WorldWideScience

Sample records for margin reduction study

  1. Respiratory gated beam delivery cannot facilitate margin reduction, unless combined with respiratory correlated image guidance

    International Nuclear Information System (INIS)

    Korreman, Stine S.; Juhler-Nottrup, Trine; Boyer, Arthur L.

    2008-01-01

    Purpose/objective: In radiotherapy of targets moving with respiration, beam gating is offered as a means of reducing the target motion. The purpose of this study is to evaluate the safe magnitude of margin reduction for respiratory gated beam delivery. Materials/methods: The study is based on data for 17 lung cancer patients in separate protocols at Rigshospitalet and Stanford Cancer Center. Respiratory curves for external optical markers and implanted fiducials were collected using equipment based on the RPM system (Varian Medical Systems). A total of 861 respiratory curves represented external measurements over 30 fraction treatment courses for 10 patients, and synchronous external/internal measurements in single sessions for seven patients. Variations in respiratory amplitude (simulated coaching) and external/internal phase shifts were simulated by perturbation with realistic values. Variations were described by medians and standard deviations (SDs) of position distributions of the markers. Gating windows (35% duty cycle) were retrospectively applied to the respiratory data for each session, mimicking the use of commercially available gating systems. Medians and SDs of gated data were compared to those of ungated data, to assess potential margin reductions. Results: External respiratory data collected over entire treatment courses showed SDs from 1.6 to 8.1 mm, the major part arising from baseline variations. The gated data had SDs from 1.5 to 7.7 mm, with a mean reduction of 0.3 mm (6%). Gated distributions were more skewed than ungated, and in a few cases a marginal miss of gated respiration would be found even if no margin reduction was applied. Regularization of breathing amplitude to simulate coaching did not alter these results significantly. Simulation of varying phase shifts between internal and external respiratory signals showed that the SDs of gated distributions were the same as for the ungated or smaller, but the median values were markedly shifted

  2. Optimising risk reduction: An expected utility approach for marginal risk reduction during regulatory decision making

    International Nuclear Information System (INIS)

    Li Jiawei; Pollard, Simon; Kendall, Graham; Soane, Emma; Davies, Gareth

    2009-01-01

    In practice, risk and uncertainty are essentially unavoidable in many regulation processes. Regulators frequently face a risk-benefit trade-off since zero risk is neither practicable nor affordable. Although it is accepted that cost-benefit analysis is important in many scenarios of risk management, what role it should play in a decision process is still controversial. One criticism of cost-benefit analysis is that decision makers should consider marginal benefits and costs, not present ones, in their decision making. In this paper, we investigate the problem of regulatory decision making under risk by applying expected utility theory and present a new approach of cost-benefit analysis. Directly taking into consideration the reduction of the risks, this approach achieves marginal cost-benefit analysis. By applying this approach, the optimal regulatory decision that maximizes the marginal benefit of risk reduction can be considered. This provides a transparent and reasonable criterion for stakeholders involved in the regulatory activity. An example of evaluating seismic retrofitting alternatives is provided to demonstrate the potential of the proposed approach.

  3. Marginal CO2 reduction cost in ENERGY 2000 development. A socio-economic evaluation of the marginal cost for the alternative reduction methods

    International Nuclear Information System (INIS)

    Maeng, H.

    1995-01-01

    The official Danish environmental plan involves a reduction of CO 2 within the next 30-50 years. This report describes the analysis of socio-economic cost/consequences of marginal CO 2 reduction by means of various technical solution models. Calculations by means of the special program subroutine SAMFOKO are based on energy balance in annual, monthly, daily and hourly scale. Heat and power savings as well as the development of decentralized power plants are considered in the supply model. Socio-economic consequences in form of charges and cost are discussed. (EG)

  4. Supervised linear dimensionality reduction with robust margins for object recognition

    Science.gov (United States)

    Dornaika, F.; Assoum, A.

    2013-01-01

    Linear Dimensionality Reduction (LDR) techniques have been increasingly important in computer vision and pattern recognition since they permit a relatively simple mapping of data onto a lower dimensional subspace, leading to simple and computationally efficient classification strategies. Recently, many linear discriminant methods have been developed in order to reduce the dimensionality of visual data and to enhance the discrimination between different groups or classes. Many existing linear embedding techniques relied on the use of local margins in order to get a good discrimination performance. However, dealing with outliers and within-class diversity has not been addressed by margin-based embedding method. In this paper, we explored the use of different margin-based linear embedding methods. More precisely, we propose to use the concepts of Median miss and Median hit for building robust margin-based criteria. Based on such margins, we seek the projection directions (linear embedding) such that the sum of local margins is maximized. Our proposed approach has been applied to the problem of appearance-based face recognition. Experiments performed on four public face databases show that the proposed approach can give better generalization performance than the classic Average Neighborhood Margin Maximization (ANMM). Moreover, thanks to the use of robust margins, the proposed method down-grades gracefully when label outliers contaminate the training data set. In particular, we show that the concept of Median hit was crucial in order to get robust performance in the presence of outliers.

  5. Baseline risk and marginal willingness to pay for health risk reduction.

    Science.gov (United States)

    Gerking, Shelby; Adamowicz, Wiktor; Dickie, Mark; Veronesi, Marcella

    2017-01-01

    Empirical results presented in this paper suggest that parents' marginal willingness to pay (MWTP) for a reduction in morbidity risk from heart disease is inversely related to baseline risk (i.e., the amount of risk initially faced) both for themselves and for their children. For instance, a 40% reduction from the mean of baseline risk results in an increase in MWTP by 70% or more. Thus, estimates of monetary benefits of public programs to reduce heart disease risk would be understated if the standard practice is followed of evaluating MWTP at initial risk levels and then multiplying this value by the number of cases avoided. Estimates are supported by: (1) unique quantitative information on perceptions of the risk of getting heart disease that allow baseline risk to be defined at an individual level and (2) improved econometric procedures to control for well-known difficulties associated with stated preference data.

  6. M-Isomap: Orthogonal Constrained Marginal Isomap for Nonlinear Dimensionality Reduction.

    Science.gov (United States)

    Zhang, Zhao; Chow, Tommy W S; Zhao, Mingbo

    2013-02-01

    Isomap is a well-known nonlinear dimensionality reduction (DR) method, aiming at preserving geodesic distances of all similarity pairs for delivering highly nonlinear manifolds. Isomap is efficient in visualizing synthetic data sets, but it usually delivers unsatisfactory results in benchmark cases. This paper incorporates the pairwise constraints into Isomap and proposes a marginal Isomap (M-Isomap) for manifold learning. The pairwise Cannot-Link and Must-Link constraints are used to specify the types of neighborhoods. M-Isomap computes the shortest path distances over constrained neighborhood graphs and guides the nonlinear DR through separating the interclass neighbors. As a result, large margins between both interand intraclass clusters are delivered and enhanced compactness of intracluster points is achieved at the same time. The validity of M-Isomap is examined by extensive simulations over synthetic, University of California, Irvine, and benchmark real Olivetti Research Library, YALE, and CMU Pose, Illumination, and Expression databases. The data visualization and clustering power of M-Isomap are compared with those of six related DR methods. The visualization results show that M-Isomap is able to deliver more separate clusters. Clustering evaluations also demonstrate that M-Isomap delivers comparable or even better results than some state-of-the-art DR algorithms.

  7. Marginal cost curves for water footprint reduction in irrigated agriculture: a policy and decision making guide for efficient water use in crop production

    Science.gov (United States)

    Chukalla, Abebe; Krol, Maarten; Hoekstra, Arjen

    2016-04-01

    Reducing water footprints (WF) in irrigated crop production is an essential element in water management, particularly in water-scarce areas. To achieve this, policy and decision making need to be supported with information on marginal cost curves that rank measures to reduce the WF according to their cost-effectiveness and enable the estimation of the cost associated with a certain WF reduction target, e.g. towards a certain reasonable WF benchmark. This paper aims to develop marginal cost curves (MCC) for WF reduction. The AquaCrop model is used to explore the effect of different measures on evapotranspiration and crop yield and thus WF that is used as input in the MCC. Measures relate to three dimensions of management practices: irrigation techniques (furrow, sprinkler, drip and subsurface drip); irrigation strategies (full and deficit irrigation); and mulching practices (no mulching, organic and synthetic mulching). A WF benchmark per crop is calculated as resulting from the best-available production technology. The marginal cost curve is plotted using the ratios of the marginal cost to WF reduction of the measures as ordinate, ranking with marginal costs rise with the increase of the reduction effort. For each measure, the marginal cost to reduce WF is estimated by comparing the associated WF and net present value (NPV) to the reference case (furrow irrigation, full irrigation, no mulching). The NPV for each measure is based on its capital costs, operation and maintenances costs (O&M) and revenues. A range of cases is considered, including: different crops, soil types and different environments. Key words: marginal cost curve, water footprint benchmark, soil water balance, crop growth, AquaCrop

  8. The importance of marginal cost electricity pricing to the success of greenhouse gas reduction programs

    International Nuclear Information System (INIS)

    Friedman, Lee S.

    2011-01-01

    The efficient reduction of GHG emissions requires appropriate retail pricing of off-peak electricity. However, off-peak electricity for residential consumers is priced at 331% above its marginal cost in the United States as a whole (June 2009). Even for the 1% of residences that are on some form of time-of-use (TOU) rate schedule, the off-peak rate is almost three times higher than the marginal cost. A barrier to marginal-cost based TOU rates is that less than 9% of U.S. households have the 'smart' meters in place that can measure and record the time of consumption. Policies should be put in place to achieve full deployment. Another important barrier is consumer concern about TOU rate design. Two TOU rate designs (baseline and two-part tariff) are described that utilize marginal-cost based rates, ensure appropriate cost recovery, and minimize bill changes from current rate structures. A final barrier is to get residences on to these rates. Should a marginal-cost based TOU rate design remain an alternative for which residences could 'opt-in,' or become the default choice, or become mandatory? Time-invariant rates are a historical anachronism that subsidize very costly peak-period consumption and penalize off-peak usage to our environmental detriment. They should be phased out. - Highlights: → Off-peak electricity for residences is priced at 331% above marginal cost in the US. → This inefficiently deters vehicle electrification that could reduce GHG emissions. → 9% of U.S. households have the 'smart' meters necessary for time-of-use rates. → Time-invariant rates cause substantial environmental harm and should be phased out.

  9. Methane Migration and Its Influence on Sulfate Reduction in the Good Weather Ridge Region, South China Sea Continental Margin Sediments

    Directory of Open Access Journals (Sweden)

    Saulwood Lin

    2006-01-01

    Full Text Available Bacteria sulfate reduction is a major pathway for organic carbon oxidation in marine sediments. Upward diffusion of methane from gas hydrate deep in the sedimentary strata might be another important source of carbon for sulfate reducing bacteria and subsequently induce higher rates of sulfate reduction in sediments. Since abundant gas may migrate upward to the surface as a result of tectonic activity occurring in the accretionary wedge, this study investigates the effect of methane migration on the sulfate reduction process in continental margin sediments offshore southwestern Taiwan. Piston and gravity core samples were taken in order to evaluate vertical and spatial variations of sulfate and methane. Pore water sulfate, sulfide, methane, sediment pyrite, and organic carbon were extracted and analyzed.

  10. Respiratory gated beam delivery cannot facilitate margin reduction, unless combined with respiratory correlated image guidance

    DEFF Research Database (Denmark)

    Korreman, S.S.; Boyer, A.L.; Juhler-Nøttrup, Trine

    2008-01-01

    PURPOSE/OBJECTIVE: In radiotherapy of targets moving with respiration, beam gating is offered as a means of reducing the target motion. The purpose of this study is to evaluate the safe magnitude of margin reduction for respiratory gated beam delivery. MATERIALS/METHODS: The study is based on data...... for 17 lung cancer patients in separate protocols at Rigshospitalet and Stanford Cancer Center. Respiratory curves for external optical markers and implanted fiducials were collected using equipment based on the RPM system (Varian Medical Systems). A total of 861 respiratory curves represented external...... measurements over 30 fraction treatment courses for 10 patients, and synchronous external/internal measurements in single sessions for seven patients. Variations in respiratory amplitude (simulated coaching) and external/internal phase shifts were simulated by perturbation with realistic values. Variations...

  11. SU-F-J-17: Patient Localization Using MRI-Guided Soft Tissue for Head-And-Neck Radiotherapy: Indication for Margin Reduction and Its Feasibility

    International Nuclear Information System (INIS)

    Qi, X; Yang, Y; Jack, N; Santhanam, A; Yang, L; Chen, A; Low, D

    2016-01-01

    Purpose: On-board MRI provides superior soft-tissue contrast, allowing patient alignment using tumor or nearby critical structures. This study aims to study H&N MRI-guided IGRT to analyze inter-fraction patient setup variations using soft-tissue targets and design appropriate CTV-to-PTV margin and clinical implication. Methods: 282 MR images for 10 H&N IMRT patients treated on a ViewRay system were retrospectively analyzed. Patients were immobilized using a thermoplastic mask on a customized headrest fitted in a radiofrequency coil and positioned to soft-tissue targets. The inter-fraction patient displacements were recorded to compute the PTV margins using the recipe: 2.5∑+0.7σ. New IMRT plans optimized on the revised PTVs were generated to evaluate the delivered dose distributions. An in-house dose deformation registration tool was used to assess the resulting dosimetric consequences when margin adaption is performed based on weekly MR images. The cumulative doses were compared to the reduced margin plans for targets and critical structures. Results: The inter-fraction displacements (and standard deviations), ∑ and σ were tabulated for MRI and compared to kVCBCT. The computed CTV-to-PTV margin was 3.5mm for soft-tissue based registration. There were minimal differences between the planned and delivered doses when comparing clinical and the PTV reduced margin plans: the paired t-tests yielded p=0.38 and 0.66 between the planned and delivered doses for the adapted margin plans for the maximum cord and mean parotid dose, respectively. Target V95 received comparable doses as planned for the reduced margin plans. Conclusion: The 0.35T MRI offers acceptable soft-tissue contrast and good spatial resolution for patient alignment and target visualization. Better tumor conspicuity from MRI allows soft-tissue based alignments with potentially improved accuracy, suggesting a benefit of margin reduction for H&N radiotherapy. The reduced margin plans (i.e., 2 mm) resulted

  12. Harm reduction services as a point-of-entry to and source of end-of-life care and support for homeless and marginally housed persons who use alcohol and/or illicit drugs: a qualitative analysis.

    Science.gov (United States)

    McNeil, Ryan; Guirguis-Younger, Manal; Dilley, Laura B; Aubry, Tim D; Turnbull, Jeffrey; Hwang, Stephen W

    2012-05-17

    Homeless and marginally housed persons who use alcohol and/or illicit drugs often have end-of-life care needs that go unmet due to barriers that they face to accessing end-of-life care services. Many homeless and marginally housed persons who use these substances must therefore rely upon alternate sources of end-of-life care and support. This article explores the role of harm reduction services in end-of-life care services delivery to homeless and marginally housed persons who use alcohol and/or illicit drugs. A qualitative case study design was used to explore end-of-life care services delivery to homeless and marginally housed persons in six Canadian cities. A key objective was to explore the role of harm reduction services. 54 health and social services professionals participated in semi-structured qualitative interviews. All participants reported that they provided care and support to this population at end-of-life. Harm reduction services (e.g., syringe exchange programs, managed alcohol programs, etc.) were identified as a critical point-of-entry to and source of end-of-life care and support for homeless and marginally housed persons who use alcohol and/or illicit drugs. Where possible, harm reduction services facilitated referrals to end-of-life care services for this population. Harm reduction services also provided end-of-life care and support when members of this population were unable or unwilling to access end-of-life care services, thereby improving quality-of-life and increasing self-determination regarding place-of-death. While partnerships between harm reduction programs and end-of-life care services are identified as one way to improve access, it is noted that more comprehensive harm reduction services might be needed in end-of-life care settings if they are to engage this underserved population.

  13. Dental Implant Surrounding Marginal Bone Level Evaluation: Platform Switching versus Platform Matching—One-Year Retrospective Study

    Directory of Open Access Journals (Sweden)

    Eisner Salamanca

    2017-01-01

    Full Text Available The benefits and feasibility of platform switching have been discussed in several studies, reporting lesser crestal bone loss in platform-switched implants than in platform-matched implants. Objective. The aim of the present study was to observe the changes in vertical and horizontal marginal bone levels in platform-switched and platform-matched dental implants. Materials and Methods. 51 patients received 60 dental implants in the present study over a 1-year period. Measurement was performed between the implant shoulder and the most apical and horizontal marginal defect by periapical radiographs to examine the changes of peri-implant alveolar bone before and 12 months after prosthodontic restoration delivery. Results. These marginal bone measurements showed a bone gain of 0.23±0.58 mm in the vertical gap and 0.22±0.53 mm in the horizontal gap of platform matching, while in platform switching a bone gain of 0.93±1 mm (P<0.05 in the vertical gap and 0.50±0.56 mm in the horizontal gap was found. The average vertical gap reduction from the baseline until 12 months was 0.92±1.11 mm in platform switching and 0.29±0.85 mm in platform matching (P<0.05. Conclusions. Within the limitations of the present study, platform switching seemed to be more effective for a better peri-implant alveolar bone vertical and horizontal gap reduction at 1 year.

  14. Contrast of lithospheric dynamics across the southern and eastern margins of the Tibetan Plateau: a numerical study

    Science.gov (United States)

    Sun, Yujun; Fan, Taoyuan; Wu, Zhonghai

    2018-05-01

    Both of the southern and eastern margins of the Tibetan Plateau are bounded by the cratonic blocks (Indian plate and Sichuan basin). However, there are many differences in tectonic deformation, lithospheric structure and surface heat flow between these two margins. What dynamics cause these differences? With the constraints of the lithospheric structure and surface heat flow across the southern and eastern margins of Tibetan Plateau, we constructed 2-D thermal-mechanical finite-element models to investigate the dynamics across these two margins. The results show that the delamination of mantle lithosphere beneath the Lhasa terrane in Oligocene and the rheological contrast between the Indian and Tibetan crust are the two main factors that control the subduction of the Indian plate. The dynamics across the eastern margin of the Tibetan Plateau are different from the southern margin. During the lateral expansion of the Tibetan Plateau, pure shear thickening is the main deformation characteristic for the Songpan-Ganzi lithosphere. This thickening results in the reduction of geothermal gradient and surface heat flow. From this study, it can be seen that the delamination of the mantle lithosphere and the rheological contrast between the Tibetan Plateau and its bounding blocks are the two main factors that control the lithospheric deformation and surface heat flow.

  15. Individualized determination of lower margin in pelvic radiation field after low anterior resection for rectal cancer resulted in equivalent local control and radiation volume reduction compared with traditional method

    International Nuclear Information System (INIS)

    Park, Suk Won; Ahn, Yong Chan; Huh, Seung Jae; Chun, Ho Kyung; Kang, Won Ki; Kim, Dae Yong; Lim, Do Hoon; Noh, Young Ju; Lee, Jung Eun

    2000-01-01

    When determining the lower margin of post-operative pelvic radiation therapy field according to the traditional method (recommended by Gunderson), the organs located in the low pelvic cavity and the perineum are vulnerable to unnecessary radiation. This study evaluated the effect of individualized determination of the lower margin at 2 cm to 3 cm below the anastomotic site on the failure patterns. Authors included 88 patients with modified Astler-Coller (MAC) stages from B2 through C3, who received low anterior resection and post-operative pelvic radiation therapy from Sept. 1994 to May 1998 at Samsung Medical Center, Sungkyunkwan University. The numbers of male and female patients were 44 and 44, and the median age was 57 years (range: 32-81 years). Three field technique (posterior-anterior and bilateral portals) by 6, 10, 15 MY X-rays was used to deliver 4,500 cGy to the whole pelvis followed by 600 cGy's small field boost to the tumor bed over 5.5 weeks. Sixteen patients received radiation therapy by traditional field margin determination, and the lower margin was set either at the low margin of the obturator foramen or at 2 cm to 3 cm below the anastomotic site, whichever is lower. In 72 patients, the lower margin was set at 2 cm to 3 cm below the anastomotic site, irrespectively of the obturator foramen, by which the reduction of radiation volume was possible in 55 patients (76%). Authors evaluated and compared survival, local control, and disease-free survival rates of these two groups. The median follow-up period was 27 months (range: 7-58 months). MAC stages were B2 in 32 (36%) , B3 in 2 (2%), C1 in 2 (2%), C2 in 50 (57%), and C3 in 2 (2%) patients, respectively. The entire patients' overall survival rates at 2 and 4 years were 94% and 68%, respectively, and disease-free survival rates at 2 and 4 years were 86% and 58%, respectively. The first failure sites were local only in 4, distant only in 14, and combined local and distant in 1 patient, respectively

  16. The marginal costs of greenhouse gas emissions

    International Nuclear Information System (INIS)

    Tol, R.S.J.

    1999-01-01

    Estimates of the marginal costs of greenhouse gas emissions are on important input to the decision how much society would want to spend on greenhouse gas emission reduction. Marginal cost estimates in the literature range between $5 and $25 per ton of carbon. Using similar assumptions, the FUND model finds marginal costs of $9--23/tC, depending on the discount rate. If the aggregation of impacts over countries accounts for inequalities in income distribution or for risk aversion, marginal costs would rise by about a factor of 3. Marginal costs per region are an order of magnitude smaller than global marginal costs. The ratios between the marginal costs of CO 2 and those of CH 4 and N 2 O are roughly equal to the global warming potentials of these gases. The uncertainty about the marginal costs is large and right-skewed. The expected value of the marginal costs lies about 35% above the best guess, the 95-percentile about 250%

  17. Marginal abatement cost curves for policy recommendation – A method for energy system analysis

    International Nuclear Information System (INIS)

    Tomaschek, Jan

    2015-01-01

    The transport sector is seen as one of the key factors for driving future energy consumption and greenhouse gas (GHG) emissions. In order to rank possible measures marginal abatement cost curves have become a tool to graphically represent the relationship between abatement costs and emission reduction. This paper demonstrates how to derive marginal abatement cost curves for well-to-wheel GHG emissions of the transport sector considering the full energy provision chain and the interlinkages and interdependencies within the energy system. Presented marginal abatement cost curves visualize substitution effects between measures for different marginal mitigation costs. The analysis makes use of an application of the energy system model generator TIMES for South Africa (TIMES-GEECO). For the example of Gauteng province, this study exemplary shows that the transport sector is not the first sector to address for cost-efficient reduction of GHG emissions. However, the analysis also demonstrates that several options are available to mitigate transport related GHG emissions at comparable low marginal abatement costs. This methodology can be transferred to other economic sectors as well as to other regions in the world to derive cost-efficient GHG reduction strategies

  18. Head and Neck Margin Reduction With Adaptive Radiation Therapy: Robustness of Treatment Plans Against Anatomy Changes

    International Nuclear Information System (INIS)

    Kranen, Simon van; Hamming-Vrieze, Olga; Wolf, Annelisa; Damen, Eugène; Herk, Marcel van; Sonke, Jan-Jakob

    2016-01-01

    Purpose: We set out to investigate loss of target coverage from anatomy changes in head and neck cancer patients as a function of applied safety margins and to verify a cone beam computed tomography (CBCT)–based adaptive strategy with an average patient anatomy to overcome possible target underdosage. Methods and Materials: For 19 oropharyngeal cancer patients, volumetric modulated arc therapy treatment plans (2 arcs; simultaneous integrated boost, 70 and 54.25 Gy; 35 fractions) were automatically optimized with uniform clinical target volume (CTV)–to–planning target volume margins of 5, 3, and 0 mm. We applied b-spline CBCT–to–computed tomography (CT) deformable registration to allow recalculation of the dose on modified CT scans (planning CT deformed to daily CBCT following online positioning) and dose accumulation in the planning CT scan. Patients with deviations in primary or elective CTV coverage >2 Gy were identified as candidates for adaptive replanning. For these patients, a single adaptive intervention was simulated with an average anatomy from the first 10 fractions. Results: Margin reduction from 5 mm to 3 mm to 0 mm generally led to an organ-at-risk (OAR) mean dose (D_m_e_a_n) sparing of approximately 1 Gy/mm. CTV shrinkage was mainly seen in the elective volumes (up to 10%), likely related to weight loss. Despite online repositioning, substantial systematic errors were present (>3 mm) in lymph node CTV, the parotid glands, and the larynx. Nevertheless, the average increase in OAR dose was small: maximum of 1.2 Gy (parotid glands, D_m_e_a_n) for all applied margins. Loss of CTV coverage >2 Gy was found in 1, 3, and 7 of 73 CTVs, respectively. Adaptive intervention in 0-mm plans substantially improved coverage: in 5 of 7 CTVs (in 6 patients) to 2 Gy in 0-mm plans may be identified early in treatment using dose accumulation. A single intervention with an average anatomy derived from CBCT effectively mitigates discrepancies.

  19. Acute morbidity reduction using 3DCRT for prostate carcinoma; a randomised phase III study

    International Nuclear Information System (INIS)

    Koper, P.; Putten, W. van; Stroom, J.; Korevaar, G.; Heijmen, B.; Wijnmaalen, A.; Jansen, P.; Hanssens, P.; Griep, C.; Krol, A.; Samson, M.; Levendag, P.

    1997-01-01

    Purpose: A randomised phase III toxicity study (conventional vs conformal radiotherapy) was performed for prostatic carcinoma to study the effects on the (acute) morbidity of intestinal/rectosigmoid and bladder. The observed toxicity was compared with Dose Volume Histograms to reveal possible volume (reduction) effects. Methods: In the phase III study 266 T1-4 N0M0 prostate cancer patients were entered. Patients were randomised for conventional and conformal radiotherapy (total dose 66 Gy, minimum PTV dose 95% ICRU and a CTV-PTV margin of 10 mm in both study arms). The GTV was limited to the prostate only in T1 tumors. In all other patients the GTV was defined to be prostate and seminal vesicles for the complete treatment course. The CTV-PTV margin (10mm) was created by a automated program to ensure the minimum prescribed margin. The rectosigmoid was defined to be the rectum including the sigmoid within the Treatment Volume (ICRU). Acute toxicity was evaluated using the EORTC/RTOG morbidity score and weekly quality of life questionnaires. The radiation technique comparison was done by Dose volume Histogram analysis using the Area Under The Curve (AUC) for different dose levels. In this preliminary DVH analysis we present the data for the first 100 patients. Results: Patient and tumor characteristics were evenly distributed between both study groups. The maximum toxicity is reached at 75% of the tumordose (TD) (rectal grade I 59% grade II 26%, bladder grade I 48%, grade II 16% and grade III 1% [catheter for urinary retention]). Comparing both study arms there seems to be a reduction in intestinal morbidity (grade II and higher resp. 32% vs 19% p=0.02). Further analysis revealed a marked reduction in medication for anal symptoms; this accounts for a large part of the significant difference in intestinal toxicity (grade II conventional vs conformal rectosigmoid 18% vs 14% and anal 16% vs 8%). For bladder morbidity no difference for mobidity higher than grade I is

  20. Margins for treatment planning of proton therapy

    International Nuclear Information System (INIS)

    Thomas, Simon J

    2006-01-01

    For protons and other charged particles, the effect of set-up errors on the position of isodoses is considerably less in the direction of the incident beam than it is laterally. Therefore, the margins required between the clinical target volume (CTV) and planning target volume (PTV) can be less in the direction of the incident beam than laterally. Margins have been calculated for a typical head plan and a typical prostate plan, for a single field, a parallel opposed and a four-field arrangement of protons, and compared with margins calculated for photons, assuming identical geometrical uncertainties for each modality. In the head plan, where internal motion was assumed negligible, the CTV-PTV margin reduced from approximately 10 mm to 3 mm in the axial direction for the single field and parallel opposed plans. For a prostate plan, where internal motion cannot be ignored, the corresponding reduction in margin was from 11 mm to 7 mm. The planning organ at risk (PRV) margin in the axial direction reduced from 6 mm to 2 mm for the head plan, and from 7 mm to 4 mm for the prostate plan. No reduction was seen on the other axes, or for any axis of the four-field plans. Owing to the shape of proton dose distributions, there are many clinical cases in which good dose distributions can be obtained with one or two fields. When this is done, it is possible to use smaller PTV and PRV margins. This has the potential to convert untreatable cases, in which the PTV and PRV overlap, into cases with a gap between PTV and PRV of adequate size for treatment planning

  1. Passive target tracking using marginalized particle filter

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A marginalized particle filtering(MPF)approach is proposed for target tracking under the background of passive measurement.Essentially,the MPF is a combination of particle filtering technique and Kalman filter.By making full use of marginalization,the distributions of the tractable linear part of the total state variables are updated analytically using Kalman filter,and only the lower-dimensional nonlinear state variable needs to be dealt with using particle filter.Simulation studies are performed on an illustrative example,and the results show that the MPF method leads to a significant reduction of the tracking errors when compared with the direct particle implementation.Real data test results also validate the effectiveness of the presented method.

  2. Marginal and happy? The need for uniqueness predicts the adjustment of marginal immigrants.

    Science.gov (United States)

    Debrosse, Régine; de la Sablonnière, Roxane; Rossignac-Milon, Maya

    2015-12-01

    Marginalization is often presented as the strategy associated with the worst adjustment for immigrants. This study identifies a critical variable that buffers marginal immigrants from the negative effects of marginalization on adjustment: The need for uniqueness. In three studies, we surveyed immigrants recruited on university campuses (n = 119, n = 116) and in the field (n = 61). Among marginal immigrants, a higher need for uniqueness predicted higher self-esteem (Study 1), affect (Study 2), and life satisfaction (Study 3), and marginally higher happiness (Study 2) and self-esteem (Study 3). No relationship between the need for uniqueness and adjustment was found among non-marginal immigrants. The adaptive value of the need for uniqueness for marginal immigrants is discussed. © 2015 The British Psychological Society.

  3. Examining Margin Reduction and Its Impact on Dose Distribution for Prostate Cancer Patients Undergoing Daily Cone-Beam Computed Tomography

    International Nuclear Information System (INIS)

    Hammoud, Rabih; Patel, Samir H.; Pradhan, Deepak; Kim, Jinkoo; Guan, Harrison; Li Shidong; Movsas, Benjamin

    2008-01-01

    Purpose: To examine the dosimetric impact of margin reduction and quantify residual error after three-dimensional (3D) image registration using daily cone-beam computed tomography (CBCT) for prostate cancer patients. Methods and Materials: One hundred forty CBCTs from 5 prostate cancer patients were examined. Two intensity-modulated radiotherapy plans were generated on CT simulation on the basis of two planning target volume (PTV) margins: 10 mm all around the prostate and seminal vesicles except 6 mm posteriorly (10/6) and 5 mm all around except 3 mm posteriorly (5/3). Daily CBCT using the Varian On-Board Imaging System was acquired. The 10/6 and 5/3 simulation plans were overlaid onto each CBCT, and each CBCT plan was calculated. To examine residual error, PlanCT/CBCT intensity-based 3D image registration was performed for prostate localization using center of mass and maximal border displacement. Results: Prostate coverage was within 2% between the 10/6 and 5/3 plans. Seminal vesicle coverage was reduced with the 5/3 plan compared with the 10/6 plan, with coverage difference within 7%. The 5/3 plan allowed 30-50% sparing of bladder and rectal high-dose regions. For residual error quantification, center of mass data show that 99%, 93%, and 96% of observations fall within 3 mm in the left-right, anterior-posterior, and superior-inferior directions, respectively. Maximal border displacement observations range from 79% to 99%, within 5 mm for all directions. Conclusion: Cone-beam CT dosimetrically validated a 10/6 margin when soft-tissue localization is not used. Intensity-based 3D image registration has the potential to improve target localization and to provide guidelines for margin definition

  4. Biological impact of geometric uncertainties: what margin is needed for intra-hepatic tumors?

    International Nuclear Information System (INIS)

    Kuo, Hsiang-Chi; Liu, Wen-Shan; Wu, Andrew; Mah, Dennis; Chuang, Keh-Shih; Hong, Linda; Yaparpalvi, Ravi; Guha, Chandan; Kalnicki, Shalom

    2010-01-01

    To evaluate and compare the biological impact on different proposed margin recipes for the same geometric uncertainties for intra-hepatic tumors with different tumor cell types or clinical stages. Three different margin recipes based on tumor motion were applied to sixteen IMRT plans with a total of twenty two intra-hepatic tumors. One recipe used the full amplitude of motion measured from patients to generate margins. A second used 70% of the full amplitude of motion, while the third had no margin for motion. The biological effects of geometric uncertainty in these three situations were evaluated with Equivalent Uniform Doses (EUD) for various survival fractions at 2 Gy (SF 2 ). There was no significant difference in the biological impact between the full motion margin and the 70% motion margin. Also, there was no significant difference between different tumor cell types. When the margin for motion was eliminated, the difference of the biological impact was significant among different cell types due to geometric uncertainties. Elimination of the motion margin requires dose escalation to compensate for the biological dose reduction due to the geometric misses during treatment. Both patient-based margins of full motion and of 70% motion are sufficient to prevent serious dosimetric error. Clinical implementation of margin reduction should consider the tumor sensitivity to radiation

  5. Marginal adaptation of CAD-CAM onlays: Influence of preparation design and impression technique.

    Science.gov (United States)

    Lima, Fernanda Ferruzzi; Neto, Constantino Fernandes; Rubo, José H; Santos, Gildo Coelho; Moraes Coelho Santos, Maria Jacinta

    2018-03-15

    Factors that may affect the marginal adaptation of computer-aided design and computer-aided manufacturing (CAD-CAM) restorations include preparation design, impression technique, and CAD-CAM system. The influence of impression technique and preparation design on CAD-CAM partial coverage restorations has not been fully addressed. The purpose of this in vitro study was to investigate the influence of direct and indirect digital impression techniques and 2 preparation designs on the marginal adaptation of CAD-CAM onlays. Two mesio-occlusal buccal onlay preparations with reduction of the mesiobuccal cusp were made: conventional preparation (CP) with a 1.2-mm modified shoulder margin and modified preparation (MP) flat cuspal reduction without shoulder. Virtual models were generated from each preparation by using a digital scanner (BlueCam; Dentsply Sirona) from the plastic teeth (direct digital impression) or from the stone dies (indirect digital impression). Onlays were designed using a CAD-CAM system (CEREC 4.0; Dentsply Sirona), and nanoceramic resin blocks (Lava Ultimate Restorative; 3M ESPE) were milled using the CEREC MCX milling machine. Marginal discrepancy was evaluated using an optical stereomicroscope at ×25 magnification in 18 locations distributed along the margins of the preparation. The data were analyzed by using 3-way ANOVA followed by the Tukey HSD test (α=.05). CP presented a statistically significant reduced average marginal adaptation (59 ±50 μm) than did MP (69 ±58 μm) (Pmarginal discrepancy in the mesial and buccal locations of MP when compared with CP. Regarding impression techniques, the buccal location presented the smallest average marginal discrepancy in restorations fabricated with indirect impression when compared with direct impression (42 ±33 μm and 60 ±39 μm) (Pmargin presented improved marginal adaptation compared with modified preparation with flat cuspal reduction. Direct and indirect digital impression techniques produced

  6. Marketing margins and agricultural technology in Mozambique

    DEFF Research Database (Denmark)

    Arndt, Channing; Jensen, Henning Tarp; Robinson, Sherman

    2000-01-01

    of improved agricultural technology and lower marketing margins yield welfare gains across the economy. In addition, a combined scenario reveals significant synergy effects, as gains exceed the sum of gains from the individual scenarios. Relative welfare improvements are higher for poor rural households......Improvements in agricultural productivity and reductions in marketing costs in Mozambique are analysed using a computable general equilibrium (CGE) model. The model incorporates detailed marketing margins and separates household demand for marketed and home-produced goods. Individual simulations...

  7. Marginal Abatement Cost of CO2 in China Based on Directional Distance Function: An Industry Perspective

    Directory of Open Access Journals (Sweden)

    Bowen Xiao

    2017-01-01

    Full Text Available Industrial sectors account for around 70% of the total energy-related CO2 emissions in China. It is of great importance to measure the potential for CO2 emissions reduction and calculate the carbon price in industrial sectors covered in the Emissions Trading Scheme and carbon tax. This paper employs the directional distance function to calculate the marginal abatement costs of CO2 emissions during 2005–2011 and makes a comparative analysis between our study and the relevant literature. Our empirical results show that the marginal abatement costs vary greatly from industry to industry: high marginal abatement costs occur in industries with low carbon intensity, and vice versa. In the application of the marginal abatement cost, the abatement distribution scheme with minimum cost is established under different abatement targets. The conclusions of abatement distribution scheme indicate that those heavy industries with low MACs and high carbon intensity should take more responsibility for emissions reduction and vice versa. Finally, the policy implications for marginal abatement cost are provided.

  8. Determinants of the net interest margins in BH banks

    Directory of Open Access Journals (Sweden)

    Plakalović Novo

    2015-01-01

    Full Text Available In this paper, the subject of analysis is influence of certain macroeconomic and microeconomic variables on bank net interest margins in Bosnia and Herzegovina (BH for the period from 2008 to 2013 through a multiple linear regression models. The level and dynamics of NIM indicate the efficiency of financial intermediation. The observed period is characterized by the reduction in net interest margins of banks over the previous decade, which was characterized by high GDP growth, bank loans and high-interest rates and high profitability. Therefore, this study examines the factors that affect the level of net interest margins in the domestic banking industry. The main objective of this paper is to determine whether there is interdependence in the movement between the independent and dependent variables through a multiple linear regression. The net interest margin will be observed as a dependent variable, and liquidity risk, operating costs, credit risk, the index of market concentration, funding risk, the growth rate of gross domestic product and consumer price index will be used as independent variables.

  9. Marginal Bone Loss after Ten Years in an Adult Danish Population: A Radiographic Study.

    Science.gov (United States)

    Bahrami, Golnosh; Vaeth, Michael; Wenzel, Ann; Isidor, Flemming

    To evaluate marginal bone loss over a 10-year period in individuals and in tooth groups in relation to age and level of marginal bone. In 1997, 616 randomly selected individuals (mean age: 42 years, range: 21-63 years) underwent a full-mouth radiographic survey. In 2008, the survey was repeated in 362 of the same individuals (182 women and 180 men). The marginal bone level of each tooth was measured in mm from the cementoenamel junction to the marginal bone. These measurements were used to calculate marginal bone loss during the 10-year period for individuals and tooth groups in relation to age and to baseline marginal bone level, calculated as the average between measurements in 1997 and 2008 to circumvent regression towards the mean. The average annual marginal bone loss was 0.09 mm (SD ± 0.04 mm) during the 10-year study period. The association between marginal bone loss and baseline marginal bone level was more pronounced in the youngest age group, compared to the other age groups. Molars displayed the most severe bone loss during the study period. Marginal bone loss over a 10-year period is associated with age and baseline marginal bone level. Younger individuals with a reduced marginal bone level were at higher risk for further bone loss. Molars lose marginal bone more rapidly than other tooth groups.

  10. Comparative evaluation of marginal leakage of provisional crowns cemented with different temporary luting cements: In vitro study.

    Science.gov (United States)

    Arora, Sheen Juneja; Arora, Aman; Upadhyaya, Viram; Jain, Shilpi

    2016-01-01

    As, the longevity of provisional restorations is related to, a perfect adaptation and a strong, long-term union between restoration and teeth structures, therefore, evaluation of marginal leakage of provisional restorative materials luted with cements using the standardized procedures is essential. To compare the marginal leakage of the provisional crowns fabricated from Autopolymerizing acrylic resin crowns and bisphenol A-glycidyl dimethacrylate (BIS-GMA) resin crowns. To compare the marginal leakage of the provisional crowns fabricated from autopolymerizing acrylic resin crowns and BIS-GMA resin crowns cemented with different temporary luting cements. To compare the marginal leakage of the provisional crowns fabricated from autopolymerizing acrylic resin (SC-10) crowns cemented with different temporary luting cements. To compare the marginal leakage of the provisional crowns fabricated from BIS-GMA resin crowns (Protemp 4) cemented with different temporary luting cements. Freshly extracted 60 maxillary premolars of approximately similar dimensions were mounted in dental plaster. Tooth reduction with shoulder margin was planned to use a customized handpiece-holding jig. Provisional crowns were prepared using the wax pattern fabricated from computer aided designing/computer aided manufacturing milling machine following the tooth preparation. Sixty provisional crowns were made, thirty each of SC-10 and Protemp 4 and were then cemented with three different luting cements. Specimens were thermocycled, submerged in a 2% methylene blue solution, then sectioned and observed under a stereomicroscope for the evaluation of marginal microleakage. A five-level scale was used to score dye penetration in the tooth/cement interface and the results of this study was analyzed using the Chi-square test, Mann-Whitney U-test, Kruskal-Wallis H-test and the results were statistically significant P provisional crowns cemented with three different luting cements along the axial walls of

  11. Perceived marginalization and aggression: a longitudinal study with low-educated adolescents.

    Science.gov (United States)

    Issmer, Christian; Wagner, Ulrich

    2015-03-01

    Social exclusion can evoke aggression. In the past two decades research has demonstrated this effect both for interpersonal and societal forms of exclusion. In addition, recent violent uprisings, like the London riots in August 2011, have been linked to social exclusion in the media. However, so far there is a lack of longitudinal studies which examine the aggression-enhancing effect of societal-level exclusion (i.e., marginalization) in disadvantaged groups. This research investigates the impact of perceived marginalization on aggression in a sample of N = 181 adolescents with a low educational background by means of a two-wave longitudinal study. The results of structural equation analyses are consistent with the hypothesis that perceived marginalization enhances aggression, and that this effect is mediated by the extent of negative societal meta-stereotypes. Furthermore, the reverse path from aggression to perceptions of marginalization is also significant. We discuss the implications of these findings and highlight practical consequences. © 2014 The British Psychological Society.

  12. Effect of Margin Designs on the Marginal Adaptation of Zirconia Copings.

    Science.gov (United States)

    Habib, Syed Rashid; Al Ajmi, Mohammed Ginan; Al Dhafyan, Mohammed; Jomah, Abdulrehman; Abualsaud, Haytham; Almashali, Mazen

    2017-09-01

    The aim of this in vitro study was to investigate the effect of Shoulder versus Chamfer margin design on the marginal adaptation of zirconia (Zr) copings. 40 extracted molar teeth were mounted in resin and prepared for zirconia crowns with two margin preparation designs (20=Shoulder and 20=Chamfer). The copings were manufactured by Cercon® (DeguDent GmbH, Germany) using the CAD/CAM system for each tooth. They were tried on each tooth, cemented, thermocycled, re-embedded in resin and were subsequently cross sectioned centrally into two equal mesial and distal halves. They were examined under electron microscope at 200 X magnification and the measurements were recorded at 5 predetermined points in micrometers (µm). The o verall mean marginal gap for the two groups was found to be 206.98+42.78µm with Shoulder margin design (Marginal Gap=199.50+40.72µm) having better adaptation compared to Chamfer (Marginal Gap=214.46+44.85µm). The independent-samples t-test showed a statistically non-significant difference (p=.113) between the means of marginal gap for Shoulder and Chamfer margin designs and the measurements were recorded at 5 predetermined points for the two groups. The Chamfer margin design appeared to offer the same adaptation results as the Shoulder margin design.

  13. Evaluation of the marginal fit of metal copings fabricated on three different marginal designs using conventional and accelerated casting techniques: An in vitro study

    Directory of Open Access Journals (Sweden)

    Sharad Vaidya

    2014-01-01

    Conclusion: Among the three marginal designs studied, shoulder with bevel showed the best marginal fit with conventional as well as accelerated casting techniques. Accelerated casting technique could be a vital alternative to the time-consuming conventional casting technique. The marginal fit between the two casting techniques showed no statistical difference.

  14. Intraocular pressure variations during zygomatic fracture reduction and fixation: a clinical study.

    LENUS (Irish Health Repository)

    Murray, Dylan J

    2012-02-03

    BACKGROUND: The reduction of midface fractures has been associated with the rare but devastating complication of blindness. An increase in intraocular pressure is important in the mechanism of blindness in this setting. In this study, the authors assessed the intraocular pressure in patients who underwent zygomatic fracture reduction (with or without fixation). METHODS: Using applanation tonometry, 29 patients underwent intraocular pressure measurements before, during, and after fracture fixation. The contralateral pressures were measured and used as the control. RESULTS: There were 29 patients with a mean age of 35 years, and the mean time to surgery was 5 days. Preoperatively, all patients had normal intraocular pressures and normal visual acuity. All patients underwent a Gillies lift and 18 patients required open reduction and fixation of the frontozygomatic suture (n = 4) or the infraorbital margin (n = 2), and the remainder (n = 12) required fixation of both points. There was no statistically significant increase in the intraocular pressures following the reduction of uncomplicated zygomatic fractures. Statistically significant pressure reductions were noted immediately after reduction and fixation. CONCLUSIONS: The surgical reduction of uncomplicated zygomatic fractures has no adverse effect on the intraocular pressure. It is the authors\\' opinion that adjunctive measures to reduce the pressures are unnecessary.

  15. Marginal costs of water savings from cooling system retrofits: a case study for Texas power plants

    Science.gov (United States)

    Loew, Aviva; Jaramillo, Paulina; Zhai, Haibo

    2016-10-01

    The water demands of power plant cooling systems may strain water supply and make power generation vulnerable to water scarcity. Cooling systems range in their rates of water use, capital investment, and annual costs. Using Texas as a case study, we examined the cost of retrofitting existing coal and natural gas combined-cycle (NGCC) power plants with alternative cooling systems, either wet recirculating towers or air-cooled condensers for dry cooling. We applied a power plant assessment tool to model existing power plants in terms of their key plant attributes and site-specific meteorological conditions and then estimated operation characteristics of retrofitted plants and retrofit costs. We determined the anticipated annual reductions in water withdrawals and the cost-per-gallon of water saved by retrofits in both deterministic and probabilistic forms. The results demonstrate that replacing once-through cooling at coal-fired power plants with wet recirculating towers has the lowest cost per reduced water withdrawals, on average. The average marginal cost of water withdrawal savings for dry-cooling retrofits at coal-fired plants is approximately 0.68 cents per gallon, while the marginal recirculating retrofit cost is 0.008 cents per gallon. For NGCC plants, the average marginal costs of water withdrawal savings for dry-cooling and recirculating towers are 1.78 and 0.037 cents per gallon, respectively.

  16. Marginal adaptation of newer root canal sealers to dentin: A SEM study.

    Science.gov (United States)

    Polineni, Swapnika; Bolla, Nagesh; Mandava, Pragna; Vemuri, Sayesh; Mallela, Madhusudana; Gandham, Vijaya Madhuri

    2016-01-01

    This in vitro study evaluated and compared the marginal adaptation of three newer root canal sealers to root dentin. Thirty freshly extracted human single-rooted teeth with completely formed apices were taken. Teeth were decoronated, and root canals were instrumented. The specimens were randomly divided into three groups (n = 10) based upon the sealer used. Group 1 - teeth were obturated with epoxy resin sealer (MM-Seal). Group 2 - teeth were obturated with mineral trioxide aggregate (MTA) based sealer (MTA Fillapex), Group 3 - teeth were obturated with bioceramic sealer (EndoSequence BC sealer). Later samples were vertically sectioned using hard tissue microtome and marginal adaptation of sealers to root dentin was evaluated under coronal and apical halves using scanning electron microscopy (SEM) and marginal gap values were recorded. The data were statistically analyzed by two-way ANOVA and Tukey's multiple post hoc test. The highest marginal gap was seen in Group 2 (apical-16680.00 nm, coronal-10796 nm) and the lowest marginal gap was observed in Group 1 (apical-599.42 nm, coronal-522.72 nm). Coronal halves showed superior adaptation compared to apical halves in all the groups under SEM. Within the limitations of this study epoxy resin-based MM-Seal showed good marginal adaptation than other materials tested.

  17. Confinement margins for ignition and driven operation in Iter Eda ID

    International Nuclear Information System (INIS)

    Johner, J.

    1995-09-01

    Preliminary calculations for ITER EDA ID have been performed using the 1/2D thermal equilibrium code HELIOS. It is found that: - The maximum ignition margin for ITER ID (29%) is 6% less than for ITER OD (35%) and 5% less than for ITER CDA (34%). - Decreasing the ration τ * He /τ E from the nominal value 10 to a value of 5 gives a 12% gain in the maximum ignition margin. Increasing the ration from 10 to 15 causes a 22% loss in the margin. Furthermore, ignited equilibria non longer exist for τ * He /τ E ≥ 17.6. - Operation in driven mode with 50 MW of external power increases the confinement capability by 13%. With 100 MW, the improvement is 24%. - Lowering the fusion power from 1500 to 1000 MW slightly improves the maximum ignition margin (+5%) and allows operation below the Greenwald density limit. - A 10% reduction of the toroidal magnetic field with a correlative diminution of the plasma current for constant safety factor operation, causes a dramatic reduction (-18%) of the maximum ignition margin. - A fraction of neon of 0.68% would completely suppress the ignition margin. Furthermore, ignited equilibria, with the nominal fusion power and τ * He /τ E , no longer exist when the neon fraction exceeds 0.75%. (Author). 2 refs., 10 figs

  18. Deoxycholic Acid and the Marginal Mandibular Nerve: A Cadaver Study.

    Science.gov (United States)

    Blandford, Alexander D; Ansari, Waseem; Young, Jason M; Maley, Bruce; Plesec, Thomas P; Hwang, Catherine J; Perry, Julian D

    2018-06-04

    One of the rare but serious complications observed with deoxycholic acid administration is damage to the marginal mandibular nerve. In this study, we evaluated if deoxycholic acid directly induces histologic damage to fresh cadaveric marginal mandibular nerve. A segment of marginal mandibular nerve was harvested from 12 hemifaces of 6 fresh cadavers. The nerve specimen was exposed to either 0.9% sterile saline for 24 h, deoxycholic acid (10 mg/ml) for 20 min, or deoxycholic acid (10 mg/ml) for 24 h. The nerve specimens were then fixed in glutaraldehyde for a minimum of 24 h. Toluidine blue stained sections were evaluated for stain intensity using light microscopy and color deconvolution image analysis. Supraplatysmal fat was harvested as a positive control and exposed to the same treatments as the marginal mandibular nerve specimens, then evaluated using transmission electron microscopy. Toluidine blue staining was less in the marginal mandibular nerve exposed to deoxycholic acid when compared to saline. The specimen exposed to deoxycholic acid for 24 h showed less toluidine blue staining than that of the nerve exposed to deoxycholic acid for 20 min. Transmission electron microscopy of submental fat exposed to deoxycholic acid revealed disruption of adipocyte cell membrane integrity and loss of cellular organelles when compared to specimens only exposed to saline. Deoxycholic acid (10 mg/ml) damages the marginal mandibular nerve myelin sheath in fresh human cadaver specimens. Direct deoxycholic acid neurotoxicity may cause marginal mandibular nerve injury clinically. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

  19. Marginal greenhouse gas emissions displacement of wind power in Great Britain

    International Nuclear Information System (INIS)

    Thomson, R. Camilla; Harrison, Gareth P.; Chick, John P.

    2017-01-01

    There is considerable uncertainty over the effect of wind power on the operation of power systems, and the consequent greenhouse gas (GHG) emissions displacement; this is used to project emissions reductions that inform energy policy. Currently, it is approximated as the average emissions of the whole system, despite an acknowledgement that wind will actually displace only the generators operating on the margin. This article presents a methodology to isolate the marginal emissions displacement of wind power from historical empirical data, taking into account the impact on the operating efficiency of coal and CCGT plants. For Great Britain over 2009–2014, it was found that marginal emissions displacement has generally been underestimated with, for example, the emissions displacement factor for wind being 21% higher than that the average emissions factor in 2010. The actual displacement depends upon the relative merit of coal and CCGT, with a greater discrepancy between marginal displacement and average emissions during more normal system operation, suggesting that policies to penalise high-carbon generation can increase the effectiveness of wind at reducing GHG emissions. Furthermore, it was also identified that wind power is almost as technically effective as demand-side reductions at decreasing GHG emissions from power generation. - Highlights: • Marginal emissions displacement was calculated from operational data for 2009–2014. • Existing estimates of emissions displacement are generally low. • Emissions displacement is a function of the relative merit of coal and CCGT plants. • Policies to penalise high-carbon generation should increase emissions displacement. • Wind almost as effective as demand-reduction at reducing emissions.

  20. Recent progress in Pacific-Asian Marginal Seas (PAMS) studies

    Science.gov (United States)

    Matsuno, Takeshi; Hirose, Naoki; Zhang, Jing; Cho, Yang-Ki; Chen, Dake; Yuan, Dongliang; Hung, Chin-Chang; Jan, Sen

    2017-07-01

    Marginal seas which represent the buffer zones between land and the pelagic ocean are being increasingly influenced by human activity. The role of the marginal seas is important for many reasons, among which are biological resources and climate change. In East Asia, we have marginal seas between the Asian Continent and the Pacific Ocean, where various countries and areas form complicated territories and EEZ. To understand the marine environment of marginal seas, international cooperative scientific activities are necessary, and it is essential to share the latest information and knowledge.

  1. Safety margins in older adults increase with improved control of a dynamic object

    Science.gov (United States)

    Hasson, Christopher J.; Sternad, Dagmar

    2014-01-01

    Older adults face decreasing motor capabilities due to pervasive neuromuscular degradations. As a consequence, errors in movement control increase. Thus, older individuals should maintain larger safety margins than younger adults. While this has been shown for object manipulation tasks, several reports on whole-body activities, such as posture and locomotion, demonstrate age-related reductions in safety margins. This is despite increased costs for control errors, such as a fall. We posit that this paradox could be explained by the dynamic challenge presented by the body or also an external object, and that age-related reductions in safety margins are in part due to a decreased ability to control dynamics. To test this conjecture we used a virtual ball-in-cup task that had challenging dynamics, yet afforded an explicit rendering of the physics and safety margin. The hypotheses were: (1) When manipulating an object with challenging dynamics, older adults have smaller safety margins than younger adults. (2) Older adults increase their safety margins with practice. Nine young and 10 healthy older adults practiced moving the virtual ball-in-cup to a target location in exactly 2 s. The accuracy and precision of the timing error quantified skill, and the ball energy relative to an escape threshold quantified the safety margin. Compared to the young adults, older adults had increased timing errors, greater variability, and decreased safety margins. With practice, both young and older adults improved their ability to control the object with decreased timing errors and variability, and increased their safety margins. These results suggest that safety margins are related to the ability to control dynamics, and may explain why in tasks with simple dynamics older adults use adequate safety margins, but in more complex tasks, safety margins may be inadequate. Further, the results indicate that task-specific training may improve safety margins in older adults. PMID:25071566

  2. Safety Margins in Older Adults Increase with Improved Control of a Dynamic Object

    Directory of Open Access Journals (Sweden)

    Christopher James Hasson

    2014-07-01

    Full Text Available Older adults face decreasing motor capabilities due to pervasive neuromuscular degradations. As a consequence errors in movement control increase. Thus, older individuals should maintain larger safety margins than younger adults. While this has been shown for object manipulation tasks, several reports on whole-body activities, such as posture and locomotion, however demonstrate age-related reductions in safety margins. This is despite increased costs for control errors, such as a fall. We posit that this paradox could be explained by the dynamic challenge presented by the body or an external object, and that age-related reductions in safety margins are in part due to a decreased ability to control dynamics. To test this conjecture we used a virtual ball-in-cup task that had challenging dynamics, yet afforded an explicit rendering of the physics and safety margin. The hypotheses were: 1 When manipulating an object with challenging dynamics, older adults have smaller safety margins than younger adults. 2 Older adults increase their safety margins with practice. Nine young and 10 healthy older adults practiced moving the virtual ball-in-cup to a target location in exactly two seconds. The accuracy and precision of the timing error quantified skill and the ball energy relative to an escape threshold quantified the safety margin. Compared to the young adults, older adults had increased timing errors, greater variability, and decreased safety margins. With practice, both young and older adults improved their ability to control the object with decreased timing errors and variability, and increased their safety margins. These results suggest that safety margins are related to the ability to control dynamics, and may explain why in tasks with simple dynamics older adults use adequate safety margins, but in more complex tasks, safety margins may be inadequate. Further, the results indicate that task-specific training may improve safety margins in older

  3. Comparison of Marginal Circumference of Two Different Pre-Crimped Stainless Steel Crowns for Primary Molars After Re-Crimping.

    Science.gov (United States)

    Afshar, Hossein; Ghandehari, Mehdi; Soleimani, Banafsheh

    2015-12-01

    It is not clear what type of pre-crimped crown is more successful in achieving greater marginal adaptation following re-crimping. This study aimed to assess the changes in the circumference of 3M ESPE and MIB pre-crimped stainless steel crowns (SSCs) for the primary maxillary and mandibular first and second molars following re-crimping. This was an in-vitro, experimental study. Initial photographs were obtained from the margins of 3M and MIB SSCs for the upper and lower primary molars using a digital camera. Crown margins were crimped by applying 0.2N force using 114 and 137 pliers. Post-crimping photographs were also obtained and the changes in crown circumference after crimping were calculated using AutoCad software. The percentage of reduction in the circumference of crowns for each tooth was statistically analyzed based on the type of crown using student t-test. The effect of crown design and the associated teeth on the decreased circumference percentage was statistically analyzed by two-sided ANOVA. The percentage of reduction in lower E SSC circumference was 3.71±0.39% in MIB and 6.29±0.62% in 3M crowns. These values were 3.55±0.55% and 7.15±1.13% for the lower Ds, and 3.95±0.43 and 6.24±0.85% for the upper Ds, respectively. For the upper Es, these values were found to be 3.12±0.65% and 5.14±0.94%, respectively. For each tooth, a significant difference was found between MIB and 3M SSCs in terms of the percentage of reduction in crown circumference following crimping. The magnitude of this reduction was smaller in MIB compared to 3M SSCs (P<0.001). Considering the significant reduction in the marginal circumference of precrimped SSCs following re-crimping, it appears that this manipulation must be necessarily performed for MIB and 3M pre-crimped SSCs. By using 3M SSCs, higher marginal adaptation can be achieved following crimping.

  4. Marginal abatement cost curves for NOx that account for ...

    Science.gov (United States)

    A marginal abatement cost curve (MACC) traces out the relationship between the quantity of pollution abated and the marginal cost of abating each additional unit. In the context of air quality management, MACCs typically are developed by sorting end-of-pipe controls by their respective cost effectiveness. Alternative measures, such as renewable electricity, energy efficiency, and fuel switching (RE/EE/FS), are not considered as it is difficult to quantify their abatement potential. In this paper, we demonstrate the use of an energy system model to develop a MACC for nitrogen oxides (NOx) that incorporates both end-of-pipe controls and these alternative measures. We decompose the MACC by sector, and evaluate the cost-effectiveness of RE/EE/FS relative to end-of-pipe controls. RE/EE/FS are shown to produce considerable emission reductions after end-of-pipe controls have been exhausted. Furthermore, some RE/EE/FS are shown to be cost-competitive with end-of-pipe controls. Demonstrate how the MARKAL energy system model can be used to evaluate the potential role of renewable electricity, energy efficiency and fuel switching (RE/EE/FS) in achieving NOx reductions. For this particular analysis, we show that RE/EE/FSs are able to increase the quantity of NOx reductions available for a particular marginal cost (ranging from $5k per ton to $40k per ton) by approximately 50%.

  5. Meta-analysis of studies with bivariate binary outcomes: a marginal beta-binomial model approach.

    Science.gov (United States)

    Chen, Yong; Hong, Chuan; Ning, Yang; Su, Xiao

    2016-01-15

    When conducting a meta-analysis of studies with bivariate binary outcomes, challenges arise when the within-study correlation and between-study heterogeneity should be taken into account. In this paper, we propose a marginal beta-binomial model for the meta-analysis of studies with binary outcomes. This model is based on the composite likelihood approach and has several attractive features compared with the existing models such as bivariate generalized linear mixed model (Chu and Cole, 2006) and Sarmanov beta-binomial model (Chen et al., 2012). The advantages of the proposed marginal model include modeling the probabilities in the original scale, not requiring any transformation of probabilities or any link function, having closed-form expression of likelihood function, and no constraints on the correlation parameter. More importantly, because the marginal beta-binomial model is only based on the marginal distributions, it does not suffer from potential misspecification of the joint distribution of bivariate study-specific probabilities. Such misspecification is difficult to detect and can lead to biased inference using currents methods. We compare the performance of the marginal beta-binomial model with the bivariate generalized linear mixed model and the Sarmanov beta-binomial model by simulation studies. Interestingly, the results show that the marginal beta-binomial model performs better than the Sarmanov beta-binomial model, whether or not the true model is Sarmanov beta-binomial, and the marginal beta-binomial model is more robust than the bivariate generalized linear mixed model under model misspecifications. Two meta-analyses of diagnostic accuracy studies and a meta-analysis of case-control studies are conducted for illustration. Copyright © 2015 John Wiley & Sons, Ltd.

  6. Lateral view dissection of the prostato-urethral junction to reduce positive apical margin in laparoscopic radical prostatectomy.

    Science.gov (United States)

    Sasaki, Hiroshi; Miki, Jun; Kimura, Takahiro; Sanuki, Kunitaro; Miki, Kenta; Takahashi, Hiroyuki; Egawa, Shin

    2009-08-01

    To assess the impact of lateral view apical dissection in laparoscopic radical prostatectomy (LRP) on the reduction of positive surgical margin rates and recovery of postoperative continence. One hundred and forty-four consecutive patients underwent LRP from October 2004 to March 2008. Lateral view dissection of the prostato-urethral junction was conducted in 76 of them (Group 2). Standard dissection was used in the remaining patients (Group 1). The effect of this technical modification on the reduction of positive surgical margin rates and postoperative recovery of urinary continence was assessed in the two groups. Overall, the incidence of positive margins decreased from 23 (35.9%) in Group 1 to 16 cases (21.9%) in Group 2 (P = 0.07). Positive margin rates in pT2 decreased from 30.6% to 6.5% (P = 0.006). Apical and dorso-apical margins were reduced from 26.5% to 4.3% (P = 0.009) and from 10.2% to 0% (P Lateral view dissection of the prostato-urethral junction is an easily applicable technical modification. It provides better visualization of apical anatomy substantially contributing to the reduction of positive surgical margin rates, especially at the level of prostatic apex.

  7. Evaluation of the marginal fit of metal copings fabricated on three different marginal designs using conventional and accelerated casting techniques: an in vitro study.

    Science.gov (United States)

    Vaidya, Sharad; Parkash, Hari; Bhargava, Akshay; Gupta, Sharad

    2014-01-01

    Abundant resources and techniques have been used for complete coverage crown fabrication. Conventional investing and casting procedures for phosphate-bonded investments require a 2- to 4-h procedure before completion. Accelerated casting techniques have been used, but may not result in castings with matching marginal accuracy. The study measured the marginal gap and determined the clinical acceptability of single cast copings invested in a phosphate-bonded investment with the use of conventional and accelerated methods. One hundred and twenty cast coping samples were fabricated using conventional and accelerated methods, with three finish lines: Chamfer, shoulder and shoulder with bevel. Sixty copings were prepared with each technique. Each coping was examined with a stereomicroscope at four predetermined sites and measurements of marginal gaps were documented for each. A master chart was prepared for all the data and was analyzed using Statistical Package for the Social Sciences version. Evidence of marginal gap was then evaluated by t-test. Analysis of variance and Post-hoc analysis were used to compare two groups as well as to make comparisons between three subgroups . Measurements recorded showed no statistically significant difference between conventional and accelerated groups. Among the three marginal designs studied, shoulder with bevel showed the best marginal fit with conventional as well as accelerated casting techniques. Accelerated casting technique could be a vital alternative to the time-consuming conventional casting technique. The marginal fit between the two casting techniques showed no statistical difference.

  8. Studying media at The Margins: learning from the field

    Directory of Open Access Journals (Sweden)

    Clemencia Rodríguez

    2016-07-01

    Full Text Available This article, informed by ethnographic research on media at the margins, proposes a shift in perspective at several different levels: 1 instead of focusing on individual technologies, our research should examine how grassroots communicators operating at the margins exist in a media ecology that offers different potentialities in each historical situation; 2 instead of trying to determine if the media technologies used at the margin are old or new, digital or not digital, we need to explore how embedded community communicators detect local information or communication needs and use available technologies to address these needs; 3 our research on media at the margins should shed light on how grassroots communicators re-invent, hybridize, converge, and bridge technologies from one platform to another. In sum, understanding media at the margins is about embracing complexity, maintaining the notion of media ecologies, and understanding how grassroots communicators, deeply embedded in local contexts, wedge media technologies into everyday life.

  9. Economic assessment of Operational Energy reduction options in a house using Marginal Benefit and Marginal Cost: A case in Bangi, Malaysia

    International Nuclear Information System (INIS)

    Wan Rahmah Mohd Zaki; Abdul Hadi Nawawi; Sabarinah Sh Ahmad

    2010-01-01

    Energy Efficient (EE) appliances such as Compact Fluorescent Light (CFL) bulbs and Renewable Energy (RE), namely solar Photovoltaic (PV) can help to reduce Operational Energy (OE) in a house. In addition, a house should also incorporate Passive Architecture (PA) design strategies which in the hot and humid tropical climate, mean avoiding direct heat gain, encouraging natural cross ventilation and optimising the abundant daylight. Nevertheless, reducing OE must also mean economic gain to households to encourage their participation. Common economic gauges such as Return on Investment, Payback Period, Cost Benefit Analysis, Life Cycle Assessment and Life Cycle Cost are not suitable to validate OE options in households. These economic gauges approach economic assessment as an end-result on the cost side of the product and may result for good intention to be shelved, primarily because EE equipment and RE have high capital cost compared with the alternatives. On the other hand, reducing OE in houses is actually a continual progression from the status quo and there is always a marginal gain in doing so. The challenge is to know how much is the marginal benefit against the marginal cost of investing in EE and RE. In Economics, the ratio of Marginal Cost (MC) and Marginal Benefits (MB) measure additional benefits of every additional costs of investment at a specific level of production and consumption; and Economists suggests that effective gain and loss should be compared to the status quo, i.e., Relative Position (RP). The Economics theories of MC, MB and RP are being adapted to measure the progression of reducing OE. The living/dining area in two types of houses: with and without PA design strategies are simulated to use conventional incandescent light bulbs and CFL as well as solar PV in lieu of the mains electricity supply. The power requirement for artificial lighting in every case is translated into monetary value and the ratio of MB against MC for each case shows

  10. Marginal cost curves for water footprint reduction in irrigated agriculture: guiding a cost-effective reduction of crop water consumption to a permit or benchmark level

    Directory of Open Access Journals (Sweden)

    A. D. Chukalla

    2017-07-01

    Full Text Available Reducing the water footprint (WF of the process of growing irrigated crops is an indispensable element in water management, particularly in water-scarce areas. To achieve this, information on marginal cost curves (MCCs that rank management packages according to their cost-effectiveness to reduce the WF need to support the decision making. MCCs enable the estimation of the cost associated with a certain WF reduction target, e.g. towards a given WF permit (expressed in m3  ha−1 per season or to a certain WF benchmark (expressed in m3  t−1 of crop. This paper aims to develop MCCs for WF reduction for a range of selected cases. AquaCrop, a soil-water-balance and crop-growth model, is used to estimate the effect of different management packages on evapotranspiration and crop yield and thus the WF of crop production. A management package is defined as a specific combination of management practices: irrigation technique (furrow, sprinkler, drip or subsurface drip; irrigation strategy (full or deficit irrigation; and mulching practice (no, organic or synthetic mulching. The annual average cost for each management package is estimated as the annualized capital cost plus the annual costs of maintenance and operations (i.e. costs of water, energy and labour. Different cases are considered, including three crops (maize, tomato and potato; four types of environment (humid in UK, sub-humid in Italy, semi-arid in Spain and arid in Israel; three hydrologic years (wet, normal and dry years and three soil types (loam, silty clay loam and sandy loam. For each crop, alternative WF reduction pathways were developed, after which the most cost-effective pathway was selected to develop the MCC for WF reduction. When aiming at WF reduction one can best improve the irrigation strategy first, next the mulching practice and finally the irrigation technique. Moving from a full to deficit irrigation strategy is found to be a no-regret measure: it reduces the WF

  11. Marginal cost curves for water footprint reduction in irrigated agriculture: guiding a cost-effective reduction of crop water consumption to a permit or benchmark level

    Science.gov (United States)

    Chukalla, Abebe D.; Krol, Maarten S.; Hoekstra, Arjen Y.

    2017-07-01

    Reducing the water footprint (WF) of the process of growing irrigated crops is an indispensable element in water management, particularly in water-scarce areas. To achieve this, information on marginal cost curves (MCCs) that rank management packages according to their cost-effectiveness to reduce the WF need to support the decision making. MCCs enable the estimation of the cost associated with a certain WF reduction target, e.g. towards a given WF permit (expressed in m3  ha-1 per season) or to a certain WF benchmark (expressed in m3  t-1 of crop). This paper aims to develop MCCs for WF reduction for a range of selected cases. AquaCrop, a soil-water-balance and crop-growth model, is used to estimate the effect of different management packages on evapotranspiration and crop yield and thus the WF of crop production. A management package is defined as a specific combination of management practices: irrigation technique (furrow, sprinkler, drip or subsurface drip); irrigation strategy (full or deficit irrigation); and mulching practice (no, organic or synthetic mulching). The annual average cost for each management package is estimated as the annualized capital cost plus the annual costs of maintenance and operations (i.e. costs of water, energy and labour). Different cases are considered, including three crops (maize, tomato and potato); four types of environment (humid in UK, sub-humid in Italy, semi-arid in Spain and arid in Israel); three hydrologic years (wet, normal and dry years) and three soil types (loam, silty clay loam and sandy loam). For each crop, alternative WF reduction pathways were developed, after which the most cost-effective pathway was selected to develop the MCC for WF reduction. When aiming at WF reduction one can best improve the irrigation strategy first, next the mulching practice and finally the irrigation technique. Moving from a full to deficit irrigation strategy is found to be a no-regret measure: it reduces the WF by reducing water

  12. Clinical study of the marginal microfiltration in restorations with amalgam applying sealant cavitario

    OpenAIRE

    Lahoud Salem, Víctor; Mendoza Zapata, Janet; Vidal Goñi, Raúl

    2014-01-01

    The present study to evaluate the clinical evaluation, marginal leakage of 30 amalgams restorations with sealers cavity and 30 amalgams restorations not sealers cavity. After of 12 months observation in amalgams restorations with sealers cavity 100% success in marginal leakage and not presents of secondary caries, not to have presents clinical cases of sensitivity post-operative and pulp inflammation. El presente estudio consistió en evaluar clínicamente la microfiltración marginal en 30 r...

  13. Biodiversity and agro-ecology in field margins.

    Science.gov (United States)

    De Cauwer, B; Reheul, D; Nijs, I; Milbau, A

    2005-01-01

    This multidisciplinary study investigates agro-ecological functions (nature conservation, agriculture, environment) and implications of newly created, mown sown and unsown field margin strips installed on ex-arable land to increase biodiversity. From conservational concern, the development of species rich field margin strips was not strongly affected by the installed type of margin strip since species diversity converged over time, whether strips were sown or not. Convergence between unsown and sown margin strips occurred also in terms of species composition: unsown and sown strips became similar over time. Mowing without removal of cuttings significantly reduced species richness, yielded more grassy margin strips and delayed similarity in species composition between sown and unsown margin strips. Species richness on the longer term was not significantly affected by light regime nor by disturbance despite significant temporary effects shortly after the disturbance event. On the contrary vegetation composition in terms of importance of functional groups changed after disturbance: the share of spontaneous species within functional groups increased resulting in higher similarity between the sown and unsown vegetation. Furthermore risk of invasion was highest in the disturbed unsown community on the unshaded side of a tree lane. A positive effect of botanical diversity on insect number and diversity was found. However the effects of botanical diversity on insect number was mediated by light regime. At high light availability differences between plant communities were more pronounced compared to low light availablilty. The abundance of some insect families was dependent on the vegetation composition. Furthermore light availability significantly influenced insect diversity as well as the spatial distribution of families. From agricultural concern, installing margin strips by sowing a species mixture and a mowing regime with removal of cuttings are good practices to

  14. STUDI PERBANDINGAN ANTARA ALGORITMA BIVARIATE MARGINAL DISTRIBUTION DENGAN ALGORITMA GENETIKA

    Directory of Open Access Journals (Sweden)

    Chastine Fatichah

    2006-01-01

    Full Text Available Bivariate Marginal Distribution Algorithm is extended from Estimation of Distribution Algorithm. This heuristic algorithm proposes the new approach for recombination of generate new individual that without crossover and mutation process such as genetic algorithm. Bivariate Marginal Distribution Algorithm uses connectivity variable the pair gene for recombination of generate new individual. Connectivity between variable is doing along optimization process. In this research, genetic algorithm performance with one point crossover is compared with Bivariate Marginal Distribution Algorithm performance in case Onemax, De Jong F2 function, and Traveling Salesman Problem. In this research, experimental results have shown performance the both algorithm is dependence of parameter respectively and also population size that used. For Onemax case with size small problem, Genetic Algorithm perform better with small number of iteration and more fast for get optimum result. However, Bivariate Marginal Distribution Algorithm perform better of result optimization for case Onemax with huge size problem. For De Jong F2 function, Genetic Algorithm perform better from Bivariate Marginal Distribution Algorithm of a number of iteration and time. For case Traveling Salesman Problem, Bivariate Marginal Distribution Algorithm have shown perform better from Genetic Algorithm of optimization result. Abstract in Bahasa Indonesia : Bivariate Marginal Distribution Algorithm merupakan perkembangan lebih lanjut dari Estimation of Distribution Algorithm. Algoritma heuristik ini mengenalkan pendekatan baru dalam melakukan rekombinasi untuk membentuk individu baru, yaitu tidak menggunakan proses crossover dan mutasi seperti pada Genetic Algorithm. Bivariate Marginal Distribution Algorithm menggunakan keterkaitan pasangan variabel dalam melakukan rekombinasi untuk membentuk individu baru. Keterkaitan antar variabel tersebut ditemukan selama proses optimasi berlangsung. Aplikasi yang

  15. Factors of U.S. Hospitals Associated with Improved Profit Margins: An Observational Study.

    Science.gov (United States)

    Ly, Dan P; Cutler, David M

    2018-02-14

    Hospitals face financial pressure from decreased margins from Medicare and Medicaid and lower reimbursement from consolidating insurers. The objectives of this study are to determine whether hospitals that became more profitable increased revenues or decreased costs more and to examine characteristics associated with improved financial performance over time. The design of this study is retrospective analyses of U.S. non-federal acute care hospitals between 2003 and 2013. There are 2824 hospitals as subjects of this study. The main measures of this study are the change in clinical operating margin, change in revenues per bed, and change in expenses per bed between 2003 and 2013. Hospitals that became more profitable had a larger magnitude of increases in revenue per bed (about $113,000 per year [95% confidence interval: $93,132 to $133,401]) than of decreases in costs per bed (about - $10,000 per year [95% confidence interval: - $28,956 to $9617]), largely driven by higher non-Medicare reimbursement. Hospitals that improved their margins were larger or joined a hospital system. Not-for-profit status was associated with increases in operating margin, while rural status and having a larger share of Medicare patients were associated with decreases in operating margin. There was no association between improved hospital profitability and changes in diagnosis related group weight, in number of profitable services, or in payer mix. Hospitals that became more profitable were more likely to increase their admissions per bed per year. Differential price increases have led to improved margins for some hospitals over time. Where significant price increases are not possible, hospitals will have to become more efficient to maintain profitability.

  16. Comparison of Marginal Circumference of Two Different Pre-crimped Stainless Steel Crowns for Primary Molars After Re-crimping

    Directory of Open Access Journals (Sweden)

    Hossein Afshar

    2016-08-01

    Full Text Available Objectives: It is not clear what type of pre-crimped crown is more successful in achieving greater marginal adaptation following re-crimping. This study aimed to assess the changes in the circumference of 3M ESPE and MIB pre-crimped stainless steel crowns (SSCs for the primary maxillary and mandibular first and second molars following re-crimping.Materials and Methods: This was an in-vitro, experimental study. Initial photographs were obtained from the margins of 3M and MIB SSCs for the upper and lower primary molars using a digital camera. Crown margins were crimped by applying 0.2N force using 114 and 137 pliers. Post-crimping photographs were also obtained and the changes in crown circumference after crimping were calculated using AutoCad software. The percentage of reduction in the circumference of crowns for each tooth was statistically analyzed based on the type of crown using student t-test. The effect of crown design and the associated teeth on the decreased circumference percentage was statistically analyzed by two-sided ANOVA.Results: The percentage of reduction in lower E SSC circumference was 3.71±0.39% in MIB and 6.29±0.62% in 3M crowns. These values were 3.55±0.55% and 7.15±1.13% for the lower Ds, and 3.95±0.43 and 6.24±0.85% for the upper Ds, respectively. For the upper Es, these values were found to be 3.12±0.65% and 5.14±0.94%, respectively. For each tooth, a significant difference was found between MIB and 3M SSCs in terms of the percentage of reduction in crown circumference following crimping. The magnitude of this reduction was smaller in MIB compared to 3M SSCs (P<0.001.Conclusion: Considering the significant reduction in the marginal circumference of pre-crimped SSCs following re-crimping, it appears that this manipulation must be necessarily performed for MIB and 3M pre-crimped SSCs. By using 3M SSCs, higher marginal adaptation can be achieved following crimping.

  17. Does consideration of GHG reductions change local decision making? A Case Study in Chile

    Science.gov (United States)

    Cifuentes, L. A.; Blumel, G.

    2003-12-01

    While local air pollution has been a public concern in developing countries for some time, climate change is looked upon as a non-urgent, developed world problem. In this work we present a case study of the interaction of measures to abate air pollution and measures to mitigate GHG emissions in Santiago, Chile, with the purpose of determining if the consideration of reductions in GHG affects the decisions taken to mitigate local air pollution. The emissions reductions of both GHG and local air pollutants were estimated from emission factors (some derived locally) and changes in activity levels. Health benefits due to air pollution abatement were computed using figures derived previously for the cost benefit analysis of Santiago's Decontamination Plan, transferred to the different cities taking into consideration local demographic and income data. The Santiago estimates were obtained using the damage function approach, based on some local epidemiological studies, and on local health and demographic data. Unit social values for the effects were estimated locally (for cost of treatment and lost productivity values) or extrapolated from US values (mainly for WTP values) using the ratio of per-capita income and an income elasticity of 1. The average benefits of emission abatement (in 1997 US\\ per ton) are 1,800 (1,200-2300) for NOx, 3,000 (2,100-3900) for SO2, 31,900 (21,900 - 41,900) for PM, and 630 (430 - 830) for resuspended dust. Economic benefits due to carbon reduction were considered at 3.5, 10 and 20 UStCO2. Marginal abatement cost curves were constructed considering private and net costs (private less the potential sales of carbon credits) Due to the bottom-up approach to constructing the marginal cost curve, many abatement measures (like congestion tolls and CNG instead of diesel buses) amounting to 8% reduction of PM2.5 concentration, exhibit a negative private cost. If the health benefits are considered for the decision, a maximum reduction of 22% in PM2

  18. Digital Margins : How spatially and socially marginalized communities deal with digital exclusion

    NARCIS (Netherlands)

    Salemink, Koen

    2016-01-01

    The increasing importance of the Internet as a means of communication has transformed economies and societies. For spatially and socially marginalized communities, this transformation has resulted in digital exclusion and further marginalization. This book presents a study of two kinds of

  19. The marginal fit of selective laser melting-fabricated metal crowns: an in vitro study.

    Science.gov (United States)

    Xu, Dan; Xiang, Nan; Wei, Bin

    2014-12-01

    The selective laser melting technique is attracting interest in prosthetic dentistry. The marginal fit is a key criterion for fixed restorations. The purpose of the study was to evaluate the marginal fit of cast cobalt-chromium alloy crowns versus the fit of selective laser melting-fabricated crowns. The marginal gap widths of 36 single crowns (18 selective laser melting-fabricated cobalt-chromium metal crowns and 18 cobalt-chromium cast crowns) were determined with a silicone replica technique. Each crown specimen was cut into 4 sections, and the marginal gap width of each cross section was evaluated by stereomicroscopy (× 100). The Student t test was used to evaluate whether significant differences occurred in the marginal gap widths between the selective laser melting-fabricated and cast cobalt-chromium metal crowns (α=.05). The mean marginal gap width of the cast crowns (170.19 μm) was significantly wider than that of the selective laser melting-fabricated crowns (102.86 μm). Selective laser melting-fabricate cobalt-chromium dental crowns found improved marginal gap widths compared with traditional cast crowns. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  20. Analysis of PTV margin for IMRT and VMAT techniques in prostate cancer using IGRT

    International Nuclear Information System (INIS)

    Sandrini, E.S.; Silveira, T.B.; Vieira, D.S.; Anjos, L.E.A.; Lopez, J.C.C.; Batista, D.V.S.

    2014-01-01

    Clinical radiotherapy procedures aim at high precision. However, there are many errors sources that act during treatment preparation and execution that limit its accuracy. The use of imaged-guided radiotherapy (IGRT) increases the agreement between the planned dose and the actual dose deposited in the target, at the same time allows to evaluate the uncertainties related to the setup and a possible reduction in the planning target volume (PTV) margin. Thus the aim of this study was to determine the best PTV margin to be used in radiotherapy treatment of prostate cancer using intensity modulated radiotherapy (IMRT) and volumetric modulated arc radiotherapy (VMAT) techniques associated with IGRT. A total of four patients with prostate daily cone beam computed tomography (CBCT) were analyzed. Systematic and random errors were calculated statistically based on the displacements couch for 128 CBCTs. It was found that a symmetric margin of 0.75 cm from clinical treatment volume (CTV) to PTV is sufficient to encompass the uncertainties inherent to the treatment applying IGRT. Besides without that and maintaining the same tumor control probability, a symmetric margin of 1,24 cm would be necessary. This study showed that using daily image verification the setup errors are reduced, which generates a lower PTV margin. (author)

  1. Correlation between margin fit and microleakage in complete crowns cemented with three luting agents

    Directory of Open Access Journals (Sweden)

    Paulo Henrique Orlato Rossetti

    2008-02-01

    Full Text Available Microleakage can be related to margin misfit. Also, traditional microleakage techniques are time-consuming. This study evaluated the existence of correlation between in vitro margin fit and a new microleakage technique for complete crowns cemented with 3 different luting agents. Thirty human premolars were prepared for full-coverage crowns with a convergence angle of 6 degrees, chamfer margin of 1.2 mm circumferentially, and occlusal reduction of 1.5 mm. Ni-Cr cast crowns were cemented with either zinc phosphate (ZP (S.S. White, resin-modified glass-ionomer (RMGI (Rely X Luting Cement or a resin-based luting agent (RC (Enforce. Margin fit (seating discrepancy and margin gap was evaluated according to criteria in the literature under microscope with 0.001 mm accuracy. After thermal cycling, crowns were longitudinally sectioned and microleakage scores at tooth-cement interface were obtained and recorded at ×100 magnification. Margin fit parameters were compared with the one-way ANOVA test and microleakage scores with Kruskal-Wallis and Dunn's tests (alpha=0.05. Correlation between margin fit and microleakage was analyzed with the Spearman's test (alpha=0.05. Seating discrepancy and marginal gap values ranged from 81.82 µm to 137.22 µm (p=0.117, and from 75.42 µm to 78.49 µm (p=0.940, respectively. Marginal microleakage scores were ZP=3.02, RMGI=0.35 and RC=0.12 (p0.05. Conclusion: Margin fit parameters and microleakage showed no strong correlations; cast crowns cemented with RMGI and RC had lower microleakage scores than ZP cement.

  2. Uncertainty quantification of CO2 emission reduction for maritime shipping

    International Nuclear Information System (INIS)

    Yuan, Jun; Ng, Szu Hui; Sou, Weng Sut

    2016-01-01

    The International Maritime Organization (IMO) has recently proposed several operational and technical measures to improve shipping efficiency and reduce the greenhouse gases (GHG) emissions. The abatement potentials estimated for these measures have been further used by many organizations to project future GHG emission reductions and plot Marginal Abatement Cost Curves (MACC). However, the abatement potentials estimated for many of these measures can be highly uncertain as many of these measures are new, with limited sea trial information. Furthermore, the abatements obtained are highly dependent on ocean conditions, trading routes and sailing patterns. When the estimated abatement potentials are used for projections, these ‘input’ uncertainties are often not clearly displayed or accounted for, which can lead to overly optimistic or pessimistic outlooks. In this paper, we propose a methodology to systematically quantify and account for these input uncertainties on the overall abatement potential forecasts. We further propose improvements to MACCs to better reflect the uncertainties in marginal abatement costs and total emissions. This approach provides a fuller and more accurate picture of abatement forecasts and potential reductions achievable, and will be useful to policy makers and decision makers in the shipping industry to better assess the cost effective measures for CO 2 emission reduction. - Highlights: • We propose a systematic method to quantify uncertainty in emission reduction. • Marginal abatement cost curves are improved to better reflect the uncertainties. • Percentage reduction probability is given to determine emission reduction target. • The methodology is applied to a case study on maritime shipping.

  3. Air-sea interactions in the marginal ice zone

    Directory of Open Access Journals (Sweden)

    Seth Zippel

    2016-03-01

    Full Text Available Abstract The importance of waves in the Arctic Ocean has increased with the significant retreat of the seasonal sea-ice extent. Here, we use wind, wave, turbulence, and ice measurements to evaluate the response of the ocean surface to a given wind stress within the marginal ice zone, with a focus on the local wind input to waves and subsequent ocean surface turbulence. Observations are from the Beaufort Sea in the summer and early fall of 2014, with fractional ice cover of up to 50%. Observations showed strong damping and scattering of short waves, which, in turn, decreased the wind energy input to waves. Near-surface turbulent dissipation rates were also greatly reduced in partial ice cover. The reductions in waves and turbulence were balanced, suggesting that a wind-wave equilibrium is maintained in the marginal ice zone, though at levels much less than in open water. These results suggest that air-sea interactions are suppressed in the marginal ice zone relative to open ocean conditions at a given wind forcing, and this suppression may act as a feedback mechanism in expanding a persistent marginal ice zone throughout the Arctic.

  4. Pickering seismic safety margin

    International Nuclear Information System (INIS)

    Ghobarah, A.; Heidebrecht, A.C.; Tso, W.K.

    1992-06-01

    A study was conducted to recommend a methodology for the seismic safety margin review of existing Canadian CANDU nuclear generating stations such as Pickering A. The purpose of the seismic safety margin review is to determine whether the nuclear plant has sufficient seismic safety margin over its design basis to assure plant safety. In this review process, it is possible to identify the weak links which might limit the seismic performance of critical structures, systems and components. The proposed methodology is a modification the EPRI (Electric Power Research Institute) approach. The methodology includes: the characterization of the site margin earthquake, the definition of the performance criteria for the elements of a success path, and the determination of the seismic withstand capacity. It is proposed that the margin earthquake be established on the basis of using historical records and the regional seismo-tectonic and site specific evaluations. The ability of the components and systems to withstand the margin earthquake is determined by database comparisons, inspection, analysis or testing. An implementation plan for the application of the methodology to the Pickering A NGS is prepared

  5. Studies on correlation of positive surgical margin with clinicopathological factors and prognoses in breast conserving surgery

    International Nuclear Information System (INIS)

    Nishimura, Reiki; Nagao, Kazuharu; Miyayama, Haruhiko

    1999-01-01

    Out of 484 cases with breast conserving surgery between April 1989 and March 1999, surgical procedures of 34 cases were changed to total mastectomy due to positive surgical margins. In this study we evaluated a clinical significance of surgical margin in relation to clinicopathological factors and prognoses. Ninety-nine cases (20.5%) had positive margins that were judged when cancer cells existed within 5 mm from margin. In multivariate analysis of factors for surgical margin, EIC-comedo status, ly, located site, proliferative activity, and age were significant and independent factors. Regarding local recurrence, positive margin, age, ER and proliferative activity were significant factors in multivariate analysis, especially in cases not receiving postoperative radiation therapy. Radiation therapy may be beneficial for patients with positive surgical margin. And patients with breast recurrence alone had significantly higher survival rates. Therefore, it is suggested that surgical margin may not reflect survival, although it is a significant factor for local recurrence. (author)

  6. Studies on correlation of positive surgical margin with clinicopathological factors and prognoses in breast conserving surgery

    Energy Technology Data Exchange (ETDEWEB)

    Nishimura, Reiki; Nagao, Kazuharu; Miyayama, Haruhiko [Kumamoto City Hospital (Japan)

    1999-09-01

    Out of 484 cases with breast conserving surgery between April 1989 and March 1999, surgical procedures of 34 cases were changed to total mastectomy due to positive surgical margins. In this study we evaluated a clinical significance of surgical margin in relation to clinicopathological factors and prognoses. Ninety-nine cases (20.5%) had positive margins that were judged when cancer cells existed within 5 mm from margin. In multivariate analysis of factors for surgical margin, EIC-comedo status, ly, located site, proliferative activity, and age were significant and independent factors. Regarding local recurrence, positive margin, age, ER and proliferative activity were significant factors in multivariate analysis, especially in cases not receiving postoperative radiation therapy. Radiation therapy may be beneficial for patients with positive surgical margin. And patients with breast recurrence alone had significantly higher survival rates. Therefore, it is suggested that surgical margin may not reflect survival, although it is a significant factor for local recurrence. (author)

  7. The global warming game - simulations of a CO2 reduction agreement

    International Nuclear Information System (INIS)

    Fankhauser, S.; Kverndokk, S.

    1992-06-01

    The paper analyses incentives for and the benefits of a possible international cooperation to reduce CO-2-emissions. The negotiations are modeled as a (static) reciprocal-externality-game in CO 2 -emissions between five world regions. CO 2 -emissions affect the players in two ways: First, each country's income depends (via energy inputs) on the amount of CO 2 emitted. On the other hand, emissions may cause future damage due to climate change. Without cooperation, each player maximizes its net benefits in setting marginal income equal to its marginal damage cost (Nash equilibrium). Under full cooperation marginal income equals the sum of the marginal damages (social optimum). The paper presents simulations of these two equilibria. Compared to the situation where no attention is paid to the greenhouse effect (the business as usual scenario), emission reductions under the Nash equilibrium can be interpreted as incentives for unilateral actions. According to the simulation results, this can only be expected from OECD countries. The results also imply that a socially optimal treaty, while clearly beneficial for the world in its entirety, may only be achieved if side payments are offered to at least China and the former Soviet Union, and probably the USA. The optimal global emission reductions in this study are on average lower than the reductions recommended by international conferences. 34 refs., 2 figs., 9 tabs

  8. Systematic Review of Studies Reporting Positive Surgical Margins After Bladder Neck Sparing Radical Prostatectomy.

    Science.gov (United States)

    Bellangino, Mariangela; Verrill, Clare; Leslie, Tom; Bell, Richard W; Hamdy, Freddie C; Lamb, Alastair D

    2017-11-07

    Bladder neck preservation (BNP) during radical prostatectomy (RP) has been proposed as a method to improve early recovery of urinary continence after radical prostatectomy. However, there is concern over a possible increase in the risk of positive surgical margins and prostate cancer recurrence rate. A recent systematic review and meta-analysis reported improved early recovery and overall long-term urinary continence without compromising oncologic control. The aim of our study was to perform a critical review of the literature to assess the impact on bladder neck and base margins after bladder neck sparing radical prostatectomy. We carried out a systematic review of the literature using Pubmed, Scopus and Cochrane library databases in May 2017 using medical subject headings and free-text protocol according to PRISMA guidelines. We used the following search terms: bladder neck preservation, prostate cancer, radical prostatectomy and surgical margins. Studies focusing on positive surgical margins (PSM) in bladder neck sparing RP pertinent to the objective of this review were included. Overall, we found 15 relevant studies reporting overall and site-specific positive surgical margins rate after bladder neck sparing radical prostatectomy. This included two RCTs, seven prospective comparative studies, two retrospective comparative studies and four case series. All studies were published between 1993 and 2015 with sample sizes ranging between 50 and 1067. Surgical approaches included open, laparoscopic and robot-assisted radical prostatectomy. The overall and base-specific PSM rates ranged between 7-36% and 0-16.3%, respectively. Mean base PSM was 4.9% in those patients where bladder neck sparing was performed, but only 1.85% in those without sparing. Bladder neck preservation during radical prostatectomy may increase base-positive margins. Further studies are needed to better investigate the impact of this technique on oncological outcomes. A future paradigm could

  9. Evaluation of motion management strategies based on required margins

    International Nuclear Information System (INIS)

    Sawkey, D; Svatos, M; Zankowski, C

    2012-01-01

    Strategies for delivering radiation to a moving lesion each require a margin to compensate for uncertainties in treatment. These motion margins have been determined here by separating the total uncertainty into components. Probability density functions for the individual sources of uncertainty were calculated for ten motion traces obtained from the literature. Motion margins required to compensate for the center of mass motion of the clinical treatment volume were found by convolving the individual sources of uncertainty. For measurements of position at a frequency of 33 Hz, system latency was the dominant source of positional uncertainty. Averaged over the ten motion traces, the motion margin for tracking with a latency of 200 ms was 4.6 mm. Gating with a duty cycle of 33% required a mean motion margin of 3.2–3.4 mm, and tracking with a latency of 100 ms required a motion margin of 3.1 mm. Feasible reductions in the effects of the sources of uncertainty, for example by using a simple prediction algorithm to anticipate the lesion position at the end of the latency period, resulted in a mean motion margin of 1.7 mm for tracking with a latency of 100 ms, 2.4 mm for tracking with a latency of 200 ms, and 2.1–2.2 mm for the gating strategies with duty cycles of 33%. A crossover tracking latency of 150 ms was found, below which tracking strategies could take advantage of narrower motion margins than gating strategies. The methods described here provide a means to guide selection of a motion management strategy for a given patient. (paper)

  10. Risk Factors Associated With Circumferential Resection Margin Positivity in Rectal Cancer: A Binational Registry Study.

    Science.gov (United States)

    Warrier, Satish K; Kong, Joseph Cherng; Guerra, Glen R; Chittleborough, Timothy J; Naik, Arun; Ramsay, Robert G; Lynch, A Craig; Heriot, Alexander G

    2018-04-01

    Rectal cancer outcomes have improved with the adoption of a multidisciplinary model of care. However, there is a spectrum of quality when viewed from a national perspective, as highlighted by the Consortium for Optimizing the Treatment of Rectal Cancer data on rectal cancer care in the United States. The aim of this study was to assess and identify predictors of circumferential resection margin involvement for rectal cancer across Australasia. A retrospective study from a prospectively maintained binational colorectal cancer database was interrogated. This study is based on a binational colorectal cancer audit database. Clinical information on all consecutive resected rectal cancer cases recorded in the registry from 2007 to 2016 was retrieved, collated, and analyzed. The primary outcome measure was positive circumferential resection margin, measured as a resection margin ≤1 mm. A total of 3367 patients were included, with 261 (7.5%) having a positive circumferential resection margin. After adjusting for hospital and surgeon volume, hierarchical logistic regression analysis identified a 6-variable model encompassing the independent predictors, including urgent operation, abdominoperineal resection, open technique, low rectal cancer, T3 to T4, and N1 to N2. The accuracy of the model was 92.3%, with an receiver operating characteristic of 0.783 (p risk associated with circumferential resection margin positivity ranged from risk factors) to 43% (6 risk factors). This study was limited by the lack of recorded long-term outcomes associated with circumferential resection margin positivity. The rate of circumferential resection margin involvement in patients undergoing rectal cancer resection in Australasia is low and is influenced by a number of factors. Risk stratification of outcome is important with the increasing demand for publicly accessible quality data. See Video Abstract at http://links.lww.com/DCR/A512.

  11. Prostate cancer treated with image-guided helical TomoTherapy {sup registered} and image-guided LINAC-IMRT. Correlation between high-dose bladder volume, margin reduction, and genitourinary toxicity

    Energy Technology Data Exchange (ETDEWEB)

    Drozdz, Sonia; Wendt, Thomas G. [University Hospital Jena, Friedrich-Schiller-University Jena, Department of Radiation Oncology, Jena (Germany); Schwedas, Michael; Salz, Henning [University Hospital Jena, Friedrich-Schiller-University Jena, Department of Radiation Oncology, Section of Medical Physics, Jena (Germany); Foller, Susan [University Hospital Jena, Friedrich-Schiller-University Jena, Department of Urology, Jena (Germany)

    2016-04-15

    We compared different image-guidance (IG) strategies for prostate cancer with high-precision IG intensity-modulated radiation therapy (IMRT) using TomoTherapy {sup registered} (Accuray Inc., Madison, WI, USA) and linear accelerator (LINAC)-IMRT and their impact on planning target volume (PTV) margin reduction. Follow-up data showed reduced bladder toxicity in TomoTherapy patients compared to LINAC-IMRT. The purpose of this study was to quantify whether the treatment delivery technique and decreased margins affect reductions in bladder toxicity. Setup corrections from 30 patients treated with helical TomoTherapy and 30 treated with a LINAC were analyzed. These data were used to simulate three IG protocols based on setup error correction and a limited number of imaging sessions. For all patients, gastrointestinal (GI) and genitourinary (GU) toxicity was documented and correlated with the treatment delivery technique. For fiducial marker (FM)-based RT, a margin reduction of up to 3.1, 3.0, and 4.8 mm in the left-right (LR), superior-inferior (SI), and anterior-posterior (AP) directions, respectively, could be achieved with calculation of a setup correction from the first three fractions and IG every second day. Although the bladder volume was treated with mean doses of 35 Gy in the TomoTherapy group vs. 22 Gy in the LINAC group, we observed less GU toxicity after TomoTherapy. Intraprostate FMs allow for small safety margins, help decrease imaging frequency after setup correction, and minimize the dose to bladder and rectum, resulting in lower GU toxicity. In addition, IMRT delivered with TomoTherapy helps to avoid hotspots in the bladder neck, a critical anatomic structure associated with post-RT urinary toxicity. (orig.) [German] Wir haben im Rahmen der Prostatakarzinombehandlung verschiedene bildgefuehrte (IG) Strategien der hochpraezisen intensitaetsmodulierten Radiotherapie (IMRT) unter Einsatz der Tomotherapie (TomoTherapy {sup registered}, Accuray Inc., Madison

  12. [Economic development and married women's employment in Taiwan: a study of female marginalization].

    Science.gov (United States)

    Lu, Y

    1994-07-01

    As in other developing countries, the industrial development in Taiwan seems to marginalize female workers. This study tries to examine the trend of women's employment status, using both macro- and micro-level data. The statistics suggest that female employment had significantly declined during the early stages of industrialization. Although rapid economic development has expanded women's job opportunities, most women are concentrated in lower-status jobs and the informal sector. Informal employment is especially prevalent among married women. In the micro-level analysis the study examines the factors that led to the marginalization of women's labor force. The empirical analysis applies a multinomial logistic model to a 1980 KAP (knowledge, attitude, and practice) survey sample of 3859 married women. The results suggest that married women's work patterns in terms of formal vs. informal employment are determined by the family organization rather than by labor market conditions. Wives from families with small businesses are more likely to be involved in informal employment. Wives also tend to work informally when they have young children. On the other hand, the effects of labor market conditions are mediated by the types of family economy. Therefore the women's informal employment in Taiwan, as a characteristic of female marginalization, is the result of the sexual division of labor in the family organization and the prevalence of the family business, rather than that of being excluded into the marginal forms of employment through the process of capitalistic production, as argued by the female marginalization theorists.

  13. Semisupervised kernel marginal Fisher analysis for face recognition.

    Science.gov (United States)

    Wang, Ziqiang; Sun, Xia; Sun, Lijun; Huang, Yuchun

    2013-01-01

    Dimensionality reduction is a key problem in face recognition due to the high-dimensionality of face image. To effectively cope with this problem, a novel dimensionality reduction algorithm called semisupervised kernel marginal Fisher analysis (SKMFA) for face recognition is proposed in this paper. SKMFA can make use of both labelled and unlabeled samples to learn the projection matrix for nonlinear dimensionality reduction. Meanwhile, it can successfully avoid the singularity problem by not calculating the matrix inverse. In addition, in order to make the nonlinear structure captured by the data-dependent kernel consistent with the intrinsic manifold structure, a manifold adaptive nonparameter kernel is incorporated into the learning process of SKMFA. Experimental results on three face image databases demonstrate the effectiveness of our proposed algorithm.

  14. Marginal abatement cost and carbon reduction potential outlook of key energy efficiency technologies in China's building sector to 2030

    International Nuclear Information System (INIS)

    Xiao, He; Wei, Qingpeng; Wang, Hailin

    2014-01-01

    China achieved an energy savings of 67.5 Mtce in the building sector at the end of the 11th Five-Year Plan and set a new target of 116 Mtce by the end of the 12th Five-Year Plan. In this paper, an improved bottom-up model is developed to assess the carbon abatement potential and marginal abatement cost (MAC) of 34 selected energy-saving technologies/measures for China's building sector. The total reduction potential is 499.8 million t-CO 2 by 2030. 4.8 Gt-CO 2 potential will be achieved cumulatively to 2030. By 2030, total primary energy consumption of Chinese building sector will rise continuously to 1343 Mtce in the reference scenario and 1114 Mtce in the carbon reduction scenario. Total carbon dioxide emission will rise to 2.39 Gt-CO 2 and 1.9 Gt-CO 2 in two scenarios separately. The average carbon abatement cost of the aforementioned technologies is 19.5 $/t-CO 2 . The analysis reveals that strengthening successfully energy-saving technologies is important, especially for the residential building sector. The central government's direct investments in such technologies should be reduced without imposing significant negative effects. - Highlights: • MAC of 34 energy-saving technologies of China's building sector is calculated. • Energy use and CO 2 emission of China's building sector by 2030 is forecasted. • The reference and the carbon reduction scenarios are compared

  15. The global warming game - simulations of a CO[sub 2] reduction agreement

    Energy Technology Data Exchange (ETDEWEB)

    Fankhauser, S [Centre for Social and Economic Research on the Global Environment, London (United Kingdom); Kverndokk, S [Stiftelsen for Samfunns- og Naeringslivsforskning, Oslo (Norway)

    1992-06-01

    The paper analyses incentives for and the benefits of a possible international cooperation to reduce CO-2-emissions. The negotiations are modeled as a (static) reciprocal-externality-game in CO[sub 2]-emissions between five world regions. CO[sub 2]-emissions affect the players in two ways: First, each country's income depends (via energy inputs) on the amount of CO[sub 2] emitted. On the other hand, emissions may cause future damage due to climate change. Without cooperation, each player maximizes its net benefits in setting marginal income equal to its marginal damage cost (Nash equilibrium). Under full cooperation marginal income equals the sum of the marginal damages (social optimum). The paper presents simulations of these two equilibria. Compared to the situation where no attention is paid to the greenhouse effect (the business as usual scenario), emission reductions under the Nash equilibrium can be interpreted as incentives for unilateral actions. According to the simulation results, this can only be expected from OECD countries. The results also imply that a socially optimal treaty, while clearly beneficial for the world in its entirety, may only be achieved if side payments are offered to at least China and the former Soviet Union, and probably the USA. The optimal global emission reductions in this study are on average lower than the reductions recommended by international conferences. 34 refs., 2 figs., 9 tabs.

  16. Developmental Advising for Marginalized Community College Students: An Action Research Study

    Science.gov (United States)

    Jones, Terrica S.

    2013-01-01

    The purpose of this action research study was to understand, evaluate, and improve the developmental advising practices used at a Washington State community college. This action research study endeavored to strengthen the developmental advising model originally designed to support the college's marginalized students. Guiding questions for the…

  17. Characterizing Convexity of Games using Marginal Vectors

    NARCIS (Netherlands)

    van Velzen, S.; Hamers, H.J.M.; Norde, H.W.

    2003-01-01

    In this paper we study the relation between convexity of TU games and marginal vectors.We show that if specfic marginal vectors are core elements, then the game is convex.We characterize sets of marginal vectors satisfying this property, and we derive the formula for the minimum number of marginal

  18. MARGINS: Toward a novel science plan

    Science.gov (United States)

    Mutter, John C.

    A science plan to study continental margins has been in the works for the past 3 years, with almost 200 Earth scientists from a wide variety of disciplines gathering at meetings and workshops. Most geological hazards and resources are found at continental margins, yet our understanding of the processes that shape the margins is meager.In formulating this MARGINS research initiative, fundamental issues concerning our understanding of basic Earth-forming processes have arisen. It is clear that a business-as-usual approach will not solve the class of problems defined by the MARGINS program; the solutions demand approaches different from those used in the past. In many cases, a different class of experiment will be required, one that is well beyond the capability of individual principle investigators to undertake on their own. In most cases, broadly based interdisciplinary studies will be needed.

  19. Cervical and incisal marginal discrepancy in ceramic laminate veneering materials: A SEM analysis

    Directory of Open Access Journals (Sweden)

    Hemalatha Ranganathan

    2017-01-01

    Full Text Available Context: Marginal discrepancy influenced by the choice of processing material used for the ceramic laminate veneers needs to be explored further for better clinical application. Aims: This study aimed to evaluate the amount of cervical and incisal marginal discrepancy associated with different ceramic laminate veneering materials. Settings and Design: This was an experimental, single-blinded, in vitro trial. Subjects and Methods: Ten central incisors were prepared for laminate veneers with 2 mm uniform reduction and heavy chamfer finish line. Ceramic laminate veneers fabricated over the prepared teeth using four different processing materials were categorized into four groups as Group I - aluminous porcelain veneers, Group II - lithium disilicate ceramic veneers, Group III - lithium disilicate-leucite-based veneers, Group IV - zirconia-based ceramic veneers. The cervical and incisal marginal discrepancy was measured using a scanning electron microscope. Statistical Analysis Used: ANOVA and post hoc Tukey honest significant difference (HSD tests were used for statistical analysis. Results: The cervical and incisal marginal discrepancy for four groups was Group I - 114.6 ± 4.3 μm, 132.5 ± 6.5 μm, Group II - 86.1 ± 6.3 μm, 105.4 ± 5.3 μm, Group III - 71.4 ± 4.4 μm, 91.3 ± 4.7 μm, and Group IV - 123.1 ± 4.1 μm, 142.0 ± 5.4 μm. ANOVA and post hoc Tukey HSD tests observed a statistically significant difference between the four test specimens with regard to cervical marginal discrepancy. The cervical and incisal marginal discrepancy scored F = 243.408, P < 0.001 and F = 180.844, P < 0.001, respectively. Conclusion: This study concluded veneers fabricated using leucite reinforced lithium disilicate exhibited the least marginal discrepancy followed by lithium disilicate ceramic, aluminous porcelain, and zirconia-based ceramics. The marginal discrepancy was more in the incisal region than in the cervical region in all the groups.

  20. A Solvable Dynamic Principal-Agent Model with Linear Marginal Productivity

    Directory of Open Access Journals (Sweden)

    Bing Liu

    2018-01-01

    Full Text Available We study how to design an optimal contract which provides incentives for agent to put forth the desired effort in a continuous time dynamic moral hazard model with linear marginal productivity. Using exponential utility and linear production, three different information structures, full information, hidden actions and hidden savings, are considered in the principal-agent model. Applying the stochastic maximum principle, we solve the model explicitly, where the agent’s optimization problem becomes the principal’s problem of choosing an optimal contract. The explicit solutions to our model allow us to analyze the distortion of allocations. The main effect of hidden actions is a reduction of effort, but the a smaller effect is on the consumption allocation. In the hidden saving case, the consumption distortion almost vanishes but the effort distortion is expanded. In our setting, the agent’s optimal effort is also reduced with the decline of marginal productivity.

  1. Marginal abatement cost curves and the optimal timing of mitigation measures

    International Nuclear Information System (INIS)

    Vogt-Schilb, Adrien; Hallegatte, Stéphane

    2014-01-01

    Decision makers facing abatement targets need to decide which abatement measures to implement, and in which order. Measure-explicit marginal abatement cost curves depict the cost and abating potential of available mitigation options. Using a simple intertemporal optimization model, we demonstrate why this information is not sufficient to design emission reduction strategies. Because the measures required to achieve ambitious emission reductions cannot be implemented overnight, the optimal strategy to reach a short-term target depends on longer-term targets. For instance, the best strategy to achieve European's −20% by 2020 target may be to implement some expensive, high-potential, and long-to-implement options required to meet the −75% by 2050 target. Using just the cheapest abatement options to reach the 2020 target can create a carbon-intensive lock-in and make the 2050 target too expensive to reach. Designing mitigation policies requires information on the speed at which various measures to curb greenhouse gas emissions can be implemented, in addition to the information on the costs and potential of such measures provided by marginal abatement cost curves. - Highlights: • Classification of existing Marginal Abatement Cost Curves (MACC). • MACCs do not provide separated data on the speed at which measures can be implemented. • Optimal measures to reach a short-term target depend on longer-term targets. • Unique carbon price or aggregated emission-reduction target may be insufficient. • Room for short-term sectoral policies if agents are myopic or governments cannot commit

  2. Professional Commitment and Professional Marginalism in Teachers

    Directory of Open Access Journals (Sweden)

    Kalashnikov A.I.

    2017-11-01

    Full Text Available The article reviews teachers' attitudes towards the teaching profession which can be expressed both in professional commitment and in professional marginalism. The dominance of professional marginalism could affect destructively the students as well as the teacher’s personality, hence the issues related to the content of personal position of a marginal and the rate of marginalism among teachers. It was suggested that marginalism could be revealed in the study of professional commitment. The study involved 81 teachers of Sverdlovsk secondary schools aged 21—60 years with work experience ranging from 1 month to 39 years. The Professional Commitment Questionnaire was used as the study technique. The results showed that negative emotional attitude towards the profession and reluctance to leave the profession were grouped as a separate factor. The dispersion factor was 12,5%. The factor loadings ranged from 0.42 to 0.84. The study proved that professional marginalism in teachers includes dissatisfaction with work, feelings of resentment against profession and an unwillingness to leave the profession.

  3. HEDONIC VALUATION OF MARGINAL WILLINGNESS TO PAY FOR AIR QUALITY IMPROVEMENT

    Directory of Open Access Journals (Sweden)

    Endah Saptutyningsih

    2014-10-01

    Full Text Available AbstractThis study aims to identify the highest air pollution areas and to estimate household marginal willingness to pay for air quality improvement. The result of Kriging technique indicates that six sub districts in Yogyakarta City and one sub district in Gunungkidul have highest concentration of particle pollution (PM10. The result of hedonic price method conclude that by adopting a two-stage estimation procedure an 1% increase in the level of PM10 reduced property prices in the study area by 0.32%. Marginal implicit price for reducing PM10 is Rp 957,900.00. The households are willing to pay an additional amount of 1.34 percent for a reduction in PM10 by 1%.Keywords: Air pollution, marginal willingness to pay, hedonic price, implicit priceJEL classification numbers: D12, Q53AbstrakPenelitian ini bertujuan mengidentifikasi daerah polusi udara tertinggi dan untuk memperkirakan kesediaan marginal rumah tangga untuk membayar untuk perbaikan kualitas udara. Dengan menggunakan teknik Kriging, hasil penelitian menunjukkan bahwa enam kecamatan di Kota Yogyakarta dan satu kecamatan di Gunungkidul memiliki konsentrasi tertinggi partikel polusi (PM10. Sementara itu, dengan metode harga hedonik yang mengadopsi prosedur dua tahap, paper ini menyimpulkan bahwa setiap peningkatan PM10 sebesar 1% akan menurunkan harga properti di daerah penelitian sebesar 0.32 persen. Harga implisit marjinal untuk mengurangi PM10 adalah Rp 957,900. Rumah tangga bersedia membayar tambahan 1,34 persen untuk pengurangan PM10 sebesar 1%.Kata kunci: Polusi udara, keinginan membayar marjinal, harga hedonik, SIG, harga implisitJEL classification numbers: D12, Q53

  4. SU-E-T-406: Online Image-Guidance for Prostate SBRT: Dosimetric Benefits and Margin Analysis.

    Science.gov (United States)

    Li, T; Yuan, L; Lee, W; Yin, F; Wu, Q J

    2012-06-01

    To evaluate the dosimetric benefits of online image guidance during prostate stereotactic body radiotherapy (SBRT) and the potential on margin reduction. 28 prostate SBRT patients were retrospectively studied, each treated with 37Gy in 5 fractions. RTOG recently opened a similar protocol (0938). During treatments, per-beam couch corrections were made based on the actual target motion provided by dynamic tracking with either Calypso or per-beam OBI imaging. Dosimetric benefits of online correction were evaluated by comparing delivered dose distributions with and without such correction. The dose distribution without correction was generated in the same treatment planning system by accumulating doses without online correction from the each beam and each fraction. Quantitative analyses include the dosimetric difference between delivered doses with and without correction; the correction magnitude and frequency; and the potential on margin reduction based on the margin recipe by Van Herk et al. (1) Delivery without online correction results in small reduction on target mean dose (0.03±0.05Gy), maximal dose (0.01±0.06Gy), and conformity index (<0.06). (2) Delivery without online correction has small impact on OAR dose: 26 out of 28 patients have <1%/1.5cc differences in V18.5Gy/V24Gy/V28Gy/V33Gy/V37Gy for both the bladder and the rectum. Maximal differences are 4cc of the bladder and 1.6cc of the rectum in mid-dose regions (V18.5Gy). (3) For femoral heads, <1cc/1Gy differences are observed in V20Gy/Dmean/D1cc.(4) Average number of couch corrections per fraction is 0.49. The magnitudes are: (-0.2±2)mm vertically, (-0.1±2.1)mm longitudinally, and (-0.2±1.4)mm laterally. (5) Margin determined by actual target motion in this patient population is 2.5mm isotropic. For both target coverage and OAR sparing, overall small benefit is seen from per-beam couch correction under dynamic tracking. The target motion between beams is small and random, and indicates a population

  5. Matthew and marginality

    Directory of Open Access Journals (Sweden)

    Denis C. Duling

    1995-12-01

    Full Text Available This article explores marginality theory as it was first proposed in  the social sciences, that is related to persons caught between two competing cultures (Park; Stonequist, and, then, as it was developed in sociology as related to the poor (Germani and in anthropology as it was related to involuntary marginality and voluntary marginality (Victor Turner. It then examines a (normative scheme' in antiquity that creates involuntary marginality at the macrosocial level, namely, Lenski's social stratification model in an agrarian society, and indicates how Matthean language might fit with a sample inventory  of socioreligious roles. Next, it examines some (normative schemes' in  antiquity for voluntary margi-nality at the microsocial level, namely, groups, and examines how the Matthean gospel would fit based on indications of factions and leaders. The article ,shows that the author of the Gospel of Matthew has an ideology of (voluntary marginality', but his gospel includes some hope for (involuntary  marginals' in  the  real world, though it is somewhat tempered. It also suggests that the writer of the Gospel is a (marginal man', especially in the sense defined by the early theorists (Park; Stone-quist.

  6. Influence of different cusp coverage methods for the extension of ceramic inlays on marginal integrity and enamel crack formation in vitro.

    Science.gov (United States)

    Krifka, Stephanie; Stangl, Martin; Wiesbauer, Sarah; Hiller, Karl-Anton; Schmalz, Gottfried; Federlin, Marianne

    2009-09-01

    No information is available to date about cusp design of thin (1.0 mm) non-functional cusps and its influence upon (1) marginal integrity of ceramic inlays (CI) and partial ceramic crowns (PCC) and (2) crack formation of dental tissues. The aim of this in vitro study was to investigate the effect of cusp coverage of thin non-functional cusps on marginal integrity and enamel crack formation. CI and PCC preparations were performed on extracted human molars. Non-functional cusps were adjusted to 1.0-mm wall thickness and 1.0-mm wall thickness with horizontal reduction of about 2.0 mm. Ceramic restorations (Vita Mark II, Cerec3 System) were adhesively luted with Excite/Variolink II. The specimens were exposed to thermocycling and central mechanical loading. Marginal integrity was assessed by evaluating dye penetration after thermal cycling and mechanical loading. Enamel cracks were documented under a reflective-light microscope. The data were statistically analysed with the Mann-Whitney U test, the Fishers exact test (alpha = 0.05) and the error rates method. PCC with horizontal reduction of non-functional cusps showed statistically significant less microleakage than PCC without such a cusp coverage. Preparation designs with horizontal reduction of non-functional cusps showed a tendency to less enamel crack formation than preparation designs without cusp coverage. Thin non-functional cusp walls of adhesively bonded restorations should be completely covered or reduced to avoid enamel cracks and marginal deficiency.

  7. Switchgrass-Based Bioethanol Productivity and Potential Environmental Impact from Marginal Lands in China

    Directory of Open Access Journals (Sweden)

    Xun Zhang

    2017-02-01

    Full Text Available Switchgrass displays an excellent potential to serve as a non-food bioenergy feedstock for bioethanol production in China due to its high potential yield on marginal lands. However, few studies have been conducted on the spatial distribution of switchgrass-based bioethanol production potential in China. This study created a land surface process model (Environmental Policy Integrated Climate GIS (Geographic Information System-based (GEPIC model coupled with a life cycle analysis (LCA to explore the spatial distribution of potential bioethanol production and present a comprehensive analysis of energy efficiency and environmental impacts throughout its whole life cycle. It provides a new approach to study the bioethanol productivity and potential environmental impact from marginal lands based on the high spatial resolution GIS data, and this applies not only to China, but also to other regions and to other types of energy plant. The results indicate that approximately 59 million ha of marginal land in China are suitable for planting switchgrass, and 22 million tons of ethanol can be produced from this land. Additionally, a potential net energy gain (NEG of 1.75 x 106 million MJ will be achieved if all of the marginal land can be used in China, and Yunnan Province offers the most significant one that accounts for 35% of the total. Finally, this study obtained that the total environmental effect index of switchgrass-based bioethanol is the equivalent of a population of approximately 20,300, and a reduction in the global warming potential (GWP is the most significant environmental impact.

  8. Safety margin improvement by adopting the feature of interleaving in 700 MWe PHWR

    International Nuclear Information System (INIS)

    Kumar, Nrependra; Yadav, S.K.; Khan, T.A.; Dixit, A.; Singhal, Mukesh; Nair, Suma R.

    2015-01-01

    Indian Pressurised Heavy Water Reactors (IPHWRs) of 700 MWe are under construction at Kakrapar Atomic Power Project -3,4 and Rajasthan Atomic Power Project-7,8. These units have enhanced safety features with respect to standard IPHWRs. One of the enhanced features is interleaving of feeders/channels. In interleaved feeder configuration, each header located at either end of reactor gets connected to one quarter of core channels, which are uniformly distributed. The core is divided into two loops with feeder connected in interleaved fashioned. In this paper a comparative study has been performed between the two cases: 1) The core splits in two vertical halves and each vertical half is a loop of PHT (TAPS-3 and 4 Type configuration). 2) The core is divided into two loops with feeders/ channels connected in interleaved fashioned (700 MWe Configuration). LOCA studies have been performed for 700 MWe PHWR considering interleaving of feeders configuration using in-house developed computer code ATMIKA and 3-D neutron kinetics code IQS-3D. The issue of interleaving is closely linked to an inherent reactivity characteristic of PHWR reactors (viz., positive void reactivity coefficient) which leads to a power increase following a Large LOCA. In 700 MWe PHWR with intent to improve the safety margin, adopted the feature of interleaving of feeders which causes in reduction in the magnitude of void coefficient and results in reduction of peak power during LBLOCA. The systematic LBLOCA study demonstrates that interleaved configuration of feeder/channels of two loops has higher safety margins (i.e. with respect to peak power, prompt-criticality margin, adiabatic heat deposition on the fuel pins, sheath temperature excursion and clad oxidation) with regard to the effectiveness of shutdown system. (author)

  9. Enabling the participation of marginalized populations: case studies from a health service organization in Ontario, Canada.

    Science.gov (United States)

    Montesanti, Stephanie R; Abelson, Julia; Lavis, John N; Dunn, James R

    2017-08-01

    We examined efforts to engage marginalized populations in Ontario Community Health Centers (CHCs), which are primary health care organizations serving 74 high-risk communities. Qualitative case studies of community participation in four Ontario CHCs were carried out through key informant interviews with CHC staff to identify: (i) the approaches, strategies and methods used in participation initiatives aimed specifically at engaging marginalized populations in the planning of and decision making for health services; and (ii) the challenges and enablers for engaging these populations. The marginalized populations involved in the community participation initiatives studied included Low-German Speaking Mennonites in a rural town, newcomer immigrants and refugees in an urban downtown city, immigrant and francophone seniors in an inner city and refugee women in an inner city. Our analysis revealed that enabling the participation of marginalized populations requires CHCs to attend to the barriers experienced by marginalized populations that constrain their participation. Key informants outlined the features of a 'community development approach' that they rely on to address the barriers to marginalized peoples' involvement by strengthening their skills, abilities and leadership in capacity-building activities. The community development approach also shaped the participation methods that were used in the engagement process of CHCs. However, key informants also described the challenges of applying this approach, influenced by the cultural values of some groups, which shaped their willingness and motivation to participate. This study provides further insight into the approach, strategies and methods used in the engagement process to enable the participation of marginalized populations, which may be transferable to other health services settings. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  10. [Resection margins in conservative breast cancer surgery].

    Science.gov (United States)

    Medina Fernández, Francisco Javier; Ayllón Terán, María Dolores; Lombardo Galera, María Sagrario; Rioja Torres, Pilar; Bascuñana Estudillo, Guillermo; Rufián Peña, Sebastián

    2013-01-01

    Conservative breast cancer surgery is facing a new problem: the potential tumour involvement of resection margins. This eventuality has been closely and negatively associated with disease-free survival. Various factors may influence the likelihood of margins being affected, mostly related to the characteristics of the tumour, patient or surgical technique. In the last decade, many studies have attempted to find predictive factors for margin involvement. However, it is currently the new techniques used in the study of margins and tumour localisation that are significantly reducing reoperations in conservative breast cancer surgery. Copyright © 2012 AEC. Published by Elsevier Espana. All rights reserved.

  11. Assessment of seismic margin calculation methods

    International Nuclear Information System (INIS)

    Kennedy, R.P.; Murray, R.C.; Ravindra, M.K.; Reed, J.W.; Stevenson, J.D.

    1989-03-01

    Seismic margin review of nuclear power plants requires that the High Confidence of Low Probability of Failure (HCLPF) capacity be calculated for certain components. The candidate methods for calculating the HCLPF capacity as recommended by the Expert Panel on Quantification of Seismic Margins are the Conservative Deterministic Failure Margin (CDFM) method and the Fragility Analysis (FA) method. The present study evaluated these two methods using some representative components in order to provide further guidance in conducting seismic margin reviews. It is concluded that either of the two methods could be used for calculating HCLPF capacities. 21 refs., 9 figs., 6 tabs

  12. Energy structure, marginal efficiency and substitution rate: An empirical study of China

    International Nuclear Information System (INIS)

    Han Zhiyong; Fan Ying; Jiao Jianling; Yan Jisheng; Wei Yiming

    2007-01-01

    Energy efficiency is an important factor in developing energy policies as it represents the extent to which resources support economic output. In recent literature, relevant studies have mainly focused on aggregate energy efficiency, but rarely touched on the marginal efficiency of diverse energy resources and their comparative substitution rate. During 1978-2003, China's energy efficiency continually increased; and consequently became a hot topic in contemporary literature. However, there is no empirical study on the relationship between energy structure and energy efficiency. In order to close the gap, this paper reports the empirical study of the impact of China's energy structure on its energy efficiency from 1978 to 2003. The work covered primary estimation of the marginal efficiency of coal and petroleum in China, as well as the comparative substitution rate. Results indicate that the substitution rate between petroleum and coal is a factor of 5.38

  13. Informing practice regarding marginalization: the application of the Koci Marginality Index.

    Science.gov (United States)

    Koci, Anne Floyd; McFarlane, Judith; Nava, Angeles; Gilroy, Heidi; Maddoux, John

    2012-12-01

    The 49th World Health Assembly of the World Health Organization (WHO) declared violence as the leading worldwide public health problem with a focus on the increase in the incidence of injuries to women. Violence against women is an international epidemic with specific instruments required to measure the impact on women's functioning. This article describes the application of the Koci Marginality Index (KMI), a 5-item scale to measure marginality, to the baseline data of a seven-year prospective study of 300 abused women: 150 first time users of a shelter and 150 first time applicants for a protection order from the justice system. Validity and reliability of the Koci Marginality Index and its usefulness for best clinical practice and for policy decisions for abused women's health are discussed. The 49th World Health Assembly of the World Health Organization (WHO) declared violence as the leading worldwide public health problem and focused on the increase in the incidence of injuries to women (Krug et al., 2002 ). Violence against women in the form of intimate partner violence (IPV) is costly in terms of dollars and health. In the United States in 2003, estimated costs of IPV approached $8.3 billion (Centers for Disease Control and Prevention [CDC], 2011). Outcomes related to severity of IPV vary but in 2003 victims suffering severe IPV lost nearly 8 million days of paid work, and greater than 5 million days of household productivity annually (CDC, 2011). Besides the evident financial cost of IPV, research confirms that exposure to IPV impacts a woman's health immediately and in the long-term (Breiding, Black, & Ryan, 2008 ; Campbell, 2002 ; CDC, 2011). Such sequela adversely affect the health of women and may increase their marginalization, a concept akin to isolation that may further increase negative effects on health outcomes. Immigrant women are at high risk for IPV (Erez, 2002 ) and those without documentation are at higher risk for marginalization (Montalvo

  14. Analysis and study on core power capability with margin method

    International Nuclear Information System (INIS)

    Liu Tongxian; Wu Lei; Yu Yingrui; Zhou Jinman

    2015-01-01

    Core power capability analysis focuses on the power distribution control of reactor within the given mode of operation, for the purpose of defining the allowed normal operating space so that Condition Ⅰ maneuvering flexibility is maintained and Condition Ⅱ occurrences are adequately protected by the reactor protection system. For the traditional core power capability analysis methods, such as synthesis method or advanced three dimension method, usually calculate the key safety parameters of the power distribution, and then verify that these parameters meet the design criteria. For PWR with on-line power distribution monitoring system, core power capability analysis calculates the most power level which just meets the design criteria. On the base of 3D FAC method of Westinghouse, the calculation model of core power capability analysis with margin method is introduced to provide reference for engineers. The core power capability analysis of specific burnup of Sanmen NPP is performed with the margin method. The results demonstrate the rationality of the margin method. The calculation model of the margin method not only helps engineers to master the core power capability analysis for AP1000, but also provides reference for engineers for core power capability analysis of other PWR with on-line power distribution monitoring system. (authors)

  15. Reduction of Dose Delivered to Organs at Risk in Prostate Cancer Patients via Image-Guided Radiation Therapy

    International Nuclear Information System (INIS)

    Pawlowski, Jason M.; Yang, Eddy S.; Malcolm, Arnold W.; Coffey, Charles W.; Ding, George X.

    2010-01-01

    Purpose: To determine whether image guidance can improve the dose delivered to target organs and organs at risk (OARs) for prostate cancer patients treated with intensity-modulated radiotherapy (IMRT). Methods and Materials: Eight prostate cancer patients were treated with IMRT to 76 Gy at 2 Gy per fraction. Daily target localization was performed via alignment of three intraprostatic fiducials and weekly kV-cone beam computed tomography (CBCT) scans. The prostate and OARs were manually contoured on each CBCT by a single physician. Daily patient setup shifts were obtained by comparing alignment of skin tattoos with the treatment position based on fiducials. Treatment fields were retrospectively applied to CBCT scans. The dose distributions were calculated using actual treatment plans (an 8-mm PTV margin everywhere except for 6-mm posteriorly) with and without image guidance shifts. Furthermore, the feasibility of margin reduction was evaluated by reducing planning margins to 4 mm everywhere except for 3 mm posteriorly. Results: For the eight treatment plans on the 56 CBCT scans, the average doses to 98% of the prostate (D98) were 102% (range, 99-104%) and 99% (range, 45-104%) with and without image guidance, respectively. Using margin reduction, the average D98s were 100% (range, 84-104%) and 92% (range, 40-104%) with and without image guidance, respectively. Conclusions: Currently, margins used in IMRT plans are adequate to deliver a dose to the prostate with conventional patient positioning using skin tattoos or bony anatomy. The use of image guidance may facilitate significant reduction of planning margins. Future studies to assess the efficacy of decreasing margins and improvement of treatment-related toxicities are warranted.

  16. Mental Depreciation and Marginal Decision Making

    Science.gov (United States)

    Heath; Fennema

    1996-11-01

    We propose that individuals practice "mental depreciation," that is, they implicitly spread the fixed costs of their expenses over time or use. Two studies explore how people spread fixed costs on durable goods. A third study shows that depreciation can lead to two distinct errors in marginal decisions: First, people sometimes invest too much effort to get their money's worth from an expense (e.g., they may use a product a lot to spread the fixed expense across more uses). Second, people sometimes invest too little effort to get their money's worth: When people add a portion of the fixed cost to the current costs, their perceived marginal (i.e., incremental) costs exceed their true marginal costs. In response, they may stop investing because their perceived costs surpass the marginal benefits they are receiving. The latter effect is supported by two field studies that explore real board plan decisions by university students.

  17. Extensive management of field margins enhances their potential for off-site soil erosion mitigation.

    Science.gov (United States)

    Ali, Hamada E; Reineking, Björn

    2016-03-15

    Soil erosion is a widespread problem in agricultural landscapes, particularly in regions with strong rainfall events. Vegetated field margins can mitigate negative impacts of soil erosion off-site by trapping eroded material. Here we analyse how local management affects the trapping capacity of field margins in a monsoon region of South Korea, contrasting intensively and extensively managed field margins on both steep and shallow slopes. Prior to the beginning of monsoon season, we equipped a total of 12 sites representing three replicates for each of four different types of field margins ("intensive managed flat", "intensive managed steep", "extensive managed flat" and "extensive managed steep") with Astroturf mats. The mats (n = 15/site) were placed before, within and after the field margin. Sediment was collected after each rain event until the end of the monsoon season. The effect of management and slope on sediment trapping was analysed using linear mixed effects models, using as response variable either the sediment collected within the field margin or the difference in sediment collected after and before the field margin. There was no difference in the amount of sediment reaching the different field margin types. In contrast, extensively managed field margins showed a large reduction in collected sediment before and after the field margins. This effect was pronounced in steep field margins, and increased with the size of rainfall events. We conclude that a field margin management promoting a dense vegetation cover is a key to mitigating negative off-site effects of soil erosion in monsoon regions, particularly in field margins with steep slopes. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Sulfate reduction and methane oxidation activity below the sulfate-methane transition zone in Alaskan Beaufort Sea continental margin sediments: Implications for deep sulfur cycling

    Science.gov (United States)

    Treude, Tina; Krause, Stefan; Maltby, Johanna; Dale, Andrew W.; Coffin, Richard; Hamdan, Leila J.

    2014-11-01

    Two ∼6 m long sediment cores were collected along the ∼300 m isobath on the Alaskan Beaufort Sea continental margin. Both cores showed distinct sulfate-methane transition zones (SMTZ) at 105 and 120 cm below seafloor (cmbsf). Sulfate was not completely depleted below the SMTZ but remained between 30 and 500 μM. Sulfate reduction and anaerobic oxidation of methane (AOM) determined by radiotracer incubations were active throughout the methanogenic zone. Although a mass balance could not explain the source of sulfate below the SMTZ, geochemical profiles and correlation network analyses of biotic and abiotic data suggest a cryptic sulfur cycle involving iron, manganese and barite. Inhibition experiments with molybdate and 2-bromoethanesulfonate (BES) indicated decoupling of sulfate reduction and AOM and competition between sulfate reducers and methanogens for substrates. While correlation network analyses predicted coupling of AOM to iron reduction, the addition of manganese or iron did not stimulate AOM. Since none of the classical archaeal anaerobic methanotrophs (ANME) were abundant, the involvement of unknown or unconventional phylotypes in AOM is conceivable. The resistance of AOM activity to inhibitors implies deviation from conventional enzymatic pathways. This work suggests that the classical redox cascade of electron acceptor utilization based on Gibbs energy yields does not always hold in diffusion-dominated systems, and instead biotic processes may be more strongly coupled to mineralogy.

  19. Methylation patterns in marginal zone lymphoma.

    Science.gov (United States)

    Arribas, Alberto J; Bertoni, Francesco

    Promoter DNA methylation is a major regulator of gene expression and transcription. The identification of methylation changes is important for understanding disease pathogenesis, for identifying prognostic markers and can drive novel therapeutic approaches. In this review we summarize the current knowledge regarding DNA methylation in MALT lymphoma, splenic marginal zone lymphoma, nodal marginal zone lymphoma. Despite important differences in the study design for different publications and the existence of a sole large and genome-wide methylation study for splenic marginal zone lymphoma, it is clear that DNA methylation plays an important role in marginal zone lymphomas, in which it contributes to the inactivation of tumor suppressors but also to the expression of genes sustaining tumor cell survival and proliferation. Existing preclinical data provide the rationale to target the methylation machinery in these disorders. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. The availability and economic analyses of using marginal land for bioenergy production in China

    Science.gov (United States)

    Yuqi, Chen; Xudong, Guo; Chunyan, Lv

    2017-04-01

    In recent years, China has witnessed rapid increase in the dependence of foreign oil import. In 2015, the primary energy consumption of China is 543 million tons, of which 328 million tons was imported. The total amount of imported foreign oil increased from 49.8% in 2008 to 60.41% in 2016. To address the national energy security and GHG emission reduction, China has made considerable progress in expanding renewable energy portfolio, especially liquid biofuels. However, under the pressure of high population and vulnerable food security, China's National Development and Reform Commission (NDRC) ruled that bioenergy is only allowed to be produced using non-cereal feedstock. In addition, the energy crops can only be planted on marginal land, which is the land not suitable for growing field crops due to edaphic and/or climatic limitations, and other environmental risks. Although there have been a number of studies about estimating the marginal land for energy plants' cultivation in China, as to the different definition of marginal land and land use data, the results are quite different. Furthermore, even if there is enough marginal land suitable for energy plants' cultivation, economic viability of cultivating energy plants on marginal land is critical. In order to analyze the availability and economic analyses of the marginal land for bioenergy production strategy, firstly, by using of the latest and most authoritative land use data, this study focused on the assessment of marginal land resources and bioenergy potential by planting five species of energy plants including Cassava, Jatropha curcas, Helianthus tuberous L, Pistacia chinensis, Xanthoceras sorbifolia Bunge. The results indicate that there are 289.71 million ha marginal land can be used for these five energy plants' cultivation, which can produce 24.45 million tons bioethanol and 8.77 million tons of biodiesel. Secondly, based on field survey data and literature reviews, we found that, from the farmers

  1. Deep seismic studies of conjugate profiles from the Nova Scotia - Moroccan and the Liguro-Provencal margin pairs

    Science.gov (United States)

    Klingelhoefer, F.; Biari, Y.; Sahabi, M.; Aslanian, D.; Philippe, S.; Schnabel, M.; Moulin, M.; Louden, K. E.; Funck, T.; Reichert, C. J.

    2014-12-01

    The structure of conjugate passive margins provides information about rifting styles, opening of an ocean and formation of it's associated sedimentary basins. In order to distinguish between tectonic inheritance and structures directly related to rifting of passive margins conjugate profiles have to be acquired on margins on diverse locations and different ages. In this study we use new and existing reflection and wide-angle seismic data from two margin pairs, the 200 Ma year old Nova-Scotia - Morocco margin pair and the only 20 Ma Gulf of Lions - Sardinia margin pair. On both margin pairs wide-angle seismic data combined with reflection seismic data were acquired on conjugate profiles on sea and extended on land. Forward modelling of the deep crustal structure along the four transects indicates that a high velocity zone (HVZ) (> 7.2 km/s) is present at the base of the lower crust on all four margins along the ocean-continental transition zone (OCT). This may represent either exhumed upper mantle material or injection of upper mantle material into proto-oceanic crust at the onset of sea-floor spreading. However the width of the HVZ might strongly differ between conjugates, which may be the result of tectonic inheritance, for example the presence of ancient subduction zones or orogens. Both margin pairs show a similar unthinned continental crustal thickness. Crustal thinning and upper-to-lower crustal thickness vary between margin pairs, but remain nearly symmetric on conjugate profiles and might therefore depend on the structure and mechanical properties of the original continental crust. For the Mediterranean margin pair, the oceanic crust is similar on both sides, with a thickness of only 4-5 km. For the Atlantic margin pair, oceanic crustal thickness is higher on the Moroccan Margin, a fact that can be explained by either asymmetric spreading or by the volcanic underplating, possibly originating from the Canary Hot Spot.

  2. Extraction of data from margin calculations in prostate radiotherapy from a commercial record and verify system

    International Nuclear Information System (INIS)

    Fox, C.; Kron, T.; Fisher, R.; Tai, K.H.; Thompson, A.; Owen, R.

    2008-01-01

    Full text: Radiation therapy is a widely prescribed and effective modality for the treatment of prostate cancer.1 3 Radiation therapy relies on precise targeting of the treatment site to deliver the required dose to the tumour while sparing critical organs nearby. To achieve this, it is necessary to allow for the effects of organ and patient motion, both during and between treatment fractions. In the treatment planning process, a margin is added to the clinical target volume (CTV) to create the planning target volume (PTV) to allow for targeting uncertainties which Iare dominated by these movements.4 5 Deciding the appropriate margin size is important since an excessively large margin will result in increased damage to adjacent normal tissues while an undersized margin will leave parts of the target underdosed. With the marked improvement in technology available with new treatment machines, remote online setup correction using high quality kilovoltage images has become straightforward and widely available. Used together with implanted radio-opaque markers, remote online setup correction allows direct targeting of the prostate organ, and significant reduction in the effects of interfraction motion.6 1 1 The introduction of this technology into a therapy department makes a reduction of CTV to PTV margin size possible. There are many published works dealing with margin size calculation for prostate treatment planning. The best known and most widely cited work is that of van Herk which modelled the prostate using simple geometry to calculate a minimum dose coverage probability.13 The outcome of this modelling was a simple and easily understood formula with just the patient group random and systematic setup errors used to calculate margin size. To apply such margin recipes, the patient group's random and systematic error performance must be well known, which requires the collection of a substantial quantity of data. The aim of the project described here was to collect

  3. NRC Seismic Design Margins Program Plan

    International Nuclear Information System (INIS)

    Cummings, G.E.; Johnson, J.J.; Budnitz, R.J.

    1985-08-01

    Recent studies estimate that seismically induced core melt comes mainly from earthquakes in the peak ground acceleration range from 2 to 4 times the safe shutdown earthquake (SSE) acceleration used in plant design. However, from the licensing perspective of the US Nuclear Regulatory Commission, there is a continuing need for consideration of the inherent quantitative seismic margins because of, among other things, the changing perceptions of the seismic hazard. This paper discusses a Seismic Design Margins Program Plan, developed under the auspices of the US NRC, that provides the technical basis for assessing the significance of design margins in terms of overall plant safety. The Plan will also identify potential weaknesses that might have to be addressed, and will recommend technical methods for assessing margins at existing plants. For the purposes of this program, a general definition of seismic design margin is expressed in terms of how much larger that the design basis earthquake an earthquake must be to compromise plant safety. In this context, margin needs to be determined at the plant, system/function, structure, and component levels. 14 refs., 1 fig

  4. Study Suggests Smaller Melanoma Excision Margins May Be Option for Some Patients

    Science.gov (United States)

    A randomized controlled trial of patients with stage IIA–C cutaneous melanoma thicker than 2-mm found that a 2-cm surgical resection margin is sufficient and is as safe for patients as a 4-cm margin.

  5. Planning Target Margin Calculations for Prostate Radiotherapy Based on Intrafraction and Interfraction Motion Using Four Localization Methods

    International Nuclear Information System (INIS)

    Beltran, Chris; Herman, Michael G.; Davis, Brian J.

    2008-01-01

    Purpose: To determine planning target volume (PTV) margins for prostate radiotherapy based on the internal margin (IM) (intrafractional motion) and the setup margin (SM) (interfractional motion) for four daily localization methods: skin marks (tattoo), pelvic bony anatomy (bone), intraprostatic gold seeds using a 5-mm action threshold, and using no threshold. Methods and Materials: Forty prostate cancer patients were treated with external radiotherapy according to an online localization protocol using four intraprostatic gold seeds and electronic portal images (EPIs). Daily localization and treatment EPIs were obtained. These data allowed inter- and intrafractional analysis of prostate motion. The SM for the four daily localization methods and the IM were determined. Results: A total of 1532 fractions were analyzed. Tattoo localization requires a SM of 6.8 mm left-right (LR), 7.2 mm inferior-superior (IS), and 9.8 mm anterior-posterior (AP). Bone localization requires 3.1, 8.9, and 10.7 mm, respectively. The 5-mm threshold localization requires 4.0, 3.9, and 3.7 mm. No threshold localization requires 3.4, 3.2, and 3.2 mm. The intrafractional prostate motion requires an IM of 2.4 mm LR, 3.4 mm IS and AP. The PTV margin using the 5-mm threshold, including interobserver uncertainty, IM, and SM, is 4.8 mm LR, 5.4 mm IS, and 5.2 mm AP. Conclusions: Localization based on EPI with implanted gold seeds allows a large PTV margin reduction when compared with tattoo localization. Except for the LR direction, bony anatomy localization does not decrease the margins compared with tattoo localization. Intrafractional prostate motion is a limiting factor on margin reduction

  6. Development of continental margins of the Atlantic Ocean and successive breakup of the Pangaea-3 supercontinent

    Science.gov (United States)

    Melankholina, E. N.; Sushchevskaya, N. M.

    2017-01-01

    Comparative tectonic analysis of passive margins of the Atlantic Ocean has been performed. Tectonotypes of both volcanic and nonvolcanic margins are described, and their comparison with other passive Atlantic margins is given. The structural features of margins, peculiarities of magmatism, its sources and reasons for geochemical enrichment of melts are discussed. The important role of melting of the continental lithosphere in the development of magmatism is demonstrated. Enriched EM I and EM II sources are determined for the lower parts of the volcanic section, and a depleted or poorly enriched source is determined for the upper parts of the volcanic section based on isotope data. The conclusions of the paper relate to tectonic settings of the initial occurrence of magmatism and rifting and breakup during the period of opening of the Mesozoic Ocean. It was found out that breakup and magmatism at proximal margins led only to insignificant structural transformations and reduction of the thickness of the ancient continental crust, while very important magmatic events happened later in the distal zone. New growth of magmatic crust at the stage of continental breakup is determined as a typical feature of distal zones of the margins under study. The relationship of development of margins with the impact of deep plumes as the source of magmatic material or a heat source only is discussed. Progradation of the zone of extension and breakup into the areas of cold lithosphere of the Atlantic and the formation of a single tectonomagmatic system of the ocean are under consideration.

  7. Experiences of sickness absence, marginality and Medically Unexplained Physical Symptoms - A focus group study

    DEFF Research Database (Denmark)

    E.L., Werner; A, Aamland; Malterud, Kirsti

    2013-01-01

    PURPOSE: Medically unexplained physical symptoms (MUPS) form a major cause of sickness absence. The purpose of this study was to explore factors which may influence further marginalization among patients with MUPS on long-term sickness absence. METHODS: Two focus-group discussions were conducted...... of objective findings were perceived as an additional burden to the sickness absence itself. Factors that could counteract further marginalization were a supportive social network, positive coping strategies such as keeping to the daily schedule and physical activity, and positive attention and confidence from...

  8. Decoding the Margins: What Can the Fractal Geometry of Basaltic Flow Margins Tell Us?

    Science.gov (United States)

    Schaefer, E. I.; Hamilton, C.; Neish, C.; Beard, S. P.; Bramson, A. M.; Sori, M.; Rader, E. L.

    2016-12-01

    Studying lava flows on other planetary bodies is essential to characterizing eruption styles and constraining the bodies' thermal evolution. Although planetary basaltic flows are common, many key features are not resolvable in orbital imagery. We are thus developing a technique to characterize basaltic flow type, sub-meter roughness, and sediment mantling from these data. We will present the results from upcoming fieldwork at Craters of the Moon National Monument and Preserve with FINESSE (August) and at Hawai'i Volcanoes National Park (September). We build on earlier work that showed that basaltic flow margins are approximately fractal [Bruno et al., 1992; Gaonac'h et al., 1992] and that their fractal dimensions (D) have distinct `a`ā and pāhoehoe ranges under simple conditions [Bruno et al., 1994]. Using a differential GPS rover, we have recently shown that the margin of Iceland's 2014 Holuhraun flow exhibits near-perfect (R2=0.9998) fractality for ≥24 km across dm to km scales [Schaefer et al., 2016]. This finding suggests that a fractal-based technique has significant potential to characterize flows at sub-resolution scales. We are simultaneously seeking to understand how margin fractality can be modified. A preliminary result for an `a'ā flow in Hawaii's Ka'ū Desert suggests that although aeolian mantling obscures the original flow margin, the apparent margin (i.e., sediment-lava interface) remains fractal [Schaefer et al., 2015]. Further, the apparent margin's D is likely significantly modified from that of the original margin. Other factors that we are exploring include erosion, transitional flow types, and topographic confinement. We will also rigorously test the intriguing possibility that margin D correlates with the sub-meter Hurst exponent H of the flow surface, a common metric of roughness scaling [e.g., Shepard et al., 2001]. This hypothesis is based on geometric arguments [Turcotte, 1997] and is qualitatively consistent with all results so far.

  9. Evaluating the marginal utility principle for long-term hydropower scheduling

    International Nuclear Information System (INIS)

    Zhao, Tongtiegang; Zhao, Jianshi; Liu, Pan; Lei, Xiaohui

    2015-01-01

    Highlights: • Analysis of one-, two- and multi-period hydropower scheduling. • Derivation of marginal cost and marginal return of carry-over storage. • Evaluation of the marginal utility principle in a case study of the Three Gorges Reservoir. - Abstract: The conversion of the potential energy of dammed water into hydropower depends on both reservoir storage and release, which are the major difficulties in hydropower reservoir operation. This study evaluates the marginal utility principle, which determines the optimal carry-over storage between periods, for long-term hydropower scheduling. Increasing marginal cost and decreasing marginal return are two important characteristics that determine the marginal utility principle in water supply. However, the notion of decreasing marginal return is inapplicable in hydropower scheduling. Instead, the carry-over storage from one period has an increasing marginal contribution to the power generation in the next period. Although carry-over storage incurs an increasing marginal cost to the power generation in the current period, the marginal return is higher than the marginal cost. The marginal return from the carry-over storage further increases in the multi-period case. These findings suggest saving as much carry-over storage as possible, which is bounded by the operational constraints of storage capacity, environmental flow, and installed capacity in actual hydropower scheduling. The marginal utility principle is evaluated for a case study of the Three Gorges Reservoir, and the effects of the constraints are discussed. Results confirm the theoretical findings and show that the marginal return from carry-over storage is larger than the marginal cost. The operational constraints help determine the optimal carry-over storage.

  10. SU-E-J-88: Margin Reduction of Level II/III Planning Target Volume for Image-Guided Simultaneous Integrated Boost Head-And-Neck Treatment

    International Nuclear Information System (INIS)

    Can, S; Neylon, J; Qi, S; Santhanam, A; Low, D

    2014-01-01

    Purpose: To investigate the feasibility of improved normal tissue sparing for head-and-neck (H'N) image-guided radiotherapy (IGRT) by employing tighter CTV-to-PTV margins for target level II/III though a GPU-based deformable image registration and dose accumulation framework. Methods: Ten H'N simultaneous integrated boost cases treated on TomoTherapy were retrospectively analyzed. Weekly kVCT scans in addition to daily MVCT scans were acquired for each patient. Reduced margin plans were generated with 0- mm margin for level II and III PTV (while 3-5 mm margin for PTV1) and compared with the standard margin plan using 3-5mm margin to all CTV1-3 (reference plan). An in-house developed GPU-based 3D image deformation tool was used to register and deform the weekly KVCTs with the planning CT and determine the delivered mean/minimum/maximum dose, dose volume histograms (DVHs), etc. Results: Compared with the reference plans, the averaged cord maximum, the right and left parotid doses reduced by 22.7 %, 16.5 %, and 9 % respectively in the reduced margin plans. The V95 for PTV2 and PTV3 were found within 2 and 5% between the reference and tighter margin plans. For the reduced margin plans, the averaged cumulative mean doses were consistent with the planned dose for PTV1, PTV2 and PTV3 within 1.5%, 1.7% and 1.4%. Similar dose variations of the delivered dose were seen for the reference and tighter margin plans. The delivered maximum and mean doses for the cord were 3.55 % and 2.37% higher than the planned doses; a 5 % higher cumulative mean dose for the parotids was also observed for the delivered dose than the planned doses in both plans. Conclusion: By imposing tighter CTV-to-PTV margins for level II and III targets for H'N irradiation, acceptable cumulative doses were achievable when coupled with weekly kVCT guidance while improving normal structure sparing

  11. Assessment of Marginal Adaptation and Sealing Ability of Root Canal Sealers: An in vitro Study.

    Science.gov (United States)

    Remy, Vimal; Krishnan, Vineesh; Job, Tisson V; Ravisankar, Madhavankutty S; Raj, C V Renjith; John, Seena

    2017-12-01

    This study aims to compare the marginal adaptation and sealing ability [mineral trioxide aggregate (MTA)-Fillapex, AH Plus, Endofill sealers] of root canal sealers. In the present study, the inclusion criteria include 45 single-rooted extracted mandibular premolar teeth, with single canal and complete root formation. The sectioning of the samples was done at the cementoenamel junction using a low-speed diamond disc. Step-back technique was used to prepare root canals manually. The MTA-Fillapex, AH Plus, and Endofill sealers were the three experimental sealer groups to which 45 teeth were distributed. Under scanning electron microscope (SEM), marginal gap at sealer and root dentin interface were examined at coronal and apical halves of root canal. Among the three maximum marginal adaptations were seen with AH Plus sealer (4.10 ± 0.10) which is followed by Endofill sealer (1.44 ± 0.18) and MTA-Fillapex sealer (0.80 ± 0.22). Between the coronal and apical marginal adaptation, significant statistical difference (p = 0.001) was seen in AH Plus sealer. When a Mann-Whitney U-test was done on MTA-Fillapex sealer vs AH Plus sealer and AH Plus sealer vs Endofill sealer, there was a statistically significant difference (p marginal adaptation when compared with other sealers used. For sealing space of crown wall and main cone in root canal treatment, sealers play an important role. The other advantages of sealers are that they are used to fill voids and irregularities in root channel, secondary, lateral channels, and space between applied gutta-percha cones and also act as tripper during filling.

  12. Geophysical studies over the continental margins of the east coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    Rao, T.C.S.; Rao, V.B.

    . Continuity of surface and subsurface features from profile to profile is indicated. Two major structural elements - viz. The "Marginal High", situated at the foot of the continental slope and extending along the east coast of India, and the "Marginal Basin...

  13. On the dynamics of turbulent transport near marginal stability

    International Nuclear Information System (INIS)

    Diamond, P.H.; Hahm, T.S.

    1995-03-01

    A general methodology for describing the dynamics of transport near marginal stability is formulated. Marginal stability is a special case of the more general phenomenon of self-organized criticality. Simple, one field models of the dynamics of tokamak plasma self-organized criticality have been constructed, and include relevant features such as sheared mean flow and transport bifurcations. In such models, slow mode (i.e. large scale, low frequency transport events) correlation times determine the behavior of transport dynamics near marginal stability. To illustrate this, impulse response scaling exponents (z) and turbulent diffusivities (D) have been calculated for the minimal (Burgers) and sheared flow models. For the minimal model, z = 1 (indicating ballastic propagation) and D ∼(S 0 2 ) 1/3 , where S 0 2 is the noise strength. With an identically structured noise spectrum and flow with shearing rate exceeding the ambient decorrelation rate for the largest scale transport events, diffusion is recovered with z = 2 and D ∼ (S 0 2 ) 3/5 . This indicates a qualitative change in the dynamics, as well as a reduction in losses. These results are consistent with recent findings from ρ scaling scans. Several tokamak transport experiments are suggested

  14. How does imaging frequency and soft tissue motion affect the PTV margin size in partial breast and boost radiotherapy?

    International Nuclear Information System (INIS)

    Harris, Emma J.; Donovan, Ellen M.; Coles, Charlotte E.; Boer, Hans C.J. de; Poynter, Andrew; Rawlings, Christine; Wishart, Gordon C.; Evans, Philip M.

    2012-01-01

    Purpose: This study investigates (i) the effect of verification protocols on treatment accuracy and PTV margins for partial breast and boost breast radiotherapy with short fractionation schema (15 fractions), (ii) the effect of deformation of the excision cavity (EC) on PTV margin size, (iii) the imaging dose required to achieve specific PTV margins. Methods and materials: Verification images using implanted EC markers were studied in 36 patients. Target motion was estimated for a 15 fraction partial breast regimen using imaging protocols based on on-line and off-line motion correction strategies (No Action Level (NAL) and the extended NAL (eNAL) protocols). Target motion was used to estimate a PTV margin for each protocol. To evaluate treatment errors due to deformation of the excision cavity, individual marker positions were obtained from 11 patients. The mean clip displacement and daily variation in clip position during radiotherapy were determined and the contribution of these errors to PTV margin calculated. Published imaging dose data were used to estimate total dose for each protocol. Finally the number of images required to obtain a specific PTV margin was evaluated and hence, the relationship between PTV margins and imaging dose was investigated. Results: The PTV margin required to account for excision cavity motion, varied between 10.2 and 2.4 mm depending on the correction strategy used. Average clip movement was 0.8 mm and average variation in clip position during treatment was 0.4 mm. The contribution to PTV margin from deformation was estimated to be small, less than 0.2 mm for both off-line and on-line correction protocols. Conclusion: A boost or partial breast PTV margin of ∼10 mm, is possible with zero imaging dose and workload, however, patients receiving boost radiotherapy may benefit from a margin reduction of ∼4 mm with imaging doses from 0.4 cGy to 25 cGy using an eNAL protocol. PTV margin contributions from deformation errors are likely

  15. Comparison of marginal accuracy of castings fabricated by conventional casting technique and accelerated casting technique: an in vitro study.

    Science.gov (United States)

    Reddy, S Srikanth; Revathi, Kakkirala; Reddy, S Kranthikumar

    2013-01-01

    Conventional casting technique is time consuming when compared to accelerated casting technique. In this study, marginal accuracy of castings fabricated using accelerated and conventional casting technique was compared. 20 wax patterns were fabricated and the marginal discrepancy between the die and patterns were measured using Optical stereomicroscope. Ten wax patterns were used for Conventional casting and the rest for Accelerated casting. A Nickel-Chromium alloy was used for the casting. The castings were measured for marginal discrepancies and compared. Castings fabricated using Conventional casting technique showed less vertical marginal discrepancy than the castings fabricated by Accelerated casting technique. The values were statistically highly significant. Conventional casting technique produced better marginal accuracy when compared to Accelerated casting. The vertical marginal discrepancy produced by the Accelerated casting technique was well within the maximum clinical tolerance limits. Accelerated casting technique can be used to save lab time to fabricate clinical crowns with acceptable vertical marginal discrepancy.

  16. The marginal band system in nymphalid butterfly wings.

    Science.gov (United States)

    Taira, Wataru; Kinjo, Seira; Otaki, Joji M

    2015-01-01

    Butterfly wing color patterns are highly complex and diverse, but they are believed to be derived from the nymphalid groundplan, which is composed of several color pattern systems. Among these pattern systems, the marginal band system, including marginal and submarginal bands, has rarely been studied. Here, we examined the color pattern diversity of the marginal band system among nymphalid butterflies. Marginal and submarginal bands are usually expressed as a pair of linear bands aligned with the wing margin. However, a submarginal band can be expressed as a broken band, an elongated oval, or a single dot. The marginal focus, usually a white dot at the middle of a wing compartment along the wing edge, corresponds to the pupal edge spot, one of the pupal cuticle spots that signify the locations of color pattern organizing centers. A marginal band can be expressed as a semicircle, an elongated oval, or a pair of eyespot-like structures, which suggest the organizing activity of the marginal focus. Physical damage at the pupal edge spot leads to distal dislocation of the submarginal band in Junonia almana and in Vanessa indica, suggesting that the marginal focus functions as an organizing center for the marginal band system. Taken together, we conclude that the marginal band system is developmentally equivalent to other symmetry systems. Additionally, the marginal band is likely a core element and the submarginal band a paracore element of the marginal band system, and both bands are primarily specified by the marginal focus organizing center.

  17. Continental transform margins : state of art and future milestones

    Science.gov (United States)

    Basile, Christophe

    2010-05-01

    Transform faults were defined 45 years ago as ‘a new class of fault' (Wilson, 1965), and transform margins were consequently individualized as a new class of continental margins. While transform margins represent 20 to 25 % of the total length of continent-ocean transitions, they were poorly studied, especially when compared with the amount of data, interpretations, models and conceptual progress accumulated on divergent or convergent continental margins. The best studied examples of transform margins are located in the northern part of Norway, south of South Africa, in the gulf of California and on both sides of the Equatorial Atlantic. Here is located the Côte d'Ivoire - Ghana margin, where the more complete data set was acquired, based on numerous geological and geophysical cruises, including ODP Leg 159. The first models that encompassed the structure and evolution of transform margins were mainly driven by plate kinematic reconstructions, and evidenced the diachronic end of tectonic activity and the non-cylindrical character of these margins, with a decreasing strike-slip deformation from the convex to the concave divergent-transform intersections. Further thermo-mechanical models were more specifically designed to explain the vertical displacements along transform margins, and especially the occurrence of high-standing marginal ridges. These thermo-mechanical models involved either heat transfer from oceanic to continental lithospheres across the transform faults or tectonically- or gravity-driven mass transfer in the upper crust. These models were far from fully fit observations, and were frequently dedicated to specific example, and not easily generalizable. Future work on transform continental margins may be expected to fill some scientific gaps, and the definition of working directions can benefit from the studies dedicated to other types of margins. At regional scale the structural and sedimentological variability of transform continental margins has

  18. Hippocampal sparing radiotherapy for pediatric medulloblastoma: impact of treatment margins and treatment technique.

    Science.gov (United States)

    Brodin, N Patrik; Munck af Rosenschöld, Per; Blomstrand, Malin; Kiil-Berthlesen, Anne; Hollensen, Christian; Vogelius, Ivan R; Lannering, Birgitta; Bentzen, Søren M; Björk-Eriksson, Thomas

    2014-04-01

    We investigated how varying the treatment margin and applying hippocampal sparing and proton therapy impact the risk of neurocognitive impairment in pediatric medulloblastoma patients compared with current standard 3D conformal radiotherapy. We included 17 pediatric medulloblastoma patients to represent the variability in tumor location relative to the hippocampal region. Treatment plans were generated using 3D conformal radiotherapy, hippocampal sparing intensity-modulated radiotherapy, and spot-scanned proton therapy, using 3 different treatment margins for the conformal tumor boost. Neurocognitive impairment risk was estimated based on dose-response models from pediatric CNS malignancy survivors and compared among different margins and treatment techniques. Mean hippocampal dose and corresponding risk of cognitive impairment were decreased with decreasing treatment margins (P < .05). The largest risk reduction, however, was seen when applying hippocampal sparing proton therapy-the estimated risk of impaired task efficiency (95% confidence interval) was 92% (66%-98%), 81% (51%-95%), and 50% (30%-70%) for 3D conformal radiotherapy, intensity-modulated radiotherapy, and proton therapy, respectively, for the smallest boost margin and 98% (78%-100%), 90% (60%-98%), and 70% (39%-90%) if boosting the whole posterior fossa. Also, the distance between the closest point of the planning target volume and the center of the hippocampus can be used to predict mean hippocampal dose for a given treatment technique. We estimate a considerable clinical benefit of hippocampal sparing radiotherapy. In choosing treatment margins, the tradeoff between margin size and risk of neurocognitive impairment quantified here should be considered.

  19. "We call ourselves marginalized"

    DEFF Research Database (Denmark)

    Jørgensen, Nanna Jordt

    2014-01-01

    of the people we refer to as marginalized. In this paper, I discuss how young secondary school graduates from a pastoralist community in Kenya use and negotiate indigeneity, marginal identity, and experiences of marginalization in social navigations aimed at broadening their current and future opportunities. I...

  20. Marginal Matter

    Science.gov (United States)

    van Hecke, Martin

    2013-03-01

    All around us, things are falling apart. The foam on our cappuccinos appears solid, but gentle stirring irreversibly changes its shape. Skin, a biological fiber network, is firm when you pinch it, but soft under light touch. Sand mimics a solid when we walk on the beach but a liquid when we pour it out of our shoes. Crucially, a marginal point separates the rigid or jammed state from the mechanical vacuum (freely flowing) state - at their marginal points, soft materials are neither solid nor liquid. Here I will show how the marginal point gives birth to a third sector of soft matter physics: intrinsically nonlinear mechanics. I will illustrate this with shock waves in weakly compressed granular media, the nonlinear rheology of foams, and the nonlinear mechanics of weakly connected elastic networks.

  1. Marginalization of the Youth

    DEFF Research Database (Denmark)

    Jensen, Niels Rosendal

    2009-01-01

    The article is based on a key note speach in Bielefeld on the subject "welfare state and marginalized youth", focusing upon the high ambition of expanding schooling in Denmark from 9 to 12 years. The unintended effect may be a new kind of marginalization.......The article is based on a key note speach in Bielefeld on the subject "welfare state and marginalized youth", focusing upon the high ambition of expanding schooling in Denmark from 9 to 12 years. The unintended effect may be a new kind of marginalization....

  2. Marginal sites in for biomass production - case study sites in northern Greece. Obstacles and solutions

    Science.gov (United States)

    Kiourtsis, Fotios; Keramitzis, Dimitris; Papatheodorou, Ioannis; Tsoulakaki, Dimitra; Gontzaridou, Marina; Lampetsou, Eugenia; Fragkiskakis, Nikitas; Gerwin, Werner; Repmann, Frank; Baumgarten, Wibke

    2017-04-01

    In 2016, D.A.M.T, the Hellenic Forest Service for northern Greece (Macedonia and Thrace Regions), with the support of BTU Cottbus-Senftenberg Reseach Center Landscape Development and Mining Landscapes experts and following common standard protocols of the SEEMLA project, established three plots, in the northeastern part of Greece, in Rodopi prefecture (main forest species for biomass production: Pinus Nigra, Pinus Brutia and Robinia Pseudacacia). Nearby productive ecosystems (including forests etc.) or successional sites will be used as references for estimating the potentials of MagL. Further existing plantations of energy crops on similar MagL, will be used to assess potential crop yields. These plots represent different types of marginal lands, they were specifically selected for SEEMLA purposes (reliable and sustainable exploitation of biomass) and are entirely different from other inventories, used for typical forest operations in Greece. The main differences are:  an intensively studied core area,  Soil Quality Rating (SQR) method measurements,  Soil Classification Maps - parameters estimation (land capability classes and landforms),  tightly spaced plantations (1,5 m x 1,5 m),  cropping systems,  shorter rotations and  the need for special forest management study. The combination of these requirements with the soil conditions of the area has created significant issues on plots establishment and accurate recording of supply chain stages. Main expected SEEMLA impacts are: • provide a substantial amount of EU energy needs from marginal/degraded land, • avoidance of land use conflicts by strengthening the ability to use MagL for biomass production for energy, • reduction of EU-wide greenhouse gas, • mitigation of conflicts regarding sustainability and biodiversity for the utilization of MagL for biomass production, • growth of plantations of bioenergy carriers from MagL at competitive costs, • expansion of economic opportunities

  3. Convexity and Marginal Vectors

    NARCIS (Netherlands)

    van Velzen, S.; Hamers, H.J.M.; Norde, H.W.

    2002-01-01

    In this paper we construct sets of marginal vectors of a TU game with the property that if the marginal vectors from these sets are core elements, then the game is convex.This approach leads to new upperbounds on the number of marginal vectors needed to characterize convexity.An other result is that

  4. Contributions to knowledge of the continental margin of Uruguay. Uruguayan continental margin: Physiographic and seismic analysis

    International Nuclear Information System (INIS)

    Preciozzi, F

    2014-01-01

    This work is about the kind of continental margins such as a )Atlantic type passive margins which can be hard or soft b) An active or Pacific margins that because of the very frequent earthquakes develop a morphology dominated by tectonic processes. The Uruguayan continental margin belongs to a soft Atlantic margin

  5. Fixing soft margins

    NARCIS (Netherlands)

    P. Kofman (Paul); A. Vaal, de (Albert); C.G. de Vries (Casper)

    1993-01-01

    textabstractNon-parametric tolerance limits are employed to calculate soft margins such as advocated in Williamson's target zone proposal. In particular, the tradeoff between softness and zone width is quantified. This may be helpful in choosing appropriate margins. Furthermore, it offers

  6. SOCIAL MARGINALIZATION AND HEALTH

    Directory of Open Access Journals (Sweden)

    Marjana Bogdanović

    2007-04-01

    Full Text Available The 20th century was characterized by special improvement in health. The aim of WHO’s policy EQUITY IN HEALTH is to enable equal accessibility and equal high quality of health care for all citizens. More or less some social groups have stayed out of many social systems even out of health care system in the condition of social marginalization. Phenomenon of social marginalization is characterized by dynamics. Marginalized persons have lack of control over their life and available resources. Social marginalization stands for a stroke on health and makes the health status worse. Low socio-economic level dramatically influences people’s health status, therefore, poverty and illness work together. Characteristic marginalized groups are: Roma people, people with AIDS, prisoners, persons with development disorders, persons with mental health disorders, refugees, homosexual people, delinquents, prostitutes, drug consumers, homeless…There is a mutual responsibility of community and marginalized individuals in trying to resolve the problem. Health and other problems could be solved only by multisector approach to well-designed programs.

  7. Customized Computed Tomography-Based Boost Volumes in Breast-Conserving Therapy: Use of Three-Dimensional Histologic Information for Clinical Target Volume Margins

    International Nuclear Information System (INIS)

    Hanbeukers, Bianca; Borger, Jacques; Ende, Piet van den; Ent, Fred van der; Houben, Ruud; Jager, Jos; Keymeulen, Kristien; Murrer, Lars; Sastrowijoto, Suprapto; Vijver, Koen van de; Boersma, Liesbeth

    2009-01-01

    Purpose: To determine the difference in size between computed tomography (CT)-based irradiated boost volumes and simulator-based irradiated volumes in patients treated with breast-conserving therapy and to analyze whether the use of anisotropic three-dimensional clinical target volume (CTV) margins using the histologically determined free resection margins allows for a significant reduction of the CT-based boost volumes. Patients and Methods: The CT data from 49 patients were used to delineate a planning target volume (PTV) with isotropic CTV margins and to delineate a PTV sim that mimicked the PTV as delineated in the era of conventional simulation. For 17 patients, a PTV with anisotropic CTV margins was defined by applying customized three-dimensional CTV margins, according to the free excision margins in six directions. Boost treatment plans consisted of conformal portals for the CT-based PTVs and rectangular fields for the PTV sim . Results: The irradiated volume (volume receiving ≥95% of the prescribed dose [V 95 ]) for the PTV with isotropic CTV margins was 1.6 times greater than that for the PTV sim : 228 cm 3 vs. 147 cm 3 (p 95 was similar to the V 95 for the PTV sim (190 cm 3 vs. 162 cm 3 ; p = NS). The main determinant for the irradiated volume was the size of the excision cavity (p < .001), which was mainly related to the interval between surgery and the planning CT scan (p = .029). Conclusion: CT-based PTVs with isotropic margins for the CTV yield much greater irradiated volumes than fluoroscopically based PTVs. Applying individualized anisotropic CTV margins allowed for a significant reduction of the irradiated boost volume.

  8. Sickness absence, marginality, and medically unexplained physical symptoms: a focus-group study of patients' experiences.

    Science.gov (United States)

    Aamland, Aase; Werner, Erik L; Malterud, Kirsti

    2013-06-01

    Medically unexplained physical symptoms (MUPS) form a major cause of sickness absence. The purpose of this study was to explore factors which may influence further marginalization among patients with MUPS on long-term sickness absence. Two focus-group discussions were conducted with a purposive sample of 12 participants, six men and six women, aged 24-59 years. Their average duration of sickness absence was 10.5 months. Participants were invited to share stories about experiences from the process leading to the ongoing sickness absence, with a focus on the causes being medically unexplained. Systematic text condensation was applied for analysis. Inspired by theories of marginalization and coping, the authors searched for knowledge of how patients' positive resources can be mobilized to counteract processes of marginality. Analysis revealed how invisible symptoms and lack of objective findings were perceived as an additional burden to the sickness absence itself. Factors that could counteract further marginalization were a supportive social network, positive coping strategies such as keeping to the daily schedule and physical activity, and positive attention and confidence from professionals. Confidence from both personal and professional contacts is crucial. GPs have an important and appreciated role in this aspect.

  9. Indian Ocean margins

    Digital Repository Service at National Institute of Oceanography (India)

    Naqvi, S.W.A

    in the latter two areas. Some of these fluxes are expected to be substantial in the case of Indonesian continental margins and probably also across the eastern coasts of Africa not covered in this chapter. However, a dearth of information makes these margins...

  10. Marginal costs and co-benefits of energy efficiency investments

    International Nuclear Information System (INIS)

    Jakob, Martin

    2006-01-01

    Key elements of present investment decision-making regarding energy efficiency of new buildings and the refurbishment of existing buildings are the marginal costs of energy efficiency measures and incomplete knowledge of investors and architects about pricing, co-benefits and new technologies. This paper reports on a recently completed empirical study for the Swiss residential sector. It empirically quantifies the marginal costs of energy efficiency investments (i.e. additional insulation, improved window systems, ventilation and heating systems and architectural concepts). For the private sector, first results on the economic valuation of co-benefits such as improved comfort of living, improved indoor air quality, better protection against external noise, etc. may amount to the same order of magnitude as the energy-related benefits are given. The cost-benefit analysis includes newly developed technologies that show large variations in prices due to pioneer market pricing, add-on of learning costs and risk components of the installers. Based on new empirical data on the present cost-situation and past techno-economic progress, the potential of future cost reduction was estimated applying the experience curve concept. The paper shows, for the first time, co-benefits and cost dynamics of energy efficiency investments, of which decision makers in the real estate sector, politics and administrations are scarcely aware

  11. Sedimentation on continental margins: An integrated program for innovative studies during the 1990s

    Science.gov (United States)

    Nittrourer, Charles A.; Coleman, James M.; Rouge, Baton; Flood, Roger D.; Ginsburg, Robert N.; Gorsline, Donn S.; Hine, Albert C.; Sternberg, Richard W.; Swift, Donald J. P.; Wright, L. Donelson

    Continental margins are of great scientific interest, and they represent the focus of human interaction with the ocean. Their deep structure forms the transition from continental to oceanic crust, and their surface expression extends from coastal environments of estuaries and shorelines across the continental shelf and slope to either the base of a continental rise or a marginal trough. Modern continental margins represent natural laboratories for investigation of complex relationships between physical, chemical, and biological phenomena, which are sensitive to environmental conditions both on the land and in the ocean. The history of these conditions is preserved within the sedimentary deposits of continental margins. The deposits form repositories for much of the particulate material transported off the world's land masses and produced from dissolved components in the world ocean. Past deposits of continental margins have been uplifted to form many mountain ranges and sedimentary terrains of the world, which record details of Earth history and contain valuable natural resources, such as petroleum and natural gas. Modern deposits of continental margins record the more recent events that have influenced Earth and also contain natural resources (for instance, minerals, sand, and gravel), as well as anthropogenic pollutants (for example, heavy metals and pesticides). The fates of many materials beneficial and deleterious to humans are dependent on the pathways followed by sedimentary particles on continental margins.

  12. Effect of posterior crown margin placement on gingival health.

    Science.gov (United States)

    Reitemeier, Bernd; Hänsel, Kristina; Walter, Michael H; Kastner, Christian; Toutenburg, Helge

    2002-02-01

    The clinical impact of posterior crown margin placement on gingival health has not been thoroughly quantified. This study evaluated the effect of posterior crown margin placement with multivariate analysis. Ten general dentists reviewed 240 patients with 480 metal-ceramic crowns in a prospective clinical trial. The alloy was randomly selected from 2 high gold, 1 low gold, and 1 palladium alloy. Variables were the alloy used, oral hygiene index score before treatment, location of crown margins at baseline, and plaque index and sulcus bleeding index scores recorded for restored and control teeth after 1 year. The effect of crown margin placement on sulcular bleeding and plaque accumulation was analyzed with regression models (Prisk of bleeding at intrasulcular posterior crown margins was approximately twice that at supragingival margins. Poor oral hygiene before treatment and plaque also were associated with sulcular bleeding. Facial sites exhibited a lower probability of sulcular bleeding than lingual surfaces. Type of alloy did not influence sulcular bleeding. In this study, placement of crown margins was one of several parameters that affected gingival health.

  13. A general framework for the evaluation of genetic association studies using multiple marginal models

    DEFF Research Database (Denmark)

    Kitsche, Andreas; Ritz, Christian; Hothorn, Ludwig A.

    2016-01-01

    OBJECTIVE: In this study, we present a simultaneous inference procedure as a unified analysis framework for genetic association studies. METHODS: The method is based on the formulation of multiple marginal models that reflect different modes of inheritance. The basic advantage of this methodology...

  14. Marginal kidney donor

    Directory of Open Access Journals (Sweden)

    Ganesh Gopalakrishnan

    2007-01-01

    Full Text Available Renal transplantation is the treatment of choice for a medically eligible patient with end stage renal disease. The number of renal transplants has increased rapidly over the last two decades. However, the demand for organs has increased even more. This disparity between the availability of organs and waitlisted patients for transplants has forced many transplant centers across the world to use marginal kidneys and donors. We performed a Medline search to establish the current status of marginal kidney donors in the world. Transplant programs using marginal deceased renal grafts is well established. The focus is now on efforts to improve their results. Utilization of non-heart-beating donors is still in a plateau phase and comprises a minor percentage of deceased donations. The main concern is primary non-function of the renal graft apart from legal and ethical issues. Transplants with living donors outnumbered cadaveric transplants at many centers in the last decade. There has been an increased use of marginal living kidney donors with some acceptable medical risks. Our primary concern is the safety of the living donor. There is not enough scientific data available to quantify the risks involved for such donation. The definition of marginal living donor is still not clear and there are no uniform recommendations. The decision must be tailored to each donor who in turn should be actively involved at all levels of the decision-making process. In the current circumstances, our responsibility is very crucial in making decisions for either accepting or rejecting a marginal living donor.

  15. The homogeneous marginal utility of income assumption

    NARCIS (Netherlands)

    Demuynck, T.

    2015-01-01

    We develop a test to verify if every agent from a population of heterogeneous consumers has the same marginal utility of income function. This homogeneous marginal utility of income assumption is often (implicitly) used in applied demand studies because it has nice aggregation properties and

  16. Exactly marginal deformations from exceptional generalised geometry

    Energy Technology Data Exchange (ETDEWEB)

    Ashmore, Anthony [Merton College, University of Oxford,Merton Street, Oxford, OX1 4JD (United Kingdom); Mathematical Institute, University of Oxford,Andrew Wiles Building, Woodstock Road, Oxford, OX2 6GG (United Kingdom); Gabella, Maxime [Institute for Advanced Study,Einstein Drive, Princeton, NJ 08540 (United States); Graña, Mariana [Institut de Physique Théorique, CEA/Saclay,91191 Gif-sur-Yvette (France); Petrini, Michela [Sorbonne Université, UPMC Paris 05, UMR 7589, LPTHE,75005 Paris (France); Waldram, Daniel [Department of Physics, Imperial College London,Prince Consort Road, London, SW7 2AZ (United Kingdom)

    2017-01-27

    We apply exceptional generalised geometry to the study of exactly marginal deformations of N=1 SCFTs that are dual to generic AdS{sub 5} flux backgrounds in type IIB or eleven-dimensional supergravity. In the gauge theory, marginal deformations are parametrised by the space of chiral primary operators of conformal dimension three, while exactly marginal deformations correspond to quotienting this space by the complexified global symmetry group. We show how the supergravity analysis gives a geometric interpretation of the gauge theory results. The marginal deformations arise from deformations of generalised structures that solve moment maps for the generalised diffeomorphism group and have the correct charge under the generalised Reeb vector, generating the R-symmetry. If this is the only symmetry of the background, all marginal deformations are exactly marginal. If the background possesses extra isometries, there are obstructions that come from fixed points of the moment maps. The exactly marginal deformations are then given by a further quotient by these extra isometries. Our analysis holds for any N=2 AdS{sub 5} flux background. Focussing on the particular case of type IIB Sasaki-Einstein backgrounds we recover the result that marginal deformations correspond to perturbing the solution by three-form flux at first order. In various explicit examples, we show that our expression for the three-form flux matches those in the literature and the obstruction conditions match the one-loop beta functions of the dual SCFT.

  17. Ferritin associates with marginal band microtubules

    International Nuclear Information System (INIS)

    Infante, Anthony A.; Infante, Dzintra; Chan, M.-C.; How, P.-C.; Kutschera, Waltraud; Linhartova, Irena; Muellner, Ernst W.; Wiche, Gerhard; Propst, Friedrich

    2007-01-01

    We characterized chicken erythrocyte and human platelet ferritin by biochemical studies and immunofluorescence. Erythrocyte ferritin was found to be a homopolymer of H-ferritin subunits, resistant to proteinase K digestion, heat stable, and contained iron. In mature chicken erythrocytes and human platelets, ferritin was localized at the marginal band, a ring-shaped peripheral microtubule bundle, and displayed properties of bona fide microtubule-associated proteins such as tau. Red blood cell ferritin association with the marginal band was confirmed by temperature-induced disassembly-reassembly of microtubules. During erythrocyte differentiation, ferritin co-localized with coalescing microtubules during marginal band formation. In addition, ferritin was found in the nuclei of mature erythrocytes, but was not detectable in those of bone marrow erythrocyte precursors. These results suggest that ferritin has a function in marginal band formation and possibly in protection of the marginal band from damaging effects of reactive oxygen species by sequestering iron in the mature erythrocyte. Moreover, our data suggest that ferritin and syncolin, a previously identified erythrocyte microtubule-associated protein, are identical. Nuclear ferritin might contribute to transcriptional silencing or, alternatively, constitute a ferritin reservoir

  18. Systematic reviews: I. The correlation between laboratory tests on marginal quality and bond strength. II. The correlation between marginal quality and clinical outcome.

    Science.gov (United States)

    Heintze, Siegward D

    2007-01-01

    An accepted principle in restorative dentistry states that restorations should be placed with the best marginal quality possible to avoid postoperative sensitivity, marginal discoloration, and secondary caries. Different laboratory methods claim to predict the clinical performance of restorative materials, for example, tests of bond strength and microleakage and gap analysis. The purpose of this review was twofold: (1) find studies that correlated the results of bond strength tests with either microleakage or gap analysis for the same materials, and (2) find studies that correlated the results of microleakage and/or gaps with the clinical parameters for the same materials. Furthermore, influencing factors on the results of the laboratory tests were reviewed and assessed. For the first question, searches for studies were conducted in the MEDLINE database and IADR/AADR abtracts online with specific search and inclusion criteria. The outcome for each study was assessed on the basis of the statistical test applied in the study, and finally the number of studies with or without correlation was compiled. For the second question, results of the quantitative marginal analysis of Class V restorations published by the University of Zürich with the same test protocol and prospective clinical trials were searched that investigated the same materials for at least 2 years in Class V cavities. Pearson correlation coefficients were calculated for pooled data of materials and clinical outcome parameters such as retention loss, marginal discoloration, marginal integrity, and secondary caries. For the correlation of dye penetration and clinical outcome, studies on Class V restorations published by the same research institute were searched in MEDLINE that examined the same adhesive systems as the selected clinical trials. For the correlation bond strength/microleakage, 30 studies were included into the review, and for the correlation bond strength/gap analysis 18 studies. For both

  19. On marginal regeneration

    NARCIS (Netherlands)

    Stein, H.N.

    1991-01-01

    On applying the marginal regeneration concept to the drainage of free liquid films, problems are encountered: the films do not show a "neck" of minimum thickness at the film/border transition; and the causes of the direction dependence of the marginal regeneration are unclear. Both problems can be

  20. Analyzing Agricultural Sustainability Indicators,Under Energy Subsidy Reduction Policy(Case Study of Qorveh Plain

    Directory of Open Access Journals (Sweden)

    H. Balali

    2016-03-01

    region, situated in the West of Iran. Materials and Methods: The statistical sample of this research includes all irrigated land of Qorveh as the studied area. A partial equilibrium model has been applied by mathematic programming approach in order to analyze the economic and environmental effects of reduction of energy subsidies for the agriculture sector in the studied area. For this purpose, through a survey, questionnaires were used in order to identify production coefficients of agriculture products and farmers' behavior during 2012-2013. Then relevant equations were used in mathematical programming framework with the aim of maximizing gross margin of agriculture activities in planning horizon by using GAMS 22.9. Results and Discussion: The results showed that by increasing energy price in policy scenarios of ES1 to ES7 the gross margin of agriculture activities decreases. Also, the results indicate that by implementation of scenarios SE1 and SE2, most economical and environmental indicators of agricultural sustainability will be improved and increasing energy prices as the mentioned policy scenarios has the most effect on GM_ELEC , GM_GAS, and NIT_H indicators and reduces them by 10.7%, 0.97% and 1.48%, respectively. In scenarios ES3 to ES5 with respect to scenarios ES1 and ES2, there is only 7% decrease in the NIT_H index. In scenario ES6, which grows electricity cost by 2.25 times and diesel fuel cost by 1.98 times, GM_ELEC, and GM_WA have the maximum decrease, namely 12.66% and 14.47%, respectively and WA_H has reached 9010 which shows an increase of 6.47%. In scenario ES7, with the exception of WA_H, GM_ELEC and GM_GAS other indicators decreased and this shows that the closer we keep to real energy prices, the more improvement we observe in the environmental indicators. Conclusions: Consequently, results showed that the reduction of energy subsidies leads to reductions in economic indicators of the study area, as total gross margins. Also, the results showed

  1. Green tax reform, marginal revenue of wage income taxes, and the wage curve. A brief note

    International Nuclear Information System (INIS)

    Ziesemer, T.

    2002-01-01

    It has been shown elsewhere (Schneider, 1997) that the success of a green tax reform depends crucially on a small slope of the wage curve of an efficiency wage model in which production occurs using a second factor E, energy or emissions. Also elsewhere (Scholz, 1998) it was revealed that there is a second necessary condition that the marginal revenue of the wage income tax is negative. In this note we show that (1) these two conditions are not independent, but rather depend both on the slope of the wage curve; and (2) if Schneider's condition of a sufficiently flat wage curve is fulfilled, marginal revenue of wage income taxes must be negative. By implication, both the green tax reform and the sign of the marginal revenue of wage income taxes depend on the slope of the wage curve which allows to distinguish three cases of a tax reform: (a) a double dividend for a very small slope of the wage curve (Schneider's case); (b) failure of unemployment reduction (Scholz' case) for a very steep wage curve; (c) failure of emission reduction for an intermediate case of a wage curve slope

  2. An Evaluation of Criticality Margin by an Application of Parallelogram Lattice Arrangement in the Nuclear Fuel Storage Rack

    International Nuclear Information System (INIS)

    Kim, Song Hyun; Kim, Hong Chul; Shin, Chang Ho; Kim, Jong Kyung; Kim, Kyo Youn

    2010-01-01

    The criticality evaluation in the nuclear fuel storage rack is essentially required for the prevention of the criticality accident. The square lattice structure of the storage rack is commonly used because it has a simple structure for the storage of the numerous fuel assemblies as well as the good mechanical strength. For the design of the fuel storage rack, the boron plate is commonly used for the criticality reduction. In this study, an arrangement method with the parallelogram lattice structure is proposed for the reduction of the boron concentration or the rack pitch. The criticality margins by the application of the parallelogram lattice were evaluated with MCNP5 code. From the result, the reduction of the boron concentrated in the borated-Al plate was evaluated

  3. Indigenous women's voices: marginalization and health.

    Science.gov (United States)

    Dodgson, Joan E; Struthers, Roxanne

    2005-10-01

    Marginalization may affect health care delivery. Ways in which indigenous women experienced marginalization were examined. Data from 57 indigenous women (18 to 65 years) were analyzed for themes. Three themes emerged: historical trauma as lived marginalization, biculturalism experienced as marginalization, and interacting within a complex health care system. Experienced marginalization reflected participants' unique perspective and were congruent with previous research. It is necessary for health care providers to assess the detrimental impact of marginalization on the health status of individuals and/or communities.

  4. Population and patient-specific target margins for 4D adaptive radiotherapy to account for intra- and inter-fraction variation in lung tumour position

    International Nuclear Information System (INIS)

    Hugo, Geoffrey D; Di Yan; Jian Liang

    2007-01-01

    In this work, five 4D image-guidance strategies (two population, an offline adaptive and two online strategies) were evaluated that compensated for both inter- and intra-fraction variability such as changes to the baseline tumour position and respiratory pattern. None of the strategies required active motion compensation such as gating or tracking; all strategies simulated a free-breathing-based treatment technique. Online kilovoltage fluoroscopy was acquired for eight patients with lung tumours, and used to construct inter- and intra-fraction tumour position variability models. Planning was performed on a mid-ventilation image acquired from a respiration-correlated CT scan. The blurring effect of tumour position variability was included in the dose calculation by convolution. CTV to PTV margins were calculated for variability in the cranio-caudal direction. A population margin of 9.0 ± 0.7 mm was required to account for setup error and respiration in the study population without the use of image-guidance. The greatest mean margin reduction was introduced by the offline adaptive strategy. A daily online correction strategy produced a small reduction (1.6 mm) in the mean margin from the offline strategy. Adaptively correcting for an inter-fraction change in the respiratory pattern had little effect on margin size due to most patients having only small daily changes in the respiratory pattern. A daily online correction strategy would be useful for patients who exhibit large variations in the daily mean tumour position, while an offline adaptive strategy is more applicable to patients with less variation

  5. Effect of MLC Leaf Width and PTV Margin on the Treatment Planning of Intensity-Modulated Stereotactic Radiosurgery (IMSRS) or Radiotherapy (IMSRT)

    International Nuclear Information System (INIS)

    Chang Jenghwa; Yenice, Kamil M.; Jiang Kailiu; Hunt, Margie; Narayana, Ashwatha

    2009-01-01

    We studied the effect of MLC (multileaf collimator) leaf width and PTV (planning target volume) margin on treatment planning of intensity modulated stereotactic radiosurgery (IMSRS) or radiotherapy (IMSRT). Twelve patients previously treated with IMSRS/IMSRT were retrospectively planned with 5- and 3-mm MLC leaf widths and 3- and 2-mm PTV margins using the already contoured clinical target volume and critical structures. The same beam arrangement, planning parameters, and optimization method were used in each of the 4 plans for a given patient. Each plan was normalized so that the prescription dose covered at least 99% of the PTV. Plan indices - D mean (mean dose), conformity index (CI), V 70 (volume receiving ≥ 70% of the prescription dose), and V 50 (volume receiving ≥ 50% of the prescription dose) - were calculated from the dose-volume histograms (DVHs) of the PTV, normal tissue, and organs at risk (OARs). Hypothesis testing was performed on the mean ratios of plan indices to determine the statistical significance of the relative differences. The PTV was well covered for all plans, as no significant differences were observed for D 95 , V 95 , D max , D min , and D mean of the PTV. The irradiated volume was ∼23% smaller when 2-mm instead of 3-mm PTV margin was used, but it was only reduced by ∼6% when the MLC leaf width was reduced from 5 mm to 3 mm. For normal tissue and brainstem, V 70 , V 50 , and D mean were reduced more effectively by a decrease in MLC width, while D mean of optic nerve and chiasm were more sensitive to a change in PTV margin. The DVH statistics for the PTV and normal structures from the treatment plan with 5-mm MLC and 2-mm PTV margin were equal to those with 3-mm MLC and 3-mm PTV margin. PTV margin reduction is more effective in sparing the normal tissue and OARs than a reduction in MLC leaf width. For IMSRS, where highly accurate setup and small PTV margins are routinely employed, the use of 5-mm MLC is therefore less desirable.

  6. Refining margins and prospects

    International Nuclear Information System (INIS)

    Baudouin, C.; Favennec, J.P.

    1997-01-01

    Refining margins throughout the world have remained low in 1996. In Europe, in spite of an improvement, particularly during the last few weeks, they are still not high enough to finance new investments. Although the demand for petroleum products is increasing, experts are still sceptical about any rapid recovery due to prevailing overcapacity and to continuing capacity growth. After a historical review of margins and an analysis of margins by regions, we analyse refining over-capacities in Europe and the unbalances between production and demand. Then we discuss the current situation concerning barriers to the rationalization, agreements between oil companies, and the consequences on the future of refining capacities and margins. (author)

  7. Safety margins in deterministic safety analysis

    International Nuclear Information System (INIS)

    Viktorov, A.

    2011-01-01

    The concept of safety margins has acquired certain prominence in the attempts to demonstrate quantitatively the level of the nuclear power plant safety by means of deterministic analysis, especially when considering impacts from plant ageing and discovery issues. A number of international or industry publications exist that discuss various applications and interpretations of safety margins. The objective of this presentation is to bring together and examine in some detail, from the regulatory point of view, the safety margins that relate to deterministic safety analysis. In this paper, definitions of various safety margins are presented and discussed along with the regulatory expectations for them. Interrelationships of analysis input and output parameters with corresponding limits are explored. It is shown that the overall safety margin is composed of several components each having different origins and potential uses; in particular, margins associated with analysis output parameters are contrasted with margins linked to the analysis input. While these are separate, it is possible to influence output margins through the analysis input, and analysis method. Preserving safety margins is tantamount to maintaining safety. At the same time, efficiency of operation requires optimization of safety margins taking into account various technical and regulatory considerations. For this, basic definitions and rules for safety margins must be first established. (author)

  8. Effect of protective coating on marginal integrity of nanohybrid composite during bleaching with carbamide peroxide: A microleakage study.

    Science.gov (United States)

    Kumar, A Ashok; Hariharavel, V P; Narayanan, Ashwin; Murali, S

    2015-01-01

    The aim of the study was to evaluate the microleakage on the marginal integrity of nanohybrid composite during bleaching with carbamide peroxide after applying a protective coating of G-Coat plus (GC, Japan). Class V cavities were prepared and restored with nanohybrid composite restoration in 60 freshly extracted noncarious premolars extracted for orthodontic reasons. Then they were divided into 3 groups. Group 1 - bleaching with carbamide peroxide without G coat plus (n = 20), Group 2 - bleaching with carbamide peroxide with G-Coat plus (n = 20), Group 3 - without bleaching procedure (n = 20) (control group). In Group 2, G coat plus was applied over the restorative surface and margins. Then all teeth in Groups 1 and 2 were taken and mounted in dental stone. Bleaching trays were custom fabricated over the cast with the help of a heated vacuum-forming machine. 10% carbamide peroxide (opalescence PF) was applied over the tooth, and the bleaching process was done for about 2 weeks. Then all samples underwent thermocycling and were then immersed in the 2% methylene blue solution for 24 h and observed under a stereomicroscope to evaluate the amount of dye penetration. Data were compared using Kruskal-Wallis test and Mann-Whitney test using SPSS Inc.; Chicago, IL, USA, Version 17.0. Mann-Whitney test shows that the difference in microleakage between Group 1-Group 2 and Group 2-Group 3 is statistically significant (P < 0.05). Significant reduction in microleakage was seen in Group 2 when compared to other groups.

  9. Marginal Models for Categorial Data

    NARCIS (Netherlands)

    Bergsma, W.P.; Rudas, T.

    2002-01-01

    Statistical models defined by imposing restrictions on marginal distributions of contingency tables have received considerable attention recently. This paper introduces a general definition of marginal log-linear parameters and describes conditions for a marginal log-linear parameter to be a smooth

  10. Comparison of Intraocular Pressure Reduction of Initial and Adjunct ...

    African Journals Online (AJOL)

    Conclusion: Initial SLT showed a sustained reduction in IOP, compared to adjunct with marginally lower ... of reducing exposure to benzalkonium chloride is by substituting some of the ... in which the trabecular meshwork is targeted using.

  11. Marginal cost curves for water footprint reduction in irrigated agriculture : Guiding a cost-effective reduction of crop water consumption to a permit or benchmark level

    NARCIS (Netherlands)

    Chukalla, Abebe D.; Krol, Maarten S.; Hoekstra, Arjen Y.

    2017-01-01

    Reducing the water footprint (WF) of the process of growing irrigated crops is an indispensable element in water management, particularly in water-scarce areas. To achieve this, information on marginal cost curves (MCCs) that rank management packages according to their cost-effectiveness to reduce

  12. Estimating marginal CO2 emissions rates for national electricity systems

    International Nuclear Information System (INIS)

    Hawkes, A.D.

    2010-01-01

    The carbon dioxide (CO 2 ) emissions reduction afforded by a demand-side intervention in the electricity system is typically assessed by means of an assumed grid emissions rate, which measures the CO 2 intensity of electricity not used as a result of the intervention. This emissions rate is called the 'marginal emissions factor' (MEF). Accurate estimation of MEFs is crucial for performance assessment because their application leads to decisions regarding the relative merits of CO 2 reduction strategies. This article contributes to formulating the principles by which MEFs are estimated, highlighting the strengths and weaknesses in existing approaches, and presenting an alternative based on the observed behaviour of power stations. The case of Great Britain is considered, demonstrating an MEF of 0.69 kgCO 2 /kW h for 2002-2009, with error bars at +/-10%. This value could reduce to 0.6 kgCO 2 /kW h over the next decade under planned changes to the underlying generation mix, and could further reduce to approximately 0.51 kgCO 2 /kW h before 2025 if all power stations commissioned pre-1970 are replaced by their modern counterparts. Given that these rates are higher than commonly applied system-average or assumed 'long term marginal' emissions rates, it is concluded that maintenance of an improved understanding of MEFs is valuable to better inform policy decisions.

  13. Economic Analysis of Nitrate Source Reductions in California Agriculture

    Science.gov (United States)

    Medellin-Azuara, J.; Howitt, R.; Rosenstock, T.; Harter, T.; Pettygrove, S. G.; Dzurella, K.; Lund, J. R.

    2011-12-01

    We present an analytical approach to assess the economic impact of improving nitrogen management practices in California agriculture. We employ positive mathematical programming to calibrate crop production to base input information. The production function representation is a nested constant elasticity of substitution with two nests: one for applied water and one for applied nitrogen. The first nest accounts for the tradeoffs between irrigation efficiency and capital investments in irrigation technology. The second nest represents the tradeoffs between nitrogen application efficiency and the marginal costs of improving nitrogen efficiency. In the production function nest, low elasticities of substitution and water and nitrogen stress constraints keep agricultural crop yields constant despite changes in nitrogen management practices. We use the Tulare Basin, and the Salinas Valley in California's Central Valley and Central Coast respectively as our case studies. Preliminary results show that initial reductions of 25% in nitrogen loads to groundwater may not impose large costs to agricultural crop production as substitution of management inputs results in only small declines in net revenue from farming and total land use. Larger reductions in the nitrogen load to groundwater of 50% imposes larger marginal costs for better nitrogen management inputs and reductions in the area of lower valued crops grown in the study areas. Despite the shortage of data on quantitative effects of improved nitrogen efficiency; our results demonstrate the potential of combining economic and agronomic data into a model that can reflect differences in cost and substitutabilty in nitrogen application methods, that can be used to reduce the quantity of nitrogen leaching into groundwater.

  14. Modifications of the alpha,beta-double bond in chalcones only marginally affect the antiprotozoal activities

    DEFF Research Database (Denmark)

    Nielsen, S F; Kharazmi, A; Christensen, S B

    1998-01-01

    Methods for selective alkylation of chalcones in the alpha- or beta-position and for selective reduction of the alpha,beta-double bond have been developed. The antiparasitic potencies of the alpha,beta-double bond modified chalcones only differ marginally from the potencies of the parent chalcones...

  15. Fracture Resistance of Implant Abutments Following Abutment Alterations by Milling the Margins: An In Vitro Study.

    Science.gov (United States)

    Patankar, Anuya; Kheur, Mohit; Kheur, Supriya; Lakha, Tabrez; Burhanpurwala, Murtuza

    2016-12-01

    This in vitro study evaluated the effect of different levels of preparation of an implant abutment on its fracture resistance. The study evaluated abutments that incorporated a platform switch (Myriad Plus Abutments, Morse Taper Connection) and Standard abutments (BioHorizons Standard Abutment, BioHorizons Inc). Each abutment was connected to an appropriate implant and mounted in a self-cured resin base. Based on the abutment preparation depths, 3 groups were created for each abutment type: as manufactured, abutment prepared 1 mm apical to the original margin, and abutment prepared 1.5 mm to the original margin. All the abutments were prepared in a standardized manner to incorporate a 0.5 mm chamfer margin uniformly. All the abutments were torqued to 30 Ncm on their respective implants. They were then subjected to loading until failure in a universal testing machine. Abutments with no preparation showed the maximum resistance to fracture for both groups. As the preparation depth increased, the fracture resistance decreased. The fracture resistance of implant abutment junction decreases as the preparation depth increases.

  16. Health and indigenous people: intercultural health as a new paradigm toward the reduction of cultural and social marginalization?

    Science.gov (United States)

    Torri, Maria Costanza

    2010-01-01

    The precarious socio-economic and health conditions of indigenous populations legitimize claims of marginalization and attest to the inherent inequality that indigenous groups suffer. In the last few years, advocates have urged the use of traditional indigenous health practices as more culturally fitting for most indigenous populations. An intercultural health program can reduce the conditions of social and cultural marginalization in an indigenous population. However, accepting and integrating indigenous medicine into a westernized health system presents a major challenge to intercultural healthcare in Latin America. The objective of this paper is to analyze the case of Makewe hospital, one of the first and few examples of intercultural health initiatives in Chile. The paper will examine the implementation of this initiative and the main challenges in creating an effective intercultural health program.

  17. Marginal Accuracy and Internal Fit of Dental Copings Fabricated by Modern Additive and Subtractive Digital Technologies.

    Science.gov (United States)

    Nelson, Neha; K S, Jyothi; Sunny, Kiran

    2017-03-01

    The margins of copings for crowns and retainers of fixed partial dentures affect the progress of microleakage and dental caries. Failures occur due to altered fit which is also influenced by the method of fabrication. An in-vitro study was conducted to determine among the cast base metal, copy milled zirconia, computer aided designing computer aided machining/manufacturing zirconia and direct metal laser sintered copings which showed best marginal accuracy and internal fit. Forty extracted maxillary premolars were mounted on an acrylic model and reduced occlusally using a milling machine up to a final tooth height of 4 mm from the cementoenamel junction. Axial reduction was accomplished on a surveyor and a chamfer finish line was given. The impressions and dies were made for fabrication of copings which were luted on the prepared teeth under standardized loading, embedded in self-cure acrylic resin, sectioned and observed using scanning electron microscope for internal gap and marginal accuracy. The copings fabricated using direct metal laser sintering technique exhibited best marginal accuracy and internal fit. Comparison of mean between the four groups by ANOVA and post-hoc Tukey HSD tests showed a statistically significant difference between all the groups (p⟨0.05). It was concluded that the copings fabricated using direct metal laser sintering technique exhibited best marginal accuracy and internal fit. Additive digital technologies such as direct metal laser sintering could be cost-effective for the clinician, minimize failures related to fit and increase longevity of teeth and prostheses. Copyright© 2017 Dennis Barber Ltd.

  18. Marginal Productivity Gained Through Prefabrication: Case Studies of Building Projects in Auckland

    Directory of Open Access Journals (Sweden)

    Wajiha Shahzad

    2015-02-01

    Full Text Available Several studies have documented benefits of prefabrication system (prefab compared to the traditional building system (TBS. However, the documented benefits have been anecdotal or fragmented with reports of isolated case study projects. Few studies have looked at the objectively quantified benefits from statistical significance point of view and across building types in New Zealand. This study contributes to filling this knowledge gap by analyzing cost and time-savings, and productivity improvement achievable by the use of prefab in place of the TBS. Records of completion times and final contract values of 66 building projects implemented using prefab in Auckland were collected. The building types included commercial, houses, apartments, educational, and community buildings. The project details included final contract sums, completion dates, gross floor areas, and number of floors. Based on these details, the equivalent completion times and the final cost estimates for similar buildings implemented using the TBS were obtained from the Rawlinsons construction data handbook and feedback from some designers and contractors. Marginal productivity outcome for each building project was computed as the product of the cost and time-savings achieved using the prefab. Results showed that the use of prefab in place of TBS resulted in 34% and 19% average reductions in the completion times and costs, respectively. This also translated to overall 7% average improvement in the productivity outcomes in the building projects. Univariate ANOVA-based hypothesis test results showed that ‘building type’ had no significant effects on the cost and productivity improvement outcomes, but had significant effect on the time savings analyzed in the case study projects. The greatest productivity gain of 11% was achieved in house projects. These evidence-based results could guide optimized use of prefab for specific building application. The hypothesis-testing outcome

  19. External beam radiotherapy of localized prostatic adenocarcinoma. Evaluation of conformal therapy, field number and target margins

    International Nuclear Information System (INIS)

    Lennernaes, B.; Rikner, G.; Letocha, H.; Nilsson, S.

    1995-01-01

    The purpose of the present study was to identify factors of importance in the planning of external beam radiotherapy of prostatic adenocarcinoma. Seven patients with urogenital cancers were planned for external radiotherapy of the prostate. Four different techniques were used, viz. a 4-field box technique and four-, five- or six-field conformal therapy set-ups combined with three different margins (1-3 cm). The evaluations were based on the doses delivered to the rectum and the urinary bladder. A normal tissue complication probability (NTCP) was calculated for each plan using Lyman's dose volume reduction method. The most important factors that resulted in a decrease of the dose delivered to the rectum and the bladder were the use of conformal therapy and smaller margins. Conformal therapy seemed more important for the dose distribution in the urinary bladder. Five- and six-field set-ups were not significantly better than those with four fields. NTCP calculations were in accordance with the evaluation of the dose volume histograms. To conclude, four-field conformal therapy utilizing reduced margins improves the dose distribution to the rectum and the urinary bladder in the radiotherapy of prostatic adenocarcinoma. (orig.)

  20. Preoperative imaging and surgical margins in maxillectomy patients

    NARCIS (Netherlands)

    Kreeft, Anne Marijn; Smeele, Ludwig E.; Rasch, Coen R. N.; Hauptmann, Michael; Rietveld, Derk H. F.; Leemans, C. René; Balm, Alfons J. M.

    2012-01-01

    Background High rates of positive surgical margins are reported after a maxillectomy. A large part of tumors that are preoperatively considered operable can thus not be resected with tumor-free margins. Methods This was a retrospective study on medical files of 69 patients that underwent

  1. Evaluation of concordance between CAD/CAM and clinical positions of abutment shoulder against mucosal margin: an observational study.

    Science.gov (United States)

    Pietruski, Jan K; Skurska, Anna; Bernaczyk, Anna; Milewski, Robert; Pietruska, Maria Julia; Gehrke, Peter; Pietruska, Małgorzata D

    2018-05-02

    While working on CAD/CAM-customized abutments, the use of standard impression copings with a circular diameter produces inconsistency within the emergence profile. It may begin with a collapse of the supra-implant mucosa during impression taking, then lead to a computer-generated mismatch of the position and outline of the abutment shoulder, and consequently result in a compromised outcome of anticipated treatment. The aim of the study was to compare the virtual and clinical positions of the abutment shoulder in relation to the mucosal margin after the abutment delivery. Conventional open-tray impression takings followed uncovering surgery. Master casts were scanned with a desktop scanner. Clinical examinations took place after abutment's insertion and temporization (T1) and prior to cementation of the definitive crown (T2). The distances between the abutment shoulder and marginal soft tissue were measured intraorally in four aspects and juxtaposed with those on the virtual model. The study evaluated 257 dental implants and CAD/CAM-customized abutments. As T1 and T2 showed, there was a positive correlation between the virtually designed abutment shoulder position and matching clinical location relative to the mucosal margin. In 42.1% of cases, the distance between the mucosal margin and the abutment shoulder did not change. It increased in 36.3% of cases while a decrease occurred in 21.6% of them. Computer-set position of the abutment shoulder in relation to the mucosal margin can be predictably implemented in clinical practice.

  2. Study on structural seismic margin and probabilistic seismic risk. Development of a structural capacity-seismic risk diagram

    International Nuclear Information System (INIS)

    Nakajima, Masato; Ohtori, Yasuki; Hirata, Kazuta

    2010-01-01

    Seismic margin is extremely important index and information when we evaluate and account seismic safety of critical structures, systems and components quantitatively. Therefore, it is required that electric power companies evaluate the seismic margin of each plant in back-check of nuclear power plants in Japan. The seismic margin of structures is usually defined as a structural capacity margin corresponding to design earthquake ground motion. However, there is little agreement as to the definition of the seismic margin and we have no knowledge about a relationship between the seismic margin and seismic risk (annual failure probability) which is obtained in PSA (Probabilistic Safety Assessment). The purpose of this report is to discuss a definition of structural seismic margin and to develop a diagram which can identify a relation between seismic margin and seismic risk. The main results of this paper are described as follows: (1) We develop seismic margin which is defined based on the fact that intensity of earthquake ground motion is more appropriate than the conventional definition (i.e., the response-based seismic margin) for the following reasons: -seismic margin based on earthquake ground motion is invariant where different typed structures are considered, -stakeholders can understand the seismic margin based on the earthquake ground motion better than the response-based one. (2) The developed seismic margin-risk diagram facilitates us to judge easily whether we need to perform detailed probabilistic risk analysis or only deterministic analysis, given that the reference risk level although information on the uncertainty parameter beta is not obtained. (3) We have performed numerical simulations based on the developed method for four sites in Japan. The structural capacity-risk diagram differs depending on each location because the diagram is greatly influenced by seismic hazard information for a target site. Furthermore, the required structural capacity

  3. Risk Informed Safety Margin Characterization Case Study: Selection of Electrical Equipment To Be Subjected to Environmental Qualification

    Energy Technology Data Exchange (ETDEWEB)

    D. Blanchard; R. Youngblood

    2012-04-01

    In general, the margins-based safety case helps the decision-maker manage plant margins most effectively. It tells the plant decision-maker such things as what margin is present (at the plant level, at the functional level, at the barrier level, at the component level), and where margin is thin or perhaps just degrading. If the plant is safe, it tells the decision-maker why the plant is safe and where margin needs to be maintained, and perhaps where the plant can afford to relax.

  4. Task Group on Safety Margins Action Plan (SMAP). Safety Margins Action Plan - Final Report

    International Nuclear Information System (INIS)

    Hrehor, Miroslav; Gavrilas, Mirela; Belac, Josef; Sairanen, Risto; Bruna, Giovanni; Reocreux, Michel; Touboul, Francoise; Krzykacz-Hausmann, B.; Park, Jong Seuk; Prosek, Andrej; Hortal, Javier; Sandervaag, Odbjoern; Zimmerman, Martin

    2007-01-01

    The international nuclear community has expressed concern that some changes in existing plants could challenge safety margins while fulfilling all the regulatory requirements. In 1998, NEA published a report by the Committee on Nuclear Regulatory Activities on Future Nuclear Regulatory Challenges. The report recognized 'Safety margins during more exacting operating modes' as a technical issue with potential regulatory impact. Examples of plant changes that can cause such exacting operating modes include power up-rates, life extension or increased fuel burnup. In addition, the community recognized that the cumulative effects of simultaneous changes in a plant could be larger than the accumulation of the individual effects of each change. In response to these concerns, CSNI constituted the safety margins action plan (SMAP) task group with the following objectives: 'To agree on a framework for integrated assessments of the changes to the overall safety of the plant as a result of simultaneous changes in plant operation / condition; To develop a CSNI document which can be used by member countries to assess the effect of plant change on the overall safety of the plant; To share information and experience.' The two approaches to safety analysis, deterministic and probabilistic, use different methods and have been developed mostly independently of each other. This makes it difficult to assure consistency between them. As the trend to use information on risk (where the term risk means results of the PSA/PRA analysis) to support regulatory decisions is growing in many countries, it is necessary to develop a method of evaluating safety margin sufficiency that is applicable to both approaches and, whenever possible, integrated in a consistent way. Chapter 2 elaborates on the traditional view of safety margins and the means by which they are currently treated in deterministic analyses. This chapter also discusses the technical basis for safety limits as they are used today

  5. Helping Students on the Margin Succeed in Schools.

    Science.gov (United States)

    Langenfeld, Michelle Schoen; Cumming, Brenda

    1996-01-01

    Addresses how Apple Valley High School (Minnesota) has been able to help marginal students succeed in school. The fundamental actions that contributed to the effectiveness of study-team efforts to help marginal students are discussed, and what has been learned through these efforts is considered. (GR)

  6. Evaluation of the setup margins for cone beam computed tomography–guided cranial radiosurgery: A phantom study

    Energy Technology Data Exchange (ETDEWEB)

    Calvo Ortega, Juan Francisco, E-mail: jfcdrr@yahoo.es [Department of Radiation Oncology, Hospital Quirón, Barcelona (Spain); Wunderink, Wouter [Department of Radiotherapy, Erasmus MC Cancer Institute, University Medical Center Rotterdam, Rotterdam (Netherlands); Delgado, David; Moragues, Sandra; Pozo, Miquel; Casals, Joan [Department of Radiation Oncology, Hospital Quirón, Barcelona (Spain)

    2016-10-01

    The aim of this study is to evaluate the setup margins from the clinical target volume (CTV) to planning target volume (PTV) for cranial stereotactic radiosurgery (SRS) treatments guided by cone beam computed tomography (CBCT). We designed an end-to-end (E2E) test using a skull phantom with an embedded 6mm tungsten ball (target). A noncoplanar plan was computed (E2E plan) to irradiate the target. The CBCT-guided positioning of the skull phantom on the linac was performed. Megavoltage portal images were acquired after 15 independent deliveries of the E2E plan. The displacement 2-dimensional (2D) vector between the centers of the square field and the ball target on each portal image was used to quantify the isocenter accuracy. Geometrical margins on each patient's direction (left-right or LR, anterior-posterior or AP, superior-inferior or SI) were calculated. Dosimetric validation of the margins was performed in 5 real SRS cases: 3-dimesional (3D) isocenter deviations were mimicked, and changes in CTV dose coverage and organs-at-risk (OARs) dosage were analyzed. The CTV-PTV margins of 1.1 mm in LR direction, and 0.7 mm in AP and SI directions were derived from the E2E tests. The dosimetric analysis revealed that a 1-mm uniform margin was sufficient to ensure the CTV dose coverage, without compromising the OAR dose tolerances. The effect of isocenter uncertainty has been estimated to be 1 mm in our CBCT-guided SRS approach.

  7. Influence of surgical and prosthetic techniques on marginal bone loss around titanium implants. Part I: immediate loading in fresh extraction sockets.

    Science.gov (United States)

    Berberi, Antoine N; Tehini, Georges E; Noujeim, Ziad F; Khairallah, Alexandre A; Abousehlib, Moustafa N; Salameh, Ziad A

    2014-10-01

    Delayed placement of implant abutments has been associated with peri-implant marginal bone loss; however, long-term results obtained by modifying surgical and prosthetic techniques after implant placement are still lacking. This study aimed to evaluate the marginal bone loss around titanium implants placed in fresh extraction sockets using two loading protocols after a 5-year follow-up period. A total of 36 patients received 40 titanium implants (Astra Tech) intended for single-tooth replacement. Implants were immediately placed into fresh extraction sockets using either a one-stage (immediate loading by placing an interim prosthesis into functional occlusion) or a two-stage prosthetic loading protocol (insertion of abutments after 8 weeks of healing time). Marginal bone levels relative to the implant reference point were evaluated at four time intervals using intraoral radiographs: at time of implant placement, and 1, 3, and 5 years after implant placement. Measurements were obtained from mesial and distal surfaces of each implant (α = 0.05). One-stage immediate implant placement into fresh extraction sockets resulted in a significant reduction in marginal bone loss (p sockets reduced marginal bone loss and did not compromise the success rate of the restorations. © 2014 by the American College of Prosthodontists.

  8. Morphology and tectonics of Mahanadi Basin, northeastern continental margin of India from geophysical studies

    Digital Repository Service at National Institute of Oceanography (India)

    Subrahmanyam, V.; Subrahmanyam, A.S.; Murty, G.P.S.; Murthy, K.S.R.

    the breakup of India from Antarctica. The model studies suggest that the northern part of the 85 degrees E Ridge abuts the coast at Chilika Lake. The shape of 2000 m isobath over the northeastern continental margin of India closely resembles to that of 2000 m...

  9. Principals' Perceived Supervisory Behaviors Regarding Marginal Teachers in Two States

    Science.gov (United States)

    Range, Bret; Hewitt, Paul; Young, Suzie

    2014-01-01

    This descriptive study used an online survey to determine how principals in two states viewed the supervision of marginal teachers. Principals ranked their own evaluation of the teacher as the most important factor when identifying marginal teachers and relied on informal methods to diagnose marginal teaching. Female principals rated a majority of…

  10. Development of the Canadian Marginalization Index: a new tool for the study of inequality.

    Science.gov (United States)

    Matheson, Flora I; Dunn, James R; Smith, Katherine L W; Moineddin, Rahim; Glazier, Richard H

    2012-04-30

    Area-based measures of socio-economic status are increasingly used in population health research. Based on previous research and theory, the Canadian Marginalization Index (CAN-Marg) was created to reflect four dimensions of marginalization: residential instability, material deprivation, dependency and ethnic concentration. The objective of this paper was threefold: to describe CAN-Marg; to illustrate its stability across geographic area and time; and to describe its association with health and behavioural problems. CAN-Marg was created at the dissemination area (DA) and census tract level for census years 2001 and 2006, using factor analysis. Descriptions of 18 health and behavioural problems were selected using individual-level data from the Canadian Community Health Survey (CCHS) 3.1 and 2007/08. CAN-Marg quintiles created at the DA level (2006) were assigned to individual CCHS records. Multilevel logistic regression modeling was conducted to examine associations between marginalization and CCHS health and behavioural problems. The index demonstrated marked stability across time and geographic area. Each of the four dimensions showed strong and significant associations with the selected health and behavioural problems, and these associations differed depending on which of the dimensions of marginalization was examined. CAN-Marg is a census-based, empirically derived and theoretically informed tool designed to reflect a broader conceptualization of Canadian marginalization.

  11. The clinical study of the early soft tissue healing and marginal bone resorption after non-submerged implants

    International Nuclear Information System (INIS)

    Xu Anchen; Yang Desheng; Hu Bei; Leng Bin; Zhang Li

    2009-01-01

    Objective: To compare the amount of early marginal bone resorption in the first three months after non-submerged implants and to explore the relationship between the amount of early marginal bone resorption and the soft tissue healing in the first month. Method: ITI with non-submerged implants were implanted in 33 patients. Digital panoramic radiographs were taken during the operation, one month and three months later. The amount of marginal bone resorption was measured in the first, second and the third month after implant operation. The soft tissue healing was observed after 10 days. Results: There was significant difference (P<0.01) in the amount of early marginal bone resorption between one month and three months later. The early marginal bone resorption in the first month after implantation kept correlation with the soft tissue healing on 10th day(r=0.794, P<0.01). Conclusion: The amount of early marginal bone resorption in the first month exceeds that in the second and the third months after implant operation, and the soft tissue healing affects the amount of early marginal bone resorption in the first month. Biological seal is the critical factor influencing the early marginal bone resorption. (authors)

  12. Margin improvement initiatives: realistic approaches

    Energy Technology Data Exchange (ETDEWEB)

    Chan, P.K.; Paquette, S. [Royal Military College of Canada, Chemistry and Chemical Engineering Dept., Kingston, ON (Canada); Cunning, T.A. [Department of National Defence, Ottawa, ON (Canada); French, C.; Bonin, H.W. [Royal Military College of Canada, Chemistry and Chemical Engineering Dept., Kingston, ON (Canada); Pandey, M. [Univ. of Waterloo, Waterloo, ON (Canada); Murchie, M. [Cameco Fuel Manufacturing, Port Hope, ON (Canada)

    2014-07-01

    With reactor core aging, safety margins are particularly tight. Two realistic and practical approaches are proposed here to recover margins. The first project is related to the use of a small amount of neutron absorbers in CANDU Natural Uranium (NU) fuel bundles. Preliminary results indicate that the fuelling transient and subsequent reactivity peak can be lowered to improve the reactor's operating margins, with minimal impact on burnup when less than 1000 mg of absorbers is added to a fuel bundle. The second project involves the statistical analysis of fuel manufacturing data to demonstrate safety margins. Probability distributions are fitted to actual fuel manufacturing datasets provided by Cameco Fuel Manufacturing, Inc. They are used to generate input for ELESTRES and ELOCA. It is found that the fuel response distributions are far below industrial failure limits, implying that margin exists in the current fuel design. (author)

  13. Comparative study on the tensile bond strength and marginal fit of complete veneer cast metal crowns using various luting agents: An in vitro study

    Directory of Open Access Journals (Sweden)

    B Devi Parameswari

    2016-01-01

    Full Text Available Introduction: Several commercially available luting agents are used to cement the dental restorations such as intra-coronal, extra-coronal, and fixed partial dentures. Tensile bond strength (TBS and accurate marginal fit are the essential factors to determine the good clinical results in fixed prosthesis. The retentivity of the luting cements is assessed by their adhesive capacity over the tooth surface and metal surface. Generally, the adhesive ability has been evaluated with in vitro testing, with tensile bond tests. The failure of fixed prosthesis may be happened as a result of incomplete seating during cementation. Most research on cementation of crowns relates seating failure to the thickness of the cement film. Materials and Methods: The study is divided into four groups with 10 samples for each of the luting cement taken up for testing TBS and four groups with 5 samples for each luting agent chosen for assessing marginal fit. The results were tabulated and statistically analyzed. Results: In this in vitro study, the TBS of luting cements, and marginal fit in relation to luting cements were tested by using appropriate testing devices. The TBS of cement is measured using universal testing machine, and the results are tabulated. The marginal gap that exists between the margin of the cast metal crown, and the finish line is measured using travelling microscope before and after cementation. The difference between these two values gives the discrepancy that is due to the film thickness of cement used for luting the restoration. Summary and Conclusion: The TBS value of zinc phosphate cement and glass ionomer cement were found to be almost same. The chemical adhesiveness of the glass ionomer with calcium ions of enamel and dentin may be the attributed reason (ionic bonding. In this study, the polycarboxylate is the one that showed low TBS, and it may be attributed to the weakness of the cement due to reduced film thickness, though this cement has

  14. Influence of Crack Morphology on Leak Before Break Margins

    International Nuclear Information System (INIS)

    Weilin Zang

    2007-11-01

    The purpose of the project is to evaluate the deterministic LBB-margins for different pipe systems in a Swedish PWR-plant and using different crack morphology parameters. Results: - The influence of crack morphology on Leak Before Break (LBB) margins is studied. The subject of the report is a number of LBB-submittals to SKI where deterministic LBB-margins are reported. These submittals typically uses a surface roughness of 0.0762 mm (300 microinch) and number of turns equal to zero and an in-house code for the leak rate evaluations. The present report has shown that these conditions give the largest LBB-margins both in terms of the quotient between the critical crack length and the leakage crack size and for the leak rate margin. - Crack morphology parameters have a strong influence on the leak rate evaluations. Using the SQUIRT code and more recent recommendations for crack morphology parameters, it is shown that in many cases the evaluated margins, using 1 gpm as the reference leak rate detection limit, are below the safety factor of 2 on crack size and 10 on leak rate, which is generally required for LBB approval. - The effect of including weld residual stresses on the LBB margins is also investigated. It is shown that for the two examples studied, weld residual stresses were important for the small diameter thin wall pipe whereas it was negligible for the large diameter thick wall pipe which had a self-balanced weld residual stress distribution

  15. Intraoperative monitoring of marginal mandibular nerve during neck dissection.

    Science.gov (United States)

    Tirelli, Giancarlo; Bergamini, Pier Riccardo; Scardoni, Alessandro; Gatto, Annalisa; Boscolo Nata, Francesca; Marcuzzo, Alberto Vito

    2018-05-01

    The purpose of this study was to assess the efficacy of intraoperative nerve integrity monitoring (NIM) to prevent marginal mandibular nerve injuries during neck dissection. This prospective study compared 36 patients undergoing NIM-assisted neck dissection from July 2014 to March 2015 to a cohort of 35 patients subjected to neck dissection over an identical period of time before the technique was introduced. We also assessed possible correlations between marginal mandibular nerve injuries and other factors, such as anthropometric measurements, presence of clinical neck metastases, type of neck dissection, and site of primary tumor. The incidence of marginal mandibular nerve paralyses was significantly lower among the group of patients undergoing NIM-assisted neck dissection (P = .021). There was no significant difference in the duration of the procedure, and the technique resulted in a limited increase of cost. No other factor seemed to influence the onset of marginal mandibular nerve palsy. In our opinion, NIM is a valuable aid for preventing marginal mandibular nerve injuries during neck dissection. © 2018 Wiley Periodicals, Inc.

  16. A comparative evaluation of the marginal accuracy of crowns fabricated from four commercially available provisional materials: An in vitro study

    Science.gov (United States)

    Amin, Bhavya Mohandas; Aras, Meena Ajay; Chitre, Vidya

    2015-01-01

    Purpose: The purpose of this in vitro study was to evaluate and compare the primary marginal accuracy of four commercially available provisional materials (Protemp 4, Luxatemp Star, Visalys Temp and DPI tooth moulding powder and liquid) at 2 time intervals (10 and 30 min). Materials and Methods: A customized stainless steel master model containing two interchangeable dies was used for fabrication of provisional crowns. Forty crowns (n = 10) were fabricated, and each crown was evaluated under a stereomicroscope. Vertical marginal discrepancies were noted and compared at 10 min since the start of mixing and then at 30 min. Observations and Results: Protemp 4 showed the least vertical marginal discrepancy (71.59 μ), followed by Luxatemp Star (91.93 μ) at 10 min. DPI showed a marginal discrepancy of 95.94 μ while Visalys Temp crowns had vertical marginal discrepancy of 106.81 μ. There was a significant difference in the marginal discrepancy values of Protemp 4 and Visalys Temp. At 30 min, there was a significant difference between the marginal discrepancy of Protemp 4 crowns (83.11 μ) and Visalys Temp crowns (128.97 μ) and between Protemp 4 and DPI (118.88 μ). No significant differences were observed between Protemp 4 and Luxatemp Star. Conclusion: The vertical marginal discrepancy of temporary crowns fabricated from the four commercially available provisional materials ranged from 71 to 106 μ immediately after fabrication (at 10 min from the start of mix) to 83–128 μ (30 min from the start of mix). The time elapsed after mixing had a significant influence on the marginal accuracy of the crowns. PMID:26097348

  17. Refining margins: recent trends

    International Nuclear Information System (INIS)

    Baudoin, C.; Favennec, J.P.

    1999-01-01

    Despite a business environment that was globally mediocre due primarily to the Asian crisis and to a mild winter in the northern hemisphere, the signs of improvement noted in the refining activity in 1996 were borne out in 1997. But the situation is not yet satisfactory in this sector: the low return on invested capital and the financing of environmental protection expenditure are giving cause for concern. In 1998, the drop in crude oil prices and the concomitant fall in petroleum product prices was ultimately rather favorable to margins. Two elements tended to put a damper on this relative optimism. First of all, margins continue to be extremely volatile and, secondly, the worsening of the economic and financial crisis observed during the summer made for a sharp decline in margins in all geographic regions, especially Asia. Since the beginning of 1999, refining margins are weak and utilization rates of refining capacities have decreased. (authors)

  18. Margins in breast conserving surgery: The financial cost & potential savings associated with the new margin guidelines.

    Science.gov (United States)

    Singer, Lauren; Brown, Eric; Lanni, Thomas

    2016-08-01

    In this study, we compare the indications for re-excision, the findings of additional tumor in the re-excision specimen as they relate to margin status, and costs associated with re-excision based on recent new consensus statements. A retrospective analysis was performed on 462 patients with invasive breast carcinoma who underwent at least one lumpectomy between January 2011 and December 2013. Postoperative data was analyzed based on where additional disease was found, as it relates to the margin status of the initial lumpectomy and the additional direct costs associated with additional procedures. Of the 462 patients sampled, 149 underwent a re-excision surgery (32.2%). Four patients underwent mastectomy as their second operation. In the 40 patients with additional disease found on re-excision, 36 (90.0%) of them had a positive margin on their initial lumpectomy. None of the four mastectomy patients had residual disease. The mean cost of the initial lumpectomy for all 462 patients was $2118.01 plus an additional $1801.92 for those who underwent re-excision. A positive margin was most predictive of finding residual tumor on re-excision as would be expected. Using old criteria only 0.07% (4/61) of patients who had undergone re-excision with a 'clear' margin, had additional tumor found, at a total cost of $106,354.11. Thus, the new consensus guidelines will lead to less overall cost, at no clinical risk to patients while reducing a patient's surgical risk and essentially eliminating delays in adjuvant care. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Are subduction zones invading the atlantic? Evidence from the southwest iberia margin

    NARCIS (Netherlands)

    Duarte, João C.; Rosas, Filipe M.; Terrinha, Pedro; Schellart, Wouter P.; Boutelier, David; Gutscher, Marc André; Ribeiro, António

    Subduction initiation at passive margins plays a central role in the plate tectonics theory. However, the process by which a passive margin becomes active is not well understood. In this paper we use the southwest Iberia margin (SIM) in the Atlantic Ocean to study the process of passive margin

  20. Colorado Basin Structure and Rifting, Argentine passive margin

    Science.gov (United States)

    Autin, Julia; Scheck-Wenderoth, Magdalena; Loegering, Markus; Anka, Zahie; Vallejo, Eduardo; Rodriguez, Jorge; Marchal, Denis; Reichert, Christian; di Primio, Rolando

    2010-05-01

    The Argentine margin presents a strong segmentation with considerable strike-slip movements along the fracture zones. We focus on the volcanic segment (between the Salado and Colorado transfer zones), which is characterized by seaward dipping reflectors (SDR) all along the ocean-continent transition [e.g. Franke et al., 2006; Gladczenko et al., 1997; Hinz et al., 1999]. The segment is structured by E-W trending basins, which differs from the South African margin basins and cannot be explained by classical models of rifting. Thus the study of the relationship between the basins and the Argentine margin itself will allow the understanding of their contemporary development. Moreover the comparison of the conjugate margins suggests a particular evolution of rifting and break-up. We firstly focus on the Colorado Basin, which is thought to be the conjugate of the well studied Orange Basin [Hirsch et al., 2009] at the South African margin [e.g. Franke et al., 2006]. This work presents results of a combined approach using seismic interpretation and structural, isostatic and thermal modelling highlighting the structure of the crust. The seismic interpretation shows two rift-related discordances: one intra syn-rift and the break-up unconformity. The overlying sediments of the sag phase are less deformed (no sedimentary wedges) and accumulated before the generation of oceanic crust. The axis of the Colorado Basin trends E-W in the western part, where the deepest pre-rift series are preserved. In contrast, the basin axis turns to a NW-SE direction in its eastern part, where mainly post-rift sediments accumulated. The most distal part reaches the margin slope and opens into the oceanic basin. The general basin direction is almost orthogonal to the present-day margin trend. The most frequent hypothesis explaining this geometry is that the Colorado Basin is an aborted rift resulting from a previous RRR triple junction [e.g. Franke et al., 2002]. The structural interpretation

  1. Study on thermal performance and margins of BWR fuel elements

    International Nuclear Information System (INIS)

    Stosic, Zoran

    1999-01-01

    This paper contributes to developing a methodology of predicting and analyzing thermal performance and margins of Boiling Water Reactor (BWR) fuel assemblies under conditions of reaching high quality Boiling Crisis and subsequent post-dryout thermal hydraulics causing temperature excursion of fuel cladding. Operational margins against dryout and potential for increasing fuel performance with appropriate benefits are discussed. The philosophy of modeling with its special topics are demonstrated on the HECHAN (HEated CHannel ANalyzer) model as the state-of-art for thermal-hydraulics analysis of BWR fuel assemblies in pre- and post-dryout two-phase flow regimes. The scope of further work either being or has to be performed concerning implementation of new physical aspects, including domain extension of HECHAN model applications to the Pressurized Water Reactors (PWRs), is discussed. Finally, a comprehensive overview of the literature dealing with development of the model is given. (author)

  2. Margin Requirements and Equity Option Returns

    DEFF Research Database (Denmark)

    Hitzemann, Steffen; Hofmann, Michael; Uhrig-Homburg, Marliese

    In equity option markets, traders face margin requirements both for the options themselves and for hedging-related positions in the underlying stock market. We show that these requirements carry a significant margin premium in the cross-section of equity option returns. The sign of the margin...... premium depends on demand pressure: If end-users are on the long side of the market, option returns decrease with margins, while they increase otherwise. Our results are statistically and economically significant and robust to different margin specifications and various control variables. We explain our...... findings by a model of funding-constrained derivatives dealers that require compensation for satisfying end-users’ option demand....

  3. Margin Requirements and Equity Option Returns

    DEFF Research Database (Denmark)

    Hitzemann, Steffen; Hofmann, Michael; Uhrig-Homburg, Marliese

    In equity option markets, traders face margin requirements both for the options themselves and for hedging-related positions in the underlying stock market. We show that these requirements carry a significant "margin premium" in the cross-section of equity option returns. The sign of the margin...... premium depends on demand pressure: If end-users are on the long side of the market, option returns decrease with margins, while they increase otherwise. Our results are statistically and economically significant and robust to different margin specifications and various control variables. We explain our...... findings by a model of funding-constrained derivatives dealers that require compensation for satisfying end-users’ option demand....

  4. Stall Margin Improvement in a Centrifugal Compressor through Inducer Casing Treatment

    Directory of Open Access Journals (Sweden)

    V. V. N. K. Satish Koyyalamudi

    2016-01-01

    Full Text Available The increasing trend of high stage pressure ratio with increased aerodynamic loading has led to reduction in stable operating range of centrifugal compressors with stall and surge initiating at relatively higher mass flow rates. The casing treatment technique of stall control is found to be effective in axial compressors, but very limited research work is published on the application of this technique in centrifugal compressors. Present research was aimed to investigate the effect of casing treatment on the performance and stall margin of a high speed, 4 : 1 pressure ratio centrifugal compressor through numerical simulations using ANSYS CFX software. Three casing treatment configurations were developed and incorporated in the shroud over the inducer of the impeller. The predicted performance of baseline compressor (without casing treatment was in good agreement with published experimental data. The compressor with different inducer casing treatment geometries showed varying levels of stall margin improvement, up to a maximum of 18%. While the peak efficiency of the compressor with casing treatment dropped by 0.8%–1% compared to the baseline compressor, the choke mass flow rate was improved by 9.5%, thus enhancing the total stable operating range. The inlet configuration of the casing treatment was found to play an important role in stall margin improvement.

  5. Incidence of positive surgical margins after robotic assisted radical prostatectomy: Does the surgeon's experience have an influence on all pathological stages?

    Science.gov (United States)

    Villamil, A W; Costabel, J I; Billordo Peres, N; Martínez, P F; Giudice, C R; Damia, O H

    2014-03-01

    The aim of this study is to analyze the clinical and surgical features of patients who underwent robotic-assisted radical prostatectomy (RARP) at our institution, and the impact of the surgeon's experience in the oncological results related to pathological stage. An analysis of 300 RARP consecutively performed by the same urologist was conducted. Patients were divided into 3 groups of 100 patients in chronological order, according to surgery date. All patients had organ-confined clinical stage. Variables which could impact in positive margins rates were analyzed. Finally, positive surgical margins (PSM) in regard to pathological stage and surgeon's experience were compared and analyzed. No significant differences were found in variables which could impact in PSM rates. The overall PSM rate was 21%, with 28% in the first group, 20% in the second, and 16% in the third (P = .108). Significant lineal decreasing tendency was observed (P = .024). In pT2 patients, the overall PSM rate was 16.6%, with 27%, 13.8%, and 7.3% in each group respectively (P = .009). A significant difference was found between group 1 and group 3 (P = .004). In pT3 patients, the surgeon's experience was not significantly associated with margin reductions with an overall PSM rate of 27.7% (28.2%, 28.6%, and 26.7% in each group respectively). Clinical and surgical features in our patients did not vary over time. We found a significant reduction of PSM related to surgeon's experience in pT2 patients. Contrariwise, the margin status remained stable despite increasing experience in pT3 patients. Copyright © 2013 AEU. Published by Elsevier Espana. All rights reserved.

  6. Example of a SWOV (Institute for Road Safety Research) safety study : "Avenida Marginal", Lisbon 1989.

    NARCIS (Netherlands)

    Janssen, S.T.M.C.

    1991-01-01

    This paper describes the accident study on the Marginal Road between Alges and Cascais in Portugal. The aim of this study was to produce a philosophy for a strategy to select the best safety measures out of several which had already been proposed. The general point of departure in this philosophy is

  7. The Effects of Marginal Deviations on Behavioral Development.

    Science.gov (United States)

    Caprara, Gian Vittorio; Dodge, Kenneth A; Pastorelli, Concetta; Zelli, Arnaldo

    2006-01-01

    This investigation was conceptually framed within the theory of marginal deviations (Caprara & Zimbardo, 1996) and sought evidence for the general hypothesis that some children who initially show marginal behavioral problems may, over time, develop more serious problems depending partly on other personal and behavioral characteristics. To this end, the findings of two studies conducted, respectively, with American elementary school children and Italian middle school students are reviewed. These two studies show that hyperactivity, cognitive difficulties, low special preference, and lack of prosocial behavior increase a child's risk for growth in aggressive behavior over several school years. More importantly, they also show that equivalent levels of these risk factors have a greater impact on the development of children who, early on, were marginally aggressive.

  8. Optimal Patient Positioning (Prone Versus Supine) for VMAT in Gynecologic Cancer: A Dosimetric Study on the Effect of Different Margins

    Energy Technology Data Exchange (ETDEWEB)

    Heijkoop, Sabrina T., E-mail: s.heijkoop@erasmusmc.nl [Department of Radiation Oncology, Erasmus MC Cancer Institute, Rotterdam (Netherlands); Westerveld, Henrike; Bijker, Nina [Department of Radiation Oncology, Academic Medical Center, Amsterdam (Netherlands); Feije, Raphael; Sharfo, Abdul W. [Department of Radiation Oncology, Erasmus MC Cancer Institute, Rotterdam (Netherlands); Wieringen, Niek van [Department of Radiation Oncology, Academic Medical Center, Amsterdam (Netherlands); Mens, Jan Willem M. [Department of Radiation Oncology, Erasmus MC Cancer Institute, Rotterdam (Netherlands); Stalpers, Lukas J.A. [Department of Radiation Oncology, Academic Medical Center, Amsterdam (Netherlands); Hoogeman, Mischa S. [Department of Radiation Oncology, Erasmus MC Cancer Institute, Rotterdam (Netherlands)

    2016-10-01

    Purpose/Objective: It is unknown whether the historically found dosimetric advantages of treating gynecologic cancer with the patient in a prone position with use of a small-bowel displacement device (belly-board) remain when volumetric arc therapy (VMAT) is used and whether these advantages depend on the necessary margin between clinical target volume (CTV) and planning target volume (PTV). The aim of this study is to determine the best patient position (prone or supine) in terms of sparing organs at risk (OAR) for various CTV-to-PTV margins and VMAT dose delivery. Methods and Materials: In an institutional review board—approved study, 26 patients with gynecologic cancer scheduled for primary (9) or postoperative (17) radiation therapy were scanned in a prone position on a belly-board and in a supine position on the same day. The primary tumor CTV, nodal CTV, bladder, bowel, and rectum were delineated on both scans. The PTVs were created each with a different margin for the primary tumor and nodal CTV. The VMAT plans were generated with our in-house system for automated treatment planning. For all margin combinations, the supine and prone plans were compared with consideration of all OAR dose-volume parameters but with highest priority given to bowel cavity V{sub 45Gy} (cm{sup 3}). Results: For both groups, the prone position reduced the bowel cavity V{sub 45Gy}, in particular for nodal margins ≥10 mm (ΔV{sub 45Gy} = 23.9 ± 10.6 cm{sup 3}). However, for smaller margins, the advantage was much less pronounced (ΔV{sub 45Gy} = 6.5 ± 3.0 cm{sup 3}) and did not reach statistical significance. The rectum mean dose (D{sub mean}) was significantly lower (ΔD{sub mean} = 2.5 ± 0.3 Gy) in the prone position for both patient groups and for all margins, and the bladder D{sub mean} was significantly lower in the supine position (ΔD{sub mean} = 2.6 ± 0.4 Gy) only for the postoperative group. The advantage of the prone position was not present if it

  9. Marginal Assessment of Crowns by the Aid of Parallel Radiography

    Directory of Open Access Journals (Sweden)

    Farnaz Fattahi

    2015-03-01

    Full Text Available Introduction: Marginal adaptation is the most critical item in long-term prognosis of single crowns. This study aimed to assess the marginal quality as well asthe discrepancies in marginal integrity of some PFM single crowns of posterior teeth by employing parallel radiography in Shiraz Dental School, Shiraz, Iran. Methods: In this descriptive study, parallel radiographies were taken from 200 fabricated PFM single crowns of posterior teeth after cementation and before discharging the patient. To calculate the magnification of the images, a metallic sphere with the thickness of 4 mm was placed in the direction of the crown margin on the occlusal surface. Thereafter, the horizontal and vertical space between the crown margins, the margin of preparations and also the vertical space between the crown margin and the bone crest were measured by using digital radiological software. Results: Analysis of data by descriptive statistics revealed that 75.5% and 60% of the cases had more than the acceptable space (50µm in the vertical (130±20µm and horizontal (90±15µm dimensions, respectively. Moreover, 85% of patients were found to have either horizontal or vertical gap. In 77% of cases, the margins of crowns invaded the biologic width in the mesial and 70% in distal surfaces. Conclusion: Parallel radiography can be expedient in the stage of framework try-in to yield some important information that cannot be obtained by routine clinical evaluations and may improve the treatment prognosis

  10. Comparison of marginal and internal adaptation of copings fabricated from three different fabrication techniques: An in vitro study.

    Science.gov (United States)

    Arora, Aman; Yadav, Avneet; Upadhyaya, Viram; Jain, Prachi; Verma, Mrinalini

    2018-01-01

    The purpose of this study was to compare the marginal and internal adaptation of cobalt-chromium (Co-Cr) copings fabricated from conventional wax pattern, three-dimensional (3D)-printed resin pattern, and laser sintering technique. A total of thirty copings were made, out of which ten copings were made from 3D-printed resin pattern (Group A), ten from inlay wax pattern (Group B), and ten copings were obtained from direct metal laser sintering (DMLS) technique (Group C). All the thirty samples were seated on their respective dies and sectioned carefully using a laser jet cutter and were evaluated for marginal and internal gaps at the predetermined areas using a stereomicroscope. The values were then analyzed using one-way ANOVA test and post hoc Bonferroni test. One-way ANOVA showed lowest mean marginal discrepancy for DMLS and highest value for copings fabricated from inlay wax. The values for internal discrepancy were highest for DMLS (169.38) and lowest for 3D-printed resin pattern fabricated copings (133.87). Post hoc Bonferroni test for both marginal and internal discrepancies showed nonsignificant difference when Group A was compared to Group B ( P > 0.05) and significant when Group A was compared with Group C ( P < 0.05). Group B showed significant difference ( P < 0.05) when compared with Group C. Marginal and internal discrepancies of all the three casting techniques were within clinically acceptable values. Marginal fit of DMLS was superior as compared to other two techniques, whereas when internal fit was evaluated, conventional technique showed the best internal fit.

  11. Integrated geophysical study of the northeastern margin of Tibetan Plateau

    Science.gov (United States)

    Shi, L.; Meng, X.; Guo, L.

    2011-12-01

    Tibetan Plateau, the so-called "Roof of the World", is a direct consequence of collision of the Indian plate with the Eurasian plate starting in the early Cenozoic time. The continent-continent collision is still going on. The northeastern margin of Tibetan Plateau is the front part of the Tibetan Plateau extends to mainland and favorable area for studying uplift and deformation of the Tibetan Plateau. In the past decades, a variety of geophysical methods were conducted to study geodynamics and geological tectonics of this region. We assembled satellite-derived free-air gravity anomalies with a resolution of one arc-minute from the Scripps Institution of Oceanography, and reduced them to obtain Complete Bouguer Gravity Anomalies. Then we gridded Complete Bouguer Gravity Anomalies on a regular grid, and subsequently processed them with the preferential continuation method to attenuate high-frequency noise and analyzed regional and residual anomalies. We also calculated tilt-angle derivative of Complete Bouguer Gravity Anomalies to derive clearer geological structures with more details. Then we calculated the depth distribution of the Moho discontinuity surface in this area by 3D density interface inversion. From the results of preliminary processing, we analyzed the main deep faults and geological tectonics in this region. We extracted seven important profiles' data of Complete Bouguer Gravity Anomalies in this area, and then did forward modeling and inversion on each profile with constraints of geological information and other geophysical data. In the future, we will perform 3D constrained inversion of Complete Bouguer Gravity Anomalies in this region for better understanding deep structure and tectonics of the northeastern margin of Tibetan Plateau. Acknowledgment: We acknowledge the financial support of the SinoProbe project (201011039), the Fundamental Research Funds for the Central Universities (2010ZY26 2011PY0184), and the National Natural Science Foundation

  12. Anthropogenic impacts on continental margins: New frontiers and engagement arena for global sustainability research and action

    Science.gov (United States)

    Liu, K. K.; Glavovic, B.; Limburg, K.; Emeis, K. C.; Thomas, H.; Kremer, H.; Avril, B.; Zhang, J.; Mulholland, M. R.; Glaser, M.; Swaney, D. P.

    2014-12-01

    There is an urgent need to design and implement transformative governance strategies that safeguard Earth's life-support systems essential for long-term human well-being. From a series of meetings of the Continental Margins Working Group co-sponsored by IMBER and LOICZ of IGBP, we conclude that the greatest urgency exists at the ocean-land interface - the continental margins or the Margin - which extends from coastlands over continental shelves and slopes bordering the deep ocean. The Margin is enduring quadruple squeeze from (i) Population growth and rising demands for resources; (ii) Ecosystem degradation and loss; (iii) Rising CO2, climate change and alteration of marine biogeochemistry and ecosystems; and (iv) Rapid and irreversible changes in social-ecological systems. Some areas of the Margin that are subject to the greatest pressures (e.g. the Arctic) are also those for which knowledge of fundamental processes remains most limited. Aside from improving our basic understanding of the nature and variability of the Margin, priority issues include: (i) investment reform to prevent lethal but profitable activities; (ii) risk reduction; and (iii) jurisdiction, equity and fiscal responsibility. However, governance deficits or mismatches are particularly pronounced at the ocean-edge of the Margin and the prevailing Law of the Sea is incapable of resolving these challenges. The "gold rush" of accelerating demands for space and resources, and variability in how this domain is regulated, move the Margin to the forefront of global sustainability research and action. We outline a research strategy in 3 engagement arenas: (a) knowledge and understanding of dynamic Margin processes; (b) development, innovation and risk at the Margin; and (c) governance for sustainability on the Margin. The goals are (1) to better understand Margin social-ecological systems, including their physical and biogeochemical components; (2) to develop practical guidance for sustainable development

  13. Robotic unclamped "minimal-margin" partial nephrectomy: ongoing refinement of the anatomic zero-ischemia concept.

    Science.gov (United States)

    Satkunasivam, Raj; Tsai, Sheaumei; Syan, Sumeet; Bernhard, Jean-Christophe; de Castro Abreu, Andre Luis; Chopra, Sameer; Berger, Andre K; Lee, Dennis; Hung, Andrew J; Cai, Jie; Desai, Mihir M; Gill, Inderbir S

    2015-10-01

    Anatomic partial nephrectomy (PN) techniques aim to decrease or eliminate global renal ischemia. To report the technical feasibility of completely unclamped "minimal-margin" robotic PN. We also illustrate the stepwise evolution of anatomic PN surgery with related outcomes data. This study was a retrospective analysis of 179 contemporary patients undergoing anatomic PN at a tertiary academic institution between October 2009 and February 2013. Consecutive consented patients were grouped into three cohorts: group 1, with superselective clamping and developmental-curve experience (n = 70); group 2, with superselective clamping and mature experience (n = 60); and group 3, which had completely unclamped, minimal-margin PN (n = 49). Patients in groups 1 and 2 underwent superselective tumor-specific devascularization, whereas patients in group 3 underwent completely unclamped minimal-margin PN adjacent to the tumor edge, a technique that takes advantage of the radially oriented intrarenal architecture and anatomy. Primary outcomes assessed the technical feasibility of robotic, completely unclamped, minimal-margin PN; short-term changes in estimated glomerular filtration rate (eGFR); and development of new-onset chronic kidney disease (CKD) stage >3. Secondary outcome measures included perioperative variables, 30-d complications, and histopathologic outcomes. Demographic data were similar among groups. For similarly sized tumors (p = 0.13), percentage of kidney preserved was greater (p = 0.047) and margin width was narrower (p = 0.0004) in group 3. In addition, group 3 had less blood loss (200, 225, and 150ml; p = 0.04), lower transfusion rates (21%, 23%, and 4%; p = 0.008), and shorter hospital stay (p = 0.006), whereas operative time and 30-d complication rates were similar. At 1-mo postoperatively, median percentage reduction in eGFR was similar (7.6%, 0%, and 3.0%; p = 0.53); however, new-onset CKD stage >3 occurred less frequently in group 3 (23%, 10%, and 2%; p = 0

  14. Splenic marginal zone lymphoma.

    Science.gov (United States)

    Piris, Miguel A; Onaindía, Arantza; Mollejo, Manuela

    Splenic marginal zone lymphoma (SMZL) is an indolent small B-cell lymphoma involving the spleen and bone marrow characterized by a micronodular tumoral infiltration that replaces the preexisting lymphoid follicles and shows marginal zone differentiation as a distinctive finding. SMZL cases are characterized by prominent splenomegaly and bone marrow and peripheral blood infiltration. Cells in peripheral blood show a villous cytology. Bone marrow and peripheral blood characteristic features usually allow a diagnosis of SMZL to be performed. Mutational spectrum of SMZL identifies specific findings, such as 7q loss and NOTCH2 and KLF2 mutations, both genes related with marginal zone differentiation. There is a striking clinical variability in SMZL cases, dependent of the tumoral load and performance status. Specific molecular markers such as 7q loss, p53 loss/mutation, NOTCH2 and KLF2 mutations have been found to be associated with the clinical variability. Distinction from Monoclonal B-cell lymphocytosis with marginal zone phenotype is still an open issue that requires identification of precise and specific thresholds with clinical meaning. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. Categorical marginal models: quite extensive package for the estimation of marginal models for categorical data

    OpenAIRE

    Wicher Bergsma; Andries van der Ark

    2015-01-01

    A package accompanying the book Marginal Models for Dependent, Clustered, and Longitudinal Categorical Data by Bergsma, Croon, & Hagenaars, 2009. It’s purpose is fitting and testing of marginal models.

  16. The stability margin on EAST tokamak

    International Nuclear Information System (INIS)

    Jin-Ping, Qian; Bao-Nian, Wan; Biao, Shen; Bing-Jia, Xiao; Walker, M.L.; Humphreys, D.A.

    2009-01-01

    The experimental advanced superconducting tokamak (EAST) is the first full superconducting tokamak with a D-shaped cross-sectional plasma presently in operation. Its poloidal coils are relatively far from the plasma due to the necessary thermal isolation from the superconducting magnets, which leads to relatively weaker coupling between plasma and poloidal field. This may cause more difficulties in controlling the vertical instability by using the poloidal coils. The measured growth rates of vertical stability are compared with theoretical calculations, based on a rigid plasma model. Poloidal beta and internal inductance are varied to investigate their effects on the stability margin by changing the values of parameters α n and γ n (Howl et al 1992 Phys. Fluids B 4 1724), with plasma shape fixed to be a configuration with k = 1.9 and δ = 0.5. A number of ways of studying the stability margin are investigated. Among them, changing the values of parameters κ and l i is shown to be the most effective way to increase the stability margin. Finally, a guideline of stability margin M s (κ, l i , A) to a new discharge scenario showing whether plasmas can be stabilized is also presented in this paper

  17. Molecular markers in the surgical margin of oral carcinomas

    DEFF Research Database (Denmark)

    Bilde, A.; Buchwald, C. von; Dabelsteen, E.

    2009-01-01

    epithelium in the surgical resection margin may explain the local recurrence rate. The purpose of this study is to investigate the presence of senescence markers, which may represent early malignant changes in the margin that in routine pathological evaluations are classified as histologically normal...

  18. Effect of water temperature on the fit of provisional crown margins during polymerization: An in vitro study

    Directory of Open Access Journals (Sweden)

    Vivekanandan Ramkumar

    2012-01-01

    Full Text Available Aim: To evaluate the effect of water temperature on the marginal fit of bis-acrylic composite provisional crown during resin polymerization. Materials and Methods: Precisely machined 10 brass master dies were designed to simulate molar teeth. Five brass dies were selected and precisely machined to simulate all ceramic crown preparation. An acrylic jaw replica was made in which brass dies were arranged equidistant from each other. A custom-made metallic tray was fabricated on the acrylic jaw replica to make polyvinyl siloxane impression matrix. Bis-acrylic composite resin provisional crowns were made using polyvinyl siloxane impression matrix. Provisional crowns were polymerized at room temperature (Group I direct technique, on dental stone cast; Group I indirect technique crowns and at different water temperatures (Group II direct technique crowns. The vertical marginal gap between all the provisional crown margins and the finish line of brass dies was measured using a Research Stereomicroscope System. Results: The results were statistically analyzed using one-way analysis of variance (ANOVA test and Newman-Keul′s test. The results showed that crowns polymerized in 20°C and 30°C water had marginal gap approximately three times smaller than those polymerized in 30°C air, due to the reduced polymerization shrinkage. Conclusion: This study shows that crowns polymerized in 20°C and 30°C water had mean vertical marginal gap approximately three times smaller than those polymerized in 30°C air. It was approximately closer to that of crowns fabricated by indirect technique. Warmer water also supposedly hastens polymerization.

  19. Effect of water temperature on the fit of provisional crown margins during polymerization: An in vitro study.

    Science.gov (United States)

    Ramkumar, Vivekanandan; Sangeetha, Arunachalam; Kumar, Vinaya

    2012-08-01

    To evaluate the effect of water temperature on the marginal fit of bis-acrylic composite provisional crown during resin polymerization. Precisely machined 10 brass master dies were designed to simulate molar teeth. Five brass dies were selected and precisely machined to simulate all ceramic crown preparation. An acrylic jaw replica was made in which brass dies were arranged equidistant from each other. A custom-made metallic tray was fabricated on the acrylic jaw replica to make polyvinyl siloxane impression matrix. Bis-acrylic composite resin provisional crowns were made using polyvinyl siloxane impression matrix. Provisional crowns were polymerized at room temperature (Group I direct technique, on dental stone cast; Group I indirect technique crowns) and at different water temperatures (Group II direct technique crowns). The vertical marginal gap between all the provisional crown margins and the finish line of brass dies was measured using a Research Stereomicroscope System. The results were statistically analyzed using one-way analysis of variance (ANOVA) test and Newman-Keul's test. The results showed that crowns polymerized in 20°C and 30°C water had marginal gap approximately three times smaller than those polymerized in 30°C air, due to the reduced polymerization shrinkage. This study shows that crowns polymerized in 20°C and 30°C water had mean vertical marginal gap approximately three times smaller than those polymerized in 30°C air. It was approximately closer to that of crowns fabricated by indirect technique. Warmer water also supposedly hastens polymerization.

  20. 12 CFR 220.4 - Margin account.

    Science.gov (United States)

    2010-01-01

    ... Banking FEDERAL RESERVE SYSTEM (CONTINUED) BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM CREDIT BY... securities. The required margin on a net long or net short commitment in a when-issued security is the margin...) Interest charged on credit maintained in the margin account; (ii) Premiums on securities borrowed in...

  1. Evaluation of marginal and internal adaptation of hybrid and nanoceramic systems with microcomputed tomography: An in vitro study.

    Science.gov (United States)

    Yildirim, Güler; Uzun, Ismail H; Keles, Ali

    2017-08-01

    The accuracy of recently introduced chairside computer-aided design and computer-aided manufacturing (CAD-CAM) blocks is not well established, and marginal integrity and internal adaptation are not known. The purpose of this in vitro study was to evaluate the marginal and internal adaptation of hybrid and nanoceramics using microcomputed tomography (μ-CT). The marginal and internal adaptation of 3 polymer-infiltrated ceramic-network (PICN) materials (Vita Enamic [VE]; Lava Ultimate [LU]; Vita Suprinity [VS]) were compared with lithium disilicate (IPS e.max.CAD, IPS). Ninety-six specimens (48 dies and 48 crowns) were prepared (n=12 each group) using a chairside CAD-CAM system. The restorations were scanned with μ-CT, with 160 measurements made for each crown, and used in 2-dimensional (2D) analysis. The marginal adaptation of marginal discrepancy (MD), absolute marginal discrepancy (AMD), internal adaptation of shoulder area (SA), axial space (AS), and occlusal space (OS) were compared using appropriate statistical analysis methods (α=.05). Cement volumes were compared using 3D analysis. The IPS blocks showed higher MD (130 μm), AMD (156 μm), SA (111 μm) (P.05). IPS had the largest cement space at 18 mm 3 (Pmarginal and internal adaptation values were within a clinically acceptable range for all 3 hybrids and nanoceramics tested. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  2. Marginal Leakage of Class V Composite Resin Restorations

    Directory of Open Access Journals (Sweden)

    Maryam Khoroushi

    2018-01-01

    Full Text Available >Introduction: Marginal leakage is one of the significant causes of restoration failure. This in-vitro study was conducted to compare cone beam computed tomography (CBCT and dye-penetration methods for determining marginal leakage at gingival surface of class V resin composite restorations.Materials and Methods: Class V cavities were prepared on the buccal surfaces of nineteen caries-free extracted human molar teeth. Cavities were conditioned and filled. The teeth were immersed in a 50% w/w aqueous silver nitrate solution for 24 h and were taken out and rinsed with distilled water. Then, they were put into a developing solution. Whole specimens were first viewed with CBCT and were then sectioned and evaluated by stereomicroscope.Results: Measurement of agreement between CBCT and stereomicroscope revealed that 15 (78.9% teeth had score 0, 1 (5.3% tooth had score 1, and 1 (5.3% tooth had score 2 in both techniques. Measurement of agreement between CBCT and stereomicroscope techniques, in the detection of marginal leakage, was 89.5% (Kappa coefficient = 0.627, P = 0.00. The Wilcoxon paired rank test revealed no significant difference between the results of CBCT and stereomicroscope in measuring the leakage at gingival margin (P = 0.157.Conclusion: Considering the limitations of the study, there was no significant difference between the results of CBCT and stereomicroscope in measuring the leakage at gingival margin of class V composite restorations. CBCT can be used noninvasively to detect the marginal leakage of gingival wall of class V composite restorations using aqueous silver nitrate solution as a tracer.

  3. Conference Report: The New Discovery of Margins: Theory-Based Excursions in Marginal Social Fields

    Directory of Open Access Journals (Sweden)

    Babette Kirchner

    2014-05-01

    Full Text Available At this year's spring conference of the Sociology of Knowledge Section of the German Sociological Association, a diverse range of theoretical concepts and multiple empirical insights into different marginal social fields were presented. As in everyday life, drawing a line between center and margin can be seen as an important challenge that must equally be faced in sociology. The socially constructed borderline appears to be highly variable. Therefore it has to be delineated or fixed somehow. The construction of margins is necessary for society in general and smaller social groupings alike to confirm one's own "normal" identity, or one's own membership on the fringes. The different contributions exemplify what was established at the beginning of the conference: Namely that society and its margins are defined differently according to the empirical as well as conceptual focus. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1402148

  4. Marginal Zone Lymphoma Complicated by Protein Losing Enteropathy

    Directory of Open Access Journals (Sweden)

    Nadine Stanek

    2016-01-01

    Full Text Available Protein losing enteropathy (PLE refers to excessive intestinal protein loss, resulting in hypoalbuminemia. Underlying pathologies include conditions leading to either reduced intestinal barrier or lymphatic congestion. We describe the case of a patient with long-lasting diffuse abdominal problems and PLE. Repetitive endoscopies were normal with only minimal lymphangiectasia in biopsies. Further evaluations revealed an indolent marginal zone lymphoma with minor bone marrow infiltration. Monotherapy with rituximab decreased bone marrow infiltration of the lymphoma but did not relieve PLE. Additional treatments with steroids, octreotide, a diet devoid of long-chain fatty-acids, and parenteral nutrition did not prevent further clinical deterioration with marked weight loss (23 kg, further reduction in albumin concentrations (nadir 8 g/L, and a pronounced drop in performance status. Finally, immunochemotherapy with rituximab and bendamustine resulted in hematological remission and remarkable clinical improvement. 18 months after therapy the patient remains free of gastrointestinal complaints and has regained his body weight with normal albumin levels. We demonstrate a case of PLE secondary to indolent marginal zone lymphoma. No intestinal pathologies were detected, contrasting a severe and almost lethal clinical course. Immunochemotherapy relieved lymphoma and PLE, suggesting that a high suspicion of lymphoma is warranted in otherwise unexplained cases of PLE.

  5. Marginal-cost pricing for Hydro-Quebec residential customers

    International Nuclear Information System (INIS)

    Paquin, C.

    1994-02-01

    An option available to governments and to utilities such as Hydro-Quebec for responding to objectives of energy efficiency is the adoption of marginal cost pricing. Compared to currently used price structures, marginal cost pricing will allow improvement of price signals and assure an optimal utilization of the resource. That type of pricing could be economically beneficial but may not be desirable from the point of view of revenue distribution. Taking account of Hydro-Quebec's cost structure, pure marginal cost pricing would generate an income that would be strongly contested on equity grounds. For example, it would raise prices 60% for residential customers. Faced with this possibility, an analysis is presented of the impact of a peak-offpeak pricing (or pure marginal cost pricing) on Hydro-Quebec's residential customer energy bills. The marginal costs of Hydro-Quebec are calculated by the method of Bernard and Chatel (1985) and analysis of the results is based on Friedman and Weare (1993). A sample of 28,417 residential customers from a 1989 Hydro-Quebec survey is used in the study. Two scenarios are analyzed; the first allowing comparison of the energy bill only on the basis of marginal costs and of average costs, and the second allowing comparison of the impact of marginal cost pricing on the total bill. In the first scenario, the impact translates into a 31% increase in energy bills for the entire customer class considered; in addition, this impact is inversely proportional to the revenue class. In the second scenario, the increase is 24%. 33 refs., 10 figs., 53 tabs

  6. Safety margins of operating reactors. Analysis of uncertainties and implications for decision making

    International Nuclear Information System (INIS)

    2003-01-01

    Maintaining safety in the design and operation of nuclear power plants (NPPs) is a very important task under the conditions of a challenging environment, affected by the deregulated electricity market and implementation of risk informed regulations. In Member States, advanced computer codes are widely used as safety analysis tools in the framework of licensing of new NPP projects, safety upgrading programmes of existing NPPs, periodic safety reviews, renewal of operating licences, use of the safety margins for reactor power uprating, better utilization of nuclear fuel and higher operational flexibility, for justification of lifetime extensions, development of new emergency operating procedures, analysis of operational events, and development of accident management programmes. The issue of inadequate quality of safety analysis is becoming important due to a general tendency to use advanced tools for better establishment and utilization of safety margins, while the existence of such margins assure that NPPs operate safely in all modes of operation and at all times. The most important safety margins relate to physical barriers against release of radioactive material, such as fuel matrix and fuel cladding, reactor coolant system boundary, and the containment. Typically, safety margins are determined with use of computational tools for safety analysis. Advanced best estimate computer codes are suggested e.g. in the IAEA Safety Guide on Safety Assessment and Verification for Nuclear Power Plants to be used for current safety analysis. Such computer codes require their careful application to avoid unjustified reduction in robustness of the reactor safety. The issue of uncertainties in safety analyses and their impact on evaluation of safety margins is addressed in a number of IAEA guidance documents, in particular in the Safety Report on Accident Analysis for Nuclear Power Plants. It is also discussed in various technical meetings and workshops devoted to this area. The

  7. Does insecticide drift adversely affect grasshoppers (Orthoptera: Saltatoria) in field margins? A case study combining laboratory acute toxicity testing with field monitoring data.

    Science.gov (United States)

    Bundschuh, Rebecca; Schmitz, Juliane; Bundschuh, Mirco; Brühl, Carsten Albrecht

    2012-08-01

    The current terrestrial risk assessment of insecticides regarding nontarget arthropods considers exclusively beneficial organisms, whereas herbivorous insects, such as grasshoppers, are ignored. However, grasshoppers living in field margins or meadows adjacent to crops may potentially be exposed to insecticides due to contact with or ingestion of contaminated food. Therefore, the present study assessed effects of five active ingredients of insecticides (dimethoate, pirimicarb, imidacloprid, lambda-cyhalothrin, and deltamethrin) on the survival of Chorthippus sp. grasshopper nymphs by considering two routes of exposure (contact and oral). The experiments were accompanied by monitoring field margins that neighbored cereals, vineyards, and orchards. Grasslands were used as reference sites. The laboratory toxicity tests revealed a sensitivity of grasshoppers with regard to the insecticides tested in the present study similar to that of the standard test species used in arthropod risk assessments. In the field monitoring program, increasing grasshopper densities were detected with increasing field margin width next to cereals and vineyards, but densities remained low over the whole range of field margins from 0.5 to 20 m next to orchards. Grasshopper densities equivalent to those of grassland sites were only observed in field margins exceeding 9 m in width, except for field margins next to orchards. These results may indicate that current insecticide risk assessments are insufficiently protective for grasshoppers in field margins. Copyright © 2012 SETAC.

  8. Regrounding in Place: Paths to Native American Truths at the Margins

    Science.gov (United States)

    Lucas, Michael

    2013-01-01

    Margin acts as ground to receive the figure of the text. Margin is initially unreadable, but as suggested by gestalt studies, may be reversed, or regrounded. A humanities course, "Native American Architecture and Place," was created for a polytechnic student population, looking to place as an inroad for access to the margins of a better…

  9. [An experimental study on the effect of different optical impression methods on marginal and internal fit of all-ceramic crowns].

    Science.gov (United States)

    Tan, Fa-Bing; Wang, Lu; Fu, Gang; Wu, Shu-Hong; Jin, Ping

    2010-02-01

    To study the effect of different optical impression methods in Cerec 3D/Inlab MC XL system on marginal and internal fit of all-ceramic crowns. A right mandibular first molar in the standard model was used to prepare full crown and replicated into thirty-two plaster casts. Sixteen of them were selected randomly for bonding crown and the others were used for taking optical impression, in half of which the direct optical impression taking method were used and the others were used for the indirect method, and then eight Cerec Blocs all-ceramic crowns were manufactured respectively. The fit of all-ceramic crowns were evaluated by modified United States Public Health Service (USPHS) criteria and scanning electron microscope (SEM) imaging, and the data were statistically analyzed with SAS 9.1 software. The clinically acceptable rate for all marginal measurement sites was 87.5% according to USPHS criteria. There was no statistically significant difference in marginal fit between direct and indirect method group (P > 0.05). With SEM imaging, all marginal measurement sites were less than 120 microm and no statistically significant difference was found between direct and indirect method group in terms of marginal or internal fit (P > 0.05). But the direct method group showed better fit than indirect method group in terms of mesial surface, lingual surface, buccal surface and occlusal surface (P impression method had no significant effect on marginal fit of Cerec Blocs crowns, but it had certain effect on internal fit. Overall all-ceramic crowns appeared to have clinically acceptable marginal fit.

  10. Repeat CT assessed CTV variation and PTV margins for short- and long-course pre-operative RT of rectal cancer

    International Nuclear Information System (INIS)

    Nijkamp, Jasper; Swellengrebel, Maurits; Hollmann, Birgit; Jong, Rianne de; Marijnen, Corrie; Vliet-Vroegindeweij, Corine van; Triest, Baukelien van; Herk, Marcel van; Sonke, Jan-Jakob

    2012-01-01

    Purpose: To quantify the inter-fraction shape variation of the CTV in rectal-cancer patients treated with 5 × 5 (SCRT) and 25 × 2 Gy (LCRT) and derive PTV margins. Methods and materials: Thirty-three SCRT with daily repeat CT scans and 30 LCRT patients with daily scans during the first week followed by weekly scans were included. The CTV was delineated on all scans and local shape variation was calculated with respect to the planning CT. Margin estimation was done using the local shape variation to assure 95% minimum dose for at least 90% of patients. Results: Using 482 CT scans, systematic and random CTV shape variation was heterogeneous, ranging from 0.2 cm close to bony structures up to 1.0 cm SD at the upper-anterior CTV region. A significant reduction in rectal volume during LCRT resulted in an average 0.5 cm posterior shift of the upper-anterior CTV. Required margins ranged from 0.7 cm close to bony structures up to 3.1 and 2.3 cm in the upper-anterior region for SCRT and LCRT, respectively. Conclusions: Heterogeneous shape variation demands anisotropic PTV margins. Required margins were substantially larger in the anterior direction compared to current clinical margins. These larger margins were, however, based on strict delineated CTVs, resulting in smaller PTVs compared to current practice.

  11. Reconstructing Rodinia by Fitting Neoproterozoic Continental Margins

    Science.gov (United States)

    Stewart, John H.

    2009-01-01

    Reconstructions of Phanerozoic tectonic plates can be closely constrained by lithologic correlations across conjugate margins by paleontologic information, by correlation of orogenic belts, by paleomagnetic location of continents, and by ocean floor magmatic stripes. In contrast, Proterozoic reconstructions are hindered by the lack of some of these tools or the lack of their precision. To overcome some of these difficulties, this report focuses on a different method of reconstruction, namely the use of the shape of continents to assemble the supercontinent of Rodinia, much like a jigsaw puzzle. Compared to the vast amount of information available for Phanerozoic systems, such a limited approach for Proterozoic rocks, may seem suspect. However, using the assembly of the southern continents (South America, Africa, India, Arabia, Antarctica, and Australia) as an example, a very tight fit of the continents is apparent and illustrates the power of the jigsaw puzzle method. This report focuses on Neoproterozoic rocks, which are shown on two new detailed geologic maps that constitute the backbone of the study. The report also describes the Neoproterozoic, but younger or older rocks are not discussed or not discussed in detail. The Neoproterozoic continents and continental margins are identified based on the distribution of continental-margin sedimentary and magmatic rocks that define the break-up margins of Rodinia. These Neoproterozoic continental exposures, as well as critical Neo- and Meso-Neoproterozoic tectonic features shown on the two new map compilations, are used to reconstruct the Mesoproterozoic supercontinent of Rodinia. This approach differs from the common approach of using fold belts to define structural features deemed important in the Rodinian reconstruction. Fold belts are difficult to date, and many are significantly younger than the time frame considered here (1,200 to 850 Ma). Identifying Neoproterozoic continental margins, which are primarily

  12. Reliabilityy and operating margins of LWR fuels

    International Nuclear Information System (INIS)

    Strasser, A.A.; Lindquist, K.O.

    1977-01-01

    The margins to fuel thermal operating limits under normal and accident conditions are key to plant operating flexibility and impact on availability and capacity factor. Fuel performance problems that do not result in clad breach, can reduce these margins. However, most have or can be solved with design changes. Regulatory changes have been major factors in eroding these margins. Various methods for regaining the margins are discussed

  13. A Longitudinal View of the Relationship Between Social Marginalization and Obesity

    Science.gov (United States)

    Apolloni, Andrea; Marathe, Achla; Pan, Zhengzheng

    We use 3 Waves of the Add Health data collected between 1994 and 2002 to conduct a longitudinal study of the relationship between social marginalization and the weight status of adolescents and young adults. Past studies have shown that overweight and obese children are socially marginalized. This research tests (1) if this is true when we account for the sample size of each group, (2) does this phenomenon hold over time and (3) is it obesity or social marginalization that precedes in time. Our results show that when the sample size for each group is considered, the share of friendship is conforming to the size of the group. This conformity seems to increase over time as the population becomes more obese. Finally, we find that obesity precedes social marginalization which lends credence to the notion that obesity causes social marginalization and not vice versa.

  14. Iso-risk air no decompression limits after scoring marginal decompression sickness cases as non-events.

    Science.gov (United States)

    Murphy, F Gregory; Swingler, Ashleigh J; Gerth, Wayne A; Howle, Laurens E

    2018-01-01

    Decompression sickness (DCS) in humans is associated with reductions in ambient pressure that occur during diving, aviation, or certain manned spaceflight operations. Its signs and symptoms can include, but are not limited to, joint pain, radiating abdominal pain, paresthesia, dyspnea, general malaise, cognitive dysfunction, cardiopulmonary dysfunction, and death. Probabilistic models of DCS allow the probability of DCS incidence and time of occurrence during or after a given hyperbaric or hypobaric exposure to be predicted based on how the gas contents or gas bubble volumes vary in hypothetical tissue compartments during the exposure. These models are calibrated using data containing the pressure and respired gas histories of actual exposures, some of which resulted in DCS, some of which did not, and others in which the diagnosis of DCS was not clear. The latter are referred to as marginal DCS cases. In earlier works, a marginal DCS event was typically weighted as 0.1, with a full DCS event being weighted as 1.0, and a non-event being weighted as 0.0. Recent work has shown that marginal DCS events should be weighted as 0.0 when calibrating gas content models. We confirm this indication in the present work by showing that such models have improved performance when calibrated to data with marginal DCS events coded as non-events. Further, we investigate the ramifications of derating marginal events on model-prescribed air diving no-stop limits. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Margin of Valuation Error Among Nigerian Valuers: Postulating an ...

    African Journals Online (AJOL)

    Study on margin of error aims at capturing the response of Nigerian valuers and their clients from the financial sector to their permissable margin of error with a view to establishing the bracket outside which the valuer is considered incompetent. The opinion of 300 Estate Surveyors and Valuers were sampled using simple ...

  16. Time path of marginal cost for measures against global warming toward the greenhouse gas concentration target. Analytic solution and case study of the electric power sector; Onshitsu koka gas nodo mokuhyoka deno ondanka taisaku genkai hiyo no jikan keiro. Kaisekikai to denryoku bumon no case study

    Energy Technology Data Exchange (ETDEWEB)

    Nagano, K.; Sugiyama, H.; Takahashi, M. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1997-01-30

    The United Nations Framework Convention on Climate Change is studied from the viewpoint of implementing costs. As far as the global warming issue is concerned, the factor to affect the environment is not the emitted volume but the concentration in the air. The ultimate target is the stabilization of greenhouse gas concentration at a level not to impose serious artificial damage on the ecosystem. Accordingly, various time paths are considered, including one in which much emission is allowed at the beginning and suppression is enforced acceleratedly in the later stage. In this study, a path demanding but the minimal cost in the period up to the target time point is discussed, using as the tool the marginal cost for measure implementation. In a reasonable emission control strategy, the emission control marginal cost follows a time path that is dependent upon an increase function to be determined by the discount rate and survival rate (time constant) in the atmosphere. In the industrial branch, instead of imposing short-term and rigid emission volume control limits, a longer-term target may be set for reduction in the loads responsible for concentration acceleration, concrete emission controls under the given conditions may be implemented at the discretion of the implementing organizations, and reduction in cost may be realized by time distribution with the environmental impacts kept at approximately equal levels. 5 refs., 2 figs., 3 tabs.

  17. Photometric studies of two solar type marginal contact binaries in the Small Magellanic Cloud

    Science.gov (United States)

    Shanti Priya, Devarapalli; Rukmini, Jagirdar

    2018-04-01

    Using the Optical Gravitational Lensing Experiment catalogue, two contact binaries were studied using data in the V and I bands. The photometric solutions for the V and I bands are presented for two contact binaries OGLE 003835.24-735413.2 (V1) and OGLE 004619.65-725056.2 (V2) in Small Maglellanic Cloud. The presented light curves are analyzed using the Wilson-Devinney code. The results show that the variables are in good thermal and marginal geometrical contact with features like the O’Connell effect in V1. The absolute dimensions are estimated and its dynamical evolution is inferred. They tend to be solar type marginal contact binaries. The 3.6-m Devasthal Optical Telescope and the 4.0-m International Liquid Mirror Telescope of the Aryabhatta Research Institute of Observational Sciences (ARIES, Nainithal) can facilitate the continuous monitoring of such kind of objects which will help in finding the reasons behind their period changes and their impact on the evolution of the clusters.

  18. Seismic studies of crustal structure and tectonic evolution across the central California margin and the Colorado Plateau margin

    Science.gov (United States)

    Howie, John Mark

    This thesis presents results from two integrated deep-crustal seismic-reflection and wide-angle-reflection/refraction studies that improve our understanding of crustal structure and tectonic evolution in two tectonically active areas of the western United States. A multi-faceted approach to the study of crustal structure includes the use of compressional and shear wave seismic data. Supplementing the controlled source seismic observations with seismicity, gravity, heat flow, laboratory measurements and available geologic information allows a much improved understanding of crustal structure and tectonic evolution than would be available from the seismic data alone. Chapter 1 introduces the data integration strategy applied to the studies completed. In Chapter 2, an integrated crustal-velocity model across the south-central California margin west of the San Adreas fault is presented. The crustal structure defines tectonostratigraphic terranes 15 to 20 km thick underlain by a 6-km-thick high-velocity layer (6.8-7.0 km/s) interpreted as tectonically underplated oceanic crust. Structures defined in the oceanic crust indicate significant compressional and strike-slip deformation within the oceanic crust that probably formed during the final stages of subduction from 24-16 Ma. In Chapter 3, the crustal model from Chapter 2 is used as a constraint for models of the tectonic evolution of the Pacific-North American transform plate boundary. By combining the crustal structure with thermal models for asthenospheric upwelling associated with a slab-free window, I find that the mantle lithosphere east of the coast beneath south-central California probably delaminated from the oceanic crust, stranding the oceanic crust beneath the margin. In Chapter 4, results from a high-resolution reflection experiment in central Arizona across the southwestern edge of the Colorado Plateau address the relationship between strength of the crust and localization of extensional tectonism. A low

  19. Marginality and Variability in Esperanto.

    Science.gov (United States)

    Brent, Edmund

    This paper discusses Esperanto as a planned language and refutes three myths connected to it, namely, that Esperanto is achronical, atopical, and apragmatic. The focus here is on a synchronic analysis. Synchronic variability is studied with reference to the structuralist determination of "marginality" and the dynamic linguistic…

  20. Marginal cost application in the power industry

    International Nuclear Information System (INIS)

    Twardy, L.; Rusak, H.

    1994-01-01

    Two kind of marginal costs, the short-run and the long-run, are defined. The former are applied in conditions when the load increase is not accompanied neither by the increase of the transmission capacity not the installed capacity while the latter assume new investments to expand the power system. The long-run marginal costs be used to forecast optimized development of the system. They contain two main components: the marginal costs of capacity and the marginal costs of energy. When the long-run marginal costs are calculated, each component is considered for particular voltage levels, seasons of the year, hours of the day - selected depending on the system reliability factor as well as on its load level. In the market economy countries the long-run marginal costs can be used for setting up the electric energy tariffs. (author). 7 refs, 11 figs

  1. Is margin reduction in prostate cancer possible? a radiological modelling study

    International Nuclear Information System (INIS)

    Walsh, S.; Conneely, E.; Foley, M.; Moore, M.; Van der Putten, W.

    2013-01-01

    The full text of the publication follows. The principal objective of this study was to investigate the impact of organ motion, specifically for prostate cancer. This aim was achieved by the use of radiobiological models in order to evaluate the biological end-point response of a given Radiotherapy (RT) treatment plan. The models which were employed to evaluate the control of the cancer and late toxicity of healthy tissues, were the Marsden Tumour Control Probability (TCP) and the Lyman-Kutcher-Burman Normal Tissue Complication Probability (NTCP) models respectively. The dose distribution was calculated by Monte Carlo (MC) methods in the form of the EGSnrc packages, BEAMnrc and DOSXYZnrc. These MC simulation applications simulate the RT department of Galway University Hospitals linac. The simulation setup was designed for a typical six field treatment, delivered to a rectilinear water phantom. Both Conformal Radiotherapy and Ultra Conformal Radiotherapy treatments were simulated. Each voxel had an array of specific biological attributes assigned to it, including position due to inter fraction organ motion, provided by the Resonant Medical system, Clarity TM , for prostate localisation. The dose distribution deposited in the phantom, resulted in a dose value being ascribed to each individual voxel. The assigned tissue specific biology, combined with the dose value generated in the voxel, served as input parameters for the radiobiological models. In this way, patient and tumour specific data was integrated into the modelling process in the form of TCP/NTCP, elucidating to the planner/clinician as to what the most probable outcome of a given treatment regime will be. A comparison and analysis of the biological predictions will be presented. (author)

  2. Impacts of biogeographic history and marginal population genetics on species range limits: a case study of Liriodendron chinense.

    Science.gov (United States)

    Yang, Aihong; Dick, Christopher W; Yao, Xiaohong; Huang, Hongwen

    2016-05-10

    Species ranges are influenced by past climate oscillations, geographical constraints, and adaptive potential to colonize novel habitats at range limits. This study used Liriodendron chinense, an important temperate Asian tree species, as a model system to evaluate the roles of biogeographic history and marginal population genetics in determining range limits. We examined the demographic history and genetic diversity of 29 L. chinense populations using both chloroplast and nuclear microsatellite loci. Significant phylogeographic structure was recovered with haplotype clusters coinciding with major mountain regions. Long-term demographical stability was suggested by mismatch distribution analyses, neutrality tests, and ecological niche models (ENM) and suggested the existence of LGM refuges within mountain regions. Differences in genetic diversity between central and marginal populations were not significant for either genomic region. However, asymmetrical gene flow was inferred from central populations to marginal populations, which could potentially limit range adaptation and expansion of L. chinense.

  3. A Pilot Study on the Feasibility of Interventional Lung Volume Reduction

    International Nuclear Information System (INIS)

    Wang Wansheng; Dong Yonghua; Liu Bin; Zhu Chi; Yu Yongqiang

    2008-01-01

    The objective of this study was to evaluate the feasibility and safety of lung volume reduction by transbronchial alcohol and lipiodol suspension infusion with the aid of balloon-tipped catheter occlusion. Twenty-six healthy adult rabbits were divided into four treatment groups: alcohol and lipiodol suspension infusion (n = 8), lipiodol infusion (n = 8), alcohol infusion (n = 5), or bronchial lumen occlusion (n = 5). After selective lobar or segmental bronchial catheterization using a balloon-tipped occlusion catheter, the corresponding drug infusion was performed. Bone cement was used to occlude the bronchial lumen in the occlusion group. The animals were followed up for 10 weeks by chest X-ray and computed tomography (CT), and then the whole lungs were harvested for histological examination. Alcohol and lipiodol suspension or lipiodol could be stably retained in alveoli in the first two groups based on chest X-ray and CT, but obvious collapse only occurred in the group receiving alcohol and lipiodol suspension or the bronchial lumen occlusion group. Histological examination revealed damage and disruption of the alveolar epithelium and fibrosis in related lung tissue in the group receiving alcohol and lipiodol suspension. Similar changes were seen in the bronchial lumen occlusion group, apart from obvious marginal emphysema of the target areas in two animals. Interstitial pneumonia and dilated alveoli existed in some tissue in target areas in the lipiodol group, in which pulmonary fibrosis obliterating alveoli also occurred. Chronic alveolitis and pleural adhesion in target areas occurred in the group infused with alcohol alone, whereas visceral pleura of the other three groups was regular and no pleural effusion or adhesion was found. Alcohol and lipiodol suspension that is stably retained in alveoli can result in significant lung volume reduction. Through alcohol and lipiodol suspension infusion, obstructive emphysema or pneumonia arising from bronchial lumen

  4. Factors controlling late Cenozoic continental margin growth from the Ebro Delta to the western Mediterranean deep sea

    Science.gov (United States)

    Nelson, C.H.; Maldonado, A.

    1990-01-01

    controls on Ebro margin growth. Deforestation of the drainage basin more than doubled the normal Holocene sediment supply, and construction of dams then reduced the supply by 95%. This reduction of the past 50 years has caused erosion of the delta and contamination of bottom sediment because normal Holocene sediment discharge is not available to prograde the delta or help dilute pollutants. ?? 1990.

  5. Low-Cost Radon Reduction Pilot Study

    Energy Technology Data Exchange (ETDEWEB)

    Rose, William B. [Partnership for Advanced Residential Retrofit, Champaign, IL (United States); Francisco, Paul W. [Partnership for Advanced Residential Retrofit, Champaign, IL (United States); Merrin, Zachary [Partnership for Advanced Residential Retrofit, Champaign, IL (United States)

    2015-09-01

    The aim of the research was to conduct a primary scoping study on the impact of air sealing between the foundation and the living space on radon transport reduction across the foundation-living space floor assembly. Fifteen homes in the Champaign, Illinois area participated in the study. These homes were instrumented for hourly continuous radon measurements and simultaneous temperature and humidity the foundation was improved. However, this improved isolation did not lead to significant reductions in radon concentration in the living space. Other factors such as outdoor temperature were shown to have an impact on radon concentration.

  6. Seismic margin analysis technique for nuclear power plant structures

    International Nuclear Information System (INIS)

    Seo, Jeong Moon; Choi, In Kil

    2001-04-01

    In general, the Seismic Probabilistic Risk Assessment (SPRA) and the Seismic Margin Assessment(SAM) are used for the evaluation of realistic seismic capacity of nuclear power plant structures. Seismic PRA is a systematic process to evaluate the seismic safety of nuclear power plant. In our country, SPRA has been used to perform the probabilistic safety assessment for the earthquake event. SMA is a simple and cost effective manner to quantify the seismic margin of individual structural elements. This study was performed to improve the reliability of SMA results and to confirm the assessment procedure. To achieve this goal, review for the current status of the techniques and procedures was performed. Two methodologies, CDFM (Conservative Deterministic Failure Margin) sponsored by NRC and FA (Fragility Analysis) sponsored by EPRI, were developed for the seismic margin review of NPP structures. FA method was originally developed for Seismic PRA. CDFM approach is more amenable to use by experienced design engineers including utility staff design engineers. In this study, detailed review on the procedures of CDFM and FA methodology was performed

  7. Marginal Accuracy of Castings Produced with Different Investment Systems.

    Science.gov (United States)

    Yadav, R K

    2009-04-01

    The use of casting ring to produce accurate castings has been challenged with the introduction of a ringless casting technique. This study compared the marginal accuracy of all - metal complete coverage crowns fabricated with ringless, split plastic ring and metal ring investment systems. A total of 40 all- metal complete coverage crowns were fabricated on a metal die. The crowns were divided in 4 groups (Group A, B, C and D) of 10 patterns each. A ringless system of investing and casting was used for group A whereas a split plastic ring system was used for group B. Groups C and D utilized metal ring with single and double layers of asbestos free cellulose acetate liner respectively for investing and casting procedures. The restorations were seated on the metal die and the vertical marginal discrepancy was evaluated by measuring the gap between the finish line on the die and the margins of the crown on four specific sites with an optical microscope. Statistical analysis was carried out using ANOVA and multiple comparison "t" test. The mean vertical marginal discrepancy for groups A, B, C and D was 95μm, 136μm, 128μm and 104μm respectively. Vertical marginal discrepancy on each surface was compared among the four groups. Difference of vertical marginal discrepancy on buccal surface (p0.05). Accurate castings with better marginal fit can be produced with ringless casting technique.

  8. Marginal adaptation of composite resins under two adhesive techniques.

    Science.gov (United States)

    Dačić, Stefan; Veselinović, Aleksandar M; Mitić, Aleksandar; Nikolić, Marija; Cenić, Milica; Dačić-Simonović, Dragica

    2016-11-01

    In the present research, different adhesive techniques were used to set up fillings with composite resins. After the application of etch and rinse or self etch adhesive technique, marginal adaptation of composite fillings was estimated by the length of margins without gaps, and by the microretention of resin in enamel and dentin. The study material consisted of 40 extracted teeth. Twenty Class V cavities were treated with 35% phosphorous acid and restored after rinsing by Adper Single Bond 2 and Filtek Ultimate-ASB/FU 3M ESPE composite system. The remaining 20 cavities were restored by Adper Easy One-AEO/FU 3M ESPE composite system. Marginal adaptation of composite fillings was examined using a scanning electron microscope (SEM). The etch and rinse adhesive technique showed a significantly higher percentage of margin length without gaps (in enamel: 92.5%, in dentin: 57.3%), compared with the self-etch technique with lower percentage of margin length without gaps, in enamel 70.4% (p resin tugs in interprismatic spaces of enamel, while the dentin microretention was composed of adhesive and hybrid layers with resin tugs in dentin canals. In the second technique, resin tugs were rarely seen and a microgap was dominant along the border of restoration margins. The SEM analysis showed a better marginal adaptation of composite resin to enamel and dentin with better microretention when the etch and rinse adhesive procedure was applied. © 2016 Wiley Periodicals, Inc.

  9. Influence of Different Ceramic Systems on Marginal Misfit.

    Science.gov (United States)

    Vargas, S P; Neves, A C C; Vitti, R; Amaral, M; Henrique, M N; Silva-Concílio, L R

    2017-09-01

    the aim of this study was to evaluate the marginal misfit at the interface between a ceramic coping and its abutment. Twenty-four specimens were made with solid abutments. The specimens were divided into 3 groups according to the ceramic system (n = 8): Lava (zirconia), IPS e.max Press (lithium disilicate), and IPS Empress Esthetic (leucite). All copings were cemented with resin luting agent (RelyX U200) and the marginal misfit were evaluated at 3 different times: initial, after cementation, and after mechanical cycling using a linear measuring microscope (Measuring Microscope STM-Olympus) at a magnification of 40x. All specimens were subjected to mechanical cycling (1 million cycles) by an universal testing machine (Instron 8800). The results were statistically analyzed using Analysis of Variance and Student's t-test (α = 0.05). all groups showed an increase in the marginal misfit after cementation. The lithium disilicate group demonstrated the lowest interacial gap values at each evaluation (p = 0.001). The zirconia and leucite groups showed similar interfacial gap values (initial, p = 0.244; and post cementation, p = 0.751). the cementation increase the marginal misfit, but the mechanical cycling did not influence the marginal misfit of the ceramics systems evaluated. Copyright© 2017 Dennis Barber Ltd.

  10. Workers' marginal costs of commuting

    DEFF Research Database (Denmark)

    van Ommeren, Jos; Fosgerau, Mogens

    2009-01-01

    This paper applies a dynamic search model to estimate workers' marginal costs of commuting, including monetary and time costs. Using data on workers' job search activity as well as moving behaviour, for the Netherlands, we provide evidence that, on average, workers' marginal costs of one hour...

  11. Financial Performance of Hospitals in the Mississippi Delta Region Under the Hospital Readmissions Reduction Program and Hospital Value-based Purchasing Program.

    Science.gov (United States)

    Chen, Hsueh-Fen; Karim, Saleema; Wan, Fei; Nevola, Adrienne; Morris, Michael E; Bird, T Mac; Tilford, J Mick

    2017-11-01

    Previous studies showed that the Hospital Readmissions Reduction Program (HRRP) and the Hospital Value-based Purchasing Program (HVBP) disproportionately penalized hospitals caring for the poor. The Mississippi Delta Region (Delta Region) is among the most socioeconomically disadvantaged areas in the United States. The financial performance of hospitals in the Delta Region under both HRRP and HVBP remains unclear. To compare the differences in financial performance under both HRRP and HVBP between hospitals in the Delta Region (Delta hospitals) and others in the nation (non-Delta hospitals). We used a 7-year panel dataset and applied difference-in-difference models to examine operating and total margin between Delta and non-Delta hospitals in 3 time periods: preperiod (2008-2010); postperiod 1 (2011-2012); and postperiod 2 (2013-2014). The Delta hospitals had a 0.89% and 4.24% reduction in operating margin in postperiods 1 and 2, respectively, whereas the non-Delta hospitals had 1.13% and 1% increases in operating margin in postperiods 1 and 2, respectively. The disparity in total margins also widened as Delta hospitals had a 1.98% increase in postperiod 1, but a 0.30% reduction in postperiod 2, whereas non-Delta hospitals had 1.27% and 2.28% increases in postperiods 1 and 2, respectively. The gap in financial performance between Delta and non-Delta hospitals widened following the implementation of HRRP and HVBP. Policy makers should modify these 2 programs to ensure that resources are not moved from the communities that need them most.

  12. Quantifying Safety Margin Using the Risk-Informed Safety Margin Characterization (RISMC)

    Energy Technology Data Exchange (ETDEWEB)

    Grabaskas, David; Bucknor, Matthew; Brunett, Acacia; Nakayama, Marvin

    2015-04-26

    The Risk-Informed Safety Margin Characterization (RISMC), developed by Idaho National Laboratory as part of the Light-Water Reactor Sustainability Project, utilizes a probabilistic safety margin comparison between a load and capacity distribution, rather than a deterministic comparison between two values, as is usually done in best-estimate plus uncertainty analyses. The goal is to determine the failure probability, or in other words, the probability of the system load equaling or exceeding the system capacity. While this method has been used in pilot studies, there has been little work conducted investigating the statistical significance of the resulting failure probability. In particular, it is difficult to determine how many simulations are necessary to properly characterize the failure probability. This work uses classical (frequentist) statistics and confidence intervals to examine the impact in statistical accuracy when the number of simulations is varied. Two methods are proposed to establish confidence intervals related to the failure probability established using a RISMC analysis. The confidence interval provides information about the statistical accuracy of the method utilized to explore the uncertainty space, and offers a quantitative method to gauge the increase in statistical accuracy due to performing additional simulations.

  13. Pathology of nodal marginal zone lymphomas.

    Science.gov (United States)

    Pileri, Stefano; Ponzoni, Maurilio

    Nodal marginal zone B cell lymphomas (NMZLs) are a rare group of lymphoid disorders part of the spectrum of marginal zone B-cell lymphomas, which encompass splenic marginal one B-cell lymphoma (SMZL) and extra nodal marginal zone of B-cell lymphoma (EMZL), often of MALT-type. Two clinicopathological forms of NMZL are recognized: adult-type and pediatric-type, respectively. NMZLs show overlapping features with other types of MZ, but distinctive features as well. In this review, we will focus on the salient distinguishing features of NMZL mostly under morphological/immunophenotypical/molecular perspectives in views of the recent acquisitions and forthcoming updated 2016 WHO classification of lymphoid malignancies. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Analysis of safety margins for PuO2 containers

    International Nuclear Information System (INIS)

    Hubert, P.; Tomachevsky, E.

    1987-11-01

    In the regular manner the containers for PuO 2 transport are type B(U) and give satisfaction to the AIEA proofs. However the vigour of this conception's containers and the analysis of other radioactive containers permit to think that large safety margins exist. In this paper, the importance and the kind of these margins are studied [fr

  15. Tumor-related markers in histologically normal margins correlate with locally recurrent oral squamous cell carcinoma: a retrospective study.

    Science.gov (United States)

    Wang, Xinhong; Chen, Si; Chen, Xinming; Zhang, Cuicui; Liang, Xueyi

    2016-02-01

    Oral squamous cell carcinoma (OSCC) is characterized by a high rate of local recurrence (LR) even when the surgical margins are considered histopathologically 'normal'. The aim of our study was to determine the relationship between early tumor-related markers detected in histologically normal margins (HNM) and LR as well as disease-free survival in OSCC. The loss of heterozygosity (LOH) of markers on 9p21 (D9s1747, RPS6, D9s162) and 17p13 (TP53) and the immunostaining results of the corresponding mutant P53, P14, P15, and P16 proteins were assessed and correlated with LR and disease-free survival in 71 OSCC patients who had HNM. Fifteen of 71 patients with HNM developed LR. The presence of the following molecular markers in surgical margins was significantly correlated with the development of LR: LOH on chromosome 9p21 (D9s1747 + RPS6 + D9s162), any LOH, P16, and P53 (chi-square test, P tumor-related markers in histologically 'normal' resection margins may be a useful method for assessing LR in OSCC patients. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  16. Criticality safety margins for mixtures of fissionable materials

    International Nuclear Information System (INIS)

    Williamson, T.G.; Mincey, J.F.

    1992-01-01

    In the determination of criticality safety margins, approximations for combinations of fissile and fissionable isotopes are sometimes used that go by names such as the rule of fractions or equivalency relations. Use of the rule of fractions to ensure criticality safety margins was discussed in an earlier paper. The purpose of this paper is to correct errors and to clarify some of the implications. Deviations of safety margins from those calculated by the rule of fractions are still noted; however, the deviations are less severe. Caution in applying such rules is still urged. In general, these approximations are based on American National Standard ANSI/ANS-8.15, Sec. 5.2. This section allows that ratios of material masses to their limits may be summed for fissile nuclides in aqueous solutions. It also allows the addition of nonfissile nuclides if an aqueous moderator is present and addresses the effects of infinite water or equivalent reflector. Water-reflected binary combinations of aqueous solutions of fissile materials, as well as binary combinations of fissile and fissionable metals, were considered. Some combinations were shown to significantly decrease the margin of subcriticality compared to the single-unit margins. In this study, it is confirmed that some combinations of metal units in an optimum geometry may significantly decrease the margin of subcriticality. For some combinations of aqueous solutions of fissile materials, the margin of subcriticality may also be reduced by very small amounts. The conclusion of Ref. 1 that analysts should be careful in applying equivalency relations for combining materials remains valid and sound advice. The ANSI/ANS standard, which allows the use of ratios of masses to their limits, applies to aqueous, fully water-reflected, single-unit solutions. Extensions to other situations should be considered with extreme care

  17. Comparative Evaluation of Marginal Discrepancy in Tooth Colored Self Cure Acrylic Provisional Restorations With and Without Reinforcement of Glass Beads: An In-Vitro Study.

    Science.gov (United States)

    Yasangi, Manoj Kumar; Mannem, Dhanalakshmi; Bommireddy, Vikram Simha; Neturi, Sirisha; Ravoori, Srinivas; Jyothi

    2015-05-01

    This invitro study was conducted to compare and evaluate marginal discrepancy in two types of tooth colored self cure provisional restorative materials {DPI&UNIFAST TRAD} before and after reinforcement of glass beads. The aim of the present study was to evaluate and compare marginal discrepancy in two types of provisional restorative materials (DPI and UNI FAST TRAD) before and after reinforcement with Glass beads. Tooth shaped resin copings were fabricated on custom made brass metal die. A total of 60 resin copings were fabricated in which 30 samples were prepared with DPI and 30 samples with UNIFAST material. Each group of 30 samples were divided in to two sub groups in which 15 samples were prepared with glass bead reinforcement and 15 samples without reinforcement. The marginal discrepancy was evaluated with photomicroscope {Reichet Polyvar 2 met} by placing the resin copings on custom made brass resin coping holder. Measurements obtained were statistically analysed by unpaired t-test to know any significance between two variables. Unreinforced DPI specimens had shown lower marginal discrepancy (442.82) than reinforced specimens (585.77). Unreinforced UNIFAST specimens have shown high values of marginal discrepancy (592.83) than reinforced specimens (436.35). p-value between reinforced and unreinforced specimens of DPI (p=0.0013) and UNIFAST (p= 0.0038) has shown statistical significance. This in-vitro study revealed that unreinforced DPI specimens have shown lower marginal discrepancy than reinforced specimens and unreinforced UNIFAST specimens have shown higher values of marginal discrepancy than reinforced specimens.

  18. Comparative Evaluation of Marginal Discrepancy in Tooth Colored Self Cure Acrylic Provisional Restorations With and Without Reinforcement of Glass Beads: An In-Vitro Study

    Science.gov (United States)

    Yasangi, Manoj Kumar; Mannem, Dhanalakshmi; Neturi, Sirisha; Ravoori, Srinivas; Jyothi

    2015-01-01

    Context This invitro study was conducted to compare and evaluate marginal discrepancy in two types of tooth colored self cure provisional restorative materials {DPI&UNIFAST TRAD} before and after reinforcement of glass beads. Aim The aim of the present study was to evaluate and compare marginal discrepancy in two types of provisional restorative materials (DPI and UNI FAST TRAD) before and after reinforcement with Glass beads. Materials and Methods Tooth shaped resin copings were fabricated on custom made brass metal die. A total of 60 resin copings were fabricated in which 30 samples were prepared with DPI and 30 samples with UNIFAST material. Each group of 30 samples were divided in to two sub groups in which 15 samples were prepared with glass bead reinforcement and 15 samples without reinforcement. The marginal discrepancy was evaluated with photomicroscope {Reichet Polyvar 2 met} by placing the resin copings on custom made brass resin coping holder. Results Measurements obtained were statistically analysed by unpaired t-test to know any significance between two variables. Unreinforced DPI specimens had shown lower marginal discrepancy (442.82) than reinforced specimens (585.77). Unreinforced UNIFAST specimens have shown high values of marginal discrepancy (592.83) than reinforced specimens (436.35). p-value between reinforced and unreinforced specimens of DPI (p=0.0013) and UNIFAST (p= 0.0038) has shown statistical significance. Conclusion This in-vitro study revealed that unreinforced DPI specimens have shown lower marginal discrepancy than reinforced specimens and unreinforced UNIFAST specimens have shown higher values of marginal discrepancy than reinforced specimens. PMID:26155574

  19. PENDIDIKAN ALTERNATIF UNTUK PEREMPUAN MARGINAL DI PEDESAAN

    Directory of Open Access Journals (Sweden)

    Ratnawati Tahir

    2011-11-01

    Full Text Available Abstract: Alternative Education for Marginalized Women in Rural Areas. The study aims to find alter­native forms of education for marginalized women, the process of forming study groups and gender based learning process that serves the center of the development of education, leadership and a source of economic empowerment. The study uses qualitative methods, involving a group of women who have attended an al­ternative education. Researchers and informants from community leaders. The results showed that the form of alternative education is a method of adult education or andragogy. Study groups consisted of basic literacy and functional literacy. The learning process begins with the sharing of learning, reflection on life experience and role play method. The result is 65% of participants have increased the ability of reading, writing and numeracy, and understanding of the issues of women who have confidence in the decision making of households and communities. Abstrak: Pendidikan Alternatif untuk Perempuan Marginal di Pedesaan. Penelitian ini bertujuan mengetahui bentuk pendidikan alternatif untuk perempuan marginal, proses pembentukan kelompok belajar, dan proses pembelajaran berperspektif gender yang berfungsi menjadi pusat pengembangan pendidikan, kepemimpinan, dan sumber penguatan ekonomi. Penelitian menggunakan metode kualitatif, mengambil satu kelompok perempuan yang telah mengikuti pendidikan alternatif. Informan terdiri atas tokoh masyarakat, seperti Kepala Desa, Ketua RT/RW, dan ibu rumah tangga. Hasil penelitian menunjukkan bahwa bentuk pembelajaran pendidikan alternatif adalah metode pendidikan orang dewasa atau andragogy. Pembentukan kelompok belajar terdiri atas; kelompok baca tulis dan keaksaraan fungsional. Proses pembe­lajaran dimulai dengan sharing pembelajaran, refleksi pengalaman hidup, dan metode role play. Hasilnya 65% peserta pembelajaran mengalami peningkatan kemampuan membaca, menulis, dan berhitung, serta pema

  20. Impact of inter- and intrafraction deviations and residual set-up errors on PTV margins. Different alignment techniques in 3D conformal prostate cancer radiotherapy

    International Nuclear Information System (INIS)

    Langsenlehner, T.; Doeller, C.; Winkler, P.; Kapp, K.S.; Galle, G.

    2013-01-01

    The aim of this work was to analyze interfraction and intrafraction deviations and residual set-up errors (RSE) after online repositioning to determine PTV margins for 3 different alignment techniques in prostate cancer radiotherapy. The present prospective study included 44 prostate cancer patients with implanted fiducials treated with three-dimensional (3D) conformal radiotherapy. Daily localization was based on skin marks followed by marker detection using kilovoltage (kV) imaging and subsequent patient repositioning. Additionally, in-treatment megavoltage (MV) images were obtained for each treatment field. In an off-line analysis of 7,273 images, interfraction prostate motion, RSE after marker-based prostate localization, prostate position during each treatment session, and the effect of treatment time on intrafraction deviations were analyzed to evaluate PTV margins. Margins accounting for interfraction deviation, RSE and intrafraction motion were 14.1, 12.9, and 15.1 mm in anterior-posterior (AP), superior-inferior (SI), and left-right (LR) direction for skin mark alignment and 9.6, 8.7, and 2.6 mm for bony structure alignment, respectively. Alignment to implanted markers required margins of 4.6, 2.8, and 2.5 mm. As margins to account for intrafraction motion increased with treatment prolongation PTV margins could be reduced to 3.9, 2.6, and 2.4 mm if treatment time was ≤ 4 min. With daily online correction and repositioning based on implanted fiducials, a significant reduction of PTV margins can be achieved. The use of an optimized workflow with faster treatment techniques such as volumetric modulated arc techniques (VMAT) could allow for a further decrease. (orig.)

  1. Energy system analyses of the marginal energy technology in life cycle assessments

    DEFF Research Database (Denmark)

    Mathiesen, B.V.; Münster, Marie; Fruergaard, Thilde

    2007-01-01

    in historical and potential future energy systems. Subsequently, key LCA studies of products and different waste flows are analysed in relation to the recom- mendations in consequential LCA. Finally, a case of increased waste used for incineration is examined using an energy system analysis model......In life cycle assessments consequential LCA is used as the “state-of-the-art” methodology, which focuses on the consequences of decisions made in terms of system boundaries, allocation and selection of data, simple and dynamic marginal technology, etc.(Ekvall & Weidema 2004). In many LCA studies...... marginal technology? How is the marginal technology identified and used today? What is the consequence of not using energy system analy- sis for identifying the marginal energy technologies? The use of the methodology is examined from three angles. First, the marginal electricity technology is identified...

  2. Realistic respiratory motion margins for external beam partial breast irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Conroy, Leigh; Quirk, Sarah [Department of Medical Physics, Tom Baker Cancer Centre, Calgary, Alberta T2N 4N2 (Canada); Department of Physics and Astronomy, University of Calgary, Calgary, Alberta T2N 1N4 (Canada); Smith, Wendy L., E-mail: wendy.smith@albertahealthservices.ca [Department of Medical Physics, Tom Baker Cancer Centre, Calgary, Alberta T2N 4N2 (Canada); Department of Physics and Astronomy, University of Calgary, Calgary, Alberta T2N 1N4 (Canada); Department of Oncology, University of Calgary, Calgary, Alberta T2N 1N4 (Canada)

    2015-09-15

    Purpose: Respiratory margins for partial breast irradiation (PBI) have been largely based on geometric observations, which may overestimate the margin required for dosimetric coverage. In this study, dosimetric population-based respiratory margins and margin formulas for external beam partial breast irradiation are determined. Methods: Volunteer respiratory data and anterior–posterior (AP) dose profiles from clinical treatment plans of 28 3D conformal radiotherapy (3DCRT) PBI patient plans were used to determine population-based respiratory margins. The peak-to-peak amplitudes (A) of realistic respiratory motion data from healthy volunteers were scaled from A = 1 to 10 mm to create respiratory motion probability density functions. Dose profiles were convolved with the respiratory probability density functions to produce blurred dose profiles accounting for respiratory motion. The required margins were found by measuring the distance between the simulated treatment and original dose profiles at the 95% isodose level. Results: The symmetric dosimetric respiratory margins to cover 90%, 95%, and 100% of the simulated treatment population were 1.5, 2, and 4 mm, respectively. With patient set up at end exhale, the required margins were larger in the anterior direction than the posterior. For respiratory amplitudes less than 5 mm, the population-based margins can be expressed as a fraction of the extent of respiratory motion. The derived formulas in the anterior/posterior directions for 90%, 95%, and 100% simulated population coverage were 0.45A/0.25A, 0.50A/0.30A, and 0.70A/0.40A. The differences in formulas for different population coverage criteria demonstrate that respiratory trace shape and baseline drift characteristics affect individual respiratory margins even for the same average peak-to-peak amplitude. Conclusions: A methodology for determining population-based respiratory margins using real respiratory motion patterns and dose profiles in the AP direction was

  3. Realistic respiratory motion margins for external beam partial breast irradiation

    International Nuclear Information System (INIS)

    Conroy, Leigh; Quirk, Sarah; Smith, Wendy L.

    2015-01-01

    Purpose: Respiratory margins for partial breast irradiation (PBI) have been largely based on geometric observations, which may overestimate the margin required for dosimetric coverage. In this study, dosimetric population-based respiratory margins and margin formulas for external beam partial breast irradiation are determined. Methods: Volunteer respiratory data and anterior–posterior (AP) dose profiles from clinical treatment plans of 28 3D conformal radiotherapy (3DCRT) PBI patient plans were used to determine population-based respiratory margins. The peak-to-peak amplitudes (A) of realistic respiratory motion data from healthy volunteers were scaled from A = 1 to 10 mm to create respiratory motion probability density functions. Dose profiles were convolved with the respiratory probability density functions to produce blurred dose profiles accounting for respiratory motion. The required margins were found by measuring the distance between the simulated treatment and original dose profiles at the 95% isodose level. Results: The symmetric dosimetric respiratory margins to cover 90%, 95%, and 100% of the simulated treatment population were 1.5, 2, and 4 mm, respectively. With patient set up at end exhale, the required margins were larger in the anterior direction than the posterior. For respiratory amplitudes less than 5 mm, the population-based margins can be expressed as a fraction of the extent of respiratory motion. The derived formulas in the anterior/posterior directions for 90%, 95%, and 100% simulated population coverage were 0.45A/0.25A, 0.50A/0.30A, and 0.70A/0.40A. The differences in formulas for different population coverage criteria demonstrate that respiratory trace shape and baseline drift characteristics affect individual respiratory margins even for the same average peak-to-peak amplitude. Conclusions: A methodology for determining population-based respiratory margins using real respiratory motion patterns and dose profiles in the AP direction was

  4. Prevalence, risk factors and outcomes of velamentous and marginal cord insertions: a population-based study of 634,741 pregnancies.

    Directory of Open Access Journals (Sweden)

    Cathrine Ebbing

    Full Text Available OBJECTIVES: To determine the prevalence of, and risk factors for anomalous insertions of the umbilical cord, and the risk for adverse outcomes of these pregnancies. DESIGN: Population-based registry study. SETTING: Medical Birth Registry of Norway 1999-2009. POPULATION: All births (gestational age >16 weeks to <45 weeks in Norway (623,478 singletons and 11,263 pairs of twins. METHODS: Descriptive statistics and odds ratios (ORs for risk factors and adverse outcomes based on logistic regressions adjusted for confounders. MAIN OUTCOME MEASURES: Velamentous or marginal cord insertion. Abruption of the placenta, placenta praevia, pre-eclampsia, preterm birth, operative delivery, low Apgar score, transferral to neonatal intensive care unit (NICU, malformations, birthweight, and perinatal death. RESULTS: The prevalence of abnormal cord insertion was 7.8% (1.5% velamentous, 6.3% marginal in singleton pregnancies and 16.9% (6% velamentous, 10.9% marginal in twins. The two conditions shared risk factors; twin gestation and pregnancies conceived with the aid of assisted reproductive technology were the most important, while bleeding in pregnancy, advanced maternal age, maternal chronic disease, female foetus and previous pregnancy with anomalous cord insertion were other risk factors. Velamentous and marginal insertion was associated with an increased risk of adverse outcomes such as placenta praevia (OR = 3.7, (95% CI = 3.1-4.6, and placental abruption (OR = 2.6, (95% CI = 2.1-3.2. The risk of pre-eclampsia, preterm birth and delivery by acute caesarean was doubled, as was the risk of low Apgar score, transferral to NICU, low birthweight and malformations. For velamentous insertion the risk of perinatal death at term was tripled, OR = 3.3 (95% CI = 2.5-4.3. CONCLUSION: The prevalence of velamentous and marginal insertions of the umbilical cord was 7.8% in singletons and 16.9% in twin gestations, with marginal insertion being more

  5. Assessment of Biomass Resources from Marginal Lands in APEC Economies

    Energy Technology Data Exchange (ETDEWEB)

    Milbrandt, A.; Overend, R. P.

    2009-08-01

    The goal of this study is to examine the marginal lands in Asia-Pacific Economic Cooperation (APEC) economies and evaluate their biomass productivity potential. Twelve categories of marginal lands are identified using the Global Agro-Ecological Zones system of the United Nations Food and Agriculture Organization.

  6. Street Sex Work: Re/Constructing Discourse from Margin to Center

    Science.gov (United States)

    McCracken, Jill Linnette

    2009-01-01

    Newspaper media create interpretations of marginalized groups that require rhetorical analysis so that we can better understand these representations. This article focuses on how newspaper articles create interpretations of sex work that affect both the marginalized and mainstream communities. My ethnographic case study argues that the material…

  7. Study to Determine Adequate Margins in Radiotherapy Planning for Esophageal Carcinoma by Detailing Patterns of Recurrence After Definitive Chemoradiotherapy

    International Nuclear Information System (INIS)

    Button, Michael R.; Morgan, Carys A.; Croydon, Elizabeth S.; Roberts, S. Ashley; Crosby, Thomas D.L.

    2009-01-01

    Purpose: To ascertain the adequacy of radiotherapy (RT) margins by studying the relapse patterns after definitive chemoradiotherapy for carcinoma of the esophagus. Methods and Materials: We performed a retrospective study assessing the first site of disease relapse after definitive chemoradiotherapy that included four 3-weekly cycles of cisplatin and continuous infusion 5-fluorouracil, with conformal RT (50 Gy in 25 fractions) concurrent with Cycles 3 and 4. The RT planning target volume was the endoscopic ultrasonography/computed tomography-defined gross tumor volume with 1.5-cm lateral and 3-cm superoinferior margins. Results: A total of 145 patients were included. Their average age was 65.4 years, 45% had adenocarcinoma, 61% had lower third esophageal tumors, and 75% had Stage III-IVA disease. After RT, of 142 patients, 85 (60%) had evidence of relapse at a median follow-up of 18 months. The relapse was local (within the RT field) in 55; distant (metastatic) in 13, and a combination of local and distant in 14. The local relapse rates were not influenced by tumor stage, lymph node status, or disease length. Three patients developed a relapse in regions adjacent to the RT fields; however, it is unlikely that larger field margins would have been clinically acceptable or effective in these cases. The median overall survival was 15 months. Conclusion: The gross tumor volume-planning target volume margins in this study appeared adequate. Future efforts to improve outcomes using definitive chemoradiotherapy should be directed toward reducing the high rates of in-field and distant relapses

  8. In vitro evaluation of the marginal fit of different all-ceramic crowns

    Directory of Open Access Journals (Sweden)

    Munir Tolga Yucel

    2013-09-01

    Conclusion: In-Ceram all-ceramic crowns showed the largest marginal gap, and Celay crowns showed the smallest marginal gap in both die groups. The marginal discrepancies found in this study were all within the clinically acceptable standard of 120 μm.

  9. Effect of post-implant edema on prostate brachytherapy treatment margins

    International Nuclear Information System (INIS)

    Reed, Daniel R.; Wallner, Kent; Ford, Eric; Mueller, Amy; Merrick, Gregory; Maki, Jeffrey; Sutlief, Steven; Butler, Wayne

    2005-01-01

    Purpose: To determine if postimplant prostate brachytherapy treatment margins calculated on Day 0 differ substantially from those calculated on Day 30. Methods: Thirty patients with 1997 American Joint Commission on Cancer clinical stage T1-T2 prostatic carcinoma underwent prostate brachytherapy with I-125 prescribed to 144 Gy. Treatment planning methods included using loose seeds in a modified peripheral loading pattern and treatment margins (TMs) of 5-8 mm. Postimplant plain radiographs, computed tomography scans, and magnetic resonance scans were obtained 1-4 hours after implantation (Day 0). A second set of imaging studies was obtained at 30 days after implantation (Day 30) and similarly analyzed. Treatment margins were measured as the radial distance in millimeters from the prostate edge to the 100% isodose line. The TMs were measured and tabulated at 90 o intervals around the prostate periphery at 0.6-cm intervals. Each direction was averaged to obtain the mean anterior, posterior, left, and right margins. Results: The mean overall TM increased from 2.6 mm (±2.3) on Day 0 to 3.5 mm (±2.4) on Day 30. The mean anterior margin increased from 1.2 mm on Day 0 to 1.8 mm on Day 30. The posterior margin increased from 1.2 mm on Day 0 to 2.8 mm on Day 30. The lateral treatment margins increased most over time, with mean right treatment margin increasing from 3.9 mm on Day 0 to 4.7 mm on Day 30. Conclusion: Treatment margins appear to be durable in the postimplant period, with a clinically insignificant increase from Day 0 to Day 30

  10. Calculating the marginal costs of a district-heating utility

    International Nuclear Information System (INIS)

    Sjoedin, Joergen; Henning, Dag

    2004-01-01

    District heating plays an important role in the Swedish heat-market. At the same time, the price of district heating varies considerably among different district-heating utilities. A case study is performed here in which a Swedish utility is analysed using three different methods for calculating the marginal costs of heat supply: a manual spreadsheet method, an optimising linear-programming model, and a least-cost dispatch simulation model. Calculated marginal-costs, obtained with the three methods, turn out to be similar. The calculated marginal-costs are also compared to the actual heat tariff in use by the utility. Using prices based on marginal costs should be able to bring about an efficient resource-allocation. It is found that the fixed rate the utility uses today should be replaced by a time-of-use rate, which would give a more accurate signal for customers to change their heat consumptions. (Author)

  11. Risk insights from seismic margin reviews

    International Nuclear Information System (INIS)

    Budnitz, R.J.

    1990-01-01

    This paper discusses the information that has been derived from the three seismic-margin reviews conducted so far, and the information that is potentially available from using the seismic-margin method more generally. There are two different methodologies for conducting seismic margin reviews of nuclear power plants, one developed under NRC sponsorship and one developed under sponsorship of the Electric Power Research Institute. Both methodologies will be covered in this paper. The paper begins with a summary of the steps necessary to complete a margin review, and will then outline the key technical difficulties that need to be addressed. After this introduction, the paper covers the safety and operational insights derived from the three seismic-margin reviews already completed: the NRC-sponsored review at Maine Yankee; the EPRI-sponsored review at Catawba; and the joint EPRI/NRC/utility effort at Hatch. The emphasis is on engineering insights, with attention to the aspects of the reviews that are easiest to perform and that provide the most readily available insights

  12. Whipple Resection: Concordance Between Frozen Section And Permanent Section Diagnosis Of Surgical Margins.

    Science.gov (United States)

    Bilal, Muhammad; Tariq, Hina; Mamoon, Nadira

    2018-01-01

    Margin assessment is done in Whipple procedures which are usually performed to resect tumours of head of pancreas and ampullary/periampullary region. Aims and objective of the study are to determine the concordance between frozen sections (FS) and permanent sections (PS) of surgical margins in Whipple resections. It is a retrospective study, from January 2008 to January 2015 (07 years). It includes the specimen with malignancy in final report and for which FS of pancreatic and/or CBD margin(s) were requested. Data was retrieved from Laboratory information system (LIS) database. Of the 41 bile duct margins in cases of ampullary tumours, 03 were positive on FS as well as PS, 35 were negative on FS as well as on PS. Results showed 100% sensitivity, 92.1% specificity, 50% PPV and 100% NPV. Results of 36 pancreatic margins in cases of ampullary showed 100% sensitivity, 97.1% specificity, 50% PPV and 100% NPV. In pancreatic carcinoma cases, none of CBD margins were reported as positive on FS, 02 margins reported as negative were found positive on PS, while 17 were negative on FS as well as PS. Results showed 100% specificity and 89.5% NPV. Of the 27 pancreatic margins tested in pancreatic tumours 100% sensitivity, 94.1% specificity, 88.9% PPV and 100% NPV was found. Factors such as absent prior tissue diagnosis and/or inflammatory processes make margin diagnosis difficult. However, a high concordance was observed between our FS and PS diagnosis.

  13. RISK-INFORMED SAFETY MARGIN CHARACTERIZATION

    International Nuclear Information System (INIS)

    Dinh, Nam; Szilard, Ronaldo

    2009-01-01

    The concept of safety margins has served as a fundamental principle in the design and operation of commercial nuclear power plants (NPPs). Defined as the minimum distance between a system's 'loading' and its 'capacity', plant design and operation is predicated on ensuring an adequate safety margin for safety-significant parameters (e.g., fuel cladding temperature, containment pressure, etc.) is provided over the spectrum of anticipated plant operating, transient and accident conditions. To meet the anticipated challenges associated with extending the operational lifetimes of the current fleet of operating NPPs, the United States Department of Energy (USDOE), the Idaho National Laboratory (INL) and the Electric Power Research Institute (EPRI) have developed a collaboration to conduct coordinated research to identify and address the technological challenges and opportunities that likely would affect the safe and economic operation of the existing NPP fleet over the postulated long-term time horizons. In this paper we describe a framework for developing and implementing a Risk-Informed Safety Margin Characterization (RISMC) approach to evaluate and manage changes in plant safety margins over long time horizons

  14. Marginal value of natural water in agriculture: a study in the suburbs of Mekelle City, Ethiopia

    NARCIS (Netherlands)

    Gezahegn, T.W.; Xueqin Zhu, Xueqin

    2015-01-01

    In areas where markets for natural water are lacking, information on its marginal value can be an important tool for proper pricing to achieve efficient allocation of the resource. This article investigates the marginal value of natural water (rainwater used as a proxy) in agricultural crop

  15. Combined reflectance confocal microscopy-optical coherence tomography for delineation of basal cell carcinoma margins: an ex vivo study

    Science.gov (United States)

    Iftimia, Nicusor; Peterson, Gary; Chang, Ernest W.; Maguluri, Gopi; Fox, William; Rajadhyaksha, Milind

    2016-01-01

    We present a combined reflectance confocal microscopy (RCM) and optical coherence tomography (OCT) approach, integrated within a single optical layout, for diagnosis of basal cell carcinomas (BCCs) and delineation of margins. While RCM imaging detects BCC presence (diagnoses) and its lateral spreading (margins) with measured resolution of ˜1 μm, OCT imaging delineates BCC depth spreading (margins) with resolution of ˜7 μm. When delineating margins in 20 specimens of superficial and nodular BCCs, depth could be reliably determined down to ˜600 μm, and agreement with histology was within about ±50 μm.

  16. Assessment of bioenergy potential on marginal land in China

    Energy Technology Data Exchange (ETDEWEB)

    Zhuang, Dafang; Jiang, Dong; Liu, Lei; Huang, Yaohuan [Data Center for Resources and Environmental Sciences, Institute of Geographical Sciences and Natural Resources Research, Chinese Academy of Sciences, 11A Datun Road, Chaoyang District, Beijing 100101 (China)

    2011-02-15

    Bioenergy developed from energy plants will play a more and more important role in future energy supply. Much attention has been paid to energy plants in recent years. As China has fairly limited cultivated land resources, the bioenergy development may mainly rely on the exploitation of marginal land. This study focused on the assessment of marginal land resources and bio-fuel potential in China using newly acquired data and Geographic Information System (GIS) techniques. A multi-factor analysis method was adopted to identify marginal lands for bioenergy development in China, with data of several main types of energy plants on the eco-environmental requirements and natural habits employed. A combined planting zonation strategy was proposed, which was targeted for five species of energy plants including Helianthus tuberous L., Pistacia chinensis, Jatropha curcas L., Cassava and Vernicia fordii. The results indicated that total area of marginal land exploitable for development of energy plants on a large scale was about 43.75 million ha. If 10% of this marginal land was fully utilized for growing the energy plants, the production of bio-fuel would be 13.39 million tons. (author)

  17. Effect of two prophylaxis methods on marginal gap of Cl Vresin-modified glass-ionomer restorations.

    Science.gov (United States)

    Kimyai, Soodabeh; Pournaghi-Azar, Fatemeh; Daneshpooy, Mehdi; Abed Kahnamoii, Mehdi; Davoodi, Farnaz

    2016-01-01

    Background. This study evaluated the effect of two prophylaxis techniques on the marginal gap of CI V resin-modified glass-ionomer restorations. Methods. Standard Cl V cavities were prepared on the buccal surfaces of 48 sound bovine mandibular incisors in this in vitro study. After restoration of the cavities with GC Fuji II LC resin-modified glass-ionomer, the samples were randomly assigned to 3 groups of 16. In group 1, the prophylactic procedures were carried out with rubber cup and pumice powder and in group 2 with air-powder polishing device (APD). In group 3 (control), the samples did not undergo any prophylactic procedures. Then the marginal gaps were measured. Two-way ANOVA was used to compare marginal gaps at the occlusal and gingival margins between the groups. Post hoc Tukey test was used for two-by-two comparisons. Statistical significance was set at P marginal gaps in terms of prophylactic techniques (P marginal gaps in the APD group compared to the pumice and rubber cup group, which in turn exhibited significantly larger marginal gaps compared to the control group (P marginal gaps were significant in terms of the margin type (P margins compared to the occlusal margins (P marginal gaps of Cl V resin-modified glass-ionomer restorations.

  18. Overview of seismic margin insights gained from seismic PRA results

    International Nuclear Information System (INIS)

    Kennedy, R.P.; Sues, R.H.; Campbell, R.D.

    1986-01-01

    This paper presents the findings of a study conducted under NRC and EPRI sponsorship in which published seismic PRAs were reviewed in order to gain insight to the seismic margins inherent in existing nuclear plants. The approach taken was to examine the fragilities of those components which have been found to be dominant contributors to seismic risk at plants in low-to-moderate seismic regions (SSE levels between 0.12g and 0.25g). It is concluded that there is significant margin inherent in the capacity of most critical components above the plant design basis. For ground motions less than about 0.3g, the predominant sources of seismic risk are loss of offsite power coupled with random failure of the emergency diesels, non-recoverable circuit breaker trip due to relay chatter, unanchored equipment, unreinforced non-load bearing block walls, vertical water storage tanks, systems interactions and possibly soil liquefaction. Recommendations as to which components should be reviewed in seismic margin studies for margin earthquakes less than 0.3g, between 0.3g and 0.5g, and greater than 0.5g, developed by the NRC expert panel on the quantification of seismic margins (based on the review of past PRA data, earthquake experience data, and their own personal experience) are presented

  19. A quantitative analysis of transtensional margin width

    Science.gov (United States)

    Jeanniot, Ludovic; Buiter, Susanne J. H.

    2018-06-01

    Continental rifted margins show variations between a few hundred to almost a thousand kilometres in their conjugated widths from the relatively undisturbed continent to the oceanic crust. Analogue and numerical modelling results suggest that the conjugated width of rifted margins may have a relationship to their obliquity of divergence, with narrower margins occurring for higher obliquity. We here test this prediction by analysing the obliquity and rift width for 26 segments of transtensional conjugate rifted margins in the Atlantic and Indian Oceans. We use the plate reconstruction software GPlates (http://www.gplates.org) for different plate rotation models to estimate the direction and magnitude of rifting from the initial phases of continental rifting until breakup. Our rift width corresponds to the distance between the onshore maximum topography and the last identified continental crust. We find a weak positive correlation between the obliquity of rifting and rift width. Highly oblique margins are narrower than orthogonal margins, as expected from analogue and numerical models. We find no relationships between rift obliquities and rift duration nor the presence or absence of Large Igneous Provinces (LIPs).

  20. Excessive price reduction and extreme volatility in wind dominant electricity markets; solutions and emerging challenges

    DEFF Research Database (Denmark)

    Farashbashi-Astaneh, Seyed-Mostafa; Chen, Zhe; Mousavi, Omid Alizadeh

    2013-01-01

    High intermittency in the nature of wind power emphasize conceptual revising in the mechanisms of electricity markets with high wind power penetration levels. This paper introduces overmuch price reduction and high price volatility as two adverse consequences in future wind dominant electricity...... is developed. The paper indicates discriminatory pricing approach can be beneficial in high penetration of wind power because it alleviates high price variations and spikiness in one hand and prevents overmuch price reduction in wind dominant electricity markets on the other hand....... markets. While high price volatility imposes elevated risk levels for both electricity suppliers and consumers, excessive price reduction of electricity is a disincentive for investment in new generation capacity and might jeopardizes system adequacy in long term. A comparative study between marginal...

  1. Convergent adaptive evolution in marginal environments: unloading transposable elements as a common strategy among mangrove genomes.

    Science.gov (United States)

    Lyu, Haomin; He, Ziwen; Wu, Chung-I; Shi, Suhua

    2018-01-01

    Several clades of mangrove trees independently invade the interface between land and sea at the margin of woody plant distribution. As phenotypic convergence among mangroves is common, the possibility of convergent adaptation in their genomes is quite intriguing. To study this molecular convergence, we sequenced multiple mangrove genomes. In this study, we focused on the evolution of transposable elements (TEs) in relation to the genome size evolution. TEs, generally considered genomic parasites, are the most common components of woody plant genomes. Analyzing the long terminal repeat-retrotransposon (LTR-RT) type of TE, we estimated their death rates by counting solo-LTRs and truncated elements. We found that all lineages of mangroves massively and convergently reduce TE loads in comparison to their nonmangrove relatives; as a consequence, genome size reduction happens independently in all six mangrove lineages; TE load reduction in mangroves can be attributed to the paucity of young elements; the rarity of young LTR-RTs is a consequence of fewer births rather than access death. In conclusion, mangrove genomes employ a convergent strategy of TE load reduction by suppressing element origination in their independent adaptation to a new environment. © 2017 The Authors. New Phytologist © 2017 New Phytologist Trust.

  2. Systems considerations in seismic margin evaluations

    International Nuclear Information System (INIS)

    Buttermer, D.R.

    1987-01-01

    Increasing knowledge in the geoscience field has led to the understanding that, although highly unlikely, it is possible for a nuclear power plant to be subjected to earthquake ground motion greater than that for which the plant was designed. While it is recognized that there are conservatisms inherent in current design practices, interest has developed in evaluating the seismic risk of operating plants. Several plant-specific seismic probabilistic risk assessments (SPRA) have been completed to address questions related to the seismic risk of a plant. The results from such SPRAs are quite informative, but such studies may entail a considerable amount of expensive analysis of large portions of the plant. As an alternative to an SPRA, it may be more practical to select an earthquake level above the design basis for which plant survivability is to be demonstrated. The principal question to be addressed in a seismic margin evaluation is: At what ground motion levels does one have a high confidence that the probability of seismically induced core damage is sufficiently low? In a seismic margin evaluation, an earthquake level is selected (based on site-specific geoscience considerations) for which a stable, long-term safe shutdown condition is to be demonstrated. This prespecified earthquake level is commonly referred to as the seismic margin earthquake (SME). The Electric Power Research Institute is currently supporting a research project to develop procedures for use by the utilities to allow them to perform nuclear plant seismic margin evaluations. This paper describes the systems-related aspects of these procedures

  3. Phenomenon of Women Marginalization in Poor Family in Pakpak Community (A Case Study in Pegagan Julu Village, Sumbul Subdistrict, Dairi Regency - North Sumatra - Indonesia

    Directory of Open Access Journals (Sweden)

    Hadriana Marhaeni Munthe

    2017-06-01

    Full Text Available This article is taken from the study of marginalization cases experienced by Pakpak women of rural poor families. The study was conducted in Pegagan village of Sumbul Subdistrict, Dairi, North Sumatra province. The marginalization phenomenon is shown in some aspects; restrictions on women's access to formal education, tendency of dropping out of school, having no inheritance rights and no role in the decision making of custom. Related to this phenomenon, the research question of this study is how the process of marginalization experienced by women in their family is.Marxist structural feminist perspective and qualitative approach with feminist perspective were used to answer the research question. The findings of the study finally show that the structured patriarchy ideology as gender ideology in family becomes the cause of women marginalization. Patriarchy becoming gender ideological construction in Pakpak family is interpreted and expressed in the form of private patriarchy, that is a hegemonizing system or structure of men power that has dominated and subordinated social position of women in Pakpak families.

  4. Marginality and Social Rejection in Amiri Baraka's Slave Ship

    Directory of Open Access Journals (Sweden)

    Hamid Hammad Abed

    2016-11-01

    Full Text Available Marginality and social rejection are the most influential matters exploited by Baraka to intentionally criticize the American society.  More often than not, these two matters have become the scenes of major or minor acts of humiliation and dehumanization that threaten to violate the ethical rules of living. This paper aims at investigating the impact of marginality and social rejection on a number of black characters in Baraka's Slave Ship who are brought to America to be sold as commodities. It is divided into two sections and conclusion. Section one deals with Amiri Baraka’s dramatic thought and experience of marginality within the American society. The textual analysis of Slave Ship is investigated in section two. The significance of the study lies in its textual exploration of the impact of marginality and social rejection in subverting the American dream of democracy, freedom, and equality in Baraka’s Slave Ship.

  5. On the evaluation of marginal expected shortfall

    DEFF Research Database (Denmark)

    Caporin, Massimiliano; Santucci de Magistris, Paolo

    2012-01-01

    In the analysis of systemic risk, Marginal Expected Shortfall may be considered to evaluate the marginal impact of a single stock on the market Expected Shortfall. These quantities are generally computed using log-returns, in particular when there is also a focus on returns conditional distribution....... In this case, the market log-return is only approximately equal to the weighed sum of equities log-returns. We show that the approximation error is large during turbulent market phases, with a subsequent impact on Marginal Expected Shortfall. We then suggest how to improve the evaluation of Marginal Expected...

  6. [Study on the effect of different impression methods on the marginal fit of all-ceramic crowns].

    Science.gov (United States)

    Zhan, Lilin; Zeng, Liwei; Chen, Ping; Liao, Lan; Li, Shiyue; Liu, Renying

    2015-08-01

    To investigate the effect of three different impression methods on the marginal fit of all-ceramic crowns. The three methods include scanning silicone rubber impression, cast models, and direct optical impression. The polymethyl methacrylate (PMMA) material of a mandibular first molar in standard model was prepared with 16 models duplicated. The all-ceramic crowns were prepared using three different impression methods. Accurate impressions were made using silicone rubber, and the cast models were obtained. The PMMA models, silicone rubber impressions, and cast models were scanned, and digital models of three groups were obtained to produce 48 zirconia all-ceramic crowns with computer aided design/computer aided manufacture. The marginal fit of these groups was measured by silicone rubber gap impression. Statistical analysis was performed with SPSS 17.0 software. The marginal fit of direct optical impression groups, silicone rubber impression groups, cast model groups was (69.18±9.47), (81.04±10.88), (84.42±9.96) µm. A significant difference was observed in the marginal fit of the direct optical impression groups and the other groups (Pimpression groups and the cast model groups (P>0.05). All marginal measurement sites are clinically acceptable by the three different impression scanning methods. The silicone rubber impression scanning method can be used for all-ceramic restorations.

  7. Limitations of ''margin'' in qualification tests

    International Nuclear Information System (INIS)

    Clough, R.L.; Gillen, K.T.

    1984-01-01

    We have carried out investigations of polymer radiation degradation behaviors which have brought to light a number of reasons why this concept of margin can break down. First of all, we have found that dose-rate effects vary greatly in magnitude. Thus, based on high dose-rate testing, poor materials with large dose-rate effects may be selected over better materials with small effects. Also, in certain cases, material properties have been found to level out (as with PVC) or reverse trend (as with buna-n) at high doses, so that ''margin'' may be ineffective, misleading, or counterproductive. For Viton, the material properties were found to change in opposite directions at high and low dose rates, making ''margin'' inappropriate. The underlying problem with the concept of ''margin'' is that differences in aging conditions can lead to fundamental differences in degradation mechanisms

  8. Marginal mandibular branch of the facial nerve: An anatomical study

    Directory of Open Access Journals (Sweden)

    Ayman Ahmad Khanfour

    2014-06-01

    Results: Results showed that the (MMBFN arises as a single branch, two branches, and three branches in 36.7%, 43.3% and 20% of specimens, respectively. In 83.3% of cases, one of the main or secondary branches of the marginal mandibular nerve crosses superficial (lateral to the facial vessels. There are communications either between the main or the secondary branches of the marginal mandibular nerve itself in 53.6% of specimens and with the buccal branch of the facial nerve in 40%, also with the anterior branch of the great auricular nerve in 3.3%, and with the transverse cervical nerve in 3.3% of specimens. The relationship of the nerve to the lower border of the mandible at a point midway between the angle of the mandible and symphysis menti is variable; it is either totally above it in most of the specimens 80%, or below it in 10% or at it in the remaining 10% of the specimens. The branches that lie above the lower border of the mandible are always deep into the superficial layer of the parotid fascia, while those branches that lie below the lower border of the mandible are intrafascially. The termination of the nerve is deep into the muscles of the ipsilateral lower lip in all specimens.

  9. The stability margin of elongated plasmas

    International Nuclear Information System (INIS)

    Portone, Alfredo

    2005-01-01

    Passive stabilization is a key feature in tokamak design since it indicates the efficiency of the metallic structures to 'oppose' plasma displacements. As far as plasma vertical displacement modes are concerned, usually their passive stabilization is characterized in terms of two main indices, namely the instability growth time and the stability margin. In this study-after recalling the governing equations-we extend the definition of the stability margin given in the literature (Lazarus E. et al 1990 Nucl. Fusion 30 111, Albanese R. et al 1990 IEEE Trans. Magn. 26, Kameari A. et al 1985 Nucl. Eng. Des./Fusion 365-73) for the rigid body displacement model to the non-rigid plasma model. Numerical examples are also given for the reduced task objectives/reduced cost ITER design

  10. Export Margins, Price and Quantity of Belarus’s Export Growth

    Directory of Open Access Journals (Sweden)

    Otamurodov Shavkat

    2017-03-01

    Full Text Available This paper examines the sources of Belarus’s export growth and decomposes export growth into extensive and intensive margins. This study also aims to determine export margins for intermediate and final goods and to determine the price and quantity components of the intensive export margin. In order to achieve the desired objectives, we use two methods for decomposing export growth, the count method and the export shares method. We analyse Belarus's export growth using export data at the HS-6 digit level for the 2004-2014 period. Our results show that Belarus's exports grew mainly due to growth in the price margin during the studied period 2004-2014. However, the extensive margin was important in export growth to some extent. Comparing the growth rate across final and intermediate goods reveals that although the share of final products in Belarus’s exports is not very big (18.9% in 2014, the average annual growth in exports of final products is higher than that of intermediate goods. Our investigation also shows that Belarus produces a wide range of commodities, but the share of the most of these commodities is not large; its exports depend on a restricted range of commodities. Moreover, most of the commodities are exported to Russia and Ukraine. Our results give us reason to assume that finding new markets for their new products is one of the main challenges for developing countries wishing to increase their exports by an extensive margin. This has important implications for how policy makers promote the trade and diversification of exports.

  11. Silenced, Silence, Silent: Motherhood in the Margins

    Science.gov (United States)

    Carpenter, Lorelei; Austin, Helena

    2007-01-01

    This project explores the experiences of women who mother children with ADHD. The authors use the metaphor of the text and the margin. The text is the "motherhood myth" that describes a particular sort of "good" mothering. The margin is the space beyond that text. This marginal space is inhabited by some or all of the mothers they spoke with, some…

  12. Marginal Accuracy of Castings Fabricated with Ringless Casting Investment System and Metal Ring Casting Investment System: A Comparative Study.

    Science.gov (United States)

    Kalavathi, M; Sachin, Bhuvana; Prasanna, B G; Shreeharsha, T V; Praveen, B; Ragher, Mallikarjuna

    2016-02-01

    The thermal expansion of the investment can be restricted by the metal casting ring because the thermal expansion of the ring is less than that of the investment. The ringless casting procedure is in use in clinical dentistry, though there is little scientific data to support its use in fixed partial dentures. In this study, marginal discrepancy of castings produced with the ringless casting technique and the conventional technique using the metal rings were compared. A total of 30 wax patterns were fabricated directly on a metal die. Optical stereomicroscope was used to measure the marginal discrepancy between the metal die and wax patterns. A total of 15 castings were invested using Bellavest T phosphate-bonded investment with the ringless technique and 15 were invested with the same investment with a metal ring; 30 castings were produced using a nickel-chromium ceramo-metal alloy. The internal surface of the castings was not modified and seated with finger pressure. The vertical marginal discrepancy was measured using an optical stereomicroscope at a magnification of 100x. The data obtained were statistically analyzed using students t-test (paired t-test and unpaired t-test). The castings of the ringless technique provided less vertical marginal discrepancy (240.56 ± 45.81 μ) than the castings produced with the conventional metal ring technique (281.98± 53.05 μ). The difference was statistically significant. The ringless casting technique had produced better marginal accuracy compared with conventional casting technique. Ringless casting system can be used routinely for clinical purpose.

  13. Double Marginalized Livelihoods: Invisible Gender Inequality in Pastoral Societies

    Directory of Open Access Journals (Sweden)

    Sileshi Mengistu

    2013-02-01

    Full Text Available Achieving gender equality is the Third Millennium Development Goal, and the major challenge to poverty reduction is the inability of governments to address this at grass root levels. This study is therefore aimed at assessing gender inequality as it pertains to socio-economic factors in (agro- pastoral societies. It tries to explain how “invisible” forces perpetuate gender inequality, based on data collected from male and female household heads and community representatives. The findings indicate that in comparison with men, women lack access to control rights over livestock, land, and income, which are critical to securing a sustainable livelihood. However, this inequality remains invisible to women who appear to readily submit to local customs, and to the community at large due to a lack of public awareness and gender based interventions. In addition, violence against women is perpetuated through traditional beliefs and sustained by tourists to the area. As a result, (agro- pastoral woman face double marginalization, for being pastoralist, and for being a woman.

  14. Seismic margin analysis for Kashiwazaki Kariwa ABWR plant considering the Niigataken Chuetsu-oki earthquake

    International Nuclear Information System (INIS)

    Matsuo, Toshihiro; Nagasawa, Kazuyuki; Kawamura, Shinichi; Ueki, Takashi; Higuchi, Tomokazu; Sakaki, Isao

    2009-01-01

    Seismic Margin Analysis (SMA) study was conducted for Kashiwazaki Kariwa (KK) ABWR representative plant (unit 6). Considering that the installation behaved in a safe manner during and after the Niigataken Chuetsu-oki (NCO) Earthquake which significantly exceeded the level of the seismic input taken into account in the design of the plant, the study to find out how much margin the ABWR plant had toward the same seismic motion was conducted. In this study fragility analyses were conducted for SSCs that were included in the accident sequences and that were considered to have relatively small margin taking EPRI margin analysis method into consideration. In order to calculate plant level seismic margin Min-Max method was adopted. As the result of this study, the plant level High Confidence Low Probability of Failure (HCLPF) acceleration for unit 6 was calculated more than tripled NCO earthquake motion. (author)

  15. Aspects of marginal expenditures in energy sector

    International Nuclear Information System (INIS)

    Stojchev, D.; Kynev, K.

    1994-01-01

    Technical and economical problems of marginal analysis methodology, its application procedure in energy sector and marginal expenditures determination are outlined. A comparative characteristics of the application is made for different periods of time. The differences in calculation of the marginal expenditures and prices are discussed. The operational costs, investments and inflation are analyzed. The mechanism of application of this approach in different planing horizon is outlined. The role of the change in the costs in time, the time unit, volume, the scope of application, etc. are determined. The areas of transition from one to other form of marginal expenditures are shown. 4 refs. (orig.)

  16. Assessing the effectiveness of voluntary solid waste reduction policies: Methodology and a Flemish case study

    International Nuclear Information System (INIS)

    Jaeger, Simon de; Eyckmans, Johan

    2008-01-01

    The purpose of this paper is to illustrate the use of statistical techniques to evaluate the effectiveness of voluntary policy instruments for waste management. The voluntary character of these instruments implies that latent characteristics, unobserved by the analyst, might influence the subscription decision and might lead to biased estimates of the effectiveness of the policy instrument if standard techniques are used. We propose an extension of the difference-in-differences (DiD) estimator to evaluate the effectiveness of voluntary policy instruments, which is termed the dynamic difference-in-differences (or DDD) estimator. We illustrate the technique by estimating the effectiveness of voluntary cooperation agreements between the Flemish environmental administration and individual municipalities aimed at curbing residential solid waste. Using a dataset covering all 308 Flemish municipalities for the period 2000-2005, our results indicate that municipalities subscribing to the agreement accomplished less reduction of their waste levels compared to what could be expected on the basis of their own performance prior to subscription and the performance of the non-subscribers. This result might be explained by the rising marginal cost of extra residential solid waste reduction policies. In addition, there are indications that subscribing municipalities refrain from additional reduction efforts once the target waste level of the program is achieved. The more complicated DDD methodology is shown to generate additional insight over the ordinary DiD analysis

  17. Characterizing entanglement with global and marginal entropic measures

    International Nuclear Information System (INIS)

    Adesso, Gerardo; Illuminati, Fabrizio; De Siena, Silvio

    2003-01-01

    We qualify the entanglement of arbitrary mixed states of bipartite quantum systems by comparing global and marginal mixednesses quantified by different entropic measures. For systems of two qubits we discriminate the class of maximally entangled states with fixed marginal mixednesses, and determine an analytical upper bound relating the entanglement of formation to the marginal linear entropies. This result partially generalizes to mixed states the quantification of entanglement with marginal mixednesses holding for pure states. We identify a class of entangled states that, for fixed marginals, are globally more mixed than product states when measured by the linear entropy. Such states cannot be discriminated by the majorization criterion

  18. Steel Industry Marginal Opportunity Analysis

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2005-09-01

    The Steel Industry Marginal Opportunity Analysis (PDF 347 KB) identifies opportunities for developing advanced technologies and estimates both the necessary funding and the potential payoff. This analysis determines what portion of the energy bandwidth can be captured through the adoption of state-of-the-art technology and practices. R&D opportunities for addressing the remainder of the bandwidth are characterized and plotted on a marginal opportunity curve.

  19. MARGINALIZATION OF PARWA LEATHER PUPPET IN GIANYAR REGENCY IN GLOBALIZATION ERA

    Directory of Open Access Journals (Sweden)

    I Made Yudabakti

    2013-12-01

    Full Text Available This present study discussed the marginalization of the Parwa Leather Puppet in Gianyar Regency in the globalization era. It discussed the form, the causing factors, and the impact of marginalization. The qualitative interpretative method was used to analyze the problems of the study. The data were collected using the techniques of observation, in-depth interview, documentary study, and library research. The data were qualitatively analyzed. The results of the study showed that there were several forms of marginalization occurring to the Parwa Leather Puppet ‘Wayang Kulit Parwa’ (WKP in Gianyar Regency. This was indicated by the change in the context of performance and indication of marginalization. The forms of the context of performance were made up of the facts that (a the viewers shifted from the young generation to the old generation; (b it used to be performed as an offering but now it was performed as a commodity or comodification; (c technology played more important roles (the lighting, sound system, and the material for making the puppet, and d the accompanying gamelan orchestra changed. Marginalization was indicated by (a the fall in the frequency of performance, (b WKP was getting less popular in the community; (c fewer people were getting interested in WKP performance; and (e WKP was getting less respected. The factors responsible for the marginalization of WKP in Gianyar Regency were the facts that less people were interested in WKP, the decrease in the WKP puppeteer’s activities, the policy issued by the traditional institution was weak, and the supervision made by the local government of Gianyar was weak. In addition, WKP was less prospective; the current community needed more amusement than guidance, the rise in the impact of foreign cultural art, more and more sources of modern amusements were made available, and the impact of telecommunication technology. The marginalization of WKP in Gianyar Regency led to impacts and

  20. Steep microbial boundstone-dominated plaform margins

    NARCIS (Netherlands)

    Kenter, J.A.M.; Harris, P.M.; Della Porta, G.P.

    2005-01-01

    Seaward progradation of several kilometers has been documented mostly for leeward margin low-angle carbonate slope systems with a dominant platform top sediment source. However, steep and high-relief margins fronting deep basins can also prograde and as such are somewhat perplexing. Characteristics

  1. The impact of power market reforms on electricity price-cost margins and cross-subsidy levels: A cross country panel data analysis

    International Nuclear Information System (INIS)

    Erdogdu, Erkan

    2011-01-01

    One of the main expectations from power market reform has been a reduction in both price-cost margins and cross-subsidy levels between industrial and residential consumers. This paper focuses on this issue by looking at the impact of the electricity industry reforms on residential and industrial electricity price-cost margins and their effect on cross-subsidy levels between consumer groups. Using panel data for 63 developed and developing countries covering the period 1982-2009, empirical models are developed and analyzed. The research findings suggest that there is no uniform pattern for the impact of reform process as a whole on price-cost margins and cross-subsidy levels. Each individual reform step has different impact on price-cost margins and cross-subsidy levels for each consumer and country group. Our findings imply that reform steps have different impacts in different countries, which supports the idea reform prescription for a specific country cannot easily and successfully be transferred to another one. So, transferring the formal and economic structure of a successful power market in a developed country to developing countries is not a sufficient condition for good economic performance of the electricity industries in developing countries. Furthermore, the study suggests that power consumption, income level and country-specific features constitute other important determinants of electricity price-cost margins and cross-subsidy levels. - Research highlights: → The paper focuses on the impact of power market reforms on price-cost margins and cross-subsidy levels. → Using panel data for 63 countries for the period 1982-2009, empirical models are developed and analyzed. → We found that each individual reform step has different impact for each consumer and country group. → We conclude that reform prescription for a specific country cannot easily be transferred to another one.

  2. Advancing Understanding of Earthquakes by Drilling an Eroding Convergent Margin

    Science.gov (United States)

    von Huene, R.; Vannucchi, P.; Ranero, C. R.

    2010-12-01

    A program of IODP with great societal relevance is sampling and instrumenting the seismogenic zone. The zone generates great earthquakes that trigger tsunamis, and submarine slides thereby endangering coastal communities containing over sixty percent of the earth’s population. To asses and mitigate this endangerment it is urgent to advance understanding of fault dynamics that allows more timely anticipation of hazardous seismicity. Seismogenesis on accreting and eroding convergent plate boundaries apparently differ because of dissimilar materials along the interplate fault. As the history of instrumentally recorded earthquakes expands the difference becomes clearer. The more homogeneous clay, silt and sand subducted at accreting margins is associated with great earthquakes (M 9) whereas the fragmented upper plate rock that can dominate subducted material along an eroding margin plate interface is associated with many tsunamigenic earthquakes (Bilek, 2010). Few areas have been identified where the seismogenic zone can be reached with scientific drilling. In IODP accreting margins are studied on the NanTroSeize drill transect off Japan where the ultimate drilling of the seismogenic interface may occur by the end of IODP. The eroding Costa Rica margin will be studied in CRISP where a drill program will begin in 2011. The Costa Rican geophysical site survey will be complete with acquisition and processing of 3D seismic data in 2011 but the entire drilling will not be accomplished in IODP. It is appropriate that the accreting margin study be accomplished soon considering the indications of a pending great earthquake that will affect a country that has devoted enormous resources to IODP. However, understanding the erosional end-member is scientifically as important to an understanding of fault mechanics. Transoceanic tsunamis affect the entire Pacific rim where most subduction zones are eroding margins. The Costa Rican subduction zone is less complex operationally and

  3. Marginalized Youth. An Introduction.

    OpenAIRE

    Kessl, Fabian; Otto, Hans-Uwe

    2009-01-01

    The life conduct of marginalized groups has become subject to increasing levels of risk in advanced capitalist societies. In particular, children and young people are confronted with the harsh consequences of a “new poverty” in the contemporary era. The demographic complexion of today’s poverty is youthful, as a number of government reports have once again documented in recent years in Australia, Germany, France, Great Britain, the US or Scandinavian countries. Key youth studies have shown a ...

  4. Evaluation of marginal fit of two all-ceramic copings with two finish lines

    Science.gov (United States)

    Subasi, Gulce; Ozturk, Nilgun; Inan, Ozgur; Bozogullari, Nalan

    2012-01-01

    Objectives: This in-vitro study investigated the marginal fit of two all-ceramic copings with 2 finish line designs. Methods: Forty machined stainless steel molar die models with two different margin designs (chamfer and rounded shoulder) were prepared. A total of 40 standardized copings were fabricated and divided into 4 groups (n=10 for each finish line-coping material). Coping materials tested were IPS e.max Press and Zirkonzahn; luting agent was Variolink II. Marginal fit was evaluated after cementation with a stereomicroscope (Leica MZ16). Two-way analysis of variance and Tukey-HSD test were performed to assess the influence of each finish line design and ceramic type on the marginal fit of 2 all-ceramic copings (α =.05). Results: Two-way analysis of variance revealed no statistically significant differences for marginal fit relative to finish lines (P=.362) and ceramic types (P=.065). Conclusion: Within the limitations of this study, both types of all-ceramic copings demonstrated that the mean marginal fit was considered acceptable for clinical application (⩽120 μm). PMID:22509119

  5. Recognizing nodal marginal zone lymphoma: recent advances and pitfalls. A systematic review

    Science.gov (United States)

    van den Brand, Michiel; van Krieken, J. Han J.M.

    2013-01-01

    The diagnosis of nodal marginal zone lymphoma is one of the remaining problem areas in hematopathology. Because no established positive markers exist for this lymphoma, it is frequently a diagnosis of exclusion, making distinction from other low-grade B-cell lymphomas difficult or even impossible. This systematic review summarizes and discusses the current knowledge on nodal marginal zone lymphoma, including clinical features, epidemiology and etiology, histology, and cytogenetic and molecular features. In particular, recent advances in diagnostics and pathogenesis are discussed. New immunohistochemical markers have become available that could be used as positive markers for nodal marginal zone lymphoma. These markers could be used to ensure more homogeneous study groups in future research. Also, recent gene expression studies and studies describing specific gene mutations have provided clues to the pathogenesis of nodal marginal zone lymphoma, suggesting deregulation of the nuclear factor kappa B pathway. Nevertheless, nodal marginal zone lymphoma remains an enigmatic entity, requiring further study to define its pathogenesis to allow an accurate diagnosis and tailored treatment. However, recent data indicate that it is not related to splenic or extranodal lymphoma, and that it is also not related to lymphoplasmacytic lymphoma. Thus, even though the diagnosis is not always easy, it is clearly a separate entity. PMID:23813646

  6. Conference Report: The New Discovery of Margins: Theory-Based Excursions in Marginal Social Fields

    OpenAIRE

    Kirchner, Babette; Lorenzen, Jule-Marie; Striffler, Christine

    2014-01-01

    At this year's spring conference of the Sociology of Knowledge Section of the German Sociological Association, a diverse range of theoretical concepts and multiple empirical insights into different marginal social fields were presented. As in everyday life, drawing a line between center and margin can be seen as an important challenge that must equally be faced in sociology. The socially constructed borderline appears to be highly variable. Therefore it has to be delineated or fixed somehow. ...

  7. On the marginally relevant operator in z=2 Lifshitz holography

    International Nuclear Information System (INIS)

    Holsheimer, Kristian

    2014-01-01

    We study holographic renormalization and RG flow in a strongly-coupled Lifshitz-type theory in 2+1 dimensions with dynamical exponent z=2. The bottom-up gravity dual we use is 3+1 dimensional Einstein gravity coupled to a massive vector field. This model contains a marginally relevant operator around the Lifshitz fixed point. We show how holographic renormalization works in the presence of this marginally relevant operator without the need to introduce explicitly cutoff-dependent counterterms. A simple closed-form expression is found for the renormalized on-shell action. We also discuss how asymptotically Lifshitz geometries flow to AdS in the interior due to the marginally relevant operator. We study the behavior of the renormalized entanglement entropy and confirm that it decreases monotonically along the Lifshitz-to-AdS RG flow

  8. Flood Disaster Risk Reduction in municipality-scale in Rio de Janeiro State

    Science.gov (United States)

    Japiassú Viana, Viviane; Formiga Johnsson, Rosa Maria; De Gouvello, Bernard

    2015-04-01

    In Brazil, flood disasters causing human damage, pecuniary loss and environmental damage, are mainly due to greater exposure of the population; urban densification on the riverbanks and margins, incurring vulnerability due to changes in river level and climate changes. This article presents the data and studies required in the Brazilian legal basis and analyzes the scales adopted by planners in contrast to the scales demands by the executing agencies in the context of prevention and adaptation to climate change, particularly to flood disaster reduction in municipality-scale.

  9. Stability of marginally outer trapped surfaces and symmetries

    Energy Technology Data Exchange (ETDEWEB)

    Carrasco, Alberto; Mars, Marc, E-mail: acf@usal.e, E-mail: marc@usal.e [Facultad de Ciencias, Universidad de Salamanca, Plaza de la Merced s/n, 37008 Salamanca (Spain)

    2009-09-07

    We study the properties of stable, strictly stable and locally outermost marginally outer trapped surfaces in spacelike hypersurfaces of spacetimes possessing certain symmetries such as isometries, homotheties and conformal Killings. We first obtain results for general diffeomorphisms in terms of the so-called metric deformation tensor and then particularize to different types of symmetries. In particular, we find restrictions at the surfaces on the vector field generating the symmetry. Some consequences are discussed. As an application, we present a result on non-existence of stable marginally outer trapped surfaces in slices of FLRW.

  10. Optimizing Collimator Margins for Isotoxically Dose-Escalated Conformal Radiation Therapy of Non-Small Cell Lung Cancer

    Energy Technology Data Exchange (ETDEWEB)

    Warren, Samantha, E-mail: Samantha.warren@oncology.ox.ac.uk [Department of Oncology, Gray Institute of Radiation Oncology and Biology, University of Oxford, Oxford (United Kingdom); Oxford Cancer Centre, Oxford University Hospitals, Oxford (United Kingdom); Panettieri, Vanessa [William Buckland Radiotherapy Centre, Alfred Hospital, Commercial Road, Melbourne (Australia); Panakis, Niki; Bates, Nicholas [Oxford Cancer Centre, Oxford University Hospitals, Oxford (United Kingdom); Lester, Jason F. [Velindre Cancer Centre, Velindre Road, Whitchurch, Cardiff (United Kingdom); Jain, Pooja [Clatterbridge Cancer Centre, Clatterbridge Road, Wirral (United Kingdom); Landau, David B. [Department of Radiotherapy, Guy' s and St. Thomas' NHS Foundation Trust, London (United Kingdom); Nahum, Alan E.; Mayles, W. Philip M. [Clatterbridge Cancer Centre, Clatterbridge Road, Wirral (United Kingdom); Fenwick, John D. [Department of Oncology, Gray Institute of Radiation Oncology and Biology, University of Oxford, Oxford (United Kingdom); Oxford Cancer Centre, Oxford University Hospitals, Oxford (United Kingdom)

    2014-04-01

    Purpose: Isotoxic dose escalation schedules such as IDEAL-CRT [isotoxic dose escalation and acceleration in lung cancer chemoradiation therapy] (ISRCTN12155469) individualize doses prescribed to lung tumors, generating a fixed modeled risk of radiation pneumonitis. Because the beam penumbra is broadened in lung, the choice of collimator margin is an important element of the optimization of isotoxic conformal radiation therapy for lung cancer. Methods and Materials: Twelve patients with stage I-III non-small cell lung cancer (NSCLC) were replanned retrospectively using a range of collimator margins. For each plan, the prescribed dose was calculated according to the IDEAL-CRT isotoxic prescription method, and the absolute dose (D{sub 99}) delivered to 99% of the planning target volume (PTV) was determined. Results: Reducing the multileaf collimator margin from the widely used 7 mm to a value of 2 mm produced gains of 2.1 to 15.6 Gy in absolute PTV D{sub 99}, with a mean gain ± 1 standard error of the mean of 6.2 ± 1.1 Gy (2-sided P<.001). Conclusions: For NSCLC patients treated with conformal radiation therapy and an isotoxic dose prescription, absolute doses in the PTV may be increased by using smaller collimator margins, reductions in relative coverage being offset by increases in prescribed dose.

  11. Contributions to knowledge of the continental margin of Uruguay. Description of background samples in the continental margin of Uruguay

    International Nuclear Information System (INIS)

    Preciozzi, F

    2015-01-01

    This study provide data concerning of the background sediments of the continental margin of Uruguay. There were carried out different works with witnesses in order to extract various sediment samples from the continental shelf

  12. From Borders to Margins

    DEFF Research Database (Denmark)

    Parker, Noel

    2009-01-01

    of entities that are ever open to identity shifts.  The concept of the margin possesses a much wider reach than borders, and focuses continual attention on the meetings and interactions between a range of indeterminate entities whose interactions may determine both themselves and the types of entity...... upon Deleuze's philosophy to set out an ontology in which the continual reformulation of entities in play in ‘post-international' society can be grasped.  This entails a strategic shift from speaking about the ‘borders' between sovereign states to referring instead to the ‘margins' between a plethora...

  13. A pilot study of the marginal adaptation and surface morphology of glass-cermet cements.

    Science.gov (United States)

    Chu, C H; King, N M; Lee, A M; Yiu, C K; Wei, S H

    1996-07-01

    This study investigated changes in the marginal adaptation and surface morphology of Ketac-Silver and Chelon-Silver glass-current cements over time. Dispersalloy amalgam was used as a control. Contralateral pairs of carious primary molars were restored with the test materials and amalgam. Clinical evaluations were scheduled at 12, 18, and 24 months after placement. Gold-plated replicas of the restorations were observed with scanning electron microscopy. Fractures and cracks in the surface of the Dispersalloy and Chelon-Silver increased the surface roughness; however, the damage was superficial and self-limiting in the Dispersalloy restorations, while in Chelon-Silver the fractures caused the material to break down in layers. A substantial quantity of pores, usually smaller than 50 microns in diameter, were observed throughout the surface of the Chelon-Silver restorations. The pores in the surface of Ketac-Silver were fewer and smaller. The incidence of cavomarginal breakdown increased with time. Chelon-Silver restorations had a higher rate of cavomarginal breakdown than did Ketac-Silver and Dispersalloy restorations up to 18 months. However, there was no statistically significant difference in the marginal adaptation of the three groups at 24 months.

  14. Marginal and Interaction Effects in Ordered Response Models

    OpenAIRE

    Debdulal Mallick

    2009-01-01

    In discrete choice models the marginal effect of a variable of interest that is interacted with another variable differs from the marginal effect of a variable that is not interacted with any variable. The magnitude of the interaction effect is also not equal to the marginal effect of the interaction term. I present consistent estimators of both marginal and interaction effects in ordered response models. This procedure is general and can easily be extended to other discrete choice models. I ...

  15. Pilot study of intraoperative digital imaging with the use of a mammograph for assessment of bone surgical margins in the head and neck region

    International Nuclear Information System (INIS)

    Ntomouchtsis, A.; Xinou, K.; Patrikidou, A.; Paraskevopoulos, K.; Kechagias, N.; Tsekos, A.; Balis, G.C.; Gerasimidou, D.; Thuau, H.; Mangoudi, D.; Vahtsevanos, K.

    2013-01-01

    Aim: To investigate alternative possibilities for the intraoperative evaluation of surgical margins after bone resection utilizing more conventional hospital infrastructure technologies. Materials and methods: A small pilot study was performed using digital mammograph imaging intraoperatively on 16 surgical specimens of bone tumours or malignancies with bone infiltration of the head and neck area, with the aim of evaluating the resection margins. Results: In thirteen cases the intraoperative specimen images indicated clinically complete excision. In two cases incomplete resection or close proximity of margins was detected, which required additional resection. Conclusions: The results indicated that intraoperative specimen radiography can prove useful in evaluating completeness of excision. The significance of intraoperative assessment of surgical margin is of paramount importance when immediate reconstruction is performed. This proposed method is cheap, easy to perform and fast. Its cost–benefit ratio is superior than that of any other available technique. Intraoperative analysis of specimens with digital mammography imaging can potentially become a useful tool for immediate evaluation of osseous margins after resection

  16. Fairness and cost-effectiveness of CO2 emission reduction targets in the European Union member states. An analysis based on scenario studies

    International Nuclear Information System (INIS)

    Kram, T.; Ybema, J.R.; Vos, D.

    1997-06-01

    The Member States of the European Union (EU) have agreed upon a common position in the international negotiations on the limitation of greenhouse gas emissions. The total commitment of the EU is the result of differentiated emission targets for the individual Member States. In this study the results of 4 recent scenario studies on CO2 emission reduction are used to assess the fairness and the cost-effectiveness of the differentiated targets. Here, fairness is measured by the average cost per capita in a country to reach the emission target. Cost-effectiveness is based on the marginal cost of emission reduction. It is noted that there are limitations in the comparability of the country results. Further, the coverage of the EU Member States is not complete in all 4 studies. Robust conclusions could thus not be drawn for all countries. Nonetheless, there are strong indications that the efforts to achieve the emission reduction targets are not evenly distributed. Based on the results the countries can be divided into four groups with different burdens to achieve reduction of CO2 emissions: (a) countries that will probably be faced with above average burdens: Sweden, Italy and the Netherlands; (b) countries that will presumably be faced with above average burdens but for which limited information is available: Austria and Denmark; (c) countries that will probably be faced with average burdens or for which the relative efforts are indistinct: Germany, Portugal, Belgium, Finland and Luxembourg; and (d) countries that will probably be faced with below average burdens: United Kingdom, France, Spain, Ireland and Greece. 1 fig., 12 tabs., 6 refs

  17. Analysis of PTV margin for IMRT and VMAT techniques in prostate cancer using IGRT; Analise de margem de PTV para as tecnicas de IMRT e VMAT em cancer de prostata utilizando IGRT

    Energy Technology Data Exchange (ETDEWEB)

    Sandrini, E.S.; Silveira, T.B.; Vieira, D.S.; Anjos, L.E.A.; Lopez, J.C.C.; Batista, D.V.S., E-mail: emmilyfisica@gmail.com [Instituto Nacional de Cancer Jose de Alencar Gomes da Silva, Rio de Janeiro, RJ (Brazil)

    2014-08-15

    Clinical radiotherapy procedures aim at high precision. However, there are many errors sources that act during treatment preparation and execution that limit its accuracy. The use of imaged-guided radiotherapy (IGRT) increases the agreement between the planned dose and the actual dose deposited in the target, at the same time allows to evaluate the uncertainties related to the setup and a possible reduction in the planning target volume (PTV) margin. Thus the aim of this study was to determine the best PTV margin to be used in radiotherapy treatment of prostate cancer using intensity modulated radiotherapy (IMRT) and volumetric modulated arc radiotherapy (VMAT) techniques associated with IGRT. A total of four patients with prostate daily cone beam computed tomography (CBCT) were analyzed. Systematic and random errors were calculated statistically based on the displacements couch for 128 CBCTs. It was found that a symmetric margin of 0.75 cm from clinical treatment volume (CTV) to PTV is sufficient to encompass the uncertainties inherent to the treatment applying IGRT. Besides without that and maintaining the same tumor control probability, a symmetric margin of 1,24 cm would be necessary. This study showed that using daily image verification the setup errors are reduced, which generates a lower PTV margin. (author)

  18. A Reliability Comparison of Classical and Stochastic Thickness Margin Approaches to Address Material Property Uncertainties for the Orion Heat Shield

    Science.gov (United States)

    Sepka, Steve; Vander Kam, Jeremy; McGuire, Kathy

    2018-01-01

    The Orion Thermal Protection System (TPS) margin process uses a root-sum-square approach with branches addressing trajectory, aerothermodynamics, and material response uncertainties in ablator thickness design. The material response branch applies a bond line temperature reduction between the Avcoat ablator and EA9394 adhesive by 60 C (108 F) from its peak allowed value of 260 C (500 F). This process is known as the Bond Line Temperature Material Margin (BTMM) and is intended to cover material property and performance uncertainties. The value of 60 C (108 F) is a constant, applied at any spacecraft body location and for any trajectory. By varying only material properties in a random (monte carlo) manner, the perl-based script mcCHAR is used to investigate the confidence interval provided by the BTMM. In particular, this study will look at various locations on the Orion heat shield forebody for a guided and an abort (ballistic) trajectory.

  19. Influence of abutment screw preload on stress distribution in marginal bone.

    Science.gov (United States)

    Khraisat, Ameen

    2012-01-01

    Changes in an implant assembly after abutment connection might possibly cause deformation in the implant/abutment joint and even in the marginal bone. The aim of this study was to evaluate the influence of abutment screw preload through the implant collar on marginal bone stress without external load application. Models of three implant parts made of titanium (implant, abutment, and abutment screw) and cortical bone were built and positioned with computer-aided design software. Meshing and generation of boundary conditions, loads, and interactions were performed. Each part was meshed independently. The sole load applied to the model was a torque of 32 Ncm on the abutment screw about its axis of rotation. The implant collar was deformed axially after the screw was tightened (3 μm). This deformation resulted in 60 MPa of stress in the marginal bone. Moreover, pressure on the marginal bone in a radial direction was observed. It can be concluded that, without any external load application, abutment screw preload exerts stresses on the implant collar and the marginal bone. These findings should help guide the development of new implant/abutment joint designs that exert less stress on the marginal bone.

  20. CRBRP structural and thermal margin beyond the design base

    International Nuclear Information System (INIS)

    Strawbridge, L.E.

    1979-01-01

    Prudent margins beyond the design base have been included in the design of Clinch River Breeder Reactor Plant to further reduce the risk to the public from highly improbable occurrences. These margins include Structural Margin Beyond the Design Base to address the energetics aspects and Thermal Margin Beyond the Design Base to address the longer term thermal and radiological consequences. The assessments that led to the specification of these margins are described, along with the experimental support for those assessments. 8 refs

  1. Nonlinear dynamics near the stability margin in rotating pipe flow

    Science.gov (United States)

    Yang, Z.; Leibovich, S.

    1991-01-01

    The nonlinear evolution of marginally unstable wave packets in rotating pipe flow is studied. These flows depend on two control parameters, which may be taken to be the axial Reynolds number R and a Rossby number, q. Marginal stability is realized on a curve in the (R, q)-plane, and the entire marginal stability boundary is explored. As the flow passes through any point on the marginal stability curve, it undergoes a supercritical Hopf bifurcation and the steady base flow is replaced by a traveling wave. The envelope of the wave system is governed by a complex Ginzburg-Landau equation. The Ginzburg-Landau equation admits Stokes waves, which correspond to standing modulations of the linear traveling wavetrain, as well as traveling wave modulations of the linear wavetrain. Bands of wavenumbers are identified in which the nonlinear modulated waves are subject to a sideband instability.

  2. Chromium isotope composition of reducing and anoxic sediments from the Peru Margin and Cariaco Basin

    Science.gov (United States)

    Gueguen, B.; Planavsky, N.; Wang, X.; Algeo, T. J.; Peterson, L. C.; Reinhard, C. T.

    2014-12-01

    Chromium isotope systematics in marine sediments are now being used as a new redox proxy of the modern and ancient Earth's surface. Chromium is primarily delivered to the oceans by riverine inputs through weathering of Cr(III)-rich minerals present in the continental crust and oxidation of insoluble Cr(III) to soluble Cr(VI) species. Since oxidation-reduction reactions fractionate Cr isotopes whereby oxidized Cr(VI) species are preferentially enriched in heavy Cr isotopes, the Cr isotope composition of marine sediments may be useful tracers of redox conditions at the Earth's surface through geological time. Chromium is quantitatively removed in organic-rich sediments where reducing conditions prevail and promote reduction of Cr(VI) to Cr(III), and thus, these sediments should capture the ambient seawater Cr isotope composition. However, the isotopic composition of modern organic-rich sediments is poorly documented so far, and this step is essential for further modeling the global oceanic Cr isotope mass balance and assessing the effects of sedimentation and post-depositional processes on the marine Cr isotopes archive. In this study, we have characterized modern marine organic-rich sediments for their Cr isotope composition (δ53/52Cr) from two different settings, the Peru margin upwelling zone and the anoxic Cariaco Basin (Venezuela). Chromium isotopes were measured on a MC-ICP-MS (Nu Plasma) using a double-spike correction method. The authigenic fraction of shallow samples from the Peru margin sedimentary sequence with a high Total Organic Carbon (TOC) content (>10 wt%) yield an average δ53/52Crauthigenic value of +0.67 ±0.05 ‰ (2sd). However, although this value is close to the seawater value (Atlantic Ocean) and to Cariaco basin sediments (~ +0.6 ‰), reducing sediments from the Peru margin are on average isotopically slightly heavier, especially in samples having a low authigenic fraction and a low TOC content (δ53/52Crauthigenic values up to +1.30

  3. Ultramicroelectrode studies of oxygen reduction in polyelectrolyte membranes

    Energy Technology Data Exchange (ETDEWEB)

    Holdcroft, S.; Abdou, M.S.; Beattie, P.; Basura, V. [Simon Fraser Univ., Burnaby, BC (Canada). Dept. of Chemistry

    1997-12-31

    A study on the oxygen reduction reaction in a solid state electrochemical cell was presented. The oxygen reduction reaction is a rate limiting reaction in the operation of solid polymer electrolyte fuel cells which use H{sub 2} and O{sub 2}. Interest in the oxygen reduction reaction of platinum electrodes in contact with Nafion electrolytes stems from its role in fuel cell technology. The kinetics of the oxygen reduction reaction in different polyelectrolyte membranes, such as Nafion and non-Nafion membranes, were compared. The electrode kinetics and mass transport parameters of the oxygen reduction reaction in polyelectrolyte membranes were measured by ultramicroelectrode techniques. The major difference found between these two classes of membrane was the percentage of water, which is suggestive of superior electrochemical mass transport properties of the non-Nafion membranes. 2 refs. 1 fig.

  4. Positive Surgical Margins in Favorable-Stage Differentiated Thyroid Cancer.

    Science.gov (United States)

    Mercado, Catherine E; Drew, Peter A; Morris, Christopher G; Dziegielewski, Peter T; Mendenhall, William M; Amdur, Robert J

    2018-04-16

    The significance of positive margin in favorable-stage well-differentiated thyroid cancer is controversial. We report outcomes of positive-margin patients with a matched-pair comparison to a negative-margin group. A total of 25 patients with classic-histology papillary or follicular carcinoma, total thyroidectomy +/- node dissection, stage T1-3N0-1bM0, positive surgical margin at primary site, adjuvant radioactive iodine (I-131), and age older than 18 years were treated between 2003 and 2013. Endpoints were clinical and biochemical (thyroglobulin-only) recurrence-free survival. Matched-pair analysis involved a 1:1 match with negative-margin cases matched for overall stage and I-131 dose. Recurrence-free survival in positive-margin patients was 71% at 10 years. No patient was successfully salvaged with additional treatment. Only 1 patient died of thyroid cancer. Recurrence-free survival at 10 years was worse with a positive (71%) versus negative (90%) margin (P=0.140). Cure with a microscopically positive margin was suboptimal (71%) despite patients having classic-histology papillary and follicular carcinoma, favorable stage, and moderate-dose I-131 therapy.

  5. Influence of margin segmentation and anomalous volcanism upon the break-up of the Hatton Bank rifted margin, west of the UK

    Science.gov (United States)

    Elliott, G. M.; Parson, L. M.

    2007-12-01

    The Hatton Bank margin, flanking the Iceland Basin is a widely cited example of a volcanic rifted margin. Prior to this study insights into the break-up history of the margin have been limited to profiles in the north and south, yet whilst valuable, the along margin tectono-magmatic variability has not been revealed. Over 5660 line km of high quality reflection seismic profiles with supplementary multibeam bathymetry were collected to support the UK's claim to Hatton region under the United Nations Convention on Law of the Sea (UNCLOS). Integration of this new data with existing profiles, allowed the margin to be divided into three segments, each of which are flanked by oceanic crust with a smooth upper surface and internal dipping reflectors. The southernmost segment is characterised by a series of inner and outer seaward dipping reflector (SDR) packages, which are separated by an outer high feature. The outer SDR are truncated by Endymion Spur, a chain of steep sided, late stage volcanic cones linked with necks. The central sector has no inner SDR package and is characterised by the presence of a highly intruded continental block, the Hatton Bank Block (HBB). The northern sector is adjacent to Lousy Bank, with a wider region of SDR recognised than to the south and a high amount of volcanic cones imaged. The variations in the distribution of the SDR's along the margin, the presence of the HBB and Endymion Spur all suggest that the break-up process was not uniform alongstrike. The division of the margin into three sectors reveals that structural segmentation played an important role in producing the variations along the margin. Break- up initiated in the south and progressed north producing the SDR packages witnessed, when the HBB was encountered the focus of break-up moved seaward of the block. The northern sector was closer to the Iceland Hotspot and hence a greater amount of volcanism is encountered. The smooth oceanic basement also indicates a high thermal flux

  6. Learning Convex Inference of Marginals

    OpenAIRE

    Domke, Justin

    2012-01-01

    Graphical models trained using maximum likelihood are a common tool for probabilistic inference of marginal distributions. However, this approach suffers difficulties when either the inference process or the model is approximate. In this paper, the inference process is first defined to be the minimization of a convex function, inspired by free energy approximations. Learning is then done directly in terms of the performance of the inference process at univariate marginal prediction. The main ...

  7. Marginal versus Average Beta of Equity under Corporate Taxation

    OpenAIRE

    Lund, Diderik

    2009-01-01

    Even for fully equity-financed firms there may be substantial effects of taxation on the after-tax cost of capital. Among the few studies of these effects, even fewer identify all effects correctly. When marginal investment is taxed together with inframarginal, marginal beta differs from average if there are investment-related deductions like depreciation. To calculate asset betas, one should not only 'unlever observed equity betas, but 'untax' and 'unaverage' them. Risky tax claims are value...

  8. Asymmetric rifting, breakup and magmatism across conjugate margin pairs: insights from Newfoundland to Ireland

    Science.gov (United States)

    Peace, Alexander L.; Welford, J. Kim; Foulger, Gillian R.; McCaffrey, Ken J. W.

    2017-04-01

    Continental extension, subsequent rifting and eventual breakup result in the development of passive margins with transitional crust between extended continental crust and newly created oceanic crust. Globally, passive margins are typically classified as either magma-rich or magma-poor. Despite this simple classification, magma-poor margins like the West Orphan Basin, offshore Newfoundland, do exhibit some evidence of localized magmatism, as magmatism to some extent invariably accompanies all continental breakup. For example, on the Newfoundland margin, a small volcanic province has been interpreted near the termination of the Charlie Gibbs Fracture Zone, whereas on the conjugate Irish margin within the Rockall Basin, magmatism appears to be more widespread and has been documented both in the north and in the south. The broader region over which volcanism has been identified on the Irish margin is suggestive of magmatic asymmetry across this conjugate margin pair and this may have direct implications for the mechanisms governing the nature of rifting and breakup. Possible causes of the magmatic asymmetry include asymmetric rifting (simple shear), post-breakup thermal anomalies in the mantle, or pre-existing compositional zones in the crust that predispose one of the margins to more melting than its conjugate. A greater understanding of the mechanisms leading to conjugate margin asymmetry will enhance our fundamental understanding of rifting processes and will also reduce hydrocarbon exploration risk by better characterizing the structural and thermal evolution of hydrocarbon bearing basins on magma-poor margins where evidence of localized magmatism exists. Here, the latest results of a conjugate margin study of the Newfoundland-Ireland pair utilizing seismic interpretation integrated with other geological and geophysical datasets are presented. Our analysis has begun to reveal the nature and timing of rift-related magmatism and the degree to which magmatic asymmetry

  9. Gravity anomalies over a segment of Pratap ridge and adjoining shelf margin basin, western continental margin of India

    Digital Repository Service at National Institute of Oceanography (India)

    Subrahmanyam, V.; Rao, D.G.; Ramprasad, T.; KameshRaju, K.A.; Rao, M.G.

    Bathymetric and gravity data totalling 2000 line km on the continental margin off Goa and Mulki, west of India have been studied. The free-air gravity anomalies vary between -60 to 25 mgals with prominent NNW-SSE trends in the outer shelf region...

  10. Dose reduction and optimization studies (ALARA) at nuclear power facilities

    International Nuclear Information System (INIS)

    Baum, J.W.; Meinhold, C.B.

    1983-01-01

    Brookhaven National Laboratory (BNL) has been commissioned by the Nuclear Regulatory Commission (NRC) to study dose-reduction techniques and effectiveness of as low as reasonably achievable (ALARA) planning at LWR plants. These studies have the following objectives: identify high-dose maintenance tasks; identify dose-reduction techniques; examine incentives for dose reduction; evaluate cost-effectiveness and optimization of dose-reduction techniques; and compile an ALARA handbook on data, engineering modifications, cost-effectiveness calculations, and other information of interest to ALARA practioners

  11. Study of transient burnout under flow reduction condition

    International Nuclear Information System (INIS)

    Iwamura, Takamichi

    1986-09-01

    Transient burnout characteristics of a fuel rod under a rapid flow reduction condition of a light water reactor were experimentally and analytically studied. The test sections were uniformly heated vertical tube and annulus with the heated length of 800 mm. Test pressures ranged 0.5 ∼ 3.9 MPa, heat fluxes 2,160 ∼ 3,860 KW/m 2 , and flow reduction rates 0.44 ∼ 770 %/s. The local flow condition during flow reduction transients were calculated with a separate flow model. The two-fluid/three-field thermal-hydraulic code, COBRA/TRAC, was also used to investigate the liquid film behavior on the heated surface. The major results obtained in the present study are as follows: The onset of burnout under a rapid flow reduction condition was caused by a liquid film dryout on the heated surface. With increasing flow reduction rate beyond a threshold, the burnout mass velocity at the inlet became lower than the steady-state burnout mass velocity. This is explained by the fact that the vapor flow rate continues to increase due to the delay of boiling boundary movement and the resultant high vapor velocity sustains the liquid film flow after the inlet flow rate reaches the steady-state burnout flow rate. The ratio of inlet burnout mass velocities between flow reduction transient and steady-state became smaller with increasing system pressure because of the lower vapor velocity due to the lower vapor specific volume. Flow reduction burnout occurred when the outlet quality agreed with the steady-state burnout quality within 10 %, suggesting that the local condition burnout model can be used for flow reduction transients. Based on this model, a method to predict the time to burnout under a flow reduction condition in a uniformly heated tube was developed. The calculated times to burnout agreed well with some experimental results obtained by the Author, Cumo et al., and Moxon et al. (author)

  12. Spectrum estimation method based on marginal spectrum

    International Nuclear Information System (INIS)

    Cai Jianhua; Hu Weiwen; Wang Xianchun

    2011-01-01

    FFT method can not meet the basic requirements of power spectrum for non-stationary signal and short signal. A new spectrum estimation method based on marginal spectrum from Hilbert-Huang transform (HHT) was proposed. The procession of obtaining marginal spectrum in HHT method was given and the linear property of marginal spectrum was demonstrated. Compared with the FFT method, the physical meaning and the frequency resolution of marginal spectrum were further analyzed. Then the Hilbert spectrum estimation algorithm was discussed in detail, and the simulation results were given at last. The theory and simulation shows that under the condition of short data signal and non-stationary signal, the frequency resolution and estimation precision of HHT method is better than that of FFT method. (authors)

  13. van Manen's method and reduction in a phenomenological hermeneutic study.

    Science.gov (United States)

    Heinonen, Kristiina

    2015-03-01

    To describe van Manen's method and concept of reduction in a study that used a phenomenological hermeneutic approach. Nurse researchers have used van Manen's method in different ways. Participants' lifeworlds are described in depth, but descriptions of reduction have been brief. The literature and knowledge review and manual search of research articles. Databases Web Science, PubMed, CINAHL and PsycINFO, without applying a time period, to identify uses of van Manen's method. This paper shows how van Manen's method has been used in nursing research and gives some examples of van Manen's reduction. Reduction enables us to conduct in-depth phenomenological hermeneutic research and understand people's lifeworlds. As there are many variations in adapting reduction, it is complex and confusing. This paper contributes to the discussion of phenomenology, hermeneutic study and reduction. It opens up reduction as a method for researchers to exploit.

  14. Impact of Close and Positive Margins in Transoral Laser Microsurgery for Tis–T2 Glottic Cancer

    Directory of Open Access Journals (Sweden)

    Ivana Fiz

    2017-10-01

    Full Text Available IntroductionTransoral laser microsurgery (TLM represents one of the most effective treatment strategies for Tis–T2 glottic squamous cell carcinomas (SCC. The prognostic influence of close/positive margins is still debated, and the role of narrow band imaging (NBI in their intraoperative definition is still to be validated on large cohort of patients. This study analyzed the influence of margin status on recurrence-free survival (RFS and disease-specific survival (DSS.MethodsWe retrospectively studied 507 cases of pTis–T1b (Group A and 127 cases of pT2 (Group B glottic SCC. We identified the following margin status: negative (n = 232, close superficial (n = 79, close deep (CD (n = 35, positive single superficial (n = 146, positive multiple superficial (n = 94, and positive deep (n = 48 and analyzed their impact on RFS and DSS. Close margins were defined by tumor-margin distance <1 mm. Pre-TLM margins were defined by white light in 323 patients, whereas NBI was employed in 311 patients.ResultsIn Group A, DSS and RFS were reduced in positive multiple superficial and positive deep margins (DSS = 96.1 and 97%, both p < 0.05; RFS = 72%, p < 0.001 and 75.8%, p < 0.01. In Group B, DSS was reduced in positive multiple superficial margins (82.4%, p < 0.05. RFS was reduced in positive single superficial, positive multiple superficial, and positive deep margins (62.5, 41.2, and 53.3%, p < 0.01. In the entire population, RFS was reduced in CD margins (77.1%, p < 0.05. Use of NBI led to improvement in RFS and DSS.ConclusionThe study indicates that close and positive single superficial margins do not affect DSS. By contrast, all types of margin positivity predict the occurrence of relapses, albeit with different likelihood, depending on stage/margin type. CD margins should be considered as a single risk factor. Use of NBI granted better intraoperative margins definition.

  15. Phenomenon of Women Marginalization in Poor Family in Pakpak Community (A Case Study in Pegagan Julu Village, Sumbul Subdistrict, Dairi Regency - North Sumatra - Indonesia)

    OpenAIRE

    Hadriana Marhaeni Munthe

    2017-01-01

    This article is taken from the study of marginalization cases experienced by Pakpak women of rural poor families. The study was conducted in Pegagan village of Sumbul Subdistrict, Dairi, North Sumatra province. The marginalization phenomenon is shown in some aspects; restrictions on women's access to formal education, tendency of dropping out of school, having no inheritance rights and no role in the decision making of custom. Related to this phenomenon, the research question of this study is...

  16. Thermal margin model for transition core of KSNP

    International Nuclear Information System (INIS)

    Nahm, Kee Yil; Lim, Jong Seon; Park, Sung Kew; Chun, Chong Kuk; Hwang, Sun Tack

    2004-01-01

    The PLUS7 fuel was developed with mixing vane grids for KSNP. For the transition core partly loaded with the PLUS7 fuels, the procedure to set up the optimum thermal margin model of the transition core was suggested by introducing AOPM concept into the screening method which determines the limiting assembly. According to the procedure, the optimum thermal margin model of the first transition core was set up by using a part of nuclear data for the first transition and the homogeneous core with PLUS7 fuels. The generic thermal margin model of PLUS7 fuel was generated with the AOPM of 138%. The overpower penalties on the first transition core were calculated to be 1.0 and 0.98 on the limiting assembly and the generic thermal margin model, respectively. It is not usual case to impose the overpower penalty on reload cores. It is considered that the lack of channel flow due to the difference of pressure drop between PLUS7 and STD fuels results in the decrease of DNBR. The AOPM of the first transition core is evaluated to be about 135% by using the optimum generic thermal margin model which involves the generic thermal margin model and the total overpower penalty. The STD fuel is not included among limiting assembly candidates in the second transition core, because they have much lower pin power than PLUS7 fuels. The reduced number of STD fuels near the limiting assembly candidates the flow from the limiting assembly to increase the thermal margin for the second transition core. It is expected that cycle specific overpower penalties increase the thermal margin for the transition core. Using the procedure to set up the optimum thermal margin model makes sure that the enhanced thermal margin of PLUS7 fuel can be sufficiently applied to not only the homogeneous core but also the transition core

  17. Pricing hospital care: Global budgets and marginal pricing strategies.

    Science.gov (United States)

    Sutherland, Jason M

    2015-08-01

    The Canadian province of British Columbia (BC) is adding financial incentives to increase the volume of surgeries provided by hospitals using a marginal pricing approach. The objective of this study is to calculate marginal costs of surgeries based on assumptions regarding hospitals' availability of labor and equipment. This study is based on observational clinical, administrative and financial data generated by hospitals. Hospital inpatient and outpatient discharge summaries from the province are linked with detailed activity-based costing information, stratified by assigned case mix categorizations. To reflect a range of operating constraints governing hospitals' ability to increase their volume of surgeries, a number of scenarios are proposed. Under these scenarios, estimated marginal costs are calculated and compared to prices being offered as incentives to hospitals. Existing data can be used to support alternative strategies for pricing hospital care. Prices for inpatient surgeries do not generate positive margins under a range of operating scenarios. Hip and knee surgeries generate surpluses for hospitals even under the most costly labor conditions and are expected to generate additional volume. In health systems that wish to fine-tune financial incentives, setting prices that create incentives for additional volume should reflect knowledge of hospitals' underlying cost structures. Possible implications of mis-pricing include no response to the incentives or uneven increases in supply. Copyright © 2015 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

  18. Polyphase Rifting and Breakup of the Central Mozambique Margin

    Science.gov (United States)

    Senkans, Andrew; Leroy, Sylvie; d'Acremont, Elia; Castilla, Raymi

    2017-04-01

    The breakup of the Gondwana supercontinent resulted in the formation of the Central Mozambique passive margin as Africa and Antarctica were separated during the mid-Jurassic period. The identification of magnetic anomalies in the Mozambique Basin and Riiser Larsen Sea means that post-oceanisation plate kinematics are well-constrained. Unresolved questions remain, however, regarding the initial fit, continental breakup process, and the first relative movements of Africa and Antarctica. This study uses high quality multi-channel seismic reflection profiles in an effort to identify the major crustal domains in the Angoche and Beira regions of the Central Mozambique margin. This work is part of the integrated pluri-disciplinary PAMELA project*. Our results show that the Central Mozambique passive margin is characterised by intense but localised magmatic activity, evidenced by the existence of seaward dipping reflectors (SDR) in the Angoche region, as well as magmatic sills and volcanoclastic material which mark the Beira High. The Angoche region is defined by a faulted upper-continental crust, with the possible exhumation of lower crustal material forming an extended ocean-continent transition (OCT). The profiles studied across the Beira high reveal an offshore continental fragment, which is overlain by a pre-rift sedimentary unit likely to belong to the Karoo Group. Faulting of the crust and overlying sedimentary unit reveals that the Beira High has recorded several phases of deformation. The combination of our seismic interpretation with existing geophysical and geological results have allowed us to propose a breakup model which supports the idea that the Central Mozambique margin was affected by polyphase rifting. The analysis of both along-dip and along-strike profiles shows that the Beira High initially experienced extension in a direction approximately parallel to the Mozambique coastline onshore of the Beira High. Our results suggest that the Beira High results

  19. Margins in Swedish district heating systems; Marginaler i Fjaerrvaermesystem

    Energy Technology Data Exchange (ETDEWEB)

    Selinder, Patrik; Zinko, Heimo [ZW Energiteknik AB, Nykoeping (Sweden)

    2003-03-01

    occasions with power deficiency will occur more often. The lower limit for the reduction of connection power is depending on the level of comfort the customers are prepared to accept. These questions have been discussed with selected customer representatives. The mentioned practice of oversizing of the heating power deliverable to the buildings presents a relatively large margin for reduction of consumable power without decreasing the level of heating comfort too much. In the report this method is recommended under the name 'stingy' (= adequate) dimensioning; it is still according to the recommendation of the Swedish building code based on DUT20 and following the regulations of the Swedish District Heating Association for the domestic hot water dimensioning. The result will be a decrease of about 30% of the connected power in most buildings, and somewhat more in the heaviest buildings. Further reduction of the connecting power will implicate a more strong impact on the heating comfort. We call this 'deficiency dimensioning' and we cannot really recommend it apart from some special customer groups who might accept this heating quality by receiving some kind of economic compensation.

  20. Early math intervention for marginalized students

    DEFF Research Database (Denmark)

    Overgaard, Steffen; Tonnesen, Pia Beck

    2016-01-01

    This study is one of more substudies in the project Early Math Intervention for Marginalized Students (TMTM2014). The paper presents the initial process of this substudy that will be carried out fall 2015. In the TMTM2014 project, 80 teachers, who completed a one week course in the idea of TMTM...

  1. Assessment of margins in resection specimens for head and neck malignancies

    International Nuclear Information System (INIS)

    Janjua, O. S.; Ahmed, W.; Ahmed, A.; Qureshi, S. M.; Khan, T. S.; Alamgir, W.

    2013-01-01

    Objective: To determine the relative frequency of clear, close and involved margins in resection specimens for head and neck malignancies. Study Design: An observational study. Place and Duration of Study: The Department of Oral and Maxillofacial Surgery, Armed Forces Institute of Dentistry, Rawalpindi and the Department of Histopathology, Armed Forces Institute of Pathology, Rawalpindi, from January 2008 to December 2010. Methodology: Tumour registers and computer data bases in the department of Histopathology of Armed Forces Institute of Pathology, Rawalpindi, were analyzed for the cases of malignancies involving head and neck region that were sent for histopathological analysis after resection in the last three years. Histopathology reports were obtained. The data regarding age, gender, site, type of malignancy and margin status (clear, close or involved) was recorded on specially designed proformas for the study and later on analyzed by using SPSS version 17.0. Results were expressed. Results: A total of 319 cases were registered in the study duration. The age of the patients ranged from 22 - 90 years (mean 59.5 + 14.1 years). Male to female ratio was 1.53:1. One hundred and thirty six (42.6%) were squamous cell carcinoma (SCC), 163 were basal cell carcinomas (BCC, 51.0%); the rest included 18 salivary gland malignancies (5.7%) and one carcino-sarcoma (0.31%) and chondrosarcoma each. All margins were found clear in 137 patients (42.9%); involved in 168 cases (52.7%) and close in 14 cases (4.4%). Conclusion: Margin clearance could not be achieved in more than 50% cases, this can lead to poor prognosis. Hence, methods should be adopted to improve the margin clearance in various head and neck malignancies. (author)

  2. Tiago Marques Aipobureu: um bororo marginal Tiago Marques Aipobureu: a Bororo on the margins

    Directory of Open Access Journals (Sweden)

    Florestan Fernandes

    2007-11-01

    Full Text Available O texto analisa a biografia de um membro da tribo dos Bororo, Tiago Marques Aipobureu, que, nascido no planalto oriental de Mato Grosso, foi levado pelos missionários para estudar em Cuiabá e depois viajou pela Europa. Quando de seu retorno ao Brasil, foi empregado como professor, mas não conseguiu adaptar-se à nova vida. Casado com uma mulher de sua tribo, buscou então reintegrar-se aos Bororo, igualmente sem sucesso. Permanecia, desse modo, no meio do caminho, incapaz de integrar-se plenamente tanto à sociedade e cultura "civilizadas" como à sociedade e cultura indígenas. O desajustamento de Tiago evidencia a situação do homem marginal, daquele que se situa na divisa de duas raças, na margem de duas culturas sem conseguir pertencer integralmente a nenhuma delas.The text analyzes the biography of a member of the Bororo tribe, Tiago Marques Aipobureu. Born on the eastern plateau of Mato Grosso, he was taken by missionaries to study in Cuiabá and later travelled through Europe. On returning to Brazil, he was employed as a teacher, but was unable to adapt to his new life. Married to a woman from his tribe, he tried to rejoin the Bororo, likewise without success. Thus he found himself midway between worlds, unable to join fully either 'civilized' society and culture, or indigenous society and culture. Tiago's maladjustment exemplifies the situation of the marginal person, someone situated on the dividing line between two races, on the margin of two cultures, unable to belong wholly to either.

  3. Smoking reduction and biomarkers in two longitudinal studies

    DEFF Research Database (Denmark)

    Godtfredsen, Nina; Prescott, Eva; Vestbo, Jørgen

    2006-01-01

    AIMS: To measure reduction in exposure to smoke in two population-based studies of self-reported smoking reduction not using nicotine replacement. DESIGN: Cross-sectional analyses of biomarkers and smoking. SETTING: Data from two time-points in the Copenhagen City Heart Study (CCHS), 1981....../83 and 1991/94, and the Copenhagen Male Study (CMS) in 1976 and 1985/86, respectively. PARTICIPANTS: There were 3026 adults who were smokers at both time-points in the CCHS and 1319 men smoking at both time-points in the CMS. MEASUREMENTS: Smoking status and tobacco consumption were assessed by self...... a reduction in cigarettes per day of 50% or more without quitting were compared with continuing medium, heavy and light smokers (1-14 g/day) using linear regression. Sex (CCHS only), age, self-reported inhalation of smoke, duration of smoking, type of tobacco and amount smoked were included as covariates...

  4. Plasticity margin recovery during annealing after cold deformation

    International Nuclear Information System (INIS)

    Bogatov, A.A.; Smirnov, S.V.; Kolmogorov, V.L.

    1978-01-01

    Restoration of the plasticity margin in steel 20 after cold deformation and annealing at 550 - 750 C and soaking for 5 - 300 min was investigated. The conditions of cold deformation under which the metal acquires microdefects unhealed by subsequent annealing were determined. It was established that if the degree of utilization of the plasticity margin is psi < 0.5, the plasticity margin in steel 20 can be completely restored by annealing. A mathematical model of restoration of the plasticity margin by annealing after cold deformation was constructed. A statistical analysis showed good agreement between model and experiment

  5. Comparison of marginal and internal adaptation of copings fabricated from three different fabrication techniques: An in vitro study

    Directory of Open Access Journals (Sweden)

    Aman Arora

    2018-01-01

    Conclusion: Marginal and internal discrepancies of all the three casting techniques were within clinically acceptable values. Marginal fit of DMLS was superior as compared to other two techniques, whereas when internal fit was evaluated, conventional technique showed the best internal fit.

  6. Clinical Effect of Dental Adhesive on Marginal Integrity in Class I And Class II Resin-Composite Restorations

    Directory of Open Access Journals (Sweden)

    Manchorova-Veleva Neshka A.

    2015-12-01

    Full Text Available BACKGROUND: Dental adhesives are believed to influence marginal adaptation and marginal discoloration when used under posterior resin-based composite restorations. Studies on the latest adhesive systems reveal that the group of the three-step etch-and-rinse adhesive (3-E&RA and the one-step self-etch adhesive (1-SEA have entirely different bonding mechanisms, as well as different bond strength and resistance to chemical, thermal and mechanical factors. STUDY OBJECTIVES: A hypothesis that a 1-SEA would result in greater enamel marginal discoloration and poorer marginal adaptation than a 3-E&RA was tested. MATERIAL AND METHODS: One hundred restorations were placed with a 1-SEA and 100 restorations with a 3-E&RA. Teeth were restored with Filtek Supreme nanofilled resin-composite and were evaluated for marginal adaptation and marginal discoloration at baseline, and 6 months, 12 months, and 36 months postoperatively. RESULTS: The statistical analysis revealed significant differences in marginal integrity between test groups. The 1-SEA resulted in greater enamel marginal discoloration and poorer marginal adaptation than the 3-E&RA at any recall time. CONCLUSIONS: Marginal adaptation and marginal discoloration depend on the type of dentin adhesive used. The restorations with Filtek Supreme and Scotchbond MP are better than the restorations with Adper Prompt L-Pop with regard to the marginal adaptation and marginal discoloration at 6-, 12- and 36-month evaluations.

  7. Parent-Child Cultural Marginalization and Depressive Symptoms in Asian American Family Members

    Science.gov (United States)

    Kim, Su Yeong; Gonzales, Nancy A.; Stroh, Kunise; Wang, Jenny Jiun-Ling

    2006-01-01

    The current study findings refute the recent claim that marginality theory lacks construct validity. Cultural marginalization is significantly related to depressive symptoms in Korean American, Chinese American, and Japanese American parents and adolescents living in the United States. Correlational analyses indicate that adolescents' depressive…

  8. Atlantic continental margin of the United States

    Science.gov (United States)

    Grow, John A.; Sheridan, Robert E.; Palmer, A.R.

    1982-01-01

    The objective of this Decade of North American Geology (D-NAG) volume will be to focus on the Mesozoic and Cenozoic evolution of the U.S. Atlantic continental margin, including the onshore coastal plain, related onshore Triassic-Jurassic rift grabens, and the offshore basins and platforms. Following multiple compressional tectonic episodes between Africa and North America during the Paleozoic Era that formed the Appalachian Mountains, the Mesozoic and Cenozoic Eras were dominated by tensional tectonic processes that separated Africa and North America. Extensional rifting during Triassic and Early Jurassic times resulted in numerous tensional grabens both onshore and offshore, which filled with nonmarine continental red beds, lacustrine deposits, and volcanic flows and debris. The final stage of this breakup between Africa and North America occurred beneath the present outer continental shelf and continental slope during Early or Middle Jurassic time when sea-floor spreading began to form new oceanic crust and lithosophere between the two continents as they drifted apart. Postrift subsidence of the marginal basins continued in response to cooling of the lithosphere and sedimentary loading.Geophysical surveys and oil-exploration drilling along the U.S. Atlantic continental margin during the past 5 years are beginning to answer many questions concerning its deep structure and stratigraphy and how it evolved during the rifting and early sea-floor-spreading stages of the separation of this region from Africa. Earlier geophysical studies of the U.S. continental margin used marine refraction and submarine gravity measurements. Single-channel seismic-reflection, marine magnetic, aeromagnetic, and continuous gravity measurements became available during the 1960s.

  9. Reinforcing marginality? Maternal health interventions in rural Nicaragua.

    Science.gov (United States)

    Kvernflaten, Birgit

    2017-06-23

    To achieve Millennium Development Goal 5 on maternal health, many countries have focused on marginalized women who lack access to care. Promoting facility-based deliveries to ensure skilled birth attendance and emergency obstetric care has become a main measure for preventing maternal deaths, so women who opt for home births are often considered 'marginal' and in need of targeted intervention. Drawing upon ethnographic data from Nicaragua, this paper critically examines the concept of marginality in the context of official efforts to increase institutional delivery amongst the rural poor, and discusses lack of access to health services among women living in peripheral areas as a process of marginalization. The promotion of facility birth as the new norm, in turn, generates a process of 're-marginalization', whereby public health officials morally disapprove of women who give birth at home, viewing them as non-compliers and a problem to the system. In rural Nicaragua, there is a discrepancy between the public health norm and women's own preferences and desires for home birth. These women live at the margins also in spatial and societal terms, and must relate to a health system they find incapable of providing good, appropriate care. Strong public pressure for institutional delivery makes them feel distressed and pressured. Paradoxically then, the aim of including marginal groups in maternal health programmes engenders resistance to facility birth.

  10. Experiences with recruitment of marginalized groups in a Danish health promotion program

    DEFF Research Database (Denmark)

    Rasmussen, Marianne; Poulsen, Eva Kanstrup; Rytter, Anne Stoffersen

    2016-01-01

    neighborhoods across Denmark between 2010 and 2014. The aim of this study was to understand how recruitment approaches could promote participation in health programs within deprived neighborhoods to reach marginalized groups. METHOD: Documents from all 12 of the included municipalities were collected to conduct......BACKGROUND: Studies have found that marginalized groups living in deprived neighborhoods are less likely to participate in health programs compared to the majority of society. This study evaluates recruitment approaches conducted during a national government-funded project in 12 deprived...... have developed evaluations related to recruitment, and only three evaluations provided a description of which marginalized groups were recruited. Challenges related to recruitment consist of difficulties involving the target group, including general distrust, language barriers and a lack of ability...

  11. Model-Based Systems Engineering Approach to Managing Mass Margin

    Science.gov (United States)

    Chung, Seung H.; Bayer, Todd J.; Cole, Bjorn; Cooke, Brian; Dekens, Frank; Delp, Christopher; Lam, Doris

    2012-01-01

    When designing a flight system from concept through implementation, one of the fundamental systems engineering tasks ismanaging the mass margin and a mass equipment list (MEL) of the flight system. While generating a MEL and computing a mass margin is conceptually a trivial task, maintaining consistent and correct MELs and mass margins can be challenging due to the current practices of maintaining duplicate information in various forms, such as diagrams and tables, and in various media, such as files and emails. We have overcome this challenge through a model-based systems engineering (MBSE) approach within which we allow only a single-source-of-truth. In this paper we describe the modeling patternsused to capture the single-source-of-truth and the views that have been developed for the Europa Habitability Mission (EHM) project, a mission concept study, at the Jet Propulsion Laboratory (JPL).

  12. Jatropha potential on marginal land in Ethiopia

    DEFF Research Database (Denmark)

    Wendimu, Mengistu Assefa

    narrative. But both the availability and suitability of “marginal” land for commercial level jatropha production is not well understood/examined, especially in Africa. Using a case study of large-scale jatropha plantation in Ethiopia, this paper examines the process of land identification for jatropha....... The increasing trend of land acquisition for biofuels has led to the widespread debate about food versus biofuel because of the perceived competition for land and water. To avoid the food versus fuel debate, the use of “marginal” land for biofuel feedstock production (jatropha) has emerged as a dominant...... investments, and the agronomic performance of large-scale jatropha plantation on so-called marginal land. Although it has been argued that jatropha can be grown well on marginal land without irrigation, and thus does not compete for land and water or displace food production from agricultural land, this study...

  13. Marginal and internal fit of heat pressed versus CAD/CAM fabricated all-ceramic onlays after exposure to thermo-mechanical fatigue

    Science.gov (United States)

    Guess, Petra C.; Vagopoulou, Thaleia; Zhang, Yu; Wolkewitz, Martin; Strub, Joerg R.

    2015-01-01

    Objectives The aim of the study was to evaluate the marginal and internal fit of heat-pressed and CAD/CAM fabricated all-ceramic onlays before and after luting as well as after thermo-mechanical fatigue. Materials and Methods Seventy-two caries-free, extracted human mandibular molars were randomly divided into three groups (n=24/group). All teeth received an onlay preparation with a mesio-occlusal-distal inlay cavity and an occlusal reduction of all cusps. Teeth were restored with heat-pressed IPS-e.max-Press* (IP, *Ivoclar-Vivadent) and Vita-PM9 (VP, Vita-Zahnfabrik) as well as CAD/CAM fabricated IPS-e.max-CAD* (IC, Cerec 3D/InLab/Sirona) all-ceramic materials. After cementation with a dual-polymerizing resin cement (VariolinkII*), all restorations were subjected to mouth-motion fatigue (98N, 1.2 million cycles; 5°C/55°C). Marginal fit discrepancies were examined on epoxy replicas before and after luting as well as after fatigue at 200x magnification. Internal fit was evaluated by multiple sectioning technique. For the statistical analysis, a linear model was fitted with accounting for repeated measurements. Results Adhesive cementation of onlays resulted in significantly increased marginal gap values in all groups, whereas thermo-mechanical fatigue had no effect. Marginal gap values of all test groups were equal after fatigue exposure. Internal discrepancies of CAD/CAM fabricated restorations were significantly higher than both press manufactured onlays. Conclusions Mean marginal gap values of the investigated onlays before and after luting as well as after fatigue were within the clinically acceptable range. Marginal fit was not affected by the investigated heat-press versus CAD/CAM fabrication technique. Press fabrication resulted in a superior internal fit of onlays as compared to the CAD/CAM technique. Clinical Relevance Clinical requirements of 100 μm for marginal fit were fulfilled by the heat-press as well as by the CAD/CAM fabricated all-ceramic onlays

  14. SOFC anode reduction studied by in situ TEM

    DEFF Research Database (Denmark)

    Simonsen, Søren Bredmose; Wagner, Jakob Birkedal; Hansen, Thomas Willum

    The Solid Oxide Fuel Cell (SOFC) is a promising part of future energy approaches due to a relatively high energy conversion efficiency and low environmental pollution. SOFCs are typically composed of ceramic materials which are highly complex at the nanoscale. TEM is routinely applied ex situ...... for studying these nanoscale structures, but only few SOFC studies have applied in situ TEM to observe the ceramic nanostructures in a reactive gas environment at elevated temperatures. The present contribution focuses on the reduction of an SOFC anode which is a necessary process to form the catalytically...... active Ni surface before operating the fuel cells. The reduction process was followed in the TEM while exposing a NiO/YSZ (YSZ = Y2O3-stabilized ZrO2) model anode to H2 at T = 250-1000⁰C. Pure NiO was used in reference experiments. Previous studies have shown that the reduction of pure Ni...

  15. Impact of Close and Positive Margins in Transoral Laser Microsurgery for Tis-T2 Glottic Cancer.

    Science.gov (United States)

    Fiz, Ivana; Mazzola, Francesco; Fiz, Francesco; Marchi, Filippo; Filauro, Marta; Paderno, Alberto; Parrinello, Giampiero; Piazza, Cesare; Peretti, Giorgio

    2017-01-01

    Transoral laser microsurgery (TLM) represents one of the most effective treatment strategies for Tis-T2 glottic squamous cell carcinomas (SCC). The prognostic influence of close/positive margins is still debated, and the role of narrow band imaging (NBI) in their intraoperative definition is still to be validated on large cohort of patients. This study analyzed the influence of margin status on recurrence-free survival (RFS) and disease-specific survival (DSS). We retrospectively studied 507 cases of pTis-T1b (Group A) and 127 cases of pT2 (Group B) glottic SCC. We identified the following margin status: negative ( n  = 232), close superficial ( n  = 79), close deep (CD) ( n  = 35), positive single superficial ( n  = 146), positive multiple superficial ( n  = 94), and positive deep ( n  = 48) and analyzed their impact on RFS and DSS. Close margins were defined by tumor-margin distance <1 mm. Pre-TLM margins were defined by white light in 323 patients, whereas NBI was employed in 311 patients. In Group A, DSS and RFS were reduced in positive multiple superficial and positive deep margins (DSS = 96.1 and 97%, both p  < 0.05; RFS = 72%, p  < 0.001 and 75.8%, p  < 0.01). In Group B, DSS was reduced in positive multiple superficial margins (82.4%, p  < 0.05). RFS was reduced in positive single superficial, positive multiple superficial, and positive deep margins (62.5, 41.2, and 53.3%, p  < 0.01). In the entire population, RFS was reduced in CD margins (77.1%, p  < 0.05). Use of NBI led to improvement in RFS and DSS. The study indicates that close and positive single superficial margins do not affect DSS. By contrast, all types of margin positivity predict the occurrence of relapses, albeit with different likelihood, depending on stage/margin type. CD margins should be considered as a single risk factor. Use of NBI granted better intraoperative margins definition.

  16. The Seismicity of Two Hyperextended Margins

    Science.gov (United States)

    Redfield, Tim; Terje Osmundsen, Per

    2013-04-01

    A seismic belt marks the outermost edge of Scandinavia's proximal margin, inboard of and roughly parallel to the Taper Break. A similar near- to onshore seismic belt runs along its inner edge, roughly parallel to and outboard of the asymmetric, seaward-facing escarpment. The belts converge at both the northern and southern ends of Scandinavia, where crustal taper is sharp and the proximal margin is narrow. Very few seismic events have been recorded on the intervening, gently-tapering Trøndelag Platform. Norway's distribution of seismicity is systematically ordered with respect to 1) the structural templates of high-beta extension that shaped the thinning gradient during Late Jurassic or Early Cretaceous time, and 2) the topographically resurgent Cretaceous-Cenozoic "accommodation phase" family of escarpments that approximate the innermost limit of crustal thinning [See Redfield and Osmundsen (2012) for diagrams, definitions, discussion, and supporting citations.] Landwards from the belt of earthquake epicenters that mark the Taper Break the crust consistently thickens, and large fault arrays tend to sole out at mid crustal levels. Towards the sea the crystalline continental crust is hyperextended, pervasively faulted, and generally very thin. Also, faulting and serpentinization may have affected the uppermost parts of the distal margin's lithospheric mantle. Such contrasting structural conditions may generate a contrasting stiffness: for a given stress, more strain can be accommodated in the distal margin than in the less faulted proximal margin. By way of comparison, inboard of the Taper Break on the gently-tapered Trøndelag Platform, faulting was not penetrative. There, similar structural conditions prevail and proximal margin seismicity is negligible. Because stress concentration can occur where material properties undergo significant contrast, the necking zone may constitute a natural localization point for post-thinning phase earthquakes. In Scandinavia

  17. The Marginal Source of Finance

    OpenAIRE

    Lindhe, Tobias

    2002-01-01

    This paper addresses the ongoingdebate on which view of equity, traditional or new, that best describes firm behavior. According to the traditional view, the marginal source of finance is new equity, whereas under to the new view, marginal financing comes from retained earnings. In the theoretical part, we set up a model where the firm faces a cost of adjusting the dividend level because of an aggravated free cash flow problem. The existence of such a cost - which has been used in arguing the...

  18. Study of transient burnout characteristics under flow reduction condition

    International Nuclear Information System (INIS)

    Iwamura, Takamichi; Kuroyanagi, Toshiyuki

    1984-03-01

    As part of a study of the thermal behavior of fuel rods during Power-Cooling-Mismatch (PCM) accidents in light water reactors, burnout characteristics in a uniformly heated, vertically oriented tube or annulus, under flow reduction condition, were experimentally studied. Test pressures ranged 0.1--3.9 MPa and flow reduction rates 0.44--1100%/s. An analytical method is developed to obtain the local mass velocity during a transient condition. The major results are as follows: With increasing flow reduction rate beyond a threshold, transient burnout mass velocity at the inlet was lower than that in steady state tests under the experimental pressures. The higher system pressure resulted in the less transient effects. At pressures higher than 2.0 MPa and flow reduction rates lower than 20%/s, the local burnout mass velocity agreed with the steady state burnout mass velocity, whereas the local burnout mass velocity became higher than the steady state burnout mass velocity at flow reduction rates higher than 20%/s. At pressures lower than 1 MPa, with increasing flow reduction rate beyond the threshold value of 2%/s, the local burnout mass velocity was lower than the steady state burnout mass velocity. An empirical correlation is presented to give the ratio of the transient to the steady state burnout mass velocities at the burnout location as a function of the steam-water density ratio and the flow reduction rate. The experimental results by Cumo et al. agree with the correlation. The correlation, however, cannot predict the experimental results at higher flow reduction rates beyond 40%/s. (author)

  19. Digital microscopic evaluation of vertical marginal discrepancies of CAD/CAM fabricated zirconia cores.

    Science.gov (United States)

    Habib, Syed Rashid

    2018-05-18

    The aim of this in vitro research study was to evaluate the vertical marginal discrepancies of zirconia (Zr) cores fabricated by five different computer-aided design and manufacturing (CAD/CAM) systems using a digital microscope. A total of 60 specimens were prepared and randomly divided into five groups (n=12 each) using the following systems: Ceramill Motion 2 (CM, Amanngirrbach, Germany); Weiland (WI, Ivoclar Vivadent, USA); Cerec (CS, Sirona Dental, USA); Zirkonzahn (ZZ, Gmbh Bruneck, Italy) and Cad4dent (CD, Canada). The specimens were numbered and the vertical marginal discrepancies were evaluated with a digital microscope at 50× magnification. A one-way analysis of variance showed a statistically significant difference (p=0.002) between the groups. The CM group exhibited the lowest values for the marginal gaps (31.30±15.12 μm), while the ZZ group exhibited the highest values for the marginal gaps (44.83±28.76 μm) compared to other groups. A post hoc Tukey's test for multiple comparisons between the experimental groups showed a statistically significant difference (p<0.05) between the group CM and group CD with group ZZ. The rest of the groups showed no significant differences between them. Variations in the values were observed for the four sites measured with the highest and the least mean marginal gap value of 43.19±23.84 μm and 32.49±12.21 μm for buccal and lingual sites, respectively. Variations existed in the marginal discrepancy values for the CAD/CAM systems investigated in the study. Vertical marginal discrepancy values observed for various systems investigated in the study were well within the clinically acceptable range.

  20. Hepatocellular carcinoma with marginal superparamagnetic iron oxide uptake on T2*-weighted magnetic resonance imaging: Histopathologic correlation

    International Nuclear Information System (INIS)

    Ishigami, Kousei; Tajima, Tsuyoshi; Fujita, Nobuhiro; Nishie, Akihiro; Asayama, Yoshiki; Kakihara, Daisuke; Nakayama, Tomohiro; Okamoto, Daisuke; Taketomi, Akinobu; Shirabe, Ken; Honda, Hiroshi

    2011-01-01

    Purpose: To evaluate the characteristics of hepatocellular carcinomas (HCCs) with marginal superparamagnetic iron oxide (SPIO) uptake on T2*-weighted MRI. Materials and methods: The study group consisted of 73 patients with 83 surgically resected HCCs. Preoperative SPIO-enhanced MRI studies were retrospectively reviewed. Marginal SPIO uptake was considered positive if a rim-like or band-like low intensity area was present on SPIO-enhanced T2*-weighted images. The prevalence of marginal SPIO uptake was evaluated. Pathological specimens with hematoxylin and eosin staining and immunohistochemical staining of CD68 were reviewed in HCCs with marginal SPIO uptake and 33 HCCs without marginal SPIO uptake (control group). Results: Ten of 83 (12%) HCCs showed marginal SPIO uptake. All HCCs were hypervascular, and only one nodule showed a nodule-in-nodule appearance on imaging findings. The pathology specimens suggested possible causes of marginal SPIO uptake, including marginal macrophage infiltration in moderately or poorly differentiated HCC (n = 4), residual normal hepatic tissue at the marginal area of confluent multinodular or single nodular with extranodular growth type HCC (n = 3), and a well-differentiated HCC component in nodule-in-nodule type HCC (n = 3). Marginal macrophage infiltration was not seen in the control group. Conclusion: SPIO-enhanced MRI may be able to demonstrate marginal macrophage infiltration in HCC.

  1. Stability of alert survivable forces during reductions

    Energy Technology Data Exchange (ETDEWEB)

    Canavan, G.H.

    1998-01-01

    The stability of current and projected strategic forces are discussed within a framework that contains elements of current US and Russian analyses. For current force levels and high alert, stability levels are high, as are the levels of potential strikes, due to the large forces deployed. As force levels drop towards those of current value target sets, the analysis becomes linear, concern shifts from stability to reconstitution, and survivable forces drop out. Adverse marginal costs generally provide disincentives for the reduction of vulnerable weapons, but the exchange of vulnerable for survivable weapons could reduce cost while increasing stability even for aggressive participants. Exchanges between effective vulnerable and survivable missile forces are studied with an aggregated, probabilistic model, which optimizes each sides` first and determines each sides` second strikes and costs by minimizing first strike costs.

  2. Deformation patterns and seismic hazard along the eastern Sunda margin

    Science.gov (United States)

    Kopp, Heidrun; Djajadihardja, Yusuf; Flueh, Ernst R.; Hindle, David; Klaeschen, Dirk; Mueller, Christian; Planert, Lars; Reichert, Christian; Shulgin, Alexey; Wittwer, Andreas

    2010-05-01

    The eastern Sunda margin offshore Java, Bali, Lombok and Sumba is the site of oceanic subduction of the Indo-Australian plate underneath the Indonesian archipelago. Data from a suite of geophysical experiments conducted between 1997-2006 using RV SONNE as platform include seismic and seismological studies, potential field measurements and high-resolution seafloor bathymetry mapping. Tomographic inversions provide an image of the ongoing deformation of the forearc and the deep subsurface. We investigate the role of various key mechanisms that shape the first-order features characterizing the present margin architecture. Our contribution evaluates the differences in architecture and evolution along the Java forearc from a marine perspective to better understand the variation in tectonic styles and segmentation of the convergent margin, including its seismic risk potential.

  3. Pathologic margin involvement and the risk of recurrence in patients treated with breast-conserving therapy

    International Nuclear Information System (INIS)

    Gage, Irene; Nixon, Asa J.; Schnitt, Stuart J.; Recht, Abram; Gelman, Rebecca; Silver, Barbara; Connolly, James L.; Harris, Jay R.

    1995-01-01

    PURPOSE: To assess the relationship between microscopic margin status and recurrence after breast-conserving therapy for tumors with or without an extensive intraductal component (EIC). MATERIALS AND METHODS: During the years 1968 to 1986, 1865 women with unilateral clinical stage I or II breast cancer were treated with radiation therapy for breast conservation. Of these, 340 received ≥60 Gy to the tumor bed and had margins that were evaluable on review of their pathologic slides; these constitute the study population. The median follow-up was 109 months. All available slides were reviewed by one of the study pathologists (SS, JC). Final radial margins of excision were classified as negative >1 mm (no invasive or ductal carcinoma in-situ within 1 mm of the inked margin), negative ≤1 mm (any carcinoma ≤1 mm of the inked margin but not at ink) or positive (any carcinoma at the inked margin). A focally positive margin was defined as any invasive or in-situ carcinoma at the margin in ≤3 LPF. The extent of positivity was not evaluable in 2 patients and the distance of the tumor from the margin was not evaluable in 48 patients with a negative margin. Thirty-nine percent of EIC-negative and 46% of EIC-positive patients underwent a re-excision and, for these, the final margin analyzed was from the re-excised specimen. The median dose to the tumor bed was 63 Gy for patients with positive margins and 62 Gy for patients with negative margins. Recurrent disease was classified as ipsilateral breast recurrence (IBR) or distant metastasis/regional nodal failure (DM/RNF). RESULTS: Five year crude rates for the first site of recurrence were calculated for 340 patients evaluable at 5 years. Results were tabulated separately for all patients, EIC-negative and EIC-positive. All p-values tested for differences in the distribution of sites of first failure. CONCLUSIONS: The risk of ipsilateral breast recurrence is equally low for patients with close (≤1 mm) or negative (>1 mm

  4. The Magmatic Budget of Rifted Margins: is it Related to Inheritance?

    Science.gov (United States)

    Manatschal, G.; Tugend, J.; Gillard, M.; Sauter, D.

    2017-12-01

    High quality reflection and refraction seismic surveys show a divergent style of margin architecture often referred to as magma-poor or magma-rich. More detailed studies show, however, that the evolution of these margins can be similar, despite the variable quantity and distribution of magmatism. These observations suggest that simple relations between magmatic and extensional systems are inappropriate to describe the magmatic history of rifted margins. Moreover, the study of magmatic additions indicates that they may occur, prior to, during or after lithospheric breakup. Furthermore, the observation that the magmatic budget may change very abruptly along strike and across the margin is difficult to reconcile with the occurrence of plumes or other deep-seated large-scale mantle phenomena only. These overall observations result in questions on how magmatic and tectonic processes are interacting during rifting and lithospheric breakup and on how far the inherited composition and temperature of the decompressing mantle may control the magmatic budget during rifting. In our presentation we will review examples from present-day and fossil rifted margins to discuss their structural and magmatic evolution and whether they are considered as magma-rich or magma-poor. The key questions that we aim to address are: 1) whether decompression melting is the driving force, or rather the consequence of extension, 2) how far the magmatic budget is controlled by inherited mantle composition and temperature, and 3) how important magma storage is during initial stages of rifting. Eventually, we will discuss to what extent the evolution of margins may reflect the interplay between inheritance (innate/"genetic code") and the actual physical processes (acquired/external factors).

  5. On probabilistically defined margins in radiation therapy

    Energy Technology Data Exchange (ETDEWEB)

    Papiez, Lech; Langer, Mark [Department of Radiation Oncology, Indiana University, Indianapolis, IN (United States)

    2006-08-21

    Margins about a target volume subject to external beam radiation therapy are designed to assure that the target volume of tissue to be sterilized by treatment is adequately covered by a lethal dose. Thus, margins are meant to guarantee that all potential variation in tumour position relative to beams allows the tumour to stay within the margin. Variation in tumour position can be broken into two types of dislocations, reducible and irreducible. Reducible variations in tumour position are those that can be accommodated with the use of modern image-guided techniques that derive parameters for compensating motions of patient bodies and/or motions of beams relative to patient bodies. Irreducible variations in tumour position are those random dislocations of a target that are related to errors intrinsic in the design and performance limitations of the software and hardware, as well as limitations of human perception and decision making. Thus, margins in the era of image-guided treatments will need to accommodate only random errors residual in patient setup accuracy (after image-guided setup corrections) and in the accuracy of systems designed to track moving and deforming tissues of the targeted regions of the patient's body. Therefore, construction of these margins will have to be based on purely statistical data. The characteristics of these data have to be determined through the central limit theorem and Gaussian properties of limiting error distributions. In this paper, we show how statistically determined margins are to be designed in the general case of correlated distributions of position errors in three-dimensional space. In particular, we show how the minimal margins for a given level of statistical confidence are found. Then, how they are to be used to determine geometrically minimal PTV that provides coverage of GTV at the assumed level of statistical confidence. Our results generalize earlier recommendations for statistical, central limit theorem

  6. On probabilistically defined margins in radiation therapy

    International Nuclear Information System (INIS)

    Papiez, Lech; Langer, Mark

    2006-01-01

    Margins about a target volume subject to external beam radiation therapy are designed to assure that the target volume of tissue to be sterilized by treatment is adequately covered by a lethal dose. Thus, margins are meant to guarantee that all potential variation in tumour position relative to beams allows the tumour to stay within the margin. Variation in tumour position can be broken into two types of dislocations, reducible and irreducible. Reducible variations in tumour position are those that can be accommodated with the use of modern image-guided techniques that derive parameters for compensating motions of patient bodies and/or motions of beams relative to patient bodies. Irreducible variations in tumour position are those random dislocations of a target that are related to errors intrinsic in the design and performance limitations of the software and hardware, as well as limitations of human perception and decision making. Thus, margins in the era of image-guided treatments will need to accommodate only random errors residual in patient setup accuracy (after image-guided setup corrections) and in the accuracy of systems designed to track moving and deforming tissues of the targeted regions of the patient's body. Therefore, construction of these margins will have to be based on purely statistical data. The characteristics of these data have to be determined through the central limit theorem and Gaussian properties of limiting error distributions. In this paper, we show how statistically determined margins are to be designed in the general case of correlated distributions of position errors in three-dimensional space. In particular, we show how the minimal margins for a given level of statistical confidence are found. Then, how they are to be used to determine geometrically minimal PTV that provides coverage of GTV at the assumed level of statistical confidence. Our results generalize earlier recommendations for statistical, central limit theorem

  7. Comparative Evaluation of Conventional and Accelerated Castings on Marginal Fit and Surface Roughness

    Science.gov (United States)

    Jadhav, Vivek Dattatray; Motwani, Bhagwan K.; Shinde, Jitendra; Adhapure, Prasad

    2017-01-01

    Aims: The aim of this study was to evaluate the marginal fit and surface roughness of complete cast crowns made by a conventional and an accelerated casting technique. Settings and Design: This study was divided into three parts. In Part I, the marginal fit of full metal crowns made by both casting techniques in the vertical direction was checked, in Part II, the fit of sectional metal crowns in the horizontal direction made by both casting techniques was checked, and in Part III, the surface roughness of disc-shaped metal plate specimens made by both casting techniques was checked. Materials and Methods: A conventional technique was compared with an accelerated technique. In Part I of the study, the marginal fit of the full metal crowns as well as in Part II, the horizontal fit of sectional metal crowns made by both casting techniques was determined, and in Part III, the surface roughness of castings made with the same techniques was compared. Statistical Analysis Used: The results of the t-test and independent sample test do not indicate statistically significant differences in the marginal discrepancy detected between the two casting techniques. Results: For the marginal discrepancy and surface roughness, crowns fabricated with the accelerated technique were significantly different from those fabricated with the conventional technique. Conclusions: Accelerated casting technique showed quite satisfactory results, but the conventional technique was superior in terms of marginal fit and surface roughness. PMID:29042726

  8. City and sea margins. Porto’s Marginal as scale and measure of new spaces

    Directory of Open Access Journals (Sweden)

    Giuseppe Parità

    2014-06-01

    Full Text Available The city has always been confronting with its own end and the beginning of the water system. Among the different kind of margin areas, the ones that border the cities on their watersides are particularly interesting. These new liminal territories are rich in variety and differences and are set up of several elements made of different morphologies that should be carefully read and interpreted: the need of re-thinking the morphological elements that mark an urban edge leads to the identification of several shapes and forms of the water borderlands. Borders, limits, boundaries, edges, margin areas - usually considered as an obstacle to the construction of the city - turn themselves as new possible “design materials” for building that ambiguous distance between city and the sea. The article aims to focus on the case-study of Porto’s Marginal that well explain how many ways a city can live its water edges. On a large scale, it is configured as a strip of 15 kilometers of public space. Within this continuity, the different extent of the distance between city and water leads to reflect on the different types of relationships (and therefore projects between the end of one side and the beginning of another. For Porto, those are not only urban parts, but also different geographical parts (sea, rivers, topography that distance puts in relation through the design sometimes of the line, at time of the border or of a surface. So, the analysis of these heterogeneous but continuous projects aim to focus on the several techniques of urban composition to build contemporary public spaces. On one hand they give form to a continuous “public figure”, on the other hand each one of the project can be considered as part of a “atlas” of liminal places, giving form to public spaces. 

  9. Geomorphic response of a continental margin to tectonic and eustatic variations, the Levant margin during the Messinian Salinity Crisis

    Science.gov (United States)

    Ben Moshe, Liran; Ben-Avraham, Zvi; Enzel, Yehouda; Uri, Schattner

    2017-04-01

    During the Messinian Salinity Crisis (MSC, 5.97±0.01-5.33 Ma) the Mediterranean Levant margin experienced major eustatic and sedimentary cycles as well as tectonic motion along the nearby Dead Sea fault plate boundary. New structures formed along this margin with morphology responding to these changes. Our study focuses on changes in this morphology across the margin. It is based on interpretation of three 3D seismic reflection volumes from offshore Israel. Multi-attribute analysis aided the extraction of key reflectors. Morphologic analysis of these data quantified interacting eustasy, sedimentation, and tectonics. Late Messinian morphologic domains include: (a) continental shelf; (b) 'Delta' anticline, forming a ridge diagonal to the strike of the margin; (c) southward dipping 'Hadera' valley, separating between (a) and (b); (d) 'Delta Gap' - a water gap crossing perpendicular to the anticline axis, exhibiting a sinuous thalweg; (e) continental slope. Drainage across the margin developed in several stages. Remains of turbidite flows crossing the margin down-slope were spotted across the 'Delta' anticline. These flows accumulated with the MSC evaporate sequence and prior to the anticline folding. Rising of the anticline, above the then bathymetry, either blocked or diverted the turbidites. That rising also defined the Hadera valley. In-situ evaporates, covering the valley floor, are, in turn covered by a fan-delta at the distal end of the valley. The fan-delta complex contains eroded evaporites and Lago-Mare fauna. Its top is truncated by dendritic fluvial channels that drained towards the Delta Gap. The Delta Gap was carved through the Delta ridge in a morphological and structural transition zone. We propose that during the first stages of the MSC (5.97±0.01-5.59 ma) destabilization of the continental slope due to oscillating sea level produced gravity currents that flowed through the pre-existing Delta anticline. Subsequent folding of the Delta anticline

  10. Meeting the expectations of your heritage culture: Links between attachment orientations, intragroup marginalization and psychological adjustment.

    Science.gov (United States)

    Ferenczi, Nelli; Marshall, Tara C

    2016-02-01

    Do insecurely attached individuals perceive greater rejection from their heritage culture? Few studies have examined the antecedents and outcomes of this perceived rejection - termed intragroup marginalization - in spite of its implications for the adjustment of cultural migrants to the mainstream culture. This study investigated whether anxious and avoidant attachment orientations among cultural migrants were associated with greater intragroup marginalization and, in turn, with lower subjective well-being and flourishing and higher acculturative stress. Anxious attachment was associated with heightened intragroup marginalization from friends and, in turn, with increased acculturative stress; anxious attachment was also associated with increased intragroup marginalization from family. Avoidant attachment was linked with increased intragroup marginalization from family and, in turn, with decreased subjective well-being.

  11. Cyclic voltammetry and reduction mechanistic studies of styrylpyrylium perchlorates

    Directory of Open Access Journals (Sweden)

    Y. L. Bonzi-Coulibaly

    2013-04-01

    Full Text Available The reduction and oxidation potentials of methylated 4-styrylpyrylium and 6-styrylpyrylium perchlorates have been evaluated using cyclic voltammetry, in comparison to their non-methylated derivatives values. The reduction peak of all studied compounds remained chemically irreversible. The presence of the electron-donating methyl group on pyrylium ring leads to a shift of the styrylpyrylium perchlorates reduction potential towards cathodic values. Kinetic studies on platinum electrodes based on the variation of the peak potential at different scan rates and upon substrate concentrations confirm, in another way, the mechanism of electron transfer.DOI: http://dx.doi.org/10.4314/bcse.v27i1.12

  12. Ocean Margin EXchange II database from the upwelling region of the narrow Iberian margin from 1997 to 2000 (NODC Accession 0000560)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Ocean Margin EXchange (OMEX) II aims at studying, measuring and modeling the processes and fluxes occurring along and across the European shelf break facing the...

  13. Economics of plant production on marginal sites in the state Mecklenburg-Vorpommern

    Science.gov (United States)

    Ziesemer, Andrea; Andreas, Gurgel; Ines, Bull

    2017-04-01

    Marginal sites are defined by economics. It is not possible to produce any profit there under given conditions of markets and policy even when management is optimized. In the state Mecklenburg-Vorpommern, a portion of nearly 20 % of arable land is characterized by such conditions. There are often to find sandy sites below 28 soil points with low storage capacity and irregular water supply. Animal husbandry as a type of agricultural upgrading has a more important role in the south and southwest of the state than in the regions with better soil quality. The percentage of Maize was already in 2003 twice as high in the regions with more marginal sites. After implementation of the Renewable Energy Act many enterprises started built biogas plants. In 2010, the portion of maize was raised to 20 %. The increase of Maize was combined with a reduction of growing other fodder crops, rye and also by reducing set-aside areas. The scale of the cash crops Rape (16%), Wheat (15 %) and barley (9 %) stayed the same. The yields and production processes of several selected farms in Mecklenburg-Vorpommern were analyzed for the years 2011 to 2016. The farms reached 6.6 tons per hectare of wheat and 6.1 tons per hectare of barley on soils below 28 soil points. Hybrid rye achieved 5.4 tons per hectare and rape 3.0. Maize was especially dependent on water supply and made between 30 and 35 tons per hectare. The big problem in these regions is caused by high production costs in cropping. More than a half of the costs is required for seeds, fertilization and crop protection. However, the remaining revenues are not adequate for paying work and fix costs as an evaluation of farms in Mecklenburg-Vorpommern shows. It is not a valid option to set more land that is arable aside in regions with much marginal sites because cropping is a strategic investment there. Therefore, it is important to make effort on crop rotations and optimization of production intensities to decrease costs per unit and to

  14. Influence of artificial aging in marginal adaptation of mixed class V cavities.

    Science.gov (United States)

    Tonetto, Mateus Rodrigues; Bandéca, Matheus Coelho; Barud, Hélida Gomes de Oliveira; Pinto, Shelon Cristina Souza; Lima, Darlon Martins; Borges, Alvaro Henrique; de Campos, Edson Alves; de Andrade, Marcelo Ferrarezi

    2013-03-01

    The aim of this study was to investigate whether the artificial aging by thermal cycling had influenced the marginal adaptation of class V restorations with/without chlorhexidine application in the bond process. Twelve intact human third molars were used. Class V cavity preparations were performed on the buccal surface and the teeth received 35% phosphoric acid-etching procedure (Ultradent Products Inc., South Jordan, Utah, USA). Subsequently, the samples were divided in two groups: Untreated acid-etched dentin and chlorhexidine application as an adjunct in the bond process. The adhesive Single Bond 2 (3M ESPE, St. Paul, MN, USA) was used after 2% chlorhexidine application, and the restorations were performed with Filtek™ Z350 XT (3M ESPE) composite resin. The specimens were submitted to artificial aging by thermal cycling with 3,000 cycles. Analyzes were performed on scanning electron microscopy using replicas of marginal adaptation in percentage of continuous margin before and after the artificial aging. The data were analyzed by paired test and the results showed statistically significant differences in the percentage of continuous margin with/without chlorhexidine treatment before and after thermal cycling. This study concluded that the artificial aging by thermal cycling influenced the marginal adaptation of mixed class V composite restorations.

  15. Comparison of hydrothermal activity between the Adriatic and the Red Sea rift margins

    Science.gov (United States)

    Ball, Philip; Incerpi, Nicolò; Birkle, Peter; Lacsamana, Elizabeth; Manatschal, Gianreto; Agar, Susan; Zhang, Shuo; Borsato, Ron

    2017-04-01

    Detailed field studies, and access to high-quality seismic reflection and refraction data have led to an improved understanding of the architecture and evolution of magma poor and magma rich margins. Associated with the spatial-temporal evolution of the rift, it is evident that there are evolving, extensive, fluid-rock interactions due to the infiltration of fluids within the sediment, basement and lithospheric mantle. Key questions therefore arise: What are the different fluid-rock reactions that can be typed to different geodynamic stages of the rift evolution? What are their compositions and how do they interact with their environment (basement, sediments, evaporites, hydrosphere, and magmatism)? What are the implications for the evolution of the margin rheology, thermal structure, depositional environments/organic matter maturity, and reservoir quality? The Adriatic paleo-rifted margin is preserved in both SE Switzerland and northern Italy. The field exposures provide a unique opportunity to study the fluid flow history of a hyperextended magma poor extensional margin. Analysis of breccias, cement veins and replacement minerals reveal that the margin records a complex, long-lasting history of dolomitization, calcification and silicification during the Jurassic rifting. The Red Sea by contrast is a young rifted margin. It differs from the paleo-Adriatic margin by several characteristics: volcanism is more evident, and syn-tectonic sediments, including evaporites (halite and anhydrite) are thicker. Several core and fluid samples are available from both onshore and offshore wells, which reveal rift-related hydrothermal alteration. In addition, we find evidence for the presence of an extreme dynamic hydraulic system with infiltration of surface water into sub-salt units during Late Pleistocene. In this study we present results from petrographic and geochemical analysis of basement and sedimentary rocks from Adriatic field-derived samples and core/subsurface fluid

  16. Planning target volumes for radiotherapy: how much margin is needed?

    International Nuclear Information System (INIS)

    Antolak, John A.; Rosen, Isaac I.

    1999-01-01

    Purpose: The radiotherapy planning target volume (PTV) encloses the clinical target volume (CTV) with anisotropic margins to account for possible uncertainties in beam alignment, patient positioning, organ motion, and organ deformation. Ideally, the CTV-PTV margin should be determined solely by the magnitudes of the uncertainties involved. In practice, the clinician usually also considers doses to abutting healthy tissues when deciding on the size of the CTV-PTV margin. This study calculates the ideal size of the CTV-PTV margin when only physical position uncertainties are considered. Methods and Materials: The position of the CTV for any treatment is assumed to be described by independent Gaussian distributions in each of the three Cartesian directions. Three strategies for choosing a CTV-PTV margin are analyzed. The CTV-PTV margin can be based on: 1. the probability that the CTV is completely enclosed by the PTV; 2. the probability that the projection of the CTV in the beam's eye view (BEV) is completely enclosed by the projection of the PTV in the BEV; and 3. the probability that a point on the edge of the CTV is within the PTV. Cumulative probability distributions are derived for each of the above strategies. Results: Expansion of the CTV by 1 standard deviation (SD) in each direction results in the CTV being entirely enclosed within the PTV 24% of the time; the BEV projection of the CTV is enclosed within the BEV projection of the PTV 39% of the time; and a point on the edge of the CTV is within the PTV 84% of the time. To have the CTV enclosed entirely within the PTV 95% of the time requires a margin of 2.8 SD. For the BEV projection of the CTV to be within the BEV projection of the PTV 95% of the time requires a margin of 2.45 SD. To have any point on the surface of the CTV be within the PTV 95% of the time requires a margin of 1.65 SD. Conclusion: In the first two strategies for selecting a margin, the probability of finding the CTV within the PTV is

  17. Preparation of rare earth-cobalt magnet alloy by reduction-diffusion process

    International Nuclear Information System (INIS)

    Krishnan, T.S.

    1980-01-01

    Preparation of rare earth-cobalt alloys by reduction-diffusion (R-D) process is described. The process essentially involves mixing of the rare earth oxide and cobalt/cobalt oxide powders in proper proportion and high temperature reduction of the charge in hydrogen atmosphere, followed by aqueous leaching of the reduced mass to yield the alloy powder. Comparison is made of the magnetic properties of the R-D powder with those of the powder prepared by the direct melting (DM) route and it is observed from the reported values for SmCo 5 that the energy product of the R-D powder (approximately 22 MGOe) is only marginally lower than that of the directly melted alloy (approximately 25 MGOe). The paper also includes the results of studies carried out at the Bhabha Atomic Research Centre, Bombay, on the preparation of misch metal-cobalt alloy by the R-D process. (auth.)

  18. The Role of Field Margins in Agro-biodiversity Management at the Farm Level

    Directory of Open Access Journals (Sweden)

    Giulio Lazzerini

    2007-06-01

    Full Text Available The agroecosystem could be considered as a mosaic so large to involve fields with annual and perennial crops, pastures, spots of wildwood, semi-natural habitats, vegetation in the edges of fields. In the agroecosystem these ecological infrastructures have a positive effects on the crops because of the exchange among community of organisms, materials and energy. The aim of this research is to evaluate the effects of field margins on some biodiversity components (plant species and carabid beetles of four farms located in Val d’Orcia (Tuscany. We compared three types of field margins: 1. Cultivated margin strips; 2. Sown grass margin strips; 3. Wild margin strips with hedgerow. In a very simplified typology of farming system, like the one studied (Val d’Orcia, the presence of field margins (hedges, margin strips and semi-natural habitats associated with the boundary is very important for its ecological effects: it improves the planned biodiversity, gives habitat, refuge, food and corridors for the movement to the different species of organisms in the area. Applying the multivariate analysis to the experimental data, we can notice a positive effect of the presence of field margins on the trend of both components of biodiversity. This positive effect, which support the mechanisms of autoregulation of the agroecosystems, is very important especially for organic and biodynamic agriculture, where the use of pesticides is not allowed.

  19. Evaluation of reactivity shutdown margin for nuclear fuel reload optimization

    International Nuclear Information System (INIS)

    Wong, Hing-Ip; Maldonado, G.I.

    1995-01-01

    The FORMOSA-P code is a nuclear fuel management optimization package that combines simulated annealing (SA) and nodal generalized perturbation theory (GPT). Recent studies at Electricite de France (EdF-Clamart) have produced good results for power-peaking minimizations under multiple limiting control rod configurations. However, since the reactivity shutdown margin is not explicitly treated as an objective or constraint function, then any optimal loading patterns (LPs) are not guaranteed to yield an adequate shutdown margin (SDM). This study describes the implementation of the SDM calculation within a FORMOSA-P optimization. Maintaining all additional computational requirements to a minimum was a key consideration

  20. Cyclic voltammetry and reduction mechanistic studies of ...

    African Journals Online (AJOL)

    styrylpyrylium perchlorates have been evaluated using cyclic voltammetry, in comparison to their non-methylated derivatives values. The reduction peak of all studied compounds remained chemically irreversible. The presence of the ...

  1. Risk factors for positive margins in conservative surgery for breast cancer after neoadjuvant chemotherapy.

    Science.gov (United States)

    Bouzón, Alberto; Acea, Benigno; García, Alejandra; Iglesias, Ángela; Mosquera, Joaquín; Santiago, Paz; Seoane, Teresa

    2016-01-01

    Breast conservative surgery after neoadjuvant chemotherapy intends to remove any residual tumor with negative margins. The purpose of this study was to analyze the preoperative clinical-pathological factors influencing the margin status after conservative surgery in breast cancer patients receiving neoadjuvant chemotherapy. A retrospective study of 91 breast cancer patients undergoing neoadjuvant chemotherapy (92 breast lesions) during the period 2006 to 2013. A Cox regression analysis to identify baseline tumor characteristics associated with positive margins after breast conservative surgery was performed. Of all cases, 71 tumors were initially treated with conservative surgery after neoadjuvant chemotherapy. Pathologic exam revealed positive margins in 16 of the 71 cases (22.5%). The incidence of positive margins was significantly higher in cancers with initial size >5cm (P=.021), in cancers with low tumor grade (P=.031), and in patients with hormone receptor-positive cancer (P=.006). After a median follow-up of 45.2 months, 7 patients of the 71 treated with conservative surgery had disease recurrence (9.8%). There was no significant difference in terms of disease-free survival according to the margin status (P=.596). A baseline tumor size >5cm, low tumor grade and hormone receptor-positive status increase the risk for surgical margin involvement in breast conservative surgery after neoadjuvant chemotherapy. Copyright © 2016 AEC. Publicado por Elsevier España, S.L.U. All rights reserved.

  2. An Investigation of Rotorcraft Stability-Phase Margin Requirements in Hover

    Science.gov (United States)

    Blanken, Chris L.; Lusardi, Jeff A.; Ivler, Christina M.; Tischler, Mark B.; Hoefinger, Marc T.; Decker, William A.; Malpica, Carlos A.; Berger, Tom; Tucker, George E.

    2009-01-01

    A cooperative study was performed to investigate the handling quality effects from reduced flight control system stability margins, and the trade-offs with higher disturbance rejection bandwidth (DRB). The piloted simulation study, perform on the NASA-Ames Vertical Motion Simulator, included three classes of rotorcraft in four configurations: a utility-class helicopter; a medium-lift helicopter evaluated with and without an external slung load; and a large (heavy-lift) civil tiltrotor aircraft. This large aircraft also allowed an initial assessment of ADS-33 handling quality requirements for an aircraft of this size. Ten experimental test pilots representing the U.S. Army, Marine Corps, NASA, rotorcraft industry, and the German Aerospace Center (DLR), evaluated the four aircraft configurations, for a range of flight control stability-margins and turbulence levels, while primarily performing the ADS-33 Hover and Lateral Reposition MTEs. Pilot comments and aircraft-task performance data were analyzed. The preliminary stability margin results suggest higher DRB and less phase margin cases are preferred as the aircraft increases in size. Extra care will need to be taken to assess the influence of variability when nominal flight control gains start with reduced margins. Phase margins as low as 20-23 degrees resulted in low disturbance-response damping ratios, objectionable oscillations, PIO tendencies, and a perception of an incipient handling qualities cliff. Pilot comments on the disturbance response of the aircraft correlated well to the DRB guidelines provided in the ADS-33 Test Guide. The A D-3S3 mid-term response-to-control damping ratio metrics can be measured and applied to the disturbance-response damping ratio. An initial assessment of LCTR yaw bandwidth shows the current Level 1 boundary needs to be relaxed to help account for a large pilot off-set from the c.g. Future efforts should continue to investigate the applicability/refinement of the current ADS-33

  3. Aspects of the licensing procedures for enrichment reduction in research reactors

    International Nuclear Information System (INIS)

    Krull, W.

    1983-01-01

    The enrichment reduction for research reactors requires a licensing procedure. For this purpose the qualification of the new fuel has to be demonstrated and changes in reactor safety have to be investigated like reactivity values, form-factors, Pu- and fission product inventory, safety margins and accidents. Calculations should be partly experimentally verified. The possible extent of the licensing procedure is discussed. (orig.) [de

  4. Evaluation of margining algorithms in commercial treatment planning systems

    International Nuclear Information System (INIS)

    Pooler, Alistair M.; Mayles, Helen M.; Naismith, Olivia F.; Sage, John P.; Dearnaley, David P.

    2008-01-01

    Introduction: During commissioning of the Pinnacle (Philips) treatment planning system (TPS) the margining algorithm was investigated and was found to produce larger PTVs than Plato (Nucletron) for identical GTVs. Subsequent comparison of PTV volumes resulting from the QA outlining exercise for the CHHIP (Conventional or Hypofractionated High Dose IMRT for Prostate Ca.) trial confirmed that there were differences in TPS's margining algorithms. Margining and the clinical impact of the different PTVs in seven different planning and virtual simulation systems (Pinnacle, Plato, Prosoma (MedCom), Eclipse (7.3 and 7.5) (Varian), MasterPlan (Nucletron), Xio (CMS) and Advantage Windows (AW) (GE)) is investigated, and a simple test for 3D margining consistency is proposed. Methods: Using each TPS, two different sets of prostate GTVs on 2.5 mm and 5 mm slices were margined according to the CHHIP protocol to produce PTV3 (prostate + 5 mm/0 mm post), PTV2 (PTV3 + 5 mm) and PTV1 (prostate and seminal vesicles + 10 mm). GTVs and PTVs were imported into Pinnacle for volume calculation. DVHs for 5 mm slice plans, created using the smallest PTVs, were recalculated on the largest PTV dataset and vice versa. Since adding a margin of 50 mm to a structure should give the same result as adding five margins of 10 mm, this was tested for each TPS (consistency test) using an octahedron as the GTV and CT datasets with 2.5 mm and 5 mm slices. Results: The CHHIP PTV3 and PTV1 volumes had a standard deviation, across the seven systems, of 5% and PTV2 (margined twice) 9%, on the 5 mm slices. For 2.5 mm slices the standard deviations were 4% and 6%. The ratio of the Pinnacle and the Eclipse 7.3 PTV2 volumes was 1.25. Rectal doses were significantly increased when encompassing Pinnacle PTVs (V 50 42.8%), compared to Eclipse 7.3 PTVs (V 50 = 36.4%). Conversely, fields that adequately treated an Eclipse 7.3 PTV2 were inadequate for a Pinnacle PTV2. AW and Plato PTV volumes were the most consistent

  5. Correspondence between conventional and digitised radiographs for assessment of marginal bone.

    Science.gov (United States)

    Bahrami, Golnosh; Isidor, Flemming; Wenzel, Ann; Vaeth, Michael

    2013-01-01

    To compare reproducibility of marginal bone measurements in conventional film and digitised radiographs and to assess whether variations in reproducibility occurred in measurements taken in a longitudinal, epidemiological survey. Triplicate measurements of the marginal bone level and of remaining bone were obtained from film and digitised full-mouth radiographic surveys from 20 individuals who were examined three times at five-year intervals in a longitudinal study design. The digitalisation of the films was conducted by scanning the film with a flatbed scanner. The standard deviation (SD) of the triplicate measurements served as the statistic for reproducibility. The time spent for recording one radiographic survey, which consisted of 14 periapicals and 2 bitewings, was documented. Statistically significant differences existed in the reproducibility of marginal bone level measurements obtained at the first examination and the two subsequent examinations both for film and digitised radiographs (P < 0.05). The difference in marginal bone level measurements (film vs digitised) was 0.16 mm (SD = 0.45 mm). Similarly, the overall difference in measurements of the remaining bone was 0.12 mm (SD = 0.61 mm). Recording of a digitised survey lasted on average 5 min (SD = 1.5 min), while the recording of a film survey lasted on average 14 min (SD = 1 min). Digitising film is an acceptable method for the purpose of assessing the marginal bone level and will save time in longitudinal, epidemiological studies.

  6. Excision margin status: does it impact on local control of breast cancer?

    International Nuclear Information System (INIS)

    Lamoury, G.; Morgan, G.; Ward, R.

    2003-01-01

    Whilst many patients treated with breast conservation undergo re-excision(s) to obtain clear margins, the relationship between clear margins and local recurrence remains unclear. We aimed to determine the impact of final pathological margin status on local recurrence and other breast cancer outcomes. Our study cohort consisted of 755 consecutive patients treated with breast conservation between January 1984 and December 1995. Pathology reports were available for review in 681subjects (90%). Patients were stratified into 8 groups based on final pathological margin status: 1) negative (>3mm, n = 307), close [further divided into two groups 2) >0 1< 2mm, (n = 67)], 4) positive (n= 79), 5) indeterminate (n= 144), 6) low grade DCIS at the margin (n= 3), 7) high grade DCIS at the margin (n= 23) and 8) LCIS at the margin (n= 4). There were no differences between the groups based on histology, T size, grade, LN positivity or total radiation dose. At a median follow-up of 71 months, the breast relapse free survival (BRFS) was 97%, the distant metastasis free survival (DMFS) 78% and the overall survival (OS) 86%, for the entire cohort. There were no statistically significant differences between the negative, close, and positive groups in terms of BRFS: 96% vs. 94% vs. 93% (p=0.59), MFS: 98% vs. 97% vs. 98% (p=0.87) or OS: 84%vs. 85% vs. 86% (p=0.78). Although not statistically significant, the presence of EIC, in the context of close or positive margins, impacted adversely upon local and overall disease free survival. Patients undergoing breast conservation carry a lifelong risk of local recurrence. It is still not clear whether obtaining a radical margin decreases this risk. Tissue microarray analysis will be performed to further elucidate the causes of ipsilateral recurrence at a molecular and genetic level

  7. Marginal abatement cost curve for nitrogen oxides incorporating controls, renewable electricity, energy efficiency, and fuel switching.

    Science.gov (United States)

    Loughlin, Daniel H; Macpherson, Alexander J; Kaufman, Katherine R; Keaveny, Brian N

    2017-10-01

    A marginal abatement cost curve (MACC) traces out the relationship between the quantity of pollution abated and the marginal cost of abating each additional unit. In the context of air quality management, MACCs are typically developed by sorting control technologies by their relative cost-effectiveness. Other potentially important abatement measures such as renewable electricity, energy efficiency, and fuel switching (RE/EE/FS) are often not incorporated into MACCs, as it is difficult to quantify their costs and abatement potential. In this paper, a U.S. energy system model is used to develop a MACC for nitrogen oxides (NO x ) that incorporates both traditional controls and these additional measures. The MACC is decomposed by sector, and the relative cost-effectiveness of RE/EE/FS and traditional controls are compared. RE/EE/FS are shown to have the potential to increase emission reductions beyond what is possible when applying traditional controls alone. Furthermore, a portion of RE/EE/FS appear to be cost-competitive with traditional controls. Renewable electricity, energy efficiency, and fuel switching can be cost-competitive with traditional air pollutant controls for abating air pollutant emissions. The application of renewable electricity, energy efficiency, and fuel switching is also shown to have the potential to increase emission reductions beyond what is possible when applying traditional controls alone.

  8. Large margin image set representation and classification

    KAUST Repository

    Wang, Jim Jing-Yan; Alzahrani, Majed A.; Gao, Xin

    2014-01-01

    In this paper, we propose a novel image set representation and classification method by maximizing the margin of image sets. The margin of an image set is defined as the difference of the distance to its nearest image set from different classes and the distance to its nearest image set of the same class. By modeling the image sets by using both their image samples and their affine hull models, and maximizing the margins of the images sets, the image set representation parameter learning problem is formulated as an minimization problem, which is further optimized by an expectation - maximization (EM) strategy with accelerated proximal gradient (APG) optimization in an iterative algorithm. To classify a given test image set, we assign it to the class which could provide the largest margin. Experiments on two applications of video-sequence-based face recognition demonstrate that the proposed method significantly outperforms state-of-the-art image set classification methods in terms of both effectiveness and efficiency.

  9. Large margin image set representation and classification

    KAUST Repository

    Wang, Jim Jing-Yan

    2014-07-06

    In this paper, we propose a novel image set representation and classification method by maximizing the margin of image sets. The margin of an image set is defined as the difference of the distance to its nearest image set from different classes and the distance to its nearest image set of the same class. By modeling the image sets by using both their image samples and their affine hull models, and maximizing the margins of the images sets, the image set representation parameter learning problem is formulated as an minimization problem, which is further optimized by an expectation - maximization (EM) strategy with accelerated proximal gradient (APG) optimization in an iterative algorithm. To classify a given test image set, we assign it to the class which could provide the largest margin. Experiments on two applications of video-sequence-based face recognition demonstrate that the proposed method significantly outperforms state-of-the-art image set classification methods in terms of both effectiveness and efficiency.

  10. Single-Center Experience Using Marginal Liver Grafts in Korea.

    Science.gov (United States)

    Park, P-J; Yu, Y-D; Yoon, Y-I; Kim, S-R; Kim, D-S

    2018-05-01

    Liver transplantation (LT) is an established therapeutic modality for patients with end-stage liver disease. The use of marginal donors has become more common worldwide due to the sharp increase in recipients, with a consequent shortage of suitable organs. We analyzed our single-center experience over the last 8 years in LT to evaluate the outcomes of using so-called "marginal donors." We retrospectively analyzed the database of all LTs performed at our institution from 2009 to 2017. Only patients undergoing deceased-donor LTs were analyzed. Marginal grafts were defined as livers from donors >60 years of age, livers from donors with serum sodium levels >155 mEq, graft steatosis >30%, livers with cold ischemia time ≥12 hours, livers from donors who were hepatitis B or C virus positive, livers recovered from donation after cardiac death, and livers split between 2 recipients. Patients receiving marginal grafts (marginal group) were compared with patients receiving standard grafts (standard group). A total of 106 patients underwent deceased-donor LT. There were 55 patients in the standard group and 51 patients in the marginal group. There were no significant differences in terms of age, sex, Model for End-Stage Liver Disease score, underlying liver disease, presence of hepatocellular carcinoma, and hospital stay between the 2 groups. Although the incidence of acute cellular rejection, cytomegalovirus infection, and postoperative complications was similar between the 2 groups, the incidence of early allograft dysfunction was higher in the marginal group. With a median follow-up of 26 months, the 1-, 3-, and 5-year overall and graft (death-censored) survivals in the marginal group were 85.5%, 75%, and 69.2% and 85.9%, 83.6%, and 77.2%, respectively. Patient overall survival and graft survival (death-censored) were significantly lower in the marginal group (P = .023 and P = .048, respectively). On multivariate analysis, receiving a marginal graft (hazard ratio [HR

  11. Identifying Gaps in the Performance of Pediatric Trainees Who Receive Marginal/Unsatisfactory Ratings.

    Science.gov (United States)

    Li, Su-Ting T; Tancredi, Daniel J; Schwartz, Alan; Guillot, Ann; Burke, Ann; Trimm, R Franklin; Guralnick, Susan; Mahan, John D; Gifford, Kimberly A

    2018-01-01

    To perform a derivation study to determine in which subcompetencies marginal/unsatisfactory pediatric residents had the greatest deficits compared with their satisfactorily performing peers and which subcompetencies best discriminated between marginal/unsatisfactory and satisfactorily performing residents. Multi-institutional cohort study of all 21 milestones (rated on four or five levels) reported to the Accreditation Council for Graduate Medical Education, and global marginal/unsatisfactory versus satisfactory performance reported to the American Board of Pediatrics. Data were gathered in 2013-2014. For each level of training (postgraduate year [PGY] 1, 2, and 3), mean differences between milestone levels of residents with marginal/unsatisfactory and satisfactory performance adjusted for clustering by program and C-statistics (area under receiver operating characteristic curve) were calculated. A Bonferroni-corrected significance threshold of .0007963 was used to account for multiple comparisons. Milestone and overall performance evaluations for 1,704 pediatric residents in 41 programs were obtained. For PGY1s, two subcompetencies had almost a one-point difference in milestone levels between marginal/unsatisfactory and satisfactory trainees and outstanding discrimination (≥ 0.90): organize/prioritize (0.93; C-statistic: 0.91) and transfer of care (0.97; C-statistic: 0.90). The largest difference between marginal/unsatisfactory and satisfactory PGY2s was trustworthiness (0.78). The largest differences between marginal/unsatisfactory and satisfactory PGY3s were ethical behavior (1.17), incorporating feedback (1.03), and professionalization (0.96). For PGY2s and PGY3s, no subcompetencies had outstanding discrimination. Marginal/unsatisfactory pediatric residents had different subcompetency gaps at different training levels. While PGY1s may have global deficits, senior residents may have different performance deficiencies requiring individualized counseling and

  12. Effect of Blood Contamination on Marginal Adaptation and Surface Microstructure of Mineral Trioxide Aggregate: A SEM Study.

    Science.gov (United States)

    Salem Milani, Amin; Rahimi, Saeed; Froughreyhani, Mohammad; Vahid Pakdel, Mahdi

    2013-01-01

    In various clinical situations, mineral trioxide aggregate (MTA) may come into direct contact or even be mixed with blood. The aim of the present study was to evaluate the effect of exposure to blood on marginal adaptation and surface microstructure of MTA. Thirty extracted human single-rooted teeth were used. Standard root canal treatment was carried out. Root-ends were resected, and retrocavities were prepared. The teeth were randomly divided into two groups (n = 15): in group 1, the internal surface of the cavities was coated with fresh blood. Then, the cavities were filled with MTA. The roots were immersed in molds containing fresh blood. In group 2, the aforementioned procedures were performed except that synthetic tissue fluid (STF) was used instead of blood. To assess the marginal adaptation, "gap perimeter" and "maximum gap width" were measured under scanning electron microscope. The surface microstructure was also examined. Independent samples t-test and Mann-Whitney U test were used to analyze the data. Maximum gap width and gap perimeter in the blood-exposed group were significantly larger than those in the STF-exposed group (p < 0.01). In the blood-exposed group, the crystals tended to be more rounded and less angular compared with the STF-exposed group, and there was a general lack of needle-like crystals. Exposure to blood during setting has a negative effect on marginal adaptation of MTA, and blood-exposed MTA has a different surface microstructure compared to STF-exposed MTA.

  13. How to make offshore marginal fields work for everyone

    International Nuclear Information System (INIS)

    Blandford, P.R.

    1995-01-01

    Marginal fields make positive impact on certain oil and gas companies' financial performances. These developments are integrated into the operator's operational and philosophical mindset, so that they optimize return and establish a reasonable reserve base for the company. Having a portfolio of marginal field developments is definitely a part of the offshore business, and oil field suppliers and subcontractors will continue to develop technology and methods to ensure the fields are exploited. It goes without saying that the continued production of marginal fields helps a lot of consumers and the companies that make up the energy chain that gets it to them. There are marginal fields all over the world and the market can only grow as more and more of the resources decline and industrialization expands demand. The projections for 2020 state that fossil fuels will remain the major supply link to dependable and affordable energy, particularly as additional oil and gas infrastructures are built and installed. Likened to the commodity, oil and gas companies and the energy industry have slowly evolved to the point where they are making a difference for people worldwide. As long as there is product to produce, most companies and consumers do not really care what type of reservoir started it all. More often then not, it probably started out as a marginal prospect. The paper discusses the energy picture today, marginal field update, offshore marginal field geography, and independent and marginal field developments

  14. Exploring the Subtleties of Inverse Probability Weighting and Marginal Structural Models.

    Science.gov (United States)

    Breskin, Alexander; Cole, Stephen R; Westreich, Daniel

    2018-05-01

    Since being introduced to epidemiology in 2000, marginal structural models have become a commonly used method for causal inference in a wide range of epidemiologic settings. In this brief report, we aim to explore three subtleties of marginal structural models. First, we distinguish marginal structural models from the inverse probability weighting estimator, and we emphasize that marginal structural models are not only for longitudinal exposures. Second, we explore the meaning of the word "marginal" in "marginal structural model." Finally, we show that the specification of a marginal structural model can have important implications for the interpretation of its parameters. Each of these concepts have important implications for the use and understanding of marginal structural models, and thus providing detailed explanations of them may lead to better practices for the field of epidemiology.

  15. Values and marginal preferences in international business

    NARCIS (Netherlands)

    Maseland, Robbert; van Hoorn, Andre

    2010-01-01

    In a recent paper in this journal, Maseland and van Hoorn argued that values surveys tend to conflate values and marginal preferences. This assertion has been challenged by Brewer and Venaik, who claim that the wording of most survey items does not suggest that these elicit marginal preferences.

  16. Aggregate Settling Velocities in San Francisco Estuary Margins

    Science.gov (United States)

    Allen, R. M.; Stacey, M. T.; Variano, E. A.

    2015-12-01

    One way that humans impact aquatic ecosystems is by adding nutrients and contaminants, which can propagate up the food web and cause blooms and die-offs, respectively. Often, these chemicals are attached to fine sediments, and thus where sediments go, so do these anthropogenic influences. Vertical motion of sediments is important for sinking and burial, and also for indirect effects on horizontal transport. The dynamics of sinking sediment (often in aggregates) are complex, thus we need field data to test and validate existing models. San Francisco Bay is well studied and is often used as a test case for new measurement and model techniques (Barnard et al. 2013). Settling velocities for aggregates vary between 4*10-5 to 1.6*10-2 m/s along the estuary backbone (Manning and Schoellhamer 2013). Model results from South San Francisco Bay shoals suggest two populations of settling particles, one fast (ws of 9 to 5.8*10-4 m/s) and one slow (ws of Brand et al. 2015). While the open waters of San Francisco Bay and other estuaries are well studied and modeled, sediment and contaminants often originate from the margin regions, and the margins remain poorly characterized. We conducted a 24 hour field experiment in a channel slough of South San Francisco Bay, and measured settling velocity, turbulence and flow, and suspended sediment concentration. At this margin location, we found average settling velocities of 4-5*10-5 m/s, and saw settling velocities decrease with decreasing suspended sediment concentration. These results are consistent with, though at the low end of, those seen along the estuary center, and they suggest that the two population model that has been successful along the shoals may also apply in the margins.

  17. Assessment of margins in resection specimens for head and neck malignancies.

    Science.gov (United States)

    Janjua, Omer Sefvan; Ahmed, Waseem; Qureshi, Sana Mehmood; Khan, Tariq Sarfaraz; Ahmed, Ashfaq; Alamgir, Wajiha

    2013-04-01

    To determine the relative frequency of clear, close and involved margins in resection specimens for head and neck malignancies. An observational study. The Department of Oral and Maxillofacial Surgery, Armed Forces Institute of Dentistry, Rawalpindi and the Department of Histopathology, Armed Forces Institute of Pathology, Rawalpindi, from January 2008 to December 2010. Tumour registers and computer data bases in the department of Histopathology of Armed Forces Institute of Pathology, Rawalpindi, were analyzed for the cases of malignancies involving head and neck region that were sent for histopathological analysis after resection in the last three years. Histopathology reports were obtained. The data regarding age, gender, site, type of malignancy and margin status (clear, close or involved) was recorded on specially designed proformas for the study and later on analyzed by using SPSS version 17.0. Results were expressed. A total of 319 cases were registered in the study duration. The age of the patients ranged from 22-90 years (mean 59.5 + 14.1 years). Male to female ratio was 1.53:1. One hundred and thirty six (42.6%) were squamous cell carcinoma (SCC), 163 were basal cell carcinomas (BCC, 51.0%); the rest included 18 salivary gland malignancies (5.7%) and one carcino-sarcoma (0.31%) and chondrosarcoma each. All margins were found clear in 137 patients (42.9%); involved in 168 cases (52.7%) and close in 14 cases (4.4%). Margin clearance could not be achieved in more than 50% cases, this can lead to poor prognosis. Hence, methods should be adopted to improve the margin clearance in various head and neck malignancies.

  18. Variability of the geothermal gradient across two differently aged magma-rich continental rifted margins of the Atlantic Ocean: the Southwest African and the Norwegian margins

    Science.gov (United States)

    Gholamrezaie, Ershad; Scheck-Wenderoth, Magdalena; Sippel, Judith; Strecker, Manfred R.

    2018-02-01

    The aim of this study is to investigate the shallow thermal field differences for two differently aged passive continental margins by analyzing regional variations in geothermal gradient and exploring the controlling factors for these variations. Hence, we analyzed two previously published 3-D conductive and lithospheric-scale thermal models of the Southwest African and the Norwegian passive margins. These 3-D models differentiate various sedimentary, crustal, and mantle units and integrate different geophysical data such as seismic observations and the gravity field. We extracted the temperature-depth distributions in 1 km intervals down to 6 km below the upper thermal boundary condition. The geothermal gradient was then calculated for these intervals between the upper thermal boundary condition and the respective depth levels (1, 2, 3, 4, 5, and 6 km below the upper thermal boundary condition). According to our results, the geothermal gradient decreases with increasing depth and shows varying lateral trends and values for these two different margins. We compare the 3-D geological structural models and the geothermal gradient variations for both thermal models and show how radiogenic heat production, sediment insulating effect, and thermal lithosphere-asthenosphere boundary (LAB) depth influence the shallow thermal field pattern. The results indicate an ongoing process of oceanic mantle cooling at the young Norwegian margin compared with the old SW African passive margin that seems to be thermally equilibrated in the present day.

  19. Marginal bone-level alterations of loaded zirconia and titanium dental implants: an experimental study in the dog mandible.

    Science.gov (United States)

    Thoma, Daniel S; Benic, Goran I; Muñoz, Fernando; Kohal, Ralf; Sanz Martin, Ignacio; Cantalapiedra, Antonio G; Hämmerle, Christoph H F; Jung, Ronald E

    2016-04-01

    The aim was to test whether or not the marginal bone-level alterations of loaded zirconia implants are similar to the bone-level alterations of a grade 4 titanium one-piece dental implant. In six dogs, all premolars and the first molars were extracted in the mandible. Four months later, three zirconia implants (BPI, VC, ZD) and a control titanium one-piece (STM) implant were randomly placed in each hemimandible and left for transmucosal healing (baseline). Six months later, CAD/CAM crowns were cemented. Sacrifice was scheduled at 6-month postloading. Digital X-rays were taken at implant placement, crowns insertion, and sacrifice. Marginal bone-level alterations were calculated, and intra- and intergroup comparisons performed adjusted by confounding factors. Implants were successfully placed. Until crown insertion, two implants were fractured (one VC, one ZD). At sacrifice, 5 more implants were (partly) fractured (one BPI, four ZD), and one lost osseointegration (VC). No decementation of crowns occurred. All implant systems demonstrated a statistically significant (except VC) loss of marginal bone between baseline and crown insertion ranging from 0.29 mm (VC; P = 0.116) to 0.80 mm (ZD; P = 0.013). The estimated marginal bone loss between baseline and 6 months of loading ranged between 0.19 mm (BPI) and 1.11 mm (VC), being statistically significant for STM and VC only (P implants and control implants (STM vs. BPI P = 0.007; vs. VC P = 0.001; vs. ZD P = 0.011). Zirconia implants were more prone to fracture prior to and after loading with implant-supported crowns compared to titanium implants. Individual differences and variability in the extent of the bone-level changes during the 12-month study period were found between the different implant types and materials. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  20. Extensive and intensive margins and the choice of exchange rate regimes

    OpenAIRE

    Masashige Hamano; Pierre M. Picard

    2013-01-01

    This paper studies how the choice of fixed or flexible exchange rate regimes is affected by the existence of intensive and extensive margins. We study two models where firms enter during or before each period of production. We show how the the choice of those regimes depend on the level and the volatily of the intensive and extensive margins as well as on the congruence between consumers' preferences and the supply and diversity of products. We show that fixed exchange rate regimes are prefer...

  1. Fedme og risiko for marginal parodontitis

    DEFF Research Database (Denmark)

    Kongstad, Johanne; Keller, Amélie Cléo; Rohde, Jeanett Friis

    2017-01-01

    Oversigtsartiklen, der er af narrativ karakter, beskriver sammenhængen mellem overvægt/ fedme og marginal parodontitis. Artiklen er baseret på et udvalg af nyere engelsksproget litteratur og motiveres af den øgede forekomst af overvægtige og fede i befolkningen. Desuden er det afgørende, at tandl......Oversigtsartiklen, der er af narrativ karakter, beskriver sammenhængen mellem overvægt/ fedme og marginal parodontitis. Artiklen er baseret på et udvalg af nyere engelsksproget litteratur og motiveres af den øgede forekomst af overvægtige og fede i befolkningen. Desuden er det afgørende......, at tandlæger forholder sig kritisk til systemiske tilstandes mulige konsekvens for udvikling, forværring og behandling af marginal parodontitis. Der nævnes forskellige mål for fedme, hvor body mass index (BMI) og taljeomkreds er de mest anvendte. Problematikken vedrørende tidligere studiers anvendelse af...... forskellige kriterier for marginal parodontitis berøres. Litteraturgennemgangen tager udgangspunkt i de biologiske mekanismer, der udløses i fedtvæv ved overvægt/fedme og medfører en kronisk inflammatorisk tilstand med frigivelse af bl.a. adipokiner. Epidemiologiske tværsnitsog longitudinelle studier af...

  2. Terraced margins of inflated lava flows on Earth and Mars

    Science.gov (United States)

    Zimbelman, J. R.; Garry, W. B.; Bleacher, J. E.; Crumpler, L. S.

    2011-12-01

    When fluid basaltic lava flows are emplaced over a shallow regional slope (typically much less than one degree), the lava flows often display impressive characteristics of inflation. Here we describe a distinctive marginal characteristic that is often developed along the margins of endogenously inflated basaltic lava flows; discreet topographic levels of the emplaced lava that are here termed 'terraced margins'. Terraced margins were first noted at the distal end of the Carrizozo lava flow in central New Mexico, where they are particularly well expressed, but terraces have also been observed along some margins of the McCartys lava flow (NM), the distal end of the 1859 Mauna Loa lava flow (HI), and lava flows at Craters of the Moon (ID). Differential Global Positioning System surveys across several terraced margins reveal consistent topographic characteristics: the upper surface of each terrace level is at roughly one half the height of the sheet lobe from which it emerges; when a terrace becomes the source of an additional outbreak, the upper surface of the second terrace is at roughly one half the height of the source terrace; often a subtle topographic depression is present along the contact between a terrace and its source sheet lobe, suggesting that the terrace outflow starts at a level roughly one-third the height of the source lobe; the upper surfaces of both the source sheet lobe and associated terraces are level to within tens of centimeters across length scales of many tens to hundreds of meters, indicative of inflation of all components. The field observations will be used as the constraints for modeling of the inflation and terracing mechanisms, an effort that has only recently started. The multiple imaging data sets now available for Mars have revealed the presence of terraced margins on some lava flows on Mars. Although detailed topographic data are not currently available for the Martian examples identified so far, the presence of terraced margins for

  3. Molecular pathogenesis of splenic and nodal marginal zone lymphoma.

    Science.gov (United States)

    Spina, Valeria; Rossi, Davide

    Genomic studies have improved our understanding of the biological basis of splenic (SMZL) and nodal (NMZL) marginal zone lymphoma by providing a comprehensive and unbiased view of the genes/pathways that are deregulated in these diseases. Consistent with the physiological involvement of NOTCH, NF-κB, B-cell receptor and toll-like receptor signaling in mature B-cells differentiation into the marginal zone B-cells, many oncogenic mutations of genes involved in these pathways have been identified in SMZL and NMZL. Beside genetic lesions, also epigenetic and post-transcriptional modifications contribute to the deregulation of marginal zone B-cell differentiation pathways in SMZL and NMZL. This review describes the progress in understanding the molecular mechanism underlying SMZL and NMZL, including molecular and post-transcriptional modifications, and discusses how information gained from these efforts has provided new insights on potential targets of diagnostic, prognostic and therapeutic relevance in SMZL and NMZL. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. [Lead poisoning and marginalization in newborns of Morelos, Mexico].

    Science.gov (United States)

    Téllez-Rojo, Martha María; Bautista-Arredondo, Luis F; Richardson, Vesta; Estrada-Sánchez, Daniel; Ávila-Jiménez, Laura; Ríos, Camilo; Cantoral-Preciado, Alejandra; Romero-Martínez, Martín; Flores-Pimentel, Delia; Melo-Zurita, María Del Carmen; Romero-Ramírez, Anita; León-Mazón, Marco Antonio; Montes, Sergio; Fuller, Richard; Hernández-Ávila, Mauricio

    2017-01-01

    To determine the prevalence of lead (Pb) poisoning at birth in Morelos, analyze its distribution by social marginalization level, and estimate the association with the use of lead glazed ceramics (LGC). Blood lead level (BLL) in umbilical cord was measured in a representative sample of 300 randomly selected births at the Morelos Health Services and state IMSS. The prevalence of Pb poisoning at birth (BLL> 5μg/dL) was 14.7% (95%CI: 11.1, 19.3) and 22.2% (95%CI: 14.4, 32.5) in the most socially marginalized municipalities. 57.1% (95%CI: 51.3, 62.7) of the mothers used LGC during pregnancy, and the frequency of use was significantly associated with BLL. This is the first study to document the proportion of newborns with Pb poisoning who are at risk of experiencing the related adverse effects. It is recommended to monitor BLL at birth and take action to reduce this exposure, especially in socially marginalized populations.

  5. The Effect of Sintering Time on the Marginal Fit of Zirconia Copings.

    Science.gov (United States)

    Khaledi, Amir Ali Reza; Vojdani, Mahroo; Farzin, Mitra; Pirouzi, Sudabeh; Orandi, Sepideh

    2018-01-03

    This study analyzed the effect of different sintering times on the marginal adaptation of zirconia ceramic copings. Thirty copings of pre-sintered 3Y-TZP blanks were milled and subsequently sintered in a special furnace for three different durations (n = 10 per group). The sintering time was 1 hour, 15 minutes for IPS e.max ZirCAD, 4 hours 20 minutes for Speed ZrO 2, and 7 hours 20 minutes for the conventional ZrO 2 group. The marginal gaps of specimens were measured at 18 spots on the master die by employing a digital microscope. One-way ANOVA test compared the mean differences among the 3 groups (α = 0.05). The mean values for the marginal gap of the IPS e.max ZirCAD, Speed ZrO 2 , and conventional ZrO 2 groups were 41.06 ± 14.03, 43.03 ± 11.67, and 39.88 ± 15.23 μm, respectively. There was no statistically significant difference among the groups regarding the marginal gap. Different sintering times did not alter the marginal fit of the zirconia copings. The mean values of the marginal gap were within the clinically acceptable level for all three groups. © 2018 by the American College of Prosthodontists.

  6. Refining prices and margins in 1998

    International Nuclear Information System (INIS)

    Favennec, J.P.; Baudoin, C.

    1999-01-01

    Despite a business environment that was globally mediocre due primarily to the Asian crisis and to a mild winter in the northern hemisphere, the signs of improvement noted in the refining activity in 1996 were borne out in 1997. But the situation is not yet satisfactory in this sector: the low return on invested capital and the financing of environmental protection expenditure are giving cause for concern. In 1998, the drop in crude oil prices and the concomitant fall in petroleum product prices was ultimately rather favorable to margins. Two elements tended to put a damper on this relative optimism. First of all, margins continue to be extremely volatile and, secondly, the worsening of the economic and financial crisis observed during the summer made for a sharp decline in margins in all geographic regions, especially Asia

  7. Environmental margin and island evolution in Middle Eastern populations of the Egyptian fruit bat.

    Science.gov (United States)

    Hulva, P; Marešová, T; Dundarova, H; Bilgin, R; Benda, P; Bartonička, T; Horáček, I

    2012-12-01

    Here, we present a study of the population genetic architecture and microevolution of the Egyptian fruit bat (Rousettus aegyptiacus) at the environmental margins in the Middle East using mitochondrial sequences and nuclear microsatellites. In contrast to the rather homogenous population structure typical of cave-dwelling bats in climax tropical ecosystems, a relatively pronounced isolation by distance and population diversification was observed. The evolution of this pattern could be ascribed to the complicated demographic history at higher latitudes related to the range margin fragmentation and complex geomorphology of the studied area. Lineages from East Africa and Arabia show divergent positions. Within the northwestern unit, the most marked pattern of the microsatellite data set is connected with insularity, as demonstrated by the separate status of populations from Saharan oases and Cyprus. These demes also exhibit a reduction in genetic variability, which is presumably connected with founder effects, drift and other potential factors related to island evolution as site-specific selection. Genetic clustering indicates a semipermeability of the desert barriers in the Sahara and Arabian Peninsula and a corridor role of the Nile Valley. The results emphasize the role of the island environment in restricting the gene flow in megabats, which is also corroborated by biogeographic patterns within the family, and suggests the possibility of nascent island speciation on Cyprus. Demographic analyses suggest that the colonization of the region was connected to the spread of agricultural plants; therefore, the peripatric processes described above might be because of or strengthened by anthropogenic changes in the environment. © 2012 Blackwell Publishing Ltd.

  8. TRANSGRESSIVE SEQUENCES ON FORELAND MARGINS: A CASE STUDY OF THE NEOGENE CENTRAL GUADALQUIVIR BASIN, SOUTHERN SPAIN

    Directory of Open Access Journals (Sweden)

    J. GABRIEL PENDÓN

    2004-07-01

    Full Text Available The Guadalquivir foreland basin, located between the Iberian basement northward and the Betic orogen to the South, represents the western sector of the earlier foredeep basin of the Betic Cordillera. Along the northern foreland margin, the sedimentary fill of this basin includes a Tortonian Basal Transgressive Complex (BTC, composed of five internal sequences bounded by transgressive surfaces. Two main parts are distinguished within each sequence: the lower transgressive lag deposits, and the upper stillstand/prograding sediments. Three facies associations were distinguished within this stratigraphic succession along the central sector of this basin margin: unfossiliferous conglomerates and coarse-grained sands (A, fossiliferous conglomerates and coarse-grained sands (B, and yellow medium-coarse-grained fossiliferous sands (C. A fourth facies association (D: blue silty marlstones and shales overlies the BTC. Deposits of alluvial sediments (facies association A and shallow-marine/foreshore sediments (facies association C, were recurrently interrupted by transgressive pulses (facies associations B and C. Every pulse is recorded by an erosional, cemented sandy-conglomerate bar with bivalves (Ostreidae, Isognomon, balanids, gastropods and other marine bioclasts; or their transgressive equivalents. The lateral facies changes in each individual sequence of the BTC are related to: (1 the influence on the northern foreland margin of the tectonic activity of the southern orogenic margin; (2 the palaeorelief formed by irregularities of the substrate which controls the sediment dispersal; and (3 the evolution stages of the sedimentary systems. 

  9. Significance of post-resection tissue shrinkage on surgical margins of oral squamous cell carcinoma.

    Science.gov (United States)

    El-Fol, Hossam Abdelkader; Noman, Samer Abduljabar; Beheiri, Mohamed Galal; Khalil, Abdalla M; Kamel, Mahmoud Mohamed

    2015-05-01

    Resecting oral squamous cell carcinoma (SCC) with an appropriate margin of uninvolved tissue is critical in preventing local recurrence and in making decisions regarding postoperative radiation therapy. This task can be difficult due to the discrepancy between margins measured intraoperatively and those measured microscopically by the pathologist after specimen processing. A total of 61 patients underwent resective surgery with curative intent for primary oral SCC were included in this study. All patients underwent resection of the tumor with a measured 1-cm margin. Specimens were then submitted for processing and reviewing, and histopathologic margins were measured. The closest histopathologic margin was compared with the in situ margin (1 cm) to determine the percentage discrepancy. The mean discrepancy between the in situ margins and the histopathological margins of all close and positive margins were 47.6% for the buccal mucosa (with a P value corresponding to 0.05 equaling 2.1), which is statistically significant, 4.8% for the floor of mouth, 9.5% for the mandibular alveolus, 4.8% for the retromolar trigon, and 33.3% for the tongue. There is a significant difference among resection margins based on tumor anatomical location. Margins shrinkage after resection and processing should be considered at the time of the initial resection. Tumors located in the buccal mucosa show significantly greater discrepancies than tumors at other sites. These findings suggest that it is critical to consider the oral site when outlining margins to ensure adequacy of resection. Buccal SCC is an aggressive disease, and should be considered as an aggressive subsite within the oral cavity, requiring a radical and aggressive resective approach. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

  10. Possible pathways for dealing with Japan's post-Fukushima challenge and achieving CO2 emission reduction targets in 2030

    International Nuclear Information System (INIS)

    Su, Xuanming; Zhou, Weisheng; Sun, Faming; Nakagami, Ken'Ichi

    2014-01-01

    Considering the unclear nuclear future of Japan after Fukushima Dai-ichi nuclear power plant accident since Mar. 11, 2011, this study assesses a series of energy consumption scenarios including the reference scenario, nuclear limited scenarios and current nuclear use level scenario for Japan in 2030 by the G-CEEP (Glocal Century Energy Environment Planning) model. The simulation result for each scenario is firstly presented in terms of primary energy consumption, electricity generation, CO 2 emission, marginal abatement cost and GDP (gross domestic product) loss. According to the results, energy saving contributes the biggest share in total CO 2 emission reduction, regardless of different nuclear use levels and different CO 2 emission reduction levels. A certain amount of coal generation can be retained in the nuclear limited scenarios due to the applying of CCS (carbon capture and storage). The discussion indicates that Japan needs to improve energy use efficiency, increase renewable energy and introduce CCS in order to reduce the dependence on nuclear power and to achieve CO 2 emission reduction target in 2030. In addition, it is ambitious for Japan to achieve the zero nuclear scenario with 30% CO 2 emission reduction which will cause a marginal abatement cost of 383 USD/tC and up to −2.54% GDP loss from the reference scenario. Dealing with the nuclear power issue, Japan is faced with a challenge as well as an opportunity. - Highlights: • Nuclear use limited and carbon emission reduction scenarios for Japan in 2030. • Contributions of different abatement options to carbon emissions. • CCS for reducing dependence on nuclear power

  11. A comparison of pay-as-bid and marginal pricing in electricity markets

    Science.gov (United States)

    Ren, Yongjun

    This thesis investigates the behaviour of electricity markets under marginal and pay-as-bid pricing. Marginal pricing is believed to yield the maximum social welfare and is currently implemented by most electricity markets. However, in view of recent electricity market failures, pay-as-bid has been extensively discussed as a possible alternative to marginal pricing. In this research, marginal and pay-as-bid pricing have been analyzed in electricity markets with both perfect and imperfect competition. The perfect competition case is studied under both exact and uncertain system marginal cost prediction. The comparison of the two pricing methods is conducted through two steps: (i) identify the best offer strategy of the generating companies (gencos); (ii) analyze the market performance under these optimum genco strategies. The analysis results together with numerical simulations show that pay-as-bid and marginal pricing are equivalent in a perfect market with exact system marginal cost prediction. In perfect markets with uncertain demand prediction, the two pricing methods are also equivalent but in an expected value sense. If we compare from the perspective of second order statistics, all market performance measures exhibit much lower values under pay-as-bid than under marginal pricing. The risk of deviating from the mean is therefore much higher under marginal pricing than under pay-as-bid. In an imperfect competition market with exact demand prediction, the research shows that pay-as-bid pricing yields lower consumer payments and lower genco profits. This research provides quantitative evidence that challenges some common claims about pay-as-bid pricing. One is that under pay-as-bid, participants would soon learn how to offer so as to obtain the same or higher profits than what they would have obtained under marginal pricing. This research however shows that, under pay-as-bid, participants can at best earn the same profit or expected profit as under marginal

  12. Effect of CNC-milling on the marginal and internal fit of dental ceramics: a pilot study.

    Science.gov (United States)

    Schaefer, Oliver; Kuepper, Harald; Thompson, Geoffrey A; Cachovan, Georg; Hefti, Arthur F; Guentsch, Arndt

    2013-08-01

    Machined restorations have been investigated for their preciseness before, while detailed information on the milling-step itself are lacking. Therefore, the aim of this laboratory study was to quantify the effect of a novel milling-procedure on the marginal and internal fit of ceramic restorations. An acrylic model of a lower left first molar was prepared to receive a ceramic partial crown and was duplicated by one step dual viscosity impressions. Gypsum casts were formed and laser-scanned to realize virtual datasets, before restorations were designed, exported (PRE) and machined from lithium disilicate blanks. Crowns were digitized by a structure-light-scanner to obtain post-milling-data (POST). PRE and POST were virtually superimposed on the reference tooth and subjected to computer-aided-inspection. Visual fit-discrepancies were displayed with colors, while root mean square deviations (RMSD) and degrees of similarity (DS) were computed and analysed by t-tests for paired samples (n=5, α=0.05). The milling procedure resulted in a small increase of the marginal and internal fit discrepancies (RMSD mean: 3μm and 6μm, respectively). RMSD differences were not statistically significant (p=0.495 and p=0.160 for marginal and internal fit, respectively). These results were supported by the DS data. The products of digital dental workflows are prone to imprecisions. However, the present findings suggest that differences between computer-aided designed and actually milled restorations are small, especially when compared to typical fit discrepancies observed clinically. Imprecisions introduced by digital design or production processes are small. Copyright © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

  13. Prevalence of human papilloma virus in marginal periodontium and its association with periodontitis: A cross sectional study.

    Science.gov (United States)

    Jacob, Anila; Janam, Presanthila; Babu Vijayamma, Janki Mohan

    2014-07-01

    Bacterial pathogens in dental plaque are necessary for the development of periodontitis but this etiology alone does not explain all its clinicopathologic features. Researchers have proven the role of certain viruses like herpes virus in periodontal disease which implies that other viral agents like human papilloma virus may also be involved. This cross-sectional study was conducted to determine the proportion of patients with human papilloma virus (HPV-16) in marginal periodontium by analyzing DNA from the gingival tissue sample and to understand its association with periodontitis. 102 systemically healthy patients between the age group of 15 and 70 years reporting to the Department of Periodontology who required surgical intervention (flap surgery for patients with periodontitis and crown lengthening for healthy patients) with internal bevel gingivectomy were selected. After scaling and root planning, gingival tissue was collected during the respective surgical procedure. DNA was isolated and amplified using specific primers for HPV-16 by polymerase chain reaction (PCR). The amplified products were checked by agarose gel electrophoresis. No HPV DNA was detected in the 102 samples analyzed. Marginal periodontium does not contain HPV in this study population and hence there was no association between HPV and periodontitis.

  14. Jet Noise Reduction by Microjets - A Parametric Study

    Science.gov (United States)

    Zaman, K. B. M. Q.

    2010-01-01

    The effect of injecting tiny secondary jets (microjets ) on the radiated noise from a subsonic primary jet is studied experimentally. The microjets are injected on to the primary jet near the nozzle exit with variable port geometry, working fluid and driving pressure. A clear noise reduction is observed that improves with increasing jet pressure. It is found that smaller diameter ports with higher driving pressure, but involving less thrust and mass fraction, can produce better noise reduction. A collection of data from the present as well as past experiments is examined in an attempt to correlate the noise reduction with the operating parameters. The results indicate that turbulent mixing noise reduction, as monitored by OASPL at a shallow angle, correlates with the ratio of jet to primary jet driving pressures normalized by the ratio of corresponding diameters (p d /pjD). With gaseous injection, the spectral amplitudes decrease at lower frequencies while an increase is noted at higher frequencies. It is apparent that this amplitude crossover is at least partly due to shock-associated noise from the underexpanded jets themselves. Such crossover is not seen with water injection since the flow in that case is incompressible and there is no shock-associated noise. Centerline velocity data show that larger noise reduction is accompanied by faster jet decay as well as significant reduction in turbulence intensities. While a physical understanding of the dependence of noise reduction on p d /pjD remains unclear, given this correlation, an analysis explains the observed dependence of the effect on various other parameters.

  15. Influence of radiation dose on positive surgical margins in women undergoing breast conservation therapy

    International Nuclear Information System (INIS)

    DiBiase, Steven J.; Komarnicky, Lydia T.; Heron, Dwight E.; Schwartz, Gordon F.; Mansfield, Carl M.

    2002-01-01

    Purpose: Positive surgical margins adversely influence local tumor control in breast conservation therapy (BCT). However, reports have conflicted regarding whether an increased radiation dose can overcome this poor prognostic factor. In this study, we evaluated the influence of an increased radiation dose on tumor control in women with positive surgical margins undergoing BCT. Methods and Materials: Between 1978 and 1994, 733 women with pathologic Stage I-II breast cancer and known surgical margin status were treated at Thomas Jefferson University Hospital with BCT. Of these 733 patients, 641 women had a minimal tumor bed dose of 60 Gy and had documentation of their margin status; 509 had negative surgical margins, and 132 had positive surgical margins before definitive radiotherapy. Complete gross excision of the tumor and axillary lymph node sampling was obtained in all patients. The median radiation dose to the primary site was 65.0 Gy (range 60-76). Of the women with positive margins (n=132), the influence of higher doses of radiotherapy was evaluated. The median follow-up time was 52 months. Results: The local tumor control rate for patients with negative margins at 5 and 10 years was 94% and 88%, respectively, compared with 85% and 67%, respectively, for those women with positive margins (p=0.001). The disease-free survival rate for the negative margin group at 5 and 10 years was 91% and 82%, respectively, compared with 76% and 71%, respectively, for the positive margin group (p = 0.001). The overall survival rate of women with negative margins at 5 and 10 years was 95% and 90%, respectively. By comparison, for women with positive surgical margins, the overall survival rate at 5 and 10 years was 86% and 79%, respectively (p=0.008). A comparison of the positive and negative margin groups revealed that an increased radiation dose (whether entered as a dichotomous or a continuous variable) >65.0 Gy did not improve local tumor control (p=0.776). On Cox

  16. Tectonostratigraphy of the Passive Continental Margin Offshore Indus Pakistan

    Science.gov (United States)

    Aslam, K.; Khan, M.; Liu, Y.; Farid, A.

    2017-12-01

    The tectonic evolution and structural complexities are poorly understood in the passive continental margin of the Offshore Indus of Pakistan. In the present study, an attempt has been made to interpret the structural trends and seismic stratigraphic framework in relation to the tectonics of the region. Seismic reflection data revealed tectonically controlled, distinct episodes of normal faulting representing rifting at different ages and transpression in the Late Eocene time. This transpression has resulted in the reactivation of the Pre-Cambrian basement structures. The movement of these basement structures has considerably affected the younger sedimentary succession resulting in push up structures resembling anticlines. The structural growth of the push-up structures was computed. The most remarkable tectonic setting in the region is represented by the normal faulting and by the basement uplift which divides the rifting and transpression stages. Ten mappable seismic sequences have been identified on the seismic records. A Jurassic aged paleo-shelf has also been identified on all regional seismic profiles which is indicative of Indian-African Plates separation during the Jurassic time. Furthermore, the backstripping technique was applied which has been proved to be a powerful technique to quantify subsidence/uplift history of rift-type passive continental margins. The back strip curves suggest that transition from an extensional rifted margin to transpression occurred during Eocene time (50-30 Ma). The backstripping curves show uplift had happened in the area. We infer that the uplift has occurred due to the movement of basement structures by the transpression movements of Arabian and Indian Plates. The present study suggests that the structural styles and stratigraphy of the Offshore Indus Pakistan were significantly affected by the tectonic activities during the separation of Gondwanaland in the Mesozoic and northward movement of the Indian Plate, post

  17. Splenic marginal zone lymphoma: comprehensive analysis of gene expression and miRNA profiling.

    Science.gov (United States)

    Arribas, Alberto J; Gómez-Abad, Cristina; Sánchez-Beato, Margarita; Martinez, Nerea; Dilisio, Lorena; Casado, Felipe; Cruz, Miguel A; Algara, Patrocinio; Piris, Miguel A; Mollejo, Manuela

    2013-07-01

    Splenic marginal zone lymphoma is a small B-cell neoplasm whose molecular pathogenesis is still essentially unknown and whose differentiation from other small B-cell lymphomas is hampered by the lack of specific markers. We have analyzed the gene expression and miRNA profiles of 31 splenic marginal zone lymphoma cases. For comparison, 7 spleens with reactive lymphoid hyperplasia, 10 spleens infiltrated by chronic lymphocytic leukemia, 12 spleens with follicular lymphoma, 6 spleens infiltrated by mantle cell lymphoma and 15 lymph nodes infiltrated by nodal marginal zone lymphoma were included. The results were validated by qRT-PCR in an independent series including 77 paraffin-embedded splenic marginal zone lymphomas. The splenic marginal zone lymphoma miRNA signature had deregulated expression of 51 miRNAs. The most highly overexpressed miRNAs were miR-155, miR-21, miR-34a, miR-193b and miR-100, while the most repressed miRNAs were miR-377, miR-27b, miR-145, miR-376a and miR-424. MiRNAs located in 14q32-31 were underexpressed in splenic marginal zone lymphoma compared with reactive lymphoid tissues and other B-cell lymphomas. Finally, the gene expression data were integrated with the miRNA profile to identify functional relationships between genes and deregulated miRNAs. Our study reveals miRNAs that are deregulated in splenic marginal zone lymphoma and identifies new candidate diagnostic molecules for splenic marginal zone lymphoma.

  18. Nonrhabdomyosarcoma soft tissue sarcoma (NRSTS) in pediatric and young adult patients: Results from a prospective study using limited-margin radiotherapy.

    Science.gov (United States)

    Tinkle, Christopher L; Fernandez-Pineda, Israel; Sykes, April; Lu, Zhaohua; Hua, Chia-Ho; Neel, Michael D; Bahrami, Armita; Shulkin, Barry L; Kaste, Sue C; Pappo, Alberto; Spunt, Sheri L; Krasin, Matthew J

    2017-11-15

    Indications for and delivery of adjuvant therapies for pediatric nonrhabdomyosarcoma soft tissue sarcoma (NRSTS) have been derived largely from adult studies; therefore, significant concern remains regarding radiation exposure to normal tissue. The authors report long-term treatment outcomes and toxicities for pediatric and young adult patients with high-grade NRSTS who were treated on a prospective trial using limited-margin radiotherapy. Sixty-two patients (ages 3-22 years) with predominantly high-grade NRSTS requiring radiation were treated on a phase 2 institutional study of conformal external-beam radiotherapy and/or brachytherapy using a 1.5-cm to 2-cm anatomically constrained margin. The estimated cumulative incidence of local failure, Gray's method estimated cumulative incidence of local failure, Kaplan-Meier method estimated survival, competing-risk regression model determined predictors of disease outcome, and toxicity was reported according to CTCAE v2.0. At a median follow-up of 5.1 years (range, 0.2-10.9 years), 9 patients had experienced local failure. The 5-year overall cumulative incidence of local failure was 14.8% (95% confidence interval [CI], 7.2%-25%), and all but 1 local failure occurred outside the highest-dose irradiation volume. The 5-year Kaplan-Meier estimates for event-free and overall survival were 49.3% (95% CI, 36.3%-61.1%) and 67.9% (95% CI, 54.2%-78.3%), respectively. Multivariable analysis indicated that younger age was the only independent predictor of local recurrence (P = .004). The 5-year cumulative incidence of grade 3 or 4 late toxicity was 15% (95% CI, 7.2%-25.3%). The delivery of limited-margin radiotherapy using conformal external-beam radiotherapy or brachytherapy provides a high rate of local tumor control without an increase in marginal failures and with acceptable treatment-related morbidity. Cancer 2017;123:4419-29. © 2017 American Cancer Society. © 2017 American Cancer Society.

  19. 17 CFR 41.47 - Withdrawal of margin.

    Science.gov (United States)

    2010-04-01

    ... PRODUCTS Customer Accounts and Margin Requirements § 41.47 Withdrawal of margin. (a) By the customer... positions in the account under this Regulation (Subpart E, §§ 41.42 through 41.49). (b) By the security...) Interest charged on credit maintained in the account; (3) Communication or shipping charges with respect to...

  20. Double-sided Moral Hazard and Margin-based Royalty

    OpenAIRE

    NARIU, Tatsuhiko; UEDA, Kaoru; LEE, DongJoon

    2009-01-01

    This paper analyzes royalty modes in the franchise arrangements of convenience stores under double-sided moral hazard. In Japan, the majority of franchisors charge margin-based royalties based on net margins rather than sales-based royalties based on sales. We show that the franchisor can attain the first-best outcome by adopting margin-based royalties under double-sided moral hazard. We consider a case where a franchisee sells two kinds of goods; one is shipped from its franchisor and the ot...

  1. Challenges in process marginality for advanced technology nodes and tackling its contributors

    Science.gov (United States)

    Narayana Samy, Aravind; Schiwon, Roberto; Seltmann, Rolf; Kahlenberg, Frank; Katakamsetty, Ushasree

    2013-10-01

    Process margin is getting critical in the present node shrinkage scenario due to the physical limits reached (Rayleigh's criterion) using ArF lithography tools. K1 is used to its best for better resolution and to enhance the process margin (28nm metal patterning k1=0.31). In this paper, we would like to give an overview of various contributors in the advanced technology nodes which limit the process margins and how the challenges have been tackled in a modern foundry model. Advanced OPC algorithms are used to make the design content at the mask optimum for patterning. However, as we work at the physical limit, critical features (Hot-spots) are very susceptible to litho process variations. Furthermore, etch can have a significant impact as well. Pattern that still looks healthy at litho can fail due to etch interactions. This makes the traditional 2D contour output from ORC tools not able to predict accurately all defects and hence not able to fully correct it in the early mask tapeout phase. The above makes a huge difference in the fast ramp-up and high yield in a competitive foundry market. We will explain in this paper how the early introduction of 3D resist model based simulation of resist profiles (resist top-loss, bottom bridging, top-rounding, etc.,) helped in our prediction and correction of hot-spots in the early 28nm process development phase. The paper also discusses about the other overall process window reduction contributors due to mask 3D effects, wafer topography (focus shifts/variations) and how this has been addressed with different simulation efforts in a fast and timely manner.

  2. Human Traffic: The Fashionably and Unfashionably Marginalized in the Korean Cultural Context

    Directory of Open Access Journals (Sweden)

    Dustin Hellberg

    2017-02-01

    Full Text Available This article will propose the novel terms "fashionably marginalized" and "unfashionably marginalized" to outline particular limits of description in cultural studies (broadly defined of topics that are more easily and less easily discussed through the predominant vocabulary of the Humanities. This is not an attack on the aims of cultural studies and theorists. Instead, it will help to identify marginalized groups whose cause and advocacy require more consilient, interdisciplinary involvement to intersect public policy, theoretical discourse and media coverage in order to assist or give voice to groups of people who themselves may not have the means or wherewithal to address their own plight in the public sphere. We will outline the case of Korean elderly recycling collectors and how the academy has largely ignored them, despite the fact that they comprise a significant percentage of the Korean population. Then we will contrast them with two other marginalized groups, Korean shamans and the Korean LGBT community, groups which the academy has paid much more attention to, despite being smaller in demographics. We will use these contrasting groups as unfashionably and fashionably marginalized examples. We hope to demonstrate how the adoption of cultural theory’s vocabulary in the Korean academy illustrates areas where cultural theory may fall short of its proposed goals as a symptom of the broader tendency in the Humanities.

  3. Cost reduction by using micro-fingers in thin film silicon modules

    Energy Technology Data Exchange (ETDEWEB)

    Slooff, L.H.; Bosman, J.; Loffler, J.; Budel, T. [ECN Solar Energy, Petten (Netherlands)

    2013-06-15

    A finite element electrical model is described that can be used to calculate the performance of monolithic thin film photovoltaic modules. The model is suitable for all type of thin film modules, like e.g. p-i-n a-Si:H, CIGS and polymer based modules and it includes losses due to interconnection. Using this model a parameter study is performed for a-Si:H cells with the aim to reduce metal consumption in the cell and interconnection. It is shown that a reduction in metal consumption by a factor 1.3 can be achieved with only marginal loss in performance if short cell are used with very short fingers.

  4. Feasibility of Using the Marginal Blood Vessels as Reference Landmarks for CT Colonography

    Science.gov (United States)

    Wei, Zhuoshi; Yao, Jianhua; Wang, Shijun; Liu, Jiamin; Dwyer, Andrew J.; Pickhardt, Perry J.; Nowinski, Wieslaw L.; Summers, Ronald M.

    2015-01-01

    OBJECTIVE The purpose of this study was to show the spatial relationship of the colonic marginal blood vessels and the teniae coli on CT colonography (CTC) and the use of the marginal blood vessels for supine-prone registration of polyps and for determination of proper connectivity of collapsed colonic segments. MATERIALS AND METHODS We manually labeled the marginal blood vessels on 15 CTC examinations. Colon segmentation, centerline extraction, teniae detection, and teniae identification were automatically performed. For assessment of their spatial relationships, the distances from the marginal blood vessels to the three teniae coli and to the colon were measured. Student t tests (paired, two-tailed) were performed to evaluate the differences among these distances. To evaluate the reliability of the marginal vessels as reference points for polyp correlation, we analyzed 20 polyps from 20 additional patients who underwent supine and prone CTC. The average difference of the circumferential polyp position on the supine and prone scans was computed. Student t tests (paired, two-tailed) were performed to evaluate the supine-prone differences of the distance. We performed a study on 10 CTC studies from 10 patients with collapsed colonic segments by manually tracing the marginal blood vessels near the collapsed regions to resolve the ambiguity of the colon path. RESULTS The average distances (± SD) from the marginal blood vessels to the tenia mesocolica, tenia omentalis, and tenia libera were 20.1 ± 3.1 mm (95% CI, 18.5–21.6 mm), 39.5 ± 4.8 mm (37.1–42.0 mm), and 36.9 ± 4.2 mm (34.8–39.1 mm), respectively. Pairwise comparison showed that these distances to the tenia libera and tenia omentalis were significantly different from the distance to the tenia mesocolica (p marginal blood vessels to the colon wall was 15.3 ± 2.0 mm (14.2–16.3 mm). For polyp localization, the average difference of the circumferential polyp position on the supine and prone scans was 9

  5. WE-AB-207B-09: Margin Reduction for Planning Target Volume (PTV) in Patients with Localized Prostate Cancer: Impact On Delivered Dose and Quality of Life

    Energy Technology Data Exchange (ETDEWEB)

    Kumarasiri, A; Liu, C; Brown, S; Glide-Hurst, C; Elshaikh, M; Chetty, I; Movsas, B [Henry Ford Health System, Detroit, MI (United States)

    2016-06-15

    Purpose: To estimate the delivered (cumulative) dose to targets and organs at risk for localized prostate cancer patients treated with reduced PTV margins and to evaluate preliminary patient reported quality-of-life (QOL). Methods: Under an IRB-approved protocol, 20 prostate cancer patients (including 11 control patients) were treated with reduced planning margins (5 mm uniform with 4 mm at prostate/rectum interface). Control patients had standard margin (10/6 mm)-based treatments. A parameter-optimized Elastix algorithm along with energy-mass mapping was used to deform and resample dose of the day onto the planning CT for each fraction to estimate the delivered dose over all fractions. QOL data were collected via Expanded Prostate cancer Index Composite (EPIC-26) questionnaires at time points pre-treatment, post-treatment, and at 2, 6, 12, 18 month follow-ups. Standardized QOL scores [range: 0–100] were determined and baseline-corrected by subtracting pre-treatment QOL data. Mean QOL differences between the margin reduced group and control group (QOLmr-QOLcontrol) were calculated for first 18 months. Results: The difference between the cumulative mean dose (Dmean) and the planned mean dose (±SD) for PTV, prostate, bladder, and rectum were −2.2±1.0, 0.3±0.5, −0.7±2.6, and −2.1±1.3 Gy respectively for the margin-reduced group, and −0.8±2.0, 0.9±1.4, - 0.7±3.1 and −1.0±2.4 Gy for the control group. Difference between the two groups was statistically insignificant (p=0.1). Standardized and baseline corrected QOLmr-QOLcontrol for EPIC domains categorized as “Urinary Incontinence”, “Urinary Irritative/Obstructive”, “Bowel”, “Sexual”, and “Hormonal” were 0.6, 12.1, 9.1, 13.3, and −0.9 for the 18 months following radiation therapy (higher values better). Delivered dose to rectum showed a weak correlation to “Bowel” domain (Pearson’s coefficient −0.24, p<0.001), while bladder dose did not correlate to Urinary Incontinence

  6. WE-AB-207B-09: Margin Reduction for Planning Target Volume (PTV) in Patients with Localized Prostate Cancer: Impact On Delivered Dose and Quality of Life

    International Nuclear Information System (INIS)

    Kumarasiri, A; Liu, C; Brown, S; Glide-Hurst, C; Elshaikh, M; Chetty, I; Movsas, B

    2016-01-01

    Purpose: To estimate the delivered (cumulative) dose to targets and organs at risk for localized prostate cancer patients treated with reduced PTV margins and to evaluate preliminary patient reported quality-of-life (QOL). Methods: Under an IRB-approved protocol, 20 prostate cancer patients (including 11 control patients) were treated with reduced planning margins (5 mm uniform with 4 mm at prostate/rectum interface). Control patients had standard margin (10/6 mm)-based treatments. A parameter-optimized Elastix algorithm along with energy-mass mapping was used to deform and resample dose of the day onto the planning CT for each fraction to estimate the delivered dose over all fractions. QOL data were collected via Expanded Prostate cancer Index Composite (EPIC-26) questionnaires at time points pre-treatment, post-treatment, and at 2, 6, 12, 18 month follow-ups. Standardized QOL scores [range: 0–100] were determined and baseline-corrected by subtracting pre-treatment QOL data. Mean QOL differences between the margin reduced group and control group (QOLmr-QOLcontrol) were calculated for first 18 months. Results: The difference between the cumulative mean dose (Dmean) and the planned mean dose (±SD) for PTV, prostate, bladder, and rectum were −2.2±1.0, 0.3±0.5, −0.7±2.6, and −2.1±1.3 Gy respectively for the margin-reduced group, and −0.8±2.0, 0.9±1.4, - 0.7±3.1 and −1.0±2.4 Gy for the control group. Difference between the two groups was statistically insignificant (p=0.1). Standardized and baseline corrected QOLmr-QOLcontrol for EPIC domains categorized as “Urinary Incontinence”, “Urinary Irritative/Obstructive”, “Bowel”, “Sexual”, and “Hormonal” were 0.6, 12.1, 9.1, 13.3, and −0.9 for the 18 months following radiation therapy (higher values better). Delivered dose to rectum showed a weak correlation to “Bowel” domain (Pearson’s coefficient −0.24, p<0.001), while bladder dose did not correlate to Urinary Incontinence

  7. Seismic margin reviews of nuclear power plants: Identification of important functions and systems

    International Nuclear Information System (INIS)

    Prassinos, P.G.; Moore, D.L.; Amico, P.J.

    1987-01-01

    The results from the review of the seven utility-sponsored seismic PRAs plus the Zion SSMRP have been used to develop some insights regarding the importance of various systems and functions to seismic margins. By taking this information and combining it with the fragility insights we can develop some functional/systemic screening guideline for margin studies. This screening approach will greatly reduce the scope of the analysis. It is possible only to come to conclusions regarding the importance of plant systems and safety functions for PWRs, for which six plants were studied. For PWRs, it is possible to categorize plant safety functions as belonging to one of two groups, one of which is important to the assessment of seismic margins and one of which is not. The important functional group involves only two functions that must be considered for estimating seismic margin. These two functions are shutting down the nuclear reaction and providing cooling to the reactor core in the time period immediately following the seismic event (that is, the injection phase or pre-residual heat removal time period). It is possible to reasonably estimate the seismic margin of the plant by performing a study only involving the analysis of the plant systems and structure which are required in order to perform the two functions. Such analysis must include an assessment of a complete set of seismic initiating events. (orig./HP)

  8. Primary cutaneous marginal zone B-cell lymphoma: clinical and histological aspects.

    Science.gov (United States)

    Khaled, A; Sassi, S; Fazaa, B; Ben Hassouna, J; Ben Romdhane, K; Kamoun, M R

    2009-02-01

    According to the WHO-EORTC classification of cutaneous lymphomas, primary cutaneous marginal zone B-cell lymphoma are now well characterized. We report here a case of primary cutaneous marginal zone B-cell lymphoma in a 51 year-old man in which the diagnosis was made using both histology and immunopathology. The patient had no remarkable medical history, no history of either acute inflammation or insect bite, and presented with a 5 cm solitary asymptomatic erythematous firm, multinodular and infiltrated plaque on the back for 12 months. Histological examination and immunohistochemical study of a cutaneous biopsy provided a differential diagnosis between B cell lymphoma and lymphocytoma cutis. Full body work up revealed no signs of extracutaneous dissemination. The patient underwent surgical excision of the nodule. Histological examination showed a histological and immunophenotyping profile typical of primary cutaneous marginal zone B-cell lymphoma. The lesion was completely excised with clear margins and no recurrence occurred after a 12 month-follow-up period. Primary cutaneous marginal zone B-cell lymphoma are low-grade lymphomas that have an indolent course and a high tendency to recur. They should be differentiated from lymphocytoma cutis and from the other types of cutaneous B cell lymphomas that have a different course and prognosis.

  9. Significance and management of positive surgical margins at the time of radical prostatectomy.

    Science.gov (United States)

    Silberstein, Jonathan L; Eastham, James A

    2014-10-01

    Positive surgical margins (PSM) at the time of radical prostatectomy (RP) result in an increased risk of biochemical recurrence (BCR) and secondary treatment. We review current literature with a focus on stratifying the characteristics of the PSM that may define its significance, the impact of modern imaging and surgical approaches in avoidance of PSM, and management strategies when PSM do occur. We performed a review of the available literature to identify factors associated with PSM and their management. PSM have been repeatedly demonstrated to be associated with an increased risk of BCR following RP. The specific characteristics (size, number, location, Gleason score at the margin) of the PSM may influence the risk of recurrence. Novel imaging and surgical approaches are being investigated and may allow for reductions of PSM in the future. The use of adjuvant treatment for a PSM remains controversial and should be decided on an individual basis after a discussion about the risks and benefits. The goal of RP is complete resection of the tumor. PSM are associated with increased risk of BCR and secondary treatments. Of the risk factors associated with BCR after RP, a PSM is directly influenced by surgical technique.

  10. Significance and management of positive surgical margins at the time of radical prostatectomy

    Directory of Open Access Journals (Sweden)

    Jonathan L. Silberstein

    2014-01-01

    Full Text Available Positive surgical margins (PSM at the time of radical prostatectomy (RP result in an increased risk of biochemical recurrence (BCR and secondary treatment. We review current literature with a focus on stratifying the characteristics of the PSM that may define its significance, the impact of modern imaging and surgical approaches in avoidance of PSM, and management strategies when PSM do occur. We performed a review of the available literature to identify factors associated with PSM and their management. PSM have been repeatedly demonstrated to be associated with an increased risk of BCR following RP. The specific characteristics (size, number, location, Gleason score at the margin of the PSM may influence the risk of recurrence. Novel imaging and surgical approaches are being investigated and may allow for reductions of PSM in the future. The use of adjuvant treatment for a PSM remains controversial and should be decided on an individual basis after a discussion about the risks and benefits. The goal of RP is complete resection of the tumor. PSM are associated with increased risk of BCR and secondary treatments. Of the risk factors associated with BCR after RP, a PSM is directly influenced by surgical technique.

  11. The Effect of Various Finish Line Configurations on the Marginal Seal and Occlusal Discrepancy of Cast Full Crowns After Cementation - An In-vitro Study.

    Science.gov (United States)

    Nemane, Vaishali; Akulwar, Ravikumar Suryakanth; Meshram, Suresh

    2015-08-01

    The marginal fit of crowns is of clinical importance. It is found that marginal and occlusal discrepancies are commonly increased following cementation. The resistance of cementing materials is a factor that prevents cast restorations from being correctly seated. Different finish lines behave differently in facilitating the escape of the cement. When the escape path of the cement decreases, the crown fails to seat further. This study was planned with an aim to evaluate the effect of various finish lines on the marginal seal and occlusal seat of full crown preparations. Six stainless steel metal dies were machined to simulate molar crown preparations. The diameter was 10 mm and height was 6mm. The occlusal surface was kept flat and a small circular dimple was machined for reorientation of the wax pattern and metal copings, margins of various designs were machined accurately. The margins prepared were Group A- 90(0)C shoulder, Group B- Rounded shoulder, Group C- 45 degree sloped shoulder, Group D- Chamfer, Group E- Long chamfer, Group F- Feather edge. Full cast metal crowns of base metal alloy were fabricated over the metal dies. Zinc phosphate luting cement was used for the cementation. After twenty four hours, the cemented crown and die assembly were embedded in clear acrylic resin so as to hold the assembly together while sectioning. Twenty four hours later, all the samples were sectioned sagitally. The sectioned halves were focused under a stereomicroscope and the cement spaces were measured to the nearest micron. The cement thickness was measured at two points on the occlusal surface and one at each margin. Significant differences were observed in the occlusal seat and marginal seal of all the finish line configurations. The rounded shoulder had the best occlusal seat, followed by 90(0)C shoulder. The occlusal seat and marginal seal afforded by the shoulder finish lines were similar whereas there was a vast difference in the seating and sealing of long chamfer

  12. Evaluation of reactivity shutdown margin for nuclear fuel reload optimization

    International Nuclear Information System (INIS)

    Engrand, P.; Wong, H. I.; Maldonado, G.I.

    1996-01-01

    The FORMOSA-P code is a nuclear fuel management optimization package which combines simulated annealing (SA) and nodal generalized perturbation theory (GPT). Recent studies at Electricite de France have produced good results for power peaking minimizations under multiple limiting control rod configurations. However, since the reactivity shutdown margin is not explicitly treated as an objective or constraint function, then any optimal loading patterns (LPs) are not guaranteed to yield an adequate shutdown margin (SDM). This study describes the implementation of the SDM calculation within a FORMOSA-P optimization. Maintaining all additional computational requirements to a minimum was a key consideration. (authors). 4 refs., 2 figs

  13. Hydrate studies of northern Cascadia margin off Vancouver Island : a reference source

    Energy Technology Data Exchange (ETDEWEB)

    Hyndman, R. [Natural Resources Canada, Sidney, BC (Canada). Geological Survey of Canada, Pacific Geoscience Centre]|[Victoria Univ., BC (Canada). School of Earth and Ocean Sciences; Riedel, M. [McGill Univ., Montreal, PQ (Canada). Dept. of Earth and Planetary Sciences; Spence, G.D. [Victoria Univ., BC (Canada). School of Earth and Ocean Sciences

    2008-07-01

    Extensive geophysical studies have been conducted to determine the occurrence, distribution, and concentration of gas hydrate in the Cascadia subduction zone off western Canada. In this paper, the authors compiled a comprehensive reference list of studies involving marine natural gas hydrate surveys and studies on the northern Cascadia margin. The reference categories included general reviews; regional tectonic framework for northern Cascadia hydrate; prism sediment thickening, fluid expulsion and hydrate formation; and, seismic surveys. This paper first addressed the local tectonics and the sedimentary accretionary prism in which the hydrate forms, followed by a description of the geophysical and geological surveys that have been conducted. The surveys included a wide range of seismic surveys such as multichannel, ocean-bottom, high-resolution single channel and very high resolution deep towed surveys. Heat flow, electrical sounding, seafloor compliance, sediment coring, and mapping gas plumes from the seafloor were among the other geophysical studies listed in this paper. The conclusions that have resulted from this work in terms of distribution, concentrations and amounts of hydrate were presented along with a discussion on the process of hydrate formation and dissociation. 96 refs., 3 figs.

  14. Time Safety Margin: Theory and Practice

    Science.gov (United States)

    2016-09-01

    Air Education and Training Command Handbook 99-107, T-38 Road to Wings, Randolph Air Force Base, Texas, July 2013. 65 This page was intentionally left...412TW-TIH-16-01 TIME SAFETY MARGIN: THEORY AND PRACTICE WILLIAM R. GRAY, III Chief Test Pilot USAF Test Pilot School SEPTEMBER 2016... Safety Margin: The01y and Practice) was submitted by the Commander, 4 I 2th Test Wing, Edwards AFB, Ca lifornia 93524-6843. Foreign announcement and

  15. Three-dimensional and topographic relationships between the orbital margins with reference to assessment of eyeball protrusion.

    Science.gov (United States)

    Shin, Kang-Jae; Lee, Shin-Hyo; Koh, Ki-Seok; Song, Wu-Chul

    2017-03-01

    This study investigated the topographic relationships among the eyeball and four orbital margins with the aim of identifying the correlation between orbital geometry and eyeball protrusion in Koreans. Three-dimensional (3D) volume rendering of the face was performed using serial computed-tomography images of 141 Koreans, and several landmarks on the bony orbit and the cornea were directly marked on the 3D volumes. The anterior-posterior distances from the apex of the cornea to each orbital margin and between the orbital margins were measured in both eyes. The distances from the apex of the cornea to the superior, medial, inferior, and lateral orbital margins were 5.8, 5.8, 12.0, and 17.9 mm, respectively. Differences between sides were observed in all of the orbital margins, and the distances from the apex of the cornea to the superior and inferior orbital margins were significantly greater in females than in males. The anterior-posterior distance between the superior and inferior orbital margins did not differ significantly between males (6.3 mm) and females (6.2 mm). The data obtained in this study will be useful when developing practical guidelines applicable to forensic facial reconstruction and orbitofacial surgeries.

  16. 2-cm versus 4-cm surgical excision margins for primary cutaneous melanoma thicker than 2 mm: a randomised, multicentre trial

    DEFF Research Database (Denmark)

    Gillgren, Peter; Drzewiecki, Krzysztof T; Niin, Marianne

    2011-01-01

    Optimum surgical resection margins for patients with clinical stage IIA-C cutaneous melanoma thicker than 2 mm are controversial. The aim of the study was to test whether survival was different for a wide local excision margin of 2 cm compared with a 4-cm excision margin.......Optimum surgical resection margins for patients with clinical stage IIA-C cutaneous melanoma thicker than 2 mm are controversial. The aim of the study was to test whether survival was different for a wide local excision margin of 2 cm compared with a 4-cm excision margin....

  17. Benefit–cost analysis of non-marginal climate and energy projects

    International Nuclear Information System (INIS)

    Dietz, Simon; Hepburn, Cameron

    2013-01-01

    Conventional benefit–cost analysis incorporates the normally reasonable assumption that the policy or project under examination is marginal. Among the assumptions this entails is that the policy or project is small, so the underlying growth rate of the economy does not change. However, this assumption may be inappropriate in some important circumstances, including in climate-change and energy policy. One example is global targets for carbon emissions, while another is a large renewable energy project in a small economy, such as a hydropower dam. This paper develops some theory on the evaluation of non-marginal projects, with empirical applications to climate change and energy. We examine the conditions under which evaluation of a non-marginal project using marginal methods may be wrong, and in our empirical examples we show that both qualitative and large quantitative errors are plausible. - Highlights: • This paper develops the theory of the evaluation of non-marginal projects. • It also includes empirical applications to climate change and energy. • We show when evaluation of a non-marginal project using marginal methods is wrong

  18. Image-guided radiotherapy of bladder cancer: bladder volume variation and its relation to margins

    DEFF Research Database (Denmark)

    Muren, Ludvig; Redpath, Anthony Thomas; Lord, Hannah

    2007-01-01

    : The correlation between the relative bladder volume (RBV, defined as repeat scan volume/planning scan volume) and the margins required to account for internal motion was first studied using a series of 20 bladder cancer patients with weekly repeat CT scanning during treatment. Both conformal RT (CRT) and IGRT......BACKGROUND AND PURPOSE: To control and account for bladder motion is a major challenge in radiotherapy (RT) of bladder cancer. This study investigates the relation between bladder volume variation and margins in conformal and image-guided RT (IGRT) for this disease. MATERIALS AND METHODS...... these patients were given fluid intake restrictions on alternating weeks during treatment. RESULTS: IGRT gave the strongest correlation between the RBV and margin size (R(2)=0.75; p10mm were required in only 1% of the situations when the RBV1, whereas isotropic margins >10...

  19. 30 CFR 204.3 - What alternatives are available for marginal properties?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What alternatives are available for marginal... MINERALS REVENUE MANAGEMENT ALTERNATIVES FOR MARGINAL PROPERTIES General Provisions § 204.3 What alternatives are available for marginal properties? If you have production from a marginal property, MMS and...

  20. Experimental study and large eddy simulation of effect of terrain slope on marginal burning in shrub fuel beds

    Science.gov (United States)

    Xiangyang Zhou; Shankar Mahalingam; David Weise

    2007-01-01

    This paper presents a combined study of laboratory scale fire spread experiments and a three-dimensional large eddy simulation (LES) to analyze the effect of terrain slope on marginal burning behavior in live chaparral shrub fuel beds. Line fire was initiated in single species fuel beds of four common chaparral plants under various fuel bed configurations and ambient...

  1. Margination of Stiffened Red Blood Cells Regulated By Vessel Geometry.

    Science.gov (United States)

    Chen, Yuanyuan; Li, Donghai; Li, Yongjian; Wan, Jiandi; Li, Jiang; Chen, Haosheng

    2017-11-10

    Margination of stiffened red blood cells has been implicated in many vascular diseases. Here, we report the margination of stiffened RBCs in vivo, and reveal the crucial role of the vessel geometry in the margination by calculations when the blood is seen as viscoelastic fluid. The vessel-geometry-regulated margination is then confirmed by in vitro experiments in microfluidic devices, and it establishes new insights to cell sorting technology and artificial blood vessel fabrication.

  2. Marginal adaptation of four inlay casting waxes on stone, titanium, and zirconia dies.

    Science.gov (United States)

    Michalakis, Konstantinos X; Kapsampeli, Vassiliki; Kitsou, Aikaterini; Kirmanidou, Yvone; Fotiou, Anna; Pissiotis, Argirios L; Calvani, Pasquale Lino; Hirayama, Hiroshi; Kudara, Yukio

    2014-07-01

    Different inlay casting waxes do not produce copings with satisfactory marginal accuracy when used on different die materials. The purpose of this study was to evaluate the marginal accuracy of 4 inlay casting waxes on stone dies and titanium and zirconia abutments and to correlate the findings with the degree of wetting between the die specimens and the inlay casting waxes. The inlay casting waxes tested were Starwax (Dentaurum), Unterziehwachs (Bredent), SU Esthetic wax (Schuler), and Sculpturing wax (Renfert). The marginal opening of the waxes was measured with a stereomicroscope on high-strength stone dies and on titanium and zirconia abutments. Photographic images were obtained, and the mean marginal opening for each specimen was calculated. A total of 1440 measurements were made. Wetting between die materials and waxes was determined after fabricating stone, titanium, and zirconia rectangular specimens. A calibrated pipette was used to place a drop of molten wax onto each specimen. The contact angle was calculated with software after an image of each specimen had been made with a digital camera. Collected data were subjected to a 2-way analysis of variance (α=.05). Any association between marginal accuracy and wetting of different materials was found by using the Pearson correlation. The wax factor had a statistically significant effect both on the marginal discrepancy (F=158.31, P<.001) and contact angle values (F=68.09, P<.001). A statistically significant effect of the die material factor both on the marginal adaptation (F=503.47, P<.001) and contact angle values (F=585.02, P<.001) was detected. A significant correlation between the marginal accuracy and the contact angle values (Pearson=0.881, P=.01) was also found. Stone dies provided wax copings with the best marginal integrity, followed by titanium and zirconia abutments. Unterziehwachs (Bredent), wax produced the best marginal adaptation on different die materials. A significant correlation was found

  3. Marginal zone in femoral head avascular necrosis: scintigraphic characteristics and clinical prognostic value

    International Nuclear Information System (INIS)

    Milcinski, M.; Sedonja, I.; Dolinar, D.; Jevtic, V.

    2002-01-01

    Aim: Marginal zone, seen on magnetic resonance imaging (MRI) in femoral head avascular necrosis, consists of granulation tissue and sclerosis at the junction of necrotic and normal bone. Prognostic value of this finding is not clear. Aim of our study was to evaluate osteoblastic activity of marginal zone with bone scintigraphy and to assess prognostic importance of marginal zone for further evolution of femoral head necrosis. Material and methods: MRI was performed in 37 hips in 26 patients (17 m, 9 f, 20-64 y, mean 42,9 y) with Ficat 0-II avascular necrosis (SE T1W, STIR and SE T1W FAT.SAT after Gd DTPA in the coronal plane and GE FLASH in the sagittal plane). In 26 hips of 17 patients planar and pinhole scintigraphy with 99mTc-DPD was performed. Results: On MRI, marginal zone divided necrotic and normal bone in 26/37 (70,3%) hips, in 14/26 it was thin (2% of femoral head diameter or less), but in 12/26 it was wide (more than 2% of femoral head diameter). In 11/37 (29,7%) hips marginal zone was not seen. Pinhole scintigraphy was performed in 26 hips; in all 10/10 (100%) hips with wide marginal zone, seen on MRI, increased osteoblastic activity was detected, while only in 1/9 (11,1%) hips with thin marginal zone on MRI osteoblastic activity was increased. Patients were followed 1 to 5 years (mean 2,2 y). In hips without marginal zone no collapse of femoral head was seen until now, in 2/11 (18,2%) femoral heads MRI and clinical regression was observed. Ten of 12 lesions with wide marginal zone (83,3 %) collapsed 0,25 to 2,5 (mean 1) years after onset of pain. Two of 12 lesions with wide marginal zone (16,7%) have not collapsed until now. From lesions with thin marginal zone, 4/14 (28,6 %) collapsed 0,7 to 3 (mean 1,9) years after onset of pain, 10/14 (71,4%) did not collapse until now. Conclusion: Increased osteoblastic activity in wide marginal zone between necrotic and vital bone in hip avascular necrosis is bad prognostic factor for femoral head collapse

  4. Evaluation of seismic margins for an in-plant piping system

    International Nuclear Information System (INIS)

    Kot, C.A.; Srinivasan, M.G.; Hsieh, B.J.

    1991-01-01

    Earthquake experience as well as experiments indicate that, in general, piping systems are quite rugged in resisting seismic loadings. Therefore there is a basis to hold that the seismic margin against pipe failure is very high for systems designed according to current practice. However, there is very little data, either from tests or from earthquake experience, on the actual margin or excess capacity (against failure from seismic loading) of in-plant piping systems. Design of nuclear power plant piping systems in the US is governed by the criteria given in the ASME Boiler and Pressure Vessel (B ampersand PV) Code, which assure that pipe stresses are within specified allowable limits. Generally linear elastic analytical methods are used to determine the stresses in the pipe and forces in pipe supports. The objective of this study is to verify that piping designed according to current practice does indeed have a large margin against failure and to quantify the excess capacity for piping and dynamic pipe supports on the basis of data obtained in a series of high-level seismic experiments (designated SHAM) on an in-plant piping system at the HDR (Heissdampfreaktor) Test Facility in Germany. Note that in the present context, seismic margin refers to the deterministic excess capacities of piping or supports compared to their design capacities. The excess seismic capacities or margins of a prototypical in-plant piping system and its components are evaluated by comparing measured inputs and responses from high-level simulated seismic experiments with design loads and allowables. Large excess capacities are clearly demonstrated against pipe and overall system failure with the lower bound being about four. For snubbers the lower bound margin is estimated at two and for rigid strut supports at five. 4 refs., 2 figs., 2 tabs

  5. Can minor fruit cultivation change the livelihood of the marginal peasants? A case study from Bangladesh

    Directory of Open Access Journals (Sweden)

    Kabir M.S.

    2016-01-01

    Full Text Available Lemon (lebu cultivation, a minor fruit production activity, is increasingly becoming popular among the marginal peasants. The present study aimed at exploring the potentials of lemon production and its impact on the changes in the livelihood pattern of the rural farmers as well as its impact on women empowerment. Based on qualitative and quantitative data collected from Mymensingh district in Bangladesh in 2015, this paper argues that life and livelihood of the citrus producer has significantly changed over the last decade. Income from the sale of lemon is the principal livelihood means and gender non-differentiated participation in the production process further enhanced the sustainability of the livelihoods. It also contributed to employment generation for those who are not directly involved in the lemon cultivation such as power tiller driver, irrigation pump driver, fertilizer & pesticide retailer, small lemon collector, lemon supplier in the study area. Moreover, increased participation of women in the citrus cultivation has changed not only their economic well-being but also social status, honor, planning and decision making power, and self-esteem. This study also shows that marginal and vulnerable poor women including landless women, female member of women headed household and widows significantly benefited from citrus cultivation. Yet, lack of cooperative society, financial support, credit facility, technical support, storage facility and marketing support are identified as the potential problems to achieve a sustainable growth of lemon production activity.

  6. Magmatic Complexes of the Vetlovaya Marginal Sea Paleobasin (Kamchatka): Composition and Geodynamic Setting

    Science.gov (United States)

    Tsukanov, N. V.; Saveliev, D. P.; Kovalenko, D. V.

    2018-01-01

    This study presents new geochemical and isotope data on igneous rocks of the Vetlovaya marginal sea paleobasin (part of the Late Mesozoic-Cenozoic margin of the northwestern Pacific). The results show that the rock complexes of this marginal sea basin comprise igneous rocks with geochemical compositions similar to those of normal oceanic tholeiites, enriched transitional tholeiites, and ocean island and back-arc basin basalts. Island-arc tholeiitic basalts are present only rarely. The specific geochemical signatures of these rocks are interpreted as being related to mantle heterogeneity and the geodynamic conditions in the basin.

  7. Variability of the geothermal gradient across two differently aged magma-rich continental rifted margins of the Atlantic Ocean: the Southwest African and the Norwegian margins

    Directory of Open Access Journals (Sweden)

    E. Gholamrezaie

    2018-02-01

    Full Text Available The aim of this study is to investigate the shallow thermal field differences for two differently aged passive continental margins by analyzing regional variations in geothermal gradient and exploring the controlling factors for these variations. Hence, we analyzed two previously published 3-D conductive and lithospheric-scale thermal models of the Southwest African and the Norwegian passive margins. These 3-D models differentiate various sedimentary, crustal, and mantle units and integrate different geophysical data such as seismic observations and the gravity field. We extracted the temperature–depth distributions in 1 km intervals down to 6 km below the upper thermal boundary condition. The geothermal gradient was then calculated for these intervals between the upper thermal boundary condition and the respective depth levels (1, 2, 3, 4, 5, and 6 km below the upper thermal boundary condition. According to our results, the geothermal gradient decreases with increasing depth and shows varying lateral trends and values for these two different margins. We compare the 3-D geological structural models and the geothermal gradient variations for both thermal models and show how radiogenic heat production, sediment insulating effect, and thermal lithosphere–asthenosphere boundary (LAB depth influence the shallow thermal field pattern. The results indicate an ongoing process of oceanic mantle cooling at the young Norwegian margin compared with the old SW African passive margin that seems to be thermally equilibrated in the present day.

  8. Malignant-looking thyroid nodules with size reduction: Core needle biopsy results

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ha Young; Baek, Jung Hwan; Ha, Eun Jun; Park, Jee Won; Lee, Jeong Hyun; Song, Dong Eun; Shong, Young Kee [Asan Medical Center, University of Ulsan College of Medicine, Seoul (Korea, Republic of)

    2016-08-15

    The aim of this study was to evaluate whether malignant-looking thyroid nodules with size reduction were malignant or not. From November 2010 to July 2011, we retrospectively enrolled 16 patients with 16 nodules (11 females and five males; mean age, 55 years) who underwent core needle biopsy (CNB), and whose thyroid nodules had malignant ultrasonographic (US) features, although they showed size reduction (>20% decrease in maximum diameter) during the follow-up period (mean, 37±27 months). The histologic findings of the CNB specimen were reviewed and correlated with the US findings. US studies were analyzed for their internal content, shape, margin, echogenicity, the presence of microcalcification and macrocalcification, inner isoechoic rim, and low-echoic halo. All nodules were confirmed as benign by CNB. Pathologic analysis was available for 12 CNB specimens. US imaging showed central hypoechogenicity or marked hypoechogenicity in all cases and a peripheral isoechoic rim in 15 nodules. US-pathologic correlation showed that the central hypoechoic area was primarily composed of fibrosis (12/12) and hemorrhage (8/12) and that the isoechoic rim was composed of follicular cells. In our study, the CNB results of all of the malignant-looking thyroid nodules with size reduction were benign and were primarily composed of internal fibrosis and hemorrhage. Understanding these US and pathologic features could prevent repeated fine-needle aspiration or unnecessary diagnostic surgery.

  9. Sustainable food production in marginal lands—Case of GDLA member countries

    Directory of Open Access Journals (Sweden)

    Shabbir A. Shahid

    2013-06-01

    Full Text Available Sustainable food production in the changing climate and dwindling water resources in the Global Dry Land Alliance (GDLA member countries is a real challenge, especially when considering marginal lands in dryland systems. The definition of marginal land is very vague and defined from different perspectives (pragmatism about marginal lands. Dryland itself indicates "marginality" due to water stress. In general, the abandoned agriculture land where food production is not economical, and has low inherent productivity potential is considered marginal; however, a land may be marginal for agriculture but vital for grazing. In this paper attempts have been made to give review of literature (water stress, extent of marginal saline lands, marginality. Policy matters (development of soil, water and agriculture strategies that GDLA and member countries should consider for future sustainable food production in their countries, including but not limited to, assessment of land resources for agriculture potential, defining, mapping and characterizing marginal lands, and use of innovative technologies (conservation agriculture, climate smart agriculture, integrated soil reclamation program and capacity building for food production, are discussed. The international perception (FAO, UNEP, CGIAR on marginal lands is also described. An innovative approach of using national biocapacity and ecological footprint is used to assess marginality of GDLA member countries. Ecological overshoot (using 1.5 earth planets and biocapacity debtor and creditor countries are highlighted. Challenges and best management practices for food production in marginal lands are included. Other important issues, like leasing land abroad, GDLA strategic food reserves and best management practices, innovative ideas for food production are shared. Finally recommendations are drafted for actions by GDLA, its member countries and the partners.

  10. Effect of Blood Contamination on Marginal Adaptation and Surface Microstructure of Mineral Trioxide Aggregate: A SEM Study

    Directory of Open Access Journals (Sweden)

    Amin Salem Milani

    2013-08-01

    Full Text Available Background and aims. In various clinical situations, mineral trioxide aggregate (MTA may come into direct contact or even be mixed with blood. The aim of the present study was to evaluate the effect of exposure to blood on marginal adaptation and surface microstructure of MTA. Materials and methods. Thirty extracted human single-rooted teeth were used. Standard root canal treatment was carried out. Root-ends were resected, and retrocavities were prepared. The teeth were randomly divided into two groups (n = 15: in group 1, the internal surface of the cavities was coated with fresh blood. Then, the cavities were filled with MTA. The roots were immersed in molds containing fresh blood. In group 2, the aforementioned procedures were performed except that synthetic tissue fluid (STF was used instead of blood. To assess the marginal adaptation, “gap perimeter” and “maximum gap width” were measured under scanning electron microscope. The surface microstructure was also examined. Independent samples t-test and Mann-Whitney U test were used to analyze the data. Results. Maximum gap width and gap perimeter in the blood-exposed group were significantly larger than those in the STF-exposed group (p < 0.01. In the blood-exposed group, the crystals tended to be more rounded and less angular compared with the STF-exposed group, and there was a general lack of needle-like crystals. Conclusion. Exposure to blood during setting has a negative effect on marginal adaptation of MTA, and blood-exposed MTA has a different surface microstructure compared to STF-exposed MTA.

  11. Effect of different resin luting cements on the marginal fit of lithium disilicate pressed crowns.

    Science.gov (United States)

    Mounajjed, Radek; Salinas, Thomas J; Ingr, Tomas; Azar, Basel

    2017-11-15

    The vertical marginal discrepancy of restorations can increase upon cementation, and poor marginal fit can lead to cement dissolution, marginal discoloration, microleakage, and secondary caries. The amount of increase is related to the type of luting cement used, but how lithium disilicate pressed crowns are affected by different resin cements is unclear. The purpose of this in vitro study was to compare the effect of using different resin luting cements on the vertical marginal discrepancy of lithium disilicate pressed crowns. A total of 18 intact extracted mandibular third molars were disinfected in a solution of 10% formalin for 7 days and were then prepared to receive a ceramic crown. Impressions were made with polyvinyl siloxane and lithium disilicate pressed crowns made and cemented with 1 of 3 resin luting cements. The marginal discrepancy was measured at 4 points on the finishing line of each tooth, with optical microscopy at ×200 magnification before and after cementation. Statistical analysis was done with the Kruskal-Wallis test to compare the median marginal increase among the 3 groups. The least amount of marginal increase after cementation was with Harvard PremiumFlow cement, with an average marginal increase of 42 ±11 μm. RelyX Ultimate cement increased the margins by an average 45 ±29 μm. The highest marginal increase was found in the Enamel Plus HRi preheated composite resin group (116 ±47 μm). The marginal increase of pressed crowns cemented with preheated composite resin (Enamel Plus HRi) exceeded the clinically acceptable range of marginal discrepancy. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  12. Identifying technology innovations for marginalized smallholders-A conceptual approach.

    Science.gov (United States)

    Malek, Mohammad Abdul; Gatzweiler, Franz W; Von Braun, Joachim

    2017-05-01

    This paper adds a contribution in the existing literature in terms of theoretical and conceptual background for the identification of idle potentials of marginal rural areas and people by means of technological and institutional innovations. The approach follows ex-ante assessment for identifying suitable technology and institutional innovations for marginalized smallholders in marginal areas-divided into three main parts (mapping, surveying and evaluating) and several steps. Finally, it contributes to the inclusion of marginalized smallholders by an improved way of understanding the interactions between technology needs, farming systems, ecological resources and poverty characteristics in the different segments of the poor, and to link these insights with productivity enhancing technologies.

  13. Marginal microleakage of class V composite restorations before and after AFP gel application

    Directory of Open Access Journals (Sweden)

    Davari Abdolrahim

    2015-01-01

    Full Text Available   Background and Aims: The most effective preventing tooth decay method is fluoride compounds applications. Some studies suggested that APF gels caused changes on the superficial physical properties of composite. Therefore, the purpose of this study was to evaluate the marginal microleakage of class V composite restorations before and after AFP gel application.   Materials and Methods: The class V cavities in buccal surfaces of 45 molar teeth were made in such a way that occlusal margin was placed in enamel and cervical margin in cement. In group 1, at first fluoride-therapy and then cavity preparation and restoration by composite resin was done. In group 2, at first the class V cavities were prepared and restored, then fluoride-therapy was carried out. In group 3, cavities were prepared and restored with no fluoride-therapy. The dye penetration rate in occlusal and cervical margins was examined by stereomicroscope. Data were statistically analyzed using Kruskal-Wallis and Mann-Whitney test.   Results: There was no statistically significant difference between groups ( P=0.975.   Conclusion: Fluoride-therapy using AFP gel before and after class V composite restorations, had no significant effect on the microleakage of dentin and enamel margins.

  14. Marginal accuracy of nickel chromium copings fabricated by conventional and accelerated casting procedures, produced with ringless and metal ring investment procedures: A comparative in vitro study

    Directory of Open Access Journals (Sweden)

    Deepa Alex

    2015-01-01

    Conclusion: The Ni-Cr cast copings fabricated with the conventional casting using ringless investment system showed significantly better marginal fit than that of cast copings fabricated from conventional and accelerated casting with metal ring investment and accelerated casting using ringless investment since those copings had shown the least vertical marginal discrepancies among the four methods evaluated in this study.

  15. Evaluation of target coverage and margins adequacy during CyberKnife Lung Optimized Treatment.

    Science.gov (United States)

    Ricotti, Rosalinda; Seregni, Matteo; Ciardo, Delia; Vigorito, Sabrina; Rondi, Elena; Piperno, Gaia; Ferrari, Annamaria; Zerella, Maria Alessia; Arculeo, Simona; Francia, Claudia Maria; Sibio, Daniela; Cattani, Federica; De Marinis, Filippo; Spaggiari, Lorenzo; Orecchia, Roberto; Riboldi, Marco; Baroni, Guido; Jereczek-Fossa, Barbara Alicja

    2018-04-01

    -moving PTV. Similar to dose-volume histogram, CTV coverage-volume histograms (defined as CVH) were derived for each patient and treatment modality. The geometric coverages of the 90% and 95% of CTV volume (C90, C95, respectively) were evaluated. Patient-specific optimal margins (ensuring C95 ≥ 95%) were computed retrospectively. The median ± interquartile-rage of C90 and C95 for upper lobe lesions was 99.1 ± 0.6% and 99.0 ± 3.1%, whereas they were 98.9 ± 4.2% and 97.8 ± 7.5% for lower and middle lobe tumors. In 2-view, 1-view and 0-view modality, adopted margins ensured C95 ≥ 95% in 70%, 85% and 63% of cases and C95 ≥ 90% in 90%, 88% and 83% of cases, respectively. In 2-view, 1-view and 0-view a reduction in margins still ensured C95 ≥ 95% in 33%, 78% and 59% of cases, respectively. CTV coverage analysis provided an a-posteriori evaluation of the treatment geometric accuracy and allowed a quantitative verification of the adequacy of the PTV margins applied in CyberKnife LOT treatments offering guidance in the selection of CTV margins. © 2018 American Association of Physicists in Medicine.

  16. "Resuscitation" of marginal liver allografts for transplantation with machine perfusion technology.

    Science.gov (United States)

    Graham, Jay A; Guarrera, James V

    2014-08-01

    As the rate of medically suitable donors remains relatively static worldwide, clinicians have looked to novel methods to meet the ever-growing demand of the liver transplant waiting lists worldwide. Accordingly, the transplant community has explored many strategies to offset this deficit. Advances in technology that target the ex vivo "preservation" period may help increase the donor pool by augmenting the utilization and improving the outcomes of marginal livers. Novel ex vivo techniques such as hypothermic, normothermic, and subnormothermic machine perfusion may be useful to "resuscitate" marginal organs by reducing ischemia/reperfusion injury. Moreover, other preservation techniques such as oxygen persufflation are explored as they may also have a role in improving function of "marginal" liver allografts. Currently, marginal livers are frequently discarded or can relegate the patient to early allograft dysfunction and primary non-function. Bench to bedside advances are rapidly emerging and hold promise for expanding liver transplantation access and improving outcomes. Copyright © 2014 European Association for the Study of the Liver. Published by Elsevier B.V. All rights reserved.

  17. Late Cenozoic flexural deformation of the middle U.S. Atlantic passive margin

    Science.gov (United States)

    Pazzaglia, Frank J.; Gardner, Thomas, W.

    1994-01-01

    Despite the century-long recognition of regional epeirogeny along the middle Atlantic passive margin, relatively few studies have focused on understanding postrift uplift mechanisms. Here, we demonstrate that epeirogenic uplift of the central Appalachian Piedmont and subsidence of the Salisbury Embayment represent first-order, flexural isostatic processes driven by continental denudation and offshore deposition. Our results show that regional epeirogenic processes, present on all Atlantic-type passive margins, are best resolved by specific stratigraphic and geomorphic relationships, rather than topography. A simple one-dimensional geodynamic model, constrained by well-dated Baltimore Canyon trough, Coastal Plain, and lower Susquehanna River (piedmont) stratigraphy, simulates flexural deforamtion of the U.S. Atlantic margin. The model represents the passive margin lithosphree as a uniformly thick elastic plate, without horizontal compressive stresses, that deforms flexurally under the stress of strike-averaged, vertically applied line loads. Model results illustrate a complex interaction among margin stratigraphy and geomorphology, the isostatic repsonse to denudational and depositional processes, and the modulating influence of exogenic forces such as eustasy. The current elevation, with respect to modern sea level, of fluvial terraces and correlateive Coastal Plain deposits or unconformities is successfully predicted through the synthesis of paleotopography, eustatic change, and margin flexure. Results suggest that the middle U.S. Atlantic margin landward of East Coast Magnetic Anomaly is underlain by lithoshpere with an average elastic thickness of 40 km (flexural rigidity, D = 4 X 10(exp 23) N m), the margin experience an average, long-term denudation rate of approximately 10m/m.y., and the Piedmont has been flexurally upwaped between 35 and 130 meters in the last 15 m.y. Long term isostatic continental uplift resulting rom denudation and basin subsidence

  18. Potato production in Europe - a gross margin analysis

    DEFF Research Database (Denmark)

    Pedersen, Søren Marcus; Bizik, Jan; Costa, Luisa Dalla

    The purpose of this paper is to examine different cropping practices, cost structures and gross margins for producing conventional table potatoes in 6 different regions within the European Union: Czech Republic, Denmark, Italy, Poland, Portugal and Slovakia. Findings from this study show that pot...

  19. Electric energy deficit marginal cost: historic, evaluation and proposition of a new method; Custo marginal do deficit de energia eletrica: historico, avaliacao e proposta de uma nova metodologia

    Energy Technology Data Exchange (ETDEWEB)

    Loureiro, Paulo Gerson Cayres

    2009-05-15

    The optimization model actually used to the energy operation planning of the National Interconnected System - NIS has as objective function the minimization of expected total cost operation. To achieve this goal the model provides optimal allocation of hydrothermal resources during the study horizon, employing aggregated subsystems. The deficit marginal cost is a parameter which is explicitly informed to the model, and does a part in the operation total cost calculation being a predominant factor in the service conditions evaluation of national electric energy market, affecting the energy costs and the risk of deficit on NIS. In this work is realized an integral study about the electric energy deficit marginal cost, starting with a historical review, followed by a actualization of your actual value and a propose of a new method for the calculation of deficit marginal cost value. The studies shows the impact of the values found over service conditions to the electric energy market in the energy operation planning, focusing on some usual indicators adopted in studies of the electrical sector. (author)

  20. Complex force network in marginally and deeply jammed solids

    International Nuclear Information System (INIS)

    Hu Mao-Bin; Jiang Rui; Wu Qing-Song

    2013-01-01

    This paper studies the force network properties of marginally and deeply jammed packings of frictionless soft particles from the perspective of complex network theory. We generate zero-temperature granular packings at different pressures by minimizing the inter-particle potential energy. The force networks are constructed as nodes representing particles and links representing normal forces between the particles. Deeply jammed solids show remarkably different behavior from marginally jammed solids in their degree distribution, strength distribution, degree correlation, and clustering coefficient. Bimodal and multi-modal distributions emerge when the system enters the deep jamming region. The results also show that small and large particles can show different correlation behavior in this simple system

  1. Three independent one-dimensional margins for single-fraction frameless stereotactic radiosurgery brain cases using CBCT

    International Nuclear Information System (INIS)

    Zhang, Qinghui; Chan, Maria F.; Burman, Chandra; Song, Yulin; Zhang, Mutian

    2013-01-01

    Purpose: Setting a proper margin is crucial for not only delivering the required radiation dose to a target volume, but also reducing the unnecessary radiation to the adjacent organs at risk. This study investigated the independent one-dimensional symmetric and asymmetric margins between the clinical target volume (CTV) and the planning target volume (PTV) for linac-based single-fraction frameless stereotactic radiosurgery (SRS).Methods: The authors assumed a Dirac delta function for the systematic error of a specific machine and a Gaussian function for the residual setup errors. Margin formulas were then derived in details to arrive at a suitable CTV-to-PTV margin for single-fraction frameless SRS. Such a margin ensured that the CTV would receive the prescribed dose in 95% of the patients. To validate our margin formalism, the authors retrospectively analyzed nine patients who were previously treated with noncoplanar conformal beams. Cone-beam computed tomography (CBCT) was used in the patient setup. The isocenter shifts between the CBCT and linac were measured for a Varian Trilogy linear accelerator for three months. For each plan, the authors shifted the isocenter of the plan in each direction by ±3 mm simultaneously to simulate the worst setup scenario. Subsequently, the asymptotic behavior of the CTV V 80% for each patient was studied as the setup error approached the CTV-PTV margin.Results: The authors found that the proper margin for single-fraction frameless SRS cases with brain cancer was about 3 mm for the machine investigated in this study. The isocenter shifts between the CBCT and the linac remained almost constant over a period of three months for this specific machine. This confirmed our assumption that the machine systematic error distribution could be approximated as a delta function. This definition is especially relevant to a single-fraction treatment. The prescribed dose coverage for all the patients investigated was 96.1%± 5.5% with an extreme

  2. Reconstructing marginality: a new model of cultural diversity in nursing.

    Science.gov (United States)

    Southwick, Margaret; Polaschek, Nick

    2014-05-01

    This article presents a new model of cultural diversity in nursing that critically reconstructs the concept of marginality that underpins other models. Rather than viewing the marginal as "other," marginality is redefined as the space in between the dominant cultural reality and the cultural realities of minority groups located within a society. Members of a minority cultural group who become skilled in the difficult process of negotiating this in-between space open the possibility of transformation within nursing education and practice. This model has been applied in a study of the experience of nursing students of Pacific ethnicity in New Zealand. Subsequently, an undergraduate Pacific nursing program was developed, with greatly increased success rates in registration of Pacific nurses. This model of cultural diversity can also be used to understand nursing practice involving people from minority cultures or other socially excluded categories. Copyright 2014, SLACK Incorporated.

  3. Technical specification improvement through safety margin considerations

    International Nuclear Information System (INIS)

    Howard, R.C.; Jansen, R.L.

    1986-01-01

    Westinghouse has developed an approach for utilizing safety analysis margin considerations to improve plant operability through technical specification revision. This approach relies on the identification and use of parameter interrelations and sensitivities to identify acceptable operating envelopes. This paper summarizes technical specification activities to date and presents the use of safety margin considerations as another viable method to obtain technical specification improvement

  4. Pattern of Failure After Limited Margin Radiotherapy and Temozolomide for Glioblastoma

    International Nuclear Information System (INIS)

    McDonald, Mark W.; Shu, Hui-Kuo G.; Curran, Walter J.; Crocker, Ian R.

    2011-01-01

    Purpose: To evaluate the pattern of failure after limited margin radiotherapy for glioblastoma. Methods and Materials: We analyzed 62 consecutive patients with newly diagnosed glioblastoma treated between 2006 and 2008 with standard fractionation to a total dose of 60Gy with concurrent temozolomide (97%) or arsenic trioxide (3%). The initial clinical target volume included postoperative T2 abnormality with a median margin of 0.7cm. The boost clinical target volume included residual T1-enhancing tumor and resection cavity with a median margin of 0.5cm. Planning target volumes added a 0.3- or 0.5-cm margin to clinical target volumes. The total boost planning target volume (PTV boost ) margin was 1cm or less in 92% of patients. The volume of recurrent tumor (new T1 enhancement) was categorized by the percent within the 60-Gy isodose line as central (>95%), infield (81-95%), marginal (20-80%), or distant ( boost with a 2.5-cm margin were created for each patient. Results: With a median follow-up of 12 months, radiographic tumor progression developed in 43 of 62 patients. Imaging was available for analysis in 41: 38 (93%) had central or infield failure, 2 (5%) had marginal failure, and 1 (2%) had distant failure relative to the 60-Gy isodose line. The treated PTV boost (median, 140cm 3 ) was, on average, 70% less than the PTV boost with a 2.5-cm margin (median, 477cm 3 ) (p boost margin of 1cm or less did not appear to increase the risk of marginal and/or distant tumor failures compared with other published series. With careful radiation planning and delivery, it appears that treatment margins for glioblastoma can be reduced.

  5. Optimal reduction of humus in demineralization

    International Nuclear Information System (INIS)

    Persson, F.

    1989-04-01

    To have an optimal reduction of organic substance and colloids in a demineralization plant the following ought to be observed. * At least two anion exchangers should be in series. The firs one being either a weak macroporous polystyrene anion exchanger or a weak polyacrylic anion exchanger. A third anion exchanger in series improves the reduction only marginally. * The leakage of organic substance and colloids increases rapidly at the same time or before the leakage of anions. The anion exchangers in a plant should therefore have a higher capacity than the cation exchangers. If the anion exchangers do not have a higher capacity than the cation exchangers only 90-95 % of the capacity shall be used. * The filtration rates have normally no influence of the reduction organic of substance. Sometime a low filtration rate gives a better reduction of colloids. * The content of organic substance in the water to the plants has a great effect on the capacity for ions. At high content of organic substance (20 mg KMnO 4 ) the capacity for ions can be reduced with 30-40 %. * Different technics for regenerations does not seem to have any influence on the reduction of organic substances and colloids. Neither age of the anion exchangers nor washing with solutions of sodium chloride seems to have any influence on the reduction. Age and organic contamination have mainly an influence on the capacity per regeneration. At all demineralization plants some organic substances and colloids leak through the plant, the quantities depending on the colloids. To remove this organic substances and colloids the ion exchangers must be completed with for instance flocculation or reverse osmosis. (L.E.)

  6. Stroke: a Hidden Danger of Margin Trading in Stock Markets.

    Science.gov (United States)

    Lin, Shu-Hui; Wang, Chien-Ho; Liu, Tsai-Ching; Chen, Chin-Shyan

    2015-10-01

    Using 10-year population data from 2000 through 2009 in Taiwan, this is the first paper to analyze the relationship between margin trading in stock markets and stroke hospitalizations. The results show that 3 and 6 days after an increase of margin trading in the Taiwan stock markets are associated with greater stoke hospitalizations. In general, a 1 % increase in total margin trading positions is associated with an increment of 2.5 in the total number of stroke hospitalizations, where the mean number of hospital admissions is 233 cases a day. We further examine the effects of margin trading by gender and age groups and find that the effects of margin trading are significant for males and those who are 45-74 years old only. In summary, buying stocks with money you do not have is quite risky, especially if the prices of those stocks fall past a certain level or if there is a sudden and severe drop in the stock market. There is also a hidden danger to one's health from margin trading. A person should be cautious before conducting margin trading, because while it can be quite profitable, danger always lurks just around the corner.

  7. Lead poisoning and marginalization in newborns of Morelos, Mexico

    Directory of Open Access Journals (Sweden)

    Martha María Téllez-Rojo

    2017-05-01

    Full Text Available Objective. To determine the prevalence of lead (Pb poi- soning at birth in Morelos, analyze its distribution by social marginalization level, and estimate the association with the use of lead glazed ceramics (LGC. Materials and methods. Blood lead level (BLL in umbilical cord was measured in a representative sample of 300 randomly selected births at the Morelos Health Services and state IMSS. Results. The prevalence of Pb poisoning at birth (BLL> 5µg/dL was 14.7%(95%CI: 11.1, 19.3 and 22.2% (95%CI: 14.4, 32.5 in the most socially marginalized municipalities. 57.1% (95%CI: 51.3, 62.7of the mothers used LGC during pregnancy, and the frequency of use was significantly associated with BLL. Conclusion. This is the first study to document the proportion of new- borns with Pb poisoning who are at risk of experiencing the related adverse effects. It is recommended to monitor BLL at birth and take action to reduce this exposure, especially in socially marginalized populations.

  8. Nitrogen management of switchgrass and miscanthus on marginal soils

    Science.gov (United States)

    Miscanthus × giganteus and switchgrass yield and fertilizer N requirements have been well studied in Europe and parts of the United States, but few reports have investigated their production on eroded claypan soils economically marginal for grain crops. This study was conducted to evaluate yield pot...

  9. Uplift history of a transform continental margin revealed by the stratigraphic record: The case of the Agulhas transform margin along the Southern African Plateau

    Science.gov (United States)

    Baby, Guillaume; Guillocheau, François; Boulogne, Carl; Robin, Cécile; Dall'Asta, Massimo

    2018-04-01

    The south and southeast coast of southern Africa (from 28°S to 33°S) forms a high-elevated transform passive margin bounded to the east by the Agulhas-Falkland Fracture Zone (AFFZ). We analysed the stratigraphic record of the Outeniqua and Durban (Thekwini) Basins, located on the African side of the AFFZ, to determine the evolution of these margins from the rifting stage to present-day. The goal was to reconstruct the strike-slip evolution of the Agulhas Margin and the uplift of the inland high-elevation South African Plateau. The Agulhas transform passive margin results from four successive stages: Rifting stage, from Late Triassic to Early Cretaceous ( 200?-134 Ma), punctuated by three successive rifting episodes related to the Gondwana breakup; Wrench stage (134-131 Ma), evidenced by strike- and dip-slip deformations increasing toward the AFFZ; Active transform margin stage (131-92 Ma), during which the Falkland/Malvinas Plateau drifts away along the AFFZ, with an uplift of the northeastern part of the Outeniqua Basin progressively migrating toward the west; Thermal subsidence stage (92-0 Ma), marked by a major change in the configuration of the margin (onset of the shelf-break passive margin morphology). Two main periods of uplift were documented during the thermal subsidence stage of the Agulhas Margin: (1) a 92 Ma short-lived margin-scale uplift, followed by a second one at 76 Ma located along the Outeniqua Basin and; (2) a long-lasting uplift from 40 to 15 Ma limited to the Durban (Thekwini) Basin. This suggests that the South African Plateau is an old Upper Cretaceous relief (90-70 Ma) reactivated during Late Eocene to Early Miocene times (40-15 Ma).

  10. Improving safety margin of LWRs by rethinking the emergency core cooling system criteria and safety system capacity

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Youho, E-mail: euo@kaist.ac.kr; Kim, Bokyung, E-mail: bkkim2@kaist.ac.kr; NO, Hee Cheon, E-mail: hcno@kaist.ac.kr

    2016-10-15

    Highlights: • Zircaloy embrittlement criteria can increase to 1370 °C for CP-ECR lower than 13%. • The draft ECCS criteria of U.S. NRC allow less than 5% in power margin. • The Japanese fracture-based criteria allow around 5% in power margin. • Increasing SIT inventory is effective in assuring safety margin for power uprates. - Abstract: This study investigates the engineering compatibility between emergency core cooling system criteria and safety water injection systems, in the pursuit of safety margin increase of light water reactors. This study proposes an acceptable temperature increase to 1370 °C as long as equivalent cladding reacted calculated by the Cathcart–Pawel equation is below 13%, after an extensive literature review. The influence of different ECCS criteria on the safety margin during large break loss of coolant accident is investigated for OPR-1000 by the system code MARS-KS, implemented with the KINS-REM method. The fracture-based emergency core cooling system (ECCS) criteria proposed in this study are shown to enable power margins up to 10%. In the meantime, the draft U.S. NRC’s embrittlement criteria (burnup-sensitive) and Japanese fracture-based criteria are shown to allow less than 5%, and around 5% of power margins, respectively. Increasing safety injection tank (SIT) water inventory is the key, yet convenient, way of assuring safety margin for power increase. More than 20% increase in the SIT water inventory is required to allow 15% power margins, for the U.S. NRC’s burnup-dependent embrittlement criteria. Controlling SIT water inventory would be a useful option that could allow the industrial desire to pursue power margins even under the recent atmosphere of imposing stricter ECCS criteria for the considerable burnup effects.

  11. Evaluation of marginal gap of Ni-Cr copings made with conventional and accelerated casting techniques.

    Science.gov (United States)

    Tannamala, Pavan Kumar; Azhagarasan, Nagarasampatti Sivaprakasam; Shankar, K Chitra

    2013-01-01

    Conventional casting techniques following the manufacturers' recommendations are time consuming. Accelerated casting techniques have been reported, but their accuracy with base metal alloys has not been adequately studied. We measured the vertical marginal gap of nickel-chromium copings made by conventional and accelerated casting techniques and determined the clinical acceptability of the cast copings in this study. Experimental design, in vitro study, lab settings. Ten copings each were cast by conventional and accelerated casting techniques. All copings were identical, only their mold preparation schedules differed. Microscopic measurements were recorded at ×80 magnification on the perpendicular to the axial wall at four predetermined sites. The marginal gap values were evaluated by paired t test. The mean marginal gap by conventional technique (34.02 μm) is approximately 10 μm lesser than that of accelerated casting technique (44.62 μm). As the P value is less than 0.0001, there is highly significant difference between the two techniques with regard to vertical marginal gap. The accelerated casting technique is time saving and the marginal gap measured was within the clinically acceptable limits and could be an alternative to time-consuming conventional techniques.

  12. RECONSTRUCTING PALEO-SMT POSITIONS ON THE CASCADIA MARGIN USING MAGNETIC SUSCEPTIBILITY

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Joel [Univ. of New Hampshire, Durham, NH (United States); Phillips, Stephen [Univ. of New Hampshire, Durham, NH (United States)

    2014-09-30

    Magnetic susceptibility (κ) is a mixed signal in marine sediments, representing primary depositional and secondary diagenetic processes. Production of hydrogen sulfide via anaerobic oxidation of methane (AOM) at the sulfate-methane transition (SMT) and organoclastic sulfate reduction above the SMT can result in the dissolution of iron oxides, altering κ in sediments in methane gas and gas hydrate bearing regions. We investigated records of κ on the Cascadia margin (ODP Sites 1249 and 1252; IODP Site 1325) using a Zr/Rb heavy mineral proxy from XRF core scanning to identify intervals of primary detrital magnetic susceptibility and intervals and predict intervals affected by magnetite dissolutions. We also measured total sulfur content, grain size distributions, total organic carbon (TOC) content, and magnetic mineral assemblage. The upper 100 m of Site 1252 contains a short interval of κ driven by primary magnetite, with multiple intervals (> 90 m total) of decreased κ correlated with elevated sulfur content, consistent with dissolution of magnetite and re-precipitation of pyrite. In the upper 90 m of Site 1249, κ is almost entirely altered by diagenetic processes, with much of the low κ explained by a high degree of pyritization, and some intervals affected by the precipitation of magnetic iron sulfides. At Site 1325, κ between 0-20 and 51-73 mbsf represents primary mineralogy, and in the interval 24-51 mbsf, κ may be reduced due to pyritization. This integrated approach allows for a prediction of primary κ and the amount of κ loss at each site when compared to actual κ measurements. In the case of magnetite dissolution and full pyritization, these drawdowns in κ are supported by sulfur measurements, and the exposure times of magnetite to hydrogen sulfide can be modeled. The presence of methane and methane hydrates at these sites, as well as large variations in TOC content, suggest that the past migration rates of the SMT and variation in sulfate

  13. Firn thickness variations across the Northeast Greenland Ice Stream margins indicating nonlinear densification rates

    Science.gov (United States)

    Riverman, K. L.; Anandakrishnan, S.; Alley, R. B.; Peters, L. E.; Christianson, K. A.; Muto, A.

    2013-12-01

    Northeast Greenland Ice Stream (NEGIS) is the largest ice stream in Greenland, draining approximately 8.4% of the ice sheet's area. The flow pattern and stability mechanism of this ice stream are unique to others in Greenland and Antarctica, and merit further study to ascertain the sensitivity of this ice stream to future climate change. Geophysical methods are valuable tools for this application, but their results are sensitive to the structure of the firn and any spatial variations in firn properties across a given study region. Here we present firn data from a 40-km-long seismic profile across the upper reaches of NEGIS, collected in the summer of 2012 as part of an integrated ground-based geophysical survey. We find considerable variations in firn thickness that are coincident with the ice stream shear margins, where a thinner firn layer is present within the margins, and a thicker, more uniform firn layer is present elsewhere in our study region. Higher accumulation rates in the marginal surface troughs due to drift-snow trapping can account for some of this increased densification; however, our seismic results also highlight enhanced anisotropy within the firn and upper ice column that is confined to narrow bands within the shear margins. We thus interpret these large firn thickness variations and abrupt changes in anisotropy as indicators of firn densification dependent on the effective stress state as well as the overburden pressure, suggesting that the strain rate increases nonlinearly with stress across the shear margins. A GPS strain grid maintained for three weeks across both margins observed strong side shearing, with rapid stretching and then compression along particle paths, indicating large deviatoric stresses in the margins. This work demonstrates the importance of developing a high-resolution firn densification model when conducting geophysical field work in regions possessing a complex ice flow history; it also motivates the need for a more

  14. Negative predictive value of ultrasound in predicting tumor-free margins in specimen sonography

    International Nuclear Information System (INIS)

    Naz, S.; Hafeez, S.; Hussain, Z.; Hilal, K.

    2017-01-01

    Objective: To evaluate the success of ultrasound in post-excision specimen visualization, and negative predictive value of ultrasound for estimation of tumor-free margins using histopathology as the gold standard. Study Design: Cross-sectional analytical study. Place and Duration of Study: The Aga Khan University Hospital, Karachi, Pakistan, from May 2010 till January 2013. Methodology: Sonography of all breast nodules was done before and after exicision by two female radiologists with at least five years clinical experience. All surgeries were performed by the same referring breast surgeons. All nodules were non-palpable and had histopathology as well as specimen sonography performed at AKUH. Subjects were excluded, if histopathology was not available, post-procedure sonogram not done or done in another hospital and nodules that were not seen on ultrasound. After needle localization in 47 patients using ultrasound and in 7 patients using mammogram was done, sonogram was conducted in all 54 lesions. These were then assessed by ultrasound for detection of lesion and tumor-free margins in malignant lesion. Post-excision ultrasound was performed for the evaluation of lesion whether visualized or absent with localizing needle in situ, lesion dimensions, depth measurement between the superior margin of the lesion and its edge. Results: All 54 lesions were present on post-exicison scan, out of which 28 were documented as malignant and 26 as benign. Ultrasound declared all specimens as tumor-free. On histopathology, two lesions were documented as having tumor-positive margins and were proven to be invasive lobular carcinoma. Therefore, the negative predictive value of the specimen sonography for margin detection was 26/28 (92.8%). Conclusion: Ultrasound of the excised breast tumor specimen is a simple and reliable technique for confirmation of the tumor-free margins in non-palpable breast lesions. (author)

  15. Prevalence of human papilloma virus in marginal periodontium and its association with periodontitis: A cross sectional study

    Directory of Open Access Journals (Sweden)

    Anila Jacob

    2014-01-01

    Full Text Available Context: Bacterial pathogens in dental plaque are necessary for the development of periodontitis but this etiology alone does not explain all its clinicopathologic features. Researchers have proven the role of certain viruses like herpes virus in periodontal disease which implies that other viral agents like human papilloma virus may also be involved. Aims: This cross-sectional study was conducted to determine the proportion of patients with human papilloma virus (HPV-16 in marginal periodontium by analyzing DNA from the gingival tissue sample and to understand its association with periodontitis. Settings and Design: 102 systemically healthy patients between the age group of 15 and 70 years reporting to the Department of Periodontology who required surgical intervention (flap surgery for patients with periodontitis and crown lengthening for healthy patients with internal bevel gingivectomy were selected. Materials and Methods: After scaling and root planning, gingival tissue was collected during the respective surgical procedure. DNA was isolated and amplified using specific primers for HPV-16 by polymerase chain reaction (PCR. The amplified products were checked by agarose gel electrophoresis. Results: No HPV DNA was detected in the 102 samples analyzed. Conclusion: Marginal periodontium does not contain HPV in this study population and hence there was no association between HPV and periodontitis.

  16. Experimental measurements and numerical modeling of marginal burning in live chaparral fuel beds

    Science.gov (United States)

    X. Zhou; D.R. Weise; S Mahalingam

    2005-01-01

    An extensive experimental and numerical study was completed to analyze the marginal burning behavior of live chaparral shrub fuels that grow in the mountains of southern California. Laboratory fire spread experiments were carried out to determine the effects of wind, slope, moisture content, and fuel characteristics on marginal burning in fuel beds of common...

  17. The determinants of intermediaries’ power over farmers’ margin-related activities

    DEFF Research Database (Denmark)

    Xhoxhi, Orjon; Pedersen, Søren Marcus; Lind, Kim Martin Hjorth

    2014-01-01

    This paper investigates the determinants of intermediaries’ power over farmers’ margin-related activities in Adana, Turkey. In doing so, a holistic model of intermediaries’ power over farmers’ margin-related activities is proposed. The objective of this model is to contribute to a better understa......This paper investigates the determinants of intermediaries’ power over farmers’ margin-related activities in Adana, Turkey. In doing so, a holistic model of intermediaries’ power over farmers’ margin-related activities is proposed. The objective of this model is to contribute to a better...

  18. Volcanic passive margins: another way to break up continents.

    Science.gov (United States)

    Geoffroy, L; Burov, E B; Werner, P

    2015-10-07

    Two major types of passive margins are recognized, i.e. volcanic and non-volcanic, without proposing distinctive mechanisms for their formation. Volcanic passive margins are associated with the extrusion and intrusion of large volumes of magma, predominantly mafic, and represent distinctive features of Larges Igneous Provinces, in which regional fissural volcanism predates localized syn-magmatic break-up of the lithosphere. In contrast with non-volcanic margins, continentward-dipping detachment faults accommodate crustal necking at both conjugate volcanic margins. These faults root on a two-layer deformed ductile crust that appears to be partly of igneous nature. This lower crust is exhumed up to the bottom of the syn-extension extrusives at the outer parts of the margin. Our numerical modelling suggests that strengthening of deep continental crust during early magmatic stages provokes a divergent flow of the ductile lithosphere away from a central continental block, which becomes thinner with time due to the flow-induced mechanical erosion acting at its base. Crustal-scale faults dipping continentward are rooted over this flowing material, thus isolating micro-continents within the future oceanic domain. Pure-shear type deformation affects the bulk lithosphere at VPMs until continental breakup, and the geometry of the margin is closely related to the dynamics of an active and melting mantle.

  19. Consideration of margins for hypo fractionated radiotherapy

    International Nuclear Information System (INIS)

    Herschtal, A.; Foroudi, F.; Kron, T.

    2010-01-01

    Full text: Geographical misses of the tumour are of concern in radiotherapy and are typically accommodated by introducing margins around the target. However, there is a trade-off between ensuring the target receives sufficient dose and minimising the dose to surrounding normal structures. Several methods of determining margin width have been developed with the most commonly used one proposed by M. VanHerk (VanHerk UROBP 52: 1407, 2002). VanHerk's model sets margins to achieve 95% of dose coverage for the target in 90% of patients. However, this model was derived assuming an infinite number of fractions. The aim of the present work is to estimate the modifications necessary to the model if a finite number of fractions are given. Software simulations were used to determine the true probability of a patient achieving 95% target coverage if different fraction numbers are used for a given margin width. Model parameters were informed by a large data set recently acquired at our institution using daily image guidance for prostate cancer patients with implanted fiducial markers. Assuming a 3 mm penumbral width it was found that using the VanHerk model only 74 or 54% of patients receive 95% of the prescription dose if 20 or 6 fractions are given, respectively. The steep dose gradients afforded by IMRT are likely to make consideration of the effects of hypofractionation more important. It is necessary to increase the margins around the target to ensure adequate tumour coverage if hypofractionated radiotherapy is to be used for cancer treatment. (author)

  20. A Summary of Results From the IPOD Transects Across the Japan, Mariana, and Middle-America Convergent Margins

    OpenAIRE

    Von Huene, R; Uyeda, S

    1981-01-01

    Investigations of convergent margins along the IPOD transects support the concept of ocean floor spreading in back-arc basins and the concept of tectonically accreted sediment at the front of convergent margins. However, not all convergent margins have large accreted complexes, and other less frequently used concepts are required in the interpretations of these convergent margins. If the present rates of plate convergence are accepted, then much sediment that entered the trenches studied is p...

  1. XAS studies on selenite reduction by pyrite

    International Nuclear Information System (INIS)

    Kang Mingliang; Liu Chunli; Chen Fanrong; Charlet, Laurnet

    2012-01-01

    The interaction of aqueous Se (IV) with pyrite were systematically investigated in light of thermodynamic calculations and X-ray Absorption Spectroscopy (XAS). The results from the speciation study reveal that the reduction product is Se (O) when natural pyrite reacts with Se (N) at pH≤5.65, while small amount of FeSeO 3 or iron selenides may be formed at pH 6.1. At pH≥6.94, due to the precipitation of Fe (Ⅲ) -oxyhydroxide, the formation of the thermodynamically most stable species, FeSe 2 , is inhibited. However, when the reactive nanopyrite-greigite was used for reaction, the thermodynamically most stable species, FeSe 2 , was found for the first time as the predominant product in the present study, suggesting that 79 Se can be immobilized in its most insoluble form, FeSe 2 , in Fe (Ⅱ) -sulfide containing environment. This study confirms that pyrite can significantly attenuate the mobility of Se by reductive precipitation, and that the reaction process does not produce protons under acidic or neutral condition when Se (O) is formed. (authors)

  2. Topological order and memory time in marginally-self-correcting quantum memory

    Science.gov (United States)

    Siva, Karthik; Yoshida, Beni

    2017-03-01

    We examine two proposals for marginally-self-correcting quantum memory: the cubic code by Haah and the welded code by Michnicki. In particular, we prove explicitly that they are absent of topological order above zero temperature, as their Gibbs ensembles can be prepared via a short-depth quantum circuit from classical ensembles. Our proof technique naturally gives rise to the notion of free energy associated with excitations. Further, we develop a framework for an ergodic decomposition of Davies generators in CSS codes which enables formal reduction to simpler classical memory problems. We then show that memory time in the welded code is doubly exponential in inverse temperature via the Peierls argument. These results introduce further connections between thermal topological order and self-correction from the viewpoint of free energy and quantum circuit depth.

  3. Determinants of banks’ net interest margins in Central and Eastern Europe

    Directory of Open Access Journals (Sweden)

    Tomislav Rizdak

    2013-03-01

    Full Text Available This research analyzes the main determinants of the net interest margin of banks operating in Central and Eastern European (CEE countries in the period from 1999 to 2010. The results reveal several main drivers of net interest margins in the CEE. Prior to 2008 the net interest margins declined primarily due to strong capital inflows and stable macroeconomic environment. In the crisis period, significant rise in government debt accompanied by the increase in macroeconomic risks and abating capital inflows were pushing margins up while other factors such as low credit demand, higher capitalization and significantly increased share of non-performing loans pressured banks’ margins down. The results also confirm the important contribution of higher efficiency to lowering banks’ margins.

  4. Estimating the marginal cost of reducing global fossil fuel CO2 emissions

    International Nuclear Information System (INIS)

    Edmonds, J.; Barns, D.W.; McDonald, S.

    1992-01-01

    This paper estimates the marginal, total, and average cost and effectiveness of carbon taxes applied either by the Organization for Economic Cooperation and Development (OECD) members alone, or as part of a global cooperative strategy, to reduce potential future emissions and their direct implications for employment in the US coal industry. Two sets of cases are examined, one set in which OECD members acts alone, and another set in which the world acts in concert. In each case set taxes are examined which achieve four alternative levels of emissions reduction: halve the rate of emissions growth, no emissions growth, 20% reduction from 1988 levels, and 50% reduction from 1988 levels. For the global cooperation case, carbon tax rates of $32, $113, $161, and $517 per metric ton of carbon (mtC) were needed in the year 2025 to achieve the objectives. Total costs were respectively $40, $178, $253, and $848 billions of 1990 US dollars per year in the year 2025. Average costs were $32, $55, $59, and $135 per mtC. Costs were significantly higher in the cases in which the OECD members states acted alone. OECD member states, acting alone, could not reduce global emissions by 50% or 20% relative to 1988, given reference case assumptions regarding developing and recently planned nations economic growth

  5. Marginal Accuracy and Internal Fit of 3-D Printing Laser-Sintered Co-Cr Alloy Copings.

    Science.gov (United States)

    Kim, Myung-Joo; Choi, Yun-Jung; Kim, Seong-Kyun; Heo, Seong-Joo; Koak, Jai-Young

    2017-01-23

    Laser sintered technology has been introduced for clinical use and can be utilized more widely, accompanied by the digitalization of dentistry and the development of direct oral scanning devices. This study was performed with the aim of comparing the marginal accuracy and internal fit of Co-Cr alloy copings fabricated by casting, CAD/CAM (Computer-aided design/Computer-assisted manufacture) milled, and 3-D laser sintered techniques. A total of 36 Co-Cr alloy crown-copings were fabricated from an implant abutment. The marginal and internal fit were evaluated by measuring the weight of the silicone material, the vertical marginal discrepancy using a microscope, and the internal gap in the sectioned specimens. The data were statistically analyzed by One-way ANOVA (analysis of variance), a Scheffe's test, and Pearson's correlation at the significance level of p = 0.05, using statistics software. The silicone weight was significantly low in the casting group. The 3-D laser sintered group showed the highest vertical discrepancy, and marginal-, occlusal-, and average- internal gaps ( p marginal discrepancy and the internal gap variables ( r = 0.654), except for the silicone weight. In this study, the 3-D laser sintered group achieved clinically acceptable marginal accuracy and internal fit.

  6. Slope failure of chalk channel margins

    DEFF Research Database (Denmark)

    Gale, A.; Anderskouv, Kresten; Surlyk, Finn

    2015-01-01

    provide evidence for recurring margin collapse of a long-lived Campanian channel. Compressionally deformed and thrust chalk hardgrounds are correlated to thicker, non-cemented chalk beds that form a broad, gentle anticline. These chalks represent a slump complex with a roll-over anticline of expanded, non......-cemented chalk in the head region and a culmination of condensed hardgrounds in the toe region. Observations strongly suggest that the slumping represents collapse of a channel margin. Farther northwards, the contemporaneous succession shows evidence of small-scale penecontemporaneous normal faulting towards...

  7. Microfluidic platform for studying the electrochemical reduction of carbon dioxide

    Science.gov (United States)

    Whipple, Devin Talmage

    Diminishing supplies of conventional energy sources and growing concern over greenhouse gas emissions present significant challenges to supplying the world's rapidly increasing demand for energy. The electrochemical reduction of carbon dioxide has the potential to address many of these issues by providing a means of storing electricity in chemical form. Storing electrical energy as chemicals is beneficial for leveling the output of clean, but intermittent renewable energy sources such as wind and solar. Electrical energy stored as chemicals can also be used as carbon neutral fuels for portable applications allowing petroleum derived fuels in the transportation sector to be replaced by more environmentally friendly energy sources. However, to be a viable technology, the electrochemical reduction of carbon dioxide needs to have both high current densities and energetic efficiencies (Chapter 1). Although many researchers have studied the electrochemical reduction of CO2 including parameters such as catalysts, electrolytes and temperature, further investigation is needed to improve the understanding of this process and optimize the performance (Chapter 2). This dissertation reports the development and validation of a microfluidic reactor for the electrochemical reduction of CO2 (Chapter 3). The design uses a flowing liquid electrolyte instead of the typical polymer electrolyte membrane. In addition to other benefits, this flowing electrolyte gives the reactor great flexibility, allowing independent analysis of each electrode and the testing of a wide variety of conditions. In this work, the microfluidic reactor has been used in the following areas: • Comparison of different metal catalysts for the reduction of CO2 to formic acid and carbon monoxide (Chapter 4). • Investigation of the effects of the electrolyte pH on the reduction of CO2 to formic acid and carbon monoxide (Chapter 5). • Study of amine based electrolytes for lowering the overpotentials for CO2

  8. Effect of Blood Contamination on Marginal Adaptation and Surface Microstructure of Mineral Trioxide Aggregate: A SEM Study

    OpenAIRE

    Amin Salem Milani; Saeed Rahimi; Mohammad Froughreyhani; Mahdi Vahid Pakdel

    2013-01-01

    Background and aims. In various clinical situations, mineral trioxide aggregate (MTA) may come into direct contact or even be mixed with blood. The aim of the present study was to evaluate the effect of exposure to blood on marginal adaptation and surface microstructure of MTA. Materials and methods. Thirty extracted human single-rooted teeth were used. Standard root canal treatment was carried out. Root-ends were resected, and retrocavities were prepared. The teeth were randomly ...

  9. Perennial Grass Bioenergy Cropping on Wet Marginal Land

    NARCIS (Netherlands)

    Das, Srabani; Teuffer, Karin; Stoof, Cathelijne R.; Walter, Michael F.; Walter, M.T.; Steenhuis, Tammo S.; Richards, Brian K.

    2018-01-01

    The control of soil moisture, vegetation type, and prior land use on soil health parameters of perennial grass cropping systems on marginal lands is not well known. A fallow wetness-prone marginal site in New York (USA) was converted to perennial grass bioenergy feedstock production. Quadruplicate

  10. In vitro analysis of the marginal adaptation and discrepancy of stainless steel crowns

    Science.gov (United States)

    Mulder, Riaan; Medhat, Rasha; Mohamed, Nadia

    2018-01-01

    Abstract Aim: The purpose of the study was to assess the marginal adaptation and discrepancy of SSC’s. Differences in adaptation and discrepancy between the four surfaces (mesial, lingual, distal, and buccal) were evaluated. Methods: The placement of stainless steel crowns were completed on a phantom head in accordance with the clinical technique. The ideal tooth preparation was made and this ‘master tooth’ duplicated to achieve a sample size of 15. The stainless steel crowns were placed, trimmed, and cemented as per the clinical technique. The cemented stainless crowns were analyzed under 100× stereomicroscope magnification. The marginal adaptation and discrepancy of each specimen was measured every 2 µm. Results: All the specimens showed marginal adaptation and discrepancy. The lingual margin had a significantly better adaptation (p steel crown adaptation and discrepancy is an essential clinical step. PMID:29536024

  11. In-Situ Optical Studies of Oxidation/Reduction Kinetics on SOFC Cermet Anodes

    Science.gov (United States)

    2010-12-28

    DATES COVERED (From - To) 1/29/10-9/30/10 4. TITLE AND SUBTITLE In situ optical studies of oxidation/reduction kinetics on SOFC cermet anodes 5a...0572 In-situ Optical Studies of Oxidation/Reduction Kinetics on SOFC Cermet Anodes Department of Chemistry and Biochemistry Montana State University...of Research In-situ Optical Studies of Oxidation/Reduction Kinetics on SOFC Cermet Anodes Principal Investigator Robert Walker Organization

  12. Analysing customers profitability via contribution margin: a study in a business sector of medium size furniture located in Serra Gaúcha.

    Directory of Open Access Journals (Sweden)

    Cheila Hastenteufel

    2015-04-01

    Full Text Available In today's competitive market, knowing the profitability of each customer is a key part to the success of a company, but to reach, this percentage, you need to adopt some procedures. This study shows procedures to be followed for the determination and analysis of profitability of major customers of a company in furniture sector. In this context, the present work was carried out by the case study method, to demonstrate the importance of knowing the profitability of customers based on contribution margin, thus improving efficiently and effectively their management process. We will present theoretical framework for the analysis of customer profitability, methods of costing and measurement of existing profitability and the profitability of customers through the contribution margin. As a conclusion, we propose using data and this proposal applied to the Bella fictitious name company.

  13. Barriers to Education for the Marginalized Adult Learner

    Science.gov (United States)

    Flynn, Sarah; Brown, Jason; Johnson, Andrew; Rodger, Susan

    2011-01-01

    This qualitative study examines barriers to adult education by the marginalized adult learner. We adopted an inclusive approach by interviewing potential adult learners who had not participated in adult education programs due to illiteracy. Five overlapping themes related to barriers emerged and were categorized as: family values and…

  14. Evaluation of the effect of different food media on the marginal integrity of class v compomer, conventional and resin-modified glass-ionomer restorations: an in vitro study.

    Science.gov (United States)

    Dinakaran, Shiji

    2015-03-01

    Cervical lesions of anterior and posterior teeth are a common finding in routine dental practice. They are of much concern to the patient, if present in esthetically sensitive regions. Adhesive tooth-colored restorative materials are generally recommended for treating such lesions. The aim of the present study was to evaluate and compare the effect of various food media (lime juice, tea, coffee, and Coca-Cola) on the marginal integrity of Class V compomer (Dyract(®)), conventional glass-ionomer (Fuji II) and resin-modified glass-ionomer (Fuji II LC improved) restorations along their cemental and enamel margins with saline as control media. After restoration of prepared Class V cavities in human premolars with the three different materials (n = 8), they were immersed in the test media for 7 days and then stained with methylene blue dye. Buccolingual sections were prepared and examined under stereomicroscope and scores (0-2) were given. Data were analyzed statistically using one-way analysis of variance in SPSS version 16.0. P Coca-Cola) compared to saline. Enamel margins showed more marginal adaptation than cemental margins.

  15. Marginal bone loss and dental implant failure may be increased in smokers.

    Science.gov (United States)

    Veitz-Keenan, Analia

    2016-03-01

    An electronic search was performed in PubMed, Web of Science and the Cochrane Central Register of Controlled Trials up to February 2015. References of included studies were also searched. No language restrictions were applied. Study selection: Prospective, retrospective and randomised clinical trials that compared marginal bone loss and failure rates between smokers and non-smokers. Implant failure was considered as total loss of the implant. Studies with patients who had periodontal disease prior to treatment or who had metabolic diseases were excluded. Two reviewers were involved in the research and screening process and disagreements were resolved by discussion. The quality of the studies was analysed using the Newcastle-Ottawa scale for non-randomised clinical trials. Data extracted from the studies included, when available: follow up period, number of subjects, smoking status, number of implants placed, implant system, implant length and diameter, healing period, antibiotics and mouth-rinse use, marginal bone loss, failure rate and drop-outs. For binary outcomes (implant failure) the estimate of the intervention effect was expressed in the form of an odds ratio (OR) with the confidence interval (CI) of 95%. For continuous outcomes (marginal bone loss) the average and standard deviation (SD) were used to calculate the standardised mean difference with a 95% CI. Meta-analysis was performed for studies with similar outcomes, I(2) a statistical test was used to express the heterogeneity among the studies. Publication bias was explored as well. A total of 15 observational studies were included in the review. The number of participants ranged from 60 to 1727 and the average age was 52.5 years. The follow-up period ranged from eight to 240 months. The total number of implants placed was 5840 in smokers and 14,683 in non-smokers. The Branemak system, (Noble Biocare AB, Goteborg, Sweden), was the most commonly used implant system. There was a statistically significant

  16. Development and function of the splenic marginal zone

    NARCIS (Netherlands)

    Mebius, Reina E.; Nolte, Martijn A.; Kraal, Georg

    2004-01-01

    The marginal zone of the spleen is a crucial region where blood-borne pathogens are sequestered by macrophages with unique arrays of scavenger molecules. In addition, a special population of B cells, which is capable of rapid activation, resides in this region. Marginal zone B cells and macrophages

  17. Advancing land-terminating ice margin in North Greenland - characteristics, evolution, and first field measurements

    Science.gov (United States)

    Steiner, J. F.; Prinz, R.; Abermann, J.

    2017-12-01

    More than 40% of the ice sheet in North Greenland terminate on land, however the characteristics of this ice margin and response to a changing climate have so far received little attention. While land-terminating ice cliffs are a feature commonly found and studied in other regions, detailed investigations in Greenland were only carried out more than six decades ago in the Thule area (Red Rock, Northwest Greenland). These studies showed a continuous advance at one location over multiple years, while the local mass balance was reported negative. The purpose of our study is to revisit the location previously studied and extend the analysis to the complete Northern ice margin employing newly available high-resolution digital terrain models (Arctic DEM). First results show that the advance at Red Rock is indeed long-term, continuing unabated today at rates of up to several meter per year. Similar magnitudes were found for large other stretches along the ice margin. With our study we aim to show (a) the main characteristics of the land-terminating ice margin in Northern Greenland, namely its slope and aspect distribution and comparison to spatial datasets of flow velocity and mass balance and (b) to provide further explanations of physical processes driving the advance. We have therefore mapped the complete ice margin and present the first results of this analysis. First field work provides new data on energy fluxes and ice temperatures at the Red Rock site as well as high resolution DEMs obtained with the use of UAVs.

  18. Do marginal investments made by NHS healthcare commissioners in the UK produce the outcomes they hope to achieve? Observational study.

    Science.gov (United States)

    O'Cathain, Alicia; Sampson, Fiona; Strong, Mark; Pickin, Mark; Goyder, Elizabeth; Dixon, Simon

    2015-11-06

    To investigate the effect of targeted marginal annual investments by local healthcare commissioners on the outcomes they expected to achieve with these investments. Controlled before and after study. 152 commissioning organisations (primary care trusts) in England. National surveys of commissioning managers in 2009 and 2010 to identify: the largest marginal investments made in four key conditions/services (diabetes, coronary heart disease, chronic pulmonary airways disease and emergency and urgent care) in 2008/2009 and 2009/2010; the outcomes commissioners expected to achieve with these investments; and the processes commissioners used to develop these investments. Collation of routinely available data on outcomes commissioners expected from these investments over the period 2007/2008 to 2010/2011. 51% (77/152) of commissioners agreed to participate in the survey in 2009 and 60% (91/152) in 2010. Around half reported targeted marginal investments in each condition/service each year. Routine data on many of the outcomes they expected to achieve through these investments were not available. Also, commissioners expected some outcomes to be achieved beyond the time scale of our study. Therefore, only a limited number of outcomes of investments were tested. Outcomes included directly standardised emergency admission rates for the four conditions/services, and the percentage of patients with diabetes with glycated haemoglobin investments reduced emergency admission rates. There was evidence of an improvement in blood glucose management for diabetes for commissioners investing to improve diabetes care but this was compromised by a change in how the outcome was measured in different years. This investment was unlikely to be cost-effective. Commissioners made marginal investments in specific health conditions and services with the aim of improving a wide range of outcomes. There was little evidence of impact on the limited number of outcomes measured. Published by the BMJ

  19. The effect of differentiated margin on futures market investors' behavior and structure An experimental research

    Institute of Scientific and Technical Information of China (English)

    Jin-hui Luo; Di-fang Wan; Yang Yang; Guang Yang

    2011-01-01

    Purpose-The purpose of this paper is to empirically analyze the role of differentiated margin system in leading investors' investing behavior and then optimize investor structure in futures markets.Design/methodology/approach-Using economic experimental research method,this paper designs and conducts a futures market experiment according to experimental research's basic norms,thus acquiring needed and credible empirical data.Findings-By analyzing the experimental data,it is found that compared with situations in futures markets that implement uniform margin system,investors' (especially speculators') futures open position and the ratio of their open position and futures turnover are both significantly higher,in futures markets that implement differentiated margin system.On the other hand,differentiated margin system has no effects on hedgers' futures turnover,but significantly reduces speculators' futures turnover.Research limitations/implications-The findings suggest that compared with uniform margin system,differentiated margin system is beneficial to effectively restrict both speculators' and hedgers' speculating behavior and lead hedgers' market participation.Practical implications-In order to resolve the problem of unreasonable investor structure in China's futures market,i.e.lack of hedgers and over-speculating China's futures market's regulators should reform the margin system and adopt differentiated margin system to lead investors' rational behavior and optimize investor structure.Originality/value-This paper empirically analyzes and verifies,for the first time,the roles of differentiated margin system in affecting investors' investing behavior.The futures market experiment designed and used in this study is a pioneering and exploratory experiment.

  20. The Role of Seminal Vesicle Motion in Target Margin Assessment for Online Image-Guided Radiotherapy for Prostate Cancer

    International Nuclear Information System (INIS)

    Liang Jian; Wu Qiuwen; Yan Di

    2009-01-01

    Purpose: For patients with intermediate- and high-risk prostate cancer, the seminal vesicles (SVs) are included in the clinical target volume (CTV). The purposes of this study are to investigate interfraction motion characteristics of the SVs and determine proper margins for online computed tomography image guidance. Methods and Materials: Twenty-four patients, each with 16 daily helical computed tomography scans, were included in this study. A binary image mask was used for image registration to determine daily organ motion. Two online image-guided radiotherapy strategies (prostate only and prostate + SVs) were simulated in a hypofractionated scheme. Three margin designs were studied for both three-dimensional conformal radiotherapy and intensity-modulated radiotherapy (IMRT). In prostate-only guidance, Margin A was uniformly applied to the whole CTV, and Margin B was applied to the SVs with a fixed 3-mm prostate margin. In prostate plus SV guidance, Margin C was uniformly applied to the CTV. The minimum margins were sought to satisfy the criterion that minimum cumulative CTV dose be more than those of the planning target volume in the plan for greater than 95% of patients. Results: The prostate and SVs move significantly more in the anterior-posterior and superior-inferior than right-left directions. The anterior-posterior motion of the prostate and SVs correlated (R 2 = 0.7). The SVs move significantly more than the prostate. The minimum margins found were 2.5 mm for three-dimensional conformal radiotherapy and 4.5, 4.5, and 3.0 mm for Margins A, B, and C for IMRT, respectively. Margins for IMRT were larger, but the irradiated volume and doses to critical structures were smaller. Minimum margins of 4.5 mm to the SVs and 3 mm to the prostate are recommended for IMRT with prostate-only guidance. Conclusions: The SVs move independently from the prostate gland, and additional margins are necessary for image-guided radiotherapy

  1. Marginally Deformed Starobinsky Gravity

    DEFF Research Database (Denmark)

    Codello, A.; Joergensen, J.; Sannino, Francesco

    2015-01-01

    We show that quantum-induced marginal deformations of the Starobinsky gravitational action of the form $R^{2(1 -\\alpha)}$, with $R$ the Ricci scalar and $\\alpha$ a positive parameter, smaller than one half, can account for the recent experimental observations by BICEP2 of primordial tensor modes....

  2. Komorbiditet ved marginal parodontitis

    DEFF Research Database (Denmark)

    Holmstrup, Palle; Damgaard, Christian; Olsen, Ingar

    2017-01-01

    Nærværende artikel præsenterer en oversigt over den foreliggende væsentligste viden om sammenhængen mellem marginal parodontitis og en række medicinske sygdomme, herunder hjerte-kar-sygdomme, diabetes mellitus, reumatoid arthritis, osteoporose, Parkinsons sygdom, Alzheimers sygdom, psoriasis og...

  3. From marginality to further marginalization: Experiences from the victims of the July 2000 Payatas trashslide in the Philippines

    Directory of Open Access Journals (Sweden)

    JC Gaillard

    2009-04-01

    Full Text Available Victims of disasters are disproportionately drawn from the marginalized segments of society. Disaster victims are marginalized geographically because they live in hazardous places, socially because they are members of minority groups, economically because they are poor, and marginalized politically because their voice is disregarded by those with political power. #e victims of the July 2000 Payatas trash slide in the Philippines show all these characteristics. Most of the victims of the disaster were urban migrants who came all the way from their poor provinces to settle on the lower slopes of the largest dumpsite of the country. #ey scavenged recyclable materials to sell as a way to make a living, but their limited incomes did not allow them to a$ord safer locations for their homes, farther removed from the slopes of the dumpsite. On the morning of 10 July 2000, 300 of them lost their lives when a large section of the dumpsite collapsed in a massive debris %ow which buried their houses. In the aftermath of the disaster, the survivors who used to live on the dumpsite, and who were the poorest victims, were also those who were relocated by the Philippine government. In the present case, the most vulnerable families in the face of the trash slide were eventually those who had to su#er again from life-disrupting relocation while being the less able to recover quickly from the disaster. Daily incomes of relocated families are today much lower than those who remained in the vicinity of the dumpsite. For the victims of the July 2000 Payatas tragedy, poverty thus acted as a vicious, worsening circle which ranged from vulnerability to poor recovery, or from marginality to further marginalization.

  4. Evaluation and comparison of the marginal adaptation of two different substructure materials.

    Science.gov (United States)

    Karaman, Tahir; Ulku, Sabiha Zelal; Zengingul, Ali Ihsan; Guven, Sedat; Eratilla, Veysel; Sumer, Ebru

    2015-06-01

    In this study, we aimed to evaluate the amount of marginal gap with two different substructure materials using identical margin preparations. Twenty stainless steel models with a chamfer were prepared with a CNC device. Marginal gap measurements of the galvano copings on these stainless steel models and Co-Cr copings obtained by a laser-sintering method were made with a stereomicroscope device before and after the cementation process and surface properties were evaluated by scanning electron microscopy (SEM). A dependent t-test was used to compare the mean of the two groups for normally distributed data, and two-way variance analysis was used for more than two data sets. Pearson's correlation analysis was also performed to assess relationships between variables. According to the results obtained, the marginal gap in the galvano copings before cementation was measured as, on average, 24.47 ± 5.82 µm before and 35.11 ± 6.52 µm after cementation; in the laser-sintered Co-Cr structure, it was, on average, 60.45 ± 8.87 µm before and 69.33 ± 9.03 µm after cementation. A highly significant difference (Pcementation were within the clinically acceptable level. The smallest marginal gaps occurred with the use of galvano copings.

  5. A consumer-based approach to salt reduction: Case study with bread.

    Science.gov (United States)

    Antúnez, Lucía; Giménez, Ana; Ares, Gastón

    2016-12-01

    In recent years high sodium intake has raised growing concern worldwide. A widespread reduction of salt concentration in processed foods has been claimed as one of the most effective strategies to achieve a short-term impact on global health. However, one of the major challenges in reducing salt in food products is its potential negative impact on consumer perception. For this reason, gradual salt reduction has been recommended. In this context, the aim of the present work was to present a consumer-based approach to salt reduction, using bread as case study. Two consumer studies with a total of 303 consumers were carried out. In the first study, four sequential difference thresholds were determined through paired-comparison tests, starting at a salt concentration of 2%. In the second study, 99 consumers performed a two-bite evaluation of their sensory and hedonic perception of five bread samples: a control bread containing 2% salt and four samples with reduced salt content according to the difference thresholds determined in the first study. Survival analysis was used to determine average difference thresholds, which ranged from 9.4% to 14.3% of the salt concentration of the control bread. Results showed that salt concentration significantly influenced consumer overall liking of the bread samples. However, large heterogeneity was found in consumer hedonic reaction towards salt reduction: two groups of consumers with different preference and hedonic sensitivity to salt reduction were found. Results from the present work confirm that cumulative series of small salt reductions may be a feasible strategy for reducing the sodium content of bread without affecting consumer hedonic perception and stress the importance of considering consumer perception in the design of gradual salt reduction programmes. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Marginal bone and soft tissue behavior following platform switching abutment connection/disconnection--a dog model study.

    Science.gov (United States)

    Alves, Célia C; Muñoz, Fernando; Cantalapiedra, António; Ramos, Isabel; Neves, Manuel; Blanco, Juan

    2015-09-01

    The effect on the marginal peri-implant tissues following repeated platform switching abutment removal and subsequent reconnection was studied. Six adult female Beagle dogs were selected, and Pm3 and Pm4 teeth, both left and right sides, were extracted and the sites healed for 3 months. At this time, 24 bone level (BL) (Straumann, Basel, Switzerland) Ø 3.3/8 mm implants were placed, 2 in each side on Pm3 and Pm4 regions. In one side (control group), 12 bone level conical Ø 3.6 mm healing abutments and, on the other side (test group), 12 Narrow CrossFit (NC) multibase abutments (Straumann) , Basel, Switzerland) were connected at time of implant surgery. On test group, all prosthetic procedures were carried out direct to multibase abutment without disconnecting it, where in the control group, the multibase abutment was connected/disconnected five times (at 6/8/10/12/14 weeks) during prosthetic procedures. Twelve fixed metal bridges were delivered 14 weeks after implant placement. A cleaning/control appointment was scheduled 6 months after implant placement. The animals were sacrificed at 9 months of the study. Clinical parameters and peri-apical x-rays were registered in every visit. Histomorphometric analysis was carried out for the 24 implants. The distance from multibase abutment shoulder to the first bone implant contact (S-BIC) was defined as the primary histomorphometric parameter. Wilcoxon comparison paired test (n = 6) found no statistically significant differences (buccal P = 0.917; Lingual P = 0.463) between test and control groups both lingually and buccally for S-BIC distance. Only Pm3 buccal aBE-BC (distance from the apical end of the barrier epithelium to the first bone implant contact) (P = 0.046) parameter presented statistically significant differences between test and control groups. Control group presented 0.57 mm more recession than test group, being this difference statistically significant between the two groups (P < 0.001). It can be conclude

  7. Do Robotic Surgical Systems Improve Profit Margins? A Cross-Sectional Analysis of California Hospitals.

    Science.gov (United States)

    Shih, Ya-Chen Tina; Shen, Chan; Hu, Jim C

    2017-09-01

    The aim of this study was to examine the association between ownership of robotic surgical systems and hospital profit margins. This study used hospital annual utilization data, annual financial data, and discharge data for year 2011 from the California Office of Statewide Health Planning and Development. We first performed bivariate analysis to compare mean profit margin by hospital and market characteristics and to examine whether these characteristics differed between hospitals that had one or more robotic surgical systems in 2011 and those that did not. We applied the t test and the F test to compare mean profit margin between two groups and among three or more groups, respectively. We then conducted multilevel logistic regression to determine the association between ownership of robotic surgical systems and having a positive profit margin after controlling for other hospital and market characteristics and accounting for possible correlation among hospitals located within the same market. The study sample included 167 California hospitals with valid financial information. Hospitals with robotic surgical systems tended to report more favorable profit margins. However, multilevel logistic regression showed that this relationship (an association, not causality) became only marginally significant (odds ratio [OR] = 6.2; P = 0.053) after controlling for other hospital characteristics, such as ownership type, teaching status, bed size, and surgical volumes, and market characteristics, such as total number of robotic surgical systems owned by other hospitals in the same market area. As robotic surgical systems become widely disseminated, hospital decision makers should carefully evaluate the financial and clinical implications before making a capital investment in this technology. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  8. Radiotherapy Results of Carcinoma of Cervix with positive Resection Margin

    International Nuclear Information System (INIS)

    Huh, Seung Jae; Kim, Dae Yong; Ahn, Yong Chan; Kim, Won Dong; Wu, Hong Gyun; Ha, Sung Whan; Kim, Il Han; Park, Charn Il

    1996-01-01

    Purpose : Patients with cervical cancer who have positive resection margins after radical hysterectomy are at increased risk for local recurrence. The results of postoperative pelvic radiotherapy for cervix cancer with positive resection margins were analyzed to evaluated the role of radiotherapy. Materials and Methods : Between 1979 and 1992, 60 patients of cervix carcinoma were treated with postoperative radiotherapy after radical hysterectomy because of positive vaginal(48 patients) or parametrial resection margins(12 patients). Patients were treated with external beam radiation therapy(EBRT) alone (12 patients) or EBRT plus vaginal ovoid irradiation (VOI) (48 patients). The median follow-up period was 5 months. Results : The 5-year actuarial disease free and overall survival rates for all patients were 75.2%, 84.1%, respectively. The overall recurrence rate was 23%(14/60). In 48 patients with positive vaginal resection margins, the pelvic recurrence was 8%(4/48). Distant metastasis was 15%(7/48). Of the 43 patients with positive vaginal resection margins treated with EBRT and VOI, recurrence rate was 21%(9/43), while recurrence rate was 40%(2/5) in the EBRT only treated group. In 12 patients with positive parametrial margins, three patients (25%) had distant metastases. The most significant prognostic factor was lymph node metastasis. Complications resulting from radiotherapy occurred at a rate of 32%(19/60) and grade III complications occurred in three patients (5%). Conclusion : Postoperative radiotherapy can produce excellent pelvic control rates in patients with positive resection margins. In patients with positive vaginal margins, whole pelvic EBRT and BOI is recommended

  9. Retail margins and the effects of an integrated Nordic end user market for electricity

    Energy Technology Data Exchange (ETDEWEB)

    Damsgaard, Niclas; Roempoetti, Marie

    2007-09-15

    There is an ongoing discussion about the need for further and deeper integration of the Nordic electricity market. Following the Nordic Council of Minister's summit in Akureyri in 2004 this work has been intensified. NordREG and Nordel have produced several studies on the integration of the market. Work is currently being done on a Nordic common market platform for balancing services and a Nordic balancing agreement, the market design for a common market and a common model for supply switches and several other issues. This study should be seen in relationship with these other studies and we have deliberately aimed at avoiding overlaps. An integrated Nordic retail market for electricity would in principle imply a common market for 14 million customers served by several hundred retail companies. The question asked in this study is what are the benefits for the customers of such a development? In order to create a common Nordic market there are several barriers that needs to be overcome. There are technical barriers such as differences in IT-systems, regulatory barriers caused by differences in e.g. the responsibilities and the regulation of the DSOs and finally of course business barriers that exists for all cross-border businesses. A well-functioning Nordic retail market would lead to price equalisation - at least if the costs are equal. This would mean that particularly customers in areas with high retail margins could benefit from a joint Nordic market. Furthermore, dilution of market power could lead to more intense competition which in turn both could lead to lower costs and lower margins. In this report we focus on the possible direct effects on prices. In addition to this it is likely that there are efficiency gains, for instance through decreased costs in developing IT-systems etc. for a larger market which would decrease costs both for the suppliers and for DSOs. There might also be other economies-of-scales arising from a larger market. The possible

  10. Marginal microleakage of class V resin-based composite restorations bonded with six one-step self-etch systems

    Directory of Open Access Journals (Sweden)

    Alfonso Sánchez-Ayala

    2013-06-01

    Full Text Available This study compared the microleakage of class V restorations bonded with various one-step self-etching adhesives. Seventy class V resin-based composite restorations were prepared on the buccal and lingual surfaces of 35 premolars, by using: Clearfil S 3 Bond, G-Bond, iBond, One Coat 7.0, OptiBond All-In-One, or Xeno IV. The Adper Single Bond etch-and-rinse two-step adhesive was employed as a control. Specimens were thermocycled for 500 cycles in separate water baths at 5°C and 55°C and loaded under 40 to 70 N for 50,000 cycles. Marginal microleakage was measured based on the penetration of a tracer agent. Although the control showed no microleakage at the enamel margins, there were no differences between groups (p = 0.06. None of the adhesives avoided microleakage at the dentin margins, and they displayed similar performances (p = 0.76. When both margins were compared, iBond® presented higher microleakage (p < 0.05 at the enamel margins (median, 1.00; Q3–Q1, 1.25–0.00 compared to the dentin margins (median, 0.00; Q3–Q1, 0.25–0.00. The study adhesives showed similar abilities to seal the margins of class V restorations, except for iBond®, which presented lower performance at the enamel margin.

  11. Experimental study on solid state reduction of chromite with rising temperature

    Energy Technology Data Exchange (ETDEWEB)

    Kekkonen, M.; Syynimaa, A.; Holappa, L.

    1998-07-01

    The solid state reduction of preoxidized sintered chromite pellets, raw pellets, process pellets and lumpy ores have been studied with rising temperature 700-1520 deg C under CO-atmosphere in order to better simulate the conditions in the upper part of a real submerged arc furnace. According to the reduction degree curves the reduction behaviour of chromite pellets seems to be similar. The reduction rate was slow at the beginning but increased rapidly when the temperature reached about 1000 deg C. The final reduction degree was highest in the case of process pellets and lowest in the case of raw pellet. In the case of preoxidized pellets there was not much difference of the reduction rate and final reduction degree between different oxidation states. In the case of lumpy ores the reduction rate and the final reduction degree was much lower compared to the pellets. Optical photographs, phase and microanalysis show that the reduction has proceeded further in the surface of the samples and confirmed also that the reduction degree remained lower in the case of raw pellet and lumpy ores which was also seen from the reduction degree curves. According to the experiments in the case of preoxidized pellets the effect of oxidation state on the reduction rate was not observed due to small difference in the oxidation state of the samples. But when comparing the reduction of preoxidized pellets and unoxidised raw pellet we can say that preoxidation promotes the reduction. The final reduction degree of the raw pellet remained lower than in the case of preoxidized pellets. (orig.)

  12. Reproductive tract infections: Attitude and barriers among marginalized fisher women in Kerala, South India.

    Science.gov (United States)

    Thomas, Manoj A; Narayan, Poornima

    2017-04-01

    Reproductive tract infections (RTIs) are the cause of severe gynecological and maternal morbidity in India. In marginalized communities, women persevere quietly when faced with a culturally sensitive health issue such as an RTI. To hypothesize on the differential health behavior and low levels of reported incidents among women living in marginalized communities, we undertake an exploratory study in a coastal fishermen community in South India. We identify barriers influencing decisions to seek curative and preventive medical care. Public health practitioners and social workers may find our recommendations relevant for addressing health issues in marginalized communities.

  13. Breast Conservation Therapy: The Influence of Molecular Subtype and Margins

    International Nuclear Information System (INIS)

    Demirci, Senem; Broadwater, Gloria; Marks, Lawrence B.; Clough, Robert; Prosnitz, Leonard R.

    2012-01-01

    Purpose: To evaluate treatment results and prognostic factors, especially margin status and molecular subtype, in early-stage breast cancer patients treated with breast conservation therapy (BCT). Methods and Materials: The records of 1,058 Stage I or II breast cancer patients treated with BCT (surgical excision plus radiotherapy) at Duke University Medical Center, Durham, North Carolina, from 1985–2005 were retrospectively reviewed. Conventional receptor analyses were used as surrogate markers for molecular subtype classification (luminal A, luminal B, Her2 positive, and basal like). Actuarial estimates of overall survival (OS), cause-specific survival (CSS), failure-free survival, and locoregional control (LRC) were computed by use of Kaplan-Meier plots. We analyzed prognostic variables for significance using Cox proportional hazards univariate and multivariate analysis. The study was approved by the Duke University Medical Center Institutional Review Board. Results: The median age of the patients was 56 years (range, 18–89 years). Of the patients, 80% had T1 disease and 66% N0 disease pathologically. With a median follow-up of 9.8 years, an in-breast recurrence developed in 53 patients and 10 patients had nodal failure. For all patients, the 10-year CSS rate was 94%; LRC rate, 94%; and failure-free survival rate, 88%. Luminal A patients had a CSS rate of 95% and LRC rate of 99%. Basal-type patients appeared to do worse, with regard to both CSS rate (74%) and LRC rate (76%), but the numbers were small and the difference was not statistically significant. LRC rates of patients with negative margins (widely negative, close, and extent of margin not known) were virtually identical (93%, 96%, and 94%, respectively). Those with positive margins appeared to fare slightly worse based on LRC rate (88%), but again, the numbers were small and the difference was not statistically significant. Conclusions: BCT remains the treatment of choice for early-stage breast cancer

  14. Breast Conservation Therapy: The Influence of Molecular Subtype and Margins

    Energy Technology Data Exchange (ETDEWEB)

    Demirci, Senem, E-mail: senem.demirci@ege.edu.tr [Department of Radiation Oncology, Duke University Medical Center, Durham, NC (United States); Department of Radiation Oncology, Ege University Faculty of Medicine, Izmir (Turkey); Broadwater, Gloria [Department of Biostatistics and Bioinformatics, Duke Cancer Institute, Durham, NC (United States); Cancer and Leukemia Group B Statistical Center, Duke Cancer Institute, Durham, NC (United States); Marks, Lawrence B. [Department of Radiation Oncology, University of North Carolina School of Medicine, Chapel Hill, NC (United States); Clough, Robert; Prosnitz, Leonard R. [Department of Radiation Oncology, Duke University Medical Center, Durham, NC (United States)

    2012-07-01

    Purpose: To evaluate treatment results and prognostic factors, especially margin status and molecular subtype, in early-stage breast cancer patients treated with breast conservation therapy (BCT). Methods and Materials: The records of 1,058 Stage I or II breast cancer patients treated with BCT (surgical excision plus radiotherapy) at Duke University Medical Center, Durham, North Carolina, from 1985-2005 were retrospectively reviewed. Conventional receptor analyses were used as surrogate markers for molecular subtype classification (luminal A, luminal B, Her2 positive, and basal like). Actuarial estimates of overall survival (OS), cause-specific survival (CSS), failure-free survival, and locoregional control (LRC) were computed by use of Kaplan-Meier plots. We analyzed prognostic variables for significance using Cox proportional hazards univariate and multivariate analysis. The study was approved by the Duke University Medical Center Institutional Review Board. Results: The median age of the patients was 56 years (range, 18-89 years). Of the patients, 80% had T1 disease and 66% N0 disease pathologically. With a median follow-up of 9.8 years, an in-breast recurrence developed in 53 patients and 10 patients had nodal failure. For all patients, the 10-year CSS rate was 94%; LRC rate, 94%; and failure-free survival rate, 88%. Luminal A patients had a CSS rate of 95% and LRC rate of 99%. Basal-type patients appeared to do worse, with regard to both CSS rate (74%) and LRC rate (76%), but the numbers were small and the difference was not statistically significant. LRC rates of patients with negative margins (widely negative, close, and extent of margin not known) were virtually identical (93%, 96%, and 94%, respectively). Those with positive margins appeared to fare slightly worse based on LRC rate (88%), but again, the numbers were small and the difference was not statistically significant. Conclusions: BCT remains the treatment of choice for early-stage breast cancer

  15. Estimation of Model's Marginal likelihood Using Adaptive Sparse Grid Surrogates in Bayesian Model Averaging

    Science.gov (United States)

    Zeng, X.

    2015-12-01

    A large number of model executions are required to obtain alternative conceptual models' predictions and their posterior probabilities in Bayesian model averaging (BMA). The posterior model probability is estimated through models' marginal likelihood and prior probability. The heavy computation burden hinders the implementation of BMA prediction, especially for the elaborated marginal likelihood estimator. For overcoming the computation burden of BMA, an adaptive sparse grid (SG) stochastic collocation method is used to build surrogates for alternative conceptual models through the numerical experiment of a synthetical groundwater model. BMA predictions depend on model posterior weights (or marginal likelihoods), and this study also evaluated four marginal likelihood estimators, including arithmetic mean estimator (AME), harmonic mean estimator (HME), stabilized harmonic mean estimator (SHME), and thermodynamic integration estimator (TIE). The results demonstrate that TIE is accurate in estimating conceptual models' marginal likelihoods. The BMA-TIE has better predictive performance than other BMA predictions. TIE has high stability for estimating conceptual model's marginal likelihood. The repeated estimated conceptual model's marginal likelihoods by TIE have significant less variability than that estimated by other estimators. In addition, the SG surrogates are efficient to facilitate BMA predictions, especially for BMA-TIE. The number of model executions needed for building surrogates is 4.13%, 6.89%, 3.44%, and 0.43% of the required model executions of BMA-AME, BMA-HME, BMA-SHME, and BMA-TIE, respectively.

  16. From Marginalized to Validated: An In-Depth Case Study of an Asian American, Native American and Pacific Islander Serving Institution

    Science.gov (United States)

    Nguyen, Thai-Huy; Nguyen, Mike Hoa; Nguyen, Bach Mai Dolly; Gasman, Marybeth; Conrad, Clifton

    2018-01-01

    This article highlights the capacity of an Asian American, Native American and Pacific Islander Institution (AANAPISI) to serve as an institutional convertor--by addressing challenges commonly associated with marginalized students--for low-income, Asian American and Pacific Islander students entering college. Through an in-depth case study, we…

  17. Mean-Variance Portfolio Selection with Margin Requirements

    Directory of Open Access Journals (Sweden)

    Yuan Zhou

    2013-01-01

    Full Text Available We study the continuous-time mean-variance portfolio selection problem in the situation when investors must pay margin for short selling. The problem is essentially a nonlinear stochastic optimal control problem because the coefficients of positive and negative parts of control variables are different. We can not apply the results of stochastic linearquadratic (LQ problem. Also the solution of corresponding Hamilton-Jacobi-Bellman (HJB equation is not smooth. Li et al. (2002 studied the case when short selling is prohibited; therefore they only need to consider the positive part of control variables, whereas we need to handle both the positive part and the negative part of control variables. The main difficulty is that the positive part and the negative part are not independent. The previous results are not directly applicable. By decomposing the problem into several subproblems we figure out the solutions of HJB equation in two disjoint regions and then prove it is the viscosity solution of HJB equation. Finally we formulate solution of optimal portfolio and the efficient frontier. We also present two examples showing how different margin rates affect the optimal solutions and the efficient frontier.

  18. Disparities at the intersection of marginalized groups

    Science.gov (United States)

    Jackson, John W.; Williams, David R.; VanderWeele, Tyler J.

    2016-01-01

    Mental health disparities exist across several dimensions of social inequality, including race/ethnicity, socioeconomic status and gender. Most investigations of health disparities focus on one dimension. Recent calls by researchers argue for studying persons who are marginalized in multiple ways, often from the perspective of intersectionality, a theoretical framework applied to qualitative studies in law, sociology, and psychology. Quantitative adaptations are emerging but there is little guidance as to what measures or methods are helpful. Here, we consider the concept of a joint disparity and its composition, show that this approach can illuminate how outcomes are patterned for social groups that are marginalized across multiple axes of social inequality, and compare the insights gained with that of other measures of additive interaction. We apply these methods to a cohort of males from the National Longitudinal Survey of Youth, examining disparities for black males with low early life SES vs. white males with high early life SES across several outcomes that predict mental health, including unemployment, wages, and incarceration. We report striking disparities in each outcome, but show that the contribution of race, SES, and their intersection varies. PMID:27531592

  19. A 5-year comparison of marginal bone level following immediate loading of single-tooth implants placed in healed alveolar ridges and extraction sockets in the maxilla.

    Science.gov (United States)

    Berberi, Antoine N; Sabbagh, Joseph M; Aboushelib, Moustafa N; Noujeim, Ziad F; Salameh, Ziad A

    2014-01-01

    The aim of present investigation was to evaluate marginal bone level after 5-year follow-up of implants placed in healed ridges and fresh extraction sockets in maxilla with immediate loading protocol. Thirty-six patients in need of a single-tooth replacement in the anterior maxilla received 42 Astra Tech implants (Astra Tech Implant system™, Dentsply Implants, Mölndal, Sweden). Implants were placed either in healed ridges (group I) or immediately into fresh extraction sockets (group II). Implants were restored and placed into functional loading immediately by using a prefabricated abutment. Marginal bone level relative to the implant reference point was recorded at implant placement, crown cementation, 12, 36, and 60 months following loading using intra-oral radiographs. Measurements were made on the mesial and distal sides of each implant. Overall, two implants were lost from the group II, before final crown cementation: they were excluded from the study. The mean change in marginal bone loss (MBL) after implant placement was 0.26 ± 0.161 mm for 1 year, and 0.26 ± 0.171 mm for 3 years, and 0.21 ± 0.185 mm for 5 years in extraction sockets and was 0.26 ± 0.176 mm for 1 year and 0.21 ± 0.175 mm for 3 years, and 0.19 ± 0.172 mm for 5 years in healed ridges group. Significant reduction of marginal bone was more pronounced in implants inserted in healed ridges (P sockets (P sockets or healed ridges were similar. Functional loading technique by using prefabricated abutment placed during the surgery time seems to maintain marginal bone around implant in both healed and fresh extraction sites.

  20. A 5-year comparison of marginal bone level following immediate loading of single-tooth implants placed in healed alveolar ridges and extraction sockets in the maxilla

    Science.gov (United States)

    Berberi, Antoine N.; Sabbagh, Joseph M.; Aboushelib, Moustafa N.; Noujeim, Ziad F.; Salameh, Ziad A.

    2014-01-01

    Purpose: The aim of present investigation was to evaluate marginal bone level after 5-year follow-up of implants placed in healed ridges and fresh extraction sockets in maxilla with immediate loading protocol. Materials and Methods: Thirty-six patients in need of a single-tooth replacement in the anterior maxilla received 42 Astra Tech implants (Astra Tech Implant system™, Dentsply Implants, Mölndal, Sweden). Implants were placed either in healed ridges (group I) or immediately into fresh extraction sockets (group II). Implants were restored and placed into functional loading immediately by using a prefabricated abutment. Marginal bone level relative to the implant reference point was recorded at implant placement, crown cementation, 12, 36, and 60 months following loading using intra-oral radiographs. Measurements were made on the mesial and distal sides of each implant. Results: Overall, two implants were lost from the group II, before final crown cementation: they were excluded from the study. The mean change in marginal bone loss (MBL) after implant placement was 0.26 ± 0.161 mm for 1 year, and 0.26 ± 0.171 mm for 3 years, and 0.21 ± 0.185 mm for 5 years in extraction sockets and was 0.26 ± 0.176 mm for 1 year and 0.21 ± 0.175 mm for 3 years, and 0.19 ± 0.172 mm for 5 years in healed ridges group. Significant reduction of marginal bone was more pronounced in implants inserted in healed ridges (P prefabricated abutment placed during the surgery time seems to maintain marginal bone around implant in both healed and fresh extraction sites. PMID:24550840