a range of ashes from different incinerators. Recovery efficiencies for Fe and NFe reached 85% and 61%, respectively, with the resource potential of metals in BA before recovery being 7.2%ww for Fe and 2.2%ww for NFe. Considerable non-recovered resource potential was found in fine fraction (below 2mm), where approximately 12% of the total NFe potential in the BA were left. REEs were detected in the ashes, but the levels were two or three orders of magnitude lower than typical ore concentrations. The lack of REE enrichment in BAs indicated that the post-incineration recovery of these resources may not be a likely option with current technology. Based on these results, it is recommended to focus on limiting REE-containing products in waste for incineration and improving pre-incineration sorting initiatives for these elements. Copyright © 2014 Elsevier Ltd. All rights reserved.

Information Assurance for Enterprise Resource Planning Systems: Risk Considerations in Public Sector Organizations

International Nuclear Information System (INIS)

Naeem, S.; Islam, M.H.

2016-01-01

ERP (Enterprise Resource Planning) systems reveal and pose non-typical risks due to its dependencies of interlinked business operations and process reengineering. Understanding of such type of risks is significant conducting and planning assurance involvement of the reliability of these complicated computer systems. Specially, in case of distributed environment where data reside at multiple sites and risks are of unique nature. Until now, there are brief pragmatic grounds on this public sector ERP issue. To analyze this subject, a partially organized consultation study was carried out with 15 skilled information systems auditors who are specialists in evaluating ERP systems risks. This methodology permitted to get more elaborated information about stakeholder's opinions and customer experiences. In addition, interviewees mentioned a numerous basic execution troubles (e.g. inadequately skilled human resource and insufficient process reengineering attempts) that lead into enhanced hazards. It was also reported by the interviewees that currently risks vary across vendors and across applications. Eventually, in offering assurance with ERP systems participants irresistibly stresses examining the process instead of system end product. (author)

Information Assurance for Enterprise Resource Planning Systems: Risk Considerations in Public Sector Organizations

Directory of Open Access Journals (Sweden)

SHAHZAD NAEEM

2016-10-01

Full Text Available ERP (Enterprise Resource Planning systems reveal and pose non-typical risks due to its dependencies of interlinked business operations and process reengineering. Understanding of such type of risks is significant conducting and planning assurance involvement of the reliability of these complicated computer systems. Specially, in case of distributed environment where data reside at multiple sites and risks are of unique nature. Until now, there are brief pragmatic grounds on this public sector ERP issue. To analyze this subject, a partially organized consultation study was carried out with 15 skilled information systems auditors who are specialists in evaluating ERP systems risks. This methodology permitted to get more elaborated information about stakeholder?s opinions and customer experiences. In addition, interviewees mentioned a numerous basic execution troubles (e.g. inadequately skilled human resource and insufficient process reengineering attempts that lead into enhanced hazards. It was also reported by the interviewees that currently risks vary across vendors and across applications. Eventually, in offering assurance with ERP systems participants irresistibly stresses examining the process instead of system end product.

Advancing materials research

International Nuclear Information System (INIS)

Langford, H.D.; Psaras, P.A.

1987-01-01

The topics discussed in this volume include historical perspectives in the fields of materials research and development, the status of selected scientific and technical areas, and current topics in materials research. Papers are presentd on progress and prospects in metallurgical research, microstructure and mechanical properties of metals, condensed-matter physics and materials research, quasi-periodic crystals, and new and artifically structured electronic and magnetic materials. Consideration is also given to materials research in catalysis, advanced ceramics, organic polymers, new ways of looking at surfaces, and materials synthesis and processing

Commercial considerations in tissue engineering.

Science.gov (United States)

Mansbridge, Jonathan

2006-10-01

Tissue engineering is a field with immense promise. Using the example of an early tissue-engineered skin implant, Dermagraft, factors involved in the successful commercial development of devices of this type are explored. Tissue engineering has to strike a balance between tissue culture, which is a resource-intensive activity, and business considerations that are concerned with minimizing cost and maximizing customer convenience. Bioreactor design takes place in a highly regulated environment, so factors to be incorporated into the concept include not only tissue culture considerations but also matters related to asepsis, scaleup, automation and ease of use by the final customer. Dermagraft is an allogeneic tissue. Stasis preservation, in this case cryopreservation, is essential in allogeneic tissue engineering, allowing sterility testing, inventory control and, in the case of Dermagraft, a cellular stress that may be important for hormesis following implantation. Although the use of allogeneic cells provides advantages in manufacturing under suitable conditions, it raises the spectre of immunological rejection. Such rejection has not been experienced with Dermagraft. Possible reasons for this and the vision of further application of allogeneic tissues are important considerations in future tissue-engineered cellular devices. This review illustrates approaches that indicate some of the criteria that may provide a basis for further developments. Marketing is a further requirement for success, which entails understanding of the mechanism of action of the procedure, and is illustrated for Dermagraft. The success of a tissue-engineered product is dependent on many interacting operations, some discussed here, each of which must be performed simultaneously and well.

Materials and Fuels Complex Hazardous Waste Management Act/Resource Conservation and Recovery Act Storage and Treatment Permit Reapplication, Environmental Protection Agency Number ID4890008952

Energy Technology Data Exchange (ETDEWEB)

Holzemer, Michael J. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hart, Edward [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-04-01

Hazardous Waste Management Act/Resource Conservation and Recovery Act Storage and Treatment Permit Reapplication for the Idaho National Laboratory Materials and Fuels Complex Hazardous Waste Management Act/Resource Conservation and Recovery Act Partial Permit, PER-116. This Permit Reapplication is required by the PER-116 Permit Conditions I.G. and I.H., and must be submitted to the Idaho Department of Environmental Quality in accordance with IDAPA 58.01.05.012 [40 CFR §§ 270.10 and 270.13 through 270.29].

Human Resources Management within Civil Service

Directory of Open Access Journals (Sweden)

Victor Teodor Alistar

2012-12-01

Full Text Available The main objective of this article is to examine the notion of management, as an area of study which analyses, regulates and renders the theoretical and technical support in order to provide rationality within the processes that unfold in the civil service. In order to accomplish this task, human resources management will be analyzed as a process which relies in exerting four main functions: ensuring, developing, motivating and maintaining the human resources, which are conditioned by external factors that must be taken into consideration, such as: legislative framework, labor force, unions, cultural context (here one includes management practices and philosophy, and economic circumstances. All these factors are considered to have a significant impact on the management of human resources.

Optimal allocation of resources in systems

International Nuclear Information System (INIS)

Derman, C.; Lieberman, G.J.; Ross, S.M.

1975-01-01

In the design of a new system, or the maintenance of an old system, allocation of resources is of prime consideration. In allocating resources it is often beneficial to develop a solution that yields an optimal value of the system measure of desirability. In the context of the problems considered in this paper the resources to be allocated are components already produced (assembly problems) and money (allocation in the construction or repair of systems). The measure of desirability for system assembly will usually be maximizing the expected number of systems that perform satisfactorily and the measure in the allocation context will be maximizing the system reliability. Results are presented for these two types of general problems in both a sequential (when appropriate) and non-sequential context

Safeguards resource management

International Nuclear Information System (INIS)

Strait, R.S.

1986-01-01

Protecting nuclear materials is a challenging problem for facility managers. To counter the broad spectrum of potential threats, facility managers rely on diverse safeguards measures, including elements of physical protection, material control and accountability, and human reliability programs. Deciding how to upgrade safeguards systems involves difficult tradeoffs between increased protection and the costs and operational impact of protection measures. Effective allocation of safeguards and security resources requires a prioritization of systems upgrades based on a relative measure of upgrade benefits to upgrade costs. Analytical tools are needed to help safeguards managers measure the relative benefits and cost and allocate their limited resources to achieve balanced, cost-effective protection against the full spectrum of threats. This paper presents a conceptual approach and quantitative model that have been developed by Lawrence Livermore National Laboratory to aid safeguards managers

The usefulness of resource analysis in national economic planning. Examples from the Norwegian Shelf

International Nuclear Information System (INIS)

Kalheim, J.E.; Brekke, H.

1996-01-01

Petroleum resources have an important influence on the economic life in Norway. To the official authorities it is therefore essential to have good and detailed knowledge of these resources. Questions like 'what are the total resources', 'how much of the resources have been produced' and 'how much is expected to remain' should be answered. A classification system and an updated resource account is therefore required. Even though there is currently a well defined classification system and a resource account which is annually updated, estimates of discovered resources are associated with considerable uncertainty for some fields and discoveries. The uncertainties are not only connected to the mapping of field sizes but also to the possible potential for improved recovery, particularly in the light of new or sophisticated recovery methods. During the last two years the Norwegian Petroleum Directorate (NPD) has paid considerable attention to the potential for improved oil recovery. This is because of the time-critical aspects in the producing fields. The assessment of undiscovered resources also includes large uncertainties. However, regardless of the uncertainties such assessments are important for long term national planning. Decisions concerning opening of new areas for future exploration will have a considerable impact on the future level of the petroleum activities. To national authorities it is therefore important to have an understanding of what economic potential the undiscovered resources may represent. To resource analysts it will be important to know how the results from the geological assessments are uses in the economic calculations. Different resource assessments of a single play model are compared, and a comparison between different prospect evaluations of one single prospect are also presented. This approach is used to focus on the most critical uncertainty factors. 8 refs

Recent advances in membrane materials: introductory remarks

International Nuclear Information System (INIS)

Ayral, A.

2007-01-01

A lot of separation operations are currently performed using membranes both for production processes and for environmental applications. The main part of the used membranes are organic membranes but for specific conditions of utilization inorganic or organic-inorganic membranes have been also developed. Among the applications for gas separation, some examples are the removal of hydrogen from ammonia synthesis gas, the removal of carbon dioxide from natural gas and air separation. Environmental considerations like massive scale air and water pollution and also the gradual rarefaction of fossil energy resources gave rise to the concept of sustainable growth and to related strategies like process intensification, the reuse of water and solvents at their point of use, hydrogen as energy vector (requiring H 2 production...)..Membranes will have a key part to play in the new technologies associated with these strategies. Intensive efforts of research and development are now engaged everywhere in the world to develop high performance membranes for those emerging applications. Membrane science is a multidisciplinary scientific and technological domain covering mainly materials science, physical chemistry, chemical engineering, modeling. This issue (Annales de chimie - Science des materiaux, 2007 Vol.32 N.2) provides a wide review of recent advances in membrane materials. It is based on the contributions of experts in different fields of membrane materials (organic, organic-inorganic hybrid, composite, carbon, metallic, ceramic; dense, porous, surface modified materials). (O.M.)

HUMAN RESOURCES AND HUMAN RESOURCES STRATEGY – STRATEGIC PARTNERS OF AN ORGANIZATION

Directory of Open Access Journals (Sweden)

MUNTEANU ANCA-IOANA

2015-03-01

Full Text Available This work is purely theoretical, based on information in the literature, but also on their correlations. The text does not have a generalized, but are personal opinions and conclusions. The objective of this paper is to present particular emphasis to be placed today on the implications of human resources of an organization and human resources strategy have on vital processes within any organization, namely strategic planning, implementing changes and achieve competitive advantage. Organizations should have easily adaptable employees with skills needed to meet customer needs and adapt to permanent changes in the environment in real time. The goal of any organization is to attract more customers to get a favorable market position and competitive advantage against competitors. To achieve these goals, the role and importance of human resources in an organization has evolved into a considerably. Being accepted as a strategic partners of the organizations, human resources begin to be involved in determining strategy, decision-making on the organization as a whole. The emphasis in this paper on presenting the importance of human resources and human resources strategy in an organization, the special role that they have in supporting the overall strategy of the organization through strategic planning, implementation of organizational changes that are so necessary to adapt company's current customer requirements, can be a focal point for business and cause awareness among key stakeholders in a company, the need straightening attention to the foregoing

Modern electronic materials

CERN Document Server

Watkins, John B

2013-01-01

Modern Electronic Materials focuses on the development of electronic components. The book first discusses the history of electronic components, including early developments up to 1900, developments up to World War II, post-war developments, and a comparison of present microelectric techniques. The text takes a look at resistive materials. Topics include resistor requirements, basic properties, evaporated film resistors, thick film resistors, and special resistors. The text examines dielectric materials. Considerations include basic properties, evaporated dielectric materials, ceramic dielectri

Material Systems

DEFF Research Database (Denmark)

Jensen, Mads Brath; Mortensen, Henrik Rubæk; Mullins, Michael

2009-01-01

This paper describes and reflects upon the results of an investigative project which explores the setting up of a material system - a parametric and generative assembly consisting of and taking into consideration material properties, manufacturing constraints and geometric behavior. The project...... approaches the subject through the construction of a logic-driven system aiming to explore the possibilities of a material system that fulfills spatial, structural and performative requirements concurrently and how these are negotiated in situations where they might be conflicting....

Report of the Material Control and Material Accounting Task Force: appendices

International Nuclear Information System (INIS)

1978-03-01

Five appendixes are presented. The first comprises a chronological development of material control and material accounting requirements. The second gives a description of current NRC control and material accounting requirements, practices, and capabilities. In the third a description is given of NRC's research and technical assistance program concerning the measurement and measurement quality control elements of licensee material control and material accounting systems. The fourth covers some special considerations related to inventory differences and their analysis. In the fifth a detailed description is presented of the evaluation methodologies used in development of improved material control and material accounting systems

Research resources for Drosophila: the expanding universe.

Science.gov (United States)

Matthews, Kathleen A; Kaufman, Thomas C; Gelbart, William M

2005-03-01

Drosophila melanogaster has been the subject of research into central questions about biological mechanisms for almost a century. The experimental tools and resources that are available or under development for D. melanogaster and its related species, particularly those for genomic analysis, are truly outstanding. Here we review three types of resource that have been developed for D. melanogaster research: databases and other sources of information, biological materials and experimental services. These resources are there to be exploited and we hope that this guide will encourage new uses for D. melanogaster information, materials and services, both by those new to flies and by experienced D. melanogaster researchers.

Readability assessment of online patient education materials from academic otolaryngology-head and neck surgery departments.

Science.gov (United States)

Svider, Peter F; Agarwal, Nitin; Choudhry, Osamah J; Hajart, Aaron F; Baredes, Soly; Liu, James K; Eloy, Jean Anderson

2013-01-01

The aim of this study was to compare the readability of online patient education materials among academic otolaryngology departments in the mid-Atlantic region, with the purpose of determining whether these commonly used online resources were written at a level readily understood by the average American. A readability analysis of online patient education materials was performed using several commonly used readability assessments including the Flesch Reading Ease Score, the Flesch-Kincaid Grade Level, Simple Measure of Gobbledygook, Gunning Frequency of Gobbledygook, the New Dale-Chall Test, the Coleman-Liau Index, the New Fog Count, the Raygor Readability Estimate, the FORCAST test, and the Fry Graph. Most patient education materials from these programs were written at or above an 11th grade reading level, considerably above National Institutes of Health guidelines for recommended difficulty. Patient educational materials from academic otolaryngology Web sites are written at too difficult a reading level for a significant portion of patients and can be simplified. Copyright © 2013 Elsevier Inc. All rights reserved.

Setting Up CD-ROM Work Areas. Part I: Ergonomic Considerations, User Furniture, Location.

Science.gov (United States)

Vasi, John; LaGuardia, Cheryl

1992-01-01

The first of a two-part series on design of CD-ROM work areas in libraries discusses (1) space and location considerations; (2) ergonomics, including work surface, chairs, lighting, printers, other accessories, and security; and (3) other considerations, including staff assistance, reference tools, literature racks, and promotional materials. (MES)

Entrepreneurship as re-sourcing

DEFF Research Database (Denmark)

Korsgaard, Steffen; Anderson, Alistair; Gaddefors, Johan

Objectives The purpose of this paper is to re-examine the concept of entrepreneurship in light of the current financial and environmental crisis and its socio-spatial impact. Building on Hudson’s analysis of production in late-capitalist societies, we identify problems inherent in the dominant...... of grounding in material reality, lacking emphasis on environmental externalities and an impoverished conceptualization of spatial relations. Comparing this analysis with the dominant opportunistic image of the entrepreneur, leads us to formulate a critique of this image. In formulating an alternative we build...... The paper presents a “new image” of entrepreneurship as re-sourcing. The concept of re-sourcing emphasizes the dual meaning of the word resource as both a stock of supply and strategy or action adopted in adverse circumstances. Re-sourcing thus signifies a shift in focus from opportunities to resources...

Review of international classification systems for uranium resources

International Nuclear Information System (INIS)

Wang Wenyou

2007-01-01

The two primary classification systems for uranium resources in common use in the whole world are described. These uranium resource classification systems were developed under two distinct philosophies, it implies two very different processes, criteria, terms and definitions from which the systems evolved and were implemented. However, the two primary systems are all based on two considerations: the degree of geological confidence and the degree of economic attractiveness based on cost of producing the resource. The uranium resource classification methods currently used in most major uranium producing countries have all a bearing on the two aforesaid classification systems. The disparity exists only in the way or practice of classifying and estimating the uranium resources for reasons of different political and economical systems in various countries. The harmonization of these resource classification systems for uranium can be realized with the economic integration on a global scale. (authors)

Effective Management of Human Resources for Business and ...

African Journals Online (AJOL)

Manpower is one of the many resources of an organization. Its relevance cannot be over emphasized as it combines other resources such as capital, materials, and machines, together to achieve organizational goal. Therefore effective management of human resources is pertinent for business and church growth.

Unused Energy Resources of the Republic of Croatia

International Nuclear Information System (INIS)

Potocnik, V.

2008-01-01

Croatia has very modest fossil fuels resources and relatively large unused potentials of increasing energy efficiency and renewable energy sources. Energy import dependency is close to 60 percent and constantly rising, thus increasing already considerable Croatian foreign debt. By using potential of these resources until the year 2020 Croatia could almost totally eliminate fossil fuels import, reduce foreign debt as well as energy systems' harmful influences on environment, climate and health, and increase domestic employment.(author)

Ethical considerations for vaccination programmes in acute humanitarian emergencies

Science.gov (United States)

Hardie, Kate; Selgelid, Michael J; Waldman, Ronald J; Strebel, Peter; Rees, Helen; Durrheim, David N

2013-01-01

Abstract Humanitarian emergencies result in a breakdown of critical health-care services and often make vulnerable communities dependent on external agencies for care. In resource-constrained settings, this may occur against a backdrop of extreme poverty, malnutrition, insecurity, low literacy and poor infrastructure. Under these circumstances, providing food, water and shelter and limiting communicable disease outbreaks become primary concerns. Where effective and safe vaccines are available to mitigate the risk of disease outbreaks, their potential deployment is a key consideration in meeting emergency health needs. Ethical considerations are crucial when deciding on vaccine deployment. Allocation of vaccines in short supply, target groups, delivery strategies, surveillance and research during acute humanitarian emergencies all involve ethical considerations that often arise from the tension between individual and common good. The authors lay out the ethical issues that policy-makers need to bear in mind when considering the deployment of mass vaccination during humanitarian emergencies, including beneficence (duty of care and the rule of rescue), non-maleficence, autonomy and consent, and distributive and procedural justice. PMID:23599553

Emerging technologies for knowledge resource management

CERN Document Server

Pandian, M

2007-01-01

Emerging Technologies for Knowledge Resource Management examines various factors that contribute to an enabled environment for optimum utilisation of information resources. These include the digital form of information resources, which are inherently sharable, consortia as a concept to bring people and materials together and unified portals as technology to bring together disparate and heterogeneous resources for sharing and access. The book provides a step-by-step guideline for system analysis and requirements analysis. The book also provides reviews of existing portal models for sharing reso

30 CFR 56.16004 - Containers for hazardous materials.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Containers for hazardous materials. 56.16004 Section 56.16004 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 56.16004 Containers for hazardous materials. Containers holding hazardous materials...

30 CFR 57.16004 - Containers for hazardous materials.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Containers for hazardous materials. 57.16004 Section 57.16004 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 57.16004 Containers for hazardous materials. Containers holding hazardous materials...

Thermodynamic considerations for the use of vanadium alloys with ceramic breeder materials

International Nuclear Information System (INIS)

Johnson, C.E.; Johnson, I.; Kopasz, J.P.

1995-01-01

Fusion energy is considered to be an attractive energy form because of its minimal environmental impact. In order to maintain this favorable status, every effort needs to be made to use low activation materials wherever possible. The tritium breeder blanket is a focal point of system design engineers who must design environmentally attractive blankets through the use of low activation materials. Of the several candidate lithium-containing ceramics being considered for use in the breeder blanket, Li 2 O, Li 2 TiO 3 , are attractive choices because of their low activation. Also, low activation materials like the vanadium alloys are being considered for use as structural materials in the blanket. The suitability of vanadium alloys for containment of lithium ceramics is the subject of this study. Thermodynamic evaluations are being used to estimate the compatibility and stability of candidate ceramic breeder materials (Li 2 O, Li 2 TiO 3 , and Li 2 ZrO 3 ) with vanadium and vanadium alloys. This thermodynamic evaluation will focus first on solid-solid interactions. As a tritium breeding blanket will use a purge gas for tritium recovery, gas-solid systems will also receive attention

A mechanism for revising accreditation standards: a study of the process, resources required and evaluation outcomes.

Science.gov (United States)

Greenfield, David; Civil, Mike; Donnison, Andrew; Hogden, Anne; Hinchcliff, Reece; Westbrook, Johanna; Braithwaite, Jeffrey

2014-11-21

The study objective was to identify and describe the process, resources and expertise required for the revision of accreditation standards, and report outcomes arising from such activities. Secondary document analysis of materials from an accreditation standards development agency. The Royal Australian College of General Practitioners' (RACGP) documents, minutes and reports related to the revision of the accreditation standards were examined. The RACGP revision of the accreditation standards was conducted over a 12 month period and comprised six phases with multiple tasks, including: review methodology planning; review of the evidence base and each standard; new material development; constructing field trial methodology; drafting, trialling and refining new standards; and production of new standards. Over 100 individuals participated, with an additional 30 providing periodic input and feedback. Participants were drawn from healthcare professional associations, primary healthcare services, accreditation agencies, government agencies and public health organisations. Their expertise spanned: project management; standards development and writing; primary healthcare practice; quality and safety improvement methodologies; accreditation implementation and surveying; and research. The review and development process was shaped by five issues: project expectations; resource and time requirements; a collaborative approach; stakeholder engagement; and the product produced. The RACGP evaluation was that participants were positive about their experience, the standards produced and considered them relevant for the sector. The revision of accreditation standards requires considerable resources and expertise, drawn from a broad range of stakeholders. Collaborative, inclusive processes that engage key stakeholders helps promote greater industry acceptance of the standards.

Design considerations for CRBRP heat transport system piping operating at elevated temperatures

International Nuclear Information System (INIS)

Pollono, L.P.; Mello, R.M.

1979-01-01

The heat transport system sodium piping for the Clinch River Breeder Reactor Plant (CRBRP) within the reactor containment building must withstand high temperatures for long periods of time. Each phase of the mechanical design process of the piping system is influenced by elevated temperature considerations which include material thermal creep effects, ratchetting caused by rapid temperature transients and stress relaxation, and material degradation effects. The structural design philosophy taken to design the CRBRP piping operating in a high temperature environment is described. The resulting design of the heat transport system piping is presented along with a discussion of special features that resulted from the elevated temperature considerations

Considerations Regarding Students’ Social Protection

Directory of Open Access Journals (Sweden)

Iuliana Cenar

2016-01-01

Full Text Available The paper entitled “Considerations Regarding Students’ Social Protection” addresses the main forms of support offered to students and their families, divided in relation to the aim pursued, which may be relate to stimulating students’ performance and discipline, material and financial support (social assistance, supplementing family income. For these components there were taken into account: the circumstances in which it acquires to status of beneficiary, evolutionary dimensions in terms of beneficiary numbers, the amounts awarded, the need to ensure the complementarities with the informal side of social protection.

Considerations for reducing food system energy demand while scaling up urban agriculture

Science.gov (United States)

Mohareb, Eugene; Heller, Martin; Novak, Paige; Goldstein, Benjamin; Fonoll, Xavier; Raskin, Lutgarde

2017-12-01

There is an increasing global interest in scaling up urban agriculture (UA) in its various forms, from private gardens to sophisticated commercial operations. Much of this interest is in the spirit of environmental protection, with reduced waste and transportation energy highlighted as some of the proposed benefits of UA; however, explicit consideration of energy and resource requirements needs to be made in order to realize these anticipated environmental benefits. A literature review is undertaken here to provide new insight into the energy implications of scaling up UA in cities in high-income countries, considering UA classification, direct/indirect energy pressures, and interactions with other components of the food-energy-water nexus. This is followed by an exploration of ways in which these cities can plan for the exploitation of waste flows for resource-efficient UA. Given that it is estimated that the food system contributes nearly 15% of total US energy demand, optimization of resource use in food production, distribution, consumption, and waste systems may have a significant energy impact. There are limited data available that quantify resource demand implications directly associated with UA systems, highlighting that the literature is not yet sufficiently robust to make universal claims on benefits. This letter explores energy demand from conventional resource inputs, various production systems, water/energy trade-offs, alternative irrigation, packaging materials, and transportation/supply chains to shed light on UA-focused research needs. By analyzing data and cases from the existing literature, we propose that gains in energy efficiency could be realized through the co-location of UA operations with waste streams (e.g. heat, CO2, greywater, wastewater, compost), potentially increasing yields and offsetting life cycle energy demands relative to conventional approaches. This begs a number of energy-focused UA research questions that explore the

Technology assessment of geothermal energy resource development

Energy Technology Data Exchange (ETDEWEB)

1975-04-15

Geothermal state-of-the-art is described including geothermal resources, technology, and institutional, legal, and environmental considerations. The way geothermal energy may evolve in the United States is described; a series of plausible scenarios and the factors and policies which control the rate of growth of the resource are presented. The potential primary and higher order impacts of geothermal energy are explored, including effects on the economy and society, cities and dwellings, environmental, and on institutions affected by it. Numerical and methodological detail is included in appendices. (MHR)

Important features of Sustainable Aggregate Resource Management

Science.gov (United States)

Solar, Slavko V.; Shields, Deborah J.; Langer, William H.

2004-01-01

Every society, whether developed, developing or in a phase of renewal following governmental change, requires stable, adequate and secure supplies of natural resources. In the latter case, there could be significant need for construction materials for rebuilding infrastructure, industrial capacity, and housing. It is essential that these large-volume materials be provided in a rational manner that maximizes their societal contribution and minimizes environmental impacts. We describe an approach to resource management based on the principles of sustainable developed. Sustainable Aggregate Resource Management offers a way of addressing the conflicting needs and interests of environmental, economic, and social systems. Sustainability is an ethics based concept that utilizes science and democratic processes to reach acceptable agreements and tradeoffs among interests, while acknowledging the fundamental importance of the environment and social goods. We discuss the features of sustainable aggregate resource management.

Important Features of Sustainable Aggregate Resource Management

Directory of Open Access Journals (Sweden)

Slavko V. Šolar

2004-06-01

Full Text Available Every society, whether developed, developing or in a phase of renewal following governmental change, requires stable, adequate and secure supplies of natural resources. In the latter case, there could be significant need for construction materials for rebuilding infrastructure, industrial capacity, and housing. It is essential that these large-volume materials be provided in a rational manner that maximizes their societal contribution and minimizes environmental impacts. We describe an approach to resource management based on the principles of sustainable development. Sustainable Aggregate Resource Management offers a way of addressing the conflicting needs and interests of environmental, economic, and social systems. Sustainability is an ethics based concept that utilizes science and democratic processes to reach acceptable agreements and tradeoffs among interests, while acknowledging the fundamental importance of the environment and social goods. We discuss the features of sustainable aggregate resource management.

World uranium resources, production and demand

International Nuclear Information System (INIS)

Lindholm, I.

1988-01-01

Reasonably assured resources of uranium in WOCA (World Outside the Centrally Planned Economies Area) countries recoverable at less than US $80/kg U increased by about 9% between 1983 and 1985 and currently stand at 1.5 million tonnes. Uranium also exists in significant quantities in higher cost resources or in less known resources. However, the annual exploration expenditure is less than 20% that of the 1979 level. Uranium production in WOCA countries was higher than consumption during the period 1965 to 1984 and considerable stocks were accumulated. However, the production figures for 1985 were estimated to be slightly less than those of consumption. Production from centres now on stand-by or new centres will probably be necessary around 1990. Analysis of the longer term production possibilities indicates that uranium supplies will probably not be constrained by an ultimate resource adequacy. Constraints, if any, are more likely to be of political nature. (author). 11 figs, 1 tab

Review - Water resources development

International Nuclear Information System (INIS)

Todd, David K.

1970-01-01

For the past 15 years the possibilities of employing nuclear explosives to develop and manage water resources for the benefit of man have been studied, Experimental and theoretical studies of many types have been undertaken. Numerous applications have been considered including site studies for particular projects. Attention has been given to the economics of specific applications, to hazards and safety problems, to legal limitations, to geologic and hydrologic considerations, and to effects on water quality. The net result of this effort has been the development of a large body of knowledge ready to be drawn upon wherever and whenever needed. Nuclear explosives are important tools for water resources development; they must be carefully selected so as to serve their intended purpose at minimum cost with few side effects. (author)

Review - Water resources development

Energy Technology Data Exchange (ETDEWEB)

Todd, David K [Civil Engineering, University of California, Berkeley (United States)

1970-05-15

For the past 15 years the possibilities of employing nuclear explosives to develop and manage water resources for the benefit of man have been studied, Experimental and theoretical studies of many types have been undertaken. Numerous applications have been considered including site studies for particular projects. Attention has been given to the economics of specific applications, to hazards and safety problems, to legal limitations, to geologic and hydrologic considerations, and to effects on water quality. The net result of this effort has been the development of a large body of knowledge ready to be drawn upon wherever and whenever needed. Nuclear explosives are important tools for water resources development; they must be carefully selected so as to serve their intended purpose at minimum cost with few side effects. (author)

Building an Information Resource Center for Competitive Intelligence.

Science.gov (United States)

Martin, J. Sperling

1992-01-01

Outlines considerations in the design of a Competitive Intelligence Information Resource Center (CIIRC), which is needed by business organizations for effective strategic decision making. Discussed are user needs, user participation, information sources, technology and interface design, operational characteristics, and planning for implementation.…

Some considerations in the handling of fluorine and the chlorine fluorides

International Nuclear Information System (INIS)

Farrar, R.L. Jr.; Barber, E.J.

1979-01-01

This paper reviews many considerations in the safe handling of fluorine and the chlorine fluorides. The physical, chemical, and toxicological properties of the materials are reviewed. Proper choice of materials of construction and materials in contact with the active gases are considered. The survey includes safe practices in design and operation of experiments and processes. Soda lime traps and caustic scrubbing are reviewed for fluorine disposal methods. Finally some explosive reactions and explosive situations are discussed

Thermodynamic considerations for the use of vanadium alloys with ceramic breeder materials

Energy Technology Data Exchange (ETDEWEB)

Johnson, C.E.; Johnson, I.; Kopasz, J.P.

1995-12-31

Fusion energy is considered to be an attractive energy form because of its minimal environmental impact. In order to maintain this favorable status, every effort needs to be made to use low activation materials wherever possible. The tritium breeder blanket is a focal point of system design engineers who must design environmentally attractive blankets through the use of low activation materials. Of the several candidate lithium-containing ceramics being considered for use in the breeder blanket, Li{sub 2}O, Li{sub 2}TiO{sub 3}, are attractive choices because of their low activation. Also, low activation materials like the vanadium alloys are being considered for use as structural materials in the blanket. The suitability of vanadium alloys for containment of lithium ceramics is the subject of this study. Thermodynamic evaluations are being used to estimate the compatibility and stability of candidate ceramic breeder materials (Li{sub 2}O, Li{sub 2}TiO{sub 3}, and Li{sub 2}ZrO{sub 3}) with vanadium and vanadium alloys. This thermodynamic evaluation will focus first on solid-solid interactions. As a tritium breeding blanket will use a purge gas for tritium recovery, gas-solid systems will also receive attention.

Material Resources and Population Health: Disadvantages in Health Care, Housing, and Food Among Adults Over 50 Years of Age

Science.gov (United States)

Soldo, Beth J.; Pagán, José A.; McCabe, John; deBlois, Madeleine; Field, Samuel H.; Asch, David A.; Cannuscio, Carolyn

2009-01-01

Objectives. We examined associations between material resources and late-life declines in health. Methods. We used logistic regression to estimate the odds of declines in self-rated health and incident walking limitations associated with material disadvantages in a prospective panel representative of US adults aged 51 years and older (N = 15 441). Results. Disadvantages in health care (odds ratio [OR] = 1.39; 95% confidence interval [CI] = 1.23, 1.58), food (OR = 1.69; 95% CI = 1.29, 2.22), and housing (OR = 1.20; 95% CI = 1.07, 1.35) were independently associated with declines in self-rated health, whereas only health care (OR = 1.43; 95% CI = 1.29, 1.58) and food (OR = 1.64; 95% CI = 1.31, 2.05) disadvantage predicted incident walking limitations. Participants experiencing multiple material disadvantages were particularly susceptible to worsening health and functional decline. These effects were sustained after we controlled for numerous covariates, including baseline health status and comorbidities. The relations between health declines and non-Hispanic Black race/ethnicity, poverty, marital status, and education were attenuated or eliminated after we controlled for material disadvantage. Conclusions. Material disadvantages, which are highly policy relevant, appear related to health in ways not captured by education and poverty. Policies to improve health should address a range of basic human needs, rather than health care alone. PMID:19890175

32 CFR Enclosure 2 - Requirements for Environmental Considerations-Foreign Nations and Protected Global Resources

Science.gov (United States)

2010-07-01

... a serious public health risk; or (2) a physical project that is prohibited or strictly regulated in... of global importance designated for protection by the President or, in the case of such a resource... studies—bilateral or multilateral environmental studies, relevant or related to the proposed action, by...

Resources for GCSE.

Science.gov (United States)

Anderton, Alain

1987-01-01

Argues that new resources are needed to help teachers prepare students for the new General Certificate in Secondary Education (GCSE) examination. Compares previous examinations with new examinations to illustrate the problem. Presents textbooks, workbooks, computer programs, and other curriculum materials to demonstrate the gap between resources…

Dematerialization—A Disputable Strategy for Resource Conservation Put under Scrutiny

Directory of Open Access Journals (Sweden)

Felix Müller

2017-12-01

Full Text Available Dematerialization is a paradigm in resource conservation strategies. Material use should be reduced so that resource consumption as a whole can be lowered. The benefit for humankind should be completely decoupled from the natural expenditure by a definite factor X. Instinctively, this approach is convincing, because our entire value-added chain is based on material transformation. Targets for mass-based indicators are found within the context of justification for ecological carrying capacity and intergenerational fairness, taking into account the economic and socio-political expectation of raw material scarcity. However, in light of further development of material flow indicators and the related dematerialization targets, the question arises as to what they actually stand for and what significance they have for resource conservation. Can it be assumed that pressure on the environment will decline steadily if the use of materials is reduced, whether for an economy or at the level of individual products or processes? The present narrative review paper has discussed this issue and takes into account the authors’ experience of the extended political and scientific discourse on dematerialization in Germany and Europe. As a result, a high “resource relevance” cannot be inferred from high physical material inputs at any of the levels considered. It has been shown that establishing mass-based indicators as control and target variables is questionable and that dematerialization exclusively based on such indicators without mapping other resources should be critically examined.

Climate protection, natural resources management and soil improvement by combined Energetic and Material Utilization of lignocellulosic agricultural WAstes and residues (CEMUWA)

International Nuclear Information System (INIS)

Schuech, Andrea; Nelles, Michael; Tscherpel, Burckhard; El Behery, Ahmed; Menanz, Rania; Bahl, Hubert; Scheel, Michael; Nipkow, Mareen

2015-01-01

The project Climate protection, natural resources management and soil improvement by combined Energetic and Material Utilization of lignocellulosic agricultural WAstes and residues (CEMUWA) was implemented with long-term partners from Egypt and Germany leaded by the Department Waste Management and Material Flow from September 2011 until October 2013. Aim of the project was the development of technologies for the utilization of agricultural wastes and residues at the example of rice straw, with the focus on the energetic and material use. In the long term a contribution to climate protection and natural resource management could be reached. The focus was on investigations in the field of biogas, ethanol and butanol production including pretreatment as well as the material use in horticulture. The results show that the biogas and ethanol production with adapted pretreatments of rice straws is possible. The technical adaptation of a biogas plant (eo-digestion) would be associated with about 20% higher investment costs and higher operating costs with an approximately 15% higher energy demand. In Germany, however, this may still economically by the substitution of expensive or difficult available energy crops (reduction of substrate costs by 30 to 35% for a 600 kWel-BGP using maize silage). The investigated solutions for material use in Egypt showed good results, which in some cases exceeded the expectations. By the use of rice straw imported peat substrates could be substitute or irrigation water saved, what is ecologically and economically useful. The production of ethanol from rice straw was implemented on laboratory scale and preconditions for investigations in semi-industrial and partly pilot scale were created. The bilateral project'' was funded in the framework of the German-Egypt-Research-Fond (GERF) by the German Federal Ministry of Education and Research (BMBF) and the Egyptian Science and Technology Development Fund in Egypt (STDF). The total budget

Increased component safety through improved methods for residual stress analysis. Subprojects. Consideration of the elastic-plastic material properties (Phase 2). Final report

International Nuclear Information System (INIS)

Mirbach, David von

2015-01-01

Residual stresses in mechanical components can result in both detrimental but also beneficial effects on the strength and lifetime of the components. The most detailed knowledge of the residual stress state is of advantage or a pre-requisite for the assessment of the component performance. Two commonly used methods for determination of residual stresses are the hole drilling method and the ring core method which can be regarded to the mechanical methods. In the context of reactor safety research of the German Federal Ministry of Economic and Energy (BMWi) two fundamental and interacting weak points of the hole drilling method as well as of the ring core method, respectively, in order to determine residual stresses are going to be investigated. As a consequence reliability of the methods will be improved in this joint research project. On the one hand there are effects of geometrical boundary conditions of the components and on the other hand there is the influence of plasticity due to notch effects both affecting the released strain field after removing material and after all the calculated residual stresses. The first issue mentioned above is under the responsibility of the Institute of Materials Engineering (Kassel University) and the last one is investigated by materials testing institute university Stuttgart. As a consequence of a successful project the knowledge base will be considerably improved resulting in benefits for various engineering fields. Especially the quantitative consideration of real residual stress states for optimized component designs will be possible and after all the consequences of residual stresses on safety of components which are used in nuclear facilities can be evaluated. In this second experimental research chapter (phase 2) the findings of the first numerical and theoretical research chapter (phase 1) where proofed. The developed differential calculation method with the method of adaptive calibration functions were compared with the

Chemicals in material cycles

DEFF Research Database (Denmark)

Pivnenko, Kostyantyn; Eriksson, Eva; Astrup, Thomas Fruergaard

2015-01-01

Material recycling has been found beneficial in terms of resource and energy performance and is greatly promoted throughout the world. A variety of chemicals is used in materials as additives and data on their presence is sparse. The present work dealt with paper as recyclable material and diisob...

Research into Open Educational Resources for Development | CRDI ...

International Development Research Centre (IDRC) Digital Library (Canada)

Among them is the growing demand for postsecondary education when most ... thanks in part to greater access to the Internet and new flexible intellectual property licenses. ... While OERs are receiving considerable attention in universities, education ... develop researchers' capacity to analyze open educational resources; ...

Overexploitation of fishry resources, with particular reference to Goa

Digital Repository Service at National Institute of Oceanography (India)

Ansari, Z.A.; Achuthankutty, C.T.; Dalal, S.G.

consideration of physical reforms such as resource rent from which economic benefits can be derived in the form of value-added local employment, income, and food security, although these are highly location specific. Opportunities exist to review progress...

Advanced energy materials

CERN Document Server

Tiwari, Ashutosh

2014-01-01

An essential resource for scientists designing new energy materials for the vast landscape of solar energy conversion as well as materials processing and characterization Based on the new and fundamental research on novel energy materials with tailor-made photonic properties, the role of materials engineering has been to provide much needed support in the development of photovoltaic devices. Advanced Energy Materials offers a unique, state-of-the-art look at the new world of novel energy materials science, shedding light on the subject's vast multi-disciplinary approach The book focuses p

Recovery of hazardous semiconductor-industry sludge as a useful resource.

Science.gov (United States)

Lee, Tzen-Chin; Liu, Feng-Jiin

2009-06-15

Sludge, a solid waste recovered from wastewater of semiconductor-industries composes of agglomerates of nano-particles like SiO(2) and CaF(2). This sludge deflocculates in acidic and alkaline aqueous solutions into nano-particles smaller than 100 nm. Thus, this sludge is potentially hazardous to water resources when improperly dumped. It can cause considerable air-pollution when fed into rotary-kilns as a raw material for cement production. In this study, dried and pulverized sludge was used to replace 5-20 wt.% Portland cement in cement mortar. The compressive strength of the modified mortar was higher than that of plain cement mortar after curing for 3 days and more. In particular, the strength of mortar with 10 wt.% substitution improved by 25-35% after curing for 7-90 days. TCLP studies reveal no detectable release of heavy metals. Preliminary studies showed that nano-particles deflocculated from the sludge, when cured for up to 3 days retain in the modified mortar their nano-size, which become large-sized hydration compounds that contribute to the final mortar strength. Semiconductor sludge can thus be utilized as a useful resource to replace portion of cement in cement mortar, thereby avoiding their potential hazard on the environment.

PHYSICAL RESOURCES OF INFORMATION PROCESSES AND TECHNOLOGIES

Directory of Open Access Journals (Sweden)

Mikhail O. Kolbanev

2014-11-01

Full Text Available Subject of study. The paper describes basic information technologies for automating of information processes of data storage, distribution and processing in terms of required physical resources. It is shown that the study of these processes with such traditional objectives of modern computer science, as the ability to transfer knowledge, degree of automation, information security, coding, reliability, and others, is not enough. The reasons are: on the one hand, the increase in the volume and intensity of information exchange in the subject of human activity and, on the other hand, drawing near to the limit of information systems efficiency based on semiconductor technologies. Creation of such technologies, which not only provide support for information interaction, but also consume a rational amount of physical resources, has become an actual problem of modern engineering development. Thus, basic information technologies for storage, distribution and processing of information to support the interaction between people are the object of study, and physical temporal, spatial and energy resources required for implementation of these technologies are the subject of study. Approaches. An attempt is made to enlarge the possibilities of traditional cybernetics methodology, which replaces the consideration of material information component by states search for information objects. It is done by taking explicitly into account the amount of physical resources required for changes in the states of information media. Purpose of study. The paper deals with working out of a common approach to the comparison and subsequent selection of basic information technologies for storage, distribution and processing of data, taking into account not only the requirements for the quality of information exchange in particular subject area and the degree of technology application, but also the amounts of consumed physical resources. Main findings. Classification of resources

Municipal Solid Waste Resources

Energy Technology Data Exchange (ETDEWEB)

None

2016-06-01

Municipal solid waste (MSW) is a source of biomass material that can be utilized for bioenergy production with minimal additional inputs. MSW resources include mixed commercial and residential garbage such as yard trimmings, paper and paperboard, plastics, rubber, leather, textiles, and food wastes. Waste resources such as landfill gas, mill residues, and waste grease are already being utilized for cost-effective renewable energy generation. MSW for bioenergy also represents an opportunity to divert greater volumes of residential and commercial waste from landfills.

Estimate of Hot Dry Rock Geothermal Resource in Daqing Oilfield, Northeast China

OpenAIRE

Guangzheng Jiang; Yi Wang; Yizuo Shi; Chao Zhang; Xiaoyin Tang; Shengbiao Hu

2016-01-01

Development and utilization of deep geothermal resources, especially a hot dry rock (HDR) geothermal resource, is beneficial for both economic and environmental consideration in oilfields. This study used data from multiple sources to assess the geothermal energy resource in the Daqing Oilfield. The temperature logs in boreholes (both shallow water wells and deep boreholes) and the drilling stem test temperature were used to create isothermal maps in depths. Upon the temperature field and the...

Protecting resources for primary health care under fiscal federalism: options for resource allocation.

Science.gov (United States)

Okorafor, Okore A; Thomas, Stephen

2007-11-01

The introduction of fiscal federalism or decentralization of functions to lower levels of government is a reform not done primarily with health sector concerns. A major concern for the health sector is that devolution of expenditure responsibilities to sub-national levels of government can adversely affect the equitable distribution of financial resources across local jurisdictions. Since the adoption of fiscal federalism in South Africa, progress towards achieving a more equitable distribution of public sector health resources (financial) has slowed down considerably. This study attempts to identify appropriate resource allocation mechanisms under the current South African fiscal federal system that could be employed to promote equity in primary health care (PHC) allocations across provinces and districts. The study uses data from interviews with government officials involved in the budgeting and resource allocation process for PHC, literature on fiscal federalism and literature on international experience to inform analysis and recommendations. The results from the study identify historical incremental budgeting, weak managerial capacity at lower levels of government, poor accounting of PHC expenditure, and lack of protection for PHC funds as constraints to the realization of a more equitable distribution of PHC allocations. Based on interview data, no one resource allocation mechanism received unanimous support from stakeholders. However, the study highlights the particularly high level of autonomy enjoyed by provincial governments with regards to decision making for allocations to health and PHC services as the major constraint to achieving a more equitable distribution of PHC resources. The national government needs to have more involvement in decision making for resource allocation to PHC services if significant progress towards equity is to be achieved.

Material efficiency and the 3 Rs

CSIR Research Space (South Africa)

Van Wyk, Llewellyn V

2015-08-01

Full Text Available : Total primary material resource use Material/product Total Used (Kt) Quarry products 125,871 Cement, plaster, etc. 97,992 Stone and other non-metallic mineral products 43,631 Bricks and other clay-based products 5,979 Ceramic products 4... 94% of primary material resource use is ascribed to products used essentially in wet works of construction (stone, sand, cement, clay). It is unfortunately also the area most difficult to control. Although gains can be made through modular design...

Citizenship Education: Instructional Materials/Resources for High School Citizenship.

Science.gov (United States)

Kinoshita, Jane

This resource guide contains six units of study on citizenship education for use at the secondary level. The purpose of the units is to help students examine the political and legal processes of American society and the rights, responsibilities, and roles of its citizens. The units can be used as the basis for a one-semester elective course in…

Resource depletion promotes automatic processing: implications for distribution of practice.

Science.gov (United States)

Scheel, Matthew H

2010-12-01

Recent models of cognition include two processing systems: an automatic system that relies on associative learning, intuition, and heuristics, and a controlled system that relies on deliberate consideration. Automatic processing requires fewer resources and is more likely when resources are depleted. This study showed that prolonged practice on a resource-depleting mental arithmetic task promoted automatic processing on a subsequent problem-solving task, as evidenced by faster responding and more errors. Distribution of practice effects (0, 60, 120, or 180 sec. between problems) on rigidity also disappeared when groups had equal time on resource-depleting tasks. These results suggest that distribution of practice effects is reducible to resource availability. The discussion includes implications for interpreting discrepancies in the traditional distribution of practice effect.

Solution of environmental protection problems and complex utilization of raw materials during mining and processing of uranium ores

International Nuclear Information System (INIS)

Litvinenko, V.G.; Savva, P.P.

1993-01-01

Consideration is given to the complex of measures taken in Priargunsky industrial mine-chemical association and directed to environment protection, complex utilization of raw materials during mining and processing of uranium ores. These measures include: 1) reduction of toxic chemical agent effluents into atmosphere due to introduction of new methods and gas cleaning systems; 2) rational use of water resources owing to application of circulating water supply systems, waste waters treatment and effective control of the state of water consumption by industrial enterprises; 3) utilization of gangue and industrial solid wastes

"Wealth Makes Many Friends": Children Expect More Giving From Resource-Rich Than Resource-Poor Individuals.

Science.gov (United States)

Ahl, Richard E; Dunham, Yarrow

2017-08-21

Young children show social preferences for resource-rich individuals, although few studies have explored the causes underlying such preferences. We evaluate the viability of one candidate cause: Children believe that resource wealth relates to behavior, such that they expect the resource rich to be more likely to materially benefit others (including themselves) than the resource poor. In Studies 1 and 2 (ages 4-10), American children from predominantly middle-income families (n = 94) and Indian children from lower income families (n = 30) predicted that the resource rich would be likelier to share with others than the resource poor. In Study 3, American children (n = 66) made similar predictions in an incentivized decision-making task. The possibility that children's expectations regarding giving contribute to prowealth preferences is discussed. © 2017 The Authors. Child Development © 2017 Society for Research in Child Development, Inc.

Quantification of the resource recovery potential of municipal solid waste incineration bottom ashes

Energy Technology Data Exchange (ETDEWEB)

Allegrini, Elisa, E-mail: elia@env.dtu.dk [Technical University of Denmark, Department of Environmental Engineering, Building 115, 2800 Lyngby (Denmark); Maresca, Alberto; Olsson, Mikael Emil [Technical University of Denmark, Department of Environmental Engineering, Building 115, 2800 Lyngby (Denmark); Holtze, Maria Sommer [Afatek Ltd., Selinevej 18, 2300 Copenhagen S (Denmark); Boldrin, Alessio; Astrup, Thomas Fruergaard [Technical University of Denmark, Department of Environmental Engineering, Building 115, 2800 Lyngby (Denmark)

2014-09-15

Highlights: • Ferrous and non-ferrous metals were quantified in MSWI bottom ashes. • Metal recovery system efficiencies for bottom ashes were estimated. • Total content of critical elements was determined in bottom ash samples. • Post-incineration recovery is not viable for most critical elements. - Abstract: Municipal solid waste incineration (MSWI) plays an important role in many European waste management systems. However, increasing focus on resource criticality has raised concern regarding the possible loss of critical resources through MSWI. The primary form of solid output from waste incinerators is bottom ashes (BAs), which also have important resource potential. Based on a full-scale Danish recovery facility, detailed material and substance flow analyses (MFA and SFA) were carried out, in order to characterise the resource recovery potential of Danish BA: (i) based on historical and experimental data, all individual flows (representing different grain size fractions) within the recovery facility were quantified, (ii) the resource potential of ferrous (Fe) and non-ferrous (NFe) metals as well as rare earth elements (REE) was determined, (iii) recovery efficiencies were quantified for scrap metal and (iv) resource potential variability and recovery efficiencies were quantified based on a range of ashes from different incinerators. Recovery efficiencies for Fe and NFe reached 85% and 61%, respectively, with the resource potential of metals in BA before recovery being 7.2%ww for Fe and 2.2%ww for NFe. Considerable non-recovered resource potential was found in fine fraction (below 2 mm), where approximately 12% of the total NFe potential in the BA were left. REEs were detected in the ashes, but the levels were two or three orders of magnitude lower than typical ore concentrations. The lack of REE enrichment in BAs indicated that the post-incineration recovery of these resources may not be a likely option with current technology. Based on these results

Course Resource Lists.

Science.gov (United States)

England, Robert G.

The Mountain-Plains Course Resource List is presented by job title for 26 curriculum areas. For each area the printed materials, audiovisual aids, and equipment needed for the course are listed. The 26 curriculum areas are: mathematics skills, communication skills, office education, lodging services, food services, marketing and distribution,…

Comparative assessment of nanomaterial definitions and safety evaluation considerations.

Science.gov (United States)

Boverhof, Darrell R; Bramante, Christina M; Butala, John H; Clancy, Shaun F; Lafranconi, Mark; West, Jay; Gordon, Steve C

2015-10-01

Nanomaterials continue to bring promising advances to science and technology. In concert have come calls for increased regulatory oversight to ensure their appropriate identification and evaluation, which has led to extensive discussions about nanomaterial definitions. Numerous nanomaterial definitions have been proposed by government, industry, and standards organizations. We conducted a comprehensive comparative assessment of existing nanomaterial definitions put forward by governments to highlight their similarities and differences. We found that the size limits used in different definitions were inconsistent, as were considerations of other elements, including agglomerates and aggregates, distributional thresholds, novel properties, and solubility. Other important differences included consideration of number size distributions versus weight distributions and natural versus intentionally-manufactured materials. Overall, the definitions we compared were not in alignment, which may lead to inconsistent identification and evaluation of nanomaterials and could have adverse impacts on commerce and public perceptions of nanotechnology. We recommend a set of considerations that future discussions of nanomaterial definitions should consider for describing materials and assessing their potential for health and environmental impacts using risk-based approaches within existing assessment frameworks. Our intent is to initiate a dialogue aimed at achieving greater clarity in identifying those nanomaterials that may require additional evaluation, not to propose a formal definition. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

Chapter 8: Materials for Exploration Systems

Science.gov (United States)

Curreri, Peter A.

2017-01-01

Materials science and processing research in space can be thought of as a field of study that began with the sounding rocket experiments in the 1950s. Material science studies of the lunar surface materials returned during the Apollo missions enabled the study of lunar resource utilization. The study of materials science and processing in space continued with over 30 years of microgravity materials processing research which continues today in the International Space Station. These studies are the technical foundation that could enable lower cost human exploration through the use of in-situ propellant production, the production of energy from space resources, and the eventual establishment of a substantial portion of humanity living self sufficiently off Earth.

40 CFR 256.31 - Recommendations for developing and implementing resource conservation and recovery programs.

Science.gov (United States)

2010-07-01

... requirement. (4) Development of a strategy for the consideration of the legislature to prohibit and/or remove...; and (4) Development of a strategy and plan of action for the consideration of the legislature for... requirements, pricing mechanisms and long-term contract availability. (3) Resource recovery feasibility studies...

Security Considerations and Recommendations in Computer-Based Testing

Directory of Open Access Journals (Sweden)

Saleh M. Al-Saleem

2014-01-01

Full Text Available Many organizations and institutions around the globe are moving or planning to move their paper-and-pencil based testing to computer-based testing (CBT. However, this conversion will not be the best option for all kinds of exams and it will require significant resources. These resources may include the preparation of item banks, methods for test delivery, procedures for test administration, and last but not least test security. Security aspects may include but are not limited to the identification and authentication of examinee, the risks that are associated with cheating on the exam, and the procedures related to test delivery to the examinee. This paper will mainly investigate the security considerations associated with CBT and will provide some recommendations for the security of these kinds of tests. We will also propose a palm-based biometric authentication system incorporated with basic authentication system (username/password in order to check the identity and authenticity of the examinee.

Security considerations and recommendations in computer-based testing.

Science.gov (United States)

Al-Saleem, Saleh M; Ullah, Hanif

2014-01-01

Many organizations and institutions around the globe are moving or planning to move their paper-and-pencil based testing to computer-based testing (CBT). However, this conversion will not be the best option for all kinds of exams and it will require significant resources. These resources may include the preparation of item banks, methods for test delivery, procedures for test administration, and last but not least test security. Security aspects may include but are not limited to the identification and authentication of examinee, the risks that are associated with cheating on the exam, and the procedures related to test delivery to the examinee. This paper will mainly investigate the security considerations associated with CBT and will provide some recommendations for the security of these kinds of tests. We will also propose a palm-based biometric authentication system incorporated with basic authentication system (username/password) in order to check the identity and authenticity of the examinee.

Study into the feasibility of manufacturing liquid glass using resource-saving technology

Directory of Open Access Journals (Sweden)

Mizyuryaev Sergey

2017-01-01

Full Text Available The authors’ views on the problem of resource-saving in the production of building materials are outlined, with three main modes of resource-saving indicated: the use of cheap raw materials, a reduction in the production costs, and an increase in the efficiency of the produced materials and products. The research provides information on the production and use of liquid glass in industry, including the construction industry. The theoretical substantiation of the possibility of developing a resource-saving technology for the production of liquid glass for construction purposes is given. The work provides information on promising alternative raw material components - diatomite, natural rock and black ash, industrial waste. Their properties are given as well as the justification of their effective use as raw materials. The method of preparation of the components and their mixtures, the preparation of sodium silicate through roasting, and the identification of the suitability of the obtained product for the manufacture of efficient building materials are described. Conclusions are made in regards to the feasibility of producing liquid glass using resource-saving technology.

Investigation of the impacts of selected nanotechnology products with view to their demand for raw materials and energy

International Nuclear Information System (INIS)

Möller, M; Manhart, A; Diesner, M; Küppers, P; Spieth-Achtnich, A; Pistner, C

2014-01-01

In the study presented here qualitative and quantitative life-cycle considerations were employed to assess the potential material and energy savings that might be achieved through nanoenabled applications. Ten nanotechnology application fields with broad market coverage and immediate impact to either the generation of renewable energies or the use of critical resources were analyzed. Organic photovoltaic modules (solar cells that essentially consist of organic materials) and electronically dimmable windows (electrochromic laminated glass, which can be adjusted to conform to the ambient light conditions) as two very promising nano-enabled applications were quantitatively analyzed. Eight further products including neodymium magnets were evaluated on a qualitative basis. All assessments contain classical indicators such as energy efficiency, product carbon footprint, and resource consumption. In addition, pollutant aspects (exposure and toxicology) as well as other sustainability aspects (such as user benefits) were taken into account in the framework of a so-called 'hot spot analysis'. Furthermore, drivers behind the innovation as well as associated rebound effects were identified. The results highlight the importance of product specific analyses based on a life-cycle thinking approach

Natural resource workshop: Public/private partnership for sustainable use of natural resources

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-01

As part of an effort to shape Federal policy for environmentally sound, sustainable economic development, the White House Office of Science and Technology Policy sponsored a workshop in Boise, Idaho on February 1--2, 1995. The Boise Idaho workshop focused on the sustainable use of natural resources, a topic of considerable interest in Idaho. The workshop gave representatives from industry, academia, research, the public, and local and state government an opportunity to provide input to lawmakers and policymakers for establishing a National Environmental Technology Strategy to be issued by Earth Day, 1995.

Bioenergy, material, and nutrients recovery from household waste: Advanced material, substance, energy, and cost flow analysis of a waste refinery process

DEFF Research Database (Denmark)

Tonini, Davide; Dorini, Gianluca Fabio; Astrup, Thomas Fruergaard

2014-01-01

Energy, materials, and resource recovery from mixed household waste may contribute to reductions in fossil fuel and resource consumption. For this purpose, legislation has been enforced to promote energy recovery and recycling. Potential solutions for separating biogenic and recyclable materials...

Awakened Oscillations in Coupled Consumer-Resource Pairs

Directory of Open Access Journals (Sweden)

Almaz Mustafin

2014-01-01

Full Text Available The paper concerns two interacting consumer-resource pairs based on chemostat-like equations under the assumption that the dynamics of the resource is considerably slower than that of the consumer. The presence of two different time scales enables to carry out a fairly complete analysis of the problem. This is done by treating consumers and resources in the coupled system as fast-scale and slow-scale variables, respectively, and subsequently considering developments in phase planes of these variables, fast and slow, as if they are independent. When uncoupled, each pair has unique asymptotically stable steady state and no self-sustained oscillatory behavior (although damped oscillations about the equilibrium are admitted. When the consumer-resource pairs are weakly coupled through direct reciprocal inhibition of consumers, the whole system exhibits self-sustained relaxation oscillations with a period that can be significantly longer than intrinsic relaxation time of either pair. It is shown that the model equations adequately describe locally linked consumer-resource systems of quite different nature: living populations under interspecific interference competition and lasers coupled via their cavity losses.

Raw material monitoring assists companies. German Mineral Resources Agency at BGR provides information on global developments in resource markets; Rohstoffmonitoring hilft Unternehmen. Die Deutsche Rohstoffagentur in der BGR informiert ueber weltweite Entwicklungen auf den Rohstoffmaerkten

Energy Technology Data Exchange (ETDEWEB)

NONE

2016-05-15

Germany is dependent on imports for its metalliferous natural resources. Although prices have been declining significantly in recent months, numerous raw materials such as platinum, cobalt and rare earth elements continue to be exposed to price and supply risks. To ensure that German industry can respond better to this situation in their procurement activities, the German Mineral Resources Agency (DERA) at BGR has developed a raw material monitoring system on behalf of the German government. DERA experts have con figured a screening method for the early identification of possible procurement risks. This is the platform which enables German companies to gain the specific advice they require. All of the most important information on this issue is bundled within DERA 's internet portal (www.deutsche-rohstoffagentur.de). BGR also provides its expertise in other important fields with great societal relevance. BGR has been advising the national commission on ''Storage of High-level Radioactive Waste'' since 2014. Due to their comprehensive research activities in the field of radioactive waste disposal, BGR scientists are important technical experts to which the commission can turn to for geological information and advice.

Energy impacts of recycling disassembly material in residential buildings

International Nuclear Information System (INIS)

Gao, Weijun; Ariyama, Takahiro; Ojima, Toshio; Meier, Alan

2000-01-01

In order to stop the global warmth due to the CO2 concentration, the energy use should be decreased. The investment of building construction industry in Japan is about 20 percent of GDP. This fraction is much higher than in most developed countries. That results the Japanese building construction industry including residential use consumes about one third of all energy and resources of the entire industrial sectors. In order to save energy as well as resource, the recycle of the building materials should be urgent to be carried out. In this paper, we focus on the potential energy savings with a simple calculated method when the building materials or products are manufactured from recycled materials. We examined three kinds of residential buildings with different construction techniques and estimated the decreased amount of energy consumption and resources resulting from use of recycled materials. The results have shown for most building materials, the energy consumption needed to remake housing materials from recycled materials is lower than that to make new housing materials. The energy consumption of building materials in all case-study housing can be saved by at least 10 percent. At the same time, the resource, measured by mass of building materials (kg) can be decreased by over 50 percent

Legal, regulatory & institutional issues facing distributed resources development

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-10-01

This report describes legal, regulatory, and institutional considerations likely to shape the development and deployment of distributed resources. It is based on research co-sponsored by the National Renewable Energy Laboratory (NREL) and four investor-owned utilities (Central & South West Services, Cinergy Corp., Florida Power Corporation, and San Diego Gas & Electric Company). The research was performed between August 1995 and March 1996 by a team of four consulting firms experienced in energy and utility law, regulation, and economics. It is the survey phase of a project known as the Distributed Resources Institutional Analysis Project.

Dispersion of radioactive material in air and water and consideration of population distribution in site evaluation for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2004-01-01

The IAEA issues Safety Requirements and Safety Guides pertaining to nuclear power plants and activities in the field of nuclear energy, on the basis of its Safety Fundamentals publication on The Safety of Nuclear Installations. The present Safety Guide, which supplements the Code on the Safety of Nuclear Power Plants: Siting, concerns the effects of a nuclear power plant on the surrounding region and the consideration of population distribution in the siting of a plant. This Safety Guide makes recommendations on how to meet the requirements of the Code on the Safety of Nuclear Power Plants: Siting, on the basis of knowledge of the mechanisms for the dispersion of effluents discharged into the atmosphere and into surface water and groundwater. Relevant site characteristics and safety considerations are discussed. Population distribution, the projected population growth rate, particular geographical features, the capabilities of local transport networks and communications networks, industry and agriculture in the region, and recreational and institutional activities in the region should be considered in assessing the feasibility of developing an emergency response plan. In the selection of a site for a facility using radioactive material, such as a nuclear power plant, account should be taken of any local features that might be affected by the facility and of the feasibility of off-site intervention, including emergency response and protective actions. This is in addition to the evaluation of any features of the site itself that might affect the safety of the facility. This Safety Guide recommends methods for the assessment of regional and local characteristics. This Safety Guide supersedes four earlier IAEA Safety Guides, namely: Atmospheric Dispersion in Nuclear Power Plant Siting (Safety Series No. 50-SG-S3 (1980)). Site Selection and Evaluation for Nuclear Power Plants with Respect to Population Distribution (Safety Series No. 50-SG-S4 (1980)). Hydrological

Dispersion of radioactive material in air and water and consideration of population distribution in site evaluation for nuclear power plants. Safety guide

International Nuclear Information System (INIS)

2002-01-01

The IAEA issues Safety Requirements and Safety Guides pertaining to nuclear power plants and activities in the field of nuclear energy, on the basis of its Safety Fundamentals publication on The Safety of Nuclear Installations. The present Safety Guide, which supplements the Code on the Safety of Nuclear Power Plants: Siting, concerns the effects of a nuclear power plant on the surrounding region and the consideration of population distribution in the siting of a plant. This Safety Guide makes recommendations on how to meet the requirements of the Code on the Safety of Nuclear Power Plants: Siting, on the basis of knowledge of the mechanisms for the dispersion of effluents discharged into the atmosphere and into surface water and groundwater. Relevant site characteristics and safety considerations are discussed. Population distribution, the projected population growth rate, particular geographical features, the capabilities of local transport networks and communications networks, industry and agriculture in the region, and recreational and institutional activities in the region should be considered in assessing the feasibility of developing an emergency response plan. In the selection of a site for a facility using radioactive material, such as a nuclear power plant, account should be taken of any local features that might be affected by the facility and of the feasibility of off-site intervention, including emergency response and protective actions. This is in addition to the evaluation of any features of the site itself that might affect the safety of the facility. This Safety Guide recommends methods for the assessment of regional and local characteristics. This Safety Guide supersedes four earlier IAEA Safety Guides, namely: Atmospheric Dispersion in Nuclear Power Plant Siting (Safety Series No. 50-SG-S3 (1980)); Site Selection and Evaluation for Nuclear Power Plants with Respect to Population Distribution (Safety Series No. 50-SG-S4 (1980)); Hydrological

Integrated resource planning - a long and winding road

International Nuclear Information System (INIS)

Reuter, A.L.

1995-01-01

The separation of Croatia from former Yugoslavia and the military turbulence at its borders during the last years caused a number of problems in the Croatian energy system. Resources for improving the situation are scarce. So it is necessary to plan the rehabilitation and modernization of the Croatian energy system in a way which includes all national resources and allocates these resources where they lead to the highest benefits to the national economy. In this paper it is shown that Integrated Resource Planning (IRP) is such a method which enables the rational use of national resources. Also presented in this paper is a transparent and rational procedure which allows the energy planner to support the decision maker in developing an energy policy under consideration of interests of affected groups. This procedure is called Structured Analysis Procedure and step by step leads from the problem formulation to the decision on which action is to be applied to solve the problem. (author)

Free Material Design with Multiple Load Cases

DEFF Research Database (Denmark)

Pedersen, Pauli; Pedersen, Niels Leergaard

2012-01-01

Multiple load cases and the consideration of strength is a reality that most structural designs are exposed to. Improved possibility to produce specific materials, say by fiber lay-up, put focus on research on free material optimization. A formulation for such design problems together with a prac......Multiple load cases and the consideration of strength is a reality that most structural designs are exposed to. Improved possibility to produce specific materials, say by fiber lay-up, put focus on research on free material optimization. A formulation for such design problems together...... with a practical recursive design procedure is presented and illustrated with examples. The presented finite element analysis involve many elements as well as many load cases. Separating the local amount of material from a description with unit trace for the local anisotropy, gives the free materials formulation...... a more physical interpretation of the material constraint....

Computer information resources of inorganic chemistry and materials science

International Nuclear Information System (INIS)

Kiselyova, N N; Dudarev, V A; Zemskov, V S

2010-01-01

Information systems used in inorganic chemistry and materials science are considered. The following basic trends in the development of modern information systems in these areas are highlighted: access to information via the Internet, merging of documental and factual databases, involvement of experts in the evaluation of the data reliability, supplementing databases with information analysis tools on the properties of inorganic substances and materials.

Computer information resources of inorganic chemistry and materials science

Energy Technology Data Exchange (ETDEWEB)

Kiselyova, N N; Dudarev, V A; Zemskov, V S [A.A.Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, Moscow (Russian Federation)

2010-02-28

Information systems used in inorganic chemistry and materials science are considered. The following basic trends in the development of modern information systems in these areas are highlighted: access to information via the Internet, merging of documental and factual databases, involvement of experts in the evaluation of the data reliability, supplementing databases with information analysis tools on the properties of inorganic substances and materials.

Using the CMS high level trigger as a cloud resource

International Nuclear Information System (INIS)

Colling, David; Huffman, Adam; Bauer, Daniela; McCrae, Alison; Cinquilli, Mattia; Gowdy, Stephen; Coarasa, Jose Antonio; Ozga, Wojciech; Chaze, Olivier; Lahiff, Andrew; Grandi, Claudio; Tiradani, Anthony; Sgaravatto, Massimo

2014-01-01

The CMS High Level Trigger is a compute farm of more than 10,000 cores. During data taking this resource is heavily used and is an integral part of the experiment's triggering system. However, outside of data taking periods this resource is largely unused. We describe why CMS wants to use the HLT as a cloud resource (outside of data taking periods) and how this has been achieved. In doing this we have turned a single-use cluster into an agile resource for CMS production computing. While we are able to use the HLT as a production cloud resource, there is still considerable further work that CMS needs to carry out before this resource can be used with the desired agility. This report, therefore, represents a snapshot of this activity at the time of CHEP 2013.

Life Online: Resources for Students with an Intellectual Disability.

Science.gov (United States)

Weeks, Kerri

2001-01-01

Two Australian agencies planned, developed, piloted, and evaluated an online resource for teaching independent living skills to adult students with a mild intellectual disability using technology and the Internet. The resource, called Life Online, is a package of support resource materials tested in regional classrooms in Victoria, Australia.…

Insulating materials from renewable raw materials. 3. upd. ed.; Daemmstoffe aus nachwachsenden Rohstoffen

Energy Technology Data Exchange (ETDEWEB)

Brandhorst, Joerg; Spritzendorfer, Josef; Gildhorn, Kai; Hemp, Markus

2009-07-01

Due to increasing energy prices, obligations to climatic protection and the desire for comfortable, allergy-free living, the thermal insulation is a central question with building and sanitation. Under this aspect, the contribution under consideration describes the very dynamic market of the insulating materials from renewable raw materials and deals with the questions of the users. In particular, the following raw materials are considered in the production of insulating materials: Wood fibre, wood chips, wood wool, sheep wool, flax, hemp, reeds, straw, cellulose.

Resource categories and performance in Portuguese non-profit sports clubs

Directory of Open Access Journals (Sweden)

Marco Arraya

2016-01-01

Full Text Available The resource-based view (RBV explores the role of key resources identified as tangible, personnel-based, and intangible resources in creating superior organizational performance. The RBV posits that an organization’s success is mainly driven by resources that possess Barney’s VRIO (valuable, rare, inimitable, and organized framework. The purpose of this study is to demonstrate the relationship between the three categories of resources and organizational performance. The data was analyzed with a two-stage structural equation modelling approach. The sample included Portuguese sports management staff from non-profit clubs which composed of 375 men and 102 women. The results of the structural model demonstrated that, intangible resources can significantly influence organizational performance while, personnel-based resources influence tangible and intangible resources. The results show that “staff competence”, “reputation”, and “financial capital” were the most essential resources, and that is core for non-profit clubs and their strategy to recognize, develop, and leverage VRIO resources. These findings also have considerable implications for sport managers, and suggestions for possible future research were given.

Economic planning and equilibrium growth of human resources and capital in health-care sector: Case study of Iran

Science.gov (United States)

Mahboobi-Ardakan, Payman; Kazemian, Mahmood; Mehraban, Sattar

2017-01-01

CONTEXT: During different planning periods, human resources factor has been considerably increased in the health-care sector. AIMS: The main goal is to determine economic planning conditions and equilibrium growth for services level and specialized workforce resources in health-care sector and also to determine the gap between levels of health-care services and specialized workforce resources in the equilibrium growth conditions and their available levels during the periods of the first to fourth development plansin Iran. MATERIALS AND METHODS: In the study after data collection, econometric methods and EViews version 8.0 were used for data processing. The used model was based on neoclassical economic growth model. RESULTS: The results indicated that during the former planning periods, although specialized workforce has been increased significantly in health-care sector, lack of attention to equilibrium growth conditions caused imbalance conditions for product level and specialized workforce in health-care sector. CONCLUSIONS: In the past development plans for health services, equilibrium conditions based on the full employment in the capital stock, and specialized labor are not considered. The government could act by choosing policies determined by the growth model to achieve equilibrium level in the field of human resources and services during the next planning periods. PMID:28616419

mockrobiota: a Public Resource for Microbiome Bioinformatics Benchmarking.

Science.gov (United States)

Bokulich, Nicholas A; Rideout, Jai Ram; Mercurio, William G; Shiffer, Arron; Wolfe, Benjamin; Maurice, Corinne F; Dutton, Rachel J; Turnbaugh, Peter J; Knight, Rob; Caporaso, J Gregory

2016-01-01

Mock communities are an important tool for validating, optimizing, and comparing bioinformatics methods for microbial community analysis. We present mockrobiota, a public resource for sharing, validating, and documenting mock community data resources, available at http://caporaso-lab.github.io/mockrobiota/. The materials contained in mockrobiota include data set and sample metadata, expected composition data (taxonomy or gene annotations or reference sequences for mock community members), and links to raw data (e.g., raw sequence data) for each mock community data set. mockrobiota does not supply physical sample materials directly, but the data set metadata included for each mock community indicate whether physical sample materials are available. At the time of this writing, mockrobiota contains 11 mock community data sets with known species compositions, including bacterial, archaeal, and eukaryotic mock communities, analyzed by high-throughput marker gene sequencing. IMPORTANCE The availability of standard and public mock community data will facilitate ongoing method optimizations, comparisons across studies that share source data, and greater transparency and access and eliminate redundancy. These are also valuable resources for bioinformatics teaching and training. This dynamic resource is intended to expand and evolve to meet the changing needs of the omics community.

The Resource Control Debate: Enthroning Parasitism or Instituting ...

African Journals Online (AJOL)

User

ISSN 1994-9057 (Print). ISSN 2070--0083 (Online) ... considering materials as resources, it is imperative that the useful purpose of satisfying human needs in ..... advantage to the region in terms of resource allocation. The North it is argued has ...

Sustainable Materials Management (SMM) Web Academy Webinar: Changing How We Think About Our Resources for a Better Tomorrow: How to Donate Surplus Food from K-12 Schools

Science.gov (United States)

This is a webinar page for the Sustainable Management of Materials (SMM) Web Academy webinar titled Changing How We Think About Our Resources for a Better Tomorrow: How to Donate Surplus Food from K-12 Schools

Material properties requirements for LMFBR structural design: General considerations and data needs

Energy Technology Data Exchange (ETDEWEB)

Pugh, C E [Oak Ridge National Laboratory, Oak Ridge, TN (United States); Purdy, C M [U.S. Energy Research and Development Administration (United States)

1977-07-01

A statement is given of material properties information needed in connection with the structural design technology for liquid-metal fast breeder reactor (LMFBR) primary circuit components. Implementation of current analysis methods and criteria is considered with an emphasis on data and data correlations for performing elastic-plastic and creep analyses, for establishing allowable stress limits, and for computing creep-fatigue damage. Further development of the technology is discussed in relation to properties information. Emphasis is placed on improved constitutive equations for representing inelastic material behavior, on procedures for treating time-dependent fatigue, and on criteria for creep rupture. The properties are generally discussed without regard to specific alloys, since most categories of information are needed for each major structural material. Some sample experimental results are given for type 304 stainless steel and 2 1/4 Cr-1 Mo steel. (author)

Material properties requirements for LMFBR structural design: general considerations and data needs

International Nuclear Information System (INIS)

Pugh, C.E.; Purdy, C.M.

1977-01-01

A statement is given of material properties information needed in connection with the structural design technology for liquid-metal fast breeder reactor (LMFBR) primary circuit components. Implementation of current analysis methods and criteria is considered with an emphasis on data and data correlations for performing elastic-plastic and creep analyses, for establishing allowable stress limits, and for computing creep-fatigue damage. Further development of the technology is discussed in relation to properties information. Emphasis is placed on improved constitutive equations for representing inelastic material behavior, on procedures for treating time-dependent fatigue, and on criteria for creep rupture. The properties are generally discussed without regard to specific alloys, since most categories of information are needed for each major structural material. Some sample experimental results are given for type 304 stainless steel and 2 1 / 4 Cr-1 Mo steel

Phase change materials handbook

Science.gov (United States)

Hale, D. V.; Hoover, M. J.; Oneill, M. J.

1971-01-01

This handbook is intended to provide theory and data needed by the thermal design engineer to bridge the gap between research achievements and actual flight systems, within the limits of the current state of the art of phase change materials (PCM) technology. The relationship between PCM and more conventional thermal control techniques is described and numerous space and terrestrial applications of PCM are discussed. Material properties of the most promising PCMs are provided; the purposes and use of metallic filler materials in PCM composites are presented; and material compatibility considerations relevant to PCM design are included. The engineering considerations of PCM design are described, especially those pertaining to the thermodynamic and heat transfer phenomena peculiar to PCM design. Methods of obtaining data not currently available are presented. The special problems encountered in the space environment are described. Computational tools useful to the designer are discussed. In summary, each aspect of the PCM problem important to the design engineer is covered to the extent allowed by the scope of this effort and the state of the art.

Helping HELP with limited resources: the Luquillo experience

Science.gov (United States)

F.N. Scatena; JR Ortiz-Zayas; J.F. Blanco-Libreros

2008-01-01

By definition the HELP approach involves the active participation of individuals from a wide range of disciplines and backgrounds, including representatives of industry, academics, natural resource managers, and local officials and community leaders. While there is considerable enthusiasm and support for the integrated HELP approach, a central problem for all HELP...

Wood preservatives and pressure-treated wood: considerations for historic-preservation projects

Science.gov (United States)

Ronald W. Anthony; Stan T. Lebow

2015-01-01

Wood, an abundant resource throughout most of the world, has been used as a building material for thousands of years. Many historic buildings have been built primarily of wood, and masonry and stone buildings generally have wood elements, both structural and architectural. As a biological material, wood is both remarkably complex and yet quite durable if well...

Machinability of advanced materials

CERN Document Server

Davim, J Paulo

2014-01-01

Machinability of Advanced Materials addresses the level of difficulty involved in machining a material, or multiple materials, with the appropriate tooling and cutting parameters.  A variety of factors determine a material's machinability, including tool life rate, cutting forces and power consumption, surface integrity, limiting rate of metal removal, and chip shape. These topics, among others, and multiple examples comprise this research resource for engineering students, academics, and practitioners.

Reflections on prospective raw materials and materials with regard to the Czech Republic

International Nuclear Information System (INIS)

Schejbal, C.; Palas, M.

1997-01-01

Reflections on prospective mineral raw materials and materials must rest upon the expected demographic evolution, the evaluation of economic development and the development of manufacturing technologies and materials corresponding to them, trends in the consumption of mineral raw materials and possibilities of securing them. The evaluation of the given factors under conditions of the Czech Republic shows that one of the decisive prerequisites to transforming the Czech economy is to assure the fuel and energy security of the state. In addition to emphasis put on traditional and newly developed technologies of utilization of domestic resources of coal and the development of nuclear power, a diversification of supplies of oil and gas is necessary. Moreover, it is necessary to ensure domestic resources of raw materials to some prospective material areas, or to provide these raw materials by means of imports and/or entrepreneurial activity abroad. As far as raw materials for building and industrial rocks are concerned, it is necessary to support the exploitation and home utilization through laws and suitable economic tools at respecting environmental limitations. With non-traditional prospective raw materials, it will be desirable to promote exploration and mining especially in those cases when a precondition exists for the securing of sufficient reserves or when reserves are already known

The survival of the conformist: social pressure and renewable resource management.

Science.gov (United States)

Tavoni, Alessandro; Schlüter, Maja; Levin, Simon

2012-04-21

This paper examines the role of other-regarding behavior as a mechanism for the establishment and maintenance of cooperation in resource use under variable social and environmental conditions. By coupling resource stock dynamics with social dynamics concerning compliance to a social norm prescribing non-excessive resource extraction in a common pool resource, we show that when reputational considerations matter and a sufficient level of social stigma affects the violators of a norm, sustainable outcomes are achieved. We find large parameter regions where norm-observing and norm-violating types coexist, and analyze to what extent such coexistence depends on the environment. Copyright © 2011 Elsevier Ltd. All rights reserved.

Dynamic Land Resources Management at the Mount Kelud, Indonesia

Directory of Open Access Journals (Sweden)

Puspita Indra Wardhani

2017-07-01

Full Text Available There is a contradictive situation between the theory that believes that high volcanic hazard areas should be for limited production zones and those areas that are intensively utilised for several production activities. This paper tries to discuss that contradictive situation from both the perspective of natural hazards and natural resources, therefore, the best options for the land utilisation pattern might be formulated at these high volcanic hazards areas. We conducted landscape analysis that covers volcanic morphology, volcanic materials, and both natural and artificial processes that modify the morphology and materials characteristics. The natural processes occurring in the high volcanic hazard might cover non-volcanic processes such as erosion and landslide. The artificial processes were usually considered as land utilisation activities by the local community. In such areas where both natural and artificial processes occurred, we conducted in-depth interviews to assess the community perception on thread and benefits of the last Kelud Eruption in February 2014. We evaluated the current land resources utilisation and portrayed the local adaptive land resource utilisation. There were three types of land resources available at the active volcano: space, natural scenery, and volcanic materials. The availability of these land resources was in a dynamic condition both in terms of quality and quantity. Immediately after the eruption, the natural scenery made the area attractive as a tourist destination. Following the high intensity of rainfall, the volcanic materials might be used as high-quality construction materials. The available space might be utilised for any purposes after the situation became relatively stable. The current space was mostly used for agricultural enterprises which accommodates the physical and socio-cultural characteristics of the active volcano environment.

The materiality of materials and artefacts used in science classrooms

DEFF Research Database (Denmark)

Cowie, Bronwen; Otrel-Cass, Kathrin; Moreland, Judy

Material objects and artefacts receive limited attention in science education (Roehl, 2012) though they shape emerging interactions. This is surprising given science has material and a social dimensions (Pickering, 1995) whereby new knowledge develops as a consensus explanation of natural phenomena...... that is mediated significantly through materials and instruments used. Here we outline the ways teachers deployed material objects and artefacts by identifying their materiality to provide scenarios and resources (Roth, 2005) for interactions. Theoretical framework We use Ingold's (2011) distinction between...... materials as natural objects in this world and artefacts as manmade objects. We are aware that in a classroom material objects and artefacts shape, and are shaped by classroom practice through the way they selectively present scientific explanations. However, materials and artefacts have no intrinsic...

Final Environmental Impact Statement Resource Programs

International Nuclear Information System (INIS)

1993-02-01

BPA's preferred alternative is the Emphasize Conservation Alternative. System and environmental costs are low. Environmental impacts from conservation are minimal. This alternative is cost-effective and environmentally responsible; only the High Conservation Alternative has lower costs and fewer environmental impacts. However, there is some concern about the cost-effectiveness, reliability, and commercial availability of the high conservation resources. If the supply of the additional conservation potential was confirmed and it became cost-effective, the High Conservation Alternative would be preferred. The Draft Resource Programs EIS was released for public review during the summer of 1992. Comments received by letter or in the public hearing held June 16, 1992, were used to revise and update data and analyses of the EIS (public comments and BPA's responses are contained in Volume III of the Final EIS). In addition, a number of revisions were made in the Chapter 3 material describing each resource type, and in Chapter 4 and the Summary, to assure consistency with the modeling and analysis in Chapter 5. Additional information about the capacity aspects of each resource type and alternative has been added, and the material on conservation and its impacts has been reorganized

Marxism--Leninism and natural resources: the Soviet outlook

Energy Technology Data Exchange (ETDEWEB)

Papp, D.S.

1977-06-01

Soviet leaders recognize that natural resources are finite, but they do not share the pessimism of many of their Western counterparts. They maintain that resource depletion is not a threat to be taken seriously on a worldwide basis, but rather is a manifestation of the capitalism. To understand both the continued Soviet optimism and the Soviet assessment of why the Western world is experiencing its current ''raw material crisis'', the author examines the role that natural resources play within Marxist-Leninist idealogy. Soviets believe, the author says, that the resource predicament is insoluble; that the condition will escalate until, along with several other factors, the situation will result in a worldwide socialist society. Western thought has advocated fine methods through which the industrialized world could evade the energy and raw materials shortages. These include new methods of mining, developing, and searching for natural resource deposits; setting up a non-socialist industrial nations' organization; appropriation of resource sites; zero growth rates; and genuine cooperation. The Kremlin discounts the West's ability to successfully carry out any of these solutions. (MCW)

Standard test method for nondestructive assay of special nuclear material holdup using Gamma-Ray spectroscopic methods

CERN Document Server

American Society for Testing and Materials. Philadelphia

2007-01-01

1.1 This test method describes gamma-ray methods used to nondestructively measure the quantity of 235U, or 239Pu remaining as holdup in nuclear facilities. Holdup occurs in all facilities where nuclear material is processed, in process equipment, in exhaust ventilation systems and in building walls and floors. 1.2 This test method includes information useful for management, planning, selection of equipment, consideration of interferences, measurement program definition, and the utilization of resources (1, 2, 3, 4). 1.3 The measurement of nuclear material hold up in process equipment requires a scientific knowledge of radiation sources and detectors, transmission of radiation, calibration, facility operations and error analysis. It is subject to the constraints of the facility, management, budget, and schedule; plus health and safety requirements; as well as the laws of physics. The measurement process includes defining measurement uncertainties and is sensitive to the form and distribution of the material...

Institutional economy applied to the Natural Resources

International Nuclear Information System (INIS)

Aguilera klink, Federico

1999-01-01

The author intend to show how the perspective of institutional economy, worried about natural resources and the environment, insists in the necessity of a conceptual reconstruction of the concept of economy. This proposal is presented by considering three main aspects essentials for that reconstruction: a) The displacement of the philosophical assumptions of XVIII and XIX countries, b) Reformulation a widening of the meaning of the basic concepts and c) How to complement the marked price analysis with the consideration of social values. After analyzing these aspects it is show how they are applied to the study of natural resources and environmental problems through the notion of social costs

Safety considerations of lithium lead alloy as a fusion reactor breeding material

International Nuclear Information System (INIS)

Jeppson, D.W.; Muhlestein, L.D.

1985-01-01

Test results and conclusions are presented for lithium lead alloy interactions with various gas atmospheres, concrete and potential reactor coolants. The reactions are characterized to evaluate the potential of volatilizing and transporting radioactive species associated with the liquid breeder under postulated fusion reactor accident conditions. The safety concerns identified for lithium lead alloy reactions with the above materials are compared to those previously identified for a reference fusion breeder material, liquid lithium. Conclusions made from this comparison are also included

National uranium resource evaluation, preliminary report

International Nuclear Information System (INIS)

1976-06-01

The results of the initial phase of the National Uranium Resource Evaluation (NURE) are reported. NURE is a comprehensive nationwide program to evaluate uranium resources and to identify areas favorable for uranium exploration. Part I presents estimates of uranium ore reserves and potential resources available at costs (not prices) of $10, $15, and $30 per pound U 3 O 8 (uranium oxide). These estimates comprise the national uranium resource position. They are, however, preliminary because limitations of time and available geologic data prevented adequate assessment of some areas that may be favorable for potential resources. Part II presents the potential uranium resources for each of 13 regions, whose boundaries have been drawn chiefly on geologic considerations. The general geology is summarized, and the types of uranium deposits are described. Although limited geologic reconnaissance was done in various parts of the country, the report is based primarily on the compilation and evaluation of data in ERDA files. Mining companies furnished a substantial amount of information on exploration results, development, production, and future plans. Published, manuscript, and open-file reports by government agencies, universities, and research organizations were reviewed. In addition, many individuals affiliated with universities and with state and federal agencies provided supplemental geologic information. This was particularly helpful in the eastern and central states and in Alaska, where information on uranium occurrences is limited

Preliminary Design of Industrial Symbiosis of Smes Using Material Flow Cost Accounting (MFCA) Method

Science.gov (United States)

Astuti, Rahayu Siwi Dwi; Astuti, Arieyanti Dwi; Hadiyanto

2018-02-01

Industrial symbiosis is a collaboration of several industries to share their necessities such material, energy, technology as well as waste management. As a part of industrial ecology, in principle, this system attempts to emulate ecosystem where waste of an organism is being used by another organism, therefore there is no waste in the nature. This system becomes an effort to optimize resources (material and energy) as well as minimize waste. Considerable, in a symbiosis incure material and energy flows among industries. Material and energy in an industry are known as cost carriers, thus flow analysis in this system can be conducted in perspective of material, energy and cost, or called as material flow cost accounting (MFCA) that is an economic and ecological appraisal approach. Previous researches shown that MFCA implementation could be used to evaluate an industry's environmental-related efficiency as well as in planning, business control and decision making. Moreover, the MFCA has been extended to assess environmental performance of SMEs Cluster or industrial symbiosis in SMEs Cluster, even to make preliminary design of an industrial symbiosis base on a major industry. This paper describes the use of MFCA to asses performance of SMEs industrial symbiosis and to improve the performance.

Preliminary Design of Industrial Symbiosis of Smes Using Material Flow Cost Accounting (MFCA Method

Directory of Open Access Journals (Sweden)

Siwi Dwi Astuti Rahayu

2018-01-01

Full Text Available Industrial symbiosis is a collaboration of several industries to share their necessities such material, energy, technology as well as waste management. As a part of industrial ecology, in principle, this system attempts to emulate ecosystem where waste of an organism is being used by another organism, therefore there is no waste in the nature. This system becomes an effort to optimize resources (material and energy as well as minimize waste. Considerable, in a symbiosis incure material and energy flows among industries. Material and energy in an industry are known as cost carriers, thus flow analysis in this system can be conducted in perspective of material, energy and cost, or called as material flow cost accounting (MFCA that is an economic and ecological appraisal approach. Previous researches shown that MFCA implementation could be used to evaluate an industry’s environmental-related efficiency as well as in planning, business control and decision making. Moreover, the MFCA has been extended to assess environmental performance of SMEs Cluster or industrial symbiosis in SMEs Cluster, even to make preliminary design of an industrial symbiosis base on a major industry. This paper describes the use of MFCA to asses performance of SMEs industrial symbiosis and to improve the performance.

Design principles for global commons: Natural resources and emerging technologies

Directory of Open Access Journals (Sweden)

Paul C. Stern

2011-09-01

Full Text Available Ostrom’s design principles for managing common pool resources were developed largely by examining local commons involving natural resources. This paper enumerates several key characteristics that distinguish such commons from more complex commons involving global resources and the risks of emerging technologies. It considers the degree to which the design principles transfer to those commons and concludes that although they have considerable external validity, the list needs some modification and elaboration to apply to global resources and risk commons. A list of design principles is offered for global resource commons and the risks of emerging technologies. Applying Ostrom’s approach to global resources and emerging technologies can improve understanding and expand the solution set for these problems from international treaties, top-down national regulation, and interventions in market pricing systems to include non-governmental institutions that embody principles of self-governance.

Valuation of ecological resources

Energy Technology Data Exchange (ETDEWEB)

Scott, M.J.; Bilyard, G.R.; Link, S.O.; Ricci, P.F.; Seely, H.E.; Ulibarri, C.A.; Westerdahl, H.E.

1995-04-01

Ecological resources are resources that have functional value to ecosystems. Frequently, these functions are overlooked in terms of the value they provide to humans. Environmental economics is in search of an appropriate analysis framework for such resources. In such a framework, it is essential to distinguish between two related subsets of information: (1) ecological processes that have intrinsic value to natural ecosystems; and (2) ecological functions that are values by humans. The present study addresses these concerns by identifying a habitat that is being displaced by development, and by measuring the human and ecological values associated with the ecological resources in that habitat. It is also essential to determine which functions are mutually exclusive and which are, in effect, complementary or products of joint production. The authors apply several resource valuation tools, including contingent valuation methodology (CVM), travel cost methodology (TCM), and hedonic damage-pricing (HDP). One way to derive upper-limit values for more difficult-to-value functions is through the use of human analogs, because human-engineered systems are relatively inefficient at supplying the desired services when compared with natural systems. Where data on the relative efficiencies of natural systems and human analogs exist, it is possible to adjust the costs of providing the human analog by the relative efficiency of the natural system to obtain a more realistic value of the function under consideration. The authors demonstrate this approach in an environmental economic case study of the environmental services rendered by shrub-steppe habitats of Benton County, Washington State.

Australia's Uranium and thorium resources and their global significance

International Nuclear Information System (INIS)

Lambert, I.B.; McKay, A.; Miezitis, Y.

2006-01-01

Full text: Full text: Australia's world-leading uranium endowment appears to result from the emplacement of uranium enriched felsic igneous rocks in three major periods during the geological evolution of the continent. Australia has over 27% of the world's total reasonably assured uranium resources (RAR) recoverable at < US$80/kgU (which approximates recent uranium spot prices). Olympic Dam is the largest known uranium deposit, containing approximately 19% of global RAR (and over 40% of global inferred resources) recoverable at < US$80/kg U; the uranium is present at low concentrations and the viability of its recovery is underpinned by co-production of copper and gold. Most of Australia's other identified resources are within Ranger, Jabiluka, Koongarra, Kintyre and Yeelirrie, the last four of which are not currently accessible for mining. In 2004, Australia's three operating uranium mines - Ranger, Olympic Dam, and Beverley -produced 22% of global production. Canada was the only country to produce more uranium (29%) and Kazakhstan (9%) ranked third. Considerably increased uranium production has been recently foreshadowed from Australia (through developing a large open pit at Olympic Dam), Canada (mainly through opening of the Cigar Lake mine), and Kazakhstan (developing several new in situ leach mines). These increases should go a long way towards satisfying demand from about 2010. Olympic Dam has sufficient resources to sustain such increased production over many decades. Thorium is expected to be used in some future generations of nuclear reactors. Australia also has major (but incompletely quantified) resources of this commodity, mainly in heavy mineral sands deposits and associated with alkaline igneous rocks. It is inevitable that the international community will be looking increasingly to Australia to sustain its vital role in providing fuels for future nuclear power generation, given its world-leading identified resources, considerable potential for new

Responsible resource management in hotels : attitudes, indicators, tools and strategies

OpenAIRE

Bohdanowicz, Paulina

2006-01-01

Hotels constitute one of the main, and still expanding, pillars of the tourism sector and are highly unique among other commercial buildings. Resource intensive and frequently inefficient systems and operational routines applied in the sector, result in considerable environmental impact and indicate an urgent need for more environmentally sound practices and products in the hotel industry. A certain level of activity in the area of reducing resource use has been observed for quite some time b...

Researching Social Capital in Education: Some Conceptual Considerations Relating to the Contribution of Network Analysis

Science.gov (United States)

Lee, Moosung

2010-01-01