WorldWideScience

Sample records for mass support system

  1. A cold mass support system based on the use of oriented fiberglass epoxy rods in bending

    International Nuclear Information System (INIS)

    Green, Michael A.; Corradi, Carol A.; LaMantia, Roberto F.; Zbasnik, Jon P.

    2002-01-01

    This report describes a cold mass support system that uses oriented fiberglass epoxy (other low heat leak oriented fiber material can also be used) rods. In the direction of the rods, where forces are carried in tension or compression, the support system is very stiff. In the other directions, the rods are subjected to bending stresses. When the support rods are put in bending the cold mass support is quite compliant. This type of support system can be used in situation where space for a cold mass support system is limited and where compliance can be tolerated in at least one direction. Break test data for 15.9-mm and 19.1-mm diameter oriented fiberglass rods is presented in this report. The cold mass supports for the DFBX distribution boxes are presented as an example of this type of cold mass support system

  2. Mass balances for a biological life support system simulation model

    Science.gov (United States)

    Volk, Tyler; Rummel, John D.

    1987-01-01

    Design decisions to aid the development of future space based biological life support systems (BLSS) can be made with simulation models. The biochemistry stoichiometry was developed for: (1) protein, carbohydrate, fat, fiber, and lignin production in the edible and inedible parts of plants; (2) food consumption and production of organic solids in urine, feces, and wash water by the humans; and (3) operation of the waste processor. Flux values for all components are derived for a steady state system with wheat as the sole food source. The large scale dynamics of a materially closed (BLSS) computer model is described in a companion paper. An extension of this methodology can explore multifood systems and more complex biochemical dynamics while maintaining whole system closure as a focus.

  3. Life Support Goals Including High Closure and Low Mass Should Be Reconsidered Using Systems Analysis

    Science.gov (United States)

    Jones, Harry W.

    2017-01-01

    Recycling space life support systems have been built and tested since the 1960s and have operated on the International Space Station (ISS) since the mid 2000s. The development of space life support has been guided by a general consensus focused on two important related goals, increasing system closure and reducing launch mass. High closure is achieved by recycling crew waste products such as carbon dioxide and condensed humidity. Recycling directly reduces the mass of oxygen and water for the crew that must be launched from Earth. The launch mass of life support can be further reduced by developing recycling systems with lower hardware mass and reduced power. The life support consensus has also favored using biological systems. The goal of increasing closure using biological systems suggests that food should be grown in space and that biological processors be used for air, water, and waste recycling. The goal of reducing launch mass led to use of Equivalent System Mass (ESM) in life support advocacy and technology selection. The recent consensus assumes that the recycling systems architecture developed in the 1960s and implemented on ISS will be used on all future long missions. NASA and other project organizations use the standard systems engineering process to guide hardware development. The systems process was used to develop ISS life support, but it has been less emphasized in planning future systems for the moon and Mars. Since such missions are far in the future, there has been less immediate need for systems engineering analysis to consider trade-offs, reliability, and Life Cycle Cost (LCC). Preliminary systems analysis suggests that the life support consensus concepts should be revised to reflect systems engineering requirements.

  4. The Cold Mass Support System and the Helium Cooling System for the MICE Focusing Solenoid

    International Nuclear Information System (INIS)

    Yang, Stephanie Q.; Green, Michael A.; Lau, Wing W.; Senanayake, Rohan S.; Witte, Holger

    2006-01-01

    The heart of the absorber focus coil (AFC) module for the muon ionization cooling experiment (MICE) is the two-coil superconducting solenoid that surrounds the muon absorber. The superconducting magnet focuses the muons that are cooled using ionization cooling, in order to improve the efficiency of cooling. The coils of the magnet may either be run in the solenoid mode (both coils operate at the same polarity) or the gradient (the coils operate at opposite polarity). The AFC magnet cold mass support system is designed to carry a longitudinal force up to 700 kN. The AFC module will be cooled using three pulse tube coolers that produce 1.5 W of cooling at 4.2 K. One of the coolers will be used to cool the liquid (hydrogen or helium) absorber used for ionization cooling. The other two coolers will cool the superconducting solenoid. This report will describe the MICE AFC magnet. The cold mass supports will be discussed. The reasons for using a pulsed tube cooler to cool this superconducting magnet will also be discussed

  5. The Mass Tracking System -- Computerized support for MC and A and operations at FCF

    International Nuclear Information System (INIS)

    Adams, C.H.; Beitel, J.C.; Birgersson, G.; Bucher, R.G.; Derstine, K.L.; Toppel, B.J.; Goin, R.W.; Keyes, R.W.; Vollmer, M.A.

    1996-01-01

    As part of Argonne National Laboratory's Fuel Conditioning Facility (FCF), a computer-based Mass-Tracking (MTG) System has been developed. The MTG System collects, stores, retrieves and processes data on all operations which directly affect the flow of process material through FCF and supports such activities as process modeling, compliance with operating limits (e.g., criticality safety), material control and accountability and operational information services. Its architecture is client/server, with input and output connections to operator's equipment-control stations on the floor of FCF as well as to dumb terminals and terminal emulators. Its heterogeneous database includes a relational-database manager as well as both binary and ASCII data files. The design of the database, and the software that supports it, is based on a model of discrete accountable items distributed in space and time and constitutes a complete historical record of the material processed in FCF. Although still under development, much of the MTG system has been qualified and is in production use

  6. Stress on Cold Mass Due to the Supporting System of the CMS Coil in the Vacuum Tank

    CERN Document Server

    Farinon, S

    2000-01-01

    This report contains a verification analysis of the stress on cold mass coming from the supporting system of the CMS coil in the vacuum tank. The need to carry out this analysis is related to the high mechanical requirements for $9 Al-alloy mandrels (218 MPa yield at cryogenic temperature), demanding accurate analysis of the impact of supporting system on cylinder stress.

  7. Would Current International Space Station (ISS) Recycling Life Support Systems Save Mass on a Mars Transit?

    Science.gov (United States)

    Jones, Harry W.

    2017-01-01

    The oxygen and water are recycled on the International Space Station (ISS) to save the cost of launching their mass into orbit. Usually recycling systems are justified by showing that their launch mass would be much lower than the mass of the oxygen or water they produce. Short missions such as Apollo or space shuttle directly provide stored oxygen and water, since the needed total mass of oxygen and water is much less than that of there cycling equipment. Ten year or longer missions such as the ISS or a future moon base easily save mass by recycling while short missions of days or weeks do not. Mars transit and long Mars surface missions have an intermediate duration, typically one to one and a half years. Some of the current ISS recycling systems would save mass if used on a Mars transit but others would not.

  8. Decision-support information system to manage mass casualty incidents at a level 1 trauma center.

    Science.gov (United States)

    Bar-El, Yaron; Tzafrir, Sara; Tzipori, Idan; Utitz, Liora; Halberthal, Michael; Beyar, Rafael; Reisner, Shimon

    2013-12-01

    Mass casualty incidents are probably the greatest challenge to a hospital. When such an event occurs, hospitals are required to instantly switch from their routine activity to conditions of great uncertainty and confront needs that exceed resources. We describe an information system that was uniquely designed for managing mass casualty events. The web-based system is activated when a mass casualty event is declared; it displays relevant operating procedures, checklists, and a log book. The system automatically or semiautomatically initiates phone calls and public address announcements. It collects real-time data from computerized clinical and administrative systems in the hospital, and presents them to the managing team in a clear graphic display. It also generates periodic reports and summaries of available or scarce resources that are sent to predefined recipients. When the system was tested in a nationwide exercise, it proved to be an invaluable tool for informed decision making in demanding and overwhelming situations such as mass casualty events.

  9. Analysis of rock mass dynamic impact influence on the operation of a powered roof support control system

    Science.gov (United States)

    Szurgacz, Dawid; Brodny, Jaroław

    2018-01-01

    A powered roof support is a machine responsible for protection of an underground excavation against deformation generated by rock mass. In the case of dynamic impact of rock mass, the proper level of protection is hard to achieve. Therefore, the units of the roof support and its components are subject to detailed tests aimed at acquiring greater reliability, efficiency and efficacy. In the course of such test, however, it is not always possible to foresee values of load that may occur in actual conditions. The article presents a case of a dynamic load impacting the powered roof support during a high-energy tremor in an underground hard coal mine. The authors discuss the method for selecting powered roof support units proper for specific forecasted load conditions. The method takes into account the construction of the support and mining and geological conditions of an excavation. Moreover, the paper includes tests carried out on hydraulic legs and yield valves which were responsible for additional yielding of the support. Real loads impacting the support unit during tremors are analysed. The results indicated that the real registered values of the load were significantly greater than the forecasted values. The analysis results of roof support operation during dynamic impact generated by the rock mass (real life conditions) prompted the authors to develop a set of recommendations for manufacturers and users of powered roof supports. These include, inter alia, the need for innovative solutions for testing hydraulic section systems.

  10. A Universal Velocity Dispersion Profile for Pressure Supported Systems: Evidence for MONDian Gravity across Seven Orders of Magnitude in Mass

    Energy Technology Data Exchange (ETDEWEB)

    Durazo, R.; Hernandez, X.; Sánchez, S. F. [Instituto de Astronomía, Universidad Nacional Autónoma de México, Apartado Postal 70-264 C.P. 04510 México D.F., México (Mexico); Sodi, B. Cervantes [Instituto de Radioastronomía y Astrofísica, Universidad Nacional Autónoma de México, Campus Morelia, A.P. 3-72, C.P. 58089 Michoacán, México (Mexico)

    2017-03-10

    For any MONDian extended theory of gravity where the rotation curves of spiral galaxies are explained through a change in physics rather than the hypothesis of dark matter, a generic dynamical behavior is expected for pressure supported systems: an outer flattening of the velocity dispersion profile occurring at a characteristic radius, where both the amplitude of this flat velocity dispersion and the radius at which it appears are predicted to show distinct scalings with the total mass of the system. By carefully analyzing the dynamics of globular clusters and elliptical galaxies, we are able to significantly extend the astronomical diversity of objects in which MONDian gravity has been tested, from spiral galaxies to the much larger mass range covered by pressure supported systems. We show that a universal projected velocity dispersion profile accurately describes various classes of pressure supported systems, and further, that the expectations of extended gravity are met across seven orders of magnitude in mass. These observed scalings are not expected under dark matter cosmology, and would require particular explanations tuned at the scales of each distinct astrophysical system.

  11. Life cycle inventory and mass-balance of municipal food waste management systems: Decision support methods beyond the waste hierarchy.

    Science.gov (United States)

    Edwards, Joel; Othman, Maazuza; Crossin, Enda; Burn, Stewart

    2017-11-01

    When assessing the environmental and human health impact of a municipal food waste (FW) management system waste managers typically rely on the principles of the waste hierarchy; using metrics such as the mass or rate of waste that is 'prepared for recycling,' 'recovered for energy,' or 'sent to landfill.' These metrics measure the collection and sorting efficiency of a waste system but are incapable of determining the efficiency of a system to turn waste into a valuable resource. In this study a life cycle approach was employed using a system boundary that includes the entire waste service provision from collection to safe end-use or disposal. A life cycle inventory of seven waste management systems was calculated, including the first service wide inventory of FW management through kitchen in-sink disposal (food waste disposer). Results describe the mass, energy and water balance of each system along with key emissions profile. It was demonstrated that the energy balance can differ significantly from its' energy generation, exemplified by mechanical biological treatment, which was the best system for generating energy from waste but only 5 th best for net-energy generation. Furthermore, the energy balance of kitchen in-sink disposal was shown to be reduced because 31% of volatile solids were lost in pre-treatment. The study also confirmed that higher FW landfill diversion rates were critical for reducing many harmful emissions to air and water. Although, mass-balance analysis showed that the alternative end-use of the FW material may still contain high impact pollutants. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

  12. Minimum critical mass systems

    International Nuclear Information System (INIS)

    Dam, H. van; Leege, P.F.A. de

    1987-01-01

    An analysis is presented of thermal systems with minimum critical mass, based on the use of materials with optimum neutron moderating and reflecting properties. The optimum fissile material distributions in the systems are obtained by calculations with standard computer codes, extended with a routine for flat fuel importance search. It is shown that in the minimum critical mass configuration a considerable part of the fuel is positioned in the reflector region. For 239 Pu a minimum critical mass of 87 g is found, which is the lowest value reported hitherto. (author)

  13. Feasible way of Human Solid and Liquid Wastes' Inclusion Into Intersystem Mass Exchange of Biological-Technical Life Support Systems

    Science.gov (United States)

    Ushakova, Sofya; Tikhomirov, Alexander A.; Tikhomirova, Natalia; Kudenko, Yurii; Griboskaya, Illiada; Gros, Jean-Bernard; Lasseur, Christophe

    The basic objective arising at use of mineralized human solid and liquid wastes serving as the source of mineral elements for plants cultivation in biological-technical life support systems appears to be NaCl presence in them. The given work is aimed at feasibility study of mineralized human metabolites' utilization for nutrient solutions' preparation for their further employment at a long-term cultivation of uneven-aged wheat and Salicornia europaea L. cenosis in a conveyer regime. Human solid and liquid wastes were mineralized by the "wet incineration" method developed by Yu. Kudenko. On their base the solutions were prepared which were used for cultivation of 5-aged wheat conveyer with the time step-interval of 14 days. Wheat was cultivated by hydroponics method on expanded clay aggregate. For partial demineralization of nutrient solution every two weeks after regular wheat harvesting 12 L of solution was withdrawn from the wheat irrigation tank and used for Salicornia europaea cultivation by the water culture method in a conveyer regime. The Salicornia europaea conveyer was represented by 2 ages with the time step-interval of 14 days. Resulting from repeating withdrawal of the solution used for wheat cultivation, sodium concentration in the wheat irrigation solution did not exceed 400 mg/l, and mineral elements contained in the taken solution were used for Salicornia europaea cultivation. The experiment lasted 7 months. Total wheat biomass productivity averaged 30.1 g*m-2*day-1 at harvest index equal to 36.8The work was carried out under support of SB RAS grant 132 and INTAS 05-1000008-8010

  14. Mass transport in thin supported silica membranes

    NARCIS (Netherlands)

    Benes, Nieck Edwin

    2000-01-01

    In this thesis multi-component mass transport in thin supported amorphous silica membranes is discussed. These membranes are micro-porous, with pore diameters smaller than 4Å and show high fluxes for small molecules (such as hydrogen) combined with high selectivities for these molecules with respect

  15. Optimization of perfluorocarbon emulsion properties for enhancing oxygen mass transfer in a bio-artificial liver support system

    CSIR Research Space (South Africa)

    Moolman, FS

    2004-07-29

    Full Text Available : With increase in the dispersed phase volume fraction (phi(p)) both the oxygen holding capacity and the viscosity increases. These issues are addressed here using simplified mass transfer models, amenable to analytical solution, for both gas-sparged and membrane...

  16. Patient support systems

    International Nuclear Information System (INIS)

    Braden, A.B.; McBride, T.R.; Styblo, D.J.; Taylor, S.K.; Richey, J.B.

    1979-01-01

    A patient support system for use in computerized tomography (CT) is described. The system is particularly useful for CT scanning of the brain and also of the abdominal area. The support system consists of two moveable tables which may be translated into position for X-ray scanning of the patient's body and which may be translated incrementally and automatically to obtain scans at adjacent locations. For use with brain scans, the second table is replaced by a detachable restraint assembly which is described in detail. The support system is so designed that only a small volume of low density material will intercept the X-ray beam. (UK)

  17. Decision support systems

    DEFF Research Database (Denmark)

    Jørgensen, L.N.; Noe, E.; Langvad, A.M.

    2007-01-01

    system Crop Protection Online is widely used by advisors and as a learning tool for students. Although the system has been validated in many field trials over the years and has shown reliable results, the number of end-users among farmers has been relatively low during the last 10 years (approximately...... 1000 farmers). A sociological investigation of farmers' decision-making styles in the area of crop protection has shown that arable farmers can be divided into three major groups: (a) system-orientated farmers, (b) experience-based farmers and (c) advisory-orientated farmers. The information required...... by these three groups to make their decisions varies and therefore different ways of using decision support systems need to be provided. Decision support systems need to be developed in close dialogue and collaboration with user groups....

  18. Visual management support system

    Science.gov (United States)

    Lee Anderson; Jerry Mosier; Geoffrey Chandler

    1979-01-01

    The Visual Management Support System (VMSS) is an extension of an existing computer program called VIEWIT, which has been extensively used by the U. S. Forest Service. The capabilities of this program lie in the rapid manipulation of large amounts of data, specifically opera-ting as a tool to overlay or merge one set of data with another. VMSS was conceived to...

  19. Radwaste Decision Support System

    International Nuclear Information System (INIS)

    Westrom, G.; Vance, J.N.; Gelhaus, F.E.

    1989-01-01

    The purpose of the Radwaste Decision Support System (RDSS) is to provide expert advice, analysis results and instructional material relative to the treatment, handling, transport and disposal of low-level radioactive waste produced in nuclear power plants. This functional specification addresses the following topics: Functions of the RDSS, Relationships and interfaces between the function, Development of the decisions and logic tree structures embodied in waste management, Elements of the database and the characteristics required to support the decision-making process, Specific User requirements for the RDSS, Development of the user interface, Basic software architecture, and Concepts for the RDSS usage including updating and maintenance

  20. Spent fuel critical masses and supportive measurements

    International Nuclear Information System (INIS)

    Toffer, H.; Wells, A.H.

    1987-01-01

    Critical masses for spent fuel are larger than for green fuel and therefore use of the increased masses could result in improved handling, storage, and transport of such materials. To apply spent fuel critical masses requires an assessment of fuel exposure and the corresponding isotopic compositions. The paper discusses several approaches at the Hanford N Reactor in establishing fuel exposure, including a direct measurement of spent to green fuel critical masses. The benefits derived from the use of spent fuel critical masses are illustrated for cask designs at the Nuclear Assurance Corporation. (author)

  1. The INTERPRET Decision-Support System version 3.0 for evaluation of Magnetic Resonance Spectroscopy data from human brain tumours and other abnormal brain masses

    Directory of Open Access Journals (Sweden)

    Mercadal Guillem

    2010-11-01

    Full Text Available Abstract Background Proton Magnetic Resonance (MR Spectroscopy (MRS is a widely available technique for those clinical centres equipped with MR scanners. Unlike the rest of MR-based techniques, MRS yields not images but spectra of metabolites in the tissues. In pathological situations, the MRS profile changes and this has been particularly described for brain tumours. However, radiologists are frequently not familiar to the interpretation of MRS data and for this reason, the usefulness of decision-support systems (DSS in MRS data analysis has been explored. Results This work presents the INTERPRET DSS version 3.0, analysing the improvements made from its first release in 2002. Version 3.0 is aimed to be a program that 1st, can be easily used with any new case from any MR scanner manufacturer and 2nd, improves the initial analysis capabilities of the first version. The main improvements are an embedded database, user accounts, more diagnostic discrimination capabilities and the possibility to analyse data acquired under additional data acquisition conditions. Other improvements include a customisable graphical user interface (GUI. Most diagnostic problems included have been addressed through a pattern-recognition based approach, in which classifiers based on linear discriminant analysis (LDA were trained and tested. Conclusions The INTERPRET DSS 3.0 allows radiologists, medical physicists, biochemists or, generally speaking, any person with a minimum knowledge of what an MR spectrum is, to enter their own SV raw data, acquired at 1.5 T, and to analyse them. The system is expected to help in the categorisation of MR Spectra from abnormal brain masses.

  2. Dynamics of Variable Mass Systems

    Science.gov (United States)

    Eke, Fidelis O.

    1998-01-01

    This report presents the results of an investigation of the effects of mass loss on the attitude behavior of spinning bodies in flight. The principal goal is to determine whether there are circumstances under which the motion of variable mass systems can become unstable in the sense that their transverse angular velocities become unbounded. Obviously, results from a study of this kind would find immediate application in the aerospace field. The first part of this study features a complete and mathematically rigorous derivation of a set of equations that govern both the translational and rotational motions of general variable mass systems. The remainder of the study is then devoted to the application of the equations obtained to a systematic investigation of the effect of various mass loss scenarios on the dynamics of increasingly complex models of variable mass systems. It is found that mass loss can have a major impact on the dynamics of mechanical systems, including a possible change in the systems stability picture. Factors such as nozzle geometry, combustion chamber geometry, propellant's initial shape, size and relative mass, and propellant location can all have important influences on the system's dynamic behavior. The relative importance of these parameters on-system motion are quantified in a way that is useful for design purposes.

  3. Transmission market support system

    International Nuclear Information System (INIS)

    Reinschmidt, K.F.; Coles, B.C.

    1995-01-01

    An interactive, computer-based market support system has been developed for transmission access that is efficient, equitable, and fair to all parties concerned with electrical transmission: utilities, electric generators, owners of transmission networks, and wholesale purchasers of electrical power. Each participant transmits electronically to the computer system his proposed price schedule for buying, selling, or transmitting power for each future time period. The price for transmission on a single line in one direction can differ from the price in the other direction. The total quantity offered in the transmission bid represents the capacity of the line, and the flow on the line cannot exceed this value. The system automatically computes the prices that clear the market; that is, the price that each generator receives at each bus, the price that each transmission operator receives on each line, and the price that each customer pays at each bus. The computer system maximizes the benefits to all three classes while satisfying the electrical characteristics of the transmission system by means of load flow calculations. Customers never pay more than their bid prices (but may pay less), and generators and transmission operators never receive less than their bid prices (but may receive more). The price at each bus applies to all buyers and sellers at that bus: all buyers at the same bus pay the same price and all generators at a bus receive the same price

  4. NASA Advanced Exploration Systems: Advancements in Life Support Systems

    Science.gov (United States)

    Shull, Sarah A.; Schneider, Walter F.

    2016-01-01

    The NASA Advanced Exploration Systems (AES) Life Support Systems (LSS) project strives to develop reliable, energy-efficient, and low-mass spacecraft systems to provide environmental control and life support systems (ECLSS) critical to enabling long duration human missions beyond low Earth orbit (LEO). Highly reliable, closed-loop life support systems are among the capabilities required for the longer duration human space exploration missions assessed by NASA’s Habitability Architecture Team.

  5. MASS TRANSFER IN PORE STRUCTURES OF SUPPORTED CATALYSTS

    Directory of Open Access Journals (Sweden)

    F.R.C. Silva

    1997-09-01

    Full Text Available The effects of gas-solid interaction and mass transfer in fixed-bed systems of supported catalysts were analyzed for g -Al2O3 (support and Cu/g -Al2O3 (catalyst systems. Evaluations of the mass transfer coefficients in the macropores and of the diffusivity in the micropores, as formed by the crystallite agglomerates of the metallic phases, were obtained. Dynamic experiments with gaseous tracers permitted the quantification of the parameters based on models for these two pore structures. With a flow in a range of 18 cm3 s-1 to 39.98 cm3 s-1 at 45oC, 65oC and 100oC, mass transfer coefficients km =4.33x10-4 m s-1 to 7.38x10-4 m s-1 for macropore structures and diffusivities Dm =1.29x10-11 m2 s-1 to 5.35x10-11 m2 s-1 for micropore structures were estimated

  6. Systems of neutrinos with mass

    International Nuclear Information System (INIS)

    Groot, S.R. de

    1984-01-01

    From the formalism of relativistic kinetic theory and the weak interaction Lagrangian the volume viscosity of a massive neutrino system is derived. Its value is calculated as a function of the neutrino mass and the temperature. Its role in the way of expanding or contraction of neutrino clouds in the universe is discussed. (Author) [pt

  7. Stope face support systems

    CSIR Research Space (South Africa)

    Daehnke, A

    1998-12-01

    Full Text Available The primary output of this report was the determination of geotechnical areas across the gold and platinum mines to form the basis for future understanding of the rock mass behaviour around reefs where the hanging wall and footwall rock types differ...

  8. Formulations and algorithms for problems on rock mass and support deformation during mining

    Science.gov (United States)

    Seryakov, VM

    2018-03-01

    The analysis of problem formulations to calculate stress-strain state of mine support and surrounding rocks mass in rock mechanics shows that such formulations incompletely describe the mechanical features of joint deformation in the rock mass–support system. The present paper proposes an algorithm to take into account the actual conditions of rock mass and support interaction and the algorithm implementation method to ensure efficient calculation of stresses in rocks and support.

  9. Effects of support masses on seismic response of piping and supports

    International Nuclear Information System (INIS)

    Iotti, R.C.; Dinkevich, S.

    1985-01-01

    A special methodology is presented for quantitatively predicting when the effect of piping restraint masses is significant and should be explicitly considered in piping seismic analyses which use the response spectrum method. It is concluded that the effect of support mass in the unrestrained direction is to increase piping and support responses by a percentage no larger than twice the ratio of the support to the pipe-supported span mass. In the restrained direction the mass of the support significantly reduces its dynamic stiffness so that for low support stiffnesses and relatively large mass the support can act as an amplifier of vibration. The dynamic effect, however, is negligible for very stiff supports. (orig.)

  10. Effect of lumped mass and support stiffness on pipe seismic response

    International Nuclear Information System (INIS)

    Chang, P.S.Y.

    1986-01-01

    In performing pipe stress analysis, generic support stiffness values are typically used to predict the response of the piping systems. Consistent design of every support to match the generic stiffness value is difficult. The difference between the actual and generic stiffness may affect the results of pipe stresses and support reactions. The objective of this study is to develop an acceptance criteria for the actual support stiffness and to avoid unnecessary reanalysis. The support mass in the restraint direction and mass within the pipe span can also affect the piping system behavior and this study will discuss this mass effect as well. Added mass and change in support stiffness will cause the piping system to shift frequency

  11. Life Support Systems: Environmental Monitoring

    Data.gov (United States)

    National Aeronautics and Space Administration — The Advanced Exploration Systems (AES) Life Support Systems project Environmental Monitoring (EM) systems task objectives are to develop and demonstrate onboard...

  12. Incompletely characterized incidental renal masses: emerging data support conservative management.

    Science.gov (United States)

    Silverman, Stuart G; Israel, Gary M; Trinh, Quoc-Dien

    2015-04-01

    With imaging, most incidental renal masses can be diagnosed promptly and with confidence as being either benign or malignant. For those that cannot, management recommendations can be devised on the basis of a thorough evaluation of imaging features. However, most renal masses are either too small to characterize completely or are detected initially in imaging examinations that are not designed for full evaluation of them. These masses constitute a group of masses that are considered incompletely characterized. On the basis of current published guidelines, many masses warrant additional imaging. However, while the diagnosis of renal cancer at a curable stage remains the first priority, there is the additional need to reduce unnecessary healthcare costs and radiation exposure. As such, emerging data now support foregoing additional imaging for many incompletely characterized renal masses. These data include the low risk of progression to metastases or death for small renal masses that have undergone active surveillance (including biopsy-proven cancers) and a better understanding of how specific imaging features can be used to diagnose their origins. These developments support (a) avoidance of imaging entirely for those incompletely characterized renal masses that are highly likely to be benign cysts and (b) delay of further imaging of small solid masses in selected patients. Although more evidence-based data are needed and comprehensive management algorithms have yet to be defined, these recommendations are medically appropriate and practical, while limiting the imaging of many incompletely characterized incidental renal masses.

  13. Characteristics of mineral nutrition of plants in the bio-technical life support system with human wastes included in mass exchange

    Science.gov (United States)

    Tikhomirova, Natalia; Ushakova, Sofya; Kalacheva, Galina; Tikhomirov, Alexander

    2016-09-01

    The study addresses the effectiveness of using ion exchange substrates (IES) to optimize mineral nutrition of plants grown in the nutrient solutions containing oxidized human wastes for application in bio-technical life support systems. The study shows that the addition of IES to the root-inhabited substrate is favorable for the growth of wheat vegetative organs but causes a decrease in the grain yield. By contrast, the addition of IES to the nutrient solution does not influence the growth of vegetative organs but favors normal development of wheat reproductive organs. Thus, to choose the proper method of adjusting the solution with IES, one should take into account specific parameters of plant growth and development and the possibility of multiple recycling of IES based on the liquid products of mineralization of human wastes.

  14. [Habitability and life support systems].

    Science.gov (United States)

    Nefedov, Iu G; Adamovich, B A

    1988-01-01

    This paper discusses various aspects of space vehicle habitability and life support systems. It describes variations in the chemical and microbial composition of an enclosed atmosphere during prolonged real and simulated flights. The paper gives a detailed description of life support systems and environmental investigations onboard the Mir station. It also outlines the development of space vehicle habitability and life support systems as related to future flights.

  15. Computer-Supported Information Systems.

    Science.gov (United States)

    Mayhew, William H.

    1983-01-01

    The planning and implementation of a computerized management information system at a fictional small college is described. Nine key points are made regarding department involvement, centralization, gradual program implementation, lowering costs, system documentation, and upper-level administrative support. (MSE)

  16. Hawaiian hydrogen mass transit system

    International Nuclear Information System (INIS)

    Russell, G.W.; Russell, A.

    1990-01-01

    This paper proposes a joint effort between the scientific and business communities; to create, make and have hydrogen fuel become the primary fuel of the future. Hawaii has abundant, unharnessed renewable resources yet imports almost all of its fuel. Initiating hydrogen production and industrial application in conjunction with a prototype pilot project such as this mass transit system would not only accomplish the joining of science and business but give an environmentally safe energy alternative to the state and people of Hawaii and hopefully the world

  17. System for technical innovation support

    International Nuclear Information System (INIS)

    2011-08-01

    This book lists field of support system, which includes tax, development work, basic research project, industrial technology, information and communications field, energy field, part and materials field, local industry, the small and medium business such as technical development field, and industry-university collaboration like summary of investment and financing support and guarantee, support of manpower such as brain pool and contact Korea, support of technique like development technology and strategy for patent, support on certification such as company and technical goods, purchase support.

  18. Clinical Information Support System (CISS)

    Data.gov (United States)

    Department of Veterans Affairs — Clinical Information Support System (CISS) is a web-based portal application that provides a framework of services for the VA enterprise and supplies an integration...

  19. Integrated Control System Engineering Support.

    Science.gov (United States)

    1984-12-01

    Advanced Medium Range Air to Air Missile ASTEC Advanced Speech Technology Experimental Configuration BA Body Axis BCIU Bus Control Interface Unit BMU Bus...support nreeded to tie an ASTEC speech recognition system into the DIGISYN fJcility and support an FIGR experiment designed to investigate the voice...information passed to the PDP computer consisted of integers which represented words or phrases recognized by the ASTEC recognition system. An interface

  20. Avinash-Shukla mass limit for the maximum dust mass supported against gravity by electric fields

    Science.gov (United States)

    Avinash, K.

    2010-08-01

    The existence of a new class of astrophysical objects, where gravity is balanced by the shielded electric fields associated with the electric charge on the dust, is shown. Further, a mass limit MA for the maximum dust mass that can be supported against gravitational collapse by these fields is obtained. If the total mass of the dust in the interstellar cloud MD > MA, the dust collapses, while if MD < MA, stable equilibrium may be achieved. Heuristic arguments are given to show that the physics of the mass limit is similar to the Chandrasekar's mass limit for compact objects and the similarity of these dust configurations with neutron and white dwarfs is pointed out. The effect of grain size distribution on the mass limit and strong correlation effects in the core of such objects is discussed. Possible location of these dust configurations inside interstellar clouds is pointed out.

  1. Zero voltage mass spectrometry probes and systems

    Science.gov (United States)

    Cooks, Robert Graham; Wleklinski, Michael Stanley; Bag, Soumabha; Li, Yafeng

    2017-10-10

    The invention generally relates to zero volt mass spectrometry probes and systems. In certain embodiments, the invention provides a system including a mass spectrometry probe including a porous material, and a mass spectrometer (bench-top or miniature mass spectrometer). The system operates without an application of voltage to the probe. In certain embodiments, the probe is oriented such that a distal end faces an inlet of the mass spectrometer. In other embodiments, the distal end of the probe is 5 mm or less from an inlet of the mass spectrometer.

  2. Design Rules for Life Support Systems

    Science.gov (United States)

    Jones, Harry

    2002-01-01

    This paper considers some of the common assumptions and engineering rules of thumb used in life support system design. One general design rule is that the longer the mission, the more the life support system should use recycling and regenerable technologies. A more specific rule is that, if the system grows more than half the food, the food plants will supply all the oxygen needed for the crew life support. There are many such design rules that help in planning the analysis of life support systems and in checking results. These rules are typically if-then statements describing the results of steady-state, "back of the envelope," mass flow calculations. They are useful in identifying plausible candidate life support system designs and in rough allocations between resupply and resource recovery. Life support system designers should always review the design rules and make quick steady state calculations before doing detailed design and dynamic simulation. This paper develops the basis for the different assumptions and design rules and discusses how they should be used. We start top-down, with the highest level requirement to sustain human beings in a closed environment off Earth. We consider the crew needs for air, water, and food. We then discuss atmosphere leakage and recycling losses. The needs to support the crew and to make up losses define the fundamental life support system requirements. We consider the trade-offs between resupplying and recycling oxygen, water, and food. The specific choices between resupply and recycling are determined by mission duration, presence of in-situ resources, etc., and are defining parameters of life support system design.

  3. Introduction to Life Support Systems

    Science.gov (United States)

    Perry, Jay

    2017-01-01

    This course provides an introduction to the design and development of life support systems to sustain humankind in the harsh environment of space. The life support technologies necessary to provide a respirable atmosphere and clean drinking water are emphasized in the course. A historical perspective, beginning with open loop systems employed aboard the earliest crewed spacecraft through the state-of-the-art life support technology utilized aboard the International Space Station today, will provide a framework for students to consider applications to possible future exploration missions and destinations which may vary greatly in duration and scope. Development of future technologies as well as guiding requirements for designing life support systems for crewed exploration missions beyond low-Earth orbit are also considered in the course.

  4. Education and training support system

    International Nuclear Information System (INIS)

    Kubota, Rhuji; Iyadomi, Motomi.

    1996-01-01

    In order to train the specialist such as operator or maintenance stuff of large scale plant such as nuclear power plant or thermal power plant, a high grade teaching and training support system is required as well as in training pilot of aeroplane. The specialist in such large scale plant is also a researcher in the field of machinery, electricity and physics at first, and is grown up a expert operator or maintenance stuff through learning of CAI system or OTJ used training material for teaching tool in addition of training used operating or maintenance training device imitating actual plant after acquiring determined knowledges by receiving fundamental education on nuclear and thermal power plants. In this paper, the teaching and training support systems of the nuclear and thermal power plants for a system supporting such teaching and training, respectively, were introduced. (G.K.)

  5. A Comparison of underground opening support design methods in jointed rock mass

    International Nuclear Information System (INIS)

    Gharavi, M.; Shafiezadeh, N.

    2008-01-01

    It is of great importance to consider long-term stability of rock mass around the openings of underground structure. during design, construction and operation of the said structures in rock. In this context. three methods namely. empirical. analytical and numerical have been applied to design and analyze the stability of underground infrastructure at the Siah Bisheh Pumping Storage Hydro-Electric Power Project in Iran. The geological and geotechnical data utilized in this article were selected and based on the preliminary studies of this project. In the initial stages of design. it was recommended that, two methods of rock mass classification Q and rock mass rating should be utilized for the support system of the underground cavern. Next, based on the structural instability, the support system was adjusted by the analytical method. The performance of the recommended support system was reviewed by the comparison of the ground response curve and rock support interactions with surrounding rock mass, using FEST03 software. Moreover, for further assessment of the realistic rock mass behavior and support system, the numerical modeling was performed utilizing FEST03 software. Finally both the analytical and numerical methods were compared, to obtain satisfactory results complimenting each other

  6. Development of refueling support system

    International Nuclear Information System (INIS)

    Nishimura, Hiroshi; Hayashi, Shoichi; Sano, Kazuya; Hochin, Koji; Iguchi, Yukihiro

    1992-01-01

    The refueling of Fugen Nuclear Power Station requires correct management of fuels, etc. And empirical knowledge is necessary for efficient planning and refueling. Fugen developed refueling support system and put it into practical operation. The system features a network of refueling equipment and AI rules aquired from operators knowledge. The system helps make an optimized plan, displays step-by-step guidance and prints out lists of fuel locations and movements. The system reduced the labor of the operators, optimized the management and improved the reliability of the refueling. (author)

  7. Support system, excavation arrangement, and process of supporting an object

    Science.gov (United States)

    Arnold, Bill W.

    2017-08-01

    A support system, an excavation arrangement, and a process of supporting an object are disclosed. The support system includes a weight-bearing device and a camming mechanism positioned below the weight-bearing device. A downward force on the weight-bearing device at least partially secures the camming mechanism to opposing surfaces. The excavation arrangement includes a borehole, a support system positioned within and secured to the borehole, and an object positioned on and supported by the support system. The process includes positioning and securing the support system and positioning the object on the weight-bearing device.

  8. Unstable mass outflow from a binary system

    Energy Technology Data Exchange (ETDEWEB)

    Nariai, K [Tokyo Univ., Mitaka (Japan). Tokyo Astronomical Observatory; Sugimoto, D

    1976-12-01

    A contact binary system which fills the outer Lagrangian lobe is unstable against the mass loss from the second Lagrangian point. The effect of the mass loss on the remaining system is studied for several typical cases. It is shown that the separation between the components at the periastron decreases with a high rate in most cases; therefore, the system continues to lose mass once gas begins to flow out from the second Lagrangian point.

  9. KESS: Knowledge Engineering Support System

    OpenAIRE

    Said, Mohamed Ben; Dougherty, Nini; Anderson, Curtis; Altman, Stanley J.; Bouhaddou, Omar; Warner, Homer R.

    1987-01-01

    KESS (Knowledge Engineering Support System) is a relational information management system created at the University of Utah to document each step in the building of four expert knowledge bases. In weekly knowledge engineering sessions, groups of experts propose decision making criteria and examine information sources in the process of creating HELP knowledge frames. KESS utilizes many-to-many links with multiple files and central link files to track the different kinds of information generate...

  10. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    S. Roy

    2004-06-24

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

  11. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Roy, S.

    2004-01-01

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F andOR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures

  12. System support software for TSTA

    International Nuclear Information System (INIS)

    Claborn, G.W.; Mann, L.W.; Nielson, C.W.

    1987-01-01

    The software at the Tritium Systems Test Assembly (TSTA) is logically broken into two parts, the system support software and the subsystem software. The purpose of the system support software is to isolate the subsystem software from the physical hardware. In this sense the system support software forms the kernel of the software at TSTA. The kernel software performs several functions. It gathers data from CAMAC modules and makes that data available for subsystem processes. It services requests to send commands to CAMAC modules. It provides a system of logging functions and provides for a system-wide global program state that allows highly structured interaction between subsystem processes. The kernel's most visible function is to provide the Man-Machine Interface (MMI). The MMI allows the operators a window into the physical hardware and subsystem process state. Finally the kernel provides a data archiving and compression function that allows archival data to be accessed and plotted. Such kernel software as developed and implemented at TSTA is described

  13. Integrated logistic support analysis system

    International Nuclear Information System (INIS)

    Carnicero Iniguez, E.J.; Garcia de la Sen, R.

    1993-01-01

    Integrating logic support into a system results in a large volume of information having to be managed which can only be achieved with the help of computer applications. Both past experience and growing needs in such tasks have led Emperesarios Agrupados to undertake an ambitious development project which is described in this paper. (author)

  14. Spill operation system decision support system

    International Nuclear Information System (INIS)

    Clark, R.

    1992-01-01

    The MSRC Spill Operation System (SOS) is a tool for the support of decision-making at the time of a catastrophic oil spill. SOS provides MSRC decision-makers with access to information about the source of the spill, the spill environment, and the availability of spill response resources. This system is designed to meet the information needs of a Response Supervisor, an Environmental Advisor, Logistics/Maintenance Supervisor, Operations Supervisor, and the MSRC Regional General Manager. The SOS project Objectives are: (1) integrate currently available data, systems, and technologies; (2) develop an application that effectively supports mobilized operations and can be adapted to support normal operations; (3) ensure that the development of computer applications is driven by user needs and not by technology; and (4) coordinate with government and other industry organizations to avoid duplication of effort. Design Objectives for SOS are: (1) centralize management information storage while decentralizing decision making capabilities; (2) boost User confidence by providing a system that is easy to learn, easy to use, and is open-quotes Sailor Proofclose quotes; and (3) use visualization technology in providing spill related information. This approach includes the use of Geographic Information System (GIS) technology for maps and geographically associated resource; and support MSRC's concept of operation which includes - a swift notification of response personnel; fast mobilization of response resources; and accurate tracking of resources during a spill. MSRC is organized into five responsibility regions

  15. Optimal Design of a Center Support Quadruple Mass Gyroscope (CSQMG

    Directory of Open Access Journals (Sweden)

    Tian Zhang

    2016-04-01

    Full Text Available This paper reports a more complete description of the design process of the Center Support Quadruple Mass Gyroscope (CSQMG, a gyro expected to provide breakthrough performance for flat structures. The operation of the CSQMG is based on four lumped masses in a circumferential symmetric distribution, oscillating in anti-phase motion, and providing differential signal extraction. With its 4-fold symmetrical axes pattern, the CSQMG achieves a similar operation mode to Hemispherical Resonant Gyroscopes (HRGs. Compared to the conventional flat design, four Y-shaped coupling beams are used in this new pattern in order to adjust mode distribution and enhance the synchronization mechanism of operation modes. For the purpose of obtaining the optimal design of the CSQMG, a kind of applicative optimization flow is developed with a comprehensive derivation of the operation mode coordination, the pseudo mode inhibition, and the lumped mass twisting motion elimination. The experimental characterization of the CSQMG was performed at room temperature, and the center operation frequency is 6.8 kHz after tuning. Experiments show an Allan variance stability 0.12°/h (@100 s and a white noise level about 0.72°/h/√Hz, which means that the CSQMG possesses great potential to achieve navigation grade performance.

  16. Classification of masses on mammograms using support vector machine

    Science.gov (United States)

    Chu, Yong; Li, Lihua; Goldgof, Dmitry B.; Qui, Yan; Clark, Robert A.

    2003-05-01

    Mammography is the most effective method for early detection of breast cancer. However, the positive predictive value for classification of malignant and benign lesion from mammographic images is not very high. Clinical studies have shown that most biopsies for cancer are very low, between 15% and 30%. It is important to increase the diagnostic accuracy by improving the positive predictive value to reduce the number of unnecessary biopsies. In this paper, a new classification method was proposed to distinguish malignant from benign masses in mammography by Support Vector Machine (SVM) method. Thirteen features were selected based on receiver operating characteristic (ROC) analysis of classification using individual feature. These features include four shape features, two gradient features and seven Laws features. With these features, SVM was used to classify the masses into two categories, benign and malignant, in which a Gaussian kernel and sequential minimal optimization learning technique are performed. The data set used in this study consists of 193 cases, in which there are 96 benign cases and 97 malignant cases. The leave-one-out evaluation of SVM classifier was taken. The results show that the positive predict value of the presented method is 81.6% with the sensitivity of 83.7% and the false-positive rate of 30.2%. It demonstrated that the SVM-based classifier is effective in mass classification.

  17. System Support for Forensic Inference

    Science.gov (United States)

    Gehani, Ashish; Kirchner, Florent; Shankar, Natarajan

    Digital evidence is playing an increasingly important role in prosecuting crimes. The reasons are manifold: financially lucrative targets are now connected online, systems are so complex that vulnerabilities abound and strong digital identities are being adopted, making audit trails more useful. If the discoveries of forensic analysts are to hold up to scrutiny in court, they must meet the standard for scientific evidence. Software systems are currently developed without consideration of this fact. This paper argues for the development of a formal framework for constructing “digital artifacts” that can serve as proxies for physical evidence; a system so imbued would facilitate sound digital forensic inference. A case study involving a filesystem augmentation that provides transparent support for forensic inference is described.

  18. Dynamics of mechanical systems with variable mass

    CERN Document Server

    Belyaev, Alexander

    2014-01-01

    The book presents up-to-date and unifying formulations for treating dynamics of different types of mechanical systems with variable mass. The starting point is overview of the continuum mechanics relations of balance and jump for open systems from which extended Lagrange and Hamiltonian formulations are derived. Corresponding approaches are stated at the level of analytical mechanics with emphasis on systems with a position-dependent mass and at the level of structural mechanics. Special emphasis is laid upon axially moving structures like belts and chains, and on pipes with an axial flow of fluid. Constitutive relations in the dynamics of systems with variable mass are studied with particular reference to modeling of multi-component mixtures. The dynamics of machines with a variable mass are treated in detail and conservation laws and the stability of motion will be analyzed. Novel finite element formulations for open systems in coupled fluid and structural dynamics are presented.

  19. Decision support system to select cover systems

    International Nuclear Information System (INIS)

    Bostick, K.V.

    1995-01-01

    The objective of this technology is to provide risk managers with a defensible, objective way to select capping alternatives for remediating radioactive and mixed waste landfills. The process of selecting containment cover technologies for mixed waste landfills requires consideration of many complex and interrelated technical, regulatory, and economic issues. A Decision Support System (DSS) is needed to integrate the knowledge of experts from scientific, engineering, and management disciplines to help in selecting the best capping practice for the site

  20. Supporting the Support System: How Assessment and Communication Can Help Patients and Their Support Systems.

    Science.gov (United States)

    Harkey, Jane; Young, Jared; Carter, Jolynne Jo; Demoratz, Michael

    The benefits of having a support system, such as social relationships with close friends and family, have been well documented for patients with serious health issues. As scientific evidence has shown, individuals who have the lowest level of involvement in social relationships face a greater mortality risk. Support systems, however, are not infallible. Relationship stress can have a negative impact on people-patient and caregiver alike-behaviorally, psychosocially, and physiologically. The purpose of this article is to encourage case managers who take a patient-centered approach to also consider the existence and extent of the support system, as well as any stresses or tensions that are observable within the support system. Although the case manager is ethically obliged to advocate for the individual receiving case management services, that advocacy can be extended to the support system for the good of all. This discussion applies to numerous case management practices and work settings including (but not limited to) hospital-based case management, home health, geriatrics, catastrophic case management, mental health, palliative care, and end of life/hospice. As part of the assessment phase of the case management process, case managers determine the extent of the patient's support system or social support network such as family and close friends. Although their advocacy is primarily for the patient receiving case management services, case managers also become aware of the needs of the support system members as they face their loved one's serious illness, severe injury, geriatric care demands, or end of life. Case managers can use their communication skills, especially motivational interviewing, with patients and their support systems to identify stresses and issues that can impact the pursuit of health goals. In addition, case managers ensure that individuals and their support systems are kept informed such as about the health condition, stage of disease, plan of

  1. 'RECASS'. Radioecological analysis support system

    International Nuclear Information System (INIS)

    Shershakov, V.

    1998-01-01

    The RECASS is developed as a computer system designed for radiation monitoring and decision-making support in a nuclear emergency. The RECASS system has excellent capabilities for collecting, storing, and presenting data from the radiological situation of contaminated areas. It is well designed for modeling radionuclide migration in the environmental media and for assessing countermeasures in terms of doses received by population groups as a result of radioactive contamination. For RECASS to be used as a basis for solving the problems of radioecological analysis, it is essential that mapping facilities are provided and that scaling capabilities allow data to be presented with the necessary degree of detail and accuracy. Because of the on-line links with the operating network of radiological monitoring, RECASS is capable of collecting meteorological and radiological data from across the country and storing this information in its databases. The availability of data from the network of radiological monitoring makes it possible to develop RECASS as a real-time emergency response system. (R.P.)

  2. 14 CFR 417.307 - Support systems.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Support systems. 417.307 Section 417.307... TRANSPORTATION LICENSING LAUNCH SAFETY Flight Safety System § 417.307 Support systems. (a) General. (1) A flight safety system must include the systems required by this section to support the functions of the flight...

  3. Online mass storage system detailed requirements document

    Science.gov (United States)

    1976-01-01

    The requirements for an online high density magnetic tape data storage system that can be implemented in a multipurpose, multihost environment is set forth. The objective of the mass storage system is to provide a facility for the compact storage of large quantities of data and to make this data accessible to computer systems with minimum operator handling. The results of a market survey and analysis of candidate vendor who presently market high density tape data storage systems are included.

  4. Bioregenerative life-support systems

    Science.gov (United States)

    Mitchell, C. A.

    1994-01-01

    Long-duration future habitation of space involving great distances from Earth and/or large crew sizes (eg, lunar outpost, Mars base) will require a controlled ecological life-support system (CELSS) to simultaneously revitalize atmosphere (liberate oxygen and fix carbon dioxide), purify water (via transpiration), and generate human food (for a vegetarian diet). Photosynthetic higher plants and algae will provide the essential functions of biomass productivity in a CELSS, and a combination of physicochemical and bioregenerative processes will be used to regenerate renewable resources from waste materials. Crop selection criteria for a CELSS include nutritional use characteristics as well as horticultural characteristics. Cereals, legumes, and oilseed crops are used to provide the major macronutrients for the CELSS diet. A National Aeronautics and Space Administration (NASA) Specialized Center of Research and Training (NSCORT) was established at Purdue University to establish proof of the concept of the sustainability of a CELSS. The Biosphere 2 project in Arizona is providing a model for predicted and unpredicted situations that arise as a result of closure in a complex natural ecosystem.

  5. Building a mass storage system for physics applications

    International Nuclear Information System (INIS)

    Holmes, H.; Loken, S.

    1991-03-01

    The IEEE Mass Storage Reference Model and forthcoming standards based on it provide a standardized architecture to facilitate designing and building mass storage systems, and standard interfaces so that hardware and software from different vendors can interoperate in providing mass storage capabilities. A key concept of this architecture is the separation of control and data flows. This separation allows a smaller machine to provide control functions, while the data can flow directly between high-performance channels. Another key concept is the layering of the file system and the storage functions. This layering allows the designers of the mass storage system to focus on storage functions, which can support a variety of file systems, such as the Network File System, the Andrew File System, and others. The mass storage system provides location-independent file naming, essential if files are to be migrated to different storage devices without requiring changes in application programs. Physics data analysis applications are particularly challenging for mass storage systems because they stream vast amounts of data through analysis applications. Special mechanisms are required, to handle the high data rates and to avoid upsetting the caching mechanisms commonly used for smaller, repetitive-use files. High data rates are facilitated by direct channel connections, where, for example, a dual-ported drive will be positioned by the mass storage controller on one channel, then the data will flow on a second channel directly into the user machine, or directly to a high capacity network, greatly reducing the I/O capacity required in the mass storage control computer. Intelligent storage allocation can be used to bypass the cache devices entirely when large files are being moved

  6. 49 CFR 193.2609 - Support systems.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Support systems. 193.2609 Section 193.2609 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY...: FEDERAL SAFETY STANDARDS Maintenance § 193.2609 Support systems. Each support system or foundation of each...

  7. Support system of a structure on a support base

    International Nuclear Information System (INIS)

    Arene, G.; Renaux, C.; Minguet, J.L.; Chantot, H.

    1984-01-01

    Two series of strips are fixed to the structure to be supported and to the base to define each one a closed convex envelope; the strips are flexible in the radial direction with regard to the envelope. The two series of strips are connected by a treillis of rigid bars set to form juxtaposed V or X. A good transversal rigidity and a certain radial flexibility are obtained. The invention can be applied to a fast neutron nuclear reactor, the reactor comprising a vertical axis vessel filled with liquid metal; the vessel rests on a support foundation by means of the support system proposed by the invention. The support system allows the supported structure to resist the effects of an eventual earthquake and brutal temperature variations [fr

  8. Computerized mass spectrometer data system at LLL

    International Nuclear Information System (INIS)

    Friesen, R.D.; Dupzyk, R.J.

    1976-01-01

    The data systems on the three mass spectrometers at LLL are computer-controlled, pulse-counting systems synchronized to a repeatedly swept magnetic field. The data are accumulated in the memory of the computer or in a Nuclear Data ND 180 in a multi-scaler mode of operation. This mode of data acquisition allows a continuous check of the background stability and makes tune-up easier. But the main benefit is a reduction in the required ion emission rate stability. By the use of standards to set the system dead time, we have been able to utilize the sensitivity of a pulse counting system without the expense of exotic equipment

  9. Mass spectrometer data system at LLL

    International Nuclear Information System (INIS)

    Friesen, R.D.

    1975-01-01

    The data systems on the three mass spectrometers at LLL are computer-controlled, pulse-counting systems synchronized to a repeatedly-swept magnetic field. The data are accumulated in the memory of the computer or in a Nuclear Data ND 180 in a multi-scaler mode of operation. This mode of sweeping allows a continuous check of the background stability and makes tune-up easier. But the main benefit is a reduction in the required ion emission rate stability. By the use of standards to set the system dead time, we have been able to utilize the sensitivity of a pulse counting system without the expense of exotic equipment

  10. Adaptive Collaboration Support Systems : Designing Collaboration Support for Dynamic Environments

    NARCIS (Netherlands)

    Janeiro, J.; Knoll, S.W.; Lukosch, S.G.; Kolfschoten, G.L.

    2012-01-01

    Today, engineering systems offer a variety of local and webbased applications to support collaboration by assisting groups in structuring activities, generating and sharing data, and improving group communication. To ensure the quality of collaboration, engineering system design needs to analyze and

  11. Professional Growth & Support System Self-Assessment

    Science.gov (United States)

    Education Resource Strategies, 2013

    2013-01-01

    The "Professional Growth & Support System Self-Assessment" is designed to help school systems evaluate their current Professional Growth & Support strategy. The self-assessment is organized around the "Eight Principles of Strategic Professional Growth & Support." Each section allows school leaders to identify the…

  12. Support Systems for Treatment Integrity

    NARCIS (Netherlands)

    Goense, Pauline Brigitta; Boendermaker, Leonieke; van Yperen, Tom

    Objective: This systematic review evaluates the content of effective support provided to practitioners of evidence-based interventions in order to establish and maintain treatment integrity. Method: Four articles covering six outcome studies are included in this review, these studies (1) adequately

  13. Nuclear molecular structure in heavy mass systems

    International Nuclear Information System (INIS)

    Arctaedius, T.; Bargholtz, C.

    1989-04-01

    A study is made of nuclear molecular configurations involving one heavy mass partner. The stability of these configurations to mass flow and to fission is investigated as well as their population in fusion reactions. It is concluded that shell effects in combination with the effects of angular momentum may be important in stabilizing certain configurations. A possible relation of these configurations to the so called superdeformed states is pointed out. The spectrum of rotational and vibrational trasitions within molecular configurations is investigated. For sufficiently mass-asymmetric systems the engergies of vibrational transitions are comparable to the neutron separation energy. Gamma radiation from such transitions may then be observable above the background of statistical transitions. The gamma spectrum and the directional distribution of the radioation following fusion reactions with 12 C and 16 O are calculated. (authors)

  14. Developing Information Systems for Competitive Intelligence Support.

    Science.gov (United States)

    Hohhof, Bonnie

    1994-01-01

    Discusses issues connected with developing information systems for competitive intelligence support; defines the elements of an effective competitive information system; and summarizes issues affecting system design and implementation. Highlights include intelligence information; information needs; information sources; decision making; and…

  15. NASA Advanced Explorations Systems: Advancements in Life Support Systems

    Science.gov (United States)

    Shull, Sarah A.; Schneider, Walter F.

    2016-01-01

    The NASA Advanced Exploration Systems (AES) Life Support Systems (LSS) project strives to develop reliable, energy-efficient, and low-mass spacecraft systems to provide environmental control and life support systems (ECLSS) critical to enabling long duration human missions beyond low Earth orbit (LEO). Highly reliable, closed-loop life support systems are among the capabilities required for the longer duration human space exploration missions assessed by NASA's Habitability Architecture Team (HAT). The LSS project is focused on four areas: architecture and systems engineering for life support systems, environmental monitoring, air revitalization, and wastewater processing and water management. Starting with the international space station (ISS) LSS systems as a point of departure (where applicable), the mission of the LSS project is three-fold: 1. Address discrete LSS technology gaps 2. Improve the reliability of LSS systems 3. Advance LSS systems towards integrated testing on the ISS. This paper summarized the work being done in the four areas listed above to meet these objectives. Details will be given on the following focus areas: Systems Engineering and Architecture- With so many complex systems comprising life support in space, it is important to understand the overall system requirements to define life support system architectures for different space mission classes, ensure that all the components integrate well together and verify that testing is as representative of destination environments as possible. Environmental Monitoring- In an enclosed spacecraft that is constantly operating complex machinery for its own basic functionality as well as science experiments and technology demonstrations, it's possible for the environment to become compromised. While current environmental monitors aboard the ISS will alert crew members and mission control if there is an emergency, long-duration environmental monitoring cannot be done in-orbit as current methodologies

  16. A method for making a glass supported system, such glass supported system, and the use of a glass support therefor

    NARCIS (Netherlands)

    Unnikrishnan, S.; Jansen, Henricus V.; Berenschot, Johan W.; Fazal, I.; Louwerse, M.C.; Mogulkoc, B.; Sanders, Remco G.P.; de Boer, Meint J.; Elwenspoek, Michael Curt

    2008-01-01

    The invention relates to a method for making a glass supported micro or nano system, comprising the steps of: i) providing a glass support; ii) mounting at least one system on at least one glass support; and iii) bonding the system to the glass support, such that the system is circumferentially

  17. Unmanned systems win unexpected support

    Energy Technology Data Exchange (ETDEWEB)

    Schneiderman, R.

    1991-09-01

    A review of unmanned aerial vehicles (UAVs) is presented in which emphasis is given to recent mission accomplishments and current directions of research. Existing and new military UAV programs are listed with reference to funding, the type of vehicle, and level of development. Several trends are established including the reliance of UVAs on global positioning satellites and advanced electronics and the growth of the UVA industry. UVAs that are in advanced stages of development or have been deployed include short-range UAV such as the Pioneer, the Pointer, the Sky Owl, and the Hunter. Key UAV systems are described such as the Advanced Tactical Airborne Reconnaissance System, the Maritime Vertical Takeoff and Landing, and other VTOL systems. Very small UVAs and Exdrones are also discussed, and a weather reconnaissance system and surveillance systems are mentioned.

  18. Variation in body mass dynamics among sites in Black Brant Branta bernicla nigricans supports adaptivity of mass loss during moult

    Science.gov (United States)

    Fondell, Thomas F.; Flint, Paul L.; Schmutz, Joel A.; Schamber, Jason L.; Nicolai, Christopher A.

    2013-01-01

    Birds employ varying strategies to accommodate the energetic demands of moult, one important example being changes in body mass. To understand better their physiological and ecological significance, we tested three hypotheses concerning body mass dynamics during moult. We studied Black Brant in 2006 and 2007 moulting at three sites in Alaska which varied in food availability, breeding status and whether geese undertook a moult migration. First we predicted that if mass loss during moult were simply the result of inadequate food resources then mass loss would be highest where food was least available. Secondly, we predicted that if mass loss during moult were adaptive, allowing birds to reduce activity during moult, then birds would gain mass prior to moult where feeding conditions allowed and mass loss would be positively related to mass at moult initiation. Thirdly, we predicted that if mass loss during moult were adaptive, allowing birds to regain flight sooner, then across sites and groups, mass at the end of the flightless period would converge on a theoretical optimum, i.e. the mass that permits the earliest possible return to flight. Mass loss was greatest where food was most available and thus our results did not support the prediction that mass loss resulted from inadequate food availability. Mass at moult initiation was positively related to both food availability and mass loss. In addition, among sites and years, variation in mass was high at moult initiation but greatly reduced at the end of the flightless period, appearing to converge. Thus, our results supported multiple predictions that mass loss during moult was adaptive and that the optimal moulting strategy was to gain mass prior to the flightless period, then through behavioural modifications use these body reserves to reduce activity and in so doing also reduce wing loading. Geese that undertook a moult migration initiated moult at the highest mass, indicating that they were more than able to

  19. Dynamism in Electronic Performance Support Systems.

    Science.gov (United States)

    Laffey, James

    1995-01-01

    Describes a model for dynamic electronic performance support systems based on NNAble, a system developed by the training group at Apple Computer. Principles for designing dynamic performance support are discussed, including a systems approach, performer-centered design, awareness of situated cognition, organizational memory, and technology use.…

  20. GH Travel & Mission Support System

    Data.gov (United States)

    US Agency for International Development — HTRAMS is a travel data collection system for GH that collects information on both the basic details of an employee's trips (destination, length, purpose, etc.) and...

  1. PPL Travel & Mission Support System

    Data.gov (United States)

    US Agency for International Development — PTRAMS is a travel data collection system for PPL that collects information on both the basic details of an employee's trips (destination, length, purpose, etc.) and...

  2. DCHA Travel & Mission Support System

    Data.gov (United States)

    US Agency for International Development — DTRAMS is a travel data collection system for DCHA that collects information on both the basic details of an employee's trips (destination, length, purpose, etc.)...

  3. Planetary mass function and planetary systems

    Science.gov (United States)

    Dominik, M.

    2011-02-01

    With planets orbiting stars, a planetary mass function should not be seen as a low-mass extension of the stellar mass function, but a proper formalism needs to take care of the fact that the statistical properties of planet populations are linked to the properties of their respective host stars. This can be accounted for by describing planet populations by means of a differential planetary mass-radius-orbit function, which together with the fraction of stars with given properties that are orbited by planets and the stellar mass function allows the derivation of all statistics for any considered sample. These fundamental functions provide a framework for comparing statistics that result from different observing techniques and campaigns which all have their very specific selection procedures and detection efficiencies. Moreover, recent results both from gravitational microlensing campaigns and radial-velocity surveys of stars indicate that planets tend to cluster in systems rather than being the lonely child of their respective parent star. While planetary multiplicity in an observed system becomes obvious with the detection of several planets, its quantitative assessment however comes with the challenge to exclude the presence of further planets. Current exoplanet samples begin to give us first hints at the population statistics, whereas pictures of planet parameter space in its full complexity call for samples that are 2-4 orders of magnitude larger. In order to derive meaningful statistics, however, planet detection campaigns need to be designed in such a way that well-defined fully deterministic target selection, monitoring and detection criteria are applied. The probabilistic nature of gravitational microlensing makes this technique an illustrative example of all the encountered challenges and uncertainties.

  4. A customized head and neck support system

    International Nuclear Information System (INIS)

    Bentel, Gunilla C.; Marks, Lawrence B.; Sherouse, George W.; Spencer, David P.

    1995-01-01

    Purpose: To describe a customized head and neck immobilization system for patients receiving radiotherapy including a head support that conforms to the posterior contour of the head and neck. Methods: The system includes a customized headrest to support the posterior head and neck. This is fixed to a thermoplastic face mask that molds to the anterior head/face contours. The shape of these customized head and neck supports were compared to 'standard' supports. Results: This system is comfortable for the patients and appears to be effective in reproducing the setup of the treatment. Conclusions: The variability in the size and shape of the customized posterior supports exceeded that of 'standard' headrests. It is our clinical impression that the customized supports improve reproducibility and are now a standard part of our immobilization system. The quantitative analysis of the customized headrests and some commonly used 'standard' headrests suggests that the customized supports are better able to address variabilities in patient shape

  5. Fundamental Drop Dynamics and Mass Transfer Experiments to Support Solvent Extraction Modeling Efforts

    International Nuclear Information System (INIS)

    Christensen, Kristi; Rutledge, Veronica; Garn, Troy

    2011-01-01

    In support of the Nuclear Energy Advanced Modeling Simulation Safeguards and Separations (NEAMS SafeSep) program, the Idaho National Laboratory (INL) worked in collaboration with Los Alamos National Laboratory (LANL) to further a modeling effort designed to predict mass transfer behavior for selected metal species between individual dispersed drops and a continuous phase in a two phase liquid-liquid extraction (LLE) system. The purpose of the model is to understand the fundamental processes of mass transfer that occur at the drop interface. This fundamental understanding can be extended to support modeling of larger LLE equipment such as mixer settlers, pulse columns, and centrifugal contactors. The work performed at the INL involved gathering the necessary experimental data to support the modeling effort. A custom experimental apparatus was designed and built for performing drop contact experiments to measure mass transfer coefficients as a function of contact time. A high speed digital camera was used in conjunction with the apparatus to measure size, shape, and velocity of the drops. In addition to drop data, the physical properties of the experimental fluids were measured to be used as input data for the model. Physical properties measurements included density, viscosity, surface tension and interfacial tension. Additionally, self diffusion coefficients for the selected metal species in each experimental solution were measured, and the distribution coefficient for the metal partitioning between phases was determined. At the completion of this work, the INL has determined the mass transfer coefficient and a velocity profile for drops rising by buoyancy through a continuous medium under a specific set of experimental conditions. Additionally, a complete set of experimentally determined fluid properties has been obtained. All data will be provided to LANL to support the modeling effort.

  6. Framework for product knowledge and product related knowledge which supports product modelling for mass customization

    DEFF Research Database (Denmark)

    Riis, Jesper; Hansen, Benjamin Loer; Hvam, Lars

    2003-01-01

    on experience from product modelling projects in several companies. Among them for example companies manufacturing electronic switchboards, spray dryer systems and air conditioning equipment. The framework is divided into three views: the product knowledge view, the life phase system view and the transformation...... and personalization. The framework for product knowledge and product related knowledge is based on the following theories: axiomatic design, technical systems, theory of domains, theory of structuring, theory of properties and the framework for the content of product and product related models. The framework is built......The article presents a framework for product knowledge and product related knowledge which can be used to support the product modelling process which is needed for developing IT systems. These IT systems are important tools for many companies when they aim at achieving mass customization...

  7. Tongue motor training support system.

    Science.gov (United States)

    Sasaki, Makoto; Onishi, Kohei; Nakayama, Atsushi; Kamata, Katsuhiro; Stefanov, Dimitar; Yamaguchi, Masaki

    2014-01-01

    In this paper, we introduce a new tongue-training system that can be used for improvement of the tongue's range of motion and muscle strength after dysphagia. The training process is organized in game-like manner. Initially, we analyzed surface electromyography (EMG) signals of the suprahyoid muscles of five subjects during tongue-training motions. This test revealed that four types tongue training motions and a swallowing motion could be classified with 93.5% accuracy. Recognized EMG signals during tongue motions were designed to allow control of a mouse cursor via intentional tongue motions. Results demonstrated that simple PC games could be played by tongue motions, achieving in this way efficient, enjoyable and pleasant tongue training. Using the proposed method, dysphagia patients can choose games that suit their preferences and/or state of mind. It is expected that the proposed system will be an efficient tool for long-term tongue motor training and maintaining patients' motivation.

  8. Supporting Multiple Cognitive Processing Styles Using Tailored Support Systems

    International Nuclear Information System (INIS)

    Tuan Q. Tran; Karen M. Feigh; Amy R. Pritchett

    2007-01-01

    According to theories of cognitive processing style or cognitive control mode, human performance is more effective when an individual's cognitive state (e.g., intuition/scramble vs. deliberate/strategic) matches his/her ecological constraints or context (e.g., utilize intuition to strive for a 'good-enough' response instead of deliberating for the 'best' response under high time pressure). Ill-mapping between cognitive state and ecological constraints are believed to lead to degraded task performance. Consequently, incorporating support systems which are designed to specifically address multiple cognitive and functional states e.g., high workload, stress, boredom, and initiate appropriate mitigation strategies (e.g., reduce information load) is essential to reduce plant risk. Utilizing the concept of Cognitive Control Models, this paper will discuss the importance of tailoring support systems to match an operator's cognitive state, and will further discuss the importance of these ecological constraints in selecting and implementing mitigation strategies for safe and effective system performance. An example from the nuclear power plant industry illustrating how a support system might be tailored to support different cognitive states is included

  9. Mass Properties for Space Systems Standards Development

    Science.gov (United States)

    Beech, Geoffrey

    2013-01-01

    Current Verbiage in S-120 Applies to Dry Mass. Mass Margin is difference between Required Mass and Predicted Mass. Performance Margin is difference between Predicted Performance and Required Performance. Performance estimates and corresponding margin should be based on Predicted Mass (and other inputs). Contractor Mass Margin reserved from Performance Margin. Remaining performance margin allocated according to mass partials. Compliance can be evaluated effectively by comparison of three areas (preferably on a single sheet). Basic and Predicted Mass (including historical trend). Aggregate potential changes (threats and opportunities) which gives Mass Forecast. Mass Maturity by category (Estimated/Calculated/Actual).

  10. Life Support Systems: Oxygen Generation and Recovery

    Data.gov (United States)

    National Aeronautics and Space Administration — The Advanced Exploration Systems (AES) Life Support Systems project Oxygen Generation and Recovery technology development area encompasses several sub-tasks in an...

  11. MINDS - Medical Information Network Decision Support System

    National Research Council Canada - National Science Library

    Armenian, H. K

    2008-01-01

    .... The increase in and complexity of medical data at various levels of resolution has increased the need for system level advancements in clinical decision support systems that provide computer-aided...

  12. Operating-System Support for Distributed Multimedia

    NARCIS (Netherlands)

    Mullender, Sape J.; Leslie, Ian M.; McAuley, Derek

    1994-01-01

    Multimedia applications place new demands upon processors, networks and operating systems. While some network designers, through ATM for example, have considered revolutionary approaches to supporting multimedia, the same cannot be said for operating systems designers. Most work is evolutionary in

  13. An intelligent interlock design support system

    International Nuclear Information System (INIS)

    Hayashi, Toshifumi; Kamiyama, Masahiko

    1990-01-01

    This paper presents an intelligent interlock design support system, called Handy. BWR plant interlocks have been designed on a conventional CAD system operating on a mini-computer based time sharing system. However, its ability to support interlock designers is limited, mainly due to the system not being capable of manipulating the interlock logic. Handy improves the design efficiency with consistent manipulation of the logic and drawings, interlock simulation, versatile database management, object oriented user interface, high resolution high speed graphics, and automatic interlock outlining with a design support expert system. Handy is now being tested by designers, and is expected to greatly contribute to their efficiency. (author)

  14. Mass and Reliability System (MaRS)

    Science.gov (United States)

    Barnes, Sarah

    2016-01-01

    The Safety and Mission Assurance (S&MA) Directorate is responsible for mitigating risk, providing system safety, and lowering risk for space programs from ground to space. The S&MA is divided into 4 divisions: The Space Exploration Division (NC), the International Space Station Division (NE), the Safety & Test Operations Division (NS), and the Quality and Flight Equipment Division (NT). The interns, myself and Arun Aruljothi, will be working with the Risk & Reliability Analysis Branch under the NC Division's. The mission of this division is to identify, characterize, diminish, and communicate risk by implementing an efficient and effective assurance model. The team utilizes Reliability and Maintainability (R&M) and Probabilistic Risk Assessment (PRA) to ensure decisions concerning risks are informed, vehicles are safe and reliable, and program/project requirements are realistic and realized. This project pertains to the Orion mission, so it is geared toward a long duration Human Space Flight Program(s). For space missions, payload is a critical concept; balancing what hardware can be replaced by components verse by Orbital Replacement Units (ORU) or subassemblies is key. For this effort a database was created that combines mass and reliability data, called Mass and Reliability System or MaRS. The U.S. International Space Station (ISS) components are used as reference parts in the MaRS database. Using ISS components as a platform is beneficial because of the historical context and the environment similarities to a space flight mission. MaRS uses a combination of systems: International Space Station PART for failure data, Vehicle Master Database (VMDB) for ORU & components, Maintenance & Analysis Data Set (MADS) for operation hours and other pertinent data, & Hardware History Retrieval System (HHRS) for unit weights. MaRS is populated using a Visual Basic Application. Once populated, the excel spreadsheet is comprised of information on ISS components including

  15. Strata control in tunnels and an evaluation of support units and systems currently used with a view to improving the effectiveness of support, stability and safety of tunnels.

    CSIR Research Space (South Africa)

    Haile, AT

    1998-12-01

    Full Text Available This report details a methodology for rational design of tunnel support systems based on a mechanistic evaluation of the interaction between the components of a tunnel support system and a highly discontinuous rock mass structure. This analysis...

  16. Developing Sustainable Life Support System Concepts

    Science.gov (United States)

    Thomas, Evan A.

    2010-01-01

    Sustainable spacecraft life support concepts may allow the development of more reliable technologies for long duration space missions. Currently, life support technologies at different levels of development are not well evaluated against each other, and evaluation methods do not account for long term reliability and sustainability of the hardware. This paper presents point-of-departure sustainability evaluation criteria for life support systems, that may allow more robust technology development, testing and comparison. An example sustainable water recovery system concept is presented.

  17. Business Management System Support Analysis

    Science.gov (United States)

    Parikh, Jay

    2008-01-01

    The purpose of this research project was to develop a searchable database compiled with internal and external audit findings/observations. The data will correspond to the findings and observations from the date of Center-wide implementation of the ISO 9001-2000 standard to the present (2003-2008). It was derived and extracted from several sources and was in multiple formats. Once extracted, categorization of the findings/observations would be possible. The final data was mapped to the ISO 9001-2000 standard with the understanding that it will be displayed graphically. The data will be used to verify trends, associate risks, and establish timelines to identify strengths and weaknesses to determine areas of improvement in the Kennedy Space Center Business Management System Internal Audit Program.

  18. Need for Cost Optimization of Space Life Support Systems

    Science.gov (United States)

    Jones, Harry W.; Anderson, Grant

    2017-01-01

    As the nation plans manned missions that go far beyond Earth orbit to Mars, there is an urgent need for a robust, disciplined systems engineering methodology that can identify an optimized Environmental Control and Life Support (ECLSS) architecture for long duration deep space missions. But unlike the previously used Equivalent System Mass (ESM), the method must be inclusive of all driving parameters and emphasize the economic analysis of life support system design. The key parameter for this analysis is Life Cycle Cost (LCC). LCC takes into account the cost for development and qualification of the system, launch costs, operational costs, maintenance costs and all other relevant and associated costs. Additionally, an effective methodology must consider system technical performance, safety, reliability, maintainability, crew time, and other factors that could affect the overall merit of the life support system.

  19. Climate data system supports FIRE

    Science.gov (United States)

    Olsen, Lola M.; Iascone, Dominick; Reph, Mary G.

    1990-01-01

    The NASA Climate Data System (NCDS) at Goddard Space Flight Center is serving as the FIRE Central Archive, providing a centralized data holding and data cataloging service for the FIRE project. NCDS members are carrying out their responsibilities by holding all reduced observations and data analysis products submitted by individual principal investigators in the agreed upon format, by holding all satellite data sets required for FIRE, by providing copies of any of these data sets to FIRE investigators, and by producing and updating a catalog with information about the FIRE holdings. FIRE researchers were requested to provide their reduced data sets in the Standard Data Format (SDF) to the FIRE Central Archive. This standard format is proving to be of value. An improved SDF document is now available. The document provides an example from an actual FIRE SDF data set and clearly states the guidelines for formatting data in SDF. NCDS has received SDF tapes from a number of investigators. These tapes were analyzed and comments provided to the producers. One product which is now available is William J. Syrett's sodar data product from the Stratocumulus Intensive Field Observation. Sample plots from all SDF tapes submitted to the archive will be available to FSET members. Related cloud products are also available through NCDS. Entries describing the FIRE data sets are being provided for the NCDS on-line catalog. Detailed information for the Extended Time Observations is available in the general FIRE catalog entry. Separate catalog entries are being written for the Cirrus Intensive Field Observation (IFO) and for the Marine Stratocumulus IFO. Short descriptions of each FIRE data set will be installed into the NCDS Summary Catalog.

  20. Mass loss from interacting close binary systems

    Science.gov (United States)

    Plavec, M. J.

    1981-01-01

    The three well-defined classes of evolved binary systems that show evidence of present and/or past mass loss are the cataclysmic variables, the Algols, and Wolf-Rayet stars. It is thought that the transformation of supergiant binary systems into the very short-period cataclysmic variables must have been a complex process. The new evidence that has recently been obtained from the far ultraviolet spectra that a certain subclass of the Algols (the Serpentids) are undergoing fairly rapid evolution is discussed. It is thought probable that the remarkable mass outflow observed in them is connected with a strong wind powered by accretion. The origin of the circumbinary clouds or flat disks that probably surround many strongly interacting binaries is not clear. Attention is also given to binary systems with hot white dwarf or subdwarf components, such as the symbiotic objects and the BQ stars; it is noted that in them both components may be prone to an enhanced stellar wind.

  1. Network support for system initiated checkpoints

    Science.gov (United States)

    Chen, Dong; Heidelberger, Philip

    2013-01-29

    A system, method and computer program product for supporting system initiated checkpoints in parallel computing systems. The system and method generates selective control signals to perform checkpointing of system related data in presence of messaging activity associated with a user application running at the node. The checkpointing is initiated by the system such that checkpoint data of a plurality of network nodes may be obtained even in the presence of user applications running on highly parallel computers that include ongoing user messaging activity.

  2. A novel featureless approach to mass detection in digital mammograms based on support vector machines

    Energy Technology Data Exchange (ETDEWEB)

    Campanini, Renato [Department of Physics, University of Bologna, and INFN, Bologna (Italy); Dongiovanni, Danilo [Department of Physics, University of Bologna, and INFN, Bologna (Italy); Iampieri, Emiro [Department of Physics, University of Bologna, and INFN, Bologna (Italy); Lanconelli, Nico [Department of Physics, University of Bologna, and INFN, Bologna (Italy); Masotti, Matteo [Department of Physics, University of Bologna, and INFN, Bologna (Italy); Palermo, Giuseppe [Department of Physics, University of Bologna, and INFN, Bologna (Italy); Riccardi, Alessandro [Department of Physics, University of Bologna, and INFN, Bologna (Italy); Roffilli, Matteo [Department of Computer Science, University of Bologna, Bologna (Italy)

    2004-03-21

    In this work, we present a novel approach to mass detection in digital mammograms. The great variability of the appearance of masses is the main obstacle to building a mass detection method. It is indeed demanding to characterize all the varieties of masses with a reduced set of features. Hence, in our approach we have chosen not to extract any feature, for the detection of the region of interest; in contrast, we exploit all the information available on the image. A multiresolution overcomplete wavelet representation is performed, in order to codify the image with redundancy of information. The vectors of the very-large space obtained are then provided to a first support vector machine (SVM) classifier. The detection task is considered here as a two-class pattern recognition problem: crops are classified as suspect or not, by using this SVM classifier. False candidates are eliminated with a second cascaded SVM. To further reduce the number of false positives, an ensemble of experts is applied: the final suspect regions are achieved by using a voting strategy. The sensitivity of the presented system is nearly 80% with a false-positive rate of 1.1 marks per image, estimated on images coming from the USF DDSM database.

  3. Precise Masses in the WASP-47 System

    Science.gov (United States)

    Vanderburg, Andrew; Becker, Juliette C.; Buchhave, Lars A.; Mortier, Annelies; Lopez, Eric; Malavolta, Luca; Haywood, Raphaëlle D.; Latham, David W.; Charbonneau, David; López-Morales, Mercedes; Adams, Fred C.; Bonomo, Aldo Stefano; Bouchy, François; Collier Cameron, Andrew; Cosentino, Rosario; Di Fabrizio, Luca; Dumusque, Xavier; Fiorenzano, Aldo; Harutyunyan, Avet; Johnson, John Asher; Lorenzi, Vania; Lovis, Christophe; Mayor, Michel; Micela, Giusi; Molinari, Emilio; Pedani, Marco; Pepe, Francesco; Piotto, Giampaolo; Phillips, David; Rice, Ken; Sasselov, Dimitar; Ségransan, Damien; Sozzetti, Alessandro; Udry, Stéphane; Watson, Chris

    2017-12-01

    We present precise radial velocity observations of WASP-47, a star known to host a hot Jupiter, a distant Jovian companion, and, uniquely, two additional transiting planets in short-period orbits: a super-Earth in a ≈19 hr orbit, and a Neptune in a ≈9 day orbit. We analyze our observations from the HARPS-N spectrograph along with previously published data to measure the most precise planet masses yet for this system. When combined with new stellar parameters and reanalyzed transit photometry, our mass measurements place strong constraints on the compositions of the two small planets. We find that, unlike most other ultra-short-period planets, the inner planet, WASP-47 e, has a mass (6.83 ± 0.66 {M}\\oplus ) and a radius (1.810 ± 0.027 {R}\\oplus ) that are inconsistent with an Earth-like composition. Instead, WASP-47 e likely has a volatile-rich envelope surrounding an Earth-like core and mantle. We also perform a dynamical analysis to constrain the orbital inclination of WASP-47 c, the outer Jovian planet. This planet likely orbits close to the plane of the inner three planets, suggesting a quiet dynamical history for the system. Our dynamical constraints also imply that WASP-47 c is much more likely to transit than a geometric calculation would suggest. We calculate a transit probability for WASP-47 c of about 10%, more than an order of magnitude larger than the geometric transit probability of 0.6%.

  4. The 4th Civil Support Team (Weapons of Mass Destruction)

    International Nuclear Information System (INIS)

    Smith, D. L.

    2007-01-01

    The 4th CST (WMD) is a 22 person joint staffed AGR (Active Guard Reserve) unit of the Georgia National Guard. The team is one of 55 CSTs that are charged with responding to a CBRNE (Chemical, Biological, Radiological, Nuclear, and High Yield Explosive) incident within the United States and its Territories. The mission statements of the CTS is to support civil authorities at a domestic CBRNE incident by identifying CBRNE agents/substances, assessing current and projected consequences, advising on response measures, and assisting with appropriate requests for state support. The team possesses the capability to deploy by sea, air, and land in response to a terrorist attack or natural disaster. The team is comprised of seven officers and fifteen non-commissioned officers who are cross trained in a variety of military disciplines. Equipment assigned to the team includes an Analytical Lab, Communications Suite, Tactical Operations Center, closed and open circuit breathing gear, portable and handheld detectors, and decon support. The CSts are activated through a state's emergency response network.(author)

  5. Correlation between Rock mass rating, Q-system and Rock mass index based on field data

    Directory of Open Access Journals (Sweden)

    Soufi Amine

    2018-01-01

    The proposed regression models reveal strong correlations between RMR, Q and RMi indexes with high values of accuracy coefficients so that they can be used to estimate the “CPB3” underground rock mass quality for the range of RMR between 30% and 80%. The developed mathematical formulations of the geomechanicalindexes will certainly offer an effective tool to geologist and geotechnical professionals in the decision-making process, preliminary design phase, stability problems and suggestions of the required supporting system and techniques without the expense of more resources or time.

  6. Mathematical Modeling Of Life-Support Systems

    Science.gov (United States)

    Seshan, Panchalam K.; Ganapathi, Balasubramanian; Jan, Darrell L.; Ferrall, Joseph F.; Rohatgi, Naresh K.

    1994-01-01

    Generic hierarchical model of life-support system developed to facilitate comparisons of options in design of system. Model represents combinations of interdependent subsystems supporting microbes, plants, fish, and land animals (including humans). Generic model enables rapid configuration of variety of specific life support component models for tradeoff studies culminating in single system design. Enables rapid evaluation of effects of substituting alternate technologies and even entire groups of technologies and subsystems. Used to synthesize and analyze life-support systems ranging from relatively simple, nonregenerative units like aquariums to complex closed-loop systems aboard submarines or spacecraft. Model, called Generic Modular Flow Schematic (GMFS), coded in such chemical-process-simulation languages as Aspen Plus and expressed as three-dimensional spreadsheet.

  7. A Hyperknowledge Framework of Decision Support Systems.

    Science.gov (United States)

    Chang, Ai-Mei; And Others

    1994-01-01

    Presents a hyperknowledge framework of decision support systems (DSS). This framework formalizes specifics about system functionality, representation of knowledge, navigation of the knowledge system, and user-interface traits as elements of a DSS environment that conforms closely to human cognitive processes in decision making. (Contains 52…

  8. Decision support system for Wamakersvallei Winery

    CSIR Research Space (South Africa)

    Van Der Merwe, A

    2007-09-01

    Full Text Available The goal of the study is to lend decision support to management a a wine cellar in three areas of expertise, with Wamakersvallei Winery serving as a special case study. This decision support system is to be delivered in the form of Excel spreadsheet...

  9. Possible mass distributions in the nebulae of other solar systems

    International Nuclear Information System (INIS)

    Brown, W.K.

    1987-01-01

    The supernova shell fragmentation model of solar system formation - previously shown to be successful in describing the mass distribution of our solar system - is used to calculate the mass distributions of other solar nebulae. (Auth.)

  10. Rock mass classification system : transition from RMR to GSI.

    Science.gov (United States)

    2013-11-01

    The AASHTO LRFD Bridge Design Specifications is expected to replace the rock mass rating : (RMR) system with the Geological Strength Index (GSI) system for classifying and estimating : engineering properties of rock masses. This transition is motivat...

  11. Axiomatic Design of Space Life Support Systems

    Science.gov (United States)

    Jones, Harry W.

    2017-01-01

    Systems engineering is an organized way to design and develop systems, but the initial system design concepts are usually seen as the products of unexplained but highly creative intuition. Axiomatic design is a mathematical approach to produce and compare system architectures. The two axioms are:- Maintain the independence of the functional requirements.- Minimize the information content (or complexity) of the design. The first axiom generates good system design structures and the second axiom ranks them. The closed system human life support architecture now implemented in the International Space Station has been essentially unchanged for fifty years. In contrast, brief missions such as Apollo and Shuttle have used open loop life support. As mission length increases, greater system closure and increased recycling become more cost-effective.Closure can be gradually increased, first recycling humidity condensate, then hygiene wastewater, urine, carbon dioxide, and water recovery brine. A long term space station or planetary base could implement nearly full closure, including food production. Dynamic systems theory supports the axioms by showing that fewer requirements, fewer subsystems, and fewer interconnections all increase system stability. If systems are too complex and interconnected, reliability is reduced and operations and maintenance become more difficult. Using axiomatic design shows how the mission duration and other requirements determine the best life support system design including the degree of closure.

  12. QA CLASSIFICATION ANALYSIS OF GROUND SUPPORT SYSTEMS

    International Nuclear Information System (INIS)

    D. W. Gwyn

    1996-01-01

    The purpose and objective of this analysis is to determine if the permanent function Ground Support Systems (CI: BABEEOOOO) are quality-affecting items and if so, to establish the appropriate Quality Assurance (QA) classification

  13. AI User Support System for SAP ERP

    Science.gov (United States)

    Vlasov, Vladimir; Chebotareva, Victoria; Rakhimov, Marat; Kruglikov, Sergey

    2017-10-01

    An intelligent system for SAP ERP user support is proposed in this paper. It enables automatic replies on users’ requests for support, saving time for problem analysis and resolution and improving responsiveness for end users. The system is based on an ensemble of machine learning algorithms of multiclass text classification, providing efficient question understanding, and a special framework for evidence retrieval, providing the best answer derivation.

  14. Development of a simplified piping support system

    International Nuclear Information System (INIS)

    Leung, J.; Anderson, P.H.; Tang, Y.K.; Kassawara, R.P.; Tang, H.T.

    1987-01-01

    This paper presents the results of experimental and analytical studies for developing a simplified piping support system (SPSS) for nuclear power piping in place of snubbers. The basic concept of the SPSS is a passive seismic support system consisting of limit stops. Large gaps are provided to allow for free thermal expansion during normal plant operation while preventing excessive displacement during a seismic event. The results are part of a research and development program sponsored by EPRI. (orig./HP)

  15. Development of a simplified piping support system

    International Nuclear Information System (INIS)

    Leung, J.; Anderson, P.H.; Tang, Y.K.; Kassawara, R.P.; Tang, H.T.

    1987-01-01

    This paper presents the results of experimental and analytical studies for developing a simplified piping support system (SPSS) for nuclear power piping in place of snubbers. The basic concept of the SPSS is a passive seismic support system consisting of limit stops. Large gaps are provided to allow for free thermal expansion during normal plant operation while preventing excessive displacement during a seismic event. The results are part of a research and development program sponsored by the Electric Power Research Institute

  16. Airport Information Retrieval System (AIRS) System Support Manual

    Science.gov (United States)

    1973-01-01

    This handbook is a support manual for prototype air traffic flow control automation system developed for the FAA's Systems Command Center. The system is implemented on a time-sharing computer and is designed to provide airport traffic load prediction...

  17. Modeling the Motion of an Increasing Mass System

    Science.gov (United States)

    Kunkel, William; Harrington, Randal

    2010-01-01

    Problems on the dynamics of changing mass systems often call for the more general form of Newton's second law Fnet = dp/dt. These problems usually involve situations where the mass of the system decreases, such as in rocket propulsion. In contrast, this experiment examines a system where the mass "increases" at a constant rate and the net force…

  18. A digital squarer system for positive mass identification on the ARL ion microprobe mass analyser

    International Nuclear Information System (INIS)

    Woods, K.N.; Grant, L.D.V.; Rawsthorne, E.D.; Strydom, H.J.; Gries, W.H.

    1984-01-01

    The original analogue squarer for mass scale linearisation in the Ion Microprobe Mass Analyser (IMMA) has been replaced by a programmable digital squarer system which permits reliable mass number identification throughout the tested range 1 to 240. The digital squarer provides signals to both a digital direct reading mass number display and to an X-Y recorder where it provides a linear mass scale correct to within 0,3 mass units. An additional output to a computer can provide binary or BCD mass number data

  19. Panorama of recommender systems to support learning

    OpenAIRE

    Drachsler, Hendrik; Verbert, Katrien; Santos, Olga; Manouselis, Nikos

    2015-01-01

    This chapter presents an analysis of recommender systems in Technology-Enhanced Learning along their 15 years existence (2000-2014). All recommender systems considered for the review aim to support educational stakeholders by personalising the learning process. In this meta-review 82 recommender systems from 35 different countries have been investigated and categorised according to a given classification framework. The reviewed systems have been classified into 7 clusters according to their c...

  20. Toward the Modularization of Decision Support Systems

    Science.gov (United States)

    Raskin, R. G.

    2009-12-01

    Decision support systems are typically developed entirely from scratch without the use of modular components. This “stovepiped” approach is inefficient and costly because it prevents a developer from leveraging the data, models, tools, and services of other developers. Even when a decision support component is made available, it is difficult to know what problem it solves, how it relates to other components, or even that the component exists, The Spatial Decision Support (SDS) Consortium was formed in 2008 to organize the body of knowledge in SDS within a common portal. The portal identifies the canonical steps in the decision process and enables decision support components to be registered, categorized, and searched. This presentation describes how a decision support system can be assembled from modular models, data, tools and services, based on the needs of the Earth science application.

  1. Operator support systems activities at EPRI

    International Nuclear Information System (INIS)

    Naser, J.A.

    1993-01-01

    The integration of operator support systems supports the nuclear power plant goals of improved availability and reliability, enhanced safety, reduced operations and maintenance costs, and improved productivity. Two major aspects which supports this integration are discussed in this paper. The first is the plant communications and computing architecture which provides the infrastructure that allows the integration to exist in a easy to implement manner. Open systems concepts are utilized to guarantee interoperability of systems and interchangeability of equipment. The second is the EPRI Plant-Window System which supplies the interface between the human and the plant systems. It implements common human-machine interfaces amongst systems and supports the implementation of diagnostic and decision aids. Work in both of these areas is being done as part of the EPRI Instrumentation and Control Upgrade Program. A number of operator support systems have been developed and are in various stages of implementation, testing and utilization. Two of these, the RWCU and the EOPTS, are described here. 5 refs, 14 figs

  2. Life Support Filtration System Trade Study for Deep Space Missions

    Science.gov (United States)

    Agui, Juan H.; Perry, Jay L.

    2017-01-01

    The National Aeronautics and Space Administrations (NASA) technical developments for highly reliable life support systems aim to maximize the viability of long duration deep space missions. Among the life support system functions, airborne particulate matter filtration is a significant driver of launch mass because of the large geometry required to provide adequate filtration performance and because of the number of replacement filters needed to a sustain a mission. A trade analysis incorporating various launch, operational and maintenance parameters was conducted to investigate the trade-offs between the various particulate matter filtration configurations. In addition to typical launch parameters such as mass, volume and power, the amount of crew time dedicated to system maintenance becomes an increasingly crucial factor for long duration missions. The trade analysis evaluated these parameters for conventional particulate matter filtration technologies and a new multi-stage particulate matter filtration system under development by NASAs Glenn Research Center. The multi-stage filtration system features modular components that allow for physical configuration flexibility. Specifically, the filtration system components can be configured in distributed, centralized, and hybrid physical layouts that can result in considerable mass savings compared to conventional particulate matter filtration technologies. The trade analysis results are presented and implications for future transit and surface missions are discussed.

  3. Adopting Product Modularity in House Building to Support Mass Customisation

    Directory of Open Access Journals (Sweden)

    Cecília G. da Rocha

    2015-04-01

    Full Text Available Product modularity is a concept that can contribute to the improvement of product quality and production efficiency in house-building. However, there is a lack of consensus in the literature on the concepts that define product modularity. Furthermore, little attention has been given to the differences between building construction and manufacturing, for which product modularity was originally developed. This research aims to address that gap by adapting the conceptualization of product modularity so that it can effectively be used in the house-building industry. The methodological approach adopted in this study was Design Science Research, and two empirical studies were carried out on construction companies based in Brazil and in the U.K. Those studies are used to illustrate the applicability and utility of the proposed concepts and tools. Research findings indicate that the adoption of product modularity concepts results in benefits to both traditional construction technologies and pre-fabricated building systems.

  4. Learning to Control Advanced Life Support Systems

    Science.gov (United States)

    Subramanian, Devika

    2004-01-01

    Advanced life support systems have many interacting processes and limited resources. Controlling and optimizing advanced life support systems presents unique challenges. In particular, advanced life support systems are nonlinear coupled dynamical systems and it is difficult for humans to take all interactions into account to design an effective control strategy. In this project. we developed several reinforcement learning controllers that actively explore the space of possible control strategies, guided by rewards from a user specified long term objective function. We evaluated these controllers using a discrete event simulation of an advanced life support system. This simulation, called BioSim, designed by Nasa scientists David Kortenkamp and Scott Bell has multiple, interacting life support modules including crew, food production, air revitalization, water recovery, solid waste incineration and power. They are implemented in a consumer/producer relationship in which certain modules produce resources that are consumed by other modules. Stores hold resources between modules. Control of this simulation is via adjusting flows of resources between modules and into/out of stores. We developed adaptive algorithms that control the flow of resources in BioSim. Our learning algorithms discovered several ingenious strategies for maximizing mission length by controlling the air and water recycling systems as well as crop planting schedules. By exploiting non-linearities in the overall system dynamics, the learned controllers easily out- performed controllers written by human experts. In sum, we accomplished three goals. We (1) developed foundations for learning models of coupled dynamical systems by active exploration of the state space, (2) developed and tested algorithms that learn to efficiently control air and water recycling processes as well as crop scheduling in Biosim, and (3) developed an understanding of the role machine learning in designing control systems for

  5. Panorama of Recommender Systems to Support Learning

    NARCIS (Netherlands)

    Drachsler, Hendrik; Verbert, Katrien; Santos, Olga C.; Manouselis, Nikos

    2015-01-01

    This chapter presents an analysis of recommender systems in TechnologyEnhanced Learning along their 15 years existence (2000-2014). All recommender systems considered for the review aim to support educational stakeholders by personalising the learning process. In this meta-review 82 recommender

  6. A review of lateral driver support systems

    NARCIS (Netherlands)

    Tideman, Martijn; van der Voort, Mascha C.; van Arem, Bart; Tillema, Frans; Dailey, D.

    2007-01-01

    Lateral driver support systems have the potential to reduce the number of accidents associated with -both intentional and unintentional -lane departures. Additionally, such systems may increase driving comfort and stimulate a more efficient traffic flow, thereby reducing traffic emissions and the

  7. Intelligent tactical asset allocation support system

    NARCIS (Netherlands)

    Hiemstra, Y.

    1995-01-01

    This paper presents an advanced support system for Tactical Asset Allocation. Asset allocation explains over 90% of portfolio performance (Brinson, Hood and Beebower, 1988). Tactical asset allocation adjusts a strategic portfolio on the basis of short term market outlooks. The system includes

  8. A SWOT analysis of Planning Support Systems

    NARCIS (Netherlands)

    Vonk, G.; Geertman, S.; Schot, P.P.

    2007-01-01

    Insight into the strengths, weaknesses, opportunities, and threats (SWOT) of planning support systems (PSS) is fragmented between users and system developers. The lack of combined insights blocks development in the right direction and makes potential users hesitant to apply PSS in planning. This

  9. Nutritional support for the infant's immune system

    NARCIS (Netherlands)

    Niers, L.; Stasse-Wolthuis, M.; Rombouts, F.M.; Rijkers, G.T.

    2007-01-01

    Newborn babies possess a functional but immature immune system as a defense against a world teeming with microorganisms. Breast milk contains a number of biological, active compounds that support the infant's immune system. These include secretory immunoglobulin A (IgA), which confers specific

  10. Support system for Neutron Activation Analysis

    International Nuclear Information System (INIS)

    Sasajima, Fumio; Ohtomo, Akitoshi; Sakurai, Fumio; Onizawa, Koji

    1999-01-01

    In the research reactor of JAERI, the Neutron Activation Analysis (NAA) has been utilized as a major part of an irradiation usage. To utilize NAA, research participants are always required to learn necessary technique. Therefore, we started to examine a support system that will enable to carry out INAA easily even by beginners. The system is composed of irradiation device, gamma-ray spectrometer and data analyzing instruments. The element concentration is calculated by using KAYZERO/SOLCOI software with the K 0 standardization method. In this paper, we review on a construction of this INAA support system in JRR-3M of JAERI. (author)

  11. Preparing for a decision support system.

    Science.gov (United States)

    Callan, K

    2000-08-01

    The increasing pressure to reduce costs and improve outcomes is driving the health care industry to view information as a competitive advantage. Timely information is required to help reduce inefficiencies and improve patient care. Numerous disparate operational or transactional information systems with inconsistent and often conflicting data are no longer adequate to meet the information needs of integrated care delivery systems and networks in competitive managed care environments. This article reviews decision support system characteristics and describes a process to assess the preparedness of an organization to implement and use decision support systems to achieve a more effective, information-based decision process. Decision support tools included in this article range from reports to data mining.

  12. Operator Support System for Pressurized Water Reactor

    International Nuclear Information System (INIS)

    Wei Renjie; Shen Shifei

    1996-01-01

    Operator Support System for Pressurized Water Reactor (OSSPWR) has been developed under the sponsorship of IAEA from August 1994. The project is being carried out by the Department of Engineering Physics, Tsinghua University, Beijing, China. The Design concepts of the operator support functions have been established. The prototype systems of OSSPWR has been developed as well. The primary goal of the project is to create an advanced operator support system by applying new technologies such as artificial intelligence (AI) techniques, advanced communication technologies, etc. Recently, the advanced man-machine interface for nuclear power plant operators has been developed. It is connected to the modern computer systems and utilizes new high performance graphic displays. (author). 6 refs, 4 figs

  13. Nuclear technology: katulong sa pag-unlad ng masa [support for the progress of the masses

    International Nuclear Information System (INIS)

    1999-01-01

    The topics discussed during the convention is the usefulness of nuclear science and technology in national development and to promote the beneficial uses of nuclear science and technology to support for the progress of the masses

  14. Dose calculation system for remotely supporting radiotherapy

    International Nuclear Information System (INIS)

    Saito, K.; Kunieda, E.; Narita, Y.; Kimura, H.; Hirai, M.; Deloar, H. M.; Kaneko, K.; Ozaki, M.; Fujisaki, T.; Myojoyama, A.; Saitoh, H.

    2005-01-01

    The dose calculation system IMAGINE is being developed keeping in mind remotely supporting external radiation therapy using photon beams. The system is expected to provide an accurate picture of the dose distribution in a patient body, using a Monte Carlo calculation that employs precise models of the patient body and irradiation head. The dose calculation will be performed utilising super-parallel computing at the dose calculation centre, which is equipped with the ITBL computer, and the calculated results will be transferred through a network. The system is intended to support the quality assurance of current, widely carried out radiotherapy and, further, to promote the prevalence of advanced radiotherapy. Prototypes of the modules constituting the system have already been constructed and used to obtain basic data that are necessary in order to decide on the concrete design of the system. The final system will be completed in 2007. (authors)

  15. Infrastructure Support for Collaborative Pervasive Computing Systems

    DEFF Research Database (Denmark)

    Vestergaard Mogensen, Martin

    Collaborative Pervasive Computing Systems (CPCS) are currently being deployed to support areas such as clinical work, emergency situations, education, ad-hoc meetings, and other areas involving information sharing and collaboration.These systems allow the users to work together synchronously......, but from different places, by sharing information and coordinating activities. Several researchers have shown the value of such distributed collaborative systems. However, building these systems is by no means a trivial task and introduces a lot of yet unanswered questions. The aforementioned areas......, are all characterized by unstable, volatile environments, either due to the underlying components changing or the nomadic work habits of users. A major challenge, for the creators of collaborative pervasive computing systems, is the construction of infrastructures supporting the system. The complexity...

  16. Life-cycle-Based (LCB) online acquisition framework for supporting Mass Customisation (MC) in practice.

    OpenAIRE

    Tang, S. J.; Tjahjono, Benny; Kay, John M.

    2006-01-01

    Mass Customisation (MC) has been perceived in many articles as a strategy of choice for any company. However, Mass Customisation (MC) can be easily discussed at a strategic level; but it is rather more complicated to undertake it organisationally and operationally. The aim of this paper is to explore an effective framework that can support the development of Mass Customisation approaches. Two main contributions are addressed in this paper. One is to prove the insufficiency o...

  17. Operator support system for nuclear power plants

    International Nuclear Information System (INIS)

    Mori, Nobuyuki; Tai, Ichiro; Sudo, Osamu; Naito, Norio.

    1987-01-01

    The nuclear power generation in Japan maintains the high capacity factor, and its proportion taken in the total generated electric power exceeded 1/4, thus it has become the indispensable energy source. Recently moreover, the nuclear power plants which are harmonious with operators and easy to operate are demanded. For realizing this, the technical development such as the heightening of operation watching performance, the adoption of automation, and the improvement of various man-machine systems for reducing the burden of operators has been advanced by utilizing electronic techniques. In this paper, the trend of the man-machine systems in nuclear power plants, the positioning of operation support system, the support in the aspects of information, action and knowledge, the example of a new central control board, the operation support system using a computer, an operation support expert system and the problems hereafter are described. As the development of the man-machine system in nuclear power plants, the upgrading from a present new central control board system PODIA through A-PODIA, in which the operational function to deal with various phenomena arising in plants and safety control function are added, to 1-PODIA, in which knowledge engineering technology is adopted, is expected. (Kako, I.)

  18. Support system for ATLAS distributed computing operations

    CERN Document Server

    Kishimoto, Tomoe; The ATLAS collaboration

    2018-01-01

    The ATLAS distributed computing system has allowed the experiment to successfully meet the challenges of LHC Run 2. In order for distributed computing to operate smoothly and efficiently, several support teams are organized in the ATLAS experiment. The ADCoS (ATLAS Distributed Computing Operation Shifts) is a dedicated group of shifters who follow and report failing jobs, failing data transfers between sites, degradation of ATLAS central computing services, and more. The DAST (Distributed Analysis Support Team) provides user support to resolve issues related to running distributed analysis on the grid. The CRC (Computing Run Coordinator) maintains a global view of the day-to-day operations. In this presentation, the status and operational experience of the support system for ATLAS distributed computing in LHC Run 2 will be reported. This report also includes operations experience from the grid site point of view, and an analysis of the errors that create the biggest waste of wallclock time. The report of oper...

  19. System Design for Transitional Aircraft Support

    Directory of Open Access Journals (Sweden)

    John P.T. Mo

    2014-01-01

    Full Text Available The Australian Defence Force and industry are undergoing significant changes in the way they work together in capability enhancement programs. There are capability gaps in maintaining and supporting current obligations during major asset acquisition, which has migrated into the front line of Royal Air Force Fighter Groups as a new capability. This paper examines a steady state support solution and argues that in order to interchange from one support solution to a new architecture there must be a period for transition, which may need its own interim business model and operational service. A preliminary study of several existing support solutions reveals the generic elements that need to be parameterized and traced through the support system architecture trajectory.

  20. Monitoring support system for nuclear power plant

    International Nuclear Information System (INIS)

    Higashikawa, Yuichi; Kubota, Rhuji; Tanaka, Keiji; Takano, Yoshiyuki

    1996-01-01

    The nuclear power plants in Japan reach to 49 plants and supply 41.19 million kW in their installed capacities, which is equal to about 31% of total electric power generation and has occupied an important situation as a stable energy supplying source. As an aim to keeping safe operation and working rate of the power plants, various monitoring support systems using computer technology, optical information technology and robot technology each advanced rapidly in recent year have been developed to apply to the actual plants for a plant state monitoring system of operators in normal operation. Furthermore, introduction of the emergent support system supposed on accidental formation of abnormal state of the power plants is also investigated. In this paper, as a monitoring system in the recent nuclear power plants, design of control panel of recent central control room, introduction to its actual plant and monitoring support system in development were described in viewpoints of improvement of human interface, upgrade of sensor and signal processing techniques, and promotion of information service technique. And, trend of research and development of portable miniature detector and emergent monitoring support system are also introduced in a viewpoint of labor saving and upgrade of the operating field. (G.K.)

  1. Binary Systems and the Initial Mass Function

    Science.gov (United States)

    Malkov, O. Yu.

    2017-07-01

    In the present paper we discuss advantages and disadvantages of binary stars, which are important for star formation history determination. We show that to make definite conclusions of the initial mass function shape, it is necessary to study binary population well enough to correct the luminosity function for unresolved binaries; to construct the mass-luminosity relation based on wide binaries data, and to separate observational mass functions of primaries, of secondaries, and of unresolved binaries.

  2. PLM system support for modular product development

    DEFF Research Database (Denmark)

    Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik; Harlou, Ulf

    2015-01-01

    A modular design strategy both enables, but also demands, parallelism in design activities and collaboration between a diversity of disciplines in companies, which often involves supporting computer-based tools for enhancing interaction, design management, and communication. Product data management...... (PDM) and product lifecycle management (PLM) systems offer support by automating and managing some of the operational complexity of modular design activities. PLM system tools are used for handling a variety of product definitions, to manage workflow of development activities, and to measure relational...... properties such as cost and performance. Companies often use a PLM tool for management of CAD files, documents, and drawings, but they do not take advantage of the full potential of the PLM system to support the development activities of modular product designs. The key result of this paper...

  3. A Model of Equilibrium Conditions of Roof Rock Mass Giving Consideration to the Yielding Capacity of Powered Supports

    Science.gov (United States)

    Jaszczuk, Marek; Pawlikowski, Arkadiusz

    2017-12-01

    The work presents the model of interactions between the powered roof support units and the rock mass, while giving consideration to the yielding capacity of the supports - a value used for the analysis of equilibrium conditions of roof rock mass strata in geological and mining conditions of a given longwall. In the model, the roof rock mass is kept in equilibrium by: support units, the seam, goafs, and caving rocks (Fig. 1). In the assumed model of external load on the powered roof support units it is a new development - in relation to the model applied in selection of supports based on the allowable deflection of roof theory - that the load bearing capacity is dependent on the increment of the inclination of the roof rock mass and on the properties of the working medium, while giving consideration to the air pockets in the hydraulic systems, the load of the caving rocks on the caving shield, introducing the RA support value of the roof rock mass by the coal seam as a closed-form expression and while giving consideration to the additional support provided by the rocks of the goaf as a horizontal component R01H of the goaf reaction. To determine the roof maintenance conditions it is necessary to know the characteristics linking the yielding capacity of the support units with the heading convergence, which may be measured as the inclination angle of the roof rock mass. In worldwide mining, Ground Reaction Curves are used, which allow to determine the required yielding capacity of support units based on the relation between the load exerted on the unit and the convergence of the heading ensuring the equilibrium of the roof rock mass. (Figs. 4 and 8). The equilibrium of the roof rock mass in given conditions is determined at the displacement of the rock mass by the α angle, which impacts the following values: yielding capacity of units FN, vertical component of goaf reaction R01V and the horizontal component of goaf reaction R01H. In the model of load on the support

  4. Lunar Surface Systems Supportability Technology Development Roadmap

    Science.gov (United States)

    Oeftering, Richard C.; Struk, Peter M.; Green, Jennifer L.; Chau, Savio N.; Curell, Philip C.; Dempsey, Cathy A.; Patterson, Linda P.; Robbins, William; Steele, Michael A.; DAnnunzio, Anthony; hide

    2011-01-01

    The Lunar Surface Systems Supportability Technology Development Roadmap is a guide for developing the technologies needed to enable the supportable, sustainable, and affordable exploration of the Moon and other destinations beyond Earth. Supportability is defined in terms of space maintenance, repair, and related logistics. This report considers the supportability lessons learned from NASA and the Department of Defense. Lunar Outpost supportability needs are summarized, and a supportability technology strategy is established to make the transition from high logistics dependence to logistics independence. This strategy will enable flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. The supportability roadmap defines the general technology selection criteria. Technologies are organized into three categories: diagnostics, test, and verification; maintenance and repair; and scavenge and recycle. Furthermore, "embedded technologies" and "process technologies" are used to designate distinct technology types with different development cycles. The roadmap examines the current technology readiness level and lays out a four-phase incremental development schedule with selection decision gates. The supportability technology roadmap is intended to develop technologies with the widest possible capability and utility while minimizing the impact on crew time and training and remaining within the time and cost constraints of the program.

  5. Using Visualization in Cockpit Decision Support Systems

    Energy Technology Data Exchange (ETDEWEB)

    Aragon, Cecilia R.

    2005-07-01

    In order to safely operate their aircraft, pilots must makerapid decisions based on integrating and processing large amounts ofheterogeneous information. Visual displays are often the most efficientmethod of presenting safety-critical data to pilots in real time.However, care must be taken to ensure the pilot is provided with theappropriate amount of information to make effective decisions and notbecome cognitively overloaded. The results of two usability studies of aprototype airflow hazard visualization cockpit decision support systemare summarized. The studies demonstrate that such a system significantlyimproves the performance of helicopter pilots landing under turbulentconditions. Based on these results, design principles and implicationsfor cockpit decision support systems using visualization arepresented.

  6. Intelligent systems supporting the control room operators

    International Nuclear Information System (INIS)

    Berger, E.

    1997-01-01

    The operational experience obtained with the various applications of the systems discussed in this paper shows that more consequent use of the systems will make detection and management of disturbances still more efficient and faster. This holds true both for a low level of process automation and for power plants with a high level of automation. As for conventional power plants, the trend clearly is towards higher degrees of automation and consequent application of supporting systems. Thus, higher availability and rapid failure management are achieved, at low effects on normal operation. These systems are monitoring and process control systems, expert systems, and systems for optimal use of the equipment, or systems for post-incident analyses and computer-assisted on-shift protocols, or operating manuals. (orig./CB) [de

  7. ACADEMIC INTEGRITY SUPPORT SYSTEM FOR UKRAINIAN UNIVERSITIES

    Directory of Open Access Journals (Sweden)

    V. G. Sherstjuk

    2017-04-01

    Full Text Available Purpose. Developing the methodology for providing academic integrity in the university. The methodology is based on Web-oriented academic integrity support system, developed by the authors, which enters into the information system of learning process control. Academic integrity support system is aimed at maintaining academic integrity as a basic institutional value, which will help to reduce corruption, plagiarism and other types of academic dishonesty. Methodology. The methodology of problem to solve is based on the development of the information system of education process control with the integral elements of quality control. The information subsystem of academic integrity support is its basic part. Findings. The proposed information system allows us to fulfill the following levels: educational process monitoring; audit of internal processes, which is necessary for developing the effective quality control system; assessment of achievements of educational process participants; formalization of the interaction of educational process participants. The system is aimed at the development of new academic society based on the following principles: open access to the information, at which the access of wide audience to the information provides participation, forming the sense of responsibility and social control; transparency of the information, by which its relevance, quality, reliability are meant; responsibility of all members of educational process; measurability, at which any action in educational process should be measured; detail of describing the actions, results and processes; support, which is meant by automatic tools of the realization of the principles of open access to the information, transparency of the information, responsibility of all participants of educational process, measurability, detail, support. The practical realization of information system is based on the development of a common repository of university information. The

  8. Support for User Interfaces for Distributed Systems

    Science.gov (United States)

    Eychaner, Glenn; Niessner, Albert

    2005-01-01

    An extensible Java(TradeMark) software framework supports the construction and operation of graphical user interfaces (GUIs) for distributed computing systems typified by ground control systems that send commands to, and receive telemetric data from, spacecraft. Heretofore, such GUIs have been custom built for each new system at considerable expense. In contrast, the present framework affords generic capabilities that can be shared by different distributed systems. Dynamic class loading, reflection, and other run-time capabilities of the Java language and JavaBeans component architecture enable the creation of a GUI for each new distributed computing system with a minimum of custom effort. By use of this framework, GUI components in control panels and menus can send commands to a particular distributed system with a minimum of system-specific code. The framework receives, decodes, processes, and displays telemetry data; custom telemetry data handling can be added for a particular system. The framework supports saving and later restoration of users configurations of control panels and telemetry displays with a minimum of effort in writing system-specific code. GUIs constructed within this framework can be deployed in any operating system with a Java run-time environment, without recompilation or code changes.

  9. Compactly Supported Curvelet-Type Systems

    DEFF Research Database (Denmark)

    Rasmussen, Kenneth Niemann; Nielsen, Morten

    2012-01-01

    We study a flexible method for constructing curvelet-type frames. These curvelet-type systems have the same sparse representation properties as curvelets for appropriate classes of smooth functions, and the flexibility of the method allows us to give a constructive description of how to construct...... curvelet-type systems with a prescribed nature such as compact support in direct space. The method consists of using the machinery of almost diagonal matrices to show that a system of curvelet molecules which is sufficiently close to curvelets constitutes a frame for curvelet-type spaces. Such a system...

  10. Selective enantioseparation of levocetirizine via a hollow fiber supported liquid membrane and mass transfer prediction

    International Nuclear Information System (INIS)

    Sunsandee, Niti; Leepipatpiboon, Natchanun; Ramakul, Prakorn

    2013-01-01

    The enantioselective separation of levocetirizine via a hollow fiber supported liquid membrane was examined. O,O'-dibenzoyl-(2R,3R)-tartaric acid ((-)-DBTA) diluted in 1-decanol was used as a chiral selector extractant. The influence of concentrations of feed and stripping phases, and extractant concentration in the membrane phase, was also investigated. A mathematical model focusing on the extraction side of the liquid membrane system was presented to predict the concentration of levocetirizine at different times. The extraction and recovery of levocetirizine from feed phase were 75.00% and 72.00%, respectively. The mass transfer coefficients at aqueous feed boundary layer (k_f) and the organic liquid membrane phase (k_m) were calculated as 2.41x10"2 and 1.89x10"2 cm/s, respectively. The validity of the developed model was evaluated through a comparison with experimental data, and good agreement was obtained

  11. Selective enantioseparation of levocetirizine via a hollow fiber supported liquid membrane and mass transfer prediction

    Energy Technology Data Exchange (ETDEWEB)

    Sunsandee, Niti [Government Pharmaceutical Organization, Bangkok (Thailand); Leepipatpiboon, Natchanun [Chulalongkorn University, Bangkok (Thailand); Ramakul, Prakorn [Silpakorn University, Nakhon Pathom (Thailand)

    2013-06-15

    The enantioselective separation of levocetirizine via a hollow fiber supported liquid membrane was examined. O,O'-dibenzoyl-(2R,3R)-tartaric acid ((-)-DBTA) diluted in 1-decanol was used as a chiral selector extractant. The influence of concentrations of feed and stripping phases, and extractant concentration in the membrane phase, was also investigated. A mathematical model focusing on the extraction side of the liquid membrane system was presented to predict the concentration of levocetirizine at different times. The extraction and recovery of levocetirizine from feed phase were 75.00% and 72.00%, respectively. The mass transfer coefficients at aqueous feed boundary layer (k{sub f}) and the organic liquid membrane phase (k{sub m}) were calculated as 2.41x10{sup 2} and 1.89x10{sup 2} cm/s, respectively. The validity of the developed model was evaluated through a comparison with experimental data, and good agreement was obtained.

  12. Decision Support System for Fighter Pilots

    DEFF Research Database (Denmark)

    Randleff, Lars Rosenberg

    2007-01-01

    During a mission over enemy territory a fighter aircraft may be engaged by ground based threats. The pilot can use different measures to avoid the aircraft from being detected by e.g. enemy radar systems. If the enemy detects the aircraft a missile may be fired to seek and destroy the aircraft...... and countermeasures that can be applied to mitigate threats. This work is concerned with finding proper evasive actions when a fighter aircraft is engaged by ground based threats. To help the pilot in deciding on these actions a decision support system may be implemented. The environment in which such a system must....... When new threats occur the decision support system must be able to provide suggestions within a fraction of a second. Since the time it takes to find an optimal solution to the mathematical model can not comply with this requirement solutions are sought using a metaheuristic....

  13. Decision support system for surface irrigation design

    OpenAIRE

    Gonçalves, José M.; Pereira, L.S.

    2009-01-01

    The SADREG decision support system was developed to help decision makers in the process of design and selection of farm surface irrigation systems to respond to requirements of modernization of surface irrigation—furrow, basin, and border irrigation. It includes a database, simulation models, user-friendly interfaces, and multicriteria analysis models. SADREG is comprised of two components: design and selection. The first component applies database information, and through several si...

  14. A decision support system for forensic entomology

    OpenAIRE

    Morvan , Gildas; Jolly , Daniel; Dupont , Daniel; Kubiak , Philippe

    2007-01-01

    International audience; This paper presents a multiagent-based model of insect development on a dead body and a three layers Decision Support System architecture able to perform retrodictive (abductive) reasoning from multiagent-based models or more generally, complex systems models. This architecture is used in order to compute post-mortem intervals from entomological data sampled on cadavers. Knowing the exact time of a death is fundamental in criminal investigations. Thus, it is necessary ...

  15. Intelligent tactical asset allocation support system

    OpenAIRE

    Hiemstra, Y.

    1995-01-01

    This paper presents an advanced support system for Tactical Asset Allocation. Asset allocation explains over 90% of portfolio performance (Brinson, Hood and Beebower, 1988). Tactical asset allocation adjusts a strategic portfolio on the basis of short term market outlooks. The system includes aprediction model that forecasts quarterly excess returns on the S and PSOO, an optimization model that adjusts a user-specified strategic portfolio on thebasis of the excess return forecast, and a compo...

  16. Life Support Systems: Wastewater Processing and Water Management

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Exploration Systems (AES) Life Support Systems project Wastewater Processing and Water Management task: Within an integrated life support system, water...

  17. Requirements by the operator of supporting systems

    International Nuclear Information System (INIS)

    Grimm, E.; Lot, L.

    1996-01-01

    Requirements by the nuclear power station operator on computer support orient themselves to the various operating situations which can arise in the plant. Event-oriented or system-oriented methods of handling determine the type of support by the computer. Pure plant information in situations with few events, an intelligent alarm system in situations with many events and a guide by means of pre-prepared procedures are an aspect of the operator requirements of computer solutions. These are the themes dealt with in this paper. A further theme is the support of the operator by the ergonomics of the control room in the areas of working place, lighting, air conditioning and acoustics. (author) 4 figs

  18. Operator decision support system for sodium loop

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kwang Hyeang; Park, Kyu Ho; Kim, Tak Kon; Jo, Choong Ho; Seong, Kyeong A; Lee, Keon Myeong; Kim, Yeong Dal; Kim, Chang Beom; Kim, Jong Kyu; Jo, Hee Chang; Lee, Ji Hyeong; Jeong, Yoon Soo; Chio, Jong Hyeong; Jeong, Bong Joon; Hong, Joon Seong; Kim, Bong Wan; Seong, Byeong Hak [Korea Advanced Institute Science and Technology, Taejon (Korea, Republic of)

    1994-07-01

    The objective of this study is to develop an operator decision support system by computerizing the sodium circuit. This study developed graphical display interface for the control panel which provides the safety control of equipment, the recognition of experimental process states and sodium circuit states. In this study, basic work to develop an operator decision support real-time expert system for sodium loop was carried out. Simplification of control commands and effective operation of various real-time data and signals by equipment code standardization are studied. The cost ineffectiveness of the single processor structure provides the ground for the development of cost effective parallel processing system. The important tasks of this study are (1) design and implementation of control state surveillance panel of sodium loop, (2) requirement analysis of operator support real-time expert system for sodium loop, (3) design of standard code rule for operating equipment and research on the cost effective all purpose parallel processing system and (4) requirement analysis of expert system and design of control state variables and user interface for experimental process. 10 refs., 36 figs., 20 tabs.

  19. Development of an ecological decision support system

    NARCIS (Netherlands)

    van Beusekom, Frits; Brazier, Frances; Schipper, Piet; Treur, Jan; del Pobil, A.P.

    1998-01-01

    In this paper a knowledge-based decision support system is described that determines the abiotic (chemical and physical) characteristics of a site on the basis of in-homogeneous samples of plant species. Techniques from the area of non-monotonic reasoning are applied to model multi-interpretable

  20. Support system of electronic health cards

    Directory of Open Access Journals (Sweden)

    Yu. L. Nechiporenko

    2013-02-01

    Full Text Available Made the survey online sources regarding the specification of functions of systems support electronic medical records. Given the tendency to attract mobile devices to conduct an array of medical data expedient development of EHR, which can be installed on a personal mobile device.

  1. Remote mobile communication in safety support system

    International Nuclear Information System (INIS)

    Inagaki, Kanji; Kobayashi, Hiroyuki; Hatanaka, Takahiro; Sakuma, Akira; Fukumoto, Akira; Ikeda, Jun

    1999-01-01

    Safety Support System (SSS) is a computerized operator support system for nuclear power plants, which is now under development. The concept of SSS covers 1) earlier detection of failure symptom and prediction of its influence to the plant operation, 2) improved transparency and robustness of plant control systems, 3) advanced human-machine interface and communication. The authors have been working on the third concept and proposed a remote mobile communication system called Plant Communication System (PCS). PCS aims to realize convenient communication between main control room and other areas such as plant local areas and site offices, using Personal Handyphone System (PHS) and wireless LAN (Local Area Network). PCS can transmit not only data but also graphic displays and dynamic video displays between the main control room and plant local areas. MPEG4 (Moving Picture Experts Group 4) technology is utilized in video data compression and decompression. The authors have developed the special multiplexing unit that connects PHS Cell Stations (CSs) and exiting coaxial cables. Voice recognition and announcement capability is also realized in the system, which enables verbal retrieval of information in the computer systems in the main control room from local areas. (author)

  2. Operator support system using computational intelligence techniques

    Energy Technology Data Exchange (ETDEWEB)

    Bueno, Elaine Inacio, E-mail: ebueno@ifsp.edu.br [Instituto Federal de Educacao, Ciencia e Tecnologia de Sao Paulo (IFSP), Sao Paulo, SP (Brazil); Pereira, Iraci Martinez, E-mail: martinez@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    Computational Intelligence Systems have been widely applied in Monitoring and Fault Detection Systems in several processes and in different kinds of applications. These systems use interdependent components ordered in modules. It is a typical behavior of such systems to ensure early detection and diagnosis of faults. Monitoring and Fault Detection Techniques can be divided into two categories: estimative and pattern recognition methods. The estimative methods use a mathematical model, which describes the process behavior. The pattern recognition methods use a database to describe the process. In this work, an operator support system using Computational Intelligence Techniques was developed. This system will show the information obtained by different CI techniques in order to help operators to take decision in real time and guide them in the fault diagnosis before the normal alarm limits are reached. (author)

  3. Operator support system using computational intelligence techniques

    International Nuclear Information System (INIS)

    Bueno, Elaine Inacio; Pereira, Iraci Martinez

    2015-01-01

    Computational Intelligence Systems have been widely applied in Monitoring and Fault Detection Systems in several processes and in different kinds of applications. These systems use interdependent components ordered in modules. It is a typical behavior of such systems to ensure early detection and diagnosis of faults. Monitoring and Fault Detection Techniques can be divided into two categories: estimative and pattern recognition methods. The estimative methods use a mathematical model, which describes the process behavior. The pattern recognition methods use a database to describe the process. In this work, an operator support system using Computational Intelligence Techniques was developed. This system will show the information obtained by different CI techniques in order to help operators to take decision in real time and guide them in the fault diagnosis before the normal alarm limits are reached. (author)

  4. Cloud Computing Application on Transport Dispatching Informational Support Systems

    Directory of Open Access Journals (Sweden)

    Dmitry Olegovich Gusenitsa

    2015-05-01

    Full Text Available Transport dispatching informational support systems has received widespread attention due to high quality information density, strong coherence and applicable visualization features. Nevertheless, because of large volume of data, complex integration requirements and the need for information exchange between different users, time costs of the development and implementation of the informational support systems, problems associated with various data formats compatibility, security protocols and high maintenance cost, the opportunities for the application of such systems are significantly reduced. This article reviews the possibility of creating a cloud storage data system for transport dispatching informational support system (TDIS using modern computer technology to meet the challenges of mass data processing, information security and reduce operational costs. The system is expected to make full use of the advantages offered by the technology of cloud storage. Integrated cloud will increase the amount of data available to the system, reduce the speed processing requirements and reduce the overall cost of system implementation. Creation and integration of cloud storage is one of the most important areas of TDIS development, which is stimulating and promoting the further development of TDIS to ensure the requirements of its users.

  5. Development of JRR-4 operation support system

    International Nuclear Information System (INIS)

    Takahashi, Hiroki; Yamamoto, Kazuyoshi; Yoritsune, Tsutomu; Arai, Nobuyoshi; Birumachi, Takashi

    1999-03-01

    The Japan Research Reactor No.4 (JRR-4) is a light water moderated and cooled, graphite reflected, pool-type reactor with the thermal output of 3500 kW. In February 1996, a work on core modification from high-enriched fuels to low-enriched ones was started and the work on modification was completed in May 1998. As a part of the work, Operation Support System (OSS) was adopted for the purpose of reducing load of operator, preventing operator's error and supplying operation data to users. In this paper, JRR-4 Operation Support System's configuration, characteristics and development process are described. OSS consists mainly of a workstation (WS), μXL and Personal Computer (PC). WS is used for collection of operation data. μXL is used for cooling system control and PC is used for operators' support. All of the program applications used in WS, μXL and PC are designed to make sure of high flexibility for the demands on modification from operators and new operation modes. The result of adopting this system, the consolidation monitoring, automation of part of reactor operation and data management were realized. In addition, the cooling control system was compacted. (author)

  6. Development of decommissioning engineering support system for fugen. Development of support system during actual dismantlement works

    International Nuclear Information System (INIS)

    Masanori Izumi; Yukihiro Iguchi; Yoshiki Kannehira

    2005-01-01

    The Advanced Thermal Reactor, Fugen Nuclear Power Station was permanently shut down in March 2003, and is now preparing for decommissioning. We have been developing Decommissioning Engineering Support System (DEXUS) aimed at planning optimal dismantlement process and carrying out dismantlement work safely and precisely. DEXUS consists of 'decommissioning planning support system' and 'dismantling support system'. The dismantling support system is developed aiming at using during actual dismantling work. It consists of three subsystems such as 'Worksite Visualization System', 'Dismantling Data Collection System' and 'Generated Waste Management System'. 'Worksite Visualization System' is a support system designed to provide the necessary information to workers during actual dismantlement works. And this system adopts AR (Augmented Reality) technology, overlapping calculation information into real world. 'Dismantling Data Collection System' is to collect necessary data for improving accuracy of decommissioning planning by evaluating work content and worker equipage, work time for dismantlement works. 'Generated Waste Management system' is a system recording necessary information by attaching the barcode to dismantled wastes or the containers. We can get the information of generated waste by recording generation place, generated time, treatment method and the contents. These subsystems enable to carry out reasonable and safe decommissioning of Fugen. In addition, we expect that those systems will be used for decommissioning of other nuclear facilities in the future. (authors)

  7. Knowledge representation for decision support systems

    International Nuclear Information System (INIS)

    Methlie, L.B.

    1985-01-01

    This book is organized into three sections in accordance with the structure of the conference program. First section contains four major papers which were commissioned by the Programme Committee to set the tone for the conference and to provide a structured source of relevant material from contributing disciplines. The second section contains specific papers submitted to the conference, and concerned with the following topics of specific interest: epistemological issues for decision support systems (DSS), capturing organizational knowledge for DSS, complementarity between human and formal DSS, and representations for adaption. The third section contains the short papers on any topic of relevance to the theme of the conference. It is hoped that the two working conferences organized by WG 8.3 will contribute to the development of a coherent knowledge and understanding of the class of computerized information systems called Decision Support Systems. (Auth.)

  8. BASIC STUDY ON TAILORMADE BRAKING SUPPORT SYSTEM

    Directory of Open Access Journals (Sweden)

    Toshiya HIROSE, M.S.

    2004-01-01

    This research reviewed the construction of models of a Tailormade Braking Support System (TBSS for braking to stop vehicles and the evaluation of drivers. As a result, the following conclusions were drawn. (1 Braking factors were found to change in the period from the start of braking to stopping; (2 Changes in braking factors can be logically incorporated into the control elements of braking support system; (3 Readymade Driver Model is effective as a model to be incorporated into the base system of TBSS; (4 Tailormade Driver Model built on Neural Network is effective as a main model to construct TBSS; (5 As for TBSS, both subjective and objective ratings on the timing and magnitude of braking are favorable, and its safety and sense of security are improved.

  9. Using Visualization in Cockpit Decision Support Systems

    Science.gov (United States)

    Aragon, Cecilia R.

    2005-01-01

    In order to safely operate their aircraft, pilots must make rapid decisions based on integrating and processing large amounts of heterogeneous information. Visual displays are often the most efficient method of presenting safety-critical data to pilots in real time. However, care must be taken to ensure the pilot is provided with the appropriate amount of information to make effective decisions and not become cognitively overloaded. The results of two usability studies of a prototype airflow hazard visualization cockpit decision support system are summarized. The studies demonstrate that such a system significantly improves the performance of helicopter pilots landing under turbulent conditions. Based on these results, design principles and implications for cockpit decision support systems using visualization are presented.

  10. Implementation of Business Game Activity Support System

    Institute of Scientific and Technical Information of China (English)

    TANABU Motonari

    2004-01-01

    Business game can be used not only as an educational tool for the development of decision making ability, but also can be used for supporting the knowledge creation activity in organizations. In this paper, some conceptual considerations to meanings of the business game in the knowledge creation activity by using the knowledge creation theory and other related theories are given,and business game activity concept which refers to game play and development is proposed. Then focusing on the business game activity as an instantiation of the knowledge creation activity, and a Web based gaming activity support system based on the former system called YBG that enables us to play and develop many business games through the standard web browser is proposed. This system also provides us a lot of opportunities to play and develop the business games over business game communities.

  11. Impulse: Memory System Support for Scientific Applications

    Directory of Open Access Journals (Sweden)

    John B. Carter

    1999-01-01

    Full Text Available Impulse is a new memory system architecture that adds two important features to a traditional memory controller. First, Impulse supports application‐specific optimizations through configurable physical address remapping. By remapping physical addresses, applications control how their data is accessed and cached, improving their cache and bus utilization. Second, Impulse supports prefetching at the memory controller, which can hide much of the latency of DRAM accesses. Because it requires no modification to processor, cache, or bus designs, Impulse can be adopted in conventional systems. In this paper we describe the design of the Impulse architecture, and show how an Impulse memory system can improve the performance of memory‐bound scientific applications. For instance, Impulse decreases the running time of the NAS conjugate gradient benchmark by 67%. We expect that Impulse will also benefit regularly strided, memory‐bound applications of commercial importance, such as database and multimedia programs.

  12. Supporting multiple control systems at Fermilab

    Energy Technology Data Exchange (ETDEWEB)

    Nicklaus, Dennis J.; /Fermilab

    2009-10-01

    The Fermilab control system, ACNET, is used for controlling the Tevatron and all of its pre-accelerators. However, other smaller experiments at Fermilab have been using different controls systems, in particular DOOCS and EPICS. This paper reports some of the steps taken at Fermilab to integrate support for these outside systems. We will describe specific tools that we have built or adapted to facilitate interaction between the architectures. We also examine some of the difficulties that arise from managing this heterogeneous environment. Incompatibilities as well as common elements will be described.

  13. Design of JRR-4 operation Supporting System

    International Nuclear Information System (INIS)

    Takahashi, Hiroki; Arai, Nobuyoshi; Yamamoto, Kazuyoshi; Yoritsune, Tsutomu

    1999-01-01

    A work on the Japan Research Reactor No. 4 (JRR-4) core modification from high-enriched fuels to low-enriched ones was started in 1996 and completed in May 1998. As a part of the work, Operation Supporting System (OSS) was adopted for the purpose of reducing load of operator, preventing operator's error and supplying operation data to users. As the result of adopting this system, integrated monitoring, automation of part of reactor operation and data management were realized. In addition, the cooling control system was compacted. (author)

  14. Web-Based Learning Support System

    Science.gov (United States)

    Fan, Lisa

    Web-based learning support system offers many benefits over traditional learning environments and has become very popular. The Web is a powerful environment for distributing information and delivering knowledge to an increasingly wide and diverse audience. Typical Web-based learning environments, such as Web-CT, Blackboard, include course content delivery tools, quiz modules, grade reporting systems, assignment submission components, etc. They are powerful integrated learning management systems (LMS) that support a number of activities performed by teachers and students during the learning process [1]. However, students who study a course on the Internet tend to be more heterogeneously distributed than those found in a traditional classroom situation. In order to achieve optimal efficiency in a learning process, an individual learner needs his or her own personalized assistance. For a web-based open and dynamic learning environment, personalized support for learners becomes more important. This chapter demonstrates how to realize personalized learning support in dynamic and heterogeneous learning environments by utilizing Adaptive Web technologies. It focuses on course personalization in terms of contents and teaching materials that is according to each student's needs and capabilities. An example of using Rough Set to analyze student personal information to assist students with effective learning and predict student performance is presented.

  15. Consultation system for image diagnosis: Report formation support system

    International Nuclear Information System (INIS)

    Ikeda, M.; Sakuma, S.; Ishigaki, T.; Suzuki, K.; Oikawa, K.

    1987-01-01

    The authors developed a consultation system for image diagnosis, involving artificial intelligence ideas. In this system, the authors proposed a new report formation support system and implemented it in lymphangiography. This support system starts with the input of image interpretation. The input process is made mainly by selecting items. This system encodes the input findings into the semantic network, which is represented as a directed graph, and it reserves them into the knowledge database in the above structure. Finally, the output (report) is made in the near natural language, which corresponds to the input findings

  16. Decommissioning support system, using RFID and USN

    Energy Technology Data Exchange (ETDEWEB)

    Cho, W. H.; Park, S. K.; Choi, Y. D.; Lee, K. I.; Moon, J. K. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2012-05-15

    RFID and USN are key technology in the ubiquitous computing systems. Actual physical environmental information can be used to remote control systems and management using various sensor technology and wireless network. These are used to managing physical distribution systems, complex monitoring environments such as fire detecting and various environments in the field of u-healthcare. Recently, decontamination and dismantling for nuclear plant have increasing interest after Fucushima nuclear accident. In this paper, a decommissioning support system is suggested for an effective management and control of work efficiency and of worker's status. This system makes effective real-time monitoring worker's location, work status and radiation exposure and effective response for worker's safety and emergency situation

  17. Decommissioning support system, using RFID and USN

    International Nuclear Information System (INIS)

    Cho, W. H.; Park, S. K.; Choi, Y. D.; Lee, K. I.; Moon, J. K.

    2012-01-01

    RFID and USN are key technology in the ubiquitous computing systems. Actual physical environmental information can be used to remote control systems and management using various sensor technology and wireless network. These are used to managing physical distribution systems, complex monitoring environments such as fire detecting and various environments in the field of u-healthcare. Recently, decontamination and dismantling for nuclear plant have increasing interest after Fucushima nuclear accident. In this paper, a decommissioning support system is suggested for an effective management and control of work efficiency and of worker's status. This system makes effective real-time monitoring worker's location, work status and radiation exposure and effective response for worker's safety and emergency situation

  18. Effects of supporting structures on dynamic response of nuclear power plant equipment and piping systems

    International Nuclear Information System (INIS)

    Stoykovich, M.

    1982-01-01

    This paper presents the evaluation of the effects of supporting structures in dynamic analysis of equipment or piping systems, which involves formulations for determining reduced stiffness and mass matrices associated with the number of degrees of freedom corresponding to the support nodal points of a finite element model. Also, evaluation of a composite damping matrix associated with different damping properties of supporting structures, equipment, and piping systems is considered. Determination of spring constants, effective masses and mass moments of inertia, and damping values as fractions of critical damping on the basis of the theory of rigid bases on the surfaces of an elastic halfspace is demonstrated

  19. Modem: data exchange among decision support systems

    International Nuclear Information System (INIS)

    Baig, S.; Zaehringer, M.

    2003-01-01

    The aim of the European Research and Development project MODEM (Monitoring Data and Information Exchange Among Decision Support Systems) is to achieve practical improvements for data exchange among decision support systems (DSS). Hence, the results of model calculations become comparable. This is a precondition for harmonised decision making. Based on the analysis of existing procedures, it was decided to use the PUSH-PULL concept. Notifications are actively and automatically sent by the DSS (PUSH). The data can then be downloaded form an in-formation server (PULL). The format of the data is defined in XML (extended markup language). Participants of the project are the DSS: RODOS, ARGOS and RECASS. First, the data is comprised of the source term and meteorological information. Results of the prognoses and measurement data are also to be exchanged. Exercises testing and improving the pro-cedures form an integral part of the project. (orig.)

  20. Modeling a support system for the evaluator

    International Nuclear Information System (INIS)

    Lozano Lima, B.; Ilizastegui Perez, F; Barnet Izquierdo, B.

    1998-01-01

    This work gives evaluators a tool they can employ to give more soundness to their review of operational limits and conditions. The system will establish the most adequate method to carry out the evaluation, as well as to evaluate the basis for technical operational specifications. It also includes the attainment of alternative questions to be supplied to the operating entity to support it in decision-making activities

  1. IFSS: The IAEA's inspection field support system

    International Nuclear Information System (INIS)

    Muller, R.; Heinonen, O.J.; Schriefer, D.

    1990-01-01

    Recently, highly automated nuclear facilities with enormous volumes of nuclear material accounting data have come into operation. A few others will become operational shortly. Analysis and verification of the data for safeguards purposes is manageable only with improved computer support in the field. To assist its safeguards inspectors, the IAEA has developed the Inspection Field Support System (IFSS). It allows safeguards inspectors to collect, maintain, analyse, and evaluate inspection data on site at nuclear facilities. Previously, field computer support to safeguards inspectors concentrated on providing measurement instrumentation with data storage, but data analysis capabilities were elementary. Also, generic statistical tools were available to handle data that inspectors could (usually manually) input into a computer. Electronic links between these two directions were rudimentary. IFSS integrates the data required for verification and accounting so that inspectors will be able to devote more time to measurements and to derive conclusions at the site in a more timely manner. The system operates on stationary personal computers as well as on portable ones. Its introduction reflects the IAEA Department of Safeguards determination to further improve operational efficiency. It should be emphasized that IFSS implementation is still under development. Several field installations have been made to obtain practical experience and to determine the system's effectiveness

  2. A COMPUTERIZED OPERATOR SUPPORT SYSTEM PROTOTYPE

    Energy Technology Data Exchange (ETDEWEB)

    Thomas A. Ulrich; Roger Lew; Ronald L. Boring; Ken Thomas

    2015-03-01

    A computerized operator support system (COSS) is proposed for use in nuclear power plants to assist control room operators in addressing time-critical plant upsets. A COSS is a collection of technologies to assist operators in monitoring overall plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. A prototype COSS was developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based on four underlying elements consisting of a digital alarm system, computer-based procedures, piping and instrumentation diagram system representations, and a recommender module for mitigation actions. The initial version of the prototype is now operational at the Idaho National Laboratory using the Human System Simulation Laboratory.

  3. Supplemental protein in support of muscle mass and health: advantage whey.

    Science.gov (United States)

    Devries, Michaela C; Phillips, Stuart M

    2015-03-01

    Skeletal muscle is an integral body tissue playing key roles in strength, performance, physical function, and metabolic regulation. It is essential for athletes to ensure that they have optimal amounts of muscle mass to ensure peak performance in their given sport. However, the role of maintaining muscle mass during weight loss and as we age is an emerging concept, having implications in chronic disease prevention, functional capacity, and quality of life. Higher-protein diets have been shown to: (1) promote gains in muscle mass, especially when paired with resistance training; (2) spare muscle mass loss during caloric restriction; and (3) attenuate the natural loss of muscle mass that accompanies aging. Protein quality is important to the gain and maintenance of muscle mass. Protein quality is a function of protein digestibility, amino acid content, and the resulting amino acid availability to support metabolic function. Whey protein is one of the highest-quality proteins given its amino acid content (high essential, branched-chain, and leucine amino acid content) and rapid digestibility. Consumption of whey protein has a robust ability to stimulate muscle protein synthesis. In fact, whey protein has been found to stimulate muscle protein synthesis to a greater degree than other proteins such as casein and soy. This review examines the existing data supporting the role for protein consumption, with an emphasis on whey protein, in the regulation of muscle mass and body composition in response to resistance training, caloric restriction, and aging. © 2015 Institute of Food Technologists®

  4. Post Disaster Assessment with Decision Support System

    Directory of Open Access Journals (Sweden)

    May Florence J. Franco

    2016-05-01

    Full Text Available The study aimed to develop an online system that would expedite the response of agencies after disaster strikes; generate a list of the kinds and volume of relief aids needed per family affected for a fair, precise and timely distribution; implement community-based ICT by remotely gathering all the necessary data needed for disaster assessment; and adhere to ISO 9126 standards. The system was designed to calculate the effects of disaster in human lives and economy. Integrated into the system were Goggle Maps, Mines and GeoSciences Bureau Hazard Maps, SMS sending features, best passable routes calculations, and decision support on the needs that has to be addressed. The system was made live at pdrrmcguimaras.herokuapp.com to allow remote data entry. The functionality and usability of the system were evaluated by 19 potential users by computing for the arithmetic Mean and Standard Deviation of the survey. The result showed that most of them strongly agreed that the system is acceptable based on these criteria. A group of IT experts also evaluated the system’s conformance to ISO 9126 standards using the same method. The result showed that majority of them strongly agreed that the system conforms to this international standard. The system is seen as a valuable tool for the Provincial Disaster Risk Reduction Management Council (PDRRMC and the National Disaster Risk Reduction Management Council (NDRRMC for it could help expedite the assessment of the effects of disasters and the formulation of response plans and strategies.

  5. Advanced Technologies to Improve Closure of Life Support Systems

    Science.gov (United States)

    Barta, Daniel J.

    2016-01-01

    As NASA looks beyond the International Space Station toward long-duration, deep space missions away from Earth, the current practice of supplying consumables and spares will not be practical nor affordable. New approaches are sought for life support and habitation systems that will reduce dependency on Earth and increase mission sustainability. To reduce launch mass, further closure of Environmental Control and Life Support Systems (ECLSS) beyond the current capability of the ISS will be required. Areas of particular interest include achieving higher degrees of recycling within Atmosphere Revitalization, Water Recovery and Waste Management Systems. NASA is currently investigating advanced carbon dioxide reduction processes that surpass the level of oxygen recovery available from the Sabatier Carbon Dioxide Reduction Assembly (CRA) on the ISS. Candidate technologies will potentially improve the recovery of oxygen from about 50% (for the CRA) to as much as 100% for technologies who's end product is solid carbon. Improving the efficiency of water recycling and recovery can be achieved by the addition of advanced technologies to recover water from brines and solid wastes. Bioregenerative technologies may be utilized for water reclaimation and also for the production of food. Use of higher plants will simultaneously benefit atmosphere revitalization and water recovery through photosynthesis and transpiration. The level at which bioregenerative technologies are utilized will depend on their comparative requirements for spacecraft resources including mass, power, volume, heat rejection, crew time and reliability. Planetary protection requirements will need to be considered for missions to other solar system bodies.

  6. Automatic seismic support design of piping system by an object oriented expert system

    International Nuclear Information System (INIS)

    Nakatogawa, T.; Takayama, Y.; Hayashi, Y.; Fukuda, T.; Yamamoto, Y.; Haruna, T.

    1990-01-01

    The seismic support design of piping systems of nuclear power plants requires many experienced engineers and plenty of man-hours, because the seismic design conditions are very severe, the bulk volume of the piping systems is hyge and the design procedures are very complicated. Therefore we have developed a piping seismic design expert system, which utilizes the piping design data base of a 3 dimensional CAD system and automatically determines the piping support locations and support styles. The data base of this system contains the maximum allowable seismic support span lengths for straight piping and the span length reduction factors for bends, branches, concentrated masses in the piping, and so forth. The system automatically produces the support design according to the design knowledge extracted and collected from expert design engineers, and using design information such as piping specifications which give diameters and thickness and piping geometric configurations. The automatic seismic support design provided by this expert system achieves in the reduction of design man-hours, improvement of design quality, verification of design result, optimization of support locations and prevention of input duplication. In the development of this system, we had to derive the design logic from expert design engineers and this could not be simply expressed descriptively. Also we had to make programs for different kinds of design knowledge. For these reasons we adopted the object oriented programming paradigm (Smalltalk-80) which is suitable for combining programs and carrying out the design work

  7. The embodiment design of the heat rejection system for the portable life support system

    Science.gov (United States)

    Stuckwisch, Sue; Francois, Jason; Laughlin, Julia; Phillips, Lee; Carrion, Carlos A.

    1994-01-01

    The Portable Life Support System (PLSS) provides a suitable environment for the astronaut in the Extravehicular Mobility Unit (EMU), and the heat rejection system controls the thermal conditions in the space suit. The current PLSS sublimates water to the space environment; therefore, the system loses mass. Since additional supplies of fluid must be available on the Space Shuttle, NASA desires a closed heat rejecting system. This document presents the embodiment design for a radiative plate heat rejection system without mass transfer to the space environment. This project will transform the concept variant into a design complete with material selection, dimensions of the system, layouts of the heat rejection system, suggestions for manufacturing, and financial viability.

  8. IGENPRO knowledge-based operator support system

    International Nuclear Information System (INIS)

    Morman, J. A.

    1998-01-01

    Research and development is being performed on the knowledge-based IGENPRO operator support package for plant transient diagnostics and management to provide operator assistance during off-normal plant transient conditions. A generic thermal-hydraulic (T-H) first-principles approach is being implemented using automated reasoning, artificial neural networks and fuzzy logic to produce a generic T-H system-independent/plant-independent package. The IGENPRO package has a modular structure composed of three modules: the transient trend analysis module PROTREN, the process diagnostics module PRODIAG and the process management module PROMANA. Cooperative research and development work has focused on the PRODIAG diagnostic module of the IGENPRO package and the operator training matrix of transients used at the Braidwood Pressurized Water Reactor station. Promising simulator testing results with PRODIAG have been obtained for the Braidwood Chemical and Volume Control System (CVCS), and the Component Cooling Water System. Initial CVCS test results have also been obtained for the PROTREN module. The PROMANA effort also involves the CVCS. Future work will be focused on the long-term, slow and mild degradation transients where diagnoses of incipient T-H component failure prior to forced outage events is required. This will enhance the capability of the IGENPRO system as a predictive maintenance tool for plant staff and operator support

  9. Hail Disrometer Array for Launch Systems Support

    Science.gov (United States)

    Lane, John E.; Sharp, David W.; Kasparis, Takis C.; Doesken, Nolan J.

    2008-01-01

    Prior to launch, the space shuttle might be described as a very large thermos bottle containing substantial quantities of cryogenic fuels. Because thermal insulation is a critical design requirement, the external wall of the launch vehicle fuel tank is covered with an insulating foam layer. This foam is fragile and can be damaged by very minor impacts, such as that from small- to medium-size hail, which may go unnoticed. In May 1999, hail damage to the top of the External Tank (ET) of STS-96 required a rollback from the launch pad to the Vehicle Assembly Building (VAB) for repair of the insulating foam. Because of the potential for hail damage to the ET while exposed to the weather, a vigilant hail sentry system using impact transducers was developed as a hail damage warning system and to record and quantify hail events. The Kennedy Space Center (KSC) Hail Monitor System, a joint effort of the NASA and University Affiliated Spaceport Technology Development Contract (USTDC) Physics Labs, was first deployed for operational testing in the fall of 2006. Volunteers from the Community Collaborative Rain. Hail, and Snow Network (CoCoRaHS) in conjunction with Colorado State University were and continue to be active in testing duplicate hail monitor systems at sites in the hail prone high plains of Colorado. The KSC Hail Monitor System (HMS), consisting of three stations positioned approximately 500 ft from the launch pad and forming an approximate equilateral triangle (see Figure 1), was deployed to Pad 39B for support of STS-115. Two months later, the HMS was deployed to Pad 39A for support of STS-116. During support of STS-117 in late February 2007, an unusual hail event occurred in the immediate vicinity of the exposed space shuttle and launch pad. Hail data of this event was collected by the HMS and analyzed. Support of STS-118 revealed another important application of the hail monitor system. Ground Instrumentation personnel check the hail monitors daily when a

  10. Developing and Organizing a Trauma System and Mass Casualty ...

    African Journals Online (AJOL)

    An effective trauma system may potentially manage mass casualty incidence ... Israel has a unique trauma system of organizing and managing an emergency event, ... Wisdom, motivation and pragmatism of the Israeli model may be useful to ...

  11. Modeling snail breeding in Bioregenerative Life Support System

    Science.gov (United States)

    Kovalev, Vladimir; Tikhomirov, Alexander A.; Nickolay Manukovsky, D..

    It is known that snail meat is a high quality food that is rich in protein. Hence, heliciculture or land snail farming spreads worldwide because it is a profitable business. The possibility to use the snails of Helix pomatia in Biological Life Support System (BLSS) was studied by Japanese Researches. In that study land snails were considered to be producers of animal protein. Also, snail breeding was an important part of waste processing, because snails were capable to eat the inedible plant biomass. As opposed to the agricultural snail farming, heliciculture in BLSS should be more carefully planned. The purpose of our work was to develop a model for snail breeding in BLSS that can predict mass flow rates in and out of snail facility. There are three linked parts in the model called “Stoichiometry”, “Population” and “Mass balance”, which are used in turn. Snail population is divided into 12 age groups from oviposition to one year. In the submodel “Stoichiometry” the individual snail growth and metabolism in each of 12 age groups are described with stoichiometry equations. Reactants are written on the left side of the equations, while products are written on the right side. Stoichiometry formulas of reactants and products consist of four chemical elements: C, H, O, N. The reactants are feed and oxygen, products are carbon dioxide, metabolic water, snail meat, shell, feces, slime and eggs. If formulas of substances in the stoichiometry equations are substituted with their molar masses, then stoichiometry equations are transformed to the equations of molar mass balance. To get the real mass balance of individual snail growth and metabolism one should multiply the value of each molar mass in the equations on the scale parameter, which is the ratio between mass of monthly consumed feed and molar mass of feed. Mass of monthly consumed feed and stoichiometry coefficients of formulas of meat, shell, feces, slime and eggs should be determined experimentally

  12. Reactive Software Agent Anesthesia Decision Support System

    Directory of Open Access Journals (Sweden)

    Grant H. Kruger

    2011-12-01

    Full Text Available Information overload of the anesthesiologist through technological advances have threatened the safety of patients under anesthesia in the operating room (OR. Traditional monitoring and alarm systems provide independent, spatially distributed indices of patient physiological state. This creates the potential to distract caregivers from direct patient care tasks. To address this situation, a novel reactive agent decision support system with graphical human machine interface was developed. The system integrates the disparate data sources available in the operating room, passes the data though a decision matrix comprising a deterministic physiologic rule base established through medical research. Patient care is improved by effecting change to the care environment by displaying risk factors and alerts as an intuitive color coded animation. The system presents a unified, contextually appropriate snapshot of the patient state including current and potential risk factors, and alerts of critical patient events to the operating room team without requiring any user intervention. To validate the efficacy of the system, a retrospective analysis focusing on the hypotension rules were performed. Results show that even with vigilant and highly trained clinicians, deviations from ideal patient care exist and it is here that the proposed system may allow more standardized and improved patient care and potentially outcomes.

  13. Low temperature growth of ultra-high mass density carbon nanotube forests on conductive supports

    International Nuclear Information System (INIS)

    Sugime, Hisashi; Esconjauregui, Santiago; Yang, Junwei; D'Arsié, Lorenzo; Robertson, John; Oliver, Rachel A.; Bhardwaj, Sunil; Cepek, Cinzia

    2013-01-01

    We grow ultra-high mass density carbon nanotube forests at 450 °C on Ti-coated Cu supports using Co-Mo co-catalyst. X-ray photoelectron spectroscopy shows Mo strongly interacts with Ti and Co, suppressing both aggregation and lifting off of Co particles and, thus, promoting the root growth mechanism. The forests average a height of 0.38 μm and a mass density of 1.6 g cm −3 . This mass density is the highest reported so far, even at higher temperatures or on insulators. The forests and Cu supports show ohmic conductivity (lowest resistance ∼22 kΩ), suggesting Co-Mo is useful for applications requiring forest growth on conductors

  14. Fusion-supported decentralized nuclear energy system

    International Nuclear Information System (INIS)

    Jassby, D.L.

    1979-04-01

    A decentralized nuclear energy system is proposed comprising mass-produced pressurized water reactors in the size range 10 to 300 MW (thermal), to be used for the production of process heat, space heat, and electricity in applications where petroleum and natural gas are presently used. Special attention is given to maximizing the refueling interval with no interim batch shuffling in order to minimize fuel transport, reactor downtime, and opportunity for fissile diversion. These objectives demand a substantial fissile enrichment (7 to 15%). The preferred fissile fuel is U-233, which offers an order of magnitude savings in ore requirements (compared with U-235 fuel), and whose higher conversion ratio in thermal reactors serves to extend the period of useful reactivity and relieve demand on the fissile breeding plants (compared with Pu-239 fuel). Application of the neutral-beam-driven tokamak fusion-neutron source to a U-233 breeding pilot plant is examined. This scheme can be extended in part to a decentralized fusion energy system, wherein remotely located large fusion reactors supply excess tritium to a distributed system of relatively small nonbreeding D-T reactors

  15. One-Dimensional Mass-Spring Chains Supporting Elastic Waves with Non-Conventional Topology

    Directory of Open Access Journals (Sweden)

    2016-04-01

    Full Text Available There are two classes of phononic structures that can support elastic waves with non-conventional topology, namely intrinsic and extrinsic systems. The non-conventional topology of elastic wave results from breaking time reversal symmetry (T-symmetry of wave propagation. In extrinsic systems, energy is injected into the phononic structure to break T-symmetry. In intrinsic systems symmetry is broken through the medium microstructure that may lead to internal resonances. Mass-spring composite structures are introduced as metaphors for more complex phononic crystals with non-conventional topology. The elastic wave equation of motion of an intrinsic phononic structure composed of two coupled one-dimensional (1D harmonic chains can be factored into a Dirac-like equation, leading to antisymmetric modes that have spinor character and therefore non-conventional topology in wave number space. The topology of the elastic waves can be further modified by subjecting phononic structures to externally-induced spatio-temporal modulation of their elastic properties. Such modulations can be actuated through photo-elastic effects, magneto-elastic effects, piezo-electric effects or external mechanical effects. We also uncover an analogy between a combined intrinsic-extrinsic systems composed of a simple one-dimensional harmonic chain coupled to a rigid substrate subjected to a spatio-temporal modulation of the side spring stiffness and the Dirac equation in the presence of an electromagnetic field. The modulation is shown to be able to tune the spinor part of the elastic wave function and therefore its topology. This analogy between classical mechanics and quantum phenomena offers new modalities for developing more complex functions of phononic crystals and acoustic metamaterials.

  16. System of Consciousness Contextual as Learning Support

    Directory of Open Access Journals (Sweden)

    Jorge Eliseo Gómez Gómez

    2016-08-01

    Full Text Available With the inclusion of ubiquitous computing in education, it is intended that the student is an active agent in its formation process and interacts with its context. This paper presents the design and implementation of architecture for ubiquitous learning environments in which they integrate physical spaces with applications which are then executed by users. The system supports objects augmented with RFID tags, NFC and QR Code. Each tag contains data that uniquely identifies the resource. To validate the proposed architecture is developed experimentally tested a prototype at the end of it is done to verify that the proposed architecture improves the academic performance of students.

  17. MEASURING THE MASS OF SOLAR SYSTEM PLANETS USING PULSAR TIMING

    International Nuclear Information System (INIS)

    Champion, D. J.; Hobbs, G. B.; Manchester, R. N.; Edwards, R. T.; Burke-Spolaor, S.; Sarkissian, J. M.; Backer, D. C.; Bailes, M.; Bhat, N. D. R.; Van Straten, W.; Coles, W.; Demorest, P. B.; Ferdman, R. D.; Purver, M. B.; Folkner, W. M.; Hotan, A. W.; Kramer, M.; Lommen, A. N.; Nice, D. J.; Stairs, I. H.

    2010-01-01

    High-precision pulsar timing relies on a solar system ephemeris in order to convert times of arrival (TOAs) of pulses measured at an observatory to the solar system barycenter. Any error in the conversion to the barycentric TOAs leads to a systematic variation in the observed timing residuals; specifically, an incorrect planetary mass leads to a predominantly sinusoidal variation having a period and phase associated with the planet's orbital motion about the Sun. By using an array of pulsars (PSRs J0437-4715, J1744-1134, J1857+0943, J1909-3744), the masses of the planetary systems from Mercury to Saturn have been determined. These masses are consistent with the best-known masses determined by spacecraft observations, with the mass of the Jovian system, 9.547921(2) x10 -4 M sun , being significantly more accurate than the mass determined from the Pioneer and Voyager spacecraft, and consistent with but less accurate than the value from the Galileo spacecraft. While spacecraft are likely to produce the most accurate measurements for individual solar system bodies, the pulsar technique is sensitive to planetary system masses and has the potential to provide the most accurate values of these masses for some planets.

  18. Analysis of Damped Mass-Spring Systems for Sound Synthesis

    Directory of Open Access Journals (Sweden)

    Don Morgan

    2009-01-01

    Full Text Available There are many ways of synthesizing sound on a computer. The method that we consider, called a mass-spring system, synthesizes sound by simulating the vibrations of a network of interconnected masses, springs, and dampers. Numerical methods are required to approximate the differential equation of a mass-spring system. The standard numerical method used in implementing mass-spring systems for use in sound synthesis is the symplectic Euler method. Implementers and users of mass-spring systems should be aware of the limitations of the numerical methods used; in particular we are interested in the stability and accuracy of the numerical methods used. We present an analysis of the symplectic Euler method that shows the conditions under which the method is stable and the accuracy of the decay rates and frequencies of the sounds produced.

  19. DECISION SUPPORT SYSTEM TO SUPPORT DECISION PROCESSES WITH DATA MINING

    OpenAIRE

    Rupnik, Rok; Kukar, Matjaž

    2007-01-01

    Traditional techniques of data analysis do not enable the solution of all kind of problems and for that reason they have become insufficient. This caused a newinterdisciplinary field of data mining to arise, encompassing both classical statistical, and modern machine learning techniques to support the data analysis and knowledge discovery from data. Data mining methods are powerful in dealing with large quantities of data, but on the other hand they are difficult to master by business users t...

  20. Mass storage system by using broadcast technology

    International Nuclear Information System (INIS)

    Fujii, Hirofumi; Itoh, Ryosuke; Manabe, Atsushi; Miyamoto, Akiya; Morita, Youhei; Nozaki, Tadao; Sasaki, Takashi; Watase, Yoshiyuko; Yamasaki, Tokuyuki

    1996-01-01

    There are many similarities between data recording systems for high energy physics and broadcast systems; the data flow is almost one-way, requires real-time recording; requires large-scale automated libraries for 24-hours operation, etc. In addition to these functional similarities, the required data-transfer and data-recording speeds are also close to those for near future experiments. For these reasons, we have collaborated with SONY Broadcast Company to study the usability of broadcast devices for our data storage system. Our new data storage system consists of high-speed data recorders and tape-robots which are originally based on the digital video-tape recorder and the tape-robot for broadcast systems. We are also studying the possibility to use these technologies for the online data-recording system for B-physics experiment at KEK. (author)

  1. Intelligence system for reactor operator informational support

    International Nuclear Information System (INIS)

    Prangishvili, I.V.; Pashchenko, F.F.; Saprykin, E.M.

    1989-01-01

    Problems related to creation and introduction at NPP of highly efficient and reliable systems for monitoring and control of working processes and intelligence-endowed systems of operator informational support (ISOIS) are considered. The main units included in ISOIS are considered. The main units included in ISOIS are described. The unit of current state monitoring provides information for the operator, which is necessary under concrete conditions for the process monitoring and control, so as to avoid emergencies and affers a program of actions in a dialogue mode for the operator. The identification unit is designed for the obtaining of assessed values of process parameters (neutron fields, temperatures, pressures) and basic equipment (reactivity coefficients, fuel rod weights, time of delay). The prediction unit evaluates the behaviour of process parameters and process state in various situations. 9 refs

  2. Semantic technologies in a decision support system

    Science.gov (United States)

    Wasielewska, K.; Ganzha, M.; Paprzycki, M.; Bǎdicǎ, C.; Ivanovic, M.; Lirkov, I.

    2015-10-01

    The aim of our work is to design a decision support system based on ontological representation of domain(s) and semantic technologies. Specifically, we consider the case when Grid / Cloud user describes his/her requirements regarding a "resource" as a class expression from an ontology, while the instances of (the same) ontology represent available resources. The goal is to help the user to find the best option with respect to his/her requirements, while remembering that user's knowledge may be "limited." In this context, we discuss multiple approaches based on semantic data processing, which involve different "forms" of user interaction with the system. Specifically, we consider: (a) ontological matchmaking based on SPARQL queries and class expression, (b) graph-based semantic closeness of instances representing user requirements (constructed from the class expression) and available resources, and (c) multicriterial analysis based on the AHP method, which utilizes expert domain knowledge (also ontologically represented).

  3. THE DECISION SUPPORT SYSTEM IN ROMANIA

    Directory of Open Access Journals (Sweden)

    Ana V.Monica POP

    2013-10-01

    Full Text Available In the present paper we will try to analyze the Decision Support System (DSS and the way in which it is applied or not in the Romanian Small and Medium Sized Enterprises (SMEs (with examples. We also will see if the system is beneficial for these Romanian Enterprises. We analyzed through interviews 50 small and medium-sized Romanian enterprises. They do not accept their name to be published. As a consequence, we will present only the results. It is underlined in the conclusions the differences between the small and the medium size enterprises in respect of the models they are using. The most important benefits of DSS (generally are represented by increased efficiency, competitive advantages and better managerial process.

  4. Licensing Support System: Preliminary data scope analysis

    International Nuclear Information System (INIS)

    1989-01-01

    The purpose of this analysis is to determine the content and scope of the Licensing Support System (LSS) data base. Both user needs and currently available data bases that, at least in part, address those needs have been analyzed. This analysis, together with the Preliminary Needs Analysis (DOE, 1988d) is a first effort under the LSS Design and Implementation Contract toward developing a sound requirements foundation for subsequent design work. These reports are preliminary. Further refinements must be made before requirements can be specified in sufficient detail to provide a basis for suitably specific system specifications. This document provides a baseline for what is known at this time. Additional analyses, currently being conducted, will provide more precise information on the content and scope of the LSS data base. 23 refs., 4 figs., 8 tabs

  5. Infrastructure to Support Hydrologic Research: Information Systems

    Science.gov (United States)

    Lall, U.; Duffy, C j

    2001-12-01

    Hydrologic Sciences are inherently interdisciplinary. Consequently, a myriad state variables are of interest to hydrologists. Hydrologic processes transcend many spatial and temporal scales, and their measurements reflect a variety of scales of support. The global water cycle is continuously modified by human activity through changes in land use, alteration of rivers, irrigation and groundwater pumping and through a modification of atmospheric composition. Since water is a solvent and a medium of transport, the water cycle fundamentally influences other material and energy cycles. This metaphor extends to the function that a hydrologic research information system needs to provide, to facilitate discovery in earth systems science, and to improve our capability to manage resources and hazards in a sustainable manner. At present, we have a variety of sources that provide data useful for hydrologic analyses, that range from massive remote sensed data sets, to sparsely sampled historical and paleo data. Consequently, the first objective of the Hydrologic Information Systems (HIS) group is to design a data services system that makes these data accessible in a uniform and useful way for specific, prioritized research goals. The design will include protocols for archiving and disseminating data from the Long Term Hydrologic Observatories (LTHOs), and comprehensive modeling experiments. Hydrology has a rich tradition of mathematical and statistical modeling of processes. However, given limited data and access to it, and a narrow focus that has not exploited connections to climatic and ecologic processes (among others), there have been only a few forays into diagnostic analyses of hydrologic fields, to identify and evaluate spatial and process teleconnections and an appropriate reduced space for modeling and understanding systems. The HIS initiative consequently proposes an investment in research and the provision of toolboxes to facilitate such analyses using the data

  6. Complexity in electronic negotiation support systems.

    Science.gov (United States)

    Griessmair, Michele; Strunk, Guido; Vetschera, Rudolf; Koeszegi, Sabine T

    2011-10-01

    It is generally acknowledged that the medium influences the way we communicate and negotiation research directs considerable attention to the impact of different electronic communication modes on the negotiation process and outcomes. Complexity theories offer models and methods that allow the investigation of how pattern and temporal sequences unfold over time in negotiation interactions. By focusing on the dynamic and interactive quality of negotiations as well as the information, choice, and uncertainty contained in the negotiation process, the complexity perspective addresses several issues of central interest in classical negotiation research. In the present study we compare the complexity of the negotiation communication process among synchronous and asynchronous negotiations (IM vs. e-mail) as well as an electronic negotiation support system including a decision support system (DSS). For this purpose, transcripts of 145 negotiations have been coded and analyzed with the Shannon entropy and the grammar complexity. Our results show that negotiating asynchronically via e-mail as well as including a DSS significantly reduces the complexity of the negotiation process. Furthermore, a reduction of the complexity increases the probability of reaching an agreement.

  7. A distributed clinical decision support system architecture

    Directory of Open Access Journals (Sweden)

    Shaker H. El-Sappagh

    2014-01-01

    Full Text Available This paper proposes an open and distributed clinical decision support system architecture. This technical architecture takes advantage of Electronic Health Record (EHR, data mining techniques, clinical databases, domain expert knowledge bases, available technologies and standards to provide decision-making support for healthcare professionals. The architecture will work extremely well in distributed EHR environments in which each hospital has its own local EHR, and it satisfies the compatibility, interoperability and scalability objectives of an EHR. The system will also have a set of distributed knowledge bases. Each knowledge base will be specialized in a specific domain (i.e., heart disease, and the model achieves cooperation, integration and interoperability between these knowledge bases. Moreover, the model ensures that all knowledge bases are up-to-date by connecting data mining engines to each local knowledge base. These data mining engines continuously mine EHR databases to extract the most recent knowledge, to standardize it and to add it to the knowledge bases. This framework is expected to improve the quality of healthcare, reducing medical errors and guaranteeing the safety of patients by helping clinicians to make correct, accurate, knowledgeable and timely decisions.

  8. Studies on mass transfer in electrochemical systems

    Energy Technology Data Exchange (ETDEWEB)

    Sundstroem, L.G.

    1997-10-01

    The first part is of an introductory nature. It contains a description of the methods used, a discussion of the physics of electrochemical cells with a liquid electrolyte, and a summary of the different studies made, including both those which have been reported in papers, and those which have not. Contributions with novel aspects include (* a derivation of the electro-neutrality condition from Maxwell`s equations of electrodynamics, and **) an argument in favour of the use of mass-averaged velocity in ion transport expressions. The second part focuses on specific cases. It consists of seven research papers which give a more detailed presentation of the main studies 40 refs, 6 figs

  9. Cognitive System Engineering Approach to Design of Work Support Systems

    DEFF Research Database (Denmark)

    Rasmussen, Jens

    1995-01-01

    The problem of designing work support systems for flexible, dynamic work environments is discussed and a framework for analysis of work in terms of behavior shaping constraints is described. The application of 'ecological interfaces' presenting to the user a map of the relational structure...... of the work space is advocated from the thesis that a map is a better guidance of discretionary tasks than is a route instruction. For the same reason, support of system design is proposed in terms of maps of the design territory, rather than in terms of guidelines....

  10. Creation of closed life support systems

    Science.gov (United States)

    Gitelson, I.

    The 40-year-long experience in devising ecological systems with a significantly closed material cycling (CES), which are intended for human life support outside the Earth's biosphere, allows us to state that this problem has been largely solved technically. To test the terrestrial prototypes of these systems: Bios in Krasnoyarsk, the Terrestrial Ecological System (TES) in Moscow, and Bioplex in Houston, crews of humans stayed inside them over long periods of time. In Bios-3 humans could be fully (100%) provided with regenerated air and water and with a vegetable part (80%) of their diet. One human requires 4.5 kW of light energy, which is equal to the light energy incident on an 8-m2 surface perpendicular to solar rays in the Earth's orbit. The regeneration of air and water can be alternatively performed by a 17-L2 microalgal cultivator with a light-receiving surface of 8 m at 2 kW of light energy or by a conveyer culture of agricultural plants. To regenerate the vegetable part of2 the diet to the full, the area must increase to 31.5 m per person. Similar values have been obtained in the TES and in Bioplex. It can be concluded that the system is ready to be implemented in the engineering-technical designs of specific versions: for orbital flights, for missions to Mars and other planets, and for stations on the Moon and Mars. To improve the CES further, a number of new key problems should be resolved. The first of them are: to robotize the technological processes and to establish an optimized system of the internal control of the CES by the crew working in it; to develop a hybrid physicochemical-biological technology for returning the dead-end products of biosynthesis into the system's cycling; to solve the fundamental problem of regenerating the human ration completely inside the CES by the autotrophic chemo - and photosynthesis. Once this problem is solved, the energy requirements for life support in space will be significantly reduced. This will also considerably

  11. MOODLE – COMPUTERIZED DISTANT LEARNING SUPPORT SYSTEM

    Directory of Open Access Journals (Sweden)

    V. A. Tunda

    2014-01-01

    Full Text Available Moodle (Modular Object-Oriented Dynamic Learning Environment is the system developed by the English-speaking community around the world for more than 10 years, supports both, offline and online training. In most cases, Moodle is used to support and connect learning face-to-face with online training, as well as with other types of learning. Moodle allows you to ask all sorts of questions and assess responses in a variety of ways. The central concept of Moodle is a course in which one or more teachers offer students resources (such as files, folders, Web pages and participate in interactive activities (such as forums, wikis, blogging, lessons, seminars, assignments, examinations. Students and teachers can change roles, mutually assess each other, share knowledge on the topics of study in the glossary and database system.In the English-speaking world, there are public sites with detailed documentation on Moodle, which is constantly verified and modified in accordance with emerging new versions of the system; Russian versions do not have public sites with detailed translation of the English-language documentation. On what and to whom you want to perform actions in the daily practice of the modern versions, only the barest of outlines on paid seminars and presentations to those who started the implementation of Moodle in your organization are given. And this despite the fact that the system has a great variety of Moodle (over 500 settings with different levels of functionality to be performed, to maintain and develop specially organized by the team of specialists. The question is not only about creating a training course in Moodle. It's about maintaining the health of the system within the institution, such as a University. Under the "health maintenance" means: availability and preservation of up-to-date documentation on system and manuals on Moodle separately for administrators, managers, teachers and students at their level, training consultants

  12. Safety implications of electronic driving support systems : an orientation.

    OpenAIRE

    Gundy, C.M. Steyvers, F.J.J.M. & Kaptein, N.A.

    1995-01-01

    This report focuses on traffic safety aspects of driving support systems. The report consists of two parts. First of all, the report discusses a number of topics, relevant for the implementation and evaluation of driving support systems. These topics include: (1) safety research into driving support systems: (2) the importance of research into driver models and the driving task; (3) horizontal integration of driving support systems; (4) vertical integration of driving support systems; (5) tas...

  13. Impact of bearing plates dimensions on interaction of mine workings support and rock mass

    Directory of Open Access Journals (Sweden)

    Marek Rotkegel

    2015-01-01

    Full Text Available The aim of the research presented in this article is to assess the impact of bearing plates dimensions on the interaction of steel arch support and rock mass. The analysis of the bearing plates was based on laboratory tests and numerical calculations using the FLAC3D program (a finite difference method and the strain-hardening/softening model based on prescribed variations of Mohr–Coulomb properties. The article presents the results of laboratory tests on selected bearing plates and the results of numerical analysis of the interaction between the bearing plates and rock mass with coal, clay stone and sandstone properties.

  14. Dynamical Mass Measurements of Contaminated Galaxy Clusters Using Support Distribution Machines

    Science.gov (United States)

    Ntampaka, Michelle; Trac, Hy; Sutherland, Dougal; Fromenteau, Sebastien; Poczos, Barnabas; Schneider, Jeff

    2018-01-01

    We study dynamical mass measurements of galaxy clusters contaminated by interlopers and show that a modern machine learning (ML) algorithm can predict masses by better than a factor of two compared to a standard scaling relation approach. We create two mock catalogs from Multidark’s publicly available N-body MDPL1 simulation, one with perfect galaxy cluster membership infor- mation and the other where a simple cylindrical cut around the cluster center allows interlopers to contaminate the clusters. In the standard approach, we use a power-law scaling relation to infer cluster mass from galaxy line-of-sight (LOS) velocity dispersion. Assuming perfect membership knowledge, this unrealistic case produces a wide fractional mass error distribution, with a width E=0.87. Interlopers introduce additional scatter, significantly widening the error distribution further (E=2.13). We employ the support distribution machine (SDM) class of algorithms to learn from distributions of data to predict single values. Applied to distributions of galaxy observables such as LOS velocity and projected distance from the cluster center, SDM yields better than a factor-of-two improvement (E=0.67) for the contaminated case. Remarkably, SDM applied to contaminated clusters is better able to recover masses than even the scaling relation approach applied to uncon- taminated clusters. We show that the SDM method more accurately reproduces the cluster mass function, making it a valuable tool for employing cluster observations to evaluate cosmological models.

  15. Embedded systems for supporting computer accessibility.

    Science.gov (United States)

    Mulfari, Davide; Celesti, Antonio; Fazio, Maria; Villari, Massimo; Puliafito, Antonio

    2015-01-01

    Nowadays, customized AT software solutions allow their users to interact with various kinds of computer systems. Such tools are generally available on personal devices (e.g., smartphones, laptops and so on) commonly used by a person with a disability. In this paper, we investigate a way of using the aforementioned AT equipments in order to access many different devices without assistive preferences. The solution takes advantage of open source hardware and its core component consists of an affordable Linux embedded system: it grabs data coming from the assistive software, which runs on the user's personal device, then, after processing, it generates native keyboard and mouse HID commands for the target computing device controlled by the end user. This process supports any operating system available on the target machine and it requires no specialized software installation; therefore the user with a disability can rely on a single assistive tool to control a wide range of computing platforms, including conventional computers and many kinds of mobile devices, which receive input commands through the USB HID protocol.

  16. Modular robotic system for forensic investigation support

    Science.gov (United States)

    Kowalski, Grzegorz; Główka, Jakub; Maciaś, Mateusz; Puchalski, Sławomir

    2017-10-01

    Forensic investigation on the crime scene is an activity that requires not only knowledge about the ways of searching for evidence, collecting and processing them. In some cases the area of operation might not be properly secured and poses threat to human health or life. Some devices or materials may be left intentionally or not to injure potential investigators. Besides conventional explosives, threats can be in form of CBRN materials, which have not only immediate effect on the exposed personnel, but can contaminate further people, when being transferred for example on clothes or unsecured equipment. In this case a risk evaluation should be performed, that can lead to conclusions that it is too dangerous for investigators to work. In that kind of situation remote devices, which are able to examine the crime scene and secure samples, can be used. In the course of R&D activities PIAP developed a system, which is based on small UGV capable of carrying out inspection of suspicious places and securing evidence, when needed. The system consists of remotely controlled mobile robot, its control console and a set of various inspection and support tools, that enable detection of CBRN threats as well as revelation, documentation and securing of the evidence. This paper will present main features of the system, like mission adjustment possibilities and communication aspects, and also examples of the forensic accessories.

  17. Progress of the AVNG System - Attribute Verification System with Information Barriers for Mass Isotopics Measurements

    International Nuclear Information System (INIS)

    Budnikov, D.; Bulatov, M.; Jarikhine, I.; Lebedev, B.; Livke, A.; Modenov, A.; Morkin, A.; Razinkov, S.; Tsaregorodtsev, D.; Vlokh, A.; Yakovleva, S.; Elmont, T.H.; Langner, D.C.; MacArthur, D.W.; Mayo, D.R.; Smith, M.K.; Luke, S.J.

    2005-01-01

    An attribute verification system (AVNG) with information barriers for mass and isotopics measurements has been designed and its fabrication is nearly completed. The AVNG is being built by scientists at the Russian Federal Nuclear Center-VNIIEF, with support of Los Alamos National Laboratory (LANL) and Lawrence Livermore National Laboratory (LLNL). Such a system could be used to verify the presence of several unclassified attributes of classified material with no classified information release. The system is comprised of a neutron multiplicity counter and gamma-spectrometry system based on a high purity germanium gamma detector (nominal relative efficiency @ 1332 keV 50%) and digital gamma-ray spectrometer DSPEC PLUS . The neutron multiplicity counter is a three ring counter with 164 3 He tubes. The system was designed to measure prototype containers 491 mm in diameter and 503 mm high. This paper provides a brief history of the project and documents the progress of this effort with drawings and photographs.

  18. Supporting Space Systems Design via Systems Dependency Analysis Methodology

    Science.gov (United States)

    Guariniello, Cesare

    assess the behavior of each system based on its internal status and on the topology of its dependencies on systems connected to it. Designers and decision makers can therefore quickly analyze and explore the behavior of complex systems and evaluate different architectures under various working conditions. The methods support educated decision making both in the design and in the update process of systems architecture, reducing the need to execute extensive simulations. In particular, in the phase of concept generation and selection, the information given by the methods can be used to identify promising architectures to be further tested and improved, while discarding architectures that do not show the required level of global features. The methods, when used in conjunction with appropriate metrics, also allow for improved reliability and risk analysis, as well as for automatic scheduling and re-scheduling based on the features of the dependencies and on the accepted level of risk. This dissertation illustrates the use of the two methods in sample aerospace applications, both in the operational and in the developmental domain. The applications show how to use the developed methodology to evaluate the impact of failures, assess the criticality of systems, quantify metrics of interest, quantify the impact of delays, support informed decision making when scheduling the development of systems and evaluate the achievement of partial capabilities. A larger, well-framed case study illustrates how the Systems Operational Dependency Analysis method and the Systems Developmental Dependency Analysis method can support analysis and decision making, at the mid and high level, in the design process of architectures for the exploration of Mars. The case study also shows how the methods do not replace the classical systems engineering methodologies, but support and improve them.

  19. Towards a generic user support system (GUS)

    International Nuclear Information System (INIS)

    Garland, W.J.; Wilson, R.J.

    1993-01-01

    One relevant issue confronting the operator of a nuclear power plant is information and task overload. The goal, then, of the various developers is to improve the current situations by creating an environment where the operator can perform at optimum capacity. This is to be accomplished by providing tools and techniques which reduce operator involvement in low level tasks (freeing up time for higher level cognitive tasks) and assist in information and knowledge manipulation so that high level tasks can be performed more efficiently. This paper reviews the operational environment of nuclear plants from the viewpoint of engineering design and from the viewpoint of the operators and technical support staff. Principles are advanced for a generic operator companion. These design principles are being applied to a test case: the Point Lepreau NGS secondary side central sampling system. 6 refs., 6 figs

  20. Polychannel Systems for Mass Digital Communication

    Science.gov (United States)

    1988-07-01

    years additional systems similar to ours have become operational, including X*Press, Main- stream Data, and Stargate . X*Press Information Services...cities in the United States, and Stargate uses the satellite TV station WTBS to transmit electronic bulletin boards to remote com- puter sites

  1. Convective heat and mass transfer in rotating disk systems

    CERN Document Server

    Shevchuk, Igor V

    2009-01-01

    The book describes results of investigations of a series of convective heat and mass transfer problems in rotating-disk systems. Methodology used included integral methods, self-similar and approximate analytical solutions, as well as CFD.

  2. Model-Based Systems Engineering Approach to Managing Mass Margin

    Science.gov (United States)

    Chung, Seung H.; Bayer, Todd J.; Cole, Bjorn; Cooke, Brian; Dekens, Frank; Delp, Christopher; Lam, Doris

    2012-01-01

    When designing a flight system from concept through implementation, one of the fundamental systems engineering tasks ismanaging the mass margin and a mass equipment list (MEL) of the flight system. While generating a MEL and computing a mass margin is conceptually a trivial task, maintaining consistent and correct MELs and mass margins can be challenging due to the current practices of maintaining duplicate information in various forms, such as diagrams and tables, and in various media, such as files and emails. We have overcome this challenge through a model-based systems engineering (MBSE) approach within which we allow only a single-source-of-truth. In this paper we describe the modeling patternsused to capture the single-source-of-truth and the views that have been developed for the Europa Habitability Mission (EHM) project, a mission concept study, at the Jet Propulsion Laboratory (JPL).

  3. Research on high-performance mass storage system

    International Nuclear Information System (INIS)

    Cheng Yaodong; Wang Lu; Huang Qiulan; Zheng Wei

    2010-01-01

    With the enlargement of scientific experiments, more and more data will be produced, which brings great challenge to storage system. Large storage capacity and high data access performance are both important to Mass storage system. This paper firstly reviews some kinds of popular storage systems including network storage system, SAN-based sharing system, WAN File system, object-based parallel file system, hierarchical storage system and cloud storage systems. Then some key technologies are presented. Finally, this paper takes BES storage system as an example and introduces its requirements, architecture and operation results. (authors)

  4. Executive Support Systems: An Innovation Decision Perspective

    Science.gov (United States)

    1990-01-01

    pioneers: more education, higher social status, more exposure to mass media, more communicative, cosmopolite , more change agent contact, and more...esoteric, cosmopolite interpersonal channels perform the role of mass media for garnering awareness. Due to their wide network, pioneers often act as

  5. Aerosol mass spectrometry systems and methods

    Science.gov (United States)

    Fergenson, David P.; Gard, Eric E.

    2013-08-20

    A system according to one embodiment includes a particle accelerator that directs a succession of polydisperse aerosol particles along a predetermined particle path; multiple tracking lasers for generating beams of light across the particle path; an optical detector positioned adjacent the particle path for detecting impingement of the beams of light on individual particles; a desorption laser for generating a beam of desorbing light across the particle path about coaxial with a beam of light produced by one of the tracking lasers; and a controller, responsive to detection of a signal produced by the optical detector, that controls the desorption laser to generate the beam of desorbing light. Additional systems and methods are also disclosed.

  6. A GPU Accelerated Spring Mass System for Surgical Simulation

    DEFF Research Database (Denmark)

    Mosegaard, Jesper; Sørensen, Thomas Sangild

    2005-01-01

    There is a growing demand for surgical simulators to dofast and precise calculations of tissue deformation to simulateincreasingly complex morphology in real-time. Unfortunately, evenfast spring-mass based systems have slow convergence rates for largemodels. This paper presents a method to accele...... to accelerate computation of aspring-mass system in order to simulate a complex organ such as theheart. This acceleration is achieved by taking advantage of moderngraphics processing units (GPU)....

  7. Database system selection for marketing strategies support in information systems

    Directory of Open Access Journals (Sweden)

    František Dařena

    2007-01-01

    Full Text Available In today’s dynamically changing environment marketing has a significant role. Creating successful marketing strategies requires large amount of high quality information of various kinds and data types. A powerful database management system is a necessary condition for marketing strategies creation support. The paper briefly describes the field of marketing strategies and specifies the features that should be provided by database systems in connection with these strategies support. Major commercial (Oracle, DB2, MS SQL, Sybase and open-source (PostgreSQL, MySQL, Firebird databases are than examined from the point of view of accordance with these characteristics and their comparison in made. The results are useful for making the decision before acquisition of a database system during information system’s hardware architecture specification.

  8. Defense Contract Management Command Support to System Acquisition Program Managers

    National Research Council Canada - National Science Library

    1999-01-01

    .... This report discusses the planning of contract administration office support to system acquisition program managers through the program integration process and the customer support outreach program...

  9. Comparison of Theoretical and Experimental Mass Transfer Coefficients of Gases in Supported Ionic Liquid Membranes

    Czech Academy of Sciences Publication Activity Database

    Kárászová, Magda; Šimčík, Miroslav; Friess, K.; Randová, A.; Jansen, J. C.; Růžička, Marek; Sedláková, Zuzana; Izák, Pavel

    2013-01-01

    Roč. 118, 30 OCT (2013), s. 255-263 ISSN 1383-5866 R&D Projects: GA ČR GAP106/10/1194; GA MŠk(CZ) 7C11009 Grant - others:RFCS(XE) RFCR-CT-2010-00009; INP(IT) PON01_01840; HA MŠk(CZ) CZ.1.05/2.1.00/03.0071 Institutional support: RVO:67985858 Keywords : biogas purification * supported ionic liquid membranes * mass transfer coefficients Subject RIV: CI - Industrial Chemistry, Chemical Engineering Impact factor: 3.065, year: 2013

  10. Mass transfer with chemical reaction in multiphase systems

    International Nuclear Information System (INIS)

    Alper, E.

    1983-01-01

    These volumes deal with the phenomenon of 'mass transfer with chemical reaction' which is of industrial, biological and physiological importance. In process engineering, it is encountered both in separation processes and in reaction engineering and both aspects are covered here in four sections: introduction; gas-liquid system; liquid-liquid system; and gas-liquid-solid system

  11. Injection system of the minicyclotron accelerator mass spectrometer

    International Nuclear Information System (INIS)

    Liu Yonghao; Li Deming; Chen Maobai; Lu Xiangshun

    1999-01-01

    The existing injection system of the SMCAMS (super-sensitive mini-cyclotron accelerator mass spectrometer) is described together with the discussion of its disadvantages exposed after having been operating for five years, which provides a basis for consideration of improvements to the injection system. An optimized injection system with an analytical magnet added prior to the minicyclotron has been proposed and calculated

  12. A portable, automated, inexpensive mass and balance calibration system

    International Nuclear Information System (INIS)

    Maxwell, S.L. III; Clark, J.P.

    1987-01-01

    Reliable mass measurements are essential for a nuclear production facility or process control laboratory. DOE Order 5630.2 requires that traceable standards be used to calibrate and monitor equipment used for nuclear material measurements. To ensure the reliability of mass measurements and to comply with DOE traceable requirements, a portable, automated mass and balance calibration system is used at the Savannah River Plant. Automation is achieved using an EPSON HX-20 notebook computer, which can be operated via RS232C interfacing to electronic balances or function with manual data entry if computer interfacing is not feasible. This economical, comprehensive, user-friendly system has three main functions in a mass measurement control program (MMCP): balance certification, calibration of mass standards, and daily measurement of traceable standards. The balance certification program tests for accuracy, precision, sensitivity, linearity, and cornerloading versus specific requirements. The mass calibration program allows rapid calibration of inexpensive mass standards traceable to certified Class S standards. This MMCP permits daily measurement of traceable standards to monitor the reliability of balances during routine use. The automated system verifies balance calibration, stores results for future use, and provides a printed control chart of the stored data. Another feature of the system permits three different weighing routines that accommodate our need for varying degrees of reliability in routine weighing operations. 1 ref

  13. A portable, automated, inexpensive mass and balance calibration system

    International Nuclear Information System (INIS)

    Maxwell, S.L. III; Clark, J.P.

    1987-01-01

    Reliable mass measurements are essential for a nuclear production facility or process control laboratory. DOE Order 5630.2 requires that traceable standards be used to calibrate and monitor equipment used for nuclear material measurements. To ensure the reliability of mass measurements and to comply with DOE traceability requirements, a portable, automated mass and balance calibration system is used at the Savannah River Plant. Automation is achieved using an EPSON HX-20 notebook computer, which can be operated via RS232C interfacing to electronic balances or function with manual data entry if computer interfacing is not feasible. This economical, comprehensive, user-friendly system has three main functions in a mass measurement control program (MMCP): balance certification, calibration of mass standards, and daily measurement of traceable standards. The balance certification program tests for accuracy, precision, sensitivity, linearity, and cornerloading versus specific requirements. The mass calibration program allows rapid calibration of inexpensive mass standards traceable to certified Class S standards. This MMCP permits daily measurement of traceable standards to monitor the reliability of balances during routine use. The automated system verifies balance calibration, stores results for future use, and provides a printed control chart of the stored data. Another feature of the system permits three different weighing routines that accommodate their need for varying degrees of reliability in routine weighing operations

  14. Environmental Control and Life Support System (ECLSS) System Engineering Workshop

    Science.gov (United States)

    Peterson, Laurie J.

    2009-01-01

    This slide presentation begins with a recap on a previous lecture on the ECLSS subsystems, and the various types (i.e., Non-regenerative vs Regenerative, open loop vs closed loop, and physical-chemical vs bioregenerative) It also recaps the Equivalent system mass (ESM) metric. The presentation continues with a review of the ECLSS of the various NASA manned space exploration programs from Mercury, to the current planned Altair lunar landing, and Lunar base operations. There is also a team project to establish the ESM of two conceptualized missions.

  15. A Support Database System for Integrated System Health Management (ISHM)

    Science.gov (United States)

    Schmalzel, John; Figueroa, Jorge F.; Turowski, Mark; Morris, John

    2007-01-01

    The development, deployment, operation and maintenance of Integrated Systems Health Management (ISHM) applications require the storage and processing of tremendous amounts of low-level data. This data must be shared in a secure and cost-effective manner between developers, and processed within several heterogeneous architectures. Modern database technology allows this data to be organized efficiently, while ensuring the integrity and security of the data. The extensibility and interoperability of the current database technologies also allows for the creation of an associated support database system. A support database system provides additional capabilities by building applications on top of the database structure. These applications can then be used to support the various technologies in an ISHM architecture. This presentation and paper propose a detailed structure and application description for a support database system, called the Health Assessment Database System (HADS). The HADS provides a shared context for organizing and distributing data as well as a definition of the applications that provide the required data-driven support to ISHM. This approach provides another powerful tool for ISHM developers, while also enabling novel functionality. This functionality includes: automated firmware updating and deployment, algorithm development assistance and electronic datasheet generation. The architecture for the HADS has been developed as part of the ISHM toolset at Stennis Space Center for rocket engine testing. A detailed implementation has begun for the Methane Thruster Testbed Project (MTTP) in order to assist in developing health assessment and anomaly detection algorithms for ISHM. The structure of this implementation is shown in Figure 1. The database structure consists of three primary components: the system hierarchy model, the historical data archive and the firmware codebase. The system hierarchy model replicates the physical relationships between

  16. Marketing analysis support system; Marketing bunseki shien system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-01-10

    Fuji Electric Co., Ltd., in collaboration with Shitashion Japan and Arthur Andersen Ltd., developed a 'marketing analysis support system' which integrally analyzes evaluation factors of various dimensions explaining consumers' purchasing behaviors and which supports business for the efficient operation of product development and demand prediction. This system breaks down products into each evaluation factor from psychological and physical viewpoints, and carries out various kinds of multivariate analysis, thereby making it easy to understand visually, for example, what evaluation factors decide relative positional relations between evaluation factors or between products as well as the position of a product in the whole. Further, more precise marketing analysis and prediction become possible by visually grasping blank areas of products, extent of competition, distribution of products, composition of product series, etc. (translated by NEDO)

  17. Control system upgrades support better plant economics

    International Nuclear Information System (INIS)

    De Grosbois, J.; Hepburn, A.; Storey, H.; Basso, R.; Kumar, V.

    2002-01-01

    This paper (second in the series, see [1]) provides insight on how nuclear plants can achieve better efficiencies and reduced operations and maintenance (O and M) costs through focused control system upgrades. An understanding of this relationship is necessary to properly assess the economics of plant refurbishment decisions. Traditional economic feasibility assessment methods such as benefit cost analysis (BCA), internal rate of return (IRR), benefit cost ratios (B/C), or payback analysis are often performed without full consideration of project alternatives, quantified benefits, and life cycle costing. Consideration must be given to not only capital cost and project risk, but also to the potential economic benefits of new technology and added functionality offered by plant upgrades. Recent experience shows that if upgrades are focused on priority objectives, and are effectively implemented, they can deliver significant payback over the life of the plant, sometimes orders of magnitude higher than their initial capital cost. The following discussion explores some of the key issues and rationale behind upgrade decisions and their impact on improved plant efficiency and reduced O and M costs. A subsequent paper will explain how the justification for these improvements can be captured in an economic analysis and feasibility study to support strategic decision-making in a plant refurbishment context. (author)

  18. Recommendations on future development of decision support systems

    DEFF Research Database (Denmark)

    MCarthur, Stephen; Chen, Minjiang; Marinelli, Mattia

    Deliverable 8.3 reports on the consolidation of experiences from visualisation, decision support prototypes experiments and recommendations on future developments of decision support systems......Deliverable 8.3 reports on the consolidation of experiences from visualisation, decision support prototypes experiments and recommendations on future developments of decision support systems...

  19. A Computuerized Operator Support System Prototype

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Ken [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boring, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lew, Roger [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ulrich, Tom [Idaho National Lab. (INL), Idaho Falls, ID (United States); Villim, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2013-11-01

    A report was published by the Idaho National Laboratory in September of 2012, entitled Design to Achieve Fault Tolerance and Resilience, which described the benefits of automating operator actions for transients. The report identified situations in which providing additional automation in lieu of operator actions would be advantageous. It recognized that managing certain plant upsets is sometimes limited by the operator’s ability to quickly diagnose the fault and to take the needed actions in the time available. Undoubtedly, technology is underutilized in the nuclear power industry for operator assistance during plant faults and operating transients. In contrast, other industry sectors have amply demonstrated that various forms of operator advisory systems can enhance operator performance while maintaining the role and responsibility of the operator as the independent and ultimate decision-maker. A computerized operator support system (COSS) is proposed for use in nuclear power plants to assist control room operators in addressing time-critical plant upsets. A COSS is a collection of technologies to assist operators in monitoring overall plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. The COSS does not supplant the role of the operator, but rather provides rapid assessments, computations, and recommendations to reduce workload and augment operator judgment and decision-making during fast-moving, complex events. This project proposes a general model for a control room COSS that addresses a sequence of general tasks required to manage any plant upset: detection, validation, diagnosis, recommendation, monitoring, and recovery. The model serves as a framework for assembling a set of technologies that can be interrelated to assist with each of these tasks. A prototype COSS has been developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based

  20. A Computuerized Operator Support System Prototype

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Ken [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boring, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lew, Roger [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ulrich, Tom [Idaho National Lab. (INL), Idaho Falls, ID (United States); Villim, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2013-08-01

    A report was published by the Idaho National Laboratory in September of 2012, entitled Design to Achieve Fault Tolerance and Resilience, which described the benefits of automating operator actions for transients. The report identified situations in which providing additional automation in lieu of operator actions would be advantageous. It recognized that managing certain plant upsets is sometimes limited by the operator’s ability to quickly diagnose the fault and to take the needed actions in the time available. Undoubtedly, technology is underutilized in the nuclear power industry for operator assistance during plant faults and operating transients. In contrast, other industry sectors have amply demonstrated that various forms of operator advisory systems can enhance operator performance while maintaining the role and responsibility of the operator as the independent and ultimate decision-maker. A computerized operator support system (COSS) is proposed for use in nuclear power plants to assist control room operators in addressing time-critical plant upsets. A COSS is a collection of technologies to assist operators in monitoring overall plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. The COSS does not supplant the role of the operator, but rather provides rapid assessments, computations, and recommendations to reduce workload and augment operator judgment and decision-making during fast-moving, complex events. This project proposes a general model for a control room COSS that addresses a sequence of general tasks required to manage any plant upset: detection, validation, diagnosis, recommendation, monitoring, and recovery. The model serves as a framework for assembling a set of technologies that can be interrelated to assist with each of these tasks. A prototype COSS has been developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based

  1. Mass distribution law of systems of protocluster fragments

    Energy Technology Data Exchange (ETDEWEB)

    Ferraioli, F; Virgopia, N [Rome Univ. (Italy). Ist. di Matematica

    1979-02-01

    Starting from the hypothesis of coalescence through inelastic collisions of small fast moving interstellar gas clouds, an attempt has been made to study the evolutionary mass distribution of a system of fragments simulating a protocluster. The assumption of a mass spectrum with a continuous injection of newly formed entities into the primeval system, and the condition of gravitational reduction of the impact cross-section, have been considered. Comparisons of numerical experiments with the mass spectrum in some well-known young galactic clusters, confirm the mass distribution power-law already obtained by other authors. The empirical Schmidt's law concerning the rate of star formation is also confirmed. The hypothesis of the universal validity of the luminosity function, should not be 'a priori' rejected.

  2. MOIDSS?- Mobile Online Intelligent Decision Support System, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — GRID has had a successfully completed Phase I 'Mobile Online Intelligent Decision Support System' (MOIDSS). The system developed into a total solution that supports...

  3. Principles and applications of a research-oriented gas chromatography-mass spectrometry data system

    International Nuclear Information System (INIS)

    Campana, J.E.; Risby, T.H.; Jurs, P.C.

    1979-01-01

    A research-oriented gas chromatography-mass spectrometry data system for a quadrupole mass spectrometer has been developed based on a centrally located departmental computer facility. An overview of the hardware and software system is presented, emphasizing the important aspects of on-line computer data acquisition and control and the design philosophy used in the development of the system. The application of the system is demonstrated by the g.c.-m.s. analysis of a mixture of four transition metal β-diketonates (Al, Cr, Rh, and Ru tris-1,1,1-trifluoro-pentane-2,4-dionate). This anaysis involved vacuum gas chromatography with a support-coated open tubular column and detection of the eluent by chemical ionization mass spectrometry. The results demonstrate the data system capabilities and indicate the utility of the combined methodologies. (Auth.)

  4. Buffer mass test - data aquisition and data processing systems

    International Nuclear Information System (INIS)

    Hagvall, B.

    1982-08-01

    This report describes data aquisition and data processing systems used for the Buffer Mass Test at Stripa. A data aquisition system, designed mainly to provide high reliability, in Stripa produces raw-data log tapes. Copies of these tapes are mailed to the computer center at the University of Luleaa for processing of raw-data. The computer systems in Luleaa offer a wide range of processing facilities: large mass storage units, several plotting facilities, programs for processing and monitoring of vast amounts of data, etc.. (Author)

  5. An improved data acquisition system for isotopic ratio mass spectrometers

    International Nuclear Information System (INIS)

    Saha, T.K.; Reddy, B.; Nazare, C.K.; Handu, V.K.

    1999-01-01

    Isotopic ratio mass spectrometers designed and fabricated to measure the isotopic ratios with a precision of better than 0.05%. In order to achieve this precision, the measurement system consisting of ion signal to voltage converters, analog to digital converters, and data acquisition electronics should be at least one order better than the overall precision of measurement. Using state of the art components and techniques, a data acquisition system, which is an improved version of the earlier system, has been designed and developed for use with multi-collector isotopic ratio mass spectrometers

  6. The minyan as a psychological support system.

    Science.gov (United States)

    Scheidlinger, S

    1997-08-01

    Most individuals participate in some of the rituals and/or regular activities of religious institutions such as churches or synagogues. Through such involvements, people are offered vital assistance in dealing with developmental changes, opportunities for personal development and for group support, and more generally, a sense of continuity and of meaning in life. This paper deals with only one small aspect of Jewish observance, an aspect of the centuries-old required weekly prayer groups-the minyan. The prime emphasis resides in the rarely recognized, nonliturgical dimension of this small group experience. Using psychoanalysis in the sense of a general psychology as background, I have considered the minyan as combining elements of a psychological support system and of a small group. In addition to the gratification of affiliative needs (social hunger) and the countering of loneliness and of isolation, this group experience helps its members maintain an intergenerational sense of personal identity and of self-esteem. In the face of marked life stressors such as death in the family, religious institutions such as the minyan, with its prescribed ritual steps for grieving (i.e., kaddish), fulfill especially significant preventive and restitutive mental health functions. I have also hypothesized that on a covert, fantasy level, the caring and nurturing family-like weekday minyan may even represent a mother-symbol (mother group) in line with people's universal need to establish a psychological union with others, thus restoring an earlier, conflict-free state of the child-mother bond. In an extended societal sense, the earlier emphasis in Western cultures on the virtual worship of individuality, autonomy, and independence has given way recently to a renewed appreciation of cooperation, communalism, and altruism. The minyan, as a small religious communal aggregate with its inherent climate of mutuality, reciprocity, and continuity, has, in a sense, anticipated these new

  7. Mass

    International Nuclear Information System (INIS)

    Quigg, Chris

    2007-01-01

    In the classical physics we inherited from Isaac Newton, mass does not arise, it simply is. The mass of a classical object is the sum of the masses of its parts. Albert Einstein showed that the mass of a body is a measure of its energy content, inviting us to consider the origins of mass. The protons we accelerate at Fermilab are prime examples of Einsteinian matter: nearly all of their mass arises from stored energy. Missing mass led to the discovery of the noble gases, and a new form of missing mass leads us to the notion of dark matter. Starting with a brief guided tour of the meanings of mass, the colloquium will explore the multiple origins of mass. We will see how far we have come toward understanding mass, and survey the issues that guide our research today.

  8. Specialized Gas Chromatography--Mass Spectrometry Systems for Clinical Chemistry.

    Science.gov (United States)

    Gochman, Nathan; And Others

    1979-01-01

    A discussion of the basic design and characteristics of gas chromatography-mass spectrometry systems used in clinical chemistry. A comparison of three specific systems: the Vitek Olfax IIA, Hewlett-Packard HP5992, and Du Pont DP-102 are included. (BB)

  9. Mass memory formatter subsystem of the adaptive intrusion data system

    International Nuclear Information System (INIS)

    Corlis, N.E.

    1980-09-01

    The Mass Memory Formatter was developed as part of the Adaptive Intrusion Data System (AIDS) to control a 2.4-megabit mass memory. The data from a Memory Controlled Processor is formatted before it is stored in the memory and reformatted during the readout mode. The data is then transmitted to a NOVA 2 minicomputer-controlled magnetic tape recorder for storage. Techniques and circuits are described

  10. Using systems thinking to support clinical system transformation.

    Science.gov (United States)

    Best, Allan; Berland, Alex; Herbert, Carol; Bitz, Jennifer; van Dijk, Marlies W; Krause, Christina; Cochrane, Douglas; Noel, Kevin; Marsden, Julian; McKeown, Shari; Millar, John

    2016-05-16

    Purpose - The British Columbia Ministry of Health's Clinical Care Management initiative was used as a case study to better understand large-scale change (LSC) within BC's health system. Using a complex system framework, the purpose of this paper is to examine mechanisms that enable and constrain the implementation of clinical guidelines across various clinical settings. Design/methodology/approach - Researchers applied a general model of complex adaptive systems plus two specific conceptual frameworks (realist evaluation and system dynamics mapping) to define and study enablers and constraints. Focus group sessions and interviews with clinicians, executives, managers and board members were validated through an online survey. Findings - The functional themes for managing large-scale clinical change included: creating a context to prepare clinicians for health system transformation initiatives; promoting shared clinical leadership; strengthening knowledge management, strategic communications and opportunities for networking; and clearing pathways through the complexity of a multilevel, dynamic system. Research limitations/implications - The action research methodology was designed to guide continuing improvement of implementation. A sample of initiatives was selected; it was not intended to compare and contrast facilitators and barriers across all initiatives and regions. Similarly, evaluating the results or process of guideline implementation was outside the scope; the methods were designed to enable conversations at multiple levels - policy, management and practice - about how to improve implementation. The study is best seen as a case study of LSC, offering a possible model for replication by others and a tool to shape further dialogue. Practical implications - Recommended action-oriented strategies included engaging local champions; supporting local adaptation for implementation of clinical guidelines; strengthening local teams to guide implementation; reducing

  11. Investigating mass transfer in symbiotic systems with hydrodynamic simulations

    Science.gov (United States)

    de Val-Borro, Miguel; Karovska, Margarita; Sasselov, Dimitar D.

    2014-06-01

    We investigate gravitationally focused wind accretion in binary systems consisting of an evolved star with a gaseous envelope and a compact accreting companion. We study the mass accretion and formation of an accretion disk around the secondary caused by the strong wind from the primary late-type component using global 2D and 3D hydrodynamic numerical simulations. In particular, the dependence on the mass accretion rate on the mass loss rate, wind temperature and orbital parameters of the system is considered. For a typical slow and massive wind from an evolved star the mass transfer through a focused wind results in rapid infall onto the secondary. A stream flow is created between the stars with accretion rates of a 2-10% percent of the mass loss from the primary. This mechanism could be an important method for explaining periodic modulations in the accretion rates for a broad range of interacting binary systems and fueling of a large population of X-ray binary systems. We test the plausibility of these accretion flows indicated by the simulations by comparing with observations of the symbiotic CH Cyg variable system.

  12. Supporting of mine workings and design of support systems. Madenlerde tahkimat isleri ve tasarmi

    Energy Technology Data Exchange (ETDEWEB)

    Biron, C; Arioglu, E; (Istanbul Teknik Universitesi, Maden Fakultesi)

    1980-01-01

    This article deals with elements of elasticity in rocks and examines the engineering properties of rocks. It includes stress distributions around mine openings and deformations of mine openings. Strata control concept in coal mining is explained. Support systems in stone drifts, gateways, shafts and longwalls are discussed; timber supports, steel arches, articulated arches, roof bolting, concrete supports, supports on mechanized faces are detailed. Emphasis is placed upon engineering properties of materials of support systems. The design concepts of mine support systems are described. The objects of the design are expressed with several numerical examples. It concludes with stowing: pneumatic stowing, and hydraulic stowing in metal and coal mining.

  13. System support software for TSTA [Tritium Systems Test Assembly

    International Nuclear Information System (INIS)

    Claborn, G.W.; Mann, L.W.; Nielson, C.W.

    1987-10-01

    The fact that Tritium Systems Test Assembly (TSTA) is an experimental facility makes it impossible and undesirable to try to forecast the exact software requirements. Thus the software had to be written in a manner that would allow modifications without compromising the safety requirements imposed by the handling of tritium. This suggested a multi-level approach to the software. In this approach (much like the ISO network model) each level is isolated from the level below and above by cleanly defined interfaces. For example, the subsystem support level interfaces with the subsystem hardware through the software support level. Routines in the software support level provide operations like ''OPEN VALVE'' and CLOSE VALVE'' to the subsystem level. This isolates the subsystem level from the actual hardware. This is advantageous because changes can occur in any level without the need for propagating the change to any other level. The TSTA control system consists of the hardware level, the data conversion level, the operator interface level, and the subsystem process level. These levels are described

  14. 30 CFR 75.817 - Cable handling and support systems.

    Science.gov (United States)

    2010-07-01

    ... High-Voltage Longwalls § 75.817 Cable handling and support systems. Longwall mining equipment must be provided with cable-handling and support systems that are constructed, installed and maintained to minimize... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Cable handling and support systems. 75.817...

  15. Nutritional support in patients with systemic sclerosis.

    Science.gov (United States)

    Ortiz-Santamaria, Vera; Puig, Celia; Soldevillla, Cristina; Barata, Anna; Cuquet, Jordi; Recasens, Asunción

    2014-01-01

    Systemic sclerosis (SSc) is a chronic multisystem autoimmune disease which involves the gastrointestinal tract in about 90% of cases. It may contribute to nutritional deterioration. To assess whether the application of a nutritional support protocol to these patients could improve their nutritional status and quality of life. Single center prospective study, performed on an outpatient basis, in a county hospital. The Malnutrition Universal Screening Tool (MUST) was used to screen risk for malnutrition. Health questionnaire SF-36 and the Hospital Anxiety and Depression Scale were used to assess quality of life and psychopathology respectively. Weight, height, energy and protein requirements, macronutrient intake and nutritional biochemical parameters were evaluated. Nutritional intervention was performed in patients at risk for malnutrition. Of the 72 patients, 12.5% were at risk for malnutrition. Iron deficiency anemia (18.35%) and vitamin D deficiency (54%) were the most frequently observed nutritional deficits. The questionnaires on psychopathology and quality of life showed a high prevalence of anxiety and depression, and lower level poor quality of life in the physical and mental component. No significant improvements were observed in the weight, food intake, nutritional biochemical parameters, psychopathology and quality of life follow-up. Dietary intervention was able to maintain body weight and food intake. Iron deficiency anemia and vitamin D deficiency improved with iron and vitamine D supplements. No deterioration was observed in psychological assessment or quality of life. Studies with larger numbers of patients are needed to assess the efficacy of this intervention. Copyright © 2013 Elsevier España, S.L.U. All rights reserved.

  16. An online infertility clinical decision support system

    Directory of Open Access Journals (Sweden)

    Fabio Diniz de Souza

    2017-01-01

    Full Text Available Objective: To explore some possibilities of computer applications in medicine, and to discuss an online infertility clinical decision support system.Methods: Retrospective data were obtained from 52 couples, and then entered into the online tool. Both its results and the initial diagnoses obtained by the treating physicians were compared with the final diagnoses established by laparoscopy and other diagnostic tests (semen analysis, hormone analysis, endometrial biopsy, ultrasound and hysteroscopy. The initial hypothesis of the research was that the online tool's output was statistically associated with the final diagnoses. In order to verify that hypothesis, a chi-square (χ2 test with Yates' correction for continuity (P<0.05 was performed to verify if the online tool's and the doctor's diagnoses were statistically associated with the final diagnoses.Results: Four etiological factors were present in more than 50% of the couples (ovarian, tubal-peritoneal, uterine, and endometriosis. The statistical results confirmed the research hypothesis for eight out of the nine etiological factors (ovarian, tubal-peritoneal, uterine, cervical, male, vaginal, psychosomatic, and endometriosis; P<0.05. Since there were no cases related to the immune factor in the sample, further clinical data are necessary in order to assess the online tool's performance for that factor.Conclusions: The online tool tends to present more false-positives than false-negatives, whereas the expert physician tends to present more false-negatives than false-positives. Therefore, the online tool and the doctor seem to complement each other. Finally, the obtained results suggest that the infertility online tool discussed herein might be a useful research and instructional tool.

  17. An online infertility clinical decision support system

    Directory of Open Access Journals (Sweden)

    Fabio Diniz de Souza

    2017-09-01

    Full Text Available Objective: To explore some possibilities of computer applications in medicine, and to discuss an online infertility clinical decision support system. Methods: Retrospective data were obtained from 52 couples, and then entered into the online tool. Both its results and the initial diagnoses obtained by the treating physicians were compared with the final diagnoses established by laparoscopy and other diagnostic tests (semen analysis, hormone analysis, endometrial biopsy, ultrasound and hysteroscopy. The initial hypothesis of the research was that the online tool’s output was statistically associated with the final diagnoses. In order to verify that hypothesis, a chi-square (氈2 test with Yates’ correction for continuity (P<0.05 was performed to verify if the online tool’s and the doctor’s diagnoses were statistically associated with the final diagnoses. Results: Four etiological factors were present in more than 50% of the couples (ovarian, tubal-peritoneal, uterine, and endometriosis. The statistical results confirmed the research hypothesis for eight out of the nine etiological factors (ovarian, tubal-peritoneal, uterine, cervical, male, vaginal, psychosomatic, and endometriosis; P<0.05. Since there were no cases related to the immune factor in the sample, further clinical data are necessary in order to assess the online tool’s performance for that factor. Conclusions: The online tool tends to present more false-positives than false negatives, whereas the expert physician tends to present more false-negatives than false-positives. Therefore, the online tool and the doctor seem to complement each other. Finally, the obtained results suggest that the infertility online tool discussed herein might be a useful research and instructional tool.

  18. Alternatives of ITER vacuum vessel support system

    International Nuclear Information System (INIS)

    Ohmori, Junji; Kitamura, Kazunori; Araki, Masanori; Ohno, Isamu; Shoji, Teruaki

    2002-07-01

    Optional designs of vacuum vessel (VV) support have been performed for the International Thermonuclear Experimental Reactor (ITER) to reduce stresses and buckling concern of the flexible plate structure in ITER-FDR. One of the optional designs is hanging type VV support concept that consists of top hanging supports at the top of VV and middle radial stoppers in the middle of outboard VV. The hanging supports are located at the toroidal field (TF) coil inboard top region (R∼5400 mm) using the narrow window space surrounded by a poloidal field coil (PF1) and TF coil. The radial stoppers are located inside TF coil cases in the TF coil outboard middle region (R∼9300 mm). The upper flange connection of the radial stoppers should slide in vertical direction to eliminate thermal stress produced by relative thermal displacement between VV wall and TF coil case. Both supports consist of flexible plates and are mounted on 18 locations in toroidal direction. The radial and toroidal reaction forces are shared with the hanging supports and the radial stoppers. However, the vertical force is sustained by only the hanging supports. The others are compressive type support concept that consists of nine VV supports located in alternate divertor port regions in toroidal direction. Two designs have been performed for the VV support concept. One is mounted on TF inter-coil structures (OIS) and the other is on cryostat ring. The compressive support on TF coil OIS is dependent on TF coil movement but that on cryostat is independent. In the optional designs, the bending stress due to the relative thermal displacement between TF coil and VV is classified to primary stress according to ASME Sec. III NF. The stress due to TF coil displacement is also considered as primary stress. The stress due to non-uniform temperature distribution of the flexible plate is classified to secondary stress. The preliminary structural assessments for the optional designs have been performed for all load

  19. Educational tool for modeling and simulation of a closed regenerative life support system

    Science.gov (United States)

    Arai, Tatsuya; Fanchiang, Christine; Aoki, Hirofumi; Newman, Dava J.

    For long term missions on the moon and Mars, regenerative life support systems emerge as a promising key technology for sustaining successful explorations with reduced re-supply logistics and cost. The purpose of this study was to create a simple model of a regenerative life support system which allows preliminary investigation of system responses. A simplified regenerative life support system was made with MATLAB Simulink ™. Mass flows in the system were simplified to carbon, water, oxygen and carbon dioxide. The subsystems included crew members, animals, a plant module, and a waste processor, which exchanged mass into and out of mass reservoirs. Preliminary numerical simulations were carried out to observe system responses. The simplified life support system model allowed preliminary investigation of the system response to perturbations such as increased or decreased number of crew members. The model is simple and flexible enough to add new components, and also possible to numerically predict non-linear subsystem functions and responses. Future work includes practical issues such as energy efficiency, air leakage, nutrition, and plant growth modeling. The model functions as an effective teaching tool about how a regenerative advanced life support system works.

  20. Breast cancer risk assessment and diagnosis model using fuzzy support vector machine based expert system

    Science.gov (United States)

    Dheeba, J.; Jaya, T.; Singh, N. Albert

    2017-09-01

    Classification of cancerous masses is a challenging task in many computerised detection systems. Cancerous masses are difficult to detect because these masses are obscured and subtle in mammograms. This paper investigates an intelligent classifier - fuzzy support vector machine (FSVM) applied to classify the tissues containing masses on mammograms for breast cancer diagnosis. The algorithm utilises texture features extracted using Laws texture energy measures and a FSVM to classify the suspicious masses. The new FSVM treats every feature as both normal and abnormal samples, but with different membership. By this way, the new FSVM have more generalisation ability to classify the masses in mammograms. The classifier analysed 219 clinical mammograms collected from breast cancer screening laboratory. The tests made on the real clinical mammograms shows that the proposed detection system has better discriminating power than the conventional support vector machine. With the best combination of FSVM and Laws texture features, the area under the Receiver operating characteristic curve reached .95, which corresponds to a sensitivity of 93.27% with a specificity of 87.17%. The results suggest that detecting masses using FSVM contribute to computer-aided detection of breast cancer and as a decision support system for radiologists.

  1. Dynamics of Mass Transfer in Wide Symbiotic Systems

    Science.gov (United States)

    de Val-Borro, Miguel; Karovska, M.; Sasselov, D.

    2010-01-01

    We investigate the formation of accretion disks around the secondary in detached systems consisting of an Asymptotic Giant Branch (AGB) star and a compact accreting companion as a function of mass loss rate and orbital parameters. In particular, we study winds from late-type stars that are gravitationally focused by a companion in a wide binary system using hydrodynamical simulations. For a typical slow and massive wind from an evolved star there is a stream flow between the stars with accretion rates of a few percent of the mass loss from the primary. Mass transfer through a focused wind is an important mechanism for a broad range of interacting binary systems and can explain the formation of Barium stars and other chemically peculiar stars.

  2. Dynamical limits on dark mass in the outer solar system

    International Nuclear Information System (INIS)

    Hogg, D.W.; Quinlan, G.D.; Tremaine, S.

    1991-01-01

    Simplified model solar systems with known observational errors are considered in conducting a dynamical search for dark mass and its minimum detectable amount, and in determining the significance of observed anomalies. The numerical analysis of the dynamical influence of dark mass on the orbits of outer planets and comets is presented in detail. Most conclusions presented are based on observations of the four giant planets where the observational errors in latitude and longitude are independent Gaussian variables with a standard deviation. Neptune's long orbital period cannot be predicted by modern ephemerides, and no evidence of dark mass is found in considering this planet. Studying the improvement in fit when observations are fitted to models that consider dark mass is found to be an efficient way to detect dark mass. Planet X must have a mass of more than about 10 times the minimum detectable mass to locate the hypothetical planet. It is suggested that the IRAS survey would have already located the Planet X if it is so massive and close that it dynamically influences the outer planets. Orbital residuals from comets are found to be more effective than those from planets in detecting the Kuiper belt. 35 refs

  3. Growth kinetics and growth mechanism of ultrahigh mass density carbon nanotube forests on conductive Ti/Cu supports.

    Science.gov (United States)

    Sugime, Hisashi; Esconjauregui, Santiago; D'Arsié, Lorenzo; Yang, Junwei; Makaryan, Taron; Robertson, John

    2014-09-10

    We evaluate the growth kinetics and growth mechanism of ultrahigh mass density carbon nanotube forests. They are synthesized by chemical vapor deposition at 450 °C using a conductive Ti/Cu support and Co-Mo catalyst system. We find that Mo stabilizes Co particles preventing lift off during the initial growth stage, thus promoting the growth of ultrahigh mass density nanotube forests by the base growth mechanism. The morphology of the forest gradually changes with growth time, mostly because of a structural change of the catalyst particles. After 100 min growth, toward the bottom of the forest, the area density decreases from ∼ 3-6 × 10(11) cm(-2) to ∼ 5 × 10(10) cm(-2) and the mass density decreases from 1.6 to 0.38 g cm(-3). We also observe part of catalyst particles detached and embedded within nanotubes. The progressive detachment of catalyst particles results in the depletion of the catalyst metals on the substrate surfaces. This is one of the crucial reasons for growth termination and may apply to other catalyst systems where the same features are observed. Using the packed forest morphology, we demonstrate patterned forest growth with a pitch of ∼ 300 nm and a line width of ∼ 150 nm. This is one of the smallest patterning of the carbon nanotube forests to date.

  4. Hybrid Life Support System Technology Demonstrations

    Science.gov (United States)

    Morrow, R. C.; Wetzel, J. P.; Richter, R. C.

    2018-02-01

    Demonstration of plant-based hybrid life support technologies in deep space will validate the function of these technologies for long duration missions, such as Mars transit, while providing dietary variety to improve habitability.

  5. Distributed System for Spaceflight Biomedical Support

    Data.gov (United States)

    National Aeronautics and Space Administration — Our project investigated whether a software platform could integrate as wide a variety of devices and data types as needed for spaceflight biomedical support. The...

  6. Apollo Soyuz Test Project Weights and Mass Properties Operational Management System

    Science.gov (United States)

    Collins, M. A., Jr.; Hischke, E. R.

    1975-01-01

    The Apollo Soyuz Test Project (ASTP) Weights and Mass Properties Operational Management System was established to assure a timely and authoritative method of acquiring, controlling, generating, and disseminating an official set of vehicle weights and mass properties data. This paper provides an overview of the system and its interaction with the various aspects of vehicle and component design, mission planning, hardware and software simulations and verification, and real-time mission support activities. The effect of vehicle configuration, design maturity, and consumables updates is discussed in the context of weight control.

  7. Space Launch System Vibration Analysis Support

    Science.gov (United States)

    Johnson, Katie

    2016-01-01

    The ultimate goal for my efforts during this internship was to help prepare for the Space Launch System (SLS) integrated modal test (IMT) with Rodney Rocha. In 2018, the Structural Engineering Loads and Dynamics Team will have 10 days to perform the IMT on the SLS Integrated Launch Vehicle. After that 10 day period, we will have about two months to analyze the test data and determine whether the integrated vehicle modes/frequencies are adequate for launching the vehicle. Because of the time constraints, NASA must have newly developed post-test analysis methods proven well and with technical confidence before testing. NASA civil servants along with help from rotational interns are working with novel techniques developed and applied external to Johnson Space Center (JSC) to uncover issues in applying this technique to much larger scales than ever before. We intend to use modal decoupling methods to separate the entangled vibrations coming from the SLS and its support structure during the IMT. This new approach is still under development. The primary goal of my internship was to learn the basics of structural dynamics and physical vibrations. I was able to accomplish this by working on two experimental test set ups, the Simple Beam and TAURUS-T, and by doing some light analytical and post-processing work. Within the Simple Beam project, my role involves changing the data acquisition system, reconfiguration of the test set up, transducer calibration, data collection, data file recovery, and post-processing analysis. Within the TAURUS-T project, my duties included cataloging and removing the 30+ triaxial accelerometers, coordinating the removal of the structure from the current rolling cart to a sturdy billet for further testing, preparing the accelerometers for remounting, accurately calibrating, mounting, and mapping of all accelerometer channels, and some testing. Hammer and shaker tests will be performed to easily visualize mode shapes at low frequencies. Short

  8. Desicion Support System For Natural Hazards

    Science.gov (United States)

    Vyazilov, E.

    2009-04-01

    recommendations should be reasonable. To resolve the above problems or to make them less significant it is necessary to develop decision support systems (DSS). DMs need not tables with initial data, analytical, forecasting and climatic information, but messages containing warnings on critical value accidence, information on probability of hazards, information on potential losses, and information on hazardous impacts and recommendations on decision making. DSS can do the following: take into account impacts on specific points and on the total area under consideration; allow for the effects of the environment on economic entities (objects) in any geographical region to be analyzed; distinguish impacts and changes caused both by different phenomena and by their combination; signal when objects are or can be in adverse environmental conditions, e.g. in the area affected by fog, storm, tropical cyclone or in the area where the probability of hazardous ice events is very high, etc. The main component of DSS is a knowledge base based on the following concept: if we know environmental conditions it is possible to predict potential impacts on the economy; if we know impacts it is possible to give a set of recommendations on how to prevent (reduce) losses or how to use natural resources most efficiently. Decision making criteria are safety of people and property, reduction of losses, increase of profit, materials saving, etc. Knowledge base is a set of rules formulated in a formalized way using if, that, else. If "Water level in S.-Petersburg >150 cm" that "To give out warning information "Hazards for building on coastal river Neva is possible" and recommendations "The valuable goods carry out in second floor" else "To switch another rule". To have a knowledge base in place it is necessary to: develop tools of identifying and getting knowledge from experts; arrange the information flow from available information systems (operational data, analyses, forecasts, climatic information) through

  9. A HOME-BASED MASSED PRACTICE SYSTEM FOR PEDIATRIC NEUROREHABILITATION

    Directory of Open Access Journals (Sweden)

    Yi-Ning Wu

    2013-11-01

    Full Text Available The objective of this paper is to introduce a novel low-cost human-computer interface (HCI system for home-based massed practice for children with upper limb impairment due to brain injury. Successful massed practice, a type of neurorehabilitation, may be of value for children with brain injury because it facilitates impaired limb use. Use of automated, home-based systems could provide a practical means for massed practice. However, the optimal strategy to deliver and monitor home-based massed practice is still unclear. We integrated motion sensor, video game, and HCI software technologies to create a useful home-based massed practice at targeted joints. The system records joint angle and number of movements using a low-cost custom hand-held sensor. The sensor acts as an input device to play video games. We demonstrated the system’s functionality and provided preliminary observations on usage by children with brain injury, including joint motion and muscle activation.

  10. ISABELLE magnet support and adjustment system

    International Nuclear Information System (INIS)

    Buchanan, V.; Kassner, D.; Polk, I.

    1979-01-01

    The ISABELLE superconducting is supported at the quarter points within a carbon steel vacuum vessel by four fiberglass straps. These are positioned at a small angle to the vertical so that contraction of both the magnet core and the suspension straps do not change the position of the magnet centerline. Two smaller fiberglass straps at each support provide horizontal position location. The fiberglass straps are fabricated of uniaxial epoxy fiberglass tape. Creep tests at room temperature and 1.3 times design load show no extension after one year and there was a factor of safety of 5 in breaking strength. An Engineering Test Model was constructed and cycled to 5 0 K. Heat leak for the eight straps was less than 0.5 W and position stability was within +-0.005''. The vacuum vessel is vertically positioned by means of three jack screws with sliding pads and spherical washers between the top of the jacks and the support boxes. Longitudinal and lateral positioning is done by three horizontal screws at each support box. Three shim plates on the top of the support boxes are used to set the magnetic plane and sockets in two of these are used to set the lateral plane

  11. Mass transfer dynamics in double degenerate binary systems

    International Nuclear Information System (INIS)

    Dan, M; Rosswog, S; Brueggen, M

    2009-01-01

    We present a numerical study of the mass transfer dynamics prior to the gravitational wave-driven merger of a double white dwarf system. Recently, there has been some discussion about the dynamics of these last stages, different methods seemed to provide qualitatively different results. While earlier SPH simulations indicated a very quick disruption of the binary on roughly the orbital time scale, more recent grid-based calculations find long-lived mass transfer for many orbital periods. Here we demonstrate how sensitive the dynamics of this last stage is to the exact initial conditions. We show that, after a careful preparation of the initial conditions, the reportedly short-lived systems undergo mass transfer for many dozens of orbits. The reported numbers of orbits are resolution-biased and therefore represent only lower limits to what is realized in nature. Nevertheless, the study shows convincingly the convergence of different methods to very similar results.

  12. Resonance ionization mass spectrometry system for measurement of environmental samples

    International Nuclear Information System (INIS)

    Pibida, L.; McMahon, C.A.; Noertershaeuser, W.; Bushaw, B.A.

    2002-01-01

    A resonance ionization mass spectrometry (RIMS) system has been developed at the National Institute of Standards and Technology (NIST) for sensitive and selective determination of radio-cesium in the environment. The overall efficiency was determined to be 4x10-7 with a combined (laser and mass spectrometer) selectivity of 108 for both 135Cs and 137Cs with respect to 133Cs. RIMS isotopic ratio measurements of 135Cs/ 137Cs were performed on a nuclear fuel burn-up sample and compared to measurements on a similar system at Pacific Northwest National Laboratory (PNNL) and to conventional thermal ionization mass spectrometry (TIMS). Results of preliminary RIMS investigations on a freshwater lake sediment sample are also discussed

  13. Reexamining Operating System Support for Database Management

    OpenAIRE

    Vasil, Tim

    2003-01-01

    In 1981, Michael Stonebraker [21] observed that database management systems written for commodity operating systems could not effectively take advantage of key operating system services, such as buffer pool management and process scheduling, due to expensive overhead and lack of customizability. The “not quite right” fit between these kernel services and the demands of database systems forced database designers to work around such limitations or re-implement some kernel functionality in user ...

  14. Maintenance Decision Support System, Phase III

    Science.gov (United States)

    2017-09-01

    The main goal of the project was to address barriers that limit NDOTs ability to implement MDSS and MMS systems. The four project tasks included: Task 1: Develop system for tracking sand and/or deicing material usage: A system that tracks where and w...

  15. Safety implications of electronic driving support systems : an orientation.

    NARCIS (Netherlands)

    Gundy, C.M. Steyvers, F.J.J.M. & Kaptein, N.A.

    1995-01-01

    This report focuses on traffic safety aspects of driving support systems. The report consists of two parts. First of all, the report discusses a number of topics, relevant for the implementation and evaluation of driving support systems. These topics include: (1) safety research into driving support

  16. BIM Anatomy II: Standardisation Needs & Support Systems

    OpenAIRE

    Hooper, Martin

    2015-01-01

    This thesis presents the results of an investigation into BIM standardisation needs and procedural supporting mechanisms that may enable design, construction and operating (DCO) organisations to advance their deployment of Building Information Modelling (BIM) technology, and improve construction project outcomes. To achieve sustainable development requires effective information management. Building Information Modelling is of strategic importance for the development of effi...

  17. Mass production system and technology of NbTi superconductors

    International Nuclear Information System (INIS)

    Fukutsuka, Toshiro; Monju, Yoshiyuki; Tatara, Isamu; Noguchi, Masataka; Yokochi, Katsuhiro; Matsubara, Mitsuharu.

    1984-01-01

    A mass production system for NbTi superconductors is described, involving vacuum arc melting of the alloys, hot hydrostatic extrusion of the composite billets and special drawing and stranding techniques for the rods and wires. The qualities required for superconducting wires are assured by a variety of instrument measurement and inspection techniques drawn from accumulated cryogenic experiences. (author)

  18. A spatial decision support system for pipe-break susceptibility ...

    African Journals Online (AJOL)

    lying properties. Existing decision support systems available in the field of water distribution system maintenance mainly focus on leak detection and pipe rehabilitation/replacement strategies. These existing systems, however, do not address the ...

  19. SOCOM Training and Rehearsal System (STRS) Process Improvement and Decision Support System (DSS) Development

    National Research Council Canada - National Science Library

    Crossland, Neal; Broussard, Steve

    2005-01-01

    ...) Process Improvement and Decision Support System (DSS) Development. Discussion sequence is: Why the study? Objectives; Areas of inquiry; Study products; Observations; Recommendations; Decision Support System.

  20. Closure of Regenerative Life Support Systems: Results of the Lunar-Mars Life Support Test Project

    Science.gov (United States)

    Barta, Daniel; Henninger, D.; Edeen, M.; Lewis, J.; Smth, F.; Verostko, C.

    2006-01-01

    Future long duration human exploration missions away from Earth will require closed-loop regenerative life support systems to reduce launch mass, reduce dependency on resupply and increase the level of mission self sufficiency. Such systems may be based on the integration of biological and physiocochemical processes to produce potable water, breathable atmosphere and nutritious food from metabolic and other mission wastes. Over the period 1995 to 1998 a series of ground-based tests were conducted at the National Aeronautics and Space Administration, Johnson Space Center, to evaluate the performance of advanced closed-loop life support technologies with real human metabolic and hygiene loads. Named the Lunar-Mars Life Support Test Project (LMLSTP), four integrated human tests were conducted with increasing duration, complexity and closure. The first test, LMLSTP Phase I, was designed to demonstrate the ability of higher plants to revitalize cabin atmosphere. A single crew member spent 15 days within an atmospherically closed chamber containing 11.2 square meters of actively growing wheat. Atmospheric carbon dioxide and oxygen levels were maintained by control of the rate of photosynthesis through manipulation of light intensity or the availability of carbon dioxide and included integrated physicochemical systems. During the second and third tests, LMLSTP Phases II & IIa, four crew members spent 30 days and 60 days, respectively, in a larger sealed chamber. Advanced physicochemical life support hardware was used to regenerate the atmosphere and produce potable water from wastewater. Air revitalization was accomplished by using a molecular sieve and a Sabatier processor for carbon dioxide absorption and reduction, respectively, with oxygen generation performed by water hydrolysis. Production of potable water from wastewater included urine treatment (vapor compression distillation), primary treatment (ultrafiltration/reverse osmosis and multi-filtration) and post

  1. The value of participatory development to support antimicrobial stewardship with a clinical decision support system

    NARCIS (Netherlands)

    Beerlage-de Jong, Nienke; Wentzel, Jobke; Hendrix, Ron; van Gemert-Pijnen, Lisette

    2017-01-01

    Background: Current clinical decision support systems (CDSSs) for antimicrobial stewardship programs (ASPs) are guideline- or expert-driven. They are focused on (clinical) content, not on supporting real-time workflow. Thus, CDSSs fail to optimally support prudent antimicrobial prescribing in daily

  2. The value of participatory development to support antimicrobial stewardship with a clinical decision support system

    NARCIS (Netherlands)

    Beerlage-de Jong, Nienke; Wentzel, M.J.; Hendrix, Ron; van Gemert-Pijnen, Julia E.W.C.

    Background Current clinical decision support systems (CDSSs) for antimicrobial stewardship programs (ASPs) are guideline- or expert-driven. They are focused on (clinical) content, not on supporting real-time workflow. Thus, CDSSs fail to optimally support prudent antimicrobial prescribing in daily

  3. A diagnosis system for plant operation support

    International Nuclear Information System (INIS)

    Sundheimer, S.; Lorenzetti, J.; Lamana, C.

    1990-01-01

    The present article describes a diagnosis system for abnormal power plant events. The design is modular and uses a shell written in C languaje and a knowledge basis that can be changed easily. At present the system works with a reduced knowledge for primary and secondery leacks. The mitigation procedure is being written with the help of operation staff

  4. Design breakthrough in roof support systems

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    The technical experts of the Mining Services sections of Monier Resources Australia have designed and developed a superior roof system for installation in underground mines. The Monier Big Bag Grout Chock is a patented system utilising pumped grout. The advantages of grout chocks over conventional timber chocks are many and varied.

  5. Expert system support and juridical quality

    NARCIS (Netherlands)

    Groothuis, Marga M.; Svensson, Jorgen S.; Breuker, J.; Leenes, R.E.; Winkels, R.

    2000-01-01

    This article discusses the use of expert systems as a means of achieving juridical quality within administrative organisations. Do these systems really improve the quality of decision making and provide the desired guarantees with respect to the correct treatment of clients?

  6. An ATLAS event with a high mass dijet system

    CERN Multimedia

    ATLAS, Experiment

    2014-01-01

    Event with a high mass dijet system: the invariant mass of the two highest-pT jets is 2.55 TeV. The highest pT jet has a pT of 420 GeV, and an eta of -1.51, the second leading jet has pT of 320 GeV and an eta of 2.32. Jet momenta are calibrated according to the "EM+JES" scheme. No other jets are found with pT above 20 GeV. Event collected on 4 July 2010.

  7. High-performance mass storage system for workstations

    Science.gov (United States)

    Chiang, T.; Tang, Y.; Gupta, L.; Cooperman, S.

    1993-01-01

    Reduced Instruction Set Computer (RISC) workstations and Personnel Computers (PC) are very popular tools for office automation, command and control, scientific analysis, database management, and many other applications. However, when using Input/Output (I/O) intensive applications, the RISC workstations and PC's are often overburdened with the tasks of collecting, staging, storing, and distributing data. Also, by using standard high-performance peripherals and storage devices, the I/O function can still be a common bottleneck process. Therefore, the high-performance mass storage system, developed by Loral AeroSys' Independent Research and Development (IR&D) engineers, can offload a RISC workstation of I/O related functions and provide high-performance I/O functions and external interfaces. The high-performance mass storage system has the capabilities to ingest high-speed real-time data, perform signal or image processing, and stage, archive, and distribute the data. This mass storage system uses a hierarchical storage structure, thus reducing the total data storage cost, while maintaining high-I/O performance. The high-performance mass storage system is a network of low-cost parallel processors and storage devices. The nodes in the network have special I/O functions such as: SCSI controller, Ethernet controller, gateway controller, RS232 controller, IEEE488 controller, and digital/analog converter. The nodes are interconnected through high-speed direct memory access links to form a network. The topology of the network is easily reconfigurable to maximize system throughput for various applications. This high-performance mass storage system takes advantage of a 'busless' architecture for maximum expandability. The mass storage system consists of magnetic disks, a WORM optical disk jukebox, and an 8mm helical scan tape to form a hierarchical storage structure. Commonly used files are kept in the magnetic disk for fast retrieval. The optical disks are used as archive

  8. Optimization of System Maturity and Equivalent System Mass for Exploration Systems Development Planning

    Science.gov (United States)

    Magnaye, Romulo; Tan, Weiping; Ramirez-Marquez, Jose; Sauser, Bruce

    2010-01-01

    The Exploration Systems Mission Directorate of the National Aeronautics and Space Administration (NASA) is currently pursuing the development of the next generation of human spacecraft and exploration systems throughout the Constellation Program. This includes, among others, habitation technologies for supporting lunar and Mars exploration. The key to these systems is the Exploration Life Support (ELS) system that composes several technology development projects related to atmosphere revitalization, water recovery, waste management and habitation. The proper functioning of these technologies is meant to produce sufficient and balanced resources of water, air, and food to maintain a safe and comfortable environment for long-term human habitation and exploration of space.

  9. Overview of Actuated Arm Support Systems and Their Applications

    Directory of Open Access Journals (Sweden)

    E.A. Lomonova

    2013-10-01

    Full Text Available Arm support systems provide support throughout daily tasks, training or in an industrial environment. During the last decades a large diversity of actuated arm support systems have been developed. To analyze the actuation principles in these systems, an overview of actuated arm support systems is provided. This overview visualizes the current trends on research and development of these support systems and distinguishes three categories. These categories depend mainly on the functional status of the user environment, which defines the specifications. Therefore, the actuated arm support systems are classified according to their user environment, namely: ambulatory, rehabilitation and industrial. Furthermore, three main actuation principles and three mechanical construction principles have been identified.

  10. Quality education as quality system support

    International Nuclear Information System (INIS)

    Crnoshia, L.; Gavriloska, M.; Denkovska, J.; Dimitrovski, A.

    1999-01-01

    Within the last ten years we are witnesses of the political and economical system transformation, that imposed the need for changing the way of thinking and work planning. The quality has become the imperative of working and a precondition for survival in the market. Solving the quality problems seeks planned and systematic approach that supposed appropriate personnel with adequate knowledge in the field of quality management and implementation of the quality system. Having in mind the need for documented quality system and quality management OKTA, has already started with personnel educational process for quality as a precondition for successful establishment of quality system. In this paper we present quality education approach and manner of its realization in OKTA Crude Oil Refinery - Skopje, Macedonia. (Original)

  11. E3 Travel & Mission Support System

    Data.gov (United States)

    US Agency for International Development — ETRAMS is a travel data collection system developed by the CKM team in E3 that collects information on both the basic details of an employee's trips (destination,...

  12. Control Systems Cyber Security Standards Support Activities

    Energy Technology Data Exchange (ETDEWEB)

    Robert Evans

    2009-01-01

    The Department of Homeland Security’s Control Systems Security Program (CSSP) is working with industry to secure critical infrastructure sectors from cyber intrusions that could compromise control systems. This document describes CSSP’s current activities with industry organizations in developing cyber security standards for control systems. In addition, it summarizes the standards work being conducted by organizations within the sector and provides a brief listing of sector meetings and conferences that might be of interest for each sector. Control systems cyber security standards are part of a rapidly changing environment. The participation of CSSP in the development effort for these standards has provided consistency in the technical content of the standards while ensuring that information developed by CSSP is included.

  13. Mass independent kinetic energy reducing inlet system for vacuum environment

    Science.gov (United States)

    Reilly, Peter T. A. [Knoxville, TN

    2010-12-14

    A particle inlet system comprises a first chamber having a limiting orifice for an incoming gas stream and a micrometer controlled expansion slit. Lateral components of the momentum of the particles are substantially cancelled due to symmetry of the configuration once the laminar flow converges at the expansion slit. The particles and flow into a second chamber, which is maintained at a lower pressure than the first chamber, and then moves into a third chamber including multipole guides for electromagnetically confining the particle. The vertical momentum of the particles descending through the center of the third chamber is minimized as an upward stream of gases reduces the downward momentum of the particles. The translational kinetic energy of the particles is near-zero irrespective of the mass of the particles at an exit opening of the third chamber, which may be advantageously employed to provide enhanced mass resolution in mass spectrometry.

  14. Collapse of white dwarfs in low mass binary systems

    International Nuclear Information System (INIS)

    Isern, J.; Canal, R.; Garcia-Berro, E.; Hernanz, M.; Labay, J.

    1987-01-01

    Low-mass binary X-ray sources and cataclysmic variables are composed of a compact star plus a non-degenerate star with a mass of the order of 1 M sun . In the first case, the degenerate star is a neutron star. In the second case, the star is a white dwarf. The similarities of both systems are so high that it is worthwhile to look for the possibility of obtaining a neutron star from the collapse of a white dwarf that accretes matter. The present work shows that massive, initially cold white dwarfs can collapse non-explosively if they accrete mass at a rate greater than 1.0E-7 M sun per year. (Author)

  15. Correlation of the Rock Mass Rating (RMR) System with the Unified Soil Classification System (USCS): Introduction of the Weak Rock Mass Rating System (W-RMR)

    Science.gov (United States)

    Warren, Sean N.; Kallu, Raj R.; Barnard, Chase K.

    2016-11-01

    Underground gold mines in Nevada are exploiting increasingly deeper ore bodies comprised of weak to very weak rock masses. The Rock Mass Rating (RMR) classification system is widely used at underground gold mines in Nevada and is applicable in fair to good-quality rock masses, but is difficult to apply and loses reliability in very weak rock mass to soil-like material. Because very weak rock masses are transition materials that border engineering rock mass and soil classification systems, soil classification may sometimes be easier and more appropriate to provide insight into material behavior and properties. The Unified Soil Classification System (USCS) is the most likely choice for the classification of very weak rock mass to soil-like material because of its accepted use in tunnel engineering projects and its ability to predict soil-like material behavior underground. A correlation between the RMR and USCS systems was developed by comparing underground geotechnical RMR mapping to laboratory testing of bulk samples from the same locations, thereby assigning a numeric RMR value to the USCS classification that can be used in spreadsheet calculations and geostatistical analyses. The geotechnical classification system presented in this paper including a USCS-RMR correlation, RMR rating equations, and the Geo-Pick Strike Index is collectively introduced as the Weak Rock Mass Rating System (W-RMR). It is the authors' hope that this system will aid in the classification of weak rock masses and more usable design tools based on the RMR system. More broadly, the RMR-USCS correlation and the W-RMR system help define the transition between engineering soil and rock mass classification systems and may provide insight for geotechnical design in very weak rock masses.

  16. Nuclear-fueled circulatory support systems

    Energy Technology Data Exchange (ETDEWEB)

    Norman, J C [Texas Heart Inst. (USA)

    1975-08-01

    Experiments on calves using two types of systems for nuclear left ventricular assist pumps are described. These two systems use a nuclear heat source containing 120 g, 1600 Ci Pu-238 in the form of plutonium oxide. The heat source for the first system is the tidal regenerator engine with no valve or seal and is controlled using a hall effect displacement sensor. The second left ventricular assist system uses heat generated by nuclear decay for producing high gas pressure which is converted into a high hydraulic pressure for pumping. The engine efficiency amounts to 7 to 16%, and the measurement value of the pump efficiency obtained is 85%. How these two systems are synchronized with the left ventricle of vital body is described. IN a transplant experiment for a short period (175 hours) in the initial stage, the possibility of the present method was demonstrated. A long-term performance experiment and improvement of the systems are anticipated. However, there still remain many problems, such as improvement of efficiency, reliability, and performance and diminution of the size.

  17. MIT-Skywalker: considerations on the Design of a Body Weight Support System.

    Science.gov (United States)

    Gonçalves, Rogério Sales; Krebs, Hermano Igo

    2017-09-06

    To provide body weight support during walking and balance training, one can employ two distinct embodiments: support through a harness hanging from an overhead system or support through a saddle/seat type. This paper presents a comparison of these two approaches. Ultimately, this comparison determined our selection of the body weight support system employed in the MIT-Skywalker, a robotic device developed for the rehabilitation/habilitation of gait and balance after a neurological injury. Here we will summarize our results with eight healthy subjects walking on the treadmill without any support, with 30% unloading supported by a harness hanging from an overhead system, and with a saddle/seat-like support system. We compared the center of mass as well as vertical and mediolateral trunk displacements across different walking speeds and support. The bicycle/saddle system had the highest values for the mediolateral inclination, while the overhead harness body weight support showed the lowest values at all speeds. The differences were statistically significant. We selected the bicycle/saddle system for the MIT-Skywalker. It allows faster don-and-doff, better centers the patient to the split treadmill, and allows all forms of training. The overhead harness body weight support might be adequate for rhythmic walking training but limits any potential for balance training.

  18. Fault Detection for Shipboard Monitoring and Decision Support Systems

    DEFF Research Database (Denmark)

    Lajic, Zoran; Nielsen, Ulrik Dam

    2009-01-01

    In this paper a basic idea of a fault-tolerant monitoring and decision support system will be explained. Fault detection is an important part of the fault-tolerant design for in-service monitoring and decision support systems for ships. In the paper, a virtual example of fault detection...... will be presented for a containership with a real decision support system onboard. All possible faults can be simulated and detected using residuals and the generalized likelihood ratio (GLR) algorithm....

  19. Optimal support arrangement of piping systems using genetic algorithm

    International Nuclear Information System (INIS)

    Chiba, T.; Okado, S.; Fujii, I.; Itami, K.

    1996-01-01

    The support arrangement is one of the important factors in the design of piping systems. Much time is required to decide the arrangement of the supports. The authors applied a genetic algorithm to find the optimum support arrangement for piping systems. Examples are provided to illustrate the effectiveness of the genetic algorithm. Good results are obtained when applying the genetic algorithm to the actual designing of the piping system

  20. A semilinear parabolic–elliptic chemotaxis system with critical mass in any space dimension

    International Nuclear Information System (INIS)

    Montaru, Alexandre

    2013-01-01

    We study radial solutions in a ball of R N of a semilinear, parabolic–elliptic Patlak–Keller–Segel system with a nonlinear sensitivity involving a critical power. For N = 2, the latter reduces to the classical ‘linear’ model, well known for its critical mass 8π. We show that a critical mass phenomenon also occurs for N ⩾ 3, but with a strongly different qualitative behaviour. More precisely, if the total mass of cells is smaller or equal to the critical mass M-bar , then the cell density converges to a regular steady state that is supported strictly inside the ball as time goes to infinity. In the case of the critical mass, this result is nontrivial since there exists a continuum of stationary solutions and is moreover in sharp contrast with the case N = 2 where infinite-time blow-up occurs. If the total mass of cells is larger than M-bar , then all radial solutions blow up in finite time. This actually follows from the existence (unlike for N = 2) of a family of self-similar, blowing-up solutions that are supported strictly inside the ball. (paper)

  1. A Support Analysis Framework for mass movement damage assessment: applications to case studies in Calabria (Italy

    Directory of Open Access Journals (Sweden)

    O. Petrucci

    2009-03-01

    Full Text Available The analysis of data describing damage caused by mass movements in Calabria (Italy allowed the organisation of the Support Analysis Framework (SAF, a spreadsheet that converts damage descriptions into numerical indices expressing direct, indirect, and intangible damage.

    The SAF assesses damage indices of past mass movements and the potential outcomes of dormant phenomena re-activations. It is based on the effects on damaged elements and is independent of both physical and geometric phenomenon characteristics.

    SAF sections that assess direct damage encompass several lines, each describing an element characterised by a value fixed on a relative arbitrary scale. The levels of loss are classified as: L4: complete; L3: high; L2: medium; or L1: low. For a generic line l, the SAF multiplies the value of a damaged element by its level of loss, obtaining dl, the contribution of the line to the damage.

    Indirect damage is appraised by two sections accounting for: (a actions aiming to overcome emergency situations and (b actions aiming to restore pre-movement conditions. The level of loss depends on the number of people involved (a or the cost of actions (b.

    For intangible damage, the level of loss depends on the number of people involved.

    We examined three phenomena, assessing damage using the SAF and SAFL, customised versions of SAF based on the elements actually present in the analysed municipalities that consider the values of elements in the community framework. We show that in less populated, inland, and affluent municipalities, the impact of mass movements is greater than in coastal areas.

    The SAF can be useful to sort groups of phenomena according to their probable future damage, supplying results significant either for insurance companies or for local authorities involved in both disaster management and planning of defensive measures.

  2. Neutron star mass limit at 2M{sub ⊙} supports the existence of a CEP

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez-Castillo, D. [JINR Dubna, Bogoliubov Laboratory of Theoretical Physics, Dubna (Russian Federation); Benic, S. [University of Zagreb, Department of Physics, Zagreb (Croatia); Blaschke, D. [JINR Dubna, Bogoliubov Laboratory of Theoretical Physics, Dubna (Russian Federation); National Research Nuclear University (MEPhI), Moscow (Russian Federation); University of Wroclaw, Institute of Theoretical Physics, Wroclaw (Poland); Han, Sophia [University of Tennessee, Department of Physics and Astronomy, Knoxville, TN (United States); Oak Ridge National Laboratory, Physics Division, Oak Ridge, TN (United States); Typel, S. [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany)

    2016-08-15

    We point out that the very existence of a ''horizontal branch'' in the mass-radius characteristics for neutron stars indicates a strong first-order phase transition and thus supports the existence of a critical endpoint (CEP) of first-order phase transitions in the QCD phase diagram. This branch would sample a sequence of hybrid stars with quark matter core, leading to the endpoint of stable compact star configurations with the highest possible baryon densities. Since we know of the existence of compact stars with 2M{sub ⊙}, this hypothetical branch has to lie in the vicinity of this mass value, if it exists. We report here a correlation between the maximal radius of the horizontal branch and the pressure at the onset of hadron-to-quark matter phase transition, which is likely to be a universal quantity of utmost relevance to the upcoming experiments with heavy-ion collisions at NICA and FAIR. (orig.)

  3. A maintenance support system with document handling capability

    International Nuclear Information System (INIS)

    Fukumoto, A.; Tsumura, K.; Fujii, M.; Tai, I.; Makimo, M.; Watanabe, T.

    1990-01-01

    An operation and maintenance support system, called 'Advanced Man-Machine System for Nuclear Power Plants' (MMS-NPP) is under development with the support of the Japanese Government. Taking full advantage of Artificial Intelligence technology, the system aims to enhance the capability of already developed 'Computerized Operator Support System (COSS)' and gives wider and more advanced support for operation and maintenance. With a brief overview of MMS-NPP, this paper describes a support system for plant patrol and equipment inspection. The system gives guidance for plant patrol and for equipment inspection and provides easy access to plant drawings and documents. A unique knowledge acquisition method, utilizing image processing technology, was proposed in building the system

  4. Neck Kinematics and Electromyography While Wearing Head Supported Mass During Running.

    Science.gov (United States)

    Hanks, Matthew M; Sefton, JoEllen M; Oliver, Gretchen D

    2018-01-01

    Advanced combat helmets (ACH) coupled with night-vision goggles (NVG) are required for tactical athletes during training and service. Head and neck injuries due to head supported mass (HSM) are a common occurrence in military personnel. The current study aimed to investigate the effects of HSM on neck muscle fatigue that may lead to chronic stress and injury of the head and neck. Subjects wore an ACH and were affixed with electromagnetic sensors to obtain kinematic data, as well as EMG electrodes to obtain muscle activations of bilateral sternocleidomastoid, upper trapezius, and paraspinal muscles while running on a treadmill. Subjects performed a 2-min warmup at a walking pace, a 5-min warmup jog, running at a pace equal to 90% maximum heart rate until absolute fatigue, and lastly a 2-min cooldown at a walking pace. Kinematic and EMG data were collected over each 2-min interval. Days later, the same subjects wore the same ACH in addition to the NVG and performed the same protocol as the first session. This study showed significant differences in muscle activation of the right upper trapezius [F(1,31) = 10.100] and both sternocleidomastoid [F(1,31) = 12.280] muscles from pre-fatigue to absolute fatigue. There were no significant differences noted in the kinematic variables. This study suggests that HSM can fatigue bilateral neck flexors and rotators, as well as fatigue the neck extensors and rotators on the contralateral side of the mounted NVG.Hanks MM, Sefton JM, Oliver GD. Neck kinematics and electromyography while wearing head supported mass during running. Aerosp Med Hum Perform. 2018; 89(1):9-13.

  5. Social Network Supported Process Recommender System

    Directory of Open Access Journals (Sweden)

    Yanming Ye

    2014-01-01

    Full Text Available Process recommendation technologies have gained more and more attention in the field of intelligent business process modeling to assist the process modeling. However, most of the existing technologies only use the process structure analysis and do not take the social features of processes into account, while the process modeling is complex and comprehensive in most situations. This paper studies the feasibility of social network research technologies on process recommendation and builds a social network system of processes based on the features similarities. Then, three process matching degree measurements are presented and the system implementation is discussed subsequently. Finally, experimental evaluations and future works are introduced.

  6. Social network supported process recommender system.

    Science.gov (United States)

    Ye, Yanming; Yin, Jianwei; Xu, Yueshen

    2014-01-01

    Process recommendation technologies have gained more and more attention in the field of intelligent business process modeling to assist the process modeling. However, most of the existing technologies only use the process structure analysis and do not take the social features of processes into account, while the process modeling is complex and comprehensive in most situations. This paper studies the feasibility of social network research technologies on process recommendation and builds a social network system of processes based on the features similarities. Then, three process matching degree measurements are presented and the system implementation is discussed subsequently. Finally, experimental evaluations and future works are introduced.

  7. Architecture and life support systems for a rotating space habitat

    Science.gov (United States)

    Misra, Gaurav

    Life Support Systems are critical to sustain human habitation of space over long time periods. As orbiting space habitats become operational in the future, support systems such as atmo-sphere, food, water etc. will play a very pivotal role in sustaining life. To design a long-duration space habitat, it's important to consider the full gamut of human experience of the environment. Long-term viability depends on much more than just the structural or life support efficiency. A space habitat isn't just a machine; it's a life experience. To be viable, it needs to keep the inhabitants satisfied with their condition. This paper provides conceptual research on several key factors that influence the growth and sustainability of humans in a space habitat. Apart from the main life support system parameters, the architecture (both interior and exterior) of the habitat will play a crucial role in influencing the liveability in the space habitat. In order to ensure the best possible liveability for the inhabitants, a truncated (half cut) torus is proposed as the shape of the habitat. This structure rotating at an optimum rpm will en-sure 1g pseudo gravity to the inhabitants. The truncated torus design has several advantages over other proposed shapes such as a cylinder or a sphere. The design provides minimal grav-ity variation (delta g) in the living area, since its flat outer pole ensures a constant gravity. The design is superior in economy of structural and atmospheric mass. Interior architecture of the habitat addresses the total built environment, drawing from diverse disciplines includ-ing physiology, psychology, and sociology. Furthermore, factors such as line of sight, natural sunlight and overhead clearance have been discussed in the interior architecture. Substantial radiation shielding is also required in order to prevent harmful cosmic radiations and solar flares from causing damage to inhabitants. Regolith shielding of 10 tons per meter square is proposed for the

  8. Stability design considerations for mirror support systems in ICF lasers

    International Nuclear Information System (INIS)

    Tietbohl, G.L.; Sommer, S.C.

    1996-10-01

    Some of the major components of laser systems used for Inertial Confinement Fusion (ICF) are the large aperture mirrors which direct the path of the laser. These mirrors are typically supported by systems which consist of mirror mounts, mirror enclosures, superstructures, and foundations. Stability design considerations for the support systems of large aperture mirrors have been developed based on the experience of designing and evaluating similar systems at the Lawrence Livermore National Laboratory (LLNL). Examples of the systems developed at LLNL include Nova, the Petawatt laser, Beamlet, and the National Ignition Facility (NIF). The structural design of support systems of large aperture mirrors has typically been controlled by stability considerations in order for the large laser system to meet its performance requirements for alignment and positioning. This paper will discuss the influence of stability considerations and will provide guidance on the structural design and evaluation of mirror support systems in ICF lasers so that this information can be used on similar systems

  9. Saponification reaction system: a detailed mass transfer coefficient determination.

    Science.gov (United States)

    Pečar, Darja; Goršek, Andreja

    2015-01-01

    The saponification of an aromatic ester with an aqueous sodium hydroxide was studied within a heterogeneous reaction medium in order to determine the overall kinetics of the selected system. The extended thermo-kinetic model was developed compared to the previously used simple one. The reaction rate within a heterogeneous liquid-liquid system incorporates a chemical kinetics term as well as mass transfer between both phases. Chemical rate constant was obtained from experiments within a homogeneous medium, whilst the mass-transfer coefficient was determined separately. The measured thermal profiles were then the bases for determining the overall reaction-rate. This study presents the development of an extended kinetic model for considering mass transfer regarding the saponification of ethyl benzoate with sodium hydroxide within a heterogeneous reaction medium. The time-dependences are presented for the mass transfer coefficient and the interfacial areas at different heterogeneous stages and temperatures. The results indicated an important role of reliable kinetic model, as significant difference in k(L)a product was obtained with extended and simple approach.

  10. Supporting the Architecting Process of Adaptive Systems

    NARCIS (Netherlands)

    Komoto, H.; Hamberg, R.; Tomiyama, T.

    2013-01-01

    Full flexible use of inkjet printhead units in printing systems requires consistent generation of drops with any given volume and velocity at any moment and place desired. True drop-on-demand is currently hampered by physical phenomena in the printhead. These are residual vibrations and crosstalk

  11. Supporting Continuous Improvement in California's Education System

    Science.gov (United States)

    Darling-Hammond, Linda; Plank, David N.

    2015-01-01

    California's new accountability system originated in the radical decentralization of power and authority from Sacramento to local schools and their communities brought about by the Legislature's adoption of the Local Control Funding Formula (LCFF) in 2013. Under California's previous accountability policies and the federal "No Child Left…

  12. Statistical modeling to support power system planning

    Science.gov (United States)

    Staid, Andrea

    This dissertation focuses on data-analytic approaches that improve our understanding of power system applications to promote better decision-making. It tackles issues of risk analysis, uncertainty management, resource estimation, and the impacts of climate change. Tools of data mining and statistical modeling are used to bring new insight to a variety of complex problems facing today's power system. The overarching goal of this research is to improve the understanding of the power system risk environment for improved operation, investment, and planning decisions. The first chapter introduces some challenges faced in planning for a sustainable power system. Chapter 2 analyzes the driving factors behind the disparity in wind energy investments among states with a goal of determining the impact that state-level policies have on incentivizing wind energy. Findings show that policy differences do not explain the disparities; physical and geographical factors are more important. Chapter 3 extends conventional wind forecasting to a risk-based focus of predicting maximum wind speeds, which are dangerous for offshore operations. Statistical models are presented that issue probabilistic predictions for the highest wind speed expected in a three-hour interval. These models achieve a high degree of accuracy and their use can improve safety and reliability in practice. Chapter 4 examines the challenges of wind power estimation for onshore wind farms. Several methods for wind power resource assessment are compared, and the weaknesses of the Jensen model are demonstrated. For two onshore farms, statistical models outperform other methods, even when very little information is known about the wind farm. Lastly, chapter 5 focuses on the power system more broadly in the context of the risks expected from tropical cyclones in a changing climate. Risks to U.S. power system infrastructure are simulated under different scenarios of tropical cyclone behavior that may result from climate

  13. EPICS: operating system independent device/driver support

    International Nuclear Information System (INIS)

    Kraimer, M.R.

    2003-01-01

    Originally EPICS input/output controllers (IOCs) were only supported on VME-based systems running the vxWorks operating system. Now IOCs are supported on many systems: vxWorks, RTEMS, Solaris, HPUX, Linux, WIN32, and Darwin. A challenge is to provide operating-system-independent device and driver support. This paper presents some techniques for providing such support. EPICS (Experimental Physics and Industrial Control System) is a set of software tools, libraries, and applications developed collaboratively and used worldwide to create distributed, real-time control systems for scientific instruments such as particle accelerators, telescopes, and other large scientific experiments. An important component of all EPICS-based control systems is a collection of input/output controllers (IOCs). An IOC has three primary components: (1) a real-time database; (2) channel access, which provides network access to the database; and (3) device/driver support for interfacing to equipment. This paper describes some projects related to providing device/driver support on non-vxWorks systems. In order to support IOCs on platforms other than vxWorks, operating-system-independent (OSI) application program interfaces (APIs) were defined for threads, semaphores, timers, etc. Providing support for a new platform consists of providing an operating-system-dependent implementation of the OSI APIs.

  14. Bidirectional Frontoparietal Oscillatory Systems Support Working Memory.

    Science.gov (United States)

    Johnson, Elizabeth L; Dewar, Callum D; Solbakk, Anne-Kristin; Endestad, Tor; Meling, Torstein R; Knight, Robert T

    2017-06-19

    The ability to represent and select information in working memory provides the neurobiological infrastructure for human cognition. For 80 years, dominant views of working memory have focused on the key role of prefrontal cortex (PFC) [1-8]. However, more recent work has implicated posterior cortical regions [9-12], suggesting that PFC engagement during working memory is dependent on the degree of executive demand. We provide evidence from neurological patients with discrete PFC damage that challenges the dominant models attributing working memory to PFC-dependent systems. We show that neural oscillations, which provide a mechanism for PFC to communicate with posterior cortical regions [13], independently subserve communications both to and from PFC-uncovering parallel oscillatory mechanisms for working memory. Fourteen PFC patients and 20 healthy, age-matched controls performed a working memory task where they encoded, maintained, and actively processed information about pairs of common shapes. In controls, the electroencephalogram (EEG) exhibited oscillatory activity in the low-theta range over PFC and directional connectivity from PFC to parieto-occipital regions commensurate with executive processing demands. Concurrent alpha-beta oscillations were observed over parieto-occipital regions, with directional connectivity from parieto-occipital regions to PFC, regardless of processing demands. Accuracy, PFC low-theta activity, and PFC → parieto-occipital connectivity were attenuated in patients, revealing a PFC-independent, alpha-beta system. The PFC patients still demonstrated task proficiency, which indicates that the posterior alpha-beta system provides sufficient resources for working memory. Taken together, our findings reveal neurologically dissociable PFC and parieto-occipital systems and suggest that parallel, bidirectional oscillatory systems form the basis of working memory. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  15. Radioisotope heaters for spacecraft life support systems

    International Nuclear Information System (INIS)

    Shivers, R.W.; Murray, R.W.

    1974-01-01

    Future manned space flight requires the sanitary collection and disposal of biological wastes to minimize microbial contamination hazard. The recovery and reuse of water from such wastes are also necessary to reduce the weight of vehicles at launching and resupply logistics. The development and test of an engineering model, i.e. the completely integrated waste management-water system using radioisotopes for thermal energy, are described. This is capable of collecting and processing the wastes from four men during 180-day simulated space mission. The sub-systems include collection of feces, trash and urine, water reclamation, the storage, heating and dispensing of the water, and the disposal of feces, urine residue and other non-metallic waste material by incineration. (Mori, K.)

  16. Mobile 3D Viewer Supporting RFID System

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J J; Yang, S W; Choi, Y [Chungang Univ., Seoul (Korea, Republic of)

    2007-07-01

    As hardware capabilities of mobile devices are being rapidly enhanced, applications based upon mobile devices are also being developed in wider areas. In this paper, a prototype mobile 3D viewer with the object identification through RFID system is presented. To visualize 3D engineering data such as CAD data, we need a process to compute triangulated data from boundary based surface like B-rep solid or trimmed surfaces. Since existing rendering engines on mobile devices do not provide triangulation capability, mobile 3D programs have focused only on an efficient handling with pre-tessellated geometry. We have developed a light and fast triangulation process based on constrained Delaunay triangulation suitable for mobile devices in the previous research. This triangulation software is used as a core for the mobile 3D viewer on a PDA with RFID system that may have potentially wide applications in many areas.

  17. Mobile 3D Viewer Supporting RFID System

    International Nuclear Information System (INIS)

    Kim, J. J.; Yang, S. W.; Choi, Y.

    2007-01-01

    As hardware capabilities of mobile devices are being rapidly enhanced, applications based upon mobile devices are also being developed in wider areas. In this paper, a prototype mobile 3D viewer with the object identification through RFID system is presented. To visualize 3D engineering data such as CAD data, we need a process to compute triangulated data from boundary based surface like B-rep solid or trimmed surfaces. Since existing rendering engines on mobile devices do not provide triangulation capability, mobile 3D programs have focused only on an efficient handling with pre-tessellated geometry. We have developed a light and fast triangulation process based on constrained Delaunay triangulation suitable for mobile devices in the previous research. This triangulation software is used as a core for the mobile 3D viewer on a PDA with RFID system that may have potentially wide applications in many areas

  18. Reliability Growth in Space Life Support Systems

    Science.gov (United States)

    Jones, Harry W.

    2014-01-01

    A hardware system's failure rate often increases over time due to wear and aging, but not always. Some systems instead show reliability growth, a decreasing failure rate with time, due to effective failure analysis and remedial hardware upgrades. Reliability grows when failure causes are removed by improved design. A mathematical reliability growth model allows the reliability growth rate to be computed from the failure data. The space shuttle was extensively maintained, refurbished, and upgraded after each flight and it experienced significant reliability growth during its operational life. In contrast, the International Space Station (ISS) is much more difficult to maintain and upgrade and its failure rate has been constant over time. The ISS Carbon Dioxide Removal Assembly (CDRA) reliability has slightly decreased. Failures on ISS and with the ISS CDRA continue to be a challenge.

  19. System Administration Support/SWORDS G2

    Science.gov (United States)

    Dito, Scott Joseph

    2014-01-01

    The Soldier-Warfighter Operationally Responsive Deployer for Space (SWORDS) rocket is a dedicated small satellite launcher that will minimize danger and complexity in order to allow soldiers in the field to put payloads of up to 25kg into orbit from the field. The SWORDSG2 project is the development of a model, simulation, and ultimately a working application that will control and monitor the cryogenic fluid delivery to the SWORDS rocket for testing purposes. To accomplish this, the project is using the programming language environment Gensym G2. The environment is an all-inclusive application that allows development, testing, modeling, and finally operation of the unique application through graphical and programmatic methods. In addition, observation of the current cryogenic fluid delivery system in the Kennedy Space Center Cry Lab has allowed me to gain valuable experience of fluid systems and propelant delivery that is valuable to our team when developing amd modeling our own system.The ultimate goal of having a test-ready application to show to the heads of the project, and demonstrating G2's capabilities, by late 2014 will require hard work and intense study and understanding of not only the programming aspect but also the physical phenomena we want to model, observe, and control.

  20. Intelligent Information System to support decision making.

    Directory of Open Access Journals (Sweden)

    Kathrin Rodríguez Llanes

    2010-06-01

    Full Text Available Making decisions is complicated in a generalized way, the materials and humans resources of the entity we belong to depends on it, such as the fulfillment of its goals. But when the situations are complex, making decisions turns into a very difficult work, due to the great amount of aspects to consider when making the right choice. To make this efficiently the administration must to consult an important volume of information, which generally, is scattered and in any different formats. That’s why appears the need of developing software that crowd together all that information and be capable of, by using powerful search engines and process algorithms improve the good decisions making process. Considering previous explanation, a complete freeware developed product is proposed, this constitutes a generic and multi-platform solution, that using artificial intelligence techniques, specifically the cases based reasoning, gives the possibility to leaders of any institution or organism of making the right choice in any situation.With client-server architecture, this system is consumed from web as a service and it can be perfectly integrated with a management system or the geographic information system to facilitate the business process.

  1. Support for Quality Assurance in End-User Systems.

    Science.gov (United States)

    Klepper, Robert; McKenna, Edward G.

    1989-01-01

    Suggests an approach that organizations can take to provide centralized support services for quality assurance in end-user information systems, based on the experiences of a support group at Citicorp Mortgage, Inc. The functions of the support group include user education, software selection, and assistance in testing, implementation, and support…

  2. Evaluation of decision support systems for nuclear accidents

    International Nuclear Information System (INIS)

    Sdouz, G.; Mueck, K.

    1998-05-01

    In order to adopt countermeasures to protect the public after an accident in a nuclear power plant in an appropriate and optimum way, decision support systems offer a valuable assistance in supporting the decision maker in choosing and optimizing protective actions. Such decision support systems may range from simple systems to accumulate relevant parameters for the evaluation of the situation over prediction models for the rapid evaluation of the dose to be expected to systems which permit the evaluation and comparison of possible countermeasures. Since the establishment of a decision support systems obviously is also required in Austria, an evaluation of systems available or in the state of development in other countries or unions was performed. The aim was to determine the availability of decision support systems in various countries and to evaluate them with regard to depth and extent of the system. The evaluation showed that in most industrialized countries the requirement for a decision support system was realized, but in only few countries actual systems are readily available and operable. Most systems are limited to early phase consequences, i.e. dispersion calculations of calculated source terms and the estimation of exposure in the vicinity of the plant. Only few systems offer the possibility to predict long-term exposures by ingestion. Few systems permit also an evaluation of potential countermeasures, in most cases, however, limited to a few short-term countermeasures. Only one system which is presently not operable allows the evaluation of a large number of agricultural countermeasures. In this report the different systems are compared. The requirements with regard to an Austrian decision support system are defined and consequences for a possible utilization of a DSS or parts thereof for the Austrian decision support system are derived. (author)

  3. Review of Operation and Maintenance Support Systems for Research Reactors

    International Nuclear Information System (INIS)

    Jin, Kyungho; Heo, Gyunyoung; Park, Jaekwan

    2014-01-01

    Operation support systems do not directly control the plant but it can aid decision making itself by obtaining and analyzing large amounts of data. Recently, the demand of research reactor is growing and the need for operation support systems is increasing, but it has not been applied for research reactors. This study analyzes operation and maintenance support systems of NPPs and suggests appropriate systems for research reactors based on analysis. In this paper, operation support systems for research reactors are suggested by comparing with those of power reactors. Currently, research reactors do not cover special systems in order to improve safety and operability in comparison with power reactors. Therefore we expect to improve worth to use by introducing appropriate systems for research reactors. In further research, we will develop an appropriate system such as applications or tools that can be applied to the research reactor

  4. Analysis of Intel IA-64 Processor Support for Secure Systems

    National Research Council Canada - National Science Library

    Unalmis, Bugra

    2001-01-01

    .... Systems could be constructed for which serious security threats would be eliminated. This thesis explores the Intel IA-64 processor's hardware support and its relationship to software for building a secure system...

  5. Life Support Systems: Trace Contaminant and Particulate Control

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced Exploration Systems (AES) Life Support Systems project Trace Contaminant and Particulate Control task: Work in the area of trace contamination and...

  6. Licensing Support Network: An Electronic Discovery System

    International Nuclear Information System (INIS)

    Gil, A. V.; Jensen, D.; McKinnon, B.

    2002-01-01

    The necessary authorization for the U. S. Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM) to submit a License Application (LA) is contingent upon the policy process defined in the Nuclear Waste Policy Act, as amended (NWPA), with some steps yet to occur. In spite of this uncertainty, the DOE must take prudent and appropriate action now, and over the next several years, to prepare for submittal of an application and to facilitate the U. S. Nuclear Regulatory Commission (NRC) review of this application, if the Yucca Mountain site is recommended and approved for repository development. One of these steps the DOE has taken involves working with the NRC's Advisory Review Panel to develop Licensing Support Network (LSN) requirements and guidelines. The NRC has made a prototype of the LSN web page available at www.LSNNET.gov. The OCRWM part of the LSN currently has an indefinite life cycle and may need to remain in existence until the repository is closed, which could be as long as 325 years

  7. A quadrupole mass spectrometer system for nuclear safeguards applications

    International Nuclear Information System (INIS)

    Evans, P.J.

    1987-12-01

    An on-line enrichment monitor for nuclear safeguards-related surveillance of a pilot-scale gas centrifuge plant is described. This monitor utilises a quadrupole mass spectrometer to measure the isotopic composition of UF 6 in the feed and product gas streams. Details of the design and construction are given, and several difficulties are identified and discussed. Finally, the performance of this system is illustrated with typical results

  8. Modeling observations of solar coronal mass ejections with heliospheric imagers verified with the eliophysics System Observatory

    Czech Academy of Sciences Publication Activity Database

    Möstl, C.; Isavnin, A.; Boakes, P. D.; Kilpua, E. K. J.; Davies, J. A.; Harrison, R. A.; Barnes, D.; Krupař, Vratislav; Eastwood, J.; Good, S. W.; Forsyth, R. J.; Bothmer, V.; Reiss, M. A.; Amerstorfer, T.; Winslow, R. M.; Anderson, B.J.; Philpott, L. C.; Rodriguez, L.; Rouillard, A. P.; Gallagher, P.; Nieves-Chinchilla, T.; Zhang, T. L.

    2017-01-01

    Roč. 15, č. 7 (2017), s. 955-970 ISSN 1539-4956 R&D Projects: GA ČR(CZ) GJ17-06818Y Institutional support: RVO:68378289 Keywords : space weather * coronal mass ejections * STEREO * heliospheric imagers * Heliophysics System Observatory * heliophysics Subject RIV: BL - Plasma and Gas Discharge Physics OBOR OECD: Fluids and plasma physics (including surface physics) http://onlinelibrary.wiley.com/doi/10.1002/2017SW001614/full

  9. The Challenges for Real Estate Mass Valuation and Taxation System for the Economic Stabilization of Latvia

    OpenAIRE

    Barvika, S; Rausis, A; Geipele, I

    2012-01-01

    The real estate tax policy, as well as a massive reform in the real estate mass valuation was among major reforms of the Latvian government in the financial crisis management plan. These reforms were supported by the International Monetary Fund and European Commission. One of the directions for economic recovery suggested by the lenders to Latvia was a reform of taxation system including reviewing of stagnated real property tax principles. This reform met total critici...

  10. The High-Level Interface Definitions in the ASTRI/CTA Mini Array Software System (MASS)

    Science.gov (United States)

    Conforti, V.; Tosti, G.; Schwarz, J.; Bruno, P.; Cefal‘A, M.; Paola, A. D.; Gianotti, F.; Grillo, A.; Russo, F.; Tanci, C.; Testa, V.; Antonelli, L. A.; Canestrari, R.; Catalano, O.; Fiorini, M.; Gallozzi, S.; Giro, E.; Palombara, N. L.; Leto, G.; Maccarone, M. C.; Pareschi, G.; Stringhetti, L.; Trifoglio, M.; Vercellone, S.; Astri Collaboration; Cta Consortium

    2015-09-01

    ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana) is a Flagship Project funded by the Italian Ministry of Education, University and Research, and led by INAF, the Italian National Institute of Astrophysics. Within this framework, INAF is currently developing an end-to-end prototype, named ASTRI SST-2M, of a Small Size Dual-Mirror Telescope for the Cherenkov Telescope Array, CTA. A second goal of the project is the realization of the ASTRI/CTA mini-array, which will be composed of seven SST-2M telescopes placed at the CTA Southern Site. The ASTRI Mini Array Software System (MASS) is designed to support the ASTRI/CTA mini-array operations. MASS is being built on top of the ALMA Common Software (ACS) framework, which provides support for the implementation of distributed data acquisition and control systems, and functionality for log and alarm management, message driven communication and hardware devices management. The first version of the MASS system, which will comply with the CTA requirements and guidelines, will be tested on the ASTRI SST-2M prototype. In this contribution we present the interface definitions of the MASS high level components in charge of the ASTRI SST-2M observation scheduling, telescope control and monitoring, and data taking. Particular emphasis is given to their potential reuse for the ASTRI/CTA mini-array.

  11. A Knowledge Dictionary System for Scheduling Support

    Science.gov (United States)

    1988-10-01

    quantity of the resource is allocated; (g) two (or more) activities that conflict temporall , can only proceed if one or more of the activities are re...does not allow any parameter substitution but merely processes the contents of the file as a series of I:eystrokes. To create a macro, simply type...bytes in the system. When the hardware actually uses such a struc- ture (e.g., the Motorola 68000 series CPU) the OS will almost always present it that

  12. Development of support system for nuclear power plant piping

    International Nuclear Information System (INIS)

    Horino, Satoshi

    1987-01-01

    Ishikawajima-Harima Heavy Industries Co., Ltd. has advanced the development of Integrated Nuclear Plant Piping System (INUPPS) for nuclear power plants since 1980, and continued its improvement up to now. This time as its component, a piping support system (PISUP) has been developed. The piping support system deals with the structures such as piping supports and the stands for maintenance and inspection, and as for standard supporting structures, it builds up automatically the structures including the selection of optimum members by utilizing the standard patterns in cooperation with the piping design system including piping stress analysis. As for the supporting structures deviating from the standard, by amending a part of the standard patterns in dialogue from, structures can be built up. By using the data produced in this way, this system draws up consistently a design book, production management data and so on. From the viewpoint of safety, particular consideration is given to the aseismatic capability of nuclear power plants, and piping is fundamentally designed regidly to avoid resonance. It is necessary to make piping supports so as to have sufficient strength and rigidity. The features of the design of piping supports for nuclear power plant, the basic concept of piping support system, the constitution of the software and hardware, the standard patterns and the structural patterns of piping support system and so on are described. (Kako, I.)

  13. Extended Lagrangian formalism for rheonomic systems with variable mass

    Directory of Open Access Journals (Sweden)

    Mušicki Đorđe

    2017-01-01

    Full Text Available In this paper the extended Lagrangian formalism for the rheonomic systems (Dj. Mušicki, 2004, which began with the modification of the mechanics of such systems (V. Vujičić, 1987, is extended to the systems with variable mass, with emphasis on the corresponding energy relations. This extended Lagrangian formalism is based on the extension of the set of chosen generalized coordinates by new quantities, suggested by the form of nonstationary constraints, which determine the position of the frame of reference in respect to which these generalized coordinates refer. As a consequence, an extended system of the Lagrangian equations is formulated, accommodated to the variability of the masses of particles, where the additional ones correspond to the additional generalized coordinates. By means of these equations, the energy relations of such systems have been studied, where it is demonstrated that here there are four types of energy conservation laws. The obtained energy laws are more complete and natural than the corresponding ones in the usual Lagrangian formulation for such systems. It is demonstrated that the obtained energy laws, are in full accordance with the energy laws in the corresponding vector formulation, if they are expressed in terms of the quantities introduced in this formulation of mechanics. The obtained results are illustrated by an example: the motion of a rocket, which ejects the gasses backwards, while this rocket moves up a straight line on an oblique plane, which glides uniformly in a horizontal direction.

  14. Stochastic stationary response of a variable-mass system with mass disturbance described by Poisson white noise

    Science.gov (United States)

    Qiao, Yan; Xu, Wei; Jia, Wantao; Han, Qun

    2017-05-01

    Variable-mass systems have received widespread attention and show prominent significance with the explosive development of micro- and nanotechnologies, so there is a growing need to study the influences of mass disturbances on systems. This paper is devoted to investigating the stochastic response of a variable-mass system subject to weakly random excitation, in which the mass disturbance is modeled as a Poisson white noise. Firstly, the original system is approximately replaced by the associated conservative system with small disturbance based on the Taylor expansion technique. Then the stationary response of the approximate system is obtained by applying the stochastic averaging method. At last, a representative variable-mass oscillator is worked out to illustrate the effectiveness of the analytical solution by comparing with Monte Carlo simulation. The relative change of mean-square displacement is used to measure the influences of mass disturbance on system responses. Results reveal that the stochastic responses are more sensitive to mass disturbance for some system parameters. It is also found that the influences of Poisson white noise as the mass disturbance on system responses are significantly different from that of Gaussian white noise of the same intensity.

  15. A Comparative Study of Electronic Performance Support Systems

    Science.gov (United States)

    Nguyen, Frank; Klein, James D.; Sullivan, Howard

    2005-01-01

    Electronic performance support systems (EPSS) deliver relevant support information to users while they are performing tasks. The present study examined the effect of different types of EPSS on user performance, attitudes, system use and time on task. Employees at a manufacturing company were asked to complete a procedural software task and…

  16. Artificial and bioartificial support systems for liver failure

    DEFF Research Database (Denmark)

    Liu, J P; Gluud, L L; Als-Nielsen, B

    2004-01-01

    Artificial and bioartificial liver support systems may 'bridge' patients with acute or acute-on-chronic liver failure to liver transplantation or recovery.......Artificial and bioartificial liver support systems may 'bridge' patients with acute or acute-on-chronic liver failure to liver transplantation or recovery....

  17. Intelligent decision support system for operators of the supply ...

    African Journals Online (AJOL)

    Intelligent decision support system for operators of the supply department of oil and gas extracting industry. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... abnormal situations, pre-crash sensing, industrial drilling, decision-making support systems. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  18. Expanding the research area of behavior change support systems

    NARCIS (Netherlands)

    van Gemert-Pijnen, Julia E.W.C.; Reitberger, Wolfgang; Langrial, Sitwat; Ploderer, Bernd; Oinas-Kukkonen, Harri; Berkovsky, Shlomo; Freyne, Jill

    2013-01-01

    The First International Workshop on Behavior Change Support Systems attracted a great research interest. The selected papers focused on abstraction, implementation and evaluation of Behavior Change Support Systems. The workshop is an evidence of how researchers from around the globe have their own

  19. Theory, Software and Testing Examples for Decision Support Systems

    OpenAIRE

    Lewandowski, A.; Wierzbicki, A.P.

    1987-01-01

    Research in methodology of Decision Support Systems is one of the activities within the System and Decision Sciences Program which was initiated seven years ago and is still in the center of interests of SDS. During these years several methodological approaches and software tools have been developed; among others the DIDAS (Dynamic Interactive Decision Analysis and Support) and SCDAS (Selection Committed Decision Analysis and Support). Both methodologies gained a certain level of popularity a...

  20. Multiple excitation of supports - Part 2 : Implementation in TUBO system

    International Nuclear Information System (INIS)

    Galeao, A.C.N.R.; Barbosa, H.J.C.

    1980-12-01

    From the formulation of multiple excitation support problem, discussed in the first part of this work, and with the use of numerical techniques presented there, we discuss in this second part, the implementation in TUBO system, the follow procedure: Direct integration, Modal overlap, Spectral response emphasizing the aspects related to supports excitation. Finally, we present two numerical examples of TUBO system utilization in the solution of support movement problem. The several implemented computational procedures are compared. (E.G.) [pt

  1. Fissionlike phenomena for systems with mass A=110

    International Nuclear Information System (INIS)

    Heusch, B.

    1984-01-01

    We present a part of the considerable amount of data we obtained these last years in the study of composite systems of mass around 110. From the rotating liquid drop models, theses systems are known as nearly the most stable nuclei, i.e. angular momenta as large as 90 h can be fully absorbed. Only bombarding energies less than 8MeV/nucleon will be considered here avoiding therefore that imcomplete fusion, projectile fragmentation of other such mechanisms play a measurable role

  2. Turbulent flow chromatography TFC-tandem mass spectrometry supporting in vitro/vivo studies of NCEs in high throughput fashion.

    Science.gov (United States)

    Verdirame, Maria; Veneziano, Maria; Alfieri, Anna; Di Marco, Annalise; Monteagudo, Edith; Bonelli, Fabio

    2010-03-11

    Turbulent Flow Chromatography (TFC) is a powerful approach for on-line extraction in bioanalytical studies. It improves sensitivity and reduces sample preparation time, two factors that are of primary importance in drug discovery. In this paper the application of the ARIA system to the analytical support of in vivo pharmacokinetics (PK) and in vitro drug metabolism studies is described, with an emphasis in high throughput optimization. For PK studies, a comparison between acetonitrile plasma protein precipitation (APPP) and TFC was carried out. Our optimized TFC methodology gave better S/N ratios and lower limit of quantification (LOQ) than conventional procedures. A robust and high throughput analytical method to support hepatocyte metabolic stability screening of new chemical entities was developed by hyphenation of TFC with mass spectrometry. An in-loop dilution injection procedure was implemented to overcome one of the main issues when using TFC, that is the early elution of hydrophilic compounds that renders low recoveries. A comparison between off-line solid phase extraction (SPE) and TFC was also carried out, and recovery, sensitivity (LOQ), matrix effect and robustness were evaluated. The use of two parallel columns in the configuration of the system provided a further increase of the throughput. Copyright 2009 Elsevier B.V. All rights reserved.

  3. A pilot mass-storage system for KEK belle experiment

    International Nuclear Information System (INIS)

    Fujii, Hirofumi; Itoh, Ryosuke; Manabe, Atsushi; Miyamoto, Akiya; Morita, Youhei; Nozaki, Tadao; Sasaki, Takashi; Watase, Yoshiyuko; Yamakasi, Tokuyuki

    1996-01-01

    A pilot mass-storage system for KEK Belle (B-meson Physics) experiment has been developed. This experiment requires a high speed and large data recording system. The required recording speed is about 3 MB/sec in average and 15 MB/sec at maximum. The required volume is more than 30 TB/year. We have developed a pilot system to study the high-speed and large volume data recording system which satisfies the above requirements. The system consists of (1) SONY-DIR 1000M data recorder with SCSI-2 Fast/Wide interface; the recording capability of the device is 16MB/sec art maximum. (2) SONY-DMS 24 tape robot (tape library) of which volume capacity is about 2 TB (3) high-speed TCP/IP network of HIPPI and (4) three workstations running under UNIX. For the system software, the CERN-SHIFT system has been installed for the study. Because that the tape device and the robot (tape library) system are completely part. The tape device and the robot (library) control path are directly connected to UNIX workstations. To achieve the required recording speed, we also developed an application interfaces for this tape server. We have made the user interface without using tape stating mechanism. This user interface reduces the overhead of the recording system has developed based on TCP/IP, so that the system is easy to expand and free from network media. (author)

  4. Radioecology and Environmental Decision Support Systems

    International Nuclear Information System (INIS)

    Semioshkina, N.; Voigt, G.; Fiedler, I.

    2015-01-01

    According to Wikipedia Radioecology is a branch of ecology, which studies how radioactive substances interact with nature; how different mechanisms affect the substances’ migration and uptake in food chains and ecosystems. Investigations in radioecology might include aspects of field sampling, designed field and laboratory experiments and the development of predictive simulation models. This science combines techniques from some of the more basic, traditional fields, such as physics, chemistry, mathematics, biology, and ecology, with applied concepts in radiation protection. Radioecological studies form the basis for estimating doses and assessing the consequences of radioactive pollution for human health and the environment. Significant economic and social disruptions arise after radioactive contamination of land as a result of releases of radioactivity into the environment be it from accidents, routine and war operations or during decommissioning and waste management of nuclear facilities. Measures carried out to reduce and minimise radiation doses to the public can give rise to even more concerns as often they are not understood and the stakeholders are often not involved into the decision making process. Countermeasures are needed to reduce population exposure, at the same time minimising economic and social costs. The effectiveness of countermeasures is not only highly dependent on factors which are connected to environmental transfer, but also to special behaviour and consumption behaviours in varying food production systems. A central aspect of radioecology is the identification of vulnerable areas which, by virtue of the processes governing the transfer of radiocaesium through food chains, deliver high individual, or collective doses to man. Social factors (e.g. dietary preferences) and agricultural production techniques also contribute to vulnerability. (author)

  5. An extrasolar planetary system with three Neptune-mass planets.

    Science.gov (United States)

    Lovis, Christophe; Mayor, Michel; Pepe, Francesco; Alibert, Yann; Benz, Willy; Bouchy, François; Correia, Alexandre C M; Laskar, Jacques; Mordasini, Christoph; Queloz, Didier; Santos, Nuno C; Udry, Stéphane; Bertaux, Jean-Loup; Sivan, Jean-Pierre

    2006-05-18

    Over the past two years, the search for low-mass extrasolar planets has led to the detection of seven so-called 'hot Neptunes' or 'super-Earths' around Sun-like stars. These planets have masses 5-20 times larger than the Earth and are mainly found on close-in orbits with periods of 2-15 days. Here we report a system of three Neptune-mass planets with periods of 8.67, 31.6 and 197 days, orbiting the nearby star HD 69830. This star was already known to show an infrared excess possibly caused by an asteroid belt within 1 au (the Sun-Earth distance). Simulations show that the system is in a dynamically stable configuration. Theoretical calculations favour a mainly rocky composition for both inner planets, while the outer planet probably has a significant gaseous envelope surrounding its rocky/icy core; the outer planet orbits within the habitable zone of this star.

  6. Reconfigurable Manufacturing Systems as an Application of Mass Customisation

    DEFF Research Database (Denmark)

    Jørgensen, Steffen; Nielsen, Kjeld; Jørgensen, Kaj Asbjørn

    2011-01-01

    Manufacturing systems are today developed as engineer to order solutions tailored to producing a specific product or a limited product mix. Such dedicated systems are not consistent with market demands for rapid product changes, product variety, and customisation, which require flexibility...... and responsiveness of manufacturing systems. A Reconfigurable Manufacturing System (RMS) is aimed at possess such flexibility and responsiveness and is said to be the manufacturing paradigm of tomorrow. RMS is, though, not yet fully developed. A similarity between RMS and modular product families, known from Mass...... Customisation (MC), is seen and based on this similarity a potential to maturing RMS further by applying MC methods and techniques is identified. Based on literature surveys this paper analyses this potential by diagnosing gabs for RMS to succeed as a MC product. For each gab MC theory holds related methods...

  7. Obesity, Fat Mass and Immune System: Role for Leptin

    Directory of Open Access Journals (Sweden)

    Vera Francisco

    2018-06-01

    Full Text Available Obesity is an epidemic disease characterized by chronic low-grade inflammation associated with a dysfunctional fat mass. Adipose tissue is now considered an extremely active endocrine organ that secretes cytokine-like hormones, called adipokines, either pro- or anti-inflammatory factors bridging metabolism to the immune system. Leptin is historically one of most relevant adipokines, with important physiological roles in the central control of energy metabolism and in the regulation of metabolism-immune system interplay, being a cornerstone of the emerging field of immunometabolism. Indeed, leptin receptor is expressed throughout the immune system and leptin has been shown to regulate both innate and adaptive immune responses. This review discusses the latest data regarding the role of leptin as a mediator of immune system and metabolism, with particular emphasis on its effects on obesity-associated metabolic disorders and autoimmune and/or inflammatory rheumatic diseases.

  8. Designing modular manufacturing systems using mass customisation theories and methods

    DEFF Research Database (Denmark)

    Jørgensen, Steffen Nordahl; Hvilshøj, Mads; Madsen, Ole

    2012-01-01

    Today, manufacturing systems are developed as engineered to order (ETO) solutions tailored to produce a specific product or a limited product mix. However, such dedicated systems are not consistent with the current market demands for rapid product changes, high product variety, and customisation....... In response, modular manufacturing systems (MMS) are evolving, which are aimed to possess the required responsiveness and to be the manufacturing paradigm of mass customisation (MC). Hereby, MMS brings the development process of manufacturing systems against configured to order (CTO). Up to now, research...... in MMS has primarily focused on potential benefits, basic principles, and enabling technologies, while the approaches of actually designing and creating modular architectures have received less attention. A potential to fill these gaps by applying MC theories and methods is identified based...

  9. The NEEDS Data Base Management and Archival Mass Memory System

    Science.gov (United States)

    Bailey, G. A.; Bryant, S. B.; Thomas, D. T.; Wagnon, F. W.

    1980-01-01

    A Data Base Management System and an Archival Mass Memory System are being developed that will have a 10 to the 12th bit on-line and a 10 to the 13th off-line storage capacity. The integrated system will accept packetized data from the data staging area at 50 Mbps, create a comprehensive directory, provide for file management, record the data, perform error detection and correction, accept user requests, retrieve the requested data files and provide the data to multiple users at a combined rate of 50 Mbps. Stored and replicated data files will have a bit error rate of less than 10 to the -9th even after ten years of storage. The integrated system will be demonstrated to prove the technology late in 1981.

  10. Intelligent Flight Support System (IFSS): A Real-time Intelligent Decision Support Prototype, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The integration of the analysis tools with the advanced visualization capabilities in The Intelligent Flight Support System (IFSS) can provide a unique method for...

  11. Measurements of Critical Heat Flux using Mass Transfer System

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Seung Hyun; Chung Bum Jin [Kyunghee University, Yongin (Korea, Republic of)

    2016-05-15

    In a severe accident, the reactor vessel is heated by the decay heat from core melts and the outer surface of reactor vessel is cooled by the natural convection of water pool. When the heat flux increases, boiling will start. Further increase of the heat flux may result in the CHF, which is generated by the bubble combinations. The CHF means that the reactor vessel was separated with coolant and wall temperature is raised rapidly. It may damage the reactor vessel. Also the CHF indicates the maximum cooling capability of the system. Therefore, the CHF has been used as a criterion for the regulatory and licensing. Mechanism of hydrogen vapor bubbles generated and combined can be simulated water bubbles mechanism. And also the both heat and mass transfer mechanism of CHF can be identified in the same methods. Therefore, the CHF phenomena can be simulated enough by mass transfer.

  12. Nutritional and cultural aspects of plant species selection for a controlled ecological life support system

    Science.gov (United States)

    Hoff, J. E.; Howe, J. M.; Mitchell, C. A.

    1982-01-01

    The feasibility of using higher plants in a controlled ecological life support system is discussed. Aspects of this system considered important in the use of higher plants include: limited energy, space, and mass, and problems relating to cultivation and management of plants, food processing, the psychological impact of vegetarian diets, and plant propagation. A total of 115 higher plant species are compared based on 21 selection criteria.

  13. Selecting effective persuasive strategies in behavior change support systems: Third International Workshop on Behavior Change Support Systems (BCSS 2015)

    NARCIS (Netherlands)

    Kelders, Saskia Marion; Kulyk, Olga Anatoliyivna; van Gemert-Pijnen, Julia E.W.C.; Oinas-Kukkonen, Harri; Kelders, Saskia; Kulyk, Olga; van Gemert-Pijnen, Lisette; Oinas-Kukkonen, Harri

    2015-01-01

    The Third International Workshop on Behavior Change Support Systems provides a place to discuss recent advances in BCSS research. The selected papers show that research into behavior change support systems is expanding: not only by trying to reach more and other people, but also by expanding the

  14. Design of a ram accelerator mass launch system

    Science.gov (United States)

    Aarnio, Michael; Armerding, Calvin; Berschauer, Andrew; Christofferson, Erik; Clement, Paul; Gohd, Robin; Neely, Bret; Reed, David; Rodriguez, Carlos; Swanstrom, Fredrick

    1988-01-01

    The ram accelerator mass launch system has been proposed to greatly reduce the costs of placing acceleration-insensitive payloads into low earth orbit. The ram accelerator is a chemically propelled, impulsive mass launch system capable of efficiently accelerating relatively large masses from velocities of 0.7 km/sec to 10 km/sec. The principles of propulsion are based on those of a conventional supersonic air-breathing ramjet; however the device operates in a somewhat different manner. The payload carrying vehicle resembles the center-body of the ramjet and accelerates through a stationary tube which acts as the outer cowling. The tube is filled with premixed gaseous fuel and oxidizer mixtures that burn in the vicinity of the vehicle's base, producing a thrust which accelerates the vehicle through the tube. This study examines the requirement for placing a 2000 kg vehicle into a 500 km circular orbit with a minimum amount of on-board rocket propellant for orbital maneuvers. The goal is to achieve a 50 pct payload mass fraction. The proposed design requirements have several self-imposed constraints that define the vehicle and tube configurations. Structural considerations on the vehicle and tube wall dictate an upper acceleration limit of 1000 g's and a tube inside diameter of 1.0 m. In-tube propulsive requirements and vehicle structural constraints result in a vehicle diameter of 0.76 m, a total length of 7.5 m and a nose-cone half angle of 7 degrees. An ablating nose-cone constructed from carbon-carbon composite serves as the thermal protection mechanism for atmospheric transit.

  15. Systems analysis support to the waste management technology center

    International Nuclear Information System (INIS)

    Rivera, A.L.; Osborne-Lee, I.W.; DePaoli, S.M.

    1988-01-01

    This paper describes a systems analysis concept being developed in support of waste management planning and analysis activities for Martin Marietta Energy Systems, Inc. (Energy Systems), sites. This integrated systems model serves as a focus for the accumulation and documentation of technical and economic information from current waste management practices, improved operations projects, remedial actions, and new system development activities. The approach is generic and could be applied to a larger group of sites. This integrated model is a source of technical support to waste management groups in the Energy Systems complex for integrated waste management planning and related technology assessment activities. This problem-solving methodology for low-level waste (LLW) management is being developed through the Waste Management Technology Center (WMTC) for the Low-Level Waste Disposal, Development, and Demonstration (LLWDDD) Program. In support of long-range planning activities, this capability will include the development of management support tools such as specialized systems models, data bases, and information systems. These management support tools will provide continuing support in the identification and definition of technical and economic uncertainties to be addressed by technology demonstration programs. Technical planning activities and current efforts in the development of this system analysis capability for the LLWDDD Program are presented in this paper

  16. Mass-produced multi-walled carbon nanotubes as catalyst supports for direct methanol fuel cells.

    Science.gov (United States)

    Jang, In Young; Park, Ki Chul; Jung, Yong Chae; Lee, Sun Hyung; Song, Sung Moo; Muramatsu, Hiroyuki; Kim, Yong Jung; Endo, Morinobu

    2011-01-01

    Commercially mass-produced multi-walled carbon nanotubes, i.e., VGNF (Showa Denko Co.), were applied to support materials for platinum-ruthenium (PtRu) nanoparticles as anode catalysts for direct methanol fuel cells. The original VGNFs are composed of high-crystalline graphitic shells, which hinder the favorable surface deposition of the PtRu nanoparticles that are formed via borohydride reduction. The chemical treatment of VGNFs with potassium hydroxide (KOH), however, enables highly dispersed and dense deposition of PtRu nanoparticles on the VGNF surface. This capability becomes more remarkable depending on the KOH amount. The electrochemical evaluation of the PtRu-deposited VGNF catalysts showed enhanced active surface areas and methanol oxidation, due to the high dispersion and dense deposition of the PtRu nanoparticles. The improvement of the surface deposition states of the PtRu nanoparticles was significantly due to the high surface area and mesorporous surface structure of the KOH-activated VGNFs.

  17. Instrumentation and control activities at the electric power research institute to support computerized support systems

    International Nuclear Information System (INIS)

    Naser, J.

    1996-01-01

    Most nuclear power plants in the United States are operating with their original analog I and C equipment. This equipment requires increasing maintenance efforts to sustain systems performance. Decreasing availability of replacement parts and support organization for analog technology accentuate obsolescence problems and resultant O and M cost increases. Modern technology, especially digital systems, offers improved functionality, performance, and reliability; solutions to obsolescence of equipment; reduction in O and M costs; and the potential to enhance safety. Digital systems, including computerized support systems, with their inherent advantages will be implemented only if reliable and cost-effective implementation and licensing acceptance is achieved and if the upgraded systems supports reduced power production costs. EPRI and its member utilities are working together under the Integrated I and C Upgrade Initiative to address I and C issues. (author). 23 refs

  18. Instrumentation and control activities at the Electric Power Research Institute to support operator support systems

    International Nuclear Information System (INIS)

    Naser, J.

    1995-01-01

    Most nuclear power plants in the United States continue to operate with analog instrumentation and control (I and C) technology designed 20 to 40 years ago. This equipment is approaching or exceeding its life expectancy, resulting in increasing maintenance efforts to sustain system performance. Decreasing availability of replacement parts and the accelerating deterioration of the infrastructure of manufacturers that support analog technology exacerbate obsolescence problems and resultant operation and maintenance (O and M) cost increases. Modern digital technology holds a significant potential to improve the safety, cost-effectiveness, productivity, and, therefore, competitiveness of nuclear power plants. Operator support systems provide the tools to help achieve this potential. Reliable, integrated information is a critical element for protecting the utility's capital investment and increasing availability, reliability, and productivity. Integrated operator support systems with integrated information can perform more effectively to increase productivity, to enhance safety, and to reduce O and M costs. The plant communications and computing architecture is the infrastructure needed to allow the implementation of I and C systems and associated operator support systems in an integrated manner. Current technology for distributed digital systems, plant process computers, and plant communications and computing networks support the integration of systems and information. (author). 16 refs

  19. Mass Transport: Circulatory System with Emphasis on Nonendothermic Species.

    Science.gov (United States)

    Crossley, Dane A; Burggren, Warren W; Reiber, Carl L; Altimiras, Jordi; Rodnick, Kenneth J

    2016-12-06

    Mass transport can be generally defined as movement of material matter. The circulatory system then is a biological example given its role in the movement in transporting gases, nutrients, wastes, and chemical signals. Comparative physiology has a long history of providing new insights and advancing our understanding of circulatory mass transport across a wide array of circulatory systems. Here we focus on circulatory function of nonmodel species. Invertebrates possess diverse convection systems; that at the most complex generate pressures and perform at a level comparable to vertebrates. Many invertebrates actively modulate cardiovascular function using neuronal, neurohormonal, and skeletal muscle activity. In vertebrates, our understanding of cardiac morphology, cardiomyocyte function, and contractile protein regulation by Ca2+ highlights a high degree of conservation, but differences between species exist and are coupled to variable environments and body temperatures. Key regulators of vertebrate cardiac function and systemic blood pressure include the autonomic nervous system, hormones, and ventricular filling. Further chemical factors regulating cardiovascular function include adenosine, natriuretic peptides, arginine vasotocin, endothelin 1, bradykinin, histamine, nitric oxide, and hydrogen sulfide, to name but a few. Diverse vascular morphologies and the regulation of blood flow in the coronary and cerebral circulations are also apparent in nonmammalian species. Dynamic adjustments of cardiovascular function are associated with exercise on land, flying at high altitude, prolonged dives by marine mammals, and unique morphology, such as the giraffe. Future studies should address limits of gas exchange and convective transport, the evolution of high arterial pressure across diverse taxa, and the importance of the cardiovascular system adaptations to extreme environments. © 2017 American Physiological Society. Compr Physiol 7:17-66, 2017. Copyright © 2017 John

  20. Rational Design of Tunnel Supports: An Interactive Graphics Based Analysis of the Support Requirements of Excavations in Jointed Rock Masses.

    Science.gov (United States)

    1979-09-01

    joint orientetion and joint slippage than to failure of the intact rock mass. Dixon (1971) noted the importance of including the confining influence of...dedicated computer. The area of research not covered by this investigation which holds promise for a future study is a detailed comparison of the results of...block data, type key "W". The program writes this data on Linc tapes for future retripval. This feature can be used to store the consolidated block

  1. Argentina's operator support systems in nuclear power plants

    International Nuclear Information System (INIS)

    Goldstein, M.; Palamidessi, H.

    1996-01-01

    The development of operator support systems for nuclear power plants started in Argentina a few years ago. Four systems are at present deployed or under development. The participation of utility personnel in the co-ordinated research program has helped in revising the current experience and in selecting and specifying the systems to be developed and the resources needed for their implementation. Main efforts will be aimed to the selection of those systems that can be more easily implemented, to improve the data retrieval and handling, to develop diverse supplies of software products and to promote the understanding of support systems among the potential end users. (author). 12 refs

  2. Integration of a satellite ground support system based on analysis of the satellite ground support domain

    Science.gov (United States)

    Pendley, R. D.; Scheidker, E. J.; Levitt, D. S.; Myers, C. R.; Werking, R. D.

    1994-11-01

    This analysis defines a complete set of ground support functions based on those practiced in real space flight operations during the on-orbit phase of a mission. These functions are mapped against ground support functions currently in use by NASA and DOD. Software components to provide these functions can be hosted on RISC-based work stations and integrated to provide a modular, integrated ground support system. Such modular systems can be configured to provide as much ground support functionality as desired. This approach to ground systems has been widely proposed and prototyped both by government institutions and commercial vendors. The combined set of ground support functions we describe can be used as a standard to evaluate candidate ground systems. This approach has also been used to develop a prototype of a modular, loosely-integrated ground support system, which is discussed briefly. A crucial benefit to a potential user is that all the components are flight-qualified, thus giving high confidence in their accuracy and reliability.

  3. Development of the Supported Decision Making Inventory System.

    Science.gov (United States)

    Shogren, Karrie A; Wehmeyer, Michael L; Uyanik, Hatice; Heidrich, Megan

    2017-12-01

    Supported decision making has received increased attention as an alternative to guardianship and a means to enable people with intellectual and developmental disabilities to exercise their right to legal capacity. Assessments are needed that can used by people with disabilities and their systems of supports to identify and plan for needed supports to enable decision making. This article describes the steps taken to develop such an assessment tool, the Supported Decision Making Inventory System (SDMIS), and initial feedback received from self-advocates with intellectual disability. The three sections of the SDMIS (Supported Decision Making Personal Factors Inventory, Supported Decision Making Environmental Demands Inventory, and Decision Making Autonomy Inventory) are described and implications for future research, policy, and practice are discussed.

  4. The Logistics Management Decision Support System (LMDSS) : an effective tool to reduce life cycle support costs of aviation systems

    OpenAIRE

    Moore, Ellen E.; Snyder, Carolynn M.

    1998-01-01

    Approved for public release; distribution is unlimited This thesis assesses the capability of the Logistics Management Decision Support System (LMDSS) to meet the information needs of Naval Air Systems Command (NAVAIR) logistics managers based on surveys of logistics managers and interviews with LMDSS program representatives. The LMDSS is being introduced as a tool to facilitate action by NAVAIR logistics managers to reduce the life cycle support costs of aviation systems while protecting ...

  5. 75 FR 76757 - Licensing Support System Advisory Review Panel

    Science.gov (United States)

    2010-12-09

    ... provide advice on the fundamental issues of design and development of an electronic information management... the disposal of high-level radioactive waste, and on the operation and maintenance of the system. This electronic information management system was known as the Licensing Support System (LSS). In November, 1998...

  6. Designing, Modeling and Evaluating Influence Strategiesfor Behavior Change Support Systems

    NARCIS (Netherlands)

    Öörni, Anssi; Kelders, Saskia Marion; van Gemert-Pijnen, Julia E.W.C.; Oinas-Kukkonen, Harri

    2014-01-01

    Behavior change support systems (BCSS) research is an evolving area. While the systems have been demonstrated to work to the effect, there is still a lot of work to be done to better understand the influence mechanisms of behavior change, and work out their influence on the systems architecture. The

  7. IAEA activity on operator support systems in nuclear power plants

    International Nuclear Information System (INIS)

    Dounaev, V.; Fujita, Y.; Juslin, K.; Haugset, K.; Lux, I.; Naser, J.

    1994-01-01

    Various operator support systems for nuclear power plants are already operational or under development in the IAEA Member States. Operator support systems are based on intelligent data processing and, in addition to plant operation, they are also becoming more important for safety. A key feature of operator support systems is their availability to restructure data to increase its relevance for a given situation. This can improve the user's ability to identify plant mode, system state, and component state and to identify and diagnose faults. Operator support systems can also assist the user in planning and implementing corrective actions to improve the nuclear power plant's availability and safety. In September 1991, the IAEA Committee for Contractual Scientific Services approved the Co-ordinated Research Programme (CRP) on ''Operator Support Systems in Nuclear Power Plants'' in the framework of the Project ''Man-Machine Interface Studies''. The main objective of this programme is to provide guidance and technology transfer for the development and implementation of operator support systems. This includes the experience with human-machine interfaces and closely related issues such as instrumentation and control, the use of computers in nuclear power plants, and operator qualification. (author)

  8. A Review of Decisions Support Systems for Manufacturing Systems

    OpenAIRE

    Felsberger, Andreas; Oberegger, Bernhard; Reiner, Gerald

    2017-01-01

    In the field of manufacturing systems automated data acquisition and development of technological innovations like manufacturing execution systems (MES), Enterprise Resource Planning (ERP), Advanced Planning Systems (APS) and new trends in Big Data and Business Intelligence (BI) have given rise to new applications and methods of existing decisionsupport technologies. Today manufacturers need an adaptive system that helps to react and adapt to the constantly changing business environment. The ...

  9. Decision Support Systems for Research and Management in Advanced Life Support

    Science.gov (United States)

    Rodriquez, Luis F.

    2004-01-01

    Decision support systems have been implemented in many applications including strategic planning for battlefield scenarios, corporate decision making for business planning, production planning and control systems, and recommendation generators like those on Amazon.com(Registered TradeMark). Such tools are reviewed for developing a similar tool for NASA's ALS Program. DSS are considered concurrently with the development of the OPIS system, a database designed for chronicling of research and development in ALS. By utilizing the OPIS database, it is anticipated that decision support can be provided to increase the quality of decisions by ALS managers and researchers.

  10. Creating a Structured Support System for Postsecondary Success

    Science.gov (United States)

    White, Carol Cutler

    2018-01-01

    For numerous reasons, it can be difficult for foster youth to succeed in postsecondary education. This chapter offers insight into state-level policies and programs, community college programs dedicating to supporting foster youth, and a framework for creating a structured support system to increase student success.

  11. A sustainable and affordable support system for rural healthcare delivery

    CSIR Research Space (South Africa)

    Barjis, J

    2013-12-01

    Full Text Available . The proposed system is decision support driven in that it supports medical staff (nurses, doctors) to decide on the course of intervention or further treatment based on the vital signs of the patients that are tele-monitored on a regular basis. This patient...

  12. System for Selection of Relevant Information for Decision Support

    Czech Academy of Sciences Publication Activity Database

    Kalina, Jan; Seidl, L.; Zvára, K.; Grünfeldová, H.; Slovák, Dalibor; Zvárová, Jana

    2013-01-01

    Roč. 1, č. 1 (2013), s. 46-46 ISSN 1805-8698. [EFMI 2013 Special Topic Conference. 17.04.2013-19.04.2013, Prague] Institutional support: RVO:67985807 Keywords : decision support system * web-service * information extraction * high-dimension * gene expressions Subject RIV: IN - Informatics, Computer Science

  13. Research on operation support system for nuclear power plants

    International Nuclear Information System (INIS)

    Wakabayashi, Jiro

    1989-01-01

    Nuclear power plants are the typical, complex, large scale engineering system, and at the time of accidents, there is the possibility to extend disasters to wide range beyond borders, therefore, it is the feature that the requirement for their reliability and safety is much severe as compared with other engineering systems. The fact that human errors become the major cause of large accidents is in common in large scale engineering systems, and the development of the operation support system for preventing it has become an important research subject. Also the research on design support system and maintenance support system is in progress to prevent human errors. Operation support system is composed of diagnostic system, operation guide system, man-machine interface and knowledge data base, and throughout these, the research on the human errors arising in the process of human decision making becomes the basis. Rasmussen's model for decision making, the classification of human errors and the reliability analysis for men, the factors affecting human errors, the acquisition of knowledge, the compilation and management of knowledge data base, the diagnostic system, operation guide system and man-machine interface are described. (K.I.)

  14. AHMCT Intelligent Roadway Information System (IRIS) technical support and testing

    Science.gov (United States)

    2011-12-31

    This report documents the research project AHMCT IRIS Technical Support and Testing, : performed under contract 65A0275, Task ID 1777. It presents an overview of the Intelligent : Roadway Information System (IRIS), and its design and function. ...

  15. Marketing Decision Support Systems: Adoption, Use and Satisfaction

    NARCIS (Netherlands)

    B. Wierenga (Berend); P.A.M. Oude Ophuis (Peter)

    1997-01-01

    textabstractThis paper deals with marketing decision support systems (MDSS) in companies. In a conceptual framework five categories of factors are distinguished that potentially affect adoption, use, and satisfaction: external environment factors, organizational factors, task environment factors,

  16. A decision support system-based procedure for evaluation and ...

    Indian Academy of Sciences (India)

    with an overview of the web-based Decision Support System (DSS) developed to facilitate its wide adop- tion. .... contributes significant catchment management and water supply functions .... experience in engagement and facilitation methods.

  17. Improving lives through a bioartificial liver support system

    CSIR Research Space (South Africa)

    Naidoo, K

    2008-11-01

    Full Text Available This poster covers the development of a technology towards a novel bioartificial liver support system (BALSS) that is capable of providing liver functions, in patients with acute liver failure, while housed outside the body (extra corporeal...

  18. Novel Composite Membrane for Space Life Supporting System, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Space life-supporting systems require effective removal of metabolic CO2 from the cabin atmosphere with minimal loss of O2. Conventional techniques, using either...

  19. Marketing decision support systems: Adoption, use and satisfaction.

    NARCIS (Netherlands)

    Wierenga, B.; Oude Ophuis, P.A.M.

    1997-01-01

    This paper deals with marketing decision support systems (MDSS) in companies. In a conceptual framework five categories of factors are distinguished that potentially affect adoption, use, and satisfaction: external environment factors, organizational factors, task environment factors, user factors

  20. Enhanced digital library system that supports sustainable knowledge

    African Journals Online (AJOL)

    Enhanced digital library system that supports sustainable knowledge: A focus ... This research work provides a Web-Based University library, ability to access the ... and generates pins to authorize bonafide students and staff of the University.

  1. The Systems Engineering Process for Human Support Technology Development

    Science.gov (United States)

    Jones, Harry

    2005-01-01

    Systems engineering is designing and optimizing systems. This paper reviews the systems engineering process and indicates how it can be applied in the development of advanced human support systems. Systems engineering develops the performance requirements, subsystem specifications, and detailed designs needed to construct a desired system. Systems design is difficult, requiring both art and science and balancing human and technical considerations. The essential systems engineering activity is trading off and compromising between competing objectives such as performance and cost, schedule and risk. Systems engineering is not a complete independent process. It usually supports a system development project. This review emphasizes the NASA project management process as described in NASA Procedural Requirement (NPR) 7120.5B. The process is a top down phased approach that includes the most fundamental activities of systems engineering - requirements definition, systems analysis, and design. NPR 7120.5B also requires projects to perform the engineering analyses needed to ensure that the system will operate correctly with regard to reliability, safety, risk, cost, and human factors. We review the system development project process, the standard systems engineering design methodology, and some of the specialized systems analysis techniques. We will discuss how they could apply to advanced human support systems development. The purpose of advanced systems development is not directly to supply human space flight hardware, but rather to provide superior candidate systems that will be selected for implementation by future missions. The most direct application of systems engineering is in guiding the development of prototype and flight experiment hardware. However, anticipatory systems engineering of possible future flight systems would be useful in identifying the most promising development projects.

  2. A decision support system for on-line leakage localization

    OpenAIRE

    Meseguer, Jordi; Mirats-Tur, Josep M.; Cembrano, Gabriela; Puig, Vicenç; Quevedo, Joseba; Pérez, Ramon; Sanz, Gerard; Ibarra, David

    2014-01-01

    This paper describes a model-driven decision-support system (software tool) implementing a model-based methodology for on-line leakage detection and localization which is useful for a large class of water distribution networks. Since these methods present a certain degree of complexity which limits their use to experts, the proposed software tool focuses on the integration of a method emphasizing its use by water network managers as a decision support system. The proposed software tool integr...

  3. Systems for 42 V mass-market automobiles

    Science.gov (United States)

    Keim, Thomas A.

    With the introduction of the Toyota Crown Royal Saloon in August, 2001, 42 V automotive electrical systems made the transition from a technology for the future to present-day production. Nevertheless, there is widespread malaise in the 42 V technical community, stemming from a slower than expected introduction to the marketplace. This paper discusses some of the reasons for the slow adoption of this technology, and indicates a possible way forward. This paper looks beyond the initial uses of 42 V in limited-volume, high-end cars and light trucks, and discusses the prospects for 42 V in mass-market vehicles, given what is presently known about the technology. It is concluded that a case can be made for 42 V, even at some increment in cost. The motivation is improved fuel economy. The cost targets necessary for this benefit to be achieved are discussed, and new components being widely discussed as part of future electrical systems are evaluated for mass-market applications. New developments with higher potential are suggested.

  4. Automated spike preparation system for Isotope Dilution Mass Spectrometry (IDMS)

    International Nuclear Information System (INIS)

    Maxwell, S.L. III; Clark, J.P.

    1990-01-01

    Isotope Dilution Mass Spectrometry (IDMS) is a method frequently employed to measure dissolved, irradiated nuclear materials. A known quantity of a unique isotope of the element to be measured (referred to as the ''spike'') is added to the solution containing the analyte. The resulting solution is chemically purified then analyzed by mass spectrometry. By measuring the magnitude of the response for each isotope and the response for the ''unique spike'' then relating this to the known quantity of the ''spike'', the quantity of the nuclear material can be determined. An automated spike preparation system was developed at the Savannah River Site (SRS) to dispense spikes for use in IDMS analytical methods. Prior to this development, technicians weighed each individual spike manually to achieve the accuracy required. This procedure was time-consuming and subjected the master stock solution to evaporation. The new system employs a high precision SMI Model 300 Unipump dispenser interfaced with an electronic balance and a portable Epson HX-20 notebook computer to automate spike preparation

  5. Intelligent car guidance system (parking support system); Chiteki sharyo yudo system (chusha shien system)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This system enables a driver to park the car at a predetermined spot without the driver seeing the outside scene. The system shows on a driver seat display the steps that the driver is to follow and thereby supports the driver when visibility is poor, when the parking space is difficult to approach, when the driver is a novice, or when the driver is aged. The system ensures accurate positioning of the car by showing the steering direction and angle, the car speed, and the force of braking to the driver. For this purpose, the system knows the absolute car position by the use of an RFID (Radio Frequency Identification) tag which is a kind of IC (Integrated Circuit) card and D-GPS (Differential-Global Positioning System), grasps the relative car position by the use of a gyroscope, and collects data from plural sensors, which are complementary to each other, such as a car-speed sensor and a steering sensor. (translated by NEDO)

  6. Utilizing Mass Customization Methods for Modular Manufacturing System Design

    DEFF Research Database (Denmark)

    Jørgensen, Steffen; Jacobsen, Alexia; Nielsen, Kjeld

    2011-01-01

    Markets today have become dynamic and demand rapid product changes, product variety, and customized products. In order to operate under and taking advantages of such conditions requires, amongst other aspects, manufacturing processes robust to product changes - a contradiction to traditional...... manufacturing systems developed as dedicated engineer-to-order solutions, tailored to production of a specific product or a limited product assortment. In response, modular manufacturing concepts are evolving, which are aimed at possessing the needed responsiveness and aimed at being the manufacturing paradigm...... of Mass Customization (MC). Research focus has been on the basic principles and enabling technologies, while modular architectures and system design have received less attention. A potential to fill these gaps by applying selected design theories and methods of MC have been seen. Based on a communality...

  7. Prediction of Banking Systemic Risk Based on Support Vector Machine

    Directory of Open Access Journals (Sweden)

    Shouwei Li

    2013-01-01

    Full Text Available Banking systemic risk is a complex nonlinear phenomenon and has shed light on the importance of safeguarding financial stability by recent financial crisis. According to the complex nonlinear characteristics of banking systemic risk, in this paper we apply support vector machine (SVM to the prediction of banking systemic risk in an attempt to suggest a new model with better explanatory power and stability. We conduct a case study of an SVM-based prediction model for Chinese banking systemic risk and find the experiment results showing that support vector machine is an efficient method in such case.

  8. Fault-Tolerant Onboard Monitoring and Decision Support Systems

    DEFF Research Database (Denmark)

    Lajic, Zoran

    a crude and simple estimation of the actual sea state (Hs and Tz), information about the longitudinal hull girder loading, seakeeping performance of the ship, and decision support on how to operate the ship within acceptable limits. The system is able to identify critical forthcoming events and to give...... advice regarding speed and course changes to decrease the wave-induced loads. The SeaSense system is based on the combined use of a mathematical model and measurements from a set of sensors. The overall dependability of a shipboard monitoring and decision support system such as the SeaSense system can...

  9. Ca and Sr isotope records support ocean acidification during end-Permian mass extinction

    Science.gov (United States)

    Wang, J.; Jacobson, A. D.; Zhang, H.; Ramezani, J.; Sageman, B. B.; Hurtgen, M.; Bowring, S. A.; Shen, S.

    2017-12-01

    The end-Permian mass extinction represents the most devastating loss of biodiversity during the Phanerozoic. A negative carbon isotope (δ13C) excursion that accompanies the event suggests a significant perturbation to the global carbon cycle, likely induced by CO2 emissions during eruption of the Siberian Traps large igneous province. The carbon cycle is linked with the Ca and Sr cycles through chemical weathering and carbonate precipitation. Therefore, analyses of Ca (δ44/40Ca), radiogenic Sr (87Sr/86Sr), and stable Sr (δ88/86Sr) isotope abundance variations in marine carbonate rocks spanning the Permian-Triassic Boundary (PTB) can reveal key information about biogeochemical changes that occurred during this time. We report δ44/40Ca, 87Sr/86Sr, and δ88/86Sr records analyzed by TIMS for the Meishan and Dajiang sections in China. δ44/40Ca values exhibit similar patterns in both sections. The values remain unchanged across the extinction event layer (EXT) and then decrease by 0.20‰ before increasing by 0.20‰ to 0.40‰ around the PTB. In the Meishan section, 87Sr/86Sr ratios increase after the EXT and return to pre-excursion levels by the PTB. Simultaneously, δ88/86Sr values decrease by 0.12‰ across the EXT and increase by 0.08‰ by the PTB. The patterns of our data support the hypothesis that elevated atmospheric CO2 levels enhanced chemical weathering inputs and might have caused transient ocean acidification, with an "alkalinity overshoot" and increased carbonate deposition occurring after the extinction. Additional measurements and model calculations are underway to help refine and improve these preliminary interpretations.

  10. ARCHITECTURE SOFTWARE SOLUTION TO SUPPORT AND DOCUMENT MANAGEMENT QUALITY SYSTEM

    Directory of Open Access Journals (Sweden)

    Milan Eric

    2010-12-01

    Full Text Available One of the basis of a series of standards JUS ISO 9000 is quality system documentation. An architecture of the quality system documentation depends on the complexity of business system. An establishment of an efficient management documentation of system of quality is of a great importance for the business system, as well as in the phase of introducing the quality system and in further stages of its improvement. The study describes the architecture and capability of software solutions to support and manage the quality system documentation in accordance with the requirements of standards ISO 9001:2001, ISO 14001:2005 HACCP etc.

  11. LOKI: a practical modelling and support system for telepresence systems

    International Nuclear Information System (INIS)

    Griffin, M.; Bridgewater, C.E.

    1993-01-01

    The use of Virtual Reality headset systems, in combination with a tele-presence ''head'' is discussed. The system is attached to a Unimate Puma robot arm and manipulated by the operator, using information gathered by the camera and auditory system, displayed via the Virtual Reality helmet. Operator commands are cross checked by using a modelling system, held on the Virtual Reality system. This system was found to supply a good sense of spacial awareness of the robot's domain. Actions which might move the robot outside its suitable operating envelope, or create a collision with the environment, were successfully blocked. This approach is seen as useful within the area of tele-operation. (author)

  12. Municipal solid waste management system: decision support through systems analysis

    OpenAIRE

    Pires, Ana Lúcia Lourenço

    2010-01-01

    Thesis submitted to the Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia for the degree of Doctor of Philosophy in Environmental Engineering The present study intends to show the development of systems analysis model applied to solid waste management system, applied into AMARSUL, a solid waste management system responsible for the management of municipal solid waste produced in Setúbal peninsula, Portugal. The model developed intended to promote sustainable decision making, ...

  13. Pipe support for use in a nuclear system

    International Nuclear Information System (INIS)

    Pollono, L.P.; Mello, R.M.

    1976-01-01

    Description is given of a vertical pipe support system. It comprises a tubular pipe support structure having the same inside diameter and the same wall thickness as the pipe, the pipe support structure having a generally triangularly shaped extension formed integral with and extending circumferentially around its outward side, the bottom side of this extension generally forming a ledge; an annular load-bearing insulation formed adjacent to the extension; means for clamping the load-bearing insulation to extension; and means for providing constant vertical support to means for clamping [fr

  14. Research on mass transfer and actual performance of the membrane regeneration air-conditioning system

    International Nuclear Information System (INIS)

    Li, Xiu-Wei; Zhang, Xiao-Song; Chen, Qing

    2015-01-01

    Highlights: • Experimental research has been made on the membrane air-conditioning system. • We develop mass transfer models for the membrane regeneration process. • The paper exposes the actual performance of the system. • Increase of membrane pairs improves the performance. - Abstract: Absorption air-conditioning system has great advantages in energy conservation and environmental protection. To improve the performance of the traditional system, the membrane regeneration absorption system was proposed. Its COP could approach 6 by regenerating absorbent solution with the ion exchange membranes. However, the theoretical conclusion has not been supported by the experiment. This paper presents the experimental research of the membrane regeneration process. It has investigated the mass transfer process, energy efficiency and actual performance under different working conditions. Based on that, a mass transfer model has been developed and the influences of some key parameters have been exposed. It found the regeneration performance is mainly influenced by the current intensity. The calculation results with the model agree well the experimental data. The actual efficiency was lower than 50%, caused by energy loss in heat and electrochemical reactions. The actual COP is between 1 and 3, lower current intensity and more membrane pairs could improve it.

  15. Customer Decision Support Systems: Resources for Student Decision Making

    Directory of Open Access Journals (Sweden)

    Cara Okleshen Peters, Ph.D.

    2005-07-01

    Full Text Available This paper highlights the potential of customer decision support systems (CDSS to assist students in education-related decision making. Faculty can use these resources to more effectively advise students on various elements of college life, while students can employ them to more actively participate in their own learning and improve their academic experience. This conceptual paper summarizes consumer decision support systems (CDSS concepts and presents exemplar websites students could utilize to support their education-related decision making. Finally, the authors discuss the potential benefits and drawbacks such resources engender from a student perspective and conclude with directions for future research.

  16. Intelligent Decision Support System for Bank Loans Risk Classification

    Institute of Scientific and Technical Information of China (English)

    杨保安; 马云飞; 俞莲

    2001-01-01

    Intelligent Decision Support System (IISS) for Bank Loans Risk Classification (BLRC), based on the way of integration Artificial Neural Network (ANN) and Expert System (ES), is proposed. According to the feature of BLRC, the key financial and non-financial factors are analyzed. Meanwhile, ES and Model Base (MB) which contain ANN are designed . The general framework,interaction and integration of the system are given. In addition, how the system realizes BLRC is elucidated in detail.

  17. Decisions at hand: a decision support system on handhelds.

    Science.gov (United States)

    Zupan, B; Porenta, A; Vidmar, G; Aoki, N; Bratko, I; Beck, J R

    2001-01-01

    One of the applications of clinical information systems is decision support. Although the advantages of utilizing such aids have never been theoretically disputed, they have been rarely used in practice. The factor that probably often limits the utility of clinical decision support systems is the need for computing power at the very site of decision making--at the place where the patient is interviewed, in discussion rooms, etc. The paper reports on a possible solution to this problem. A decision-support shell LogReg is presented, which runs on a handheld computer. A general schema for handheld-based decision support is also proposed, where decision models are developed on personal computers/workstations, encoded in XML and then transferred to handhelds, where the models are used within a decision support shell. A use case where LogReg has been applied to clinical outcome prediction in crush injury is presented.

  18. Evolution of Decision Support Systems Research Field in Numbers

    Directory of Open Access Journals (Sweden)

    Ana-Maria SUDUC

    2010-01-01

    Full Text Available The scientific production in a certain field shows, in great extent, the research interests in that field. Decision Support Systems are a particular class of information systems which are gaining more popularity in various domains. In order to identify the evolution in time of the publications number, authors, subjects, publications in the Decision Support Systems (DSS field, and therefore the scientific world interest for this field, in November 2010 there have been organized a series of queries on three major international scientific databases: ScienceDirect, IEEE Xplore Digital Library and ACM Digital Library. The results presented in this paper shows that, even the decision support systems research field started in 1960s, the interests for this type of systems grew exponentially with each year in the last decades.

  19. Web-Based Group Decision Support System: an Economic Application

    Directory of Open Access Journals (Sweden)

    Ion ISTUDOR

    2010-01-01

    Full Text Available Decision Support Systems (DSS form a specific class of computerized information systems that support business and managerial decision-making activities. Making the right decision in business primarily depends on the quality of data. It also depends on the ability to analyze the data with a view to identifying trends that can suggest solutions and strategies. A “cooperative” decision support system means the data are collected, analyzed and then provided to a human agent who can help the system to revise or refine the data. It means that both a human component and computer component work together to come up with the best solution. This paper describes the usage of a software product (Vanguard System to a specific economic application (evaluating the financial risk assuming that the rate of the economic profitability can be under the value of the interest rate.

  20. MPI support in the DIRAC Pilot Job Workload Management System

    International Nuclear Information System (INIS)

    Tsaregorodtsev, A; Hamar, V

    2012-01-01

    Parallel job execution in the grid environment using MPI technology presents a number of challenges for the sites providing this support. Multiple flavors of the MPI libraries, shared working directories required by certain applications, special settings for the batch systems make the MPI support difficult for the site managers. On the other hand the workload management systems with Pilot Jobs became ubiquitous although the support for the MPI applications in the Pilot frameworks was not available. This support was recently added in the DIRAC Project in the context of the GISELA Latin American Grid Initiative. Special services for dynamic allocation of virtual computer pools on the grid sites were developed in order to deploy MPI rings corresponding to the requirements of the jobs in the central task queue of the DIRAC Workload Management System. Pilot Jobs using user space file system techniques install the required MPI software automatically. The same technique is used to emulate shared working directories for the parallel MPI processes. This makes it possible to execute MPI jobs even on the sites not supporting them officially. Reusing so constructed MPI rings for execution of a series of parallel jobs increases dramatically their efficiency and turnaround. In this contribution we describe the design and implementation of the DIRAC MPI Service as well as its support for various types of MPI libraries. Advantages of coupling the MPI support with the Pilot frameworks are outlined and examples of usage with real applications are presented.

  1. Design of mass flow rate measurement system for SST-1 superconducting magnet system

    Energy Technology Data Exchange (ETDEWEB)

    Varmora, P., E-mail: pvamora@ipr.res.in; Sharma, A.N.; Khristi, Y.; Prasad, U.; Patel, D.; Doshi, K.; Pradhan, S.

    2016-11-15

    Highlights: • Design of Venturi meter for SST-1 magnet system. • Details of Helium mass flow measurement system used in SST-1. • Instruments and measurement techniques for flow measurement. • VME based data acquisition system details and flow calculation and results from SST-1 campaigns. - Abstract: Superconducting Magnet System (SCMS) of Steady State Superconducting Tokamak – 1 (SST-1) is forced-flow cooled by a closed cycle 1.3 kW (at 4.5 K) class Helium Refrigerator cum Liquefier (HRL) system. An accurate measurement of helium mass flow rate in different coils is required to ensure the uniform cooling of the cold mass in the entire range of operating temperature (300 K to 4.5 K) and pressure (0.9–0.4 MPa). To meet this requirement, indigenously designed and fabricated venturi meters are installed on 27 different coils of SST-1 SCMS. A VME based Data Acquisition System (DAS) has been developed and used to acquire the flow measurement data from different flowmeters. The details of the design of venturi meter, its different measurement and signal conditioning components, the data acquisition system and the mass flow rate calculation method are described in this paper. The mass flow rate measurement data from cryogenic acceptance and SST-1 magnet commissioning experiments are also presented and discussed in this paper.

  2. Design of mass flow rate measurement system for SST-1 superconducting magnet system

    International Nuclear Information System (INIS)

    Varmora, P.; Sharma, A.N.; Khristi, Y.; Prasad, U.; Patel, D.; Doshi, K.; Pradhan, S.

    2016-01-01

    Highlights: • Design of Venturi meter for SST-1 magnet system. • Details of Helium mass flow measurement system used in SST-1. • Instruments and measurement techniques for flow measurement. • VME based data acquisition system details and flow calculation and results from SST-1 campaigns. - Abstract: Superconducting Magnet System (SCMS) of Steady State Superconducting Tokamak – 1 (SST-1) is forced-flow cooled by a closed cycle 1.3 kW (at 4.5 K) class Helium Refrigerator cum Liquefier (HRL) system. An accurate measurement of helium mass flow rate in different coils is required to ensure the uniform cooling of the cold mass in the entire range of operating temperature (300 K to 4.5 K) and pressure (0.9–0.4 MPa). To meet this requirement, indigenously designed and fabricated venturi meters are installed on 27 different coils of SST-1 SCMS. A VME based Data Acquisition System (DAS) has been developed and used to acquire the flow measurement data from different flowmeters. The details of the design of venturi meter, its different measurement and signal conditioning components, the data acquisition system and the mass flow rate calculation method are described in this paper. The mass flow rate measurement data from cryogenic acceptance and SST-1 magnet commissioning experiments are also presented and discussed in this paper.

  3. A new scenario based approach for designing driver support systems applied to the design of a lane change support system

    NARCIS (Netherlands)

    Tideman, M.; Voort, M.C. van der; Arem, B. van

    2008-01-01

    Designing a new driver support system that meets the expectations of drivers is a difficult and time-consuming process. Despite the availability of various types of design support, it has essentially remained a process in which designers are forced to make assumptions about what other people want.

  4. A new scenario based approach for designing driver support systems applied to the design of a lane change support system

    NARCIS (Netherlands)

    Tideman, Martijn; van der Voort, Mascha C.; van Arem, Bart

    2010-01-01

    Designing a new driver support system that meets the expectations of drivers is a difficult and time-consuming process. Despite the availability of various types of design support, it has essentially remained a process in which designers are forced to make assumptions about what other people want.

  5. Computerised decision support systems for healthcare professionals: an interpretative review.

    Science.gov (United States)

    Cresswell, Kathrin; Majeed, Azeem; Bates, David W; Sheikh, Aziz

    2012-01-01

    Computerised decision support systems are designed to support clinicians in making decisions and thereby enhance the quality and safety of care. We aimed to undertake an interpretative review of the empirical evidence on computerised decision support systems, their contexts of use, and summarise evidence on the effectiveness of these tools and insights into how these can be successfully implemented and adopted. We systematically searched the empirical literature to identify systematic literature reviews on computerised decision support applications and their impact on the quality and safety of healthcare delivery over a 13-year period (1997-2010). The databases searched included: MEDLINE, EMBASE, The Cochrane Database of Systematic Reviews, Database of Abstracts of Reviews of Effects, The Cochrane Central Register of Controlled Trials, The Cochrane Methodology Register, The Health Technology Assessment Database, and The National Health Service (NHS) Economic Evaluation Database. To be eligible for inclusion, systematic reviews needed to address computerised decision support systems, and at least one of the following: impact on safety; quality; or organisational, implementation or adoption considerations. Our searches yielded 121 systematic reviews relating to eHealth, of which we identified 41 as investigating computerised decision support systems. These indicated that, whilst there was a lack of investigating potential risks, such tools can result in improvements in practitioner performance in the promotion of preventive care and guideline adherence, particularly if specific information is available in real time and systems are effectively integrated into clinical workflows. However, the evidence regarding impact on patient outcomes was less clear-cut with reviews finding either no, inconsistent or modest benefits. Whilst the potential of clinical decision support systems in improving, in particular, practitioner performance is considerable, such technology may

  6. Cytogenetic support for primacy prostatic cancer in a patient presenting with a soft tissue mass in the leg

    NARCIS (Netherlands)

    Molenaar, WM; Stoepker, MEJ; deRuiter, AJ; Hoekstra, HJ; vandenBerg, E

    A 65-year-old man presented with a soft tissue mass in the leg, clinically suspect of a sarcoma. Histologic examination suggested a metastatic adenocarcinoma of the prostate, which could not be confirmed by immunohistologic studies. However, cytogenetic analysis strongly supported this diagnosis. A

  7. Vertical dynamics of a single-span beam subjected to moving mass-suspended payload system with variable speeds

    Science.gov (United States)

    He, Wei

    2018-03-01

    This paper presents the vertical dynamics of a simply supported Euler-Bernoulli beam subjected to a moving mass-suspended payload system of variable velocities. A planar theoretical model of the moving mass-suspended payload system of variable speeds is developed based on several assumptions: the rope is massless and rigid, and its length keeps constant; the stiffness of the gantry beam is much greater than the supporting beam, and the gantry beam can be treated as a mass particle traveling along the supporting beam; the supporting beam is assumed as a simply supported Bernoulli-Euler beam. The model can be degenerated to consider two classical cases-the moving mass case and the moving payload case. The proposed model is verified using both numerical and experimental methods. To further investigate the effect of possible influential factors, numerical examples are conducted covering a range of parameters, such as variable speeds (acceleration or deceleration), mass ratios of the payload to the total moving load, and the pendulum lengths. The effect of beam flexibility on swing response of the payload is also investigated. It is shown that the effect of a variable speed is significant for the deflections of the beam. The accelerating movement tends to induce larger beam deflections, while the decelerating movement smaller ones. For accelerating or decelerating movements, the moving mass model may underestimate the deflections of the beam compared with the presented model; while for uniform motion, both the moving mass model and the moving mass-payload model lead to same beam responses. Furthermore, it is observed that the swing response of the payload is not sensitive to the stiffness of the beam for operational cases of a moving crane, thus a simple moving payload model can be employed in the swing control of the payload.

  8. Regulation of lean mass, bone mass, and exercise tolerance by the central melanocortin system.

    Directory of Open Access Journals (Sweden)

    Theodore P Braun

    Full Text Available Signaling via the type 4-melanocortin receptor (MC4R is an important determinant of body weight in mice and humans, where loss of function mutations lead to significant obesity. Humans with mutations in the MC4R experience an increase in lean mass. However, the simultaneous accrual of fat mass in such individuals may contribute to this effect via mechanical loading. We therefore examined the relationship of fat mass and lean mass in mice lacking the type-4 melanocortin receptor (MC4RKO. We demonstrate that MC4RKO mice display increased lean body mass. Further, this is not dependent on changes in adipose mass, as MC4RKO mice possess more lean body mass than diet-induced obese (DIO wild type mice with equivalent fat mass. To examine potential sources of the increased lean mass in MC4RKO mice, bone mass and strength were examined in MC4RKO mice. Both parameters increase with age in MC4RKO mice, which likely contributes to increases in lean body mass. We functionally characterized the increased lean mass in MC4RKO mice by examining their capacity for treadmill running. MC4R deficiency results in a decrease in exercise performance. No changes in the ratio of oxidative to glycolytic fibers were seen, however MC4RKO mice demonstrate a significantly reduced heart rate, which may underlie their impaired exercise performance. The reduced exercise capacity we report in the MC4RKO mouse has potential clinical ramifications, as efforts to control body weight in humans with melanocortin deficiency may be ineffective due to poor tolerance for physical activity.

  9. Preliminary study of the space adaptation of the MELiSSA life support system

    Science.gov (United States)

    Mas-Albaigès, Joan L.; Duatis, Jordi; Podhajsky, Sandra; Guirado, Víctor; Poughon, Laurent

    MELiSSA (Micro-Ecological Life Support System Alternative) is an European Space Agency (ESA) project focused on the development of a closed regenerative life support system to aid the development of technologies for future life support systems for long term manned planetary missions, e.g. a lunar base or missions to Mars. In order to understand the potential evolution of the MELiSSA concept towards its future use in the referred manned planetary mission context the MELiSSA Space Adaptation (MSA) activity has been undertaken. MSA's main objective is to model the different MELiSSA compartments using EcosimPro R , a specialized simulation tool for life support applications, in order to define a preliminary MELiSSA implementation for service in a man-tended lunar base scenario, with a four-member crew rotating in six-month increments, and performing the basic LSS functions of air revitalization, food production, and waste and water recycling. The MELiSSA EcosimPro R Model features a dedicated library for the different MELiSSA elements (bioreactors, greenhouse, crew, interconnecting elements, etc.). It is used to dimension the MELiSSA system in terms of major parameters like mass, volume and energy needs, evaluate the accuracy of the results and define the strategy for a progressive loop closure from the initial required performance (approx.100 The MELiSSA configuration(s) obtained through the EcosimPro R simulation are further analysed using the Advanced Life Support System Evaluation (ALISSE) metric, relying on mass, energy, efficiency, human risk, system reliability and crew time, for trade-off and optimization of results. The outcome of the MSA activity is, thus, a potential Life Support System architecture description, based on combined MELiSSA and other physico-chemical technologies, defining its expected performance, associated operational conditions and logistic needs.

  10. Decision Support System for Hepatitis Disease Diagnosis using Bayesian Network

    Directory of Open Access Journals (Sweden)

    Shamshad Lakho

    2017-12-01

    Full Text Available Medical judgments are tough and challenging as the decisions are often based on the deficient and ambiguous information. Moreover, the result of decision process has direct effects on human lives. The act of human decision declines in emergency situations due to the complication, time limit, and high risks. Therefore, provision of medical diagnosis plays a dynamic role, specifically in the preliminary stage when a physician has limited diagnosis experience and identifies the directions to be taken for the treatment process. Computerized Decision Support Systems have brought a revolution in the medical diagnosis. These automatic systems support the diagnosticians in the course of diagnosis. The major role of Decision Support Systems is to support the medical personnel in decision-making procedures regarding disease diagnosis and treatment recommendation. The proposed system provides easy support in Hepatitis disease recognition. The system is developed using the Bayesian network model. The physician provides the input to the system in the form of symptoms stated by the patient. These signs and symptoms match with the casual relationships present in the knowledge model. The Bayesian network infers conclusion from the knowledge model and calculates the probability of occurrence of Hepatitis B, C and D disorders.

  11. Software Application for Supporting the Education of Database Systems

    Science.gov (United States)

    Vágner, Anikó

    2015-01-01

    The article introduces an application which supports the education of database systems, particularly the teaching of SQL and PL/SQL in Oracle Database Management System environment. The application has two parts, one is the database schema and its content, and the other is a C# application. The schema is to administrate and store the tasks and the…

  12. Revisiting the dose calculation methodologies in European decision support systems

    DEFF Research Database (Denmark)

    Andersson, Kasper Grann; Roos, Per; Hou, Xiaolin

    2012-01-01

    The paper presents examples of current needs for improvement and extended applicability of the European decision support systems. The systems were originally created for prediction of the radiological consequences of accidents at nuclear installations. They could however also be of great value in...... for, to introduce new knowledge and thereby improve prognoses....

  13. An intelligent operator support system for dynamic positioning

    NARCIS (Netherlands)

    Diggelen, J. van; Broek, J. van den; Schraagen, J.M.C.; Waa, J.S. van der

    2018-01-01

    This paper proposes a human-centered approach to Dynamic Position-ing systems which combines multiple technologies in an intelligent operator sup-port system (IOSS). IOSS allows the operator to be roaming and do other tasks in quiet conditions. When conditions become more demanding, the IOSS calls

  14. Information Systems to Support Surveillance for Malaria Elimination

    Science.gov (United States)

    Ohrt, Colin; Roberts, Kathryn W.; Sturrock, Hugh J. W.; Wegbreit, Jennifer; Lee, Bruce Y.; Gosling, Roly D.

    2015-01-01

    Robust and responsive surveillance systems are critical for malaria elimination. The ideal information system that supports malaria elimination includes: rapid and complete case reporting, incorporation of related data, such as census or health survey information, central data storage and management, automated and expert data analysis, and customized outputs and feedback that lead to timely and targeted responses. Spatial information enhances such a system, ensuring cases are tracked and mapped over time. Data sharing and coordination across borders are vital and new technologies can improve data speed, accuracy, and quality. Parts of this ideal information system exist and are in use, but have yet to be linked together coherently. Malaria elimination programs should support the implementation and refinement of information systems to support surveillance and response and ensure political and financial commitment to maintain the systems and the human resources needed to run them. National malaria programs should strive to improve the access and utility of these information systems and establish cross-border data sharing mechanisms through the use of standard indicators for malaria surveillance. Ultimately, investment in the information technologies that support a timely and targeted surveillance and response system is essential for malaria elimination. PMID:26013378

  15. A Textual Case-Based Mobile Phone Diagnosis Support System ...

    African Journals Online (AJOL)

    In this paper, a Mobile Phone Diagnosis Support System is presented as an extension to jCOLIBRI which accepts a problem and reasons with cases to provide a solution related to a new given problem. Experimental evaluation using some set of problems shows that the developed system predicts the solution that is ...

  16. Information systems to support surveillance for malaria elimination.

    Science.gov (United States)

    Ohrt, Colin; Roberts, Kathryn W; Sturrock, Hugh J W; Wegbreit, Jennifer; Lee, Bruce Y; Gosling, Roly D

    2015-07-01

    Robust and responsive surveillance systems are critical for malaria elimination. The ideal information system that supports malaria elimination includes: rapid and complete case reporting, incorporation of related data, such as census or health survey information, central data storage and management, automated and expert data analysis, and customized outputs and feedback that lead to timely and targeted responses. Spatial information enhances such a system, ensuring cases are tracked and mapped over time. Data sharing and coordination across borders are vital and new technologies can improve data speed, accuracy, and quality. Parts of this ideal information system exist and are in use, but have yet to be linked together coherently. Malaria elimination programs should support the implementation and refinement of information systems to support surveillance and response and ensure political and financial commitment to maintain the systems and the human resources needed to run them. National malaria programs should strive to improve the access and utility of these information systems and establish cross-border data sharing mechanisms through the use of standard indicators for malaria surveillance. Ultimately, investment in the information technologies that support a timely and targeted surveillance and response system is essential for malaria elimination. © The American Society of Tropical Medicine and Hygiene.

  17. [Habitability and biological life support systems for man].

    Science.gov (United States)

    Gazenko, O G; Grigor'ev, A I; Meleshko, G I; Shepelev, E Ia

    1990-01-01

    This paper discusses general concepts and specific details of the habitability of space stations and planetary bases completely isolated from the Earth for long periods of time. It emphasizes inadequacy of the present-day knowledge about natural conditions that provide a biologically acceptable environment on the Earth as well as lack of information about life support systems as a source of consumables (oxygen, water, food) and a tool for waste management. The habitability of advanced space vehicles is closely related to closed bioregenerative systems used as life support systems.

  18. AN EXPERT SYSTEM FOR SUPPORTING THE PRODUCTION OF PLEASURE BOATS

    Directory of Open Access Journals (Sweden)

    Tomasz GONCIARZ

    2013-07-01

    Full Text Available Expert systems can be defined as computer programs, whose main task is to simulate a human expert, usually in a narrow field of expertise. Possible applications of modern information technology are very extensive, ranging from medicine, geology and technology to applications in the field of economic and financial decision support. The purpose of this paper is to present the practical application of an expert system that supports the process of managing the production of yachts and has a high suitability for use in this application. Using the expert system described in the paper reduces the time during the design and production preparation process.

  19. Considering Intermittent Dormancy in an Advanced Life Support Systems Architecture

    Science.gov (United States)

    Sargusingh, Miriam J.; Perry, Jay L.

    2017-01-01

    Many advanced human space exploration missions being considered by the National Aeronautics and Space Administration (NASA) include concepts in which in-space systems cycle between inhabited and uninhabited states. Managing the life support system (LSS) may be particularly challenged during these periods of intermittent dormancy. A study to identify LSS management challenges and considerations relating to dormancy is described. The study seeks to define concepts suitable for addressing intermittent dormancy states and to evaluate whether the reference LSS architectures being considered by the Advanced Exploration Systems (AES) Life Support Systems Project (LSSP) are sufficient to support this operational state. The primary focus of the study is the mission concept considered to be the most challenging-a crewed Mars mission with an extensive surface stay. Results from this study are presented and discussed.

  20. Unmanned systems to support the human exploration of Mars

    Science.gov (United States)

    Gage, Douglas W.

    2010-04-01

    Robots and other unmanned systems will play many critical roles in support of a human presence on Mars, including surveying candidate landing sites, locating ice and mineral resources, establishing power and other infrastructure, performing construction tasks, and transporting equipment and supplies. Many of these systems will require much more strength and power than exploration rovers. The presence of humans on Mars will permit proactive maintenance and repair, and allow teleoperation and operator intervention, supporting multiple dynamic levels of autonomy, so the critical challenges to the use of unmanned systems will occur before humans arrive on Mars. Nevertheless, installed communications and navigation infrastructure should be able to support structured and/or repetitive operations (such as excavation, drilling, or construction) within a "familiar" area with an acceptable level of remote operator intervention. This paper discusses some of the factors involved in developing and deploying unmanned systems to make humans' time on Mars safer and more productive, efficient, and enjoyable.

  1. User's manual of a support system for human reliability analysis

    International Nuclear Information System (INIS)

    Yokobayashi, Masao; Tamura, Kazuo.

    1995-10-01

    Many kinds of human reliability analysis (HRA) methods have been developed. However, users are required to be skillful so as to use them, and also required complicated works such as drawing event tree (ET) and calculation of uncertainty bounds. Moreover, each method is not so complete that only one method of them is not enough to evaluate human reliability. Therefore, a personal computer (PC) based support system for HRA has been developed to execute HRA practically and efficiently. The system consists of two methods, namely, simple method and detailed one. The former uses ASEP that is a simplified THERP-technique, and combined method of OAT and HRA-ET/DeBDA is used for the latter. Users can select a suitable method for their purpose. Human error probability (HEP) data were collected and a database of them was built to use for the support system. This paper describes outline of the HRA methods, support functions and user's guide of the system. (author)

  2. Classification of nuclear power plant operator support systems

    International Nuclear Information System (INIS)

    Alpeev, A.S.

    1994-01-01

    The objective of this survey was to examine the general characteristics of modern nuclear power plant process monitoring/control systems and to apply developing technology (intellectual automation) in order to improve the man-machine interface. The support systems that implement each phase of the control function...information, assessment, decision-making, and implementation...were discussed, and where applicable, intellectual automation was applied to the support system. It was concluded that the application of intellectual automation, as well as other (undefined) possibilities for improving the man-machine interface, would relieve the operator of many routine activities and allow him to readily apply high potential to those poorly-formalized scenarios in which the operator's work can't be automated. It was also concluded that the development of such support systems would not be without problems, i.e. software certification, traning, and jurisdictional questions

  3. A Lunar Surface System Supportability Technology Development Roadmap

    Science.gov (United States)

    Oeftering, Richard C.; Struk, Peter M.; Taleghani, barmac K.

    2011-01-01

    This paper discusses the establishment of a Supportability Technology Development Roadmap as a guide for developing capabilities intended to allow NASA s Constellation program to enable a supportable, sustainable and affordable exploration of the Moon and Mars. Presented is a discussion of supportability, in terms of space facility maintenance, repair and related logistics and a comparison of how lunar outpost supportability differs from the International Space Station. Supportability lessons learned from NASA and Department of Defense experience and their impact on a future lunar outpost is discussed. A supportability concept for future missions to the Moon and Mars that involves a transition from a highly logistics dependent to a logistically independent operation is discussed. Lunar outpost supportability capability needs are summarized and a supportability technology development strategy is established. The resulting Lunar Surface Systems Supportability Strategy defines general criteria that will be used to select technologies that will enable future flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. This strategy also introduces the concept of exploiting flight hardware as a supportability resource. The technology roadmap involves development of three mutually supporting technology categories, Diagnostics Test and Verification, Maintenance and Repair, and Scavenging and Recycling. The technology roadmap establishes two distinct technology types, "Embedded" and "Process" technologies, with different implementation and thus different criteria and development approaches. The supportability technology roadmap addresses the technology readiness level, and estimated development schedule for technology groups that includes down-selection decision gates that correlate with the lunar program milestones. The resulting supportability technology roadmap is intended to develop a set

  4. Integrated training support system for PWR operator training simulator

    International Nuclear Information System (INIS)

    Sakaguchi, Junichi; Komatsu, Yasuki

    1999-01-01

    The importance of operator training using operator training simulator has been recognized intensively. Since 1986, we have been developing and providing many PWR simulators in Japan. We also have developed some training support systems connected with the simulator and the integrated training support system to improve training effect and to reduce instructor's workload. This paper describes the concept and the effect of the integrated training support system and of the following sub-systems. We have PES (Performance Enhancement System) that evaluates training performance automatically by analyzing many plant parameters and operation data. It can reduce the deviation of training performance evaluation between instructors. PEL (Parameter and Event data Logging system), that is the subset of PES, has some data-logging functions. And we also have TPES (Team Performance Enhancement System) that is used aiming to improve trainees' ability for communication between operators. Trainee can have conversation with virtual trainees that TPES plays automatically. After that, TPES automatically display some advice to be improved. RVD (Reactor coolant system Visual Display) displays the distributed hydraulic-thermal condition of the reactor coolant system in real-time graphically. It can make trainees understand the inside plant condition in more detail. These sub-systems have been used in a training center and have contributed the improvement of operator training and have gained in popularity. (author)

  5. Neonatal and pediatric regionalized systems in pediatric emergency mass critical care.

    Science.gov (United States)

    Barfield, Wanda D; Krug, Steven E; Kanter, Robert K; Gausche-Hill, Marianne; Brantley, Mary D; Chung, Sarita; Kissoon, Niranjan

    2011-11-01

    Improved health outcomes are associated with neonatal and pediatric critical care in well-organized, cohesive, regionalized systems that are prepared to support and rehabilitate critically ill victims of a mass casualty event. However, present systems lack adequate surge capacity for neonatal and pediatric mass critical care. In this document, we outline the present reality and suggest alternative approaches. In May 2008, the Task Force for Mass Critical Care published guidance on provision of mass critical care to adults. Acknowledging that the critical care needs of children during disasters were unaddressed by this effort, a 17-member Steering Committee, assembled by the Oak Ridge Institute for Science and Education with guidance from members of the American Academy of Pediatrics, convened in April 2009 to determine priority topic areas for pediatric emergency mass critical care recommendations.Steering Committee members established subcommittees by topic area and performed literature reviews of MEDLINE and Ovid databases. The Steering Committee produced draft outlines through consensus-based study of the literature and convened October 6-7, 2009, in New York, NY, to review and revise each outline. Eight draft documents were subsequently developed from the revised outlines as well as through searches of MEDLINE updated through March 2010.The Pediatric Emergency Mass Critical Care Task Force, composed of 36 experts from diverse public health, medical, and disaster response fields, convened in Atlanta, GA, on March 29-30, 2010. Feedback on each manuscript was compiled and the Steering Committee revised each document to reflect expert input in addition to the most current medical literature. States and regions (facilitated by federal partners) should review current emergency operations and devise appropriate plans to address the population-based needs of infants and children in large-scale disasters. Action at the state, regional, and federal levels should address

  6. The mass balance of production and consumption: Supporting policy-makers for aquatic food security

    Science.gov (United States)

    Lopes, A. S.; Ferreira, J. G.; Vale, C.; Johansen, J.

    2017-03-01

    This work addresses divergences between data on consumption and availability for wild-caught and farmed fish, and normalisation of reported production data, to support integrated fisheries and aquaculture management. The methodologies developed, centred on improved parameterisation and on mass balance closure, were tested in two case studies: (i) the cod fishery in Europe, with particular emphasis on Iceland and the United Kingdom; and (ii) the overall balance of aquatic products for Portugal, the ICES member with the most diverse range of landed marine species. Data for consumption, Illegal, Unreported, or Unregulated (IUU) catch, and official availability statistics were used to identify discrepancies between consumption and official availability data. The identification of discrepancies between supply and demand, when coupled with source-discriminated data, showed a pattern where products with no unmet demand tend to display a considerable IUU percentage-above 9% in three cases (hake, sardine, and horse mackerel). By contrast with fished products with an over-met demand such as cod (144%) and sardine (124%), farmed species display low Optimal Consumption Level (OCL) satisfaction. Atlantic salmon, gilthead seabream, and European seabass register 45%, 58% and 44% respectively; this suggests a considerable unmet demand for these products and/or a high volume of undeclared fish reaching consumers, which may be due to the lack of landings control that exists for wild-caught fish. Improvements to production estimates using live-weight coefficients illustrate the impacts of seafood processing. Different processing methods can generate variations in live-weight estimates, leading to errors in officially reported data, and expose the limitations of the current statistical methods. As an example, the corrected per capita consumption for Portugal for 2014 (the latest FAO data) increases from 57 to 66 kg ind-1 y-1, which places the country as the second-greatest consumer in

  7. Development of the bedridden person support system using hand gesture.

    Science.gov (United States)

    Ichimura, Kouhei; Magatani, Kazushige

    2015-08-01

    The purpose of this study is to support the bedridden and physically handicapped person who live independently. In this study, we developed Electric appliances control system that can be used on the bed. The subject can control Electric appliances using hand motion. Infrared sensors of a Kinect are used for the hand motion detection. Our developed system was tested with some normal subjects and results of the experiment were evaluated. In this experiment, all subjects laid on the bed and tried to control our system. As results, most of subjects were able to control our developed system perfectly. However, motion tracking of some subject's hand was reset forcibly. It was difficult for these subjects to make the system recognize his opened hand. From these results, we think if this problem will be improved our support system will be useful for the bedridden and physically handicapped persons.

  8. The VISTA ZYJHKs photometric system: calibration from 2MASS

    Science.gov (United States)

    González-Fernández, C.; Hodgkin, S. T.; Irwin, M. J.; González-Solares, E.; Koposov, S. E.; Lewis, J. R.; Emerson, J. P.; Hewett, P. C.; Yoldaş, A. K.; Riello, M.

    2018-03-01

    In this paper, we describe the routine photometric calibration of data taken with the VISTA infrared camera (VIRCAM) instrument on the ESO Visible and Infrared Survey Telescope for Astronomy (VISTA) telescope. The broad-band ZYJHKs data are directly calibrated from Two Micron all Sky Survey (2MASS) point sources visible in every VISTA image. We present the empirical transformations between the 2MASS and VISTA, and Wide-Field Camera and VISTA, photometric systems for regions of low reddening. We investigate the long-term performance of VISTA+VIRCAM. An investigation of the dependence of the photometric calibration on interstellar reddening leads to these conclusions: (1) For all broad-band filters, a linear colour-dependent correction compensates the gross effects of reddening where E(B - V) < 5.0. (2) For Z and Y, there is a significantly larger scatter above E(B - V) = 5.0, and insufficient measurements to adequately constrain the relation beyond this value. (3) The JHKs filters can be corrected to a few per cent up to E(B - V) = 10.0. We analyse spatial systematics over month-long time-scales, both inter- and intradetector and show that these are present only at very low levels in VISTA. We monitor and remove residual detector-to-detector offsets. We compare the calibration of the main pipeline products: pawprints and tiles. We show how variable seeing and transparency affect the final calibration accuracy of VISTA tiles, and discuss a technique, grouting, for mitigating these effects. Comparison between repeated reference fields is used to demonstrate that the VISTA photometry is precise to better than ≃ 2 per cent for the YJHKs bands and 3 per cent for the Z bands. Finally, we present empirically determined offsets to transform VISTA magnitudes into a true Vega system.

  9. The design of intelligent support systems for nuclear reactor operators

    International Nuclear Information System (INIS)

    Bernard, J.A.

    1992-01-01

    This paper identifies factors relevant to the design of intelligent support systems and their use for the provision of real-time diagnostic information. As such, it constitutes a followup to the state-of-the-art review that was previously published by Bernard and Washio on the utilization of expert systems within the nuclear industry. Some major differences between intelligent-support tools and conventional expert systems are enumerated. In summary, conventional expert systems that encode experimental knowledge in production rules are not suitable vehicle for the creation of operator support systems. The principal difficulty is the need for real-time operation. This in turn means that intelligent support systems will have knowledge bases derived from temporally accurate plant models, inference engines that permit revisions in the search process to accommodate revised data, and man-machine interfaces that do not require any human input. Such systems will be heavily instrumented, and the associated knowledge bases will require a hierarchical organization to emulate human approaches to analysis

  10. Damage Evaluation of Critical Components of Tilted Support Spring Nonlinear System under a Rectangular Pulse

    Directory of Open Access Journals (Sweden)

    Ningning Duan

    2015-01-01

    Full Text Available Dimensionless nonlinear dynamical equations of a tilted support spring nonlinear packaging system with critical components were obtained under a rectangular pulse. To evaluate the damage characteristics of shocks to packaged products with critical components, a concept of the damage boundary surface was presented and applied to a titled support spring system, with the dimensionless critical acceleration of the system, the dimensionless critical velocity, and the frequency parameter ratio of the system taken as the three basic parameters. Based on the numerical results, the effects of the frequency parameter ratio, the mass ratio, the dimensionless peak pulse acceleration, the angle of the system, and the damping ratio on the damage boundary surface of critical components were discussed. It was demonstrated that with the increase of the frequency parameter ratio, the decrease of the angle, and/or the increase of the mass ratio, the safety zone of critical components can be broadened, and increasing the dimensionless peak pulse acceleration or the damping ratio may lead to a decrease of the damage zone for critical components. The results may lead to a thorough understanding of the design principles for the tilted support spring nonlinear system.

  11. Physics design of fissile mass-flow monitoring system

    International Nuclear Information System (INIS)

    Mattingly, J.K.; March-Leuba, J.; Valentine, T.E.; Mihalczo, J.T.; Uckan, T.

    1997-01-01

    The system measures the flow rate and uranium-235 content in liquid or gas streams; it does not penetrate the process piping. A moderated fission neutron source is used to periodicially introduce a burst of thermal neutrons into the fluid stream to induce fission; delayed gamma emissions from the resulting fission fragments are detected by high-efficiency scintillators downstream of the neutron source. The fluid flow rate is measure from the time between initiation of the thermal neutron burst and detection of the fission product gamma emissions, and the U-235 content is inferred from the intensity of the gamma burst detected. Design of the fissile mass flow monitor requires satisfaction of several competing constraints. Efficient operation of the monitor requires that source-induced fission rate and detection efficiency be maximized while the source-induced background rate is simultaneoulsy minimized. Near optical nuclear design of the system was achieved using numerous Monte Carlo calculations and measurements. This paper addresses calculational aspects of the physics design for the system applied to UF 6 gas

  12. Accelerator mass spectrometry with a coupled tandem-linac system

    International Nuclear Information System (INIS)

    Kutschera, W.

    1984-01-01

    A coupled system provides higher energies, which allows one to extend AMS to hitherto untouched mass regions. Another important argument is that the complexity, although bothersome for the operation, increases the selectivity of detecting a particular isotope. The higher-energy argument holds for any heavy-ion accelerator which is capable of delivering higher energy than a tandem. The present use of tandem-linac combinations for AMS, rather than cyclotrons, linacs or combinations of these machines, has mainly to do with the fact that this technique was almost exclusively developed around tandem accelerators. Therefore the tandem-linac combination is a natural extension to higher energies. The use of negative ions has some particular advantages in suppressing background from unwanted elements that do not form stable negative ions (e.g., N, Mg, Ar). On the other hand, this limits the detection of isotopes to elements which do form negative ions. For particular problems it may therefore be advantageous to use a positive-ion machine. What really matters most for choosing one or the other machine is to what extent the entire accelerator system can be operated in a truly quantiative way from the ion source to the detection system. 20 references, 4 figures

  13. Position-dependent mass, finite-gap systems, and supersymmetry

    Science.gov (United States)

    Bravo, Rafael; Plyushchay, Mikhail S.

    2016-05-01

    The ordering problem in quantum systems with position-dependent mass (PDM) is treated by inclusion of the classically fictitious similarity transformation into the kinetic term. This provides a generation of supersymmetry with the first-order supercharges from the kinetic term alone, while inclusion of the potential term allows us also to generate nonlinear supersymmetry with higher-order supercharges. A broad class of finite-gap systems with PDM is obtained by different reduction procedures, and general results on supersymmetry generation are applied to them. We show that elliptic finite-gap systems of Lamé and Darboux-Treibich-Verdier types can be obtained by reduction to Seiffert's spherical spiral and Bernoulli lemniscate in the presence of Calogero-like or harmonic oscillator potentials, or by angular momentum reduction of a free motion on some AdS2 -related surfaces in the presence of Aharonov-Bohm flux. The limiting cases include the Higgs and Mathews-Lakshmanan oscillator models as well as a reflectionless model with PDM exploited recently in the discussion of cosmological inflationary scenarios.

  14. A Mechanized Decision Support System for Academic Scheduling.

    Science.gov (United States)

    1986-03-01

    an operational system called software. The first step in the development phase is Design . Designers destribute software control by factoring the Data...SUBJECT TERMS (Continue on reverse if necessary and identify by block number) ELD GROUP SUB-GROUP Scheduling, Decision Support System , Software Design ...scheduling system . It will also examine software - design techniques to identify the most appropriate method- ology for this problem. " - Chapter 3 will

  15. Relational Algebra in Spatial Decision Support Systems Ontologies.

    Science.gov (United States)

    Diomidous, Marianna; Chardalias, Kostis; Koutonias, Panagiotis; Magnita, Adrianna; Andrianopoulos, Charalampos; Zimeras, Stelios; Mechili, Enkeleint Aggelos

    2017-01-01

    Decision Support Systems (DSS) is a powerful tool, for facilitates researchers to choose the correct decision based on their final results. Especially in medical cases where doctors could use these systems, to overcome the problem with the clinical misunderstanding. Based on these systems, queries must be constructed based on the particular questions that doctors must answer. In this work, combination between questions and queries would be presented via relational algebra.

  16. Support system for loop device operator. Analysis of technological processes

    International Nuclear Information System (INIS)

    Yakovlev, V.V.; Mozhaev, A.A.; Lyadin, A.V.

    1988-01-01

    The paper presents the results obtained from the analysis of controlling the loops of a research reactor. A method of optimized interaction of the operator and hardware of the control system by computeraided identification of the cause of regime violation is considered. The equipment diagnostics based on use of the expert system methods and tuzzy algorithms enables to propose a support system for application in new generation of loops

  17. Determination of the System Mass and the Individual Masses of Pluto and Charon from New Horizons Radio Tracking

    Science.gov (United States)

    Hahn, M.; Paetzold, M.; Andert, T.; Bird, M. K.; Tyler, G. L.; Hinson, D. P.; Linscott, I.; Stern, A.; Weaver, H. A., Jr.; Young, L. A.; Ennico Smith, K.; Olkin, C.

    2016-12-01

    One objective of the New Horizons Radio Science Experiment REX is the direct determination of the system mass and the individual masses of Pluto and Charon. About four weeks of two-way radio tracking centered around the closest approach of New Horizons to the Pluto system were processed. Major problems during the processing were the changes in spacecraft attitude by thrusters which applied extra Δv to the spacecraft motion masking partially the continuously perturbed motion caused by the attracting forces of the Pluto system members. The times of the spacecraft thruster activity are known but the applied Δv magnitude needed to be specifically adjusted. No two-way tracking was available during the flyby day on 14th July but slots of the REX one-way uplink observations cover the most important time near closest approach, these are for example the Pluto and Charon Earth occultation entries and exits. The REX data during the flyby day allowed to extract the individual masses of Pluto and Charon from the system mass at high precision. The relative errors of the mass determinations are below 0.02% and 0.2%, respectively. The masses of the 4 small satellites in the Pluto system could not be resolved.

  18. Support mechanisms and risk: Implications on the Nordic electricity system

    DEFF Research Database (Denmark)

    Kitzing, Lena; Ravn, Hans

    2013-01-01

    a stochastic analysis for the Nordic electricity system by conducting simulations with the energy system model Balmorel and by applying the mean-standard deviation approach of modern portfolio theory to quantify risk implications of policy instruments for an exemplary offshore wind park. The analysis reveals......Investments in renewable energy projects, such as offshore wind parks, are very much dependent on financial support. The type of policy instrument chosen for such support determines investors' exposure to market risk, and thus influences which rate of return they expect to achieve. We make...... that the two support policy schemes Feed-in Tariffs and Feed-in Premiums provide different risk-return relationships. In the investigated case, a Feed-in Premium scheme would require a 13% higher support level, because of a 6% higher exposure of investors to market risk. Our findings can help when designing...

  19. A very high performance stabilization system for large mass bolometerexperiments

    Energy Technology Data Exchange (ETDEWEB)

    Arnaboldi, C. [Sezione INFN di Milano Bicocca, Piazza della Scienza 3, I-20126 Milano (Italy); Universita di Milano Bicocca, Piazza della Scienza 3, I-20126 Milano (Italy); Giachero, A., E-mail: Andrea.Giachero@mib.infn.it [Sezione INFN di Milano Bicocca, Piazza della Scienza 3, I-20126 Milano (Italy); Universita di Milano Bicocca, Piazza della Scienza 3, I-20126 Milano (Italy); Gotti, C. [Sezione INFN di Milano Bicocca, Piazza della Scienza 3, I-20126 Milano (Italy); Universita di Firenze, Dipartimento di Elettronica e Telecomunicazioni, Via S. Marta 3, I-50139 Firenze (Italy); Pessina, G. [Sezione INFN di Milano Bicocca, Piazza della Scienza 3, I-20126 Milano (Italy); Universita di Milano Bicocca, Piazza della Scienza 3, I-20126 Milano (Italy)

    2011-10-01

    CUORE is a large mass bolometric experiment, composed of 988 crystals, under construction in Hall A of the Gran Sasso Underground Laboratories (LNGS). Its main aim is the study of neutrinoless double beta decay of {sup 130}Te. Each bolometer is a 760 g crystal of Tellurium dioxide on which a Nuclear Transmutation Doped Ge thermistor, Ge NTD, is glued with proper thermal contact. The stability of the system is mandatory over many years of data taking. To accomplish this requirement a heating resistor is glued on each detector across which a voltage pulse can be injected at will, to develop a known calibrated heating power. We present the design solution for a pulse generator system to be used for the injection of such a small and short voltage pulse across the heaters. This system is composed by different custom PCB boards each of them having multi-channel independent outputs completely remotely programmable from the acquisition system, in pulse width and amplitude, through an on-board ARM7 microcontroller. Pulse amplitudes must be selectable, in order to handle each detector on its full dynamic range. The resolution of the output voltage is 12 bits over 10 V range. An additional 4 steps programmable voltage attenuator is added at every output. The width of any pulse can range from 100{mu}s to 25.5 ms. The main features of the final system are: stability and precision in pulses generation (at the level of less than a ppm/{sup o}C), low cost (thanks to the use of commercial components) and compact implementation.

  20. AN INCREASE IN THE MASS OF PLANETARY SYSTEMS AROUND LOWER-MASS STARS

    Energy Technology Data Exchange (ETDEWEB)

    Mulders, Gijs D.; Pascucci, Ilaria; Apai, Dániel, E-mail: mulders@lpl.arizona.edu [Lunar and Planetary Laboratory, The University of Arizona, Tucson, AZ 85721 (United States)

    2015-12-01

    Trends in the planet population with host star mass provide an avenue to constrain planet formation theories. We derive the planet radius distribution function for Kepler stars of different spectral types, sampling a range in host star masses. We find that M dwarf stars have 3.5 times more small planets (1.0–2.8 R{sub ⨁}) than main-sequence FGK stars, but two times fewer Neptune-sized and larger (>2.8 R{sub ⨁}) planets. We find no systematic trend in the planet size distribution between spectral types F, G, and K to explain the increasing occurrence rates. Taking into account the mass–radius relationship and heavy-element mass of observed exoplanets, and assuming those are independent of spectral type, we derive the inventory of the heavy-element mass locked up in exoplanets at short orbits. The overall higher planet occurrence rates around M stars are not consistent with the redistribution of the same mass into more, smaller planets. At the orbital periods and planet radii where Kepler observations are complete for all spectral types, the average heavy-element mass locked up in exoplanets increases roughly inversely with stellar mass from 4 M{sub ⨁} in F stars to 5 M{sub ⨁} in G and K stars to 7 M{sub ⨁} in M stars. This trend stands in stark contrast with observed protoplanetary disk masses that decrease toward lower mass stars, and provides a challenge for current planet formation models. Neither models of in situ formation nor migration of fully formed planets are consistent with these results. Instead, these results are indicative of large-scale inward migration of planetary building blocks—either through type-I migration or radial drift of dust grains—that is more efficient for lower mass stars, but does not result in significantly larger or smaller planets.

  1. AN INCREASE IN THE MASS OF PLANETARY SYSTEMS AROUND LOWER-MASS STARS

    International Nuclear Information System (INIS)

    Mulders, Gijs D.; Pascucci, Ilaria; Apai, Dániel

    2015-01-01

    Trends in the planet population with host star mass provide an avenue to constrain planet formation theories. We derive the planet radius distribution function for Kepler stars of different spectral types, sampling a range in host star masses. We find that M dwarf stars have 3.5 times more small planets (1.0–2.8 R ⨁ ) than main-sequence FGK stars, but two times fewer Neptune-sized and larger (>2.8 R ⨁ ) planets. We find no systematic trend in the planet size distribution between spectral types F, G, and K to explain the increasing occurrence rates. Taking into account the mass–radius relationship and heavy-element mass of observed exoplanets, and assuming those are independent of spectral type, we derive the inventory of the heavy-element mass locked up in exoplanets at short orbits. The overall higher planet occurrence rates around M stars are not consistent with the redistribution of the same mass into more, smaller planets. At the orbital periods and planet radii where Kepler observations are complete for all spectral types, the average heavy-element mass locked up in exoplanets increases roughly inversely with stellar mass from 4 M ⨁ in F stars to 5 M ⨁ in G and K stars to 7 M ⨁ in M stars. This trend stands in stark contrast with observed protoplanetary disk masses that decrease toward lower mass stars, and provides a challenge for current planet formation models. Neither models of in situ formation nor migration of fully formed planets are consistent with these results. Instead, these results are indicative of large-scale inward migration of planetary building blocks—either through type-I migration or radial drift of dust grains—that is more efficient for lower mass stars, but does not result in significantly larger or smaller planets

  2. Marketing Decision Making and Decision Support: Challenges and Perspectives for Successful Marketing Management Support Systems

    NARCIS (Netherlands)

    G.H. van Bruggen (Gerrit); B. Wierenga (Berend)

    2009-01-01

    textabstractMarketing management support systems (MMSS) are computer-enabled devices that help marketers to make better decisions. Marketing processes can be quite complex, involving large numbers of variables and mostly outcomes are the results of the actions of many different stakeholders (e.g.,

  3. Comparison of multiple support excitation solution techniques for piping systems

    International Nuclear Information System (INIS)

    Sterkel, H.P.; Leimbach, K.R.

    1980-01-01

    Design and analysis of nuclear power plant piping systems exposed to a variety of dynamic loads often require multiple support excitation analysis by modal or direct time integration methods. Both methods have recently been implemented in the computer program KWUROHR for static and dynamic analysis of piping systems, following the previous implementation of the multiple support excitation response spectrum method (see papers K 6/15 and K 6/15a of the SMiRT-4 Conference). The results of multiple support excitation response spectrum analyses can be examined by carrying out the equivalent time history analyses which do not distort the time phase relationship between the excitations at different support points. A frequent point of discussion is multiple versus single support excitation. A single support excitation analysis is computationally straightforward and tends to be on the conservative side, as the numerical results show. A multiple support excitation analysis, however, does not incur much more additional computer cost than the expenditure for an initial static solution involving three times the number, L, of excitation levels, i.e. 3L static load cases. The results are more realistic than those from a single support excitation analysis. A number of typical nuclear plant piping systems have been analyzed using single and multiple support excitation algorithms for: (1) the response spectrum method, (2) the modal time history method via the Wilson, Newmark and Goldberg integration operators and (3) the direct time history method via the Wilson integration operator. Characteristic results are presented to compare the computational quality of all three methods. (orig.)

  4. Tactical decision making under stress (TADMUS) decision support system

    OpenAIRE

    Morrison, Jeffrey G.; Kelly, Richard T.; Moore, Ronald A.; Hutchins, Susan G.

    1996-01-01

    A prototype decision support system (DSS) was developed to enhance Navy tactical decision making based on naturalistic decision processes. Displays were developed to support critical decision making tasks through recognition-primed and explanation-based reasoning processes and cognitive analysis of the decision making problems faced by Navy tactical officers in a shipboard Combat Information Center. Baseline testing in high intensity, peace keeping, littoral scenarios indicated...

  5. Behavior-aware decision support systems : LDRD final report.

    Energy Technology Data Exchange (ETDEWEB)

    Hirsch, Gary B.; Homer, Jack (Homer Consulting); Chenoweth, Brooke N.; Backus, George A.; Strip, David R.

    2007-11-01

    As Sandia National Laboratories serves its mission to provide support for the security-related interests of the United States, it is faced with considering the behavioral responses that drive problems, mitigate interventions, or lead to unintended consequences. The effort described here expands earlier works in using healthcare simulation to develop behavior-aware decision support systems. This report focuses on using qualitative choice techniques and enhancing two analysis models developed in a sister project.

  6. Decision support system for containment and release management

    Energy Technology Data Exchange (ETDEWEB)

    Oosterhuis, B [Twente Univ., Enschede (Netherlands). Computer Science Dept.

    1995-09-01

    The Containment and Release Management project was carried out within the Reinforced Concerted Action Programme for Accident Management Support and partly financed by the European Union. In this report a prototype of an accident management support system is presented. The support system integrates several concepts from accident management research, like safety objective trees, severe accident phenomena, calculation models and an emergency response data system. These concepts are provided by the prototype in such a way that the decision making process of accident management is supported. The prototype application is demonstrated by process data taken from a severe accident scenario for a pressurized water reactor (PWR) that was simulated with the thermohydraulic computer program MAAP. The prototype was derived from a decision support framework based on a decision theory. For established and innovative concepts from accident management research it is pointed out in which way these concepts can support accident management and how these concepts can be integrated. This approach is generic in two ways; it applies to both pressurized and boiling water reactors and it applies to both in vessel management and containment and release management. The prototype application was developed in Multimedia Toolbox 3.0 and requires at least a 386 PC with 4 MB memory, 6 MB free disk space and MS Windows 3.1. (orig.).

  7. Decision support system for containment and release management

    International Nuclear Information System (INIS)

    Oosterhuis, B.

    1995-09-01

    The Containment and Release Management project was carried out within the Reinforced Concerted Action Programme for Accident Management Support and partly financed by the European Union. In this report a prototype of an accident management support system is presented. The support system integrates several concepts from accident management research, like safety objective trees, severe accident phenomena, calculation models and an emergency response data system. These concepts are provided by the prototype in such a way that the decision making process of accident management is supported. The prototype application is demonstrated by process data taken from a severe accident scenario for a pressurized water reactor (PWR) that was simulated with the thermohydraulic computer program MAAP. The prototype was derived from a decision support framework based on a decision theory. For established and innovative concepts from accident management research it is pointed out in which way these concepts can support accident management and how these concepts can be integrated. This approach is generic in two ways; it applies to both pressurized and boiling water reactors and it applies to both in vessel management and containment and release management. The prototype application was developed in Multimedia Toolbox 3.0 and requires at least a 386 PC with 4 MB memory, 6 MB free disk space and MS Windows 3.1. (orig.)

  8. RTEMS CENTRE- Support and Maintenance CENTRE to RTEMS Operating System

    Science.gov (United States)

    Silva, H.; Constantino, A.; Coutunho, M.; Freitas, D.; Faustino, S.; Mota, M.; Colaço, P.; Zulianello, M.

    2008-08-01

    RTEMS stands for Real-Time Operating System for Multiprocessor Systems. It is a full featured Real Time Operating System that supports a variety of open APIs and interface standards. It provides a high performance environment for embedded applications, including a fixed-priority preemptive/non-preemptive scheduler, a comprehensive set of multitasking operations and a large range of supported architectures. Support and maintenance CENTRE to RTEMS operating system (RTEMS CENTRE) is a joint initiative of ESA-Portugal Task force, aiming to build a strong technical competence in the space flight (on- board) software, to offer support, maintenance and improvements to RTEMS. This paper provides a high level description of the current and future activities of the RTEMS CENTRE. It presents a brief description of the RTEMS operating system, a description of the tools developed and distributed to the community [1] and the improvements to be made to the operating system, including facilitation for the qualification of RTEMS (4.8.0) [2] for the space missions.

  9. Portable, space-saving medical patient support system

    Science.gov (United States)

    Bzorgi,; Fariborz, [Knoxville, TN

    2011-02-01

    A support platform having a stowed configuration and a deployed configuration on a floor. The support platform is related to stretcher devices that are used for transporting, confining, or conducting medical procedures on medical patients in medical emergencies. The support platform typically includes a work surface that has a geometric extent. A base that typically includes a plurality of frame members is provided, and the frame members are disposed across the geometric extent of, and proximal to, the work surface in the stowed configuration. The frame members are typically disposed on the floor in the deployed configuration. There is a foldable bracing system engaged with the work surface and engaged with the base. At least a portion of the foldable bracing system is disposed substantially inside at least a portion of the plurality of frame members in the stowed configuration. Further, the foldable bracing system is configured for translocation of the work surface distal from the base in the deployed configuration.

  10. System for selecting relevant information for decision support.

    Science.gov (United States)

    Kalina, Jan; Seidl, Libor; Zvára, Karel; Grünfeldová, Hana; Slovák, Dalibor; Zvárová, Jana

    2013-01-01

    We implemented a prototype of a decision support system called SIR which has a form of a web-based classification service for diagnostic decision support. The system has the ability to select the most relevant variables and to learn a classification rule, which is guaranteed to be suitable also for high-dimensional measurements. The classification system can be useful for clinicians in primary care to support their decision-making tasks with relevant information extracted from any available clinical study. The implemented prototype was tested on a sample of patients in a cardiological study and performs an information extraction from a high-dimensional set containing both clinical and gene expression data.

  11. Gerotor and bearing system for whirling mass orbital vibrator

    Energy Technology Data Exchange (ETDEWEB)

    Brett, James Ford; Westermark, Robert Victor; Turner, Jr., Joey Earl; Lovin, Samuel Scott; Cole, Jack Howard; Myers, Will

    2007-02-27

    A gerotor and bearing apparatus for a whirling mass orbital vibrator which generates vibration in a borehole. The apparatus includes a gerotor with an inner gear rotated by a shaft having one less lobe than an outer gear. A whirling mass is attached to the shaft. At least one bearing is attached to the shaft so that the bearing engages at least one sleeve. A mechanism is provided to rotate the inner gear, the mass and the bearing in a selected rotational direction in order to cause the mass, the inner gear, and the bearing to backwards whirl in an opposite rotational direction. The backwards whirling mass creates seismic vibrations.

  12. Information security requirements in patient-centred healthcare support systems.

    Science.gov (United States)

    Alsalamah, Shada; Gray, W Alex; Hilton, Jeremy; Alsalamah, Hessah

    2013-01-01

    Enabling Patient-Centred (PC) care in modern healthcare requires the flow of medical information with the patient between different healthcare providers as they follow the patient's treatment plan. However, PC care threatens the stability of the balance of information security in the support systems since legacy systems fall short of attaining a security balance when sharing their information due to compromises made between its availability, integrity, and confidentiality. Results show that the main reason for this is that information security implementation in discrete legacy systems focused mainly on information confidentiality and integrity leaving availability a challenge in collaboration. Through an empirical study using domain analysis, observations, and interviews, this paper identifies a need for six information security requirements in legacy systems to cope with this situation in order to attain the security balance in systems supporting PC care implementation in modern healthcare.

  13. Structural support system for a superconducting magnet coil

    International Nuclear Information System (INIS)

    Meuser, R.B.

    1977-01-01

    The purpose of the ESCAR (Experimental Superconducting Accelerator Ring) project, now under way at the Lawrence Berkeley Laboratory, is to gather data and experience in the design and operation of a relatively small synchrotron employing superconducting magnets. Such data are essential to ensure that the design of future large accelerators may proceed in a knowledgeable and responsible manner. One of the many engineering problems associated with a superconducting magnet is the design of the coil suspension system. The coil, maintained at the temperature of liquid helium, must be held rigidly by a structure that does not conduct too much heat into the liquid helium system. The suspension system used on the ESCAR magnets is described. Topics covered include the coil support system requirements, ESCAR magnet support system, and operating experience

  14. Computational intelligence for decision support in cyber-physical systems

    CERN Document Server

    Ali, A; Riaz, Zahid

    2014-01-01

    This book is dedicated to applied computational intelligence and soft computing techniques with special reference to decision support in Cyber Physical Systems (CPS), where the physical as well as the communication segment of the networked entities interact with each other. The joint dynamics of such systems result in a complex combination of computers, software, networks and physical processes all combined to establish a process flow at system level. This volume provides the audience with an in-depth vision about how to ensure dependability, safety, security and efficiency in real time by making use of computational intelligence in various CPS applications ranging from the nano-world to large scale wide area systems of systems. Key application areas include healthcare, transportation, energy, process control and robotics where intelligent decision support has key significance in establishing dynamic, ever-changing and high confidence future technologies. A recommended text for graduate students and researche...

  15. ERP System Audit a Control Support For Knowledge Management

    Directory of Open Access Journals (Sweden)

    Traian SURCEL

    2008-01-01

    Full Text Available The ERP system supports most of the business system that maintains in a single database the data needed for a variety of business functions such as Manufacturing, SCM, Financials, Projects, Human Resources and CRM; the audit of this systems is necessary in order to give reasonable assurance to the company on its core system. Obtained evidence evaluation can ensure whether the organization's IT&C system safeguard assets, maintains data integrity, and is operating effectively and efficiently to achieve the organization's goals or objectives. The audit process respecting the methodology based on: gathering information and plan; obtaining an understanding of internal controls; performing test of controls and substantive tests, develop a control support on quality of flow of information and knowledge from formal perspective, for Knowledge Management in large enterprises.

  16. Solid-supported enzymatic synthesis of pectic oligogalacturonides and their analysis by MALDI-TOF mass spectrometry

    DEFF Research Database (Denmark)

    Guillaumie, Fanny; Sterling, J.D.; Jensen, K.J.

    2003-01-01

    Solid-phase biosynthetic reactions, followed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis (MALDI-TOF), was used to gain insight into the biosynthesis of pectin oligomers. Sepharose supports bearing long pectic oligogalacturonides (OGAs) anchored through...... into the liquid phases by MALDI-TOF mass spectrometry. In time course studies conducted with an immobilized (alpha-D-GalA)(14) and limiting amounts of the glycosyl donor, the predominant product was an OGA extended by one GalA residue at the non-reducing end (i.e., (GalA)(15)). When UDP-GalA was added...

  17. Strategy generator in computerized accident management support system

    International Nuclear Information System (INIS)

    Sirola, M.

    1994-02-01

    An increased interest for research in the field of accident management of nuclear power plants can be noted. Several international programmes have been started in order to be able to understand the basic physical and chemical phenomena in accident conditions. A feasibility study has shown that it would be possible to design and develop a computerized support system for plant staff in accident situations. To achieve this goal the Halden Project has initiated a research programme on Computerized Accident Management Support (CAMS project). The aim is to utilize the capabilities of computerized tools to support the plant staff during the various accident stages. The system will include identification of the accident state, assessment of the future development of the accident and planning of accident mitigation strategies. A prototype is developed to support operators and the Technical Support Centre in decision making during serious accidents in nuclear power plants. A rule based system has been built to take care of the strategy generation. This system assists plant personnel in planning control proposals and mitigation strategies from normal operation to severe accident conditions. The idea of a safety objective tree and knowledge from the emergency procedures have been used. Future prediction requires good state identification of the plant status and some knowledge about the history of some critical variables. The information needs to be validated as well. Accurate calculations in simulators and a large database including all important information from the plant will help the strategy planning. (orig.). (40 refs., 20 figs.)

  18. The systems psychodynamic experiences of organisational transformation amongst support staff

    Directory of Open Access Journals (Sweden)

    Martin Steyn

    2016-10-01

    Full Text Available Orientation: The unconscious impact of organisational transformation is often neglected and even denied. This research revealed the manifestation and impact of high levels and different forms of anxiety experienced by employees during transformation. Research objective: The objective was to study and describe the manifesting systems psychodynamic behaviour amongst support staff during organisational transformation. Motivation for the study: Organisational transformation is mostly researched from a leadership viewpoint. Little research data are available on the experiences of support staff on the receiving end of decisions about and implementation of transformation. Research design, approach and method: A qualitative approach within the phenomenological hermeneutic interpretive stance was used. The research was set in a government organisation. A semi-structured interview with four conveniently and purposefully chosen support staff members was thematically analysed using systems psychodynamics as theoretical paradigm. Main findings: Four themes manifested, namely de-authorisation and detachment, being bullied and seduced by leadership, the organisation in the mind as incompetent, and a dangerous and persecutory system. In the discussion, the basic assumptions and relevant constructs are interpreted. Practical implications: Understanding the transformation experiences of support staff could assist the industrial psychologist to facilitate appropriate support in coaching more junior staff towards increasing wellness and work performance. Contribution: Organisational transformation is highlighted as an anxiety provoking experience especially on the lower levels of the organisation. Its potentially deep and complex psychological impact could possibly derail parts of the system if not managed in a psychologically contained manner.

  19. MEMS mass-spring-damper systems using an out-of-plane suspension scheme

    KAUST Repository

    Abdel Aziz, Ahmed Kamal Said; Sharaf, Abdel Hameed; Serry, Mohamed Yousef; Sedky, Sherif Salah

    2014-01-01

    MEMS mass-spring-damper systems (including MEMS gyroscopes and accelerometers) using an out-of-plane (or vertical) suspension scheme, wherein the suspensions are normal to the proof mass, are disclosed. Such out-of-plane suspension scheme helps such MEMS mass-spring-damper systems achieve inertial grade performance. Methods of fabricating out-of-plane suspensions in MEMS mass-spring-damper systems (including MEMS gyroscopes and accelerometers) are also disclosed.

  20. MEMS mass-spring-damper systems using an out-of-plane suspension scheme

    KAUST Repository

    Abdel Aziz, Ahmed Kamal Said

    2014-02-04

    MEMS mass-spring-damper systems (including MEMS gyroscopes and accelerometers) using an out-of-plane (or vertical) suspension scheme, wherein the suspensions are normal to the proof mass, are disclosed. Such out-of-plane suspension scheme helps such MEMS mass-spring-damper systems achieve inertial grade performance. Methods of fabricating out-of-plane suspensions in MEMS mass-spring-damper systems (including MEMS gyroscopes and accelerometers) are also disclosed.

  1. Data warehouse based decision support system in nuclear power plants

    International Nuclear Information System (INIS)

    Nadinic, B.

    2004-01-01

    Safety is an important element in business decision making processes in nuclear power plants. Information about component reliability, structures and systems, data recorded during the nuclear power plant's operation and outage periods, as well as experiences from other power plants are located in different database systems throughout the power plant. It would be possible to create a decision support system which would collect data, transform it into a standardized form and store it in a single location in a format more suitable for analyses and knowledge discovery. This single location where the data would be stored would be a data warehouse. Such data warehouse based decision support system could help make decision making processes more efficient by providing more information about business processes and predicting possible consequences of different decisions. Two main functionalities in this decision support system would be an OLAP (On Line Analytical Processing) and a data mining system. An OLAP system would enable the users to perform fast, simple and efficient multidimensional analysis of existing data and identify trends. Data mining techniques and algorithms would help discover new, previously unknown information from the data as well as hidden dependencies between various parameters. Data mining would also enable analysts to create relevant prediction models that could predict behaviour of different systems during operation and inspection results during outages. The basic characteristics and theoretical foundations of such decision support system are described and the reasons for choosing a data warehouse as the underlying structure are explained. The article analyzes obvious business benefits of such system as well as potential uses of OLAP and data mining technologies. Possible implementation methodologies and problems that may arise, especially in the field of data integration, are discussed and analyzed.(author)

  2. Approach to Health Supporting System Using Traditional Chinese Medicine

    Science.gov (United States)

    Watsuji, Tadashi; Shinohara, Shoji; Arita, Seizaburo

    The primary prevention of disease related to the lifestyle is an essential theme in medical research. Preventing before it arises is the important concept in traditional Chinese medicine (TCM). Since TCM, which emphasizes individual physical condition in medical treatment, has recently attracted considerable attention globally, objective diagnostic methods in TCM have been investigated in this work. Firstly, the fuzzy theory was applied to develop a tongue diagnosis supporting system based on the tongue diagnosis in TCM. Secondly, the usefulness of TCM health questionnaire was examined to identify individual physical condition. Our results suggest that the TCM health questionnaire is useful in the construction of a health supporting system based on TCM.

  3. An information system supporting design for reliability and maintenance

    Energy Technology Data Exchange (ETDEWEB)

    Rit, J.F.; Beraud, M.T

    1997-12-31

    EDF is currently developing a methodology to integrate availability, operating experience and maintenance in the design of power plants. This involves studies that depend closely on the results and assumptions of each other about the reliability and operations of the plant. Therefore a support information system must be carefully designed. Concurrently with development of the methodology, a research oriented information system was designed and built. It is based on the database model of a logistic support repository that we tailored to our needs. (K.A.) 10 refs.

  4. An information system supporting design for reliability and maintenance

    International Nuclear Information System (INIS)

    Rit, J.F.; Beraud, M.T.

    1997-01-01

    EDF is currently developing a methodology to integrate availability, operating experience and maintenance in the design of power plants. This involves studies that depend closely on the results and assumptions of each other about the reliability and operations of the plant. Therefore a support information system must be carefully designed. Concurrently with development of the methodology, a research oriented information system was designed and built. It is based on the database model of a logistic support repository that we tailored to our needs. (K.A.)

  5. Seismic analysis of piping systems subjected to multiple support excitations

    International Nuclear Information System (INIS)

    Sundararajan, C.; Vaish, A.K.; Slagis, G.C.

    1981-01-01

    The paper presents the results of a comparative study between the multiple response spectrum method and the time-history method for the seismic analysis of nuclear piping systems subjected to different excitation at different supports or support groups. First, the necessary equations for the above analysis procedures are derived. Then, three actual nuclear piping systems subjected to single and multiple excitations are analyzed by the different methods, and extensive comparisons of the results (stresses) are made. Based on the results, it is concluded that the multiple response spectrum analysis gives acceptable results as compared to the ''exact'', but much more costly, time-history analysis. 6 refs

  6. Development of the decision make supporting system on incident management

    International Nuclear Information System (INIS)

    Kasamatsu, Mizuki; Hanada, Satoshi; Noda, Eisuke

    2017-01-01

    Decision Make Supporting System is designed to support appropriate decision made by top management in the nuclear severe conditions. With crisis response in nuclear power plant (NPP), information entanglement between sites and control centers during intense situations interfere with prompt and accurate decision making. This research started with that kind of background. In order to solve the issue of the information entanglement, Mitsubishi Heavy Industries, Inc. (MHI) carried out the development of the Decision Make Supporting System and the system applies the technology combining the human factors engineering (HFE) and information and communication technology (ICT). During the crisis response, various commands, reactions and communications in a human system need to be managed. Therefore, the combined HFE method including detailed task analysis, user experience (UX), graphic user interface (GUI) and related human-system interface (HSI) design method is applied to the design of the system. These design results systematize the functions that prevent interference with decision-making in the headquarters for incident management. This new solution as a system enhances the safety improvement of the NPP and contributes to develop the skills and abilities of the resources in the NPP. The system has three key features for supporting emergency situations: 'understanding the situation', 'planning the next action', and 'managing resources'. The system helps commanders and responders to grasp the whole situation and allows them to share information in real time to get a whole picture, and the system accumulates the data of the past events in the chronological order to understand correctly how they happened and plan the next action by using a knowledge database that MHI has been developed. If the unexpected event happens which are not in the incident scenario, the system provides support to formulate alternative strategies and measures. With this

  7. Multilingual Analysis of Twitter News in Support of Mass Emergency Events

    Science.gov (United States)

    Zielinski, A.; Bügel, U.; Middleton, L.; Middleton, S. E.; Tokarchuk, L.; Watson, K.; Chaves, F.

    2012-04-01

    Social media are increasingly becoming an additional source of information for event-based early warning systems in the sense that they can help to detect natural crises and support crisis management during or after disasters. Within the European FP7 TRIDEC project we study the problem of analyzing multilingual twitter feeds for emergency events. Specifically, we consider tsunami and earthquakes, as one possible originating cause of tsunami, and propose to analyze twitter messages for capturing testified information at affected points of interest in order to obtain a better picture of the actual situation. For tsunami, these could be the so called Forecast Points, i.e. agreed-upon points chosen by the Regional Tsunami Warning Centers (RTWC) and the potentially affected countries, which must be considered when calculating expected tsunami arrival times. Generally, local civil protection authorities and the population are likely to respond in their native languages. Therefore, the present work focuses on English as "lingua franca" and on under-resourced Mediterranean languages in endangered zones, particularly in Turkey, Greece, and Romania. We investigated ten earthquake events and defined four language-specific classifiers that can be used to detect natural crisis events by filtering out irrelevant messages that do not relate to the event. Preliminary results indicate that such a filter has the potential to support earthquake detection and could be integrated into seismographic sensor networks. One hindrance in our study is the lack of geo-located data for asserting the geographical origin of the tweets and thus to be able to observe correlations of events across languages. One way to overcome this deficit consists in identifying geographic names contained in tweets that correspond to or which are located in the vicinity of specific points-of-interest such as the forecast points of the tsunami scenario. We also intend to use twitter analysis for situation picture

  8. Field Support System (FS-AID) and Working Capital Fund Tracking System (WCF-TS)

    Data.gov (United States)

    US Agency for International Development — The Field Support System (FS-AID) and Working Capital Fund Tracking System (WCF-TS) are two modules of a single data management system that share common tables and...

  9. Alternate seismic support for pipeline systems in nuclear power plants

    International Nuclear Information System (INIS)

    Muthumani, K.; Gopalakrishnan, N.; Sathish Kumar, K.; Sreekala, R.; Rama Rao, G.V.; Reddy, G.R.; Parulekar, Y.M.

    2008-01-01

    Failure free design of supporting systems for pipe lines carrying highly toxic or radioactive liquids at very high temperature is an important issue in the safety aspect for a nuclear power plant installation which is a key topic for researchers all around the world. Generally, these pipeline systems are designed to be held rigid by conventional snubber supports for protection from earthquakes. The piping design must balance seismic deformations and other deformations due to thermal effect. A rigid pipeline system using conventional snubber supports always leads to an increase in thermal stresses; hence a rational seismic design for pipeline supporting systems becomes essential. Contrary to this rigid design, it is possible to design a flexible pipeline system and to decrease the seismic response by increasing the damping through the use of passive energy absorbing elements, which dissipate vibration energy. This paper presents the experimental and analytical studies carried out on modeling yielding type elasto-plastic passive energy-absorbing elements to be used in a passive energy-dissipating device for the control of large seismic deformations of pipelines subjected to earthquake loading. (author)

  10. Refurbishment of the IEAR1 primary coolant system piping supports

    International Nuclear Information System (INIS)

    Fainer, Gerson; Faloppa, Altair A.; Oliveira, Carlos A. de; Mattar Neto, Miguel

    2015-01-01

    A partial replacement of the IEA-R1 piping system was concluded in 2014. This paper presents the study and the structural analysis of the IEA-R1 primary circuit piping supports, considering all the changes involved in the replacement. The IEA-R1 is a nuclear reactor for research purposes designed by Babcox-Willcox that is operated by IPEN since 1957. The reactor life management and modernization program is being conducted for the last two decades and already resulted in a series of changes, especially on the reactor coolant system. This set of components, divided in primary and secondary circuit, is responsible for the circulation of water into the core to remove heat. In the ageing management program that includes regular inspection, some degradation was observed in the primary piping system. As result, the renewing of the piping system was conducted in 2014. Moreover the poor condition of some original piping supports gave rise to the refurbishment of all piping supports. The aim of the present work is to review the design of the primary system piping supports taking into account the current conditions after the changes and refurbishment. (author)

  11. Space Station Environmental Control/Life Support System engineering

    Science.gov (United States)

    Miller, C. W.; Heppner, D. B.

    1985-01-01

    The present paper is concerned with a systems engineering study which has provided an understanding of the overall Space Station ECLSS (Environmental Control and Life Support System). ECLSS/functional partitioning is considered along with function criticality, technology alternatives, a technology description, single thread systems, Space Station architectures, ECLSS distribution, mechanical schematics per space station, and Space Station ECLSS characteristics. Attention is given to trade studies and system synergism. The Space Station functional description had been defined by NASA. The ECLSS will utilize technologies which embody regenerative concepts to minimize the use of expendables.

  12. Methodology and Supporting Toolset Advancing Embedded Systems Quality

    DEFF Research Database (Denmark)

    Berger, Michael Stübert; Soler, José; Brewka, Lukasz Jerzy

    2013-01-01

    Software quality is of primary importance in the development of embedded systems that are often used in safety-critical applications. Moreover, as the life cycle of embedded products becomes increasingly tighter, productivity and quality are simultaneously required and closely interrelated towards...... delivering competitive products. In this context, the MODUS (Methodology and supporting toolset advancing embedded systems quality) project aims to provide a pragmatic and viable solution that will allow SMEs to substantially improve their positioning in the embedded-systems development market. This paper...... will describe the MODUS project with focus on the technical methodologies that will be developed advancing embedded system quality....

  13. Application of Lattice Boltzmann Methods in Complex Mass Transfer Systems

    Science.gov (United States)

    Sun, Ning

    Lattice Boltzmann Method (LBM) is a novel computational fluid dynamics method that can easily handle complex and dynamic boundaries, couple local or interfacial interactions/reactions, and be easily parallelized allowing for simulation of large systems. While most of the current studies in LBM mainly focus on fluid dynamics, however, the inherent power of this method makes it an ideal candidate for the study of mass transfer systems involving complex/dynamic microstructures and local reactions. In this thesis, LBM is introduced to be an alternative computational method for the study of electrochemical energy storage systems (Li-ion batteries (LIBs) and electric double layer capacitors (EDLCs)) and transdermal drug design on mesoscopic scale. Based on traditional LBM, the following in-depth studies have been carried out: (1) For EDLCs, the simulation of diffuse charge dynamics is carried out for both the charge and the discharge processes on 2D systems of complex random electrode geometries (pure random, random spheres and random fibers). Steric effect of concentrated solutions is considered by using modified Poisson-Nernst-Plank (MPNP) equations and compared with regular Poisson-Nernst-Plank (PNP) systems. The effects of electrode microstructures (electrode density, electrode filler morphology, filler size, etc.) on the net charge distribution and charge/discharge time are studied in detail. The influence of applied potential during discharging process is also discussed. (2) For the study of dendrite formation on the anode of LIBs, it is shown that the Lattice Boltzmann model can capture all the experimentally observed features of microstructure evolution at the anode, from smooth to mossy to dendritic. The mechanism of dendrite formation process in mesoscopic scale is discussed in detail and compared with the traditional Sand's time theories. It shows that dendrite formation is closely related to the inhomogeneous reactively at the electrode-electrolyte interface

  14. Separations technologies supporting the development of a deployable ATW system

    International Nuclear Information System (INIS)

    Laidler, J. J.

    2000-01-01

    A program has been initiated for the purpose of developing the chemical separations technologies necessary to support a large Accelerator Transmutation of Waste (ATW) system capable of dealing with the projected inventory of spent fuel from the commercial nuclear power stations in the United States. The first several years of the program will be directed toward an elucidation of related technical issues and to the establishment, by means of comprehensive trade studies, of an optimum configuration of the elements of the chemical processing infrastructure required for support of the total ATW system. By adopting this sort of disciplined systems engineering approach, it is expected that development and demonstration costs can be minimized and that it will be possible to deploy an ATW system that is an environmentally sound and economically viable venture

  15. Study on the Support Systems for Corporate Governance

    Directory of Open Access Journals (Sweden)

    Claudiu BRANDAS

    2011-01-01

    Full Text Available The problems generated by the information asymmetry within the agency relationships at corporation level, governments and capital markets led to a higher necessity for corporate governance (CG. The information system of corporate governance is a very complex one, which involves a series of actors, decision-making and transactional processes, technologies, procedures and good practice codes. In order to ensure the efficiency and efficacy of corporate governance as a premise for increasing company’s performance and position consolidation for the company on the capital market, it is necessary to analyze the way information technology could contribute to this undertaking. The purpose of this study is to analyze the architecture of the corporate governance systems and to identify and classify the systems and technologies involved in ensuring CG support in order to underlie the basis for developing a conceptual model for a hybrid and collaborative support system for corporate governance.

  16. Group decision support system for customer-driven product design

    Science.gov (United States)

    Lin, Zhihang; Chen, Hang; Chen, Kuen; Che, Ada

    2000-10-01

    This paper describes the work on the development of a group decision support system for customer driven product design. The customer driven is to develop products, which meet all customer requirements in whole life cycle of products. A process model of decision during product primary design is proposed to formulate the structured, semi-structured and unstructured decision problems. The framework for the decision support system is presented that integrated both advances in the group decision making and distributed artificial intelligent. The system consists of the product primary design tool kit and the collaborative platform with multi-agent structure. The collaborative platform of the system and the product primary design tool kit, including the VOC (Voice of Customer) tool, QFD (Quality Function Deployment) tool, the Conceptual design tool, Reliability analysis tool and the cost and profit forecasting tool, are indicated.

  17. Alternate design of ITER cryostat skirt support system

    International Nuclear Information System (INIS)

    Pandey, Manish Kumar; Gupta, Girish Kumar; Bhardwaj, Anil Kumar; Jha, Saroj Kumar

    2015-01-01

    The skirt support of ITER cryostat is a support system which takes all the load of cryostat cylinder and dome during normal and operational condition. The present design of skirt support has full penetration weld joints at the bottom (shell to horizontal plate joint). To fulfill the requirements of tolerances and control the welding distortions, we have proposed to change the full penetration weld into fillet weld. A detail calculation is done to check the feasibility and structural impact due to proposed design. The calculations provide the size requirements of fillet weld. To verify the structural integrity during most severe load case, finite element analysis (FEA) has been done in line with ASME section VIII division 2. By FEA 'Plastic Collapse' and 'Local Failure' modes has been assessed. 5° sector of skirt clamp has been modeled in CATIA V5 R21 and used in FEA. Fillet weld at shell to horizontal plate joint has been modeled and symmetry boundary condition at ± 2.5° applied. 'Elastic Plastic Analysis' has been performed for the most severe loading case i.e. Category IV loading. The alternate design of Cryostat Skirt support system has been found safe by analysis against Plastic collapse and Local Failure Modes with load proportionality factor 2.3. Alternate design of Cryostat skirt support system has been done and validated by FEA. As per alternate design, the proposal of fillet weld has been implemented in manufacturing. (author)

  18. Computerised decision support systems for healthcare professionals: an interpretative review

    Directory of Open Access Journals (Sweden)

    Kathrin Cresswell

    2013-03-01

    Full Text Available Purpose Computerised decision support systems are designed to support clinicians in making decisions and thereby enhance the quality and safety of care. We aimed to undertake an interpretative review of the empirical evidence on computerised decision support systems, their contexts of use, and summarise evidence on the effectiveness of these tools and insights into how these can be successfully implemented and adopted.Methods We systematically searched the empirical literature to identify systematic literature reviews on computerised decision support applications and their impact on the quality and safety of healthcare delivery over a 13-year period (1997–2010. The databases searched included: MEDLINE, EMBASE, The Cochrane Database of Systematic Reviews, Database of Abstracts of Reviews of Effects, The Cochrane Central Register of Controlled Trials, The Cochrane Methodology Register, The Health Technology Assessment Database, and The National Health Service (NHS Economic Evaluation Database. To be eligible for inclusion, systematic reviews needed to address computerised decision support systems, and at least one of the following: impact on safety; quality; or organisational, implementation or adoption considerations.Results Our searches yielded 121 systematic reviews relating to eHealth, of which we identified 41 as investigating computerised decision support systems. These indicated that, whilst there was a lack of investigating potential risks, such tools can result in improvements in practitioner performance in the promotion of preventive care and guideline adherence, particularly if specific information is available in real time and systems are effectively integrated into clinical workflows. However, the evidence regarding impact on patient outcomes was less clear-cut with reviews finding either no, inconsistent or modest benefits.Conclusions Whilst the potential of clinical decision support systems in improving, in particular

  19. [Knowledge management system for laboratory work and clinical decision support].

    Science.gov (United States)

    Inada, Masanori; Sato, Mayumi; Yoneyama, Akiko

    2011-05-01

    This paper discusses a knowledge management system for clinical laboratories. In the clinical laboratory of Toranomon Hospital, we receive about 20 questions relevant to laboratory tests per day from medical doctors or co-medical staff. These questions mostly involve the essence to appropriately accomplish laboratory tests. We have to answer them carefully and suitably because an incorrect answer may cause a medical accident. Up to now, no method has been in place to achieve a rapid response and standardized answers. For this reason, the laboratory staff have responded to various questions based on their individual knowledge. We began to develop a knowledge management system to promote the knowledge of staff working for the laboratory. This system is a type of knowledge base for assisting the work, such as inquiry management, laboratory consultation, process management, and clinical support. It consists of several functions: guiding laboratory test information, managing inquiries from medical staff, reporting results of patient consultation, distributing laboratory staffs notes, and recording guidelines for laboratory medicine. The laboratory test information guide has 2,000 records of medical test information registered in the database with flexible retrieval. The inquiry management tool provides a methos to record all questions, answer easily, and retrieve cases. It helps staff to respond appropriately in a short period of time. The consulting report system treats patients' claims regarding medical tests. The laboratory staffs notes enter a file management system so they can be accessed to aid in clinical support. Knowledge sharing using this function can achieve the transition from individual to organizational learning. Storing guidelines for laboratory medicine will support EBM. Finally, it is expected that this system will support intellectual activity concerning laboratory work and contribute to the practice of knowledge management for clinical work support.

  20. An Open Challenge Problem Repository for Systems Supporting Binders

    OpenAIRE

    Felty, A.; Momigliano, A.; Pientka, B.

    2015-01-01

    A variety of logical frameworks support the use of higher-order abstract syntax in representing formal systems; however, each system has its own set of benchmarks. Even worse, general proof assistants that provide special libraries for dealing with binders offer a very limited evaluation of such libraries, and the examples given often do not exercise and stress-test key aspects that arise in the presence of binders. In this paper we design an open repository ORBI (Open challenge problem Repo...

  1. Initial results for compressive sensing in electronic support receiver systems

    CSIR Research Space (South Africa)

    Du Plessis, WP

    2011-04-01

    Full Text Available determined by the antenna and microwave system comprising the transmitter and receiver, while the instantaneous bandwidth is mainly determined by the Analog-to-Digital Converter (ADC) in the receiver. A radar can thus operate at any frequency within its... Electronic/Electromagnetic Support Measures (ESM) was used historically [1], [2]. Modern ES receiver systems are based on digital receivers allowing powerful signal processing techniques to be used [3], [4]. Recent developments in sampling technology...

  2. Controlled Ecological Life Support System Breadboard Project - 1988

    Science.gov (United States)

    Knott, W. M.

    1989-01-01

    The Controlled Ecological Life Support System (CELSS) Breadboard Project, NASA's effort to develop the technology required to produce a functioning bioregenerative system, is discussed. The different phases of the project and its current status are described. The relationship between the project components are shown, and major project activities for fiscal years 1989-1993 are listed. The biomass production chamber to be used by the project is described.

  3. Controlled ecological life support system breadboard project, 1988

    Science.gov (United States)

    Knott, W. M.

    1990-01-01

    The Closed Ecological Life Support System (CELSS) Breadboard Project, NASA's effort to develop the technology required to produce a functioning bioregenerative system, is discussed. The different phases of the project and its current status are described. The relationship between the project components are shown, and major project activities for fiscal years 1989 to 1993 are listed. The Biomass Production Chamber (BPC) became operational and tests of wheat as a single crop are nearing completion.

  4. Food chain data customization for decision support systems in Austria

    Energy Technology Data Exchange (ETDEWEB)

    Gert, Sdouz; Manfred, Pachole [ARC Seibersdorf research, Seibersdorf (Austria)

    2006-07-01

    In the case of a nuclear accident in Europe the integral decision support system R.O.D.O.S. ( real-time on-line decision support system for off-site emergency management) supplies comprehensive information on the present and future radiological situation, and the consequences of measures to protect the population. These data comprise mainly map information such as population distribution, rivers, roads, vegetation areas and production data of various food products. This work concentrates on the customization of the data for the food chain and dose module for terrestrial pathways. During the last fifteen years two different codes have been used in Austria for support during accidents with radioactive releases: O.E.C.O.S.Y.S. and R.O.D.O.S.. Adaptations and improvements have been performed to give better tools, they are detailed in this paper. (N.C.)

  5. Food chain data customization for decision support systems in Austria

    International Nuclear Information System (INIS)

    Gert, Sdouz; Manfred, Pachole

    2006-01-01

    In the case of a nuclear accident in Europe the integral decision support system R.O.D.O.S. ( real-time on-line decision support system for off-site emergency management) supplies comprehensive information on the present and future radiological situation, and the consequences of measures to protect the population. These data comprise mainly map information such as population distribution, rivers, roads, vegetation areas and production data of various food products. This work concentrates on the customization of the data for the food chain and dose module for terrestrial pathways. During the last fifteen years two different codes have been used in Austria for support during accidents with radioactive releases: O.E.C.O.S.Y.S. and R.O.D.O.S.. Adaptations and improvements have been performed to give better tools, they are detailed in this paper. (N.C.)

  6. Social support, world assumptions, and exposure as predictors of anxiety and quality of life following a mass trauma.

    Science.gov (United States)

    Grills-Taquechel, Amie E; Littleton, Heather L; Axsom, Danny

    2011-05-01

    This study examined the influence of a mass trauma (the Virginia Tech campus shootings) on anxiety symptoms and quality of life, as well as the potential vulnerability/protective roles of world assumptions and social support. Pre-trauma adjustment data, collected in the six months prior to the shooting, was examined along with two-month post-shooting data in a sample of 298 female students enrolled at the university at the time of the shootings. Linear regression analyses revealed consistent predictive roles for world assumptions pertaining to control and self-worth as well as family support. In addition, for those more severely exposed to the shooting, greater belief in a lack of control over outcomes appeared to increase vulnerability for post-trauma physiological and emotional anxiety symptoms. Implications of the results for research and intervention following mass trauma are discussed. Copyright © 2010 Elsevier Ltd. All rights reserved.

  7. Real-time multi-task operators support system

    International Nuclear Information System (INIS)

    Wang He; Peng Minjun; Wang Hao; Cheng Shouyu

    2005-01-01

    The development in computer software and hardware technology and information processing as well as the accumulation in the design and feedback from Nuclear Power Plant (NPP) operation created a good opportunity to develop an integrated Operator Support System. The Real-time Multi-task Operator Support System (RMOSS) has been built to support the operator's decision making process during normal and abnormal operations. RMOSS consists of five system subtasks such as Data Collection and Validation Task (DCVT), Operation Monitoring Task (OMT), Fault Diagnostic Task (FDT), Operation Guideline Task (OGT) and Human Machine Interface Task (HMIT). RMOSS uses rule-based expert system and Artificial Neural Network (ANN). The rule-based expert system is used to identify the predefined events in static conditions and track the operation guideline through data processing. In dynamic status, Back-Propagation Neural Network is adopted for fault diagnosis, which is trained with the Genetic Algorithm. Embedded real-time operation system VxWorks and its integrated environment Tornado II are used as the RMOSS software cross-development. VxGUI is used to design HMI. All of the task programs are designed in C language. The task tests and function evaluation of RMOSS have been done in one real-time full scope simulator. Evaluation results show that each task of RMOSS is capable of accomplishing its functions. (authors)

  8. The verification of neutron activation analysis support system (cooperative research)

    Energy Technology Data Exchange (ETDEWEB)

    Sasajima, Fumio; Ichimura, Shigeju; Ohtomo, Akitoshi; Takayanagi, Masaji [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Sawahata, Hiroyuki; Ito, Yasuo [Tokyo Univ. (Japan). Research Center for Nuclear Science and Technology; Onizawa, Kouji [Radiation Application Development Association, Tokai, Ibaraki (Japan)

    2000-12-01

    Neutron activation analysis support system is the system in which even the user who has not much experience in the neutron activation analysis can conveniently and accurately carry out the multi-element analysis of the sample. In this verification test, subjects such functions, usability, precision and accuracy of the analysis and etc. of the neutron activation analysis support system were confirmed. As a method of the verification test, it was carried out using irradiation device, measuring device, automatic sample changer and analyzer equipped in the JRR-3M PN-3 facility, and analysis software KAYZERO/SOLCOI based on the k{sub 0} method. With these equipments, calibration of the germanium detector, measurement of the parameter of the irradiation field and analysis of three kinds of environmental standard sample were carried out. The k{sub 0} method adopted in this system is primarily utilized in Europe recently, and it is the analysis method, which can conveniently and accurately carried out the multi-element analysis of the sample without requiring individual comparison standard sample. By this system, total 28 elements were determined quantitatively, and 16 elements with the value guaranteed as analytical data of the NIST (National Institute of Standards and Technology) environment standard sample were analyzed in the accuracy within 15%. This report describes content and verification result of neutron activation support system. (author)

  9. A framework for operator support systems for CANDU

    International Nuclear Information System (INIS)

    Lupton, L.R.; Lipsett, J.J.; Shah, R.R.

    1989-11-01

    The size and complexity of nuclear power plants has increased significantly in the last 20 years. There is a general agreement that both plant safety and availability can be enhanced by providing the operator with more operational support if than can be done without overloading him/her with unnecessary information. Recent advances in computer technology provide opportunities for implementing operator support systems that are significantly different from the ones based on the more conventional technologies used in plant control rooms. In particular, artificial intelligence and the related technologies will play a major role in the development of innovative methods for information processing and presentation. Our approach to these technologies is that they must be integrated into the overall management and control philosophy of the plant and are not to be treated as vehicles to implement point solutions. The underlying philosophy behind this approach and the design objectives and goals for the CANDU 3 control centre are discussed in this paper. Operator support systems will integrate into the overall control philosophy by complementing the operator. There is also a role for such systems in assisting the operator to be a situation manager, organizing, managing and planning the running of the plant. Four support systems that incorporate the underlying philosophy are described

  10. Behavior Change Support Systems for Privacy and Security

    NARCIS (Netherlands)

    Kegel, Roeland Hendrik,Pieter; Wieringa, Roelf J.; Kulyk, Olga Anatoliyivna; Kelders, S.; van Gemert-Pijnen, L.; Oinas-Kukkonen, H

    2015-01-01

    This article proposes to use Behavior Change Support Systems (BCSSs) to improve the security of IT applications and the privacy of its users. We discuss challenges specific to BCSSs applied to information security, list research questions to be answered in order to meet these challenges, and propose

  11. Biological evaluation of mechanical circulatory support systems in calves

    NARCIS (Netherlands)

    Rakhorst, G; VanDerMeer, J; Kik, C; Mihaylov, D; Havlik, P; Trinkl, J; Monties, [No Value

    Data from animal experiments with mechanical circulatory support systems (MCSS) performed in Groningen and Marseille over the past years were used to obtain normal values of hematological, coagulation, rheological and blood chemistry parameters in calves. These parameters were divided between two

  12. A decision support system for firebase location in a nature ...

    African Journals Online (AJOL)

    2017-04-19

    Apr 19, 2017 ... implemented in the form of a computerised decision support system ... seven Department of Water Affairs and Forestry reserves (spanning an area of 118km2), ... and the solution methodology of §4 are then incorporated into a ...

  13. A Multi-criterial Decision Support System for Forest Management

    Science.gov (United States)

    Donald Nute; Geneho Kim; Walter D. Potter; Mark J. Twery; H. Michael Rauscher; Scott Thomasma; Deborah Bennett; Peter Kollasch

    1999-01-01

    We describe a research project that has as its goal development of a full-featured decision support system for managing forested land to satisfy multiple criteria represented as timber, wildlife, water, ecological, and wildlife objectives. The decision process proposed for what was originally conceived of as a Northeast Decision Model (NED) includes data acquisition,...

  14. Advanced Modular Power Approach to Affordable, Supportable Space Systems

    Science.gov (United States)

    Oeftering, Richard C.; Kimnach, Greg L.; Fincannon, James; Mckissock,, Barbara I.; Loyselle, Patricia L.; Wong, Edmond

    2013-01-01

    Recent studies of missions to the Moon, Mars and Near Earth Asteroids (NEA) indicate that these missions often involve several distinct separately launched vehicles that must ultimately be integrated together in-flight and operate as one unit. Therefore, it is important to see these vehicles as elements of a larger segmented spacecraft rather than separate spacecraft flying in formation. The evolution of large multi-vehicle exploration architecture creates the need (and opportunity) to establish a global power architecture that is common across all vehicles. The Advanced Exploration Systems (AES) Modular Power System (AMPS) project managed by NASA Glenn Research Center (GRC) is aimed at establishing the modular power system architecture that will enable power systems to be built from a common set of modular building blocks. The project is developing, demonstrating and evaluating key modular power technologies that are expected to minimize non-recurring development costs, reduce recurring integration costs, as well as, mission operational and support costs. Further, modular power is expected to enhance mission flexibility, vehicle reliability, scalability and overall mission supportability. The AMPS project not only supports multi-vehicle architectures but should enable multi-mission capability as well. The AMPS technology development involves near term demonstrations involving developmental prototype vehicles and field demonstrations. These operational demonstrations not only serve as a means of evaluating modular technology but also provide feedback to developers that assure that they progress toward truly flexible and operationally supportable modular power architecture.

  15. Data assimilation in the decision support system RODOS

    DEFF Research Database (Denmark)

    Rojas-Palma, C.; Madsen, H.; Gering, F.

    2003-01-01

    . The process of combining model predictions and observations, usually referred to as data assimilation, is described in this article within the framework of the real time on-line decision support system (RODOS) for off-site nuclear emergency management in Europe. Data assimilation capabilities, based on Kalman...

  16. Phase Change Permeation Technology For Environmental Control Life Support Systems

    Science.gov (United States)

    Wheeler, Raymond M.

    2014-01-01

    Use of a phase change permeation membrane (Dutyion [Trademark]) to passively and selectively mobilize water in microgravity to enable improved water recovery from urine/brine for Environment Control and Life Support Systems (ECLSS) and water delivery to plans for potential use in microgravity.

  17. Supporting Social Interaction in Intelligent Competence Development Systems

    NARCIS (Netherlands)

    Sereno, Bertrand; Boursinou, Eleni; Maxwell, Katrina; Angehrn, Albert

    2007-01-01

    Sereno, B., Boursinou, E., Maxwell, K., & Angehrn, A. A. (2007). Supporting Social Interaction in Intelligent Competence Development Systems. In D. Griffiths, R. Koper & O. Liber (Eds.), Proceedings of the 2nd TENCompetence Open Workshop (pp. 29-35). January, 11-12, 2007, Manchester, United Kingdom.

  18. Strengthening Health Information Systems to Support Post-Disaster ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Strengthening Health Information Systems to Support Post-Disaster Healthcare in Haiti. The occurrence of a natural disaster may seem to carry repercussions that are indiscriminate in nature; however, it is the vulnerable populations that suffer most during such events, and in the days, months and years that follow. In Haiti ...

  19. A Computerized Clinical Support System and Psychological Laboratory.

    Science.gov (United States)

    Cassel, Russell N.

    1978-01-01

    Advocating "holistic" medicine, this article details the benefits to be derived from using a computerized clinical support system in a psychological laboratory focusing on internal healing where the client/patient becomes a committed partner utilizing biofeedback equipment, gaming, and simulation to achieve self-understanding and…

  20. A Decision Support System for Ship Maintenance Capacity Planning

    NARCIS (Netherlands)

    de Boer, R.; Schutten, Johannes M.J.; Zijm, Willem H.M.

    1997-01-01

    In this paper, the basic framework and algorithms of a decision support system are discussed, which enhance process and capacity planning at a large repair shop. The research is strongly motivated by experiences in a project carried out at a dockyard, which performs repair, overhaul and modification