WorldWideScience

Sample records for mass destruction information

  1. The Information Aspect of Extremism and Terrorism and the Destructive Trends in the Mass Media

    Directory of Open Access Journals (Sweden)

    E V Nekrasova

    2013-12-01

    Full Text Available The article is devoted to the problem of destructive trends in modern Russian mass media as well as to the information component in the activities of extremist and terrorist organizations. The destructive trends in the mass media manifest themselves in the escalation of animosity, aggression, creation of the cult of violence and xenophobia moods. Terrorist organizations use the mass media for their own purposes: they create the atmosphere of fear and tension in society, recruit new followers, mainly among the youth, which is a serious problem. It is important to use the positive potential of the mass media to counteract extremism and terrorism.

  2. INVESTIGATION OF THE MODEL FOR DYNAMICS OF DESTRUCTIVE INFORMATION AND PSYCHOLOGICAL INFLUENCE ON MASS CONSCIOUSNESS

    Directory of Open Access Journals (Sweden)

    V. A. Minaev

    2016-12-01

    Full Text Available The article examines a mathematical model of destructive information-psychological influence (IPI dynamics on mass consciousness. It is shown that a model taking into account three main processes - informational influence on mass consciousness of interpersonal communication, mass media, effect of influence forgetting - has solution in the form of a generalized logistic curve. Given a statistical distribution over time of society individuals, who share ideas of IPI, which qualitatively confirms a formal decision model, presented in the form of nonlinear differential equations describing of innovation diffusion. Investigated special cases of the model, which in all cases confirmed existence of asymptotic stationary solutions. To use the model in practice to analyze and predict characteristics of IPI on society, and, ultimately, to control this effect, estimation of its parameters based on statistical data. Accented that the development of the model is essential in modern conditions complicate the problem of ensuring cyber security of the state, society and every individual member of society, including considering the development of social networks.

  3. Radiation, chemical and biological protection. Mass destruction weapons

    International Nuclear Information System (INIS)

    Janasek, D.; Svetlik, J.

    2005-01-01

    In this text-book mass destruction weapons and radiation, chemical and biological protection are reviewed. The text-book contains the following chapter: (1) Mass destruction weapons; (2) Matter and material; (3) Radioactive materials; (4) Toxic materials; (5) Biological resources; (6) Nuclear energetic equipment; Appendices; References.

  4. Weapons of mass destruction - current security threat

    International Nuclear Information System (INIS)

    Durdiak, J.; Gafrik, A.; Pulis, P.; Susko, M.

    2005-01-01

    This publication brings a complex and comprehensive view of the weapons of mass destruction phenomenon in the context of present military and political situation. It emphasizes the threat posed by proliferation of these destructive devices and their carriers as well as the threat present in their possession by unpredictable totalitarian regimes or terrorist groups. The publication is structured into four basic parts: Introduction Into The Topic, Nuclear Weapons, Chemical Weapons and Biological Weapons. The Introduction reflects the latest developments on the field of military technologies, which lead to the development of new destructive devices with characteristics comparable to basic types of WMDs - nuclear, chemical and biological. Based on the definition of WMD as 'weapon systems with enormous impact causing mass destruction, population, equipment and material losses', the modern mass destruction devices are assorted here, such as ecological, radiological and beam weapons, aerosol and container intelligent ammunition, the outburst of dangerous chemical substances from infrastructure, non-conventional weapons and military devices. The Nuclear Weapons part depicts the most destructive device of mass destruction mankind ever invented in close detail. It maps the history of most significant discoveries in nuclear physics, development and construction of the first nuclear weapons, accumulation of nuclear warheads and their carriers in the Cold war era, attempts of nuclear disarmament and reducing the number of nuclear weapons in possession of superpowers and their proliferation in the world's crisis regions including North Korea and Iran. The chapters devoted to theoretical grounds and physical principles of nuclear and thermonuclear weapons' functioning, the main categories and types, as well as destructive effects and consequences of use contain an adequate mathematical apparatus. This chapter's conclusion brings the overview of nuclear armament of states that

  5. Issues of weapons of mass destruction non-proliferation in Tajikistan

    International Nuclear Information System (INIS)

    Mirsaidov, U.M.

    2010-01-01

    This article is devoted to issues of weapons of mass destruction non-proliferation in Tajikistan. Over a period of 20 century, starting from First World War, the weapons of mass destruction arouse serious concern of world community. Geneva protocol of 1925 prohibits the use of chemical and biological weapons. Once nuclear weapon was created, the weapons of mass destruction distributions become the subject of high concern. Besides, during the end of 'cold war', regional conflicts, collapse of Soviet Union, as well as access to sensitive technologies considerably increase the danger of weapons of mass destruction distribution. More than 10 countries have active programs, relating to weapons of mass destruction and, possibly, more than ten countries have potential to start implementing such kinds of programs. Nowadays, trans national organized criminal groups and international terrorist networks are appeared in the world scene, which show interest in obtaining an access to sensitive materials, technologies, weapons and their distribution. After 11 September events, the risk of such weapons of mass destruction components use by such forces for Governments blackmail become real scene, which, despite of low possibility of this threat implementation, could have very serious and disastrous consequences. International community responded to these problems and challenges, basically through the following actions, which is detailed regime development of multilateral international treaties, directed to weapons of mass destruction distribution prevention. Non-proliferation treaty of nuclear weapons, Convention on prohibition of chemical weapons and Convention on prohibition of biological and toxin weapons are some of them. As it is known, Tajikistan signed all these treaties. For different reasons these treaties were subject of serious tests. Nuclear weapons tests in India and Pakistan in 1998 year, actual Israel status as state having nuclear weapon and North Korean program on

  6. Eliminating Adversary Weapons of Mass Destruction: What's at Stake?

    National Research Council Canada - National Science Library

    Hersman, Rebecca K

    2004-01-01

    .... Unfortunately, the current preoccupation with intelligence might mask other issues and shortcomings in the American ability to eliminate the threat posed by weapons of mass destruction in the hands of its enemies...

  7. Hospital planning for weapons of mass destruction incidents

    Directory of Open Access Journals (Sweden)

    Perry Ronald

    2006-01-01

    Full Text Available As terrorists attacks increase in frequency, hospital disaster plans need to be scrutinized to ensure that they take into account issues unique to weapons of mass destruction. This paper reports a review of the literature addressing hospital experiences with such incidents and the planning lessons thus learned. Construction of hospital disaster plans is examined as an ongoing process guided by the disaster planning committee. Hospitals are conceived as one of the components of a larger community disaster planning efforts, with specific attention devoted to defining important linkages among response organizations. This includes the public health authorities, political authorities, prehospital care agencies, and emergency management agencies. A review is completed of six special elements of weapons of mass destruction incidents that should be addressed in hospital disaster plans: incident command, hospital security, patient surge, decontamination, mental health consequences, and communications. The paper closes with a discussion of the importance of training and exercises in maintaining and improving the disaster plan.

  8. Cartagena declaration on renunciation of weapons of mass destruction

    International Nuclear Information System (INIS)

    1992-02-01

    The document reproduces the text of the Cartagena Declaration on Renunciation of Weapons of Mass Destruction, signed by the Presidents of Bolivia, Colombia, Ecuador, Peru and Venezuela at Cartagena de Indias, Colombia, on 4 December 1991

  9. Morality of Weapons of Mass Destruction: A Case Study of the Atomic Bombings of Hiroshima and Nagasaki

    Science.gov (United States)

    2010-04-01

    34 Paul C. Szasz , “The International Law Concerning Weapons of Mass...downloaded 18 October 2009. Szasz , Paul C., “The International Law Concerning Weapons of Mass Destruction.” In Ethics and Weapons of Mass Destruction

  10. Polonium-210 as Weapon for Mass Destruction

    International Nuclear Information System (INIS)

    Koteng, A.O.

    2010-01-01

    Properties of Po-210 make it possible for its use as weapon of mass destruction. Po-210 occurs naturally in minute quantities in the human body, in Uranium ore (< 0.1 mg Po-210 / ton ) and as a product of Radon-222 gas decay chain. Po-210 also occurs as deposition on vegetation (tobacco leaves). Po-210 is produced by bombardment of Bi-209 with neutrons in a nuclear reactor. Russia produces 8 grams per year for export to USA market

  11. Medical experimentation concerning chemical and biological weapons for mass destruction.

    Science.gov (United States)

    Deutsch, Erwin

    2003-04-01

    This article is the text of a speech originally presented at the Second World Conference on Medical Ethics at Gijon, Spain, on 2 October 2002 under the title "Medical Experimentation Concerning Chemical and Biological Weapons for Mass Destruction: Clinical Design for New Smallpox Vaccines: Ethical and Legal Aspects." Experimentation on vaccines such as smallpox is subject to the usual ethical rules such as the need for informed consent. However, the participants will not often be at risk of catching the disease but expose themselves by taking part in the experimentation. Professor Deutsch explores the implications of this, including the position of vulnerable groups such as children, those with mental handicaps, and those acting under orders such as the miliary, the policy and fire officers.

  12. Combating the terrorist use of mass destruction weapons, particularly nuclear weapons

    International Nuclear Information System (INIS)

    Barakat, M.

    2008-01-01

    The risks of mass destruction weapons vary and also forms of damages resulting therefrom. While the effects of nuclear weapons are focused, sudden and comprehensive, the chemical weapons have limited impacts relatively unless used intensively severe prejudice to the element of surprise, and thus impaired the efficacy of their influences,especially that they affect exceptionally the individuals in the area of injury and biological weapons do not announce themselves except through their effect that appears later than the time of use as they affect exceptionally the organisms in the area of injury.The mass destruction weapons have turned from being a purely military means in the early twentieth century and have now become the means of violence against governments and countries that they should prepare themselves for and respond in ways of successful and effective countermeasures. Despite the fact that the acquisition of mass destruction weapons can be considered as a priority objective, which terrorist groups and organizations steadily seek but their accessibility is flanked by a lot of difficulties. Addressing the risk of further spread of nuclear weapons, and especially after doubling the power of those high-risk weapons, the international community has an approach to take a number of arrangements that complement each other to control and resist nuclear proliferation, either for the states or for terrorist groups.

  13. The Neutrino Bomb: A New Weapon of Mass Destruction

    International Nuclear Information System (INIS)

    Broda, E.

    1978-01-01

    This text was written by E. Broda in a “Supplementary” paper for Pugwash in the year 1978. It is about the neutrino and a general principle of its use as a potential weapon of mass destruction. It ends with a suggestion to convene a Pugwash workshop for dealing with the threat of the neutrino bomb. (zarka)

  14. Security in the Mediterranean basin: terrorism and weapons of mass destruction

    International Nuclear Information System (INIS)

    Benoit, L.

    2006-01-01

    The european union has appreciated the gravity of the threat from terrorism and weapons of mass destruction, and has adopted a strategy for keeping up its guard, particularly in the Mediterranean basin. The author reviews what is being done to meet these scourges. (author)

  15. Responding to the Threat of Weapons of Mass Destruction After September 11, 2001

    National Research Council Canada - National Science Library

    Lewy, Donald

    2002-01-01

    This paper addresses the threat posed by weapons of mass destruction as it is understood following the events of 11 September 2001 and the anthrax attacks directed at congressional and media offices...

  16. Turkey's response to threats of weapons of mass destruction

    OpenAIRE

    Al, Guray.

    2001-01-01

    Unlike most of its NATO allies, Turkey did not emerge from the Cold War with enhanced security. The acquisition of weapons of mass destruction (WMD) and ballistic missiles by its neighbors in the Middle Eastâ Iran, Iraq and Syriaâ creates a serious security concern for Turkey. This thesis analyzes the numerous threats posed to Turkey by its neighborsα nuclear, chemical and biological weapons programs and their ballistic missiles. It evaluates Turkeyαs defense options to counter these thre...

  17. The fight against weapons of mass destruction at the crossroads

    International Nuclear Information System (INIS)

    Biad, A.

    2004-01-01

    Under the joint pressure of the US unilateralism and of some proliferating countries, the non-proliferation regimes are today at the crossroads. Despite the enormous efforts mobilized so far, the proliferation of weapons of mass destruction appears as inescapable. This article analyzes the reasons of the continuous erosion of non-proliferation regimes and the possible means to delay this phenomenon: counter-proliferation measures, control of exported nuclear technologies and equipments, use of diplomatic and politico-economical means, controlled multilateral disarmament. (J.S.)

  18. Characterization of Nuclear Materials Using Complex of Non-Destructive and Mass-Spectroscopy Methods of Measurements

    International Nuclear Information System (INIS)

    Gorbunova, A.; Kramchaninov, A.

    2015-01-01

    Information and Analytical Centre for nuclear materials investigations was established in Russian Federation in the February 2 of 2009 by ROSATOM State Atomic Energy Corporation (the order #80). Its purpose is in preventing unauthorized access to nuclear materials and excluding their illicit traffic. Information and Analytical Centre includes analytical laboratory to provide composition and properties of nuclear materials of unknown origin for their identification. According to Regulation the Centre deals with: · identification of nuclear materials of unknown origin to provide information about their composition and properties; · arbitration analyzes of nuclear materials; · comprehensive research of nuclear and radioactive materials for developing techniques characterization of materials; · interlaboratory measurements; · measurements for control and accounting; · confirmatory measurements. Complex of non-destructive and mass-spectroscopy techniques was developed for the measurements. The complex consists of: · gamma-ray techniques on the base of MGAU, MGA and FRAM codes for uranium and plutonium isotopic composition; · gravimetrical technique with gamma-spectroscopy in addition for uranium content; · calorimetric technique for plutonium mass; · neutron multiplicity technique for plutonium mass; · measurement technique on the base of mass-spectroscopy for uranium isotopic composition; · measurement technique on the base of mass-spectroscopy for metallic impurities. Complex satisfies the state regulation requirements of ensuring the uniformity of measurements including the Russian Federation Federal Law on Ensuring the Uniformity of Measurements #102-FZ, Interstate Standard GOST R ISO/IEC 17025-2006, National Standards of Russian Federation GOST R 8.563-2009, GOST R 8.703-2010, Federal Regulations NRB-99/2009, OSPORB 99/2010. Created complex is provided in reference materials, equipment end certificated techniques. The complex is included in accredited

  19. Weapons of mass destruction, WMD

    International Nuclear Information System (INIS)

    Vogel, H.

    2007-01-01

    Purpose: Since the invasion into Iraq in 2003, weapons of mass destruction (WMD), have come to general notice; they include today chemical, biological, and atomic/nuclear weapons, (CW, BW, and AW). Radiological findings shall be described. Material and methods: X-ray findings of victims of WMD are described. From CW, own observations are reported. Examples of (possible) X-ray findings of victims of BW are described. AW may induce radiation disease. Results: Exposure to sulfur-lost induces severe bronchitis; if the radiograph shows pulmonary infiltrations, the prognosis is bad; a late consequence maybe bronchiectasis. BW can be based on bacteria, virus or toxins. An approach of the X-ray findings for BW victims is based on the assumption that the disease induced by BW has the same (or a similar) clinic and radiology as that induced by the original microorganism or by the unchanged toxism. This approximation may have its limits, if the germ or toxin has been modified. In survivors of AW, the radiology is probably that of victims of thermal radiation and blast. Conclusion: WMD seem to be a real or a possible threat. They can be used in war, in terrorist attacks, in crime, and in action of secret services. In case that WMD are employed, X-ray diagnostic will be used to evaluate the prognosis (triage) and the risk of infection

  20. Weapons of mass destruction, WMD

    Energy Technology Data Exchange (ETDEWEB)

    Vogel, H. [Asklepios Klinik St. Georg, Roentgenabteilung, Lohmuehlenstrasse 5, D-20099 Hamburg (Germany)], E-mail: Hermann.vogel@ak-stgeorg.lbk-hh.de

    2007-08-15

    Purpose: Since the invasion into Iraq in 2003, weapons of mass destruction (WMD), have come to general notice; they include today chemical, biological, and atomic/nuclear weapons, (CW, BW, and AW). Radiological findings shall be described. Material and methods: X-ray findings of victims of WMD are described. From CW, own observations are reported. Examples of (possible) X-ray findings of victims of BW are described. AW may induce radiation disease. Results: Exposure to sulfur-lost induces severe bronchitis; if the radiograph shows pulmonary infiltrations, the prognosis is bad; a late consequence maybe bronchiectasis. BW can be based on bacteria, virus or toxins. An approach of the X-ray findings for BW victims is based on the assumption that the disease induced by BW has the same (or a similar) clinic and radiology as that induced by the original microorganism or by the unchanged toxism. This approximation may have its limits, if the germ or toxin has been modified. In survivors of AW, the radiology is probably that of victims of thermal radiation and blast. Conclusion: WMD seem to be a real or a possible threat. They can be used in war, in terrorist attacks, in crime, and in action of secret services. In case that WMD are employed, X-ray diagnostic will be used to evaluate the prognosis (triage) and the risk of infection.

  1. Nonconventional concrete hollow blocks evaluation by destructive and non-destructive testing

    Directory of Open Access Journals (Sweden)

    M.S. Rodrigues

    Full Text Available The aim of this study was to evaluate cementitious matrices properties by partial replacement of Portland cement by silica fume (SF or by rice husk ash (RHA, and their application in nonbearing hollow blocks, tested by destructive and non-destructive methods. The following mixtures were produced: reference (100% of Portland cement and Portland cement replacement (10% by mass with SF or RHA. The non-destructive testing showed that the highest values of UPV were obtained for SF-based blocks and RHA-based blocks. The destructive test showed better results for SF-based blocks, but there was no statistical difference between the RHA-based and control ones.

  2. Controlling weapons of mass destruction through the rule of law

    Energy Technology Data Exchange (ETDEWEB)

    Tanzman, E.A.

    1995-08-08

    Many who speak of the end of the Cold War emphasize the improvement in international relations when they speak of the momentous consequences of this event. According to this image, the half century since Trinity has been a period of sparse international communication during which the Eastern and Western blocs hibernated in their isolated dens of security alliances. The emphasis in the phrase ``Cold War`` was on the word ``cold,`` and relations with the former Communist regimes are now ``warm`` by comparison. It is equally valid to consider what has happened to the word ``was` in this highly descriptive phrase. While meaningful international dialogue was in a state of relative lethargy during much of the last fifty years, the military establishments of the Great Powers were actively engaged in using as much force as possible in their efforts to control world affairs, short of triggering a nuclear holocaust. Out of these military postures a tense peace ironically emerged, but the terms by which decisions were made about controlling weapons of mass destruction (i.e., nuclear, chemical, and biological weapons) were the terms of war. The thesis of this paper is that the end of the Cold War marks a shift away from reliance on military might toward an international commitment to controlling weapons,of mass destruction through the ``rule of law.`` Rawls wrote that ``legal system is a coercive order of public rules addressed to rational persons for the purpose of regulating their conduct and providing the framework for social cooperation. The regular and impartial administration of public rules, becomes the rule of law when applied to the legal system.`` Inparticular, Rawls identifies as part of this system of public rules those laws that aim to prevent free riders on the economic system and those that aim to correct such externalities as environmental pollution.``

  3. Defining Weapons of Mass Destruction

    Science.gov (United States)

    2012-01-01

    Cyprus, Liberia, Malta, Marshall Islands , Mongolia, Panama, and St. Vin- cent and the Grenadines, according to a State Department summary available...1972 Biological and Toxin Weapons Convention, and the 1993 Chemical Weapons Convention. As such, NBC weapons represent a group of weapons that the...Development, Produc- tion and Stockpiling of Bacteriological (Biological) and Toxin Weapons and on Their Destruction contains two references to WMD

  4. Monitoring non-proliferation of weapons of mass destruction: Can regional CBMs play a role?

    International Nuclear Information System (INIS)

    Sood, R.

    1994-01-01

    The experience of regional Confidence Building Measures (CBM), has only limited applicability for tackling proliferation of weapons of mass destruction. Where the international norm has developed as in the case of biological and chemical weapons, through international disarmament treaties, regional initiatives can strengthen this norm. Where a norm is less well-founded, regional initiatives are not likely to succeed. Specifically, with regard to nuclear weapons, consensus on negotiations for a comprehensive test ban treaty and a convention for prohibition of production of fissile materials for nuclear weapons purposes and explosive devices is a positive development. Successful conclusion of these universal and verifiable treaties will go a long way to strengthening the international norm against proliferation. Two other measures are critical - a development of a non-use assurance and commencement of multilateral nuclear disarmament negotiations among all five nuclear weapon States. If the international community witnesses improvement in these areas, regional negotiations will be stimulated. Therefore, the primary focus should be on developing an international norm to eliminate weapons of mass destruction. Regional efforts will take their cue from these international norms and would result in CBMs that are consistent with the international norm

  5. [In-hospital management of victims of chemical weapons of mass destruction].

    Science.gov (United States)

    Barelli, Alessandro; Gargano, Flavio; Proietti, Rodolfo

    2005-01-01

    Emergency situations caused by chemical weapons of mass destruction add a new dimension of risk to those handling and treating casualties. The fundamental difference between a hazardous materials incident and conventional emergencies is the potential for risk from contamination to health care professionals, patients, equipment and facilities of the Emergency Department. Accurate and specific guidance is needed to describe the procedures to be followed by emergency medical personnel to safely care for a patient, as well as to protect equipment and people. This review is designed to familiarize readers with the concepts, terminology and key operational considerations that affect the in-hospital management of incidents by chemical weapons.

  6. Aesthetics of destruction in contemporary science fiction cinema

    OpenAIRE

    Warton, John Phillips

    2015-01-01

    Mass destruction imagery within the science fiction film genre is not a new cinematic development. However, a swell of destruction-centred films has emerged since the proliferation of digital technologies and computer-generated imagery that reflect concerns that extend beyond notions of spectacle. Through illusionistic realism techniques, the aesthetics of mass destruction imagery within science fiction cinema can be seen as appropriating the implied veracity of other film trad...

  7. Verification of Chemical Weapons Destruction

    International Nuclear Information System (INIS)

    Lodding, J.

    2010-01-01

    The Chemical Weapons Convention is the only multilateral treaty that bans completely an entire category of weapons of mass destruction under international verification arrangements. Possessor States, i.e. those that have chemical weapons stockpiles at the time of becoming party to the CWC, commit to destroying these. All States undertake never to acquire chemical weapons and not to help other States acquire such weapons. The CWC foresees time-bound chemical disarmament. The deadlines for destruction for early entrants to the CWC are provided in the treaty. For late entrants, the Conference of States Parties intervenes to set destruction deadlines. One of the unique features of the CWC is thus the regime for verifying destruction of chemical weapons. But how can you design a system for verification at military sites, while protecting military restricted information? What degree of assurance is considered sufficient in such circumstances? How do you divide the verification costs? How do you deal with production capability and initial declarations of existing stockpiles? The founders of the CWC had to address these and other challenges in designing the treaty. Further refinement of the verification system has followed since the treaty opened for signature in 1993 and since inspection work was initiated following entry-into-force of the treaty in 1997. Most of this work concerns destruction at the two large possessor States, Russia and the United States. Perhaps some of the lessons learned from the OPCW experience may be instructive in a future verification regime for nuclear weapons. (author)

  8. Autonomous bio-chemical decontaminator (ABCD) against weapons of mass destruction

    Science.gov (United States)

    Hyacinthe, Berg P.

    2006-05-01

    The proliferation of weapons of mass destruction (WMD) and the use of such elements pose an eminent asymmetric threat with disastrous consequences to the national security of any nation. In particular, the use of biochemical warfare agents against civilians and unprotected troops in international conflicts or by terrorists against civilians is considered as a very peculiar threat. Accordingly, taking a quarantine-before-inhalation approach to biochemical warfare, the author introduces the notion of autonomous biochemical decontamination against WMD. In the unfortunate event of a biochemical attack, the apparatus proposed herein is intended to automatically detect, identify, and more importantly neutralize a biochemical threat. Along with warnings concerning a cyber-WMD nexus, various sections cover discussions on human senses and computer sensors, corroborating evidence related to detection and neutralization of chemical toxins, and cyber-assisted olfaction in stand alone, peer-to-peer, and network settings. In essence, the apparatus can be used in aviation and mass transit security to initiate mass decontamination by dispersing a decontaminant aerosol or to protect the public water supply against a potential bioterrorist attack. Future effort may involve a system-on-chip (SoC) embodiment of this apparatus that allows a safer environment for the emerging phenomenon of cyber-assisted olfaction and morph cell phones into ubiquitous sensors/decontaminators. Although this paper covers mechanisms and protocols to avail a neutralizing substance, further research will need to explore the substance's various pharmacological profiles and potential side effects.

  9. Bill related to the struggle against proliferation of mass destruction weapons and their vectors

    International Nuclear Information System (INIS)

    2010-01-01

    This bill indicates the modifications brought to different French laws and codes (penal code, defence code, custom code) and defines provisions and penalties within the frame of struggle against the proliferation of weapons of mass destruction (nuclear weapons, biological weapons and toxin-based weapons, chemical weapons), and against the proliferation of their vectors. These modifications, provisions and penalties also concern double-use products. The bill also defines the modifications brought to the French penal procedure code. It finally addresses offenses related to these proliferations which can be considered as an act of terrorism

  10. The fight against weapons of mass destruction at the crossroads; La lutte contre la proliferation des armes de destruction massive a la croisee des chemins

    Energy Technology Data Exchange (ETDEWEB)

    Biad, A. [Rouen Univ., Faculte de Droit, de Sciences Economiques et de Gestion, 76 - Mont-Saint-Aignan (France)

    2004-07-01

    Under the joint pressure of the US unilateralism and of some proliferating countries, the non-proliferation regimes are today at the crossroads. Despite the enormous efforts mobilized so far, the proliferation of weapons of mass destruction appears as inescapable. This article analyzes the reasons of the continuous erosion of non-proliferation regimes and the possible means to delay this phenomenon: counter-proliferation measures, control of exported nuclear technologies and equipments, use of diplomatic and politico-economical means, controlled multilateral disarmament. (J.S.)

  11. Communication of 19 May 2004 from the Council of the European Union concerning EU strategy for the fight against proliferation of weapons of mass destruction

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-27

    The Director General has received a letter from Mr. Javier Solana, Secretary General/High Representative of the Council of the European Union, dated 19 May 2004, attaching a copy of the 'Council Joint Action on support for IAEA activities under its Nuclear Security Programme and in the framework of the implementation of the EU Strategy against Proliferation of Weapons of Mass Destruction' of 12 May 2004, which was adopted by the Council on 17 May 2004. The Council document is attached herewith for the information of Member States.

  12. Performance analysis of ventilation systems with desiccant wheel cooling based on exergy destruction

    International Nuclear Information System (INIS)

    Tu, Rang; Liu, Xiao-Hua; Hwang, Yunho; Ma, Fei

    2016-01-01

    Highlights: • Ventilation systems with desiccant wheel were analyzed from exergy destruction. • Main performances influencing factors for ventilation systems are put forward. • Improved ventilation systems with lower exergy destruction are suggested. • Performances of heat pumps driven ventilation systems are greatly increased. - Abstract: This paper investigates the performances of ventilation systems with desiccant wheel cooling from the perspective of exergy destructions. Based on the inherent influencing factors for exergy destructions of heat and mass transfer and heat sources, provide guidelines for efficient system design. First, performances of a basic ventilation system are simulated, which is operated at high regeneration temperature and low coefficient of performance (COP). Then, exergy analysis of the basic ventilation system shows that exergy destructions mainly exist in the heat and mass transfer components and the heat source. The inherent influencing factors for the heat and mass transfer exergy destruction are heat and mass transfer capacities, which are related to over dehumidification of the desiccant wheel, and unmatched coefficients, which represent the uniformity of the temperature or humidity ratio differences fields for heat and mass transfer components. Based on these findings, two improved ventilation systems are suggested. For the first system, over dehumidification is avoided and unmatched coefficients for each component are reduced. With lower heat and mass transfer exergy destructions and lower regeneration temperature, COP and exergy efficiency of the first system are increased compared with the basic ventilation system. For the second system, a heat pump, which recovers heat from the process air to heat the regeneration air, is adopted to replace the electrical heater and cooling devices. The exergy destruction of the heat pump is considerably reduced as compared with heat source exergy destruction of the basic ventilation

  13. Electrochemical destruction of nitrosamines

    Energy Technology Data Exchange (ETDEWEB)

    Lejen, T; Volchek, K; Ladanowski, C; Velicogna, D; Whittaker, H [Environment Canada, Ottawa, ON (Canada). Emergencies Engineering Div.

    1996-09-01

    Treatment conditions for the electrolytic destruction of nitrosamines were studied. The joint investigation between Canada and the Ukraine was part of an assessment of hazardous contaminants at former Soviet ICBM missile sites. The electrochemical destruction of N-dimethylnitrosamines (NDMA) on carbon/platinum electrodes was studied under basic and acidic conditions by UV spectroscopy, gas chromatography, mass spectroscopy, and colorimetry. Experiments with a 100 ppm NDMA solution showed that electrolytic-reduction was pH sensitive within a range of pH 0.5 to 4.0. Electrolysis was effective for the reduction of NDMA in strong acidic conditions. 30 refs., 1 tab., 4 figs.

  14. Quality evaluation of soil-cement-plant residue bricks by the combination of destructive and non-destructive tests

    Directory of Open Access Journals (Sweden)

    Regis de C. Ferreira

    Full Text Available ABSTRACT Residues from agricultural activity can be used to improve the quality of soil-based bricks, constituting an interesting alternative for their destination. The technical quality of soil-cement-plant residue bricks was evaluated by the combination of non-destructive and destructive methods. A predominant clayey soil, Portland cement and residues of husks of both rice and Brachiaria brizantha cv. Marandu (0, 10, 20, 30 and 40%, in mass, in substitution to the 10% cement content were used. The bricks were submitted to destructive (water absorption and compressive strength and nondestructive (ultrasound tests for their physical and mechanical characterization. Results from both destructive and non-destructive tests were combined to determine the quantitative parameter named “anisotropic resistance” in order to evaluate the quality of the bricks. The addition that promoted best technical quality was 10% residue content, regardless of the residue type. The anisotropic resistance proved to be adequate for the technical quality evaluation of the bricks.

  15. Self-Destructing Dark Matter

    Energy Technology Data Exchange (ETDEWEB)

    Grossman, Yuval [Cornell U., LEPP; Harnik, Roni [Fermilab; Telem, Ofri [Cornell U., LEPP; Zhang, Yue [Northwestern U.

    2017-12-01

    We present Self-Destructing Dark Matter (SDDM), a new class of dark matter models which are detectable in large neutrino detectors. In this class of models, a component of dark matter can transition from a long-lived state to a short-lived one by scattering off of a nucleus or an electron in the Earth. The short-lived state then decays to Standard Model particles, generating a dark matter signal with a visible energy of order the dark matter mass rather than just its recoil. This leads to striking signals in large detectors with high energy thresholds. We present a few examples of models which exhibit self destruction, all inspired by bound state dynamics in the Standard Model. The models under consideration exhibit a rich phenomenology, possibly featuring events with one, two, or even three lepton pairs, each with a fixed invariant mass and a fixed energy, as well as non-trivial directional distributions. This motivates dedicated searches for dark matter in large underground detectors such as Super-K, Borexino, SNO+, and DUNE.

  16. Weapons of mass destruction free zone in the Middle East: getting out of the NPT framework

    International Nuclear Information System (INIS)

    Hautecouverture, Benjamin

    2013-10-01

    The 8. Non-Proliferation Treaty Review Conference (NPT, 2010) was marked by the resumption of diplomatic thinking on the objective of a 'weapons of mass destruction free zone' (WMDFZ) in the Middle east: a conference gathering the states of the region was planned to be held in 2012, it actually never took place. This setback is easily explained, it does not undermine the goal as such but it questions the NPT as a framework for action and progress. Any real progress on a project of WMDFZ requires a regional framework for dialogue. For now, this framework is lacking. (author)

  17. Seaborne Delivery Interdiction of Weapons of Mass Destruction (WMD)

    Energy Technology Data Exchange (ETDEWEB)

    Glauser, H

    2011-03-03

    Over the next 10-20 years, the probability of a terrorist attack using a weapon of mass destruction (WMD) on the United States is projected to increase. At some point over the next few decades, it may be inevitable that a terrorist group will have access to a WMD. The economic and social impact of an attack using a WMD anywhere in the world would be catastrophic. For weapons developed overseas, the routes of entry are air and sea with the maritime vector as the most porous. Providing a system to track, perform a risk assessment and inspect all inbound marine traffic before it reaches US coastal cities thereby mitigating the threat has long been a goal for our government. The challenge is to do so effectively without crippling the US economy. The Portunus Project addresses only the maritime threat and builds on a robust maritime domain awareness capability. It is a process to develop the technologies, policies and practices that will enable the US to establish a waypoint for the inspection of international marine traffic, screen 100% of containerized and bulk cargo prior to entry into the US if deemed necessary, provide a palatable economic model for transshipping, grow the US economy, and improve US environmental quality. The implementation strategy is based on security risk, and the political and economic constraints of implementation. This article is meant to provide a basic understanding of how and why this may be accomplished.

  18. Report on the bill project related to the struggle against proliferation of weapons of mass destruction and their delivery systems

    International Nuclear Information System (INIS)

    2010-01-01

    In a first part presenting the various forms of proliferations, the author first gives a quantitative overview of illegal activities concerning nuclear materials, and then discusses the existence and activities of proliferation networks, explaining how international trade liberalization creates a favourable context for proliferations of any kind, and describing how a typical network is organised. He also discusses the example of Iraq and the case of the network created by the Pakistani scientist Abdul Q. Khan. The risk created by the hypothetical relationship between terrorism and nuclear weapon of mass destruction is also questioned. Then, after having recalled the existing international texts and the present national legislation, the author comments the contribution on the bill project and outlines aspects which are not dealt with by this bill project: radiological devices and cybernetic attacks. Then he reports the comments made by the commission on the bill project articles which define interdictions, sanctions and sentences, or procedures against people or organisations involved in the financing or the use of weapons of mass destruction (biological and chemical). A table gives a comparison between the bill project text and the commission's propositions

  19. Destructive analysis and evaluation services

    International Nuclear Information System (INIS)

    Kuhn, E.; Lemaire, R.; Wenzel, U.; Aigner, H.; Bagliano, G.; Deron, S.; Jordan, L.

    1986-07-01

    This manual describes the procedures for independent verification measurements by Destructive Analysis as required by the Divisions of Operations. It includes the relevant instructions and information necessary to achieve the verification from sampling through final use of the evaluation results. It is a working/reference document for the Inspectors and for the supporting units, as well as a training manual for Inspectors which brings together all the necessary information for verification by Destructive Analysis. This manual gives information essential to the Inspector and to the units of the Safeguards Analytical Services (SAS) in the following areas: material stratification, sampling, sample conditioning and data collection; packaging, transporting, tracking, receipt and analysis of samples; and evaluation and final use of the evaluation results. This information is provided as: specific instructions and/or examples; summaries of relevant, existing documents; and references to existing documents. Forms are available for sample, item and stratum data collection as well as for transfer of samples and for the reporting of results. A complete typical example package of the documents related to the verification by Destructive Analysis is included. In addition, summaries of the analytical procedures used at the Safeguards Analytical Laboratory (SAL) of the IAEA and the expected measurement performance for element assay and isotopic abundance are provided. (author)

  20. Terror weapons. Ridding the world of nuclear, biological and chemical weapons - Commission on mass destruction weapons

    International Nuclear Information System (INIS)

    Blix, H.; Journe, V.

    2010-01-01

    This book approaches in 8 chapters the ambitious challenge of ridding the world of all mass destruction weapons: 1 - re-launching disarmament; 2 - terror weapons: nature of threats and answers (weakness of traditional answers, counter-proliferation); 3 - nuclear weapons: preventing proliferation and terrorism, reducing threat and nuclear weapons number, from regulation to banning); 4 - biological or toxin weapons; 5 - chemical weapons; 6 - vectors, anti-missile defenses and space weapons; 7 - exports control, international assistance and non-governmental actors; 8 - respect, verification, enforcement and role of the United Nations. The recommendations and works of the Commission are presented in appendix together with the declaration adopted on April 30, 2009. (J.S.)

  1. Weapons of Mass Destruction Technology Evaluation and Training Range

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Larry Young

    2009-05-01

    The Idaho National Laboratory (INL) has a long history for providing technology evaluation and training for military and other federal level Weapons of Mass Destruction (WMD) response agencies. Currently there are many federal organizations and commercial companies developing technologies related to detecting, assessing, mitigating and protecting against hazards associated with a WMD event. Unfortunately, very few locations exist within the United States where WMD response technologies are realistically field tested and evaluated using real chemical, biological, radiological, nuclear and explosive materials. This is particularly true with biological and radiological hazards. Related to this lack of adequate WMD, multi-hazard technology testing capability is the shortage of locations where WMD response teams can train using actual chemical, biological, and radiological material or highly realistic simulates. In response to these technology evaluation and training needs, the INL has assembled a consortium of subject matter experts from existing programs and identified dedicated resources for the purpose of establishing an all-hazards, WMD technology evaluation and training range. The author describes the challenges associated with creating the all-hazards WMD technology evaluation and training range and lists the technical, logistical and financial benefits of an all-hazards technology evaluation and training range. Current resources and capabilities for conducting all-hazard technology evaluation and training at the INL are identified. Existing technology evaluation and training programs at the INL related to radiological, biological and chemical hazards are highlighted, including successes and lessons learned. Finally, remaining gaps in WMD technology evaluation and training capabilities are identified along with recommendations for closing those gaps.

  2. Orbital roof encephalocele mimicking a destructive neoplasm.

    Science.gov (United States)

    Alsuhaibani, Adel H; Hitchon, Patrick W; Smoker, Wendy R K; Lee, Andrew G; Nerad, Jeffrey A

    2011-01-01

    The purpose of this case report is to report an orbital roof encephalocele mimicking a destructive orbital neoplasm. Orbital roof encephalocele is uncommon but can mimic neoplasm. One potential mechanism for the orbital roof destruction is a post-traumatic "growing orbital roof fracture." The growing fracture has been reported mostly in children but can occur in adults. Alternative potential etiologies for the encephalocele are discussed, including Gorham syndrome. Orbital roof encephalocele is uncommon in adults, and the findings can superficially resemble an orbital neoplasm. Radiographic and clinical features that might suggest the correct diagnosis include a prior history of trauma, overlying frontal lobe encephalomalacia without significant mass effect or edema, and an orbital roof defect. The "growing fracture" mechanism may be a potential explanation for the orbital roof destruction in some cases.

  3. International conference 'Addressing the issues of potential terrorism and guarding against weapons of mass destruction in Central Asia' Proceedings

    International Nuclear Information System (INIS)

    2010-04-01

    Over a period of 20 century, starting from First World War, the weapons of mass destruction (W D M) arouse serious concern in world community. Geneva's protocol of 1925 prohibits the use of chemical and biological weapons. Once nuclear weapon was created, the W D M proliferation becomes the subject of high concern. Nowadays, trans national organized criminal groups and international terrorist networks are appeared in the world scene, which show their interest in obtaining an access to sensitive materials, technologies, weapons and their distribution

  4. Destructive and non-destructive methods of measuring the quantity and isotopic composition of fissile materials for purposes of national safeguards in the German Democratic Republic

    International Nuclear Information System (INIS)

    Villun, K.; Gruner, V.; Siebert, Kh.U.; Hoffmann, D.

    1979-01-01

    The authors give a brief description of the destructive and non-destructive methods of measuring the quantity and isotopic composition of fissile materials used in the nuclear materials accounting and control system of the German Democratic Republic. They cite examples of the use of gamma-spectrometry, X-ray fluorescence analysis, neutron activation, radiochemical techniques, mass-spectrometry and alpha-spectrometry. (author)

  5. Non-Destructive Testing for Control of Radioactive Waste Package

    Science.gov (United States)

    Plumeri, S.; Carrel, F.

    2015-10-01

    Characterization and control of radioactive waste packages are important issues in the management of a radioactive waste repository. Therefore, Andra performs quality control inspection on radwaste package before disposal to ensure the compliance of the radwast characteristics with Andra waste disposal specifications and to check the consistency between Andra measurements results and producer declared properties. Objectives of this quality control are: assessment and improvement of producer radwaste packages quality mastery, guarantee of the radwaste disposal safety, maintain of the public confidence. To control radiological characteristics of radwaste package, non-destructive passive methods (gamma spectrometry and neutrons counting) are commonly used. These passive methods may not be sufficient, for instance to control the mass of fissile material contained inside radwaste package. This is particularly true for large concrete hull of heterogeneous radwaste containing several actinides mixed with fission products like 137Cs. Non-destructive active methods, like measurement of photofission delayed neutrons, allow to quantify the global mass of actinides and is a promising method to quantify mass of fissile material. Andra has performed different non-destructive measurements on concrete intermediate-level short lived nuclear waste (ILW-SL) package to control its nuclear material content. These tests have allowed Andra to have a first evaluation of the performance of photofission delayed neutron measurement and to identify development needed to have a reliable method, especially for fissile material mass control in intermediate-level long lived waste package.

  6. The destruction of organic matter

    CERN Document Server

    Gorsuch, T T

    1970-01-01

    International Series of Monographs in Analytical Chemistry, Volume 39: The Destruction of Organic Matter focuses on the identification of trace elements in organic compounds. The monograph first offers information on the processes involved in the determination of trace elements in organic matters, as well as the methods not involving complete destruction of these elements. The text surveys the sources of errors in the processes responsible in pinpointing elements in organic compounds. These processes include sampling, disruption of the samples, manipulation, and measurements. The book

  7. Compressed Sensing mm-Wave SAR for Non-Destructive Testing Applications Using Multiple Weighted Side Information

    Directory of Open Access Journals (Sweden)

    Mathias Becquaert

    2018-05-01

    Full Text Available This work explores an innovative strategy for increasing the efficiency of compressed sensing applied on mm-wave SAR sensing using multiple weighted side information. The approach is tested on synthetic and on real non-destructive testing measurements performed on a 3D-printed object with defects while taking advantage of multiple previous SAR images of the object with different degrees of similarity. The tested algorithm attributes autonomously weights to the side information at two levels: (1 between the components inside the side information and (2 between the different side information. The reconstruction is thereby almost immune to poor quality side information while exploiting the relevant components hidden inside the added side information. The presented results prove that, in contrast to common compressed sensing, good SAR image reconstruction is achieved at subsampling rates far below the Nyquist rate. Moreover, the algorithm is shown to be much more robust for low quality side information compared to coherent background subtraction.

  8. Weapons of mass destruction: Overview of the CBRNEs (Chemical, Biological, Radiological, Nuclear, and Explosives).

    Science.gov (United States)

    Prockop, Leon D

    2006-11-01

    The events of September 11, 2001, made citizens of the world acutely aware of disasters consequent to present-day terrorism. This is a war being waged for reasons obscure to many of its potential victims. The term "NBCs" was coined in reference to terrorist weapons of mass destruction, i.e., nuclear, biological and chemical. The currently accepted acronym is "CBRNE" which includes Chemical, Biological, Radiological, Nuclear, and Explosive weapons. Non-nuclear explosives are the most common terrorist weapon now in use. Nuclear and radiological weapons are beyond the scope of this publication, which focuses on the "CBEs", i.e. chemical, biological and explosive weapons. Although neurologists will not be the first responders to CBEs, they must know about the neurological effects in order to provide diagnosis and treatment to survivors. Neurological complications of chemical, biological and explosive weapons which have or may be used by terrorists are reviewed by international experts in this publication. Management and treatment profiles are outlined.

  9. Dismantlement and destruction of chemical, nuclear and conventional weapons

    International Nuclear Information System (INIS)

    Schulte, N.T.

    1997-01-01

    The safe destruction and dismantling of chemical, nuclear and conventional weapons is of fundamental importance to the security of all countries represented in this volume. Expertise in the field is not confined to one country or organisation: all can benefit from each other. There is an ever present danger of proliferation of weapons of mass destruction: approximately two dozen countries have ongoing programmes to develop or acquire such weapons, and many are also gaining the capability to build air-surface delivery systems. But much can be done to prevent proliferation by reducing leakage of materials and know-how and by solving the problems of the destruction of surplus weapons systems, which has now come to be a key issue. In 13 sessions of the workshop attention was paid to (1) Dismantlement and Destruction of Chemical, Nuclear and Conventional Weapons; (2) Status of Implementation of Arms Control Treaties and Voluntary Commitments; (3) National Perspectives on Cooperation in Disarmament; (4) Stocktaking of National and Bilateral Disposal/Destruction Programmes: Chemical Weapons; (5) Stocktaking of National and Bilateral Disposal/Destruction Programmes: Nuclear Weapons; (6) Stocktaking of National and Bilateral Disposal/Destruction Programmes: Conventional Weapons. Session; (7) Experience with Currently Employed Chemical Destruction Technologies; (8) Alternative Chemical Destruction Technologies; (9) Deactivation, Dismantlement and Destruction of Delivery Systems and Infrastructure for Nuclear Weapons; (10) Storage, Safeguarding and Disposition of Fissile Materials; (11) Technologies for Conversion and Civil Use of Demilitarized Materials; (12) International Organizations; and (13) Environmental Challenges Posed by Chemical and Nuclear Disarmament

  10. ODS Destruction in the United States and Abroad - February 2018

    Science.gov (United States)

    This technical report provides information on sources, destruction technologies, and best practices for recovery, collection, transport, and destruction of ozone-depleting substances and other fluorinated compounds such as HFCs

  11. A comparison between destructive and non-destructive techniques in determining coating thickness

    Science.gov (United States)

    Haider, F. I.; Suryanto; Ani, M. H.; Mahmood, M. H.

    2018-01-01

    Measuring coating thickness is an important part in research works related to coating applications. In general, techniques for measuring coating thickness may be divided into destructive and non-destructive methods which are commonly used depending on the applications. The objective of this study is to compare two methods measuring the coating thickness of electroplating copper coating on the austenitic stainless-steel substrate. The electroplating was carried out in a solution containing 200 g/L CuSO4, 100 g/L H2SO4 at room temperature and current of 40mA/cm2 during 20, 40, 60, 80 and 100 mins as coating periods. And the coating thickness was measured by two methods, cross sectional analysis as a destructive technique and weight gain as a non-destructive technique. The results show that at 20 mins coating time interval, the thickness measured by cross sectional method was 16.67 μm and by weight gain method was 17.37 μm, with difference of 0.7 μm and percentage error of 4.11%. This error increased to 5.27% at 100mins time interval, where the values of the thickness measured by cross sectional and weight gain were 86.33 μm and 81.9 μm respectively, and the difference was 4.43 μm. Moreover, though the weight gain method is fast and gives the indication for the termination of a coating process, information regarding the uniformity, porosity and the presence of cracks cannot be obtained. On the other hand, determining the coating thickness using destructive method will damage the sample.

  12. Isolated Petroclival Craniopharyngioma with Aggressive Skull Base Destruction

    Science.gov (United States)

    Lee, Young-Hen; Lim, Dong-Jun; Park, Jung-Yul; Chung, Yong-Gu; Kim, Young-Sik

    2009-01-01

    We report a rare case of petroclival craniopharyngioma with no connection to the sellar or suprasellar region. MRI and CT images revealed a homogenously enhancing retroclival solid mass with aggressive skull base destruction, mimicking chordoma or aggressive sarcoma. However, there was no calcification or cystic change found in the mass. Here, we report the clinical features and radiographic investigation of this uncommon craniopharyngioma arising primarily in the petroclival region. PMID:19881982

  13. DUST DESTRUCTION RATES AND LIFETIMES IN THE MAGELLANIC CLOUDS

    International Nuclear Information System (INIS)

    Temim, Tea; Dwek, Eli; Boyer, Martha L.; Tchernyshyov, Kirill; Meixner, Margaret; Gall, Christa; Roman-Duval, Julia

    2015-01-01

    The dust budget in galaxies depends on the rate at which dust grains are created in different stellar sources and destroyed by interstellar shocks. Because of their extensive wavelength coverage, proximity, and nearly face-on geometry, the Magellanic Clouds (MCs) provide a unique opportunity to study these processes in great detail. In this paper, we use the complete sample of supernova remnants (SNRs) in the MCs to calculate the lifetimes and destruction efficiencies of silicate and carbon dust. We find dust lifetimes of 22 ± 13 Myr (30 ± 17 Myr) for silicate (carbon) grains in the LMC, and 54 ± 32 Myr (72 ± 43 Myr) for silicate (carbon) grains in the SMC. The corresponding dust destruction rates are 2.3 × 10 –2 M ☉  yr –1 (5.9 × 10 –3 M ☉  yr –1 ) and 3.0 × 10 –3 M ☉  yr –1 (5.6 × 10 –4 M ☉  yr –1 ) for silicate (carbon) grains in the LMC and SMC, respectively. The significantly shorter lifetimes in the MCs, as compared to the Milky Way, are explained as the combined effect of their lower total dust mass and preferentially higher dust-to-gas (D2G) mass ratios in the vicinity of the SNRs. We find that the maximum dust injection rates by asymptotic giant branch stars and core collapse supernovae are an order of magnitude lower than the dust destruction rates by the SNRs, suggesting that most of the dust may be reconstituted in dense molecular clouds. We also discuss the dependence of the dust destruction rate on the local D2G mass ratio, ambient gas density, and metallicity, as well as the application of our results to other galaxies and dust evolution models

  14. Unceratainty of Heisenberg in Universe Destruction

    Directory of Open Access Journals (Sweden)

    Sri Jumini

    2017-12-01

    Full Text Available The Qur'an is a guidence which explaines all about the universe to human being. The discovery of science has been able to explain the truth of the Qur'an scientifically. One of which is the principle of Heisenberg's uncertainty in the event of the universe destruction. The purpose of this research is to know: 1 Science's view of the event of the universe destruction (Big Crunch in Qur’an [Al Infithaar]: 1-3, and How the relation of Heisenberg’s uncertainty principles and the law of thermodynamics II toward  the collapse of the universe (Big Crunch based on Scientific views and the Quran. This research is a qualitative research using library research method which analyzes the related books directly or indirectly. The results of the analysis stated that: 1 The concentration of mass, which is big enough, relates to some of the laws of physics, those are: Relativity, Heisenberg's uncertainty principles, and the law of Thermodynamic II; 2 The universe will return at its sole point, i.e; the absence of the universe; 3 The destruction of the universe is the destruction of the order of the universe which then the stars fall scatteredly because of the gravitational force that prevents them disappears, the balance of the universe diminishes, decreases and becomes uncertain, and eventually disappears.

  15. Official communique from the Government of Peru on the decision of the Government of Libya to cease production of weapons of mass destruction

    International Nuclear Information System (INIS)

    2004-01-01

    The Director General has received a letter from the Permanent Mission of Peru, dated 29 December 2003, enclosing an Official Communique by the Ministry of Foreign Affairs of Peru, regarding the decision of the Government of Libya to cease production of weapons of mass destruction. In the light of the wish expressed in the letter from the Permanent Mission of Peru, the text of the Communique is attached

  16. Pre-emptive Defence against International Terrorism and Weapons of Mass Destruction: A Reasoned Critique

    Directory of Open Access Journals (Sweden)

    Yolanda Gamarra Chopo

    2007-06-01

    Full Text Available The 9-11 terrorist attacks had serious repercussions on the world stage, giving rise, among other effects, to a protracted debate on the conditions in which the use of force to fight against terrorism might be justified or not under international law. In the UnitedStates, there were those who advocated in favour of pre-emptive action against the terrorists, and those who were protecting and harbouring them, within the framework of a large scale ‘war’ against terrorism. This gave rise to the ‘Bush doctrine’ of the ‘pre-emptive attack’ to fight against international terrorism and those who possessed weapons of mass destruction that might be used against opponents or for terrorist purposes. Although some people feltthat this version of ‘pre-emption’ in the unilateral use of force strayed from the traditional parameters of self-defence, others considered it to be an adaptation of these parameters to the new needs arising from the threat posed by terrorist groups and outlaw states.

  17. Destruction of metallic foils under laser radiation

    International Nuclear Information System (INIS)

    Khokhlov, N.P.; Lisitsyn, Yu.V.; Mineev, V.N.; Ivanov, A.G.

    1975-01-01

    Experimental results are presented which illustrate the process of destruction of aluminium, lead and tantalum foils under irradiation of a neodymium laser, working in free generation regime with a power density varying from 5.10 5 - 5.10 6 wt/sq.cm. Calorimeters and photocells sensitive to the radiation with lambda=1.06 have been used for measuring the energy and recording the shape of the radiation pulse incident onto the target and passing through the disintegration products. The weight of the target has been determined prior to and after the experiment to find out the weight of Δm material expelled from the target. Rates of product scattering and a target destruction period, an amount of the material expelled and parameters of the radiation passing through the disintegration products have been determined as a function of the power density and an angle of the radiation incidence on the surface of the specimens. Average densities and absorption coefficients of the disintegration products of the foils under study have been assessed. A comparison of the characteristics of the metal foil (t 1 j) destruction in Pb-Ta-Al series with the metal thermal properties in this series shows that the destruction characteristics periodically vary as heat capacity, thermal conduction, evaporation heat and melting heat alter. A period of the target destruction becomes longer and the expelled mass smaller as the aforesaid thermal properties of the metals in Pb-Ta-Al series intensity [ru

  18. Sr/Ca mass ratio determination in bones using fast neutron activation analysis

    International Nuclear Information System (INIS)

    Hult, Mikael; Fessler, Andreas

    1998-01-01

    The Sr/Ca mass ratio in human bones reveals information regarding the diet which is of interest in archaeology. By using fast neutron activation analysis this ratio can be measured in a non-destructive manner, which is important when bones are considered too precious to allow for destructive analysis. Simulations and measurements showed that the nuclear reactions 88 Sr(n, 2n) 87m Sr and 44 Ca(n, p) 44 K are highly useful for the purpose

  19. Is mass media beneficial or not for the information of the general public?

    Science.gov (United States)

    Stavinschi, M.; Mosoia, C.

    2005-11-01

    The International Year of Physics reminds us, among other things, of the way in which Einstein became famous. In spite of all his remarkable scientific results, without the contribution of the press he would not have become so well known in the entire world as he was and continues to be after a century. And he is not the unique example of celebrity due to mass media (see Carl Sagan or Stephen Hawking). In 1969 the first man stepped on the Moon. It was maybe the first cosmic event, which became famous due to a live TV broadcast. Others followed, if we are to mention only the total solar eclipse of 1999 or Venus's transit of last year. Consequently, mass media can make a scientist famous, can also make an event understood and admired and can attract hundreds or maybe millions of people to science. The same mass media can also destroy a personality or an event. We shall give only two examples: the distrust of many people concerning the same Moon landing or the manipulation of millions of people by means of astrology. All this urges us to make a very thorough analysis of the way in which scientific information is communicated to the general public: well done, it can be beneficial; otherwise it may drive the new generations away from research, the understanding of the phenomena, the neglect of the environment and finally from the neglect and the destruction of our own planet.

  20. OLDAPS - obsidian least destructive analysis provenancing system: an application study

    International Nuclear Information System (INIS)

    Eder, F.

    2013-01-01

    The natural volcanic glass obsidian is one of the classical objects of archaeometric analyses. Obsidian is generally described as a relatively homogeneous material and although the number of applicable geological sources is limited, numerous obsidian finds have been found all over the world far away from any natural outcrop. Reliable provenancing by means of the highly specific chemical composition, the 'chemical fingerprint', can provide information about trading routes, extension of territory, long-distance contacts and the mobility of prehistoric people. Several museum collections contain large numbers of unidentified obsidian finds. Therefore, a novel scientific approach for provenancing obsidian artefacts found in archaeological contexts is demanded. The establishment of the Obsidian Least Destructive Analysis Provenancing System (OLDAPS) contributes to both conservation and prehistoric research by ensuring a minimum of destruction to gain a maximum of information. Obsidian samples of seven archaeologically relevant geological obsidian sources in Central and Southern Europe were characterized by the application of three different methods: Neutron Activation Analysis (NAA) Ion Beam Analysis (IBA) comprising of Particle Induced X-ray Emission (PIXE) and Particle Induced Gamma-ray Emission (PIGE) Laser Ablation-Inductively Coupled Plasma-Mass Spectrometry (LA-ICP-MS) The reproducibility and accuracy of analytical data is demonstrated by the excellent agreement between determined analytical results and certified values of glassy reference material BAM-S005B. The combination of methods shows a maximum element spectrum composed of 42 elements and reveals the most characteristic -key elements-, in particular Ti, Co, As, Rb, Ba, Eu and U, by which all seven obsidian sources are cleary discriminable. OLDAPS developed the following analytical strategy to provenance archaeological obsidian, which most likely stem from Central or Southern Europe: The application

  1. Non-destructive Engineering

    International Nuclear Information System (INIS)

    Ko, Jin Hyeon; Ryu, Taek In; Ko, Jun Bin; Hwang, Yong Hwa

    2006-08-01

    This book gives descriptions of non-destructive engineering on outline of non-destructive test, weld defects, radiographic inspection radiography, ultrasonic inspection, magnetic particle testing, liquid penetrant testing, eddy current inspection method, strain measurement, acoustic emission inspection method, other non-destructive testing like leakage inspection method, and non-destructive mechanics for fault analysis such as Griffiths creaking theory, and stress analysis of creaking.

  2. DESTRUCTION OF INTERSTELLAR DUST IN EVOLVING SUPERNOVA REMNANT SHOCK WAVES

    International Nuclear Information System (INIS)

    Slavin, Jonathan D.; Dwek, Eli; Jones, Anthony P.

    2015-01-01

    Supernova generated shock waves are responsible for most of the destruction of dust grains in the interstellar medium (ISM). Calculations of the dust destruction timescale have so far been carried out using plane parallel steady shocks, however, that approximation breaks down when the destruction timescale becomes longer than that for the evolution of the supernova remnant (SNR) shock. In this paper we present new calculations of grain destruction in evolving, radiative SNRs. To facilitate comparison with the previous study by Jones et al., we adopt the same dust properties as in that paper. We find that the efficiencies of grain destruction are most divergent from those for a steady shock when the thermal history of a shocked gas parcel in the SNR differs significantly from that behind a steady shock. This occurs in shocks with velocities ≳200 km s −1 for which the remnant is just beginning to go radiative. Assuming SNRs evolve in a warm phase dominated ISM, we find dust destruction timescales are increased by a factor of ∼2 compared to those of Jones et al., who assumed a hot gas dominated ISM. Recent estimates of supernova rates and ISM mass lead to another factor of ∼3 increase in the destruction timescales, resulting in a silicate grain destruction timescale of ∼2–3 Gyr. These increases, while not able to resolve the problem of the discrepant timescales for silicate grain destruction and creation, are an important step toward understanding the origin and evolution of dust in the ISM

  3. Non-destructive and destructive examination of the retired North Anna 2 Reactor Pressure Vessel Head

    International Nuclear Information System (INIS)

    Ahluwalia, Kawaljit; Barnes, Robert; Rao, Gutti; Cattant, Francois; Peat, Noel

    2006-09-01

    Stress corrosion cracking of Alloy 600 and nickel-based weld materials has been the single biggest challenge facing the PWR industry. A fundamental and thorough knowledge was needed to properly explain this phenomenon and develop appropriate mitigation strategies. Non Destructive Examination (NDE) of the North Anna Unit 2 Reactor Vessel Head (RVH) during the 2002 fall outage identified widespread crack indications in the Alloy 600 CRDM penetrations and associated Alloy 182 and 82 J-groove attachment welds. When the Utility decided to replace the RVH, a rare opportunity was provided to the industry to undertake in-depth studies of representative defective CRDM penetrations from a retired RVH. Accordingly, the Materials Reliability Program, undertook a two-phase program on the retired North Anna 2 Alloy 600 RVH. The first phase involved selection and removal of six penetrations from the RVH and penetration decontamination, replication and laboratory NDE. The second phase consisted of a detailed destructive examination of penetration number 54. This paper provides a summary of work undertaken during this program. Criteria for selection of penetrations for removal and procedures used in removal of the penetrations are described. Extreme care was undertaken in decontamination of the penetrations to facilitate laboratory NDE. Penetration number 54 was then subjected to destructive examination to establish a correlation between NDE findings (from both field and laboratory inspections) and actual flaws. Additional objectives of the destructive examination included mechanistic assessment of defect formation and investigation of the annulus environment and wastage characterization. Data obtained from these studies is invaluable in validating safety assessment statements by developing the correlation between field NDE and actual defects. In addition, information gathered from non-destructive and destructive examinations is used to assess accuracy of the NDE techniques

  4. Toward Mass Customization of Health Information

    Science.gov (United States)

    de la Cruz, Norberto B.; Kahn, Charles E.

    1999-01-01

    As a part of its community outreach efforts, the Medical College of Wisconsin developed the “MCW HealthLink” health information resource. The philosophy, design and implementation of the site lend well to steering future developments towards mass customization of health information.

  5. DUST DESTRUCTION RATES AND LIFETIMES IN THE MAGELLANIC CLOUDS

    Energy Technology Data Exchange (ETDEWEB)

    Temim, Tea; Dwek, Eli; Boyer, Martha L. [Observational Cosmology Lab, Code 665, NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Tchernyshyov, Kirill; Meixner, Margaret [Department of Physics and Astronomy, The Johns Hopkins University, 366 Bloomberg Center, 3400 North Charles Street, Baltimore, MD 21218 (United States); Gall, Christa [Department of Physics and Astronomy, Aarhus University, Ny Munkegade 120, DK-8000 Aarhus C (Denmark); Roman-Duval, Julia, E-mail: tea.temim@nasa.gov [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States)

    2015-02-01

    The dust budget in galaxies depends on the rate at which dust grains are created in different stellar sources and destroyed by interstellar shocks. Because of their extensive wavelength coverage, proximity, and nearly face-on geometry, the Magellanic Clouds (MCs) provide a unique opportunity to study these processes in great detail. In this paper, we use the complete sample of supernova remnants (SNRs) in the MCs to calculate the lifetimes and destruction efficiencies of silicate and carbon dust. We find dust lifetimes of 22 ± 13 Myr (30 ± 17 Myr) for silicate (carbon) grains in the LMC, and 54 ± 32 Myr (72 ± 43 Myr) for silicate (carbon) grains in the SMC. The corresponding dust destruction rates are 2.3 × 10{sup –2} M {sub ☉} yr{sup –1} (5.9 × 10{sup –3} M {sub ☉} yr{sup –1}) and 3.0 × 10{sup –3} M {sub ☉} yr{sup –1} (5.6 × 10{sup –4} M {sub ☉} yr{sup –1}) for silicate (carbon) grains in the LMC and SMC, respectively. The significantly shorter lifetimes in the MCs, as compared to the Milky Way, are explained as the combined effect of their lower total dust mass and preferentially higher dust-to-gas (D2G) mass ratios in the vicinity of the SNRs. We find that the maximum dust injection rates by asymptotic giant branch stars and core collapse supernovae are an order of magnitude lower than the dust destruction rates by the SNRs, suggesting that most of the dust may be reconstituted in dense molecular clouds. We also discuss the dependence of the dust destruction rate on the local D2G mass ratio, ambient gas density, and metallicity, as well as the application of our results to other galaxies and dust evolution models.

  6. Masses management in the epoch of the consumer society

    Directory of Open Access Journals (Sweden)

    M. A. Zubarieva

    2015-01-01

    Full Text Available The article examines the nature and origins of the idea of the phenomenon of mass, the mass consciousness, determinants of social and political science and philosophical aspects. The influence of external factors on the installation of the masses in the context of socio­psychological, informational  and communicational  components is analyzed. The main characteristics of the consumer society: mass consumption of goods and the formation of an appropriate system of values and attitudes are identified. Outlined the difficulties faced by the researcher mass phenomenon. The theory of Jean Baudrillard about simulation in the media is observed. The views of scientific information and interdependence of meaning, the essential characteristics of the simulation are  investigated. Signs of mass properties: missing attribute, predicate, quality, references are demonstrated. The issue of media terrorism and its impact on the consciousness of the masses in the context of the information war between Russia and Ukraine is examined, the main kinds of informational terrorism and the threats to the informational safety, also the degree of their danger is valued.  The reaction of mass media on terrorism, including the emergence of ethnic conflicts, destructive phenomena in society (depression, disappointment in the state, etc. are shown. The recommendations for effective management of the masses in the era of consumer society, the ability to resist attempts to manipulate them through information flows are provided.

  7. Influence of Kaolin in Fly Ash Based Geopolymer Concrete: Destructive and Non-Destructive Testing

    Science.gov (United States)

    Yahya, Z.; Abdullah, M. M. A. B.; Ramli, N. Mohd; Burduhos-Nergis, D. D.; Razak, R. Abd

    2018-06-01

    Development of geopolymer concrete is mainly to reduce the production of ordinary Portland cement (OPC) that adverse the natural effect. Fly ash is a by-product collected from electrical generating power plant which resulted from burning pulverized coal. Since fly ash is waste materials, it can be recycled for future advantages particularly as pozzolanic materials in construction industry. This study focused on the feasibility of fly ash based geopolymer concrete to which kaolin has been added. The main constituents of geopolymer production for this study were class F fly ash, sodium silicate and sodium hydroxide (NaOH) solution. The concentration of NaOH solution was fixed at 12 Molar, ratio of fly ash/alkaline activator and sodium silicate/NaOH fixed at 1.5 and 2.5, respectively. Kaolin was added in range 5% to 15% from the mass of fly ash and all the samples were cured at room temperature. Destructive and non-destructive test were performed on geopolymer concrete to evaluate the best mix proportions that yield the highest strength as well as the quality of the concrete. Compressive strength, flexural strength, rebound hammer and ultrasonic pulse velocity (UPV) result have been obtained. It shown that 5% replacement of kaolin contributed to maximum compressive strength and flexural strength of 40.4 MPa and 12.35 MPa at 28 days. These result was supported by non-destructive test for the same mix proportion.

  8. Information feedback and mass media effects in cultural dynamics

    OpenAIRE

    Gonzalez-Avella, J. C.; Cosenza, M. G.; Klemm, K.; Eguiluz, V. M.; Miguel, M. San

    2007-01-01

    We study the effects of different forms of information feedback associated with mass media on an agent-agent based model of the dynamics of cultural dissemination. In addition to some processes previously considered, we also examine a model of local mass media influence in cultural dynamics. Two mechanisms of information feedback are investigated: (i) direct mass media influence, where local or global mass media act as an additional element in the network of interactions of each agent, and (i...

  9. Chondrule destruction in nebular shocks

    Energy Technology Data Exchange (ETDEWEB)

    Jacquet, Emmanuel; Thompson, Christopher, E-mail: ejacquet@mnhn.fr [Canadian Institute for Theoretical Astrophysics, University of Toronto, 60 St George Street, Toronto, ON M5S 3H8 (Canada)

    2014-12-10

    Chondrules are millimeter-sized silicate spherules ubiquitous in primitive meteorites, but whose origin remains mysterious. One of the main proposed mechanisms for producing them is melting of solids in shock waves in the gaseous protoplanetary disk. However, evidence is mounting that chondrule-forming regions were enriched in solids well above solar abundances. Given the high velocities involved in shock models, destructive collisions would be expected between differently sized grains after passage of the shock front as a result of differential drag. We investigate the probability and outcome of collisions of particles behind a one-dimensional shock using analytic methods as well as a full integration of the coupled mass, momentum, energy, and radiation equations. Destruction of protochondrules seems unavoidable for solid/gas ratios ε ≳ 0.1, and possibly even for solar abundances because of 'sandblasting' by finer dust. A flow with ε ≳ 10 requires much smaller shock velocities (∼2 versus 8 km s{sup –1}) in order to achieve chondrule-melting temperatures, and radiation trapping allows slow cooling of the shocked fragments. Initial destruction would still be extensive; although re-assembly of millimeter-sized particles would naturally occur by grain sticking afterward, the compositional heterogeneity of chondrules may be difficult to reproduce. We finally note that solids passing through small-scale bow shocks around few kilometer-sized planetesimals might experience partial melting and yet escape fragmentation.

  10. X-231A demonstration of in-situ remediation of DNAPL compounds in low permeability media by soil fracturing with thermally enhanced mass recovery or reactive barrier destruction

    International Nuclear Information System (INIS)

    Siegrist, R.L.; Slack, W.W.; Houk, T.C.

    1998-03-01

    The overall goal of the program of activities is to demonstrate robust and cost-effective technologies for in situ remediation of DNAPL compounds in low permeability media (LPM), including adaptations and enhancements of conventional technologies to achieve improved performance for DNAPLs in LPM. The technologies sought should be potential for application at simple, small sites (e.g., gasoline underground storage tanks) as well as at complex, larger sites (e.g., DOE land treatment units). The technologies involved in the X-231A demonstration at Portsmouth Gaseous Diffusion Plant (PORTS) utilized subsurface manipulation of the LPM through soil fracturing with thermally enhanced mass recovery or horizontal barrier in place destruction. To enable field evaluation of these approaches, a set of four test cells was established at the X-231A land treatment unit at the DOE PORTS plant in August 1996 and a series of demonstration field activities occurred through December 1997. The principal objectives of the PORTS X-231A demonstration were to: determine and compare the operational features of hydraulic fractures as an enabling technology for steam and hot air enhanced soil vapor extraction and mass recovery, in situ interception and reductive destruction by zero valent iron, and in situ interception and oxidative destruction by potassium permanganate; determine the interaction of the delivered agents with the LPM matrix adjacent to the fracture and within the fractured zone and assess the beneficial modifications to the transport and/or reaction properties of the LPM deposit; and determine the remediation efficiency achieved by each of the technology strategies

  11. Iraq and After: Taking the Right Lessons for Combating Weapons of Mass Destruction

    National Research Council Canada - National Science Library

    Eisenstadt, Michael

    2005-01-01

    .... Such a reassessment must be highly speculative. Much about Iraq's WMD programs is likely to remain a mystery due to the destruction of records and the looting of facilities following the fall of Baghdad, as well as the continuing silence of many...

  12. Terror weapons. Ridding the world of nuclear, biological and chemical weapons - Commission on mass destruction weapons; Armes de terreur. Debarrasser le monde des armes nucleaires, biologiques et chimiques - Commission sur les armes de destruction massive

    Energy Technology Data Exchange (ETDEWEB)

    Blix, H.; Journe, V.

    2010-07-01

    This book approaches in 8 chapters the ambitious challenge of ridding the world of all mass destruction weapons: 1 - re-launching disarmament; 2 - terror weapons: nature of threats and answers (weakness of traditional answers, counter-proliferation); 3 - nuclear weapons: preventing proliferation and terrorism, reducing threat and nuclear weapons number, from regulation to banning); 4 - biological or toxin weapons; 5 - chemical weapons; 6 - vectors, anti-missile defenses and space weapons; 7 - exports control, international assistance and non-governmental actors; 8 - respect, verification, enforcement and role of the United Nations. The recommendations and works of the Commission are presented in appendix together with the declaration adopted on April 30, 2009. (J.S.)

  13. Development of hotcell non-destructive examination techniques

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Uhn; Yu, S. C.; Kang, B. S.; Byun, K. S. [Chungbuk National University, Chungju (Korea)

    2002-01-01

    The purpose of this project is to establish non-destructive examination techniques which needs to determine the status of spent nuclear fuel and/or bundles. Through the project, we will establish an image reconstruction tomography which is a kind of non-destructive techniques in Hotcell. The tomography technique can be used to identify the 2-dimensional density distribution of fission products in the spent fuel rods and/or bundles. And form results of the measurement and analysis of magnetic properties of neutron irradiated material in the press vessel and reactor, we will develop some techniques to test its hardness and defects. In 2001, the first year, we have established mathematical background and necessary data and informations to develop the techniques. We will try to find some experimental results that are necessary in developing the Hotcell non-destructive examination techniques in the coming year. 14 refs., 65 figs., 5 tabs. (Author)

  14. Weapons of Mass Destruction Commission, final report, 'Weapons of Terror: Freeing the World of Nuclear, Biological, and Chemical Arms', Stockholm, Sweden, 1 June 2006

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    Nuclear, biological and chemical weapons are rightly called weapons of mass destruction (WMD). Designed to terrify as well as destroy, they have the potential to kill thousands and thousands of people in a single attack, and their effects may persist in the environment and in our bodies, in some cases indefinitely. Many efforts have been made to free the world from the threat of these weapons and some progress has been made. Paradoxically, despite the end of the Cold War, the past decade has seen more setbacks than successes. States have failed to comply with their disarmament and non-proliferation commitments, and terrorist groups have emerged that recognize no restraints. In September 2005, the United Nations World Summit was unable to agree on a single recommendation on disarmament and non-proliferation. It is time for all to wake up to the awesome reality that many of the old threats continue to hang over the world and that many new ones have emerged. It is time for all governments to revive their cooperation and to breathe new life into the disarmament work of the United Nations. Efforts to eradicate poverty and to protect the global environment must be matched by a dismantling of the world's most destructive capabilities. The gearshift now needs to be moved from reverse to drive. Biological and chemical weapons have been comprehensively outlawed through global conventions, but these need to be universally accepted and fully implemented. Nuclear weapons must also be outlawed. Before this aim is realized, there must be new initiatives to reduce the number of nuclear weapons and the threat posed by them. It is equally urgent to prevent proliferation and to take special measures to ensure that terrorists do not acquire any weapons of mass destruction. This report presents ideas and recommendations on what the world community - including national governments and civil society - can and should do.

  15. Weapons of Mass Destruction Commission, final report, 'Weapons of Terror: Freeing the World of Nuclear, Biological, and Chemical Arms', Stockholm, Sweden, 1 June 2006

    International Nuclear Information System (INIS)

    2006-01-01

    Nuclear, biological and chemical weapons are rightly called weapons of mass destruction (WMD). Designed to terrify as well as destroy, they have the potential to kill thousands and thousands of people in a single attack, and their effects may persist in the environment and in our bodies, in some cases indefinitely. Many efforts have been made to free the world from the threat of these weapons and some progress has been made. Paradoxically, despite the end of the Cold War, the past decade has seen more setbacks than successes. States have failed to comply with their disarmament and non-proliferation commitments, and terrorist groups have emerged that recognize no restraints. In September 2005, the United Nations World Summit was unable to agree on a single recommendation on disarmament and non-proliferation. It is time for all to wake up to the awesome reality that many of the old threats continue to hang over the world and that many new ones have emerged. It is time for all governments to revive their cooperation and to breathe new life into the disarmament work of the United Nations. Efforts to eradicate poverty and to protect the global environment must be matched by a dismantling of the world's most destructive capabilities. The gearshift now needs to be moved from reverse to drive. Biological and chemical weapons have been comprehensively outlawed through global conventions, but these need to be universally accepted and fully implemented. Nuclear weapons must also be outlawed. Before this aim is realized, there must be new initiatives to reduce the number of nuclear weapons and the threat posed by them. It is equally urgent to prevent proliferation and to take special measures to ensure that terrorists do not acquire any weapons of mass destruction. This report presents ideas and recommendations on what the world community - including national governments and civil society - can and should do

  16. Principles of establishing a Middle East Weapons of Mass Destruction Free Zone (MEWMDFZ)

    International Nuclear Information System (INIS)

    Hammad, F.H.; Ali, Adel M.

    2001-01-01

    The Middle East is one of the most dangerous regions in the world. It has suffered conflicts and wars - with weapons of mass destruction (WMD) implications - at higher frequency and intensity than any other region during the last 60 years. The Middle East was the largest importer of conventional weapons in the world since the second gulf war and the UNSCR 687, which aimed at destroying the Iraqi WMD capabilities and capacity. This arms race is fueled by stockpiles of nuclear and other WMD. In addition several countries remain outside the global nonproliferation and disarmament regimes such as the NPT, CWC and BWC. The situation is further complicated by the serious problems facing the Middle East peace process, which is not only threatening peace and security in the region but also in the world. This unstable risky situation cannot continue like this and cannot be handled step by step any more. The establishing of a MEWMDFZ in the context of a regional security system is the only way out. It is a difficult and remote objective but a tenable one. It is essential to work out the technical, legal and political framework of the envisaged system. This paper deals with efforts undertaken to establish a MEWMDFZ and the development of the underlying principles, based on lessons learnt from the evolution of NWFZs as well as regional and global nonproliferation, arms control and disarmament (NPACD) developments

  17. Information Fusion and Extraction Priorities for Australia’s Information Capability

    Science.gov (United States)

    2004-03-01

    also been in response to the global threats of terrorism and the utilisation of weapons of mass destruction or long-range ballistic missiles by...missiles and weapons of mass destruction by rogue states [4]. Accordingly, “maintaining first-rate intelligence capabilities, developing a comprehensive...number of customised views. For example, temporal data based on a particular activity may be displayed in a variety of modes on a grid or clock face

  18. Economic importance of non-destructive testing

    International Nuclear Information System (INIS)

    Loebert, P.

    1979-01-01

    On May 21 to 23, 1979, the annual meeting of the Deutsche Gesellschaft fuer Zerstoerungsfreie Pruefung took place in Lindau near the Bodensee lake. About 600 experts from Germany and abroad participated in the meeting, whose general subject was 'The Economic Importance of Non-Destructive Testing'. Theoretical problems and practical investigations were discussed in a number of papers on special subjects. Apart from the 33 papers, there was also a poster show with 53 stands with texts, drawings, diagrams, and figures where the authors informed those interested on the latest state of knowledge in testing. The short papers were read in six sessions under the headings of rentability of non-destructive testing, X-ray methods, electromagnetic methods, and ultrasonic methods 1 and 2. (orig.) [de

  19. Non-destructive microstructural analysis with depth resolution

    Energy Technology Data Exchange (ETDEWEB)

    Zolotoyabko, E. E-mail: zloto@tx.technion.ac.il; Quintana, J.P

    2003-01-01

    A depth-sensitive X-ray diffraction technique has been developed with the aim of studying microstructural modifications in inhomogeneous polycrystalline materials. In that method, diffraction profiles are measured at different X-ray energies varied by small steps. X-rays at higher energies probe deeper layers of material. Depth-resolved structural information is retrieved by comparing energy-dependent diffraction profiles. The method provides non-destructive depth profiling of the preferred orientation, grain size, microstrain fluctuations and residual strains. This technique is applied to the characterization of seashells. Similarly, energy-variable X-ray diffraction can be used for the non-destructive characterization of different laminated structures and composite materials.

  20. Analytical technique to address terrorist threats by chemical weapons of mass destruction

    Science.gov (United States)

    Dempsey, Patrick M.

    1997-01-01

    Terrorism is no longer an issue without effect on the American mind. We now live with the same concerns and fears that have been commonplace in other developed and third world countries for a long time. Citizens of other countries have long lived with the specter of terrorism and now the U.S. needs to be concerned and prepared for terrorist activities.T he terrorist has the ability to cause great destructive effects by focusing their effort on unaware and unprepared civilian populations. Attacks can range from simple explosives to sophisticated nuclear, chemical and biological weapons. Intentional chemical releases of hazardous chemicals or chemical warfare agents pose a great threat because of their ready availability and/or ease of production, and their ability to cause widespread damage. As this battlefront changes from defined conflicts and enemies to unnamed terrorists, we must implement the proper analytical tools to provide a fast and efficient response. Each chemical uses in a terrorists weapon leaves behind a chemical signature that can be used to identify the materials involved and possibly lead investigators to the source and to those responsible. New tools to provide fast and accurate detection for battlefield chemical and biological agent attack are emerging. Gas chromatography/mass spectrometry (GC/MS) is one of these tools that has found increasing use by the military to respond to chemical agent attacks. As the technology becomes smaller and more portable, it can be used by law enforcement personnel to identify suspected terrorist releases and to help prepare the response; define contaminated areas for evacuation and safety concerns, identify the proper treatment of exposed or affected civilians, and suggest decontamination and cleanup procedures.

  1. Mass measurements on neutron-deficient nuclides at SHIPTRAP and commissioning of a cryogenic narrow-band FT-ICR mass spectrometer

    Energy Technology Data Exchange (ETDEWEB)

    Ferrer Garcia, R.

    2007-07-01

    The dissertation presented here deals with high-precision Penning trap mass spectrometry on short-lived radionuclides. Owed to the ability of revealing all nucleonic interactions, mass measurements far off the line of {beta}-stability are expected to bring new insight to the current knowledge of nuclear properties and serve to test the predictive power of mass models and formulas. In nuclear astrophysics, atomic masses are fundamental parameters for the understanding of the synthesis of nuclei in the stellar environments. This thesis presents ten mass values of radionuclides around A=90 interspersed in the predicted rp-process pathway. Six of them have been experimentally determined for the first time. The measurements have been carried out at the Penning-trap mass spectrometer SHIPTRAP using the destructive time-of-flight ion-cyclotron-resonance (TOF-ICR) detection technique. Given the limited performance of the TOF-ICR detection when trying to investigate heavy/superheavy species with small production cross sections ({sigma} <1 {mu}b), a new detection system is found to be necessary. Thus, the second part of this thesis deals with the commissioning of a cryogenic double-Penning trap system for the application of a highly-sensitive, narrow-band Fourier-transform ion-cyclotron-resonance (FT-ICR) detection technique. With the non-destructive FT-ICR detection method a single singly-charged trapped ion will provide the required information to determine its mass. First off-line tests of a new detector system based on a channeltron with an attached conversion dynode, of a cryogenic pumping barrier, to guarantee ultra-high vacuum conditions during mass determination, and of the detection electronics for the required single-ion sensitivity are reported. (orig.)

  2. [An objective of the education of mankind: delegated destructiveness. Mass murder of psychiatric patients in Hitler Germany].

    Science.gov (United States)

    Scharfetter, C

    1984-01-01

    The extermination of 100,000 inpatients of mental hospitals and 5,000 mentally retarded children in NAZI-Germany under the Hitler régime between 1939 and 1941 is reported. The ideological precursors of these actions are traced. The ethological and anthropological aspects of inner-species destruction in the phylogenesis of mankind are traced. Psychological and social conditions of social destructiveness under "normal" and exceptional conditions are discussed and the consequences for education drawn.

  3. 9 CFR 51.6 - Destruction of animals; time limit for destruction of animals.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Destruction of animals; time limit for destruction of animals. 51.6 Section 51.6 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION... ANIMALS DESTROYED BECAUSE OF BRUCELLOSIS Indemnity for Cattle, Bison, and Swine § 51.6 Destruction of...

  4. Different methods of tomography in destructive pulmonary tuberculosis

    International Nuclear Information System (INIS)

    Volodina, G.I.; Semenov, V.M.

    1980-01-01

    Altogether 203 patients (186 with destructive pulmonary tuberculosis, 11 with other forms of tuberculosis of respiratory tract organs, 6 with lung malignant tumor) were examined with the use of different modifications of tomography: longitudinal and oblique blurring, zonography, selective tomography. Standardization in the use of different methods is proposed, depending on the intensity of the main syndromes of pulmonary tissue lesions: limited shading, foci, dissemination, caverns, etc. The informativeness is greatly increased when the proposed algorithm of examination is used both at the disease onset and during the follow-up of patients with destructive pulmonary tuberculosis

  5. Maximum mass-particle velocities in Kantor's information mechanics

    International Nuclear Information System (INIS)

    Sverdlik, D.I.

    1989-01-01

    Kantor's information mechanics links phenomena previously regarded as not treatable by a single theory. It is used here to calculate the maximum velocities υ m of single particles. For the electron, υ m /c ∼ 1 - 1.253814 x 10 -77 . The maximum υ m corresponds to υ m /c ∼ 1 -1.097864 x 10 -122 for a single mass particle with a rest mass of 3.078496 x 10 -5 g. This is the fastest that matter can move. Either information mechanics or classical mechanics can be used to show that υ m is less for heavier particles. That υ m is less for lighter particles can be deduced from an information mechanics argument alone

  6. Examination of the mass media process and personal factors affecting the assessment of mass media-disseminated health information.

    Science.gov (United States)

    Avcı, Kadriye; Çakır, Tülin; Avşar, Zakir; Üzel Taş, Hanife

    2015-06-01

    This study examined the mass media and personal characteristics leading to health communication inequality as well as the role of certain factors in health communication's mass media process. Using both sociodemographic variables and Maletzke's model as a basis, we investigated the relationship between selected components of the mass communication process, the receiving of reliable health information as a result of health communication, and the condition of its use. The study involved 1853 people in Turkey and was structured in two parts. The first part dealt with questions regarding sociodemographic characteristics, the use of the mass media and the public's ability to obtain health information from it, the public's perception of the trustworthiness of health information, and the state of translating this information into health-promoting behaviours. In the second part, questions related to the mass communication process were posed using a five-point Likert scale. This section tried to establish structural equation modelling using the judgements prepared on the basis of the mass media model. Through this study, it has been observed that sociodemographic factors such as education and age affect individuals' use of and access to communication channels; individuals' trust in and selection of health information from the programme content and their changing health behaviours (as a result of the health information) are related to both their perception of the mass communication process and to sociodemographic factors, but are more strongly related to the former. © The Author(s) 2014.

  7. Destructiveness in Political Discourse

    Directory of Open Access Journals (Sweden)

    Яна Александровна Волкова

    2016-12-01

    Full Text Available Destructiveness is among the fundamental discourse categories that play a significant role in the organization of communicative interaction and define the pragmatics of discourse; its study helps to understand some mechanisms and principles of communication, identify strategies and tactics used by a destructive communicative personality. The relevance of this study is determined by the increasing aggressiveness in various types of discourse, and, accordingly, by the need to extend the knowledge of destructive behavior of a communicative personality. The study is based on the theory of discourse-analysis and theory of destructiveness (Z. Harris, T. van Dijk, A. Buss, E. Fromm, D. Ponton, K. Hacker, R. Wodak. N. Arutyunova, V. Karasik, M. Makarov, E. Sheigal et al. Developing the theory of destructiveness and relying on Erich Fromm’s research (1973, we specify the concept of “destructiveness” in relation to the political discourse and compare it with the related concept of aggressiveness. The paper analyses the category of destructiveness in modern US political discourse, using excerpts from the speeches of the candidates for presidency of 2016. Particular attention is paid to the dominant destructive intention - to harm the reputation of the opponent and reduce his political chances, as well as to the functions of verbal aggression: on the one hand - to discredit the opponent, bring accusations, on the other hand - to poison the audience mind against him/her and arouse the feeling of danger posed by a political opponent. The analysis of verbal and nonverbal means of destructiveness in the US political discourse is carried out. The article concludes that abusive remarks of politicians do not result from spontaneous emotional outburst, but from an elaborated destructive strategy where the agonistic nature of political discourse stipulates the use of instrumental aggression (Buss, 1971 for the sake of the conquest of power, lowering the

  8. 28 CFR 25.9 - Retention and destruction of records in the system.

    Science.gov (United States)

    2010-07-01

    ... INFORMATION SYSTEMS The National Instant Criminal Background Check System § 25.9 Retention and destruction of... receives communication of the determination that the transfer may proceed. All other information, except...

  9. Analysis of Radiation Accident of Non-destructive Inspection and Rational Preparing Bills

    International Nuclear Information System (INIS)

    Bae, Junwoo; Yoo, Donghan; Kim, Hee Reyoung

    2013-01-01

    After 2006, according to enactment of Non-destructive Inspection Promotion Act, the number of non-destructive inspection companies and corresponding accident is increased sharply. In this research, it includes characteristic analysis of field of the non-destructive inspection. And from the result of analysis, the purpose of this research is discovering reason for 'Why there is higher accident ratio in non-destructive inspection field, relatively' and preparing effective bill for reducing radiation accidents. The number of worker for non-destructive inspect is increased steadily and non-destructive inspect worker take highest dose. Corresponding to these, it must be needed to prepare bills to protect non-destructive inspect workers. By analysis of accident case, there are many case of carelessness that tools are too heavy to carry it everywhere workers go. And there are some cases caused by deficiency of education that less understanding of radiation and poor operation by less understanding of structure of tools. Also, there is no data specialized to non-destructive inspect field. So, it has to take information from statistical data. Because of this, it is hard to analyze nondestructive inspect field accurately. So, it is required to; preparing rational bills to protect non-destructive inspect workers nondestructive inspect instrument lightening and easy manual which can understandable for low education background people accurate survey data from real worker. To accomplish these, we needs to do; analyze and comprehend the present law about non-destructive inspect worker understand non-destructive inspect instruments accurately and conduct research for developing material developing rational survey to measuring real condition for non-destructive inspect workers

  10. Characterization of spent fuel assemblies for storage facilities using non destructive assay

    International Nuclear Information System (INIS)

    Lebrun, A.; Bignan, G.; Recroix, H.; Huver, M.

    1999-01-01

    Many non destructive assay (NDA) techniques have been developed by the French Atomic Energy Commission (CEA) for spent fuel characterization and management. Passive and active neutron methods as well as gamma spectrometric methods have been carried out and applied to industrial devices like PYTHON TM and NAJA. Many existing NDA methods can be successfully applied to storage, but the most promising are the neutron methods combined with on line evolution codes. For dry storage applications, active neutron measurements require further R and D to achieve accurate results. Characterization data given by NDA instruments can now be linked to automatic fuel recognition. Both information can feed the storage management software in order to meet the storage operation requirements like: fissile mass inventory, operators declaration consistency or automatic selection of proper storage conditions. (author)

  11. DETERMINANTS DESTRUCTIVE TO BUSINESS CONDUCT TRANSPORT

    Directory of Open Access Journals (Sweden)

    Natalia Anatol’evna Loginova

    2017-03-01

    Full Text Available The article examines the determinants of destructive behavior in the transport business with the aim to identify their causes and to clarify the features of influence on them by all business stakeholders in transport. It is shown that the key determinants are: submission to the will of one business entity to another, the implementation of state support only in distressed periods of functioning of transport organizations, business obligations to the state are often perceived as a back-breaking businessmen, unfair, unnecessary. The main conclusions of the work are reduced to the following recommendations: to form a focused pulse of the state in support of the transport business; improve enforcement culture; more efficient use of the transport business capital. The goal – to identify the cause of the destructive business behavior and clarify the characteristics of their research on the part of all stakeholders in the transport sector. Method or methodology of work: in the article used analytical methods, and statistical analysis methods. Results for: received informative pictures that describe deterministic minanaty-destructive conduct business on the road, on the basis of which developed recommendations to neutralize their influence on the behavior of entrepreneurs. Application of results: the results the expediency applied differently businesses and government agencies operating in the field of transport.

  12. Reinforcement Learning Based Data Self-Destruction Scheme for Secured Data Management

    Directory of Open Access Journals (Sweden)

    Young Ki Kim

    2018-04-01

    Full Text Available As technologies and services that leverage cloud computing have evolved, the number of businesses and individuals who use them are increasing rapidly. In the course of using cloud services, as users store and use data that include personal information, research on privacy protection models to protect sensitive information in the cloud environment is becoming more important. As a solution to this problem, a self-destructing scheme has been proposed that prevents the decryption of encrypted user data after a certain period of time using a Distributed Hash Table (DHT network. However, the existing self-destructing scheme does not mention how to set the number of key shares and the threshold value considering the environment of the dynamic DHT network. This paper proposes a method to set the parameters to generate the key shares needed for the self-destructing scheme considering the availability and security of data. The proposed method defines state, action, and reward of the reinforcement learning model based on the similarity of the graph, and applies the self-destructing scheme process by updating the parameter based on the reinforcement learning model. Through the proposed technique, key sharing parameters can be set in consideration of data availability and security in dynamic DHT network environments.

  13. Evidence for midwinter chemical ozone destruction over Antartica

    Energy Technology Data Exchange (ETDEWEB)

    Voemel, H. [Univ. of Colorado, Boulder, CO (United States); Hoffmann, D.J.; Oltmans, S.J.; Harris, J.M. [NOAA Climate Monitoring and Diagnostics Laboratory, Boulder, CO (United States)

    1995-09-01

    Two ozone profiles on June 15 and June 19, obtained over McMurdo, Antartica, showed a strong depletion in stratospheric ozone, and a simultaneous profile of water vapor on June 19 showed the first clear signs of dehydration. The observation of Polar Stratospheric Clouds (PSCs) beginning with the first sounding showing ozone depletion, the indication of rehydration layers, which could be a sign for recent dehydration, and trajectory calculations indicate that the observed low ozone was not the result of transport from lower latitudes. during this time the vortex was strongly distorted, transporting PSC processed air well into sunlit latitudes where photochemical ozone destruction may have occurred. The correlation of ozone depletion and dehydration indicates that water ice PSCs provided the dominant surface for chlorine activation. An analysis of the time when the observed air masses could have formed type II PSCs for the first time limits the time scale for the observed ozone destruction to about 4 days.

  14. Cell wall proteome of sugarcane stems: comparison of a destructive and a non-destructive extraction method showed differences in glycoside hydrolases and peroxidases.

    Science.gov (United States)

    Calderan-Rodrigues, Maria Juliana; Jamet, Elisabeth; Douché, Thibaut; Bonassi, Maria Beatriz Rodrigues; Cataldi, Thaís Regiani; Fonseca, Juliana Guimarães; San Clemente, Hélène; Pont-Lezica, Rafael; Labate, Carlos Alberto

    2016-01-11

    Sugarcane has been used as the main crop for ethanol production for more than 40 years in Brazil. Recently, the production of bioethanol from bagasse and straw, also called second generation (2G) ethanol, became a reality with the first commercial plants started in the USA and Brazil. However, the industrial processes still need to be improved to generate a low cost fuel. One possibility is the remodeling of cell walls, by means of genetic improvement or transgenesis, in order to make the bagasse more accessible to hydrolytic enzymes. We aimed at characterizing the cell wall proteome of young sugarcane culms, to identify proteins involved in cell wall biogenesis. Proteins were extracted from the cell walls of 2-month-old culms using two protocols, non-destructive by vacuum infiltration vs destructive. The proteins were identified by mass spectrometry and bioinformatics. A predicted signal peptide was found in 84 different proteins, called cell wall proteins (CWPs). As expected, the non-destructive method showed a lower percentage of proteins predicted to be intracellular than the destructive one (33% vs 44%). About 19% of CWPs were identified with both methods, whilst the infiltration protocol could lead to the identification of 75% more CWPs. In both cases, the most populated protein functional classes were those of proteins related to lipid metabolism and oxido-reductases. Curiously, a single glycoside hydrolase (GH) was identified using the non-destructive method whereas 10 GHs were found with the destructive one. Quantitative data analysis allowed the identification of the most abundant proteins. The results highlighted the importance of using different protocols to extract proteins from cell walls to expand the coverage of the cell wall proteome. Ten GHs were indicated as possible targets for further studies in order to obtain cell walls less recalcitrant to deconstruction. Therefore, this work contributed to two goals: enlarge the coverage of the sugarcane

  15. Indirect Self-Destructiveness and Emotional Intelligence.

    Science.gov (United States)

    Tsirigotis, Konstantinos

    2016-06-01

    While emotional intelligence may have a favourable influence on the life and psychological and social functioning of the individual, indirect self-destructiveness exerts a rather negative influence. The aim of this study has been to explore possible relations between indirect self-destructiveness and emotional intelligence. A population of 260 individuals (130 females and 130 males) aged 20-30 (mean age of 24.5) was studied by using the Polish version of the chronic self-destructiveness scale and INTE, i.e., the Polish version of the assessing emotions scale. Indirect self-destructiveness has significant correlations with all variables of INTE (overall score, factor I, factor II), and these correlations are negative. The intensity of indirect self-destructiveness differentiates significantly the height of the emotional intelligence and vice versa: the height of the emotional intelligence differentiates significantly the intensity of indirect self-destructiveness. Indirect self-destructiveness has negative correlations with emotional intelligence as well as its components: the ability to recognize emotions and the ability to utilize emotions. The height of emotional intelligence differentiates the intensity of indirect self-destructiveness, and vice versa: the intensity of indirect self-destructiveness differentiates the height of emotional intelligence. It seems advisable to use emotional intelligence in the prophylactic and therapeutic work with persons with various types of disorders, especially with the syndrome of indirect self-destructiveness.

  16. DESTRUCTIVE EXAMINATION OF SHIPPING PACKAGE 9975-06100

    Energy Technology Data Exchange (ETDEWEB)

    Daugherty, W.

    2014-11-07

    Destructive and non-destructive examinations have been performed on specified components of shipping package 9975-06100. This package was selected for examination based on several characteristics: - This was the first destructively examined package in which the fiberboard assembly was fabricated from softwood fiberboard. - The package contained a relatively high heat load to contribute to internal temperature, which is a key environmental factor for fiberboard degradation. - The package has been stored in the middle or top of a storage array since its receipt in K- Area, positions that would contribute to increased service temperatures. No significant changes were observed for attributes that were measured during both field surveillance and destructive examination. Except for the axial gap, all observations and test results met identified criteria, or were collected for information and trending purposes. The axial gap met the 1 inch maximum criterion during field surveillance, but was just over the criterion during SRNL measurements. When re-measured at a later date, it again met the criterion. The bottom of the lower fiberboard assembly and the drum interior had two small stains at matching locations, suggestive of water intrusion. However, the fiberboard assembly did not contain any current evidence of excess moisture. No evidence of a degraded condition was found in this package. Despite exposure to the elevated temperatures of this higher-then-average wattage package, properties of the fiberboard and O-rings are consistent with those of new packages.

  17. Features of destruction of solids by laser radiation in process of formation of multiply charged ions

    International Nuclear Information System (INIS)

    Bedilov, R.M.; Bedilov, M.R.; Sabitov, M.M.; Matnazarov, A.; Niyozov, B.

    2004-01-01

    Full text: It is known, under interaction of laser radiation with solid surface a power density q > 0.01 W/cm 2 are observed destruction of a solid and issue of electrons, ions, neutrals, neutrons, plasmas, and also radiation in a wide ranges of a spectra. Despite of a plenty of works, devoted to study of processes of interaction, the studies of feature of destruction of solids by laser beam in process of formation multiply charged ions are insufficiently investigated. The results of study feature of destruction of solids by laser radiation in process of formation multiply charged ions are given in this work. In our experiments, we used the mass spectrometer with single-channel laser radiation. The laser installation had the following parameters: a power density of laser radiation q=(0.1-50) GW/cm 2 ; the angle of incidence a=18 deg. to the target surface Al, (W). It was obtained experimentally dynamics of morphology of destruction and also mass - charge and energy spectra of multiply charged ions formed under interaction of laser radiation with Al (W) in the intensity range q=(0.1-50) GW/cm 2 . These studies showed features of destruction Al(W) by laser radiation, i.e. invariable of value evaporation mass from a surface of a solid increase as the laser intensity q. But thus temperature a pair increases in accordance with increase of flow density of a laser radiation. Increase of temperature the pair gives in formation of multiply charged plasma. It is typical that, as q of the laser increases the maximum charge number of ions in laser plasma considerably increase and their energy spectra extend toward higher energies. For example, under q=0.1 GW/cm 2 and 50 GW/cm 2 the maximum charge number of ions Al (W) are equal to Z max = 1 and 7, respectively. From the experimental data obtained, we can conclude that, the formed multiply charged plasma practically completely absorption laser radiation and 'shielding' a target surface for various metals at power densities

  18. Does Health Information in Mass Media Help or Hurt Patients? Investigation of Potential Negative Influence of Mass Media Health Information on Patients' Beliefs and Medication Regimen Adherence.

    Science.gov (United States)

    Im, Heewon; Huh, Jisu

    2017-03-01

    As an important public health issue, patient medication non-adherence has drawn much attention, but research on the impact of mass media as an information source on patient medication adherence has been scant. Given that mass media often provide confusing and contradicting information regarding health/medical issues, this study examined the potential negative influence of exposure to health information in mass media on patients' beliefs about their illnesses and medications, and medication adherence, in comparison with the effects of exposure to another primary medication information source, physicians. Survey data obtained from patients on blood thinner regimens revealed that the frequency of exposure to health information in mass media was negatively related to accuracy of patients' beliefs about their medication benefits and patient medication adherence. On the other hand, frequency of visits with physicians was positively associated with patients' beliefs about their medication benefits but had no significant relation to medication regimen adherence. The implications of the study findings are discussed, and methodological limitations and suggestion for future research are presented.

  19. The Problem of Neutralization of Reactionary Masses in the Russian Technologies of CWD

    International Nuclear Information System (INIS)

    Petrov, V.

    2007-01-01

    11, 2006 at Conference of OPCW terms of destruction of the chemical weapon for Russia and USA were prolonged to 5 years, till April, 29, 2012. At all intentions to achieve these terms in the Russian technologies are available a number of technical problems which can complicate works on the CWD. One of them concerns the problems connected to neutralization of reactionary masses of the CWD. In the Russian Federation it is not constructed yet any enterprise for destruction with a full cycle. The question of neutralization of reactionary masses yet does not find the full decision. In this connection there is a threat of that the problem of reactionary masses can appear outside of works on destruction is direct of CW and beyond the framework of 2012. The technical analysis of possible technologies and directions of neutralization of reactionary masses of destruction of lewisite and POS in the Russian technologies of the CWD is carried out. (author)

  20. The Problem of Neutralization of Reactionary Masses in the Russian Technologies of CWD

    Energy Technology Data Exchange (ETDEWEB)

    Petrov, V [Institute of Applied Mechanics UrB of the Russian Academy of Science, Izhevsk (Russian Federation)

    2007-07-01

    11, 2006 at Conference of OPCW terms of destruction of the chemical weapon for Russia and USA were prolonged to 5 years, till April, 29, 2012. At all intentions to achieve these terms in the Russian technologies are available a number of technical problems which can complicate works on the CWD. One of them concerns the problems connected to neutralization of reactionary masses of the CWD. In the Russian Federation it is not constructed yet any enterprise for destruction with a full cycle. The question of neutralization of reactionary masses yet does not find the full decision. In this connection there is a threat of that the problem of reactionary masses can appear outside of works on destruction is direct of CW and beyond the framework of 2012. The technical analysis of possible technologies and directions of neutralization of reactionary masses of destruction of lewisite and POS in the Russian technologies of the CWD is carried out. (author)

  1. Cosmological simulation with dust formation and destruction

    Science.gov (United States)

    Aoyama, Shohei; Hou, Kuan-Chou; Hirashita, Hiroyuki; Nagamine, Kentaro; Shimizu, Ikkoh

    2018-06-01

    To investigate the evolution of dust in a cosmological volume, we perform hydrodynamic simulations, in which the enrichment of metals and dust is treated self-consistently with star formation and stellar feedback. We consider dust evolution driven by dust production in stellar ejecta, dust destruction by sputtering, grain growth by accretion and coagulation, and grain disruption by shattering, and treat small and large grains separately to trace the grain size distribution. After confirming that our model nicely reproduces the observed relation between dust-to-gas ratio and metallicity for nearby galaxies, we concentrate on the dust abundance over the cosmological volume in this paper. The comoving dust mass density has a peak at redshift z ˜ 1-2, coincident with the observationally suggested dustiest epoch in the Universe. In the local Universe, roughly 10 per cent of the dust is contained in the intergalactic medium (IGM), where only 1/3-1/4 of the dust survives against dust destruction by sputtering. We also show that the dust mass function is roughly reproduced at ≲ 108 M⊙, while the massive end still has a discrepancy, which indicates the necessity of stronger feedback in massive galaxies. In addition, our model broadly reproduces the observed radial profile of dust surface density in the circum-galactic medium (CGM). While our model satisfies the observational constraints for the dust extinction on cosmological scales, it predicts that the dust in the CGM and IGM is dominated by large (>0.03 μm) grains, which is in tension with the steep reddening curves observed in the CGM.

  2. Terror and Weapons of Mass Destruction in the Light of Risale-i Nur

    OpenAIRE

    Çengel, Yunus

    2012-01-01

    While technological innovations that are progressing at a head-spinning pace have made life easier and raised the quality of life to levels unimaginable half a century ago, the same technological innovations, when fall into the wrong hands, can turn into dangerous devices that can destroy peace and order, and even threaten the very existence of humanity. The ease of destruction, and the potential of technological wonders being used as weapons of terror have caused people to be concerned and t...

  3. Non-destructive inservice inspections

    International Nuclear Information System (INIS)

    Kauppinen, P.; Sarkimo, M.; Lahdenperae, K.

    1998-01-01

    In order to assess the possible damages occurring in the components and structures of operating nuclear power plants during service the main components and structures are periodically inspected by non-destructive testing techniques. The reliability of non-destructive testing techniques applied in these inservice inspections is of major importance because the decisions concerning the needs for repair of components are mainly based on the results of inspections. One of the targets of this research program has been to improve the reliability of non-destructive testing. This has been addressed in the sub-projects which are briefly summarised here. (author)

  4. Establishment of the effective modes of the slowdown explosion by rocks destruction at quarries

    Directory of Open Access Journals (Sweden)

    О.О. Frolov

    2017-12-01

    Full Text Available Existing for today theoretical modeling tools of the mass explosion do not fully consider the sequence and intensity of destruction of the rock mass. This leads to significant energy losses in the explosion. Therefore, the control of the sequence and modes of micro- and millisecond delayed blasting of systems of borehole charges of explosives in quarries will allow achieving better mass explosion indices. Interaction of the stress waves generated by the individual charges explosion is considered in this work as a way to control the effect of an explosion in a rock mass. It is established that the maximum value of the amount of rocks destruction in the presence of a single plane of exposure depends on the interval of delay between the explosion of the adjacent borehole charges in a group, which, in turn, is determined by the ratio of the distance between charges to the velocity of propagation of longitudinal stress waves in the rock mass. A formula for determining the rational delay interval between bursts of charge groups, which takes into account both the physical and mechanical properties of the rock mass and the main technological parameters of the explosion is proposed. Based on the results of research, the blasting scheme is recommended to be formed taking into account the deceleration intervals between the groups of borehole charges and for adjacent charges placed in one group.

  5. Utility of Quantitative Parameters from Single-Photon Emission Computed Tomography/Computed Tomography in Patients with Destructive Thyroiditis

    Science.gov (United States)

    Kim, Ji-Young; Kim, Ji Hyun; Moon, Jae Hoon; Kim, Kyoung Min; Oh, Tae Jung; Lee, Dong-Hwa; So, Young

    2018-01-01

    Objective Quantitative parameters from Tc-99m pertechnetate single-photon emission computed tomography/computed tomography (SPECT/CT) are emerging as novel diagnostic markers for functional thyroid diseases. We intended to assess the utility of SPECT/CT parameters in patients with destructive thyroiditis. Materials and Methods Thirty-five destructive thyroiditis patients (7 males and 28 females; mean age, 47.3 ± 13.0 years) and 20 euthyroid patients (6 males and 14 females; mean age, 45.0 ± 14.8 years) who underwent Tc-99m pertechnetate quantitative SPECT/CT were retrospectively enrolled. Quantitative parameters from the SPECT/CT (%uptake, standardized uptake value [SUV], thyroid volume, and functional thyroid mass [SUVmean × thyroid volume]) and thyroid hormone levels were investigated to assess correlations and predict the prognosis for destructive thyroiditis. The occurrence of hypothyroidism was the outcome for prognosis. Results All the SPECT/CT quantitative parameters were significantly lower in the 35 destructive thyroiditis patients compared to the 20 euthyroid patients using the same SPECT/CT scanner and protocol (p thyroid-stimulating hormone (TSH) significantly correlated with %uptake (p = 0.004), SUVmean (p thyroid mass (p thyroiditis patients, 16 progressed to hypothyroidism. On univariate and multivariate analyses, only T3 levels were associated with the later occurrence of hypothyroidism (p = 0.002, exp(β) = 1.022, 95% confidence interval: 1.008 – 1.035). Conclusion Novel quantitative SPECT/CT parameters could discriminate patients with destructive thyroiditis from euthyroid patients, suggesting the robustness of the quantitative SPECT/CT approach. However, disease progression of destructive thyroiditis could not be predicted using the parameters, as these only correlated with TSH, but not with T3, the sole predictor of the later occurrence of hypothyroidism. PMID:29713225

  6. Use of border information in the classification of mammographic masses

    International Nuclear Information System (INIS)

    Varela, C; Timp, S; Karssemeijer, N

    2006-01-01

    We are developing a new method to characterize the margin of a mammographic mass lesion to improve the classification of benign and malignant masses. Towards this goal, we designed features that measure the degree of sharpness and microlobulation of mass margins. We calculated these features in a border region of the mass defined as a thin band along the mass contour. The importance of these features in the classification of benign and malignant masses was studied in relation to existing features used for mammographic mass detection. Features were divided into three groups, each representing a different mass segment: the interior region of a mass, the border and the outer area. The interior and the outer area of a mass were characterized using contrast and spiculation measures. Classification was done in two steps. First, features representing each of the three mass segments were merged into a neural network classifier resulting in a single regional classification score for each segment. Secondly, a classifier combined the three single scores into a final output to discriminate between benign and malignant lesions. We compared the classification performance of each regional classifier and the combined classifier on a data set of 1076 biopsy proved masses (590 malignant and 486 benign) from 481 women included in the Digital Database for Screening Mammography. Receiver operating characteristic (ROC) analysis was used to evaluate the accuracy of the classifiers. The area under the ROC curve (A z ) was 0.69 for the interior mass segment, 0.76 for the border segment and 0.75 for the outer mass segment. The performance of the combined classifier was 0.81 for image-based and 0.83 for case-based evaluation. These results show that the combination of information from different mass segments is an effective approach for computer-aided characterization of mammographic masses. An advantage of this approach is that it allows the assessment of the contribution of regions rather

  7. Remote sensing techniques for monitoring the Rio Grande Valley cotton stalk destruction program

    Energy Technology Data Exchange (ETDEWEB)

    Richardson, A.J.; Gerbermann, A.H.; Summy, K.R.; Anderson, G.L. (Department of Agriculture, Weslaco, TX (United States))

    1993-09-01

    Post harvest cotton (Gossypium hirsutum L.) stalk destruction is a cultural practice used in the Rio Grande Valley to suppress over wintering populations of boll weevils (Anthonomus grandis Boheman) without using chemicals. Consistent application of this practice could substantially reduce insecticide usage, thereby minimizing environmental hazards and increasing cotton production profits. Satellite imagery registered within a geographic information system was used to monitor the cotton stalk destruction program in the Rio Grande Valley. We found that cotton stalk screening procedures based on standard multispectral classification techniques could not reliably distinguish cotton from sorghum. Greenness screening for cotton plant stalks after the stalk destruction deadline was possible only where ground observations locating cotton fields were available. These findings indicate that a successful cotton stalk destruction monitoring program will require satellite images and earth referenced data bases showing cotton field locations.

  8. Silicone stent placement for primary tracheal amyloidosis accompanied by cartilage destruction.

    Science.gov (United States)

    Ryu, Duck Hyun; Eom, Jung Seop; Jeong, Ho Jung; Kim, Jung Hoon; Lee, Ji Eun; Jun, Ji Eun; Song, Dae Hyun; Han, Joungho; Kim, Hojoong

    2014-06-01

    Primary tracheal amyloidosis (PTA) can lead to airway obstructions, and patients with severe PTA should undergo bronchoscopic interventions in order to maintain airway patency. Focal airway involvements with amyloidosis can only be treated with mechanical dilatation. However, the PTA with diffused airway involvements and concomitant cartilage destructions requires stent placement. Limited information regarding the usefulness of silicone stents in patients with PTA has been released. Therefore, we report a case of diffused PTA with tracheomalacia causing severe cartilage destruction, which is being successfully managed with bronchoscopic interventions and silicone stent placements.

  9. Organization of medical aid and treatment of victims of mass ionizing radiation injuries

    International Nuclear Information System (INIS)

    Gus'kova, A.K.; Burenin, P.I.; Barabanova, A.V.

    1987-01-01

    General organization points on medical aid and treatment of mass ionizing radiation injuries in population are presented. Characteristic of losses and structure of injuries induced by a nuclear explosion are given. Destructions in a town caused by a nuclear explosion and medical aid conditions for patients are analysed. Main information about structure of medical surveillance of civil defence and criteria of medical classification and evacuation of the injured are presented

  10. Comparative study of destructive and non-destructive methods in the activation analysis of rocks

    International Nuclear Information System (INIS)

    Vasconcellos, M.B.A.

    1978-01-01

    A comparative study between non-destructive thermal neutron activation analysis and activation analysis with radiochemical group separation is made Both methods are applied to the determination of trace elements minor and major elements in rocks. The treatment of the rocks, with special reference to the problems related to grinding and contamination by foreign elements is described. The choice of standards for multielement trace activation analysis is discussed. Two types of computer programs for the evalution of data obtained through Ge-li detector counting are used. All the phases of the destructive and non destructive analysis are described. In the destructive analysis, an adaptation of the group separation scheme developed by Morrison et al for the activation analysis of geological samples is made. The changes introduced make the radiochemical separation simpler and more rapid. Both destructive and non destructive methods are tested by means of the analysis of the United States Geological Survey standard rock AGV-1, which has been analysed by many authors. The same procedure is then applied to some alcaline rocks taken from the apatite mine of Jacupiranga, in the State of Sao Paulo, Brazil. The knowledge of the trace element concentration in these rocks is important for geochemical studies. A detailed study of the possible interferences encountered in the neutron activation analysis of these rocks is made, considering the interferences due to major activities, and to the proximity of the several gamma ray energies of the radioisotopes produced. Finally, the comparative study between the two methods is presented, using statistical tests for the quantitative evalution of results. (Author) [pt

  11. Simulation Experiments with the Model of Information-Psychological Influences on Mass Consciousness

    Directory of Open Access Journals (Sweden)

    Vladimir A. Minaev

    2017-06-01

    Full Text Available The article deals with the problem of researching the dynamics of information and psychological influences on mass consciousness, the possibility of their forecasting and management, which is one of the most important aspects of ensuring the information and psychological security of society and its citizens. To research the dynamics of information and psychological influence on mass consciousness, the article suggests a method of system-dynamic modeling, grounded and implemented on models of complex socio-economic phenomena by J. FoiTcster in the 1950s. The application of this method to solving the problems of information security is investigated by various foreign scientific teams. The method of system- dynamic modeling allows to display and investigate many factors that critically affect the processes of information and psychological influences on mass consciousness. The following factors arc taken into account in the model proposed by the authors of the model: the probability of «enthusiasm» of ideas embedded in the content of information and psychological influences, with interpersonal contact and as a result of the influence of the mass media, the massiveness and regularity of the mass media propagandizing the idea of information and psychological influences, the probability of forgetting the idea, embedded in the content of information and psychological influences, the probability of communication on the topic, embedded in the content of information and psychological influences, the probability of «enthusiasm» ideas of information and psychological influences in one communication contact, the average number of acquaintances with one message in the media, the probability of «enthusiasm» of a new idea from the content of information and psychological influences after reading the information in the media, the number of contacts a person, keen on ideas of information and psychological influences, per day. The mathematical apparatus on

  12. The information psychological periodization of the Chernoby'l NPP accident information in the mass media

    International Nuclear Information System (INIS)

    Bugrim, V.V.

    1992-01-01

    The activity of mass media reflecting the Chernobyl' accident in 1986-1991 has been surveilled. The information (radio, television, press conferences) given at this period was devided into seven classification periods. The analysis of the information and its assessment in each period was demonstrated. 6 refs

  13. Destructive distillation

    Energy Technology Data Exchange (ETDEWEB)

    Cosden, S; Cosden, J S

    1937-09-08

    A means and process are described for the destructive distillation of solid carbonaceous materials in which the process comprises charging the material, in a finely divided condition into a stream of hot combustion gases, and allows the hot gases to act pyrolytically on the organic compounds contained in the material, separating the volatile liberated constituents from residuary constituents. Hot reaction gases are generated by fuel ignition means in a generator and are immediately intermingled with comminuted carbonaceous material from a hopper, in a narrow conduit. The mixture of material and reaction fluid is then passed through an elongated confined path, which is exteriorly heated by the combustion chamber of the furnace, where the destructive distillation is effected. Volatile and solid constituents are separated in the chamber, and the volatile constituents are fractionated and condensed.

  14. Report on the bill project related to the struggle against proliferation of weapons of mass destruction and their delivery systems; Rapport fait au Nom de la Commission de la Defense Nationale et des Forces Armees sur le Projet de Loi (n. 1652) relatif a la lutte contre la proliferation des armes de destruction massive et de leurs vecteurs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    In a first part presenting the various forms of proliferations, the author first gives a quantitative overview of illegal activities concerning nuclear materials, and then discusses the existence and activities of proliferation networks, explaining how international trade liberalization creates a favourable context for proliferations of any kind, and describing how a typical network is organised. He also discusses the example of Iraq and the case of the network created by the Pakistani scientist Abdul Q. Khan. The risk created by the hypothetical relationship between terrorism and nuclear weapon of mass destruction is also questioned. Then, after having recalled the existing international texts and the present national legislation, the author comments the contribution on the bill project and outlines aspects which are not dealt with by this bill project: radiological devices and cybernetic attacks. Then he reports the comments made by the commission on the bill project articles which define interdictions, sanctions and sentences, or procedures against people or organisations involved in the financing or the use of weapons of mass destruction (biological and chemical). A table gives a comparison between the bill project text and the commission's propositions

  15. Consumption of Mass Communication--Construction of a Model on Information Consumption Behaviour.

    Science.gov (United States)

    Sepstrup, Preben

    A general conceptual model on the consumption of information is introduced. Information as the output of the mass media is treated as a product, and a model on the consumption of this product is developed by merging elements from consumer behavior theory and mass communication theory. Chapter I gives basic assumptions about the individual and the…

  16. Towards dynamic reference information models: Readiness for ICT mass customisation

    NARCIS (Netherlands)

    Verdouw, C.N.; Beulens, A.J.M.; Trienekens, J.H.; Verwaart, D.

    2010-01-01

    Current dynamic demand-driven networks make great demands on, in particular, the interoperability and agility of information systems. This paper investigates how reference information models can be used to meet these demands by enhancing ICT mass customisation. It was found that reference models for

  17. FOUNDATION AND DESCRIPTION OF INFORMATIONAL AND PSYCHOLOGICAL DESTRUCTIVE NATURE INFLUENCES DYNAMICS MODEL IN SOCIAL NETWORKS

    Directory of Open Access Journals (Sweden)

    V. A. Minaev

    2016-10-01

    Full Text Available The article provides a definition of information and psychological technologies and the main channels of information and psychological influences (IPI on social groups. A detailed analysis of the modeling human behavior experience, including the work of Soviet, Russian and foreign scientists is given. It is concluded that mathematical models of information-psychological dynamics influence on the current stage of psychological science development perspective only in relation to mass consciousness. Due to the complexity and poor knowledge of processes occurring in the human psyche and determined his personal peculiarities, the creation of adequate mathematical models of IPI in the individual consciousness is impossible, but for the expert prediction and assessment of the IPI dynamics on a particular member of a social group should use existing proven scientific tests and technique. It has been shown that a significant improvement in the predictability of mathematical models expected in the transition to a dynamic model in the state space. Given verbal and formal description of the model, leading to a form of non-linear differential equation describing the diffusion of innovations. The models take into account of the mass media influence on society, interpersonal information exchange, the effect of forgetting influence. It was emphasized that similar modified mathematical model has given good results in its application to the description of the electoral processes in Russia and spread of ideas of the "Arabian Spring" through social networks.

  18. Study of Polyolefines Waste Thermo-Destruction in Large Laboratory and in Industrial Installations

    Science.gov (United States)

    2014-12-15

    obtaining a product of performance characteristics close to those of commercially available diesel oil. Experimental Research of catalytic thermo-destruction...results were compared with parameters of diesel oil which properties were specified by specialized laboratory outside (Quality Control Laboratory Fuel...content of sulphur. The chromatographic analysis of gaseous and liquid products was conducted using Autosystem XL GC– Turbo Mass chromatograph

  19. Innovation in Non Destructive Testing

    NARCIS (Netherlands)

    Wassink, C.H.P.

    2012-01-01

    In many established companies the pace of innovation is low. The Non-Destructive Testing sector is an example of a sector where the pace of innovation is very slow. Non-Destructive Testing (NDT) refers to the set of non-invasive activities used to determine the condition of objects or installations

  20. Organization of measures on protection of population and territories against weapons of mass destruction: brief analysis of laboratory control and conditions of personnel protective means of respiratory organs in the Republic of Tajikistan

    International Nuclear Information System (INIS)

    Kamalov, D.D.; Makhmadov, T.F.; Stotskiy, D.F.

    2010-01-01

    Full text: Changing of character of acts of terrorism in the end of 20 and the beginning of 21 centuries specifies the increased interest of the terrorist organizations to the weapons of mass destruction. The most accessible are the biological and chemical weapons, as well as the self-made "dirty"explosive devices filled with a radioactive material. Application by terrorists of the nuclear weapon at the present is not actual. A nuclear ammunition is under the intensive control not only of the state-possessor of the nuclear weapon, but also all world community. Benefit of use of mass destruction weapons by the terrorist organizations is depended of accessibility of combat chemical or biological substances, easiness of their manufacture, a small amount of poisoning and biological substances necessary for use in the closed space, availability of influence on the big areas, psychological pressure upon the world community. The most known incidents related with use of chemical or biological substances were: - 1992 (chemical) - neo nazis attacked synagogue using cyanide, Germany - 1993 (chemical) - cyanide inside the bomb exploded in the World Trade Center, USA - 1994 (chemical) - use of sarin in Matsumoto, Japan led to the death of 8 and hospitalization of 200 people - 1995 (chemical) - again sarin used in Tokyo metro, 12 people died and 5 500 injured - 1995 (chemical) - FBI agents prevented the attack with the use of sarin of Disney land - 1995 (chemical) - attack in Japan with use of cyanide, phosgene and pepper gas - 1995 (biological) - a member of 'Aryan nation' was arrested for ordering a pestilence virus. - 1995 (radiological) - a terrorist organization of Chechnya republic placed a 14 kilo pack filled with a radioactive cesium-137 and explosives in a Moscow park - 1997 (chemical) - 2 attacks of the trading centers with a use of chlor bombs in Japan. The facts mentioned above put before the Republic of Tajikistan objectives of organization of actions for population

  1. Destruction of rocks by low velocity impact and its implications for accretion and fragmentation processes of planetesimals

    Science.gov (United States)

    Matsui, T.; Waza, T.

    1984-02-01

    Empirical relations linking the mass of the largest fragment, the kinetic energy released divided by the target mass, and the work done during impact are presented. It is found that the relation between the mass of the largest fragment, the mass of the target, and the work done during impact is not affected by the impact velocity. This work is seen as a useful means of describing phenomena associated with the impact destruction of rocks. On the basis of the empirical relations discussed here, a fragmentation model of the parent bodies of Eos and Koronis families is presented.

  2. Just-in-time learning is effective in helping first responders manage weapons of mass destruction events.

    Science.gov (United States)

    Motola, Ivette; Burns, William A; Brotons, Angel A; Withum, Kelly F; Rodriguez, Richard D; Hernandez, Salma; Rivera, Hector F; Issenberg, Saul Barry; Schulman, Carl I

    2015-10-01

    Chemical, biologic, radiologic, nuclear, and explosive (CBRNE) incidents require specialized training. The low frequency of these events leads to significant skill decay among first responders. To address skill decay and lack of experience with these high-impact events, educational modules were developed for mobile devices to provide just-in-time training to first responders en route to a CBRNE event. This study assessed the efficacy and usability of the mobile training. Ninety first responders were randomized to a control or an intervention group. All participants completed a pretest to measure knowledge of CBRNE topics. The intervention group then viewed personal protective equipment and weapons of mass destruction field management videos as an overview. Both groups were briefed on a disaster scenario (chemical nerve agent, radiologic, or explosives) requiring them to triage, assess, and manage a patient. Intervention group participants watched a mobile training video corresponding to the scenario. The control group did not receive prescenario video training. Observers rated participant performance in each scenario. After completing the scenarios, all participants answered a cognitive posttest. Those in the intervention group also answered a questionnaire on their impressions of the training. The intervention group outperformed the control group in the explosives and chemical nerve agent scenarios; the differences were statistically significant (explosives, mean of 26.32 for intervention and 22.85 for control, p just-in-time training improved first-responder knowledge of CBRNE events and is an effective tool in helping first responders manage simulated explosive and chemical agent scenarios. Therapeutic/care management study, level II.

  3. DESTRUCTIVE EDUCATIONAL PRACTICES AT UNIVERSITY

    Directory of Open Access Journals (Sweden)

    Андрей Владимирович Феоктистов

    2013-05-01

    Full Text Available The article is devoted to problems of origin and development of destructive educational practices at university. The authors focus on complex of interactions that disturb the existing in the academic environment norms and ethical principles. The most vivid evidence of destructive educational practice is the corruption issue. On the basis of the analyzed publications dealing with dynamics of corruption in the Russian higher education and the results of the survey by questionnaire, carried out at the technical university, the complex of recommendations has been prepared and suggested that is directed at minimization of destructive behavior at university.DOI: http://dx.doi.org/10.12731/2218-7405-2013-4-28

  4. Money Creation and Destruction

    OpenAIRE

    Faure, Salomon; Gersbach, Hans

    2017-01-01

    We study money creation and destruction in today’s monetary architecture and examine the impact of monetary policy and capital regulation in a general equilibrium setting. There are two types of money created and destructed: bank deposits, when banks grant loans to firms or to other banks and central bank money, when the central bank grants loans to private banks. We show that equilibria yield the first-best level of money creation and lending when prices are flexible, regardless of the monet...

  5. Characteristics of plutonium, curium and uranium in hulls of FUGEN MOX spent fuel by destructive analysis

    International Nuclear Information System (INIS)

    Iijima, Shizuka; Goto, Yuichi; Samoto, Hirotaka; Shichi, Ryo; Shimizu, Takenori

    2011-01-01

    We have been developing a non-destructive assay system called hulls monitor for nuclear fuel materials retained in hulls at the Tokai Reprocessing Plant (TRP). The hulls monitor is based on a passive neutron measurement method, so its applicability should be evaluated by a destructive analysis of hulls that are recovered from the reprocessing process. In this study, hulls came from the Advanced Thermal Reactor (ATR) FUGEN were taken from the dissolution process of TRP and destructively analyzed. Two kinds of hulls from ATR-MOX spent fuel assemblies and from ATR-UO 2 spent fuel assemblies were taken and soaked with nitric acid then fused with ammonium hydrogen sulfate, followed by Pu, 244 Cm, U mass determination by alpha spectrometry and ICP-AES. The characteristics of hulls came from MOX spent fuel assemblies were revealed by comparison of ATR-MOX spent fuel with ATR-UO 2 spent fuel. (author)

  6. Energy consumption, destruction of exergy and boil off during the process of liquefaction, transport and regasification of liquefied natural gas

    Energy Technology Data Exchange (ETDEWEB)

    Stradioto, Diogo Angelo; Schneider, Paulo Smith [Dept. of Mechanical Engineering. Universidade Federal do Rio Grande do Sul, Porto Alegre (Brazil)], e-mail: pss@mecanica.ufrgs.br

    2010-07-01

    A supply chain of Liquefied Natural Gas (LNG) is composed by several processes like extraction, purification, liquefaction, storage, transport, regasification and distribution. In all these stages, processes need of energy. The main objective of this work is to quantify the energy consumption, mass loss and exergy destruction occurred throughout the chain. Results show that the process of liquefaction is the largest consumer of energy. Storage and transport by ship are responsible for the bigger mass losses and regasification is the process of larger destruction of exergy. A case study is performed considering a stream of pure methane at the input of a liquefaction plant, and evaluates energy along the chain, ending up at the distribution of NG after its regasification. (author)

  7. Characterization of Old Nuclear Waste Packages Coupling Photon Activation Analysis and Complementary Non-Destructive Techniques

    International Nuclear Information System (INIS)

    Carrel, Frederick; Coulon, Romain; Laine, Frederic; Normand, Stephane; Sari, Adrien; Charbonnier, Bruno; Salmon, Corine

    2013-06-01

    Radiological characterization of nuclear waste packages is an industrial issue in order to select the best mode of storage. The characterization becomes crucial particularly for waste packages produced at the beginning of the French nuclear industry. For the latter, available information is often incomplete and some key parameters are sometimes missing (content of the package, alpha-activity, fissile mass...) In this case, the use of non-destructive methods, both passive and active, is an appropriate solution to characterize nuclear waste packages and to obtain all the information of interest. In this article, we present the results of a complete characterization carried out on the TE 1060 block, which is a nuclear waste package produced during the 1960's in Saclay. This characterization is part of the DEMSAC (Dismantling of Saclay's facilities) project (ICPE part). It has been carried out in the SAPHIR facility, located in Saclay and housing a linear electron accelerator. This work enables to show the great interest of active methods (photon activation analysis and high-energy imaging) as soon as passive techniques encounter severe limitations. (authors)

  8. Dam safety review using non-destructive methods for reinforced concrete structure

    Energy Technology Data Exchange (ETDEWEB)

    Philibert, Alain; Saint-Pierre, Francois; Turcotte, Bernard [Le Groupe S.M. International Inc., Sherbrooke, (Canada)

    2010-07-01

    Dams built at the beginning of the twentieth century include concrete structures that were put in under rehabilitation works. In some cases, the details of the structures are not well documented. In other cases, concrete damage can be hidden under new layers of undamaged material. This requires that the dam safety review in a real investigation gather the information necessary for carrying out the hydraulic and stability studies required by the Dam Safety Act. This paper presented the process of dam safety review using non-destructive methods for reinforced concrete structures. Two reinforced concrete dams built in the 1900's, the Eustic dam on the Coaticook River and the Frontenac dam on the Magog River near Sherbrooke, were evaluated by S.M. International using non-destructive methods such as sonic and ground penetrating radar methods. The studies allowed mapping of concrete damage and provided geometric information on some non visible structure elements that were part of previous reinforcement operations.

  9. Non-destructive testing and radiation in industry

    International Nuclear Information System (INIS)

    Woodford, C; Ashby, P.

    2001-01-01

    Non-destructive testing (NDT) is a little known discipline which uses non-invasive and passive techniques to investigate the condition of materials and structures. Some of these techniques employ the use of radioisotopes. The penetrating radiations produced by these materials are applied in various ways to obtain the required information. This presentation is an overview of the application of radioisotopes within the scope of NDT. Notwithstanding the well established use of traditional materials, new forms of radioisotopes are being developed which will extend their capabilities

  10. Collision-induced destructive quantum interference

    International Nuclear Information System (INIS)

    Yang Xihua; Sun Zhenrong; Zhang Shi'an; Ding Liang'en; Wang Zugeng

    2005-01-01

    We conduct theoretical studies on the collision-induced destructive quantum interference of two-colour two-photon transitions in an open rhomb-type five-level system with a widely separated doublet by the density matrix approach. The effects of the collision-induced decay rates, the ratio of the transition dipole moments and the energy separation of the doublet on the interference are analysed. It is shown that a narrow dip appears in the excitation spectrum due to the collision-induced destructive interference, and that the narrow interference dip still exists even when the collision broadening is comparable to the energy separation of the doublet. The physical origin of the collision-induced destructive quantum interference is analysed in the dressed-atom picture

  11. Collisional destruction of fast hydrogen Rydberg atoms

    International Nuclear Information System (INIS)

    King, M.R.

    1984-01-01

    A new modulated electric field technique was developed to study Rydberg atom destruction processes in a fast beam. The process of destruction of a band of Rydberg atom destruction of a band of Rydberg atoms through the combined processes of ionization, excitation, and deexcitation was studied for collisions with gas targets. Rydberg atoms of hydrogen were formed by electron capture, and detected by field ionization. The modulated field technique described proved to be an effective technique for producing a large signal for accurate cross section measurements. The independent particle model for Rydberg atom destruction processes was found to hold well for collisions with molecular nitrogen, argon, and carbon dioxide. The resonances in the cross sections for the free electron scattering with these targets were found to also occur in Rydberg destruction. Suggestions for future investigations of Rydberg atom collision processes in the fast beam regime are given

  12. Destructive distillation

    Energy Technology Data Exchange (ETDEWEB)

    Allison, C A

    1906-05-22

    The invention relates to an apparatus in which the destructive distillation or coking of coal, peat, shale, etc., is carried out by means of a current of hot gases at a temperature of 700--800/sup 0/F., as described in Specification No. 11,925, A.D. 1906.

  13. Non-destructive controls

    International Nuclear Information System (INIS)

    Nouvet, A.

    1978-01-01

    The non-destructive controls permit, while respecting their integrity, the direct and individual examination of parts or complete objects as they are manufactured, as well as to follow the evolution of their eventual defects while in operation. The choice of control methods depends on the manufacturing process and shapes of parts, on the physical properties of their components as well as the nature, position and size of the defects which are likely to be detected. Whether it is a question of controls by means of ionizing radiation, flux of neutrons, ultrasons, acoustic source, sweating, magnetoscopy. Foucault currents, thermography, detection of leaks or non-destructive metallography, each has a limited field of application such that they are less competitive than complementary [fr

  14. Culture of Scientific Information in Mass Media on the Internet

    Directory of Open Access Journals (Sweden)

    Arwa 'Isa al-Yasiry

    2006-12-01

    Full Text Available This research aims at evaluating the quality of scientific information culture that introduce it the Arabic mass media in the internet and how it covering the reality of Arabic scientific information by using analysis content method for these websites then we most be know how these websites treating with information culture considering information systems has input, output and mutual relations between the elements of this system that include the following three components: 1- External relations that connecting between the culture and the reality. 2- Internal elements for this system. 3- Infrastructures for this system that represented in the cultural policy, informational , information resources and human resources

  15. The forms of destructive behavior in the workplace

    Directory of Open Access Journals (Sweden)

    D A Narozhnaia

    2015-12-01

    Full Text Available Personnel have become a key resource of organizations in the contemporary society for the way personnel fulfills its work functions can provide important advantages in the competitive market. However, despite the fact that organizations’ management pays great attention to the development of the constructive forms of work behavior, various forms of destructive behavior in the workplace are quite widespread nowadays. The author uses the concept “destructive labor behavior” to denote such observable actions of employees that hinder achieving organizations’ aims and entail negative consequences. The article analyzes relationships between concepts “destructive labor behavior”, “social behavior” and “organizational behavior”; identifies the most common types of destructive labor behavior, such as absenteeism, theft, sabotage, lowered labor activity, and their key features; considers their negative consequences, such as decreased production, decline in the quality of products or services, conflicts in the team, tensions between workers and employers; analyzes different classifications of the destructive forms of labor behavior. The author concludes that we need a general classification of the destructive forms of labor behavior based on their grouping on three grounds: the essence of the negative consequences of the destructive behavior; the violated legal norms; the causes of the destructive behavior. Moreover, the article identifies three groups of organizational factors that can generate destructive forms of labor behavior - production factors (content, organization and conditions of work, social factors (group relations and psychological (personal characteristics of employees - and provides recommendations to reduce their impact on the organization.

  16. VERBALIZATION OF INFORMATIONAL MODEL «CHINA’S DOMINATION» IN THE U.S. MASS-MEDIA

    Directory of Open Access Journals (Sweden)

    Olga Nikolayevna Sorokina

    2013-11-01

    Full Text Available The article is devoted to the research of informational model verbalization titled «China’s Domination», which is formed by the USA mass media. The applicability of this theme is proved by importance of national cognitive activity research (informational model construction through the reference to semiotically ordered set of texts. This study is timely as the mechanisms of informational models representation in mass media are poorly known. Thus, the author offers the term «informational model», considering it as an organized in a special way mass media language which foregrounds mental representations set by authors. The primary goal of this study is a research of informational model foregrounding, viz. informational model verbalization titled «China’s Domination» represented by the U.S. mass-media.  In order to solve this problem the author uses a number of research methods which supplement each other: content-analysis, definitional analysis, method of the contextual analysis, discursive and cognitive analysis of the U.S. mass media, interpretative analysis. The empiric base of this research is the content analysis of five national printing editions of the USA: «The New York Times», «The Washington Post», «The Wall Street Journal», «Time», «Newsweek».Detection of leading psycholinguistic means which form the information model «China’s Domination» in mass-media of the USA becomes the result of the conducted research. Amongst the leading linguistic means the author point out such as:  communicative strategy (polarization, defamation, reliability, allegory, and also the marked lexical units (synonyms, epithets, emotive lexicon, metaphors.DOI: http://dx.doi.org/10.12731/2218-7405-2013-7-58

  17. 7 CFR 160.9 - Destructively distilled wood turpentine.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Destructively distilled wood turpentine. 160.9 Section... REGULATIONS AND STANDARDS FOR NAVAL STORES General § 160.9 Destructively distilled wood turpentine. The designation “destructively distilled wood turpentine” shall refer to the kind of spirits of turpentine...

  18. Procedure of Destructive Chemical Recovery of Precious Metals in Nitric Acid Production

    Directory of Open Access Journals (Sweden)

    Ljubičić, M.

    2012-07-01

    Full Text Available The heart of the nitric acid production process is the chemical reactor containing a platinum-based catalyst pack and an associated catchment system, which allows the ammonia oxidation reaction to take place efficiently. Under the severe operating conditions imposed by the high-pressure ammonia oxidation process, the catalyst gauzes experience progressive deterioration, as shown by the restricted surface of the catalyst wires, the loss of catalytic activity and the loss of catalytic materials. The higher the pressure of gaseous ammonia oxidation, the greater the loss of platinum group metals from the surface of the applied selective heterogeneous catalysts. Total losses for one batch over the whole period of using selective heterogeneous catalysts may account in the range from 20 to 40 % of the total installed quantity of precious metals. An important part of the platinum removed from the platinum-rhodium alloy wires can be recovered at the outlet of the reactor by means of palladium catchment gauzes. However, this catchment process, which is based on the great ability of palladium to alloy with platinum, is not 100 % effective and a fraction of the platinum and practically all of the rhodium lost by the catalyst wires, evades the catchment package and is then deposited in other parts of the plant, especially heat exchangers. From the above mentioned operating equipment, the retained mass of precious metals can be recovered by the technical procedure of non-destructive and destructive chemical solid-liquid extraction.Shown is the technical procedure of destructive chemical recovery of preheater and boiler for preheating and production of steam by applying sulfuric acid (w = 20 % and subsequent procedure of raffination of derived sludge, to the final recovery of precious metals. The technical procedure of destructive chemical recovery of precious metals from preheater and boiler for preheating and production of steam in nitric acid production is

  19. Ozone mass transfer and kinetics experiments

    International Nuclear Information System (INIS)

    Bollyky, L.J.; Beary, M.M.

    1981-12-01

    Experiments were conducted at the Hanford Site to determine the most efficient pH and temperature levels for the destruction of complexants in Hanford high-level defense waste. These complexants enhance migration of radionuclides in the soil and inhibit the growth of crystals in the evaporator-crystallizer. Ozone mass transfer and kinetics tests have been outlined for the determination of critical mass transfer and kinetics parameters of the ozone-complexant reaction

  20. Facing towards or Turning away from Destructive Narcissism

    Science.gov (United States)

    Flynn, Denis; Skogstad, Helga

    2006-01-01

    This paper presents a detailed theoretical discussion of destructive narcissism in relation to Freud and Rosenfeld and later theorists. In destructive narcissism, the destructiveness is itself idealised and overrides "the vital functions which serve the purpose of self-preservation" (Freud, S., 1914, "On narcissism" S.E. 14: 87)--a feature which…

  1. Screening of Maritime Containers to Intercept Weapons of Mass Destruction

    International Nuclear Information System (INIS)

    Manatt, D R; Sleaford, B; Schaffer, T; Accatino, M R; Slaughter, D; Mauger, J; Newmark, R; Prussin, S; Luke, J; Frank, M; Bernstein, A; Alford, O; Mattesich, G; Stengel, J; Hall, J; Descalle, M A; Wolford, J; Hall, H; Loshak, A; Sale, K; Trombino, D; Dougan, A D; Pohl, B; Dietrich, D; Weirup, D; Walling, R; Rowland, M; Johnson, D; Hagmann, C; Hankins, D

    2004-01-01

    The goal of our research was to address the problem of detection of weapons of mass destruction (WMD) materials within containers in common use on commercial cargo trafficking. LLNL has created an experimental test bed for researching potential solutions using (among other techniques) active interrogation with neutrons. Experiments and computational modeling were used to determine the effectiveness of the technique. Chemical weapons materials and high explosives can be detected using neutron activation and simple geometries with little or no intervening material. However in a loaded container there will be nuisance alarms from conflicting signatures resulting from the presence of material between the target and the detector (and the interrogation source). Identifying some elements may require long counting times because of the increased background. We performed some simple signature measurements and simulations of gamma-ray spectra from several chemical simulants. We identified areas where the nuclear data was inadequate to perform detailed computations. We concentrated on the detection of SNM in cargo containers, which will be emphasized here. The goal of the work reported here is to develop a concept for an active neutron interrogation system that can detect small targets of SNM contraband in cargo containers, roughly 5 kg HEU or 1 kg Pu, even when well shielded by a thick cargo. It is essential that the concept be reliable and have low false-positive and false-negative error rates. It also must be rapid to avoid interruption of commerce, completing the analysis in minutes. A potentially viable concept for cargo interrogation has been developed and its components have been evaluated experimentally. A new radiation signature unique to SNM has been identified that utilizes high-energy, fission-product gamma rays. That signature due to γ-radiation in the range 3-6 MeV is distinct from normal background radioactivity that does not extend above 2.6 MeV. It's short

  2. Can non-destructive inspection be reliable

    International Nuclear Information System (INIS)

    Silk, M.G.; Stoneham, A.M.; Temple, J.A.G.

    1988-01-01

    The paper on inspection is based on the book ''The reliability of non-destructive inspection: assessing the assessment of structures under stress'' by the present authors (published by Adam Hilger 1987). Emphasis is placed on the reliability of inspection and whether cracks in welds or flaws in components can be detected. The need for non-destructive testing and the historical attitudes to non-destructive testing are outlined, along with the case of failure. Factors influencing reliable inspection are discussed, and defect detection trials involving round robin tests are described. The development of reliable inspection techniques and the costs of reliability and unreliability are also examined. (U.K.)

  3. Plasma destruction of North Carolina's hazardous waste based of hazardous waste generated between the years of 1989 and 1992

    International Nuclear Information System (INIS)

    Williams, D.L.

    1994-01-01

    The purpose of this research is to analyze the applicability of the plasma waste destruction technology to North Carolina hazardous waste streams. This study outlines the current regulations, existing technologies, and innovative technologies being considered as hazardous waste treatment alternatives. From this foundation, the study proceeds to identify the superiority of the plasma waste destruction technology. Specific areas of discussion include: temperature capabilities, waste residence time requirements, destruction removal efficiencies, operational efficiencies, economic issues, safety, and maintenance. This study finds the plasma destruction technology to be fully effective and superior to conventional facilities. The technology completely destroys hydrocarbons and can reduce the volume of many other hazardous wastes on the order of one part per million. The required residence time of waste in a plasma facility for effective destruction is a fraction of a second, while the rotary kiln incinerator maintains an average residence time of approximately 5 seconds. Also mass and heat balance calculations are performed to quantify the effectiveness and efficiency of this technology. It is found that one day's average amount of hazardous waste generated in the state of North Carolina can be destroyed in approximately thirty seconds using a standard one megawatt power source. Yet, before this technology is adopted as North Carolina's primary hazardous waste destruction technology, further study is needed so that all issues considered in this research can be conducted in great detail

  4. Destruction as a Step in Heidegger's Phenomenology

    Directory of Open Access Journals (Sweden)

    M.J Safian

    2014-08-01

    Full Text Available One of the most controversial issues in Heidegger’s philosophy is his claim that western philosophy tradition has overlooked the issue of Being. Heidegger’s attempt is to reveal the origins of this negligence by means of destruction. However, it seems that through such claim Heidegger aims to destroy and disvalue this tradition. In addition to defining and explaining destruction, our purpose in this article is to show that Heidegger’s goal is not to destroy the tradition of philosophy but the term destruction refers to a process which is a step in Heidegger’s phenomenology by means of which one can conceive and perceive Being better because only through such destruction ontology can fully assure itself in a phenomenological way of the genuine character of its concepts. The necessity of doing destruction in Heidegger’s thought has also been discussed and his persistence on it has been shown in two of his works, one belongs to early and another to later Heidegger.

  5. Burnup determination of mass spectrometry for nuclear fuels

    International Nuclear Information System (INIS)

    Zhang Chunhua.

    1987-01-01

    The various methods currently being used in burnup determination of nuclear fuels are studied and reviewed. The mass spectrometry method of destructive testing is discussed emphatically. The burnup determination of mass spectrometry includes heavy isotopic abundance ratio method and isotope dilution mass spectrometry used as burnup indicator for the fission products. The former is applied to high burnup level, but the later to various burnup level. According to experiences, some problems which should be noticed in burnup determination of mass spectrometry are presented

  6. The Destructive/Non-Destructive Identification of Enameled Pottery, Glass Artifacts and Associated Pigments—A Brief Overview

    Directory of Open Access Journals (Sweden)

    Philippe Colomban

    2013-07-01

    Full Text Available The birth of Chemistry can be found in two main practices: (i the Arts du feu (ceramic and glass, metallurgy, i.e., inorganic and solid state chemistry and (ii the preparation of remedies, alcohols and perfumes, dyes, i.e., organic and liquid state chemistry. After a brief survey of the history of (glazed pottery and (enameled glass artifacts, the development of destructive and non-destructive analytical techniques during the last few centuries is reviewed. Emphasis is put on mobile non-destructive Raman microspectroscopy of pigments and their glass/glaze host matrices for chronological/technological expertise. The techniques of white opacification, blue, yellow, green, red, and black coloring, are used as examples to point out the interest of pigments as chronological/technological markers.

  7. Expandable Polymer Enabled Wirelessly Destructible High-Performance Solid State Electronics

    KAUST Repository

    Gumus, Abdurrahman; Alam, Arsalan; Hussain, Aftab M.; Mishra, Kush; Wicaksono, Irmandy; Sevilla, Galo T.; Shaikh, Sohail F.; Diaz, Marlon; Velling, Seneca; Ghoneim, Mohamed T.; Ahmed, Sally; Hussain, Muhammad Mustafa

    2017-01-01

    In today's digital age, the increasing dependence on information also makes us vulnerable to potential invasion of privacy and cyber security. Consider a scenario in which a hard drive is stolen, lost, or misplaced, which contains secured and valuable information. In such a case, it is important to have the ability to remotely destroy the sensitive part of the device (e.g., memory or processor) if it is not possible to regain it. Many emerging materials and even some traditional materials like silicon, aluminum, zinc oxide, tungsten, and magnesium, which are often used for logic processor and memory, show promise to be gradually dissolved upon exposure of various liquid medium. However, often these wet processes are too slow, fully destructive, and require assistance from the liquid materials and their suitable availability at the time of need. This study shows Joule heating effect induced thermal expansion and stress gradient between thermally expandable advanced polymeric material and flexible bulk monocrystalline silicon (100) to destroy high-performance solid state electronics as needed and under 10 s. This study also shows different stimuli-assisted smartphone-operated remote destructions of such complementary metal oxide semiconductor electronics.

  8. Expandable Polymer Enabled Wirelessly Destructible High-Performance Solid State Electronics

    KAUST Repository

    Gumus, Abdurrahman

    2017-03-29

    In today\\'s digital age, the increasing dependence on information also makes us vulnerable to potential invasion of privacy and cyber security. Consider a scenario in which a hard drive is stolen, lost, or misplaced, which contains secured and valuable information. In such a case, it is important to have the ability to remotely destroy the sensitive part of the device (e.g., memory or processor) if it is not possible to regain it. Many emerging materials and even some traditional materials like silicon, aluminum, zinc oxide, tungsten, and magnesium, which are often used for logic processor and memory, show promise to be gradually dissolved upon exposure of various liquid medium. However, often these wet processes are too slow, fully destructive, and require assistance from the liquid materials and their suitable availability at the time of need. This study shows Joule heating effect induced thermal expansion and stress gradient between thermally expandable advanced polymeric material and flexible bulk monocrystalline silicon (100) to destroy high-performance solid state electronics as needed and under 10 s. This study also shows different stimuli-assisted smartphone-operated remote destructions of such complementary metal oxide semiconductor electronics.

  9. Destruction and cross-linking of dextran during γ-radiolysis of its aqueous solutions. Effect of hydrogen ions

    International Nuclear Information System (INIS)

    Kovalev, G.V.; Sinitsin, A.P.; Bugaenko, L.T.

    2000-01-01

    Conditions of primary proceeding either cross-linking process or destruction one during γ-radiolysis in the range of 0-0.32 MGy doses of acid aqueous solutions of dextran macromolecules (P W =930) are determined by the methods of viscosimetry and gel-chromatography. It is shown that initial acidification of dextran solutions results in increasing of the role of cross-linking of macromolecules in the process of formation of molecular-mass distribution of the polymer but continued acidification promotes destruction. It is established that the former is caused by transformation of hydrated electron in hydrogen atoms and the second - by catalytic effect of protons on macromolecular destruction of primary macroradicals being accompanied by breakage of glucoside bonds. It is shown that so far as dextran concentration increase transmission of radical center can to occur on macroradical-macromolecule reaction. As a result macroradical able to monomolecular decomposition transforms in macroradical not able to this transformation [ru

  10. The Roles of Mass Media in Disseminating Agricultural Information ...

    African Journals Online (AJOL)

    The study further shows that access to mass media on agricultural information is through radio and television, and most of them indicated that the media sources are conventional, accessible and preferred to listen to the agricultural progammes in the night time (8pm -11.59pm).The respondents identified purchasing and ...

  11. Mass spectrometry in identification of ecotoxicants including chemical and biological warfare agents

    International Nuclear Information System (INIS)

    Lebedev, Albert T.

    2005-01-01

    Mass spectrometry is a unique tool to detect and identify trace levels of organic and bioorganic compounds as well as microorganisms in the environment. The range of potential chemical warfare (CW) and biological warfare (BW) agents is very broad. An important advantage of mass spectrometry over other techniques involves potential for full spectrum detection of chemical and biological agents including mid-spectrum materials (i.e. bioactive peptides, toxins, etc.) for which biological approaches are inadequate. Being very fast (seconds and minutes), extremely sensitive (zeptomoles 10 -21 ), and informative (detailed qualitative and quantitative composition of mixtures containing hundreds of chemicals), mass spectrometry is a principal analytical tool at the sites of destruction of CW. Due to its unique features, mass spectrometry is applied not only for the detection of CW agents, but for the analysis of products of metabolism and degradation of these agents in organisms or environment as well. The present paper deals with some examples of successful application of mass spectrometry for the analyses of ecotoxicants, chemical warfare agents, explosives, and microorganisms including biology warfare agents

  12. Models on reliability of non-destructive testing

    International Nuclear Information System (INIS)

    Simola, K.; Pulkkinen, U.

    1998-01-01

    The reliability of ultrasonic inspections has been studied in e.g. international PISC (Programme for the Inspection of Steel Components) exercises. These exercises have produced a large amount of information on the effect of various factors on the reliability of inspections. The information obtained from reliability experiments are used to model the dependency of flaw detection probability on various factors and to evaluate the performance of inspection equipment, including the sizing accuracy. The information from experiments is utilised in a most effective way when mathematical models are applied. Here, some statistical models for reliability of non-destructive tests are introduced. In order to demonstrate the use of inspection reliability models, they have been applied to the inspection results of intergranular stress corrosion cracking (IGSCC) type flaws in PISC III exercise (PISC 1995). The models are applied to both flaw detection frequency data of all inspection teams and to flaw sizing data of one participating team. (author)

  13. Non-destructive testing at Chalk River

    International Nuclear Information System (INIS)

    Hilborn, J.W.

    1976-01-01

    In 1969 CRNL recognized the need for a strong group skilled in non-destructive test procedures. Within two years a new branch called Quality Control Branch was staffed and working. This branch engages in all aspects of non-destructive testing including development of new techniques, new applications of known technology, and special problems in support of operating reactors. (author)

  14. OLDAPS: Obsidian Least Destructive Analysis Provenancing System

    Energy Technology Data Exchange (ETDEWEB)

    Eder, F.M.; Sterba, J.H.; Bichler, M. [Atominstitut, Vienna University of Technology, Vienna (Austria); Neelmeijer, C.; Merchel, S. [Helmholtz-Zentrum Dresden-Rossendorf (HZDR), Dresden (Germany); Pearce, N.J.G. [Institute of Geography and Earth Sciences, Aberystwyth University, Wales (United Kingdom)

    2013-07-01

    Full text: The natural volcanic glass obsidian is one of the classical objects of archaeometric analyses. Reliable provenancing by means of the highly specific chemical composition, the 'chemical fingerprint', can provide information about trading routes, extension of territory, long-distance contacts and the mobility of prehistoric people. Since the pioneer work of Cann and Renfrew in 1964 [1] various analytical methods have been employed on obsidian samples in order to locate their provenance. The existing data already offers important knowledge about long-distance interactions between prehistoric human populations. However, most applied techniques just show a small part of the element spectrum. Latest studies showed that published results gained by different analytical methods are not consistent due to systematic errors [2-3]. Therefore, the application of three complementary analytical techniques on the same set of raw material samples allows both a better characterization of obsidian sources and a comparison and validation of analytical results. The aim of this multi-methodical approach is to apply in particular: 1) lon Beam Analysis (IBA) comprising of Particle Induced X-ray Emission (PIXE) and Particle Induced Gamma-ray Emission (PIGE), 2) Instrumental Neutron Activation Analysis (INAA), 3) Laser Ablation-lnductively Coupled Plasma-Mass Spectrometry (LA-ICP-MS), to detect a maximum element spectrum and to compare element concentrations determined with at least two analytical techniques. This approach should check the accuracy and reliability of analytical results and should show a maximum of compositional differences between European obsidian sources to reveal the most characteristic 'chemical fingerprint' composed of more than 40 elements. These investigations are part of a new multi-methodical analytical database called the 'Obsidian Least Destructive Analysis Provenancing System' (OLDAPS). This novel scientific approach for

  15. Treatment of statin compounds by advanced oxidation processes: Kinetic considerations and destruction mechanisms

    Science.gov (United States)

    Razavi, Behnaz; Song, Weihua; Santoke, Hanoz; Cooper, William J.

    2011-03-01

    This study examined the use of advanced oxidation/reduction processes (AO/RPs) for the destruction of cholesterol lowering statin pharmaceuticals. AO/RPs which utilize the oxidizing hydroxyl radical ( rad OH) and reducing aqueous electron (e -aq), to degrade chemical contaminants are alternatives to traditional water treatment methods, and are alternatives as water reuse becomes more generally implemented. Four major statin pharmaceuticals, fluvastatin, lovastatin, pravastatin and simvastatin, were studied, and the absolute bimolecular reaction rate constants with rad OH determined, (6.96±0.16)×10 9, (2.92±0.06)×10 9, (4.16±0.13)×10 9, and (3.13±0.15)×10 9 M -1 s -1, and for e -aq (2.31±0.06)×10 9, (0.45±0.01)×10 9, (1.26±0.01)×10 9, and (0.69±0.02)×10 9 M -1 s -1, respectively. To provide additional information on the radicals formed upon oxidation, transient spectra were measured and the overall reaction efficiency determined. Radical-based destruction mechanisms for destruction of the statins are proposed based on the LC-MS determination of the stable reaction by-products formed using 137Cs γ-irradiation of statin solutions. Knowing the reaction rates, reaction efficiencies and destruction mechanisms of these compounds is essential for the consideration of the use of advanced oxidation/reduction processes for the destruction of statins in aqueous systems.

  16. Treatment of statin compounds by advanced oxidation processes: Kinetic considerations and destruction mechanisms

    International Nuclear Information System (INIS)

    Razavi, Behnaz; Song Weihua; Santoke, Hanoz; Cooper, William J.

    2011-01-01

    This study examined the use of advanced oxidation/reduction processes (AO/RPs) for the destruction of cholesterol lowering statin pharmaceuticals. AO/RPs which utilize the oxidizing hydroxyl radical ( · OH) and reducing aqueous electron (e - aq ), to degrade chemical contaminants are alternatives to traditional water treatment methods, and are alternatives as water reuse becomes more generally implemented. Four major statin pharmaceuticals, fluvastatin, lovastatin, pravastatin and simvastatin, were studied, and the absolute bimolecular reaction rate constants with · OH determined, (6.96±0.16)x10 9 , (2.92±0.06)x10 9 , (4.16±0.13)x10 9 , and (3.13±0.15)x10 9 M -1 s -1 , and for e - aq (2.31±0.06)x10 9 , (0.45±0.01)x10 9 , (1.26±0.01)x10 9 , and (0.69±0.02)x10 9 M -1 s -1 , respectively. To provide additional information on the radicals formed upon oxidation, transient spectra were measured and the overall reaction efficiency determined. Radical-based destruction mechanisms for destruction of the statins are proposed based on the LC-MS determination of the stable reaction by-products formed using 137 Cs γ-irradiation of statin solutions. Knowing the reaction rates, reaction efficiencies and destruction mechanisms of these compounds is essential for the consideration of the use of advanced oxidation/reduction processes for the destruction of statins in aqueous systems.

  17. Developments in non-destructive beam diagnostics

    International Nuclear Information System (INIS)

    Fraser, J.S.

    1981-01-01

    With the large average beam currents being achieved in accelerators and storage rings, there is an increasing need for non-destructive beam diagnostic devices. For continuous beams, position monitors of the capacitive pick-up type are replaced by resonant devices that respond to the transverse displacement of the beam centroid. Bunch length monitors of the SLAC type using resonant cavities operating in the TM 010 mode can be used for continuous beams. The more detailed information derivable from beam profile scanners requires development of improved non-destructive devices. Profile monitors which scan the visible light produced by high current beams may be more reliable than ones using the residual ionization if the light intensity from gas molecules following nonionizing collisions with beam particles gives a measure of the beam current density independent of the local electron density. The intense Balmer series lines from neutral hydrogen beams have been used successfully to measure beam profiles. At CRNL and at LASL, beam light profile monitors are being developed for high average current accelerators. Three or more projections will be recorded to allow tomographic reconstruction of the two-dimensional beam current density. Light detection is either by intensified Reticons or ISIT vidicons. The use of three or more beam light monitors on a beam transport line will also permit estimates of the transverse emittance to be made through the reconstruction technique

  18. Empirical analysis of the types of destructiveness of law enforcement officers

    Directory of Open Access Journals (Sweden)

    Zlokazov K.V.

    2014-12-01

    Full Text Available The variety of existing scientific concepts of the problem of personality destructiveness is shown. The character of such general conclusions does not facilitate the cognition and prediction of destructive phenomena. The author proves the necessity to develop psychological theory of destructiveness which methodologically unites well-known but separate phenomena of psychological life of an individual. The fundamental propositions of this theory are argued: destructiveness is an active behaviour; it is aimed at perceived goal and formed on the basis of need perceived by an individual. The following features of destructiveness are distinguished: individual typological, regulatory, value characteristics of personality; peculiarities of person’s attitude to significant aspects of life – to the self, society and professional activity. The author proposes his own method of destructiveness diagnostics aimed at describing destructive and constructive components of social and professional activity of a person. Diagnostics indicators are the following: typological preconditions of destructiveness; features of regulation of activity and relations; value characteristics of individuals related to destructiveness. Indicators, describing the level of personal disadaptation, are provided. Personality destructiveness indicators of 211 law enforcement officers (93 % – males, mean age – 34 were analyzed, which allowed to group and describe psychological characteristics of 4 types of destructiveness. They are: socially alienated – 31 % of respondents, socially destructive – 29 %, asocially destructive – 23 %, asocially alienated – 17 %. This typology allows to generalize psychological preconditions of destructive and constructive behaviour of law enforcement officers. The author proposes further analyzing the provisions of conception of personality destructiveness.

  19. 27 CFR 25.223 - Destruction of beer off brewery premises.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Destruction of beer off... TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Voluntary Destruction § 25.223 Destruction of beer off brewery premises. (a) Destruction without supervision. A brewer may destroy beer without...

  20. Indirect self-destructiveness in individuals with schizophrenia

    Directory of Open Access Journals (Sweden)

    Konstantinos Tsirigotis

    2017-06-01

    Full Text Available Objective: To explore the indirect self-destructiveness syndrome in patients with schizophrenia. Methods: Two hundred individuals with paranoid schizophrenia (117 men and 83 women, mean age 37.15 years, all in remission, were examined using the Polish version of the Chronic Self-Destructiveness Scale. Two hundred well-matched healthy individuals served as a control group. Results: The intensity of indirect self-destructiveness was greater in the schizophrenia group than in controls. The intensity of each manifestation was as follows (in decreasing order: helplessness and passiveness in the face of difficulties (A5, personal and social neglects (A3, lack of planfulness (A4, poor health maintenance (A2, transgression and risk (A1. Conclusion: Patients with schizophrenia displayed more behaviors that were indirectly self-destructive than healthy controls; they scored better than healthy controls only on caring for their own health. The patients showed the lowest intensity of behaviors connected with the active form of indirect self-destructiveness, and the highest intensity of behaviors connected with the passive form. These findings may enable delivery of more effective forms of pharmacological and psychosocial help to patients with schizophrenia.

  1. Chemical or Biological Terrorist Attacks: An Analysis of the Preparedness of Hospitals for Managing Victims Affected by Chemical or Biological Weapons of Mass Destruction

    Science.gov (United States)

    Bennett, Russell L.

    2006-01-01

    The possibility of a terrorist attack employing the use of chemical or biological weapons of mass destruction (WMD) on American soil is no longer an empty threat, it has become a reality. A WMD is defined as any weapon with the capacity to inflict death and destruction on such a massive scale that its very presence in the hands of hostile forces is a grievous threat. Events of the past few years including the bombing of the World Trade Center in 1993, the Murrah Federal Building in Oklahoma City in 1995 and the use of planes as guided missiles directed into the Pentagon and New York’s Twin Towers in 2001 (9/11) and the tragic incidents involving twenty-three people who were infected and five who died as a result of contact with anthrax-laced mail in the Fall of 2001, have well established that the United States can be attacked by both domestic and international terrorists without warning or provocation. In light of these actions, hospitals have been working vigorously to ensure that they would be “ready” in the event of another terrorist attack to provide appropriate medical care to victims. However, according to a recent United States General Accounting Office (GAO) nationwide survey, our nation’s hospitals still are not prepared to manage mass causalities resulting from chemical or biological WMD. Therefore, there is a clear need for information about current hospital preparedness in order to provide a foundation for systematic planning and broader discussions about relative cost, probable effectiveness, environmental impact and overall societal priorities. Hence, the aim of this research was to examine the current preparedness of hospitals in the State of Mississippi to manage victims of terrorist attacks involving chemical or biological WMD. All acute care hospitals in the State were selected for inclusion in this study. Both quantitative and qualitative methods were utilized for data collection and analysis. Six hypotheses were tested. Using a

  2. An x ray scatter approach for non-destructive chemical analysis of low atomic numbered elements

    Science.gov (United States)

    Ross, H. Richard

    1993-01-01

    A non-destructive x-ray scatter (XRS) approach has been developed, along with a rapid atomic scatter algorithm for the detection and analysis of low atomic-numbered elements in solids, powders, and liquids. The present method of energy dispersive x-ray fluorescence spectroscopy (EDXRF) makes the analysis of light elements (i.e., less than sodium; less than 11) extremely difficult. Detection and measurement become progressively worse as atomic numbers become smaller, due to a competing process called 'Auger Emission', which reduces fluorescent intensity, coupled with the high mass absorption coefficients exhibited by low energy x-rays, the detection and determination of low atomic-numbered elements by x-ray spectrometry is limited. However, an indirect approach based on the intensity ratio of Compton and Rayleigh scattered has been used to define light element components in alloys, plastics and other materials. This XRS technique provides qualitative and quantitative information about the overall constituents of a variety of samples.

  3. NUMERICAL SIMULATIONS OF SUPERNOVA DUST DESTRUCTION. I. CLOUD-CRUSHING AND POST-PROCESSED GRAIN SPUTTERING

    International Nuclear Information System (INIS)

    Silvia, Devin W.; Smith, Britton D.; Michael Shull, J.

    2010-01-01

    We investigate through hydrodynamic simulations the destruction of newly formed dust grains by sputtering in the reverse shocks of supernova (SN) remnants. Using an idealized setup of a planar shock impacting a dense, spherical clump, we implant a population of Lagrangian particles into the clump to represent a distribution of dust grains in size and composition. We then post-process the simulation output to calculate the grain sputtering for a variety of species and size distributions. We explore the parameter space appropriate for this problem by altering the overdensity of the ejecta clumps and the speed of the reverse shocks. Since radiative cooling could lower the temperature of the medium in which the dust is embedded and potentially protect the dust by slowing or halting grain sputtering, we study the effects of different cooling methods over the timescale of the simulations. In general, our results indicate that grains with radii less than 0.1 μm are sputtered to much smaller radii and often destroyed completely, while larger grains survive their interaction with the reverse shock. We also find that, for high ejecta densities, the percentage of dust that survives is strongly dependent on the relative velocity between the clump and the reverse shock, causing up to 50% more destruction for the highest velocity shocks. The fraction of dust destroyed varies widely across grain species, ranging from total destruction of Al 2 O 3 grains to minimal destruction of Fe grains (only 20% destruction in the most extreme cases). C and SiO 2 grains show moderate to strong sputtering as well, with 38% and 80% mass loss. The survival rate of grains formed by early SNe is crucial in determining whether or not they can act as the 'dust factories' needed to explain high-redshift dust.

  4. Destruction as a Step in Heidegger\\'s Phenomenology

    Directory of Open Access Journals (Sweden)

    M.J Safian

    2014-09-01

    Full Text Available One of the most controversial issues in Heidegger’s philosophy is his claim that western philosophy tradition has overlooked the issue of Being. Heidegger’s attempt is to reveal the origins of this negligence by means of destruction. However, it seems that through such claim Heidegger aims to destroy and disvalue this tradition. In addition to defining and explaining destruction, our purpose in this article is to show that Heidegger’s goal is not to destroy the tradition of philosophy but the term destruction refers to a process which is a step in Heidegger’s phenomenology by means of which one can conceive and perceive Being better because only through such destruction ontology can fully assure itself in a phenomenological way of the genuine character of its concepts. The necessity of doing destruction in Heidegger’s thought has also been discussed and his persistence on it has been shown in two of his works, one belongs to early and another to later Heidegger.

  5. Destructive electronics from electrochemical-mechanically triggered chemical dissolution

    International Nuclear Information System (INIS)

    Sim, Kyoseung; Wang, Xu; Yu, Cunjiang; Li, Yuhang; Linghu, Changhong; Song, Jizhou; Gao, Yang

    2017-01-01

    The considerable need to enhance data and hardware security suggest one possible future for electronics where it is possible to destroy them and even make them disappear physically. This paper reports a type of destructive electronics which features fast transience from chemical dissolution on-demand triggered in an electrochemical-mechanical manner. The detailed materials, mechanics, and device construction of the destructive electronics are presented. Experiment and analysis of the triggered releasing and transience study of electronic materials, resistors and metal-oxide-semiconductor field effect transistors illustrate the key aspects of the destructive electronics. The reported destructive electronics is useful in a wide range of areas from security and defense, to medical applications (paper)

  6. Non-destructive testing. V. 2

    International Nuclear Information System (INIS)

    Farley, J.M.; Nichols, R.W.

    1988-01-01

    The book entitled 'Non-destructive Testing' Volume 2, contains the proceedings of the fourth European Conference, organized by the British Institute of Non-Destructive Testing and held in London, September 1987. The volume contains seven chapters which examine the reliability of NDT, the economics of NDT and the use of NDT in:- civil engineering; oil, gas, coal and petrochemical industries; iron and steel industries; aerospace industry; and the nuclear and electricity supply industries. The seven chapters contain 78 papers, of which 19 are selected for INIS and indexed separately. (U.K.)

  7. Combating the spread of weapons of mass destruction: Some reflections. Essay, published in Le Monde

    International Nuclear Information System (INIS)

    ElBaradei, M.

    2003-01-01

    With all the changes in international relations since the end of the Cold War, nuclear weapons have continued to have a position of prominence as the currency of ultimate power. And although a number of countries such as South Africa have given up their nuclear weapons or nuclear weapons ambitions, the nuclear umbrellas of NATO and other alliances continue to expand. More importantly, the objectives embodied in the Treaty on the Non-Proliferation of Nuclear Weapons (NPT), developed in the early 1970s to control the spread of nuclear weapons and to move us towards nuclear disarmament, are under growing stress. Several thousands of nuclear weapons continue to exist in the five nuclear weapon States party to the NPT (China, France, Russia, the United Kingdom, and the United States). And of the three countries that remain outside the NPT, two India and Pakistan have in the last few years demonstrated their nuclear weapons capability, while the third Israel is generally presumed to have such weapons. Most recently North Korea, a party to the NPT, has decided to walk away from the Treaty and, not unlike some other parties to the Treaty, is suspected of working to acquire nuclear weapons. Other States, on the other hand, have opted for the 'poor man's alternative' by pursuing the acquisition of chemical and biological weapons. And in the aftermath of the events of 11 September 2001, the threat of Weapons of mass destruction (WMD) proliferation gained a new dimension: the prospect of sub-national groups seeking to acquire and use these weapons. Faced with this reality, one must conclude that it is futile to try to combat the spread of WMD through a collective, rule-based system of international security and that people have to acquiesce to living in a world plagued with the constant threat of a nuclear holocaust or other disasters? But reliance on a system of collective security to curb the proliferation of WMD will require bold thinking, a willingness to work together

  8. System Models of Information, Communication and Mass Communication: Revaluation of Some Basic Concepts of Communication.

    Science.gov (United States)

    Wiio, Osmo A.

    A more unified approach to communication theory can evolve through systems modeling of information theory, communication modes, and mass media operations. Such systematic analysis proposes, as is the case care here, that information models be based upon combinations of energy changes and exchanges and changes in receiver systems. The mass media is…

  9. Treatment of statin compounds by advanced oxidation processes: Kinetic considerations and destruction mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    Razavi, Behnaz, E-mail: brazavi@uci.ed [Urban Water Research Center, Department of Civil and Environmental Engineering, University of California, Irvine, Irvine, CA 92697-2175 (United States); Song Weihua, E-mail: wsong@uci.ed [Urban Water Research Center, Department of Civil and Environmental Engineering, University of California, Irvine, Irvine, CA 92697-2175 (United States); Santoke, Hanoz, E-mail: hsantoke@uci.ed [Urban Water Research Center, Department of Civil and Environmental Engineering, University of California, Irvine, Irvine, CA 92697-2175 (United States); Cooper, William J., E-mail: wcooper@uci.ed [Urban Water Research Center, Department of Civil and Environmental Engineering, University of California, Irvine, Irvine, CA 92697-2175 (United States)

    2011-03-15

    This study examined the use of advanced oxidation/reduction processes (AO/RPs) for the destruction of cholesterol lowering statin pharmaceuticals. AO/RPs which utilize the oxidizing hydroxyl radical ({sup {center_dot}O}H) and reducing aqueous electron (e{sup -}{sub aq}), to degrade chemical contaminants are alternatives to traditional water treatment methods, and are alternatives as water reuse becomes more generally implemented. Four major statin pharmaceuticals, fluvastatin, lovastatin, pravastatin and simvastatin, were studied, and the absolute bimolecular reaction rate constants with {sup {center_dot}O}H determined, (6.96{+-}0.16)x10{sup 9}, (2.92{+-}0.06)x10{sup 9}, (4.16{+-}0.13)x10{sup 9}, and (3.13{+-}0.15)x10{sup 9} M{sup -1} s{sup -1}, and for e{sup -}{sub aq} (2.31{+-}0.06)x10{sup 9}, (0.45{+-}0.01)x10{sup 9}, (1.26{+-}0.01)x10{sup 9}, and (0.69{+-}0.02)x10{sup 9} M{sup -1} s{sup -1}, respectively. To provide additional information on the radicals formed upon oxidation, transient spectra were measured and the overall reaction efficiency determined. Radical-based destruction mechanisms for destruction of the statins are proposed based on the LC-MS determination of the stable reaction by-products formed using {sup 137}Cs {gamma}-irradiation of statin solutions. Knowing the reaction rates, reaction efficiencies and destruction mechanisms of these compounds is essential for the consideration of the use of advanced oxidation/reduction processes for the destruction of statins in aqueous systems.

  10. Body Mass Index and the Use of the Internet for Health Information

    Science.gov (United States)

    Faith, Jennifer; Thorburn, Sheryl; Smit, Ellen

    2016-01-01

    Objective: Individuals who experience or anticipate negative interactions from medical providers related to conditions such as obesity may preferentially use the Internet for health information. Our objectives in this study were to (1) examine the association between body mass index (BMI) and Internet health information-seeking and (2) examine…

  11. Responding to Destructive Interpersonal Interactions: A way forward ...

    African Journals Online (AJOL)

    Responding to Destructive Interpersonal Interactions: A way forward for ... cultural intolerance and other destructive interpersonal interactions and relationships clearly ... This work is licensed under a Creative Commons Attribution 3.0 License.

  12. Nova Ophiuchus 2017 as a Probe of 13C Nucleosynthesis and Carbon Monoxide Formation and Destruction in Classical Novae

    Science.gov (United States)

    Joshi, Vishal; Banerjee, D. P. K.; Srivastava, Mudit

    2017-12-01

    We present a series of near-infrared spectra of Nova Ophiuchus 2017 in the K band that record the evolution of the first overtone CO emission in unprecedented detail. Starting from 11.7 days after maximum, when CO is first detected at great strength, the spectra track the CO emission to +25.6 days by which time it is found to have rapidly declined in strength by almost a factor of ∼35. The cause for the rapid destruction of CO is examined in the framework of different mechanisms for CO destruction, namely, an increase in photoionizating flux, chemical pathways of destruction, or destruction by energetic nonthermal particles created in shocks. From LTE modeling of the CO emission, the 12C/13C ratio is determined to be 1.6 ± 0.3. This is consistent with the expected value of this parameter from nucleosynthesis theory for a nova eruption occuring on a low mass (∼ 0.6 {M}ȯ ) carbon–oxygen core white dwarf. The present 12C/13C estimate constitutes one of the most secure estimates of this ratio in a classical nova.

  13. Non-destructive testing of CFC/Cu joints

    International Nuclear Information System (INIS)

    Casalegno, V.; Ferraris, M.; Salvo, M.; Vesprini, R.; Merola, M.

    2006-01-01

    Reliable non-destructive tests (NDT) are fundamental for the manufacturing of ITER components, especially for high heat flux plasma facing components. NDT include various techniques, which allow inspection of a component without impairing serviceability; it's important to detect and characterize defects (type, size and position) as well as the set-up of acceptance standards in order to predict their influence on the component performance in service conditions. The present study shows a description of NDT used to assess the manufacturing quality of CFC (carbon fibre reinforced carbon matrix composites)/Cu/CuCrZr joints. In the ITER divertor, armor tiles made of CFC are joined to the cooling structure made of precipitation hardened copper alloy CuCrZr; a soft pure Cu interlayer is required between the heat sink and the armour in order to mitigate the stresses at the joint interface. NDT on CFC/Cu joint are difficult because of the different behavior of CFC and copper with regard to physical excitations (e.g. ultrasonic wave) used to test the component; furthermore the response to this input must be accurately studied to identify the detachment of CFC tiles from Cu alloy. The inspected CFC/Cu/CuCrZr joints were obtained through direct casting of pure Cu on modified CFC surface and subsequently through brazing of CFC/Cu joints to CuCrZr by a Cu-based alloy. Different non-destructive methods were used for inspecting these joints: lock-in thermography, ultrasonic inspections, microtomography and microradiography. The NDT tests were followed by metallographic investigation on the samples, since the reliability of a certain non destructive test can be only validated by morphological evidence of the detected defects. This study will undertake a direct comparison of NDT used on CFC/Cu joints in terms of real flaws presence. The purpose of this work is to detect defects at the joining interface as well as in the cast copper ( for instance voids). The experimental work was

  14. Guidebook on destructive examination of water reactor fuel

    International Nuclear Information System (INIS)

    1997-01-01

    As a result of common efforts of fuel vendors, utilities and research institutes the average burnup pf design batch fuels was increased for both PWRs and BWRs and the fuel failure rate has been reduced. The previously published Guidebook on Non-Destructive Examination of Water Reactor Fuel recommended that more detailed destructive techniques are required for complete understanding of fuel performance. On the basis of contributions of the 14 participants in the ED-WARF-II CRP and proceedings of IAEA Technical Committee on Recent Developments in Post-irradiation Examination Techniques for Water Reactor Fuel this guidebook was compiled. It gives a complete survey of destructive techniques available to date worldwide. The following examination techniques are described in detailed including major principles of equipment design: microstructural studies; elemental analysis; isotopic analysis; measurement of physical properties; measurement of mechanical properties. Besides the examination techniques, methods for refabrication of experimental rods from high burnup power reactor rods as well as methods for verification of non-destructive techniques by using destructive techniques is included

  15. Multi-energy radiography for non-destructive testing of materials and structures for civil engineering

    International Nuclear Information System (INIS)

    Naydenov, S.V.; Ryzhikov, V.

    2003-01-01

    Development of the technological base of modern non-destructive testing require new methods allowing determination of specified properties of materials and structures under study. A traditional direction of works is determination of internal spatial structure of the materials and other constructions. Restoration of this geometrical information is of qualitative character, though provides for determination of technical parameters affecting physical properties of the system. Reconstruction of the chemical composition, density and atomic structure (effective atomic number) is an inverse problem of direct quantitative determination of properties starting from data obtained by means of non-destructive testing. In the present work, we propose the use of multi-energy radiography for reconstruction of the substantial structure of materials. In framework of simple theoretical model it is shown that, using multi-channel absorption of X-rays, important substantial characteristics of materials and multi-compound structures can be readily reconstructed. The results obtained show high efficiency of 2-energy radiography for non-destructive testing in civil engineering

  16. An investigation of homogeneous and heterogeneous sonochemistry for the destruction of hazardous substances. Progress report, 1996 - 1997

    International Nuclear Information System (INIS)

    Hua, I.

    1997-01-01

    'The primary objective of this research project is to acquire a deeper fundamental knowledge of acoustic cavitation and cavitation chemistry, and in doing so, to ascertain how ultrasonic irradiation can be more effectively applied to environmental problems. Four on-going projects will be described in this progress report, The first project is the destruction of carbofuran in a Near-Field Acoustical Processor (NAP), and the hydrodynamic characterization of the reactor. The second project is a comprehensive study of how ultrasonic frequency influences sonochemical reaction rates; the substrate it, the preliminary portion of this study has been hydrogen peroxide formation. The third project in progress is destruction of four polychlorinated biphenyls at 20 kHz. Work so far has been at 20 kHz, but the most significant portion of this project will involve a multi-frequency (ultrasonic frequency) study. Finally, the destruction of a pesticide, dichlorvos, during sonication at 500 kHz will be described. Preliminary work during the first year has emphasized determination of kinetics; further work (years 2--3) will be focused upon closing mass balances and identifying transformation products.'

  17. An assessment of the Canadian Forces' capability to manage the consequences of the domestic use of chemical, biological, radiological or nuclear weapons of mass destruction

    International Nuclear Information System (INIS)

    Pickering, W.L.

    2003-01-01

    In view of the threat to Canadian domestic targets presented by the asymmetric use of chemical, biological, radiological or nuclear (CBRN) weapons of mass destruction (WMD), this thesis examines whether the Canadian Forces (CF) has capability deficiencies in managing the consequences of such an attack. Research included an examination of the post Cold War strategic environment, the state of the art in CBRN technology, current concepts and experience in managing the consequences of major disasters and responsibilities at the municipal, provincial and federal levels of government. The methodology used included scenario based planning to develop circumstances where WMD might be used domestically, and decomposition to break down the scenarios into events and potential CF roles and tasks. The current CF structure was used to determine the probable CF response, which included the ability of CF units to perform the required tasks, the CF response time and the ability of the CF to sustain the operation. (author)

  18. Osteoclast inhibition impairs chondrosarcoma growth and bone destruction.

    Science.gov (United States)

    Otero, Jesse E; Stevens, Jeff W; Malandra, Allison E; Fredericks, Douglas C; Odgren, Paul R; Buckwalter, Joseph A; Morcuende, Jose

    2014-12-01

    Because Chondrosarcoma is resistant to available chemotherapy and radiation regimens, wide resection is the mainstay in treatment, which frequently results in high morbidity and which may not prevent local recurrence. There is a clear need for improved adjuvant treatment of this malignancy. We have observed the presence of osteoclasts in the microenvironment of chondrosarcoma in human pathological specimens. We utilized the Swarm rat chondrosarcoma (SRC) model to test the hypothesis that osteoclasts affect chondrosarcoma pathogenesis. We implanted SRC tumors in tibia of Sprague-Dawley rats and analyzed bone histologically and radiographically for bone destruction and tumor growth. At three weeks, tumors invaded local bone causing cortical disruption and trabecular resorption. Bone destruction was accompanied by increased osteoclast number and resorbed bone surface. Treatment of rats with the zoledronic acid prevented cortical destruction, inhibited trabecular resorption, and resulted in decreased tumor volume in bone. To confirm that inhibition of osteoclasts per se, and not off-target effects of drug, was responsible for the prevention of tumor growth and bone destruction, we implanted SRC into osteopetrotic rat tibia. SRC-induced bone destruction and tumor growth were impaired in osteopetrotic bone compared with control bone. The results from our animal model demonstrate that osteoclasts contribute to chondrosarcoma-mediated bone destruction and tumor growth and may represent a therapeutic target in particular chondrosarcoma patients. © 2014 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

  19. Silicone Stent Placement for Primary Tracheal Amyloidosis Accompanied by Cartilage Destruction

    OpenAIRE

    Ryu, Duck Hyun; Eom, Jung Seop; Jeong, Ho Jung; Kim, Jung Hoon; Lee, Ji Eun; Jun, Ji Eun; Song, Dae Hyun; Han, Joungho; Kim, Hojoong

    2014-01-01

    Primary tracheal amyloidosis (PTA) can lead to airway obstructions, and patients with severe PTA should undergo bronchoscopic interventions in order to maintain airway patency. Focal airway involvements with amyloidosis can only be treated with mechanical dilatation. However, the PTA with diffused airway involvements and concomitant cartilage destructions requires stent placement. Limited information regarding the usefulness of silicone stents in patients with PTA has been released. Therefore...

  20. Destruction of high explosives and wastes containing high explosives using the molten salt destruction process

    International Nuclear Information System (INIS)

    Upadhye, R.S.; Brummond, W.A.; Pruneda, C.O.

    1992-01-01

    This paper reports the Molten Salt Destruction (MSD) Process which has been demonstrated for the destruction of HE and HE-containing wastes. MSD has been used by Rockwell International and by Anti-Pollution Systems to destroy hazardous wastes. MSD converts the organic constituents (including the HE) of the waste into non-hazardous substances such as carbon dioxide, nitrogen and water. In the case of HE-containing mixed wastes, any actinides in the waste are retained in the molten salt, thus converting the mixed wastes into low-level wastes. (Even though the MSD process is applicable to mixed wastes, this paper will emphasize HE-treatment.) The destruction of HE is accomplished by introducing it, together with oxidant gases, into a crucible containing a molten salt, such as sodium carbonate, or a suitable mixture of the carbonates of sodium, potassium, lithium and calcium. The temperature of the molten salt can be between 400 to 900 degrees C. The combustible organic components of the waste react with oxygen to produce carbon dioxide, nitrogen and steam

  1. Postradiation destruction of dextran in solutions

    International Nuclear Information System (INIS)

    Bondarenko, N.T.; Sharpatyj, V.A.

    1989-01-01

    Methods of pH-metry, UV absorption and ESR spectroscopy were used to study the oxidation destruction of dextran solutions, stored in the air after gamma irradiation ( 60 Co) bydoses of up to 200 kGy. It is shown that polymer destruction under mentioned conditions is initiated by hydroperoxide decomposition with successive radical transformation into peroxides. Experimentally observed periodical change of acidity of irradiated dextran solutions is also explained by transformations of peroxy radicals

  2. High-precision mass measurements in the realm of the deformed shell closure N=152

    Energy Technology Data Exchange (ETDEWEB)

    Eibach, Martin Andreas

    2013-12-04

    The nuclear masses reflect the sum of all interactions inside a nucleus. Their precise knowledge can be used to benchmark nuclear mass models and to gain nuclear structure information. Penning-trap mass spectrometers have proven their potential to obtain lowest uncertainties. Uniquely located at a nuclear reactor, the double Penning-trap mass spectrometer TRIGA-TRAP is dedicated to measurements in the neutron-rich region. For a gain in sensitivity a non-destructive detection system for single ion mass measurements was adopted. This includes the implementation of a narrow band-pass filter tuned to the heavy ion cyclotron frequency as well as a cryogenic low-noise amplifier. For on-line mass measurements, the laser ablation ion source was equipped with a newly developed miniature radiofrequency quadrupole trap in order to improve the extraction efficiency. A more economic use of the radioactive material enabled mass measurements using only 10{sup 15} atoms of target material. New mass measurements were performed within this work in the realm of the deformed shell closure N=152. Their implementation into the atomic-mass evaluation improved the uncertainty of more than 80 nuclides in the heavy mass region and simultaneously shifted the absolute mass of two α decay chains.

  3. Laser ultrasound and simulated time reversal on bulk waves for non destructive control

    International Nuclear Information System (INIS)

    Diot, G; Walaszek, H; Kouadri-David, A; Guégan, S; Flifla, J

    2014-01-01

    Laser welding of aluminium generally creates embedded welding defects, such as porosities or cracks. Non Destructive Inspection (NDI) after processing may ensure an acceptable weld quality by defect detection. Nowadays, NDI techniques used to control the inside of a weld are mainly limited to X-Rays or ultrasonics. The current paper describes the use of a Laser Ultrasound (LU) technique to inspect porosities in 2 and 4-mm thick sheet lap welds. First experimentations resulted in the detection of 0.5-mm drilled holes in bulk aluminium sheets. The measurement of the depth of these defects is demonstrated too. Further experimentations shows the applicability of the LU technique to detect porosities in aluminium laser welds. However, as the interpretation of raw measures is limiting the detection capacity of this technique, we developed a signal processing using Time-Reversal capabilities to enhance detection capacities. Furthermore, the signal processing output is a geometrical image of the material's inner state, increasing the ease of interpretation. It is based on a mass-spring simulation which enables the back-propagation of the acquired ultrasound signal. The spring-mass simulation allows the natural generation of all the different sound waves and thus enables the back-propagation of a raw signal without any need of filtering or wave identification and extraction. Therefore the signal processing uses the information contained in the compression wave as well as in the shear wave

  4. Status report on the destructive and non-destructive examinations of U-bends removed from Trojan steam generator D

    International Nuclear Information System (INIS)

    Aspden, R.G.

    1981-01-01

    The last status report on the non-destructive examination of U-bends removed from Trojan steam generator D was dated July 7, 1980. As part of this activity, the measurement of wall thicknesses on selected U-bends was planned using an ultrasonic gage. These readings were not made because reproducible results could not be obtained using water as the coupling fluid which was necessary to avoid contamination. Three tubes from the same heat were selected for destructive examination at Westinghouse: one leaking U-bend (R1-C6) and two tubes with no indications (R1-C10 and R1-C22). Results of the examination procedure are presented. The non-destructive examination results from the July 7, 1980 report for 29 U-bends are included

  5. Quantum information entropies for position-dependent mass Schrödinger problem

    Energy Technology Data Exchange (ETDEWEB)

    Yañez-Navarro, G. [Departamento de Física, Escuela Superior de Física y Matemáticas, Instituto Politécnico Nacional, Edificio 9, UPALM, Mexico D. F. 07738 (Mexico); Sun, Guo-Hua, E-mail: sunghdb@yahoo.com [Centro Universitario Valle de Chalco, Universidad Autónoma del Estado de México, Valle de Chalco Solidaridad, Estado de México, 56615 (Mexico); Dytrych, T., E-mail: tdytrych@gmail.com [Department of Physics and Astronomy, Louisiana State University, Baton Rouge, LA 70803-4001 (United States); Launey, K.D., E-mail: kristina@baton.phys.lsu.edu [Department of Physics and Astronomy, Louisiana State University, Baton Rouge, LA 70803-4001 (United States); Dong, Shi-Hai, E-mail: dongsh2@yahoo.com [Departamento de Física, Escuela Superior de Física y Matemáticas, Instituto Politécnico Nacional, Edificio 9, UPALM, Mexico D. F. 07738 (Mexico); Department of Physics and Astronomy, Louisiana State University, Baton Rouge, LA 70803-4001 (United States); Draayer, J.P., E-mail: draayer@sura.org [Department of Physics and Astronomy, Louisiana State University, Baton Rouge, LA 70803-4001 (United States)

    2014-09-15

    The Shannon entropy for the position-dependent Schrödinger equation for a particle with a nonuniform solitonic mass density is evaluated in the case of a trivial null potential. The position S{sub x} and momentum S{sub p} information entropies for the three lowest-lying states are calculated. In particular, for these states, we are able to derive analytical solutions for the S{sub x} entropy as well as for the Fourier transformed wave functions, while the S{sub p} quantity is calculated numerically. We notice the behavior of the S{sub x} entropy, namely, it decreases as the mass barrier width narrows and becomes negative beyond a particular width. The negative Shannon entropy exists for the probability densities that are highly localized. The mass barrier determines the stability of the system. The dependence of S{sub p} on the width is contrary to the one for S{sub x}. Some interesting features of the information entropy densities ρ{sub s}(x) and ρ{sub s}(p) are demonstrated. In addition, the Bialynicki-Birula–Mycielski (BBM) inequality is tested for a number of states and found to hold for all the cases.

  6. Quantum information entropies for position-dependent mass Schrödinger problem

    International Nuclear Information System (INIS)

    Yañez-Navarro, G.; Sun, Guo-Hua; Dytrych, T.; Launey, K.D.; Dong, Shi-Hai; Draayer, J.P.

    2014-01-01

    The Shannon entropy for the position-dependent Schrödinger equation for a particle with a nonuniform solitonic mass density is evaluated in the case of a trivial null potential. The position S x and momentum S p information entropies for the three lowest-lying states are calculated. In particular, for these states, we are able to derive analytical solutions for the S x entropy as well as for the Fourier transformed wave functions, while the S p quantity is calculated numerically. We notice the behavior of the S x entropy, namely, it decreases as the mass barrier width narrows and becomes negative beyond a particular width. The negative Shannon entropy exists for the probability densities that are highly localized. The mass barrier determines the stability of the system. The dependence of S p on the width is contrary to the one for S x . Some interesting features of the information entropy densities ρ s (x) and ρ s (p) are demonstrated. In addition, the Bialynicki-Birula–Mycielski (BBM) inequality is tested for a number of states and found to hold for all the cases

  7. Physical basis of destruction of concrete and other building materials

    Science.gov (United States)

    Suleymanova, L. A.; Pogorelova, I. A.; Kirilenko, S. V.; Suleymanov, K. A.

    2018-03-01

    In the article the scientifically-grounded views of authors on the physical essence of destruction process of concrete and other materials are stated; it is shown that the mechanism of destruction of materials is similar in its essence during the mechanical, thermal, physical-chemical and combined influences, and that in its basis Newton's third law lays. In all cases destruction consists in decompaction of structures, loosening of the internal bonds in materials, in the further integrity damage and their division into separate loosely-bound (full destruction) and unbound with each other (incomplete destruction) elements, which depends on the kind of external influence and perfection of materials structure.

  8. 27 CFR 24.294 - Destruction of wine.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Destruction of wine. 24..., DEPARTMENT OF THE TREASURY LIQUORS WINE Removal, Return and Receipt of Wine Removals Without Payment of Tax § 24.294 Destruction of wine. (a) General. Wine on bonded wine premises may be destroyed on or off wine...

  9. Non-destructive characterization using pulsed fast-thermal neutrons

    International Nuclear Information System (INIS)

    Womble, P.C.

    1995-01-01

    Explosives, illicit drugs, and other contraband materials contain various chemical elements in quantities and ratios that differentiate them from each other and from innocuous substances. Furthermore, the major chemical elements in coal can provide information about various parameters of importance to the coal industry. In both examples, the non-destructive identification of chemical elements can be performed using pulsed fast-thermal neutrons that, through nuclear reactions, excite the nuclei of the various elements. This technique is being currently developed for the dismantling of nuclear weapons classified as trainers, and for the on-line coal bulk analysis. (orig.)

  10. Locomotion and muscle mass measures in a murine model of collagen-induced arthritis

    NARCIS (Netherlands)

    Hartog, A.; Hulsman, J.; Garssen, J.

    2009-01-01

    Background: Rheumatoid arthritis (RA) is characterized by chronic poly-arthritis, synovial hyperplasia, erosive synovitis, progressive cartilage and bone destruction accompanied by a loss of body cell mass. This loss of cell mass, known as rheumatoid cachexia, predominates in the skeletal muscle and

  11. EFFLUENT TREATMENT FACILITY PEROXIDE DESTRUCTION CATALYST TESTING

    International Nuclear Information System (INIS)

    HALGREN DL

    2008-01-01

    The 200 Area Effluent Treatment Facility (ETF) main treatment train includes the peroxide destruction module (PDM) where the hydrogen peroxide residual from the upstream ultraviolet light/hydrogen peroxide oxidation unit is destroyed. Removal of the residual peroxide is necessary to protect downstream membranes from the strong oxidizer. The main component of the PDM is two reaction vessels utilizing granular activated carbon (GAC) as the reaction media. The PDM experienced a number of operability problems, including frequent plugging, and has not been utilized since the ETF changed to groundwater as the predominant feed. The unit seemed to be underperforming in regards to peroxide removal during the early periods of operation as well. It is anticipated that a functional PDM will be required for wastewater from the vitrification plant and other future streams. An alternate media or methodology needs to be identified to replace the GAC in the PDMs. This series of bench scale tests is to develop information to support an engineering study on the options for replacement of the existing GAC method for peroxide destruction at the ETF. A number of different catalysts will be compared as well as other potential methods such as strong reducing agents. The testing should lead to general conclusions on the viability of different catalysts and identify candidates for further study and evaluation

  12. Grain destruction in interstellar shocks

    International Nuclear Information System (INIS)

    Seab, C.G.; Shull, J.M.

    1984-01-01

    One of the principal methods for removing grains from the Interstellar Medium is to destroy them in shock waves. Previous theoretical studies of shock destruction have generally assumed only a single size and type of grain; most do not account for the effect of the grain destruction on the structure of the shock. Earlier calculations have been improved in three ways: first, by using a ''complete'' grain model including a distribution of sizes and types of grains; second, by using a self-consistent shock structure that incorporates the changing elemental depletions as the grains are destroyed; and third, by calculating the shock-processed ultraviolet extinction curves for comparison with observations. (author)

  13. Improvement of non-destructive fissile mass assays in α low-level waste drums: A matrix correction method based on neutron capture gamma-rays and a neutron generator

    Science.gov (United States)

    Jallu, F.; Loche, F.

    2008-08-01

    Within the framework of radioactive waste control, non-destructive assay (NDA) methods may be employed. The active neutron interrogation (ANI) method is now well-known and effective in quantifying low α-activity fissile masses (mainly 235U, 239Pu, 241Pu) with low densities, i.e. less than about 0.4, in radioactive waste drums of volumes up to 200 l. The PROMpt Epithermal and THErmal interrogation Experiment (PROMETHEE [F. Jallu, A. Mariani, C. Passard, A.-C. Raoux, H. Toubon, Alpha low level waste control: improvement of the PROMETHEE 6 assay system performances. Nucl. Technol. 153 (January) (2006); C. Passard, A. Mariani, F. Jallu, J. Romeyer-Dherber, H. Recroix, M. Rodriguez, J. Loridon, C. Denis, PROMETHEE: an alpha low level waste assay system using passive and active neutron measurement methods. Nucl. Technol. 140 (December) (2002) 303-314]) based on ANI has been under development since 1996 to reach the incinerating α low level waste (LLW) criterion of about 50 Bq[α] per gram of crude waste (≈50 μg Pu) in 118 l drums on the date the drums are conditioned. Difficulties arise when dealing with matrices containing neutron energy moderators such as H and neutron absorbents such as Cl. These components may have a great influence on the fissile mass deduced from the neutron signal measured by ANI. For example, the calibration coefficient measured in a 118 l drum containing a cellulose matrix (density d = 0.144 g cm -3) may be 50 times higher than that obtained in a poly-vinyl-chloride matrix ( d = 0.253 g cm -3). Without any information on the matrix, the fissile mass is often overestimated due to safety procedures and by considering the most disadvantageous calibration coefficient corresponding to the most absorbing and moderating calibration matrix. The work discussed in this paper was performed at the CEA Nuclear Measurement Laboratory in France. It concerns the development of a matrix effect correction method, which consists in identifying and quantifying

  14. Improvement of non-destructive fissile mass assays in α low-level waste drums: A matrix correction method based on neutron capture gamma-rays and a neutron generator

    International Nuclear Information System (INIS)

    Jallu, F.; Loche, F.

    2008-01-01

    Within the framework of radioactive waste control, non-destructive assay (NDA) methods may be employed. The active neutron interrogation (ANI) method is now well-known and effective in quantifying low α-activity fissile masses (mainly 235 U, 239 Pu, 241 Pu) with low densities, i.e. less than about 0.4, in radioactive waste drums of volumes up to 200 l. The PROMpt Epithermal and THErmal interrogation Experiment (PROMETHEE [F. Jallu, A. Mariani, C. Passard, A.-C. Raoux, H. Toubon, Alpha low level waste control: improvement of the PROMETHEE 6 assay system performances. Nucl. Technol. 153 (January) (2006); C. Passard, A. Mariani, F. Jallu, J. Romeyer-Dherber, H. Recroix, M. Rodriguez, J. Loridon, C. Denis, PROMETHEE: an alpha low level waste assay system using passive and active neutron measurement methods. Nucl. Technol. 140 (December) (2002) 303-314]) based on ANI has been under development since 1996 to reach the incinerating α low level waste (LLW) criterion of about 50 Bq[α] per gram of crude waste (∼50 μg Pu) in 118 l drums on the date the drums are conditioned. Difficulties arise when dealing with matrices containing neutron energy moderators such as H and neutron absorbents such as Cl. These components may have a great influence on the fissile mass deduced from the neutron signal measured by ANI. For example, the calibration coefficient measured in a 118 l drum containing a cellulose matrix (density d = 0.144 g cm -3 ) may be 50 times higher than that obtained in a poly-vinyl-chloride matrix (d = 0.253 g cm -3 ). Without any information on the matrix, the fissile mass is often overestimated due to safety procedures and by considering the most disadvantageous calibration coefficient corresponding to the most absorbing and moderating calibration matrix. The work discussed in this paper was performed at the CEA Nuclear Measurement Laboratory in France. It concerns the development of a matrix effect correction method, which consists in identifying and

  15. Improvement of non-destructive fissile mass assays in {alpha} low-level waste drums: A matrix correction method based on neutron capture gamma-rays and a neutron generator

    Energy Technology Data Exchange (ETDEWEB)

    Jallu, F. [Commissariat a l' Energie Atomique, CEA, DEN, Nuclear Measurement Laboratory, Bat. 224, 13108 Saint Paul lez Durance (France)], E-mail: fanny.jallu@cea.fr; Loche, F. [Commissariat a l' Energie Atomique, CEA, DEN, Nuclear Measurement Laboratory, Bat. 224, 13108 Saint Paul lez Durance (France)

    2008-08-15

    Within the framework of radioactive waste control, non-destructive assay (NDA) methods may be employed. The active neutron interrogation (ANI) method is now well-known and effective in quantifying low {alpha}-activity fissile masses (mainly {sup 235}U, {sup 239}Pu, {sup 241}Pu) with low densities, i.e. less than about 0.4, in radioactive waste drums of volumes up to 200 l. The PROMpt Epithermal and THErmal interrogation Experiment (PROMETHEE [F. Jallu, A. Mariani, C. Passard, A.-C. Raoux, H. Toubon, Alpha low level waste control: improvement of the PROMETHEE 6 assay system performances. Nucl. Technol. 153 (January) (2006); C. Passard, A. Mariani, F. Jallu, J. Romeyer-Dherber, H. Recroix, M. Rodriguez, J. Loridon, C. Denis, PROMETHEE: an alpha low level waste assay system using passive and active neutron measurement methods. Nucl. Technol. 140 (December) (2002) 303-314]) based on ANI has been under development since 1996 to reach the incinerating {alpha} low level waste (LLW) criterion of about 50 Bq[{alpha}] per gram of crude waste ({approx}50 {mu}g Pu) in 118 l drums on the date the drums are conditioned. Difficulties arise when dealing with matrices containing neutron energy moderators such as H and neutron absorbents such as Cl. These components may have a great influence on the fissile mass deduced from the neutron signal measured by ANI. For example, the calibration coefficient measured in a 118 l drum containing a cellulose matrix (density d = 0.144 g cm{sup -3}) may be 50 times higher than that obtained in a poly-vinyl-chloride matrix (d = 0.253 g cm{sup -3}). Without any information on the matrix, the fissile mass is often overestimated due to safety procedures and by considering the most disadvantageous calibration coefficient corresponding to the most absorbing and moderating calibration matrix. The work discussed in this paper was performed at the CEA Nuclear Measurement Laboratory in France. It concerns the development of a matrix effect correction

  16. Destructive distillation

    Energy Technology Data Exchange (ETDEWEB)

    1938-07-05

    A process and apparatus for the destructive distillation at low temperature of mineral or organic material particularly oil shale, is given in which the process comprises distilling the material in a horizontal gaseous stream, subjecting the hot residues to the action of a gaseous stream containing a predetermined amount of oxygen so as to burn, at least partly, the carbon-containing substances, and the process uses the gases from this combustion for the indirect heating of the gases serving for the distillation.

  17. Destructive analytical services to safeguards: Activity report 1984-1987

    International Nuclear Information System (INIS)

    Bagliano, G.

    1987-08-01

    The report gives an evaluation of the volume, delays and quality of destructive analytical services provided in 84/01/01-87/06/30 in support of Agency Safeguards. General observations are also made. Problems and improvements are identified and trends indicated. The main features of the considered period are as follows: a) About 4,100 inspections samples were received and analyzed in the period 84/01/01-87/06/30 by SAL and NWAL. The samples represented 20 different types of materials issued from different nuclear fuel cycles. b) 496 out of 895 spent fuel samples analyzed in this period were distributed to NWAL. c) The chemical and isotopic analyses of Uranium, Thorium and Plutonium requested by the Inspectors (Americium also but occasionally) resulted in the report of a total of about 14,200 analytical results. d) The calibration of on-site measurements, the certification of Working Reference Materials for Destructive Analysis and the maintenance and improvement of Destructive Analysis required additional analytical services which were provided. e) At present, compared to 1983, the total verification delays by DA were shortened by 16%, 57% and 55% respectively for Uranium, Plutonium and spent fuel materials. f) Timely detection of abrupt diversion is achievable for the low enriched Uranium samples and are close to be achievable for the Plutonium and Spent Fuel Samples. g) Concepts, Procedures, and Materials for Analytical Quality Control Programmes of the measurements performed at SAL and NWAL were prepared. The analysis performed can be adequately accurate. h) Problems continue however to be encountered in the quality of the overall DA verification system. i) Major upgrading of equipment and procedures was undertaken at SAL. j) Other selective chemical assays were being tested and Isotope Dilution Mass Spec assays have been successfully set up for the analysis of 3 mg-sized Plutonium product samples. k) Close contacts have been kept with NWAL via Consultants

  18. Destruction of organic wastes by ammonium peroxydisulfate with electrolytic regeneration of the oxidant

    International Nuclear Information System (INIS)

    Cooper, J.F.; Wang, J.F.; Krueger, R.; King, K.

    1997-01-01

    Research is reported concerning a new aqueous process for oxidative destruction of solid- and liquid organic wastes. This process uses acidified ammonium peroxydisulfate and operates at ambient pressure and at 80- to 100 degrees C. The oxidant may be efficiently regenerated by electrolysis of the sulfate by-product at Pt anodes, even in the presence of organic and inorganic contaminants expected to be entrained in the cycle. Integral rate constants were determined for the oxidation of 25 diverse organic compounds at low (50 ppm) concentrations through fixed-time experiments with excess oxidant and a Pt wire catalyst. For high initial concentrations, uncatalyzed mineralization rates were measured for waste surrogates including kerosene, triethylamine, ion exchange resin, oxalic acid, trinitrotoluene, and cellulose. A packed bed reactor was tested with ethylene glycol, with offgas analysis by mass spectroscopy. Rate data extrapolate to throughputs of approximately 200 kg/m 3 -day. The process may benefit the destruction of highly toxic or specialized industrial wastes as well as the organic fraction of mixed wastes

  19. The results of cutting disks testing for rock destruction

    Directory of Open Access Journals (Sweden)

    Khoreshok Aleksey

    2017-01-01

    Full Text Available To determine the rational order of disk tools placement on the working body is necessary to know the maximum amount of rock, destroyed by the disk tool in benching cutting mode depending on the tool geometry parameters, physical and mechanical parameters of rocks. The article contains the definition of rational parameters of cutting disk tools as well as power and energy parameters of the destruction process by cutting disks and by executive body of the coal cutter. The rational geometric parameters of cutting discs are specified. It was found that each step of cutting with a minimum depth of penetration has its own maximum height of bench outcrop. The dependence of the volumes of large items destroyed by the disk tool on the cutting step height was determined. The existence of the cyclic alternation of destruction phases, regardless the fracture parameters, the height of the ledge outcrop, and tools like free cutting geometry were found. In contrast to the free cutting in benching mode of destruction two large fragments of rocks in one cycle were observed. Consequently, the cyclical nature of the destruction process in the benching mode will be characterized by two chips and crushing, and this cycling repeats throughout the destruction process with the same parameters of destruction.

  20. Survey of EEC solid waste arisings and performance of non-destructive assay systems

    International Nuclear Information System (INIS)

    Bremner, W.B.; Adaway, D.W.; Yates, A.

    1992-01-01

    This report covers the work carried out during an one-year contract which surveyed the radioactive solid waste arisings in EEC Member States and also tabulated information on the performance of the non-destructive assay (NDA) system used. The work was jointly carried out with CEA partners at Cadarache and Paris. The tabulated data give information on types, packaging, associated activity, and NDA capability of the utilities or research organisations. Some short comings in NDA capabilities are identified and possible solutions are given

  1. Technical area status report for second-stage destruction and offgas treatment

    International Nuclear Information System (INIS)

    French, N.B.; Dalton, J.D.; Vavruska, J.

    1994-08-01

    This report was sponsored by the Mixed Waste Integrated Program (MWIP), which was established by the Department of Energy (DOE), Office of Environmental Restoration and Waste Management (EM), Office of Technology Development (OTD). DOE/EM carries the charter to direct and coordinate waste management and site remediation throughout the DOE complex. Within EM, the OTD established the MWIP to identify and develop new technologies for treatment of DOE low-level mixed waste. This report represents the second TASR for the Second-Stage Destruction and Offgas Treatment technical area. This TASR updates technology information, a design methodology for air pollution control systems for mixed waste treatment, and technology development needs for DOE/EM. The TASRs form the basis of a technology development program that addresses the highest priority DOE environmental needs and is coordinated with other technology development efforts both inside and outside DOE. The main functions of the second-stage destruction and offgas treatment system are to treat the gaseous effluent from the primary treatment process to acceptable levels for release to the atmosphere. Specific functions include (1) destruction of volatile organics; (2) capture of particulate matter; (3) capture of volatile metals; (4) capture and control of volatile, condensed-phase, and solid-phase radionuclides; (5) control of acid gases; (6) NO x abatement; and (7) gas cooling and reheating as required to perform these functions

  2. Non-destructive control of castings

    International Nuclear Information System (INIS)

    Boutault, J.; Mascre, C.

    1978-01-01

    The object of non-destructive control in foundries is to verify the metal structure, the absence of unacceptable discontinuity, total tightness, etc. This leads to a range of very varied controls according to the importance of the series, the quality level required by the specifications, the nature of the alloy. The originality of the solutions which are imperative for castings is shown through examples: casting of high quality complex forms in short series; very thick unit parts; very large series of parts requiring on efficient automation of non-destructive control. Lastly the publishing of testing methods and interpretating rules, which are the base of a friendly understanding between constructors and founders are recalled [fr

  3. 32 CFR 644.494 - Donation, abandonment or destruction.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Donation, abandonment or destruction. 644.494 Section 644.494 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) REAL... Land) § 644.494 Donation, abandonment or destruction. (a) General. Improvements may be abandoned...

  4. Mechanisms of immune red cell destruction, and red cell compatibility testing

    International Nuclear Information System (INIS)

    Garratty, G.

    1983-01-01

    The immune destruction of red cells can occur as a complement-mediated intravascular process, or extravascularly, where the red cells are destroyed by macrophages following interaction with cell-bound IgG1, IgG3, and/or C3b. Many of the factors that affect this in vivo destruction are not taken into account during in vitro pretransfusion compatibility testing. At present, even by use of more elaborate tests, it is difficult to accurately predict the fate of a transfused unit of blood. By using some simple information, such as antibody specificity and thermal range, it is sometimes possible to predict the outcome of transfusing a unit of blood that is incompatible in vitro. At other times it may be necessary to utilize 51 Cr-labeled red cells to determine the risk of transfusing such units. Because of the paucity of reported clinical correlations, macrophage/monocyte monolayer assays are of little practical value at present

  5. Seeking Information after the 2010 Haiti Earthquake: A Case Study in Mass-Fatality Management

    Science.gov (United States)

    Gupta, Kailash

    2013-01-01

    The 2010 earthquake in Haiti, which killed an estimated 316,000 people, offered many lessons in mass-fatality management (MFM). The dissertation defined MFM in seeking information and in recovery, preservation, identification, and disposition of human remains. Specifically, it examined how mass fatalities were managed in Haiti, how affected…

  6. Elevance of PCDD/PCDF formation for the evaluation of POPs destruction technologies. PCB destruction over a TiO2-based V2O5-WO3 catalyst

    Energy Technology Data Exchange (ETDEWEB)

    Weber, R. [Tuebingen Univ. (Germany)

    2004-09-15

    PCDDs/PCDFs and PCBs in off-gas from municipal waste incinerators. At higher temperatures, the catalyst can also be used for POPs (and VOC) destruction. In this respect Hagenmaier investigated different oxidation catalysts for PCB destruction efficiency and found superior destruction properties for the TiO2-based V{sub 2}O{sub 5}-WO{sub 3} catalyst. PCB destruction exhibits a special challenge because they are PCDF precursors and n easily be oxidised into the more toxic PCDFs. Therefore, the formation of PCDDs/PCDFs during destruction of PCBs (POPs) is one important criterion for the evaluation of a PCB (POPs) destruction technology. The relevance of PCDF formation during destruction of PCBs was demonstrated e.g. for the supercritical water oxidation technology (SCWO), a technology listed in the highest rank of non-combustion technologies from the United Nations Environmental Programme (UNEP) and the United Nations Industrial Development Organization (UNIDO), where PCDFs were formed in the %-range. Therefore the present study evaluates the relevance of PCDF formation during catalytic destruction of PCBs on a TiO{sub 2}-based V{sub 2}O{sub 5}-WO{sub 3} catalyst. The study aims to give an example of how an assessment of PCDF formation as a function of operation conditions for PCB (POPs) destruction might be performed for the evaluation of a PCB (POPs) destruction technology. Further, the results demonstrate that for the catalytic oxidation over TiO{sub 2}-based V{sub 2}O{sub 5}-WO{sub 3} catalyst, the problem of PCDF formation can be overcome.

  7. Manifestations of Indirect Self-Destructiveness and Dimensions of Emotional Intelligence.

    Science.gov (United States)

    Tsirigotis, Konstantinos; Łuczak, Joanna

    2016-09-01

    While indirect self-destructiveness exerts a rather negative influence on the life and psychological and social functioning of the individual, emotional intelligence may have a favourable effect. The aim of this study has been to explore possible relationships between manifestations of indirect self-destructiveness and dimensions of emotional intelligence. A population of 260 individuals (130 females and 130 males) aged 20-30 (mean age of 24.5) was studied by using the Polish version of the Chronic Self-Destructiveness Scale and INTE, i.e., the Polish version of the Assessing Emotions Scale. Manifestations of indirect self-destructiveness show many significant correlations with variables of the INTE, and those correlations are negative. Generally, it can be said that low emotional intelligence is associated with poor psychosocial and social functioning, which, in turn, is associated with indirect self-destructiveness and its manifestations. It seems advisable to use emotional intelligence in the prophylactic and therapeutic work with individuals suffering from various types of disorders, especially the syndrome of indirect self-destructiveness.

  8. Non-destructive testing of electronic parts

    International Nuclear Information System (INIS)

    Widenhorn, G.

    1980-01-01

    The requirements on quality, safety, faultlessness and reliability of electric components increase because of the high complexity of the appliances in which they are used. By means of examples a survey is given on the common non-destructive testing methods, testing operation and evaluation of test results on electric components which must meet in their application high requirements on quality and reliability. Defective components, especially those with hidden failures are sorted out by non-destructive testing and the failure frequency of the appliances and plants in testing and operation is greatly reduced. (orig.) [de

  9. European Non Destructive Examination Forum (ENDEF)

    International Nuclear Information System (INIS)

    Deffrennes, M.; Engl, G.; Estorff, U. von

    1998-01-01

    Non destructive examination (NDE) during fabrication, Pre-service inspection (PSI) and In service inspection (ISI) are considered key issues for the safe use of nuclear energy. They are important elements of plant lifetime management which is a critical item in decision making on nuclear policies. The European non destructive examination forum (ENDEF) founded by European Commission provides a platform for open discussion between representatives of the European industries with the purpose to establish cooperation between EU, Central and Eastern European Countries and New Independent States in the field of NDE and ISI

  10. Microwave Metamaterial Absorber for Non-Destructive Sensing Applications of Grain

    Directory of Open Access Journals (Sweden)

    Yin Zhang

    2018-06-01

    Full Text Available In this work, we propose a metamaterial absorber at microwave frequencies with significant sensitivity and non-destructive sensing capability for grain samples. This absorber is composed of cross-resonators periodically arranged on an ultrathin substrate, a sensing layer filled with grain samples, and a metal ground. The cross-resonator array is fabricated using the printed circuit board process on an FR-4 board. The performance of the proposed metamaterial is demonstrated with both full-wave simulation and measurement results, and the working mechanism is revealed through multi-reflection interference theory. It can serve as a non-contact sensor for food quality control such as adulteration, variety, etc. by detecting shifts in the resonant frequencies. As a direct application, it is shown that the resonant frequency displays a significant blue shift from 7.11 GHz to 7.52 GHz when the mass fraction of stale rice in the mixture of fresh and stale rice is changed from 0% to 100%. In addition, the absorber shows a distinct difference in the resonant absorption frequency for different varieties of grain, which also makes it a candidate for a grain classification sensor. The presented scheme could open up opportunities for microwave metamaterial absorbers to be applied as efficient sensors in the non-destructive evaluation of agricultural and food product quality.

  11. Hamster and Murine Models of Severe Destructive Lyme Arthritis

    Science.gov (United States)

    Munson, Erik; Nardelli, Dean T.; Du Chateau, Brian K.; Callister, Steven M.; Schell, Ronald F.

    2012-01-01

    Arthritis is a frequent complication of infection in humans with Borrelia burgdorferi. Weeks to months following the onset of Lyme borreliosis, a histopathological reaction characteristic of synovitis including bone, joint, muscle, or tendon pain may occur. A subpopulation of patients may progress to a chronic, debilitating arthritis months to years after infection which has been classified as severe destructive Lyme arthritis. This arthritis involves focal bone erosion and destruction of articular cartilage. Hamsters and mice are animal models that have been utilized to study articular manifestations of Lyme borreliosis. Infection of immunocompetent LSH hamsters or C3H mice results in a transient synovitis. However, severe destructive Lyme arthritis can be induced by infecting irradiated hamsters or mice and immunocompetent Borrelia-vaccinated hamsters, mice, and interferon-gamma- (IFN-γ-) deficient mice with viable B. burgdorferi. The hamster model of severe destructive Lyme arthritis facilitates easy assessment of Lyme borreliosis vaccine preparations for deleterious effects while murine models of severe destructive Lyme arthritis allow for investigation of mechanisms of immunopathology. PMID:22461836

  12. Guideline on Isotope Dilution Mass Spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Gaffney, Amy [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-05-19

    Isotope dilution mass spectrometry is used to determine the concentration of an element of interest in a bulk sample. It is a destructive analysis technique that is applicable to a wide range of analytes and bulk sample types. With this method, a known amount of a rare isotope, or ‘spike’, of the element of interest is added to a known amount of sample. The element of interest is chemically purified from the bulk sample, the isotope ratio of the spiked sample is measured by mass spectrometry, and the concentration of the element of interest is calculated from this result. This method is widely used, although a mass spectrometer required for this analysis may be fairly expensive.

  13. Mass spectrometry imaging: a novel technology in rheumatology.

    Science.gov (United States)

    Rocha, Beatriz; Ruiz-Romero, Cristina; Blanco, Francisco J

    2017-01-01

    Mass spectrometry imaging (MSI) is used to determine the relative abundance and spatial distribution of biomolecules such as peptides, proteins, lipids and other organic compounds in tissue sections by their molecular masses. This technique provides a sensitive and label-free approach for high-resolution imaging, and is currently used in an increasing number of biomedical applications such as biomarker discovery, tissue classification and drug monitoring. Owing to technological advances in the past 5 years in diverse MSI strategies, this technology is expected to become a standard tool in clinical practice and provides information complementary to that obtained using existing methods. Given that MSI is able to extract mass-spectral signatures from pathological tissue samples, this technique provides a novel platform to study joint-related tissues affected by rheumatic diseases. In rheumatology, MSI has been performed on articular cartilage, synovium and bone to increase the understanding of articular destruction and to characterize diagnostic and prognostic biomarkers for osteoarthritis, rheumatoid arthritis and osteoporosis. In this Review, we provide an overview of MSI technology and of the studies in which joint tissues have been analysed by use of this methodology. This approach might increase knowledge of rheumatic pathologies and ultimately prompt the development of targeted strategies for their management.

  14. Accuracy of Non-Destructive Testing of PBRs to Estimate Fragilities

    Science.gov (United States)

    Brune, J. N.; Brune, R.; Biasi, G. P.; Anooshehpoor, R.; Purvance, M.

    2011-12-01

    Prior studies of Precariously Balanced Rocks (PBRs) have involved various methods of documenting rock shapes and fragilities. These have included non-destructive testing (NDT) methods such as photomodeling, and potentially destructive testing (PDT) such as forced tilt tests. PDT methods usually have the potential of damaging or disturbing the rock or its pedestal so that the PBR usefulness for future generations is compromised. To date we have force-tilt tested approximately 28 PBRs, and of these we believe 7 have been compromised. We suggest here that given other inherent uncertainties in the current methodologies, NDT methods are now sufficiently advanced as to be adequate for the current state of the art use for comparison with Ground Motion Prediction Equations (GMPEs) and seismic hazard maps (SHMs). Here we compare tilt-test static toppling estimates to three non-destructive methods: (1) 3-D photographic modeling (2) profile analysis assuming the rock is 2-D, and (3) expert judgments from photographs. 3-D modeling uses the commercial Photomodeler program and photographs in the field taken from numerous directions around the rock. The output polyhedral shape is analyzed in Matlab determine the center of mass and in Autocad to estimate the static overturning angle alpha. For the 2-D method we chose the photograph in profile looking perpendicular to the estimated direction of toppling. The rock is outlined as a 2-D object in Matlab. Rock dimensions, rocking points, and a vertical reference are supplied by the photo analyst to estimate the center of gravity and static force overturning angles. For the expert opinion method we used additional photographs taken from different directions to improve the estimates of the center of mass and the rocking points. We used 7 rocks for comparisons. The error in estimating tan alpha from 3-D modeling is about 0.05. For 2-D estimates an average error is about 0.1 (?). For expert opinion estimates the error is about 0.06. For

  15. Modelling Mass Casualty Decontamination Systems Informed by Field Exercise Data

    Directory of Open Access Journals (Sweden)

    Richard Amlôt

    2012-10-01

    Full Text Available In the event of a large-scale chemical release in the UK decontamination of ambulant casualties would be undertaken by the Fire and Rescue Service (FRS. The aim of this study was to track the movement of volunteer casualties at two mass decontamination field exercises using passive Radio Frequency Identification tags and detection mats that were placed at pre-defined locations. The exercise data were then used to inform a computer model of the FRS component of the mass decontamination process. Having removed all clothing and having showered, the re-dressing (termed re-robing of casualties was found to be a bottleneck in the mass decontamination process during both exercises. Computer simulations showed that increasing the capacity of each lane of the re-robe section to accommodate 10 rather than five casualties would be optimal in general, but that a capacity of 15 might be required to accommodate vulnerable individuals. If the duration of the shower was decreased from three minutes to one minute then a per lane re-robe capacity of 20 might be necessary to maximise the throughput of casualties. In conclusion, one practical enhancement to the FRS response may be to provide at least one additional re-robe section per mass decontamination unit.

  16. 27 CFR 25.221 - Voluntary destruction of beer.

    Science.gov (United States)

    2010-04-01

    ... beer. 25.221 Section 25.221 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Voluntary Destruction § 25.221 Voluntary destruction of beer. (a) On brewery premises. (1) A brewer may destroy, at the brewery, beer on which the tax has not...

  17. 19 CFR 191.44 - Destruction under Customs supervision.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Destruction under Customs supervision. 191.44 Section 191.44 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) DRAWBACK Rejected Merchandise § 191.44 Destruction under Customs supervision. A claimant may destroy merchandise an...

  18. 19 CFR 191.37 - Destruction under Customs supervision.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Destruction under Customs supervision. 191.37 Section 191.37 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) DRAWBACK Unused Merchandise Drawback § 191.37 Destruction under Customs supervision. A claimant may destroy...

  19. 19 CFR 191.25 - Destruction under Customs supervision.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Destruction under Customs supervision. 191.25 Section 191.25 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) DRAWBACK Manufacturing Drawback § 191.25 Destruction under Customs supervision. A claimant may destroy merchandise...

  20. Prostaglandin PGE2: a possible mechanism for bone destruction in calcinosis circumscripta.

    Science.gov (United States)

    Caniggia, A; Gennari, C; Vattimo, A; Runci, F; Bombardieri, S

    1978-02-28

    A patient showed evident osteolysis in phalanges and heavy periarticular calcium deposits of the fingers, wrists and toes which avidly took up 47Ca. The dense, white, tooth-paste like fluid contained in the periarticular calcium deposits has been studied by two different X-ray diffraction methods, by Ubatuba's bioassay for prostaglandin, by thin layer chromatography and by mass spectrometry. The calcium deposits were hydroxyapatite and prostaglandin PGE2 was detected in them. The bone resorption stimulating activity of PGE2 would be expected to result in increased bone destruction with release of calcium salts and this could be a working hypothesis of the pathogenesis of calcinosis circumscripta.

  1. Toward Mass Customization in the Age of Information: The Case for Open Engineering Systems

    Science.gov (United States)

    Simpson, Timothy W.; Lautenschlager, Uwe; Mistree, Farrokh

    1997-01-01

    In the Industrial Era, manufacturers used "dedicated" engineering systems to mass produce their products. In today's increasingly competitive markets, the trend is toward mass customization, something that becomes increasingly feasible when modern information technologies are used to create open engineering systems. Our focus is on how designers can provide enhanced product flexibility and variety (if not fully customized products) through the development of open engineering systems. After presenting several industrial examples, we anchor our new systems philosophy with two real engineering applications. We believe that manufacturers who adopt open systems will achieve competitive advantage in the Information Age.

  2. Self-Destructive Behavior in People with Dissociative Disorders.

    Science.gov (United States)

    Saxe, Glenn N.; Chawla, Neharika; Van der Kolk, Bessel

    2002-01-01

    Study assesses self-destructive behavior in a group of inpatients who have dissociative disorders compared to those who report few dissociative symptoms. Results reveal that these patients more frequently engage in self-destructive behaviors, use more methods of self-injury, and begin to injure themselves at an earlier age then patients who do not…

  3. Destructive Leadership: The Hatfield and McCoy Feud

    Science.gov (United States)

    Sparks, George; Wolf, Patricia; Zurick, Andryce M.

    2015-01-01

    This paper explores the phenomenon of destructive leadership using the historical case study of the feud between the Hatfields and McCoys. The characteristics of destructive leadership as well as the consequences of this leadership style are reviewed, examined and analyzed. Utilizing a case from history to shine light on a contemporary problem,…

  4. Constructive Deviance, Destructive Deviance and Personality: How do they interrelate?

    OpenAIRE

    Bodankin, Moran; Tziner, Aharon

    2009-01-01

    In recent years deviant behavior in organizations has drawn increasing attention. However, surprisingly little research has focused on constructive rather than destructive deviance. In an attempt to bridge this gap, the present study investigated both constructive and destructive deviance at work and their relationship to employee personality. Using 89 hitech employees, constructive and destructive (interpersonal and organizational) deviance were regressed on the big-five factors of personali...

  5. Advanced non-destructive methods for an efficient service performance

    International Nuclear Information System (INIS)

    Rauschenbach, H.; Clossen-von Lanken Schulz, M.; Oberlin, R.

    2015-01-01

    Due to the power generation industry's desire to decrease outage time and extend inspection intervals for highly stressed turbine parts, advanced and reliable Non-destructive methods were developed by Siemens Non-destructive laboratory. Effective outage performance requires the optimized planning of all outage activities as well as modern Non-destructive examination methods, in order to examine the highly stressed components (turbine rotor, casings, valves, generator rotor) reliably and in short periods of access. This paper describes the experience of Siemens Energy with an ultrasonic Phased Array inspection technique for the inspection of radial entry pinned turbine blade roots. The developed inspection technique allows the ultrasonic inspection of steam turbine blades without blade removal. Furthermore advanced Non-destructive examination methods for joint bolts will be described, which offer a significant reduction of outage duration in comparison to conventional inspection techniques. (authors)

  6. Schumpeter's process of creative destruction and the Scandinavian systems

    DEFF Research Database (Denmark)

    Andersen, Esben Sloth; Dahl, Michael Slavensky; Lundvall, Bengt-Åke

    The paper studies of the process of creative destruction according to Schumpeter's programme of making a 'Theoretical, Historical, and Statistical Analysis of the Capitalist Process'. He had both a Mark I and a Mark II of concept of creative destruction, and they are important for understanding...... the coevolution between economic life and socio-political life. A method for partitioning of evolutionary change into a selection effect and an innovation effect is described, and sketches of the historical experience of Denmark and Sweden are made accordingly. Finally, a statistical study of creative destruction...

  7. Mutual information optimization for mass spectra data alignment.

    Science.gov (United States)

    Zoppis, Italo; Gianazza, Erica; Borsani, Massimiliano; Chinello, Clizia; Mainini, Veronica; Galbusera, Carmen; Ferrarese, Carlo; Galimberti, Gloria; Sorbi, Sandro; Borroni, Barbara; Magni, Fulvio; Antoniotti, Marco; Mauri, Giancarlo

    2012-01-01

    "Signal" alignments play critical roles in many clinical setting. This is the case of mass spectrometry data, an important component of many types of proteomic analysis. A central problem occurs when one needs to integrate (mass spectrometry) data produced by different sources, e.g., different equipment and/or laboratories. In these cases some form of "data integration'" or "data fusion'" may be necessary in order to discard some source specific aspects and improve the ability to perform a classification task such as inferring the "disease classes'" of patients. The need for new high performance data alignments methods is therefore particularly important in these contexts. In this paper we propose an approach based both on an information theory perspective, generally used in a feature construction problem, and on the application of a mathematical programming task (i.e. the weighted bipartite matching problem). We present the results of a competitive analysis of our method against other approaches. The analysis was conducted on data from plasma/ethylenediaminetetraacetic acid (EDTA) of "control" and Alzheimer patients collected from three different hospitals. The results point to a significant performance advantage of our method with respect to the competing ones tested.

  8. Pediatric Myofibroma of the Palate with Ulceration and Bone Destruction

    Directory of Open Access Journals (Sweden)

    Joseph A. Capo

    2016-01-01

    Full Text Available Myofibroma is a rare benign neoplasm occurring in the head and neck, arising primarily in infants and children. Frequently, myofibromas grow rapidly leading to suspicion of malignancy and the potential for overaggressive surgical excision. We aim to report a rare case of myofibroma with ulceration and bone destruction. A nine-year-old female presented with an ulcerated left hard palate mass. Open biopsy was performed with pathology suggestive of myofibroma. A left partial maxillectomy and reconstruction with a buccal advancement flap were performed. Final pathology confirmed the diagnosis of a benign myofibroma. Myofibroma is a rare benign tumor of the head and neck which must be considered in the differential diagnosis by the clinician and the pathologist in order to prevent inappropriate and/or overaggressive treatment.

  9. Assembly, destruction and manipulation of atomic, molecular and complex systems

    International Nuclear Information System (INIS)

    Le Padellec, Arnaud Pierre Frederic

    2003-04-01

    In this report for Accreditation to Supervise Researches (HDR), the author first indicates his professional curriculum (diplomas, teaching activities, responsibilities in the field of education and research, publications), and then proposes a presentation of his scientific works and researches. He notably proposes an overview of the different experimental techniques he implemented: CRYRING storage ring, confluent beams, flow post-discharge with mass spectrometry and Langmuir probe, crossed beams, and so on. He reports works dealing with the manipulation and destruction of atomic, molecular and complex systems: detachment of atomic anions by electronic impact, detachment and dissociation of small carbon aggregates by electronic impact, dissociative recombination, dissociative ionisation and excitation, creation of pairs of ions, manipulation of sodium fluoride aggregates. He finally presents research projects regarding the assembly of molecular and complex systems

  10. An Information Technology Framework for the Development of an Embedded Computer System for the Remote and Non-Destructive Study of Sensitive Archaeology Sites

    Directory of Open Access Journals (Sweden)

    Iliya Georgiev

    2017-04-01

    Full Text Available The paper proposes an information technology framework for the development of an embedded remote system for non-destructive observation and study of sensitive archaeological sites. The overall concept and motivation are described. The general hardware layout and software configuration are presented. The paper concentrates on the implementation of the following informational technology components: (a a geographically unique identification scheme supporting a global key space for a key-value store; (b a common method for octree modeling for spatial geometrical models of the archaeological artifacts, and abstract object representation in the global key space; (c a broadcast of the archaeological information as an Extensible Markup Language (XML stream over the Web for worldwide availability; and (d a set of testing methods increasing the fault tolerance of the system. This framework can serve as a foundation for the development of a complete system for remote archaeological exploration of enclosed archaeological sites like buried churches, tombs, and caves. An archaeological site is opened once upon discovery, the embedded computer system is installed inside upon a robotic platform, equipped with sensors, cameras, and actuators, and the intact site is sealed again. Archaeological research is conducted on a multimedia data stream which is sent remotely from the system and conforms to necessary standards for digital archaeology.

  11. Decision-support information system to manage mass casualty incidents at a level 1 trauma center.

    Science.gov (United States)

    Bar-El, Yaron; Tzafrir, Sara; Tzipori, Idan; Utitz, Liora; Halberthal, Michael; Beyar, Rafael; Reisner, Shimon

    2013-12-01

    Mass casualty incidents are probably the greatest challenge to a hospital. When such an event occurs, hospitals are required to instantly switch from their routine activity to conditions of great uncertainty and confront needs that exceed resources. We describe an information system that was uniquely designed for managing mass casualty events. The web-based system is activated when a mass casualty event is declared; it displays relevant operating procedures, checklists, and a log book. The system automatically or semiautomatically initiates phone calls and public address announcements. It collects real-time data from computerized clinical and administrative systems in the hospital, and presents them to the managing team in a clear graphic display. It also generates periodic reports and summaries of available or scarce resources that are sent to predefined recipients. When the system was tested in a nationwide exercise, it proved to be an invaluable tool for informed decision making in demanding and overwhelming situations such as mass casualty events.

  12. In-situ Non-destructive Studies on Biofouling Processes in Reverse Osmosis Membrane Systems

    KAUST Repository

    Farhat, Nadia

    2016-12-01

    Reverse osmosis (RO) and nanofiltration (NF) membrane systems are high-pressure membrane filtration processes that can produce high quality drinking water. Biofouling, biofilm formation that exceeds a certain threshold, is a major problem in spiral wound RO and NF membrane systems resulting in a decline in membrane performance, produced water quality, and quantity. In practice, detection of biofouling is typically done indirectly through measurements of performance decline. Existing direct biofouling detection methods are mainly destructive, such as membrane autopsies, where biofilm samples can be contaminated, damaged and resulting in biofilm structural changes. The objective of this study was to test whether transparent luminescent planar oxygen sensing optodes, in combination with a simple imaging system, can be used for in-situ, non-destructive biofouling characterization. Aspects of the study were early detection of biofouling, biofilm spatial patterning in spacer filled channels, and the effect of feed cross-flow velocity, and feed flow temperature. Oxygen sensing optode imaging was found suitable for studying biofilm processes and gave detailed spatial and quantitative biofilm development information enabling better understanding of the biofouling development process. The outcome of this study attests the importance of in-situ, non-destructive imaging in acquiring detailed knowledge on biofilm development in membrane systems contributing to the development of effective biofouling control strategies.

  13. Elevance of PCDD/PCDF formation for the evaluation of POPs destruction technologies - Necessity and current status

    Energy Technology Data Exchange (ETDEWEB)

    Weber, R. [Tuebingen Univ. (Germany)

    2004-09-15

    The Stockholm Convention on Persistent Organic Pollutants (POPs) states in Article 6 that POPs waste should be destroyed or disposed of in a way that the POPs content is destroyed or irreversibly transformed. In this context it is critical that the destruction methods used do not create by-products that are themselves POPs. Therefore one important criterion for assessment of a POPs destruction technology is the potential formation of POPs and other toxic by-products, in particular if higher toxic PCDDs/PCDFs are formed and under which operation conditions their formation is relevant (for the respective POPs destruction technology). A detailed evaluation of non-combustion technologies with respect to PCDD/PCDF formation is lacking to date. Most information with respect to PCDD/PCDF formation in non-combustion technologies in the present stage of evaluation is provided by the companies developing or selling the facility. In a laboratory study it was discovered that super critical water oxidation (SCWO), a technology listed from United Nations Environmental Programme UNEP as ''Commercialised Technology with Considerable Experience'' and from United Nations Industrial Development Organization (UNIDO) as ''Emerging and Innovative Technologies'', has the potential to form high concentrations of PCDFs (in the % range) during PCB destruction. Such elevated PCDF formations might occur even at temperatures of potential application. This highlights the necessity of a more rigorous assessment of non-combustion technologies with respect to their PCDD/PCDF formation potential and their actual applicability for PCB/POPs destruction. The present paper provides a critical impulse in this respect, discusses the relevant formation pathways with respect to POPs destruction technologies and proposes a basic framework on how evaluations may be performed.

  14. Modelling, simulation and visualisation for electromagnetic non-destructive testing

    International Nuclear Information System (INIS)

    Ilham Mukriz Zainal Abidin; Abdul Razak Hamzah

    2010-01-01

    This paper reviews the state-of-the art and the recent development of modelling, simulation and visualization for eddy current Non-Destructive Testing (NDT) technique. Simulation and visualization has aid in the design and development of electromagnetic sensors and imaging techniques and systems for Electromagnetic Non-Destructive Testing (ENDT); feature extraction and inverse problems for Quantitative Non-Destructive Testing (QNDT). After reviewing the state-of-the art of electromagnetic modelling and simulation, case studies of Research and Development in eddy current NDT technique via magnetic field mapping and thermography for eddy current distribution are discussed. (author)

  15. Development of destructive methods of burn-up determination and their application on WWER type nuclear fuels

    International Nuclear Information System (INIS)

    Hermann, A.; Stephan, H.; Nebel, D.

    1984-03-01

    Results are described of a cooperation between the Central Institute of Nuclear Research Rossendorf and the Radium Institute 'V.G. Chlopin' Leningrad in the field of destructive burn-up determination. Laboratory methods of burn-up determination using the classical monitors 137 Cs, 106 Ru, 148 Nd and isotopes of heavy metals (U, Pu) as well as the usefulness of 90 Sr, stable isotopes of Ru and Mo as monitors are dealt with. The analysis of the fuel components uranium (spectrophotometry, potentiometric titration, mass-spectrometric isotope dilution) and plutonium (spectrophotometry, coulometric titration, mass- and alpha-spectrometric isotope dilution) is fully described. Possibilities of increasing the reproducibility (automatic adjusting of measurement conditions) and the sensibility (ion impuls counting) of mass-spectrometric measurements are proposed and applied to a precise determination of Am and Cm isotopic composition. The methods have been used for burn-up analysis of spent WWER (especially WWER-440) fuel. (author)

  16. Conceptualizing Chronic Self-Destructiveness.

    Science.gov (United States)

    Kelley, Kathryn

    Self-destructiveness can be viewed in two ways: as performing an act which one knows cognitively is not conducive to one's welfare but nonetheless leads to some pleasurable affect (e.g., overeating, smoking); or not performing an act one knows one should perform but which has some negative affective consequences (e.g., dental checkups, saving…

  17. 9 CFR 2.129 - Confiscation and destruction of animals.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Confiscation and destruction of animals. 2.129 Section 2.129 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE REGULATIONS Miscellaneous § 2.129 Confiscation and destruction of...

  18. A life cycle assessment of destruction of ammunition

    International Nuclear Information System (INIS)

    Alverbro, K.; Bjoerklund, A.; Finnveden, G.; Hochschorner, E.; Haegvall, J.

    2009-01-01

    The Swedish Armed Forces have large stocks of ammunition that were produced at a time when decommissioning was not considered. This ammunition will eventually become obsolete and must be destroyed, preferably with minimal impact on the environment and in a safe way for personnel. The aim of this paper is to make a comparison of the environmental impacts in a life cycle perspective of three different methods of decommissioning/destruction of ammunition, and to identify the environmental advantages and disadvantages of each of these destruction methods: open detonation; static kiln incineration with air pollution control combined with metal recycling, and a combination of incineration with air pollution control, open burning, recovery of some energetic material and metal recycling. Data used are for the specific processes and from established LCA databases. Recycling the materials in the ammunition and minimising the spread of airborne pollutants during incineration were found to be the most important factors affecting the life cycle environmental performance of the compared destruction methods. Open detonation with or without metal recycling proved to be the overall worst alternative from a life cycle perspective. The results for the static kiln and combination treatment indicate that the kind of ammunition and location of the destruction plant might determine the choice of method, since the environmental impacts from these methods are of little difference in the case of this specific grenade. Different methods for destruction of ammunition have previously been discussed from a risk and safety perspective. This is however to our knowledge the first study looking specifically on environmentally aspect in a life cycle perspective.

  19. Evaluation of destructive methods for managing decontamination wastes

    International Nuclear Information System (INIS)

    Piciulo, P.L.; Adams, J.W.

    1986-01-01

    Results are discussed of a laboratory evaluation of destructive methods for processing chemical decontamination wastes. Incineration, acid digestion and wet-air oxidation are capable of degrading decontamination reagents and organic ion-exchange resins. The extent of destruction as a function of operating parameters was waste specific. The reagents used in the testing were: EDTA, oxalic acid, citric acid, picolinic acid and LND-101A

  20. Using process instrumentation to obviate destructive examination of canisters of HLW glass

    International Nuclear Information System (INIS)

    Kuhn, W.L.; Slate, S.C.

    1983-01-01

    An important concern of a manufacturer of packages of solidified high-level waste (HLW) is quality assurance of the waste form. The vitrification of HLW as a borosilicate glass is considered, and, based on a reference vitrification process, it is proposed that information from process instrumentation may be used to assure quality without the need for additional information obtained by destructive examining (core drilling) canisters of glass. This follows mainly because models of product performance and process behavior must be previously established in order to confidently select the desired glass formulation, and to have confidence that the process is well enough developed to be installed and operated in a nuclear facility

  1. Destructive and nondestructive methods for controlling nuclear materials for the purpose of safeguards in the CSSR

    International Nuclear Information System (INIS)

    Krivanek, M.; Krtil, J.; Moravec, J.; Pacak, P.; Sus, F.

    1977-01-01

    Central Control Laboratory (CCL) of the Nuclear Research Institute was charged with the control of nuclear materials in CSSR within the framework of the safeguards system. The CCL has been directed by the Department of nuclear safety and safeguards of CAEC according to a long-term plan, elaborated for controlling nuclear material in CSSR. The CCL has mainly been performing independent, rapid, accurate, and reliable analyses of nuclear materials, using destructive as well as non-destructive methods; the analyses of samples taken in MBA's in CSSR are mentioned, concerning the determinations of U, Pu, and Th contents, isotopic compositions of U and Pu, and burn up. The results of the analyses have served for the material and isotopic balances of fissile materials and the control of fuel reprocessing under laboratory conditions. The methods for sampling and sample transport as well as sample treatment before the analysis are described. The experience is given, obtained at CCL during a routine application of chemical methods for highly precise determinations of U, Pu, and Th (titration-based methods), mass-spectrometric determinations of U and Pu (isotopic composition, IDA using 233 U and 242 Pu), and burn-up determinations based on radioactive fissile products (Cs, Ru, Ce) and stable Nd isotopes. Some non-destructive methods for controlling nuclear materials (passive gamma-spectrometry) are discussed

  2. 9 CFR 54.7 - Procedures for destruction of animals.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Procedures for destruction of animals. 54.7 Section 54.7 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT... SCRAPIE Scrapie Indemnification Program § 54.7 Procedures for destruction of animals. (a) Scrapie-positive...

  3. Chronic destructive pulmonary tuberculosis: assessment of disease activity by computed tomography

    Energy Technology Data Exchange (ETDEWEB)

    Nam, Kyung Jin; Jeong, Yeon Joo [Dept. of Radiology, Pusan National Univ. Hospital, Pusan National Univ. School of Medicine and Medical Research Inst., Pusan (Korea, Republic of)], E-mail: jeongyj@pusan.ac.kr; Kim, Yeong Dae; I, Hoseok [Thoracic and Cardiovascular Surgery, Pusan National Univ. Hospital, Pusan National Univ. School of Medicine and Medical Research Inst., Pusan (Korea, Republic of); Kim, Kun-Il; Lee, Jun Woo [Dept. of Radiology, Pusan National Univ. Yangsan Hospital, Pusan National Univ. School of Medicine, Pusan (Korea, Republic of); Park, Hye Kyung [Internal Medicine, and Pusan National Univ. Hospital, Pusan National Univ. School of Medicine and Medical Research Inst., Pusan (Korea, Republic of)

    2012-11-15

    Background Determination of disease activity of chronic destructive pulmonary tuberculosis (TB) on imaging studies can be difficult because several imaging findings due to disease chronicity such as a residual cavity can be misinterpreted as an active disease. Purpose To evaluate computed tomography (CT) findings to predict active disease in patients with chronic destructive pulmonary TB. Material and Methods CT findings of 36 patients with chronic active destructive pulmonary TB and 78 patients with chronic inactive destructive pulmonary TB were reviewed and their patterns of lung lesions were compared. Statistical comparisons were performed using chi-square and Student's T tests for univariate analyses, and a stepwise logistic regression method was used for multivariate analysis. Results Based on univariate analyses, cavitary destruction (P = 0.015), non-branching centrilobular nodules (P < 0.001), tree-in-bud pattern (P < 0.001), airspace nodules (P < 0.001), and cavities in other lobes (P = 0.001) were more frequently seen in chronic active destructive pulmonary TB. A stepwise logistic regression analysis demonstrated that tree-in-bud pattern (odds ratio, 52.3; 95% confidence interval, 6.2-437.2; P < 0.001) were significant CT findings associated with active disease. Conclusion Tree-in-bud pattern were the most characteristic CT findings to predict active disease in patients with chronic destructive pulmonary TB.

  4. Animal Spirits Meets Creative Destruction

    NARCIS (Netherlands)

    Francois, P.; Lloyd-Ellis, H.

    2001-01-01

    We show how a Schumpeterian process of creative destruction can induce coordination in the timing of entrepreneurial activities across diverse sectors of the economy.Consequently, a multi-sector economy, in which sector-specific, productivity improvements are made by independent, profit-seeking

  5. Dynamic Scoring Through Creative Destruction

    NARCIS (Netherlands)

    van Oudheusden, P.

    2012-01-01

    Abstract: We examine the dynamic feedback effects of fiscal policies on the government budget and economy activity in a calibrated general equilibrium framework featuring endogenous growth through creative destruction. For several European countries, we find that making tax incentives with respect

  6. High resolution CT in the investigation of bone destruction in the outer ear

    International Nuclear Information System (INIS)

    Koester, O.; Straehler-Pohl, H.J.; Bonn Univ.

    1986-01-01

    Eleven patients with known malignant tumours of the outer ear and three patients with otitis externa maligna were examined by high resolution CT. CT provided accurate information concerning soft tissue infiltration into the parotid or subtemporal tissues, and of the bony destruction in the mastoid, meatus and tympanic cavity. Absolute differentiation between a malignant tumour and otitis cisterna maligna is not possible, not even by high resolution CT. (orig.) [de

  7. Destructive spondyloarthropathy and radiographic follow-up in hemodialysis patients

    International Nuclear Information System (INIS)

    Orzincolo, C.; Cardona, P.; Bedani, P.L.; Gilli, P.; Scutellari, P.N.; Trotta, F.

    1990-01-01

    Nine patients undergoing regular dialytic treatment for more than 60 months showed clinical and radiologic features of a noninfective and destructive spondyloarthropathy. Typically, radiographs and CT scans revealed narrowing of intervertebral spaces, with destruction or sclerosis of the subchondral bone of the vertebral plate. A radiographic follow-up of the cervical spine was performed in seven patients after a period of 12 months and showed that the bone destruction in DSA is very rapid and progressive. The lower biocompatibility of the cuprophan membranes of dialyzers is probably the factor most responsible for hyperproduction of β 2 -m and subsequently osteoarticular deposition of a new type of amyloidosis. (orig./DG)

  8. Astrophysical S-factor for destructive reactions of lithium-7 in big bang nucleosynthesis

    Energy Technology Data Exchange (ETDEWEB)

    Komatsubara, Tetsuro; Kwon, YoungKwan; Moon, JunYoung; Kim, Yong-Kyun [Rare Isotope Science Project, Institute for Basic Science, Daejeon (Korea, Republic of); Moon, Chang-Bum [Hoseo University, Asan, Chungnam (Korea, Republic of); Ozawa, Akira; Sasa, Kimikazu; Onishi, Takahiro; Yuasa, Toshiaki; Okada, Shunsuke; Saito, Yuta [Division of Physics, University of Tsukuba, Tsukuba, Ibaraki (Japan); Hayakawa, Takehito; Shizuma, Toshiyuki [Japan Atomic Energy Agency, Shirakata Shirane, Tokai, Ibaraki (Japan); Kubono, Shigeru [RIKEN, Hirosawa, Wako, Saitama (Japan); Kusakabe, Motohiko [School of Liberal Arts and Science, Korea Aerospace University (Korea, Republic of); Kajino, Toshitaka [National Astronomical Observatory, Osawa, Mitaka, Tokyo (Japan)

    2014-05-02

    One of the most prominent success with the Big Bang models is the precise reproduction of mass abundance ratio for {sup 4}He. In spite of the success, abundances of lithium isotopes are still inconsistent between observations and their calculated results, which is known as lithium abundance problem. Since the calculations were based on the experimental reaction data together with theoretical estimations, more precise experimental measurements may improve the knowledge of the Big Bang nucleosynthesis. As one of the destruction process of lithium-7, we have performed measurements for the reaction cross sections of the {sup 7}L({sup 3}He,p){sup 9}Be reaction.

  9. Destructiveness criteria for seismic risk evaluation of nuclear power plant

    International Nuclear Information System (INIS)

    Saragoni, G.R.

    1995-01-01

    Two criteria of destructiveness for seismic risk evaluation of nuclear power plant are presented. The first one is a simple linear criterion that allows to compute average response spectra in terms of earthquake accelerogram characteristics. The second defines the destructiveness potential factor P D which measures the capacity of earthquake to produce nonlinear damage. This second criterion that shows large differences of destructiveness capacity for earthquake accelerograms of different seismic environment, specially between subductive and transcursive, is strongly recommended. (author). 8 refs., 1 fig. 1 tab

  10. "Cold combustion" as a new method of toxic waste destruction

    Directory of Open Access Journals (Sweden)

    Екатерина Юрьевна Ткаченко

    2015-05-01

    Full Text Available This article describes a promising new method for the destruction of toxic industrial waste, obsolete pesticides and military poisons and explosives. The proposed method can be used to create mobile modular units that will produce the destruction of the "field", to clean the soil and water containing low concentrations of a pollutant, to solve the problem of disposal of explosives, which is often accompanied by the destruction of uncontrolled detonation. The proposed method is environmentally friendly, using ice as the working body

  11. Nurses' perceptions of conflict as constructive or destructive.

    Science.gov (United States)

    Kim, Wonsun Sunny; Nicotera, Anne M; McNulty, Julie

    2015-09-01

    The aim of this study was to examine nurses' perceptions of constructive and destructive conflicts and their management among nurses. Conflict among nurses is common and has been associated with lack of collaboration, lack of communication and disruptive behaviour, with the potential to have negative impact teamwork. However, unlike the broader social science literature, positive views of conflict are scarce in the nursing literature. Given the various functions of conflict and the high stakes of ineffective conflict management in nursing, it is necessary to examine how nurses understand both sides of conflict: constructive and destructive. A qualitative descriptive design. Data were collected from 34 full time nurses as part of a conflict skills training course offered over 6 months beginning in October 2009. Each participant was asked to write a weekly journal about conflicts in his/her work place. Data yielded 163 entries (82 classified as constructive and 81 as destructive). Results showed that quality patient care and cooperative communication contributed to the perception that conflict is constructive in nature. The central underlying themes in nurses' perceptions of destructive conflict were time constraints, role conflict and power differences that are not managed through communication. This article helps to identify nursing perceptions of constructive and destructive conflict and to understand complexities nurses face during their interactions with other nurses, physicians and patients. The insight that constructive views are related to constructive processes provides an excellent opportunity for an educational intervention, so that we can educate nurses to analyse problems and learn how to manage conflict with effective collaborative processes. © 2015 John Wiley & Sons Ltd.

  12. Radiation induced destruction of thebaine, papaverine and noscapine in methanol

    International Nuclear Information System (INIS)

    Kantoğlu, Ömer; Ergun, Ece

    2016-01-01

    The presence of methanol decreases the efficiency of radiation-induced decomposition of alkaloids in wastewater. Intermediate products were observed before the complete degradation of irradiated alkaloids. In order to identify the structure of the by-products and the formation pathway, thebaine, papaverine and noscapine solutions were prepared in pure methanol and irradiated using a 60 Co gamma cell at absorbed doses of 0, 1, 3, 5, 7, 10, 30, 50 and 80 kGy. The dose-dependent alkaloid degradation and by-product formation were monitored by ESI mass spectrometer. Molecular structures of the by-products and reaction pathways were proposed. Oxygenated and methoxy group containing organic compounds was observed in the mass spectra of irradiated alkaloids. At initial dose values oxygenated by-products were formed due to the presence of dissolved oxygen in solutions. After the consumption of dissolved oxygen with radicals, the main mechanism was addition of solvent radicals to alkaloid structure. However, it was determined that alkaloids and by-products were completely degraded at doses higher than 50 kGy. The G-value and degradation efficiency of alkaloids were also evaluated. - Highlights: • Oxygenated and methoxy group containing by-products were observed in the mass spectra. • The addition of methanol radiolysis products to alkaloid structure was suggested. • Intermediate products were decomposed at doses above 50 kGy. • The destruction efficiency and degradation G-value of alkaloids were calculated.

  13. Total destruction of PCB transformers

    International Nuclear Information System (INIS)

    Myers, D.S.

    1991-01-01

    This paper reports that if elimination of PCB liability, including lingering liabilities, is the goal, then landfilling cannot be and option. The law is clear that the generator of PCB waste is responsible for that waste until this destruction. Landfilling is not destruction. Retrofilling as askarel units will not get rid of all PCB liabilities, either. Askarel retrofilling can only make this claim when it can give a lifetime guaranty of no detectable PCBs. States like Washington and California regulate, as hazardous waste, fluids which contain greater than 2 and 5 ppm PCB, respectively. There is no guarantee that your state will not so regulate PCBs in the future or that the federal laws might tighten up. Therefore, replacement and disposal by Resource Recovery constitutes the only lifetime guarantee on the market that the PCBs in your askarel transformers will never come back to haunt you

  14. Experience destructive therapy anogenital warts

    Directory of Open Access Journals (Sweden)

    M. R. Rahmatulina

    2016-01-01

    Full Text Available Objective. To assess the efficiency and tolerability of the Mardil Zinc Max, solution for external application, in topical therapy of patients with anogenital warts. Materials and methods. The study involved 58 women and 12 men at the age of 18 to 57 years old, suffering from anogenital warts. the diagnosis was confirmed by identification of human papillomavirus by the polymerase chain reaction in real time. All the patients were treated by the chemical destruction of anogenital warts with the 1.5% solution of zinc chloropropionate in 50% 2-chloropropionic acid (Mardil Zinc Max by a single application of the solution on the pathological eruptions. The results of treatment were assessed in 2 weeks, in 1, 3, 6 and 9 months after the destructive therapy. Results. In 2 weeks 62 (88.6% patients showed a clinical cure with complete tissue regeneration in the lesions, in 8 (11,4% cases in areas of the preparation erosions were visualized in the epithelialization phase, and they completely resolved within 1 week. recurrences of anogenital warts were detected in 1 (1,4% patient in the observation period up to 3 months and in 2 (2,8% patients during 9 months after carrying out the destruction. Adverse drug events have not been identified in the course of therapy and follow-up. Conclusions. As a result of the treatment of anogenital warts with the Mardil Zinc Max high rate of performance and security was set (100%, as well as the low percentage (4,2% of development of relapses.

  15. 50 CFR 28.43 - Destruction of dogs and cats.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Destruction of dogs and cats. 28.43 Section 28.43 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR... VIOLATIONS OF PARTS 25, 26, AND 27 Impoundment Procedures § 28.43 Destruction of dogs and cats. Dogs and cats...

  16. Non-destructive measurement methods for large scale gaseous diffusion process equipment

    International Nuclear Information System (INIS)

    Mayer, R.L.; Hagenauer, R.C.; McGinnis, B.R.

    1994-01-01

    Two measurement methods have been developed to measure non-destructively uranium hold-up in gaseous diffusion plants. These methods include passive neutron and passive γ ray measurements. An additional method, high resolution γ ray spectroscopy, provides supplementary information about additional γ ray emitting isotopes, γ ray correction factors, 235 U/ 234 U ratios and 235 U enrichment. Many of these methods can be used as a general purpose measurement technique for large containers of uranium. Measurement applications for these methods include uranium hold-up, waste measurements, criticality safety and nuclear accountability

  17. Hybrid wars’ information component

    Directory of Open Access Journals (Sweden)

    T. A. Nevskaya

    2015-01-01

    Full Text Available The war of the new generation - hybrid war, the information component which is directed not so much on the direct destruction of the enemy, how to achieve the goals without warfare. Fighting in the information field is no less important than immediate military action.

  18. Thermographic and potentiometric research on thermal destruction

    Energy Technology Data Exchange (ETDEWEB)

    Mel' nichuk, A.Yu.; Fialkov, B.S.; Zazharov, A.G.; Lemke, E.R.

    1981-03-01

    Analyses of thermal effects and electric potential during the thermal destruction of various types of solid fuels were conducted by means of thermography and electron-ion phenomena determination. The characteristics of coals of various ranks, and of graphite and coke are presented. Thermograms and potential curves are graphed. The studies showed a certain correlation between the thermograms and potential change curves of the solid phase. The character of the potential curves and intensity of their peaks depends on the type of sample and makes an evaluation on the charged state of the products of destruction possible. (8 refs.) (In Russian)

  19. System and method for non-destructive evaluation of surface characteristics of a magnetic material

    Science.gov (United States)

    Jiles, David C.; Sipahi, Levent B.

    1994-05-17

    A system and a related method for non-destructive evaluation of the surface characteristics of a magnetic material. The sample is excited by an alternating magnetic field. The field frequency, amplitude and offset are controlled according to a predetermined protocol. The Barkhausen response of the sample is detected for the various fields and offsets and is analyzed. The system produces information relating to the frequency content, the amplitude content, the average or RMS energy content, as well as count rate information, for each of the Barkhausen responses at each of the excitation levels applied during the protocol. That information provides a contiguous body of data, heretofore unavailable, which can be analyzed to deduce information about the surface characteristics of the material at various depths below the surface.

  20. Maternal exposure to hurricane destruction and fetal mortality.

    Science.gov (United States)

    Zahran, Sammy; Breunig, Ian M; Link, Bruce G; Snodgrass, Jeffrey G; Weiler, Stephan; Mielke, Howard W

    2014-08-01

    The majority of research documenting the public health impacts of natural disasters focuses on the well-being of adults and their living children. Negative effects may also occur in the unborn, exposed to disaster stressors when critical organ systems are developing and when the consequences of exposure are large. We exploit spatial and temporal variation in hurricane behaviour as a quasi-experimental design to assess whether fetal death is dose-responsive in the extent of hurricane damage. Data on births and fetal deaths are merged with Parish-level housing wreckage data. Fetal outcomes are regressed on housing wreckage adjusting for the maternal, fetal, placental and other risk factors. The average causal effect of maternal exposure to hurricane destruction is captured by difference-in-differences analyses. The adjusted odds of fetal death are 1.40 (1.07-1.83) and 2.37 (1.684-3.327) times higher in parishes suffering 10-50% and >50% wreckage to housing stock, respectively. For every 1% increase in the destruction of housing stock, we observe a 1.7% (1.1-2.4%) increase in fetal death. Of the 410 officially recorded fetal deaths in these parishes, between 117 and 205 may be attributable to hurricane destruction and postdisaster disorder. The estimated fetal death toll is 17.4-30.6% of the human death toll. The destruction caused by Hurricanes Katrina and Rita imposed significant measurable losses in terms of fetal death. Postdisaster migratory dynamics suggest that the reported effects of maternal exposure to hurricane destruction on fetal death may be conservative. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  1. Policy of Kyrgyz Republic in the field of weapons of mass destruction nonproliferation

    International Nuclear Information System (INIS)

    Duisheeva, Zh.Z.

    2010-01-01

    Full text: Kyrgyz Republic is principle and sequential member of accepting effective international measures, directed to active prevention to weapons of mass destruction (WMD) proliferation, its components and means of delivery. Commitment to prevention policy and WMD nonproliferation is one of basic principles of foreign and domestic policy of Kyrgyz Republic. The real measure against WMD proliferation and relating to its production technologies of military, special and dual use is international export control based on national systems of export control including smoothly running national system of account for, control and physical protection of arm materials. Currently juridical basis of export control system in Kyrgyz Republic is actively developing. In 2003 the Law of Kyrgyz Republic On export control, based on principles and norms of international law in the field of export control was adopted. The Law On export control determines basic principles of state policy, legal activity basis of state management and participants of foreign-economic activity in the field of export control, as well as defines their rights, obligations and responsibilities in this field. Also in the law, the requirements of international treaties realization in the field of WMD nonproliferation and means of their delivery, signed by Kyrgyzstan, is defined as one of national systems goals of export control. In article 13, Law On export control it is defined that international cooperation in the field of export control by means of efforts coordination and cooperation with foreign states on prevention of WMD nonproliferation, means of their delivery and technologies on their creation; participation in international regimes of export control and international forums, as well as carrying out negotiations, consultations with foreign states, bilateral information exchange and realization of joint programs and other events in the field of export control on bilateral and multilateral basis. By

  2. The use of non-destructive testing in COSY, an ultrahigh vacuum research plant of KFA, Juelich

    International Nuclear Information System (INIS)

    Schroeder, G.; Pauly, F.; Stechemesser, H.

    1993-01-01

    This report shows that the development, the construction and the later successful operation of ultra-high vacuum (UHV) plants in the pressure range of ≤ 10 -10 mbar is not possible without the use of highly sensitive non-destructive testing. Using the example of the large scale precision plant COSY, it is shown that only by observing basic UHV manufacturing conditions and the thorough use of the helium leak-finding technique and mass-spectrometric residual gas analysis can the required leakage rates ( -10 mbar. 1 . s -1 ) and surface cleanliness be achieved. (orig.) [de

  3. 2DB: a Proteomics database for storage, analysis, presentation, and retrieval of information from mass spectrometric experiments.

    Science.gov (United States)

    Allmer, Jens; Kuhlgert, Sebastian; Hippler, Michael

    2008-07-07

    The amount of information stemming from proteomics experiments involving (multi dimensional) separation techniques, mass spectrometric analysis, and computational analysis is ever-increasing. Data from such an experimental workflow needs to be captured, related and analyzed. Biological experiments within this scope produce heterogenic data ranging from pictures of one or two-dimensional protein maps and spectra recorded by tandem mass spectrometry to text-based identifications made by algorithms which analyze these spectra. Additionally, peptide and corresponding protein information needs to be displayed. In order to handle the large amount of data from computational processing of mass spectrometric experiments, automatic import scripts are available and the necessity for manual input to the database has been minimized. Information is in a generic format which abstracts from specific software tools typically used in such an experimental workflow. The software is therefore capable of storing and cross analysing results from many algorithms. A novel feature and a focus of this database is to facilitate protein identification by using peptides identified from mass spectrometry and link this information directly to respective protein maps. Additionally, our application employs spectral counting for quantitative presentation of the data. All information can be linked to hot spots on images to place the results into an experimental context. A summary of identified proteins, containing all relevant information per hot spot, is automatically generated, usually upon either a change in the underlying protein models or due to newly imported identifications. The supporting information for this report can be accessed in multiple ways using the user interface provided by the application. We present a proteomics database which aims to greatly reduce evaluation time of results from mass spectrometric experiments and enhance result quality by allowing consistent data handling

  4. 2DB: a Proteomics database for storage, analysis, presentation, and retrieval of information from mass spectrometric experiments

    Directory of Open Access Journals (Sweden)

    Hippler Michael

    2008-07-01

    Full Text Available Abstract Background The amount of information stemming from proteomics experiments involving (multi dimensional separation techniques, mass spectrometric analysis, and computational analysis is ever-increasing. Data from such an experimental workflow needs to be captured, related and analyzed. Biological experiments within this scope produce heterogenic data ranging from pictures of one or two-dimensional protein maps and spectra recorded by tandem mass spectrometry to text-based identifications made by algorithms which analyze these spectra. Additionally, peptide and corresponding protein information needs to be displayed. Results In order to handle the large amount of data from computational processing of mass spectrometric experiments, automatic import scripts are available and the necessity for manual input to the database has been minimized. Information is in a generic format which abstracts from specific software tools typically used in such an experimental workflow. The software is therefore capable of storing and cross analysing results from many algorithms. A novel feature and a focus of this database is to facilitate protein identification by using peptides identified from mass spectrometry and link this information directly to respective protein maps. Additionally, our application employs spectral counting for quantitative presentation of the data. All information can be linked to hot spots on images to place the results into an experimental context. A summary of identified proteins, containing all relevant information per hot spot, is automatically generated, usually upon either a change in the underlying protein models or due to newly imported identifications. The supporting information for this report can be accessed in multiple ways using the user interface provided by the application. Conclusion We present a proteomics database which aims to greatly reduce evaluation time of results from mass spectrometric experiments and enhance

  5. Roentgenoendovascular destruction of the adrenals in Icenko-Cushing's diseases

    International Nuclear Information System (INIS)

    Yugrinov, O.G.; Komissarenko, I.V.; Cheban, A.K.; Rybakov, S.I.; Eremenko, V.N.; Makarenko, G.I.; Sheptukha, A.I.; Chernij, Ya.M.

    1986-01-01

    The principle of nonoperative adrenalectomy by means of the destruction of the adrenals with the help of roentgenoendovascular intervention was developed. It was based on a transcatheter transvenous route of delivery of a radiopaque agent which was used to control on X-ray screen mechanical damage of the adrenal structural elements (destruction) at the expense of artificial exceeding of the capacity of its venous bed. Excess of the radiopaque agent was deposited in the paravasal spaces of the adrenal on its entire length. Transcatheter transvenous destruction of the adrenals (TTDA) was performed in 97 patients: unilateral TTDA in 62, bilateral in 35. TTDA is a method of choice in the treatment of Icenko-Cushing's disease, in some patients it is an alternative to surgery

  6. Exergy destruction in ammonia scrubbers

    NARCIS (Netherlands)

    Zisopoulos, Filippos K.; Goot, van der Atze Jan; Boom, Remko M.

    2018-01-01

    A theoretical ammonia scrubbing process by sulfuric acid solution is assessed with the concept of exergy. The exergy destruction of chemical neutralization is mainly (75–94%) due to changes in the chemical exergy of streams and thermal effects from the reaction while mixing effects have a limited

  7. Analysis of a Single Hot Particle by a Combination of Non-Destructive Analytical Methods

    Energy Technology Data Exchange (ETDEWEB)

    Hrnecek, E.; Aldave de las Heras, L.; Bielewski, M.; Carlos, R. [EC JRC Institute for Transuranium Elements, Karlsruhe (Germany); Betti, M. [IAEA Environment Laboratories (Monaco)

    2013-07-15

    Radioactive substances are often released to the environment in the form of particles. The determination of their chemical composition is a key factor in the overall understanding of their environmental behaviour. The aim of this investigation was to identify the source of one single radioactive particle collected from the Irish Sea and to understand its fate in the environment and in human body fluids. As the particle was supposed to be analysed for its dissolution behaviour in humans after ingestion, it was necessary to gain as much information as possible beforehand on the chemical and isotopic composition by means of non-destructive analysis such as SEM, SIMS, {mu}-XRF and {mu}-XANES. In this paper, an overview of the different non-destructive methods applied for the analysis of this particle and the results obtained is given. Additionally, the dissolution behaviour in human digestive solutions is discussed. (author)

  8. Proliferation of massive destruction weapons: fantasy or reality?

    International Nuclear Information System (INIS)

    Duval, M.

    2001-01-01

    This article evaluates the threat of massive destruction weapons (nuclear, chemical, biological) for Europe and recalls the existing safeguards against the different forms of nuclear proliferation: legal (non-proliferation treaty (NPT), comprehensive nuclear test ban treaty (CTBT), fissile material cut off treaty (FMCT) etc..), technical (fabrication of fissile materials, delays). However, all these safeguards can be overcome as proven by the activities of some countries. The situation of proliferation for the other type of massive destruction weapons is presented too. (J.S.)

  9. Early MRI findings of rapidly destructive coxarthrosis

    International Nuclear Information System (INIS)

    Watanabe, Wataru; Itoi, Eiji; Yamada, Shin

    2002-01-01

    Rapidly destructive coxarthrosis (RDC) is known to affect elderly women, but its etiology is unknown. This is the first report to our knowledge, based on a search of the English literature, that reveals the entire process of hip destruction from the onset to the terminal stage of RDC, in an 80-year-old woman. Radiographic evaluation showed subchondral insufficiency fracture of the femoral head at an early stage of this disease. An MRI examination within a month of the onset of hip pain showed the entire femoral head with low intensity on T1-weighted images and high intensity on T2-weighted images, and a small low-intensity band at the subchondral area of the lateral weight-bearing portion of the head. These findings are consistent with subchondral insufficiency fracture and associated bone marrow edema. The lesion developed into a deep and large erosion at the superolateral portion of the femoral head, the process being observed on both roentgenograms and MRI. These findings were confirmed during total hip arthroplasty. This case suggests that subchondral insufficiency fracture of the femoral head may be a preceding sign of destruction of the femoral head. (orig.)

  10. Non-destructive nuclear forensics of radioactive samples

    Energy Technology Data Exchange (ETDEWEB)

    Rogge, R.B. [Canadian Neutron Beam Centre, Chalk River, ON (Canada); Alexander, Q.; Bentoumi, G.; Dimayuga, F. [Atomic Energy of Canada Limited, Chalk River, ON (Canada); Flacau, R. [Canadian Neutron Beam Centre, Chalk River, ON (Canada); Li, G.; Li, L.; Sur, B. [Atomic Energy of Canada Limited, Chalk River, ON (Canada)

    2014-07-01

    It is a matter of public safety and security to be able to examine suspicious packages of unknown origin. If the package is radioactive and sealed (i.e., the radioactive materials contained in the package, including their chemical and physical forms, are unknown), there is a significant risk on how to handle the package and eventually safely dispose of its contents. Within the context of nuclear security, nuclear forensics helps address the key issue of identifying the nature and origin of radioactive and nuclear material in order to improve physical protection measures and prevent future theft or diversion of these materials. Nuclear forensics utilizes analytical techniques, destructive and non-destructive, developed for applications related to nuclear fuel cycles. This paper demonstrates the non-destructive examination techniques that can be used to inspect encapsulated radioactive samples. Results of γ spectroscopy, X-ray spectroscopy, neutron imaging, neutron diffraction, and delayed neutron analysis as applied to an examination of sealed capsules containing unknown radioactive materials are presented. The paper also highlights the value of these techniques to the overall nuclear forensic investigation to determine the origin of these unknown radioactive materials. (author)

  11. Recent canadian experience in chemical warfare agent destruction. An overview

    Energy Technology Data Exchange (ETDEWEB)

    McAndless, J.M.

    1995-09-01

    A Canadian chemical warfare agent destruction project (Swiftsure) was recently completed in which stockpiles of aged mustard, lewisite, nerve agents and contaminated scrap metal were incinerated or chemically neutralized in a safe, environmentally-responsible manner. The project scope, destruction technologies, environmental monitoring and public consultation programs are described.

  12. Human and organisational factors influencing the reliability of non-destructive testing. An international literary survey

    International Nuclear Information System (INIS)

    Kettunen, J.; Norros, L.

    1996-04-01

    The aim of the study is to chart human and organisational factors influencing the reliability of non-destructive testing (NDT). The emphasis will be in ultrasonic testing (UT) and in the planning and execution of in-service inspections during nuclear power plant maintenance outages. Being a literary survey this study is mainly based on the foreign and domestic research available on the topic. In consequence, the results presented in this report reflect the ideas of international research community. In addition to this, Finnish nuclear power plant operators (Imatran Voima Oy and Teollisuuden Voima Oy), independent inspection organisations and the Finnish Centre for Radiation and Nuclear Safety have provided us with valuable information on NDT theory and practice. Especially, a kind of 'big picture' of non-destructive testing has been pursued in the study. (6 figs., 2 tabs.)

  13. Chordoma of skull base presenting as nasopharyngeal mass

    Directory of Open Access Journals (Sweden)

    Sant Prakash Kataria

    2013-01-01

    Full Text Available While the nasopharynx is most commonly regarded by the otolaryngologist as a primary site of neoplastic involvement, it is also an avenue of spread of base-of-the-skull tumors presenting as bulging nasopharyngeal masses. Chordoma is a relatively rare tumor of the skull base and sacrum thought to originate from embryonic remnants of the notochord. Chordomas arising from the skull base/clivus are typically locally aggressive with lytic bone destruction. The optimal treatment may be photon/proton radiotherapy alone or combined with a gross total resection, when feasible. We report a case of intracranial chordoma presenting as nasopharyngeal mass.

  14. Inefficient Job Destructions and Training with Hold-up

    DEFF Research Database (Denmark)

    Chéron, Arnaud; Rouland, Benedicte

    2011-01-01

    This paper develops an equilibrium search model with endogenous job destructions and where firms decide at the time of job entry how much to invest in match-specific human capital. We first show that job destruction and training investment decisions are strongly complementary. It is possible...... that there are no firings at equilibrium. Further, training investments are confronted to a hold-up problem making the decentralized equilibrium always inefficient. We show therefore that both training subsidies and firing taxes must be implemented to bring back efficiency....

  15. Recent Canadian experience in chemical warfare agent destruction: An overview. Suffield report No. 626

    Energy Technology Data Exchange (ETDEWEB)

    McAndless, J.M.

    1995-12-31

    This paper reviews a project in which stockpiles of aged mustard (bis-2-chloroethyl sulfide), lewisite (2-chlorovinyl-dichloro arsine), nerve agents, and contaminated scrap metal were incinerated or chemically neutralized in a safe, environmentally responsible manner. Sections of the paper describe the public consultation program conducted prior to destruction operations, the environmental assessment of the destruction projects, the environmental protection plan implemented to eliminate or mitigate risks with respect to the installation and operation of the destruction equipment, the environmental monitoring procedures, the agent destruction operations, and the destruction process performance, including incinerator emissions.

  16. Non destructive nuclear measurements for control and characterization purpose

    International Nuclear Information System (INIS)

    Lyoussi, Abdallah

    2002-01-01

    In this report for accreditation to supervise researches, the author proposes a large and rather precise overview of his research works which dealt with the upstream and downstream parts of the nuclear fuel cycle. After having discussed the different needs associated with non destructive nuclear measurements during the fuel cycle, the author describes his past research activities. In the following parts, he discusses control and characterization methods associated with the upstream and downstream parts of the fuel cycle: fuel density variation measurement, non destructive control of uranium-235 content of enriched uranium ingots, examination of induced photo-fissions in radioactive waste parcels, use of electron accelerator for simultaneous neutron and photon examination, measurement of the spatial distribution of the photonic component from the Mini Linatron, association of non destructive measurement techniques

  17. Cooperation enhanced by habitat destruction in Prisoner's Dilemma Games

    Science.gov (United States)

    Yang, Xiqing; Wang, Wanxiong; Zhang, Feng; Qiao, Hongqiang

    2017-11-01

    The emergence and maintenance of cooperation is a fundamental problem within groups of selfish individuals, whereby we introduce a model of replicator equations based on the Prisoner's Dilemma game. In the present work, the effect of habitat destruction on the evolution of cooperation will be taken into account. Our results show that cooperators can receive the biggest boost for a moderate value of habitat destruction, and more serious habitat destruction will lead to lower levels of cooperation until zero. Moreover, we also reach the conclusion that the cooperation level decreases monotonously with the increasing of the ratio of cooperative cost to benefit but increases monotonously with the increasing of the encounter probability. Our findings can help to further understand the evolution of cooperation under the harsh external environment.

  18. Technology of Rock Destruction by Combined Explosion-Mechanical Load

    Directory of Open Access Journals (Sweden)

    Oleg M. Terentiev

    2017-10-01

    Full Text Available Background. Rock drilling is characterized by an energy capacity of more than 120 kWh/m3. This is due to the fact that about 90 % of the energy is expended on the “preparation” of rocks for destruction. This study proposes to combine explosive and mechanical loads to reduce specific energy consumption of rock destruction. Objective. The aim of the paper is energy effective technology development for rock destruction by combined explosive-mechanical loads. Methods. Analytical studies; regression analysis; math modeling; experimental research; technical and economic analysis. Results. Specific energy decreasing for explosive-mechanical rock drilling by 4–16 % was experimentally proved. Conclusions. As a result of the implementation of explosive-mechanical rock drilling on the created full-sized experimental device, the efficiency coefficient increased from 77 to 80 %.

  19. Distillation, destructive

    Energy Technology Data Exchange (ETDEWEB)

    Walton, G

    1865-05-16

    A retort for the destructive distillation of coal, shale, whereby hydrocarbons are produced, is described. The vertical retort is provided with a charging door, a discharging door, an outlet leading to the condensing plant, an inclined bottom, and a perforated cage to facilitate the escape of the vapor and to regulate the amount of materials operated upon in the retort. The upper part of the cage is conical to deflect the materials fed in by the door and the lower part is also slightly conical to facilitate emptying the retort. The bottom may incline from both back and front, and also from the sides to the center. The apparatus is heated from below, and the flues pass all round the lower part of the retort.

  20. 27 CFR 19.315 - Removal or destruction of distilling material.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Removal or destruction of distilling material. 19.315 Section 19.315 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND...) spirits, (2) alcoholic beverages, or (3) vinegar by the vaporizing process; or (c) for destruction. The...

  1. Constraint specification in architecture : a user-oriented approach for mass customization

    NARCIS (Netherlands)

    Niemeijer, R.A.

    2011-01-01

    The last several decades, particularly those after the end of World War II, have seen an increasing industrialization of the housing industry. This was partially driven by the large demand for new houses that resulted from the baby boom and the destruction caused by the war. By adopting mass

  2. Application of digital radiography for the non-destructive characterization of radioactive waste packages

    International Nuclear Information System (INIS)

    Lierse, C.; Goebel, H.; Kaciniel, E.; Buecherl, T.; Krebs, K.

    1995-01-01

    Digital radiography (DR) using gamma-rays is a powerful tool for the non-destructive determination of various parameters which are relevant within the quality control procedure of radioactive waste packages prior to an interim storage or a final disposal. DR provides information about the waste form and the extent of filling in a typical container. It can identify internal structures and defects, gives their geometric dimensions and helps to detect non-declared inner containers, shielding materials etc. From a digital radiographic image the waste matrix homogeneity may be determined and mean attenuation coefficients as well as density values for selected regions of interest can be calculated. This data provides the basis for an appropriate attenuation correction of gamma emission measurements (gamma scanning) and makes a reliable quantification of gamma emitters in waste containers possible. Information from DR measurements are also used for the selection of interesting height positions of the object which are subsequently inspected in more detail by other non-destructive methods, e. g. by transmission computerized tomography (TCT). The present paper gives important technical specifications of an integrated tomography system (ITS) which is used to perform digital radiography as well as transmission/emission computerized tomography (TCT/ECT) on radioactive waste packages. It describes the DR mode and some of its main applications and shows typical examples of radiographs of real radioactive waste drums

  3. Split of personality of leader as reason of mass psychosis: nature and methods of influence on crowd

    Directory of Open Access Journals (Sweden)

    Elena V. Chuikova

    2016-02-01

    Full Text Available In the article the theme of technology and method of influence of leader is examined on mass of people. Features are studied personalities of leader and technology, that subordinate people to his influence. It is technology of chain reaction. But as elements of this chainlet the foreign structures of subconsciousness come forward for personality of leader. Аrchetyp of Shade in consciousness of leader activates analogical archetypes of Shade in consciousness of people with destructives tendencies. These features of influence specify, why character and end-point of such influence are destructive. Thus, only a problem leader not able to control a temper to a full degree, because аrchetyp of Shade owns them, is able on principle of chain reaction to influence on crowd and create a mass psychosis. So, leader with the split of personality, an inferior simply infects archetyp of Shade the personality psychosis mass of weak, weak-willed and simultaneously destructive people with propensity to dissociation of personality. Social layer that easily submits to the leader with a divide consciousness, - it countrymen, that moved in a city and are in a state of disorientation, weak will, are unbred, destructived, without the critical thinking, with a limit thinking.

  4. Determining plutonium mass in spent fuel with non-destructive assay techniques - NGSU research overview and update on 6 NDA techniques

    Energy Technology Data Exchange (ETDEWEB)

    Tobin, Stephen J [Los Alamos National Laboratory; Conlin, Jeremy L [Los Alamos National Laboratory; Evans, Louise G [Los Alamos National Laboratory; Hu, Jianwei [Los Alamos National Laboratory; Blanc, Pauline C [Los Alamos National Laboratory; Lafleur, Adrienne M [Los Alamos National Laboratory; Menlove, Howard O [Los Alamos National Laboratory; Schear, Melissa A [Los Alamos National Laboratory; Swinhoe, Martyn T [Los Alamos National Laboratory; Croft, Stephen [Los Alamos National Laboratory; Fensin, Michael L [Los Alamos National Laboratory; Freeman, Corey R [Los Alamos National Laboratory; Koehler, William E [Los Alamos National Laboratory; Mozin, V [Los Alamos National Laboratory; Sandoval, N P [Los Alamos National Laboratory; Lee, T H [KAERI; Cambell, L W [PNNL; Cheatham, J R [ORNL; Gesh, C J [PNNL; Hunt, A [IDAHO STATE UNIV; Ludewigt, B A [LBNL; Smith, L E [PNNL; Sterbentz, J [INL

    2010-09-15

    This poster is one of two complementary posters. The Next Generation Safeguards Initiative (NGSI) of the U.S. DOE has initiated a multi-lab/university collaboration to quantify the plutonium (Pu) mass in, and detect the diversion of pins from, spent nuclear fuel assemblies with non-destructive assay (NDA). This research effort has the goal of quantifying the capability of 14 NDA techniques as well as training a future generation of safeguards practitioners. By November of 2010, we will be 1.5 years into the first phase (2.5 years) of work. This first phase involves primarily Monte Carlo modelling while the second phase (also 2.5 years) will focus on experimental work. The goal of phase one is to quantify the detection capability of the various techniques for the benefit of safeguard technology developers, regulators, and policy makers as well as to determine what integrated techniques merit experimental work, We are considering a wide range of possible technologies since our research horizon is longer term than the focus of most regulator bodies. The capability of all of the NDA techniques will be determined for a library of 64 17 x 17 PWR assemblies [burnups (15, 30, 45, 60 GWd/tU), initial enrichments (2, 3, 4, 5%) and cooling times (1, 5, 20, 80 years)]. The burnup and cooling time were simulated with each fuel pin being comprised of four radial regions. In this paper an overview of the purpose will be given as well as a technical update on the following 6 neutron techniques: {sup 252}Cf Interrogation with Prompt Neutron Detection, Delayed Neutrons, Differential Die-Away, Differential Die-Away Self-Interrogation, Passive Neutron Albedo Reactivity, Self-Integration Neutron Resonance Densitometry. The technical update will quantify the anticipated performance of each technique for the 64 assemblies of the spent fuel library.

  5. Determining plutonium mass in spent fuel with non-destructive assay techniques - NGSI research overview and update on 6 NDA techniques

    International Nuclear Information System (INIS)

    Tobin, Stephen J.; Conlin, Jeremy L.; Evans, Louise G.; Hu, Kianwei; Blanc, P.C.; Lafleur, Am; Menlove, H.O.; Schear, M.A.; Swinhoe, M.T.; Croft, S.; Fensin, M.L.; Freeman, C.R.; Koehler, W.E.; Mozin, V.; Sandoval, N.P.; Lee, T.H.; Cambell, L.W.; Cheatham, J.R.; Gesh, C.J.; Hunt, A.; Ludewigt, B.A.; Smith, L.E.; Sterbentz, J.

    2010-01-01

    This poster is one of two complementary posters. The Next Generation Safeguards Initiative (NGSI) of the U.S. DOE has initiated a multi-lab/university collaboration to quantify the plutonium (Pu) mass in, and detect the diversion of pins from, spent nuclear fuel assemblies with non-destructive assay (NDA). This research effort has the goal of quantifying the capability of 14 NDA techniques as well as training a future generation of safeguards practitioners. By November of 2010, we will be 1.5 years into the first phase (2.5 years) of work. This first phase involves primarily Monte Carlo modelling while the second phase (also 2.5 years) will focus on experimental work. The goal of phase one is to quantify the detection capability of the various techniques for the benefit of safeguard technology developers, regulators, and policy makers as well as to determine what integrated techniques merit experimental work, We are considering a wide range of possible technologies since our research horizon is longer term than the focus of most regulator bodies. The capability of all of the NDA techniques will be determined for a library of 64 17 x 17 PWR assemblies (burnups (15, 30, 45, 60 GWd/tU), initial enrichments (2, 3, 4, 5%) and cooling times (1, 5, 20, 80 years)). The burnup and cooling time were simulated with each fuel pin being comprised of four radial regions. In this paper an overview of the purpose will be given as well as a technical update on the following 6 neutron techniques: 252 Cf Interrogation with Prompt Neutron Detection, Delayed Neutrons, Differential Die-Away, Differential Die-Away Self-Interrogation, Passive Neutron Albedo Reactivity, Self-Integration Neutron Resonance Densitometry. The technical update will quantify the anticipated performance of each technique for the 64 assemblies of the spent fuel library.

  6. Destructive distillation under pressure

    Energy Technology Data Exchange (ETDEWEB)

    1932-09-08

    A process of destructive distillation of distillable carbonaceous material under pressure is described, consisting of regulating the temperature by introducing the carbonaceous materials to a point where the reaction of hydrogenation has begun but has not stopped, by placing it in indirect heat-exchange with a cooling agent at a critical temperature below the reaction temperature, the agent being under pressure and introduced in the liquid state. Water is used as the cooling agent.

  7. Non-destructive testing and evaluation for structural integrity

    International Nuclear Information System (INIS)

    Baldev Raj; Jayakumar, T.; Rao, B.P.C.

    1995-01-01

    In this paper, a brief description of the physical concepts of non-destructive evaluation (NDE) methods and the physical/derived parameters that are used for assessing defects, stresses and microstructures are given. A few case studies highlighting the importance of non-destructive testing and evaluation for structural integrity assessment are also discussed based on the investigations carried out. Emerging concepts like intelligent processing of materials, expert systems, neural networks, use of multisensors with fusion of data and exploitation of signal analysis and imaging approaches are also addressed in this paper. (author). 92 refs., 1 tab

  8. Mediated electrochemical hazardous waste destruction

    International Nuclear Information System (INIS)

    Hickman, R.G.; Farmer, J.C.; Wang, F.T.

    1992-03-01

    There are few permitted processes for mixed waste (radioactive plus chemically hazardous) treatment. We are developing an electrochemical process, based upon mediated electrochemical oxidation (MEO), that converts toxic organic components of mixed waste to water, carbon dioxide, and chloride or chloride precipitates. Aggressive oxidizer ions such as Ag 2+ , Co 3+ , or Fe 3+ are produced at an anode. These can attack organic molecules directly, and may also produce hydroxyl free radicals that promote destruction. Solid and liquid radioactive waste streams containing only inorganic radionuclide forms may be treated with existing technology and prepared for final disposal. The coulombic efficiency of the process has been determined, as well as the destruction efficiency for ethylene glycol, a surrogate waste. In addition, hazardous organic materials are becoming very expensive to dispose of and when they are combined with transuranic radioactive elements no processes are presently permitted. Mediated electrochemical oxidation is an ambient- temperature aqueous-phase process that can be used to oxidize organic components of mixed wastes. Problems associated with incineration, such as high-temperature volatilization of radionuclides, are avoided. Historically, Ag(II) has been used as a mediator in this process. Fe(III) and Co(III) are attractive alternatives to Ag(II) since they form soluble chlorides during the destruction of chlorinated solvents. Furthermore, silver itself is toxic heavy metal. Quantitative data have been obtained for the complete oxidation of ethylene glycol by Fe(III) and Co(III). Though ethylene glycol is a nonhalogenated organic, these data have enabled us to make direct comparisons of activities of Fe(III) and Co(III) with Ag(II). Very good quantitative data for the oxidation of ethylene glycol by Ag(II) had already been collected

  9. Effectiveness Analysis of a Non-Destructive Single Event Burnout Test Methodology

    CERN Document Server

    Oser, P; Spiezia, G; Fadakis, E; Foucard, G; Peronnard, P; Masi, A; Gaillard, R

    2014-01-01

    It is essential to characterize power MosFETs regarding their tolerance to destructive Single Event Burnouts (SEB). Therefore, several non-destructive test methods have been developed to evaluate the SEB cross-section of power devices. A power MosFET has been evaluated using a test circuit, designed according to standard non-destructive test methods discussed in the literature. Guidelines suggest a prior adaptation of auxiliary components to the device sensitivity before the radiation test. With the first value chosen for the de-coupling capacitor, the external component initiated destructive events and affected the evaluation of the cross-section. As a result, the influence of auxiliary components on the device cross-section was studied. This paper presents the obtained experimental results, supported by SPICE simulations, to evaluate and discuss how the circuit effectiveness depends on the external components.

  10. Ultrasonic process for destruction of chlorinated organic compounds in aqueous solution

    International Nuclear Information System (INIS)

    Wu, Jiann M.; Huang, Hann S.

    1993-01-01

    Laboratory investigations of the ultrasonic process for destruction of low concentrations of carbon tetrachloride (CCl 4 ) into nonhazardous end products were carried out in a bench-scale batch reactor, equipped with a 600-W ultrasonic power supply. Process parameters studied included irradiation time, concentration, steady-state operating temperature, pH, and the intensity of applied ultrasonic-wave energy. High destruction efficiencies of greater than 99% were achieved through this process, and the irradiation time and the intensity of applied energy were identified to be the most important process parameters. The irradiation time required for a given degree of destruction decreased with increasing intensity of the applied ultrasonic energy. In addition, a detailed chemical reaction mechanism for the destruction of CCl 4 in water was formulated. The agreement between the model and experimental results is generally good

  11. Indirect Self-Destructiveness in Women who Experience Domestic Violence.

    Science.gov (United States)

    Tsirigotis, Konstantinos; Łuczak, Joanna

    2018-01-02

    Lives of people experiencing domestic or/and intimate partner violence abound in many unpleasant events and physical and psychological suffering, which affects their psychosocial functioning. The aim of this study was to explore indirect self-destructiveness as a generalised behavioural tendency and its manifestations in women experiencing domestic violence. The "Chronic Self-Destructiveness Scale" (CS-DS) was used to study two groups of women: 52 women aged 30-65 years (mean age: 40.15) using assistance of the Crisis Intervention Centre due to experienced domestic violence (V group) and 150 well-matched women not experiencing domestic violence (NV group). Women suffering domestic violence (V) obtained significantly higher scores than women not experiencing domestic violence (NV) for both the general index and a majority of CS-DS subscales; it was only for the A1 (Transgression and Risk) subscale that they achieved somewhat lower scores. Correlation coefficients between particular CS-DS subscales in the V group were higher than in the NV group; there were also certain differences in coefficients between the groups. Subscale factor analysis results were different too: only one factor was isolated in the V group while two were distinguished in the NV group. It can be inferred from the results that the intensity of indirect self-destructiveness as a generalised behavioural tendency as well as of most its categories was higher in women experiencing domestic violence. Tendencies and categories of indirectly self-destructive behaviours in women suffering domestic violence were more closely connected with one another, and the internal coherence of indirect self-destructiveness in those women might also be higher.

  12. Non destructive testing: a unique R and D platform in Europe in Saclay

    International Nuclear Information System (INIS)

    On, Dinhill

    2012-01-01

    This article presents the 'Gerim 2' R and D platform which is dedicated to non destructive testing (NDT) in the field of information and communication technology (ICT). It is the first of its kind in Europe and is located in Saclay. It possesses a wide spectrum of NDT technologies: contactless ultrasonic testing, ultrasonic adaptive imagery, automated and multi-resolution X-ray tomography, etc. Founded by public research institutions and industrial partners, this centre is dedicated only to research and development

  13. Non-Destructive Radiological Characterisation Of Contaminated And Activated Concrete

    International Nuclear Information System (INIS)

    Cantrel, E.

    2005-01-01

    The decommissioning of nuclear facilities leads to large quantities of concrete and building material wastes. Radioactivity in building structures arise from very different physical processes such as neutron activation (bioshield), diffusion of the contaminants in the material (primary coolant leakage, maintenance and fuel loading) or aerosol deposition. The variety of the building material also extends the range of faced radiological characteristics. Therefore the minimization of concrete waste generation requires extensive characterisations and the availability of different measurement tools and methods. Up to now, these measurements came from the coring and the radiological analysis of the concrete, which is a destructive, long and costly technique. Looking for alternative solutions, SCK-CEN has started to investigate in collaboration with EDF -research and development and CEA (France) several non destructive methods based on gamma spectroscopy and different spectral examinations using mathematical calibration and modelling tools available on the market. Information on in-depth activity distribution can be derived from in situ gamma spectra by modelling absorption laws (peak to peak ratios) and photons interactions (Compton front) in the bulk of the concrete. As they combine modelling and measurement, the different methodologies being evaluated involve a lot of uncertainty sources linked to the measurement environment, to the knowledge available on site (historical background, material composition), to the operator responsible for the data acquisition and to the performance of the equipment. Therefore a detailed sensitivity analysis is required to define the range of applicability and the performances of the different methods

  14. Fracture-mechanical results of non-destructive testing - function, goals, methods

    International Nuclear Information System (INIS)

    Herter, K.H.; Kockelmann, H.; Schuler, X.; Waidele, H.

    2004-01-01

    Non-destructive testing provides data for fracture-mechanical analyses, e.g. defect size and orientation. On the other hand, fracture-mechanical analyses may help to define criteria for non-destructive testing, e.g. sensitivity, inspection intervals and inspection sites. The criteria applied differ as a function of the safety relevance of a component. (orig.) [de

  15. 7 CFR 1786.35 - Loss, theft, destruction, mutilation, or defacement of RUS guarantee.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false Loss, theft, destruction, mutilation, or defacement... Loans Pursuant to Section 306(A) of the RE Act § 1786.35 Loss, theft, destruction, mutilation, or... circumstances of the loss, theft, or destruction of the guarantee; and (vi) The lender or holder, shall present...

  16. Catalogue of test specimens for non-destructive examination

    International Nuclear Information System (INIS)

    1985-05-01

    One of the key elements in assuring the integrity of reactor primary circuits is the availability of trustworthy non-destructive methods for detecting dangerous defects that may be present. Various approaches to making such examinations are being developed, including the use of ultrasonic and radiographic techniques. To demonstrate their capability and reliability, they must be tested on steel specimens reproducing the various types of faults which may arise in real primary circuit vessels and piping. Such specimens are costly to fabricate. It is therefore clearly desirable that existing specimens should be made accessible to as many organisations as possible for testing. This catalogue contains detailed Information on forty-odd deliberately flawed plates, blocks, vessels, etc. which have been produced in OECD countries, along with the name of a contact person to whom inquiries should be directed in each case

  17. Qualifying program on Non-Destructive Testing, Visual Inspection of the welding (level 2)

    International Nuclear Information System (INIS)

    Shafee, M. A.

    2011-01-01

    Nondestructive testing is a wide group of analysis technique used in science and industry to evaluate the properties of a material, component or system without causing damage. Common Non-Destructive Testing methods include ultrasonic, magnetic-particle, liquid penetrate, radiographic, visual inspection and eddy-current testing. AAEA put the new book of the Non-Destructive Testing publication series that focused on Q ualifying program on Non-Destructive Testing, visual inspection of welding-level 2 . This book was done in accordance with the Arab standard certification of Non-Destructive Testing (ARAB-NDT-CERT-002) which is agreeing with the ISO-9712 (2005) and IAEA- TEC-DOC-487. It includes twenty one chapters dealing with engineering materials used in industry, the mechanical behavior of metals, metal forming equipments, welding, metallurgy, testing of welds, introduction to Non-Destructive Testing, defects in metals, welding defects and discontinuities, introduction to visual inspection theory, properties and tools of visual testing, visual testing, quality control regulations, standards, codes and specifications, procedures of welding inspections, responsibility of welding test inspector, qualification of Non-Destructive Testing inspector and health safety during working.

  18. 75 FR 6708 - Agency Information Collection Activities: Proposed Collection; Comments Requested

    Science.gov (United States)

    2010-02-10

    ... of Information Collection Under Review: Advanced Explosives Destruction Techniques (AEDT) Training... collection. (2) Title of the Form/Collection: Advanced Explosives Destruction Techniques (AEDT) Training... Management Division, 99 New York Ave., NE.,Washington, DC 20226. Written comments and suggestions from the...

  19. Destruction of DOE/DP surrogate wastes with supercritical water oxidation technology

    International Nuclear Information System (INIS)

    Bramlette, T.T.; Mills, B.E.; Hencken, K.R.; Brynildson, M.E.; Johnston, S.C.; Hruby, J.M.; Freemster, H.C.; Odegard, B.C.; Modell, M.

    1990-11-01

    Surrogate wastes of specific interest to DOE/DP production facilities (Hanford and Rocky Flats), and the electronics industry have been successfully processed in a laboratory-scale, supercritical water oxidation flow reactor. In all cases, the observed destruction/reduction efficiencies for the organic components were in excess of 99.9%, limited by instrumentation detection capability. Separation of the inorganic components of the Hanford process stream was more difficult to accomplish than destruction of the organic component. Large fractions of all metals contained in this stream were found both in the solids separator effluent and in deposits removed from the reactor. Mass closure was not achieved. Of the process stream's non-metallic, inorganic components, the sulfates and phosphates precipitated, while the nitrates tended to stay in solution. The inorganic material that did precipitate from the simulated Hanford mixed waste accumulated in zones that may be associated with changes in the chemical and physical properties of the supercritical fluid. Corrosion is expected to be a significant problem. Witness wires of Inconel 625, Hastalloy C-276, and titanium placed in the preheater, reactor and cooldown exchanger indicated selective dissolution of chromium, nickel, and molybdenum for some conditions, and non-selective dissolution for others. While these results are very promising, further research is required to evaluate the scalability, reliability, and economics of SCWO reactor components and systems, particularly for mixed wastes. Future research must explore a parameter space (temperature, pressure, pH, residence time, etc.) focused on selecting conditions and materials for specific process streams

  20. Pacific Islands Mass Communications; Selected Information Sources.

    Science.gov (United States)

    Richstad, Jim; McMillan, Michael

    1977-01-01

    Presents a bibliography of materials on such area of mass communications in the Pacific Islands as broadcasting, radio and television, cinema, communication research, mass media in education, Honululu Media Council, newspapers and newspapermen, and printing and satellite communication. (JEG)

  1. Evaluation and standardisation of fast analytical techniques for destructive radwaste control

    International Nuclear Information System (INIS)

    De Simone, A.; Troiani, F.

    2001-01-01

    The document describes the work programme carried out by the Laboratorio Nazionale per la 'Caratterizzazione dei Refit Radioattivi', in the frame of the European research project Destructive Radwaste Control. The main tasks of the research work were the evaluation of fast sample pre-treatment procedures and the development of chromatographic methods coupled to fast nuclide detection by Liquid Scintillation Counting. In order to test the High Performance Ion Chromatograph (HPIC) coupled to the Liquid Scintillation Counter (LSC) on high salt content solutions, synthetic cement solutions have been prepared and spiked with several β-emitters hard to be measured with non-destructive analyses, along with other radionuclides important for the determination of the radiological inventory in radwastes. As the validation tests for the new analytical methods involved the manipulation of radioactive solutions, a remote area for HPIC-LSC apparatus has been designed and performed, in order to operate in safe conditions. According to the research programme, fast analytical methods for the chemical separation and radionuclide detection of the radioactive elements of interest, have been developed and qualified. From the results of the work, some protocols of analysis have been defined: they contain all information about operative conditions for HPIC-LSC apparatus, field of applicability, chemical and radioactive detection limits [it

  2. Destructive and non-destructive tests for radioactive waste packages Task 3 Characterization of radioactive waste forms. A series of final reports (1985-89) No 43

    International Nuclear Information System (INIS)

    Odoj, R.

    1991-01-01

    On the basis of preliminary waste acceptance requirements quality control of radioactive waste has to be performed prior to interim storage or final disposal. The quality control can either be achieved by random tests on conditioned radioactive waste packages or by process qualification of the conditioning processes. One of the most important criteria is the activity of the radioactive waste product or packages. To get some first information on the waste package γ-spectrometric measurement is performed as non-destructive test. Besides the γ-emitting nuclides the α and β-emitting nuclides can be estimated by calculation if the waste was generated in nuclear power plants and the nuclide relations are known. If the non-destructive determination of nuclides is not sufficient or the non-radioactive content of the waste packages has to be identified sampling from the waste packages has to be performed. This can best be done by core drilling. To avoid the need of water for cooling the drill head, air cooled core drilling is investigated. As mixed wastes is not allowed for final disposal the determination of possible organic toxic materials like PCB, dioxin and furane-compounds in cemented wastes is conducted by GC-MS-investigations. For getting more knowledge in the field of process qualification concerning super compaction, instrumentation of the super compaction process is investigated and tested

  3. Destruction of chlorine-containing organic agents in a system plasma - liquid

    International Nuclear Information System (INIS)

    Chernyak, V.Ya.; Yukhymenko, V.V.; Babich, I.L.; Slyusarenko, Y.I.; Tarasova, Ya.B.

    2005-01-01

    The plasma chemical destruction of persistent toxic agent 1,1-di(4-chlorophenol)-2,2,2-threechlorethane (DDT) in water solutions is researched in this work. The destruction of agricultural pesticide containing DDT was carried out in water solution at atmospheric pressure with usage of plasma treatment on the basis of secondary discharges with a 'liquid' electrode, and of combination of a plasma method with reagent method. The comparative analysis of results of the physical-chemical analysis and biological test of toxicity of solutions is carried out and the optimum regimes for destruction and detoxication of DDT in water are determined

  4. Training Guidelines in Non-destructive Testing Techniques. 2013 Edition

    International Nuclear Information System (INIS)

    2014-12-01

    The IAEA promotes industrial applications of radiation technology, including non-destructive testing (NDT), through activities such as Technical Cooperation Projects (national and regional) and Coordinated Research Projects. Through this cooperation, Member States have initiated national programmes for the training and certification of NDT personnel. National certifying bodies have also been established based on International Organization for Standardization (ISO) standards. As part of these efforts, the IAEA has been actively involved in developing training materials. Consequently, IAEA-TECDOC-407, Training Guidelines in Non-destructive Testing Techniques, was published in 1987, then revised and expanded as IAEA-TECDOC-628 in 1991. Revisions of IAEA-TECDOC-628 were considered essential to meet the demands of end-user industries in Member States, and revised and expanded versions were issued in 2002 and 2008. These latter versions included work conducted by the International Committee for Non-Destructive Testing (ICNDT) and many national NDT societies. It is one of the publications referred to in ISO 9712:2005, Non-destructive Testing: Qualification and Certification of Personnel, which in turn is an internationally accepted standard, revised as ISO 9712:2012, Non-destructive Testing: Qualification and Certification of NDT Personnel. This publication is an updated version of IAEA-TECDOC-628. The content of which has been revised following the changes of ISO 9712 converging with EN 473 and becoming EN ISO 9712:2012, based on the experience of experts and comments from end-user industries. The details of the topics on each subject have been expanded to include the latest developments in the respective methods. The incorporated changes will assist the end-user industries to update their NDT qualification and certification schemes and course materials. This publication, like the previous versions, will continue to play an important role in international harmonization

  5. A Monte Carlo approach applied to ultrasonic non-destructive testing

    Science.gov (United States)

    Mosca, I.; Bilgili, F.; Meier, T.; Sigloch, K.

    2012-04-01

    Non-destructive testing based on ultrasound allows us to detect, characterize and size discrete flaws in geotechnical and architectural structures and materials. This information is needed to determine whether such flaws can be tolerated in future service. In typical ultrasonic experiments, only the first-arriving P-wave is interpreted, and the remainder of the recorded waveform is neglected. Our work aims at understanding surface waves, which are strong signals in the later wave train, with the ultimate goal of full waveform tomography. At present, even the structural estimation of layered media is still challenging because material properties of the samples can vary widely, and good initial models for inversion do not often exist. The aim of the present study is to combine non-destructive testing with a theoretical data analysis and hence to contribute to conservation strategies of archaeological and architectural structures. We analyze ultrasonic waveforms measured at the surface of a variety of samples, and define the behaviour of surface waves in structures of increasing complexity. The tremendous potential of ultrasonic surface waves becomes an advantage only if numerical forward modelling tools are available to describe the waveforms accurately. We compute synthetic full seismograms as well as group and phase velocities for the data. We invert them for the elastic properties of the sample via a global search of the parameter space, using the Neighbourhood Algorithm. Such a Monte Carlo approach allows us to perform a complete uncertainty and resolution analysis, but the computational cost is high and increases quickly with the number of model parameters. Therefore it is practical only for defining the seismic properties of media with a limited number of degrees of freedom, such as layered structures. We have applied this approach to both synthetic layered structures and real samples. The former contributed to benchmark the propagation of ultrasonic surface

  6. Inter-tegular span and head width as estimators of fresh and dry body mass in bumblebees (Bombus spp.)

    DEFF Research Database (Denmark)

    Hagen, Melanie; Dupont, Yoko

    2013-01-01

    Adult body mass is a strong correlate of many important life history traits of bees, and thus, has been used as a proxy for these traits in ecological studies. However, body mass is difficult to measure on live specimens in the field, and impossible to measure non-destructively on dry museum spec...

  7. Avoiding shame: young LGBT people, homophobia and self-destructive behaviours.

    Science.gov (United States)

    McDermott, Elizabeth; Roen, Katrina; Scourfield, Jonathan

    2008-11-01

    This paper reports on findings from qualitative research conducted in the UK that sought to explore the connections between sexual identities and self-destructive behaviours in young people. International evidence demonstrates that there are elevated rates of suicide and alcohol abuse amongst lesbian, gay, bisexual and transgender (LGBT) youth. Rarely included in this body of research are investigations into young LGBT people's views and experiences of self-destructive behaviours. Data from interviews and focus groups with young LGBT participants suggest a strong link between homophobia and self-destructive behaviours. Utilising a discourse analytic approach, we argue that homophobia works to punish at a deep individual level and requires young LGBT people to manage being positioned, because of their sexual desire or gendered ways of being, as abnormal, dirty and disgusting. At the centre of the complex and multiple ways in which young LGBT people negotiate homophobia are 'modalities of shame-avoidance' such as: the routinization and minimizing of homophobia; maintaining individual 'adult' responsibility; and constructing 'proud' identities. The paper argues that these strategies of shame-avoidance suggest young LGBT people manage homophobia individually, without expectation of support and, as such, may make them vulnerable to self-destructive behaviours.

  8. The wet destruction of dry organic material in a closed quartz tube

    International Nuclear Information System (INIS)

    Faanhof, A.; Das, H.A.

    1977-01-01

    Quantitative, rapid destruction of dry organic materials is necessary in many cases. The application of wet mineralization in a closed quartz tube and the optimization of destruction conditions are described. The procedure takes approximately 3.5 hours for 20 samples. The method was checked by radiotracer and activation experiments. The ratio of the Hg-203 count-rates of spiked and destructed samples to that of standards is 0.991+-0.014. The results of the instrumental analysis for tobacco and standard kale are: tobacco (84+-13) ng.g -1 , standard kale (155+-7)ng.g -1 . The average of the data for kale, reported in literature, is (150+-8)ng.g -1 . Results after destruction are: tobacco (82+-6)ng.g -1 , standard kale (158+-16)ng.g -1 . (N.L.Gy.)

  9. National seminar on non-destructive evaluation techniques: proceedings cum souvenir

    International Nuclear Information System (INIS)

    Dutta, N.G.; Kulkarni, P.G.; Purushotham, D.S.C.

    1994-01-01

    This volume contains selected papers presented at the National Seminar on Non-Destructive Evaluation Techniques held at Bhabha Atomic Research Centre, Mumbai during December 8-9, 1994. The papers covered a wide spectrum of non-destructive evaluation activities including that for quality assurance of various nuclear components and structures with the focal theme being computerization and robotics. The papers relevant to INIS are indexed separately

  10. Mass media in health promotion: an analysis using an extended information-processing model.

    Science.gov (United States)

    Flay, B R; DiTecco, D; Schlegel, R P

    1980-01-01

    The information-processing model of the attitude and behavior change process was critically examined and extended from six to 12 levels for a better analysis of change due to mass media campaigns. Findings from social psychology and communications research, and from evaluations of mass media health promotion programs, were reviewed to determine how source, message, channel, receiver, and destination variables affect each of the levels of change of major interest (knowledge, beliefs, attitudes, intentions and behavior). Factors found to most likely induce permanent attitude and behavior change (most important in health promotion) were: presentation and repetition over long time periods, via multiple sources, at different times (including "prime" or high-exposure times), by multiple sources, in novel and involving ways, with appeals to multiple motives, development of social support, and provisions of appropriate behavioral skills, alternatives, and reinforcement (preferably in ways that get the active participation of the audience). Suggestions for evaluation of mass media programs that take account of this complexity were advanced.

  11. Efficacy of Cotton Root Destruction and Winter Cover Crops for Suppression of Hoplolaimus columbus.

    Science.gov (United States)

    Davis, R F; Baird, R E; McNeil, R D

    2000-12-01

    The efficacy of rye (Secale cereale) and wheat (Triticum aestivum) winter cover crops and cotton stalk and root destruction (i.e., pulling them up) were evaluated in field tests during two growing seasons for Hoplolaimus columbus management in cotton. The effect of removing debris from the field following root destruction also was evaluated. Wheat and rye produced similar amounts of biomass, and both crops produced more biomass (P Cover crops did not suppress H. columbus population levels or increase subsequent cotton yields. Cotton root destruction did not affect cotton stand or plant height the following year. Cotton root destruction lowered (P rye or wheat cover crop or cotton root destruction following harvest is ineffective for H. columbus management in cotton.

  12. Predicting Tropical Cyclone Destructive Potential by Integrated Kinetic Energy According to the Powell/Reinhold Scale

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A method of predicting the destructive capacity of a tropical cyclone based on a new Wind Destructive Potential (WDP) and Storm Surge Destructive Potential (SDP)...

  13. DESTRUCTION OF THE LITHOSPHERE: FAULTBLOCK DIVISIBILITY AND ITS TECTONOPHYSICAL REGULARITIES

    Directory of Open Access Journals (Sweden)

    Semen I. Sherman

    2012-01-01

    Full Text Available A new concept is proposed concerning the origin and inception of ‘initial’ faults and formation of large blocks as a result of cooling of the Archaean lithosphere, during which Benard cells had formed (Fig. 5. At locations where cooling convection currents went down, partial crystallization took place, stresses were localized, and initial fault occurred there. The systems of such fault developed mainly in two directions and gradually formed an initial block pattern of the lithosphere. This pattern is now represented by the largest Archaean faults acting as boundaries of the lithospheric plates and large intraplate blocks (Fig. 6. This group of faults represents the first scaletime level of destruction of the lithosphere. Large blocks of the first (and may be the second order, which are located on the viscous foundation, interacted with each other under the influence of the sublithospheric movements or endogenous sources and thus facilitated the occurrence of high stresses inside the blocks. When the limits of strength characteristics of the block medium were exceeded, the intrablock stresses were released and caused formation of fractures/faults and blocks of various ranks (Fig. 14. This large group, including faultblock structures of various ranks and ages, comprises the second level of the scaletime destruction of the lithosphere.The intense evolution of ensembles of faults and blocks of the second scaletime level is facilitated by shortterm activation of faultblock structures of the lithosphere under the influence of strain waves. Periods of intensive shortterm activation are reliably detected by seismic monitoring over the past fifty years. Investigations of periodical processes specified in the geological records over the post-Proterozoic periods [Khain, Khalilov, 2009] suggest that in so far uninvestigated historical and more ancient times, the top of the lithosphere was subject to wave processes that

  14. Mechanism of radiation destruction of dyes in polymers

    International Nuclear Information System (INIS)

    Belichenko, A.S.; Dyumaev, K.M.; Maslyukov, A.P.; Matyushin, G.A.; Nechitailo, V.S.

    1991-01-01

    Considering the experimental results, it might be expected that the mechanism of radiation destruction of dyed polymers by UV-and γ-irradiation should also be associated with a chemical reaction between dye molecules and oxyradicals which appear either on destruction of polymer macromolecules or on oxidation of macroradicals by the oxygen dissolved in the matrix. Thus, the radiation stability of dyes should depend on the rate of formation of primary radicals in the polymer under the action of UV- and γ-irradiation. As has been demostrated, this rate can be influenced by 'resonant' low-molecular additives which perform oscillative cross-relaxation. (author) 8 refs.; 2 figs

  15. Destructive behavior of iron oxide in projectile impact

    Science.gov (United States)

    Shang, Wang; Xiaochen, Wang; Quan, Yang; Zhongde, Shan

    2017-12-01

    The damage strain values of Q235-A surface oxide scale were obtained by scanning electron microscopy (SEM/EDS) and universal tensile testing machine. The finite element simulation was carried out to study the destruction effects of oxidation at different impact rates. The results show that the damage value of the oxide strain is 0.08%. With the increase of the projectile velocity, the damage area of the oxide scale is increased, and the damage area is composed of the direct destruction area and the indirect failure area. The indirect damage area is caused by the stress/strain to the surrounding expansion after the impact of the steel body.

  16. The Creation and Destruction of Social Capital

    DEFF Research Database (Denmark)

    Svendsen, Gunnar Lind Haase; Svendsen, Gert Tinggaard

    ‘A welcome contribution to scholarly economic and public policy debates, The Creation and Destruction of Social Capital is written for advanced students yet offers insights critical to better understanding micro and macro economics alike.' - Willis M. Buhle, The Midwest Book Review ‘The Svendsens...... in to crafting this study.' - From the foreword by Elinor Ostrom Is social capital the ‘missing link' in economics? In this vital new book, the authors argue that the ‘forgotten' production factor of social capital is as crucial in economic decision-making as the other more traditional factors of production...... such as physical, financial and human capital. They attempt to bridge the gap between theory and reality by examining the main factors that determine entrepreneurship, co-operative movements and the creation and destruction of social capital....

  17. Non-destructive elecrochemical monitoring of reinforcement corrosion

    DEFF Research Database (Denmark)

    Nygaard, Peter Vagn

    been widely accepted as a non-destructive ”state of the art” technique for detection of corrosion in concrete structures. And, over the last decade, the trend in corrosion monitoring has moved towards quantitative non-destructive monitoring of the corrosion rate of the steel reinforcement. A few...... corrosion rate measurement instruments have been developed and are commercially available. The main features of these instruments are the combined use of an electrochemical technique for determining the corrosion rate and a so-called ”confinement technique”, which in principle controls the polarised surface...... area of the reinforcement, i.e. the measurement area. Both on-site investigations and laboratory studies have shown that varying corrosion rates are obtained when the various commercially available instruments are used. And in the published studies, conflicting explanations are given illustrating...

  18. Non-destructive examination system of vitreous body

    Science.gov (United States)

    Shibata, Takuma; Gong, Jin; Watanabe, Yosuke; Kabir, M. Hasnat; Masato, Makino; Furukawa, Hidemitsu; Nishitsuka, Koichi

    2014-04-01

    Eyeball plays a quite important role in acquiring the vision. Vitreous body occupies the largest part of the eyeball and consists of biological, elastic, transparent, gel materials. In the present medical examination, the non-destructive examination method of the vitreous body has not been well established. Here, we focus on an application of dynamic light scattering to this topic. We tried to apply our lab-made apparatus, scanning microscopic light scattering (SMILS), which was specially designed for observing the nanometer-scale network structure in gel materials. In order to examine the vitreous body using SMILS method, a commercial apparatus, nano Partica (Horiba Co. Ltd.) was also customized. We analyzed vitreous body using both the SMILS and the customized nano Partica. We successfully examined the vitreous bodies of healthy pigs in non-destructive way.

  19. Educational and(or manipulative function of the means of mass communication in a global society

    Directory of Open Access Journals (Sweden)

    Anđelković Petar M.

    2013-01-01

    Full Text Available The means of communication underwent a fast development in the twenty-first century, largely contributing to creating the society which gets a characteristic of a mass society. According to the mass society of "le Bone's psychology" and the development of the means of mass communication, with all positive options that it offers, many questions and dilemmas arise. From the point of culture the two most important ones are the following: despite the fact that the means of communication represent the social need, what is the level to which they can be a direct danger to the quality and value of national culture; and what is the level to which unselective and uncritical accepting of the imported content distance people from their own culture. The expansion of the means of mass communication also carries negative and bad influences because human state in the sea of information can be confused and distorted. On account of the enlarged range of available information, entertainment shows, especially the imported ones, societies are being slowly homogenized. Also the members of societies are slowly being cut off from everyday life, under the influence of media that are interfered in their life. It is not a rear case that the influence of television has a power of breaking man's connection with cultural practice, social system of values, norms (moral and legal, behaviour and individual ambitions. Imported information and entertainment shows can radically change social order which reflects on tradition and economical and social flows. The means of communication are an inseparable part of acculturation of a social system, but can also be an instrument of manipulation with people and the means for destruction of the national identity, what is actually happening.

  20. Estimation of the effectiveness of the destruction of natural stone oversized by a hydraulic hammer

    Directory of Open Access Journals (Sweden)

    V.G. Kravets

    2017-12-01

    Full Text Available The experience of mining operations shows that even with the application of progressive methods of drilling, it is impossible to completely exclude the output of a large fraction (oversized. The percentage of oversized mass emissions from the blasting mass depending on the mining and geological conditions may vary from 5 to 20 percent. Catching an oversized piece into the receiving slit of the main crusher is associated with stopping the whole technological chain of the enterprise. Sharpening of oversized pieces of the work area during conducting of extraction or overturning works leads to a decrease in the efficiency of mining operations. Crushing of oversized materials to the required sizes can be carried out in an explosive way (by a bore or overhead charge or by non-explosive methods, most of which are based on mechanical destruction under the action of local dynamic stresses that cause stress exceeding the resistance of internal bonds in the rock. To date, manufacturers are offered many types of shock mechanisms, based on the transformation of various types of energy (from gravitational, to the energy of chemical processes into mechanical. For a number of reasons, mostly economic, to date, the most common way is the mechanical method of the destruction of oversized beams using hydraulic and hydro pneumatic hammer. That is why the work considers the main factors influencing the performance of the hydraulic hammer, among which – the specific energy consumption of the oversize and the main parameters of the hydraulic engine passport on the basis of the excavator. In the publication the power law of the hydraulic hammer changes in dependence of the size of the oversized. Also, the basic parameters of the JCB JS235 HD excavator passport are defined in the work with the use of the INDECO HP 1500 hammer hammer.

  1. Investigating the effect of several thermodynamic parameters on exergy destruction in components of a tri-generation cycle

    International Nuclear Information System (INIS)

    Salehzadeh, A.; Khoshbakhti Saray, R.; JalaliVahid, D.

    2013-01-01

    Multiple energy generating cycles such as tri-generation cycles, which produce heat and cold in addition to power through burning of a primary fuel, have increasingly been used in recent decades. On the other hand, advanced exergy analysis of thermodynamic systems by splitting exergy destruction into endogenous and exogenous parts identifies internal irreversibilities of each of the components and the effect of these irreversibilities on the performance of other components. Therefore, main sources of exergy destruction in cycles can be highlighted and useful recommendations in order to improve the performance of thermodynamic cycles can be presented. In the present work, a tri-generation cycle with 100 MW power production, 70 MW heat and 9 MW cooling capacity is considered. For this tri-generation cycle, effects of various thermodynamic parameters on the amount of endogenous and exogenous exergy destructions, exergy loss and the amount of fuel consumption, are investigated. The results indicate that, increasing compressor pressure ratio, pre-heater outlet temperature and excess air leads to better combustion and lower exergy loss and fuel consumption. Increasing the mass flow rate of steam generator, while keeping the cycle outlet temperature constant and considering cooling capacity variable, lead to increase the first- and second-law efficiencies of the cycle. - Highlights: ► Advanced exergy analysis is used to analyze a tri-generation cycle. ► Increasing compressor pressure ratio leads to lower exergy loss and fuel consumption. ► Exergy loss is lowered by increasing pre-heater outlet temperature. ► Increasing the air flow rate of the cycle improves the performance of the cycle

  2. New tasks for non-destructive testing

    International Nuclear Information System (INIS)

    1990-01-01

    The proceedings contain 29 lectures and 43 posters which were presented in Trier at the annual meeting of the DGZfP in May 1990. The contributions report on further development of non-destructive testing methods towards more reliability, both of inspections and with regard to interpretation of the results. (MM) [de

  3. Destructive distillation: oils

    Energy Technology Data Exchange (ETDEWEB)

    West, J; Glover, S

    1918-01-31

    Canned and other coals are destructively distilled in continuously operated vertical retorts which at their upper portions are maintained at temperatures suitable for low temperature oil distillation such as about 700/sup 0/C, and at their lower portions the temperature is higher and such as to be suitable for the production of gas, e.g., about 1400/sup 0/C. Superheated steam is introduced into the lower portion of the retort, preferably by means of the arrangement described in Specification 120,458, and this is converted into blue water gas which assists the distillation in the center of the coal charge. The retorts are preferably such as are described in Specifications 2663/07 and 7757/14.

  4. Periodontium destruction associated with oncology therapy. Five case reports

    International Nuclear Information System (INIS)

    Wright, W.E.

    1987-01-01

    Radiation treatment to the head and neck and cytotoxic chemotherapy can produce deleterious side effects to the periodontium that are generally transient in nature, reversible, and do not result in permanently visible defects. However, combinations of the malignant disease itself, the direct and indirect effects of medical therapy and associated oral infections, along with local trauma can lead to periodontal tissue destruction with resulting permanent architectural defects. Five case reports illustrate destructive alterations of the periodontium that were associated with oncology therapy. Proposed guidelines for periodontal treatment of compromised individuals undergoing oncology therapies are suggested

  5. Social media as an instrument for organizing mass riots in the United Kingdom in August 2011

    Directory of Open Access Journals (Sweden)

    A N Katkina

    2015-12-01

    Full Text Available Social networks such as Facebook and Twitter have recently become very popular and turned to be an effective instrument for achieving political goals. However, the social networks’ impact is rather ambivalent: on the one hand, social media form specific political actors and support self-organization and civil movements; on the other hand, social media reinforce destructive and aggressive manifestations with the pronounced criminal purposes, e.g. social media ability to disseminate information among large groups is used to organize mass riots. The article analyzes one of the recent and significant events largely provoked by the social networks - mass riots in the United Kingdom in August 2011 that were originally a reaction to the murder of M. Diggan by a police officer who tried to arrest him as a suspect in drug trafficking and possession of weapons. The way events developed into mass riots was the result of discussions in social media and use of social networks to coordinate joint actions of mass riots participants. The article provides a detailed description of the events and authorities’ actions to overcome the crisis and prevent such riots in the future, thus making some conclusions about the nature of social media impact on the politics.

  6. Low temperature destructive distillation

    Energy Technology Data Exchange (ETDEWEB)

    1938-07-05

    A process is given and apparatus is described for the destructive distillation at low temperature of coal, oil shale, and the like by subjection to the action of a stream of hot gases or superhearted steam, flowing in a closed circuit. Subsequent treatment of the distillation residues with a gas stream containing oxygen results in combustion of the carbon-containing material therein brings to a high temperature the solid residue, in which the process comprises subsequently contacting the hot solid residue with the fluid stream effecting the distillation.

  7. Nilotinib-Associated Destructive Thyroiditis

    Directory of Open Access Journals (Sweden)

    Suhalia Bakerywala

    2015-01-01

    Full Text Available Protein tyrosine kinase inhibitors are currently an important drug class in the treatment of leukemia. They represent targeted cancer therapy and have become the treatment of choice in chronic myeloid leukemia. Tyrosine kinases are enzymes expressed in multiple tissues and are involved in several signaling pathways influencing cellular growth. Below we describe a patient who developed an unusual complication of tyrosine kinase inhibitor therapy: thyrotoxicosis due to destructive thyroiditis. We review the pathophysiology of tyrosine kinase inhibitor-induced thyroid dysfunction particularly with regard to new second-generation tyrosine kinase inhibitors.

  8. Deuterium ion irradiation induced blister formation and destruction

    Energy Technology Data Exchange (ETDEWEB)

    Song, Jaemin; Kim, Nam-Kyun; Kim, Hyun-Su; Jin, Younggil; Roh, Ki-Baek; Kim, Gon-Ho, E-mail: ghkim@snu.ac.kr

    2016-11-01

    Highlights: • The areal number density of blisters on the grain with (1 1 1) plane orientation increased with increasing ion fluence. • No more blisters were created above the temperature about 900 K due to high thermal mobility of ions and inactivity of traps. • The destruction of blister at the boundary induced by sputtering is proposed. • The blisters were destructed at the position about the boundary by high sputtering yield of oblique incident ions and thin thickness due to plastic deformation at the boundary. - Abstract: The blisters formation and destruction induced by the deuterium ions on a polycrystalline tungsten were investigated with varying irradiation deuterium ion fluence from 3.04 × 10{sup 23} to 1.84 × 10{sup 25} D m{sup −2} s{sup −1} and an fixed irradiated ion energy of 100 eV in an electron cyclotron resonance plasma source, which was similar to the far-scrape off layer region in the nuclear fusion reactors. Target temperature was monitored during the irradiation. Most of blisters formed easily on the grain with (1 1 1) plane orientation which had about 250 nm in diameter. In addition, the areal number density of blisters increased with increasing the ion fluence under the surface temperature reaching to about 900 K. When the fluence exceeded 4.6 × 10{sup 24} D m{sup −2}, the areal number density of the blister decreased. It could be explained that the destruction of the blister was initiated by erosion at the boundary region where the thickness of blister lid was thin and the sputtering yield was high by oblique incident ions, resulting in remaining the lid open, e.g., un-eroded center dome. It is possible to work as a tungsten dust formation from the plasma facing divertor material at far-SOL region of fusion reactor.

  9. 27 CFR 22.33 - Time of destruction of marks and brands.

    Science.gov (United States)

    2010-04-01

    ... marks and brands. 22.33 Section 22.33 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... Provisions Destruction of Marks and Brands § 22.33 Time of destruction of marks and brands. (a) Any person..., brand, and labels required by this chapter to be placed on packages of tax-free alcohol. (b) A person...

  10. Platelet destruction in autoimmune thrombocytopenic purpura: kinetics and clearance of indium-111-labeled autologous platelets

    International Nuclear Information System (INIS)

    Stratton, J.R.; Ballem, P.J.; Gernsheimer, T.; Cerqueira, M.; Slichter, S.J.

    1989-01-01

    Using autologous 111 In-labeled platelets, platelet kinetics and the sites of platelet destruction were assessed in 16 normal subjects (13 with and three without spleens), in 17 studies of patients with primary autoimmune thrombocytopenic purpura (AITP), in six studies of patients with secondary AITP, in ten studies of patients with AITP following splenectomy, and in five thrombocytopenic patients with myelodysplastic syndromes. In normal subjects, the spleen accounted for 24 +/- 4% of platelet destruction and the liver for 15 +/- 2%. Untreated patients with primary AITP had increased splenic destruction (40 +/- 14%, p less than 0.001) but not hepatic destruction (13 +/- 5%). Compared with untreated patients, prednisone treated patients did not have significantly different spleen and liver platelet sequestration. Patients with secondary AITP had similar platelet counts, platelet survivals, and increases in splenic destruction of platelets as did patients with primary AITP. In contrast, patients with myelodysplastic syndromes had a normal pattern of platelet destruction. In AITP patients following splenectomy, the five nonresponders all had a marked increase (greater than 45%) in liver destruction compared to five responders (all less than 40%). Among all patients with primary or secondary AITP, there was an inverse relationship between the percent of platelets destroyed in the liver plus spleen and both the platelet count (r = 0.75, p less than 0.001) and the platelet survival (r = 0.86, p less than 0.001). In a stepwise multiple linear regression analysis, total liver plus spleen platelet destruction, the platelet survival and the platelet turnover were all significant independent predictors of the platelet count. Thus platelet destruction is shifted to the spleen in primary and secondary AITP. Failure of splenectomy is associated with a marked elevation in liver destruction

  11. Trophic flow structure of the Danajon ecosystem (Central Philippines) and impacts of illegal and destructive fishing practices

    Science.gov (United States)

    Bacalso, Regina Therese M.; Wolff, Matthias

    2014-11-01

    A trophic model of the shallow Danajon Bank, in the Central Visayas, Philippines was developed using a mass-balance approach (Ecopath) to describe the system characteristics and fisheries interactions. The Ecopath model is composed of 37 functional groups and 17 fishing fleet types reflecting the high diversity of catches and fishing operations in the Danajon Bank. Collectively, the catch is dominated by lower trophic level fish and invertebrates as reflected in the mean trophic level of the fishery (2.95). The low biomass and high exploitation levels for many upper trophic level groups and the little evidence for strong natural physical disturbances suggest that top-down fishery is the main driver of system dynamics. The mixed trophic impacts (MTI) analysis reveals the role of the illegal and destructive fishing operations in influencing the ecosystem structure and dynamics. Furthermore, the illegal fisheries' estimated collective annual harvest is equivalent to nearly a quarter of the entire municipal fisheries catch in the area. Improved fisheries law enforcement by the local government units to curb these illegal and destructive fishing operations could substantially increase the potential gains of the legal fisheries.

  12. Destructive examination of shipping package 9975-02644

    Energy Technology Data Exchange (ETDEWEB)

    Daugherty, W. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2017-11-23

    Destructive and non-destructive examinations have been performed on the components of shipping package 9975-02644 as part of a comprehensive SRS surveillance program for plutonium material stored in the K-Area Complex (KAC). During the field surveillance inspection of this package in KAC, three non-conforming conditions were noted: the axial gap of 1.389 inch exceeded the 1 inch maximum criterion, the exposed height of the lead shield was greater than the 4.65 inch maximum criterion, and the difference between the upper assembly inside height and the exposed height of the lead shield was less than the 0.425 inch minimum criterion. All three of these observations relate to axial shrinkage of the lower fiberboard assembly. In addition, liquid water (condensation) was observed on the interior of the drum lid, the thermal blanket and the air shield.

  13. Non-destructive sampling of ancient insect DNA

    DEFF Research Database (Denmark)

    Thomsen, Philip Francis; Elias, Scott; Gilbert, Tom

    2009-01-01

    BACKGROUND: A major challenge for ancient DNA (aDNA) studies on insect remains is that sampling procedures involve at least partial destruction of the specimens. A recent extraction protocol reveals the possibility of obtaining DNA from past insect remains without causing visual morphological...... of 77-204 base pairs (-bp) in size using species-specific and general insect primers. CONCLUSION/SIGNIFICANCE: The applied non-destructive DNA extraction method shows promising potential on insect museum specimens of historical age as far back as AD 1820, but less so on the ancient permafrost......-preserved insect fossil remains tested, where DNA was obtained from samples up to ca. 26,000 years old. The non-frozen sediment DNA approach appears to have great potential for recording the former presence of insect taxa not normally preserved as macrofossils and opens new frontiers in research on ancient...

  14. Radiation-chemical destruction of cellulose and other polysaccharides

    International Nuclear Information System (INIS)

    Ershov, B.G.

    1998-01-01

    The studies concerning the radiation-chemical destruction of cellulose, its ethers and some polysaccharides (xylan, starch, decstrans, chitin, chitosan and geparin) are discussed. Ionising irradiation causes the destruction of these compounds with the decay of pyranose ring, accompanied by the formation of compounds containing carbonyl or carboxyl groups, as well as hydrogen, carbon dioxide, and carbon oxide. The efficiency of radiation degradation increases with increasing the temperature and depends on the structure of polysaccharides and the nature of substituents. The mechanism of radiation-chemical transformations of cellulose and others polysaccharides is proposed. Prospects of the application of radiation-chemical methods of treatment of cellulose and other polysaccharides in industry and agriculture considered [ru

  15. Manifestations and intensity of indirect self-destructiveness in patients with psoriasis vulgaris

    Directory of Open Access Journals (Sweden)

    Wojciech Bienias

    2016-07-01

    Full Text Available Introduction: Psoriasis is a chronic systemic disease which often significantly reduces the quality of life in extreme situations can provide to severe depression and even suicide. Indirect self-destructiveness is a generalized trend of behavior consisting of taking steps to increase the likelihood of negative and reduce the likelihood of positive consequences for the entity within a general manifestations such as transgression of norms and risk, addictions, poor health maintenance, personal and social neglect, lack of planfulness, helplessness and passiveness. Polish and world literature has no publications on indirect self-destructiveness in psoriasis nor in any skin diseases. The main aim of this study was to investigate the intensity and symptoms of indirect self-destructiveness in population of patients with psoriasis vulgaris Material and methods: The material consisted of 82 patients with psoriasis vulgaris hospitalized in the Department of Dermatology, Pediatric Dermatology and Oncology in 2013-2014. For the achievement of the objectives of the research socio-demographic questionnaire (own authorship and Indirect Chronic Self-Destructiveness Scale by Kelley in Polish adaptation of Suchańska (version for men and women – each containing 52 issues was used. Results: The results showed that in a population of people with psoriasis overall severity of indirect self-destructiveness was in the lower range of the average results. The dominant class of indirect self-destructiveness was helplessness and passivity that preceded the poor health maintenance and lack of planning. Conclusions: The results will enrich the existing knowledge about the harmful conduct of psoriasis and a better approach to the patient.

  16. Engineering Information Security The Application of Systems Engineering Concepts to Achieve Information Assurance

    CERN Document Server

    Jacobs, Stuart

    2011-01-01

    Information security is the act of protecting information from unauthorized access, use, disclosure, disruption, modification, or destruction. This book discusses why information security is needed and how security problems can have widespread impacts. It covers the complete security lifecycle of products and services, starting with requirements and policy development and progressing through development, deployment, and operations, and concluding with decommissioning. Professionals in the sciences, engineering, and communications fields will turn to this resource to understand the many legal,

  17. Status report on developments and cooperation on risk-informed inservice-inspection and non-destructive testing (NDT) qualification in OECD-NEA member countries - CSNI integrity and ageing working group

    International Nuclear Information System (INIS)

    Skanberg, Lars

    2005-01-01

    presented at the Workshop have been published in the proceedings referenced NEA/CSNI/R(2004)9. The two reports along with the NRWG-report EUR 21320 are the main source of information for this Status Report on Developments and Cooperation on Risk-Informed In-Service-Inspection and Non-Destructive Testing (NDT) Qualification in OECD-NEA member countries. The report is organized in the following way: introduction to early ISI strategies and Augmented ISI and NDT Qualification; Risk-Informed In-Service Inspection (RI-ISI): Development of RI-ISI strategies, RI-ISI Regulatory guidance, Important aspects of RI-ISI, Overview of RI-ISI methods, Comparison of methods, Overview of RI-ISI applications and pilot studies, RI-ISI experience so far, Further evaluations and developments of RI-ISI methodologies; Non-Destructive Testing (NDT) Qualification: Development of NDT qualification strategies, NDT-qualification requirements and applications, NDT-qualification experience. Conclusions and recommendations are then given

  18. Avoidable and unavoidable exergy destruction and exergoeconomic evaluation of the thermal processes in a real industrial plant

    Directory of Open Access Journals (Sweden)

    Vučković Goran D.

    2012-01-01

    Full Text Available Exergy analysis is a universal method for evaluating the rational use of energy. It can be applied to any kind of energy conversion system or chemical process. An exergy analysis identifies the location, the magnitude and the causes of thermodynamic inefficiencies and enhances understanding of the energy conversion processes in complex systems. Conventional exergy analyses pinpoint components and processes with high irreversibility. To overcome the limitations of the conventional analyses and to increase our knowledge about a plant, advanced exergy-based analyses are developed. These analyses provide additional information about component interactions and reveal the real potential for improvement of each component constituting a system, as well as of the overall system. In this paper, a real industrial plant is analyzed using both conventional and advanced exergy analyses, and exergoeconomic evaluation. Some of the exergy destruction in the plant components is unavoidable and constrained by technological, physical and economic limitations. Calculations related to the total avoidable exergy destruction caused by each component of the plant supplement the outcome of the conventional exergy analysis. Based on the all-reaching analysis, by improving the boiler operation (elimination of approximately 1 MW of avoidable exergy destruction in the steam boiler the greatest improvement in the efficiency of the overall system can be achieved.

  19. COMMUNICATIVE PROVOCATION AS A STRATEGY OF DESTRUCTIVE BEHAVIOUR IN EVERY-DAY CONFLICT

    Directory of Open Access Journals (Sweden)

    Volkova Olga Sergeevna

    2014-12-01

    Full Text Available The article is concentrated on the issue of systematization and classification of strategies and tactics of individual's verbal behavior in a number of typical situations associated with disharmonious communication. Its scientific originality is defined by the necessity to present the provocation phenomenon as a category of communicative linguistics and linguistic pragmatics. The use of discourse analysis and descriptive pragmatic interpretation of real communication forms have enabled the revelation of various patterns of destructive verbal behavior that could provoke a communicative conflict. Communicative provocation is described as a strategy of destructive behavior aimed at dragging a communication partner into a conflict interaction or creating conditions for its occurrence. The provocation strategy is implemented in disharmonious interactions by means of individual or complex communication tactics including not only the aggressive ones: indignation, reproach, deliberate false informing, exaggerated demonstration of emotions, but also such tolerant tactics as praise, advice, apology, assurances, admiration, persuasion, etc. Two forms of communicative provocation are represented in the article. A direct provocation presupposes personal involvement of a provocateur in the conflict interaction while an indirect one allows its initiator stay aside from the open confrontation. In the latter case the provocateur stimulates and demonstrates the parties' conflict of interests, which leads to the communication harmony disruption.

  20. Data fusion: a new concept in non-destructive testing

    International Nuclear Information System (INIS)

    Georgel, B.; Lavayssiere, B.

    1995-01-01

    Non-destructive testing of some components (made of austenitic steel, or of a complex shape for example) requires quite often the use of several methods such as X-ray, ultrasonics, Eddy Currents. Then, a skilled operator is able to perform the expertise of the specimen. The main goal of this paper is to show that 3D diagnosis may be improved in term of reliability and precision by fusion of several NDT techniques. A data fusion algorithm is more that trying to improve the visualisation or the rendering of NDT data sets. It consists for each volume element, in computing a new value representing the combined information and in formulating a diagnosis on this basis. To achieve such a goal, know-how in modeling of physical phenomena and in applied mathematics is crucial. (authors). 4 refs., 2 figs

  1. Calcium hydroxide suppresses Porphyromonas endodontalis lipopolysaccharide-induced bone destruction.

    Science.gov (United States)

    Guo, J; Yang, D; Okamura, H; Teramachi, J; Ochiai, K; Qiu, L; Haneji, T

    2014-05-01

    Porphyromonas endodontalis and its main virulence factor, lipopolysaccharide (LPS), are associated with the development of periapical diseases and alveolar bone loss. Calcium hydroxide is commonly used for endodontic therapy. However, the effects of calcium hydroxide on the virulence of P. endodontalis LPS and the mechanism of P. endodontalis LPS-induced bone destruction are not clear. Calcium hydroxide rescued the P. endodontalis LPS-suppressed viability of MC3T3-E1 cells and activity of nuclear factor-κB (NF-κB) in these cells, resulting in the reduced expression of interleukin-6 and tumor necrosis factor-α. In addition, calcium hydroxide inhibited P. endodontalis LPS-induced osteoclastogenesis by decreasing the activities of NF-κB, p38, and ERK1/2 and the expression of nuclear factor of activated T-cell cytoplasmic 1 in RAW264.7 cells. Calcium hydroxide also rescued the P. endodontalis LPS-induced osteoclastogenesis and bone destruction in mouse calvaria. Taken together, our present results indicate that calcium hydroxide suppressed bone destruction by attenuating the virulence of P. endodontalis LPS on bone cells.

  2. Destructive spondyloarthropathy in hemodialysis patients

    International Nuclear Information System (INIS)

    Orzincolo, C.; Ghedini, M.; Cardona, P.; Bedani, P.L.; Scutellari, P. N.

    1991-01-01

    Destructive spondyloarthropathy (DSA) has been observed in patients undergoing long-term hemodialysis. The pathophysiology of this condition is still unknown, but there is evidence that amyloid depositions play an important role in its development. Despite several reports, the radiological evolution of these lesions is poorly known. The authors report the results of the radiographic follow-up (12-18 months) of 9 cases (7 female and 2 male patients; age 63±6 years) hemodilized for over 60 months (mean: 126±33). In 7 cases. radiographic patterns of destructive arthropathy were seen in peripheral joints as well. X-ray pictures demonstrated: 1) increased erosion of vertebral end plates (in all cases); 2) increased narrowing of invertebral spaces (in 5 cases); 3) increased collapse of vertebral bodies (in 5 cases); 4) increased malalignment of the involved segments (in 4 cases). In 3 autopsied cases β 2 -microglobulin amyloid depositions were found in disc and ligamentous paravertebral tissue. These results confirm that: 1) DSA is progressive in longterm hemodialysis patients; 2) radiographic evolution is often very quick; 3) the cervical spine is the most frequently involved location and the one where lesions are quickest to develop; 4) severe malalignament of the involved spine may be present, with subsequent neurological complications

  3. METHODS OF ASSESSING THE DEGREE OF DESTRUCTION OF RUBBER PRODUCTS USING COMPUTER VISION ALGORITHMS

    Directory of Open Access Journals (Sweden)

    A. A. Khvostov

    2015-01-01

    Full Text Available For technical inspection of rubber products are essential methods of improving video scopes analyzing the degree of destruction and aging of rubber in an aggressive environment. The main factor determining the degree of destruction of the rubber product, the degree of coverage is cracked, which can be described as the amount of the total area, perimeter cracks, geometric shapes and other parameters. In the process of creating a methodology for assessing the degree of destruction of rubber products arises the problem of the development of machine vision algorithm for estimating the degree of coverage of the sample fractures and fracture characterization. For the development of image processing algorithm performed experimental studies on the artificial aging of several samples of products that are made from different rubbers. In the course of the experiments it was obtained several samples of shots vulcanizates in real time. To achieve the goals initially made light stabilization of array images using Gaussian filter. Thereafter, for each image binarization operation is applied. To highlight the contours of the surface damage of the sample is used Canny algorithm. The detected contours are converted into an array of pixels. However, a crack may be allocated to several contours. Therefore, an algorithm was developed by combining contours criterion of minimum distance between them. At the end of the calculation is made of the morphological features of each contour (area, perimeter, length, width, angle of inclination, the At the end of the calculation is made of the morphological features of each contour (area, perimeter, length, width, angle of inclination, the Minkowski dimension. Show schedule obtained by the method parameters destruction of samples of rubber products. The developed method allows you to automate assessment of the degree of aging of rubber products in telemetry systems, to study the dynamics of the aging process of polymers to

  4. Autodestruição humana Human self-destruction

    Directory of Open Access Journals (Sweden)

    Roosevelt M. S. Cassorla

    1994-01-01

    Full Text Available É assinalada a complexidade das situações autodestrutivas, tanto em sua vertente social como em suas manifestações aparentemente individuais (suicídio, acidentes, homicídio, doenças, drogadição, etc.. Discutem-se as falhas nos registros e propõem-se métodos para seu estudo mais aprofundado. Nesta visão, discutem-se fantasias autodestrutivas, em particular as ligadas a perdas, a feridas narcísicas, à autodestruição provocada pela vítima, e levantam-se hipóteses sobre fantasias relacionadas a suicídios entre índios Guaraní. Esses aspectos são apresentados enfatizando-se sua aplicação preventiva no campo da Saúde Pública.This study analyzes the complexity of self-destructive situations in both their social dimensions and their apparent individual manifestations (suicide, accidents, homicide, illness, drug addiction, etc.. The article points out errors in the reporting of these situations and proposes methods for further study of the phenomenon. Self-destructive fantasies are discussed, especially those related to losses, narcissistic wounds, and self-destruction precipitated by the victim. Hypotheses are raised concerning fantasies related to suicides among the native Brazilian Guarani nation. The above aspects are presented to emphasize prevention in public health.

  5. Empirical information on nuclear matter fourth-order symmetry energy from an extended nuclear mass formula

    Directory of Open Access Journals (Sweden)

    Rui Wang

    2017-10-01

    Full Text Available We establish a relation between the equation of state of nuclear matter and the fourth-order symmetry energy asym,4(A of finite nuclei in a semi-empirical nuclear mass formula by self-consistently considering the bulk, surface and Coulomb contributions to the nuclear mass. Such a relation allows us to extract information on nuclear matter fourth-order symmetry energy Esym,4(ρ0 at normal nuclear density ρ0 from analyzing nuclear mass data. Based on the recent precise extraction of asym,4(A via the double difference of the “experimental” symmetry energy extracted from nuclear masses, for the first time, we estimate a value of Esym,4(ρ0=20.0±4.6 MeV. Such a value of Esym,4(ρ0 is significantly larger than the predictions from mean-field models and thus suggests the importance of considering the effects of beyond the mean-field approximation in nuclear matter calculations.

  6. Numerical Investigation of the Main Characteristics of Heat and Mass Transfer while Heating the Heterogeneous Water Droplet in the Hot Gases

    Directory of Open Access Journals (Sweden)

    Piskunov Maxim V.

    2016-01-01

    Full Text Available The processes of heat and evaporation of heterogeneous water droplet with solid (by the example of carbon inclusion in hot (from 800 K to 1500 K gases were investigated by the developed models of heat and mass transfer. We defined the limited conditions, characteristics of the droplet and the gas medium which are sufficient for implementing the “explosive” destruction of heterogeneous droplet due to intensive vaporization on an inner interface, and intensive evaporation of liquid from an external (free droplet surface. The values of the main characteristic of the process (period from start of heating to “explosive” destruction obtained in response to using various heat and mass transfer models were compared.

  7. The Strip: Las Vegas and the Symbolic Destruction of Spectacle

    OpenAIRE

    Al, Stefan Johannes

    2010-01-01

    Over the past 70 years, various actors have dramatically reconfigured the Las Vegas Strip in many forms. I claim that behind the Strip's "reinventions" lies a process of symbolic destruction. Since resorts distinguish themselves symbolically, each new round of capital accumulation relies on the destruction of symbolic capital of existing resorts. A new resort either ups the language within a paradigm, or causes a paradigm shift, which devalues the previous resorts even further. This is why, i...

  8. 3D Modeling and Simulation for Electromagnetic Non-Destructive Testing- Problems and Limitations

    International Nuclear Information System (INIS)

    Ilham Mukriz Zainal Abidin; Nurul Ain Ahmad Latif

    2011-01-01

    Non-Destructive Testing (NDT) plays a critical role in nuclear power plants (NPPs) for life cycle management; such testing requires specialists with various NDT related expertise with specific equipment. This paper will discuss the importance of 3D modeling and simulation for electromagnetic NDT for critical and complex components in terms of engineering reasoning and physical trials. Results from simulation are presented which show the link established between the measurements and information relating to defects, such as 3D shape, size and location, which facilitates not only forward problem but also inverse modeling involving experimental system specification and configuration; and pattern recognition for 3D defect information. Subsequently, the problems and limitations pertinent to 3D modeling and simulation are then highlighted and areas of improvement are discussed. (author)

  9. PEROXIDE DESTRUCTION TESTING FOR THE 200 AREA EFFLUENT TREATMENT FACILITY

    International Nuclear Information System (INIS)

    Halgren, D.L.

    2010-01-01

    The hydrogen peroxide decomposer columns at the 200 Area Effluent Treatment Facility (ETF) have been taken out of service due to ongoing problems with particulate fines and poor destruction performance from the granular activated carbon (GAC) used in the columns. An alternative search was initiated and led to bench scale testing and then pilot scale testing. Based on the bench scale testing three manganese dioxide based catalysts were evaluated in the peroxide destruction pilot column installed at the 300 Area Treated Effluent Disposal Facility. The ten inch diameter, nine foot tall, clear polyvinyl chloride (PVC) column allowed for the same six foot catalyst bed depth as is in the existing ETF system. The flow rate to the column was controlled to evaluate the performance at the same superficial velocity (gpm/ft 2 ) as the full scale design flow and normal process flow. Each catalyst was evaluated on peroxide destruction performance and particulate fines capacity and carryover. Peroxide destruction was measured by hydrogen peroxide concentration analysis of samples taken before and after the column. The presence of fines in the column headspace and the discharge from carryover was generally assessed by visual observation. All three catalysts met the peroxide destruction criteria by achieving hydrogen peroxide discharge concentrations of less than 0.5 mg/L at the design flow with inlet peroxide concentrations greater than 100 mg/L. The Sud-Chemie T-2525 catalyst was markedly better in the minimization of fines and particle carryover. It is anticipated the T-2525 can be installed as a direct replacement for the GAC in the peroxide decomposer columns. Based on the results of the peroxide method development work the recommendation is to purchase the T-2525 catalyst and initially load one of the ETF decomposer columns for full scale testing.

  10. Destructive, distillation

    Energy Technology Data Exchange (ETDEWEB)

    Jameson, J

    1882-10-23

    The apparatus employed resembles a reverberatory furnace, having a brickwork chamber with pipes or passages leading from the bottom, through which gases and vapors, arising from destructive distillation or heating of the materials with which the chamber is charged to a certain depth, are drawn by suction produced by a fan or blower. The materials are heated from above by firegates admitted from a separate furnace or fireplace. When shale is thus treated, to obtain burning gas, oil, and ammonia, the suction may be so regulated as to give preponderance to whichever product is desired, the depth of material treated being also concerned in the result. The process is applicable also in the treatment of coal pit refuse, sawdust, peat, and other matters, to obtain volatile products; in burning limestone to obtain carbon dioxide; and in roasting ores. Reference is made to a former Specification for coking coal, No. 1947, A. D. 1882.

  11. Short time evaluation of metallic materials' fatigue potential combining destructive and non-destructive testing methods

    International Nuclear Information System (INIS)

    Starke, Peter; Wu, Haoran; Boller, Christian

    2015-01-01

    Fatigue of engineering structures is an issue from an engineering design point. The lifetime of materials being subject to repeated mechanical loads is limited. Different examples of failures and fateful air accidents have caused significant cost and claims to the operators as well as manufacturers in excess of fatalities. Criticality of failure increases with increasing age and the uncertainty of operational loads applied. In such a case a reassessment of a structural materials' condition is in big need should damage tolerance criteria still be met, being the essential ground rule for aeronautical structural design. It is therefore the challenging aim to use a metallic material's microstructure characterizing non-destructive testing (NDT) parameter or a combination of those as a parameter to be scanned over a defined surface of the component considered to more realistically characterize the damage condition and to use this information twofold: (a) to more precisely assess the structural component's residual life and (b) to feed the information recorded back into a specific database belonging to an approach named PHYBAL. The physically based fatigue life evaluation method (PHYBAL) is a short-time procedure for the evaluation of fatigue data based on a small number of fatigue tests performed on un-notched specimens only. This method significantly reduces the effort for experimentation in terms of time and cost by around 90 % and inhibits remarkable scientific as well as economic advantages. The paper highlights the high capability of PHYBAL as well as the suitability for assessing the residual life of aeronautical components also with respect to the application of this approach in the light of structural health monitoring issues.

  12. Magnetic Non-destructive Testing of Plastically Deformed Mild Steel

    Directory of Open Access Journals (Sweden)

    Jozef Pala

    2004-01-01

    Full Text Available The Barkhausen noise analysis and coercive field measurement have been used as magnetic non-destructive testing methods for plastically deformed high quality carbon steel specimens. The strain dependence of root mean square value and power spectrum of the Barkhausen noise and the coercive field are explained in terms of the dislocation density. The specimens have been subjected to different magnetizing frequencies to show the overlapping nature of the Barkhausen noise. The results are discussed in the context of usage of magnetic non-destructive testing to evaluate the plastic deformation of high quality carbon steel products.

  13. Using mass-media communications to increase population usage of Australia’s Get Healthy Information and Coaching Service®

    Directory of Open Access Journals (Sweden)

    O’Hara Blythe J

    2012-09-01

    Full Text Available Abstract Background Global obesity prevalence is increasing and population health programs are required to support changes to modifiable lifestyle risk factors. Such interventions benefit from mass-communications to promote their use. The Get Healthy Information and Coaching Service ® (GHS utilised mass-reach media advertising to recruit participants to an Australian state-wide program. Methods A stand alone population survey collected awareness, knowledge and behavioural variables before the first advertising phase, (n = 1,544; August -September 2010, during (n = 1,500; February - March 2011 and after the advertising period (n = 1,500; June-July 2011. GHS usage data (n = 6,375 was collated during July 2010 – June 2011. Results The results showed that television-lead mass-media significantly increased unprompted awareness (0% to 31.8%, p  Conclusions GHS mass-communications campaigns are effective at increasing awareness and usage of the GHS, especially among hard-to-reach population groups. Television advertising provides universal reach, but should be supplemented by health professional referrals and targeted mail-out information to recruit participants to the intensive GHS coaching program.

  14. Analysis of unbalanced sensor in eddy current method of non destructive testing

    International Nuclear Information System (INIS)

    Chegodaev, V.V.

    2001-01-01

    Different types of sensors are used in eddy current method of non-destructive testing. The choosing of sensor type depends on control object. Different types of sensors can have the same schemes of cut-in in device for formation of information signal. The most common scheme of sensor cut-in is presented. The calculation of output voltage when the sensor is on a segment of the control object, which has not defect is made. The conditions of balancing are adduced and it was shown that the balancing of sensor is very difficult. The methods of compensation or account of voltage of an imbalance are indicated. (author)

  15. Photothermal Analysis Applied To Non-Destructive Evaluation Of Paint On Polymer Substrates

    Science.gov (United States)

    Vergne, D.; Busse, G.

    1988-10-01

    The decoration and protection quality of coatings on polymers is of considerable interest for industrial applications. However, at present there is no non-destructive (NDE) method to monitor the quality of these coatings during the manufacturing process or while they are in use. As an approach for such a method we use photothermal analysis where the propagation and reflection of optically generated thermal waves is investigated. We found that one can monitor the drying process, the effect of surface temperature treatment, and coating thickness (accuracy + 2 μm in 50 μm thickness). The information obtained with this remote NDE method is adequate for most industrial applications, eg car manufacturing.

  16. Model of the discrete destruction process of a solid body

    Science.gov (United States)

    Glagolev, V. V.; Markin, A. A.

    2018-03-01

    Destruction is considered as a discrete thermomechanical process, in which the deformation of a solid body is achieved by changing the boundary stresses acting on the part of the volume being destroyed with the external load unchanged. On the basis of the proposed concept, a model for adhesive stratification of a composite material is constructed. When adhesive stratification is used, the stress state of one or two boundaries of the adhesive layer changes to zero if the bonds with the joined body are broken. As a result of the stratification, the interaction between the part of the composite, which may include an adhesive layer and the rest of the body stops. When solving the elastoplastic problem of cohesive stratification, the region in which the destruction criterion is achieved is identified. With the help of a repeated solution of the problem of subcritical deformation with the known law of motion of the boundary of the region, the distribution of the load (nodal forces) acting from the region to the body is located. The next step considers the change in the stress–strain state of the body in the process of destruction of the selected area. The elastoplastic problem is solved with a simple unloading of the formed surface of the body and preservation of the external load corresponding to the beginning of the process of destruction.

  17. Data survivability vs. security in information systems

    International Nuclear Information System (INIS)

    Levitin, Gregory; Hausken, Kjell; Taboada, Heidi A.; Coit, David W.

    2012-01-01

    A multiple objective problem formulation and solution methodology is presented to select optimal information and data storage configurations considering both data survivability and data security, as well as cost. This paper considers a situation where the information is divided into several separately stored blocks in order to mitigate the risk of unauthorized access or theft. The information can be used only if all of the blocks are accessed. To impede the information theft, the defender prefers to maximize the number of blocks. On the other hand the destruction of any block destroys the integrity of information and makes it impossible to use. To impede the information destruction, the defender prefers to maximize the number of parallel (reserve) copies of each block, regardless how many blocks in series there are. Given the set of available information storage resources, the defender must consider a multi-objective optimization problem to determine how many blocks and their copies to create, and how to distribute them among available resources in order to minimize information vulnerability, insecurity, and storage cost. Non-dominated solutions to this problem are determined using a multiple objective genetic algorithm (MOGA). This methodology is demonstrated with two general examples.

  18. The application of dynamic method for the temperature measurement of gas destruction in a plasma reactor

    International Nuclear Information System (INIS)

    Ryszard, Sarba

    2009-01-01

    This paper presents an experimental and theoretical study of the conversion of measuring probe temperature into hot gas temperature. The author gives a solution to the problem of a destruction temperature measurement in a plasma reactor. The temperature conversion is based on the thermodynamic similarity theory and statistical thermodynamics verification. The experimental measurements of the hot gas temperature have been made in the place where it considerably exceeds the melting point of the measuring probe material. The heat exchange phenomenon on the measuring probe's surface with the hot gas surrounding it is described by a forced convection equation. An analysis has been made of the heat flowing in and out of the measuring probe. The experimental part of the paper includes: an experimental measurement of gas velocity by means of luminous particles, a hot gas measurement for one distance from a nozzle and different diameters of the measuring probe, as well as different probing velocities. Numerical simulations have been made of the temperature distribution in a plasma jet. The experimental results are congruent with theoretical predictions. The aim of this research is a contribution to the structuring of a mathematical model of mass and energy balance in the processes of NHF 2 CL waste destruction.

  19. NITRATE DESTRUCTION LITERATURE SURVEY AND EVALUATION CRITERIA

    Energy Technology Data Exchange (ETDEWEB)

    Steimke, J.

    2011-02-01

    This report satisfies the initial phase of Task WP-2.3.4 Alternative Sodium Recovery Technology, Subtask 1; Develop Near-Tank Nitrate/Nitrite Destruction Technology. Some of the more common anions in carbon steel waste tanks at SRS and Hanford Site are nitrate which is corrosive, and nitrite and hydroxide which are corrosion inhibitors. At present it is necessary to periodically add large quantities of 50 wt% caustic to waste tanks. There are three primary reasons for this addition. First, when the contents of salt tanks are dissolved, sodium hydroxide preferentially dissolves and is removed. During the dissolution process the concentration of free hydroxide in the tank liquid can decrease from 9 M to less than 0.2 M. As a result, roughly half way through the dissolution process large quantities of sodium hydroxide must be added to the tank to comply with requirements for corrosion control. Second, hydroxide is continuously consumed by reaction with carbon dioxide which occurs naturally in purge air used to prevent buildup of hydrogen gas inside the tanks. The hydrogen is generated by radiolysis of water. Third, increasing the concentration of hydroxide increases solubility of some aluminum compounds, which is desirable in processing waste. A process that converts nitrate and nitrite to hydroxide would reduce certain costs. (1) Less caustic would be purchased. (2) Some of the aluminum solid compounds in the waste tanks would become more soluble so less mass of solids would be sent to High Level Vitrification and therefore it would be not be necessary to make as much expensive high level vitrified product. (3) Less mass of sodium would be fed to Saltstone at SRS or Low Level Vitrification at Hanford Site so it would not be necessary to make as much low level product. (4) At SRS less nitrite and nitrate would be sent to Defense Waste Processing Facility (DWPF) so less formic acid would be consumed there and less hydrogen gas would be generated. This task involves

  20. Non-Destructive Techniques Based on Eddy Current Testing

    Science.gov (United States)

    García-Martín, Javier; Gómez-Gil, Jaime; Vázquez-Sánchez, Ernesto

    2011-01-01

    Non-destructive techniques are used widely in the metal industry in order to control the quality of materials. Eddy current testing is one of the most extensively used non-destructive techniques for inspecting electrically conductive materials at very high speeds that does not require any contact between the test piece and the sensor. This paper includes an overview of the fundamentals and main variables of eddy current testing. It also describes the state-of-the-art sensors and modern techniques such as multi-frequency and pulsed systems. Recent advances in complex models towards solving crack-sensor interaction, developments in instrumentation due to advances in electronic devices, and the evolution of data processing suggest that eddy current testing systems will be increasingly used in the future. PMID:22163754

  1. Destruction of Refractory Carbon in Protoplanetary Disks

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Dana E.; Blake, Geoffrey A. [Division of Geological and Planetary Sciences, California Institute of Technology, 1200 E. California Blvd., Pasadena, CA 91125 (United States); Bergin, Edwin A. [Department of Astronomy, University of Michigan, 1085 S. University, Ann Arbor, MI 48109-1107 (United States); Ciesla, Fred J. [Department of Geophysical Sciences, The University of Chicago, 5734 South Ellis Ave., Chicago, IL 60637 (United States); Visser, Ruud [European Southern Observatory, Karl-Schwarzschild-Str. 2, D-85748, Garching (Germany); Lee, Jeong-Eun [School of Space Research, Kyung Hee University, 1732, Deogyeong-daero, Giheung-gu, Yongin-si, Gyeonggi-do 17104 (Korea, Republic of)

    2017-08-10

    The Earth and other rocky bodies in the inner solar system contain significantly less carbon than the primordial materials that seeded their formation. These carbon-poor objects include the parent bodies of primitive meteorites, suggesting that at least one process responsible for solid-phase carbon depletion was active prior to the early stages of planet formation. Potential mechanisms include the erosion of carbonaceous materials by photons or atomic oxygen in the surface layers of the protoplanetary disk. Under photochemically generated favorable conditions, these reactions can deplete the near-surface abundance of carbon grains and polycyclic aromatic hydrocarbons by several orders of magnitude on short timescales relative to the lifetime of the disk out to radii of ∼20–100+ au from the central star depending on the form of refractory carbon present. Due to the reliance of destruction mechanisms on a high influx of photons, the extent of refractory carbon depletion is quite sensitive to the disk’s internal radiation field. Dust transport within the disk is required to affect the composition of the midplane. In our current model of a passive, constant- α disk, where α = 0.01, carbon grains can be turbulently lofted into the destructive surface layers and depleted out to radii of ∼3–10 au for 0.1–1 μ m grains. Smaller grains can be cleared out of the planet-forming region completely. Destruction may be more effective in an actively accreting disk or when considering individual grain trajectories in non-idealized disks.

  2. Revisiting the Model of Creative Destruction: St. Jacobs, Ontario, a Decade Later

    Science.gov (United States)

    Mitchell, Clare J. A.; de Waal, Sarah B.

    2009-01-01

    Ten years ago, the model of creative destruction was developed to predict the fate of communities that base their development on the commodification of rural heritage (Mitchell, C.J.A., 1998. Entrepreneurialism, commodification and creative destruction: a model of post-modern community development. Journal of Rural Studies 14, 273-286). Its…

  3. Characterization of Breast Masses Using a New Method of Ultrasound Contrast Agent Imaging in 3D Mapping of Vascular Anomalies

    National Research Council Canada - National Science Library

    LeCarpentier, Gerald

    2002-01-01

    .... The purpose of this work is to develop an innovative dual-transducer method to control the destruction and imaging of ultrasound contrast during 3D ultrasound scanning of suspicious breast masses...

  4. Site of destruction of 111 indium-labeled autologous platelets and effectiveness of splenectomy

    International Nuclear Information System (INIS)

    Najean, Y.; Dufour, Y.

    1991-01-01

    Platelet life-span was studied in 165 patients (including 25 children) with chronic idiopathic thrombocytopenic purpura (of at least one year duration) using 111 indium-oxinate-labeled autologous platelets. The site of platelet destruction was not correlated with age, severity of the disease or presence of immunologic anomalies; this site was characteristic of each individual and remained unchanged in a given patient when the test was repeated several times. Splenectomy was performed in 79 patients (at the discretion of physicians who elected splenectomy in 63% of patients with splenic destruction versus 26% only of patients with hepatic destruction). A very close correlation was found between site of destruction and efficiency of splenectomy. However, 13% of initially improved patients developed a recurrence. Spontaneous improvement was seen in only 8 of the non-splenectomized patients with long-term follow-ups (1-5 years) [fr

  5. Production-phase greenhouse gas emissions arising from deliberate withdrawal and destruction of fresh fruit and vegetables under the EU's Common Agricultural Policy.

    Science.gov (United States)

    Porter, Stephen D; Reay, David S; Bomberg, Elizabeth; Higgins, Peter

    2018-08-01

    Since 1962 the Common Agriculture Policy (CAP) of the European Union (EU) has enabled payment of subsidy to some food producers for withdrawal of specific commodities - including fresh fruit and vegetables (FFV) - where market prices have fallen below a pre-set level. These deliberate withdrawals have led to large amounts of usable food (~60% of withdrawals) being destroyed on farms across the EU. Such wasted food incurs a significant climate change cost through its production-phase greenhouse gas (GHG) emissions. Here, we assess the magnitude of this FFV withdrawal and destruction, its spatial and temporal trends, and its associated GHG emissions between 1989 and 2015. We find the total mass of avoidable FFV losses occurring as a result of these EU CAP market interventions for this 26-year period to be 23.6Mt. The production-phase GHG emissions associated with the withdrawn FFV that was subsequently destroyed amount to 5.1Mt CO 2 e over this period. We also find that, with each successive Common Market Organisation (CMO) reform there has been a marked reduction (~95% between 1989 and 2015) in the quantity of such deliberate withdrawals. Surprisingly, however, whilst the absolute quantity of FFV withdrawn and destroyed has fallen, the proportion of withdrawals that is destroyed remained roughly static at an average of about 60%. Finally, to inform debate on action needed to address FFV specifically, and food loss and waste more generally, we highlight potential scenarios and mechanisms to reduce withdrawals, avoid FFV destruction and improve alternative use of withdrawn food in the future. Copyright © 2018 Elsevier B.V. All rights reserved.

  6. Coupled field induced conversion between destructive and constructive quantum interference

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Xiangqian, E-mail: xqjiang@hit.edu.cn; Sun, Xiudong

    2016-12-15

    We study the control of quantum interference in a four-level atom driven by three coherent fields forming a closed loop. The spontaneous emission spectrum shows two sets of peaks which are dramatically influenced by the fields. Due to destructive quantum interference, a dark line can be observed in the emission spectrum, and the condition of the dark line is given. We found that the conversion between destructive and constructive quantum interference can be achieved through controlling the Rabi frequency of the external fields.

  7. THE CAUSES STUDY OF THE PREMATURE DESTRUCTION OF THE CONCRETE SLEEPERS ON THE ZNAMENKA TRACK OF THE IF10 OF THE ODESSA RAILWAY

    Directory of Open Access Journals (Sweden)

    V. V. Kovalenko

    2015-11-01

    Full Text Available Purpose. The aim of the paper is to study the factors that led to the premature destruction of concrete sleepers. Methodology. The express-method of determining the morphology and chemical composition of structural components in concrete, patented by Dnipropetrovsk National University of Railway Transport was used in the paper. Methodology makes it possible to control the morphology and chemical composition of cement crystals as the weakest link in the structure of composite material – concrete, and to predict, in accordance with the recommendations of the German Scientists, the possibility of structural transformation of cement in the solid state, which determines the durability of the composite material. Findings. The mass destruction of concrete sleepers on railways of Ukraine is becoming more frequent every year. Moreover, if such destruction in 2010 appears after 4-5 years of operation, in 2015 it is only after 2-3 years of installing the sleepers on the main railways. The nature of the destruction of concrete sleepers can be noted as malty factors influence on it. The batches of cement and other raw materials have been investigated before using with the standard methods in accredited laboratories of PAC «Ukrgeolbudm» (Kyiv and received a positive evaluation for use in the production of concrete sleepers. However, a significant error in experimental data by standard methods not allowed revealing the critical properties of materials that adversely effect on the durability of rail base concrete. According to the research it was determined that the causes of mass destruction of sleepers are: 1 the inhomogeneity of the macrostructure of the concrete, as a consequence of the use of crushed rock of fraction 5-25 mm; 2 the impact of aggressive environment on the surface of the concrete sleepers; 3 the presence of a secondary structure of sleepers of large ettringite crystals prone to restructuring and the presence of alkaline silicic acid

  8. Application of ICT in the non-destructive inspection of explosive device

    International Nuclear Information System (INIS)

    Wang Zhe; Li Tiantuo; Liu Zhiqiang; Pei Zhihua; Wang Zhiping

    2003-01-01

    The inspection of explosive device is an important task in the store of the weapons. The technique of non-destructive examination with radial, especially the ICT, is an effective method. The paper mainly introduces the design and the theories on the inspection system and software system of the application of industrial ICT in the non-destructive examination of explosive device, and gives a reference to the work in such fields

  9. Optical generation,detection and non-destructive testing applications of terahertz waves

    Institute of Scientific and Technical Information of China (English)

    ZHANG; Weili; LIANG; Dachuan; TIAN; Zhen; HAN; Jiaguang; GU; Jianqiang; HE; Mingxia; OUYANG; Chunmei

    2016-01-01

    Optoelectronic terahertz generation and detection play a key role in the applications of non-destructive testing,which involves different areas such as physics,biological,material science,imaging,explosions detection,astronomy applications,semiconductor technology and superconductiong electronics. In this article,we present a reviewof the principle and performance of typical terahertz sources,detectors and non-destructive testing applications. On this basis,the newdevelopment and trends of terahertz radiation detectors are also discussed.

  10. Voices in Suicide. The Relationship between the Firestone Voice Scale for Self-Destructive Behavior and Self-Destructive Life-Styles.

    Science.gov (United States)

    Firestone, Robert W.

    This article presents findings from recent research demonstrating a significant relationship between parental introjects or "voices," and self-destructive behavior. The "voice" is defined as a systematized, integrated pattern of negative thoughts accompanied by angry affect, that is the basis of an individual's maladaptive…

  11. 9 CFR 50.7 - Destruction of animals.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Destruction of animals. 50.7 Section 50.7 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE COOPERATIVE CONTROL AND ERADICATION OF LIVESTOCK OR POULTRY DISEASES ANIMALS DESTROYED BECAUSE OF...

  12. Non-destructive testing of electronic component packages

    International Nuclear Information System (INIS)

    Anderle, C.

    1975-01-01

    A non-destructive method of investigating packaged parts of semiconductor components by X radiation is described and the relevant theoretical relations limiting this technique are derived. The application of the technique is demonstrated in testing several components. The described method is iNsimple and quick. (author)

  13. Forms of destructive relationships among the employees: how many and what the extent of the spread?

    Directory of Open Access Journals (Sweden)

    Jolita Vveinhardt

    2017-03-01

    Full Text Available Destructive behavior at work is one of the most important research topics affecting organizational performance standards and well-being. The article presented a scientific literature analysis and synthesis as well as the authors insight into destructive relationships in the work environment. There a various forms of destructive relationship in a workplace: mobbing, rare bullying, discrimination, nepotism, favoritism, cronyism, social ostracism, social loafing, organizational cynicism, depersonalization and cyber loafing. Destructive relationships shape the work environment has a negative impact on productivity, motivation, job satisfaction, health and promotes resignation. Destructive relationships among employees are explored in various sectors like transport and logistics, restaurants and catering, telecommunications, education and science and others.

  14. Periodontal tissue destruction caused by an elastic orthodontic ...

    African Journals Online (AJOL)

    Once this cooperation is lost, possible negative effects may be the consequence. ... that arises when elastic orthodontic spacers are being used in the mouth. Key words: Open-flap curettage, Orthodontic spacer, Periodontal destruction ...

  15. Electrochemical organic destruction in support of Hanford tank waste pretreatment

    International Nuclear Information System (INIS)

    Lawrence, W.E.; Surma, J.E.; Gervais, K.L.; Buehler, M.F.; Pillay, G.; Schmidt, A.J.

    1994-10-01

    The US Department of Energy's Hanford Site in Richland, Washington, has 177 underground storage tanks that contain approximately 61 million gallons of radioactive waste. The current cleanup strategy is to retrieve the waste and separate components into high-level and low-level waste. However, many of the tanks contain organic compounds that create concerns associated with tank safety and efficiency of anticipated separation processes. Therefore, a need exists for technologies that can safely and efficiently destroy organic compounds. Laboratory-scale studies conducted during FY 93 have shown proof-of-principle for electrochemical destruction of organics. Electrochemical oxidation is an inherently safe technology and shows promise for treating Hanford complexant concentrate aqueous/ slurry waste. Therefore, in support of Hanford tank waste pretreatment needs, the development of electrochemical organic destruction (ECOD) technology has been undertaken. The primary objective of this work is to develop an electrochemical treatment process for destroying organic compounds, including tank waste complexants. Electroanalytical analyses and bench-scale flow cell testing will be conducted to evaluate the effect of anode material and process operating conditions on the rate of organic destruction. Cyclic voltammetry will be used to identify oxygen overpotentials for the anode materials and provide insight into reaction steps for the electrochemical oxidation of complexants. In addition, a bench-scale flow cell evaluation will be conducted to evaluate the influence of process operating conditions and anode materials on the rate and efficiency of organic destruction using the nonradioactive a Hanford tank waste simulant

  16. Experimentally Evaluated Explosion Resistance and Performance of Destruction Unit in Multiple Detonation of Ammunition

    Directory of Open Access Journals (Sweden)

    P. A. Baskakov

    2016-01-01

    Full Text Available The paper presents results of development and experimental investigation of explosion resistance and destruction unit performance in multiple detonation of ammunition with an explosive weight up to 0.7 kg of TNT. A preliminary evaluation of the explosion resistance was carried out using a model of explosion resistance localizer, represented as a thick-walled tube. As a result of explosive tests, the nature and characteristics of tube deformation under repeated explosions have been revealed. The findings allowed us to develop the first embodiment of the destruction unit with a turning non-separable heater and a two-layer localizer, which was heated by the induction field. The explosive life tests have revealed the following drawbacks: low resource localizer, jamming rotating mechanism in contact with the splinters, and impossible replacement of damaged localizer. In the second embodiment of the destruction unit a plate-assembled easychange localizer is mounted on the heater, and it is heated by heat transfer from the core. Tests have shown that, with such a placement, the uniform heating of the localizer is not reached. This leads to incomplete destruction of ammunition. Besides, because of the low strength of the pins connecting the plates, occurrs their rapid destruction. Taking into consideration the shortcomings of the previous two designs, the third option of the destruction unit with a replaceable localizer and induction heating of a localizer has been designed. A localizer material having high mechanical strength at high temperatures and good ferromagnetic properties has been selected. The paper offers an all-metal localizer design with the thickest wall at the bottom that is the most damageable. The paper has experimentally determined a critical deformation of the localizer when destroying the ammunition with varying weight of explosive and defined the heater and bump resource. As a result, the work proposes the destruction unit design

  17. Mechanisms of CFR composites destruction studying with pulse acoustic microscopy

    Science.gov (United States)

    Petronyuk, Y. S.; Morokov, E. S.; Levin, V. M.; Ryzhova, T. B.; Chernov, A. V.

    2016-05-01

    Non-destructive inspection of carbon-fiber-reinforced (CFR) composites applied in aerospace industry attracts a wide attention. In the paper, high frequency focused ultrasound (50-100 MHz) has been applied to study the bulk microstructure of the CFR material and mechanisms of its destruction under the mechanical loading. It has been shown impulse acoustic microscopy provides detecting the areas of adhesion loss at millimeter and micron level. Behavior of the CFR laminate structure fabricated by prepreg or infusion technology has been investigated under the tensile and impact loading.

  18. Complete destructive interference of partially coherent fields

    NARCIS (Netherlands)

    Gbur, G.J.; Visser, T.D.; Wolf, E.

    2004-01-01

    A three-point source model is used to study the interference of wavefields which are mutually partially coherent. It is shown that complete destructive interference of the fields is possible in such a "three-pinhole interferometer" even if the sources are not fully coherent with respect to each

  19. Rock mass characterization for tunnels in the Copenhagen limestone

    DEFF Research Database (Denmark)

    Foged, Niels Nielsen; Jakobsen, Lisa; Jackson, Peter

    2007-01-01

    Tunnels in Copenhagen are drilled through highly anisotropic limestone comprising alternating strongly lithified and less lithified parts. The mass quality of the limestone is usually defined from fracture spacing registered in core samples. The deposit is, however, affected destructively by dril...... by drilling activity yielding a low Rock Quality Designation RQD. In-situ observations of the limestone in excavations or televiewer logs reveal only few natural discontinuities compared to core logging, indicating a very good suitability for tunneling....

  20. Early non-destructive biofouling detection and spatial distribution: Application of oxygen sensing optodes

    KAUST Repository

    Farhat, Nadia

    2015-06-11

    Biofouling is a serious problem in reverse osmosis/nanofiltration (RO/NF) applications, reducing membrane performance. Early detection of biofouling plays an essential role in an adequate anti-biofouling strategy. Presently, fouling of membrane filtration systems is mainly determined by measuring changes in pressure drop, which is not exclusively linked to biofouling. Non-destructive imaging of oxygen concentrations (i) is specific for biological activity of biofilms and (ii) may enable earlier detection of biofilm accumulation than pressure drop. The objective of this study was to test whether transparent luminescent planar O2 optodes, in combination with a simple imaging system, can be used for early non-destructive biofouling detection. This biofouling detection is done by mapping the two-dimensional distribution of O2 concentrations and O2 decrease rates inside a membrane fouling simulator (MFS). Results show that at an early stage, biofouling development was detected by the oxygen sensing optodes while no significant increase in pressure drop was yet observed. Additionally, optodes could detect spatial heterogeneities in biofouling distribution at a micro scale. Biofilm development started mainly at the feed spacer crossings. The spatial and quantitative information on biological activity will lead to better understanding of the biofouling processes, contributing to the development of more effective biofouling control strategies.

  1. Mass transfer of therapeutics through natural human plaque biofilms: a model for therapeutic delivery to pathological bacterial biofilms.

    Science.gov (United States)

    Robinson, Colin

    2011-09-01

    Bacterial biofilms in the mouth are prime mediators of the destruction of the dental and oral tissues. This brief review summarises recent work using a device for generating intact plaque in the mouth on natural enamel surfaces such that quantitative studies of mass transfer through natural plaque biofilms could be carried out in relation to plaque architecture. This data is discussed against the background of existing information. The device revealed complex plaque architecture with high a surface area to mass ratio decreasing from the exterior of the biofilm towards the tissue surface. Fluoride, a potent inhibitor of caries was concentrated in the outer regions of the biofilm. This implies some restriction of diffusion and possibly binding to the high surface area of the outer biofilm. Whilst all components examined conformed to this distribution pattern, some relatively uncharged materials penetrated the bacterial biomass whilst other, more highly charged materials tended to be restricted to the channels or biomass surface. Plaque architecture was robust but could be altered using detergent indicating that biomass architecture and chemistry could be manipulated as a possible means of facilitating mass transport of therapeutics. Copyright © 2011 Elsevier Ltd. All rights reserved.

  2. FDG-PET imaging for chronic expanding hematoma in pelvis with massive bone destruction

    Energy Technology Data Exchange (ETDEWEB)

    Hamada, Kenichiro [Osaka University Graduate School of Medicine, Department of Nuclear Medicine and Tracer Kinetics, Suita, Osaka (Japan); Osaka University Graduate School of Medicine, Department of Orthopaedic Surgery, Suita, Osaka (Japan); Myoui, Akira; Ueda, Takafumi; Tamai, Noriyuki; Yoshikawa, Hideki [Osaka University Graduate School of Medicine, Department of Orthopaedic Surgery, Suita, Osaka (Japan); Higuchi, Ichiro; Hatazawa, Jun [Osaka University Graduate School of Medicine, Department of Nuclear Medicine and Tracer Kinetics, Suita, Osaka (Japan); Inoue, Atsuo [Osaka University Graduate School of Medicine, Department of Radiology, Suita, Osaka (Japan)

    2005-12-01

    Chronic expanding hematoma is a rare presentation of a hematoma characterized by a persistent increase in size for more than a month after the initial hemorrhage. We present a 65-year-old man with a chronic expanding hematoma in his ilium who was receiving anticoagulant treatment. The patient had a delayed manifestation of a femoral neuropathy with massive bone destruction. 2-Deoxy-[{sup 18}F]fluoro-d-glucose (FDG) positron emission tomography (PET) imaging revealed an increased uptake in the rim of the mass in images acquired 1 h after FDG injection. FDG-PET scans were performed using a dedicated PET scanner (HeadtomeV/SET2400 W, Shimadzu, Kyoto, Japan), and the PET data for the most metabolically active region of interest (ROI) were analyzed. The maximum standardized uptake value (SUVmax) was set to a cut-off point of 3.0 to distinguish between benign and malignant lesions. The SUVmax of the patient's lesion was 3.10, suggesting a malignant lesion. The characteristics of FDG-PET images of chronic expanding hematomas, including the uptake of FDG in the peripheral rim of the mass as a result of inflammation, should be recognized as a potential interpretive pitfall in mimicking a sarcoma. (orig.)

  3. The Combine Use of Semi-destructive and Non-destructive Methods for Tiled Floor Diagnostics

    Science.gov (United States)

    Štainbruch, Jakub; Bayer, Karol; Jiroušek, Tomáš; Červinka, Josef

    2017-04-01

    The combination of semi-destructive and non-destructive methods was used to asset the conditions of a tiled floor in the historical monument Minaret, situated in the park complex of the Chateau Lednice (South Moravia Region, Czech Republic), before its renovation. Another set of measurements is going to be performed after the conservation works are finished. (The comparison of the results collected during pre- and post-remediation measurements will be known and presented during the General Assembly meeting in Wien.) The diagnostic complex of methods consisted of photogrammetry, resistivity drilling and georadar. The survey was aimed to contour extends of air gaps beneath the tiles and the efficiency of filling gaps by means of injection, consolidation and gluing individual layers. The state chateau Lednice creates a part of the Lednice-Valtice precinct, a UNESCO landmark, and belongs among the greatest historic monuments in Southern Moravia. In the chateau park there is a romantic observation tower in the shape of a minaret built according to the plans of Josef Hardtmuth between 1798-1804. The Minaret has been extensively renovated for many decades including the restoration of mosaic floors from Venetian terazzo. During the static works of the Minaret building between 1999-2000, the mosaic floors in the rooms on the second floor were transferred and put back onto concrete slabs. Specifically, the floor was cut up to tiles and these were glued to square slabs which were then attached to the base plate. The transfer was not successful and the floor restoration was finalized between 2016-2017. The damage consisted in separating the original floor from the concrete plate which led to creating gaps. Furthermore, the layers of the floor were not compact. It was necessary to fill the gaps and consolidate and glue the layers. The existence of air gap between individual layers of the tiles and their degradation was detected using two different diagnostic methods: semi-destructive

  4. Role of water and ethanol radicals in the radiation destruction of human deoxyhemoglobin

    International Nuclear Information System (INIS)

    Szweda-Lewandowska, Z.

    1986-01-01

    In this study destruction of human deoxyhemoglobin (deoxy-Hb) induced by the action of primary products of water radiolysis and of secondary ethanol radicals was investigated. The extent of destruction was estimated on the basis of absorbance ratio after conversion of hemoglobin into methemoglobin and the changes in the parameters of hemoglobin oxygenation. Deoxy-Hb solutions were irradiated under the atmosphere of argon and N 2 O, in the absence and presence of ethanol. In each case the radiation-chemical yield for hemoglobin destruction was determined. Results were elaborated statistically estimating, by the method of least squares. (orig./PW)

  5. 7 CFR 1901.509 - Loss, theft, destruction, mutilation, or defacement of insured notes, insurance contracts, and...

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false Loss, theft, destruction, mutilation, or defacement... Notes § 1901.509 Loss, theft, destruction, mutilation, or defacement of insured notes, insurance... writing. (iv) A full statement of circumstances of the loss, theft, or destruction of the note. (2) An...

  6. Distillation, destructive

    Energy Technology Data Exchange (ETDEWEB)

    Young, W; Fyfe, J

    1897-06-03

    Improvements in retorts of the class described in Specification No. 1377, A. D. 1882, for the destructive distillation of shale are disclosed. The retorts are provided with enlarged multiple hoppers for the reception of the fresh shale, and with enlarged chambers for the reception of the exhausted shale. The hoppers are built up of steel plates, and are bolted at the bottom to flanges on the upper ends of the retorts so as to permit of differential expansion. The shale is fed continuously into the retorts by rods or chains carried by a rocking shaft, or by a slit tube attached to a rocking shaft, and in connection with the hydraulic main. The spent shale is discharged into the receiving chambers by means of a series of prongs extending through a grating and carried by a rocking shaft actuated by levers engaging with reciprocating bars. In an alternative arrangement, the pronged rocking shafts are replaced by worms or screws formed into one half with a right-hand thread and the other half with a left-hand thread.

  7. Creative Destruction and Cycles in the US Capital Market: Evidence from Fortune 500 Firms

    OpenAIRE

    Chakraborty, Debojyoti; Bhattacharya, Kaushik

    2009-01-01

    The paper analyzes the relationship between creative destruction and cycles in the US capital market. Creative destruction in a year is measured by the number of new firms in the Fortune 500 list. Creative destruction is found to be positively associated with smoothed annual returns based on the Dow Jones Index (DJI), signifying that new entries in Fortune 500 tend to be more during boom than during recession years. Easier financing of innovative ideas during boom is hypothesized as a reason ...

  8. Lessons learned from H1N1 epidemic: The role of mass media in informing physicians

    Directory of Open Access Journals (Sweden)

    Jaleh Gholami

    2011-01-01

    Full Text Available Objectives: Preparedness and response at the time of pandemic range from writing programs to conducting procedures as well as informing the target population. The present study was conducted to evaluate the awareness of general practitioners in Tehran, at the time of H1N1 pan-demic. It also aimed to identify the main sources used for gathering information at each alert level. Methods: Two telephone surveys were conducted with a 4 month interval, at the beginning of H1N1 pandemic alert level 5 and 6, on 90 and 100 general practitioners, respectively. The knowledge of these physicians on the symptoms of H1N1 flu, the transmission methods, the preventative measures, and existing treatments along with the sources used for gathering information were assessed. Results: While mass media was the main source of gathering informa-tion in the H1N1 pandemic alert level 5, more professional sources were used at the H1N1 pandemic alert level 6. Despite the acceptable improvement noted in the knowledge of the physicians during the two phases of the study, their understanding of the disease was believed to be less than the expected level based on H1N1 pandemic alert level. Conclusions: The routine use of mass media as one of the main sources of information gathering at the two stages of the study points out its importance in providing physicians with the required informa-tion at the time of H1N1 pandemic. Using adequate, up-to-date, but non-specialized media can fill the gap in information gathering, re-quired for fighting pandemic.

  9. Post-destructive eye surgery, associated depression at Sekuru Kaguvi Hospital Eye Unit, Zimbabwe: Pilot Study

    Directory of Open Access Journals (Sweden)

    M. M. Kawome

    2013-12-01

    Full Text Available Destructive eye surgery is associated with more complications than just loss of visual functions of the eye and aesthetics. Currently there is very little published literature on post-destructive eye surgery associated depression. Zimbabwe has been experiencing a surge in the rate of destructive eye surgery done at the National Tertiary Eye Unit. This situation could be churning out lots of unrecognized depressed clients into the community who require assistance in one form or another. Objectives: To determine the prevalence of post-destructive eye surgery associated depression among patients attending Sekuru Kaguvi Hospital Eye Unit and assess if the current management protocol of patients undergoing destructive eye surgery at the Eye Unit addresses the problem adequately. Methods: A cross-sectional study of 28 randomly selected patients who had destructive eye surgeries at Sekuru Kaguvi Hospital was conducted over five months from 1st March 2012 to end of July 2012. A structured questionnaire containing 15 questions on the following items: gender, age, diagnosis, surgical procedure done, expectations before and after surgery, adequacy of counseling given and involvement of family was used to collect data. Nine questions to assess depression were adapted from the Patient Health Questionnaire (PHQ-9. Setting:  The study was conducted at SekuruKaguvi Hospital Eye Unit, Parirenyatwa Group of Hospitals in Harare. Results:  Twenty-eight patients who underwent destructive eye surgery during the study period were selected using systematic random sampling. The gender ratio was 1:1 and the mean age was 38.7 years with a range from 24 to 65 years. Fifty percent of the patients in the study had orbital exenteration while the rest had enucleation (14% and evisceration (36%. Twenty-eight percent of the study population had depression. Conclusion: Destructive eye surgery is frequently associated with depression and our current management protocol of

  10. 9 CFR 53.4 - Destruction of animals.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Destruction of animals. 53.4 Section 53.4 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF... animals. (a) Except as provided in paragraph (b) of this section, animals infected with or exposed to...

  11. NonDestructive Evaluation for Industrial & Development Applications

    Energy Technology Data Exchange (ETDEWEB)

    Hunter, James F. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-10-12

    Provide overview of weld inspection for Non-Destructive Testing at LANL. This includes radiography (RT/DR/CR/CT for x-ray & neutron sources), ultrasonic testing (UT/PAUT), dye penetrant inspection (PT), eddy current inspection (ET) and magnetic particle testing (MT). Facilities and capabilities for weld inspection will be summarized with examples.

  12. Destructive examination of the PVRC plates Nos. 50/52, 51/53 and 204

    International Nuclear Information System (INIS)

    1979-01-01

    The present document describes the destructive examination of the blocks required to obtain the precise and complete description of all the defects the NDT techniques were supposed to find, locate and size. This precise map of defects has to be used as the reference for the PISC trial results evaluation. The destructive examination was discontinued once NDT, conducted under very favourable conditions on small sections of the plate, was able to detect all defects larger than or equal to 1 mm in diameter, and also to size the defects when only one portion of the defect was visible after cutting. Complete destructive examination has therefore only been carried out on some sections, either when it was absolutely necessary, or in order to give illustrative examples. In order to avoid any doubt as to the original position of a defect, scrupulous attention has been paid to marking the specimen pieces at all stages of the destructive examination

  13. Gas chromatography with simultaneous detection: Ultraviolet spectroscopy, flame ionization, and mass spectrometry.

    Science.gov (United States)

    Gras, Ronda; Luong, Jim; Haddad, Paul R; Shellie, Robert A

    2018-05-08

    An effective analytical strategy was developed and implemented to exploit the synergy derived from three different detector classes for gas chromatography, namely ultraviolet spectroscopy, flame ionization, and mass spectrometry for volatile compound analysis. This strategy was achieved by successfully hyphenating a user-selectable multi-wavelength diode array detector featuring a positive temperature coefficient thermistor as an isothermal heater to a gas chromatograph. By exploiting the non-destructive nature of the diode array detector, the effluent from the detector was split to two parallel detectors; namely a quadrupole mass spectrometer and a flame ionization detector. This multi-hyphenated configuration with the use of three detectors is a powerful approach not only for selective detection enhancement but also for improvement in structural elucidation of volatile compounds where fewer fragments can be obtained or for isomeric compound analysis. With the diode array detector capable of generating high resolution gas phase spectra, the information collected provides useful confirmatory information without a total dependence on the chromatographic separation process which is based on retention time. This information-rich approach to chromatography is achieved without incurring extra analytical time, resulting in improvements in compound identification accuracy, analytical productivity, and cost. Chromatographic performance obtained from model compounds was found to be acceptable with a relative standard deviation of the retention times of less than 0.01% RSD, and a repeatability at two levels of concentration of 100 and 1000 ppm (v/v) of less than 5% (n = 10). With this configuration, correlation of data between the three detectors was simplified by having near identical retention times for the analytes studied. Copyright © 2018 Elsevier B.V. All rights reserved.

  14. Radioisotopes in non-destructive testing

    International Nuclear Information System (INIS)

    Domanus, J.C.

    1976-12-01

    After defining nondestructive testing (NDT) and comparing this concept with destructive testing, a short description is given of NDT methods other than radiologic. The basic concepts of radiologic methods are discussed and the principles of radiography are explained. Radiation sources and gamma radiography machines are next reviewed and radiographic inspection of weldings and castings is described. A brief description is given of the radiographic darkroom and accessories. Other radioisotope methods, such as neutron radiography, are shortly reviewed. Cost estimations for radioisotopic equipment conclude the report. (author)

  15. Political economy of climate change, ecological destruction and uneven development

    International Nuclear Information System (INIS)

    O'Hara, Phillip Anthony

    2009-01-01

    The purpose of this paper is to analyze climate change and ecological destruction through the prism of the core general principles of political economy. The paper starts with the principle of historical specificity, and the various waves of climate change through successive cooler and warmer periods on planet Earth, including the most recent climate change escalation through the open circuit associated with the treadmill of production. Then we scrutinize the principle of contradiction associated with the disembedded economy, social costs, entropy and destructive creation. The principle of uneven development is then explored through core-periphery dynamics, ecologically unequal exchange, metabolic rift and asymmetric global (in)justice. The principles of circular and cumulative causation (CCC) and uncertainty are then related to climate change dynamics through non-linear transformations, complex interaction of dominant variables, and threshold effects. Climate change and ecological destruction are impacting on most areas, especially the periphery, earlier and more intensely than previously thought likely. A political economy approach to climate change is able to enrich the analysis of ecological economics and put many critical themes in a broad context. (author)

  16. Ultrasonic destruction of albumin microbubbles enhances gene transfection and expression in cardiac myocytes.

    Science.gov (United States)

    Wang, Guo-zhong; Liu, Jing-hua; Lü, Shu-zheng; Lü, Yun; Guo, Cheng-jun; Zhao, Dong-hui; Fang, Dong-ping; He, Dong-fang; Zhou, Yuan; Ge, Chang-jiang

    2011-05-01

    It has been proven that ultrasonic destruction of microbubbles can enhance gene transfection efficiency into the noncardiac cells, but there are few reports about cardiac myocytes. Moreover, the exact mechanisms are not yet clear; whether the characteristic of microbubbles can affect the gene transfection efficiency or not is still controversial. This study was designed to investigate whether the ultrasound destruction of gene-loaded microbubbles could enhance the plasmids carried reporter gene transfection in primary cultured myocardial cell, and evaluate the effects of microbubbles characteristics on the transgene expression in cardiac myocytes. The β-galactosidase plasmids attached to the two types of microbubbles, air-contained sonicated dextrose albumin (ASDA) and perfluoropropane-exposed sonicated dextrose albumin (PESDA) were prepared. The gene transfection into cardiac myocytes was performed in vitro by naked plasmids, ultrasound exposure, ultrasonic destruction of gene-loaded microbubbles and calcium phosphate precipitation, and then the gene expression and cell viability were analyzed. The ultrasonic destruction of gene-loaded microbubbles enhanced gene expression in cardiac myocytes compared with naked plasmid transfection ((51.95 ± 2.41) U/g or (29.28 ± 3.65) U/g vs. (0.84 ± 0.21) U/g, P ASDA ((51.95 ± 2.41) U/g vs. (29.28 ± 3.65) U/g, P < 0.05). Ultrasonic destruction of microbubbles during calcium phosphate precipitation gene transfection enhanced β-galactosidase activity nearly 8-fold compared with calcium phosphate precipitation gene transfection alone ((111.35 ± 11.21) U/g protein vs. (14.13 ± 2.58) U/g protein, P < 0.01). Even 6 hours after calcium phosphate precipitation gene transfection, ultrasound-mediated microbubbles destruction resulted in more intense gene expression ((35.63 ± 7.65) U/g vs. (14.13 ± 2.58) U/g, P < 0.05). Ultrasonic destruction of microbubbles might be a promising method for the delivery of non-viral DNA into

  17. Computerized tomography diagnosis of cartilage destruction in carcinoma of the larynx

    International Nuclear Information System (INIS)

    Kawashima, Osamu; Tomizawa, Yoshio; Yasuoka, Yoshihito; Kamei, Tamio

    1991-01-01

    In 20 cases of laryngeal carcinoma, the pre-operative computerized tomography (CT) films were correlated with the macroscopic appearance of specimens obtained at the time of surgery. A correct diagnosis of cartilage destruction was made by pre-operative CT in 75% of cases in which the thyroid cartilage was involved and in about 79% of those with either arytenoid or cricoid cartilage involvement. A comparison between the pathological findings and the pre-operative CT findings in 9 cases of laryngeal carcinoma with destruction of the thyroid cartilage revealed several pathological changes which may lead to an incorrect CT diagnosis. These changes include microscopic infiltration; destruction of cartilage at the anterior commisure; tumor advance to sites of ossification, especially infiltration into ossifying cartilage located between two areas of non-ossifying cartilage; and infiltration of the tumor within the cartilage with preservation of the perichondrium. (author)

  18. 31 CFR 328.8 - Loss, theft, or destruction of securities bearing restrictive endorsements.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Loss, theft, or destruction of securities bearing restrictive endorsements. 328.8 Section 328.8 Money and Finance: Treasury Regulations... DEBT RESTRICTIVE ENDORSEMENTS OF U.S. BEARER SECURITIES § 328.8 Loss, theft, or destruction of...

  19. Advanced uses of radiation in non-destructive evaluation

    International Nuclear Information System (INIS)

    Baldev Raj; Viswanathan, B.; Venkataraman, B.

    1998-01-01

    The increasing demand for newer materials and stringency of specifications, have expanded the scope of advanced uses of radiation in non-destructive evaluation of materials and industrial components. This paper highlights the application of some of the advanced techniques of radiography and residual stress measurements, using x-ray diffraction, for materials characterisation and testing, based on the results obtained at the author's laboratory. The application of positron annihilation techniques based on the use of radioisotopes and high resolution gamma ray spectroscopy, is introduced as non-destructive tools for materials characterisation. Selective examples of significant results obtained using this technique, on the radiation damage and early stages of fatigue damage in technologically important steels are reviewed from recent works at the author's laboratory and elsewhere. The scope of application of charge particle based thin layer activation method is briefly outlined. (author)

  20. Destruction of pigments and lipids in isolated chloroplasts under the effect of visible radiation

    International Nuclear Information System (INIS)

    Merzlyak, M.N.; Pogosyan, S.I.

    1988-01-01

    The results of experiments on the effect of light radiation on lipid and pigment destruction in isolated chloroplasts are generalized. Substrates and products of oxidation destruction of lipid and pigments, the role of photosynthetic electron transport in photodestruction, the participation of activated oxygen and free-radical intermediate forms in it are considered. The role of antioxidants, carotenoids and enzymatic systems in protection of chloroplast membranes from destructive light effect is discussed. A general scheme of possible ways of photodestruction in chloroplasts is presented. 53 refs

  1. Longitudinal Relations Between Constructive and Destructive Conflict and Couples’ Sleep

    Science.gov (United States)

    El-Sheikh, Mona; Koss, Kalsea J.; Kelly, Ryan J.; Rauer, Amy J.

    2016-01-01

    We examined longitudinal relations between interpartner constructive (negotiation) and destructive (psychological and physical aggression) conflict strategies and couples’ sleep over 1 year. Toward explicating processes of effects, we assessed the intervening role of internalizing symptoms in associations between conflict tactics and couples’ sleep. Participants were 135 cohabiting couples (M age = 37 years for women and 39 years for men). The sample included a large representation of couples exposed to economic adversity. Further, 68% were European American and the remainder were primarily African American. At Time 1 (T1), couples reported on their conflict and their mental health (depression, anxiety). At T1 and Time 2, sleep was examined objectively with actigraphs for 7 nights. Three sleep parameters were derived: efficiency, minutes, and latency. Actor–partner interdependence models indicated that husbands’ use of constructive conflict forecasted increases in their own sleep efficiency as well as their own and their wives’ sleep duration over time. Actor and partner effects emerged, and husbands’ and wives’ use of destructive conflict strategies generally predicted worsening of some sleep parameters over time. Several mediation and intervening effects were observed for destructive conflict strategies. Some of these relations reveal that destructive conflict is associated with internalizing symptoms, which in turn are associated with some sleep parameters longitudinally. These findings build on a small, albeit growing, literature linking sleep with marital functioning, and illustrate that consideration of relationship processes including constructive conflict holds promise for gaining a better understanding of factors that influence the sleep of men and women. PMID:25915089

  2. Longitudinal relations between constructive and destructive conflict and couples' sleep.

    Science.gov (United States)

    El-Sheikh, Mona; Kelly, Ryan J; Koss, Kalsea J; Rauer, Amy J

    2015-06-01

    We examined longitudinal relations between interpartner constructive (negotiation) and destructive (psychological and physical aggression) conflict strategies and couples' sleep over 1 year. Toward explicating processes of effects, we assessed the intervening role of internalizing symptoms in associations between conflict tactics and couples' sleep. Participants were 135 cohabiting couples (M age = 37 years for women and 39 years for men). The sample included a large representation of couples exposed to economic adversity. Further, 68% were European American and the remainder were primarily African American. At Time 1 (T1), couples reported on their conflict and their mental health (depression, anxiety). At T1 and Time 2, sleep was examined objectively with actigraphs for 7 nights. Three sleep parameters were derived: efficiency, minutes, and latency. Actor-partner interdependence models indicated that husbands' use of constructive conflict forecasted increases in their own sleep efficiency as well as their own and their wives' sleep duration over time. Actor and partner effects emerged, and husbands' and wives' use of destructive conflict strategies generally predicted worsening of some sleep parameters over time. Several mediation and intervening effects were observed for destructive conflict strategies. Some of these relations reveal that destructive conflict is associated with internalizing symptoms, which in turn are associated with some sleep parameters longitudinally. These findings build on a small, albeit growing, literature linking sleep with marital functioning, and illustrate that consideration of relationship processes including constructive conflict holds promise for gaining a better understanding of factors that influence the sleep of men and women. (c) 2015 APA, all rights reserved).

  3. Non-destructive study of iron gall inks in manuscripts

    Science.gov (United States)

    Duh, Jelena; Krstić, Dragica; Desnica, Vladan; Fazinić, Stjepko

    2018-02-01

    The aim of this research is to establish an effective procedure of iron gall ink characterization using complementary non-destructive methods. By this, it is possible to better understand correlation of chemical composition of the inks and the state of preservation of iron gall ink manuscripts, as well as the effects of conservation treatment performed upon them. This study was undertaken on a bound 16th century manuscript comprised of different types of paper and ink from the National and University Library in Zagreb. Analytical methods used included Particle Induced X-ray Emission (PIXE) and X-ray Fluorescence (XRF). Paper fibers were identified by optical microscopy and the degradation state, as well as ink differentiation, transit metal migrations and detection of stains, with ultraviolet (UV) and infrared (IR) photography. The techniques applied on original writing materials gave important information about paper and ink composition, its preservation state and efficiency of conservation treatment performed upon them.

  4. Advanced combustion and oxidation techniques for the destruction of hazardous wastes

    International Nuclear Information System (INIS)

    Coogan, J.J.; Anderson, G.K.; Heck, H.G.; Kang, M.; McCulla, W.H.; Rosocha, L.A.

    1992-01-01

    Silent discharge plasmas (SDP) have been demonstrated in the laboratory to be effective in destroying hazardous organic compounds, particularly halocarbons. These compact systems offer an alternative to existing incineration or post-incineration treatments, with the potential for closed-loop operation and millisecond response times. When combined with a packed bed precombustor, SDP allows both liquid and gaseous based waste streams to be treated with high destruction efficiencies. In stand-alone tests of the SDP reactor, gaseous influents containing 1000 ppm TCE (trichloroethylene) were reduced to below 100 ppb effluent. Other halocarbon solvents such as CCl 4 (carbon tetrachloride) and TCA (trichloroethane) have also been treated. The measured figures of merit, electrical energy per mass of removed chemical, are 10's of kW-hr/kg for much-gt 99% removal of TCE and 100's of kW-hr/kg for 90% removal of CCl 4 , both being for a non-optimized system. Future designs are projected to reduce toxic levels below 10 ppb, with high overall efficiencies

  5. Evaluation of nitrate destruction methods

    International Nuclear Information System (INIS)

    Taylor, P.A.; Kurath, D.E.; Guenther, R.

    1993-01-01

    A wide variety of high nitrate-concentration aqueous mixed [radioactive and Resource Conservation and Recovery Act (RCRA) hazardous] wastes are stored at various US Department of Energy (DOE) facilities. These wastes will ultimately be solidified for final disposal, although the waste acceptance criteria for the final waste form is still being determined. Because the nitrates in the wastes will normally increase the volume or reduce the integrity of all of the waste forms under consideration for final disposal, nitrate destruction before solidification of the waste will generally be beneficial. This report describes and evaluates various technologies that could be used to destroy the nitrates in the stored wastes. This work was funded by the Department of Energy's Office of Technology Development, through the Chemical/Physical Technology Support Group of the Mixed Waste Integrated Program. All the nitrate destruction technologies will require further development work before a facility could be designed and built to treat the majority of the stored wastes. Several of the technologies have particularly attractive features: the nitrate to ammonia and ceramic (NAC) process produces an insoluble waste form with a significant volume reduction, electrochemical reduction destroys nitrates without any chemical addition, and the hydrothermal process can simultaneously treat nitrates and organics in both acidic and alkaline wastes. These three technologies have been tested using lab-scale equipment and surrogate solutions. At their current state of development, it is not possible to predict which process will be the most beneficial for a particular waste stream

  6. Sensitivity analysis of exergy destruction in a real combined cycle power plant based on advanced exergy method

    International Nuclear Information System (INIS)

    Boyaghchi, Fateme Ahmadi; Molaie, Hanieh

    2015-01-01

    Highlights: • The advanced exergy destruction components of a real CCPP are calculated. • The TIT and r c variation are investigated on exergy destruction parts of the cycle. • The TIT and r c growth increase the improvement potential in the most of components. • The TIT and r c growth decrease the unavoidable part in some components. - Abstract: The advanced exergy analysis extends engineering knowledge beyond the respective conventional methods by improving the design and operation of energy conversion systems. In advanced exergy analysis, the exergy destruction is splitting into endogenous/exogenous and avoidable/unavoidable parts. In this study, an advanced exergy analysis of a real combined cycle power plant (CCPP) with supplementary firing is done. The endogenous/exogenous irreversibilities of each component as well as their combination with avoidable/unavoidable irreversibilities are determined. A parametric study is presented discussing the sensitivity of various performance indicators to the turbine inlet temperature (TIT), and compressor pressure ratio (r c ). It is observed that the thermal and exergy efficiencies increase when TIT and r c rise. Results show that combustion chamber (CC) concentrates most of the exergy destruction (more than 62%), dominantly in unavoidable endogenous form which is decreased by 11.89% and 13.12% while the avoidable endogenous exergy destruction increase and is multiplied by the factors of 1.3 and 8.6 with increasing TIT and r c , respectively. In addition, TIT growth strongly increases the endogenous avoidable exergy destruction in high pressure superheater (HP.SUP), CC and low pressure evaporator (LP.EVAP). It, also, increases the exogenous avoidable exergy destruction of HP.SUP and low pressure steam turbine (LP.ST) and leads to the high decrement in the endogenous exergy destruction of the preheater (PRE) by about 98.8%. Furthermore, r c growth extremely rises the endogenous avoidable exergy destruction of gas

  7. Metabolic self-destruction in critically ill patients: origins, mechanisms and therapeutic principles.

    Science.gov (United States)

    Hartl, Wolfgang H; Jauch, Karl-Walter

    2014-03-01

    The aim of this study was to describe the evolution and nature of self-destructive metabolic responses observed in critically ill patients, and to analyze therapeutic principles on how best to avoid or diminish these responses. We electronically identified articles through a search of PubMed and Google Scholar. Metabolic reactions associated with surgical injury or infections comprise hyperglycemia, insulin resistance, increased hepatic glucose production, and muscle protein breakdown. From an evolutionary perspective, these responses have been necessary and successful to overcome spontaneously survivable insults (minor surgical trauma). If prolonged and exaggerated, however, these reactions may become self-destructive, causing secondary metabolic damage. There is overwhelming evidence that extreme metabolic responses have not been selected by evolution, but are brought about by modern medicine enabling survival of severe, otherwise lethal insults and giving patients the chance to develop such exaggerated self-destructive metabolic reactions. Poorly adapted metabolic responses to severe insults, however, may have persisted because of unavoidable evolutionary constraints. Self-destructive metabolic responses cannot be prevented by adjuvant therapies such as artificial nutrition, which may only help to ameliorate secondary metabolic damage. Minor surgical trauma is associated with a beneficial adaptive metabolic response. After a severe insult, however, emergence of self-destructive responses will be unavoidable if the patient survives the acute phase. Effective treatment is only possible by an aggressive therapy of underlying pathologies (such as shock, trauma or infection) thereby interrupting secondary metabolic trigger mechanisms at an early stage. Copyright © 2014 Elsevier Inc. All rights reserved.

  8. Mass-dependent and non-mass-dependent isotope effects in ozone photolysis: Resolving theory and experiments

    International Nuclear Information System (INIS)

    Cole, Amanda S.; Boering, Kristie A.

    2006-01-01

    In addition to the anomalous 17 O and 18 O isotope effects in the three-body ozone formation reaction O+O 2 +M, isotope effects in the destruction of ozone by photolysis may also play a role in determining the isotopic composition of ozone and other trace gases in the atmosphere. While previous experiments on ozone photolysis at 254 nm were interpreted as evidence for preferential loss of light ozone that is anomalous (or 'non-mass-dependent'), recent semiempirical theoretical calculations predicted a preferential loss of heavy ozone at that wavelength that is mass dependent. Through photochemical modeling results presented here, we resolve this apparent contradiction between experiment and theory. Specifically, we show that the formation of ozone during the UV photolysis experiments is not negligible, as had been assumed, and that the well-known non-mass-dependent isotope effects in ozone formation can account for the non-mass-dependent enrichment of the heavy isotopologs of ozone observed in the experiment. Thus, no unusual non-mass-dependent fractionation in ozone photolysis must be invoked to explain the experimental results. Furthermore, we show that theoretical predictions of a mass-dependent preferential loss of the heavy isotopologs of ozone during UV photolysis are not inconsistent with the experimental data, particularly if mass-dependent isotope effects in the chemical loss reactions of ozone during the photolysis experiments or experimental artifacts enrich the remaining ozone in 17 O and 18 O. Before the calculated fractionation factors can be quantitatively evaluated, however, further investigation of possible mass-dependent isotope effects in the reactions of ozone with O( 1 D), O( 3 P), O 2 ( 1 Δ), and O 2 ( 1 Σ) is needed through experiments we suggest here

  9. THEORETICAL AND EXPERIMENTAL ASPECTS OF PLASTIC DEFORMATION AND DESTRUCTION OF ROCKS

    OpenAIRE

    A. V. Zhabko

    2018-01-01

    The urgency of the problem. The main process in mining is the process of destruction of rocks, so the establishment of laws and criteria for plastic deformation and destruction of rocks is the most important and fundamental object. Purpose of the work. The work is devoted to the establishment of laws of plastic deformation of rocks (solids). Methods of research. Analytical and experimental research methods are widely used in this work. Results. On the basis of the earlier studies, wh...

  10. The role of Monte Carlo burnup calculations in quantifying plutonium mass in spent fuel assemblies with non-destructive assay

    Energy Technology Data Exchange (ETDEWEB)

    Galloway, Jack D.; Tobin, Stephen J.; Trellue, Holly R.; Fensin, Michael L. [Los Alamos National Laboratory, Los Alamos, (United States)

    2011-12-15

    The Next Generation Safeguards Initiate (NGSI) of the United States Department of Energy has funded a multi-laboratory/university collaboration to quantify plutonium content in spent fuel (SF) with non-destructive assay (NDA) techniques and quantify the capability of these NDA techniques to detect pin diversions from SF assemblies. The first Monte Carlo based spent fuel library (SFL) developed for the NGSI program contained information for 64 different types of SF assemblies (four initial enrichments, burnups, and cooling times). The maximum amount of fission products allowed to still model a 17x17 Westinghouse pressurized water reactor (PWR) fuel assembly with four regions per fuel pin was modelled. The number of fission products tracked was limited by the available memory. Studies have since indicated that additional fission product inclusion and asymmetric burning of the assembly is desired. Thus, an updated SFL has been developed using an enhanced version of MCNPX, more powerful computing resources, and the Monte Carlo-based burnup code Monteburns, which links MCNPX to a depletion code and models a representative 1 Division-Slash 8 core geometry containing one region per fuel pin in the assemblies of interest, including a majority of the fission products with available cross sections. Often in safeguards, the limiting factor in the accuracy of NDA instruments is the quality of the working standard used in calibration. In the case of SF this is anticipated to also be true, particularly for several of the neutron techniques. The fissile isotopes of interest are co-mingled with neutron absorbers that alter the measured count rate. This paper will quantify how well working standards can be generated for PWR spent fuel assemblies and also describe the spatial plutonium distribution across an assembly. More specifically we will demonstrate how Monte Carlo gamma measurement simulations and a Monte Carlo burnup code can be used to characterize the emitted gamma

  11. Destructive Examination of Shipping Package 9975-02019

    Energy Technology Data Exchange (ETDEWEB)

    Daugherty, W. L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-06-13

    Destructive and non-destructive examinations have been performed on the components of shipping package 9975-02019 as part of a comprehensive SRS surveillance program for plutonium material stored in the K-Area Complex (KAC). During the field surveillance inspection of this package in KAC, two non-conforming conditions were noted: the axial gap of 1.577 inch exceeded the 1 inch maximum criterion, and two areas of dried glue residue were noted on the upper fiberboard subassembly. This package was subsequently transferred to SRNL for more detailed inspection and destructive examination. In addition to the conditions noted in KAC, the following conditions were noted: - Numerous small spots of corrosion were observed along the bottom edge of the drum. - In addition to the smeared glue residue on the upper fiberboard subassembly, there was also a small dark stain. - Mold was present on the side and bottom of the lower fiberboard subassembly. Dark stains from elevated moisture content were also present in these areas. - A dark spot with possible light corrosion was observed on the primary containment vessel flange, and corresponding rub marks were observed on the secondary containment vessel ID. - The fiberboard thermal conductivity in the radial orientation was above the specified range. When the test was repeated with slightly lower moisture content, the result was acceptable. The moisture content for both tests was within a range typical of other packages in storage. The observed conditions must be fully evaluated by KAC to ensure the safety function of the package is being maintained. Several factors can contribute to the concentration of moisture in the fiberboard, including higher than average initial moisture content, higher internal temperature (due to internal heat load and placement within the array of packages), and the creation of additional moisture as the fiberboard begins to degrade.

  12. 7 CFR 1779.73 - Replacement of loss, theft, destruction, mutilation, or defacement of Loan Note Guarantee or...

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false Replacement of loss, theft, destruction, mutilation..., theft, destruction, mutilation, or defacement of Loan Note Guarantee or Assignment Guarantee Agreement... circumstances of the loss, theft, or destruction of the Loan Note Guarantee or Assignment Guarantee Agreement...

  13. Organization of measures on protection of population and territories against weapons of mass destruction: brief analysis of laboratory control and conditions of personnel protective means of respiratory organs in the Republic of Tajikistan; Organizatsiya meropriyatiy po zashite naseleniya i territoriy ot oruzhiya massovogo unichtozheniya; kratkiy analiz laborotornogo kotrolya i sostoyaniya sredstv individual'noy zashiti organov dikhaniya v Respublike Tadzhikistan

    Energy Technology Data Exchange (ETDEWEB)

    Kamalov, D. D.; Makhmadov, T. F.; Stotskiy, D. F. [Committee of Emergency Situations and Civil Defence under the Government of the Republic of Tajikistan, Dushanbe (Tajikistan)

    2010-07-01

    Full text: Changing of character of acts of terrorism in the end of 20 and the beginning of 21 centuries specifies the increased interest of the terrorist organizations to the weapons of mass destruction. The most accessible are the biological and chemical weapons, as well as the self-made {sup d}irty{sup e}xplosive devices filled with a radioactive material. Application by terrorists of the nuclear weapon at the present is not actual. A nuclear ammunition is under the intensive control not only of the state-possessor of the nuclear weapon, but also all world community. Benefit of use of mass destruction weapons by the terrorist organizations is depended of accessibility of combat chemical or biological substances, easiness of their manufacture, a small amount of poisoning and biological substances necessary for use in the closed space, availability of influence on the big areas, psychological pressure upon the world community. The most known incidents related with use of chemical or biological substances were: - 1992 (chemical) - neo nazis attacked synagogue using cyanide, Germany - 1993 (chemical) - cyanide inside the bomb exploded in the World Trade Center, USA - 1994 (chemical) - use of sarin in Matsumoto, Japan led to the death of 8 and hospitalization of 200 people - 1995 (chemical) - again sarin used in Tokyo metro, 12 people died and 5 500 injured - 1995 (chemical) - FBI agents prevented the attack with the use of sarin of Disney land - 1995 (chemical) - attack in Japan with use of cyanide, phosgene and pepper gas - 1995 (biological) - a member of 'Aryan nation' was arrested for ordering a pestilence virus. - 1995 (radiological) - a terrorist organization of Chechnya republic placed a 14 kilo pack filled with a radioactive cesium-137 and explosives in a Moscow park - 1997 (chemical) - 2 attacks of the trading centers with a use of chlor bombs in Japan. The facts mentioned above put before the Republic of Tajikistan objectives of organization of actions for

  14. Non-destructive testing; Examenes no destructivos

    Energy Technology Data Exchange (ETDEWEB)

    Calva, Mauricio; Loske, Achim [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1988-12-31

    The application of non-destructive testing (NDT) in several technical and industrial fields is pointed out, standing out its utilization in the detection of future failures without affecting the examined element. Likewise, the different types of NDTs and their processes, such as x-rays, ultrasoud, magnetic particles, induced currents, penetrating fluids, and optical means, are described. The Non-Destructive Tests Laboratory of the Instituto de Investigaciones Electricas (IIE), plans to create new and more reliable systems independent from the operator`s capacity, to contribute to fulfill the inspection and quality control needs of the generating Mexican power plants. [Espanol] Se senala la aplicacion de los examenes no destructivos (END) a diversos campos tecnicos e industriales, destacando su utilizacion en la deteccion de futuras fallas sin afectar el elemento examinado. Asimismo, se describen los diferentes tipos de END y sus procesos, tales como radiografia, ultrasonido, particulas magneticas, corrientes inducidas, liquidos penetrantes y metodos opticos. El Laboratorio de Pruebas no Destructivas, del Instituto de Investigaciones Electricas (IIE), planea crear sistemas novedosos mas confiables, que no dependan de la capacidad del operador, para contribuir a satisfacer las necesidades de inspeccion y control de calidad que se presentan en las plantas generadoras de energia mexicanas.

  15. Non-destructive testing; Examenes no destructivos

    Energy Technology Data Exchange (ETDEWEB)

    Calva, Mauricio; Loske, Achim [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1987-12-31

    The application of non-destructive testing (NDT) in several technical and industrial fields is pointed out, standing out its utilization in the detection of future failures without affecting the examined element. Likewise, the different types of NDTs and their processes, such as x-rays, ultrasoud, magnetic particles, induced currents, penetrating fluids, and optical means, are described. The Non-Destructive Tests Laboratory of the Instituto de Investigaciones Electricas (IIE), plans to create new and more reliable systems independent from the operator`s capacity, to contribute to fulfill the inspection and quality control needs of the generating Mexican power plants. [Espanol] Se senala la aplicacion de los examenes no destructivos (END) a diversos campos tecnicos e industriales, destacando su utilizacion en la deteccion de futuras fallas sin afectar el elemento examinado. Asimismo, se describen los diferentes tipos de END y sus procesos, tales como radiografia, ultrasonido, particulas magneticas, corrientes inducidas, liquidos penetrantes y metodos opticos. El Laboratorio de Pruebas no Destructivas, del Instituto de Investigaciones Electricas (IIE), planea crear sistemas novedosos mas confiables, que no dependan de la capacidad del operador, para contribuir a satisfacer las necesidades de inspeccion y control de calidad que se presentan en las plantas generadoras de energia mexicanas.

  16. Mass Media’s Perspective on the Challenges of Information and Communication Technology (ICT) in Indonesia

    Science.gov (United States)

    Junaidi

    2017-12-01

    This study investigated the challenges of Information and Communication Technology (ICT) in Indonesia based on mass media’s perspective. The challenges of ICT on mass media’s perspective are very complex. Some of these challenges include the consideration of the advantages and disadvantages of ICT, threats to the unity of the country, cultural problems, regulation, business competition among operators, Pokemon Go booming, the existence of social media which triggers hostility between people and the increasing rate of the interconnection cost. Among the main reasons to this phenomenon is a need of massive investment to build the infrastructures. This study used Robert N. Entman framing model to analyze the headlines of Majalah ICT (an ICT magazine).

  17. Dose concept of oncological hyperthermia: Heat-equation considering the cell destruction

    Directory of Open Access Journals (Sweden)

    Szasz A

    2006-01-01

    Full Text Available We shall assume, of course, that the objective of hyperthermia is to destroy the malignant cells. Destruction definitely needs energy. Description and quality assurance of hyperthermia use the Pennes heat equation to describe the processes. However the energy balance of the Pennes-equation does not contain the hyperthermic cell-destruction energy, which is a mandatory factor of the process. We propose a generalization of the Pennes-equation, inducing the entire energy balance. The new paradigm could be a theoretical basis of the till now empirical dose-construction for oncological hyperthermia. The cell destruction is a non-equilibrium thermodynamical process, described by the equations of chemical reactions. The dynamic behavior (time dependence has to be considered in this approach. We are going to define also a dose concept that can be objectively compared with other oncological methods. We show how such empirical dose as CEM43oC could be based theoretically as well.

  18. S.S. Annunziata Church (L'Aquila, Italy) unveiled by non- and micro-destructive testing techniques

    Science.gov (United States)

    Sfarra, Stefano; Cheilakou, Eleni; Theodorakeas, Panagiotis; Paoletti, Domenica; Koui, Maria

    2017-03-01

    The present research work explores the potential of an integrated inspection methodology, combining Non-destructive testing and micro-destructive analytical techniques, for both the structural assessment of the S.S. Annunziata Church located in Roio Colle (L'Aquila, Italy) and the characterization of its wall paintings' pigments. The study started by applying passive thermal imaging for the structural monitoring of the church before and after the application of a consolidation treatment, while active thermal imaging was further used for assessing this consolidation procedure. After the earthquake of 2009, which seriously damaged the city of L'Aquila and its surroundings, part of the internal plaster fell off revealing the presence of an ancient mural painting that was subsequently investigated by means of a combined analytical approach involving portable VIS-NIR fiber optics diffuse reflectance spectroscopy (FORS) and laboratory methods, such as environmental scanning electron microscopy (ESEM) coupled with energy dispersive X-ray analysis (EDX), and attenuated total reflectance-fourier transform infrared spectroscopy (ATR-FTIR). The results obtained from the thermographic analysis provided information concerning the two different constrictive phases of the Church, enabled the assessment of the consolidation treatment, and contributed to the detection of localized problems mainly related to the rising damp phenomenon and to biological attack. In addition, the results obtained from the combined analytical approach allowed the identification of the wall painting pigments (red and yellow ochre, green earth, and smalt) and provided information on the binding media and the painting technique possibly applied by the artist. From the results of the present study, it is possible to conclude that the joint use of the above stated methods into an integrated methodology can produce the complete set of useful information required for the planning of the Church's restoration

  19. MiRTE: Mixed Reality Triage and Evacuation game for Mass Casualty information systems design, testing and training.

    Science.gov (United States)

    Yu, Xunyi; Ganz, Aura

    2011-01-01

    In this paper we introduce a Mixed Reality Triage and Evacuation game, MiRTE, that is used in the development, testing and training of Mass Casualty Incident (MCI) information systems for first responders. Using the Source game engine from Valve software, MiRTE creates immersive virtual environments to simulate various incident scenarios, and enables interactions between multiple players/first responders. What distinguishes it from a pure computer simulation game is that it can interface with external mass casualty incident management systems, such as DIORAMA. The game will enable system developers to specify technical requirements of underlying technology, and test different alternatives of design. After the information system hardware and software are completed, the game can simulate various algorithms such as localization technologies, and interface with an actual user interface on PCs and Smartphones. We implemented and tested the game with the DIORAMA system.

  20. Secure Retrieval of FFTF Testing, Design, and Operating Information

    International Nuclear Information System (INIS)

    Butner, R. Scott; Wootan, David W.; Omberg, Ronald P.; Makenas, Bruce J.; Nielsen, Deborah

    2009-01-01

    . Accomplishments include secure retrieval of: more than 400 boxes of FFTF information, several hundred microfilm reels including Clinch River Breeder Reactor (CRBR) information, and 40 boxes of information on the Fuels and Materials Examination Facility (FMEF). All information preserved to date is now being stored and categorized consistent with the IAEA international standardized taxonomy. Earlier information largely related to irradiation testing is likewise being categorized. The fuel test results information exists in several different formats depending upon the final stage of the test evaluation. In some cases there is information from both non-destructive and destructive examination while in other cases only non-destructive results are available. Non-destructive information would include disassembly records, dimensional profilometry, gamma spectrometry, and neutron radiography. Information from destructive examinations would include fission gas analysis, metallography, and photomicrographs. Archiving of FFTF data, including both the reactor plant and the fuel test information, is being performed in coordination with other data archiving efforts underway under the aegis of the AFCI program. In addition to the FFTF efforts, archiving of data from the EBR-II reactor is being carried out by INL. All material at risk associated with FFTF documentation has been secured in a timely manner consistent with the stated plan. This documentation is now being categorized consistent with internationally agreed upon IAEA standards. Documents are being converted to electronic format for transfer to a large searchable electronic database being developed by INL. In addition, selected FFTF information is being used to generate test cases for large-scale simulation modeling efforts and for providing Design Data Need (DDN) packages as requested by the AFCI program.

  1. 7 CFR 3575.73 - Replacement of loss, theft, destruction, mutilation, or defacement of Loan Note Guarantee or...

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Replacement of loss, theft, destruction, mutilation... AGRICULTURE GENERAL Community Programs Guaranteed Loans § 3575.73 Replacement of loss, theft, destruction... circumstances of the loss, theft, or destruction of the Loan Note Guarantee or Assignment Guarantee Agreement...

  2. Mathematical modelling of ultrasonic non-destructive evaluation

    Directory of Open Access Journals (Sweden)

    Larissa Ju Fradkin

    2001-01-01

    Full Text Available High-frequency asymptotics have been used at our Centre to develop codes for modelling pulse propagation and scattering in the near-field of the ultrasonic transducers used in NDE (Non-Destructive Evaluation, particularly of walls of nuclear reactors. The codes are hundreds of times faster than the direct numerical codes but no less accurate.

  3. Non-destructive controls in the mechanical industry

    Energy Technology Data Exchange (ETDEWEB)

    Jarlan, L

    1978-12-01

    The sequence of operations implicating the mechanical industries from the suppliers to their customers is briefly recalled; a description of the field of application of non-destructive control methods in these industries is given. Follows a description of some recent typical applications of the principal methods: radiography, ultrasonic waves, magnetism, acoustic emission, sonic control, tracer techniques.

  4. Non-destructive control in nuclear construction

    International Nuclear Information System (INIS)

    Banus; Barbier; Launay

    1978-01-01

    Having recalled the characteristics of the fundamental components of the main primary circuit of nuclear boilers (900 MW) and the means appropriated for their control, it is recalled that the 'French Electricity Board's specifications and control rules' often prescribe more severe criteria than those existing in the U.S.A. Then practical examples of non-destructive controls concerning the steam generator end plates, vessel stainless steel linings, pump attachements, steam generator pipes are given [fr

  5. On the systems of automatic non-destructive control of NPP metallic structures

    International Nuclear Information System (INIS)

    Grebennik, V.S.; Lantukh, V.M.

    1980-01-01

    The main stages of developing automatic systems of non- destructive control (NC) of NPP metallic structures are pointed out. The main requirements for automatic NC systems are formulated. Recommendations on the use of the developed experimental automatic facilities for control of certain NPP components are given. It is noted that the present facilities may be used in the future in development of modular sets of non-destructive control systems [ru

  6. GALAXY MERGERS AND DARK MATTER HALO MERGERS IN ΛCDM: MASS, REDSHIFT, AND MASS-RATIO DEPENDENCE

    International Nuclear Information System (INIS)

    Stewart, Kyle R.; Bullock, James S.; Barton, Elizabeth J.; Wechsler, Risa H.

    2009-01-01

    We employ a high-resolution ΛCDM N-body simulation to present merger rate predictions for dark matter (DM) halos and investigate how common merger-related observables for galaxies-such as close pair counts, starburst counts, and the morphologically disturbed fraction-likely scale with luminosity, stellar mass, merger mass ratio, and redshift from z = 0 to z = 4. We investigate both rate at which subhalos first enter the virial radius of a larger halo (the 'infall rate'), and the rate at which subhalos become destroyed, losing 90% of the mass they had at infall (the d estruction rate ) . For both merger rate definitions, we provide a simple 'universal' fitting formula that describes our derived merger rates for DM halos a function of dark halo mass, merger mass ratio, and redshift, and go on to predict galaxy merger rates using number density matching to associate halos with galaxies. For example, we find that the instantaneous (destruction) merger rate of m/M > 0.3 mass-ratio events into typical L ∼> f L * galaxies follows the simple relation dN/dt ≅ 0.03(1 + f) Gyr -1 (1 + z) 2.1 . Despite the rapid increase in merger rate with redshift, only a small fraction of >0.4 L * high-redshift galaxies (∼3% at z = 2) should have experienced a major merger (m/M > 0.3) in the very recent past (t 0.3) in the previous 700 Myr and conclude that mergers almost certainly play an important role in delivering baryons and influencing the kinematic properties of Lyman break galaxies (LBGs).

  7. Combined Mechanical Destruction and Alkaline Pretreatment of Wheat Straw for Enhanced Enzymatic Saccharification

    Directory of Open Access Journals (Sweden)

    Qianqian Wang

    2014-09-01

    Full Text Available Wheat straw was pretreated by combined mechanical destruction and alkaline pretreatments to enhance enzymatic saccharification. Four strategies were employed to evaluate the potential of wheat straw as a feedstock for fermentable sugar production. The effects of the pretreatments on the substrate morphology, size distribution, chemical composition, and cellulose crystallinity, along with the subsequent enzymatic digestibility, were investigated. Optical microscope images showed that mechanical pretreatment alone resulted in poor fiber defibrillation, wherein samples mostly consisted of rigid fiber bundles, while integrated mechanical destruction and alkaline pretreatment led to relatively good fiber defibrillation. Low temperature NaOH/urea pretreatment can fibrillate the rigid fiber bundles into a relatively loose network and alter the structure of the treated substrate to make cellulose more accessible. The glucan conversion rates were 77% and 95% for integrated mechanical destruction and alkaline pretreatments and mechanical destruction followed by low temperature NaOH/urea and ammonium/urea pretreatments, respectively, after 72 h of enzymatic hydrolysis with enzyme loadings of 10 FPU cellulase per g of oven-dry substrate.

  8. Saving ourselves from self-destruction. Op-ed essay, published in the New York Times

    International Nuclear Information System (INIS)

    ElBaradei, M.

    2004-01-01

    Full text: Nuclear proliferation is on the rise. Equipment, material and training were once largely inaccessible. Today, however, there is a sophisticated worldwide network that can deliver systems for producing material usable in weapons. The demand clearly exists: countries remain interested in the illicit acquisition of weapons of mass destruction. If we sit idly by, this trend will continue. Countries that perceive themselves to be vulnerable can be expected to try to redress that vulnerability - and in some cases they will pursue clandestine weapons programs. The supply network will grow, making it easier to acquire nuclear weapon expertise and materials. Eventually, inevitably, terrorists will gain access to such materials and technology, if not actual weapons. If the world does not change course, we risk self-destruction. Common sense and recent experience make clear that the Nuclear Non-Proliferation Treaty, which has served us well since 1970, must be tailored to fit 21st-century realities. Without threatening national sovereignty, we can toughen the Non-Proliferation regime. The first step is to tighten controls over the export of nuclear material, a priority President Bush identified yesterday in his speech on nuclear non-proliferation. The current system relies on a gentlemen's agreement that is not only non-binding, but also limited in its membership: it does not include many countries with growing industrial capacity. And even some members fail to control the exports of companies unaffiliated with government enterprise. We must universalize the export control system, remove these loopholes, and enact binding, treaty-based controls - while preserving the rights of all States to peaceful nuclear technology. We should also criminalize the acts of people who seek to assist others in proliferation. In parallel, inspectors must be empowered. Much effort was recently expended - and rightly so - in persuading Iran and Libya to give the International Atomic

  9. Experimental investigations of nonlinearities and destruction mechanisms of an experimental phospholipid-based ultrasound contrast agent.

    Science.gov (United States)

    Casciaro, Sergio; Palmizio Errico, Rosa; Errico, Rosa Palmizio; Conversano, Francesco; Demitri, Christian; Distante, Alessandro

    2007-02-01

    We sought to characterize the acoustical behavior of the experimental ultrasound contrast agent BR14 by determining the acoustic pressure threshold above which nonlinear oscillation becomes significant and investigating microbubble destruction mechanisms. We used a custom-designed in vitro setup to conduct broadband attenuation measurements at 3.5 MHz varying acoustic pressure (range, 50-190 kPa). We also performed granulometric analyses on contrast agent solutions to accurately measure microbubble size distribution and to evaluate insonification effects. Attenuation did not depend on acoustic pressure less than 100 kPa, indicating this pressure as the threshold for the appearance of microbubble nonlinear behavior. At the lowest excitation amplitude, attenuation increased during insonification, while, at higher excitation levels, the attenuation decreased over time, indicating microbubble destruction. The destruction rate changed with pressure amplitude suggesting different destruction mechanisms, as it was confirmed by granulometric analysis. Microbubbles showed a linear behavior until 100 kPa, whereas beyond this value significant nonlinearities occurred. Observed destruction phenomena seem to be mainly due to gas diffusion and bubble fragmentation mechanisms.

  10. Unsteady exergy destruction of the neuron under dynamic stress conditions

    International Nuclear Information System (INIS)

    Genc, S.; Sorguven, E.; Ozilgen, M.; Aksan Kurnaz, I.

    2013-01-01

    Just like all physical systems, biological systems also obey laws of thermodynamics, and as such the useful work potential of a biological system is its exergy. In some studies, exergy of living systems is considered with respect to work performance of humans in offices or buildings; however the exergy analysis of biochemical reactions in a cell as a closed system goes largely untouched. In this study, exergy analysis was applied to glucose metabolism of a model neuron, and dynamic exergy destructions were calculated for four different conditions, namely normoxia, hypoxia, glucose starvation and excess glucose. Our results showed that neuronal metabolism achieved a new steady state under each condition within 5 min. This dynamic model predicts that, both exergy destruction and work potential rates increase with increasing blood glucose concentration. The ratio of exergy destruction rate to work potential rate increases logarithmically with increasing blood glucose concentration. The neuronal metabolism is thus found to function in an efficient way and switches to lower exergy destruction under stress conditions such as glucose starvation. This behavior seen in this exergy analysis study confirms the assumption of minimum entropy production in living systems. - Highlights: • Unsteady exergy analysis of glucose metabolism of a model neuron is performed. • Dynamic exergy losses were calculated for four different conditions: normoxia, hypoxia, glucose starvation and excess glucose. • Neuronal metabolism achieved a new steady state under each condition within 5 min. • Both exergy loss and work potential rates increase with increasing blood glucose concentration. • Neuronal metabolism functions in an efficient way and switches to lower exergy loss under stress conditions

  11. Estimation of nuclear destruction in high energy nucleus-nucleus interactions

    International Nuclear Information System (INIS)

    Uzhinskij, V.V.

    1995-01-01

    It is assumed that: 1) a projectile particle invokes into target nucleus a cascade of quark-gluon exchanges; 2) the nucleons involved in the cascade are ejected from the nucleus which leads to the nuclear destruction. On these bases a simple model to estimate the nuclear destruction at the fast stage of the interaction is proposed. The allowed region of the model parameters is determined at the proton-emulsion high-energy interaction data analysis: an analysis of gold interactions with nuclei at an energy of 600 MeV/nucleon fixes the parameter values. The distributions on the energy in zero degree calorimeter (T ZDC ) in the interactions of Si+Al, Cu, Pb (14 GeV/nucleon) and Au+Au (10 GeV/nucleon) calculated in the framework of the model and in the cascade-evaporation model (CEM) are presented. The proposed model describes the nuclear destruction at intermediate and high energies better than CEM does. The estimation of the average values of impact parameter and the number of intra-nuclear collisions for Au+Au interactions in the events with different T ZDC is given. 34 refs., 11 figs

  12. 31 CFR 309.12 - Relief on account of loss, theft or destruction, etc.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Relief on account of loss, theft or... BILLS § 309.12 Relief on account of loss, theft or destruction, etc. (a) Relief on account of the loss, theft, destruction, mutilation or defacement of Treasury bills may be given only under the authority of...

  13. Binomial probability distribution model-based protein identification algorithm for tandem mass spectrometry utilizing peak intensity information.

    Science.gov (United States)

    Xiao, Chuan-Le; Chen, Xiao-Zhou; Du, Yang-Li; Sun, Xuesong; Zhang, Gong; He, Qing-Yu

    2013-01-04

    Mass spectrometry has become one of the most important technologies in proteomic analysis. Tandem mass spectrometry (LC-MS/MS) is a major tool for the analysis of peptide mixtures from protein samples. The key step of MS data processing is the identification of peptides from experimental spectra by searching public sequence databases. Although a number of algorithms to identify peptides from MS/MS data have been already proposed, e.g. Sequest, OMSSA, X!Tandem, Mascot, etc., they are mainly based on statistical models considering only peak-matches between experimental and theoretical spectra, but not peak intensity information. Moreover, different algorithms gave different results from the same MS data, implying their probable incompleteness and questionable reproducibility. We developed a novel peptide identification algorithm, ProVerB, based on a binomial probability distribution model of protein tandem mass spectrometry combined with a new scoring function, making full use of peak intensity information and, thus, enhancing the ability of identification. Compared with Mascot, Sequest, and SQID, ProVerB identified significantly more peptides from LC-MS/MS data sets than the current algorithms at 1% False Discovery Rate (FDR) and provided more confident peptide identifications. ProVerB is also compatible with various platforms and experimental data sets, showing its robustness and versatility. The open-source program ProVerB is available at http://bioinformatics.jnu.edu.cn/software/proverb/ .

  14. Containment nuclear plant structures evaluation by non destructive testing: strategy and results

    OpenAIRE

    GARNIER, Vincent; HENAULT, Jean-Marie; HAFID, Hamid; VERDIER, Jérôme; CHAIX, Jean François; ABRAHAM, Odile; SBARTAÏ, Zoubir Medhi; BALAYSSAC, Jean Pierre; PIWAKOWSKI, Bogdan; VILLAIN, Géraldine; DEROBERT, Xavier; PAYAN, Cédric; RAKOTONARIVO, Sandrine; LAROSE, Eric; SOGBOSSI, Hognon

    2016-01-01

    Containment nuclear plants structures are an ultimate barrier in the event of an accident. Mechanical resistance and tightness are the two functions that they are expected to provide. To evaluate their capacity to perform them, destructive testing cannot be used to characterize the material. Non-Destructive Tests then represent a relevant solution to test concrete and the struc- ture. The article positions NDT within the context of containment structures supervision and maintenance, and prese...

  15. Destruction of Toluene by the Combination of High Frequency Discharge Electrodeless Lamp and Manganese Oxide-Impregnated Granular Activated Carbon Catalyst

    Directory of Open Access Journals (Sweden)

    Jianhui Xu

    2014-01-01

    Full Text Available The destruction of low concentration of toluene (0–30 ppm has been studied under the UV/photogenerated O3/MnO2-impregnated granular activated carbon (MnO2-impregnated GAC process by the combination of self-made high frequency discharge electrodeless lamp (HFDEL with MnO2-impregnated GAC catalyst. Experimental results showed that the initial toluene concentration can strongly affect the concentration of photogenerated O3 from HFDEL and the efficiency and mass rate of destruction of toluene via HFDEL/MnO2-impregnated GAC system. Active oxygen and hydroxyl radicals generated from HFDEL/MnO2-impregnated GAC system played a key role in the decomposition of toluene process and the intermediates formed by photolysis are more prone to be mineralized by the subsequent MnO2-impregnated GAC catalyst compared to the original toluene, resulting in synergistic mineralization of toluene by HFDEL/MnO2-impregnated GAC system. The role of MnO2-impregnated GAC catalyst is not only to eliminate the residual O3 completely but also to enhance the decomposition and mineralization of toluene.

  16. Edward's sword? - A non-destructive study of a medieval king's sword

    Science.gov (United States)

    Segebade, Chr.

    2013-04-01

    Non-destructive and instrumental methods including photon activation analysis were applied in an examination of an ancient sword. It was tried to find indication of forgery or, if authentic, any later processing and alteration. Metal components of the hilt and the blade were analysed by instrumental photon activation. Non-destructive metallurgical studies (hardness measurements, microscopic microstructure analysis) are briefly described, too. The results of these investigations did not yield indication of non-authenticity. This stood in agreement with the results of stylistic and scientific studies by weapon experts.

  17. Development of non-destructive testing. Turkey

    International Nuclear Information System (INIS)

    1991-01-01

    A National Scheme for the qualification and certification of Non-Destructive Testing (NDT) personnel in various methods has been established as the first stage of implementation. Systematic training in such methods as radiography (RT), ultrasonics (UT), magnetic particles (MT), liquid penetrant (PT) and eddy currents (ET) at levels I, II and some at III has been initiated and should be continued. Direct link with the industry and continuous effort to extend practical applications is strongly recommended

  18. Multifactorial aspects of antibody-mediated blood cell destruction

    NARCIS (Netherlands)

    Kapur, R.

    2014-01-01

    The research described in this thesis focuses on diseases of antibody-mediated blood cell destruction via FcγRs on phagocytes, in particular regarding platelets in fetal or neonatal alloimmune thrombocytopenia (FNAIT) and red blood cells (RBC) in hemolytic disease of the fetus and newborn (HDFN).

  19. Non-destructive testing: significant facts

    International Nuclear Information System (INIS)

    Espejo, Hector; Ruch, Marta C.

    2006-01-01

    In the last fifty years different organisations, both public and private, have been assigned to the mission of introducing into the country the most relevant aspects of the modern technological discipline 'Non Destructive Testing' (NDT) through a manifold of activities, such as training and education, research, development, technical assistance and services, personnel qualification/certification and standardisation. A review is given of the significant facts in this process, in which the Argentine Atomic Energy Commission, CNEA, played a leading part, a balance of the accomplishments is made and a forecast of the future of the activity is sketched. (author) [es

  20. Creative destruction and export patterns

    DEFF Research Database (Denmark)

    Hansen, Jørgen Drud; Kvedaras, Virmantas; Nielsen, Jørgen Ulff-Møller

    2014-01-01

    varieties obsolete. For a given technology (variety) production costs decrease after an infant period due to learning. While all firms are assumed to be symmetric in a life-cycle perspective, at a given point in time firms of different ages differ in productivity, firm size, product quality, and export...... behavior. The model highlights a process of creative destruction, which allows firms to produce in a finite span of periods determined by the intensity of product and process innovations. The model predicts a wide range of export behavior of the individual firm during its life cycle depending...

  1. Creative Destruction in Libraries: Designing our Future

    Directory of Open Access Journals (Sweden)

    Caro Pinto

    2013-11-01

    Full Text Available In Brief: Joseph Schumpeter defines creative destruction as a “process of industrial mutation that incessantly revolutionizes the economic structure from within, incessantly destroying the old one, incessantly creating a new one.” As libraries struggle with how to position themselves to thrive in the digital age, how can we balance the traditional elements of librarianship like […

  2. Utilization of radiation in non destructive tests

    International Nuclear Information System (INIS)

    Lopes, R.T.; Jesus, E.F.O. de; Junqueira, M.M.; Matos, J.A. de; Castello Branco, L.M.; Barros Junior, J.D.; Borges, J.C.

    1987-01-01

    The Nuclear Instrumentation Laboratory from COPPE/UFRJ has been developed techniques for using nuclear radiations to obtain images for non-destructive materials testing and medicine. With this objective, some prototypes of transmission computerized tomography systems using parallel beans and fan beans, with computer automation, including the mathematical process of image reprocessing and presentation in videos or printers are constructed [pt

  3. Non destructive testing of green parts in powder metallurgy

    International Nuclear Information System (INIS)

    Accary, A.

    1979-01-01

    The non destructive testing of green parts is potentially advantageous by making possible a lowering of the material and energy consumption as well as the production of parts with a 100% reliability. After a survey of the possible methods and of the defects to be detected it is shown that the goal can be achieved using a 'blind detection' method and that the difficulty of the problem depends on the size and shape of the part to be controled. The gravimetric, dimensional, γ absorption and thermal diffusivity methods are then examined. It is concluded that a unit control is paying only if it allows to enter the high reliability part market. Used statisticaly the non destructive testing of green parts can possibly lead to savings on materials and energy [fr

  4. Mass Mentality, Culture Industry, Fascism

    Directory of Open Access Journals (Sweden)

    Saladdin Said Ahmed

    2008-06-01

    Full Text Available Some fashionable leftist movements and populist intellectuals habitually blame the sources of information for public ignorance about the miserable state of the world. It could be argued, however, that the masses are ignorant because they prefer ignorance. A mass individual is politically apathetic and intellectually lazy. As a result, even when huge amounts of information are available, which is the case in this epoch, the masses insist on choosing ignorance. It is true that there is not enough information about what has happened in a place such as Darfur, but the masses choose not to access even the amount of information that is available. The great majority of people in China, Iran, and America, despite the fact that they have varying amounts of access to various types of "knowledge," still tend to be misinformed. It seems that a mass individual is curious only about what directly affects his/her own personal life. I will explore the connection between mass mentality and the culture industry in order to capture the essential role of the former in the latter. I will also argue that a mass individual is the source of fascism although fascism as a phenomenon needs a mass culture in which to flourish.

  5. Grain Destruction in a Supernova Remnant Shock Wave

    Science.gov (United States)

    Raymond, John C.; Ghavamian, Parviz; Williams, Brian J.; Blair, William P.; Borkowski, Kazimierz J.; Gaetz, Terrance J.; Sankrit, Ravi

    2014-01-01

    Dust grains are sputtered away in the hot gas behind shock fronts in supernova remnants, gradually enriching the gas phase with refractory elements. We have measured emission in C IV (lambda)1550 from C atoms sputtered from dust in the gas behind a non-radiative shock wave in the northern Cygnus Loop. Overall, the intensity observed behind the shock agrees approximately with predictions from model calculations that match the Spitzer 24 micron and the X-ray intensity profiles. Thus these observations confirm the overall picture of dust destruction in SNR shocks and the sputtering rates used in models. However, there is a discrepancy in that the CIV intensity 10'' behind the shock is too high compared to the intensities at the shock and 25'' behind it. Variations in the density, hydrogen neutral fraction and the dust properties over parsec scales in the pre- shock medium limit our ability to test dust destruction models in detail.

  6. Synchrotron radiation microtomography of musical instruments: a non-destructive monitoring technique for insect infestations

    Directory of Open Access Journals (Sweden)

    Beatrice Bentivoglio-Ravasio

    2011-08-01

    Full Text Available X-ray computed tomography is becoming a common technique for the structural analysis of samples of cultural relevance, providing luthiers, art historians, conservators and restorators with a unique tool for the characterization of musical instruments. Synchrotron-radiation phase-contrast microtomography is an ideal technique for the non-destructive 3D analysis of samples where small lowabsorbing details such as larvae and eggs can be detected. We report results from the first feasibility studies performed at the Elettra synchrotron laboratory, where the 1494 organ by Lorenzo Gusnasco da Pavia has been studied. Together with important information about the structural conditions, the presence of xylophages could be detected and characterized.

  7. Review of international developments and cooperation on Risk-Informed In-Service-Inspection (RI-ISI) and Non-destructive Testing (NDT) Qualification in OECD-NEA member countries- Responses to the questionnaire - CSNI/integrity and ageing working group

    International Nuclear Information System (INIS)

    2005-01-01

    In December 2000, the Committee on Nuclear Regulatory Activities (CNRA) and the Committee on the Safety of Nuclear Installations (CSNI) agreed to prepare a state-of-the art report addressing the present situation and regulatory aspects in NEA member countries on: - Risk based / risk informed in-service inspections (ISI) developments, - Qualification of NDT system to be used for the inspections. The CSNI gave mandate to the CSNI working group on the Integrity of Components and Structures (IAGE) to prepare the report. In order to get a good basis for compiling the report with an overview on the present situation in OECD countries and regulatory aspects on the further developments of RI-ISI and NDT qualification approaches a questionnaire was prepared. This questionnaire was organised in two parts. The first part addressed used risk based / risk informed ISI approaches and regulatory aspects on the further developments. The second part addressed used NDT qualification approaches and other measures for getting reliable inspection results as well as regulatory aspects on the further developments of qualification approaches. Some parts of the questionnaire addressed topics, which have been dealt with in other European or national programs. Available relevant information from these programs has been also collected. The questionnaire was circulated in 2003 among NEA member countries organisations. Appendix 1 contains the questionnaire. Appendix 2 contains the compilation of responses to the questionnaire. A workshop was organized to complement the questionnaire (NEA/CSNI/R(2004)9 Proceedings of the CSNI Workshop on 'International developments and cooperation on Risk-Informed In-Service- Inspection (RI-ISI) and Non-destructive Testing (NDT) Qualification' held in Stockholm, Sweden on 13-14 April 2004 and hosted by SKI). In addition to regulators, licensees, manufacturers and researchers, this workshop gathered international organisations (i.e. EC, IAEA) and the main

  8. Theoretical approach to the destruction or sterilization of drugs in aqueous solution

    International Nuclear Information System (INIS)

    Slegers, Catherine; Tilquin, Bernard

    2005-01-01

    Two novel applications in the radiation processing of aqueous solutions of drugs are the sterilization of injectable drugs and the decontamination of hospital wastewaters by ionizing radiation. The parameters influencing the destruction of the drug in aqueous solutions are studied with a computer simulation program. This theoretical approach has revealed that the dose rate is the most important parameter that can be easily varied in order to optimize the destruction or the protection of the drug

  9. Destructive Leadership Behaviors and Workplace Attitudes in Schools

    Science.gov (United States)

    Woestman, Daniel S.; Wasonga, Teresa Akinyi

    2015-01-01

    The study investigated destructive leadership behaviors (DLBs) and their influence on K-12 workplace attitudes (subordinate consideration for leaving their job, job satisfaction, and levels of stress). Quantitative survey method was used to gather data from experienced professional educators. Analyses of data show that the practice of DLB exists…

  10. Optimizing the Treatment of Acute Duct-Destructive Pancreatitis

    Science.gov (United States)

    Zhakiev, Bazylbek S.; Karsakbayev, Uteugali G.; Kelimberdiev, Mersaid S.; ?uhamedgalieva, Bodagoz M.; K?nonenko, Aleksander F.

    2016-01-01

    The search for new methods for treating duct-destructive pancreatitis is a relevant problem. Endogenous intoxication and oxidative stress that accompany acute pancreatitis often progress even after surgery, which forces one to search for additional possibilities of preventing these severe consequences. This research studied the effect of small…

  11. Implications of Sensory Stimulation in Self-Destructive Behavior.

    Science.gov (United States)

    Edelson, Stephen M.

    1984-01-01

    The author extends the self stimulatory theory of self destructive behavior in autistic, schizophrenic, and mentally retarded individuals to suggest that damage of the skin's nerve structure lowers the tactile sensory threshold for physical input and enables individuals to obtain sensory stimulation by repeatedly depressing the damaged area. (CL)

  12. Non-destructive test of lock actuator component using neutron radiography technique

    International Nuclear Information System (INIS)

    Juliyanti; Setiawan; Sutiarso

    2012-01-01

    Non-destructive test of lock actuator using neutron radiography technique has been done. The lock actuator is a mechanical system which is controlled by central lock module consisting of electronic circuit which drives the lock actuator works accordingly to open and lock the vehicle door. The non-destructive test using neutron radiography is carried out to identify the type of defect is presence by comparing between the broken and the brand new one. The method used to test the lock actuator component is film method (direct method). The result show that the radiography procedure has complied with the ASTM standard for neutron radiography with background density of 2.2, 7 lines and 3 holes was seen in the sensitivity indicator (SI) and the quite good image quality was obtained. In the brand new actuator is seen that isolator part which separated the coils has melted. By this non-destructive test using neutron radiography technique is able to detect in early stage the type of component's defect inside the lock actuator without to dismantle it. (author)

  13. Options for the destruction of chemical weapons and management of the associated risks.

    Science.gov (United States)

    Manley, Ron G

    2006-09-01

    The destruction of chemical weapons is a hazardous operation. The degree of hazard posed, however, is not uniform and is dependent on the specific chemical agent and the configuration of the weapon or bulk storage vessel in which it is contained. For example, a highly volatile nerve agent in an explosively configured munition, such as a rocket, poses a very different hazard from that of a bulk storage container of viscous mustard gas. Equally the handling of recovered, often highly corroded, World War (WW)I or WWII chemical munitions will pose a very different hazard from that associated with dealing with modern chemical weapons stored under the appropriate conditions. Over the years, a number of technologies have been developed for the destruction of chemical weapons. Each has its advantages and disadvantages. None of them provide a universal solution to the problem. When assessing options for the destruction of these weapons and the management of the associated risks, therefore, it is important to give due consideration and weight to these differences. To ensure that the destruction technology selected takes due account of them and that the resulting overall risk assessment accurately reflects the actual risks involved.

  14. Rapidly Destructive Inflammatory Arthritis of the Hip

    Directory of Open Access Journals (Sweden)

    Jenny Shu

    2014-01-01

    Full Text Available Rapidly destructive coxarthrosis (RDC is a rare syndrome that involves aggressive hip joint destruction within 6–12 months of symptom onset with no single diagnostic laboratory, pathological, or radiographic finding. We report an original case of RDC as an initial presentation of seronegative rheumatoid arthritis (RA in a 57-year-old Caucasian woman presenting with 6 months of progressive right groin pain and no preceding trauma or chronic steroid use. Over 5 months, she was unable to ambulate and plain films showed complete resorption of the right femoral head and erosion of the acetabulum. There were inflammatory features seen on computed tomography (CT and magnetic resonance imaging (MRI. She required a right total hip arthroplasty, but arthritis in other joints showed improvement with triple disease modifying antirheumatic drugs (DMARD therapy and almost complete remission with the addition of adalimumab. We contrast our case of RDC as an initial presentation of RA to 8 RDC case reports of patients with established RA. Furthermore, this case highlights the importance of obtaining serial imaging to evaluate a patient with persistent hip symptoms and rapid functional deterioration.

  15. A non-destructive method for quantifying small-diameter woody biomass in southern pine forests

    Science.gov (United States)

    D. Andrew Scott; Rick Stagg; Morris Smith

    2006-01-01

    Quantifying the impact of silvicultural treatments on woody understory vegetation largely has been accomplished by destructive sampling or through estimates of frequency and coverage. In studies where repeated measures of understory biomass across large areas are needed, destructive sampling and percent cover estimates are not satisfactory. For example, estimates of...

  16. RESOLVE AND ECO: THE HALO MASS-DEPENDENT SHAPE OF GALAXY STELLAR AND BARYONIC MASS FUNCTIONS

    Energy Technology Data Exchange (ETDEWEB)

    Eckert, Kathleen D.; Kannappan, Sheila J.; Stark, David V.; Moffett, Amanda J.; Norris, Mark A. [Department of Physics and Astronomy, University of North Carolina, 141 Chapman Hall CB 3255, Chapel Hill, NC 27599 (United States); Berlind, Andreas A., E-mail: keckert@physics.unc.edu [International Centre for Radio Astronomy Research (ICRAR), The University of Western Australia, 35 Stirling Highway, Crawley, WA 6009 (Australia)

    2016-06-20

    In this work, we present galaxy stellar and baryonic (stars plus cold gas) mass functions (SMF and BMF) and their halo mass dependence for two volume-limited data sets. The first, RESOLVE-B, coincides with the Stripe 82 footprint and is extremely complete down to baryonic mass M {sub bary} ∼ 10{sup 9.1} M {sub ⊙}, probing the gas-rich dwarf regime below M {sub bary} ∼ 10{sup 10} M {sub ⊙}. The second, ECO, covers a ∼40× larger volume (containing RESOLVE-A) and is complete to M {sub bary} ∼ 10{sup 9.4} M {sub ⊙}. To construct the SMF and BMF we implement a new “cross-bin sampling” technique with Monte Carlo sampling from the full likelihood distributions of stellar or baryonic mass. Our SMFs exhibit the “plateau” feature starting below M {sub star} ∼ 10{sup 10} M {sub ⊙} that has been described in prior work. However, the BMF fills in this feature and rises as a straight power law below ∼10{sup 10} M {sub ⊙}, as gas-dominated galaxies become the majority of the population. Nonetheless, the low-mass slope of the BMF is not as steep as that of the theoretical dark matter halo MF. Moreover, we assign group halo masses by abundance matching, finding that the SMF and BMF, separated into four physically motivated halo mass regimes, reveal complex structure underlying the simple shape of the overall MFs. In particular, the satellite MFs are depressed below the central galaxy MF “humps” in groups with mass <10{sup 13.5} M {sub ⊙} yet rise steeply in clusters. Our results suggest that satellite destruction and stripping are active from the point of nascent group formation. We show that the key role of groups in shaping MFs enables reconstruction of a given survey’s SMF or BMF based on its group halo mass distribution.

  17. Non-destructive methods of control of thermo-physical properties of fuel rods

    International Nuclear Information System (INIS)

    Kruglov, A B; Kruglov, V B; Kharitonov, V S; Struchalin, P G; Galkin, A G

    2017-01-01

    Information about the change of thermal properties of the fuel elements needed for a successful and safe operation of the nuclear power plant. At present, the existing amount of information on the fuel thermal conductivity change and “fuel-shell” thermal resistance is insufficient. Also, there is no technique that would allow for the measurement of these properties on the non-destructive way of irradiated fuel elements. We propose a method of measuring the thermal conductivity of the fuel in the fuel element and the contact thermal resistance between the fuel and the shell without damaging the integrity of the fuel element, which is based on laser flash method. The description of the experimental setup, implementing methodology, experiments scheme. The results of test experiments on mock-ups of the fuel elements and their comparison with reference data, as well as the results of numerical modeling of thermal processes that occur during the measurement. Displaying harmonization of numerical calculation with the experimental thermograms layout shell portions of the fuel cell, confirming the correctness of the calculation model. (paper)

  18. Scaling of silent electrical discharge reactors for hazardous organics destruction

    International Nuclear Information System (INIS)

    Coogan, J.J.; Rosocha, L.A.; Brower, M.J.; Kang, M.; Schmidt, C.A.

    1993-01-01

    Silent electrical discharges are used to produce highly reactive free radicals that destroy hazardous compounds entrained in gaseous effluents at ambient gas temperatures and pressures. We have carried out destruction experiments at Los Alamos on a range of volatile organic compounds (VOCs), including trichloroethylene (TCE), carbon tetrachloride, perchloroethylene (PCE), and chlorofluorocarbons (CFCs). We have measured a ''nine-factor'', the amount of energy required to reduce the VOC concentration by a factor of ten. For practical reactor power densities, the ''nine-factor'' can be used to predict the destruction an removal efficiency (DRE) in terms of gas flow rate and the number of reactor modules. This report proposes a modular, stackable architecture for scaling up the reactor throughput

  19. Destruction kinetic of PCDDs/Fs in MSWI fly ash using microwave peroxide oxidation.

    Science.gov (United States)

    Chang, Yu-Min; Fang, Wen-Bin; Tsai, Kuo-Sheng; Kao, Jimmy C M; Lin, Kae-Long; Chen, Ching-Ho

    2015-01-01

    Microwave peroxide oxidation is a less greenhouse gas emission and energy-efficient technology to destroy toxic organic compounds in hazardous waste. The research novelty is to adopt the innovative microwave peroxide oxidation in H2SO4/HNO3 solution to efficiently destroy the polychlorinated dibenzo-p-dioxins (PCDDs)/Fs in municipal solid waste incineration fly ash. The major objective of this paper is to study dynamic destruction of PCDDs/Fs using the microwave peroxide oxidation. Almost all PCDDs/Fs in the raw fly ash can be destructed in 120 min at a temperature of 423 K using the microwave peroxide oxidation treatment. It was found that the microwave peroxide oxidation provides the potential to destruct the PCDDs/Fs content in municipal solid waste incinerator (MSWI) fly ash to a low level as a function of treatment time. A useful kinetic correlation between destruction efficiency and treatment conditions is proposed on the basis of the experimental data obtained in this study. The significance of this work in terms of practical engineering applications is that the necessary minimum treatment time can be solved using a proposed graphic illustration method, by which the minimum treatment time is obtained if the desired destruction efficiency and treatment temperature are known. Because of inorganic salt dissolution, the temperature would be a critical factor facilitating the parts of fly ash dissolution. Material loss problem caused by the microwave peroxide oxidation and the effects of treatment time and temperature are also discussed in this paper.

  20. Influence of flow variability on floodplain formation and destruction, Little Missouri River, North Dakota

    Science.gov (United States)

    Miller, J.R.; Friedman, J.M.

    2009-01-01

    Resolving observations of channel change into separate planimetric measurements of floodplain formation and destruction reveals distinct relations between these processes and the flow regime. We analyzed a time sequence of eight bottomland images from 1939 to 2003 along the Little Missouri River, North Dakota, to relate geomorphic floodplain change to flow along this largely unregulated river. At the decadal scale, floodplain formation and destruction varied independently. Destruction was strongly positively correlated with the magnitude of infrequent high flows that recur every 5-10 yr, whereas floodplain formation was negatively correlated with the magnitude of frequent low flows exceeded 80% of the time. At the century scale, however, a climatically induced decrease in peak flows has reduced the destruction rate, limiting the area made available for floodplain formation. The rate of destruction was not uniform across the floodplain. Younger surfaces were consistently destroyed at a higher rate than older surfaces, suggesting that throughput of contaminants would have occurred more rapidly than predicted by models that assume uniform residence time of sediment across the floodplain. Maps of floodplain ages produced by analysis of sequential floodplain images are similar to maps of forest ages produced through dendrochronology, confirming the assumption of dendrogeomorphic studies that riparian tree establishment in this system is limited to recent channel locations. ?? 2009 Geological Society of America.

  1. Evaluation of corrosion of prestressing steel in concrete using non-destructive techniques

    International Nuclear Information System (INIS)

    Ali, M.G.; Maddocks, A.R.

    2003-01-01

    Use of high strength steel in pre-stressed concrete structures has been in use in Australia for many decades. Highway bridges, among other structures, have extensively used pre-stress-ing and post-tensioning techniques. Although prestressing offers many competitive edges to it's traditional rival reinforced concrete, the consequence of damage to prestressing tendons could be catastrophic. Periodic visual inspections of prestressed concrete bridges throughout the world have demonstrated the growing problem of deterioration of prestressing steel as a result of corrosion. Early detection of damage to prestressing steel therefore is of paramount importance. Unfortunately no reliable and practical non-destructive evaluation technique has been available for assessing the condition of prestressing steel within concrete although a number of techniques appear promising. The following inspection methods have been highlighted in recent literature for their use as non-destructive inspection methods for prestressed concrete structures. In addition to the techniques discussed, a number of destructive, or invasive techniques also exist for determination of the corrosion status of prestressing tendons in prestressed structures. The following non-destructive techniques are discussed in some detail: Radiography; Computed Tomography; Surface Penetrating Radar; Impact Echo; Acoustic Emission Monitoring; Magnetic Field Disturbance Technique; Remnant Magnetism Method; Linear Polarisation Method; Electrical Resistance and Surface Potential Survey. The portability, limitations and use in Australia of these techniques are summarised in a table

  2. Destruction of benzene (VOC) using electron beam radiation in flue gas treatment

    International Nuclear Information System (INIS)

    Mohd Nahar Othman; Mohd Noor Muhd Yunus

    2004-01-01

    In this study, Benzene, one of the volatile organic compounds (VOCs) is used to destruct by electron beam. As we know Benzene is one of the most stable compound and very difficult to break. By using the powerful energy produced by electron beam, the benzene compound can be broken up to form new compounds. The technique used in this experiment is by using static process in a control condition where other gases are not allowed to enter the Tedlar bag or glass jar. The Tedlar Bag and Glass jar are used as media for benzene gas to be irradiated. From the experiment it was found that the Tedlag Bag is more suitable than the glass jar the electron beam can easily penetrate and destroy benzene gas. Nitrogen and Helium gas is used as a cleaning gas. The concentrations of benzene gas used for this study are 100 ppm. (part per million), 1 ppmv, and 1 ppmv each for 32 types of VOC. From the result it can be concluded that the electron beam technique used for destruction of benzene (VOQ is very suitable for the low concentration of benzene, the dose needed for the destruction to reach 85-95% is only between 8-12 kGy. It was also observed that many new compound can be produced when benzene is destruct by electron beam. (Author)

  3. Thermal history sensors for non-destructive temperature measurements in harsh environments

    Energy Technology Data Exchange (ETDEWEB)

    Pilgrim, C. C. [Mechanical Engineering, Imperial College London, London, SW7 2AZ, UK and Sensor Coating Systems, Imperial Incubator, Bessemer Building, Level 1 and 2, Imperial College London, London SW7 2AZ (United Kingdom); Heyes, A. L. [Energy Technology and Innovation Initiative, University of Leeds, Leeds, LS2 9JT (United Kingdom); Feist, J. P. [Sensor Coating Systems, Imperial Incubator, Bessemer Building, Level 1 and 2, Imperial College London, London SW7 2AZ (United Kingdom)

    2014-02-18

    The operating temperature is a critical physical parameter in many engineering applications, however, can be very challenging to measure in certain environments, particularly when access is limited or on rotating components. A new quantitative non-destructive temperature measurement technique has been proposed which relies on thermally induced permanent changes in ceramic phosphors. This technique has several distinct advantages over current methods for many different applications. The robust ceramic material stores the temperature information allowing long term thermal exposures in harsh environment to be measured at a convenient time. Additionally, rare earth dopants make the ceramic phosphorescent so that the temperature information can be interpreted by automated interrogation of the phosphorescent light. This technique has been demonstrated by application of YAG doped with dysprosium and europium as coatings through the air-plasma spray process. Either material can be used to measure temperature over a wide range, namely between 300°C and 900°C. Furthermore, results show that the material records the peak exposure temperature and prolonged exposure at lower temperatures would have no effect on the temperature measurement. This indicates that these materials could be used to measure peak operating temperatures in long-term testing.

  4. Rapidly destructive osteoarthritis of the hip joint: a case series

    Directory of Open Access Journals (Sweden)

    McMurtrie A

    2008-01-01

    Full Text Available Abstract Background Rapidly destructive arthrosis of the hip is a rare and incompletely understood disorder with scarce literature about variations in natural history within a population. Methods A series of cases from North Wales with rapid progressive joint destruction and extensive subchondral bone loss in the femoral head and acetabulum are presented. Radiographic findings mimicked those of other disorders such as septic arthritis, rheumatoid and seronegative arthritis, primary osteonecrosis with secondary osteoarthritis, or neuropathic osteoarthropathy, but none of the patients had clinical, pathologic, or laboratory evidence of these entities. Results Rapid progression of hip pain and disability was a consistent clinical feature. The average duration of symptoms was 1.4 years. Radiographs obtained at various intervals before surgery (average 14 months in 18 patients documented rapid hip destruction, involvement being unilateral in 13 cases. All patients underwent total hip arthroplasty, and osteoarthritis was confirmed at pathologic examination. Conclusion The authors postulate that these cases represent an uncommon subset of osteoarthritis and regular review, both clinically and radiologically, are required to assess speed of progression and prevent rapid loss of bone stock without the surgeon being aware. These cases are unsuitable for being placed on long waiting list due to technical difficulties in delayed surgery and compromised outcome following surgery.

  5. Non-destructive controls in the steel tube industry

    International Nuclear Information System (INIS)

    Mondot, J.

    1978-01-01

    The main non-destructive control methods in the tube industry are reviewed: eddy currents, particularly well adapted to small tubes; magnetoscopic testing for weldless tubes; ultrasonic waves widely used for thick weldless tubes and weldings; radiography, to examine tube ends and the known questionable zones; measure of diameters by laser [fr

  6. Laser plasma X-ray for non-destructive inspection

    International Nuclear Information System (INIS)

    Yagi, T.; Kusama, H.

    1995-01-01

    External electric field is applied to the laser produced plasma, and its found that plasma shape in soft X-ray region is changed due to the penetrating electric field. The plasma emits strong hard X-ray, which can be used as a compact light source for non-destructive inspection. (author)

  7. Spina bifida and unilateral focal destruction of the distal femoral epiphysis

    Energy Technology Data Exchange (ETDEWEB)

    Wolverson, M.K.; Sundaram, M.; Graviss, E.R.

    1981-03-01

    Focal destruction of the postero-lateral distal femoral epiphysis was present on radiographs in two children with spina bifida and objective lower limb sensory loss. Each patient presented with painless swelling of the knee. In one patient the epiphysis showed sclerosis and fragmentation associated with a defect. In the second patient the destructive change was the dominant radiographic abnormality and simulated bone tumor. Computed tomography in this patient showed a bone fragment occupying the defect suggesting epiphyseal fracture. The lesions in each patient were believed to be traumatic in origin and to represent a stage in the development toward neuropathic arthropathy.

  8. Spina bifida and unilateral focal destruction of the distal femoral epiphysis

    International Nuclear Information System (INIS)

    Wolverson, M.K.; Sundaram, M.; Graviss, E.R.

    1981-01-01

    Focal destruction of the postero-lateral distal femoral epiphysis was present on radiographs in two children with spina bifida and objective lower limb sensory loss. Each patient presented with painless swelling of the knee. In one patient the epiphysis showed sclerosis and fragmentation associated with a defect. In the second patient the destructive change was the dominant radiographic abnormality and simulated bone tumor. Computed tomography in this patient showed a bone fragment occupying the defect suggesting epiphyseal fracture. The lesions in each patient was believed to be traumatic in origin and to represent a stage in the development toward neuropathic arthropathy. (orig.)

  9. Effects of Current Guides Destruction at Ultra-fast Acceleration of Macrobodies

    Science.gov (United States)

    Kataev, V. N.; Boriskin, A. S.; Golosov, S. N.; Demidov, V. A.; Klimashov, M. V.; Korolev, P. V.; Makartsev, G. F.; Pikar, A. S.; Russkov, A. S.; Shapovalov, E. V.; Shibitov, Yu. M.

    2006-08-01

    The paper is devoted to discussion of current guides destruction effects in different accelerators: thermal-electric and electro-magnetic rail accelerator at macrobodies acceleration value of 108-109 m/s2. Experimental results with thermal-electric accelerators powering from megajoule capacitor battery and helical magneto-cumulative generator MCG-100 at currents up to 3.5 MA are analyzed. The process of rails destruction at railgun at pressure magnetic field excess over the limit of metal fluidity is presented. Methods of efficiency coefficient increase of capacitive storage energy transmission to kinetic energy of accelerating body are discussed.

  10. Design and operational parameters of transportable supercritical water oxidation waste destruction unit

    International Nuclear Information System (INIS)

    McFarland, R.D.; Brewer, G.R.; Rofer, C.K.

    1991-12-01

    Supercritical water oxidation (SCWO) is the destruction of hazardous waste by oxidation in the presence of water at temperatures and pressures above its critical point. A 1 gal/h SCWO waste destruction unit (WDU) has been designed, built, and operated at Los Alamos National Laboratory. This unit is transportable and is intended to demonstrate the SCWO technology on wastes at Department of Energy sites. This report describes the design of the WDU and the preliminary testing phase leading to demonstration

  11. PANDA-A novel instrument for non-destructive sample analysis

    International Nuclear Information System (INIS)

    Turunen, Jani; Peraejaervi, Kari; Poellaenen, Roy; Toivonen, Harri

    2010-01-01

    An instrument known as PANDA (Particles And Non-Destructive Analysis) for non-destructive sample analysis has been designed and built at the Finnish Radiation and Nuclear Safety Authority (STUK). In PANDA the measurement techniques and instruments designed for the basic research are applied to the analysis of environmental samples. PANDA has two vacuum chambers, one for loading samples and the other for measurements. In the measurement chamber there are two individual measurement positions. Currently the first one hosts an HPGe gamma detector and a position-sensitive alpha detector. The second measurement position is intended for precise characterization of found particles. PANDA's data are recorded in event mode and events are timestamped. In the present article the technical design of PANDA is presented in detail. In addition, its performance using depleted uranium particles and an air filter is demonstrated.

  12. Fusion-Fission Transmutation Scheme-Efficient destruction of nuclear waste

    International Nuclear Information System (INIS)

    Kotschenreuther, M.; Valanju, P.M.; Mahajan, S.M.; Schneider, E.A.

    2009-01-01

    A fusion-assisted transmutation system for the destruction of transuranic nuclear waste is developed by combining a subcritical fusion-fission hybrid assembly uniquely equipped to burn the worst thermal nonfissile transuranic isotopes with a new fuel cycle that uses cheaper light water reactors for most of the transmutation. The center piece of this fuel cycle, the high power density compact fusion neutron source (100 MW, outer radius <3 m), is made possible by a new divertor with a heat-handling capacity five times that of the standard alternative. The number of hybrids needed to destroy a given amount of waste is an order of magnitude below the corresponding number of critical fast-spectrum reactors (FRs) as the latter cannot fully exploit the new fuel cycle. Also, the time needed for 99% transuranic waste destruction reduces from centuries (with FR) to decades

  13. Photolytic AND Catalytic Destruction of Organic Waste Water Pollutants

    Science.gov (United States)

    Torosyan, V. F.; Torosyan, E. S.; Kryuchkova, S. O.; Gromov, V. E.

    2017-01-01

    The system: water supply source - potable and industrial water - wastewater - sewage treatment - water supply source is necessary for water supply and efficient utilization of water resources. Up-to-date technologies of waste water biological treatment require for special microorganisms, which are technologically complex and expensive but unable to solve all the problems. Application of photolytic and catalytically-oxidizing destruction is quite promising. However, the most reagents are strong oxidizers in catalytic oxidation of organic substances and can initiate toxic substance generation. Methodic and scientific approaches to assess bread making industry influence on the environment have been developed in this paper in order to support forecasting and taking technological decisions concerning reduction of this influence. Destructive methods have been tested: ultra violet irradiation and catalytic oxidation for extraction of organic compounds from waste water by natural reagents.

  14. The non-destructive control, a major constituent of quality

    International Nuclear Information System (INIS)

    Anon.

    1998-01-01

    The number of continuous research and development works about non-destructive control in all sectors of activity is justified by the increasing need for high quality materials without anomalies. This paper gives a overview of the state of the art and of the recent trends in non-destructive testing researches in different sectors: aeronautics, nuclear industry, automotive industry. New studies and techniques are presented: ultrasonic testing of welds on large diameter pipes, automated applications of ultrasonic testing, ultrasound/computer-aided design coupling, pressure vessels inspection using acoustic emission testing (leaks detection, application to composite materials), numerical radiography (image visualisation and processing), magnetic testing (steel damage detection using Barkhausen noise testing), 'shearography' (detection of the loss of thickness in pipes due to corrosion), X-ray tomography (density measurement of sintered steels, fluid flow calculations in automobile parts). (J.S.)

  15. Non-destructive, high-content analysis of wheat grain traits using X-ray micro computed tomography

    Directory of Open Access Journals (Sweden)

    Nathan Hughes

    2017-11-01

    Full Text Available Abstract Background Wheat is one of the most widely grown crop in temperate climates for food and animal feed. In order to meet the demands of the predicted population increase in an ever-changing climate, wheat production needs to dramatically increase. Spike and grain traits are critical determinants of final yield and grain uniformity a commercially desired trait, but their analysis is laborious and often requires destructive harvest. One of the current challenges is to develop an accurate, non-destructive method for spike and grain trait analysis capable of handling large populations. Results In this study we describe the development of a robust method for the accurate extraction and measurement of spike and grain morphometric parameters from images acquired by X-ray micro-computed tomography (μCT. The image analysis pipeline developed automatically identifies plant material of interest in μCT images, performs image analysis, and extracts morphometric data. As a proof of principle, this integrated methodology was used to analyse the spikes from a population of wheat plants subjected to high temperatures under two different water regimes. Temperature has a negative effect on spike height and grain number with the middle of the spike being the most affected region. The data also confirmed that increased grain volume was correlated with the decrease in grain number under mild stress. Conclusions Being able to quickly measure plant phenotypes in a non-destructive manner is crucial to advance our understanding of gene function and the effects of the environment. We report on the development of an image analysis pipeline capable of accurately and reliably extracting spike and grain traits from crops without the loss of positional information. This methodology was applied to the analysis of wheat spikes can be readily applied to other economically important crop species.

  16. Complex Archaeological Prospection Using Combination of Non-destructive Techniques

    Science.gov (United States)

    Faltýnová, M.; Pavelka, K.; Nový, P.; Šedina, J.

    2015-08-01

    This article describes the use of a combination of non-destructive techniques for the complex documentation of a fabulous historical site called Devil's Furrow, an unusual linear formation lying in the landscape of central Bohemia. In spite of many efforts towards interpretation of the formation, its original form and purpose have not yet been explained in a satisfactory manner. The study focuses on the northern part of the furrow which appears to be a dissimilar element within the scope of the whole Devil's Furrow. This article presents detailed description of relics of the formation based on historical map searches and modern investigation methods including airborne laser scanning, aerial photogrammetry (based on airplane and RPAS) and ground-penetrating radar. Airborne laser scanning data and aerial orthoimages acquired by the Czech Office for Surveying, Mapping and Cadastre were used. Other measurements were conducted by our laboratory. Data acquired by various methods provide sufficient information to determine the probable original shape of the formation and proves explicitly the anthropological origin of the northern part of the formation (around village Lipany).

  17. Complex Archaeological Prospection Using Combination of Non-destructive Techniques

    Directory of Open Access Journals (Sweden)

    M. Faltýnová

    2015-08-01

    Full Text Available This article describes the use of a combination of non-destructive techniques for the complex documentation of a fabulous historical site called Devil’s Furrow, an unusual linear formation lying in the landscape of central Bohemia. In spite of many efforts towards interpretation of the formation, its original form and purpose have not yet been explained in a satisfactory manner. The study focuses on the northern part of the furrow which appears to be a dissimilar element within the scope of the whole Devil’s Furrow. This article presents detailed description of relics of the formation based on historical map searches and modern investigation methods including airborne laser scanning, aerial photogrammetry (based on airplane and RPAS and ground-penetrating radar. Airborne laser scanning data and aerial orthoimages acquired by the Czech Office for Surveying, Mapping and Cadastre were used. Other measurements were conducted by our laboratory. Data acquired by various methods provide sufficient information to determine the probable original shape of the formation and proves explicitly the anthropological origin of the northern part of the formation (around village Lipany.

  18. Host feeding in insect parasitoids: why destructively feed upon a host that excretes an alternative?

    NARCIS (Netherlands)

    Burger, J.S.M.; Reijnen, T.M.; Van Lenteren, J.C.; Vet, L.E.M.

    2004-01-01

    Host feeding is the consumption of host tissue by the adult female parasitoid. We studied the function of destructive host feeding and its advantage over non-destructive feeding on host-derived honeydew in the whitefly parasitoid Encarsia formosa Gahan (Hymenoptera: Aphelinidae). We allowed

  19. Psychological, interpersonal, and behavioral correlates of chronic self-destructiveness: an exploratory study.

    Science.gov (United States)

    Boudewyn, A C; Liem, J H

    1995-12-01

    In this study, we selected individuals high and low on a measure of chronic self-destructiveness--the tendency to perform behaviors that later reduce positive consequences and increase the probability of experiencing negative ones--and attempted to differentiate high and low scorers based on a set of hypothesized antecedent and concurrent psychological, interpersonal, and behavioral correlates. Men and women were equally represented in high- and low-scoring groups. High scorers reported experiencing more interpersonal exploitation, greater depression, lower self-esteem, more externalizing attitudes, and less control in relationships than low scorers. High-scoring individuals also engaged in more frequent acts of acute self-destructiveness, including attempted suicide. A significant age covariate effect emerged: high-scoring men and women were younger than low-scoring individuals. These findings underscore the importance of studying chronic self-destructiveness within a developmental framework and suggest that issues of safety and self-care may be particularly germane to educational and clinical interventions aimed at young adults.

  20. Constructive and Destructive Marital Conflict, Parenting, and Children's School and Social Adjustment.

    Science.gov (United States)

    McCoy, K P; George, M R W; Cummings, E M; Davies, P T

    2013-11-01

    This study addresses the links between destructive and constructive marital conflict and mothers' and fathers' parenting to understand associations with children's social and school adjustment. Multi-method, longitudinal assessments of 235 mothers, fathers, and children (129 girls) were collected across kindergarten, first, and second grades (ages 5-7 at Time 1; ages 7-9 at Time 3). Whereas constructive marital conflict was related to both mothers' and fathers' warm parenting, destructive marital conflict was only linked to fathers' use of inconsistent discipline. In turn, both mothers' and fathers' use of psychological control was related to children's school adjustment, and mothers' warmth was related to children's social adjustment. Reciprocal links between constructs were also explored, supporting associations between destructive marital conflict and mothers' and fathers' inconsistent discipline. The merit of examining marital conflict and parenting as multidimensional constructs is discussed in relation to understanding the processes and pathways within families that affect children's functioning.

  1. Acute thyrotoxicosis secondary to destructive thyroiditis associated with cardiac catheterization contrast dye.

    Science.gov (United States)

    Calvi, Laura; Daniels, Gilbert H

    2011-04-01

    Thyrotoxicosis caused by destructive thyroiditis is self-limited and results from the subacute release of preformed thyroid hormone. Common etiologies include painful subacute thyroiditis and silent (painless) subacute thyroiditis (including postpartum thyroiditis, amiodarone-associated destructive thyroiditis, and lithium-associated thyroiditis). Thyrotoxicosis commonly evolves slowly over a matter of weeks. We report a unique case of severe thyrotoxicosis caused by acute- onset painful destructive thyroiditis in a patient who received large amounts of nonionic contrast dye Hexabrix® for cardiac catheterization. The results of thyroid function and physical examination were normal before the catheterization. The acute onset of severe thyroid pain, rapid increase in serum Free Thyroxine Index, and thyroglobulin concentrations with a triiodothyronine to free thyroxine index ratio of thyroiditis, likely related to direct toxicity from the iodinated contrast material. In light of the large number of patients who receive these contrast agents during cardiac catheterization, clinicians should be advised of this potentially serious complication, particularly in the setting of unstable cardiac disease.

  2. Safeguards and Non-destructive Assay

    International Nuclear Information System (INIS)

    Carchon, R.; Bruggeman, M.

    2001-01-01

    SCK-CEN's programme on safeguards and non-destructive assay includes: (1) various activities to assure nuclear materials accountancy; (2) contributes to the implementation of Integrated Safeguards measures in Belgium and to assist the IAEA through the Belgian Support Programme; (3) renders services to internal and external customers in the field of safeguards; (4) improves passive neutron coincidence counting techniques for waste assay and safeguards verification measurements by R and D on correlation algorithms implemented via software or dedicated hardware; (5) improves gamma assay techniques for waste assay by implementing advanced scanning techniques and different correlation algorithms; and (6) develops numerical calibration techniques. Major achievements in these areas in 2000 are reported

  3. Evaluation of information-theoretic similarity measures for content-based retrieval and detection of masses in mammograms

    International Nuclear Information System (INIS)

    Tourassi, Georgia D.; Harrawood, Brian; Singh, Swatee; Lo, Joseph Y.; Floyd, Carey E.

    2007-01-01

    The purpose of this study was to evaluate image similarity measures employed in an information-theoretic computer-assisted detection (IT-CAD) scheme. The scheme was developed for content-based retrieval and detection of masses in screening mammograms. The study is aimed toward an interactive clinical paradigm where physicians query the proposed IT-CAD scheme on mammographic locations that are either visually suspicious or indicated as suspicious by other cuing CAD systems. The IT-CAD scheme provides an evidence-based, second opinion for query mammographic locations using a knowledge database of mass and normal cases. In this study, eight entropy-based similarity measures were compared with respect to retrieval precision and detection accuracy using a database of 1820 mammographic regions of interest. The IT-CAD scheme was then validated on a separate database for false positive reduction of progressively more challenging visual cues generated by an existing, in-house mass detection system. The study showed that the image similarity measures fall into one of two categories; one category is better suited to the retrieval of semantically similar cases while the second is more effective with knowledge-based decisions regarding the presence of a true mass in the query location. In addition, the IT-CAD scheme yielded a substantial reduction in false-positive detections while maintaining high detection rate for malignant masses

  4. Destruction of acenaphthene, fluorene, anthracene and pyrene by a dc gliding arc plasma reactor

    International Nuclear Information System (INIS)

    Yu Liang; Tu Xin; Li Xiaodong; Wang Yu; Chi Yong; Yan Jianhua

    2010-01-01

    In this study, four kinds of PAHs (polycyclic aromatic hydrocarbons) i.e. acenaphthene, fluorene, anthracene and pyrene are used as targets for investigation of PAHs treatment process assisted by dc gliding arc discharge. The effects of carrier gas and external resistance on the PAHs decomposition process are discussed. The results indicate that the destruction rate can be achieved to the highest with the carrier gas of oxygen and the external resistance of 50 kΩ independent of type of PAHs. Furthermore, experimental results suggest that destruction energy efficiency of gliding arc plasma would be improved by treating higher concentration pollutants. Based on the analysis of experimental results, possible destruction mechanisms in different gas discharge are discussed.

  5. The Destruction of Cultural Property in Timbuktu: Challenging the ICC War Crime Paradigm

    OpenAIRE

    Higgins, Noelle; Badar, Mohamed

    2017-01-01

    Cultural property has been destroyed, looted and trafficked throughout history, particularly during conflict situations. In many instances, the property that is destroyed belongs to, and / or represents, minority groups and its destruction impacts significantly on minority culture. ISIS, and related jihadist groups, have, in recent times, actively engaged in the deliberate destruction of cultural property in numerous States, including Iraq, Syria, and Mali. This has been described as ‘cultura...

  6. Assessment of relative POHC destruction at EPA's incineration research facility

    International Nuclear Information System (INIS)

    Carroll, G.J.; Lee, J.W.

    1992-01-01

    As part of their permitting process, hazardous waste incinerators must undergo demonstration tests, or trial burns, during which their ability to meet EPA performance standards is evaluated. Among the performance standards is a minimum destruction and removal efficiency (DRE) for principal organic hazardous constituents (POHCs) in the incinerator waste feed. In accordance with the regulations promulgated under the Resource Conservation and Recovery Act (RCRA), selection POHCs for incinerator trial burns is to be based on the degree of difficulty of incineration of the organic constituents in the waste and on their concentration or mass in the waste feed. In order to predict the relative difficulty of incineration specific compounds, several incinerability ranking approaches have been proposed, including a system based on POHC heats of combustion and a system based on thermal stability under pyrolytic condition. The latter ranking system was developed by the University of Dayton Research Institute (UDRI) under contract to the US EPA Risk Reduction Engineering Laboratory (RREL). The system is supported largely by non-flame, laboratory-scale data and is based on kinetic calculations indicating that contributor to emissions of undestroyed organic compounds. The subject tests were conducted to develop data on POHC behavior in a larger-scale, conventional incineration environment. 5 refs., 3 tabs

  7. Non-Destructive Evaluation Method Based On Dynamic Invariant Stress Resultants

    Directory of Open Access Journals (Sweden)

    Zhang Junchi

    2015-01-01

    Full Text Available Most of the vibration based damage detection methods are based on changes in frequencies, mode shapes, mode shape curvature, and flexibilities. These methods are limited and typically can only detect the presence and location of damage. Current methods seldom can identify the exact severity of damage to structures. This paper will present research in the development of a new non-destructive evaluation method to identify the existence, location, and severity of damage for structural systems. The method utilizes the concept of invariant stress resultants (ISR. The basic concept of ISR is that at any given cross section the resultant internal force distribution in a structural member is not affected by the inflicted damage. The method utilizes dynamic analysis of the structure to simulate direct measurements of acceleration, velocity and displacement simultaneously. The proposed dynamic ISR method is developed and utilized to detect the damage of corresponding changes in mass, damping and stiffness. The objectives of this research are to develop the basic theory of the dynamic ISR method, apply it to the specific types of structures, and verify the accuracy of the developed theory. Numerical results that demonstrate the application of the method will reflect the advanced sensitivity and accuracy in characterizing multiple damage locations.

  8. Online Preventative Non-Destructive Evaluation in Automated Fibre Placement

    NARCIS (Netherlands)

    Tonnaer, R.; Shroff, S.; Groves, R.M.

    2016-01-01

    The strict quality requirements for aerospace composite struc- tures give rise to costly quality control procedures. In automated bre placement (AFP) these procedures rely heavily on manual work and inspection. This research aims at performing preventative non-destructive evaluation of composite

  9. Assuring the reliability of structural components - experimental data and non-destructive examination requirements

    International Nuclear Information System (INIS)

    Lucia, A.C.

    1984-01-01

    The probability of failure of a structural component can be estimated by either statistical methods or a probabilistic structural reliability approach (where the failure is seen as a level crossing of a damage stochastic process which develops in space and in time). The probabilistic approach has the advantage that it makes available not only an absolute value of the failure probability but also a lot of additional information. The disadvantage of the probabilistic approach is its complexity. It is discussed for the following situations: reliability of a structural component, material properties, data for fatigue crack growth evaluation, a bench mark exercise on reactor pressure vessel failure probability computation, and non-destructive examination for assuring a given level of structural reliability. (U.K.)

  10. Destructive quantum interference in spin tunneling problems

    OpenAIRE

    von Delft, Jan; Henley, Christopher L.

    1992-01-01

    In some spin tunneling problems, there are several different but symmetry-related tunneling paths that connect the same initial and final configurations. The topological phase factors of the corresponding tunneling amplitudes can lead to destructive interference between the different paths, so that the total tunneling amplitude is zero. In the study of tunneling between different ground state configurations of the Kagom\\'{e}-lattice quantum Heisenberg antiferromagnet, this occurs when the spi...

  11. Visualization of Tooth for Non-Destructive Evaluation from CT Images

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Hui; Chae, Ok Sam [Kyung Hee University, Seoul (Korea, Republic of)

    2009-06-15

    This paper reports an effort to develop 3D tooth visualization system from CT sequence images as a part of the non-destructive evaluation suitable for the simulation of endodontics, orthodontics and other dental treatments. We focus on the segmentation and visualization for the individual tooth. In dental CT images teeth are touching the adjacent teeth or surrounded by the alveolar bones with similar intensity. We propose an improved level set method with shape prior to separate a tooth from other teeth as well as the alveolar bones. Reconstructed 3D model of individual tooth based on the segmentation results indicates that our technique is a very conducive tool for tooth visualization, evaluation and diagnosis. Some comparative visualization results validate the non-destructive function of our method.

  12. Post-Irradiation Non-Destructive Analyses of the AFIP-7 Experiment

    Science.gov (United States)

    Williams, W. J.; Robinson, A. B.; Rabin, B. H.

    2017-12-01

    This article reports the results and interpretation of post-irradiation non-destructive examinations performed on four curved full-size fuel plates that comprise the AFIP-7 experiment. These fuel plates, having a U-10 wt.%Mo monolithic design, were irradiated under moderate operating conditions in the Advanced Test Reactor to assess fuel performance for geometries that are prototypic of research reactor fuel assemblies. Non-destructive examinations include visual examination, neutron radiography, profilometry, and precision gamma scanning. This article evaluates the qualitative and quantitative data taken for each plate, compares corresponding data sets, and presents the results of swelling analyses. These characterization results demonstrate that the fuel meets established irradiation performance requirements for mechanical integrity, geometric stability, and stable and predictable behavior.

  13. Interfacing a gas proportional counter with a mass spectrometer: Simultaneous display of GC/MS and radiocarbon data

    International Nuclear Information System (INIS)

    Peterson, G.S.; Laemmerhirt, D.F.; Weaver, A.

    1985-01-01

    To facilitate the location of pesticides and monitor their metabolism in environmental and biological systems, carbon-14 labelling of the parent compound is used. Detection of the radiolabel is achieved using a gas proportional counter, while identification of the labelled components is most easily accomplished with mass spectrometry. However, when these two operations are performed separately, correlation of the information is awkward, at best. Since each is a destructive detector, simultaneous monitoring of the outposts requires an effluent splitter. The complete system consists of a variable splitter, which allows control of the ratio of the GC effluent to the two instruments, and signal processing circuitry for simultaneous recording and storage of radiocarbon and mass spectral data. Modifications to a Finnigan GC/MS and Gas Proportional Counter included a high temperature GC effluent splitter with glass-lined connecting tubing, and a data interface, including analog to digital and serial to parallel conversions with optical isolation between the gas proportional counter and the computer. The splitter restricted the flow to the mass spectrometer, preventing flow completely in the closed position. The split was adjusted to maximize flow to the mass spectrometer using the vacuum as a rough guide (1.0 x 10 -5 torr in EI, 7.5 x 10 -5 torr in CI). A heated transfer line between the transfer oven and gas proportional counter prevented condensation of eluting components prior to radiocarbon detection

  14. A Spatially Offset Raman Spectroscopy Method for Non-Destructive Detection of Gelatin-Encapsulated Powders

    Directory of Open Access Journals (Sweden)

    Kuanglin Chao

    2017-03-01

    Full Text Available Non-destructive subsurface detection of encapsulated, coated, or seal-packaged foods and pharmaceuticals can help prevent distribution and consumption of counterfeit or hazardous products. This study used a Spatially Offset Raman Spectroscopy (SORS method to detect and identify urea, ibuprofen, and acetaminophen powders contained within one or more (up to eight layers of gelatin capsules to demonstrate subsurface chemical detection and identification. A 785-nm point-scan Raman spectroscopy system was used to acquire spatially offset Raman spectra for an offset range of 0 to 10 mm from the surfaces of 24 encapsulated samples, using a step size of 0.1 mm to obtain 101 spectral measurements per sample. As the offset distance was increased, the spectral contribution from the subsurface powder gradually outweighed that of the surface capsule layers, allowing for detection of the encapsulated powders. Containing mixed contributions from the powder and capsule, the SORS spectra for each sample were resolved into pure component spectra using self-modeling mixture analysis (SMA and the corresponding components were identified using spectral information divergence values. As demonstrated here for detecting chemicals contained inside thick capsule layers, this SORS measurement technique coupled with SMA has the potential to be a reliable non-destructive method for subsurface inspection and authentication of foods, health supplements, and pharmaceutical products that are prepared or packaged with semi-transparent materials.

  15. Rapid and non-destructive discrimination of tea varieties by near ...

    African Journals Online (AJOL)

    Rapid and non-destructive discrimination of tea varieties by near infrared diffuse reflection spectroscopy coupled with classification and regression trees. SM Tan, RM Luo, YP Zhou, H Gong, Z Tan ...

  16. Non-destructive Faraday imaging of dynamically controlled ultracold atoms

    DEFF Research Database (Denmark)

    Gajdacz, Miroslav; Pedersen, Poul Lindholm; Mørch, Troels

    2013-01-01

    We describe an easily implementable method for non-destructive measurements of ultracold atomic clouds based on dark field imaging of spatially resolved Faraday rotation. The signal-to-noise ratio is analyzed theoretically and, in the absence of experimental imperfections, the sensitivity limit...

  17. Fatigue crack growth monitoring: fracture mechanics and non-destructive testing requirements

    International Nuclear Information System (INIS)

    Williams, S.; Mudge, P.J.

    1982-01-01

    If a fatigue crack is found in a component in service, two options exist if plant integrity is to be maintained: first, the plant can be removed from service and repairs effected or replacements fitted; second, the growth of the crack can be monitored non-destructively until it is either considered to be too large to tolerate, in which case it must be repaired, or until a convenient down time when repair can be effected. The second option has obvious benefits for plant operators, but in such a situation it is essential that errors of the non-destructive estimate of defect size, which will undoubtedly exist, and uncertainties in the fatigue crack growth laws in operation must both be allowed for if a safe extension of service life is to be obtained; i.e. without failure by leakage or fast fracture arising from the fatigue crack. This paper analyses the accuracy required of non-destructive crack measurement techniques to permit the safe monitoring of crack growth by periodic inspection. It then demonstrates that it is possible to achieve adequate crack monitoring using conventional ultrasonic techniques. (author)

  18. Primary Identification Methods and their Effectiveness in Mass Disaster Situations: A Literature Review

    Directory of Open Access Journals (Sweden)

    Naiara M. Gaglietti

    2017-06-01

    Full Text Available Mass disasters generally result in an elevated number of casualties that need identification. The primary identification methods listed by INTERPOL (DNA, fingerprint and forensic dentistry have a very important role in helping and speeding up the victim identification process. The present study sought to report mass destruction cases found in the literature published from 2005 to 2015 that have used the primary human identification methods. This study has been done as a literature review using the keywords: disasters, natural disasters, disaster victims, and human identification in a total of 16 selected papers and 13 listed disasters. It has been concluded that the primary identification methods are capable and efficient to perform a safe and satisfactory identification of mass disasters victims, used both separately or in combination.

  19. Destruction and Reallocation of Skills Following Large Company Exit

    DEFF Research Database (Denmark)

    Holm, Jacob Rubæk; Østergaard, Christian Richter; Olesen, Thomas Roslyng

    , skill destruction. This study is based on the closure of four shipyards in Denmark from 1987-2000. The analysis is based on detailed longitudinal micro data from a matched employer-employee dataset that allow us to follow the mobility of the laid-off employees in great detail. The analysis shows......What happens to redundant skills and workers when a large company closes down in a region? The knowledge embodied in firms is lost when firms exit. However, the skills, competences and knowledge embodied in the displaced employees are suddenly released and can become channels of knowledge transfer...... for other firms that hire them. This process can be very disruptive. For instance, when a large, old and well-renowned company closes down displacing thousands of workers over a short period of time, then it may be a shock to the regional economy and lead to unemployment and skill destruction. The question...

  20. Non-destructive Faraday imaging of dynamically controlled ultracold atoms

    Science.gov (United States)

    Gajdacz, Miroslav; Pedersen, Poul; Mørch, Troels; Hilliard, Andrew; Arlt, Jan; Sherson, Jacob

    2013-05-01

    We investigate non-destructive measurements of ultra-cold atomic clouds based on dark field imaging of spatially resolved Faraday rotation. In particular, we pursue applications to dynamically controlled ultracold atoms. The dependence of the Faraday signal on laser detuning, atomic density and temperature is characterized in a detailed comparison with theory. In particular the destructivity per measurement is extremely low and we illustrate this by imaging the same cloud up to 2000 times. The technique is applied to avoid the effect of shot-to-shot fluctuations in atom number calibration. Adding dynamic changes to system parameters, we demonstrate single-run vector magnetic field imaging and single-run spatial imaging of the system's dynamic behavior. The method can be implemented particularly easily in standard imaging systems by the insertion of an extra polarizing beam splitter. These results are steps towards quantum state engineering using feedback control of ultracold atoms.