WorldWideScience

Sample records for mass classification system

  1. Rock mass classification system : transition from RMR to GSI.

    2013-11-01

    The AASHTO LRFD Bridge Design Specifications is expected to replace the rock mass rating : (RMR) system with the Geological Strength Index (GSI) system for classifying and estimating : engineering properties of rock masses. This transition is motivat...

  2. Correlation of the Rock Mass Rating (RMR) System with the Unified Soil Classification System (USCS): Introduction of the Weak Rock Mass Rating System (W-RMR)

    Warren, Sean N.; Kallu, Raj R.; Barnard, Chase K.

    2016-11-01

    Underground gold mines in Nevada are exploiting increasingly deeper ore bodies comprised of weak to very weak rock masses. The Rock Mass Rating (RMR) classification system is widely used at underground gold mines in Nevada and is applicable in fair to good-quality rock masses, but is difficult to apply and loses reliability in very weak rock mass to soil-like material. Because very weak rock masses are transition materials that border engineering rock mass and soil classification systems, soil classification may sometimes be easier and more appropriate to provide insight into material behavior and properties. The Unified Soil Classification System (USCS) is the most likely choice for the classification of very weak rock mass to soil-like material because of its accepted use in tunnel engineering projects and its ability to predict soil-like material behavior underground. A correlation between the RMR and USCS systems was developed by comparing underground geotechnical RMR mapping to laboratory testing of bulk samples from the same locations, thereby assigning a numeric RMR value to the USCS classification that can be used in spreadsheet calculations and geostatistical analyses. The geotechnical classification system presented in this paper including a USCS-RMR correlation, RMR rating equations, and the Geo-Pick Strike Index is collectively introduced as the Weak Rock Mass Rating System (W-RMR). It is the authors' hope that this system will aid in the classification of weak rock masses and more usable design tools based on the RMR system. More broadly, the RMR-USCS correlation and the W-RMR system help define the transition between engineering soil and rock mass classification systems and may provide insight for geotechnical design in very weak rock masses.

  3. Can a Modified Bosniak Classification System Risk Stratify Pediatric Cystic Renal Masses?

    Saltzman, Amanda F; Carrasco, Alonso; Colvin, Alexandra N; Meyers, Mariana L; Cost, Nicholas G

    2018-03-20

    We characterize and apply the modified Bosniak classification system to a cohort of children with cystic renal lesions and known surgical pathology. We identified all patients at our institution with cystic renal masses who also underwent surgery for these lesions. Patients without available preoperative imaging or pathology were excluded. All radiological imaging was independently reviewed by a pediatric radiologist blinded to pathological findings. Imaging characteristics (size, border, septations, calcifications, solid components, vascularity) were recorded from the most recent preoperative ultrasounds and computerized tomograms. The modified Bosniak classification system was applied to these scans and then correlated with final pathology. A total of 22 patients met study criteria. Median age at surgery was 6.1 years (range 11 months to 16.8 years). Of the patients 12 (54.5%) underwent open nephrectomy, 6 (27.3%) open partial nephrectomy, 2 (9.1%) laparoscopic cyst decortication, 1 (4.5%) open renal biopsy and 1 (4.5%) laparoscopic partial nephrectomy. Final pathology was benign in 9 cases (41%), intermediate in 6 (27%) and malignant in 7 (32%). All malignant lesions were modified Bosniak class 4, all intermediate lesions were modified class 3 or 4 and 8 of 9 benign lesions (89%) were modified class 1 or 2. Cystic renal lesions in children with a modified Bosniak class of 1 or 2 were most often benign, while class 3 or 4 lesions warranted surgical excision since more than 90% of masses harbored intermediate or malignant pathology. The modified Bosniak classification system appears to allow for a reasonable clinical risk stratification of pediatric cystic renal masses. Copyright © 2018 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

  4. Simultaneous detection and classification of breast masses in digital mammograms via a deep learning YOLO-based CAD system.

    Al-Masni, Mohammed A; Al-Antari, Mugahed A; Park, Jeong-Min; Gi, Geon; Kim, Tae-Yeon; Rivera, Patricio; Valarezo, Edwin; Choi, Mun-Taek; Han, Seung-Moo; Kim, Tae-Seong

    2018-04-01

    Automatic detection and classification of the masses in mammograms are still a big challenge and play a crucial role to assist radiologists for accurate diagnosis. In this paper, we propose a novel Computer-Aided Diagnosis (CAD) system based on one of the regional deep learning techniques, a ROI-based Convolutional Neural Network (CNN) which is called You Only Look Once (YOLO). Although most previous studies only deal with classification of masses, our proposed YOLO-based CAD system can handle detection and classification simultaneously in one framework. The proposed CAD system contains four main stages: preprocessing of mammograms, feature extraction utilizing deep convolutional networks, mass detection with confidence, and finally mass classification using Fully Connected Neural Networks (FC-NNs). In this study, we utilized original 600 mammograms from Digital Database for Screening Mammography (DDSM) and their augmented mammograms of 2,400 with the information of the masses and their types in training and testing our CAD. The trained YOLO-based CAD system detects the masses and then classifies their types into benign or malignant. Our results with five-fold cross validation tests show that the proposed CAD system detects the mass location with an overall accuracy of 99.7%. The system also distinguishes between benign and malignant lesions with an overall accuracy of 97%. Our proposed system even works on some challenging breast cancer cases where the masses exist over the pectoral muscles or dense regions. Copyright © 2018 Elsevier B.V. All rights reserved.

  5. Overweight and obesity prevalence among Cree youth of Eeyou Istchee according to three body mass index classification systems

    St-Jean, Audray; Meziou, Salma; Ayotte, Pierre; Lucas, Michel

    2017-01-01

    Background Little is known about the suitability of three commonly used body mass index (BMI) classification systems for Indigenous youth. We estimated overweight and obesity prevalence among Cree youth of Eeyou Istchee according to three BMI classification systems, assessed the level of agreement between them, and evaluated their accuracy through body fat and cardiometabolic risk factors. Methods Data on 288 youth (aged 8–17 years) were collected. Overweight and obesity prevalence were estim...

  6. Overweight and obesity prevalence among Cree youth of Eeyou Istchee according to three body mass index classification systems.

    St-Jean, Audray; Meziou, Salma; Ayotte, Pierre; Lucas, Michel

    2017-11-22

    Little is known about the suitability of three commonly used body mass index (BMI) classification systems for Indigenous youth. We estimated overweight and obesity prevalence among Cree youth of Eeyou Istchee according to three BMI classification systems, assessed the level of agreement between them, and evaluated their accuracy through body fat and cardiometabolic risk factors. Data on 288 youth (aged 8-17 years) were collected. Overweight and obesity prevalence were estimated with Centers for Disease Control and Prevention (CDC), International Obesity Task Force (IOTF) and World Health Organization (WHO) criteria. Agreement was measured with weighted kappa (κw). Associations with body fat and cardiometabolic risk factors were evaluated by analysis of variance. Obesity prevalence was 42.7% with IOTF, 47.2% with CDC, and 49.3% with WHO criteria. Agreement was almost perfect between IOTF and CDC (κw = 0.93), IOTF and WHO (κw = 0.91), and WHO and CDC (κw = 0.94). Means of body fat and cardiometabolic risk factors were significantly higher (P trend  obesity, regardless of the system used. Youth considered overweight by IOTF but obese by CDC or WHO exhibited less severe clinical obesity. IOTF seems to be more accurate in identifying obesity in Cree youth.

  7. Ontologies vs. Classification Systems

    Madsen, Bodil Nistrup; Erdman Thomsen, Hanne

    2009-01-01

    What is an ontology compared to a classification system? Is a taxonomy a kind of classification system or a kind of ontology? These are questions that we meet when working with people from industry and public authorities, who need methods and tools for concept clarification, for developing meta...... data sets or for obtaining advanced search facilities. In this paper we will present an attempt at answering these questions. We will give a presentation of various types of ontologies and briefly introduce terminological ontologies. Furthermore we will argue that classification systems, e.g. product...... classification systems and meta data taxonomies, should be based on ontologies....

  8. Overweight and Obesity Prevalence Among School-Aged Nunavik Inuit Children According to Three Body Mass Index Classification Systems.

    Medehouenou, Thierry Comlan Marc; Ayotte, Pierre; St-Jean, Audray; Meziou, Salma; Roy, Cynthia; Muckle, Gina; Lucas, Michel

    2015-07-01

    Little is known about the suitability of three commonly used body mass index (BMI) classification system for Indigenous children. This study aims to estimate overweight and obesity prevalence among school-aged Nunavik Inuit children according to International Obesity Task Force (IOTF), Centers for Disease Control and Prevention (CDC), and World Health Organization (WHO) BMI classification systems, to measure agreement between those classification systems, and to investigate whether BMI status as defined by these classification systems is associated with levels of metabolic and inflammatory biomarkers. Data were collected on 290 school-aged children (aged 8-14 years; 50.7% girls) from the Nunavik Child Development Study with data collected in 2005-2010. Anthropometric parameters were measured and blood sampled. Participants were classified as normal weight, overweight, and obese according to BMI classification systems. Weighted kappa (κw) statistics assessed agreement between different BMI classification systems, and multivariate analysis of variance ascertained their relationship with metabolic and inflammatory biomarkers. The combined prevalence rate of overweight/obesity was 26.9% (with 6.6% obesity) with IOTF, 24.1% (11.0%) with CDC, and 40.4% (12.8%) with WHO classification systems. Agreement was the highest between IOTF and CDC (κw = .87) classifications, and substantial for IOTF and WHO (κw = .69) and for CDC and WHO (κw = .73). Insulin and high-sensitivity C-reactive protein plasma levels were significantly higher from normal weight to obesity, regardless of classification system. Among obese subjects, higher insulin level was observed with IOTF. Compared with other systems, IOTF classification appears to be more specific to identify overweight and obesity in Inuit children. Copyright © 2015 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

  9. Orbit classification in an equal-mass non-spinning binary black hole pseudo-Newtonian system

    Zotos, Euaggelos E.; Dubeibe, F. L.; González, Guillermo A.

    2018-04-01

    The dynamics of a test particle in a non-spinning binary black hole system of equal masses is numerically investigated. The binary system is modeled in the context of the pseudo-Newtonian circular restricted three-body problem, such that the primaries are separated by a fixed distance and move in a circular orbit around each other. In particular, the Paczyński-Wiita potential is used for describing the gravitational field of the two non-Newtonian primaries. The orbital properties of the test particle are determined through the classification of the initial conditions of the orbits, using several values of the Jacobi constant, in the Hill's regions of possible motion. The initial conditions are classified into three main categories: (i) bounded, (ii) escaping and (iii) displaying close encounters. Using the smaller alignment index (SALI) chaos indicator, we further classify bounded orbits into regular, sticky or chaotic. To gain a complete view of the dynamics of the system, we define grids of initial conditions on different types of two-dimensional planes. The orbital structure of the configuration plane, along with the corresponding distributions of the escape and collision/close encounter times, allow us to observe the transition from the classical Newtonian to the pseudo-Newtonian regime. Our numerical results reveal a strong dependence of the properties of the considered basins with the Jacobi constant as well as with the Schwarzschild radius of the black holes.

  10. Bosniak classification system: a prospective comparison of CT, contrast-enhanced US, and MR for categorizing complex renal cystic masses.

    Graumann, Ole; Osther, Susanne Sloth; Karstoft, Jens; Hørlyck, Arne; Osther, Palle Jörn Sloth

    2016-11-01

    Background The Bosniak classification was originally based on computed tomographic (CT) findings. Magnetic resonance (MR) and contrast-enhanced ultrasonography (CEUS) imaging may demonstrate findings that are not depicted at CT, and there may not always be a clear correlation between the findings at MR and CEUS imaging and those at CT. Purpose To compare diagnostic accuracy of MR, CEUS, and CT when categorizing complex renal cystic masses according to the Bosniak classification. Material and Methods From February 2011 to June 2012, 46 complex renal cysts were prospectively evaluated by three readers. Each mass was categorized according to the Bosniak classification and CT was chosen as gold standard. Kappa was calculated for diagnostic accuracy and data was compared with pathological results. Results CT images found 27 BII, six BIIF, seven BIII, and six BIV. Forty-three cysts could be characterized by CEUS, 79% were in agreement with CT (κ = 0.86). Five BII lesions were upgraded to BIIF and four lesions were categorized lower with CEUS. Forty-one lesions were examined with MR; 78% were in agreement with CT (κ = 0.91). Three BII lesions were upgraded to BIIF and six lesions were categorized one category lower. Pathologic correlation in six lesions revealed four malignant and two benign lesions. Conclusion CEUS and MR both up- and downgraded renal cysts compared to CT, and until these non-radiation modalities have been refined and adjusted, CT should remain the gold standard of the Bosniak classification.

  11. Bosniak classification system

    Graumann, Ole; Osther, Susanne Sloth; Karstoft, Jens

    2016-01-01

    BACKGROUND: The Bosniak classification was originally based on computed tomographic (CT) findings. Magnetic resonance (MR) and contrast-enhanced ultrasonography (CEUS) imaging may demonstrate findings that are not depicted at CT, and there may not always be a clear correlation between the findings...... at MR and CEUS imaging and those at CT. PURPOSE: To compare diagnostic accuracy of MR, CEUS, and CT when categorizing complex renal cystic masses according to the Bosniak classification. MATERIAL AND METHODS: From February 2011 to June 2012, 46 complex renal cysts were prospectively evaluated by three...... readers. Each mass was categorized according to the Bosniak classification and CT was chosen as gold standard. Kappa was calculated for diagnostic accuracy and data was compared with pathological results. RESULTS: CT images found 27 BII, six BIIF, seven BIII, and six BIV. Forty-three cysts could...

  12. Bosniak Classification system

    Graumann, Ole; Osther, Susanne Sloth; Karstoft, Jens

    2014-01-01

    Background: The Bosniak classification is a diagnostic tool for the differentiation of cystic changes in the kidney. The process of categorizing renal cysts may be challenging, involving a series of decisions that may affect the final diagnosis and clinical outcome such as surgical management....... Purpose: To investigate the inter- and intra-observer agreement among experienced uroradiologists when categorizing complex renal cysts according to the Bosniak classification. Material and Methods: The original categories of 100 cystic renal masses were chosen as “Gold Standard” (GS), established...... to the calculated weighted κ all readers performed “very good” for both inter-observer and intra-observer variation. Most variation was seen in cysts catagorized as Bosniak II, IIF, and III. These results show that radiologists who evaluate complex renal cysts routinely may apply the Bosniak classification...

  13. Casemix classification systems.

    Fetter, R B

    1999-01-01

    The idea of using casemix classification to manage hospital services is not new, but has been limited by available technology. It was not until after the introduction of Medicare in the United States in 1965 that serious attempts were made to measure hospital production in order to contain spiralling costs. This resulted in a system of casemix classification known as diagnosis related groups (DRGs). This paper traces the development of DRGs and their evolution from the initial version to the All Patient Refined DRGs developed in 1991.

  14. Neuromuscular disease classification system

    Sáez, Aurora; Acha, Begoña; Montero-Sánchez, Adoración; Rivas, Eloy; Escudero, Luis M.; Serrano, Carmen

    2013-06-01

    Diagnosis of neuromuscular diseases is based on subjective visual assessment of biopsies from patients by the pathologist specialist. A system for objective analysis and classification of muscular dystrophies and neurogenic atrophies through muscle biopsy images of fluorescence microscopy is presented. The procedure starts with an accurate segmentation of the muscle fibers using mathematical morphology and a watershed transform. A feature extraction step is carried out in two parts: 24 features that pathologists take into account to diagnose the diseases and 58 structural features that the human eye cannot see, based on the assumption that the biopsy is considered as a graph, where the nodes are represented by each fiber, and two nodes are connected if two fibers are adjacent. A feature selection using sequential forward selection and sequential backward selection methods, a classification using a Fuzzy ARTMAP neural network, and a study of grading the severity are performed on these two sets of features. A database consisting of 91 images was used: 71 images for the training step and 20 as the test. A classification error of 0% was obtained. It is concluded that the addition of features undetectable by the human visual inspection improves the categorization of atrophic patterns.

  15. Improved RMR Rock Mass Classification Using Artificial Intelligence Algorithms

    Gholami, Raoof; Rasouli, Vamegh; Alimoradi, Andisheh

    2013-09-01

    Rock mass classification systems such as rock mass rating (RMR) are very reliable means to provide information about the quality of rocks surrounding a structure as well as to propose suitable support systems for unstable regions. Many correlations have been proposed to relate measured quantities such as wave velocity to rock mass classification systems to limit the associated time and cost of conducting the sampling and mechanical tests conventionally used to calculate RMR values. However, these empirical correlations have been found to be unreliable, as they usually overestimate or underestimate the RMR value. The aim of this paper is to compare the results of RMR classification obtained from the use of empirical correlations versus machine-learning methodologies based on artificial intelligence algorithms. The proposed methods were verified based on two case studies located in northern Iran. Relevance vector regression (RVR) and support vector regression (SVR), as two robust machine-learning methodologies, were used to predict the RMR for tunnel host rocks. RMR values already obtained by sampling and site investigation at one tunnel were taken into account as the output of the artificial networks during training and testing phases. The results reveal that use of empirical correlations overestimates the predicted RMR values. RVR and SVR, however, showed more reliable results, and are therefore suggested for use in RMR classification for design purposes of rock structures.

  16. CLASSIFICATION OF LEARNING MANAGEMENT SYSTEMS

    Yu. B. Popova

    2016-01-01

    Full Text Available Using of information technologies and, in particular, learning management systems, increases opportunities of teachers and students in reaching their goals in education. Such systems provide learning content, help organize and monitor training, collect progress statistics and take into account the individual characteristics of each user. Currently, there is a huge inventory of both paid and free systems are physically located both on college servers and in the cloud, offering different features sets of different licensing scheme and the cost. This creates the problem of choosing the best system. This problem is partly due to the lack of comprehensive classification of such systems. Analysis of more than 30 of the most common now automated learning management systems has shown that a classification of such systems should be carried out according to certain criteria, under which the same type of system can be considered. As classification features offered by the author are: cost, functionality, modularity, keeping the customer’s requirements, the integration of content, the physical location of a system, adaptability training. Considering the learning management system within these classifications and taking into account the current trends of their development, it is possible to identify the main requirements to them: functionality, reliability, ease of use, low cost, support for SCORM standard or Tin Can API, modularity and adaptability. According to the requirements at the Software Department of FITR BNTU under the guidance of the author since 2009 take place the development, the use and continuous improvement of their own learning management system.

  17. Oral epithelial dysplasia classification systems

    Warnakulasuriya, S; Reibel, J; Bouquot, J

    2008-01-01

    At a workshop coordinated by the WHO Collaborating Centre for Oral Cancer and Precancer in the United Kingdom issues related to potentially malignant disorders of the oral cavity were discussed by an expert group. The consensus views of the Working Group are presented in a series of papers....... In this report, we review the oral epithelial dysplasia classification systems. The three classification schemes [oral epithelial dysplasia scoring system, squamous intraepithelial neoplasia and Ljubljana classification] were presented and the Working Group recommended epithelial dysplasia grading for routine...... use. Although most oral pathologists possibly recognize and accept the criteria for grading epithelial dysplasia, firstly based on architectural features and then of cytology, there is great variability in their interpretation of the presence, degree and significance of the individual criteria...

  18. Classification of mammographic masses using geometric symmetry and fractal analysis

    Guo Qi; Ruiz, V.F. [Cybernetics, School of Systems Engineering, Univ. of Reading (United Kingdom); Shao Jiaqing [Dept. of Electronics, Univ. of Kent (United Kingdom); Guo Falei [WanDe Industrial Engineering Co. (China)

    2007-06-15

    In this paper, we propose a fuzzy symmetry measure based on geometrical operations to characterise shape irregularity of mammographic mass lesion. Group theory, a powerful tool in the investigation of geometric transformation, is employed in our work to define and describe the underlying mathematical relations. We investigate the usefulness of fuzzy symmetry measure in combination with fractal analysis for classification of masses. Comparative studies show that fuzzy symmetry measure is useful for shape characterisation of mass lesions and is a good complementary feature for benign-versus-malignant classification of masses. (orig.)

  19. Applicability of geomechanical classifications for estimation of strength properties in Brazilian rock masses.

    Santos, Tatiana B; Lana, Milene S; Santos, Allan E M; Silveira, Larissa R C

    2017-01-01

    Many authors have been proposed several correlation equations between geomechanical classifications and strength parameters. However, these correlation equations have been based in rock masses with different characteristics when compared to Brazilian rock masses. This paper aims to study the applicability of the geomechanical classifications to obtain strength parameters of three Brazilian rock masses. Four classification systems have been used; the Rock Mass Rating (RMR), the Rock Mass Quality (Q), the Geological Strength Index (GSI) and the Rock Mass Index (RMi). A strong rock mass and two soft rock masses with different degrees of weathering located in the cities of Ouro Preto and Mariana, Brazil; were selected for the study. Correlation equations were used to estimate the strength properties of these rock masses. However, such correlations do not always provide compatible results with the rock mass behavior. For the calibration of the strength values obtained through the use of classification systems, ​​stability analyses of failures in these rock masses have been done. After calibration of these parameters, the applicability of the various correlation equations found in the literature have been discussed. According to the results presented in this paper, some of these equations are not suitable for the studied rock masses.

  20. Deep learning for tumor classification in imaging mass spectrometry.

    Behrmann, Jens; Etmann, Christian; Boskamp, Tobias; Casadonte, Rita; Kriegsmann, Jörg; Maaß, Peter

    2018-04-01

    Tumor classification using imaging mass spectrometry (IMS) data has a high potential for future applications in pathology. Due to the complexity and size of the data, automated feature extraction and classification steps are required to fully process the data. Since mass spectra exhibit certain structural similarities to image data, deep learning may offer a promising strategy for classification of IMS data as it has been successfully applied to image classification. Methodologically, we propose an adapted architecture based on deep convolutional networks to handle the characteristics of mass spectrometry data, as well as a strategy to interpret the learned model in the spectral domain based on a sensitivity analysis. The proposed methods are evaluated on two algorithmically challenging tumor classification tasks and compared to a baseline approach. Competitiveness of the proposed methods is shown on both tasks by studying the performance via cross-validation. Moreover, the learned models are analyzed by the proposed sensitivity analysis revealing biologically plausible effects as well as confounding factors of the considered tasks. Thus, this study may serve as a starting point for further development of deep learning approaches in IMS classification tasks. https://gitlab.informatik.uni-bremen.de/digipath/Deep_Learning_for_Tumor_Classification_in_IMS. jbehrmann@uni-bremen.de or christianetmann@uni-bremen.de. Supplementary data are available at Bioinformatics online.

  1. Engineering rock mass classification of the Olkiluoto investigation site

    Aeikaes, K. [ed.; Hagros, A.; Johansson, E. [Saanio and Riekkola Consulting Engineers, Helsinki (Finland)] [and others

    2000-06-01

    Olkiluoto in Eurajoki is being investigated as a possible site for the final disposal of spent nuclear fuel from the Finnish nuclear power plants. The selection of the depth, placement and layout of the repository is affected by the constructability of the bedrock. The constructability, in turn, is influenced by several properties of the host rock, such as its Ethology, the extent of fracturing, its hydrogeological properties and rock engineering characteristics and also by the magnitude and orientation of the in situ stresses and the chemistry of the groundwater. The constructability can be evaluated by the application of a rock classification system in which the properties of the host rock are assessed against common rock engineering judgements associated with underground construction. These judgements are based partly on measurements of in situ stresses and the properties of the bedrock determined from rock samples, but an important aspect is also the practical experience which has been gained during underground excavation in similar conditions and rock types. The aim of the engineering rock mass classification was to determine suitable bedrock volumes for the construction of the repository and has used data from the site characterisation programme carried out at Olkiluoto, which consisted of both surface studies and borehole investigations. The classification specifies three categories of constructability - normal, demanding and very demanding. In addition, rock mass quality has also been classified according to the empirical Q-system to enable a comparison to be made. The rock mass parameters that determine the constructability of the bedrock at Olkiluoto depend primarily on the depth and the Ethology, as well as on whether construction takes place in intact or in fractured rock. The differences in the characteristics of intact rock within a single rock type have been shown to be small. The major lithological unit at Olkiluoto, the mica gneiss, lies in the

  2. Use of border information in the classification of mammographic masses

    Varela, C; Timp, S; Karssemeijer, N

    2006-01-01

    We are developing a new method to characterize the margin of a mammographic mass lesion to improve the classification of benign and malignant masses. Towards this goal, we designed features that measure the degree of sharpness and microlobulation of mass margins. We calculated these features in a border region of the mass defined as a thin band along the mass contour. The importance of these features in the classification of benign and malignant masses was studied in relation to existing features used for mammographic mass detection. Features were divided into three groups, each representing a different mass segment: the interior region of a mass, the border and the outer area. The interior and the outer area of a mass were characterized using contrast and spiculation measures. Classification was done in two steps. First, features representing each of the three mass segments were merged into a neural network classifier resulting in a single regional classification score for each segment. Secondly, a classifier combined the three single scores into a final output to discriminate between benign and malignant lesions. We compared the classification performance of each regional classifier and the combined classifier on a data set of 1076 biopsy proved masses (590 malignant and 486 benign) from 481 women included in the Digital Database for Screening Mammography. Receiver operating characteristic (ROC) analysis was used to evaluate the accuracy of the classifiers. The area under the ROC curve (A z ) was 0.69 for the interior mass segment, 0.76 for the border segment and 0.75 for the outer mass segment. The performance of the combined classifier was 0.81 for image-based and 0.83 for case-based evaluation. These results show that the combination of information from different mass segments is an effective approach for computer-aided characterization of mammographic masses. An advantage of this approach is that it allows the assessment of the contribution of regions rather

  3. Classification of Magnetic Nanoparticle Systems

    Bogren, Sara; Fornara, Andrea; Ludwig, Frank

    2015-01-01

    and the size parameters are determined from electron microscopy and dynamic light scattering. Using these methods, we also show that the nanocrystal size and particle morphology determines the dynamic magnetic properties for both single- and multi-core particles. The presented results are obtained from...... the four year EU NMP FP7 project, NanoMag, which is focused on standardization of analysis methods for magnetic nanoparticles.......This study presents classification of different magnetic single- and multi-core particle systems using their measured dynamic magnetic properties together with their nanocrystal and particle sizes. The dynamic magnetic properties are measured with AC (dynamical) susceptometry and magnetorelaxometry...

  4. Computerized classification of mass lesions in digital mammograms

    Giger, M.L.; Doi, K.; Yin, F.F.; Schmidt, R.A.; Vyborny, C.J.

    1989-01-01

    Subjective classification of masses on mammograms is a difficult task. On average, about 25% of masses referred for surgical biopsy are actually malignant. The authors are developing, as an aid to radiologists, a computerized scheme for the classification of lesions in mammograms to reduce the false-negative and false-positive diagnoses of malignancies. The classification scheme involves the extraction of border information from the mammographic lesion in order to quantify the degree of spiculation, which is related to the possibility of malignancy. Clinical film mammograms are digitized with an optical drum scanner (0.1-mm pixel size) for analysis on a Micro VAX 3500 computer. Border information (fluctuations) is obtained from the difference between the lesion border and its smoothed border. Using the rms variation of the frequency content of these fluctuations, approximately 85% of the cancerous lesions were correctly classified as malignant, while 15% of benign lesions were misclassified, in a preliminary study

  5. Classification of huminite-ICCP System 1994

    Sykorova, I. [Institute of Rock Structure and Mechanics, Academy of Science of the Czech Republic, V Holesovicka 41, 182 09 Prague 8 (Czech Republic); Pickel, W. [Coal and Organic Petrology Services Pty Ltd, 23/80 Box Road, Taren Point, NSW 2229 (Australia); Christanis, K. [Department of Geology, University of Patras, 26500 Rio-Patras (Greece); Wolf, M. [Mergelskull 29, 47802 Krefeld (Germany); Taylor, G.H. [15 Hawkesbury Cres, Farrer Act 2607 (Australia); Flores, D. [Departamento de Geologia, Faculdade de Ciencias do Porto, Praca de Gomes Teixeira, 4099-002 Porto (Portugal)

    2005-04-12

    In the new classification (ICCP System 1994), the maceral group huminite has been revised from the previous classification (ICCP, 1971. Int. Handbook Coal Petr., suppl. to 2nd ed.) to accommodate the nomenclature to changes in the other maceral groups, especially the changes in the vitrinite classification (ICCP, 1998. The new vitrinite classification (ICCP System 1994). Fuel 77, 349-358.). The vitrinite and huminite systems have been correlated so that down to the level of sub-maceral groups, the two systems can be used in parallel. At the level of macerals and for finer classifications, the analyst now has, according to the nature of the coal and the purpose of the analysis, a choice of using either of the two classification systems for huminite and vitrinite. This is in accordance with the new ISO Coal Classification that covers low rank coals as well and allows for the simultaneous use of the huminite and vitrinite nomenclature for low rank coals.

  6. Classification of masses on mammograms using support vector machine

    Chu, Yong; Li, Lihua; Goldgof, Dmitry B.; Qui, Yan; Clark, Robert A.

    2003-05-01

    Mammography is the most effective method for early detection of breast cancer. However, the positive predictive value for classification of malignant and benign lesion from mammographic images is not very high. Clinical studies have shown that most biopsies for cancer are very low, between 15% and 30%. It is important to increase the diagnostic accuracy by improving the positive predictive value to reduce the number of unnecessary biopsies. In this paper, a new classification method was proposed to distinguish malignant from benign masses in mammography by Support Vector Machine (SVM) method. Thirteen features were selected based on receiver operating characteristic (ROC) analysis of classification using individual feature. These features include four shape features, two gradient features and seven Laws features. With these features, SVM was used to classify the masses into two categories, benign and malignant, in which a Gaussian kernel and sequential minimal optimization learning technique are performed. The data set used in this study consists of 193 cases, in which there are 96 benign cases and 97 malignant cases. The leave-one-out evaluation of SVM classifier was taken. The results show that the positive predict value of the presented method is 81.6% with the sensitivity of 83.7% and the false-positive rate of 30.2%. It demonstrated that the SVM-based classifier is effective in mass classification.

  7. A new qualitative pattern classification of shear wave elastograghy for solid breast mass evaluation.

    Cong, Rui; Li, Jing; Guo, Song

    2017-02-01

    To examine the efficacy of qualitative shear wave elastography (SWE) in the classification and evaluation of solid breast masses, and to compare this method with conventional ultrasonograghy (US), quantitative SWE parameters and qualitative SWE classification proposed before. From April 2015 to March 2016, 314 consecutive females with 325 breast masses who decided to undergo core needle biopsy and/or surgical biopsy were enrolled. Conventional US and SWE were previously performed in all enrolled subjects. Each mass was classified by two different qualitative classifications. One was established in our study, herein named the Qual1. Qual1 could classify the SWE images into five color patterns by the visual evaluations: Color pattern 1 (homogeneous pattern); Color pattern 2 (comparative homogeneous pattern); Color pattern 3 (irregularly heterogeneous pattern); Color pattern 4 (intralesional echo pattern); and Color pattern 5 (the stiff rim sign pattern). The second qualitative classification was named Qual2 here, and included a four-color overlay pattern classification (Tozaki and Fukuma, Acta Radiologica, 2011). The Breast Imaging Reporting and Data System (BI-RADS) assessment and quantitative SWE parameters were recorded. Diagnostic performances of conventional US, SWE parameters, and combinations of US and SWE parameters were compared. With pathological results as the gold standard, of the 325 examined breast masses, 139 (42.77%) samples were malignant and 186 (57.23%) were benign. The Qual1 showed a higher Az value than the Qual2 and quantitative SWE parameters (all Pbreast mass diagnoses. Copyright © 2016. Published by Elsevier B.V.

  8. AOSpine subaxial cervical spine injury classification system

    Vaccaro, Alexander R.; Koerner, John D.; Radcliff, Kris E.; Oner, F. Cumhur; Reinhold, Maximilian; Schnake, Klaus J.; Kandziora, Frank; Fehlings, Michael G.; Dvorak, Marcel F.; Aarabi, Bizhan; Rajasekaran, Shanmuganathan; Schroeder, Gregory D.; Kepler, Christopher K.; Vialle, Luiz R.

    2016-01-01

    Purpose: This project describes a morphology-based subaxial cervical spine traumatic injury classification system. Using the same approach as the thoracolumbar system, the goal was to develop a comprehensive yet simple classification system with high intra- and interobserver reliability to be used

  9. A Classification Scheme for Production System Processes

    Sørensen, Daniel Grud Hellerup; Brunø, Thomas Ditlev; Nielsen, Kjeld

    2018-01-01

    Manufacturing companies often have difficulties developing production platforms, partly due to the complexity of many production systems and difficulty determining which processes constitute a platform. Understanding production processes is an important step to identifying candidate processes...... for a production platform based on existing production systems. Reviewing a number of existing classifications and taxonomies, a consolidated classification scheme for processes in production of discrete products has been outlined. The classification scheme helps ensure consistency during mapping of existing...

  10. 76 FR 22322 - Medical Devices; Immunology and Microbiology Devices; Classification of Ovarian Adnexal Mass...

    2011-04-21

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 866 [Docket No. FDA-2010-N-0026] Medical Devices; Immunology and Microbiology Devices; Classification of Ovarian Adnexal Mass Assessment Score Test System; Correction AGENCY: Food and Drug Administration, HHS. ACTION...

  11. Minimum critical mass systems

    Dam, H. van; Leege, P.F.A. de

    1987-01-01

    An analysis is presented of thermal systems with minimum critical mass, based on the use of materials with optimum neutron moderating and reflecting properties. The optimum fissile material distributions in the systems are obtained by calculations with standard computer codes, extended with a routine for flat fuel importance search. It is shown that in the minimum critical mass configuration a considerable part of the fuel is positioned in the reflector region. For 239 Pu a minimum critical mass of 87 g is found, which is the lowest value reported hitherto. (author)

  12. Discriminant forest classification method and system

    Chen, Barry Y.; Hanley, William G.; Lemmond, Tracy D.; Hiller, Lawrence J.; Knapp, David A.; Mugge, Marshall J.

    2012-11-06

    A hybrid machine learning methodology and system for classification that combines classical random forest (RF) methodology with discriminant analysis (DA) techniques to provide enhanced classification capability. A DA technique which uses feature measurements of an object to predict its class membership, such as linear discriminant analysis (LDA) or Andersen-Bahadur linear discriminant technique (AB), is used to split the data at each node in each of its classification trees to train and grow the trees and the forest. When training is finished, a set of n DA-based decision trees of a discriminant forest is produced for use in predicting the classification of new samples of unknown class.

  13. A new qualitative pattern classification of shear wave elastograghy for solid breast mass evaluation

    Cong, Rui, E-mail: congrui2684@163.com; Li, Jing, E-mail: lijing@sj-hospital.org; Guo, Song, E-mail: 21751735@qq.com

    2017-02-15

    Highlights: • Qualitative SWE classification proposed here was significantly better than quantitative SWE parameters. • Qualitative classification proposed here was better than the classification proposed before. • Qualitative classification proposed here could obtain higher specificity without a loss of sensitivity. - Abstract: Objectives: To examine the efficacy of qualitative shear wave elastography (SWE) in the classification and evaluation of solid breast masses, and to compare this method with conventional ultrasonograghy (US), quantitative SWE parameters and qualitative SWE classification proposed before. Methods: From April 2015 to March 2016, 314 consecutive females with 325 breast masses who decided to undergo core needle biopsy and/or surgical biopsy were enrolled. Conventional US and SWE were previously performed in all enrolled subjects. Each mass was classified by two different qualitative classifications. One was established in our study, herein named the Qual1. Qual1 could classify the SWE images into five color patterns by the visual evaluations: Color pattern 1 (homogeneous pattern); Color pattern 2 (comparative homogeneous pattern); Color pattern 3 (irregularly heterogeneous pattern); Color pattern 4 (intralesional echo pattern); and Color pattern 5 (the stiff rim sign pattern). The second qualitative classification was named Qual2 here, and included a four-color overlay pattern classification (Tozaki and Fukuma, Acta Radiologica, 2011). The Breast Imaging Reporting and Data System (BI-RADS) assessment and quantitative SWE parameters were recorded. Diagnostic performances of conventional US, SWE parameters, and combinations of US and SWE parameters were compared. Results: With pathological results as the gold standard, of the 325 examined breast masses, 139 (42.77%) samples were malignant and 186 (57.23%) were benign. The Qual1 showed a higher Az value than the Qual2 and quantitative SWE parameters (all P < 0.05). When applying Qual1

  14. A new qualitative pattern classification of shear wave elastograghy for solid breast mass evaluation

    Cong, Rui; Li, Jing; Guo, Song

    2017-01-01

    Highlights: • Qualitative SWE classification proposed here was significantly better than quantitative SWE parameters. • Qualitative classification proposed here was better than the classification proposed before. • Qualitative classification proposed here could obtain higher specificity without a loss of sensitivity. - Abstract: Objectives: To examine the efficacy of qualitative shear wave elastography (SWE) in the classification and evaluation of solid breast masses, and to compare this method with conventional ultrasonograghy (US), quantitative SWE parameters and qualitative SWE classification proposed before. Methods: From April 2015 to March 2016, 314 consecutive females with 325 breast masses who decided to undergo core needle biopsy and/or surgical biopsy were enrolled. Conventional US and SWE were previously performed in all enrolled subjects. Each mass was classified by two different qualitative classifications. One was established in our study, herein named the Qual1. Qual1 could classify the SWE images into five color patterns by the visual evaluations: Color pattern 1 (homogeneous pattern); Color pattern 2 (comparative homogeneous pattern); Color pattern 3 (irregularly heterogeneous pattern); Color pattern 4 (intralesional echo pattern); and Color pattern 5 (the stiff rim sign pattern). The second qualitative classification was named Qual2 here, and included a four-color overlay pattern classification (Tozaki and Fukuma, Acta Radiologica, 2011). The Breast Imaging Reporting and Data System (BI-RADS) assessment and quantitative SWE parameters were recorded. Diagnostic performances of conventional US, SWE parameters, and combinations of US and SWE parameters were compared. Results: With pathological results as the gold standard, of the 325 examined breast masses, 139 (42.77%) samples were malignant and 186 (57.23%) were benign. The Qual1 showed a higher Az value than the Qual2 and quantitative SWE parameters (all P < 0.05). When applying Qual1

  15. Music Genre Classification Systems - A Computational Approach

    Ahrendt, Peter

    2006-01-01

    Automatic music genre classification is the classification of a piece of music into its corresponding genre (such as jazz or rock) by a computer. It is considered to be a cornerstone of the research area Music Information Retrieval (MIR) and closely linked to the other areas in MIR. It is thought...... that MIR will be a key element in the processing, searching and retrieval of digital music in the near future. This dissertation is concerned with music genre classification systems and in particular systems which use the raw audio signal as input to estimate the corresponding genre. This is in contrast...... to systems which use e.g. a symbolic representation or textual information about the music. The approach to music genre classification systems has here been system-oriented. In other words, all the different aspects of the systems have been considered and it is emphasized that the systems should...

  16. Evaluation of classification systems for nonspecific idiopathic orbital inflammation

    Bijlsma, Ward R.; van 't Hullenaar, Fleur C.; Mourits, Maarten P.; Kalmann, Rachel

    2012-01-01

    To systematically analyze existing classification systems for idiopathic orbital inflammation (IOI) and propose and test a new best practice classification system. A systematic literature search was conducted to find all studies that described and applied a classification system for IOI.

  17. QA CLASSIFICATION ANALYSIS OF GROUND SUPPORT SYSTEMS

    D. W. Gwyn

    1996-01-01

    The purpose and objective of this analysis is to determine if the permanent function Ground Support Systems (CI: BABEEOOOO) are quality-affecting items and if so, to establish the appropriate Quality Assurance (QA) classification

  18. Land Cover - Minnesota Land Cover Classification System

    Minnesota Department of Natural Resources — Land cover data set based on the Minnesota Land Cover Classification System (MLCCS) coding scheme. This data was produced using a combination of aerial photograph...

  19. A Confidence Paradigm for Classification Systems

    2008-09-01

    methodology to determine how much confi- dence one should have in a classifier output. This research proposes a framework to determine the level of...theoretical framework that attempts to unite the viewpoints of the classification system developer (or engineer) and the classification system user (or...operating point. An algorithm is developed that minimizes a “confidence” measure called Binned Error in the Posterior ( BEP ). Then, we prove that training a

  20. A statistical approach to root system classification.

    Gernot eBodner

    2013-08-01

    Full Text Available Plant root systems have a key role in ecology and agronomy. In spite of fast increase in root studies, still there is no classification that allows distinguishing among distinctive characteristics within the diversity of rooting strategies. Our hypothesis is that a multivariate approach for plant functional type identification in ecology can be applied to the classification of root systems. We demonstrate that combining principal component and cluster analysis yields a meaningful classification of rooting types based on morphological traits. The classification method presented is based on a data-defined statistical procedure without a priori decision on the classifiers. Biplot inspection is used to determine key traits and to ensure stability in cluster based grouping. The classification method is exemplified with simulated root architectures and morphological field data. Simulated root architectures showed that morphological attributes with spatial distribution parameters capture most distinctive features within root system diversity. While developmental type (tap vs. shoot-borne systems is a strong, but coarse classifier, topological traits provide the most detailed differentiation among distinctive groups. Adequacy of commonly available morphologic traits for classification is supported by field data. Three rooting types emerged from measured data, distinguished by diameter/weight, density and spatial distribution respectively. Similarity of root systems within distinctive groups was the joint result of phylogenetic relation and environmental as well as human selection pressure. We concluded that the data-define classification is appropriate for integration of knowledge obtained with different root measurement methods and at various scales. Currently root morphology is the most promising basis for classification due to widely used common measurement protocols. To capture details of root diversity efforts in architectural measurement

  1. Classification of mammographic masses using generalized dynamic fuzzy neural networks

    Lim, Wei Keat; Er, Meng Joo

    2004-01-01

    In this article, computer-aided classification of mammographic masses using generalized dynamic fuzzy neural networks (GDFNN) is presented. The texture parameters, derived from first-order gradient distribution and gray-level co-occurrence matrices, were computed from the regions of interest. A total of 343 images containing 180 benign masses and 163 malignant masses from the Digital Database for Screening Mammography were analyzed. A fast approach of automatically generating fuzzy rules from training samples was implemented to classify tumors. This work is novel in that it alleviates the problem of requiring a designer to examine all the input-output relationships of a training database in order to obtain the most appropriate structure for the classifier in a conventional computer-aided diagnosis. In this approach, not only the connection weights can be adjusted, but also the structure can be self-adaptive during the learning process. By virtue of the automatic generation of the classifier by the GDFNN learning algorithm, the area under the receiver-operating characteristic curve, A z , attains 0.868±0.020, which corresponds to a true-positive fraction of 95.0% at a false positive fraction of 52.8%. The corresponding accuracy is 70.0%, the positive predictive value is 62.0%, and the negative predictive value is 91.4%

  2. Classification

    Clary, Renee; Wandersee, James

    2013-01-01

    In this article, Renee Clary and James Wandersee describe the beginnings of "Classification," which lies at the very heart of science and depends upon pattern recognition. Clary and Wandersee approach patterns by first telling the story of the "Linnaean classification system," introduced by Carl Linnacus (1707-1778), who is…

  3. Feature selection and nearest centroid classification for protein mass spectrometry

    Levner Ilya

    2005-03-01

    Full Text Available Abstract Background The use of mass spectrometry as a proteomics tool is poised to revolutionize early disease diagnosis and biomarker identification. Unfortunately, before standard supervised classification algorithms can be employed, the "curse of dimensionality" needs to be solved. Due to the sheer amount of information contained within the mass spectra, most standard machine learning techniques cannot be directly applied. Instead, feature selection techniques are used to first reduce the dimensionality of the input space and thus enable the subsequent use of classification algorithms. This paper examines feature selection techniques for proteomic mass spectrometry. Results This study examines the performance of the nearest centroid classifier coupled with the following feature selection algorithms. Student-t test, Kolmogorov-Smirnov test, and the P-test are univariate statistics used for filter-based feature ranking. From the wrapper approaches we tested sequential forward selection and a modified version of sequential backward selection. Embedded approaches included shrunken nearest centroid and a novel version of boosting based feature selection we developed. In addition, we tested several dimensionality reduction approaches, namely principal component analysis and principal component analysis coupled with linear discriminant analysis. To fairly assess each algorithm, evaluation was done using stratified cross validation with an internal leave-one-out cross-validation loop for automated feature selection. Comprehensive experiments, conducted on five popular cancer data sets, revealed that the less advocated sequential forward selection and boosted feature selection algorithms produce the most consistent results across all data sets. In contrast, the state-of-the-art performance reported on isolated data sets for several of the studied algorithms, does not hold across all data sets. Conclusion This study tested a number of popular feature

  4. Analysis of steranes and triterpanes in geolipid extracts by automatic classification of mass spectra

    Wardroper, A. M. K.; Brooks, P. W.; Humberston, M. J.; Maxwell, J. R.

    1977-01-01

    A computer method is described for the automatic classification of triterpanes and steranes into gross structural type from their mass spectral characteristics. The method has been applied to the spectra obtained by gas-chromatographic/mass-spectroscopic analysis of two mixtures of standards and of hydrocarbon fractions isolated from Green River and Messel oil shales. Almost all of the steranes and triterpanes identified previously in both shales were classified, in addition to a number of new components. The results indicate that classification of such alkanes is possible with a laboratory computer system. The method has application to diagenesis and maturation studies as well as to oil/oil and oil/source rock correlations in which rapid screening of large numbers of samples is required.

  5. An evaluation of classification systems for stillbirth

    Pattinson Robert

    2009-06-01

    Full Text Available Abstract Background Audit and classification of stillbirths is an essential part of clinical practice and a crucial step towards stillbirth prevention. Due to the limitations of the ICD system and lack of an international approach to an acceptable solution, numerous disparate classification systems have emerged. We assessed the performance of six contemporary systems to inform the development of an internationally accepted approach. Methods We evaluated the following systems: Amended Aberdeen, Extended Wigglesworth; PSANZ-PDC, ReCoDe, Tulip and CODAC. Nine teams from 7 countries applied the classification systems to cohorts of stillbirths from their regions using 857 stillbirth cases. The main outcome measures were: the ability to retain the important information about the death using the InfoKeep rating; the ease of use according to the Ease rating (both measures used a five-point scale with a score Results InfoKeep scores were significantly different across the classifications (p ≤ 0.01 due to low scores for Wigglesworth and Aberdeen. CODAC received the highest mean (SD score of 3.40 (0.73 followed by PSANZ-PDC, ReCoDe and Tulip [2.77 (1.00, 2.36 (1.21, 1.92 (1.24 respectively]. Wigglesworth and Aberdeen resulted in a high proportion of unexplained stillbirths and CODAC and Tulip the lowest. While Ease scores were different (p ≤ 0.01, all systems received satisfactory scores; CODAC received the highest score. Aberdeen and Wigglesworth showed poor agreement with kappas of 0.35 and 0.25 respectively. Tulip performed best with a kappa of 0.74. The remainder had good to fair agreement. Conclusion The Extended Wigglesworth and Amended Aberdeen systems cannot be recommended for classification of stillbirths. Overall, CODAC performed best with PSANZ-PDC and ReCoDe performing well. Tulip was shown to have the best agreement and a low proportion of unexplained stillbirths. The virtues of these systems need to be considered in the development of an

  6. An evaluation of classification systems for stillbirth.

    Flenady, Vicki; Frøen, J Frederik; Pinar, Halit; Torabi, Rozbeh; Saastad, Eli; Guyon, Grace; Russell, Laurie; Charles, Adrian; Harrison, Catherine; Chauke, Lawrence; Pattinson, Robert; Koshy, Rachel; Bahrin, Safiah; Gardener, Glenn; Day, Katie; Petersson, Karin; Gordon, Adrienne; Gilshenan, Kristen

    2009-06-19

    Audit and classification of stillbirths is an essential part of clinical practice and a crucial step towards stillbirth prevention. Due to the limitations of the ICD system and lack of an international approach to an acceptable solution, numerous disparate classification systems have emerged. We assessed the performance of six contemporary systems to inform the development of an internationally accepted approach. We evaluated the following systems: Amended Aberdeen, Extended Wigglesworth; PSANZ-PDC, ReCoDe, Tulip and CODAC. Nine teams from 7 countries applied the classification systems to cohorts of stillbirths from their regions using 857 stillbirth cases. The main outcome measures were: the ability to retain the important information about the death using the InfoKeep rating; the ease of use according to the Ease rating (both measures used a five-point scale with a score <2 considered unsatisfactory); inter-observer agreement and the proportion of unexplained stillbirths. A randomly selected subset of 100 stillbirths was used to assess inter-observer agreement. InfoKeep scores were significantly different across the classifications (p < or = 0.01) due to low scores for Wigglesworth and Aberdeen. CODAC received the highest mean (SD) score of 3.40 (0.73) followed by PSANZ-PDC, ReCoDe and Tulip [2.77 (1.00), 2.36 (1.21), 1.92 (1.24) respectively]. Wigglesworth and Aberdeen resulted in a high proportion of unexplained stillbirths and CODAC and Tulip the lowest. While Ease scores were different (p < or = 0.01), all systems received satisfactory scores; CODAC received the highest score. Aberdeen and Wigglesworth showed poor agreement with kappas of 0.35 and 0.25 respectively. Tulip performed best with a kappa of 0.74. The remainder had good to fair agreement. The Extended Wigglesworth and Amended Aberdeen systems cannot be recommended for classification of stillbirths. Overall, CODAC performed best with PSANZ-PDC and ReCoDe performing well. Tulip was shown to have the

  7. Fission--fusion systems: classification and critique

    Lidsky, L.M.

    1974-01-01

    A useful classification scheme for hybrid systems is described and some common features that the scheme makes apparent are pointed out. The early history of fusion-fission systems is reviewed. Some designs are described along with advantages and disadvantages of each. The extension to low and moderate Q devices is noted. (U.S.)

  8. Mapping a classification system to architectural education

    Hermund, Anders; Klint, Lars; Rostrup, Nicolai

    2015-01-01

    This paper examines to what extent a new classification system, Cuneco Classification System, CCS, proves useful in the education of architects, and to what degree the aim of an architectural education, rather based on an arts and crafts approach than a polytechnic approach, benefits from...... the distinct terminology of the classification system. The method used to examine the relationship between education, practice and the CCS bifurcates in a quantitative and a qualitative exploration: Quantitative comparison of the curriculum with the students’ own descriptions of their studies through...... a questionnaire survey among 88 students in graduate school. Qualitative interviews with a handful of practicing architects, to be able to cross check the relevance of the education with the profession. The examination indicates the need of a new definition, in addition to the CCS’s scale, covering the earliest...

  9. Landslide susceptibility assessment using logistic regression and its comparison with a rock mass classification system, along a road section in the northern Himalayas (India)

    Das, Iswar; Sahoo, Sashikant; van Westen, Cees; Stein, Alfred; Hack, Robert

    2010-02-01

    Landslide studies are commonly guided by ground knowledge and field measurements of rock strength and slope failure criteria. With increasing sophistication of GIS-based statistical methods, however, landslide susceptibility studies benefit from the integration of data collected from various sources and methods at different scales. This study presents a logistic regression method for landslide susceptibility mapping and verifies the result by comparing it with the geotechnical-based slope stability probability classification (SSPC) methodology. The study was carried out in a landslide-prone national highway road section in the northern Himalayas, India. Logistic regression model performance was assessed by the receiver operator characteristics (ROC) curve, showing an area under the curve equal to 0.83. Field validation of the SSPC results showed a correspondence of 72% between the high and very high susceptibility classes with present landslide occurrences. A spatial comparison of the two susceptibility maps revealed the significance of the geotechnical-based SSPC method as 90% of the area classified as high and very high susceptible zones by the logistic regression method corresponds to the high and very high class in the SSPC method. On the other hand, only 34% of the area classified as high and very high by the SSPC method falls in the high and very high classes of the logistic regression method. The underestimation by the logistic regression method can be attributed to the generalisation made by the statistical methods, so that a number of slopes existing in critical equilibrium condition might not be classified as high or very high susceptible zones.

  10. A proposed United States resource classification system

    Masters, C.D.

    1980-01-01

    Energy is a world-wide problem calling for world-wide communication to resolve the many supply and distribution problems. Essential to a communication problem are a definition and comparability of elements being communicated. The US Geological Survey, with the co-operation of the US Bureau of Mines and the US Department of Energy, has devised a classification system for all mineral resources, the principles of which, it is felt, offer the possibility of world communication. At present several other systems, extant or under development (Potential Gas Committee of the USA, United Nations Resource Committee, and the American Society of Testing and Materials) are internally consistent and provide easy communication linkage. The system in use by the uranium community in the United States of America, however, ties resource quantities to forward-cost dollar values rendering them inconsistent with other classifications and therefore not comparable. This paper develops the rationale for the new USGS resource classification and notes its benefits relative to a forward-cost classification and its relationship specifically to other current classifications. (author)

  11. CLASSIFICATION OF THE MGR MUCK HANDLING SYSTEM

    R. Garrett

    1999-01-01

    The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) muck handling system structures, systems and components (SSCs) performed by the MGR Safety Assurance Department. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMP 1998). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333P, ''Quality Assurance Requirements and Description (QARD) (DOE 1998). This QA classification incorporates the current MGR design and the results of the ''Preliminary Preclosure Design Basis Event Calculations for the Monitored Geologic Repository (CRWMS M and O 1998a)

  12. Classification of jet fuels by fuzzy rule-building expert systems applied to three-way data by fast gas chromatography--fast scanning quadrupole ion trap mass spectrometry.

    Sun, Xiaobo; Zimmermann, Carolyn M; Jackson, Glen P; Bunker, Christopher E; Harrington, Peter B

    2011-01-30

    A fast method that can be used to classify unknown jet fuel types or detect possible property changes in jet fuel physical properties is of paramount interest to national defense and the airline industries. While fast gas chromatography (GC) has been used with conventional mass spectrometry (MS) to study jet fuels, fast GC was combined with fast scanning MS and used to classify jet fuels into lot numbers or origin for the first time by using fuzzy rule-building expert system (FuRES) classifiers. In the process of building classifiers, the data were pretreated with and without wavelet transformation and evaluated with respect to performance. Principal component transformation was used to compress the two-way data images prior to classification. Jet fuel samples were successfully classified with 99.8 ± 0.5% accuracy for both with and without wavelet compression. Ten bootstrapped Latin partitions were used to validate the generalized prediction accuracy. Optimized partial least squares (o-PLS) regression results were used as positively biased references for comparing the FuRES prediction results. The prediction results for the jet fuel samples obtained with these two methods were compared statistically. The projected difference resolution (PDR) method was also used to evaluate the fast GC and fast MS data. Two batches of aliquots of ten new samples were prepared and run independently 4 days apart to evaluate the robustness of the method. The only change in classification parameters was the use of polynomial retention time alignment to correct for drift that occurred during the 4-day span of the two collections. FuRES achieved perfect classifications for four models of uncompressed three-way data. This fast GC/fast MS method furnishes characteristics of high speed, accuracy, and robustness. This mode of measurement may be useful as a monitoring tool to track changes in the chemical composition of fuels that may also lead to property changes. Copyright © 2010

  13. Classification of ERP System Services

    Petr Sodomka

    2016-07-01

    Full Text Available Today the ERP business information systems are an essential tool for organization management, regardless of size and field of activity. Their successful implementation and use is conditioned predominantly by IS/ICT knowledge and managerial skills required for directing their life cycle correctly. Defining and correct setting of the service level is a key requirement and skill, usually provided by a service provider based on an implementation and service contract, or an advisory organization, in particular when presale services concerning analyses and tender documentation processing are provided. The following paper discusses the characteristics of the individual service types and the particulars of their practical use. Moreover, it presents the selected significant results of the long-term research performed by the authors in the Center for inVestigations into Information Systems.

  14. The development of a classification system for inland aquatic ...

    A classification system is described that was developed for inland aquatic ecosystems in South Africa, including wetlands. The six-tiered classification system is based on a top-down, hierarchical classification of aquatic ecosystems, following the functionally-oriented hydrogeomorphic (HGM) approach to classification but ...

  15. Common occupational classification system - revision 3

    Stahlman, E.J.; Lewis, R.E.

    1996-05-01

    Workforce planning has become an increasing concern within the DOE community as the Office of Environmental Restoration and Waste Management (ER/WM or EM) seeks to consolidate and refocus its activities and the Office of Defense Programs (DP) closes production sites. Attempts to manage the growth and skills mix of the EM workforce while retaining the critical skills of the DP workforce have been difficult due to the lack of a consistent set of occupational titles and definitions across the complex. Two reasons for this difficulty may be cited. First, classification systems commonly used in industry often fail to cover in sufficient depth the unique demands of DOE`s nuclear energy and research community. Second, the government practice of contracting the operation of government facilities to the private sector has introduced numerous contractor-specific classification schemes to the DOE complex. As a result, sites/contractors report their workforce needs using unique classification systems. It becomes difficult, therefore, to roll these data up to the national level necessary to support strategic planning and analysis. The Common Occupational Classification System (COCS) is designed to overcome these workforce planning barriers. The COCS is based on earlier workforce planning activities and the input of technical, workforce planning, and human resource managers from across the DOE complex. It provides a set of mutually-exclusive occupation titles and definitions that cover the broad range of activities present in the DOE complex. The COCS is not a required record-keeping or data management guide. Neither is it intended to replace contractor/DOE-specific classification systems. Instead, the system provides a consistent, high- level, functional structure of occupations to which contractors can crosswalk (map) their job titles.

  16. CLASSIFICATION OF THE MGR SITE LAYOUT SYSTEM

    S.E. Salzman

    1999-01-01

    The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) site layout system structures, systems and components (SSCs) performed by the MGR Safety Assurance Department. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMP 1998). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333P, ''Quality Assurance Requirements and Description'' (QARD) (DOE 1998)

  17. CLASSIFICATION OF THE MGR OFFSITE UTILITIES SYSTEM

    J.A. Ziegler

    1999-01-01

    The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) offsite utilities system structures, systems and components (SSCs) performed by the MGR Safety Assurance Department. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMP 1998). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333P, ''Quality Assurance Requirements and Description'' (QARD) (DOE 1998)

  18. CLASSIFICATION OF THE MGR SITE OPERATIONS SYSTEM

    J.A. Ziegler

    1999-01-01

    The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) site operations system structures, systems and components (SSCs) performed by the MGR Safety Assurance Department. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMP 1998). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333P, ''Quality Assurance Requirements and Description'' (QARD) (DOE 1998)

  19. CLASSIFICATION OF THE MGR SUBSURFACE VENTILATION SYSTEM

    R.J. Garrett

    1999-01-01

    The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) subsurface ventilation system structures, systems and components (SSCs) performed by the MGR Safety Assurance Department. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMP 1998). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333P7 ''Quality Assurance Requirements and Description'' (QARD) (DOE 1998)

  20. Classification of the MGR Assembly Transfer System

    S.E. Salzman

    1999-01-01

    The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) assembly transfer system structures, systems and components (SSCs) performed by the MGR Safety Assurance Department. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMP 1998). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333P, ''Quality Assurance Requirements and Description'' (QARD) (DOE 1998)

  1. CLASSIFICATION OF THE MGR SITE WATER SYSTEM

    J.A. Ziegler

    1999-01-01

    The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) site water system structures, systems and components (SSCs) performed by the MGR Safety Assurance Department. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMP 1998). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333P, ''Quality Assurance Requirements and Description'' (QARD) (DOE 1998)

  2. CLASSIFICATION OF THE MGR EMERGENCY RESPONSE SYSTEM

    Zeigler, J.A.

    1999-01-01

    The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) emergency response system structures, systems and components (SSCs) performed by the MGR Safety Assurance Department. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMP 1998). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333P7 ''Quality Assurance Requirements and Description'' (QARD) (DOE 1998)

  3. CLASSIFICATION OF THE MGR SUBSURFACE EXCAVATION SYSTEM

    R. Garrett

    1999-01-01

    The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) subsurface excavation system structures, systems and components (SSCs) performed by the MGR Safety Assurance Department. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMP 1998). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333P, ''Quality Assurance Requirements and Description'' (QARD) (DOE 1998)

  4. Automotive System for Remote Surface Classification.

    Bystrov, Aleksandr; Hoare, Edward; Tran, Thuy-Yung; Clarke, Nigel; Gashinova, Marina; Cherniakov, Mikhail

    2017-04-01

    In this paper we shall discuss a novel approach to road surface recognition, based on the analysis of backscattered microwave and ultrasonic signals. The novelty of our method is sonar and polarimetric radar data fusion, extraction of features for separate swathes of illuminated surface (segmentation), and using of multi-stage artificial neural network for surface classification. The developed system consists of 24 GHz radar and 40 kHz ultrasonic sensor. The features are extracted from backscattered signals and then the procedures of principal component analysis and supervised classification are applied to feature data. The special attention is paid to multi-stage artificial neural network which allows an overall increase in classification accuracy. The proposed technique was tested for recognition of a large number of real surfaces in different weather conditions with the average accuracy of correct classification of 95%. The obtained results thereby demonstrate that the use of proposed system architecture and statistical methods allow for reliable discrimination of various road surfaces in real conditions.

  5. The new vitrinite classification (ICCP System 1994)

    NONE

    1998-04-01

    This paper has been prepared by the International Committee for Coal and Organic Petrology (ICCP). Within the new vitrinite classification (ICCP System 1994) the maceral group vitrinite is divided into three subgroups, telovitrinite, detrovitrinite and gelovitrinite, which are each further sub-divided into two macerals. The dominant parameter for these newly ordered and in part newly defined sub-groups is the degree of destruction (degradation), whereas the macerals can be further distinguished by their morphological characteristics and their degree of gelificiation. The new system is furthermore related more closely to the huminite classification system still in use and a future one to be published by the ICCP. 69 refs., 2 figs., 2 tabs.

  6. Intelligent Computer Vision System for Automated Classification

    Jordanov, Ivan; Georgieva, Antoniya

    2010-01-01

    In this paper we investigate an Intelligent Computer Vision System applied for recognition and classification of commercially available cork tiles. The system is capable of acquiring and processing gray images using several feature generation and analysis techniques. Its functionality includes image acquisition, feature extraction and preprocessing, and feature classification with neural networks (NN). We also discuss system test and validation results from the recognition and classification tasks. The system investigation also includes statistical feature processing (features number and dimensionality reduction techniques) and classifier design (NN architecture, target coding, learning complexity and performance, and training with our own metaheuristic optimization method). The NNs trained with our genetic low-discrepancy search method (GLPτS) for global optimisation demonstrated very good generalisation abilities. In our view, the reported testing success rate of up to 95% is due to several factors: combination of feature generation techniques; application of Analysis of Variance (ANOVA) and Principal Component Analysis (PCA), which appeared to be very efficient for preprocessing the data; and use of suitable NN design and learning method.

  7. Galaxy And Mass Assembly: automatic morphological classification of galaxies using statistical learning

    Sreejith, Sreevarsha; Pereverzyev, Sergiy, Jr.; Kelvin, Lee S.; Marleau, Francine R.; Haltmeier, Markus; Ebner, Judith; Bland-Hawthorn, Joss; Driver, Simon P.; Graham, Alister W.; Holwerda, Benne W.; Hopkins, Andrew M.; Liske, Jochen; Loveday, Jon; Moffett, Amanda J.; Pimbblet, Kevin A.; Taylor, Edward N.; Wang, Lingyu; Wright, Angus H.

    2018-03-01

    We apply four statistical learning methods to a sample of 7941 galaxies (z test the feasibility of using automated algorithms to classify galaxies. Using 10 features measured for each galaxy (sizes, colours, shape parameters, and stellar mass), we apply the techniques of Support Vector Machines, Classification Trees, Classification Trees with Random Forest (CTRF) and Neural Networks, and returning True Prediction Ratios (TPRs) of 75.8 per cent, 69.0 per cent, 76.2 per cent, and 76.0 per cent, respectively. Those occasions whereby all four algorithms agree with each other yet disagree with the visual classification (`unanimous disagreement') serves as a potential indicator of human error in classification, occurring in ˜ 9 per cent of ellipticals, ˜ 9 per cent of little blue spheroids, ˜ 14 per cent of early-type spirals, ˜ 21 per cent of intermediate-type spirals, and ˜ 4 per cent of late-type spirals and irregulars. We observe that the choice of parameters rather than that of algorithms is more crucial in determining classification accuracy. Due to its simplicity in formulation and implementation, we recommend the CTRF algorithm for classifying future galaxy data sets. Adopting the CTRF algorithm, the TPRs of the five galaxy types are : E, 70.1 per cent; LBS, 75.6 per cent; S0-Sa, 63.6 per cent; Sab-Scd, 56.4 per cent, and Sd-Irr, 88.9 per cent. Further, we train a binary classifier using this CTRF algorithm that divides galaxies into spheroid-dominated (E, LBS, and S0-Sa) and disc-dominated (Sab-Scd and Sd-Irr), achieving an overall accuracy of 89.8 per cent. This translates into an accuracy of 84.9 per cent for spheroid-dominated systems and 92.5 per cent for disc-dominated systems.

  8. Search techniques in intelligent classification systems

    Savchenko, Andrey V

    2016-01-01

    A unified methodology for categorizing various complex objects is presented in this book. Through probability theory, novel asymptotically minimax criteria suitable for practical applications in imaging and data analysis are examined including the special cases such as the Jensen-Shannon divergence and the probabilistic neural network. An optimal approximate nearest neighbor search algorithm, which allows faster classification of databases is featured. Rough set theory, sequential analysis and granular computing are used to improve performance of the hierarchical classifiers. Practical examples in face identification (including deep neural networks), isolated commands recognition in voice control system and classification of visemes captured by the Kinect depth camera are included. This approach creates fast and accurate search procedures by using exact probability densities of applied dissimilarity measures. This book can be used as a guide for independent study and as supplementary material for a technicall...

  9. Rock Mass Classification of Karstic Terrain in the Reservoir Slopes of Tekeze Hydropower Project

    Hailemariam Gugsa, Trufat; Schneider, Jean Friedrich

    2010-05-01

    Hydropower reservoirs in deep gorges usually experience slope failures and mass movements. History also showed that some of these projects suffered severe landslides, which left lots of victims and enormous economic loss. Thus, it became vital to make substantial slope stability studies in such reservoirs to ensure safe project development. This study also presents a regional scale instability assessment of the Tekeze Hydropower reservoir slopes. Tekeze hydropower project is a newly constructed double arch dam that completed in August 2009. It is developed on Tekeze River, tributary of Blue Nile River that runs across the northern highlands of Ethiopia. It cuts a savage gorge 2000m deep, the deepest canyon in Africa. The dam is the highest dam in Ethiopia at 188m, 10 m higher than China's Three Gorges Dam. It is being developed by Chinese company at a cost of US350M. The reservoir is designed at 1140 m elevation, as retention level to store more than 9000 million m3 volume of water that covers an area of 150 km2, mainly in channel filling form. In this study, generation of digital elevation model from ASTER satellite imagery and surface field investigation is initially considered for further image processing and terrain parameters' analyses. Digitally processed multi spectral ASTER ortho-images drape over the DEM are used to have different three dimensional perspective views in interpreting lithological, structural and geomorphological features, which are later verified by field mapping. Terrain slopes are also delineated from the relief scene. A GIS database is ultimately developed to facilitate the delineation of geotechnical units for slope rock mass classification. Accordingly, 83 geotechnical units are delineated and, within them, 240 measurement points are established to quantify in-situ geotechnical parameters. Due to geotechnical uncertainties, four classification systems; namely geomorphic rock mass strength classification (RMS), slope mass rating (SMR

  10. A system for heart sounds classification.

    Grzegorz Redlarski

    Full Text Available The future of quick and efficient disease diagnosis lays in the development of reliable non-invasive methods. As for the cardiac diseases - one of the major causes of death around the globe - a concept of an electronic stethoscope equipped with an automatic heart tone identification system appears to be the best solution. Thanks to the advancement in technology, the quality of phonocardiography signals is no longer an issue. However, appropriate algorithms for auto-diagnosis systems of heart diseases that could be capable of distinguishing most of known pathological states have not been yet developed. The main issue is non-stationary character of phonocardiography signals as well as a wide range of distinguishable pathological heart sounds. In this paper a new heart sound classification technique, which might find use in medical diagnostic systems, is presented. It is shown that by combining Linear Predictive Coding coefficients, used for future extraction, with a classifier built upon combining Support Vector Machine and Modified Cuckoo Search algorithm, an improvement in performance of the diagnostic system, in terms of accuracy, complexity and range of distinguishable heart sounds, can be made. The developed system achieved accuracy above 93% for all considered cases including simultaneous identification of twelve different heart sound classes. The respective system is compared with four different major classification methods, proving its reliability.

  11. The classification of ambiguity in polarimetric reconstruction of coronal mass ejection

    Dai, Xinghua; Wang, Huaning; Huang, Xin; Du, Zhanle; He, Han

    2014-01-01

    The Thomson scattering theory indicates that there exist explicit and implicit ambiguities in polarimetric analyses of coronal mass ejection (CME) observations. We suggest a classification for these ambiguities in CME reconstruction. Three samples, including double explicit, mixed, and double implicit ambiguity, are shown with the polarimetric analyses of STEREO CME observations. These samples demonstrate that this classification is helpful for improving polarimetric reconstruction.

  12. Explosives Classifications Tracking System User Manual

    Genoni, R.P.

    1993-10-01

    The Explosives Classification Tracking System (ECTS) presents information and data for U.S. Department of Energy (DOE) explosives classifications of interest to EM-561, Transportation Management Division, other DOE facilities, and contractors. It is intended to be useful to the scientist, engineer, and transportation professional, who needs to classify or transport explosives. This release of the ECTS reflects upgrading of the software which provides the user with an environment that makes comprehensive retrieval of explosives related information quick and easy. Quarterly updates will be provided to the ECTS throughout its development in FY 1993 and thereafter. The ECTS is a stand alone, single user system that contains unclassified, publicly available information, and administrative information (contractor names, product descriptions, transmittal dates, EX-Numbers, etc.) information from many sources for non-decisional engineering and shipping activities. The data is the most up-to-date and accurate available to the knowledge of the system developer. The system is designed to permit easy revision and updating as new information and data become available. These, additions and corrections are welcomed by the developer. This user manual is intended to help the user install, understand, and operate the system so that the desired information may be readily obtained, reviewed, and reported.

  13. Extensions to the Speech Disorders Classification System (SDCS)

    Shriberg, Lawrence D.; Fourakis, Marios; Hall, Sheryl D.; Karlsson, Heather B.; Lohmeier, Heather L.; McSweeny, Jane L.; Potter, Nancy L.; Scheer-Cohen, Alison R.; Strand, Edythe A.; Tilkens, Christie M.; Wilson, David L.

    2010-01-01

    This report describes three extensions to a classification system for paediatric speech sound disorders termed the Speech Disorders Classification System (SDCS). Part I describes a classification extension to the SDCS to differentiate motor speech disorders from speech delay and to differentiate among three sub-types of motor speech disorders.…

  14. Validation of potential classification criteria for systemic sclerosis.

    Johnson, S.R.; Fransen, J.; Khanna, D.; Baron, M.; Hoogen, F. van den; Medsger TA, J.r.; Peschken, C.A.; Carreira, P.E.; Riemekasten, G.; Tyndall, A.; Matucci-Cerinic, M.; Pope, J.E.

    2012-01-01

    OBJECTIVE: Classification criteria for systemic sclerosis (SSc; scleroderma) are being updated jointly by the American College of Rheumatology and European League Against Rheumatism. Potential items for classification were reduced to 23 using Delphi and nominal group techniques. We evaluated the

  15. Comparison of World Health Organization and Asia-Pacific body mass index classifications in COPD patients

    Lim JU

    2017-08-01

    Full Text Available Jeong Uk Lim,1 Jae Ha Lee,2 Ju Sang Kim,3 Yong Il Hwang,4 Tae-Hyung Kim,5 Seong Yong Lim,6 Kwang Ha Yoo,7 Ki-Suck Jung,4 Young Kyoon Kim,8 Chin Kook Rhee8 1Division of Pulmonary, Critical Care and Sleep Medicine, Department of Internal Medicine, St Paul’s Hospital, College of Medicine, The Catholic University of Korea, 2Division of Pulmonology, Department of Internal Medicine, Inje University College of Medicine, Haeundae Paik Hospital, Busan, 3Division of Pulmonary Medicine, Department of Internal Medicine, Incheon St Mary’s Hospital, College of Medicine, The Catholic University of Korea, Incheon, 4Division of Pulmonary, Allergy and Critical Care Medicine, Department of Internal Medicine, Hallym University Sacred Heart Hospital, Hallym University College of Medicine, Anyang, 5Division of Pulmonary and Critical Care Medicine, Hanyang University Guri Hospital, Hanyang University College of Medicine, Guri, 6Division of Pulmonary and Critical Care Medicine, Department of Medicine, Kangbuk Samsung Hospital, Sungkyunkwan University School of Medicine, 7Division of Pulmonary, Allergy and Critical Care Medicine, Department of Internal Medicine, Konkuk University School of Medicine, 8Division of Pulmonary, Allergy and Critical Care Medicine, Department of Internal Medicine, Seoul St Mary’s Hospital, College of Medicine, The Catholic University of Korea, Seoul, Republic of Korea Introduction: A low body mass index (BMI is associated with increased mortality and low health-related quality of life in patients with COPD. The Asia-Pacific classification of BMI has a lower cutoff for overweight and obese categories compared to the World Health Organization (WHO classification. The present study assessed patients with COPD among different BMI categories according to two BMI classification systems: WHO and Asia-Pacific. Patients and methods: Patients with COPD aged 40 years or older from the Korean COPD Subtype Study cohort were selected for evaluation

  16. Gender classification system in uncontrolled environments

    Zeng, Pingping; Zhang, Yu-Jin; Duan, Fei

    2011-01-01

    Most face analysis systems available today perform mainly on restricted databases of images in terms of size, age, illumination. In addition, it is frequently assumed that all images are frontal and unconcealed. Actually, in a non-guided real-time supervision, the face pictures taken may often be partially covered and with head rotation less or more. In this paper, a special system supposed to be used in real-time surveillance with un-calibrated camera and non-guided photography is described. It mainly consists of five parts: face detection, non-face filtering, best-angle face selection, texture normalization, and gender classification. Emphases are focused on non-face filtering and best-angle face selection parts as well as texture normalization. Best-angle faces are figured out by PCA reconstruction, which equals to an implicit face alignment and results in a huge increase of the accuracy for gender classification. Dynamic skin model and a masked PCA reconstruction algorithm are applied to filter out faces detected in error. In order to fully include facial-texture and shape-outline features, a hybrid feature that is a combination of Gabor wavelet and PHoG (pyramid histogram of gradients) was proposed to equitable inner texture and outer contour. Comparative study on the effects of different non-face filtering and texture masking methods in the context of gender classification by SVM is reported through experiments on a set of UT (a company name) face images, a large number of internet images and CAS (Chinese Academy of Sciences) face database. Some encouraging results are obtained.

  17. London 2012 Paralympic swimming: passive drag and the classification system.

    Oh, Yim-Taek; Burkett, Brendan; Osborough, Conor; Formosa, Danielle; Payton, Carl

    2013-09-01

    The key difference between the Olympic and Paralympic Games is the use of classification systems within Paralympic sports to provide a fair competition for athletes with a range of physical disabilities. In 2009, the International Paralympic Committee mandated the development of new, evidence-based classification systems. This study aims to assess objectively the swimming classification system by determining the relationship between passive drag and level of swimming-specific impairment, as defined by the current swimming class. Data were collected on participants at the London 2012 Paralympic Games. The passive drag force of 113 swimmers (classes 3-14) was measured using an electro-mechanical towing device and load cell. Swimmers were towed on the surface of a swimming pool at 1.5 m/s while holding their most streamlined position. Passive drag ranged from 24.9 to 82.8 N; the normalised drag (drag/mass) ranged from 0.45 to 1.86 N/kg. Significant negative associations were found between drag and the swimming class (τ = -0.41, p < 0.01) and normalised drag and the swimming class (τ = -0.60, p < 0.01). The mean difference in drag between adjacent classes was inconsistent, ranging from 0 N (6 vs 7) to 11.9 N (5 vs 6). Reciprocal Ponderal Index (a measure of slenderness) correlated moderately with normalised drag (r(P) = -0.40, p < 0.01). Although swimmers with the lowest swimming class experienced the highest passive drag and vice versa, the inconsistent difference in mean passive drag between adjacent classes indicates that the current classification system does not always differentiate clearly between swimming groups.

  18. Nuclear reactors transients identification and classification system

    Bianchi, Paulo Henrique

    2008-01-01

    This work describes the study and test of a system capable to identify and classify transients in thermo-hydraulic systems, using a neural network technique of the self-organizing maps (SOM) type, with the objective of implanting it on the new generations of nuclear reactors. The technique developed in this work consists on the use of multiple networks to do the classification and identification of the transient states, being each network a specialist at one respective transient of the system, that compete with each other using the quantization error, that is a measure given by this type of neural network. This technique showed very promising characteristics that allow the development of new functionalities in future projects. One of these characteristics consists on the potential of each network, besides responding what transient is in course, could give additional information about that transient. (author)

  19. Dynamics of Variable Mass Systems

    Eke, Fidelis O.

    1998-01-01

    This report presents the results of an investigation of the effects of mass loss on the attitude behavior of spinning bodies in flight. The principal goal is to determine whether there are circumstances under which the motion of variable mass systems can become unstable in the sense that their transverse angular velocities become unbounded. Obviously, results from a study of this kind would find immediate application in the aerospace field. The first part of this study features a complete and mathematically rigorous derivation of a set of equations that govern both the translational and rotational motions of general variable mass systems. The remainder of the study is then devoted to the application of the equations obtained to a systematic investigation of the effect of various mass loss scenarios on the dynamics of increasingly complex models of variable mass systems. It is found that mass loss can have a major impact on the dynamics of mechanical systems, including a possible change in the systems stability picture. Factors such as nozzle geometry, combustion chamber geometry, propellant's initial shape, size and relative mass, and propellant location can all have important influences on the system's dynamic behavior. The relative importance of these parameters on-system motion are quantified in a way that is useful for design purposes.

  20. Gynecomastia Classification for Surgical Management: A Systematic Review and Novel Classification System.

    Waltho, Daniel; Hatchell, Alexandra; Thoma, Achilleas

    2017-03-01

    Gynecomastia is a common deformity of the male breast, where certain cases warrant surgical management. There are several surgical options, which vary depending on the breast characteristics. To guide surgical management, several classification systems for gynecomastia have been proposed. A systematic review was performed to (1) identify all classification systems for the surgical management of gynecomastia, and (2) determine the adequacy of these classification systems to appropriately categorize the condition for surgical decision-making. The search yielded 1012 articles, and 11 articles were included in the review. Eleven classification systems in total were ascertained, and a total of 10 unique features were identified: (1) breast size, (2) skin redundancy, (3) breast ptosis, (4) tissue predominance, (5) upper abdominal laxity, (6) breast tuberosity, (7) nipple malposition, (8) chest shape, (9) absence of sternal notch, and (10) breast skin elasticity. On average, classification systems included two or three of these features. Breast size and ptosis were the most commonly included features. Based on their review of the current classification systems, the authors believe the ideal classification system should be universal and cater to all causes of gynecomastia; be surgically useful and easy to use; and should include a comprehensive set of clinically appropriate patient-related features, such as breast size, breast ptosis, tissue predominance, and skin redundancy. None of the current classification systems appears to fulfill these criteria.

  1. Functional classifications for cerebral palsy: correlations between the gross motor function classification system (GMFCS), the manual ability classification system (MACS) and the communication function classification system (CFCS).

    Compagnone, Eliana; Maniglio, Jlenia; Camposeo, Serena; Vespino, Teresa; Losito, Luciana; De Rinaldis, Marta; Gennaro, Leonarda; Trabacca, Antonio

    2014-11-01

    This study aimed to investigate a possible correlation between the gross motor function classification system-expanded and revised (GMFCS-E&R), the manual abilities classification system (MACS) and the communication function classification system (CFCS) functional levels in children with cerebral palsy (CP) by CP subtype. It was also geared to verify whether there is a correlation between these classification systems and intellectual functioning (IF) and parental socio-economic status (SES). A total of 87 children (47 males and 40 females, age range 4-18 years, mean age 8.9±4.2) were included in the study. A strong correlation was found between the three classifications: Level V of the GMFCS-E&R corresponds to Level V of the MACS (rs=0.67, p=0.001); the same relationship was found for the CFCS and the MACS (rs=0.73, p<0.001) and for the GMFCS-E&R and the CFCS (rs=0.61, p=0.001). The correlations between the IQ and the global functional disability profile were strong or moderate (GMFCS and IQ: rs=0.66, p=0.001; MACS and IQ: rs=0.58, p=0.001; CFCS and MACS: rs=0.65, p=0.001). The Kruskal-Wallis test was used to determine if there were differences between the GMFCS-E&R, the CFCS and the MACS by CP type. CP types showed different scores for the IQ level (Chi-square=8.59, df=2, p=0.014), the GMFCS-E&R (Chi-square=36.46, df=2, p<0.001), the CFCS (Chi-square=12.87, df=2, p=0.002), and the MACS Level (Chi-square=13.96, df=2, p<0.001) but no significant differences emerged for the SES (Chi-square=1.19, df=2, p=0.554). This study shows how the three functional classifications (GMFCS-E&R, CFCS and MACS) complement each other to provide a better description of the functional profile of CP. The systematic evaluation of the IQ can provide useful information about a possible future outcome for every functional level. The SES does not appear to affect functional profiles. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. System diagnostics using qualitative analysis and component functional classification

    Reifman, J.; Wei, T.Y.C.

    1993-01-01

    A method for detecting and identifying faulty component candidates during off-normal operations of nuclear power plants involves the qualitative analysis of macroscopic imbalances in the conservation equations of mass, energy and momentum in thermal-hydraulic control volumes associated with one or more plant components and the functional classification of components. The qualitative analysis of mass and energy is performed through the associated equations of state, while imbalances in momentum are obtained by tracking mass flow rates which are incorporated into a first knowledge base. The plant components are functionally classified, according to their type, as sources or sinks of mass, energy and momentum, depending upon which of the three balance equations is most strongly affected by a faulty component which is incorporated into a second knowledge base. Information describing the connections among the components of the system forms a third knowledge base. The method is particularly adapted for use in a diagnostic expert system to detect and identify faulty component candidates in the presence of component failures and is not limited to use in a nuclear power plant, but may be used with virtually any type of thermal-hydraulic operating system. 5 figures

  3. Classification system for oral submucous fibrosis

    Chandramani Bhagvan More

    2012-01-01

    Full Text Available Oral submucous fibrosis (OSMF is a potentially malignant disorder (PMD and crippling condition of oral mucosa. It is a chronic insidious scarring disease of oral cavity, pharynx and upper digestive tract, characterized by progressive inability to open the mouth due to loss of elasticity and development of vertical fibrous bands in labial and buccal tissues. OSMF is a debilitating but preventable oral disease. It predominantly affects people of Southeast Asia and Indian subcontinent, where chewing of arecanut and its commercial preparation is high. Presence of fibrous bands is the main characteristic feature of OSMF. The present literature review provides the compilation of various classification system based on clinical and/or histopathological features of OSMF from several databases. The advantages and drawbacks of these classifications supersede each other, leading to perplexity. An attempt is made to provide and update the knowledge about this potentially malignant disorder to health care providers in order to help in early detection and treatment, thus reducing the mortality of oral cancer.

  4. A High Throughput Ambient Mass Spectrometric Approach to Species Identification and Classification from Chemical Fingerprint Signatures

    Musah, Rabi A.; Espinoza, Edgard O.; Cody, Robert B.; Lesiak, Ashton D.; Christensen, Earl D.; Moore, Hannah E.; Maleknia, Simin; Drijfhout, Falko P.

    2015-01-01

    A high throughput method for species identification and classification through chemometric processing of direct analysis in real time (DART) mass spectrometry-derived fingerprint signatures has been developed. The method entails introduction of samples to the open air space between the DART ion source and the mass spectrometer inlet, with the entire observed mass spectral fingerprint subjected to unsupervised hierarchical clustering processing. A range of both polar and non-polar chemotypes a...

  5. Mass Spectrometry Imaging for the Classification of Tumor Tissue

    Mascini, N.E.

    2016-01-01

    Mass spectrometry imaging (MSI) can detect and identify many different molecules without the need for labeling. In addition, it can provide their spatial distributions as ‘molecular maps’. These features make MSI well suited for studying the molecular makeup of tumor tissue. Currently, there is an

  6. Classification of terverticillate Penicillia by electrospray mass spectrometric profiling

    Smedsgaard, Jørn; Hansen, Michael Edberg; Frisvad, Jens Christian

    2004-01-01

    429 isolates of 58 species belonging to Penicillium subgenus Penicillium are classified from direct infusion electrospray mass spectrometry (diMS) analysis of crude extracts by automated data processing. The study shows that about 70% of the species can be classified correctly into species using...

  7. A new tree classification system for southern hardwoods

    James S. Meadows; Daniel A. Jr. Skojac

    2008-01-01

    A new tree classification system for southern hardwoods is described. The new system is based on the Putnam tree classification system, originally developed by Putnam et al., 1960, Management ond inventory of southern hardwoods, Agriculture Handbook 181, US For. Sew., Washington, DC, which consists of four tree classes: (1) preferred growing stock, (2) reserve growing...

  8. A proposed data base system for detection, classification and ...

    A proposed data base system for detection, classification and location of fault on electricity company of Ghana electrical distribution system. Isaac Owusu-Nyarko, Mensah-Ananoo Eugine. Abstract. No Abstract. Keywords: database, classification of fault, power, distribution system, SCADA, ECG. Full Text: EMAIL FULL TEXT ...

  9. The new classification of elementary particle resonance mass spectra

    Gareev, F.A.; Barabanov, M.Yu.; Kazacha, G.S.

    1997-01-01

    Elementary particle resonances have been systematically analyzed from the first principles: the conservation laws of energy-momentum and Ehrenfest adiabatic invariant. As a result, resonance decay product momenta and masses of resonances were established to be quantized. Radial excited states of resonances were revealed. These observations give us a possibility to formulate the strategy of experimental searches for new resonances and to systematize already known ones. (author)

  10. Determination of a radioactive waste classification system

    Cohen, J.J.; King, W.C.

    1978-03-01

    Several classification systems for radioactive wastes are reviewed and a system is developed that provides guidance on disposition of the waste. The system has three classes: high-level waste (HLW), which requires complete isolation from the biosphere for extended time periods; low-level waste (LLW), which requires containment for shorter periods; and innocuous waste (essentially nonradioactive), which may be disposed of by conventional means. The LLW/innocuous waste interface was not defined in this study. Reasonably conservative analytical scenarios were used to calculate that HLW/LLW interface level which would ensure compliance with the radiological exposure guidelines of 0.5 rem/y maximum exposure for a few isolated individuals and 0.005 rem/y for large population groups. The recommended HLW/LLW interface level for /sup 239/Pu or mixed transuranic waste is 1.0 ..mu..Ci/cm/sup 3/ of waste. Levels for other radionuclides are based upon a risk equivalent to this level. A cost-benefit analysis in accordance with as low as reasonably achievable (ALARA) and National Environmental Protection Act (NEPA) guidance indicates that further reduction of this HLW/LLL interface level would entail marginal costs greater than $10/sup 8/ per man-rem of dose avoided. The environmental effects considered were limited to those involving human exposure to radioactivity.

  11. Determination of a radioactive waste classification system

    Cohen, J.J.; King, W.C.

    1978-03-01

    Several classification systems for radioactive wastes are reviewed and a system is developed that provides guidance on disposition of the waste. The system has three classes: high-level waste (HLW), which requires complete isolation from the biosphere for extended time periods; low-level waste (LLW), which requires containment for shorter periods; and innocuous waste (essentially nonradioactive), which may be disposed of by conventional means. The LLW/innocuous waste interface was not defined in this study. Reasonably conservative analytical scenarios were used to calculate that HLW/LLW interface level which would ensure compliance with the radiological exposure guidelines of 0.5 rem/y maximum exposure for a few isolated individuals and 0.005 rem/y for large population groups. The recommended HLW/LLW interface level for 239 Pu or mixed transuranic waste is 1.0 μCi/cm 3 of waste. Levels for other radionuclides are based upon a risk equivalent to this level. A cost-benefit analysis in accordance with as low as reasonably achievable (ALARA) and National Environmental Protection Act (NEPA) guidance indicates that further reduction of this HLW/LLL interface level would entail marginal costs greater than $10 8 per man-rem of dose avoided. The environmental effects considered were limited to those involving human exposure to radioactivity

  12. The classification of osteonecrosis in patients with cancer: validation of a new radiological classification system

    Niinimäki, T.; Niinimäki, J.; Halonen, J.; Hänninen, P.; Harila-Saari, A.; Niinimäki, R.

    2015-01-01

    Aim: To validate a new, non-joint-specific radiological classification system that is suitable regardless of the site of the osteonecrosis (ON) in patients with cancer. Material and methods: Critical deficiencies in the existing ON classification systems were identified and a new, non-joint-specific radiological classification system was developed. Seventy-two magnetic resonance imaging (MRI) images of patients with cancer and ON lesions were graded, and the validation of the new system was performed by assessing inter- and intra-observer reliability. Results: Intra-observer reliability of ON grading was good or very good, with kappa values of 0.79–0.86. Interobserver agreement was lower but still good, with kappa values of 0.62–0.77. Ninety-eight percent of all intra- or interobserver differences were within one grade. Interobserver reliability of assessing the location of ON was very good, with kappa values of 0.93–0.98. Conclusion: All the available radiological ON classification systems are joint specific. This limitation has spurred the development of multiple systems, which has led to the insufficient use of classifications in ON studies among patients with cancer. The introduced radiological classification system overcomes the problem of joint-specificity, was found to be reliable, and can be used to classify all ON lesions regardless of the affected site. - Highlights: • Patients with cancer may have osteonecrosis lesions at multiple sites. • There is no non-joint-specific osteonecrosis classification available. • We introduced a new non-joint-specific osteonecrosis classification. • The validation was performed by assessing inter- and intra-observer reliability. • The classification was reliable and could be used regardless of the affected site.

  13. Review of international classification systems for uranium resources

    Wang Wenyou

    2007-01-01

    The two primary classification systems for uranium resources in common use in the whole world are described. These uranium resource classification systems were developed under two distinct philosophies, it implies two very different processes, criteria, terms and definitions from which the systems evolved and were implemented. However, the two primary systems are all based on two considerations: the degree of geological confidence and the degree of economic attractiveness based on cost of producing the resource. The uranium resource classification methods currently used in most major uranium producing countries have all a bearing on the two aforesaid classification systems. The disparity exists only in the way or practice of classifying and estimating the uranium resources for reasons of different political and economical systems in various countries. The harmonization of these resource classification systems for uranium can be realized with the economic integration on a global scale. (authors)

  14. Risk-based classification system of nanomaterials

    Tervonen, Tommi; Linkov, Igor; Figueira, Jose Rui; Steevens, Jeffery; Chappell, Mark; Merad, Myriam

    2009-01-01

    Various stakeholders are increasingly interested in the potential toxicity and other risks associated with nanomaterials throughout the different stages of a product's life cycle (e.g., development, production, use, disposal). Risk assessment methods and tools developed and applied to chemical and biological materials may not be readily adaptable for nanomaterials because of the current uncertainty in identifying the relevant physico-chemical and biological properties that adequately describe the materials. Such uncertainty is further driven by the substantial variations in the properties of the original material due to variable manufacturing processes employed in nanomaterial production. To guide scientists and engineers in nanomaterial research and application as well as to promote the safe handling and use of these materials, we propose a decision support system for classifying nanomaterials into different risk categories. The classification system is based on a set of performance metrics that measure both the toxicity and physico-chemical characteristics of the original materials, as well as the expected environmental impacts through the product life cycle. Stochastic multicriteria acceptability analysis (SMAA-TRI), a formal decision analysis method, was used as the foundation for this task. This method allowed us to cluster various nanomaterials in different ecological risk categories based on our current knowledge of nanomaterial physico-chemical characteristics, variation in produced material, and best professional judgments. SMAA-TRI uses Monte Carlo simulations to explore all feasible values for weights, criteria measurements, and other model parameters to assess the robustness of nanomaterial grouping for risk management purposes.

  15. Risk-based classification system of nanomaterials

    Tervonen, Tommi, E-mail: t.p.tervonen@rug.n [University of Groningen, Faculty of Economics and Business (Netherlands); Linkov, Igor, E-mail: igor.linkov@usace.army.mi [US Army Research and Development Center (United States); Figueira, Jose Rui, E-mail: figueira@ist.utl.p [Technical University of Lisbon, CEG-IST, Centre for Management Studies, Instituto Superior Tecnico (Portugal); Steevens, Jeffery, E-mail: jeffery.a.steevens@usace.army.mil; Chappell, Mark, E-mail: mark.a.chappell@usace.army.mi [US Army Research and Development Center (United States); Merad, Myriam, E-mail: myriam.merad@ineris.f [INERIS BP 2, Societal Management of Risks Unit/Accidental Risks Division (France)

    2009-05-15

    Various stakeholders are increasingly interested in the potential toxicity and other risks associated with nanomaterials throughout the different stages of a product's life cycle (e.g., development, production, use, disposal). Risk assessment methods and tools developed and applied to chemical and biological materials may not be readily adaptable for nanomaterials because of the current uncertainty in identifying the relevant physico-chemical and biological properties that adequately describe the materials. Such uncertainty is further driven by the substantial variations in the properties of the original material due to variable manufacturing processes employed in nanomaterial production. To guide scientists and engineers in nanomaterial research and application as well as to promote the safe handling and use of these materials, we propose a decision support system for classifying nanomaterials into different risk categories. The classification system is based on a set of performance metrics that measure both the toxicity and physico-chemical characteristics of the original materials, as well as the expected environmental impacts through the product life cycle. Stochastic multicriteria acceptability analysis (SMAA-TRI), a formal decision analysis method, was used as the foundation for this task. This method allowed us to cluster various nanomaterials in different ecological risk categories based on our current knowledge of nanomaterial physico-chemical characteristics, variation in produced material, and best professional judgments. SMAA-TRI uses Monte Carlo simulations to explore all feasible values for weights, criteria measurements, and other model parameters to assess the robustness of nanomaterial grouping for risk management purposes.

  16. Classification of breast masses in ultrasonic B scans using Nakagami and K distributions

    Shankar, P M; Dumane, Vishruta A; George, Thomas; Piccoli, Catherine W; Reid, John M; Forsberg, Flemming; Goldberg, Barry B

    2003-01-01

    Classification of breast masses in greyscale ultrasound images is undertaken using a multiparameter approach. Five parameters reflecting the non-Rayleigh nature of the backscattered echo were used. These parameters, based mostly on the Nakagami and K distributions, were extracted from the envelope of the echoes at the site, boundary, spiculated region and shadow of the mass. They were combined to create a linear discriminant. The performance of this discriminant for the classification of breast masses was studied using a data set consisting of 70 benign and 29 malignant cases. The A z value for the discriminant was 0.96 ± 0.02, showing great promise in the classification of masses into benign and malignant ones. The discriminant was combined with the level of suspicion values of the radiologist leading to an A z value of 0.97 ± 0.014. The parameters used here can be calculated with minimal clinical intervention, so the method proposed here may therefore be easily implemented in an automated fashion. These results also support the recent reports suggesting that ultrasound may help as an adjunct to mammography in breast cancer diagnostics to enhance the classification of breast masses

  17. Classification of parotidectomy: a proposed modification to the European Salivary Gland Society classification system.

    Wong, Wai Keat; Shetty, Subhaschandra

    2017-08-01

    Parotidectomy remains the mainstay of treatment for both benign and malignant lesions of the parotid gland. There exists a wide range of possible surgical options in parotidectomy in terms of extent of parotid tissue removed. There is increasing need for uniformity of terminology resulting from growing interest in modifications of the conventional parotidectomy. It is, therefore, of paramount importance for a standardized classification system in describing extent of parotidectomy. Recently, the European Salivary Gland Society (ESGS) proposed a novel classification system for parotidectomy. The aim of this study is to evaluate this system. A classification system proposed by the ESGS was critically re-evaluated and modified to increase its accuracy and its acceptability. Modifications mainly focused on subdividing Levels I and II into IA, IB, IIA, and IIB. From June 2006 to June 2016, 126 patients underwent 130 parotidectomies at our hospital. The classification system was tested in that cohort of patient. While the ESGS classification system is comprehensive, it does not cover all possibilities. The addition of Sublevels IA, IB, IIA, and IIB may help to address some of the clinical situations seen and is clinically relevant. We aim to test the modified classification system for partial parotidectomy to address some of the challenges mentioned.

  18. 42 CFR 412.513 - Patient classification system.

    2010-10-01

    ... LTC-DRG classification system provides a LTC-DRG, and an appropriate weighting factor, for those cases... intermediary decides that a different LTC-DRG should be assigned, the case will be reviewed by the appropriate... 42 Public Health 2 2010-10-01 2010-10-01 false Patient classification system. 412.513 Section 412...

  19. Classification process in a text document recommender system

    Dan MUNTEANU

    2005-12-01

    Full Text Available This paper presents the classification process in a recommender system used for textual documents taken especially from web. The system uses in the classification process a combination of content filters, event filters and collaborative filters and it uses implicit and explicit feedback for evaluating documents.

  20. A novel classification system for aging theories

    Lucas Siqueira Trindade

    2013-03-01

    Full Text Available Theories of lifespan evolution are a source of confusion amongst aging researchers. After a century of aging research the dispute over whether the aging process is active or passive persists and a comprehensive and universally accepted theoretical model remains elusive. Evolutionary aging theories primarily dispute whether the aging process is exclusively adapted to favor the kin or exclusively non-adapted to favor the individual. Interestingly, contradictory data and theories supporting both exclusively programmed and exclusively non-programmed theories continue to grow. However, this is a false dichotomy; natural selection favors traits resulting in efficient reproduction whether they benefit the individual or the kin. Thus, to understand the evolution of aging, first we must understand the environment-dependent balance between the advantages and disadvantages of extended lifespan in the process of spreading genes. As described by distinct theories, different niches and environmental conditions confer on extended lifespan a range of fitness values varying from highly beneficial to highly detrimental. Here, we considered the range of fitness values for extended lifespan and develop a fitness-based framework for categorizing existing theories. We show that all theories can be classified into four basic types: secondary (beneficial, maladaptive (neutral, assisted death (detrimental and senemorphic aging (varying between beneficial to detrimental. We anticipate that this classification system will assist with understanding and interpreting aging/death by providing a way of considering theories as members of one of these classes rather than consideration of their individual details.

  1. Safety classification of nuclear power plant systems, structures and components

    1992-01-01

    The Safety Classification principles used for the systems, structures and components of a nuclear power plant are detailed in the guide. For classification, the nuclear power plant is divided into structural and operational units called systems. Every structure and component under control is included into some system. The Safety Classes are 1, 2 and 3 and the Class EYT (non-nuclear). Instructions how to assign each system, structure and component to an appropriate safety class are given in the guide. The guide applies to new nuclear power plants and to the safety classification of systems, structures and components designed for the refitting of old nuclear power plants. The classification principles and procedures applying to the classification document are also given

  2. Host Rock Classification (HRC) system for nuclear waste disposal in crystalline bedrock

    Hagros, A.

    2006-01-01

    A new rock mass classification scheme, the Host Rock Classification system (HRC-system) has been developed for evaluating the suitability of volumes of rock mass for the disposal of high-level nuclear waste in Precambrian crystalline bedrock. To support the development of the system, the requirements of host rock to be used for disposal have been studied in detail and the significance of the various rock mass properties have been examined. The HRC-system considers both the long-term safety of the repository and the constructability in the rock mass. The system is specific to the KBS-3V disposal concept and can be used only at sites that have been evaluated to be suitable at the site scale. By using the HRC-system, it is possible to identify potentially suitable volumes within the site at several different scales (repository, tunnel and canister scales). The selection of the classification parameters to be included in the HRC-system is based on an extensive study on the rock mass properties and their various influences on the long-term safety, the constructability and the layout and location of the repository. The parameters proposed for the classification at the repository scale include fracture zones, strength/stress ratio, hydraulic conductivity and the Groundwater Chemistry Index. The parameters proposed for the classification at the tunnel scale include hydraulic conductivity, Q' and fracture zones and the parameters proposed for the classification at the canister scale include hydraulic conductivity, Q', fracture zones, fracture width (aperture + filling) and fracture trace length. The parameter values will be used to determine the suitability classes for the volumes of rock to be classified. The HRC-system includes four suitability classes at the repository and tunnel scales and three suitability classes at the canister scale and the classification process is linked to several important decisions regarding the location and acceptability of many components of

  3. Systems of neutrinos with mass

    Groot, S.R. de

    1984-01-01

    From the formalism of relativistic kinetic theory and the weak interaction Lagrangian the volume viscosity of a massive neutrino system is derived. Its value is calculated as a function of the neutrino mass and the temperature. Its role in the way of expanding or contraction of neutrino clouds in the universe is discussed. (Author) [pt

  4. Evaluating heat-related mortality in Korea by objective classifications of 'air masses'

    Kyselý, Jan; Huth, Radan; Kim, J.

    2010-01-01

    Roč. 30, č. 10 (2010), s. 1484-1501 ISSN 0899-8418 R&D Projects: GA ČR GC205/07/J044 Institutional research plan: CEZ:AV0Z30420517 Keywords : weather type classifications * air masses * biometeorology * human mortality * South Korea Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 2.479, year: 2010

  5. New C2 synchondrosal fracture classification system

    Rusin, Jerome A.; Ruess, Lynne [Department of Radiology, Nationwide Children' s Hospital, Columbus, OH (United States); The Ohio State University College of Medicine and Public Health, Columbus, OH (United States); Daulton, Robert S. [Department of Radiology, Nationwide Children' s Hospital, Columbus, OH (United States)

    2015-06-15

    Excessive cervical flexion-extension accompanying mild to severe impact injuries can lead to C2 synchondrosal fractures in young children. To characterize and classify C2 synchondrosal fracture patterns. We retrospectively reviewed imaging and medical records of children who were treated for cervical spine fractures at our institution between 1995 and 2014. We reviewed all fractures involving the five central C2 synchondroses with regard to patient demographics, mechanism of injury, fracture pattern, associated fractures and other injuries, treatment plans and outcome. Fourteen children had fractures involving the central C2 synchondroses. There were nine boys and five girls, all younger than 6 years. We found four distinct fracture patterns. Eleven complete fractures were further divided into four subtypes (a, b, c and d) based on degree of anterior displacement of the odontoid segment and presence of distraction. Nine of these 11 children had fractures through both odontoneural synchondroses and the odontocentral synchondrosis; one had fractures involving both neurocentral synchondroses and the odontoneural synchondrosis; one had fractures through bilateral odontoneural and bilateral neurocentral synchondroses. Three children had incomplete fractures, defined as a fracture through a single odontoneural synchondrosis with or without partial extension into either the odontocentral or the adjacent neurocentral synchondroses. All complete fractures were displaced or angulated. Four had associated spinal cord injury, including two contusions (subtype c fractures) and two fatal transections (subtype d fractures). Most children were treated with primary halo stabilization. Subtype c fractures required surgical fixation. We describe four patterns of central C2 synchondrosal fractures, including two unique patterns that have not been reported. We propose a classification system to distinguish these fractures and aid in treatment planning. (orig.)

  6. Update of the LIPID MAPS comprehensive classification system for lipids

    Fahy, E.; Subramaniam, S.; Murphy, R.C.; Nishijima, M.; Raetz, C.R.H.; Shimizu, T.; Spener, F.; van Meer, G.|info:eu-repo/dai/nl/068570368; Wakelam, M.J.O.; Dennis, E.A.

    2009-01-01

    In 2005, the International Lipid Classification and Nomenclature Committee under the sponsorship of the LIPID MAPS Consortium developed and established a “Comprehensive Classification System for Lipids” based on well-defined chemical and biochemical principles and using an ontology that is

  7. Calibration of a Plastic Classification System with the Ccw Model

    Barcala Riveira, J. M.; Fernandez Marron, J. L.; Alberdi Primicia, J.; Navarrete Marin, J. J.; Oller Gonzalez, J. C.

    2003-01-01

    This document describes the calibration of a plastic Classification system with the Ccw model (Classification by Quantum's built with Wavelet Coefficients). The method is applied to spectra of plastics usually present in domestic wastes. Obtained results are showed. (Author) 16 refs

  8. Use of prior mammograms in the classification of benign and malignant masses

    Varela, Celia; Karssemeijer, Nico; Hendriks, Jan H.C.L.; Holland, Roland

    2005-01-01

    The purpose of this study was to determine the importance of using prior mammograms for classification of benign and malignant masses. Five radiologists and one resident classified mass lesions in 198 mammograms obtained from a population-based screening program. Cases were interpreted twice, once without and once with comparison of previous mammograms, in a sequential reading order using soft copy image display. The radiologists' performances in classifying benign and malignant masses without and with previous mammograms were evaluated with receiver operating characteristic (ROC) analysis. The statistical significance of the difference in performances was calculated using analysis of variance. The use of prior mammograms improved the classification performance of all participants in the study. The mean area under the ROC curve of the readers increased from 0.763 to 0.796. This difference in performance was statistically significant (P = 0.008)

  9. False-positive reduction in CAD mass detection using a competitive classification strategy

    Li Lihua; Zheng Yang; Zhang Lei; Clark, Robert A.

    2001-01-01

    High false-positive (FP) rate remains to be one of the major problems to be solved in CAD study because too many false-positively cued signals will potentially degrade the performance of detecting true-positive regions and increase the call-back rate in CAD environment. In this paper, we proposed a novel classification method for FP reduction, where the conventional 'hard' decision classifier is cascaded with a 'soft' decision classification with the objective to reduce false-positives in the cases with multiple FPs retained after the 'hard' decision classification. The 'soft' classification takes a competitive classification strategy in which only the 'best' ones are selected from the pre-classified suspicious regions as the true mass in each case. A neural network structure is designed to implement the proposed competitive classification. Comparative studies of FP reduction on a database of 79 images by a 'hard' decision classification and a combined 'hard'-'soft' classification method demonstrated the efficiency of the proposed classification strategy. For example, for the high FP sub-database which has only 31.7% of total images but accounts for 63.5% of whole FPs generated in single 'hard' classification, the FPs can be reduced for 56% (from 8.36 to 3.72 per image) by using the proposed method at the cost of 1% TP loss (from 69% to 68%) in whole database, while it can only be reduced for 27% (from 8.36 to 6.08 per image) by simply increasing the threshold of 'hard' classifier with a cost of TP loss as high as 14% (from 69% to 55%). On the average in whole database, the FP reduction by hybrid 'hard'-'soft' classification is 1.58 per image as compared to 1.11 by 'hard' classification at the TP costs described above. Because the cases with high dense tissue are of higher risk of cancer incidence and false-negative detection in mammogram screening, and usually generate more FPs in CAD detection, the method proposed in this paper will be very helpful in improving

  10. The theory and practice of the Dewey Decimal Classification system

    Satija, M P

    2013-01-01

    The Dewey Decimal Classification system (DDC) is the world's most popular library classification system. The 23rd edition of the DDC was published in 2011. This second edition of The Theory and Practice of the Dewey Decimal Classification System examines the history, management and technical aspects of the DDC up to its latest edition. The book places emphasis on explaining the structure and number building techniques in the DDC and reviews all aspects of subject analysis and number building by the most recent version of the DDC. A history of, and introduction to, the DDC is followed by subjec

  11. Development of a classification system for cup anemometers - CLASSCUP

    Friis Pedersen, Troels

    2003-01-01

    the objectives to quantify the errors associated with the use of cup anemometers, and to determine the requirements for an optimum design of a cup anemometer, and to develop a classification system forquantification of systematic errors of cup anemometers. The present report describes this proposed...... classification system. A classification method for cup anemometers has been developed, which proposes general external operational ranges to be used. Anormal category range connected to ideal sites of the IEC power performance standard was made, and another extended category range for complex terrain...... was proposed. General classification indices were proposed for all types of cup anemometers. As a resultof the classification, the cup anemometer will be assigned to a certain class: 0.5, 1, 2, 3 or 5 with corresponding intrinsic errors (%) as a vector instrument (3D) or as a horizontal instrument (2D...

  12. Cirse Quality Assurance Document and Standards for Classification of Complications: The Cirse Classification System.

    Filippiadis, D K; Binkert, C; Pellerin, O; Hoffmann, R T; Krajina, A; Pereira, P L

    2017-08-01

    Interventional radiology provides a wide variety of vascular, nonvascular, musculoskeletal, and oncologic minimally invasive techniques aimed at therapy or palliation of a broad spectrum of pathologic conditions. Outcome data for these techniques are globally evaluated by hospitals, insurance companies, and government agencies targeting in a high-quality health care policy, including reimbursement strategies. To analyze effectively the outcome of a technique, accurate reporting of complications is necessary. Throughout the literature, numerous classification systems for complications grading and classification have been reported. Until now, there has been no method for uniform reporting of complications both in terms of definition and grading. The purpose of this CIRSE guideline is to provide a classification system of complications based on combining outcome and severity of sequelae. The ultimate challenge will be the adoption of this system by practitioners in different countries and health economies within the European Union and beyond.

  13. Classification

    Hjørland, Birger

    2017-01-01

    This article presents and discusses definitions of the term “classification” and the related concepts “Concept/conceptualization,”“categorization,” “ordering,” “taxonomy” and “typology.” It further presents and discusses theories of classification including the influences of Aristotle...... and Wittgenstein. It presents different views on forming classes, including logical division, numerical taxonomy, historical classification, hermeneutical and pragmatic/critical views. Finally, issues related to artificial versus natural classification and taxonomic monism versus taxonomic pluralism are briefly...

  14. Formalization of the classification pattern: survey of classification modeling in information systems engineering.

    Partridge, Chris; de Cesare, Sergio; Mitchell, Andrew; Odell, James

    2018-01-01

    Formalization is becoming more common in all stages of the development of information systems, as a better understanding of its benefits emerges. Classification systems are ubiquitous, no more so than in domain modeling. The classification pattern that underlies these systems provides a good case study of the move toward formalization in part because it illustrates some of the barriers to formalization, including the formal complexity of the pattern and the ontological issues surrounding the "one and the many." Powersets are a way of characterizing the (complex) formal structure of the classification pattern, and their formalization has been extensively studied in mathematics since Cantor's work in the late nineteenth century. One can use this formalization to develop a useful benchmark. There are various communities within information systems engineering (ISE) that are gradually working toward a formalization of the classification pattern. However, for most of these communities, this work is incomplete, in that they have not yet arrived at a solution with the expressiveness of the powerset benchmark. This contrasts with the early smooth adoption of powerset by other information systems communities to, for example, formalize relations. One way of understanding the varying rates of adoption is recognizing that the different communities have different historical baggage. Many conceptual modeling communities emerged from work done on database design, and this creates hurdles to the adoption of the high level of expressiveness of powersets. Another relevant factor is that these communities also often feel, particularly in the case of domain modeling, a responsibility to explain the semantics of whatever formal structures they adopt. This paper aims to make sense of the formalization of the classification pattern in ISE and surveys its history through the literature, starting from the relevant theoretical works of the mathematical literature and gradually shifting focus

  15. Should the South African red meat classification system be revised ...

    Soji, Zimkhitha

    2017-07-24

    Jul 24, 2017 ... standards used in the current South African classification system do not ..... South African beef is trimmed of visible fat, it compares favourably in terms of lipid ... structures, insufficient research on goat meat and technological ...

  16. Towards a regional beef carcass classification system for Southern ...

    Mapiye, C, Dr

    2017-05-15

    May 15, 2017 ... beef carcass grading and classification systems used in the region ..... between cattle breeds (genetic), pre-slaughter stress and growth- ..... Nguni cattle for example, owing to their adaptability (i.e. drought and heat tolerant,.

  17. A simplified classification system for partially edentulous spaces

    Bhandari Aruna J, Bhandari Akshay J

    2014-04-01

    Full Text Available Background: There is no single universally employed classification system that will specify the exact edentulous situation. Several classification systems exist to group the situation and avoid confusion. Classifications based on edentulous areas, finished restored prostheses, type of direct retainers or fulcrum lines are there. Some are based depending on the placement of the implants. Widely accepted Kennedy Applegate classification does not give any idea about length, span or number of teeth missing. Rule 6 governing the application of Kennedy method states that additional edentulous areas are referred as modification number 1,2 etc. Rule 7 states that extent of the modification is not considered; only the number of edentulous areas is considered. Hence there is a need to modify the Kennedy –Applegate System. Aims: This new classification system is an attempt to modify Kennedy –Applegate System so as to give the exact idea about missing teeth, space, span, side and areas of partially edentulous arches. Methods and Material: This system will provide the information regarding Maxillary or Mandibular partially edentulous arches, Left or Right side, length of the edentulous space, number of teeth missing and whether there will be tooth borne or tooth – tissue borne prosthesis. Conclusions: This classification is easy for application, communication and will also help to design the removable cast partial denture in a better logical and systematic way. Also, this system will give the idea of the edentulous status and the number of missing teeth in fixed, hybrid or implant prosthesis.

  18. REAL-TIME INTELLIGENT MULTILAYER ATTACK CLASSIFICATION SYSTEM

    T. Subbhulakshmi

    2014-01-01

    Full Text Available Intrusion Detection Systems (IDS takes the lion’s share of the current security infrastructure. Detection of intrusions is vital for initiating the defensive procedures. Intrusion detection was done by statistical and distance based methods. A threshold value is used in these methods to indicate the level of normalcy. When the network traffic crosses the level of normalcy then above which it is flagged as anomalous. When there are occurrences of new intrusion events which are increasingly a key part of system security, the statistical techniques cannot detect them. To overcome this issue, learning techniques are used which helps in identifying new intrusion activities in a computer system. The objective of the proposed system designed in this paper is to classify the intrusions using an Intelligent Multi Layered Attack Classification System (IMLACS which helps in detecting and classifying the intrusions with improved classification accuracy. The intelligent multi layered approach contains three intelligent layers. The first layer involves Binary Support Vector Machine classification for detecting the normal and attack. The second layer involves neural network classification to classify the attacks into classes of attacks. The third layer involves fuzzy inference system to classify the attacks into various subclasses. The proposed IMLACS can be able to detect an intrusion behavior of the networks since the system contains a three intelligent layer classification and better set of rules. Feature selection is also used to improve the time of detection. The experimental results show that the IMLACS achieves the Classification Rate of 97.31%.

  19. Qualitative pattern classification of shear wave elastography for breast masses: how it correlates to quantitative measurements.

    Yoon, Jung Hyun; Ko, Kyung Hee; Jung, Hae Kyoung; Lee, Jong Tae

    2013-12-01

    To determine the correlation of qualitative shear wave elastography (SWE) pattern classification to quantitative SWE measurements and whether it is representative of quantitative SWE values with similar performances. From October 2012 to January 2013, 267 breast masses of 236 women (mean age: 45.12 ± 10.54 years, range: 21-88 years) who had undergone ultrasonography (US), SWE, and subsequent biopsy were included. US BI-RADS final assessment and qualitative and quantitative SWE measurements were recorded. Correlation between pattern classification and mean elasticity, maximum elasticity, elasticity ratio and standard deviation were evaluated. Diagnostic performances of grayscale US, SWE parameters, and US combined to SWE values were calculated and compared. Of the 267 breast masses, 208 (77.9%) were benign and 59 (22.1%) were malignant. Pattern classifications significantly correlated with all quantitative SWE measurements, showing highest correlation with maximum elasticity, r = 0.721 (P0.05). Pattern classification shows high correlation to maximum stiffness and may be representative of quantitative SWE values. When combined to grayscale US, SWE improves specificity of US. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  20. Qualitative pattern classification of shear wave elastography for breast masses: How it correlates to quantitative measurements

    Yoon, Jung Hyun; Ko, Kyung Hee; Jung, Hae Kyoung; Lee, Jong Tae

    2013-01-01

    Objective: To determine the correlation of qualitative shear wave elastography (SWE) pattern classification to quantitative SWE measurements and whether it is representative of quantitative SWE values with similar performances. Methods: From October 2012 to January 2013, 267 breast masses of 236 women (mean age: 45.12 ± 10.54 years, range: 21–88 years) who had undergone ultrasonography (US), SWE, and subsequent biopsy were included. US BI-RADS final assessment and qualitative and quantitative SWE measurements were recorded. Correlation between pattern classification and mean elasticity, maximum elasticity, elasticity ratio and standard deviation were evaluated. Diagnostic performances of grayscale US, SWE parameters, and US combined to SWE values were calculated and compared. Results: Of the 267 breast masses, 208 (77.9%) were benign and 59 (22.1%) were malignant. Pattern classifications significantly correlated with all quantitative SWE measurements, showing highest correlation with maximum elasticity, r = 0.721 (P < 0.001). Sensitivity was significantly decreased in US combined to SWE measurements to grayscale US: 69.5–89.8% to 100.0%, while specificity was significantly improved: 62.5–81.7% to 13.9% (P < 0.001). Area under the ROC curve (A z ) did not show significant differences between grayscale US to US combined to SWE (P > 0.05). Conclusion: Pattern classification shows high correlation to maximum stiffness and may be representative of quantitative SWE values. When combined to grayscale US, SWE improves specificity of US

  1. Qualitative pattern classification of shear wave elastography for breast masses: How it correlates to quantitative measurements

    Yoon, Jung Hyun, E-mail: lvjenny0417@gmail.com [Department of Radiology, CHA Bundang Medical Center, CHA University, School of Medicine (Korea, Republic of); Department of Radiology, Research Institute of Radiological Science, Yonsei University, College of Medicine (Korea, Republic of); Ko, Kyung Hee, E-mail: yourheeya@cha.ac.kr [Department of Radiology, CHA Bundang Medical Center, CHA University, School of Medicine (Korea, Republic of); Jung, Hae Kyoung, E-mail: AA40501@cha.ac.kr [Department of Radiology, CHA Bundang Medical Center, CHA University, School of Medicine (Korea, Republic of); Lee, Jong Tae, E-mail: jtlee@cha.ac.kr [Department of Radiology, CHA Bundang Medical Center, CHA University, School of Medicine (Korea, Republic of)

    2013-12-01

    Objective: To determine the correlation of qualitative shear wave elastography (SWE) pattern classification to quantitative SWE measurements and whether it is representative of quantitative SWE values with similar performances. Methods: From October 2012 to January 2013, 267 breast masses of 236 women (mean age: 45.12 ± 10.54 years, range: 21–88 years) who had undergone ultrasonography (US), SWE, and subsequent biopsy were included. US BI-RADS final assessment and qualitative and quantitative SWE measurements were recorded. Correlation between pattern classification and mean elasticity, maximum elasticity, elasticity ratio and standard deviation were evaluated. Diagnostic performances of grayscale US, SWE parameters, and US combined to SWE values were calculated and compared. Results: Of the 267 breast masses, 208 (77.9%) were benign and 59 (22.1%) were malignant. Pattern classifications significantly correlated with all quantitative SWE measurements, showing highest correlation with maximum elasticity, r = 0.721 (P < 0.001). Sensitivity was significantly decreased in US combined to SWE measurements to grayscale US: 69.5–89.8% to 100.0%, while specificity was significantly improved: 62.5–81.7% to 13.9% (P < 0.001). Area under the ROC curve (A{sub z}) did not show significant differences between grayscale US to US combined to SWE (P > 0.05). Conclusion: Pattern classification shows high correlation to maximum stiffness and may be representative of quantitative SWE values. When combined to grayscale US, SWE improves specificity of US.

  2. Validation of a new classification system for interprosthetic femoral fractures.

    Pires, Robinson Esteves Santos; Silveira, Marcelo Peixoto Sena; Resende, Alessandra Regina da Silva; Junior, Egidio Oliveira Santana; Campos, Tulio Vinicius Oliveira; Santos, Leandro Emilio Nascimento; Balbachevsky, Daniel; Andrade, Marco Antônio Percope de

    2017-07-01

    Interprosthetic femoral fracture (IFF) incidence is gradually increasing as the population is progressively ageing. However, treatment remains challenging due to several contributing factors, such as poor bone quality, patient comorbidities, small interprosthetic fragment, and prostheses instability. An effective and specific classification system is essential to optimize treatment management, therefore diminishing complication rates. This study aims to validate a previously described classification system for interprosthetic femoral fractures. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Language of Czech Medical Reports and Classification Systems in Medicine

    Přečková, Petra

    2010-01-01

    Roč. 6, č. 1 (2010), s. 58-65 ISSN 1801-5603 R&D Projects: GA MŠk(CZ) 1M06014 Institutional research plan: CEZ:AV0Z10300504 Keywords : terminology, * synonyms * classification systems * thesaurus * nomenclature * electronic health record * interoperability * semantic interoperability * cardiology * atherosclerosis Subject RIV: IN - Informatics, Computer Science http://www.ejbi.org/en/ejbi/article/53-en-language-of-czech-medical-reports- and -classification-systems-in-medicine.html

  4. Relationships between summer air masses and mortality in Seoul: Comparison of weather-type classifications

    Kyselý, Jan; Huth, Radan

    2010-01-01

    Roč. 35, 9-12 (2010), s. 536-543 ISSN 1474-7065 R&D Projects: GA ČR GC205/07/J044 Grant - others: Korea Research Foundation(KR) KRF-2006-C00005 Institutional research plan: CEZ:AV0Z30420517 Keywords : Classification of weather types * Air masses * Biometeorology * Human mortality * East Asia Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 0.917, year: 2010

  5. Hawaiian hydrogen mass transit system

    Russell, G.W.; Russell, A.

    1990-01-01

    This paper proposes a joint effort between the scientific and business communities; to create, make and have hydrogen fuel become the primary fuel of the future. Hawaii has abundant, unharnessed renewable resources yet imports almost all of its fuel. Initiating hydrogen production and industrial application in conjunction with a prototype pilot project such as this mass transit system would not only accomplish the joining of science and business but give an environmentally safe energy alternative to the state and people of Hawaii and hopefully the world

  6. A Classification Framework for Large-Scale Face Recognition Systems

    Zhou, Ziheng; Deravi, Farzin

    2009-01-01

    This paper presents a generic classification framework for large-scale face recognition systems. Within the framework, a data sampling strategy is proposed to tackle the data imbalance when image pairs are sampled from thousands of face images for preparing a training dataset. A modified kernel Fisher discriminant classifier is proposed to make it computationally feasible to train the kernel-based classification method using tens of thousands of training samples. The framework is tested in an...

  7. Revised Soil Classification System for Coarse-Fine Mixtures

    Park, Junghee; Santamarina, Carlos

    2017-01-01

    Soil classification systems worldwide capture great physical insight and enable geotechnical engineers to anticipate the properties and behavior of soils by grouping them into similar response categories based on their index properties. Yet gravimetric analysis and data trends summarized from published papers reveal critical limitations in soil group boundaries adopted in current systems. In particular, current classification systems fail to capture the dominant role of fines on the mechanical and hydraulic properties of soils. A revised soil classification system (RSCS) for coarse-fine mixtures is proposed herein. Definitions of classification boundaries use low and high void ratios that gravel, sand, and fines may attain. This research adopts emax and emin for gravels and sands, and three distinctive void ratio values for fines: soft eF|10  kPa and stiff eF|1  MPa for mechanical response (at effective stress 10 kPa and 1 MPa, respectively), and viscous λ⋅eF|LL for fluid flow control, where λ=2log(LL−25) and eF|LL is the void ratio at the liquid limit. For classification purposes, these void ratios can be estimated from index properties such as particle shape, the coefficient of uniformity, and the liquid limit. Analytically computed and data-adjusted boundaries are soil-specific, in contrast with the Unified Soil Classification System (USCS). Threshold fractions for mechanical control and for flow control are quite distinct in the proposed system. Therefore, the RSCS uses a two-name nomenclature whereby the first letters identify the component(s) that controls mechanical properties, followed by a letter (shown in parenthesis) that identifies the component that controls fluid flow. Sample charts in this paper and a Microsoft Excel facilitate the implementation of this revised classification system.

  8. Revised Soil Classification System for Coarse-Fine Mixtures

    Park, Junghee

    2017-04-17

    Soil classification systems worldwide capture great physical insight and enable geotechnical engineers to anticipate the properties and behavior of soils by grouping them into similar response categories based on their index properties. Yet gravimetric analysis and data trends summarized from published papers reveal critical limitations in soil group boundaries adopted in current systems. In particular, current classification systems fail to capture the dominant role of fines on the mechanical and hydraulic properties of soils. A revised soil classification system (RSCS) for coarse-fine mixtures is proposed herein. Definitions of classification boundaries use low and high void ratios that gravel, sand, and fines may attain. This research adopts emax and emin for gravels and sands, and three distinctive void ratio values for fines: soft eF|10  kPa and stiff eF|1  MPa for mechanical response (at effective stress 10 kPa and 1 MPa, respectively), and viscous λ⋅eF|LL for fluid flow control, where λ=2log(LL−25) and eF|LL is the void ratio at the liquid limit. For classification purposes, these void ratios can be estimated from index properties such as particle shape, the coefficient of uniformity, and the liquid limit. Analytically computed and data-adjusted boundaries are soil-specific, in contrast with the Unified Soil Classification System (USCS). Threshold fractions for mechanical control and for flow control are quite distinct in the proposed system. Therefore, the RSCS uses a two-name nomenclature whereby the first letters identify the component(s) that controls mechanical properties, followed by a letter (shown in parenthesis) that identifies the component that controls fluid flow. Sample charts in this paper and a Microsoft Excel facilitate the implementation of this revised classification system.

  9. Classification system of the mineral reserves and resources of Ukraine

    Lovinyukov, V.I.

    1998-01-01

    This paper describes the system used to classify the resources and reserves of all minerals and fuels in Ukraine. The classification system is part of an official procedure determined by the Ukrainian State Commission on Reserves. Following preparation of resource estimates the results are registered with the State, which maintains an official inventory of all mineral resources. This paper compares the Ukrainian system to, and finds it compatible with the United Nations International Framework of resource classification. The UN system is based on economics of production and mineability. (author)

  10. Classification system of the mineral reserves and resources of Ukraine

    Lovyunikov, V.I.

    1997-01-01

    This paper describes the system used to classify the resources and reserves of all minerals and fuels in Ukraine. The classification system is part of an official procedures determined by the Ukrainian State Commission on Reserves. Following preparation of resource estimates the results are registered with the State, which maintains an official inventory of all mineral resources. This paper compares the Ukrainian system to, and finds it compatible with the United Nations International Framework of resources classification. The UN system is based on economics of production and mineability. (author). 1 tab

  11. Towards a consensus on a hearing preservation classification system.

    Skarzynski, Henryk; van de Heyning, P; Agrawal, S; Arauz, S L; Atlas, M; Baumgartner, W; Caversaccio, M; de Bodt, M; Gavilan, J; Godey, B; Green, K; Gstoettner, W; Hagen, R; Han, D M; Kameswaran, M; Karltorp, E; Kompis, M; Kuzovkov, V; Lassaletta, L; Levevre, F; Li, Y; Manikoth, M; Martin, J; Mlynski, R; Mueller, J; O'Driscoll, M; Parnes, L; Prentiss, S; Pulibalathingal, S; Raine, C H; Rajan, G; Rajeswaran, R; Rivas, J A; Rivas, A; Skarzynski, P H; Sprinzl, G; Staecker, H; Stephan, K; Usami, S; Yanov, Y; Zernotti, M E; Zimmermann, K; Lorens, A; Mertens, G

    2013-01-01

    The comprehensive Hearing Preservation classification system presented in this paper is suitable for use for all cochlear implant users with measurable pre-operative residual hearing. If adopted as a universal reporting standard, as it was designed to be, it should prove highly beneficial by enabling future studies to quickly and easily compare the results of previous studies and meta-analyze their data. To develop a comprehensive Hearing Preservation classification system suitable for use for all cochlear implant users with measurable pre-operative residual hearing. The HEARRING group discussed and reviewed a number of different propositions of a HP classification systems and reviewed critical appraisals to develop a qualitative system in accordance with the prerequisites. The Hearing Preservation Classification System proposed herein fulfills the following necessary criteria: 1) classification is independent from users' initial hearing, 2) it is appropriate for all cochlear implant users with measurable pre-operative residual hearing, 3) it covers the whole range of pure tone average from 0 to 120 dB; 4) it is easy to use and easy to understand.

  12. CLASSIFICATION OF THE MGR WASTE EMPLACEMENT/RETRIEVAL SYSTEM

    J.A. Ziegler

    2000-01-01

    The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) waste emplacement/retrieved system structures, systems and components (SSCs) performed by the MGR Preclosure Safety and Systems Engineering Section. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMP 2000). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333P, Quality Assurance Requirements and Description (QARD) (DOE 2000). This QA classification incorporates the current MGR design and the results of the ''Design Basis Event Frequency and Dose Calculation for Site Recommendation'' (CRWMS M andO 2000a). The content and technical approach of this analysis is in accordance with the development plan ''QA Classification of MGR Structures, Systems, and Components'' (CRWMS M andO 1999b)

  13. Zero voltage mass spectrometry probes and systems

    Cooks, Robert Graham; Wleklinski, Michael Stanley; Bag, Soumabha; Li, Yafeng

    2017-10-10

    The invention generally relates to zero volt mass spectrometry probes and systems. In certain embodiments, the invention provides a system including a mass spectrometry probe including a porous material, and a mass spectrometer (bench-top or miniature mass spectrometer). The system operates without an application of voltage to the probe. In certain embodiments, the probe is oriented such that a distal end faces an inlet of the mass spectrometer. In other embodiments, the distal end of the probe is 5 mm or less from an inlet of the mass spectrometer.

  14. A High Throughput Ambient Mass Spectrometric Approach to Species Identification and Classification from Chemical Fingerprint Signatures

    Musah, Rabi A.; Espinoza, Edgard O.; Cody, Robert B.; Lesiak, Ashton D.; Christensen, Earl D.; Moore, Hannah E.; Maleknia, Simin; Drijfhout, Falko P.

    2015-01-01

    A high throughput method for species identification and classification through chemometric processing of direct analysis in real time (DART) mass spectrometry-derived fingerprint signatures has been developed. The method entails introduction of samples to the open air space between the DART ion source and the mass spectrometer inlet, with the entire observed mass spectral fingerprint subjected to unsupervised hierarchical clustering processing. A range of both polar and non-polar chemotypes are instantaneously detected. The result is identification and species level classification based on the entire DART-MS spectrum. Here, we illustrate how the method can be used to: (1) distinguish between endangered woods regulated by the Convention for the International Trade of Endangered Flora and Fauna (CITES) treaty; (2) assess the origin and by extension the properties of biodiesel feedstocks; (3) determine insect species from analysis of puparial casings; (4) distinguish between psychoactive plants products; and (5) differentiate between Eucalyptus species. An advantage of the hierarchical clustering approach to processing of the DART-MS derived fingerprint is that it shows both similarities and differences between species based on their chemotypes. Furthermore, full knowledge of the identities of the constituents contained within the small molecule profile of analyzed samples is not required. PMID:26156000

  15. Towards a regional beef carcass classification system for Southern ...

    This is partly because the current beef carcass grading and classification systems used in the region value inappropriately carcasses from slow-maturing indigenous cattle breeds that are ideally suited to being marketed off natural pasture. The existing systems use carcass yield and quality attributes, but do not predict ...

  16. Classification system for reporting events involving human malfunctions

    Rasmussen, J.; Pedersen, O.M.; Mancini, G.; Carnino, A.; Griffon, M.; Gagnolet, P.

    1981-03-01

    The report describes a set of categories for reporting industrial incidents and events involving human malfunction. The classification system aims at ensuring information adequate for improvement of human work situations and man-machine interface systems and for attempts to quantify ''human error'' rates. The classification system has a multifacetted non-hierarchial structure and its compatibility with Ispra's ERDS classification is described. The collection of the information in general and for quantification purposes are discussed. 24 categories, 12 of which being human factors oriented, are listed with their respective subcategories, and comments are given. Underlying models of human data processes and their typical malfunctions and of a human decision sequence are described. (author)

  17. Classification system for reporting events involving human malfunctions

    Rasmussen, J.; Pedersen, O.M.; Mancini, G.

    1981-01-01

    The report describes a set of categories for reporting industrial incidents and events involving human malfunction. The classification system aims at ensuring information adequate for improvement of human work situations and man-machine interface systems and for attempts to quantify ''human error'' rates. The classification system has a multifacetted non-hierarchical structure and its compatibility with Ispra's ERDS classification is described. The collection of the information in general and for quantification purposes are discussed. 24 categories, 12 of which being human factors-oriented, are listed with their respective subcategories, and comments are given. Underlying models of human data process and their typical malfuntions and of a human decision sequence are described. The work reported is a joint contribution to the CSNI Group of Experts on Human Error Data and Assessment

  18. Modified Mahalanobis Taguchi System for Imbalance Data Classification

    Mahmoud El-Banna

    2017-01-01

    Full Text Available The Mahalanobis Taguchi System (MTS is considered one of the most promising binary classification algorithms to handle imbalance data. Unfortunately, MTS lacks a method for determining an efficient threshold for the binary classification. In this paper, a nonlinear optimization model is formulated based on minimizing the distance between MTS Receiver Operating Characteristics (ROC curve and the theoretical optimal point named Modified Mahalanobis Taguchi System (MMTS. To validate the MMTS classification efficacy, it has been benchmarked with Support Vector Machines (SVMs, Naive Bayes (NB, Probabilistic Mahalanobis Taguchi Systems (PTM, Synthetic Minority Oversampling Technique (SMOTE, Adaptive Conformal Transformation (ACT, Kernel Boundary Alignment (KBA, Hidden Naive Bayes (HNB, and other improved Naive Bayes algorithms. MMTS outperforms the benchmarked algorithms especially when the imbalance ratio is greater than 400. A real life case study on manufacturing sector is used to demonstrate the applicability of the proposed model and to compare its performance with Mahalanobis Genetic Algorithm (MGA.

  19. Classification system for reporting events involving human malfunctions

    Rasmussen, Jens; Pedersen, O.M.; Mancini, G.

    1981-01-01

    The report describes a set of categories for reporting indus-trial incidents and events involving human malfunction. The classification system aims at ensuring information adequate for improvement of human work situations and man-machine interface systems and for attempts to quantify "human error......" rates. The classification system has a multifacetted non-hierarchical struc-ture and its compatibility with Isprals ERDS classification is described. The collection of the information in general and for quantification purposes are discussed. 24 categories, 12 of which being human factors oriented......, are listed with their respective subcategories, and comments are given. Underlying models of human data processes and their typical malfunc-tions and of a human decision sequence are described....

  20. A classification system for tableting behaviors of binary powder mixtures

    Changquan Calvin Sun

    2016-08-01

    Full Text Available The ability to predict tableting properties of a powder mixture from individual components is of both fundamental and practical importance to the efficient formulation development of tablet products. A common tableting classification system (TCS of binary powder mixtures facilitates the systematic development of new knowledge in this direction. Based on the dependence of tablet tensile strength on weight fraction in a binary mixture, three main types of tableting behavior are identified. Each type is further divided to arrive at a total of 15 sub-classes. The proposed classification system lays a framework for a better understanding of powder interactions during compaction. Potential applications and limitations of this classification system are discussed.

  1. CLASSIFICATION OF THE MGR WASTE HANDLING BUILDING VENTILATION SYSTEM

    J.A. Ziegler

    2000-01-01

    The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) waste handling building ventilation system structures, systems and components (SSCs) performed by the MGR Preclosure Safety and Systems Engineering Section. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMP 2000). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333P, ''Quality Assurance Requirements and Description'' (QARD) (DOE 2000). This QA classification incorporates the current MGR design and the results of the ''Design Basis Event Frequency and Dose Calculation for Site Recommendation'' (CRWMS M andO 2000a) and ''Bounding Individual Category 1 Design Basis Event Dose Calculation to Support Quality Assurance Classification'' (Gwyn 2000)

  2. Modified Mahalanobis Taguchi System for Imbalance Data Classification

    2017-01-01

    The Mahalanobis Taguchi System (MTS) is considered one of the most promising binary classification algorithms to handle imbalance data. Unfortunately, MTS lacks a method for determining an efficient threshold for the binary classification. In this paper, a nonlinear optimization model is formulated based on minimizing the distance between MTS Receiver Operating Characteristics (ROC) curve and the theoretical optimal point named Modified Mahalanobis Taguchi System (MMTS). To validate the MMTS classification efficacy, it has been benchmarked with Support Vector Machines (SVMs), Naive Bayes (NB), Probabilistic Mahalanobis Taguchi Systems (PTM), Synthetic Minority Oversampling Technique (SMOTE), Adaptive Conformal Transformation (ACT), Kernel Boundary Alignment (KBA), Hidden Naive Bayes (HNB), and other improved Naive Bayes algorithms. MMTS outperforms the benchmarked algorithms especially when the imbalance ratio is greater than 400. A real life case study on manufacturing sector is used to demonstrate the applicability of the proposed model and to compare its performance with Mahalanobis Genetic Algorithm (MGA). PMID:28811820

  3. A proposal of criteria for the classification of systemic sclerosis.

    Nadashkevich, Oleg; Davis, Paul; Fritzler, Marvin J

    2004-11-01

    Sensitive and specific criteria for the classification of systemic sclerosis are required by clinicians and investigators to achieve higher quality clinical studies and approaches to therapy. A clinical study of systemic sclerosis patients in Europe and Canada led to a set of criteria that achieve high sensitivity and specificity. Both clinical and laboratory investigations of patients with systemic sclerosis, related conditions and diseases with clinical features that can be mistaken as part of the systemic sclerosis spectrum were undertaken. Laboratory investigations included the detection of autoantibodies to centromere proteins, Scl-70 (topoisomerase I), and fibrillarin (U3-RNP). Based on the investigation of 269 systemic sclerosis patients and 720 patients presenting with related and confounding conditions, the following set of criteria for the classification of systemic sclerosis was proposed: 1) autoantibodies to: centromere proteins, Scl-70 (topo I), fibrillarin; 2) bibasilar pulmonary fibrosis; 3) contractures of the digital joints or prayer sign; 4) dermal thickening proximal to the wrists; 5) calcinosis cutis; 6) Raynaud's phenomenon; 7) esophageal distal hypomotility or reflux-esophagitis; 8) sclerodactyly or non-pitting digital edema; 9) teleangiectasias. The classification of definite SSc requires at least three of the above criteria. Criteria for the classification of systemic sclerosis have been proposed. Preliminary testing has defined the sensitivity and specificity of these criteria as high as 99% and 100%, respectively. Testing and validation of the proposed criteria by other clinical centers is required.

  4. Low-cost real-time automatic wheel classification system

    Shabestari, Behrouz N.; Miller, John W. V.; Wedding, Victoria

    1992-11-01

    This paper describes the design and implementation of a low-cost machine vision system for identifying various types of automotive wheels which are manufactured in several styles and sizes. In this application, a variety of wheels travel on a conveyor in random order through a number of processing steps. One of these processes requires the identification of the wheel type which was performed manually by an operator. A vision system was designed to provide the required identification. The system consisted of an annular illumination source, a CCD TV camera, frame grabber, and 386-compatible computer. Statistical pattern recognition techniques were used to provide robust classification as well as a simple means for adding new wheel designs to the system. Maintenance of the system can be performed by plant personnel with minimal training. The basic steps for identification include image acquisition, segmentation of the regions of interest, extraction of selected features, and classification. The vision system has been installed in a plant and has proven to be extremely effective. The system properly identifies the wheels correctly up to 30 wheels per minute regardless of rotational orientation in the camera's field of view. Correct classification can even be achieved if a portion of the wheel is blocked off from the camera. Significant cost savings have been achieved by a reduction in scrap associated with incorrect manual classification as well as a reduction of labor in a tedious task.

  5. Intelligence system based classification approach for medical disease diagnosis

    Sagir, Abdu Masanawa; Sathasivam, Saratha

    2017-08-01

    The prediction of breast cancer in women who have no signs or symptoms of the disease as well as survivability after undergone certain surgery has been a challenging problem for medical researchers. The decision about presence or absence of diseases depends on the physician's intuition, experience and skill for comparing current indicators with previous one than on knowledge rich data hidden in a database. This measure is a very crucial and challenging task. The goal is to predict patient condition by using an adaptive neuro fuzzy inference system (ANFIS) pre-processed by grid partitioning. To achieve an accurate diagnosis at this complex stage of symptom analysis, the physician may need efficient diagnosis system. A framework describes methodology for designing and evaluation of classification performances of two discrete ANFIS systems of hybrid learning algorithms least square estimates with Modified Levenberg-Marquardt and Gradient descent algorithms that can be used by physicians to accelerate diagnosis process. The proposed method's performance was evaluated based on training and test datasets with mammographic mass and Haberman's survival Datasets obtained from benchmarked datasets of University of California at Irvine's (UCI) machine learning repository. The robustness of the performance measuring total accuracy, sensitivity and specificity is examined. In comparison, the proposed method achieves superior performance when compared to conventional ANFIS based gradient descent algorithm and some related existing methods. The software used for the implementation is MATLAB R2014a (version 8.3) and executed in PC Intel Pentium IV E7400 processor with 2.80 GHz speed and 2.0 GB of RAM.

  6. Intelligent Decision Support System for Bank Loans Risk Classification

    杨保安; 马云飞; 俞莲

    2001-01-01

    Intelligent Decision Support System (IISS) for Bank Loans Risk Classification (BLRC), based on the way of integration Artificial Neural Network (ANN) and Expert System (ES), is proposed. According to the feature of BLRC, the key financial and non-financial factors are analyzed. Meanwhile, ES and Model Base (MB) which contain ANN are designed . The general framework,interaction and integration of the system are given. In addition, how the system realizes BLRC is elucidated in detail.

  7. A classification tree for the prediction of benign versus malignant disease in patients with small renal masses.

    Rendon, Ricardo A; Mason, Ross J; Kirkland, Susan; Lawen, Joseph G; Abdolell, Mohamed

    2014-08-01

    To develop a classification tree for the preoperative prediction of benign versus malignant disease in patients with small renal masses. This is a retrospective study including 395 consecutive patients who underwent surgical treatment for a renal mass classification tree to predict the risk of having a benign renal mass preoperatively was developed using recursive partitioning analysis for repeated measures outcomes. Age, sex, volume on preoperative imaging, tumor location (central/peripheral), degree of endophytic component (1%-100%), and tumor axis position were used as potential predictors to develop the model. Forty-five patients (11.4%) were found to have a benign mass postoperatively. A classification tree has been developed which can predict the risk of benign disease with an accuracy of 88.9% (95% CI: 85.3 to 91.8). The significant prognostic factors in the classification tree are tumor volume, degree of endophytic component and symptoms at diagnosis. As an example of its utilization, a renal mass with a volume of classification tree to predict the risk of benign disease in small renal masses has been developed to aid the clinician when deciding on treatment strategies for small renal masses.

  8. Neighborhood Structural Similarity Mapping for the Classification of Masses in Mammograms.

    Rabidas, Rinku; Midya, Abhishek; Chakraborty, Jayasree

    2018-05-01

    In this paper, two novel feature extraction methods, using neighborhood structural similarity (NSS), are proposed for the characterization of mammographic masses as benign or malignant. Since gray-level distribution of pixels is different in benign and malignant masses, more regular and homogeneous patterns are visible in benign masses compared to malignant masses; the proposed method exploits the similarity between neighboring regions of masses by designing two new features, namely, NSS-I and NSS-II, which capture global similarity at different scales. Complementary to these global features, uniform local binary patterns are computed to enhance the classification efficiency by combining with the proposed features. The performance of the features are evaluated using the images from the mini-mammographic image analysis society (mini-MIAS) and digital database for screening mammography (DDSM) databases, where a tenfold cross-validation technique is incorporated with Fisher linear discriminant analysis, after selecting the optimal set of features using stepwise logistic regression method. The best area under the receiver operating characteristic curve of 0.98 with an accuracy of is achieved with the mini-MIAS database, while the same for the DDSM database is 0.93 with accuracy .

  9. 78 FR 18252 - Prevailing Rate Systems; North American Industry Classification System Based Federal Wage System...

    2013-03-26

    ...-AM78 Prevailing Rate Systems; North American Industry Classification System Based Federal Wage System... applicable sections. The Federal Prevailing Rate Advisory Committee, the national labor- management committee... proposing to amend 5 CFR part 532 as follows: PART 532--PREVAILING RATE SYSTEMS 0 1. The authority citation...

  10. Semiquantitative dynamic contrast-enhanced MRI for accurate classification of complex adnexal masses.

    Kazerooni, Anahita Fathi; Malek, Mahrooz; Haghighatkhah, Hamidreza; Parviz, Sara; Nabil, Mahnaz; Torbati, Leila; Assili, Sanam; Saligheh Rad, Hamidreza; Gity, Masoumeh

    2017-02-01

    To identify the best dynamic contrast-enhanced (DCE) magnetic resonance imaging (MRI) descriptive parameters in predicting malignancy of complex ovarian masses, and develop an optimal decision tree for accurate classification of benign and malignant complex ovarian masses. Preoperative DCE-MR images of 55 sonographically indeterminate ovarian masses (27 benign and 28 malignant) were analyzed prospectively. Four descriptive parameters of the dynamic curve, namely, time-to-peak (TTP), wash-in-rate (WIR), relative signal intensity (SI rel ), and the initial area under the curve (IAUC 60 ) were calculated on the normalized curves of specified regions-of-interest (ROIs). A two-tailed Student's t-test and two automated classifiers, linear discriminant analysis (LDA) and support vector machines (SVMs), were used to compare the performance of the mentioned parameters individually and in combination with each other. TTP (P = 6.15E-8) and WIR (P = 5.65E-5) parameters induced the highest sensitivity (89% for LDA, and 97% for SVM) and specificity (93% for LDA, and 100% for SVM), respectively. Regarding the high sensitivity of TTP and high specificity of WIR and through their combination, an accurate and simple decision-tree classifier was designed using the line equation obtained by LDA classification model. The proposed classifier achieved an accuracy of 89% and area under the ROC curve of 93%. In this study an accurate decision-tree classifier based on a combination of TTP and WIR parameters was proposed, which provides a clinically flexible framework to aid radiologists/clinicians to reach a conclusive preoperative diagnosis and patient-specific therapy plan for distinguishing malignant from benign complex ovarian masses. 2 J. Magn. Reson. Imaging 2017;45:418-427. © 2016 International Society for Magnetic Resonance in Medicine.

  11. Quality assurance: The 10-Group Classification System (Robson classification), induction of labor, and cesarean delivery.

    Robson, Michael

    2015-10-01

    Quality assurance in labor and delivery is needed. The method must be simple and consistent, and be of universal value. It needs to be clinically relevant, robust, and prospective, and must incorporate epidemiological variables. The 10-Group Classification System (TGCS) is a simple method providing a common starting point for further detailed analysis within which all perinatal events and outcomes can be measured and compared. The system is demonstrated in the present paper using data for 2013 from the National Maternity Hospital in Dublin, Ireland. Interpretation of the classification can be easily taught. The standard table can provide much insight into the philosophy of care in the population of women studied and also provide information on data quality. With standardization of audit of events and outcomes, any differences in either sizes of groups, events or outcomes can be explained only by poor data collection, significant epidemiological variables, or differences in practice. In April 2015, WHO proposed that the TGCS (also known as the Robson classification) is used as a global standard for assessing, monitoring, and comparing cesarean delivery rates within and between healthcare facilities.

  12. Evolution and classification of the CRISPR-Cas systems

    S. Makarova, Kira; H. Haft, Daniel; Barrangou, Rodolphe; J. J. Brouns, Stan; Charpentier, Emmanuelle; Horvath, Philippe; Moineau, Sylvain; J. M. Mojica, Francisco; I. Wolf, Yuri; Yakunin, Alexander F.; van der Oost, John; V. Koonin, Eugene

    2012-01-01

    The CRISPR–Cas (clustered regularly interspaced short palindromic repeats–CRISPR-associated proteins) modules are adaptive immunity systems that are present in many archaea and bacteria. These defence systems are encoded by operons that have an extraordinarily diverse architecture and a high rate of evolution for both the cas genes and the unique spacer content. Here, we provide an updated analysis of the evolutionary relationships between CRISPR–Cas systems and Cas proteins. Three major types of CRISPR–Cas system are delineated, with a further division into several subtypes and a few chimeric variants. Given the complexity of the genomic architectures and the extremely dynamic evolution of the CRISPR–Cas systems, a unified classification of these systems should be based on multiple criteria. Accordingly, we propose a `polythetic' classification that integrates the phylogenies of the most common cas genes, the sequence and organization of the CRISPR repeats and the architecture of the CRISPR–cas loci. PMID:21552286

  13. Classification system for acute and chronic radiation treatment sequelae

    Seegenschmiedt, M.H.; Sauer, R.

    1993-01-01

    A classification system in German language is proposed for scoring of acute and chronic treatment sequelae after radiotherapy. It includes all important organs and organ systems. The proposed grading corresponds to the four-scale-system of the WHO and UICC. The system is also compatible to the RTOG and EORTC acute and late radiation morbidity scoring criteria. This facilitates the data transfer for retrospective and prospective analysis of monomodal and multimodal radiotherapy treatment regimes. We recommend to use this scoring system in all German speaking countries for multicentric prospective studies. It is possible, that organ-specific sophistications of the toxicity grading will be developed in the future. These additions should conform with (inter)national standards and apply the same four-scale grading of this classification system. (orig.) [de

  14. Changing patient classification system for hospital reimbursement in Romania.

    Radu, Ciprian-Paul; Chiriac, Delia Nona; Vladescu, Cristian

    2010-06-01

    To evaluate the effects of the change in the diagnosis-related group (DRG) system on patient morbidity and hospital financial performance in the Romanian public health care system. Three variables were assessed before and after the classification switch in July 2007: clinical outcomes, the case mix index, and hospital budgets, using the database of the National School of Public Health and Health Services Management, which contains data regularly received from hospitals reimbursed through the Romanian DRG scheme (291 in 2009). The lack of a Romanian system for the calculation of cost-weights imposed the necessity to use an imported system, which was criticized by some clinicians for not accurately reflecting resource consumption in Romanian hospitals. The new DRG classification system allowed a more accurate clinical classification. However, it also exposed a lack of physicians' knowledge on diagnosing and coding procedures, which led to incorrect coding. Consequently, the reported hospital morbidity changed after the DRG switch, reflecting an increase in the national case-mix index of 25% in 2009 (compared with 2007). Since hospitals received the same reimbursement over the first two years after the classification switch, the new DRG system led them sometimes to change patients' diagnoses in order to receive more funding. Lack of oversight of hospital coding and reporting to the national reimbursement scheme allowed the increase in the case-mix index. The complexity of the new classification system requires more resources (human and financial), better monitoring and evaluation, and improved legislation in order to achieve better hospital resource allocation and more efficient patient care.

  15. Hotel Classification Systems: A Comparison of International Case Studies

    Roberta Minazzi,

    2010-12-01

    Full Text Available Over the last few decades we have witnessed an increasing interest of scholars andespecially operators in service quality in the lodging business. Firstly, it is important to observe thatthe diverseness of the hospitality industry also affects the classification of hotel quality. We canactually find many programmes, classifications and seals of quality promoted by public authoritiesand private companies that create confusion in the consumer perceptions of hotel quality. Moreover,new electronic distribution channels and their ratings are becoming a new way to gather informationabout a hotel and its quality. Secondly, a point that can cause complications is that different countriesand regions can choose differing approaches depending on the features of the classification (numberof levels, symbols used, etc. and the nature of the programme (public, private. Considering theseassumptions and the recent changes in the Italian hotel classification system, this paper aims toanalyse the situation in Italy, underlining both its positive and negative aspects and comparing it withother European and North American cases. Based on a review of literature and tourism laws as wellas personal interviews with public authorities and exponents of the private sectors, we were able toidentify critical issues and trends in hotel classification systems. The comparison of case studiesshows a heterogeneous situation. Points in common are the scale and the symbol used but, if weanalyse the requirements of each category, we discover very different circumstances, also sometimesin the same country. A future European classification system could be possible only after astandardization of minimum requirements and criteria at a national level. In this situation brands andonline consumers’ feedbacks become even more considered by the customers in the hospitalityindustry.

  16. Developing a consensus classification system for acute renal failure

    Kellum, John A.; Levin, Nathan; Bouman, Catherine; Lameire, Norbert

    2002-01-01

    A biochemical definition and classification system for acute renal dysfunction is long overdue. Its absence has impeded progress in clinical and even basic research concerning a syndrome associated with mortality rates of 30 to 80%. No definition of acute renal dysfunction will be perfect, but the

  17. Classification of $E_{0}$-semigroups by product systems

    Skeide, Michael

    2016-01-01

    In these notes the author presents a complete theory of classification of E_0-semigroups by product systems of correspondences. As an application of his theory, he answers the fundamental question if a Markov semigroup admits a dilation by a cocycle perturbations of noise: It does if and only if it is spatial.

  18. The Spinal Cord Injury-Interventions Classification System

    van Langeveld, A.H.B.

    2010-01-01

    Title: The Spinal Cord Injury-Interventions Classification System: development and evaluation of a documentation tool to record therapy to improve mobility and self-care in people with spinal cord injury. Background: Many rehabilitation researchers have emphasized the need to examine the actual

  19. Awareness and use of Gross Motor Function Classification System ...

    Introduction The degree of disability in children with Cerebral Palsy (CP) can be evaluated with the Gross Motor Function Classification System (GMFCS), a valid tool which was designed for such purposes. However, there appears to be paucity of data on the awareness and use of the GMFCS particularly in the ...

  20. An intelligent temporal pattern classification system using fuzzy ...

    In this paper, we propose a new pattern classification system by combining Temporal features with Fuzzy Min–Max (TFMM) neural network based classifier for effective decision support in medical diagnosis. Moreover, a Particle Swarm Optimization (PSO) algorithm based rule extractor is also proposed in this work for ...

  1. A Classification System for Recurrent Ameloblastoma of the Jaws ...

    This paper reviewed the clinicopathologic presentation of recurrent ameloblastoma in 30 Nigerian patients at three tertiary referral centers with the sole objective of developing a classification system. Most recurrences occurred in patients in their 3rd decade of life (20-29years) and males were more frequently affected than ...

  2. Performance of classification confidence measures in dynamic classifier systems

    Štefka, D.; Holeňa, Martin

    2013-01-01

    Roč. 23, č. 4 (2013), s. 299-319 ISSN 1210-0552 R&D Projects: GA ČR GA13-17187S Institutional support: RVO:67985807 Keywords : classifier combining * dynamic classifier systems * classification confidence Subject RIV: IN - Informatics, Computer Science Impact factor: 0.412, year: 2013

  3. The development of a classification system for inland aquatic ...

    2015-10-05

    Oct 5, 2015 ... 6Department of Plant Sciences, University of the Free State, Qwaqwa Campus, Private .... classification systems for wetlands and other inland aquatic ... of vegetation, soil, inundation and landform features that are ... nised as the fundamental drivers that determine the existence ...... Earth Obs. Remote Sens.

  4. Standard practice for classification of computed radiology systems

    American Society for Testing and Materials. Philadelphia

    2005-01-01

    1.1 This practice describes the evaluation and classification of a computed radiography (CR) system, a particular phosphor imaging plate (IP), system scanner and software, in combination with specified metal screens for industrial radiography. It is intended to ensure that the evaluation of image quality, as far as this is influenced by the scanner/IP system, meets the needs of users. 1.2 The practice defines system tests to be used to classify the systems of different suppliers and make them comparable for users. 1.3 The CR system performance is described by signal and noise parameters. For film systems, the signal is represented by gradient and the noise by granularity. The signal-to-noise ratio is normalized by the basic spatial resolution of the system and is part of classification. The normalization is given by the scanning aperture of 100 µm diameter for the micro-photometer, which is defined in Test Method E1815 for film system classification. This practice describes how the parameters shall be meas...

  5. Unstable mass outflow from a binary system

    Nariai, K [Tokyo Univ., Mitaka (Japan). Tokyo Astronomical Observatory; Sugimoto, D

    1976-12-01

    A contact binary system which fills the outer Lagrangian lobe is unstable against the mass loss from the second Lagrangian point. The effect of the mass loss on the remaining system is studied for several typical cases. It is shown that the separation between the components at the periastron decreases with a high rate in most cases; therefore, the system continues to lose mass once gas begins to flow out from the second Lagrangian point.

  6. Using Spores for Fusarium spp. Classification by MALDI-Based Intact Cell/Spore Mass Spectrometry

    Wolfgang Winkler

    2012-01-01

    Full Text Available Fusarium is a widespread genus of filamentous fungi and a member of the soil microbial community. Certain subspecies are health threatening because of their mycotoxin production that affects the human and animal food chain. Thus, for early and effective pest control, species identification is of particular interest; however, differentiation on the subspecies level is challenging and time-consuming for this fungus. In the present study, we show the possibilities of intact cell mass spectrometry for spore analysis of 22 different Fusarium strains belonging to six Fusarium subspecies. We found that species differentiation is possible if mass spectrometric analyses are performed under well-defined conditions with fixed parameters. A critical point for analysis is a proper sample preparation of spores, which increases the quality of mass spectra with respect to signal intensity and m/z value variations. It was concluded that data acquistion has to be performed automatically; otherwise, user-specific variations are introduced generating data which cannot fit the existing datasets. Data that show clearly that matrix-assisted laser desorption ionization-based intact cell/intact spore mass spectrometry (IC/ISMS can be applied to differentiate closely related Fusarium spp. are presented. Results show a potential to build a database on Fusarium species for accurate species identification, for fast response in the case of infections in the cornfield. We furthermore demonstrate the high precision of our approach in classification of intact Fusarium species according to the location of their collection.

  7. A Classification System for Hospital-Based Infection Outbreaks

    Paul S. Ganney

    2010-01-01

    Full Text Available Outbreaks of infection within semi-closed environments such as hospitals, whether inherent in the environment (such as Clostridium difficile (C.Diff or Methicillinresistant Staphylococcus aureus (MRSA or imported from the wider community (such as Norwalk-like viruses (NLVs, are difficult to manage. As part of our work on modelling such outbreaks, we have developed a classification system to describe the impact of a particular outbreak upon an organization. This classification system may then be used in comparing appropriate computer models to real outbreaks, as well as in comparing different real outbreaks in, for example, the comparison of differing management and containment techniques and strategies. Data from NLV outbreaks in the Hull and East Yorkshire Hospitals NHS Trust (the Trust over several previous years are analysed and classified, both for infection within staff (where the end of infection date may not be known and within patients (where it generally is known. A classification system consisting of seven elements is described, along with a goodness-of-fit method for comparing a new classification to previously known ones, for use in evaluating a simulation against history and thereby determining how ‘realistic’ (or otherwise it is.

  8. A classification system for hospital-based infection outbreaks.

    Ganney, Paul S; Madeo, Maurice; Phillips, Roger

    2010-12-01

    Outbreaks of infection within semi-closed environments such as hospitals, whether inherent in the environment (such as Clostridium difficile (C.Diff) or Methicillin-resistant Staphylococcus aureus (MRSA) or imported from the wider community (such as Norwalk-like viruses (NLVs)), are difficult to manage. As part of our work on modelling such outbreaks, we have developed a classification system to describe the impact of a particular outbreak upon an organization. This classification system may then be used in comparing appropriate computer models to real outbreaks, as well as in comparing different real outbreaks in, for example, the comparison of differing management and containment techniques and strategies. Data from NLV outbreaks in the Hull and East Yorkshire Hospitals NHS Trust (the Trust) over several previous years are analysed and classified, both for infection within staff (where the end of infection date may not be known) and within patients (where it generally is known). A classification system consisting of seven elements is described, along with a goodness-of-fit method for comparing a new classification to previously known ones, for use in evaluating a simulation against history and thereby determining how 'realistic' (or otherwise) it is.

  9. 78 FR 58153 - Prevailing Rate Systems; North American Industry Classification System Based Federal Wage System...

    2013-09-23

    ... American Industry Classification System Based Federal Wage System Wage Surveys AGENCY: U.S. Office of... in Federal Wage System wage survey industry regulations with the 2012 NAICS revisions published by.... Applicability date: This rule applies for local wage surveys beginning on or after February 21, 2014. FOR...

  10. Design and implementation based on the classification protection vulnerability scanning system

    Wang Chao; Lu Zhigang; Liu Baoxu

    2010-01-01

    With the application and spread of the classification protection, Network Security Vulnerability Scanning should consider the efficiency and the function expansion. It proposes a kind of a system vulnerability from classification protection, and elaborates the design and implementation of a vulnerability scanning system based on vulnerability classification plug-in technology and oriented classification protection. According to the experiment, the application of classification protection has good adaptability and salability with the system, and it also approves the efficiency of scanning. (authors)

  11. Annotation and Classification of CRISPR-Cas Systems.

    Makarova, Kira S; Koonin, Eugene V

    2015-01-01

    The clustered regularly interspaced short palindromic repeats (CRISPR)-Cas (CRISPR-associated proteins) is a prokaryotic adaptive immune system that is represented in most archaea and many bacteria. Among the currently known prokaryotic defense systems, the CRISPR-Cas genomic loci show unprecedented complexity and diversity. Classification of CRISPR-Cas variants that would capture their evolutionary relationships to the maximum possible extent is essential for comparative genomic and functional characterization of this theoretically and practically important system of adaptive immunity. To this end, a multipronged approach has been developed that combines phylogenetic analysis of the conserved Cas proteins with comparison of gene repertoires and arrangements in CRISPR-Cas loci. This approach led to the current classification of CRISPR-Cas systems into three distinct types and ten subtypes for each of which signature genes have been identified. Comparative genomic analysis of the CRISPR-Cas systems in new archaeal and bacterial genomes performed over the 3 years elapsed since the development of this classification makes it clear that new types and subtypes of CRISPR-Cas need to be introduced. Moreover, this classification system captures only part of the complexity of CRISPR-Cas organization and evolution, due to the intrinsic modularity and evolutionary mobility of these immunity systems, resulting in numerous recombinant variants. Moreover, most of the cas genes evolve rapidly, complicating the family assignment for many Cas proteins and the use of family profiles for the recognition of CRISPR-Cas subtype signatures. Further progress in the comparative analysis of CRISPR-Cas systems requires integration of the most sensitive sequence comparison tools, protein structure comparison, and refined approaches for comparison of gene neighborhoods.

  12. CLASSIFICATION OF THE MGR MAINTENANCE AND SUPPLY SYSTEM

    J.A. Ziegler

    1999-01-01

    The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) maintenance and supply system structures, systems and components (SSCs) performed by the MGR Safety Assurance Department. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMP 1998). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333P, ''Quality Assurance Requirements and Description'' (QARD) (DOE 1998)

  13. A Chinese text classification system based on Naive Bayes algorithm

    Cui Wei

    2016-01-01

    Full Text Available In this paper, aiming at the characteristics of Chinese text classification, using the ICTCLAS(Chinese lexical analysis system of Chinese academy of sciences for document segmentation, and for data cleaning and filtering the Stop words, using the information gain and document frequency feature selection algorithm to document feature selection. Based on this, based on the Naive Bayesian algorithm implemented text classifier , and use Chinese corpus of Fudan University has carried on the experiment and analysis on the system.

  14. CLASSIFICATION OF THE MGR SITE COMPRESSED AIR SYSTEM

    J.A. Ziegler

    1999-01-01

    The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) site compressed air system structures, systems and components (SSCs) performed by the MGR Safety Assurance Department. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMP 1998). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333P, ''Quality Assurance Requirements and Description'' (QARD) (DOE 1998)

  15. CLASSIFICATION OF THE MGR WASTE HANDLING BUILDING ELECTRICAL SYSTEM

    S.E. Salzman

    1999-01-01

    The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) waste handling building electrical system structures, systems and components (SSCs) performed by the MGR Safety Assurance Department. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMP 1998). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333P, ''Quality Assurance Requirements and Description'' (QARD) (DOE 1998)

  16. CLASSIFICATION OF THE MGR OPERATIONS MONITORING AND CONTROL SYSTEM

    R.J. Garrett

    1999-01-01

    The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) Operations Monitoring and Control System structures, systems and components (SSCs) performed by the MGR Safety Assurance Department. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMP 1998). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333P7 ''Quality Assurance Requirements and Description'' (QARD) (DOE 1998)

  17. Classification of building systems for concrete 3D printing

    DUBALLET , Romain; BAVEREL , Olivier; Dirrenberger , Justin

    2017-01-01

    In the present paper, a study is conducted on building systems associated with concrete extrusion-based additive manufacturing techniques. Specific parameters are highlighted - concerning scale, environment, support, and assembly strategies - and a classification method is introduced. The objective is to explicitly characterise construction systems based on such printing processes. A cartography of the different approaches and subsequent robotic complexity is proposed. The state of the art ga...

  18. Annotation and Classification of CRISPR-Cas Systems

    Makarova, Kira S.; Koonin, Eugene V.

    2018-01-01

    The clustered regularly interspaced short palindromic repeats (CRISPR)-Cas (CRISPR-associated proteins) is a prokaryotic adaptive immune system that is represented in most archaea and many bacteria. Among the currently known prokaryotic defense systems, the CRISPR-Cas genomic loci show unprecedented complexity and diversity. Classification of CRISPR-Cas variants that would capture their evolutionary relationships to the maximum possible extent is essential for comparative genomic and functional characterization of this theoretically and practically important system of adaptive immunity. To this end, a multipronged approach has been developed that combines phylogenetic analysis of the conserved Cas proteins with comparison of gene repertoires and arrangements in CRISPR-Cas loci. This approach led to the current classification of CRISPR-Cas systems into three distinct types and ten subtypes for each of which signature genes have been identified. Comparative genomic analysis of the CRISPR-Cas systems in new archaeal and bacterial genomes performed over the 3 years elapsed since the development of this classification makes it clear that new types and subtypes of CRISPR-Cas need to be introduced. Moreover, this classification system captures only part of the complexity of CRISPR-Cas organization and evolution, due to the intrinsic modularity and evolutionary mobility of these immunity systems, resulting in numerous recombinant variants. Moreover, most of the cas genes evolve rapidly, complicating the family assignment for many Cas proteins and the use of family profiles for the recognition of CRISPR-Cas subtype signatures. Further progress in the comparative analysis of CRISPR-Cas systems requires integration of the most sensitive sequence comparison tools, protein structure comparison, and refined approaches for comparison of gene neighborhoods. PMID:25981466

  19. A classification system for pressure vessel shell failures

    Harrop, L.P.

    1989-01-01

    A system for classifying failures of the shells of pressure vessels is presented. The classification system is based on the way a failure physically manifests itself and not on imputed economic or safety significance. It is believed the described way of classifying the failures is useful for transferring information from one situation to another. In assigning names to types of failure, the intention has been to adopt explicit definitions rather than supposed colloquial usage. (author)

  20. A new classification system for congenital laryngeal cysts.

    Forte, Vito; Fuoco, Gabriel; James, Adrian

    2004-06-01

    A new classification system for congenital laryngeal cysts based on the extent of the cyst and on the embryologic tissue of origin is proposed. Retrospective chart review. The charts of 20 patients with either congenital or acquired laryngeal cysts that were treated surgically between 1987 and 2002 at the Hospital for Sick Children, Toronto were retrospectively reviewed. Clinical presentation, radiologic findings, surgical management, histopathology, and outcome were recorded. A new classification system is proposed to better appreciate the origin of these cysts and to guide in their successful surgical management. Fourteen of the supraglottic and subglottic simple mucous retention cysts posed no diagnostic or therapeutic challenge and were treated successfully by a single endoscopic excision or marsupialization. The remaining six patients with congenital cysts in the study were deemed more complex, and all required open surgical procedures for cure. On the basis of the analysis of the data of these patients, a new classification of congenital laryngeal cysts is proposed. Type I cysts are confined to the larynx, the cyst wall composed of endodermal elements only, and can be managed endoscopically. Type II cysts extend beyond the confines of the larynx and require an external approach. The Type II cysts are further subclassified histologically on the basis of the embryologic tissue of origin: IIa, composed of endoderm only and IIb, containing endodermal and mesodermal elements (epithelium and cartilage) in the wall of the cyst. A new classification system for congenital laryngeal cysts is proposed on the basis of the extent of the cyst and the embryologic tissue of origin. This classification can help guide the surgeon with initial management and help us better understand the origin of these cysts.

  1. Classification of Recommender Expertise in the Wikipedia Recommender System

    Jensen, Christian D.; Pilkauskas, Povilas; Lefévre, Thomas

    2011-01-01

    to the quality of articles. The Wikipedia Recommender System (WRS) was developed to help users determine the credibility of articles based on feedback from other Wikipedia users. The WRS implements a collaborative filtering system with trust metrics, i.e., it provides a rating of articles which emphasizes...... an evaluation of four existing knowledge classification schemes with respect to these requirements. This evaluation helped us identify a classification scheme, which we have implemented in the current version of the Wikipedia Recommender System....... feedback from recommenders that the user has agreed with in the past. This exposes the problem that most recommenders are not equally competent in all subject areas. The first WRS prototype did not include an evaluation of the areas of expertise of recommenders, so the trust metric used in the article...

  2. Classification of Recommender Expertise in the Wikipedia Recommender System

    Jensen, Christian D.; Pilkauskas, Povilas; Lefevre, Thomas

    2011-01-01

    to the quality of articles. The Wikipedia Recommender System (WRS) was developed to help users determine the credibility of articles based on feedback from other Wikipedia users. The WRS implements a collaborative filtering system with trust metrics, i.e., it provides a rating of articles "which emphasizes...... an evaluation of four existing knowledge classification schemes with respect to these requirements. This evaluation helped us identify a classification scheme, which we have implemented in the current version of the Wikipedia Recommender System....... feedback from recommenders that the user has agreed with in the past. This exposes the problem that most recommenders are not equally competent in all subject areas. The first WRS prototype did not include an evaluation of the areas of expertise of recommenders, so the trust metric used in the article...

  3. [Construction of biopharmaceutics classification system of Chinese materia medica].

    Liu, Yang; Wei, Li; Dong, Ling; Zhu, Mei-Ling; Tang, Ming-Min; Zhang, Lei

    2014-12-01

    Based on the characteristics of multicomponent of traditional Chinese medicine and drawing lessons from the concepts, methods and techniques of biopharmaceutics classification system (BCS) in chemical field, this study comes up with the science framework of biopharmaceutics classification system of Chinese materia medica (CMMBCS). Using the different comparison method of multicomponent level and the CMMBCS method of overall traditional Chinese medicine, the study constructs the method process while setting forth academic thoughts and analyzing theory. The basic role of this system is clear to reveal the interaction and the related absorption mechanism of multicomponent in traditional Chinese medicine. It also provides new ideas and methods for improving the quality of Chinese materia medica and the development of new drug research.

  4. Novel classification system of rib fractures observed in infants.

    Love, Jennifer C; Derrick, Sharon M; Wiersema, Jason M; Pinto, Deborrah C; Greeley, Christopher; Donaruma-Kwoh, Marcella; Bista, Bibek

    2013-03-01

    Rib fractures are considered highly suspicious for nonaccidental injury in the pediatric clinical literature; however, a rib fracture classification system has not been developed. As an aid and impetus for rib fracture research, we developed a concise schema for classifying rib fracture types and fracture location that is applicable to infants. The system defined four fracture types (sternal end, buckle, transverse, and oblique) and four regions of the rib (posterior, posterolateral, anterolateral, and anterior). It was applied to all rib fractures observed during 85 consecutive infant autopsies. Rib fractures were found in 24 (28%) of the cases. A total of 158 rib fractures were identified. The proposed schema was adequate to classify 153 (97%) of the observed fractures. The results indicate that the classification system is sufficiently robust to classify rib fractures typically observed in infants and should be used by researchers investigating infant rib fractures. © 2013 American Academy of Forensic Sciences.

  5. Computer-aided classification of breast masses using contrast-enhanced digital mammograms

    Danala, Gopichandh; Aghaei, Faranak; Heidari, Morteza; Wu, Teresa; Patel, Bhavika; Zheng, Bin

    2018-02-01

    By taking advantages of both mammography and breast MRI, contrast-enhanced digital mammography (CEDM) has emerged as a new promising imaging modality to improve efficacy of breast cancer screening and diagnosis. The primary objective of study is to develop and evaluate a new computer-aided detection and diagnosis (CAD) scheme of CEDM images to classify between malignant and benign breast masses. A CEDM dataset consisting of 111 patients (33 benign and 78 malignant) was retrospectively assembled. Each case includes two types of images namely, low-energy (LE) and dual-energy subtracted (DES) images. First, CAD scheme applied a hybrid segmentation method to automatically segment masses depicting on LE and DES images separately. Optimal segmentation results from DES images were also mapped to LE images and vice versa. Next, a set of 109 quantitative image features related to mass shape and density heterogeneity was initially computed. Last, four multilayer perceptron-based machine learning classifiers integrated with correlationbased feature subset evaluator and leave-one-case-out cross-validation method was built to classify mass regions depicting on LE and DES images, respectively. Initially, when CAD scheme was applied to original segmentation of DES and LE images, the areas under ROC curves were 0.7585+/-0.0526 and 0.7534+/-0.0470, respectively. After optimal segmentation mapping from DES to LE images, AUC value of CAD scheme significantly increased to 0.8477+/-0.0376 (pbreast tissue on lesions, segmentation accuracy was significantly improved as compared to regular mammograms, the study demonstrated that computer-aided classification of breast masses using CEDM images yielded higher performance.

  6. Categorization of intraoperative ureteroscopy complications using modified Satava classification system.

    Tepeler, Abdulkadir; Resorlu, Berkan; Sahin, Tolga; Sarikaya, Selcuk; Bayindir, Mirze; Oguz, Ural; Armagan, Abdullah; Unsal, Ali

    2014-02-01

    To review our experience with ureteroscopy (URS) in the treatment of ureteral calculi and stratify intraoperative complications of URS according to the modified Satava classification system. We performed a retrospective analysis of 1,208 patients (672 males and 536 females), with a mean age of 43.1 years (range 1-78), who underwent ureteroscopic procedures for removal of ureteral stones. Intraoperative complications were recorded according to modified Satava classification system. Grade 1 complications included incidents without consequences for the patient; grade 2 complications, which are treated intraoperatively with endoscopic surgery (grade 2a) or required endoscopic re-treatment (grade 2b); and grade 3 complications included incidents requiring open or laparoscopic surgery. The stones were completely removed in 1,067 (88.3%) patients after primary procedure by either simple extraction or after fragmentation. The overall incidence of intraoperative complications was 12.6%. The most common complications were proximal stone migration (3.9%), mucosal injury (2.8%), bleeding (1.9%), inability to reach stone (1.8%), malfunctioning or breakage of instruments (0.8%), ureteral perforation (0.8%) and ureteral avulsion (0.16%). According to modified Satava classification system, there were 4.5% grade 1; 4.4% grade 2a; 3.2% grade 2b; and 0.57% grade 3 complications. We think that modified Satava classification is a quick and simple system for describing the severity of intraoperative URS complications and this grading system will facilitate a better comparison for the surgical outcomes obtained from different centers.

  7. Improvement of the Radiological system of emergency classification in Cuba

    Jerez Vegueria, Pablo F.; Yamil Lopez Forteza; Diaz Guerra, Pedro I.

    2003-01-01

    In 1998 the National Center of Nuclear Security (CNSN), on the base of the experience in the one handling of emergencies and the preparation aspects, planning and answer, it perfects and it modernizes, with the approval of the national bigger State of the Civil Defense, the approaches of the Scale of Radiological Events approved from 1992. Given the operational experience of the System of Answer to Emergency of the Ministry Of Science Technology And Environment in the year 2001 the CNSN develops, it perfects and it puts in vigor a more complete System of Classification of Emergency of unique use for all the entities that use sources of radiations ionizations and that it also includes those answer forces that are imbricate in the Plan of Measures Against Catastrophe for cases of Radiological Accidents. The setting in vigor of this Unique System of Classification of Emergencies at national level has allowed to secure the coordination, planning and answer in an effective, quick and effective way. Presently work is exposed the philosophy on which this System of Classification was elaborated, the approaches used to classify the events as much in radioactive facilities as in the practice of the transport of radioactive materials and the activation of the forces of answers in cases of radiological emergencies

  8. Side effects of cancer therapies. International classification and documentation systems

    Seegenschmiedt, M.H.

    1998-01-01

    The publication presents and explains verified, international classification and documentation systems for side effects induced by cancer treatments, applicable in general and clinical practice and clinical research, and covers in a clearly arranged manner the whole range of treatments, including acute and chronic side effects of chemotherapy and radiotherapy, surgery, or combined therapies. The book fills a long-felt need in tumor documentation and is a major contribution to quality assurance in clinical oncology in German-speaking countries. As most parts of the book are bilingual, presenting German and English texts and terminology, it satisfies the principles of interdisciplinarity and internationality. The tabulated form chosen for presentation of classification systems and criteria facilitate the user's approach as well as application in daily work. (orig./CB) [de

  9. THE BIOPHARMACEUTICAL CLASSIFICATION SYSTEM (BCS): PRESENT STATUS AND FUTURE PROSPECTIVES

    Budhwaar Vikaas; Nanda Arun

    2012-01-01

    The Biopharmaceutical classification system (BCS) was introduced By Amidon et al., (1995) as a method for classifying drug substances based on their dose/solubility ratio and intestinal permeability. It allows predicting the in vivo pharmacokinetic performance of drug products. The drug can be categorized into four classes of BCS, namely, High solubility high permeability, low solubility high permeability, High solubility low permeability and low solubility low permeability. An objective of B...

  10. BIOPHARMACEUTICS CLASSIFICATION SYSTEM: A STRATEGIC TOOL FOR CLASSIFYING DRUG SUBSTANCES

    Rohilla Seema; Rohilla Ankur; Marwaha RK; Nanda Arun

    2011-01-01

    The biopharmaceutical classification system (BCS) is a scientific approach for classifying drug substances based on their dose/solubility ratio and intestinal permeability. The BCS has been developed to allow prediction of in vivo pharmacokinetic performance of drug products from measurements of permeability and solubility. Moreover, the drugs can be categorized into four classes of BCS on the basis of permeability and solubility namely; high permeability high solubility, high permeability lo...

  11. Automated recognition system for ELM classification in JET

    Duro, N.; Dormido, R.; Vega, J.; Dormido-Canto, S.; Farias, G.; Sanchez, J.; Vargas, H.; Murari, A.

    2009-01-01

    Edge localized modes (ELMs) are instabilities occurring in the edge of H-mode plasmas. Considerable efforts are being devoted to understanding the physics behind this non-linear phenomenon. A first characterization of ELMs is usually their identification as type I or type III. An automated pattern recognition system has been developed in JET for off-line ELM recognition and classification. The empirical method presented in this paper analyzes each individual ELM instead of starting from a temporal segment containing many ELM bursts. The ELM recognition and isolation is carried out using three signals: Dα, line integrated electron density and stored diamagnetic energy. A reduced set of characteristics (such as diamagnetic energy drop, ELM period or Dα shape) has been extracted to build supervised and unsupervised learning systems for classification purposes. The former are based on support vector machines (SVM). The latter have been developed with hierarchical and K-means clustering methods. The success rate of the classification systems is about 98% for a database of almost 300 ELMs.

  12. Interrater reliability of a Pilates movement-based classification system.

    Yu, Kwan Kenny; Tulloch, Evelyn; Hendrick, Paul

    2015-01-01

    To determine the interrater reliability for identification of a specific movement pattern using a Pilates Classification system. Videos of 5 subjects performing specific movement tasks were sent to raters trained in the DMA-CP classification system. Ninety-six raters completed the survey. Interrater reliability for the detection of a directional bias was excellent (Pi = 0.92, and K(free) = 0.89). Interrater reliability for classifying an individual into a specific subgroup was moderate (Pi = 0.64, K(free) = 0.55) however raters who had completed levels 1-4 of the DMA-CP training and reported using the assessment daily demonstrated excellent reliability (Pi = 0.89 and K(free) = 0.87). The reliability of the classification system demonstrated almost perfect agreement in determining the existence of a specific movement pattern and classifying into a subgroup for experienced raters. There was a trend for greater reliability associated with increased levels of training and experience of the raters. Copyright © 2014 Elsevier Ltd. All rights reserved.

  13. Classification of cognitive systems dedicated to data sharing

    Ogiela, Lidia; Ogiela, Marek R.

    2017-08-01

    In this paper will be presented classification of new cognitive information systems dedicated to cryptographic data splitting and sharing processes. Cognitive processes of semantic data analysis and interpretation, will be used to describe new classes of intelligent information and vision systems. In addition, cryptographic data splitting algorithms and cryptographic threshold schemes will be used to improve processes of secure and efficient information management with application of such cognitive systems. The utility of the proposed cognitive sharing procedures and distributed data sharing algorithms will be also presented. A few possible application of cognitive approaches for visual information management and encryption will be also described.

  14. Derivation and validation of the Systemic Lupus International Collaborating Clinics classification criteria for systemic lupus erythematosus

    Petri, Michelle; Orbai, Ana-Maria; Alarcón, Graciela S

    2012-01-01

    The Systemic Lupus International Collaborating Clinics (SLICC) group revised and validated the American College of Rheumatology (ACR) systemic lupus erythematosus (SLE) classification criteria in order to improve clinical relevance, meet stringent methodology requirements, and incorporate new...

  15. A Novel Classification System for Injuries After Electronic Cigarette Explosions.

    Patterson, Scott B; Beckett, Allison R; Lintner, Alicia; Leahey, Carly; Greer, Ashley; Brevard, Sidney B; Simmons, Jon D; Kahn, Steven A

    Electronic cigarettes (e-cigarettes) contain lithium batteries that have been known to explode and/or cause fires that have resulted in burn injury. The purpose of this article is to present a case study, review injuries caused by e-cigarettes, and present a novel classification system from the newly emerging patterns of burns. A case study was presented and online media reports for e-cigarette burns were queried with search terms "e-cigarette burns" and "electronic cigarette burns." The reports and injury patterns were tabulated. Analysis was then performed to create a novel classification system based on the distinct injury patterns seen in the study. Two patients were seen at our regional burn center after e-cigarette burns. One had an injury to his thigh and penis that required operative intervention after ignition of this device in his pocket. The second had a facial burn and corneal abrasions when the device exploded while he was inhaling vapor. The Internet search and case studies resulted in 26 cases for evaluation. The burn patterns were divided in direct injury from the device igniting and indirect injury when the device caused a house or car fire. A numerical classification was created: direct injury: type 1 (hand injury) 7 cases, type 2 (face injury) 8 cases, type 3 (waist/groin injury) 11 cases, and type 5a (inhalation injury from using device) 2 cases; indirect injury: type 4 (house fire injury) 7 cases and type 5b (inhalation injury from fire started by the device) 4 cases. Multiple e-cigarette injuries are occurring in the United States and distinct patterns of burns are emerging. The classification system developed in this article will aid in further study and future regulation of these dangerous devices.

  16. Dynamics of mechanical systems with variable mass

    Belyaev, Alexander

    2014-01-01

    The book presents up-to-date and unifying formulations for treating dynamics of different types of mechanical systems with variable mass. The starting point is overview of the continuum mechanics relations of balance and jump for open systems from which extended Lagrange and Hamiltonian formulations are derived. Corresponding approaches are stated at the level of analytical mechanics with emphasis on systems with a position-dependent mass and at the level of structural mechanics. Special emphasis is laid upon axially moving structures like belts and chains, and on pipes with an axial flow of fluid. Constitutive relations in the dynamics of systems with variable mass are studied with particular reference to modeling of multi-component mixtures. The dynamics of machines with a variable mass are treated in detail and conservation laws and the stability of motion will be analyzed. Novel finite element formulations for open systems in coupled fluid and structural dynamics are presented.

  17. Analysis of the effect of spatial resolution on texture features in the classification of breast masses in mammograms

    Rangayyan, R.M.; Nguyen, T.M.; Ayres, F.J.; Nandi, A.K.

    2007-01-01

    The present study investigates the effect of spatial resolution on co-occurrence matrix-based texture features in discriminating breast lesions as benign masses or malignant tumors. The highest classification result, in terms of the area under the receiver operating characteristics (ROC) curve, of A z 0.74, was obtained at the spatial resolution of 800 μm using all 14 of Haralick's texture features computed using the margins, or ribbons, of the breast masses as seen on mammograms. Furthermore, our study indicates that texture features computed using the ribbons resulted in higher classification accuracy than the same texture features computed using the corresponding regions of interest within the mass boundaries drawn by an expert radiologist. Classification experiments using each single texture feature showed that the texture F 8 , sum entropy, gives consistently high classification results with an average A z of 0.64 across all levels of resolution. At certain levels of resolution, the textures F 5 , F 9 , and F 11 individually gave the highest classification result with A z = 0.70. (orig.)

  18. An alternative respiratory sounds classification system utilizing artificial neural networks

    Rami J Oweis

    2015-04-01

    Full Text Available Background: Computerized lung sound analysis involves recording lung sound via an electronic device, followed by computer analysis and classification based on specific signal characteristics as non-linearity and nonstationarity caused by air turbulence. An automatic analysis is necessary to avoid dependence on expert skills. Methods: This work revolves around exploiting autocorrelation in the feature extraction stage. All process stages were implemented in MATLAB. The classification process was performed comparatively using both artificial neural networks (ANNs and adaptive neuro-fuzzy inference systems (ANFIS toolboxes. The methods have been applied to 10 different respiratory sounds for classification. Results: The ANN was superior to the ANFIS system and returned superior performance parameters. Its accuracy, specificity, and sensitivity were 98.6%, 100%, and 97.8%, respectively. The obtained parameters showed superiority to many recent approaches. Conclusions: The promising proposed method is an efficient fast tool for the intended purpose as manifested in the performance parameters, specifically, accuracy, specificity, and sensitivity. Furthermore, it may be added that utilizing the autocorrelation function in the feature extraction in such applications results in enhanced performance and avoids undesired computation complexities compared to other techniques.

  19. Promoting consistent use of the communication function classification system (CFCS).

    Cunningham, Barbara Jane; Rosenbaum, Peter; Hidecker, Mary Jo Cooley

    2016-01-01

    We developed a Knowledge Translation (KT) intervention to standardize the way speech-language pathologists working in Ontario Canada's Preschool Speech and Language Program (PSLP) used the Communication Function Classification System (CFCS). This tool was being used as part of a provincial program evaluation and standardizing its use was critical for establishing reliability and validity within the provincial dataset. Two theoretical foundations - Diffusion of Innovations and the Communication Persuasion Matrix - were used to develop and disseminate the intervention to standardize use of the CFCS among a cohort speech-language pathologists. A descriptive pre-test/post-test study was used to evaluate the intervention. Fifty-two participants completed an electronic pre-test survey, reviewed intervention materials online, and then immediately completed an electronic post-test survey. The intervention improved clinicians' understanding of how the CFCS should be used, their intentions to use the tool in the standardized way, and their abilities to make correct classifications using the tool. Findings from this work will be shared with representatives of the Ontario PSLP. The intervention may be disseminated to all speech-language pathologists working in the program. This study can be used as a model for developing and disseminating KT interventions for clinicians in paediatric rehabilitation. The Communication Function Classification System (CFCS) is a new tool that allows speech-language pathologists to classify children's skills into five meaningful levels of function. There is uncertainty and inconsistent practice in the field about the methods for using this tool. This study used combined two theoretical frameworks to develop an intervention to standardize use of the CFCS among a cohort of speech-language pathologists. The intervention effectively increased clinicians' understanding of the methods for using the CFCS, ability to make correct classifications, and

  20. Classification of Headache Disorders: Extending to a Multiaxial System.

    Martin, Paul R

    2016-11-01

    This article argues for extending the International Classification of Headache Disorders to include information that goes beyond diagnosis. The obvious model is a multiaxial system as has been developed for other taxonomies. An axis for recording disability and impact on functioning, and an axis for recording the triggers of headache/migraine, are perhaps the strongest contenders for adding to the system, but there are other possibilities such as lifestyle factors relevant to headache. Extensions such as these would contribute to headache management, provide clear targets for change, and encourage adoption of a biopsychosocial perspective. © 2016 American Headache Society.

  1. EFFICIENT SELECTION AND CLASSIFICATION OF INFRARED EXCESS EMISSION STARS BASED ON AKARI AND 2MASS DATA

    Huang Yafang; Li Jinzeng [National Astronomical Observatories, Chinese Academy of Sciences, 20A Datun Road, Chaoyang District, Beijing 100012 (China); Rector, Travis A. [University of Alaska, 3211 Providence Drive, Anchorage, AK 99508 (United States); Mallamaci, Carlos C., E-mail: ljz@nao.cas.cn [Observatorio Astronomico Felix Aguilar, Universidad Nacional de San Juan (Argentina)

    2013-05-15

    The selection of young stellar objects (YSOs) based on excess emission in the infrared is easily contaminated by post-main-sequence stars and various types of emission line stars with similar properties. We define in this paper stringent criteria for an efficient selection and classification of stellar sources with infrared excess emission based on combined Two Micron All Sky Survey (2MASS) and AKARI colors. First of all, bright dwarfs and giants with known spectral types were selected from the Hipparcos Catalogue and cross-identified with the 2MASS and AKARI Point Source Catalogues to produce the main-sequence and the post-main-sequence tracks, which appear as expected as tight tracks with very small dispersion. However, several of the main-sequence stars indicate excess emission in the color space. Further investigations based on the SIMBAD data help to clarify their nature as classical Be stars, which are found to be located in a well isolated region on each of the color-color (C-C) diagrams. Several kinds of contaminants were then removed based on their distribution in the C-C diagrams. A test sample of Herbig Ae/Be stars and classical T Tauri stars were cross-identified with the 2MASS and AKARI catalogs to define the loci of YSOs with different masses on the C-C diagrams. Well classified Class I and Class II sources were taken as a second test sample to discriminate between various types of YSOs at possibly different evolutionary stages. This helped to define the loci of different types of YSOs and a set of criteria for selecting YSOs based on their colors in the near- and mid-infrared. Candidate YSOs toward IC 1396 indicating excess emission in the near-infrared were employed to verify the validity of the new source selection criteria defined based on C-C diagrams compiled with the 2MASS and AKARI data. Optical spectroscopy and spectral energy distributions of the IC 1396 sample yield a clear identification of the YSOs and further confirm the criteria defined

  2. EFFICIENT SELECTION AND CLASSIFICATION OF INFRARED EXCESS EMISSION STARS BASED ON AKARI AND 2MASS DATA

    Huang Yafang; Li Jinzeng; Rector, Travis A.; Mallamaci, Carlos C.

    2013-01-01

    The selection of young stellar objects (YSOs) based on excess emission in the infrared is easily contaminated by post-main-sequence stars and various types of emission line stars with similar properties. We define in this paper stringent criteria for an efficient selection and classification of stellar sources with infrared excess emission based on combined Two Micron All Sky Survey (2MASS) and AKARI colors. First of all, bright dwarfs and giants with known spectral types were selected from the Hipparcos Catalogue and cross-identified with the 2MASS and AKARI Point Source Catalogues to produce the main-sequence and the post-main-sequence tracks, which appear as expected as tight tracks with very small dispersion. However, several of the main-sequence stars indicate excess emission in the color space. Further investigations based on the SIMBAD data help to clarify their nature as classical Be stars, which are found to be located in a well isolated region on each of the color-color (C-C) diagrams. Several kinds of contaminants were then removed based on their distribution in the C-C diagrams. A test sample of Herbig Ae/Be stars and classical T Tauri stars were cross-identified with the 2MASS and AKARI catalogs to define the loci of YSOs with different masses on the C-C diagrams. Well classified Class I and Class II sources were taken as a second test sample to discriminate between various types of YSOs at possibly different evolutionary stages. This helped to define the loci of different types of YSOs and a set of criteria for selecting YSOs based on their colors in the near- and mid-infrared. Candidate YSOs toward IC 1396 indicating excess emission in the near-infrared were employed to verify the validity of the new source selection criteria defined based on C-C diagrams compiled with the 2MASS and AKARI data. Optical spectroscopy and spectral energy distributions of the IC 1396 sample yield a clear identification of the YSOs and further confirm the criteria defined

  3. Atmospheric pressure chemical ionisation mass spectrometry analysis linked with chemometrics for food classification - a case study: geographical provenance and cultivar classification of monovarietal clarified apple juices.

    Gan, Heng-Hui; Soukoulis, Christos; Fisk, Ian

    2014-03-01

    In the present work, we have evaluated for first time the feasibility of APCI-MS volatile compound fingerprinting in conjunction with chemometrics (PLS-DA) as a new strategy for rapid and non-destructive food classification. For this purpose 202 clarified monovarietal juices extracted from apples differing in their botanical and geographical origin were used for evaluation of the performance of APCI-MS as a classification tool. For an independent test set PLS-DA analyses of pre-treated spectral data gave 100% and 94.2% correct classification rate for the classification by cultivar and geographical origin, respectively. Moreover, PLS-DA analysis of APCI-MS in conjunction with GC-MS data revealed that masses within the spectral ACPI-MS data set were related with parent ions or fragments of alkyesters, carbonyl compounds (hexanal, trans-2-hexenal) and alcohols (1-hexanol, 1-butanol, cis-3-hexenol) and had significant discriminating power both in terms of cultivar and geographical origin. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

  4. Comparison of an automated classification system with an empirical classification of circulation patterns over the Pannonian basin, Central Europe

    Maheras, Panagiotis; Tolika, Konstantia; Tegoulias, Ioannis; Anagnostopoulou, Christina; Szpirosz, Klicász; Károssy, Csaba; Makra, László

    2018-04-01

    The aim of the study is to compare the performance of the two classification methods, based on the atmospheric circulation types over the Pannonian basin in Central Europe. Moreover, relationships including seasonal occurrences and correlation coefficients, as well as comparative diagrams of the seasonal occurrences of the circulation types of the two classification systems are presented. When comparing of the automated (objective) and empirical (subjective) classification methods, it was found that the frequency of the empirical anticyclonic (cyclonic) types is much higher (lower) than that of the automated anticyclonic (cyclonic) types both on an annual and seasonal basis. The highest and statistically significant correlations between the circulation types of the two classification systems, as well as those between the cumulated seasonal anticyclonic and cyclonic types occur in winter for both classifications, since the weather-influencing effect of the atmospheric circulation in this season is the most prevalent. Precipitation amounts in Budapest display a decreasing trend in accordance with the decrease in the occurrence of the automated cyclonic types. In contrast, the occurrence of the empirical cyclonic types displays an increasing trend. There occur types in a given classification that are usually accompanied by high ratios of certain types in the other classification.

  5. Neighborhood Hypergraph Based Classification Algorithm for Incomplete Information System

    Feng Hu

    2015-01-01

    Full Text Available The problem of classification in incomplete information system is a hot issue in intelligent information processing. Hypergraph is a new intelligent method for machine learning. However, it is hard to process the incomplete information system by the traditional hypergraph, which is due to two reasons: (1 the hyperedges are generated randomly in traditional hypergraph model; (2 the existing methods are unsuitable to deal with incomplete information system, for the sake of missing values in incomplete information system. In this paper, we propose a novel classification algorithm for incomplete information system based on hypergraph model and rough set theory. Firstly, we initialize the hypergraph. Second, we classify the training set by neighborhood hypergraph. Third, under the guidance of rough set, we replace the poor hyperedges. After that, we can obtain a good classifier. The proposed approach is tested on 15 data sets from UCI machine learning repository. Furthermore, it is compared with some existing methods, such as C4.5, SVM, NavieBayes, and KNN. The experimental results show that the proposed algorithm has better performance via Precision, Recall, AUC, and F-measure.

  6. Classification-based comparison of pre-processing methods for interpretation of mass spectrometry generated clinical datasets

    Hoefsloot Huub CJ

    2009-05-01

    Full Text Available Abstract Background Mass spectrometry is increasingly being used to discover proteins or protein profiles associated with disease. Experimental design of mass-spectrometry studies has come under close scrutiny and the importance of strict protocols for sample collection is now understood. However, the question of how best to process the large quantities of data generated is still unanswered. Main challenges for the analysis are the choice of proper pre-processing and classification methods. While these two issues have been investigated in isolation, we propose to use the classification of patient samples as a clinically relevant benchmark for the evaluation of pre-processing methods. Results Two in-house generated clinical SELDI-TOF MS datasets are used in this study as an example of high throughput mass-spectrometry data. We perform a systematic comparison of two commonly used pre-processing methods as implemented in Ciphergen ProteinChip Software and in the Cromwell package. With respect to reproducibility, Ciphergen and Cromwell pre-processing are largely comparable. We find that the overlap between peaks detected by either Ciphergen ProteinChip Software or Cromwell is large. This is especially the case for the more stringent peak detection settings. Moreover, similarity of the estimated intensities between matched peaks is high. We evaluate the pre-processing methods using five different classification methods. Classification is done in a double cross-validation protocol using repeated random sampling to obtain an unbiased estimate of classification accuracy. No pre-processing method significantly outperforms the other for all peak detection settings evaluated. Conclusion We use classification of patient samples as a clinically relevant benchmark for the evaluation of pre-processing methods. Both pre-processing methods lead to similar classification results on an ovarian cancer and a Gaucher disease dataset. However, the settings for pre

  7. [New International Classification of Chronic Pancreatitis (M-ANNHEIM multifactor classification system, 2007): principles, merits, and demerits].

    Tsimmerman, Ia S

    2008-01-01

    The new International Classification of Chronic Pancreatitis (designated as M-ANNHEIM) proposed by a group of German specialists in late 2007 is reviewed. All its sections are subjected to analysis (risk group categories, clinical stages and phases, variants of clinical course, diagnostic criteria for "established" and "suspected" pancreatitis, instrumental methods and functional tests used in the diagnosis, evaluation of the severity of the disease using a scoring system, stages of elimination of pain syndrome). The new classification is compared with the earlier classification proposed by the author. Its merits and demerits are discussed.

  8. The influence of spine surgeons' experience on the classification and intraobserver reliability of the novel AOSpine thoracolumbar spine injury classification system : an international study

    Sadiqi, Said; Oner, F. Cumhur; Dvorak, Marcel F.; Aarabi, Bizhan; Schroeder, Gregory D.; Vaccaro, Alexander R.

    2015-01-01

    Study Design. International validation study. Objective. To investigate the influence of the spine surgeons' level of experience on the intraobserver reliability of the novel AOSpine Thoracolumbar Spine Injury Classification system, and the appropriate classification according to this system.

  9. 42 CFR 412.10 - Changes in the DRG classification system.

    2010-10-01

    ... 42 Public Health 2 2010-10-01 2010-10-01 false Changes in the DRG classification system. 412.10... § 412.10 Changes in the DRG classification system. (a) General rule. CMS issues changes in the DRG... after the same date the payment rates are effective. (b) Basis for changes in the DRG classification...

  10. Classification of time series patterns from complex dynamic systems

    Schryver, J.C.; Rao, N.

    1998-07-01

    An increasing availability of high-performance computing and data storage media at decreasing cost is making possible the proliferation of large-scale numerical databases and data warehouses. Numeric warehousing enterprises on the order of hundreds of gigabytes to terabytes are a reality in many fields such as finance, retail sales, process systems monitoring, biomedical monitoring, surveillance and transportation. Large-scale databases are becoming more accessible to larger user communities through the internet, web-based applications and database connectivity. Consequently, most researchers now have access to a variety of massive datasets. This trend will probably only continue to grow over the next several years. Unfortunately, the availability of integrated tools to explore, analyze and understand the data warehoused in these archives is lagging far behind the ability to gain access to the same data. In particular, locating and identifying patterns of interest in numerical time series data is an increasingly important problem for which there are few available techniques. Temporal pattern recognition poses many interesting problems in classification, segmentation, prediction, diagnosis and anomaly detection. This research focuses on the problem of classification or characterization of numerical time series data. Highway vehicles and their drivers are examples of complex dynamic systems (CDS) which are being used by transportation agencies for field testing to generate large-scale time series datasets. Tools for effective analysis of numerical time series in databases generated by highway vehicle systems are not yet available, or have not been adapted to the target problem domain. However, analysis tools from similar domains may be adapted to the problem of classification of numerical time series data.

  11. Identification of aerosol types over an urban site based on air-mass trajectory classification

    Pawar, G. V.; Devara, P. C. S.; Aher, G. R.

    2015-10-01

    Columnar aerosol properties retrieved from MICROTOPS II Sun Photometer measurements during 2010-2013 over Pune (18°32‧N; 73°49‧E, 559 m amsl), a tropical urban station in India, are analyzed to identify aerosol types in the atmospheric column. Identification/classification is carried out on the basis of dominant airflow patterns, and the method of discrimination of aerosol types on the basis of relation between aerosol optical depth (AOD500 nm) and Ångström exponent (AE, α). Five potential advection pathways viz., NW/N, SW/S, N, SE/E and L have been identified over the observing site by employing the NOAA-HYSPLIT air mass back trajectory analysis. Based on AE against AOD500 nm scatter plot and advection pathways followed five major aerosol types viz., continental average (CA), marine continental average (MCA), urban/industrial and biomass burning (UB), desert dust (DD) and indeterminate or mixed type (MT) have been identified. In winter, sector SE/E, a representative of air masses traversed over Bay of Bengal and Eastern continental Indian region has relatively small AOD (τpλ = 0.43 ± 0.13) and high AE (α = 1.19 ± 0.15). These values imply the presence of accumulation/sub-micron size anthropogenic aerosols. During pre-monsoon, aerosols from the NW/N sector have high AOD (τpλ = 0.61 ± 0.21), and low AE (α = 0.54 ± 0.14) indicating an increase in the loading of coarse-mode particles over Pune. Dominance of UB type in winter season for all the years (i.e. 2010-2013) may be attributed to both local/transported aerosols. During pre-monsoon seasons, MT is the dominant aerosol type followed by UB and DD, while the background aerosols are insignificant.

  12. A scale space approach for unsupervised feature selection in mass spectra classification for ovarian cancer detection.

    Ceccarelli, Michele; d'Acierno, Antonio; Facchiano, Angelo

    2009-10-15

    Mass spectrometry spectra, widely used in proteomics studies as a screening tool for protein profiling and to detect discriminatory signals, are high dimensional data. A large number of local maxima (a.k.a. peaks) have to be analyzed as part of computational pipelines aimed at the realization of efficient predictive and screening protocols. With this kind of data dimensions and samples size the risk of over-fitting and selection bias is pervasive. Therefore the development of bio-informatics methods based on unsupervised feature extraction can lead to general tools which can be applied to several fields of predictive proteomics. We propose a method for feature selection and extraction grounded on the theory of multi-scale spaces for high resolution spectra derived from analysis of serum. Then we use support vector machines for classification. In particular we use a database containing 216 samples spectra divided in 115 cancer and 91 control samples. The overall accuracy averaged over a large cross validation study is 98.18. The area under the ROC curve of the best selected model is 0.9962. We improved previous known results on the problem on the same data, with the advantage that the proposed method has an unsupervised feature selection phase. All the developed code, as MATLAB scripts, can be downloaded from http://medeaserver.isa.cnr.it/dacierno/spectracode.htm.

  13. Fault Tolerant Neural Network for ECG Signal Classification Systems

    MERAH, M.

    2011-08-01

    Full Text Available The aim of this paper is to apply a new robust hardware Artificial Neural Network (ANN for ECG classification systems. This ANN includes a penalization criterion which makes the performances in terms of robustness. Specifically, in this method, the ANN weights are normalized using the auto-prune method. Simulations performed on the MIT ? BIH ECG signals, have shown that significant robustness improvements are obtained regarding potential hardware artificial neuron failures. Moreover, we show that the proposed design achieves better generalization performances, compared to the standard back-propagation algorithm.

  14. Classification analysis of organization factors related to system safety

    Liu Huizhen; Zhang Li; Zhang Yuling; Guan Shihua

    2009-01-01

    This paper analyzes the different types of organization factors which influence the system safety. The organization factor can be divided into the interior organization factor and exterior organization factor. The latter includes the factors of political, economical, technical, law, social culture and geographical, and the relationships among different interest groups. The former includes organization culture, communication, decision, training, process, supervision and management and organization structure. This paper focuses on the description of the organization factors. The classification analysis of the organization factors is the early work of quantitative analysis. (authors)

  15. A complete electrical hazard classification system and its application

    Gordon, Lloyd B [Los Alamos National Laboratory; Cartelli, Laura [Los Alamos National Laboratory

    2009-01-01

    The Standard for Electrical Safety in the Workplace, NFPA 70E, and relevant OSHA electrical safety standards evolved to address the hazards of 60-Hz power that are faced primarily by electricians, linemen, and others performing facility and utility work. This leaves a substantial gap in the management of electrical hazards in Research and Development (R&D) and specialized high voltage and high power equipment. Examples include lasers, accelerators, capacitor banks, electroplating systems, induction and dielectric heating systems, etc. Although all such systems are fed by 50/60 Hz alternating current (ac) power, we find substantial use of direct current (dc) electrical energy, and the use of capacitors, inductors, batteries, and radiofrequency (RF) power. The electrical hazards of these forms of electricity and their systems are different than for 50160 Hz power. Over the past 10 years there has been an effort to develop a method of classifying all of the electrical hazards found in all types of R&D and utilization equipment. Examples of the variation of these hazards from NFPA 70E include (a) high voltage can be harmless, if the available current is sufficiently low, (b) low voltage can be harmful if the available current/power is high, (c) high voltage capacitor hazards are unique and include severe reflex action, affects on the heart, and tissue damage, and (d) arc flash hazard analysis for dc and capacitor systems are not provided in existing standards. This work has led to a comprehensive electrical hazard classification system that is based on various research conducted over the past 100 years, on analysis of such systems in R&D, and on decades of experience. Initially, national electrical safety codes required the qualified worker only to know the source voltage to determine the shock hazard. Later, as arc flash hazards were understood, the fault current and clearing time were needed. These items are still insufficient to fully characterize all types of

  16. Proposal of rock mass behavior classification based on convergence measurement in shaft sinking through sedimentary soft rocks

    Tsusaka, Kimikazu

    2010-01-01

    Japan Atomic Energy Agency has been excavating deep shafts through sedimentary soft rocks in Horonobe, Hokkaido. From the viewpoint of the observational construction, site engineers need a practical guide to evaluate the field measurements conducted with shaft sinking. The author analyzed the relationship among initial deformation rate, observed deformation, the ratio of the modulus of elasticity of rock mass to the initial stress, and the magnitude of inelastic behavior of rock based on convergence measurements and investigation of rock mass properties on shaft walls. As a result, the rock mass behavior classification for shaft sinking which consists of three classes was proposed. (author)

  17. Intra- and Interobserver Reliability of Three Classification Systems for Hallux Rigidus.

    Dillard, Sarita; Schilero, Christina; Chiang, Sharon; Pham, Peter

    2018-04-18

    There are over ten classification systems currently used in the staging of hallux rigidus. This results in confusion and inconsistency with radiographic interpretation and treatment. The reliability of hallux rigidus classification systems has not yet been tested. The purpose of this study was to evaluate intra- and interobserver reliability using three commonly used classifications for hallux rigidus. Twenty-one plain radiograph sets were presented to ten ACFAS board-certified foot and ankle surgeons. Each physician classified each radiograph based on clinical experience and knowledge according to the Regnauld, Roukis, and Hattrup and Johnson classification systems. The two-way mixed single-measure consistency intraclass correlation was used to calculate intra- and interrater reliability. The intrarater reliability of individual sets for the Roukis and Hattrup and Johnson classification systems was "fair to good" (Roukis, 0.62±0.19; Hattrup and Johnson, 0.62±0.28), whereas the intrarater reliability of individual sets for the Regnauld system bordered between "fair to good" and "poor" (0.43±0.24). The interrater reliability of the mean classification was "excellent" for all three classification systems. Conclusions Reliable and reproducible classification systems are essential for treatment and prognostic implications in hallux rigidus. In our study, Roukis classification system had the best intrarater reliability. Although there are various classification systems for hallux rigidus, our results indicate that all three of these classification systems show reliability and reproducibility.

  18. Classification of mass and normal breast tissue: A convolution neural network classifier with spatial domain and texture images

    Sahiner, B.; Chan, H.P.; Petrick, N.; Helvie, M.A.; Adler, D.D.; Goodsitt, M.M.; Wei, D.

    1996-01-01

    The authors investigated the classification of regions of interest (ROI's) on mammograms as either mass or normal tissue using a convolution neural network (CNN). A CNN is a back-propagation neural network with two-dimensional (2-D) weight kernels that operate on images. A generalized, fast and stable implementation of the CNN was developed. The input images to the CNN were obtained form the ROI's using two techniques. The first technique employed averaging and subsampling. The second technique employed texture feature extraction methods applied to small subregions inside the ROI. Features computed over different subregions were arranged as texture images, which were subsequently used as CNN inputs. The effects of CNN architecture and texture feature parameters on classification accuracy were studied. Receiver operating characteristic (ROC) methodology was used to evaluate the classification accuracy. A data set consisting of 168 ROI's containing biopsy-proven masses and 504 ROI's containing normal breast tissue was extracted from 168 mammograms by radiologists experienced in mammography. This data set was used for training and testing the CNN. With the best combination of CNN architecture and texture feature parameters, the area under the test ROC curve reached 0.87, which corresponded to a true-positive fraction of 90% at a false positive fraction of 31%. The results demonstrate the feasibility of using a CNN for classification of masses and normal tissue on mammograms

  19. Online mass storage system detailed requirements document

    1976-01-01

    The requirements for an online high density magnetic tape data storage system that can be implemented in a multipurpose, multihost environment is set forth. The objective of the mass storage system is to provide a facility for the compact storage of large quantities of data and to make this data accessible to computer systems with minimum operator handling. The results of a market survey and analysis of candidate vendor who presently market high density tape data storage systems are included.

  20. Comparison of Computational Algorithms for the Classification of Liver Cancer using SELDI Mass Spectrometry: A Case Study

    Robert J Hickey

    2007-01-01

    Full Text Available Introduction: As an alternative to DNA microarrays, mass spectrometry based analysis of proteomic patterns has shown great potential in cancer diagnosis. The ultimate application of this technique in clinical settings relies on the advancement of the technology itself and the maturity of the computational tools used to analyze the data. A number of computational algorithms constructed on different principles are available for the classification of disease status based on proteomic patterns. Nevertheless, few studies have addressed the difference in the performance of these approaches. In this report, we describe a comparative case study on the classification accuracy of hepatocellular carcinoma based on the serum proteomic pattern generated from a Surface Enhanced Laser Desorption/Ionization (SELDI mass spectrometer.Methods: Nine supervised classifi cation algorithms are implemented in R software and compared for the classification accuracy.Results: We found that the support vector machine with radial function is preferable as a tool for classification of hepatocellular carcinoma using features in SELDI mass spectra. Among the rest of the methods, random forest and prediction analysis of microarrays have better performance. A permutation-based technique reveals that the support vector machine with a radial function seems intrinsically superior in learning from the training data since it has a lower prediction error than others when there is essentially no differential signal. On the other hand, the performance of the random forest and prediction analysis of microarrays rely on their capability of capturing the signals with substantial differentiation between groups.Conclusions: Our finding is similar to a previous study, where classification methods based on the Matrix Assisted Laser Desorption/Ionization (MALDI mass spectrometry are compared for the prediction accuracy of ovarian cancer. The support vector machine, random forest and prediction

  1. The reliability and validity of the Saliba Postural Classification System.

    Collins, Cristiana Kahl; Johnson, Vicky Saliba; Godwin, Ellen M; Pappas, Evangelos

    2016-07-01

    To determine the reliability and validity of the Saliba Postural Classification System (SPCS). Two physical therapists classified pictures of 100 volunteer participants standing in their habitual posture for inter and intra-tester reliability. For validity, 54 participants stood on a force plate in a habitual and a corrected posture, while a vertical force was applied through the shoulders until the clinician felt a postural give. Data were extracted at the time the give was felt and at a time in the corrected posture that matched the peak vertical ground reaction force (VGRF) in the habitual posture. Inter-tester reliability demonstrated 75% agreement with a Kappa = 0.64 (95% CI = 0.524-0.756, SE = 0.059). Intra-tester reliability demonstrated 87% agreement with a Kappa = 0.8, (95% CI = 0.702-0.898, SE = 0.05) and 80% agreement with a Kappa = 0.706, (95% CI = 0.594-0818, SE = 0.057). The examiner applied a significantly higher (p < 0.001) peak vertical force in the corrected posture prior to a postural give when compared to the habitual posture. Within the corrected posture, the %VGRF was higher when the test was ongoing vs. when a postural give was felt (p < 0.001). The %VGRF was not different between the two postures when comparing the peaks (p = 0.214). The SPCS has substantial agreement for inter- and intra-tester reliability and is largely a valid postural classification system as determined by the larger vertical forces in the corrected postures. Further studies on the correlation between the SPCS and diagnostic classifications are indicated.

  2. Light-water reactors reference system classification for the European reliability data system (ERDS)

    Melis, M.; Mancini, G.

    1982-01-01

    The reference system classification represents a basic stage in the organization of the European reliability data system (ERDS) for light-water reactors, a project actually in development at the Joint Research Centre, Ispra. This project is concerned with operational reliability data collection from the various ''national'' data banks, and centralization in a European reliability data system, so improving the significance of the resulting reliability evaluations. In the framework of the ERDS project, the reference system classification provides a LWR functional break-down and represents a plant-unique identification in the process of homogenization of event-data coming from the various ''national'' organizations. The report, after a brief description of the main objectives of the ERDS project, reviews the criteria followed in the elaboration of the reference system classification; then the detailed classification is presented. The nuclear power station is subdivided in about 180 systems. To each system a sheet is associated, containing: a comprehensive description of system-functions and boundaries; a descritpion of the plant operating mode, linked to the various system functions; a list of the main interface system; and finally, a list of the main components, including type and safety classification

  3. Changing tides: increasing evidence to embrace a patient classification system.

    Malloch, Kathy

    2012-01-01

    The effective use of a patient classification system (PCS) in a way that provides value to all health care organizations has yet to be realized given the challenging developmental pathway of these systems. As the science and technology of workforce management emerges along with evidence to support the relationships between nurse work and patient care needs, it is no longer appropriate to rely on systems that provide aggregated and minimal data to address the need for safer patient care and retention of nurses. Specificity about patient care needs in a valid and reliable PCS is essential on our pathway to improved resource utilization, improved decision making, integration of nurse cognitive and knowledge work, and management of variances from planned resource use. Advancements with technology, the ability to create and monitor equitable nurse-patient assignments, conceptual clarity, evidence, regulatory requirements, and professional role development point to a new receptiveness for PCSs.

  4. DNA methylation-based classification of central nervous system tumours

    Capper, David; Jones, David T.W.; Sill, Martin

    2018-01-01

    Accurate pathological diagnosis is crucial for optimal management of patients with cancer. For the approximately 100 known tumour types of the central nervous system, standardization of the diagnostic process has been shown to be particularly challenging - with substantial inter-observer variabil......Accurate pathological diagnosis is crucial for optimal management of patients with cancer. For the approximately 100 known tumour types of the central nervous system, standardization of the diagnostic process has been shown to be particularly challenging - with substantial inter......-observer variability in the histopathological diagnosis of many tumour types. Here we present a comprehensive approach for the DNA methylation-based classification of central nervous system tumours across all entities and age groups, and demonstrate its application in a routine diagnostic setting. We show...

  5. A data-stream classification system for investigating terrorist threats

    Schulz, Alexia; Dettman, Joshua; Gottschalk, Jeffrey; Kotson, Michael; Vuksani, Era; Yu, Tamara

    2016-05-01

    The role of cyber forensics in criminal investigations has greatly increased in recent years due to the wealth of data that is collected and available to investigators. Physical forensics has also experienced a data volume and fidelity revolution due to advances in methods for DNA and trace evidence analysis. Key to extracting insight is the ability to correlate across multi-modal data, which depends critically on identifying a touch-point connecting the separate data streams. Separate data sources may be connected because they refer to the same individual, entity or event. In this paper we present a data source classification system tailored to facilitate the investigation of potential terrorist activity. This taxonomy is structured to illuminate the defining characteristics of a particular terrorist effort and designed to guide reporting to decision makers that is complete, concise, and evidence-based. The classification system has been validated and empirically utilized in the forensic analysis of a simulated terrorist activity. Next-generation analysts can use this schema to label and correlate across existing data streams, assess which critical information may be missing from the data, and identify options for collecting additional data streams to fill information gaps.

  6. Gender and cultural issues in psychiatric nosological classification systems.

    van de Water, Tanya; Suliman, Sharain; Seedat, Soraya

    2016-08-01

    Much has changed since the two dominant mental health nosological systems, the International Classification of Diseases (ICD) and the Diagnostic and Statistical Manual of Mental Disorders (DSM), were first published in 1900 and 1952, respectively. Despite numerous modifications to stay up to date with scientific and cultural changes (eg, exclusion of homosexuality as a disorder) and to improve the cultural sensitivity of psychiatric diagnoses, the ICD and DSM have only recently renewed attempts at harmonization. Previous nosological iterations demonstrate the oscillation in the importance placed on the biological focus, highlighting the tension between a gender- and culture-free nosology (solely biological) and a contextually relevant understanding of mental illness. In light of the release of the DSM 5, future nosological systems, such as the ICD 11, scheduled for release in 2017, and the Research Development Criteria (RDoC), can learn from history and apply critiques. This article aims to critically consider gender and culture in previous editions of the ICD and DSM to inform forthcoming classifications.

  7. Rapid hyperspectral image classification to enable autonomous search systems

    Raj Bridgelal

    2016-11-01

    Full Text Available The emergence of lightweight full-frame hyperspectral cameras is destined to enable autonomous search vehicles in the air, on the ground and in water. Self-contained and long-endurance systems will yield important new applications, for example, in emergency response and the timely identification of environmental hazards. One missing capability is rapid classification of hyperspectral scenes so that search vehicles can immediately take actions to verify potential targets. Onsite verifications minimise false positives and preclude the expense of repeat missions. Verifications will require enhanced image quality, which is achievable by either moving closer to the potential target or by adjusting the optical system. Such a solution, however, is currently impractical for small mobile platforms with finite energy sources. Rapid classifications with current methods demand large computing capacity that will quickly deplete the on-board battery or fuel. To develop the missing capability, the authors propose a low-complexity hyperspectral image classifier that approaches the performance of prevalent classifiers. This research determines that the new method will require at least 19-fold less computing capacity than the prevalent classifier. To assess relative performances, the authors developed a benchmark that compares a statistic of library endmember separability in their respective feature spaces.

  8. Tangata whaiora/consumers perspectives on current psychiatric classification systems

    Wells Debra

    2008-06-01

    Full Text Available Abstract Background A number of studies have been undertaken with the aim of considering the utility of mental health classification systems from the perspective of a variety of stakeholders. There is a lack of research on how useful consumers/tangata whaiora think these are in assisting them in their recovery. Methods Seventy service users were involved in seven focus groups in order to consider this question. Results and discussion While for clinicians diagnosing someone might be a discrete event and easily forgotten as a moment in a busy schedule, most people in this study remembered the occasion and aftermath very clearly. The overall consensus was that whether being 'diagnosed' was helpful or not, in large part, depended on how the process happened and what resulted from being 'labeled' in the person's life. Conclusion Overall, people thought that in terms of their recovery, the classification systems were tools and their utility depended on how they were used. They suggested that whatever tool was used it needed to help them make sense of their distress and provide them with a variety of supports, not just medication, to assist them to live lives that were meaningful to them.

  9. A Game Player Expertise Level Classification System Using Electroencephalography (EEG

    Syed Muhammad Anwar

    2017-12-01

    Full Text Available The success and wider adaptability of smart phones has given a new dimension to the gaming industry. Due to the wide spectrum of video games, the success of a particular game depends on how efficiently it is able to capture the end users’ attention. This leads to the need to analyse the cognitive aspects of the end user, that is the game player, during game play. A direct window to see how an end user responds to a stimuli is to look at their brain activity. In this study, electroencephalography (EEG is used to record human brain activity during game play. A commercially available EEG headset is used for this purpose giving fourteen channels of recorded EEG brain activity. The aim is to classify a player as expert or novice using the brain activity as the player indulges in the game play. Three different machine learning classifiers have been used to train and test the system. Among the classifiers, naive Bayes has outperformed others with an accuracy of 88 % , when data from all fourteen EEG channels are used. Furthermore, the activity observed on electrodes is statistically analysed and mapped for brain visualizations. The analysis has shown that out of the available fourteen channels, only four channels in the frontal and occipital brain regions show significant activity. Features of these four channels are then used, and the performance parameters of the four-channel classification are compared to the results of the fourteen-channel classification. It has been observed that support vector machine and the naive Bayes give good classification accuracy and processing time, well suited for real-time applications.

  10. On safety classification of instrumentation and control systems and their components

    Yastrebenetskij, M.A.; Rozen, Yu.V.

    2004-01-01

    Safety classification of instrumentation and control systems (I and C) and their components (hardware, software, software-hardware complexes) is described: - evaluation of classification principles and criteria in Ukrainian standards and rules; comparison between Ukrainian and international principles and criteria; possibility and ways of coordination of Ukrainian and international standards related to (I and C) safety classification

  11. Development of a comprehensive radioactive waste classification system

    Smith, C.F.; Cohen, J.J.

    1989-01-01

    Several previous studies have been conducted with the intent of developing a rational system for classification of radioactive wastes. Although none of the proposed systems has gained general acceptance, certain waste classes, specifically high-level waste and low-level waste suitable for shallow land burial have been essentially defined by regulation. Wastes which remain undefined include: those intermediate level wastes which require more restrictive controls than that provided by shallow land burial but not the high degree of isolation needed for high level wastes, and wastes below regulatory concern (BRC) which entail so low a radiological risk that they can be managed according to their nonradiological properties. This study has developed a framework within which the complete spectrum of radioactive wastes can be defined

  12. Assessment of respiratory muscle strength in children according to the classification of body mass index

    George Jung da Rosa

    2014-06-01

    Full Text Available OBJECTIVE: To assess and compare the respiratory muscle strength among eutrophic, overweight and obese school children, as well as to identify anthropometric and respiratory variables related to the results.METHODS: Cross-sectional survey with healthy schoolchildren aged 7-9 years old, divided into three groups: Normal weight, Overweight and Obese. The International Study of Asthma and Allergies in Childhood (ISAAC questionnaire was applied. The body mass index (BMI was evaluated, as well as the forced expiratory volume in one second (FEV1 with a portable digital device. The maximal inspiratory and expiratory pressures (MIP and MEP were measured by a digital manometer. Comparisons between the groups were made by Kruskal-Wallis test. Spearman's correlation coefficient was used to analyze the correlations among the variables.RESULTS: MIP of eutrophic school children was higher than MIP found in overweight (p=0.043 and obese (p=0.013 children. MIP was correlated with BMI percentile and weight classification (r=-0.214 and r=-0.256 and MEP was correlated with height (r=0.328. Both pressures showed strong correlation with each other in all analyses (r≥0.773, and less correlation with FEV1 (MIP - r=0.362 and MEP - r=0.494. FEV1 correlated with MEP in all groups (r: 0.429 - 0.569 and with MIP in Obese Group (r=0.565. Age was correlated with FEV1 (r=0.578, MIP (r=0.281 and MEP (r=0.328.CONCLUSIONS: Overweight and obese children showed lower MIP values, compared to eutrophic ones. The findings point to the influence of anthropometric variables on respiratory muscle strength in children.

  13. A space-based classification system for RF transients

    Moore, K.R.; Call, D.; Johnson, S.; Payne, T.; Ford, W.; Spencer, K.; Wilkerson, J.F.; Baumgart, C.

    1993-01-01

    The FORTE (Fast On-Orbit Recording of Transient Events) small satellite is scheduled for launch in mid 1995. The mission is to measure and classify VHF (30--300 MHz) electromagnetic pulses, primarily due to lightning, within a high noise environment dominated by continuous wave carriers such as TV and FM stations. The FORTE Event Classifier will use specialized hardware to implement signal processing and neural network algorithms that perform onboard classification of RF transients and carriers. Lightning events will also be characterized with optical data telemetered to the ground. A primary mission science goal is to develop a comprehensive understanding of the correlation between the optical flash and the VHF emissions from lightning. By combining FORTE measurements with ground measurements and/or active transmitters, other science issues can be addressed. Examples include the correlation of global precipitation rates with lightning flash rates and location, the effects of large scale structures within the ionosphere (such as traveling ionospheric disturbances and horizontal gradients in the total electron content) on the propagation of broad bandwidth RF signals, and various areas of lightning physics. Event classification is a key feature of the FORTE mission. Neural networks are promising candidates for this application. The authors describe the proposed FORTE Event Classifier flight system, which consists of a commercially available digital signal processing board and a custom board, and discuss work on signal processing and neural network algorithms

  14. Body mass index: different nutritional status according to WHO, OPAS and Lipschitz classifications in gastrointestinal cancer patients.

    Barao, Katia; Forones, Nora Manoukian

    2012-01-01

    The body mass index (BMI) is the most common marker used on diagnoses of the nutritional status. The great advantage of this index is the easy way to measure, the low cost, the good correlation with the fat mass and the association to morbidity and mortality. To compare the BMI differences according to the WHO, OPAS and Lipschitz classification. A prospective study on 352 patients with esophageal, gastric or colorectal cancer was done. The BMI was calculated and analyzed by the classification of WHO, Lipschitz and OPAS. The mean age was 62.1 ± 12.4 years and 59% of them had more than 59 years. The BMI had not difference between the genders in patients cancer had more than 65 years. A different cut off must be used for this patients, because undernourished patients may be wrongly considered well nourished.

  15. Pathohistological classification systems in gastric cancer: diagnostic relevance and prognostic value.

    Berlth, Felix; Bollschweiler, Elfriede; Drebber, Uta; Hoelscher, Arnulf H; Moenig, Stefan

    2014-05-21

    Several pathohistological classification systems exist for the diagnosis of gastric cancer. Many studies have investigated the correlation between the pathohistological characteristics in gastric cancer and patient characteristics, disease specific criteria and overall outcome. It is still controversial as to which classification system imparts the most reliable information, and therefore, the choice of system may vary in clinical routine. In addition to the most common classification systems, such as the Laurén and the World Health Organization (WHO) classifications, other authors have tried to characterize and classify gastric cancer based on the microscopic morphology and in reference to the clinical outcome of the patients. In more than 50 years of systematic classification of the pathohistological characteristics of gastric cancer, there is no sole classification system that is consistently used worldwide in diagnostics and research. However, several national guidelines for the treatment of gastric cancer refer to the Laurén or the WHO classifications regarding therapeutic decision-making, which underlines the importance of a reliable classification system for gastric cancer. The latest results from gastric cancer studies indicate that it might be useful to integrate DNA- and RNA-based features of gastric cancer into the classification systems to establish prognostic relevance. This article reviews the diagnostic relevance and the prognostic value of different pathohistological classification systems in gastric cancer.

  16. Computerized mass spectrometer data system at LLL

    Friesen, R.D.; Dupzyk, R.J.

    1976-01-01

    The data systems on the three mass spectrometers at LLL are computer-controlled, pulse-counting systems synchronized to a repeatedly swept magnetic field. The data are accumulated in the memory of the computer or in a Nuclear Data ND 180 in a multi-scaler mode of operation. This mode of data acquisition allows a continuous check of the background stability and makes tune-up easier. But the main benefit is a reduction in the required ion emission rate stability. By the use of standards to set the system dead time, we have been able to utilize the sensitivity of a pulse counting system without the expense of exotic equipment

  17. Mass spectrometer data system at LLL

    Friesen, R.D.

    1975-01-01

    The data systems on the three mass spectrometers at LLL are computer-controlled, pulse-counting systems synchronized to a repeatedly-swept magnetic field. The data are accumulated in the memory of the computer or in a Nuclear Data ND 180 in a multi-scaler mode of operation. This mode of sweeping allows a continuous check of the background stability and makes tune-up easier. But the main benefit is a reduction in the required ion emission rate stability. By the use of standards to set the system dead time, we have been able to utilize the sensitivity of a pulse counting system without the expense of exotic equipment

  18. Risk classification and uncertainty propagation for virtual water distribution systems

    Torres, Jacob M.; Brumbelow, Kelly; Guikema, Seth D.

    2009-01-01

    While the secrecy of real water distribution system data is crucial, it poses difficulty for research as results cannot be publicized. This data includes topological layouts of pipe networks, pump operation schedules, and water demands. Therefore, a library of virtual water distribution systems can be an important research tool for comparative development of analytical methods. A virtual city, 'Micropolis', has been developed, including a comprehensive water distribution system, as a first entry into such a library. This virtual city of 5000 residents is fully described in both geographic information systems (GIS) and EPANet hydraulic model frameworks. A risk classification scheme and Monte Carlo analysis are employed for an attempted water supply contamination attack. Model inputs to be considered include uncertainties in: daily water demand, seasonal demand, initial storage tank levels, the time of day a contamination event is initiated, duration of contamination event, and contaminant quantity. Findings show that reasonable uncertainties in model inputs produce high variability in exposure levels. It is also shown that exposure level distributions experience noticeable sensitivities to population clusters within the contaminant spread area. High uncertainties in exposure patterns lead to greater resources needed for more effective mitigation strategies.

  19. From fault classification to fault tolerance for multi-agent systems

    Potiron, Katia; Taillibert, Patrick

    2013-01-01

    Faults are a concern for Multi-Agent Systems (MAS) designers, especially if the MAS are built for industrial or military use because there must be some guarantee of dependability. Some fault classification exists for classical systems, and is used to define faults. When dependability is at stake, such fault classification may be used from the beginning of the system's conception to define fault classes and specify which types of faults are expected. Thus, one may want to use fault classification for MAS; however, From Fault Classification to Fault Tolerance for Multi-Agent Systems argues that

  20. Classification Systems, their Digitization and Consequences for Data-Driven Decision Making

    Stein, Mari-Klara; Newell, Sue; Galliers, Robert D.

    2013-01-01

    Classification systems are foundational in many standardized software tools. This digitization of classification systems gives them a new ‘materiality’ that, jointly with the social practices of information producers/consumers, has significant consequences on the representational quality of such ...... and the foundational role of representational quality in understanding the success and consequences of data-driven decision-making.......-narration and meta-narration), and three different information production/consumption situations. We contribute to the relational theorization of representational quality and extend classification systems research by drawing explicit attention to the importance of ‘materialization’ of classification systems...

  1. Nuclear molecular structure in heavy mass systems

    Arctaedius, T.; Bargholtz, C.

    1989-04-01

    A study is made of nuclear molecular configurations involving one heavy mass partner. The stability of these configurations to mass flow and to fission is investigated as well as their population in fusion reactions. It is concluded that shell effects in combination with the effects of angular momentum may be important in stabilizing certain configurations. A possible relation of these configurations to the so called superdeformed states is pointed out. The spectrum of rotational and vibrational trasitions within molecular configurations is investigated. For sufficiently mass-asymmetric systems the engergies of vibrational transitions are comparable to the neutron separation energy. Gamma radiation from such transitions may then be observable above the background of statistical transitions. The gamma spectrum and the directional distribution of the radioation following fusion reactions with 12 C and 16 O are calculated. (authors)

  2. Classification systems in nursing : Formalizing nursing knowledge and implications for nursing information systems

    Goossen, WTF; Epping, PJMM; Abraham, IL

    The development of nursing information systems (NIS) is often hampered by the fact that nursing lacks a unified nursing terminology and classification system. Currently there exist various initiatives in this area. We address the question as to how current initiatives in the development of nursing

  3. New classification system-based visual outcome in Eales′ disease

    Saxena Sandeep

    2007-01-01

    Full Text Available Purpose: A retrospective tertiary care center-based study was undertaken to evaluate the visual outcome in Eales′ disease, based on a new classification system, for the first time. Materials and Methods: One hundred and fifty-nine consecutive cases of Eales′ disease were included. All the eyes were staged according to the new classification: Stage 1: periphlebitis of small (1a and large (1b caliber vessels with superficial retinal hemorrhages; Stage 2a: capillary non-perfusion, 2b: neovascularization elsewhere/of the disc; Stage 3a: fibrovascular proliferation, 3b: vitreous hemorrhage; Stage 4a: traction/combined rhegmatogenous retinal detachment and 4b: rubeosis iridis, neovascular glaucoma, complicated cataract and optic atrophy. Visual acuity was graded as: Grade I 20/20 or better; Grade II 20/30 to 20/40; Grade III 20/60 to 20/120 and Grade IV 20/200 or worse. All the cases were managed by medical therapy, photocoagulation and/or vitreoretinal surgery. Visual acuity was converted into decimal scale, denoting 20/20=1 and 20/800=0.01. Paired t-test / Wilcoxon signed-rank tests were used for statistical analysis. Results: Vitreous hemorrhage was the commonest presenting feature (49.32%. Cases with Stages 1 to 3 and 4a and 4b achieved final visual acuity ranging from 20/15 to 20/40; 20/80 to 20/400 and 20/200 to 20/400, respectively. Statistically significant improvement in visual acuities was observed in all the stages of the disease except Stages 1a and 4b. Conclusion: Significant improvement in visual acuities was observed in the majority of stages of Eales′ disease following treatment. This study adds further to the little available evidences of treatment effects in literature and may have effect on patient care and health policy in Eales′ disease.

  4. Classification of robotic battery service systems for unmanned aerial vehicles

    Ngo Tien

    2018-01-01

    Full Text Available Existing examples of prototypes of ground-based robotic platforms used as a landing site for unmanned aerial vehicles are considered. In some cases, they are equipped with a maintenance mechanism for the power supply module. The main requirements for robotic multi-copter battery maintenance systems depending on operating conditions, required processing speed, operator experience and other parameters are analyzed. The key issues remain questions of the autonomous landing of the unmanned aerial vehicles on the platform and approach to servicing battery. The existing prototypes of service robotic platforms are differed in the complexity of internal mechanisms, speed of service, algorithms of joint work of the platform and unmanned aerial vehicles during the landing and maintenance of the battery. The classification of robotic systems for servicing the power supply of multi-copter batteries criteria is presented using the following: the type of basing, the method of navigation during landing, the shape of the landing pad, the method of restoring the power supply module. The proposed algorithmic model of the operation of battery power maintenance system of the multi-copter on ground-based robotic platform during solving the target agrarian problem is described. Wireless methods of battery recovery are most promising, so further development and prototyping of a wireless charging station for multi-copter batteries will be developed.

  5. Multi-resolution analysis using integrated microscopic configuration with local patterns for benign-malignant mass classification

    Rabidas, Rinku; Midya, Abhishek; Chakraborty, Jayasree; Sadhu, Anup; Arif, Wasim

    2018-02-01

    In this paper, Curvelet based local attributes, Curvelet-Local configuration pattern (C-LCP), is introduced for the characterization of mammographic masses as benign or malignant. Amid different anomalies such as micro- calcification, bilateral asymmetry, architectural distortion, and masses, the reason for targeting the mass lesions is due to their variation in shape, size, and margin which makes the diagnosis a challenging task. Being efficient in classification, multi-resolution property of the Curvelet transform is exploited and local information is extracted from the coefficients of each subband using Local configuration pattern (LCP). The microscopic measures in concatenation with the local textural information provide more discriminating capability than individual. The measures embody the magnitude information along with the pixel-wise relationships among the neighboring pixels. The performance analysis is conducted with 200 mammograms of the DDSM database containing 100 mass cases of each benign and malignant. The optimal set of features is acquired via stepwise logistic regression method and the classification is carried out with Fisher linear discriminant analysis. The best area under the receiver operating characteristic curve and accuracy of 0.95 and 87.55% are achieved with the proposed method, which is further compared with some of the state-of-the-art competing methods.

  6. A new classification method for MALDI imaging mass spectrometry data acquired on formalin-fixed paraffin-embedded tissue samples.

    Boskamp, Tobias; Lachmund, Delf; Oetjen, Janina; Cordero Hernandez, Yovany; Trede, Dennis; Maass, Peter; Casadonte, Rita; Kriegsmann, Jörg; Warth, Arne; Dienemann, Hendrik; Weichert, Wilko; Kriegsmann, Mark

    2017-07-01

    Matrix-assisted laser desorption/ionization imaging mass spectrometry (MALDI IMS) shows a high potential for applications in histopathological diagnosis, and in particular for supporting tumor typing and subtyping. The development of such applications requires the extraction of spectral fingerprints that are relevant for the given tissue and the identification of biomarkers associated with these spectral patterns. We propose a novel data analysis method based on the extraction of characteristic spectral patterns (CSPs) that allow automated generation of classification models for spectral data. Formalin-fixed paraffin embedded (FFPE) tissue samples from N=445 patients assembled on 12 tissue microarrays were analyzed. The method was applied to discriminate primary lung and pancreatic cancer, as well as adenocarcinoma and squamous cell carcinoma of the lung. A classification accuracy of 100% and 82.8%, resp., could be achieved on core level, assessed by cross-validation. The method outperformed the more conventional classification method based on the extraction of individual m/z values in the first application, while achieving a comparable accuracy in the second. LC-MS/MS peptide identification demonstrated that the spectral features present in selected CSPs correspond to peptides relevant for the respective classification. This article is part of a Special Issue entitled: MALDI Imaging, edited by Dr. Corinna Henkel and Prof. Peter Hoffmann. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. Classification of Obesity Varies between Body Mass Index and Direct Measures of Body Fat in Boys and Girls of Asian and European Ancestry

    McConnell-Nzunga, J.; Naylor, P. J.; Macdonald, H.; Rhodes, R. E.; Hofer, S. M.; McKay, H.

    2018-01-01

    Body mass index is a common proxy for proportion of body fat. However, body mass index may not classify youth similarly across ages and ethnicities. We used sex- and ethnic-specific receiver operating characteristic curves to determine how obesity classifications compared between body mass index and dual energy x-ray absorptiometry-based body fat…

  8. Classification of breast masses by ultrasonic Nakagami imaging: a feasibility study

    Tsui, Po-Hsiang; Yeh, Chih-Kuang; Chang, Chien-Cheng; Liao, Yin-Yin

    2008-11-01

    Ultrasound is an important clinical tool in noninvasive diagnoses of breast cancer. The Nakagami statistical parameter estimated from the ultrasonic backscattered envelope has been demonstrated to be useful in complementing conventional B-mode scans when classifying breast masses. However, the shadowing effect caused by certain high-attenuation tumors in the B-mode image makes the tumor contour unclear, and thus it is more difficult to choose an appropriate region of interest from which to collect tumor data for estimating the Nakagami parameter. This study explored the feasibility of using the Nakagami parametric image to overcome the shadowing effect for visualizing the properties of breast masses. Experiments were performed on a breast-mimicking phantom and on some typical clinical cases for cysts, fat and tumors (fibroadenoma) (n = 18) in order to explore the performance of the Nakagami image under ideal and practical conditions. The experimental results showed that the Nakagami image pixels (i.e. the local Nakagami parameter) in the cyst, tumor and fat are 0.21 ± 0.01, 0.65 ± 0.05 and 0.98 ± 0.07, respectively, for six independent phantom measurements, and 0.14 ± 0.03, 0.67 ± 0.11 and 0.89 ± 0.08, respectively, for clinical experiments. This suggests that the Nakagami image is able to classify various breast masses (p < 0.005) although the clinical results from tumors of different cases have a larger variance that may be caused by the complexity of real breast tissues. In particular, unlike the B-mode image, the Nakagami image is not subject to significant shadowing effects, making it useful to complement the B-mode image to describe the tumor contour for identifying the tumor-related region when the shadowing effect is stronger or a low system gain is used.

  9. Classification of breast masses by ultrasonic Nakagami imaging: a feasibility study

    Tsui, P-H; Chang, C-C [Division of Mechanics, Research Center for Applied Sciences, Academia Sinica, 128, Section 2, Academia Road, Nankang, Taipei 11529, Taiwan (China); Yeh, C-K; Liao, Y-Y [Department of Biomedical Engineering and Environmental Sciences, National Tsing Hua University, Hsinchu, Taiwan (China)], E-mail: mechang@gate.sinica.edu.tw, E-mail: ckyeh@mx.nthu.edu.tw

    2008-11-07

    Ultrasound is an important clinical tool in noninvasive diagnoses of breast cancer. The Nakagami statistical parameter estimated from the ultrasonic backscattered envelope has been demonstrated to be useful in complementing conventional B-mode scans when classifying breast masses. However, the shadowing effect caused by certain high-attenuation tumors in the B-mode image makes the tumor contour unclear, and thus it is more difficult to choose an appropriate region of interest from which to collect tumor data for estimating the Nakagami parameter. This study explored the feasibility of using the Nakagami parametric image to overcome the shadowing effect for visualizing the properties of breast masses. Experiments were performed on a breast-mimicking phantom and on some typical clinical cases for cysts, fat and tumors (fibroadenoma) (n = 18) in order to explore the performance of the Nakagami image under ideal and practical conditions. The experimental results showed that the Nakagami image pixels (i.e. the local Nakagami parameter) in the cyst, tumor and fat are 0.21 {+-} 0.01, 0.65 {+-} 0.05 and 0.98 {+-} 0.07, respectively, for six independent phantom measurements, and 0.14 {+-} 0.03, 0.67 {+-} 0.11 and 0.89 {+-} 0.08, respectively, for clinical experiments. This suggests that the Nakagami image is able to classify various breast masses (p < 0.005) although the clinical results from tumors of different cases have a larger variance that may be caused by the complexity of real breast tissues. In particular, unlike the B-mode image, the Nakagami image is not subject to significant shadowing effects, making it useful to complement the B-mode image to describe the tumor contour for identifying the tumor-related region when the shadowing effect is stronger or a low system gain is used.

  10. Asynchronous data-driven classification of weapon systems

    Jin, Xin; Mukherjee, Kushal; Gupta, Shalabh; Ray, Asok; Phoha, Shashi; Damarla, Thyagaraju

    2009-01-01

    This communication addresses real-time weapon classification by analysis of asynchronous acoustic data, collected from microphones on a sensor network. The weapon classification algorithm consists of two parts: (i) feature extraction from time-series data using symbolic dynamic filtering (SDF), and (ii) pattern classification based on the extracted features using the language measure (LM) and support vector machine (SVM). The proposed algorithm has been tested on field data, generated by firing of two types of rifles. The results of analysis demonstrate high accuracy and fast execution of the pattern classification algorithm with low memory requirements. Potential applications include simultaneous shooter localization and weapon classification with soldier-wearable networked sensors. (rapid communication)

  11. An overview of some historical knowledge organisation systems and classifications with a special emphasy on monastery libraries’ classification

    Sonja Svoljšak

    2005-01-01

    Full Text Available The article gives an overview of some most prominent historical turning – points in the field of knowledge organization an2d western European sistematization of science, based on Greek and christian philosophy. Some examples of earlier attempts to unify the systems of knowledge organization and science systematization are presented. Some specific systems of the most prominent European christian religious orders’ library contents arrangement and classification are described in this context.

  12. Planetary mass function and planetary systems

    Dominik, M.

    2011-02-01

    With planets orbiting stars, a planetary mass function should not be seen as a low-mass extension of the stellar mass function, but a proper formalism needs to take care of the fact that the statistical properties of planet populations are linked to the properties of their respective host stars. This can be accounted for by describing planet populations by means of a differential planetary mass-radius-orbit function, which together with the fraction of stars with given properties that are orbited by planets and the stellar mass function allows the derivation of all statistics for any considered sample. These fundamental functions provide a framework for comparing statistics that result from different observing techniques and campaigns which all have their very specific selection procedures and detection efficiencies. Moreover, recent results both from gravitational microlensing campaigns and radial-velocity surveys of stars indicate that planets tend to cluster in systems rather than being the lonely child of their respective parent star. While planetary multiplicity in an observed system becomes obvious with the detection of several planets, its quantitative assessment however comes with the challenge to exclude the presence of further planets. Current exoplanet samples begin to give us first hints at the population statistics, whereas pictures of planet parameter space in its full complexity call for samples that are 2-4 orders of magnitude larger. In order to derive meaningful statistics, however, planet detection campaigns need to be designed in such a way that well-defined fully deterministic target selection, monitoring and detection criteria are applied. The probabilistic nature of gravitational microlensing makes this technique an illustrative example of all the encountered challenges and uncertainties.

  13. Improved wavelet packet classification algorithm for vibrational intrusions in distributed fiber-optic monitoring systems

    Wang, Bingjie; Pi, Shaohua; Sun, Qi; Jia, Bo

    2015-05-01

    An improved classification algorithm that considers multiscale wavelet packet Shannon entropy is proposed. Decomposition coefficients at all levels are obtained to build the initial Shannon entropy feature vector. After subtracting the Shannon entropy map of the background signal, components of the strongest discriminating power in the initial feature vector are picked out to rebuild the Shannon entropy feature vector, which is transferred to radial basis function (RBF) neural network for classification. Four types of man-made vibrational intrusion signals are recorded based on a modified Sagnac interferometer. The performance of the improved classification algorithm has been evaluated by the classification experiments via RBF neural network under different diffusion coefficients. An 85% classification accuracy rate is achieved, which is higher than the other common algorithms. The classification results show that this improved classification algorithm can be used to classify vibrational intrusion signals in an automatic real-time monitoring system.

  14. Standard practice for verification and classification of extensometer systems

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This practice covers procedures for the verification and classification of extensometer systems, but it is not intended to be a complete purchase specification. The practice is applicable only to instruments that indicate or record values that are proportional to changes in length corresponding to either tensile or compressive strain. Extensometer systems are classified on the basis of the magnitude of their errors. 1.2 Because strain is a dimensionless quantity, this document can be used for extensometers based on either SI or US customary units of displacement. Note 1—Bonded resistance strain gauges directly bonded to a specimen cannot be calibrated or verified with the apparatus described in this practice for the verification of extensometers having definite gauge points. (See procedures as described in Test Methods E251.) 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish app...

  15. USDA soil classification system dictates site surface management

    Bowmer, W.J.

    1985-01-01

    Success or failure of site surface management practices greatly affects long-term site stability. The US Department of Agriculture (USDA) soil classification system best documents those parameters which control the success of installed practices for managing both erosion and surface drainage. The USDA system concentrates on soil characteristics in the upper three meters of the surface that support the associated flora both physically and physiologically. The USDA soil survey first identifies soil series based on detailed characteristics that are related to production potential. Using the production potential, land use capability classes are developed. Capability classes reveal the highest and best agronomic use for the site. Lower number classes are considered arable while higher number classes are best suited for grazing agriculture. Application of ecological principles based on the USDA soil survey reveals the current state of the site relative to its ecological potential. To assure success, site management practices must be chosen that are compatible with both production capability and current state of the site

  16. DNA methylation-based classification of central nervous system tumours.

    Capper, David; Jones, David T W; Sill, Martin; Hovestadt, Volker; Schrimpf, Daniel; Sturm, Dominik; Koelsche, Christian; Sahm, Felix; Chavez, Lukas; Reuss, David E; Kratz, Annekathrin; Wefers, Annika K; Huang, Kristin; Pajtler, Kristian W; Schweizer, Leonille; Stichel, Damian; Olar, Adriana; Engel, Nils W; Lindenberg, Kerstin; Harter, Patrick N; Braczynski, Anne K; Plate, Karl H; Dohmen, Hildegard; Garvalov, Boyan K; Coras, Roland; Hölsken, Annett; Hewer, Ekkehard; Bewerunge-Hudler, Melanie; Schick, Matthias; Fischer, Roger; Beschorner, Rudi; Schittenhelm, Jens; Staszewski, Ori; Wani, Khalida; Varlet, Pascale; Pages, Melanie; Temming, Petra; Lohmann, Dietmar; Selt, Florian; Witt, Hendrik; Milde, Till; Witt, Olaf; Aronica, Eleonora; Giangaspero, Felice; Rushing, Elisabeth; Scheurlen, Wolfram; Geisenberger, Christoph; Rodriguez, Fausto J; Becker, Albert; Preusser, Matthias; Haberler, Christine; Bjerkvig, Rolf; Cryan, Jane; Farrell, Michael; Deckert, Martina; Hench, Jürgen; Frank, Stephan; Serrano, Jonathan; Kannan, Kasthuri; Tsirigos, Aristotelis; Brück, Wolfgang; Hofer, Silvia; Brehmer, Stefanie; Seiz-Rosenhagen, Marcel; Hänggi, Daniel; Hans, Volkmar; Rozsnoki, Stephanie; Hansford, Jordan R; Kohlhof, Patricia; Kristensen, Bjarne W; Lechner, Matt; Lopes, Beatriz; Mawrin, Christian; Ketter, Ralf; Kulozik, Andreas; Khatib, Ziad; Heppner, Frank; Koch, Arend; Jouvet, Anne; Keohane, Catherine; Mühleisen, Helmut; Mueller, Wolf; Pohl, Ute; Prinz, Marco; Benner, Axel; Zapatka, Marc; Gottardo, Nicholas G; Driever, Pablo Hernáiz; Kramm, Christof M; Müller, Hermann L; Rutkowski, Stefan; von Hoff, Katja; Frühwald, Michael C; Gnekow, Astrid; Fleischhack, Gudrun; Tippelt, Stephan; Calaminus, Gabriele; Monoranu, Camelia-Maria; Perry, Arie; Jones, Chris; Jacques, Thomas S; Radlwimmer, Bernhard; Gessi, Marco; Pietsch, Torsten; Schramm, Johannes; Schackert, Gabriele; Westphal, Manfred; Reifenberger, Guido; Wesseling, Pieter; Weller, Michael; Collins, Vincent Peter; Blümcke, Ingmar; Bendszus, Martin; Debus, Jürgen; Huang, Annie; Jabado, Nada; Northcott, Paul A; Paulus, Werner; Gajjar, Amar; Robinson, Giles W; Taylor, Michael D; Jaunmuktane, Zane; Ryzhova, Marina; Platten, Michael; Unterberg, Andreas; Wick, Wolfgang; Karajannis, Matthias A; Mittelbronn, Michel; Acker, Till; Hartmann, Christian; Aldape, Kenneth; Schüller, Ulrich; Buslei, Rolf; Lichter, Peter; Kool, Marcel; Herold-Mende, Christel; Ellison, David W; Hasselblatt, Martin; Snuderl, Matija; Brandner, Sebastian; Korshunov, Andrey; von Deimling, Andreas; Pfister, Stefan M

    2018-03-22

    Accurate pathological diagnosis is crucial for optimal management of patients with cancer. For the approximately 100 known tumour types of the central nervous system, standardization of the diagnostic process has been shown to be particularly challenging-with substantial inter-observer variability in the histopathological diagnosis of many tumour types. Here we present a comprehensive approach for the DNA methylation-based classification of central nervous system tumours across all entities and age groups, and demonstrate its application in a routine diagnostic setting. We show that the availability of this method may have a substantial impact on diagnostic precision compared to standard methods, resulting in a change of diagnosis in up to 12% of prospective cases. For broader accessibility, we have designed a free online classifier tool, the use of which does not require any additional onsite data processing. Our results provide a blueprint for the generation of machine-learning-based tumour classifiers across other cancer entities, with the potential to fundamentally transform tumour pathology.

  17. Associations between ozone and morbidity using the Spatial Synoptic Classification system

    Arora Gurmeet

    2011-05-01

    Full Text Available Abstract Background Synoptic circulation patterns (large-scale tropospheric motion systems affect air pollution and, potentially, air-pollution-morbidity associations. We evaluated the effect of synoptic circulation patterns (air masses on the association between ozone and hospital admissions for asthma and myocardial infarction (MI among adults in North Carolina. Methods Daily surface meteorology data (including precipitation, wind speed, and dew point for five selected cities in North Carolina were obtained from the U.S. EPA Air Quality System (AQS, which were in turn based on data from the National Climatic Data Center of the National Oceanic and Atmospheric Administration. We used the Spatial Synoptic Classification system to classify each day of the 9-year period from 1996 through 2004 into one of seven different air mass types: dry polar, dry moderate, dry tropical, moist polar, moist moderate, moist tropical, or transitional. Daily 24-hour maximum 1-hour ambient concentrations of ozone were obtained from the AQS. Asthma and MI hospital admissions data for the 9-year period were obtained from the North Carolina Department of Health and Human Services. Generalized linear models were used to assess the association of the hospitalizations with ozone concentrations and specific air mass types, using pollutant lags of 0 to 5 days. We examined the effect across cities on days with the same air mass type. In all models we adjusted for dew point and day-of-the-week effects related to hospital admissions. Results Ozone was associated with asthma under dry tropical (1- to 5-day lags, transitional (3- and 4-day lags, and extreme moist tropical (0-day lag air masses. Ozone was associated with MI only under the extreme moist tropical (5-day lag air masses. Conclusions Elevated ozone levels are associated with dry tropical, dry moderate, and moist tropical air masses, with the highest ozone levels being associated with the dry tropical air mass. Certain

  18. Drug-induced sedation endoscopy (DISE) classification systems: a systematic review and meta-analysis.

    Dijemeni, Esuabom; D'Amone, Gabriele; Gbati, Israel

    2017-12-01

    Drug-induced sedation endoscopy (DISE) classification systems have been used to assess anatomical findings on upper airway obstruction, and decide and plan surgical treatments and act as a predictor for surgical treatment outcome for obstructive sleep apnoea management. The first objective is to identify if there is a universally accepted DISE grading and classification system for analysing DISE findings. The second objective is to identify if there is one DISE grading and classification treatment planning framework for deciding appropriate surgical treatment for obstructive sleep apnoea (OSA). The third objective is to identify if there is one DISE grading and classification treatment outcome framework for determining the likelihood of success for a given OSA surgical intervention. A systematic review was performed to identify new and significantly modified DISE classification systems: concept, advantages and disadvantages. Fourteen studies proposing a new DISE classification system and three studies proposing a significantly modified DISE classification were identified. None of the studies were based on randomised control trials. DISE is an objective method for visualising upper airway obstruction. The classification and assessment of clinical findings based on DISE is highly subjective due to the increasing number of DISE classification systems. Hence, this creates a growing divergence in surgical treatment planning and treatment outcome. Further research on a universally accepted objective DISE assessment is critically needed.

  19. Mass Properties for Space Systems Standards Development

    Beech, Geoffrey

    2013-01-01

    Current Verbiage in S-120 Applies to Dry Mass. Mass Margin is difference between Required Mass and Predicted Mass. Performance Margin is difference between Predicted Performance and Required Performance. Performance estimates and corresponding margin should be based on Predicted Mass (and other inputs). Contractor Mass Margin reserved from Performance Margin. Remaining performance margin allocated according to mass partials. Compliance can be evaluated effectively by comparison of three areas (preferably on a single sheet). Basic and Predicted Mass (including historical trend). Aggregate potential changes (threats and opportunities) which gives Mass Forecast. Mass Maturity by category (Estimated/Calculated/Actual).

  20. 76 FR 16292 - Medical Devices; Immunology and Microbiology Devices; Classification of Ovarian Adnexal Mass...

    2011-03-23

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 866 [Docket No. FDA-2011-N-0026] Medical Devices; Immunology and Microbiology Devices; Classification of Ovarian... of Food and Drugs, 21 CFR part 866 is amended as follows: PART 866--IMMUNOLOGY AND MICROBIOLOGY...

  1. Perceptual and Acoustic Reliability Estimates for the Speech Disorders Classification System (SDCS)

    Shriberg, Lawrence D.; Fourakis, Marios; Hall, Sheryl D.; Karlsson, Heather B.; Lohmeier, Heather L.; McSweeny, Jane L.; Potter, Nancy L.; Scheer-Cohen, Alison R.; Strand, Edythe A.; Tilkens, Christie M.; Wilson, David L.

    2010-01-01

    A companion paper describes three extensions to a classification system for paediatric speech sound disorders termed the Speech Disorders Classification System (SDCS). The SDCS uses perceptual and acoustic data reduction methods to obtain information on a speaker's speech, prosody, and voice. The present paper provides reliability estimates for…

  2. 42 CFR 419.31 - Ambulatory payment classification (APC) system and payment weights.

    2010-10-01

    ... 42 Public Health 3 2010-10-01 2010-10-01 false Ambulatory payment classification (APC) system and... Outpatient Services § 419.31 Ambulatory payment classification (APC) system and payment weights. (a) APC... of resource use into APC groups. Except as specified in paragraph (a)(2) of this section, items and...

  3. A Challenge to Change: Necessary Changes in the Library Classification System for the Chicago Public Schools.

    Williams, Florence M.

    This report addresses the feasibility of changing the classification of library materials in the Chicago Public School libraries from the Dewey Decimal classification system (DDC) to the Library of Congress system (LC), thus patterning the city school libraries after the Chicago Public Library and strengthening the existing close relationship…

  4. Volunteer-Based System for classification of traffic in computer networks

    Bujlow, Tomasz; Balachandran, Kartheepan; Riaz, M. Tahir

    2011-01-01

    To overcome the drawbacks of existing methods for traffic classification (by ports, Deep Packet Inspection, statistical classification) a new system was developed, in which the data are collected from client machines. This paper presents design of the system, implementation, initial runs and obta...

  5. Mass and Reliability System (MaRS)

    Barnes, Sarah

    2016-01-01

    The Safety and Mission Assurance (S&MA) Directorate is responsible for mitigating risk, providing system safety, and lowering risk for space programs from ground to space. The S&MA is divided into 4 divisions: The Space Exploration Division (NC), the International Space Station Division (NE), the Safety & Test Operations Division (NS), and the Quality and Flight Equipment Division (NT). The interns, myself and Arun Aruljothi, will be working with the Risk & Reliability Analysis Branch under the NC Division's. The mission of this division is to identify, characterize, diminish, and communicate risk by implementing an efficient and effective assurance model. The team utilizes Reliability and Maintainability (R&M) and Probabilistic Risk Assessment (PRA) to ensure decisions concerning risks are informed, vehicles are safe and reliable, and program/project requirements are realistic and realized. This project pertains to the Orion mission, so it is geared toward a long duration Human Space Flight Program(s). For space missions, payload is a critical concept; balancing what hardware can be replaced by components verse by Orbital Replacement Units (ORU) or subassemblies is key. For this effort a database was created that combines mass and reliability data, called Mass and Reliability System or MaRS. The U.S. International Space Station (ISS) components are used as reference parts in the MaRS database. Using ISS components as a platform is beneficial because of the historical context and the environment similarities to a space flight mission. MaRS uses a combination of systems: International Space Station PART for failure data, Vehicle Master Database (VMDB) for ORU & components, Maintenance & Analysis Data Set (MADS) for operation hours and other pertinent data, & Hardware History Retrieval System (HHRS) for unit weights. MaRS is populated using a Visual Basic Application. Once populated, the excel spreadsheet is comprised of information on ISS components including

  6. Application of the Safety Classification of Structures, Systems and Components in Nuclear Power Plants

    2016-04-01

    This publication describes how to complete tasks associated with every step of the classification methodology set out in IAEA Safety Standards Series No. SSG-30, Safety Classification of Structures, Systems and Components in Nuclear Power Plants. In particular, how to capture all the structures, systems and components (SSCs) of a nuclear power plant to be safety classified. Emphasis is placed on the SSCs that are necessary to limit radiological releases to the public and occupational doses to workers in operational conditions This publication provides information for organizations establishing a comprehensive safety classification of SSCs compliant with IAEA recommendations, and to support regulators in reviewing safety classification submitted by licensees

  7. The history of female genital tract malformation classifications and proposal of an updated system.

    Acién, Pedro; Acién, Maribel I

    2011-01-01

    A correct classification of malformations of the female genital tract is essential to prevent unnecessary and inadequate surgical operations and to compare reproductive results. An ideal classification system should be based on aetiopathogenesis and should suggest the appropriate therapeutic strategy. We conducted a systematic review of relevant articles found in PubMed, Scopus, Scirus and ISI webknowledge, and analysis of historical collections of 'female genital malformations' and 'classifications'. Of 124 full-text articles assessed for eligibility, 64 were included because they contained original general, partial or modified classifications. All the existing classifications were analysed and grouped. The unification of terms and concepts was also analysed. Traditionally, malformations of the female genital tract have been catalogued and classified as Müllerian malformations due to agenesis, lack of fusion, the absence of resorption and lack of posterior development of the Müllerian ducts. The American Fertility Society classification of the late 1980s included seven basic groups of malformations also considering the Müllerian development and the relationship of the malformations to fertility. Other classifications are based on different aspects: functional, defects in vertical fusion, embryological or anatomical (Vagina, Cervix, Uterus, Adnex and Associated Malformation: VCUAM classification). However, an embryological-clinical classification system seems to be the most appropriate. Accepting the need for a new classification system of genitourinary malformations that considers the experience gained from the application of the current classification systems, the aetiopathogenesis and that also suggests the appropriate treatment, we proposed an update of our embryological-clinical classification as a new system with six groups of female genitourinary anomalies.

  8. A hazard and risk classification system for catastrophic rock slope failures in Norway

    Hermanns, R.; Oppikofer, T.; Anda, E.; Blikra, L. H.; Böhme, M.; Bunkholt, H.; Dahle, H.; Devoli, G.; Eikenæs, O.; Fischer, L.; Harbitz, C. B.; Jaboyedoff, M.; Loew, S.; Yugsi Molina, F. X.

    2012-04-01

    The Geological Survey of Norway carries out systematic geologic mapping of potentially unstable rock slopes in Norway that can cause a catastrophic failure. As catastrophic failure we describe failures that involve substantial fragmentation of the rock mass during run-out and that impact an area larger than that of a rock fall (shadow angle of ca. 28-32° for rock falls). This includes therefore rock slope failures that lead to secondary effects, such as a displacement wave when impacting a water body or damming of a narrow valley. Our systematic mapping revealed more than 280 rock slopes with significant postglacial deformation, which might represent localities of large future rock slope failures. This large number necessitates prioritization of follow-up activities, such as more detailed investigations, periodic monitoring and permanent monitoring and early-warning. In the past hazard and risk were assessed qualitatively for some sites, however, in order to compare sites so that political and financial decisions can be taken, it was necessary to develop a quantitative hazard and risk classification system. A preliminary classification system was presented and discussed with an expert group of Norwegian and international experts and afterwards adapted following their recommendations. This contribution presents the concept of this final hazard and risk classification that should be used in Norway in the upcoming years. Historical experience and possible future rockslide scenarios in Norway indicate that hazard assessment of large rock slope failures must be scenario-based, because intensity of deformation and present displacement rates, as well as the geological structures activated by the sliding rock mass can vary significantly on a given slope. In addition, for each scenario the run-out of the rock mass has to be evaluated. This includes the secondary effects such as generation of displacement waves or landslide damming of valleys with the potential of later

  9. Lenke and King classification systems for adolescent idiopathic scoliosis: interobserver agreement and postoperative results

    Hosseinpour-Feizi H

    2011-12-01

    Full Text Available Hojjat Hosseinpour-Feizi, Jafar Soleimanpour, Jafar Ganjpour Sales, Ali ArzroumchilarDepartment of Orthopedics, Shohada Hospital, Faculty of Medicine, Tabriz University of Medical Sciences, Tabriz, IranPurpose: The aim of this study was to investigate the interobserver agreement of the Lenke and King classifications for adolescent idiopathic scoliosis, and to compare the results of surgery performed based on classification of the scoliosis according to each of these classification systems.Methods: The study was conducted in Shohada Hospital in Tabriz, Iran, between 2009 and 2010. First, a reliability assessment was undertaken to assess interobserver agreement of the Lenke and King classifications for adolescent idiopathic scoliosis. Second, postoperative efficacy and safety of surgery performed based on the Lenke and King classifications were compared. Kappa coefficients of agreement were calculated to assess the agreement. Outcomes were compared using bivariate tests and repeated measures analysis of variance.Results: A low to moderate interobserver agreement was observed for the King classification; the Lenke classification yielded mostly high agreement coefficients. The outcome of surgery was not found to be substantially different between the two systems.Conclusion: Based on the results, the Lenke classification method seems advantageous. This takes into consideration the Lenke classification’s priority in providing details of curvatures in different anatomical surfaces to explain precise intensity of scoliosis, that it has higher interobserver agreement scores, and also that it leads to noninferior postoperative results compared with the King classification method.Keywords: test reliability, scoliosis classification, postoperative efficacy, adolescents

  10. Lenke and King classification systems for adolescent idiopathic scoliosis: interobserver agreement and postoperative results.

    Hosseinpour-Feizi, Hojjat; Soleimanpour, Jafar; Sales, Jafar Ganjpour; Arzroumchilar, Ali

    2011-01-01

    The aim of this study was to investigate the interobserver agreement of the Lenke and King classifications for adolescent idiopathic scoliosis, and to compare the results of surgery performed based on classification of the scoliosis according to each of these classification systems. The study was conducted in Shohada Hospital in Tabriz, Iran, between 2009 and 2010. First, a reliability assessment was undertaken to assess interobserver agreement of the Lenke and King classifications for adolescent idiopathic scoliosis. Second, postoperative efficacy and safety of surgery performed based on the Lenke and King classifications were compared. Kappa coefficients of agreement were calculated to assess the agreement. Outcomes were compared using bivariate tests and repeated measures analysis of variance. A low to moderate interobserver agreement was observed for the King classification; the Lenke classification yielded mostly high agreement coefficients. The outcome of surgery was not found to be substantially different between the two systems. Based on the results, the Lenke classification method seems advantageous. This takes into consideration the Lenke classification's priority in providing details of curvatures in different anatomical surfaces to explain precise intensity of scoliosis, that it has higher interobserver agreement scores, and also that it leads to noninferior postoperative results compared with the King classification method.

  11. Meet interesting abbreviations in clinical mass spectrometry: from compound classification by REIMS to multimodal and mass spectrometry imaging (MSI)

    Luptáková, Dominika; Pluháček, Tomáš; Palyzová, Andrea; Přichystal, Jakub; Balogh, J.; Lemr, Karel; Juránek, I.; Havlíček, Vladimír

    2017-01-01

    Roč. 61, č. 3 (2017), s. 353-360 ISSN 0001-723X R&D Projects: GA MŠk(CZ) LO1509; GA ČR(CZ) GA16-20229S Institutional support: RVO:61388971 Keywords : REIMS * multimodal * mass spectrometry imaging Subject RIV: EE - Microbiology, Virology OBOR OECD: Microbiology Impact factor: 0.673, year: 2016

  12. Biopharmaceutics classification system: importance and inclusion in biowaiver guidance

    Lorena Barbosa Arrunátegui

    2015-03-01

    Full Text Available Pharmacological therapy is essential in many diseases treatment and it is important that the medicine policy is intended to offering safe and effective treatment with affordable price to the population. One way to achieve this is through biowaiver, defined as the replacement of in vivo bioequivalence studies by in vitro studies. For biowaiver of new immediate release solid oral dosage forms, data such as intestinal permeability and solubility of the drug are required, as well as the product dissolution. The Biopharmaceutics Classification System (BCS is a scientific scheme that divides drugs according to their solubility and permeability and has been used by various guides as a criterion for biowaiver. This paper evaluates biowaiver application, addressing the general concepts and parameters used by BCS, making a historical account of its use, the requirements pertaining to the current legislation, the benefits and risks associated with this decision. The results revealed that the use of BCS as a biowaiver criterion greatly expands the therapeutics options, contributing to greater therapy access of the general population with drug efficacy and safety guaranteed associated to low cost.

  13. Classification System for Individualized Treatment of Adult Buried Penis Syndrome.

    Tausch, Timothy J; Tachibana, Isamu; Siegel, Jordan A; Hoxworth, Ronald; Scott, Jeremy M; Morey, Allen F

    2016-09-01

    The authors present their experience with reconstructive strategies for men with various manifestations of adult buried penis syndrome, and propose a comprehensive anatomical classification system and treatment algorithm based on pathologic changes in the penile skin and involvement of neighboring abdominal and/or scrotal components. The authors reviewed all patients who underwent reconstruction of adult buried penis syndrome at their referral center between 2007 and 2015. Patients were stratified by location and severity of involved anatomical components. Procedures performed, demographics, comorbidities, and clinical outcomes were reviewed. Fifty-six patients underwent reconstruction of buried penis at the authors' center from 2007 to 2015. All procedures began with a ventral penile release. If the uncovered penile skin was determined to be viable, a phalloplasty was performed by anchoring penoscrotal skin to the proximal shaft, and the ventral shaft skin defect was closed with scrotal flaps. In more complex patients with circumferential nonviable penile skin, the penile skin was completely excised and replaced with a split-thickness skin graft. Complex patients with severe abdominal lipodystrophy required adjacent tissue transfer. For cases of genital lymphedema, the procedure involved complete excision of the lymphedematous tissue, and primary closure with or without a split-thickness skin graft, also often involving the scrotum. The authors' overall success rate was 88 percent (49 of 56), defined as resolution of symptoms without the need for additional procedures. Successful correction of adult buried penis often necessitates an interdisciplinary, multimodal approach. Therapeutic, IV.

  14. Intra- and interrater reliability of three different MRI grading and classification systems after acute hamstring injuries.

    Wangensteen, Arnlaug; Tol, Johannes L; Roemer, Frank W; Bahr, Roald; Dijkstra, H Paul; Crema, Michel D; Farooq, Abdulaziz; Guermazi, Ali

    2017-04-01

    To assess and compare the intra- and interrater reliability of three different MRI grading and classification systems after acute hamstring injury. Male athletes (n=40) with clinical diagnosis of acute hamstring injury and MRI ≤5days were selected from a prospective cohort. Two radiologists independently evaluated the MRIs using standardised scoring form including the modified Peetrons grading system, the Chan acute muscle strain injury classification and the British Athletics Muscle Injury Classification. Intra-and interrater reliability was assessed with linear weighted kappa (κ) or unweighted Cohen's κ and percentage agreement was calculated. We observed 'substantial' to 'almost perfect' intra- (κ range 0.65-1.00) and interrater reliability (κ range 0.77-1.00) with percentage agreement 83-100% and 88-100%, respectively, for severity gradings, overall anatomical sites and overall classifications for the three MRI systems. We observed substantial variability (κ range -0.05 to 1.00) for subcategories within the Chan classification and the British Athletics Muscle Injury Classification, however, the prevalence of positive scorings was low for some subcategories. The modified Peetrons grading system, overall Chan classification and overall British Athletics Muscle Injury Classification demonstrated 'substantial' to 'almost perfect' intra- and interrater reliability when scored by experienced radiologists. The intra- and interrater reliability for the anatomical subcategories within the classifications remains unclear. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Guidance on classification for reproductive toxicity under the globally harmonized system of classification and labelling of chemicals (GHS).

    Moore, Nigel P; Boogaard, Peter J; Bremer, Susanne; Buesen, Roland; Edwards, James; Fraysse, Benoit; Hallmark, Nina; Hemming, Helena; Langrand-Lerche, Carole; McKee, Richard H; Meisters, Marie-Louise; Parsons, Paul; Politano, Valerie; Reader, Stuart; Ridgway, Peter; Hennes, Christa

    2013-11-01

    The Globally Harmonised System of Classification (GHS) is a framework within which the intrinsic hazards of substances may be determined and communicated. It is not a legislative instrument per se, but is enacted into national legislation with the appropriate legislative instruments. GHS covers many aspects of effects upon health and the environment, including adverse effects upon sexual function and fertility or on development. Classification for these effects is based upon observations in humans or from properly designed experiments in animals, although only the latter is covered herein. The decision to classify a substance based upon experimental data, and the category of classification ascribed, is determined by the level of evidence that is available for an adverse effect on sexual function and fertility or on development that does not arise as a secondary non-specific consequence of other toxic effect. This document offers guidance on the determination of level of concern as a measure of adversity, and the level of evidence to ascribe classification based on data from tests in laboratory animals.

  16. Transporter Classification Database (TCDB)

    U.S. Department of Health & Human Services — The Transporter Classification Database details a comprehensive classification system for membrane transport proteins known as the Transporter Classification (TC)...

  17. Toward a common classification approach for biorefinery systems

    Cherubini, F.; Jungmeier, G.; Wellisch, M.; Wilke, T.; Skiadas, I.; Ree, van R.; Jong, de E.

    2009-01-01

    This paper deals with a biorefinery classification approach developed within International Energy Agency (IEA) Bioenergy Task 42. Since production of transportation biofuels is seen as the driving force for future biorefinery developments, a selection of the most interesting transportation biofuels

  18. Mining vehicle classifications from the Columbus Metropolitan Freeway Management System.

    2015-01-01

    Vehicle classification data are used in many transportation applications, including: pavement design, : environmental impact studies, traffic control, and traffic safety. Ohio has over 200 permanent count stations, : supplemented by many more short-t...

  19. Lie Group Classification of a Generalized Lane-Emden Type System in Two Dimensions

    Motlatsi Molati

    2012-01-01

    Full Text Available The aim of this work is to perform a complete Lie symmetry classification of a generalized Lane-Emden type system in two dimensions which models many physical phenomena in biological and physical sciences. The classical approach of group classification is employed for classification. We show that several cases arise in classifying the arbitrary parameters, the forms of which include amongst others the power law nonlinearity, and exponential and quadratic forms.

  20. Mass loss from interacting close binary systems

    Plavec, M. J.

    1981-01-01

    The three well-defined classes of evolved binary systems that show evidence of present and/or past mass loss are the cataclysmic variables, the Algols, and Wolf-Rayet stars. It is thought that the transformation of supergiant binary systems into the very short-period cataclysmic variables must have been a complex process. The new evidence that has recently been obtained from the far ultraviolet spectra that a certain subclass of the Algols (the Serpentids) are undergoing fairly rapid evolution is discussed. It is thought probable that the remarkable mass outflow observed in them is connected with a strong wind powered by accretion. The origin of the circumbinary clouds or flat disks that probably surround many strongly interacting binaries is not clear. Attention is also given to binary systems with hot white dwarf or subdwarf components, such as the symbiotic objects and the BQ stars; it is noted that in them both components may be prone to an enhanced stellar wind.

  1. Intra- and interrater reliability of three different MRI grading and classification systems after acute hamstring injuries

    Wangensteen, Arnlaug; Tol, Johannes L.; Roemer, Frank W.; Bahr, Roald; Dijkstra, H. Paul; Crema, Michel D.; Farooq, Abdulaziz; Guermazi, Ali

    2017-01-01

    Highlights: • Three different MRI grading and classification systems for acute hamstring injuries are overall reliable. • Reliability for the subcategories within these MRI grading and classification systems remains, however, unclear. - Abstract: Objective: To assess and compare the intra- and interrater reliability of three different MRI grading and classification systems after acute hamstring injury. Methods: Male athletes (n = 40) with clinical diagnosis of acute hamstring injury and MRI ≤5 days were selected from a prospective cohort. Two radiologists independently evaluated the MRIs using standardised scoring form including the modified Peetrons grading system, the Chan acute muscle strain injury classification and the British Athletics Muscle Injury Classification. Intra-and interrater reliability was assessed with linear weighted kappa (κ) or unweighted Cohen's κ and percentage agreement was calculated. Results: We observed ‘substantial’ to ‘almost perfect’ intra- (κ range 0.65–1.00) and interrater reliability (κ range 0.77–1.00) with percentage agreement 83–100% and 88–100%, respectively, for severity gradings, overall anatomical sites and overall classifications for the three MRI systems. We observed substantial variability (κ range −0.05 to 1.00) for subcategories within the Chan classification and the British Athletics Muscle Injury Classification, however, the prevalence of positive scorings was low for some subcategories. Conclusions: The modified Peetrons grading system, overall Chan classification and overall British Athletics Muscle Injury Classification demonstrated ‘substantial' to ‘almost perfect' intra- and interrater reliability when scored by experienced radiologists. The intra- and interrater reliability for the anatomical subcategories within the classifications remains unclear.

  2. Intra- and interrater reliability of three different MRI grading and classification systems after acute hamstring injuries

    Wangensteen, Arnlaug, E-mail: arnlaug.wangensteen@nih.no [Aspetar, Orthopaedic and Sports Medicine Hospital, Doha (Qatar); Oslo Sports Trauma Research Center, Department of Sports Medicine, Norwegian School of Sport Sciences, Oslo (Norway); Tol, Johannes L., E-mail: johannes.tol@aspetar.com [Aspetar, Orthopaedic and Sports Medicine Hospital, Doha (Qatar); Amsterdam Center for Evidence Sports Medicine, Academic Medical Center (Netherlands); The Sports Physician Group, OLVG, Amsterdam (Netherlands); Roemer, Frank W. [Quantitative Imaging Center, Department of Radiology, Boston University School of Medicine, Boston, MA (United States); Department of Radiology, University of Erlangen-Nuremberg, Erlangen (Germany); Bahr, Roald [Aspetar, Orthopaedic and Sports Medicine Hospital, Doha (Qatar); Oslo Sports Trauma Research Center, Department of Sports Medicine, Norwegian School of Sport Sciences, Oslo (Norway); Dijkstra, H. Paul [Aspetar, Orthopaedic and Sports Medicine Hospital, Doha (Qatar); Crema, Michel D. [Quantitative Imaging Center, Department of Radiology, Boston University School of Medicine, Boston, MA (United States); Department of Radiology, Saint-Antoine Hospital, University Paris VI, Paris (France); Farooq, Abdulaziz [Aspetar, Orthopaedic and Sports Medicine Hospital, Doha (Qatar); Guermazi, Ali [Quantitative Imaging Center, Department of Radiology, Boston University School of Medicine, Boston, MA (United States)

    2017-04-15

    Highlights: • Three different MRI grading and classification systems for acute hamstring injuries are overall reliable. • Reliability for the subcategories within these MRI grading and classification systems remains, however, unclear. - Abstract: Objective: To assess and compare the intra- and interrater reliability of three different MRI grading and classification systems after acute hamstring injury. Methods: Male athletes (n = 40) with clinical diagnosis of acute hamstring injury and MRI ≤5 days were selected from a prospective cohort. Two radiologists independently evaluated the MRIs using standardised scoring form including the modified Peetrons grading system, the Chan acute muscle strain injury classification and the British Athletics Muscle Injury Classification. Intra-and interrater reliability was assessed with linear weighted kappa (κ) or unweighted Cohen's κ and percentage agreement was calculated. Results: We observed ‘substantial’ to ‘almost perfect’ intra- (κ range 0.65–1.00) and interrater reliability (κ range 0.77–1.00) with percentage agreement 83–100% and 88–100%, respectively, for severity gradings, overall anatomical sites and overall classifications for the three MRI systems. We observed substantial variability (κ range −0.05 to 1.00) for subcategories within the Chan classification and the British Athletics Muscle Injury Classification, however, the prevalence of positive scorings was low for some subcategories. Conclusions: The modified Peetrons grading system, overall Chan classification and overall British Athletics Muscle Injury Classification demonstrated ‘substantial' to ‘almost perfect' intra- and interrater reliability when scored by experienced radiologists. The intra- and interrater reliability for the anatomical subcategories within the classifications remains unclear.

  3. Recursive SVM feature selection and sample classification for mass-spectrometry and microarray data

    Harris Lyndsay N

    2006-04-01

    Full Text Available Abstract Background Like microarray-based investigations, high-throughput proteomics techniques require machine learning algorithms to identify biomarkers that are informative for biological classification problems. Feature selection and classification algorithms need to be robust to noise and outliers in the data. Results We developed a recursive support vector machine (R-SVM algorithm to select important genes/biomarkers for the classification of noisy data. We compared its performance to a similar, state-of-the-art method (SVM recursive feature elimination or SVM-RFE, paying special attention to the ability of recovering the true informative genes/biomarkers and the robustness to outliers in the data. Simulation experiments show that a 5 %-~20 % improvement over SVM-RFE can be achieved regard to these properties. The SVM-based methods are also compared with a conventional univariate method and their respective strengths and weaknesses are discussed. R-SVM was applied to two sets of SELDI-TOF-MS proteomics data, one from a human breast cancer study and the other from a study on rat liver cirrhosis. Important biomarkers found by the algorithm were validated by follow-up biological experiments. Conclusion The proposed R-SVM method is suitable for analyzing noisy high-throughput proteomics and microarray data and it outperforms SVM-RFE in the robustness to noise and in the ability to recover informative features. The multivariate SVM-based method outperforms the univariate method in the classification performance, but univariate methods can reveal more of the differentially expressed features especially when there are correlations between the features.

  4. Relevance of the formal red meat classification system to the South ...

    Relevance of the formal red meat classification system to the South African ... to market information make them less willing to sell their animals through the formal market. ... Keywords: Communal farmers, marketing system, meat industry ...

  5. 5 CFR 9901.231 - Conversion of positions and employees to NSPS classification system.

    2010-01-01

    ... HUMAN RESOURCES MANAGEMENT AND LABOR RELATIONS SYSTEMS (DEPARTMENT OF DEFENSE-OFFICE OF PERSONNEL MANAGEMENT) DEPARTMENT OF DEFENSE NATIONAL SECURITY PERSONNEL SYSTEM (NSPS) Classification Transitional... employee's career group, pay schedule, and band upon conversion. (d) Grade retention prior to conversion...

  6. Understanding the use of standardized nursing terminology and classification systems in published research: A case study using the International Classification for Nursing Practice(®).

    Strudwick, Gillian; Hardiker, Nicholas R

    2016-10-01

    In the era of evidenced based healthcare, nursing is required to demonstrate that care provided by nurses is associated with optimal patient outcomes, and a high degree of quality and safety. The use of standardized nursing terminologies and classification systems are a way that nursing documentation can be leveraged to generate evidence related to nursing practice. Several widely-reported nursing specific terminologies and classifications systems currently exist including the Clinical Care Classification System, International Classification for Nursing Practice(®), Nursing Intervention Classification, Nursing Outcome Classification, Omaha System, Perioperative Nursing Data Set and NANDA International. However, the influence of these systems on demonstrating the value of nursing and the professions' impact on quality, safety and patient outcomes in published research is relatively unknown. This paper seeks to understand the use of standardized nursing terminology and classification systems in published research, using the International Classification for Nursing Practice(®) as a case study. A systematic review of international published empirical studies on, or using, the International Classification for Nursing Practice(®) were completed using Medline and the Cumulative Index for Nursing and Allied Health Literature. Since 2006, 38 studies have been published on the International Classification for Nursing Practice(®). The main objectives of the published studies have been to validate the appropriateness of the classification system for particular care areas or populations, further develop the classification system, or utilize it to support the generation of new nursing knowledge. To date, most studies have focused on the classification system itself, and a lesser number of studies have used the system to generate information about the outcomes of nursing practice. Based on the published literature that features the International Classification for Nursing

  7. Oro-facial pain and temporomandibular disorders classification systems: A critical appraisal and future directions.

    Klasser, G D; Manfredini, D; Goulet, J-P; De Laat, A

    2018-03-01

    It is a difficult undertaking to design a classification system for any disease entity, let alone for oro-facial pain (OFP) and more specifically for temporomandibular disorders (TMD). A further complication of this task is that both physical and psychosocial variables must be included. To augment this process, a two-step systematic review, adhering to PRISMA guidelines, of the classification systems published during the last 20 years for OFP and TMD was performed. The first search step identified 190 potential citations which ultimately resulted in only 17 articles being included for in-depth analysis and review. The second step resulted in only 5 articles being selected for inclusion in this review. Five additional articles and four classification guidelines/criteria were also included due to expansion of the search criteria. Thus, in total, 14 documents comprising articles and guidelines/criteria (8 proposals of classification systems for OFP; 6 for TMD) were selected for inclusion in the systematic review. For each, a discussion as to their advantages, strengths and limitations was provided. Suggestions regarding the future direction for improving the classification process with the use of ontological principles rather than taxonomy are discussed. Furthermore, the potential for expanding the scope of axes included in existing classification systems, to include genetic, epigenetic and neurobiological variables, is explored. It is therefore recommended that future classification system proposals be based on combined approaches aiming to provide archetypal treatment-oriented classifications. © 2017 John Wiley & Sons Ltd.

  8. Socializing the human factors analysis and classification system: incorporating social psychological phenomena into a human factors error classification system.

    Paletz, Susannah B F; Bearman, Christopher; Orasanu, Judith; Holbrook, Jon

    2009-08-01

    The presence of social psychological pressures on pilot decision making was assessed using qualitative analyses of critical incident interviews. Social psychological phenomena have long been known to influence attitudes and behavior but have not been highlighted in accident investigation models. Using a critical incident method, 28 pilots who flew in Alaska were interviewed. The participants were asked to describe a situation involving weather when they were pilot in command and found their skills challenged. They were asked to describe the incident in detail but were not explicitly asked to identify social pressures. Pressures were extracted from transcripts in a bottom-up manner and then clustered into themes. Of the 28 pilots, 16 described social psychological pressures on their decision making, specifically, informational social influence, the foot-in-the-door persuasion technique, normalization of deviance, and impression management and self-consistency motives. We believe accident and incident investigations can benefit from explicit inclusion of common social psychological pressures. We recommend specific ways of incorporating these pressures into theHuman Factors Analysis and Classification System.

  9. Water Mass Classification on a Highly Variable Arctic Shelf Region: Origin of Laptev Sea Water Masses and Implications for the Nutrient Budget

    Bauch, D.; Cherniavskaia, E.

    2018-03-01

    Large gradients and inter annual variations on the Laptev Sea shelf prevent the use of uniform property ranges for a classification of major water masses. The central Laptev Sea is dominated by predominantly marine waters, locally formed polynya waters and riverine summer surface waters. Marine waters enter the central Laptev Sea from the northwestern Laptev Sea shelf and originate from the Kara Sea or the Arctic Ocean halocline. Local polynya waters are formed in the Laptev Sea coastal polynyas. Riverine summer surface waters are formed from Lena river discharge and local melt. We use a principal component analysis (PCA) in order to assess the distribution and importance of water masses within the Laptev Sea. This mathematical method is applied to hydro-chemical summer data sets from the Laptev Sea from five years and allows to define water types based on objective and statistically significant criteria. We argue that the PCA-derived water types are consistent with the Laptev Sea hydrography and indeed represent the major water masses on the central Laptev Sea shelf. Budgets estimated for the thus defined major Laptev Sea water masses indicate that freshwater inflow from the western Laptev Sea is about half or in the same order of magnitude as freshwater stored in locally formed polynya waters. Imported water dominates the nutrient budget in the central Laptev Sea; and only in years with enhanced local polynya activity is the nutrient budget of the locally formed water in the same order as imported nutrients.

  10. Precise Masses in the WASP-47 System

    Vanderburg, Andrew; Becker, Juliette C.; Buchhave, Lars A.; Mortier, Annelies; Lopez, Eric; Malavolta, Luca; Haywood, Raphaëlle D.; Latham, David W.; Charbonneau, David; López-Morales, Mercedes; Adams, Fred C.; Bonomo, Aldo Stefano; Bouchy, François; Collier Cameron, Andrew; Cosentino, Rosario; Di Fabrizio, Luca; Dumusque, Xavier; Fiorenzano, Aldo; Harutyunyan, Avet; Johnson, John Asher; Lorenzi, Vania; Lovis, Christophe; Mayor, Michel; Micela, Giusi; Molinari, Emilio; Pedani, Marco; Pepe, Francesco; Piotto, Giampaolo; Phillips, David; Rice, Ken; Sasselov, Dimitar; Ségransan, Damien; Sozzetti, Alessandro; Udry, Stéphane; Watson, Chris

    2017-12-01

    We present precise radial velocity observations of WASP-47, a star known to host a hot Jupiter, a distant Jovian companion, and, uniquely, two additional transiting planets in short-period orbits: a super-Earth in a ≈19 hr orbit, and a Neptune in a ≈9 day orbit. We analyze our observations from the HARPS-N spectrograph along with previously published data to measure the most precise planet masses yet for this system. When combined with new stellar parameters and reanalyzed transit photometry, our mass measurements place strong constraints on the compositions of the two small planets. We find that, unlike most other ultra-short-period planets, the inner planet, WASP-47 e, has a mass (6.83 ± 0.66 {M}\\oplus ) and a radius (1.810 ± 0.027 {R}\\oplus ) that are inconsistent with an Earth-like composition. Instead, WASP-47 e likely has a volatile-rich envelope surrounding an Earth-like core and mantle. We also perform a dynamical analysis to constrain the orbital inclination of WASP-47 c, the outer Jovian planet. This planet likely orbits close to the plane of the inner three planets, suggesting a quiet dynamical history for the system. Our dynamical constraints also imply that WASP-47 c is much more likely to transit than a geometric calculation would suggest. We calculate a transit probability for WASP-47 c of about 10%, more than an order of magnitude larger than the geometric transit probability of 0.6%.

  11. Classification of mass matrices and the calculability of the Cabibbo angle

    Rizzo, T.G.

    1981-01-01

    We have analyzed all possible 2 x 2 mass matrices with two nonzero elements in an attempt to find which matrices yield a reasonable value of the Cabibbo angle upon diagonalization. We do not concern ourselves with the origin of these mass matrices (spontaneous symmetry breaking, bare-mass term, etc.). We find that, in the limit m/sub u//m/sub c/→0, only four possible relationships exist between sin 2 theta/sub C/ and the quark mass ratio m/sub d//m/sub s/, only one of which is reasonable for the usual value of m/sub d//m/sub s/ (approx.1/20). This limits the possible forms of the quark mass matrix to be two in number, both of which have been discussed previously in the literature

  12. Classification of nutrient emission sources in the Vistula River system

    Kowalkowski, Tomasz

    2009-01-01

    Eutrophication of the Baltic sea still remains one of the biggest problems in the north-eastern area of Europe. Recognizing the sources of nutrient emission, classification of their importance and finding the way towards reduction of pollution are the most important tasks for scientists researching this area. This article presents the chemometric approach to the classification of nutrient emission with respect to the regionalisation of emission sources within the Vistula River basin (Poland). Modelled data for mean yearly emission of nitrogen and phosphorus in 1991-2000 has been used for the classification. Seventeen subcatchements in the Vistula basin have been classified according to cluster and factor analyses. The results of this analysis allowed determination of groups of areas with similar pollution characteristics and indicate the need for spatial differentiation of policies and strategies. Three major factors indicating urban, erosion and agricultural sources have been identified as major discriminants of the groups. - Two classification methods applied to evaluate the results of nutrient emission allow definition of major sources of the emissions and classification of catchments with similar pollution.

  13. Nuclear power plant systems, structures and components and their safety classification

    2000-01-01

    The assurance of a nuclear power plant's safety is based on the reliable functioning of the plant as well as on its appropriate maintenance and operation. To ensure the reliability of operation, special attention shall be paid to the design, manufacturing, commissioning and operation of the plant and its components. To control these functions the nuclear power plant is divided into structural and functional entities, i.e. systems. A systems safety class is determined by its safety significance. Safety class specifies the procedures to be employed in plant design, construction, monitoring and operation. The classification document contains all documentation related to the classification of the nuclear power plant. The principles of safety classification and the procedures pertaining to the classification document are presented in this guide. In the Appendix of the guide, examples of systems most typical of each safety class are given to clarify the safety classification principles

  14. Initial steps towards an evidence-based classification system for golfers with a physical impairment

    Stoter, Inge K.; Hettinga, Florentina J.; Altmann, Viola; Eisma, Wim; Arendzen, Hans; Bennett, Tony; van der Woude, Lucas H.; Dekker, Rienk

    2017-01-01

    Purpose: The present narrative review aims to make a first step towards an evidence-based classification system in handigolf following the International Paralympic Committee (IPC). It intends to create a conceptual framework of classification for handigolf and an agenda for future research. Method:

  15. Classification of Metal-Deficient Dwarfs in the Vilnius Photometric System

    Lazauskaitė R.

    2003-12-01

    Full Text Available Methods used for the quantitative classification of metal-deficient stars in the Vilnius photometric system are reviewed. We present a new calibration of absolute magnitudes for dwarfs and subdwarfs, based on Hipparcos parallaxes. The new classification scheme is applied to a sample of Population II visual binaries.

  16. An ecological classification system for the central hardwoods region: The Hoosier National Forest

    James E. Van Kley; George R. Parker

    1993-01-01

    This study, a multifactor ecological classification system, using vegetation, soil characteristics, and physiography, was developed for the landscape of the Hoosier National Forest in Southern Indiana. Measurements of ground flora, saplings, and canopy trees from selected stands older than 80 years were subjected to TWINSPAN classification and DECORANA ordination....

  17. Possible mass distributions in the nebulae of other solar systems

    Brown, W.K.

    1987-01-01

    The supernova shell fragmentation model of solar system formation - previously shown to be successful in describing the mass distribution of our solar system - is used to calculate the mass distributions of other solar nebulae. (Auth.)

  18. Toward a common classification approach for biorefinery systems

    Cherubini, Francesco; Jungmeier, Gerfried; Wellisch, Maria

    2009-01-01

    until 2020 is based on their characteristics to be mixed with gasoline, diesel and natural gas, reflecting the main advantage of using the already-existing infrastructure for easier market introduction. This classification approach relies on four main features: (1) platforms; (2) products; (3) feedstock...

  19. 42 CFR 412.620 - Patient classification system.

    2010-10-01

    ...-mix group classifications and weighting factors. We may periodically adjust the case-mix groups and... rehabilitation facilities into mutually exclusive case-mix groups. (2) For purposes of this subpart, case-mix... assessments under § 412.610(c)(1) are used to classify a Medicare patient into an appropriate case-mix group...

  20. Meta-language for land use classification systems

    Cooper, Antony K

    2014-04-01

    Full Text Available This presentation provides an overview of a meta-language for land use classification. It also explains why land use can’t always be determined from imagery, and why land use is not the same as land cover, zoning or planning - though...

  1. Generating Clustered Journal Maps : An Automated System for Hierarchical Classification

    Leydesdorff, L.; Bornmann, L.; Wagner, C.S.

    2017-01-01

    Journal maps and classifications for 11,359 journals listed in the combined Journal Citation Reports 2015 of the Science and Social Sciences Citation Indexes are provided at https://leydesdorff.github.io/journals/ and http://www.leydesdorff.net/jcr15. A routine using VOSviewer for integrating the

  2. Modeling the Motion of an Increasing Mass System

    Kunkel, William; Harrington, Randal

    2010-01-01

    Problems on the dynamics of changing mass systems often call for the more general form of Newton's second law Fnet = dp/dt. These problems usually involve situations where the mass of the system decreases, such as in rocket propulsion. In contrast, this experiment examines a system where the mass "increases" at a constant rate and the net force…

  3. A digital squarer system for positive mass identification on the ARL ion microprobe mass analyser

    Woods, K.N.; Grant, L.D.V.; Rawsthorne, E.D.; Strydom, H.J.; Gries, W.H.

    1984-01-01

    The original analogue squarer for mass scale linearisation in the Ion Microprobe Mass Analyser (IMMA) has been replaced by a programmable digital squarer system which permits reliable mass number identification throughout the tested range 1 to 240. The digital squarer provides signals to both a digital direct reading mass number display and to an X-Y recorder where it provides a linear mass scale correct to within 0,3 mass units. An additional output to a computer can provide binary or BCD mass number data

  4. CLASSIFICATION OF SYSTEMS FOR PASSIVE AFTERHEAT REMOVAL FROM REACTOR CONTAINMENT OF NUCLEAR POWER PLANT WITH WATER-COOLED POWER REACTOR

    N. Khaled

    2014-01-01

    Full Text Available A classification on systems for passive afterheat removal from reactor containment has been developed in the paper.  The classification permits to make a detailed analysis of various concepts pertaining to systems for passive afterheat removal from reactor containment of new generation. The paper considers main classification features of the given systems.

  5. A review on fault classification methodologies in power transmission systems: Part-II

    Avagaddi Prasad

    2018-05-01

    Full Text Available The countless extent of power systems and applications requires the improvement in suitable techniques for the fault classification in power transmission systems, to increase the efficiency of the systems and to avoid major damages. For this purpose, the technical literature proposes a large number of methods. The paper analyzes the technical literature, summarizing the most important methods that can be applied to fault classification methodologies in power transmission systems.The part 2 of the article is named “A review on fault classification methodologies in power transmission systems”. In this part 2 we discussed the advanced technologies developed by various researchers for fault classification in power transmission systems. Keywords: Transmission line protection, Protective relaying, Soft computing techniques

  6. Overview of Four Functional Classification Systems Commonly Used in Cerebral Palsy

    Andrea Paulson

    2017-04-01

    Full Text Available Cerebral palsy (CP is the most common physical disability in childhood. CP comprises a heterogeneous group of disorders that can result in spasticity, dystonia, muscle contractures, weakness and coordination difficulty that ultimately affects the ability to control movements. Traditionally, CP has been classified using a combination of the motor type and the topographical distribution, as well as subjective severity level. Imprecise terms such as these tell very little about what a person is able to do functionally and can impair clear communication between providers. More recently, classification systems have been created employing a simple ordinal grading system of functional performance. These systems allow a more precise discussion between providers, as well as better subject stratification for research. The goal of this review is to describe four common functional classification systems for cerebral palsy: the Gross Motor Function Classification System (GMFCS, the Manual Ability Classification System (MACS, the Communication Function Classification System (CFCS, and the Eating and Drinking Ability Classification System (EDACS. These measures are all standardized, reliable, and complementary to one another.

  7. [Implementation of cytology images classification--the Bethesda 2001 System--in a group of screened women from Podlaskie region--effect evaluation].

    Zbroch, Tomasz; Knapp, Paweł Grzegorz; Knapp, Piotr Andrzej

    2007-09-01

    Increasing knowledge concerning carcinogenesis within cervical epithelium has forced us to make continues modifications of cytology classification of the cervical smears. Eventually, new descriptions of the submicroscopic cytomorphological abnormalities have enabled the implementation of Bethesda System which was meant to take place of the former Papanicolaou classification although temporarily both are sometimes used simultaneously. The aim of this study was to compare results of these two classification systems in the aspect of diagnostic accuracy verified by further tests of the diagnostic algorithm for the cervical lesion evaluation. The study was conducted in the group of women selected from general population, the criteria being the place of living and cervical cancer age risk group, in the consecutive periods of mass screening in Podlaski region. The performed diagnostic tests have been based on the commonly used algorithm, as well as identical laboratory and methodological conditions. Performed assessment revealed comparable diagnostic accuracy of both analyzing classifications, verified by histological examination, although with marked higher specificity for dysplastic lesions with decreased number of HSIL results and increased diagnosis of LSILs. Higher number of performed colposcopies and biopsies were an additional consequence of TBS classification. Results based on Bethesda System made it possible to find the sources and reasons of abnormalities with much greater precision, which enabled causing agent treatment. Two evaluated cytology classification systems, although not much different, depicted higher potential of TBS and better, more effective communication between cytology laboratory and gynecologist, making reasonable implementation of The Bethesda System in the daily cytology screening work.

  8. 5 CFR 9701.231 - Conversion of positions and employees to the DHS classification system.

    2010-01-01

    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Conversion of positions and employees to... Provisions § 9701.231 Conversion of positions and employees to the DHS classification system. (a) This... from the GS system, a prevailing rate system, the SL/ST system, or the SES system, as provided in...

  9. Reliability of a treatment-based classification system for subgrouping people with low back pain.

    Henry, Sharon M; Fritz, Julie M; Trombley, Andrea R; Bunn, Janice Y

    2012-09-01

    Observational, cross-sectional reliability study. To examine the interrater reliability of novice raters in their use of the treatment-based classification (TBC) system for low back pain and to explore the patterns of disagreement in classification errors. Although the interrater reliability of individual test items in the TBC system is moderate to good, some error persists in classification decision making. Understanding which classification errors are common could direct further refinement of the TBC system. Using previously recorded patient data (n = 24), 12 novice raters classified patients according to the TBC schema. These classification results were combined with those of 7 other raters, allowing examination of the overall agreement using the kappa statistic, as well as agreement/disagreement among pairwise comparisons in classification assignments. A chi-square test examined differences in percent agreement between the novice and more experienced raters and differences in classification distributions between these 2 groups of raters. Among 12 novice raters, there was 80.9% agreement in the pairs of classification (κ = 0.62; 95% confidence interval: 0.59, 0.65) and an overall 75.5% agreement (κ = 0.57; 95% confidence interval: 0.55, 0.69) for the combined data set. Raters were least likely to agree on a classification of stabilization (77.5% agreement). The overall percentage of pairwise classification judgments that disagreed was 24.5%, with the most common disagreement being between manipulation and stabilization (11.0%), followed by a mismatch between stabilization and specific exercise (8.2%). Additional refinement is needed to reduce rater disagreement that persists in the TBC decision-making algorithm, particularly in the stabilization category. J Orthop Sports Phys Ther 2012;42(9):797-805, Epub 7 June 2012. doi:10.2519/jospt.2012.4078.

  10. A systematic literature review of automated clinical coding and classification systems.

    Stanfill, Mary H; Williams, Margaret; Fenton, Susan H; Jenders, Robert A; Hersh, William R

    2010-01-01

    Clinical coding and classification processes transform natural language descriptions in clinical text into data that can subsequently be used for clinical care, research, and other purposes. This systematic literature review examined studies that evaluated all types of automated coding and classification systems to determine the performance of such systems. Studies indexed in Medline or other relevant databases prior to March 2009 were considered. The 113 studies included in this review show that automated tools exist for a variety of coding and classification purposes, focus on various healthcare specialties, and handle a wide variety of clinical document types. Automated coding and classification systems themselves are not generalizable, nor are the results of the studies evaluating them. Published research shows these systems hold promise, but these data must be considered in context, with performance relative to the complexity of the task and the desired outcome.

  11. Interplay of biopharmaceutics, biopharmaceutics drug disposition and salivary excretion classification systems

    Idkaidek, Nasir M.

    2013-01-01

    The aim of this commentary is to investigate the interplay of Biopharmaceutics Classification System (BCS), Biopharmaceutics Drug Disposition Classification System (BDDCS) and Salivary Excretion Classification System (SECS). BCS first classified drugs based on permeability and solubility for the purpose of predicting oral drug absorption. Then BDDCS linked permeability with hepatic metabolism and classified drugs based on metabolism and solubility for the purpose of predicting oral drug disposition. On the other hand, SECS classified drugs based on permeability and protein binding for the purpose of predicting the salivary excretion of drugs. The role of metabolism, rather than permeability, on salivary excretion is investigated and the results are not in agreement with BDDCS. Conclusion The proposed Salivary Excretion Classification System (SECS) can be used as a guide for drug salivary excretion based on permeability (not metabolism) and protein binding. PMID:24493977

  12. An indigenous soil classification system for Bellona Island - a raised atoll in the Solomon Islands

    Elberling, Bo; Breuning-Madsen, Henrik; Bruun, Thilde Bech

    2010-01-01

    One of the challenges of evaluating existing traditional farming systems is to combine local knowledge and modern scientific methods and terminology. This requires an evaluation of indigenous soil classification in modern terms. This paper focuses on an indigenous soil classification system...... perceive the same four out of seven soil types as highly useful for cultivation and rank these soil types similarly according to their suitability for different crops such as yam, watermelon, cassava and sweet potato. It is concluded that the indigenous soil classification is in line with the soil...... production potential and useful for land evaluation on Bellona....

  13. A comparison of the Web of Science with publication-level classification systems of science

    Perianes-Rodriguez, A.; Ruiz-Castillo, J.

    2016-07-01

    In this paper we propose a new criterion for choosing between a pair of classification systems of science that assign publications (or journals) to a set of scientific fields. Consider the standard normalization procedure in which field mean citations are used as normalization factors. We recommend system A over system B whenever the standard normalization procedure based on A performs better than the when it is based on B. Since the evaluation can be made in terms of either system, the performance assessment requires a double test. In addition, since the assessment of two normalization procedures would be generally biased in favor of the one based on the classification system used for evaluation purposes, ideally a pair of classification systems must be compared using a third, independent classification system for evaluation purposes. We illustrate this strategy by comparing a Web of Science journal-level classification system, consisting of 236 journal subject categories, with two publication-level algorithmically constructed classification systems consisting of 1,363 (G6) and 5,119 (G8) clusters. There are two main findings. (1) The G8 system is found to dominate the G6 system. Therefore, when we have a choice between two classification systems at different granularity levels, we should use the system at the higher level because it typically exhibits a better standard normalization performance. (2) The G8 system and the Web of Science (WoS) journal-level system are found to be non-comparable. Nevertheless, the G8-normalization procedure performs better using the WoS system for evaluation purposes than the WoS-normalization procedure using the G8 system for evaluation purposes. Furthermore, when we use the G6 system for evaluation purposes, the G8-normalization procedure performs better than the WoS-normalization procedure. We conclude that algorithmically constructed classification systems constitute a credible alternative to the WoS system and, by extension, to

  14. Rapid Classification and Identification of Multiple Microorganisms with Accurate Statistical Significance via High-Resolution Tandem Mass Spectrometry.

    Alves, Gelio; Wang, Guanghui; Ogurtsov, Aleksey Y; Drake, Steven K; Gucek, Marjan; Sacks, David B; Yu, Yi-Kuo

    2018-06-05

    Rapid and accurate identification and classification of microorganisms is of paramount importance to public health and safety. With the advance of mass spectrometry (MS) technology, the speed of identification can be greatly improved. However, the increasing number of microbes sequenced is complicating correct microbial identification even in a simple sample due to the large number of candidates present. To properly untwine candidate microbes in samples containing one or more microbes, one needs to go beyond apparent morphology or simple "fingerprinting"; to correctly prioritize the candidate microbes, one needs to have accurate statistical significance in microbial identification. We meet these challenges by using peptide-centric representations of microbes to better separate them and by augmenting our earlier analysis method that yields accurate statistical significance. Here, we present an updated analysis workflow that uses tandem MS (MS/MS) spectra for microbial identification or classification. We have demonstrated, using 226 MS/MS publicly available data files (each containing from 2500 to nearly 100,000 MS/MS spectra) and 4000 additional MS/MS data files, that the updated workflow can correctly identify multiple microbes at the genus and often the species level for samples containing more than one microbe. We have also shown that the proposed workflow computes accurate statistical significances, i.e., E values for identified peptides and unified E values for identified microbes. Our updated analysis workflow MiCId, a freely available software for Microorganism Classification and Identification, is available for download at https://www.ncbi.nlm.nih.gov/CBBresearch/Yu/downloads.html . Graphical Abstract ᅟ.

  15. Binary classification of dyslipidemia from the waist-to-hip ratio and body mass index: a comparison of linear, logistic, and CART models

    Paccaud Fred

    2004-04-01

    Full Text Available Abstract Background We sought to improve upon previously published statistical modeling strategies for binary classification of dyslipidemia for general population screening purposes based on the waist-to-hip circumference ratio and body mass index anthropometric measurements. Methods Study subjects were participants in WHO-MONICA population-based surveys conducted in two Swiss regions. Outcome variables were based on the total serum cholesterol to high density lipoprotein cholesterol ratio. The other potential predictor variables were gender, age, current cigarette smoking, and hypertension. The models investigated were: (i linear regression; (ii logistic classification; (iii regression trees; (iv classification trees (iii and iv are collectively known as "CART". Binary classification performance of the region-specific models was externally validated by classifying the subjects from the other region. Results Waist-to-hip circumference ratio and body mass index remained modest predictors of dyslipidemia. Correct classification rates for all models were 60–80%, with marked gender differences. Gender-specific models provided only small gains in classification. The external validations provided assurance about the stability of the models. Conclusions There were no striking differences between either the algebraic (i, ii vs. non-algebraic (iii, iv, or the regression (i, iii vs. classification (ii, iv modeling approaches. Anticipated advantages of the CART vs. simple additive linear and logistic models were less than expected in this particular application with a relatively small set of predictor variables. CART models may be more useful when considering main effects and interactions between larger sets of predictor variables.

  16. Efficacy measures associated to a plantar pressure based classification system in diabetic foot medicine.

    Deschamps, Kevin; Matricali, Giovanni Arnoldo; Desmet, Dirk; Roosen, Philip; Keijsers, Noel; Nobels, Frank; Bruyninckx, Herman; Staes, Filip

    2016-09-01

    The concept of 'classification' has, similar to many other diseases, been found to be fundamental in the field of diabetic medicine. In the current study, we aimed at determining efficacy measures of a recently published plantar pressure based classification system. Technical efficacy of the classification system was investigated by applying a high resolution, pixel-level analysis on the normalized plantar pressure pedobarographic fields of the original experimental dataset consisting of 97 patients with diabetes and 33 persons without diabetes. Clinical efficacy was assessed by considering the occurence of foot ulcers at the plantar aspect of the forefoot in this dataset. Classification efficacy was assessed by determining the classification recognition rate as well as its sensitivity and specificity using cross-validation subsets of the experimental dataset together with a novel cohort of 12 patients with diabetes. Pixel-level comparison of the four groups associated to the classification system highlighted distinct regional differences. Retrospective analysis showed the occurence of eleven foot ulcers in the experimental dataset since their gait analysis. Eight out of the eleven ulcers developed in a region of the foot which had the highest forces. Overall classification recognition rate exceeded 90% for all cross-validation subsets. Sensitivity and specificity of the four groups associated to the classification system exceeded respectively the 0.7 and 0.8 level in all cross-validation subsets. The results of the current study support the use of the novel plantar pressure based classification system in diabetic foot medicine. It may particularly serve in communication, diagnosis and clinical decision making. Copyright © 2016 Elsevier B.V. All rights reserved.

  17. Automated correlation and classification of secondary ion mass spectrometry images using a k-means cluster method.

    Konicek, Andrew R; Lefman, Jonathan; Szakal, Christopher

    2012-08-07

    We present a novel method for correlating and classifying ion-specific time-of-flight secondary ion mass spectrometry (ToF-SIMS) images within a multispectral dataset by grouping images with similar pixel intensity distributions. Binary centroid images are created by employing a k-means-based custom algorithm. Centroid images are compared to grayscale SIMS images using a newly developed correlation method that assigns the SIMS images to classes that have similar spatial (rather than spectral) patterns. Image features of both large and small spatial extent are identified without the need for image pre-processing, such as normalization or fixed-range mass-binning. A subsequent classification step tracks the class assignment of SIMS images over multiple iterations of increasing n classes per iteration, providing information about groups of images that have similar chemistry. Details are discussed while presenting data acquired with ToF-SIMS on a model sample of laser-printed inks. This approach can lead to the identification of distinct ion-specific chemistries for mass spectral imaging by ToF-SIMS, as well as matrix-assisted laser desorption ionization (MALDI), and desorption electrospray ionization (DESI).

  18. EULAR points to consider in the development of classification and diagnostic criteria in systemic vasculitis

    Basu, Neil; Watts, Richard; Bajema, Ingeborg

    2010-01-01

    The systemic vasculitides are multiorgan diseases where early diagnosis and treatment can significantly improve outcomes. Robust nomenclature reduces diagnostic delay. However, key aspects of current nomenclature are widely perceived to be out of date, these include disease definitions, classific......, classification and diagnostic criteria. Therefore, the aim of the present work was to identify deficiencies and provide contemporary points to consider for the development of future definitions and criteria in systemic vasculitis....

  19. A Preliminary Study on the Multiple Mapping Structure of Classification Systems for Heterogeneous Databases

    Seok-Hyoung Lee; Hwan-Min Kim; Ho-Seop Choe

    2012-01-01

    While science and technology information service portals and heterogeneous databases produced in Korea and other countries are integrated, methods of connecting the unique classification systems applied to each database have been studied. Results of technologists' research, such as, journal articles, patent specifications, and research reports, are organically related to each other. In this case, if the most basic and meaningful classification systems are not connected, it is difficult to ach...

  20. Classification of wine by determination of bioactive phenolic compounds using high resolution mass spectrometry

    Ivanova, Violeta; Dimovska, Violeta; Mitrev, Sasa; Gulaboski, Rubin; Bogeva, Elena; Petruseva, Dragana; Causon, Tim; Hann, Stephan

    2016-01-01

    In this project proposal, metabolomic fingerprinting of wine samples will be examined using high performance liquid chromatography combined with ion mobility quadruple time-of-flight mass spectrometry (HPLC–IMS-QTOF-MS) for the first time. Bioactive compounds in wines from various red and white varieties produced in Macedonia and Austria from different wine regions and different vintages will be determined for the first time using a non-targeted fingerprinting approach on this analytical plat...

  1. Binary Systems and the Initial Mass Function

    Malkov, O. Yu.

    2017-07-01

    In the present paper we discuss advantages and disadvantages of binary stars, which are important for star formation history determination. We show that to make definite conclusions of the initial mass function shape, it is necessary to study binary population well enough to correct the luminosity function for unresolved binaries; to construct the mass-luminosity relation based on wide binaries data, and to separate observational mass functions of primaries, of secondaries, and of unresolved binaries.

  2. Classification of bacteria by simultaneous methylation-solid phase microextraction and gas chromatography/mass spectrometry analysis of fatty acid methyl esters.

    Lu, Yao; Harrington, Peter B

    2010-08-01

    Direct methylation and solid-phase microextraction (SPME) were used as a sample preparation technique for classification of bacteria based on fatty acid methyl ester (FAME) profiles. Methanolic tetramethylammonium hydroxide was applied as a dual-function reagent to saponify and derivatize whole-cell bacterial fatty acids into FAMEs in one step, and SPME was used to extract the bacterial FAMEs from the headspace. Compared with traditional alkaline saponification and sample preparation using liquid-liquid extraction, the method presented in this work avoids using comparatively large amounts of inorganic and organic solvents and greatly decreases the sample preparation time as well. Characteristic gas chromatography/mass spectrometry (GC/MS) of FAME profiles was achieved for six bacterial species. The difference between Gram-positive and Gram-negative bacteria was clearly visualized with the application of principal component analysis of the GC/MS data of bacterial FAMEs. A cross-validation study using ten bootstrap Latin partitions and the fuzzy rule building expert system demonstrated 87 +/- 3% correct classification efficiency.

  3. Comparing three body mass index classification systems to assess overweight and obesity in children and adolescents Comparación de tres sistemas de clasificación de los índices de masa corporal para evaluar el sobrepeso y la obesidad en niños y adolescentes

    Ines Gonzalez-Casanova

    2013-05-01

    Full Text Available OBJECTIVE: To compare the International Obesity Task Force (IOTF 2005, Centers for Disease Control and Prevention (CDC 2000, and World Health Organization (WHO 2007 body mass index (BMI classification systems in terms of prevalence estimation and association with demographic factors. METHODS: The 18 265 children and adolescents ages 5 to 18 years (mean = 11.2 years, standard deviation = 3.9 years in the nationally representative Colombian National Nutrition Survey of 2005 were classified as overweight or obese according to IOTF, CDC, and WHO criteria. Prevalence estimates were compared according to each system and associations with age, sex, socioeconomic status, and population density were tested. RESULTS: Prevalence estimates of combined overweight and obesity differed by system (males: IOTF = 8.5%, CDC = 10.8%, WHO = 14.1%; females: IOTF = 14.6%, CDC = 13.8%, WHO = 17.1%; P OBJETIVO: Comparar los sistemas de clasificación de los índices de masa corporal (IMC del Grupo de Trabajo Internacional sobre la Obesidad (IOTF de 2005, de los Centros para el Control y la Prevención de Enfermedades (CDC de 2000, y de la Organización Mundial de la Salud (OMS de 2007, en cuanto a la estimación de la prevalencia y la asociación con factores demográficos. MÉTODOS: Los 18 265 niños y adolescentes de ambos sexos y de edades comprendidas entre 5 y 18 años (media = 11,2 años, desviación estándar = 3,9 años que participaron en la Encuesta Nacional de la Situación Nutricional en Colombia del 2005, representativa a escala nacional, fueron clasificados como afectados de sobrepeso u obesidad según los criterios del IOTF, los CDC y la OMS. Se compararon los cálculos de la prevalencia según cada sistema y se analizaron las asociaciones con la edad, el sexo, la situación socioeconómica y la densidad de población. RESULTADOS: Los cálculos de la prevalencia del sobrepeso y la obesidad combinados diferían según el sistema (varones: IOTF = 8,5%, CDC

  4. Measurement of semantic similarity for land use and land cover classification systems

    Deng, Dongpo

    2008-12-01

    Land use and land cover (LULC) data is essential to environmental and ecological research. However, semantic heterogeneous of land use and land cover classification are often resulted from different data resources, different cultural contexts, and different utilities. Therefore, there is need to develop a method to measure, compare and integrate between land cover categories. To understand the meaning and the use of terminology from different domains, the common ontology approach is used to acquire information regarding the meaning of terms, and to compare two terms to determine how they might be related. Ontology is a formal specification of a shared conceptualization of a domain of interest. LULC classification system is a ontology. The semantic similarity method is used to compare to entities of three LULC classification systems: CORINE (European Environmental Agency), Oregon State, USA), and Taiwan. The semantic properties and relations firstly have been extracted from their definitions of LULC classification systems. Then semantic properties and relations of categories in three LULC classification systems are mutually compared. The visualization of semantic proximity is finally presented to explore the similarity or dissimilarity of data. This study shows the semantic similarity method efficiently detect semantic distance in three LULC classification systems and find out the semantic similar objects.

  5. Accurate crop classification using hierarchical genetic fuzzy rule-based systems

    Topaloglou, Charalampos A.; Mylonas, Stelios K.; Stavrakoudis, Dimitris G.; Mastorocostas, Paris A.; Theocharis, John B.

    2014-10-01

    This paper investigates the effectiveness of an advanced classification system for accurate crop classification using very high resolution (VHR) satellite imagery. Specifically, a recently proposed genetic fuzzy rule-based classification system (GFRBCS) is employed, namely, the Hierarchical Rule-based Linguistic Classifier (HiRLiC). HiRLiC's model comprises a small set of simple IF-THEN fuzzy rules, easily interpretable by humans. One of its most important attributes is that its learning algorithm requires minimum user interaction, since the most important learning parameters affecting the classification accuracy are determined by the learning algorithm automatically. HiRLiC is applied in a challenging crop classification task, using a SPOT5 satellite image over an intensively cultivated area in a lake-wetland ecosystem in northern Greece. A rich set of higher-order spectral and textural features is derived from the initial bands of the (pan-sharpened) image, resulting in an input space comprising 119 features. The experimental analysis proves that HiRLiC compares favorably to other interpretable classifiers of the literature, both in terms of structural complexity and classification accuracy. Its testing accuracy was very close to that obtained by complex state-of-the-art classification systems, such as the support vector machines (SVM) and random forest (RF) classifiers. Nevertheless, visual inspection of the derived classification maps shows that HiRLiC is characterized by higher generalization properties, providing more homogeneous classifications that the competitors. Moreover, the runtime requirements for producing the thematic map was orders of magnitude lower than the respective for the competitors.

  6. Classification of premalignant pancreatic cancer mass-spectrometry data using decision tree ensembles

    Wong G William

    2008-06-01

    Full Text Available Abstract Background Pancreatic cancer is the fourth leading cause of cancer death in the United States. Consequently, identification of clinically relevant biomarkers for the early detection of this cancer type is urgently needed. In recent years, proteomics profiling techniques combined with various data analysis methods have been successfully used to gain critical insights into processes and mechanisms underlying pathologic conditions, particularly as they relate to cancer. However, the high dimensionality of proteomics data combined with their relatively small sample sizes poses a significant challenge to current data mining methodology where many of the standard methods cannot be applied directly. Here, we propose a novel methodological framework using machine learning method, in which decision tree based classifier ensembles coupled with feature selection methods, is applied to proteomics data generated from premalignant pancreatic cancer. Results This study explores the utility of three different feature selection schemas (Student t test, Wilcoxon rank sum test and genetic algorithm to reduce the high dimensionality of a pancreatic cancer proteomic dataset. Using the top features selected from each method, we compared the prediction performances of a single decision tree algorithm C4.5 with six different decision-tree based classifier ensembles (Random forest, Stacked generalization, Bagging, Adaboost, Logitboost and Multiboost. We show that ensemble classifiers always outperform single decision tree classifier in having greater accuracies and smaller prediction errors when applied to a pancreatic cancer proteomics dataset. Conclusion In our cross validation framework, classifier ensembles generally have better classification accuracies compared to that of a single decision tree when applied to a pancreatic cancer proteomic dataset, thus suggesting its utility in future proteomics data analysis. Additionally, the use of feature selection

  7. Mass defect filtering-oriented classification and precursor ions list-triggered high-resolution mass spectrometry analysis for the discovery of indole alkaloids from Uncaria sinensis.

    Pan, Huiqin; Yang, Wenzhi; Yao, Changliang; Shen, Yao; Zhang, Yibei; Shi, Xiaojian; Yao, Shuai; Wu, Wanying; Guo, Dean

    2017-09-22

    Discovery of new natural compounds is becoming increasingly challenging because of the interference from those known and abundant components. The aim of this study is to report a dereplication strategy, by integrating mass defect filtering (MDF)-oriented novelty classification and precursor ions list (PIL)-triggered high-resolution mass spectrometry analysis, and to validate it by discovering new indole alkaloids from the medicinal herb Uncaria sinensis. Rapid chromatographic separation was achieved on a Kinetex ® EVO C18 column (<16min). An in-house MDF algorithm, developed based on the informed phytochemistry information and molecular design, could more exactly screen the target alkaloids and divide them into three novelty levels: Known (KN), Unknown-but-Predicted (UP), and Unexpected (UN). A hybrid data acquisition method, namely PIL-triggered collision-induced dissociation-MS 2 and high-energy C-trap dissociation-MS 3 with dynamic exclusion on a linear ion trap/Orbitrap mass spectrometer, facilitated the acquisition of diverse product ions sufficient for the structural elucidation of both indole alkaloids and the N-oxides. Ultimately, 158 potentially new alkaloids, including 10 UP and 108 UN, were rapidly characterized from the stem, leaf, and flower of U. sinensis. Two new alkaloid compounds thereof were successfully isolated and identified by 1D and 2D NMR analyses. The varied ring E and novel alkaloid-acylquinic acid conjugates were first reported from the whole Uncaria genus. Conclusively, it is a practical chemical dereplication strategy that can enhance the efficiency and has the potential to be a routine approach for the discovery of new natural compounds. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. A radiographic classification system in juvenile rheumatoid arthritis applied to the knee

    Dale, K.; Paus, A.C.; Laires, K.

    1994-01-01

    A new radiographic grading system for evaluation of juvenile rheumatoid arthritis (JRA) for the knee is presented. The classification is based on known arthritic criteria in childhood. Joints with erosion are given a higher score than growth disturbances alone. Signs of osteoarthrosis including joint space narrowing were excluded from the classification. The femorotibial and patello-femoral joints are assessed together. Verbal definitions are used for the classification, but, regarding the erosions, standard reference films are used. The intra- and inter-observer variations of the method were low. (P < 0.01) (orig.)

  9. Artificial neural net system for interactive tissue classification with MR imaging and image segmentation

    Clarke, L.P.; Silbiger, M.; Naylor, C.; Brown, K.

    1990-01-01

    This paper reports on the development of interactive methods for MR tissue classification that permit mathematically rigorous methods for three-dimensional image segmentation and automatic organ/tumor contouring, as required for surgical and RTP planning. The authors investigate a number of image-intensity based tissue- classification methods that make no implicit assumptions on the MR parameters and hence are not limited by image data set. Similarly, we have trained artificial neural net (ANN) systems for both supervised and unsupervised tissue classification

  10. British athletics muscle injury classification: a reliability study for a new grading system

    Patel, A.; Chakraverty, J.; Pollock, N.; Chakraverty, R.; Suokas, A.K.; James, S.L.

    2015-01-01

    Aim: To implement and validate the newly proposed British athletics muscle injury classification in the assessment of hamstring injuries in track and field athletes and to analyse the nature and frequency of the discrepancies. Materials and methods: This was a retrospective study analysing hamstring injuries in elite British athletes using the proposed classification system. Classification of 65 hamstring injuries in 45 high-level athletes by two radiologists at two time points 4 months apart to determine interrater variability, intrarater variability, and feasibility of the classification system was undertaken. Results: Interrater Kappa values of 0.80 (95% confidence interval [CI]: 0.67–0.92; p<0.0001) for Round 1 and 0.88 (95% CI: 0.76–1.00; p<0.0001) for Round 2 of the review were observed. Percentages of agreement were 85% for Round 1 and 91% for Round 2. The intrarater Kappa value for the two reviewers were 0.76 (95% CI: 0.63–0.88; p<0.0001) and 0.65 (95% CI: 0.53–0.76; p<0.0001) and the average was 0.71 suggesting substantial overall agreement. The percentages of agreement were 82% and 72%, respectively. Conclusions: This classification system is straightforward to use and produces both reproducible and consistent results based on interrater and intrarater Kappa values with at least substantial agreement in all groups. Further work is ongoing to investigate whether individual grades within this classification system provide prognostic information and could guide clinical management. - Highlights: • This classification system is based on MRI parameters shown to have prognostic relevance. • It is simple to use, reproducible and clinically relevant which will enhance clinical practice. • Once clinicians are familiar with the classification inter & intrarater reliability will improve.

  11. Inter- and intrareader variability in the interpretation of two radiographic classification systems for juvenile rheumatoid arthritis

    Doria, Andrea S.; Castro, Claudio C. de; Sernik, Renato A.; Vitule, Luis F.; Arantes, Paula R.; Lucato, Leandro; Germano, Marco A.N.; Cerri, Giovanni G.; Kiss, Maria Helena B.; Silva, Carlos H.M.; Zerbini, Cristiano A.F.

    2003-01-01

    To evaluate the inter- and intrareader variability for interpretation of a modified Larsen's radiographic classification system for juvenile rheumatoid arthritis (JRA) focused on osteochondral lesions and a conventional Larsen's classification system, compared to a reference MR scoring system of corresponding images. Seventy-five radiographs of 60 children with JRA, performed within a short interval of time from the MR examinations, were independently evaluated by three experienced radiologists, three diagnostic imaging residents and three rheumatologists, in two separate sessions, according to the two different classification methods, blinded to the corresponding MR images. The inter- and intrareader concordance rates between the two radiographic classification systems and the MR-related radiographs were respectively poor and poor/moderate. The interobserver range of weighted kappa values for the conventional and the modified Larsen's system respectively was 0.25-0.37 vs 0.19-0.39 for radiologists, 0.25-0.37 vs 0.18-0.30 for residents and 0.19-0.51 vs 0.17-0.29 for rheumatologists. The intrareader rate ranged from 0.17-0.55 for radiologists, 0.2-0.56 for residents, and 0.14-0.59 for rheumatologists. Although the proposal of a new radiographic classification system for JRA focused on osteochondral abnormalities sounds promising, the low inter- and intrareader concordance rates with an MR-related radiographic system makes the clinical applicability of such a radiographic system less suitable. (orig.)

  12. A Preliminary Study on the Multiple Mapping Structure of Classification Systems for Heterogeneous Databases

    Seok-Hyoung Lee

    2012-06-01

    Full Text Available While science and technology information service portals and heterogeneous databases produced in Korea and other countries are integrated, methods of connecting the unique classification systems applied to each database have been studied. Results of technologists' research, such as, journal articles, patent specifications, and research reports, are organically related to each other. In this case, if the most basic and meaningful classification systems are not connected, it is difficult to achieve interoperability of the information and thus not easy to implement meaningful science technology information services through information convergence. This study aims to address the aforementioned issue by analyzing mapping systems between classification systems in order to design a structure to connect a variety of classification systems used in the academic information database of the Korea Institute of Science and Technology Information, which provides science and technology information portal service. This study also aims to design a mapping system for the classification systems to be applied to actual science and technology information services and information management systems.

  13. Dynamic classification system in large-scale supervision of energy efficiency in buildings

    Kiluk, S.

    2014-01-01

    Highlights: • Rough set approximation of classification improves energy efficiency prediction. • Dynamic features of diagnostic classification allow for its precise prediction. • Indiscernibility in large population enhances identification of process features. • Diagnostic information can be refined by dynamic references to local neighbourhood. • We introduce data exploration validation based on system dynamics and uncertainty. - Abstract: Data mining and knowledge discovery applied to the billing data provide the diagnostic instruments for the evaluation of energy use in buildings connected to a district heating network. To ensure the validity of an algorithm-based classification system, the dynamic properties of a sequence of partitions for consecutive detected events were investigated. The information regarding the dynamic properties of the classification system refers to the similarities between the supervised objects and migrations that originate from the changes in the building energy use and loss similarity to their neighbourhood and thus represents the refinement of knowledge. In this study, we demonstrate that algorithm-based diagnostic knowledge has dynamic properties that can be exploited with a rough set predictor to evaluate whether the implementation of classification for supervision of energy use aligns with the dynamics of changes of district heating-supplied building properties. Moreover, we demonstrate the refinement of the current knowledge with the previous findings and we present the creation of predictive diagnostic systems based on knowledge dynamics with a satisfactory level of classification errors, even for non-stationary data

  14. Classification of breast masses in ultrasound images using self-adaptive differential evolution extreme learning machine and rough set feature selection.

    Prabusankarlal, Kadayanallur Mahadevan; Thirumoorthy, Palanisamy; Manavalan, Radhakrishnan

    2017-04-01

    A method using rough set feature selection and extreme learning machine (ELM) whose learning strategy and hidden node parameters are optimized by self-adaptive differential evolution (SaDE) algorithm for classification of breast masses is investigated. A pathologically proven database of 140 breast ultrasound images, including 80 benign and 60 malignant, is used for this study. A fast nonlocal means algorithm is applied for speckle noise removal, and multiresolution analysis of undecimated discrete wavelet transform is used for accurate segmentation of breast lesions. A total of 34 features, including 29 textural and five morphological, are applied to a [Formula: see text]-fold cross-validation scheme, in which more relevant features are selected by quick-reduct algorithm, and the breast masses are discriminated into benign or malignant using SaDE-ELM classifier. The diagnosis accuracy of the system is assessed using parameters, such as accuracy (Ac), sensitivity (Se), specificity (Sp), positive predictive value (PPV), negative predictive value (NPV), Matthew's correlation coefficient (MCC), and area ([Formula: see text]) under receiver operating characteristics curve. The performance of the proposed system is also compared with other classifiers, such as support vector machine and ELM. The results indicated that the proposed SaDE algorithm has superior performance with [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text], [Formula: see text], and [Formula: see text] compared to other classifiers.

  15. Rapid fingerprinting and classification of extra virgin olive oil by microjet sampling and extractive electrospray ionization mass spectrometry.

    Law, Wai Siang; Chen, Huan Wen; Balabin, Roman; Berchtold, Christian; Meier, Lukas; Zenobi, Renato

    2010-04-01

    Microjet sampling in combination with extractive electrospray ionization (EESI) mass spectrometry (MS) was applied to the rapid characterization and classification of extra virgin olive oil (EVOO) without any sample pretreatment. When modifying the composition of the primary ESI spray solvent, mass spectra of an identical EVOO sample showed differences. This demonstrates the capability of this technique to extract molecules with varying polarities, hence generating rich molecular information of the EVOO. Moreover, with the aid of microjet sampling, compounds of different volatilities (e.g.E-2-hexenal, trans-trans-2,4-heptadienal, tyrosol and caffeic acid) could be sampled simultaneously. EVOO data was also compared with that of other edible oils. Principal Component Analysis (PCA) was performed to discriminate EVOO and EVOO adulterated with edible oils. Microjet sampling EESI-MS was found to be a simple, rapid (less than 2 min analysis time per sample) and powerful method to obtain MS fingerprints of EVOO without requiring any complicated sample pretreatment steps.

  16. Classification of photobacteria associated with spoilage of fish products by numerical taxanomy and pyrolysis mass spectrometry

    Dalgaard, Paw; Manfio, G.P.; Goodfellow, M.

    1997-01-01

    , from spoiled products and by using a specific detection method. The data were analysed using the similarity coefficient and the unweighted pair-group with arithmetic averages algorithm. In addition twenty-six of the fish isolates and five reference strains were analysed by Curie-point pyrolysis mass...... sub-groups. One sub-group of psychrotolerant P. phosphoreum strains, which was selected in modified atmosphere packed fish stored at low temperature, was also highlighted using each of the methods. The importance of classifying food spoilage bacteria has been shown and a simple key generated......Forty strains of luminous and non-luminous Photobacterium phosphoreum isolates from cod (Gadus morhua) and seven reference strains of psychrotolerant and mesophilic photobacteria were examined for 156 unit characters in a numerical taxonomic study. The fish strains were isolated from the intestines...

  17. Approaches to the classification of brands of professional football clubs in the system of sportive marketing

    Romat, E.; Ostroverh, S.

    2014-01-01

    This article was told about methods of classification of professional football clubs in the system of sportive marketing in the total commercial conditions of the most popular kind sport, football. Also was told about importance of brand in the professional football club as an active method of increasing trade value multi-functional enterprise in the sport area, which works on business model. The criterions where proposed and also was told about essence of the classification, which is used to...

  18. Osteochondritis dissecans of the humeral capitellum: reliability of four classification systems using radiographs and computed tomography.

    Claessen, Femke M A P; van den Ende, Kimberly I M; Doornberg, Job N; Guitton, Thierry G; Eygendaal, Denise; van den Bekerom, Michel P J

    2015-10-01

    The radiographic appearance of osteochondritis dissecans (OCD) of the humeral capitellum varies according to the stage of the lesion. It is important to evaluate the stage of OCD lesion carefully to guide treatment. We compared the interobserver reliability of currently used classification systems for OCD of the humeral capitellum to identify the most reliable classification system. Thirty-two musculoskeletal radiologists and orthopaedic surgeons specialized in elbow surgery from several countries evaluated anteroposterior and lateral radiographs and corresponding computed tomography (CT) scans of 22 patients to classify the stage of OCD of the humeral capitellum according to the classification systems developed by (1) Minami, (2) Berndt and Harty, (3) Ferkel and Sgaglione, and (4) Anderson on a Web-based study platform including a Digital Imaging and Communications in Medicine viewer. Magnetic resonance imaging was not evaluated as part of this study. We measured agreement among observers using the Siegel and Castellan multirater κ. All OCD classification systems, except for Berndt and Harty, which had poor agreement among observers (κ = 0.20), had fair interobserver agreement: κ was 0.27 for the Minami, 0.23 for Anderson, and 0.22 for Ferkel and Sgaglione classifications. The Minami Classification was significantly more reliable than the other classifications (P reliable for classifying different stages of OCD of the humeral capitellum. However, it is unclear whether radiographic evidence of OCD of the humeral capitellum, as categorized by the Minami Classification, guides treatment in clinical practice as a result of this fair agreement. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  19. Virtual Sensor of Surface Electromyography in a New Extensive Fault-Tolerant Classification System.

    de Moura, Karina de O A; Balbinot, Alexandre

    2018-05-01

    A few prosthetic control systems in the scientific literature obtain pattern recognition algorithms adapted to changes that occur in the myoelectric signal over time and, frequently, such systems are not natural and intuitive. These are some of the several challenges for myoelectric prostheses for everyday use. The concept of the virtual sensor, which has as its fundamental objective to estimate unavailable measures based on other available measures, is being used in other fields of research. The virtual sensor technique applied to surface electromyography can help to minimize these problems, typically related to the degradation of the myoelectric signal that usually leads to a decrease in the classification accuracy of the movements characterized by computational intelligent systems. This paper presents a virtual sensor in a new extensive fault-tolerant classification system to maintain the classification accuracy after the occurrence of the following contaminants: ECG interference, electrode displacement, movement artifacts, power line interference, and saturation. The Time-Varying Autoregressive Moving Average (TVARMA) and Time-Varying Kalman filter (TVK) models are compared to define the most robust model for the virtual sensor. Results of movement classification were presented comparing the usual classification techniques with the method of the degraded signal replacement and classifier retraining. The experimental results were evaluated for these five noise types in 16 surface electromyography (sEMG) channel degradation case studies. The proposed system without using classifier retraining techniques recovered of mean classification accuracy was of 4% to 38% for electrode displacement, movement artifacts, and saturation noise. The best mean classification considering all signal contaminants and channel combinations evaluated was the classification using the retraining method, replacing the degraded channel by the virtual sensor TVARMA model. This method

  20. Terminology and classification aspects of the Bethesda System for Reporting Thyroid Cytopathology

    G V Semkina

    2012-12-01

    Full Text Available The article is devoted to the relevance of Betesda System for Reporting Thyroid Cytopathology. This article summarizes recent data on the main differences and advantages of new classification system. Application of the Betesda System for Reporting Thyroid Cytopathology leads to the increased sensitivity and specificity of FNA.

  1. Global Stress Classification System for Materials Used in Solar Energy Applications

    Slamova, Karolina; Schill, Christian; Herrmann, Jan; Datta, Pawan; Chih Wang, Chien

    2016-08-01

    Depending on the geographical location, the individual or combined impact of environmental stress factors and corresponding performance losses for solar applications varies significantly. Therefore, as a strategy to reduce investment risks and operating and maintenance costs, it is necessary to adapt the materials and components of solar energy systems specifically to regional environmental conditions. The project «GloBe Solar» supports this strategy by focusing on the development of a global stress classification system for materials in solar energy applications. The aim of this classification system is to assist in the identification of the individual stress conditions for every location on the earth's surface. The stress classification system could serve as a decision support tool for the industry (manufacturers, investors, lenders and project developers) and help to improve knowledge and services that can provide higher confidence to solar power systems.

  2. Applying inventory classification to a large inventory management system

    Benjamin Isaac May

    2017-06-01

    Full Text Available Inventory classification aims to ensure that business-driving inventory items are efficiently managed in spite of constrained resources. There are numerous single- and multiple-criteria approaches to it. Our objective is to improve resource allocation to focus on items that can lead to high equipment availability. This concern is typical of many service industries such as military logistics, airlines, amusement parks and public works. Our study tests several inventory prioritization techniques and finds that a modified multi-criterion weighted non-linear optimization (WNO technique is a powerful approach for classifying inventory, outperforming traditional techniques of inventory prioritization such as ABC analysis in a variety of performance objectives.

  3. An Expert System for Diagnosis of Sleep Disorder Using Fuzzy Rule-Based Classification Systems

    Septem Riza, Lala; Pradini, Mila; Fitrajaya Rahman, Eka; Rasim

    2017-03-01

    Sleep disorder is an anomaly that could cause problems for someone’ sleeping pattern. Nowadays, it becomes an issue since people are getting busy with their own business and have no time to visit the doctors. Therefore, this research aims to develop a system used for diagnosis of sleep disorder using Fuzzy Rule-Based Classification System (FRBCS). FRBCS is a method based on the fuzzy set concepts. It consists of two steps: (i) constructing a model/knowledge involving rulebase and database, and (ii) prediction over new data. In this case, the knowledge is obtained from experts whereas in the prediction stage, we perform fuzzification, inference, and classification. Then, a platform implementing the method is built with a combination between PHP and the R programming language using the “Shiny” package. To validate the system that has been made, some experiments have been done using data from a psychiatric hospital in West Java, Indonesia. Accuracy of the result and computation time are 84.85% and 0.0133 seconds, respectively.

  4. A new approach to develop computer-aided diagnosis scheme of breast mass classification using deep learning technology.

    Qiu, Yuchen; Yan, Shiju; Gundreddy, Rohith Reddy; Wang, Yunzhi; Cheng, Samuel; Liu, Hong; Zheng, Bin

    2017-01-01

    To develop and test a deep learning based computer-aided diagnosis (CAD) scheme of mammograms for classifying between malignant and benign masses. An image dataset involving 560 regions of interest (ROIs) extracted from digital mammograms was used. After down-sampling each ROI from 512×512 to 64×64 pixel size, we applied an 8 layer deep learning network that involves 3 pairs of convolution-max-pooling layers for automatic feature extraction and a multiple layer perceptron (MLP) classifier for feature categorization to process ROIs. The 3 pairs of convolution layers contain 20, 10, and 5 feature maps, respectively. Each convolution layer is connected with a max-pooling layer to improve the feature robustness. The output of the sixth layer is fully connected with a MLP classifier, which is composed of one hidden layer and one logistic regression layer. The network then generates a classification score to predict the likelihood of ROI depicting a malignant mass. A four-fold cross validation method was applied to train and test this deep learning network. The results revealed that this CAD scheme yields an area under the receiver operation characteristic curve (AUC) of 0.696±0.044, 0.802±0.037, 0.836±0.036, and 0.822±0.035 for fold 1 to 4 testing datasets, respectively. The overall AUC of the entire dataset is 0.790±0.019. This study demonstrates the feasibility of applying a deep learning based CAD scheme to classify between malignant and benign breast masses without a lesion segmentation, image feature computation and selection process.

  5. A New Approach to Develop Computer-aided Diagnosis Scheme of Breast Mass Classification Using Deep Learning Technology

    Qiu, Yuchen; Yan, Shiju; Gundreddy, Rohith Reddy; Wang, Yunzhi; Cheng, Samuel; Liu, Hong; Zheng, Bin

    2017-01-01

    PURPOSE To develop and test a deep learning based computer-aided diagnosis (CAD) scheme of mammograms for classifying between malignant and benign masses. METHODS An image dataset involving 560 regions of interest (ROIs) extracted from digital mammograms was used. After down-sampling each ROI from 512×512 to 64×64 pixel size, we applied an 8 layer deep learning network that involves 3 pairs of convolution-max-pooling layers for automatic feature extraction and a multiple layer perceptron (MLP) classifier for feature categorization to process ROIs. The 3 pairs of convolution layers contain 20, 10, and 5 feature maps, respectively. Each convolution layer is connected with a max-pooling layer to improve the feature robustness. The output of the sixth layer is fully connected with a MLP classifier, which is composed of one hidden layer and one logistic regression layer. The network then generates a classification score to predict the likelihood of ROI depicting a malignant mass. A four-fold cross validation method was applied to train and test this deep learning network. RESULTS The results revealed that this CAD scheme yields an area under the receiver operation characteristic curve (AUC) of 0.696±0.044, 0.802±0.037, 0.836±0.036, and 0.822±0.035 for fold 1 to 4 testing datasets, respectively. The overall AUC of the entire dataset is 0.790±0.019. CONCLUSIONS This study demonstrates the feasibility of applying a deep learning based CAD scheme to classify between malignant and benign breast masses without a lesion segmentation, image feature computation and selection process. PMID:28436410

  6. Classification of transportation packaging and dry spent fuel storage system components according to importance to safety

    Tyacke, M.J.; McConnell, J.W. Jr.; Ayers, A.L. Jr.; O'Connor, S.C.; Jankovich, J.P.

    1996-01-01

    The Idaho National Engineering Laboratory prepared a technical report for the Office of Nuclear Material Safety and Safeguards of the US Nuclear Regulatory Commission, entitled Classification of Transportation Packaging and Dry Spent Fuel Storage System Components According to Importance to Safety, NUREG/CR-6407. This paper provides the results of that report. It also presents the graded approach for classification of components used in transportation packagings and dry spent fuel storage systems. This approach provides a method for identifying the classification of components according to importance to safety within transportation packagings and dry spent fuel storage systems. Record retention requirements are discussed to identify the documentation necessary to validate that the individual components were fabricated in accordance with their assigned classification. A review of the existing regulations pertaining to transportation packagings and dry storage systems was performed to identify current requirements. The general types of transportation packagings and dry storage systems are identified. The methodology used in this paper is based on Regulatory Guide 7.10, Establishing Quality Assurance Programs for Packaging Used in the Transport of Radioactive Material. This paper also includes a list of generic components for each of the general types of transportation packagings and spent fuel storage systems, with a classification category assigned to each component. Several examples concerning the safety importance of components are presented

  7. Evaluation of the Waste Isolation Pilot Plant classification of systems, structures and components

    1985-07-01

    A review of the classification system for systems, structures, and components at the Waste Isolation Pilot Plant (WIPP) was performed using the WIPP Safety Analysis Report (SAR) and Bechtel document D-76-D-03 as primary source documents. The regulations of the US Nuclear Regulatory Commission (NRC) covering ''Disposal of High level Radioactive Wastes in Geologic Repositories,'' 10 CFR 60, and the regulations relevant to nuclear power plant siting and construction (10 CFR 50, 51, 100) were used as standards to evaluate the WIPP design classification system, although it is recognized that the US Department of Energy (DOE) is not required to comply with these NRC regulations in the design and construction of WIPP. The DOE General Design Criteria Manual (DOE Order 6430.1) and the Safety Analysis and Review System for AL Operation document (AL 54f81.1A) were reviewed in part. This report includes a discussion of the historical basis for nuclear power plant requirements, a review of WIPP and nuclear power plant classification bases, and a comparison of the codes and standards applicable to each quality level. Observations made during the review of the WIPP SAR are noted in the text of this reoport. The conclusions reached by this review are: WIPP classification methodology is comparable to corresponding nuclear power procedures. The classification levels assigned to WIPP systems are qualitatively the same as those assigned to nuclear power plant systems

  8. The development of the globally harmonized system (GHS) of classification and labelling of hazardous chemicals

    Winder, Chris; Azzi, Rola; Wagner, Drew

    2005-01-01

    The hazards of chemicals can be classified using classification criteria that are based on physical, chemical and ecotoxicological endpoints. These criteria may be developed be iteratively, based on scientific or regulatory processes. A number of national and international schemes have been developed over the past 50 years, and some, such as the UN Dangerous Goods system or the EC system for hazardous substances, are in widespread use. However, the unnecessarily complicated multiplicity of existing hazard classifications created much unnecessary confusion at the user level, and a recommendation was made at the 1992 Rio Earth summit to develop a globally harmonized chemical hazard classification and compatible labelling system, including material safety data sheets and easily understandable symbols, that could be used for manufacture, transport, use and disposal of chemical substances. This became the globally harmonized system for the Classification and Labelling of Chemicals (GHS). The developmental phase of the GHS is largely complete. Consistent criteria for categorising chemicals according to their toxic, physical, chemical and ecological hazards are now available. Consistent hazard communication tools such as labelling and material safety data sheets are also close to finalisation. The next phase is implementation of the GHS. The Intergovernmental Forum for Chemical Safety recommends that all countries implement the GHS as soon as possible with a view to have the system fully operational by 2008. When the GHS is in place, the world will finally have one system for classification of chemical hazards

  9. Top-quark mass coupling and classification of weakly coupled heterotic superstring vacua

    Rizos, J.

    2014-01-01

    The quest for the Standard Model among the huge number of string vacua is usually based on a set of phenomenological criteria related to the massless spectrum of string models. In this work we study criteria associated with interactions in the effective low energy theory and in particular with the presence of the coupling that provides mass to the top quark. Working in the context of the free-fermionic formulation of the heterotic superstring, we demonstrate that, in a big class of phenomenologically promising Z 2 x Z 2 compactifications, these criteria can be expressed entirely in terms of the generalised GSO projection coefficients entering the definition of the models. They are shown to be very efficient in identifying phenomenologically viable vacua, especially in the framework of computer-based search, as they are met by approximately one every 10 4 models. We apply our results in the investigation of a class of supersymmetric Pati-Salam vacua, comprising 10 16 configurations, and we show that when combined with other phenomenological requirements they lead to a relatively small set of about 10 7 Standard Model compatible models that can be fully classified. (orig.)

  10. Top-quark mass coupling and classification of weakly coupled heterotic superstring vacua

    Rizos, J.

    2014-06-01

    The quest for the Standard Model among the huge number of string vacua is usually based on a set of phenomenological criteria related to the massless spectrum of string models. In this work we study criteria associated with interactions in the effective low energy theory and in particular with the presence of the coupling that provides mass to the top quark. Working in the context of the free-fermionic formulation of the heterotic superstring, we demonstrate that, in a big class of phenomenologically promising compactifications, these criteria can be expressed entirely in terms of the generalised GSO projection coefficients entering the definition of the models. They are shown to be very efficient in identifying phenomenologically viable vacua, especially in the framework of computer-based search, as they are met by approximately one every models. We apply our results in the investigation of a class of supersymmetric Pati-Salam vacua, comprising configurations, and we show that when combined with other phenomenological requirements they lead to a relatively small set of about Standard Model compatible models that can be fully classified.

  11. Effect of Electrode Geometry on the Classification Performance of Rapid Evaporative Ionization Mass Spectrometric (REIMS) Bacterial Identification

    Bodai, Zsolt; Cameron, Simon; Bolt, Frances; Simon, Daniel; Schaffer, Richard; Karancsi, Tamas; Balog, Julia; Rickards, Tony; Burke, Adam; Hardiman, Kate; Abda, Julia; Rebec, Monica; Takats, Zoltan

    2018-01-01

    The recently developed automated, high-throughput monopolar REIMS platform is suited for the identification of clinically important microorganisms. Although already comparable to the previously reported bipolar forceps method, optimization of the geometry of monopolar electrodes, at the heart of the system, holds the most scope for further improvements to be made. For this, sharp tip and round shaped electrodes were optimized to maximize species-level classification accuracy. Following optimization of the distance between the sample contact point and tube inlet with the sharp tip electrodes, the overall cross-validation accuracy improved from 77% to 93% in negative and from 33% to 63% in positive ion detection modes, compared with the original 4 mm distance electrode. As an alternative geometry, round tube shaped electrodes were developed. Geometry optimization of these included hole size, number, and position, which were also required to prevent plate pick-up due to vacuum formation. Additional features, namely a metal "X"-shaped insert and a pin in the middle were included to increase the contact surface with a microbial biomass to maximize aerosol production. Following optimization, cross-validation scores showed improvement in classification accuracy from 77% to 93% in negative and from 33% to 91% in positive ion detection modes. Supervised models were also built, and after the leave 20% out cross-validation, the overall classification accuracy was 98.5% in negative and 99% in positive ion detection modes. This suggests that the new generation of monopolar REIMS electrodes could provide substantially improved species level identification accuracies in both polarity detection modes. [Figure not available: see fulltext.

  12. Classification of cultivation locations of Panax quinquefolius L samples using high performance liquid chromatography-electrospray ionization mass spectrometry and chemometric analysis

    Panax quinquefolius L (P. quinquefolius L) samples grown in the United States and China were analyzed with high performance liquid chromatography-mass spectrometry (HPLC—MS). Prior to classification, the two-way datasets were subjected to pretreatment including baseline correction and retention tim...

  13. Evaluation of Urinary Tract Dilation Classification System for Grading Postnatal Hydronephrosis.

    Hodhod, Amr; Capolicchio, John-Paul; Jednak, Roman; El-Sherif, Eid; El-Doray, Abd El-Alim; El-Sherbiny, Mohamed

    2016-03-01

    We assessed the reliability and validity of the Urinary Tract Dilation classification system as a new grading system for postnatal hydronephrosis. We retrospectively reviewed charts of patients who presented with hydronephrosis from 2008 to 2013. We included patients diagnosed prenatally and those with hydronephrosis discovered incidentally during the first year of life. We excluded cases involving urinary tract infection, neurogenic bladder and chromosomal anomalies, those associated with extraurinary congenital malformations and those with followup of less than 24 months without resolution. Hydronephrosis was graded postnatally using the Society for Fetal Urology system, and then the management protocol was chosen. All units were regraded using the Urinary Tract Dilation classification system and compared to the Society for Fetal Urology system to assess reliability. Univariate and multivariate analyses were performed to assess the validity of the Urinary Tract Dilation classification system in predicting hydronephrosis resolution and surgical intervention. A total of 490 patients (730 renal units) were eligible to participate. The Urinary Tract Dilation classification system was reliable in the assessment of hydronephrosis (parallel forms 0.92). Hydronephrosis resolved in 357 units (49%), and 86 units (12%) were managed by surgical intervention. The remainder of renal units demonstrated stable or improved hydronephrosis. Multivariate analysis revealed that the likelihood of surgical intervention was predicted independently by Urinary Tract Dilation classification system risk group, while Society for Fetal Urology grades were predictive of likelihood of resolution. The Urinary Tract Dilation classification system is reliable for evaluation of postnatal hydronephrosis and is valid in predicting surgical intervention. Copyright © 2016 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

  14. An approach for classification of hydrogeological systems at the regional scale based on groundwater hydrographs

    Haaf, Ezra; Barthel, Roland

    2016-04-01

    When assessing hydrogeological conditions at the regional scale, the analyst is often confronted with uncertainty of structures, inputs and processes while having to base inference on scarce and patchy data. Haaf and Barthel (2015) proposed a concept for handling this predicament by developing a groundwater systems classification framework, where information is transferred from similar, but well-explored and better understood to poorly described systems. The concept is based on the central hypothesis that similar systems react similarly to the same inputs and vice versa. It is conceptually related to PUB (Prediction in ungauged basins) where organization of systems and processes by quantitative methods is intended and used to improve understanding and prediction. Furthermore, using the framework it is expected that regional conceptual and numerical models can be checked or enriched by ensemble generated data from neighborhood-based estimators. In a first step, groundwater hydrographs from a large dataset in Southern Germany are compared in an effort to identify structural similarity in groundwater dynamics. A number of approaches to group hydrographs, mostly based on a similarity measure - which have previously only been used in local-scale studies, can be found in the literature. These are tested alongside different global feature extraction techniques. The resulting classifications are then compared to a visual "expert assessment"-based classification which serves as a reference. A ranking of the classification methods is carried out and differences shown. Selected groups from the classifications are related to geological descriptors. Here we present the most promising results from a comparison of classifications based on series correlation, different series distances and series features, such as the coefficients of the discrete Fourier transform and the intrinsic mode functions of empirical mode decomposition. Additionally, we show examples of classes

  15. Development of an intelligent system for ultrasonic flaw classification in weldments

    Song, Sung-Jin; Kim, Hak-Joon; Cho, Hyeon

    2002-01-01

    Even though ultrasonic pattern recognition is considered as the most effective and promising approach to flaw classification in weldments, its application to the realistic field inspection is still very limited due to the crucial barriers in cost, time and reliability. To reduce such barriers, previously we have proposed an intelligent system approach that consisted of the following four ingredients: (1) a PC-based ultrasonic testing (PC-UT) system; (2) an effective invariant ultrasonic flaw classification algorithm; (3) an intelligent flaw classification software; and (4) a database with abundant experimental flaw signals. In the present work, for performing the ultrasonic flaw classification in weldments in a real-time fashion in many real word situations, we develop an intelligent system, which is called the 'Intelligent Ultrasonic Evaluation System (IUES)' by the integration of the above four ingredients into a single, unified system. In addition, for the improvement of classification accuracy of flaws, especially slag inclusions, we expand the feature set by adding new informative features, and demonstrate the enhanced performance of the IUES with flaw signals in the database constructed previously. And then, to take care of the increased redundancy in the feature set due to the addition of features, we also propose two efficient schemes for feature selection: the forward selection with trial and error, and the forward selection with criteria of the error probability and the linear correlation coefficients of individual features

  16. Cognitive-motivational deficits in ADHD: development of a classification system.

    Gupta, Rashmi; Kar, Bhoomika R; Srinivasan, Narayanan

    2011-01-01

    The classification systems developed so far to detect attention deficit/hyperactivity disorder (ADHD) do not have high sensitivity and specificity. We have developed a classification system based on several neuropsychological tests that measure cognitive-motivational functions that are specifically impaired in ADHD children. A total of 240 (120 ADHD children and 120 healthy controls) children in the age range of 6-9 years and 32 Oppositional Defiant Disorder (ODD) children (aged 9 years) participated in the study. Stop-Signal, Task-Switching, Attentional Network, and Choice Delay tests were administered to all the participants. Receiver operating characteristic (ROC) analysis indicated that percentage choice of long-delay reward best classified the ADHD children from healthy controls. Single parameters were not helpful in making a differential classification of ADHD with ODD. Multinominal logistic regression (MLR) was performed with multiple parameters (data fusion) that produced improved overall classification accuracy. A combination of stop-signal reaction time, posterror-slowing, mean delay, switch cost, and percentage choice of long-delay reward produced an overall classification accuracy of 97.8%; with internal validation, the overall accuracy was 92.2%. Combining parameters from different tests of control functions not only enabled us to accurately classify ADHD children from healthy controls but also in making a differential classification with ODD. These results have implications for the theories of ADHD.

  17. Optimization of Neuro-Fuzzy System Using Genetic Algorithm for Chromosome Classification

    M. Sarosa

    2013-09-01

    Full Text Available Neuro-fuzzy system has been shown to provide a good performance on chromosome classification but does not offer a simple method to obtain the accurate parameter values required to yield the best recognition rate. This paper presents a neuro-fuzzy system where its parameters can be automatically adjusted using genetic algorithms. The approach combines the advantages of fuzzy logic theory, neural networks, and genetic algorithms. The structure consists of a four layer feed-forward neural network that uses a GBell membership function as the output function. The proposed methodology has been applied and tested on banded chromosome classification from the Copenhagen Chromosome Database. Simulation result showed that the proposed neuro-fuzzy system optimized by genetic algorithms offers advantages in setting the parameter values, improves the recognition rate significantly and decreases the training/testing time which makes genetic neuro-fuzzy system suitable for chromosome classification.

  18. Classification of Aeronautics System Health and Safety Documents

    National Aeronautics and Space Administration — Most complex aerospace systems have many text reports on safety, maintenance, and associated issues. The Aviation Safety Reporting System (ASRS) spans several...

  19. Classification of the medicinal plants of the genus Atractylodes using high-performance liquid chromatography with diode array and tandem mass spectrometry detection combined with multivariate statistical analysis.

    Cho, Hyun-Deok; Kim, Unyong; Suh, Joon Hyuk; Eom, Han Young; Kim, Junghyun; Lee, Seul Gi; Choi, Yong Seok; Han, Sang Beom

    2016-04-01

    Analytical methods using high-performance liquid chromatography with diode array and tandem mass spectrometry detection were developed for the discrimination of the rhizomes of four Atractylodes medicinal plants: A. japonica, A. macrocephala, A. chinensis, and A. lancea. A quantitative study was performed, selecting five bioactive components, including atractylenolide I, II, III, eudesma-4(14),7(11)-dien-8-one and atractylodin, on twenty-six Atractylodes samples of various origins. Sample extraction was optimized to sonication with 80% methanol for 40 min at room temperature. High-performance liquid chromatography with diode array detection was established using a C18 column with a water/acetonitrile gradient system at a flow rate of 1.0 mL/min, and the detection wavelength was set at 236 nm. Liquid chromatography with tandem mass spectrometry was applied to certify the reliability of the quantitative results. The developed methods were validated by ensuring specificity, linearity, limit of quantification, accuracy, precision, recovery, robustness, and stability. Results showed that cangzhu contained higher amounts of atractylenolide I and atractylodin than baizhu, and especially atractylodin contents showed the greatest variation between baizhu and cangzhu. Multivariate statistical analysis, such as principal component analysis and hierarchical cluster analysis, were also employed for further classification of the Atractylodes plants. The established method was suitable for quality control of the Atractylodes plants. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Reflecting on the structure of soil classification systems: insights from a proposal for integrating subsoil data into soil information systems

    Dondeyne, Stefaan; Juilleret, Jérôme; Vancampenhout, Karen; Deckers, Jozef; Hissler, Christophe

    2017-04-01

    Classification of soils in both World Reference Base for soil resources (WRB) and Soil Taxonomy hinges on the identification of diagnostic horizons and characteristics. However as these features often occur within the first 100 cm, these classification systems convey little information on subsoil characteristics. An integrated knowledge of the soil, soil-to-substratum and deeper substratum continuum is required when dealing with environmental issues such as vegetation ecology, water quality or the Critical Zone in general. Therefore, we recently proposed a classification system of the subsolum complementing current soil classification systems. By reflecting on the structure of the subsoil classification system which is inspired by WRB, we aim at fostering a discussion on some potential future developments of WRB. For classifying the subsolum we define Regolite, Saprolite, Saprock and Bedrock as four Subsolum Reference Groups each corresponding to different weathering stages of the subsoil. Principal qualifiers can be used to categorize intergrades of these Subsoil Reference Groups while morphologic and lithologic characteristics can be presented with supplementary qualifiers. We argue that adopting a low hierarchical structure - akin to WRB and in contrast to a strong hierarchical structure as in Soil Taxonomy - offers the advantage of having an open classification system avoiding the need for a priori knowledge of all possible combinations which may be encountered in the field. Just as in WRB we also propose to use principal and supplementary qualifiers as a second level of classification. However, in contrast to WRB we propose to reserve the principal qualifiers for intergrades and to regroup the supplementary qualifiers into thematic categories (morphologic or lithologic). Structuring the qualifiers in this manner should facilitate the integration and handling of both soil and subsoil classification units into soil information systems and calls for paying

  1. Classification of mechanical components electrical systems and civil works structures

    1984-12-01

    RFS or Regles Fondamentales de Surete (Basic Safety Rules) applicable to certain types of nuclear facilities lay down requirements with which compliance, for the type of facilities and within the scope of application covered by the RFS, is considered to be equivalent to compliance with technical French regulatory practice. The object of the RFS is to take advantage of standardization in the field of safety, while allowing for technical progress in that field. They are designed to enable the operating utility and contractors to know the rules pertaining to various subjects which are considered to be acceptable by the Service Central de Surete des Installations Nucleaires, or the SCSIN (Central Department for the Safety of Nuclear Facilities). These RFS should make safety analysis easier and lead to better understanding between experts and individuals concerned with the problems of nuclear safety. The SCSIN reserves the right to modify, when considered necessary, any RFS and specify, if need be, the terms under which a modification is deemed retroactive. The purpose of this RFS is to define the various classifications used in French regulatory practice with regard to safety

  2. International society of neuropathology-haarlem consensus guidelines for nervous system tumor classification and grading

    Louis, D.N.; Perry, A.; Burger, P.; Ellison, D.W.; Reifenberger, G.; Deimling, A. Von; Aldape, K.; Brat, D.; Collins, V.P.; Eberhart, C.; Figarella-Branger, D.; Fuller, G.N.; Giangaspero, F.; Giannini, C.; Hawkins, C.; Kleihues, P.; Korshunov, A.; Kros, J.M.; Lopes, M. Beatriz; Ng, H.K.; Ohgaki, H.; Paulus, W.; Pietsch, T.; Rosenblum, M.; Rushing, E.; Soylemezoglu, F.; Wiestler, O.; Wesseling, P.

    2014-01-01

    Major discoveries in the biology of nervous system tumors have raised the question of how non-histological data such as molecular information can be incorporated into the next World Health Organization (WHO) classification of central nervous system tumors. To address this question, a meeting of

  3. Dengue disease severity in Indonesian children: An evaluation of the World Health Organization classification system

    T.E. Setiati (Tatty); A.T.A. Mairuhu; P. Koraka (Penelope); M. Supriatna (Mohamad); M.R. Mac Gillavry (Melvin); D.P.M. Brandjes (Dees); A.D.M.E. Osterhaus (Albert); J.W.M. van der Meer (Jos); E.C.M. van Gorp (Eric); A. Soemantri (Augustinus)

    2007-01-01

    textabstractBackground: Dengue disease severity is usually classified using criteria set up by the World Health Organization (WHO). We aimed to assess the diagnostic accuracy of the WHO classification system and modifications to this system, and evaluated their potential practical usefulness.

  4. The Subaxial Cervical Spine Injury Classification System: an external agreement validation study

    Middendorp, J.J. van; Audige, L.; Bartels, R.H.M.A.; Bolger, C.; Deverall, H.; Dhoke, P.; Diekerhof, C.H.; Govaert, G.A.; Guimera, V.; Koller, H.; Morris, S.A.; Setiobudi, T.; Hosman, A.J.F.

    2013-01-01

    BACKGROUND CONTEXT: In 2007, the Subaxial Cervical Spine Injury Classification (SLIC) system was introduced demonstrating moderate reliability in an internal validation study. PURPOSE: To assess the agreement on the SLIC system using clinical data from a spinal trauma population and whether the SLIC

  5. The Subaxial Cervical Spine Injury Classification System : an external agreement validation study

    van Middendorp, Joost J.; Audige, Laurent; Bartels, Ronald H.; Bolger, Ciaran; Deverall, Hamish; Dhoke, Priyesh; Diekerhof, Carel H.; Govaert, Geertje A. M.; Guimera, Vicente; Koller, Heiko; Morris, Stephen A. C.; Setiobudi, Tony; Hosman, Allard J. F.

    BACKGROUND CONTEXT: In 2007, the Subaxial Cervical Spine Injury Classification (SLIC) system was introduced demonstrating moderate reliability in an internal validation study. PURPOSE: To assess the agreement on the SLIC system using clinical data from a spinal trauma population and whether the SLIC

  6. Classification of all solutions of the algebraic Riccati equations for infinite-dimensional systems

    Iftime, O; Curtain, R; Zwart, H

    2003-01-01

    We obtain a complete classification of all self-adjoint solution of the control algebraic Riccati equation for infinite-dimensional systems under the following assumptions: the system is output stabilizable, strongly detectable and the filter Riccati equation has an invertible self-adjoint

  7. Danish translation and validation of the International Skin Tear Advisory Panel Skin Tear Classification System

    Skiveren, J; Bermark, S; LeBlanc, K

    2015-01-01

    OBJECTIVE: The aim of this study was to translate, validate and establish reliability of the International Skin Tear Classification System in Danish. METHOD: Phase 1 of the project involved the translation of the International Skin Tear Advisory Panel (ISTAP) Skin Tear Classification System......) and social and health-care assistants (non-RN) from both primary health care and a Danish university hospital in Copenhagen. Thirty photographs, with equal representation of the three types of skin tears, were selected to test validity. The photographs chosen were those originally used for internal...... and external validation by the ISTAP group. The subjects were approached in their place of work and invited to participate in the study and to attend an educational session related to skin tears. RESULTS: The Danish translation of the ISTAP classification system was tested on 270 non-wound specialists...

  8. Improved Management of Part Safety Classification System for Nuclear Power Plant

    Park, Jin Young; Park, Youn Won; Park, Heung Gyu; Park, Hyo Chan [BEES Inc., Daejeon (Korea, Republic of)

    2016-10-15

    As, in recent years, many quality assurance (QA) related incidents, such as falsely-certified parts and forged documentation, etc., were reported in association with the supply of structures, systems, components and parts to nuclear power plants, a need for a better management of safety classification system was addressed so that it would be based more on the level of parts . Presently, the Korean nuclear power plants do not develop and apply relevant procedures for safety classifications, but rather the safety classes of parts are determined solely based on the experience of equipment designers. So proposed in this paper is a better management plan for safety equipment classification system with an aim to strengthen the quality management for parts. The plan was developed through the analysis of newly introduced technical criteria to be applied to parts of nuclear power plant.

  9. Laser ablation aerosol particle time-of-flight mass spectrometer (LAAPTOF): performance, reference spectra and classification of atmospheric samples

    Shen, Xiaoli; Ramisetty, Ramakrishna; Mohr, Claudia; Huang, Wei; Leisner, Thomas; Saathoff, Harald

    2018-04-01

    The laser ablation aerosol particle time-of-flight mass spectrometer (LAAPTOF, AeroMegt GmbH) is able to identify the chemical composition and mixing state of individual aerosol particles, and thus is a tool for elucidating their impacts on human health, visibility, ecosystem, and climate. The overall detection efficiency (ODE) of the instrument we use was determined to range from ˜ (0.01 ± 0.01) to ˜ (4.23 ± 2.36) % for polystyrene latex (PSL) in the size range of 200 to 2000 nm, ˜ (0.44 ± 0.19) to ˜ (6.57 ± 2.38) % for ammonium nitrate (NH4NO3), and ˜ (0.14 ± 0.02) to ˜ (1.46 ± 0.08) % for sodium chloride (NaCl) particles in the size range of 300 to 1000 nm. Reference mass spectra of 32 different particle types relevant for atmospheric aerosol (e.g. pure compounds NH4NO3, K2SO4, NaCl, oxalic acid, pinic acid, and pinonic acid; internal mixtures of e.g. salts, secondary organic aerosol, and metallic core-organic shell particles; more complex particles such as soot and dust particles) were determined. Our results show that internally mixed aerosol particles can result in spectra with new clusters of ions, rather than simply a combination of the spectra from the single components. An exemplary 1-day ambient data set was analysed by both classical fuzzy clustering and a reference-spectra-based classification method. Resulting identified particle types were generally well correlated. We show how a combination of both methods can greatly improve the interpretation of single-particle data in field measurements.

  10. Classification of EEG Signals by Radial Neuro-Fuzzy Systems

    Coufal, David

    2006-01-01

    Roč. 5, č. 2 (2006), s. 415-423 ISSN 1109-2777 R&D Projects: GA MŠk ME 701 Institutional research plan: CEZ:AV0Z10300504 Keywords : neuro-fuzzy systems * radial fuzzy systems * data mining * hybrid systems Subject RIV: BA - General Mathematics

  11. Developing and Organizing a Trauma System and Mass Casualty ...

    An effective trauma system may potentially manage mass casualty incidence ... Israel has a unique trauma system of organizing and managing an emergency event, ... Wisdom, motivation and pragmatism of the Israeli model may be useful to ...

  12. The revised WHO dengue case classification: does the system need to be modified?

    Hadinegoro, Sri Rezeki S

    2012-05-01

    There has been considerable debate regarding the value of both the 1997 and 2009 World Health Organization (WHO) dengue case classification criteria for its diagnosis and management. Differentiation between classic dengue fever (DF) and dengue haemorrhagic fever (DHF) or severe dengue is a key aspect of dengue case classification. The geographic expansion of dengue and its increased incidence in older age groups have contributed to the limited applicability of the 1997 case definitions. Clinical experience of dengue suggests that the illness presents as a spectrum of disease instead of distinct phases. However, despite the rigid grouping of dengue into DF, DHF and dengue shock syndrome (DSS), overlap between the different manifestations has often been observed, which has affected clinical management and triage of patients. The findings of the DENCO study evaluating the 1997 case definitions formed the basis of the revised 2009 WHO case definitions, which classified the illness into dengue with and without warning signs and severe dengue. Although the revised scheme is more sensitive to the diagnosis of severe dengue, and beneficial to triage and case management, there remain issues with its applicability. It is considered by many to be too broad, requiring more specific definition of warning signs. Quantitative research into the predictive value of these warning signs on patient outcomes and the cost-effectiveness of the new classification system is required to ascertain whether the new classification system requires further modification, or whether elements of both classification systems can be combined.

  13. Gender and classifiers in concurrent systems: Refining the typology of nominal classification

    Sebastian Fedden

    2017-04-01

    Full Text Available Some languages have both gender and classifiers, contrary to what was once believed possible. We use these interesting languages as a unique window onto nominal classification. They provide the impetus for a new typology, based on the degree of orthogonality of the semantic systems and the degree of difference of the forms realizing them. This nine-way typology integrates traditional gender, traditional classifiers and – importantly – the many recently attested phenomena lying between. Besides progress specifically in understanding nominal classification, our approach provides clarity on the wider theoretical issue of single versus concurrent featural systems.

  14. Modulation classification for MIMO systems: State of the art and research directions

    Bahloul, Mohammad Rida; Yusoff, Mohd Zuki; Abdel-Aty, Abdel-Haleem; Saad, M. Naufal M.; Al-Jemeli, Marwan

    2016-01-01

    Blind techniques and algorithms for Multiple-Input Multiple-Output (MIMO) signals interception have recently attracted a great deal of research efforts. This is due to their important applications in the military and civil telecommunications domains. One essential step in the signal interception process is to blindly recognize the modulation scheme of the MIMO signals. This process is formally called Modulation Classification (MC). This paper discusses the modulation classification for MIMO systems and presents a comprehensive and critical literature review of the existing MC algorithms for MIMO systems; where possible, gaps in the knowledge base are identified and future directions for the research work are suggested.

  15. Open Fractures of the Hand: Review of Pathogenesis and Introduction of a New Classification System.

    Tulipan, Jacob E; Ilyas, Asif M

    2018-02-01

    Open fractures of the hand are a common and varied group of injuries. Although at increased risk for infection, open fractures of the hand are more resistant to infection than other open fractures. Numerous unique factors in the hand may play a role in the altered risk of postinjury infection. Current systems for the classification of open fractures fail to address the unique qualities of the hand. This article proposes a novel classification system for open fractures of the hand, taking into account the factors unique to the hand that affect its risk for developing infection after an open fracture. Copyright © 2017. Published by Elsevier Inc.

  16. Data Processing And Machine Learning Methods For Multi-Modal Operator State Classification Systems

    Hearn, Tristan A.

    2015-01-01

    This document is intended as an introduction to a set of common signal processing learning methods that may be used in the software portion of a functional crew state monitoring system. This includes overviews of both the theory of the methods involved, as well as examples of implementation. Practical considerations are discussed for implementing modular, flexible, and scalable processing and classification software for a multi-modal, multi-channel monitoring system. Example source code is also given for all of the discussed processing and classification methods.

  17. Comparison and classification of all-optical CDMA systems for future telecommunication networks

    Iversen, Kay; Hampicke, Dirk

    1995-12-01

    This paper shows the state of the art in fiber optical code-division multiple-access (CDMA). Recent work in this area for both, systems and sequences is reviewed and analyzed. For that purpose a classification of systems, corresponding to the manner of signal processing and a classification of known (0,1)-sequences are presented. It is shown that due to the limits by currently available device technology especially two techniques are promising for implementation in broadband telecommunication networks: spectral encoding with integrated optical filters and CDMA in combination with wavelength multiple access schemes. Further an overview about some important experiments in this field is given.

  18. Reliability testing of two classification systems for osteoarthritis and post-traumatic arthritis of the elbow.

    Amini, Michael H; Sykes, Joshua B; Olson, Stephen T; Smith, Richard A; Mauck, Benjamin M; Azar, Frederick M; Throckmorton, Thomas W

    2015-03-01

    The severity of elbow arthritis is one of many factors that surgeons must evaluate when considering treatment options for a given patient. Elbow surgeons have historically used the Broberg and Morrey (BM) and Hastings and Rettig (HR) classification systems to radiographically stage the severity of post-traumatic arthritis (PTA) and primary osteoarthritis (OA). We proposed to compare the intraobserver and interobserver reliability between systems for patients with either PTA or OA. The radiographs of 45 patients were evaluated at least 2 weeks apart by 6 evaluators of different levels of training. Intraobserver and interobserver reliability were calculated by Spearman correlation coefficients with 95% confidence intervals. Agreement was considered almost perfect for coefficients >0.80 and substantial for coefficients of 0.61 to 0.80. In patients with both PTA and OA, intraobserver reliability and interobserver reliability were substantial, with no difference between classification systems. There were no significant differences in intraobserver or interobserver reliability between attending physicians and trainees for either classification system (all P > .10). The presence of fracture implants did not affect reliability in the BM system but did substantially worsen reliability in the HR system (intraobserver P = .04 and interobserver P = .001). The BM and HR classifications both showed substantial intraobserver and interobserver reliability for PTA and OA. Training level differences did not affect reliability for either system. Both trainees and fellowship-trained surgeons may easily and reliably apply each classification system to the evaluation of primary elbow OA and PTA, although the HR system was less reliable in the presence of fracture implants. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  19. Classification of transportation packaging and dry spent fuel storage system components according to importance to safety

    McConnell, J.W., Jr; Ayers, A.L. Jr; Tyacke, M.J.

    1996-02-01

    This report provides a graded approach for classification of components used in transportation packaging and dry spent fuel storage systems. This approach provides a method for identifying, the classification of components according to importance to safety within transportation packagings and dry spent fuel storage systems. Record retention requirements are discussed to identify the documentation necessary to validate that the individual components were fabricated in accordance with their assigned classification. A review of the existing regulations pertaining to transportation packagings and dry storage systems was performed to identify current requirements The general types of transportation packagings and dry storage systems were identified. Discussions were held with suppliers and fabricators of packagings and storage systems to determine current practices. The methodology used in this report is based on Regulatory Guide 7.10, Establishing Quality Assurance Programs for Packaging Used in the Transport of Radioactive Material. This report also includes a list of generic components for each of the general types of transportation packagings and spent fuel storage systems. The safety importance of each component is discussed, and a classification category is assigned

  20. Proposal of a classification system for opportunities to innovate in skin care products.

    Souza, I D da S; Almeida, T L; Takahashi, V P

    2015-10-01

    What are the opportunities to innovate in a skin care product? There are certainly many opportunities and many technologies involved. In this work, we assumed the role of identifying and categorizing these opportunities to develop a comprehensive and intelligible classification system, which could be used as a tool to support decision-making in different professional contexts. Initially, we employed the Delphi method to identify, discuss and standardize the opportunities to innovate in a skin care product. Finally, we used the classification system obtained in the previous phase to label patent applications, therefore, testing the suitability and utility of the system. At the end of the process, we achieved a 10-category classification system for opportunities to innovate in skin care products, and we also illustrated how this system could be used. The resultant classification system offers a normalized terminology for cosmetic scientists interested in dealing with the particularities of incremental and radical innovations in skin care products. © 2015 Society of Cosmetic Scientists and the Société Française de Cosmétologie.

  1. Evolution and classification of the CRISPR-Cas systems

    Makarova, K.S.; Brouns, S.J.J.; Oost, van der J.

    2011-01-01

    The CRISPR-Cas (clustered regularly interspaced short palindromic repeats-CRISPR-associated proteins) modules are adaptive immunity systems that are present in many archaea and bacteria. These defence systems are encoded by operons that have an extraordinarily diverse architecture and a high rate of

  2. DIAGNOSTICS OF DISORDERS AND DISEASES OF MUSCULOSKELETAL SYSTEM IN SCHOOLCHILDREN: APPROACHES, TERMINOLOGY, CLASSIFICATION

    N.B. Mirskaya

    2009-01-01

    Full Text Available This article describes an information system for physicians working in general education institutes, which is named «Detection, correction and prophylaxis of musculoskeletal system disorders in students of general education institutes». This system was created for the purpose of improving diagnostics of initial stages of musculoskeletal system in schoolchildren, detecting of risk factors, and for the provision of timely prophylaxis during school education. The system was based on classification of functional disorders and initial stages of diseases of musculoskeletal system in schoolchildren, developed by authors of present article, and methods of medical examination and organization of this work.Key words: schoolchildren, musculoskeletal system, diagnostics, classification, prophylaxis.(Voprosy sovremennoi pediatrii — Current Pediatrics. 2009;8(3:10-13

  3. Sensor network based vehicle classification and license plate identification system

    Frigo, Janette Rose [Los Alamos National Laboratory; Brennan, Sean M [Los Alamos National Laboratory; Rosten, Edward J [Los Alamos National Laboratory; Raby, Eric Y [Los Alamos National Laboratory; Kulathumani, Vinod K [WEST VIRGINIA UNIV.

    2009-01-01

    Typically, for energy efficiency and scalability purposes, sensor networks have been used in the context of environmental and traffic monitoring applications in which operations at the sensor level are not computationally intensive. But increasingly, sensor network applications require data and compute intensive sensors such video cameras and microphones. In this paper, we describe the design and implementation of two such systems: a vehicle classifier based on acoustic signals and a license plate identification system using a camera. The systems are implemented in an energy-efficient manner to the extent possible using commercially available hardware, the Mica motes and the Stargate platform. Our experience in designing these systems leads us to consider an alternate more flexible, modular, low-power mote architecture that uses a combination of FPGAs, specialized embedded processing units and sensor data acquisition systems.

  4. The development of Version 2 of the AN-SNAP casemix classification system.

    Green, Janette; Gordon, Robert

    2007-04-01

    This paper presents the results of a recent review of the Australian National Sub-acute and Non-acute Patient (AN-SNAP) classification system. The AN-SNAP system was developed by the Centre for Health Service Development, University of Wollongong in 1997. The review was conducted between August 2005 and September 2006. Four clinical sub-committees comprising more than 50 clinicians from sub-acute services across New South Wales as well as representatives from Queensland and the Australian Capital Territory were established to develop a set of proposals to be considered for incorporation into Version 2 of the classification. It is proposed that the final AN-SNAP Version 2 classification will be available for implementation from 1 July 2007.

  5. Unsupervised classification of petroleum Certified Reference Materials and other fuels by chemometric analysis of gas chromatography-mass spectrometry data.

    de Carvalho Rocha, Werickson Fortunato; Schantz, Michele M; Sheen, David A; Chu, Pamela M; Lippa, Katrice A

    2017-06-01

    As feedstocks transition from conventional oil to unconventional petroleum sources and biomass, it will be necessary to determine whether a particular fuel or fuel blend is suitable for use in engines. Certifying a fuel as safe for use is time-consuming and expensive and must be performed for each new fuel. In principle, suitability of a fuel should be completely determined by its chemical composition. This composition can be probed through use of detailed analytical techniques such as gas chromatography-mass spectroscopy (GC-MS). In traditional analysis, chromatograms would be used to determine the details of the composition. In the approach taken in this paper, the chromatogram is assumed to be entirely representative of the composition of a fuel, and is used directly as the input to an algorithm in order to develop a model that is predictive of a fuel's suitability. When a new fuel is proposed for service, its suitability for any application could then be ascertained by using this model to compare its chromatogram with those of the fuels already known to be suitable for that application. In this paper, we lay the mathematical and informatics groundwork for a predictive model of hydrocarbon properties. The objective of this work was to develop a reliable model for unsupervised classification of the hydrocarbons as a prelude to developing a predictive model of their engine-relevant physical and chemical properties. A set of hydrocarbons including biodiesel fuels, gasoline, highway and marine diesel fuels, and crude oils was collected and GC-MS profiles obtained. These profiles were then analyzed using multi-way principal components analysis (MPCA), principal factors analysis (PARAFAC), and a self-organizing map (SOM), which is a kind of artificial neural network. It was found that, while MPCA and PARAFAC were able to recover descriptive models of the fuels, their linear nature obscured some of the finer physical details due to the widely varying composition of the

  6. MEASURING THE MASS OF SOLAR SYSTEM PLANETS USING PULSAR TIMING

    Champion, D. J.; Hobbs, G. B.; Manchester, R. N.; Edwards, R. T.; Burke-Spolaor, S.; Sarkissian, J. M.; Backer, D. C.; Bailes, M.; Bhat, N. D. R.; Van Straten, W.; Coles, W.; Demorest, P. B.; Ferdman, R. D.; Purver, M. B.; Folkner, W. M.; Hotan, A. W.; Kramer, M.; Lommen, A. N.; Nice, D. J.; Stairs, I. H.

    2010-01-01

    High-precision pulsar timing relies on a solar system ephemeris in order to convert times of arrival (TOAs) of pulses measured at an observatory to the solar system barycenter. Any error in the conversion to the barycentric TOAs leads to a systematic variation in the observed timing residuals; specifically, an incorrect planetary mass leads to a predominantly sinusoidal variation having a period and phase associated with the planet's orbital motion about the Sun. By using an array of pulsars (PSRs J0437-4715, J1744-1134, J1857+0943, J1909-3744), the masses of the planetary systems from Mercury to Saturn have been determined. These masses are consistent with the best-known masses determined by spacecraft observations, with the mass of the Jovian system, 9.547921(2) x10 -4 M sun , being significantly more accurate than the mass determined from the Pioneer and Voyager spacecraft, and consistent with but less accurate than the value from the Galileo spacecraft. While spacecraft are likely to produce the most accurate measurements for individual solar system bodies, the pulsar technique is sensitive to planetary system masses and has the potential to provide the most accurate values of these masses for some planets.

  7. COMBINED SYSTEMS OF ENERGY GENERATION – A CHARACTERISATION AND CLASSIFICATION

    Jan Gilewski

    2014-09-01

    Full Text Available The study presents issues concerning technical solutions of combined systems of energy generation which can be used primarily in low-level power plants, installed in various types of public utility sites. A detailed description is given of selected ways of powering combined energy generation systems, presenting conceptual outlines of their operation and information on their advantages, disadvantages and applications. The following systems are introduced: gas-steam, back-pressure steam turbine, extraction-condensing steam turbine, gas turbine, gas microturbine, Stirling engine, fuel cells and internal combustion piston engine. Moreover, the study addresses economic aspects of energy generation in combined systems, discussing different methodologies of cost calculation, including the one used by the European Union. The article also gives a detailed review of piston engine combined-system aggregates available in the Polish market. Type series of associated systems designed for low-power appliances are shown, produced by Polish and foreign companies such as Viessmann, Centrum Elektroniki Stosowanej CES, H. Cegielski – Poznań, KWE Technika Energetyczna, TEDOM Poland or the EPS System.

  8. Controlling a human-computer interface system with a novel classification method that uses electrooculography signals.

    Wu, Shang-Lin; Liao, Lun-De; Lu, Shao-Wei; Jiang, Wei-Ling; Chen, Shi-An; Lin, Chin-Teng

    2013-08-01

    Electrooculography (EOG) signals can be used to control human-computer interface (HCI) systems, if properly classified. The ability to measure and process these signals may help HCI users to overcome many of the physical limitations and inconveniences in daily life. However, there are currently no effective multidirectional classification methods for monitoring eye movements. Here, we describe a classification method used in a wireless EOG-based HCI device for detecting eye movements in eight directions. This device includes wireless EOG signal acquisition components, wet electrodes and an EOG signal classification algorithm. The EOG classification algorithm is based on extracting features from the electrical signals corresponding to eight directions of eye movement (up, down, left, right, up-left, down-left, up-right, and down-right) and blinking. The recognition and processing of these eight different features were achieved in real-life conditions, demonstrating that this device can reliably measure the features of EOG signals. This system and its classification procedure provide an effective method for identifying eye movements. Additionally, it may be applied to study eye functions in real-life conditions in the near future.

  9. Analysis of Damped Mass-Spring Systems for Sound Synthesis

    Don Morgan

    2009-01-01

    Full Text Available There are many ways of synthesizing sound on a computer. The method that we consider, called a mass-spring system, synthesizes sound by simulating the vibrations of a network of interconnected masses, springs, and dampers. Numerical methods are required to approximate the differential equation of a mass-spring system. The standard numerical method used in implementing mass-spring systems for use in sound synthesis is the symplectic Euler method. Implementers and users of mass-spring systems should be aware of the limitations of the numerical methods used; in particular we are interested in the stability and accuracy of the numerical methods used. We present an analysis of the symplectic Euler method that shows the conditions under which the method is stable and the accuracy of the decay rates and frequencies of the sounds produced.

  10. Image-based fall detection and classification of a user with a walking support system

    Taghvaei, Sajjad; Kosuge, Kazuhiro

    2017-10-01

    The classification of visual human action is important in the development of systems that interact with humans. This study investigates an image-based classification of the human state while using a walking support system to improve the safety and dependability of these systems.We categorize the possible human behavior while utilizing a walker robot into eight states (i.e., sitting, standing, walking, and five falling types), and propose two different methods, namely, normal distribution and hidden Markov models (HMMs), to detect and recognize these states. The visual feature for the state classification is the centroid position of the upper body, which is extracted from the user's depth images. The first method shows that the centroid position follows a normal distribution while walking, which can be adopted to detect any non-walking state. The second method implements HMMs to detect and recognize these states. We then measure and compare the performance of both methods. The classification results are employed to control the motion of a passive-type walker (called "RT Walker") by activating its brakes in non-walking states. Thus, the system can be used for sit/stand support and fall prevention. The experiments are performed with four subjects, including an experienced physiotherapist. Results show that the algorithm can be adapted to the new user's motion pattern within 40 s, with a fall detection rate of 96.25% and state classification rate of 81.0%. The proposed method can be implemented to other abnormality detection/classification applications that employ depth image-sensing devices.

  11. Classification of nuclear power plant operator support systems

    Alpeev, A.S.

    1994-01-01

    The objective of this survey was to examine the general characteristics of modern nuclear power plant process monitoring/control systems and to apply developing technology (intellectual automation) in order to improve the man-machine interface. The support systems that implement each phase of the control function...information, assessment, decision-making, and implementation...were discussed, and where applicable, intellectual automation was applied to the support system. It was concluded that the application of intellectual automation, as well as other (undefined) possibilities for improving the man-machine interface, would relieve the operator of many routine activities and allow him to readily apply high potential to those poorly-formalized scenarios in which the operator's work can't be automated. It was also concluded that the development of such support systems would not be without problems, i.e. software certification, traning, and jurisdictional questions

  12. Arrhythmia Classification Based on Multi-Domain Feature Extraction for an ECG Recognition System

    Hongqiang Li

    2016-10-01

    Full Text Available Automatic recognition of arrhythmias is particularly important in the diagnosis of heart diseases. This study presents an electrocardiogram (ECG recognition system based on multi-domain feature extraction to classify ECG beats. An improved wavelet threshold method for ECG signal pre-processing is applied to remove noise interference. A novel multi-domain feature extraction method is proposed; this method employs kernel-independent component analysis in nonlinear feature extraction and uses discrete wavelet transform to extract frequency domain features. The proposed system utilises a support vector machine classifier optimized with a genetic algorithm to recognize different types of heartbeats. An ECG acquisition experimental platform, in which ECG beats are collected as ECG data for classification, is constructed to demonstrate the effectiveness of the system in ECG beat classification. The presented system, when applied to the MIT-BIH arrhythmia database, achieves a high classification accuracy of 98.8%. Experimental results based on the ECG acquisition experimental platform show that the system obtains a satisfactory classification accuracy of 97.3% and is able to classify ECG beats efficiently for the automatic identification of cardiac arrhythmias.

  13. Mass storage system by using broadcast technology

    Fujii, Hirofumi; Itoh, Ryosuke; Manabe, Atsushi; Miyamoto, Akiya; Morita, Youhei; Nozaki, Tadao; Sasaki, Takashi; Watase, Yoshiyuko; Yamasaki, Tokuyuki

    1996-01-01

    There are many similarities between data recording systems for high energy physics and broadcast systems; the data flow is almost one-way, requires real-time recording; requires large-scale automated libraries for 24-hours operation, etc. In addition to these functional similarities, the required data-transfer and data-recording speeds are also close to those for near future experiments. For these reasons, we have collaborated with SONY Broadcast Company to study the usability of broadcast devices for our data storage system. Our new data storage system consists of high-speed data recorders and tape-robots which are originally based on the digital video-tape recorder and the tape-robot for broadcast systems. We are also studying the possibility to use these technologies for the online data-recording system for B-physics experiment at KEK. (author)

  14. Method and System for Controlling a Dexterous Robot Execution Sequence Using State Classification

    Sanders, Adam M. (Inventor); Platt, Robert J., Jr. (Inventor); Quillin, Nathaniel (Inventor); Permenter, Frank Noble (Inventor); Pfeiffer, Joseph (Inventor)

    2014-01-01

    A robotic system includes a dexterous robot and a controller. The robot includes a plurality of robotic joints, actuators for moving the joints, and sensors for measuring a characteristic of the joints, and for transmitting the characteristics as sensor signals. The controller receives the sensor signals, and is configured for executing instructions from memory, classifying the sensor signals into distinct classes via the state classification module, monitoring a system state of the robot using the classes, and controlling the robot in the execution of alternative work tasks based on the system state. A method for controlling the robot in the above system includes receiving the signals via the controller, classifying the signals using the state classification module, monitoring the present system state of the robot using the classes, and controlling the robot in the execution of alternative work tasks based on the present system state.

  15. Reliability assessment of AOSpine thoracolumbar spine injury classification system and Thoracolumbar Injury Classification and Severity Score (TLICS) for thoracolumbar spine injuries: results of a multicentre study.

    Kaul, Rahul; Chhabra, Harvinder Singh; Vaccaro, Alexander R; Abel, Rainer; Tuli, Sagun; Shetty, Ajoy Prasad; Das, Kali Dutta; Mohapatra, Bibhudendu; Nanda, Ankur; Sangondimath, Gururaj M; Bansal, Murari Lal; Patel, Nishit

    2017-05-01

    The aim of this multicentre study was to determine whether the recently introduced AOSpine Classification and Injury Severity System has better interrater and intrarater reliability than the already existing Thoracolumbar Injury Classification and Severity Score (TLICS) for thoracolumbar spine injuries. Clinical and radiological data of 50 consecutive patients admitted at a single centre with a diagnosis of an acute traumatic thoracolumbar spine injury were distributed to eleven attending spine surgeons from six different institutions in the form of PowerPoint presentation, who classified them according to both classifications. After time span of 6 weeks, cases were randomly rearranged and sent again to same surgeons for re-classification. Interobserver and intraobserver reliability for each component of TLICS and new AOSpine classification were evaluated using Fleiss Kappa coefficient (k value) and Spearman rank order correlation. Moderate interrater and intrarater reliability was seen for grading fracture type and integrity of posterior ligamentous complex (Fracture type: k = 0.43 ± 0.01 and 0.59 ± 0.16, respectively, PLC: k = 0.47 ± 0.01 and 0.55 ± 0.15, respectively), and fair to moderate reliability (k = 0.29 ± 0.01 interobserver and 0.44+/0.10 intraobserver, respectively) for total score according to TLICS. Moderate interrater (k = 0.59 ± 0.01) and substantial intrarater reliability (k = 0.68 ± 0.13) was seen for grading fracture type regardless of subtype according to AOSpine classification. Near perfect interrater and intrarater agreement was seen concerning neurological status for both the classification systems. Recently proposed AOSpine classification has better reliability for identifying fracture morphology than the existing TLICS. Additional studies are clearly necessary concerning the application of these classification systems across multiple physicians at different level of training and trauma centers to evaluate not

  16. Studies on mass transfer in electrochemical systems

    Sundstroem, L.G.

    1997-10-01

    The first part is of an introductory nature. It contains a description of the methods used, a discussion of the physics of electrochemical cells with a liquid electrolyte, and a summary of the different studies made, including both those which have been reported in papers, and those which have not. Contributions with novel aspects include (* a derivation of the electro-neutrality condition from Maxwell`s equations of electrodynamics, and **) an argument in favour of the use of mass-averaged velocity in ion transport expressions. The second part focuses on specific cases. It consists of seven research papers which give a more detailed presentation of the main studies 40 refs, 6 figs

  17. An intelligent condition monitoring system for on-line classification of machine tool wear

    Pan, Fu; Hope, A D; Javed, M [Systems Engineering Faculty, Southampton Institute (United Kingdom)

    1998-12-31

    The development of intelligent tool condition monitoring systems is a necessary requirement for successful automation of manufacturing processes. This presentation introduces a tool wear monitoring system for milling operations. The system utilizes power, force, acoustic emission and vibration sensors to monitor tool condition comprehensively. Features relevant to tool wear are drawn from time and frequency domain signals and a fuzzy pattern recognition technique is applied to combine the multisensor information and provide reliable classification results of tool wear states. (orig.) 10 refs.

  18. An intelligent condition monitoring system for on-line classification of machine tool wear

    Fu Pan; Hope, A.D.; Javed, M. [Systems Engineering Faculty, Southampton Institute (United Kingdom)

    1997-12-31

    The development of intelligent tool condition monitoring systems is a necessary requirement for successful automation of manufacturing processes. This presentation introduces a tool wear monitoring system for milling operations. The system utilizes power, force, acoustic emission and vibration sensors to monitor tool condition comprehensively. Features relevant to tool wear are drawn from time and frequency domain signals and a fuzzy pattern recognition technique is applied to combine the multisensor information and provide reliable classification results of tool wear states. (orig.) 10 refs.

  19. Developing and validating the Communication Function Classification System for individuals with cerebral palsy

    HIDECKER, MARY JO COOLEY; PANETH, NIGEL; ROSENBAUM, PETER L; KENT, RAYMOND D; LILLIE, JANET; EULENBERG, JOHN B; CHESTER, KEN; JOHNSON, BRENDA; MICHALSEN, LAUREN; EVATT, MORGAN; TAYLOR, KARA

    2011-01-01

    Aim The purpose of this study was to create and validate a Communication Function Classification System (CFCS) for children with cerebral palsy (CP) that can be used by a wide variety of individuals who are interested in CP. This paper reports the content validity, interrater reliability, and test–retest reliability of the CFCS for children with CP. Method An 11-member development team created comprehensive descriptions of the CFCS levels, and four nominal groups comprising 27 participants critiqued these levels. Within a Delphi survey, 112 participants commented on the clarity and usefulness of the CFCS. Interrater reliability was completed by 61 professionals and 68 parents/relatives who classified 69 children with CP aged 2 to 18 years. Test–retest reliability was completed by 48 professionals who allowed at least 2 weeks between classifications. The participants who assessed the CFCS were all relevant stakeholders: adults with CP, parents of children with CP, educators, occupational therapists, physical therapists, physicians, and speech–language pathologists. Results The interrater reliability of the CFCS was 0.66 between two professionals and 0.49 between a parent and a professional. Professional interrater reliability improved to 0.77 for classification of children older than 4 years. The test–retest reliability was 0.82. Interpretation The CFCS demonstrates content validity and shows very good test–retest reliability, good professional interrater reliability, and moderate parent–professional interrater reliability. Combining the CFCS with the Gross Motor Function Classification System and the Manual Ability Classification System contributes to a functional performance view of daily life for individuals with CP, in accordance with the World Health Organization’s International Classification of Functioning, Disability and Health. PMID:21707596

  20. Interobserver and intraobserver reliability of two classification systems for intra-articular calcaneal fractures.

    Lauder, Anthony J; Inda, David J; Bott, Aaron M; Clare, Michael P; Fitzgibbons, Timothy C; Mormino, Matthew A

    2006-04-01

    For a fracture classification to be useful it must provide prognostic significance, interobserver reliability, and intraobserver reproducibility. Most studies have found reliability and reproducibility to be poor for fracture classification schemes. The purpose of this study was to evaluate the interobserver and intraobserver reliability of the Sanders and Crosby-Fitzgibbons classification systems, two commonly used methods for classifying intra-articular calcaneal fractures. Twenty-five CT scans of intra-articular calcaneal fractures occurring at one trauma center were reviewed. The CT images were presented to eight observers (two orthopaedic surgery chief residents, two foot and ankle fellows, two fellowship-trained orthopaedic trauma surgeons, and two fellowship-trained foot and ankle surgeons) on two separate occasions 8 weeks apart. On each viewing, observers were asked to classify the fractures according to both the Sanders and Crosby-Fitzgibbons systems. Interobserver reliability and intraobserver reproducibility were assessed with computer-generated kappa statistics (SAS software; SAS Institute Inc., Cary, North Carolina). Total unanimity (eight of eight observers assigned the same fracture classification) was achieved only 24% (six of 25) of the time with the Sanders system and 36% (nine of 25) of the time with the Crosby-Fitzgibbons scheme. Interobserver reliability for the Sanders classification method reached a moderate (kappa = 0.48, 0.50) level of agreement, when the subclasses were included. The agreement level increased but remained in the moderate (kappa = 0.55, 0.55) range when the subclasses were excluded. Interobserver agreement reached a substantial (kappa = 0.63, 0.63) level with the Crosby-Fitzgibbons system. Intraobserver reproducibility was better for both schemes. The Sanders system with subclasses included reached moderate (kappa = 0.57) agreement, while ignoring the subclasses brought agreement into the substantial (kappa = 0.77) range

  1. Development of a definition, classification system, and model for cultural geology

    Mitchell, Lloyd W., III

    The concept for this study is based upon a personal interest by the author, an American Indian, in promoting cultural perspectives in undergraduate college teaching and learning environments. Most academicians recognize that merged fields can enhance undergraduate curricula. However, conflict may occur when instructors attempt to merge social science fields such as history or philosophy with geoscience fields such as mining and geomorphology. For example, ideologies of Earth structures derived from scientific methodologies may conflict with historical and spiritual understandings of Earth structures held by American Indians. Specifically, this study addresses the problem of how to combine cultural studies with the geosciences into a new merged academic discipline called cultural geology. This study further attempts to develop the merged field of cultural geology using an approach consisting of three research foci: a definition, a classification system, and a model. Literature reviews were conducted for all three foci. Additionally, to better understand merged fields, a literature review was conducted specifically for academic fields that merged social and physical sciences. Methodologies concentrated on the three research foci: definition, classification system, and model. The definition was derived via a two-step process. The first step, developing keyword hierarchical ranking structures, was followed by creating and analyzing semantic word meaning lists. The classification system was developed by reviewing 102 classification systems and incorporating selected components into a system framework. The cultural geology model was created also utilizing a two-step process. A literature review of scientific models was conducted. Then, the definition and classification system were incorporated into a model felt to reflect the realm of cultural geology. A course syllabus was then developed that incorporated the resulting definition, classification system, and model. This

  2. Performance Evaluation of Multimodal Multifeature Authentication System Using KNN Classification

    Gayathri Rajagopal

    2015-01-01

    Full Text Available This research proposes a multimodal multifeature biometric system for human recognition using two traits, that is, palmprint and iris. The purpose of this research is to analyse integration of multimodal and multifeature biometric system using feature level fusion to achieve better performance. The main aim of the proposed system is to increase the recognition accuracy using feature level fusion. The features at the feature level fusion are raw biometric data which contains rich information when compared to decision and matching score level fusion. Hence information fused at the feature level is expected to obtain improved recognition accuracy. However, information fused at feature level has the problem of curse in dimensionality; here PCA (principal component analysis is used to diminish the dimensionality of the feature sets as they are high dimensional. The proposed multimodal results were compared with other multimodal and monomodal approaches. Out of these comparisons, the multimodal multifeature palmprint iris fusion offers significant improvements in the accuracy of the suggested multimodal biometric system. The proposed algorithm is tested using created virtual multimodal database using UPOL iris database and PolyU palmprint database.

  3. Detection and Classification of Marine mammals using an LFAS system

    IJsselmuide, S.P. van; Beerend, S.P.

    2004-01-01

    World wide a concern is emerging about the influence of man-made sound in the sea on marine life, and particularly about high power active sonars systems. Most concern lies with marine mammals, which fully depend on sound in their natural behaviour (foraging, navigation and communication). One of

  4. Classification of reserve capacity in future power systems

    Frunt, J.; Kling, W.L.; Myrzik, J.M.A.

    2009-01-01

    In electrical power systems must always be a balance between supply and demand. Any imbalance will result in a frequency deviation. To reduce the imbalance to zero, ancillary services for balancing are in use. Ancillary services are characterised by their deployment time and their capacity. By using

  5. Teaching Sexual History-Taking Skills Using the Sexual Events Classification System

    Fidler, Donald C.; Petri, Justin Daniel; Chapman, Mark

    2010-01-01

    Objective: The authors review the literature about educational programs for teaching sexual history-taking skills and describe novel techniques for teaching these skills. Methods: Psychiatric residents enrolled in a brief sexual history-taking course that included instruction on the Sexual Events Classification System, feedback on residents'…

  6. Soil classification and carbon storage in cacao agroforestry farming systems of Bahia, Brazil

    Information concerning the classification of soils and their properties under cacao agroforestry systems of the Atlantic rain forest biome region in the Southeast of Bahia Brazil is largely unknown. Soil and climatic conditions in this region are favorable for high soil carbon storage. This study is...

  7. The surgical algorithm for the AOSpine thoracolumbar spine injury classification system

    Vaccaro, Alexander R.; Schroeder, Gregory D.; Kepler, Christopher K.; Cumhur Oner, F.; Vialle, Luiz R.; Kandziora, Frank; Koerner, John D.; Kurd, Mark F.; Reinhold, Max; Schnake, Klaus J.; Chapman, Jens; Aarabi, Bizhan; Fehlings, Michael G.; Dvorak, Marcel F.

    2016-01-01

    Purpose: The goal of the current study is to establish a surgical algorithm to accompany the AOSpine thoracolumbar spine injury classification system. Methods: A survey was sent to AOSpine members from the six AO regions of the world, and surgeons were asked if a patient should undergo an initial

  8. Duel frequency echo data acquisition system for sea-floor classification

    Navelkar, G.S.; Desai, R.G.P.; Chakraborty, B.

    An echo data acquisition system is designed to digitize echo signal from a single beam shipboard echo-sounder for use in sea-floor classification studies using a 12 bit analog to digital (A/D) card with a maximum sampling frequency of 1 MHz. Both 33...

  9. Architecturally Significant Requirements Identification, Classification and Change Management for Multi-tenant Cloud-Based Systems

    Chauhan, Muhammad Aufeef; Probst, Christian W.

    2017-01-01

    presented a framework for requirements classification and change management focusing on distributed Platform as a Service (PaaS) and Software as a Service (SaaS) systems as well as complex software ecosystems that are built using PaaS and SaaS, such as Tools as a Service (TaaS). We have demonstrated...

  10. A method to assess obstetric outcomes using the 10-Group Classification System: a quantitative descriptive study.

    Rossen, Janne

    2017-01-01

    Internationally, the 10-Group Classification System (TGCS) has been used to report caesarean section rates, but analysis of other outcomes is also recommended. We now aim to present the TGCS as a method to assess outcomes of labour and delivery using routine collection of perinatal information.

  11. Panacea : Automating attack classification for anomaly-based network intrusion detection systems

    Bolzoni, D.; Etalle, S.; Hartel, P.H.; Kirda, E.; Jha, S.; Balzarotti, D.

    2009-01-01

    Anomaly-based intrusion detection systems are usually criticized because they lack a classification of attacks, thus security teams have to manually inspect any raised alert to classify it. We present a new approach, Panacea, to automatically and systematically classify attacks detected by an

  12. Panacea : Automating attack classification for anomaly-based network intrusion detection systems

    Bolzoni, D.; Etalle, S.; Hartel, P.H.

    2009-01-01

    Anomaly-based intrusion detection systems are usually criticized because they lack a classification of attack, thus security teams have to manually inspect any raised alert to classify it. We present a new approach, Panacea, to automatically and systematically classify attacks detected by an

  13. The Groningen Laryngomalacia Classification System-Based on Systematic Review and Dynamic Airway Changes

    van der Heijden, Martijn; Dikkers, Frederik G.; Halmos, Gyorgy B.

    2015-01-01

    Objective: Laryngomalacia is the most common cause of dyspnea and stridor in newborn infants. Laryngomalacia is a dynamic change of the upper airway based on abnormally pliable supraglottic structures, which causes upper airway obstruction. In the past, different classification systems have been

  14. A classification system for one Killing vector solutions of Einstein's equations

    Hoenselaers, C.

    1978-01-01

    A double classification system for one Killing vector solutions in terms of the eigenvectors and eigenvalues of the Ricci and Bach tensor of the associated three manifold is proposed. The calculations of the Bach tensor are carried out for special cases. (author)

  15. FMCW radar system for detection and classification of small vessels in high sea state conditions

    Wasselin, J.-P.; Mazuel, S.; Itcia, E.; Huizing, A.G.; Theil, A.

    2012-01-01

    The ROCKWELL COLLINS France radar department is currently developing a FMCW radar system for the detection and the classification of small maritime targets in the frame of the SISMARIS, SARGOS & I2C projects. Several test campaigns have been conducted since 2009 to develop a sensor as well as an

  16. Capacities and overlap indexes with an application in fuzzy rule-based classification systems

    Paternain, D.; Bustince, H.; Pagola, M.; Sussner, P.; Kolesárová, A.; Mesiar, Radko

    2016-01-01

    Roč. 305, č. 1 (2016), s. 70-94 ISSN 0165-0114 Institutional support: RVO:67985556 Keywords : Capacity * Overlap index * Overlap function * Choquet integral * Fuzzy rule-based classification systems Subject RIV: BA - General Mathematics Impact factor: 2.718, year: 2016 http://library.utia.cas.cz/separaty/2016/E/mesiar-0465739.pdf

  17. Developing and Validating the Communication Function Classification System for Individuals with Cerebral Palsy

    Hidecker, Mary Jo Cooley; Paneth, Nigel; Rosenbaum, Peter L.; Kent, Raymond D.; Lillie, Janet; Eulenberg, John B.; Chester, Ken, Jr.; Johnson, Brenda; Michalsen, Lauren; Evatt, Morgan; Taylor, Kara

    2011-01-01

    Aim: The purpose of this study was to create and validate the Communication Function Classification System (CFCS) for children with cerebral palsy (CP), for use by a wide variety of individuals who are interested in CP. This paper reports the content validity, interrater reliability, and test-retest reliability of the CFCS for children with CP.…

  18. Quantifying physical characteristics of wildland fuels using the fuel characteristic classification system.

    Cynthia L. Riccardi; Susan J. Prichard; David V. Sandberg; Roger D. Ottmar

    2007-01-01

    Wildland fuel characteristics are used in many applications of operational fire predictions and to understand fire effects and behaviour. Even so, there is a shortage of information on basic fuel properties and the physical characteristics of wildland fuels. The Fuel Characteristic Classification System (FCCS) builds and catalogues fuelbed descriptions based on...

  19. Acoustic Resonance Spectroscopy (ARS) Munition Classification System enhancements. Final report

    Vela, O.A.; Huggard, J.C.

    1997-09-18

    Acoustic Resonance Spectroscopy (ARS) is a non-destructive evaluation technology developed at the Los Alamos National Laboratory (LANL). This technology has resulted in three generations of instrumentation, funded by the Defense Special Weapons Agency (DSWA), specifically designed for field identification of chemical weapon (CW) munitions. Each generation of ARS instrumentation was developed with a specific user in mind. The ARS1OO was built for use by the U.N. Inspection Teams going into Iraq immediately after the Persian Gulf War. The ARS200 was built for use in the US-Russia Bilateral Chemical Weapons Treaty (the primary users for this system are the US Onsite Inspection Agency (OSIA) and their Russian counterparts). The ARS300 was built with the requirements of the Organization for the Prohibition of Chemical Weapons (OPCW) in mind. Each successive system is an improved version of the previous system based on learning the weaknesses of each and, coincidentally, on the fact that more time was available to do a requirements analysis and the necessary engineering development. The ARS300 is at a level of development that warrants transferring the technology to a commercial vendor. Since LANL will supply the computer software to the selected vendor, it is possible for LANL to continue to improve the decision algorithms, add features where necessary, and adjust the user interface before the final transfer occurs. This paper describes the current system, ARS system enhancements, and software enhancements. Appendices contain the Operations Manual (software Version 3.01), and two earlier reports on enhancements.

  20. What should an ideal spinal injury classification system consist of? A methodological review and conceptual proposal for future classifications.

    Middendorp, J.J. van; Audige, L.; Hanson, B.; Chapman, J.R.; Hosman, A.J.F.

    2010-01-01

    Since Bohler published the first categorization of spinal injuries based on plain radiographic examinations in 1929, numerous classifications have been proposed. Despite all these efforts, however, only a few have been tested for reliability and validity. This methodological, conceptual review

  1. Validation of a systems-actuarial computer process for multidimensional classification of child psychopathology.

    McDermott, P A; Hale, R L

    1982-07-01

    Tested diagnostic classifications of child psychopathology produced by a computerized technique known as multidimensional actuarial classification (MAC) against the criterion of expert psychological opinion. The MAC program applies series of statistical decision rules to assess the importance of and relationships among several dimensions of classification, i.e., intellectual functioning, academic achievement, adaptive behavior, and social and behavioral adjustment, to perform differential diagnosis of children's mental retardation, specific learning disabilities, behavioral and emotional disturbance, possible communication or perceptual-motor impairment, and academic under- and overachievement in reading and mathematics. Classifications rendered by MAC are compared to those offered by two expert child psychologists for cases of 73 children referred for psychological services. Experts' agreement with MAC was significant for all classification areas, as was MAC's agreement with the experts held as a conjoint reference standard. Whereas the experts' agreement with MAC averaged 86.0% above chance, their agreement with one another averaged 76.5% above chance. Implications of the findings are explored and potential advantages of the systems-actuarial approach are discussed.

  2. Acromioclavicular joint dislocations: radiological correlation between Rockwood classification system and injury patterns in human cadaver species.

    Eschler, Anica; Rösler, Klaus; Rotter, Robert; Gradl, Georg; Mittlmeier, Thomas; Gierer, Philip

    2014-09-01

    The classification system of Rockwood and Young is a commonly used classification for acromioclavicular joint separations subdividing types I-VI. This classification hypothesizes specific lesions to anatomical structures (acromioclavicular and coracoclavicular ligaments, capsule, attached muscles) leading to the injury. In recent literature, our understanding for anatomical correlates leading to the radiological-based Rockwood classification is questioned. The goal of this experimental-based investigation was to approve the correlation between the anatomical injury pattern and the Rockwood classification. In four human cadavers (seven shoulders), the acromioclavicular and coracoclavicular ligaments were transected stepwise. Radiological correlates were recorded (Zanca view) with 15-kg longitudinal tension applied at the wrist. The resulting acromio- and coracoclavicular distances were measured. Radiographs after acromioclavicular ligament transection showed joint space enlargement (8.6 ± 0.3 vs. 3.1 ± 0.5 mm, p acromioclavicular joint space width increased to 16.7 ± 2.7 vs. 8.6 ± 0.3 mm, p acromioclavicular joint lesions higher than Rockwood type I and II. The clinical consequence for reconstruction of low-grade injuries might be a solely surgical approach for the acromioclavicular ligaments or conservative treatment. High-grade injuries were always based on additional structural damage to the coracoclavicular ligaments. Rockwood type V lesions occurred while muscle attachments were intact.

  3. Chinese wine classification system based on micrograph using combination of shape and structure features

    Wan, Yi

    2011-06-01

    Chinese wines can be classification or graded by the micrographs. Micrographs of Chinese wines show floccules, stick and granule of variant shape and size. Different wines have variant microstructure and micrographs, we study the classification of Chinese wines based on the micrographs. Shape and structure of wines' particles in microstructure is the most important feature for recognition and classification of wines. So we introduce a feature extraction method which can describe the structure and region shape of micrograph efficiently. First, the micrographs are enhanced using total variation denoising, and segmented using a modified Otsu's method based on the Rayleigh Distribution. Then features are extracted using proposed method in the paper based on area, perimeter and traditional shape feature. Eight kinds total 26 features are selected. Finally, Chinese wine classification system based on micrograph using combination of shape and structure features and BP neural network have been presented. We compare the recognition results for different choices of features (traditional shape features or proposed features). The experimental results show that the better classification rate have been achieved using the combinational features proposed in this paper.

  4. Technical Evaluation Report 5: Classification of DE Delivery Systems

    Diane Belyk

    2002-01-01

    Full Text Available For their optimal use in distance education (DE, online educational applications need to be integrated within a comprehensive course management system (CMS. Such systems are server-based software that supports the development, delivery, administration, and evaluation of online learning environments. The selection of an appropriate CMS should be considered from the multiple perspectives of the student, the course developer, the course instructor/ tutor, the technical support staff, and the DE institution’s administration. The current evaluation of CMS packages was conducted by a team of individuals with experience and contacts in relation to each of these DE user types. The report compares a series of CMS packages in terms of their range of features, and in relation to their satisfaction of international online education standards.

  5. Orchid Classification Disease Identification And Healthiness Prediction System

    K. W. V Sanjaya

    2015-03-01

    Full Text Available Abstract Floriculture has become one of Sri Lankas major foreign exchange ventures and it has grown substantially during the last few years. Currently we can find three major types of growers in floriculture. They are Large Commercial Ventures Middle Level growers and Village Level growers. Both Middle Level and Village level growers usually go for low cost cultivation with minimum advanced techniques sticking to conventional methods. Orchid cultivation is more pleasurable and profitable than any other floriculture ventures. As the orchid cultivation is so pleasurable we can introduce another group of growers who cultivate orchid in their home gardens for making their home gardens beautiful. But the problem is that most of these growers may not have the knowledge to identify the specie of the plants as there are a number of similar looking plants which are in different species. And also they may not have the knowledge about the orchid diseases. Because of that they may not be able to get the maximum outcome from their cultivations. So the aim of our project is to address the above mentioned issues by introducing a system which can identify orchid species amp diseases and predict the healthiness of the orchid plants. The only input to this system is an image of an orchid leaf and the system will provide the orchid specie name diseases if there any healthiness of the orchid plant and suggestions to overcome the issues associated with the orchid plant as the output. We identify the orchid species and diseases by extracting the features of orchid plant leaf in the input image using image processing technics and with the use of data mining technics we predict the healthiness of the orchid plant. So this system will be a great help for the people who love to grow orchids but dont have knowledge about the orchid species and diseases. And also they will be able to find the healthiness of their orchid plants.

  6. [Study on biopharmaceutics classification system for Chinese materia medica of extract of Huanglian].

    Liu, Yang; Yin, Xiu-Wen; Wang, Zi-Yu; Li, Xue-Lian; Pan, Meng; Li, Yan-Ping; Dong, Ling

    2017-11-01

    One of the advantages of biopharmaceutics classification system of Chinese materia medica (CMMBCS) is expanding the classification research level from single ingredient to multi-components of Chinese herb, and from multi-components research to holistic research of the Chinese materia medica. In present paper, the alkaloids of extract of huanglian were chosen as the main research object to explore their change rules in solubility and intestinal permeability of single-component and multi-components, and to determine the biopharmaceutical classification of extract of Huanglian from holistic level. The typical shake-flask method and HPLC were used to detect the solubility of single ingredient of alkaloids from extract of huanglian. The quantitative research of alkaloids in intestinal absorption was measured in single-pass intestinal perfusion experiment while permeability coefficient of extract of huanglian was calculated by self-defined weight coefficient method. Copyright© by the Chinese Pharmaceutical Association.

  7. Laser ablation aerosol particle time-of-flight mass spectrometer (LAAPTOF: performance, reference spectra and classification of atmospheric samples

    X. Shen

    2018-04-01

    Full Text Available The laser ablation aerosol particle time-of-flight mass spectrometer (LAAPTOF, AeroMegt GmbH is able to identify the chemical composition and mixing state of individual aerosol particles, and thus is a tool for elucidating their impacts on human health, visibility, ecosystem, and climate. The overall detection efficiency (ODE of the instrument we use was determined to range from  ∼  (0.01 ± 0.01 to  ∼  (4.23 ± 2.36 % for polystyrene latex (PSL in the size range of 200 to 2000 nm,  ∼  (0.44 ± 0.19 to  ∼  (6.57 ± 2.38 % for ammonium nitrate (NH4NO3, and  ∼  (0.14 ± 0.02 to  ∼  (1.46 ± 0.08 % for sodium chloride (NaCl particles in the size range of 300 to 1000 nm. Reference mass spectra of 32 different particle types relevant for atmospheric aerosol (e.g. pure compounds NH4NO3, K2SO4, NaCl, oxalic acid, pinic acid, and pinonic acid; internal mixtures of e.g. salts, secondary organic aerosol, and metallic core–organic shell particles; more complex particles such as soot and dust particles were determined. Our results show that internally mixed aerosol particles can result in spectra with new clusters of ions, rather than simply a combination of the spectra from the single components. An exemplary 1-day ambient data set was analysed by both classical fuzzy clustering and a reference-spectra-based classification method. Resulting identified particle types were generally well correlated. We show how a combination of both methods can greatly improve the interpretation of single-particle data in field measurements.

  8. Development of the standard classification system of technical information in the field of RI-biomics and its application to the web system

    Jang, Sol Ah; Kim, Joo Yeon; Park, Tai Jin

    2014-01-01

    RI-Biomics is a new concept that combines radioisotopes (RI) and Biomics. For efficient collection of information, establishment of database for technical information system and its application to the system, there is an increasing need for constructing the standard classification system of technical information by its systematical classification. In this paper, we have summarized the development process of the standard classification system of technical information in the field of RI-Biomics and its application to the system. Constructing the draft version for the standard classification system of technical information was based on that standard classification one in national science and technology in Korea. The final classification system was then derived through the reconstruction and the feedback process based on the consultation from the 7 experts. These results were applied to the database of technical information system after transforming as standard code. Thus, the standard classification system were composed of 5 large classifications and 20 small classifications, and those classification are expected to establish the foundation of information system by achieving the circular structure of collection-analysis-application of information

  9. Reliability and reproducibility analysis of the AOSpine thoracolumbar spine injury classification system by Chinese spinal surgeons.

    Cheng, Jie; Liu, Peng; Sun, Dong; Qin, Tingzheng; Ma, Zikun; Liu, Jingpei

    2017-05-01

    The objective of this study was to analyze the interobserver reliability and intraobserver reproducibility of the new AOSpine thoracolumbar spine injury classification system in young Chinese orthopedic surgeons with different levels of experience in spinal trauma. Previous reports suggest that the new AOSpine thoracolumbar spine injury classification system demonstrates acceptable interobserver reliability and intraobserver reproducibility. However, there are few studies in Asia, especially in China. The AOSpine thoracolumbar spine injury classification system was applied to 109 patients with acute, traumatic thoracolumbar spinal injuries by two groups of spinal surgeons with different levels of clinical experience. The Kappa coefficient was used to determine interobserver reliability and intraobserver reproducibility. The overall Kappa coefficient for all cases was 0.362, which represents fair reliability. The Kappa statistic was 0.385 for A-type injuries and 0.292 for B-type injuries, which represents fair reliability, and 0.552 for C-type injuries, which represents moderate reliability. The Kappa coefficient for intraobserver reproducibility was 0.442 for A-type injuries, 0.485 for B-type injuries, and 0.412 for C-type injuries. These values represent moderate reproducibility for all injury types. The raters in Group A provided significantly better interobserver reliability than Group B (P < 0.05). There were no between-group differences in intraobserver reproducibility. This study suggests that the new AO spine injury classification system may be applied in day-to-day clinical practice in China following extensive training of healthcare providers. Further prospective studies in different healthcare providers and clinical settings are essential for validation of this classification system and to assess its utility.

  10. Polychannel Systems for Mass Digital Communication

    1988-07-01

    years additional systems similar to ours have become operational, including X*Press, Main- stream Data, and Stargate . X*Press Information Services...cities in the United States, and Stargate uses the satellite TV station WTBS to transmit electronic bulletin boards to remote com- puter sites

  11. A support vector machine integrated system for the classification of operation anomalies in nuclear components and systems

    Rocco S, Claudio M.; Zio, Enrico

    2007-01-01

    A support vector machine (SVM) approach to the classification of transients in nuclear power plants is presented. SVM is a machine-learning algorithm that has been successfully used in pattern recognition for cluster analysis. In the present work, single- and multiclass SVM are combined into a hierarchical structure for distinguishing among transients in nuclear systems on the basis of measured data. An example of application of the approach is presented with respect to the classification of anomalies and malfunctions occurring in the feedwater system of a boiling water reactor. The data used in the example are provided by the HAMBO simulator of the Halden Reactor Project

  12. Prior-to-Secondary School Course Classification System: School Codes for the Exchange of Data (SCED). NFES 2011-801

    National Forum on Education Statistics, 2011

    2011-01-01

    In this handbook, "Prior-to-Secondary School Course Classification System: School Codes for the Exchange of Data" (SCED), the National Center for Education Statistics (NCES) and the National Forum on Education Statistics have extended the existing secondary course classification system with codes and descriptions for courses offered at…

  13. Convective heat and mass transfer in rotating disk systems

    Shevchuk, Igor V

    2009-01-01

    The book describes results of investigations of a series of convective heat and mass transfer problems in rotating-disk systems. Methodology used included integral methods, self-similar and approximate analytical solutions, as well as CFD.

  14. Model-Based Systems Engineering Approach to Managing Mass Margin

    Chung, Seung H.; Bayer, Todd J.; Cole, Bjorn; Cooke, Brian; Dekens, Frank; Delp, Christopher; Lam, Doris

    2012-01-01

    When designing a flight system from concept through implementation, one of the fundamental systems engineering tasks ismanaging the mass margin and a mass equipment list (MEL) of the flight system. While generating a MEL and computing a mass margin is conceptually a trivial task, maintaining consistent and correct MELs and mass margins can be challenging due to the current practices of maintaining duplicate information in various forms, such as diagrams and tables, and in various media, such as files and emails. We have overcome this challenge through a model-based systems engineering (MBSE) approach within which we allow only a single-source-of-truth. In this paper we describe the modeling patternsused to capture the single-source-of-truth and the views that have been developed for the Europa Habitability Mission (EHM) project, a mission concept study, at the Jet Propulsion Laboratory (JPL).

  15. Research on high-performance mass storage system

    Cheng Yaodong; Wang Lu; Huang Qiulan; Zheng Wei

    2010-01-01

    With the enlargement of scientific experiments, more and more data will be produced, which brings great challenge to storage system. Large storage capacity and high data access performance are both important to Mass storage system. This paper firstly reviews some kinds of popular storage systems including network storage system, SAN-based sharing system, WAN File system, object-based parallel file system, hierarchical storage system and cloud storage systems. Then some key technologies are presented. Finally, this paper takes BES storage system as an example and introduces its requirements, architecture and operation results. (authors)

  16. Adaptive Road Crack Detection System by Pavement Classification

    Alejandro Amírola

    2011-10-01

    Full Text Available This paper presents a road distress detection system involving the phases needed to properly deal with fully automatic road distress assessment. A vehicle equipped with line scan cameras, laser illumination and acquisition HW-SW is used to storage the digital images that will be further processed to identify road cracks. Pre-processing is firstly carried out to both smooth the texture and enhance the linear features. Non-crack features detection is then applied to mask areas of the images with joints, sealed cracks and white painting, that usually generate false positive cracking. A seed-based approach is proposed to deal with road crack detection, combining Multiple Directional Non-Minimum Suppression (MDNMS with a symmetry check. Seeds are linked by computing the paths with the lowest cost that meet the symmetry restrictions. The whole detection process involves the use of several parameters. A correct setting becomes essential to get optimal results without manual intervention. A fully automatic approach by means of a linear SVM-based classifier ensemble able to distinguish between up to 10 different types of pavement that appear in the Spanish roads is proposed. The optimal feature vector includes different texture-based features. The parameters are then tuned depending on the output provided by the classifier. Regarding non-crack features detection, results show that the introduction of such module reduces the impact of false positives due to non-crack features up to a factor of 2. In addition, the observed performance of the crack detection system is significantly boosted by adapting the parameters to the type of pavement.

  17. A systematic review of definitions and classification systems of adjacent segment pathology.

    Kraemer, Paul; Fehlings, Michael G; Hashimoto, Robin; Lee, Michael J; Anderson, Paul A; Chapman, Jens R; Raich, Annie; Norvell, Daniel C

    2012-10-15

    Systematic review. To undertake a systematic review to determine how "adjacent segment degeneration," "adjacent segment disease," or clinical pathological processes that serve as surrogates for adjacent segment pathology are classified and defined in the peer-reviewed literature. Adjacent segment degeneration and adjacent segment disease are terms referring to degenerative changes known to occur after reconstructive spine surgery, most commonly at an immediately adjacent functional spinal unit. These can include disc degeneration, instability, spinal stenosis, facet degeneration, and deformity. The true incidence and clinical impact of degenerative changes at the adjacent segment is unclear because there is lack of a universally accepted classification system that rigorously addresses clinical and radiological issues. A systematic review of the English language literature was undertaken and articles were classified using the Grades of Recommendation Assessment, Development, and Evaluation criteria. RESULTS.: Seven classification systems of spinal degeneration, including degeneration at the adjacent segment, were identified. None have been evaluated for reliability or validity specific to patients with degeneration at the adjacent segment. The ways in which terms related to adjacent segment "degeneration" or "disease" are defined in the peer-reviewed literature are highly variable. On the basis of the systematic review presented in this article, no formal classification system for either cervical or thoracolumbar adjacent segment disorders currently exists. No recommendations regarding the use of current classification of degeneration at any segments can be made based on the available literature. A new comprehensive definition for adjacent segment pathology (ASP, the now preferred terminology) has been proposed in this Focus Issue, which reflects the diverse pathology observed at functional spinal units adjacent to previous spinal reconstruction and balances

  18. Aerosol mass spectrometry systems and methods

    Fergenson, David P.; Gard, Eric E.

    2013-08-20

    A system according to one embodiment includes a particle accelerator that directs a succession of polydisperse aerosol particles along a predetermined particle path; multiple tracking lasers for generating beams of light across the particle path; an optical detector positioned adjacent the particle path for detecting impingement of the beams of light on individual particles; a desorption laser for generating a beam of desorbing light across the particle path about coaxial with a beam of light produced by one of the tracking lasers; and a controller, responsive to detection of a signal produced by the optical detector, that controls the desorption laser to generate the beam of desorbing light. Additional systems and methods are also disclosed.

  19. A GPU Accelerated Spring Mass System for Surgical Simulation

    Mosegaard, Jesper; Sørensen, Thomas Sangild

    2005-01-01

    There is a growing demand for surgical simulators to dofast and precise calculations of tissue deformation to simulateincreasingly complex morphology in real-time. Unfortunately, evenfast spring-mass based systems have slow convergence rates for largemodels. This paper presents a method to accele...... to accelerate computation of aspring-mass system in order to simulate a complex organ such as theheart. This acceleration is achieved by taking advantage of moderngraphics processing units (GPU)....

  20. Building a mass storage system for physics applications

    Holmes, H.; Loken, S.

    1991-03-01

    The IEEE Mass Storage Reference Model and forthcoming standards based on it provide a standardized architecture to facilitate designing and building mass storage systems, and standard interfaces so that hardware and software from different vendors can interoperate in providing mass storage capabilities. A key concept of this architecture is the separation of control and data flows. This separation allows a smaller machine to provide control functions, while the data can flow directly between high-performance channels. Another key concept is the layering of the file system and the storage functions. This layering allows the designers of the mass storage system to focus on storage functions, which can support a variety of file systems, such as the Network File System, the Andrew File System, and others. The mass storage system provides location-independent file naming, essential if files are to be migrated to different storage devices without requiring changes in application programs. Physics data analysis applications are particularly challenging for mass storage systems because they stream vast amounts of data through analysis applications. Special mechanisms are required, to handle the high data rates and to avoid upsetting the caching mechanisms commonly used for smaller, repetitive-use files. High data rates are facilitated by direct channel connections, where, for example, a dual-ported drive will be positioned by the mass storage controller on one channel, then the data will flow on a second channel directly into the user machine, or directly to a high capacity network, greatly reducing the I/O capacity required in the mass storage control computer. Intelligent storage allocation can be used to bypass the cache devices entirely when large files are being moved

  1. CLASSIFICATION OF THE MGR NON-FUEL COMPONENTS DISPOSAL CONTAINER SYSTEM

    J.A. Ziegler

    1999-01-01

    The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) non-fuel components disposal container system structures, systems and components (SSCs) performed by the MGR Safety Assurance Department. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMP 1998). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333P, ''Quality Assurance Requirements and Description'' (QARD) (DOE 1998)

  2. CLASSIFICATION OF THE MGR PERFORMANCE CONFIRMATION DATA ACQUISITION/MONITORING SYSTEM

    J.A. Ziegler

    1999-01-01

    The purpose of this analysis is to document the Quality Assurance (QA) classification of the Monitored Geologic Repository (MGR) performance confirmation data acquisition/monitoring system structures, systems and components (SSCs) performed by the MGR Safety Assurance Department. This analysis also provides the basis for revision of YMP/90-55Q, Q-List (YMF 1998). The Q-List identifies those MGR SSCs subject to the requirements of DOE/RW-0333PY ''Quality Assurance Requirements and Description'' (QARD) (DOE 1998)

  3. Regulatory use the classification security systems of I and C in VVER type reactors

    Ilizastegui Perez, F.

    1998-01-01

    Presently work the author proposes a classification to the system I and C to the VVER 440 type reactor in categories the regulatory control with a view to establishing the degree to the attention that the regulator should pay to these systems, leaving the importance that have the same ones for the security the installation, during the execution the works that are carried out with this equipment in the stages construction, setting in service and exploitation

  4. Study on the Safety Classification Criteria of Mechanical Systems and Components for Open Pool-Type Research Reactors

    Belal, Al Momani [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Jo, Jong Chull [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2013-10-15

    This paper describes a new compromised safety classification approach based on the comparative study of the different practices in safety classification of mechanical systems and components of open pool-type RRs, which have been adopted by several developed countries in the nuclear power area. It is hoped that the proposed safety classification criteria will be used to develop a harmonized consensus international standard. Different safety classification criteria for systems, structures, and components (SSCs) of nuclear reactors are used among the countries that export or import nuclear reactor technology, which may make the nuclear technology trade and exchange difficult. Thus, such various different approaches of safety classification need to be compromised to establish a global standard. This article proposes practicable optimized criteria for safety classification of SSCs for open pool-type research reactors (RRs)

  5. Study on the Safety Classification Criteria of Mechanical Systems and Components for Open Pool-Type Research Reactors

    Belal, Al Momani; Jo, Jong Chull

    2013-01-01

    This paper describes a new compromised safety classification approach based on the comparative study of the different practices in safety classification of mechanical systems and components of open pool-type RRs, which have been adopted by several developed countries in the nuclear power area. It is hoped that the proposed safety classification criteria will be used to develop a harmonized consensus international standard. Different safety classification criteria for systems, structures, and components (SSCs) of nuclear reactors are used among the countries that export or import nuclear reactor technology, which may make the nuclear technology trade and exchange difficult. Thus, such various different approaches of safety classification need to be compromised to establish a global standard. This article proposes practicable optimized criteria for safety classification of SSCs for open pool-type research reactors (RRs)

  6. Mass transfer with chemical reaction in multiphase systems

    Alper, E.

    1983-01-01

    These volumes deal with the phenomenon of 'mass transfer with chemical reaction' which is of industrial, biological and physiological importance. In process engineering, it is encountered both in separation processes and in reaction engineering and both aspects are covered here in four sections: introduction; gas-liquid system; liquid-liquid system; and gas-liquid-solid system

  7. Injection system of the minicyclotron accelerator mass spectrometer

    Liu Yonghao; Li Deming; Chen Maobai; Lu Xiangshun

    1999-01-01

    The existing injection system of the SMCAMS (super-sensitive mini-cyclotron accelerator mass spectrometer) is described together with the discussion of its disadvantages exposed after having been operating for five years, which provides a basis for consideration of improvements to the injection system. An optimized injection system with an analytical magnet added prior to the minicyclotron has been proposed and calculated

  8. A portable, automated, inexpensive mass and balance calibration system

    Maxwell, S.L. III; Clark, J.P.

    1987-01-01

    Reliable mass measurements are essential for a nuclear production facility or process control laboratory. DOE Order 5630.2 requires that traceable standards be used to calibrate and monitor equipment used for nuclear material measurements. To ensure the reliability of mass measurements and to comply with DOE traceable requirements, a portable, automated mass and balance calibration system is used at the Savannah River Plant. Automation is achieved using an EPSON HX-20 notebook computer, which can be operated via RS232C interfacing to electronic balances or function with manual data entry if computer interfacing is not feasible. This economical, comprehensive, user-friendly system has three main functions in a mass measurement control program (MMCP): balance certification, calibration of mass standards, and daily measurement of traceable standards. The balance certification program tests for accuracy, precision, sensitivity, linearity, and cornerloading versus specific requirements. The mass calibration program allows rapid calibration of inexpensive mass standards traceable to certified Class S standards. This MMCP permits daily measurement of traceable standards to monitor the reliability of balances during routine use. The automated system verifies balance calibration, stores results for future use, and provides a printed control chart of the stored data. Another feature of the system permits three different weighing routines that accommodate our need for varying degrees of reliability in routine weighing operations. 1 ref

  9. A portable, automated, inexpensive mass and balance calibration system

    Maxwell, S.L. III; Clark, J.P.

    1987-01-01

    Reliable mass measurements are essential for a nuclear production facility or process control laboratory. DOE Order 5630.2 requires that traceable standards be used to calibrate and monitor equipment used for nuclear material measurements. To ensure the reliability of mass measurements and to comply with DOE traceability requirements, a portable, automated mass and balance calibration system is used at the Savannah River Plant. Automation is achieved using an EPSON HX-20 notebook computer, which can be operated via RS232C interfacing to electronic balances or function with manual data entry if computer interfacing is not feasible. This economical, comprehensive, user-friendly system has three main functions in a mass measurement control program (MMCP): balance certification, calibration of mass standards, and daily measurement of traceable standards. The balance certification program tests for accuracy, precision, sensitivity, linearity, and cornerloading versus specific requirements. The mass calibration program allows rapid calibration of inexpensive mass standards traceable to certified Class S standards. This MMCP permits daily measurement of traceable standards to monitor the reliability of balances during routine use. The automated system verifies balance calibration, stores results for future use, and provides a printed control chart of the stored data. Another feature of the system permits three different weighing routines that accommodate their need for varying degrees of reliability in routine weighing operations

  10. Classification of structural component and degradation mechanisms for containment systems

    Judge, R.C.B.

    1994-01-01

    UK licence requirements for operation of nuclear power plants is dependent, inter alia, upon the licensee making and implementing adequate arrangements for the regular and systematic examination, inspection, maintenance and testing of all plant which may affect safety (Licence Condition 28). Similarly, the US NRC's Maintenance Rule (published in 10CFR50.65) specifies that a maintenance programme should be developed for plant systems, structures and components determined to be sensitive to ageing which will be used for the balance of the current (and, if relevant, extended) operating licence period. Against this background, the plant operators are seeking to minimise operating and maintenance costs and to enhance plant availability. This leads to a need to optimise the plant inspection and monitoring regimes whilst meeting regulatory requirements. In this paper, a conceptual framework for classifying civil structures and significant ageing mechanisms is described. This provides a systematic approach to making quantitative assessments of the likelihood and of potential degradation mechanisms and forms a consistent framework and a logical basis for prioritising inspection and maintenance schedules. The proposed method is analogous to a fault tree assessment, in which the likelihood of degradation due to a specific mechanism is considered as an event. The structures are considered in terms of their subcomponents. For each subcomponent, the value assigned to the likelihood of degradation is progressively reduced by a sequence of factors which make allowance for the structural and safety significance of any degradation and for the potential for timely detection of any degradation. Illustrative values for these factors are quoted in the text; it is recommended that these values are reviewed following a trial application of the method. (author)

  11. Object Detection and Classification by Decision-Level Fusion for Intelligent Vehicle Systems

    Sang-Il Oh

    2017-01-01

    Full Text Available To understand driving environments effectively, it is important to achieve accurate detection and classification of objects detected by sensor-based intelligent vehicle systems, which are significantly important tasks. Object detection is performed for the localization of objects, whereas object classification recognizes object classes from detected object regions. For accurate object detection and classification, fusing multiple sensor information into a key component of the representation and perception processes is necessary. In this paper, we propose a new object-detection and classification method using decision-level fusion. We fuse the classification outputs from independent unary classifiers, such as 3D point clouds and image data using a convolutional neural network (CNN. The unary classifiers for the two sensors are the CNN with five layers, which use more than two pre-trained convolutional layers to consider local to global features as data representation. To represent data using convolutional layers, we apply region of interest (ROI pooling to the outputs of each layer on the object candidate regions generated using object proposal generation to realize color flattening and semantic grouping for charge-coupled device and Light Detection And Ranging (LiDAR sensors. We evaluate our proposed method on a KITTI benchmark dataset to detect and classify three object classes: cars, pedestrians and cyclists. The evaluation results show that the proposed method achieves better performance than the previous methods. Our proposed method extracted approximately 500 proposals on a 1226 × 370 image, whereas the original selective search method extracted approximately 10 6 × n proposals. We obtained classification performance with 77.72% mean average precision over the entirety of the classes in the moderate detection level of the KITTI benchmark dataset.

  12. YOUNG PLANETARY NEBULAE: HUBBLE SPACE TELESCOPE IMAGING AND A NEW MORPHOLOGICAL CLASSIFICATION SYSTEM

    Sahai, Raghvendra; Villar, Gregory G.; Morris, Mark R.

    2011-01-01

    Using Hubble Space Telescope images of 119 young planetary nebulae (PNs), most of which have not previously been published, we have devised a comprehensive morphological classification system for these objects. This system generalizes a recently devised system for pre-planetary nebulae, which are the immediate progenitors of PNs. Unlike previous classification studies, we have focused primarily on young PNs rather than all PNs, because the former best show the influences or symmetries imposed on them by the dominant physical processes operating at the first and primary stage of the shaping process. Older PNs develop instabilities, interact with the ambient interstellar medium, and are subject to the passage of photoionization fronts, all of which obscure the underlying symmetries and geometries imposed early on. Our classification system is designed to suffer minimal prejudice regarding the underlying physical causes of the different shapes and structures seen in our PN sample, however, in many cases, physical causes are readily suggested by the geometry, along with the kinematics that have been measured in some systems. Secondary characteristics in our system, such as ansae, indicate the impact of a jet upon a slower-moving, prior wind; a waist is the signature of a strong equatorial concentration of matter, whether it be outflowing or in a bound Keplerian disk, and point symmetry indicates a secular trend, presumably precession, in the orientation of the central driver of a rapid, collimated outflow.

  13. Extending an emergency classification expert system to the real-time environment

    Greene, K.R.; Robinson, A.H.

    1990-01-01

    The process of determining emergency action level (EAL) during real or simulated emergencies at the Trojan nuclear power plant was automated in 1988 with development of the EM-CLASS expert system. This system serves to replace the manual flip-chart method of determining the EAL. While the task of performing the classification is more reliable when using EM-CLASS, it still takes as long to determine the appropriate EAL with EM-CLASS as it does with the flowchart tracing method currently in use. During a plant emergency, an environment will exist where there are not enough resources to complete all of the desired tasks. To change this condition, some tasks must be accomplished with greater efficiency. The EM-CLASS application may be improved by taking advantage of the fact that most of the responses to the questions in the emergency classification procedure, EP-001, are available directly from plant measurements. This information could be passed to the expert system electronically. A prototype demonstration of a real-time emergency classification expert system has been developed. It repetitively performs the consultation, acquiring the necessary data electronically when possible and from the user when electronic data are unavailable. The expert system is being tested with scenarios from the drills and graded exercises that have taken place at the Trojan nuclear power plant. The goal of this project is to install the system on the plant simulator and/or the plant computer

  14. The rise of a novel classification system for endometrial carcinoma; integration of molecular subclasses.

    McAlpine, Jessica; Leon-Castillo, Alicia; Bosse, Tjalling

    2018-04-01

    Endometrial cancer is a clinically heterogeneous disease and it is becoming increasingly clear that this heterogeneity may be a function of the diversity of the underlying molecular alterations. Recent large-scale genomic studies have revealed that endometrial cancer can be divided into at least four distinct molecular subtypes, with well-described underlying genomic aberrations. These subtypes can be reliably delineated and carry significant prognostic as well as predictive information; embracing and incorporating them into clinical practice is thus attractive. The road towards the integration of molecular features into current classification systems is not without obstacles. Collaborative studies engaging research teams from across the world are working to define pragmatic assays, improve risk stratification systems by combining molecular features and traditional clinicopathological parameters, and determine how molecular classification can be optimally utilized to direct patient care. Pathologists and clinicians caring for women with endometrial cancer need to engage with and understand the possibilities and limitations of this new approach, because integration of molecular classification of endometrial cancers is anticipated to become an essential part of gynaecological pathology practice. This review will describe the challenges in current systems of endometrial carcinoma classification, the evolution of new molecular technologies that define prognostically distinct molecular subtypes, and potential applications of molecular classification as a step towards precision medicine and refining care for individuals with the most common gynaecological cancer in the developed world. Copyright © 2018 Pathological Society of Great Britain and Ireland. Published by John Wiley & Sons, Ltd. Copyright © 2018 Pathological Society of Great Britain and Ireland. Published by John Wiley & Sons, Ltd.

  15. [GRADE system: classification of quality of evidence and strength of recommendation].

    Aguayo-Albasini, José Luis; Flores-Pastor, Benito; Soria-Aledo, Víctor

    2014-02-01

    The acquisition and classification of scientific evidence, and subsequent formulation of recommendations constitute the basis for the development of clinical practice guidelines. There are several systems for the classification of evidence and strength of recommendations; the most commonly used nowadays is the Grading of Recommendations, Assessment, Development and Evaluation system (GRADE). The GRADE system initially classifies the evidence into high or low, coming from experimental or observational studies; subsequently and following a series of considerations, the evidence is classified into high, moderate, low or very low. The strength of recommendations is based not only on the quality of the evidence, but also on a series of factors such as the risk/benefit balance, values and preferences of the patients and professionals, and the use of resources or costs. Copyright © 2013 AEC. Published by Elsevier Espana. All rights reserved.

  16. A probablistic neural network classification system for signal and image processing

    Bowman, B. [Lawrence Livermore National Lab., CA (United States)

    1994-11-15

    The Acoustical Heart Valve Analysis Package is a system for signal and image processing and classification. It is being developed in both Matlab and C, to provide an interactive, interpreted environment, and has been optimized for large scale matrix operations. It has been used successfully to classify acoustic signals from implanted prosthetic heart valves in human patients, and will be integrated into a commercial Heart Valve Screening Center. The system uses several standard signal processing algorithms, as well as supervised learning techniques using the probabilistic neural network (PNN). Although currently used for the acoustic heart valve application, the algorithms and modular design allow it to be used for other applications, as well. We will describe the signal classification system, and show results from a set of test valves.

  17. [Diversity and classification system of weed community in Harbin City, China].

    Chen, Xiao-Shuang; Liang, Hong; Song, Kun; Da, Liang-Jun

    2014-08-01

    To analyze the causes of weed community diversity and their strategies of adaption to the high heterogeneity of urban habitats, weed communities in the central urban area of Harbin, China were studied, and a classification system was established for the weed communities. There were 175 weed species, belonging to 128 genera and 38 families. The heterogeneous urban habitats and species' temporal niche differentiation resulted in the highly diversified weed communities. The high proportions of mono-species dominance and annual species dominance communities were their response to the unstable urban habitats under human disturbances with high intensities and frequencies. A four-level classification system was established in terms of plant species and habitat conditions. Within this system, the identified 1763 weed communities could be categorized into two types of life form, 5 types of dormancy form, 22 community groups, and 119 dominance communities.

  18. Stochastic change detection in uncertain nonlinear systems using reduced-order models: classification

    Yun, Hae-Bum; Masri, Sami F

    2009-01-01

    A reliable structural health monitoring methodology (SHM) is proposed to detect relatively small changes in uncertain nonlinear systems. A total of 4000 physical tests were performed using a complex nonlinear magneto-rheological (MR) damper. With the effective (or 'genuine') changes and uncertainties in the system characteristics of the semi-active MR damper, which were precisely controlled with known means and standard deviation of the input current, the tested MR damper was identified with the restoring force method (RFM), a non-parametric system identification method involving two-dimensional orthogonal polynomials. Using the identified RFM coefficients, both supervised and unsupervised pattern recognition techniques (including support vector classification and k-means clustering) were employed to detect system changes in the MR damper. The classification results showed that the identified coefficients with orthogonal basis function can be used as reliable indicators for detecting (small) changes, interpreting the physical meaning of the detected changes without a priori knowledge of the monitored system and quantifying the uncertainty bounds of the detected changes. The classification errors were analyzed using the standard detection theory to evaluate the performance of the developed SHM methodology. An optimal classifier design procedure was also proposed and evaluated to minimize type II (or 'missed') errors

  19. An early validation of the Society for Vascular Surgery lower extremity threatened limb classification system.

    Cull, David L; Manos, Ginger; Hartley, Michael C; Taylor, Spence M; Langan, Eugene M; Eidt, John F; Johnson, Brent L

    2014-12-01

    The Society for Vascular Surgery (SVS) recently established the Lower Extremity Threatened Limb Classification System, a staging system using Wound characteristic, Ischemia, and foot Infection (WIfI) to stratify the risk for limb amputation at 1 year. Although intuitive in nature, this new system has not been validated. The purpose of the following study was to determine whether the WIfI system is predictive of limb amputation and wound healing. Between 2007 and 2010, we prospectively obtained data related to wound characteristics, extent of infection, and degree of postrevascularization ischemia in 139 patients with foot wounds who presented for lower extremity revascularization (158 revascularization procedures). After adapting those data to the WIfI classifications, we analyzed the influence of wound characteristics, extent of infection, and degree of ischemia on time to wound healing; empirical Kaplan-Meier survival curves were compared with theoretical outcomes predicted by WIfI expert consensus opinion. Of the 158 foot wounds, 125 (79%) healed. The median time to wound healing was 2.7 months (range, 1-18 months). Factors associated with wound healing included presence of diabetes mellitus (P = .013), wound location (P = .049), wound size (P = .007), wound depth (P = .004), and degree of ischemia (P valid. Further validation of the WIfI classification system with multicenter data is justified. Copyright © 2014 Society for Vascular Surgery. Published by Elsevier Inc. All rights reserved.

  20. The impact of the latest classification system of benign vulvar diseases on the management of women with chronic vulvar pruritus

    Kiymet Handan Kelekci

    2011-01-01

    Full Text Available Background: The management of women with chronic benign vulvar dermatoses has been one of the most difficult and challenging aspects of women′s healthcare for a long time. Aim: Our aim was to compare the ability to approach the specific diagnosis of nonneoplastic and noninfectious vulva diseases, between the new classification system and the old classification system. Methods: One hundred women with chronic vulvar pruritus were included in the study. After detailed examination of the vulva, all visible lesions were biopsied, with normal skin included. All specimens was sent for dermatopathology and examined simultaneously under a binocular microscope by two pathologists. Specific diagnosis if possible and histopathological findings were classified according to both the 1987 and 2006 International Society for the Study of Vulvar Diseases (ISSVD classifications. The ratios that were able to be approached on the specific diagnosis, with the aid the two classification systems, were compared. Results: Specific clinical diagnosis by both pathological and after using clinicopathological correlation was possible in 69 out of 91 patients (75.8% according to the 1987 ISSVD classification, and in 81 out of 91 patients (89.0% according to the ISSVD 2006 classification system. The difference in the clinical diagnosis ratios between the two classification systems was statistically significant ( P < 0.05. In a subgroup of women without specific diagnosis at the time of pathological examination, clinical diagnosis was made in 28 out of 50 women (56% after using the clinicopathological correlation according to the ISSVD 1987 classification, whereas, specific diagnosis was made in 39 out of 49 (79.6% women after using the clinicopathological correlation according to the ISSVD 2006 classification. The difference was statistically significant in terms of the ratio of the ability to achieve a specific diagnosis ( P < 0.01. Conclusion: ISSVD 2006 classification of

  1. A Development of Group Decision Support System for Strategic Item Classification using Analytic Hierarchy Process

    Yoon, Sung Ho; Tae, Jae Woong; Yang, Seung Hyo; Shin, Dong Hoon

    2016-01-01

    Korea has carried out export controls on nuclear items that reflect the Nuclear Suppliers Group (NSG) guidelines (Notice on Trade of Strategic Item of Foreign Trade Act) since joining the NSG in 1995. Nuclear export control starts with classifications that determine whether export items are relevant to nuclear proliferation or not according to NSG guidelines. However, due to qualitative characteristics of nuclear item definition in the guidelines, classification spends a lot of time and effort to make a consensus. The aim of this study is to provide an analysis of an experts' group decision support system (GDSS) based on an analytic hierarchy process (AHP) for the classification of strategic items. The results of this study clearly demonstrated that a GDSS based on an AHP proved positive, systematically providing relative weight among the planning variables and objectives. By using an AHP we can quantify the subjective judgements of reviewers. An order of priority is derived from a numerical value. The verbal and fuzzy measurement of an AHP enables us reach a consensus among reviewers in a GDSS. An AHP sets common weight factors which are a priority of each attribute that represent the views of an entire group. It makes a consistency in decision-making that is important for classification

  2. A Development of Group Decision Support System for Strategic Item Classification using Analytic Hierarchy Process

    Yoon, Sung Ho; Tae, Jae Woong; Yang, Seung Hyo; Shin, Dong Hoon [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

    2016-05-15

    Korea has carried out export controls on nuclear items that reflect the Nuclear Suppliers Group (NSG) guidelines (Notice on Trade of Strategic Item of Foreign Trade Act) since joining the NSG in 1995. Nuclear export control starts with classifications that determine whether export items are relevant to nuclear proliferation or not according to NSG guidelines. However, due to qualitative characteristics of nuclear item definition in the guidelines, classification spends a lot of time and effort to make a consensus. The aim of this study is to provide an analysis of an experts' group decision support system (GDSS) based on an analytic hierarchy process (AHP) for the classification of strategic items. The results of this study clearly demonstrated that a GDSS based on an AHP proved positive, systematically providing relative weight among the planning variables and objectives. By using an AHP we can quantify the subjective judgements of reviewers. An order of priority is derived from a numerical value. The verbal and fuzzy measurement of an AHP enables us reach a consensus among reviewers in a GDSS. An AHP sets common weight factors which are a priority of each attribute that represent the views of an entire group. It makes a consistency in decision-making that is important for classification.

  3. Seismic Target Classification Using a Wavelet Packet Manifold in Unattended Ground Sensors Systems

    Enliang Song

    2013-07-01

    Full Text Available One of the most challenging problems in target classification is the extraction of a robust feature, which can effectively represent a specific type of targets. The use of seismic signals in unattended ground sensor (UGS systems makes this problem more complicated, because the seismic target signal is non-stationary, geology-dependent and with high-dimensional feature space. This paper proposes a new feature extraction algorithm, called wavelet packet manifold (WPM, by addressing the neighborhood preserving embedding (NPE algorithm of manifold learning on the wavelet packet node energy (WPNE of seismic signals. By combining non-stationary information and low-dimensional manifold information, WPM provides a more robust representation for seismic target classification. By using a K nearest neighbors classifier on the WPM signature, the algorithm of wavelet packet manifold classification (WPMC is proposed. Experimental results show that the proposed WPMC can not only reduce feature dimensionality, but also improve the classification accuracy up to 95.03%. Moreover, compared with state-of-the-art methods, WPMC is more suitable for UGS in terms of recognition ratio and computational complexity.

  4. Classification of Maize in Complex Smallholder Farming Systems Using UAV Imagery

    Ola Hall

    2018-06-01

    Full Text Available Yield estimates and yield gap analysis are important for identifying poor agricultural productivity. Remote sensing holds great promise for measuring yield and thus determining yield gaps. Farming systems in sub-Saharan Africa (SSA are commonly characterized by small field size, intercropping, different crop species with similar phenologies, and sometimes high cloud frequency during the growing season, all of which pose real challenges to remote sensing. Here, an unmanned aerial vehicle (UAV system based on a quadcopter equipped with two consumer-grade cameras was used for the delineation and classification of maize plants on smallholder farms in Ghana. Object-oriented image classification methods were applied to the imagery, combined with measures of image texture and intensity, hue, and saturation (IHS, in order to achieve delineation. It was found that the inclusion of a near-infrared (NIR channel and red–green–blue (RGB spectra, in combination with texture or IHS, increased the classification accuracy for both single and mosaic images to above 94%. Thus, the system proved suitable for delineating and classifying maize using RGB and NIR imagery and calculating the vegetation fraction, an important parameter in producing yield estimates for heterogeneous smallholder farming systems.

  5. MODEL-INDEPENDENT STELLAR AND PLANETARY MASSES FROM MULTI-TRANSITING EXOPLANETARY SYSTEMS

    Montet, Benjamin T.; Johnson, John Asher

    2013-01-01

    Precise exoplanet characterization requires precise classification of exoplanet host stars. The masses of host stars are commonly estimated by comparing their spectra to those predicted by stellar evolution models. However, spectroscopically determined properties are difficult to measure accurately for stars that are substantially different from the Sun, such as M-dwarfs and evolved stars. Here, we propose a new method to dynamically measure the masses of transiting planets near mean-motion resonances and their host stars by combining observations of transit timing variations with radial velocity (RV) measurements. We derive expressions to analytically determine the mass of each member of the system and demonstrate the technique on the Kepler-18 system. We compare these analytic results to numerical simulations and find that the two are consistent. We identify eight systems for which our technique could be applied if follow-up RV measurements are collected. We conclude that this analysis would be optimal for systems discovered by next-generation missions similar to TESS or PLATO, which will target bright stars that are amenable to efficient RV follow-up.

  6. Mass distribution law of systems of protocluster fragments

    Ferraioli, F; Virgopia, N [Rome Univ. (Italy). Ist. di Matematica

    1979-02-01

    Starting from the hypothesis of coalescence through inelastic collisions of small fast moving interstellar gas clouds, an attempt has been made to study the evolutionary mass distribution of a system of fragments simulating a protocluster. The assumption of a mass spectrum with a continuous injection of newly formed entities into the primeval system, and the condition of gravitational reduction of the impact cross-section, have been considered. Comparisons of numerical experiments with the mass spectrum in some well-known young galactic clusters, confirm the mass distribution power-law already obtained by other authors. The empirical Schmidt's law concerning the rate of star formation is also confirmed. The hypothesis of the universal validity of the luminosity function, should not be 'a priori' rejected.

  7. Buffer mass test - data aquisition and data processing systems

    Hagvall, B.

    1982-08-01

    This report describes data aquisition and data processing systems used for the Buffer Mass Test at Stripa. A data aquisition system, designed mainly to provide high reliability, in Stripa produces raw-data log tapes. Copies of these tapes are mailed to the computer center at the University of Luleaa for processing of raw-data. The computer systems in Luleaa offer a wide range of processing facilities: large mass storage units, several plotting facilities, programs for processing and monitoring of vast amounts of data, etc.. (Author)

  8. An improved data acquisition system for isotopic ratio mass spectrometers

    Saha, T.K.; Reddy, B.; Nazare, C.K.; Handu, V.K.

    1999-01-01

    Isotopic ratio mass spectrometers designed and fabricated to measure the isotopic ratios with a precision of better than 0.05%. In order to achieve this precision, the measurement system consisting of ion signal to voltage converters, analog to digital converters, and data acquisition electronics should be at least one order better than the overall precision of measurement. Using state of the art components and techniques, a data acquisition system, which is an improved version of the earlier system, has been designed and developed for use with multi-collector isotopic ratio mass spectrometers

  9. Unlocking the full potential of open innovation in the life sciences through a classification system.

    Nilsson, Niclas; Minssen, Timo

    2018-04-01

    A common understanding of expectations and requirements is critical for boosting research-driven business opportunities in open innovation (OI) settings. Transparent communication requires common definitions and standards for OI to align the expectations of both parties. Here, we suggest a five-level classification system for OI models, reflecting the degree of openness. The aim of this classification system is to reduce contract negotiation complexity and times between two parties looking to engage in OI. Systematizing definitions and contractual terms for OI in the life sciences helps to reduce entry barriers and boosts collaborative value generation. By providing a contractual framework with predefined rules, science will be allowed to move more freely, thus maximizing the potential of OI. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

  10. Mass

    Quigg, Chris

    2007-01-01

    In the classical physics we inherited from Isaac Newton, mass does not arise, it simply is. The mass of a classical object is the sum of the masses of its parts. Albert Einstein showed that the mass of a body is a measure of its energy content, inviting us to consider the origins of mass. The protons we accelerate at Fermilab are prime examples of Einsteinian matter: nearly all of their mass arises from stored energy. Missing mass led to the discovery of the noble gases, and a new form of missing mass leads us to the notion of dark matter. Starting with a brief guided tour of the meanings of mass, the colloquium will explore the multiple origins of mass. We will see how far we have come toward understanding mass, and survey the issues that guide our research today.

  11. Specialized Gas Chromatography--Mass Spectrometry Systems for Clinical Chemistry.

    Gochman, Nathan; And Others

    1979-01-01

    A discussion of the basic design and characteristics of gas chromatography-mass spectrometry systems used in clinical chemistry. A comparison of three specific systems: the Vitek Olfax IIA, Hewlett-Packard HP5992, and Du Pont DP-102 are included. (BB)

  12. Mass memory formatter subsystem of the adaptive intrusion data system

    Corlis, N.E.

    1980-09-01

    The Mass Memory Formatter was developed as part of the Adaptive Intrusion Data System (AIDS) to control a 2.4-megabit mass memory. The data from a Memory Controlled Processor is formatted before it is stored in the memory and reformatted during the readout mode. The data is then transmitted to a NOVA 2 minicomputer-controlled magnetic tape recorder for storage. Techniques and circuits are described

  13. Comparing Methodologies for Developing an Early Warning System: Classification and Regression Tree Model versus Logistic Regression. REL 2015-077

    Koon, Sharon; Petscher, Yaacov

    2015-01-01

    The purpose of this report was to explicate the use of logistic regression and classification and regression tree (CART) analysis in the development of early warning systems. It was motivated by state education leaders' interest in maintaining high classification accuracy while simultaneously improving practitioner understanding of the rules by…

  14. Prognostic value of computed tomography classification systems for intra-articular calcaneus fractures.

    Swords, Michael P; Alton, Timothy B; Holt, Sarah; Sangeorzan, Bruce J; Shank, John R; Benirschke, Stephen K

    2014-10-01

    There are several published computed tomography (CT) classification systems for calcaneus fractures, each validated by a different standard. The goal of this study was to measure which system would best predict clinical outcomes as measured by a widely used and validated musculoskeletal health status questionnaire. Forty-nine patients with isolated intra-articular joint depression calcaneus fractures more than 2 years after treatment were identified. All had preoperative CT studies and were treated with open reduction and plate fixation using a lateral extensile approach. Four different blinded reviewers classified injuries according to the CT classification systems of Crosby and Fitzgibbons, Eastwood, and Sanders. Functional outcomes evaluated with a Musculoskeletal Functional Assessment (MFA). The mean follow-up was 4.3 years. The mean MFA score was 15.7 (SD = 11.6), which is not significantly different from published values for midfoot injuries, hindfoot injuries, or both, 1 year after injury (mean = 22.1, SD = 18.4). The classification systems of Crosby and Fitzgibbons, Eastwood, and Sanders, the number of fragments of the posterior facet, and payer status were not significantly associated with outcome as determined by the MFA. The Sanders classification trended toward significance. Anterior process comminution and surgeon's overall impression of severity were significantly associated with functional outcome. The amount of anterior process comminution was an important determinant of functional outcome with increasing anterior process comminution significantly associated with worsened functional outcome (P = .04). In addition, the surgeon's overall impression of severity of injury was predictive of functional outcome (P = .02), as determined by MFA. Level III, comparative series. © The Author(s) 2014.

  15. An Automated and Intelligent Medical Decision Support System for Brain MRI Scans Classification.

    Muhammad Faisal Siddiqui

    Full Text Available A wide interest has been observed in the medical health care applications that interpret neuroimaging scans by machine learning systems. This research proposes an intelligent, automatic, accurate, and robust classification technique to classify the human brain magnetic resonance image (MRI as normal or abnormal, to cater down the human error during identifying the diseases in brain MRIs. In this study, fast discrete wavelet transform (DWT, principal component analysis (PCA, and least squares support vector machine (LS-SVM are used as basic components. Firstly, fast DWT is employed to extract the salient features of brain MRI, followed by PCA, which reduces the dimensions of the features. These reduced feature vectors also shrink the memory storage consumption by 99.5%. At last, an advanced classification technique based on LS-SVM is applied to brain MR image classification using reduced features. For improving the efficiency, LS-SVM is used with non-linear radial basis function (RBF kernel. The proposed algorithm intelligently determines the optimized values of the hyper-parameters of the RBF kernel and also applied k-fold stratified cross validation to enhance the generalization of the system. The method was tested by 340 patients' benchmark datasets of T1-weighted and T2-weighted scans. From the analysis of experimental results and performance comparisons, it is observed that the proposed medical decision support system outperformed all other modern classifiers and achieves 100% accuracy rate (specificity/sensitivity 100%/100%. Furthermore, in terms of computation time, the proposed technique is significantly faster than the recent well-known methods, and it improves the efficiency by 71%, 3%, and 4% on feature extraction stage, feature reduction stage, and classification stage, respectively. These results indicate that the proposed well-trained machine learning system has the potential to make accurate predictions about brain abnormalities

  16. A classification system for plasmids from Enterococci and other Gram-positive bacteria

    Jensen, Lars Bogø; Garcia-Migura, Lourdes; Valenzuela, Antonio Jesus Sanchez

    2010-01-01

    A classification system for plasmids isolated from enterococci and other Gram-positive bacteria was developed based on 111 published plasmid sequences from enterococci and other Gram-positive bacteria; mostly staphylococci. Based on PCR amplification of conserved areas of the replication initiating....... Furthermore, conjugation experiments were performed obtaining 30 transconjugants when selecting for antimicrobial resistance. Among them 19 gave no positive amplicons indicating presence of rep-families not tested for in this experimental setup....

  17. Recommendations for the classification of HIV associated neuromanifestations in the German DRG system.

    Evers, Stefan; Fiori, W; Brockmeyer, N; Arendt, G; Husstedt, I-W

    2005-09-12

    HIV associated neuromanifestations are of growing importance in the in-patient treatment of HIV infected patients. In Germany, all in-patients have to be coded according to the ICD-10 classification and the German DRG-system. We present recommendations how to code the different primary and secondary neuromanifestations of HIV infection. These recommendations are based on the commentary of the German DRG procedures and are aimed to establish uniform coding of neuromanifestations.

  18. Contract-program evaluation: Impact of the DRG classification system on hospitals' outputs

    Alves, Helder António Pereira Gomes

    2010-01-01

    A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics The present work project aims at evaluating the impact of contract-program implementation in 2003 and of incentives created in 2007 on hospital output, under the DRG inpatient classification system. A sample of five Portuguese acute public district hospitals was chosen as sample, between 2002 and 2007. Results of hypothesis testing ...

  19. Investigating mass transfer in symbiotic systems with hydrodynamic simulations

    de Val-Borro, Miguel; Karovska, Margarita; Sasselov, Dimitar D.

    2014-06-01

    We investigate gravitationally focused wind accretion in binary systems consisting of an evolved star with a gaseous envelope and a compact accreting companion. We study the mass accretion and formation of an accretion disk around the secondary caused by the strong wind from the primary late-type component using global 2D and 3D hydrodynamic numerical simulations. In particular, the dependence on the mass accretion rate on the mass loss rate, wind temperature and orbital parameters of the system is considered. For a typical slow and massive wind from an evolved star the mass transfer through a focused wind results in rapid infall onto the secondary. A stream flow is created between the stars with accretion rates of a 2-10% percent of the mass loss from the primary. This mechanism could be an important method for explaining periodic modulations in the accretion rates for a broad range of interacting binary systems and fueling of a large population of X-ray binary systems. We test the plausibility of these accretion flows indicated by the simulations by comparing with observations of the symbiotic CH Cyg variable system.

  20. Movement imagery classification in EMOTIV cap based system by Naïve Bayes.

    Stock, Vinicius N; Balbinot, Alexandre

    2016-08-01

    Brain-computer interfaces (BCI) provide means of communications and control, in assistive technology, which do not require motor activity from the user. The goal of this study is to promote classification of two types of imaginary movements, left and right hands, in an EMOTIV cap based system, using the Naïve Bayes classifier. A preliminary analysis with respect to results obtained by other experiments in this field is also conducted. Processing of the electroencephalography (EEG) signals is done applying Common Spatial Pattern filters. The EPOC electrodes cap is used for EEG acquisition, in two test subjects, for two distinct trial formats. The channels picked are FC5, FC6, P7 and P8 of the 10-20 system, and a discussion about the differences of using C3, C4, P3 and P4 positions is proposed. Dataset 3 of the BCI Competition II is also analyzed using the implemented algorithms. The maximum classification results for the proposed experiment and for the BCI Competition dataset were, respectively, 79% and 85% The conclusion of this study is that the picked positions for electrodes may be applied for BCI systems with satisfactory classification rates.

  1. A new classification system for all-ceramic and ceramic-like restorative materials.

    Gracis, Stefano; Thompson, Van P; Ferencz, Jonathan L; Silva, Nelson R F A; Bonfante, Estevam A

    2015-01-01

    Classification systems for all-ceramic materials are useful for communication and educational purposes and warrant continuous revisions and updates to incorporate new materials. This article proposes a classification system for ceramic and ceramic-like restorative materials in an attempt to systematize and include a new class of materials. This new classification system categorizes ceramic restorative materials into three families: (1) glass-matrix ceramics, (2) polycrystalline ceramics, and (3) resin-matrix ceramics. Subfamilies are described in each group along with their composition, allowing for newly developed materials to be placed into the already existing main families. The criteria used to differentiate ceramic materials are based on the phase or phases present in their chemical composition. Thus, an all-ceramic material is classified according to whether a glass-matrix phase is present (glass-matrix ceramics) or absent (polycrystalline ceramics) or whether the material contains an organic matrix highly filled with ceramic particles (resin-matrix ceramics). Also presented are the manufacturers' clinical indications for the different materials and an overview of the different fabrication methods and whether they are used as framework materials or monolithic solutions. Current developments in ceramic materials not yet available to the dental market are discussed.

  2. The Biopharmaceutics Classification System: subclasses for in vivo predictive dissolution (IPD) methodology and IVIVC.

    Tsume, Yasuhiro; Mudie, Deanna M; Langguth, Peter; Amidon, Greg E; Amidon, Gordon L

    2014-06-16

    The Biopharmaceutics Classification System (BCS) has found widespread utility in drug discovery, product development and drug product regulatory sciences. The classification scheme captures the two most significant factors influencing oral drug absorption; solubility and intestinal permeability and it has proven to be a very useful and a widely accepted starting point for drug product development and drug product regulation. The mechanistic base of the BCS approach has, no doubt, contributed to its wide spread acceptance and utility. Nevertheless, underneath the simplicity of BCS are many detailed complexities, both in vitro and in vivo which must be evaluated and investigated for any given drug and drug product. In this manuscript we propose a simple extension of the BCS classes to include sub-specification of acid (a), base (b) and neutral (c) for classes II and IV. Sub-classification for Classes I and III (high solubility drugs as currently defined) is generally not needed except perhaps in border line solubility cases. It is well known that the , pKa physical property of a drug (API) has a significant impact on the aqueous solubility dissolution of drug from the drug product both in vitro and in vivo for BCS Class II and IV acids and bases, and is the basis, we propose for a sub-classification extension of the original BCS classification. This BCS sub-classification is particularly important for in vivo predictive dissolution methodology development due to the complex and variable in vivo environment in the gastrointestinal tract, with its changing pH, buffer capacity, luminal volume, surfactant luminal conditions, permeability profile along the gastrointestinal tract and variable transit and fasted and fed states. We believe this sub-classification is a step toward developing a more science-based mechanistic in vivo predictive dissolution (IPD) methodology. Such a dissolution methodology can be used by development scientists to assess the likelihood of a

  3. Multiple classifier systems in texton-based approach for the classification of CT images of Lung

    Gangeh, Mehrdad J.; Sørensen, Lauge; Shaker, Saher B.

    2010-01-01

    In this paper, we propose using texton signatures based on raw pixel representation along with a parallel multiple classifier system for the classification of emphysema in computed tomography images of the lung. The multiple classifier system is composed of support vector machines on the texton.......e., texton size and k value in k-means. Our results show that while aggregation of single decisions by SVMs over various k values using multiple classifier systems helps to improve the results compared to single SVMs, combining over different texton sizes is not beneficial. The performance of the proposed...

  4. Knowledge acquisition from natural language for expert systems based on classification problem-solving methods

    Gomez, Fernando

    1989-01-01

    It is shown how certain kinds of domain independent expert systems based on classification problem-solving methods can be constructed directly from natural language descriptions by a human expert. The expert knowledge is not translated into production rules. Rather, it is mapped into conceptual structures which are integrated into long-term memory (LTM). The resulting system is one in which problem-solving, retrieval and memory organization are integrated processes. In other words, the same algorithm and knowledge representation structures are shared by these processes. As a result of this, the system can answer questions, solve problems or reorganize LTM.

  5. Real-time distributed fiber optic sensor for security systems: Performance, event classification and nuisance mitigation

    Mahmoud, Seedahmed S.; Visagathilagar, Yuvaraja; Katsifolis, Jim

    2012-09-01

    The success of any perimeter intrusion detection system depends on three important performance parameters: the probability of detection (POD), the nuisance alarm rate (NAR), and the false alarm rate (FAR). The most fundamental parameter, POD, is normally related to a number of factors such as the event of interest, the sensitivity of the sensor, the installation quality of the system, and the reliability of the sensing equipment. The suppression of nuisance alarms without degrading sensitivity in fiber optic intrusion detection systems is key to maintaining acceptable performance. Signal processing algorithms that maintain the POD and eliminate nuisance alarms are crucial for achieving this. In this paper, a robust event classification system using supervised neural networks together with a level crossings (LCs) based feature extraction algorithm is presented for the detection and recognition of intrusion and non-intrusion events in a fence-based fiber-optic intrusion detection system. A level crossings algorithm is also used with a dynamic threshold to suppress torrential rain-induced nuisance alarms in a fence system. Results show that rain-induced nuisance alarms can be suppressed for rainfall rates in excess of 100 mm/hr with the simultaneous detection of intrusion events. The use of a level crossing based detection and novel classification algorithm is also presented for a buried pipeline fiber optic intrusion detection system for the suppression of nuisance events and discrimination of intrusion events. The sensor employed for both types of systems is a distributed bidirectional fiber-optic Mach-Zehnder (MZ) interferometer.

  6. Design and update of a classification system: the UCSD map of science.

    Katy Börner

    Full Text Available Global maps of science can be used as a reference system to chart career trajectories, the location of emerging research frontiers, or the expertise profiles of institutes or nations. This paper details data preparation, analysis, and layout performed when designing and subsequently updating the UCSD map of science and classification system. The original classification and map use 7.2 million papers and their references from Elsevier's Scopus (about 15,000 source titles, 2001-2005 and Thomson Reuters' Web of Science (WoS Science, Social Science, Arts & Humanities Citation Indexes (about 9,000 source titles, 2001-2004-about 16,000 unique source titles. The updated map and classification adds six years (2005-2010 of WoS data and three years (2006-2008 from Scopus to the existing category structure-increasing the number of source titles to about 25,000. To our knowledge, this is the first time that a widely used map of science was updated. A comparison of the original 5-year and the new 10-year maps and classification system show (i an increase in the total number of journals that can be mapped by 9,409 journals (social sciences had a 80% increase, humanities a 119% increase, medical (32% and natural science (74%, (ii a simplification of the map by assigning all but five highly interdisciplinary journals to exactly one discipline, (iii a more even distribution of journals over the 554 subdisciplines and 13 disciplines when calculating the coefficient of variation, and (iv a better reflection of journal clusters when compared with paper-level citation data. When evaluating the map with a listing of desirable features for maps of science, the updated map is shown to have higher mapping accuracy, easier understandability as fewer journals are multiply classified, and higher usability for the generation of data overlays, among others.

  7. A novel processed food classification system applied to Australian food composition databases.

    O'Halloran, S A; Lacy, K E; Grimes, C A; Woods, J; Campbell, K J; Nowson, C A

    2017-08-01

    The extent of food processing can affect the nutritional quality of foodstuffs. Categorising foods by the level of processing emphasises the differences in nutritional quality between foods within the same food group and is likely useful for determining dietary processed food consumption. The present study aimed to categorise foods within Australian food composition databases according to the level of food processing using a processed food classification system, as well as assess the variation in the levels of processing within food groups. A processed foods classification system was applied to food and beverage items contained within Australian Food and Nutrient (AUSNUT) 2007 (n = 3874) and AUSNUT 2011-13 (n = 5740). The proportion of Minimally Processed (MP), Processed Culinary Ingredients (PCI) Processed (P) and Ultra Processed (ULP) by AUSNUT food group and the overall proportion of the four processed food categories across AUSNUT 2007 and AUSNUT 2011-13 were calculated. Across the food composition databases, the overall proportions of foods classified as MP, PCI, P and ULP were 27%, 3%, 26% and 44% for AUSNUT 2007 and 38%, 2%, 24% and 36% for AUSNUT 2011-13. Although there was wide variation in the classifications of food processing within the food groups, approximately one-third of foodstuffs were classified as ULP food items across both the 2007 and 2011-13 AUSNUT databases. This Australian processed food classification system will allow researchers to easily quantify the contribution of processed foods within the Australian food supply to assist in assessing the nutritional quality of the dietary intake of population groups. © 2017 The British Dietetic Association Ltd.

  8. Dynamics of Mass Transfer in Wide Symbiotic Systems

    de Val-Borro, Miguel; Karovska, M.; Sasselov, D.

    2010-01-01

    We investigate the formation of accretion disks around the secondary in detached systems consisting of an Asymptotic Giant Branch (AGB) star and a compact accreting companion as a function of mass loss rate and orbital parameters. In particular, we study winds from late-type stars that are gravitationally focused by a companion in a wide binary system using hydrodynamical simulations. For a typical slow and massive wind from an evolved star there is a stream flow between the stars with accretion rates of a few percent of the mass loss from the primary. Mass transfer through a focused wind is an important mechanism for a broad range of interacting binary systems and can explain the formation of Barium stars and other chemically peculiar stars.

  9. Dynamical limits on dark mass in the outer solar system

    Hogg, D.W.; Quinlan, G.D.; Tremaine, S.

    1991-01-01

    Simplified model solar systems with known observational errors are considered in conducting a dynamical search for dark mass and its minimum detectable amount, and in determining the significance of observed anomalies. The numerical analysis of the dynamical influence of dark mass on the orbits of outer planets and comets is presented in detail. Most conclusions presented are based on observations of the four giant planets where the observational errors in latitude and longitude are independent Gaussian variables with a standard deviation. Neptune's long orbital period cannot be predicted by modern ephemerides, and no evidence of dark mass is found in considering this planet. Studying the improvement in fit when observations are fitted to models that consider dark mass is found to be an efficient way to detect dark mass. Planet X must have a mass of more than about 10 times the minimum detectable mass to locate the hypothetical planet. It is suggested that the IRAS survey would have already located the Planet X if it is so massive and close that it dynamically influences the outer planets. Orbital residuals from comets are found to be more effective than those from planets in detecting the Kuiper belt. 35 refs

  10. A classification plan of design class for systems of an advanced research reactor

    Yoon, Doo Byung; Ryu, Jeong Soo

    2005-01-01

    Advanced Research Reactor(ARR) is being designed by KAERI since 2002. The final goal of the project is to develop a new and unique research reactor model which is superior in safety and economical aspects. The conceptual design for systems, structures, and components of the ARR will be completed by 2005. The basic design for the systems, structures, and components of the ARR will be performed from 2006. Based on the technical experiences on the design and operation of the HANARO, the ARR will be designed. It is necessary to classify the safety class, quality class, and seismic category for the systems, structures, and components. The objective of this work is to propose a classification plan of design class for systems, structures, and components of the ARR. To achieve this purpose, the revision status of the regulations that used as criteria for determining the design class of the systems, structures, and components of the HANARO were investigated. In addition, the present revision status of the codes and the standards that utilized for the design of the HANARO were investigated. Based on these investigations, the codes and the standards for the design of the systems, structures, and components of the ARR were proposed. The feasibility of the proposed classification plan will be verified by performing the conceptual and basic design of the systems, structures, and components of the ARR

  11. A novel risk classification system for 30-day mortality in children undergoing surgery

    Walter, Arianne I.; Jones, Tamekia L.; Huang, Eunice Y.; Davis, Robert L.

    2018-01-01

    A simple, objective and accurate way of grouping children undergoing surgery into clinically relevant risk groups is needed. The purpose of this study, is to develop and validate a preoperative risk classification system for postsurgical 30-day mortality for children undergoing a wide variety of operations. The National Surgical Quality Improvement Project-Pediatric participant use file data for calendar years 2012–2014 was analyzed to determine preoperative variables most associated with death within 30 days of operation (D30). Risk groups were created using classification tree analysis based on these preoperative variables. The resulting risk groups were validated using 2015 data, and applied to neonates and higher risk CPT codes to determine validity in high-risk subpopulations. A five-level risk classification was found to be most accurate. The preoperative need for ventilation, oxygen support, inotropic support, sepsis, the need for emergent surgery and a do not resuscitate order defined non-overlapping groups with observed rates of D30 that vary from 0.075% (Very Low Risk) to 38.6% (Very High Risk). When CPT codes where death was never observed are eliminated or when the system is applied to neonates, the groupings remained predictive of death in an ordinal manner. PMID:29351327

  12. Convolutional neural network-based classification system design with compressed wireless sensor network images.

    Ahn, Jungmo; Park, JaeYeon; Park, Donghwan; Paek, Jeongyeup; Ko, JeongGil

    2018-01-01

    With the introduction of various advanced deep learning algorithms, initiatives for image classification systems have transitioned over from traditional machine learning algorithms (e.g., SVM) to Convolutional Neural Networks (CNNs) using deep learning software tools. A prerequisite in applying CNN to real world applications is a system that collects meaningful and useful data. For such purposes, Wireless Image Sensor Networks (WISNs), that are capable of monitoring natural environment phenomena using tiny and low-power cameras on resource-limited embedded devices, can be considered as an effective means of data collection. However, with limited battery resources, sending high-resolution raw images to the backend server is a burdensome task that has direct impact on network lifetime. To address this problem, we propose an energy-efficient pre- and post- processing mechanism using image resizing and color quantization that can significantly reduce the amount of data transferred while maintaining the classification accuracy in the CNN at the backend server. We show that, if well designed, an image in its highly compressed form can be well-classified with a CNN model trained in advance using adequately compressed data. Our evaluation using a real image dataset shows that an embedded device can reduce the amount of transmitted data by ∼71% while maintaining a classification accuracy of ∼98%. Under the same conditions, this process naturally reduces energy consumption by ∼71% compared to a WISN that sends the original uncompressed images.

  13. Distribution of causes of abnormal uterine bleeding using the new FIGO classification system

    Qureshi, F.U.; Yusuf, A.W.

    2013-01-01

    Objective: To categorise all women with Abnormal Uterine Bleeding attending a tertiary care centre according to new classification system by the International Federation of Gynaecology and Obstetrics (FIGO). Methods: The descriptive cross-sectional study comprised all non-gravid women of reproductive age with unpredictable, excessive duration, abnormal volume, and/or abnormal frequency of menses for at least 3 months coming to the outpatient department of Lady Willingdon Hospital, Lahore, from August 2010 to July 2011. The subjects underwent structured history, physical examination and pelvic ultrasonography. Endometrium and hysterectomy specimen were obtained for histopathology where applicable. Possible underlying causes were categorised according to the new classification system. Results: A total of 2109 women comprised 19.6% of total of the 10712 woman who visited the gynecological outpatients clinic, 2109(19.6%) had abnormal uterine bleeding. PALM-COEIN categorization done in 991(47%) cases that showed 30(3%) polyp, 15(15%) adenomyosis, 250(25%) leiomyoma, 66(6.6%) malignancy and hyperplasia, 3(0.3%) coagulopathy, 236(24%) ovulatory dysfunction, 48(5%) endometritis, and 53(6%) iatrogenic. The remaining 155(15%) cases were uncategorised. Conclusion: The classification should facilitate multi-institutional investigation into the epidemiology, etiology and treatment of women with Abnormal Uterine Bleeding. (author)

  14. A neurally inspired musical instrument classification system based upon the sound onset.

    Newton, Michael J; Smith, Leslie S

    2012-06-01

    Physiological evidence suggests that sound onset detection in the auditory system may be performed by specialized neurons as early as the cochlear nucleus. Psychoacoustic evidence shows that the sound onset can be important for the recognition of musical sounds. Here the sound onset is used in isolation to form tone descriptors for a musical instrument classification task. The task involves 2085 isolated musical tones from the McGill dataset across five instrument categories. A neurally inspired tone descriptor is created using a model of the auditory system's response to sound onset. A gammatone filterbank and spiking onset detectors, built from dynamic synapses and leaky integrate-and-fire neurons, create parallel spike trains that emphasize the sound onset. These are coded as a descriptor called the onset fingerprint. Classification uses a time-domain neural network, the echo state network. Reference strategies, based upon mel-frequency cepstral coefficients, evaluated either over the whole tone or only during the sound onset, provide context to the method. Classification success rates for the neurally-inspired method are around 75%. The cepstral methods perform between 73% and 76%. Further testing with tones from the Iowa MIS collection shows that the neurally inspired method is considerably more robust when tested with data from an unrelated dataset.

  15. The Temporal Organization Grid: A New Classification System of Temporary Organizations

    Vallari Chandna

    2017-03-01

    Full Text Available With the increased recognition of the key role played by time in processes and outcomes, there has been a renewed focus on temporary organizations. Temporary organizational forms tend to receive attention due to certain characteristics that are unique to them, as compared to permanent organizations, with regard to issues like trust, communication, organizational structure, innovation and creativity among others. They have also been known to generate significant benefits for the organizations participating in them. But to study them in detail, a comprehensive classification system of temporary organizations is needed, which has so far been missing in the extant literature. This paper sets forth a classification grid for temporary organizations which is its primary purpose and also examines the different strategically important variables that further define the typological framework and that act as determinants of success of these temporary organizations.

  16. Fault detection and classification in electrical power transmission system using artificial neural network.

    Jamil, Majid; Sharma, Sanjeev Kumar; Singh, Rajveer

    2015-01-01

    This paper focuses on the detection and classification of the faults on electrical power transmission line using artificial neural networks. The three phase currents and voltages of one end are taken as inputs in the proposed scheme. The feed forward neural network along with back propagation algorithm has been employed for detection and classification of the fault for analysis of each of the three phases involved in the process. A detailed analysis with varying number of hidden layers has been performed to validate the choice of the neural network. The simulation results concluded that the present method based on the neural network is efficient in detecting and classifying the faults on transmission lines with satisfactory performances. The different faults are simulated with different parameters to check the versatility of the method. The proposed method can be extended to the Distribution network of the Power System. The various simulations and analysis of signals is done in the MATLAB(®) environment.

  17. Sexual orientation and gender identity: review of concepts, controversies and their relation to psychopathology classification systems.

    Moleiro, Carla; Pinto, Nuno

    2015-01-01

    Numerous controversies and debates have taken place throughout the history of psychopathology (and its main classification systems) with regards to sexual orientation and gender identity. These are still reflected on present reformulations of gender dysphoria in both the Diagnostic and Statistical Manual and the International Classification of Diseases, and in more or less subtle micro-aggressions experienced by lesbian, gay, bisexual and trans patients in mental health care. The present paper critically reviews this history and current controversies. It reveals that this deeply complex field contributes (i) to the reflection on the very concept of mental illness; (ii) to the focus on subjective distress and person-centered experience of psychopathology; and (iii) to the recognition of stigma and discrimination as significant intervening variables. Finally, it argues that sexual orientation and gender identity have been viewed, in the history of the field of psychopathology, between two poles: gender transgression and gender variance/fluidity.

  18. Prescribing during pregnancy and lactation with reference to the Swedish classification system

    Olesen, Charlotte; Sørensen, Henrik Toft; Berg, Lolkje de Jong-van den

    1999-01-01

    retail pharmacies, made it possible to identify prescriptions by individual use. All 34,334 prescriptions were set against the Swedish classification of risk of drug use in pregnancy and lactation. RESULTS: During pregnancy, safe (group A), potentially harmful (group B3, C, and D), and non...... and II), drugs with possible harmful neonatal effects (group III), and non-classifiable drugs accounted for 43.5%, 4.8%, and 35.8% of the prescriptions, respectively. CONCLUSION: According to the Swedish classification system, we found that during pregnancy and lactation a high proportion of Danish women...... were exposed to one or more drugs in high risk groups; furthermore, knowledge regarding their safety for the fetus and neonate was limited for a large proportion of the prescriptions. Current evidence about long-term effects of prenatal exposure stresses the need for long-term follow-up of health...

  19. A HOME-BASED MASSED PRACTICE SYSTEM FOR PEDIATRIC NEUROREHABILITATION

    Yi-Ning Wu

    2013-11-01

    Full Text Available The objective of this paper is to introduce a novel low-cost human-computer interface (HCI system for home-based massed practice for children with upper limb impairment due to brain injury. Successful massed practice, a type of neurorehabilitation, may be of value for children with brain injury because it facilitates impaired limb use. Use of automated, home-based systems could provide a practical means for massed practice. However, the optimal strategy to deliver and monitor home-based massed practice is still unclear. We integrated motion sensor, video game, and HCI software technologies to create a useful home-based massed practice at targeted joints. The system records joint angle and number of movements using a low-cost custom hand-held sensor. The sensor acts as an input device to play video games. We demonstrated the system’s functionality and provided preliminary observations on usage by children with brain injury, including joint motion and muscle activation.

  20. Comparison of real-time classification systems for arrhythmia detection on Android-based mobile devices.

    Leutheuser, Heike; Gradl, Stefan; Kugler, Patrick; Anneken, Lars; Arnold, Martin; Achenbach, Stephan; Eskofier, Bjoern M

    2014-01-01

    The electrocardiogram (ECG) is a key diagnostic tool in heart disease and may serve to detect ischemia, arrhythmias, and other conditions. Automatic, low cost monitoring of the ECG signal could be used to provide instantaneous analysis in case of symptoms and may trigger the presentation to the emergency department. Currently, since mobile devices (smartphones, tablets) are an integral part of daily life, they could form an ideal basis for automatic and low cost monitoring solution of the ECG signal. In this work, we aim for a realtime classification system for arrhythmia detection that is able to run on Android-based mobile devices. Our analysis is based on 70% of the MIT-BIH Arrhythmia and on 70% of the MIT-BIH Supraventricular Arrhythmia databases. The remaining 30% are reserved for the final evaluation. We detected the R-peaks with a QRS detection algorithm and based on the detected R-peaks, we calculated 16 features (statistical, heartbeat, and template-based). With these features and four different feature subsets we trained 8 classifiers using the Embedded Classification Software Toolbox (ECST) and compared the computational costs for each classification decision and the memory demand for each classifier. We conclude that the C4.5 classifier is best for our two-class classification problem (distinction of normal and abnormal heartbeats) with an accuracy of 91.6%. This classifier still needs a detailed feature selection evaluation. Our next steps are implementing the C4.5 classifier for Android-based mobile devices and evaluating the final system using the remaining 30% of the two used databases.