Ureteroscopic holmium laser cutting for inadvertently sutured drainage tube (report of five cases).

Science.gov (United States)

Gao, Xu; Lu, Xin; Ren, Shancheng; Xu, Chuanliang; Sun, Yinghao

2008-07-01

The aim of this paper is to report a simple solution for inadvertently sutured drainage tube after urological surgery and discuss the different managements according to different types of this embarrassing complication. From September 2001 to January 2007, five inadvertently sutured drainage tubes were treated with ureteroscopic holmium laser cutting for the suture. All drainage tubes were removed after the operation without other complications. Holmium laser cutting via ureteroscope is a simple solution for the embarrassing problem of inadvertently sutured drainage tube. It can save the patient from undergoing another open surgery.

Attention and Facilitation: Converging Information versus Inadvertent Reading in Stroop Task Performance

Science.gov (United States)

Roelofs, Ardi

2010-01-01

Disagreement exists about whether color-word Stroop facilitation is caused by converging information (e.g., Cohen et al., 1990; Roelofs, 2003) or inadvertent reading (MacLeod & MacDonald, 2000). Four experiments tested between these hypotheses by examining Stroop effects on response time (RT) both within and between languages. Words cannot be…

Marginal and Interaction Effects in Ordered Response Models

OpenAIRE

Debdulal Mallick

2009-01-01

In discrete choice models the marginal effect of a variable of interest that is interacted with another variable differs from the marginal effect of a variable that is not interacted with any variable. The magnitude of the interaction effect is also not equal to the marginal effect of the interaction term. I present consistent estimators of both marginal and interaction effects in ordered response models. This procedure is general and can easily be extended to other discrete choice models. I ...

Potential impact of DOE's performance objective for protection of inadvertent intruders on low-level waste disposals at Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Kocher, D.C.

1992-01-01

The Department of Energy's Order 5820.2A, Chapter III, specifies performance objectives for disposal of low-level radioactive waste which include limits on effective dose equivalent for inadvertent intruders. This paper investigates the potential impact of the performance objective for protection of inadvertent intruders on the acceptability of waste disposals in Solid Waste Storage Area (SWSA) 6 at Oak Ridge National Laboratory (ORNL). The analysis is based on radionuclide inventories and waste volumes for recent disposals in SWSA 6 and calculated doses to an inadvertent intruder per unit concentration of radionuclides in disposed waste for assumed exposure scenarios

Probability of inadvertent operation of electrical components in harsh environments

International Nuclear Information System (INIS)

Knoll, A.

1989-01-01

Harsh environment, which means humidity and high temperature, may and will affect unsealed electrical components by causing leakage ground currents in ungrounded direct current systems. The concern in a nuclear power plant is that such harsh environment conditions could cause inadvertent operation of normally deenergized components, which may have a safety-related isolation function. Harsh environment is a common cause failure, and one way to approach the problem is to assume that all the unsealed electrical components will simultaneously and inadvertently energize as a result of the environmental common cause failure. This assumption is unrealistically conservative. Test results indicated that insulating resistences of any terminal block in harsh environments have a random distribution in the range of 1 to 270 kΩ, with a mean value ∼59 kΩ. The objective of this paper is to evaluate a realistic conditional failure probability for inadvertent operation of electrical components in harsh environments. This value will be used thereafter in probabilistic safety evaluations of harsh environment events and will replace both the overconservative common cause probability of 1 and the random failure probability used for mild environments

Analysis of inadvertent containment spray actuation for NPP Krsko

International Nuclear Information System (INIS)

Grgic, D.; Spalj, S.; Fancev, T.

2000-01-01

Refueling Water Storage Tank (RWST) supplies borated water to the Chemical and Volume Control System, Emergency Core Cooling System and Containment Spray System. In the analyses of the containment external pressure the spray temperature is assumed to be equal to the RWST lower temperature limit. This value ensures that the design negative containment pressure will not be exceeded in the event of inadvertent actuation of the Containment Spray. For NPP Kriko the negative containment pressure has to be kept below 0.1 kp/cm2 to avoid the loss of containment integrity. This paper pursuents the analysis of Inadvertent Containment Spray Actuation in order to check the influence of change in RWST water temperature on containment negative pressure. GOTHIC computer code was used for calculation of containment thermal hydraulic behavior during this accident. (author)

Preventing Inadvertent Placement of Foley Catheter into Prostatic ...

African Journals Online (AJOL)

Percutaneous suprapubic trocar cystostomy (SPC) is often needed to drain the bladder when urethral catheterization either fails or is not advisable.[1] It is ... vertical or slightly tilting its tip toward umbilicus during foley placement, prevents the inadvertent migration of catheter into prostatic urethra and further complications.

Implementation of coordinated global serotype 2 oral poliovirus vaccine cessation: risks of inadvertent trivalent oral poliovirus vaccine use.

Science.gov (United States)

Duintjer Tebbens, Radboud J; Hampton, Lee M; Thompson, Kimberly M

2016-06-01

The endgame for polio eradication includes coordinated global cessation of oral poliovirus vaccine (OPV), starting with the cessation of vaccine containing OPV serotype 2 (OPV2) by switching all trivalent OPV (tOPV) to bivalent OPV (bOPV). The logistics associated with this global switch represent a significant undertaking, with some possibility of inadvertent tOPV use after the switch. We used a previously developed poliovirus transmission and OPV evolution model to explore the relationships between the extent of inadvertent tOPV use, the time after the switch of the inadvertent tOPV use and corresponding population immunity to serotype 2 poliovirus transmission, and the ability of the inadvertently introduced viruses to cause a serotype 2 circulating vaccine-derived poliovirus (cVDPV2) outbreak in a hypothetical population. We then estimated the minimum time until inadvertent tOPV use in a supplemental immunization activity (SIA) or in routine immunization (RI) can lead to a cVDPV2 outbreak in realistic populations with properties like those of northern India, northern Pakistan and Afghanistan, northern Nigeria, and Ukraine. At low levels of inadvertent tOPV use, the minimum time after the switch for the inadvertent use to cause a cVDPV2 outbreak decreases sharply with increasing proportions of children inadvertently receiving tOPV. The minimum times until inadvertent tOPV use in an SIA or in RI can lead to a cVDPV2 outbreak varies widely among populations, with higher basic reproduction numbers, lower tOPV-induced population immunity to serotype 2 poliovirus transmission prior to the switch, and a lower proportion of transmission occurring via the oropharyngeal route all resulting in shorter times. In populations with the lowest expected immunity to serotype 2 poliovirus transmission after the switch, inadvertent tOPV use in an SIA leads to a cVDPV2 outbreak if it occurs as soon as 9 months after the switch with 0.5 % of children aged 0-4 years inadvertently

Cyclodialysis cleft with late hypotony maculopathy after inadvertent cannula detachment during cataract surgery.

Science.gov (United States)

Kahawita, Shyalle; Cugati, Sudha; Casson, Robert

2015-05-01

We present the case of a 69-year-old woman who presented with hypotony several years after an inadvertent cannula detachment presumably formed a cyclodialysis cleft during phacoemulsification cataract extraction and posterior chamber intraocular lens implantation in her right eye. To our knowledge, this is the first report of late hypotony maculopathy as a result of inadvertent cannula release. Crown Copyright © 2015. Published by Elsevier Inc. All rights reserved.

Closure Using a Surgical Closure Device of Inadvertent Subclavian Artery Punctures During Central Venous Catheter Placement

International Nuclear Information System (INIS)

Berlet, Matthew H.; Steffen, Diana; Shaughness, George; Hanner, James

2001-01-01

Severe complications can and do occur when central venous catheters are inadvertently placed into subclavian arteries. Two cases are discussed that describe how these inadvertent arterial punctures can be closed using the Perclose device (Abbott Laboratories, Redwood City, CA, USA)

Inadvertent presence of genetically modified elements in maize food ...

African Journals Online (AJOL)

Kenya has a biosafety law and has tested genetically modified (GM) maize under confinement and containment, but has neither released nor commercialized any GM crop. This study assessed various maize food products from the Kenyan farms and markets for the inadvertent presence of GMOs. It assessed the possibility ...

Beverage can stay-tabs: still a source for inadvertently ingested foreign bodies in children

Energy Technology Data Exchange (ETDEWEB)

Donnelly, Lane F. [Cincinnati Children' s Hospital Medical Center, Department of Radiology, MLC 5031, Cincinnati, OH (United States); University of Cincinnati, College of Medicine, Departments of Radiology and Pediatrics, Cincinnati, OH (United States)

2010-09-15

In the 1970s in part to avoid inadvertent ingestion, the beverage-can industry changed can construction from pull-tabs to the stay-tabs (remain attached to can after opening) used today. Our purpose is to identify the number of inadvertent ingestions of beverage-can stay-tabs by children recognized at our institution. The medical information system of a children's hospital was searched with key terms to identify cases in which a witnessed or self-reported inadvertent ingestion of a beverage-can stay-tab resulted in a radiograph to rule out presence of a foreign body. Demographics, identification of stay-tab on radiographs, associated abnormalities, and patient management were reviewed. Nineteen cases of stay-tab ingestion were identified over 16 years. Mean age of ingesters was 8.5 years with the majority being teenagers and 15 (79%) >5 years of age. The stay-tab could be seen radiographically only in 4 (21%) cases - all with the stay-tab identified in the stomach. The identification of 19 children who inadvertently ingested beverage-can stay-tabs at a single children's hospital suggests that such ingestions still occur. Radiologists should be aware that stay-tabs are radiographically visible in the minority (21%) of cases. (orig.)

Beverage can stay-tabs: still a source for inadvertently ingested foreign bodies in children

International Nuclear Information System (INIS)

Donnelly, Lane F.

2010-01-01

In the 1970s in part to avoid inadvertent ingestion, the beverage-can industry changed can construction from pull-tabs to the stay-tabs (remain attached to can after opening) used today. Our purpose is to identify the number of inadvertent ingestions of beverage-can stay-tabs by children recognized at our institution. The medical information system of a children's hospital was searched with key terms to identify cases in which a witnessed or self-reported inadvertent ingestion of a beverage-can stay-tab resulted in a radiograph to rule out presence of a foreign body. Demographics, identification of stay-tab on radiographs, associated abnormalities, and patient management were reviewed. Nineteen cases of stay-tab ingestion were identified over 16 years. Mean age of ingesters was 8.5 years with the majority being teenagers and 15 (79%) >5 years of age. The stay-tab could be seen radiographically only in 4 (21%) cases - all with the stay-tab identified in the stomach. The identification of 19 children who inadvertently ingested beverage-can stay-tabs at a single children's hospital suggests that such ingestions still occur. Radiologists should be aware that stay-tabs are radiographically visible in the minority (21%) of cases. (orig.)

A common-sense probabilistic approach to assessing inadvertent human intrusion into low-level radioactive waste at the Nevada Test Site

International Nuclear Information System (INIS)

Black, P.; Hooten, M.; Black, K.; Moore, B.; Rawlinson, S.; Barker, L.

1997-01-01

Each site disposing of low-level radioactive waste is required to prepare and maintain a site-specific performance assessment (1) to determine potential risks posed by waste management systems to the public, and the environment, and (2) to compare these risks to established performance objectives. The DOE Nevada Operations Office, Waste Management Program recently completed a one-year study of site-specific scenarios for inadvertent human intrusion by drilling into buried low-level radioactive waste sites, as part of ongoing performance assessment studies. Intrusion scenarios focus on possible penetration of buried waste through drilling for sources of groundwater. The probability of drilling penetration into waste was judged to be driven primarily by two settlement scenarios: (1) scattered individual homesteaders, and (2) a community scenario consisting of a cluster of settlers that share drilling and distribution systems for groundwater. Management control factors include institutional control, site knowledge, placards and markers, surface barriers, and subsurface barriers. The Subject Matter Experts concluded that institutional control and site knowledge may be important factors for the first few centuries, but are not significant over the evaluation period of 10,000 years. Surface barriers can be designed that would deter the siting of a drill rig over the waste site to an effectiveness of 95%. Subsurface barriers and placards and markers will not as effectively prevent inadvertent human intrusion. Homestead and community scenarios were considered by the panel to render a site-specific probability of around 10% for inadvertent human intrusion. If management controls are designed and implemented effectively, then the probability of inadvertent human intrusion can be reduced to less than 1%

Neonicotinoid insecticides can serve as inadvertent insect contraceptives

Science.gov (United States)

Villamar-Bouza, Laura; Bruckner, Selina; Chantawannakul, Panuwan; Gauthier, Laurent; Khongphinitbunjong, Kitiphong; Retschnig, Gina; Troxler, Aline; Vidondo, Beatriz; Neumann, Peter; Williams, Geoffrey R.

2016-01-01

There is clear evidence for sublethal effects of neonicotinoid insecticides on non-target ecosystem service-providing insects. However, their possible impact on male insect reproduction is currently unknown, despite the key role of sex. Here, we show that two neonicotinoids (4.5 ppb thiamethoxam and 1.5 ppb clothianidin) significantly reduce the reproductive capacity of male honeybees (drones), Apis mellifera. Drones were obtained from colonies exposed to the neonicotinoid insecticides or controls, and subsequently maintained in laboratory cages until they reached sexual maturity. While no significant effects were observed for male teneral (newly emerged adult) body mass and sperm quantity, the data clearly showed reduced drone lifespan, as well as reduced sperm viability (percentage living versus dead) and living sperm quantity by 39%. Our results demonstrate for the first time that neonicotinoid insecticides can negatively affect male insect reproductive capacity, and provide a possible mechanistic explanation for managed honeybee queen failure and wild insect pollinator decline. The widespread prophylactic use of neonicotinoids may have previously overlooked inadvertent contraceptive effects on non-target insects, thereby limiting conservation efforts. PMID:27466446

Effect of posterior crown margin placement on gingival health.

Science.gov (United States)

Reitemeier, Bernd; Hänsel, Kristina; Walter, Michael H; Kastner, Christian; Toutenburg, Helge

2002-02-01

The clinical impact of posterior crown margin placement on gingival health has not been thoroughly quantified. This study evaluated the effect of posterior crown margin placement with multivariate analysis. Ten general dentists reviewed 240 patients with 480 metal-ceramic crowns in a prospective clinical trial. The alloy was randomly selected from 2 high gold, 1 low gold, and 1 palladium alloy. Variables were the alloy used, oral hygiene index score before treatment, location of crown margins at baseline, and plaque index and sulcus bleeding index scores recorded for restored and control teeth after 1 year. The effect of crown margin placement on sulcular bleeding and plaque accumulation was analyzed with regression models (Prisk of bleeding at intrasulcular posterior crown margins was approximately twice that at supragingival margins. Poor oral hygiene before treatment and plaque also were associated with sulcular bleeding. Facial sites exhibited a lower probability of sulcular bleeding than lingual surfaces. Type of alloy did not influence sulcular bleeding. In this study, placement of crown margins was one of several parameters that affected gingival health.

Late-Onset Inadvertent Bleb Formation following Pars Plana M3 Molteno Implant Tube Obstruction

Directory of Open Access Journals (Sweden)

Anmar M. Abdul-Rahman

2017-01-01

Full Text Available Purpose: To report a case of inadvertent bleb formation presenting 18 months after pars plana M3 Molteno implant tube obstruction in a patient with mixed mechanism glaucoma. Materials and Methods: An 84-year-old Caucasian male with mixed mechanism glaucoma underwent slit-lamp examination, gonioscopy, colour anterior segment photography and anterior segment optical coherence tomography (AS-OCT. Results: An inadvertent bleb developed 18 months after pars plana implant tube re-positioning with a 6/0 Vicryl tie ligature. The bleb was located in the area anterior to the implant plate; it was characterised by a thin, transparent, avascular and multi-cystic wall, with a visible stoma at the posterior edge of the bleb. The bleb was functioning as demonstrated by an intraocular pressure of 6 mm Hg at presentation and a punctate fluorescein uptake pattern of the bleb wall. The bleb over the plate of the Molteno implant was non-functioning, likely secondary to tube obstruction by vitreous in the early postoperative period. AS-OCT showed a tract from the anterior chamber commencing at an entry wound through a corneal tunnel to the posterior stoma at the base of the inadvertent bleb. Conclusions: We hypothesise that the pathophysiologic factors resulting in an inadvertent bleb are a result of a combination of apoptosis, late-onset wound dehiscence and internal gaping of a centrally placed corneal wound. In addition, aqueous hydrodynamic factors may play a role.

Potential impact of DOE's performance objective for protection of inadvertent intruders on low-level waste disposals at Oak Ridge National Laboratory

International Nuclear Information System (INIS)

Kocher, D.C.

1993-01-01

Performance objectives for disposal of low-level radioactive waste at Department of Energy (DOE) sites include limits on radiation dose to inadvertent intruders. This paper investigates the potential impact of DOE's performance objective for protection of inadvertent intruders on the acceptability of low-level waste disposals at Oak Ridge National Laboratory (ORNL). The analysis is based on waste volumes and radionuclide inventories for recent disposals and estimated doses to an inadvertent intruder for assumed exposure scenarios. The analysis indicates that more than 99% of the total volume of waste in recent disposals meets the performance objective for inadvertent intruders, and the volume of waste found to be unacceptable for disposal is only about 16 m 3 . Therefore, DOE's performance objective for protection of inadvertent intruders probably will not have unreasonably adverse impacts on acceptable waste disposals at ORNL

Interpreting Marginal Effects in the Multinomial Logit Model

DEFF Research Database (Denmark)

Wulff, Jesper

2014-01-01

with a substantial increase in the probability of entering a foreign market using a joint venture, while increases in the unpredictability in the host country environment are associated with a lower probability of wholly owned subsidiaries and a higher probability of exporting entries....... that have entered foreign markets. Through the application of a multinomial logit model, careful analysis of the marginal effects is performed through graphical representations, marginal effects at the mean, average marginal effects and elasticities. I show that increasing cultural distance is associated......This paper presents the challenges when researchers interpret results about relationships between variables from discrete choice models with multiple outcomes. The recommended approach is demonstrated by testing predictions from transaction cost theory on a sample of 246 Scandinavian firms...

Intentional and inadvertent non-adherence in adult coeliac disease. A cross-sectional survey.

Science.gov (United States)

Hall, Nicola J; Rubin, Gregory P; Charnock, Anne

2013-09-01

Adherence to a gluten-free diet is the mainstay of treatment for coeliac disease. Non-adherence is common as the diet is restrictive and can be difficult to follow. This study aimed to determine the rates of intentional and inadvertent non-adherence in adult coeliac disease and to examine the factors associated with both. A self-completion questionnaire was mailed to adult coeliac patients identified from the computer records of 31 family practices within the North East of England. We received 287 responses after one reminder. Intentional gluten consumption was reported by 115 (40%) of respondents. 155 (54%) had made at least one known mistaken lapse over the same period and 82 (29%) reported neither intentional nor mistaken gluten consumption. Using logistic regression analysis, low self-efficacy, perceptions of tolerance to gluten and intention were found to be independently predictive of intentional gluten consumption. A statistical model predicted 71.8% of cases reporting intentional lapses. Intentional non-adherence to the GFD was found to be common but not as frequent as inadvertent lapses. Distinguishing the factors influencing both intentional and inadvertent non-adherence is useful in understanding dietary self-management in coeliac disease. Copyright © 2013 Elsevier Ltd. All rights reserved.

Anabolic agents: recent strategies for their detection and protection from inadvertent doping

Science.gov (United States)

Geyer, Hans; Schänzer, Wilhelm; Thevis, Mario

2014-01-01

According to the World Anti-Doping Agency (WADA) Prohibited List, anabolic agents consist of exogenous anabolic androgenic steroids (AAS), endogenous AAS and other anabolic agents such as clenbuterol and selective androgen receptor modulators (SARMs). Currently employed strategies for their improved detection include the prolongation of the detection windows for exogenous AAS, non-targeted and indirect analytical approaches for the detection of modified steroids (designer steroids), the athlete’s biological passport and isotope ratio mass spectrometry for the detection of the misuse of endogenous AAS, as well as preventive doping research for the detection of SARMs. The recent use of these strategies led to 4–80-fold increases of adverse analytical findings for exogenous AAS, to the detection of the misuse of new designer steroids, to adverse analytical findings of different endogenous AAS and to the first adverse analytical findings of SARMs. The strategies of the antidoping research are not only focused on the development of methods to catch the cheating athlete but also to protect the clean athlete from inadvertent doping. Within the past few years several sources of inadvertent doping with anabolic agents have been identified. Among these are nutritional supplements adulterated with AAS, meat products contaminated with clenbuterol, mycotoxin (zearalenone) contamination leading to zeranol findings, and natural products containing endogenous AAS. The protection strategy consists of further investigations in case of reasonable suspicion of inadvertent doping, publication of the results, education of athletes and development of methods to differentiate between intentional and unintentional doping. PMID:24632537

Inadvertent pump start with gas expansion modules

International Nuclear Information System (INIS)

Campbell, L.R.; Harris, R.A.; Heard, F.J.; Dautel, W.A.

1992-01-01

Previous testing demonstrated the effectiveness of gas expansion modules (GEMs) in mitigating the consequences of a loss-of-flow-without-scram transient in Fast Flux Test Facility (FFTF)-sized sodium cooled cores. As a result, GEMs have been included in the advance liquid-metal reactor (PRISM) design project sponsored by the US Department of Energy. The PRISM design is under review at the US Nuclear Regulatory Commission for licensability. In the unlikely event that the reactor does not scram during a loss of low, the GEMs quickly insert sufficient negative reactivity to limit fuel and cladding temperatures to acceptable values. This is the positive benefit of the GEMs; however, the reverse situation must be considered. A primary pump could be inadvertently started from near-critical conditions resulting in a positive reactivity insertion and a power transient. One mitigating aspect of this event is that as the reactivity associated with the GEMs is inserted, the increasing flow increases core cooling. A test was conducted in the FFTF to demonstrate that the GEM and feedback reactivity are well predicted following pump start, and the reactivity transient is benign

Veblen effect, marginal utility of money, and money illusion

OpenAIRE

Malakhov, Sergey

2013-01-01

The paper discovers microeconomic mechanism of Veblen effect as well as of Giffen case as results of the negative marginal utility of money. The marginal utility of consumption also becomes negative. The total consumption-leisure utility is increased due to the increase in leisure time. This overall effect results in the phenomenon of money illusion on the macroeconomic level. This general effect has deep historical and institutional grounds and, in order to minimize its disequilibrium econom...

Research on the margin of futures markets and the policy spillover effect

Institute of Scientific and Technical Information of China (English)

Difang Wan; Yang Yang; Dong Fang; Guang Yang

2011-01-01

Purpose-The purpose of this paper is to investigate whether the change of margin in Chinese futures markets has policy spillover effects.Design/methodology/approach-The paper constructs a model based on Harzmark and on Chng,taking Chinese futures markets status quo as a single species and restrictions on foreign investment into consideration,introduces the assumptions of spillover effect of speculators,then obtains investor's demand function.Subsequently,the effects of Shanghai Futures Exchange's 11 instances of margin changing are analyzed.Findings-The paper finds that in the Chinese futures market,margin changing has impact on the open interest (OI) and the speculator spillover effect is validated.Research limitations/implications-The irrational behavior of investors in markets is not taken into account in the model and data about spillover speculators were not directly available.Originality/value-The paper usefully analyzes the effects of the Shanghai Futures Exchange's 11 instances of margin changing from 2000 to 2007 and examines the actual effects of margin-changing policy,in the views of OI,trading volume and the externality,the results showing that margin changing has impact on investor structure and validates the existence of the assumed speculator spillover effect.

Inadvertent raising of levels in the FFTF primary sodium pumps. Final unusual occurrence report, HEDL 79-34 (FFTF-58)

International Nuclear Information System (INIS)

Kuechle, J.D.

1981-01-01

The final unusual occurrence report describes the inadvertent raising of the sodium level in the FFTF primary sodium pumps during system testing. This event is now judged to have caused permanent deformation of the primary pump shaft on loop 1 during a period when pump rotation was stopped and sodium level in the pump tank was inadvertently increased. The shaft was subsequently removed, straightened, and returned to service in the spare FFTF pump

Evaluation of SPACE code for simulation of inadvertent opening of spray valve in Shin Kori unit 1

International Nuclear Information System (INIS)

Kim, Seyun; Youn, Bumsoo

2013-01-01

SPACE code is expected to be applied to the safety analysis for LOCA (Loss of Coolant Accident) and Non-LOCA scenarios. SPACE code solves two-fluid, three-field governing equations and programmed with C++ computer language using object-oriented concepts. To evaluate the analysis capability for the transient phenomena in the actual nuclear power plant, an inadvertent opening of spray valve in startup test phase of Shin Kori unit 1 was simulated with SPACE code. To evaluate the analysis capability for the transient phenomena in the actual nuclear power plant, an inadvertent opening of spray valve in startup test phase of Shin Kori unit 1 was simulated with SPACE code

Interventions for treating inadvertent postoperative hypothermia.

Science.gov (United States)

Warttig, Sheryl; Alderson, Phil; Campbell, Gillian; Smith, Andrew F

2014-11-20

Inadvertent postoperative hypothermia (a drop in core body temperature to below 36°C) occurs as an effect of surgery when anaesthetic drugs and exposure of the skin for long periods of time during surgery result in interference with normal temperature regulation. Once hypothermia has occurred, it is important that patients are rewarmed promptly to minimise potential complications. Several different interventions are available for rewarming patients. To estimate the effectiveness of treating inadvertent perioperative hypothermia through postoperative interventions to decrease heat loss and apply passive and active warming systems in adult patients who have undergone surgery. We searched the Cochrane Central Register of Controlled Trials (CENTRAL) (2014, Issue 2), MEDLINE (Ovid SP) (1956 to 21 February 2014), EMBASE (Ovid SP) (1982 to 21 February 2014), the Institute for Scientific Information (ISI) Web of Science (1950 to 21 February 2014) and the Cumulative Index to Nursing and Allied Health Literature (CINAHL), EBSCO host (1980 to 21 February 2014), as well as reference lists of articles. We also searched www.controlled-trials.com and www.clincialtrials.gov. Randomized controlled trials of postoperative warming interventions aiming to reverse hypothermia compared with control or with each other. Three review authors identified studies for inclusion in this review. One review author extracted data and completed risk of bias assessments; two review authors checked the details. Meta-analysis was conducted when appropriate by using standard methodological procedures as expected by The Cochrane Collaboration. We included 11 trials with 699 participants. Ten trials provided data for analysis. Trials varied in the numbers and types of participants included and in the types of surgery performed. Most trials were at high or unclear risk of bias because of inappropriate or unclear randomization procedures, and because blinding of assessors and participants generally was

The uptake of radionuclides from inadvertent consumption of soil by grazing animals

International Nuclear Information System (INIS)

Green, N.; Dodd, N.J.

1988-01-01

Investigations of the transfer to man of artificially-produced radionuclides through food chains have shown that the inadvertent consumption of soil by grazing animals can give variations in estimates of transfer coefficients, especially for radionuclides that are poorly absorbed by plant roots. Even small masses of soil adhering to herbage or directly ingested can make a significant contribution to the intake inventory in terms of activity. Although the activity concentrations of soil-contaminated herbage are elevated, the radionuclides associated with the soil may not necessarily be in a form which is easily absorbed by the animal. Attempts must be made, therefore, to quantify soil intake and the subsequent radionuclide uptake by this mechanism. A field investigation of the uptake of radionuclides by farm animals grazing near the Sellafield nuclear reprocessing plant has been pursued. The aims of the study were to estimate the transfer to muscle and other tissues. This paper describes the methods used to estimate both the soil intake and the consequent availability of radionuclides associated with the soil. The measurements were used to evaluate the contribution to tissue content of inadvertent consumption of soil by cows and sheep. 10 refs.; 2 tabs

Prevention of the inadvertent movement and illicit trafficking of radioactive and nuclear materials in Argentine border

International Nuclear Information System (INIS)

Bonet Duran, Stella M.; Canibano, Javier A.; Menossi, Sergio A.; Rodriguez, Carlos E.

2004-01-01

The inadvertent and illegal movements of radioactive and nuclear materials are issues of increased national and international awareness. States are progressively becoming more conscious of the need to adequately respond to these events. As regards the States' regulatory infrastructure, the design and enforcement of control and verification measures to maintain the continuity of knowledge about possession, use and movements of radioactive and nuclear materials is of critical importance. The existence of an appropriate legislative framework and a regulatory authority empowered to establish effective safety and security measures are essential to prevent inadvertent and illegal movements of nuclear materials and other radioactive materials. The events of Sep. 11, 2001 in the US have increased the States' awareness on the need to review their national infrastructure to identify additional measures against inadvertent and illegal movements of radioactive and nuclear materials as well as against sabotage of nuclear facilities. Argentina has more than a half- century- old tradition regarding the control and supervision of all activities involving the use of nuclear and radioactive materials. The Nuclear Regulatory Authority (ARN) of Argentina is the organization with federal competence in radiation protection, nuclear safety, safeguards and physical protection. It is responsible for issuing licenses and permits to any activity involving radioactive materials and for controlling and verifying that these activities are performed in full compliance with ARN standards and requirements. In the region, Argentina has been playing an important role in the prevention of illicit traffic of nuclear and radioactive materials for the last years within the framework of Security Commission of MERCOSUR. The last goals of this initiative are to define and coordinate actions and to establish a set of common operational procedures in the countries participating in the mentioned multilateral

Inadvertent Splenectomy During Resection for Colorectal Cancer Does Not Increase Long-term Mortality in a Propensity Score Model: A Nationwide Cohort Study.

Science.gov (United States)

Lolle, Ida; Pommergaard, Hans-Christian; Schefte, David F; Bulut, Orhan; Krarup, Peter-Martin; Rosenstock, Steffen J

2016-12-01

Previous studies suggest that long-term mortality is increased in patients who undergo splenectomy during surgery for colorectal cancer. The reason for this association remains unclear. The purpose of this study was to investigate the association between inadvertent splenectomy attributed to iatrogenic lesion to the spleen during colorectal cancer resections and long-term mortality in a national cohort of unselected patients. This was a retrospective, nationwide cohort study. Data were collected from the database of the Danish Colorectal Cancer Group and merged with data from the National Patient Registry and the National Pathology Databank. Danish patients with colorectal cancer undergoing curatively intended resection between 2001 and 2011 were included in the study. The primary outcome was long-term mortality for patients surviving 30 days after surgery. Secondary outcomes were 30-day mortality and risk factors for inadvertent splenectomy. Multivariable and propensity-score matched Cox regression analyses were used to adjust for potential confounding. In total, 23,727 patients were included, of which 277 (1.2%) underwent inadvertent splenectomy. There was no association between inadvertent splenectomy and long-term mortality (adjusted HR = 1.15 (95% CI, 0.95-1.40); p = 0.16) in the propensity score-matched model, whereas 30-day mortality was significantly increased (adjusted HR = 2.31 (95% CI, 1.71-3.11); p splenectomy was most often seen during left hemicolectomy (left hemicolectomy vs right hemicolectomy: OR = 24.76 (95% CI, 15.30-40.06); p splenectomy during resection for colorectal cancer does not seem to increase long-term mortality. The previously reported reduced overall survival after inadvertent splenectomy may be explained by excess mortality in the immediate postoperative period.

Marginalization of the Youth

DEFF Research Database (Denmark)

Jensen, Niels Rosendal

2009-01-01

The article is based on a key note speach in Bielefeld on the subject "welfare state and marginalized youth", focusing upon the high ambition of expanding schooling in Denmark from 9 to 12 years. The unintended effect may be a new kind of marginalization.......The article is based on a key note speach in Bielefeld on the subject "welfare state and marginalized youth", focusing upon the high ambition of expanding schooling in Denmark from 9 to 12 years. The unintended effect may be a new kind of marginalization....

Marginal and happy? The need for uniqueness predicts the adjustment of marginal immigrants.

Science.gov (United States)

Debrosse, Régine; de la Sablonnière, Roxane; Rossignac-Milon, Maya

2015-12-01

Marginalization is often presented as the strategy associated with the worst adjustment for immigrants. This study identifies a critical variable that buffers marginal immigrants from the negative effects of marginalization on adjustment: The need for uniqueness. In three studies, we surveyed immigrants recruited on university campuses (n = 119, n = 116) and in the field (n = 61). Among marginal immigrants, a higher need for uniqueness predicted higher self-esteem (Study 1), affect (Study 2), and life satisfaction (Study 3), and marginally higher happiness (Study 2) and self-esteem (Study 3). No relationship between the need for uniqueness and adjustment was found among non-marginal immigrants. The adaptive value of the need for uniqueness for marginal immigrants is discussed. © 2015 The British Psychological Society.

Expert judgement on inadvertent human intrusion into the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

Hora, S.C.; von Winterfeldt, D.; Trauth, K.M.

1991-12-01

Four expert-judgment teams have developed analyses delineating possible future societies in the next 10,000 years in the vicinity of the Waste Isolation Pilot Plant (WIPP). Expert-judgment analysis was used to address the question of future societies because neither experimentation, observation, nor modeling can resolve such uncertainties. Each of the four, four-member teams, comprised of individuals with expertise in the physical, social, or political sciences, developed detailed qualitative assessments of possible future societies. These assessments include detailed discussions of the underlying physical and societal factors that would influence society and the likely modes of human-intrusion at the WIPP, as well as the probabilities of intrusion. Technological development, population growth, economic development, conservation of information, persistence of government control, and mitigation of danger from nuclear waste were the factors the teams believed to be most important. Likely modes of human-intrusion were categorized as excavation, disposal/storage, tunneling, drilling, and offsite activities. Each team also developed quantitative assessments by providing probabilities of various alternative futures, of inadvertent human intrusion, and in some cases, of particular modes of intrusion. The information created throughout this study will be used in conjunction with other types of information, including experimental data, calculations from physical principles and computer models, and perhaps other judgments, as input to ''performance assessment.'' The more qualitative results of this study will be used as input to another expert panel considering markers to deter inadvertent human intrusion at the WIPP

Inadvertent Splenectomy During Resection for Colorectal Cancer Does Not Increase Long-term Mortality in a Propensity Score Model

DEFF Research Database (Denmark)

Lolle, Ida; Pommergaard, Hans-Christian; Schefte, David F

2016-01-01

BACKGROUND: Previous studies suggest that long-term mortality is increased in patients who undergo splenectomy during surgery for colorectal cancer. The reason for this association remains unclear. OBJECTIVE: The purpose of this study was to investigate the association between inadvertent...... splenectomy attributed to iatrogenic lesion to the spleen during colorectal cancer resections and long-term mortality in a national cohort of unselected patients. DESIGN: This was a retrospective, nationwide cohort study. SETTINGS: Data were collected from the database of the Danish Colorectal Cancer Group...... for patients surviving 30 days after surgery. Secondary outcomes were 30-day mortality and risk factors for inadvertent splenectomy. Multivariable and propensity-score matched Cox regression analyses were used to adjust for potential confounding. RESULTS: In total, 23,727 patients were included, of which 277...

93-106, 2015 93 Multilevel random effect and marginal models

African Journals Online (AJOL)

Multilevel random effect and marginal models for longitudinal data ... and random effect models that take the correlation among measurements of the same subject ... comparing the level of redness, pain and irritability ... clinical trial evaluating the safety profile of a new .... likelihood-based methods to compare models and.

The Effect of Sintering Time on the Marginal Fit of Zirconia Copings.

Science.gov (United States)

Khaledi, Amir Ali Reza; Vojdani, Mahroo; Farzin, Mitra; Pirouzi, Sudabeh; Orandi, Sepideh

2018-01-03

This study analyzed the effect of different sintering times on the marginal adaptation of zirconia ceramic copings. Thirty copings of pre-sintered 3Y-TZP blanks were milled and subsequently sintered in a special furnace for three different durations (n = 10 per group). The sintering time was 1 hour, 15 minutes for IPS e.max ZirCAD, 4 hours 20 minutes for Speed ZrO 2, and 7 hours 20 minutes for the conventional ZrO 2 group. The marginal gaps of specimens were measured at 18 spots on the master die by employing a digital microscope. One-way ANOVA test compared the mean differences among the 3 groups (α = 0.05). The mean values for the marginal gap of the IPS e.max ZirCAD, Speed ZrO 2 , and conventional ZrO 2 groups were 41.06 ± 14.03, 43.03 ± 11.67, and 39.88 ± 15.23 μm, respectively. There was no statistically significant difference among the groups regarding the marginal gap. Different sintering times did not alter the marginal fit of the zirconia copings. The mean values of the marginal gap were within the clinically acceptable level for all three groups. © 2018 by the American College of Prosthodontists.

The effect of differentiated margin on futures market investors' behavior and structure An experimental research

Institute of Scientific and Technical Information of China (English)

Jin-hui Luo; Di-fang Wan; Yang Yang; Guang Yang

2011-01-01

Purpose-The purpose of this paper is to empirically analyze the role of differentiated margin system in leading investors' investing behavior and then optimize investor structure in futures markets.Design/methodology/approach-Using economic experimental research method,this paper designs and conducts a futures market experiment according to experimental research's basic norms,thus acquiring needed and credible empirical data.Findings-By analyzing the experimental data,it is found that compared with situations in futures markets that implement uniform margin system,investors' (especially speculators') futures open position and the ratio of their open position and futures turnover are both significantly higher,in futures markets that implement differentiated margin system.On the other hand,differentiated margin system has no effects on hedgers' futures turnover,but significantly reduces speculators' futures turnover.Research limitations/implications-The findings suggest that compared with uniform margin system,differentiated margin system is beneficial to effectively restrict both speculators' and hedgers' speculating behavior and lead hedgers' market participation.Practical implications-In order to resolve the problem of unreasonable investor structure in China's futures market,i.e.lack of hedgers and over-speculating China's futures market's regulators should reform the margin system and adopt differentiated margin system to lead investors' rational behavior and optimize investor structure.Originality/value-This paper empirically analyzes and verifies,for the first time,the roles of differentiated margin system in affecting investors' investing behavior.The futures market experiment designed and used in this study is a pioneering and exploratory experiment.

Effect of two prophylaxis methods on marginal gap of Cl Vresin-modified glass-ionomer restorations.

Science.gov (United States)

Kimyai, Soodabeh; Pournaghi-Azar, Fatemeh; Daneshpooy, Mehdi; Abed Kahnamoii, Mehdi; Davoodi, Farnaz

2016-01-01

Background. This study evaluated the effect of two prophylaxis techniques on the marginal gap of CI V resin-modified glass-ionomer restorations. Methods. Standard Cl V cavities were prepared on the buccal surfaces of 48 sound bovine mandibular incisors in this in vitro study. After restoration of the cavities with GC Fuji II LC resin-modified glass-ionomer, the samples were randomly assigned to 3 groups of 16. In group 1, the prophylactic procedures were carried out with rubber cup and pumice powder and in group 2 with air-powder polishing device (APD). In group 3 (control), the samples did not undergo any prophylactic procedures. Then the marginal gaps were measured. Two-way ANOVA was used to compare marginal gaps at the occlusal and gingival margins between the groups. Post hoc Tukey test was used for two-by-two comparisons. Statistical significance was set at P marginal gaps in terms of prophylactic techniques (P marginal gaps in the APD group compared to the pumice and rubber cup group, which in turn exhibited significantly larger marginal gaps compared to the control group (P marginal gaps were significant in terms of the margin type (P margins compared to the occlusal margins (P marginal gaps of Cl V resin-modified glass-ionomer restorations.

Inadvertent yellow fever vaccination of a patient with Crohn's disease treated with infliximab and methotrexate

DEFF Research Database (Denmark)

Ekenberg, C.; Friis-Møller, N.; Ulstrup, Thomas

2016-01-01

We present a case of a 56-year-old woman with Crohn's disease, treated with methotrexate and infliximab, who inadvertently received yellow fever vaccination (YFV) prior to a journey to Tanzania. She was not previously vaccinated against YF. YFV contains live-attenuated virus, and is contraindicated...... in patients treated with immunosuppressive drugs. Following vaccination, the patient fell ill with influenza-like illness. Elevated transaminase levels and YF viremia were detected. Despite being immunocompromised, the patient did not develop more severe adverse effects. Neutralising antibodies to YF virus...... were detected on day 14 following vaccination and remained protective at least 10 months after vaccination. Limited data is available on outcomes of YFV in patients receiving immunosuppressive therapy, including biologics, and we report this case as a reminder of vigilance of vaccine recommendations...

46 CFR 308.536 - Declaration where failure to comply with Clause 21 was inadvertent, Form MA-314.

Science.gov (United States)

2010-10-01

... TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Cargo Insurance Ii-Open Policy War Risk Cargo... Assured that fails inadvertently to maintain a collateral deposit fund or surety bond in an amount..., which may be obtained from the American War Risk Agency or MARAD. III—Facultative War Risk Cargo...

Marginal Fit of Metal-Ceramic Copings: Effect of Luting Cements and Tooth Preparation Design.

Science.gov (United States)

de Almeida, Juliana Gomes Dos Santos Paes; Guedes, Carlos Gramani; Abi-Rached, Filipe de Oliveira; Trindade, Flávia Zardo; Fonseca, Renata Garcia

2017-12-22

To evaluate the effect of the triad finish line design, axial wall convergence angle, and luting cement on the marginal fit of metal copings used in metal-ceramic crowns. Schematic dies and their respective copings were cast in NiCr alloy. The dies exhibited the following finish line/convergence angle combinations: sloping shoulder/6°, sloping shoulder/20°, shoulder/6°, shoulder/20°. Marginal fit was evaluated under a stereomicroscope, before and after cementation. Copings were air-abraded with 50 μm Al 2 O 3 particles and cemented with Cimento de Zinco, RelyX U100, or Panavia F cements (n = 10/group). Data were square-root transformed and analyzed by 3-way factorial random effect model and Tukey's post hoc test (α = 0.05). Statistical analysis showed significance for the interactions finish line and convergence angle (p marginal discrepancy when compared to the other finish line/convergence angle combinations, which were statistically similar among each other. For both convergence angles and for all luting cements, the marginal discrepancy was significantly higher after cementation. Before and after cementation, 6° provided better marginal fit than 20°. After cementation, Panavia F provided higher marginal discrepancy than Cimento de Zinco. Lower convergence angle combined with shoulder and a low-consistency luting cement is preferable to cement metal copings. © 2017 by the American College of Prosthodontists.

Inadvertent injection of formalin mistaken for local anesthetic agent: report of a case.

Science.gov (United States)

Arakeri, Gururaj; Brennan, Peter A

2012-05-01

Chemical facial cellulitis, while commonly seen in domestic accidents or attempted suicide, is uncommon in the dental office and hence rarely addressed in the dental literature. We present an unusual case of chemical facial cellulitis caused by inadvertent injection of formalin into the soft tissues of the oral cavity, which was mistaken for local anesthesia solution. This report comprises the immediate symptoms, possible root cause, and management of the difficult situation. We also provide some guidelines to avoid such unfortunate events. Copyright © 2012 Elsevier Inc. All rights reserved.

Passive Barriers to Inadvertent Human Intrusion for Use at the Nevada Test Site

International Nuclear Information System (INIS)

NSTec Environmental Management

2007-01-01

In July1996, BN transmitted Passive Barriers to Inadvertent Human Intrusion for Use at the Nevada Test Site to the United States Department of Energy, under Contract DE-AC08-91NV10833. The 1996 paper had a limited distribution and was not reviewed for public release. In 2007, National Security Technologies LLC (NSTec) made minor revisions to conform to current editorial standards of the NNSA/NSO and to meet current security requirements for public release. The primary purpose of this study was to identify types of engineered passive barriers that could deter future intrusion into buried low-level radioactive waste, particularly intrusion by drilling water wells. The study considered drilling technology, many natural and man-made materials, and both underground and above-ground barriers. Based on cost and effectiveness, the report recommended underground barriers consisting of a layer of rubble or tires. An aboveground barrier mound might also prove effective, but would cost more, and may become an attractive nuisance (e.g., might, after their purpose has been forgotten, encourage exploration for the sake of satisfying curiosity). Advances in drilling technology could render any engineered barriers ineffective if there is motivation to penetrate the barriers

Adherence to a Gluten-Free Diet in Mexican Subjects with Gluten-Related Disorders: A High Prevalence of Inadvertent Gluten Intake.

Science.gov (United States)

Ramírez-Cervantes, Karen Lizzette; Romero-López, Angélica Viridiana; Núñez-Álvarez, Carlos Alberto; Uscanga-Domínguez, Luis F

2016-01-01

The rate of compliance with a gluten-free diet in patients with gluten-related disorders is unknown in most Latin American countries. To study the adherence to a gluten-free diet of Mexican individuals with celiac disease and nonceliac gluten sensitivity at the time of their first medical and nutritional consultation at a tertiary referral center. A cross-sectional study was performed. A specific questionnaire was used to gather information on demographics, clinical condition, and self-reported adherence to a gluten-free diet, and to determine strict compliance and intentional or inadvertent gluten consumption. All questionnaires were applied by a nutritionist with expertise in gluten-related disorders. Fifty-six patients with celiac disease and 24 with non-celiac gluten sensitivity were included. Overall, 46 (57.5%) subjects perceived themselves as strictly adherent; however, inadvertent gluten intake was frequent in both celiac disease and non-celiac gluten sensitivity patients (39.2 vs. 33.3%; p = 0.2). Intentional consumption was more prevalent in subjects with celiac disease (48.8 vs. 29.1%; p = 0.048) and individuals with non-celiac gluten sensitivity showed better adherence (37.5 vs. 12.5%; p = 0.035). The importance of a gluten-free diet is underestimated by Mexican patients with celiac disease. The role of a team with expertise in gluten-related disorders is essential to identify inadvertent gluten intake.

13 CFR 126.308 - What happens if SBA inadvertently omits a qualified HUBZone SBC from the List?

Science.gov (United States)

2010-01-01

... writing at U.S. Small Business Administration, 409 Third Street, SW., Washington, DC 20416 or via e-mail... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What happens if SBA inadvertently omits a qualified HUBZone SBC from the List? 126.308 Section 126.308 Business Credit and Assistance...

Effects of repeated firing on the marginal accuracy of Co-Cr copings fabricated by selective laser melting.

Science.gov (United States)

Zeng, Li; Zhang, Yong; Liu, Zheng; Wei, Bin

2015-02-01

Selective laser melting (SLM) is a technique used to fabricate Co-Cr dental restorations; however, because marginal accuracy is important for the long-term success of restorations, the marginal accuracy of SLM after repeated firings must be considered. The purpose of this study was to evaluate the marginal accuracy of dental Co-Cr alloy copings fabricated by SLM and to investigate the effects of repeated firing on the marginal fit of these copings. SLM-fabricated and cast Co-Cr alloy copings (n=15) were prepared for a zirconia die. The marginal gap widths of each group were evaluated with a silicone replica technique after the first, third, fifth, and seventh firing cycle. The thickness of the reference point was measured with a stereomicroscope with ×100 magnification. Analysis of variance was used to evaluate the effect of repeated firing on the marginal accuracy of the 2 alloys. The Student t test was used to compare the marginal gap widths of the SLM-fabricated and cast Co-Cr alloy copings after repeated firing (α=.05). The marginal gap width values between the 2 groups at all firing periods were statistically significant (P.05). The SLM copings demonstrated superior marginal accuracy at all firings. Repeated firing had no significant influence on the marginal accuracy of both copings, and the marginal fit of both copings after repeated firing was within a clinically acceptable range. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Inadvertent puncture of the aortic noncoronary cusp during postoperative left atrial tachycardia ablation

Directory of Open Access Journals (Sweden)

Dursun Aras, MD

2015-08-01

Full Text Available Transseptal catheterization has become part of the interventional electrophysiologist׳s technical armamentarium since the development of left atrial catheter ablation and percutaneous technologies for treating mitral and aortic valve disease. Although frequently performed, the procedure׳s most feared complication is aortic root penetration. Focal atrial tachycardia has been described as the most common late sequela of surgical valve replacements. We present a complicated case involving the inadvertent delivery of an 8 French sheath across the noncoronary cusp during radiofrequency catheter ablation for left atrial tachycardia originating from the mitral annulus in a patient with prior mitral valve replacement.

Testing for marginal linear effects in quantile regression

KAUST Repository

Wang, Huixia Judy

2017-10-23

The paper develops a new marginal testing procedure to detect significant predictors that are associated with the conditional quantiles of a scalar response. The idea is to fit the marginal quantile regression on each predictor one at a time, and then to base the test on the t-statistics that are associated with the most predictive predictors. A resampling method is devised to calibrate this test statistic, which has non-regular limiting behaviour due to the selection of the most predictive variables. Asymptotic validity of the procedure is established in a general quantile regression setting in which the marginal quantile regression models can be misspecified. Even though a fixed dimension is assumed to derive the asymptotic results, the test proposed is applicable and computationally feasible for large dimensional predictors. The method is more flexible than existing marginal screening test methods based on mean regression and has the added advantage of being robust against outliers in the response. The approach is illustrated by using an application to a human immunodeficiency virus drug resistance data set.

Testing for marginal linear effects in quantile regression

KAUST Repository

Wang, Huixia Judy; McKeague, Ian W.; Qian, Min

2017-01-01

The paper develops a new marginal testing procedure to detect significant predictors that are associated with the conditional quantiles of a scalar response. The idea is to fit the marginal quantile regression on each predictor one at a time, and then to base the test on the t-statistics that are associated with the most predictive predictors. A resampling method is devised to calibrate this test statistic, which has non-regular limiting behaviour due to the selection of the most predictive variables. Asymptotic validity of the procedure is established in a general quantile regression setting in which the marginal quantile regression models can be misspecified. Even though a fixed dimension is assumed to derive the asymptotic results, the test proposed is applicable and computationally feasible for large dimensional predictors. The method is more flexible than existing marginal screening test methods based on mean regression and has the added advantage of being robust against outliers in the response. The approach is illustrated by using an application to a human immunodeficiency virus drug resistance data set.

93-106, 2015 93 Multilevel random effect and marginal models

African Journals Online (AJOL)

injected by the candidate vaccine have a lower or higher risk for the occurrence of ... outcome relationship and test whether subjects inject- ... contains an agent that resembles a disease-causing ... to have different random effect variability at each cat- ... In the marginal models settings, the responses are ... Behavior as usual.

Effect of different resin luting cements on the marginal fit of lithium disilicate pressed crowns.

Science.gov (United States)

Mounajjed, Radek; Salinas, Thomas J; Ingr, Tomas; Azar, Basel

2017-11-15

The vertical marginal discrepancy of restorations can increase upon cementation, and poor marginal fit can lead to cement dissolution, marginal discoloration, microleakage, and secondary caries. The amount of increase is related to the type of luting cement used, but how lithium disilicate pressed crowns are affected by different resin cements is unclear. The purpose of this in vitro study was to compare the effect of using different resin luting cements on the vertical marginal discrepancy of lithium disilicate pressed crowns. A total of 18 intact extracted mandibular third molars were disinfected in a solution of 10% formalin for 7 days and were then prepared to receive a ceramic crown. Impressions were made with polyvinyl siloxane and lithium disilicate pressed crowns made and cemented with 1 of 3 resin luting cements. The marginal discrepancy was measured at 4 points on the finishing line of each tooth, with optical microscopy at ×200 magnification before and after cementation. Statistical analysis was done with the Kruskal-Wallis test to compare the median marginal increase among the 3 groups. The least amount of marginal increase after cementation was with Harvard PremiumFlow cement, with an average marginal increase of 42 ±11 μm. RelyX Ultimate cement increased the margins by an average 45 ±29 μm. The highest marginal increase was found in the Enamel Plus HRi preheated composite resin group (116 ±47 μm). The marginal increase of pressed crowns cemented with preheated composite resin (Enamel Plus HRi) exceeded the clinically acceptable range of marginal discrepancy. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Marginal Effects of a Gross Income Increase for a Single Parent Family in Six European Countries

DEFF Research Database (Denmark)

Willumsen, Marie

the contributions to the combined marginal rate, the marginal effective tax rate, METR, using the OECD term, from taxation, payment for childcare, tapering of housing benefits and sometimes child benefits, when the income varies from a low level to a high level for a single parent family. Six countries are included......High marginal tax rates constitute an issue in several countries because they are supposed to create barriers for increased labour supply. It is, however, often the case that relatively low income families with children face substantially higher combined marginal rates than even the highest...

Marginal-Fermi-liquid theory and the isotope effect

International Nuclear Information System (INIS)

Nicol, E.J.; Carbotte, J.P.

1991-01-01

In the marginal-Fermi-liquid model, the coupling between two electrons is via charge (attractive) and spin (repulsive) fluctuations, and so it does not exhibit an isotope effect. To include this effect, an additional phonon contribution must be introduced. Using the case of YBa 2 Cu 3 O 7 , for illustrative purposes, with a total isotope effect coefficient of β tot congruent 0.05 at a T c of 90 K, we find that the implied electron-phonon mass renormalization is very small for coupling to high-energy phonons but increases rapidly with decreasing phonon frequency or an increasing amount of spin fluctuations. Finally, we examine how β increases with decreasing T c when charge fluctuations are reduced or spin fluctuations augmented

Effect of post-implant edema on prostate brachytherapy treatment margins

International Nuclear Information System (INIS)

Reed, Daniel R.; Wallner, Kent; Ford, Eric; Mueller, Amy; Merrick, Gregory; Maki, Jeffrey; Sutlief, Steven; Butler, Wayne

2005-01-01

Purpose: To determine if postimplant prostate brachytherapy treatment margins calculated on Day 0 differ substantially from those calculated on Day 30. Methods: Thirty patients with 1997 American Joint Commission on Cancer clinical stage T1-T2 prostatic carcinoma underwent prostate brachytherapy with I-125 prescribed to 144 Gy. Treatment planning methods included using loose seeds in a modified peripheral loading pattern and treatment margins (TMs) of 5-8 mm. Postimplant plain radiographs, computed tomography scans, and magnetic resonance scans were obtained 1-4 hours after implantation (Day 0). A second set of imaging studies was obtained at 30 days after implantation (Day 30) and similarly analyzed. Treatment margins were measured as the radial distance in millimeters from the prostate edge to the 100% isodose line. The TMs were measured and tabulated at 90 o intervals around the prostate periphery at 0.6-cm intervals. Each direction was averaged to obtain the mean anterior, posterior, left, and right margins. Results: The mean overall TM increased from 2.6 mm (±2.3) on Day 0 to 3.5 mm (±2.4) on Day 30. The mean anterior margin increased from 1.2 mm on Day 0 to 1.8 mm on Day 30. The posterior margin increased from 1.2 mm on Day 0 to 2.8 mm on Day 30. The lateral treatment margins increased most over time, with mean right treatment margin increasing from 3.9 mm on Day 0 to 4.7 mm on Day 30. Conclusion: Treatment margins appear to be durable in the postimplant period, with a clinically insignificant increase from Day 0 to Day 30

The Effects of Marginal Deviations on Behavioral Development.

Science.gov (United States)

Caprara, Gian Vittorio; Dodge, Kenneth A; Pastorelli, Concetta; Zelli, Arnaldo

2006-01-01

This investigation was conceptually framed within the theory of marginal deviations (Caprara & Zimbardo, 1996) and sought evidence for the general hypothesis that some children who initially show marginal behavioral problems may, over time, develop more serious problems depending partly on other personal and behavioral characteristics. To this end, the findings of two studies conducted, respectively, with American elementary school children and Italian middle school students are reviewed. These two studies show that hyperactivity, cognitive difficulties, low special preference, and lack of prosocial behavior increase a child's risk for growth in aggressive behavior over several school years. More importantly, they also show that equivalent levels of these risk factors have a greater impact on the development of children who, early on, were marginally aggressive.

Analyses of natural resources in 10 CFR Part 60 as related to inadvertent human intrusion

International Nuclear Information System (INIS)

Miklas, M.P.; Lefevre, H.E.

1993-01-01

The purpose of this paper is to examine the intent of the regulatory language of the portions of 10 CFR Part 60 which deal with considerations of the natural resources of a proposed geologic repository for high-level radioactive wastes as they relate to inadvertent human intrusion. Four Potentially Adverse Conditions (PAC) the requirements of 10 CFR 60.21(c)(13) are shown to be related to natural resources. Groundwater is identified as a natural resource known to be present at Yucca Mountain, Nevada. For economic considerations of natural resources, the open-quotes foreseeable futureclose quotes is thought to be no more than 50 years. Two of the topics addressed by the PACs, subsurface mining and drilling at a proposed repository site, are pre-site-characterization activities which must be evaluated in the context of repository performance criteria set by the US EPA standard, 40 CFR Part 191. An alternative US DOE compliance demonstration to another PAC, 10 CFR 60.122(c)(17), might be to use an open-quotes explorationist perspectiveclose quotes of natural resource assessment. The Commission intends for DOE to evaluate the likelihood and consequence of inadvertent human intrusion into a geologic repository as a result of exploration or exploitation of natural resources within or near a proposed high-level radioactive waste geologic repository

75 FR 60074 - Certain Frozen Warmwater Shrimp From the Socialist Republic of Vietnam: Notice of Correction to...

Science.gov (United States)

2010-09-29

... Trade Administration, Department of Commerce. DATES: Effective Date: September 29, 2010. FOR FURTHER... table listing the antidumping duty rates for the companies in the Socialist Republic of Vietnam, several companies were inadvertently omitted. Also, incorrect antidumping duty margins were listed for three of the...

Study for on-line system to identify inadvertent control rod drops in PWR reactors using ex-core detector and thermocouple measures

International Nuclear Information System (INIS)

Souza, Thiago J.; Medeiros, Jose A.C.C.; Goncalves, Alessandro C.

2015-01-01

Accidental control rod drops event in PWR reactors leads to an unsafe operating condition. It is important to quickly identify the rod to minimize undesirable effects in such a scenario. In this event, there is a distortion in the power distribution and temperature in the reactor core. The goal of this study is to develop an on-line model to identify the inadvertent control rod dropped in PWR reactor. The proposed model is based on physical correlations and pattern recognition of ex-core detector responses and thermocouples measures. The results of the study demonstrated the feasibility of an on-line system, contributing to safer operation conditions and preventing undesirable effects, as its shutdown. (author)

Study for on-line system to identify inadvertent control rod drops in PWR reactors using ex-core detector and thermocouple measures

Energy Technology Data Exchange (ETDEWEB)

Souza, Thiago J.; Medeiros, Jose A.C.C.; Goncalves, Alessandro C., E-mail: tsouza@nuclear.ufrj.br, E-mail: canedo@lmp.ufrj.br, E-mail: alessandro@nuclear.ufrj.br [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear

2015-07-01

Accidental control rod drops event in PWR reactors leads to an unsafe operating condition. It is important to quickly identify the rod to minimize undesirable effects in such a scenario. In this event, there is a distortion in the power distribution and temperature in the reactor core. The goal of this study is to develop an on-line model to identify the inadvertent control rod dropped in PWR reactor. The proposed model is based on physical correlations and pattern recognition of ex-core detector responses and thermocouples measures. The results of the study demonstrated the feasibility of an on-line system, contributing to safer operation conditions and preventing undesirable effects, as its shutdown. (author)

Limitations of ''margin'' in qualification tests

International Nuclear Information System (INIS)

Clough, R.L.; Gillen, K.T.

1984-01-01

We have carried out investigations of polymer radiation degradation behaviors which have brought to light a number of reasons why this concept of margin can break down. First of all, we have found that dose-rate effects vary greatly in magnitude. Thus, based on high dose-rate testing, poor materials with large dose-rate effects may be selected over better materials with small effects. Also, in certain cases, material properties have been found to level out (as with PVC) or reverse trend (as with buna-n) at high doses, so that ''margin'' may be ineffective, misleading, or counterproductive. For Viton, the material properties were found to change in opposite directions at high and low dose rates, making ''margin'' inappropriate. The underlying problem with the concept of ''margin'' is that differences in aging conditions can lead to fundamental differences in degradation mechanisms

Study of 'inadvertent human intrusion or rare natural event scenarios' for sub-surface disposal of radioactive waste

International Nuclear Information System (INIS)

Nakatani, Takayoshi; Ishitoya, Kimihide; Funabashi, Hideyuki; Sugaya, Toshikatsu; Sone, Tomoyuki; Shimada, Hidemitsu; Nakai, Kunihiro

2010-03-01

Japan Atomic Energy Agency (JAEA) is making preparations for the sub-surface disposal of radioactive wastes, in an integrated fashion according to the properties of the waste material regardless of the generators or waste sources. In this study, 'Inadvertent Human Intrusion or Rare Natural Event Scenarios' of 'Three Types scenarios' was considered according to the standard of the Atomic Energy Society of Japan (AESJ) on the sub-surface disposal system that was based on 'Basic Policy for Safety Regulation Concerning Land Disposal of Low-Level Radioactive Waste (Interim Report)' by Nuclear Safety Commission of Japan (NSC). Selection of the assessed scenarios, development of the assessment tool and preliminary exposure dose assessment for general public were conducted. Among the assessed scenarios, the exposure dose of 'well water drinking scenario' was the highest under the very conservative assessment condition. This scenario assumed that the groundwater in Excavation Disturbed Zone (EDZ) was directly used as drinking water without any dilution. Although this was very conservative condition and the result exceeded 10 mSv/y, it stayed under the upper limit of standard dose value for 'Inadvertent Human Intrusion or Rare Natural Event Scenarios' (10 - 100 mSv/y). (author)

Future coral reef habitat marginality: Temporal and spatial effects of climate change in the Pacific basin

Science.gov (United States)

Guinotte, J.M.; Buddemeier, R.W.; Kleypas, J.A.

2003-01-01

Marginal reef habitats are regarded as regions where coral reefs and coral communities reflect the effects of steady-state or long-term average environmental limitations. We used classifications based on this concept with predicted time-variant conditions of future climate to develop a scenario for the evolution of future marginality. Model results based on a conservative scenario of atmospheric CO2 increase were used to examine changes in sea surface temperature and aragonite saturation state over the Pacific Ocean basin until 2069. Results of the projections indicated that essentially all reef locations are likely to become marginal with respect to aragonite saturation state. Significant areas, including some with the highest biodiversity, are expected to experience high-temperature regimes that may be marginal, and additional areas will enter the borderline high temperature range that have experienced significant ENSO-related bleaching in the recent past. The positive effects of warming in areas that are presently marginal in terms of low temperature were limited. Conditions of the late 21st century do not lie outside the ranges in which present-day marginal reef systems occur. Adaptive and acclimative capabilities of organisms and communities will be critical in determining the future of coral reef ecosystems.

Endovascular repair of inadvertent arterial injury induced by central venous catheterization using a vascular closure device: A case report

Energy Technology Data Exchange (ETDEWEB)

Kim, So Hee; Jang, Woo Jin; Oh, Ju Heyon; Song, Yun Gyu [Samsung Changwon Hospital, Sungkyunkwan University School of Medicine, Changwon (Korea, Republic of)

2017-04-15

Central venous catheterization can cause various complications. Inadvertent subclavian artery catheterization was performed during insertion of a central venous catheter in a 73-year-old man suffering from panperitonitis due to small-bowel perforation. Endovascular treatment was conducted to treat the injured subclavian artery with a FemoSeal vascular closure device.

Temporal variation in population size of European bird species: effects of latitude and marginality of distribution.

Directory of Open Access Journals (Sweden)

José J Cuervo

Full Text Available In the Northern Hemisphere, global warming has been shown to affect animal populations in different ways, with southern populations in general suffering more from increased temperatures than northern populations of the same species. However, southern populations are also often marginal populations relative to the entire breeding range, and marginality may also have negative effects on populations. To disentangle the effects of latitude (possibly due to global warming and marginality on temporal variation in population size, we investigated European breeding bird species across a latitudinal gradient. Population size estimates were regressed on years, and from these regressions we obtained the slope (a proxy for population trend and the standard error of the estimate (SEE (a proxy for population fluctuations. The possible relationships between marginality or latitude on one hand and slopes or SEE on the other were tested among populations within species. Potentially confounding factors such as census method, sampling effort, density-dependence, habitat fragmentation and number of sampling years were controlled statistically. Population latitude was positively related to regression slopes independent of marginality, with more positive slopes (i.e., trends in northern than in southern populations. The degree of marginality was positively related to SEE independent of latitude, with marginal populations showing larger SEE (i.e., fluctuations than central ones. Regression slopes were also significantly related to our estimate of density-dependence and SEE was significantly affected by the census method. These results are consistent with a scenario in which southern and northern populations of European bird species are negatively affected by marginality, with southern populations benefitting less from global warming than northern populations, thus potentially making southern populations more vulnerable to extinction.

Similar effects of substance P on learning and memory function between hippocampus and striatal marginal division

Science.gov (United States)

Yu, Yan; Zeng, Changchun; Shu, Siyun; Liu, Xuemei; Li, Chuhua

2014-01-01

Substance P is an endogenous neurokinin that is present in the central and peripheral nervous systems. The neuropeptide substance P and its high-affinity receptor neurokinin 1 receptor are known to play an important role in the central nervous system in inflammation, blood pressure, motor behavior and anxiety. The effects of substance P in the hippocampus and the marginal division of the striatum on memory remain poorly understood. Compared with the hippocampus as a control, immunofluorescence showed high expression of the substance P receptor, neurokinin 1, in the marginal division of the striatum of normal rats. Unilateral or bilateral injection of an antisense oligonucleotide against neurokinin 1 receptor mRNA in the rat hippocampus or marginal division of the striatum effectively reduced neurokinin 1 receptor expression. Independent of injection site, rats that received this antisense oligonucleotide showed obviously increased footshock times in a Y-maze test. These results indicate that the marginal division of the striatum plays a similar function in learning and memory to the hippocampus, which is a valuable addition to our mechanistic understanding of the learning and memory functions of the marginal division of the striatum. PMID:25206901

Marginal Employment Growth Effects In The South African Economy

OpenAIRE

Irrshad Kaseeram; Darma Mahadea

2017-01-01

South Africa relative to its peers (upper middle income countries) suffers from high unemployment and sub-optimal economic growth. This study investigates the ‘marginal effects of employment’ with respect to real output and capital in South Africa, using annual data covering the period 1946-2015.  It estimates the responsiveness of employment to real output growth and capital, employing the short and long-run dynamic interactions between these variables via the application of the VAR/VECM Joh...

Task Group on Safety Margins Action Plan (SMAP). Safety Margins Action Plan - Final Report

International Nuclear Information System (INIS)

Hrehor, Miroslav; Gavrilas, Mirela; Belac, Josef; Sairanen, Risto; Bruna, Giovanni; Reocreux, Michel; Touboul, Francoise; Krzykacz-Hausmann, B.; Park, Jong Seuk; Prosek, Andrej; Hortal, Javier; Sandervaag, Odbjoern; Zimmerman, Martin

2007-01-01

The international nuclear community has expressed concern that some changes in existing plants could challenge safety margins while fulfilling all the regulatory requirements. In 1998, NEA published a report by the Committee on Nuclear Regulatory Activities on Future Nuclear Regulatory Challenges. The report recognized 'Safety margins during more exacting operating modes' as a technical issue with potential regulatory impact. Examples of plant changes that can cause such exacting operating modes include power up-rates, life extension or increased fuel burnup. In addition, the community recognized that the cumulative effects of simultaneous changes in a plant could be larger than the accumulation of the individual effects of each change. In response to these concerns, CSNI constituted the safety margins action plan (SMAP) task group with the following objectives: 'To agree on a framework for integrated assessments of the changes to the overall safety of the plant as a result of simultaneous changes in plant operation / condition; To develop a CSNI document which can be used by member countries to assess the effect of plant change on the overall safety of the plant; To share information and experience.' The two approaches to safety analysis, deterministic and probabilistic, use different methods and have been developed mostly independently of each other. This makes it difficult to assure consistency between them. As the trend to use information on risk (where the term risk means results of the PSA/PRA analysis) to support regulatory decisions is growing in many countries, it is necessary to develop a method of evaluating safety margin sufficiency that is applicable to both approaches and, whenever possible, integrated in a consistent way. Chapter 2 elaborates on the traditional view of safety margins and the means by which they are currently treated in deterministic analyses. This chapter also discusses the technical basis for safety limits as they are used today

Climate change and its marginalizing effect on agriculture

Energy Technology Data Exchange (ETDEWEB)

Mestre-Sanchis, Fernando [Agriculture and Food Department, University of La Rioja (Spain); Feijoo-Bello, Maria Luisa [Economics Department, University of Zaragoza (Spain)

2009-01-15

The agriculture of some areas considered marginal in the EU agricultural context is being questioned due to its low productivity and growing dependence on economic aid programs Common Agricultural Policy (CAP). This study shows that climate change increases these areas marginalisation of since worsens crop growth conditions. The influence of climate change on the agricultural sector is analyzed using the Multicriteria Decision Paradigm with information provided by the Erosion-Productivity Impact Calculator (EPIC) and a General Circulation Model (GCM) as inputs for multicriteria mathematical programming models. The results obtained show climate change effects on the crop portfolio. Further results suggest that climate change effects are not only economics and environmental, reducing the suitable area for crops, but also social as it causes loss of jobs in the agricultural sector. (author)

Effect of metal selection and porcelain firing on the marginal accuracy of titanium-based metal ceramic restorations.

Science.gov (United States)

Shokry, Tamer E; Attia, Mazen; Mosleh, Ihab; Elhosary, Mohamed; Hamza, Tamer; Shen, Chiayi

2010-01-01

Titanium is the most biocompatible metal used for dental casting; however, there is concern about its marginal accuracy after porcelain application since this aspect has direct influence on marginal fit. The purpose of this study was to determine the effect that metal selection and the porcelain firing procedure have on the marginal accuracy of metal ceramic prostheses. Cast CP Ti, milled CP Ti, cast Ti-6Al-7Nb, and cast Ni-Cr copings (n=5) were fired with compatible porcelains (Triceram for titanium-based metals and VITA VMK 95 for Ni-Cr alloy). The Ni-Cr alloy fired with its porcelain served as the control. Photographs of metal copings placed on a master die were made. Marginal discrepancy was determined on the photographs using an image processing program at 8 predetermined locations before airborne-particle abrasion for porcelain application, after firing of the opaque layer, and after firing of the dentin layer. Repeated-measures 2-way ANOVA was used to investigate the effect of metal selection and firing stage, and paired t tests were used to determine the effect of each firing stage within each material group (alpha=.05). ANOVA showed that both metal selection and firing stage significantly influenced the measured marginal discrepancy (Pcast Ti-6Al-7Nb alloy (P=.003). Titanium copings fabricated by CAD/CAM demonstrated the least marginal discrepancy among all groups, while the base metal (Ni-Cr) groups exhibited the most discrepancy of all groups tested. Copyright 2010 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

THE EFFECTS OF CHANGING MARGIN LEVELS ON FUTURES OPTIONS PRICE

Institute of Scientific and Technical Information of China (English)

Yanling GU; Juan LI

2006-01-01

The paper studies the effects of changing margin levels on the price of futures options and how to organize a market maker's position. Black model (1976) becomes a special case of this paper.The paper prices futures options by duplicating them and adopting the theory of Backward Stochastic Differential Equations (BSDEs for short). Furthermore, the price of a futures option is the unique solution to a nonlinear BSDE.

Experimental Modeling of the Effect of Terrain Slope on Marginal Burning

Science.gov (United States)

X. Zhou; S. Mahalingam; D. Weise

2005-01-01

A series of laboratory fire spread experiments were completed to analyze the effect of terrain slope on marginal burning behavior of live chaparral shrub fuels that grow in the mountains of southern California. We attempted to burn single species fuel beds of four common chaparral plants under various fuel bed configurations and ambient conditions. Seventy-three (or 42...

The use of protective barriers to deter inadvertent human intrusion into a mined geologic facility for the disposal of radioactive waste: A review of previous investigations and potential concepts

International Nuclear Information System (INIS)

Tolan, T.L.

1993-06-01

Sandia National Laboratories is evaluating the feasibility of developing protective barrier system for the Waste Isolation Pilot Plant (WIPP) to thwart inadvertent human intrusion into this radioactive-waste disposal system for a period of 9,900 years after assumed loss of active institutional controls. The protective barrier system would be part of a series of enduring passive institutional controls whose long-term function will be to reduce the likelihood of inadvertent human activities (e.g., exploratory drilling for resources) that could disrupt the WIPP disposal system

Pregnancy outcome after 1st-trimester inadvertent exposure to barium sulphate as a contrast media for upper gastrointestinal tract radiography.

Science.gov (United States)

Han, B H; Lee, K S; Han, J Y; Choi, J S; Ahn, H K; Ryu, H M; Yang, J H; Han, H W; Nava-Ocampo, A A

2011-10-01

Despite barium being used as a contrast media for decades, the specific assessment of its safety in pregnant women is scarce. We are reporting the favourable pregnancy outcome in women who were inadvertently exposed to barium swallow and associated ionising radiation, early in pregnancy. A control group of age- and gravidity-matched unexposed pregnant women was also included. There were 32 live-born babies in the exposed group and 94 in the control group. Women had undergone diagnostic upper gastrointestinal tract (UGT) fluoroscopic examination at 3.3 ± 1.5 weeks' gestation. Estimated maternal radiation dose secondary to barium swallow varied widely, the maximum dose was estimated to be 2.45 mSv. Similar pregnancy outcomes were observed between the groups. The number of babies born with major malformations was not significantly different (p = 1.0) between cases and controls: one (3.1%) vs three (3.2%), respectively. In conclusion, our small prospective cohort study of women suggests no association between inadvertent exposure to ionising radiation and barium sulphate during fluoroscopic barium swallow and adverse fetal outcomes.

The Effects of Giving and Receiving Marginal L1 Glosses on L2 Vocabulary Learning by Upper Secondary Learners

Science.gov (United States)

Samian, Hosein Vafadar; Foo, Thomas Chow Voon; Mohebbi, Hassan

2016-01-01

This paper reports the findings of a study that investigated the effect of giving and receiving marginal L1 glosses on L2 vocabulary learning. To that end, forty nine Iranian learners of English were assigned to three different experimental conditions including marginal L1 glosses Giver (n = 17), marginal L1 glosses Receiver (n = 17), and no…

The social image of drinking - mass media campaigns may inadvertently increase binge drinking.

Science.gov (United States)

Zimmermann, Friederike; Kohlmann, Karoline; Monter, Anne; Ameis, Nina

2017-10-01

Mass media campaigns that promote responsible drinking are rarely tested for their usefulness in reducing heavy alcohol consumption. Existing campaigns that appeal to responsible drinking while simultaneously displaying young people in social drinking situations may even have paradoxical effects. To examine such possible effects, we drew on a real-world media campaign, which we systematically modified on the basis of recent prototype research. We pilot tested questionnaires (using n = 41 participants), developed two different sets of posters in the style of an existing campaign (n = 39) and investigated their effectiveness (n = 102). In the main study, young men were randomly assigned to one of three conditions: sociable or unsociable binge drinker prototype condition or a control group. Outcome variables were intention, behavioural willingness, attitude, subjective norm, self-efficacy, prototype evaluation and prototype similarity with respect to binge drinking. Binge drinking as a habit was included to control for the fact that habitual drinking in social situations is hard to overcome and poses a particular challenge to interventions. The manipulation check showed that the experimental variation (sociable vs. unsociable drinker prototype condition) was successful. Results of the main study showed that the sociable drinker prototype condition resulted in a higher willingness and - for those with less of a habit - a higher intention to binge drink the next weekend. The unsociable drinker prototype condition had no effects. The results imply that the social components of mass media campaigns might inadvertently exacerbate binge drinking in young men. We therefore advocate against campaigns including aspects of alcohol consumption that might be positively associated with drinker prototype perception. Finally, we provide suggestions for future research.

Retail margins and the effects of an integrated Nordic end user market for electricity

Energy Technology Data Exchange (ETDEWEB)

Damsgaard, Niclas; Roempoetti, Marie

2007-09-15

There is an ongoing discussion about the need for further and deeper integration of the Nordic electricity market. Following the Nordic Council of Minister's summit in Akureyri in 2004 this work has been intensified. NordREG and Nordel have produced several studies on the integration of the market. Work is currently being done on a Nordic common market platform for balancing services and a Nordic balancing agreement, the market design for a common market and a common model for supply switches and several other issues. This study should be seen in relationship with these other studies and we have deliberately aimed at avoiding overlaps. An integrated Nordic retail market for electricity would in principle imply a common market for 14 million customers served by several hundred retail companies. The question asked in this study is what are the benefits for the customers of such a development? In order to create a common Nordic market there are several barriers that needs to be overcome. There are technical barriers such as differences in IT-systems, regulatory barriers caused by differences in e.g. the responsibilities and the regulation of the DSOs and finally of course business barriers that exists for all cross-border businesses. A well-functioning Nordic retail market would lead to price equalisation - at least if the costs are equal. This would mean that particularly customers in areas with high retail margins could benefit from a joint Nordic market. Furthermore, dilution of market power could lead to more intense competition which in turn both could lead to lower costs and lower margins. In this report we focus on the possible direct effects on prices. In addition to this it is likely that there are efficiency gains, for instance through decreased costs in developing IT-systems etc. for a larger market which would decrease costs both for the suppliers and for DSOs. There might also be other economies-of-scales arising from a larger market. The possible

Informing practice regarding marginalization: the application of the Koci Marginality Index.

Science.gov (United States)

Koci, Anne Floyd; McFarlane, Judith; Nava, Angeles; Gilroy, Heidi; Maddoux, John

2012-12-01

The 49th World Health Assembly of the World Health Organization (WHO) declared violence as the leading worldwide public health problem with a focus on the increase in the incidence of injuries to women. Violence against women is an international epidemic with specific instruments required to measure the impact on women's functioning. This article describes the application of the Koci Marginality Index (KMI), a 5-item scale to measure marginality, to the baseline data of a seven-year prospective study of 300 abused women: 150 first time users of a shelter and 150 first time applicants for a protection order from the justice system. Validity and reliability of the Koci Marginality Index and its usefulness for best clinical practice and for policy decisions for abused women's health are discussed. The 49th World Health Assembly of the World Health Organization (WHO) declared violence as the leading worldwide public health problem and focused on the increase in the incidence of injuries to women (Krug et al., 2002 ). Violence against women in the form of intimate partner violence (IPV) is costly in terms of dollars and health. In the United States in 2003, estimated costs of IPV approached $8.3 billion (Centers for Disease Control and Prevention [CDC], 2011). Outcomes related to severity of IPV vary but in 2003 victims suffering severe IPV lost nearly 8 million days of paid work, and greater than 5 million days of household productivity annually (CDC, 2011). Besides the evident financial cost of IPV, research confirms that exposure to IPV impacts a woman's health immediately and in the long-term (Breiding, Black, & Ryan, 2008 ; Campbell, 2002 ; CDC, 2011). Such sequela adversely affect the health of women and may increase their marginalization, a concept akin to isolation that may further increase negative effects on health outcomes. Immigrant women are at high risk for IPV (Erez, 2002 ) and those without documentation are at higher risk for marginalization (Montalvo

Effect of tightening torque on the marginal adaptation of cement-retained implant-supported fixed dental prostheses.

Science.gov (United States)

Ghanbarzadeh, Jalil; Dashti, Hossin; Karamad, Reza; Alikhasi, Marzieh; Nakhaei, Mohammadreza

2015-01-01

The final position of the abutment changes with the amount of tightening torque. This could eventually lead to loss of passivity and marginal misfit of prostheses. The aim of this study was to evaluate the effect of three different tightening torques on the marginal adaptation of 3-unit cement-retained implant-supported fixed dental prostheses (FDPs). Two implants (Straumann) were inserted in an acrylic block so that one of the implants was placed vertically and the other at a 15° vertical angle. A straight abutment and a 15° angulated abutment were connected to the vertically and obliquely installed implants, respectively, so that the two abutments were parallel. Then, 10 cement-retained FDPs were waxed and cast. Abutments were tightened with 10, 20, and 35 Ncm torques, respectively. Following each tightening torque, FDPs were luted on respective abutments with temporary cement. The marginal adaptation of the retainers was evaluated using stereomicroscope. FDPs were then removed from the abutments and were sectioned at the connector sites. The retainers were luted again on their respective abutments. Luting procedures and marginal adaptation measurement were repeated. Data were analyzed by ANOVA and least significant difference tests (α = 0.05). After cutting the FDP connectors, the independent samples t-test was used to compare misfit values (α = 0.05). Following 10, 20, and 35 Ncm tightening torques, the marginal discrepancy of the retainers of FDPs significantly increased (P marginal discrepancies of these two retainers (P > 0.05). The marginal gap values of angulated abutment retainers (ANRs) were significantly higher than those of the straight abutment after cutting the connectors (P = 0.026). Within the limitations of this study, the marginal misfit of cement-retained FDPs increased continuously when the tightening torque increased. After cutting the connectors, the marginal misfit of the ANRs was higher than those of the straight abutment retainers.

Inadvertent Apical Extrusion of Sodium Hypochlorite with Evaluation by Dental Volumetric Tomography

Directory of Open Access Journals (Sweden)

Elif Delve Başer Can

2015-01-01

Full Text Available This case report describes the tissue injury caused by inadvertently extruded NaOCl through the apical constriction. A 56-year-old female patient with complaints of pain, swelling, and ecchymosis on the left side of her face was referred to our clinic. The symptoms had emerged following root canal treatment of the maxillary left first premolar, and a soft tissue complication due to apical extrusion of NaOCl was diagnosed. Antibiotics and analgesics were prescribed. DVT images revealed that the buccal root apex had perforated the maxillary bone. The patient was followed up every other day and became asymptomatic on the 10th day. Endodontic therapy was completed with routine procedures. Determining working length precisely and following irrigation protocols meticulously are indispensable to prevent this type of complication. 3D visualization of the affected area may reveal the cause of the incident.

Effect of repeated ceramic firings on the marginal and internal adaptation of metal-ceramic restorations fabricated with different CAD-CAM technologies.

Science.gov (United States)

Kocaağaoğlu, Hasan; Albayrak, Haydar; Kilinc, Halil Ibrahim; Gümüs, Hasan Önder

2017-11-01

The use of computer-aided design and computer-aided manufacturing (CAD-CAM) for metal-ceramic restorations has increased with advances in the technology. However, little is known about the marginal and internal adaptation of restorations fabricated using laser sintering (LS) and soft milling (SM). Moreover, the effects of repeated ceramic firings on the marginal and internal adaptation of metal-ceramic restorations fabricated with LS and SM is also unknown. The purpose of this in vitro study was to investigate the effects of repeated ceramic firings on the marginal and internal adaptation of metal-ceramic copings fabricated using the lost wax (LW), LS, and SM techniques. Ten LW, 10 LS, and 10 SM cobalt-chromium (Co-Cr) copings were fabricated for an artificial tooth (Frasaco GmbH). After the application of veneering ceramic (VITA VMK Master; VITA Zahnfabrik), the marginal and internal discrepancies of these copings were measured with a silicone indicator paste and a stereomicroscope at ×100 magnification after the first, second, and third clinical simulated ceramic firing cycles. Repeated measures 2-way ANOVA and the Fisher LSD post hoc test were used to evaluate differences in marginal and internal discrepancies (α=.05). Neither fabrication protocol nor repeated ceramic firings had any statistically significant effect on internal discrepancy values (P>.05). Marginal discrepancy values were also statistically unaffected by repeated ceramic firings (P>.05); however, the fabrication protocol had a significant effect on marginal discrepancy values (Pmarginal discrepancy values than LS or SM (PMarginal discrepancy values did not vary between LS and SM (P>.05). All groups demonstrated clinically acceptable marginal adaptation after repeated ceramic firing cycles; however, the LS and SM groups demonstrated better marginal adaptation than that of LW group and may be appropriate clinical alternatives to LW. Copyright © 2017 Editorial Council for the Journal of

Biodiversity and agro-ecology in field margins.

Science.gov (United States)

De Cauwer, B; Reheul, D; Nijs, I; Milbau, A

2005-01-01

This multidisciplinary study investigates agro-ecological functions (nature conservation, agriculture, environment) and implications of newly created, mown sown and unsown field margin strips installed on ex-arable land to increase biodiversity. From conservational concern, the development of species rich field margin strips was not strongly affected by the installed type of margin strip since species diversity converged over time, whether strips were sown or not. Convergence between unsown and sown margin strips occurred also in terms of species composition: unsown and sown strips became similar over time. Mowing without removal of cuttings significantly reduced species richness, yielded more grassy margin strips and delayed similarity in species composition between sown and unsown margin strips. Species richness on the longer term was not significantly affected by light regime nor by disturbance despite significant temporary effects shortly after the disturbance event. On the contrary vegetation composition in terms of importance of functional groups changed after disturbance: the share of spontaneous species within functional groups increased resulting in higher similarity between the sown and unsown vegetation. Furthermore risk of invasion was highest in the disturbed unsown community on the unshaded side of a tree lane. A positive effect of botanical diversity on insect number and diversity was found. However the effects of botanical diversity on insect number was mediated by light regime. At high light availability differences between plant communities were more pronounced compared to low light availablilty. The abundance of some insect families was dependent on the vegetation composition. Furthermore light availability significantly influenced insect diversity as well as the spatial distribution of families. From agricultural concern, installing margin strips by sowing a species mixture and a mowing regime with removal of cuttings are good practices to

Treatment Approach to Small Inadvertent Injury of the Crystalline Lens Anterior Capsule During Iridodialysis Repair Surgery

Directory of Open Access Journals (Sweden)

Gökçen Gökçe

2013-01-01

Full Text Available A 22-year-old man presented to our ophthalmology department with photophobia. On ophthalmic examination, iridodialysis secondary to blunt trauma that occurred 5 years ago was diagnosed. During iridodialysis repair surgery, long curved double-armed needle of 10-0 polypropylene suture (PC-9 inserted into the 19 gauge side port turned down inadvertently by its own weight, resulting in crystalline lens anterior capsule perforation. Postoperative clinical observation revealed no lens opacification affecting visual acuity. This case report showed that lens aspiration surgery should be postponed if the capsule injury is small.(Turk J Ophthalmol 2013; 43: 61-3

LWRA analysis of inadvertent closing of the main steam isolation valve in NPP Krsko

International Nuclear Information System (INIS)

Feretic, D.; Cavlina, N.; Grgic, D.; Spalj, S.

1996-01-01

The paper describes the use of system code RELAP5/mod2 and analyzer code LWRA in analysis of inadvertent closing of the main steam isolation valve that happened in NPP Krsko on September, 25 1995. Three cases were calculated in order to address different aspects of the modelled transient. This preliminary calculation showed that, even though the real plant behaviour was not completely reproduced, such kind of analysis can help to better understand plant behaviour and to identify important phenomena in the plant during transient. The results calculated by RELAP5 and LWRA were similar and both codes indicated lack of better understanding of the plant systems status. The LWRA was more than 5 times faster than real time. (author)

Matthew and marginality

Directory of Open Access Journals (Sweden)

Denis C. Duling

1995-12-01

Full Text Available This article explores marginality theory as it was first proposed in  the social sciences, that is related to persons caught between two competing cultures (Park; Stonequist, and, then, as it was developed in sociology as related to the poor (Germani and in anthropology as it was related to involuntary marginality and voluntary marginality (Victor Turner. It then examines a (normative scheme' in antiquity that creates involuntary marginality at the macrosocial level, namely, Lenski's social stratification model in an agrarian society, and indicates how Matthean language might fit with a sample inventory  of socioreligious roles. Next, it examines some (normative schemes' in  antiquity for voluntary margi-nality at the microsocial level, namely, groups, and examines how the Matthean gospel would fit based on indications of factions and leaders. The article ,shows that the author of the Gospel of Matthew has an ideology of (voluntary marginality', but his gospel includes some hope for (involuntary  marginals' in  the  real world, though it is somewhat tempered. It also suggests that the writer of the Gospel is a (marginal man', especially in the sense defined by the early theorists (Park; Stone-quist.

Inadvertent recovery in communication deficits following the upper limb mirror therapy in stroke: A case report.

Science.gov (United States)

Arya, Kamal Narayan; Pandian, Shanta

2014-10-01

Broca's aphasia is the most challenging communication deficit in stroke. Left inferior frontal gyrus (IFG), a key region of the mirror-neuron system, gets lesioned in Broca's aphasia. Mirror therapy (MT), a form of action-observation, may trigger the mirror neurons. The aim of this study was to report a case of poststroke subject with Broca's aphasia, who exhibited an inadvertent and significant improvement in speech after MT for the paretic upper limb. The 20-month old stroke patient underwent MT through goal-directed tasks. He received a total absence of spontaneous speech, writing, and naming. After 45 sessions of task-based MT for the upper limb, he showed tremendous recovery in expressive communication. He had fluent and comprehensive communication; however, with a low pitch and minor pronunciation errors. He showed a substantial change (from 18/100 to 79/100) on the Communicative Effective Index, particularly, on items such as expressing emotions, one-to-one conversation, naming, and spontaneous conversation. Copyright © 2014 Elsevier Ltd. All rights reserved.

The effects of photodynamic laser therapy in the treatment of marginal chronic periodontitis

Science.gov (United States)

Chifor, Radu; Badea, Iulia; Avram, Ramona; Chifor, Ioana; Badea, Mîndra Eugenia

2016-03-01

The aim of this study was to assess the effects of the antimicrobial photodynamic laser therapy performed during the treatment of deep periodontal disease by using 40 MHz high frequency ultrasonography. The periodontal data recorded during the clinical examination before each treatment session were compared with volumetric changes of the gingiva measured on periodontal ultrasound images. The results show a significant decrease of gingival tissue inflammation proved both by a significant decrease of bleeding on probing as well as by a decrease of the gingival tissues volume on sites where the laser therapy was performed. Periodontal tissues that benefit of laser therapy besides classical non-surgical treatment showed a significant clinical improvement of periodontal status. Based on these findings we were able to conclude that the antimicrobial photodynamic laser therapy applied on marginal periodontium has important anti-inflamatory effect. The periodontal ultrasonography is a method which can provide useful data for assessing the volume changes of gingival tissues, allowing a precise monitoring of marginal periodontitis.

[An experimental study on the effect of different optical impression methods on marginal and internal fit of all-ceramic crowns].

Science.gov (United States)

Tan, Fa-Bing; Wang, Lu; Fu, Gang; Wu, Shu-Hong; Jin, Ping

2010-02-01

To study the effect of different optical impression methods in Cerec 3D/Inlab MC XL system on marginal and internal fit of all-ceramic crowns. A right mandibular first molar in the standard model was used to prepare full crown and replicated into thirty-two plaster casts. Sixteen of them were selected randomly for bonding crown and the others were used for taking optical impression, in half of which the direct optical impression taking method were used and the others were used for the indirect method, and then eight Cerec Blocs all-ceramic crowns were manufactured respectively. The fit of all-ceramic crowns were evaluated by modified United States Public Health Service (USPHS) criteria and scanning electron microscope (SEM) imaging, and the data were statistically analyzed with SAS 9.1 software. The clinically acceptable rate for all marginal measurement sites was 87.5% according to USPHS criteria. There was no statistically significant difference in marginal fit between direct and indirect method group (P > 0.05). With SEM imaging, all marginal measurement sites were less than 120 microm and no statistically significant difference was found between direct and indirect method group in terms of marginal or internal fit (P > 0.05). But the direct method group showed better fit than indirect method group in terms of mesial surface, lingual surface, buccal surface and occlusal surface (P impression method had no significant effect on marginal fit of Cerec Blocs crowns, but it had certain effect on internal fit. Overall all-ceramic crowns appeared to have clinically acceptable marginal fit.

Investigations on the inadvertent power increase in a PHWR as ASSET experience

Energy Technology Data Exchange (ETDEWEB)

Kumar, S H [Operating Plants Safety Div., Atomic Energy Regulatory Board, Mumbai (India)

1997-12-31

Investigations were carried out using the ASSET methodology to find out the root cause of an incident involving inadvertent increase in reactor power in the Unit 1 of Narora Atomic Power Station (NAPS) in India. NAPS is a twin Unit, 220 MWe PHWR based power station. On December 4, 1992, when NPAS Unit 1 was operating at 130 MWe, the reactor power increased steadily on its own and touched 147 MWe, over a period of 14 minutes. The set (demand) power of the triplicated reactor regulating system had increased on its own and in turn has made the reactor to operated at higher power. The power was brought down to 120 MWe by manual intervention. Since adequate system related data during the incident was not available, laboratory studies were carried out using computer simulations for the various process disturbances which could affect the reactor regulating system, for establishing the causes of the event. 4 figs.

Investigations on the inadvertent power increase in a PHWR as ASSET experience

International Nuclear Information System (INIS)

Kumar, S.H.

1996-01-01

Investigations were carried out using the ASSET methodology to find out the root cause of an incident involving inadvertent increase in reactor power in the Unit 1 of Narora Atomic Power Station (NAPS) in India. NAPS is a twin Unit, 220 MWe PHWR based power station. On December 4, 1992, when NPAS Unit 1 was operating at 130 MWe, the reactor power increased steadily on its own and touched 147 MWe, over a period of 14 minutes. The set (demand) power of the triplicated reactor regulating system had increased on its own and in turn has made the reactor to operated at higher power. The power was brought down to 120 MWe by manual intervention. Since adequate system related data during the incident was not available, laboratory studies were carried out using computer simulations for the various process disturbances which could affect the reactor regulating system, for establishing the causes of the event. 4 figs

Enhancing the diversity of breeding invertebrates within field margins of intensively managed grassland: Effects of alternative management practices.

Science.gov (United States)

Fritch, Rochelle A; Sheridan, Helen; Finn, John A; McCormack, Stephen; Ó hUallacháin, Daire

2017-11-01

Severe declines in biodiversity have been well documented for many taxonomic groups due to intensification of agricultural practices. Establishment and appropriate management of arable field margins can improve the diversity and abundance of invertebrate groups; however, there is much less research on field margins within grassland systems. Three grassland field margin treatments (fencing off the existing vegetation "fenced"; fencing with rotavation and natural regeneration "rotavated" and; fencing with rotavation and seeding "seeded") were compared to a grazed control in the adjacent intensively managed pasture. Invertebrates were sampled using emergence traps to investigate species breeding and overwintering within the margins. Using a manipulation experiment, we tested whether the removal of grazing pressure and nutrient inputs would increase the abundance and richness of breeding invertebrates within grassland field margins. We also tested whether field margin establishment treatments, with their different vegetation communities, would change the abundance and richness of breeding invertebrates in the field margins. Exclusion of grazing and nutrient inputs led to increased abundance and richness in nearly all invertebrate groups that we sampled. However, there were more complex effects of field margin establishment treatment on the abundance and richness of invertebrate taxa. Each of the three establishment treatments supported a distinct invertebrate community. The removal of grazing from grassland field margins provided a greater range of overwintering/breeding habitat for invertebrates. We demonstrate the capacity of field margin establishment to increase the abundance and richness in nearly all invertebrate groups in study plots that were located on previously more depauperate areas of intensively managed grassland. These results from grassland field margins provide evidence to support practical actions that can inform Greening (Pillar 1) and agri

Parotid gland sparing effect by computed tomography-based modified lower field margin in whole brain radiotherapy

International Nuclear Information System (INIS)

Cho, Oyeon; Chun, Mi Son; Oh, Young Taek; Kim, Mi Hwa; Park, Hae Jin; Nam, Sang Soo; Heo, Jae Sung; Noh, O Kyu; Park, Sung Ho

2013-01-01

Parotid gland can be considered as a risk organ in whole brain radiotherapy (WBRT). The purpose of this study is to evaluate the parotid gland sparing effect of computed tomography (CT)-based WBRT compared to 2-dimensional plan with conventional field margin. From January 2008 to April 2011, 53 patients underwent WBRT using CT-based simulation. Bilateral two-field arrangement was used and the prescribed dose was 30 Gy in 10 fractions. We compared the parotid dose between 2 radiotherapy plans using different lower field margins: conventional field to the lower level of the atlas (CF) and modified field fitted to the brain tissue (MF). Averages of mean parotid dose of the 2 protocols with CF and MF were 17.4 Gy and 8.7 Gy, respectively (p 98% of prescribed dose were 99.7% for CF and 99.5% for MF. Compared to WBRT with CF, CT-based lower field margin modification is a simple and effective technique for sparing the parotid gland, while providing similar dose coverage of the whole brain.

Analysis of inadvertent safety injection incident at Kori unit 3 on september 6, 1990

International Nuclear Information System (INIS)

Kim, Kyun Tae; Chung, Bub Dong; Kim, In Goo; Kim, Hho Jung

1992-01-01

The inadvertent safety injection incident occurred at Kori Unit 3 on September 6, 1990 is analyzed using RELAP5/MOD3 code. The event was initiated by a failure of main feedwater control valve in one of three steam generators. The actual sequence of plant transient with the proper estimations of the operator actions is investigated in the present calculation. The calculational results are compared with the plant transient data. It is shown that the results of the plant behaviors are in good agreement with the plant data. The emergency response guidelines is assessed for the time of the SI termination and the establishment of natural circulation. The changes in the time of the SI termination do not significantly affect the overall plant behaviors, and the natural circulation is established

A marginal structural model to estimate the causal effect of antidepressant medication treatment on viral suppression among homeless and marginally housed persons with HIV.

Science.gov (United States)

Tsai, Alexander C; Weiser, Sheri D; Petersen, Maya L; Ragland, Kathleen; Kushel, Margot B; Bangsberg, David R

2010-12-01

Depression strongly predicts nonadherence to human immunodeficiency virus (HIV) antiretroviral therapy, and adherence is essential to maintaining viral suppression. This suggests that pharmacologic treatment of depression may improve virologic outcomes. However, previous longitudinal observational analyses have inadequately adjusted for time-varying confounding by depression severity, which could yield biased estimates of treatment effect. Application of marginal structural modeling to longitudinal observation data can, under certain assumptions, approximate the findings of a randomized controlled trial. To determine whether antidepressant medication treatment increases the probability of HIV viral suppression. Community-based prospective cohort study with assessments conducted every 3 months. Community-based research field site in San Francisco, California. One hundred fifty-eight homeless and marginally housed persons with HIV who met baseline immunologic (CD4+ T-lymphocyte count, 13) inclusion criteria, observed from April 2002 through August 2007. Probability of achieving viral suppression to less than 50 copies/mL. Secondary outcomes of interest were probability of being on an antiretroviral therapy regimen, 7-day self-reported percentage adherence to antiretroviral therapy, and probability of reporting complete (100%) adherence. Marginal structural models estimated a 2.03 greater odds of achieving viral suppression (95% confidence interval [CI], 1.15-3.58; P = .02) resulting from antidepressant medication treatment. In addition, antidepressant medication use increased the probability of antiretroviral uptake (weighted odds ratio, 3.87; 95% CI, 1.98-7.58; P effect is likely attributable to improved adherence to a continuum of HIV care, including increased uptake and adherence to antiretroviral therapy.

The Effectiveness of Competition Policy and the Price-Cost Margin: Evidence from Panel Data

OpenAIRE

Patrick McCloughan; Seán Lyons; William Batt

2007-01-01

This paper presents robust panel data econometric evidence suggesting that more effective competition policy curtails the exercise of market power because countries in which competition policy is judged to be more effective are characterised by lower market price-cost margins, controlling for other factors, including market growth, import penetration and spare capacity. The measure of competition policy effectiveness incorporated into our analysis is the annual survey-based ratings of nationa...

The availability of soil-associated radionuclides for uptake after inadvertent ingestion by humans

International Nuclear Information System (INIS)

Shaw, S.; Green, N.

2002-01-01

Assessments of the radiological impact of radionuclides released into the environment generally take into account the inadvertent ingestion of radionuclides associated with soil or sediment. Such assessments often assume that gut uptake factors for radionuclides that are biologically incorporated in food are also applicable when the ingested activity is associated with soil. Studies of the availability of soil-associated radionuclides after ingestion have been mainly conducted on ruminant animals and few data exist for humans. The digestive tract of ruminants is totally different from that of a mono-gastric animal and so the availability estimated from the animal studies may not be valid in the case of man. A simple in-vitro enzymolysis procedure was therefore developed to simulate human digestion closely. The measured availability of 137 Cs, 241 Am, 239 PU and 90 Sr associated with loam, sand and peat soils was about 3%, 3%, 10% and 50% respectively. (author)

The stability margin on EAST tokamak

International Nuclear Information System (INIS)

Jin-Ping, Qian; Bao-Nian, Wan; Biao, Shen; Bing-Jia, Xiao; Walker, M.L.; Humphreys, D.A.

2009-01-01

The experimental advanced superconducting tokamak (EAST) is the first full superconducting tokamak with a D-shaped cross-sectional plasma presently in operation. Its poloidal coils are relatively far from the plasma due to the necessary thermal isolation from the superconducting magnets, which leads to relatively weaker coupling between plasma and poloidal field. This may cause more difficulties in controlling the vertical instability by using the poloidal coils. The measured growth rates of vertical stability are compared with theoretical calculations, based on a rigid plasma model. Poloidal beta and internal inductance are varied to investigate their effects on the stability margin by changing the values of parameters α n and γ n (Howl et al 1992 Phys. Fluids B 4 1724), with plasma shape fixed to be a configuration with k = 1.9 and δ = 0.5. A number of ways of studying the stability margin are investigated. Among them, changing the values of parameters κ and l i is shown to be the most effective way to increase the stability margin. Finally, a guideline of stability margin M s (κ, l i , A) to a new discharge scenario showing whether plasmas can be stabilized is also presented in this paper

Ferritin associates with marginal band microtubules

International Nuclear Information System (INIS)

Infante, Anthony A.; Infante, Dzintra; Chan, M.-C.; How, P.-C.; Kutschera, Waltraud; Linhartova, Irena; Muellner, Ernst W.; Wiche, Gerhard; Propst, Friedrich

2007-01-01

We characterized chicken erythrocyte and human platelet ferritin by biochemical studies and immunofluorescence. Erythrocyte ferritin was found to be a homopolymer of H-ferritin subunits, resistant to proteinase K digestion, heat stable, and contained iron. In mature chicken erythrocytes and human platelets, ferritin was localized at the marginal band, a ring-shaped peripheral microtubule bundle, and displayed properties of bona fide microtubule-associated proteins such as tau. Red blood cell ferritin association with the marginal band was confirmed by temperature-induced disassembly-reassembly of microtubules. During erythrocyte differentiation, ferritin co-localized with coalescing microtubules during marginal band formation. In addition, ferritin was found in the nuclei of mature erythrocytes, but was not detectable in those of bone marrow erythrocyte precursors. These results suggest that ferritin has a function in marginal band formation and possibly in protection of the marginal band from damaging effects of reactive oxygen species by sequestering iron in the mature erythrocyte. Moreover, our data suggest that ferritin and syncolin, a previously identified erythrocyte microtubule-associated protein, are identical. Nuclear ferritin might contribute to transcriptional silencing or, alternatively, constitute a ferritin reservoir

Mental Depreciation and Marginal Decision Making

Science.gov (United States)

Heath; Fennema

1996-11-01

We propose that individuals practice "mental depreciation," that is, they implicitly spread the fixed costs of their expenses over time or use. Two studies explore how people spread fixed costs on durable goods. A third study shows that depreciation can lead to two distinct errors in marginal decisions: First, people sometimes invest too much effort to get their money's worth from an expense (e.g., they may use a product a lot to spread the fixed expense across more uses). Second, people sometimes invest too little effort to get their money's worth: When people add a portion of the fixed cost to the current costs, their perceived marginal (i.e., incremental) costs exceed their true marginal costs. In response, they may stop investing because their perceived costs surpass the marginal benefits they are receiving. The latter effect is supported by two field studies that explore real board plan decisions by university students.

[Study on the effect of different impression methods on the marginal fit of all-ceramic crowns].

Science.gov (United States)

Zhan, Lilin; Zeng, Liwei; Chen, Ping; Liao, Lan; Li, Shiyue; Liu, Renying

2015-08-01

To investigate the effect of three different impression methods on the marginal fit of all-ceramic crowns. The three methods include scanning silicone rubber impression, cast models, and direct optical impression. The polymethyl methacrylate (PMMA) material of a mandibular first molar in standard model was prepared with 16 models duplicated. The all-ceramic crowns were prepared using three different impression methods. Accurate impressions were made using silicone rubber, and the cast models were obtained. The PMMA models, silicone rubber impressions, and cast models were scanned, and digital models of three groups were obtained to produce 48 zirconia all-ceramic crowns with computer aided design/computer aided manufacture. The marginal fit of these groups was measured by silicone rubber gap impression. Statistical analysis was performed with SPSS 17.0 software. The marginal fit of direct optical impression groups, silicone rubber impression groups, cast model groups was (69.18±9.47), (81.04±10.88), (84.42±9.96) µm. A significant difference was observed in the marginal fit of the direct optical impression groups and the other groups (Pimpression groups and the cast model groups (P>0.05). All marginal measurement sites are clinically acceptable by the three different impression scanning methods. The silicone rubber impression scanning method can be used for all-ceramic restorations.

Effectiveness of an infiltrant on sealing of composite restoration margins with/without artificial caries.

Science.gov (United States)

Tulunoglu, Ozlem; Tulunoglu, Ibrahim Fevzi; Antonson, Sibel A; Campillo-Funollet, Marc; Antonson, Donald; Munoz-Viveros, Carlos

2014-11-01

The aim of this in vitro study was to evaluate the effectiveness of a resin infiltrant (ICON) on marginal sealing ability of class II resin restorations with/without-caries. Forty-eight noncarious human pre-molar teeth were embedded and MO and DO preparations of standard dimensions were prepared. The left side of dentin margins of the cavities were left nonbonded (UB) while the right side were bonded using total etch-bonding agent and all restored with a Nanohybrid composite. The teeth were thermocycled and half of the specimens in the UB and B groups were subjected to an artificial caries process. ICON was applied to caries and noncaries subgroups following the manufacturer's directions. Impressions were made at each step: after the restorations were completed, thermocycling, artificial caries procedures, and infiltrant application and the silicone tag lengths were measured with a stereomicroscope. The specimens were immersed in 0.5% basic fuchsine at 37° C for 24 hours, sectioned and microleakage was evaluated with a stereomicroscope. Selected samples and their replicas were assessed for marginal quality under a stereomicroscope and SEM. Statistical evaluation of the data were made using Kruskal-Wallis, Mann-Whitney U and Wilcoxon Sign Rank tests. While bonding application did not create a meaningful difference, the thermocycling and artificial caries significantly increased the gap length and microleakage (p < 0.05). ICON application was decreased the microleakage, created gap-free margins and closed the gaps which were previously occurred at the same cavities (p < 0.05). A resin infiltrant (ICON) application decreased the microleakage, created gap-free margins and closed the gaps, which previously occurred at the same cavities. Approximal application of resin infiltrant may increase the success of the class II composite restorations also reduced the risk of needing more complex restoration therapy.

Helping Students on the Margin Succeed in Schools.

Science.gov (United States)

Langenfeld, Michelle Schoen; Cumming, Brenda

1996-01-01

Addresses how Apple Valley High School (Minnesota) has been able to help marginal students succeed in school. The fundamental actions that contributed to the effectiveness of study-team efforts to help marginal students are discussed, and what has been learned through these efforts is considered. (GR)

Stroke: a Hidden Danger of Margin Trading in Stock Markets.

Science.gov (United States)

Lin, Shu-Hui; Wang, Chien-Ho; Liu, Tsai-Ching; Chen, Chin-Shyan

2015-10-01

Using 10-year population data from 2000 through 2009 in Taiwan, this is the first paper to analyze the relationship between margin trading in stock markets and stroke hospitalizations. The results show that 3 and 6 days after an increase of margin trading in the Taiwan stock markets are associated with greater stoke hospitalizations. In general, a 1 % increase in total margin trading positions is associated with an increment of 2.5 in the total number of stroke hospitalizations, where the mean number of hospital admissions is 233 cases a day. We further examine the effects of margin trading by gender and age groups and find that the effects of margin trading are significant for males and those who are 45-74 years old only. In summary, buying stocks with money you do not have is quite risky, especially if the prices of those stocks fall past a certain level or if there is a sudden and severe drop in the stock market. There is also a hidden danger to one's health from margin trading. A person should be cautious before conducting margin trading, because while it can be quite profitable, danger always lurks just around the corner.

Effect of fiber inserts on gingival margin microleakage of Class II bulk-fill composite resin restorations.

Science.gov (United States)

Shafiei, Fereshteh; Doozandeh, Maryam; Karimi, Vahid

2018-01-01

This study evaluated the effect of fiber inserts combined with composite resins on enamel and dentin margin microleakage. The fiber inserts were used with high- (x-tra fil) and low-viscosity (x-tra base) bulk-fill composite resins and as well as conventional composite resins (Grandio and Grandio Flow). In 96 sound, recently extracted molars, 2 standardized Class II cavities were prepared. The teeth were randomly divided into 8 groups of 12 teeth each, based on composite resin type and presence or absence of fiber inserts: groups 1 and 2, x-tra fil with and without fiber inserts, respectively; groups 3 and 4, x-tra base with and without fiber inserts; groups 5 and 6, Grandio with and without fiber inserts; and groups 7 and 8, Grandio Flow liner (gingival floor)/Grandio (remainder of cavity) with and without fiber inserts. In all the groups, a 2-step etch-and-rinse adhesive was used. The specimens were processed in a dye penetration technique to determine microleakage percentages. Data were analyzed with analysis of variance, Tukey, and t tests. There was significantly less leakage at the enamel margins than the dentin margins. Fiber reinforcement significantly decreased enamel microleakage in all the groups, with no significant differences among the groups. Concerning dentin microleakage, there were no significant differences among the 4 groups without fiber inserts, while a significant difference was detected in groups 2 (x-tra fil plus fiber) and 8 (Grandio Flow plus fiber/Grandio). Fibers significantly improved dentin sealing in groups 2 and 8. These findings suggest that a fiber insert reinforcing bulk-fill and conventional composite resins might improve enamel sealing in shallow Class II cavi-ties. The effect of fiber reinforcement on the dentin margins of deep cavities depended on the viscosity of the composite resins; fiber reinforcement was effective for flowable bulk-fill and conventional composite resin restorations.

Stepping in Place While Voluntarily Turning Around Produces a Long-Lasting Posteffect Consisting in Inadvertent Turning While Stepping Eyes Closed

Directory of Open Access Journals (Sweden)

Stefania Sozzi

2016-01-01

Full Text Available Training subjects to step in place on a rotating platform while maintaining a fixed body orientation in space produces a posteffect consisting in inadvertent turning around while stepping in place eyes closed (podokinetic after-rotation, PKAR. We tested the hypothesis that voluntary turning around while stepping in place also produces a posteffect similar to PKAR. Sixteen subjects performed 12 min of voluntary turning while stepping around their vertical axis eyes closed and 12 min of stepping in place eyes open on the center of a platform rotating at 60°/s (pretests. Then, subjects continued stepping in place eyes closed for at least 10 min (posteffect. We recorded the positions of markers fixed to head, shoulder, and feet. The posteffect of voluntary turning shared all features of PKAR. Time decay of angular velocity, stepping cadence, head acceleration, and ratio of angular velocity after to angular velocity before were similar between both protocols. Both postrotations took place inadvertently. The posteffects are possibly dependent on the repeated voluntary contraction of leg and foot intrarotating pelvic muscles that rotate the trunk over the stance foot, a synergy common to both protocols. We propose that stepping in place and voluntary turning can be a scheme ancillary to the rotating platform for training body segment coordination in patients with impairment of turning synergies of various origin.

Estimating the effect of childhood socioeconomic disadvantage on oral cancer in India using marginal structural models.

Science.gov (United States)

Krishna Rao, Sreevidya; Mejia, Gloria C; Roberts-Thomson, Kaye; Logan, Richard M; Kamath, Veena; Kulkarni, Muralidhar; Mittinty, Murthy N

2015-07-01

Early life socioeconomic disadvantage could affect adult health directly or indirectly. To the best of our knowledge, there are no studies of the direct effect of early life socioeconomic conditions on oral cancer occurrence in adult life. We conducted a multicenter, hospital-based, case-control study in India between 2011 and 2012 on 180 histopathologically confirmed incident oral and/or oropharyngeal cancer cases, aged 18 years or more, and 272 controls that included hospital visitors, who were not diagnosed with any cancer in the same hospitals. Life-course data were collected on socioeconomic conditions, risk factors, and parental behavior through interview employing a life grid. The early life socioeconomic conditions measure was determined by occupation of the head of household in childhood. Adult socioeconomic measures included participant's education and current occupation of the head of household. Marginal structural models with stabilized inverse probability weights were used to estimate the controlled direct effects of early life socioeconomic conditions on oral cancer. The total effect model showed that those in the low socioeconomic conditions in the early years of childhood had 60% (risk ratio [RR] = 1.6 [95% confidence interval {CI} = 1.4, 1.9]) increased risk of oral cancer. From the marginal structural models, the estimated risk for developing oral cancer among those in low early life socioeconomic conditions was 50% (RR = 1.5 [95% CI = 1.4, 1.5]), 20% (RR = 1.2 [95% CI = 0.9, 1.7]), and 90% (RR = 1.9 [95% CI = 1.7, 2.2]) greater than those in the high socioeconomic conditions when controlled for smoking, chewing, and alcohol, respectively. When all the three mediators were controlled in a marginal structural model, the RR was 1.3 (95% CI = 1.0, 1.6). Early life low socioeconomic condition had a controlled direct effect on oral cancer when smoking, chewing tobacco, and alcohol were separately adjusted in marginal structural models.

Method and apparatus for preventing inadvertent criticality in a nuclear fueled electric power generating unit

International Nuclear Information System (INIS)

Tuley, C.R.; Bauman, D.A.; Neuner, J.A.; Feilchenfeld, M.M.; Greenberg, L.

1984-01-01

An inadvertent approach to criticality in a nuclear fueled electric power generating unit is detected and an alarm is generated through on-line monitoring of the neutron flux. The difficulties of accurately measuring the low levels of neutron flux in a subcritical reactor are overcome by the use of a microcomputer which continuously generates average flux count rate signals for incremental time periods from thousands of samples taken during each such period and which serially stores the average flux count rate signals for a preselected time interval. At the end of each incremental time period, the microcomputer compares the latest average flux count rate signal with the oldest, and preferably each of the intervening stored values, and if it exceeds any of them by at least a preselected multiplication factor, an alarm is generated. (author)

Marginalism, quasi-marginalism and critical phenomena in micellar solutions

International Nuclear Information System (INIS)

Reatto, L.

1986-01-01

The observed nonuniversal critical behaviour of some micellar solutions is interpreted in terms of quasi-marginalism, i.e. the presence of a coupling which scales with an exponent very close to the spatial dimensionality. This can give rise to a preasymptotic region with varying effective critical exponents with a final crossover to the Ising ones. The reduced crossover temperature is estimated to be below 10 -6 . The exponents β and γ measured in C 12 e 5 are in good agreement with the scaling law expected to hold for the effective exponents. The model considered by Shnidman is found unable to explain the nonuniversal critical behaviour

Marginal Pricing and Student Investment in Higher Education

Science.gov (United States)

Hemelt, Steven W.; Stange, Kevin M.

2016-01-01

This paper examines the effect of marginal price on students' educational investments using rich administrative data on students at Michigan public universities. Marginal price refers to the amount colleges charge for each additional credit taken in a semester. Institutions differ in how they price credits above the full-time minimum (of 12…

The Effect of Water or Wax-based Binders on the Chemical and Morphological Characteristics of the Margin Ceramic-Framework Interface.

Science.gov (United States)

Güler, Umut; de Queiroz, José Renato Cavalcanti; de Oliveira, Luiz Fernando Cappa; Canay, Senay; Ozcan, Mutlu

2015-09-01

This study evaluated the effect of binder choice in mixing ceramic powder on the chemical and morphological features between the margin ceramic-framework interfaces. Titanium and zirconia frameworks (15 x 5 x 0.5 mm3) were veneered with margin ceramics prepared with two different binders, namely a) water/conventional or b) wax-based. For each zirconia framework material, four different margin ceramics were used: a- Creation Zi (Creation Willi Geller International); b- GC Initial Zr (GC America); Triceram (Dentaurum); and d- IPS emax (voclar Vivadent). For the titanium framework, three different margin ceramics were used: a- Creation Ti (Creation Willi Geller International); b- Triceram (Dentaurum); and c- VITA Titaniumkeramik (Vita Zahnfabrik). The chemical composition of the framework-margin ceramic interface was analyzed using Energy Dispersive X-ray Spectroscopy (EDS) and porosity level was quantified within the margin ceramic using an image program (ImageJ) from four random areas (100 x 100 pixels) on each SEM image. EDS analysis showed the presence of Carbon at the margin ceramic-framework interface in the groups where wax-based binder technique was used with the concentration being the highest for the IPS emax ZirCAD group. While IPS system (IPS ZirCAD and IPS Emax) presented higher porosity concentration using wax binder, in the other groups wax-based binder reduced the porosity of margin ceramic, except for Titanium - Triceram combination.

"We call ourselves marginalized"

DEFF Research Database (Denmark)

Jørgensen, Nanna Jordt

2014-01-01

of the people we refer to as marginalized. In this paper, I discuss how young secondary school graduates from a pastoralist community in Kenya use and negotiate indigeneity, marginal identity, and experiences of marginalization in social navigations aimed at broadening their current and future opportunities. I...

The Role of Field Margins in Agro-biodiversity Management at the Farm Level

Directory of Open Access Journals (Sweden)

Giulio Lazzerini

2007-06-01

Full Text Available The agroecosystem could be considered as a mosaic so large to involve fields with annual and perennial crops, pastures, spots of wildwood, semi-natural habitats, vegetation in the edges of fields. In the agroecosystem these ecological infrastructures have a positive effects on the crops because of the exchange among community of organisms, materials and energy. The aim of this research is to evaluate the effects of field margins on some biodiversity components (plant species and carabid beetles of four farms located in Val d’Orcia (Tuscany. We compared three types of field margins: 1. Cultivated margin strips; 2. Sown grass margin strips; 3. Wild margin strips with hedgerow. In a very simplified typology of farming system, like the one studied (Val d’Orcia, the presence of field margins (hedges, margin strips and semi-natural habitats associated with the boundary is very important for its ecological effects: it improves the planned biodiversity, gives habitat, refuge, food and corridors for the movement to the different species of organisms in the area. Applying the multivariate analysis to the experimental data, we can notice a positive effect of the presence of field margins on the trend of both components of biodiversity. This positive effect, which support the mechanisms of autoregulation of the agroecosystems, is very important especially for organic and biodynamic agriculture, where the use of pesticides is not allowed.

Effective elastic thickness along the conjugate passive margins of India, Madagascar and Antarctica: A re-evaluation using the Hermite multitaper Bouguer coherence application

Science.gov (United States)

Ratheesh-Kumar, R. T.; Xiao, Wenjiao

2018-05-01

Gondwana correlation studies had rationally positioned the western continental margin of India (WCMI) against the eastern continental margin of Madagascar (ECMM), and the eastern continental margin of India (ECMI) against the eastern Antarctica continental margin (EACM). This contribution computes the effective elastic thickness (Te) of the lithospheres of these once-conjugated continental margins using the multitaper Bouguer coherence method. The results reveal significantly low strength values (Te ∼ 2 km) in the central segment of the WCMI that correlate with consistently low Te values (2-3 km) obtained throughout the entire marginal length of the ECMM. This result is consistent with the previous Te estimates of these margins, and confirms the idea that the low-Te segments in the central part of the WCMI and along the ECMM represents paleo-rift inception points of the lithospheric margins that was thermally and mechanically weakened by the combined action of the Marion hotspot and lithospheric extension during the rifting. The uniformly low-Te value (∼2 km) along the EACM indicates a mechanically weak lithospheric margin, probably due to considerable stretching of the lithosphere, considering the fact that this margin remained almost stationary throughout its rift history. In contrast, the ECMI has comparatively high-Te variations (5-11 km) that lack any correlation with the regional tectonic setting. Using gravity forward and inversion applications, we find a leading order of influence of sediment load on the flexural properties of this marginal lithosphere. The study concludes that the thick pile of the Bengal Fan sediments in the ECMI masks and has erased the signal of the original load-induced topography, and its gravity effect has biased the long-wavelength part of the observed gravity signal. The hence uncorrelated flat topography and deep lithospheric flexure together contribute a bias in the flexure modeling, which likely accounts a relatively high Te

Effect on Bone Architecture of Marginal Grooves in Dental Implants Under Occlusal Loaded Conditions in Beagle Dogs.

Science.gov (United States)

Kato, Hatsumi; Kuroshima, Shinichiro; Inaba, Nao; Uto, Yusuke; Sawase, Takashi

2018-02-01

The aim of this study was to clarify whether marginal grooves on dental implants affect osseointegration, bone structure, and the alignment of collagen fibers to determine bone quality under loaded conditions. Anodized Ti-6Al-4V alloy dental implants, with and without marginal grooves (test and control implants, respectively), were used (3.7 × 8.0 mm). Fourth premolars and first molars of 6 beagle mandibles were extracted. Two control and test implants were placed in randomly selected healed sites at 12 weeks after tooth extraction. Screw-retained single crowns for first molars were fabricated. Euthanasia was performed at 8 weeks after the application of occlusal forces. Implant marginal bone level, bone to implant contact (BIC), bone structure around dental implants, and the alignment of collagen fibers determining bone quality were analyzed. The marginal bone level in test implants was significantly higher than that in control implants. Occlusal forces significantly increased BIC in test implants ( P = .007), whereas BIC did not change in control implants, irrespective of occlusal forces ( P = .303). Moreover, occlusal forces significantly increased BIC in test implants compared with control implants ( P = .032). Additionally, occlusal forces preferentially aligned collagen fibers in test implants, but not control implants. Hence, marginal grooves on dental implants have positive effects on increased osseointegration and adapted bone quality based on the preferential alignment of collagen fibers around dental implants under loaded conditions.

Marginal versus Average Beta of Equity under Corporate Taxation

OpenAIRE

Lund, Diderik

2009-01-01

Even for fully equity-financed firms there may be substantial effects of taxation on the after-tax cost of capital. Among the few studies of these effects, even fewer identify all effects correctly. When marginal investment is taxed together with inframarginal, marginal beta differs from average if there are investment-related deductions like depreciation. To calculate asset betas, one should not only 'unlever observed equity betas, but 'untax' and 'unaverage' them. Risky tax claims are value...

Marginal Matter

Science.gov (United States)

van Hecke, Martin

2013-03-01

All around us, things are falling apart. The foam on our cappuccinos appears solid, but gentle stirring irreversibly changes its shape. Skin, a biological fiber network, is firm when you pinch it, but soft under light touch. Sand mimics a solid when we walk on the beach but a liquid when we pour it out of our shoes. Crucially, a marginal point separates the rigid or jammed state from the mechanical vacuum (freely flowing) state - at their marginal points, soft materials are neither solid nor liquid. Here I will show how the marginal point gives birth to a third sector of soft matter physics: intrinsically nonlinear mechanics. I will illustrate this with shock waves in weakly compressed granular media, the nonlinear rheology of foams, and the nonlinear mechanics of weakly connected elastic networks.

Evaluating the marginal utility principle for long-term hydropower scheduling

International Nuclear Information System (INIS)

Zhao, Tongtiegang; Zhao, Jianshi; Liu, Pan; Lei, Xiaohui

2015-01-01

Highlights: • Analysis of one-, two- and multi-period hydropower scheduling. • Derivation of marginal cost and marginal return of carry-over storage. • Evaluation of the marginal utility principle in a case study of the Three Gorges Reservoir. - Abstract: The conversion of the potential energy of dammed water into hydropower depends on both reservoir storage and release, which are the major difficulties in hydropower reservoir operation. This study evaluates the marginal utility principle, which determines the optimal carry-over storage between periods, for long-term hydropower scheduling. Increasing marginal cost and decreasing marginal return are two important characteristics that determine the marginal utility principle in water supply. However, the notion of decreasing marginal return is inapplicable in hydropower scheduling. Instead, the carry-over storage from one period has an increasing marginal contribution to the power generation in the next period. Although carry-over storage incurs an increasing marginal cost to the power generation in the current period, the marginal return is higher than the marginal cost. The marginal return from the carry-over storage further increases in the multi-period case. These findings suggest saving as much carry-over storage as possible, which is bounded by the operational constraints of storage capacity, environmental flow, and installed capacity in actual hydropower scheduling. The marginal utility principle is evaluated for a case study of the Three Gorges Reservoir, and the effects of the constraints are discussed. Results confirm the theoretical findings and show that the marginal return from carry-over storage is larger than the marginal cost. The operational constraints help determine the optimal carry-over storage.

Convexity and Marginal Vectors

NARCIS (Netherlands)

van Velzen, S.; Hamers, H.J.M.; Norde, H.W.

2002-01-01

In this paper we construct sets of marginal vectors of a TU game with the property that if the marginal vectors from these sets are core elements, then the game is convex.This approach leads to new upperbounds on the number of marginal vectors needed to characterize convexity.An other result is that

Comparison of resistive heating and forced-air warming to prevent inadvertent perioperative hypothermia.

Science.gov (United States)

John, M; Crook, D; Dasari, K; Eljelani, F; El-Haboby, A; Harper, C M

2016-02-01

Forced-air warming is a commonly used warming modality, which has been shown to reduce the incidence of inadvertent perioperative hypothermia (heating mattresses offer a potentially cheaper alternative, however, and one of the research recommendations from the National Institute for Health and Care Excellence was to evaluate such devices formally. We conducted a randomized single-blinded study comparing perioperative hypothermia in patients receiving resistive heating or forced-air warming. A total of 160 patients undergoing non-emergency surgery were recruited and randomly allocated to receive either forced-air warming (n=78) or resistive heating (n=82) in the perioperative period. Patient core temperatures were monitored after induction of anaesthesia until the end of surgery and in the recovery room. Our primary outcome measures included the final intraoperative temperature and incidence of hypothermia at the end of surgery. There was a significantly higher rate of hypothermia at the end of surgery in the resistive heating group compared with the forced-air warming group (P=0.017). Final intraoperative temperatures were also significantly lower in the resistive heating group (35.9 compared with 36.1°C, P=0.029). Hypothermia at the end of surgery in both warming groups was common (36% forced air warming, 54% resistive heating). Our results suggest that forced-air warming is more effective than resistive heating in preventing postoperative hypothermia. NCT01056991. © The Author 2016. Published by Oxford University Press on behalf of the British Journal of Anaesthesia. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Extensive management of field margins enhances their potential for off-site soil erosion mitigation.

Science.gov (United States)

Ali, Hamada E; Reineking, Björn

2016-03-15

Soil erosion is a widespread problem in agricultural landscapes, particularly in regions with strong rainfall events. Vegetated field margins can mitigate negative impacts of soil erosion off-site by trapping eroded material. Here we analyse how local management affects the trapping capacity of field margins in a monsoon region of South Korea, contrasting intensively and extensively managed field margins on both steep and shallow slopes. Prior to the beginning of monsoon season, we equipped a total of 12 sites representing three replicates for each of four different types of field margins ("intensive managed flat", "intensive managed steep", "extensive managed flat" and "extensive managed steep") with Astroturf mats. The mats (n = 15/site) were placed before, within and after the field margin. Sediment was collected after each rain event until the end of the monsoon season. The effect of management and slope on sediment trapping was analysed using linear mixed effects models, using as response variable either the sediment collected within the field margin or the difference in sediment collected after and before the field margin. There was no difference in the amount of sediment reaching the different field margin types. In contrast, extensively managed field margins showed a large reduction in collected sediment before and after the field margins. This effect was pronounced in steep field margins, and increased with the size of rainfall events. We conclude that a field margin management promoting a dense vegetation cover is a key to mitigating negative off-site effects of soil erosion in monsoon regions, particularly in field margins with steep slopes. Copyright © 2015 Elsevier Ltd. All rights reserved.

Large margin image set representation and classification

KAUST Repository

Wang, Jim Jing-Yan; Alzahrani, Majed A.; Gao, Xin

2014-01-01

In this paper, we propose a novel image set representation and classification method by maximizing the margin of image sets. The margin of an image set is defined as the difference of the distance to its nearest image set from different classes and the distance to its nearest image set of the same class. By modeling the image sets by using both their image samples and their affine hull models, and maximizing the margins of the images sets, the image set representation parameter learning problem is formulated as an minimization problem, which is further optimized by an expectation - maximization (EM) strategy with accelerated proximal gradient (APG) optimization in an iterative algorithm. To classify a given test image set, we assign it to the class which could provide the largest margin. Experiments on two applications of video-sequence-based face recognition demonstrate that the proposed method significantly outperforms state-of-the-art image set classification methods in terms of both effectiveness and efficiency.

Large margin image set representation and classification

KAUST Repository

Wang, Jim Jing-Yan

2014-07-06

In this paper, we propose a novel image set representation and classification method by maximizing the margin of image sets. The margin of an image set is defined as the difference of the distance to its nearest image set from different classes and the distance to its nearest image set of the same class. By modeling the image sets by using both their image samples and their affine hull models, and maximizing the margins of the images sets, the image set representation parameter learning problem is formulated as an minimization problem, which is further optimized by an expectation - maximization (EM) strategy with accelerated proximal gradient (APG) optimization in an iterative algorithm. To classify a given test image set, we assign it to the class which could provide the largest margin. Experiments on two applications of video-sequence-based face recognition demonstrate that the proposed method significantly outperforms state-of-the-art image set classification methods in terms of both effectiveness and efficiency.

Contributions to knowledge of the continental margin of Uruguay. Uruguayan continental margin: Physiographic and seismic analysis

International Nuclear Information System (INIS)

Preciozzi, F

2014-01-01

This work is about the kind of continental margins such as a )Atlantic type passive margins which can be hard or soft b) An active or Pacific margins that because of the very frequent earthquakes develop a morphology dominated by tectonic processes. The Uruguayan continental margin belongs to a soft Atlantic margin

Fixing soft margins

NARCIS (Netherlands)

P. Kofman (Paul); A. Vaal, de (Albert); C.G. de Vries (Casper)

1993-01-01

textabstractNon-parametric tolerance limits are employed to calculate soft margins such as advocated in Williamson's target zone proposal. In particular, the tradeoff between softness and zone width is quantified. This may be helpful in choosing appropriate margins. Furthermore, it offers

Active body surface warming systems for preventing complications caused by inadvertent perioperative hypothermia in adults.

Science.gov (United States)

Madrid, Eva; Urrútia, Gerard; Roqué i Figuls, Marta; Pardo-Hernandez, Hector; Campos, Juan Manuel; Paniagua, Pilar; Maestre, Luz; Alonso-Coello, Pablo

2016-04-21

Inadvertent perioperative hypothermia is a phenomenon that can occur as a result of the suppression of the central mechanisms of temperature regulation due to anaesthesia, and of prolonged exposure of large surfaces of skin to cold temperatures in operating rooms. Inadvertent perioperative hypothermia has been associated with clinical complications such as surgical site infection and wound-healing delay, increased bleeding or cardiovascular events. One of the most frequently used techniques to prevent inadvertent perioperative hypothermia is active body surface warming systems (ABSW), which generate heat mechanically (heating of air, water or gels) that is transferred to the patient via skin contact. To assess the effectiveness of pre- or intraoperative active body surface warming systems (ABSW), or both, to prevent perioperative complications from unintended hypothermia during surgery in adults. We searched the Cochrane Central Register of Controlled Trials (CENTRAL; Issue 9, 2015); MEDLINE (PubMed) (1964 to October 2015), EMBASE (Ovid) (1980 to October 2015), and CINAHL (Ovid) (1982 to October 2015). We included randomized controlled trials (RCTs) that compared an ABSW system aimed at maintaining normothermia perioperatively against a control or against any other ABSW system. Eligible studies also had to include relevant clinical outcomes other than measuring temperature alone. Several authors, by pairs, screened references and determined eligibility, extracted data, and assessed risks of bias. We resolved disagreements by discussion and consensus, with the collaboration of a third author. We included 67 trials with 5438 participants that comprised 79 comparisons. Forty-five RCTs compared ABSW versus control, whereas 18 compared two different types of ABSW, and 10 compared two different techniques to administer the same type of ABSW. Forced-air warming (FAW) was by far the most studied intervention.Trials varied widely regarding whether the interventions were

SOCIAL MARGINALIZATION AND HEALTH

Directory of Open Access Journals (Sweden)

Marjana Bogdanović

2007-04-01

Full Text Available The 20th century was characterized by special improvement in health. The aim of WHO’s policy EQUITY IN HEALTH is to enable equal accessibility and equal high quality of health care for all citizens. More or less some social groups have stayed out of many social systems even out of health care system in the condition of social marginalization. Phenomenon of social marginalization is characterized by dynamics. Marginalized persons have lack of control over their life and available resources. Social marginalization stands for a stroke on health and makes the health status worse. Low socio-economic level dramatically influences people’s health status, therefore, poverty and illness work together. Characteristic marginalized groups are: Roma people, people with AIDS, prisoners, persons with development disorders, persons with mental health disorders, refugees, homosexual people, delinquents, prostitutes, drug consumers, homeless…There is a mutual responsibility of community and marginalized individuals in trying to resolve the problem. Health and other problems could be solved only by multisector approach to well-designed programs.

Pickering seismic safety margin

International Nuclear Information System (INIS)

Ghobarah, A.; Heidebrecht, A.C.; Tso, W.K.

1992-06-01

A study was conducted to recommend a methodology for the seismic safety margin review of existing Canadian CANDU nuclear generating stations such as Pickering A. The purpose of the seismic safety margin review is to determine whether the nuclear plant has sufficient seismic safety margin over its design basis to assure plant safety. In this review process, it is possible to identify the weak links which might limit the seismic performance of critical structures, systems and components. The proposed methodology is a modification the EPRI (Electric Power Research Institute) approach. The methodology includes: the characterization of the site margin earthquake, the definition of the performance criteria for the elements of a success path, and the determination of the seismic withstand capacity. It is proposed that the margin earthquake be established on the basis of using historical records and the regional seismo-tectonic and site specific evaluations. The ability of the components and systems to withstand the margin earthquake is determined by database comparisons, inspection, analysis or testing. An implementation plan for the application of the methodology to the Pickering A NGS is prepared

Inadvertent Exemplars: Life History Portraits of Two Socially Just Principals

Science.gov (United States)

Scanlan, Martin

2012-01-01

This study creates life history portraits of two White middle-class native-English-speaking principals demonstrating commitments to social justice in their work in public elementary schools serving disproportionately high populations of students who are marginalized by poverty, race, and linguistic heritage. Through self-reported life histories of…

Indian Ocean margins

Digital Repository Service at National Institute of Oceanography (India)

Naqvi, S.W.A

in the latter two areas. Some of these fluxes are expected to be substantial in the case of Indonesian continental margins and probably also across the eastern coasts of Africa not covered in this chapter. However, a dearth of information makes these margins...

Clinical Effect of Dental Adhesive on Marginal Integrity in Class I And Class II Resin-Composite Restorations

Directory of Open Access Journals (Sweden)

Manchorova-Veleva Neshka A.

2015-12-01

Full Text Available BACKGROUND: Dental adhesives are believed to influence marginal adaptation and marginal discoloration when used under posterior resin-based composite restorations. Studies on the latest adhesive systems reveal that the group of the three-step etch-and-rinse adhesive (3-E&RA and the one-step self-etch adhesive (1-SEA have entirely different bonding mechanisms, as well as different bond strength and resistance to chemical, thermal and mechanical factors. STUDY OBJECTIVES: A hypothesis that a 1-SEA would result in greater enamel marginal discoloration and poorer marginal adaptation than a 3-E&RA was tested. MATERIAL AND METHODS: One hundred restorations were placed with a 1-SEA and 100 restorations with a 3-E&RA. Teeth were restored with Filtek Supreme nanofilled resin-composite and were evaluated for marginal adaptation and marginal discoloration at baseline, and 6 months, 12 months, and 36 months postoperatively. RESULTS: The statistical analysis revealed significant differences in marginal integrity between test groups. The 1-SEA resulted in greater enamel marginal discoloration and poorer marginal adaptation than the 3-E&RA at any recall time. CONCLUSIONS: Marginal adaptation and marginal discoloration depend on the type of dentin adhesive used. The restorations with Filtek Supreme and Scotchbond MP are better than the restorations with Adper Prompt L-Pop with regard to the marginal adaptation and marginal discoloration at 6-, 12- and 36-month evaluations.

Sinus anatomy associated with inadvertent cerebrospinal fluid leak during functional endoscopic sinus surgery.

Science.gov (United States)

Heaton, Chase M; Goldberg, Andrew N; Pletcher, Steven D; Glastonbury, Christine M

2012-07-01

Anatomic variations in skull base anatomy may predispose the surgeon to inadvertent skull base injury with resultant cerebrospinal fluid (CSF) leak during functional endoscopic sinus surgery (ESS). Our objective was to compare preoperative sinus imaging of patients who underwent FESS with and without CSF leak to elucidate these variations. In this retrospective case-control study, 18 patients with CSF leak following FESS for chronic rhinosinusitis (CRS) from 2000 to 2011 were compared to 18 randomly selected patients who underwent preoperative imaging for FESS for CRS. Measurements were obtained from preoperative computed tomography images with specific attention to anatomic differences in cribriform plate and ethmoid roof heights in the coronal plane, and the skull base angle in the sagittal plane. Mean values of measured variables were compared using a nonparametric Mann-Whitney test. When compared to controls, patients with CSF leak demonstrated a greater angle of the skull base in the sagittal plane (P variations may help to prevent iatrogenic CSF leak. Copyright © 2012 The American Laryngological, Rhinological, and Otological Society, Inc.

Marginal kidney donor

Directory of Open Access Journals (Sweden)

Ganesh Gopalakrishnan

2007-01-01

Full Text Available Renal transplantation is the treatment of choice for a medically eligible patient with end stage renal disease. The number of renal transplants has increased rapidly over the last two decades. However, the demand for organs has increased even more. This disparity between the availability of organs and waitlisted patients for transplants has forced many transplant centers across the world to use marginal kidneys and donors. We performed a Medline search to establish the current status of marginal kidney donors in the world. Transplant programs using marginal deceased renal grafts is well established. The focus is now on efforts to improve their results. Utilization of non-heart-beating donors is still in a plateau phase and comprises a minor percentage of deceased donations. The main concern is primary non-function of the renal graft apart from legal and ethical issues. Transplants with living donors outnumbered cadaveric transplants at many centers in the last decade. There has been an increased use of marginal living kidney donors with some acceptable medical risks. Our primary concern is the safety of the living donor. There is not enough scientific data available to quantify the risks involved for such donation. The definition of marginal living donor is still not clear and there are no uniform recommendations. The decision must be tailored to each donor who in turn should be actively involved at all levels of the decision-making process. In the current circumstances, our responsibility is very crucial in making decisions for either accepting or rejecting a marginal living donor.

Effect of MLC Leaf Width and PTV Margin on the Treatment Planning of Intensity-Modulated Stereotactic Radiosurgery (IMSRS) or Radiotherapy (IMSRT)

International Nuclear Information System (INIS)

Chang Jenghwa; Yenice, Kamil M.; Jiang Kailiu; Hunt, Margie; Narayana, Ashwatha

2009-01-01

We studied the effect of MLC (multileaf collimator) leaf width and PTV (planning target volume) margin on treatment planning of intensity modulated stereotactic radiosurgery (IMSRS) or radiotherapy (IMSRT). Twelve patients previously treated with IMSRS/IMSRT were retrospectively planned with 5- and 3-mm MLC leaf widths and 3- and 2-mm PTV margins using the already contoured clinical target volume and critical structures. The same beam arrangement, planning parameters, and optimization method were used in each of the 4 plans for a given patient. Each plan was normalized so that the prescription dose covered at least 99% of the PTV. Plan indices - D mean (mean dose), conformity index (CI), V 70 (volume receiving ≥ 70% of the prescription dose), and V 50 (volume receiving ≥ 50% of the prescription dose) - were calculated from the dose-volume histograms (DVHs) of the PTV, normal tissue, and organs at risk (OARs). Hypothesis testing was performed on the mean ratios of plan indices to determine the statistical significance of the relative differences. The PTV was well covered for all plans, as no significant differences were observed for D 95 , V 95 , D max , D min , and D mean of the PTV. The irradiated volume was ∼23% smaller when 2-mm instead of 3-mm PTV margin was used, but it was only reduced by ∼6% when the MLC leaf width was reduced from 5 mm to 3 mm. For normal tissue and brainstem, V 70 , V 50 , and D mean were reduced more effectively by a decrease in MLC width, while D mean of optic nerve and chiasm were more sensitive to a change in PTV margin. The DVH statistics for the PTV and normal structures from the treatment plan with 5-mm MLC and 2-mm PTV margin were equal to those with 3-mm MLC and 3-mm PTV margin. PTV margin reduction is more effective in sparing the normal tissue and OARs than a reduction in MLC leaf width. For IMSRS, where highly accurate setup and small PTV margins are routinely employed, the use of 5-mm MLC is therefore less desirable.

Effect of gingival fluid on marginal adaptation of Class II resin-based composite restorations.

Science.gov (United States)

Spahr, A; Schön, F; Haller, B

2000-10-01

To evaluate in vitro the marginal quality of Class II composite restorations at the gingival enamel margins as affected by contamination of the cavities with gingival fluid (GF) during different steps of resin bonding procedures. 70 Class II cavities were prepared in extracted human molars and restored with composite using a multi-component bonding system (OptiBond FL/Herculite XRV; OPTI) or a single-bottle adhesive (Syntac Sprint/Tetric Ceram; SYN). The cavities were contaminated with human GF: C1 after acid etching, C2 after application of the primer (OPTI) or light-curing of the primer-adhesive (SYN), and C3 after light-curing of the resin adhesive (OPTI). Uncontaminated cavities were used as the control (C0). The restored teeth were subjected to thermocycling (TC) and replicated for SEM analysis of marginal gap formation. Microleakage at the gingival margins was determined by dye penetration with basic fuchsin. non-parametric tests (Kruskal-Wallis test, Mann-Whitney test with Bonferroni correction). In both bonding systems, contamination with GF after acid etching (C1) did not impair the marginal quality; the mean percentages of continuous margin/mean depths of dye penetration were: OPTI: C0: 88.5%/0.10 mm, C1: 95.6%/0.04 mm; SYN: C0: 90.9%/0.08 mm, C1: 97.0%/0.05 mm. Marginal adaptation was adversely affected when GF contamination was performed after

Preface: Biogeochemistry–ecosystem interaction on changing continental margins in the Anthropocene

Digital Repository Service at National Institute of Oceanography (India)

Liu, K-K.; Emeis, K.-C.; Levin, L.A.; Naqvi, S.W.A.; Roman, M.

and hypercapnia in upwelling systems • Interactions between natural and social sciences for better steward- ship of continental margins. It has long been acknowledged (e.g., Doney, 2010; Liu et al., 2010) that marine ecosystems on continental margins, including... and possibly manage margin ecosystems in a changing world. Effective governance of social–ecological systems on continental margins is key to reducing the pervasive over- exploitation, depletion and destruction of marine resources and http://dx.doi.org/10...

Margins for treatment planning of proton therapy

International Nuclear Information System (INIS)

Thomas, Simon J

2006-01-01

For protons and other charged particles, the effect of set-up errors on the position of isodoses is considerably less in the direction of the incident beam than it is laterally. Therefore, the margins required between the clinical target volume (CTV) and planning target volume (PTV) can be less in the direction of the incident beam than laterally. Margins have been calculated for a typical head plan and a typical prostate plan, for a single field, a parallel opposed and a four-field arrangement of protons, and compared with margins calculated for photons, assuming identical geometrical uncertainties for each modality. In the head plan, where internal motion was assumed negligible, the CTV-PTV margin reduced from approximately 10 mm to 3 mm in the axial direction for the single field and parallel opposed plans. For a prostate plan, where internal motion cannot be ignored, the corresponding reduction in margin was from 11 mm to 7 mm. The planning organ at risk (PRV) margin in the axial direction reduced from 6 mm to 2 mm for the head plan, and from 7 mm to 4 mm for the prostate plan. No reduction was seen on the other axes, or for any axis of the four-field plans. Owing to the shape of proton dose distributions, there are many clinical cases in which good dose distributions can be obtained with one or two fields. When this is done, it is possible to use smaller PTV and PRV margins. This has the potential to convert untreatable cases, in which the PTV and PRV overlap, into cases with a gap between PTV and PRV of adequate size for treatment planning

On marginal regeneration

NARCIS (Netherlands)

Stein, H.N.

1991-01-01

On applying the marginal regeneration concept to the drainage of free liquid films, problems are encountered: the films do not show a "neck" of minimum thickness at the film/border transition; and the causes of the direction dependence of the marginal regeneration are unclear. Both problems can be

Marketing margins and agricultural technology in Mozambique

DEFF Research Database (Denmark)

Arndt, Channing; Jensen, Henning Tarp; Robinson, Sherman

2000-01-01

of improved agricultural technology and lower marketing margins yield welfare gains across the economy. In addition, a combined scenario reveals significant synergy effects, as gains exceed the sum of gains from the individual scenarios. Relative welfare improvements are higher for poor rural households......Improvements in agricultural productivity and reductions in marketing costs in Mozambique are analysed using a computable general equilibrium (CGE) model. The model incorporates detailed marketing margins and separates household demand for marketed and home-produced goods. Individual simulations...

Indigenous women's voices: marginalization and health.

Science.gov (United States)

Dodgson, Joan E; Struthers, Roxanne

2005-10-01

Marginalization may affect health care delivery. Ways in which indigenous women experienced marginalization were examined. Data from 57 indigenous women (18 to 65 years) were analyzed for themes. Three themes emerged: historical trauma as lived marginalization, biculturalism experienced as marginalization, and interacting within a complex health care system. Experienced marginalization reflected participants' unique perspective and were congruent with previous research. It is necessary for health care providers to assess the detrimental impact of marginalization on the health status of individuals and/or communities.

Effect of placement of droop based generators in distribution network on small signal stability margin and network loss

DEFF Research Database (Denmark)

Dheer, D.K.; Doolla, S.; Bandyopadhyay, S.

2017-01-01

, small signal stability margin is on the fore. The present research studied the effect of location of droop-controlled DGs on small signal stability margin and network loss on a modified IEEE 13 bus system, an IEEE 33-bus distribution system and a practical 22-bus radial distribution network. A complete...... loss and stability margin is further investigated by identifying the Pareto fronts for modified IEEE 13 bus, IEEE 33 and practical 22-bus radial distribution network with application of Reference point based Non-dominated Sorting Genetic Algorithm (R-NSGA). Results were validated by time domain......For a utility-connected system, issues related to small signal stability with Distributed Generators (DGs) are insignificant due to the presence of a very strong grid. Optimally placed sources in utility connected microgrid system may not be optimal/stable in islanded condition. Among others issues...

The effect of porcelain firing and type of finish line on the marginal fit of zirconia copings.

Science.gov (United States)

Vojdani, Mahroo; Safari, Anahita; Mohaghegh, Mina; Pardis, Soheil; Mahdavi, Farideh

2015-06-01

Although all-ceramic restorations are broadly used, there is a lack of information concerning how their fit is affected by fabrication procedure and marginal configuration. The purpose of this study was to evaluate the marginal fit of zirconia CAD/CAM ceramic crowns before and after porcelain firing. The influence of finish line configuration on the marginal fit was also evaluated. Twenty standardized zirconia CAD/CAM copings were fabricated for chamfer and shoulder finish line designs (n=10). The marginal fit of specimens was measured on 18 points, marked on the master metal die by using a digital microscope. After the crowns were finalized by porcelain veneering, the measurements of marginal fit were performed again. The means and standard deviations were calculated and data were analyzed using student's t-test and paired t-test (α=0.05). There were significant differences between marginal fit of chamfer and shoulder finish line groups before and after porcelain firing (p= 0.014 and p= 0.000, respectively). The marginal gap of copings with shoulder finish line was significantly smaller than those with chamfer configuration (p= 0.000), but there were no significant differences between the two marginal designs, after porcelain firing (p= 0.341). Porcelain veneering was found to have a statistically significant influence on the marginal fit of zirconia CAD/CAM crowns. Both margin configurations showed marginal gaps that were within a reported clinically acceptable range of marginal discrepancy.

Refining margins and prospects

International Nuclear Information System (INIS)

Baudouin, C.; Favennec, J.P.

1997-01-01

Refining margins throughout the world have remained low in 1996. In Europe, in spite of an improvement, particularly during the last few weeks, they are still not high enough to finance new investments. Although the demand for petroleum products is increasing, experts are still sceptical about any rapid recovery due to prevailing overcapacity and to continuing capacity growth. After a historical review of margins and an analysis of margins by regions, we analyse refining over-capacities in Europe and the unbalances between production and demand. Then we discuss the current situation concerning barriers to the rationalization, agreements between oil companies, and the consequences on the future of refining capacities and margins. (author)

Safety margins in deterministic safety analysis

International Nuclear Information System (INIS)

Viktorov, A.

2011-01-01

The concept of safety margins has acquired certain prominence in the attempts to demonstrate quantitatively the level of the nuclear power plant safety by means of deterministic analysis, especially when considering impacts from plant ageing and discovery issues. A number of international or industry publications exist that discuss various applications and interpretations of safety margins. The objective of this presentation is to bring together and examine in some detail, from the regulatory point of view, the safety margins that relate to deterministic safety analysis. In this paper, definitions of various safety margins are presented and discussed along with the regulatory expectations for them. Interrelationships of analysis input and output parameters with corresponding limits are explored. It is shown that the overall safety margin is composed of several components each having different origins and potential uses; in particular, margins associated with analysis output parameters are contrasted with margins linked to the analysis input. While these are separate, it is possible to influence output margins through the analysis input, and analysis method. Preserving safety margins is tantamount to maintaining safety. At the same time, efficiency of operation requires optimization of safety margins taking into account various technical and regulatory considerations. For this, basic definitions and rules for safety margins must be first established. (author)

Expert judgment on markers to deter inadvertent human intrusion into the Waste Isolation Pilot Plant

Energy Technology Data Exchange (ETDEWEB)

Trauth, K.M. [Sandia National Labs., Albuquerque, NM (United States); Hora, S.C. [Hawaii Univ., Hilo, HI (United States); Guzowski, R.V. [Science Applications International Corp., San Diego, CA (United States)

1993-11-01

The expert panel identified basic principles to guide current and future marker development efforts: (1) the site must be marked, (2) message(s) must be truthful and informative, (3) multiple components within a marker system, (4) multiple means of communication (e.g., language, pictographs, scientific diagrams), (5) multiple levels of complexity within individual messages on individual marker system elements, (6) use of materials with little recycle value, and (7) international effort to maintain knowledge of the locations and contents of nuclear waste repositories. The efficacy of the markers in deterring inadvertent human intrusion was estimated to decrease with time, with the probability function varying with the mode of intrusion (who is intruding and for what purpose) and the level of technological development of the society. The development of a permanent, passive marker system capable of surviving and remaining interpretable for 10,000 years will require further study prior to implementation.

Expert judgment on markers to deter inadvertent human intrusion into the Waste Isolation Pilot Plant

International Nuclear Information System (INIS)

Trauth, K.M.; Hora, S.C.; Guzowski, R.V.

1993-11-01

The expert panel identified basic principles to guide current and future marker development efforts: (1) the site must be marked, (2) message(s) must be truthful and informative, (3) multiple components within a marker system, (4) multiple means of communication (e.g., language, pictographs, scientific diagrams), (5) multiple levels of complexity within individual messages on individual marker system elements, (6) use of materials with little recycle value, and (7) international effort to maintain knowledge of the locations and contents of nuclear waste repositories. The efficacy of the markers in deterring inadvertent human intrusion was estimated to decrease with time, with the probability function varying with the mode of intrusion (who is intruding and for what purpose) and the level of technological development of the society. The development of a permanent, passive marker system capable of surviving and remaining interpretable for 10,000 years will require further study prior to implementation

Effect of water temperature on the fit of provisional crown margins during polymerization: An in vitro study

Directory of Open Access Journals (Sweden)

Vivekanandan Ramkumar

2012-01-01

Full Text Available Aim: To evaluate the effect of water temperature on the marginal fit of bis-acrylic composite provisional crown during resin polymerization. Materials and Methods: Precisely machined 10 brass master dies were designed to simulate molar teeth. Five brass dies were selected and precisely machined to simulate all ceramic crown preparation. An acrylic jaw replica was made in which brass dies were arranged equidistant from each other. A custom-made metallic tray was fabricated on the acrylic jaw replica to make polyvinyl siloxane impression matrix. Bis-acrylic composite resin provisional crowns were made using polyvinyl siloxane impression matrix. Provisional crowns were polymerized at room temperature (Group I direct technique, on dental stone cast; Group I indirect technique crowns and at different water temperatures (Group II direct technique crowns. The vertical marginal gap between all the provisional crown margins and the finish line of brass dies was measured using a Research Stereomicroscope System. Results: The results were statistically analyzed using one-way analysis of variance (ANOVA test and Newman-Keul′s test. The results showed that crowns polymerized in 20°C and 30°C water had marginal gap approximately three times smaller than those polymerized in 30°C air, due to the reduced polymerization shrinkage. Conclusion: This study shows that crowns polymerized in 20°C and 30°C water had mean vertical marginal gap approximately three times smaller than those polymerized in 30°C air. It was approximately closer to that of crowns fabricated by indirect technique. Warmer water also supposedly hastens polymerization.

Effect of water temperature on the fit of provisional crown margins during polymerization: An in vitro study.

Science.gov (United States)

Ramkumar, Vivekanandan; Sangeetha, Arunachalam; Kumar, Vinaya

2012-08-01

To evaluate the effect of water temperature on the marginal fit of bis-acrylic composite provisional crown during resin polymerization. Precisely machined 10 brass master dies were designed to simulate molar teeth. Five brass dies were selected and precisely machined to simulate all ceramic crown preparation. An acrylic jaw replica was made in which brass dies were arranged equidistant from each other. A custom-made metallic tray was fabricated on the acrylic jaw replica to make polyvinyl siloxane impression matrix. Bis-acrylic composite resin provisional crowns were made using polyvinyl siloxane impression matrix. Provisional crowns were polymerized at room temperature (Group I direct technique, on dental stone cast; Group I indirect technique crowns) and at different water temperatures (Group II direct technique crowns). The vertical marginal gap between all the provisional crown margins and the finish line of brass dies was measured using a Research Stereomicroscope System. The results were statistically analyzed using one-way analysis of variance (ANOVA) test and Newman-Keul's test. The results showed that crowns polymerized in 20°C and 30°C water had marginal gap approximately three times smaller than those polymerized in 30°C air, due to the reduced polymerization shrinkage. This study shows that crowns polymerized in 20°C and 30°C water had mean vertical marginal gap approximately three times smaller than those polymerized in 30°C air. It was approximately closer to that of crowns fabricated by indirect technique. Warmer water also supposedly hastens polymerization.

Marginal Models for Categorial Data

NARCIS (Netherlands)

Bergsma, W.P.; Rudas, T.

2002-01-01

Statistical models defined by imposing restrictions on marginal distributions of contingency tables have received considerable attention recently. This paper introduces a general definition of marginal log-linear parameters and describes conditions for a marginal log-linear parameter to be a smooth

Effect of Crystallization Firing on Marginal Gap of CAD/CAM Fabricated Lithium Disilicate Crowns.

Science.gov (United States)

Gold, Steven A; Ferracane, Jack L; da Costa, Juliana

2018-01-01

To evaluate the marginal gaps of CAD/CAM (CEREC 3) produced crowns made from leucite-reinforced glass-ceramic (IPS Empress CAD) blocks (LG), and lithium-disilicate (IPS e.max CAD) blocks before (LD-B), and after (LD-A) crystallization firing. A human molar tooth (#19) was mounted with adjacent teeth on a typodont and prepared for a full-coverage ceramic crown. The typodont was assembled in the mannequin head to simulate clinical conditions. After tooth preparation 15 individual optical impressions were taken by the same operator using titanium dioxide powder and a CEREC 3 camera per manufacturer's instructions. One operator designed and machined the crowns in leucite-reinforced glass-ceramic blocks (n = 5) and lithium-disilicate blocks (n = 10) using the CEREC 3 system. The crowns were rigidly seated on the prepared tooth, and marginal gaps (μm) were measured with an optical microscope (500×) at 12 points, 3 on each of the M, B, D, and L surfaces of the leucite-reinforced glass-ceramic crowns and the lithium-disilicate crowns before and after crystallization firing. Results were analyzed by two-way ANOVA followed by a Tukey's post hoc multiple comparison test (α = 0.05). The overall mean marginal gaps (μm) for the crowns evaluated were: LG = 49.2 ± 5.5, LD-B = 42.9 ± 12.2, and LD-A = 57.2 ± 16.0. The marginal gaps for LG and LD-B were not significantly different, but both were significantly less than for LD-A. The type of ceramic material did not affect the marginal gap of CAD/CAM crowns. The crystallization firing process required for lithium-disilicate crowns resulted in a significant increase in marginal gap size, likely due to shrinkage of the ceramic during the crystallization process. The marginal gap of CAD/CAM-fabricated lithium disilicate crowns increases following crystallization firing. The marginal gap still remains within clinically acceptable parameters. © 2017 by the American College of Prosthodontists.

On the effect of pulsating flow on surge margin of small centrifugal compressors for automotive engines

Energy Technology Data Exchange (ETDEWEB)

Galindo, J.; Climent, H.; Guardiola, C.; Tiseira, A. [CMT-Motores Termicos, Universidad Politecnica de Valencia (Spain); Camino de Vera s/n, E 46022, Valencia (Spain)

2009-11-15

Surge is becoming a limiting factor in the design of boosting systems of downsized diesel engines. Although standard compressor flowcharts are used for the selection of those machines for a given application, on-engine conditions widely differ from steady flow conditions, thus affecting compressor behaviour and consequently surge phenomenon. In this paper the effect of pulsating flow is investigated by means of a steady gas-stand that has been modified to produce engine-like pulsating flow. The effect of pressure pulses' amplitude and frequency on the compressor surge line location has been checked. Results show that pulsating flow in the 40-67 Hz range (corresponding to characteristic pulsation when boosting an internal combustion engine) increases surge margin. This increased margin is similar for all the tested frequencies but depends on pulsation amplitude. In a further step, a non-steady compressor model is used for modelling the tests, thus allowing a deeper analysis of the involved phenomena. Model results widely agree with experimental results. (author)

Effect of Preparation Depth on the Marginal and Internal Adaptation of Computer-aided Design/Computer-assisted Manufacture Endocrowns.

Science.gov (United States)

Gaintantzopoulou, M D; El-Damanhoury, H M

The aim of the study was to evaluate the effect of preparation depth and intraradicular extension on the marginal and internal adaptation of computer-aided design/computer-assisted manufacture (CAD/CAM) endocrown restorations. Standardized preparations were made in resin endodontic tooth models (Nissin Dental), with an intracoronal preparation depth of 2 mm (group H2), with extra 1- (group H3) or 2-mm (group H4) intraradicular extensions in the root canals (n=12). Vita Enamic polymer-infiltrated ceramic-network material endocrowns were fabricated using the CEREC AC CAD/CAM system and were seated on the prepared teeth. Specimens were evaluated by microtomography. Horizontal and vertical tomographic sections were recorded and reconstructed by using the CTSkan software (TView v1.1, Skyscan).The surface/void volume (S/V) in the region of interest was calculated. Marginal gap (MG), absolute marginal discrepancy (MD), and internal marginal gap were measured at various measuring locations and calculated in microscale (μm). Marginal and internal discrepancy data (μm) were analyzed with nonparametric Kruskal-Wallis analysis of variance by ranks with Dunn's post hoc, whereas S/V data were analyzed by one-way analysis of variance and Bonferroni multiple comparisons (α=0.05). Significant differences were found in MG, MD, and internal gap width values between the groups, with H2 showing the lowest values from all groups. S/V calculations presented significant differences between H2 and the other two groups (H3 and H4) tested, with H2 again showing the lowest values. Increasing the intraradicular extension of endocrown restorations increased the marginal and internal gap of endocrown restorations.

Perceived marginalization and aggression: a longitudinal study with low-educated adolescents.

Science.gov (United States)

Issmer, Christian; Wagner, Ulrich

2015-03-01

Social exclusion can evoke aggression. In the past two decades research has demonstrated this effect both for interpersonal and societal forms of exclusion. In addition, recent violent uprisings, like the London riots in August 2011, have been linked to social exclusion in the media. However, so far there is a lack of longitudinal studies which examine the aggression-enhancing effect of societal-level exclusion (i.e., marginalization) in disadvantaged groups. This research investigates the impact of perceived marginalization on aggression in a sample of N = 181 adolescents with a low educational background by means of a two-wave longitudinal study. The results of structural equation analyses are consistent with the hypothesis that perceived marginalization enhances aggression, and that this effect is mediated by the extent of negative societal meta-stereotypes. Furthermore, the reverse path from aggression to perceptions of marginalization is also significant. We discuss the implications of these findings and highlight practical consequences. © 2014 The British Psychological Society.

Inter-assembly gap deviations in VVER-1000: Accounting for effects on engineering margin factors

Energy Technology Data Exchange (ETDEWEB)

Shishkov, Lev; Gorodkov, Sergey; Mikailov, Eldar; Sukhino-Khomenko, Evgenia [Nuclear Research Centre ' ' Kurchatov Institute' ' , Moscow (Russian Federation)

2015-09-15

Jacketless fuel assemblies change their form in the course of operation. Often they bow lengthwise. Primarily, these fuel assembly (FA) bows threaten to reduce the control rods' fall rate, but at the same time they change (e.g. increase) the amount of moderator in inter-assembly gaps, thus producing additional power surges. Gap sizes vary randomly and their impact is accounted for with the help of engineering margin factors. For VVER-1000, this account of engineering margin factors increases the fuel component of electricity generation cost by 3 - 5 %, and a half of this increase is due to inter- assembly gap variations. This paper discusses the technique used to account for the impact produced by these gaps on fuel rod power; gives numerical values of sensitivity factors for power variations vs. gap sizes depending on the computational model assumed; and discusses the interference of gap effects and the account of power and coolant temperature feedbacks.

Digital Margins : How spatially and socially marginalized communities deal with digital exclusion

NARCIS (Netherlands)

Salemink, Koen

2016-01-01

The increasing importance of the Internet as a means of communication has transformed economies and societies. For spatially and socially marginalized communities, this transformation has resulted in digital exclusion and further marginalization. This book presents a study of two kinds of

A proposed alternative approach for protection of inadvertent human intruders from buried Department of Energy low level radioactive wastes

International Nuclear Information System (INIS)

Cochran, J.R.

1995-01-01

The burial of radioactive wastes creates a legacy. To limit the impact of this legacy on future generations, we establish and comply with performance objectives. This paper reviews performance objectives for the long-term isolation of buried radioactive wastes; identifies regulatorly-defined performance objectives for protecting the inadvertent human intruder (IHI) from buried low-level radioactive waste (LLW); (3) discusses a shortcoming of the current approach; and (4) offers an alternative approach for protecting the IHI. This alternative approach is written specifically for the burial of US Department of Energy (DOE) wastes at the Nevada Test Site (NTS), although the approach might be applied at other DOE burial sites

Continental transform margins : state of art and future milestones

Science.gov (United States)

Basile, Christophe

2010-05-01

to be emphasized. There is not only one type of transform margins, but as for divergent margins huge changes from one margin to another in both structure and evolution. Multiple types have to be evidenced together with the various parameters that should control the variability. As for divergent margins, special attention should be paid to conjugated transform margins as a tool to assess symmetrical / asymmetrical processes in the oceanic opening. Attention should also be focused on the three-dimensional structure of the intersections between transform and divergent margins, such as the one where the giant oil field Jubilee was recently discovered. There is almost no 3D data available in these area, and their structures still have to be described. An other key point to develop is the mechanical behavior of the lithosphere in and in the vicinity of transform margins. The classical behaviors (isostasy, elastic flexure) have be tested extensively. The localization of the deformation by the transform fault, and the coupling of continental and oceanic lithosphere across the transform fault have to be adressed to understand the evolution of these margins. Again as for divergent margins, new concepts are needed to explain the variations in the post-rift and post-transform subsidence, that can not always be explained by classical subsidence models. But the most remarkable advance in our understanding of transform margins may be related to the study of interactions between the lithosphere and adjacent envelops : deep interactions with the mantle, as underplating, tectonic erosion, or possible lateral crustal flow ; surficial interactions between structural evolution, erosion and sedimentation processes in transform margins may affect the topography and bathymetry, thus the oceanic circulation with possible effects on regional and global climate.

Inadvertent weather modification urban areas - lessons for global climate change

Energy Technology Data Exchange (ETDEWEB)

Changnon, S A [Illinois State Water Survey, Champaign, IL (USA)

1992-05-01

Large metropolitan areas in North America, home to 65% of the USA's population, have created major changes in their climates over the past 150 years. The rate and amount of the urban climate change approximate those being predicted globally using climate models. Knowledge of urban weather and climate modification holds lessons for the global climate change issue. First, adjustments to urban climate changes can provide guidance for adjusting to global change. A second lesson relates to the difficulty but underscores the necessity of providing scientifically credible proof of change within the noise of natural climatic variability. The evolution of understanding about how urban conditions influence weather reveals several unexpected outcomes, particularly relating to precipitation changes. These suggest that similar future surprises can be expected in a changed global climate, a third lesson. In-depth studies of how urban climate changes affected the hydrologic cycle, the regional economy, and human activities were difficult because of data problems, lack of impact methodology, and necessity for multidisciplinary investigations. Similar impact studies for global climate change will require diverse scientific talents and funding commitments adequate to measure the complexity of impacts and human adjustments. Understanding the processes whereby urban areas and other human activities have altered the atmosphere and changed clouds and precipitation regionally appears highly relevant to the global climate-change issue. Scientific and governmental policy development needs to recognize an old axiom that became evident in the studies of inadvertent urban and regional climate change and their behavioural implications: Think globally but act locally. Global climate change is an international issue, and the atmosphere must be treated globally. But the impacts and the will to act and adjust will occur regionally.

Inadvertent weather modification urban areas - lessons for global climate change

International Nuclear Information System (INIS)

Changnon, S.A.

1992-01-01

Large metropolitan areas in North America, home to 65% of the USA's population, have created major changes in their climates over the past 150 years. The rate and amount of the urban climate change approximate those being predicted globally using climate models. Knowledge of urban weather and climate modification holds lessons for the global climate change issue. First, adjustments to urban climate changes can provide guidance for adjusting to global change. A second lesson relates to the difficulty but underscores the necessity of providing scientifically credible proof of change within the noise of natural climatic variability. The evolution of understanding about how urban conditions influence weather reveals several unexpected outcomes, particularly relating to precipitation changes. These suggest that similar future surprises can be expected in a changed global climate, a third lesson. In-depth studies of how urban climate changes affected the hydrologic cycle, the regional economy, and human activities were difficult because of data problems, lack of impact methodology, and necessity for multidisciplinary investigations. Similar impact studies for global climate change will require diverse scientific talents and funding commitments adequate to measure the complexity of impacts and human adjustments. Understanding the processes whereby urban areas and other human activities have altered the atmosphere and changed clouds and precipitation regionally appears highly relevant to the global climate-change issue. Scientific and governmental policy development needs to recognize an old axiom that became evident in the studies of inadvertent urban and regional climate change and their behavioural implications: Think globally but act locally. Global climate change is an international issue, and the atmosphere must be treated globally. But the impacts and the will to act and adjust will occur regionally

17 CFR 31.18 - Margin calls.

Science.gov (United States)

2010-04-01

... transaction merchant is unable to effect personal contact with a leverage customer, a telegram sent to the....18 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION LEVERAGE TRANSACTIONS § 31.18 Margin calls. (a) No leverage transaction merchant shall liquidate a leverage contract because of...

Looking for chemical reaction networks exhibiting a drift along a manifold of marginally stable states.

Science.gov (United States)

Brogioli, Doriano

2013-02-07

I recently reported some examples of mass-action equations that have a continuous manifold of marginally stable stationary states [Brogioli, D., 2010. Marginally stable chemical systems as precursors of life. Phys. Rev. Lett. 105, 058102; Brogioli, D., 2011. Marginal stability in chemical systems and its relevance in the origin of life. Phys. Rev. E 84, 031931]. The corresponding chemical reaction networks show nonclassical effects, i.e. a violation of the mass-action equations, under the effect of the concentration fluctuations: the chemical system drifts along the marginally stable states. I proposed that this effect is potentially involved in abiogenesis. In the present paper, I analyze the mathematical properties of mass-action equations of marginally stable chemical reaction networks. The marginal stability implies that the mass-action equations obey some conservation law; I show that the mathematical properties of the conserved quantity characterize the motion along the marginally stable stationary state manifold, i.e. they allow to predict if the fluctuations give rise to a random walk or a drift under the effect of concentration fluctuations. Moreover, I show that the presence of the drift along the manifold of marginally stable stationary-states is a critical property, i.e. at least one of the reaction constants must be fine tuned in order to obtain the drift. Copyright © 2012 Elsevier Ltd. All rights reserved.

Influence of Crack Morphology on Leak Before Break Margins

International Nuclear Information System (INIS)

Weilin Zang

2007-11-01

The purpose of the project is to evaluate the deterministic LBB-margins for different pipe systems in a Swedish PWR-plant and using different crack morphology parameters. Results: - The influence of crack morphology on Leak Before Break (LBB) margins is studied. The subject of the report is a number of LBB-submittals to SKI where deterministic LBB-margins are reported. These submittals typically uses a surface roughness of 0.0762 mm (300 microinch) and number of turns equal to zero and an in-house code for the leak rate evaluations. The present report has shown that these conditions give the largest LBB-margins both in terms of the quotient between the critical crack length and the leakage crack size and for the leak rate margin. - Crack morphology parameters have a strong influence on the leak rate evaluations. Using the SQUIRT code and more recent recommendations for crack morphology parameters, it is shown that in many cases the evaluated margins, using 1 gpm as the reference leak rate detection limit, are below the safety factor of 2 on crack size and 10 on leak rate, which is generally required for LBB approval. - The effect of including weld residual stresses on the LBB margins is also investigated. It is shown that for the two examples studied, weld residual stresses were important for the small diameter thin wall pipe whereas it was negligible for the large diameter thick wall pipe which had a self-balanced weld residual stress distribution

Control of Transboundary Movement of Radioactive Material Inadvertently Incorporated into Scrap Metal and Semi-finished Products of the Metal Recycling Industries. Results of the Meetings Conducted to Develop a Draft Code of Conduct

International Nuclear Information System (INIS)

2014-02-01

In 2010, the IAEA initiated the development of a code of conduct on the transboundary movement of radioactive material inadvertently incorporated into scrap metal and semi- finished products of the metal recycling industries (Metal Recycling Code of Conduct). The Metal Recycling Code of Conduct was intended to harmonize the approaches of Member States in relation to the discovery of radioactive material that may inadvertently be present in scrap metals and semi-finished products subject to transboundary movement, and their safe handling and management to facilitate regulatory control. The Metal Recycling Code of Conduct was envisaged as being complementary to the Safety Guide on Control of Orphan Sources and Other Radioactive Material in the Metal Recycling and Production Industries (IAEA Safety Standards Series No. SSG-17), which provides recommendations, principally within a national context, on the protection of workers, members of the public and the environment in relation to the control of radioactive material inadvertently incorporated in scrap metal. In February 2013, the third open-ended meeting of technical and legal experts to develop the Metal Recycling Code of Conduct was organized. The objective of this meeting was to address the comments received from Member States and to finalize the text of the draft Metal Recycling Code of Conduct. Representatives from 55 Member States, one non-Member State and the EU, together with seven observers from the metal recycling industry, reviewed the comments and revised the draft accordingly. In September 2013, in Resolution GC(57)/RES/9, the IAEA General Conference recorded that it 'Appreciates the intensive efforts undertaken by the Secretariat to develop a code of conduct on the transboundary movement of scrap metal, or materials produced from scrap metal, that may inadvertently contain radioactive material, and encourages the Secretariat to make the results of the discussion conducted on this issue available to

Experience during the monitoring of inactive scrap for the detection of inadvertent presence of radioactivity

International Nuclear Information System (INIS)

Sharma, Ranjit; Kumar, Anoj; Vikas; Patra, R.P.; Kumar, Vikas; Singh, Rajvir; Pradeepkumar, K.S.

2012-01-01

The inspection and certification of scrap material from nuclear facilities is a regulatory requirement to ensure that radioactive material will not reach public domain. Around the world, cases involving radioactive contamination of metallic components have occurred due to radioactive sources/contaminated metal scrap reaching the public domain. Radiological monitoring of inactive scrap material is essential as it may get into various usages in public domain where controls cannot be implemented. The method of detection is measurement of gamma dose rates due to any loose/fixed radioactive contamination in the scrap or presence of any radioactive material/source. In addition prevention of any inadvertent/malicious act leading to radioactive material reaching the public domain through scrap being essential, this monitoring gains further importance. This paper describes the methodology and experience in detection of presence of radioactivity at inactive Scrap monitoring facility. Even though radioactive sources of high strength with potential for serious environmental hazard have not been detected, few cases of contaminated material (MS plate/equipments etc with extremely low level of 137 Cs and Uranium contamination) have been detected and identified using portable gamma spectrometer. If proper monitoring is not carried out the dispersal of radioactivity to the environment can be a matter of concern due to metal scrap reaching recycling industry resulting in huge cost of decontamination and waste disposal. These events may also have negative impact on the export from the country resulting in economic losses. The impact of such events can be ruled out by effective scrap monitoring techniques which ensure that even small quantity of radioactivity escaping into public domain can be prevented. The methodology followed for monitoring of inactive scrap is found to be effective even for detection of presence of very low level of radioactivity

Margin improvement initiatives: realistic approaches

Energy Technology Data Exchange (ETDEWEB)

Chan, P.K.; Paquette, S. [Royal Military College of Canada, Chemistry and Chemical Engineering Dept., Kingston, ON (Canada); Cunning, T.A. [Department of National Defence, Ottawa, ON (Canada); French, C.; Bonin, H.W. [Royal Military College of Canada, Chemistry and Chemical Engineering Dept., Kingston, ON (Canada); Pandey, M. [Univ. of Waterloo, Waterloo, ON (Canada); Murchie, M. [Cameco Fuel Manufacturing, Port Hope, ON (Canada)

2014-07-01

With reactor core aging, safety margins are particularly tight. Two realistic and practical approaches are proposed here to recover margins. The first project is related to the use of a small amount of neutron absorbers in CANDU Natural Uranium (NU) fuel bundles. Preliminary results indicate that the fuelling transient and subsequent reactivity peak can be lowered to improve the reactor's operating margins, with minimal impact on burnup when less than 1000 mg of absorbers is added to a fuel bundle. The second project involves the statistical analysis of fuel manufacturing data to demonstrate safety margins. Probability distributions are fitted to actual fuel manufacturing datasets provided by Cameco Fuel Manufacturing, Inc. They are used to generate input for ELESTRES and ELOCA. It is found that the fuel response distributions are far below industrial failure limits, implying that margin exists in the current fuel design. (author)

Evaluation of motion management strategies based on required margins

International Nuclear Information System (INIS)

Sawkey, D; Svatos, M; Zankowski, C

2012-01-01

Strategies for delivering radiation to a moving lesion each require a margin to compensate for uncertainties in treatment. These motion margins have been determined here by separating the total uncertainty into components. Probability density functions for the individual sources of uncertainty were calculated for ten motion traces obtained from the literature. Motion margins required to compensate for the center of mass motion of the clinical treatment volume were found by convolving the individual sources of uncertainty. For measurements of position at a frequency of 33 Hz, system latency was the dominant source of positional uncertainty. Averaged over the ten motion traces, the motion margin for tracking with a latency of 200 ms was 4.6 mm. Gating with a duty cycle of 33% required a mean motion margin of 3.2–3.4 mm, and tracking with a latency of 100 ms required a motion margin of 3.1 mm. Feasible reductions in the effects of the sources of uncertainty, for example by using a simple prediction algorithm to anticipate the lesion position at the end of the latency period, resulted in a mean motion margin of 1.7 mm for tracking with a latency of 100 ms, 2.4 mm for tracking with a latency of 200 ms, and 2.1–2.2 mm for the gating strategies with duty cycles of 33%. A crossover tracking latency of 150 ms was found, below which tracking strategies could take advantage of narrower motion margins than gating strategies. The methods described here provide a means to guide selection of a motion management strategy for a given patient. (paper)

The marginal costs of greenhouse gas emissions

International Nuclear Information System (INIS)

Tol, R.S.J.

1999-01-01

Estimates of the marginal costs of greenhouse gas emissions are on important input to the decision how much society would want to spend on greenhouse gas emission reduction. Marginal cost estimates in the literature range between $5 and $25 per ton of carbon. Using similar assumptions, the FUND model finds marginal costs of $9--23/tC, depending on the discount rate. If the aggregation of impacts over countries accounts for inequalities in income distribution or for risk aversion, marginal costs would rise by about a factor of 3. Marginal costs per region are an order of magnitude smaller than global marginal costs. The ratios between the marginal costs of CO 2 and those of CH 4 and N 2 O are roughly equal to the global warming potentials of these gases. The uncertainty about the marginal costs is large and right-skewed. The expected value of the marginal costs lies about 35% above the best guess, the 95-percentile about 250%

Refining margins: recent trends

International Nuclear Information System (INIS)

Baudoin, C.; Favennec, J.P.

1999-01-01

Despite a business environment that was globally mediocre due primarily to the Asian crisis and to a mild winter in the northern hemisphere, the signs of improvement noted in the refining activity in 1996 were borne out in 1997. But the situation is not yet satisfactory in this sector: the low return on invested capital and the financing of environmental protection expenditure are giving cause for concern. In 1998, the drop in crude oil prices and the concomitant fall in petroleum product prices was ultimately rather favorable to margins. Two elements tended to put a damper on this relative optimism. First of all, margins continue to be extremely volatile and, secondly, the worsening of the economic and financial crisis observed during the summer made for a sharp decline in margins in all geographic regions, especially Asia. Since the beginning of 1999, refining margins are weak and utilization rates of refining capacities have decreased. (authors)

Criticality safety margins for mixtures of fissionable materials

International Nuclear Information System (INIS)

Williamson, T.G.; Mincey, J.F.

1992-01-01

In the determination of criticality safety margins, approximations for combinations of fissile and fissionable isotopes are sometimes used that go by names such as the rule of fractions or equivalency relations. Use of the rule of fractions to ensure criticality safety margins was discussed in an earlier paper. The purpose of this paper is to correct errors and to clarify some of the implications. Deviations of safety margins from those calculated by the rule of fractions are still noted; however, the deviations are less severe. Caution in applying such rules is still urged. In general, these approximations are based on American National Standard ANSI/ANS-8.15, Sec. 5.2. This section allows that ratios of material masses to their limits may be summed for fissile nuclides in aqueous solutions. It also allows the addition of nonfissile nuclides if an aqueous moderator is present and addresses the effects of infinite water or equivalent reflector. Water-reflected binary combinations of aqueous solutions of fissile materials, as well as binary combinations of fissile and fissionable metals, were considered. Some combinations were shown to significantly decrease the margin of subcriticality compared to the single-unit margins. In this study, it is confirmed that some combinations of metal units in an optimum geometry may significantly decrease the margin of subcriticality. For some combinations of aqueous solutions of fissile materials, the margin of subcriticality may also be reduced by very small amounts. The conclusion of Ref. 1 that analysts should be careful in applying equivalency relations for combining materials remains valid and sound advice. The ANSI/ANS standard, which allows the use of ratios of masses to their limits, applies to aqueous, fully water-reflected, single-unit solutions. Extensions to other situations should be considered with extreme care

Effect of Blood Contamination on Marginal Adaptation and Surface Microstructure of Mineral Trioxide Aggregate: A SEM Study.

Science.gov (United States)

Salem Milani, Amin; Rahimi, Saeed; Froughreyhani, Mohammad; Vahid Pakdel, Mahdi

2013-01-01

In various clinical situations, mineral trioxide aggregate (MTA) may come into direct contact or even be mixed with blood. The aim of the present study was to evaluate the effect of exposure to blood on marginal adaptation and surface microstructure of MTA. Thirty extracted human single-rooted teeth were used. Standard root canal treatment was carried out. Root-ends were resected, and retrocavities were prepared. The teeth were randomly divided into two groups (n = 15): in group 1, the internal surface of the cavities was coated with fresh blood. Then, the cavities were filled with MTA. The roots were immersed in molds containing fresh blood. In group 2, the aforementioned procedures were performed except that synthetic tissue fluid (STF) was used instead of blood. To assess the marginal adaptation, "gap perimeter" and "maximum gap width" were measured under scanning electron microscope. The surface microstructure was also examined. Independent samples t-test and Mann-Whitney U test were used to analyze the data. Maximum gap width and gap perimeter in the blood-exposed group were significantly larger than those in the STF-exposed group (p < 0.01). In the blood-exposed group, the crystals tended to be more rounded and less angular compared with the STF-exposed group, and there was a general lack of needle-like crystals. Exposure to blood during setting has a negative effect on marginal adaptation of MTA, and blood-exposed MTA has a different surface microstructure compared to STF-exposed MTA.

Margin Requirements and Equity Option Returns

DEFF Research Database (Denmark)

Hitzemann, Steffen; Hofmann, Michael; Uhrig-Homburg, Marliese

In equity option markets, traders face margin requirements both for the options themselves and for hedging-related positions in the underlying stock market. We show that these requirements carry a significant margin premium in the cross-section of equity option returns. The sign of the margin...... premium depends on demand pressure: If end-users are on the long side of the market, option returns decrease with margins, while they increase otherwise. Our results are statistically and economically significant and robust to different margin specifications and various control variables. We explain our...... findings by a model of funding-constrained derivatives dealers that require compensation for satisfying end-users’ option demand....

Margin Requirements and Equity Option Returns

DEFF Research Database (Denmark)

Hitzemann, Steffen; Hofmann, Michael; Uhrig-Homburg, Marliese

In equity option markets, traders face margin requirements both for the options themselves and for hedging-related positions in the underlying stock market. We show that these requirements carry a significant "margin premium" in the cross-section of equity option returns. The sign of the margin...... premium depends on demand pressure: If end-users are on the long side of the market, option returns decrease with margins, while they increase otherwise. Our results are statistically and economically significant and robust to different margin specifications and various control variables. We explain our...... findings by a model of funding-constrained derivatives dealers that require compensation for satisfying end-users’ option demand....

Decoding the Margins: What Can the Fractal Geometry of Basaltic Flow Margins Tell Us?

Science.gov (United States)

Schaefer, E. I.; Hamilton, C.; Neish, C.; Beard, S. P.; Bramson, A. M.; Sori, M.; Rader, E. L.

2016-12-01

Studying lava flows on other planetary bodies is essential to characterizing eruption styles and constraining the bodies' thermal evolution. Although planetary basaltic flows are common, many key features are not resolvable in orbital imagery. We are thus developing a technique to characterize basaltic flow type, sub-meter roughness, and sediment mantling from these data. We will present the results from upcoming fieldwork at Craters of the Moon National Monument and Preserve with FINESSE (August) and at Hawai'i Volcanoes National Park (September). We build on earlier work that showed that basaltic flow margins are approximately fractal [Bruno et al., 1992; Gaonac'h et al., 1992] and that their fractal dimensions (D) have distinct `a`ā and pāhoehoe ranges under simple conditions [Bruno et al., 1994]. Using a differential GPS rover, we have recently shown that the margin of Iceland's 2014 Holuhraun flow exhibits near-perfect (R2=0.9998) fractality for ≥24 km across dm to km scales [Schaefer et al., 2016]. This finding suggests that a fractal-based technique has significant potential to characterize flows at sub-resolution scales. We are simultaneously seeking to understand how margin fractality can be modified. A preliminary result for an `a'ā flow in Hawaii's Ka'ū Desert suggests that although aeolian mantling obscures the original flow margin, the apparent margin (i.e., sediment-lava interface) remains fractal [Schaefer et al., 2015]. Further, the apparent margin's D is likely significantly modified from that of the original margin. Other factors that we are exploring include erosion, transitional flow types, and topographic confinement. We will also rigorously test the intriguing possibility that margin D correlates with the sub-meter Hurst exponent H of the flow surface, a common metric of roughness scaling [e.g., Shepard et al., 2001]. This hypothesis is based on geometric arguments [Turcotte, 1997] and is qualitatively consistent with all results so far.

Consideration of margins for hypo fractionated radiotherapy

International Nuclear Information System (INIS)

Herschtal, A.; Foroudi, F.; Kron, T.

2010-01-01

Full text: Geographical misses of the tumour are of concern in radiotherapy and are typically accommodated by introducing margins around the target. However, there is a trade-off between ensuring the target receives sufficient dose and minimising the dose to surrounding normal structures. Several methods of determining margin width have been developed with the most commonly used one proposed by M. VanHerk (VanHerk UROBP 52: 1407, 2002). VanHerk's model sets margins to achieve 95% of dose coverage for the target in 90% of patients. However, this model was derived assuming an infinite number of fractions. The aim of the present work is to estimate the modifications necessary to the model if a finite number of fractions are given. Software simulations were used to determine the true probability of a patient achieving 95% target coverage if different fraction numbers are used for a given margin width. Model parameters were informed by a large data set recently acquired at our institution using daily image guidance for prostate cancer patients with implanted fiducial markers. Assuming a 3 mm penumbral width it was found that using the VanHerk model only 74 or 54% of patients receive 95% of the prescription dose if 20 or 6 fractions are given, respectively. The steep dose gradients afforded by IMRT are likely to make consideration of the effects of hypofractionation more important. It is necessary to increase the margins around the target to ensure adequate tumour coverage if hypofractionated radiotherapy is to be used for cancer treatment. (author)

Marginal greenhouse gas emissions displacement of wind power in Great Britain

International Nuclear Information System (INIS)

Thomson, R. Camilla; Harrison, Gareth P.; Chick, John P.

2017-01-01

There is considerable uncertainty over the effect of wind power on the operation of power systems, and the consequent greenhouse gas (GHG) emissions displacement; this is used to project emissions reductions that inform energy policy. Currently, it is approximated as the average emissions of the whole system, despite an acknowledgement that wind will actually displace only the generators operating on the margin. This article presents a methodology to isolate the marginal emissions displacement of wind power from historical empirical data, taking into account the impact on the operating efficiency of coal and CCGT plants. For Great Britain over 2009–2014, it was found that marginal emissions displacement has generally been underestimated with, for example, the emissions displacement factor for wind being 21% higher than that the average emissions factor in 2010. The actual displacement depends upon the relative merit of coal and CCGT, with a greater discrepancy between marginal displacement and average emissions during more normal system operation, suggesting that policies to penalise high-carbon generation can increase the effectiveness of wind at reducing GHG emissions. Furthermore, it was also identified that wind power is almost as technically effective as demand-side reductions at decreasing GHG emissions from power generation. - Highlights: • Marginal emissions displacement was calculated from operational data for 2009–2014. • Existing estimates of emissions displacement are generally low. • Emissions displacement is a function of the relative merit of coal and CCGT plants. • Policies to penalise high-carbon generation should increase emissions displacement. • Wind almost as effective as demand-reduction at reducing emissions.

“Santísima Muerte, Vístete de Negro, Santísima Muerte, Vístete de Blanco”: La Santa Muerte’s Illegal Marginalizations

Directory of Open Access Journals (Sweden)

Desirée A. Martín

2017-03-01

Full Text Available La Santísima Muerte, the death saint patron of the marginalized and dispossessed in Mexico, the United States, and beyond, is especially favored by devotees who identify with her duality between dark and light, and good and evil. Most of Santa Muerte’s devotees understand that good and evil coexist in her, and they often simultaneously appeal to both. At the same time, illegality and marginalization, which are generally associated with the saint’s “dark” or “evil” sides, take on multiple, diverse forms, encompassing criminalized activity such as narcotrafficking, religious transgressions that reflect unorthodox spiritual practices such as witchcraft, and most contentiously of all, the very conditions of poverty and racialization in Mexico. Nevertheless, cultural representations of Santa Muerte often resist such diversity and persist in opposing her dark and light sides. Films such as Eva Aridjis’s La Santa Muerte and Pável Valenzuela Arámburo’s La Santísima Muerte aim to represent all Santa Muerte in all of her multiplicity and to correct stereotypical representations of the death saint in general. But perhaps inadvertently, Aridjis’s film reinforces the contrast, rather than the intersections, between “light” and “dark”. However, in La Santísima Muerte, Valenzuela Arámburo deliberately embraces the saint’s contradictory duality to provide a different perspective on illegality and criminality, simultaneously accepting such illegality as a dark menace in the vein of Santa Muerte’s typical detractors, and rearticulating it as a necessary aspect of the saint’s holy works. Valenzuela Arámburo’s film not only emphasizes that the very same devotees invoke Santa Muerte for her powers of “good” as well as for those of “evil”, it demonstrates that these devotees incorporate the saint’s dark side as they see fit not as a consequence of their marginalized status, but as a means to resist it. Thus, while

Splenic marginal zone lymphoma.

Science.gov (United States)

Piris, Miguel A; Onaindía, Arantza; Mollejo, Manuela

Splenic marginal zone lymphoma (SMZL) is an indolent small B-cell lymphoma involving the spleen and bone marrow characterized by a micronodular tumoral infiltration that replaces the preexisting lymphoid follicles and shows marginal zone differentiation as a distinctive finding. SMZL cases are characterized by prominent splenomegaly and bone marrow and peripheral blood infiltration. Cells in peripheral blood show a villous cytology. Bone marrow and peripheral blood characteristic features usually allow a diagnosis of SMZL to be performed. Mutational spectrum of SMZL identifies specific findings, such as 7q loss and NOTCH2 and KLF2 mutations, both genes related with marginal zone differentiation. There is a striking clinical variability in SMZL cases, dependent of the tumoral load and performance status. Specific molecular markers such as 7q loss, p53 loss/mutation, NOTCH2 and KLF2 mutations have been found to be associated with the clinical variability. Distinction from Monoclonal B-cell lymphocytosis with marginal zone phenotype is still an open issue that requires identification of precise and specific thresholds with clinical meaning. Copyright © 2016 Elsevier Ltd. All rights reserved.

The effect of repeated preheating of dimethacrylate and silorane-based composite resins on marginal gap of class V restorations.

Science.gov (United States)

Alizadeh Oskoee, Parnian; Pournaghi Azar, Fatemeh; Jafari Navimipour, Elmira; Ebrahimi Chaharom, Mohammad Esmaeel; Naser Alavi, Fereshteh; Salari, Ashkan

2017-01-01

Background. One of the problems with composite resin restorations is gap formation at resin‒tooth interface. The present study evaluated the effect of preheating cycles of silorane- and dimethacrylate-based composite resins on gap formation at the gingival margins of Class V restorations. Methods. In this in vitro study, standard Class V cavities were prepared on the buccal surfaces of 48 bovine incisors. For restorative procedure, the samples were randomly divided into 2 groups based on the type of composite resin (group 1: di-methacrylate composite [Filtek Z250]; group 2: silorane composite [Filtek P90]) and each group was randomly divided into 2 subgroups based on the composite temperature (A: room temperature; B: after 40 preheating cycles up to 55°C). Marginal gaps were measured using a stereomicroscope at ×40 and analyzed with two-way ANOVA. Inter- and intra-group comparisons were analyzed with post-hoc Tukey tests. Significance level was defined at P composite resin type, preheating and interactive effect of these variables on gap formation were significant (Pcomposite resins (Pcomposite resins at room temperature compared to composite resins after 40 preheating cycles (Pcomposite re-sins. Preheating of silorane-based composites can result in the best marginal adaptation.

Categorical marginal models: quite extensive package for the estimation of marginal models for categorical data

OpenAIRE

Wicher Bergsma; Andries van der Ark

2015-01-01

A package accompanying the book Marginal Models for Dependent, Clustered, and Longitudinal Categorical Data by Bergsma, Croon, & Hagenaars, 2009. It’s purpose is fitting and testing of marginal models.

Characterizing Convexity of Games using Marginal Vectors

NARCIS (Netherlands)

van Velzen, S.; Hamers, H.J.M.; Norde, H.W.

2003-01-01

In this paper we study the relation between convexity of TU games and marginal vectors.We show that if specfic marginal vectors are core elements, then the game is convex.We characterize sets of marginal vectors satisfying this property, and we derive the formula for the minimum number of marginal

Roots of inequity

DEFF Research Database (Denmark)

Chomba, Susan Wangui; Kariuki, Juliet; Lund, Jens Friis

2016-01-01

policy of the project maps onto the existing unequal land distribution, it reinforces inequality. By illustrating how current, well-intended, REDD+ efforts inadvertently come to entrench a long process of dispossession of marginalized people, we call attention to the pivotal importance that historical...

12 CFR 220.4 - Margin account.

Science.gov (United States)

2010-01-01

... Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM CREDIT BY... securities. The required margin on a net long or net short commitment in a when-issued security is the margin...) Interest charged on credit maintained in the margin account; (ii) Premiums on securities borrowed in...

Conference Report: The New Discovery of Margins: Theory-Based Excursions in Marginal Social Fields

Directory of Open Access Journals (Sweden)

Babette Kirchner

2014-05-01

Full Text Available At this year's spring conference of the Sociology of Knowledge Section of the German Sociological Association, a diverse range of theoretical concepts and multiple empirical insights into different marginal social fields were presented. As in everyday life, drawing a line between center and margin can be seen as an important challenge that must equally be faced in sociology. The socially constructed borderline appears to be highly variable. Therefore it has to be delineated or fixed somehow. The construction of margins is necessary for society in general and smaller social groupings alike to confirm one's own "normal" identity, or one's own membership on the fringes. The different contributions exemplify what was established at the beginning of the conference: Namely that society and its margins are defined differently according to the empirical as well as conceptual focus. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1402148

Perlindungan Hukum Dalam Transaksi Margin Trading Dan Short Sales Di Pasar Modal

OpenAIRE

Kiandi, Ferry

2015-01-01

In the world of capital markets, there are many facilities offered by the securities, among other things, are margin trading and short selling. Margin trading is one of the facilities provided by the brokerage firm to investors. In margin trading, securuties (effects) purchase transactions made by the customers are financed by securities companies. So the investor can make the transaction exceeding the amount of money he has. In this facility, investors do not have to return th...

Effect of Blood Contamination on Marginal Adaptation and Surface Microstructure of Mineral Trioxide Aggregate: A SEM Study

Directory of Open Access Journals (Sweden)

Amin Salem Milani

2013-08-01

Full Text Available Background and aims. In various clinical situations, mineral trioxide aggregate (MTA may come into direct contact or even be mixed with blood. The aim of the present study was to evaluate the effect of exposure to blood on marginal adaptation and surface microstructure of MTA. Materials and methods. Thirty extracted human single-rooted teeth were used. Standard root canal treatment was carried out. Root-ends were resected, and retrocavities were prepared. The teeth were randomly divided into two groups (n = 15: in group 1, the internal surface of the cavities was coated with fresh blood. Then, the cavities were filled with MTA. The roots were immersed in molds containing fresh blood. In group 2, the aforementioned procedures were performed except that synthetic tissue fluid (STF was used instead of blood. To assess the marginal adaptation, “gap perimeter” and “maximum gap width” were measured under scanning electron microscope. The surface microstructure was also examined. Independent samples t-test and Mann-Whitney U test were used to analyze the data. Results. Maximum gap width and gap perimeter in the blood-exposed group were significantly larger than those in the STF-exposed group (p < 0.01. In the blood-exposed group, the crystals tended to be more rounded and less angular compared with the STF-exposed group, and there was a general lack of needle-like crystals. Conclusion. Exposure to blood during setting has a negative effect on marginal adaptation of MTA, and blood-exposed MTA has a different surface microstructure compared to STF-exposed MTA.

Rotor Design Options for Improving XV-15 Whirl-Flutter Stability Margins

Science.gov (United States)

Acree, C. W., Jr.; Peyran, R. J.; Johnson, Wayne

2004-01-01

Rotor design changes intended to improve tiltrotor whirl-flutter stability margins were analyzed. A baseline analytical model of the XV-15 was established, and then a thinner, composite wing was designed to be representative of a high-speed tiltrotor. The rotor blade design was modified to increase the stability speed margin for the thin-wing design. Small rearward offsets of the aerodynamic-center locus with respect to the blade elastic axis created large increases in the stability boundary. The effect was strongest for offsets at the outboard part of the blade, where an offset of the aerodynamic center by 10% of tip chord improved the stability margin by over 100 knots. Forward offsets of the blade center of gravity had similar but less pronounced effects. Equivalent results were seen for swept-tip blades. Appropriate combinations of sweep and pitch stiffness completely eliminated whirl flutter within the speed range examined; alternatively, they allowed large increases in pitch-flap coupling (delta-three) for a given stability margin. A limited investigation of the rotor loads in helicopter and airplane configuration showed only minor increases in loads.

Biological impact of geometric uncertainties: what margin is needed for intra-hepatic tumors?

International Nuclear Information System (INIS)

Kuo, Hsiang-Chi; Liu, Wen-Shan; Wu, Andrew; Mah, Dennis; Chuang, Keh-Shih; Hong, Linda; Yaparpalvi, Ravi; Guha, Chandan; Kalnicki, Shalom

2010-01-01

To evaluate and compare the biological impact on different proposed margin recipes for the same geometric uncertainties for intra-hepatic tumors with different tumor cell types or clinical stages. Three different margin recipes based on tumor motion were applied to sixteen IMRT plans with a total of twenty two intra-hepatic tumors. One recipe used the full amplitude of motion measured from patients to generate margins. A second used 70% of the full amplitude of motion, while the third had no margin for motion. The biological effects of geometric uncertainty in these three situations were evaluated with Equivalent Uniform Doses (EUD) for various survival fractions at 2 Gy (SF 2 ). There was no significant difference in the biological impact between the full motion margin and the 70% motion margin. Also, there was no significant difference between different tumor cell types. When the margin for motion was eliminated, the difference of the biological impact was significant among different cell types due to geometric uncertainties. Elimination of the motion margin requires dose escalation to compensate for the biological dose reduction due to the geometric misses during treatment. Both patient-based margins of full motion and of 70% motion are sufficient to prevent serious dosimetric error. Clinical implementation of margin reduction should consider the tumor sensitivity to radiation

NRC Seismic Design Margins Program Plan

International Nuclear Information System (INIS)

Cummings, G.E.; Johnson, J.J.; Budnitz, R.J.

1985-08-01

Recent studies estimate that seismically induced core melt comes mainly from earthquakes in the peak ground acceleration range from 2 to 4 times the safe shutdown earthquake (SSE) acceleration used in plant design. However, from the licensing perspective of the US Nuclear Regulatory Commission, there is a continuing need for consideration of the inherent quantitative seismic margins because of, among other things, the changing perceptions of the seismic hazard. This paper discusses a Seismic Design Margins Program Plan, developed under the auspices of the US NRC, that provides the technical basis for assessing the significance of design margins in terms of overall plant safety. The Plan will also identify potential weaknesses that might have to be addressed, and will recommend technical methods for assessing margins at existing plants. For the purposes of this program, a general definition of seismic design margin is expressed in terms of how much larger that the design basis earthquake an earthquake must be to compromise plant safety. In this context, margin needs to be determined at the plant, system/function, structure, and component levels. 14 refs., 1 fig

The marginal band system in nymphalid butterfly wings.

Science.gov (United States)

Taira, Wataru; Kinjo, Seira; Otaki, Joji M

2015-01-01

Butterfly wing color patterns are highly complex and diverse, but they are believed to be derived from the nymphalid groundplan, which is composed of several color pattern systems. Among these pattern systems, the marginal band system, including marginal and submarginal bands, has rarely been studied. Here, we examined the color pattern diversity of the marginal band system among nymphalid butterflies. Marginal and submarginal bands are usually expressed as a pair of linear bands aligned with the wing margin. However, a submarginal band can be expressed as a broken band, an elongated oval, or a single dot. The marginal focus, usually a white dot at the middle of a wing compartment along the wing edge, corresponds to the pupal edge spot, one of the pupal cuticle spots that signify the locations of color pattern organizing centers. A marginal band can be expressed as a semicircle, an elongated oval, or a pair of eyespot-like structures, which suggest the organizing activity of the marginal focus. Physical damage at the pupal edge spot leads to distal dislocation of the submarginal band in Junonia almana and in Vanessa indica, suggesting that the marginal focus functions as an organizing center for the marginal band system. Taken together, we conclude that the marginal band system is developmentally equivalent to other symmetry systems. Additionally, the marginal band is likely a core element and the submarginal band a paracore element of the marginal band system, and both bands are primarily specified by the marginal focus organizing center.

Passive target tracking using marginalized particle filter

Institute of Scientific and Technical Information of China (English)

无

2007-01-01

A marginalized particle filtering(MPF)approach is proposed for target tracking under the background of passive measurement.Essentially,the MPF is a combination of particle filtering technique and Kalman filter.By making full use of marginalization,the distributions of the tractable linear part of the total state variables are updated analytically using Kalman filter,and only the lower-dimensional nonlinear state variable needs to be dealt with using particle filter.Simulation studies are performed on an illustrative example,and the results show that the MPF method leads to a significant reduction of the tracking errors when compared with the direct particle implementation.Real data test results also validate the effectiveness of the presented method.

Seismic margin analysis technique for nuclear power plant structures

International Nuclear Information System (INIS)

Seo, Jeong Moon; Choi, In Kil

2001-04-01

In general, the Seismic Probabilistic Risk Assessment (SPRA) and the Seismic Margin Assessment(SAM) are used for the evaluation of realistic seismic capacity of nuclear power plant structures. Seismic PRA is a systematic process to evaluate the seismic safety of nuclear power plant. In our country, SPRA has been used to perform the probabilistic safety assessment for the earthquake event. SMA is a simple and cost effective manner to quantify the seismic margin of individual structural elements. This study was performed to improve the reliability of SMA results and to confirm the assessment procedure. To achieve this goal, review for the current status of the techniques and procedures was performed. Two methodologies, CDFM (Conservative Deterministic Failure Margin) sponsored by NRC and FA (Fragility Analysis) sponsored by EPRI, were developed for the seismic margin review of NPP structures. FA method was originally developed for Seismic PRA. CDFM approach is more amenable to use by experienced design engineers including utility staff design engineers. In this study, detailed review on the procedures of CDFM and FA methodology was performed

Geophysical constraints on geodynamical processes at convergent margins

DEFF Research Database (Denmark)

Artemieva, Irina; Thybo, Hans; Shulgin, Alexey

2016-01-01

Convergent margins, being the boundaries between colliding lithospheric plates, form the most disastrous areas in the world due to intensive, strong seismicity and volcanism. We review global geophysical data in order to illustrate the effects of the plate tectonic processes at convergent margins......, at least, one of the plates is oceanic. However, the oldest oceanic plate in the Pacific ocean has the smallest convergence rate. (2) The presence of an oceanic plate is, in general, required for generation of high-magnitude (M>8.0) earthquakes and for generating intermediate and deep seismicity along...... to shallow mantle levels....

Marginal Congestion Cost on a Dynamic Expressway Network

DEFF Research Database (Denmark)

Fosgerau, Mogens; Small, Kenneth A.

2012-01-01

a dynamic econometric model using unusually complete and accurate data from Danish motorways. We use the results to estimate the marginal external cost of adding a vehicle to a link's entry flow, finding it is highly influenced by the dynamic properties of the system of relationships between travel times......We formulate an empirical model of congestion for a series of sequential expressway links where queues may form and spill back. Its purpose is to disentangle the dynamic effect that a marginal vehicle has on the distribution of travel times experienced there and on connected links. We estimate...

Assessment of seismic margin calculation methods

International Nuclear Information System (INIS)

Kennedy, R.P.; Murray, R.C.; Ravindra, M.K.; Reed, J.W.; Stevenson, J.D.

1989-03-01

Seismic margin review of nuclear power plants requires that the High Confidence of Low Probability of Failure (HCLPF) capacity be calculated for certain components. The candidate methods for calculating the HCLPF capacity as recommended by the Expert Panel on Quantification of Seismic Margins are the Conservative Deterministic Failure Margin (CDFM) method and the Fragility Analysis (FA) method. The present study evaluated these two methods using some representative components in order to provide further guidance in conducting seismic margin reviews. It is concluded that either of the two methods could be used for calculating HCLPF capacities. 21 refs., 9 figs., 6 tabs

MARGINS: Toward a novel science plan

Science.gov (United States)

Mutter, John C.

A science plan to study continental margins has been in the works for the past 3 years, with almost 200 Earth scientists from a wide variety of disciplines gathering at meetings and workshops. Most geological hazards and resources are found at continental margins, yet our understanding of the processes that shape the margins is meager.In formulating this MARGINS research initiative, fundamental issues concerning our understanding of basic Earth-forming processes have arisen. It is clear that a business-as-usual approach will not solve the class of problems defined by the MARGINS program; the solutions demand approaches different from those used in the past. In many cases, a different class of experiment will be required, one that is well beyond the capability of individual principle investigators to undertake on their own. In most cases, broadly based interdisciplinary studies will be needed.

Pricing district heating by marginal cost

International Nuclear Information System (INIS)

Difs, Kristina; Trygg, Louise

2009-01-01

A vital measure for industries when redirecting the energy systems towards sustainability is conversion from electricity to district heating (DH). This conversion can be achieved for example, by replacing electrical heating with DH and compression cooling with heat-driven absorption cooling. Conversion to DH must, however, always be an economically attractive choice for an industry. In this paper the effects for industries and the local DH supplier are analysed when pricing DH by marginal cost in combination with industrial energy efficiency measures. Energy audits have shown that the analysed industries can reduce their annual electricity use by 30% and increase the use of DH by 56%. When marginal costs are applied as DH tariffs and the industrial energy efficiency measures are implemented, the industrial energy costs can be reduced by 17%. When implementing the industrial energy efficiency measures and also considering a utility investment in the local energy system, the local DH supplier has a potential to reduce the total energy system cost by 1.6 million EUR. Global carbon dioxide emissions can be reduced by 25,000 tonnes if the industrial energy efficiency measures are implemented and when coal-condensing power is assumed to be the marginal electricity source

Reliabilityy and operating margins of LWR fuels

International Nuclear Information System (INIS)

Strasser, A.A.; Lindquist, K.O.

1977-01-01

The margins to fuel thermal operating limits under normal and accident conditions are key to plant operating flexibility and impact on availability and capacity factor. Fuel performance problems that do not result in clad breach, can reduce these margins. However, most have or can be solved with design changes. Regulatory changes have been major factors in eroding these margins. Various methods for regaining the margins are discussed

Effective collaboration between marginal metallophilic macrophages and CD8+ dendritic cells in the generation of cytotoxic T cells

Science.gov (United States)

Backer, Ronald; Schwandt, Timo; Greuter, Mascha; Oosting, Marije; Jüngerkes, Frank; Tüting, Thomas; Boon, Louis; O’Toole, Tom; Kraal, Georg; Limmer, Andreas; den Haan, Joke M. M.

2009-01-01

The spleen is the lymphoid organ that induces immune responses toward blood-borne pathogens. Specialized macrophages in the splenic marginal zone are strategically positioned to phagocytose pathogens and cell debris, but are not known to play a role in the activation of T-cell responses. Here we demonstrate that splenic marginal metallophilic macrophages (MMM) are essential for cross-presentation of blood-borne antigens by splenic dendritic cells (DCs). Our data demonstrate that antigens targeted to MMM as well as blood-borne adenoviruses are efficiently captured by MMM and exclusively transferred to splenic CD8+ DCs for cross-presentation and for the activation of cytotoxic T lymphocytes. Depletion of macrophages in the marginal zone prevents cytotoxic T-lymphocyte activation by CD8+ DCs after antibody targeting or adenovirus infection. Moreover, we show that tumor antigen targeting to MMM is very effective as antitumor immunotherapy. Our studies point to an important role for splenic MMM in the initial steps of CD8+ T-cell immunity by capturing and concentrating blood-borne antigens and the transfer to cross-presenting DCs which can be used to design vaccination strategies to induce antitumor cytotoxic T-cell immunity. PMID:20018690

Wavelet Filtering to Reduce Conservatism in Aeroservoelastic Robust Stability Margins

Science.gov (United States)

Brenner, Marty; Lind, Rick

1998-01-01

Wavelet analysis for filtering and system identification was used to improve the estimation of aeroservoelastic stability margins. The conservatism of the robust stability margins was reduced with parametric and nonparametric time-frequency analysis of flight data in the model validation process. Nonparametric wavelet processing of data was used to reduce the effects of external desirableness and unmodeled dynamics. Parametric estimates of modal stability were also extracted using the wavelet transform. Computation of robust stability margins for stability boundary prediction depends on uncertainty descriptions derived from the data for model validation. F-18 high Alpha Research Vehicle aeroservoelastic flight test data demonstrated improved robust stability prediction by extension of the stability boundary beyond the flight regime.

Marginal adaptation of four inlay casting waxes on stone, titanium, and zirconia dies.

Science.gov (United States)

Michalakis, Konstantinos X; Kapsampeli, Vassiliki; Kitsou, Aikaterini; Kirmanidou, Yvone; Fotiou, Anna; Pissiotis, Argirios L; Calvani, Pasquale Lino; Hirayama, Hiroshi; Kudara, Yukio

2014-07-01

Different inlay casting waxes do not produce copings with satisfactory marginal accuracy when used on different die materials. The purpose of this study was to evaluate the marginal accuracy of 4 inlay casting waxes on stone dies and titanium and zirconia abutments and to correlate the findings with the degree of wetting between the die specimens and the inlay casting waxes. The inlay casting waxes tested were Starwax (Dentaurum), Unterziehwachs (Bredent), SU Esthetic wax (Schuler), and Sculpturing wax (Renfert). The marginal opening of the waxes was measured with a stereomicroscope on high-strength stone dies and on titanium and zirconia abutments. Photographic images were obtained, and the mean marginal opening for each specimen was calculated. A total of 1440 measurements were made. Wetting between die materials and waxes was determined after fabricating stone, titanium, and zirconia rectangular specimens. A calibrated pipette was used to place a drop of molten wax onto each specimen. The contact angle was calculated with software after an image of each specimen had been made with a digital camera. Collected data were subjected to a 2-way analysis of variance (α=.05). Any association between marginal accuracy and wetting of different materials was found by using the Pearson correlation. The wax factor had a statistically significant effect both on the marginal discrepancy (F=158.31, P<.001) and contact angle values (F=68.09, P<.001). A statistically significant effect of the die material factor both on the marginal adaptation (F=503.47, P<.001) and contact angle values (F=585.02, P<.001) was detected. A significant correlation between the marginal accuracy and the contact angle values (Pearson=0.881, P=.01) was also found. Stone dies provided wax copings with the best marginal integrity, followed by titanium and zirconia abutments. Unterziehwachs (Bredent), wax produced the best marginal adaptation on different die materials. A significant correlation was found

New Insights into Passive Margin Development from a Global Deep Seismic Reflection Dataset

Science.gov (United States)

Bellingham, Paul; Pindell, James; Graham, Rod; Horn, Brian

2014-05-01

The kinematic and dynamic evolution of the world's passive margins is still poorly understood. Yet the need to replace reserves, a high oil price and advances in drilling technology have pushed the international oil and gas industry to explore in the deep and ultra-deep waters of the continental margins. To support this exploration and help understand these margins, ION-GXT has acquired, processed and interpreted BasinSPAN surveys across many of the world's passive margins. Observations from these data lead us to consider the modes of subsidence and uplift at both volcanic and non-volcanic margins. At non-volcanic margins, it appears that frequently much of the subsidence post-dates major rifting and is not thermal in origin. Rather the subsidence is associated with extensional displacement on a major fault or shear zone running at least as deep as the continental Moho. We believe that the subsidence is structural and is probably associated with the pinching out (boudinage) of the Lower Crust so that the Upper crust effectively collapses onto the mantle. Eventually this will lead to the exhumation of the sub-continental mantle at the sea bed. Volcanic margins present more complex challenges both in terms of imaging and interpretation. The addition of volcanic and plutonic material into the system and dynamic effects all impact subsidence and uplift. However, we will show some fundamental observations regarding the kinematic development of volcanic margins and especially SDRs which demonstate that the process of collapse and the development of shear zones within and below the crust are also in existence at this type of margin. A model is presented of 'magma welds' whereby packages of SDRs collapse onto an emerging sub-crustal shear zone and it is this collapse which creates the commonly observed SDR geometry. Examples will be shown from East India, Newfoundland, Brazil, Argentina and the Gulf of Mexico.

Effects of Pulsating Flow on Mass Flow Balance and Surge Margin in Parallel Turbocharged Engines

OpenAIRE

Thomasson, Andreas; Eriksson, Lars

2015-01-01

The paper extends a mean value model of a parallel turbocharged internal combustion engine with a crank angle resolved cylinder model. The result is a 0D engine model that includes the pulsating flow from the intake and exhaust valves. The model captures variations in turbo speed and pressure, and therefore variations in the compressor operating point, during an engine cycle. The model is used to study the effect of the pulsating flow on mass flow balance and surge margin in parallel turbocha...

Marginal cost application in the power industry

International Nuclear Information System (INIS)

Twardy, L.; Rusak, H.

1994-01-01

Two kind of marginal costs, the short-run and the long-run, are defined. The former are applied in conditions when the load increase is not accompanied neither by the increase of the transmission capacity not the installed capacity while the latter assume new investments to expand the power system. The long-run marginal costs be used to forecast optimized development of the system. They contain two main components: the marginal costs of capacity and the marginal costs of energy. When the long-run marginal costs are calculated, each component is considered for particular voltage levels, seasons of the year, hours of the day - selected depending on the system reliability factor as well as on its load level. In the market economy countries the long-run marginal costs can be used for setting up the electric energy tariffs. (author). 7 refs, 11 figs

Effect of tightening torque on the marginal adaptation of cement-retained implant-supported fixed dental prostheses

Directory of Open Access Journals (Sweden)

Jalil Ghanbarzadeh

2015-01-01

Conclusion: Within the limitations of this study, the marginal misfit of cement-retained FDPs increased continuously when the tightening torque increased. After cutting the connectors, the marginal misfit of the ANRs was higher than those of the straight abutment retainers.

Effect of casting atmosphere on the marginal deficiency and misfit of Ni-Cr alloys with and without beryllium.

Science.gov (United States)

da Silva, Leandro J; Leal, Monica B; Valente, Mariana L C; de Castro, Denise T; Pagnano, Valéria O; Dos Reis, Andréa C; Bezzon, Osvaldo L

2017-07-01

The marginal adaptation of prosthetic crowns is still a significant clinical problem. The purpose of this in vitro study was to evaluate the marginal deficiency and misfit of Ni-Cr alloys with and without beryllium under different casting conditions. Four casting conditions were selected: flame-torch, induction/argon, induction/vacuum, and induction/air; and 2 alloys were used, Ni-Cr-Be and Ni-Cr. For each group, 10 metal specimens were prepared. Silicone indirect impressions and analysis of the degree of rounding were used to evaluate the marginal deficiencies of metal copings, and a standardized device for the setting pressure associated with optical microscopy was used to analyze the marginal misfit. Results were evaluated with 2-way ANOVA (α=.05), followed by the Tukey honest significant difference post hoc test, and the Pearson correlation test (α=.05). Alloy (Pcasting technique (Pcast using the torch technique showed the highest marginal deficiency, and the Ni-Cr-Be cast in a controlled argon atmosphere showed the lowest (Pcasting techniques (P=.206) did not affect the marginal misfit, but significant differences were found in the interaction (P=.001); the lowest misfit was achieved using the Ni-Cr-Be, and the highest misfit occurred with the molten Ni-Cr, using the cast torch technique. No correlation was found between deficiency and marginal misfit (r=.04, P=.69). The interactions demonstrated that the alloy containing beryllium that was cast in an argon atmosphere led to reduced marginal deficiency. Improved marginal adaptation can be achieved for the same alloy by using the torch technique. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Workers' marginal costs of commuting

DEFF Research Database (Denmark)

van Ommeren, Jos; Fosgerau, Mogens

2009-01-01

This paper applies a dynamic search model to estimate workers' marginal costs of commuting, including monetary and time costs. Using data on workers' job search activity as well as moving behaviour, for the Netherlands, we provide evidence that, on average, workers' marginal costs of one hour...

Pathology of nodal marginal zone lymphomas.

Science.gov (United States)

Pileri, Stefano; Ponzoni, Maurilio

Nodal marginal zone B cell lymphomas (NMZLs) are a rare group of lymphoid disorders part of the spectrum of marginal zone B-cell lymphomas, which encompass splenic marginal one B-cell lymphoma (SMZL) and extra nodal marginal zone of B-cell lymphoma (EMZL), often of MALT-type. Two clinicopathological forms of NMZL are recognized: adult-type and pediatric-type, respectively. NMZLs show overlapping features with other types of MZ, but distinctive features as well. In this review, we will focus on the salient distinguishing features of NMZL mostly under morphological/immunophenotypical/molecular perspectives in views of the recent acquisitions and forthcoming updated 2016 WHO classification of lymphoid malignancies. Copyright © 2016 Elsevier Ltd. All rights reserved.

Marginal Fit Comparison of CAD/CAM Crowns Milled from Two Different Materials.

Science.gov (United States)

Azarbal, Atousa; Azarbal, Mohsen; Engelmeier, Robert L; Kunkel, Thomas C

2017-11-16

To evaluate the marginal fit of CAD/CAM copings milled from hybrid ceramic (Vita Enamic) blocks and lithium disilicate (IPS e.max CAD) blocks, and to evaluate the effect of crystallization firing on the marginal fit of lithium disilicate copings. A standardized metal die with a 1-mm-wide shoulder finish line was imaged using the CEREC AC Bluecam. The coping was designed using CEREC 3 software. The design was used to fabricate 15 lithium disilicate and 15 hybrid ceramic copings. Design and milling were accomplished by one operator. The copings were seated on the metal die using a pressure clamp with a uniform pressure of 5.5 lbs. A Macroview Microscope (14×) was used for direct viewing of the marginal gap. Four areas were imaged on each coping (buccal, distal, lingual, mesial). Image analysis software was used to measure the marginal gaps in μm at 15 randomly selected points on each of the four surfaces. A total of 60 measurements were made per specimen. For lithium disilicate copings the measurements for marginal gap were made before and after crystallization firing. Data were analyzed using paired t-test and Kruskal-Wallis test. The overall mean difference in marginal gap between the hybrid ceramic and crystallized lithium disilicate copings was statistically significant (p marginal gaps were measured for crystallized lithium disilicate copings. The overall mean difference in marginal gap before and after firing (precrystallized and crystallized lithium disilicate copings) showed an average of 62 μm increase in marginal gap after firing. This difference was also significant (p marginal gap discrepancy when comparing hybrid ceramic and lithium disilicate CAD/CAM crowns. Also crystallization firing can result in a significant increase in the marginal gap of lithium disilicate CAD/CAM crowns. © 2017 by the American College of Prosthodontists.

The Effect of Casting Ring Liner Length and Prewetting on the Marginal Adaptation and Dimensional Accuracy of Full Crown Castings.

Science.gov (United States)

Haralur, Satheesh B; Hamdi, Osama A; Al-Shahrani, Abdulaziz A; Alhasaniah, Sultan

2017-01-01

To evaluate the effect of varying cellulose casting ring liner length and its prewetting on the marginal adaptation and dimensional accuracy of full veneer metal castings. The master die was milled in stainless steel to fabricate the wax pattern. Sixty wax patterns were fabricated with a uniform thickness of 1.5 mm at an occlusal surface and 1 mm axial surface, cervical width at 13.5 mm, and 10 mm cuspal height. The samples were divided into six groups ( n = 10). Groups I and II samples had the full-length cellulose prewet and dry ring liner, respectively. The groups III and IV had 2 mm short prewet and dry cellulose ring liner, respectively, whereas groups V and VI were invested in 6 mm short ring liner. The wax patterns were immediately invested in phosphate bonded investment, and casting procedure was completed with nickel-chrome alloy. The castings were cleaned and mean score of measurements at four reference points for marginal adaption, casting height, and cervical width was calculated. The marginal adaption was calculated with Imaje J software, whereas the casting height and cervical width was determined using a digital scale. The data was subjected to one-way analysis of varaince and Tukey post hoc statistical analysis with Statistical Package for the Social Sciences version 20 software. The group II had the best marginal adaption with a gap of 63.786 μm followed by group I (65.185 μm), group IV (87.740 μm), and group III (101.455 μm). A large marginal gap was observed in group V at 188.871 μm. Cuspal height was more accurate with group V (10.428 mm), group VI (10.421 mm), and group II (10.488 mm). The cervical width was approximately similar in group I, group III, and group V. Statistically significant difference was observed in Tukey post hoc analysis between group V and group VI with all the other groups with regards to marginal adaptation. The dry cellulose ring liners provided better marginal adaptation in comparison to prewet cellulose ring

Experimental study and large eddy simulation of effect of terrain slope on marginal burning in shrub fuel beds

Science.gov (United States)

Xiangyang Zhou; Shankar Mahalingam; David Weise

2007-01-01

This paper presents a combined study of laboratory scale fire spread experiments and a three-dimensional large eddy simulation (LES) to analyze the effect of terrain slope on marginal burning behavior in live chaparral shrub fuel beds. Line fire was initiated in single species fuel beds of four common chaparral plants under various fuel bed configurations and ambient...

Read margin analysis of crossbar arrays using the cell-variability-aware simulation method

Science.gov (United States)

Sun, Wookyung; Choi, Sujin; Shin, Hyungsoon

2018-02-01

This paper proposes a new concept of read margin analysis of crossbar arrays using cell-variability-aware simulation. The size of the crossbar array should be considered to predict the read margin characteristic of the crossbar array because the read margin depends on the number of word lines and bit lines. However, an excessively high-CPU time is required to simulate large arrays using a commercial circuit simulator. A variability-aware MATLAB simulator that considers independent variability sources is developed to analyze the characteristics of the read margin according to the array size. The developed MATLAB simulator provides an effective method for reducing the simulation time while maintaining the accuracy of the read margin estimation in the crossbar array. The simulation is also highly efficient in analyzing the characteristic of the crossbar memory array considering the statistical variations in the cell characteristics.

Risk insights from seismic margin reviews

International Nuclear Information System (INIS)

Budnitz, R.J.

1990-01-01

This paper discusses the information that has been derived from the three seismic-margin reviews conducted so far, and the information that is potentially available from using the seismic-margin method more generally. There are two different methodologies for conducting seismic margin reviews of nuclear power plants, one developed under NRC sponsorship and one developed under sponsorship of the Electric Power Research Institute. Both methodologies will be covered in this paper. The paper begins with a summary of the steps necessary to complete a margin review, and will then outline the key technical difficulties that need to be addressed. After this introduction, the paper covers the safety and operational insights derived from the three seismic-margin reviews already completed: the NRC-sponsored review at Maine Yankee; the EPRI-sponsored review at Catawba; and the joint EPRI/NRC/utility effort at Hatch. The emphasis is on engineering insights, with attention to the aspects of the reviews that are easiest to perform and that provide the most readily available insights

Exactly marginal deformations from exceptional generalised geometry

Energy Technology Data Exchange (ETDEWEB)

Ashmore, Anthony [Merton College, University of Oxford,Merton Street, Oxford, OX1 4JD (United Kingdom); Mathematical Institute, University of Oxford,Andrew Wiles Building, Woodstock Road, Oxford, OX2 6GG (United Kingdom); Gabella, Maxime [Institute for Advanced Study,Einstein Drive, Princeton, NJ 08540 (United States); Graña, Mariana [Institut de Physique Théorique, CEA/Saclay,91191 Gif-sur-Yvette (France); Petrini, Michela [Sorbonne Université, UPMC Paris 05, UMR 7589, LPTHE,75005 Paris (France); Waldram, Daniel [Department of Physics, Imperial College London,Prince Consort Road, London, SW7 2AZ (United Kingdom)

2017-01-27

We apply exceptional generalised geometry to the study of exactly marginal deformations of N=1 SCFTs that are dual to generic AdS{sub 5} flux backgrounds in type IIB or eleven-dimensional supergravity. In the gauge theory, marginal deformations are parametrised by the space of chiral primary operators of conformal dimension three, while exactly marginal deformations correspond to quotienting this space by the complexified global symmetry group. We show how the supergravity analysis gives a geometric interpretation of the gauge theory results. The marginal deformations arise from deformations of generalised structures that solve moment maps for the generalised diffeomorphism group and have the correct charge under the generalised Reeb vector, generating the R-symmetry. If this is the only symmetry of the background, all marginal deformations are exactly marginal. If the background possesses extra isometries, there are obstructions that come from fixed points of the moment maps. The exactly marginal deformations are then given by a further quotient by these extra isometries. Our analysis holds for any N=2 AdS{sub 5} flux background. Focussing on the particular case of type IIB Sasaki-Einstein backgrounds we recover the result that marginal deformations correspond to perturbing the solution by three-form flux at first order. In various explicit examples, we show that our expression for the three-form flux matches those in the literature and the obstruction conditions match the one-loop beta functions of the dual SCFT.

RISK-INFORMED SAFETY MARGIN CHARACTERIZATION

International Nuclear Information System (INIS)

Dinh, Nam; Szilard, Ronaldo

2009-01-01

The concept of safety margins has served as a fundamental principle in the design and operation of commercial nuclear power plants (NPPs). Defined as the minimum distance between a system's 'loading' and its 'capacity', plant design and operation is predicated on ensuring an adequate safety margin for safety-significant parameters (e.g., fuel cladding temperature, containment pressure, etc.) is provided over the spectrum of anticipated plant operating, transient and accident conditions. To meet the anticipated challenges associated with extending the operational lifetimes of the current fleet of operating NPPs, the United States Department of Energy (USDOE), the Idaho National Laboratory (INL) and the Electric Power Research Institute (EPRI) have developed a collaboration to conduct coordinated research to identify and address the technological challenges and opportunities that likely would affect the safe and economic operation of the existing NPP fleet over the postulated long-term time horizons. In this paper we describe a framework for developing and implementing a Risk-Informed Safety Margin Characterization (RISMC) approach to evaluate and manage changes in plant safety margins over long time horizons

Safety margins associated with containment structures under dynamic loading

International Nuclear Information System (INIS)

Lu, S.C.

1978-01-01

A technical basis for assessing the true safety margins of containment structures involved with MARK I boiling water reactor reevaluation activities is presented. It is based on the results of a plane-strain, large displacement, elasto-plastic, finite-element analysis of a thin cylindrical shell subjected to external and internal pressure pulses. An analytical procedure is presented for estimating the ultimate load capacity of the thin shell structure, and subsequently, for quantifying the design margins of safety for the type of loads under consideration. For defining failure of structures, a finite strain failure criterion is derived that accounts for multiaxiality effects

Professional Commitment and Professional Marginalism in Teachers

Directory of Open Access Journals (Sweden)

Kalashnikov A.I.

2017-11-01

Full Text Available The article reviews teachers' attitudes towards the teaching profession which can be expressed both in professional commitment and in professional marginalism. The dominance of professional marginalism could affect destructively the students as well as the teacher’s personality, hence the issues related to the content of personal position of a marginal and the rate of marginalism among teachers. It was suggested that marginalism could be revealed in the study of professional commitment. The study involved 81 teachers of Sverdlovsk secondary schools aged 21—60 years with work experience ranging from 1 month to 39 years. The Professional Commitment Questionnaire was used as the study technique. The results showed that negative emotional attitude towards the profession and reluctance to leave the profession were grouped as a separate factor. The dispersion factor was 12,5%. The factor loadings ranged from 0.42 to 0.84. The study proved that professional marginalism in teachers includes dissatisfaction with work, feelings of resentment against profession and an unwillingness to leave the profession.

A quantitative analysis of transtensional margin width

Science.gov (United States)

Jeanniot, Ludovic; Buiter, Susanne J. H.

2018-06-01

Continental rifted margins show variations between a few hundred to almost a thousand kilometres in their conjugated widths from the relatively undisturbed continent to the oceanic crust. Analogue and numerical modelling results suggest that the conjugated width of rifted margins may have a relationship to their obliquity of divergence, with narrower margins occurring for higher obliquity. We here test this prediction by analysing the obliquity and rift width for 26 segments of transtensional conjugate rifted margins in the Atlantic and Indian Oceans. We use the plate reconstruction software GPlates (http://www.gplates.org) for different plate rotation models to estimate the direction and magnitude of rifting from the initial phases of continental rifting until breakup. Our rift width corresponds to the distance between the onshore maximum topography and the last identified continental crust. We find a weak positive correlation between the obliquity of rifting and rift width. Highly oblique margins are narrower than orthogonal margins, as expected from analogue and numerical models. We find no relationships between rift obliquities and rift duration nor the presence or absence of Large Igneous Provinces (LIPs).

Effect of modified cementation technique on marginal fit and apical spread of excess cement for implant restorations: An in vitro study

Directory of Open Access Journals (Sweden)

Brijesh Patel

2016-01-01

Full Text Available Aim: To investigate and compare the vertical marginal discrepancy and spread of excess cement after cementation with modified cementation technique and conventional technique. Materials and Methods: Ten implant analogs with prefabricated standard abutments of similar dimensions were mounted individually in self-cure acrylic blocks subcrestally. Forty ideal metal coping specimens were prepared by conventional lost wax technique. Measurement of the marginal discrepancy at the implant-crown interface was done using a stereomicroscope before cementation. Abutment replicas (ARs were prepared for twenty specimens using cast copings and pattern resin. All forty copings were cemented according to the following cementation techniques and cement types, with ten specimens in each group. (1 Group 1: Half filling (HF cementation technique using provisional cement. (2 Group 2: HF cementation technique using permanent cement. (3 Group 3: AR technique using provisional cement. (4 Group 4: AR technique using permanent cement. Specimens were subjected to measurement of marginal discrepancy and spread of excess cement using stereomicroscope after cementation procedure. Data were analyzed using paired t-test and unpaired t-test. Results: AR technique showed significantly less marginal discrepancy (P = 0.000 and apical spread of excess cement (P = 0.002 than conventional HF technique. Provisional cement showed significantly more marginal discrepancy (HF-P = 0.000 and AR-P = 0.001 and less apical spread of excess cement (HF-P = 0.023 and AR-P = 0.002 and among both technique. Statistical Analysis: Unpaired t-test. Conclusion: An alternative technique of using AR is effective technique to prevent peri-implant diseases.

Institutional investor monitoring motivation and the\\ud marginal value of cash

OpenAIRE

Zeng, Yeqin; Yin, Chao; Ward, Charles

2018-01-01

This paper examines whether the motivation of institutional investors in monitoring a firm is positively related to the relative importance of the firm's stock in their portfolios. We find that greater motivated monitoring institutional ownership is associated with a higher marginal value of corporate cash holdings, which cannot be explained by other corporate governance measures and institution types. Further, we find that the economic effect of institutional monitoring on the marginal value...

On the evaluation of marginal expected shortfall

DEFF Research Database (Denmark)

Caporin, Massimiliano; Santucci de Magistris, Paolo

2012-01-01

In the analysis of systemic risk, Marginal Expected Shortfall may be considered to evaluate the marginal impact of a single stock on the market Expected Shortfall. These quantities are generally computed using log-returns, in particular when there is also a focus on returns conditional distribution....... In this case, the market log-return is only approximately equal to the weighed sum of equities log-returns. We show that the approximation error is large during turbulent market phases, with a subsequent impact on Marginal Expected Shortfall. We then suggest how to improve the evaluation of Marginal Expected...

[Resection margins in conservative breast cancer surgery].

Science.gov (United States)

Medina Fernández, Francisco Javier; Ayllón Terán, María Dolores; Lombardo Galera, María Sagrario; Rioja Torres, Pilar; Bascuñana Estudillo, Guillermo; Rufián Peña, Sebastián

2013-01-01

Conservative breast cancer surgery is facing a new problem: the potential tumour involvement of resection margins. This eventuality has been closely and negatively associated with disease-free survival. Various factors may influence the likelihood of margins being affected, mostly related to the characteristics of the tumour, patient or surgical technique. In the last decade, many studies have attempted to find predictive factors for margin involvement. However, it is currently the new techniques used in the study of margins and tumour localisation that are significantly reducing reoperations in conservative breast cancer surgery. Copyright © 2012 AEC. Published by Elsevier Espana. All rights reserved.

Marginal microfiltration in amalgam restorations. Review

OpenAIRE

Lahoud Salem, Víctor

2014-01-01

The present articule is review references from phenomenon of microfiltration in restorations with amalgam and yours consecuents in changes of color in the interface tooth-restorations, margin deterioted , sensitivity dentinarea postoperate, caries secondary and pulp inflamation. Besides naming the mechanicals for to reduce microfiltration, and yours effects for use of sealers dentinaries representation for the varnish cavitys and adhesive systens Conclusive indicate wath the amalgam is the ma...

[Lead poisoning and marginalization in newborns of Morelos, Mexico].

Science.gov (United States)

Téllez-Rojo, Martha María; Bautista-Arredondo, Luis F; Richardson, Vesta; Estrada-Sánchez, Daniel; Ávila-Jiménez, Laura; Ríos, Camilo; Cantoral-Preciado, Alejandra; Romero-Martínez, Martín; Flores-Pimentel, Delia; Melo-Zurita, María Del Carmen; Romero-Ramírez, Anita; León-Mazón, Marco Antonio; Montes, Sergio; Fuller, Richard; Hernández-Ávila, Mauricio

2017-01-01

To determine the prevalence of lead (Pb) poisoning at birth in Morelos, analyze its distribution by social marginalization level, and estimate the association with the use of lead glazed ceramics (LGC). Blood lead level (BLL) in umbilical cord was measured in a representative sample of 300 randomly selected births at the Morelos Health Services and state IMSS. The prevalence of Pb poisoning at birth (BLL> 5μg/dL) was 14.7% (95%CI: 11.1, 19.3) and 22.2% (95%CI: 14.4, 32.5) in the most socially marginalized municipalities. 57.1% (95%CI: 51.3, 62.7) of the mothers used LGC during pregnancy, and the frequency of use was significantly associated with BLL. This is the first study to document the proportion of newborns with Pb poisoning who are at risk of experiencing the related adverse effects. It is recommended to monitor BLL at birth and take action to reduce this exposure, especially in socially marginalized populations.

Marginal microleakage of class V composite restorations before and after AFP gel application

Directory of Open Access Journals (Sweden)

Davari Abdolrahim

2015-01-01

Full Text Available   Background and Aims: The most effective preventing tooth decay method is fluoride compounds applications. Some studies suggested that APF gels caused changes on the superficial physical properties of composite. Therefore, the purpose of this study was to evaluate the marginal microleakage of class V composite restorations before and after AFP gel application.   Materials and Methods: The class V cavities in buccal surfaces of 45 molar teeth were made in such a way that occlusal margin was placed in enamel and cervical margin in cement. In group 1, at first fluoride-therapy and then cavity preparation and restoration by composite resin was done. In group 2, at first the class V cavities were prepared and restored, then fluoride-therapy was carried out. In group 3, cavities were prepared and restored with no fluoride-therapy. The dye penetration rate in occlusal and cervical margins was examined by stereomicroscope. Data were statistically analyzed using Kruskal-Wallis and Mann-Whitney test.   Results: There was no statistically significant difference between groups ( P=0.975.   Conclusion: Fluoride-therapy using AFP gel before and after class V composite restorations, had no significant effect on the microleakage of dentin and enamel margins.

Risk Informed Safety Margin Characterization Case Study: Selection of Electrical Equipment To Be Subjected to Environmental Qualification

Energy Technology Data Exchange (ETDEWEB)

D. Blanchard; R. Youngblood

2012-04-01

In general, the margins-based safety case helps the decision-maker manage plant margins most effectively. It tells the plant decision-maker such things as what margin is present (at the plant level, at the functional level, at the barrier level, at the component level), and where margin is thin or perhaps just degrading. If the plant is safe, it tells the decision-maker why the plant is safe and where margin needs to be maintained, and perhaps where the plant can afford to relax.

Margins for geometric uncertainty around organs at risk in radiotherapy

International Nuclear Information System (INIS)

McKenzie, Alan; Herk, Marcel van; Mijnheer, Ben

2002-01-01

Background and purpose: ICRU Report 62 suggests drawing margins around organs at risk (ORs) to produce planning organ at risk volumes (PRVs) to account for geometric uncertainty in the radiotherapy treatment process. This paper proposes an algorithm for drawing such margins, and compares the recommended margin widths with examples from clinical practice and discusses the limitations of the approach. Method: The use of the PRV defined in this way is that, despite the geometric uncertainties, the dose calculated within the PRV by the treatment planning system can be used to represent the dose in the OR with a certain confidence level. A suitable level is where, in the majority of cases (90%), the dose-volume histogram of the PRV will not under-represent the high-dose components in the OR. In order to provide guidelines on how to do this in clinical practice, this paper distinguishes types of OR in terms of the tolerance doses relative to the prescription dose and suggests appropriate margins for serial-structure and parallel-structure ORs. Results: In some instances of large and parallel ORs, the clinician may judge that the complication risk in omitting a margin is acceptable. Otherwise, for all types of OR, systematic, treatment preparation uncertainties may be accommodated by an OR→PRV margin width of 1.3Σ. Here, Σ is the standard deviation of the combined systematic (treatment preparation) uncertainties. In the case of serial ORs or small, parallel ORs, the effects of blurring caused by daily treatment execution errors (set-up and organ motion) should be taken into account. Near a region of high dose, blurring tends to shift the isodoses away from the unblurred edge as shown on the treatment planning system by an amount that may be represented by 0.5σ. This margin may be used either to increase or to decrease the margin already calculated for systematic uncertainties, depending upon the size of the tolerance dose relative to the detailed planned dose

Methylation patterns in marginal zone lymphoma.

Science.gov (United States)

Arribas, Alberto J; Bertoni, Francesco

Promoter DNA methylation is a major regulator of gene expression and transcription. The identification of methylation changes is important for understanding disease pathogenesis, for identifying prognostic markers and can drive novel therapeutic approaches. In this review we summarize the current knowledge regarding DNA methylation in MALT lymphoma, splenic marginal zone lymphoma, nodal marginal zone lymphoma. Despite important differences in the study design for different publications and the existence of a sole large and genome-wide methylation study for splenic marginal zone lymphoma, it is clear that DNA methylation plays an important role in marginal zone lymphomas, in which it contributes to the inactivation of tumor suppressors but also to the expression of genes sustaining tumor cell survival and proliferation. Existing preclinical data provide the rationale to target the methylation machinery in these disorders. Copyright © 2016 Elsevier Ltd. All rights reserved.

Silenced, Silence, Silent: Motherhood in the Margins

Science.gov (United States)

Carpenter, Lorelei; Austin, Helena

2007-01-01

This project explores the experiences of women who mother children with ADHD. The authors use the metaphor of the text and the margin. The text is the "motherhood myth" that describes a particular sort of "good" mothering. The margin is the space beyond that text. This marginal space is inhabited by some or all of the mothers they spoke with, some…

System Guidelines for EMC Safety-Critical Circuits: Design, Selection, and Margin Demonstration

Science.gov (United States)

Lawton, R. M.

1996-01-01

Demonstration of safety margins for critical points (circuits) has traditionally been required since it first became a part of systems-level Electromagnetic Compatibility (EMC) requirements of MIL-E-6051C. The goal of this document is to present cost-effective guidelines for ensuring adequate Electromagnetic Effects (EME) safety margins on spacecraft critical circuits. It is for the use of NASA and other government agencies and their contractors to prevent loss of life, loss of spacecraft, or unacceptable degradation. This document provides practical definition and treatment guidance to contain costs within affordable limits.

Experimental measurements and numerical modeling of marginal burning in live chaparral fuel beds

Science.gov (United States)

X. Zhou; D.R. Weise; S Mahalingam

2005-01-01

An extensive experimental and numerical study was completed to analyze the marginal burning behavior of live chaparral shrub fuels that grow in the mountains of southern California. Laboratory fire spread experiments were carried out to determine the effects of wind, slope, moisture content, and fuel characteristics on marginal burning in fuel beds of common...

Variability of the geothermal gradient across two differently aged magma-rich continental rifted margins of the Atlantic Ocean: the Southwest African and the Norwegian margins

Science.gov (United States)

Gholamrezaie, Ershad; Scheck-Wenderoth, Magdalena; Sippel, Judith; Strecker, Manfred R.

2018-02-01

The aim of this study is to investigate the shallow thermal field differences for two differently aged passive continental margins by analyzing regional variations in geothermal gradient and exploring the controlling factors for these variations. Hence, we analyzed two previously published 3-D conductive and lithospheric-scale thermal models of the Southwest African and the Norwegian passive margins. These 3-D models differentiate various sedimentary, crustal, and mantle units and integrate different geophysical data such as seismic observations and the gravity field. We extracted the temperature-depth distributions in 1 km intervals down to 6 km below the upper thermal boundary condition. The geothermal gradient was then calculated for these intervals between the upper thermal boundary condition and the respective depth levels (1, 2, 3, 4, 5, and 6 km below the upper thermal boundary condition). According to our results, the geothermal gradient decreases with increasing depth and shows varying lateral trends and values for these two different margins. We compare the 3-D geological structural models and the geothermal gradient variations for both thermal models and show how radiogenic heat production, sediment insulating effect, and thermal lithosphere-asthenosphere boundary (LAB) depth influence the shallow thermal field pattern. The results indicate an ongoing process of oceanic mantle cooling at the young Norwegian margin compared with the old SW African passive margin that seems to be thermally equilibrated in the present day.

Geochemical evidences of methane hydrate dissociation in Alaskan Beaufort Margin during Holocene

Science.gov (United States)

Uchida, M.; Rella, S.; Kubota, Y.; Kumata, H.; Mantoku, K.; Nishino, S.; Itoh, M.

2017-12-01

Alaskan Beaufort margin bear large abundances of sub-sea and permafrost methane hydrate[Ruppel, 2016]. During the Last Glacial, previous reported direct and indirect evidences accumulated from geochemical data from marginal sea sediment suggests that methane episodically released from hydrate trapped in the seafloor sediments[Kennett et al., 2000; Uchida et al., 2006, 2008; Cook et al, 2011]. Here we analyzed stable isotopes of foraminifera and molecular marker derived from the activity of methanotrophic bacteria from piston cores collected by the 2010 R/V Mirai cruise in Alaskan Beaufort Margin. Our data showed highly depleted 13C compositions of benthic foraminifera, suggesting indirect records of enhanced incorporation of 13C-depleted CO2 formed by methanotrophic process that use 12C-enriched methane as their main source of carbon. This is the first evidence of methane hydrate dissociation in Alaskan margin. Here we discussed timing of signals of methane dissociation with variability of sea ice and intermediate Atlantic water temperature. The dissociation of methane hydrate in the Alaskan Margin may be modulated by Atlantic warm intermediate water warming. Our results suggest that Arctic marginal regions bearing large amount methane hydrate may be a profound effect on future warming climate changes.

Marginalized zero-inflated negative binomial regression with application to dental caries.

Science.gov (United States)

Preisser, John S; Das, Kalyan; Long, D Leann; Divaris, Kimon

2016-05-10

The zero-inflated negative binomial regression model (ZINB) is often employed in diverse fields such as dentistry, health care utilization, highway safety, and medicine to examine relationships between exposures of interest and overdispersed count outcomes exhibiting many zeros. The regression coefficients of ZINB have latent class interpretations for a susceptible subpopulation at risk for the disease/condition under study with counts generated from a negative binomial distribution and for a non-susceptible subpopulation that provides only zero counts. The ZINB parameters, however, are not well-suited for estimating overall exposure effects, specifically, in quantifying the effect of an explanatory variable in the overall mixture population. In this paper, a marginalized zero-inflated negative binomial regression (MZINB) model for independent responses is proposed to model the population marginal mean count directly, providing straightforward inference for overall exposure effects based on maximum likelihood estimation. Through simulation studies, the finite sample performance of MZINB is compared with marginalized zero-inflated Poisson, Poisson, and negative binomial regression. The MZINB model is applied in the evaluation of a school-based fluoride mouthrinse program on dental caries in 677 children. Copyright © 2015 John Wiley & Sons, Ltd.

Margination of Fluorescent Polylactic Acid–Polyaspartamide based Nanoparticles in Microcapillaries In Vitro: the Effect of Hematocrit and Pressure

Directory of Open Access Journals (Sweden)

Emanuela Fabiola Craparo

2017-10-01

Full Text Available The last decade has seen the emergence of vascular-targeted drug delivery systems as a promising approach for the treatment of many diseases, such as cardiovascular diseases and cancer. In this field, one of the major challenges is carrier margination propensity (i.e., particle migration from blood flow to vessel walls; indeed, binding of these particles to targeted cells and tissues is only possible if there is direct carrier–wall interaction. Here, a microfluidic system mimicking the hydrodynamic conditions of human microcirculation in vitro is used to investigate the effect of red blood cells (RBCs on a carrier margination in relation to RBC concentration (hematocrit and pressure drop. As model drug carriers, fluorescent polymeric nanoparticles (FNPs were chosen, which were obtained by using as starting material a pegylated polylactic acid–polyaspartamide copolymer. The latter was synthesized by derivatization of α,β-poly(N-2-hydroxyethyl-d,l-aspartamide (PHEA with Rhodamine (RhB, polylactic acid (PLA and then poly(ethyleneglycol (PEG chains. It was found that the carrier concentration near the wall increases with increasing pressure drop, independently of RBC concentration, and that the tendency for FNP margination decreases with increasing hematocrit. This work highlights the importance of taking into account RBC–drug carrier interactions and physiological conditions in microcirculation when planning a drug delivery strategy based on systemically administered carriers.

Aspects of marginal expenditures in energy sector

International Nuclear Information System (INIS)

Stojchev, D.; Kynev, K.

1994-01-01

Technical and economical problems of marginal analysis methodology, its application procedure in energy sector and marginal expenditures determination are outlined. A comparative characteristics of the application is made for different periods of time. The differences in calculation of the marginal expenditures and prices are discussed. The operational costs, investments and inflation are analyzed. The mechanism of application of this approach in different planing horizon is outlined. The role of the change in the costs in time, the time unit, volume, the scope of application, etc. are determined. The areas of transition from one to other form of marginal expenditures are shown. 4 refs. (orig.)

Effect of Blood Contamination on Marginal Adaptation and Surface Microstructure of Mineral Trioxide Aggregate: A SEM Study

OpenAIRE

Amin Salem Milani; Saeed Rahimi; Mohammad Froughreyhani; Mahdi Vahid Pakdel

2013-01-01

Background and aims. In various clinical situations, mineral trioxide aggregate (MTA) may come into direct contact or even be mixed with blood. The aim of the present study was to evaluate the effect of exposure to blood on marginal adaptation and surface microstructure of MTA. Materials and methods. Thirty extracted human single-rooted teeth were used. Standard root canal treatment was carried out. Root-ends were resected, and retrocavities were prepared. The teeth were randomly ...

Characterizing entanglement with global and marginal entropic measures

International Nuclear Information System (INIS)

Adesso, Gerardo; Illuminati, Fabrizio; De Siena, Silvio

2003-01-01

We qualify the entanglement of arbitrary mixed states of bipartite quantum systems by comparing global and marginal mixednesses quantified by different entropic measures. For systems of two qubits we discriminate the class of maximally entangled states with fixed marginal mixednesses, and determine an analytical upper bound relating the entanglement of formation to the marginal linear entropies. This result partially generalizes to mixed states the quantification of entanglement with marginal mixednesses holding for pure states. We identify a class of entangled states that, for fixed marginals, are globally more mixed than product states when measured by the linear entropy. Such states cannot be discriminated by the majorization criterion

Steel Industry Marginal Opportunity Analysis

Energy Technology Data Exchange (ETDEWEB)

none,

2005-09-01

The Steel Industry Marginal Opportunity Analysis (PDF 347 KB) identifies opportunities for developing advanced technologies and estimates both the necessary funding and the potential payoff. This analysis determines what portion of the energy bandwidth can be captured through the adoption of state-of-the-art technology and practices. R&D opportunities for addressing the remainder of the bandwidth are characterized and plotted on a marginal opportunity curve.

Steep microbial boundstone-dominated plaform margins

NARCIS (Netherlands)

Kenter, J.A.M.; Harris, P.M.; Della Porta, G.P.

2005-01-01

Seaward progradation of several kilometers has been documented mostly for leeward margin low-angle carbonate slope systems with a dominant platform top sediment source. However, steep and high-relief margins fronting deep basins can also prograde and as such are somewhat perplexing. Characteristics

Effect of CNC-milling on the marginal and internal fit of dental ceramics: a pilot study.

Science.gov (United States)

Schaefer, Oliver; Kuepper, Harald; Thompson, Geoffrey A; Cachovan, Georg; Hefti, Arthur F; Guentsch, Arndt

2013-08-01

Machined restorations have been investigated for their preciseness before, while detailed information on the milling-step itself are lacking. Therefore, the aim of this laboratory study was to quantify the effect of a novel milling-procedure on the marginal and internal fit of ceramic restorations. An acrylic model of a lower left first molar was prepared to receive a ceramic partial crown and was duplicated by one step dual viscosity impressions. Gypsum casts were formed and laser-scanned to realize virtual datasets, before restorations were designed, exported (PRE) and machined from lithium disilicate blanks. Crowns were digitized by a structure-light-scanner to obtain post-milling-data (POST). PRE and POST were virtually superimposed on the reference tooth and subjected to computer-aided-inspection. Visual fit-discrepancies were displayed with colors, while root mean square deviations (RMSD) and degrees of similarity (DS) were computed and analysed by t-tests for paired samples (n=5, α=0.05). The milling procedure resulted in a small increase of the marginal and internal fit discrepancies (RMSD mean: 3μm and 6μm, respectively). RMSD differences were not statistically significant (p=0.495 and p=0.160 for marginal and internal fit, respectively). These results were supported by the DS data. The products of digital dental workflows are prone to imprecisions. However, the present findings suggest that differences between computer-aided designed and actually milled restorations are small, especially when compared to typical fit discrepancies observed clinically. Imprecisions introduced by digital design or production processes are small. Copyright © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Influence of margin status and radiation on recurrence after radical hysterectomy in Stage IB cervical cancer

International Nuclear Information System (INIS)

Viswanathan, Akila N.; Lee, Hang; Hanson, Emily; Berkowitz, Ross S.; Crum, Christopher P.

2006-01-01

Purpose: To examine the relationship between margin status and local recurrence (LR) or any recurrence after radical hysterectomy (RH) in women treated with or without radiotherapy (RT) for Stage IB cervical carcinoma. Methods and Materials: This study included 284 patients after RH with assessable margins between 1980 and 2000. Each margin was scored as negative (≥1 cm), close (>0 and <1 cm), or positive. The outcomes measured were any recurrence, LR, and relapse-free survival. Results: The crude rate for any recurrence was 11%, 20%, and 38% for patients with negative, close, and positive margins, respectively. The crude rate for LR was 10%, 11%, and 38%, respectively. Postoperative RT decreased the rate of LR from 10% to 0% for negative, 17% to 0% for close, and 50% to 25% for positive margins. The significant predictors of decreased relapse-free survival on univariate analysis were the depth of tumor invasion (hazard ratio [HR] 2.14/cm increase, p = 0.007), positive margins (HR 3.92, p = 0.02), tumor size (HR 1.3/cm increase, p = 0.02), lymphovascular invasion (HR 2.19, p = 0.03), and margin status (HR 0.002/increasing millimeter from cancer for those with close margins, p = 0.03). Long-term side effects occurred in 8% after RH and 19% after RH and RT. Conclusion: The use of postoperative RT may decrease the risk of LR in patients with close paracervical margins. Patients with other adverse prognostic factors and close margins may also benefit from the use of postoperative RT. However, RT after RH may increase the risk of long-term side effects

A margin-based analysis of the dosimetric impact of motion on step-and-shoot IMRT lung plans

International Nuclear Information System (INIS)

Waghorn, Benjamin J; Shah, Amish P; Rineer, Justin M; Langen, Katja M; Meeks, Sanford L

2014-01-01

Intrafraction motion during step-and-shoot (SNS) IMRT is known to affect the target dosimetry by a combination of dose blurring and interplay effects. These effects are typically managed by adding a margin around the target. A quantitative analysis was performed, assessing the relationship between target motion, margin size, and target dosimetry with the goal of introducing new margin recipes. A computational algorithm was used to calculate 1,174 motion-encoded dose distributions and DVHs within the patient’s CT dataset. Sinusoidal motion tracks were used simulating intrafraction motion for nine lung tumor patients, each with multiple margin sizes. D 95% decreased by less than 3% when the maximum target displacement beyond the margin experienced motion less than 5 mm in the superior-inferior direction and 15 mm in the anterior-posterior direction. For target displacements greater than this, D 95% decreased rapidly. Targets moving in excess of 5 mm outside the margin can cause significant changes to the target. D 95% decreased by up to 20% with target motion 10 mm outside the margin, with underdosing primarily limited to the target periphery. Multi-fractionated treatments were found to exacerbate target under-coverage. Margins several millimeters smaller than the maximum target displacement provided acceptable motion protection, while also allowing for reduced normal tissue morbidity

Conference Report: The New Discovery of Margins: Theory-Based Excursions in Marginal Social Fields

OpenAIRE

Kirchner, Babette; Lorenzen, Jule-Marie; Striffler, Christine

2014-01-01

At this year's spring conference of the Sociology of Knowledge Section of the German Sociological Association, a diverse range of theoretical concepts and multiple empirical insights into different marginal social fields were presented. As in everyday life, drawing a line between center and margin can be seen as an important challenge that must equally be faced in sociology. The socially constructed borderline appears to be highly variable. Therefore it has to be delineated or fixed somehow. ...

Accountable Accounting: Carbon-Based Management on Marginal Lands

Directory of Open Access Journals (Sweden)

Tara L. DiRocco

2014-04-01

Full Text Available Substantial discussion exists concerning the best land use options for mitigating greenhouse gas (GHG emissions on marginal land. Emissions-mitigating land use options include displacement of fossil fuels via biofuel production and afforestation. Comparing C recovery dynamics under these different options is crucial to assessing the efficacy of offset programs. In this paper, we focus on forest recovery on marginal land, and show that there is substantial inaccuracy and discrepancy in the literature concerning carbon accumulation. We find that uncertainty in carbon accumulation occurs in estimations of carbon stocks and models of carbon dynamics over time. We suggest that analyses to date have been largely unsuccessful at determining reliable trends in site recovery due to broad land use categories, a failure to consider the effect of current and post-restoration management, and problems with meta-analysis. Understanding of C recovery could be greatly improved with increased data collection on pre-restoration site quality, prior land use history, and management practices as well as increased methodological standardization. Finally, given the current and likely future uncertainty in C dynamics, we recommend carbon mitigation potential should not be the only environmental service driving land use decisions on marginal lands.

On the functional failures concept and probabilistic safety margins: challenges in application for evaluation of effectiveness of shutdown systems - 15318

International Nuclear Information System (INIS)

Serghiuta, D.; Tholammakkil, J.

2015-01-01

The use of level-3 reliability approach and the concept of functional failure probability could provide the basis for defining a safety margin metric which would include a limit for the probability of functional failure, in line with the definition of a reliability-based design. It can also allow a quantification of level of confidence, by explicit modeling and quantification of uncertainties, and provide a better framework for representation of actual design and optimization of design margins within an integrated probabilistic-deterministic model. This paper reviews the attributes and challenges in application of functional failure concept in evaluation of risk-informed safety margins using as illustrative example the case of CANDU reactors shutdown systems effectiveness. A risk-informed formulation is first introduced for estimation of a reasonable limit for the functional failure probability using a Swiss cheese model. It is concluded that more research is needed in this area and a deterministic - probabilistic approach may be a reasonable intermediate step for evaluation of functional failure probability at the system level. The views expressed in this paper are those of the authors and do not necessarily reflect those of CNSC, or any part thereof. (authors)

From Borders to Margins

DEFF Research Database (Denmark)

Parker, Noel

2009-01-01

of entities that are ever open to identity shifts.  The concept of the margin possesses a much wider reach than borders, and focuses continual attention on the meetings and interactions between a range of indeterminate entities whose interactions may determine both themselves and the types of entity...... upon Deleuze's philosophy to set out an ontology in which the continual reformulation of entities in play in ‘post-international' society can be grasped.  This entails a strategic shift from speaking about the ‘borders' between sovereign states to referring instead to the ‘margins' between a plethora...

CRBRP structural and thermal margin beyond the design base

International Nuclear Information System (INIS)

Strawbridge, L.E.

1979-01-01

Prudent margins beyond the design base have been included in the design of Clinch River Breeder Reactor Plant to further reduce the risk to the public from highly improbable occurrences. These margins include Structural Margin Beyond the Design Base to address the energetics aspects and Thermal Margin Beyond the Design Base to address the longer term thermal and radiological consequences. The assessments that led to the specification of these margins are described, along with the experimental support for those assessments. 8 refs

A comparative study to evaluate the effect of two different abutment designs on soft tissue healing and stability of mucosal margins

NARCIS (Netherlands)

Patil, Ratnadeep; van Brakel, Ralph; Iyer, Kavita; Huddleston Slater, James; de Putter, Cornelis; Cune, Marco

Aim To evaluate the effect of two different abutment designs on soft tissue healing and the stability of the mucosal margin in vivo. Materials and methods Twenty-nine subjects received two, non-adjacent endosseous implants in the esthetic zone. Subsequently, conventional (control) and curved

Warming of intravenous and irrigation fluids for preventing inadvertent perioperative hypothermia.

Science.gov (United States)

Campbell, Gillian; Alderson, Phil; Smith, Andrew F; Warttig, Sheryl

2015-04-13

Inadvertent perioperative hypothermia (a drop in core temperature to below 36°C) occurs because of interference with normal temperature regulation by anaesthetic drugs, exposure of skin for prolonged periods and receipt of large volumes of intravenous and irrigation fluids. If the temperature of these fluids is below core body temperature, they can cause significant heat loss. Warming intravenous and irrigation fluids to core body temperature or above might prevent some of this heat loss and subsequent hypothermia. To estimate the effectiveness of preoperative or intraoperative warming, or both, of intravenous and irrigation fluids in preventing perioperative hypothermia and its complications during surgery in adults. We searched the Cochrane Central Register of Controlled Trials (CENTRAL) (2014, Issue 2), MEDLINE Ovid SP (1956 to 4 February 2014), EMBASE Ovid SP (1982 to 4 February 2014), the Institute for Scientific Information (ISI) Web of Science (1950 to 4 February 2014), Cumulative Index to Nursing and Allied Health Literature (CINAHL) EBSCOhost (1980 to 4 February 2014) and reference lists of identified articles. We also searched the Current Controlled Trials website and ClinicalTrials.gov. We included randomized controlled trials or quasi-randomized controlled trials comparing fluid warming methods versus standard care or versus other warming methods used to maintain normothermia. Two review authors independently extracted data from eligible trials and settled disputes with a third review author. We contacted study authors to ask for additional details when needed. We collected data on adverse events only if they were reported in the trials. We included in this review 24 studies with a total of 1250 participants. The trials included various numbers and types of participants. Investigators used a range of methods to warm fluids to temperatures between 37°C and 41°C. We found that evidence was of moderate quality because descriptions of trial design were

The Effect of Various Finish Line Configurations on the Marginal Seal and Occlusal Discrepancy of Cast Full Crowns After Cementation - An In-vitro Study.

Science.gov (United States)

Nemane, Vaishali; Akulwar, Ravikumar Suryakanth; Meshram, Suresh

2015-08-01

The marginal fit of crowns is of clinical importance. It is found that marginal and occlusal discrepancies are commonly increased following cementation. The resistance of cementing materials is a factor that prevents cast restorations from being correctly seated. Different finish lines behave differently in facilitating the escape of the cement. When the escape path of the cement decreases, the crown fails to seat further. This study was planned with an aim to evaluate the effect of various finish lines on the marginal seal and occlusal seat of full crown preparations. Six stainless steel metal dies were machined to simulate molar crown preparations. The diameter was 10 mm and height was 6mm. The occlusal surface was kept flat and a small circular dimple was machined for reorientation of the wax pattern and metal copings, margins of various designs were machined accurately. The margins prepared were Group A- 90(0)C shoulder, Group B- Rounded shoulder, Group C- 45 degree sloped shoulder, Group D- Chamfer, Group E- Long chamfer, Group F- Feather edge. Full cast metal crowns of base metal alloy were fabricated over the metal dies. Zinc phosphate luting cement was used for the cementation. After twenty four hours, the cemented crown and die assembly were embedded in clear acrylic resin so as to hold the assembly together while sectioning. Twenty four hours later, all the samples were sectioned sagitally. The sectioned halves were focused under a stereomicroscope and the cement spaces were measured to the nearest micron. The cement thickness was measured at two points on the occlusal surface and one at each margin. Significant differences were observed in the occlusal seat and marginal seal of all the finish line configurations. The rounded shoulder had the best occlusal seat, followed by 90(0)C shoulder. The occlusal seat and marginal seal afforded by the shoulder finish lines were similar whereas there was a vast difference in the seating and sealing of long chamfer

Positive Surgical Margins in Favorable-Stage Differentiated Thyroid Cancer.

Science.gov (United States)

Mercado, Catherine E; Drew, Peter A; Morris, Christopher G; Dziegielewski, Peter T; Mendenhall, William M; Amdur, Robert J

2018-04-16

The significance of positive margin in favorable-stage well-differentiated thyroid cancer is controversial. We report outcomes of positive-margin patients with a matched-pair comparison to a negative-margin group. A total of 25 patients with classic-histology papillary or follicular carcinoma, total thyroidectomy +/- node dissection, stage T1-3N0-1bM0, positive surgical margin at primary site, adjuvant radioactive iodine (I-131), and age older than 18 years were treated between 2003 and 2013. Endpoints were clinical and biochemical (thyroglobulin-only) recurrence-free survival. Matched-pair analysis involved a 1:1 match with negative-margin cases matched for overall stage and I-131 dose. Recurrence-free survival in positive-margin patients was 71% at 10 years. No patient was successfully salvaged with additional treatment. Only 1 patient died of thyroid cancer. Recurrence-free survival at 10 years was worse with a positive (71%) versus negative (90%) margin (P=0.140). Cure with a microscopically positive margin was suboptimal (71%) despite patients having classic-histology papillary and follicular carcinoma, favorable stage, and moderate-dose I-131 therapy.

Learning Convex Inference of Marginals

OpenAIRE

Domke, Justin

2012-01-01

Graphical models trained using maximum likelihood are a common tool for probabilistic inference of marginal distributions. However, this approach suffers difficulties when either the inference process or the model is approximate. In this paper, the inference process is first defined to be the minimization of a convex function, inspired by free energy approximations. Learning is then done directly in terms of the performance of the inference process at univariate marginal prediction. The main ...

Extraction of data from margin calculations in prostate radiotherapy from a commercial record and verify system

International Nuclear Information System (INIS)

Fox, C.; Kron, T.; Fisher, R.; Tai, K.H.; Thompson, A.; Owen, R.

2008-01-01

Full text: Radiation therapy is a widely prescribed and effective modality for the treatment of prostate cancer.1 3 Radiation therapy relies on precise targeting of the treatment site to deliver the required dose to the tumour while sparing critical organs nearby. To achieve this, it is necessary to allow for the effects of organ and patient motion, both during and between treatment fractions. In the treatment planning process, a margin is added to the clinical target volume (CTV) to create the planning target volume (PTV) to allow for targeting uncertainties which Iare dominated by these movements.4 5 Deciding the appropriate margin size is important since an excessively large margin will result in increased damage to adjacent normal tissues while an undersized margin will leave parts of the target underdosed. With the marked improvement in technology available with new treatment machines, remote online setup correction using high quality kilovoltage images has become straightforward and widely available. Used together with implanted radio-opaque markers, remote online setup correction allows direct targeting of the prostate organ, and significant reduction in the effects of interfraction motion.6 1 1 The introduction of this technology into a therapy department makes a reduction of CTV to PTV margin size possible. There are many published works dealing with margin size calculation for prostate treatment planning. The best known and most widely cited work is that of van Herk which modelled the prostate using simple geometry to calculate a minimum dose coverage probability.13 The outcome of this modelling was a simple and easily understood formula with just the patient group random and systematic setup errors used to calculate margin size. To apply such margin recipes, the patient group's random and systematic error performance must be well known, which requires the collection of a substantial quantity of data. The aim of the project described here was to collect

Variability of the geothermal gradient across two differently aged magma-rich continental rifted margins of the Atlantic Ocean: the Southwest African and the Norwegian margins

Directory of Open Access Journals (Sweden)

E. Gholamrezaie

2018-02-01

Full Text Available The aim of this study is to investigate the shallow thermal field differences for two differently aged passive continental margins by analyzing regional variations in geothermal gradient and exploring the controlling factors for these variations. Hence, we analyzed two previously published 3-D conductive and lithospheric-scale thermal models of the Southwest African and the Norwegian passive margins. These 3-D models differentiate various sedimentary, crustal, and mantle units and integrate different geophysical data such as seismic observations and the gravity field. We extracted the temperature–depth distributions in 1 km intervals down to 6 km below the upper thermal boundary condition. The geothermal gradient was then calculated for these intervals between the upper thermal boundary condition and the respective depth levels (1, 2, 3, 4, 5, and 6 km below the upper thermal boundary condition. According to our results, the geothermal gradient decreases with increasing depth and shows varying lateral trends and values for these two different margins. We compare the 3-D geological structural models and the geothermal gradient variations for both thermal models and show how radiogenic heat production, sediment insulating effect, and thermal lithosphere–asthenosphere boundary (LAB depth influence the shallow thermal field pattern. The results indicate an ongoing process of oceanic mantle cooling at the young Norwegian margin compared with the old SW African passive margin that seems to be thermally equilibrated in the present day.

Spectrum estimation method based on marginal spectrum

International Nuclear Information System (INIS)

Cai Jianhua; Hu Weiwen; Wang Xianchun

2011-01-01

FFT method can not meet the basic requirements of power spectrum for non-stationary signal and short signal. A new spectrum estimation method based on marginal spectrum from Hilbert-Huang transform (HHT) was proposed. The procession of obtaining marginal spectrum in HHT method was given and the linear property of marginal spectrum was demonstrated. Compared with the FFT method, the physical meaning and the frequency resolution of marginal spectrum were further analyzed. Then the Hilbert spectrum estimation algorithm was discussed in detail, and the simulation results were given at last. The theory and simulation shows that under the condition of short data signal and non-stationary signal, the frequency resolution and estimation precision of HHT method is better than that of FFT method. (authors)

Lead poisoning and marginalization in newborns of Morelos, Mexico

Directory of Open Access Journals (Sweden)

Martha María Téllez-Rojo

2017-05-01

Full Text Available Objective. To determine the prevalence of lead (Pb poi- soning at birth in Morelos, analyze its distribution by social marginalization level, and estimate the association with the use of lead glazed ceramics (LGC. Materials and methods. Blood lead level (BLL in umbilical cord was measured in a representative sample of 300 randomly selected births at the Morelos Health Services and state IMSS. Results. The prevalence of Pb poisoning at birth (BLL> 5µg/dL was 14.7%(95%CI: 11.1, 19.3 and 22.2% (95%CI: 14.4, 32.5 in the most socially marginalized municipalities. 57.1% (95%CI: 51.3, 62.7of the mothers used LGC during pregnancy, and the frequency of use was significantly associated with BLL. Conclusion. This is the first study to document the proportion of new- borns with Pb poisoning who are at risk of experiencing the related adverse effects. It is recommended to monitor BLL at birth and take action to reduce this exposure, especially in socially marginalized populations.

Marginal abatement cost curves for NOx that account for ...

Science.gov (United States)

A marginal abatement cost curve (MACC) traces out the relationship between the quantity of pollution abated and the marginal cost of abating each additional unit. In the context of air quality management, MACCs typically are developed by sorting end-of-pipe controls by their respective cost effectiveness. Alternative measures, such as renewable electricity, energy efficiency, and fuel switching (RE/EE/FS), are not considered as it is difficult to quantify their abatement potential. In this paper, we demonstrate the use of an energy system model to develop a MACC for nitrogen oxides (NOx) that incorporates both end-of-pipe controls and these alternative measures. We decompose the MACC by sector, and evaluate the cost-effectiveness of RE/EE/FS relative to end-of-pipe controls. RE/EE/FS are shown to produce considerable emission reductions after end-of-pipe controls have been exhausted. Furthermore, some RE/EE/FS are shown to be cost-competitive with end-of-pipe controls. Demonstrate how the MARKAL energy system model can be used to evaluate the potential role of renewable electricity, energy efficiency and fuel switching (RE/EE/FS) in achieving NOx reductions. For this particular analysis, we show that RE/EE/FSs are able to increase the quantity of NOx reductions available for a particular marginal cost (ranging from $5k per ton to $40k per ton) by approximately 50%.

Optimal margin and edge-enhanced intensity maps in the presence of motion and uncertainty

International Nuclear Information System (INIS)

Chan, Timothy C Y; Tsitsiklis, John N; Bortfeld, Thomas

2010-01-01

In radiation therapy, intensity maps involving margins have long been used to counteract the effects of dose blurring arising from motion. More recently, intensity maps with increased intensity near the edge of the tumour (edge enhancements) have been studied to evaluate their ability to offset similar effects that affect tumour coverage. In this paper, we present a mathematical methodology to derive margin and edge-enhanced intensity maps that aim to provide tumour coverage while delivering minimum total dose. We show that if the tumour is at most about twice as large as the standard deviation of the blurring distribution, the optimal intensity map is a pure scaling increase of the static intensity map without any margins or edge enhancements. Otherwise, if the tumour size is roughly twice (or more) the standard deviation of motion, then margins and edge enhancements are preferred, and we present formulae to calculate the exact dimensions of these intensity maps. Furthermore, we extend our analysis to include scenarios where the parameters of the motion distribution are not known with certainty, but rather can take any value in some range. In these cases, we derive a similar threshold to determine the structure of an optimal margin intensity map.

Output Price Risk, Material Input Price Risk, and Price Margins: Evidence from the US Catfish Industry.

Directory of Open Access Journals (Sweden)

David Bouras

2017-07-01

Full Text Available Aim/purpose - To develop a conceptual model for analyzing the impact of output price risk and material input price risk on price margins. Design/methodology/approach - To analyze the combined effect of output price risk and material input risk on price margins, we use a series of comparative static analyses, GARCH models, and data ranging from 1990/01 to 2012/12. Findings - The theoretical results indicate that the impact of output price risk and the impact of material input price risk on price margins are ambiguous and, to a great extent, hinge on the correlation between output price and material input price. The empirical results show that whole frozen catfish price risk and live catfish price risk negatively affect the price margin for frozen catfish. The empirical results, however, indicate that the risk of the price of live catfish affects markedly the price margin for frozen whole catfish in contrast to the impact of the risk of the price of frozen whole catfish. Research implications/limitations - The empirical results have significant implications for managerial decision-making especially when crafting strategies for improving price margins. Accordingly, in order to beef up the price margin for frozen whole catfish, catfish processors may consider engaging in vertical integration. This paper has some limitations: first, it assumes that firms operate in competitive markets; second, it assumes that firms produce and sell a single product. Originality/value/contribution - Unlike earlier studies that focused solely on the effect of output price risk on price margins, this paper analyzes theoretically and empirically the impact of output price risk and material input price risk on price margins.

The Effects of Flattening the Effective Marginal Rate Structure in Australia: Policy Simulations Using the Melbourne Institute Tax and Transfer Simulator

OpenAIRE

John Creedy; Guyonne Kalb; Hsein Kew

2001-01-01

This paper uses the Melbourne Institute Tax and Transfer Simulator (MITTS) to examine the effects of a reduction in the means-tested benefit taper, or withdrawal, rates in Australia to 30 per cent. That is, all taper rates of 50 per cent and 70 per cent in the 1998 system are reduced to 30 per cent, while leaving all basic benefit levels unchanged. This change is therefore expected to ‘flatten’ the tax structure by reducing the high marginal tax rates applying to those with relatively low inc...

Centrifugal Compressor Surge Margin Improved With Diffuser Hub Surface Air Injection

Science.gov (United States)

Skoch, Gary J.

2002-01-01

design speed, and similar results were obtained. In most cases, the greatest improvement in surge margin occurred at fairly low levels of injected flow rate. Externally supplied injection air was used in these experiments. However, the injected flow rates that provided the greatest benefit could be produced using injection air that is recirculating between the diffuser discharge and nozzles located in the diffuser vaneless region. Future experiments will evaluate the effectiveness of recirculating air injection.

Thermal margin model for transition core of KSNP

International Nuclear Information System (INIS)

Nahm, Kee Yil; Lim, Jong Seon; Park, Sung Kew; Chun, Chong Kuk; Hwang, Sun Tack

2004-01-01

The PLUS7 fuel was developed with mixing vane grids for KSNP. For the transition core partly loaded with the PLUS7 fuels, the procedure to set up the optimum thermal margin model of the transition core was suggested by introducing AOPM concept into the screening method which determines the limiting assembly. According to the procedure, the optimum thermal margin model of the first transition core was set up by using a part of nuclear data for the first transition and the homogeneous core with PLUS7 fuels. The generic thermal margin model of PLUS7 fuel was generated with the AOPM of 138%. The overpower penalties on the first transition core were calculated to be 1.0 and 0.98 on the limiting assembly and the generic thermal margin model, respectively. It is not usual case to impose the overpower penalty on reload cores. It is considered that the lack of channel flow due to the difference of pressure drop between PLUS7 and STD fuels results in the decrease of DNBR. The AOPM of the first transition core is evaluated to be about 135% by using the optimum generic thermal margin model which involves the generic thermal margin model and the total overpower penalty. The STD fuel is not included among limiting assembly candidates in the second transition core, because they have much lower pin power than PLUS7 fuels. The reduced number of STD fuels near the limiting assembly candidates the flow from the limiting assembly to increase the thermal margin for the second transition core. It is expected that cycle specific overpower penalties increase the thermal margin for the transition core. Using the procedure to set up the optimum thermal margin model makes sure that the enhanced thermal margin of PLUS7 fuel can be sufficiently applied to not only the homogeneous core but also the transition core

Evaluation of the effect of different food media on the marginal integrity of class v compomer, conventional and resin-modified glass-ionomer restorations: an in vitro study.

Science.gov (United States)

Dinakaran, Shiji

2015-03-01

Cervical lesions of anterior and posterior teeth are a common finding in routine dental practice. They are of much concern to the patient, if present in esthetically sensitive regions. Adhesive tooth-colored restorative materials are generally recommended for treating such lesions. The aim of the present study was to evaluate and compare the effect of various food media (lime juice, tea, coffee, and Coca-Cola) on the marginal integrity of Class V compomer (Dyract(®)), conventional glass-ionomer (Fuji II) and resin-modified glass-ionomer (Fuji II LC improved) restorations along their cemental and enamel margins with saline as control media. After restoration of prepared Class V cavities in human premolars with the three different materials (n = 8), they were immersed in the test media for 7 days and then stained with methylene blue dye. Buccolingual sections were prepared and examined under stereomicroscope and scores (0-2) were given. Data were analyzed statistically using one-way analysis of variance in SPSS version 16.0. P Coca-Cola) compared to saline. Enamel margins showed more marginal adaptation than cemental margins.

Reconstructing Rodinia by Fitting Neoproterozoic Continental Margins

Science.gov (United States)

Stewart, John H.

2009-01-01

Reconstructions of Phanerozoic tectonic plates can be closely constrained by lithologic correlations across conjugate margins by paleontologic information, by correlation of orogenic belts, by paleomagnetic location of continents, and by ocean floor magmatic stripes. In contrast, Proterozoic reconstructions are hindered by the lack of some of these tools or the lack of their precision. To overcome some of these difficulties, this report focuses on a different method of reconstruction, namely the use of the shape of continents to assemble the supercontinent of Rodinia, much like a jigsaw puzzle. Compared to the vast amount of information available for Phanerozoic systems, such a limited approach for Proterozoic rocks, may seem suspect. However, using the assembly of the southern continents (South America, Africa, India, Arabia, Antarctica, and Australia) as an example, a very tight fit of the continents is apparent and illustrates the power of the jigsaw puzzle method. This report focuses on Neoproterozoic rocks, which are shown on two new detailed geologic maps that constitute the backbone of the study. The report also describes the Neoproterozoic, but younger or older rocks are not discussed or not discussed in detail. The Neoproterozoic continents and continental margins are identified based on the distribution of continental-margin sedimentary and magmatic rocks that define the break-up margins of Rodinia. These Neoproterozoic continental exposures, as well as critical Neo- and Meso-Neoproterozoic tectonic features shown on the two new map compilations, are used to reconstruct the Mesoproterozoic supercontinent of Rodinia. This approach differs from the common approach of using fold belts to define structural features deemed important in the Rodinian reconstruction. Fold belts are difficult to date, and many are significantly younger than the time frame considered here (1,200 to 850 Ma). Identifying Neoproterozoic continental margins, which are primarily

The effects of frequency-encoding gradient upon detectability of the margins and height measurements of normal adult pituitary glands

International Nuclear Information System (INIS)

Taketomi, A.; Sato, N.; Aoki, J.; Endo, K.

2004-01-01

We investigated the effects of frequency-encoding gradient (FEG) upon detectability and height measurements of the normal adult pituitary gland. We obtained two sets of T1-weighted sagittal images of the pituitary gland from 70 adult subjects without known pituitary dysfunction using 1.5 tesla imagers; one with an inferior-superior FEG, and one with an anterior-posterior FEG. We classified the subjects into three types according to the distribution of fatty marrow in the clivus. Each set of images was assessed for pituitary height on midline sagittal images, and detectability of pituitary margins. Height measurements and detectability scores were evaluated for significant difference between the two FEGs. In subjects with fatty marrow in the clivus, there was significant difference between pituitary height measurements (P<0.005) and pituitary margin detectability (P<0.001). Care should be taken to image the pituitary gland using an anterior-posterior FEG. (orig.)

Marginal socio-economic effects of an employer's efforts to improve the work environment.

Science.gov (United States)

Rezagholi, Mahmoud

2018-01-01

Workplace health promotion (WHP) strongly requires the employer's efforts to improve the psychosocial, ergonomic, and physical environments of the workplace. There are many studies discussing the socio-economic advantage of WHP intervention programmes and thus the internal and external factors motivating employers to implement and integrate such programmes. However, the socio-economic impacts of the employer's multifactorial efforts to improve the work environment need to be adequately assessed. Data were collected from Swedish company Sandvik Materials Technology (SMT) through a work environment survey in April 2014. Different regression equations were analysed to assess marginal effects of the employer's efforts on overall labour effectiveness (OLE), informal work impairments (IWI), lost working hours (LWH), and labour productivity loss (LPL) in terms of money. The employer's multifactorial efforts resulted in increasing OLE, decreasing IWI and illness-related LWH, and cost savings in terms of decreasing LPL. Environmental factors at the workplace are the important determinant factor for OLE, and the latter is where socio-economic impacts of the employer's efforts primarily manifest.

Margins in breast conserving surgery: The financial cost & potential savings associated with the new margin guidelines.

Science.gov (United States)

Singer, Lauren; Brown, Eric; Lanni, Thomas

2016-08-01

In this study, we compare the indications for re-excision, the findings of additional tumor in the re-excision specimen as they relate to margin status, and costs associated with re-excision based on recent new consensus statements. A retrospective analysis was performed on 462 patients with invasive breast carcinoma who underwent at least one lumpectomy between January 2011 and December 2013. Postoperative data was analyzed based on where additional disease was found, as it relates to the margin status of the initial lumpectomy and the additional direct costs associated with additional procedures. Of the 462 patients sampled, 149 underwent a re-excision surgery (32.2%). Four patients underwent mastectomy as their second operation. In the 40 patients with additional disease found on re-excision, 36 (90.0%) of them had a positive margin on their initial lumpectomy. None of the four mastectomy patients had residual disease. The mean cost of the initial lumpectomy for all 462 patients was $2118.01 plus an additional $1801.92 for those who underwent re-excision. A positive margin was most predictive of finding residual tumor on re-excision as would be expected. Using old criteria only 0.07% (4/61) of patients who had undergone re-excision with a 'clear' margin, had additional tumor found, at a total cost of $106,354.11. Thus, the new consensus guidelines will lead to less overall cost, at no clinical risk to patients while reducing a patient's surgical risk and essentially eliminating delays in adjuvant care. Copyright © 2016 Elsevier Ltd. All rights reserved.

Marginal Cost Pricing in a World without Perfect Competition: Implications for Electricity Markets with High Shares of Low Marginal Cost Resources

Energy Technology Data Exchange (ETDEWEB)

Frew, Bethany A. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Clark, Kara [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bloom, Aaron P. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Milligan, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2017-12-02

A common approach to regulating electricity is through auction-based competitive wholesale markets. The goal of this approach is to provide a reliable supply of power at the lowest reasonable cost to the consumer. This necessitates market structures and operating rules that ensure revenue sufficiency for all generators needed for resource adequacy purposes. Wholesale electricity markets employ marginal-cost pricing to provide cost-effective dispatch such that resources are compensated for their operational costs. However, marginal-cost pricing alone cannot guarantee cost recovery outside of perfect competition, and electricity markets have at least six attributes that preclude them from functioning as perfectly competitive markets. These attributes include market power, externalities, public good attributes, lack of storage, wholesale price caps, and ineffective demand curve. Until (and unless) these failures are ameliorated, some form of corrective action(s) will be necessary to improve market efficiency so that prices can correctly reflect the needed level of system reliability. Many of these options necessarily involve some form of administrative or out-of-market actions, such as scarcity pricing, capacity payments, bilateral or other out-of-market contracts, or some hybrid combination. A key focus with these options is to create a connection between the electricity market and long-term reliability/loss-of-load expectation targets, which are inherently disconnected in the native markets because of the aforementioned market failures. The addition of variable generation resources can exacerbate revenue sufficiency and resource adequacy concerns caused by these underlying market failures. Because variable generation resources have near-zero marginal costs, they effectively suppress energy prices and reduce the capacity factors of conventional generators through the merit-order effect in the simplest case of a convex market; non-convexities can also suppress prices.

Plasticity margin recovery during annealing after cold deformation

International Nuclear Information System (INIS)

Bogatov, A.A.; Smirnov, S.V.; Kolmogorov, V.L.

1978-01-01

Restoration of the plasticity margin in steel 20 after cold deformation and annealing at 550 - 750 C and soaking for 5 - 300 min was investigated. The conditions of cold deformation under which the metal acquires microdefects unhealed by subsequent annealing were determined. It was established that if the degree of utilization of the plasticity margin is psi < 0.5, the plasticity margin in steel 20 can be completely restored by annealing. A mathematical model of restoration of the plasticity margin by annealing after cold deformation was constructed. A statistical analysis showed good agreement between model and experiment

Interaction of 2-Gy Equivalent Dose and Margin Status in Perioperative High-Dose-Rate Brachytherapy

International Nuclear Information System (INIS)

Martinez-Monge, Rafael; Cambeiro, Mauricio; Moreno, Marta; Gaztanaga, Miren; San Julian, Mikel; Alcalde, Juan; Jurado, Matias

2011-01-01

Purpose: To determine patient, tumor, and treatment factors predictive of local control (LC) in a series of patients treated with either perioperative high-dose-rate brachytherapy (PHDRB) alone (Group 1) or with PHDRB combined with external-beam radiotherapy (EBRT) (Group 2). Patient and Methods: Patients (n = 312) enrolled in several PHDRB prospective Phase I-II studies conducted at the Clinica Universidad de Navarra were analyzed. Treatment with PHDRB alone, mainly because of prior irradiation, was used in 126 patients to total doses of 32 Gy/8 b.i.d. or 40 Gy/10 b.i.d. treatments after R0 or R1 resections. Treatment with PHDRB plus EBRT was used in 186 patients to total doses of 16 Gy/4 b.i.d. or 24 Gy/6 b.i.d. treatments after R0 or R1 resections along with 45 Gy of EBRT with or without concomitant chemotherapy. Results: No dose-margin interaction was observed in Group 1 patients. In Group 2 patients there was a significant interaction between margin status and 2-Gy equivalent (Eq2Gy) dose (p = 0.002): (1) patients with negative margins had 9-year LC of 95.7% at Eq2Gy = 62.9Gy; (2) patients with close margins of >1 mm had 9-year LC of 92.4% at Eq2Gy = 72.2Gy, and (3) patients with positive/close <1-mm margins had 9-year LC of 68.0% at Eq2Gy = 72.2Gy. Conclusions: Two-gray equivalent doses ≥70 Gy may compensate the effect of close margins ≥1 mm but do not counterbalance the detrimental effect of unfavorable (positive/close <1 mm) resection margins. No dose-margin interaction is observed in patients treated at lower Eq2Gy doses ≤50 Gy with PHDRB alone.

Reinforcing marginality? Maternal health interventions in rural Nicaragua.

Science.gov (United States)

Kvernflaten, Birgit

2017-06-23

To achieve Millennium Development Goal 5 on maternal health, many countries have focused on marginalized women who lack access to care. Promoting facility-based deliveries to ensure skilled birth attendance and emergency obstetric care has become a main measure for preventing maternal deaths, so women who opt for home births are often considered 'marginal' and in need of targeted intervention. Drawing upon ethnographic data from Nicaragua, this paper critically examines the concept of marginality in the context of official efforts to increase institutional delivery amongst the rural poor, and discusses lack of access to health services among women living in peripheral areas as a process of marginalization. The promotion of facility birth as the new norm, in turn, generates a process of 're-marginalization', whereby public health officials morally disapprove of women who give birth at home, viewing them as non-compliers and a problem to the system. In rural Nicaragua, there is a discrepancy between the public health norm and women's own preferences and desires for home birth. These women live at the margins also in spatial and societal terms, and must relate to a health system they find incapable of providing good, appropriate care. Strong public pressure for institutional delivery makes them feel distressed and pressured. Paradoxically then, the aim of including marginal groups in maternal health programmes engenders resistance to facility birth.

Colorado Basin Structure and Rifting, Argentine passive margin

Science.gov (United States)

Autin, Julia; Scheck-Wenderoth, Magdalena; Loegering, Markus; Anka, Zahie; Vallejo, Eduardo; Rodriguez, Jorge; Marchal, Denis; Reichert, Christian; di Primio, Rolando

2010-05-01

The Argentine margin presents a strong segmentation with considerable strike-slip movements along the fracture zones. We focus on the volcanic segment (between the Salado and Colorado transfer zones), which is characterized by seaward dipping reflectors (SDR) all along the ocean-continent transition [e.g. Franke et al., 2006; Gladczenko et al., 1997; Hinz et al., 1999]. The segment is structured by E-W trending basins, which differs from the South African margin basins and cannot be explained by classical models of rifting. Thus the study of the relationship between the basins and the Argentine margin itself will allow the understanding of their contemporary development. Moreover the comparison of the conjugate margins suggests a particular evolution of rifting and break-up. We firstly focus on the Colorado Basin, which is thought to be the conjugate of the well studied Orange Basin [Hirsch et al., 2009] at the South African margin [e.g. Franke et al., 2006]. This work presents results of a combined approach using seismic interpretation and structural, isostatic and thermal modelling highlighting the structure of the crust. The seismic interpretation shows two rift-related discordances: one intra syn-rift and the break-up unconformity. The overlying sediments of the sag phase are less deformed (no sedimentary wedges) and accumulated before the generation of oceanic crust. The axis of the Colorado Basin trends E-W in the western part, where the deepest pre-rift series are preserved. In contrast, the basin axis turns to a NW-SE direction in its eastern part, where mainly post-rift sediments accumulated. The most distal part reaches the margin slope and opens into the oceanic basin. The general basin direction is almost orthogonal to the present-day margin trend. The most frequent hypothesis explaining this geometry is that the Colorado Basin is an aborted rift resulting from a previous RRR triple junction [e.g. Franke et al., 2002]. The structural interpretation

Improving safety margin of LWRs by rethinking the emergency core cooling system criteria and safety system capacity

Energy Technology Data Exchange (ETDEWEB)

Lee, Youho, E-mail: euo@kaist.ac.kr; Kim, Bokyung, E-mail: bkkim2@kaist.ac.kr; NO, Hee Cheon, E-mail: hcno@kaist.ac.kr

2016-10-15

Highlights: • Zircaloy embrittlement criteria can increase to 1370 °C for CP-ECR lower than 13%. • The draft ECCS criteria of U.S. NRC allow less than 5% in power margin. • The Japanese fracture-based criteria allow around 5% in power margin. • Increasing SIT inventory is effective in assuring safety margin for power uprates. - Abstract: This study investigates the engineering compatibility between emergency core cooling system criteria and safety water injection systems, in the pursuit of safety margin increase of light water reactors. This study proposes an acceptable temperature increase to 1370 °C as long as equivalent cladding reacted calculated by the Cathcart–Pawel equation is below 13%, after an extensive literature review. The influence of different ECCS criteria on the safety margin during large break loss of coolant accident is investigated for OPR-1000 by the system code MARS-KS, implemented with the KINS-REM method. The fracture-based emergency core cooling system (ECCS) criteria proposed in this study are shown to enable power margins up to 10%. In the meantime, the draft U.S. NRC’s embrittlement criteria (burnup-sensitive) and Japanese fracture-based criteria are shown to allow less than 5%, and around 5% of power margins, respectively. Increasing safety injection tank (SIT) water inventory is the key, yet convenient, way of assuring safety margin for power increase. More than 20% increase in the SIT water inventory is required to allow 15% power margins, for the U.S. NRC’s burnup-dependent embrittlement criteria. Controlling SIT water inventory would be a useful option that could allow the industrial desire to pursue power margins even under the recent atmosphere of imposing stricter ECCS criteria for the considerable burnup effects.

Inadvertent chest tube insertion in congenital cystic adenomatoid malformation and congenital lobar emphysema-highlighting an important problem

International Nuclear Information System (INIS)

Prabhu, Shailesh M; Choudhury, Subhasis Roy; Solanki, Ravi S; Shetty, Gurucharan S; Agarwala, Surenderkumar

2013-01-01

Chest tube insertion in congenital cystic lung lesions is an important problem in children with acute respiratory distress having a cystic lucent lesion on chest radiograph. To evaluate the imaging findings and complications in cases of congenital cystic lung lesions with chest tube insertion and suggest the role of appropriate imaging for management of these patients. Chest radiographs and CT scans of children with congenital cystic lung lesions who had inadvertent chest tube insertion preoperatively were retrospectively reviewed for imaging appearances and complications. Fifteen patients comprising 10 cases of congenital cystic adenomatoid malformation (CCAM) and 5 cases of congenital lobar emphysema (CLE) were included. Majority of the cases were infants. CCAM was misdiagnosed as complicated pneumatocele (n = 5) and pneumothorax (n = 5), while CLE was misdiagnosed as tension pneumothorax (n = 5) on the chest radiograph findings. Final diagnosis was made on CT and operative findings with histopathology. Complications noted were pneumothorax, hydropneumothorax, and infection in cases of CCAM, and change in imaging appearance and pneumothorax in cases of CLE. Chest tube insertion in congenital cystic lesions increases the rate of associated complications. Chest CT has a definite role in early diagnosis and deciding appropriate management in these cases

The Seismicity of Two Hyperextended Margins

Science.gov (United States)

Redfield, Tim; Terje Osmundsen, Per

2013-04-01

A seismic belt marks the outermost edge of Scandinavia's proximal margin, inboard of and roughly parallel to the Taper Break. A similar near- to onshore seismic belt runs along its inner edge, roughly parallel to and outboard of the asymmetric, seaward-facing escarpment. The belts converge at both the northern and southern ends of Scandinavia, where crustal taper is sharp and the proximal margin is narrow. Very few seismic events have been recorded on the intervening, gently-tapering Trøndelag Platform. Norway's distribution of seismicity is systematically ordered with respect to 1) the structural templates of high-beta extension that shaped the thinning gradient during Late Jurassic or Early Cretaceous time, and 2) the topographically resurgent Cretaceous-Cenozoic "accommodation phase" family of escarpments that approximate the innermost limit of crustal thinning [See Redfield and Osmundsen (2012) for diagrams, definitions, discussion, and supporting citations.] Landwards from the belt of earthquake epicenters that mark the Taper Break the crust consistently thickens, and large fault arrays tend to sole out at mid crustal levels. Towards the sea the crystalline continental crust is hyperextended, pervasively faulted, and generally very thin. Also, faulting and serpentinization may have affected the uppermost parts of the distal margin's lithospheric mantle. Such contrasting structural conditions may generate a contrasting stiffness: for a given stress, more strain can be accommodated in the distal margin than in the less faulted proximal margin. By way of comparison, inboard of the Taper Break on the gently-tapered Trøndelag Platform, faulting was not penetrative. There, similar structural conditions prevail and proximal margin seismicity is negligible. Because stress concentration can occur where material properties undergo significant contrast, the necking zone may constitute a natural localization point for post-thinning phase earthquakes. In Scandinavia

The Marginal Source of Finance

OpenAIRE

Lindhe, Tobias

2002-01-01

This paper addresses the ongoingdebate on which view of equity, traditional or new, that best describes firm behavior. According to the traditional view, the marginal source of finance is new equity, whereas under to the new view, marginal financing comes from retained earnings. In the theoretical part, we set up a model where the firm faces a cost of adjusting the dividend level because of an aggravated free cash flow problem. The existence of such a cost - which has been used in arguing the...

Do Medicare Advantage Plans Select Enrollees in Higher Margin Clinical Categories?

Science.gov (United States)

Newhouse, Joseph P.; McWilliams, J. Michael; Price, Mary; Huang, Jie; Fireman, Bruce; Hsu, John

2013-01-01

The CMS-HCC risk adjustment system for Medicare Advantage (MA) plans calculates weights, which are effectively relative prices, for beneficiaries with different observable characteristics. To do so it uses the relative amounts spent per beneficiary with those characteristics in Traditional Medicare (TM). For multiple reasons one might expect relative amounts in MA to differ from TM, thereby making some beneficiaries more profitable to treat than others. Much of the difference comes from differences in how TM and MA treat different diseases or diagnoses. Using data on actual medical spending from two MA-HMO plans, we show that the weights calculated from MA costs do indeed differ from those calculated using TM spending. One of the two plans (Plan 1) is more typical of MA-HMO plans in that it contracts with independent community providers, while the other (Plan 2) is vertically integrated with care delivery. We calculate margins, or Average Revenue/Average Cost, for Medicare beneficiaries in the two plans who have one of 48 different combinations of medical conditions. The two plans’ margins for these 48 conditions are correlated (r=0.39, pincentive for selection by HCC. Nonetheless, we find no evidence of overrepresentation of beneficiaries in high margin HCC’s in either plan. Nor, using the margins from Plan 1, the more typical plan, do we find evidence of overrepresentation of high margin HCC’s in Medicare more generally. These results do not permit a conclusion on overall social efficiency, but we note that selection according to margin could be socially efficient. In addition, our findings suggest there are omitted interaction terms in the risk adjustment model that Medicare currently uses. PMID:24308879

On probabilistically defined margins in radiation therapy

Energy Technology Data Exchange (ETDEWEB)

Papiez, Lech; Langer, Mark [Department of Radiation Oncology, Indiana University, Indianapolis, IN (United States)

2006-08-21

Margins about a target volume subject to external beam radiation therapy are designed to assure that the target volume of tissue to be sterilized by treatment is adequately covered by a lethal dose. Thus, margins are meant to guarantee that all potential variation in tumour position relative to beams allows the tumour to stay within the margin. Variation in tumour position can be broken into two types of dislocations, reducible and irreducible. Reducible variations in tumour position are those that can be accommodated with the use of modern image-guided techniques that derive parameters for compensating motions of patient bodies and/or motions of beams relative to patient bodies. Irreducible variations in tumour position are those random dislocations of a target that are related to errors intrinsic in the design and performance limitations of the software and hardware, as well as limitations of human perception and decision making. Thus, margins in the era of image-guided treatments will need to accommodate only random errors residual in patient setup accuracy (after image-guided setup corrections) and in the accuracy of systems designed to track moving and deforming tissues of the targeted regions of the patient's body. Therefore, construction of these margins will have to be based on purely statistical data. The characteristics of these data have to be determined through the central limit theorem and Gaussian properties of limiting error distributions. In this paper, we show how statistically determined margins are to be designed in the general case of correlated distributions of position errors in three-dimensional space. In particular, we show how the minimal margins for a given level of statistical confidence are found. Then, how they are to be used to determine geometrically minimal PTV that provides coverage of GTV at the assumed level of statistical confidence. Our results generalize earlier recommendations for statistical, central limit theorem

On probabilistically defined margins in radiation therapy

International Nuclear Information System (INIS)

Papiez, Lech; Langer, Mark

2006-01-01

Margins about a target volume subject to external beam radiation therapy are designed to assure that the target volume of tissue to be sterilized by treatment is adequately covered by a lethal dose. Thus, margins are meant to guarantee that all potential variation in tumour position relative to beams allows the tumour to stay within the margin. Variation in tumour position can be broken into two types of dislocations, reducible and irreducible. Reducible variations in tumour position are those that can be accommodated with the use of modern image-guided techniques that derive parameters for compensating motions of patient bodies and/or motions of beams relative to patient bodies. Irreducible variations in tumour position are those random dislocations of a target that are related to errors intrinsic in the design and performance limitations of the software and hardware, as well as limitations of human perception and decision making. Thus, margins in the era of image-guided treatments will need to accommodate only random errors residual in patient setup accuracy (after image-guided setup corrections) and in the accuracy of systems designed to track moving and deforming tissues of the targeted regions of the patient's body. Therefore, construction of these margins will have to be based on purely statistical data. The characteristics of these data have to be determined through the central limit theorem and Gaussian properties of limiting error distributions. In this paper, we show how statistically determined margins are to be designed in the general case of correlated distributions of position errors in three-dimensional space. In particular, we show how the minimal margins for a given level of statistical confidence are found. Then, how they are to be used to determine geometrically minimal PTV that provides coverage of GTV at the assumed level of statistical confidence. Our results generalize earlier recommendations for statistical, central limit theorem

Improved Safety Margin Characterization of Risk from Loss of Offsite Power

Energy Technology Data Exchange (ETDEWEB)

Nelson, Paul [Texas A & M Univ., College Station, TX (United States)

2017-11-07

Original intent: The original intent of this task was “support of the Risk-Informed Safety Margin Characteristic (RISMC) methodology in order” “to address … efficiency of computation so that more accurate and cost-effective techniques can be used to address safety margin characterizations” (S. M. Hess et al., “Risk-Informed Safety Margin Characterization,” Procs. ICONE17, Brussels, July 2009, CD format). It was intended that “in Task 1 itself this improvement will be directed toward upon the very important issue of Loss of Offsite Power (LOOP) events,” more specifically toward the challenge of efficient computation of the multidimensional nonrecovery integral that has been discussed by many previous contributors to the theory of nuclear safety. It was further envisioned that “three different computational approaches will be explored,” corresponding to the three subtasks listed below; deliverables were tied to the individual subtasks.

Marginal longitudinal semiparametric regression via penalized splines

KAUST Repository

Al Kadiri, M.

2010-08-01

We study the marginal longitudinal nonparametric regression problem and some of its semiparametric extensions. We point out that, while several elaborate proposals for efficient estimation have been proposed, a relative simple and straightforward one, based on penalized splines, has not. After describing our approach, we then explain how Gibbs sampling and the BUGS software can be used to achieve quick and effective implementation. Illustrations are provided for nonparametric regression and additive models.

Marginal longitudinal semiparametric regression via penalized splines

KAUST Repository

Al Kadiri, M.; Carroll, R.J.; Wand, M.P.

2010-01-01

We study the marginal longitudinal nonparametric regression problem and some of its semiparametric extensions. We point out that, while several elaborate proposals for efficient estimation have been proposed, a relative simple and straightforward one, based on penalized splines, has not. After describing our approach, we then explain how Gibbs sampling and the BUGS software can be used to achieve quick and effective implementation. Illustrations are provided for nonparametric regression and additive models.

The homogeneous marginal utility of income assumption

NARCIS (Netherlands)

Demuynck, T.

2015-01-01

We develop a test to verify if every agent from a population of heterogeneous consumers has the same marginal utility of income function. This homogeneous marginal utility of income assumption is often (implicitly) used in applied demand studies because it has nice aggregation properties and

Optimal Patient Positioning (Prone Versus Supine) for VMAT in Gynecologic Cancer: A Dosimetric Study on the Effect of Different Margins

Energy Technology Data Exchange (ETDEWEB)

Heijkoop, Sabrina T., E-mail: s.heijkoop@erasmusmc.nl [Department of Radiation Oncology, Erasmus MC Cancer Institute, Rotterdam (Netherlands); Westerveld, Henrike; Bijker, Nina [Department of Radiation Oncology, Academic Medical Center, Amsterdam (Netherlands); Feije, Raphael; Sharfo, Abdul W. [Department of Radiation Oncology, Erasmus MC Cancer Institute, Rotterdam (Netherlands); Wieringen, Niek van [Department of Radiation Oncology, Academic Medical Center, Amsterdam (Netherlands); Mens, Jan Willem M. [Department of Radiation Oncology, Erasmus MC Cancer Institute, Rotterdam (Netherlands); Stalpers, Lukas J.A. [Department of Radiation Oncology, Academic Medical Center, Amsterdam (Netherlands); Hoogeman, Mischa S. [Department of Radiation Oncology, Erasmus MC Cancer Institute, Rotterdam (Netherlands)

2016-10-01

Purpose/Objective: It is unknown whether the historically found dosimetric advantages of treating gynecologic cancer with the patient in a prone position with use of a small-bowel displacement device (belly-board) remain when volumetric arc therapy (VMAT) is used and whether these advantages depend on the necessary margin between clinical target volume (CTV) and planning target volume (PTV). The aim of this study is to determine the best patient position (prone or supine) in terms of sparing organs at risk (OAR) for various CTV-to-PTV margins and VMAT dose delivery. Methods and Materials: In an institutional review board—approved study, 26 patients with gynecologic cancer scheduled for primary (9) or postoperative (17) radiation therapy were scanned in a prone position on a belly-board and in a supine position on the same day. The primary tumor CTV, nodal CTV, bladder, bowel, and rectum were delineated on both scans. The PTVs were created each with a different margin for the primary tumor and nodal CTV. The VMAT plans were generated with our in-house system for automated treatment planning. For all margin combinations, the supine and prone plans were compared with consideration of all OAR dose-volume parameters but with highest priority given to bowel cavity V{sub 45Gy} (cm{sup 3}). Results: For both groups, the prone position reduced the bowel cavity V{sub 45Gy}, in particular for nodal margins ≥10 mm (ΔV{sub 45Gy} = 23.9 ± 10.6 cm{sup 3}). However, for smaller margins, the advantage was much less pronounced (ΔV{sub 45Gy} = 6.5 ± 3.0 cm{sup 3}) and did not reach statistical significance. The rectum mean dose (D{sub mean}) was significantly lower (ΔD{sub mean} = 2.5 ± 0.3 Gy) in the prone position for both patient groups and for all margins, and the bladder D{sub mean} was significantly lower in the supine position (ΔD{sub mean} = 2.6 ± 0.4 Gy) only for the postoperative group. The advantage of the prone position was not present if it

Re-excision of margins before breast radiation-diagnostic or therapeutic?

International Nuclear Information System (INIS)

Chism, Derek B.; Freedman, Gary M.; Li, Tianyu; Anderson, Penny R.

2006-01-01

Purpose: To identify factors in breast cancer patients that predict the pathologic results of re-excision for close or positive margins and to determine the effect on local control. Methods and Materials: We divided 1,044 patients with Stage I-II breast cancer with a close (≤2 mm) or positive margin after initial excision into three groups. Group 1 included 199 patients without additional excision, Group 2 included 546 patients with re-excision found to be free of cancer, and Group 3 included 299 patients with re-excision and residual cancer. All patients were treated with radiotherapy with a median follow-up of 6.7 years. Results: The 10-year local control rate was 95% for Group 1 and 94% for Groups 2 and 3 (p = 0.788). Of the 846 patients, 65% had no residual disease on re-excision and 35% did have residual tumor. The factors significantly associated with positive re-excision findings were initial positive margins, positive nodes, Stage T2 tumor, and an extensive intraductal component. The 10-year local control rate was 95% for Group 2 vs. 91% for Group 3 (p = 0.038). Conclusion: The low recurrence rates seen in this study suggest that selected patients with non-negative margins, particularly those with a low risk of having residual disease at re-excision, may be treated with radiotherapy

Intentional, Inadvertent, or Inevitable? James Burrill Angell and Secularization at the University of Michigan.

Science.gov (United States)

Bouman, Jeffrey Paul

The history of James Burrill Angell as the president of the University of Michigan presents a case study of the role of 19th century liberal Protestant university builders in the eventual marginalization of religion from the mainstream of U.S. higher education. Angell's tenure, which began in 1871, encompassed the period in which the modern…

Impact of Close and Positive Margins in Transoral Laser Microsurgery for Tis–T2 Glottic Cancer

Directory of Open Access Journals (Sweden)

Ivana Fiz

2017-10-01

Full Text Available IntroductionTransoral laser microsurgery (TLM represents one of the most effective treatment strategies for Tis–T2 glottic squamous cell carcinomas (SCC. The prognostic influence of close/positive margins is still debated, and the role of narrow band imaging (NBI in their intraoperative definition is still to be validated on large cohort of patients. This study analyzed the influence of margin status on recurrence-free survival (RFS and disease-specific survival (DSS.MethodsWe retrospectively studied 507 cases of pTis–T1b (Group A and 127 cases of pT2 (Group B glottic SCC. We identified the following margin status: negative (n = 232, close superficial (n = 79, close deep (CD (n = 35, positive single superficial (n = 146, positive multiple superficial (n = 94, and positive deep (n = 48 and analyzed their impact on RFS and DSS. Close margins were defined by tumor-margin distance <1 mm. Pre-TLM margins were defined by white light in 323 patients, whereas NBI was employed in 311 patients.ResultsIn Group A, DSS and RFS were reduced in positive multiple superficial and positive deep margins (DSS = 96.1 and 97%, both p < 0.05; RFS = 72%, p < 0.001 and 75.8%, p < 0.01. In Group B, DSS was reduced in positive multiple superficial margins (82.4%, p < 0.05. RFS was reduced in positive single superficial, positive multiple superficial, and positive deep margins (62.5, 41.2, and 53.3%, p < 0.01. In the entire population, RFS was reduced in CD margins (77.1%, p < 0.05. Use of NBI led to improvement in RFS and DSS.ConclusionThe study indicates that close and positive single superficial margins do not affect DSS. By contrast, all types of margin positivity predict the occurrence of relapses, albeit with different likelihood, depending on stage/margin type. CD margins should be considered as a single risk factor. Use of NBI granted better intraoperative margins definition.

Effect of power toothbrushing on simulated wear of dental cement margins.

Science.gov (United States)

Black, Marsha A; Bayne, Stephen C; Peterson, Charlotte A

2007-01-01

Power toothbrushes (PTBs), in combination with abrasive dentifrices, may encourage wear of dental cements at crown margins. The objective of this in vitro simulation was to control the clinical variables associated with PTB use and measure the potential side effects of PTBs with mild and abrasive dentifrices. Four PTBs ( Braun-Oral-B-Professional Care at 150 g brushing force, Sonicare-Elite at 90 g, Colgate-Actibrush at 200 g and Crest-Spinbrush-Pro at 250 g) and 2 dentifrices mixed 1:1 with tap water (Mild= Colgate-Total, Colgate-Palmolive; Abrasive= Close-up, Chesebrough-Ponds) versus tap water alone (control) were used to abrade 2 cements (Fleck's Mizzy Zinc Phosphate [ZP]; 3M-ESPE Unicem universal cement [UC]) using cement-filled slots (160 m wide) cut into wear-resistant ceramic blocks. A custom fixture controlled PTB/block alignment, PTB loads, and other testing variables. Wear was measured (3 profilometer traces/slot, 5 slots/block/group, baseline to 5-year differences) and analyzed (3-way ANOVA, p PTBs and both dentifrices. Brushing with water showed no effects (pPTBs. Pooled 5y-wear levels for ZP for both dentifrices approximately 21 microm /5y) were similar to values for current-day posterior composite materials. Combinations of PTBs with mild and abrasive dentifrices produced significant wear with ZP but not UC; thus, resin-composite cements seem to represent a better choice for wear resistance.

Evaluation of margining algorithms in commercial treatment planning systems

International Nuclear Information System (INIS)

Pooler, Alistair M.; Mayles, Helen M.; Naismith, Olivia F.; Sage, John P.; Dearnaley, David P.

2008-01-01

Introduction: During commissioning of the Pinnacle (Philips) treatment planning system (TPS) the margining algorithm was investigated and was found to produce larger PTVs than Plato (Nucletron) for identical GTVs. Subsequent comparison of PTV volumes resulting from the QA outlining exercise for the CHHIP (Conventional or Hypofractionated High Dose IMRT for Prostate Ca.) trial confirmed that there were differences in TPS's margining algorithms. Margining and the clinical impact of the different PTVs in seven different planning and virtual simulation systems (Pinnacle, Plato, Prosoma (MedCom), Eclipse (7.3 and 7.5) (Varian), MasterPlan (Nucletron), Xio (CMS) and Advantage Windows (AW) (GE)) is investigated, and a simple test for 3D margining consistency is proposed. Methods: Using each TPS, two different sets of prostate GTVs on 2.5 mm and 5 mm slices were margined according to the CHHIP protocol to produce PTV3 (prostate + 5 mm/0 mm post), PTV2 (PTV3 + 5 mm) and PTV1 (prostate and seminal vesicles + 10 mm). GTVs and PTVs were imported into Pinnacle for volume calculation. DVHs for 5 mm slice plans, created using the smallest PTVs, were recalculated on the largest PTV dataset and vice versa. Since adding a margin of 50 mm to a structure should give the same result as adding five margins of 10 mm, this was tested for each TPS (consistency test) using an octahedron as the GTV and CT datasets with 2.5 mm and 5 mm slices. Results: The CHHIP PTV3 and PTV1 volumes had a standard deviation, across the seven systems, of 5% and PTV2 (margined twice) 9%, on the 5 mm slices. For 2.5 mm slices the standard deviations were 4% and 6%. The ratio of the Pinnacle and the Eclipse 7.3 PTV2 volumes was 1.25. Rectal doses were significantly increased when encompassing Pinnacle PTVs (V 50 42.8%), compared to Eclipse 7.3 PTVs (V 50 = 36.4%). Conversely, fields that adequately treated an Eclipse 7.3 PTV2 were inadequate for a Pinnacle PTV2. AW and Plato PTV volumes were the most consistent

An Investigation of Rotorcraft Stability-Phase Margin Requirements in Hover

Science.gov (United States)

Blanken, Chris L.; Lusardi, Jeff A.; Ivler, Christina M.; Tischler, Mark B.; Hoefinger, Marc T.; Decker, William A.; Malpica, Carlos A.; Berger, Tom; Tucker, George E.

2009-01-01

A cooperative study was performed to investigate the handling quality effects from reduced flight control system stability margins, and the trade-offs with higher disturbance rejection bandwidth (DRB). The piloted simulation study, perform on the NASA-Ames Vertical Motion Simulator, included three classes of rotorcraft in four configurations: a utility-class helicopter; a medium-lift helicopter evaluated with and without an external slung load; and a large (heavy-lift) civil tiltrotor aircraft. This large aircraft also allowed an initial assessment of ADS-33 handling quality requirements for an aircraft of this size. Ten experimental test pilots representing the U.S. Army, Marine Corps, NASA, rotorcraft industry, and the German Aerospace Center (DLR), evaluated the four aircraft configurations, for a range of flight control stability-margins and turbulence levels, while primarily performing the ADS-33 Hover and Lateral Reposition MTEs. Pilot comments and aircraft-task performance data were analyzed. The preliminary stability margin results suggest higher DRB and less phase margin cases are preferred as the aircraft increases in size. Extra care will need to be taken to assess the influence of variability when nominal flight control gains start with reduced margins. Phase margins as low as 20-23 degrees resulted in low disturbance-response damping ratios, objectionable oscillations, PIO tendencies, and a perception of an incipient handling qualities cliff. Pilot comments on the disturbance response of the aircraft correlated well to the DRB guidelines provided in the ADS-33 Test Guide. The A D-3S3 mid-term response-to-control damping ratio metrics can be measured and applied to the disturbance-response damping ratio. An initial assessment of LCTR yaw bandwidth shows the current Level 1 boundary needs to be relaxed to help account for a large pilot off-set from the c.g. Future efforts should continue to investigate the applicability/refinement of the current ADS-33

Effect of dual-cure composite resin as restorative material on marginal adaptation of class 2 restorations.

Science.gov (United States)

Bortolotto, Tissiana; Melian, Karla; Krejci, Ivo

2013-10-01

The present study attempted to find a simple direct adhesive restorative technique for the restoration of Class 2 cavities. A self-etch adhesive system with a dual-cured core buildup composite resin (paste 1 + paste 2) was evaluated in its ability to restore proximo-occlusal cavities with margins located on enamel and dentin. The groups were: A, cavity filling (cf) with paste 1 (light-curing component) by using a layering technique; B, cf by mixing both pastes, bulk insertion, and dual curing; and C, cf by mixing both pastes, bulk insertion, and chemical curing. Two control groups (D, negative, bulk; and E, positive, layering technique) were included by restoring cavities with a classic three-step etch-and-rinse adhesive and a universal restorative composite resin. SEM margin analysis was performed before and after thermomechanical loading in a chewing simulator. Percentages (mean ± SD) of "continuous margins" were improved by applying the material in bulk and letting it self cure (54 ± 6) or dual cure (59 ± 9), and no significant differences were observed between these two groups and the positive control (44 ± 19). The present study showed that the dual-cured composite resin tested has the potential to be used as bulk filling material for Class 2 restorations. When used as filling materials, dual-cure composite resins placed in bulk can provide marginal adaptation similar to light-cured composites applied with a complex stratification technique.

Single-Center Experience Using Marginal Liver Grafts in Korea.

Science.gov (United States)

Park, P-J; Yu, Y-D; Yoon, Y-I; Kim, S-R; Kim, D-S

2018-05-01

Liver transplantation (LT) is an established therapeutic modality for patients with end-stage liver disease. The use of marginal donors has become more common worldwide due to the sharp increase in recipients, with a consequent shortage of suitable organs. We analyzed our single-center experience over the last 8 years in LT to evaluate the outcomes of using so-called "marginal donors." We retrospectively analyzed the database of all LTs performed at our institution from 2009 to 2017. Only patients undergoing deceased-donor LTs were analyzed. Marginal grafts were defined as livers from donors >60 years of age, livers from donors with serum sodium levels >155 mEq, graft steatosis >30%, livers with cold ischemia time ≥12 hours, livers from donors who were hepatitis B or C virus positive, livers recovered from donation after cardiac death, and livers split between 2 recipients. Patients receiving marginal grafts (marginal group) were compared with patients receiving standard grafts (standard group). A total of 106 patients underwent deceased-donor LT. There were 55 patients in the standard group and 51 patients in the marginal group. There were no significant differences in terms of age, sex, Model for End-Stage Liver Disease score, underlying liver disease, presence of hepatocellular carcinoma, and hospital stay between the 2 groups. Although the incidence of acute cellular rejection, cytomegalovirus infection, and postoperative complications was similar between the 2 groups, the incidence of early allograft dysfunction was higher in the marginal group. With a median follow-up of 26 months, the 1-, 3-, and 5-year overall and graft (death-censored) survivals in the marginal group were 85.5%, 75%, and 69.2% and 85.9%, 83.6%, and 77.2%, respectively. Patient overall survival and graft survival (death-censored) were significantly lower in the marginal group (P = .023 and P = .048, respectively). On multivariate analysis, receiving a marginal graft (hazard ratio [HR

The marginal cost of public funds

DEFF Research Database (Denmark)

Kleven, Henrik Jacobsen; Kreiner, Claus Thustrup

2006-01-01

This paper extends the theory and measurement of the marginal cost of public funds (MCF) to account for labor force participation responses. Our work is motivated by the emerging consensus in the empirical literature that extensive (participation) responses are more important than intensive (hours...... of work) responses. In the modelling of extensive responses, we argue that it is crucial to account for the presence of non-convexities created by fixed work costs. In a non-convex framework, tax and transfer reforms give rise to discrete participation responses generating first-order effects...

Absenteeism, efficiency wages, and marginal taxes

OpenAIRE

Dale-Olsen, Harald

2013-01-01

In this paper, I test the argument that increased taxes on earnings correspond to increased incentives to shirk, thus causing an increase in the rate of worker absenteeism. After fixed job effects are taken into account, panel register data on prime-age Norwegian males who work full-time show that a higher marginal net-of-earnings-tax rate reduces the rate of absenteeism. When the net-of-tax rate is increased by 1.0 percent, absenteeism decreases by 0.3−0.5 percent. Injury-related absences ar...

Marginal-cost pricing for Hydro-Quebec residential customers

International Nuclear Information System (INIS)

Paquin, C.

1994-02-01

An option available to governments and to utilities such as Hydro-Quebec for responding to objectives of energy efficiency is the adoption of marginal cost pricing. Compared to currently used price structures, marginal cost pricing will allow improvement of price signals and assure an optimal utilization of the resource. That type of pricing could be economically beneficial but may not be desirable from the point of view of revenue distribution. Taking account of Hydro-Quebec's cost structure, pure marginal cost pricing would generate an income that would be strongly contested on equity grounds. For example, it would raise prices 60% for residential customers. Faced with this possibility, an analysis is presented of the impact of a peak-offpeak pricing (or pure marginal cost pricing) on Hydro-Quebec's residential customer energy bills. The marginal costs of Hydro-Quebec are calculated by the method of Bernard and Chatel (1985) and analysis of the results is based on Friedman and Weare (1993). A sample of 28,417 residential customers from a 1989 Hydro-Quebec survey is used in the study. Two scenarios are analyzed; the first allowing comparison of the energy bill only on the basis of marginal costs and of average costs, and the second allowing comparison of the impact of marginal cost pricing on the total bill. In the first scenario, the impact translates into a 31% increase in energy bills for the entire customer class considered; in addition, this impact is inversely proportional to the revenue class. In the second scenario, the increase is 24%. 33 refs., 10 figs., 53 tabs

Aggregate Settling Velocities in San Francisco Estuary Margins

Science.gov (United States)

Allen, R. M.; Stacey, M. T.; Variano, E. A.

2015-12-01

One way that humans impact aquatic ecosystems is by adding nutrients and contaminants, which can propagate up the food web and cause blooms and die-offs, respectively. Often, these chemicals are attached to fine sediments, and thus where sediments go, so do these anthropogenic influences. Vertical motion of sediments is important for sinking and burial, and also for indirect effects on horizontal transport. The dynamics of sinking sediment (often in aggregates) are complex, thus we need field data to test and validate existing models. San Francisco Bay is well studied and is often used as a test case for new measurement and model techniques (Barnard et al. 2013). Settling velocities for aggregates vary between 4*10-5 to 1.6*10-2 m/s along the estuary backbone (Manning and Schoellhamer 2013). Model results from South San Francisco Bay shoals suggest two populations of settling particles, one fast (ws of 9 to 5.8*10-4 m/s) and one slow (ws of Brand et al. 2015). While the open waters of San Francisco Bay and other estuaries are well studied and modeled, sediment and contaminants often originate from the margin regions, and the margins remain poorly characterized. We conducted a 24 hour field experiment in a channel slough of South San Francisco Bay, and measured settling velocity, turbulence and flow, and suspended sediment concentration. At this margin location, we found average settling velocities of 4-5*10-5 m/s, and saw settling velocities decrease with decreasing suspended sediment concentration. These results are consistent with, though at the low end of, those seen along the estuary center, and they suggest that the two population model that has been successful along the shoals may also apply in the margins.

How to make offshore marginal fields work for everyone

International Nuclear Information System (INIS)

Blandford, P.R.

1995-01-01

Marginal fields make positive impact on certain oil and gas companies' financial performances. These developments are integrated into the operator's operational and philosophical mindset, so that they optimize return and establish a reasonable reserve base for the company. Having a portfolio of marginal field developments is definitely a part of the offshore business, and oil field suppliers and subcontractors will continue to develop technology and methods to ensure the fields are exploited. It goes without saying that the continued production of marginal fields helps a lot of consumers and the companies that make up the energy chain that gets it to them. There are marginal fields all over the world and the market can only grow as more and more of the resources decline and industrialization expands demand. The projections for 2020 state that fossil fuels will remain the major supply link to dependable and affordable energy, particularly as additional oil and gas infrastructures are built and installed. Likened to the commodity, oil and gas companies and the energy industry have slowly evolved to the point where they are making a difference for people worldwide. As long as there is product to produce, most companies and consumers do not really care what type of reservoir started it all. More often then not, it probably started out as a marginal prospect. The paper discusses the energy picture today, marginal field update, offshore marginal field geography, and independent and marginal field developments

Exploring the Subtleties of Inverse Probability Weighting and Marginal Structural Models.

Science.gov (United States)

Breskin, Alexander; Cole, Stephen R; Westreich, Daniel

2018-05-01

Since being introduced to epidemiology in 2000, marginal structural models have become a commonly used method for causal inference in a wide range of epidemiologic settings. In this brief report, we aim to explore three subtleties of marginal structural models. First, we distinguish marginal structural models from the inverse probability weighting estimator, and we emphasize that marginal structural models are not only for longitudinal exposures. Second, we explore the meaning of the word "marginal" in "marginal structural model." Finally, we show that the specification of a marginal structural model can have important implications for the interpretation of its parameters. Each of these concepts have important implications for the use and understanding of marginal structural models, and thus providing detailed explanations of them may lead to better practices for the field of epidemiology.

Effect of Smaller Left Ventricular Capture Threshold Safety Margins to Improve Device Longevity in Recipients of Cardiac Resynchronization-Defibrillation Therapy.

Science.gov (United States)

Steinhaus, Daniel A; Waks, Jonathan W; Collins, Robert; Kleckner, Karen; Kramer, Daniel B; Zimetbaum, Peter J

2015-07-01

Device longevity in cardiac resynchronization therapy (CRT) is affected by the pacing capture threshold (PCT) and programmed pacing amplitude of the left ventricular (LV) pacing lead. The aims of this study were to evaluate the stability of LV pacing thresholds in a nationwide sample of CRT defibrillator recipients and to determine potential longevity improvements associated with a decrease in the LV safety margin while maintaining effective delivery of CRT. CRT defibrillator patients in the Medtronic CareLink database were eligible for inclusion. LV PCT stability was evaluated using ≥2 measurements over a 14-day period. Separately, a random sample of 7,250 patients with programmed right atrial and right ventricular amplitudes ≤2.5 V, LV thresholds ≤ 2.5 V, and LV pacing ≥90% were evaluated to estimate theoretical battery longevity improvement using LV safety margins of 0.5 and 1.5 V. Threshold stability analysis in 43,256 patients demonstrated LV PCT stability of 1 V had the greatest increases in battery life (mean increase 0.86 years, 95% confidence interval 0.85 to 0.87). In conclusion, nearly all CRT defibrillator patients had LV PCT stability <1.0 V. Decreasing the LV safety margin from 1.5 to 0.5 V provided consistent delivery of CRT for most patients and significantly improved battery longevity. Copyright © 2015 Elsevier Inc. All rights reserved.

Values and marginal preferences in international business

NARCIS (Netherlands)

Maseland, Robbert; van Hoorn, Andre

2010-01-01

In a recent paper in this journal, Maseland and van Hoorn argued that values surveys tend to conflate values and marginal preferences. This assertion has been challenged by Brewer and Venaik, who claim that the wording of most survey items does not suggest that these elicit marginal preferences.

Safety analysis of increase in heat removal from reactor coolant system with inadvertent operation of passive residual heat removal at no load conditions

Energy Technology Data Exchange (ETDEWEB)

Shao, Ge; Cao, Xuewu [School of Mechanical and Engineering, Shanghai Jiao Tong University, Shanghai (China)

2015-06-15

The advanced passive pressurized water reactor (PWR) is being constructed in China and the passive residual heat removal (PRHR) system was designed to remove the decay heat. During accident scenarios with increase of heat removal from the primary coolant system, the actuation of the PRHR will enhance the cooldown of the primary coolant system. There is a risk of power excursion during the cooldown of the primary coolant system. Therefore, it is necessary to analyze the thermal hydraulic behavior of the reactor coolant system (RCS) at this condition. The advanced passive PWR model, including major components in the RCS, is built by SCDAP/RELAP5 code. The thermal hydraulic behavior of the core is studied for two typical accident sequences with PRHR actuation to investigate the core cooling capability with conservative assumptions, a main steam line break (MSLB) event and inadvertent opening of a steam generator (SG) safety valve event. The results show that the core is ultimately shut down by the boric acid solution delivered by Core Makeup Tank (CMT) injections. The effects of CMT boric acid concentration and the activation delay time on accident consequences are analyzed for MSLB, which shows that there is no consequential damage to the fuel or reactor coolant system in the selected conditions.

Orogenic structural inheritance and rifted passive margin formation

Science.gov (United States)

Salazar Mora, Claudio A.; Huismans, Ritske S.

2016-04-01

Structural inheritance is related to mechanical weaknesses in the lithosphere due to previous tectonic events, e.g. rifting, subduction and collision. The North and South Atlantic rifted passive margins that formed during the breakup of Western Gondwana, are parallel to the older Caledonide and the Brasiliano-Pan-African orogenic belts. In the South Atlantic, 'old' mantle lithospheric fabric resulting from crystallographic preferred orientation of olivine is suggested to play a role during rifted margin formation (Tommasi and Vauchez, 2001). Magnetometric and gravimetric mapping of onshore structures in the Camamu and Almada basins suggest that extensional faults are controlled by two different directions of inherited older Brasiliano structures in the upper lithosphere (Ferreira et al., 2009). In the South Atlantic Campos Basin, 3D seismic data indicate that inherited basement structures provide a first order control on basin structure (Fetter, 2009). Here we investigate the role of structural inheritance on the formation of rifted passive margins with high-resolution 2D thermo-mechanical numerical experiments. The numerical domain is 1200 km long and 600 km deep and represents the lithosphere and the sublithospheric mantle. Model experiments were carried out by creating self-consistent orogenic inheritance where a first phase of orogen formation is followed by extension. We focus in particular on the role of varying amount of orogenic shortening, crustal rheology, contrasting styles of orogen formation on rifted margin style, and the time delay between orogeny and subsequent rifted passive formation. Model results are compared to contrasting structural styles of rifted passive margin formation as observed in the South Atlantic. Ferreira, T.S., Caixeta, J.M., Lima, F.D., 2009. Basement control in Camamu and Almada rift basins. Boletim de Geociências da Petrobrás 17, 69-88. Fetter, M., 2009. The role of basement tectonic reactivation on the structural evolution

Recent progress in Pacific-Asian Marginal Seas (PAMS) studies

Science.gov (United States)

Matsuno, Takeshi; Hirose, Naoki; Zhang, Jing; Cho, Yang-Ki; Chen, Dake; Yuan, Dongliang; Hung, Chin-Chang; Jan, Sen

2017-07-01

Marginal seas which represent the buffer zones between land and the pelagic ocean are being increasingly influenced by human activity. The role of the marginal seas is important for many reasons, among which are biological resources and climate change. In East Asia, we have marginal seas between the Asian Continent and the Pacific Ocean, where various countries and areas form complicated territories and EEZ. To understand the marine environment of marginal seas, international cooperative scientific activities are necessary, and it is essential to share the latest information and knowledge.

Improved Safety Margin Characterization of Risk from Loss of Offsite Power

International Nuclear Information System (INIS)

Nelson, Paul

2017-01-01

Original intent: The original intent of this task was ''support of the Risk-Informed Safety Margin Characteristic (RISMC) methodology in order'' ''to address ... efficiency of computation so that more accurate and cost-effective techniques can be used to address safety margin characterizations'' (S. M. Hess et al., ''Risk-Informed Safety Margin Characterization,'' Procs. ICONE17, Brussels, July 2009, CD format). It was intended that ''in Task 1 itself this improvement will be directed toward upon the very important issue of Loss of Offsite Power (LOOP) events,'' more specifically toward the challenge of efficient computation of the multidimensional nonrecovery integral that has been discussed by many previous contributors to the theory of nuclear safety. It was further envisioned that ''three different computational approaches will be explored,'' corresponding to the three subtasks listed below; deliverables were tied to the individual subtasks.

Fedme og risiko for marginal parodontitis

DEFF Research Database (Denmark)

Kongstad, Johanne; Keller, Amélie Cléo; Rohde, Jeanett Friis

2017-01-01

Oversigtsartiklen, der er af narrativ karakter, beskriver sammenhængen mellem overvægt/ fedme og marginal parodontitis. Artiklen er baseret på et udvalg af nyere engelsksproget litteratur og motiveres af den øgede forekomst af overvægtige og fede i befolkningen. Desuden er det afgørende, at tandl......Oversigtsartiklen, der er af narrativ karakter, beskriver sammenhængen mellem overvægt/ fedme og marginal parodontitis. Artiklen er baseret på et udvalg af nyere engelsksproget litteratur og motiveres af den øgede forekomst af overvægtige og fede i befolkningen. Desuden er det afgørende......, at tandlæger forholder sig kritisk til systemiske tilstandes mulige konsekvens for udvikling, forværring og behandling af marginal parodontitis. Der nævnes forskellige mål for fedme, hvor body mass index (BMI) og taljeomkreds er de mest anvendte. Problematikken vedrørende tidligere studiers anvendelse af...... forskellige kriterier for marginal parodontitis berøres. Litteraturgennemgangen tager udgangspunkt i de biologiske mekanismer, der udløses i fedtvæv ved overvægt/fedme og medfører en kronisk inflammatorisk tilstand med frigivelse af bl.a. adipokiner. Epidemiologiske tværsnitsog longitudinelle studier af...

PREDICTIVE METHODS FOR STABILITY MARGIN IN BWR

OpenAIRE

MELARA SAN ROMÁN, JOSÉ

2016-01-01

[EN] Power and flow oscillations in a BWR are very undesirable. One of the major concerns is to ensure, during power oscillations, compliance with GDC 10 and 12. GDC 10 requires that the reactor core be designed with appropriate margin to assure that specified acceptable fuel design limits will not be exceeded during any condition of normal operation, including the effects of anticipated operational occurrences. GDC 12 requires assurance that power oscillations which can result in conditions ...

Refining prices and margins in 1998

International Nuclear Information System (INIS)

Favennec, J.P.; Baudoin, C.

1999-01-01

Despite a business environment that was globally mediocre due primarily to the Asian crisis and to a mild winter in the northern hemisphere, the signs of improvement noted in the refining activity in 1996 were borne out in 1997. But the situation is not yet satisfactory in this sector: the low return on invested capital and the financing of environmental protection expenditure are giving cause for concern. In 1998, the drop in crude oil prices and the concomitant fall in petroleum product prices was ultimately rather favorable to margins. Two elements tended to put a damper on this relative optimism. First of all, margins continue to be extremely volatile and, secondly, the worsening of the economic and financial crisis observed during the summer made for a sharp decline in margins in all geographic regions, especially Asia

Stall Margin Improvement in a Centrifugal Compressor through Inducer Casing Treatment

Directory of Open Access Journals (Sweden)

V. V. N. K. Satish Koyyalamudi

2016-01-01

Full Text Available The increasing trend of high stage pressure ratio with increased aerodynamic loading has led to reduction in stable operating range of centrifugal compressors with stall and surge initiating at relatively higher mass flow rates. The casing treatment technique of stall control is found to be effective in axial compressors, but very limited research work is published on the application of this technique in centrifugal compressors. Present research was aimed to investigate the effect of casing treatment on the performance and stall margin of a high speed, 4 : 1 pressure ratio centrifugal compressor through numerical simulations using ANSYS CFX software. Three casing treatment configurations were developed and incorporated in the shroud over the inducer of the impeller. The predicted performance of baseline compressor (without casing treatment was in good agreement with published experimental data. The compressor with different inducer casing treatment geometries showed varying levels of stall margin improvement, up to a maximum of 18%. While the peak efficiency of the compressor with casing treatment dropped by 0.8%–1% compared to the baseline compressor, the choke mass flow rate was improved by 9.5%, thus enhancing the total stable operating range. The inlet configuration of the casing treatment was found to play an important role in stall margin improvement.

Safety significance of inadvertent operation of motor-operated valves in nuclear power plants

International Nuclear Information System (INIS)

Ruger, C.J.; Higgins, J.C.; Carbonaro, J.F.; Hall, R.E.

1994-01-01

Concerns about the consequences of valve mispositioning were brought to the forefront following an event at Davis Besse in 1985. The concern related to the ability to reposition open-quotes position-changeableclose quotes motor-operated valves (MOVs) from the control room in the event of their inadvertent operation and was documented in U.S. Nuclear Regulatory Commission (USNRC) Bulletin 85-03 and Generic Letter (GL) 89-10. The mispositioned MOVs may not be able to be returned to their required position due to high differential pressure or high flow conditions across the valves. The inability to reposition such valves may have significantly safety consequences, as in the Davis Besse event. However, full consideration of such mispositioning in safety analyses and in MOV test programs can be labor intensive and expensive. Industry raised concerns that consideration of position-changeable valves under GL 89-10 would not decrease the probability of core damage to an extent that would justify licensee costs. As a response, Brookhaven National Laboratory has conducted separate scoping studies for both boiling water reactors (BWRs) and pressurized water reactors (PWRs) using probabilistic risk assessment (PRA) techniques to determine if such valve mispositioning by itself is significant to safety. The approach used internal events PRA models to survey the order of magnitude of the risk-significance of valve mispositioning by considering the failure of selected position-changeable MOVs. The change in core damage frequency was determined for each valve considered, and the results were presented as a risk increase ratio for each of four assumed MOV failure rates. The risk increase ratios resulting from this failure rate sensitivity study can be used as a basis for a determination of the risk-significance of the MOV mispositioning issues for BWRs and PWRs

Geophysical constraints on geodynamic processes at convergent margins: A global perspective

Science.gov (United States)

Artemieva, Irina; Thybo, Hans; Shulgin, Alexey

2016-04-01

Convergent margins, being the boundaries between colliding lithospheric plates, form the most disastrous areas in the world due to intensive, strong seismicity and volcanism. We review global geophysical data in order to illustrate the effects of the plate tectonic processes at convergent margins on the crustal and upper mantle structure, seismicity, and geometry of subducting slab. We present global maps of free-air and Bouguer gravity anomalies, heat flow, seismicity, seismic Vs anomalies in the upper mantle, and plate convergence rate, as well as 20 profiles across different convergent margins. A global analysis of these data for three types of convergent margins, formed by ocean-ocean, ocean-continent, and continent-continent collisions, allows us to recognize the following patterns. (1) Plate convergence rate depends on the type of convergent margins and it is significantly larger when, at least, one of the plates is oceanic. However, the oldest oceanic plate in the Pacific ocean has the smallest convergence rate. (2) The presence of an oceanic plate is, in general, required for generation of high-magnitude (M N 8.0) earthquakes and for generating intermediate and deep seismicity along the convergent margins. When oceanic slabs subduct beneath a continent, a gap in the seismogenic zone exists at depths between ca. 250 km and 500 km. Given that the seismogenic zone terminates at ca. 200 km depth in case of continent-continent collision, we propose oceanic origin of subducting slabs beneath the Zagros, the Pamir, and the Vrancea zone. (3) Dip angle of the subducting slab in continent-ocean collision does not correlate neither with the age of subducting oceanic slab, nor with the convergence rate. For ocean-ocean subduction, clear trends are recognized: steeply dipping slabs are characteristic of young subducting plates and of oceanic plates with high convergence rate, with slab rotation towards a near-vertical dip angle at depths below ca. 500 km at very high

Effect of software version and parameter settings on the marginal and internal adaptation of crowns fabricated with the CAD/CAM system.

Science.gov (United States)

Shim, Ji Suk; Lee, Jin Sook; Lee, Jeong Yol; Choi, Yeon Jo; Shin, Sang Wan; Ryu, Jae Jun

2015-10-01

This study investigated the marginal and internal adaptation of individual dental crowns fabricated using a CAD/CAM system (Sirona's BlueCam), also evaluating the effect of the software version used, and the specific parameter settings in the adaptation of crowns. Forty digital impressions of a master model previously prepared were acquired using an intraoral scanner and divided into four groups based on the software version and on the spacer settings used. The versions 3.8 and 4.2 of the software were used, and the spacer parameter was set at either 40 μm or 80 μm. The marginal and internal fit of the crowns were measured using the replica technique, which uses a low viscosity silicone material that simulates the thickness of the cement layer. The data were analyzed using a Friedman two-way analysis of variance (ANOVA) and paired t-tests with significance level set at psoftware version (psoftware showed a better fit than those designed with the version 3.8, particularly in the axial wall and in the inner margin. The spacer parameter was more accurately represented in the version 4.2 of the software than in the version 3.8. In addition, the use of the version 4.2 of the software combined with the spacer parameter set at 80 μm showed the least variation. On the other hand, the outer margin was not affected by the variables. Compared to the version 3.8 of the software, the version 4.2 can be recommended for the fabrication of well-fitting crown restorations, and for the appropriate regulation of the spacer parameter.

Public and Private Physical Affection Differences between Same-Sex and Different-Sex Couples: The Role of Perceived Marginalization

Directory of Open Access Journals (Sweden)

Amani El-Alayli

2011-12-01

Full Text Available Despite its connection with relationship satisfaction, research on physical affection is scarce and fails to disentangle private and public displays of affection. It is important to examine both types if marginalized couples are less comfortable displaying affection publicly. The present study examined whether same-sex couples display less public (but not private physical affection than different-sex couples due to stronger feelings of relationship marginalization. It also examined how public/private affection and marginalization relate to relationship satisfaction. Women in committed same-sex and different-sex relationships completed surveys of public affection, private affection, marginalization, and relationship satisfaction online. As predicted, women in same-sex relationships displayed less public affection than those in different-sex relationships, an effect mediated by general societal marginalization. Both private and public affection predicted higher relationship satisfaction, whereas feelings of marginalization by friends/family predicted lower relationship satisfaction. We discuss implications for relationship counseling and propose new ways of looking at marginalization.

Realistic respiratory motion margins for external beam partial breast irradiation

Energy Technology Data Exchange (ETDEWEB)

Conroy, Leigh; Quirk, Sarah [Department of Medical Physics, Tom Baker Cancer Centre, Calgary, Alberta T2N 4N2 (Canada); Department of Physics and Astronomy, University of Calgary, Calgary, Alberta T2N 1N4 (Canada); Smith, Wendy L., E-mail: wendy.smith@albertahealthservices.ca [Department of Medical Physics, Tom Baker Cancer Centre, Calgary, Alberta T2N 4N2 (Canada); Department of Physics and Astronomy, University of Calgary, Calgary, Alberta T2N 1N4 (Canada); Department of Oncology, University of Calgary, Calgary, Alberta T2N 1N4 (Canada)

2015-09-15

Purpose: Respiratory margins for partial breast irradiation (PBI) have been largely based on geometric observations, which may overestimate the margin required for dosimetric coverage. In this study, dosimetric population-based respiratory margins and margin formulas for external beam partial breast irradiation are determined. Methods: Volunteer respiratory data and anterior–posterior (AP) dose profiles from clinical treatment plans of 28 3D conformal radiotherapy (3DCRT) PBI patient plans were used to determine population-based respiratory margins. The peak-to-peak amplitudes (A) of realistic respiratory motion data from healthy volunteers were scaled from A = 1 to 10 mm to create respiratory motion probability density functions. Dose profiles were convolved with the respiratory probability density functions to produce blurred dose profiles accounting for respiratory motion. The required margins were found by measuring the distance between the simulated treatment and original dose profiles at the 95% isodose level. Results: The symmetric dosimetric respiratory margins to cover 90%, 95%, and 100% of the simulated treatment population were 1.5, 2, and 4 mm, respectively. With patient set up at end exhale, the required margins were larger in the anterior direction than the posterior. For respiratory amplitudes less than 5 mm, the population-based margins can be expressed as a fraction of the extent of respiratory motion. The derived formulas in the anterior/posterior directions for 90%, 95%, and 100% simulated population coverage were 0.45A/0.25A, 0.50A/0.30A, and 0.70A/0.40A. The differences in formulas for different population coverage criteria demonstrate that respiratory trace shape and baseline drift characteristics affect individual respiratory margins even for the same average peak-to-peak amplitude. Conclusions: A methodology for determining population-based respiratory margins using real respiratory motion patterns and dose profiles in the AP direction was

Realistic respiratory motion margins for external beam partial breast irradiation

International Nuclear Information System (INIS)

Conroy, Leigh; Quirk, Sarah; Smith, Wendy L.

2015-01-01

Purpose: Respiratory margins for partial breast irradiation (PBI) have been largely based on geometric observations, which may overestimate the margin required for dosimetric coverage. In this study, dosimetric population-based respiratory margins and margin formulas for external beam partial breast irradiation are determined. Methods: Volunteer respiratory data and anterior–posterior (AP) dose profiles from clinical treatment plans of 28 3D conformal radiotherapy (3DCRT) PBI patient plans were used to determine population-based respiratory margins. The peak-to-peak amplitudes (A) of realistic respiratory motion data from healthy volunteers were scaled from A = 1 to 10 mm to create respiratory motion probability density functions. Dose profiles were convolved with the respiratory probability density functions to produce blurred dose profiles accounting for respiratory motion. The required margins were found by measuring the distance between the simulated treatment and original dose profiles at the 95% isodose level. Results: The symmetric dosimetric respiratory margins to cover 90%, 95%, and 100% of the simulated treatment population were 1.5, 2, and 4 mm, respectively. With patient set up at end exhale, the required margins were larger in the anterior direction than the posterior. For respiratory amplitudes less than 5 mm, the population-based margins can be expressed as a fraction of the extent of respiratory motion. The derived formulas in the anterior/posterior directions for 90%, 95%, and 100% simulated population coverage were 0.45A/0.25A, 0.50A/0.30A, and 0.70A/0.40A. The differences in formulas for different population coverage criteria demonstrate that respiratory trace shape and baseline drift characteristics affect individual respiratory margins even for the same average peak-to-peak amplitude. Conclusions: A methodology for determining population-based respiratory margins using real respiratory motion patterns and dose profiles in the AP direction was

17 CFR 41.47 - Withdrawal of margin.

Science.gov (United States)

2010-04-01

... PRODUCTS Customer Accounts and Margin Requirements § 41.47 Withdrawal of margin. (a) By the customer... positions in the account under this Regulation (Subpart E, §§ 41.42 through 41.49). (b) By the security...) Interest charged on credit maintained in the account; (3) Communication or shipping charges with respect to...

Double-sided Moral Hazard and Margin-based Royalty

OpenAIRE

NARIU, Tatsuhiko; UEDA, Kaoru; LEE, DongJoon

2009-01-01

This paper analyzes royalty modes in the franchise arrangements of convenience stores under double-sided moral hazard. In Japan, the majority of franchisors charge margin-based royalties based on net margins rather than sales-based royalties based on sales. We show that the franchisor can attain the first-best outcome by adopting margin-based royalties under double-sided moral hazard. We consider a case where a franchisee sells two kinds of goods; one is shipped from its franchisor and the ot...

Erosion and marginalization in Pahuatlán municipality, Puebla: A binomial of causality?

Directory of Open Access Journals (Sweden)

Rosalía Castelán Vega

2012-02-01

Full Text Available An understanding of the interaction between deterioration of the environment and marginalization of communities is essential in order to formulate public policies that will combine social and environmental objectives. The aim of the present study was to explore the relationship between erosion and marginalization in the municipality of Pahuatlán, Puebla, Mexico. The erosion was assessed by the methods developed by FAO and Ruiz et al. Marginalization was determined by the Consejo Nacional de Población (CONAPO method using Instituto Nacional de Estadística, Geografía e Informática (INEGI indicators. The relationship was established by a simple correspondence analysis and was confirmed by Pearson´s Chi-square test. Erosion could be assigned to one of three grades: moderate, severe and very severe. In the 32 towns that constitute the municipality, marginalization was moderate in 5, severe in 14 and very severe in 13. The correspondence analysis and the Chi-square test showed a causal relationship between erosion and marginalization, although it was not possible to detect with certainty which is the cause and which the effect. However, the results can contribute to the design of sustainable strategies for the municipality.

The effect of gingival wall location on the marginal seal of class ii restorations prepared with a flowable bulk-fill resin-based composite.

Science.gov (United States)

Segal, P; Candotto, V; Ben-Amar, A; Eger, M; Matalon, S; Lauritano, D; Ormianer, Z

2018-01-01

SureFil SDR is a flowable resin-based composite that allows a single incremental bulk placement. The marginal seal of SureFil SDR at the gingival margins of class II restorations located apical to the cemento-enamel-junction (CEJ) has not been adequately evaluated compared to those located occlusal to the CEJ. Forty class II cavities were prepared in human molars. The gingival margins of 20 preparations were located 0.5 mm occlusal to the CEJ, and the other 20 preparations were located 0.5 mm apical to the CEJ. The cavities surfaces were bonded with XenoV dental adhesive and filled with SDR in one bulk increment up to 4 mm, after which they were covered with CeramX. The teeth were subjected to thermo-and load-cycling, and their gingival margins were exposed to 0.5% basic-fuchsin solution. The specimens were sectioned mesio-distally and scored for microleakage. A Wilcoxon test for pairwise comparison was performed to determine significance. Dye penetration was observed in 30% of the 20 restorations with cavo-surface margins located occlusal to the CEJ and in 55% of the 20 restorations with cavo-surface margins located apical to the CEJ. The bulk-fill flowable resin base SureFil SDR with XenoV dental adhesive provided a better marginal seal in class II restorations with gingival margins above the CEJ compared to restorations with gingival margins below the CEJ. SDR should not be recommended for class II cavity preparations with gingival margins located below the CEJ.

Medical and Social Determinants of Subsequent Labour Market Marginalization in Young Hospitalized Suicide Attempters.

Science.gov (United States)

Niederkrotenthaler, Thomas; Tinghög, Petter; Goldman-Mellor, Sidra; Wilcox, Holly C; Gould, Madelyn; Mittendorfer-Rutz, Ellenor

2016-01-01

Individuals with a history of suicide attempt have a high risk for subsequent labour market marginalization. This study aimed at assessing the effect of individual and parental factors on different measures of marginalization. Prospective cohort study based on register linkage of 5 649 individuals who in 1994 were 16-30 years old, lived in Sweden and were treated in inpatient care for suicide attempt during 1992-1994. Hazard ratios (HRs) for labour market marginalization defined as long-term unemployment (>180 days), sickness absence (>90 days), or disability pension in 1995-2010 were calculated with Cox regression. Medical risk factors, particularly any earlier diagnosed specific mental disorders (e.g., schizophrenia: HR 5.4 (95% CI: 4.2, 7.0), personality disorders: HR 3.9, 95% CI: 3.1, 4.9), repetitive suicide attempts (HR 1.6, 95% CI: 1.4, 1.9) were associated with a higher relative risk of disability pension. Individual medical factors were of smaller importance for long-term sickness absence, and of only marginal relevance to long-term unemployment. Country of birth outside Europe had an opposite effect on disability pension (HR 0.6, 95% CI: 0.4, 0.8) and long-term unemployment (HR 1.5, 95% CI: 1.3, 1.8). Female sex was positively correlated with long-term sickness absence (HR 1.6, 95% CI: 1.4, 1.7), and negatively associated with long-term unemployment (HR: 0.8, 95% CI: 0.7, 0.9). As compared to disability pension, long-term sickness absence and unemployment was more strongly related to socio-economic variables. Marginalization pathways seemed to vary with migration status and sex. These findings may contribute to the development of intervention strategies which take the individual risk for marginalization into account.

A Solvable Dynamic Principal-Agent Model with Linear Marginal Productivity

Directory of Open Access Journals (Sweden)

Bing Liu

2018-01-01

Full Text Available We study how to design an optimal contract which provides incentives for agent to put forth the desired effort in a continuous time dynamic moral hazard model with linear marginal productivity. Using exponential utility and linear production, three different information structures, full information, hidden actions and hidden savings, are considered in the principal-agent model. Applying the stochastic maximum principle, we solve the model explicitly, where the agent’s optimization problem becomes the principal’s problem of choosing an optimal contract. The explicit solutions to our model allow us to analyze the distortion of allocations. The main effect of hidden actions is a reduction of effort, but the a smaller effect is on the consumption allocation. In the hidden saving case, the consumption distortion almost vanishes but the effort distortion is expanded. In our setting, the agent’s optimal effort is also reduced with the decline of marginal productivity.

Impact of Close and Positive Margins in Transoral Laser Microsurgery for Tis-T2 Glottic Cancer.

Science.gov (United States)

Fiz, Ivana; Mazzola, Francesco; Fiz, Francesco; Marchi, Filippo; Filauro, Marta; Paderno, Alberto; Parrinello, Giampiero; Piazza, Cesare; Peretti, Giorgio

2017-01-01

Transoral laser microsurgery (TLM) represents one of the most effective treatment strategies for Tis-T2 glottic squamous cell carcinomas (SCC). The prognostic influence of close/positive margins is still debated, and the role of narrow band imaging (NBI) in their intraoperative definition is still to be validated on large cohort of patients. This study analyzed the influence of margin status on recurrence-free survival (RFS) and disease-specific survival (DSS). We retrospectively studied 507 cases of pTis-T1b (Group A) and 127 cases of pT2 (Group B) glottic SCC. We identified the following margin status: negative ( n  = 232), close superficial ( n  = 79), close deep (CD) ( n  = 35), positive single superficial ( n  = 146), positive multiple superficial ( n  = 94), and positive deep ( n  = 48) and analyzed their impact on RFS and DSS. Close margins were defined by tumor-margin distance <1 mm. Pre-TLM margins were defined by white light in 323 patients, whereas NBI was employed in 311 patients. In Group A, DSS and RFS were reduced in positive multiple superficial and positive deep margins (DSS = 96.1 and 97%, both p  < 0.05; RFS = 72%, p  < 0.001 and 75.8%, p  < 0.01). In Group B, DSS was reduced in positive multiple superficial margins (82.4%, p  < 0.05). RFS was reduced in positive single superficial, positive multiple superficial, and positive deep margins (62.5, 41.2, and 53.3%, p  < 0.01). In the entire population, RFS was reduced in CD margins (77.1%, p  < 0.05). Use of NBI led to improvement in RFS and DSS. The study indicates that close and positive single superficial margins do not affect DSS. By contrast, all types of margin positivity predict the occurrence of relapses, albeit with different likelihood, depending on stage/margin type. CD margins should be considered as a single risk factor. Use of NBI granted better intraoperative margins definition.

Time Safety Margin: Theory and Practice

Science.gov (United States)

2016-09-01

Air Education and Training Command Handbook 99-107, T-38 Road to Wings, Randolph Air Force Base, Texas, July 2013. 65 This page was intentionally left...412TW-TIH-16-01 TIME SAFETY MARGIN: THEORY AND PRACTICE WILLIAM R. GRAY, III Chief Test Pilot USAF Test Pilot School SEPTEMBER 2016... Safety Margin: The01y and Practice) was submitted by the Commander, 4 I 2th Test Wing, Edwards AFB, Ca lifornia 93524-6843. Foreign announcement and

Benefit–cost analysis of non-marginal climate and energy projects

International Nuclear Information System (INIS)

Dietz, Simon; Hepburn, Cameron

2013-01-01

Conventional benefit–cost analysis incorporates the normally reasonable assumption that the policy or project under examination is marginal. Among the assumptions this entails is that the policy or project is small, so the underlying growth rate of the economy does not change. However, this assumption may be inappropriate in some important circumstances, including in climate-change and energy policy. One example is global targets for carbon emissions, while another is a large renewable energy project in a small economy, such as a hydropower dam. This paper develops some theory on the evaluation of non-marginal projects, with empirical applications to climate change and energy. We examine the conditions under which evaluation of a non-marginal project using marginal methods may be wrong, and in our empirical examples we show that both qualitative and large quantitative errors are plausible. - Highlights: • This paper develops the theory of the evaluation of non-marginal projects. • It also includes empirical applications to climate change and energy. • We show when evaluation of a non-marginal project using marginal methods is wrong

30 CFR 204.3 - What alternatives are available for marginal properties?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What alternatives are available for marginal... MINERALS REVENUE MANAGEMENT ALTERNATIVES FOR MARGINAL PROPERTIES General Provisions § 204.3 What alternatives are available for marginal properties? If you have production from a marginal property, MMS and...

Marginal abatement cost curves for policy recommendation – A method for energy system analysis

International Nuclear Information System (INIS)

Tomaschek, Jan

2015-01-01

The transport sector is seen as one of the key factors for driving future energy consumption and greenhouse gas (GHG) emissions. In order to rank possible measures marginal abatement cost curves have become a tool to graphically represent the relationship between abatement costs and emission reduction. This paper demonstrates how to derive marginal abatement cost curves for well-to-wheel GHG emissions of the transport sector considering the full energy provision chain and the interlinkages and interdependencies within the energy system. Presented marginal abatement cost curves visualize substitution effects between measures for different marginal mitigation costs. The analysis makes use of an application of the energy system model generator TIMES for South Africa (TIMES-GEECO). For the example of Gauteng province, this study exemplary shows that the transport sector is not the first sector to address for cost-efficient reduction of GHG emissions. However, the analysis also demonstrates that several options are available to mitigate transport related GHG emissions at comparable low marginal abatement costs. This methodology can be transferred to other economic sectors as well as to other regions in the world to derive cost-efficient GHG reduction strategies

Margination of Stiffened Red Blood Cells Regulated By Vessel Geometry.

Science.gov (United States)

Chen, Yuanyuan; Li, Donghai; Li, Yongjian; Wan, Jiandi; Li, Jiang; Chen, Haosheng

2017-11-10

Margination of stiffened red blood cells has been implicated in many vascular diseases. Here, we report the margination of stiffened RBCs in vivo, and reveal the crucial role of the vessel geometry in the margination by calculations when the blood is seen as viscoelastic fluid. The vessel-geometry-regulated margination is then confirmed by in vitro experiments in microfluidic devices, and it establishes new insights to cell sorting technology and artificial blood vessel fabrication.

Refining MARGINS Mini-Lessons Using Classroom Observations

Science.gov (United States)

Iverson, E. A.; Manduca, C. A.; McDaris, J. R.; Lee, S.

2009-12-01

One of the challenges that we face in developing teaching materials or activities from research findings is testing the materials to determine that they work as intended. Traditionally faculty develop material for their own class, notice what worked and didn’t, and improve them the next year. However, as we move to a community process of creating and sharing teaching materials, a community-based process for testing materials is appropriate. The MARGINS project has piloted such a process for testing teaching materials and activities developed as part of its mini-lesson project (http://serc.carleton.edu/margins/index.html). Building on prior work developing mechanisms for community review of teaching resources (e.g. Kastens, 2002; Hancock and Manduca, 2005; Mayhew and Hall, 2007), the MARGINS evaluation team developed a structured classroom observation protocol. The goals of field testing are to a) gather structured, consistent feedback for the lesson authors based on classroom use; b) guide reviewers of these lessons to reflect on research-based educational practice as a framework for their comments; c) collect information on the data and observations that the reviewer used to underpin their review; d) determine which mini-lessons are ready to be made widely available on the website. The protocol guides faculty observations on why they used the activity, the effectiveness of the activity in their classroom, the success of the activity in leading to the desired learning, and what other faculty need to successfully use the activity. Available online (http://serc.carleton.edu/margins/protocol.html), the protocol can be downloaded and completed during instruction with the activity. In order to encourage review of mini-lessons using the protocol, a workshop focused on review and revision of activities was held in May 2009. In preparation for the workshop, 13 of the 28 participants chose to field test a mini-lesson prior to the workshop and reported that they found this

Distribution and depth of bottom-simulating reflectors in the Nankai subduction margin

Science.gov (United States)

Ohde, Akihiro; Otsuka, Hironori; Kioka, Arata; Ashi, Juichiro

2018-04-01

Surface heat flow has been observed to be highly variable in the Nankai subduction margin. This study presents an investigation of local anomalies in surface heat flows on the undulating seafloor in the Nankai subduction margin. We estimate the heat flows from bottom-simulating reflectors (BSRs) marking the lower boundaries of the methane hydrate stability zone and evaluate topographic effects on heat flow via two-dimensional thermal modeling. BSRs have been used to estimate heat flows based on the known stability characteristics of methane hydrates under low-temperature and high-pressure conditions. First, we generate an extensive map of the distribution and subseafloor depths of the BSRs in the Nankai subduction margin. We confirm that BSRs exist at the toe of the accretionary prism and the trough floor of the offshore Tokai region, where BSRs had previously been thought to be absent. Second, we calculate the BSR-derived heat flow and evaluate the associated errors. We conclude that the total uncertainty of the BSR-derived heat flow should be within 25%, considering allowable ranges in the P-wave velocity, which influences the time-to-depth conversion of the BSR position in seismic images, the resultant geothermal gradient, and thermal resistance. Finally, we model a two-dimensional thermal structure by comparing the temperatures at the observed BSR depths with the calculated temperatures at the same depths. The thermal modeling reveals that most local variations in BSR depth over the undulating seafloor can be explained by topographic effects. Those areas that cannot be explained by topographic effects can be mainly attributed to advective fluid flow, regional rapid sedimentation, or erosion. Our spatial distribution of heat flow data provides indispensable basic data for numerical studies of subduction zone modeling to evaluate margin parallel age dependencies of subducting plates.[Figure not available: see fulltext.

How does imaging frequency and soft tissue motion affect the PTV margin size in partial breast and boost radiotherapy?

International Nuclear Information System (INIS)

Harris, Emma J.; Donovan, Ellen M.; Coles, Charlotte E.; Boer, Hans C.J. de; Poynter, Andrew; Rawlings, Christine; Wishart, Gordon C.; Evans, Philip M.

2012-01-01

Purpose: This study investigates (i) the effect of verification protocols on treatment accuracy and PTV margins for partial breast and boost breast radiotherapy with short fractionation schema (15 fractions), (ii) the effect of deformation of the excision cavity (EC) on PTV margin size, (iii) the imaging dose required to achieve specific PTV margins. Methods and materials: Verification images using implanted EC markers were studied in 36 patients. Target motion was estimated for a 15 fraction partial breast regimen using imaging protocols based on on-line and off-line motion correction strategies (No Action Level (NAL) and the extended NAL (eNAL) protocols). Target motion was used to estimate a PTV margin for each protocol. To evaluate treatment errors due to deformation of the excision cavity, individual marker positions were obtained from 11 patients. The mean clip displacement and daily variation in clip position during radiotherapy were determined and the contribution of these errors to PTV margin calculated. Published imaging dose data were used to estimate total dose for each protocol. Finally the number of images required to obtain a specific PTV margin was evaluated and hence, the relationship between PTV margins and imaging dose was investigated. Results: The PTV margin required to account for excision cavity motion, varied between 10.2 and 2.4 mm depending on the correction strategy used. Average clip movement was 0.8 mm and average variation in clip position during treatment was 0.4 mm. The contribution to PTV margin from deformation was estimated to be small, less than 0.2 mm for both off-line and on-line correction protocols. Conclusion: A boost or partial breast PTV margin of ∼10 mm, is possible with zero imaging dose and workload, however, patients receiving boost radiotherapy may benefit from a margin reduction of ∼4 mm with imaging doses from 0.4 cGy to 25 cGy using an eNAL protocol. PTV margin contributions from deformation errors are likely

Effect of the circumferential resection margin on survival following rectal cancer surgery.

Science.gov (United States)

Kelly, S B; Mills, S J; Bradburn, D M; Ratcliffe, A A; Borowski, D W

2011-04-01

The aim was to determine the effect of the circumferential resection margin (CRM) on overall survival following surgical excision of rectal cancer. The effect of CRM on survival was examined by case mix-adjusted analysis of patients undergoing potentially curative excision of a rectal cancer between 1998 and 2002. Of 1896 patients, 1561 (82.3 per cent) had recorded data on the CRM. In 232 patients (14.9 per cent) tumour was found 1 mm or less from the CRM. In 370 patients (23.7 per cent) it was over 1 mm but no more than 5 mm from the CRM, and in 288 (18.4 per cent) it was over 5 mm but no more than 10 mm from the CRM. The remaining 671 patients (43.0 per cent) had a CRM exceeding 10 mm. Overall 5-year survival rates for these groups were 43.2, 51.7, 66.6 and 66.0 per cent respectively. Compared with patients with a CRM exceeding 10 mm, the adjusted risk of death was significantly increased for patients with a CRM of 1 mm or less (hazard ratio (HR) 1.61, P CRM (HR 1.02, P = 0.873). The adverse effect of a CRM greater than 1 mm but no larger than 5 mm was found particularly in mid-rectal cancers. A predicted CRM of 5 mm or less on preoperative staging should be considered for neoadjuvant treatment. Copyright © 2011 British Journal of Surgery Society Ltd. Published by John Wiley & Sons, Ltd.

Biomechanical Effect of Margin Convergence Techniques: Quantitative Assessment of Supraspinatus Muscle Stiffness.

Directory of Open Access Journals (Sweden)

Taku Hatta

Full Text Available Although the margin convergence (MC technique has been recognized as an option for rotator cuff repair, little is known about the biomechanical effect on repaired rotator cuff muscle, especially after supplemented footprint repair. The purpose of this study was to assess the passive stiffness changes of the supraspinatus (SSP muscle after MC techniques using shear wave elastography (SWE. A 30 × 40-mm U-shaped rotator cuff tear was created in 8 cadaveric shoulders. Each specimen was repaired with 6 types of MC technique (1-, 2-, 3-suture MC with/without footprint repair, in a random order at 30° glenohumeral abduction. Passive stiffness of four anatomical regions in the SSP muscle was measured based on an established SWE method. Data were obtained from the SSP muscle at 0° abduction under 8 different conditions: intact (before making a tear, torn, and postoperative conditions with 6 techniques. MC techniques using 1-, or 2-suture combined with footprint repair showed significantly higher stiffness values than the intact condition. Passive stiffness of the SSP muscle was highest after a 1-suture MC with footprint repair for all regions when compared among all repair procedures. There was no significant difference between the intact condition and a 3-suture MC with footprint repair. MC techniques with single stitch and subsequent footprint repair may have adverse effects on muscle properties and tensile loading on repair, increasing the risk of retear of repairs. Adding more MC stitches could reverse these adverse effects.

Sustainable food production in marginal lands—Case of GDLA member countries

Directory of Open Access Journals (Sweden)

Shabbir A. Shahid

2013-06-01

Full Text Available Sustainable food production in the changing climate and dwindling water resources in the Global Dry Land Alliance (GDLA member countries is a real challenge, especially when considering marginal lands in dryland systems. The definition of marginal land is very vague and defined from different perspectives (pragmatism about marginal lands. Dryland itself indicates "marginality" due to water stress. In general, the abandoned agriculture land where food production is not economical, and has low inherent productivity potential is considered marginal; however, a land may be marginal for agriculture but vital for grazing. In this paper attempts have been made to give review of literature (water stress, extent of marginal saline lands, marginality. Policy matters (development of soil, water and agriculture strategies that GDLA and member countries should consider for future sustainable food production in their countries, including but not limited to, assessment of land resources for agriculture potential, defining, mapping and characterizing marginal lands, and use of innovative technologies (conservation agriculture, climate smart agriculture, integrated soil reclamation program and capacity building for food production, are discussed. The international perception (FAO, UNEP, CGIAR on marginal lands is also described. An innovative approach of using national biocapacity and ecological footprint is used to assess marginality of GDLA member countries. Ecological overshoot (using 1.5 earth planets and biocapacity debtor and creditor countries are highlighted. Challenges and best management practices for food production in marginal lands are included. Other important issues, like leasing land abroad, GDLA strategic food reserves and best management practices, innovative ideas for food production are shared. Finally recommendations are drafted for actions by GDLA, its member countries and the partners.

The adverse effects of inadvertent intraoperative intravenous ...

African Journals Online (AJOL)

2012-03-03

Mar 3, 2012 ... We present the case of a 24-year-old woman who was scheduled for an elective diagnostic laparoscopy for chronic pelvic pain. ... Shortly afterwards, the patient developed tachycardia with a heart rate up .... healthy 29-year-old male scheduled for an ambulatory coelioscopic cholecystectomy. Their patient ...

Intacs for early pellucid marginal degeneration.

Science.gov (United States)

Kymionis, George D; Aslanides, Ioannis M; Siganos, Charalambos S; Pallikaris, Ioannis G

2004-01-01

A 42-year-old man had Intacs (Addition Technology Inc.) implantation for early pellucid marginal degeneration (PMD). Two Intacs segments (0.45 mm thickness) were inserted uneventfully in the fashion typically used for low myopia correction (nasal-temporal). Eleven months after the procedure, the uncorrected visual acuity was 20/200, compared with counting fingers preoperatively, while the best spectacle-corrected visual acuity improved to 20/25 from 20/50. Corneal topographic pattern also improved. Although the results are encouraging, concern still exists regarding the long-term effect of this approach for the management of patients with PMD.

Identifying technology innovations for marginalized smallholders-A conceptual approach.

Science.gov (United States)

Malek, Mohammad Abdul; Gatzweiler, Franz W; Von Braun, Joachim

2017-05-01

This paper adds a contribution in the existing literature in terms of theoretical and conceptual background for the identification of idle potentials of marginal rural areas and people by means of technological and institutional innovations. The approach follows ex-ante assessment for identifying suitable technology and institutional innovations for marginalized smallholders in marginal areas-divided into three main parts (mapping, surveying and evaluating) and several steps. Finally, it contributes to the inclusion of marginalized smallholders by an improved way of understanding the interactions between technology needs, farming systems, ecological resources and poverty characteristics in the different segments of the poor, and to link these insights with productivity enhancing technologies.

Evaluation of the marginal fit of metal copings fabricated on three different marginal designs using conventional and accelerated casting techniques: An in vitro study

Directory of Open Access Journals (Sweden)

Sharad Vaidya

2014-01-01

Conclusion: Among the three marginal designs studied, shoulder with bevel showed the best marginal fit with conventional as well as accelerated casting techniques. Accelerated casting technique could be a vital alternative to the time-consuming conventional casting technique. The marginal fit between the two casting techniques showed no statistical difference.

Cretaceous to Recent Asymetrical Subsidence of South American and West African Conjugate Margins

Science.gov (United States)

Kenning, J.; Mann, P.

2017-12-01

Two divergent interpretations have been proposed for South American rifted-passive margins: the "mirror hypothesis" proposes that the rifted margins form symmetrically from pure shear of the lithosphere while upper-plate-lower plate models propose that the rifted margins form asymmetrically by simple shear. Models based on seismic reflection and refraction imaging and comparison of conjugate, rifted margins generally invoke a hybrid stretching process involving elements of both end member processes along with the effects of mantle plumes active during the rift and passive margin phases. We use subsidence histories of 14, 1-7 km-deep exploration wells located on South American and West African conjugate pairs now separated by the South Atlantic Ocean, applying long-term subsidence to reveal the symmetry or asymmetry of the underlying, conjugate, rift processes. Conjugate pairs characterize the rifted margin over a distance of 3500 km and include: Colorado-South Orange, Punta Del Este-North Orange, South Pelotas-Lüderitz and the North Pelotas-Walvis Basins. Of the four conjugate pairs, more rapid subsidence on the South American plate is consistently observed with greater initial rift and syn-rift subsidence rates of >60m/Ma (compared to 100 m/Ma are observed offshore South Africa between approximately 120-80 Ma, compatible with onset of the post-rift thermal sag phase. During this period the majority of burial is completed and rates remain low at Argentina/Uruguay displays more gradual subsidence throughout the Cretaceous, consistently averaging a moderate 15-30m/Ma. By the end of this stage there is a subsequent increase to 25-60 m/Ma within the last 20 Ma, interpreted to reflect lithospheric loading due to increased sedimentation rates during the Cenozoic. This increase in subsidence rate is not seen in the African conjugate section where the majority of sediments bypassed the highly aggraded Cretaceous shelf. Initially greater on the Brazilian margin compared to

Marginal Accuracy of Castings Produced with Different Investment Systems.

Science.gov (United States)

Yadav, R K

2009-04-01

The use of casting ring to produce accurate castings has been challenged with the introduction of a ringless casting technique. This study compared the marginal accuracy of all - metal complete coverage crowns fabricated with ringless, split plastic ring and metal ring investment systems. A total of 40 all- metal complete coverage crowns were fabricated on a metal die. The crowns were divided in 4 groups (Group A, B, C and D) of 10 patterns each. A ringless system of investing and casting was used for group A whereas a split plastic ring system was used for group B. Groups C and D utilized metal ring with single and double layers of asbestos free cellulose acetate liner respectively for investing and casting procedures. The restorations were seated on the metal die and the vertical marginal discrepancy was evaluated by measuring the gap between the finish line on the die and the margins of the crown on four specific sites with an optical microscope. Statistical analysis was carried out using ANOVA and multiple comparison "t" test. The mean vertical marginal discrepancy for groups A, B, C and D was 95μm, 136μm, 128μm and 104μm respectively. Vertical marginal discrepancy on each surface was compared among the four groups. Difference of vertical marginal discrepancy on buccal surface (p0.05). Accurate castings with better marginal fit can be produced with ringless casting technique.

Marginal adaptation of composite resins under two adhesive techniques.

Science.gov (United States)

Dačić, Stefan; Veselinović, Aleksandar M; Mitić, Aleksandar; Nikolić, Marija; Cenić, Milica; Dačić-Simonović, Dragica

2016-11-01

In the present research, different adhesive techniques were used to set up fillings with composite resins. After the application of etch and rinse or self etch adhesive technique, marginal adaptation of composite fillings was estimated by the length of margins without gaps, and by the microretention of resin in enamel and dentin. The study material consisted of 40 extracted teeth. Twenty Class V cavities were treated with 35% phosphorous acid and restored after rinsing by Adper Single Bond 2 and Filtek Ultimate-ASB/FU 3M ESPE composite system. The remaining 20 cavities were restored by Adper Easy One-AEO/FU 3M ESPE composite system. Marginal adaptation of composite fillings was examined using a scanning electron microscope (SEM). The etch and rinse adhesive technique showed a significantly higher percentage of margin length without gaps (in enamel: 92.5%, in dentin: 57.3%), compared with the self-etch technique with lower percentage of margin length without gaps, in enamel 70.4% (p resin tugs in interprismatic spaces of enamel, while the dentin microretention was composed of adhesive and hybrid layers with resin tugs in dentin canals. In the second technique, resin tugs were rarely seen and a microgap was dominant along the border of restoration margins. The SEM analysis showed a better marginal adaptation of composite resin to enamel and dentin with better microretention when the etch and rinse adhesive procedure was applied. © 2016 Wiley Periodicals, Inc.

Developing tools to identify marginal lands and assess their potential for bioenergy production

Science.gov (United States)

Galatsidas, Spyridon; Gounaris, Nikolaos; Dimitriadis, Elias; Rettenmaier, Nils; Schmidt, Tobias; Vlachaki, Despoina

2017-04-01

effectively sustaining bioenergy plants (soil, climate, topography, vegetation, etc.) - Bioenergy plant characteristics and their ability to grow on marginal lands - Needs and concerns on environmental issues and ecosystem benefits and services (biodiversity, carbon sequestration potential, soil organic carbon trend, etc.) - Sustainability assessments (incl. e.g. LCA) of biomass production at market scale - Analysis results of generic scenarios for biomass production, harvesting, logistics and conditioning, as well as biomass conversion and use from pilot cases growing various crops The SEEMLA approach of marginal lands evaluation will provide private and public stakeholders with necessary guidance for selecting suitable lands and implementing efficient exploitation strategies for bioenergy production, on the basis of sound environmental and socio-economic criteria.

Technical specification improvement through safety margin considerations

International Nuclear Information System (INIS)

Howard, R.C.; Jansen, R.L.

1986-01-01

Westinghouse has developed an approach for utilizing safety analysis margin considerations to improve plant operability through technical specification revision. This approach relies on the identification and use of parameter interrelations and sensitivities to identify acceptable operating envelopes. This paper summarizes technical specification activities to date and presents the use of safety margin considerations as another viable method to obtain technical specification improvement

Marginal microleakage of resin-modified glass-ionomer and composite resin restorations: Effect of using etch-and-rinse and self-etch adhesives

Directory of Open Access Journals (Sweden)

Maryam Khoroushi

2012-01-01

Full Text Available Objectives: Previous studies have shown that dental adhesives increase the bond strength of resin-modified glass-ionomer (RMGI restorative materials to dentin. This in vitro study has evaluated the effect of etch-and-rinse and self-etch bonding systems v/s cavity conditioner, and in comparison to similar composite resin restorations on maintaining the marginal sealing of RMGI restorations. Materials and Methods: 98 rectangular cavities (2.5×3×1.5 mm were prepared on buccal and palatal aspects of 49 human maxillary premolars, randomly divided into 7 groups (N=14. The cavities in groups 1, 2 and 3 were restored using a composite resin (APX. The cavities in groups 4, 5, 6 and 7 were restored using a resin-modified glass-ionomer (Fuji II LC. Before restoring, adhesive systems (Optibond FL = OFL, three-step etch-and-rinse; One Step Plus = OSP, two-step etch-and-rinse; Clearfil Protect Bond = CPB, two-step self-etch were used as bonding agents in groups 1-6 as follow: OFL in groups 1 and 4, OSP in groups 2 and 5, and CPB in groups 3 and 6, respectively. The specimens in group 7 were restored with GC cavity conditioner and Fuji II LC. All the specimens were thermo-cycled for 1000 cycles. Microleakage scores were determined using dye penetration method. Statistical analyzes were carried out with Kruskal-Wallis and Mann-Whitney U tests (α=0.05. Results: There were significant differences in microleakage scores at both enamel and dentinal margins between the study groups (P<0.05. The lowest microleakage scores at enamel and dentin margins of RMGI restorations were observed in group 6. Conclusion: Use of two-step self-etch adhesive, prior to restoring cervical cavities with RMGIC, seems to be more efficacious than the conventional cavity conditioner in decreasing marginal microleakage.

The role of regional economic integrations for trade margins: A case of Croatia

Directory of Open Access Journals (Sweden)

Katja Zajc Kejžar

2016-06-01

Full Text Available The goal of this investigation is to research the development of intensive and extensive trade margins on product-country level data for Croatia during the period 2000–2012. Hypothesis of our paper is that RTAs-induced trade liberalization will have heterogeneous effects on particular product groups with indirect implications on national welfare. Static and dynamic gravity trade models are used on panel data accounting for over 90% of total trade during the observed period. Estimations of the trade gravity model and trade margins showed that while SAA and CEFTA arrangements positively affected different measures of intensive and extensive trade margins, specially exports and imports of consumption products, effects on trade in intermediate and capital goods were relatively subdued. This suggests a tendency for market-seeking rather than efficiency-seeking behaviour of Croatia’s trade sector. When comparing the results for two trade agreements using dynamic model, we find that SAA primarily affected trade in consumption goods while effects of CEFTA are more evenly dispersed across different product groups. Main conclusion of the paper is that Croatia’s policy makers should try to keep the preferential status of Croatia within the CEFTA market in the medium term, focusing on the Croatian economy.

Pattern of Failure After Limited Margin Radiotherapy and Temozolomide for Glioblastoma

International Nuclear Information System (INIS)

McDonald, Mark W.; Shu, Hui-Kuo G.; Curran, Walter J.; Crocker, Ian R.

2011-01-01

Purpose: To evaluate the pattern of failure after limited margin radiotherapy for glioblastoma. Methods and Materials: We analyzed 62 consecutive patients with newly diagnosed glioblastoma treated between 2006 and 2008 with standard fractionation to a total dose of 60Gy with concurrent temozolomide (97%) or arsenic trioxide (3%). The initial clinical target volume included postoperative T2 abnormality with a median margin of 0.7cm. The boost clinical target volume included residual T1-enhancing tumor and resection cavity with a median margin of 0.5cm. Planning target volumes added a 0.3- or 0.5-cm margin to clinical target volumes. The total boost planning target volume (PTV boost ) margin was 1cm or less in 92% of patients. The volume of recurrent tumor (new T1 enhancement) was categorized by the percent within the 60-Gy isodose line as central (>95%), infield (81-95%), marginal (20-80%), or distant ( boost with a 2.5-cm margin were created for each patient. Results: With a median follow-up of 12 months, radiographic tumor progression developed in 43 of 62 patients. Imaging was available for analysis in 41: 38 (93%) had central or infield failure, 2 (5%) had marginal failure, and 1 (2%) had distant failure relative to the 60-Gy isodose line. The treated PTV boost (median, 140cm 3 ) was, on average, 70% less than the PTV boost with a 2.5-cm margin (median, 477cm 3 ) (p boost margin of 1cm or less did not appear to increase the risk of marginal and/or distant tumor failures compared with other published series. With careful radiation planning and delivery, it appears that treatment margins for glioblastoma can be reduced.

Posterior reversible encephalopathy syndrome following an inadvertent dural puncture during an emergency laparotomy for ischemic colitis – a case report

Directory of Open Access Journals (Sweden)

Shah R

2014-01-01

Full Text Available Reena Shah, Agnieszka Kubisz-Pudelko, Jeremy Reid Yeovil District Hospital, Yeovil, UK Abstract: Posterior reversible encephalopathy syndrome (PRES is a clinico-neuroradiological syndrome characterized by various symptoms of neurological disease. It has commonly been reported in association with acute hypertension, pre-eclampsia, eclampsia, sepsis, and exposure to immunosuppressants. Here, we report on a normotensive woman who developed a severe frontal headache, visual disturbances, and hypertension 3 days after undergoing an emergency laparotomy for ischemic colitis during which she suffered an inadvertent dural puncture. Neuro-imaging revealed features consistent with PRES. The patient went on to make a good recovery, being discharged 21 days postoperatively, with only minor visual disturbances and memory problems. This case highlights the importance of awareness of PRES to all specialties. On reviewing the literature, we feel that PRES may be a potential differential diagnosis to post-procedural neurological symptoms in those patients undergoing routine procedures such as spinal anesthetics or lumbar punctures. Keywords: PRES, neurological disease, lumbar puncture, spinal anesthetic

Positive Margins by Oropharyngeal Subsite in Transoral Robotic Surgery for T1/T2 Squamous Cell Carcinoma.

Science.gov (United States)

Persky, Michael J; Albergotti, William G; Rath, Tanya J; Kubik, Mark W; Abberbock, Shira; Geltzeiler, Mathew; Kim, Seungwon; Duvvuri, Umamaheswar; Ferris, Robert L

2018-04-01

Objective To compare positive margin rates between the 2 most common subsites of oropharyngeal transoral robotic surgery (TORS), the base of tongue (BOT) and the tonsil, as well as identify preoperative imaging characteristics that predispose toward positive margins. Study Design Case series with chart review. Setting Tertiary care referral center. Subjects and Methods We compared the final and intraoperative positive margin rate between TORS resections for tonsil and BOT oropharyngeal squamous cell carcinoma (OPSCC), as well as the effect of margins on treatment. A blinded neuroradiologist examined the preoperative imaging of BOT tumors to measure their dimensions and patterns of spread and provided a prediction of final margin results. Results Between January 2010 and May 2016, a total of 254 patients underwent TORS for OPSCC. A total of 140 patients who underwent TORS for T1/T2 OPSCC met inclusion criteria. A final positive margin is significantly more likely for BOT tumors than tonsil tumors (19.6% vs 4.5%, respectively, P = .004) and likewise for intraoperative margins of BOT and tonsil tumors (35.3% vs 12.4%, respectively; P = .002). A positive final margin is 10 times more likely to receive chemoradiation compared to a negative margin, controlling for extracapsular spread and nodal status (odds ratio, 9.6; 95% confidence interval, 1.6-59.6; P = .02). Preoperative imaging characteristics and subjective radiologic examination of BOT tumors did not correlate with final margin status. Conclusion Positive margins are significantly more likely during TORS BOT resections compared to tonsil resections. More research is needed to help surgeons predict which T1/T2 tumors will be difficult to completely extirpate.

The effect of location and facility demand on the marginal cost of delivered wood chips from energy crops: A case study of the state of Tennessee

International Nuclear Information System (INIS)

Graham, R.L.; Liu, W.; Downing, M.; Noon, C.; Daly, M.; Moore, A.

1995-01-01

Cost-supply curves for delivered wood chips from short rotation woody crops were calculated for 21 regularly-spaced locations spanning the state of Tennessee. These curves were used to systematically evaluate the combined effects of location and facility demand on wood chip feedstock costs in Tennessee. The cost-supply curves were developed using BRAVO, a GIS-based decision support system which calculates marginal cost of delivering wood chips to a specific location given road network maps and maps of farmgate prices and supplies of woody chips from short rotation energy crops. Marginal costs of delivered chips varied by both facility location in the state and facility demand. Marginal costs were lowest in central Tennessee unless the facility demand was greater than 2.7 million dry Mg per year (3 million dry tons per year) in which case west Tennessee was the lowest cost region. Marginal costs rose rapidly with increasing facility demand in the mountainous eastern portion of the state. Transportation costs accounted for 18 to 29% of the delivered cost and ranged between $8 and $18/dry Mg ($7 and $16/dry ton). Reducing the expected farmer participation rate from 100% to 50% or 25% dramatically raised the marginal costs of feedstock supply in the east and central regions of the state. The analysis demonstrates the need to use geographically-specific information when projecting the potential costs and supplies of biomass feedstock

Studying media at The Margins: learning from the field

Directory of Open Access Journals (Sweden)

Clemencia Rodríguez

2016-07-01

Full Text Available This article, informed by ethnographic research on media at the margins, proposes a shift in perspective at several different levels: 1 instead of focusing on individual technologies, our research should examine how grassroots communicators operating at the margins exist in a media ecology that offers different potentialities in each historical situation; 2 instead of trying to determine if the media technologies used at the margin are old or new, digital or not digital, we need to explore how embedded community communicators detect local information or communication needs and use available technologies to address these needs; 3 our research on media at the margins should shed light on how grassroots communicators re-invent, hybridize, converge, and bridge technologies from one platform to another. In sum, understanding media at the margins is about embracing complexity, maintaining the notion of media ecologies, and understanding how grassroots communicators, deeply embedded in local contexts, wedge media technologies into everyday life.

EFFECT OF PLACEMENT TECHNIQUES, FLOWABLE COMPOSITE , LINER AND FIBRE INSERTS ON MARGINAL MICROLEAKAGE OF CLASS II COMPOSITE RESTORATIONS

Directory of Open Access Journals (Sweden)

Anupriya

2015-08-01

Full Text Available AIM : T he aim of this study was to evaluate effect of placement techniques, flow able composite, and fiber inserts in marginal adaptation of class II composite restorations. MATERIALS AND METHODS : 120 class II box cavities were prepared on both mesial and distal surfaces of extracted human molars. The prepared teeth were randomly assigned to 6 groups : 1 bulk insertion . ( S ingle increment, 2 O blique incremental placement technique, 3 Centripetal incremental placement technique . 4 S plit horizontal incremental placement technique . 5 flow able composite as gingival increment 6 ribbond fiber insert in gingival increment . The preparations were restored with a total etch adhesive (Adper Single Bond, 3M ESPE and nano composite (Z350, 3M ESPE. Specimens were isola ted with nail varnish except for a 2 - mm - wide rim around the restoration and thermocycled (1,000 thermal cycles, 5°C/55°C; 30 - second dwell time. The specimens were immersed in a solution of 2% methylene blue dye for 24 hours. The teeth were sectioned longi tudinally, observed under stereomicroscope and evaluated for microleakage using an ordinal scale of 0 to 4. The microleakage scores obtained from gingival walls were analyzed with Kruskal - Wallis and Mann Whitney nonparametric tests. RESULTS: Among all plac ement techniques split incremental technique showed least microleakage scores . The group that used flowable composite liner did not show significant reduction in microleakage and group with fiber inserts showed significant decrease in microleakage scores. CONCLUSION : None of the techniques eliminated marginal microleakage in class II composite restorations . However, the split incremental technique and group with fiber inserts showed significantly lower microleakage at gingival margin when compared to other groups

Uplift history of a transform continental margin revealed by the stratigraphic record: The case of the Agulhas transform margin along the Southern African Plateau

Science.gov (United States)

Baby, Guillaume; Guillocheau, François; Boulogne, Carl; Robin, Cécile; Dall'Asta, Massimo

2018-04-01

The south and southeast coast of southern Africa (from 28°S to 33°S) forms a high-elevated transform passive margin bounded to the east by the Agulhas-Falkland Fracture Zone (AFFZ). We analysed the stratigraphic record of the Outeniqua and Durban (Thekwini) Basins, located on the African side of the AFFZ, to determine the evolution of these margins from the rifting stage to present-day. The goal was to reconstruct the strike-slip evolution of the Agulhas Margin and the uplift of the inland high-elevation South African Plateau. The Agulhas transform passive margin results from four successive stages: Rifting stage, from Late Triassic to Early Cretaceous ( 200?-134 Ma), punctuated by three successive rifting episodes related to the Gondwana breakup; Wrench stage (134-131 Ma), evidenced by strike- and dip-slip deformations increasing toward the AFFZ; Active transform margin stage (131-92 Ma), during which the Falkland/Malvinas Plateau drifts away along the AFFZ, with an uplift of the northeastern part of the Outeniqua Basin progressively migrating toward the west; Thermal subsidence stage (92-0 Ma), marked by a major change in the configuration of the margin (onset of the shelf-break passive margin morphology). Two main periods of uplift were documented during the thermal subsidence stage of the Agulhas Margin: (1) a 92 Ma short-lived margin-scale uplift, followed by a second one at 76 Ma located along the Outeniqua Basin and; (2) a long-lasting uplift from 40 to 15 Ma limited to the Durban (Thekwini) Basin. This suggests that the South African Plateau is an old Upper Cretaceous relief (90-70 Ma) reactivated during Late Eocene to Early Miocene times (40-15 Ma).

The effect of simple nitrogen fertilizer recommendation strategies on product carbon footprint and gross margin of wheat and maize production in the North China Plain.

Science.gov (United States)

Ha, Nan; Feike, Til; Back, Hans; Xiao, Haifeng; Bahrs, Enno

2015-11-01

Overuse of nitrogen (N) fertilizer constitutes the major issue of current crop production in China, exerting a substantial effect on global warming through massive emission of greenhouse gas (GHG). Despite the ongoing effort, which includes the promotion of technologically sophisticated N management schemes, farmers' N rates maintain at excessive rates. Therefore the current study tests three simple and easily to apply N fertilizer recommendation strategies, which could be implemented on large scale through the existing agricultural advisory system of China, at comparatively low cost. Building on a detailed crop production dataset of 65 winter wheat (WW) and summer maize (SM) producing farm households of the North China Plain, scenario analysis is applied. The effects of the three N strategies under constant and changing yield levels on product carbon footprint (PCF) and gross margin (GM) are determined for the production condition of every individual farm household. The N fixed rate strategy realized the highest improvement potential in PCF and GM in WW; while the N coefficient strategy performed best in SM. The analysis furthermore revealed that improved N management has a significant positive effect on PCF, but only a marginal and insignificant effect on GM. On the other side, a potential 10% yield loss would have only a marginal effect on PCF, but a detrimental effect on farmers' income. With farmers currently applying excessive N rates as "cheap insurance" against potential N limitation, it will be of vital importance to avoid any yield reductions (caused by N limitation) and respective severe financial losses, when promoting and implementing advanced fertilization strategies. To achieve this, it is furthermore recommended to increase the price of fertilizer, improve the agricultural extensions system, and recognize farmers' fertilizer related decision-making processes as key research areas. Copyright © 2015 Elsevier Ltd. All rights reserved.

Municipalities' Priority Problems and Prospect of Establishing Ordinance to Measures for Marginal Hamlets

Science.gov (United States)

Nakanishi, Mayumi; Hoshino, Satoshi; Hashimoto, Shizuka; Kuki, Yasuaki

The problems of Marginal Hamlets are getting worse, in which more than half of the population is over 65 and community-based life is difficult. To contribute to effective policy making, we conducted a questionnaire survey to members of the National Liaison Council of ‘Suigen no Sato’ constituted to share information about problems and effective counter measures for marginal hamlets. Our study clarified that first, most of respondents had common problems such as lack of job-opportunities and animal damage on farm, and second, though most of respondents recognized the effectiveness of selecting target communities in policy implementations, it is difficult for municipal governments to establish such ordinance provided that councilors and those who were not living in areas of policy target wouldn't agree with it. Finally, we pointed out the roles of national and prefectural governments to help municipal governments effectively cope with such entangled situations.

The determinants of intermediaries’ power over farmers’ margin-related activities

DEFF Research Database (Denmark)

Xhoxhi, Orjon; Pedersen, Søren Marcus; Lind, Kim Martin Hjorth

2014-01-01

This paper investigates the determinants of intermediaries’ power over farmers’ margin-related activities in Adana, Turkey. In doing so, a holistic model of intermediaries’ power over farmers’ margin-related activities is proposed. The objective of this model is to contribute to a better understa......This paper investigates the determinants of intermediaries’ power over farmers’ margin-related activities in Adana, Turkey. In doing so, a holistic model of intermediaries’ power over farmers’ margin-related activities is proposed. The objective of this model is to contribute to a better...

Volcanic passive margins: another way to break up continents.

Science.gov (United States)

Geoffroy, L; Burov, E B; Werner, P

2015-10-07

Two major types of passive margins are recognized, i.e. volcanic and non-volcanic, without proposing distinctive mechanisms for their formation. Volcanic passive margins are associated with the extrusion and intrusion of large volumes of magma, predominantly mafic, and represent distinctive features of Larges Igneous Provinces, in which regional fissural volcanism predates localized syn-magmatic break-up of the lithosphere. In contrast with non-volcanic margins, continentward-dipping detachment faults accommodate crustal necking at both conjugate volcanic margins. These faults root on a two-layer deformed ductile crust that appears to be partly of igneous nature. This lower crust is exhumed up to the bottom of the syn-extension extrusives at the outer parts of the margin. Our numerical modelling suggests that strengthening of deep continental crust during early magmatic stages provokes a divergent flow of the ductile lithosphere away from a central continental block, which becomes thinner with time due to the flow-induced mechanical erosion acting at its base. Crustal-scale faults dipping continentward are rooted over this flowing material, thus isolating micro-continents within the future oceanic domain. Pure-shear type deformation affects the bulk lithosphere at VPMs until continental breakup, and the geometry of the margin is closely related to the dynamics of an active and melting mantle.

Preoperative imaging and surgical margins in maxillectomy patients

NARCIS (Netherlands)

Kreeft, Anne Marijn; Smeele, Ludwig E.; Rasch, Coen R. N.; Hauptmann, Michael; Rietveld, Derk H. F.; Leemans, C. René; Balm, Alfons J. M.

2012-01-01

Background High rates of positive surgical margins are reported after a maxillectomy. A large part of tumors that are preoperatively considered operable can thus not be resected with tumor-free margins. Methods This was a retrospective study on medical files of 69 patients that underwent

STUDI PERBANDINGAN ANTARA ALGORITMA BIVARIATE MARGINAL DISTRIBUTION DENGAN ALGORITMA GENETIKA

Directory of Open Access Journals (Sweden)

Chastine Fatichah

2006-01-01

Full Text Available Bivariate Marginal Distribution Algorithm is extended from Estimation of Distribution Algorithm. This heuristic algorithm proposes the new approach for recombination of generate new individual that without crossover and mutation process such as genetic algorithm. Bivariate Marginal Distribution Algorithm uses connectivity variable the pair gene for recombination of generate new individual. Connectivity between variable is doing along optimization process. In this research, genetic algorithm performance with one point crossover is compared with Bivariate Marginal Distribution Algorithm performance in case Onemax, De Jong F2 function, and Traveling Salesman Problem. In this research, experimental results have shown performance the both algorithm is dependence of parameter respectively and also population size that used. For Onemax case with size small problem, Genetic Algorithm perform better with small number of iteration and more fast for get optimum result. However, Bivariate Marginal Distribution Algorithm perform better of result optimization for case Onemax with huge size problem. For De Jong F2 function, Genetic Algorithm perform better from Bivariate Marginal Distribution Algorithm of a number of iteration and time. For case Traveling Salesman Problem, Bivariate Marginal Distribution Algorithm have shown perform better from Genetic Algorithm of optimization result. Abstract in Bahasa Indonesia : Bivariate Marginal Distribution Algorithm merupakan perkembangan lebih lanjut dari Estimation of Distribution Algorithm. Algoritma heuristik ini mengenalkan pendekatan baru dalam melakukan rekombinasi untuk membentuk individu baru, yaitu tidak menggunakan proses crossover dan mutasi seperti pada Genetic Algorithm. Bivariate Marginal Distribution Algorithm menggunakan keterkaitan pasangan variabel dalam melakukan rekombinasi untuk membentuk individu baru. Keterkaitan antar variabel tersebut ditemukan selama proses optimasi berlangsung. Aplikasi yang

Marginal adaptation and CAD-CAM technology: A systematic review of restorative material and fabrication techniques.

Science.gov (United States)

Papadiochou, Sofia; Pissiotis, Argirios L

2018-04-01

The comparative assessment of computer-aided design and computer-aided manufacturing (CAD-CAM) technology and other fabrication techniques pertaining to marginal adaptation should be documented. Limited evidence exists on the effect of restorative material on the performance of a CAD-CAM system relative to marginal adaptation. The purpose of this systematic review was to investigate whether the marginal adaptation of CAD-CAM single crowns, fixed dental prostheses, and implant-retained fixed dental prostheses or their infrastructures differs from that obtained by other fabrication techniques using a similar restorative material and whether it depends on the type of restorative material. An electronic search of English-language literature published between January 1, 2000, and June 30, 2016, was conducted of the Medline/PubMed database. Of the 55 included comparative studies, 28 compared CAD-CAM technology with conventional fabrication techniques, 12 contrasted CAD-CAM technology and copy milling, 4 compared CAD-CAM milling with direct metal laser sintering (DMLS), and 22 investigated the performance of a CAD-CAM system regarding marginal adaptation in restorations/infrastructures produced with different restorative materials. Most of the CAD-CAM restorations/infrastructures were within the clinically acceptable marginal discrepancy (MD) range. The performance of a CAD-CAM system relative to marginal adaptation is influenced by the restorative material. Compared with CAD-CAM, most of the heat-pressed lithium disilicate crowns displayed equal or smaller MD values. Slip-casting crowns exhibited similar or better marginal accuracy than those fabricated with CAD-CAM. Cobalt-chromium and titanium implant infrastructures produced using a CAD-CAM system elicited smaller MD values than zirconia. The majority of cobalt-chromium restorations/infrastructures produced by DMLS displayed better marginal accuracy than those fabricated with the casting technique. Compared with copy

Influence of Different Ceramic Systems on Marginal Misfit.

Science.gov (United States)

Vargas, S P; Neves, A C C; Vitti, R; Amaral, M; Henrique, M N; Silva-Concílio, L R

2017-09-01

the aim of this study was to evaluate the marginal misfit at the interface between a ceramic coping and its abutment. Twenty-four specimens were made with solid abutments. The specimens were divided into 3 groups according to the ceramic system (n = 8): Lava (zirconia), IPS e.max Press (lithium disilicate), and IPS Empress Esthetic (leucite). All copings were cemented with resin luting agent (RelyX U200) and the marginal misfit were evaluated at 3 different times: initial, after cementation, and after mechanical cycling using a linear measuring microscope (Measuring Microscope STM-Olympus) at a magnification of 40x. All specimens were subjected to mechanical cycling (1 million cycles) by an universal testing machine (Instron 8800). The results were statistically analyzed using Analysis of Variance and Student's t-test (α = 0.05). all groups showed an increase in the marginal misfit after cementation. The lithium disilicate group demonstrated the lowest interacial gap values at each evaluation (p = 0.001). The zirconia and leucite groups showed similar interfacial gap values (initial, p = 0.244; and post cementation, p = 0.751). the cementation increase the marginal misfit, but the mechanical cycling did not influence the marginal misfit of the ceramics systems evaluated. Copyright© 2017 Dennis Barber Ltd.

A case of distal extrahepatic cholangiocarcinoma with two positive resection margins.

Science.gov (United States)

Warner, Wayne A; Ramcharan, Wesley; Harnanan, Dave; Umakanthan, Srikanth; Maharaj, Ravi

2016-11-01

Cholangiocarcinoma is an uncommon primary malignancy of the biliary tract that is challenging to diagnose and treat effectively due to its relatively silent and late clinical presentation. The present study reports a case of a 60-year-old male with distal extrahepatic cholangiocarcinoma with a 3-week history of painless obstructive jaundice symptoms and subjective weight loss. Imaging revealed an obstructing lesion in the common bile duct, just distal to the entrance of the cystic duct. Pathology revealed moderately differentiated cholangiocarcinoma with two positive proximal resection margins. The two positive resection margins presented a challenge during surgery and points to an urgent need for further studies to better illuminate diagnostic and therapeutic options for patients with similar clinicopathological presentation.

Determinants of banks’ net interest margins in Central and Eastern Europe

Directory of Open Access Journals (Sweden)

Tomislav Rizdak

2013-03-01

Full Text Available This research analyzes the main determinants of the net interest margin of banks operating in Central and Eastern European (CEE countries in the period from 1999 to 2010. The results reveal several main drivers of net interest margins in the CEE. Prior to 2008 the net interest margins declined primarily due to strong capital inflows and stable macroeconomic environment. In the crisis period, significant rise in government debt accompanied by the increase in macroeconomic risks and abating capital inflows were pushing margins up while other factors such as low credit demand, higher capitalization and significantly increased share of non-performing loans pressured banks’ margins down. The results also confirm the important contribution of higher efficiency to lowering banks’ margins.

Marginal Assessment of Crowns by the Aid of Parallel Radiography

Directory of Open Access Journals (Sweden)

Farnaz Fattahi

2015-03-01

Full Text Available Introduction: Marginal adaptation is the most critical item in long-term prognosis of single crowns. This study aimed to assess the marginal quality as well asthe discrepancies in marginal integrity of some PFM single crowns of posterior teeth by employing parallel radiography in Shiraz Dental School, Shiraz, Iran. Methods: In this descriptive study, parallel radiographies were taken from 200 fabricated PFM single crowns of posterior teeth after cementation and before discharging the patient. To calculate the magnification of the images, a metallic sphere with the thickness of 4 mm was placed in the direction of the crown margin on the occlusal surface. Thereafter, the horizontal and vertical space between the crown margins, the margin of preparations and also the vertical space between the crown margin and the bone crest were measured by using digital radiological software. Results: Analysis of data by descriptive statistics revealed that 75.5% and 60% of the cases had more than the acceptable space (50µm in the vertical (130±20µm and horizontal (90±15µm dimensions, respectively. Moreover, 85% of patients were found to have either horizontal or vertical gap. In 77% of cases, the margins of crowns invaded the biologic width in the mesial and 70% in distal surfaces. Conclusion: Parallel radiography can be expedient in the stage of framework try-in to yield some important information that cannot be obtained by routine clinical evaluations and may improve the treatment prognosis

Supervised linear dimensionality reduction with robust margins for object recognition

Science.gov (United States)

Dornaika, F.; Assoum, A.

2013-01-01

Linear Dimensionality Reduction (LDR) techniques have been increasingly important in computer vision and pattern recognition since they permit a relatively simple mapping of data onto a lower dimensional subspace, leading to simple and computationally efficient classification strategies. Recently, many linear discriminant methods have been developed in order to reduce the dimensionality of visual data and to enhance the discrimination between different groups or classes. Many existing linear embedding techniques relied on the use of local margins in order to get a good discrimination performance. However, dealing with outliers and within-class diversity has not been addressed by margin-based embedding method. In this paper, we explored the use of different margin-based linear embedding methods. More precisely, we propose to use the concepts of Median miss and Median hit for building robust margin-based criteria. Based on such margins, we seek the projection directions (linear embedding) such that the sum of local margins is maximized. Our proposed approach has been applied to the problem of appearance-based face recognition. Experiments performed on four public face databases show that the proposed approach can give better generalization performance than the classic Average Neighborhood Margin Maximization (ANMM). Moreover, thanks to the use of robust margins, the proposed method down-grades gracefully when label outliers contaminate the training data set. In particular, we show that the concept of Median hit was crucial in order to get robust performance in the presence of outliers.

Influence of margin segmentation and anomalous volcanism upon the break-up of the Hatton Bank rifted margin, west of the UK

Science.gov (United States)

Elliott, G. M.; Parson, L. M.

2007-12-01

The Hatton Bank margin, flanking the Iceland Basin is a widely cited example of a volcanic rifted margin. Prior to this study insights into the break-up history of the margin have been limited to profiles in the north and south, yet whilst valuable, the along margin tectono-magmatic variability has not been revealed. Over 5660 line km of high quality reflection seismic profiles with supplementary multibeam bathymetry were collected to support the UK's claim to Hatton region under the United Nations Convention on Law of the Sea (UNCLOS). Integration of this new data with existing profiles, allowed the margin to be divided into three segments, each of which are flanked by oceanic crust with a smooth upper surface and internal dipping reflectors. The southernmost segment is characterised by a series of inner and outer seaward dipping reflector (SDR) packages, which are separated by an outer high feature. The outer SDR are truncated by Endymion Spur, a chain of steep sided, late stage volcanic cones linked with necks. The central sector has no inner SDR package and is characterised by the presence of a highly intruded continental block, the Hatton Bank Block (HBB). The northern sector is adjacent to Lousy Bank, with a wider region of SDR recognised than to the south and a high amount of volcanic cones imaged. The variations in the distribution of the SDR's along the margin, the presence of the HBB and Endymion Spur all suggest that the break-up process was not uniform alongstrike. The division of the margin into three sectors reveals that structural segmentation played an important role in producing the variations along the margin. Break- up initiated in the south and progressed north producing the SDR packages witnessed, when the HBB was encountered the focus of break-up moved seaward of the block. The northern sector was closer to the Iceland Hotspot and hence a greater amount of volcanism is encountered. The smooth oceanic basement also indicates a high thermal flux

Margins in high temperature leak-before-break assessments

Energy Technology Data Exchange (ETDEWEB)

Budden, P.J.; Hooton, D.G.

1997-04-01

Developments in the defect assessment procedure R6 to include high-temperature mechanisms in Leak-before-Break arguments are described. In particular, the effect of creep on the time available to detect a leak and on the crack opening area, and hence leak rate, is discussed. The competing influence of these two effects is emphasized by an example. The application to Leak-before-Break of the time-dependent failure assessment diagram approach for high temperature defect assessment is then outlined. The approach is shown to be of use in assessing the erosion of margins by creep.

Margins in high temperature leak-before-break assessments

International Nuclear Information System (INIS)

Budden, P.J.; Hooton, D.G.

1997-01-01

Developments in the defect assessment procedure R6 to include high-temperature mechanisms in Leak-before-Break arguments are described. In particular, the effect of creep on the time available to detect a leak and on the crack opening area, and hence leak rate, is discussed. The competing influence of these two effects is emphasized by an example. The application to Leak-before-Break of the time-dependent failure assessment diagram approach for high temperature defect assessment is then outlined. The approach is shown to be of use in assessing the erosion of margins by creep

Slope failure of chalk channel margins

DEFF Research Database (Denmark)

Gale, A.; Anderskouv, Kresten; Surlyk, Finn

2015-01-01

provide evidence for recurring margin collapse of a long-lived Campanian channel. Compressionally deformed and thrust chalk hardgrounds are correlated to thicker, non-cemented chalk beds that form a broad, gentle anticline. These chalks represent a slump complex with a roll-over anticline of expanded, non......-cemented chalk in the head region and a culmination of condensed hardgrounds in the toe region. Observations strongly suggest that the slumping represents collapse of a channel margin. Farther northwards, the contemporaneous succession shows evidence of small-scale penecontemporaneous normal faulting towards...

In-vivo effects of lipopolysaccharide on lymphoid and non-lymphoid cells in the mouse spleen. Migration of marginal metallophils towards the follicle centres

NARCIS (Netherlands)

Groeneveld, P. H.; van Rooijen, N.; Eikelenboom, P.

1983-01-01

In mice marginal metallophils are located at the periphery of the white pulp along the inner border of the marginal sinus. These cells have a weak phagocytic capacity but their function is still unclear. In the present study evidence is given that marginal metallophils migrate from the periphery of

Perennial Grass Bioenergy Cropping on Wet Marginal Land

NARCIS (Netherlands)

Das, Srabani; Teuffer, Karin; Stoof, Cathelijne R.; Walter, Michael F.; Walter, M.T.; Steenhuis, Tammo S.; Richards, Brian K.

2018-01-01

The control of soil moisture, vegetation type, and prior land use on soil health parameters of perennial grass cropping systems on marginal lands is not well known. A fallow wetness-prone marginal site in New York (USA) was converted to perennial grass bioenergy feedstock production. Quadruplicate

Circumferential resection margin (CRM) positivity after MRI assessment and adjuvant treatment in 189 patients undergoing rectal cancer resection.

Science.gov (United States)

Simpson, G S; Eardley, N; McNicol, F; Healey, P; Hughes, M; Rooney, P S

2014-05-01

The management of rectal cancer relies on accurate MRI staging. Multi-modal treatments can downstage rectal cancer prior to surgery and may have an effect on MRI accuracy. We aim to correlate the findings of MRI staging of rectal cancer with histological analysis, the effect of neoadjuvant therapy on this and the implications of circumferential resection margin (CRM) positivity following neoadjuvant therapy. An analysis of histological data and radiological staging of all cases of rectal cancer in a single centre between 2006 and 2011 were conducted. Two hundred forty-one patients had histologically proved rectal cancer during the study period. One hundred eighty-two patients underwent resection. Median age was 66.6 years, and male to female ratio was 13:5. R1 resection rate was 11.1%. MRI assessments of the circumferential resection margin in patients without neoadjuvant radiotherapy were 93.6 and 88.1% in patients who underwent neoadjuvant radiotherapy. Eighteen patients had predicted positive margins following chemoradiotherapy, of which 38.9% had an involved CRM on histological analysis. MRI assessment of the circumferential resection margin in rectal cancer is associated with high accuracy. Neoadjuvant chemoradiotherapy has a detrimental effect on this accuracy, although accuracy remains high. In the presence of persistently predicted positive margins, complete resection remains achievable but may necessitate a more radical approach to resection.

Principals' Perceived Supervisory Behaviors Regarding Marginal Teachers in Two States

Science.gov (United States)

Range, Bret; Hewitt, Paul; Young, Suzie

2014-01-01

This descriptive study used an online survey to determine how principals in two states viewed the supervision of marginal teachers. Principals ranked their own evaluation of the teacher as the most important factor when identifying marginal teachers and relied on informal methods to diagnose marginal teaching. Female principals rated a majority of…

Novel maximum-margin training algorithms for supervised neural networks.

Science.gov (United States)

Ludwig, Oswaldo; Nunes, Urbano

2010-06-01

This paper proposes three novel training methods, two of them based on the backpropagation approach and a third one based on information theory for multilayer perceptron (MLP) binary classifiers. Both backpropagation methods are based on the maximal-margin (MM) principle. The first one, based on the gradient descent with adaptive learning rate algorithm (GDX) and named maximum-margin GDX (MMGDX), directly increases the margin of the MLP output-layer hyperplane. The proposed method jointly optimizes both MLP layers in a single process, backpropagating the gradient of an MM-based objective function, through the output and hidden layers, in order to create a hidden-layer space that enables a higher margin for the output-layer hyperplane, avoiding the testing of many arbitrary kernels, as occurs in case of support vector machine (SVM) training. The proposed MM-based objective function aims to stretch out the margin to its limit. An objective function based on Lp-norm is also proposed in order to take into account the idea of support vectors, however, overcoming the complexity involved in solving a constrained optimization problem, usually in SVM training. In fact, all the training methods proposed in this paper have time and space complexities O(N) while usual SVM training methods have time complexity O(N (3)) and space complexity O(N (2)) , where N is the training-data-set size. The second approach, named minimization of interclass interference (MICI), has an objective function inspired on the Fisher discriminant analysis. Such algorithm aims to create an MLP hidden output where the patterns have a desirable statistical distribution. In both training methods, the maximum area under ROC curve (AUC) is applied as stop criterion. The third approach offers a robust training framework able to take the best of each proposed training method. The main idea is to compose a neural model by using neurons extracted from three other neural networks, each one previously trained by

Quantifying Safety Margin Using the Risk-Informed Safety Margin Characterization (RISMC)

Energy Technology Data Exchange (ETDEWEB)

Grabaskas, David; Bucknor, Matthew; Brunett, Acacia; Nakayama, Marvin

2015-04-26

The Risk-Informed Safety Margin Characterization (RISMC), developed by Idaho National Laboratory as part of the Light-Water Reactor Sustainability Project, utilizes a probabilistic safety margin comparison between a load and capacity distribution, rather than a deterministic comparison between two values, as is usually done in best-estimate plus uncertainty analyses. The goal is to determine the failure probability, or in other words, the probability of the system load equaling or exceeding the system capacity. While this method has been used in pilot studies, there has been little work conducted investigating the statistical significance of the resulting failure probability. In particular, it is difficult to determine how many simulations are necessary to properly characterize the failure probability. This work uses classical (frequentist) statistics and confidence intervals to examine the impact in statistical accuracy when the number of simulations is varied. Two methods are proposed to establish confidence intervals related to the failure probability established using a RISMC analysis. The confidence interval provides information about the statistical accuracy of the method utilized to explore the uncertainty space, and offers a quantitative method to gauge the increase in statistical accuracy due to performing additional simulations.

Marginal Iodine Deficiency Affects Dendritic Spine Development by Disturbing the Function of Rac1 Signaling Pathway on Cytoskeleton.

Science.gov (United States)

Min, Hui; Dong, Jing; Wang, Yi; Wang, Yuan; Yu, Ye; Shan, Zhongyan; Xi, Qi; Teng, Weiping; Chen, Jie

2017-01-01

Iodine deficiency (ID)-induced thyroid hormone (TH) insufficient during development leads to impairments of brain function, such as learning and memory. Marginal ID has been defined as subtle insufficiency of TH, characterized as low thyroxine (T 4 ) levels, whether marginal ID potentially had adverse effects on the development of hippocampus and the underlying mechanisms remain unclear. Thus, in the present study, we established Wistar rat models with ID diet during pregnancy and lactation. The effects of marginal ID on long-term potentiation (LTP) were investigated in the hippocampal CA1 region. To study the development of dendritic spines in pyramidal cells, Golgi-Cox staining was conducted on postnatal day (PN) 7, PN14, PN21, and PN28. The activation of Rac1 signaling pathway, which is essential for dendritic spine development by regulating actin cytoskeleton, was also investigated. Our results showed that marginal ID slightly reduced the field-excitatory postsynaptic potential (f-EPSP) slope and the population spike (PS) amplitude. Besides, the density of dendritic spines during the critical period of rat postnatal development was mildly decreased, and we found no significant change of spine morphology in marginal ID group. We also observed decreased activation of the Rac1 signaling pathway in pups subjected to maternal marginal ID. Our study may support the hypothesis that decreased T 4 induced by marginal ID results in slight impairments of LTP and leads to mild damage of dendritic spine development, which may be due to abnormal regulation of Rac1 signaling pathway on cytoskeleton.

Development and function of the splenic marginal zone

NARCIS (Netherlands)

Mebius, Reina E.; Nolte, Martijn A.; Kraal, Georg

2004-01-01

The marginal zone of the spleen is a crucial region where blood-borne pathogens are sequestered by macrophages with unique arrays of scavenger molecules. In addition, a special population of B cells, which is capable of rapid activation, resides in this region. Marginal zone B cells and macrophages

Marginal Leakage of Class V Composite Resin Restorations

Directory of Open Access Journals (Sweden)

Maryam Khoroushi

2018-01-01

Full Text Available >Introduction: Marginal leakage is one of the significant causes of restoration failure. This in-vitro study was conducted to compare cone beam computed tomography (CBCT and dye-penetration methods for determining marginal leakage at gingival surface of class V resin composite restorations.Materials and Methods: Class V cavities were prepared on the buccal surfaces of nineteen caries-free extracted human molar teeth. Cavities were conditioned and filled. The teeth were immersed in a 50% w/w aqueous silver nitrate solution for 24 h and were taken out and rinsed with distilled water. Then, they were put into a developing solution. Whole specimens were first viewed with CBCT and were then sectioned and evaluated by stereomicroscope.Results: Measurement of agreement between CBCT and stereomicroscope revealed that 15 (78.9% teeth had score 0, 1 (5.3% tooth had score 1, and 1 (5.3% tooth had score 2 in both techniques. Measurement of agreement between CBCT and stereomicroscope techniques, in the detection of marginal leakage, was 89.5% (Kappa coefficient = 0.627, P = 0.00. The Wilcoxon paired rank test revealed no significant difference between the results of CBCT and stereomicroscope in measuring the leakage at gingival margin (P = 0.157.Conclusion: Considering the limitations of the study, there was no significant difference between the results of CBCT and stereomicroscope in measuring the leakage at gingival margin of class V composite restorations. CBCT can be used noninvasively to detect the marginal leakage of gingival wall of class V composite restorations using aqueous silver nitrate solution as a tracer.

Marginally Deformed Starobinsky Gravity

DEFF Research Database (Denmark)

Codello, A.; Joergensen, J.; Sannino, Francesco

2015-01-01

We show that quantum-induced marginal deformations of the Starobinsky gravitational action of the form $R^{2(1 -\\alpha)}$, with $R$ the Ricci scalar and $\\alpha$ a positive parameter, smaller than one half, can account for the recent experimental observations by BICEP2 of primordial tensor modes....

Komorbiditet ved marginal parodontitis

DEFF Research Database (Denmark)

Holmstrup, Palle; Damgaard, Christian; Olsen, Ingar

2017-01-01

Nærværende artikel præsenterer en oversigt over den foreliggende væsentligste viden om sammenhængen mellem marginal parodontitis og en række medicinske sygdomme, herunder hjerte-kar-sygdomme, diabetes mellitus, reumatoid arthritis, osteoporose, Parkinsons sygdom, Alzheimers sygdom, psoriasis og...

From marginality to further marginalization: Experiences from the victims of the July 2000 Payatas trashslide in the Philippines

Directory of Open Access Journals (Sweden)

JC Gaillard

2009-04-01

Full Text Available Victims of disasters are disproportionately drawn from the marginalized segments of society. Disaster victims are marginalized geographically because they live in hazardous places, socially because they are members of minority groups, economically because they are poor, and marginalized politically because their voice is disregarded by those with political power. #e victims of the July 2000 Payatas trash slide in the Philippines show all these characteristics. Most of the victims of the disaster were urban migrants who came all the way from their poor provinces to settle on the lower slopes of the largest dumpsite of the country. #ey scavenged recyclable materials to sell as a way to make a living, but their limited incomes did not allow them to a$ord safer locations for their homes, farther removed from the slopes of the dumpsite. On the morning of 10 July 2000, 300 of them lost their lives when a large section of the dumpsite collapsed in a massive debris %ow which buried their houses. In the aftermath of the disaster, the survivors who used to live on the dumpsite, and who were the poorest victims, were also those who were relocated by the Philippine government. In the present case, the most vulnerable families in the face of the trash slide were eventually those who had to su#er again from life-disrupting relocation while being the less able to recover quickly from the disaster. Daily incomes of relocated families are today much lower than those who remained in the vicinity of the dumpsite. For the victims of the July 2000 Payatas tragedy, poverty thus acted as a vicious, worsening circle which ranged from vulnerability to poor recovery, or from marginality to further marginalization.

Intraoperative monitoring of marginal mandibular nerve during neck dissection.

Science.gov (United States)

Tirelli, Giancarlo; Bergamini, Pier Riccardo; Scardoni, Alessandro; Gatto, Annalisa; Boscolo Nata, Francesca; Marcuzzo, Alberto Vito

2018-05-01

The purpose of this study was to assess the efficacy of intraoperative nerve integrity monitoring (NIM) to prevent marginal mandibular nerve injuries during neck dissection. This prospective study compared 36 patients undergoing NIM-assisted neck dissection from July 2014 to March 2015 to a cohort of 35 patients subjected to neck dissection over an identical period of time before the technique was introduced. We also assessed possible correlations between marginal mandibular nerve injuries and other factors, such as anthropometric measurements, presence of clinical neck metastases, type of neck dissection, and site of primary tumor. The incidence of marginal mandibular nerve paralyses was significantly lower among the group of patients undergoing NIM-assisted neck dissection (P = .021). There was no significant difference in the duration of the procedure, and the technique resulted in a limited increase of cost. No other factor seemed to influence the onset of marginal mandibular nerve palsy. In our opinion, NIM is a valuable aid for preventing marginal mandibular nerve injuries during neck dissection. © 2018 Wiley Periodicals, Inc.

Radiotherapy Results of Carcinoma of Cervix with positive Resection Margin

International Nuclear Information System (INIS)

Huh, Seung Jae; Kim, Dae Yong; Ahn, Yong Chan; Kim, Won Dong; Wu, Hong Gyun; Ha, Sung Whan; Kim, Il Han; Park, Charn Il

1996-01-01

Purpose : Patients with cervical cancer who have positive resection margins after radical hysterectomy are at increased risk for local recurrence. The results of postoperative pelvic radiotherapy for cervix cancer with positive resection margins were analyzed to evaluated the role of radiotherapy. Materials and Methods : Between 1979 and 1992, 60 patients of cervix carcinoma were treated with postoperative radiotherapy after radical hysterectomy because of positive vaginal(48 patients) or parametrial resection margins(12 patients). Patients were treated with external beam radiation therapy(EBRT) alone (12 patients) or EBRT plus vaginal ovoid irradiation (VOI) (48 patients). The median follow-up period was 5 months. Results : The 5-year actuarial disease free and overall survival rates for all patients were 75.2%, 84.1%, respectively. The overall recurrence rate was 23%(14/60). In 48 patients with positive vaginal resection margins, the pelvic recurrence was 8%(4/48). Distant metastasis was 15%(7/48). Of the 43 patients with positive vaginal resection margins treated with EBRT and VOI, recurrence rate was 21%(9/43), while recurrence rate was 40%(2/5) in the EBRT only treated group. In 12 patients with positive parametrial margins, three patients (25%) had distant metastases. The most significant prognostic factor was lymph node metastasis. Complications resulting from radiotherapy occurred at a rate of 32%(19/60) and grade III complications occurred in three patients (5%). Conclusion : Postoperative radiotherapy can produce excellent pelvic control rates in patients with positive resection margins. In patients with positive vaginal margins, whole pelvic EBRT and BOI is recommended

Marginal Bone Loss Around Early-Loaded SLA and SLActive Implants: Radiological Follow-Up Evaluation Up to 6.5 Years.

Science.gov (United States)

Şener-Yamaner, Işil Damla; Yamaner, Gökhan; Sertgöz, Atilla; Çanakçi, Cenk Fatih; Özcan, Mutlu

2017-08-01

The aim of this study was to compare marginal bone loss around early-loaded SLA and SLActive tissue-level implants (Straumann Dental Implants; Institut Straumann AG, Basel, Switzerland) after a mean of 81-month follow-up period. One hundred seven SLA and 68 SLActive implants were placed in 55 patients and loaded with final restoration after 8 and 3 weeks of healing time, respectively. Marginal bone loss around implants was determined radiographically at initial and after a mean observation time ranging between 20 and 81 months. The effect of location (mandible vs maxilla), smoking habit, sex, implant length and diameter, and the type of prosthesis on the marginal bone loss was evaluated. The overall cumulative survival rate was 98.2% being 99% for SLA implants and 97% for SLActive implants. After 20-month follow-up period, mean marginal bone loss values for the SLA and SLActive implants were 0.24 and 0.17 mm, respectively. After 81 months, mean marginal bone loss for the SLA and SLActive implants reached 0.71 and 0.53 mm, respectively. Marginal bone loss was affected by the length and type of implant and patients' smoking habit after a mean observation time of 20 months. However, none of the parameters had any significant effect on the marginal bone loss after a follow-up period of 81 months. With both SLA and SLActive implants, successful clinical results could be achieved up to 6.5 years of follow-up period.

Outcome of wide local excision in dermatofibrosarcoma protuberans and use of radiotherapy for margin-positive disease

Directory of Open Access Journals (Sweden)

Raashid Hamid

2013-01-01

Full Text Available Purpose: Wide local excision (WLE is the preferred treatment of dermatofibrosarcoma protuberans (DFSP. The aim is to achieve negtive margins. We followed the impact of radiotherapy used postoperatively for both margin-negative and margin-positive DFSP tumors. Materials and Methods: Outcome of treatment of 36 patients of DFSP treated at our hospital was assessed. Thirty patients received radiotherapy postoperatively and six patients received radiotherapy alone. The maximum dimension of the lesion was 15 cm 2 . Patients were followed up for varying periods of time for any recurrence. Results: 10-year actuarial local control rate was determined. Local control was realized in six patients who were treated with radiotherapy alone. 30 patients were treated by radiotherapy and surgery. Out of these 30 patients, there were 6 local failures (failure rate 10%. Actuarial control rate was 82%. The failures were among patients who had positive margins. Conclusion: Radiotherapy is effective, and it decreases the recurrence rate in the treatment of DFSP. It is especially helpful in margin-positive disease. This appears true for patients treated with radiotherapy alone or radiotherapy used postoperatively.

Marginal pricing of transmission services: An analysis of cost recovery

Energy Technology Data Exchange (ETDEWEB)

Perez-Arriaga, I.J.; Rubio, F.J. [Univ. Pontificia Comillas, Madrid (Spain); Puerta, J.F.; Arceluz, J.; Marin, J. [IBERDROLA, Bilbao (Spain). Unidad de Planificacion Estrategica

1995-02-01

This paper presents an in-depth analysis of network revenues computed with marginal pricing, and in particular it investigates the reasons why marginal prices fail to recover the total incurred network costs in actual power systems. The basic theoretical results are presented and the major causes of the mismatch between network costs and marginal revenues are identified and illustrated with numerical examples, some tutorial and others of realistic size. The regulatory implications of marginal network pricing in the context of competitive electricity markets are analyzed, and suggestions are provided for the meaningful allocation of the costs of the network among its users.

Marginal pricing of transmission services: An analysis of cost recovery

International Nuclear Information System (INIS)

Perez-Arriaga, I.J.; Rubio, F.J.; Puerta, J.F.; Arceluz, J.; Marin, J.

1995-01-01

This paper presents an in-depth analysis of network revenues computed with marginal pricing, and in particular it investigates the reasons why marginal prices fail to recover the total incurred network costs in actual power systems. The basic theoretical results are presented and the major causes of the mismatch between network costs and marginal revenues are identified and illustrated with numerical examples, some tutorial and others of realistic size. The regulatory implications of marginal network pricing in the context of competitive electricity markets are analyzed, and suggestions are provided for the meaningful allocation of the costs of the network among its users

Evaluation of the marginal fit of metal copings fabricated on three different marginal designs using conventional and accelerated casting techniques: an in vitro study.

Science.gov (United States)

Vaidya, Sharad; Parkash, Hari; Bhargava, Akshay; Gupta, Sharad

2014-01-01

Abundant resources and techniques have been used for complete coverage crown fabrication. Conventional investing and casting procedures for phosphate-bonded investments require a 2- to 4-h procedure before completion. Accelerated casting techniques have been used, but may not result in castings with matching marginal accuracy. The study measured the marginal gap and determined the clinical acceptability of single cast copings invested in a phosphate-bonded investment with the use of conventional and accelerated methods. One hundred and twenty cast coping samples were fabricated using conventional and accelerated methods, with three finish lines: Chamfer, shoulder and shoulder with bevel. Sixty copings were prepared with each technique. Each coping was examined with a stereomicroscope at four predetermined sites and measurements of marginal gaps were documented for each. A master chart was prepared for all the data and was analyzed using Statistical Package for the Social Sciences version. Evidence of marginal gap was then evaluated by t-test. Analysis of variance and Post-hoc analysis were used to compare two groups as well as to make comparisons between three subgroups . Measurements recorded showed no statistically significant difference between conventional and accelerated groups. Among the three marginal designs studied, shoulder with bevel showed the best marginal fit with conventional as well as accelerated casting techniques. Accelerated casting technique could be a vital alternative to the time-consuming conventional casting technique. The marginal fit between the two casting techniques showed no statistical difference.

Systems considerations in seismic margin evaluations

International Nuclear Information System (INIS)

Buttermer, D.R.

1987-01-01

Increasing knowledge in the geoscience field has led to the understanding that, although highly unlikely, it is possible for a nuclear power plant to be subjected to earthquake ground motion greater than that for which the plant was designed. While it is recognized that there are conservatisms inherent in current design practices, interest has developed in evaluating the seismic risk of operating plants. Several plant-specific seismic probabilistic risk assessments (SPRA) have been completed to address questions related to the seismic risk of a plant. The results from such SPRAs are quite informative, but such studies may entail a considerable amount of expensive analysis of large portions of the plant. As an alternative to an SPRA, it may be more practical to select an earthquake level above the design basis for which plant survivability is to be demonstrated. The principal question to be addressed in a seismic margin evaluation is: At what ground motion levels does one have a high confidence that the probability of seismically induced core damage is sufficiently low? In a seismic margin evaluation, an earthquake level is selected (based on site-specific geoscience considerations) for which a stable, long-term safe shutdown condition is to be demonstrated. This prespecified earthquake level is commonly referred to as the seismic margin earthquake (SME). The Electric Power Research Institute is currently supporting a research project to develop procedures for use by the utilities to allow them to perform nuclear plant seismic margin evaluations. This paper describes the systems-related aspects of these procedures

Radiotherapy margin design with particular consideration of high curvature CTVs

International Nuclear Information System (INIS)

Herschtal, Alan; Kron, Tomas; Fox, Chris

2009-01-01

In applying 3D conformal radiation therapy to a tumor clinical target volume (CTV), a margin is added around the CTV to account for any sources of error in the application of treatment which may result in misalignment between the CTV and the dose distribution actually delivered. The volume enclosed within the CTV plus the margin is known as the PTV, or planning target volume. The larger the errors are anticipated to be, the wider the margin will need to be to accommodate those errors. Based on the approach of van Herk et al. [''The probability of correct target dosage: Dose-population histograms for deriving treatment margins in radiotherapy,'' Int. J. Radiat. Oncol. Biol., Phys. 47(4), 1121-1135 (2000)] this paper develops the mathematical theory behind the calculation of the margin width required to ensure that the entire CTV receives sufficiently high dose with sufficiently high probability. The margin recipe developed not only considers the magnitude of the errors but also includes a term to adjust for curved CTV surfaces. In doing so, the accuracy of the margin recipe is enhanced yet remains mathematically concise enough to be readily implemented in the clinical setting. The results are particularly relevant for clinical situations in which the uncertainties in treatment are large relative to the size of the CTV.

Short-term marginal costs in French agriculture

OpenAIRE

Latruffe, Laure; LETORT, Elodie

2011-01-01

The paper investigates short-term marginal costs in French agriculture for field cropping, beef cattle, and dairy farms during the period 1995-2006. The multi-input multi-output Symmetric Generalised MacFadden cost function is used, with three variable inputs (crop-specific, animal-specific, energy costs), four outputs and three quasi-fixed inputs. Results indicate that marginal costs are on average lower for crop farms than for livestock samples. However, for crop farms, Common Agricultural ...

[Economic development and married women's employment in Taiwan: a study of female marginalization].

Science.gov (United States)

Lu, Y

1994-07-01

As in other developing countries, the industrial development in Taiwan seems to marginalize female workers. This study tries to examine the trend of women's employment status, using both macro- and micro-level data. The statistics suggest that female employment had significantly declined during the early stages of industrialization. Although rapid economic development has expanded women's job opportunities, most women are concentrated in lower-status jobs and the informal sector. Informal employment is especially prevalent among married women. In the micro-level analysis the study examines the factors that led to the marginalization of women's labor force. The empirical analysis applies a multinomial logistic model to a 1980 KAP (knowledge, attitude, and practice) survey sample of 3859 married women. The results suggest that married women's work patterns in terms of formal vs. informal employment are determined by the family organization rather than by labor market conditions. Wives from families with small businesses are more likely to be involved in informal employment. Wives also tend to work informally when they have young children. On the other hand, the effects of labor market conditions are mediated by the types of family economy. Therefore the women's informal employment in Taiwan, as a characteristic of female marginalization, is the result of the sexual division of labor in the family organization and the prevalence of the family business, rather than that of being excluded into the marginal forms of employment through the process of capitalistic production, as argued by the female marginalization theorists.

Are subduction zones invading the atlantic? Evidence from the southwest iberia margin

NARCIS (Netherlands)

Duarte, João C.; Rosas, Filipe M.; Terrinha, Pedro; Schellart, Wouter P.; Boutelier, David; Gutscher, Marc André; Ribeiro, António

Subduction initiation at passive margins plays a central role in the plate tectonics theory. However, the process by which a passive margin becomes active is not well understood. In this paper we use the southwest Iberia margin (SIM) in the Atlantic Ocean to study the process of passive margin

Amphetamine margin in sports. [Effects on performance of highly trained athletes

Energy Technology Data Exchange (ETDEWEB)

Laties, V.G.; Weiss, B.

1980-01-01

The amphetamines can enhance athletic performance. That much seems clear from the literature, some of which is reviewed here. Increases in endurance have been demonstrated in both man and rat. Smith and Beecher, 20 years ago, showed improvement of running, swimming, and weight throwing in highly trained athletes. Laboratory analogues of such performance have also been used and similar enhancement demonstrated. The amount of change induced by the amphetamines is usually small, of the order of a few percent. Nevertheless, since a fraction of a percent improvement can make the difference between fame and oblivion, the margin conferred by these drugs can be quite important.

Deregulated model and locational marginal pricing

International Nuclear Information System (INIS)

Sood, Yog Raj; Padhy, N.P.; Gupta, H.O.

2007-01-01

This paper presents a generalized optimal model that dispatches the pool in combination with privately negotiated bilateral and multilateral contracts while maximizing social benefit has been proposed. This model determines the locational marginal pricing (LMP) based on marginal cost theory. It also determines the size of non-firm transactions as well as pool demand and generations. Both firms as well as non-firm transactions are considered in this model. The proposed model has been applied to IEEE-30 bus test system. In this test system different types of transactions are added for analysis of the proposed model. (author)

Impact of Millimeter-Level Margins on Peripheral Normal Brain Sparing for Gamma Knife Radiosurgery

International Nuclear Information System (INIS)

Ma, Lijun; Sahgal, Arjun; Larson, David A.; Pinnaduwage, Dilini; Fogh, Shannon; Barani, Igor; Nakamura, Jean; McDermott, Michael; Sneed, Penny

2014-01-01

Purpose: To investigate how millimeter-level margins beyond the gross tumor volume (GTV) impact peripheral normal brain tissue sparing for Gamma Knife radiosurgery. Methods and Materials: A mathematical formula was derived to predict the peripheral isodose volume, such as the 12-Gy isodose volume, with increasing margins by millimeters. The empirical parameters of the formula were derived from a cohort of brain tumor and surgical tumor resection cavity cases (n=15) treated with the Gamma Knife Perfexion. This was done by first adding margins from 0.5 to 3.0 mm to each individual target and then creating for each expanded target a series of treatment plans of nearly identical quality as the original plan. Finally, the formula was integrated with a published logistic regression model to estimate the treatment-induced complication rate for stereotactic radiosurgery when millimeter-level margins are added. Results: Confirmatory correlation between the nominal target radius (ie, R T ) and commonly used maximum target size was found for the studied cases, except for a few outliers. The peripheral isodose volume such as the 12-Gy volume was found to increase exponentially with increasing Δ/R T , where Δ is the margin size. Such a curve fitted the data (logarithmic regression, R 2 >0.99), and the 12-Gy isodose volume was shown to increase steeply with a 0.5- to 3.0-mm margin applied to a target. For example, a 2-mm margin on average resulted in an increase of 55% ± 16% in the 12-Gy volume; this corresponded to an increase in the symptomatic necrosis rate of 6% to 25%, depending on the Δ/R T values for the target. Conclusions: Millimeter-level margins beyond the GTV significantly impact peripheral normal brain sparing and should be applied with caution. Our model provides a rapid estimate of such an effect, particularly for large and/or irregularly shaped targets

30 CFR 204.4 - What is a marginal property under this part?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What is a marginal property under this part... REVENUE MANAGEMENT ALTERNATIVES FOR MARGINAL PROPERTIES General Provisions § 204.4 What is a marginal property under this part? (a) To qualify as a marginal property eligible for royalty prepayment or...

Lateral view dissection of the prostato-urethral junction to reduce positive apical margin in laparoscopic radical prostatectomy.

Science.gov (United States)

Sasaki, Hiroshi; Miki, Jun; Kimura, Takahiro; Sanuki, Kunitaro; Miki, Kenta; Takahashi, Hiroyuki; Egawa, Shin

2009-08-01

To assess the impact of lateral view apical dissection in laparoscopic radical prostatectomy (LRP) on the reduction of positive surgical margin rates and recovery of postoperative continence. One hundred and forty-four consecutive patients underwent LRP from October 2004 to March 2008. Lateral view dissection of the prostato-urethral junction was conducted in 76 of them (Group 2). Standard dissection was used in the remaining patients (Group 1). The effect of this technical modification on the reduction of positive surgical margin rates and postoperative recovery of urinary continence was assessed in the two groups. Overall, the incidence of positive margins decreased from 23 (35.9%) in Group 1 to 16 cases (21.9%) in Group 2 (P = 0.07). Positive margin rates in pT2 decreased from 30.6% to 6.5% (P = 0.006). Apical and dorso-apical margins were reduced from 26.5% to 4.3% (P = 0.009) and from 10.2% to 0% (P Lateral view dissection of the prostato-urethral junction is an easily applicable technical modification. It provides better visualization of apical anatomy substantially contributing to the reduction of positive surgical margin rates, especially at the level of prostatic apex.

Marginal cost curves for water footprint reduction in irrigated agriculture : Guiding a cost-effective reduction of crop water consumption to a permit or benchmark level

NARCIS (Netherlands)

Chukalla, Abebe D.; Krol, Maarten S.; Hoekstra, Arjen Y.

2017-01-01

Reducing the water footprint (WF) of the process of growing irrigated crops is an indispensable element in water management, particularly in water-scarce areas. To achieve this, information on marginal cost curves (MCCs) that rank management packages according to their cost-effectiveness to reduce

Assessment of unhealthy days of urban marginal inhabitants and effective factors in Mashhad, Iran

Directory of Open Access Journals (Sweden)

Maliheh Ziaee

2016-01-01

Full Text Available Background: The concept of the quality of life (HRQOL related to health and its determinants contain aspects of quality of life that clearly affect people’s physical or mental health. One of the newest ways to assess the health and also the quality of life-related to health is the self-assessed health of the individual. The aim of the present study was assessment of unhealthy days, self-reported health status, and its influencing factors on residents of the marginalpart of Mashhad, Iran. Methods: In the current cross-sectional study, 580 citizens of the marginal regions and slum areas of Mashhad city were enrolled through cluster sampling method using governmental health care services divisions. The Persian version of the questionnaire CDC HRQOL-4 was used to measure the unhealthy days. Data was analyzed using SPSS, version 11.5, running ANOVA, chi-square, and t-tests. P-value of less than 0.05 was considered as statistically significant. Results: In the present study, 359 persons (61% were women and the mean age of participants was 32.6±11.51 years. The means of unhealthy days, physically unhealthy days, mentally unhealthy days, and days with dysfunction were found to be 7.2, 2.8, 4.1, and 1.7 days, respectively. The unhealthiest days (physical and mental were seen in unemployed people and the best to excellent health days were seen in housewives. Conclusion: Unhealthy days and days with dysfunction were reported higher in slum inhabitants, especially female, low literacy, and housewife participants. Providing the education and employment facilities for people who live in marginal city areas might decrease the unhealthy days.Keywords: Unhealthy days; Health; Urban Marginal Inhabitants; Mashhad

Systematic reviews: I. The correlation between laboratory tests on marginal quality and bond strength. II. The correlation between marginal quality and clinical outcome.

Science.gov (United States)

Heintze, Siegward D

2007-01-01

An accepted principle in restorative dentistry states that restorations should be placed with the best marginal quality possible to avoid postoperative sensitivity, marginal discoloration, and secondary caries. Different laboratory methods claim to predict the clinical performance of restorative materials, for example, tests of bond strength and microleakage and gap analysis. The purpose of this review was twofold: (1) find studies that correlated the results of bond strength tests with either microleakage or gap analysis for the same materials, and (2) find studies that correlated the results of microleakage and/or gaps with the clinical parameters for the same materials. Furthermore, influencing factors on the results of the laboratory tests were reviewed and assessed. For the first question, searches for studies were conducted in the MEDLINE database and IADR/AADR abtracts online with specific search and inclusion criteria. The outcome for each study was assessed on the basis of the statistical test applied in the study, and finally the number of studies with or without correlation was compiled. For the second question, results of the quantitative marginal analysis of Class V restorations published by the University of Zürich with the same test protocol and prospective clinical trials were searched that investigated the same materials for at least 2 years in Class V cavities. Pearson correlation coefficients were calculated for pooled data of materials and clinical outcome parameters such as retention loss, marginal discoloration, marginal integrity, and secondary caries. For the correlation of dye penetration and clinical outcome, studies on Class V restorations published by the same research institute were searched in MEDLINE that examined the same adhesive systems as the selected clinical trials. For the correlation bond strength/microleakage, 30 studies were included into the review, and for the correlation bond strength/gap analysis 18 studies. For both

The importance of familia for Latina/o college students: examining the role of familial support in intragroup marginalization.

Science.gov (United States)

Llamas, Jasmín D; Morgan Consoli, Melissa

2012-10-01

Intragroup marginalization refers to the perceived interpersonal distancing by members of the heritage culture when an individual exhibits cultural characteristics of the dominant group. This study expands understanding of the college experience of Latina/o students by examining relationships between intragroup marginalization, college adjustment, resilience, and thriving in a sample of 181 Latina/o college students, ranging from freshman to graduate students. In addition, the role of familial social support is explored to determine any possible mediating effects on the relationship between intragroup marginalization, college adjustment, resilience, and thriving. Findings revealed that intragroup marginalization predicted college adjustment, resilience, and thriving. Familial social support was found to mediate the relationship between intragroup marginalization and thriving. This research highlights the negative impact of intragroup marginalization for Latina/o students, as well as the role of familial support in thriving. The results also shed light on the Latina/o college experience as a means to improving Latina/o students' college outcomes. (PsycINFO Database Record (c) 2012 APA, all rights reserved).

The effect of proximal contour on marginal ridge fracture of Class II composite resin restorations.

NARCIS (Netherlands)

Loomans, B.A.C.; Roeters, F.J.M.; Opdam, N.J.M.; Kuijs, R.H.

2008-01-01

OBJECTIVES: To compare the marginal ridge fracture strength of Class II composite resin restorations placed with a straight or contoured matrix band using composite resins with different modulus of elasticity. METHODS: In 60 artificial first molars standardized MO-preparations were ground. Two

Assessment of bioenergy potential on marginal land in China

Energy Technology Data Exchange (ETDEWEB)

Zhuang, Dafang; Jiang, Dong; Liu, Lei; Huang, Yaohuan [Data Center for Resources and Environmental Sciences, Institute of Geographical Sciences and Natural Resources Research, Chinese Academy of Sciences, 11A Datun Road, Chaoyang District, Beijing 100101 (China)

2011-02-15

Bioenergy developed from energy plants will play a more and more important role in future energy supply. Much attention has been paid to energy plants in recent years. As China has fairly limited cultivated land resources, the bioenergy development may mainly rely on the exploitation of marginal land. This study focused on the assessment of marginal land resources and bio-fuel potential in China using newly acquired data and Geographic Information System (GIS) techniques. A multi-factor analysis method was adopted to identify marginal lands for bioenergy development in China, with data of several main types of energy plants on the eco-environmental requirements and natural habits employed. A combined planting zonation strategy was proposed, which was targeted for five species of energy plants including Helianthus tuberous L., Pistacia chinensis, Jatropha curcas L., Cassava and Vernicia fordii. The results indicated that total area of marginal land exploitable for development of energy plants on a large scale was about 43.75 million ha. If 10% of this marginal land was fully utilized for growing the energy plants, the production of bio-fuel would be 13.39 million tons. (author)

Relief for marginal wells is better than energy tax

International Nuclear Information System (INIS)

Swords, J.; Wilson, D.

1993-01-01

By increasing production costs and reducing petroleum prices, President Bill Clinton's proposed energy tax would increase marginal well abandonments and hasten the decline of the US oil and gas industry. Instead, the US needs tax law changes to help counteract the increasing number of oil and gas well abandonments in the lower 48 states. The proposed tax would create potential difficulties, while three incentives could be introduced to reduce abandonments and at the same time preserve US government tax revenues that otherwise would be lost. Eliminating the net income limitation on percentage depletion allowances on wells that would otherwise be abandoned would be a great help for marginal well operators. Extended enhanced oil recovery (EOR) credits and broader investment tax credits could also serve the dual purpose of keeping marginal wells operating longer and generating more federal tax revenues. A marginal well investment tax credit should be provided that is not just a credit for incremented investments that exceed investment in prior years. An investment tax credit based on out-of-pocket costs of production, targeted for marginal wells, would be an important incentive to invest in, and continue to maintain, these properties. (author)

In silico particle margination in blood flow

OpenAIRE

Müller, Kathrin

2015-01-01

A profound knowledge of margination, the migration of blood components to the vessel wall in blood flow, is required in order to understand the genesis of various diseases, as e.g., cardiovascular diseases or bleeding disorders. Margination of particles is a pre-condition for potential adhesion. Adhesion to the vessel wall is required for platelets, the protein von Willebrand factor (VWF), but also for drug and imaging agent carriers in order to perform their particular tasks. In the haemosta...

Multi Blending Technology (MBT): mineral processing method for increasing added value of marginal reserve

Science.gov (United States)

Agustinus, E. T. S.

2018-02-01

Indonesia's position on the path of ring of fire makes it rich in mineral resources. Nevertheless, in the past, the exploitation of Indonesian mineral resources was uncontrolled resulting in environmental degradation and marginal reserves. Exploitation of excessive mineral resources is very detrimental to the state. Reflecting on the occasion, the management and utilization of Indonesia's mineral resources need to be good in mining practice. The problem is how to utilize the mineral reserve resources effectively and efficiently. Utilization of marginal reserves requires new technologies and processing methods because the old processing methods are inadequate. This paper gives a result of Multi Blending Technology (MBT) Method. The underlying concept is not to do the extraction or refinement but processing through the formulation of raw materials by adding an additive and produce a new material called functional materials. Application of this method becomes important to be summarized into a scientific paper in a book form, so that the information can spread across multiple print media and become focused on and optimized. This book is expected to be used as a reference for stakeholder providing added value to environmentally marginal reserves in Indonesia. The conclusions are that Multi Blending Technology (MBT) Method can be used as a strategy to increase added values effectively and efficiently to marginal reserve minerals and that Multi Blending Technology (MBT) method has been applied to forsterite, Atapulgite Synthesis, Zeoceramic, GEM, MPMO, SMAC and Geomaterial.

Seaward dipping reflectors along the SW continental margin of India: Evidence for volcanic passive margin

Digital Repository Service at National Institute of Oceanography (India)

Ajay, K.K.; Chaubey, A.K.; Krishna, K.S.; Rao, D.G.; Sar, D.

Multi-channel seismic reflection profiles across the southwest continental margin of India (SWCMI) show presence of westerly dipping seismic reflectors beneath sedimentary strata along the western flank of the Laccadive Ridge-northernmost part...

Effect of At-home and In-office Bleaching on Marginal Microleakage in Composite Resin Restorations using Two Adhesive Systems.

Science.gov (United States)

Klein, Celso A; da Silva, Douglas; Reston, Eduardo G; Borghetti, Diana Lb; Zimmer, Roberto

2018-03-01

The aim of this study is to assess marginal microleakage of cervical cavities restored with composite resins and two different adhesive techniques subjected to at-home and in-office bleaching. In this randomized, blind laboratory experiment, 60 bovine teeth recently extracted were collected and divided into six groups (n = 10 each group). The teeth received cervical cavity preparations (2 mm × 3 mm × 1 mm) with enamel margins. Two different adhesive systems were used (Single Bond 2 and Clearfil SE Bond), in addition to composite resin (Z250). Restored teeth received two different bleaching gels (Opalescence PF and Opalescence Boost). Teeth were thermo-cycled and analyzed under confocal laser scanning microscopy. No significant differences were observed (p > 0.05) in microleakage scores between the two groups not subjected to bleaching nor between the four groups that received bleaching treatment (p > 0.05), regardless of the gel and adhesive system employed. However, when comparing nonbleached with bleached teeth, those not subjected to bleaching showed statistically lower marginal microleakage scores (p bleaching agents used both at-home and in-office, regardless of the adhesive system employed (total-etch or self-etch). Both at-home and in-office bleaching agents have an influence on the adhesive interface of resin restorations, producing changes and inducing marginal leakage.

Marginalization and School Nursing

Science.gov (United States)

Smith, Julia Ann

2004-01-01

The concept of marginalization was first analyzed by nursing researchers Hall, Stevens, and Meleis. Although nursing literature frequently refers to this concept when addressing "at risk" groups such as the homeless, gays and lesbians, and those infected with HIV/AIDS, the concept can also be applied to nursing. Analysis of current school nursing…

Influence of dynamic topography on landscape evolution and passive continental margin stratigraphy

Science.gov (United States)

Ding, Xuesong; Salles, Tristan; Flament, Nicolas; Rey, Patrice

2017-04-01

Quantifying the interaction between surface processes and tectonics/deep Earth processes is one important aspect of landscape evolution modelling. Both observations and results from numerical modelling indicate that dynamic topography - a surface expression of time-varying mantle convection - plays a significant role in shaping landscape through geological time. Recent research suggests that dynamic topography also has non-negligible effects on stratigraphic architecture by modifying accommodation space available for sedimentation. In addition, dynamic topography influences the sediment supply to continental margins. We use Badlands to investigate the evolution of a continental-scale landscape in response to transient dynamic uplift or subsidence, and to model the stratigraphic development on passive continental margins in response to sea-level change, thermal subsidence and dynamic topography. We consider a circularly symmetric landscape consisting of a plateau surrounded by a gently sloping continental plain and a continental margin, and a linear wave of dynamic topography. We analyze the evolution of river catchments, of longitudinal river profiles and of the χ values to evaluate the dynamic response of drainage systems to dynamic topography. We calculate the amount of cumulative erosion and deposition, and sediment flux at shoreline position, as a function of precipitation rate and erodibility coefficient. We compute the stratal stacking pattern and Wheeler diagram on vertical cross-sections at the continental margin. Our results indicate that dynamic topography 1) has a considerable influence on drainage reorganization; 2) contributes to shoreline migration and the distribution of depositional packages by modifying the accommodation space; 3) affects sediment supply to the continental margin. Transient dynamic topography contributes to the migration of drainage divides and to the migration of the mainstream in a drainage basin. The dynamic uplift

Oral antioxidant therapy for marginal dry eye.

Science.gov (United States)

Blades, K J; Patel, S; Aidoo, K E

2001-07-01

To assess the efficacy of an orally administered antioxidant dietary supplement for managing marginal dry eye. A prospective, randomised, placebo controlled trial with cross-over. Eye Clinic, Department of Vision Sciences, Glasgow Caledonian University. Forty marginal dry eye sufferers composed of 30 females and 10 males (median age 53 y; range 38-69 y). Baseline assessments were made of tear volume sufficiency (thread test), tear quality (stability), ocular surface status (conjunctival impression cytology) and dry eye symptoms (questionnaire). Each subject was administered courses of active treatment, placebo and no treatment, in random order for 1 month each and results compared to baseline. Tear stability and ocular surface status were significantly improved following active treatment (Ptreatment (P>0.05). Absolute increase in tear stability correlated with absolute change in goblet cell population density. Tear volume was not improved following any treatment period and dry eye symptom responses were subject to placebo effect. Oral antioxidants improved both tear stability and conjunctival health, although it is not yet understood whether increased ocular surface health mediates increased tear stability or vice versa. This study was supported by a PhD scholarship funded by the Department of Vision Sciences, Glasgow Caledonian University, Scotland. Antioxidant supplements and placebos were kindly donated by Vitabiotics.

Central-marginal population dynamics in species invasions

Directory of Open Access Journals (Sweden)

Qinfeng eGuo

2014-06-01

Full Text Available The species’ range limits and associated central-marginal (C-M; i.e., from species range center to margin population dynamics continue to draw increasing attention because of their importance for current emerging issues such as biotic invasions and epidemic diseases under global change. Previous studies have mainly focused on species borders and C-M process in natural settings for native species. More recently, growing efforts are devoted to examine the C-M patterns and process for invasive species partly due to their relatively short history, highly dynamic populations, and management implications. Here I examine recent findings and information gaps related to (1 the C-M population dynamics linked to species invasions, and (2 the possible effects of climate change and land use on the C-M patterns and processes. Unlike most native species that are relatively stable (some even having contracting populations or ranges, many invasive species are still spreading fast and form new distribution or abundance centers. Because of the strong nonlinearity of population demographic or vital rates (i.e. birth, death, immigration and emigration across the C-M gradients and the increased complexity of species ranges due to habitat fragmentation, multiple introductions, range-wide C-M comparisons and simulation involving multiple vital rates are needed in the future.

PORTRAIT GRAFFITI IN MARGINS OF ANTIQUE LITHUANIAN BOOKS

Directory of Open Access Journals (Sweden)

Burba, Domininkas

2006-12-01

Full Text Available This article presents and discusses fourteen drawings that portray a human and were found in manuscripts and printed books (documents that were actively used in Lithuania from 17th to 19th centuries. All the drawings were made in the margins of the documents. For the authors the drawings were not planned work but more like quips, scribbles and doodles. Therefore the terms portrait graffiti and (as a synonym portrait marginalia are used to describe the discussed portraits. According to the formal classification of marginal drawings (suggested by J. Liskeviciene two of the examined marginal portraits (no. 10 and 14 are classed as seperate and finished works with their own composition; ten marginal portraits (no. 2, 4, 5, 6, 7, 8, 9, 11, 12 and 13 represent the readers (document users sketch like drawings. Two other portraits (no. 1 and 3 are just scribbles that have nothing to do with artictic perception and are very close to book graffiti. From the artistic approcah the most sophisticated of the marginal portraits are “the hunt scene” (no. 14 and the late (first half of the 19th century “portrait of the teacher” (no. 13. In the viewpoint of documentary and social communication the discussed marginal drawings did not have a direct addressee. They were made not for public but for personal use. Paleographical, structural and content analysis of the document showed that the author of the “bearded nobleman” portrait (no. 2 could have been the elder of Merkine Antanas Kazimieras Sapiega. The political realia of Grand Duchy of Lithuania (from now GDL are reflected by the heart shaped portrait of a youngster who we can guess is portrayed weeping over the countries misfortunes and internal disagreements duringthe period of foreight military interventions in the years from 1733 to 1736. It was forbiden for scribes to daub on court files and other official GDL documents therefore the discussed graffiti could be linked to psychological stress and

Application of matrix singular value properties for evaluating gain and phase margins of multiloop systems. [stability margins for wing flutter suppression and drone lateral attitude control

Science.gov (United States)

Mukhopadhyay, V.; Newsom, J. R.

1982-01-01

A stability margin evaluation method in terms of simultaneous gain and phase changes in all loops of a multiloop system is presented. A universal gain-phase margin evaluation diagram is constructed by generalizing an existing method using matrix singular value properties. Using this diagram and computing the minimum singular value of the system return difference matrix over the operating frequency range, regions of guaranteed stability margins can be obtained. Singular values are computed for a wing flutter suppression and a drone lateral attitude control problem. The numerical results indicate that this method predicts quite conservative stability margins. In the second example if the eigenvalue magnitude is used instead of the singular value, as a measure of nearness to singularity, more realistic stability margins are obtained. However, this relaxed measure generally cannot guarantee global stability.

Rollback of an intraoceanic subduction system and termination against a continental margin

Science.gov (United States)

Campbell, S. M.; Simmons, N. A.; Moucha, R.

2017-12-01

The Southeast Indian Slab (SEIS) seismic anomaly has been suggested to represent a Tethyan intraoceanic subduction system which operated during the Jurassic until its termination at or near the margin of East Gondwana (Simmons et al., 2015). As plate reconstructions suggest the downgoing plate remained coupled to the continental margin, this long-lived system likely experienced a significant amount of slab rollback and trench migration (up to 6000 km). Using a 2D thermomechanical numerical code that includes the effects of phase transitions, we test this interpretation by modeling the long-term subduction, transition zone stagnation, and rollback of an intraoceanic subduction system in which the downgoing plate remains coupled to a continental margin. In addition, we also investigate the termination style of such a system, with a particular focus on the potential for some continental subduction beneath an overriding oceanic plate. This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344. LLNL-ABS-735738

Effect of software version and parameter settings on the marginal and internal adaptation of crowns fabricated with the CAD/CAM system

Directory of Open Access Journals (Sweden)

Ji Suk SHIM

2015-10-01

Full Text Available Objective This study investigated the marginal and internal adaptation of individual dental crowns fabricated using a CAD/CAM system (Sirona’s BlueCam, also evaluating the effect of the software version used, and the specific parameter settings in the adaptation of crowns.Material and Methods Forty digital impressions of a master model previously prepared were acquired using an intraoral scanner and divided into four groups based on the software version and on the spacer settings used. The versions 3.8 and 4.2 of the software were used, and the spacer parameter was set at either 40 μm or 80 μm. The marginal and internal fit of the crowns were measured using the replica technique, which uses a low viscosity silicone material that simulates the thickness of the cement layer. The data were analyzed using a Friedman two-way analysis of variance (ANOVA and paired t-tests with significance level set at p<0.05.Results The two-way ANOVA analysis showed the software version (p<0.05 and the spacer parameter (p<0.05 significantly affected the crown adaptation. The crowns designed with the version 4.2 of the software showed a better fit than those designed with the version 3.8, particularly in the axial wall and in the inner margin. The spacer parameter was more accurately represented in the version 4.2 of the software than in the version 3.8. In addition, the use of the version 4.2 of the software combined with the spacer parameter set at 80 μm showed the least variation. On the other hand, the outer margin was not affected by the variables.Conclusion Compared to the version 3.8 of the software, the version 4.2 can be recommended for the fabrication of well-fitting crown restorations, and for the appropriate regulation of the spacer parameter.

Marginal Bidding: An Application of the Equimarginal Principle to Bidding in TAC SCM

Science.gov (United States)

Greenwald, Amy; Naroditskiy, Victor; Odean, Tyler; Ramirez, Mauricio; Sodomka, Eric; Zimmerman, Joe; Cutler, Clark

We present a fast and effective bidding strategy for the Trading Agent Competition in Supply Chain Management (TAC SCM). In TAC SCM, manufacturers compete to procure computer parts from suppliers (the procurement problem), and then sell assembled computers to customers in reverse auctions (the bidding problem). This paper is concerned only with bidding, in which an agent must decide how many computers to sell and at what prices to sell them. We propose a greedy solution, Marginal Bidding, inspired by the Equimarginal Principle, which states that revenue is maximized among possible uses of a resource when the return on the last unit of the resource is the same across all areas of use. We show experimentally that certain variations of Marginal Bidding can compute bids faster than our ILP solution, which enables Marginal Bidders to consider future demand as well as current demand, and hence achieve greater revenues when knowledge of the future is valuable.

Small cell lymphocytic variant of marginal zone lymphoma: A distinct form of marginal zone lymphoma derived from naïve B cells as a cutaneous counterpart to the naïve marginal zone lymphoma of splenic origin.

Science.gov (United States)

Magro, Cynthia M; Olson, Luke C

2018-02-21

Primary cutaneous marginal zone lymphoma most commonly represents an indolent form of cutaneous B cell lymphoma. However, epidermotropic marginal zone lymphoma, blastic marginal zone lymphoma and B cell dominant variants without isotype switching can be associated with extracutaneous dissemination. The presumptive cell of origin is a post germinal center B cell with plasmacytic features. In the extracutaneous setting, however, a naïve B cell origin has been proposed for a subset of marginal zone lymphomas, notably splenic marginal zone lymphoma. The author encountered 11 cases of atypical lymphocytic infiltration of the skin primarily occurring in older individuals with an upper arm and head and neck localization; there was a reproducible pattern of diffuse and nodular infiltration by small monomorphic-appearing B cells. Phenotypically, the infiltrate was one predominated by B cells exhibiting CD23 and IgD positivity without immunoreactivity for CD38 and there were either no plasma cells or only a few without light chain restriction. In cases presenting with a solitary lesion complete excision and/or radiation led to successful disease remission in all cases without recurrence or metastatic disease. Of three cases with multiple initial lesions, evidence of extracutaneous disease was seen in two cases and recurrence occurred in one case. No patients have died of lymphoma. Longer term follows up and additional cases are needed to determine if this subset of marginal zone lymphoma is associated with a worse prognosis. Copyright © 2018. Published by Elsevier Inc.

Economic assessment of Operational Energy reduction options in a house using Marginal Benefit and Marginal Cost: A case in Bangi, Malaysia

International Nuclear Information System (INIS)

Wan Rahmah Mohd Zaki; Abdul Hadi Nawawi; Sabarinah Sh Ahmad

2010-01-01

Energy Efficient (EE) appliances such as Compact Fluorescent Light (CFL) bulbs and Renewable Energy (RE), namely solar Photovoltaic (PV) can help to reduce Operational Energy (OE) in a house. In addition, a house should also incorporate Passive Architecture (PA) design strategies which in the hot and humid tropical climate, mean avoiding direct heat gain, encouraging natural cross ventilation and optimising the abundant daylight. Nevertheless, reducing OE must also mean economic gain to households to encourage their participation. Common economic gauges such as Return on Investment, Payback Period, Cost Benefit Analysis, Life Cycle Assessment and Life Cycle Cost are not suitable to validate OE options in households. These economic gauges approach economic assessment as an end-result on the cost side of the product and may result for good intention to be shelved, primarily because EE equipment and RE have high capital cost compared with the alternatives. On the other hand, reducing OE in houses is actually a continual progression from the status quo and there is always a marginal gain in doing so. The challenge is to know how much is the marginal benefit against the marginal cost of investing in EE and RE. In Economics, the ratio of Marginal Cost (MC) and Marginal Benefits (MB) measure additional benefits of every additional costs of investment at a specific level of production and consumption; and Economists suggests that effective gain and loss should be compared to the status quo, i.e., Relative Position (RP). The Economics theories of MC, MB and RP are being adapted to measure the progression of reducing OE. The living/dining area in two types of houses: with and without PA design strategies are simulated to use conventional incandescent light bulbs and CFL as well as solar PV in lieu of the mains electricity supply. The power requirement for artificial lighting in every case is translated into monetary value and the ratio of MB against MC for each case shows

Observations at convergent margins concerning sediment subduction, subduction erosion, and the growth of continental crust

Science.gov (United States)

von Huene, Roland E.; Scholl, D. W.

1991-01-01

At ocean margins where two plates converge, the oceanic plate sinks or is subducted beneath an upper one topped by a layer of terrestrial crust. This crust is constructed of continental or island arc material. The subduction process either builds juvenile masses of terrestrial crust through arc volcanism or new areas of crust through the piling up of accretionary masses (prisms) of sedimentary deposits and fragments of thicker crustal bodies scraped off the subducting lower plate. At convergent margins, terrestrial material can also bypass the accretionary prism as a result of sediment subduction, and terrestrial matter can be removed from the upper plate by processes of subduction erosion. Sediment subduction occurs where sediment remains attached to the subducting oceanic plate and underthrusts the seaward position of the upper plate's resistive buttress (backstop) of consolidated sediment and rock. Sediment subduction occurs at two types of convergent margins: type 1 margins where accretionary prisms form and type 2 margins where little net accretion takes place. At type 2 margins (???19,000 km in global length), effectively all incoming sediment is subducted beneath the massif of basement or framework rocks forming the landward trench slope. At accreting or type 1 margins, sediment subduction begins at the seaward position of an active buttress of consolidated accretionary material that accumulated in front of a starting or core buttress of framework rocks. Where small-to-mediumsized prisms have formed (???16,300 km), approximately 20% of the incoming sediment is skimmed off a detachment surface or decollement and frontally accreted to the active buttress. The remaining 80% subducts beneath the buttress and may either underplate older parts of the frontal body or bypass the prism entirely and underthrust the leading edge of the margin's rock framework. At margins bordered by large prisms (???8,200 km), roughly 70% of the incoming trench floor section is

Determination of the Nonlethal Margin Inside the Visible 'Ice-Ball' During Percutaneous Cryoablation of Renal Tissue

Energy Technology Data Exchange (ETDEWEB)

Georgiades, Christos, E-mail: g_christos@hotmail.com [Johns Hopkins University, Department of Vascular and Interventional Radiology, Interventional Radiology Center (United States); Rodriguez, Ronald, E-mail: rrodrig@jhmi.edu [Johns Hopkins University, Department of Urology (United States); Azene, Ezana, E-mail: eazene1@jhmi.edu; Weiss, Clifford, E-mail: cweiss@jhmi.edu [Johns Hopkins University, Department of Vascular and Interventional Radiology, Interventional Radiology Center (United States); Chaux, Alcides, E-mail: achaux1@jhmi.edu; Gonzalez-Roibon, Nilda, E-mail: ngonzal6@jhmi.edu; Netto, George, E-mail: gnetto1@jhmi.edu [Johns Hopkins University, Department of Urologic Pathology (United States)

2013-06-15

Objective. The study was designed to determine the distance between the visible 'ice-ball' and the lethal temperature isotherm for normal renal tissue during cryoablation. Methods. The Animal Care Committee approved the study. Nine adult swine were used: three to determine the optimum tissue stain and six to test the hypotheses. They were anesthetized and the left renal artery was catheterized under fluoroscopy. Under MR guidance, the kidney was ablated and (at end of a complete ablation) the nonfrozen renal tissue (surrounding the 'ice-ball') was stained via renal artery catheter. Kidneys were explanted and sent for slide preparation and examination. From each slide, we measured the maximum, minimum, and an in-between distance from the stained to the lethal tissue boundaries (margin). We examined each slide for evidence of 'heat pump' effect. Results. A total of 126 measurements of the margin (visible 'ice-ball'-lethal margin) were made. These measurements were obtained from 29 slides prepared from the 6 test animals. Mean width was 0.75 {+-} 0.44 mm (maximum 1.15 {+-} 0.51 mm). It was found to increase adjacent to large blood vessels. No 'heat pump' effect was noted within the lethal zone. Data are limited to normal swine renal tissue. Conclusions. Considering the effects of the 'heat pump' phenomenon for normal renal tissue, the margin was measured to be 1.15 {+-} 0.51 mm. To approximate the efficacy of the 'gold standard' (partial nephrectomy, {approx}98 %), a minimum margin of 3 mm is recommended (3 Multiplication-Sign SD). Given these assumptions and extrapolating for renal cancer, which reportedly is more cryoresistant with a lethal temperature of -40 Degree-Sign C, the recommended margin is 6 mm.

Dominant and marginalized discourses in interracial couples' narratives: implications for family therapists.

Science.gov (United States)

Killian, Kyle D

2002-01-01

This study explores inter-racial couples' family histories, their experiences of their life together, and the dominant and subordinate discourses employed in negotiating racial and ethnic differences. Ten black-white couples were interviewed individually and conjointly. Dominant discourses that emerged from the couples' narratives included those of homogamy, hypersensitivity of persons of color, and the insignificance of familial and societal history. Interracial partners also simultaneously subverted these prevailing ideologies by voicing experience associated with life at the margins of the society. Dominant and subordinate dicourses used by therapists and interracial couples in the therapy room are examined to integrate marginalized "truths" crucial to effective work with interracial couples and persons of color.

Seismic safety margins research program overview

International Nuclear Information System (INIS)

Tokarz, F.J.; Smith, P.D.

1978-01-01

A multiyear seismic research program has been initiated at the Lawrence Livermore Laboratory. This program, the Seismic Safety Margins Research Program (SSMRP) is funded by the U.S. Nuclear Regulatory Commission, Office of Nuclear Regulatory Research. The program is designed to develop a probabilistic systems methodology for determining the seismic safety margins of nuclear power plants. Phase I, extending some 22 months, began in July 1978 at a funding level of approximately $4.3 million. Here we present an overview of the SSMRP. Included are discussions on the program objective, the approach to meet the program goal and objectives, end products, the probabilistic systems methodology, and planned activities for Phase I

Marginal integrity of low-shrinkage and methacrylate-based composite resins: Effect of three different hemostatic agents

Science.gov (United States)

Khoroushi, Maryam; Sahraneshin-Samani, Mahsa

2016-01-01

Background Moisture control is very important in restorative procedures in dentistry. Use of hemostatic agents helps control moisture; however, they might result in changes on enamel and dentin surfaces, affecting composite resin bond quality. The aim of this in vitro study was to evaluate the marginal microleakage of two different composite resins with the use of three different hemostatic agents. Material and Methods Standardized Class V cavities were prepared on the buccal and lingual surfaces of 48 premolars with cervical margins 1 mm apical to the cementoenamel junction (CEJ). The samples were randomly divided into 8 groups. In groups 1 to 4, an etch-and-rinse adhesive (Adper Single Bond) was applied as the bonding system, followed by exposure to different hemostatic agent: group 1: no hemostatic agent (control); group 2: ViscoStat; group 3: ViscoStat Clear; and group 4: trichloracetic acid, as hemostatic agents. The cavities were restored with Z-250 composite resin. In group 5 to 8 Silorane System Adhesive (Filtek P90 Adhesive) was applied as a bonding agent, followed by exposure to different hemostatic agents in a manner similar to that in groups 1to 4. The cavities were restored with Filtek P90, a low-shrinkage composite resin. The samples in each group were evaluated for dye penetration under a stereomicroscope at ×36 after 24 hours and a 500-round thermocycling procedure at enamel and dentin margins. Statistical analysis was carried out using Kruskal-Wallis and Mann-Whitney tests (α=0.05). Results Z-250 composite resin exhibited significantly higher dentin microleakage scores compared to Filtek P90 (P = 0.004). Trichloracetic acid increased dentin microleakage with Filtek P90 (P=0.033). Conclusions Under the limitations of this in vitro study, application of hemostatic agents did not affect microleakage of the two tested composite resins except for trichloracetic acid that increased marginal microleakage when used with Filtek P90. Key words

New evidence on the asymmetry in gasoline price: volatility versus margin?

International Nuclear Information System (INIS)

Abosedra, S.; Radchenko, S.

2006-01-01

This paper examines recent evidence on the role that gasoline margins and volatility play in the asymmetric response of gasoline prices to changes in oil prices at different stages of distribution process. In a regression model with margins, we find that margins are statistically significant in explaining asymmetry between crude oil and spot gasoline prices, spot gasoline prices and wholesale gasoline prices, and wholesale gasoline prices and retail prices. In a regression model with input volatility, we find evidence that volatility is responsible for asymmetry between wholesale gasoline prices and retail gasoline prices. When both, gasoline margins and gasoline volatility are included in the regression, we find evidence supporting margins, the search theory, volatility, the oligopolistic coordination theory and an explanation of asymmetry. (author)

Calculating the marginal costs of a district-heating utility

International Nuclear Information System (INIS)

Sjoedin, Joergen; Henning, Dag

2004-01-01

District heating plays an important role in the Swedish heat-market. At the same time, the price of district heating varies considerably among different district-heating utilities. A case study is performed here in which a Swedish utility is analysed using three different methods for calculating the marginal costs of heat supply: a manual spreadsheet method, an optimising linear-programming model, and a least-cost dispatch simulation model. Calculated marginal-costs, obtained with the three methods, turn out to be similar. The calculated marginal-costs are also compared to the actual heat tariff in use by the utility. Using prices based on marginal costs should be able to bring about an efficient resource-allocation. It is found that the fixed rate the utility uses today should be replaced by a time-of-use rate, which would give a more accurate signal for customers to change their heat consumptions. (Author)

Time-lagged response of carabid species richness and composition to past management practices and landscape context of semi-natural field margins.

Science.gov (United States)

Alignier, Audrey; Aviron, Stéphanie

2017-12-15

Field margins are key features for the maintenance of biodiversity and associated ecosystem services in agricultural landscapes. Little is known about the effects of management practices of old semi-natural field margins, and their historical dimension regarding past management practices and landscape context is rarely considered. In this paper, the relative influence of recent and past management practices and landscape context (during the last five years) were assessed on the local biodiversity (species richness and composition) of carabid assemblages of field margins in agricultural landscapes of northwestern France. The results showed that recent patterns of carabid species richness and composition were best explained by management practices and landscape context measured four or five years ago. It suggests the existence of a time lag in the response of carabid assemblages to past environmental conditions of field margins. The relative contribution of past management practices and past landscape context varied depending on the spatial scale at which landscape context was taken into account. Carabid species richness was higher in grazed or sprayed field margins probably due to increased heterogeneity in habitat conditions. Field margins surrounded by grasslands and crops harbored species associated with open habitats whilst forest species dominated field margins surrounded by woodland. Landscape effect was higher at fine spatial scale, within 50 m around field margins. The present study highlights the importance of considering time-lagged responses of biodiversity when managing environment. It also suggests that old semi-natural field margins should not be considered as undisturbed habitats but more as management units being part of farming activities in agricultural landscapes, as for arable fields. Copyright © 2017 Elsevier Ltd. All rights reserved.

Sci—Thur PM: Planning and Delivery — 04: Respiratory margin derivation and verification in partial breast irradiation

International Nuclear Information System (INIS)

Quirk, S; Conroy, L; Smith, WL

2014-01-01

Partial breast irradiation (PBI) following breast-conserving surgery is emerging as an effective means to achieve local control and reduce irradiated breast volume. Patients are planned on a static CT image; however, treatment is delivered while the patient is free-breathing. Respiratory motion can degrade plan quality by reducing target coverage and/or dose homogeneity. A variety of methods can be used to determine the required margin for respiratory motion in PBI. We derive geometric and dosimetric respiratory 1D margin. We also verify the adequacy of the typical 5 mm respiratory margin in 3D by evaluating plan quality for increasing respiratory amplitudes (2–20 mm). Ten PBI plans were used for dosimetric evaluation. A database of volunteer respiratory data, with similar characteristics to breast cancer patients, was used for this study. We derived a geometric 95%-margin of 3 mm from the population respiratory data. We derived a dosimetric 95%-margin of 2 mm by convolving 1D dose profiles with respiratory probability density functions. The 5 mm respiratory margin is possibly too large when 1D coverage is assessed and could lead to unnecessary normal tissue irradiation. Assessing margins only for coverage may be insufficient; 3D dosimetric assessment revealed degradation in dose homogeneity is the limiting factor, not target coverage. Hotspots increased even for the smallest respiratory amplitudes, while target coverage only degraded at amplitudes greater than 10 mm. The 5 mm respiratory margin is adequate for coverage, but due to plan quality degradation, respiratory management is recommended for patients with respiratory amplitudes greater than 10 mm

Containment safety margins

International Nuclear Information System (INIS)

Von Riesemann, W.A.

1980-01-01

Objective of the Containment Safety Margins program is the development and verification of methodologies which are capable of reliably predicting the ultimate load-carrying capability of light water reactor containment structures under accident and severe environments. The program was initiated in June 1980 at Sandia and this paper addresses the first phase of the program which is essentially a planning effort. Brief comments are made about the second phase, which will involve testing of containment models

The marginal value of cash, cash flow sensitivities, and bank-finance shocks in nonlisted firms

OpenAIRE

Ostergaard, Charlotte; Sasson, Amir; Sørensen, Bent E

2011-01-01

We study how nonlisted firms trade off financial, real, and distributive uses of cash. We show that firms' marginal value of cash (MVC) affects the mix of external and internal finance used to absorb fluctuations in cash flows; in particular, high-MVC firms employ substantially more external finance on the margin. Linking firms to their main bank, we find that shocks to bank finance affect firms' trade-offs and have real effects in high-MVC firms, making investment more sensitiv...

Fission product margin in burnup credit analyses

International Nuclear Information System (INIS)

Finck, P.J.; Stenberg, C.G.

1998-01-01

The US Department of Energy (DOE) is currently working toward the licensing of a methodology for using actinide-only burnup credit for the transportation of spent nuclear fuel (SNF). Important margins are built into this methodology. By using comparisons with a representative experimental database to determine bias factors, the methodology ensures that actinide concentrations and worths are estimated conservatively; furthermore, the negative net reactivity of certain actinides and all fission products (FPs) is not taken into account, thus providing additional margin. A future step of DOE's effort might aim at establishing an actinide and FP burnup credit methodology. The objective of this work is to establish the uncertainty to be applied to the total FP worth in SNF. This will serve two ends. First, it will support the current actinide-only methodology by demonstrating the margin available from FPs. Second, it will identify the major contributions to the uncertainty and help set priorities for future work

On marginally resolved objects in optical interferometry

Science.gov (United States)

Lachaume, R.

2003-03-01

With the present and soon-to-be breakthrough of optical interferometry, countless objects shall be within reach of interferometers; yet, most of them are expected to remain only marginally resolved with hectometric baselines. In this paper, we tackle the problem of deriving the properties of a marginally resolved object from its optical visibilities. We show that they depend on the moments of flux distribution of the object: centre, mean angular size, asymmetry, and curtosis. We also point out that the visibility amplitude is a second-order phenomenon, whereas the phase is a combination of a first-order term, giving the location of the photocentre, and a third-order term, more difficult to detect than the visibility amplitude, giving an asymmetry coefficient of the object. We then demonstrate that optical visibilities are not a good model constraint while the object stays marginally resolved, unless observations are carried out at different wavelengths. Finally, we show an application of this formalism to circumstellar discs.

Therapy of radiation injuries of the rat marginal periodontium

International Nuclear Information System (INIS)

Lieske, W.; Stahlberg, N.

1987-01-01

The influence of different consistencies of food and of ionizing radiations on the marginal periodontium of female Wistar rats was studied. Microorganisms play an important part in the development of inflammatory histological reactions. Chlorhexidine and metronidazole treatment, resp., revealed a favourable effect on the inflammatory alterations of the periodontium. The evaluation was based on semiquantitative identification of plaques as well as on histological investigations of the interdental col and of the subepithelial connective tissue

On Estimating Marginal Tax Rates for U.S. States

OpenAIRE

Reed, W. Robert; Rogers, Cynthia L; Skidmore, Mark

2011-01-01

This paper presents a procedure for generating state-specific time-varying estimates of marginal tax rates (MTRs). Most estimates of MTRs follow a procedure developed by Koester and Kormendi (1989) (K&K). Unfortunately, the time-invariant nature of the K&K estimates precludes their use as explanatory variables in panel data studies with fixed effects. Furthermore, the associated MTR estimates are not explicitly linked to statutory tax parameters. Our approach addresses both shortcomings. Usin...

Lithosphere structure and subsidence evolution of the conjugate S-African and Argentine margins

Science.gov (United States)

Dressel, Ingo; Scheck-Wenderoth, Magdalena; Cacace, Mauro; Götze, Hans-Jürgen; Franke, Dieter

2016-04-01

The bathymetric evolution of the South Atlantic passive continental margins is a matter of debate. Though it is commonly accepted that passive margins experience thermal subsidence as a result of lithospheric cooling as well as load induced subsidence in response to sediment deposition it is disputed if the South Atlantic passive margins were affected by additional processes affecting the subsidence history after continental breakup. We present a subsidence analysis along the SW African margin and offshore Argentina and restore paleobathymetries to assess the subsidence evolution of the margin. These results are discussed with respect to mechanisms behind margin evolution. Therefore, we use available information about the lithosphere-scale present-day structural configuration of these margins as a starting point for the subsidence analysis. A multi 1D backward modelling method is applied to separate individual subsidence components such as the thermal- as well as the load induced subsidence and to restore paleobathymetries for the conjugate margins. The comparison of the restored paleobathymetries shows that the conjugate margins evolve differently: Continuous subsidence is obtained offshore Argentina whereas the subsidence history of the SW African margin is interrupted by phases of uplift. This differing results for both margins correlate also with different structural configurations of the subcrustal mantle. In the light of these results we discuss possible implications for uplift mechanisms.

Molecular markers in the surgical margin of oral carcinomas

DEFF Research Database (Denmark)

Bilde, A.; Buchwald, C. von; Dabelsteen, E.

2009-01-01

epithelium in the surgical resection margin may explain the local recurrence rate. The purpose of this study is to investigate the presence of senescence markers, which may represent early malignant changes in the margin that in routine pathological evaluations are classified as histologically normal...

Air-sea interactions in the marginal ice zone

Directory of Open Access Journals (Sweden)

Seth Zippel

2016-03-01

Full Text Available Abstract The importance of waves in the Arctic Ocean has increased with the significant retreat of the seasonal sea-ice extent. Here, we use wind, wave, turbulence, and ice measurements to evaluate the response of the ocean surface to a given wind stress within the marginal ice zone, with a focus on the local wind input to waves and subsequent ocean surface turbulence. Observations are from the Beaufort Sea in the summer and early fall of 2014, with fractional ice cover of up to 50%. Observations showed strong damping and scattering of short waves, which, in turn, decreased the wind energy input to waves. Near-surface turbulent dissipation rates were also greatly reduced in partial ice cover. The reductions in waves and turbulence were balanced, suggesting that a wind-wave equilibrium is maintained in the marginal ice zone, though at levels much less than in open water. These results suggest that air-sea interactions are suppressed in the marginal ice zone relative to open ocean conditions at a given wind forcing, and this suppression may act as a feedback mechanism in expanding a persistent marginal ice zone throughout the Arctic.

Emergency Load Shedding Strategy Based on Sensitivity Analysis of Relay Operation Margin against Cascading Events

DEFF Research Database (Denmark)

Liu, Zhou; Chen, Zhe; Sun, Haishun Sun

2012-01-01

the runtime emergent states of related system component. Based on sensitivity analysis between the relay operation margin and power system state variables, an optimal load shedding strategy is applied to adjust the emergent states timely before the unwanted relay operation. Load dynamics is also taken...... into account to compensate load shedding amount calculation. And the multi-agent technology is applied for the whole strategy implementation. A test system is built in real time digital simulator (RTDS) and has demonstrated the effectiveness of the proposed strategy.......In order to prevent long term voltage instability and induced cascading events, a load shedding strategy based on the sensitivity of relay operation margin to load powers is discussed and proposed in this paper. The operation margin of critical impedance backup relay is defined to identify...

Dopamine reward prediction error responses reflect marginal utility.

Science.gov (United States)

Stauffer, William R; Lak, Armin; Schultz, Wolfram

2014-11-03

Optimal choices require an accurate neuronal representation of economic value. In economics, utility functions are mathematical representations of subjective value that can be constructed from choices under risk. Utility usually exhibits a nonlinear relationship to physical reward value that corresponds to risk attitudes and reflects the increasing or decreasing marginal utility obtained with each additional unit of reward. Accordingly, neuronal reward responses coding utility should robustly reflect this nonlinearity. In two monkeys, we measured utility as a function of physical reward value from meaningful choices under risk (that adhered to first- and second-order stochastic dominance). The resulting nonlinear utility functions predicted the certainty equivalents for new gambles, indicating that the functions' shapes were meaningful. The monkeys were risk seeking (convex utility function) for low reward and risk avoiding (concave utility function) with higher amounts. Critically, the dopamine prediction error responses at the time of reward itself reflected the nonlinear utility functions measured at the time of choices. In particular, the reward response magnitude depended on the first derivative of the utility function and thus reflected the marginal utility. Furthermore, dopamine responses recorded outside of the task reflected the marginal utility of unpredicted reward. Accordingly, these responses were sufficient to train reinforcement learning models to predict the behaviorally defined expected utility of gambles. These data suggest a neuronal manifestation of marginal utility in dopamine neurons and indicate a common neuronal basis for fundamental explanatory constructs in animal learning theory (prediction error) and economic decision theory (marginal utility). Copyright © 2014 The Authors. Published by Elsevier Inc. All rights reserved.

Uncertainty Margin of Void Packet Determination for Ultrasonic Test in NPP

International Nuclear Information System (INIS)

Lee, Seungchan; Sung, Jejung; Lee, Jongchan; Kim, Jonguk

2014-01-01

In this study, the uncertainty of the void packet determination is estimated and the conservatism is reviewed by comparing with realistic uncertainty of Heckle's uncertainty. The methodology of ISO GUM is fully applied to calculate uncertainty, combined uncertainty and effective degree of freedom. Here some results are achieved as below: Combined uncertainty(UT) : 4.98%, Combined uncertainty(Heckle) : 1.44%, Degree of freedom: 5 ∼ 15, Effective degree of freedom(UT): 24.11, Effective degree of freedom(Heckle): 28.54, K value of t-distribution(UT): 2.042, K value of t-distribution(Heckle): 2.04, The uncertainty of this study using UT is enough in the case of achieving conservatism when the void packet determination of the safety related system is determined. As result of this study, UT uncertainty is more conservative than the Heckle's realistic uncertainty. From these results, it is shown that UT method has the great safety margin in determining the void packet. In comparing UT uncertainty with realistic uncertainty, this study (UT) has the conservatism of more than 3.4 times. UT method is good method to determine the void packet of ECCS pipe and to achieve the safety margin. In a safety related system, a void packet determination is issued by US NRC through the Generic Letter 2008-01. In case of the safety function, ECCS, CSS, and RHR systems are affected by the void packet. The related study has been being carried out by KHNP since 2012. In this study, the void packet determination using a ultra sonic test method has been carried out in some sites. This paper shows the uncertainty of the method using the ultra sonic test. The key parameters are introduced and estimated. Specially, the measurement conservatism for NPP is introduced to show the uncertainty margin

Uncertainty Margin of Void Packet Determination for Ultrasonic Test in NPP

Energy Technology Data Exchange (ETDEWEB)

Lee, Seungchan; Sung, Jejung [Korea Hydro Nuclear Power Electricity Co., Daejeon (Korea, Republic of); Lee, Jongchan; Kim, Jonguk [FNC Technology Co., LTD., Yongin (Korea, Republic of)

2014-05-15

In this study, the uncertainty of the void packet determination is estimated and the conservatism is reviewed by comparing with realistic uncertainty of Heckle's uncertainty. The methodology of ISO GUM is fully applied to calculate uncertainty, combined uncertainty and effective degree of freedom. Here some results are achieved as below: Combined uncertainty(UT) : 4.98%, Combined uncertainty(Heckle) : 1.44%, Degree of freedom: 5 ∼ 15, Effective degree of freedom(UT): 24.11, Effective degree of freedom(Heckle): 28.54, K value of t-distribution(UT): 2.042, K value of t-distribution(Heckle): 2.04, The uncertainty of this study using UT is enough in the case of achieving conservatism when the void packet determination of the safety related system is determined. As result of this study, UT uncertainty is more conservative than the Heckle's realistic uncertainty. From these results, it is shown that UT method has the great safety margin in determining the void packet. In comparing UT uncertainty with realistic uncertainty, this study (UT) has the conservatism of more than 3.4 times. UT method is good method to determine the void packet of ECCS pipe and to achieve the safety margin. In a safety related system, a void packet determination is issued by US NRC through the Generic Letter 2008-01. In case of the safety function, ECCS, CSS, and RHR systems are affected by the void packet. The related study has been being carried out by KHNP since 2012. In this study, the void packet determination using a ultra sonic test method has been carried out in some sites. This paper shows the uncertainty of the method using the ultra sonic test. The key parameters are introduced and estimated. Specially, the measurement conservatism for NPP is introduced to show the uncertainty margin.

Interrelation between rifting, faulting, sedimentation, and mantle serpentinization during continental margin formation

Science.gov (United States)

Rupke, L.; Schmid, D. W.; Perez-Gussinye, M.; Hartz, E. H.

2013-12-01

We explore the conditions under which mantle serpentinization may take place during continental rifting with 2D thermotectonostratigraphic basin models. The basic concept follows the idea that the entire extending continental crust has to be brittle for crustal scale faulting and mantle serpentinization to occur. The new model tracks the rheological evolution of the continental crust and allows for kinetically controlled mantle serpentinization processes. The isostatic and latent heat effects of the reaction are fully coupled to the structural and thermal solutions. A systematic parameter study shows that a critical stretching factor exists for which complete crustal embrittlement and serpentinization occurs. Sedimentation shifts this critical stretching factor to higher values as both deeper burial and the low thermal conductivity of sediments lead to higher crustal temperatures. Serpentinization reactions are therefore only likely in settings with low sedimentation rates and high stretching factors. In addition, we find that the rate of sediment supply has first order controls on the rheology of the lower crust, which may control the overall margin geometry. We further test these concepts in ideas in a case study for the Norwegian margin. In particular, we evaluate whether the inner lower crustal bodies (LCB) imaged beneath the More and Voring margin could be serpentinized mantle. For this purpose we reconstruct multiple 2D transects through a 3D data set. This reconstruction of the Norwegian margin shows that serpentinization reactions are indeed possible and likely during the Jurassic rift phase. Predicted present-day thicknesses and locations of partially serpentinized mantle rocks fit well to information on LCBs from seismic and gravity data. We conclude that some of the inner LCBs beneath the Norwegian margin may, in fact, be partially serpentinized mantle.

Regrounding in Place: Paths to Native American Truths at the Margins

Science.gov (United States)

Lucas, Michael

2013-01-01

Margin acts as ground to receive the figure of the text. Margin is initially unreadable, but as suggested by gestalt studies, may be reversed, or regrounded. A humanities course, "Native American Architecture and Place," was created for a polytechnic student population, looking to place as an inroad for access to the margins of a better…

Safety margins in older adults increase with improved control of a dynamic object

Science.gov (United States)

Hasson, Christopher J.; Sternad, Dagmar

2014-01-01

Older adults face decreasing motor capabilities due to pervasive neuromuscular degradations. As a consequence, errors in movement control increase. Thus, older individuals should maintain larger safety margins than younger adults. While this has been shown for object manipulation tasks, several reports on whole-body activities, such as posture and locomotion, demonstrate age-related reductions in safety margins. This is despite increased costs for control errors, such as a fall. We posit that this paradox could be explained by the dynamic challenge presented by the body or also an external object, and that age-related reductions in safety margins are in part due to a decreased ability to control dynamics. To test this conjecture we used a virtual ball-in-cup task that had challenging dynamics, yet afforded an explicit rendering of the physics and safety margin. The hypotheses were: (1) When manipulating an object with challenging dynamics, older adults have smaller safety margins than younger adults. (2) Older adults increase their safety margins with practice. Nine young and 10 healthy older adults practiced moving the virtual ball-in-cup to a target location in exactly 2 s. The accuracy and precision of the timing error quantified skill, and the ball energy relative to an escape threshold quantified the safety margin. Compared to the young adults, older adults had increased timing errors, greater variability, and decreased safety margins. With practice, both young and older adults improved their ability to control the object with decreased timing errors and variability, and increased their safety margins. These results suggest that safety margins are related to the ability to control dynamics, and may explain why in tasks with simple dynamics older adults use adequate safety margins, but in more complex tasks, safety margins may be inadequate. Further, the results indicate that task-specific training may improve safety margins in older adults. PMID:25071566